From 7d4c8e56109e0799ab9fb644c08a8daf4a026675 Mon Sep 17 00:00:00 2001 From: Daniel Yeisley Date: Mon, 20 Feb 2006 18:27:54 -0800 Subject: [PATCH] i386: need to pass virtual address to smp_read_mpc() I'm seeing a kernel panic on an ES7000-600 when booting in virtual wire mode. The panic happens because smp_read_mpc() is passed a physical address, and it should be virtual. I tested the attached patch on the ES7000-600 and on a 2 cpu Dell box, and saw no problems on either. Signed-off-by: Dan Yeisley Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/mpparse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/i386') diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 0102f3d50e57..e7609abf3796 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -710,7 +710,7 @@ void __init get_smp_config (void) * Read the physical hardware table. Anything here will * override the defaults. */ - if (!smp_read_mpc((void *)mpf->mpf_physptr)) { + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { smp_found_config = 0; printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); -- cgit v1.2.2 From 124d90be62343f71bbb7a6b4a907b5584181e6d5 Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Fri, 24 Feb 2006 13:04:08 -0800 Subject: [PATCH] Kprobes causes NX protection fault on i686 SMP Fix a problem seen on i686 machine with NX support where the instruction could not be single stepped because of NX bit set on the memory pages allocated by kprobes module. This patch provides allocation of instruction solt so that the processor can execute the instruction from that location similar to x86_64 architecture. Thanks to Bibo and Masami for testing this patch. Signed-off-by: Prasanna S Panchamukhi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch/i386') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 6483eeb1a4e8..694a13997637 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -58,6 +58,11 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode) int __kprobes arch_prepare_kprobe(struct kprobe *p) { + /* insn: must be on special executable page on i386. */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) + return -ENOMEM; + memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; return 0; @@ -77,6 +82,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + down(&kprobe_mutex); + free_insn_slot(p->ainsn.insn); + up(&kprobe_mutex); +} + static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); @@ -111,7 +123,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) if (p->opcode == BREAKPOINT_INSTRUCTION) regs->eip = (unsigned long)p->addr; else - regs->eip = (unsigned long)&p->ainsn.insn; + regs->eip = (unsigned long)p->ainsn.insn; } /* Called with kretprobe_lock held */ @@ -351,7 +363,7 @@ static void __kprobes resume_execution(struct kprobe *p, { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; - unsigned long copy_eip = (unsigned long)&p->ainsn.insn; + unsigned long copy_eip = (unsigned long)p->ainsn.insn; unsigned long orig_eip = (unsigned long)p->addr; switch (p->ainsn.insn[0]) { -- cgit v1.2.2 From 8d5c822b2920be9016806f61fd552d2301cfa2fc Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 24 Feb 2006 13:04:10 -0800 Subject: [PATCH] voyager: fix boot panic by adding topology export It looks like I can't get away without exporting topology functions from voyager any longer, so add them to the voyager subarchitecture. Signed-off-by: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mach-voyager/voyager_basic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/i386') diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c index aa49a33a572c..6761d294f260 100644 --- a/arch/i386/mach-voyager/voyager_basic.c +++ b/arch/i386/mach-voyager/voyager_basic.c @@ -23,6 +23,9 @@ #include #include #include +#include +#include +#include #include #include #include @@ -329,3 +332,15 @@ void machine_power_off(void) pm_power_off(); } +static struct i386_cpu cpu_devices[NR_CPUS]; + +static int __init topology_init(void) +{ + int i; + + for_each_present_cpu(i) + register_cpu(&cpu_devices[i].cpu, i, NULL); + return 0; +} + +subsys_initcall(topology_init); -- cgit v1.2.2 From