From 146d35b00db270054378de17ca33eb54b0b78311 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Oct 2011 06:58:44 -0300 Subject: [media] V4L spec: fix typo and missing CAP_RDS documentation For some reason the V4L2_TUNER_CAP_RDS_CONTROLS/BLOCK_IO capabilities were never documented in the proper table. In addition, then RDS interface section incorrectly referred to them as V4L2_TUNER_SUB_RDS_... instead of CAP_RDS_... This is now fixed. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/dev-rds.xml | 8 ++++---- Documentation/DocBook/media/v4l/vidioc-g-tuner.xml | 10 ++++++++++ 2 files changed, 14 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/dev-rds.xml b/Documentation/DocBook/media/v4l/dev-rds.xml index 2427f54397e7..7644b2ec88d7 100644 --- a/Documentation/DocBook/media/v4l/dev-rds.xml +++ b/Documentation/DocBook/media/v4l/dev-rds.xml @@ -29,10 +29,10 @@ returned by the &VIDIOC-QUERYCAP; ioctl. Any tuner that supports RDS will set the V4L2_TUNER_CAP_RDS flag in the capability field of &v4l2-tuner;. If the driver only passes RDS blocks without interpreting the data -the V4L2_TUNER_SUB_RDS_BLOCK_IO flag has to be +the V4L2_TUNER_CAP_RDS_BLOCK_IO flag has to be set, see Reading RDS data. For future use the -flag V4L2_TUNER_SUB_RDS_CONTROLS has also been +flag V4L2_TUNER_CAP_RDS_CONTROLS has also been defined. However, a driver for a radio tuner with this capability does not yet exist, so if you are planning to write such a driver you should discuss this on the linux-media mailing list: &v4l-ml;. @@ -52,9 +52,9 @@ field of &v4l2-modulator;. In order to enable the RDS transmission one must set the V4L2_TUNER_SUB_RDS bit in the txsubchans field of &v4l2-modulator;. If the driver only passes RDS blocks without interpreting the data -the V4L2_TUNER_SUB_RDS_BLOCK_IO flag has to be set. If the +the V4L2_TUNER_CAP_RDS_BLOCK_IO flag has to be set. If the tuner is capable of handling RDS entities like program identification codes and radio -text, the flag V4L2_TUNER_SUB_RDS_CONTROLS should be set, +text, the flag V4L2_TUNER_CAP_RDS_CONTROLS should be set, see Writing RDS data and FM Transmitter Control Reference. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index bd98c734c06b..b23a4b097b34 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -318,6 +318,16 @@ standard. RDS capture is supported. This capability is only valid for radio tuners. + + V4L2_TUNER_CAP_RDS_BLOCK_IO + 0x0100 + The RDS data is passed as unparsed RDS blocks. + + + V4L2_TUNER_CAP_RDS_CONTROLS + 0x0200 + The RDS data is parsed by the hardware and set via controls. + -- cgit v1.2.2 From 0fb6ec6b1c185a1d99bf238880cc265d72ab111b Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 7 Nov 2011 08:30:20 -0300 Subject: [media] V4L2 Spec: clarify usage of V4L2_FBUF_FLAG_PRIMARY As per discussion during the 2011 V4L-DVB workshop. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml index 055718231bc1..109d7294d355 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml @@ -295,7 +295,8 @@ set this field to zero. The device is capable of non-destructive overlays. When the driver clears this flag, only destructive overlays are supported. There are no drivers yet which support both destructive and -non-destructive overlays. +non-destructive overlays. Video Output Overlays are in practice always +non-destructive. V4L2_FBUF_CAP_CHROMAKEY @@ -356,7 +357,9 @@ with the chroma-key colors are replaced by video pixels, which is exactly opposi V4L2_FBUF_FLAG_PRIMARY 0x0001 The framebuffer is the primary graphics surface. -In other words, the overlay is destructive. [?] +In other words, the overlay is destructive. This flag is typically set by any +driver that doesn't have the V4L2_FBUF_CAP_EXTERNOVERLAY +capability and it is cleared otherwise. V4L2_FBUF_FLAG_OVERLAY @@ -366,9 +369,8 @@ size as the capture. [?] The purpose of -V4L2_FBUF_FLAG_PRIMARY and V4L2_FBUF_FLAG_OVERLAY was never quite clear. -Most drivers seem to ignore these flags. For compatibility with the +Most drivers seem to ignore this flag. For compatibility with the bttv driver applications should set the V4L2_FBUF_FLAG_OVERLAY flag. -- cgit v1.2.2 From b698c784bfacc909b05e043d8fca08281fe154bb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 9 Nov 2011 10:53:01 -0300 Subject: [media] V4L2 spec: fix the description of V4L2_FBUF_CAP_SRC_CHROMAKEY V4L2_FBUF_CAP_SRC_CHROMAKEY is the opposite of V4L2_FBUF_CAP_CHROMAKEY, but according to the documentation it was the same. The terms 'video' and 'framebuffer' were accidentally swapped in the text. Signed-off-by: Hans Verkuil CC: Vaibhav Hiremath Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml index 109d7294d355..93817f337033 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml @@ -340,8 +340,8 @@ blending makes no sense for destructive overlays. V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080 - The device supports Source Chroma-keying. Framebuffer pixels -with the chroma-key colors are replaced by video pixels, which is exactly opposite of + The device supports Source Chroma-keying. Video pixels +with the chroma-key colors are replaced by framebuffer pixels, which is exactly opposite of V4L2_FBUF_CAP_CHROMAKEY -- cgit v1.2.2 From c6401af6692bac94b7ae1ff04f1d32c5dd1a38e3 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 3 Dec 2011 08:37:06 -0300 Subject: [media] Remove unneeded comments from the media API DocBook files This removes comment tags intended for emacs configuration from 67 files in the Media API DocBook. Such comments are not really helpful and violate the coding style rules. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/biblio.xml | 8 -------- Documentation/DocBook/media/v4l/common.xml | 8 -------- Documentation/DocBook/media/v4l/compat.xml | 10 +--------- Documentation/DocBook/media/v4l/controls.xml | 8 -------- Documentation/DocBook/media/v4l/dev-capture.xml | 8 -------- Documentation/DocBook/media/v4l/dev-codec.xml | 8 -------- Documentation/DocBook/media/v4l/dev-effect.xml | 8 -------- Documentation/DocBook/media/v4l/dev-event.xml | 8 -------- Documentation/DocBook/media/v4l/dev-osd.xml | 8 -------- Documentation/DocBook/media/v4l/dev-output.xml | 8 -------- Documentation/DocBook/media/v4l/dev-overlay.xml | 8 -------- Documentation/DocBook/media/v4l/dev-radio.xml | 8 -------- Documentation/DocBook/media/v4l/dev-raw-vbi.xml | 8 -------- Documentation/DocBook/media/v4l/dev-rds.xml | 8 -------- Documentation/DocBook/media/v4l/dev-sliced-vbi.xml | 9 --------- Documentation/DocBook/media/v4l/dev-teletext.xml | 8 -------- Documentation/DocBook/media/v4l/driver.xml | 8 -------- Documentation/DocBook/media/v4l/func-close.xml | 8 -------- Documentation/DocBook/media/v4l/func-ioctl.xml | 8 -------- Documentation/DocBook/media/v4l/func-mmap.xml | 8 -------- Documentation/DocBook/media/v4l/func-munmap.xml | 8 -------- Documentation/DocBook/media/v4l/func-open.xml | 8 -------- Documentation/DocBook/media/v4l/func-poll.xml | 8 -------- Documentation/DocBook/media/v4l/func-read.xml | 8 -------- Documentation/DocBook/media/v4l/func-select.xml | 8 -------- Documentation/DocBook/media/v4l/func-write.xml | 8 -------- Documentation/DocBook/media/v4l/io.xml | 8 -------- Documentation/DocBook/media/v4l/libv4l.xml | 7 ------- Documentation/DocBook/media/v4l/pixfmt-grey.