From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@ppc970.osdl.org>
Date: Sat, 16 Apr 2005 15:20:36 -0700
Subject: Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
---
 arch/i386/kernel/setup.c | 1535 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1535 insertions(+)
 create mode 100644 arch/i386/kernel/setup.c

(limited to 'arch/i386/kernel/setup.c')

diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
new file mode 100644
index 000000000000..945ec73163c8
--- /dev/null
+++ b/arch/i386/kernel/setup.c
@@ -0,0 +1,1535 @@
+/*
+ *  linux/arch/i386/kernel/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ *
+ *  Memory region support
+ *	David Parsons <orc@pell.chi.il.us>, July-August 1999
+ *
+ *  Added E820 sanitization routine (removes overlapping memory regions);
+ *  Brian Moyle <bmoyle@mvista.com>, February 2001
+ *
+ * Moved CPU detection code to cpu/${cpu}.c
+ *    Patrick Mochel <mochel@osdl.org>, March 2002
+ *
+ *  Provisions for empty E820 memory regions (reported by certain BIOSes).
+ *  Alex Achenbach <xela@slit.de>, December 2002.
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/apm_bios.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/mca.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/edd.h>
+#include <linux/nodemask.h>
+#include <video/edid.h>
+#include <asm/e820.h>
+#include <asm/mpspec.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/sections.h>
+#include <asm/io_apic.h>
+#include <asm/ist.h>
+#include <asm/io.h>
+#include "setup_arch_pre.h"
+#include <bios_ebda.h>
+
+/* This value is set up by the early boot code to point to the value
+   immediately after the boot time page tables.  It contains a *physical*
+   address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_end __initdata = ~0UL;
+
+int disable_pse __initdata = 0;
+
+/*
+ * Machine setup..
+ */
+
+#ifdef CONFIG_EFI
+int efi_enabled = 0;
+EXPORT_SYMBOL(efi_enabled);
+#endif
+
+/* cpu data as detected by the assembly code in head.S */
+struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+/* common cpu data for all cpus */
+struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+
+unsigned long mmu_cr4_features;
+
+#ifdef	CONFIG_ACPI_INTERPRETER
+	int acpi_disabled = 0;
+#else
+	int acpi_disabled = 1;
+#endif
+EXPORT_SYMBOL(acpi_disabled);
+
+#ifdef	CONFIG_ACPI_BOOT
+int __initdata acpi_force = 0;
+extern acpi_interrupt_flags	acpi_sci_flags;
+#endif
+
+/* for MCA, but anyone else can use it if they want */
+unsigned int machine_id;
+unsigned int machine_submodel_id;
+unsigned int BIOS_revision;
+unsigned int mca_pentium_flag;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0x10000000;
+
+/* Boot loader ID as an integer, for the benefit of proc_dointvec */
+int bootloader_type;
+
+/* user-defined highmem size */
+static unsigned int highmem_pages = -1;
+
+/*
+ * Setup options
+ */
+struct drive_info_struct { char dummy[32]; } drive_info;
+struct screen_info screen_info;
+struct apm_info apm_info;
+struct sys_desc_table_struct {
+	unsigned short length;
+	unsigned char table[0];
+};
+struct edid_info edid_info;
+struct ist_info ist_info;
+struct e820map e820;
+
+extern void early_cpu_init(void);
+extern void dmi_scan_machine(void);
+extern void generic_apic_probe(char *);
+extern int root_mountflags;
+
+unsigned long saved_videomode;
+
+#define RAMDISK_IMAGE_START_MASK  	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000	
+
+static char command_line[COMMAND_LINE_SIZE];
+
+unsigned char __initdata boot_params[PARAM_SIZE];
+
+static struct resource data_resource = {
+	.name	= "Kernel data",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+	.name	= "Kernel code",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource system_rom_resource = {
+	.name	= "System ROM",
+	.start	= 0xf0000,
+	.end	= 0xfffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource extension_rom_resource = {
+	.name	= "Extension ROM",
+	.start	= 0xe0000,
+	.end	= 0xeffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource adapter_rom_resources[] = { {
+	.name 	= "Adapter ROM",
+	.start	= 0xc8000,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+} };
+
+#define ADAPTER_ROM_RESOURCES \
+	(sizeof adapter_rom_resources / sizeof adapter_rom_resources[0])
+
+static struct resource video_rom_resource = {
+	.name 	= "Video ROM",
+	.start	= 0xc0000,
+	.end	= 0xc7fff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource video_ram_resource = {
+	.name	= "Video RAM area",
+	.start	= 0xa0000,
+	.end	= 0xbffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource standard_io_resources[] = { {
+	.name	= "dma1",
+	.start	= 0x0000,
+	.end	= 0x001f,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "pic1",
+	.start	= 0x0020,
+	.end	= 0x0021,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name   = "timer0",
+	.start	= 0x0040,
+	.end    = 0x0043,
+	.flags  = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name   = "timer1",
+	.start  = 0x0050,
+	.end    = 0x0053,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "keyboard",
+	.start	= 0x0060,
+	.end	= 0x006f,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "dma page reg",
+	.start	= 0x0080,
+	.end	= 0x008f,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "pic2",
+	.start	= 0x00a0,
