From 1a21dfed63515faeb2cda334fbf00787b92d7771 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 08:47:11 +0900 Subject: clk: samsung: exynos5433: Add binding document for Exynos5433 clock domains This patch adds devicetree binding document for Exynos5433 SoC system clock controller. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 305 +++++++++++++++++++++ 1 file changed, 305 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/exynos5433-clock.txt (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt new file mode 100644 index 000000000000..9e7ed2d43a15 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -0,0 +1,305 @@ +* Samsung Exynos5433 CMU (Clock Management Units) + +The Exynos5433 clock controller generates and supplies clock to various +controllers within the Exynos5433 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP + which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS + domains and bus clocks. + - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF + which generates clocks for LLI (Low Latency Interface) IP. + - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF + which generates clocks for DRAM Memory Controller domain. + - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC + which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs. + - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS + which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs. + - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS + which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs. + - "samsung,exynos5433-cmu-g2d" - clock controller compatible for CMU_G2D + which generates clocks for G2D/MDMA IPs. + - "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP + which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs. + - "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD + which generates clocks for Cortex-A5/BUS/AUDIO clocks. + - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1" + and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS + which generates global data buses clock and global peripheral buses clock. + - "samsung,exynos5433-cmu-g3d" - clock controller compatible for CMU_G3D + which generates clocks for 3D Graphics Engine IP. + - "samsung,exynos5433-cmu-gscl" - clock controller compatible for CMU_GSCL + which generates clocks for GSCALER IPs. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +- clocks: list of the clock controller input clock identifiers, + from common clock bindings. Please refer the next section + to find the input clocks for a given controller. + +- clock-names: list of the clock controller input clock names, + as described in clock-bindings.txt. + + Input clocks for top clock controller: + - oscclk + - sclk_mphy_pll + - sclk_mfc_pll + - sclk_bus_pll + + Input clocks for cpif clock controller: + - oscclk + + Input clocks for mif clock controller: + - oscclk + - sclk_mphy_pll + + Input clocks for fsys clock controller: + - oscclk + - sclk_ufs_mphy + - div_aclk_fsys_200 + - sclk_pcie_100_fsys + - sclk_ufsunipro_fsys + - sclk_mmc2_fsys + - sclk_mmc1_fsys + - sclk_mmc0_fsys + - sclk_usbhost30_fsys + - sclk_usbdrd30_fsys + + Input clocks for g2d clock controller: + - oscclk + - aclk_g2d_266 + - aclk_g2d_400 + + Input clocks for disp clock controller: + - oscclk + - sclk_dsim1_disp + - sclk_dsim0_disp + - sclk_dsd_disp + - sclk_decon_tv_eclk_disp + - sclk_decon_vclk_disp + - sclk_decon_eclk_disp + - sclk_decon_tv_vclk_disp + - aclk_disp_333 + + Input clocks for bus0 clock controller: + - aclk_bus0_400 + + Input clocks for bus1 clock controller: + - aclk_bus1_400 + + Input clocks for bus2 clock controller: + - oscclk + - aclk_bus2_400 + + Input clocks for g3d clock controller: + - oscclk + - aclk_g3d_400 + + Input clocks for gscl clock controller: + - oscclk + - aclk_gscl_111 + - aclk_gscl_333 + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos5433.h header and can be used in device +tree sources. + +Example 1: Examples of 'oscclk' source clock node are listed below. + + xxti: xxti { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + +Example 2: Examples of clock controller nodes are listed below. + + cmu_top: clock-controller@10030000 { + compatible = "samsung,exynos5433-cmu-top"; + reg = <0x10030000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll", + "sclk_mfc_pll", + "sclk_bus_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>, + <&cmu_mif CLK_SCLK_MFC_PLL>, + <&cmu_mif CLK_SCLK_BUS_PLL>; + }; + + cmu_cpif: clock-controller@10fc0000 { + compatible = "samsung,exynos5433-cmu-cpif"; + reg = <0x10fc0000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk"; + clocks = <&xxti>; + }; + + cmu_mif: clock-controller@105b0000 { + compatible = "samsung,exynos5433-cmu-mif"; + reg = <0x105b0000 0x100c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>; + }; + + cmu_peric: clock-controller@14c80000 { + compatible = "samsung,exynos5433-cmu-peric"; + reg = <0x14c80000 0x0b08>; + #clock-cells = <1>; + }; + + cmu_peris: clock-controller@10040000 { + compatible = "samsung,exynos5433-cmu-peris"; + reg = <0x10040000 0x0b20>; + #clock-cells = <1>; + }; + + cmu_fsys: clock-controller@156e0000 { + compatible = "samsung,exynos5433-cmu-fsys"; + reg = <0x156e0000 0x0b04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_ufs_mphy", + "div_aclk_fsys_200", + "sclk_pcie_100_fsys", + "sclk_ufsunipro_fsys", + "sclk_mmc2_fsys", + "sclk_mmc1_fsys", + "sclk_mmc0_fsys", + "sclk_usbhost30_fsys", + "sclk_usbdrd30_fsys"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_UFS_MPHY>, + <&cmu_top CLK_DIV_ACLK_FSYS_200>, + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, + <&cmu_top CLK_SCLK_MMC2_FSYS>, + <&cmu_top CLK_SCLK_MMC1_FSYS>, + <&cmu_top CLK_SCLK_MMC0_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; + }; + + cmu_g2d: clock-controller@12460000 { + compatible = "samsung,exynos5433-cmu-g2d"; + reg = <0x12460000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_g2d_266", + "aclk_g2d_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_G2D_266>, + <&cmu_top CLK_ACLK_G2D_400>; + }; + + cmu_disp: clock-controller@13b90000 { + compatible = "samsung,exynos5433-cmu-disp"; + reg = <0x13b90000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_dsim1_disp", + "sclk_dsim0_disp", + "sclk_dsd_disp", + "sclk_decon_tv_eclk_disp", + "sclk_decon_vclk_disp", + "sclk_decon_eclk_disp", + "sclk_decon_tv_vclk_disp", + "aclk_disp_333"; + clocks = <&xxti>, + <&cmu_mif CLK_SCLK_DSIM1_DISP>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_mif CLK_SCLK_DSD_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, + <&cmu_mif CLK_ACLK_DISP_333>; + }; + + cmu_aud: clock-controller@114c0000 { + compatible = "samsung,exynos5433-cmu-aud"; + reg = <0x114c0000 0x0b04>; + #clock-cells = <1>; + }; + + cmu_bus0: clock-controller@13600000 { + compatible = "samsung,exynos5433-cmu-bus0"; + reg = <0x13600000 0x0b04>; + #clock-cells = <1>; + + clock-names = "aclk_bus0_400"; + clocks = <&cmu_top CLK_ACLK_BUS0_400>; + }; + + cmu_bus1: clock-controller@14800000 { + compatible = "samsung,exynos5433-cmu-bus1"; + reg = <0x14800000 0x0b04>; + #clock-cells = <1>; + + clock-names = "aclk_bus1_400"; + clocks = <&cmu_top CLK_ACLK_BUS1_400>; + }; + + cmu_bus2: clock-controller@13400000 { + compatible = "samsung,exynos5433-cmu-bus2"; + reg = <0x13400000 0x0b04>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_bus2_400"; + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; + }; + + cmu_g3d: clock-controller@14aa0000 { + compatible = "samsung,exynos5433-cmu-g3d"; + reg = <0x14aa0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_g3d_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + }; + + cmu_gscl: clock-controller@13cf0000 { + compatible = "samsung,exynos5433-cmu-gscl"; + reg = <0x13cf0000 0x0b10>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_gscl_111", + "aclk_gscl_333"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; + }; + +Example 3: UART controller node that consumes the clock generated by the clock + controller. + + serial_0: serial@14C10000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14C10000 0x100>; + interrupts = <0 421 0>; + clocks = <&cmu_peric CLK_PCLK_UART0>, + <&cmu_peric CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + status = "disabled"; + }; -- cgit v1.2.2 From df40a13ca53e6f83ead88e718dd96654e75365ec Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 09:13:49 +0900 Subject: clk: samsung: exynos5433: Add clocks for CMU_APOLLO domain This patch adds the mux/divider/gate clocks for CMU_APOLLO domain which generates the clocks for Cortex-A53 Quad-core processsor. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae [s.nawrocki@samsung.com: Renamed pclk_pmu_sysreg_apollo to pclk_sysreg_apollo] Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 9e7ed2d43a15..0a7146861a27 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -32,6 +32,8 @@ Required Properties: which generates clocks for 3D Graphics Engine IP. - "samsung,exynos5433-cmu-gscl" - clock controller compatible for CMU_GSCL which generates clocks for GSCALER IPs. + - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO + which generates clocks for Cortex-A53 Quad-core processor. - reg: physical base address of the controller and length of memory mapped region. @@ -105,6 +107,10 @@ Required Properties: - aclk_gscl_111 - aclk_gscl_333 + Input clocks for apollo clock controller: + - oscclk + - sclk_bus_pll_apollo + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -289,6 +295,15 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_GSCL_333>; }; + cmu_apollo: clock-controller@11900000 { + compatible = "samsung,exynos5433-cmu-apollo"; + reg = <0x11900000 0x1088>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_apollo"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. -- cgit v1.2.2 From 6c5d76d15ab6da9b30af020a44e071eb5145e1a0 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 09:13:50 +0900 Subject: clk: samsung: exynos5433: Add clocks for CMU_ATLAS domain This patch adds the mux/divider/gate clocks for CMU_ATLAS domain which generates the clocks for Cortex-A57 Quad-core processsor, L2 cache controller and CoreSight. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Reviewed-by: Pankaj Dubey Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 0a7146861a27..7c1dccc4d72e 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -34,6 +34,9 @@ Required Properties: which generates clocks for GSCALER IPs. - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO which generates clocks for Cortex-A53 Quad-core processor. + - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS + which generates clocks for Cortex-A57 Quad-core processor, CoreSight and + L2 cache controller. - reg: physical base address of the controller and length of memory mapped region. @@ -111,6 +114,10 @@ Required Properties: - oscclk - sclk_bus_pll_apollo + Input clocks for atlas clock controller: + - oscclk + - sclk_bus_pll_atlas + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -304,6 +311,15 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; }; + cmu_atlas: clock-controller@11800000 { + compatible = "samsung,exynos5433-cmu-atlas"; + reg = <0x11800000 0x1088>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_atlas"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. -- cgit v1.2.2 From b274bbfd8b4a94cb5bd6fe21801264a27dd8ec75 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 09:13:51 +0900 Subject: clk: samsung: exynos5433: Add clocks for CMU_MSCL domain This patch adds the mux/divider/gate clocks for CMU_MSCL domain which generates the clocks for M2M (Memory to Memory) scaler, JPEG IPs. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Reviewed-by: Pankaj Dubey Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 7c1dccc4d72e..ecb9534c2ea6 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -37,6 +37,8 @@ Required Properties: - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor, CoreSight and L2 cache controller. + - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL + which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs. - reg: physical base address of the controller and length of memory mapped region. @@ -118,6 +120,11 @@ Required Properties: - oscclk - sclk_bus_pll_atlas + Input clocks for mscl clock controller: + - oscclk + - sclk_jpeg_mscl + - aclk_mscl_400 + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -320,6 +327,19 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; }; + cmu_mscl: clock-controller@105d0000 { + compatible = "samsung,exynos5433-cmu-mscl"; + reg = <0x105d0000 0x0b10>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_jpeg_mscl", + "aclk_mscl_400"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_top CLK_ACLK_MSCL_400>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. -- cgit v1.2.2 From 9910b6bbaa7b16cd3a8a7d8be53980fa1b8183a6 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 09:13:52 +0900 Subject: clk: samsung: exynos5433: Add clocks for CMU_MFC domain This patch adds the mux/divider/gate clocks for CMU_MFC domain which generates the clocks for MFC(Multi-Format Codec) IP. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index ecb9534c2ea6..0f35167ec15c 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -39,6 +39,8 @@ Required Properties: L2 cache controller. - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs. + - "samsung,exynos5433-cmu-mfc" - clock controller compatible for CMU_MFC + which generates clocks for MFC(Multi-Format Codec) IP. - reg: physical base address of the controller and length of memory mapped region. @@ -125,6 +127,10 @@ Required Properties: - sclk_jpeg_mscl - aclk_mscl_400 + Input clocks for mfc clock controller: + - oscclk + - aclk_mfc_400 + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -340,6 +346,15 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_MSCL_400>; }; + cmu_mfc: clock-controller@15280000 { + compatible = "samsung,exynos5433-cmu-mfc"; + reg = <0x15280000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_mfc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. -- cgit v1.2.2 From 45e58aa5f751fd861d46f7b6d438c1be147458c6 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 09:13:53 +0900 Subject: clk: samsung: exynos5433: Add clocks for CMU_HEVC domain This patch adds the mux/divider/gate clocks for CMU_HEVC domain which generates the clocks for HEVC(High Efficiency Video Codec) decoder IP. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 0f35167ec15c..acc1d8aac95c 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -41,6 +41,8 @@ Required Properties: which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs. - "samsung,exynos5433-cmu-mfc" - clock controller compatible for CMU_MFC which generates clocks for MFC(Multi-Format Codec) IP. + - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC + which generates clocks for HEVC(High Efficiency Video Codec) decoder IP. - reg: physical base address of the controller and length of memory mapped region. @@ -131,6 +133,10 @@ Required Properties: - oscclk - aclk_mfc_400 + Input clocks for hevc clock controller: + - oscclk + - aclk_hevc_400 + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -355,6 +361,15 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; }; + cmu_hevc: clock-controller@14f80000 { + compatible = "samsung,exynos5433-cmu-hevc"; + reg = <0x14f80000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_hevc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. -- cgit v1.2.2 From 8e46c4b84faf317773d5a4ec6d807ceae2d0eb41 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 09:13:54 +0900 Subject: clk: samsung: exynos5433: Add clocks for CMU_ISP domain This patch adds the mux/divider/gate clocks for CMU_ISP domain which generates the clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index acc1d8aac95c..4f3bfcd366a3 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -43,6 +43,8 @@ Required Properties: which generates clocks for MFC(Multi-Format Codec) IP. - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC which generates clocks for HEVC(High Efficiency Video Codec) decoder IP. + - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP + which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. - reg: physical base address of the controller and length of memory mapped region. @@ -137,6 +139,11 @@ Required Properties: - oscclk - aclk_hevc_400 + Input clocks for isp clock controller: + - oscclk + - aclk_isp_dis_400 + - aclk_isp_400 + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -370,6 +377,19 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; }; + cmu_isp: clock-controller@146d0000 { + compatible = "samsung,exynos5433-cmu-isp"; + reg = <0x146d0000 0x0b0c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_isp_dis_400", + "aclk_isp_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_ISP_DIS_400>, + <&cmu_top CLK_ACLK_ISP_400>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. -- cgit v1.2.2 From 6958f22f39f9292f6e871b4383a11f183c1271ed Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 09:13:55 +0900 Subject: clk: samsung: exynos5433: Add clocks for CMU_CAM0 domain This patch adds the mux/divider/gate clocks for CMU_CAM0 domain which generates the clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 4f3bfcd366a3..84002e4b52e5 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -45,6 +45,9 @@ Required Properties: which generates clocks for HEVC(High Efficiency Video Codec) decoder IP. - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. + - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0 + which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} + IPs. - reg: physical base address of the controller and length of memory mapped region. @@ -144,6 +147,12 @@ Required Properties: - aclk_isp_dis_400 - aclk_isp_400 + Input clocks for cam0 clock controller: + - oscclk + - aclk_cam0_333 + - aclk_cam0_400 + - aclk_cam0_552 + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -390,6 +399,21 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_ISP_400>; }; + cmu_cam0: clock-controller@120d0000 { + compatible = "samsung,exynos5433-cmu-cam0"; + reg = <0x120d0000 0x0b0c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_cam0_333", + "aclk_cam0_400", + "aclk_cam0_552"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_CAM0_333>, + <&cmu_top CLK_ACLK_CAM0_400>, + <&cmu_top CLK_ACLK_CAM0_552>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. -- cgit v1.2.2 From a5958a939bbf93e6b77cb3626c6aebde237ad759 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 3 Feb 2015 09:13:56 +0900 Subject: clk: samsung: exynos5433: Add clocks for CMU_CAM1 domain This patch adds the mux/divider/gate clocks for CMU_CAM1 domain which generates the clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos5433-clock.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 84002e4b52e5..63379b04e052 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -48,6 +48,8 @@ Required Properties: - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0 which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. + - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1 + which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. - reg: physical base address of the controller and length of memory mapped region. @@ -153,6 +155,15 @@ Required Properties: - aclk_cam0_400 - aclk_cam0_552 + Input clocks for cam1 clock controller: + - oscclk + - sclk_isp_uart_cam1 + - sclk_isp_spi1_cam1 + - sclk_isp_spi0_cam1 + - aclk_cam1_333 + - aclk_cam1_400 + - aclk_cam1_552 + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -414,6 +425,27 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM0_552>; }; + cmu_cam1: clock-controller@145d0000 { + compatible = "samsung,exynos5433-cmu-cam1"; + reg = <0x145d0000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_isp_uart_cam1", + "sclk_isp_spi1_cam1", + "sclk_isp_spi0_cam1", + "aclk_cam1_333", + "aclk_cam1_400", + "aclk_cam1_552"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, + <&cmu_top CLK_ACLK_CAM1_333>, + <&cmu_top CLK_ACLK_CAM1_400>, + <&cmu_top CLK_ACLK_CAM1_552>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. -- cgit v1.2.2 From 71f32f56cb54303a1b6ce6811373f57d87de40d3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 28 Jan 2015 03:54:07 +0800 Subject: clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 60b44285250d..3f1dcd879af7 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -66,6 +66,8 @@ Required properties: "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 + "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 + "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 Required properties for all clocks: - reg : shall be the control register address for the clock. -- cgit v1.2.2 From 9baf96886780c3ec137350da3c6418c825b2dd0a Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 3 Mar 2015 15:41:05 +0100 Subject: devicetree: bindings: update DT bindings for Marvell EBU clock support With the introduction of the Marvell Armada 39x SoC, the DT bindings for Marvell EBU clocks need to be extended. This commit include the corresponding update to the Device Tree bindings documentation. Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- .../devicetree/bindings/clock/mvebu-core-clock.txt | 9 +++++++++ .../devicetree/bindings/clock/mvebu-gated-clock.txt | 15 ++++++++++++++- 2 files changed, 23 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt index dc5ea5b22da9..670c2af3e931 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -23,6 +23,14 @@ The following is a list of provided IDs and clock names on Armada 380/385: 2 = l2clk (L2 Cache clock) 3 = ddrclk (DDR clock) +The following is a list of provided IDs and clock names on Armada 39x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (Coherent Fabric clock) + 3 = hclk (SDRAM Controller Internal Clock) + 4 = dclk (SDRAM Interface Clock) + 5 = refclk (Reference Clock) + The following is a list of provided IDs and clock names on Kirkwood and Dove: 0 = tclk (Internal Bus clock) 1 = cpuclk (CPU0 clock) @@ -39,6 +47,7 @@ Required properties: "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks "marvell,armada-375-core-clock" - For Armada 375 SoC core clocks "marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks + "marvell,armada-390-core-clock" - For Armada 39x SoC core clocks "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt index 76477be742b2..31c7c0c1ce8f 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt @@ -1,6 +1,6 @@ * Gated Clock bindings for Marvell EBU SoCs -Marvell Armada 370/375/380/385/XP, Dove and Kirkwood allow some +Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some peripheral clocks to be gated to save some power. The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to the @@ -77,6 +77,18 @@ ID Clock Peripheral 28 xor1 XOR 1 30 sata1 SATA 1 +The following is a list of provided IDs for Armada 39x: +ID Clock Peripheral +----------------------------------- +5 pex1 PCIe 1 +6 pex2 PCIe 2 +7 pex3 PCIe 3 +8 pex0 PCIe 0 +9 usb3h0 USB3 Host 0 +17 sdio SDIO +22 xor0 XOR 0 +28 xor1 XOR 1 + The following is a list of provided IDs for Armada XP: ID Clock Peripheral ----------------------------------- @@ -152,6 +164,7 @@ Required properties: "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating "marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating "marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating + "marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating "marvell,dove-gating-clock" - for Dove SoC clock gating "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating -- cgit v1.2.2 From 9f2430973d6713b73b3d25990d0ceb77a12a13a6 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 20 Mar 2015 01:19:03 +0800 Subject: clk: sunxi: Add muxable ahb factors clock for sun5i and sun7i The AHB clock on sun5i and sun7i are muxable divider clocks. Use a factors clock to support them. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 3f1dcd879af7..4fa11af3d378 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -20,6 +20,7 @@ Required properties: "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23 "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates "allwinner,sun4i-a10-ahb-clk" - for the AHB clock + "allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13 "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80 "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10 "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 -- cgit v1.2.2 From a5408ec6057e40d56b1c04608f07d21c5163ced0 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Wed, 18 Mar 2015 16:08:21 +0200 Subject: dt-bindings: Add #defines for MSM8916 clocks and resets Add clocks/resets defines for the global clock controller found on Qualcomm MSM8916 SoCs. Signed-off-by: Georgi Djakov Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/clock/qcom,gcc.