From e9edcee061a80181f0d6e7cada07e1898c14718e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 13 Jun 2005 14:16:38 +0200 Subject: [ALSA] hda-codec - More fix of ALC880 codec support Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 4 + sound/pci/hda/hda_codec.c | 103 +- sound/pci/hda/hda_generic.c | 10 +- sound/pci/hda/hda_intel.c | 2 +- sound/pci/hda/hda_local.h | 33 +- sound/pci/hda/patch_cmedia.c | 236 +-- sound/pci/hda/patch_realtek.c | 1935 ++++++++++++----------- 7 files changed, 1218 insertions(+), 1105 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index ced9a6eac562..104a994b8289 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -638,6 +638,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out w810 3-jack z71v 3-jack (HP shared SPDIF) + asus 3-jack + uniwill 3-jack + F1734 2-jack CMI9880 minimal 3-jack in back @@ -645,6 +648,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. full 6-jack in back, 2-jack in front full_dig 6-jack in back, 2-jack in front, SPDIF I/O allout 5-jack in back, 2-jack in front, SPDIF out + auto auto-config reading BIOS (default) Note 2: If you get click noises on output, try the module option position_fix=1 or 2. position_fix=1 will use the SD_LPIB diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index f62d1d5eb7fa..e2cf02387289 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1520,9 +1520,9 @@ int snd_hda_build_pcms(struct hda_bus *bus) * * If no entries are matching, the function returns a negative value. */ -int snd_hda_check_board_config(struct hda_codec *codec, struct hda_board_config *tbl) +int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_config *tbl) { - struct hda_board_config *c; + const struct hda_board_config *c; if (codec->bus->modelname) { for (c = tbl; c->modelname || c->pci_subvendor; c++) { @@ -1714,6 +1714,105 @@ int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec, struct hda_multi_o return 0; } +/* + * Helper for automatic ping configuration + */ +/* parse all pin widgets and store the useful pin nids to cfg */ +int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg) +{ + hda_nid_t nid, nid_start; + int i, j, nodes; + short seq, sequences[4], assoc_line_out; + + memset(cfg, 0, sizeof(*cfg)); + + memset(sequences, 0, sizeof(sequences)); + assoc_line_out = 0; + + nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start); + for (nid = nid_start; nid < nodes + nid_start; nid++) { + unsigned int wid_caps = snd_hda_param_read(codec, nid, + AC_PAR_AUDIO_WIDGET_CAP); + unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; + unsigned int def_conf; + short assoc, loc; + + /* read all default configuration for pin complex */ + if (wid_type != AC_WID_PIN) + continue; + def_conf = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE) + continue; + loc = get_defcfg_location(def_conf); + switch (get_defcfg_device(def_conf)) { + case AC_JACK_LINE_OUT: + case AC_JACK_SPEAKER: + seq = get_defcfg_sequence(def_conf); + assoc = get_defcfg_association(def_conf); + if (! assoc) + continue; + if (! assoc_line_out) + assoc_line_out = assoc; + else if (assoc_line_out != assoc) + continue; + if (cfg->line_outs >= ARRAY_SIZE(cfg->line_out_pins)) + continue; + cfg->line_out_pins[cfg->line_outs] = nid; + sequences[cfg->line_outs] = seq; + cfg->line_outs++; + break; + case AC_JACK_HP_OUT: + cfg->hp_pin = nid; + break; + case AC_JACK_MIC_IN: + if (loc == AC_JACK_LOC_FRONT) + cfg->input_pins[AUTO_PIN_FRONT_MIC] = nid; + else + cfg->input_pins[AUTO_PIN_MIC] = nid; + break; + case AC_JACK_LINE_IN: + if (loc == AC_JACK_LOC_FRONT) + cfg->input_pins[AUTO_PIN_FRONT_LINE] = nid; + else + cfg->input_pins[AUTO_PIN_LINE] = nid; + break; + case AC_JACK_CD: + cfg->input_pins[AUTO_PIN_CD] = nid; + break; + case AC_JACK_AUX: + cfg->input_pins[AUTO_PIN_AUX] = nid; + break; + case AC_JACK_SPDIF_OUT: + cfg->dig_out_pin = nid; + break; + case AC_JACK_SPDIF_IN: + cfg->dig_in_pin = nid; + break; + } + } + + /* sort by sequence */ + for (i = 0; i < cfg->line_outs; i++) + for (j = i + 1; j < cfg->line_outs; j++) + if (sequences[i] > sequences[j]) { + seq = sequences[i]; + sequences[i] = sequences[j]; + sequences[j] = seq; + nid = cfg->line_out_pins[i]; + cfg->line_out_pins[i] = cfg->line_out_pins[j]; + cfg->line_out_pins[j] = nid; + } + + /* Swap surround and CLFE: the association order is front/CLFE/surr/back */ + if (cfg->line_outs >= 3) { + nid = cfg->line_out_pins[1]; + cfg->line_out_pins[1] = cfg->line_out_pins[2]; + cfg->line_out_pins[2] = nid; + } + + return 0; +} + #ifdef CONFIG_PM /* * power management diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index bfbeff2e0d0c..2d046abb5911 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -68,8 +68,8 @@ struct hda_gspec { /* * retrieve the default device type from the default config value */ -#define get_defcfg_type(node) (((node)->def_cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT) -#define get_defcfg_location(node) (((node)->def_cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT) +#define defcfg_type(node) (((node)->def_cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT) +#define defcfg_location(node) (((node)->def_cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT) /* * destructor @@ -323,7 +323,7 @@ static struct hda_gnode *parse_output_jack(struct hda_codec *codec, if (! (node->pin_caps & AC_PINCAP_OUT)) continue; if (jack_type >= 0) { - if (jack_type != get_defcfg_type(node)) + if (jack_type != defcfg_type(node)) continue; if (node->wid_caps & AC_WCAP_DIGITAL) continue; /* skip SPDIF */ @@ -418,8 +418,8 @@ static int capture_source_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *uc */ static const char *get_input_type(struct hda_gnode *node, unsigned int *pinctl) { - unsigned int location = get_defcfg_location(node); - switch (get_defcfg_type(node)) { + unsigned int location = defcfg_location(node); + switch (defcfg_type(node)) { case AC_JACK_LINE_IN: if ((location & 0x0f) == AC_JACK_LOC_FRONT) return "Front Line"; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index d89849197422..5e0cca36ed57 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1458,7 +1458,7 @@ static struct pci_device_id azx_ids[] = { { 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ESB2 */ { 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ATI SB450 */ { 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* VIA VT8251/VT8237A */ - { 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ULI */ + { 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ALI 5461? */ { 0, } }; MODULE_DEVICE_TABLE(pci, azx_ids); diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index b8fbbc4901d9..810cfd2d9bba 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -130,7 +130,7 @@ struct hda_board_config { unsigned short pci_subdevice; }; -int snd_hda_check_board_config(struct hda_codec *codec, struct hda_board_config *tbl); +int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_config *tbl); int snd_hda_add_new_ctls(struct hda_codec *codec, snd_kcontrol_new_t *knew); /* @@ -158,4 +158,35 @@ struct hda_bus_unsolicited { struct work_struct work; }; +/* + * Helper for automatic ping configuration + */ + +enum { + AUTO_PIN_MIC, + AUTO_PIN_FRONT_MIC, + AUTO_PIN_LINE, + AUTO_PIN_FRONT_LINE, + AUTO_PIN_CD, + AUTO_PIN_AUX, + AUTO_PIN_LAST +}; + +struct auto_pin_cfg { + int line_outs; + hda_nid_t line_out_pins[4]; /* sorted in the order of Front/Surr/CLFE/Side */ + hda_nid_t hp_pin; + hda_nid_t input_pins[AUTO_PIN_LAST]; + hda_nid_t dig_out_pin; + hda_nid_t dig_in_pin; +}; + +#define get_defcfg_connect(cfg) ((cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT) +#define get_defcfg_association(cfg) ((cfg & AC_DEFCFG_DEF_ASSOC) >> AC_DEFCFG_ASSOC_SHIFT) +#define get_defcfg_location(cfg) ((cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT) +#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE) +#define get_defcfg_device(cfg) ((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT) + +int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg); + #endif /* __SOUND_HDA_LOCAL_H */ diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index 087230ca20a5..2d6e3e3d0a38 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -51,6 +51,7 @@ struct cmi_spec { /* playback */ struct hda_multi_out multiout; hda_nid_t dac_nids[4]; /* NID for each DAC */ + int num_dacs; /* capture */ hda_nid_t *adc_nids; @@ -77,6 +78,19 @@ struct cmi_spec { struct hda_verb multi_init[9]; /* 2 verbs for each pin + terminator */ }; +/* amp values */ +#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8)) +#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8)) +#define AMP_OUT_MUTE 0xb080 +#define AMP_OUT_UNMUTE 0xb000 +#define AMP_OUT_ZERO 0xb000 +/* pinctl values */ +#define PIN_IN 0x20 +#define PIN_VREF80 0x24 +#define PIN_VREF50 0x21 +#define PIN_OUT 0x40 +#define PIN_HP 0xc0 + /* * input MUX */ @@ -114,9 +128,9 @@ static int cmi_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucon /* 3-stack / 2 channel */ static struct hda_verb cmi9880_ch2_init[] = { /* set line-in PIN for input */ - { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, + { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* set mic PIN for input, also enable vref */ - { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, + { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* route front PCM (DAC1) to HP */ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 }, {} @@ -125,9 +139,9 @@ static struct hda_verb cmi9880_ch2_init[] = { /* 3-stack / 6 channel */ static struct hda_verb cmi9880_ch6_init[] = { /* set line-in PIN for output */ - { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, + { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* set mic PIN for output */ - { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, + { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* route front PCM (DAC1) to HP */ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 }, {} @@ -136,9 +150,9 @@ static struct hda_verb cmi9880_ch6_init[] = { /* 3-stack+front / 8 channel */ static struct hda_verb cmi9880_ch8_init[] = { /* set line-in PIN for output */ - { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, + { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* set mic PIN for output */ - { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, + { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* route rear-surround PCM (DAC4) to HP */ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x03 }, {} @@ -281,27 +295,27 @@ static hda_nid_t cmi9880_adc_nids[2] = { */ static