From dea05fe66edb4540a53ed6623794c4978315256a Mon Sep 17 00:00:00 2001 From: Frank Li Date: Mon, 12 Nov 2012 17:58:28 +0800 Subject: regulator: gpio-regulator: doc: Fix wrong key gpio-enable Wrong description in binding document. Doc use "gpio-enable", but code use "enable-gpio" In drivers/regulator/gpio-regulator.c config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); Signed-off-by: Frank Li Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index 3703be2ab821..f71f8083c2ae 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -4,7 +4,7 @@ Required properties: - compatible : Must be "regulator-gpio". Optional properties: -- gpio-enable : GPIO to use to enable/disable the regulator. +- enable-gpio : GPIO to use to enable/disable the regulator. - gpios : GPIO group used to control voltage. - states : Selection of available voltages and GPIO configs. - startup-delay-us : Startup time in microseconds. @@ -23,7 +23,7 @@ Example: regulator-max-microvolt = <2600000>; regulator-boot-on; - gpio-enable = <&gpio0 23 0x4>; + enable-gpio = <&gpio0 23 0x4>; gpios = <&gpio0 24 0x4 &gpio0 25 0x4>; states = <1800000 0x3 -- cgit v1.2.2