From 5c05917e7fe313a187ad6ebb94c1c6cf42862a0b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 24 Jul 2008 17:29:40 -0700 Subject: x86: usb debug port early console, v4 based on work from Eric, and add some timeout so don't dead loop when debug device is not installed v2: fix checkpatch warning v3: move ehci struct def to linux/usrb/ehci_def.h from host/ehci.h also add CONFIG_EARLY_PRINTK_DBGP to disable it by default v4: address comments from Ingo, seperate ehci reg def moving to another patch also add auto detect port that connect to debug device for Nvidia southbridge Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Andi Kleen Cc: "Arjan van de Ven" Cc: "Eric W. Biederman" Cc: "Greg KH" Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e7bea3e85304..92ddd4afe174 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -657,11 +657,12 @@ and is between 256 and 4096 characters. It is defined in the file earlyprintk= [X86-32,X86-64,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] + earlyprintk=dbgp Append ",keep" to not disable it when the real console takes over. - Only vga or serial at a time, not both. + Only vga or serial or usb debug port at a time. Currently only ttyS0 and ttyS1 are supported. -- cgit v1.2.2 From 5394f80f92642c61fc2a95385be85f2fdcfb5adb Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sun, 7 Sep 2008 01:51:32 -0700 Subject: x86: check for and defend against BIOS memory corruption Some BIOSes have been observed to corrupt memory in the low 64k. This change: - Reserves all memory which does not have to be in that area, to prevent it from being used as general memory by the kernel. Things like the SMP trampoline are still in the memory, however. - Clears the reserved memory so we can observe changes to it. - Adds a function check_for_bios_corruption() which checks and reports on memory becoming unexpectedly non-zero. Currently it's called in the x86 fault handler, and the powermanagement debug output. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1150444a21ab..df48af505d15 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -360,6 +360,11 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,, See header of drivers/net/hamradio/baycom_ser_hdx.c. + bios_corruption_check=0/1 [X86] + Some BIOSes seem to corrupt the first 64k of memory + when doing things like suspend/resume. Setting this + option will scan the memory looking for corruption. + boot_delay= Milliseconds to delay each printk during boot. Values larger than 10 seconds (10000) are changed to no delay (0). -- cgit v1.2.2 From 9f077871ce7237e2387fc76542b3b4033cb05e49 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sun, 7 Sep 2008 01:51:34 -0700 Subject: x86: clean up memory corruption check and add more kernel parameters The corruption check is enabled in Kconfig by default, but disabled at runtime. This patch adds several kernel parameters to control the corruption check's behaviour; these are documented in kernel-parameters.txt. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index df48af505d15..6a2629d00598 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -360,11 +360,6 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,, See header of drivers/net/hamradio/baycom_ser_hdx.c. - bios_corruption_check=0/1 [X86] - Some BIOSes seem to corrupt the first 64k of memory - when doing things like suspend/resume. Setting this - option will scan the memory looking for corruption. - boot_delay= Milliseconds to delay each printk during boot. Values larger than 10 seconds (10000) are changed to no delay (0). @@ -1233,6 +1228,29 @@ and is between 256 and 4096 characters. It is defined in the file or memmap=0x10000$0x18690000 + memory_corruption_check=0/1 [X86] + Some BIOSes seem to corrupt the first 64k of + memory when doing things like suspend/resume. + Setting this option will scan the memory + looking for corruption. Enabling this will + both detect corruption and prevent the kernel + from using the memory being corrupted. + However, its intended as a diagnostic tool; if + repeatable BIOS-originated corruption always + affects the same memory, you can use memmap= + to prevent the kernel from using that memory. + + memory_corruption_check_size=size [X86] + By default it checks for corruption in the low + 64k, making this memory unavailable for normal + use. Use this parameter to scan for + corruption in more or less memory. + + memory_corruption_check_period=seconds [X86] + By default it checks for corruption every 60 + seconds. Use this parameter to check at some + other rate. 0 disables periodic checking. + memtest= [KNL,X86] Enable memtest Format: range: 0,4 : pattern number -- cgit v1.2.2