From 03e111045e362e16e97fdd79a49590a763fe5216 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 10 May 2010 10:35:17 +0200 Subject: OMAP: RX51: Add LCD Panel support Adds basic support for LCD Panel on Nokia N900 Signed-off-by: Roger Quadros Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-rx51-peripherals.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/mach-omap2/board-rx51-peripherals.c') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 4377a4cf36eb..f40453774855 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -45,6 +45,7 @@ /* list all spi devices here */ enum { RX51_SPI_WL1251, + RX51_SPI_MIPID, /* LCD panel */ }; static struct wl12xx_platform_data wl1251_pdata; @@ -54,6 +55,11 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = { .single_channel = 1, }; +static struct omap2_mcspi_device_config mipid_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { [RX51_SPI_WL1251] = { .modalias = "wl1251", @@ -64,6 +70,13 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, + [RX51_SPI_MIPID] = { + .modalias = "acx565akm", + .bus_num = 1, + .chip_select = 2, + .max_speed_hz = 6000000, + .controller_data = &mipid_mcspi_config, + }, }; #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -- cgit v1.2.2