From 89d93347d1f66832c43e6b25a669fddff89929b5 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 20 Apr 2009 11:26:48 -0500 Subject: powerpc: make dma_window_* in pci_controller struct avail on 32b Also, convert them to resource_size_t (which is unsigned long on 64-bit, so it's not a change there). We will be using these on fsl 32b to indicate the start and size address of memory that the pci controller can actually reach - this is needed to determine if an address requires bounce buffering. For now, initialize them to a standard value; in the near future, the value will be calculated based on how the inbound windows are programmed. Signed-off-by: Becky Bruce Acked-by: Ben Herrenschmidt Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/pci-bridge.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 84007afabdb5..9861258f6a4c 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -140,10 +140,12 @@ struct pci_controller { struct resource io_resource; struct resource mem_resources[3]; int global_number; /* PCI domain number */ + + resource_size_t dma_window_base_cur; + resource_size_t dma_window_size; + #ifdef CONFIG_PPC64 unsigned long buid; - unsigned long dma_window_base_cur; - unsigned long dma_window_size; void *private_data; #endif /* CONFIG_PPC64 */ -- cgit v1.2.2 From ca851c783ccf9784fb6ffebcb25e2b6fd0b8dccc Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 22 Apr 2009 13:44:24 -0500 Subject: powerpc/cpm: Remove some cruft code and defines Kill of some old defines and macros that we no longer use like CPM_MAP_ADDR and CPM_IRQ_OFFSET. Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/cpm2.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h index 0f5e8ff59a85..990ff191da8b 100644 --- a/arch/powerpc/include/asm/cpm2.h +++ b/arch/powerpc/include/asm/cpm2.h @@ -14,10 +14,6 @@ #include #include -#ifdef CONFIG_PPC_85xx -#define CPM_MAP_ADDR (get_immrbase() + 0x80000) -#endif - /* CPM Command register. */ #define CPM_CR_RST ((uint)0x80000000) -- cgit v1.2.2 From 1e76dff22ce45bc8b869a9956b24a77877915364 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 22 Apr 2009 12:32:09 -0500 Subject: powerpc/86xx: clean up smp init code Removed the need for asm/mpc86xx.h as it was only used in mpc86xx_smp.c and just moved the defines it cared about into there. Also fixed up the ioremap to only map the one 4k page we need access to and to iounmap when we are done. Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/mpc86xx.h | 33 --------------------------------- 1 file changed, 33 deletions(-) delete mode 100644 arch/powerpc/include/asm/mpc86xx.h (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h deleted file mode 100644 index 15f650f987e7..000000000000 --- a/arch/powerpc/include/asm/mpc86xx.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * MPC86xx definitions - * - * Author: Jeff Brown - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_MPC86xx_H__ -#define __ASM_POWERPC_MPC86xx_H__ - -#include - -#ifdef CONFIG_PPC_86xx - -#define CPU0_BOOT_RELEASE 0x01000000 -#define CPU1_BOOT_RELEASE 0x02000000 -#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE) -#define MCM_PORT_CONFIG_OFFSET 0x1010 - -/* Offset from CCSRBAR */ -#define MPC86xx_MCM_OFFSET (0x00000) -#define MPC86xx_MCM_SIZE (0x02000) - -#endif /* CONFIG_PPC_86xx */ -#endif /* __ASM_POWERPC_MPC86xx_H__ */ -#endif /* __KERNEL__ */ -- cgit v1.2.2 From 06c4435021f4856261edd01e2691071edeb8fa51 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Fri, 1 May 2009 15:40:47 -0400 Subject: powerpc/qe: update risc allocation for QE Change the RISC allocation to macros instead of enum, add function to read the number of risc engines from the new property "fsl,qe-num-riscs" under the qe node in dts. Add new property "fsl,qe-num-riscs" description in qe.txt Signed-off-by: Haiying Wang Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/qe.h | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 2701753d9937..60314ef58d11 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -152,6 +152,8 @@ unsigned int qe_get_brg_clk(void); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); +unsigned int qe_get_num_of_risc(void); + /* we actually use cpm_muram implementation, define this for convenience */ #define qe_muram_init cpm_muram_init #define qe_muram_alloc cpm_muram_alloc @@ -231,12 +233,16 @@ struct qe_bd { #define QE_ALIGNMENT_OF_PRAM 64 /* RISC allocation */ -enum qe_risc_allocation { - QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ - QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ - QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose - RISC 1 or RISC 2 */ -}; +#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */ +#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */ +#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */ +#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */ +#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2) +#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2 | \ + QE_RISC_ALLOCATION_RISC3 | \ + QE_RISC_ALLOCATION_RISC4) /* QE extended filtering Table Lookup Key Size */ enum qe_fltr_tbl_lookup_key_size { -- cgit v1.2.2 From 98ca77af23da6682bb3e34961a3f32e2c064a4ce Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Fri, 1 May 2009 15:40:48 -0400 Subject: powerpc/qe: update QE Serial Number The latest QE chip may have more Serial Number(SNUM)s of thread to use. We will get the number of SNUMs from device tree by reading the new property "fsl,qe-num-snums", and set 28 as the default number of SNUMs so that it is compatible with the old QE chips' device trees which don't have this new property. The macro QE_NUM_OF_SNUM is defined as the maximum number in QE snum table which is 256. Also we update the snum_init[] array with 18 more new SNUMs which are confirmed to be useful on new chip. Signed-off-by: Haiying Wang Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/qe.