struct hda_verb cmi9880_basic_init[] = { /* port-D for line out (rear panel) */ - { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* port-E for HP out (front panel) */ - { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* route front PCM to HP */ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 }, /* port-A for surround (rear panel) */ - { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* port-G for CLFE (rear panel) */ - { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, { 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 }, /* port-H for side (rear panel) */ - { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, { 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 }, /* port-C for line-in (rear panel) */ - { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, + { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* port-B for mic-in (rear panel) with vref */ - { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, + { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* port-F for mic-in (front panel) with vref */ - { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, + { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* CD-in */ - { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, + { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* route front mic to ADC1/2 */ { 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 }, { 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 }, @@ -310,27 +324,27 @@ static struct hda_verb cmi9880_basic_init[] = { static struct hda_verb cmi9880_allout_init[] = { /* port-D for line out (rear panel) */ - { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* port-E for HP out (front panel) */ - { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* route front PCM to HP */ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 }, /* port-A for side (rear panel) */ - { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* port-G for CLFE (rear panel) */ - { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, { 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 }, /* port-H for side (rear panel) */ - { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, { 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 }, /* port-C for surround (rear panel) */ - { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* port-B for mic-in (rear panel) with vref */ - { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, + { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* port-F for mic-in (front panel) with vref */ - { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, + { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* CD-in */ - { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, + { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* route front mic to ADC1/2 */ { 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 }, { 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 }, @@ -365,101 +379,9 @@ static int cmi9880_build_controls(struct hda_codec *codec) return 0; } -#define get_defcfg_connect(cfg) ((cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT) -#define get_defcfg_association(cfg) ((cfg & AC_DEFCFG_DEF_ASSOC) >> AC_DEFCFG_ASSOC_SHIFT) -#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE) - -/* get all pin default configuration in def_conf */ -static int cmi9880_get_pin_def_config(struct hda_codec *codec) -{ - struct cmi_spec *spec = codec->spec; - hda_nid_t nid, nid_start; - int i = 0, nodes; - - nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start); - for (nid = nid_start; nid < nodes + nid_start; nid++) { - unsigned int wid_caps = snd_hda_param_read(codec, nid, - AC_PAR_AUDIO_WIDGET_CAP); - unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; - /* read all default configuration for pin complex */ - if (wid_type == AC_WID_PIN) { - spec->pin_nid[i] = nid; - spec->def_conf[i] = - snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); - i++; - } - } - spec->pin_def_confs = i; - return 0; -} - -/* get a pin default configuration of nid in def_conf */ -static unsigned int cmi9880_get_def_config(struct hda_codec *codec, hda_nid_t nid) -{ - struct cmi_spec *spec = codec->spec; - int i = 0; - - while (spec->pin_nid[i] != nid && i < spec->pin_def_confs) - i++; - if (i == spec->pin_def_confs) - return (unsigned int) -1; - else - return spec->def_conf[i]; -} - -/* decide what pins to use for multichannel playback */ -static int cmi9880_get_multich_pins(struct hda_codec *codec) -{ - struct cmi_spec *spec = codec->spec; - int i, j, pins, seq[4]; - int max_channel = 0; - unsigned int def_conf, sequence; - hda_nid_t nid; - - memset(spec->multich_pin, 0, sizeof(spec->multich_pin)); - for (pins = 0, i = 0; i < spec->pin_def_confs && pins < 4; i++) { - def_conf = spec->def_conf[i]; - /* skip pin not connected */ - if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE) - continue; - /* get the sequence if association == 1 */ - /* the other pins have association = 0, incorrect in spec 1.0 */ - if (get_defcfg_association(def_conf) == 1) { - sequence = get_defcfg_sequence(def_conf); - seq[pins] = sequence; - spec->multich_pin[pins] = spec->pin_nid[i]; - pins++; // ready for next slot - max_channel += 2; - } - } - /* sort by sequence, data collected here will be for Windows */ - for (i = 0; i < pins; i++) { - for (j = i + 1; j < pins; j++) { - if (seq[j] < seq[i]) { - sequence = seq[j]; - nid = spec->multich_pin[j]; - seq[j] = seq[i]; - spec->multich_pin[j] = spec->multich_pin[i]; - seq[i] = sequence; - spec->multich_pin[i] = nid; - } - } - } - /* the pin assignment is for front, C/LFE, surround and back */ - if (max_channel >= 6) { - hda_nid_t temp; - /* exchange pin of C/LFE and surround */ - temp = spec->multich_pin[1]; - spec->multich_pin[1] = spec->multich_pin[2]; - spec->multich_pin[2] = temp; - } - return max_channel; -} - /* fill in the multi_dac_nids table, which will decide which audio widget to use for each channel */ -static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec) +static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec, const struct auto_pin_cfg *cfg) { struct cmi_spec *spec = codec->spec; hda_nid_t nid; @@ -470,32 +392,34 @@ static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec) memset(spec->dac_nids, 0, sizeof(spec->dac_nids)); memset(assigned, 0, sizeof(assigned)); /* check the pins we found */ - for (i = 0; i < spec->multiout.max_channels / 2; i++) { - nid = spec->multich_pin[i]; + for (i = 0; i < cfg->line_outs; i++) { + nid = cfg->line_out_pins[i]; /* nid 0x0b~0x0e is hardwired to audio widget 0x3~0x6 */ - if (nid <= 0x0e && nid >= 0x0b) { - spec->dac_nids[i] = nid - 0x08; + if (nid >= 0x0b && nid <= 0x0e) { + spec->dac_nids[i] = (nid - 0x0b) + 0x03; assigned[nid - 0x0b] = 1; } } /* left pin can be connect to any audio widget */ - for (i = 0; i < spec->multiout.max_channels / 2; i++) { - if (!assigned[i]) { - /* search for an empty channel */ - /* I should also check the pin type */ - for (j = 0; j < ARRAY_SIZE(spec->dac_nids); j++) - if (! spec->dac_nids[j]) { - spec->dac_nids[j] = i + 3; - assigned[i] = 1; - break; - } + for (i = 0; i < cfg->line_outs; i++) { + nid = cfg->line_out_pins[i]; + if (nid <= 0x0e) + continue; + /* search for an empty channel */ + for (j = 0; j < cfg->line_outs; j++) { + if (! assigned[j]) { + spec->dac_nids[i] = i + 0x03; + assigned[j] = 1; + break; + } } } + spec->num_dacs = cfg->line_outs; return 0; } /* create multi_init table, which is used for multichannel initialization */ -static int cmi9880_fill_multi_init(struct hda_codec *codec) +static int cmi9880_fill_multi_init(struct hda_codec *codec, const struct auto_pin_cfg *cfg) { struct cmi_spec *spec = codec->spec; hda_nid_t nid; @@ -503,29 +427,26 @@ static int cmi9880_fill_multi_init(struct hda_codec *codec) /* clear the table, only one c-media dac assumed here */ memset(spec->multi_init, 0, sizeof(spec->multi_init)); - for (j = 0, i = 0; i < spec->multiout.max_channels / 2; i++) { + for (j = 0, i = 0; i < cfg->line_outs; i++) { hda_nid_t conn[4]; - nid = spec->multich_pin[i]; + nid = cfg->line_out_pins[i]; /* set as output */ spec->multi_init[j].nid = nid; spec->multi_init[j].verb = AC_VERB_SET_PIN_WIDGET_CONTROL; - spec->multi_init[j].param = 0xc0; + spec->multi_init[j].param = PIN_OUT; j++; - /* nid 0x0f,0x10,0x1f,0x20 are needed to set connection */ - switch (nid) { - case 0x0f: - case 0x10: - case 0x1f: - case 0x20: + if (nid > 0x0e) { /* set connection */ spec->multi_init[j].nid = nid; spec->multi_init[j].verb = AC_VERB_SET_CONNECT_SEL; + spec->multi_init[j].param = 0; /* find the index in connect list */ len = snd_hda_get_connections(codec, nid, conn, 4); for (k = 0; k < len; k++) - if (conn[k] == spec->dac_nids[i]) + if (conn[k] == spec->dac_nids[i]) { + spec->multi_init[j].param = j; break; - spec->multi_init[j].param = k < len ? k : 0; + } j++; break; } @@ -759,6 +680,7 @@ static int patch_cmi9880(struct hda_codec *codec) /* copy default DAC NIDs */ memcpy(spec->dac_nids, cmi9880_dac_nids, sizeof(spec->dac_nids)); + spec->num_dacs = 4; switch (spec->board_config) { case CMI_MINIMAL: @@ -795,18 +717,16 @@ static int patch_cmi9880(struct hda_codec *codec) { unsigned int port_e, port_f, port_g, port_h; unsigned int port_spdifi, port_spdifo; - int max_channels; + struct auto_pin_cfg cfg; + /* collect pin default configuration */ - cmi9880_get_pin_def_config(codec); - port_e = cmi9880_get_def_config(codec, 0x0f); - port_f = cmi9880_get_def_config(codec, 0x10); - port_g = cmi9880_get_def_config(codec, 0x1f); - port_h = cmi9880_get_def_config(codec, 0x20); - port_spdifi = cmi9880_get_def_config(codec, 0x13); - port_spdifo = cmi9880_get_def_config(codec, 0x12); + port_e = snd_hda_codec_read(codec, 0x0f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + port_f = snd_hda_codec_read(codec, 0x10, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); spec->front_panel = 1; if (get_defcfg_connect(port_e) == AC_JACK_PORT_NONE || get_defcfg_connect(port_f) == AC_JACK_PORT_NONE) { + port_g = snd_hda_codec_read(codec, 0x1f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + port_h = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); spec->surr_switch = 1; /* no front panel */ if (get_defcfg_connect(port_g) == AC_JACK_PORT_NONE || @@ -824,24 +744,26 @@ static int patch_cmi9880(struct hda_codec *codec) spec->multiout.max_channels = cmi9880_channel_modes[0].channels; } else { spec->input_mux = &cmi9880_basic_mux; + port_spdifi = snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + port_spdifo = snd_hda_codec_read(codec, 0x12, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); if (get_defcfg_connect(port_spdifo) != AC_JACK_PORT_NONE) spec->multiout.dig_out_nid = CMI_DIG_OUT_NID; if (get_defcfg_connect(port_spdifi) != AC_JACK_PORT_NONE) spec->dig_in_nid = CMI_DIG_IN_NID; spec->multiout.max_channels = 8; } - max_channels = cmi9880_get_multich_pins(codec); - if (max_channels > 0) { - spec->multiout.max_channels = max_channels; - cmi9880_fill_multi_dac_nids(codec); - cmi9880_fill_multi_init(codec); + snd_hda_parse_pin_def_config(codec, &cfg); + if (cfg.line_outs) { + spec->multiout.max_channels = cfg.line_outs * 2; + cmi9880_fill_multi_dac_nids(codec, &cfg); + cmi9880_fill_multi_init(codec, &cfg); } else snd_printd("patch_cmedia: cannot detect association in defcfg\n"); break; } } - spec->multiout.num_dacs = 4; + spec->multiout.num_dacs = spec->num_dacs; spec->multiout.dac_nids = spec->dac_nids; spec->adc_nids = cmi9880_adc_nids; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ce280c006be1..9edd558d6bd3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -39,13 +39,16 @@ enum { ALC880_5ST_DIG, ALC880_W810, ALC880_Z71V, - ALC880_TEST, + ALC880_AUTO, ALC880_6ST_DIG, ALC880_F1734, ALC880_ASUS, ALC880_ASUS_DIG, ALC880_ASUS_W1V, ALC880_UNIWILL_DIG, +#ifdef CONFIG_SND_DEBUG + ALC880_TEST, +#endif ALC880_MODEL_LAST /* last tag */ }; @@ -56,19 +59,28 @@ enum { ALC260_MODEL_LAST /* last tag */ }; +/* amp values */ +#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8)) +#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8)) +#define AMP_OUT_MUTE 0xb080 +#define AMP_OUT_UNMUTE 0xb000 +#define AMP_OUT_ZERO 0xb000 +/* pinctl values */ +#define PIN_IN 0x20 +#define PIN_VREF80 0x24 +#define PIN_VREF50 0x21 +#define PIN_OUT 0x40 +#define PIN_HP 0xc0 + struct alc_spec { /* codec parameterization */ - unsigned int front_panel: 1; /* indicates the board has a front panel; - * not referred currently for any purpose, - * though... - */ - - snd_kcontrol_new_t *mixers[2]; /* mixer arrays */ + snd_kcontrol_new_t *mixers[3]; /* mixer arrays */ unsigned int num_mixers; - struct hda_verb *init_verbs; /* initialization verbs - * don't forget NULL termination! - */ + const struct hda_verb *init_verbs[3]; /* initialization verbs + * don't forget NULL termination! + */ + unsigned int num_init_verbs; char *stream_name_analog; /* analog PCM stream */ struct hda_pcm_stream *stream_analog_playback; @@ -101,96 +113,14 @@ struct alc_spec { struct hda_pcm pcm_rec[2]; /* used in alc_build_pcms() */ struct semaphore bind_mutex; /* for bound controls */ -}; - -/* DAC/ADC assignment */ - -static hda_nid_t alc880_dac_nids[4] = { - /* front, rear, clfe, rear_surr */ - 0x02, 0x05, 0x04, 0x03 -}; - -static hda_nid_t alc880_6st_dac_nids[4] = { - /* front, rear, clfe, rear_surr */ - 0x02, 0x03, 0x04, 0x05 -}; - -static hda_nid_t alc880_w810_dac_nids[3] = { - /* front, rear/surround, clfe */ - 0x02, 0x03, 0x04 -}; - -static hda_nid_t alc880_z71v_dac_nids[1] = { - /* front only? */ - 0x02 -}; - -#if 0 -/* The datasheet says the node 0x07 is connected from inputs, - * but it shows zero connection in the real implementation on some devices. - */ -static hda_nid_t alc880_adc_nids[3] = { - /* ADC0-2 */ - 0x07, 0x08, 0x09, -}; -#else -static hda_nid_t alc880_adc_nids[2] = { - /* ADC1-2 */ - 0x08, 0x09, -}; -#endif - -#define ALC880_DIGOUT_NID 0x06 -#define ALC880_DIGIN_NID 0x0a - -static hda_nid_t alc260_dac_nids[1] = { - /* front */ - 0x02, -}; - -static hda_nid_t alc260_adc_nids[1] = { - /* ADC0 */ - 0x04, -}; -static hda_nid_t alc260_hp_adc_nids[1] = { - /* ADC1 */ - 0x05, -}; - -#define ALC260_DIGOUT_NID 0x03 -#define ALC260_DIGIN_NID 0x06 - -static struct hda_input_mux alc880_capture_source = { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "Front Mic", 0x3 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - }, + /* dynamic controls, init_verbs and input_mux */ + struct auto_pin_cfg autocfg; + unsigned int num_kctl_alloc, num_kctl_used; + snd_kcontrol_new_t *kctl_alloc; + struct hda_input_mux private_imux; }; -//pshou 05/24/05 -static struct hda_input_mux alc880_6stack_capture_source = { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "Front Mic", 0x1 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - }, -}; - -static struct hda_input_mux alc260_capture_source = { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "Front Mic", 0x1 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - }, -}; /* * input MUX handling @@ -221,6 +151,7 @@ static int alc_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucon spec->adc_nids[adc_idx], &spec->cur_mux[adc_idx]); } + /* * channel mode setting */ @@ -229,133 +160,6 @@ struct alc_channel_mode { const struct hda_verb *sequence; }; - -/* - * channel source setting (2/6 channel selection for 3-stack) - */ - -/* - * set the path ways for 2 channel output - * need to set the codec line out and mic 1 pin widgets to inputs - */ -static struct hda_verb alc880_threestack_ch2_init[] = { - /* set pin widget 1Ah (line in) for input */ - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, - /* set pin widget 18h (mic1) for input, for mic also enable the vref */ - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, - /* mute the output for Line In PW */ - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 }, - /* mute for Mic1 PW */ - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 }, - { } /* end */ -}; - -/* - * 6ch mode - * need to set the codec line out and mic 1 pin widgets to outputs - */ -static struct hda_verb alc880_threestack_ch6_init[] = { - /* set pin widget 1Ah (line in) for output */ - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, - /* set pin widget 18h (mic1) for output */ - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, - /* unmute the output for Line In PW */ - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 }, - /* unmute for Mic1 PW */ - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 }, - /* for rear channel output using Line In 1 - * set select widget connection (nid = 0x12) - to summer node - * for rear NID = 0x0f...offset 3 in connection list - */ - { 0x12, AC_VERB_SET_CONNECT_SEL, 0x3 }, - /* for Mic1 - retask for center/lfe */ - /* set select widget connection (nid = 0x10) - to summer node for - * front CLFE NID = 0x0e...offset 2 in connection list - */ - { 0x10, AC_VERB_SET_CONNECT_SEL, 0x2 }, - { } /* end */ -}; - -static struct alc_channel_mode alc880_threestack_modes[2] = { - { 2, alc880_threestack_ch2_init }, - { 6, alc880_threestack_ch6_init }, -}; - - -/* - * channel source setting (6/8 channel selection for 5-stack) - */ - -/* set the path ways for 6 channel output - * need to set the codec line out and mic 1 pin widgets to inputs - */ -static struct hda_verb alc880_fivestack_ch6_init[] = { - /* set pin widget 1Ah (line in) for input */ - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, - /* mute the output for Line In PW */ - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 }, - { } /* end */ -}; - -/* need to set the codec line out and mic 1 pin widgets to outputs */ -static struct hda_verb alc880_fivestack_ch8_init[] = { - /* set pin widget 1Ah (line in) for output */ - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, - /* unmute the output for Line In PW */ - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 }, - /* output for surround channel output using Line In 1 */ - /* set select widget connection (nid = 0x12) - to summer node - * for surr_rear NID = 0x0d...offset 1 in connection list - */ - { 0x12, AC_VERB_SET_CONNECT_SEL, 0x1 }, - { } /* end */ -}; - -static struct alc_channel_mode alc880_fivestack_modes[2] = { - { 6, alc880_fivestack_ch6_init }, - { 8, alc880_fivestack_ch8_init }, -}; - -/* - * channel source setting for W810 system - * - * W810 has rear IO for: - * Front (DAC 02) - * Surround (DAC 03) - * Center/LFE (DAC 04) - * Digital out (06) - * - * The system also has a pair of internal speakers, and a headphone jack. - * These are both connected to Line2 on the codec, hence to DAC 02. - * - * There is a variable resistor to control the speaker or headphone - * volume. This is a hardware-only device without a software API. - * - * Plugging headphones in will disable the internal speakers. This is - * implemented in hardware, not via the driver using jack sense. In - * a similar fashion, plugging into the rear socket marked "front" will - * disable both the speakers and headphones. - * - * For input, there's a microphone jack, and an "audio in" jack. - * These may not do anything useful with this driver yet, because I - * haven't setup any initialization verbs for these yet... - */ - -static struct alc_channel_mode alc880_w810_modes[1] = { - { 6, NULL } -}; - -static struct alc_channel_mode alc880_z71v_modes[1] = { - { 2, NULL } -}; - -//pshou 05/19/05 -static struct alc_channel_mode alc880_sixstack_modes[1] = { - { 8, NULL }, -}; - -/* - */ static int alc880_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); @@ -478,18 +282,79 @@ static int alc_bind_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *u #define ALC_BIND_MUTE(xname,nid,indices,dir) ALC_BIND_MUTE_MONO(xname,nid,3,indices,dir) + /* + * ALC880 3-stack model + * + * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0e) + * Pin assignment: Front = 0x14, Line-In/Surr = 0x1a, Mic/CLFE = 0x18, F-Mic = 0x1b + * HP = 0x19 */ -/* 3-stack mode - * Pin assignment: Front=0x14, Line-In/Rear=0x1a, Mic/CLFE=0x18, F-Mic=0x1b - * HP=0x19 +static hda_nid_t alc880_dac_nids[4] = { + /* front, rear, clfe, rear_surr */ + 0x02, 0x05, 0x04, 0x03 +}; + +static hda_nid_t alc880_adc_nids[3] = { + /* ADC0-2 */ + 0x07, 0x08, 0x09, +}; + +/* The datasheet says the node 0x07 is connected from inputs, + * but it shows zero connection in the real implementation on some devices. */ -static snd_kcontrol_new_t alc880_base_mixer[] = { +static hda_nid_t alc880_adc_nids_alt[2] = { + /* ADC1-2 */ + 0x08, 0x09, +}; + +#define ALC880_DIGOUT_NID 0x06 +#define ALC880_DIGIN_NID 0x0a + +static struct hda_input_mux alc880_capture_source = { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Front Mic", 0x3 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + +/* channel source setting (2/6 channel selection for 3-stack) */ +/* 2ch mode */ +static struct hda_verb alc880_threestack_ch2_init[] = { + /* set line-in to input, mute it */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + /* set mic-in to input vref 80%, mute it */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { } /* end */ +}; + +/* 6ch mode */ +static struct hda_verb alc880_threestack_ch6_init[] = { + /* set line-in to output, unmute it */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + /* set mic-in to output, unmute it */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { } /* end */ +}; + +static struct alc_channel_mode alc880_threestack_modes[2] = { + { 2, alc880_threestack_ch2_init }, + { 6, alc880_threestack_ch6_init }, +}; + +static snd_kcontrol_new_t alc880_three_stack_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Surround Playback Switch", 0x1a, 2, HDA_INPUT), + ALC_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), @@ -504,13 +369,25 @@ static snd_kcontrol_new_t alc880_base_mixer[] = { HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT), HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT), - /* We don't use NID 0x07 - see above */ - HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Channel Mode", + .info = alc880_ch_mode_info, + .get = alc880_ch_mode_get, + .put = alc880_ch_mode_put, + }, + { } /* end */ +}; + +/* capture mixer elements */ +static snd_kcontrol_new_t alc880_capture_mixer[] = { + HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer @@ -519,49 +396,16 @@ static snd_kcontrol_new_t alc880_base_mixer[] = { */ /* .name = "Capture Source", */ .name = "Input Source", - .count = 2, + .count = 3, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Channel Mode", - .info = alc880_ch_mode_info, - .get = alc880_ch_mode_get, - .put = alc880_ch_mode_put, - }, { } /* end */ }; -/* 5-stack mode - * Pin assignment: Front=0x14, Rear=0x17, CLFE=0x16 - * Line-In/Side=0x1a, Mic=0x18, F-Mic=0x1b, HP=0x19 - */ -static snd_kcontrol_new_t alc880_five_stack_mixer[] = { - HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT), - HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), - ALC_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT), - HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), - /* HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), */ - HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT), - /* We don't use NID 0x07 - see above */ +/* capture mixer elements (in case NID 0x07 not available) */ +static snd_kcontrol_new_t alc880_capture_alt_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), @@ -579,80 +423,77 @@ static snd_kcontrol_new_t alc880_five_stack_mixer[] = { .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Channel Mode", - .info = alc880_ch_mode_info, - .get = alc880_ch_mode_get, - .put = alc880_ch_mode_put, - }, { } /* end */ }; -static snd_kcontrol_new_t alc880_w810_base_mixer[] = { - HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Surround Playback Switch", 0x15, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - /* The multiple "Capture Source" controls confuse alsamixer - * So call somewhat different.. - * FIXME: the controls appear in the "playback" view! - */ - /* .name = "Capture Source", */ - .name = "Input Source", - .count = 3, - .info = alc_mux_enum_info, - .get = alc_mux_enum_get, - .put = alc_mux_enum_put, - }, + + +/* + * ALC880 5-stack model + * + * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0d), Side = 0x02 (0xd) + * Pin assignment: Front = 0x14, Surr = 0x17, CLFE = 0x16 + * Line-In/Side = 0x1a, Mic = 0x18, F-Mic = 0x1b, HP = 0x19 + */ + +/* additional mixers to alc880_three_stack_mixer */ +static snd_kcontrol_new_t alc880_five_stack_mixer[] = { + HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + ALC_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT), { } /* end */ }; -static snd_kcontrol_new_t alc880_z71v_mixer[] = { - HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - /* The multiple "Capture Source" controls confuse alsamixer - * So call somewhat different.. - * FIXME: the controls appear in the "playback" view! - */ - /* .name = "Capture Source", */ - .name = "Input Source", - .count = 3, - .info = alc_mux_enum_info, - .get = alc_mux_enum_get, - .put = alc_mux_enum_put, - }, +/* channel source setting (6/8 channel selection for 5-stack) */ +/* 6ch mode */ +static struct hda_verb alc880_fivestack_ch6_init[] = { + /* set line-in to input, mute it */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, { } /* end */ }; -//pshou 05/24/05 +/* 8ch mode */ +static struct hda_verb alc880_fivestack_ch8_init[] = { + /* set line-in to output, unmute it */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { } /* end */ +}; + +static struct alc_channel_mode alc880_fivestack_modes[2] = { + { 6, alc880_fivestack_ch6_init }, + { 8, alc880_fivestack_ch8_init }, +}; + + +/* + * ALC880 6-stack model + * + * DAC: Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e), Side = 0x05 (0x0f) + * Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, Side = 0x17, + * Mic = 0x18, F-Mic = 0x19, Line = 0x1a, HP = 0x1b + */ + +static hda_nid_t alc880_6st_dac_nids[4] = { + /* front, rear, clfe, rear_surr */ + 0x02, 0x03, 0x04, 0x05 +}; + +static struct hda_input_mux alc880_6stack_capture_source = { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Front Mic", 0x1 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + +/* fixed 8-channels */ +static struct alc_channel_mode alc880_sixstack_modes[1] = { + { 8, NULL }, +}; + static snd_kcontrol_new_t alc880_six_stack_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), @@ -674,25 +515,6 @@ static snd_kcontrol_new_t alc880_six_stack_mixer[] = { HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), - /* HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT), */ - HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - /* The multiple "Capture Source" controls confuse alsamixer - * So call somewhat different.. - * FIXME: the controls appear in the "playback" view! - */ - /* .name = "Capture Source", */ - .name = "Input Source", - .count = 2, - .info = alc_mux_enum_info, - .get = alc_mux_enum_get, - .put = alc_mux_enum_put, - }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", @@ -703,36 +525,44 @@ static snd_kcontrol_new_t alc880_six_stack_mixer[] = { { } /* end */ }; -// 03/08/05 Fujitsu -static snd_kcontrol_new_t alc880_2_jack_mixer[] = { - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT), - ALC_BIND_MUTE("Internal Speaker Playback Switch", 0x0d, 2, HDA_INPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - /* The multiple "Capture Source" controls confuse alsamixer - * So call somewhat different.. - * FIXME: the controls appear in the "playback" view! - */ - /* .name = "Capture Source", */ - .name = "Input Source", - .count = 1, - .info = alc_mux_enum_info, - .get = alc_mux_enum_get, - .put = alc_mux_enum_put, - }, - { } /* end */ + +/* + * ALC880 W810 model + * + * W810 has rear IO for: + * Front (DAC 02) + * Surround (DAC 03) + * Center/LFE (DAC 04) + * Digital out (06) + * + * The system also has a pair of internal speakers, and a headphone jack. + * These are both connected to Line2 on the codec, hence to DAC 02. + * + * There is a variable resistor to control the speaker or headphone + * volume. This is a hardware-only device without a software API. + * + * Plugging headphones in will disable the internal speakers. This is + * implemented in hardware, not via the driver using jack sense. In + * a similar fashion, plugging into the rear socket marked "front" will + * disable both the speakers and headphones. + * + * For input, there's a microphone jack, and an "audio in" jack. + * These may not do anything useful with this driver yet, because I + * haven't setup any initialization verbs for these yet... + */ + +static hda_nid_t alc880_w810_dac_nids[3] = { + /* front, rear/surround, clfe */ + 0x02, 0x03, 0x04 }; -//pshou 04/24/05 -static snd_kcontrol_new_t alc880_asus_mixer[] = { +/* fixed 6 channels */ +static struct alc_channel_mode alc880_w810_modes[1] = { + { 6, NULL } +}; + +/* Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, HP = 0x1b */ +static snd_kcontrol_new_t alc880_w810_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), @@ -741,41 +571,80 @@ static snd_kcontrol_new_t alc880_asus_mixer[] = { HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), ALC_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), + { } /* end */ +}; + + +/* + * Z710V model + * + * DAC: Front = 0x02 (0x0c), HP = 0x03 (0x0d) + * Pin assignment: Front = 0x14, HP = 0x15, Mic = 0x18, Mic2 = 0x19(?), Line = 0x1a + */ + +static hda_nid_t alc880_z71v_dac_nids[1] = { + 0x02 +}; +#define ALC880_Z71V_HP_DAC 0x03 + +/* fixed 2 channels */ +static struct alc_channel_mode alc880_2_jack_modes[1] = { + { 2, NULL } +}; + +static snd_kcontrol_new_t alc880_z71v_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - /* The multiple "Capture Source" controls confuse alsamixer - * So call somewhat different.. - * FIXME: the controls appear in the "playback" view! - */ - /* .name = "Capture Source", */ - .name = "Input Source", - .count = 2, - .info = alc_mux_enum_info, - .get = alc_mux_enum_get, - .put = alc_mux_enum_put, - }, - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Channel Mode", - .info = alc880_ch_mode_info, - .get = alc880_ch_mode_get, - .put = alc880_ch_mode_put, - }, { } /* end */ }; -// pshou 05/03/05 -static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = { + +/* FIXME! */ +/* + * ALC880 F1734 model + * + * DAC: HP = 0x02 (0x0c), Front = 0x03 (0x0d) + * Pin assignment: HP = 0x14, Front = 0x15, Mic = 0x18 + */ + +static hda_nid_t alc880_f1734_dac_nids[1] = { + 0x03 +}; +#define ALC880_F1734_HP_DAC 0x02 + +static snd_kcontrol_new_t alc880_f1734_mixer[] = { + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + ALC_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + ALC_BIND_MUTE("Internal Speaker Playback Switch", 0x0d, 2, HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + { } /* end */ +}; + + +/* FIXME! */ +/* + * ALC880 ASUS model + * + * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e) + * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16, + * Mic = 0x18, Line = 0x1a + */ + +#define alc880_asus_dac_nids alc880_w810_dac_nids /* identical with w810 */ +#define alc880_asus_modes alc880_threestack_modes /* 2/6 channel mode */ + +static snd_kcontrol_new_t alc880_asus_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), @@ -788,27 +657,8 @@ static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = { HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), - HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - /* The multiple "Capture Source" controls confuse alsamixer - * So call somewhat different.. - * FIXME: the controls appear in the "playback" view! - */ - /* .name = "Capture