From 8c369264b6de3b2ab796f330a4d85770a6b8b033 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 3 Aug 2011 18:12:05 +0100 Subject: ARM: 7009/1: l2x0: Add OF based initialization This adds probing for ARM L2x0 cache controllers via device tree. Support includes the L210, L220, and PL310 controllers. The binding allows setting up cache RAM latencies and filter addresses (PL310 only). Signed-off-by: Rob Herring Acked-by: Grant Likely Acked-by: Arnd Bergmann Acked-by: Olof Johansson Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Russell King --- Documentation/devicetree/bindings/arm/l2cc.txt | 42 ++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/l2cc.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt new file mode 100644 index 000000000000..f50e021a0998 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -0,0 +1,42 @@ +* ARM L2 Cache Controller + +ARM cores often have a separate level 2 cache controller. There are various +implementations of the L2 cache controller with compatible programming models. +The ARM L2 cache representation in the device tree should be done as follows: + +Required properties: + +- compatible : should be one of: + "arm,pl310-cache" + "arm,l220-cache" + "arm,l210-cache" +- cache-unified : Specifies the cache is a unified cache. +- cache-level : Should be set to 2 for a level 2 cache. +- reg : Physical base address and size of cache controller's memory mapped + registers. + +Optional properties: + +- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of + read, write and setup latencies. Minimum valid values are 1. Controllers + without setup latency control should use a value of 0. +- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of + read, write and setup latencies. Controllers without setup latency control + should use 0. Controllers without separate read and write Tag RAM latency + values should only use the first cell. +- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell. +- arm,filter-ranges : Starting address and length of window to + filter. Addresses in the filter window are directed to the M1 port. Other + addresses will go to the M0 port. + +Example: + +L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + arm,filter-latency = <0x80000000 0x8000000>; + cache-unified; + cache-level = <2>; +}; -- cgit v1.2.2 From 8d4e652d1b2539196efaef051956fa29e22e9c10 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 17 Aug 2011 18:03:17 +0100 Subject: ARM: 7023/1: L2x0: Add interrupts property to OF binding Following the discussion here: http://lists.ozlabs.org/pipermail/devicetree-discuss/2011-August/007301.html The L2x0 L2 Cache Controllers support a combined interrupt line which can be used for several events (e.g. read/write/parity errors on tag/data RAM, event counter increment/overflow). Unfortunately the OF binding added in c519ecf2 ("ARM: 7009/1: l2x0: Add OF based initialization") does not represent the interrupt. This patch adds an "interrupts" property to the L2x0 OF binding, representing the combined interrupt line. Signed-off-by: Mark Rutland Acked-by: Rob Herring Acked-by: Will Deacon Cc: Grant Likely Cc: Arnd Bergmann Cc: Olof Johansson Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: Russell King --- Documentation/devicetree/bindings/arm/l2cc.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index f50e021a0998..7ca52161e7ab 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -28,6 +28,7 @@ Optional properties: - arm,filter-ranges : Starting address and length of window to filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. +- interrupts : 1 combined interrupt. Example: @@ -39,4 +40,5 @@ L2: cache-controller { arm,filter-latency = <0x80000000 0x8000000>; cache-unified; cache-level = <2>; + interrupts = <45>; }; -- cgit v1.2.2 From 253d7addbcb06acc90eb722f122d32a6ccbf67a7 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 10 Aug 2011 15:22:11 -0500 Subject: ARM: highbank: add devicetree source This adds the devicetree source and documentation for the Calxeda highbank platform. Signed-off-by: Rob Herring Reviewed-by: Jamie Iles Reviewed-by: Shawn Guo --- Documentation/devicetree/bindings/arm/calxeda.txt | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/calxeda.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt new file mode 100644 index 000000000000..4755caaccba6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda.txt @@ -0,0 +1,8 @@ +Calxeda Highbank Platforms Device Tree Bindings +----------------------------------------------- + +Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following +properties. + +Required root node properties: + - compatible = "calxeda,highbank"; -- cgit v1.2.2