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-m420.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-nv12.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-nv12m.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-nv16.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-uyvy.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-vyuy.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-y16.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-y41p.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-yuv410.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-yuv420.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-yuyv.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt-yvyu.xml | 8 -------- Documentation/DocBook/media/v4l/pixfmt.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-enuminput.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-enumoutput.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-enumstd.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml | 7 ------- Documentation/DocBook/media/v4l/vidioc-g-frequency.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-g-modulator.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-g-priority.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-g-std.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-g-tuner.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-querybuf.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-queryctrl.xml | 8 -------- Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml | 8 -------- 67 files changed, 1 insertion(+), 536 deletions(-) (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index afc8a0dd2601..cea6fd3ed428 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -178,11 +178,3 @@ in the frequency range from 87,5 to 108,0 MHz - - diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index a86f7a045529..9d3919831eba 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -1195,11 +1195,3 @@ separate parameters for input and output devices. These ioctls are optional, drivers need not implement them. If so, they return the &EINVAL;. - - diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index b68698f96e7f..8b44a43f4542 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -1082,7 +1082,7 @@ until the time in the timestamp field has arrived. I would like to follow SGI's lead, and adopt a multimedia timestamping system like their UST (Unadjusted System Time). See http://web.archive.org/web/*/http://reality.sgi.com -/cpirazzi_engr/lg/time/intro.html. +/cpirazzi_engr/lg/time/intro.html. UST uses timestamps that are 64-bit signed integers (not struct timeval's) and given in nanosecond units. The UST clock starts at zero when the system is booted and runs continuously and @@ -2507,11 +2507,3 @@ interfaces and should not be implemented in new drivers. - - diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 3bc5ee8b2c74..9e72f077329a 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3357,11 +3357,3 @@ interface and may change in the future. - - diff --git a/Documentation/DocBook/media/v4l/dev-capture.xml b/Documentation/DocBook/media/v4l/dev-capture.xml index 2237c661f26a..e1c5f9406d6a 100644 --- a/Documentation/DocBook/media/v4l/dev-capture.xml +++ b/Documentation/DocBook/media/v4l/dev-capture.xml @@ -108,11 +108,3 @@ linkend="mmap">memory mapping or user pointer) I/O. See for details. - - diff --git a/Documentation/DocBook/media/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml index 6e156dc45b94..dca0ecd54dc6 100644 --- a/Documentation/DocBook/media/v4l/dev-codec.xml +++ b/Documentation/DocBook/media/v4l/dev-codec.xml @@ -16,11 +16,3 @@ Applications send data to be converted to the driver through a I/O. [to do] - - diff --git a/Documentation/DocBook/media/v4l/dev-effect.xml b/Documentation/DocBook/media/v4l/dev-effect.xml index 9c243beba0e6..2350a67c0710 100644 --- a/Documentation/DocBook/media/v4l/dev-effect.xml +++ b/Documentation/DocBook/media/v4l/dev-effect.xml @@ -15,11 +15,3 @@ receive the result data either with &func-read; and &func-write; functions, or through the streaming I/O mechanism. [to do] - - diff --git a/Documentation/DocBook/media/v4l/dev-event.xml b/Documentation/DocBook/media/v4l/dev-event.xml index f14ae3fe107c..19f4becfae34 100644 --- a/Documentation/DocBook/media/v4l/dev-event.xml +++ b/Documentation/DocBook/media/v4l/dev-event.xml @@ -41,11 +41,3 @@ intermediate step leading up to that information. See the documentation for the event you want to subscribe to whether this is applicable for that event or not. - - diff --git a/Documentation/DocBook/media/v4l/dev-osd.xml b/Documentation/DocBook/media/v4l/dev-osd.xml index c9a68a2ccd33..479d9433869a 100644 --- a/Documentation/DocBook/media/v4l/dev-osd.xml +++ b/Documentation/DocBook/media/v4l/dev-osd.xml @@ -154,11 +154,3 @@ data flow. For more information see . however the framebuffer interface of the driver may support the FBIOBLANK ioctl. - - diff --git a/Documentation/DocBook/media/v4l/dev-output.xml b/Documentation/DocBook/media/v4l/dev-output.xml index 919e22c53854..9130a3dc7880 100644 --- a/Documentation/DocBook/media/v4l/dev-output.xml +++ b/Documentation/DocBook/media/v4l/dev-output.xml @@ -104,11 +104,3 @@ linkend="mmap">memory mapping or user pointer) I/O. See for details. - - diff --git a/Documentation/DocBook/media/v4l/dev-overlay.xml b/Documentation/DocBook/media/v4l/dev-overlay.xml index 92513cf79150..40d1d7681439 100644 --- a/Documentation/DocBook/media/v4l/dev-overlay.xml +++ b/Documentation/DocBook/media/v4l/dev-overlay.xml @@ -369,11 +369,3 @@ reasons. diff --git a/Documentation/DocBook/media/v4l/dev-radio.xml b/Documentation/DocBook/media/v4l/dev-radio.xml index 73aa90b45b34..3e6ac73b36af 100644 --- a/Documentation/DocBook/media/v4l/dev-radio.xml +++ b/Documentation/DocBook/media/v4l/dev-radio.xml @@ -47,11 +47,3 @@ depending on the selected frequency. The &VIDIOC-G-TUNER; or &VIDIOC-G-MODULATOR; ioctl reports the supported frequency range. - - diff --git a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml index c5a70bdfaf27..b788c72c885e 100644 --- a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml +++ b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml @@ -337,11 +337,3 @@ an &EBUSY; if the required hardware resources are temporarily unavailable, for example the device is already in use by another process. - - diff --git a/Documentation/DocBook/media/v4l/dev-rds.xml b/Documentation/DocBook/media/v4l/dev-rds.xml index 7644b2ec88d7..38883a419e65 100644 --- a/Documentation/DocBook/media/v4l/dev-rds.xml +++ b/Documentation/DocBook/media/v4l/dev-rds.xml @@ -194,11 +194,3 @@ as follows: - - diff --git