From 986a80d5c154808cc78170584670324a22fd8219 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 16 Jun 2005 15:14:00 -0700 Subject: [PATCH] avoid signed vs unsigned comparison in efi_range_is_wc() warning when building with gcc -W : include/linux/efi.h: In function `efi_range_is_wc': include/linux/efi.h:320: warning: comparison between signed and unsigned It looks to me like a significantly large 'len' passed in could cause the loop to never end. Isn't it safer to make 'i' an unsigned long as well? Like this little patch below (which of course also kills the warning) : Signed-off-by: Jesper Juhl Signed-off-by: Tony Luck --- include/linux/efi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/efi.h b/include/linux/efi.h index 047e7222df7a..73781ec165b4 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -315,7 +315,7 @@ extern struct efi_memory_map memmap; */ static inline int efi_range_is_wc(unsigned long start, unsigned long len) { - int i; + unsigned long i; for (i = 0; i < len; i += (1UL << EFI_PAGE_SHIFT)) { unsigned long paddr = __pa(start + i); -- cgit v1.2.2 From 34b727c135ff651f153be5757056d25678b6d018 Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Thu, 9 Jun 2005 22:36:00 -0700 Subject: [IA64] Drop spurious paren in entry.h The latest assembler catches this typo. (reported by Jim Wilson). Signed-off-by: David Mosberger-Tang Signed-off-by: Tony Luck --- arch/ia64/kernel/entry.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kernel/entry.h b/arch/ia64/kernel/entry.h index 6d4ecec989b5..78eeb0793419 100644 --- a/arch/ia64/kernel/entry.h +++ b/arch/ia64/kernel/entry.h @@ -60,7 +60,7 @@ .spillsp @priunat,SW(AR_UNAT)+16+(off); \ .spillsp ar.rnat,SW(AR_RNAT)+16+(off); \ .spillsp ar.bspstore,SW(AR_BSPSTORE)+16+(off); \ - .spillsp pr,SW(PR)+16+(off)) + .spillsp pr,SW(PR)+16+(off) #define DO_SAVE_SWITCH_STACK \ movl r28=1f; \ -- cgit v1.2.2 From 95dccdfe29a76c513e29f88f366612d7570adab3 Mon Sep 17 00:00:00 2001 From: Greg Edwards Date: Tue, 21 Jun 2005 10:43:00 -0700 Subject: [IA64] refresh arch/ia64/defconfig Refresh arch/ia64/defconfig, as it was getting a bit stale. The only manual changes I made were: CONFIG_SCSI_SATA=y needed for some Altix base I/O cards CONFIG_SCSI_SATA_VITESSE=y CONFIG_DM_MULTIPATH=m the rest are already modules CONFIG_FUSION_SPI=y new driver breakout CONFIG_FUSION_FC=m CONFIG_SGI_TIOCX=y enable some other SGI drivers CONFIG_SGI_MBCS=m CONFIG_AGP_SGI_TIOCA=m Boot tested on Altix, HP rx2600 and Intel Tiger Signed-off-by: Greg Edwards Signed-off-by: Tony Luck --- arch/ia64/defconfig | 138 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 91 insertions(+), 47 deletions(-) diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 7539e83bf054..2aea0f9e6e1d 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10 -# Thu Jan 6 11:13:13 2005 +# Linux kernel version: 2.6.12 +# Tue Jun 21 11:30:42 2005 # # @@ -10,6 +10,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -21,24 +22,27 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=20 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -63,9 +67,11 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set @@ -77,6 +83,7 @@ CONFIG_IA64_PAGE_SIZE_16KB=y CONFIG_IA64_L1_CACHE_SHIFT=7 CONFIG_NUMA=y CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y CONFIG_DISCONTIGMEM=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y @@ -84,6 +91,7 @@ CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y +# CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y @@ -135,6 +143,7 @@ CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCI Hotplug Support @@ -144,7 +153,6 @@ CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_PCIE is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # @@ -152,10 +160,6 @@ CONFIG_HOTPLUG_PCI_ACPI=m # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # Device Drivers # @@ -190,6 +194,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -209,6 +214,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -283,6 +289,7 @@ CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -310,13 +317,21 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -326,7 +341,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set CONFIG_SCSI_QLOGIC_FC=y # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y @@ -337,6 +351,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -359,12 +374,16 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set # # Fusion MPT device support # CONFIG_FUSION=y -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION_SPI=y +CONFIG_FUSION_FC=m +CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set # @@ -387,7 +406,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -447,7 +465,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -484,9 +501,7 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set CONFIG_E100=m -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -508,9 +523,11 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -567,25 +584,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -CONFIG_GAMEPORT=m -CONFIG_SOUND_GAMEPORT=m -# CONFIG_GAMEPORT_NS558 is not set -# CONFIG_GAMEPORT_L4 is not set -# CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set -# CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461x is not set -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -603,6 +601,23 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set +# CONFIG_GAMEPORT_EMU10K1 is not set +# CONFIG_GAMEPORT_VORTEX is not set +# CONFIG_GAMEPORT_FM801 is not set +# CONFIG_GAMEPORT_CS461X is not set + # # Character devices # @@ -613,11 +628,15 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_SYNCLINK is not set +# CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set # CONFIG_STALDRV is not set CONFIG_SGI_SNSC=y +CONFIG_SGI_TIOCX=y +CONFIG_SGI_MBCS=m # # Serial drivers @@ -638,6 +657,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -663,6 +683,7 @@ CONFIG_EFI_RTC=y CONFIG_AGP=m CONFIG_AGP_I460=m CONFIG_AGP_HP_ZX1=m +CONFIG_AGP_SGI_TIOCA=m CONFIG_DRM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m @@ -674,8 +695,14 @@ CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + # # I2C support # @@ -760,6 +787,8 @@ CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -784,13 +813,14 @@ CONFIG_SND_FM801=m # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set # # Open Sound System @@ -800,6 +830,8 @@ CONFIG_SND_FM801=m # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -811,8 +843,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -821,6 +851,8 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set @@ -838,12 +870,11 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -893,6 +924,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=m # # USB port drivers @@ -908,7 +940,6 @@ CONFIG_USB_HIDINPUT=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -917,6 +948,8 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -964,7 +997,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=y +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -1042,7 +1080,7 @@ CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m +CONFIG_EXPORTFS=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1128,6 +1166,8 @@ CONFIG_NLS_UTF8=m # CONFIG_CRC_CCITT is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # HP Simulator drivers @@ -1144,14 +1184,17 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=20 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1178,6 +1221,7 @@ CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set -- cgit v1.2.2 From bd91c4bb134a3c5b04969f5ab960a3fd48778bcc Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Tue, 21 Jun 2005 14:16:00 -0700 Subject: [IA64] Refresh tiger_defconfig Signed-off-by: Tony Luck --- arch/ia64/configs/tiger_defconfig | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 9086b789f6ac..47f45341ac62 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc3 -# Tue May 3 15:55:04 2005 +# Linux kernel version: 2.6.12-20050621 +# Tue Jun 21 14:03:24 2005 # # @@ -67,6 +67,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -285,6 +286,7 @@ CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -313,11 +315,8 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -366,8 +365,10 @@ CONFIG_DM_ZERO=m # Fusion MPT device support # CONFIG_FUSION=y -CONFIG_FUSION_MAX_SGE=40 -# CONFIG_FUSION_CTL is not set +CONFIG_FUSION_SPI=y +CONFIG_FUSION_FC=y +CONFIG_FUSION_MAX_SGE=128 +CONFIG_FUSION_CTL=y # # IEEE 1394 (FireWire) support @@ -506,9 +507,11 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -598,7 +601,6 @@ CONFIG_GAMEPORT=m # CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set # CONFIG_GAMEPORT_CS461X is not set -CONFIG_SOUND_GAMEPORT=m # # Character devices @@ -611,7 +613,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_CYCLADES is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set -- cgit v1.2.2 From a35f1e03b868a3179fa12344ec0d46a44fbf7574 Mon Sep 17 00:00:00 2001 From: Greg Edwards Date: Tue, 21 Jun 2005 11:30:00 -0700 Subject: [IA64] enable SGI simulator for generic kernels Allow the SGI simulator (medusa) to work on generic kernels. There is no inherent dependency on an sn2-specific kernel. Boot tested on Altix, medusa and HP rx2600. Signed-off-by: Greg Edwards Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 3ad2c4af099c..992bcfff7913 