From 793dc27b51b2ffff95b72408e2ef44e0995c185b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 26 Mar 2008 08:09:12 +0800 Subject: [Blackfin] arch: conditionally enable flash resources since it requests the async memory bank Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/stamp.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index b2ac4816ae62..ecf449b322d9 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -109,6 +109,7 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", @@ -152,6 +153,7 @@ static struct platform_device stamp_flash_device = { .num_resources = ARRAY_SIZE(stamp_flash_resource), .resource = stamp_flash_resource, }; +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -515,7 +517,10 @@ static struct platform_device *stamp_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) &stamp_flash_device, +#endif }; static int __init stamp_init(void) -- cgit v1.2.2 From 81d9c7f27dd679df6d03df53eba4fd12caafdb47 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 26 Mar 2008 10:02:13 +0800 Subject: [Blackfin] arch: add i2c board info struct and move to new-style i2c interface Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/stamp.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index ecf449b322d9..32b37afc6e6a 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -40,6 +40,7 @@ #endif #include #include +#include #include #include #include @@ -474,6 +475,31 @@ static struct platform_device i2c_gpio_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) + { + I2C_BOARD_INFO("ad7142_joystick", 0x2C), + .type = "ad7142_joystick", + .irq = 39, + }, +#endif +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = 39, + }, +#endif +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -528,6 +554,12 @@ static int __init stamp_init(void) int ret; printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) return ret; -- cgit v1.2.2 From b85d858b40a28107ee50ca9e89f57c0e35c251c6 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 23 Apr 2008 09:39:01 +0800 Subject: [Blackfin] arch: __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Cc: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/H8606.c | 2 +- arch/blackfin/mach-bf533/boards/cm_bf533.c | 2 +- arch/blackfin/mach-bf533/boards/ezkit.c | 2 +- arch/blackfin/mach-bf533/boards/generic_board.c | 2 +- arch/blackfin/mach-bf533/boards/stamp.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 97378b0a9753..39c3dd3d595c 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -411,7 +411,7 @@ static struct platform_device *h8606_devices[] __initdata = { static int __init H8606_init(void) { printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 886f260d9359..7e7b7c9a5c85 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -355,7 +355,7 @@ static struct platform_device *cm_bf533_devices[] __initdata = { static int __init cm_bf533_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 241b5a20a36a..35c1efdf8e16 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -369,7 +369,7 @@ static struct platform_device *ezkit_devices[] __initdata = { static int __init ezkit_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c index e359a0d6467f..82b1f6a60e3f 100644 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -84,7 +84,7 @@ static struct platform_device *generic_board_devices[] __initdata = { static int __init generic_board_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 32b37afc6e6a..3a727d3676e1 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -553,7 +553,7 @@ static int __init stamp_init(void) { int ret; - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); #ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, -- cgit v1.2.2 From 6ed839423073251b513664fdadb180634aed704b Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Thu, 24 Apr 2008 04:43:14 +0800 Subject: [Blackfin] arch: Resolve the clash issue of UART defines between blackfin headers and include/linux/serial_reg. Signed-off-by: Graf Yang Cc: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/head.S | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 1ded945a6fa0..d9ba2b11e013 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -151,26 +151,26 @@ ENTRY(__start) /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); + p0.h = hi(BFIN_UART_LCR); + p0.l = lo(BFIN_UART_LCR); r0 = 0x0(Z); w[p0] = r0.L; /* To enable DLL writes */ ssync; - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); + p0.h = hi(BFIN_UART_DLL); + p0.l = lo(BFIN_UART_DLL); r0 = 0x0(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); + p0.h = hi(BFIN_UART_DLH); + p0.l = lo(BFIN_UART_DLH); r0 = 0x00(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); + p0.h = hi(BFIN_UART_GCTL); + p0.l = lo(BFIN_UART_GCTL); r0 = 0x0(Z); w[p0] = r0.L; /* To enable UART clock */ ssync; -- cgit v1.2.2 From 5d1617b247aa63698618215a9f39ecf905d55779 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Apr 2008 05:03:26 +0800 Subject: [Blackfin] arch: merge ip0x-specific board changes Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/Kconfig | 6 + arch/blackfin/mach-bf533/boards/Makefile | 1 + arch/blackfin/mach-bf533/boards/ip0x.c | 279 +++++++++++++++++++++++++++++++ 3 files changed, 286 insertions(+) create mode 100644 arch/blackfin/mach-bf533/boards/ip0x.c (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 751de5110afc..840059241fbe 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -26,6 +26,12 @@ config H8606_HVSISTEMAS help HV Sistemas H8606 board support. +config BFIN532_IP0X + bool "IP04/IP08 IP-PBX" + depends on (BF532) + help + Core support for IP04/IP04 open hardware IP-PBX. + config GENERIC_BF533_BOARD bool "Generic" help diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 54f57fb9791e..b7a1a1d79bda 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o +obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c