+	.end	= 0x00a1,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "dma2",
+	.start	= 0x00c0,
+	.end	= 0x00df,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "fpu",
+	.start	= 0x00f0,
+	.end	= 0x00ff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+} };
+
+#define STANDARD_IO_RESOURCES \
+	(sizeof standard_io_resources / sizeof standard_io_resources[0])
+
+#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
+
+static int __init romchecksum(unsigned char *rom, unsigned long length)
+{
+	unsigned char *p, sum = 0;
+
+	for (p = rom; p < rom + length; p++)
+		sum += *p;
+	return sum == 0;
+}
+
+static void __init probe_roms(void)
+{
+	unsigned long start, length, upper;
+	unsigned char *rom;
+	int	      i;
+
+	/* video rom */
+	upper = adapter_rom_resources[0].start;
+	for (start = video_rom_resource.start; start < upper; start += 2048) {
+		rom = isa_bus_to_virt(start);
+		if (!romsignature(rom))
+			continue;
+
+		video_rom_resource.start = start;
+
+		/* 0 < length <= 0x7f * 512, historically */
+		length = rom[2] * 512;
+
+		/* if checksum okay, trust length byte */
+		if (length && romchecksum(rom, length))
+			video_rom_resource.end = start + length - 1;
+
+		request_resource(&iomem_resource, &video_rom_resource);
+		break;
+	}
+
+	start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
+	if (start < upper)
+		start = upper;
+
+	/* system rom */
+	request_resource(&iomem_resource, &system_rom_resource);
+	upper = system_rom_resource.start;
+
+	/* check for extension rom (ignore length byte!) */
+	rom = isa_bus_to_virt(extension_rom_resource.start);
+	if (romsignature(rom)) {
+		length = extension_rom_resource.end - extension_rom_resource.start + 1;
+		if (romchecksum(rom, length)) {
+			request_resource(&iomem_resource, &extension_rom_resource);
+			upper = extension_rom_resource.start;
+		}
+	}
+
+	/* check for adapter roms on 2k boundaries */
+	for (i = 0; i < ADAPTER_ROM_RESOURCES && start < upper; start += 2048) {
+		rom = isa_bus_to_virt(start);
+		if (!romsignature(rom))
+			continue;
+
+		/* 0 < length <= 0x7f * 512, historically */
+		length = rom[2] * 512;
+
+		/* but accept any length that fits if checksum okay */
+		if (!length || start + length > upper || !romchecksum(rom, length))
+			continue;
+
+		adapter_rom_resources[i].start = start;
+		adapter_rom_resources[i].end = start + length - 1;
+		request_resource(&iomem_resource, &adapter_rom_resources[i]);
+
+		start = adapter_rom_resources[i++].end & ~2047UL;
+	}
+}
+
+static void __init limit_regions(unsigned long long size)
+{
+	unsigned long long current_addr = 0;
+	int i;
+
+	if (efi_enabled) {
+		for (i = 0; i < memmap.nr_map; i++) {
+			current_addr = memmap.map[i].phys_addr +
+				       (memmap.map[i].num_pages << 12);
+			if (memmap.map[i].type == EFI_CONVENTIONAL_MEMORY) {
+				if (current_addr >= size) {
+					memmap.map[i].num_pages -=
+						(((current_addr-size) + PAGE_SIZE-1) >> PAGE_SHIFT);
+					memmap.nr_map = i + 1;
+					return;
+				}
+			}
+		}
+	}
+	for (i = 0; i < e820.nr_map; i++) {
+		if (e820.map[i].type == E820_RAM) {
+			current_addr = e820.map[i].addr + e820.map[i].size;
+			if (current_addr >= size) {
+				e820.map[i].size -= current_addr-size;
+				e820.nr_map = i + 1;
+				return;
+			}
+		}
+	}
+}
+
+static void __init add_memory_region(unsigned long long start,
+                                  unsigned long long size, int type)
+{
+	int x;
+
+	if (!efi_enabled) {
+       		x = e820.nr_map;
+
+		if (x == E820MAX) {
+		    printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+		    return;
+		}
+
+		e820.map[x].addr = start;
+		e820.map[x].size = size;
+		e820.map[x].type = type;
+		e820.nr_map++;
+	}
+} /* add_memory_region */
+
+#define E820_DEBUG	1
+
+static void __init print_memory_map(char *who)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		printk(" %s: %016Lx - %016Lx ", who,
+			e820.map[i].addr,
+			e820.map[i].addr + e820.map[i].size);
+		switch (e820.map[i].type) {
+		case E820_RAM:	printk("(usable)\n");
+				break;
+		case E820_RESERVED:
+				printk("(reserved)\n");
+				break;
+		case E820_ACPI:
+				printk("(ACPI data)\n");
+				break;
+		case E820_NVS:
+				printk("(ACPI NVS)\n");
+				break;
+		default:	printk("type %lu\n", e820.map[i].type);
+				break;
+		}
+	}
+}
+
+/*
+ * Sanitize the BIOS e820 map.
+ *
+ * Some e820 responses include overlapping entries.  The following 
+ * replaces the original e820 map with a new one, removing overlaps.
+ *
+ */
+struct change_member {
+	struct e820entry *pbios; /* pointer to original bios entry */
+	unsigned long long addr; /* address for this change point */
+};
+static struct change_member change_point_list[2*E820MAX] __initdata;
+static struct change_member *change_point[2*E820MAX] __initdata;
+static struct e820entry *overlap_list[E820MAX] __initdata;
+static struct e820entry new_bios[E820MAX] __initdata;
+
+static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
+{
+	struct change_member *change_tmp;
+	unsigned long current_type, last_type;
+	unsigned long long last_addr;
+	int chgidx, still_changing;
+	int overlap_entries;
+	int new_bios_entry;
+	int old_nr, new_nr, chg_nr;
+	int i;
+
+	/*
+		Visually we're performing the following (1,2,3,4 = memory types)...
