From 36aa7965d85270065f090b01db5c62bf75e65f30 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 10 Jul 2008 16:21:35 -0400 Subject: powerpc/mpc7448: add alias list to DTS, clean out old chosen node The mpc7448hpc2 board doesn't have an alias block like most of the other modern eval boards have. We need this block in order to have u-boot be able to make use of the CONFIG_OF_STDOUT_VIA_ALIAS (vs. having a hard coded node) in the future. Also remove the old, redundant chosen node. Of all the modern Freescale eval boards (incl. 83xx, 85xx, 86xx) this is the only one which still has it. Its presence also breaks with some older versions of u-boot, like 1.3.1 -- which try and insert a second chosen node. Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc7448hpc2.dts | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 705c23c14f32..2544f3ecd6e9 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -18,6 +18,16 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + + serial0 = &serial0; + serial1 = &serial1; + + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells =<0>; @@ -78,7 +88,7 @@ }; - ethernet@6200 { + enet0: ethernet@6200 { linux,network-index = <0>; #size-cells = <0>; device_type = "network"; @@ -91,7 +101,7 @@ phy-handle = <&phy8>; }; - ethernet@6600 { + enet1: ethernet@6600 { linux,network-index = <1>; #address-cells = <1>; #size-cells = <0>; @@ -105,7 +115,7 @@ phy-handle = <&phy9>; }; - serial@7808 { + serial0: serial@7808 { device_type = "serial"; compatible = "ns16550"; reg = <0x7808 0x200>; @@ -114,7 +124,7 @@ interrupt-parent = <&mpic>; }; - serial@7c08 { + serial1: serial@7c08 { device_type = "serial"; compatible = "ns16550"; reg = <0x7c08 0x200>; @@ -131,7 +141,7 @@ compatible = "chrp,open-pic"; device_type = "open-pic"; }; - pci@1000 { + pci0: pci@1000 { compatible = "tsi108-pci"; device_type = "pci"; #interrupt-cells = <1>; @@ -184,8 +194,4 @@ }; }; }; - chosen { - linux,stdout-path = "/tsi108@c0000000/serial@7808"; - }; - }; -- cgit v1.2.2