From c2cdaffe0bb32015e84af8e31f73e620ba271165 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 7 Dec 2010 16:26:55 -0800 Subject: omap: Fix gpio_request calls to happen as arch_initcall Looks like some boards are calling gpio_request from init_irq. This will make the request_irq fail, as GPIO will be initialized as postcore_initcall. Reported-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-fsample.c | 21 +++++++++++---------- arch/arm/mach-omap1/board-h2.c | 3 ++- arch/arm/mach-omap1/board-h3.c | 21 +++++++++++---------- arch/arm/mach-omap1/board-innovator.c | 3 ++- arch/arm/mach-omap1/board-osk.c | 5 +++-- arch/arm/mach-omap1/board-perseus2.c | 21 +++++++++++---------- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- 8 files changed, 42 insertions(+), 36 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 149fdd32e127..295ab6713670 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -120,6 +120,15 @@ static struct resource smc91x_resources[] = { }, }; +static void __init fsample_init_smc91x(void) +{ + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + static struct mtd_partition nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -285,6 +294,8 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { + fsample_init_smc91x(); + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); @@ -312,21 +323,11 @@ static void __init omap_fsample_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init fsample_init_smc91x(void) -{ - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - static void __init omap_fsample_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - fsample_init_smc91x(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 197adb49dc5a..dd35efdefcf7 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -375,7 +375,6 @@ static void __init h2_init_irq(void) omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - h2_init_smc91x(); } static struct omap_usb_config h2_usb_config __initdata = { @@ -403,6 +402,8 @@ static struct omap_board_config_kernel h2_config[] __initdata = { static void __init h2_init(void) { + h2_init_smc91x(); + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped * to address 0 by a dip switch), NAND on CS2B. The NAND driver will * notice whether a NAND chip is enabled at probe time. diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 9126e3e37b4a..78719198809e 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -264,6 +264,15 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static void __init h3_init_smc91x(void) +{ + omap_cfg_reg(W15_1710_GPIO40); + if (gpio_request(40, "SMC91x irq") < 0) { + printk("Error requesting gpio 40 for smc91x irq\n"); + return; + } +} + #define GPTIMER_BASE 0xFFFB1400 #define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) #define GPTIMER_REGS_SIZE 0x46 @@ -376,6 +385,8 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { static void __init h3_init(void) { + h3_init_smc91x(); + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped * to address 0 by a dip switch), NAND on CS2B. The NAND driver will * notice whether a NAND chip is enabled at probe time. @@ -422,21 +433,11 @@ static void __init h3_init(void) h3_mmc_init(); } -static void __init h3_init_smc91x(void) -{ - omap_cfg_reg(W15_1710_GPIO40); - if (gpio_request(40, "SMC91x irq") < 0) { - printk("Error requesting gpio 40 for smc91x irq\n"); - return; - } -} - static void __init h3_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - h3_init_smc91x(); } static void __init h3_map_io(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index dc2b86fd66c1..0feaa6731c7e 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -296,7 +296,6 @@ static void __init innovator_init_irq(void) omap1510_fpga_init_irq(); } #endif - innovator_init_smc91x(); } #ifdef CONFIG_ARCH_OMAP15XX @@ -387,6 +386,8 @@ static struct omap_board_config_kernel innovator_config[] = { static void __init innovator_init(void) { + innovator_init_smc91x(); + #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { unsigned char reg; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e9dd79149a8e..30bdbdb93636 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -284,8 +284,6 @@ static void __init osk_init_irq(void) omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - osk_init_smc91x(); - osk_init_cf(); } static struct omap_usb_config osk_usb_config __initdata = { @@ -541,6 +539,9 @@ static void __init osk_init(void) { u32 l; + osk_init_smc91x(); + osk_init_cf(); + /* Workaround for wrong CS3 (NOR flash) timing * There are some U-Boot versions out there which configure * wrong CS3 memory timings. This mainly leads to CRC diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index a8d16a255c18..07660be4f228 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -251,8 +251,19 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = { { OMAP_TAG_LCD, &perseus2_lcd_config }, }; +static void __init perseus2_init_smc91x(void) +{ + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + static void __init omap_perseus2_init(void) { + perseus2_init_smc91x(); + if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); gpio_direction_input(P2_NAND_RB_GPIO_PIN); @@ -280,21 +291,11 @@ static void __init omap_perseus2_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init perseus2_init_smc91x(void) -{ - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - perseus2_init_smc91x(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 2c6db1aaeb29..6ae777e08896 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -281,7 +281,6 @@ static void __init omap_apollon_init_irq(void) omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); - apollon_init_smc91x(); } static void __init apollon_led_init(void) @@ -324,6 +323,7 @@ static void __init omap_apollon_init(void) omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); + apollon_init_smc91x(); apollon_led_init(); apollon_flash_init(); apollon_usb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 001fd9713f39..3dab44e3eb42 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -295,7 +295,6 @@ static void __init omap_ldp_init_irq(void) omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); - ldp_init_smsc911x(); } static struct twl4030_usb_data ldp_usb_data = { @@ -426,6 +425,7 @@ static struct mtd_partition ldp_nand_partitions[] = { static void __init omap_ldp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54; -- cgit v1.2.2 From 2fae7fbed072705d91e09ed393b2e580b2d895fc Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:55 -0800 Subject: OMAP: GPIO: prepare for platform driver Prepare for implementing GPIO as a platform driver. Modifies omap_gpio_init() to make use of omap_gpio_chip_init() and omap_gpio_mod_init(). omap_gpio_mod_init() does the module init by clearing the status register and initializing the GPIO control register. omap_gpio_chip_init() initializes the chip request, free, get, set and other function pointers and sets the gpio irq handler. This is only to reorganize the code so that the "omap gpio platform driver implementation patch" looks cleaner and better to review. Signed-off-by: Charulatha V Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 234 +++++++++++++++++++++++----------------------- 1 file changed, 118 insertions(+), 116 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index e0e2fa725269..48bccf2001eb 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -190,14 +190,12 @@ struct gpio_bank { u32 suspend_wakeup; u32 saved_wakeup; #endif -#ifdef CONFIG_ARCH_OMAP2PLUS u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; u32 saved_datain; u32 saved_fallingdetect; u32 saved_risingdetect; -#endif u32 level_mask; u32 toggle_mask; spinlock_t lock; @@ -1718,10 +1716,125 @@ static void __init omap_gpio_show_rev(void) */ static struct lock_class_key gpio_lock_class; +static void omap_gpio_mod_init(struct gpio_bank *bank, int id) +{ + if (cpu_class_is_omap2()) { + if (cpu_is_omap44xx()) { + __raw_writel(0xffffffff, bank->base + + OMAP4_GPIO_IRQSTATUSCLR0); + __raw_writel(0x00000000, bank->base + + OMAP4_GPIO_DEBOUNCENABLE); + /* Initialize interface clk ungated, module enabled */ + __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); + } else if (cpu_is_omap34xx()) { + __raw_writel(0x00000000, bank->base + + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(0xffffffff, bank->base + + OMAP24XX_GPIO_IRQSTATUS1); + __raw_writel(0x00000000, bank->base + + OMAP24XX_GPIO_DEBOUNCE_EN); + + /* Initialize interface clk ungated, module enabled */ + __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); + } else if (cpu_is_omap24xx()) { + static const u32 non_wakeup_gpios[] = { + 0xe203ffc0, 0x08700040 + }; + if (id < ARRAY_SIZE(non_wakeup_gpios)) + bank->non_wakeup_gpios = non_wakeup_gpios[id]; + } + } else if (cpu_class_is_omap1()) { + if (bank_is_mpuio(bank)) + __raw_writew(0xffff, bank->base + + OMAP_MPUIO_GPIO_MASKIT); + if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { + __raw_writew(0xffff, bank->base + + OMAP1510_GPIO_INT_MASK); + __raw_writew(0x0000, bank->base + + OMAP1510_GPIO_INT_STATUS); + } + if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { + __raw_writew(0x0000, bank->base + + OMAP1610_GPIO_IRQENABLE1); + __raw_writew(0xffff, bank->base + + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + + OMAP1610_GPIO_SYSCONFIG); + + /* + * Enable system clock for GPIO module. + * The CAM_CLK_CTRL *is* really the right place. + */ + omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, + ULPD_CAM_CLK_CTRL); + } + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + + OMAP7XX_GPIO_INT_STATUS); + } + } +} + +static void __init omap_gpio_chip_init(struct gpio_bank *bank) +{ + int j, bank_width = 16; + static int gpio; + + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) + bank_width = 32; /* 7xx has 32-bit GPIOs */ + + if ((bank->method == METHOD_GPIO_24XX) || + (bank->method == METHOD_GPIO_44XX)) + bank_width = 32; + + bank->mod_usage = 0; + /* + * REVISIT eventually switch from OMAP-specific gpio structs + * over to the generic ones + */ + bank->chip.request = omap_gpio_request; + bank->chip.free = omap_gpio_free; + bank->chip.direction_input = gpio_input; + bank->chip.get = gpio_get; + bank->chip.direction_output = gpio_output; + bank->chip.set_debounce = gpio_debounce; + bank->chip.set = gpio_set; + bank->chip.to_irq = gpio_2irq; + if (bank_is_mpuio(bank)) { + bank->chip.label = "mpuio"; +#ifdef CONFIG_ARCH_OMAP16XX + bank->chip.dev = &omap_mpuio_device.dev; +#endif + bank->chip.base = OMAP_MPUIO(0); + } else { + bank->chip.label = "gpio"; + bank->chip.base = gpio; + gpio += bank_width; + } + bank->chip.ngpio = bank_width; + + gpiochip_add(&bank->chip); + + for (j = bank->virtual_irq_start; + j < bank->virtual_irq_start + bank_width; j++) { + lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); + set_irq_chip_data(j, bank); + if (bank_is_mpuio(bank)) + set_irq_chip(j, &mpuio_irq_chip); + else + set_irq_chip(j, &gpio_irq_chip); + set_irq_handler(j, handle_simple_irq); + set_irq_flags(j, IRQF_VALID); + } + set_irq_chained_handler(bank->irq, gpio_irq_handler); + set_irq_data(bank->irq, bank); +} + static int __init _omap_gpio_init(void) { int i; - int gpio = 0; struct gpio_bank *bank; int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ char clk_name[11]; @@ -1828,7 +1941,6 @@ static int __init _omap_gpio_init(void) } #endif for (i = 0; i < gpio_bank_count; i++) { - int j, gpio_count = 16; bank = &gpio_bank[i]; spin_lock_init(&bank->lock); @@ -1840,107 +1952,8 @@ static int __init _omap_gpio_init(void) continue; } - if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); - if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { - __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); - __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); - } - if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { - __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); - __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); - __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); - } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { - __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - - gpio_count = 32; /* 7xx has 32-bit GPIOs */ - } - -#ifdef CONFIG_ARCH_OMAP2PLUS - if ((bank->method == METHOD_GPIO_24XX) || - (bank->method == METHOD_GPIO_44XX)) { - static const u32 non_wakeup_gpios[] = { - 0xe203ffc0, 0x08700040 - }; - - if (cpu_is_omap44xx()) { - __raw_writel(0xffffffff, bank->base + - OMAP4_GPIO_IRQSTATUSCLR0); - __raw_writew(0x0015, bank->base + - OMAP4_GPIO_SYSCONFIG); - __raw_writel(0x00000000, bank->base + - OMAP4_GPIO_DEBOUNCENABLE); - /* - * Initialize interface clock ungated, - * module enabled - */ - __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); - } else { - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(0xffffffff, bank->base + - OMAP24XX_GPIO_IRQSTATUS1); - __raw_writew(0x0015, bank->base + - OMAP24XX_GPIO_SYSCONFIG); - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_DEBOUNCE_EN); - - /* - * Initialize