From 28f65c11f2ffb3957259dece647a24f8ad2e241b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 9 Jun 2011 09:13:32 -0700 Subject: treewide: Convert uses of struct resource to resource_size(ptr) Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina --- arch/arm/common/scoop.c | 2 +- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-mv78xx0/pcie.c | 8 ++++---- arch/arm/mach-u300/core.c | 2 +- arch/arm/plat-mxc/pwm.c | 8 ++++---- arch/arm/plat-s5p/sysmmu.c | 6 +++--- arch/arm/plat-samsung/pm-check.c | 2 +- 7 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index c11af1e4bad3..a07b0e763a80 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -193,7 +193,7 @@ static int __devinit scoop_probe(struct platform_device *pdev) spin_lock_init(&devptr->scoop_lock); inf = pdev->dev.platform_data; - devptr->base = ioremap(mem->start, mem->end - mem->start + 1); + devptr->base = ioremap(mem->start, resource_size(mem)); if (!devptr->base) { ret = -ENOMEM; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3eb4538fceeb..14dd666850b0 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -525,7 +525,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) if (ARRAY_SIZE(lcdc_resources) > 2) { void __iomem *fb; struct resource *fb_res = &lcdc_resources[2]; - size_t fb_len = fb_res->end - fb_res->start + 1; + size_t fb_len = resource_size(fb_res); fb = ioremap(fb_res->start, fb_len); if (fb) { diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index a560439dcc3c..f27c7d2fa9f7 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -129,12 +129,12 @@ static void __init mv78xx0_pcie_preinit(void) struct pcie_port *pp = pcie_port + i; mv78xx0_setup_pcie_io_win(win++, pp->res[0].start, - pp->res[0].end - pp->res[0].start + 1, - pp->maj, pp->min); + resource_size(&pp->res[0]), + pp->maj, pp->min); mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start, - pp->res[1].end - pp->res[1].start + 1, - pp->maj, pp->min); + resource_size(&pp->res[1]), + pp->maj, pp->min); } } diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 513d6abec1f5..399c89f14dfb 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1791,7 +1791,7 @@ static void __init u300_assign_physmem(void) 0 == res->start) { res->start = curr_start; res->end += curr_start; - curr_start += (res->end - res->start + 1); + curr_start += resource_size(res); printk(KERN_INFO "core.c: Mapping RAM " \ "%#x-%#x to device %s:%s\n", diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 7a61ef8f471a..761c3c940a68 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -214,14 +214,14 @@ static int __devinit mxc_pwm_probe(struct platform_device *pdev) goto err_free_clk; } - r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + r = request_mem_region(r->start, resource_size(r), pdev->name); if (r == NULL) { dev_err(&pdev->dev, "failed to request memory resource\n"); ret = -EBUSY; goto err_free_clk; } - pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + pwm->mmio_base = ioremap(r->start, resource_size(r)); if (pwm->mmio_base == NULL) { dev_err(&pdev->dev, "failed to ioremap() registers\n"); ret = -ENODEV; @@ -236,7 +236,7 @@ static int __devinit mxc_pwm_probe(struct platform_device *pdev) return 0; err_free_mem: - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); err_free_clk: clk_put(pwm->clk); err_free: @@ -260,7 +260,7 @@ static int __devexit mxc_pwm_remove(struct platform_device *pdev) iounmap(pwm->mmio_base); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); clk_put(pwm->clk); diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index 54f5eddc921d..e1cbc728c775 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -232,8 +232,8 @@ static int s5p_sysmmu_probe(struct platform_device *pdev) goto err_res; } - mem = request_mem_region(res->start, - ((res->end) - (res->start)) + 1, pdev->name); + mem = request_mem_region(res->start, resource_size(res), + pdev->name); if (!mem) { dev_err(dev, "Failed to request the memory region of %s.\n", sysmmu_ips_name[i]); @@ -241,7 +241,7 @@ static int s5p_sysmmu_probe(struct platform_device *pdev) goto err_res; } - sysmmusfrs[i] = ioremap(res->start, res->end - res->start + 1); + sysmmusfrs[i] = ioremap(res->start, resource_size(res)); if (!sysmmusfrs[i]) { dev_err(dev, "Failed to ioremap() for %s.\n", sysmmu_ips_name[i]); diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 6b733fafe7cd..3cbd62666b1e 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -72,7 +72,7 @@ static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) static u32 *s3c_pm_countram(struct resource *res, u32 *val) { - u32 size = (u32)(res->end - res->start)+1; + u32 size = (u32)resource_size(res); size += CHECK_CHUNKSIZE-1; size /= CHECK_CHUNKSIZE; -- cgit v1.2.2 From 786b01a8c1db0c0decca55d660a2a3ebd7cfb26b Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Mon, 6 Jun 2011 18:57:07 +0000 Subject: cleanup regulator supply definitions in mach-omap2 to use REGULATOR_SUPPLY arrays. CC: Mark Brown CC: Mike Rapoport CC: Nishant Kamat CC: Steve Sakoman CC: Felipe Balbi CC: Santosh Shilimkar CC: peter.barada@logicpd.com Signed-off-by: Oleg Drokin Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 13 ++---- arch/arm/mach-omap2/board-cm-t35.c | 34 ++++++++------- arch/arm/mach-omap2/board-devkit8000.c | 28 +++++++------ arch/arm/mach-omap2/board-igep0020.c | 27 ++++++------ arch/arm/mach-omap2/board-ldp.c | 8 ++-- arch/arm/mach-omap2/board-omap3beagle.c | 25 +++++------ arch/arm/mach-omap2/board-omap3evm.c | 41 +++++++++--------- arch/arm/mach-omap2/board-omap3logic.c | 8 ++-- arch/arm/mach-omap2/board-omap3pandora.c | 63 +++++++++++++++------------- arch/arm/mach-omap2/board-omap3stalker.c | 25 +++++------ arch/arm/mach-omap2/board-omap3touchbook.c | 32 +++++++------- arch/arm/mach-omap2/board-omap4panda.c | 16 +++---- arch/arm/mach-omap2/board-overo.c | 26 ++++++------ arch/arm/mach-omap2/board-rx51-peripherals.c | 29 +++++++------ arch/arm/mach-omap2/board-zoom-peripherals.c | 42 +++++++++---------- 15 files changed, 218 insertions(+), 199 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 63de2d396e2d..39a80624177b 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -333,16 +333,11 @@ static struct omap2_hsmmc_info mmc[] = { }; static struct regulator_consumer_supply sdp4430_vaux_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.1", - }, + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; + static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.0", - }, + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; static int omap4_twl6030_hsmmc_late_init(struct device *dev) @@ -399,7 +394,7 @@ static struct regulator_init_data sdp4430_vaux1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, + .num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply), .consumer_supplies = sdp4430_vaux_supply, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 77456dec93ea..e7bf32de753d 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -337,19 +337,21 @@ static void __init cm_t35_init_display(void) } } -static struct regulator_consumer_supply cm_t35_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply cm_t35_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply cm_t35_vdac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; -static struct regulator_consumer_supply cm_t35_vdvi_supply = - REGULATOR_SUPPLY("vdvi", "omapdss"); +static struct regulator_consumer_supply cm_t35_vdvi_supply[] = { + REGULATOR_SUPPLY("vdvi", "omapdss"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data cm_t35_vmmc1 = { @@ -362,8 +364,8 @@ static struct regulator_init_data cm_t35_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply), + .consumer_supplies = cm_t35_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -377,8 +379,8 @@ static struct regulator_init_data cm_t35_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply), + .consumer_supplies = cm_t35_vsim_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -391,8 +393,8 @@ static struct regulator_init_data cm_t35_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vdac_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vdac_supply), + .consumer_supplies = cm_t35_vdac_supply, }; /* VPLL2 for digital video outputs */ @@ -406,8 +408,8 @@ static struct regulator_init_data cm_t35_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vdvi_supply), + .consumer_supplies = cm_t35_vdvi_supply, }; static struct twl4030_usb_data cm_t35_usb_data = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 34956ec83296..ead9c1d1940a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -130,13 +130,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) gpio_set_value_cansleep(dssdev->reset_gpio, 0); } -static struct regulator_consumer_supply devkit8000_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - +static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; /* ads7846 on SPI */ -static struct regulator_consumer_supply devkit8000_vio_supply = - REGULATOR_SUPPLY("vcc", "spi2.0"); +static struct regulator_consumer_supply devkit8000_vio_supply[] = { + REGULATOR_SUPPLY("vcc", "spi2.0"), +}; static struct panel_generic_dpi_data lcd_panel = { .name = "generic", @@ -186,8 +187,9 @@ static struct omap_dss_board_info devkit8000_dss_data = { .default_device = &devkit8000_lcd_device, }; -static struct regulator_consumer_supply devkit8000_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply devkit8000_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), @@ -284,8 +286,8 @@ static struct regulator_init_data devkit8000_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply), + .consumer_supplies = devkit8000_vmmc1_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -298,8 +300,8 @@ static struct regulator_init_data devkit8000_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vdda_dac_supply), + .consumer_supplies = devkit8000_vdda_dac_supply, }; /* VPLL1 for digital video outputs */ @@ -327,8 +329,8 @@ static struct regulator_init_data devkit8000_vio = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply), + .consumer_supplies = devkit8000_vio_supply, }; static struct twl4030_usb_data devkit8000_usb_data = { diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 0c1bfca3f731..84d284608333 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void) static inline void __init igep2_init_smsc911x(void) { } #endif -static struct regulator_consumer_supply igep_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply igep_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep_vmmc1 = { @@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply), + .consumer_supplies = igep_vmmc1_supply, }; -static struct regulator_consumer_supply igep_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); +static struct regulator_consumer_supply igep_vio_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; static struct regulator_init_data igep_vio = { .constraints = { @@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vio_supply), + .consumer_supplies = igep_vio_supply, }; -static struct regulator_consumer_supply igep_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply igep_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; static struct regulator_init_data igep_vmmc2 = { .constraints = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply), + .consumer_supplies = igep_vmmc2_supply, }; static struct fixed_voltage_config igep_vwlan = { diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f7d6038075f0..069bc9f0cf3c 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -213,8 +213,8 @@ static struct twl4030_madc_platform_data ldp_madc_data = { .irq_line = 1, }; -static struct regulator_consumer_supply ldp_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply ldp_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -228,8 +228,8 @@ static struct regulator_init_data ldp_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &ldp_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply), + .consumer_supplies = ldp_vmmc1_supply, }; /* ads7846 on SPI */ diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7f21d24bd437..4cf7c19ea0ef 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -210,8 +210,9 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static struct regulator_consumer_supply beagle_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply beagle_vdac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static struct regulator_consumer_supply beagle_vdvi_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), @@ -239,12 +240,12 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply beagle_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply beagle_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply beagle_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply beagle_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct gpio_led gpio_leds[]; @@ -336,8 +337,8 @@ static struct regulator_init_data beagle_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply), + .consumer_supplies = beagle_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -351,8 +352,8 @@ static struct regulator_init_data beagle_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply), + .consumer_supplies = beagle_vsim_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -365,8 +366,8 @@ static struct regulator_init_data beagle_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdac_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vdac_supply), + .consumer_supplies = beagle_vdac_supply, }; /* VPLL2 for digital video outputs */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b4d43464a303..fc7a23add5f6 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = { .default_device = &omap3_evm_lcd_device, }; -static struct regulator_consumer_supply omap3evm_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3evm_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3evm_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply), + .consumer_supplies = omap3evm_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply), + .consumer_supplies = omap3evm_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { @@ -449,8 +449,9 @@ static struct twl4030_codec_data omap3evm_codec_data = { .audio = &omap3evm_audio_data, }; -static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply omap3_evm_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_evm_vdac = { @@ -463,8 +464,8 @@ static struct regulator_init_data omap3_evm_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_evm_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vdda_dac_supply), + .consumer_supplies = omap3_evm_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ @@ -488,8 +489,9 @@ static struct regulator_init_data omap3_evm_vpll2 = { }; /* ads7846 on SPI */ -static struct regulator_consumer_supply omap3evm_vio_supply = - REGULATOR_SUPPLY("vcc", "spi1.0"); +static struct regulator_consumer_supply omap3evm_vio_supply[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; /* VIO for ads7846 */ static struct regulator_init_data omap3evm_vio = { @@ -502,8 +504,8 @@ static struct regulator_init_data omap3evm_vio = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply), + .consumer_supplies = omap3evm_vio_supply, }; #ifdef CONFIG_WL12XX_PLATFORM_DATA @@ -511,16 +513,17 @@ static struct regulator_init_data omap3evm_vio = { #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) -static struct regulator_consumer_supply omap3evm_vmmc2_supply = +static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +}; /* VMMC2 for driving the WL12xx module */ static struct regulator_init_data omap3evm_vmmc2 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply);, + .consumer_supplies = omap3evm_vmmc2_supply, }; static struct fixed_voltage_config omap3evm_vwlan = { diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 60d9be49dbab..ec18435bc5d5 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -55,8 +55,8 @@ #define OMAP3_TORPEDO_MMC_GPIO_CD 127 #define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129 -static struct regulator_consumer_supply omap3logic_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -71,8 +71,8 @@ static struct regulator_init_data omap3logic_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3logic_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3logic_vmmc1_supply), + .consumer_supplies = omap3logic_vmmc1_supply, }; static struct twl4030_gpio_platform_data omap3logic_gpio_data = { diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2a0bb4818cae..e95bba281a06 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -319,17 +319,21 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { .setup = omap3pandora_twl_gpio_setup, }; -static struct regulator_consumer_supply pandora_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply pandora_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; -static struct regulator_consumer_supply pandora_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply pandora_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1") +}; -static struct regulator_consumer_supply pandora_vmmc3_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"); +static struct regulator_consumer_supply pandora_vmmc3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), +}; -static struct regulator_consumer_supply pandora_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply pandora_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), @@ -337,11 +341,13 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; -static struct regulator_consumer_supply pandora_vcc_lcd_supply = - REGULATOR_SUPPLY("vcc", "display0"); +static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { + REGULATOR_SUPPLY("vcc", "display0"), +}; -static struct regulator_consumer_supply pandora_usb_phy_supply = - REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"); +static struct regulator_consumer_supply pandora_usb_phy_supply[] = { + REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"), +}; /* ads7846 on SPI and 2 nub controllers on I2C */ static struct regulator_consumer_supply pandora_vaux4_supplies[] = { @@ -350,8 +356,9 @@ static struct regulator_consumer_supply pandora_vaux4_supplies[] = { REGULATOR_SUPPLY("vcc", "3-0067"), }; -static struct regulator_consumer_supply pandora_adac_supply = - REGULATOR_SUPPLY("vcc", "soc-audio"); +static struct regulator_consumer_supply pandora_adac_supply[] = { + REGULATOR_SUPPLY("vcc", "soc-audio"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data pandora_vmmc1 = { @@ -364,8 +371,8 @@ static struct regulator_init_data pandora_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc1_supply), + .consumer_supplies = pandora_vmmc1_supply, }; /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ @@ -379,8 +386,8 @@ static struct regulator_init_data pandora_vmmc2 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc2_supply), + .consumer_supplies = pandora_vmmc2_supply, }; /* VDAC for DSS driving S-Video */ @@ -394,8 +401,8 @@ static struct regulator_init_data pandora_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vdda_dac_supply), + .consumer_supplies = pandora_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ @@ -424,8 +431,8 @@ static struct regulator_init_data pandora_vaux1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vcc_lcd_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vcc_lcd_supply), + .consumer_supplies = pandora_vcc_lcd_supply, }; /* VAUX2 for USB host PHY */ @@ -439,8 +446,8 @@ static struct regulator_init_data pandora_vaux2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_usb_phy_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_usb_phy_supply), + .consumer_supplies = pandora_usb_phy_supply, }; /* VAUX4 for ads7846 and nubs */ @@ -469,8 +476,8 @@ static struct regulator_init_data pandora_vsim = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_adac_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_adac_supply), + .consumer_supplies = pandora_adac_supply, }; /* Fixed regulator internal to Wifi module */ @@ -478,8 +485,8 @@ static struct regulator_init_data pandora_vmmc3 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc3_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), + .consumer_supplies = pandora_vmmc3_supply, }; static struct fixed_voltage_config pandora_vwlan = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 0c108a212ea2..99be540dbabe 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -206,12 +206,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = { .default_device = &omap3_stalker_dvi_device, }; -static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3stalker_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -224,8 +224,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), + .consumer_supplies = omap3stalker_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -238,8 +238,8 @@ static struct regulator_init_data omap3stalker_vsim = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), + .consumer_supplies = omap3stalker_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { @@ -403,8 +403,9 @@ static struct twl4030_codec_data omap3stalker_codec_data = { .audio = &omap3stalker_audio_data, }; -static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_stalker_vdac = { @@ -417,8 +418,8 @@ static struct regulator_init_data omap3_stalker_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vdda_dac_supply), + .consumer_supplies = omap3_stalker_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 5f649faf7377..ab5c37d9540b 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -114,12 +114,12 @@ static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct regulator_consumer_supply touchbook_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply touchbook_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply touchbook_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply touchbook_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct gpio_led gpio_leds[]; @@ -167,14 +167,18 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = { .setup = touchbook_twl_gpio_setup, }; -static struct regulator_consumer_supply touchbook_vdac_supply = { +static struct regulator_consumer_supply touchbook_vdac_supply[] = { +{ .supply = "vdac", .dev = &omap3_touchbook_lcd_device.dev, +}, }; -static struct regulator_consumer_supply touchbook_vdvi_supply = { +static struct regulator_consumer_supply touchbook_vdvi_supply[] = { +{ .supply = "vdvi", .dev = &omap3_touchbook_lcd_device.dev, +}, }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -188,8 +192,8 @@ static struct regulator_init_data touchbook_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply), + .consumer_supplies = touchbook_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -203,8 +207,8 @@ static struct regulator_init_data touchbook_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply), + .consumer_supplies = touchbook_vsim_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -217,8 +221,8 @@ static struct regulator_init_data touchbook_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdac_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vdac_supply), + .consumer_supplies = touchbook_vdac_supply, }; /* VPLL2 for digital video outputs */ @@ -232,8 +236,8 @@ static struct regulator_init_data touchbook_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vdvi_supply), + .consumer_supplies = touchbook_vdvi_supply, }; static struct twl4030_usb_data touchbook_usb_data = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 0cfe2005cb50..6d2372b98e46 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -183,23 +183,19 @@ static struct omap2_hsmmc_info mmc[] = { }; static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.0", - }, + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap4_panda_vmmc5_supply = { - .supply = "vmmc", - .dev_name = "omap_hsmmc.4", +static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"), }; static struct regulator_init_data panda_vmmc5 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap4_panda_vmmc5_supply, + .