a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml index 69e789fa7f7b..548f8ea28dee 100644 --- a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml +++ b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml @@ -697,12 +697,3 @@ Sliced VBI services for a description of the line payload. - - - diff --git a/Documentation/DocBook/media/v4l/dev-teletext.xml b/Documentation/DocBook/media/v4l/dev-teletext.xml index 414b1cfff9f4..bd21c64d70f3 100644 --- a/Documentation/DocBook/media/v4l/dev-teletext.xml +++ b/Documentation/DocBook/media/v4l/dev-teletext.xml @@ -27,11 +27,3 @@ kernel 2.6.37. Modern devices all use the raw or sliced VBI API. - - diff --git a/Documentation/DocBook/media/v4l/driver.xml b/Documentation/DocBook/media/v4l/driver.xml index 1f7eea5c4ec3..eacafe312cd2 100644 --- a/Documentation/DocBook/media/v4l/driver.xml +++ b/Documentation/DocBook/media/v4l/driver.xml @@ -198,11 +198,3 @@ devices with the videodev module. to do --> - - diff --git a/Documentation/DocBook/media/v4l/func-close.xml b/Documentation/DocBook/media/v4l/func-close.xml index dfb41cbbbec3..232920d2f3c6 100644 --- a/Documentation/DocBook/media/v4l/func-close.xml +++ b/Documentation/DocBook/media/v4l/func-close.xml @@ -60,11 +60,3 @@ descriptor. - - diff --git a/Documentation/DocBook/media/v4l/func-ioctl.xml b/Documentation/DocBook/media/v4l/func-ioctl.xml index 2de64be706f5..4394184a1a6d 100644 --- a/Documentation/DocBook/media/v4l/func-ioctl.xml +++ b/Documentation/DocBook/media/v4l/func-ioctl.xml @@ -69,11 +69,3 @@ their respective function and parameters are specified in - - diff --git a/Documentation/DocBook/media/v4l/func-mmap.xml b/Documentation/DocBook/media/v4l/func-mmap.xml index 786732b64bbd..f31ad71bf301 100644 --- a/Documentation/DocBook/media/v4l/func-mmap.xml +++ b/Documentation/DocBook/media/v4l/func-mmap.xml @@ -181,11 +181,3 @@ complete the request. - - diff --git a/Documentation/DocBook/media/v4l/func-munmap.xml b/Documentation/DocBook/media/v4l/func-munmap.xml index e2c4190f9bb6..860d49ca54a5 100644 --- a/Documentation/DocBook/media/v4l/func-munmap.xml +++ b/Documentation/DocBook/media/v4l/func-munmap.xml @@ -74,11 +74,3 @@ mapped yet. - - diff --git a/Documentation/DocBook/media/v4l/func-open.xml b/Documentation/DocBook/media/v4l/func-open.xml index 7595d07a8c72..cf64e207c3ee 100644 --- a/Documentation/DocBook/media/v4l/func-open.xml +++ b/Documentation/DocBook/media/v4l/func-open.xml @@ -111,11 +111,3 @@ system has been reached. - - diff --git a/Documentation/DocBook/media/v4l/func-poll.xml b/Documentation/DocBook/media/v4l/func-poll.xml index ec3c718f5963..85cad8bff5ba 100644 --- a/Documentation/DocBook/media/v4l/func-poll.xml +++ b/Documentation/DocBook/media/v4l/func-poll.xml @@ -117,11 +117,3 @@ than OPEN_MAX. - - diff --git a/Documentation/DocBook/media/v4l/func-read.xml b/Documentation/DocBook/media/v4l/func-read.xml index a5089bf8873d..e218bbfbd362 100644 --- a/Documentation/DocBook/media/v4l/func-read.xml +++ b/Documentation/DocBook/media/v4l/func-read.xml @@ -179,11 +179,3 @@ type of device. - - diff --git a/Documentation/DocBook/media/v4l/func-select.xml b/Documentation/DocBook/media/v4l/func-select.xml index b6713623181f..e12a60d9bd85 100644 --- a/Documentation/DocBook/media/v4l/func-select.xml +++ b/Documentation/DocBook/media/v4l/func-select.xml @@ -128,11 +128,3 @@ zero or greater than FD_SETSIZE. - - diff --git a/Documentation/DocBook/media/v4l/func-write.xml b/Documentation/DocBook/media/v4l/func-write.xml index 2c09c09371c3..575207885726 100644 --- a/Documentation/DocBook/media/v4l/func-write.xml +++ b/Documentation/DocBook/media/v4l/func-write.xml @@ -126,11 +126,3 @@ type of device. - - diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index 3f47df1aa54a..b815929b5bba 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -1282,11 +1282,3 @@ line, top field first. The bottom field is transmitted first. - - diff --git a/Documentation/DocBook/media/v4l/libv4l.xml b/Documentation/DocBook/media/v4l/libv4l.xml index 3cb10ec51929..d3b71e20003c 100644 --- a/Documentation/DocBook/media/v4l/libv4l.xml +++ b/Documentation/DocBook/media/v4l/libv4l.xml @@ -158,10 +158,3 @@ still don't use libv4l. - diff --git a/Documentation/DocBook/media/v4l/pixfmt-grey.xml b/Documentation/DocBook/media/v4l/pixfmt-grey.xml index 3b72bc6b2de7..bee970d3f76d 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-grey.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-grey.xml @@ -60,11 +60,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-m420.xml b/Documentation/DocBook/media/v4l/pixfmt-m420.xml index ce4bc019e5c0..aadae92c5d04 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-m420.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-m420.xml @@ -137,11 +137,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml index 873f67035181..84dd4fd7cb80 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml @@ -141,11 +141,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml index c9e166d9ded8..3fd3ce5df270 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml @@ -144,11 +144,3 @@ CbCr plane has as many pad bytes after its rows. - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml index 7a2855a526c1..2f82b1da8dfe 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml @@ -64,11 +64,3 @@ layout of macroblocks - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv16.xml b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml index 26094035fc04..8ae1f8a810d0 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv16.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml @@ -164,11 +164,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml index 4db272b8a0d3..ba56536622f2 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml @@ -930,11 +930,3 @@ See &v4l-dvb; for access instructions. - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml index 3cab5d0ca75d..33fa5a47a865 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml @@ -234,11 +234,3 @@ linkend="osd">Video Output Overlay. - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml index 519a9efbac10..6494b05d84a1 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml @@ -81,11 +81,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml index 5fe84ecc2ebe..5eaf2b42d3f7 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml @@ -65,11 +65,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml index d67a472b0880..fee65dca79c5 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml @@ -65,11 +65,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml index 0cdf13b8ac1c..19727ab4c757 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml @@ -65,11 +65,3 @@ columns and rows. - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml index 816c8d467c16..b1f6801a17ff 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml @@ -118,11 +118,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml index 61f12a5e68d9..82803408b389 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml @@ -118,11 +118,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-y16.xml b/Documentation/DocBook/media/v4l/pixfmt-y16.xml index d58404015078..ff4f727d5624 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-y16.