+
+		Sample memory map (w/overlaps):
+		   ____22__________________
+		   ______________________4_
+		   ____1111________________
+		   _44_____________________
+		   11111111________________
+		   ____________________33__
+		   ___________44___________
+		   __________33333_________
+		   ______________22________
+		   ___________________2222_
+		   _________111111111______
+		   _____________________11_
+		   _________________4______
+
+		Sanitized equivalent (no overlap):
+		   1_______________________
+		   _44_____________________
+		   ___1____________________
+		   ____22__________________
+		   ______11________________
+		   _________1______________
+		   __________3_____________
+		   ___________44___________
+		   _____________33_________
+		   _______________2________
+		   ________________1_______
+		   _________________4______
+		   ___________________2____
+		   ____________________33__
+		   ______________________4_
+	*/
+
+	/* if there's only one memory region, don't bother */
+	if (*pnr_map < 2)
+		return -1;
+
+	old_nr = *pnr_map;
+
+	/* bail out if we find any unreasonable addresses in bios map */
+	for (i=0; i<old_nr; i++)
+		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
+			return -1;
+
+	/* create pointers for initial change-point information (for sorting) */
+	for (i=0; i < 2*old_nr; i++)
+		change_point[i] = &change_point_list[i];
+
+	/* record all known change-points (starting and ending addresses),
+	   omitting those that are for empty memory regions */
+	chgidx = 0;
+	for (i=0; i < old_nr; i++)	{
+		if (biosmap[i].size != 0) {
+			change_point[chgidx]->addr = biosmap[i].addr;
+			change_point[chgidx++]->pbios = &biosmap[i];
+			change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
+			change_point[chgidx++]->pbios = &biosmap[i];
+		}
+	}
+	chg_nr = chgidx;    	/* true number of change-points */
+
+	/* sort change-point list by memory addresses (low -> high) */
+	still_changing = 1;
+	while (still_changing)	{
+		still_changing = 0;
+		for (i=1; i < chg_nr; i++)  {
+			/* if <current_addr> > <last_addr>, swap */
+			/* or, if current=<start_addr> & last=<end_addr>, swap */
+			if ((change_point[i]->addr < change_point[i-1]->addr) ||
+				((change_point[i]->addr == change_point[i-1]->addr) &&
+				 (change_point[i]->addr == change_point[i]->pbios->addr) &&
+				 (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
+			   )
+			{
+				change_tmp = change_point[i];
+				change_point[i] = change_point[i-1];
+				change_point[i-1] = change_tmp;
+				still_changing=1;
+			}
+		}
+	}
+
+	/* create a new bios memory map, removing overlaps */
+	overlap_entries=0;	 /* number of entries in the overlap table */
+	new_bios_entry=0;	 /* index for creating new bios map entries */
+	last_type = 0;		 /* start with undefined memory type */
+	last_addr = 0;		 /* start with 0 as last starting address */
+	/* loop through change-points, determining affect on the new bios map */
+	for (chgidx=0; chgidx < chg_nr; chgidx++)
+	{
+		/* keep track of all overlapping bios entries */
+		if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
+		{
+			/* add map entry to overlap list (> 1 entry implies an overlap) */
+			overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
+		}
+		else
+		{
+			/* remove entry from list (order independent, so swap with last) */
+			for (i=0; i<overlap_entries; i++)
+			{
+				if (overlap_list[i] == change_point[chgidx]->pbios)
+					overlap_list[i] = overlap_list[overlap_entries-1];
+			}
+			overlap_entries--;
+		}
+		/* if there are overlapping entries, decide which "type" to use */
+		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
+		current_type = 0;
+		for (i=0; i<overlap_entries; i++)
+			if (overlap_list[i]->type > current_type)
+				current_type = overlap_list[i]->type;
+		/* continue building up new bios map based on this information */
+		if (current_type != last_type)	{
+			if (last_type != 0)	 {
+				new_bios[new_bios_entry].size =
+					change_point[chgidx]->addr - last_addr;
+				/* move forward only if the new size was non-zero */
+				if (new_bios[new_bios_entry].size != 0)
+					if (++new_bios_entry >= E820MAX)
+						break; 	/* no more space left for new bios entries */
+			}
+			if (current_type != 0)	{
+				new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
+				new_bios[new_bios_entry].type = current_type;
+				last_addr=change_point[chgidx]->addr;
+			}
+			last_type = current_type;
+		}
+	}
+	new_nr = new_bios_entry;   /* retain count for new bios entries */
+
+	/* copy new bios mapping into original location */
+	memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
+	*pnr_map = new_nr;
+
+	return 0;
+}
+
+/*
+ * Copy the BIOS e820 map into a safe place.
+ *
+ * Sanity-check it while we're at it..
+ *
+ * If we're lucky and live on a modern system, the setup code
+ * will have given us a memory map that we can use to properly
+ * set up memory.  If we aren't, we'll fake a memory map.
+ *
+ * We check to see that the memory map contains at least 2 elements
+ * before we'll use it, because the detection code in setup.S may
+ * not be perfect and most every PC known to man has two memory
+ * regions: one from 0 to 640k, and one from 1mb up.  (The IBM
+ * thinkpad 560x, for example, does not cooperate with the memory
+ * detection code.)
+ */
+static int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
+{
+	/* Only one memory region (or negative)? Ignore it */
+	if (nr_map < 2)
+		return -1;
+
+	do {
+		unsigned long long start = biosmap->addr;
+		unsigned long long size = biosmap->size;
+		unsigned long long end = start + size;
+		unsigned long type = biosmap->type;
+
+		/* Overflow in 64 bits? Ignore the memory map. */
+		if (start > end)
+			return -1;
+
+		/*
+		 * Some BIOSes claim RAM in the 640k - 1M region.