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 60314ef58d11..e0faf332c9c9 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -22,7 +22,7 @@ #include #include -#define QE_NUM_OF_SNUM 28 +#define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */ #define QE_NUM_OF_BRGS 16 #define QE_NUM_OF_PORTS 1024 @@ -153,6 +153,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); unsigned int qe_get_num_of_risc(void); +unsigned int qe_get_num_of_snums(void); /* we actually use cpm_muram implementation, define this for convenience */ #define qe_muram_init cpm_muram_init -- cgit v1.2.2 From 14f966e79445015cd89d0fa0ceb6b33702e951b6 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Wed, 15 Apr 2009 05:55:32 +0000 Subject: powerpc/pseries: CMO unused page hinting Adds support for the "unused" page hint which can be used in shared memory partitions to flag pages not in use, which will then be stolen before active pages by the hypervisor when memory needs to be moved to LPARs in need of additional memory. Failure to mark pages as 'unused' makes the LPAR slower to give up unused memory to other partitions. This adds the kernel parameter 'cmo_free_hint' to disable this functionality. Signed-off-by: Brian King Signed-off-by: Robert Jennings Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/page.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 32cbf16f10ea..4940662ee87e 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -231,6 +231,11 @@ extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *p); extern int page_is_ram(unsigned long pfn); +#ifdef CONFIG_PPC_SMLPAR +void arch_free_page(struct page *page, int order); +#define HAVE_ARCH_FREE_PAGE +#endif + struct vm_area_struct; typedef struct page *pgtable_t; -- cgit v1.2.2 From 9b647a30cbc228259555d6b0b6bc7d9ec798f907 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 22 Apr 2009 15:31:38 +0000 Subject: powerpc/irq: Move get_irq() comment into header The guts of do_IRQ() isn't really the right place to be documenting the ppc_md.get_irq() interface. So move the comment into machdep.h Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/machdep.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 0efdb1dfdc5f..11d1fc3a8962 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -110,6 +110,10 @@ struct machdep_calls { void (*show_percpuinfo)(struct seq_file *m, int i); void (*init_IRQ)(void); + + /* Return an irq, or NO_IRQ to indicate there are none pending. + * If for some reason there is no irq, but the interrupt + * shouldn't be counted as spurious, return NO_IRQ_IGNORE. */ unsigned int (*get_irq)(void); #ifdef CONFIG_KEXEC void (*kexec_cpu_down)(int crash_shutdown, int secondary); -- cgit v1.2.2 From d89ebca2248ab03a5928e7dd30b6c304283fc207 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 28 Apr 2009 03:32:36 +0000 Subject: powerpc: Fix up elf_read_implies_exec() usage We believe if a toolchain supports PT_GNU_STACK that it sets the proper PHDR permissions. Therefor elf_read_implies_exec() should only be true if we don't see PT_GNU_STACK set. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/elf.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index d6b4a12cdeff..014a624f4c8e 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -256,11 +256,11 @@ do { \ * even if we have an executable stack. */ # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ - (exec_stk != EXSTACK_DISABLE_X) : 0) + (exec_stk == EXSTACK_DEFAULT) : 0) #else # define SET_PERSONALITY(ex) \ set_personality(PER_LINUX | (current->personality & (~PER_MASK))) -# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X) +# define elf_read_implies_exec(ex, exec_stk) (exec_stk == EXSTACK_DEFAULT) #endif /* __powerpc64__ */ extern int dcache_bsize; -- cgit v1.2.2 From da6b43c833f885d8604aee7f9711bb457a40d863 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 Apr 2009 20:58:01 +0000 Subject: powerpc: Cleanup macros in ppc-opcode.h Make macros more braces happy. Signed-off-by: Michael Neuling Acked-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ppc-opcode.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 640ccbbc0977..1c819501de22 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -47,10 +47,10 @@ #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ -#define __PPC_RA(a) ((a & 0x1f) << 16) -#define __PPC_RB(b) ((b & 0x1f) << 11) -#define __PPC_T_TLB(t) ((t & 0x3) << 21) -#define __PPC_WC(w) ((w & 0x3) << 21) +#define __PPC_RA(a) (((a) & 0x1f) << 16) +#define __PPC_RB(b) (((b) & 0x1f) << 11) +#define __PPC_T_TLB(t) (((t) & 0x3) << 21) +#define __PPC_WC(w) (((w) & 0x3) << 21) /* Deal with instructions that older assemblers aren't aware of */ #define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \ -- cgit v1.2.2 From dfb432cb960bfcbdf668d0a228bc909897156b31 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 Apr 2009 20:58:01 +0000 Subject: powerpc: Move VSX load/stores into ppc-opcode.h Cleans up the VSX load/store instructions by moving them into ppc-opcode.h. Signed-off-by: Michael Neuling Acked-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ppc-opcode.h | 13 +++++++++++++ arch/powerpc/include/asm/ppc_asm.h | 10 ---------- 2 files changed, 13 insertions(+), 10 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 1c819501de22..39bcc9f9ff62 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -25,6 +25,7 @@ #define PPC_INST_LSWI 0x7c0004aa #define PPC_INST_LSWX 0x7c00042a #define PPC_INST_LWSYNC 0x7c2004ac +#define PPC_INST_LXVD2X 0x7c000698 #define PPC_INST_MCRXR 0x7c000400 #define PPC_INST_MCRXR_MASK 0xfc0007fe #define PPC_INST_MFSPR_PVR 0x7c1f42a6 @@ -43,12 +44,14 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a +#define PPC_INST_STXVD2X 0x7c000798 #define PPC_INST_TLBILX 0x7c000024 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ #define __PPC_RA(a) (((a) & 0x1f) << 16) #define __PPC_RB(b) (((b) & 0x1f) << 11) +#define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5)) #define __PPC_T_TLB(t) (((t) & 0x3) << 21) #define __PPC_WC(w) (((w) & 0x3) << 21) @@ -70,4 +73,14 @@ #define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ __PPC_WC(w)) +/* + * Define what the VSX XX1 form instructions will look like, then add + * the 128 bit load store instructions based on that. + */ +#define