From 6f5986bce558e64fe867bff600a2127a3cb0c006 Mon Sep 17 00:00:00 2001 From: Joe Jin Date: Mon, 15 Aug 2011 12:51:31 +0800 Subject: xen-blkback: Don't disconnect backend until state switched to XenbusStateClosed. When do block-attach/block-detach test with below steps, umount hangs in the guest. Furthermore shutdown ends up being stuck when umounting file-systems. 1. start guest. 2. attach new block device by xm block-attach in Dom0. 3. mount new disk in guest. 4. execute xm block-detach to detach the block device in dom0 until timeout 5. Any request to the disk will hung. Root cause: This issue is caused when setting backend device's state to 'XenbusStateClosing', which sends to the frontend the XenbusStateClosing notification. When frontend receives the notification it tries to release the disk in blkfront_closing(), but at that moment the disk is still in use by guest, so frontend refuses to close. Specifically it sets the disk state to XenbusStateClosing and sends the notification to backend - when backend receives the event, it disconnects the vbd from real device, and sets the vbd device state to XenbusStateClosing. The backend disconnects the real device/file, and any IO requests to the disk in guest will end up in ether, leaving disk DEAD and set to XenbusStateClosing. When the guest wants to disconnect the disk, umount will hang on blkif_release()->xlvbd_release_gendisk() as it is unable to send any IO to the disk, which prevents clean system shutdown. Solution: Don't disconnect backend until frontend state switched to XenbusStateClosed. Signed-off-by: Joe Jin Cc: Daniel Stodden Cc: Jens Axboe Cc: Annie Li Cc: Ian Campbell [v1: Modified description a bit] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 6cc0db1bf522..7be3d0fe8ad3 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -601,11 +601,11 @@ static void frontend_changed(struct xenbus_device *dev, break; case XenbusStateClosing: - xen_blkif_disconnect(be->blkif); xenbus_switch_state(dev, XenbusStateClosing); break; case XenbusStateClosed: + xen_blkif_disconnect(be->blkif); xenbus_switch_state(dev, XenbusStateClosed); if (xenbus_dev_is_online(dev)) break; -- cgit v1.2.2 From 1bc05b0ae6448b20d46076899e0cc12ad999e50e Mon Sep 17 00:00:00 2001 From: Joe Jin Date: Mon, 15 Aug 2011 12:57:07 +0800 Subject: xen-blkback: fixed indentation and comments This patch fixes belows: 1. Fix code style issue. 2. Fix incorrect functions name in comments. Signed-off-by: Joe Jin Cc: Jens Axboe Cc: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/common.h | 2 +- drivers/block/xen-blkback/xenbus.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 9e40b283a468..00c57c90e2d6 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -46,7 +46,7 @@ #define DRV_PFX "xen-blkback:" #define DPRINTK(fmt, args...) \ - pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \ + pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \ __func__, __LINE__, ##args) diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 7be3d0fe8ad3..a96cb5f893a8 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -590,7 +590,7 @@ static void frontend_changed(struct xenbus_device *dev, /* * Enforce precondition before potential leak point. - * blkif_disconnect() is idempotent. + * xen_blkif_disconnect() is idempotent. */ xen_blkif_disconnect(be->blkif); @@ -611,7 +611,7 @@ static void frontend_changed(struct xenbus_device *dev, break; /* fall through if not online */ case XenbusStateUnknown: - /* implies blkif_disconnect() via blkback_remove() */ + /* implies xen_blkif_disconnect() via xen_blkbk_remove() */ device_unregister(&dev->dev); break; -- cgit v1.2.2 From 5dc06c5a70b79a323152bec7e55783e705767e63 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 23 Aug 2011 14:49:55 +0200 Subject: block: remove READ_META and WRITE_META Replace all occurnanced of the undocumented READ_META with READ | REQ_META and remove the unused WRITE_META define. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- fs/ext3/inode.c | 4 ++-- fs/ext3/namei.c | 2 +- fs/ext4/inode.c | 4 ++-- fs/ext4/namei.c | 2 +- fs/gfs2/quota.c | 2 +- include/linux/fs.h | 2 -- 6 files changed, 7 insertions(+), 9 deletions(-) diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 04da6acde85d..bba7b96e0d9b 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1134,7 +1134,7 @@ struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -2807,7 +2807,7 @@ make_io: trace_ext3_load_inode(inode); get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ_META, bh); + submit_bh(READ | REQ_META, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { ext3_error(inode->i_sb, "ext3_get_inode_loc", diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 5571708b6a58..c7d4032aa82a 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -922,7 +922,7 @@ restart: bh = ext3_getblk(NULL, dir, b++, 0, &err); bh_use[ra_max] = bh; if (bh) - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META, 1, &bh); } } if ((bh = bh_use[ra_ptr++]) == NULL) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c4da98a959ae..1dfa18feeb3e 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -650,7 +650,7 @@ struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -3301,7 +3301,7 @@ make_io: trace_ext4_load_inode(inode); get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ_META, bh); + submit_bh(READ | REQ_META, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { EXT4_ERROR_INODE_BLOCK(inode, block, diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index f8068c7bae9f..d36315ae629e 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -922,7 +922,7 @@ restart: bh = ext4_getblk(NULL, dir, b++, 0, &err); bh_use[ra_max] = bh; if (bh) - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META, 1, &bh); } } if ((bh = bh_use[ra_ptr++]) == NULL) diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index 42e8d23bc047..053434049dbb 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -709,7 +709,7 @@ get_a_page: set_buffer_uptodate(bh); if (!buffer_uptodate(bh)) { - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META, 1, &bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) goto unlock_out; diff --git a/include/linux/fs.h b/include/linux/fs.h index 178cdb4f1d4a..eae44c981173 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -162,10 +162,8 @@ struct inodes_stat_t { #define READA RWA_MASK #define READ_SYNC (READ | REQ_SYNC) -#define READ_META (READ | REQ_META) #define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE) #define WRITE_ODIRECT (WRITE | REQ_SYNC) -#define WRITE_META (WRITE | REQ_META) #define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH) #define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA) #define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) -- cgit v1.2.2 From 65299a3b788bd274bed92f9fa3232082c9f3ea70 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 23 Aug 2011 14:50:29 +0200 Subject: block: separate priority boosting from REQ_META Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule, and lave REQ_META purely for marking requests as metadata in blktrace. All existing callers of REQ_META except for XFS are updated to also set REQ_PRIO for now. Signed-off-by: Christoph Hellwig Reviewed-by: Namhyung Kim Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 20 ++++++++++---------- drivers/mmc/card/block.c | 3 +++ fs/ext3/inode.c | 4 ++-- fs/ext3/namei.c | 3 ++- fs/ext4/inode.c | 4 ++-- fs/ext4/namei.c | 3 ++- fs/gfs2/log.c | 4 ++-- fs/gfs2/meta_io.c | 6 +++--- fs/gfs2/ops_fstype.c | 2 +- fs/gfs2/quota.c | 2 +- include/linux/blk_types.h | 6 ++++-- 11 files changed, 32 insertions(+), 25 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index a33bd4377c61..16ace89613bc 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -130,8 +130,8 @@ struct cfq_queue { unsigned long slice_end; long slice_resid; - /* pending metadata requests */ - int meta_pending; + /* pending priority requests */ + int prio_pending; /* number of requests that are on the dispatch list or inside driver */ int dispatched; @@ -684,8 +684,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2, if (rq_is_sync(rq1) != rq_is_sync(rq2)) return rq_is_sync(rq1) ? rq1 : rq2; - if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META) - return