From bb71ad880204b79d60331d3384103976e086cb9f Mon Sep 17 00:00:00 2001 From: Gary Hade Date: Mon, 12 May 2008 13:57:46 -0700 Subject: PCI: boot parameter to avoid expansion ROM memory allocation Contention for scarce PCI memory resources has been growing due to an increasing number of PCI slots in large multi-node systems. The kernel currently attempts by default to allocate memory for all PCI expansion ROMs so there has also been an increasing number of PCI memory allocation failures seen on these systems. This occurs because the BIOS either (1) provides insufficient PCI memory resource for all the expansion ROMs or (2) provides adequate PCI memory resource for expansion ROMs but provides the space in kernel unexpected BIOS assigned P2P non-prefetch windows. The resulting PCI memory allocation failures may be benign when related to memory requests for expansion ROMs themselves but in some cases they can occur when attempting to allocate space for more critical BARs. This can happen when a successful expansion ROM allocation request consumes memory resource that was intended for a non-ROM BAR. We have seen this happen during PCI hotplug of an adapter that contains a P2P bridge where successful memory allocation for an expansion ROM BAR on device behind the bridge consumed memory that was intended for a non-ROM BAR on the P2P bridge. In all cases the allocation failure messages can be very confusing for users. This patch provides a new 'pci=norom' kernel boot parameter that can be used to disable the default PCI expansion ROM memory resource allocation. This provides a way to avoid the above described issues on systems that do not contain PCI devices for which drivers or user-level applications depend on the default PCI expansion ROM memory resource allocation behavior. Signed-off-by: Gary Hade Signed-off-by: Jesse Barnes --- Documentation/kernel-parameters.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e07c432c731f..9cf7b34f2db0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1496,6 +1496,9 @@ and is between 256 and 4096 characters. It is defined in the file Use with caution as certain devices share address decoders between ROMs and other resources. + norom [X86-32,X86_64] Do not assign address space to + expansion ROMs that do not already have + BIOS assigned address ranges. irqmask=0xMMMM [X86-32] Set a bit mask of IRQs allowed to be assigned automatically to PCI devices. You can make the kernel exclude IRQs of your ISA cards -- cgit v1.2.2 From d8f3de0d2412bb91639cfefc5b3c79dbf3812212 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 12 Jun 2008 23:24:06 +0200 Subject: Suspend-related patches for 2.6.27 ACPI PM: Add possibility to change suspend sequence There are some systems out there that don't work correctly with our current suspend/hibernation code ordering. Provide a workaround for these systems allowing them to pass 'acpi_sleep=old_ordering' in the kernel command line so that it will use the pre-ACPI 2.0 ("old") suspend code ordering. Unfortunately, this requires us to add a platform hook to the resuming of devices for recovering the platform in case one of the device drivers' .suspend() routines returns error code. Namely, ACPI 1.0 specifies that _PTS should be called before suspending devices, but _WAK still should be called before resuming them in order to undo the changes made by _PTS. However, if there is an error during suspending devices, they are automatically resumed without returning control to the PM core, so the _WAK has to be called from within device_resume() in that cases. The patch also reorders and refactors the ACPI suspend/hibernation code to avoid duplication as far as reasonably possible. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes --- Documentation/kernel-parameters.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9cf7b34f2db0..18d793ea0dd3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -147,10 +147,14 @@ and is between 256 and 4096 characters. It is defined in the file default: 0 acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep } + Format: { s3_bios, s3_mode, s3_beep, old_ordering } See Documentation/power/video.txt for s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep as soon as the kernel's real-mode entry point is called. + old_ordering causes the ACPI 1.0 ordering of the _PTS + control method, wrt putting devices into low power + states, to be enforced (the ACPI 2.0 ordering of _PTS is + used by default). acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode Format: { level | edge | high | low } -- cgit v1.2.2