From f392ba889b019602976082bfe7bf486c2594f85c Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Mon, 22 Jun 2009 10:12:28 +0100 Subject: dm mpath: add service time load balancer This patch adds a service time oriented dynamic load balancer, dm-service-time, which selects the path with the shortest estimated service time for the incoming I/O. The service time is estimated by dividing the in-flight I/O size by a performance value of each path. The performance value can be given as a table argument at the table loading time. If no performance value is given, all paths are considered equal. Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Signed-off-by: Alasdair G Kergon --- Documentation/device-mapper/dm-service-time.txt | 91 +++++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 Documentation/device-mapper/dm-service-time.txt (limited to 'Documentation') diff --git a/Documentation/device-mapper/dm-service-time.txt b/Documentation/device-mapper/dm-service-time.txt new file mode 100644 index 000000000000..7d00668e97bb --- /dev/null +++ b/Documentation/device-mapper/dm-service-time.txt @@ -0,0 +1,91 @@ +dm-service-time +=============== + +dm-service-time is a path selector module for device-mapper targets, +which selects a path with the shortest estimated service time for +the incoming I/O. + +The service time for each path is estimated by dividing the total size +of in-flight I/Os on a path with the performance value of the path. +The performance value is a relative throughput value among all paths +in a path-group, and it can be specified as a table argument. + +The path selector name is 'service-time'. + +Table parameters for each path: [ []] + : The number of I/Os to dispatch using the selected + path before switching to the next path. + If not given, internal default is used. To check + the default value, see the activated table. + : The relative throughput value of the path + among all paths in the path-group. + The valid range is 0-100. + If not given, minimum value '1' is used. + If '0' is given, the path isn't selected while + other paths having a positive value are available. + +Status for each path: \ + + : 'A' if the path is active, 'F' if the path is failed. + : The number of path failures. + : The size of in-flight I/Os on the path. + : The relative throughput value of the path + among all paths in the path-group. + + +Algorithm +========= + +dm-service-time adds the I/O size to 'in-flight-size' when the I/O is +dispatched and substracts when completed. +Basically, dm-service-time selects a path having minimum service time +which is calculated by: + + ('in-flight-size' + 'size-of-incoming-io') / 'relative_throughput' + +However, some optimizations below are used to reduce the calculation +as much as possible. + + 1. If the paths have the same 'relative_throughput', skip + the division and just compare the 'in-flight-size'. + + 2. If the paths have the same 'in-flight-size', skip the division + and just compare the 'relative_throughput'. + + 3. If some paths have non-zero 'relative_throughput' and others + have zero 'relative_throughput', ignore those paths with zero + 'relative_throughput'. + +If such optimizations can't be applied, calculate service time, and +compare service time. +If calculated service time is equal, the path having maximum +'relative_throughput' may be better. So compare 'relative_throughput' +then. + + +Examples +======== +In case that 2 paths (sda and sdb) are used with repeat_count == 128 +and sda has an average throughput 1GB/s and sdb has 4GB/s, +'relative_throughput' value may be '1' for sda and '4' for sdb. + +# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \ + dmsetup create test +# +# dmsetup table +test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4 +# +# dmsetup status +test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4 + + +Or '2' for sda and '8' for sdb would be also true. + +# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \ + dmsetup create test +# +# dmsetup table +test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8 +# +# dmsetup status +test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8 -- cgit v1.2.2