rq1->cmd_flags & REQ_META ? rq1 : rq2; + if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO) + return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2; s1 = blk_rq_pos(rq1); s2 = blk_rq_pos(rq2); @@ -1612,9 +1612,9 @@ static void cfq_remove_request(struct request *rq) cfqq->cfqd->rq_queued--; cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq), rq_is_sync(rq)); - if (rq->cmd_flags & REQ_META) { - WARN_ON(!cfqq->meta_pending); - cfqq->meta_pending--; + if (rq->cmd_flags & REQ_PRIO) { + WARN_ON(!cfqq->prio_pending); + cfqq->prio_pending--; } } @@ -3372,7 +3372,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * So both queues are sync. Let the new request get disk time if * it's a metadata request and the current queue is doing regular IO. */ - if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending) + if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending) return true; /* @@ -3439,8 +3439,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct cfq_io_context *cic = RQ_CIC(rq); cfqd->rq_queued++; - if (rq->cmd_flags & REQ_META) - cfqq->meta_pending++; + if (rq->cmd_flags & REQ_PRIO) + cfqq->prio_pending++; cfq_update_io_thinktime(cfqd, cfqq, cic); cfq_update_io_seektime(cfqd, cfqq, rq); diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 1ff5486213fb..4c1a648d00fc 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -926,6 +926,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, /* * Reliable writes are used to implement Forced Unit Access and * REQ_META accesses, and are supported only on MMCs. + * + * XXX: this really needs a good explanation of why REQ_META + * is treated special. */ bool do_rel_wr = ((req->cmd_flags & REQ_FUA) || (req->cmd_flags & REQ_META)) && diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index bba7b96e0d9b..12661e1deedd 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1134,7 +1134,7 @@ struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ | REQ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -2807,7 +2807,7 @@ make_io: trace_ext3_load_inode(inode); get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ | REQ_META, bh); + submit_bh(READ | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { ext3_error(inode->i_sb, "ext3_get_inode_loc", diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index c7d4032aa82a..0629e09f6511 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -922,7 +922,8 @@ restart: bh = ext3_getblk(NULL, dir, b++, 0, &err); bh_use[ra_max] = bh; if (bh) - ll_rw_block(READ | REQ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, + 1, &bh); } } if ((bh = bh_use[ra_ptr++]) == NULL) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 1dfa18feeb3e..c7cbb3d85d9e 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -650,7 +650,7 @@ struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ | REQ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -3301,7 +3301,7 @@ make_io: trace_ext4_load_inode(inode); get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ | REQ_META, bh); + submit_bh(READ | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { EXT4_ERROR_INODE_BLOCK(inode, block, diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index d36315ae629e..1c924faeb6c8 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -922,7 +922,8 @@ restart: bh = ext4_getblk(NULL, dir, b++, 0, &err); bh_use[ra_max] = bh; if (bh) - ll_rw_block(READ | REQ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, + 1, &bh); } } if ((bh = bh_use[ra_ptr++]) == NULL) diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 85c62923ee29..598646434362 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -624,9 +624,9 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull) bh->b_end_io = end_buffer_write_sync; get_bh(bh); if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags)) - submit_bh(WRITE_SYNC | REQ_META, bh); + submit_bh(WRITE_SYNC | REQ_META | REQ_PRIO, bh); else - submit_bh(WRITE_FLUSH_FUA | REQ_META, bh); + submit_bh(WRITE_FLUSH_FUA | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c index 747238cd9f96..be29858900f6 100644 --- a/fs/gfs2/meta_io.c +++ b/fs/gfs2/meta_io.c @@ -37,7 +37,7 @@ static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wb { struct buffer_head *bh, *head; int nr_underway = 0; - int write_op = REQ_META | + int write_op = REQ_META | REQ_PRIO | (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); BUG_ON(!PageLocked(page)); @@ -225,7 +225,7 @@ int gfs2_meta_read(struct gfs2_glock *gl, u64 blkno, int flags, } bh->b_end_io = end_buffer_read_sync; get_bh(bh); - submit_bh(READ_SYNC | REQ_META, bh); + submit_bh(READ_SYNC | REQ_META | REQ_PRIO, bh); if (!