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-y16.xml @@ -79,11 +79,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-y41p.xml b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml index 73c8536efb05..98dcb91d2917 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-y41p.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml @@ -147,11 +147,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml index 8eb4a193d770..0869dce5f92c 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml @@ -131,11 +131,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml index 00e0960a9869..086dc731bf02 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml @@ -145,11 +145,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml index 42d7de5e456d..48649fac1596 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml @@ -147,11 +147,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml index f5d8f57495c8..9957863daf18 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml @@ -152,11 +152,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml index 4348bd9f0d01..4ce6463fe0a5 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml @@ -151,11 +151,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml index bdb2ffacbbcc..58384092251a 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml @@ -118,11 +118,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml index 40d17ae39dde..bfffdc76d3da 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml @@ -118,11 +118,3 @@ pixel image - - diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index 2ff6b7776d7f..a33a4b22173b 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -997,11 +997,3 @@ the other bits are set to 0. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml index 1d31427edd1b..0be17c232d3a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml @@ -228,11 +228,3 @@ is out of bounds. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml index 71d373b6d36a..347d142e7431 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml @@ -156,11 +156,3 @@ bounds. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml index 476fe1d2bba0..9b8efcd6e947 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml @@ -311,11 +311,3 @@ out of bounds. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml index a281d26a195f..a64d5ef103fa 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml @@ -196,11 +196,3 @@ is out of bounds. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml index 95803fe2c8e4..3a5fc5405f96 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml @@ -381,11 +381,3 @@ is out of bounds. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml index 5146d00782e3..12b1d0503e26 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml @@ -127,11 +127,3 @@ this control belongs to. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index 5122ce87e0b8..6f1f9a629dc3 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -312,10 +312,3 @@ to store the payload and this error code is returned. - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml index 062d72069090..16431813bebd 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml @@ -135,11 +135,3 @@ wrong. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml index 15ce660f0f5a..7f4ac7e41fa8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml @@ -236,11 +236,3 @@ mode. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-priority.xml b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml index 8f5e3da7002f..6a81b4fe9538 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-priority.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml @@ -133,11 +133,3 @@ priority. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-std.xml b/Documentation/DocBook/media/v4l/vidioc-g-std.xml index 37996f25b5d4..99ff1a016220 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-std.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-std.xml @@ -88,11 +88,3 @@ standards. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index b23a4b097b34..91ec2fb658f8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -535,11 +535,3 @@ out of bounds. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml index 5c104d42d31c..6e414d7b6df7 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml @@ -100,11 +100,3 @@ supported, or the index is out of bounds. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml index 0ac0057a51c4..36660d311b51 100644 --- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml @@ -443,11 +443,3 @@ or this particular menu item is not supported by the driver. - - diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index c30dcc4232c0..e013da845b11 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -125,11 +125,3 @@ wrong. - - -- cgit v1.2.2 From a597fa78d374c57dcf9a9bac02472a530cd7e60a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 10 Jun 2011 12:23:30 -0300 Subject: [media] v4l: Add over-current and indicator flash fault bits Flash controllers can report over-current and indicator fault conditions. Define flash fault control bits for them. Signed-off-by: Laurent Pinchart Acked-by: Andy Shevchenko Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/controls.xml | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 9e72f077329a..c0422c622337 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3329,6 +3329,16 @@ interface and may change in the future. The short circuit protection of the flash controller has been triggered. + + V4L2_FLASH_FAULT_OVER_CURRENT + Current in the LED power supply has exceeded the limit + specific to the flash controller. + + + V4L2_FLASH_FAULT_INDICATOR + The flash controller has detected a short or open + circuit condition on the indicator LED. + -- cgit v1.2.2 From cc1d327232759647ea56725eab1c6b16c92d52fa Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 14 Nov 2011 08:48:18 -0300 Subject: [media] v4l: Add new alpha component control The V4L2_CID_ALPHA_COMPONENT control is intended for the video capture or memory-to-memory devices that are capable of setting up the per-pixel alpha component to some arbitrary value. It allows to set the alpha component for all pixels to an arbitrary value. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 11 ++++++++++ Documentation/DocBook/media/v4l/controls.xml | 25 ++++++++++++++++------ .../DocBook/media/v4l/pixfmt-packed-rgb.xml | 7 ++++-- 3 files changed, 35 insertions(+), 8 deletions(-) (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 8b44a43f4542..12ba26262d32 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2379,6 +2379,17 @@ that used it. It was originally scheduled for removal in 2.6.35. +
+ V4L2 in Linux 3.3 + + + Added V4L2_CID_ALPHA_COMPONENT control + to the User controls class. + + + +
+
