From 915590cf642d82e4c9eddf8051ce2eb159ef9af4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 7 Nov 2007 02:28:52 -0800 Subject: [NET]: Remove comx driver docs. The drivers have already been removed 3.5 years ago. Signed-off-by: Adrian Bunk Acked-by: Alan Cox Signed-off-by: David S. Miller --- Documentation/networking/00-INDEX | 2 - Documentation/networking/comx.txt | 248 ----------------------- Documentation/networking/slicecom.hun | 371 ---------------------------------- Documentation/networking/slicecom.txt | 369 --------------------------------- 4 files changed, 990 deletions(-) delete mode 100644 Documentation/networking/comx.txt delete mode 100644 Documentation/networking/slicecom.hun delete mode 100644 Documentation/networking/slicecom.txt (limited to 'Documentation/networking') diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 53adb0512193..a9f4accd8989 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -24,8 +24,6 @@ baycom.txt - info on the driver for Baycom style amateur radio modems bridge.txt - where to get user space programs for ethernet bridging with Linux. -comx.txt - - info on drivers for COMX line of synchronous serial adapters. cops.txt - info on the COPS LocalTalk Linux driver cs89x0.txt diff --git a/Documentation/networking/comx.txt b/Documentation/networking/comx.txt deleted file mode 100644 index d1526eba2645..000000000000 --- a/Documentation/networking/comx.txt +++ /dev/null @@ -1,248 +0,0 @@ - - COMX drivers for the 2.2 kernel - -Originally written by: Tivadar Szemethy, -Currently maintained by: Gergely Madarasz - -Last change: 21/06/1999. - -INTRODUCTION - -This document describes the software drivers and their use for the -COMX line of synchronous serial adapters for Linux version 2.2.0 and -above. -The cards are produced and sold by ITC-Pro Ltd. Budapest, Hungary -For further info contact -or http://www.itc.hu (mostly in Hungarian). -The firmware files and software are available from ftp://ftp.itc.hu - -Currently, the drivers support the following cards and protocols: - -COMX (2x64 kbps intelligent board) -CMX (1x256 + 1x128 kbps intelligent board) -HiCOMX (2x2Mbps intelligent board) -LoCOMX (1x512 kbps passive board) -MixCOM (1x512 or 2x512kbps passive board with a hardware watchdog an - optional BRI interface and optional flashROM (1-32M)) -SliceCOM (1x2Mbps channelized E1 board) -PciCOM (X21) - -At the moment of writing this document, the (Cisco)-HDLC, LAPB, SyncPPP and -Frame Relay (DTE, rfc1294 IP encapsulation with partially implemented Q933a -LMI) protocols are available as link-level protocol. -X.25 support is being worked on. - -USAGE - -Load the comx.o module and the hardware-specific and protocol-specific -modules you'll need into the running kernel using the insmod utility. -This creates the /proc/comx directory. -See the example scripts in the 'etc' directory. - -/proc INTERFACE INTRO - -The COMX driver set has a new type of user interface based on the /proc -filesystem which eliminates the need for external user-land software doing -IOCTL calls. -Each network interface or device (i.e. those ones you configure with 'ifconfig' -and 'route' etc.) has a corresponding directory under /proc/comx. You can -dynamically create a new interface by saying 'mkdir /proc/comx/comx0' (or you -can name it whatever you want up to 8 characters long, comx[n] is just a -convention). -Generally the files contained in these directories are text files, which can -be viewed by 'cat filename' and you can write a string to such a file by -saying 'echo _string_ >filename'. This is very similar to the sysctl interface. -Don't use a text editor to edit these files, always use 'echo' (or 'cat' -where appropriate). -When you've created the comx[n] directory, two files are created automagically -in it: 'boardtype' and 'protocol'. You have to fill in these files correctly -for your board and protocol you intend to use (see the board and protocol -descriptions in this file below or the example scripts in the 'etc' directory). -After filling in these files, other files will appear in the directory for -setting the various hardware- and protocol-related informations (for example -irq and io addresses, keepalive values etc.) These files are set to default -values upon creation, so you don't necessarily have to change all of them. - -When you're ready with filling in the files in the comx[n] directory, you can -configure the corresponding network interface with the standard network -configuration