f68a106f224c21148c5264a429fac149dc7ad0ac Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 24 Feb 2006 13:04:11 -0800 Subject: [PATCH] voyager: fix the cpu_possible_map to make voyager boot again Right at the moment (thanks to a patch from Andrew), cpu_possible_map on voyager is CPU_MASK_NONE, which means the machine always thinks it has no CPUs. Fix that by doing an early initialisation of the cpu_possible_map from the cpu_phys_present_map. (akpm: we aim to please) Signed-off-by: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mach-voyager/voyager_smp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/i386') diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 6e4c3baef6cc..8165626a5c30 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -402,6 +402,7 @@ find_smp_config(void) cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8; cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16; cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24; + cpu_possible_map = phys_cpu_present_map; printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]); /* Here we set up the VIC to enable SMP */ /* enable the CPIs by writing the base vector to their register */ -- cgit v1.2.2 From 2b932f6cf052920fb3a6281499e08209b08f5086 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 24 Feb 2006 13:04:14 -0800 Subject: [PATCH] x86: fix broken SMP boot sequence Recent GDT changes broke the SMP boot sequence if the booting CPU is numbered anything other than zero. There's also a subtle source of error in that the boot time CPU now uses cpu_gdt_table (which is actually the GDT for booting CPUs in head.S). This patch fixes both problems by making GDT descriptors themselves allocated from a per_cpu area and switching to them in cpu_init(), which now means that cpu_gdt_table is exclusively used for booting CPUs again. Signed-off-by: James Bottomley Cc: Zachary Amsden Cc: Matt Tolentino Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/common.c | 32 ++++++++++++++++++++++++++++---- arch/i386/kernel/efi.c | 12 +++++++----- arch/i386/kernel/head.S | 2 -- arch/i386/kernel/i386_ksyms.c | 2 -- arch/i386/kernel/smpboot.c | 6 ------ 5 files changed, 35 insertions(+), 19 deletions(-) (limited to 'arch/i386') diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 7eb9213734a3..4ecd4b326ded 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -18,6 +19,9 @@ #include "cpu.h" +DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr); +EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr); + DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]); EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack); @@ -571,8 +575,9 @@ void __devinit cpu_init(void) int cpu = smp_processor_id(); struct tss_struct * t = &per_cpu(init_tss, cpu); struct thread_struct *thread = ¤t->thread; - struct desc_struct *gdt = get_cpu_gdt_table(cpu); + struct desc_struct *gdt; __u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu); + struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu); if (cpu_test_and_set(cpu, cpu_initialized)) { printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); @@ -589,6 +594,25 @@ void __devinit cpu_init(void) set_in_cr4(X86_CR4_TSD); } + /* + * This is a horrible hack to allocate the GDT. The problem + * is that cpu_init() is called really early for the boot CPU + * (and hence needs bootmem) but much later for the secondary + * CPUs, when bootmem will have gone away + */ + if (NODE_DATA(0)->bdata->node_bootmem_map) { + gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE); + /* alloc_bootmem_pages panics on failure, so no check */ + memset(gdt, 0, PAGE_SIZE); + } else { + gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL); + if (unlikely(!gdt)) { + printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu); + for (;;) + local_irq_enable(); + } + } + /* * Initialize the per-CPU GDT with the boot GDT, * and set up the GDT descriptor: @@ -601,10 +625,10 @@ void __devinit cpu_init(void) ((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) | (CPU_16BIT_STACK_SIZE - 1); - cpu_gdt_descr[cpu].size = GDT_SIZE - 1; - cpu_gdt_descr[cpu].address = (unsigned long)gdt; + cpu_gdt_descr->size = GDT_SIZE - 1; + cpu_gdt_descr->address = (unsigned long)gdt; - load_gdt(&cpu_gdt_descr[cpu]); + load_gdt(cpu_gdt_descr); load_idt(&idt_descr); /* diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index ecad519fd395..e3e42fd62401 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -103,17 +103,19 @@ static void efi_call_phys_prelog(void) */ local_flush_tlb(); - cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address); - load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0])); + per_cpu(cpu_gdt_descr, 0).address = + __pa(per_cpu(cpu_gdt_descr, 0).address); + load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0))); } static void efi_call_phys_epilog(void) { unsigned long cr4; - cpu_gdt_descr[0].address = - (unsigned long) __va(cpu_gdt_descr[0].address); - load_gdt(&cpu_gdt_descr[0]); + per_cpu(cpu_gdt_descr, 0).address = + (unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address); + load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0))); + cr4 = read_cr4(); if (cr4 & X86_CR4_PSE) { diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 2bee6499edd9..e0b7c632efbc 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -534,5 +534,3 @@ ENTRY(cpu_gdt_table) .quad 0x0000000000000000 /* 0xf0 - unused */ .quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */ - /* Be sure this is zeroed to avoid false validations in Xen */ - .fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0 diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/i386/kernel/i386_ksyms.c index 3999bec50c33..055325056a74 100644 --- a/arch/i386/kernel/i386_ksyms.c +++ b/arch/i386/kernel/i386_ksyms.c @@ -3,8 +3,6 @@ #include #include -EXPORT_SYMBOL_GPL(cpu_gdt_descr); - EXPORT_SYMBOL(__down_failed); EXPORT_SYMBOL(__down_failed_interruptible); EXPORT_SYMBOL(__down_failed_trylock); diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index fb00ab7b7612..eba7f53f8b4a 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -898,12 +898,6 @@ static int __devinit do_boot_cpu(int apicid, int cpu) unsigned long start_eip; unsigned short nmi_high = 0, nmi_low = 0; - if (!cpu_gdt_descr[cpu].address && - !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) { - printk("Failed to allocate GDT for CPU %d\n", cpu); - return 1; - } - ++cpucount; /* -- cgit v1.2.2 From 9c869edac591977314323a4eaad5f7633fca684f Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Fri, 24 Feb 2006 13:04:27 -0800 Subject: [PATCH] Fix topology.c location When compiling a non-default subarch, topology.c is missing from the kernel build. This causes builds with CONFIG_HOTPLUG_CPU to fail. In addition, on Intel processors with cpuid level > 4, it causes intel_cacheinfo.c to reference uninitialized data that should have been set up by the initcall in topology.c which calls register_cpu. This causes a kernel panic on boot on newer Intel processors. Moving topology.c to arch/i386/kernel fixes both of these problems. Thanks to Dan Hecht for finding and fixing this problem. Signed-off-by: Zachary Amsden Signed-off-by: Dan Hecht Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/Makefile | 2 +- arch/i386/kernel/topology.c | 97 +++++++++++++++++++++++++++++++++++++++ arch/i386/mach-default/Makefile | 2 +- arch/i386/mach-default/topology.c | 97 --------------------------------------- 4 files changed, 99 insertions(+), 99 deletions(-) create mode 100644 arch/i386/kernel/topology.c delete mode 100644 arch/i386/mach-default/topology.c (limited to 'arch/i386') diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 60c3f76dfca4..53bb9a79e274 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \ - quirks.o i8237.o + quirks.o i8237.o topology.o obj-y += cpu/ obj-y += timers/ diff --git a/arch/i386/kernel/topology.c b/arch/i386/kernel/topology.c new file mode 100644 index 000000000000..67a0e1baa28b --- /dev/null +++ b/arch/i386/kernel/topology.c @@ -0,0 +1,97 @@ +/* + * arch/i386/kernel/topology.c - Populate driverfs with topology information + * + * Written by: Matthew Dobson, IBM Corporation + * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to + */ +#include +#include +#include +#include + +static struct i386_cpu cpu_devices[NR_CPUS]; + +int