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -216,7 +216,7 @@ config IOSAPIC config IA64_SGI_SN_SIM bool "SGI Medusa Simulator Support" - depends on IA64_SGI_SN2 + depends on IA64_SGI_SN2 || IA64_GENERIC help If you are compiling a kernel that will run under SGI's IA-64 simulator (Medusa) then say Y, otherwise say N. -- cgit v1.2.2 From 52a0de2cd2d3da8f90d88e2eccb63d0cadd6ae26 Mon Sep 17 00:00:00 2001 From: Christophe Lucas Date: Mon, 20 Jun 2005 14:50:00 -0700 Subject: [IA64] printk needs KERN_INFO arch/ia64/kernel/smp.c printk() calls should include appropriate KERN_* constant. Signed-off-by: Christophe Lucas Signed-off-by: Domen Puncer Signed-off-by: Tony Luck --- arch/ia64/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 953095e2ce15..b49d4ddaab93 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -269,7 +269,7 @@ smp_call_function_single (int cpuid, void (*func) (void *info), void *info, int int me = get_cpu(); /* prevent preemption and reschedule on another processor */ if (cpuid == me) { - printk("%s: trying to call self\n", __FUNCTION__); + printk(KERN_INFO "%s: trying to call self\n", __FUNCTION__); put_cpu(); return -EBUSY; } -- cgit v1.2.2 From 0393eed5c3220c9c3823a09a2d02329b8ff08b45 Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Tue, 21 Jun 2005 14:40:31 -0700 Subject: [IA64] fix nested_dtlb_miss handler for hugetlb address The nested_dtlb_miss handler currently does not handle fault from hugetlb address correctly. It walks the page table assuming PAGE_SIZE. Thus when taking a fault triggered from hugetlb address, it would not calculate the pgd/pmd/pte address correctly and thus result an incorrect invocation of ia64_do_page_fault(). In there, kernel will signal SIGBUS and application dies (The faulting address is perfectly legal and we have a valid pte for the corresponding user hugetlb address as well). This patch fix the described kernel bug. Since nested_dtlb_miss is a rare event and a slow path anyway, I'm making the change without #ifdef CONFIG_HUGETLB_PAGE for code readability. Tony, please apply. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/kernel/ivt.S | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index d9c05d53435b..2bc085a73e30 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -405,17 +405,22 @@ ENTRY(nested_dtlb_miss) * r30: continuation address * r31: saved pr * - * Clobbered: b0, r18, r19, r21, psr.dt (cleared) + * Clobbered: b0, r18, r19, r21, r22, psr.dt (cleared) */ rsm psr.dt // switch to using physical data addressing mov r19=IA64_KR(PT_BASE) // get the page table base address shl r21=r16,3 // shift bit 60 into sign bit + mov r18=cr.itir ;; shr.u r17=r16,61 // get the region number into r17 + extr.u r18=r18,2,6 // get the faulting page size ;; cmp.eq p6,p7=5,r17 // is faulting address in region 5? - shr.u r18=r16,PGDIR_SHIFT // get bits 33-63 of faulting address + add r22=-PAGE_SHIFT,r18 // adjustment for hugetlb address + add r18=PGDIR_SHIFT-PAGE_SHIFT,r18 ;; + shr.u r22=r16,r22 + shr.u r18=r16,r18 (p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place srlz.d @@ -428,7 +433,7 @@ ENTRY(nested_dtlb_miss) (p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 (p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) cmp.eq p7,p6=0,r21 // unused address bits all zeroes? - shr.u r18=r16,PMD_SHIFT // shift L2 index into position + shr.u r18=r22,PMD_SHIFT // shift L2 index into position ;; ld8 r17=[r17] // fetch the L1 entry (may be 0) ;; @@ -436,7 +441,7 @@ ENTRY(nested_dtlb_miss) dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry ;; (p7) ld8 r17=[r17] // fetch the L2 entry (may be 0) - shr.u r19=r16,PAGE_SHIFT // shift L3 index into position + shr.u r19=r22,PAGE_SHIFT // shift L3 index into position ;; (p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL? dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry -- cgit v1.2.2 From 7b404b3459db1326bbdc7085edb1f58b98da5826 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 13 Jun 2005 11:27:00 -0700 Subject: [IA64] remove "pci=routeirq" option Remove "pci=routeirq" option for ia64. This was a workaround after ACPI IRQ routing was changed from "all at boot for everything in _PRT" to "do it when the device is enabled" in case there were drivers that didn't use pci_enable_device(). Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/pci/pci.