From 4cf3326ab5f34a333a46c59d0d3783db9cef13bf Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Mon, 21 May 2012 12:23:27 +0200 Subject: ARM: at91: add atmel-mci support for chips and boards which can use it Since atmel-mci driver supports all atmel mci versions, use it instead of the deprecated at91_mci driver. Platform data and all related configuration are removed. Signed-off-by: Ludovic Desroches [nicolas.ferre@atmel.com: remove at91_mci platform data] Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-eco920.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/mach-at91/board-eco920.c') diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 558546cf63f4..40e957d1a612 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -55,12 +55,12 @@ static struct at91_udc_data __initdata eco920_udc_data = { .pullup_pin = AT91_PIN_PB13, }; -static struct at91_mmc_data __initdata eco920_mmc_data = { - .slot_b = 0, - .wire4 = 0, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata eco920_mci0_data = { + .slot[0] = { + .bus_width = 1, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; static struct physmap_flash_data eco920_flash_data = { @@ -103,7 +103,7 @@ static void __init eco920_board_init(void) at91_add_device_usbh(&eco920_usbh_data); at91_add_device_udc(&eco920_udc_data); - at91_add_device_mmc(0, &eco920_mmc_data); + at91_add_device_mci(0, &eco920_mci0_data); platform_device_register(&eco920_flash); at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) -- cgit v1.2.2