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply), + .consumer_supplies = omap4_panda_vmmc5_supply, }; static struct fixed_voltage_config panda_vwlan = { @@ -312,7 +308,7 @@ static struct regulator_init_data omap4_panda_vmmc = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, + .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc_supply), .consumer_supplies = omap4_panda_vmmc_supply, }; diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 175e1ab2b04d..30c7556d251e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -74,15 +74,16 @@ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) /* fixed regulator for ads7846 */ -static struct regulator_consumer_supply ads7846_supply = - REGULATOR_SUPPLY("vcc", "spi1.0"); +static struct regulator_consumer_supply ads7846_supply[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; static struct regulator_init_data vads7846_regulator = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &ads7846_supply, + .num_consumer_supplies = ARRAY_SIZE(ads7846_supply), + .consumer_supplies = ads7846_supply, }; static struct fixed_voltage_config vads7846 = { @@ -264,8 +265,9 @@ static struct omap_dss_board_info overo_dss_data = { .default_device = &overo_dvi_device, }; -static struct regulator_consumer_supply overo_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply overo_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), @@ -319,8 +321,8 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply overo_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply overo_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) @@ -447,8 +449,8 @@ static struct regulator_init_data overo_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply), + .consumer_supplies = overo_vmmc1_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -461,8 +463,8 @@ static struct regulator_init_data overo_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(overo_vdda_dac_supply), + .consumer_supplies = overo_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 990366726c58..5e559dda3cc3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -358,14 +358,17 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct regulator_consumer_supply rx51_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply rx51_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; -static struct regulator_consumer_supply rx51_vaux3_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply rx51_vaux3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; -static struct regulator_consumer_supply rx51_vsim_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); +static struct regulator_consumer_supply rx51_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { /* tlv320aic3x analog supplies */ @@ -452,8 +455,8 @@ static struct regulator_init_data rx51_vaux3_mmc = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vaux3_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), + .consumer_supplies = rx51_vaux3_supply, }; static struct regulator_init_data rx51_vaux4 = { @@ -479,8 +482,8 @@ static struct regulator_init_data rx51_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), + .consumer_supplies = rx51_vmmc1_supply, }; static struct regulator_init_data rx51_vmmc2 = { @@ -511,8 +514,8 @@ static struct regulator_init_data rx51_vsim = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), + .consumer_supplies = rx51_vsim_supply, }; static struct regulator_init_data rx51_vdac = { @@ -526,7 +529,7 @@ static struct regulator_init_data rx51_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, + .num_consumer_supplies = ARRAY_SIZE(rx51_vdac_supply), .consumer_supplies = rx51_vdac_supply, }; diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 118c6f53c5eb..cb012e16ba0f 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -105,21 +105,20 @@ static struct twl4030_keypad_data zoom_kp_twl4030_data = { .rep = 1, }; -static struct regulator_consumer_supply zoom_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply zoom_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply zoom_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply zoom_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply zoom_vmmc2_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply zoom_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; -static struct regulator_consumer_supply zoom_vmmc3_supply = { - .supply = "vmmc", - .dev_name = "omap_hsmmc.2", +static struct regulator_consumer_supply zoom_vmmc3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), }; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ @@ -133,8 +132,8 @@ static struct regulator_init_data zoom_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc1_supply), + .consumer_supplies = zoom_vmmc1_supply, }; /* VMMC2 for MMC2 card */ @@ -148,8 +147,8 @@ static struct regulator_init_data zoom_vmmc2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc2_supply), + .consumer_supplies = zoom_vmmc2_supply, }; /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ @@ -163,16 +162,16 @@ static struct regulator_init_data zoom_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vsim_supply), + .consumer_supplies = zoom_vsim_supply, }; static struct regulator_init_data zoom_vmmc3 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc3_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc3_supply), + .consumer_supplies = zoom_vmmc3_supply, }; static struct fixed_voltage_config zoom_vwlan = { @@ -232,8 +231,9 @@ static struct regulator_consumer_supply zoom_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; -static struct regulator_consumer_supply zoom_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply zoom_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static struct regulator_init_data zoom_vpll2 = { .constraints = { @@ -257,8 +257,8 @@ static struct regulator_init_data zoom_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vdda_dac_supply), + .consumer_supplies = zoom_vdda_dac_supply, }; static int zoom_twl_gpio_setup(struct device *dev, -- cgit v1.2.2 From fd4a0286cecd3b1e15771e02bc36bd8494a4a1d8 Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Mon, 6 Jun 2011 18:57:08 +0000 Subject: Remove old-style supply.dev assignments common in hsmmc init CC: Mark Brown CC: Mike Rapoport CC: Nishant Kamat CC: Steve Sakoman CC: Felipe Balbi Signed-off-by: Oleg Drokin Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t35.c | 4 ---- arch/arm/mach-omap2/board-ldp.c | 2 -- arch/arm/mach-omap2/board-omap3beagle.c | 4 ---- arch/arm/mach-omap2/board-omap3evm.c | 4 ---- arch/arm/mach-omap2/board-omap3logic.c | 2 -- arch/arm/mach-omap2/board-omap3stalker.c | 4 ---- arch/arm/mach-omap2/board-omap3touchbook.c | 4 ---- arch/arm/mach-omap2/board-overo.c | 2 -- arch/arm/mach-omap2/board-zoom-peripherals.c | 7 ------- 9 files changed, 33 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e7bf32de753d..ceb581e2b1da 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -483,10 +483,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - cm_t35_vmmc1_supply.dev = mmc[0].dev; - cm_t35_vsim_supply.dev = mmc[0].dev; - return 0; } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 069bc9f0cf3c..2d7e0aed605e 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -341,8 +341,6 @@ static void __init omap_ldp_init(void) ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - ldp_vmmc1_supply.dev = mmc[0].dev; } MACHINE_START(OMAP_LDP, "OMAP LDP board") diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 4cf7c19ea0ef..8ef0e19127ad 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -268,10 +268,6 @@ static int beagle_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - beagle_vmmc1_supply.dev = mmc[0].dev; - beagle_vsim_supply.dev = mmc[0].dev; - /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index fc7a23add5f6..e2202ddae667 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - omap3evm_vmmc1_supply.dev = mmc[0].dev; - omap3evm_vsim_supply.dev = mmc[0].dev; - /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index ec18435bc5d5..eaefb5916595 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -130,8 +130,6 @@ static void __init board_mmc_init(void) } omap2_hsmmc_init(board_mmc_info); - /* link regulators to MMC adapters */ - omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev; } static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 99be540dbabe..63d12a3df30a 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -321,10 +321,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - omap3stalker_vmmc1_supply.dev = mmc[0].dev; - omap3stalker_vsim_supply.dev = mmc[0].dev; - /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index ab5c37d9540b..c80e2c3a919b 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -137,10 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - touchbook_vmmc1_supply.dev = mmc[0].dev; - touchbook_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 30c7556d251e..031a9a68156c 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -417,8 +417,6 @@ static int overo_twl_gpio_setup(struct device *dev, { omap2_hsmmc_init(mmc); - overo_vmmc1_supply.dev = mmc[0].dev; - #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index cb012e16ba0f..8495f82fcbab 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -270,13 +270,6 @@ static int zoom_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters ... we "know" the - * regulators will be set up only *after* we return. - */ - zoom_vmmc1_supply.dev = mmc[0].dev; - zoom_vsim_supply.dev = mmc[0].dev; - zoom_vmmc2_supply.dev = mmc[1].dev; - ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable"); if (ret) -- cgit v1.2.2 From 1c5454eed85af71df9c01ab923e0c1b841b2e99b Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Wed, 15 Jun 2011 14:45:36 +1000 Subject: Change Ryan Mallon's email address across the kernel I no longer work at Bluewater Systems. Update my email address accordingly. I have deleted my email address from C files rather than change it. This was suggested by several people, since the commit from my new email address will cause scripts/get_maintainer.pl to function properly. I have not added the .mailmap entry as suggested by Joe because I think it is no longer necessary if I touch all the files which had my name in them. Signed-off-by: Ryan Mallon Cc: Andre Renaud Cc: H Hartley Sweeten Cc: Russell King Cc: Nicolas Ferre Cc: Andrew Victor Cc: David Woodhouse Cc: Anton Vorontsov Cc: Paul Mundt Cc: Liam Girdwood Cc: Mark Brown Cc: Alan Cox Cc: Joe Perches Cc: Jesper Juhl Cc: Andrew Morton Cc: trivial@kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Jesper Juhl Signed-off-by: Jiri Kosina --- arch/arm/mach-at91/board-snapper9260.c | 2 +- arch/arm/mach-ep93xx/dma-m2p.c | 2 +- arch/arm/mach-ep93xx/gpio.c | 2 +- arch/arm/mach-ep93xx/simone.c | 4 ++-- arch/arm/mach-ep93xx/snappercl15.c | 4 ++-- 5 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 3eb0a1153cc8..6010ce16b3cf 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -4,7 +4,7 @@ * Copyright (C) 2010 Bluewater System Ltd * * Author: Andre Renaud - * Author: Ryan Mallon + * Author: Ryan Mallon * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c index a696d354b1f8..1e036dd68cab 100644 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -5,7 +5,7 @@ * Copyright (C) 2006 Lennert Buytenhek * Copyright (C) 2006 Applied Data Systems * - * Copyright (C) 2009 Ryan Mallon + * Copyright (C) 2009 Ryan Mallon * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index 415dce37b88c..1a0f85225346 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -3,7 +3,7 @@ * * Generic EP93xx GPIO handling * - * Copyright (c) 2008 Ryan Mallon + * Copyright (c) 2008 Ryan Mallon * * Based on code originally from: * linux/arch/arm/mach-ep93xx/core.c diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index d96dc1c5da20..8392e95d7cea 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -2,7 +2,7 @@ * arch/arm/mach-ep93xx/simone.c * Simplemachines Sim.One support. * - * Copyright (C) 2010 Ryan Mallon + * Copyright (C) 2010 Ryan Mallon * * Based on the 2.6.24.7 support: * Copyright (C) 2009 Simplemachines @@ -65,7 +65,7 @@ static void __init simone_init_machine(void) } MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") -/* Maintainer: Ryan Mallon */ +/* Maintainer: Ryan Mallon */ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index ac601fe2b448..2e9c614757e4 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -3,7 +3,7 @@ * Bluewater Systems Snapper CL15 system module * * Copyright (C) 2009 Bluewater Systems Ltd - * Author: Ryan Mallon + * Author: Ryan Mallon * * NAND code adapted from driver by: * Andre Renaud @@ -162,7 +162,7 @@ static void __init snappercl15_init_machine(void) } MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") - /* Maintainer: Ryan Mallon */ + /* Maintainer: Ryan Mallon */ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, -- cgit v1.2.2 From 741e3a89dee8a17aa9373975d51f130a65e1683d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 17 May 2011 03:51:26 -0700 Subject: omap: Use separate init_irq functions to avoid cpu_is_omap tests early This allows us to remove cpu_is_omap calls from init_irq functions. There should not be any need for cpu_is_omap calls as at this point. During the timer init we only care about SoC generation, and not about subrevisions. The main reason for the patch is that we want to initialize only minimal omap specific code from the init_early call. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/mach-omap1/board-ams-delta.c | 2 +- arch/arm/mach-omap1/board-fsample.c | 2 +- arch/arm/mach-omap1/board-generic.c | 2 +- arch/arm/mach-omap1/board-h2.c | 2 +- arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-htcherald.c | 2 +- arch/arm/mach-omap1/board-innovator.c | 2 +- arch/arm/mach-omap1/board-nokia770.c | 2 +- arch/arm/mach-omap1/board-osk.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-perseus2.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 2 +- arch/arm/mach-omap1/board-voiceblue.c | 2 +- arch/arm/mach-omap1/irq.c | 2 +- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-3630sdp.c | 2 +- arch/arm/mach-omap2/board-am3517crane.c | 2 +- arch/arm/mach-omap2/board-am3517evm.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-cm-t35.c | 2 +- arch/arm/mach-omap2/board-cm-t3517.c | 2 +- arch/arm/mach-omap2/board-devkit8000.c | 2 +- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-igep0020.c | 4 ++-- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-n8x0.c | 6 +++--- arch/arm/mach-omap2/board-omap3beagle.c | 2 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3logic.c | 4 ++-- arch/arm/mach-omap2/board-omap3pandora.c | 2 +- arch/arm/mach-omap2/board-omap3stalker.c | 2 +- arch/arm/mach-omap2/board-omap3touchbook.c | 2 +- arch/arm/mach-omap2/board-overo.c | 2 +- arch/arm/mach-omap2/board-rm680.c | 2 +- arch/arm/mach-omap2/board-rx51.c | 2 +- arch/arm/mach-omap2/board-ti8168evm.c | 7 +------ arch/arm/mach-omap2/board-zoom.c | 4 ++-- arch/arm/mach-omap2/io.c | 17 +--------------- arch/arm/mach-omap2/irq.c | 32 ++++++++++++++++++++---------- arch/arm/mach-omap2/omap4-common.c | 10 +++++----- arch/arm/plat-omap/include/plat/irqs.h | 6 +++++- 45 files changed, 78 insertions(+), 84 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index de88c9297b68..17ed7575e035 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -138,7 +138,7 @@ void ams_delta_latch2_write(u16 mask, u16 value) static void __init ams_delta_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct map_desc ams_delta_io_desc[] __initdata = { diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 87f173d93557..eaff305fa47d 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -329,7 +329,7 @@ static void __init omap_fsample_init(void) static void __init omap_fsample_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 23f4ab9e2651..3fd6b40d2e92 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -31,7 +31,7 @@ static void __init omap_generic_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index ba3bd09c4754..8147b044de56 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -376,7 +376,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { static void __init h2_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config h2_usb_config __initdata = { diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ac48677672ee..1b448f641918 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -439,7 +439,7 @@ static void __init h3_init(void) static void __init h3_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static void __init h3_map_io(void) diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index ba05a51f9408..1bd4d8e2580c 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -605,7 +605,7 @@ static void __init htcherald_init_irq(void) { printk(KERN_INFO "htcherald_init_irq.\n"); omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } MACHINE_START(HERALD, "HTC Herald") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 2d9b8cbd7a14..5926b0cf0467 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -292,7 +292,7 @@ static void __init innovator_init_smc91x(void) static void __init innovator_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } #ifdef CONFIG_ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index cfd084926146..e3cf21d3c301 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -51,7 +51,7 @@ static void __init omap_nokia770_init_irq(void) omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int nokia770_keymap[] = { diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e68dfde1918e..1e7823d9df37 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -282,7 +282,7 @@ static void __init osk_init_cf(void) static void __init osk_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config osk_usb_config __initdata = { diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index c9d38f47845f..8b6a88184135 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -62,7 +62,7 @@ static void __init omap_palmte_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int palmte_keymap[] = { diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index f04f2d36e7d3..f2de43d8336f 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -266,7 +266,7 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { static void __init omap_palmtt_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config palmtt_usb_config __initdata = { diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 45f01d2c3a7a..6665d2da874b 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -61,7 +61,7 @@ static void __init omap_palmz71_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int palmz71_keymap[] = { diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 3c8ee8489458..7f019e55a149 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -297,7 +297,7 @@ static void __init omap_perseus2_init(void) static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 0ad781db4e66..24f0f7b85567 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -411,7 +411,7 @@ static void __init omap_sx1_init(void) static void __init omap_sx1_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /*----------------------------------------*/ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 65d24204937a..98826e2ae8ca 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -162,7 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = { static void __init voiceblue_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static void __init voiceblue_map_io(void) diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 5d3da7a63af3..e2b9c901ab67 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -175,7 +175,7 @@ static struct irq_chip omap_irq_chip = { .irq_set_wake = omap_wake_irq, }; -void __init omap_init_irq(void) +void __init omap1_init_irq(void) { int i, j; diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 5de6eac0a725..45cabc5283e4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -260,7 +260,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .reserve = omap_reserve, .map_io = omap_2430sdp_map_io, .init_early = omap_2430sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_2430sdp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5dac974be625..85b207f03865 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -804,7 +804,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_3430sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_3430sdp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index a5933cc15caa..2ec2d76087da 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -219,7 +219,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_sdp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 5e438a77cd72..0bed0a4c8338 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -104,7 +104,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_crane_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = am3517_crane_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 63af4171c043..0db0fb843010 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -494,7 +494,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_evm_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = am3517_evm_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index b124bdfb4239..93576c8a7157 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -354,7 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .reserve = omap_reserve, .map_io = omap_apollon_map_io, .init_early = omap_apollon_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_apollon_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 77456dec93ea..2940d640a661 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -646,7 +646,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t35_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = cm_t35_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index c3a9fd35034a..8f152228977c 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -304,7 +304,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t3517_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = cm_t3517_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 34956ec83296..00f6cb6e3bf9 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -438,7 +438,7 @@ static void __init devkit8000_init_early(void) static void __init devkit8000_init_irq(void) { - omap_init_irq(); + omap3_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); #endif diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 73e3c31e8508..ccd503ac24bd 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -70,7 +70,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") .reserve = omap_reserve, .map_io = omap_generic_map_io, .init_early = omap_generic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_generic_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index bac7933b8cbb..2e16d6cb3fe1 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -298,7 +298,7 @@ static void __init omap_h4_init_early(void) static void __init omap_h4_init_irq(void) { - omap_init_irq(); + omap2_init_irq(); } static struct at24_platform_data m24c01 = { diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 0c1bfca3f731..359b765483f5 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -703,7 +703,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = igep_init, .timer = &omap_timer, MACHINE_END @@ -713,7 +713,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = igep_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f7d6038075f0..a054f54b1714 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -350,7 +350,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_ldp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8d74318ed495..9c791a291898 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -699,7 +699,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, MACHINE_END @@ -709,7 +709,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, MACHINE_END @@ -719,7 +719,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7f21d24bd437..456005548718 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -486,7 +486,7 @@ static void __init omap3_beagle_init_early(void) static void __init omap3_beagle_init_irq(void) { - omap_init_irq(); + omap3_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); #endif diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b4d43464a303..79d5362cb260 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -740,7 +740,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_evm_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3_evm_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 60d9be49dbab..739fdfc12338 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -215,7 +215,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .boot_params = 0x80000100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3logic_init, .timer = &omap_timer, MACHINE_END @@ -224,7 +224,7 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .boot_params = 0x80000100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3logic_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2a0bb4818cae..7b4e1391ee80 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -642,7 +642,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3pandora_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3pandora_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 0c108a212ea2..01616260224b 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -494,7 +494,7 @@ static void __init omap3_stalker_init_early(void) static void __init omap3_stalker_init_irq(void) { - omap_init_irq(); + omap3_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); #endif diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 5f649faf7377..3cc553159557 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -371,7 +371,7 @@ static void __init omap3_touchbook_init_early(void) static void __init omap3_touchbook_init_irq(void) { - omap_init_irq(); + omap3_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); #endif diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 175e1ab2b04d..9c9f20cd9ce1 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -615,7 +615,7 @@ MACHINE_START(OVERO, "Gumstix Overo") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = overo_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = overo_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 42d10b12da3c..9c3d115b65d1 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -163,7 +163,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .reserve = omap_reserve, .map_io = rm680_map_io, .init_early = rm680_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = rm680_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index fec4cac8fa0a..ee35e4e8b09d 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -160,7 +160,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = rx51_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index 09fa7bfff8d6..713c20f20f3e 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -33,11 +33,6 @@ static void __init ti8168_init_early(void) omap2_init_common_devices(NULL, NULL); } -static void __init ti8168_evm_init_irq(void) -{ - omap_init_irq(); -} - static void __init ti8168_evm_init(void) { omap_serial_init(); @@ -56,7 +51,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") .boot_params = 0x80000100, .map_io = ti8168_evm_map_io, .init_early = ti8168_init_early, - .init_irq = ti8168_evm_init_irq, + .init_irq = ti816x_init_irq, .timer = &omap_timer, .init_machine = ti8168_evm_init, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4b133d75c935..97a3f0b21c33 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -137,7 +137,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, .timer = &omap_timer, MACHINE_END @@ -147,7 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 441e79d043a7..2ce1ce6fb4db 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -333,23 +333,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } +/* See irq.c, omap4-common.c and entry-macro.S */ void __iomem *omap_irq_base; -/* - * Initialize asm_irq_base for entry-macro.S - */ -static inline void omap_irq_base_init(void) -{ - if (cpu_is_omap24xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE); - else if (cpu_is_omap34xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE); - else if (cpu_is_omap44xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE); - else - pr_err("Could not initialize omap_irq_base\n"); -} - void __init omap2_init_common_infrastructure(void) { u8 postsetup_state; @@ -422,7 +408,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, _omap2_init_reprogram_sdrc(); } - omap_irq_base_init(); } /* diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3af2b7a1045e..3a12f7586a4c 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -141,25 +141,20 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) IRQ_NOREQUEST | IRQ_NOPROBE, 0); } -void __init omap_init_irq(void) +static void __init omap_init_irq(u32 base, int nr_irqs) { unsigned long nr_of_irqs = 0; unsigned int nr_banks = 0; int i, j; + omap_irq_base = ioremap(base, SZ_4K); + if (WARN_ON(!omap_irq_base)) + return; + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - unsigned long base = 0; struct omap_irq_bank *bank = irq_banks + i; - if (cpu_is_omap24xx()) - base = OMAP24XX_IC_BASE; - else if (cpu_is_omap34xx()) - base = OMAP34XX_IC_BASE; - - BUG_ON(!base); - - if (cpu_is_ti816x()) - bank->nr_irqs = 128; + bank->nr_irqs = nr_irqs; /* Static mapping, never released */ bank->base_reg = ioremap(base, SZ_4K); @@ -181,6 +176,21 @@ void __init omap_init_irq(void) nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); } +void __init omap2_init_irq(void) +{ + omap_init_irq(OMAP24XX_IC_BASE, 96); +} + +void __init omap3_init_irq(void) +{ + omap_init_irq(OMAP34XX_IC_BASE, 96); +} + +void __init ti816x_init_irq(void) +{ + omap_init_irq(OMAP34XX_IC_BASE, 128); +} + #ifdef CONFIG_ARCH_OMAP3 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 9ef8c29dd817..35ac3e5f6e94 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -19,6 +19,8 @@ #include #include +#include + #include #include @@ -31,17 +33,15 @@ void __iomem *gic_dist_base_addr; void __init gic_init_irq(void) { - void __iomem *gic_cpu_base; - /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); /* Static mapping, never released */ - gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!gic_cpu_base); + omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); + BUG_ON(!omap_irq_base); - gic_init(0, 29, gic_dist_base_addr, gic_cpu_base); + gic_init(0, 29, gic_dist_base_addr, omap_irq_base); } #ifdef CONFIG_CACHE_L2X0 diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 5a25098ea7ea..c88432005665 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,7 +428,11 @@ #define INTCPS_NR_IRQS 96 #ifndef __ASSEMBLY__ -extern void omap_init_irq(void); +extern void __iomem *omap_irq_base; +void omap1_init_irq(void); +void omap2_init_irq(void); +void omap3_init_irq(void); +void ti816x_init_irq(void); extern int omap_irq_pending(void); void omap_intc_save_context(void); void omap_intc_restore_context(void); -- cgit v1.2.2 From 4ca9d7856c101f4b1d2c7d3f2ad2fcce8e9a20ae Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 17 Jun 2011 15:14:23 +0200 Subject: ARM: remove duplicate include from arch/arm/mach-dove/common.c Jesper Juhl pointed out there is a redundant include of linux/serial_8250.h. However it turns out both are redundant. This patch removes them both. Reported-by: Jesper Juhl Signed-off-by: Andrew Lunn Reviewed-by: Jesper Juhl Signed-off-by: Jiri Kosina --- arch/arm/mach-dove/common.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 5ed51b84c1b2..83dce859886d 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -13,11 +13,9 @@ #include #include #include -#include #include #include #include -#include #include #include #include -- cgit v1.2.2 From e74984e46e899c22137a385869fb4f3ae756e3df Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 29 Mar 2011 15:54:48 -0700 Subject: omap: Set separate timer init functions to avoid cpu_is_omap tests This is needed for the following patches so we can initialize the rest of the hardware timers later on. As with the init_irq calls, there's no need to do cpu_is_omap calls during the timer init as we only care about the major omap generation. This means that we can initialize the sys_timer with the .timer entries alone. Note that for now we just set stubs for the various sys_timer entries that will get populated in a later patch. The following patches will also remove the omap_dm_timer_init calls and change the init for the rest of the hardware timers to happen with an arch_initcall. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/mach-omap1/board-ams-delta.c | 2 +- arch/arm/mach-omap1/board-fsample.c | 2 +- arch/arm/mach-omap1/board-generic.c | 2 +- arch/arm/mach-omap1/board-h2.c | 2 +- arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-htcherald.c | 2 +- arch/arm/mach-omap1/board-innovator.c | 2 +- arch/arm/mach-omap1/board-nokia770.c | 2 +- arch/arm/mach-omap1/board-osk.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-perseus2.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 2 +- arch/arm/mach-omap1/board-voiceblue.c | 2 +- arch/arm/mach-omap1/time.c | 6 ++--- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-3630sdp.c | 2 +- arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/board-am3517crane.c | 2 +- arch/arm/mach-omap2/board-am3517evm.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-cm-t35.c | 2 +- arch/arm/mach-omap2/board-cm-t3517.c | 2 +- arch/arm/mach-omap2/board-devkit8000.c | 2 +- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-igep0020.c | 4 +-- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-n8x0.c | 6 ++--- arch/arm/mach-omap2/board-omap3beagle.c | 2 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3logic.c | 4 +-- arch/arm/mach-omap2/board-omap3pandora.c | 2 +- arch/arm/mach-omap2/board-omap3stalker.c | 2 +- arch/arm/mach-omap2/board-omap3touchbook.c | 2 +- arch/arm/mach-omap2/board-omap4panda.c | 2 +- arch/arm/mach-omap2/board-overo.c | 2 +- arch/arm/mach-omap2/board-rm680.c | 2 +- arch/arm/mach-omap2/board-rx51.c | 2 +- arch/arm/mach-omap2/board-ti8168evm.c | 2 +- arch/arm/mach-omap2/board-zoom.c | 4 +-- arch/arm/mach-omap2/timer-gp.c | 41 ++++++++++++++++++++++-------- arch/arm/plat-omap/include/plat/common.h | 6 ++++- arch/arm/plat-omap/include/plat/dmtimer.h | 1 - 46 files changed, 86 insertions(+), 62 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 17ed7575e035..f1ac7fbf54a9 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -391,7 +391,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .reserve = omap_reserve, .init_irq = ams_delta_init_irq, .init_machine = ams_delta_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END EXPORT_SYMBOL(ams_delta_latch1_write); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index eaff305fa47d..a6b1bea50371 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -394,5 +394,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .reserve = omap_reserve, .init_irq = omap_fsample_init_irq, .init_machine = omap_fsample_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 3fd6b40d2e92..04fc356c40fa 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -99,5 +99,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .reserve = omap_reserve, .init_irq = omap_generic_init_irq, .init_machine = omap_generic_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 8147b044de56..cb7fb1aa3dca 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -466,5 +466,5 @@ MACHINE_START(OMAP_H2, "TI-H2") .reserve = omap_reserve, .init_irq = h2_init_irq, .init_machine = h2_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 1b448f641918..31f34875ffad 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -454,5 +454,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .reserve = omap_reserve, .init_irq = h3_init_irq, .init_machine = h3_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 1bd4d8e2580c..36e06ea7ec65 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -616,5 +616,5 @@ MACHINE_START(HERALD, "HTC Herald") .reserve = omap_reserve, .init_irq = htcherald_init_irq, .init_machine = htcherald_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 5926b0cf0467..0b1ba462d388 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -464,5 +464,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .reserve = omap_reserve, .init_irq = innovator_init_irq, .init_machine = innovator_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e3cf21d3c301..5469ce247ffe 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -269,5 +269,5 @@ MACHINE_START(NOKIA770, "Nokia 770") .reserve = omap_reserve, .init_irq = omap_nokia770_init_irq, .init_machine = omap_nokia770_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 1e7823d9df37..b08a21380772 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -588,5 +588,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .reserve = omap_reserve, .init_irq = osk_init_irq, .init_machine = osk_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 8b6a88184135..459cb6bfed55 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -280,5 +280,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .reserve = omap_reserve, .init_irq = omap_palmte_init_irq, .init_machine = omap_palmte_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index f2de43d8336f..b214f45f646c 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -326,5 +326,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .reserve = omap_reserve, .init_irq = omap_palmtt_init_irq, .init_machine = omap_palmtt_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 6665d2da874b..9b0ea48d35fd 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -346,5 +346,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .reserve = omap_reserve, .init_irq = omap_palmz71_init_irq, .init_machine = omap_palmz71_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 7f019e55a149..67acd4142639 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -355,5 +355,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .reserve = omap_reserve, .init_irq = omap_perseus2_init_irq, .init_machine = omap_perseus2_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 24f0f7b85567..9c3b7c52d9cf 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -426,5 +426,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .reserve = omap_reserve, .init_irq = omap_sx1_init_irq, .init_machine = omap_sx1_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 98826e2ae8ca..036edc0ee9b6 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -306,5 +306,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .reserve = omap_reserve, .init_irq = voiceblue_init_irq, .init_machine = voiceblue_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 03e1e1062ad4..a1837771e031 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -297,7 +297,7 @@ static inline int omap_32k_timer_usable(void) * Timer initialization * --------------------------------------------------------------------------- */ -static void __init omap_timer_init(void) +static void __init omap1_timer_init(void) { if (omap_32k_timer_usable()) { preferred_sched_clock_init(1); @@ -307,6 +307,6 @@ static void __init omap_timer_init(void) } } -struct sys_timer omap_timer = { - .init = omap_timer_init, +struct sys_timer omap1_timer = { + .init = omap1_timer_init, }; diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 45cabc5283e4..2028464cf5b9 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -262,5 +262,5 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .init_early = omap_2430sdp_init_early, .init_irq = omap2_init_irq, .init_machine = omap_2430sdp_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 85b207f03865..12fae21346cf 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -806,5 +806,5 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .init_early = omap_3430sdp_init_early, .init_irq = omap3_init_irq, .init_machine = omap_3430sdp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 2ec2d76087da..e4f37b57a0c4 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -221,5 +221,5 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .init_early = omap_sdp_init_early, .init_irq = omap3_init_irq, .init_machine = omap_sdp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 63de2d396e2d..128efb50215c 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -773,5 +773,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .init_early = omap_4430sdp_init_early, .init_irq = gic_init_irq, .init_machine = omap_4430sdp_init, - .timer = &omap_timer, + .timer = &omap4_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 0bed0a4c8338..5f2b55ff04ff 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -106,5 +106,5 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .init_early = am3517_crane_init_early, .init_irq = omap3_init_irq, .init_machine = am3517_crane_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 0db0fb843010..f3006c304150 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -496,5 +496,5 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .init_early = am3517_evm_init_early, .init_irq = omap3_init_irq, .init_machine = am3517_evm_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 93576c8a7157..70211703ff9f 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -356,5 +356,5 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .init_early = omap_apollon_init_early, .init_irq = omap2_init_irq, .init_machine = omap_apollon_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 2940d640a661..8b49dc2c7b9d 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -648,5 +648,5 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_early = cm_t35_init_early, .init_irq = omap3_init_irq, .init_machine = cm_t35_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 8f152228977c..aa67240da8e8 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -306,5 +306,5 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .init_early = cm_t3517_init_early, .init_irq = omap3_init_irq, .init_machine = cm_t3517_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 00f6cb6e3bf9..671aaeade116 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -707,5 +707,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .init_early = devkit8000_init_early, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index ccd503ac24bd..c6ecf607ebd6 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -72,5 +72,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") .init_early = omap_generic_init_early, .init_irq = omap2_init_irq, .init_machine = omap_generic_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 2e16d6cb3fe1..45de2b319ec9 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -388,5 +388,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .init_early = omap_h4_init_early, .init_irq = omap_h4_init_irq, .init_machine = omap_h4_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 359b765483f5..381a27c615b7 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -705,7 +705,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .init_early = igep_init_early, .init_irq = omap3_init_irq, .init_machine = igep_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -715,5 +715,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .init_early = igep_init_early, .init_irq = omap3_init_irq, .init_machine = igep_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index a054f54b1714..75ebc99f9d53 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -352,5 +352,5 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .init_early = omap_ldp_init_early, .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 9c791a291898..e11f0c5d608a 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -701,7 +701,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .init_early = n8x0_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") @@ -711,7 +711,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .init_early = n8x0_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") @@ -721,5 +721,5 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .init_early = n8x0_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 456005548718..3d416549936a 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -599,5 +599,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .init_early = omap3_beagle_init_early, .