VSX_XX1(s, a, b) (__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b)) +#define STXVD2X(s, a, b) stringify_in_c(.long PPC_INST_STXVD2X | \ + VSX_XX1((s), (a), (b))) +#define LXVD2X(s, a, b) stringify_in_c(.long PPC_INST_LXVD2X | \ + VSX_XX1((s), (a), (b))) + #endif /* _ASM_POWERPC_PPC_OPCODE_H */ diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 384d90c9c272..f9729529c20d 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -76,16 +76,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ REST_10GPRS(22, base) #endif -/* - * Define what the VSX XX1 form instructions will look like, then add - * the 128 bit load store instructions based on that. - */ -#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \ - ((rb) << 11) | (((xs) >> 5))) - -#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb))) -#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb))) - #define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) #define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) #define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) -- cgit v1.2.2 From af20aeb1a3292ae7ecfc492a4dc059e35465e016 Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Wed, 29 Apr 2009 20:58:01 +0000 Subject: powerpc: Enable MMU feature sections for inline asm powerpc: Enable MMU feature sections for inline asm This adds the ability to do MMU feature sections for inline asm. Signed-off-by: Milton Miller Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/feature-fixups.h | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h index e4094a5cb05b..cbd4dfa4bce2 100644 --- a/arch/powerpc/include/asm/feature-fixups.h +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -8,8 +8,6 @@ * 2 of the License, or (at your option) any later version. */ -#ifdef __ASSEMBLY__ - /* * Feature section common macros * @@ -23,10 +21,12 @@ /* 64 bits kernel, 32 bits code (ie. vdso32) */ #define FTR_ENTRY_LONG .llong #define FTR_ENTRY_OFFSET .long 0xffffffff; .long +#elif defined(CONFIG_PPC64) +#define FTR_ENTRY_LONG .llong +#define FTR_ENTRY_OFFSET .llong #else -/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */ -#define FTR_ENTRY_LONG PPC_LONG -#define FTR_ENTRY_OFFSET PPC_LONG +#define FTR_ENTRY_LONG .long +#define FTR_ENTRY_OFFSET .long #endif #define START_FTR_SECTION(label) label##1: @@ -141,6 +141,21 @@ label##5: \ #define ALT_FW_FTR_SECTION_END_IFCLR(msk) \ ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97) +#ifndef __ASSEMBLY__ + +#define ASM_MMU_FTR_IF(section_if, section_else, msk, val) \ + stringify_in_c(BEGIN_MMU_FTR_SECTION) \ + section_if "; " \ + stringify_in_c(MMU_FTR_SECTION_ELSE) \ + section_else "; " \ + stringify_in_c(ALT_MMU_FTR_SECTION_END((msk), (val))) + +#define ASM_MMU_FTR_IFSET(section_if, section_else, msk) \ + ASM_MMU_FTR_IF(section_if, section_else, (msk), (msk)) + +#define ASM_MMU_FTR_IFCLR(section_if, section_else, msk) \ + ASM_MMU_FTR_IF(section_if, section_else, (msk), 0) + #endif /* __ASSEMBLY__ */ /* LWSYNC feature sections */ -- cgit v1.2.2 From 60dbf4385130136847ea73657da329f8e7dbe16e Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Wed, 29 Apr 2009 20:58:01 +0000 Subject: powerpc: Add 2.06 tlbie mnemonics This adds the PowerPC 2.06 tlbie mnemonics and keeps backwards compatibilty for CPUs before 2.06. Only useful for bare metal systems. Signed-off-by: Milton Miller Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu.h | 5 +++++ arch/powerpc/include/asm/ppc-opcode.h | 4 ++++ 2 files changed, 9 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index cbf154387091..325b7208a146 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -52,6 +52,11 @@ */ #define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000) +/* This indicates that the processor uses the ISA 2.06 server tlbie + * mnemonics + */ +#define MMU_FTR_TLBIE_206 ASM_CONST(0x00400000) + #ifndef __ASSEMBLY__ #include diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 39bcc9f9ff62..b74f16d45cb4 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -45,12 +45,14 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a #define PPC_INST_STXVD2X 0x7c000798 +#define PPC_INST_TLBIE 0x7c000264 #define PPC_INST_TLBILX 0x7c000024 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ #define __PPC_RA(a) (((a) & 0x1f) << 16) #define __PPC_RB(b) (((b) & 0x1f) << 11) +#define __PPC_RS(s) (((s) & 0x1f) << 21) #define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5)) #define __PPC_T_TLB(t) (((t) & 0x3) << 21) #define __PPC_WC(w) (((w) & 0x3) << 21) @@ -72,6 +74,8 @@ #define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) #define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ __PPC_WC(w)) +#define PPC_TLBIE(lp,a) stringify_in_c(.long PPC_INST_TLBIE | \ + __PPC_RB(a) | __PPC_RS(lp)) /* * Define what the VSX XX1 form instructions will look like, then add -- cgit v1.2.2 From 2eb4afb69ff3cdd357d5e68ed82cd131916bd8a7 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 30 Apr 2009 09:26:21 +0000 Subject: powerpc/pci: Move pseries code into pseries platform specific area There doesn't appear to be any specific reason that we need to setup the pseries specific notifier in generic arch pci code. Move it into pseries land. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pci-bridge.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 9861258f6a4c..0dbf66bdb01d 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -223,6 +223,7 @@ struct pci_dn { #define PCI_DN(dn) ((struct pci_dn *) (dn)->data) extern struct device_node *fetch_dev_dn(struct pci_dev *dev); +extern void * update_dn_pci_info(struct device_node *dn, void *data); /* Get a device_node from a pci_dev. This code must be fast except * in the case where the sysdata is incorrect and needs to be fixed -- cgit v1.2.2 From cf6692c07ab4cba8a28780b67706ac804319086b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 5 May 2009 02:20:08 +0000 Subject: powerpc/pci: Cleanup some minor cruft * Removed building setup-irq on ppc32, we don't use it anymore * Remove duplicate prototype for setup_grackle() code that needs it gets it from * Removed gratuitous pci_io_size type differences between ppc32/ppc64 Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pci-bridge.