From 2eb2a4368273e123d2716a704c86f3130aa14c22 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 19 Jun 2009 16:00:00 +0900 Subject: sh: SH7786 SMP support. SH7786 is roughly identical to SH-X3 proto SMP, though there are only 2 CPUs. This just wraps in to the existing SH-X3 SMP code with some minor changes for SH7786, including wiring up the IPIs properly, enabling IRQ_PER_CPU, and so forth. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/Makefile | 6 +++--- arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 29 +++++++++-------------------- 2 files changed, 12 insertions(+), 23 deletions(-) (limited to 'arch/sh/kernel/cpu') diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 96ea09ca8cc1..ebdd391d5f42 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o # SMP setup -smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o +smp-$(CONFIG_CPU_SHX3) := smp-shx3.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o @@ -38,6 +38,6 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7724) := pinmux-sh7724.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o -obj-y += $(clock-y) -obj-$(CONFIG_SMP) += $(smp-y) +obj-y += $(clock-y) +obj-$(CONFIG_SMP) += $(smp-y) obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 93e0d2c017e8..b70049470a0b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -595,9 +595,8 @@ enum { HSPI, GPIO0, GPIO1, Thermal, - INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7, - - /* interrupt groups */ + INTICI0, INTICI1, INTICI2, INTICI3, + INTICI4, INTICI5, INTICI6, INTICI7, }; static struct intc_vect vectors[] __initdata = { @@ -638,10 +637,12 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(HSPI, 0xe80), INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0), INTC_VECT(Thermal, 0xee0), + INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20), + INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60), + INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0), + INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0), }; -/* FIXME: Main CPU support only now */ -#if 1 /* Main CPU */ #define CnINTMSK0 0xfe410030 #define CnINTMSK1 0xfe410040 #define CnINTMSKCLR0 0xfe410050 @@ -654,21 +655,6 @@ static struct intc_vect vectors[] __initdata = { #define CnINT2MSKCR1 0xfe410a34 #define CnINT2MSKCR2 0xfe410a38 #define CnINT2MSKCR3 0xfe410a3c -#else /* Sub CPU */ -#define CnINTMSK0 0xfe410034 -#define CnINTMSK1 0xfe410044 -#define CnINTMSKCLR0 0xfe410054 -#define CnINTMSKCLR1 0xfe410064 -#define CnINT2MSKR0 0xfe410b20 -#define CnINT2MSKR1 0xfe410b24 -#define CnINT2MSKR2 0xfe410b28 -#define CnINT2MSKR3 0xfe410b2c -#define CnINT2MSKCR0 0xfe410b30 -#define CnINT2MSKCR1 0xfe410b34 -#define CnINT2MSKCR2 0xfe410b38 -#define CnINT2MSKCR3 0xfe410b3c -#endif - #define INTMSK2 0xfe410068 #define INTMSKCLR2 0xfe41006c @@ -753,6 +739,9 @@ static struct intc_prio_reg prio_registers[] __initdata = { GPIO1, Thermal } }, { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } }, { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } }, + { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */ + { INTICI7, INTICI6, INTICI5, INTICI4, + INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) }, }; static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL, -- cgit v1.2.2