Relation of V4L2 to other Linux multimedia APIs diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index c0422c622337..a1be37897ad7 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -323,12 +323,6 @@ minimum value disables backlight compensation. Switch on or off the illuminator 1 or 2 of the device (usually a microscope). - - V4L2_CID_LASTP1 - - End of the predefined control IDs (currently -V4L2_CID_ILLUMINATORS_2 + 1). - V4L2_CID_MIN_BUFFERS_FOR_CAPTURE integer @@ -345,6 +339,25 @@ and used as a hint to determine the number of OUTPUT buffers to pass to REQBUFS. The value is the minimum number of OUTPUT buffers that is necessary for hardware to work. + + V4L2_CID_ALPHA_COMPONENT + integer + Sets the alpha color component on the capture device or on + the capture buffer queue of a mem-to-mem device. When a mem-to-mem + device produces frame format that includes an alpha component + (e.g. packed RGB image formats) + and the alpha value is not defined by the mem-to-mem input data + this control lets you select the alpha component value of all + pixels. It is applicable to any pixel format that contains an alpha + component. + + + + V4L2_CID_LASTP1 + + End of the predefined control IDs (currently + V4L2_CID_ALPHA_COMPONENT + 1). + V4L2_CID_PRIVATE_BASE diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml index ba56536622f2..166c8d65e4f7 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml @@ -428,8 +428,11 @@ colorspace V4L2_COLORSPACE_SRGB. Bit 7 is the most significant bit. The value of a = alpha bits is undefined when reading from the driver, ignored when writing to the driver, except when alpha blending has been negotiated for a -Video Overlay or Video Output Overlay. +Video Overlay or +Video Output Overlay or when alpha component has been configured +for a Video Capture by means of V4L2_CID_ALPHA_COMPONENT + control. <constant>V4L2_PIX_FMT_BGR24</constant> 4 × 4 pixel -- cgit v1.2.2 From fe3449a4aa4e62404cc1c57c945fd56152b2f877 Mon Sep 17 00:00:00 2001 From: Theodore Kilgore <kilgota@banach.math.auburn.edu> Date: Tue, 13 Dec 2011 18:09:15 -0300 Subject: [media] gspca: Add jl2005bcd sub driver Written by Theodore Kilgore With minor changes by Hans de Goede: -Code style fixes -Correct the verbose level on various PDEBUG messages -Make error messages use pr_err instead of PDEBUG -Document the jl20 pixel format Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> --- Documentation/DocBook/media/v4l/pixfmt.xml | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index a33a4b22173b..9ddc57cb2ef9 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -890,6 +890,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm <entry>'M310'</entry> <entry>Compressed BGGR Bayer format used by the gspca driver.</entry> </row> + <row id="V4L2-PIX-FMT-JL2005BCD"> + <entry><constant>V4L2_PIX_FMT_JL2005BCD</constant></entry> + <entry>'JL20'</entry> + <entry>JPEG compressed RGGB Bayer format used by the gspca driver.</entry> + </row> <row id="V4L2-PIX-FMT-OV511"> <entry><constant>V4L2_PIX_FMT_OV511</constant></entry> <entry>'O511'</entry> -- cgit v1.2.2 From 8af4922fe5d1574acfdedf8a9eaafccf1b955c1d Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski <t.stanislaws@samsung.com> Date: Fri, 19 Aug 2011 07:00:04 -0300 Subject: [media] doc: v4l: add documentation for selection API This patch adds a documentation for VIDIOC_{G/S}_SELECTION ioctl. Moreover, the patch adds the description of modeling of composing, cropping and scaling features in V4L2. Finally, some examples are presented. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> --- Documentation/DocBook/media/v4l/common.xml | 2 + Documentation/DocBook/media/v4l/compat.xml | 9 + Documentation/DocBook/media/v4l/selection-api.xml | 327 +++++++++++++++++++++ Documentation/DocBook/media/v4l/v4l2.xml | 1 + .../DocBook/media/v4l/vidioc-g-selection.xml | 304 +++++++++++++++++++ 5 files changed, 643 insertions(+) create mode 100644 Documentation/DocBook/media/v4l/selection-api.xml create mode 100644 Documentation/DocBook/media/v4l/vidioc-g-selection.xml (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index 9d3919831eba..c79278acfb0e 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -1168,6 +1168,8 @@ dheight = format.fmt.pix.height; </section> </section> + &sub-selection-api; + <section id="streaming-par"> <title>Streaming Parameters diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 12ba26262d32..c736380b4647 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2376,6 +2376,12 @@ that used it. It was originally scheduled for removal in 2.6.35. V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to userspace. + + Add selection API for extended control over cropping and +composing. Does not affect the compatibility of current drivers and +applications. See selection API for +details. +
@@ -2500,6 +2506,9 @@ ioctls. &VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls. + + Selection API. + diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml new file mode 100644 index 000000000000..46cb47ab8e3b --- /dev/null +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -0,0 +1,327 @@ +
+ + Experimental API for cropping, composing and scaling + + + Experimental + + This is an experimental +interface and may change in the future. + + +
+ Introduction + +Some video capture devices can sample a subsection of a picture and +shrink or enlarge it to an image of arbitrary size. Next, the devices can +insert the image into larger one. Some video output devices can crop part of an +input image, scale it up or down and insert it at an arbitrary scan line and +horizontal offset into a video signal. We call these abilities cropping, +scaling and composing. + +On a video capture device the source is a video +signal, and the cropping target determine the area actually sampled. The sink +is an image stored in a memory buffer. The composing area specifies which part +of the buffer is actually written to by the hardware. + +On a video output device the source is an image in a +memory buffer, and the cropping target is a part of an image to be shown on a +display. The sink is the display or the graphics screen. The application may +select the part of display where the image should be displayed. The size and +position of such a window is controlled by the compose target. + +Rectangles for all cropping and composing targets are defined even if the +device does supports neither cropping nor composing. Their size and position +will be fixed in such a case. If the device does not support scaling then the +cropping and composing rectangles have the same size. + +
+ +
+ Selection targets + +
+ Cropping and composing targets + + + + + + Targets used by a cropping, composing and scaling + process + + +
+
+ +
