From 58cda884ecc87dcce18d463b0c8bd928dae63ad8 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Fri, 24 Jul 2009 19:43:25 -0600 Subject: OMAP3 SDRC: add support for 2 SDRAM chip selects Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/board-omap3beagle.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2/board-omap3beagle.c') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 991ac9c38032..4abefd9566e8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); -- cgit v1.2.2 From 9fb97412c3be5d0d1dd0e9d7c5268469e4c942aa Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Fri, 24 Jul 2009 19:43:25 -0600 Subject: OMAP3: Setup MUX settings for SDRC CKE signals This patches ensures the MUX settings are correct for the SDRC CKE signals to SDRAM. This allows the self-refresh to work when 2 chip-selects are in use. A warning is thrown away in case the initial muxing is incorrect, in order to track faulty or old-dated bootloaders. Note: The CONFIG_OMAP_MUX and CONFIG_OMAP_MUX_WARNINGS options must be enabled for the mux code to have effect. Signed-off-by: Jean Pihet Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/board-omap3beagle.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/mach-omap2/board-omap3beagle.c') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 4abefd9566e8..e00ba128cece 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -409,6 +409,10 @@ static void __init omap3_beagle_init(void) usb_musb_init(); omap3beagle_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3_beagle_map_io(void) -- cgit v1.2.2