From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/fb/intel810.txt | 272 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 272 insertions(+) create mode 100644 Documentation/fb/intel810.txt (limited to 'Documentation/fb/intel810.txt') diff --git a/Documentation/fb/intel810.txt b/Documentation/fb/intel810.txt new file mode 100644 index 000000000000..fd68b162e4a1 --- /dev/null +++ b/Documentation/fb/intel810.txt @@ -0,0 +1,272 @@ +Intel 810/815 Framebuffer driver + Tony Daplas + http://i810fb.sourceforge.net + + March 17, 2002 + + First Released: July 2001 +================================================================ + +A. Introduction + This is a framebuffer driver for various Intel 810/815 compatible +graphics devices. These would include: + + Intel 810 + Intel 810E + Intel 810-DC100 + Intel 815 Internal graphics only, 100Mhz FSB + Intel 815 Internal graphics only + Intel 815 Internal graphics and AGP + +B. Features + + - Choice of using Discrete Video Timings, VESA Generalized Timing + Formula, or a framebuffer specific database to set the video mode + + - Supports a variable range of horizontal and vertical resolution, and + vertical refresh rates if the VESA Generalized Timing Formula is + enabled. + + - Supports color depths of 8, 16, 24 and 32 bits per pixel + + - Supports pseudocolor, directcolor, or truecolor visuals + + - Full and optimized hardware acceleration at 8, 16 and 24 bpp + + - Robust video state save and restore + + - MTRR support + + - Utilizes user-entered monitor specifications to automatically + calculate required video mode parameters. + + - Can concurrently run with xfree86 running with native i810 drivers + + - Hardware Cursor Support + +C. List of available options + + a. "video=i810fb" + enables the i810 driver + + Recommendation: required + + b. "xres:" + select horizontal resolution in pixels + + Recommendation: user preference + (default = 640) + + c. "yres:" + select vertical resolution in scanlines. If Discrete Video Timings + is enabled, this will be ignored and computed as 3*xres/4. + + Recommendation: user preference + (default = 480) + + d. "vyres:" + select virtual vertical resolution in scanlines. If (0) or none + is specified, this will be computed against maximum available memory. + + Recommendation: do not set + (default = 480) + + e. "vram:" + select amount of system RAM in MB to allocate for the video memory + + Recommendation: 1 - 4 MB. + (default = 4) + + f. "bpp:" + select desired pixel depth + + Recommendation: 8 + (default = 8) + + g. "hsync1/hsync2:" + select the minimum and maximum Horizontal Sync Frequency of the + monitor in KHz. If a using a fixed frequency monitor, hsync1 must + be equal to hsync2. + + Recommendation: check monitor manual for correct values + default (29/30) + + h. "vsync1/vsync2:" + select the minimum and maximum Vertical Sync Frequency of the monitor + in Hz. You can also use this option to lock your monitor's refresh + rate. + + Recommendation: check monitor manual for correct values + (default = 60/60) + + IMPORTANT: If you need to clamp your timings, try to give some + leeway for computational errors (over/underflows). Example: if + using vsync1/vsync2 = 60/60, make sure hsync1/hsync2 has at least + a 1 unit difference, and vice versa. + + i. "voffset:" + select at what offset in MB of the logical memory to allocate the + framebuffer memory. The intent is to avoid the memory blocks + used by standard graphics applications (XFree86). The default + offset (16 MB for a 64MB aperture, 8 MB for a 32MB aperture) will + avoid XFree86's usage and allows up to 7MB/15MB of framebuffer + memory. Depending on your usage, adjust the value up or down, + (0 for maximum usage, 31/63 MB for the least amount). Note, an + arbitrary setting may conflict with XFree86. + + Recommendation: do not set + (default = 8 or 16 MB) + + j. "accel" + enable text acceleration. This can be enabled/reenabled anytime + by using 'fbset -accel true/false'. + + Recommendation: enable + (default = not set) + + k. "mtrr" + enable MTRR. This allows data transfers to the framebuffer memory + to occur in bursts which can significantly increase performance. + Not