arch_register_cpu(int num){ + struct node *parent = NULL; + +#ifdef CONFIG_NUMA + int node = cpu_to_node(num); + if (node_online(node)) + parent = &node_devices[node].node; +#endif /* CONFIG_NUMA */ + + return register_cpu(&cpu_devices[num].cpu, num, parent); +} + +#ifdef CONFIG_HOTPLUG_CPU + +void arch_unregister_cpu(int num) { + struct node *parent = NULL; + +#ifdef CONFIG_NUMA + int node = cpu_to_node(num); + if (node_online(node)) + parent = &node_devices[node].node; +#endif /* CONFIG_NUMA */ + + return unregister_cpu(&cpu_devices[num].cpu, parent); +} +EXPORT_SYMBOL(arch_register_cpu); +EXPORT_SYMBOL(arch_unregister_cpu); +#endif /*CONFIG_HOTPLUG_CPU*/ + + + +#ifdef CONFIG_NUMA +#include +#include + +struct i386_node node_devices[MAX_NUMNODES]; + +static int __init topology_init(void) +{ + int i; + + for_each_online_node(i) + arch_register_node(i); + + for_each_present_cpu(i) + arch_register_cpu(i); + return 0; +} + +#else /* !CONFIG_NUMA */ + +static int __init topology_init(void) +{ + int i; + + for_each_present_cpu(i) + arch_register_cpu(i); + return 0; +} + +#endif /* CONFIG_NUMA */ + +subsys_initcall(topology_init); diff --git a/arch/i386/mach-default/Makefile b/arch/i386/mach-default/Makefile index e95bb0237921..012fe34459e6 100644 --- a/arch/i386/mach-default/Makefile +++ b/arch/i386/mach-default/Makefile @@ -2,4 +2,4 @@ # Makefile for the linux kernel. # -obj-y := setup.o topology.o +obj-y := setup.o diff --git a/arch/i386/mach-default/topology.c b/arch/i386/mach-default/topology.c deleted file mode 100644 index b64314069e78..000000000000 --- a/arch/i386/mach-default/topology.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * arch/i386/mach-generic/topology.c - Populate driverfs with topology information - * - * Written by: Matthew Dobson, IBM Corporation - * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL - * - * Copyright (C) 2002, IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to - */ -#include -#include -#include -#include - -static struct i386_cpu cpu_devices[NR_CPUS]; - -int arch_register_cpu(int num){ - struct node *parent = NULL; - -#ifdef CONFIG_NUMA - int node = cpu_to_node(num); - if (node_online(node)) - parent = &node_devices[node].node; -#endif /* CONFIG_NUMA */ - - return register_cpu(&cpu_devices[num].cpu, num, parent); -} - -#ifdef CONFIG_HOTPLUG_CPU - -void arch_unregister_cpu(int num) { - struct node *parent = NULL; - -#ifdef CONFIG_NUMA - int node = cpu_to_node(num); - if (node_online(node)) - parent = &node_devices[node].node; -#endif /* CONFIG_NUMA */ - - return unregister_cpu(&cpu_devices[num].cpu, parent); -} -EXPORT_SYMBOL(arch_register_cpu); -EXPORT_SYMBOL(arch_unregister_cpu); -#endif /*CONFIG_HOTPLUG_CPU*/ - - - -#ifdef CONFIG_NUMA -#include -#include - -struct i386_node node_devices[MAX_NUMNODES]; - -static int __init topology_init(void) -{ - int i; - - for_each_online_node(i) - arch_register_node(i); - - for_each_present_cpu(i) - arch_register_cpu(i); - return 0; -} - -#else /* !CONFIG_NUMA */ - -static int __init topology_init(void) -{ - int i; - - for_each_present_cpu(i) - arch_register_cpu(i); - return 0; -} - -#endif /* CONFIG_NUMA */ - -subsys_initcall(topology_init); -- cgit v1.2.2 From 13a229abc25640813f1480c0478dfc6bdbc1c19e Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sun, 26 Feb 2006 04:18:31 +0100 Subject: [PATCH] x86_64: Only do the clustered systems have unsynchronized TSC assumption on IBM systems Big Unisys systems have multiple clusters too, but they have an synchronized TSC. I'm using the SMBIOS to check for vendor == IBM. Cc: Chris McDermott Cc: "Protasevich, Natalie" Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/kernel/acpi/boot.