utilities. If you're unable to bring the interfaces up, look up -the various kernel log files on your system, and consult the messages for -a probable reason. - -EXAMPLE - -To create the interface 'comx0' which is the first channel of a COMX card: - -insmod comx -# insmod comx-hw-comx ; insmod comx-proto-ppp (these are usually -autoloaded if you use the kernel module loader) - -mkdir /proc/comx/comx0 -echo comx >/proc/comx/comx0/boardtype -echo 0x360 >/proc/comx/comx0/io <- jumper-selectable I/O port -echo 0x0a >/proc/comx/comx0/irq <- jumper-selectable IRQ line -echo 0xd000 >/proc/comx/comx0/memaddr <- software-configurable memory - address. COMX uses 64 KB, and this - can be: 0xa000, 0xb000, 0xc000, - 0xd000, 0xe000. Avoid conflicts - with other hardware. -cat /proc/comx/comx0/firmware <- the firmware for the card -echo HDLC >/proc/comx/comx0/protocol <- the data-link protocol -echo 10 >/proc/comx/comx0/keepalive <- the keepalive for the protocol -ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 <- - finally configure it with ifconfig -Check its status: -cat /proc/comx/comx0/status - -If you want to use the second channel of this board: - -mkdir /proc/comx/comx1 -echo comx >/proc/comx/comx1/boardtype -echo 0x360 >/proc/comx/comx1/io -echo 10 >/proc/comx/comx1/irq -echo 0xd000 >/proc/comx/comx1/memaddr -echo 1 >/proc/comx/comx1/channel <- channels are numbered - as 0 (default) and 1 - -Now, check if the driver recognized that you're going to use the other -channel of the same adapter: - -cat /proc/comx/comx0/twin -comx1 -cat /proc/comx/comx1/twin -comx0 - -You don't have to load the firmware twice, if you use both channels of -an adapter, just write it into the channel 0's /proc firmware file. - -Default values: io 0x360 for COMX, 0x320 (HICOMX), irq 10, memaddr 0xd0000 - -THE LOCOMX HARDWARE DRIVER - -The LoCOMX driver doesn't require firmware, and it doesn't use memory either, -but it uses DMA channels 1 and 3. You can set the clock rate (if enabled by -jumpers on the board) by writing the kbps value into the file named 'clock'. -Set it to 'external' (it is the default) if you have external clock source. - -(Note: currently the LoCOMX driver does not support the internal clock) - -THE COMX, CMX AND HICOMX DRIVERS - -On the HICOMX, COMX and CMX, you have to load the firmware (it is different for -the three cards!). All these adapters can share the same memory -address (we usually use 0xd0000). On the CMX you can set the internal -clock rate (if enabled by jumpers on the small adapter boards) by writing -the kbps value into the 'clock' file. You have to do this before initializing -the card. If you use both HICOMX and CMX/COMX cards, initialize the HICOMX -first. The I/O address of the HICOMX board is not configurable by any -method available to the user: it is hardwired to 0x320, and if you have to -change it, consult ITC-Pro Ltd. - -THE MIXCOM DRIVER - -The MixCOM board doesn't require firmware, the driver communicates with -it through I/O ports. You can have three of these cards in one machine. - -THE SLICECOM DRIVER - -The SliceCOM board doesn't require firmware. You can have 4 of these cards -in one machine. The driver doesn't (yet) support shared interrupts, so -you will need a separate IRQ line for every board. -Read Documentation/networking/slicecom.txt for help on configuring -this adapter. - -THE HDLC/PPP LINE PROTOCOL DRIVER - -The HDLC/SyncPPP line protocol driver uses the kernel's built-in syncppp -driver (syncppp.o). You don't have to manually select syncppp.o when building -the kernel, the dependencies compile it in automatically. - - - - -EXAMPLE -(setting up hw parameters, see above) - -# using HDLC: -echo hdlc >/proc/comx/comx0/protocol -echo 10 >/proc/comx/comx0/keepalive <- not necessary, 10 is the default -ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 - -(setting up hw parameters, see above) - -# using PPP: -echo ppp >/proc/comx/comx0/protocol -ifconfig comx0 up -ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 - - -THE LAPB LINE PROTOCOL DRIVER - -For this, you'll need to configure LAPB support (See 'LAPB Data Link Driver' in -'Network options' section) into your kernel (thanks to Jonathan Naylor for his -excellent implementation). -comx-proto-lapb.o provides the following files in the appropriate directory -(the default values in parens): t1 (5), t2 (1), n2 (20), mode (DTE, STD) and -window (7). Agree with the administrator of your peer router on these -settings (most people