new file mode 100644 index 000000000000..4af61474a991 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -0,0 +1,279 @@ +/* + * File: arch/blackfin/mach-bf533/ip0x.c + * Based on: arch/blackfin/mach-bf533/bf1.c + * Based on: arch/blackfin/mach-bf533/stamp.c + * Author: Ivan Danov + * Modified for IP0X David Rowe + * + * Created: 2007 + * Description: Board info file for the IP04/IP08 boards, which + * are derived from the BlackfinOne V2.0 boards. + * + * Modified: + * COpyright 2007 David Rowe + * Copyright 2006 Intratrade Ltd. + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include +#endif +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "IP04/IP08"; + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_BFIN532_IP0X) +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + +#include + +static struct resource dm9000_resource1[] = { + { + .start = 0x20100000, + .end = 0x20100000 + 1, + .flags = IORESOURCE_MEM + },{ + .start = 0x20100000 + 2, + .end = 0x20100000 + 3, + .flags = IORESOURCE_MEM + },{ + .start = IRQ_PF15, + .end = IRQ_PF15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +static struct resource dm9000_resource2[] = { + { + .start = 0x20200000, + .end = 0x20200000 + 1, + .flags = IORESOURCE_MEM + },{ + .start = 0x20200000 + 2, + .end = 0x20200000 + 3, + .flags = IORESOURCE_MEM + },{ + .start = IRQ_PF14, + .end = IRQ_PF14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +/* +* for the moment we limit ourselves to 16bit IO until some +* better IO routines can be written and tested +*/ +static struct dm9000_plat_data dm9000_platdata1 = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device1 = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000_resource1), + .resource = dm9000_resource1, + .dev = { + .platform_data = &dm9000_platdata1, + } +}; + +static struct dm9000_plat_data dm9000_platdata2 = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device2 = { + .name = "dm9000", + .id = 1, + .num_resources = ARRAY_SIZE(dm9000_resource2), + .resource = dm9000_resource2, + .dev = { + .platform_data = &dm9000_platdata2, + } +}; + +#endif +#endif + + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { +/* + * CPOL (Clock Polarity) + * 0 - Active high SCK + * 1 - Active low SCK + * CPHA (Clock Phase) Selects transfer format and operation mode + * 0 - SCLK toggles from middle of the first data bit, slave select + * pins controlled by hardware. + * 1 - SCLK toggles from beginning of first data bit, slave select + * pins controller by user software. + * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work + * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0 + * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1 + */ + .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */ + .enable_dma = 0, /* if 1 - block!!! */ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +/* Notice: for blackfin, the speed_hz is the value of register + * SPI_BAUD, not the real baudrate */ +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc", + .max_speed_hz = 2, + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 1, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20300000 + 2, + .end = 0x20300000 + 3, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF11, + .end = IRQ_PF11, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, /* external OC */ + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + + +static struct platform_device *ip0x_devices[] __initdata = { +#if defined(CONFIG_BFIN532_IP0X) +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device1, + &dm9000_device2, +#endif +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif +}; + +static int __init ip0x_init(void) +{ + int i; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + for (i = 0; i < ARRAY_SIZE(bfin_spi_board_info); ++i) { + int j = 1 << bfin_spi_board_info[i].chip_select; + /* set spi cs to 1 */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | j); + bfin_write_FIO_FLAG_S(j); + } + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(ip0x_init); -- cgit v1.2.2 From 3132b58679261ee0edfda3a846539bb1b0750705 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Apr 2008 05:12:09 +0800 Subject: [Blackfin] arch: theres no need to declare ram{end,start,base} in the head.S files theres no need to declare ram{end,start,base} in the head.S files when declaring them with the other memory related variables in setup.c is so much simpler/nicer Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/head.S | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index d9ba2b11e013..1295deac00a4 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -36,9 +36,6 @@ #include #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -431,18 +428,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 -- cgit v1.2.2 From ac86a9785384843e8359c45a042cc4f87953d4c8 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Thu, 24 Apr 2008 05:23:31 +0800 Subject: [Blackfin] arch: Consistently export base_addr for all Blackfin variants. Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/dma.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c index 6c909cf4f7bf..8d80efce396e 100644 --- a/arch/blackfin/mach-bf533/dma.c +++ b/arch/blackfin/mach-bf533/dma.c @@ -26,6 +26,8 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include + #include #include @@ -43,6 +45,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(base_addr); int channel2irq(unsigned int channel) { -- cgit v1.2.2 From 7795566495ff90c541a4654d3c903ab277abadfd Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Thu, 24 Apr 2008 05:31:18 +0800 Subject: [Blackfin] arch: Give the DMA base registers a more descriptive name The DMA base registers are available in a global named "base_addr" for every Blackfin variant. Give this a more descriptive name, and remove duplicate tables from some drivers. Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c index 8d80efce396e..28655c1cb7dc 100644 --- a/arch/blackfin/mach-bf533/dma.c +++ b/arch/blackfin/mach-bf533/dma.c @@ -31,7 +31,7 @@ #include #include -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -45,7 +45,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; -EXPORT_SYMBOL(base_addr); +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { -- cgit v1.2.2 From 5be36d22b28f01e5074f78b29aa6128da0a53641 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Fri, 25 Apr 2008 03:09:15 +0800 Subject: [Blackfin] arch: add Blackfin on-chip SIR IrDA driver support - add platform device resources in board files - add new bfin_sir.h to each machines Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/H8606.c | 23 +++++++++++++++++++++++ arch/blackfin/mach-bf533/boards/cm_bf533.c | 23 +++++++++++++++++++++++ arch/blackfin/mach-bf533/boards/ezkit.c | 23 +++++++++++++++++++++++ arch/blackfin/mach-bf533/boards/ip0x.c | 24 ++++++++++++++++++++++++ arch/blackfin/mach-bf533/boards/stamp.c | 23 +++++++++++++++++++++++ 5 files changed, 116 insertions(+) (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 39c3dd3d595c..7cc4864f6aaf 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -304,6 +304,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) #include @@ -403,6 +422,10 @@ static struct platform_device *h8606_devices[] __initdata = { &serial8250_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) &opencores_kbd_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 7e7b7c9a5c85..a03149c72681 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -234,6 +234,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -327,6 +346,10 @@ static struct platform_device *cm_bf533_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 35c1efdf8e16..08a7943949ae 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -237,6 +237,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define PATA_INT 55 @@ -352,6 +371,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index 4af61474a991..5864892de314 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -196,6 +196,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) static struct resource isp1362_hcd_resources[] = { { @@ -251,6 +270,11 @@ static struct platform_device *ip0x_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 3a727d3676e1..fddce32901a2 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -370,6 +370,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -525,6 +544,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, -- cgit v1.2.2 From fe44193c55e26b9b835722b5ee2519972f59c540 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 25 Apr 2008 04:52:11 +0800 Subject: [Blackfin] arch: Functional power management support: Remove broken cpu frequency scaling drivers Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/Makefile | 2 - arch/blackfin/mach-bf533/cpu.c | 158 -------------------------------------- 2 files changed, 160 deletions(-) delete mode 100644 arch/blackfin/mach-bf533/cpu.c (limited to 'arch/blackfin/mach-bf533') diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile index 8cce1736360d..aa9f2647ee0c 100644 --- a/arch/blackfin/mach-bf533/Makefile +++ b/arch/blackfin/mach-bf533/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c deleted file mode 100644 index b7a0e0fbd9af..000000000000 --- a/arch/blackfin/mach-bf533/cpu.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * File: arch/blackfin/mach-bf533/cpu.c - * Based on: - * Author: michael.kang@analog.com - * - * Created: - * Description: clock scaling for the bf533 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -/* CONFIG_CLKIN_HZ=11059200 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ -#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ -#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ -#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ -#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ -#define VCO(x) VCO##x - -#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf533_freq_table[] = { - FREQ(1), - FREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - FREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf533_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz, vco_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - return cclk_mhz; -} - -static int bf533_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index, vco_index; - int i; - - struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target(policy, bf533_freq_table, target_freq, relation, &index)) - return -EINVAL; - cclk_mhz = bf533_freq_table[index].frequency; - vco_mhz = bf533_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf533_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf533_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf533_freq_table); -} - -static int __init __bf533_cpu_init(struct cpufreq_policy *policy) -{ - int result; - - if (policy->cpu != 0) - return -EINVAL; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf533_getfreq(0); - cpufreq_frequency_table_get_attr(bf533_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf533_freq_table); -} - -static struct freq_attr *bf533_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf533_driver = { - .verify = bf533_verify_speed, - .target = bf533_target, - .get = bf533_getfreq, - .init = __bf533_cpu_init, - .name = "bf533", - .owner = THIS_MODULE, - .attr = bf533_freq_attr, -}; - -static int __init bf533_cpu_init(void) -{ - return cpufreq_register_driver(&bf533_driver); -} - -static void __exit bf533_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf533_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for BF533 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf533_cpu_init); -module_exit(bf533_cpu_exit); -- cgit v1.2.2