From 2b7300513b98e05058a803de3beb8a1c0a0c61d9 Mon Sep 17 00:00:00 2001 From: Kaiwan N Billimoria Date: Wed, 7 Jan 2009 16:37:34 +0100 Subject: hwmon: (lm70) Code streamlining and cleanup This fixes a byteswap bug in the LM70 temperature sensor driver, which was previously covered up by a converse bug in the driver for the LM70EVAL-LLP board (which is also fixed). Other fixes: doc updates, remove an annoying msleep(), and improve three-wire protocol handling. Signed-off-by: Kaiwan N Billimoria [ dbrownell@users.sourceforge.net: doc and whitespace tweaks ] Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- Documentation/spi/spi-lm70llp | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation/spi/spi-lm70llp') diff --git a/Documentation/spi/spi-lm70llp b/Documentation/spi/spi-lm70llp index 154bd02220b9..34a9cfd746bd 100644 --- a/Documentation/spi/spi-lm70llp +++ b/Documentation/spi/spi-lm70llp @@ -13,10 +13,20 @@ Description This driver provides glue code connecting a National Semiconductor LM70 LLP temperature sensor evaluation board to the kernel's SPI core subsystem. +This is a SPI master controller driver. It can be used in conjunction with +(layered under) the LM70 logical driver (a "SPI protocol driver"). In effect, this driver turns the parallel port interface on the eval board into a SPI bus with a single device, which will be driven by the generic LM70 driver (drivers/hwmon/lm70.c). + +Hardware Interfacing +-------------------- +The schematic for this particular board (the LM70EVAL-LLP) is +available (on page 4) here: + + http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf + The hardware interfacing on the LM70 LLP eval board is as follows: Parallel LM70 LLP -- cgit v1.2.2