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index aba3d254e037..54c23f34f194 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -8,6 +8,7 @@ Required properties : "qcom,gcc-apq8084" "qcom,gcc-ipq8064" "qcom,gcc-msm8660" + "qcom,gcc-msm8916" "qcom,gcc-msm8960" "qcom,gcc-msm8974" "qcom,gcc-msm8974pro" -- cgit v1.2.2 From 045ecad0fdb23f34a2769fa9d49384a3130f7831 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Mon, 2 Mar 2015 14:17:29 +0100 Subject: clk: samsung: exynos3250: Add driver for CMU_ISP clock domain Add clock controller for CMU ISP clock domain on Exynos3250, providing clocks for FIMC-IS subsystem. [b.michalska: use samsung_cmu_register_one to register the provider; updated DT binding documentation] Signed-off-by: Tomasz Figa Signed-off-by: Chanwoo Choi Signed-off-by: Beata Michalska Acked-by: Kyungmin Park [s.nawrocki: added __init attribute which was missing in function exynos3250_cmu_platform_init() in function, which has been] Reported-by: kbuild test robot Signed-off-by: Sylwester Nawrocki Signed-off-by: Michael Turquette --- Documentation/devicetree/bindings/clock/exynos3250-clock.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt index f57d9dd9ea85..f1738b88c225 100644 --- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt @@ -9,6 +9,8 @@ Required Properties: - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC. - "samsung,exynos3250-cmu-dmc" - controller compatible with Exynos3250 SoC for Dynamic Memory Controller domain. + - "samsung,exynos3250-cmu-isp" - ISP block clock controller compatible + with Exynos3250 SOC - reg: physical base address of the controller and length of memory mapped region. @@ -36,6 +38,12 @@ Example 1: Examples of clock controller nodes are listed below. #clock-cells = <1>; }; + cmu_isp: clock-controller@10048000 { + compatible = "samsung,exynos3250-cmu-isp"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + }; + Example 2: UART controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. -- cgit v1.2.2 From 1ccdd04f536510b7bd9b09efe31b7002ebfedf9c Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 4 Mar 2015 19:04:03 +0800 Subject: clk: Add clock driver for mb86s7x The CRG11 clock controller is managed by remote f/w. This driver simply maps Linux CLK ops onto mailbox api. Signed-off-by: Andy Green Signed-off-by: Vincent Yang Signed-off-by: Tetsuya Nuriya Signed-off-by: Michael Turquette --- .../bindings/clock/fujitsu,mb86s70-crg11.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt new file mode 100644 index 000000000000..332396265689 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt @@ -0,0 +1,26 @@ +Fujitsu CRG11 clock driver bindings +----------------------------------- + +Required properties : +- compatible : Shall contain "fujitsu,mb86s70-crg11" +- #clock-cells : Shall be 3 {cntrlr domain port} + +The consumer specifies the desired clock pointing to its phandle. + +Example: + + clock: crg11 { + compatible = "fujitsu,mb86s70-crg11"; + #clock-cells = <3>; + }; + + mhu: mhu0@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu"; + reg = <0 0x2B1F0000 0x1000>; + interrupts = <0 36 4>, /* LP Non-Sec */ + <0 35 4>, /* HP Non-Sec */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */ + clock-names = "clk"; + }; -- cgit v1.2.2 From 9a74ccdbbb8fa6302ae1ba606f2ef0c03d3242ab Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 13 Feb 2015 20:18:52 +0100 Subject: clk: Add PWM clock driver Some board designers, when running out of clock output pads, decide to (mis)use PWM output pads to provide a clock to external components. This driver supports this practice by providing an adapter between the PWM and clock bindings in the device tree. As the PWM bindings specify the period in the device tree, this is a fixed clock. Tested-by: Janusz Uzycki Signed-off-by: Philipp Zabel Signed-off-by: Michael Turquette --- .../devicetree/bindings/clock/pwm-clock.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/pwm-clock.txt (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt new file mode 100644 index 000000000000..83db876b3b90 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pwm-clock.txt @@ -0,0 +1,26 @@ +Binding for an external clock signal driven by a PWM pin. + +This binding uses the common clock binding[1] and the common PWM binding[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/pwm/pwm.txt + +Required properties: +- compatible : shall be "pwm-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- pwms : from common PWM binding; this determines the clock frequency + via the period given in the PWM specifier. + +Optional properties: +- clock-output-names : From common clock binding. +- clock-frequency : Exact output frequency, in case the PWM period + is not exact but was rounded to nanoseconds. + +Example: + clock { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "mipi_mclk"; + pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */ + }; -- cgit v1.2.2