Source", */ - .name = "Input Source", - .count = 2, - .info = alc_mux_enum_info, - .get = alc_mux_enum_get, - .put = alc_mux_enum_put, - }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", @@ -818,7 +668,26 @@ static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = { }, { } /* end */ }; + +/* FIXME! */ +/* + * ALC880 ASUS W1V model + * + * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e) + * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16, + * Mic = 0x18, Line = 0x1a, Line2 = 0x1b + */ + +/* additional mixers to alc880_asus_mixer */ +static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = { + HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT), + HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT), + { } /* end */ +}; + + /* + * build control elements */ static int alc_build_controls(struct hda_codec *codec) { @@ -845,453 +714,297 @@ static int alc_build_controls(struct hda_codec *codec) return 0; } + /* * initialize the codec volumes, etc */ -#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8)) -#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8)) -#define AMP_OUT_MUTE 0xb080 -#define AMP_OUT_UNMUTE 0xb000 -#define AMP_OUT_ZERO 0xb000 -#define PIN_IN 0x20 -#define PIN_VREF80 0x24 -#define PIN_VREF50 0x21 -#define PIN_OUT 0x40 -#define PIN_HP 0xc0 - -static struct hda_verb alc880_init_verbs_three_stack[] = { - /* Set pin widgets for output */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* Line In pin widget for input */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* CD pin widget for input */ - {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Mic1 (rear panel) pin widget for input and vref at 80% */ - {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* Mic2 (front panel) pin widget for input and vref at 80% */ - {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* unmute capture amp left and right */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ +/* + * generic initialization of ADC, input mixers and output mixers + */ +static struct hda_verb alc880_volume_init_verbs[] = { + /* + * Unmute ADC0-2 and set the default input to mic-in + */ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* unmute capture1 amp left and right */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* unmute capture2 amp left and right */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* set vol=0 front mixer amp */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute front-out pin widget amp (no gain on this amp) */ - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* set vol=0 rear mixer amp */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* mute line-in pin widget amp left and right (no gain on this amp) */ - {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - /* set vol=0 clfe mixer amp */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* mute mic pin widget amp left and right (no gain on this amp) */ - {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - - /* using rear surround as the path for headphone output */ - /* set vol=0 rear surround mixer amp */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* PASD 3 stack boards use the Mic 2 as the headphone output */ - /* need to program the selector associated with the Mic 2 pin widget to - * surround path (index 0x01) for headphone output */ - {0x11, AC_VERB_SET_CONNECT_SEL, 0x01}, - /* unmute pin widget amp left and right (no gain on this amp) */ - {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* need to retask the Mic 2 pin widget to output */ - {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer widget(nid=0x0B) - * to support the input path of analog loopback + /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback + * mixer widget * Note: PASD motherboards uses the Line In 2 as the input for front panel * mic (mic 2) */ - /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */ - /* mute CD */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - /* unmute Line In */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - /* mute Mic 1 */ + /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* mute Line In 2 (for PASD boards Mic 2) */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - /* Unmute input amps for the line out paths to support the output path of - * analog loopback - * the mixers on the output path has 2 inputs, one from the DAC and one - * from the mixer + /* + * Set up output mixers (0x0c - 0x0f) */ - /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ - /* Unmute Front out path */ + /* set vol=0 to output mixers */ + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + /* set up input amps for analog loopback */ + /* Amp Indices: DAC = 0, mixer = 1 */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute Surround (used as HP) out path */ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute C/LFE out path */ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute rear Surround out path */ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, { } }; -static struct hda_verb alc880_init_verbs_five_stack[] = { - /* Set pin widgets for output */ +/* + * 3-stack pin configuration: + * front = 0x14, mic/clfe = 0x18, HP = 0x19, line/surr = 0x1a, f-mic = 0x1b + */ +static struct hda_verb alc880_pin_3stack_init_verbs[] = { + /* + * preset connection lists of input pins + * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround + */ + {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */ + {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ + {0x12, AC_VERB_SET_CONNECT_SEL, 0x03}, /* line/surround */ + + /* + * Set pin mode and muting + */ + /* set front pin widgets 0x14 for output */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Mic1 (rear panel) pin widget for input and vref at 80% */ + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Mic2 (as headphone out) for HP output */ + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line In pin widget for input */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Line2 (as front mic) pin widget for input and vref at 80% */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* CD pin widget for input */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Mic1 (rear panel) pin widget for input and vref at 80% */ - {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* Mic2 (front panel) pin widget for input and vref at 80% */ - {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* mute capture amp left and right */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ - {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* mute amp1 left and right */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ - {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* mute amp left and right */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ - {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* set vol=0 front mixer amp */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute front-out pin widget amp (no gain on this amp) */ - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* set vol=0 rear mixer amp */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute rear-out pin widget (no gain on this amp) */ - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* set vol=0 clfe mixer amp */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute clfe-pin widget amp (no gain on this amp) */ - {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* using rear surround as the path for headphone output */ - /* set vol=0 rear surround mixer amp */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* PASD 3 stack boards use the Mic 2 as the headphone output */ - /* need to program the selector associated with the Mic 2 pin widget to - * surround path (index 0x01) for headphone output - */ - {0x11, AC_VERB_SET_CONNECT_SEL, 0x01}, - /* mute pin widget amp left and right (no gain on this amp) */ - {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* need to retask the Mic 2 pin widget to output */ - {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, + { } +}; - /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer - * widget(nid=0x0B) to support the input path of analog loopback +/* + * 5-stack pin configuration: + * front = 0x14, surround = 0x17, clfe = 0x16, mic = 0x18, HP = 0x19, + * line-in/side = 0x1a, f-mic = 0x1b + */ +static struct hda_verb alc880_pin_5stack_init_verbs[] = { + /* + * preset connection lists of input pins + * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround */ - /* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */ - /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/ - /* unmute CD */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - /* unmute Line In */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - /* unmute Mic 1 */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* unmute Line In 2 (for PASD boards Mic 2) */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, + {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ + {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/side */ - /* Unmute input amps for the line out paths to support the output path of - * analog loopback - * the mixers on the output path has 2 inputs, one from the DAC and - * one from the mixer + /* + * Set pin mode and muting */ - /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ - /* Unmute Front out path */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute Surround (used as HP) out path */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute C/LFE out path */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute rear Surround out path */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + /* set pin widgets 0x14-0x17 for output */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* unmute pins for output (no gain on this amp) */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + + /* Mic1 (rear panel) pin widget for input and vref at 80% */ + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Mic2 (as headphone out) for HP output */ + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Line In pin widget for input */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Line2 (as front mic) pin widget for input and vref at 80% */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* CD pin widget for input */ + {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } }; -static struct hda_verb alc880_w810_init_verbs[] = { - /* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* front channel selector/amp: input 1: capture mix: muted, (no volume