From 6e3be9bbeaa841eb65fa7570e0c542b2c1483fca Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 3 Sep 2014 13:44:27 -0700 Subject: spi/rockchip: Mark DMA as optional The Rockchip SPI controller works fine without DMA (aside from a few warnings). The DMA property even implies this, saying: DMA request names should include "tx" and "rx" if present. Officially mark the properties as optional. Signed-off-by: Doug Anderson Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-rockchip.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/spi') diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index 7bab35575817..467dec441c62 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -16,11 +16,15 @@ Required Properties: - clocks: Must contain an entry for each entry in clock-names. - clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for the peripheral clock. +- #address-cells: should be 1. +- #size-cells: should be 0. + +Optional Properties: + - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. -- #address-cells: should be 1. -- #size-cells: should be 0. + Example: -- cgit v1.2.2