use defaults, but you have to know if you are DTE or -DCE). - -EXAMPLE - -(setting up hw parameters, see above) -echo lapb >/proc/comx/comx0/protocol -echo dce >/proc/comx/comx0/mode <- DCE interface in this example -ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 - - -THE FRAME RELAY PROTOCOL DRIVER - -You DON'T need any other frame relay related modules from the kernel to use -COMX-Frame Relay. This protocol is a bit more complicated than the others, -because it allows to use 'subinterfaces' or DLCIs within one physical device. -First you have to create the 'master' device (the actual physical interface) -as you would do for other protocols. Specify 'frad' as protocol type. -Now you can bring this interface up by saying 'ifconfig comx0 up' (or whatever -you've named the interface). Do not assign any IP address to this interface -and do not set any routes through it. -Then, set up your DLCIs the following way: create a comx interface for each -DLCI you intend to use (with mkdir), and write 'dlci' to the 'boardtype' file, -and 'ietf-ip' to the 'protocol' file. Currently, the only supported -encapsulation type is this (also called as RFC1294/1490 IP encapsulation). -Write the DLCI number to the 'dlci' file, and write the name of the physical -COMX device to the file called 'master'. -Now you can assign an IP address to this interface and set routes using it. -See the example file for further info and example config script. -Notes: this driver implements a DTE interface with partially implemented -Q933a LMI. -You can find an extensively commented example in the 'etc' directory. - -FURTHER /proc FILES - -boardtype: -Type of the hardware. Valid values are: - 'comx', 'hicomx', 'locomx', 'cmx', 'slicecom'. - -protocol: -Data-link protocol on this channel. Can be: HDLC, LAPB, PPP, FRAD - -status: -You can read the channel's actual status from the 'status' file, for example -'cat /proc/comx/comx3/status'. - -lineup_delay: -Interpreted in seconds (default is 1). Used to avoid line jitter: the system -will consider the line status 'UP' only if it is up for at least this number -of seconds. - -debug: -You can set various debug options through this file. Valid options are: -'comx_events', 'comx_tx', 'comx_rx', 'hw_events', 'hw_tx', 'hw_rx'. -You can enable a debug options by writing its name prepended by a '+' into -the debug file, for example 'echo +comx_rx >comx0/debug'. -Disabling an option happens similarly, use the '-' prefix -(e.g. 'echo -hw_rx >debug'). -Debug results can be read from the debug file, for example: -tail -f /proc/comx/comx2/debug - - diff --git a/Documentation/networking/slicecom.hun b/Documentation/networking/slicecom.hun deleted file mode 100644 index bed2f045e550..000000000000 --- a/Documentation/networking/slicecom.hun +++ /dev/null @@ -1,371 +0,0 @@ - -SliceCOM adapter felhasznaloi dokumentacioja - 0.51 verziohoz - -Bartók István -Utolso modositas: Wed Aug 29 17:26:58 CEST 2001 - ------------------------------------------------------------------ - -Hasznalata: - -Forditas: - -Code maturity level options - [*] Prompt for development and/or incomplete code/drivers - -Network device support - Wan interfaces - MultiGate (COMX) synchronous - Support for MUNICH based boards: SliceCOM, PCICOM (NEW) - Support for HDLC and syncPPP... - - -A modulok betoltese: - -modprobe comx - -modprobe comx-proto-ppp # a Cisco-HDLC es a SyncPPP protokollt is - # ez a modul adja - -modprobe comx-hw-munich # a modul betoltodeskor azonnal jelent a - # syslogba a detektalt kartyakrol - - -Konfiguralas: - -# Ezen az interfeszen Cisco-HDLC vonali protokoll fog futni -# Az interfeszhez rendelt idoszeletek: 1,2 (128 kbit/sec-es vonal) -# (a G.703 keretben az elso adatot vivo idoszelet az 1-es) -# -mkdir /proc/comx/comx0.1/ -echo slicecom >/proc/comx/comx0.1/boardtype -echo hdlc >/proc/comx/comx0.1/protocol -echo 1 2 >/proc/comx/comx0.1/timeslots - - -# Ezen az interfeszen SyncPPP vonali protokoll fog futni -# Az interfeszhez rendelt idoszelet: 3 (64 kbit/sec-es vonal) -# -mkdir /proc/comx/comx0.2/ -echo slicecom >/proc/comx/comx0.2/boardtype -echo ppp >/proc/comx/comx0.2/protocol -echo 3 >/proc/comx/comx0.2/timeslots - -... - -ifconfig comx0.1 up -ifconfig comx0.2 up - ------------------------------------------------------------------ - -A COMX driverek default 20 csomagnyi transmit queue-t rendelnek a halozati -interfeszekhez. WAN halozatokban ennel hosszabbat is szokas hasznalni -(20 es 100 kozott), hogy a vonal kihasznaltsaga