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 79d5362cb260..7cbcf6043626 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -742,5 +742,5 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .init_early = omap3_evm_init_early, .init_irq = omap3_init_irq, .init_machine = omap3_evm_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 739fdfc12338..693eba1d4f7d 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -217,7 +217,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .init_early = omap3logic_init_early, .init_irq = omap3_init_irq, .init_machine = omap3logic_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") @@ -226,5 +226,5 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .init_early = omap3logic_init_early, .init_irq = omap3_init_irq, .init_machine = omap3logic_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7b4e1391ee80..ff0be8320793 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -644,5 +644,5 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .init_early = omap3pandora_init_early, .init_irq = omap3_init_irq, .init_machine = omap3pandora_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 01616260224b..96fec1f8fca1 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -560,5 +560,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .init_early = omap3_stalker_init_early, .init_irq = omap3_stalker_init_irq, .init_machine = omap3_stalker_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 3cc553159557..9447bc06d0d0 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -449,5 +449,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .init_early = omap3_touchbook_init_early, .init_irq = omap3_touchbook_init_irq, .init_machine = omap3_touchbook_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 0cfe2005cb50..e76fe98a0bbe 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -716,5 +716,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .init_early = omap4_panda_init_early, .init_irq = gic_init_irq, .init_machine = omap4_panda_init, - .timer = &omap_timer, + .timer = &omap4_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9c9f20cd9ce1..d06248f0b802 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -617,5 +617,5 @@ MACHINE_START(OVERO, "Gumstix Overo") .init_early = overo_init_early, .init_irq = omap3_init_irq, .init_machine = overo_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 9c3d115b65d1..54dceb163415 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -165,5 +165,5 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .init_early = rm680_init_early, .init_irq = omap3_init_irq, .init_machine = rm680_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index ee35e4e8b09d..5ea142f9bc97 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -162,5 +162,5 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .init_early = rx51_init_early, .init_irq = omap3_init_irq, .init_machine = rx51_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index 713c20f20f3e..a85d5b0b11da 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -52,6 +52,6 @@ MACHINE_START(TI8168EVM, "ti8168evm") .map_io = ti8168_evm_map_io, .init_early = ti8168_init_early, .init_irq = ti816x_init_irq, - .timer = &omap_timer, + .timer = &omap3_timer, .init_machine = ti8168_evm_init, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 97a3f0b21c33..8a98c3c303fc 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -139,7 +139,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .init_early = omap_zoom_init_early, .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") @@ -149,5 +149,5 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .init_early = omap_zoom_init_early, .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 3b9cf85f4bb9..a0d8e83594eb 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -247,20 +247,41 @@ static void __init omap2_gp_clocksource_init(void) } #endif -static void __init omap2_gp_timer_init(void) +#define OMAP_SYS_TIMER_INIT(name) \ +static void __init omap##name##_timer_init(void) \ +{ \ + omap_dm_timer_init(); \ + omap2_gp_clockevent_init(); \ + omap2_gp_clocksource_init(); \ +} + +#define OMAP_SYS_TIMER(name) \ +struct sys_timer omap##name##_timer = { \ + .init = omap##name##_timer_init, \ +}; + +#ifdef CONFIG_ARCH_OMAP2 +OMAP_SYS_TIMER_INIT(2) +OMAP_SYS_TIMER(2) +#endif + +#ifdef CONFIG_ARCH_OMAP3 +OMAP_SYS_TIMER_INIT(3) +OMAP_SYS_TIMER(3) +OMAP_SYS_TIMER_INIT(3_secure) +OMAP_SYS_TIMER(3_secure) +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static void __init omap4_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS - if (cpu_is_omap44xx()) { - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); - BUG_ON(!twd_base); - } + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); + BUG_ON(!twd_base); #endif omap_dm_timer_init(); - omap2_gp_clockevent_init(); omap2_gp_clocksource_init(); } - -struct sys_timer omap_timer = { - .init = omap2_gp_timer_init, -}; +OMAP_SYS_TIMER(4) +#endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 5288130be96e..4564cc697d7f 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -34,7 +34,11 @@ struct sys_timer; extern void omap_map_common_io(void); -extern struct sys_timer omap_timer; +extern struct sys_timer omap1_timer; +extern struct sys_timer omap2_timer; +extern struct sys_timer omap3_timer; +extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap4_timer; extern bool omap_32k_timer_init(void); extern int __init omap_init_clocksource_32k(void); extern unsigned long long notrace omap_32k_sched_clock(void); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index d6c70d2f4030..330bd17bb5e7 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -57,7 +57,6 @@ #define OMAP_TIMER_IP_VERSION_1 0x1 struct omap_dm_timer; extern struct omap_dm_timer *gptimer_wakeup; -extern struct sys_timer omap_timer; struct clk; int omap_dm_timer_init(void); -- cgit v1.2.2 From ec97489d199b3dcfc44042ccf89b37a264d14565 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 29 Mar 2011 15:54:48 -0700 Subject: omap: Move dmtimer defines to dmtimer.h These will be needed when dmtimer platform init code gets split for omap1 and omap2+. These will also be needed for separate sys_timer init and driver init for the rest of the hardware timers in the following patches. No functional changes. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/plat-omap/dmtimer.c | 121 ----------------------------- arch/arm/plat-omap/include/plat/dmtimer.h | 125 ++++++++++++++++++++++++++++++ 2 files changed, 125 insertions(+), 121 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index ee9f6ebba29b..dfdc3b2e3201 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -41,127 +41,6 @@ #include #include -/* register offsets */ -#define _OMAP_TIMER_ID_OFFSET 0x00 -#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10 -#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14 -#define _OMAP_TIMER_STAT_OFFSET 0x18 -#define _OMAP_TIMER_INT_EN_OFFSET 0x1c -#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 -#define _OMAP_TIMER_CTRL_OFFSET 0x24 -#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) -#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) -#define OMAP_TIMER_CTRL_PT (1 << 12) -#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) -#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) -#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) -#define OMAP_TIMER_CTRL_SCPWM (1 << 7) -#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ -#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ -#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ -#define OMAP_TIMER_CTRL_POSTED (1 << 2) -#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ -#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ -#define _OMAP_TIMER_COUNTER_OFFSET 0x28 -#define _OMAP_TIMER_LOAD_OFFSET 0x2c -#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 -#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 -#define WP_NONE 0 /* no write pending bit */ -#define WP_TCLR (1 << 0) -#define WP_TCRR (1 << 1) -#define WP_TLDR (1 << 2) -#define WP_TTGR (1 << 3) -#define WP_TMAR (1 << 4) -#define WP_TPIR (1 << 5) -#define WP_TNIR (1 << 6) -#define WP_TCVR (1 << 7) -#define WP_TOCR (1 << 8) -#define WP_TOWR (1 << 9) -#define _OMAP_TIMER_MATCH_OFFSET 0x38 -#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c -#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 -#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ -#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ -#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ -#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ -#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ -#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ - -/* register offsets with the write pending bit encoded */ -#define WPSHIFT 16 - -#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ - | (WP_TCLR << WPSHIFT)) - -#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ - | (WP_TCRR << WPSHIFT)) - -#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ - | (WP_TLDR << WPSHIFT)) - -#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ - | (WP_TTGR << WPSHIFT)) - -#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ - | (WP_TMAR << WPSHIFT)) - -#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ - | (WP_TPIR << WPSHIFT)) - -#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ - | (WP_TNIR << WPSHIFT)) - -#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ - | (WP_TCVR << WPSHIFT)) - -#define OMAP_TIMER_TICK_INT_MASK_SET_REG \ - (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) - -#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ - (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) - -struct omap_dm_timer { - unsigned long phys_base; - int irq; -#ifdef CONFIG_ARCH_OMAP2PLUS - struct clk *iclk, *fclk; -#endif - void __iomem *io_base; - unsigned reserved:1; - unsigned enabled:1; - unsigned posted:1; -}; - static int dm_timer_count; #ifdef CONFIG_ARCH_OMAP1 diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 330bd17bb5e7..32031056165d 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -92,5 +92,130 @@ void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value int omap_dm_timers_active(void); +/* + * Do not use the defines below, they are not needed. They should be only + * used by dmtimer.c and sys_timer related code. + */ + +/* register offsets */ +#define _OMAP_TIMER_ID_OFFSET 0x00 +#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10 +#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14 +#define _OMAP_TIMER_STAT_OFFSET 0x18 +#define _OMAP_TIMER_INT_EN_OFFSET 0x1c +#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 +#define _OMAP_TIMER_CTRL_OFFSET 0x24 +#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) +#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) +#define OMAP_TIMER_CTRL_PT (1 << 12) +#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) +#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) +#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) +#define OMAP_TIMER_CTRL_SCPWM (1 << 7) +#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ +#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ +#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ +#define OMAP_TIMER_CTRL_POSTED (1 << 2) +#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ +#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ +#define _OMAP_TIMER_COUNTER_OFFSET 0x28 +#define _OMAP_TIMER_LOAD_OFFSET 0x2c +#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 +#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 +#define WP_NONE 0 /* no write pending bit */ +#define WP_TCLR (1 << 0) +#define WP_TCRR (1 << 1) +#define WP_TLDR (1 << 2) +#define WP_TTGR (1 << 3) +#define WP_TMAR (1 << 4) +#define WP_TPIR (1 << 5) +#define WP_TNIR (1 << 6) +#define WP_TCVR (1 << 7) +#define WP_TOCR (1 << 8) +#define WP_TOWR (1 << 9) +#define _OMAP_TIMER_MATCH_OFFSET 0x38 +#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c +#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 +#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ +#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ +#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ +#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ + +/* register offsets with the write pending bit encoded */ +#define WPSHIFT 16 + +#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ + | (WP_TCLR << WPSHIFT)) + +#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ + | (WP_TCRR << WPSHIFT)) + +#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ + | (WP_TLDR << WPSHIFT)) + +#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ + | (WP_TTGR << WPSHIFT)) + +#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ + | (WP_TMAR << WPSHIFT)) + +#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ + | (WP_TPIR << WPSHIFT)) + +#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ + | (WP_TNIR << WPSHIFT)) + +#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ + | (WP_TCVR << WPSHIFT)) + +#define OMAP_TIMER_TICK_INT_MASK_SET_REG \ + (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) + +#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ + (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) + +struct omap_dm_timer { + unsigned long phys_base; + int irq; +#ifdef CONFIG_ARCH_OMAP2PLUS + struct clk *iclk, *fclk; +#endif + void __iomem *io_base; + unsigned reserved:1; + unsigned enabled:1; + unsigned posted:1; +}; #endif /* __ASM_ARCH_DMTIMER_H */ -- cgit v1.2.2 From caf64f2fdc48472995d40656eb1a75524c464447 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 29 Mar 2011 15:54:48 -0700 Subject: omap: Make a subset of dmtimer functions into inline functions This will allow us to share the code between system timer and dmtimer device driver code without having to initialize all the dmtimers early. This change will also make the timer_set_next_event more efficient as the inline functions will optimize the code better for the timer reprogramming. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/plat-omap/dmtimer.c | 78 +++++--------------- arch/arm/plat-omap/include/plat/dmtimer.h | 119 ++++++++++++++++++++++++++++++ 2 files changed, 136 insertions(+), 61 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index dfdc3b2e3201..7c5cb4e128f2 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -170,11 +170,7 @@ static spinlock_t dm_timer_lock; */ static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg) { - if (timer->posted) - while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) - cpu_relax(); - return readl(timer->io_base + (reg & 0xff)); + return __omap_dm_timer_read(timer->io_base, reg, timer->posted); } /* @@ -186,11 +182,7 @@ static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg) static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, u32 value) { - if (timer->posted) - while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) - cpu_relax(); - writel(value, timer->io_base + (reg & 0xff)); + __omap_dm_timer_write(timer->io_base, reg, value, timer->posted); } static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) @@ -209,7 +201,7 @@ static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) static void omap_dm_timer_reset(struct omap_dm_timer *timer) { - u32 l; + int autoidle = 0, wakeup = 0; if (!cpu_class_is_omap2() || timer != &dm_timers[0]) { omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); @@ -217,28 +209,21 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) } omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG); - l |= 0x02 << 3; /* Set to smart-idle mode */ - l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ - /* Enable autoidle on OMAP2 / OMAP3 */ if (cpu_is_omap24xx() || cpu_is_omap34xx()) - l |= 0x1 << 0; + autoidle = 1; /* * Enable wake-up on OMAP2 CPUs. */ if (cpu_class_is_omap2()) - l |= 1 << 2; - omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); + wakeup = 1; - /* Match hardware reset default of posted mode */ - omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, - OMAP_TIMER_CTRL_POSTED); + __omap_dm_timer_reset(timer->io_base, autoidle, wakeup); timer->posted = 1; } -static void omap_dm_timer_prepare(struct omap_dm_timer *timer) +void omap_dm_timer_prepare(struct omap_dm_timer *timer) { omap_dm_timer_enable(timer); omap_dm_timer_reset(timer); @@ -410,25 +395,13 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start); void omap_dm_timer_stop(struct omap_dm_timer *timer) { - u32 l; + unsigned long rate = 0; - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - if (l & OMAP_TIMER_CTRL_ST) { - l &= ~0x1; - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); #ifdef CONFIG_ARCH_OMAP2PLUS - /* Readback to make sure write has completed */ - omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - /* - * Wait for functional clock period x 3.5 to make sure that - * timer is stopped - */ - udelay(3500000 / clk_get_rate(timer->fclk) + 1); + rate = clk_get_rate(timer->fclk); #endif - } - /* Ack possibly pending interrupt */ - omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, - OMAP_TIMER_INT_OVERFLOW); + + __omap_dm_timer_stop(timer->io_base, timer->posted, rate); } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); @@ -451,22 +424,11 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { - int ret = -EINVAL; - if (source < 0 || source >= 3) return -EINVAL; - clk_disable(timer->fclk); - ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); - clk_enable(timer->fclk); - - /* - * When the functional clock disappears, too quick writes seem - * to cause an abort. XXX Is this still necessary? - */ - __delay(300000); - - return ret; + return __omap_dm_timer_set_source(timer->fclk, + dm_source_clocks[source]); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); @@ -504,8 +466,7 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, } l |= OMAP_TIMER_CTRL_ST; - omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load); - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); + __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start); @@ -558,8 +519,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler); void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); - omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value); + __omap_dm_timer_int_enable(timer->io_base, value); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); @@ -575,17 +535,13 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_read_status); void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value); + __omap_dm_timer_write_status(timer->io_base, value); } EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) { - unsigned int l; - - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); - - return l; + return __omap_dm_timer_read_counter(timer->io_base, timer->posted); } EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 32031056165d..54664a7498af 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -32,6 +32,9 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include + #ifndef __ASM_ARCH_DMTIMER_H #define __ASM_ARCH_DMTIMER_H @@ -218,4 +221,120 @@ struct omap_dm_timer { unsigned posted:1; }; +void omap_dm_timer_prepare(struct omap_dm_timer *timer); + +static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg, + int posted) +{ + if (posted) + while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) + & (reg >> WPSHIFT)) + cpu_relax(); + + return __raw_readl(base + (reg & 0xff)); +} + +static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val, + int posted) +{ + if (posted) + while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) + & (reg >> WPSHIFT)) + cpu_relax(); + + __raw_writel(val, base + (reg & 0xff)); +} + +/* Assumes the source clock has been set by caller */ +static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle, + int wakeup) +{ + u32 l; + + l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0); + l |= 0x02 << 3; /* Set to smart-idle mode */ + l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ + + if (autoidle) + l |= 0x1 << 0; + + if (wakeup) + l |= 1 << 2; + + __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0); + + /* Match hardware reset default of posted mode */ + __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG, + OMAP_TIMER_CTRL_POSTED, 0); +} + +static inline int __omap_dm_timer_set_source(struct clk *timer_fck, + struct clk *parent) +{ + int ret; + + clk_disable(timer_fck); + ret = clk_set_parent(timer_fck, parent); + clk_enable(timer_fck); + + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ + __delay(300000); + + return ret; +} + +static inline void __omap_dm_timer_stop(void __iomem *base, int posted, + unsigned long rate) +{ + u32 l; + + l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); + if (l & OMAP_TIMER_CTRL_ST) { + l &= ~0x1; + __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted); +#ifdef CONFIG_ARCH_OMAP2PLUS + /* Readback to make sure write has completed */ + __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); + /* + * Wait for functional clock period x 3.5 to make sure that + * timer is stopped + */ + udelay(3500000 / rate + 1); +#endif + } + + /* Ack possibly pending interrupt */ + __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, + OMAP_TIMER_INT_OVERFLOW, 0); +} + +static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl, + unsigned int load, int posted) +{ + __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted); + __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted); +} + +static inline void __omap_dm_timer_int_enable(void __iomem *base, + unsigned int value) +{ + __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0); + __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0); +} + +static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base, + int posted) +{ + return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted); +} + +static inline void __omap_dm_timer_write_status(void __iomem *base, + unsigned int value) +{ + __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0); +} + #endif /* __ASM_ARCH_DMTIMER_H */ -- cgit v1.2.2 From aa56188998942dfd1d6d85484c87f79268508bba Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 29 Mar 2011 15:54:48 -0700 Subject: omap2+: Use dmtimer macros for clockevent This patch makes timer-gp.c to use only a subset of dmtimer functions without the need to initialize dmtimer code early. Also note that now with the inline functions, timer_set_next_event becomes more efficient in the lines of assembly code. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/mach-omap2/timer-gp.c | 147 +++++++++++++++++++++++------- arch/arm/plat-omap/include/plat/dmtimer.h | 1 + 2 files changed, 113 insertions(+), 35 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index a0d8e83594eb..62c0d5cb25f7 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -45,10 +45,33 @@ #include "timer-gp.h" +/* Parent clocks, eventually these will come from the clock framework */ + +#define OMAP2_MPU_SOURCE "sys_ck" +#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE +#define OMAP4_MPU_SOURCE "sys_clkin_ck" +#define OMAP2_32K_SOURCE "func_32k_ck" +#define OMAP3_32K_SOURCE "omap_32k_fck" +#define OMAP4_32K_SOURCE "sys_32k_ck" + +#ifdef CONFIG_OMAP_32K_TIMER +#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE +#define OMAP3_SECURE_TIMER 12 +#else +#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE +#define OMAP3_SECURE_TIMER 1 +#endif /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 +/* Clockevent code */ + +static struct omap_dm_timer clkev; static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; static u8 __initdata gptimer_id = 1; @@ -57,10 +80,9 @@ struct omap_dm_timer *gptimer_wakeup; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { - struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id; struct clock_event_device *evt = &clockevent_gpt; - omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW); + __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); evt->event_handler(evt); return IRQ_HANDLED; @@ -75,7 +97,8 @@ static struct irqaction omap2_gp_timer_irq = { static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles); + __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST, + 0xffffffff - cycles, 1); return 0; } @@ -85,13 +108,18 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - omap_dm_timer_stop(gptimer); + __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; + period = clkev.rate / HZ; period -= 1; - omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period); + /* Looks like we need to first set the load value separately */ + __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG, + 0xffffffff - period, 1); + __omap_dm_timer_load_start(clkev.io_base, + OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, + 0xffffffff - period, 1); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -130,43 +158,89 @@ int __init omap2_gp_clockevent_set_gptimer(u8 id) return 0; } -static void __init omap2_gp_clockevent_init(void) +static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, + int gptimer_id, + const char *fck_source) { - u32 tick_rate; - int src; - char clockevent_hwmod_name[8]; /* 8 = sizeof("timerXX0") */ + char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + struct omap_hwmod *oh; + size_t size; + int res = 0; + + sprintf(name, "timer%d", gptimer_id); + omap_hwmod_setup_one(name); + oh = omap_hwmod_lookup(name); + if (!oh) + return -ENODEV; + + timer->irq = oh->mpu_irqs[0].irq; + timer->phys_base = oh->slaves[0]->addr->pa_start; + size = oh->slaves[0]->addr->pa_end - timer->phys_base; + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, size); + if (!timer->io_base) + return -ENXIO; + + /* After the dmtimer is using hwmod these clocks won't be needed */ + sprintf(name, "gpt%d_fck", gptimer_id); + timer->fclk = clk_get(NULL, name); + if (IS_ERR(timer->fclk)) + return -ENODEV; + + sprintf(name, "gpt%d_ick", gptimer_id); + timer->iclk = clk_get(NULL, name); + if (IS_ERR(timer->iclk)) { + clk_put(timer->fclk); + return -ENODEV; + } - inited = 1; + omap_hwmod_enable(oh); + + if (gptimer_id != 12) { + struct clk *src; + + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) { + res = -EINVAL; + } else { + res = __omap_dm_timer_set_source(timer->fclk, src); + if (IS_ERR_VALUE(res)) + pr_warning("%s: timer%i cannot set source\n", + __func__, gptimer_id); + clk_put(src); + } + } + __omap_dm_timer_reset(timer->io_base, 1, 1); + timer->posted = 1; + + timer->rate = clk_get_rate(timer->fclk); - sprintf(clockevent_hwmod_name, "timer%d", gptimer_id); - omap_hwmod_setup_one(clockevent_hwmod_name); + timer->reserved = 1; gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); gptimer_wakeup = gptimer; -#if defined(CONFIG_OMAP_32K_TIMER) - src = OMAP_TIMER_SRC_32_KHZ; -#else - src = OMAP_TIMER_SRC_SYS_CLK; - WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " - "secure 32KiHz clock source\n"); -#endif + return res; +} - if (gptimer_id != 12) - WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), - "timer-gp: omap_dm_timer_set_source() failed\n"); +static void __init omap2_gp_clockevent_init(int gptimer_id, + const char *fck_source) +{ + int res; - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + inited = 1; - pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", - gptimer_id, tick_rate); + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + BUG_ON(res); omap2_gp_timer_irq.dev_id = (void *)gptimer; - setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); - omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); + setup_irq(clkev.irq, &omap2_gp_timer_irq); - clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC, + __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + + clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC, clockevent_gpt.shift); clockevent_gpt.max_delta_ns = clockevent_delta2ns(0xffffffff, &clockevent_gpt); @@ -176,6 +250,9 @@ static void __init omap2_gp_clockevent_init(void) clockevent_gpt.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_gpt); + + pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", + gptimer_id, clkev.rate); } /* Clocksource code */ @@ -247,11 +324,11 @@ static void __init omap2_gp_clocksource_init(void) } #endif -#define OMAP_SYS_TIMER_INIT(name) \ +#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src) \ static void __init omap##name##_timer_init(void) \ { \ omap_dm_timer_init(); \ - omap2_gp_clockevent_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src); \ omap2_gp_clocksource_init(); \ } @@ -261,14 +338,14 @@ struct sys_timer omap##name##_timer = { \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2) +OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE) OMAP_SYS_TIMER(2) #endif #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3) +OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE) OMAP_SYS_TIMER(3) -OMAP_SYS_TIMER_INIT(3_secure) +OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE) OMAP_SYS_TIMER(3_secure) #endif @@ -280,7 +357,7 @@ static void __init omap4_timer_init(void) BUG_ON(!twd_base); #endif omap_dm_timer_init(); - omap2_gp_clockevent_init(); + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); omap2_gp_clocksource_init(); } OMAP_SYS_TIMER(4) diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 54664a7498af..dd8b3ffb7521 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -216,6 +216,7 @@ struct omap_dm_timer { struct clk *iclk, *fclk; #endif void __iomem *io_base; + unsigned long rate; unsigned reserved:1; unsigned enabled:1; unsigned posted:1; -- cgit v1.2.2 From 98e182a26bbbf5575457622337684ef61493e864 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 29 Mar 2011 15:54:49 -0700 Subject: omap2+: Remove gptimer_wakeup for now This removes the support for setting the wake-up timer for debugging. Later on we can reserve gptimer1 for PM code only and have similar functionality. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 28 ---------------------------- arch/arm/mach-omap2/pm.h | 6 ------ arch/arm/mach-omap2/pm34xx.c | 4 ---- arch/arm/mach-omap2/timer-gp.c | 8 +------- arch/arm/plat-omap/include/plat/dmtimer.h | 1 - 5 files changed, 1 insertion(+), 46 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index a5a83b358ddd..c56d1d47fec4 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -31,7 +31,6 @@ #include #include "powerdomain.h" #include "clockdomain.h" -#include #include #include "cm2xxx_3xxx.h" @@ -41,8 +40,6 @@ int omap2_pm_debug; u32 enable_off_mode; u32 sleep_while_idle; -u32 wakeup_timer_seconds; -u32 wakeup_timer_milliseconds; #define DUMP_PRM_MOD_REG(mod, reg) \ regs[reg_count].name = #mod "." #reg; \ @@ -162,23 +159,6 @@ void omap2_pm_dump(int mode, int resume, unsigned int us) printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); } -void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) -{ - u32 tick_rate, cycles; - - if (!seconds && !milliseconds) - return; - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; - omap_dm_timer_stop(gptimer_wakeup); - omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - - pr_info("PM: Resume timer in %u.%03u secs" - " (%d ticks at %d ticks/sec.)\n", - seconds, milliseconds, cycles, tick_rate); -} - #ifdef CONFIG_DEBUG_FS #include #include @@ -576,9 +556,6 @@ static int option_set(void *data, u64 val) { u32 *option = data; - if (option == &wakeup_timer_milliseconds && val >= 1000) - return -EINVAL; - *option = val; if (option == &enable_off_mode) { @@ -641,11 +618,6 @@ static int __init pm_dbg_init(void) &enable_off_mode, &pm_dbg_option_fops); (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d, &sleep_while_idle, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d, - &wakeup_timer_seconds, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_milliseconds", - S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds, - &pm_dbg_option_fops); pm_dbg_init_done = 1; return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 45bcfce77352..c3a367e3d010 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -60,19 +60,13 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); -extern u32 wakeup_timer_seconds; -extern u32 wakeup_timer_milliseconds; -extern struct omap_dm_timer *gptimer_wakeup; - #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); -extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds); extern int omap2_pm_debug; extern u32 enable_off_mode; extern u32 sleep_while_idle; #else #define omap2_pm_dump(mode, resume, us) do {} while (0); -#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0); #define omap2_pm_debug 0 #define enable_off_mode 0 #define sleep_while_idle 0 diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c155c9d1c82c..4cb636af7045 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -534,10 +534,6 @@ static int omap3_pm_suspend(void) struct power_state *pwrst; int state, ret = 0; - if (wakeup_timer_seconds || wakeup_timer_milliseconds) - omap2_pm_wakeup_on_timer(wakeup_timer_seconds, - wakeup_timer_milliseconds); - /* Read current next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 62c0d5cb25f7..578e9df4fdea 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -72,11 +72,9 @@ /* Clockevent code */ static struct omap_dm_timer clkev; -static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; static u8 __initdata gptimer_id = 1; static u8 __initdata inited; -struct omap_dm_timer *gptimer_wakeup; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -218,10 +216,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, timer->reserved = 1; - gptimer = omap_dm_timer_request_specific(gptimer_id); - BUG_ON(gptimer == NULL); - gptimer_wakeup = gptimer; - return res; } @@ -235,7 +229,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); BUG_ON(res); - omap2_gp_timer_irq.dev_id = (void *)gptimer; + omap2_gp_timer_irq.dev_id = (void *)&clkev; setup_irq(clkev.irq, &omap2_gp_timer_irq); __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index dd8b3ffb7521..8adcb187fe71 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -59,7 +59,6 @@ */ #define OMAP_TIMER_IP_VERSION_1 0x1 struct omap_dm_timer; -extern struct omap_dm_timer *gptimer_wakeup; struct clk; int omap_dm_timer_init(void); -- cgit v1.2.2 From e44ba033c5654dbfda53461c9b1f7dd9bd1d198f Mon Sep 17 00:00:00 2001 From: Vitaliy Ivanov Date: Mon, 20 Jun 2011 16:08:07 +0200 Subject: treewide: remove duplicate includes Many stupid corrections of duplicated includes based on the output of scripts/checkincludes.pl. Signed-off-by: Vitaliy Ivanov Signed-off-by: Jiri Kosina --- arch/arm/mach-s3c2410/h1940-bluetooth.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 2c126bbca08d..a5eeb62ce1c2 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include -- cgit v1.2.2 From b85a3ef4ac65169b65fd2fe9bec7912bbf475ba4 Mon Sep 17 00:00:00 2001 From: John Linn Date: Mon, 20 Jun 2011 11:47:27 -0600 Subject: ARM: Xilinx: Adding Xilinx board support The 1st board support is minimal to get a system up and running on the Xilinx platform. This platform reuses the clock implementation from plat-versatile, and it depends entirely on CONFIG_OF support. There is only one board support file which obtains all device information from a device tree dtb file which is passed to the kernel at boot time. Signed-off-by: John Linn --- arch/arm/Kconfig | 14 ++ arch/arm/Makefile | 2 + arch/arm/boot/dts/zynq-ep107.dts | 52 +++++ arch/arm/mach-zynq/Makefile | 6 + arch/arm/mach-zynq/Makefile.boot | 3 + arch/arm/mach-zynq/board_dt.c | 37 ++++ arch/arm/mach-zynq/common.c | 102 +++++++++ arch/arm/mach-zynq/common.h | 29 +++ arch/arm/mach-zynq/include/mach/clkdev.h | 32 +++ arch/arm/mach-zynq/include/mach/debug-macro.S | 36 ++++ arch/arm/mach-zynq/include/mach/entry-macro.S | 30 +++ arch/arm/mach-zynq/include/mach/hardware.h | 18 ++ arch/arm/mach-zynq/include/mach/io.h | 33 +++ arch/arm/mach-zynq/include/mach/irqs.h | 21 ++ arch/arm/mach-zynq/include/mach/memory.h | 22 ++ arch/arm/mach-zynq/include/mach/system.h | 28 +++ arch/arm/mach-zynq/include/mach/timex.h | 23 ++ arch/arm/mach-zynq/include/mach/uart.h | 25 +++ arch/arm/mach-zynq/include/mach/uncompress.h | 51 +++++ arch/arm/mach-zynq/include/mach/vmalloc.h | 20 ++ arch/arm/mach-zynq/include/mach/zynq_soc.h | 48 +++++ arch/arm/mach-zynq/timer.c | 298 ++++++++++++++++++++++++++ arch/arm/mm/Kconfig | 2 +- 23 files changed, 931 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/zynq-ep107.dts create mode 100644 arch/arm/mach-zynq/Makefile create mode 100644 arch/arm/mach-zynq/Makefile.boot create mode 100644 arch/arm/mach-zynq/board_dt.c create mode 100644 arch/arm/mach-zynq/common.c create mode 100644 arch/arm/mach-zynq/common.h create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h create mode 100644 arch/arm/mach-zynq/include/mach/debug-macro.S create mode 100644 arch/arm/mach-zynq/include/mach/entry-macro.S create mode 100644 arch/arm/mach-zynq/include/mach/hardware.h create mode 100644 arch/arm/mach-zynq/include/mach/io.h create mode 100644 arch/arm/mach-zynq/include/mach/irqs.h create mode 100644 arch/arm/mach-zynq/include/mach/memory.h create mode 100644 arch/arm/mach-zynq/include/mach/system.h create mode 100644 arch/arm/mach-zynq/include/mach/timex.h create mode 100644 arch/arm/mach-zynq/include/mach/uart.h create mode 100644 arch/arm/mach-zynq/include/mach/uncompress.h create mode 100644 arch/arm/mach-zynq/include/mach/vmalloc.h create mode 100644 arch/arm/mach-zynq/include/mach/zynq_soc.h create mode 100644 arch/arm/mach-zynq/timer.c (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278a22ab..9e76a75a490b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -879,6 +879,20 @@ config ARCH_VT8500 select HAVE_PWM help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. + +config ARCH_ZYNQ + bool "Xilinx Zynq ARM Cortex A9 Platform" + select CPU_V7 + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select ARM_GIC + select ARM_AMBA + select ICST + select USE_OF + help + Support for Xilinx Zynq ARM Cortex A9 Platform + endchoice # diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f5b2b390c8f2..999c17aa8571 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -196,6 +196,7 @@ machine-$(CONFIG_MACH_SPEAR300) := spear3xx machine-$(CONFIG_MACH_SPEAR310) := spear3xx machine-$(CONFIG_MACH_SPEAR320) := spear3xx machine-$(CONFIG_MACH_SPEAR600) := spear6xx +machine-$(CONFIG_ARCH_ZYNQ) := zynq # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. @@ -203,6 +204,7 @@ plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_ARCH_S3C64XX) := samsung plat-$(CONFIG_ARCH_TCC_926) := tcc +plat-$(CONFIG_ARCH_ZYNQ) := versatile plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts new file mode 100644 index 000000000000..37ca192fb193 --- /dev/null +++ b/arch/arm/boot/dts/zynq-ep107.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +/ { + model = "Xilinx Zynq EP107"; + compatible = "xlnx,zynq-ep107"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk"; + linux,stdout-path = &uart0; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + intc: interrupt-controller@f8f01000 { + interrupt-controller; + compatible = "arm,gic"; + reg = <0xF8F01000 0x1000>; + #interrupt-cells = <2>; + }; + + uart0: uart@e0000000 { + compatible = "xlnx,xuartps"; + reg = <0xE0000000 0x1000>; + interrupts = <59 0>; + clock = <50000000>; + }; + }; +}; diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile new file mode 100644 index 000000000000..c550c67aa893 --- /dev/null +++ b/arch/arm/mach-zynq/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := common.o timer.o board_dt.o diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot new file mode 100644 index 000000000000..67039c3e0c48 --- /dev/null +++ b/arch/arm/mach-zynq/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-zynq/board_dt.c b/arch/arm/mach-zynq/board_dt.c new file mode 100644 index 000000000000..5b4710d09258 --- /dev/null +++ b/arch/arm/mach-zynq/board_dt.c @@ -0,0 +1,37 @@ +/* + * This file contains code for boards with device tree support. + * + * Copyright (C) 2011 Xilinx + * + * based on arch/arm/mach-realview/core.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include "common.h" + +static const char *xilinx_dt_match[] = { + "xlnx,zynq-ep107", + NULL +}; + +MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") + .map_io = xilinx_map_io, + .init_irq = xilinx_irq_init, + .init_machine = xilinx_init_machine, + .timer = &xttcpss_sys_timer, + .dt_compat = xilinx_dt_match, +MACHINE_END diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c new file mode 100644 index 000000000000..b3ac5c2e12dc --- /dev/null +++ b/arch/arm/mach-zynq/common.c @@ -0,0 +1,102 @@ +/* + * This file contains common code that is intended to be used across + * boards so that it's not replicated. + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include "common.h" + +static struct of_device_id zynq_of_bus_ids[] __initdata = { + { .compatible = "simple-bus", }, + {} +}; + +/** + * xilinx_init_machine() - System specific initialization, intended to be + * called from board specific initialization. + */ +void __init xilinx_init_machine(void) +{ +#ifdef CONFIG_CACHE_L2X0 + /* + * 64KB way size, 8-way associativity, parity disabled + */ + l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF); +#endif + + of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); +} + +/** + * xilinx_irq_init() - Interrupt controller initialization for the GIC. + */ +void __init xilinx_irq_init(void) +{ + gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE); +} + +/* The minimum devices needed to be mapped before the VM system is up and + * running include the GIC, UART and Timer Counter. + */ + +static struct map_desc io_desc[] __initdata = { + { + .virtual = TTC0_VIRT, + .pfn = __phys_to_pfn(TTC0_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = SCU_PERIPH_VIRT, + .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), + .length = SZ_8K, + .type = MT_DEVICE, + }, { + .virtual = PL310_L2CC_VIRT, + .pfn = __phys_to_pfn(PL310_L2CC_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, + +#ifdef CONFIG_DEBUG_LL + { + .virtual = UART0_VIRT, + .pfn = __phys_to_pfn(UART0_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif + +}; + +/** + * xilinx_map_io() - Create memory mappings needed for early I/O. + */ +void __init xilinx_map_io(void) +{ + iotable_init(io_desc, ARRAY_SIZE(io_desc)); +} diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h new file mode 100644 index 000000000000..bca21968f80b --- /dev/null +++ b/arch/arm/mach-zynq/common.h @@ -0,0 +1,29 @@ +/* + * This file contains common function prototypes to avoid externs + * in the c files. + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_ZYNQ_COMMON_H__ +#define __MACH_ZYNQ_COMMON_H__ + +#include +#include + +extern void xilinx_init_machine(void); +extern void xilinx_irq_init(void); +extern void xilinx_map_io(void); + +extern struct sys_timer xttcpss_sys_timer; + +#endif diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h new file mode 100644 index 000000000000..c6e73d81a459 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/clkdev.h @@ -0,0 +1,32 @@ +/* + * arch/arm/mach-zynq/include/mach/clkdev.h + * + * Copyright (C) 2011 Xilinx, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_CLKDEV_H__ +#define __MACH_CLKDEV_H__ + +#include + +struct clk { + unsigned long rate; + const struct clk_ops *ops; + const struct icst_params *params; + void __iomem *vcoreg; +}; + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S new file mode 100644 index 000000000000..9f664d5eb81d --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/debug-macro.S @@ -0,0 +1,36 @@ +/* arch/arm/mach-zynq/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + + .macro addruart, rp, rv + ldr \rp, =LL_UART_PADDR @ physical + ldr \rv, =LL_UART_VADDR @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #UART_FIFO_OFFSET] @ TXDATA + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register + tst \rd, #UART_SR_TXFULL @ + bne 1002b @ wait if FIFO is full + .endm diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S new file mode 100644 index 000000000000..3cfc01b37461 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/entry-macro.S @@ -0,0 +1,30 @@ +/* + * arch/arm/mach-zynq/include/mach/entry-macro.S + * + * Low-level IRQ helper macros + * + * Copyright (C) 2011 Xilinx + * + * based on arch/plat-mxc/include/mach/entry-macro.S + * + * Copyright (C) 2007 Lennert Buytenhek + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-zynq/include/mach/hardware.h b/arch/arm/mach-zynq/include/mach/hardware.h new file mode 100644 index 000000000000..d558d8a94be7 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-zynq/include/mach/hardware.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_HARDWARE_H__ +#define __MACH_HARDWARE_H__ + +#endif diff --git a/arch/arm/mach-zynq/include/mach/io.h b/arch/arm/mach-zynq/include/mach/io.h new file mode 100644 index 000000000000..39d9885e0e9a --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/io.h @@ -0,0 +1,33 @@ +/* arch/arm/mach-zynq/include/mach/io.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_IO_H__ +#define __MACH_IO_H__ + +/* Allow IO space to be anywhere in the memory */ + +#define IO_SPACE_LIMIT 0xffff + +/* IO address mapping macros, nothing special at this time but required */ + +#ifdef __ASSEMBLER__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/irqs.h b/arch/arm/mach-zynq/include/mach/irqs.h new file mode 100644 index 000000000000..5fb04fd3bac8 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/irqs.h @@ -0,0 +1,21 @@ +/* arch/arm/mach-zynq/include/mach/irqs.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +#define ARCH_NR_GPIOS 118 +#define NR_IRQS (128 + ARCH_NR_GPIOS) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h new file mode 100644 index 000000000000..35a92634dcc1 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/memory.h @@ -0,0 +1,22 @@ +/* arch/arm/mach-zynq/include/mach/memory.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_MEMORY_H__ +#define __MACH_MEMORY_H__ + +#include + +#define PLAT_PHYS_OFFSET UL(0x0) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h new file mode 100644 index 000000000000..1b84d705c675 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/system.h @@ -0,0 +1,28 @@ +/* arch/arm/mach-zynq/include/mach/system.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_SYSTEM_H__ +#define __MACH_SYSTEM_H__ + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + /* Add architecture specific reset processing here */ +} + +#endif diff --git a/arch/arm/mach-zynq/include/mach/timex.h b/arch/arm/mach-zynq/include/mach/timex.h new file mode 100644 index 000000000000..6c0245e42a5e --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/timex.h @@ -0,0 +1,23 @@ +/* arch/arm/mach-zynq/include/mach/timex.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_TIMEX_H__ +#define __MACH_TIMEX_H__ + +/* the following is needed for the system to build but will be removed + in the future, the value is not important but won't hurt +*/ +#define CLOCK_TICK_RATE (100 * HZ) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/uart.h b/arch/arm/mach-zynq/include/mach/uart.h new file mode 100644 index 000000000000..5c47c97156f3 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/uart.h @@ -0,0 +1,25 @@ +/* arch/arm/mach-zynq/include/mach/uart.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_UART_H__ +#define __MACH_UART_H__ + +#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */ +#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */ +#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */ + +#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */ +#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ + +#endif diff --git a/arch/arm/mach-zynq/include/mach/uncompress.h b/arch/arm/mach-zynq/include/mach/uncompress.h new file mode 100644 index 000000000000..af4e8447bfa3 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/uncompress.h @@ -0,0 +1,51 @@ +/* arch/arm/mach-zynq/include/mach/uncompress.