(flags & DIO_WAIT)) return 0; @@ -435,7 +435,7 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen) if (buffer_uptodate(first_bh)) goto out; if (!buffer_locked(first_bh)) - ll_rw_block(READ_SYNC | REQ_META, 1, &first_bh); + ll_rw_block(READ_SYNC | REQ_META | REQ_PRIO, 1, &first_bh); dblock++; extlen--; diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 3bc073a4cf82..079587e53849 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -224,7 +224,7 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector, int silent) bio->bi_end_io = end_bio_io_page; bio->bi_private = page; - submit_bio(READ_SYNC | REQ_META, bio); + submit_bio(READ_SYNC | REQ_META | REQ_PRIO, bio); wait_on_page_locked(page); bio_put(bio); if (!PageUptodate(page)) { diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index 053434049dbb..0e8bb13381e4 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -709,7 +709,7 @@ get_a_page: set_buffer_uptodate(bh); if (!buffer_uptodate(bh)) { - ll_rw_block(READ | REQ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) goto unlock_out; diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 32f0076e844b..71fc53bb8f1c 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -124,6 +124,7 @@ enum rq_flag_bits { __REQ_SYNC, /* request is sync (sync write or read) */ __REQ_META, /* metadata io request */ + __REQ_PRIO, /* boost priority in cfq */ __REQ_DISCARD, /* request to discard sectors */ __REQ_SECURE, /* secure discard (used with __REQ_DISCARD) */ @@ -161,14 +162,15 @@ enum rq_flag_bits { #define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER) #define REQ_SYNC (1 << __REQ_SYNC) #define REQ_META (1 << __REQ_META) +#define REQ_PRIO (1 << __REQ_PRIO) #define REQ_DISCARD (1 << __REQ_DISCARD) #define REQ_NOIDLE (1 << __REQ_NOIDLE) #define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ - (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \ - REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE) + (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \ + REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE) #define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_RAHEAD (1 << __REQ_RAHEAD) -- cgit v1.2.2 From e8037d49835482c9534a9a07bed0d0ea831135ae Mon Sep 17 00:00:00 2001 From: Eric Seppanen Date: Tue, 23 Aug 2011 21:25:12 +0200 Subject: block: Fix queue_flag update when rq_affinity goes from 2 to 1 Commit 5757a6d76cdf added the QUEUE_FLAG_SAME_FORCE flag, but fails to clear that flag when the current state is '2' (SAME_COMP + SAME_FORCE) and the new state is '1' (SAME_COMP). Acked-by: Dan Williams Reviewed-by: Roland Dreier Signed-off-by: Eric Seppanen Signed-off-by: Jens Axboe --- block/blk-sysfs.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 0ee17b5e7fb6..e681805cdb47 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -258,11 +258,13 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count) ret = queue_var_store(&val, page, count); spin_lock_irq(q->queue_lock); - if (val) { + if (val == 2) { queue_flag_set(QUEUE_FLAG_SAME_COMP, q); - if (val == 2) - queue_flag_set(QUEUE_FLAG_SAME_FORCE, q); - } else { + queue_flag_set(QUEUE_FLAG_SAME_FORCE, q); + } else if (val == 1) { + queue_flag_set(QUEUE_FLAG_SAME_COMP, q); + queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q); + } else if (val == 0) { queue_flag_clear(QUEUE_FLAG_SAME_COMP, q); queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q); } -- cgit v1.2.2 From a63271627521b825b0dd0a564e9a9c62b4c1ca89 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 24 Aug 2011 