nagy terheles eseten jobb -legyen (bar ezzel megno a varhato kesleltetes a csomagok sorban allasa miatt): - -# ifconfig comx0 txqueuelen 50 - -Ezt a beallitasi lehetoseget csak az ujabb disztribuciok ifconfig parancsa -tamogatja (amik mar a 2.2 kernelekhez keszultek, mint a RedHat 6.1 vagy a -Debian 2.2). - -A 2.1-es Debian disztribuciohoz a http://www.debian.org/~rcw/2.2/netbase/ -cimrol toltheto le ujabb netbase csomag, ami mar ilyet tamogato ifconfig -parancsot tartalmaz. Bovebben a 2.2 kernel hasznalatarol Debian 2.1 alatt: -http://www.debian.org/releases/stable/running-kernel-2.2 - ------------------------------------------------------------------ - -A kartya LED-jeinek jelentese: - -piros - eg, ha Remote Alarm-ot kuld a tuloldal -zold - eg, ha a vett jelben megtalalja a keretszinkront - -Reszletesebben: - -piros: zold: jelentes: - -- - nincs keretszinkron (nincs jel, vagy rossz a jel) -- eg "minden rendben" -eg eg a vetel OK, de a tuloldal Remote Alarm-ot kuld -eg - ez nincs ertelmezve, egyelore funkcio nelkul - ------------------------------------------------------------------ - -Reszletesebb leiras a hardver beallitasi lehetosegeirol: - -Az altalanos,- es a protokoll-retegek beallitasi lehetosegeirol a 'comx.txt' -fajlban leirtak SliceCOM kartyanal is ervenyesek, itt csak a hardver-specifikus -beallitasi lehetosegek vannak osszefoglalva: - -Konfiguralasi interfesz a /proc/comx/ alatt: - -Minden timeslot-csoportnak kulon comx* interfeszt kell letrehozni mkdir-rel: -comx0, comx1, .. stb. Itt beallithato, hogy az adott interfesz hanyadik kartya -melyik timeslotja(i)bol alljon ossze. A Cisco-fele serial3:1 elnevezesek -(serial3:1 = a 3. kartyaban az 1-es idoszelet-csoport) Linuxon aliasing-ot -jelentenenek, ezert mi nem tudunk ilyen elnevezest hasznalni. - -Tobb kartya eseten a comx0.1, comx0.2, ... vagy slice0.1, slice0.2 nevek -hasznalhatoak. - -Tobb SliceCOM kartya is lehet egy gepben, de sajat interrupt kell mindegyiknek, -nem tud meg megosztott interruptot kezelni. - -Az egesz kartyat erinto beallitasok: - -Az ioport es irq beallitas nincs: amit a PCI BIOS kioszt a rendszernek, -azt hasznalja a driver. - - -comx0/boardnum - hanyadik SliceCOM kartya a gepben (a 'termeszetes' PCI - sorrendben ertve: ahogyan a /proc/pci-ban vagy az 'lspci' - kimeneteben megjelenik, altalaban az alaplapi PCI meghajto - aramkorokhoz kozelebb eso kartyak a kisebb sorszamuak) - - Default: 0 (0-tol kezdodik a szamolas) - - -Bar a kovetkezoket csak egy-egy interfeszen allitjuk at, megis az egesz kartya -mukodeset egyszerre allitjak. A megkotes hogy csak UP-ban levo interfeszen -hasznalhatoak, azert van, mert kulonben nem vart eredmenyekre vezetne egy ilyen -paranccsorozat: - - echo 0 >boardnum - echo internal >clock_source - echo 1 >boardnum - -- Ez a 0-s board clock_source-at allitana at. - -Ezek a beallitasok megmaradnak az osszes interfesz torlesekor, de torlodnek -a driver modul ki/betoltesekor. - - -comx0/clock_source - A Tx orajelforrasa, a Cisco-val hasonlatosra keszult. - Hasznalata: - - papaya:# echo line >/proc/comx/comx0/clock_source - papaya:# echo internal >/proc/comx/comx0/clock_source - - line - A Tx orajelet a vett adatfolyambol dekodolja, igyekszik - igazodni hozza. Ha nem lat orajelet az inputon, akkor - atall a sajat orajelgeneratorara. - internal - A Tx orajelet a sajat orajelgeneratora szolgaltatja. - - Default: line - - Normal osszeallitas eseten a tavkozlesi szolgaltato eszkoze - (pl. HDSL modem) adja az orajelet, ezert ez a default. - - -comx0/framing - A CRC4 ki/be kapcsolasa - - A CRC4: 16 PCM keretet (A PCM keret az, amibe a 32 darab 64 - kilobites csatorna van bemultiplexalva. Nem osszetevesztendo a HDLC - kerettel.) 2x8 -as csoportokra osztanak, es azokhoz 4-4 bites CRC-t - szamolnak. Elsosorban a vonal minosegenek a monitorozasara szolgal. - - papaya:~# echo crc4 >/proc/comx/comx0/framing - papaya:~# echo no-crc4 >/proc/comx/comx0/framing - - Default a 'crc4', a MATAV vonalak altalaban igy futnak. De ha nem - egyforma is a beallitas a vonal ket vegen, attol a forgalom altalaban - at tud menni. - - -comx0/linecode - A vonali kodolas beallitasa - - papaya:~# echo hdb3 >/proc/comx/comx0/linecode - papaya:~# echo ami >/proc/comx/comx0/linecode - - Default a 'hdb3', a MATAV vonalak igy futnak. - - (az AMI kodolas igen ritka E1-es vonalaknal). Ha ez a beallitas nem - egyezik a vonal ket vegen, akkor elofordulhat hogy a keretszinkron - osszejon, de CRC4-hibak es a vonalakon atvitt adatokban is hibak - keletkeznek (amit a HDLC/SyncPPP szinten CRC-hibaval jelez) - - -comx0/reg - a kartya aramkoreinek, a MUNICH (reg) es a FALC (lbireg) -comx0/lbireg regisztereinek kozvetlen elerese. Hasznalata: - - echo >reg 0x04 0x0 - a 4-es regiszterbe 0-t ir - echo >reg 0x104 - printk()-val kiirja a 4-es regiszter - tartalmat a syslogba. - - WARNING: ezek csak a fejleszteshez keszultek, sok galibat - lehet veluk okozni! - - -comx0/loopback - A kartya G.703 jelenek a visszahurkolasara is van lehetoseg: - - papaya:# echo none >/proc/comx/comx0/loopback - papaya:# echo local >/proc/comx/comx0/loopback - papaya:# echo remote >/proc/comx/comx0/loopback - - none - nincs visszahurkolas, normal mukodes - local - a kartya a sajat maga altal adott jelet kapja vissza - remote - a kartya a kivulrol vett jelet adja kifele - - Default: none - ------------------------------------------------------------------ - -Az interfeszhez (Cisco terminologiaban 'channel-group') kapcsolodo beallitasok: - -comx0/timeslots - mely timeslotok (idoszeletek) tartoznak az adott interfeszhez. - - papaya:~# cat /proc/comx/comx0/timeslots - 1 3 4 5 6 - papaya:~# - - Egy timeslot megkeresese (hanyas interfeszbe tartozik nalunk): - - papaya:~# grep ' 4' /proc/comx/comx*/timeslots - /proc/comx/comx0/timeslots:1 3 4 5 6 - papaya:~# - - Beallitasa: - papaya:~# echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots - - A timeslotok sorrendje nem szamit, '1 3 2' ugyanaz mint az '1 2 3'. - - Beallitashoz az adott interfesznek DOWN-ban kell lennie - (ifconfig comx0 down), de ugyanannak a kartyanak a tobbi interfesze - uzemelhet kozben. - - Beallitaskor leellenorzi, hogy az uj timeslotok nem utkoznek-e egy - masik interfesz timeslotjaival. Ha utkoznek, akkor nem allitja at. - - Mindig 10-es szamrendszerben tortenik a timeslotok ertelmezese, nehogy - a 08, 09 alaku felirast rosszul ertelmezze. - ------------------------------------------------------------------ - -Az interfeszek es a kartya allapotanak lekerdezese: - -- A ' '-szel kezdodo sorok az eredeti kimenetet, a //-rel kezdodo sorok a -magyarazatot jelzik. - - papaya:~$ cat /proc/comx/comx1/status - Interface administrative status is UP, modem status is UP, protocol is UP - Modem status changes: 0, Transmitter status is IDLE, tbusy: 0 - Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m) - (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m) - Debug flags: none - RX errors: len: 22, overrun: 1, crc: 0, aborts: 0 - buffer overrun: 0, pbuffer overrun: 0 - TX errors: underrun: 0 - Line keepalive (value: 10) status UP [0] - -// Itt kezdodik a hardver-specifikus resz: - Controller status: - No alarms - -// Alarm: hibajelzes: -// -// No alarms - minden rendben -// -// LOS - Loss Of Signal - nem erzekel jelet a bemeneten. -// AIS - Alarm Indication Signal - csak egymas utani 1-esek jonnek -// a bemeneten, a tuloldal igy is jelezheti hogy meghibasodott vagy -// nincs inicializalva. -// AUXP - Auxiliary Pattern Indication - 01010101.. sorozat jon a bemeneten. -// LFA - Loss of Frame Alignment - nincs keretszinkron -// RRA - Receive Remote Alarm - a tuloldal el, de hibat jelez. -// LMFA - Loss of CRC4 Multiframe Alignment - nincs CRC4-multikeret-szinkron -// NMF - No Multiframe alignment Found after 400 msec - ilyen alarm a no-crc4 -// es crc4 keretezesek eseten nincs, lasd lentebb -// -// Egyeb lehetseges hibajelzesek: -// -// Transmit Line Short - a kartya ugy erzi hogy az adasi kimenete rovidre -// van zarva, ezert kikapcsolta az adast. (nem feltetlenul veszi eszre -// a kulso rovidzarat) - -// A veteli oldal csomagjainak lancolt listai, debug celokra: - - Rx ring: - rafutott: 0 - lastcheck: 50845731, jiffies: 51314281 - base: 017b1858 - rx_desc_ptr: 0 - rx_desc_ptr: 017b1858 - hw_curr_ptr: 017b1858 - 06040000 017b1868 017b1898 c016ff00 - 06040000 017b1878 017b1e9c c016ff00 - 46040000 017b1888 017b24a0 c016ff00 - 06040000 017b1858 017b2aa4 c016ff00 - -// A kartyat hasznalo tobbi interfesz: a 0-s channel-group a comx1 interfesz, -// es az 1,2,...,16 timeslotok tartoznak hozza: - - Interfaces using this board: (channel-group, interface, timeslots) - 0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 1 comx2: 17 - 2 comx3: 18 - 3 comx4: 19 - 4 comx5: 20 - 5 comx6: 21 - 6 comx7: 22 - 7 comx8: 23 - 8 comx9: 24 - 9 comx10: 25 - 10 comx11: 26 - 11 comx12: 27 - 12 comx13: 28 - 13 comx14: 29 - 14 comx15: 30 - 15 comx16: 31 - -// Hany esemenyt kezelt le a driver egy-egy hardver-interrupt kiszolgalasanal: - - Interrupt work