From e8ce0eb5e2254b85415e4b58e73f24a5d13846a1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 26 Aug 2011 20:28:52 +0100 Subject: ARM: pm: preallocate a page table for suspend/resume Preallocate a page table and setup an identity mapping for the MMU enable code. This means we don't have to "borrow" a page table to do this, avoiding complexities with L2 cache coherency. Tested-by: Santosh Shilimkar Tested-by: Shawn Guo Tested-by: Lorenzo Pieralisi Signed-off-by: Russell King --- arch/arm/mm/proc-xsc3.S | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch/arm/mm/proc-xsc3.S') diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 755e1bf22681..efd49492fa4d 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -435,13 +435,7 @@ ENTRY(cpu_xsc3_do_resume) mcr p15, 0, r7, c3, c0, 0 @ domain ID mcr p15, 0, r8, c2, c0, 0 @ translation table base addr mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg - - @ temporarily map resume_turn_on_mmu into the page table, - @ otherwise prefetch abort occurs after MMU is turned on mov r0, r10 @ control register - mov r2, r8, lsr #14 @ get TTB0 base - mov r2, r2, lsl #14 - ldr r3, =0x542e @ section flags b cpu_resume_mmu ENDPROC(cpu_xsc3_do_resume) #endif -- cgit v1.2.2 From de8e71ca4f2e17329f6718ae88d5c8336cb249ee Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 27 Aug 2011 22:39:09 +0100 Subject: ARM: pm: only use preallocated page table during resume Only use the preallocated page table during the resume, not while suspending. This avoids the overhead of having to switch unnecessarily to the resume page table in the suspend path. Tested-by: Santosh Shilimkar Tested-by: Shawn Guo Tested-by: Lorenzo Pieralisi Signed-off-by: Russell King --- arch/arm/mm/proc-xsc3.S | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch/arm/mm/proc-xsc3.S') diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index efd49492fa4d..abf0507a08ae 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -406,24 +406,23 @@ ENTRY(cpu_xsc3_set_pte_ext) .align .globl cpu_xsc3_suspend_size -.equ cpu_xsc3_suspend_size, 4 * 7 +.equ cpu_xsc3_suspend_size, 4 * 6 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) - stmfd sp!, {r4 - r10, lr} + stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r5, c15, c1, 0 @ CP access reg mrc p15, 0, r6, c13, c0, 0 @ PID mrc p15, 0, r7, c3, c0, 0 @ domain ID - mrc p15, 0, r8, c2, c0, 0 @ translation table base addr - mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg - mrc p15, 0, r10, c1, c0, 0 @ control reg + mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mrc p15, 0, r9, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r4 - r10} @ store cp regs - ldmia sp!, {r4 - r10, pc} + stmia r0, {r4 - r9} @ store cp regs + ldmia sp!, {r4 - r9, pc} ENDPROC(cpu_xsc3_do_suspend) ENTRY(cpu_xsc3_do_resume) - ldmia r0, {r4 - r10} @ load cp regs + ldmia r0, {r4 - r9} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer @@ -433,9 +432,10 @@ ENTRY(cpu_xsc3_do_resume) mcr p15, 0, r5, c15, c1, 0 @ CP access reg mcr p15, 0, r6, c13, c0, 0 @ PID mcr p15, 0, r7, c3, c0, 0 @ domain ID - mcr p15, 0, r8, c2, c0, 0 @ translation table base addr - mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg - mov r0, r10 @ control register + orr r1, r1, #0x18 @ cache the page table in L2 + mcr p15, 0, r1, c2, c0, 0 @ translation table base addr + mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg + mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_xsc3_do_resume) #endif -- cgit v1.2.2