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 0dbf66bdb01d..4c61fa0b8d75 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -86,17 +86,12 @@ struct pci_controller { void *io_base_alloc; #endif resource_size_t io_base_phys; -#ifndef CONFIG_PPC64 resource_size_t pci_io_size; -#endif /* Some machines (PReP) have a non 1:1 mapping of * the PCI memory space in the CPU bus space */ resource_size_t pci_mem_offset; -#ifdef CONFIG_PPC64 - unsigned long pci_io_size; -#endif /* Some machines have a special region to forward the ISA * "memory" cycles such as VGA memory regions. Left to 0 @@ -187,7 +182,6 @@ extern int early_find_capability(struct pci_controller *hose, int bus, extern void setup_indirect_pci(struct pci_controller* hose, resource_size_t cfg_addr, resource_size_t cfg_data, u32 flags); -extern void setup_grackle(struct pci_controller *hose); #else /* CONFIG_PPC64 */ /* -- cgit v1.2.2 From 2138422bbab91c3e924c9836e394f4925b456b79 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Thu, 14 May 2009 12:42:27 +0000 Subject: powerpc: Use sg->dma_length in sg_dma_len() macro on 32-bit Currently, the 32-bit code uses sg->length instead of sg->dma_lentgh to report sg_dma_len. However, since the default dma code for 32-bit (the dma_direct case) sets dma_length and length to the same thing, we should be able to use dma_length there as well. This gets rid of some 32-vs-64-bit ifdefs, and is needed by the swiotlb code which actually distinguishes between dma_length and length. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/scatterlist.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h index fcf7d55afe45..912bf597870f 100644 --- a/arch/powerpc/include/asm/scatterlist.h +++ b/arch/powerpc/include/asm/scatterlist.h @@ -21,7 +21,7 @@ struct scatterlist { unsigned int offset; unsigned int length; - /* For TCE support */ + /* For TCE or SWIOTLB support */ dma_addr_t dma_address; u32 dma_length; }; @@ -34,11 +34,7 @@ struct scatterlist { * is 0. */ #define sg_dma_address(sg) ((sg)->dma_address) -#ifdef __powerpc64__ #define sg_dma_len(sg) ((sg)->dma_length) -#else -#define sg_dma_len(sg) ((sg)->length) -#endif #ifdef __powerpc64__ #define ISA_DMA_THRESHOLD (~0UL) -- cgit v1.2.2 From 80947e7c99c29ce3a78bdc1933b310468455a82f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 18 May 2009 02:10:05 +0000 Subject: powerpc: Keep track of emulated instructions If CONFIG_PPC_EMULATED_STATS is enabled, make available counters for the various classes of emulated instructions under /sys/kernel/debug/powerpc/emulated_instructions/ (assumed debugfs is mounted on /sys/kernel/debug). Optionally (controlled by /sys/kernel/debug/powerpc/emulated_instructions/do_warn), rate-limited warnings can be printed to the console when instructions are emulated. Signed-off-by: Geert Uytterhoeven Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/emulated_ops.h | 73 +++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 arch/powerpc/include/asm/emulated_ops.h (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h new file mode 100644 index 000000000000..9154e8526732 --- /dev/null +++ b/arch/powerpc/include/asm/emulated_ops.h @@ -0,0 +1,73 @@ +/* + * Copyright 2007 Sony Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + * If not, see . + */ + +#ifndef _ASM_POWERPC_EMULATED_OPS_H +#define _ASM_POWERPC_EMULATED_OPS_H + +#include + + +#ifdef CONFIG_PPC_EMULATED_STATS + +struct ppc_emulated_entry { + const char *name; + atomic_t val; +}; + +extern struct ppc_emulated { +#ifdef CONFIG_ALTIVEC + struct ppc_emulated_entry altivec; +#endif + struct ppc_emulated_entry dcba; + struct ppc_emulated_entry dcbz; + struct ppc_emulated_entry fp_pair; + struct ppc_emulated_entry isel; + struct ppc_emulated_entry mcrxr; + struct ppc_emulated_entry mfpvr; + struct ppc_emulated_entry multiple; + struct ppc_emulated_entry popcntb; + struct ppc_emulated_entry spe; + struct ppc_emulated_entry string; + struct ppc_emulated_entry unaligned; +#ifdef CONFIG_MATH_EMULATION + struct ppc_emulated_entry math; +#elif defined(CONFIG_8XX_MINIMAL_FPEMU) + struct ppc_emulated_entry 8xx; +#endif +#ifdef CONFIG_VSX + struct ppc_emulated_entry vsx; +#endif +} ppc_emulated; + +extern u32 ppc_warn_emulated; + +extern void ppc_warn_emulated_print(const char *type); + +#define PPC_WARN_EMULATED(type) \ + do { \ + atomic_inc(&ppc_emulated.type.val); \ + if (ppc_warn_emulated) \ + ppc_warn_emulated_print(ppc_emulated.type.name); \ + } while (0) + +#else /* !CONFIG_PPC_EMULATED_STATS */ + +#define PPC_WARN_EMULATED(type) do { } while (0) + +#endif /* !CONFIG_PPC_EMULATED_STATS */ + +#endif /* _ASM_POWERPC_EMULATED_OPS_H */ -- cgit v1.2.2 From 047584ce94108012288554a5f84585d792cc7f8f Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Tue, 2 Jun 2009 04:04:15 +0000 Subject: net/ucc_geth: Add SGMII support for UEC GETH driver Signed-off-by: Haiying Wang Signed-off-by: David S. Miller --- arch/powerpc/include/asm/qe.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 2701753d9937..4459d20dc76a 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -668,6 +668,8 @@ struct ucc_slow_pram { #define UCC_GETH_UPSMR_RMM 0x00001000 #define UCC_GETH_UPSMR_CAM 0x00000400 #define UCC_GETH_UPSMR_BRO 0x00000200 +#define UCC_GETH_UPSMR_SMM 0x00000080 +#define UCC_GETH_UPSMR_SGMM 0x00000020 /* UCC Transmit On Demand Register (UTODR) */ #define UCC_SLOW_TOD 0x8000 -- cgit v1.2.2 From 64f16502475ddf663169369fffff6da9b10ea9fb Mon Sep 17 00:00:00 2001 From: Roderick Colenbrander Date: Sat, 6 Jun 2009 10:14:22 -0600 Subject: powerpc/virtex: Add support for Xilinx PCI host bridge This patch adds support for the Xilinx plbv46-pci-1.03.a PCI host bridge IPcore. Signed-off-by: Roderick Colenbrander Signed-off-by: Grant Likely --- arch/powerpc/include/asm/xilinx_pci.