From faee9a5dc9d8399cc3b1b8e18b6d7ff7b17f1af1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 26 Jun 2006 13:56:10 +0200 Subject: [PATCH] i386/x86-64: Use new official CPUID to get APICID/core split on AMD platforms Previously the apicid<->coreid split was computed based on the max number of cores. Now use a new CPUID AMD defined for that. On most systems right now it should be 0 and the old method will be used. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/amd.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch/i386/kernel/cpu/amd.c') diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index 786d1a57048b..b9c93d9789e7 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -224,15 +224,17 @@ static void __init init_amd(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_HT /* - * On a AMD dual core setup the lower bits of the APIC id - * distingush the cores. Assumes number of cores is a power - * of two. + * On a AMD multi core setup the lower bits of the APIC id + * distingush the cores. */ if (c->x86_max_cores > 1) { int cpu = smp_processor_id(); - unsigned bits = 0; - while ((1 << bits) < c->x86_max_cores) - bits++; + unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf; + + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<>= bits; printk(KERN_INFO "CPU %d(%d) -> Core %d\n", -- cgit v1.2.2