very helpful with the i810/i815 because of 'shared memory'. + + Recommendation: do not set + (default = not set) + + l. "extvga" + if specified, secondary/external VGA output will always be enabled. + Useful if the BIOS turns off the VGA port when no monitor is attached. + The external VGA monitor can then be attached without rebooting. + + Recommendation: do not set + (default = not set) + + m. "sync" + Forces the hardware engine to do a "sync" or wait for the hardware + to finish before starting another instruction. This will produce a + more stable setup, but will be slower. + + Recommendation: do not set + (default = not set) + + n. "dcolor" + Use directcolor visual instead of truecolor for pixel depths greater + than 8 bpp. Useful for color tuning, such as gamma control. + + Recommendation: do not set + (default = not set) + +D. Kernel booting + +Separate each option/option-pair by commas (,) and the option from its value +with a colon (:) as in the following: + +video=i810fb:option1,option2:value2 + +Sample Usage +------------ + +In /etc/lilo.conf, add the line: + +append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,hsync2:55, \ + vsync1:50,vsync2:85,accel,mtrr" + +This will initialize the framebuffer to 1024x768 at 8bpp. The framebuffer +will use 2 MB of System RAM. MTRR support will be enabled. The refresh rate +will be computed based on the hsync1/hsync2 and vsync1/vsync2 values. + +IMPORTANT: +You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes +better than 640x480 at 60Hz. + +E. Module options + + The module parameters are essentially similar to the kernel +parameters. The main difference is that you need to include a Boolean value +(1 for TRUE, and 0 for FALSE) for those options which don't need a value. + +Example, to enable MTRR, include "mtrr=1". + +Sample Usage +------------ + +Using the same setup as described above, load the module like this: + + modprobe i810fb vram=2 xres=1024 bpp=8 hsync1=30 hsync2=55 vsync1=50 \ + vsync2=85 accel=1 mtrr=1 + +Or just add the following to /etc/modprobe.conf + + options i810fb vram=2 xres=1024 bpp=16 hsync1=30 hsync2=55 vsync1=50 \ + vsync2=85 accel=1 mtrr=1 + +and just do a + + modprobe i810fb + + +F. Setup + + a. Do your usual method of configuring the kernel. + + make menuconfig/xconfig/config + + b. Under "Code Maturity Options", enable "Prompt for experimental/ + incomplete code/drivers". + + c. Enable agpgart support for the Intel 810/815 on-board graphics. + This is required. The option is under "Character Devices" + + d. Under "Graphics Support", select "Intel 810/815" either statically + or as a module. Choose "use VESA GTF for video timings" if you + need to maximize the capability of your display. To be on the + safe side, you can leave this unselected. + + e. If you want a framebuffer console, enable it under "Console + Drivers" + + f. Compile your kernel. + + g. Load the driver as described in section D and E. + + Optional: + h. If you are going to run XFree86 with its native drivers, the + standard XFree86 4.1.0 and 4.2.0 drivers should work as is. + However, there's a bug in the XFree86 i810 drivers. It attempts + to use XAA even when switched to the console. This will crash + your server. I have a fix at this site: + + http://i810fb.sourceforge.net. + + You can either use the patch, or just replace + + /usr/X11R6/lib/modules/drivers/i810_drv.o + + with the one provided at the website. + + i. Try the DirectFB (http://www.directfb.org) + the i810 gfxdriver + patch to see the chipset in action (or inaction :-). + +G. Acknowledgment: + + 1. Geert Uytterhoeven - his excellent howto and the virtual + framebuffer driver code made this possible. + + 2. Jeff Hartmann for his agpgart code. + + 3. The X developers. Insights were provided just by reading the + XFree86 source code. + + 4. Intel(c). For this value-oriented chipset driver and for + providing documentation. + + 5. Matt Sottek. His inputs and ideas helped in making some + optimizations possible. + +H. Home Page: + + A more complete, and probably updated information is provided at +http://i810fb.sourceforge.net. + +########################### +Tony + -- cgit v1.2.2