From f12ecbe2ea3c01b61e93af815723939a27511abc Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 15 Oct 2013 12:37:50 +0530 Subject: ARM: dts: omap: Add reset/idle on init bindings for OMAP On OMAP we have co-processor IPs, memory controllers, GPIOs which control regulators and power switches to PMIC, and SoC internal Bus IPs, some or most of which should either not be reset or idled or both at init. (In some cases there are erratas which prevent an IP from being reset) Have a way to pass this information from DT. Update the am33xx/omap4 and omap5 dtsi files with the new bindings for modules which either should not be idled. reset or both. A later patch would cleanup the same information that exists today as part of the hwmod data files. Signed-off-by: Rajendra Nayak Signed-off-by: Benoit Cousson --- Documentation/devicetree/bindings/arm/omap/omap.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 91b7049affa1..808c1543b0f8 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -21,7 +21,8 @@ Required properties: Optional properties: - ti,no_idle_on_suspend: When present, it prevents the PM to idle the module during suspend. - +- ti,no-reset-on-init: When present, the module should not be reset at init +- ti,no-idle-on-init: When present, the module should not be idled at init Example: -- cgit v1.2.2