From 5d1617b247aa63698618215a9f39ecf905d55779 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Apr 2008 05:03:26 +0800 Subject: [Blackfin] arch: merge ip0x-specific board changes Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/Kconfig | 6 + arch/blackfin/mach-bf533/boards/Makefile | 1 + arch/blackfin/mach-bf533/boards/ip0x.c | 279 +++++++++++++++++++++++++++++++ 3 files changed, 286 insertions(+) create mode 100644 arch/blackfin/mach-bf533/boards/ip0x.c (limited to 'arch/blackfin/mach-bf533/boards') diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 751de5110afc..840059241fbe 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -26,6 +26,12 @@ config H8606_HVSISTEMAS help HV Sistemas H8606 board support. +config BFIN532_IP0X + bool "IP04/IP08 IP-PBX" + depends on (BF532) + help + Core support for IP04/IP04 open hardware IP-PBX. + config GENERIC_BF533_BOARD bool "Generic" help diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 54f57fb9791e..b7a1a1d79bda 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o +obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c new file mode 100644 index 000000000000..4af61474a991 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -0,0 +1,279 @@ +/* + * File: arch/blackfin/mach-bf533/ip0x.c + * Based on: arch/blackfin/mach-bf533/bf1.c + * Based on: arch/blackfin/mach-bf533/stamp.c + * Author: Ivan Danov + * Modified for IP0X David Rowe + * + * Created: 2007 + * Description: Board info file for the IP04/IP08 boards, which + * are derived from the BlackfinOne V2.0 boards. + * + * Modified: + * COpyright 2007 David Rowe + * Copyright 2006 Intratrade Ltd. + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include +#endif +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "IP04/IP08"; + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_BFIN532_IP0X) +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + +#include + +static struct resource dm9000_resource1[] = { + { + .start = 0x20100000, + .end = 0x20100000 + 1, + .flags = IORESOURCE_MEM + },{ + .start = 0x20100000 + 2, + .end = 0x20100000 + 3, + .flags = IORESOURCE_MEM + },{ + .start = IRQ_PF15, + .end = IRQ_PF15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +static struct resource dm9000_resource2[] = { + { + .start = 0x20200000, + .end = 0x20200000 + 1, + .flags = IORESOURCE_MEM + },{ + .start = 0x20200000 + 2, + .end = 0x20200000 + 3, + .flags = IORESOURCE_MEM + },{ + .start = IRQ_PF14, + .end = IRQ_PF14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +/* +* for the moment we limit ourselves to 16bit IO until some +* better IO routines can be written and tested +*/ +static struct dm9000_plat_data dm9000_platdata1 = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device1 = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000_resource1), + .resource = dm9000_resource1, + .dev = { + .platform_data = &dm9000_platdata1, + } +}; + +static struct dm9000_plat_data dm9000_platdata2 = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device2 = { + .name = "dm9000", + .id = 1, + .num_resources = ARRAY_SIZE(dm9000_resource2), + .resource = dm9000_resource2, + .dev = { + .platform_data = &dm9000_platdata2, + } +}; + +#endif +#endif + + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { +/* + * CPOL (Clock Polarity) + * 0 - Active high SCK + * 1 - Active low SCK + * CPHA (Clock Phase) Selects transfer format and operation mode + * 0 - SCLK toggles from middle of the first data bit, slave select + * pins controlled by hardware. + * 1 - SCLK toggles from beginning of first data bit, slave select + * pins controller by user software. + * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work + * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0 + * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1 + */ + .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */ + .enable_dma = 0, /* if 1 - block!!! */ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +/* Notice: for blackfin, the speed_hz is the value of register + * SPI_BAUD, not the real baudrate */ +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc", + .max_speed_hz = 2, + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 1, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20300000 + 2, + .end = 0x20300000 + 3, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF11, + .end = IRQ_PF11, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, /* external OC */ + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + + +static struct platform_device *ip0x_devices[] __initdata = { +#if defined(CONFIG_BFIN532_IP0X) +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device1, + &dm9000_device2, +#endif +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif +}; + +static int __init ip0x_init(void) +{ + int i; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + for (i = 0; i < ARRAY_SIZE(bfin_spi_board_info); ++i) { + int j = 1 << bfin_spi_board_info[i].chip_select; + /* set spi cs to 1 */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | j); + bfin_write_FIO_FLAG_S(j); + } + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(ip0x_init); -- cgit v1.2.2