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 88641e5095b5..e3fc4edea113 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -33,8 +33,6 @@ #include -static int pci_routeirq; - /* * Low-level SAL-based PCI configuration access functions. Note that SAL * calls are already serialized (via sal_lock), so we don't need another @@ -139,24 +137,8 @@ static void acpi_map_iosapics(void) static int __init pci_acpi_init (void) { - struct pci_dev *dev = NULL; - - printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); - acpi_map_iosapics(); - if (pci_routeirq) { - /* - * PCI IRQ routing is set up by pci_enable_device(), but we - * also do it here in case there are still broken drivers that - * don't use pci_enable_device(). - */ - printk(KERN_INFO "PCI: Routing interrupts for all devices because \"pci=routeirq\" specified\n"); - for_each_pci_dev(dev) - acpi_pci_irq_enable(dev); - } else - printk(KERN_INFO "PCI: If a device doesn't work, try \"pci=routeirq\". If it helps, post a report\n"); - return 0; } @@ -500,8 +482,6 @@ pcibios_align_resource (void *data, struct resource *res, char * __init pcibios_setup (char *str) { - if (!strcmp(str, "routeirq")) - pci_routeirq = 1; return NULL; } -- cgit v1.2.2 From 4ea78729b8dbfc400fe165a57b90a394a7275a54 Mon Sep 17 00:00:00 2001 From: Matthew Chapman Date: Tue, 21 Jun 2005 16:19:20 -0700 Subject: [IA64] ptrace and restore_sigcontext() allow ar.rsc.pl==0 This patch fixes handling of accesses to ar.rsc via ptrace & restore_sigcontext [With Thanks to Chris Wright for noticing the restore_sigcontext path] Signed-off-by: Matthew Chapman Acked-by: David Mosberger Signed-off-by: Tony Luck --- arch/ia64/kernel/ptrace.c | 15 ++++++++++----- arch/ia64/kernel/signal.c | 5 +++-- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 575a8f657b31..6d57aebad485 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -945,6 +945,13 @@ access_uarea (struct task_struct *child, unsigned long addr, *data = (pt->cr_ipsr & IPSR_MASK); return 0; + case PT_AR_RSC: + if (write_access) + pt->ar_rsc = *data | (3 << 2); /* force PL3 */ + else + *data = pt->ar_rsc; + return 0; + case PT_AR_RNAT: urbs_end = ia64_get_user_rbs_end(child, pt, NULL); rnat_addr = (long) ia64_rse_rnat_addr((long *) @@ -996,9 +1003,6 @@ access_uarea (struct task_struct *child, unsigned long addr, case PT_AR_BSPSTORE: ptr = pt_reg_addr(pt, ar_bspstore); break; - case PT_AR_RSC: - ptr = pt_reg_addr(pt, ar_rsc); - break; case PT_AR_UNAT: ptr = pt_reg_addr(pt, ar_unat); break; @@ -1234,7 +1238,7 @@ ptrace_getregs (struct task_struct *child, struct pt_all_user_regs __user *ppr) static long ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user *ppr) { - unsigned long psr, ec, lc, rnat, bsp, cfm, nat_bits, val = 0; + unsigned long psr, rsc, ec, lc, rnat, bsp, cfm, nat_bits, val = 0; struct unw_frame_info info; struct switch_stack *sw; struct ia64_fpreg fpval; @@ -1267,7 +1271,7 @@ ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user *ppr) /* app regs */ retval |= __get_user(pt->ar_pfs, &ppr->ar[PT_AUR_PFS]); - retval |= __get_user(pt->ar_rsc, &ppr->ar[PT_AUR_RSC]); + retval |= __get_user(rsc, &ppr->ar[PT_AUR_RSC]); retval |= __get_user(pt->ar_bspstore, &ppr->ar[PT_AUR_BSPSTORE]); retval |= __get_user(pt->ar_unat, &ppr->ar[PT_AUR_UNAT]); retval |= __get_user(pt->ar_ccv, &ppr->ar[PT_AUR_CCV]); @@ -1365,6 +1369,7 @@ ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user *ppr) retval |= __get_user(nat_bits, &ppr->nat); retval |= access_uarea(child, PT_CR_IPSR, &psr, 1); + retval |= access_uarea(child, PT_AR_RSC, &rsc, 1); retval |= access_uarea(child, PT_AR_EC, &ec, 1); retval |= access_uarea(child, PT_AR_LC, &lc, 1); retval |= access_uarea(child, PT_AR_RNAT, &rnat, 1); diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 499b7e5317cf..edd9f07860b2 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -94,7 +94,7 @@ sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2, static long restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) { - unsigned long ip, flags, nat, um, cfm; + unsigned long ip, flags, nat, um, cfm, rsc; long err; /* Always make any pending restarted system calls return -EINTR */ @@ -106,7 +106,7 @@ restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) err |= __get_user(ip, &sc->sc_ip); /* instruction pointer */ err |= __get_user(cfm, &sc->sc_cfm); err |= __get_user(um, &sc->sc_um); /* user mask */ - err |= __get_user(scr->pt.ar_rsc, &sc->sc_ar_rsc); + err |= __get_user(rsc, &sc->sc_ar_rsc); err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat); err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr); err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs); @@ -119,6 +119,7 @@ restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8); /* r15 */ scr->pt.cr_ifs = cfm | (1UL << 63); + scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */ /* establish new instruction pointer: */ scr->pt.cr_iip = ip & ~0x3UL; -- cgit v1.2.2