interface clock ungated, - * module enabled - */ - __raw_writel(0, bank->base + - OMAP24XX_GPIO_CTRL); - } - if (cpu_is_omap24xx() && - i < ARRAY_SIZE(non_wakeup_gpios)) - bank->non_wakeup_gpios = non_wakeup_gpios[i]; - gpio_count = 32; - } -#endif - - bank->mod_usage = 0; - /* REVISIT eventually switch from OMAP-specific gpio structs - * over to the generic ones - */ - bank->chip.request = omap_gpio_request; - bank->chip.free = omap_gpio_free; - bank->chip.direction_input = gpio_input; - bank->chip.get = gpio_get; - bank->chip.direction_output = gpio_output; - bank->chip.set_debounce = gpio_debounce; - bank->chip.set = gpio_set; - bank->chip.to_irq = gpio_2irq; - if (bank_is_mpuio(bank)) { - bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP16XX - bank->chip.dev = &omap_mpuio_device.dev; -#endif - bank->chip.base = OMAP_MPUIO(0); - } else { - bank->chip.label = "gpio"; - bank->chip.base = gpio; - gpio += gpio_count; - } - bank->chip.ngpio = gpio_count; - - gpiochip_add(&bank->chip); - - for (j = bank->virtual_irq_start; - j < bank->virtual_irq_start + gpio_count; j++) { - lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); - set_irq_chip_data(j, bank); - if (bank_is_mpuio(bank)) - set_irq_chip(j, &mpuio_irq_chip); - else - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_simple_irq); - set_irq_flags(j, IRQF_VALID); - } - set_irq_chained_handler(bank->irq, gpio_irq_handler); - set_irq_data(bank->irq, bank); + omap_gpio_mod_init(bank, i); + omap_gpio_chip_init(bank); if (cpu_is_omap34xx() || cpu_is_omap44xx()) { sprintf(clk_name, "gpio%d_dbck", i + 1); @@ -1950,17 +1963,6 @@ static int __init _omap_gpio_init(void) } } - /* Enable system clock for GPIO module. - * The CAM_CLK_CTRL *is* really the right place. */ - if (cpu_is_omap16xx()) - omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); - - /* Enable autoidle for the OCP interface */ - if (cpu_is_omap24xx()) - omap_writel(1 << 0, 0x48019010); - if (cpu_is_omap34xx()) - omap_writel(1 << 0, 0x48306814); - omap_gpio_show_rev(); return 0; -- cgit v1.2.2 From 9a748053f5f58a77cd71864f1d7b804175b0e47d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 7 Dec 2010 16:26:56 -0800 Subject: OMAP: GPIO: Make omap_gpio_show_rev bank specific Otherwise GPIO init on 16xx may try to access uninitialized GPIO bank as the MPUIO bank does not have a revision register. Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 48bccf2001eb..e4741905285b 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1694,16 +1694,16 @@ static struct clk * gpio5_fck; static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif -static void __init omap_gpio_show_rev(void) +static void __init omap_gpio_show_rev(struct gpio_bank *bank) { u32 rev; - if (cpu_is_omap16xx()) - rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); + if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO)) + rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION); else if (cpu_is_omap24xx() || cpu_is_omap34xx()) - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION); else if (cpu_is_omap44xx()) - rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); + rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION); else return; @@ -1963,7 +1963,7 @@ static int __init _omap_gpio_init(void) } } - omap_gpio_show_rev(); + omap_gpio_show_rev(bank); return 0; } -- cgit v1.2.2 From c95d10bc49d50a9bc0f63a6eae79bb2707dabfdc Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:56 -0800 Subject: OMAP15xx: GPIO: Introduce support for GPIO init Add support for handling OMAP15xx specific gpio_init by providing platform device data and doing device registration. Signed-off-by: Charulatha V Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/gpio15xx.c | 98 ++++++++++++++++++++++++++++++++++ arch/arm/plat-omap/gpio.c | 10 +--- arch/arm/plat-omap/include/plat/gpio.h | 18 +++++++ 3 files changed, 118 insertions(+), 8 deletions(-) create mode 100644 arch/arm/mach-omap1/gpio15xx.c (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c new file mode 100644 index 000000000000..dbd81688eada --- /dev/null +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -0,0 +1,98 @@ +/* + * OMAP15xx specific gpio init + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: + * Charulatha V + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE +#define OMAP1510_GPIO_BASE 0xFFFCE000 + +/* gpio1 */ +static struct __initdata resource omap15xx_mpu_gpio_resources[] = { + { + .start = OMAP1_MPUIO_VBASE, + .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_MPUIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { + .virtual_irq_start = IH_MPUIO_BASE, + .bank_type = METHOD_MPUIO, + .bank_width = 16, +}; + +static struct __initdata platform_device omap15xx_mpu_gpio = { + .name = "omap_gpio", + .id = 0, + .dev = { + .platform_data = &omap15xx_mpu_gpio_config, + }, + .num_resources = ARRAY_SIZE(omap15xx_mpu_gpio_resources), + .resource = omap15xx_mpu_gpio_resources, +}; + +/* gpio2 */ +static struct __initdata resource omap15xx_gpio_resources[] = { + { + .start = OMAP1510_GPIO_BASE, + .end = OMAP1510_GPIO_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_GPIO_BANK1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { + .virtual_irq_start = IH_GPIO_BASE, + .bank_type = METHOD_GPIO_1510, + .bank_width = 16, +}; + +static struct __initdata platform_device omap15xx_gpio = { + .name = "omap_gpio", + .id = 1, + .dev = { + .platform_data = &omap15xx_gpio_config, + }, + .num_resources = ARRAY_SIZE(omap15xx_gpio_resources), + .resource = omap15xx_gpio_resources, +}; + +/* + * omap15xx_gpio_init needs to be done before + * machine_init functions access gpio APIs. + * Hence omap15xx_gpio_init is a postcore_initcall. + */ +static int __init omap15xx_gpio_init(void) +{ + if (!cpu_is_omap15xx()) + return -EINVAL; + + platform_device_register(&omap15xx_mpu_gpio); + platform_device_register(&omap15xx_gpio); + + gpio_bank_count = 2; + return 0; +} +postcore_initcall(omap15xx_gpio_init); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index e4741905285b..2b0d90109828 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -205,13 +205,6 @@ struct gpio_bank { u32 dbck_enable_mask; }; -#define METHOD_MPUIO 0 -#define METHOD_GPIO_1510 1 -#define METHOD_GPIO_1610 2 -#define METHOD_GPIO_7XX 3 -#define METHOD_GPIO_24XX 5 -#define METHOD_GPIO_44XX 6 - #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, @@ -335,7 +328,8 @@ static struct gpio_bank gpio_bank_44xx[6] = { #endif static struct gpio_bank *gpio_bank; -static int gpio_bank_count; +/* TODO: Analyze removing gpio_bank_count usage from driver code */ +int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index de1c604962eb..5bef86d76a6a 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -27,6 +27,7 @@ #define __ASM_ARCH_OMAP_GPIO_H #include +#include #include #define OMAP1_MPUIO_BASE 0xfffb5000 @@ -71,6 +72,23 @@ IH_MPUIO_BASE + ((nr) & 0x0f) : \ IH_GPIO_BASE + (nr)) +#define METHOD_MPUIO 0 +#define METHOD_GPIO_1510 1 +#define METHOD_GPIO_1610 2 +#define METHOD_GPIO_7XX 3 +#define METHOD_GPIO_24XX 5 +#define METHOD_GPIO_44XX 6 + +struct omap_gpio_platform_data { + u16 virtual_irq_start; + int bank_type; + int bank_width; /* GPIO bank width */ + bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ +}; + +/* TODO: Analyze removing gpio_bank_count usage from driver code */ +extern int gpio_bank_count; + extern int omap_gpio_init(void); /* Call from board init only */ extern void omap2_gpio_prepare_for_idle(int power_state); extern void omap2_gpio_resume_after_idle(void); -- cgit v1.2.2 From 87fe6229c75a2ca1ebfa1e9e937cba2535e961a8 Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:56 -0800 Subject: OMAP16xx: GPIO: Introduce support for GPIO init Add support for handling OMAP16xx specific gpio_init by providing platform device data and doing device registration. Signed-off-by: Charulatha V Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/gpio16xx.c | 199 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 199 insertions(+) create mode 100644 arch/arm/mach-omap1/gpio16xx.c (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c new file mode 100644 index 000000000000..8d4d0a061b56 --- /dev/null +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -0,0 +1,199 @@ +/* + * OMAP16xx specific gpio init + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: + * Charulatha V + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#define OMAP1610_GPIO1_BASE 0xfffbe400 +#define OMAP1610_GPIO2_BASE 0xfffbec00 +#define OMAP1610_GPIO3_BASE 0xfffbb400 +#define OMAP1610_GPIO4_BASE 0xfffbbc00 +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE + +/* mpu gpio */ +static struct __initdata resource omap16xx_mpu_gpio_resources[] = { + { + .start = OMAP1_MPUIO_VBASE, + .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_MPUIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { + .virtual_irq_start = IH_MPUIO_BASE, + .bank_type = METHOD_MPUIO, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_mpu_gpio = { + .name = "omap_gpio", + .id = 0, + .dev = { + .platform_data = &omap16xx_mpu_gpio_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_mpu_gpio_resources), + .resource = omap16xx_mpu_gpio_resources, +}; + +/* gpio1 */ +static struct __initdata resource omap16xx_gpio1_resources[] = { + { + .start = OMAP1610_GPIO1_BASE, + .end = OMAP1610_GPIO1_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_GPIO_BANK1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { + .virtual_irq_start = IH_GPIO_BASE, + .bank_type = METHOD_GPIO_1610, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_gpio1 = { + .name = "omap_gpio", + .id = 1, + .dev = { + .platform_data = &omap16xx_gpio1_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_gpio1_resources), + .resource = omap16xx_gpio1_resources, +}; + +/* gpio2 */ +static struct __initdata resource omap16xx_gpio2_resources[] = { + { + .start = OMAP1610_GPIO2_BASE, + .end = OMAP1610_GPIO2_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_GPIO_BANK2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { + .virtual_irq_start = IH_GPIO_BASE + 16, + .bank_type = METHOD_GPIO_1610, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_gpio2 = { + .name = "omap_gpio", + .id = 2, + .dev = { + .platform_data = &omap16xx_gpio2_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_gpio2_resources), + .resource = omap16xx_gpio2_resources, +}; + +/* gpio3 */ +static struct __initdata resource omap16xx_gpio3_resources[] = { + { + .start = OMAP1610_GPIO3_BASE, + .end = OMAP1610_GPIO3_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_GPIO_BANK3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { + .virtual_irq_start = IH_GPIO_BASE + 32, + .bank_type = METHOD_GPIO_1610, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_gpio3 = { + .name = "omap_gpio", + .id = 3, + .dev = { + .platform_data = &omap16xx_gpio3_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_gpio3_resources), + .resource = omap16xx_gpio3_resources, +}; + +/* gpio4 */ +static struct __initdata resource omap16xx_gpio4_resources[] = { + { + .start = OMAP1610_GPIO4_BASE, + .end = OMAP1610_GPIO4_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_GPIO_BANK4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { + .virtual_irq_start = IH_GPIO_BASE + 48, + .bank_type = METHOD_GPIO_1610, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_gpio4 = { + .name = "omap_gpio", + .id = 4, + .dev = { + .platform_data = &omap16xx_gpio4_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_gpio4_resources), + .resource = omap16xx_gpio4_resources, +}; + +static struct __initdata platform_device * omap16xx_gpio_dev[] = { + &omap16xx_mpu_gpio, + &omap16xx_gpio1, + &omap16xx_gpio2, + &omap16xx_gpio3, + &omap16xx_gpio4, +}; + +/* + * omap16xx_gpio_init needs to be done before + * machine_init functions access gpio APIs. + * Hence omap16xx_gpio_init is a postcore_initcall. + */ +static int __init omap16xx_gpio_init(void) +{ + int i; + + if (!cpu_is_omap16xx()) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) + platform_device_register(omap16xx_gpio_dev[i]); + + gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev); + + return 0; +} +postcore_initcall(omap16xx_gpio_init); -- cgit v1.2.2 From 9d52342c27b7b43c4a7b24bac24ff7bee0b80e07 Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:56 -0800 Subject: OMAP7xx: GPIO: Introduce support for GPIO init Add support for handling OMAP7xx specific gpio_init by providing platform device data and doing device registration. Signed-off-by: Charulatha V Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/gpio7xx.c | 261 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 261 insertions(+) create mode 100644 arch/arm/mach-omap1/gpio7xx.c (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c new file mode 100644 index 000000000000..94bccd44181d --- /dev/null +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -0,0 +1,261 @@ +/* + * OMAP7xx specific gpio init + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: + * Charulatha V + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#define OMAP7XX_GPIO1_BASE 0xfffbc000 +#define OMAP7XX_GPIO2_BASE 0xfffbc800 +#define OMAP7XX_GPIO3_BASE 0xfffbd000 +#define OMAP7XX_GPIO4_BASE 0xfffbd800 +#define OMAP7XX_GPIO5_BASE 0xfffbe000 +#define OMAP7XX_GPIO6_BASE 0xfffbe800 +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE + +/* mpu gpio */ +static struct __initdata resource omap7xx_mpu_gpio_resources[] = { + { + .start = OMAP1_MPUIO_VBASE, + .