selection) */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - - /* front channel selector/amp: output 0: unmuted, max volume */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - - /* front out pin: muted, (no volume selection) */ - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, +/* + * W810 pin configuration: + * front = 0x14, surround = 0x15, clfe = 0x16, HP = 0x1b + */ +static struct hda_verb alc880_pin_w810_init_verbs[] = { + /* hphone/speaker input selector: front DAC */ + {0x13, AC_VERB_SET_CONNECT_SEL, 0x0}, - /* front out pin: NOT headphone enable, out enable, vref disabled */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - - - /* surround channel selector/amp: input 0: DAC: unmuted, (no volume selection) */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* surround channel selector/amp: input 1: capture mix: muted, (no volume selection) */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - - /* surround channel selector/amp: output 0: unmuted, max volume */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - - /* surround out pin: muted, (no volume selection) */ - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - - /* surround out pin: NOT headphone enable, out enable, vref disabled */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - - - /* c/lfe channel selector/amp: input 0: DAC: unmuted, (no volume selection) */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* c/lfe channel selector/amp: input 1: capture mix: muted, (no volume selection) */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - - /* c/lfe channel selector/amp: output 0: unmuted, max volume */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - - /* c/lfe out pin: muted, (no volume selection) */ - {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - - /* c/lfe out pin: NOT headphone enable, out enable, vref disabled */ + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - - /* hphone/speaker input selector: front DAC */ - {0x13, AC_VERB_SET_CONNECT_SEL, 0x0}, - - /* hphone/speaker out pin: muted, (no volume selection) */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - /* hphone/speaker out pin: NOT headphone enable, out enable, vref disabled */ - {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - - { } }; -static struct hda_verb alc880_z71v_init_verbs[] = { - /* front channel selector/amp: muted, DAC and mix (no vol) */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* front channel selector/amp: output 0: vol=0 */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* front out pin: unmuted, (no volume selection) */ - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* front out pin: NOT headphone enable, out enable, vref disabled */ +/* + * Z71V pin configuration: + * Speaker-out = 0x14, HP = 0x15, Mic = 0x18, Line-in = 0x1a, Mic2 = 0x1b (?) + */ +static struct hda_verb alc880_pin_z71v_init_verbs[] = { {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* headphone channel selector/amp: muted, DAC and mix (no vol) */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* headphone channel selector/amp: output 0: vol=0 */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* headphone out pin: muted, (no volume selection) */ - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* headpohne out pin: headphone enable, out enable, vref disabled */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Line In pin widget for input */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* CD pin widget for input */ - {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Mic1 (rear panel) pin widget for input and vref at 80% */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* Mic2 (front panel) pin widget for input and vref at 80% */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* unmute amp left and right */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ - {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* unmute amp left and right */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ - {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* unmute amp left and right */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to mic in */ - {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer - * widget(nid=0x0B) to support the input path of analog loopback - */ - /* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */ - /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/ - /* unmute CD */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - /* unmute Line In */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - /* unmute Mic 1 */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* unmute Line In 2 (for PASD boards Mic 2) */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, + {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } }; -//pshou 05/24/05 -static struct hda_verb alc880_six_stack_init_verbs[] = { +/* + * 6-stack pin configuration: + * front = 0x14, surr = 0x15, clfe = 0x16, side = 0x17, mic = 0x18, f-mic = 0x19, + * line = 0x1a, HP = 0x1b + */ +static struct hda_verb alc880_pin_6stack_init_verbs[] = { + {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + { } +}; + +/* FIXME! */ +/* + * F1734 pin configuration: + * HP = 0x14, speaker-out = 0x15, mic = 0x18 + */ +static struct hda_verb alc880_pin_f1734_init_verbs[] = { {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* unmute amp left and right */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x07, AC_VERB_SET_CONNECT_SEL, 0x02}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - - /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer - * widget(nid=0x0B) to support the input path of analog loopback - */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - /* unmute Line In */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - /* unmute Mic 1 */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* unmute Mic 2 */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - - /* Unmute Front out path */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute Surround (used as HP) out path */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute C/LFE out path */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mute */ - /* Unmute rear Surround out path */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - - { } -}; -static struct hda_verb alc880_2_jack_init_verbs[] = { - /* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x07, AC_VERB_SET_CONNECT_SEL, 0x02}, - {0x0C, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x1B, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, - {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, - {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, { } }; -static struct hda_verb alc880_asus_init_verbs[] = { +/* FIXME! */ +/* + * ASUS pin configuration: + * HP/front = 0x14, surr = 0x15, clfe = 0x16, mic = 0x18, line = 0x1a + */ +static struct hda_verb alc880_pin_asus_init_verbs[] = { {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, - {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */ - /* unmute CD */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - /* unmute Line In */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - /* unmute Mic 1 */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* unmute Line In 2 (for PASD boards Mic 2) */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + { } +}; - /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ - /* Unmute Front out path */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute Surround (used as HP) out path */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute C/LFE out path */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, +/* Enable GPIO mask and set output */ +static struct hda_verb alc880_gpio1_init_verbs[] = { + {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, +}; - { } +/* Enable GPIO mask and set output */ +static struct hda_verb alc880_gpio2_init_verbs[] = { + {0x01, AC_VERB_SET_GPIO_MASK, 0x02}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x02}, }; +/* + */ + static int alc_init(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - snd_hda_sequence_write(codec, spec->init_verbs); + unsigned int i; + + for (i = 0; i < spec->num_init_verbs; i++) + snd_hda_sequence_write(codec, spec->init_verbs[i]); return 0; } @@ -1305,9 +1018,8 @@ static int alc_resume(struct hda_codec *codec) int i; alc_init(codec); - for (i = 0; i < spec->num_mixers; i++) { + for (i = 0; i < spec->num_mixers; i++) snd_hda_resume_ctls(codec, spec->mixers[i]); - } if (spec->multiout.dig_out_nid) snd_hda_resume_spdif_out(codec); if (spec->dig_in_nid) @@ -1399,7 +1111,7 @@ static struct hda_pcm_stream alc880_pcm_analog_playback = { .substreams = 1, .channels_min = 2, .channels_max = 8, - .nid = 0x02, /* NID to query formats and rates */ + /* NID is set in alc_build_pcms */ .ops = { .open = alc880_playback_pcm_open, .prepare = alc880_playback_pcm_prepare, @@ -1411,9 +1123,7 @@ static struct hda_pcm_stream alc880_pcm_analog_capture = { .substreams = 2, .channels_min = 2, .channels_max = 2, - .nid = 0x08, /* NID to query formats and rates - * (0x07 might be broken on some devices) - */ + /* NID is set in alc_build_pcms */ .ops = { .prepare = alc880_capture_pcm_prepare, .cleanup = alc880_capture_pcm_cleanup @@ -1449,7 +1159,9 @@ static int alc_build_pcms(struct hda_codec *codec) info->name = spec->stream_name_analog; info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback); + info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0]; info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture); + info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0]; info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0; for (i = 0; i < spec->num_channel_mode; i++) { @@ -1477,7 +1189,18 @@ static int alc_build_pcms(struct hda_codec *codec) static void alc_free(struct hda_codec *codec) { - kfree(codec->spec); + struct alc_spec *spec = codec->spec; + unsigned int i; + + if (! spec) + return; + + if (spec->kctl_alloc) { + for (i = 0; i < spec->num_kctl_used; i++) + kfree(spec->kctl_alloc[i].name); + kfree(spec->kctl_alloc); + } + kfree(spec); } /* @@ -1840,7 +1563,7 @@ static struct hda_board_config alc880_cfg_tbl[] = { { .pci_subvendor = 0x1462, .pci_subdevice = 0x1150, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0xe803, .pci_subdevice = 0x1019, .config = ALC880_6ST_DIG }, - { .modelname = "asua", .config = ALC880_ASUS }, + { .modelname = "asus", .config = ALC880_ASUS }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1973, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x19b3, .config = ALC880_ASUS_DIG }, @@ -1869,10 +1592,8 @@ static struct hda_board_config alc880_cfg_tbl[] = { * configuration template - to be copied to the spec instance */ struct alc_config_preset { - snd_kcontrol_new_t *mixers; - unsigned int front_panel: 1; /* optional */ - unsigned int gpio_payload; /* optional */ - struct hda_verb *init_verbs; + snd_kcontrol_new_t *mixers[4]; + const struct hda_verb *init_verbs[4]; unsigned int num_dacs; hda_nid_t *dac_nids; hda_nid_t dig_out_nid; /* optional */ @@ -1886,174 +1607,134 @@ struct alc_config_preset { static struct alc_config_preset alc880_presets[] = { [ALC880_3ST] = { - .mixers = alc880_base_mixer, - .init_verbs = alc880_init_verbs_three_stack, + .mixers = { alc880_three_stack_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), - .front_panel = 1, .dac_nids = alc880_dac_nids, - .hp_nid = 0x03, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), .channel_mode = alc880_threestack_modes, .input_mux = &alc880_capture_source, }, [ALC880_3ST_DIG] = { - .mixers = alc880_base_mixer, - .init_verbs = alc880_init_verbs_three_stack, + .mixers = { alc880_three_stack_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), - .front_panel = 1, .dac_nids = alc880_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, - .hp_nid = 0x03, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), .channel_mode = alc880_threestack_modes, .input_mux = &alc880_capture_source, }, [ALC880_5ST] = { - .mixers = alc880_five_stack_mixer, - .init_verbs = alc880_init_verbs_five_stack, - .front_panel = 1, + .