From a957fdca4feb7fbc51f9c7c6a152a86f35ca7751 Mon Sep 17 00:00:00 2001 From: Julien Boibessot Date: Thu, 18 Oct 2012 11:50:26 +0200 Subject: ARM: mxs: Add support for the Armadeus Systems APF28 module The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY. Signed-off-by: Julien Boibessot Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c1ce813fcc4a..9bca96f0438f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ + imx28-apf28.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ imx28-cfa10049.dtb \ -- cgit v1.2.2 From 414b41536c4564db696d5fb18d8baf695491cd02 Mon Sep 17 00:00:00 2001 From: Gwenhael Goavec-Merou Date: Wed, 31 Oct 2012 18:39:26 +0100 Subject: ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board The APF28Dev is a docking board for an APF28 SOM Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Julien Boibessot Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9bca96f0438f..b451a79f2b32 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ imx28-apf28.dtb \ + imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ imx28-cfa10049.dtb \ -- cgit v1.2.2 From 86666adc1e594a3e98407da21f5f2bac587ff0cf Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 7 Nov 2012 08:17:43 +0900 Subject: ARM: dts: add board dts file for EXYNOS4412 based SMDK board Add a minimal board dts file for Samsung EXYNOS4412 based SMDK board. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..36488a58940b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ + exynos4412-smdk4412.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ -- cgit v1.2.2 From e06f1a9ed7ebff170ba05d2606d079fb36c6a52d Mon Sep 17 00:00:00 2001 From: Josh Cartwright Date: Wed, 31 Oct 2012 12:24:48 -0600 Subject: ARM: zynq: dts: split up device tree The purpose of the created zynq-7000.dtsi file is to describe the hardware common to all Zynq 7000-based boards. Also, get rid of the zynq-ep107 device tree, since it is not hardware anyone can purchase. Add a zc702 dts file based on the zynq-7000.dtsi. Add it to the dts/Makefile so it is built with the 'dtbs' target. Signed-off-by: Josh Cartwright Acked-by: Michal Simek --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..76ed11e68f72 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -103,5 +103,6 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb +dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb endif -- cgit v1.2.2 From 5c70cb01b89895189025f8de8ee2823f516eab6a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 7 Oct 2012 14:12:49 -0300 Subject: ARM: dts: imx6q-sabreauto: Add basic support mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c1ce813fcc4a..ccafe36679b9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ imx6q-arm2.dtb \ + imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ -- cgit v1.2.2 From 3fcdc0555f5043eded6312efce14cd8dd66f30f8 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 19 Nov 2012 22:25:59 -0800 Subject: ARM: davinci: move dtb targets to common location The dtb targets belong in arch/arm/boot/dts/Makefile now, so move the newly added davinci targets there. Signed-off-by: Olof Johansson --- arch/arm/boot/dts/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7fd1336da891..a008e63f79ed 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -17,6 +17,8 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ usb_a9263.dtb \ usb_a9g20.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ + da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-dove-db.dtb -- cgit v1.2.2 From 160d5f27605f5acac8f426d862e8f8a499eef2b5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 18 Nov 2012 22:08:29 +0100 Subject: ARM: mxs: Add SchulerControl SPS1 DTS file Add DTS file for this custom board. Signed-off-by: Marek Vasut Cc: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b451a79f2b32..73f0a61a8d1c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10049.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ + imx28-sps1.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle-xm.dtb \ -- cgit v1.2.2 From 95e82941b73b4a8811299ad7b639157822c8c59d Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 21 Nov 2012 13:32:21 +0900 Subject: ARM: dts: Add board dts file for Snow board (ARM Chromebook) This dts file is based on the Snow dts file in the Chromium OS kernel tree with the following changes: * Some details have been updated to match the exynos5250-smdk5250.dts file from linux-next (as of c11068538994430547722dc9fb515a0ceefd5cb9). * This file doesn't include references to hardware whose upstream support isn't quite there yet. That includes most i2c devices. Note that most i2c busses have been included with no devices. The Snow dts file is mostly just an include of the "cros5250" dts file which describes a class of similar boards. Support for other boards has not yet been send upstream. With this file and a change to use UART3 for serial output I can: * Boot to a command line using either SD or EMMC as a root filesystem * See the power button and lid switch using evtest. Signed-off-by: Doug Anderson Acked-by: Olof Johansson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 36488a58940b..e70cd372a677 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -24,7 +24,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4412-smdk4412.dtb \ - exynos5250-smdk5250.dtb + exynos5250-smdk5250.dtb \ + exynos5250-snow.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb -- cgit v1.2.2 From d3fed7bd60eb4a45afe43c6e8dfc592a30e7e33f Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Mon, 26 Nov 2012 11:34:30 +0100 Subject: ARM: dts: add missing ux500 device trees This adds hrefprev60, hrefv60plus and ccu9540 to device trees compiled during build. Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Fabio Baltieri --- arch/arm/boot/dts/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..01433b911a28 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -74,7 +74,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evm.dtb \ am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_U8500) += snowball.dtb +dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ + hrefprev60.dtb \ + hrefv60plus.dtb \ + ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ sh73a0-kzm9g.dtb -- cgit v1.2.2