From 8d27b2f7988b652dbabf79291a3e2550c06e1af5 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Thu, 5 Nov 2009 20:27:46 +0000 Subject: [ARM] Kirkwood: Remove code duplication in QNAP setup files Remove the code duplication found in the setup files of TS-219 and TS-41x. Signed-off-by: Martin Michlmayr Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/Makefile | 4 +- arch/arm/mach-kirkwood/ts219-setup.c | 105 +------------------------------ arch/arm/mach-kirkwood/ts41x-setup.c | 105 +------------------------------ arch/arm/mach-kirkwood/tsx1x-common.c | 113 ++++++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/tsx1x-common.h | 7 +++ 5 files changed, 128 insertions(+), 206 deletions(-) create mode 100644 arch/arm/mach-kirkwood/tsx1x-common.c create mode 100644 arch/arm/mach-kirkwood/tsx1x-common.h (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 0c79cedfa64d..9f2f67b2b63d 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -5,8 +5,8 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o -obj-$(CONFIG_MACH_TS219) += ts219-setup.o -obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o +obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o +obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index a7c209d599e8..2830f0fe80e0 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -14,87 +14,17 @@ #include #include #include -#include -#include -#include -#include #include #include #include #include #include -#include -#include -#include #include #include #include #include "common.h" #include "mpp.h" - -/**************************************************************************** - * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with - * the QNAP firmware. - * Layout as used by QNAP: - * 0x00000000-0x00080000 : "U-Boot" - * 0x00200000-0x00400000 : "Kernel" - * 0x00400000-0x00d00000 : "RootFS" - * 0x00d00000-0x01000000 : "RootFS2" - * 0x00080000-0x000c0000 : "U-Boot Config" - * 0x000c0000-0x00200000 : "NAS Config" - * - * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout - * used by the QNAP TS-109/TS-209. - * - ***************************************************************************/ - -static struct mtd_partition qnap_ts219_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0x00200000, - }, { - .name = "RootFS1", - .size = 0x00900000, - .offset = 0x00400000, - }, { - .name = "RootFS2", - .size = 0x00300000, - .offset = 0x00d00000, - }, { - .name = "U-Boot Config", - .size = 0x00040000, - .offset = 0x00080000, - }, { - .name = "NAS Config", - .size = 0x00140000, - .offset = 0x000c0000, - }, -}; - -static const struct flash_platform_data qnap_ts219_flash = { - .type = "m25p128", - .name = "spi_flash", - .parts = qnap_ts219_partitions, - .nr_parts = ARRAY_SIZE(qnap_ts219_partitions), -}; - -static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &qnap_ts219_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; +#include "tsx1x-common.h" static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), @@ -156,33 +86,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { 0 }; - -/***************************************************************************** - * QNAP TS-x19 specific power off method via UART1-attached PIC - ****************************************************************************/ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -void qnap_ts219_power_off(void) -{ - /* 19200 baud divisor */ - const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack UART1 and reset into sane state (19200,8n1) */ - writel(0x83, UART1_REG(LCR)); - writel(divisor & 0xff, UART1_REG(DLL)); - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); - writel(0x03, UART1_REG(LCR)); - writel(0x00, UART1_REG(IER)); - writel(0x00, UART1_REG(FCR)); - writel(0x00, UART1_REG(MCR)); - - /* send the power-off command 'A' to PIC */ - writel('A', UART1_REG(TX)); -} - static void __init qnap_ts219_init(void) { /* @@ -193,9 +96,7 @@ static void __init qnap_ts219_init(void) kirkwood_uart0_init(); kirkwood_uart1_init(); /* A PIC controller is connected here. */ - spi_register_board_info(qnap_ts219_spi_slave_info, - ARRAY_SIZE(qnap_ts219_spi_slave_info)); - kirkwood_spi_init(); + qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); kirkwood_ge00_init(&qnap_ts219_ge00_data); @@ -203,7 +104,7 @@ static void __init qnap_ts219_init(void) kirkwood_ehci_init(); platform_device_register(&qnap_ts219_button_device); - pm_power_off = qnap_ts219_power_off; + pm_power_off = qnap_tsx1x_power_off; } diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index a1972c948503..de49c2d9e74b 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -14,87 +14,17 @@ #include #include #include -#include -#include -#include -#include #include #include #include #include #include -#include -#include -#include #include #include #include #include "common.h" #include "mpp.h" - -/**************************************************************************** - * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with - * the QNAP firmware. - * Layout as used by QNAP: - * 0x00000000-0x00080000 : "U-Boot" - * 0x00200000-0x00400000 : "Kernel" - * 0x00400000-0x00d00000 : "RootFS" - * 0x00d00000-0x01000000 : "RootFS2" - * 0x00080000-0x000c0000 : "U-Boot Config" - * 0x000c0000-0x00200000 : "NAS Config" - * - * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout - * used by the QNAP TS-109/TS-209. - * - ***************************************************************************/ - -static struct mtd_partition