+		 * Not right. Fix it up.
+		 */
+		if (type == E820_RAM) {
+			if (start < 0x100000ULL && end > 0xA0000ULL) {
+				if (start < 0xA0000ULL)
+					add_memory_region(start, 0xA0000ULL-start, type);
+				if (end <= 0x100000ULL)
+					continue;
+				start = 0x100000ULL;
+				size = end - start;
+			}
+		}
+		add_memory_region(start, size, type);
+	} while (biosmap++,--nr_map);
+	return 0;
+}
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+struct edd edd;
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+#endif
+/**
+ * copy_edd() - Copy the BIOS EDD information
+ *              from boot_params into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+     memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature));
+     memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info));
+     edd.mbr_signature_nr = EDD_MBR_SIG_NR;
+     edd.edd_info_nr = EDD_NR;
+}
+#else
+static inline void copy_edd(void)
+{
+}
+#endif
+
+/*
+ * Do NOT EVER look at the BIOS memory size location.
+ * It does not work on many machines.
+ */
+#define LOWMEMSIZE()	(0x9f000)
+
+static void __init parse_cmdline_early (char ** cmdline_p)
+{
+	char c = ' ', *to = command_line, *from = saved_command_line;
+	int len = 0;
+	int userdef = 0;
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+
+	for (;;) {
+		if (c != ' ')
+			goto next_char;
+		/*
+		 * "mem=nopentium" disables the 4MB page tables.
+		 * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+		 * to <mem>, overriding the bios size.
+		 * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
+		 * <start> to <start>+<mem>, overriding the bios size.
+		 *
+		 * HPA tells me bootloaders need to parse mem=, so no new
+		 * option should be mem=  [also see Documentation/i386/boot.txt]
+		 */
+		if (!memcmp(from, "mem=", 4)) {
+			if (to != command_line)
+				to--;
+			if (!memcmp(from+4, "nopentium", 9)) {
+				from += 9+4;
+				clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+				disable_pse = 1;
+			} else {
+				/* If the user specifies memory size, we
+				 * limit the BIOS-provided memory map to
+				 * that size. exactmap can be used to specify
+				 * the exact map. mem=number can be used to
+				 * trim the existing memory map.
+				 */
+				unsigned long long mem_size;
+ 
+				mem_size = memparse(from+4, &from);
+				limit_regions(mem_size);
+				userdef=1;
+			}
+		}
+
+		else if (!memcmp(from, "memmap=", 7)) {
+			if (to != command_line)
+				to--;
+			if (!memcmp(from+7, "exactmap", 8)) {
+				from += 8+7;
+				e820.nr_map = 0;
+				userdef = 1;
+			} else {
+				/* If the user specifies memory size, we
+				 * limit the BIOS-provided memory map to
+				 * that size. exactmap can be used to specify
+				 * the exact map. mem=number can be used to
+				 * trim the existing memory map.
+				 */
+				unsigned long long start_at, mem_size;
+ 
+				mem_size = memparse(from+7, &from);
+				if (*from == '@') {
+					start_at = memparse(from+1, &from);
+					add_memory_region(start_at, mem_size, E820_RAM);
+				} else if (*from == '#') {
+					start_at = memparse(from+1, &from);
+					add_memory_region(start_at, mem_size, E820_ACPI);
+				} else if (*from == '$') {
+					start_at = memparse(from+1, &from);
+					add_memory_region(start_at, mem_size, E820_RESERVED);
+				} else {
+					limit_regions(mem_size);
+					userdef=1;
+				}
+			}
+		}
+
+		else if (!memcmp(from, "noexec=", 7))
+			noexec_setup(from + 7);
+
+
+#ifdef  CONFIG_X86_SMP
+		/*
+		 * If the BIOS enumerates physical processors before logical,
+		 * maxcpus=N at enumeration-time can be used to disable HT.
+		 */
+		else if (!memcmp(from, "maxcpus=", 8)) {
+			extern unsigned int maxcpus;
+
+			maxcpus = simple_strtoul(from + 8, NULL, 0);
+		}
+#endif
+
+#ifdef CONFIG_ACPI_BOOT
+		/* "acpi=off" disables both ACPI table parsing and interpreter */
+		else if (!memcmp(from, "acpi=off", 8)) {
+			disable_acpi();
+		}
+
+		/* acpi=force to over-ride black-list */
+		else if (!memcmp(from, "acpi=force", 10)) {
+			acpi_force = 1;
+			acpi_ht = 1;
+			acpi_disabled = 0;
+		}
+
+		/* acpi=strict disables out-of-spec workarounds */
+		else if (!memcmp(from, "acpi=strict", 11)) {
+			acpi_strict = 1;
+		}
+
+		/* Limit ACPI just to boot-time to enable HT */
+		else if (!memcmp(from, "acpi=ht", 7)) {
+			if (!acpi_force)
+				disable_acpi();
+			acpi_ht = 1;
+		}
+		
+		/* "pci=noacpi" disable ACPI IRQ routing and PCI scan */
+		else if (!memcmp(from, "pci=noacpi", 10)) {
+			acpi_disable_pci();
+		}
+		/* "acpi=noirq" disables ACPI interrupt routing */
+		else if (!memcmp(from, "acpi=noirq", 10)) {
+			acpi_noirq_set();
+		}
+
+		else if (!memcmp(from, "acpi_sci=edge", 13))
+			acpi_sci_flags.trigger =  1;
+
+		else if (!memcmp(from, "acpi_sci=level", 14))
+			acpi_sci_flags.trigger = 3;
+
+		else if (!memcmp(from, "acpi_sci=high", 13))
+			acpi_sci_flags.polarity = 1;
+
+		else if (!memcmp(from, "acpi_sci=low", 12))
+			acpi_sci_flags.polarity = 3;
+
+#ifdef CONFIG_X86_IO_APIC
+		else if (!memcmp(from, "acpi_skip_timer_override", 24))
+			acpi_skip_timer_override = 1;
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+		/* disable IO-APIC */
+		else if (!memcmp(from, "noapic", 6))
+			disable_ioapic_setup();
+#endif /* CONFIG_X86_LOCAL_APIC */
+#endif /* CONFIG_ACPI_BOOT */
+
+		/*
+		 * highmem=size forces highmem to be exactly 'size' bytes.