histogram: - hist[ 0]: 0 hist[ 1]: 2 hist[ 2]: 18574 hist[ 3]: 79 - hist[ 4]: 14 hist[ 5]: 1 hist[ 6]: 0 hist[ 7]: 1 - hist[ 8]: 0 hist[ 9]: 7 - -// Hany kikuldendo csomag volt mar a Tx-ringben amikor ujabb lett irva bele: - - Tx ring histogram: - hist[ 0]: 2329 hist[ 1]: 0 hist[ 2]: 0 hist[ 3]: 0 - -// Az E1-interfesz hiba-szamlaloi, az rfc2495-nek megfeleloen: -// (kb. a Cisco routerek "show controllers e1" formatumaban: http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126) - -Data in current interval (91 seconds elapsed): - 9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors - 0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs -Data in Interval 1 (15 minutes): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Data in last 4 intervals (1 hour): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Data in last 96 intervals (24 hours): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs - ------------------------------------------------------------------ - -Nehany kulonlegesebb beallitasi lehetoseg (idovel beepulhetnek majd a driverbe): -Ezekkel sok galibat lehet okozni, nagyon ovatosan kell oket hasznalni! - - modified CRC-4, for improved interworking of CRC-4 and non-CRC-4 - devices: (lasd page 107 es g706 Annex B) - lbireg[ 0x1b ] |= 0x08 - lbireg[ 0x1c ] |= 0xc0 - - ilyenkor ertelmezett az NMF - 'No Multiframe alignment Found after - 400 msec' alarm. - - FALC - a vonali meghajto IC - local loop - a sajat adasomat halljam vissza - remote loop - a kivulrol jovo adast adom vissza - - Egy hibakeresesre hasznalhato dolog: - - 1-es timeslot local loop a FALC-ban: echo >lbireg 0x1d 0x21 - - local loop kikapcsolasa: echo >lbireg 0x1d 0x00 diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt deleted file mode 100644 index c82c0cf981b4..000000000000 --- a/Documentation/networking/slicecom.txt +++ /dev/null @@ -1,369 +0,0 @@ - -SliceCOM adapter user's documentation - for the 0.51 driver version - -Written by Bartók István - -English translation: Lakatos György -Mon Dec 11 15:28:42 CET 2000 - -Last modified: Wed Aug 29 17:25:37 CEST 2001 - ------------------------------------------------------------------ - -Usage: - -Compiling the kernel: - -Code maturity level options - [*] Prompt for development and/or incomplete code/drivers - -Network device support - Wan interfaces - MultiGate (COMX) synchronous - Support for MUNICH based boards: SliceCOM, PCICOM (NEW) - Support for HDLC and syncPPP... - - -Loading the modules: - -modprobe comx - -modprobe comx-proto-ppp # module for Cisco-HDLC and SyncPPP protocols - -modprobe comx-hw-munich # the module logs information by the kernel - # about the detected boards - - -Configuring the board: - -# This interface will use the Cisco-HDLC line protocol, -# the timeslices assigned are 1,2 (128 KiBit line speed) -# (the first data timeslice in the G.703 frame is no. 1) -# -mkdir /proc/comx/comx0.1/ -echo slicecom >/proc/comx/comx0.1/boardtype -echo hdlc >/proc/comx/comx0.1/protocol -echo 1 2 >/proc/comx/comx0.1/timeslots - - -# This interface uses SyncPPP line protocol, the assigned -# is no. 3 (64 KiBit line speed) -# -mkdir /proc/comx/comx0.2/ -echo slicecom >/proc/comx/comx0.2/boardtype -echo ppp >/proc/comx/comx0.2/protocol -echo 3 >/proc/comx/comx0.2/timeslots - -... - -ifconfig comx0.1 up -ifconfig comx0.2 up - ------------------------------------------------------------------ - -The COMX interfaces use a 10 packet transmit queue by default, however WAN -networks sometimes use bigger values (20 to 100), to utilize the line better -by large traffic (though the line delay increases because of more packets -join the queue). - -# ifconfig comx0 txqueuelen 50 - -This option is only supported by the ifconfig command of the later -distributions, which came with 2.2 kernels, such as RedHat 6.1 or Debian 2.2. - -You can download a newer netbase packet from -http://www.debian.org/~rcw/2.2/netbase/ for Debian 2.1, which has a new -ifconfig. You can get further information about using 2.2 kernel with -Debian 2.1 from http://www.debian.org/releases/stable/running-kernel-2.2 - ------------------------------------------------------------------ - -The SliceCom LEDs: - -red - on, if the interface is unconfigured, or it gets Remote Alarm-s -green - on, if the board finds frame-sync in the received signal - -A bit more detailed: - -red: green: meaning: - -- - no frame-sync, no signal received, or signal SNAFU. -- on "Everything is OK" -on on Reception is ok, but the remote