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_UNCOMPRESS_H__ +#define __MACH_UNCOMPRESS_H__ + +#include +#include +#include +#include + +void arch_decomp_setup(void) +{ +} + +static inline void flush(void) +{ + /* + * Wait while the FIFO is not empty + */ + while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) & + UART_SR_TXEMPTY)) + cpu_relax(); +} + +#define arch_decomp_wdog() + +static void putc(char ch) +{ + /* + * Wait for room in the FIFO, then write the char into the FIFO + */ + while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) & + UART_SR_TXFULL) + cpu_relax(); + + __raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET)); +} + +#endif diff --git a/arch/arm/mach-zynq/include/mach/vmalloc.h b/arch/arm/mach-zynq/include/mach/vmalloc.h new file mode 100644 index 000000000000..2398eff1e8b8 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* arch/arm/mach-zynq/include/mach/vmalloc.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_VMALLOC_H__ +#define __MACH_VMALLOC_H__ + +#define VMALLOC_END 0xE0000000UL + +#endif diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h new file mode 100644 index 000000000000..d0d3f8fb06dd --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h @@ -0,0 +1,48 @@ +/* arch/arm/mach-zynq/include/mach/zynq_soc.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_XILINX_SOC_H__ +#define __MACH_XILINX_SOC_H__ + +#define PERIPHERAL_CLOCK_RATE 2500000 + +/* For now, all mappings are flat (physical = virtual) + */ +#define UART0_PHYS 0xE0000000 +#define UART0_VIRT UART0_PHYS + +#define TTC0_PHYS 0xF8001000 +#define TTC0_VIRT TTC0_PHYS + +#define PL310_L2CC_PHYS 0xF8F02000 +#define PL310_L2CC_VIRT PL310_L2CC_PHYS + +#define SCU_PERIPH_PHYS 0xF8F00000 +#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS + +/* The following are intended for the devices that are mapped early */ + +#define TTC0_BASE IOMEM(TTC0_VIRT) +#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT) +#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100) +#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000) +#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT) + +/* + * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical + */ +#define LL_UART_PADDR UART0_PHYS +#define LL_UART_VADDR UART0_VIRT + +#endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c new file mode 100644 index 000000000000..c2c96cc7d6e7 --- /dev/null +++ b/arch/arm/mach-zynq/timer.c @@ -0,0 +1,298 @@ +/* + * This file contains driver for the Xilinx PS Timer Counter IP. + * + * Copyright (C) 2011 Xilinx + * + * based on arch/mips/kernel/time.c timer driver + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include "common.h" + +#define IRQ_TIMERCOUNTER0 42 + +/* + * This driver configures the 2 16-bit count-up timers as follows: + * + * T1: Timer 1, clocksource for generic timekeeping + * T2: Timer 2, clockevent source for hrtimers + * T3: Timer 3, + * + * The input frequency to the timer module for emulation is 2.5MHz which is + * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, + * the timers are clocked at 78.125KHz (12.8 us resolution). + * + * The input frequency to the timer module in silicon will be 200MHz. With the + * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution). + */ +#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */ +#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */ + +#define XTTCPSS_TIMER_BASE TTC0_BASE +#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1) +/* + * Timer Register Offset Definitions of Timer 1, Increment base address by 4 + * and use same offsets for Timer 2 + */ +#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ +#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ +#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ +#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ +#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */ +#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */ +#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */ +#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ +#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ + +#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1 + +/* Setup the timers to use pre-scaling */ + +#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32) + +/** + * struct xttcpss_timer - This definition defines local timer structure + * + * @base_addr: Base address of timer + **/ +struct xttcpss_timer { + void __iomem *base_addr; +}; + +static struct xttcpss_timer timers[2]; +static struct clock_event_device xttcpss_clockevent; + +/** + * xttcpss_set_interval - Set the timer interval value + * + * @timer: Pointer to the timer instance + * @cycles: Timer interval ticks + **/ +static void xttcpss_set_interval(struct xttcpss_timer *timer, + unsigned long cycles) +{ + u32 ctrl_reg; + + /* Disable the counter, set the counter value and re-enable counter */ + ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + + __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET); + + /* Reset the counter (0x10) so that it starts from 0, one-shot + mode makes this needed for timing to be right. */ + ctrl_reg |= 0x10; + ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); +} + +/** + * xttcpss_clock_event_interrupt - Clock event timer interrupt handler + * + * @irq: IRQ number of the Timer + * @dev_id: void pointer to the xttcpss_timer instance + * + * returns: Always IRQ_HANDLED - success + **/ +static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &xttcpss_clockevent; + struct xttcpss_timer *timer = dev_id; + + /* Acknowledge the interrupt and call event handler */ + __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET), + timer->base_addr + XTTCPSS_ISR_OFFSET); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction event_timer_irq = { + .name = "xttcpss clockevent", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = xttcpss_clock_event_interrupt, +}; + +/** + * xttcpss_timer_hardware_init - Initialize the timer hardware + * + * Initialize the hardware to start the clock source, get the clock + * event timer ready to use, and hook up the interrupt. + **/ +static void __init xttcpss_timer_hardware_init(void) +{ + /* Setup the clock source counter to be an incrementing counter + * with no interrupt and it rolls over at 0xFFFF. Pre-scale + it by 32 also. Let it start running now. + */ + timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE; + + __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_IER_OFFSET); + __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + + /* Setup the clock event timer to be an interval timer which + * is prescaled by 32 using the interval interrupt. Leave it + * disabled for now. + */ + + timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4; + + __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_IER_OFFSET); + + /* Setup IRQ the clock event timer */ + event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT]; + setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq); +} + +/** + * __raw_readl_cycles - Reads the timer counter register + * + * returns: Current timer counter register value + **/ +static cycle_t __raw_readl_cycles(struct clocksource *cs) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE]; + + return (cycle_t)__raw_readl(timer->base_addr + + XTTCPSS_COUNT_VAL_OFFSET); +} + + +/* + * Instantiate and initialize the clock source structure + */ +static struct clocksource clocksource_xttcpss = { + .name = "xttcpss_timer1", + .rating = 200, /* Reasonable clock source */ + .read = __raw_readl_cycles, + .mask = CLOCKSOURCE_MASK(16), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + +/** + * xttcpss_set_next_event - Sets the time interval for next event + * + * @cycles: Timer interval ticks + * @evt: Address of clock event instance + * + * returns: Always 0 - success + **/ +static int xttcpss_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + + xttcpss_set_interval(timer, cycles); + return 0; +} + +/** + * xttcpss_set_mode - Sets the mode of timer + * + * @mode: Mode to be set + * @evt: Address of clock event instance + **/ +static void xttcpss_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + u32 ctrl_reg; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + xttcpss_set_interval(timer, TIMER_RATE / HZ); + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + ctrl_reg = __raw_readl(timer->base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + break; + case CLOCK_EVT_MODE_RESUME: + ctrl_reg = __raw_readl(timer->base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + break; + } +} + +/* + * Instantiate and initialize the clock event structure + */ +static struct clock_event_device xttcpss_clockevent = { + .name = "xttcpss_timer2", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = xttcpss_set_next_event, + .set_mode = xttcpss_set_mode, + .rating = 200, +}; + +/** + * xttcpss_timer_init - Initialize the timer + * + * Initializes the timer hardware and register the clock source and clock event + * timers with Linux kernal timer framework + **/ +static void __init xttcpss_timer_init(void) +{ + xttcpss_timer_hardware_init(); + clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE); + + /* Calculate the parameters to allow the clockevent to operate using + integer math + */ + clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4); + + xttcpss_clockevent.max_delta_ns = + clockevent_delta2ns(0xfffe, &xttcpss_clockevent); + xttcpss_clockevent.min_delta_ns = + clockevent_delta2ns(1, &xttcpss_clockevent); + + /* Indicate that clock event is on 1st CPU as SMP boot needs it */ + + xttcpss_clockevent.cpumask = cpumask_of(0); + clockevents_register_device(&xttcpss_clockevent); +} + +/* + * Instantiate and initialize the system timer structure + */ +struct sys_timer xttcpss_sys_timer = { + .init = xttcpss_timer_init, +}; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 0074b8dba793..f0469823faaa 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -821,7 +821,7 @@ config CACHE_L2X0 depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \ ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE + ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || ARCH_ZYNQ default y select OUTER_CACHE select OUTER_CACHE_SYNC -- cgit v1.2.2 From 7a89afa8cfb2cb614d0b8912f19ee98124feeb51 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 14 Feb 2011 12:16:36 +0530 Subject: OMAP3+: SR: make notify independent of class Interrupt notification mechanism of SmartReflex can be used by the choice of implementation of the class driver. For example, Class 2 and Class 1.5 of SmartReflex can both use the interrupt notification to identify the transition of voltage or other events. Hence, the actual class does not matter for notifier. Let the class driver's handling decide how it should be used. SmartReflex driver should provide just the primitives. Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index fb7dc52394a8..3ee726143214 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -143,7 +143,7 @@ static irqreturn_t sr_interrupt(int irq, void *data) sr_write_reg(sr_info, IRQSTATUS, status); } - if (sr_class->class_type == SR_CLASS2 && sr_class->notify) + if (sr_class->notify) sr_class->notify(sr_info->voltdm, status); return IRQ_HANDLED; @@ -258,9 +258,7 @@ static int sr_late_init(struct omap_sr *sr_info) struct resource *mem; int ret = 0; - if (sr_class->class_type == SR_CLASS2 && - sr_class->notify_flags && sr_info->irq) { - + if (sr_class->notify && sr_class->notify_flags && sr_info->irq) { name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); if (name == NULL) { ret = -ENOMEM; -- cgit v1.2.2 From 1279ba5916f6635610c639186be84afaef831fb3 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 14 Feb 2011 12:41:10 +0530 Subject: OMAP3+: SR: disable interrupt by default We will enable and disable interrupt on a need basis in the class driver. We need to keep the IRQ disabled by default else the forceupdate or vcbypass events could trigger events that we don't need/expect to handle. This is a preparation for SmartReflex AVS class drivers such as class 2 and class 1.5 which would need to use interrupts. Existing SmartReflex AVS class 3 driver does not require to use interrupts and is not impacted by this change. Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 3ee726143214..616ef62b3fa5 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -268,6 +268,7 @@ static int sr_late_init(struct omap_sr *sr_info) 0, name, (void *)sr_info); if (ret) goto error; + disable_irq(sr_info->irq); } if (pdata && pdata->enable_on_init) -- cgit v1.2.2 From ac77a6f7a9352d10c4942c24c8fbf61ee54ea196 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 14 Feb 2011 21:14:17 +0530 Subject: OMAP3+: SR: enable/disable SR only on need Since we already know the state of the autocomp enablement, we can see if the requested state is different from the current state and enable/disable SR only on the need basis. Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 616ef62b3fa5..3bd9facd8e0d 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -807,10 +807,13 @@ static int omap_sr_autocomp_store(void *data, u64 val) return -EINVAL; } - if (!val) - sr_stop_vddautocomp(sr_info); - else - sr_start_vddautocomp(sr_info); + /* control enable/disable only if there is a delta in value */ + if (sr_info->autocomp_active != val) { + if (!val) + sr_stop_vddautocomp(sr_info); + else + sr_start_vddautocomp(sr_info); + } return 0; } -- cgit v1.2.2 From 442155adc0989148e800923f4b4b191ce2120c6a Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 14 Feb 2011 12:33:13 +0530 Subject: OMAP3+: SR: fix cosmetic indentation Error label case seems to have a 2 tab indentation when just 1 is necessary. Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 3bd9facd8e0d..2ce2fb7664bc 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -277,16 +277,16 @@ static int sr_late_init(struct omap_sr *sr_info) return ret; error: - iounmap(sr_info->base); - mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - list_del(&sr_info->node); - dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" - "interrupt handler. Smartreflex will" - "not function as desired\n", __func__); - kfree(name); - kfree(sr_info); - return ret; + iounmap(sr_info->base); + mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); + release_mem_region(mem->start, resource_size(mem)); + list_del(&sr_info->node); + dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" + "interrupt handler. Smartreflex will" + "not function as desired\n", __func__); + kfree(name); + kfree(sr_info); + return ret; } static void sr_v1_disable(struct omap_sr *sr) -- cgit v1.2.2 From 3a7b7bdd24286a9cfce9dda5d2b7324dfc2e3b31 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 26 May 2011 14:48:19 -0700 Subject: OMAP3: PM debug: remove sleep_while_idle feature Remove the OMAP-specific PM debug 'sleep_while_idle' feature which is currently available as an OMAP-specific debugfs entry. This duplicates existing ARM-generic functionality available as a boot-time option using the boot cmdline option 'hohlt'. If runtime configuration of this is needed, then adding a debugfs entry for the ARM-generic hlt/nohlt interface should be added. Tested-by: Santosh Shilimkar Acked-by: Santosh Shilimkar Acked-by: Jean Pihet Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 3 --- arch/arm/mach-omap2/pm.h | 2 -- arch/arm/mach-omap2/pm34xx.c | 2 -- 3 files changed, 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index e01da45c0537..d9f08210be31 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -40,7 +40,6 @@ int omap2_pm_debug; u32 enable_off_mode; -u32 sleep_while_idle; u32 wakeup_timer_seconds; u32 wakeup_timer_milliseconds; @@ -639,8 +638,6 @@ static int pm_dbg_init(void) (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d, &enable_off_mode, &pm_dbg_option_fops); - (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d, - &sleep_while_idle, &pm_dbg_option_fops); (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d, &wakeup_timer_seconds, &pm_dbg_option_fops); (void) debugfs_create_file("wakeup_timer_milliseconds", diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 45bcfce77352..674eedcee92c 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -69,13 +69,11 @@ extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds); extern int omap2_pm_debug; extern u32 enable_off_mode; -extern u32 sleep_while_idle; #else #define omap2_pm_dump(mode, resume, us) do {} while (0); #define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0); #define omap2_pm_debug 0 #define enable_off_mode 0 -#define sleep_while_idle 0 #endif #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c155c9d1c82c..cb342447544c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -497,8 +497,6 @@ console_still_active: int omap3_can_sleep(void) { - if (!sleep_while_idle) - return 0; if (!omap_uart_can_sleep()) return 0; return 1; -- cgit v1.2.2 From 20d5d5514981f9a68832bffb27a698545ecba77a Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 26 May 2011 14:07:41 -0700 Subject: OMAP2: PM debug: remove register dumping Tested-by: Santosh Shilimkar Acked-by: Santosh Shilimkar Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 119 ----------------------------------------- arch/arm/mach-omap2/pm.h | 4 -- arch/arm/mach-omap2/pm24xx.c | 6 +-- 3 files changed, 2 insertions(+), 127 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index d9f08210be31..a8425d653ebd 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -38,129 +38,10 @@ #include "prm2xxx_3xxx.h" #include "pm.h" -int omap2_pm_debug; u32 enable_off_mode; u32 wakeup_timer_seconds; u32 wakeup_timer_milliseconds; -#define DUMP_PRM_MOD_REG(mod, reg) \ - regs[reg_count].name = #mod "." #reg; \ - regs[reg_count++].val = omap2_prm_read_mod_reg(mod, reg) -#define DUMP_CM_MOD_REG(mod, reg) \ - regs[reg_count].name = #mod "." #reg; \ - regs[reg_count++].val = omap2_cm_read_mod_reg(mod, reg) -#define DUMP_PRM_REG(reg) \ - regs[reg_count].name = #reg; \ - regs[reg_count++].val = __raw_readl(reg) -#define DUMP_CM_REG(reg) \ - regs[reg_count].name = #reg; \ - regs[reg_count++].val = __raw_readl(reg) -#define DUMP_INTC_REG(reg, off) \ - regs[reg_count].name = #reg; \ - regs[reg_count++].val = \ - __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off))) - -void omap2_pm_dump(int mode, int resume, unsigned int us) -{ - struct reg { - const char *name; - u32 val; - } regs[32]; - int reg_count = 0, i; - const char *s1 = NULL, *s2 = NULL; - - if (!resume) { -#if 0 - /* MPU */ - DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET); - DUMP_CM_MOD_REG(MPU_MOD, OMAP2_CM_CLKSTCTRL); - DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTCTRL); - DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTST); - DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP); -#endif -#if 0 - /* INTC */ - DUMP_INTC_REG(INTC_MIR0, 0x0084); - DUMP_INTC_REG(INTC_MIR1, 0x00a4); - DUMP_INTC_REG(INTC_MIR2, 0x00c4); -#endif -#if 0 - DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1); - if (cpu_is_omap24xx()) { - DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2); - DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, - OMAP2_PRCM_CLKEMUL_CTRL_OFFSET); - DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, - OMAP2_PRCM_CLKSRC_CTRL_OFFSET); - } - DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN); - DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1); - DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2); - DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN); - DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN); - DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE); - DUMP_PRM_MOD_REG(CORE_MOD, OMAP2_PM_PWSTST); -#endif -#if 0 - /* DSP */ - if (cpu_is_omap24xx()) { - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_CM_CLKSTCTRL); - DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTCTRL); - DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTST); - DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTCTRL); - DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTST); - } -#endif - } else { - DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1); - if (cpu_is_omap24xx()) - DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2); - DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST); - DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); -#if 1 - DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098); - DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8); - DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8); -#endif - } - - switch (mode) { - case 0: - s1 = "full"; - s2 = "retention"; - break; - case 1: - s1 = "MPU"; - s2 = "retention"; - break; - case 2: - s1 = "MPU"; - s2 = "idle"; - break; - } - - if (!resume) -#ifdef CONFIG_NO_HZ - printk(KERN_INFO - "--- Going to %s %s (next timer after %u ms)\n", s1, s2, - jiffies_to_msecs(get_next_timer_interrupt(jiffies) - - jiffies)); -#else - printk(KERN_INFO "--- Going to %s %s\n", s1, s2); -#endif - else - printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n", - us / 1000, us % 1000); - - for (i = 0; i < reg_count; i++) - printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); -} - void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) { u32 tick_rate, cycles; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 674eedcee92c..acac27501d4e 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -65,14 +65,10 @@ extern u32 wakeup_timer_milliseconds; extern struct omap_dm_timer *gptimer_wakeup; #ifdef CONFIG_PM_DEBUG -extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds); -extern int omap2_pm_debug; extern u32 enable_off_mode; #else -#define omap2_pm_dump(mode, resume, us) do {} while (0); #define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0); -#define omap2_pm_debug 0 #define enable_off_mode 0 #endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index df3ded6fe194..bf089e743ed9 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -53,6 +53,8 @@ #include "powerdomain.h" #include "clockdomain.h" +static int omap2_pm_debug; + #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state = PM_SUSPEND_ON; static inline bool is_suspending(void) @@ -123,7 +125,6 @@ static void omap2_enter_full_retention(void) omap2_gpio_prepare_for_idle(0); if (omap2_pm_debug) { - omap2_pm_dump(0, 0, 0); getnstimeofday(&ts_preidle); } @@ -160,7 +161,6 @@ no_sleep: getnstimeofday(&ts_postidle); ts_idle = timespec_sub(ts_postidle, ts_preidle); tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; - omap2_pm_dump(0, 1, tmp); } omap2_gpio_resume_after_idle(); @@ -247,7 +247,6 @@ static void omap2_enter_mpu_retention(void) } if (omap2_pm_debug) { - omap2_pm_dump(only_idle ? 2 : 1, 0, 0); getnstimeofday(&ts_preidle); } @@ -259,7 +258,6 @@ static void omap2_enter_mpu_retention(void) getnstimeofday(&ts_postidle); ts_idle = timespec_sub(ts_postidle, ts_preidle); tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; - omap2_pm_dump(only_idle ? 2 : 1, 1, tmp); } } -- cgit v1.2.2 From 9372da5073705fe991f0254baf47f82d491c83ff Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 31 Mar 2011 09:07:20 +0200 Subject: mach-ux500: add HREFv60 Kconfig option This is necessary to have any use of the HREFv60 code. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index f8b9392ee347..96d546cef062 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -20,7 +20,7 @@ config UX500_SOC_DB8500 endmenu -menu "Ux500 target platform" +menu "Ux500 target platform (boards)" config MACH_U8500 bool "U8500 Development platform" @@ -29,6 +29,12 @@ config MACH_U8500 help Include support for the mop500 development platform. +config MACH_HREFV60 + bool "U85000 Development platform, HREFv60 version" + depends on UX500_SOC_DB8500 + help + Include support for the HREFv60 new development platform. + config MACH_U5500 bool "U5500 Development platform" depends on UX500_SOC_DB5500 -- cgit v1.2.2 From f727a05a2c90cfe44749004718bc5a4ef3569b34 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 27 Apr 2011 12:55:37 +0200 Subject: mach-ux500: fix HREFv60 regression This fixes a regression on the HREFv60 ux500 hardware: the wrong level shifter was addressed in the MMCI vdd handler, trying to reconfigure an unclaimed GPIO pin. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 7c6cb4fa47a9..f8b195063b62 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -32,13 +32,32 @@ #define MCI_DATA31DIREN (1 << 5) #define MCI_FBCLKEN (1 << 7) +/* GPIO pins used by the sdi0 level shifter */ +static int sdi0_en = -1; +static int sdi0_vsel = -1; + static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, unsigned char power_mode) { - if (power_mode == MMC_POWER_UP) - gpio_set_value_cansleep(GPIO_SDMMC_EN, 1); - else if (power_mode == MMC_POWER_OFF) - gpio_set_value_cansleep(GPIO_SDMMC_EN, 0); + switch (power_mode) { + case MMC_POWER_UP: + case MMC_POWER_ON: + /* + * Level shifter voltage should depend on vdd to when deciding + * on either 1.8V or 2.9V. Once the decision has been made the + * level shifter must be disabled and re-enabled with a changed + * select signal in order to switch the voltage. Since there is + * no framework support yet for indicating 1.8V in vdd, use the + * default 2.9V. + */ + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 1); + break; + case MMC_POWER_OFF: + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 0); + break; + } return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN | MCI_DATA2DIREN | MCI_DATA31DIREN; @@ -77,10 +96,6 @@ static struct mmci_platform_data mop500_sdi0_data = { #endif }; -/* GPIO pins used by the sdi0 level shifter */ -static int sdi0_en = -1; -static int sdi0_vsel = -1; - static void sdi0_configure(void) { int ret; @@ -210,6 +225,7 @@ void __init mop500_sdi_init(void) sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; sdi0_configure(); } + /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls -- cgit v1.2.2 From 02a734373b998efdcb9d28d8c3aa77e549bb38c0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 30 Mar 2011 16:00:39 +0200 Subject: mach-ux500: correct MMC/SDI parameters We cannot clock the MMCI blocks more than 50 MHz. A bug prevented us from seeing the effect of actually driving them to 100 MHz, which indeed resulted failure, on the external SD card. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index f8b195063b62..5fbd6bc63cb1 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -86,8 +86,10 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi0_data = { .vdd_handler = mop500_sdi0_vdd_handler, .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA, + .f_max = 50000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED, .gpio_wp = -1, #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, @@ -155,7 +157,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, - .f_max = 100000000, + .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -1, .gpio_wp = -1, @@ -192,7 +194,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, + .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, -- cgit v1.2.2 From 451a5edf0ed33f8ca9468ed89dc2a068d09e97be Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 1 Mar 2011 16:09:52 +0100 Subject: mach-ux500: activate USB in the U8500 defconfig Activate the new USB stuff so we atleast get some compile coverage for this stuff. Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index a5cce242a775..e1d602029a4d 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -67,7 +67,11 @@ CONFIG_AB8500_CORE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_GADGET=y +CONFIG_AB8500_USB=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y -- cgit v1.2.2 From db24520f905430bd15eb49b5d9810ed445efe73a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 4 Apr 2011 10:44:51 +0200 Subject: mach-ux500: complete regulator constraints for MOP500 board This board now has complete regulation constraints and can turn off unused regulators. For the moment we need to wire VAUX1 (V-DISPLAY rail) always on since it somehow affects the external MMC. Cc: Liam Girdwood Cc: Mark Brown Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-regulators.c | 9 ++++++++- arch/arm/mach-ux500/board-mop500.c | 3 +++ 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 9ed0f90cfe23..c0bc833df903 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -272,7 +272,14 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .max_uV = 2900000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* must be on for display */ + .boot_on = 1, /* display is on at boot */ + /* + * This voltage cannot be disabled right now because + * it is somehow affecting the external MMC + * functionality, though that typically will use + * AUX3. + */ + .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb26f40493e6..c64d6aa1355c 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -458,6 +458,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") -- cgit v1.2.2 From dd367e9d06d672a549526f2d3b69a36a120b1563 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 9 Jun 2011 11:50:35 +0200 Subject: mach-ux500: iomap PRCMU TCDM memory The PRCMU TCDM memory needs to be iomapped for the PRCMU to work properly. Signed-off-by: Mattias Wallin Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db5500.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index c01bc19e3c5e..22705d246fc7 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -44,6 +44,7 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K), }; static struct resource db5500_pmu_resources[] = { -- cgit v1.2.2 From 58402b6e397555884d926fd22fb40ccf6fe68b46 Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Mon, 20 Jun 2011 13:30:35 +0200 Subject: mach-x500: fix SECTION warnings in uib Fix some simple section warning noise. Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/board-mop500-uib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 69cce41f602a..5af36aa56c08 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -25,7 +25,7 @@ struct uib { void (*init)(void); }; -static struct __initdata uib mop500_uibs[] = { +static struct uib __initdata mop500_uibs[] = { [STUIB] = { .name = "ST-UIB", .option = "stuib", -- cgit v1.2.2 From 350abe0379f8106319f73cbcce37bfa2f0bfa05a Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Mon, 20 Jun 2011 15:55:46 +0200 Subject: mach-ux500: add basic support for snowball board Based on work from Mathieu J. Poirier For more information on snowball please visit http://www.igloocommunity.org Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/board-mop500.c | 154 ++++++++++++++++++++++++++++++++++--- 1 file changed, 145 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index c64d6aa1355c..e3bbb5506dd1 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -26,8 +26,10 @@ #include #include #include +#include #include +#include #include #include @@ -44,6 +46,26 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct gpio_led snowball_led_array[] = { + { + .name = "user_led", + .default_trigger = "none", + .gpio = 142, + }, +}; + +static struct gpio_led_platform_data snowball_led_data = { + .leds = snowball_led_array, + .num_leds = ARRAY_SIZE(snowball_led_array), +}; + +static struct platform_device snowball_led_dev = { + .name = "leds-gpio", + .dev = { + .platform_data = &snowball_led_data, + }, +}; + static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_GPIO(0), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, @@ -66,6 +88,97 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +static struct gpio_keys_button snowball_key_array[] = { + { + .gpio = 32, + .type = EV_KEY, + .code = KEY_1, + .desc = "userpb", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 151, + .type = EV_KEY, + .code = KEY_2, + .desc = "extkb1", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 152, + .type = EV_KEY, + .code = KEY_3, + .desc = "extkb2", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 161, + .type = EV_KEY, + .code = KEY_4, + .desc = "extkb3", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 162, + .type = EV_KEY, + .code = KEY_5, + .desc = "extkb4", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data snowball_key_data = { + .buttons = snowball_key_array, + .nbuttons = ARRAY_SIZE(snowball_key_array), +}; + +static struct platform_device snowball_key_dev = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &snowball_key_data, + } +}; + +static struct smsc911x_platform_config snowball_sbnet_cfg = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .shift = 1, +}; + +static struct resource sbnet_res[] = { + { + .name = "smsc911x-memory", + .start = (0x5000 << 16), + .end = (0x5000 << 16) + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = NOMADIK_GPIO_TO_IRQ(140), + .end = NOMADIK_GPIO_TO_IRQ(140), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device snowball_sbnet_dev = { + .name = "smsc911x", + .num_resources = ARRAY_SIZE(sbnet_res), + .resource = sbnet_res, + .dev = { + .platform_data = &snowball_sbnet_cfg, + }, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator_reg_init = ab8500_regulator_reg_init, @@ -292,8 +405,9 @@ static void mop500_prox_deactivate(struct device *dev) } /* add any platform devices here - TODO */ -static struct platform_device *platform_devs[] __initdata = { +static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -424,6 +538,13 @@ static void __init mop500_uart_init(void) db8500_add_uart2(&uart2_plat); } +static struct platform_device *snowball_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, + &snowball_sbnet_dev, + &ab8500_device, +}; + static void __init mop500_init_machine(void) { int i2c0_devs; @@ -433,24 +554,30 @@ static void __init mop500_init_machine(void) * all these GPIO pins to the internal GPIO controller * instead. */ - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + if (!machine_is_snowball()) { + if (machine_is_hrefv60()) + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + else + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + } u8500_init_devices(); mop500_pins_init(); - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + if (machine_is_snowball()) + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + else + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); - mop500_sdi_init(); + if (!machine_is_snowball()) + mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); - platform_device_register(&ab8500_device); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); if (machine_is_hrefv60()) i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; @@ -480,3 +607,12 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .timer = &ux500_timer, .init_machine = mop500_init_machine, MACHINE_END + +MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .init_machine = mop500_init_machine, +MACHINE_END -- cgit v1.2.2 From d769d05498f78efdc1adff2075b3a58af40dbb76 Mon Sep 17 00:00:00 2001 From: "Mathieu J. Poirier" Date: Fri, 25 Mar 2011 09:28:56 -0600 Subject: mach-ux500: setting proper uart for snowball The UART setting in uncompress.h changes on the Snowball board. Signed-off-by: Mathieu Poirier Signed-off-by: Linus Walleij Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/include/mach/uncompress.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 088b550c40df..7dd08074c37b 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -54,7 +54,8 @@ static inline void arch_decomp_setup(void) if (machine_is_u8500() || machine_is_svp8500v1() || machine_is_svp8500v2() || - machine_is_hrefv60()) + machine_is_hrefv60() || + machine_is_snowball()) ux500_uart_base = U8500_UART2_BASE; else if (machine_is_u5500()) ux500_uart_base = U5500_UART0_BASE; -- cgit v1.2.2 From 885d0fe40fb97d7f394c24ac9c88721015f852b3 Mon Sep 17 00:00:00 2001 From: "Mathieu J. Poirier" Date: Fri, 25 Mar 2011 09:28:58 -0600 Subject: mach-ux500: Add SDI support for snowball board With SDI support for the Snowball we can boot from the SD card. Signed-off-by: Mathieu Poirier Signed-off-by: Linus Walleij Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/board-mop500-sdi.c | 19 ++++++++++++++----- arch/arm/mach-ux500/board-mop500.c | 3 +-- arch/arm/mach-ux500/board-mop500.h | 5 +++++ 3 files changed, 20 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 5fbd6bc63cb1..d0cb9e5eb87c 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -216,15 +216,24 @@ void __init mop500_sdi_init(void) /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data, periphid); + /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */ + if (!machine_is_snowball()) + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, periphid); - if (machine_is_hrefv60()) { - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + if (machine_is_hrefv60() || machine_is_snowball()) { + if (machine_is_hrefv60()) { + mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; + sdi0_en = HREFV60_SDMMC_EN_GPIO; + sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + } else if (machine_is_snowball()) { + mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; + mop500_sdi0_data.cd_invert = true; + sdi0_en = SNOWBALL_SDMMC_EN_GPIO; + sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; + } sdi0_configure(); } diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index e3bbb5506dd1..4eead1a0786b 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -573,8 +573,7 @@ static void __init mop500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); - if (!machine_is_snowball()) - mop500_sdi_init(); + mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 03a31cc9b084..ee77a8970c33 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,6 +7,11 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H +/* snowball GPIO for MMC card */ +#define SNOWBALL_SDMMC_EN_GPIO 217 +#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 +#define SNOWBALL_SDMMC_CD_GPIO 218 + /* HREFv60-specific GPIO assignments, this board has no GPIO expander */ #define HREFV60_TOUCH_RST_GPIO 143 #define HREFV60_PROX_SENSE_GPIO 217 -- cgit v1.2.2 From c41fac8aa9cb9ca31a5b3d9ce1f3b0026b83c16d Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Tue, 21 Jun 2011 09:39:13 +0200 Subject: mach-ux500: Add pin configuration for snowball board This sets up a few GPIO pins and some pinmuxing on platform boot for the Snowball board. Based on work from Mathieu J. Poirier . Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/board-mop500-pins.c | 43 +++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index fd4cf1ca5efd..7013d003b8fd 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -228,6 +228,46 @@ static pin_cfg_t mop500_pins_hrefv60[] = { }; +static pin_cfg_t snowball_pins[] = { + /* SSP0, to AB8500 */ + GPIO143_SSP0_CLK, + GPIO144_SSP0_FRM, + GPIO145_SSP0_RXD | PIN_PULL_DOWN, + GPIO146_SSP0_TXD, + + /* MMC0: MicroSD card */ + GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, + + /* MMC2: LAN */ + GPIO86_SM_ADQ0, + GPIO87_SM_ADQ1, + GPIO88_SM_ADQ2, + GPIO89_SM_ADQ3, + GPIO90_SM_ADQ4, + GPIO91_SM_ADQ5, + GPIO92_SM_ADQ6, + GPIO93_SM_ADQ7, + + GPIO94_SM_ADVn, + GPIO95_SM_CS0n, + GPIO96_SM_OEn, + GPIO97_SM_WEn, + + GPIO128_SM_CKO, + GPIO130_SM_FBCLK, + GPIO131_SM_ADQ8, + GPIO132_SM_ADQ9, + GPIO133_SM_ADQ10, + GPIO134_SM_ADQ11, + GPIO135_SM_ADQ12, + GPIO136_SM_ADQ13, + GPIO137_SM_ADQ14, + GPIO138_SM_ADQ15, + + /* RSTn_LAN */ + GPIO141_GPIO | PIN_OUTPUT_HIGH, +}; + void __init mop500_pins_init(void) { nmk_config_pins(mop500_pins_common, @@ -235,6 +275,9 @@ void __init mop500_pins_init(void) if (machine_is_hrefv60()) nmk_config_pins(mop500_pins_hrefv60, ARRAY_SIZE(mop500_pins_hrefv60)); + else if (machine_is_snowball()) + nmk_config_pins(snowball_pins, + ARRAY_SIZE(snowball_pins)); else nmk_config_pins(mop500_pins_default, ARRAY_SIZE(mop500_pins_default)); -- cgit v1.2.2 From 11ab32a734f5ee5d4f4f27f3488b0099447a2dbf Mon Sep 17 00:00:00 2001 From: "Mathieu J. Poirier" Date: Fri, 25 Mar 2011 09:29:01 -0600 Subject: mach-ux500: Kconfig for snowball board This adds the necessary Kconfig entry for a Snowball board. Signed-off-by: Mathieu Poirier Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 96d546cef062..4210cb434dbc 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -35,6 +35,13 @@ config MACH_HREFV60 help Include support for the HREFv60 new development platform. +config MACH_SNOWBALL + bool "U8500 Snowball platform" + depends on UX500_SOC_DB8500 + select MACH_U8500 + help + Include support for the snowball development platform. + config MACH_U5500 bool "U5500 Development platform" depends on UX500_SOC_DB5500 -- cgit v1.2.2 From c5314877edd2ea9cccca0ca87c9a439a8d356c14 Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Tue, 21 Jun 2011 14:01:02 +0200 Subject: mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund --- arch/arm/configs/u8500_defconfig | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index e1d602029a4d..97d31a4663da 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -11,12 +11,12 @@ CONFIG_ARCH_U8500=y CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_U8500=y +CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_HOTPLUG_CPU=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" @@ -25,8 +25,13 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_NETFILTER=y CONFIG_PHONET=y -CONFIG_PHONET_PIPECTRLR=y # CONFIG_WIRELESS is not set CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" @@ -35,6 +40,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y +CONFIG_NETDEVICES=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -49,9 +61,9 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y CONFIG_I2C=y @@ -64,7 +76,6 @@ CONFIG_GPIO_TC3589X=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB8500_CORE=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_MUSB_HDRC=y @@ -73,9 +84,11 @@ CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y @@ -83,7 +96,6 @@ CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y @@ -95,6 +107,8 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CONFIGFS_FS=m # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y @@ -103,7 +117,5 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -- cgit v1.2.2 From cde21de148a5bf474bbde59ebf046992fab3c77b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 30 May 2011 15:51:47 +0200 Subject: mach-u300: cleanup clockevent code Use the new clockevents_config_and_register() function to register the U300 clockevent, since that code requires ->cpumask to be set we set this even on this UP system to please the framework. Cc: Thomas Gleixner Signed-off-by: Linus Walleij --- arch/arm/mach-u300/timer.c | 33 ++++++++++++--------------------- 1 file changed, 12 insertions(+), 21 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 18d7fa0603c2..5f51bdeef0ef 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -27,9 +27,6 @@ #include #include -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define APPTIMER_MIN_RANGE 4 - /* * APP side special timer registers * This timer contains four timers which can fire an interrupt each. @@ -309,11 +306,11 @@ static int u300_set_next_event(unsigned long cycles, /* Use general purpose timer 1 as clock event */ static struct clock_event_device clockevent_u300_1mhz = { - .name = "GPT1", - .rating = 300, /* Reasonably fast and accurate clock event */ - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = u300_set_next_event, - .set_mode = u300_set_mode, + .name = "GPT1", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = u300_set_next_event, + .set_mode = u300_set_mode, }; /* Clock event timer interrupt handler */ @@ -328,9 +325,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) } static struct irqaction u300_timer_irq = { - .name = "U300 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = u300_timer_interrupt, + .name = "U300 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = u300_timer_interrupt, }; /* @@ -413,16 +410,10 @@ static void __init u300_timer_init(void) "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) pr_err("timer: failed to initialize U300 clock source\n"); - clockevents_calc_mult_shift(&clockevent_u300_1mhz, - rate, APPTIMER_MIN_RANGE); - /* 32bit counter, so 32bits delta is max */ - clockevent_u300_1mhz.max_delta_ns = - clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz); - /* This timer is slow enough to set for 1 cycle == 1 MHz */ - clockevent_u300_1mhz.min_delta_ns = - clockevent_delta2ns(1, &clockevent_u300_1mhz); - clockevent_u300_1mhz.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_u300_1mhz); + /* Configure and register the clockevent */ + clockevents_config_and_register(&clockevent_u300_1mhz, rate, + 1, 0xffffffff); + /* * TODO: init and register the rest of the timers too, they can be * used by hrtimers! -- cgit v1.2.2 From 32d55ff91635c22dc853c532ec85dc16663d251f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jun 2011 09:28:28 +0200 Subject: mach-u300: set apropriate FIFO trigger levels The U300 just defined the fill level limits for the FIFOs to 1 item out of habit. It can easily handle four. Signed-off-by: Linus Walleij --- arch/arm/mach-u300/spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 5767208f1c1d..7b597e2b19e2 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -40,8 +40,8 @@ struct pl022_config_chip dummy_chip_info = { .hierarchy = SSP_MASTER, /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, -- cgit v1.2.2 From ef7a474cef00594ccef432ce0840464e51ea4ac0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Jun 2011 14:44:16 +0200 Subject: mach-ux500: register a clock for the SMP TWD The SMP TWD on the ux500 will change frequency at the same time as the CPU. Loop back the frequency presented from the CPU into a clock that is looked up by the SMP TWD driver with the new cpufreq notifier hook. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/clock.c | 48 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 32ce90840ee1..b4e786a0fa4f 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -759,6 +760,51 @@ err_out: late_initcall(clk_debugfs_init); #endif /* defined(CONFIG_DEBUG_FS) */ +unsigned long clk_smp_twd_rate = 400000000; + +unsigned long clk_smp_twd_get_rate(struct clk *clk) +{ + return clk_smp_twd_rate; +} + +static struct clk clk_smp_twd = { + .get_rate = clk_smp_twd_get_rate, + .name = "smp_twd", +}; + +static struct clk_lookup clk_smp_twd_lookup = { + .dev_id = "smp_twd", + .clk = &clk_smp_twd, +}; + +#ifdef CONFIG_CPU_FREQ + +static int clk_twd_cpufreq_transition(struct notifier_block *nb, + unsigned long state, void *data) +{ + struct cpufreq_freqs *f = data; + + if (state == CPUFREQ_PRECHANGE) { + /* Save frequency in simple Hz */ + clk_smp_twd_rate = f->new * 1000; + } + + return NOTIFY_OK; +} + +static struct notifier_block clk_twd_cpufreq_nb = { + .notifier_call = clk_twd_cpufreq_transition, +}; + +static int clk_init_smp_twd_cpufreq(void) +{ + return cpufreq_register_notifier(&clk_twd_cpufreq_nb, + CPUFREQ_TRANSITION_NOTIFIER); +} +late_initcall(clk_init_smp_twd_cpufreq); + +#endif + int __init clk_init(void) { if (cpu_is_u8500ed()) { @@ -779,6 +825,8 @@ int __init clk_init(void) else clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + clkdev_add(&clk_smp_twd_lookup); + #ifdef CONFIG_DEBUG_FS clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); if (cpu_is_u8500ed()) -- cgit v1.2.2 From 7c9d440e90c09c6c7b5c477217e491484d044353 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 23 Jun 2011 11:39:20 -0700 Subject: treewide: transciever/transceiver spelling fixes Just tyops. Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina --- arch/arm/mach-pxa/include/mach/corgi.h | 2 +- arch/arm/mach-pxa/include/mach/pxa27x-udc.h | 4 ++-- arch/arm/mach-ux500/board-mop500-regulators.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 0011055bc3f9..5dfd1195a5a7 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -34,7 +34,7 @@ #define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */ #define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */ #define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */ -#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */ +#define CORGI_GPIO_IR_ON (22) /* Enable IR Transceiver */ #define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */ #define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */ #define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h index ab1443f8bd89..4cf28f670706 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h @@ -56,9 +56,9 @@ #define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ #define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ #define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt Falling Edge Interrupt Enable */ #define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */ diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 9ed0f90cfe23..0f2e522f387d 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -77,7 +77,7 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { /* SoC core supply, no device */ REGULATOR_SUPPLY("v-intcore", NULL), - /* USB Transciever */ + /* USB Transceiver */ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), }; -- cgit v1.2.2 From 59bec58373bc8324a2ee7d7355fe8499c8f6f602 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 26 May 2011 15:34:39 -0700 Subject: OMAP3: PM debug: remove register dumping Remove OMAP3-specific register dumping feature from PM debug layer. This is removed because: - it's ugly - it's OMAP3-specific, and will obviously not scale to OMAP4+ - userspace /dev/mem-based tools (like omapconf) can do this much better Tested-by: Santosh Shilimkar Acked-by: Santosh Shilimkar Acked-by: Jean Pihet Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 221 ----------------------------------------- arch/arm/mach-omap2/pm.h | 4 - 2 files changed, 225 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index a8425d653ebd..3d1cce280e24 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -63,10 +63,6 @@ void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) #include #include -static void pm_dbg_regset_store(u32 *ptr); - -static struct dentry *pm_dbg_dir; - static int pm_dbg_init_done; static int pm_dbg_init(void); @@ -76,160 +72,6 @@ enum { DEBUG_FILE_TIMERS, }; -struct pm_module_def { - char name[8]; /* Name of the module */ - short type; /* CM or PRM */ - unsigned short offset; - int low; /* First register address on this module */ - int high; /* Last register address on this module */ -}; - -#define MOD_CM 0 -#define MOD_PRM 1 - -static const struct pm_module_def *pm_dbg_reg_modules; -static const struct pm_module_def omap3_pm_reg_modules[] = { - { "IVA2", MOD_CM, OMAP3430_IVA2_MOD, 0, 0x4c }, - { "OCP", MOD_CM, OCP_MOD, 0, 0x10 }, - { "MPU", MOD_CM, MPU_MOD, 4, 0x4c }, - { "CORE", MOD_CM, CORE_MOD, 0, 0x4c }, - { "SGX", MOD_CM, OMAP3430ES2_SGX_MOD, 0, 0x4c }, - { "WKUP", MOD_CM, WKUP_MOD, 0, 0x40 }, - { "CCR", MOD_CM, PLL_MOD, 0, 0x70 }, - { "DSS", MOD_CM, OMAP3430_DSS_MOD, 0, 0x4c }, - { "CAM", MOD_CM, OMAP3430_CAM_MOD, 0, 0x4c }, - { "PER", MOD_CM, OMAP3430_PER_MOD, 0, 0x4c }, - { "EMU", MOD_CM, OMAP3430_EMU_MOD, 0x40, 0x54 }, - { "NEON", MOD_CM, OMAP3430_NEON_MOD, 0x20, 0x48 }, - { "USB", MOD_CM, OMAP3430ES2_USBHOST_MOD, 0, 0x4c }, - - { "IVA2", MOD_PRM, OMAP3430_IVA2_MOD, 0x50, 0xfc }, - { "OCP", MOD_PRM, OCP_MOD, 4, 0x1c }, - { "MPU", MOD_PRM, MPU_MOD, 0x58, 0xe8 }, - { "CORE", MOD_PRM, CORE_MOD, 0x58, 0xf8 }, - { "SGX", MOD_PRM, OMAP3430ES2_SGX_MOD, 0x58, 0xe8 }, - { "WKUP", MOD_PRM, WKUP_MOD, 0xa0, 0xb0 }, - { "CCR", MOD_PRM, PLL_MOD, 0x40, 0x70 }, - { "DSS", MOD_PRM, OMAP3430_DSS_MOD, 0x58, 0xe8 }, - { "CAM", MOD_PRM, OMAP3430_CAM_MOD, 0x58, 0xe8 }, - { "PER", MOD_PRM, OMAP3430_PER_MOD, 0x58, 0xe8 }, - { "EMU", MOD_PRM, OMAP3430_EMU_MOD, 0x58, 0xe4 }, - { "GLBL", MOD_PRM, OMAP3430_GR_MOD, 0x20, 0xe4 }, - { "NEON", MOD_PRM, OMAP3430_NEON_MOD, 0x58, 0xe8 }, - { "USB", MOD_PRM, OMAP3430ES2_USBHOST_MOD, 0x58, 0xe8 }, - { "", 0, 0, 0, 0 }, -}; - -#define PM_DBG_MAX_REG_SETS 4 - -static void *pm_dbg_reg_set[PM_DBG_MAX_REG_SETS]; - -static int pm_dbg_get_regset_size(void) -{ - static int regset_size; - - if (regset_size == 0) { - int i = 0; - - while (pm_dbg_reg_modules[i].name[0] != 0) { - regset_size += pm_dbg_reg_modules[i].high + - 4 - pm_dbg_reg_modules[i].low; - i++; - } - } - return regset_size; -} - -static int pm_dbg_show_regs(struct seq_file *s, void *unused) -{ - int i, j; - unsigned long val; - int reg_set = (int)s->private; - u32 *ptr; - void *store = NULL; - int regs; - int linefeed; - - if (reg_set == 0) { - store = kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL); - ptr = store; - pm_dbg_regset_store(ptr); - } else { - ptr = pm_dbg_reg_set[reg_set - 1]; - } - - i = 0; - - while (pm_dbg_reg_modules[i].name[0] != 0) { - regs = 0; - linefeed = 0; - if (pm_dbg_reg_modules[i].type == MOD_CM) - seq_printf(s, "MOD: CM_%s (%08x)\n", - pm_dbg_reg_modules[i].name, - (u32)(OMAP3430_CM_BASE + - pm_dbg_reg_modules[i].offset)); - else - seq_printf(s, "MOD: PRM_%s (%08x)\n", - pm_dbg_reg_modules[i].name, - (u32)(OMAP3430_PRM_BASE + - pm_dbg_reg_modules[i].offset)); - - for (j = pm_dbg_reg_modules[i].low; - j <= pm_dbg_reg_modules[i].high; j += 4) { - val = *(ptr++); - if (val != 0) { - regs++; - if (linefeed) { - seq_printf(s, "\n"); - linefeed = 0; - } - seq_printf(s, " %02x => %08lx", j, val); - if (regs % 4 == 0) - linefeed = 1; - } - } - seq_printf(s, "\n"); - i++; - } - - if (store != NULL) - kfree(store); - - return 0; -} - -static void pm_dbg_regset_store(u32 *ptr) -{ - int i, j; - u32 val; - - i = 0; - - while (pm_dbg_reg_modules[i].name[0] != 0) { - for (j = pm_dbg_reg_modules[i].low; - j <= pm_dbg_reg_modules[i].high; j += 4) { - if (pm_dbg_reg_modules[i].type == MOD_CM) - val = omap2_cm_read_mod_reg( - pm_dbg_reg_modules[i].offset, j); - else - val = omap2_prm_read_mod_reg( - pm_dbg_reg_modules[i].offset, j); - *(ptr++) = val; - } - i++; - } -} - -int pm_dbg_regset_save(int reg_set) -{ - if (pm_dbg_reg_set[reg_set-1] == NULL) - return -EINVAL; - - pm_dbg_regset_store(pm_dbg_reg_set[reg_set-1]); - - return 0; -} - static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { "OFF", "RET", @@ -349,11 +191,6 @@ static int pm_dbg_open(struct inode *inode, struct file *file) }; } -static int pm_dbg_reg_open(struct inode *inode, struct file *file) -{ - return single_open(file, pm_dbg_show_regs, inode->i_private); -} - static const struct file_operations debug_fops = { .open = pm_dbg_open, .read = seq_read, @@ -361,40 +198,6 @@ static const struct file_operations debug_fops = { .release = single_release, }; -static const struct file_operations debug_reg_fops = { - .open = pm_dbg_reg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -int pm_dbg_regset_init(int reg_set) -{ - char name[2]; - - if (!pm_dbg_init_done) - pm_dbg_init(); - - if (reg_set < 1 || reg_set > PM_DBG_MAX_REG_SETS || - pm_dbg_reg_set[reg_set-1] != NULL) - return -EINVAL; - - pm_dbg_reg_set[reg_set-1] = - kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL); - - if (pm_dbg_reg_set[reg_set-1] == NULL) - return -ENOMEM; - - if (pm_dbg_dir != NULL) { - sprintf(name, "%d", reg_set); - - (void) debugfs_create_file(name, S_IRUGO, - pm_dbg_dir, (void *)reg_set, &debug_reg_fops); - } - - return 0; -} - static int pwrdm_suspend_get(void *data, u64 *val) { int ret = -EINVAL; @@ -477,20 +280,11 @@ DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); static int pm_dbg_init(void) { - int i; struct dentry *d; - char name[2]; if (pm_dbg_init_done) return 0; - if (cpu_is_omap34xx()) - pm_dbg_reg_modules = omap3_pm_reg_modules; - else { - printk(KERN_ERR "%s: only OMAP3 supported\n", __func__); - return -ENODEV; - } - d = debugfs_create_dir("pm_debug", NULL); if (IS_ERR(d)) return PTR_ERR(d); @@ -502,21 +296,6 @@ static int pm_dbg_init(void) pwrdm_for_each(pwrdms_setup, (void *)d); - pm_dbg_dir = debugfs_create_dir("registers", d); - if (IS_ERR(pm_dbg_dir)) - return PTR_ERR(pm_dbg_dir); - - (void) debugfs_create_file("current", S_IRUGO, - pm_dbg_dir, (void *)0, &debug_reg_fops); - - for (i = 0; i < PM_DBG_MAX_REG_SETS; i++) - if (pm_dbg_reg_set[i] != NULL) { - sprintf(name, "%d", i+1); - (void) debugfs_create_file(name, S_IRUGO, - pm_dbg_dir, (void *)(i+1), &debug_reg_fops); - - } - (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d, &enable_off_mode, &pm_dbg_option_fops); (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d, diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index acac27501d4e..ea58f5dd2400 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -74,12 +74,8 @@ extern u32 enable_off_mode; #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev); -extern int pm_dbg_regset_save(int reg_set); -extern int pm_dbg_regset_init(int reg_set); #else #define pm_dbg_update_time(pwrdm, prev) do {} while (0); -#define pm_dbg_regset_save(reg_set) do {} while (0); -#define pm_dbg_regset_init(reg_set) do {} while (0); #endif /* CONFIG_PM_DEBUG */ extern void omap24xx_idle_loop_suspend(void); -- cgit v1.2.2 From ec3cdb5baedf6bb3852c531426c1e95a13671dff Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Fri, 17 Jun 2011 02:01:00 +0530 Subject: OMAP2+: PM: fix section mismatch in pm_dbg_init() Fix the section mismatch warning: WARNING: vmlinux.o(.text+0x21118): Section mismatch in reference from the function pm_dbg_init() to the function .init.text:pwrdms_setup() The function pm_dbg_init() references the function __init pwrdms_setup(). This is often because pm_dbg_init lacks a __init annotation or the annotation of pwrdms_setup is wrong. Signed-off-by: Sanjeev Premi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 3d1cce280e24..3feb475bd14d 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -278,7 +278,7 @@ static int option_set(void *data, u64 val) DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); -static int pm_dbg_init(void) +static int __init pm_dbg_init(void) { struct dentry *d; -- cgit v1.2.2 From fc5070b527b8243e9f4369e4e79ab431a5a1cb79 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 27 Jun 2011 18:19:30 +0200 Subject: mach-ux500: fix USB build error The mach-ux500/usb.c was referencing DMA macros, but not including so it didn't compile. Fixed by a proper #include. Cc: Arnd Bergmann Cc: Mian Yousaf Kaukab Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/mach-ux500/usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 82e535953fd9..0a01cbdfe063 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -6,6 +6,7 @@ */ #include #include +#include #include #include #include -- cgit v1.2.2 From 11a0186f3ef6aa6a9b8b81f5a501b6063fa47500 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 29 Mar 2011 15:54:49 -0700 Subject: omap2+: Reserve clocksource and timesource and initialize dmtimer later There's no need to initialize the dmtimer framework early. Just mark the clocksource and timesource as reserved, and initialize dmtimer with an arch_initcall. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/mach-omap1/timer32k.c | 4 ---- arch/arm/mach-omap2/timer-gp.c | 6 ++++-- arch/arm/plat-omap/dmtimer.c | 10 +++++++++- arch/arm/plat-omap/include/plat/dmtimer.h | 3 +-- 4 files changed, 14 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 13d7b8f145bd..96604a50c4fe 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -183,10 +183,6 @@ static __init void omap_init_32k_timer(void) bool __init omap_32k_timer_init(void) { omap_init_clocksource_32k(); - -#ifdef CONFIG_OMAP_DM_TIMER - omap_dm_timer_init(); -#endif omap_init_32k_timer(); return true; diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 578e9df4fdea..cf2ec85b95fa 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -69,6 +69,8 @@ /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 +u32 sys_timer_reserved; + /* Clockevent code */ static struct omap_dm_timer clkev; @@ -195,6 +197,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, omap_hwmod_enable(oh); + sys_timer_reserved |= (1 << (gptimer_id - 1)); + if (gptimer_id != 12) { struct clk *src; @@ -321,7 +325,6 @@ static void __init omap2_gp_clocksource_init(void) #define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src) \ static void __init omap##name##_timer_init(void) \ { \ - omap_dm_timer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src); \ omap2_gp_clocksource_init(); \ } @@ -350,7 +353,6 @@ static void __init omap4_timer_init(void) twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); BUG_ON(!twd_base); #endif - omap_dm_timer_init(); omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); omap2_gp_clocksource_init(); } diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 7c5cb4e128f2..8dfb8186b2c2 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -572,7 +572,7 @@ int omap_dm_timers_active(void) } EXPORT_SYMBOL_GPL(omap_dm_timers_active); -int __init omap_dm_timer_init(void) +static int __init omap_dm_timer_init(void) { struct omap_dm_timer *timer; int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ @@ -625,8 +625,16 @@ int __init omap_dm_timer_init(void) sprintf(clk_name, "gpt%d_fck", i + 1); timer->fclk = clk_get(NULL, clk_name); } + + /* One or two timers may be set up early for sys_timer */ + if (sys_timer_reserved & (1 << i)) { + timer->reserved = 1; + timer->posted = 1; + } #endif } return 0; } + +arch_initcall(omap_dm_timer_init); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 8adcb187fe71..d0f3a2d22fd3 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -61,8 +61,6 @@ struct omap_dm_timer; struct clk; -int omap_dm_timer_init(void); - struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); void omap_dm_timer_free(struct omap_dm_timer *timer); @@ -221,6 +219,7 @@ struct omap_dm_timer { unsigned posted:1; }; +extern u32 sys_timer_reserved; void omap_dm_timer_prepare(struct omap_dm_timer *timer); static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg, -- cgit v1.2.2 From 3d05a3e80c44cb792fc8194fd9abdb431dea5420 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 29 Mar 2011 15:54:49 -0700 Subject: omap2+: Use dmtimer macros for clocksource Use dmtimer macros for clocksource. As with the clockevent, this allows us to initialize the rest of dmtimer code later on. Note that eventually we will be initializing the timesource from init_early so sched_clock will work properly for CONFIG_PRINTK_TIME. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/mach-omap2/timer-gp.c | 64 ++++++++++++++++++++++------------------ arch/arm/plat-omap/counter_32k.c | 2 +- 2 files changed, 37 insertions(+), 29 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index cf2ec85b95fa..2b8cb701c89f 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -262,20 +262,22 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, * sync counter. See clocksource setup in plat-omap/counter_32k.c */ -static void __init omap2_gp_clocksource_init(void) +static void __init omap2_gp_clocksource_init(int unused, const char *dummy) { omap_init_clocksource_32k(); } #else + +static struct omap_dm_timer clksrc; + /* * clocksource */ static DEFINE_CLOCK_DATA(cd); -static struct omap_dm_timer *gpt_clocksource; static cycle_t clocksource_read_cycles(struct clocksource *cs) { - return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource); + return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1); } static struct clocksource clocksource_gpt = { @@ -290,43 +292,48 @@ static void notrace dmtimer_update_sched_clock(void) { u32 cyc; - cyc = omap_dm_timer_read_counter(gpt_clocksource); + cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1); update_sched_clock(&cd, cyc, (u32)~0); } -/* Setup free-running counter for clocksource */ -static void __init omap2_gp_clocksource_init(void) +unsigned long long notrace sched_clock(void) { - static struct omap_dm_timer *gpt; - u32 tick_rate; - static char err1[] __initdata = KERN_ERR - "%s: failed to request dm-timer\n"; - static char err2[] __initdata = KERN_ERR - "%s: can't register clocksource!\n"; + u32 cyc = 0; - gpt = omap_dm_timer_request(); - if (!gpt) - printk(err1, clocksource_gpt.name); - gpt_clocksource = gpt; + if (clksrc.reserved) + cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1); - omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK); - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt)); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +/* Setup free-running counter for clocksource */ +static void __init omap2_gp_clocksource_init(int gptimer_id, + const char *fck_source) +{ + int res; + + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + BUG_ON(res); - omap_dm_timer_set_load_start(gpt, 1, 0); + pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", + gptimer_id, clksrc.rate); - init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate); + __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1); + init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); - if (clocksource_register_hz(&clocksource_gpt, tick_rate)) - printk(err2, clocksource_gpt.name); + if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) + pr_err("Could not register clocksource %s\n", + clocksource_gpt.name); } #endif -#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src) \ +#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ + clksrc_nr, clksrc_src) \ static void __init omap##name##_timer_init(void) \ { \ omap2_gp_clockevent_init((clkev_nr), clkev_src); \ - omap2_gp_clocksource_init(); \ + omap2_gp_clocksource_init((clksrc_nr), clksrc_src); \ } #define OMAP_SYS_TIMER(name) \ @@ -335,14 +342,15 @@ struct sys_timer omap##name##_timer = { \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE) +OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) OMAP_SYS_TIMER(2) #endif #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE) +OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) OMAP_SYS_TIMER(3) -OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE) +OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, + 2, OMAP3_MPU_SOURCE) OMAP_SYS_TIMER(3_secure) #endif @@ -354,7 +362,7 @@ static void __init omap4_timer_init(void) BUG_ON(!twd_base); #endif omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_gp_clocksource_init(); + omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE); } OMAP_SYS_TIMER(4) #endif diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index f7fed6080190..c13bc3d3eb2c 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -126,7 +126,7 @@ static inline unsigned long long notrace _omap_32k_sched_clock(void) return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); } -#ifndef CONFIG_OMAP_MPU_TIMER +#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER) unsigned long long notrace sched_clock(void) { return _omap_32k_sched_clock(); -- cgit v1.2.2 From 0c336dc5ec492886620d4afdc252c63f32adbd0e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 29 Mar 2011 15:54:49 -0700 Subject: omap2+: Remove omap2_gp_clockevent_set_gptimer This is no longer needed as we now just set the desired .timer in MACHINE_START. We can now also remove timer-gp.h. Signed-off-by: Tony Lindgren Reviewed-by: Kevin Hilman --- arch/arm/mach-omap2/board-4430sdp.c | 4 ---- arch/arm/mach-omap2/board-devkit8000.c | 4 ---- arch/arm/mach-omap2/board-omap3beagle.c | 4 ---- arch/arm/mach-omap2/board-omap3logic.c | 1 - arch/arm/mach-omap2/board-omap3stalker.c | 4 ---- arch/arm/mach-omap2/board-omap3touchbook.c | 4 ---- arch/arm/mach-omap2/board-omap4panda.c | 1 - arch/arm/mach-omap2/timer-gp.c | 26 -------------------------- arch/arm/mach-omap2/timer-gp.h | 16 ---------------- 9 files changed, 64 deletions(-) delete mode 100644 arch/arm/mach-omap2/timer-gp.h (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 128efb50215c..f88505a4f21a 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -40,7 +40,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "control.h" #include "common-board-devices.h" @@ -295,9 +294,6 @@ static void __init omap_4430sdp_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(1); -#endif } static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 671aaeade116..360ba7bba687 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -58,7 +58,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #define OMAP_DM9000_GPIO_IRQ 25 @@ -439,9 +438,6 @@ static void __init devkit8000_init_early(void) static void __init devkit8000_init_irq(void) { omap3_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif } #define OMAP_DM9000_BASE 0x2c000000 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 3d416549936a..5a830dfe2ad9 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -50,7 +50,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "pm.h" #include "common-board-devices.h" @@ -487,9 +486,6 @@ static void __init omap3_beagle_init_early(void) static void __init omap3_beagle_init_irq(void) { omap3_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif } static struct platform_device *omap3_beagle_devices[] __initdata = { diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 693eba1d4f7d..8e67567ad10f 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -35,7 +35,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "control.h" #include "common-board-devices.h" diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 96fec1f8fca1..c8e53d0b6b45 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -52,7 +52,6 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) @@ -495,9 +494,6 @@ static void __init omap3_stalker_init_early(void) static void __init omap3_stalker_init_irq(void) { omap3_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif } static struct platform_device *omap3_stalker_devices[] __initdata = { diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 9447bc06d0d0..729565c0feac 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -51,7 +51,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #include @@ -372,9 +371,6 @@ static void __init omap3_touchbook_init_early(void) static void __init omap3_touchbook_init_irq(void) { omap3_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif } static struct platform_device *omap3_touchbook_devices[] __initdata = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e76fe98a0bbe..f106489bb76f 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -41,7 +41,6 @@ #include #include #include