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_MPUIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { + .virtual_irq_start = IH_MPUIO_BASE, + .bank_type = METHOD_MPUIO, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_mpu_gpio = { + .name = "omap_gpio", + .id = 0, + .dev = { + .platform_data = &omap7xx_mpu_gpio_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources), + .resource = omap7xx_mpu_gpio_resources, +}; + +/* gpio1 */ +static struct __initdata resource omap7xx_gpio1_resources[] = { + { + .start = OMAP7XX_GPIO1_BASE, + .end = OMAP7XX_GPIO1_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { + .virtual_irq_start = IH_GPIO_BASE, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio1 = { + .name = "omap_gpio", + .id = 1, + .dev = { + .platform_data = &omap7xx_gpio1_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio1_resources), + .resource = omap7xx_gpio1_resources, +}; + +/* gpio2 */ +static struct __initdata resource omap7xx_gpio2_resources[] = { + { + .start = OMAP7XX_GPIO2_BASE, + .end = OMAP7XX_GPIO2_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { + .virtual_irq_start = IH_GPIO_BASE + 32, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio2 = { + .name = "omap_gpio", + .id = 2, + .dev = { + .platform_data = &omap7xx_gpio2_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio2_resources), + .resource = omap7xx_gpio2_resources, +}; + +/* gpio3 */ +static struct __initdata resource omap7xx_gpio3_resources[] = { + { + .start = OMAP7XX_GPIO3_BASE, + .end = OMAP7XX_GPIO3_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { + .virtual_irq_start = IH_GPIO_BASE + 64, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio3 = { + .name = "omap_gpio", + .id = 3, + .dev = { + .platform_data = &omap7xx_gpio3_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio3_resources), + .resource = omap7xx_gpio3_resources, +}; + +/* gpio4 */ +static struct __initdata resource omap7xx_gpio4_resources[] = { + { + .start = OMAP7XX_GPIO4_BASE, + .end = OMAP7XX_GPIO4_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { + .virtual_irq_start = IH_GPIO_BASE + 96, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio4 = { + .name = "omap_gpio", + .id = 4, + .dev = { + .platform_data = &omap7xx_gpio4_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio4_resources), + .resource = omap7xx_gpio4_resources, +}; + +/* gpio5 */ +static struct __initdata resource omap7xx_gpio5_resources[] = { + { + .start = OMAP7XX_GPIO5_BASE, + .end = OMAP7XX_GPIO5_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { + .virtual_irq_start = IH_GPIO_BASE + 128, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio5 = { + .name = "omap_gpio", + .id = 5, + .dev = { + .platform_data = &omap7xx_gpio5_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio5_resources), + .resource = omap7xx_gpio5_resources, +}; + +/* gpio6 */ +static struct __initdata resource omap7xx_gpio6_resources[] = { + { + .start = OMAP7XX_GPIO6_BASE, + .end = OMAP7XX_GPIO6_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { + .virtual_irq_start = IH_GPIO_BASE + 160, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio6 = { + .name = "omap_gpio", + .id = 6, + .dev = { + .platform_data = &omap7xx_gpio6_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio6_resources), + .resource = omap7xx_gpio6_resources, +}; + +static struct __initdata platform_device * omap7xx_gpio_dev[] = { + &omap7xx_mpu_gpio, + &omap7xx_gpio1, + &omap7xx_gpio2, + &omap7xx_gpio3, + &omap7xx_gpio4, + &omap7xx_gpio5, + &omap7xx_gpio6, +}; + +/* + * omap7xx_gpio_init needs to be done before + * machine_init functions access gpio APIs. + * Hence omap7xx_gpio_init is a postcore_initcall. + */ +static int __init omap7xx_gpio_init(void) +{ + int i; + + if (!cpu_is_omap7xx()) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++) + platform_device_register(omap7xx_gpio_dev[i]); + + gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev); + + return 0; +} +postcore_initcall(omap7xx_gpio_init); -- cgit v1.2.2 From 59c348c38fbe85e6e86c711b9a38c37315008d9e Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:56 -0800 Subject: OMAP2420: hwmod data: Add GPIO Add GPIO hwmod data for OMAP2420 and add the required GPIO device attributes in the gpio header file Also remove "omap24xx.h" header file as it is not required anymore. Signed-off-by: Charulatha V Acked-by: Benoit Cousson Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 230 ++++++++++++++++++++++++++++- arch/arm/plat-omap/include/plat/gpio.h | 5 + 2 files changed, 234 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a1a3dd6303b4..d95342599793 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include "omap_hwmod_common_data.h" @@ -38,6 +38,10 @@ static struct omap_hwmod omap2420_iva_hwmod; static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; static struct omap_hwmod omap2420_wd_timer2_hwmod; +static struct omap_hwmod omap2420_gpio1_hwmod; +static struct omap_hwmod omap2420_gpio2_hwmod; +static struct omap_hwmod omap2420_gpio3_hwmod; +static struct omap_hwmod omap2420_gpio4_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = { @@ -557,6 +561,224 @@ static struct omap_hwmod omap2420_i2c2_hwmod = { .flags = HWMOD_16BIT_REG, }; +/* l4_wkup -> gpio1 */ +static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = { + { + .pa_start = 0x48018000, + .pa_end = 0x480181ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = { + .master = &omap2420_l4_wkup_hwmod, + .slave = &omap2420_gpio1_hwmod, + .clk = "gpios_ick", + .addr = omap2420_gpio1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_gpio1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio2 */ +static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = { + { + .pa_start = 0x4801a000, + .pa_end = 0x4801a1ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = { + .master = &omap2420_l4_wkup_hwmod, + .slave = &omap2420_gpio2_hwmod, + .clk = "gpios_ick", + .addr = omap2420_gpio2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_gpio2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio3 */ +static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = { + { + .pa_start = 0x4801c000, + .pa_end = 0x4801c1ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = { + .master = &omap2420_l4_wkup_hwmod, + .slave = &omap2420_gpio3_hwmod, + .clk = "gpios_ick", + .addr = omap2420_gpio3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_gpio3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio4 */ +static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = { + { + .pa_start = 0x4801e000, + .pa_end = 0x4801e1ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = { + .master = &omap2420_l4_wkup_hwmod, + .slave = &omap2420_gpio4_hwmod, + .clk = "gpios_ick", + .addr = omap2420_gpio4_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_gpio4_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gpio dev_attr */ +static struct omap_gpio_dev_attr gpio_dev_attr = { + .bank_width = 32, + .dbck_flag = false, +}; + +static struct omap_hwmod_class_sysconfig omap242x_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +/* + * 'gpio' class + * general purpose io module + */ +static struct omap_hwmod_class omap242x_gpio_hwmod_class = { + .name = "gpio", + .sysc = &omap242x_gpio_sysc, + .rev = 0, +}; + +/* gpio1 */ +static struct omap_hwmod_irq_info omap242x_gpio1_irqs[] = { + { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */ +}; + +static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { + &omap2420_l4_wkup__gpio1, +}; + +static struct omap_hwmod omap2420_gpio1_hwmod = { + .name = "gpio1", + .mpu_irqs = omap242x_gpio1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs), + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .slaves = omap2420_gpio1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves), + .class = &omap242x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* gpio2 */ +static struct omap_hwmod_irq_info omap242x_gpio2_irqs[] = { + { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */ +}; + +static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { + &omap2420_l4_wkup__gpio2, +}; + +static struct omap_hwmod omap2420_gpio2_hwmod = { + .name = "gpio2", + .mpu_irqs = omap242x_gpio2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs), + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .slaves = omap2420_gpio2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves), + .class = &omap242x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* gpio3 */ +static struct omap_hwmod_irq_info omap242x_gpio3_irqs[] = { + { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */ +}; + +static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { + &omap2420_l4_wkup__gpio3, +}; + +static struct omap_hwmod omap2420_gpio3_hwmod = { + .name = "gpio3", + .mpu_irqs = omap242x_gpio3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs), + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .slaves = omap2420_gpio3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves), + .class = &omap242x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* gpio4 */ +static struct omap_hwmod_irq_info omap242x_gpio4_irqs[] = { + { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */ +}; + +static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { + &omap2420_l4_wkup__gpio4, +}; + +static struct omap_hwmod omap2420_gpio4_hwmod = { + .name = "gpio4", + .mpu_irqs = omap242x_gpio4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs), + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .slaves = omap2420_gpio4_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves), + .class = &omap242x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, @@ -569,6 +791,12 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_uart3_hwmod, &omap2420_i2c1_hwmod, &omap2420_i2c2_hwmod, + + /* gpio class */ + &omap2420_gpio1_hwmod, + &omap2420_gpio2_hwmod, + &omap2420_gpio3_hwmod, + &omap2420_gpio4_hwmod, NULL, }; diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 5bef86d76a6a..24892a6707c4 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -79,6 +79,11 @@ #define METHOD_GPIO_24XX 5 #define METHOD_GPIO_44XX 6 +struct omap_gpio_dev_attr { + int bank_width; /* GPIO bank width */ + bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ +}; + struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; -- cgit v1.2.2 From aeac0e441045974757e901b46719980a98c270a5 Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:56 -0800 Subject: OMAP2430: hwmod data: Add GPIO Add GPIO hwmod data for OMAP2430 Also remove "omap24xx.h" header file as it is not required anymore. Signed-off-by: Charulatha V Acked-by: Benoit Cousson Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 280 ++++++++++++++++++++++++++++- 1 file changed, 279 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 7cf0d3ab2a4a..f68409e9fd3e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include "omap_hwmod_common_data.h" @@ -38,6 +38,11 @@ static struct omap_hwmod omap2430_iva_hwmod; static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; static struct omap_hwmod omap2430_wd_timer2_hwmod; +static struct omap_hwmod omap2430_gpio1_hwmod; +static struct omap_hwmod omap2430_gpio2_hwmod; +static struct omap_hwmod omap2430_gpio3_hwmod; +static struct omap_hwmod omap2430_gpio4_hwmod; +static struct omap_hwmod omap2430_gpio5_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { @@ -569,6 +574,272 @@ static struct omap_hwmod omap2430_i2c2_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; +/* l4_wkup -> gpio1 */ +static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = { + { + .pa_start = 0x4900C000, + .pa_end = 0x4900C1ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = { + .master = &omap2430_l4_wkup_hwmod, + .slave = &omap2430_gpio1_hwmod, + .clk = "gpios_ick", + .addr = omap2430_gpio1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_gpio1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio2 */ +static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = { + { + .pa_start = 0x4900E000, + .pa_end = 0x4900E1ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = { + .master = &omap2430_l4_wkup_hwmod, + .slave = &omap2430_gpio2_hwmod, + .clk = "gpios_ick", + .addr = omap2430_gpio2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_gpio2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio3 */ +static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = { + { + .pa_start = 0x49010000, + .pa_end = 