end sends Remote Alarm -on - The interface is unconfigured - ------------------------------------------------------------------ - -A more detailed description of the hardware setting options: - -The general and the protocol layer options described in the 'comx.txt' file -apply to the SliceCom as well, I only summarize the SliceCom hardware specific -settings below. - -The '/proc/comx' configuring interface: - -An interface directory should be created for every timeslot group with -'mkdir', e,g: 'comx0', 'comx1' etc. The timeslots can be assigned here to the -specific interface. The Cisco-like naming convention (serial3:1 - first -timeslot group of the 3rd. board) can't be used here, because these mean IP -aliasing in Linux. - -You can give any meaningful name to keep the configuration clear; -e.g: 'comx0.1', 'comx0.2', 'comx1.1', comx1.2', if you have two boards -with two interfaces each. - -Settings, which apply to the board: - -Neither 'io' nor 'irq' settings required, the driver uses the resources -given by the PCI BIOS. - -comx0/boardnum - board number of the SliceCom in the PC (using the 'natural' - PCI order) as listed in '/proc/pci' or the output of the - 'lspci' command, generally the slots nearer to the motherboard - PCI driver chips have the lower numbers. - - Default: 0 (the counting starts with 0) - -Though the options below are to be set on a single interface, they apply to the -whole board. The restriction, to use them on 'UP' interfaces, is because the -command sequence below could lead to unpredictable results. - - # echo 0 >boardnum - # echo internal >clock_source - # echo 1 >boardnum - -The sequence would set the clock source of board 0. - -These settings will persist after all the interfaces are cleared, but are -cleared when the driver module is unloaded and loaded again. - -comx0/clock_source - source of the transmit clock - Usage: - - # echo line >/proc/comx/comx0/clock_source - # echo internal >/proc/comx/comx0/clock_source - - line - The Tx clock is being decoded if the input data stream, - if no clock seen on the input, then the board will use it's - own clock generator. - - internal - The Tx clock is supplied by the builtin clock generator. - - Default: line - - Normally, the telecommunication company's end device (the HDSL - modem) provides the Tx clock, that's why 'line' is the default. - -comx0/framing - Switching CRC4 off/on - - CRC4: 16 PCM frames (The 32 64Kibit channels are multiplexed into a - PCM frame, nothing to do with HDLC frames) are divided into 2x8 - groups, each group has a 4 bit CRC. - - # echo crc4 >/proc/comx/comx0/framing - # echo no-crc4 >/proc/comx/comx0/framing - - Default is 'crc4', the Hungarian MATAV lines behave like this. - The traffic generally passes if this setting on both ends don't match. - -comx0/linecode - Setting the line coding - - # echo hdb3 >/proc/comx/comx0/linecode - # echo ami >/proc/comx/comx0/linecode - - Default a 'hdb3', MATAV lines use this. - - (AMI coding is rarely used with E1 lines). Frame sync may occur, if - this setting doesn't match the other end's, but CRC4 and data errors - will come, which will result in CRC errors on HDLC/SyncPPP level. - -comx0/reg - direct access to the board's MUNICH (reg) and FALC (lbireg) -comx0/lbireg circuit's registers - - # echo >reg 0x04 0x0 - write 0 to register 4 - # echo >reg 0x104 - write the contents of register 4 with - printk() to syslog - -WARNING! These are only for development purposes, messing with this will - result much trouble! - -comx0/loopback - Places a loop to the board's G.703 signals - - # echo none >/proc/comx/comx0/loopback - # echo local >/proc/comx/comx0/loopback - # echo remote >/proc/comx/comx0/loopback - - none - normal operation, no loop - local - the board receives it's own output - remote - the board sends the received data to the remote side - - Default: none - ------------------------------------------------------------------ - -Interface (channel group in Cisco terms) settings: - -comx0/timeslots - which timeslots belong to the given interface - - Setting: - - # echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots - - # cat /proc/comx/comx0/timeslots - 1 2 5 6 7 8 - # - - Finding a timeslot: - - # grep ' 4' /proc/comx/comx*/timeslots - /proc/comx/comx0/timeslots:1 3 4 5 6 - # - - The timeslots can be in any order, '1 2 3' is the same as '1 3 2'. - - The interface has to be DOWN during the setting ('ifconfig comx0 - down'), but the other interfaces could operate