From bee036b503214dd65f62af6599d2bebdf156467c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 1 Apr 2008 16:21:49 +0100 Subject: [ARM] 4886/1: Orion: grab ts209 ethernet MAC address from flash The bootloader on ts209 Orion boards doesn't configure the right ethernet MAC address into the GigE unit on boot. The only way to get the MAC address is by parsing it from the 'NAS Config' flash partition, which is an ext2 partition that contains a file which holds the MAC address in plain text (format "xx:xx:xx:xx:xx:xx\n") -- this patch does that. Tested-by: Martin Michlmayr Cc: Byron Bradley Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-orion5x/ts209-setup.c | 83 +++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) (limited to 'arch/arm/mach-orion5x/ts209-setup.c') diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 71b0cffa2fe0..fd43863a86f6 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -188,6 +188,87 @@ static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { .force_phy_addr = 1, }; +static int __init parse_hex_nibble(char n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init parse_hex_byte(const char *b) +{ + int hi; + int lo; + + hi = parse_hex_nibble(b[0]); + lo = parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + +static int __init check_mac_addr(const char *addr_str) +{ + u_int8_t addr[6]; + int i; + + for (i = 0; i < 6; i++) { + int byte; + + /* + * Enforce "xx:xx:xx:xx:xx:xx\n" format. + */ + if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n')) + return -1; + + byte = parse_hex_byte(addr_str + (i * 3)); + if (byte < 0) + return -1; + addr[i] = byte; + } + + printk(KERN_INFO "ts209: found ethernet mac address "); + for (i = 0; i < 6; i++) + printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + + memcpy(qnap_ts209_eth_data.mac_addr, addr, 6); + + return 0; +} + +/* + * The 'NAS Config' flash partition has an ext2 filesystem which + * contains a file that has the ethernet MAC address in plain text + * (format "xx:xx:xx:xx:xx:xx\n".) + */ +static void __init ts209_find_mac_addr(void) +{ + unsigned long addr; + + for (addr = 0x00700000; addr < 0x00760000; addr += 1024) { + char *nor_page; + int ret = 0; + + nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024); + if (nor_page != NULL) { + ret = check_mac_addr(nor_page); + iounmap(nor_page); + } + + if (ret == 0) + break; + } +} + /***************************************************************************** * RTC S35390A on I2C bus ****************************************************************************/ @@ -342,7 +423,9 @@ static void __init qnap_ts209_init(void) pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); + ts209_find_mac_addr(); orion5x_eth_init(&qnap_ts209_eth_data); + orion5x_sata_init(&qnap_ts209_sata_data); } -- cgit v1.2.2