16:04:32 +0200 Subject: block: change force plug flush call order Do blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request at the tail. New request can't be merged to existing requests, but later new requests might be merged with this new one. If blk_flush_plug_list() is done later, the merge doesn't happen. Believe it or not, this fixes a 10% regression running sysbench workload. Signed-off-by: Shaohua Li Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 90e1ffdeb415..67dba6941194 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1302,11 +1302,11 @@ get_rq: if (__rq->q != q) plug->should_sort = 1; } - list_add_tail(&req->queuelist, &plug->list); - plug->count++; - drive_stat_acct(req, 1); if (plug->count >= BLK_MAX_REQUEST_COUNT) blk_flush_plug_list(plug, false); + plug->count++; + list_add_tail(&req->queuelist, &plug->list); + drive_stat_acct(req, 1); } else { spin_lock_irq(q->queue_lock); add_acct_request(q, req, where); -- cgit v1.2.2 From 56ebdaf2fa3c5276be201c5d1aff1490b682ecf2 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 24 Aug 2011 16:04:34 +0200 Subject: block: simplify force plug flush code a little bit Cleaning up the code a little bit. attempt_plug_merge() traverses the plug list anyway, we can do the request counting there, so stack size is reduced a little bit. The motivation here is I suspect if we should count the requests for each queue (task could handle multiple disks in the meantime), but my test doesn't show it's worthy doing. If somebody proves we should do it, below change will make that more easier. Signed-off-by: Shaohua Li Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-core.c | 13 +++++++------ include/linux/blkdev.h | 1 - 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 67dba6941194..b2ed78afd9f0 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1167,7 +1167,7 @@ static bool bio_attempt_front_merge(struct request_queue *q, * true if merge was successful, otherwise false. */ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, - struct bio *bio) + struct bio *bio, unsigned int *request_count) { struct blk_plug *plug; struct request *rq; @@ -1176,10 +1176,13 @@ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, plug = tsk->plug; if (!plug) goto out; + *request_count = 0; list_for_each_entry_reverse(rq, &plug->list, queuelist) { int el_ret; + (*request_count)++; + if (rq->q != q) continue; @@ -1219,6 +1222,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) struct blk_plug *plug; int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT; struct request *req; + unsigned int request_count = 0; /* * low level driver can indicate that it wants pages above a @@ -1237,7 +1241,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) * Check if we can merge with the plugged list before grabbing * any locks. */ - if (attempt_plug_merge(current, q, bio)) + if (attempt_plug_merge(current, q, bio, &request_count)) goto out; spin_lock_irq(q->queue_lock); @@ -1302,9 +1306,8 @@ get_rq: if (__rq->q != q) plug->should_sort = 1; } - if (plug->count >= BLK_MAX_REQUEST_COUNT) + if (request_count >= BLK_MAX_REQUEST_COUNT) blk_flush_plug_list(plug, false); - plug->count++; list_add_tail(&req->queuelist, &plug->list); drive_stat_acct(req, 1); } else { @@ -2634,7 +2637,6 @@ void blk_start_plug(struct blk_plug *plug) INIT_LIST_HEAD(&plug->list); INIT_LIST_HEAD(&plug->cb_list); plug->should_sort = 0; - plug->count = 0; /* * If this is a nested plug, don't actually assign it. It will be @@ -2718,7 +2720,6 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule) return; list_splice_init(&plug->list, &list); - plug->count = 0; if (plug->should_sort) { list_sort(NULL, &list, plug_rq_cmp); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 84b15d54f8c2..7fbaa9103344 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -873,7 +873,6 @@ struct blk_plug { struct list_head list; struct list_head cb_list; unsigned int should_sort; - unsigned int count; }; #define BLK_MAX_REQUEST_COUNT 16 -- cgit v1.2.2 From 5a042aa4b8e994a15d2c2ee750219971f0ab3905 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 2 Sep 2011 17:04:09 -0600 Subject: mm: Cleanup clearing of BDI_pending bit in bdi_forker_thread() bdi_forker_thread() clears BDI_pending bit at the end of the main loop. However clearing of this bit must not be done in some cases which is handled by calling 'continue' from switch statement. That's kind of unusual construct and without a good reason so change the function into more intuitive code flow. CC: Wu Fengguang CC: Andrew Morton Signed-off-by: Jan Kara Signed-off-by: Jens Axboe --- mm/backing-dev.