+		 * This works even on boxes that have no highmem otherwise.
+		 * This also works to reduce highmem size on bigger boxes.
+		 */
+		else if (!memcmp(from, "highmem=", 8))
+			highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT;
+	
+		/*
+		 * vmalloc=size forces the vmalloc area to be exactly 'size'
+		 * bytes. This can be used to increase (or decrease) the
+		 * vmalloc area - the default is 128m.
+		 */
+		else if (!memcmp(from, "vmalloc=", 8))
+			__VMALLOC_RESERVE = memparse(from+8, &from);
+
+	next_char:
+		c = *(from++);
+		if (!c)
+			break;
+		if (COMMAND_LINE_SIZE <= ++len)
+			break;
+		*(to++) = c;
+	}
+	*to = '\0';
+	*cmdline_p = command_line;
+	if (userdef) {
+		printk(KERN_INFO "user-defined physical RAM map:\n");
+		print_memory_map("user");
+	}
+}
+
+/*
+ * Callback for efi_memory_walk.
+ */
+static int __init
+efi_find_max_pfn(unsigned long start, unsigned long end, void *arg)
+{
+	unsigned long *max_pfn = arg, pfn;
+
+	if (start < end) {
+		pfn = PFN_UP(end -1);
+		if (pfn > *max_pfn)
+			*max_pfn = pfn;
+	}
+	return 0;
+}
+
+
+/*
+ * Find the highest page frame number we have available
+ */
+void __init find_max_pfn(void)
+{
+	int i;
+
+	max_pfn = 0;
+	if (efi_enabled) {
+		efi_memmap_walk(efi_find_max_pfn, &max_pfn);
+		return;
+	}
+
+	for (i = 0; i < e820.nr_map; i++) {
+		unsigned long start, end;
+		/* RAM? */
+		if (e820.map[i].type != E820_RAM)
+			continue;
+		start = PFN_UP(e820.map[i].addr);
+		end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
+		if (start >= end)
+			continue;
+		if (end > max_pfn)
+			max_pfn = end;
+	}
+}
+
+/*
+ * Determine low and high memory ranges:
+ */
+unsigned long __init find_max_low_pfn(void)
+{
+	unsigned long max_low_pfn;
+
+	max_low_pfn = max_pfn;
+	if (max_low_pfn > MAXMEM_PFN) {
+		if (highmem_pages == -1)
+			highmem_pages = max_pfn - MAXMEM_PFN;
+		if (highmem_pages + MAXMEM_PFN < max_pfn)
+			max_pfn = MAXMEM_PFN + highmem_pages;
+		if (highmem_pages + MAXMEM_PFN > max_pfn) {
+			printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
+			highmem_pages = 0;
+		}
+		max_low_pfn = MAXMEM_PFN;
+#ifndef CONFIG_HIGHMEM
+		/* Maximum memory usable is what is directly addressable */
+		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
+					MAXMEM>>20);
+		if (max_pfn > MAX_NONPAE_PFN)
+			printk(KERN_WARNING "Use a PAE enabled kernel.\n");
+		else
+			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+		max_pfn = MAXMEM_PFN;
+#else /* !CONFIG_HIGHMEM */
+#ifndef CONFIG_X86_PAE
+		if (max_pfn > MAX_NONPAE_PFN) {
+			max_pfn = MAX_NONPAE_PFN;
+			printk(KERN_WARNING "Warning only 4GB will be used.\n");
+			printk(KERN_WARNING "Use a PAE enabled kernel.\n");
+		}
+#endif /* !CONFIG_X86_PAE */
+#endif /* !CONFIG_HIGHMEM */
+	} else {
+		if (highmem_pages == -1)
+			highmem_pages = 0;
+#ifdef CONFIG_HIGHMEM
+		if (highmem_pages >= max_pfn) {
+			printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
+			highmem_pages = 0;
+		}
+		if (highmem_pages) {
+			if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
+				printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
+				highmem_pages = 0;
+			}
+			max_low_pfn -= highmem_pages;
+		}
+#else
+		if (highmem_pages)
+			printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
+#endif
+	}
+	return max_low_pfn;
+}
+
+/*
+ * Free all available memory for boot time allocation.  Used
+ * as a callback function by efi_memory_walk()
+ */
+
+static int __init
+free_available_memory(unsigned long start, unsigned long end, void *arg)
+{
+	/* check max_low_pfn */
+	if (start >= ((max_low_pfn + 1) << PAGE_SHIFT))
+		return 0;
+	if (end >= ((max_low_pfn + 1) << PAGE_SHIFT))
+		end = (max_low_pfn + 1) << PAGE_SHIFT;
+	if (start < end)
+		free_bootmem(start, end - start);
+
+	return 0;
+}
+/*
+ * Register fully available low RAM pages with the bootmem allocator.
