From 6c6971dc4e8c23bb61bf309898e1693f9c5c8c24 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 29 Jan 2010 09:02:16 +0000 Subject: ARM: SAMSUNG: Move the last build from plat-s3c to plat-samsung Move the init.c and time.c files to plat-samsung from plat-s3c, thus clearing the last files that are being built in here. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/Makefile | 4 +- arch/arm/plat-s3c/init.c | 160 ------------------------- arch/arm/plat-s3c/time.c | 285 --------------------------------------------- 3 files changed, 1 insertion(+), 448 deletions(-) delete mode 100644 arch/arm/plat-s3c/init.c delete mode 100644 arch/arm/plat-s3c/time.c (limited to 'arch/arm/plat-s3c') diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 2a3c4a49117a..867c9cf755a7 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -6,10 +6,8 @@ obj-y := obj-m := -obj-n := +obj-n := dummy.o obj- := # Core support for all Samsung SoCs -obj-y += init.o -obj-y += time.o diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-s3c/init.c deleted file mode 100644 index 6790edfaca6f..000000000000 --- a/arch/arm/plat-s3c/init.c +++ /dev/null @@ -1,160 +0,0 @@ -/* linux/arch/arm/plat-s3c/init.c - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C series CPU initialisation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include -#include -#include - -#include - -static struct cpu_table *cpu; - -static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, - struct cpu_table *tab, - unsigned int count) -{ - for (; count != 0; count--, tab++) { - if ((idcode & tab->idmask) == tab->idcode) - return tab; - } - - return NULL; -} - -void __init s3c_init_cpu(unsigned long idcode, - struct cpu_table *cputab, unsigned int cputab_size) -{ - cpu = s3c_lookup_cpu(idcode, cputab, cputab_size); - - if (cpu == NULL) { - printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); - panic("Unknown S3C24XX CPU"); - } - - printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); - - if (cpu->map_io == NULL || cpu->init == NULL) { - printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); - panic("Unsupported Samsung CPU"); - } - - cpu->map_io(); -} - -/* s3c24xx_init_clocks - * - * Initialise the clock subsystem and associated information from the - * given master crystal value. - * - * xtal = 0 -> use default PLL crystal value (normally 12MHz) - * != 0 -> PLL crystal value in Hz -*/ - -void __init s3c24xx_init_clocks(int xtal) -{ - if (xtal == 0) - xtal = 12*1000*1000; - - if (cpu == NULL) - panic("s3c24xx_init_clocks: no cpu setup?\n"); - - if (cpu->init_clocks == NULL) - panic("s3c24xx_init_clocks: cpu has no clock init\n"); - else - (cpu->init_clocks)(xtal); -} - -/* uart management */ - -static int nr_uarts __initdata = 0; - -static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; - -/* s3c24xx_init_uartdevs - * - * copy the specified platform data and configuration into our central - * set of devices, before the data is thrown away after the init process. - * - * This also fills in the array passed to the serial driver for the - * early initialisation of the console. -*/ - -void __init s3c24xx_init_uartdevs(char *name, - struct s3c24xx_uart_resources *res, - struct s3c2410_uartcfg *cfg, int no) -{ - struct platform_device *platdev; - struct s3c2410_uartcfg *cfgptr = uart_cfgs; - struct s3c24xx_uart_resources *resp; - int uart; - - memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no); - - for (uart = 0; uart < no; uart++, cfg++, cfgptr++) { - platdev = s3c24xx_uart_src[cfgptr->hwport]; - - resp = res + cfgptr->hwport; - - s3c24xx_uart_devs[uart] = platdev; - - platdev->name = name; - platdev->resource = resp->resources; - platdev->num_resources = resp->nr_resources; - - platdev->dev.platform_data = cfgptr; - } - - nr_uarts = no; -} - -void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - if (cpu == NULL) - return; - - if (cpu->init_uarts == NULL) { - printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); - } else - (cpu->init_uarts)(cfg, no); -} - -static int __init s3c_arch_init(void) -{ - int ret; - - // do the correct init for cpu - - if (cpu == NULL) - panic("s3c_arch_init: NULL cpu\n"); - - ret = (cpu->init)(); - if (ret != 0) - return ret; - - ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); - return ret; -} - -arch_initcall(s3c_arch_init); diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-s3c/time.c deleted file mode 100644 index 3b27b29da478..000000000000 --- a/arch/arm/plat-s3c/time.c +++ /dev/null @@ -1,285 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/time.c - * - * Copyright (C) 2003-2005 Simtec Electronics - * Ben Dooks, - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include - -static unsigned long timer_startval; -static unsigned long timer_usec_ticks; - -#ifndef TICK_MAX -#define TICK_MAX (0xffff) -#endif - -#define TIMER_USEC_SHIFT 16 - -/* we use the shifted arithmetic to work out the ratio of timer ticks - * to usecs, as often the peripheral clock is not a nice even multiple - * of 1MHz. - * - * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok - * for the current HZ value of 200 without producing overflows. - * - * Original patch by Dimitry Andric, updated by Ben Dooks -*/ - - -/* timer_mask_usec_ticks - * - * given a clock and divisor, make