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 arch/powerpc/include/asm/xilinx_pci.h (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/xilinx_pci.h b/arch/powerpc/include/asm/xilinx_pci.h new file mode 100644 index 000000000000..7a8275caf6af --- /dev/null +++ b/arch/powerpc/include/asm/xilinx_pci.h @@ -0,0 +1,21 @@ +/* + * Xilinx pci external definitions + * + * Copyright 2009 Roderick Colenbrander + * Copyright 2009 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef INCLUDE_XILINX_PCI +#define INCLUDE_XILINX_PCI + +#ifdef CONFIG_XILINX_PCI +extern void __init xilinx_pci_init(void); +#else +static inline void __init xilinx_pci_init(void) { return; } +#endif + +#endif /* INCLUDE_XILINX_PCI */ -- cgit v1.2.2 From ec097c84dff17511f2693e6ef6c3064dfbf0a3af Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 28 May 2009 21:26:38 +0000 Subject: powerpc: Add PTRACE_SINGLEBLOCK support Reworked by: Benjamin Herrenschmidt This adds block-step support on powerpc, including a PTRACE_SINGLEBLOCK request for ptrace. The BookE implementation is tweaked to fire a single step after a block step in order to mimmic the server behaviour. Signed-off-by: Roland McGrath Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ptrace.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index c9c678fb2538..8c341490cfc5 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -135,7 +135,9 @@ do { \ * These are defined as per linux/ptrace.h, which see. */ #define arch_has_single_step() (1) +#define arch_has_block_step() (!cpu_has_feature(CPU_FTR_601)) extern void user_enable_single_step(struct task_struct *); +extern void user_enable_block_step(struct task_struct *); extern void user_disable_single_step(struct task_struct *); #endif /* __ASSEMBLY__ */ @@ -288,4 +290,6 @@ extern void user_disable_single_step(struct task_struct *); #define PPC_PTRACE_PEEKUSR_3264 0x91 #define PPC_PTRACE_POKEUSR_3264 0x90 +#define PTRACE_SINGLEBLOCK 0x100 /* resume execution until next branch */ + #endif /* _ASM_POWERPC_PTRACE_H */ -- cgit v1.2.2 From d3f6204a7d65030ba92bf43a278b3f3054353e0b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 2 Jun 2009 21:16:38 +0000 Subject: powerpc: Set init_bootmem_done on NUMA platforms as well For some obscure reason, we only set init_bootmem_done after initializing bootmem when NUMA isn't enabled. We even document this next to the declaration of that global in system.h which of course I didn't read before I had to debug why some WIP code wasn't working properly... This patch changes it so that we always set it after bootmem is initialized which should have always been the case... go figure ! Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/system.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h index 2b2420a49884..bb8e006a47c6 100644 --- a/arch/powerpc/include/asm/system.h +++ b/arch/powerpc/include/asm/system.h @@ -211,7 +211,7 @@ extern struct task_struct *_switch(struct thread_struct *prev, extern unsigned int rtas_data; extern int mem_init_done; /* set on boot once kmalloc can be called */ -extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ +extern int init_bootmem_done; /* set once bootmem is available */ extern phys_addr_t memory_limit; extern unsigned long klimit; -- cgit v1.2.2 From 91c60b5b8209627590b31c07262e40c27d27d272 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 2 Jun 2009 21:17:41 +0000 Subject: powerpc: Separate PACA fields for server CPUs This patch has no effect other than re-ordering PACA fields on current server CPUs. It however is a pre-requisite for future support of BookE 64-bit processors. Various parts of the PACA struct are now moved under some ifdef's, either the new CONFIG_PPC_BOOK3S or CONFIG_PPC_STD_MMU_64, whatever seems more appropriate. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/paca.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 082b3aedf145..0ea1985bdb8b 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -43,6 +43,7 @@ struct task_struct; * processor. */ struct paca_struct { +#ifdef CONFIG_PPC_BOOK3S /* * Because hw_cpu_id, unlike other paca fields, is accessed * routinely from other CPUs (from the IRQ code), we stick to @@ -51,7 +52,7 @@ struct paca_struct { */ struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ - +#endif /* CONFIG_PPC_BOOK3S */ /* * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c * load lock_token and paca_index with a single lwz @@ -64,13 +65,16 @@ struct paca_struct { u64 kernel_toc; /* Kernel TOC address */ u64 kernelbase; /* Base address of kernel */ u64 kernel_msr; /* MSR while running in kernel */ +#ifdef CONFIG_PPC_STD_MMU_64 u64 stab_real; /* Absolute address of segment table */ u64 stab_addr; /* Virtual address of segment table */ +#endif /* CONFIG_PPC_STD_MMU_64 */ void *emergency_sp; /* pointer to emergency stack */ u64 data_offset; /* per cpu data offset */ s16 hw_cpu_id; /* Physical processor number */ u8 cpu_start; /* At startup, processor spins until */ /* this becomes non-zero. */ +#ifdef CONFIG_PPC_STD_MMU_64 struct slb_shadow *slb_shadow_ptr; /* @@ -81,11 +85,13 @@ struct paca_struct { u64 exmc[10]; /* used for machine checks */ u64 exslb[10]; /* used for SLB/segment table misses * on the linear mapping */ - - mm_context_t context; + /* SLB related definitions */ u16 vmalloc_sllp; u16 slb_cache_ptr; u16 slb_cache[SLB_CACHE_ENTRIES]; +#endif /* CONFIG_PPC_STD_MMU_64 */ + + mm_context_t context; /* * then miscellaneous read-write fields -- cgit v1.2.2 From 944916858a430a0627e483657d4cfa2cd2dfb4f7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 2 Jun 2009 21:17:45 +0000 Subject: powerpc: Shield code specific to 64-bit server processors This is a random collection of added ifdef's around portions of code that only mak sense on server processors. Using either CONFIG_PPC_STD_MMU_64 or CONFIG_PPC_BOOK3S as seems appropriate. This is meant to make the future merging of Book3E 64-bit support easier. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/lppaca.h | 6 ++++++ arch/powerpc/include/asm/mmu.h | 4 ++-- arch/powerpc/include/asm/pgtable-ppc64.h | 5 +++++ 3 files changed, 13 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index d2a65e8ca6ae..f78f65c38f05 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -20,6 +20,11 @@ #define _ASM_POWERPC_LPPACA_H #ifdef __KERNEL__ +/* These definitions relate to hypervisors that only exist when using + * a server type processor + */ +#ifdef CONFIG_PPC_BOOK3S + //============================================================================= // // This control block contains the data that is shared between the @@ -158,5 +163,6 @@ struct slb_shadow { extern struct slb_shadow slb_shadow[]; +#endif /* CONFIG_PPC_BOOK3S */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_LPPACA_H */ diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 325b7208a146..fb57ded592f9 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -74,10 +74,10 @@ extern void early_init_mmu_secondary(void); #endif /* !__ASSEMBLY__ */ -#ifdef CONFIG_PPC64 +#if defined(CONFIG_PPC_STD_MMU_64) /* 64-bit classic hash table MMU */ # include -#elif defined(CONFIG_PPC_STD_MMU) +#elif defined(CONFIG_PPC_STD_MMU_32) /* 32-bit classic hash table MMU */ # include #elif defined(CONFIG_40x) diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index c40db05f21e0..8cd083c61503 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -31,9 +31,11 @@ #error TASK_SIZE_USER64 exceeds pagetable range #endif +#ifdef CONFIG_PPC_STD_MMU_64 #if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT)) #error TASK_SIZE_USER64 exceeds user VSID range #endif +#endif /* * Define the address range of the vmalloc VM area. @@ -199,8 +201,11 @@ static inline unsigned long pte_update(struct mm_struct *mm, if (!huge) assert_pte_locked(mm, addr); +#ifdef CONFIG_PPC_STD_MMU_64 if (old & _PAGE_HASHPTE) hpte_need_flush(mm, addr, ptep, old, huge); +#endif + return old; } -- cgit v1.2.2 From ec3cf2ece22a8ede7478bf38e2a818986322662b Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Thu, 14 May 2009 12:42:28 +0000 Subject: powerpc: Add support for swiotlb on 32-bit This patch includes the basic infrastructure to use swiotlb bounce buffering on 32-bit powerpc. It is not yet enabled on any platforms. Probably the most interesting bit is the addition of addr_needs_map to dma_ops - we need this as a dma_op because the decision of whether or not an addr can be mapped by a device is device-specific. Signed-off-by: Becky Bruce Acked-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/dma-mapping.h | 11 +++++++++++ arch/powerpc/include/asm/swiotlb.h | 27 +++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100644 arch/powerpc/include/asm/swiotlb.h (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index cb448d68452c..3d9e887c3c0c 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -15,9 +15,18 @@ #include #include #include +#include #define DMA_ERROR_CODE (~(dma_addr_t)0x0) +/* Some dma direct funcs must be visible for use in other dma_ops */ +extern void *dma_direct_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); +extern void dma_direct_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +extern unsigned long get_dma_direct_offset(struct device *dev); + #ifdef CONFIG_NOT_COHERENT_CACHE /* * DMA-consistent mapping functions for PowerPCs that don't support @@ -78,6 +87,8 @@ struct dma_mapping_ops { dma_addr_t dma_address, size_t size, enum dma_data_direction direction, struct dma_attrs *attrs); + int (*addr_needs_map)(struct device *dev, dma_addr_t addr, + size_t size); #ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS void (*sync_single_range_for_cpu)(struct device *hwdev, dma_addr_t dma_handle, unsigned long offset, diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h new file mode 100644 index 000000000000..30891d6e2bc1 --- /dev/null +++ b/arch/powerpc/include/asm/swiotlb.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __ASM_SWIOTLB_H +#define __ASM_SWIOTLB_H + +#include + +extern struct dma_mapping_ops swiotlb_dma_ops; +extern struct dma_mapping_ops swiotlb_pci_dma_ops; + +int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t, + size_t size); + +static inline void dma_mark_clean(void *addr, size_t size) {} + +extern unsigned int ppc_swiotlb_enable; +int __init swiotlb_setup_bus_notifier(void); + +#endif /* __ASM_SWIOTLB_H */ -- cgit v1.2.2 From 5c6fc8db768fb9990ee67ab052896fd46fbe2651 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jun 2009 04:38:45 +0000 Subject: powerpc/cell: Extract duplicated IOPTE_* to Both arch/powerpc/platforms/cell/iommu.c and arch/powerpc/platforms/ps3/mm.c contain the same Cell IOMMU page table entry definitions. Extract them and move them to , while adding a CBE_ prefix. This also allows them to be used by drivers. Signed-off-by: Geert Uytterhoeven Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/iommu.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index 7464c0daddd1..7ead7c16fb7c 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -35,6 +35,16 @@ #define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) +/* Cell page table entries */ +#define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */ +#define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */ +#define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */ +#define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */ +#define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */ +#define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */ +#define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */ +#define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */ + /* Boot time flags */ extern int iommu_is_off; extern int iommu_force_on; -- cgit v1.2.2 From d3352c9f1e8e2f2989d9686c8aa8acb4842fe75e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jun 2009 04:38:48 +0000 Subject: ps3fb/vram: Extract common GPU stuff into Signed-off-by: Geert Uytterhoeven Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Jim Paris Cc: Jens Axboe Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ps3.h | 3 -- arch/powerpc/include/asm/ps3gpu.h | 78 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 78 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/include/asm/ps3gpu.h (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h index cdb6fd814de8..b9e4987986dd 100644 --- a/arch/powerpc/include/asm/ps3.h +++ b/arch/powerpc/include/asm/ps3.h @@ -520,7 +520,4 @@ void