+ */
+static void __init register_bootmem_low_pages(unsigned long max_low_pfn)
+{
+	int i;
+
+	if (efi_enabled) {
+		efi_memmap_walk(free_available_memory, NULL);
+		return;
+	}
+	for (i = 0; i < e820.nr_map; i++) {
+		unsigned long curr_pfn, last_pfn, size;
+		/*
+		 * Reserve usable low memory
+		 */
+		if (e820.map[i].type != E820_RAM)
+			continue;
+		/*
+		 * We are rounding up the start address of usable memory:
+		 */
+		curr_pfn = PFN_UP(e820.map[i].addr);
+		if (curr_pfn >= max_low_pfn)
+			continue;
+		/*
+		 * ... and at the end of the usable range downwards:
+		 */
+		last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
+
+		if (last_pfn > max_low_pfn)
+			last_pfn = max_low_pfn;
+
+		/*
+		 * .. finally, did all the rounding and playing
+		 * around just make the area go away?
+		 */
+		if (last_pfn <= curr_pfn)
+			continue;
+
+		size = last_pfn - curr_pfn;
+		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+	}
+}
+
+/*
+ * workaround for Dell systems that neglect to reserve EBDA
+ */
+static void __init reserve_ebda_region(void)
+{
+	unsigned int addr;
+	addr = get_bios_ebda();
+	if (addr)
+		reserve_bootmem(addr, PAGE_SIZE);	
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+void __init setup_bootmem_allocator(void);
+static unsigned long __init setup_memory(void)
+{
+	/*
+	 * partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	min_low_pfn = PFN_UP(init_pg_tables_end);
+
+	find_max_pfn();
+
+	max_low_pfn = find_max_low_pfn();
+
+#ifdef CONFIG_HIGHMEM
+	highstart_pfn = highend_pfn = max_pfn;
+	if (max_pfn > max_low_pfn) {
+		highstart_pfn = max_low_pfn;
+	}
+	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+		pages_to_mb(highend_pfn - highstart_pfn));
+#endif
+	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+			pages_to_mb(max_low_pfn));
+
+	setup_bootmem_allocator();
+
+	return max_low_pfn;
+}
+
+void __init zone_sizes_init(void)
+{
+	unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+	unsigned int max_dma, low;
+
+	max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+	low = max_low_pfn;
+
+	if (low < max_dma)
+		zones_size[ZONE_DMA] = low;
+	else {
+		zones_size[ZONE_DMA] = max_dma;
+		zones_size[ZONE_NORMAL] = low - max_dma;
+#ifdef CONFIG_HIGHMEM
+		zones_size[ZONE_HIGHMEM] = highend_pfn - low;
+#endif
+	}
+	free_area_init(zones_size);
+}
+#else
+extern unsigned long setup_memory(void);
+extern void zone_sizes_init(void);
+#endif /* !CONFIG_DISCONTIGMEM */
+
+void __init setup_bootmem_allocator(void)
+{
+	unsigned long bootmap_size;
+	/*
+	 * Initialize the boot-time allocator (with low memory only):
+	 */
+	bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
+
+	register_bootmem_low_pages(max_low_pfn);
+
+	/*
+	 * Reserve the bootmem bitmap itself as well. We do this in two
+	 * steps (first step was init_bootmem()) because this catches
+	 * the (very unlikely) case of us accidentally initializing the
+	 * bootmem allocator with an invalid RAM area.
+	 */
+	reserve_bootmem(HIGH_MEMORY, (PFN_PHYS(min_low_pfn) +
+			 bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY));
+
+	/*
+	 * reserve physical page 0 - it's a special BIOS page on many boxes,
+	 * enabling clean reboots, SMP operation, laptop functions.
+	 */
+	reserve_bootmem(0, PAGE_SIZE);
+
+	/* reserve EBDA region, it's a 4K region */
+	reserve_ebda_region();
+
+    /* could be an AMD 768MPX chipset. Reserve a page  before VGA to prevent
+       PCI prefetch into it (errata #56). Usually the page is reserved anyways,
+       unless you have no PS/2 mouse plugged in. */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+	    boot_cpu_data.x86 == 6)
+	     reserve_bootmem(0xa0000 - 4096, 4096);
+
+#ifdef CONFIG_SMP
+	/*
+	 * But first pinch a few for the stack/trampoline stuff
+	 * FIXME: Don't need the extra page at 4K, but need to fix
+	 * trampoline before removing it. (see the GDT stuff)
+	 */
+	reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
+#endif
+#ifdef CONFIG_ACPI_SLEEP
+	/*
+	 * Reserve low memory region for sleep support.
+	 */
+	acpi_reserve_bootmem();
+#endif
+#ifdef CONFIG_X86_FIND_SMP_CONFIG
+	/*
+	 * Find and reserve possible boot-time SMP configuration:
+	 */
+	find_smp_config();
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (LOADER_TYPE && INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
+			reserve_bootmem(INITRD_START, INITRD_SIZE);
+			initrd_start =
+				INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
+			initrd_end = initrd_start+INITRD_SIZE;
+		}
+		else {
+			printk(KERN_ERR "initrd extends beyond end of memory "
+			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+			    INITRD_START + INITRD_SIZE,
+			    max_low_pfn << PAGE_SHIFT);
+			initrd_start = 0;
+		}
+	}
+#endif
+}
+
+/*
+ * The node 0 pgdat is initialized before all of these because
+ * it's needed for bootmem.  node>0 pgdats have their virtual
+ * space allocated before the pagetables are in place to access
+ * them, so they can't be cleared then.
+ *
+ * This should all compile down to nothing when NUMA is off.
+ */
+void __init remapped_pgdat_init(void)
+{
+	int nid;
+
+	for_each_online_node(nid) {
+		if (nid != 0)
+			memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+	}
+}
+
+/*
+ * Request address space for all standard RAM and ROM resources
+ * and also for regions reported as reserved by the e820.