the value to pass into timer_ticks_to_usec - * to scale the ticks into usecs -*/ - -static inline unsigned long -timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk) -{ - unsigned long den = pclk / 1000; - - return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den; -} - -/* timer_ticks_to_usec - * - * convert timer ticks to usec. -*/ - -static inline unsigned long timer_ticks_to_usec(unsigned long ticks) -{ - unsigned long res; - - res = ticks * timer_usec_ticks; - res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */ - - return res >> TIMER_USEC_SHIFT; -} - -/*** - * Returns microsecond since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - * IRQs are disabled before entering here from do_gettimeofday() - */ - -static unsigned long s3c2410_gettimeoffset (void) -{ - unsigned long tdone; - unsigned long tval; - - /* work out how many ticks have gone since last timer interrupt */ - - tval = __raw_readl(S3C2410_TCNTO(4)); - tdone = timer_startval - tval; - - /* check to see if there is an interrupt pending */ - - if (s3c24xx_ostimer_pending()) { - /* re-read the timer, and try and fix up for the missed - * interrupt. Note, the interrupt may go off before the - * timer has re-loaded from wrapping. - */ - - tval = __raw_readl(S3C2410_TCNTO(4)); - tdone = timer_startval - tval; - - if (tval != 0) - tdone += timer_startval; - } - - return timer_ticks_to_usec(tdone); -} - - -/* - * IRQ handler for the timer - */ -static irqreturn_t -s3c2410_timer_interrupt(int irq, void *dev_id) -{ - timer_tick(); - return IRQ_HANDLED; -} - -static struct irqaction s3c2410_timer_irq = { - .name = "S3C2410 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s3c2410_timer_interrupt, -}; - -#define use_tclk1_12() ( \ - machine_is_bast() || \ - machine_is_vr1000() || \ - machine_is_anubis() || \ - machine_is_osiris()) - -static struct clk *tin; -static struct clk *tdiv; -static struct clk *timerclk; - -/* - * Set up timer interrupt, and return the current time in seconds. - * - * Currently we only use timer4, as it is the only timer which has no - * other function that can be exploited externally - */ -static void s3c2410_timer_setup (void) -{ - unsigned long tcon; - unsigned long tcnt; - unsigned long tcfg1; - unsigned long tcfg0; - - tcnt = TICK_MAX; /* default value for tcnt */ - - /* configure the system for whichever machine is in use */ - - if (use_tclk1_12()) { - /* timer is at 12MHz, scaler is 1 */ - timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); - tcnt = 12000000 / HZ; - - tcfg1 = __raw_readl(S3C2410_TCFG1); - tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; - tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; - __raw_writel(tcfg1, S3C2410_TCFG1); - } else { - unsigned long pclk; - struct clk *tscaler; - - /* for the h1940 (and others), we use the pclk from the core - * to generate the timer values. since values around 50 to - * 70MHz are not values we can directly generate the timer - * value from, we need to pre-scale and divide before using it. - * - * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz - * (8.45 ticks per usec) - */ - - pclk = clk_get_rate(timerclk); - - /* configure clock tick */ - - timer_usec_ticks = timer_mask_usec_ticks(6, pclk); - - tscaler = clk_get_parent(tdiv); - - clk_set_rate(tscaler, pclk / 3); - clk_set_rate(tdiv, pclk / 6); - clk_set_parent(tin, tdiv); - - tcnt = clk_get_rate(tin) / HZ; - } - - tcon = __raw_readl(S3C2410_TCON); - tcfg0 = __raw_readl(S3C2410_TCFG0); - tcfg1 = __raw_readl(S3C2410_TCFG1); - - /* timers reload after counting zero, so reduce the count by 1 */ - - tcnt--; - - printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", - tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks); - - /* check to see if timer is within 16bit range... */ - if (tcnt > TICK_MAX) { - panic("setup_timer: HZ is too small, cannot configure timer!"); - return; - } - - __raw_writel(tcfg1, S3C2410_TCFG1); - __raw_writel(tcfg0, S3C2410_TCFG0); - - timer_startval = tcnt; - __raw_writel(tcnt, S3C2410_TCNTB(4)); - - /* ensure timer is stopped... */ - - tcon &= ~(7<<20); - tcon |= S3C2410_TCON_T4RELOAD; - tcon |= S3C2410_TCON_T4MANUALUPD; - - __raw_writel(tcon, S3C2410_TCON); - __raw_writel(tcnt, S3C2410_TCNTB(4)); - __raw_writel(tcnt, S3C2410_TCMPB(4)); - - /* start the timer running */ - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - __raw_writel(tcon, S3C2410_TCON); -} - -static void __init s3c2410_timer_resources(void) -{ - struct platform_device tmpdev; - - tmpdev.dev.bus = &platform_bus_type; - tmpdev.id = 4; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get clock for system timer"); - - clk_enable(timerclk); - - if (!use_tclk1_12()) { - tin = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin)) - panic("failed to get pwm-tin clock for system timer"); - - tdiv = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv)) - panic("failed to get pwm-tdiv clock for system timer"); - } - - clk_enable(tin); -} - -static void __init s3c2410_timer_init(void) -{ - s3c2410_timer_resources(); - s3c2410_timer_setup(); - setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); -} - -struct sys_timer s3c24xx_timer = { - .init = s3c2410_timer_init, - .offset = s3c2410_gettimeoffset, - .resume = s3c2410_timer_setup -}; -- cgit v1.2.2