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/i386') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 79577f0ace98..8309a7b2cd63 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -44,9 +44,6 @@ extern void __init clustered_apic_check(void); extern int gsi_irq_sharing(int gsi); #include -static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } - - #else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC -- cgit v1.2.2 From 6070f9ec6b03cc46cd0242523326f7a296f47c1c Mon Sep 17 00:00:00 2001 From: Andreas Deresch Date: Sun, 26 Feb 2006 04:18:34 +0100 Subject: [PATCH] i386: Handle non existing APICs without panicing [description from AK] This fixes booting in APIC mode on some ACER laptops. x86-64 did a similar change some time ago. See http://bugzilla.kernel.org/show_bug.cgi?id=4700 for details Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/kernel/io_apic.c | 6 ++++-- arch/i386/kernel/mpparse.c | 10 ++++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) (limited to 'arch/i386') diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index f2dd218d88cb..235822b3f41b 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2566,8 +2566,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) spin_unlock_irqrestore(&ioapic_lock, flags); /* Sanity check */ - if (reg_00.bits.ID != apic_id) - panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic); + if (reg_00.bits.ID != apic_id) { + printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); + return -1; + } } apic_printk(APIC_VERBOSE, KERN_INFO diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index e7609abf3796..e6e2f43db85e 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -915,6 +915,7 @@ void __init mp_register_ioapic ( u32 gsi_base) { int idx = 0; + int tmpid; if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " @@ -935,9 +936,14 @@ void __init mp_register_ioapic ( set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15)) - mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id); + tmpid = io_apic_get_unique_id(idx, id); else - mp_ioapics[idx].mpc_apicid = id; + tmpid = id; + if (tmpid == -1) { + nr_ioapics--; + return; + } + mp_ioapics[idx].mpc_apicid = tmpid; mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); /* -- cgit v1.2.2 From e18f9b4be430189d79a01a75734bf7cfdc22cc3f Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 26 Feb 2006 17:07:45 -0600 Subject: [PATCH] fix voyager after topology.c move Commit 9c869edac591977314323a4eaad5f7633fca684f broke voyager again rather subtly because it already had its own topology exporting functions, so now each CPU gets registered twice. I think we can actually use the generic ones, so I don't propose reverting it. The attached should eliminate the voyager topology functions in favour of the generic ones. I also added a define to ensure voyager is never hotplug CPU (we don't have the support in the SMP harness). Signed-off-by: James Bottomley Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 2 +- arch/i386/mach-voyager/voyager_basic.c | 14 -------------- 2 files changed, 1 insertion(+), 15 deletions(-) (limited to 'arch/i386') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 0afec8566e7b..af411596a318 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -733,7 +733,7 @@ config PHYSICAL_START config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER ---help--- Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c index 6761d294f260..b584060ec004 100644 --- a/arch/i386/mach-voyager/voyager_basic.c +++ b/arch/i386/mach-voyager/voyager_basic.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include @@ -331,16 +330,3 @@ void machine_power_off(void) if (pm_power_off) pm_power_off(); } - -static struct i386_cpu cpu_devices[NR_CPUS]; - -static int __init topology_init(void) -{ - int i; - - for_each_present_cpu(i) - register_cpu(&cpu_devices[i].cpu, i, NULL); - return 0; -} - -subsys_initcall(topology_init); -- cgit v1.2.2 From add2b6fdae9d7fc251c229e76252f731917094c4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 26 Feb 2006 20:24:40 -0800 Subject: Make Kprobes depend on modules Commit 9ec4b1f356b3bad928ae8e2aa9caebfa737d52df made kprobes not compile without module support, so just make that clear in the Kconfig file. Also, since it's marked EXPERIMENTAL, make that dependency explicit too. Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/i386') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index af411596a318..5b1a7d46d1d9 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1060,6 +1060,7 @@ source "arch/i386/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes -- cgit v1.2.2