0x490101ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = { + .master = &omap2430_l4_wkup_hwmod, + .slave = &omap2430_gpio3_hwmod, + .clk = "gpios_ick", + .addr = omap2430_gpio3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_gpio3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio4 */ +static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = { + { + .pa_start = 0x49012000, + .pa_end = 0x490121ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = { + .master = &omap2430_l4_wkup_hwmod, + .slave = &omap2430_gpio4_hwmod, + .clk = "gpios_ick", + .addr = omap2430_gpio4_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_gpio4_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> gpio5 */ +static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = { + { + .pa_start = 0x480B6000, + .pa_end = 0x480B61ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_gpio5_hwmod, + .clk = "gpio5_ick", + .addr = omap2430_gpio5_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_gpio5_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gpio dev_attr */ +static struct omap_gpio_dev_attr gpio_dev_attr = { + .bank_width = 32, + .dbck_flag = false, +}; + +static struct omap_hwmod_class_sysconfig omap243x_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +/* + * 'gpio' class + * general purpose io module + */ +static struct omap_hwmod_class omap243x_gpio_hwmod_class = { + .name = "gpio", + .sysc = &omap243x_gpio_sysc, + .rev = 0, +}; + +/* gpio1 */ +static struct omap_hwmod_irq_info omap243x_gpio1_irqs[] = { + { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */ +}; + +static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { + &omap2430_l4_wkup__gpio1, +}; + +static struct omap_hwmod omap2430_gpio1_hwmod = { + .name = "gpio1", + .mpu_irqs = omap243x_gpio1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs), + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT, + }, + }, + .slaves = omap2430_gpio1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves), + .class = &omap243x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* gpio2 */ +static struct omap_hwmod_irq_info omap243x_gpio2_irqs[] = { + { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */ +}; + +static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { + &omap2430_l4_wkup__gpio2, +}; + +static struct omap_hwmod omap2430_gpio2_hwmod = { + .name = "gpio2", + .mpu_irqs = omap243x_gpio2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs), + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .slaves = omap2430_gpio2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves), + .class = &omap243x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* gpio3 */ +static struct omap_hwmod_irq_info omap243x_gpio3_irqs[] = { + { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */ +}; + +static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { + &omap2430_l4_wkup__gpio3, +}; + +static struct omap_hwmod omap2430_gpio3_hwmod = { + .name = "gpio3", + .mpu_irqs = omap243x_gpio3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs), + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .slaves = omap2430_gpio3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves), + .class = &omap243x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* gpio4 */ +static struct omap_hwmod_irq_info omap243x_gpio4_irqs[] = { + { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */ +}; + +static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { + &omap2430_l4_wkup__gpio4, +}; + +static struct omap_hwmod omap2430_gpio4_hwmod = { + .name = "gpio4", + .mpu_irqs = omap243x_gpio4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs), + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .slaves = omap2430_gpio4_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves), + .class = &omap243x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* gpio5 */ +static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = { + { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */ +}; + +static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { + &omap2430_l4_core__gpio5, +}; + +static struct omap_hwmod omap2430_gpio5_hwmod = { + .name = "gpio5", + .mpu_irqs = omap243x_gpio5_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs), + .main_clk = "gpio5_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 2, + .module_bit = OMAP2430_EN_GPIO5_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT, + }, + }, + .slaves = omap2430_gpio5_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves), + .class = &omap243x_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, @@ -581,6 +852,13 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_uart3_hwmod, &omap2430_i2c1_hwmod, &omap2430_i2c2_hwmod, + + /* gpio class */ + &omap2430_gpio1_hwmod, + &omap2430_gpio2_hwmod, + &omap2430_gpio3_hwmod, + &omap2430_gpio4_hwmod, + &omap2430_gpio5_hwmod, NULL, }; -- cgit v1.2.2 From 70034d38fbfd0f98a49367d36aa72f776a9e663a Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:57 -0800 Subject: OMAP3: hwmod data: Add GPIO Add GPIO hwmod data for OMAP3 Also remove "omap34xx.h" header file as it is not required anymore. Signed-off-by: Charulatha V Signed-off-by: Rajendra Nayak Acked-by: Benoit Cousson Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 361 ++++++++++++++++++++++++++++- 1 file changed, 360 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index a8bed843079c..2687be10d7aa 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include "omap_hwmod_common_data.h" @@ -45,6 +45,12 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod; static struct omap_hwmod omap3xxx_i2c1_hwmod; static struct omap_hwmod omap3xxx_i2c2_hwmod; static struct omap_hwmod omap3xxx_i2c3_hwmod; +static struct omap_hwmod omap3xxx_gpio1_hwmod; +static struct omap_hwmod omap3xxx_gpio2_hwmod; +static struct omap_hwmod omap3xxx_gpio3_hwmod; +static struct omap_hwmod omap3xxx_gpio4_hwmod; +static struct omap_hwmod omap3xxx_gpio5_hwmod; +static struct omap_hwmod omap3xxx_gpio6_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { @@ -739,6 +745,351 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; +/* l4_wkup -> gpio1 */ +static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = { + { + .pa_start = 0x48310000, + .pa_end = 0x483101ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_gpio1_hwmod, + .addr = omap3xxx_gpio1_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_gpio1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio2 */ +static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = { + { + .pa_start = 0x49050000, + .pa_end = 0x490501ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio2_hwmod, + .addr = omap3xxx_gpio2_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_gpio2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio3 */ +static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = { + { + .pa_start = 0x49052000, + .pa_end = 0x490521ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio3_hwmod, + .addr = omap3xxx_gpio3_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_gpio3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio4 */ +static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = { + { + .pa_start = 0x49054000, + .pa_end = 0x490541ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio4_hwmod, + .addr = omap3xxx_gpio4_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_gpio4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio5 */ +static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = { + { + .pa_start = 0x49056000, + .pa_end = 0x490561ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio5_hwmod, + .addr = omap3xxx_gpio5_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_gpio5_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio6 */ +static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = { + { + .pa_start = 0x49058000, + .pa_end = 0x490581ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio6_hwmod, + .addr = omap3xxx_gpio6_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_gpio6_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'gpio' class + * general purpose io module + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = { + .name = "gpio", + .sysc = &omap3xxx_gpio_sysc, + .rev = 1, +}; + +/* gpio_dev_attr*/ +static struct omap_gpio_dev_attr gpio_dev_attr = { + .bank_width = 32, + .dbck_flag = true, +}; + +/* gpio1 */ +static struct omap_hwmod_irq_info omap3xxx_gpio1_irqs[] = { + { .irq = 29 }, /* INT_34XX_GPIO_BANK1 */ +}; + +static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { + { .role = "dbclk", .clk = "gpio1_dbck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { + &omap3xxx_l4_wkup__gpio1, +}; + +static struct omap_hwmod omap3xxx_gpio1_hwmod = { + .name = "gpio1", + .mpu_irqs = omap3xxx_gpio1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs), + .main_clk = "gpio1_ick", + .opt_clks = gpio1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPIO1_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT, + }, + }, + .slaves = omap3xxx_gpio1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves), + .class = &omap3xxx_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* gpio2 */ +static struct omap_hwmod_irq_info omap3xxx_gpio2_irqs[] = { + { .irq = 30 }, /* INT_34XX_GPIO_BANK2 */ +}; + +static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { + { .role = "dbclk", .clk = "gpio2_dbck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { + &omap3xxx_l4_per__gpio2, +}; + +static struct omap_hwmod omap3xxx_gpio2_hwmod = { + .name = "gpio2", + .mpu_irqs = omap3xxx_gpio2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs), + .main_clk = "gpio2_ick", + .opt_clks = gpio2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPIO2_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT, + }, + }, + .slaves = omap3xxx_gpio2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves), + .class = &omap3xxx_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* gpio3 */ +static struct omap_hwmod_irq_info omap3xxx_gpio3_irqs[] = { + { .irq = 31 }, /* INT_34XX_GPIO_BANK3 */ +}; + +static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { + { .role = "dbclk", .clk = "gpio3_dbck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { + &omap3xxx_l4_per__gpio3, +}; + +static struct omap_hwmod omap3xxx_gpio3_hwmod = { + .name = "gpio3", + .mpu_irqs = omap3xxx_gpio3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs), + .main_clk = "gpio3_ick", + .opt_clks = gpio3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPIO3_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT, + }, + }, + .slaves = omap3xxx_gpio3_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves), + .class = &omap3xxx_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* gpio4 */ +static struct omap_hwmod_irq_info omap3xxx_gpio4_irqs[] = { + { .irq = 32 }, /* INT_34XX_GPIO_BANK4 */ +}; + +static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { + { .role = "dbclk", .clk = "gpio4_dbck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { + &omap3xxx_l4_per__gpio4, +}; + +static struct omap_hwmod omap3xxx_gpio4_hwmod = { + .name = "gpio4", + .mpu_irqs = omap3xxx_gpio4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs), + .main_clk = "gpio4_ick", + .opt_clks = gpio4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPIO4_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT, + }, + }, + .slaves = omap3xxx_gpio4_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves), + .class = &omap3xxx_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* gpio5 */ +static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = { + { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */ +}; + +static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { + { .role = "dbclk", .clk = "gpio5_dbck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = { + &omap3xxx_l4_per__gpio5, +}; + +static struct omap_hwmod omap3xxx_gpio5_hwmod = { + .name = "gpio5", + .mpu_irqs = omap3xxx_gpio5_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs), + .main_clk = "gpio5_ick", + .opt_clks = gpio5_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPIO5_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT, + }, + }, + .slaves = omap3xxx_gpio5_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves), + .class = &omap3xxx_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* gpio6 */ +static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = { + { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */ +}; + +static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { + { .role = "dbclk", .clk = "gpio6_dbck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = { + &omap3xxx_l4_per__gpio6, +}; + +static struct omap_hwmod omap3xxx_gpio6_hwmod = { + .name = "gpio6", + .mpu_irqs = omap3xxx_gpio6_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs), + .main_clk = "gpio6_ick", + .opt_clks = gpio6_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPIO6_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT, + }, + }, + .slaves = omap3xxx_gpio6_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves), + .class = &omap3xxx_gpio_hwmod_class, + .dev_attr = &gpio_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, @@ -754,6 +1105,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, &omap3xxx_i2c3_hwmod, + + /* gpio class */ + &omap3xxx_gpio1_hwmod, + &omap3xxx_gpio2_hwmod, + &omap3xxx_gpio3_hwmod, + &omap3xxx_gpio4_hwmod, + &omap3xxx_gpio5_hwmod, + &omap3xxx_gpio6_hwmod, NULL, }; -- cgit v1.2.2 From 9780a9cfa7b1f913d5f7099290e77b381a8b01d5 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 7 Dec 2010 16:26:57 -0800 Subject: OMAP4: hwmod data: Add GPIO Add GPIO hwmod data for OMAP4 Signed-off-by: Benoit Cousson Signed-off-by: Charulatha V Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 341 +++++++++++++++++++++++++++++ 1 file changed, 341 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0d5c6eb7e4c1..d258936410fb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -22,6 +22,7 @@ #include #include +#include #include "omap_hwmod_common_data.h" @@ -1043,6 +1044,338 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'gpio' class + * general purpose io module + */ + +static struct omap_hwmod_class_sysconfig omap44xx_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0114, + .