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer}, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), .dac_nids = alc880_dac_nids, - .hp_nid = 0x03, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, .num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes), .channel_mode = alc880_fivestack_modes, .input_mux = &alc880_capture_source, }, [ALC880_5ST_DIG] = { - .mixers = alc880_five_stack_mixer, - .init_verbs = alc880_init_verbs_five_stack, - .front_panel = 1, + .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), .dac_nids = alc880_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, - .hp_nid = 0x03, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, .num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes), .channel_mode = alc880_fivestack_modes, .input_mux = &alc880_capture_source, }, [ALC880_6ST_DIG] = { - .mixers = alc880_six_stack_mixer, - .init_verbs = alc880_six_stack_init_verbs, - .front_panel = 1, + .mixers = { alc880_six_stack_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_6st_dac_nids), .dac_nids = alc880_6st_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, .num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes), .channel_mode = alc880_sixstack_modes, .input_mux = &alc880_6stack_capture_source, }, [ALC880_W810] = { - .mixers = alc880_w810_base_mixer, - .init_verbs = alc880_w810_init_verbs, - .gpio_payload = 0x2, + .mixers = { alc880_w810_base_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_w810_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids), .dac_nids = alc880_w810_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, - // No dedicated headphone socket - it's shared with built-in speakers. - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, .num_channel_mode = ARRAY_SIZE(alc880_w810_modes), .channel_mode = alc880_w810_modes, .input_mux = &alc880_capture_source, }, [ALC880_Z71V] = { - .mixers = alc880_z71v_mixer, - .init_verbs = alc880_z71v_init_verbs, + .mixers = { alc880_z71v_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_z71v_init_verbs, + alc880_gpio2_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids), .dac_nids = alc880_z71v_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .hp_nid = 0x03, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc880_z71v_modes), - .channel_mode = alc880_z71v_modes, + .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes), + .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_capture_source, }, [ALC880_F1734] = { - .mixers = alc880_2_jack_mixer, - .init_verbs = alc880_2_jack_init_verbs, - .num_dacs = ARRAY_SIZE(alc880_dac_nids), - .dac_nids = alc880_dac_nids, - .hp_nid = 0x03, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc880_z71v_modes), - .channel_mode = alc880_z71v_modes, + .mixers = { alc880_f1734_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_f1734_init_verbs }, + .num_dacs = ARRAY_SIZE(alc880_f1734_dac_nids), + .dac_nids = alc880_f1734_dac_nids, + .hp_nid = 0x02, + .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes), + .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_capture_source, }, [ALC880_ASUS] = { - .mixers = alc880_asus_mixer, - .init_verbs = alc880_asus_init_verbs, - .gpio_payload = 0x1, - .front_panel = 1, - .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids), - .dac_nids = alc880_w810_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), - .channel_mode = alc880_threestack_modes, + .mixers = { alc880_asus_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs, + alc880_gpio1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), + .dac_nids = alc880_asus_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), + .channel_mode = alc880_asus_modes, .input_mux = &alc880_capture_source, }, [ALC880_ASUS_DIG] = { - .mixers = alc880_asus_mixer, - .init_verbs = alc880_asus_init_verbs, - .gpio_payload = 0x1, - .front_panel = 1, - .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids), - .dac_nids = alc880_w810_dac_nids, + .mixers = { alc880_asus_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs, + alc880_gpio1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), + .dac_nids = alc880_asus_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), - .channel_mode = alc880_threestack_modes, + .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), + .channel_mode = alc880_asus_modes, .input_mux = &alc880_capture_source, }, [ALC880_ASUS_W1V] = { - .mixers = alc880_asus_w1v_mixer, - .init_verbs = alc880_asus_init_verbs, - .gpio_payload = 0x1, - .front_panel = 1, - .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids), - .dac_nids = alc880_w810_dac_nids, + .mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs, + alc880_gpio1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), + .dac_nids = alc880_asus_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), - .channel_mode = alc880_threestack_modes, + .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), + .channel_mode = alc880_asus_modes, .input_mux = &alc880_capture_source, }, [ALC880_UNIWILL_DIG] = { - .mixers = alc880_asus_mixer, - .init_verbs = alc880_asus_init_verbs, - .num_dacs = ARRAY_SIZE(alc880_dac_nids), - .dac_nids = alc880_dac_nids, + .mixers = { alc880_asus_mixer }, + .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs }, + .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), + .dac_nids = alc880_asus_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, - .hp_nid = 0x03, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), - .channel_mode = alc880_threestack_modes, + .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), + .channel_mode = alc880_asus_modes, .input_mux = &alc880_capture_source, }, #ifdef CONFIG_SND_DEBUG [ALC880_TEST] = { - .mixers = alc880_test_mixer, - .init_verbs = alc880_test_init_verbs, + .mixers = { alc880_test_mixer }, + .init_verbs = { alc880_test_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_test_dac_nids), .dac_nids = alc880_test_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, - .num_adc_nids = ARRAY_SIZE(alc880_adc_nids), - .adc_nids = alc880_adc_nids, .num_channel_mode = ARRAY_SIZE(alc880_test_modes), .channel_mode = alc880_test_modes, .input_mux = &alc880_test_capture_source, @@ -2061,11 +1742,333 @@ static struct alc_config_preset alc880_presets[] = { #endif }; +/* + * Automatic parse of I/O pins from the BIOS configuration + */ + +#define NUM_CONTROL_ALLOC 32 +#define NUM_VERB_ALLOC 32 + +enum { + ALC_CTL_WIDGET_VOL, + ALC_CTL_WIDGET_MUTE, + ALC_CTL_BIND_MUTE, +}; +static snd_kcontrol_new_t alc880_control_templates[] = { + HDA_CODEC_VOLUME(NULL, 0, 0, 0), + HDA_CODEC_MUTE(NULL, 0, 0, 0), + ALC_BIND_MUTE(NULL, 0, 0, 0), +}; + +/* add dynamic controls */ +static int add_control(struct alc_spec *spec, int type, const char *name, unsigned long val) +{ + snd_kcontrol_new_t *knew; + + if (spec->num_kctl_used >= spec->num_kctl_alloc) { + int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC; + + knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */ + if (! knew) + return -ENOMEM; + if (spec->kctl_alloc) { + memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc); + kfree(spec->kctl_alloc); + } + spec->kctl_alloc = knew; + spec->num_kctl_alloc = num; + } + + knew = &spec->kctl_alloc[spec->num_kctl_used]; + *knew = alc880_control_templates[type]; + knew->name = snd_kmalloc_strdup(name, GFP_KERNEL); + if (! knew->name) + return -ENOMEM; + knew->private_value = val; + spec->num_kctl_used++; + return 0; +} + +#define alc880_is_fixed_pin(nid) ((nid) >= 0x14 && (nid) <= 0x17) +#define alc880_fixed_pin_idx(nid) ((nid) - 0x14) +#define alc880_is_multi_pin(nid) ((nid) >= 0x18) +#define alc880_multi_pin_idx(nid) ((nid) - 0x18) +#define alc880_is_input_pin(nid) ((nid) >= 0x18) +#define alc880_input_pin_idx(nid) ((nid) - 0x18) +#define alc880_idx_to_dac(nid) ((nid) + 0x02) +#define alc880_dac_to_idx(nid) ((nid) - 0x02) +#define alc880_idx_to_mixer(nid) ((nid) + 0x0c) +#define alc880_idx_to_selector(nid) ((nid) + 0x10) +#define ALC880_PIN_CD_NID 0x1c + +/* fill in the dac_nids table from the parsed pin configuration */ +static int alc880_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg) +{ + hda_nid_t nid; + int assigned[4]; + int i, j; + + memset(assigned, 0, sizeof(assigned)); + + /* check the pins hardwired to audio widget */ + for (i = 0; i < cfg->line_outs; i++) { + nid = cfg->line_out_pins[i]; + if (alc880_is_fixed_pin(nid)) { + int idx = alc880_fixed_pin_idx(nid); + spec->multiout.dac_nids[i] = alc880_dac_to_idx(idx); + assigned[idx] = 1; + } + } + /* left pins can be connect to any audio widget */ + for (i = 0; i < cfg->line_outs; i++) { + nid = cfg->line_out_pins[i]; + if (alc880_is_fixed_pin(nid)) + continue; + /* search for an empty channel */ + for (j = 0; j < cfg->line_outs; j++) { + if (! assigned[j]) { + spec->multiout.dac_nids[i] = alc880_idx_to_dac(j); + assigned[j] = 1; + break; + } + } + } + spec->multiout.num_dacs = cfg->line_outs; + return 0; +} + +/* add playback controls from the parsed