+ + Configuration + +Applications can use the selection +API to select an area in a video signal or a buffer, and to query for +default settings and hardware limits. + +Video hardware can have various cropping, composing and scaling +limitations. It may only scale up or down, support only discrete scaling +factors, or have different scaling abilities in the horizontal and vertical +directions. Also it may not support scaling at all. At the same time the +cropping/composing rectangles may have to be aligned, and both the source and +the sink may have arbitrary upper and lower size limits. Therefore, as usual, +drivers are expected to adjust the requested parameters and return the actual +values selected. An application can control the rounding behaviour using constraint flags . + +
+ + Configuration of video capture + +See figure for examples of the +selection targets available for a video capture device. It is recommended to +configure the cropping targets before to the composing targets. + +The range of coordinates of the top left corner, width and height of +areas that can be sampled is given by the V4L2_SEL_TGT_CROP_BOUNDS + target. It is recommended for the driver developers to put the +top/left corner at position (0,0) . The rectangle's +coordinates are expressed in driver dependant units, although the coordinate +system guarantees that if sizes of the active cropping and the active composing +rectangles are equal then no scaling is performed. + +The top left corner, width and height of the source rectangle, that is +the area actually sampled, is given by the V4L2_SEL_TGT_CROP_ACTIVE + target. It uses the same coordinate system as +V4L2_SEL_TGT_CROP_BOUNDS . The active cropping area must lie +completely inside the capture boundaries. The driver may further adjust the +requested size and/or position according to hardware limitations. + +Each capture device has a default source rectangle, given by the + V4L2_SEL_TGT_CROP_DEFAULT target. This rectangle shall +over what the driver writer considers the complete picture. Drivers shall set +the active crop rectangle to the default when the driver is first loaded, but +not later. + +The composing targets refer to a memory buffer. The limits of composing +coordinates are obtained using V4L2_SEL_TGT_COMPOSE_BOUNDS +. All coordinates are expressed in natural unit for given formats. +Pixels are highly recommended. The rectangle's top/left corner must be located +at position (0,0) . The width and height are equal to the +image size set by VIDIOC_S_FMT . + +The part of a buffer into which the image is inserted by the hardware is +controlled by the V4L2_SEL_TGT_COMPOSE_ACTIVE target. +The rectangle's coordinates are also expressed in the same coordinate system as +the bounds rectangle. The composing rectangle must lie completely inside bounds +rectangle. The driver must adjust the composing rectangle to fit to the +bounding limits. Moreover, the driver can perform other adjustments according +to hardware limitations. The application can control rounding behaviour using + constraint flags . + +For capture devices the default composing rectangle is queried using + V4L2_SEL_TGT_COMPOSE_DEFAULT . It is usually equal to the +bounding rectangle. + +The part of a buffer that is modified by the hardware is given by + V4L2_SEL_TGT_COMPOSE_PADDED . It contains all pixels +defined using V4L2_SEL_TGT_COMPOSE_ACTIVE plus all +padding data modified by hardware during insertion process. All pixels outside +this rectangle must not be changed by the hardware. The +content of pixels that lie inside the padded area but outside active area is +undefined. The application can use the padded and active rectangles to detect +where the rubbish pixels are located and remove them if needed. + +
+ +
+ + Configuration of video output + +For output devices targets and ioctls are used similarly to the video +capture case. The composing rectangle refers to the +insertion of an image into a video signal. The cropping rectangles refer to a +memory buffer. It is recommended to configure the composing targets before to +the cropping targets. + +The cropping targets refer to the memory buffer that contains an image to +be inserted into a video signal or graphical screen. The limits of cropping +coordinates are obtained using V4L2_SEL_TGT_CROP_BOUNDS . +All coordinates are expressed in natural units for a given format. Pixels are +highly recommended. The top/left corner is always point (0,0) +. The width and height is equal to the image size specified using + VIDIOC_S_FMT ioctl. + +The top left corner, width and height of the source rectangle, that is +the area from which image date are processed by the hardware, is given by the + V4L2_SEL_TGT_CROP_ACTIVE . Its coordinates are expressed +in in the same coordinate system as the bounds rectangle. The active cropping +area must lie completely inside the crop boundaries and the driver may further +adjust the requested size and/or position according to hardware +limitations. + +For output devices the default cropping rectangle is queried using + V4L2_SEL_TGT_CROP_DEFAULT . It is usually equal to the +bounding rectangle. + +The part of a video signal or graphics display where the image is +inserted by the hardware is controlled by V4L2_SEL_TGT_COMPOSE_ACTIVE + target. The rectangle's coordinates are expressed in driver +dependant units. The only exception are digital outputs where the units are +pixels. For other types of devices, the coordinate system guarantees that if +sizes of the active cropping and the active composing rectangles are equal then +no scaling is performed. The composing rectangle must lie completely inside +the bounds rectangle. The driver must adjust the area to fit to the bounding +limits. Moreover, the driver can perform other adjustments according to +hardware limitations. + +The device has a default composing rectangle, given by the +V4L2_SEL_TGT_COMPOSE_DEFAULT target. This rectangle shall cover what +the driver writer considers the complete picture. It is recommended for the +driver developers to put the top/left corner at position (0,0) +. Drivers shall set the active composing rectangle to the default +one when the driver is first loaded. + +The devices may introduce additional content to video signal other than +an image from memory buffers. It includes borders around an image. However, +such a padded area is driver-dependent feature not covered by this document. +Driver developers are encouraged to keep padded rectangle equal to active one. +The padded target is accessed by the V4L2_SEL_TGT_COMPOSE_PADDED + identifier. It must contain all pixels from the +V4L2_SEL_TGT_COMPOSE_ACTIVE target. + +
+ +
+ + Scaling control. + +An application can detect if scaling is performed by comparing the width +and the height of rectangles obtained using V4L2_SEL_TGT_CROP_ACTIVE + and V4L2_SEL_TGT_COMPOSE_ACTIVE targets. If +these are not equal then the scaling is applied. The application can compute +the scaling ratios using these values. + +
+ +
+ +
