From 2332656aec7ae88248cbd9aa6b35c857bb449c94 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:17 +0200 Subject: arm: mach-orion5x: use plus instead of or for address definitions Since we are going to use IOMEM() to define many base virtual addresses, we can no longer use binary or to define the individual register addresses ("binary or" arithmetic on pointers is not allowed). Instead, use the more conventional plus operator to do so. The binary or operators were actually not useful because the low-order bits of the base address were always zero, so the usage of the binary or operators was effectively identical to a plus operator. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-orion5x/include/mach/bridge-regs.h | 20 ++++----- arch/arm/mach-orion5x/include/mach/orion5x.h | 52 ++++++++++++------------ arch/arm/mach-orion5x/pci.c | 2 +- 3 files changed, 37 insertions(+), 37 deletions(-) (limited to 'arch/arm/mach-orion5x') diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 11a3c1e9801f..461fd69a10ae 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -13,27 +13,27 @@ #include -#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100) +#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100) -#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) +#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104) -#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108) #define WDT_RESET_OUT_EN 0x0002 -#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) +#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c) -#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110) -#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) +#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C) #define WDT_INT_REQ 0x0008 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) +#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200) -#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) +#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) -#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE + 0x300) +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE + 0x300) #endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 683e085ce162..87bd378b8203 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -68,42 +68,42 @@ * Orion Registers Map ******************************************************************************/ -#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500) -#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) -#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) -#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) +#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x00000) +#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE + 0x1500) +#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x10000) +#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x10000) +#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE + (x)) #define GPIO_VIRT_BASE ORION5X_DEV_BUS_REG(0x0100) -#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600) -#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) +#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x0600) +#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x1000) +#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2100) -#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) +#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x20000) -#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) +#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x30000) -#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) +#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x40000) -#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) -#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) +#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x50000) +#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x50000) -#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) -#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) +#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x60900) +#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x60900) -#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) -#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) +#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x70000) +#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x70000) -#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) -#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x80000) +#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x80000) -#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000) +#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x90000) -#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) -#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) +#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0xa0000) +#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0xa0000) /******************************************************************************* * Device Bus Registers diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index cb19e1661bb3..b36f928d017c 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -198,7 +198,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /***************************************************************************** * PCI controller ****************************************************************************/ -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE + (x)) #define PCI_MODE ORION5X_PCI_REG(0xd00) #define PCI_CMD ORION5X_PCI_REG(0xc00) #define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) -- cgit v1.2.2 From 3904a39321422d424f790d18a4746b99e1aed0e9 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:21 +0200 Subject: arm: mach-orion5x: use IOMEM() for base address definitions We now define all virtual base address constants using IOMEM() so that those are naturally typed as void __iomem pointers, and we do the necessary adjustements in the mach-orion5x code. Note that we introduce a few temporary additional "unsigned long" casts when calling into plat-orion functions. Those are removed by followup patches converting plat-orion functions to void __iomem pointers as well. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-orion5x/addr-map.c | 2 +- arch/arm/mach-orion5x/common.c | 19 +++++++++++-------- arch/arm/mach-orion5x/dns323-setup.c | 2 +- arch/arm/mach-orion5x/include/mach/orion5x.h | 8 ++++---- arch/arm/mach-orion5x/irq.c | 5 +++-- arch/arm/mach-orion5x/mpp.c | 3 ++- arch/arm/mach-orion5x/pci.c | 4 ++-- 7 files changed, 24 insertions(+), 19 deletions(-) (limited to 'arch/arm/mach-orion5x') diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index eaac83d1df6f..d309f53b7a0c 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -79,7 +79,7 @@ static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, static struct orion_addr_map_cfg addr_map_cfg __initdata = { .num_wins = 8, .cpu_win_can_remap = cpu_win_can_remap, - .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, + .bridge_virt_base = (unsigned long) ORION5X_BRIDGE_VIRT_BASE, }; static const struct __initdata orion_addr_map_info addr_map_info[] = { diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 410291c67666..a890cb0eb83d 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -42,22 +42,22 @@ ****************************************************************************/ static struct map_desc orion5x_io_desc[] __initdata = { { - .virtual = ORION5X_REGS_VIRT_BASE, + .virtual = (unsigned long) ORION5X_REGS_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE), .length = ORION5X_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCIE_IO_VIRT_BASE, + .virtual = (unsigned long) ORION5X_PCIE_IO_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE), .length = ORION5X_PCIE_IO_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCI_IO_VIRT_BASE, + .virtual = (unsigned long) ORION5X_PCI_IO_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE), .length = ORION5X_PCI_IO_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCIE_WA_VIRT_BASE, + .virtual = (unsigned long) ORION5X_PCIE_WA_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), .length = ORION5X_PCIE_WA_SIZE, .type = MT_DEVICE, @@ -156,7 +156,8 @@ void __init orion5x_spi_init() ****************************************************************************/ void __init orion5x_uart0_init(void) { - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + orion_uart0_init((unsigned long) UART0_VIRT_BASE, + UART0_PHYS_BASE, IRQ_ORION5X_UART0, tclk); } @@ -165,7 +166,8 @@ void __init orion5x_uart0_init(void) ****************************************************************************/ void __init orion5x_uart1_init(void) { - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + orion_uart1_init((unsigned long) UART1_VIRT_BASE, + UART1_PHYS_BASE, IRQ_ORION5X_UART1, tclk); } @@ -203,7 +205,7 @@ void __init orion5x_wdt_init(void) ****************************************************************************/ void __init orion5x_init_early(void) { - orion_time_set_base(TIMER_VIRT_BASE); + orion_time_set_base((unsigned long) TIMER_VIRT_BASE); } int orion5x_tclk; @@ -224,7 +226,8 @@ static void __init orion5x_timer_init(void) { orion5x_tclk = orion5x_find_tclk(); - orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + orion_time_init((unsigned long) ORION5X_BRIDGE_VIRT_BASE, + BRIDGE_INT_TIMER1_CLR, IRQ_ORION5X_BRIDGE, orion5x_tclk); } diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index d470864b4e42..3a5e6fc197f7 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -700,7 +700,7 @@ static void __init dns323_init(void) * Note: AFAIK, rev B1 needs the same treatement but I'll let * somebody else test it. */ - writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c); + writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c); break; } } diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 87bd378b8203..6fd38ab5e267 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -37,16 +37,16 @@ * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) ****************************************************************************/ #define ORION5X_REGS_PHYS_BASE 0xf1000000 -#define ORION5X_REGS_VIRT_BASE 0xfdd00000 +#define ORION5X_REGS_VIRT_BASE IOMEM(0xfdd00000) #define ORION5X_REGS_SIZE SZ_1M #define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 +#define ORION5X_PCIE_IO_VIRT_BASE IOMEM(0xfde00000) #define ORION5X_PCIE_IO_BUS_BASE 0x00000000 #define ORION5X_PCIE_IO_SIZE SZ_1M #define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 +#define ORION5X_PCI_IO_VIRT_BASE IOMEM(0xfdf00000) #define ORION5X_PCI_IO_BUS_BASE 0x00100000 #define ORION5X_PCI_IO_SIZE SZ_1M @@ -55,7 +55,7 @@ /* Relevant only for Orion-1/Orion-NAS */ #define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 +#define ORION5X_PCIE_WA_VIRT_BASE IOMEM(0xfe000000) #define ORION5X_PCIE_WA_SIZE SZ_16M #define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 17da7091d310..bf9ff4f00818 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -24,11 +25,11 @@ static int __initdata gpio0_irqs[4] = { void __init orion5x_init_irq(void) { - orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); + orion_irq_init(0, MAIN_IRQ_MASK); /* * Initialize gpiolib for GPIOs 0-31. