From b78673944b22b662b270c8bba5c198f19e4ee4e1 Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Share parts of mmconfig code between i386 and x86-64 i386 and x86-64 pci mmconfig code have a lot in common. So share what's shareable between the two. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/pci/Makefile | 3 +- arch/x86_64/pci/mmconfig.c | 76 ++++++++-------------------------------------- 2 files changed, 14 insertions(+), 65 deletions(-) (limited to 'arch/x86_64') diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index 149aba05a5b8..c9eddc8859c0 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -11,7 +11,7 @@ obj-y += fixup.o init.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special -obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o obj-$(CONFIG_NUMA) += k8-bus.o @@ -24,3 +24,4 @@ fixup-y += ../../i386/pci/fixup.o i386-y += ../../i386/pci/i386.o init-y += ../../i386/pci/init.o early-y += ../../i386/pci/early.o +mmconfig-shared-y += ../../i386/pci/mmconfig-shared.o diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index faabb6e87f12..0847735bb31e 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -19,9 +19,7 @@ /* Verify the first 16 busses. We assume that systems with more busses get MCFG right. */ -#define MAX_CHECK_BUS 16 - -static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS); +#define PCI_MMCFG_MAX_CHECK_BUS 16 /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { @@ -63,8 +61,8 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) { char __iomem *addr; - if (seg == 0 && bus < MAX_CHECK_BUS && - test_bit(32*bus + PCI_SLOT(devfn), fallback_slots)) + if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && + test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots)) return NULL; addr = get_virt(seg, bus); if (!addr) @@ -135,63 +133,16 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -/* K8 systems have some devices (typically in the builtin northbridge) - that are only accessible using type1 - Normally this can be expressed in the MCFG by not listing them - and assigning suitable _SEGs, but this isn't implemented in some BIOS. - Instead try to discover all devices on bus 0 that are unreachable using MM - and fallback for them. */ -static __init void unreachable_devices(void) -{ - int i, k; - /* Use the max bus number from ACPI here? */ - for (k = 0; k < MAX_CHECK_BUS; k++) { - for (i = 0; i < 32; i++) { - u32 val1; - char __iomem *addr; - - pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1); - if (val1 == 0xffffffff) - continue; - addr = pci_dev_base(0, k, PCI_DEVFN(i, 0)); - if (addr == NULL|| readl(addr) != val1) { - set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE "PCI: No mmconfig possible" - " on device %02x:%02x\n", k, i); - } - } - } -} - -void __init pci_mmcfg_init(int type) +int __init pci_mmcfg_arch_init(void) { int i; - - if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return; - - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", - (unsigned long)pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } - - pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); + pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * + pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); - return; + return 0; } + for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address, @@ -200,14 +151,11 @@ void __init pci_mmcfg_init(int type) printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " "segment %d\n", pci_mmcfg_config[i].pci_segment); - return; + return 0; } - printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n", - (unsigned long)pci_mmcfg_config[i].address); + printk(KERN_INFO "PCI: Using MMCONFIG at %Lx\n", + pci_mmcfg_config[i].address); } - - unreachable_devices(); - raw_pci_ops = &pci_mmcfg; - pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + return 1; } -- cgit v1.2.2