From 97f678989afe5dd1584a0877dfd8b0d2e124b73a Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:49:01 -0700 Subject: OMAP4: DPLL: Add dpll api to control GATE_CTRL On OMAP4, the dpll post divider outputs (MX outputs) along with clockout_x2 output provide a way to allow/deny hardware level autogating. Allowing autoidle would mean that the hw would autogate this clock when there is no dependency for it. Denying idle would mean that this clock output will be forced to stay enabled. Add dpll api's to read/allow/deny idle control for these dpll mx postdividers. NOTE: The gatectrl bit set to 0 allows gatectrl, and the bit set to 1 denies gatectrl. Signed-off-by: Rajendra Nayak [paul@pwsan.com: moved OMAP4-specific DPLL control code to mach-omap2/dpll44xx.c; added some documentation for CLOCK_CLKOUTX2] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2/Makefile') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 10c3c8f16eaa..89274a9f0357 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -123,7 +123,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \ clock3517.o clock36xx.o \ dpll3xxx.o clock3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \ - dpll3xxx.o + dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o -- cgit v1.2.2