From beb1b6bbf2b448b97b9611200eb4b5a555336c60 Mon Sep 17 00:00:00 2001 From: Steven King Date: Thu, 27 May 2010 19:58:56 +0200 Subject: hwmon: Driver for TI TMP102 temperature sensor Driver for the TI TMP102. The TI TMP102 is similar to the LM75. It differs from the LM75 by having a 16-bit conf register and the temp registers have a minimum resolution of 12 bits; the extended conf register can select 13-bit resolution (which this driver does) and also change the update rate (which this driver currently doesn't use). [JD: Fix tmp102_exit tag, must be __exit, not __init.] Signed-off-by: Steven King Signed-off-by: Jean Delvare --- Documentation/hwmon/tmp102 | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/hwmon/tmp102 (limited to 'Documentation/hwmon') diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102 new file mode 100644 index 000000000000..239dded8539f --- /dev/null +++ b/Documentation/hwmon/tmp102 @@ -0,0 +1,27 @@ +Kernel driver tmp102 +==================== + +Supported chips: + * Texas Instruments TMP102 + Prefix: 'tmp102' + Addresses scanned: I2C 0x48 0x49 0x4a 0x4b + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html + +Author: + Steven King + +Description +----------- + +The Texas Instruments TMP102 implements one temperature sensor. Limits can be +set through the Overtemperature Shutdown register and Hysteresis register. The +sensor is accurate to 0.5 degrees over the range of -25 to +85 C, and to 1.0 +degrees from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The +operating temperature has a minimum of -55 C and a maximum of +150 C. + +The TMP102 has a programmable update rate that can select between 8, 4, 1, and +0.5 Hz. (Currently the driver only supports the default of 4 Hz). + +The driver provides the common sysfs-interface for temperatures (see +/Documentation/hwmon/sysfs-interface under Temperatures). + -- cgit v1.2.2