+ + Comparison with old cropping API. + +The selection API was introduced to cope with deficiencies of previous + API , that was designed to control simple capture +devices. Later the cropping API was adopted by video output drivers. The ioctls +are used to select a part of the display were the video signal is inserted. It +should be considered as an API abuse because the described operation is +actually the composing. The selection API makes a clear distinction between +composing and cropping operations by setting the appropriate targets. The V4L2 +API lacks any support for composing to and cropping from an image inside a +memory buffer. The application could configure a capture device to fill only a +part of an image by abusing V4L2 API. Cropping a smaller image from a larger +one is achieved by setting the field +&v4l2-pix-format;::bytesperline . Introducing an image offsets +could be done by modifying field &v4l2-buffer;::m:userptr + before calling VIDIOC_QBUF . Those +operations should be avoided because they are not portable (endianness), and do +not work for macroblock and Bayer formats and mmap buffers. The selection API +deals with configuration of buffer cropping/composing in a clear, intuitive and +portable way. Next, with the selection API the concepts of the padded target +and constraints flags are introduced. Finally, &v4l2-crop; + and &v4l2-cropcap; have no reserved +fields. Therefore there is no way to extend their functionality. The new + &v4l2-selection; provides a lot of place for future +extensions. Driver developers are encouraged to implement only selection API. +The former cropping API would be simulated using the new one. + +
+ +
+ Examples + + Resetting the cropping parameters + + (A video capture device is assumed; change +V4L2_BUF_TYPE_VIDEO_CAPTURE for other devices; change target to + V4L2_SEL_TGT_COMPOSE_* family to configure composing +area) + + + + &v4l2-selection; sel = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .target = V4L2_SEL_TGT_CROP_DEFAULT, + }; + ret = ioctl(fd, &VIDIOC-G-SELECTION;, &sel); + if (ret) + exit(-1); + sel.target = V4L2_SEL_TGT_CROP_ACTIVE; + ret = ioctl(fd, &VIDIOC-S-SELECTION;, &sel); + if (ret) + exit(-1); + + + + + + Simple downscaling + Setting a composing area on output of size of at most + half of limit placed at a center of a display. + + + &v4l2-selection; sel = { + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT, + .target = V4L2_SEL_TGT_COMPOSE_BOUNDS, + }; + struct v4l2_rect r; + + ret = ioctl(fd, &VIDIOC-G-SELECTION;, &sel); + if (ret) + exit(-1); + /* setting smaller compose rectangle */ + r.width = sel.r.width / 2; + r.height = sel.r.height / 2; + r.left = sel.r.width / 4; + r.top = sel.r.height / 4; + sel.r = r; + sel.target = V4L2_SEL_TGT_COMPOSE_ACTIVE; + sel.flags = V4L2_SEL_FLAG_LE; + ret = ioctl(fd, &VIDIOC-S-SELECTION;, &sel); + if (ret) + exit(-1); + + + + + + Querying for scaling factors + A video output device is assumed; change +V4L2_BUF_TYPE_VIDEO_OUTPUT for other devices + + + &v4l2-selection; compose = { + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT, + .target = V4L2_SEL_TGT_COMPOSE_ACTIVE, + }; + &v4l2-selection; crop = { + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT, + .target = V4L2_SEL_TGT_CROP_ACTIVE, + }; + double hscale, vscale; + + ret = ioctl(fd, &VIDIOC-G-SELECTION;, &compose); + if (ret) + exit(-1); + ret = ioctl(fd, &VIDIOC-G-SELECTION;, &crop); + if (ret) + exit(-1); + + /* computing scaling factors */ + hscale = (double)compose.r.width / crop.r.width; + vscale = (double)compose.r.height / crop.r.height; + + + + +
+ +
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 2ab365c10fb9..e97c512861bb 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -501,6 +501,7 @@ and discussions on the V4L mailing list. &sub-g-output; &sub-g-parm; &sub-g-priority; + &sub-g-selection; &sub-g-sliced-vbi-cap; &sub-g-std; &sub-g-tuner; diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml new file mode 100644 index 000000000000..a9d36e0c090e --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -0,0 +1,304 @@ + + + + ioctl VIDIOC_G_SELECTION, VIDIOC_S_SELECTION + &manvol; + + + + VIDIOC_G_SELECTION + VIDIOC_S_SELECTION + Get or set one of the selection rectangles + + + + + + int ioctl + int fd + int request + struct v4l2_selection *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_SELECTION, VIDIOC_S_SELECTION + + + + argp + + + + + + + + + Description + + + Experimental + This is an experimental + interface and may change in the future. + + + The ioctls are used to query and configure selection rectangles. + + To query the cropping (composing) rectangle set +&v4l2-selection;::type to the respective buffer type. Do not +use multiplanar buffers. Use V4L2_BUF_TYPE_VIDEO_CAPTURE + instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE +. Use V4L2_BUF_TYPE_VIDEO_OUTPUT instead of + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE . The next step is +setting &v4l2-selection;::target to value + V4L2_SEL_TGT_CROP_ACTIVE ( +V4L2_SEL_TGT_COMPOSE_ACTIVE ). Please refer to table or for additional +targets. Fields &v4l2-selection;::flags and + &v4l2-selection;::reserved are ignored and they +must be filled with zeros. The driver fills the rest of the structure or +returns &EINVAL; if incorrect buffer type or target was used. If cropping +(composing) is not supported then the active rectangle is not mutable and it is +always equal to the bounds rectangle. Finally, structure +&v4l2-selection;::r is filled with the current cropping +(composing) coordinates. The coordinates are expressed in driver-dependent +units. The only exception are rectangles for images in raw formats, whose +coordinates are always expressed in pixels. + + To change the cropping (composing) rectangle set +&v4l2-selection;::type to the respective buffer type. Do not +use multiplanar buffers. Use V4L2_BUF_TYPE_VIDEO_CAPTURE + instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE +. Use V4L2_BUF_TYPE_VIDEO_OUTPUT instead of + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE . The next step is +setting &v4l2-selection;::target to value + V4L2_SEL_TGT_CROP_ACTIVE ( +V4L2_SEL_TGT_COMPOSE_ACTIVE ). Please refer to table or for additional +targets. Set desired active area into the field +&v4l2-selection;::r . Field +&v4l2-selection;::reserved is ignored and must be filled with +zeros. The driver may adjust the rectangle coordinates. An application may +introduce constraints to control rounding behaviour. Set the field + &v4l2-selection;::flags to one of values: + + + +0 - The driver can adjust the rectangle size freely +and shall choose a crop/compose rectangle as close as possible to the requested +one. + + +V4L2_SEL_FLAG_GE - The driver is not allowed to +shrink the rectangle. The original rectangle must lay inside the adjusted +one. + + +V4L2_SEL_FLAG_LE - The driver is not allowed to +enlarge the rectangle. The adjusted rectangle must lay inside the original +one. + + +V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE - The driver +must choose the size exactly the same as in the requested rectangle. + + + +Please refer to . + + + + The driver may have to adjusts the requested