From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/usb/se401.txt | 54 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/usb/se401.txt (limited to 'Documentation/usb/se401.txt') diff --git a/Documentation/usb/se401.txt b/Documentation/usb/se401.txt new file mode 100644 index 000000000000..7b9d1c960a10 --- /dev/null +++ b/Documentation/usb/se401.txt @@ -0,0 +1,54 @@ +Linux driver for SE401 based USB cameras + +Copyright, 2001, Jeroen Vreeken + + +INTRODUCTION: + +The SE401 chip is the used in low-cost usb webcams. +It is produced by Endpoints Inc. (www.endpoints.com). +It interfaces directly to a cmos image sensor and USB. The only other major +part in a se401 based camera is a dram chip. + +The following cameras are known to work with this driver: + +Aox se401 (non-branded) cameras +Philips PVCV665 USB VGA webcam 'Vesta Fun' +Kensington VideoCAM PC Camera Model 67014 +Kensington VideoCAM PC Camera Model 67015 +Kensington VideoCAM PC Camera Model 67016 +Kensington VideoCAM PC Camera Model 67017 + + +WHAT YOU NEED: + +- USB support +- VIDEO4LINUX support + +More information about USB support for linux can be found at: +http://www.linux-usb.org + + +MODULE OPTIONS: + +When the driver is compiled as a module you can also use the 'flickerless' +option. With it exposure is limited to values that do not interfere with the +net frequency. Valid options for this option are 0, 50 and 60. (0=disable, +50=50hz, 60=60hz) + + +KNOWN PROBLEMS: + +The driver works fine with the usb-ohci and uhci host controller drivers, +the default settings also work with usb-uhci. But sending more than one bulk +transfer at a time with usb-uhci doesn't work yet. +Users of usb-ohci and uhci can safely enlarge SE401_NUMSBUF in se401.h in +order to increase the throughput (and thus framerate). + + +HELP: + +The latest info on this driver can be found at: +http://www.chello.nl/~j.vreeken/se401/ +And questions to me can be send to: +pe1rxq@amsat.org -- cgit v1.2.2