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index d6edf8d14f9c..94a047bb6c39 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -359,6 +359,17 @@ static unsigned long bdi_longest_inactive(void) return max(5UL * 60 * HZ, interval); } +/* + * Clear pending bit and wakeup anybody waiting for flusher thread creation or + * shutdown + */ +static void bdi_clear_pending(struct backing_dev_info *bdi) +{ + clear_bit(BDI_pending, &bdi->state); + smp_mb__after_clear_bit(); + wake_up_bit(&bdi->state, BDI_pending); +} + static int bdi_forker_thread(void *ptr) { struct bdi_writeback *me = ptr; @@ -469,11 +480,13 @@ static int bdi_forker_thread(void *ptr) spin_unlock_bh(&bdi->wb_lock); wake_up_process(task); } + bdi_clear_pending(bdi); break; case KILL_THREAD: __set_current_state(TASK_RUNNING); kthread_stop(task); + bdi_clear_pending(bdi); break; case NO_ACTION: @@ -489,16 +502,8 @@ static int bdi_forker_thread(void *ptr) else schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10)); try_to_freeze(); - /* Back to the main loop */ - continue; + break; } - - /* - * Clear pending bit and wakeup anybody waiting to tear us down. - */ - clear_bit(BDI_pending, &bdi->state); - smp_mb__after_clear_bit(); - wake_up_bit(&bdi->state, BDI_pending); } return 0; -- cgit v1.2.2 From 09f40f98bfa2ac22a332a713629a2f8f92896834 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 2 Sep 2011 17:04:10 -0600 Subject: mm: Add comment explaining task state setting in bdi_forker_thread() CC: Wu Fengguang CC: Andrew Morton Signed-off-by: Jan Kara Signed-off-by: Jens Axboe --- mm/backing-dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 94a047bb6c39..a87da524a4a0 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -401,6 +401,13 @@ static int bdi_forker_thread(void *ptr) } spin_lock_bh(&bdi_lock); + /* + * In the following loop we are going to check whether we have + * some work to do without any synchronization with tasks + * waking us up to do work for them. So we have to set task + * state already here so that we don't miss wakeups coming + * after we verify some condition. + */ set_current_state(TASK_INTERRUPTIBLE); list_for_each_entry(bdi, &bdi_list, bdi_list) { -- cgit v1.2.2 From 8ad6a56f5679a987bfeacad1bd818a2a381aa98e Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 14 Sep 2011 09:31:01 +0200 Subject: block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request In __blk_complete_request, we check both QUEUE_FLAG_SAME_COMP and req->cpu to decide whether we should use req->cpu. Actually the user can also select the complete cpu by either setting BIO_CPU_AFFINE or by calling bio_set_completion_cpu. Current solution makes these 2 ways don't work any more. So we'd better just check req->cpu. Signed-off-by: Tao Ma Signed-off-by: Jens Axboe --- block/blk-softirq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 58340d0cb23a..1366a89d8e66 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -115,7 +115,7 @@ void __blk_complete_request(struct request *req) /* * Select completion CPU */ - if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) { + if (req->cpu != -1) { ccpu = req->cpu; if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) { ccpu = blk_cpu_to_group(ccpu); -- cgit v1.2.2 From d11bb4462c4cc6ddd45c6927c617ad79fa6fb8fc Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Wed, 21 Sep 2011 10:22:10 +0200 Subject: blk-cgroup: be able to remove the record of unplugged device The bug is we're not able to remove the device from blkio cgroup's per-device control files if it gets unplugged. To reproduce the bug: # mount -t cgroup -o blkio xxx /cgroup # cd /cgroup # echo "8:0 1000" > blkio.throttle.read_bps_device # unplug the device # cat blkio.throttle.read_bps_device 8:0 1000 # echo "8:0 0" > blkio.throttle.read_bps_device -bash: echo: write error: No such device After patching, the device removal will succeed. Thanks for the comments of Paul, Zefan, and Vivek. Signed-off-by: Wanlong Gao Cc: Li Zefan Cc: Paul Menage Acked-by: Vivek Goyal Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 37 ++++++++++++++++--------------------- 1 file changed, 16 insertions(+), 21 deletions(-) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index bcaf16ee6ad1..b596e54ddd71 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -785,10 +785,10 @@ static int blkio_policy_parse_and_set(char *buf, { char *s[4], *p, *major_s = NULL, *minor_s = NULL; int ret; - unsigned long major, minor, temp; + unsigned long major, minor; int i = 0; dev_t dev; - u64 bps, iops; + u64 temp; memset(s, 0, sizeof(s)); @@ -826,20 +826,23 @@ static int blkio_policy_parse_and_set(char *buf, dev = MKDEV(major, minor); - ret = blkio_check_dev_num(dev); + ret = strict_strtoull(s[1], 10, &temp); if (ret) - return ret; + return -EINVAL; - newpn->dev = dev; + /* For rule removal, do not check for device presence. */ + if (temp) { + ret = blkio_check_dev_num(dev); + if (ret) + return ret; + } - if (s[1] == NULL) - return -EINVAL; + newpn->dev = dev; switch (plid) { case BLKIO_POLICY_PROP: - ret = strict_strtoul(s[1], 10, &temp); - if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) || - temp > BLKIO_WEIGHT_MAX) + if ((temp < BLKIO_WEIGHT_MIN && temp > 0) || + temp > BLKIO_WEIGHT_MAX) return -EINVAL; newpn->plid = plid; @@ -850,26 +853,18 @@ static int blkio_policy_parse_and_set(char *buf, switch(fileid) { case BLKIO_THROTL_read_bps_device: case BLKIO_THROTL_write_bps_device: - ret = strict_strtoull(s[1], 10, &bps); - if (ret) - return -EINVAL; - newpn->plid = plid; newpn->fileid = fileid; - newpn->val.bps = bps; + newpn->val.bps = temp; break; case BLKIO_THROTL_read_iops_device: case BLKIO_THROTL_write_iops_device: - ret = strict_strtoull(s[1], 10, &iops); - if (ret) - return -EINVAL; - - if (iops > THROTL_IOPS_MAX) + if (temp > THROTL_IOPS_MAX) return -EINVAL; newpn->plid = plid; newpn->fileid = fileid; - newpn->val.iops = (unsigned int)iops; + newpn->val.iops = (unsigned int)temp; break; } break; -- cgit v1.2.2 From 6c4867f6469964e34c5f4ee229a2a7f71a34c7ff Mon Sep 17 00:00:00 2001 From: Carsten Emde Date: Wed, 21 Sep 2011 10:22:11 +0200 Subject: floppy: use del_timer_sync() in init cleanup When no floppy is found the module code can be released while a timer function is pending or about to be executed. CPU0 CPU1 floppy_init() timer_softirq() spin_lock_irq(&base->lock); detach_timer(); spin_unlock_irq(&base->lock); -> Interrupt del_timer(); return -ENODEV; module_cleanup(); <- EOI call_timer_fn(); OOPS Use del_timer_sync() to prevent this. Signed-off-by: Carsten Emde Signed-off-by: Thomas Gleixner Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 98de8f418676..9955a53733b2 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4250,7 +4250,7 @@ static int __init floppy_init(void) use_virtual_dma = can_use_virtual_dma & 1; fdc_state[0].address = FDC1; if (fdc_state[0].address == -1) { - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); err = -ENODEV; goto out_unreg_region; } @@ -4261,7 +4261,7 @@ static int __init floppy_init(void) fdc = 0; /* reset fdc in case of unexpected interrupt */ err = floppy_grab_irq_and_dma(); if (err) { - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); err = -EBUSY; goto out_unreg_region; } @@ -4318,7 +4318,7 @@ static int __init floppy_init(void) user_reset_fdc(-1, FD_RESET_ALWAYS, false); } fdc = 0; - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); current_drive = 0; initialized = true; if (have_no_fdc) { @@ -4368,7 +4368,7 @@ out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: while (dr--) { - del_timer(&motor_off_timer[dr]); + del_timer_sync(&motor_off_timer[dr]); if (disks[dr]->queue) blk_cleanup_queue(disks[dr]->queue); put_disk(disks[dr]); -- cgit v1.2.2