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_gpio_hwmod_class = { + .name = "gpio", + .sysc = &omap44xx_gpio_sysc, + .rev = 2, +}; + +/* gpio dev_attr */ +static struct omap_gpio_dev_attr gpio_dev_attr = { + .bank_width = 32, + .dbck_flag = true, +}; + +/* gpio1 */ +static struct omap_hwmod omap44xx_gpio1_hwmod; +static struct omap_hwmod_irq_info omap44xx_gpio1_irqs[] = { + { .irq = 29 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = { + { + .pa_start = 0x4a310000, + .pa_end = 0x4a3101ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> gpio1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_gpio1_hwmod, + .addr = omap44xx_gpio1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_gpio1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gpio1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_gpio1_slaves[] = { + &omap44xx_l4_wkup__gpio1, +}; + +static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { + { .role = "dbclk", .clk = "sys_32k_ck" }, +}; + +static struct omap_hwmod omap44xx_gpio1_hwmod = { + .name = "gpio1", + .class = &omap44xx_gpio_hwmod_class, + .mpu_irqs = omap44xx_gpio1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio1_irqs), + .main_clk = "gpio1_ick", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL, + }, + }, + .opt_clks = gpio1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), + .dev_attr = &gpio_dev_attr, + .slaves = omap44xx_gpio1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* gpio2 */ +static struct omap_hwmod omap44xx_gpio2_hwmod; +static struct omap_hwmod_irq_info omap44xx_gpio2_irqs[] = { + { .irq = 30 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = { + { + .pa_start = 0x48055000, + .pa_end = 0x480551ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> gpio2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio2_hwmod, + .addr = omap44xx_gpio2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_gpio2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gpio2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_gpio2_slaves[] = { + &omap44xx_l4_per__gpio2, +}; + +static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { + { .role = "dbclk", .clk = "sys_32k_ck" }, +}; + +static struct omap_hwmod omap44xx_gpio2_hwmod = { + .name = "gpio2", + .class = &omap44xx_gpio_hwmod_class, + .mpu_irqs = omap44xx_gpio2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio2_irqs), + .main_clk = "gpio2_ick", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL, + }, + }, + .opt_clks = gpio2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), + .dev_attr = &gpio_dev_attr, + .slaves = omap44xx_gpio2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* gpio3 */ +static struct omap_hwmod omap44xx_gpio3_hwmod; +static struct omap_hwmod_irq_info omap44xx_gpio3_irqs[] = { + { .irq = 31 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = { + { + .pa_start = 0x48057000, + .pa_end = 0x480571ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> gpio3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio3_hwmod, + .addr = omap44xx_gpio3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_gpio3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gpio3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_gpio3_slaves[] = { + &omap44xx_l4_per__gpio3, +}; + +static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { + { .role = "dbclk", .clk = "sys_32k_ck" }, +}; + +static struct omap_hwmod omap44xx_gpio3_hwmod = { + .name = "gpio3", + .class = &omap44xx_gpio_hwmod_class, + .mpu_irqs = omap44xx_gpio3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio3_irqs), + .main_clk = "gpio3_ick", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL, + }, + }, + .opt_clks = gpio3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), + .dev_attr = &gpio_dev_attr, + .slaves = omap44xx_gpio3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* gpio4 */ +static struct omap_hwmod omap44xx_gpio4_hwmod; +static struct omap_hwmod_irq_info omap44xx_gpio4_irqs[] = { + { .irq = 32 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = { + { + .pa_start = 0x48059000, + .pa_end = 0x480591ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> gpio4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio4_hwmod, + .addr = omap44xx_gpio4_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_gpio4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gpio4 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_gpio4_slaves[] = { + &omap44xx_l4_per__gpio4, +}; + +static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { + { .role = "dbclk", .clk = "sys_32k_ck" }, +}; + +static struct omap_hwmod omap44xx_gpio4_hwmod = { + .name = "gpio4", + .class = &omap44xx_gpio_hwmod_class, + .mpu_irqs = omap44xx_gpio4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio4_irqs), + .main_clk = "gpio4_ick", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL, + }, + }, + .opt_clks = gpio4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), + .dev_attr = &gpio_dev_attr, + .slaves = omap44xx_gpio4_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* gpio5 */ +static struct omap_hwmod omap44xx_gpio5_hwmod; +static struct omap_hwmod_irq_info omap44xx_gpio5_irqs[] = { + { .irq = 33 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = { + { + .pa_start = 0x4805b000, + .pa_end = 0x4805b1ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> gpio5 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio5_hwmod, + .addr = omap44xx_gpio5_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_gpio5_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gpio5 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_gpio5_slaves[] = { + &omap44xx_l4_per__gpio5, +}; + +static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { + { .role = "dbclk", .clk = "sys_32k_ck" }, +}; + +static struct omap_hwmod omap44xx_gpio5_hwmod = { + .name = "gpio5", + .class = &omap44xx_gpio_hwmod_class, + .mpu_irqs = omap44xx_gpio5_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio5_irqs), + .main_clk = "gpio5_ick", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL, + }, + }, + .opt_clks = gpio5_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), + .dev_attr = &gpio_dev_attr, + .slaves = omap44xx_gpio5_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* gpio6 */ +static struct omap_hwmod omap44xx_gpio6_hwmod; +static struct omap_hwmod_irq_info omap44xx_gpio6_irqs[] = { + { .irq = 34 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = { + { + .pa_start = 0x4805d000, + .pa_end = 0x4805d1ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> gpio6 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio6_hwmod, + .addr = omap44xx_gpio6_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_gpio6_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gpio6 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_gpio6_slaves[] = { + &omap44xx_l4_per__gpio6, +}; + +static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { + { .role = "dbclk", .clk = "sys_32k_ck" }, +}; + +static struct omap_hwmod omap44xx_gpio6_hwmod = { + .name = "gpio6", + .class = &omap44xx_gpio_hwmod_class, + .mpu_irqs = omap44xx_gpio6_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio6_irqs), + .main_clk = "gpio6_ick", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL, + }, + }, + .opt_clks = gpio6_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), + .dev_attr = &gpio_dev_attr, + .slaves = omap44xx_gpio6_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* dmm class */ &omap44xx_dmm_hwmod, @@ -1066,6 +1399,14 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* mpu_bus class */ &omap44xx_mpu_private_hwmod, + /* gpio class */ + &omap44xx_gpio1_hwmod, + &omap44xx_gpio2_hwmod, + &omap44xx_gpio3_hwmod, + &omap44xx_gpio4_hwmod, + &omap44xx_gpio5_hwmod, + &omap44xx_gpio6_hwmod, + /* mpu class */ &omap44xx_mpu_hwmod, /* wd_timer class */ -- cgit v1.2.2 From f547170fe721f145b7b7d6eb8b252e45f489dc4b Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:57 -0800 Subject: OMAP2+: GPIO: device registration Use omap_device_build() API to do platform_device_register of GPIO devices. For OMAP2+ chips, the device specific data defined in the centralized hwmod database will be used. gpio_init needs to be done before machine_init functions access gpio APIs. Hence gpio_init is made as a postcore_initcall. Signed-off-by: Charulatha V Acked-by: Benoit Cousson Reviewed-by: Basak, Partha Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpio.c | 104 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 arch/arm/mach-omap2/gpio.c (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c new file mode 100644 index 000000000000..413de18c1d2b --- /dev/null +++ b/arch/arm/mach-omap2/gpio.c @@ -0,0 +1,104 @@ +/* + * OMAP2+ specific gpio initialization + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: + * Charulatha V + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +#include +#include + +static struct omap_device_pm_latency omap_gpio_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) +{ + struct omap_device *od; + struct omap_gpio_platform_data *pdata; + struct omap_gpio_dev_attr *dev_attr; + char *name = "omap_gpio"; + int id; + + /* + * extract the device id from name field available in the + * hwmod database and use the same for constructing ids for + * gpio devices. + * CAUTION: Make sure the name in the hwmod database does + * not change. If changed, make corresponding change here + * or make use of static variable mechanism to handle this. + */ + sscanf(oh->name, "gpio%d", &id); + + pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL); + if (!pdata) { + pr_err("gpio%d: Memory allocation failed\n", id); + return -ENOMEM; + } + + dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr; + pdata->bank_width = dev_attr->bank_width; + pdata->dbck_flag = dev_attr->dbck_flag; + pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); + + switch (oh->class->rev) { + case 0: + case 1: + pdata->bank_type = METHOD_GPIO_24XX; + break; + case 2: + pdata->bank_type = METHOD_GPIO_44XX; + break; + default: + WARN(1, "Invalid gpio bank_type\n"); + kfree(pdata); + return -EINVAL; + } + + od = omap_device_build(name, id - 1, oh, pdata, + sizeof(*pdata), omap_gpio_latency, + ARRAY_SIZE(omap_gpio_latency), + false); + kfree(pdata); + + if (IS_ERR(od)) { + WARN(1, "Cant build omap_device for %s:%s.\n", + name, oh->name); + return PTR_ERR(od); + } + + gpio_bank_count++; + return 0; +} + +/* + * gpio_init needs to be done before + * machine_init functions access gpio APIs. + * Hence gpio_init is a postcore_initcall. + */ +static int __init omap2_gpio_init(void) +{ + return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, + NULL); +} +postcore_initcall(omap2_gpio_init); -- cgit v1.2.2 From 77640aabd7558e43b65bc1a0311be2dbb42c3ff8 Mon Sep 17 00:00:00 2001 From: "Varadarajan, Charulatha" Date: Tue, 7 Dec 2010 16:26:57 -0800 Subject: OMAP: GPIO: Implement GPIO as a platform device Implement GPIO as a platform device. GPIO APIs are used in machine_init functions. Hence it is required to complete GPIO probe before board_init. Therefore GPIO device register and driver register are implemented as postcore_initcalls. omap_gpio_init() does nothing now and this function would be removed in the next patch as it's usage is spread across most of the board files. Inorder to convert GPIO as platform device, modifications are required in clockxxxx_data.c file for OMAP1 so that device names can be used to obtain clock instead of getting clocks by name/NULL ptr. Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling or disabling the clocks, modify sysconfig settings and remove usage of clock FW APIs. Note 1: Converting GPIO driver to use runtime PM APIs is not done as a separate patch because GPIO clock names are different for various OMAPs and are different for some of the banks in the same CPU. This would need usage of cpu_is checks and bank id checks while using clock FW APIs in the gpio driver. Hence while making GPIO a platform driver framework, PM runtime APIs are used directly. Note 2: While implementing GPIO as a platform device, pm runtime APIs are used as mentioned above and modification is not done in gpio's prepare for idle/ resume after idle functions. This would be done in the next patch series and GPIO driver would be made to use dev_pm_ops instead of sysdev_class in that series only. Due to the above, the GPIO driver implicitly relies on CM_AUTOIDLE = 1 on its iclk for power management to work, since the driver never disables its iclk. This would be taken care in the next patch series (see Note 3 below). Refer to http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html for more details. Note 3: only pm_runtime_get_sync is called in gpio's probe() and pm_runtime_put* is never called. This is to make the implementation similar to the existing GPIO code. Another patch series would be sent to correct this. In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They are enabled/ disabled whenever required using clock framework APIs TODO: 1. Cleanup the GPIO driver. Use function pointers and register offest pointers instead of using hardcoded values 2. Remove all cpu_is_ checks and OMAP specific macros 3. Remove usage of gpio_bank array so that only instance specific information is used in driver code 4. Rename 'method'/ avoid it's usage 5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4 6. Modify gpio's prepare for idle/ resume after idle functions to use runtime pm implentation. Signed-off-by: Charulatha V Signed-off-by: Rajendra Nayak Reviewed-by: Basak, Partha Acked-by: Kevin Hilman [tony@atomide.com: updated for bank specific revision and updated boards] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Makefile | 6 + arch/arm/mach-omap1/board-ams-delta.c | 1 - arch/arm/mach-omap1/board-fsample.c | 1 - arch/arm/mach-omap1/board-h2.c | 1 - arch/arm/mach-omap1/board-h3.c | 1 - arch/arm/mach-omap1/board-htcherald.c | 2 - arch/arm/mach-omap1/board-innovator.c | 1 - arch/arm/mach-omap1/board-nokia770.c | 1 - arch/arm/mach-omap1/board-osk.c | 1 - arch/arm/mach-omap1/board-palmte.c | 1 - arch/arm/mach-omap1/board-palmz71.c | 1 - arch/arm/mach-omap1/board-perseus2.c | 1 - arch/arm/mach-omap1/board-sx1.c | 1 - arch/arm/mach-omap1/board-voiceblue.c | 1 - arch/arm/mach-omap1/clock_data.c | 4 +- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/board-2430sdp.c | 1 - arch/arm/mach-omap2/board-3430sdp.c | 1 - arch/arm/mach-omap2/board-3630sdp.c | 1 - arch/arm/mach-omap2/board-4430sdp.c | 1 - arch/arm/mach-omap2/board-am3517crane.c | 2 - arch/arm/mach-omap2/board-am3517evm.c | 1 - arch/arm/mach-omap2/board-apollon.c | 1 - arch/arm/mach-omap2/board-cm-t35.c | 1 - arch/arm/mach-omap2/board-cm-t3517.c | 1 - arch/arm/mach-omap2/board-devkit8000.c | 1 - arch/arm/mach-omap2/board-h4.c | 1 - arch/arm/mach-omap2/board-igep0020.c | 1 - arch/arm/mach-omap2/board-igep0030.c | 1 - arch/arm/mach-omap2/board-ldp.c | 1 - arch/arm/mach-omap2/board-n8x0.c | 1 - arch/arm/mach-omap2/board-omap3beagle.c | 1 - arch/arm/mach-omap2/board-omap3evm.c | 1 - arch/arm/mach-omap2/board-omap3logic.c | 1 - arch/arm/mach-omap2/board-omap3pandora.c | 1 - arch/arm/mach-omap2/board-omap3stalker.c | 1 - arch/arm/mach-omap2/board-omap3touchbook.c | 1 - arch/arm/mach-omap2/board-omap4panda.c | 1 - arch/arm/mach-omap2/board-overo.c | 1 - arch/arm/mach-omap2/board-rx51.c | 1 - arch/arm/mach-omap2/board-zoom.c | 1 - arch/arm/plat-omap/gpio.c | 413 +++++++---------------------- arch/arm/plat-omap/include/plat/gpio.h | 1 - 43 files changed, 107 insertions(+), 359 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index de3cc130ab8e..0b1c07ffa2f1 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -49,6 +49,12 @@ ifeq ($(CONFIG_ARCH_OMAP15XX),y) obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o endif +# GPIO +obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o +obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o +obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o +obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o + # LEDs support led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 9d97a72c5393..ce4d69ca15fe 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -141,7 +141,6 @@ static void __init ams_delta_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static struct map_desc ams_delta_io_desc[] __initdata = { diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 295ab6713670..0c3f396328bd 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -327,7 +327,6 @@ static void __init omap_fsample_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index dd35efdefcf7..082a73ca5564 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -374,7 +374,6 @@ static void __init h2_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static struct omap_usb_config h2_usb_config __initdata = { diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 78719198809e..d2cff5022fe5 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -437,7 +437,6 @@ static void __init h3_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static void __init h3_map_io(void) diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 071af3e47789..faa344f734dc 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -577,8 +577,6 @@ static void __init htcherald_init(void) printk(KERN_INFO "HTC Herald init.\n"); /* Do board initialization before we register all the devices */ - omap_gpio_init(); - omap_board_config = htcherald_config; omap_board_config_size = ARRAY_SIZE(htcherald_config); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 0feaa6731c7e..a051acdc526a 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -290,7 +290,6 @@ static void __init innovator_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1510_fpga_init_irq(); diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index aa8375b2a0a3..605495bbc583 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -246,7 +246,6 @@ static void __init omap_nokia770_init(void) platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); - omap_gpio_init(); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); hwa742_dev_init(); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 30bdbdb93636..d44e7172efc2 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -283,7 +283,6 @@ static void __init osk_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static struct omap_usb_config osk_usb_config __initdata = { diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index f32738b1eb6b..994dc6f50729 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -63,7 +63,6 @@ static void __init omap_palmte_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static const int palmte_keymap[] = { diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index d7a245cef9a4..2afac598baee 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -62,7 +62,6 @@ omap_palmz71_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static int palmz71_keymap[] = { diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 07660be4f228..69fda218fb45 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -295,7 +295,6 @@ static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index d25f59e5a773..463862c67819 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -409,7 +409,6 @@ static void __init omap_sx1_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } /*----------------------------------------*/ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index f5992c239bcd..789f5bac7359 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -158,7 +158,6 @@ static void __init voiceblue_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static void __init voiceblue_init(void) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index af54114b8f08..423d21d8c190 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -143,7 +143,7 @@ static struct arm_idlect1_clk armper_ck = { * activation. [ GPIO code for 1510 ] */ static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", + .name = "ick", .ops = &clkops_generic, .parent = &ck_dpll1, .flags = ENABLE_ON_INIT, @@ -684,7 +684,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), + CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310), CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ce7b1f017670..fbc87395a025 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \ - common.o + common.o gpio.o omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o hwmod-common = omap_hwmod.o \ diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index b527f8d187ad..0f14001c1641 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -145,7 +145,6 @@ static void __init omap_2430sdp_init_irq(void) omap_board_config_size = ARRAY_SIZE(sdp2430_config); omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); } static struct twl4030_gpio_platform_data sdp2430_gpio_data = { diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 4e3742c512b8..5cb23f3d4fc0 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -328,7 +328,6 @@ static void __init omap_3430sdp_init_irq(void) omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); omap_init_irq(); - omap_gpio_init(); } static int sdp3430_batt_table[] = { diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index bbcf580fa097..b23f401aa6b6 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -76,7 +76,6 @@ static void __init omap_sdp_init_irq(void) omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params, h8mbx00u0mer0em_sdrc_params); omap_init_irq(); - omap_gpio_init(); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 94d989bee8ad..8842ec5e51e3 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -223,7 +223,6 @@ static void __init omap_4430sdp_init_irq(void) omap2_gp_clockevent_set_gptimer(1); #endif gic_init_irq(); - omap_gpio_init(); } static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 13ead330e389..8ba404770e75 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -19,7 +19,6 @@ #include #include -#include #include #include @@ -50,7 +49,6 @@ static void __init am3517_crane_init_irq(void) omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); } static void __init am3517_crane_init(void) diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 07399505312b..df6900e8ad5a 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -392,7 +392,6 @@ static void __init am3517_evm_init_irq(void) omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); } static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 6ae777e08896..f51f4f1e07f7 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -280,7 +280,6 @@ static void __init omap_apollon_init_irq(void) omap_board_config_size = ARRAY_SIZE(apollon_config); omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); } static void __init apollon_led_init(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 63f764e2af3f..78b67fb790bf 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -686,7 +686,6 @@ static void __init cm_t35_init_irq(void) omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); - omap_gpio_init(); } static struct omap_board_mux board_mux[] __initdata = { diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 1dd303e9a267..7ee23dab84fe 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -250,7 +250,6 @@ static void __init cm_t3517_init_irq(void) omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); } static struct omap_board_mux board_mux[] __initdata = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 53ac762518bd..a30a7fce8cbf 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -450,7 +450,6 @@ static void __init devkit8000_init_irq(void) #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); #endif - omap_gpio_init(); } static void __init devkit8000_ads7846_init(void) diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 929993b4bf26..68e6f4c8e00a 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -293,7 +293,6 @@ static void __init omap_h4_init_irq(void) omap_board_config_size = ARRAY_SIZE(h4_config); omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); h4_init_flash(); } diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fe76b59b13ed..3bda186fe677 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -484,7 +484,6 @@ static void __init igep2_init_irq(void) { omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); omap_init_irq(); - omap_gpio_init(); } static struct twl4030_codec_audio_data igep2_audio_data = { diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 22b0b253e16b..c7c57cdf83d6 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -291,7 +291,6 @@ static void __init igep3_init_irq(void) { omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); omap_init_irq(); - omap_gpio_init(); } static struct