qnap_ts41x_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0x00200000, - }, { - .name = "RootFS1", - .size = 0x00900000, - .offset = 0x00400000, - }, { - .name = "RootFS2", - .size = 0x00300000, - .offset = 0x00d00000, - }, { - .name = "U-Boot Config", - .size = 0x00040000, - .offset = 0x00080000, - }, { - .name = "NAS Config", - .size = 0x00140000, - .offset = 0x000c0000, - }, -}; - -static const struct flash_platform_data qnap_ts41x_flash = { - .type = "m25p128", - .name = "spi_flash", - .parts = qnap_ts41x_partitions, - .nr_parts = ARRAY_SIZE(qnap_ts41x_partitions), -}; - -static struct spi_board_info __initdata qnap_ts41x_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &qnap_ts41x_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; +#include "tsx1x-common.h" static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), @@ -180,33 +110,6 @@ static unsigned int qnap_ts41x_mpp_config[] __initdata = { 0 }; - -/***************************************************************************** - * QNAP TS-x19 specific power off method via UART1-attached PIC - ****************************************************************************/ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -void qnap_ts41x_power_off(void) -{ - /* 19200 baud divisor */ - const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack UART1 and reset into sane state (19200,8n1) */ - writel(0x83, UART1_REG(LCR)); - writel(divisor & 0xff, UART1_REG(DLL)); - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); - writel(0x03, UART1_REG(LCR)); - writel(0x00, UART1_REG(IER)); - writel(0x00, UART1_REG(FCR)); - writel(0x00, UART1_REG(MCR)); - - /* send the power-off command 'A' to PIC */ - writel('A', UART1_REG(TX)); -} - static void __init qnap_ts41x_init(void) { /* @@ -217,9 +120,7 @@ static void __init qnap_ts41x_init(void) kirkwood_uart0_init(); kirkwood_uart1_init(); /* A PIC controller is connected here. */ - spi_register_board_info(qnap_ts41x_spi_slave_info, - ARRAY_SIZE(qnap_ts41x_spi_slave_info)); - kirkwood_spi_init(); + qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1); kirkwood_ge00_init(&qnap_ts41x_ge00_data); @@ -228,7 +129,7 @@ static void __init qnap_ts41x_init(void) kirkwood_ehci_init(); platform_device_register(&qnap_ts41x_button_device); - pm_power_off = qnap_ts41x_power_off; + pm_power_off = qnap_tsx1x_power_off; } diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c new file mode 100644 index 000000000000..7221c20b2afa --- /dev/null +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -0,0 +1,113 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +/* + * QNAP TS-x1x Boards flash + */ + +/**************************************************************************** + * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the + * partitions on the device because we want to keep compatability with + * the QNAP firmware. + * Layout as used by QNAP: + * 0x00000000-0x00080000 : "U-Boot" + * 0x00200000-0x00400000 : "Kernel" + * 0x00400000-0x00d00000 : "RootFS" + * 0x00d00000-0x01000000 : "RootFS2" + * 0x00080000-0x000c0000 : "U-Boot Config" + * 0x000c0000-0x00200000 : "NAS Config" + * + * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout + * used by the QNAP TS-109/TS-209. + * + ***************************************************************************/ + +struct mtd_partition qnap_tsx1x_partitions[] = { + { + .name = "U-Boot", + .size = 0x00080000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .size = 0x00200000, + .offset = 0x00200000, + }, { + .name = "RootFS1", + .size = 0x00900000, + .offset = 0x00400000, + }, { + .name = "RootFS2", + .size = 0x00300000, + .offset = 0x00d00000, + }, { + .name = "U-Boot Config", + .size = 0x00040000, + .offset = 0x00080000, + }, { + .name = "NAS Config", + .size = 0x00140000, + .offset = 0x000c0000, + }, +}; + +const struct flash_platform_data qnap_tsx1x_flash = { + .type = "m25p128", + .name = "spi_flash", + .parts = qnap_tsx1x_partitions, + .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions), +}; + +struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &qnap_tsx1x_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +void qnap_tsx1x_register_flash(void) +{ + spi_register_board_info(qnap_tsx1x_spi_slave_info, + ARRAY_SIZE(qnap_tsx1x_spi_slave_info)); + kirkwood_spi_init(); +} + + +/***************************************************************************** + * QNAP TS-x1x specific power off method via UART1-attached PIC + ****************************************************************************/ + +#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) + +void qnap_tsx1x_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200)); + + pr_info("%s: triggering power-off...\n", __func__); + + /* hijack UART1 and reset into sane state (19200,8n1) */ + writel(0x83, UART1_REG(LCR)); + writel(divisor & 0xff, UART1_REG(DLL)); + writel((divisor >> 8) & 0xff, UART1_REG(DLM)); + writel(0x03, UART1_REG(LCR)); + writel(0x00, UART1_REG(IER)); + writel(0x00, UART1_REG(FCR)); + writel(0x00, UART1_REG(MCR)); + + /* send the power-off command 'A' to PIC */ + writel('A', UART1_REG(TX)); +} + diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h new file mode 100644 index 000000000000..9a592962a6ea --- /dev/null +++ b/arch/arm/mach-kirkwood/tsx1x-common.h @@ -0,0 +1,7 @@ +#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H +#define __ARCH_KIRKWOOD_TSX1X_COMMON_H + +extern void qnap_tsx1x_register_flash(void); +extern void qnap_tsx1x_power_off(void); + +#endif -- cgit v1.2.2