dimensions against hardware +limits and other parts as the pipeline, i.e. the bounds given by the +capture/output window or TV display. The closest possible values of horizontal +and vertical offset and sizes are chosen according to following priority: + + + + Satisfy constraints from &v4l2-selection;::flags. + + + Adjust width, height, left, and top to hardware limits and alignments. + + + Keep center of adjusted rectangle as close as possible to the original one. + + + Keep width and height as close as possible to original ones. + + + Keep horizontal and vertical offset as close as possible to original ones. + + + +On success the field &v4l2-selection;::r contains +the adjusted rectangle. When the parameters are unsuitable the application may +modify the cropping (composing) or image parameters and repeat the cycle until +satisfactory parameters have been negotiated. If constraints flags have to be +violated at then ERANGE is returned. The error indicates that there +exist no rectangle that satisfies the constraints. + + + + + + Selection targets. + + &cs-def; + + + V4L2_SEL_TGT_CROP_ACTIVE + 0 + area that is currently cropped by hardware + + + V4L2_SEL_TGT_CROP_DEFAULT + 1 + suggested cropping rectangle that covers the "whole picture" + + + V4L2_SEL_TGT_CROP_BOUNDS + 2 + limits for the cropping rectangle + + + V4L2_SEL_TGT_COMPOSE_ACTIVE + 256 + area to which data are composed by hardware + + + V4L2_SEL_TGT_COMPOSE_DEFAULT + 257 + suggested composing rectangle that covers the "whole picture" + + + V4L2_SEL_TGT_COMPOSE_BOUNDS + 258 + limits for the composing rectangle + + + V4L2_SEL_TGT_COMPOSE_PADDED + 259 + the active area and all padding pixels that are inserted or modified by the hardware + + + +
+ + + + + Selection constraint flags + + &cs-def; + + + V4L2_SEL_FLAG_GE + 0x00000001 + indicate that adjusted rectangle must contain a rectangle from &v4l2-selection;::r + + + V4L2_SEL_FLAG_LE + 0x00000002 + indicate that adjusted rectangle must be inside a rectangle from &v4l2-selection;::r + + + +
+ + +
+
+ Size adjustments with constraint flags. + + + + + + Behaviour of rectangle adjustment for different constraint + flags. + + +
+
+ + + + struct <structname>v4l2_selection</structname> + + &cs-str; + + + __u32 + type + Type of the buffer (from &v4l2-buf-type;) + + + __u32 + target + used to select between cropping and composing rectangles + + + __u32 + flags + control over coordinates adjustments, refer to selection flags + + + &v4l2-rect; + r + selection rectangle + + + __u32 + reserved[9] + Reserved fields for future use + + + +
+ + + + &return-value; + + + EINVAL + + The buffer &v4l2-selection;::type +or &v4l2-selection;::target is not supported, or +the &v4l2-selection;::flags are invalid. + + + + ERANGE + + it is not possible to adjust a rectangle +&v4l2-selection;::r that satisfies all contraints from + &v4l2-selection;::flags . + + + + EBUSY + + it is not possible to apply change of selection rectangle at the moment. +Usually because streaming is in progress. + + + + + + -- cgit v1.2.2 From aa73ab96bebb6fb9e0ee4429f78bfa3ef8c5b6b6 Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski Date: Fri, 9 Dec 2011 13:45:47 -0300 Subject: [media] doc: v4l: selection: choose pixels as units for selection rectangles Pixels were preferred units for selection rectangles over driver-dependent units for almost all use cases. Therefore the units were fixed to pixels. Signed-off-by: Tomasz Stanislawski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/selection-api.xml | 30 +++++++++-------------- 1 file changed, 12 insertions(+), 18 deletions(-) (limited to 'Documentation/DocBook/media/v4l') diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index 46cb47ab8e3b..2f0bdb4d5551 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -84,9 +84,7 @@ configure the cropping targets before to the composing targets. areas that can be sampled is given by the V4L2_SEL_TGT_CROP_BOUNDS target. It is recommended for the driver developers to put the top/left corner at position (0,0) . The rectangle's -coordinates are expressed in driver dependant units, although the coordinate -system guarantees that if sizes of the active cropping and the active composing -rectangles are equal then no scaling is performed. +coordinates are expressed in pixels. The top left corner, width and height of the source rectangle, that is the area actually sampled, is given by the V4L2_SEL_TGT_CROP_ACTIVE @@ -103,10 +101,10 @@ not later. The composing targets refer to a memory buffer. The limits of composing coordinates are obtained using V4L2_SEL_TGT_COMPOSE_BOUNDS -. All coordinates are expressed in natural unit for given formats. -Pixels are highly recommended. The rectangle's top/left corner must be located -at position (0,0) . The width and height are equal to the -image size set by VIDIOC_S_FMT . +. All coordinates are expressed in pixels. The rectangle's top/left +corner must be located at position (0,0) . The width and +height are equal to the image size set by VIDIOC_S_FMT . + The part of a buffer into which the image is inserted by the hardware is controlled by the V4L2_SEL_TGT_COMPOSE_ACTIVE target. @@ -145,10 +143,9 @@ the cropping targets. The cropping targets refer to the memory buffer that contains an image to be inserted into a video signal or graphical screen. The limits of cropping coordinates are obtained using V4L2_SEL_TGT_CROP_BOUNDS . -All coordinates are expressed in natural units for a given format. Pixels are -highly recommended. The top/left corner is always point (0,0) -. The width and height is equal to the image size specified using - VIDIOC_S_FMT ioctl. +All coordinates are expressed in pixels. The top/left corner is always point + (0,0) . The width and height is equal to the image size +specified using VIDIOC_S_FMT ioctl. The top left corner, width and height of the source rectangle, that is the area from which image date are processed by the hardware, is given by the @@ -163,13 +160,10 @@ limitations. bounding rectangle. The part of a video signal or graphics display where the image is -inserted by the hardware is controlled by V4L2_SEL_TGT_COMPOSE_ACTIVE - target. The rectangle's coordinates are expressed in driver -dependant units. The only exception are digital outputs where the units are -pixels. For other types of devices, the coordinate system guarantees that if -sizes of the active cropping and the active composing rectangles are equal then -no scaling is performed. The composing rectangle must lie completely inside -the bounds rectangle. The driver must adjust the area to fit to the bounding +inserted by the hardware is controlled by +V4L2_SEL_TGT_COMPOSE_ACTIVE target. The rectangle's coordinates +are expressed in pixels. The composing rectangle must lie completely inside the +bounds rectangle. The driver must adjust the area to fit to the bounding limits. Moreover, the driver can perform other adjustments according to hardware limitations. -- cgit v1.2.2