+ */
+static void __init
+legacy_init_iomem_resources(struct resource *code_resource, struct resource *data_resource)
+{
+	int i;
+
+	probe_roms();
+	for (i = 0; i < e820.nr_map; i++) {
+		struct resource *res;
+		if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
+			continue;
+		res = alloc_bootmem_low(sizeof(struct resource));
+		switch (e820.map[i].type) {
+		case E820_RAM:	res->name = "System RAM"; break;
+		case E820_ACPI:	res->name = "ACPI Tables"; break;
+		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
+		default:	res->name = "reserved";
+		}
+		res->start = e820.map[i].addr;
+		res->end = res->start + e820.map[i].size - 1;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		request_resource(&iomem_resource, res);
+		if (e820.map[i].type == E820_RAM) {
+			/*
+			 *  We don't know which RAM region contains kernel data,
+			 *  so we try it repeatedly and let the resource manager
+			 *  test it.
+			 */
+			request_resource(res, code_resource);
+			request_resource(res, data_resource);
+		}
+	}
+}
+
+/*
+ * Request address space for all standard resources
+ */
+static void __init register_memory(void)
+{
+	unsigned long gapstart, gapsize;
+	unsigned long long last;
+	int	      i;
+
+	if (efi_enabled)
+		efi_initialize_iomem_resources(&code_resource, &data_resource);
+	else
+		legacy_init_iomem_resources(&code_resource, &data_resource);
+
+	/* EFI systems may still have VGA */
+	request_resource(&iomem_resource, &video_ram_resource);
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+		request_resource(&ioport_resource, &standard_io_resources[i]);
+
+	/*
+	 * Search for the bigest gap in the low 32 bits of the e820
+	 * memory space.
+	 */
+	last = 0x100000000ull;
+	gapstart = 0x10000000;
+	gapsize = 0x400000;
+	i = e820.nr_map;
+	while (--i >= 0) {
+		unsigned long long start = e820.map[i].addr;
+		unsigned long long end = start + e820.map[i].size;
+
+		/*
+		 * Since "last" is at most 4GB, we know we'll
+		 * fit in 32 bits if this condition is true
+		 */
+		if (last > end) {
+			unsigned long gap = last - end;
+
+			if (gap > gapsize) {
+				gapsize = gap;
+				gapstart = end;
+			}
+		}
+		if (start < last)
+			last = start;
+	}
+
+	/*
+	 * Start allocating dynamic PCI memory a bit into the gap,
+	 * aligned up to the nearest megabyte.
+	 *
+	 * Question: should we try to pad it up a bit (do something
+	 * like " + (gapsize >> 3)" in there too?). We now have the
+	 * technology.
+	 */
+	pci_mem_start = (gapstart + 0xfffff) & ~0xfffff;
+
+	printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
+		pci_mem_start, gapstart, gapsize);
+}
+
+/* Use inline assembly to define this because the nops are defined 
+   as inline assembly strings in the include files and we cannot 
+   get them easily into strings. */
+asm("\t.data\nintelnops: " 
+    GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
+    GENERIC_NOP7 GENERIC_NOP8); 
+asm("\t.data\nk8nops: " 
+    K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
+    K8_NOP7 K8_NOP8); 
+asm("\t.data\nk7nops: " 
+    K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
+    K7_NOP7 K7_NOP8); 
+    
+extern unsigned char intelnops[], k8nops[], k7nops[];
+static unsigned char *intel_nops[ASM_NOP_MAX+1] = { 
+     NULL,
+     intelnops,
+     intelnops + 1,
+     intelnops + 1 + 2,
+     intelnops + 1 + 2 + 3,
+     intelnops + 1 + 2 + 3 + 4,
+     intelnops + 1 + 2 + 3 + 4 + 5,
+     intelnops + 1 + 2 + 3 + 4 + 5 + 6,
+     intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+}; 
+static unsigned char *k8_nops[ASM_NOP_MAX+1] = { 
+     NULL,
+     k8nops,
+     k8nops + 1,
+     k8nops + 1 + 2,
+     k8nops + 1 + 2 + 3,
+     k8nops + 1 + 2 + 3 + 4,
+     k8nops + 1 + 2 + 3 + 4 + 5,
+     k8nops + 1 + 2 + 3 + 4 + 5 + 6,
+     k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+}; 
+static unsigned char *k7_nops[ASM_NOP_MAX+1] = { 
+     NULL,
+     k7nops,
+     k7nops + 1,
+     k7nops + 1 + 2,
+     k7nops + 1 + 2 + 3,
+     k7nops + 1 + 2 + 3 + 4,
+     k7nops + 1 + 2 + 3 + 4 + 5,
+     k7nops + 1 + 2 + 3 + 4 + 5 + 6,
+     k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+}; 
+static struct nop { 
+     int cpuid; 
+     unsigned char **noptable; 
+} noptypes[] = { 
+     { X86_FEATURE_K8, k8_nops }, 
+     { X86_FEATURE_K7, k7_nops }, 
+     { -1, NULL }
+}; 
+
+/* Replace instructions with better alternatives for this CPU type.
+
+   This runs before SMP is initialized to avoid SMP problems with
+   self modifying code. This implies that assymetric systems where
+   APs have less capabilities than the boot processor are not handled. 