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index 5b70026f478c..30f5ef6e2ec2 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -40,5 +40,6 @@ static unsigned int __init orion5x_variant(void) void __init orion5x_mpp_conf(unsigned int *mpp_list) { orion_mpp_conf(mpp_list, orion5x_variant(), - MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE); + MPP_MAX, + (unsigned long) ORION5X_DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index b36f928d017c..b0822a864e0f 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -38,7 +38,7 @@ /***************************************************************************** * PCIe controller ****************************************************************************/ -#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE) +#define PCIE_BASE (ORION5X_PCIE_VIRT_BASE) void __init orion5x_pcie_id(u32 *dev, u32 *rev) { @@ -111,7 +111,7 @@ static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, return PCIBIOS_DEVICE_NOT_FOUND; } - ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE, + ret = orion_pcie_rd_conf_wa(ORION5X_PCIE_WA_VIRT_BASE, bus, devfn, where, size, val); return ret; -- cgit v1.2.2 From d19beac1d9358bb4a2a303f4327bf2d40ba88464 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:23 +0200 Subject: arm: plat-orion: use void __iomem pointers for UART registration functions The registration functions for UARTs now take void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/common.c files. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-orion5x/common.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-orion5x') diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index a890cb0eb83d..79f9ffb9a142 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -156,8 +156,7 @@ void __init orion5x_spi_init() ****************************************************************************/ void __init orion5x_uart0_init(void) { - orion_uart0_init((unsigned long) UART0_VIRT_BASE, - UART0_PHYS_BASE, + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, IRQ_ORION5X_UART0, tclk); } @@ -166,8 +165,7 @@ void __init orion5x_uart0_init(void) ****************************************************************************/ void __init orion5x_uart1_init(void) { - orion_uart1_init((unsigned long) UART1_VIRT_BASE, - UART1_PHYS_BASE, + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, IRQ_ORION5X_UART1, tclk); } -- cgit v1.2.2 From 5a2f55019391218d8c08c6f9d32591d91200de77 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:24 +0200 Subject: arm: plat-orion: use void __iomem pointers for MPP functions The registration function for MPP now takes void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/mpp.c files. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-orion5x/mpp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm/mach-orion5x') diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index 30f5ef6e2ec2..5b70026f478c 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -40,6 +40,5 @@ static unsigned int __init orion5x_variant(void) void __init orion5x_mpp_conf(unsigned int *mpp_list) { orion_mpp_conf(mpp_list, orion5x_variant(), - MPP_MAX, - (unsigned long) ORION5X_DEV_BUS_VIRT_BASE); + MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE); } -- cgit v1.2.2 From e96a0309f8545d539c1bf4acd5b58727a8f39818 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:25 +0200 Subject: arm: plat-orion: use void __iomem pointers for time functions The functions for time management now take void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/common.c files. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-orion5x/common.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-orion5x') diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 79f9ffb9a142..58b754ff701c 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -203,7 +203,7 @@ void __init orion5x_wdt_init(void) ****************************************************************************/ void __init orion5x_init_early(void) { - orion_time_set_base((unsigned long) TIMER_VIRT_BASE); + orion_time_set_base(TIMER_VIRT_BASE); } int orion5x_tclk; @@ -224,8 +224,7 @@ static void __init orion5x_timer_init(void) { orion5x_tclk = orion5x_find_tclk(); - orion_time_init((unsigned long) ORION5X_BRIDGE_VIRT_BASE, - BRIDGE_INT_TIMER1_CLR, + orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_ORION5X_BRIDGE, orion5x_tclk); } -- cgit v1.2.2 From 9b7b7d8b024d3e44412abbbb0206ab8f60c459ad Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:26 +0200 Subject: arm: plat-orion: use void __iomem pointers for addr-map functions The functions for address mapping management now take void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/common.c files. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-orion5x/addr-map.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-orion5x') diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index d309f53b7a0c..b5efc0fd31cb 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -79,7 +79,7 @@ static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, static struct orion_addr_map_cfg addr_map_cfg __initdata = { .num_wins = 8, .cpu_win_can_remap = cpu_win_can_remap, - .bridge_virt_base = (unsigned long) ORION5X_BRIDGE_VIRT_BASE, + .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, }; static const struct __initdata orion_addr_map_info addr_map_info[] = { @@ -113,7 +113,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void) /* * Setup MBUS dram target info. */ - orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE); + orion_setup_cpu_mbus_target(&addr_map_cfg, + (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE); } void __init orion5x_setup_dev_boot_win(u32 base, u32 size) -- cgit v1.2.2