twl4030_platform_data igep3_twl4030_pdata = { diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 3dab44e3eb42..d97e3caed7c0 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -294,7 +294,6 @@ static void __init omap_ldp_init_irq(void) omap_board_config_size = ARRAY_SIZE(ldp_config); omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); } static struct twl4030_usb_data ldp_usb_data = { diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e823c7042ab3..d8a489338e0c 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -641,7 +641,6 @@ static void __init n8x0_init_irq(void) { omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 14f42240ae79..a4131bef50fb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -490,7 +490,6 @@ static void __init omap3_beagle_init_irq(void) #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); #endif - omap_gpio_init(); } static struct platform_device *omap3_beagle_devices[] __initdata = { diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b04365c6bb10..5ca02202d608 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -625,7 +625,6 @@ static void __init omap3_evm_init_irq(void) omap_board_config_size = ARRAY_SIZE(omap3_evm_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); omap_init_irq(); - omap_gpio_init(); } static struct platform_device *omap3_evm_devices[] __initdata = { diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 5f7d2c1e7ef5..263294044c7e 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -199,7 +199,6 @@ static void __init omap3logic_init_irq(void) { omap2_init_common_hw(NULL, NULL); omap_init_irq(); - omap_gpio_init(); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 89ed1be2d62e..1031d7cadb3a 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -639,7 +639,6 @@ static void __init omap3pandora_init_irq(void) omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); - omap_gpio_init(); } static void pandora_wl1251_set_power(bool enable) diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index f25272125413..ea13e2aeeec5 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -589,7 +589,6 @@ static void __init omap3_stalker_init_irq(void) #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); #endif - omap_gpio_init(); } static struct platform_device *omap3_stalker_devices[] __initdata = { diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 41104bb8774c..2339964058cc 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -428,7 +428,6 @@ static void __init omap3_touchbook_init_irq(void) #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); #endif - omap_gpio_init(); } static struct platform_device *omap3_touchbook_devices[] __initdata = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 801f8146b00c..38f942beb121 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -79,7 +79,6 @@ static void __init omap4_panda_init_irq(void) { omap2_init_common_hw(NULL, NULL); gic_init_irq(); - omap_gpio_init(); } static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 7053bc0b46db..805b78393393 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -416,7 +416,6 @@ static void __init overo_init_irq(void) omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); - omap_gpio_init(); } static struct platform_device *overo_devices[] __initdata = { diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 36f2cf4efd57..1c3b0795c6e2 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -108,7 +108,6 @@ static void __init rx51_init_irq(void) sdrc_params = rx51_get_sdram_timings(); omap2_init_common_hw(sdrc_params, sdrc_params); omap_init_irq(); - omap_gpio_init(); } extern void __init rx51_peripherals_init(void); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 3da69e4102a4..abd864a50b4e 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -43,7 +43,6 @@ static void __init omap_zoom_init_irq(void) h8mbx00u0mer0em_sdrc_params); omap_init_irq(); - omap_gpio_init(); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 2b0d90109828..6f53dee98a91 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include #include @@ -32,7 +34,6 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE 0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -46,10 +47,6 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE 0xfffbe400 -#define OMAP1610_GPIO2_BASE 0xfffbec00 -#define OMAP1610_GPIO3_BASE 0xfffbb400 -#define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -71,12 +68,6 @@ /* * OMAP7XX specific GPIO registers */ -#define OMAP7XX_GPIO1_BASE 0xfffbc000 -#define OMAP7XX_GPIO2_BASE 0xfffbc800 -#define OMAP7XX_GPIO3_BASE 0xfffbd000 -#define OMAP7XX_GPIO4_BASE 0xfffbd800 -#define OMAP7XX_GPIO5_BASE 0xfffbe000 -#define OMAP7XX_GPIO6_BASE 0xfffbe800 #define OMAP7XX_GPIO_DATA_INPUT 0x00 #define OMAP7XX_GPIO_DATA_OUTPUT 0x04 #define OMAP7XX_GPIO_DIR_CONTROL 0x08 @@ -84,25 +75,10 @@ #define OMAP7XX_GPIO_INT_MASK 0x10 #define OMAP7XX_GPIO_INT_STATUS 0x14 -#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE - /* - * omap24xx specific GPIO registers + * omap2+ specific GPIO registers */ -#define OMAP242X_GPIO1_BASE 0x48018000 -#define OMAP242X_GPIO2_BASE 0x4801a000 -#define OMAP242X_GPIO3_BASE 0x4801c000 -#define OMAP242X_GPIO4_BASE 0x4801e000 - -#define OMAP243X_GPIO1_BASE 0x4900C000 -#define OMAP243X_GPIO2_BASE 0x4900E000 -#define OMAP243X_GPIO3_BASE 0x49010000 -#define OMAP243X_GPIO4_BASE 0x49012000 -#define OMAP243X_GPIO5_BASE 0x480B6000 - #define OMAP24XX_GPIO_REVISION 0x0000 -#define OMAP24XX_GPIO_SYSCONFIG 0x0010 -#define OMAP24XX_GPIO_SYSSTATUS 0x0014 #define OMAP24XX_GPIO_IRQSTATUS1 0x0018 #define OMAP24XX_GPIO_IRQSTATUS2 0x0028 #define OMAP24XX_GPIO_IRQENABLE2 0x002c @@ -126,7 +102,6 @@ #define OMAP24XX_GPIO_SETDATAOUT 0x0094 #define OMAP4_GPIO_REVISION 0x0000 -#define OMAP4_GPIO_SYSCONFIG 0x0010 #define OMAP4_GPIO_EOI 0x0020 #define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 #define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 @@ -138,7 +113,6 @@ #define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 #define OMAP4_GPIO_IRQWAKEN0 0x0044 #define OMAP4_GPIO_IRQWAKEN1 0x0048 -#define OMAP4_GPIO_SYSSTATUS 0x0114 #define OMAP4_GPIO_IRQENABLE1 0x011c #define OMAP4_GPIO_WAKE_EN 0x0120 #define OMAP4_GPIO_IRQSTATUS2 0x0128 @@ -159,26 +133,6 @@ #define OMAP4_GPIO_SETWKUENA 0x0184 #define OMAP4_GPIO_CLEARDATAOUT 0x0190 #define OMAP4_GPIO_SETDATAOUT 0x0194 -/* - * omap34xx specific GPIO registers - */ - -#define OMAP34XX_GPIO1_BASE 0x48310000 -#define OMAP34XX_GPIO2_BASE 0x49050000 -#define OMAP34XX_GPIO3_BASE 0x49052000 -#define OMAP34XX_GPIO4_BASE 0x49054000 -#define OMAP34XX_GPIO5_BASE 0x49056000 -#define OMAP34XX_GPIO6_BASE 0x49058000 - -/* - * OMAP44XX specific GPIO registers - */ -#define OMAP44XX_GPIO1_BASE 0x4a310000 -#define OMAP44XX_GPIO2_BASE 0x48055000 -#define OMAP44XX_GPIO3_BASE 0x48057000 -#define OMAP44XX_GPIO4_BASE 0x48059000 -#define OMAP44XX_GPIO5_BASE 0x4805B000 -#define OMAP44XX_GPIO6_BASE 0x4805D000 struct gpio_bank { unsigned long pbase; @@ -203,97 +157,12 @@ struct gpio_bank { struct clk *dbck; u32 mod_usage; u32 dbck_enable_mask; + struct device *dev; + bool dbck_flag; }; -#ifdef CONFIG_ARCH_OMAP16XX -static struct gpio_bank gpio_bank_1610[5] = { - { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, - METHOD_MPUIO }, - { OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_1610 }, - { OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, - METHOD_GPIO_1610 }, - { OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, - METHOD_GPIO_1610 }, - { OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, - METHOD_GPIO_1610 }, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP15XX -static struct gpio_bank gpio_bank_1510[2] = { - { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, - METHOD_MPUIO }, - { OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_1510 } -}; -#endif - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct gpio_bank gpio_bank_7xx[7] = { - { OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE, - METHOD_MPUIO }, - { OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, - METHOD_GPIO_7XX }, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP2 - -static struct gpio_bank gpio_bank_242x[4] = { - { OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_24XX }, - { OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, - METHOD_GPIO_24XX }, - { OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, - METHOD_GPIO_24XX }, - { OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, - METHOD_GPIO_24XX }, -}; - -static struct gpio_bank gpio_bank_243x[5] = { - { OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_24XX }, - { OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, - METHOD_GPIO_24XX }, - { OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, - METHOD_GPIO_24XX }, - { OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, - METHOD_GPIO_24XX }, - { OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, - METHOD_GPIO_24XX }, -}; - -#endif - #ifdef CONFIG_ARCH_OMAP3 -static struct gpio_bank gpio_bank_34xx[6] = { - { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, - METHOD_GPIO_24XX }, -}; - struct omap3_gpio_regs { - u32 sysconfig; u32 irqenable1; u32 irqenable2; u32 wake_en; @@ -309,25 +178,14 @@ struct omap3_gpio_regs { static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; #endif -#ifdef CONFIG_ARCH_OMAP4 -static struct gpio_bank gpio_bank_44xx[6] = { - { OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160, - METHOD_GPIO_44XX }, -}; +/* + * TODO: Cleanup gpio_bank usage as it is having information + * related to all instances of the device + */ +static struct gpio_bank *gpio_bank; -#endif +static int bank_width; -static struct gpio_bank *gpio_bank; /* TODO: Analyze removing gpio_bank_count usage from driver code */ int gpio_bank_count; @@ -634,6 +492,9 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, u32 val; u32 l; + if (!bank->dbck_flag) + return; + if (debounce < 32) debounce = 0x01; else if (debounce > 7936) @@ -643,7 +504,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, l = 1 << get_gpio_index(gpio); - if (cpu_is_omap44xx()) + if (bank->method == METHOD_GPIO_44XX) reg += OMAP4_GPIO_DEBOUNCINGTIME; else reg += OMAP24XX_GPIO_DEBOUNCE_VAL; @@ -651,7 +512,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, __raw_writel(debounce, reg); reg = bank->base; - if (cpu_is_omap44xx()) + if (bank->method == METHOD_GPIO_44XX) reg += OMAP4_GPIO_DEBOUNCENABLE; else reg += OMAP24XX_GPIO_DEBOUNCE_EN; @@ -660,12 +521,10 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, if (debounce) { val |= l; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - clk_enable(bank->dbck); + clk_enable(bank->dbck); } else { val &= ~l; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - clk_disable(bank->dbck); + clk_disable(bank->dbck); } bank->dbck_enable_mask = val; @@ -1537,7 +1396,8 @@ static struct platform_device omap_mpuio_device = { static inline void mpuio_init(void) { - platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]); + struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0)); + platform_set_drvdata(&omap_mpuio_device, bank); if (platform_driver_register(&omap_mpuio_driver) == 0) (void) platform_device_register(&omap_mpuio_device); @@ -1642,6 +1502,13 @@ static int gpio_debounce(struct gpio_chip *chip, unsigned offset, unsigned long flags; bank = container_of(chip, struct gpio_bank, chip); + + if (!bank->dbck) { + bank->dbck = clk_get(bank->dev, "dbclk"); + if (IS_ERR(bank->dbck)) + dev_err(bank->dev, "Could not get gpio dbck\n"); + } + spin_lock_irqsave(&bank->lock, flags); _set_gpio_debounce(bank, offset, debounce); spin_unlock_irqrestore(&bank->lock, flags); @@ -1670,24 +1537,6 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset) /*---------------------------------------------------------------------*/ -static int initialized; -#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2) -static struct clk * gpio_ick; -#endif - -#if defined(CONFIG_ARCH_OMAP2) -static struct clk * gpio_fck; -#endif - -#if defined(CONFIG_ARCH_OMAP2430) -static struct clk * gpio5_ick; -static struct clk * gpio5_fck; -#endif - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) -static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; -#endif - static void __init omap_gpio_show_rev(struct gpio_bank *bank) { u32 rev; @@ -1710,6 +1559,19 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank) */ static struct lock_class_key gpio_lock_class; +static inline int init_gpio_info(struct platform_device *pdev) +{ + /* TODO: Analyze removing gpio_bank_count usage from driver code */ + gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank), + GFP_KERNEL); + if (!gpio_bank) { + dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); + return -ENOMEM; + } + return 0; +} + +/* TODO: Cleanup cpu_is_* checks */ static void omap_gpio_mod_init(struct gpio_bank *bank, int id) { if (cpu_class_is_omap2()) { @@ -1773,16 +1635,9 @@ static void omap_gpio_mod_init(struct gpio_bank *bank, int id) static void __init omap_gpio_chip_init(struct gpio_bank *bank) { - int j, bank_width = 16; + int j; static int gpio; - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) - bank_width = 32; /* 7xx has 32-bit GPIOs */ - - if ((bank->method == METHOD_GPIO_24XX) || - (bank->method == METHOD_GPIO_44XX)) - bank_width = 32; - bank->mod_usage = 0; /* * REVISIT eventually switch from OMAP-specific gpio structs @@ -1826,139 +1681,68 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank) set_irq_data(bank->irq, bank); } -static int __init _omap_gpio_init(void) +static int __devinit omap_gpio_probe(struct platform_device *pdev) { - int i; + static int gpio_init_done; + struct omap_gpio_platform_data *pdata; + struct resource *res; + int id; struct gpio_bank *bank; - int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ - char clk_name[11]; - initialized = 1; + if (!pdev->dev.platform_data) + return -EINVAL; -#if defined(CONFIG_ARCH_OMAP1) - if (cpu_is_omap15xx()) { - gpio_ick = clk_get(NULL, "arm_gpio_ck"); - if (IS_ERR(gpio_ick)) - printk("Could not get arm_gpio_ck\n"); - else - clk_enable(gpio_ick); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) - if (cpu_class_is_omap2()) { - gpio_ick = clk_get(NULL, "gpios_ick"); - if (IS_ERR(gpio_ick)) - printk("Could not get gpios_ick\n"); - else - clk_enable(gpio_ick); - gpio_fck = clk_get(NULL, "gpios_fck"); - if (IS_ERR(gpio_fck)) - printk("Could not get gpios_fck\n"); - else - clk_enable(gpio_fck); + pdata = pdev->dev.platform_data; - /* - * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK - */ -#if defined(CONFIG_ARCH_OMAP2430) - if (cpu_is_omap2430()) { - gpio5_ick = clk_get(NULL, "gpio5_ick"); - if (IS_ERR(gpio5_ick)) - printk("Could not get gpio5_ick\n"); - else - clk_enable(gpio5_ick); - gpio5_fck = clk_get(NULL, "gpio5_fck"); - if (IS_ERR(gpio5_fck)) - printk("Could not get gpio5_fck\n"); - else - clk_enable(gpio5_fck); - } -#endif - } -#endif + if (!gpio_init_done) { + int ret; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - for (i = 0; i < OMAP34XX_NR_GPIOS; i++) { - sprintf(clk_name, "gpio%d_ick", i + 1); - gpio_iclks[i] = clk_get(NULL, clk_name); - if (IS_ERR(gpio_iclks[i])) - printk(KERN_ERR "Could not get %s\n", clk_name); - else - clk_enable(gpio_iclks[i]); - } + ret = init_gpio_info(pdev); + if (ret) + return ret; } -#endif + id = pdev->id; + bank = &gpio_bank[id]; -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap15xx()) { - gpio_bank_count = 2; - gpio_bank = gpio_bank_1510; - bank_size = SZ_2K; - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap16xx()) { - gpio_bank_count = 5; - gpio_bank = gpio_bank_1610; - bank_size = SZ_2K; - } -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (cpu_is_omap7xx()) { - gpio_bank_count = 7; - gpio_bank = gpio_bank_7xx; - bank_size = SZ_2K; - } -#endif -#ifdef CONFIG_ARCH_OMAP2 - if (cpu_is_omap242x()) { - gpio_bank_count = 4; - gpio_bank = gpio_bank_242x; - } - if (cpu_is_omap243x()) { - gpio_bank_count = 5; - gpio_bank = gpio_bank_243x; - } -#endif -#ifdef CONFIG_ARCH_OMAP3 - if (cpu_is_omap34xx()) { - gpio_bank_count = OMAP34XX_NR_GPIOS; - gpio_bank = gpio_bank_34xx; - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (cpu_is_omap44xx()) { - gpio_bank_count = OMAP34XX_NR_GPIOS; - gpio_bank = gpio_bank_44xx; + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id); + return -ENODEV; } -#endif - for (i = 0; i < gpio_bank_count; i++) { - bank = &gpio_bank[i]; - spin_lock_init(&bank->lock); + bank->irq = res->start; + bank->virtual_irq_start = pdata->virtual_irq_start; + bank->method = pdata->bank_type; + bank->dev = &pdev->dev; + bank->dbck_flag = pdata->dbck_flag; + bank_width = pdata->bank_width; - /* Static mapping, never released */ - bank->base = ioremap(bank->pbase, bank_size); - if (!bank->base) { - printk(KERN_ERR "Could not ioremap gpio bank%i\n", i); - continue; - } + spin_lock_init(&bank->lock); - omap_gpio_mod_init(bank, i); - omap_gpio_chip_init(bank); + /* Static mapping, never released */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id); + return -ENODEV; + } - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - sprintf(clk_name, "gpio%d_dbck", i + 1); - bank->dbck = clk_get(NULL, clk_name); - if (IS_ERR(bank->dbck)) - printk(KERN_ERR "Could not get %s\n", clk_name); - } + bank->base = ioremap(res->start, resource_size(res)); + if (!bank->base) { + dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id); + return -ENOMEM; } + pm_runtime_enable(bank->dev); + pm_runtime_get_sync(bank->dev); + + omap_gpio_mod_init(bank, id); + omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); + if (!gpio_init_done) + gpio_init_done = 1; + return 0; } @@ -2252,8 +2036,6 @@ void omap_gpio_save_context(void) /* saving banks from 2-6 only since GPIO1 is in WKUP */ for (i = 1; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; - gpio_context[i].sysconfig = - __raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG); gpio_context[i].irqenable1 = __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); gpio_context[i].irqenable2 = @@ -2284,8 +2066,6 @@ void omap_gpio_restore_context(void) for (i = 1; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; - __raw_writel(gpio_context[i].sysconfig, - bank->base + OMAP24XX_GPIO_SYSCONFIG); __raw_writel(gpio_context[i].irqenable1, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(gpio_context[i].irqenable2, @@ -2310,25 +2090,28 @@ void omap_gpio_restore_context(void) } #endif +static struct platform_driver omap_gpio_driver = { + .probe = omap_gpio_probe, + .driver = { + .name = "omap_gpio", + }, +}; + /* - * This may get called early from board specific init - * for boards that have interrupts routed via FPGA. + * gpio driver register needs to be done before + * machine_init functions access gpio APIs. + * Hence omap_gpio_drv_reg() is a postcore_initcall. */ -int __init omap_gpio_init(void) +static int __init omap_gpio_drv_reg(void) { - if (!initialized) - return _omap_gpio_init(); - else - return 0; + return platform_driver_register(&omap_gpio_driver); } +postcore_initcall(omap_gpio_drv_reg); static int __init omap_gpio_sysinit(void) { int ret = 0; - if (!initialized) - ret = _omap_gpio_init(); - mpuio_init(); #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 24892a6707c4..5f118ff0d3eb 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -94,7 +94,6 @@ struct omap_gpio_platform_data { /* TODO: Analyze removing gpio_bank_count usage from driver code */ extern int gpio_bank_count; -extern int omap_gpio_init(void); /* Call from board init only */ extern void omap2_gpio_prepare_for_idle(int power_state); extern void omap2_gpio_resume_after_idle(void); extern void omap_set_gpio_debounce(int gpio, int enable); -- cgit v1.2.2 From 5de62b86d2f5cf3459cb02ecb7a4530787bbd898 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 7 Dec 2010 16:26:58 -0800 Subject: omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx We need to divide the 15xx/16xx offset by 2 for 7xx. Use bank->stride for that. This allows us to get rid of the duplicate defines for the MPUIO registers. Note that this will cause omap-keypad.c driver to not work on 7xx. However, the right fix there is to move over to matrix_keypad instead as suggested by Cory Maccarrone and Janusz Krzysztofik . Cc: Cory Maccarrone Acked-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/gpio15xx.c | 1 + arch/arm/mach-omap1/gpio16xx.c | 1 + arch/arm/mach-omap1/gpio7xx.c | 1 + arch/arm/plat-omap/gpio.c | 33 +++++++++++++++++++-------------- arch/arm/plat-omap/include/plat/gpio.h | 22 +++++----------------- 5 files changed, 27 insertions(+), 31 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index dbd81688eada..04c4b04cf54e 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -38,6 +38,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, + .bank_stride = 1, }; static struct __initdata platform_device omap15xx_mpu_gpio = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 8d4d0a061b56..5dd0d4c82b24 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -41,6 +41,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, + .bank_stride = 1, }; static struct __initdata platform_device omap16xx_mpu_gpio = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 94bccd44181d..1204c8b871af 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -43,6 +43,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 32, + .bank_stride = 2, }; static struct __initdata platform_device omap7xx_mpu_gpio = { diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 6f53dee98a91..8d493b992e70 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -159,6 +159,7 @@ struct gpio_bank { u32 dbck_enable_mask; struct device *dev; bool dbck_flag; + int stride; }; #ifdef CONFIG_ARCH_OMAP3 @@ -267,7 +268,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; + reg += OMAP_MPUIO_IO_CNTL / bank->stride; break; #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -315,7 +316,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT; + reg += OMAP_MPUIO_OUTPUT / bank->stride; l = __raw_readl(reg); if (enable) l |= 1 << gpio; @@ -387,7 +388,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_INPUT_LATCH; + reg += OMAP_MPUIO_INPUT_LATCH / bank->stride; break; #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -433,7 +434,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT; + reg += OMAP_MPUIO_OUTPUT / bank->stride; break; #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -620,7 +621,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) switch (bank->method) { case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE; + reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; break; #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: @@ -654,7 +655,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE; + reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; l = __raw_readl(reg); if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; @@ -840,7 +841,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT; + reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; mask = 0xffff; inv = 1; break; @@ -897,7 +898,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT; + reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); @@ -1147,7 +1148,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) bank = get_irq_data(irq); #ifdef CONFIG_ARCH_OMAP1 if (bank->method == METHOD_MPUIO) - isr_reg = bank->base + OMAP_MPUIO_GPIO_INT; + isr_reg = bank->base + + OMAP_MPUIO_GPIO_INT / bank->stride; #endif #ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) @@ -1345,7 +1347,8 @@ static int omap_mpuio_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; unsigned long flags; spin_lock_irqsave(&bank->lock, flags); @@ -1360,7 +1363,8 @@ static int omap_mpuio_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; unsigned long flags; spin_lock_irqsave(&bank->lock, flags); @@ -1440,7 +1444,7 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) switch (bank->method) { case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; + reg += OMAP_MPUIO_IO_CNTL / bank->stride; break; case METHOD_GPIO_1510: reg += OMAP1510_GPIO_DIR_CONTROL; @@ -1601,8 +1605,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank, int id) } } else if (cpu_class_is_omap1()) { if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base - + OMAP_MPUIO_GPIO_MASKIT); + __raw_writew(0xffff, bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); @@ -1716,6 +1720,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) bank->method = pdata->bank_type; bank->dev = &pdev->dev; bank->dbck_flag = pdata->dbck_flag; + bank->stride = pdata->bank_stride; bank_width = pdata->bank_width; spin_lock_init(&bank->lock); diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 5f118ff0d3eb..41ff2f8943f0 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -32,22 +32,10 @@ #define OMAP1_MPUIO_BASE 0xfffb5000 -#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)) - -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x02 -#define OMAP_MPUIO_IO_CNTL 0x04 -#define OMAP_MPUIO_KBR_LATCH 0x08 -#define OMAP_MPUIO_KBC 0x0a -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c -#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e -#define OMAP_MPUIO_KBD_INT 0x10 -#define OMAP_MPUIO_GPIO_INT 0x12 -#define OMAP_MPUIO_KBD_MASKIT 0x14 -#define OMAP_MPUIO_GPIO_MASKIT 0x16 -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18 -#define OMAP_MPUIO_LATCH 0x1a -#else +/* + * These are the omap15xx/16xx offsets. The omap7xx offset are + * OMAP_MPUIO_ / 2 offsets below. + */ #define OMAP_MPUIO_INPUT_LATCH 0x00 #define OMAP_MPUIO_OUTPUT 0x04 #define OMAP_MPUIO_IO_CNTL 0x08 @@ -61,7 +49,6 @@ #define OMAP_MPUIO_GPIO_MASKIT 0x2c #define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 #define OMAP_MPUIO_LATCH 0x34 -#endif #define OMAP34XX_NR_GPIOS 6 @@ -88,6 +75,7 @@ struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; int bank_width; /* GPIO bank width */ + int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ }; -- cgit v1.2.2