From c0046867f34bb81ec3f237ebbc5241ae678b8379 Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Mon, 21 Mar 2011 17:59:37 +0100 Subject: hwmon: (ads1015) Make gain and datarate configurable Configuration for ads1015 gain and datarate is possible via devicetree or platform data. This is a followup patch to previous ads1015 patches on Jean Delvares tree. Signed-off-by: Dirk Eibach Signed-off-by: Jean Delvare --- .../devicetree/bindings/hwmon/ads1015.txt | 88 ++++++++++++++++------ 1 file changed, 66 insertions(+), 22 deletions(-) (limited to 'Documentation/devicetree/bindings/hwmon') diff --git a/Documentation/devicetree/bindings/hwmon/ads1015.txt b/Documentation/devicetree/bindings/hwmon/ads1015.txt index 0f30616384c5..918a507d1159 100644 --- a/Documentation/devicetree/bindings/hwmon/ads1015.txt +++ b/Documentation/devicetree/bindings/hwmon/ads1015.txt @@ -5,25 +5,69 @@ This device is a 12-bit A-D converter with 4 inputs. The inputs can be used single ended or in certain differential combinations. For configuration all possible combinations are mapped to 8 channels: -0: Voltage over AIN0 and AIN1. -1: Voltage over AIN0 and AIN3. -2: Voltage over AIN1 and AIN3. -3: Voltage over AIN2 and AIN3. -4: Voltage over AIN0 and GND. -5: Voltage over AIN1 and GND. -6: Voltage over AIN2 and GND. -7: Voltage over AIN3 and GND. - -Optional properties: - - - exported-channels : exported_channels is a bitmask that specifies which - channels should be accessable by the user. - -Example: -ads1015@49 { - compatible = "ti,ads1015"; - reg = <0x49>; - exported-channels = <0x14>; -}; - -In this example only channel 2 and 4 would be accessable by the user. + 0: Voltage over AIN0 and AIN1. + 1: Voltage over AIN0 and AIN3. + 2: Voltage over AIN1 and AIN3. + 3: Voltage over AIN2 and AIN3. + 4: Voltage over AIN0 and GND. + 5: Voltage over AIN1 and GND. + 6: Voltage over AIN2 and GND. + 7: Voltage over AIN3 and GND. + +Each channel can be configured individually: + - pga is the programmable gain amplifier (values are full scale) + 0: +/- 6.144 V + 1: +/- 4.096 V + 2: +/- 2.048 V (default) + 3: +/- 1.024 V + 4: +/- 0.512 V + 5: +/- 0.256 V + - data_rate in samples per second + 0: 128 + 1: 250 + 2: 490 + 3: 920 + 4: 1600 (default) + 5: 2400 + 6: 3300 + +1) The /ads1015 node + + Required properties: + + - compatible : must be "ti,ads1015" + - reg : I2C bus address of the device + - #address-cells : must be <1> + - #size-cells : must be <0> + + The node contains child nodes for each channel that the platform uses. + + Example ADS1015 node: + + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + [ child node definitions... ] + } + +2) channel nodes + + Required properties: + + - reg : the channel number + + Optional properties: + + - ti,gain : the programmable gain amplifier setting + - ti,datarate : the converter data rate + + Example ADS1015 channel node: + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <5>; + }; -- cgit v1.2.2