From e5bffb59cfbb3371ff00a165a5a48c1f3fdf125a Mon Sep 17 00:00:00 2001 From: Aaron Sierra Date: Wed, 17 Sep 2014 13:08:28 -0500 Subject: mtd: physmap_of: Add non-obsolete map_rom probe Previously, the only way to map a NOR device as a simple ROM was to use the obsolete "direct-mapped" compatible binding (which further requires device_type = "nor" and probe-type = "NOR" properties). This patch adds an "mtd-rom" compatible binding to the "map_rom" probe type. Signed-off-by: Aaron Sierra Signed-off-by: Brian Norris --- Documentation/devicetree/bindings/mtd/mtd-physmap.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt index 61c5ec850f2f..6b9f680cb579 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt @@ -4,8 +4,8 @@ Flash chips (Memory Technology Devices) are often used for solid state file systems on embedded devices. - compatible : should contain the specific model of mtd chip(s) - used, if known, followed by either "cfi-flash", "jedec-flash" - or "mtd-ram". + used, if known, followed by either "cfi-flash", "jedec-flash", + "mtd-ram" or "mtd-rom". - reg : Address range(s) of the mtd chip(s) It's possible to (optionally) define multiple "reg" tuples so that non-identical chips can be described in one node. -- cgit v1.2.2