+   In this case boot with "noreplacement". */ 
+void apply_alternatives(void *start, void *end) 
+{ 
+	struct alt_instr *a; 
+	int diff, i, k;
+        unsigned char **noptable = intel_nops; 
+	for (i = 0; noptypes[i].cpuid >= 0; i++) { 
+		if (boot_cpu_has(noptypes[i].cpuid)) { 
+			noptable = noptypes[i].noptable;
+			break;
+		}
+	} 
+	for (a = start; (void *)a < end; a++) { 
+		if (!boot_cpu_has(a->cpuid))
+			continue;
+		BUG_ON(a->replacementlen > a->instrlen); 
+		memcpy(a->instr, a->replacement, a->replacementlen); 
+		diff = a->instrlen - a->replacementlen; 
+		/* Pad the rest with nops */
+		for (i = a->replacementlen; diff > 0; diff -= k, i += k) {
+			k = diff;
+			if (k > ASM_NOP_MAX)
+				k = ASM_NOP_MAX;
+			memcpy(a->instr + i, noptable[k], k); 
+		} 
+	}
+} 
+
+static int no_replacement __initdata = 0; 
+ 
+void __init alternative_instructions(void)
+{
+	extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
+	if (no_replacement) 
+		return;
+	apply_alternatives(__alt_instructions, __alt_instructions_end);
+}
+
+static int __init noreplacement_setup(char *s)
+{ 
+     no_replacement = 1; 
+     return 0; 
+} 
+
+__setup("noreplacement", noreplacement_setup); 
+
+static char * __init machine_specific_memory_setup(void);
+
+#ifdef CONFIG_MCA
+static void set_mca_bus(int x)
+{
+	MCA_bus = x;
+}
+#else
+static void set_mca_bus(int x) { }
+#endif
+
+/*
+ * Determine if we were loaded by an EFI loader.  If so, then we have also been
+ * passed the efi memmap, systab, etc., so we should use these data structures
+ * for initialization.  Note, the efi init code path is determined by the
+ * global efi_enabled. This allows the same kernel image to be used on existing
+ * systems (with a traditional BIOS) as well as on EFI systems.
+ */
+void __init setup_arch(char **cmdline_p)
+{
+	unsigned long max_low_pfn;
+
+	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+	pre_setup_arch_hook();
+	early_cpu_init();
+
+	/*
+	 * FIXME: This isn't an official loader_type right
+	 * now but does currently work with elilo.
+	 * If we were configured as an EFI kernel, check to make
+	 * sure that we were loaded correctly from elilo and that
+	 * the system table is valid.  If not, then initialize normally.
+	 */
+#ifdef CONFIG_EFI
+	if ((LOADER_TYPE == 0x50) && EFI_SYSTAB)
+		efi_enabled = 1;
+#endif
+
+ 	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+ 	drive_info = DRIVE_INFO;
+ 	screen_info = SCREEN_INFO;
+	edid_info = EDID_INFO;
+	apm_info.bios = APM_BIOS_INFO;
+	ist_info = IST_INFO;
+	saved_videomode = VIDEO_MODE;
+	if( SYS_DESC_TABLE.length != 0 ) {
+		set_mca_bus(SYS_DESC_TABLE.table[3] & 0x2);
+		machine_id = SYS_DESC_TABLE.table[0];
+		machine_submodel_id = SYS_DESC_TABLE.table[1];
+		BIOS_revision = SYS_DESC_TABLE.table[2];
+	}
+	bootloader_type = LOADER_TYPE;
+
+#ifdef CONFIG_BLK_DEV_RAM
+	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+	ARCH_SETUP
+	if (efi_enabled)
+		efi_init();
+	else {
+		printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+		print_memory_map(machine_specific_memory_setup());
+	}
+
+	copy_edd();
+
+	if (!MOUNT_ROOT_RDONLY)
+		root_mountflags &= ~MS_RDONLY;
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
+
+	code_resource.start = virt_to_phys(_text);
+	code_resource.end = virt_to_phys(_etext)-1;
+	data_resource.start = virt_to_phys(_etext);
+	data_resource.end = virt_to_phys(_edata)-1;
+
+	parse_cmdline_early(cmdline_p);
+
+	max_low_pfn = setup_memory();
+
+	/*
+	 * NOTE: before this point _nobody_ is allowed to allocate
+	 * any memory using the bootmem allocator.  Although the
+	 * alloctor is now initialised only the first 8Mb of the kernel
+	 * virtual address space has been mapped.  All allocations before
+	 * paging_init() has completed must use the alloc_bootmem_low_pages()
+	 * variant (which allocates DMA'able memory) and care must be taken
+	 * not to exceed the 8Mb limit.
+	 */
+
+#ifdef CONFIG_SMP
+	smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
+#endif
+	paging_init();
+	remapped_pgdat_init();
+	zone_sizes_init();
+
+	/*
+	 * NOTE: at this point the bootmem allocator is fully available.
+	 */
+
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		char *s = strstr(*cmdline_p, "earlyprintk=");
+		if (s) {
+			extern void setup_early_printk(char *);
+
+			setup_early_printk(s);
+			printk("early console enabled\n");
+		}
+	}
+#endif
+
+
+	dmi_scan_machine();
+
+#ifdef CONFIG_X86_GENERICARCH
+	generic_apic_probe(*cmdline_p);
+#endif	
+	if (efi_enabled)
+		efi_map_memmap();
+
+	/*
+	 * Parse the ACPI tables for possible boot-time SMP configuration.
+	 */
+	acpi_boot_table_init();
+	acpi_boot_init();
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (smp_found_config)
+		get_smp_config();
+#endif
+
+	register_memory();
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+		conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}
+
+#include "setup_arch_post.h"
+/*
+ * Local Variables:
+ * mode:c
+ * c-file-style:"k&r"
+ * c-basic-offset:8
+ * End:
+ */
-- 
cgit v1.2.2