From 4b9100dde2820296003940ffd81e006c33c9bf5d Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:41:09 +0100 Subject: OMAP7XX: PM: Add omap850 support This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This file had no omap850 specific code. Original omap850 support in Linwizard was done by cloning the omap730 code. That work was done by Zebediah C. McClure. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/pm.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 5218943c91c0..12f246e3cdca 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -183,7 +183,7 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | OMAP_IRQ_BIT(INT_730_IH2_IRQ); else if (cpu_is_omap15xx()) @@ -195,7 +195,7 @@ static void omap_pm_wakeup_setup(void) omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_writel(~level2_wake, OMAP_IH2_0_MIR); omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), @@ -253,7 +253,7 @@ void omap1_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_SAVE(OMAP_IH1_MIR); MPUI730_SAVE(OMAP_IH2_0_MIR); MPUI730_SAVE(OMAP_IH2_1_MIR); @@ -306,7 +306,7 @@ void omap1_pm_suspend(void) omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); /* shut down dsp_ck */ - if (!cpu_is_omap730()) + if (!cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); /* temporarily enabling api_ck to access DSP registers */ @@ -383,7 +383,7 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_RESTORE(EMIFS_CONFIG); MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); MPUI730_RESTORE(OMAP_IH1_MIR); @@ -461,7 +461,7 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_SAVE(MPUI_CTRL); MPUI730_SAVE(MPUI_DSP_STATUS); MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); @@ -517,7 +517,7 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI730_CTRL_REG 0x%-8x \n" "MPUI730_DSP_STATUS_REG: 0x%-8x \n" @@ -668,7 +668,7 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, omap730_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { @@ -686,7 +686,7 @@ static int __init omap_pm_init(void) pm_idle = omap1_pm_idle; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); else if (cpu_is_omap16xx()) setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); @@ -700,7 +700,7 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); -- cgit v1.2.2