ps3_sync_irq(int node); u32 ps3_get_hw_thread_id(int cpu); u64 ps3_get_spe_id(void *arg); -/* mutex synchronizing GPU accesses and video mode changes */ -extern struct mutex ps3_gpu_mutex; - #endif diff --git a/arch/powerpc/include/asm/ps3gpu.h b/arch/powerpc/include/asm/ps3gpu.h new file mode 100644 index 000000000000..1037efae4a51 --- /dev/null +++ b/arch/powerpc/include/asm/ps3gpu.h @@ -0,0 +1,78 @@ +/* + * PS3 GPU declarations. + * + * Copyright 2009 Sony Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + * If not, see . + */ + +#ifndef _ASM_POWERPC_PS3GPU_H +#define _ASM_POWERPC_PS3GPU_H + +#include + +#include + + +#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC 0x101 +#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP 0x102 + +#define L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP 0x600 +#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601 +#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT_SYNC 0x602 + +#define L1GPU_FB_BLIT_WAIT_FOR_COMPLETION (1ULL << 32) + +#define L1GPU_DISPLAY_SYNC_HSYNC 1 +#define L1GPU_DISPLAY_SYNC_VSYNC 2 + + +/* mutex synchronizing GPU accesses and video mode changes */ +extern struct mutex ps3_gpu_mutex; + + +static inline int lv1_gpu_display_sync(u64 context_handle, u64 head, + u64 ddr_offset) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC, + head, ddr_offset, 0, 0); +} + +static inline int lv1_gpu_display_flip(u64 context_handle, u64 head, + u64 ddr_offset) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP, + head, ddr_offset, 0, 0); +} + +static inline int lv1_gpu_fb_setup(u64 context_handle, u64 xdr_lpar, + u64 xdr_size, u64 ioif_offset) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP, + xdr_lpar, xdr_size, ioif_offset, 0); +} + +static inline int lv1_gpu_fb_blit(u64 context_handle, u64 ddr_offset, + u64 ioif_offset, u64 sync_width, u64 pitch) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, + ddr_offset, ioif_offset, sync_width, + pitch); +} + +#endif /* _ASM_POWERPC_PS3GPU_H */ -- cgit v1.2.2 From c204ff65590837e6a9c50ca549497b4682682ec6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jun 2009 04:38:49 +0000 Subject: ps3fb: Tear down FB setup during cleanup During cleanup, use L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE to tear down the setup done by L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP. This allows unloading and reloading of ps3fb while the sound driver keeps the GPU open. Signed-off-by: Geert Uytterhoeven Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ps3gpu.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/ps3gpu.h b/arch/powerpc/include/asm/ps3gpu.h index 1037efae4a51..b2b89591907c 100644 --- a/arch/powerpc/include/asm/ps3gpu.h +++ b/arch/powerpc/include/asm/ps3gpu.h @@ -31,6 +31,7 @@ #define L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP 0x600 #define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601 #define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT_SYNC 0x602 +#define L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE 0x603 #define L1GPU_FB_BLIT_WAIT_FOR_COMPLETION (1ULL << 32) @@ -75,4 +76,11 @@ static inline int lv1_gpu_fb_blit(u64 context_handle, u64 ddr_offset, pitch); } +static inline int lv1_gpu_fb_close(u64 context_handle) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE, 0, + 0, 0, 0); +} + #endif /* _ASM_POWERPC_PS3GPU_H */ -- cgit v1.2.2 From 3240776ce290a3be4ca77bacf8b1e8d36b4a691d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 10 Jun 2009 22:22:08 +0000 Subject: powerpc: Wire up sys_rt_tgsigqueueinfo Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/systbl.h | 1 + arch/powerpc/include/asm/unistd.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index a0b92de51c7e..370600ca2765 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -325,3 +325,4 @@ SYSCALL(inotify_init1) SYSCALL_SPU(perf_counter_open) COMPAT_SYS_SPU(preadv) COMPAT_SYS_SPU(pwritev) +COMPAT_SYS(rt_tgsigqueueinfo) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 4badac2d11d1..cef080bfc607 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -344,10 +344,11 @@ #define __NR_perf_counter_open 319 #define __NR_preadv 320 #define __NR_pwritev 321 +#define __NR_rt_tgsigqueueinfo 322 #ifdef __KERNEL__ -#define __NR_syscalls 322 +#define __NR_syscalls 323 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls -- cgit v1.2.2 From 4c75f84f2c781beb230031234ed961d28771a764 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 12 Jun 2009 02:00:50 +0000 Subject: powerpc: Add compiler memory barrier to mtmsr macro On 32-bit non-Book E, local_irq_restore() turns into just mtmsr(), which doesn't currently have a compiler memory barrier. This means that accesses to memory inside a local_irq_save/restore section, or a spin_lock_irqsave/spin_unlock_irqrestore section on UP, can be reordered by the compiler to occur outside that section. To fix this, this adds a compiler memory barrier to mtmsr for both 32-bit and 64-bit. Having a compiler memory barrier in mtmsr makes sense because it will almost always be changing something about the context in which memory accesses are done, so in general we don't want memory accesses getting moved from one side of an mtmsr to the other. With the barrier in mtmsr(), some of the explicit barriers in hw_irq.h are now redundant, so this removes them. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hw_irq.h | 5 ++--- arch/powerpc/include/asm/reg.h | 4 ++-- 2 files changed, 4 insertions(+), 5 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 53512374e1c9..b7f8f4a87cc0 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -80,7 +80,7 @@ static inline void local_irq_disable(void) __asm__ __volatile__("wrteei 0": : :"memory"); #else unsigned long msr; - __asm__ __volatile__("": : :"memory"); + msr = mfmsr(); SET_MSR_EE(msr & ~MSR_EE); #endif @@ -92,7 +92,7 @@ static inline void local_irq_enable(void) __asm__ __volatile__("wrteei 1": : :"memory"); #else unsigned long msr; - __asm__ __volatile__("": : :"memory"); + msr = mfmsr(); SET_MSR_EE(msr | MSR_EE); #endif @@ -108,7 +108,6 @@ static inline void local_irq_save_ptr(unsigned long *flags) #else SET_MSR_EE(msr & ~MSR_EE); #endif - __asm__ __volatile__("": : :"memory"); } #define local_save_flags(flags) ((flags) = mfmsr()) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index fb359b0a6937..a3c28e46947c 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -745,11 +745,11 @@ asm volatile("mfmsr %0" : "=r" (rval)); rval;}) #ifdef CONFIG_PPC64 #define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \ - : : "r" (v)) + : : "r" (v) : "memory") #define mtmsrd(v) __mtmsrd((v), 0) #define mtmsr(v) mtmsrd(v) #else -#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v)) +#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v) : "memory") #endif #define mfspr(rn) ({unsigned long rval; \ -- cgit v1.2.2 From c2e95c6d7a9b9d8f023c3639edbb1da65ccd15ac Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 12 Jun 2009 21:10:41 +0000 Subject: powerpc: Use generic atomic64_t implementation on 32-bit processors This makes 32-bit powerpc use the generic atomic64_t implementation. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/atomic.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h index b7d2d07b6f96..4012483b1899 100644 --- a/arch/powerpc/include/asm/atomic.h +++ b/arch/powerpc/include/asm/atomic.h @@ -470,6 +470,9 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) +#else /* __powerpc64__ */ +#include + #endif /* __powerpc64__ */ #include -- cgit v1.2.2 From 9f08e9db84c1e9234e07b9b595f5b2508c621823 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jun 2009 04:38:53 +0000 Subject: ps3: Use dev_[gs]et_drvdata() instead of direct access for system bus devices Signed-off-by: Geert Uytterhoeven Cc: Geoff Levand Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ps3.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h index b9e4987986dd..dcd302f489f6 100644 --- a/arch/powerpc/include/asm/ps3.h +++ b/arch/powerpc/include/asm/ps3.h @@ -421,12 +421,12 @@ static inline struct ps3_system_bus_driver * static inline void ps3_system_bus_set_driver_data( struct ps3_system_bus_device *dev, void *data) { - dev->core.driver_data = data; + dev_set_drvdata(&dev->core, data); } static inline void *ps3_system_bus_get_driver_data( struct ps3_system_bus_device *dev) { - return dev->core.driver_data; + return dev_get_drvdata(&dev->core); } /* These two need global scope for get_dma_ops(). */ -- cgit v1.2.2 From 03fa68c245cccbcb99035cbabaa13b408ba91ab5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jun 2009 04:38:54 +0000 Subject: ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdata Signed-off-by: Geert Uytterhoeven Cc: Geoff Levand Cc: Jim Paris Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ps3.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h index dcd302f489f6..7660694ab3ca 100644 --- a/arch/powerpc/include/asm/ps3.h +++ b/arch/powerpc/include/asm/ps3.h @@ -418,12 +418,12 @@ static inline struct ps3_system_bus_driver * * @data: Data to set */ -static inline void ps3_system_bus_set_driver_data( +static inline void ps3_system_bus_set_drvdata( struct ps3_system_bus_device *dev, void *data) { dev_set_drvdata(&dev->core, data); } -static inline void *ps3_system_bus_get_driver_data( +static inline void *ps3_system_bus_get_drvdata( struct ps3_system_bus_device *dev) { return dev_get_drvdata(&dev->core); -- cgit v1.2.2 From a4e623fbc9b201930abcf78df6db5e49aa8e00cb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jun 2009 04:39:06 +0000 Subject: ps3: Replace direct file operations by callback Currently the FLASH database is updated by the kernel using file operations, meant for userspace only. While this works for us because copy_{from,to}_user() on powerpc can handle kernel pointers, this is unportable and a bad example. Replace the file operations by callbacks, registered by the ps3flash driver. Signed-off-by: Geert Uytterhoeven Cc: Geoff Levand Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ps3.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h index 7660694ab3ca..7f065e178ec4 100644 --- a/arch/powerpc/include/asm/ps3.h +++ b/arch/powerpc/include/asm/ps3.h @@ -53,6 +53,13 @@ enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void); extern u64 ps3_os_area_get_rtc_diff(void); extern void ps3_os_area_set_rtc_diff(u64 rtc_diff); +struct ps3_os_area_flash_ops { + ssize_t (*read)(void *buf, size_t count, loff_t pos); + ssize_t (*write)(const void *buf, size_t count, loff_t pos); +}; + +extern void ps3_os_area_flash_register(const struct ps3_os_area_flash_ops *ops); + /* dma routines */ enum ps3_dma_page_size { -- cgit v1.2.2 From 08604bd9935dc98fb62ef61d5b7baa7ccc10f8c2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 16 Jun 2009 15:31:12 -0700 Subject: time: move PIT_TICK_RATE to linux/timex.h PIT_TICK_RATE is currently defined in four architectures, but in three different places. While linux/timex.h is not the perfect place for it, it is still a reasonable replacement for those drivers that traditionally use asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency. Note that for Alpha, the actual value changed from 1193182UL to 1193180UL. This is unlikely to make a difference, and probably can only improve accuracy. There was a discussion on the correct value of CLOCK_TICK_RATE a few years ago, after which every existing instance was getting changed to 1193182. According to the specification, it should be 1193181.818181... Signed-off-by: Arnd Bergmann Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Len Brown Cc: john stultz Cc: Dmitry Torokhov Cc: Takashi Iwai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/include/asm/8253pit.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch/powerpc/include') diff --git a/arch/powerpc/include/asm/8253pit.h b/arch/powerpc/include/asm/8253pit.h index b70d6e53b303..a71c9c1455a7 100644 --- a/arch/powerpc/include/asm/8253pit.h +++ b/arch/powerpc/include/asm/8253pit.h @@ -1,10 +1,3 @@ -#ifndef _ASM_POWERPC_8253PIT_H -#define _ASM_POWERPC_8253PIT_H - /* * 8253/8254 Programmable Interval Timer */ - -#define PIT_TICK_RATE 1193182UL - -#endif /* _ASM_POWERPC_8253PIT_H */ -- cgit v1.2.2