normally. - - The driver checks if the assigned timeslots are vacant, if not, then - the setting won't be applied. - - The timeslot values are treated as decimal numbers, not to misunderstand - values of 08, 09 form. - ------------------------------------------------------------------ - -Checking the interface and board status: - -- Lines beginning with ' ' (space) belong to the original output, the lines -which begin with '//' are the comments. - - papaya:~$ cat /proc/comx/comx1/status - Interface administrative status is UP, modem status is UP, protocol is UP - Modem status changes: 0, Transmitter status is IDLE, tbusy: 0 - Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m) - (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m) - Debug flags: none - RX errors: len: 22, overrun: 1, crc: 0, aborts: 0 - buffer overrun: 0, pbuffer overrun: 0 - TX errors: underrun: 0 - Line keepalive (value: 10) status UP [0] - -// The hardware specific part starts here: - Controller status: - No alarms - -// Alarm: -// -// No alarms - Everything OK -// -// LOS - Loss Of Signal - No signal sensed on the input -// AIS - Alarm Indication Signal - The remote side sends '11111111'-s, -// it tells, that there's an error condition, or it's not -// initialised. -// AUXP - Auxiliary Pattern Indication - 01010101.. received. -// LFA - Loss of Frame Alignment - no frame sync received. -// RRA - Receive Remote Alarm - the remote end's OK, but signals error cond. -// LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync. -// NMF - No Multiframe alignment Found after 400 msec - no such alarm using -// no-crc4 or crc4 framing, see below. -// -// Other possible error messages: -// -// Transmit Line Short - the board felt, that it's output is short-circuited, -// so it switched the transmission off. (The board can't definitely tell, -// that it's output is short-circuited.) - -// Chained list of the received packets, for debug purposes: - - Rx ring: - rafutott: 0 - lastcheck: 50845731, jiffies: 51314281 - base: 017b1858 - rx_desc_ptr: 0 - rx_desc_ptr: 017b1858 - hw_curr_ptr: 017b1858 - 06040000 017b1868 017b1898 c016ff00 - 06040000 017b1878 017b1e9c c016ff00 - 46040000 017b1888 017b24a0 c016ff00 - 06040000 017b1858 017b2aa4 c016ff00 - -// All the interfaces using the board: comx1, using the 1,2,...16 timeslots, -// comx2, using timeslot 17, etc. - - Interfaces using this board: (channel-group, interface, timeslots) - 0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 1 comx2: 17 - 2 comx3: 18 - 3 comx4: 19 - 4 comx5: 20 - 5 comx6: 21 - 6 comx7: 22 - 7 comx8: 23 - 8 comx9: 24 - 9 comx10: 25 - 10 comx11: 26 - 11 comx12: 27 - 12 comx13: 28 - 13 comx14: 29 - 14 comx15: 30 - 15 comx16: 31 - -// The number of events handled by the driver during an interrupt cycle: - - Interrupt work histogram: - hist[ 0]: 0 hist[ 1]: 2 hist[ 2]: 18574 hist[ 3]: 79 - hist[ 4]: 14 hist[ 5]: 1 hist[ 6]: 0 hist[ 7]: 1 - hist[ 8]: 0 hist[ 9]: 7 - -// The number of packets to send in the Tx ring, when a new one arrived: - - Tx ring histogram: - hist[ 0]: 2329 hist[ 1]: 0 hist[ 2]: 0 hist[ 3]: 0 - -// The error counters of the E1 interface, according to the RFC2495, -// (similar to the Cisco "show controllers e1" command's output: -// http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126) - -Data in current interval (91 seconds elapsed): - 9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors - 0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs -Data in Interval 1 (15 minutes): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Data in last 4 intervals (1 hour): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Data in last 96 intervals (24 hours): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs - ------------------------------------------------------------------ - -Some unique options, (may get into the driver later): -Treat them very carefully, these can cause much trouble! - - modified CRC-4, for improved interworking of CRC-4 and non-CRC-4 - devices: (see page 107 and g706 Annex B) - lbireg[ 0x1b ] |= 0x08 - lbireg[ 0x1c ] |= 0xc0 - - - The NMF - 'No Multiframe alignment Found after 400 msec' alarm - comes into account. - - FALC - the line driver chip. - local loop - I hear my transmission back. - remote loop - I echo the remote transmission back. - - Something useful for finding errors: - - - local loop for timeslot 1 in the FALC chip: - - # echo >lbireg 0x1d 0x21 - - - Switching the loop off: - - # echo >lbireg 0x1d 0x00 -- cgit v1.2.2