DAC table */ +static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) +{ + char name[32]; + static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" }; + hda_nid_t nid; + int i, err; + + for (i = 0; i < cfg->line_outs; i++) { + if (! spec->multiout.dac_nids[i]) + continue; + nid = alc880_idx_to_mixer(alc880_dac_to_idx(spec->multiout.dac_nids[i])); + if (i == 2) { + /* Center/LFE */ + if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Center Playback Volume", + HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0) + return err; + if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "LFE Playback Volume", + HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0) + return err; + if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch", + HDA_COMPOSE_AMP_VAL(nid, 1, 2, HDA_INPUT))) < 0) + return err; + if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch", + HDA_COMPOSE_AMP_VAL(nid, 2, 2, HDA_INPUT))) < 0) + return err; + } else { + sprintf(name, "%s Playback Volume", chname[i]); + if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, + HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) + return err; + sprintf(name, "%s Playback Switch", chname[i]); + if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name, + HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0) + return err; + } + } + + return 0; +} + +/* add playback controls for HP output */ +static int alc880_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin) +{ + hda_nid_t nid; + int err; + + if (! pin) + return 0; + + if (alc880_is_fixed_pin(pin)) { + nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin)); + if (! spec->multiout.dac_nids[0]) { + /* use this as the primary output */ + spec->multiout.dac_nids[0] = nid; + if (! spec->multiout.num_dacs) + spec->multiout.num_dacs = 1; + } else + /* specify the DAC as the extra HP output */ + spec->multiout.hp_nid = nid; + /* control HP volume/switch on the output mixer amp */ + nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin)); + if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume", + HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) + return err; + if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Headphone Playback Switch", + HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0) + return err; + } else if (alc880_is_multi_pin(pin)) { + /* set manual connection */ + if (! spec->multiout.dac_nids[0]) { + /* use this as the primary output */ + spec->multiout.dac_nids[0] = alc880_idx_to_dac(alc880_multi_pin_idx(pin)); + if (! spec->multiout.num_dacs) + spec->multiout.num_dacs = 1; + } + /* we have only a switch on HP-out PIN */ + if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch", + HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT))) < 0) + return err; + } + return 0; +} + +/* create input playback/capture controls for the given pin */ +static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname) +{ + char name[32]; + int err, idx; + + sprintf(name, "%s Playback Volume", ctlname); + idx = alc880_input_pin_idx(pin); + if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, + HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0) + return err; + sprintf(name, "%s Playback Switch", ctlname); + if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, + HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0) + return err; + return 0; +} + +/* create playback/capture controls for input pins */ +static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) +{ + static char *labels[AUTO_PIN_LAST] = { + "Mic", "Front Mic", "Line", "Front Line", "CD", "Aux" + }; + struct hda_input_mux *imux = &spec->private_imux; + int i, err; + + for (i = 0; i < AUTO_PIN_LAST; i++) { + if (alc880_is_input_pin(cfg->input_pins[i])) { + err = new_analog_input(spec, cfg->input_pins[i], labels[i]); + if (err < 0) + return err; + imux->items[imux->num_items].label = labels[i]; + imux->items[imux->num_items].index = alc880_input_pin_idx(cfg->input_pins[i]); + imux->num_items++; + } + } + return 0; +} + +static void alc880_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, + int dac_idx) +{ + /* set as output */ + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type); + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); + /* need the manual connection? */ + if (alc880_is_multi_pin(nid)) { + struct alc_spec *spec = codec->spec; + int idx = alc880_multi_pin_idx(nid); + snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0, + AC_VERB_SET_CONNECT_SEL, + alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx])); + } +} + +static void alc880_auto_init_multi_out(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + int i; + + for (i = 0; i < spec->autocfg.line_outs; i++) { + hda_nid_t nid = spec->autocfg.line_out_pins[i]; + alc880_auto_set_output_and_unmute(codec, nid, PIN_OUT, i); + } +} + +static void alc880_auto_init_hp_out(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + hda_nid_t pin; + + pin = spec->autocfg.hp_pin; + if (pin) /* connect to front */ + alc880_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); +} + +static void alc880_auto_init_analog_input(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + int i; + + for (i = 0; i < AUTO_PIN_LAST; i++) { + hda_nid_t nid = spec->autocfg.input_pins[i]; + if (alc880_is_input_pin(nid)) { + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, + i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN); + if (nid != ALC880_PIN_CD_NID) + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, + AMP_OUT_MUTE); + } + } +} + +/* parse the BIOS configuration and set up the alc_spec */ +/* return 1 if successful, 0 if the proper config is not found, or a negative error code */ +static int alc880_parse_auto_config(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + int err; + + if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0) + return err; + if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0) + return err; + if (! spec->autocfg.line_outs && ! spec->autocfg.hp_pin) + return 0; /* can't find valid BIOS pin config */ + if ((err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 || + (err = alc880_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 || + (err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0) + return err; + + spec->multiout.max_channels = spec->multiout.num_dacs * 2; + + if (spec->autocfg.dig_out_pin) + spec->multiout.dig_out_nid = ALC880_DIGOUT_NID; + if (spec->autocfg.dig_in_pin) + spec->dig_in_nid = ALC880_DIGIN_NID; + + if (spec->kctl_alloc) + spec->mixers[spec->num_mixers++] = spec->kctl_alloc; + + spec->init_verbs[spec->num_init_verbs++] = alc880_volume_init_verbs; + + spec->input_mux = &spec->private_imux; + + return 1; +} + +/* init callback for auto-configuration model -- overriding the default init */ +static int alc880_auto_init(struct hda_codec *codec) +{ + alc_init(codec); + alc880_auto_init_multi_out(codec); + alc880_auto_init_hp_out(codec); + alc880_auto_init_analog_input(codec); + return 0; +} + +/* + * OK, here we have finally the patch for ALC880 + */ + static int patch_alc880(struct hda_codec *codec) { struct alc_spec *spec; int board_config; - const struct alc_config_preset *preset; + int i, err; spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -2076,30 +2079,52 @@ static int patch_alc880(struct hda_codec *codec) board_config = snd_hda_check_board_config(codec, alc880_cfg_tbl); if (board_config < 0 || board_config >= ALC880_MODEL_LAST) { - snd_printd(KERN_INFO "hda_codec: Unknown model for ALC880\n"); - board_config = ALC880_3ST; + printk(KERN_INFO "hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...\n"); + board_config = ALC880_AUTO; } - preset = &alc880_presets[board_config]; - - spec->mixers[spec->num_mixers] = preset->mixers; - snd_assert(spec->mixers[0], kfree(spec);return -EINVAL); - spec->num_mixers++; - /* some MBs need GPIO setup */ - if (preset->gpio_payload) { - /* Enable mask and set output */ - snd_hda_codec_write(codec, codec->afg, 0, - AC_VERB_SET_GPIO_MASK, preset->gpio_payload); - snd_hda_codec_write(codec, codec->afg, 0, - AC_VERB_SET_GPIO_DIRECTION, preset->gpio_payload); - snd_hda_codec_write(codec, codec->afg, 0, - AC_VERB_SET_GPIO_DATA, preset->gpio_payload); + if (board_config == ALC880_AUTO) { + /* automatic parse from the BIOS config */ + err = alc880_parse_auto_config(codec); + if (err < 0) { + alc_free(codec); + return err; + } else if (! err) { + printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode...\n"); + board_config = ALC880_3ST; + } } - spec->front_panel = preset->front_panel; - spec->init_verbs = preset->init_verbs; - spec->channel_mode = preset->channel_mode; - spec->num_channel_mode = preset->num_channel_mode; + if (board_config != ALC880_AUTO) { + /* set up from the preset table */ + const struct alc_config_preset *preset; + + preset = &alc880_presets[board_config]; + + for (i = 0; preset->mixers[i]; i++) { + snd_assert(spec->num_mixers < ARRAY_SIZE(spec->mixers), break); + spec->mixers[spec->num_mixers++] = preset->mixers[i]; + } + for (i = 0; preset->init_verbs[i]; i++) { + snd_assert(spec->num_init_verbs < ARRAY_SIZE(spec->init_verbs), break); + spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i]; + } + + spec->channel_mode = preset->channel_mode; + spec->num_channel_mode = preset->num_channel_mode; + + spec->multiout.max_channels = spec->channel_mode[0].channels; + + spec->multiout.num_dacs = preset->num_dacs; + spec->multiout.dac_nids = preset->dac_nids; + spec->multiout.dig_out_nid = preset->dig_out_nid; + spec->multiout.hp_nid = preset->hp_nid; + + spec->input_mux = preset->input_mux; + + spec->num_adc_nids = preset->num_adc_nids; + spec->adc_nids = preset->adc_nids; + } spec->stream_name_analog = "ALC880 Analog"; spec->stream_analog_playback = &alc880_pcm_analog_playback; @@ -2109,26 +2134,64 @@ static int patch_alc880(struct hda_codec *codec) spec->stream_digital_playback = &alc880_pcm_digital_playback; spec->stream_digital_capture = &alc880_pcm_digital_capture; - spec->multiout.max_channels = spec->channel_mode[0].channels; - - spec->multiout.num_dacs = preset->num_dacs; - spec->multiout.dac_nids = preset->adc_nids; - spec->multiout.dig_out_nid = preset->dig_out_nid; - spec->multiout.hp_nid = preset->hp_nid; - - spec->input_mux = preset->input_mux; - spec->num_adc_nids = preset->num_adc_nids; - spec->adc_nids = preset->adc_nids; + if (! spec->adc_nids && spec->input_mux) { + /* check whether NID 0x07 is valid */ + unsigned int wcap = snd_hda_param_read(codec, alc880_adc_nids[0], + AC_PAR_AUDIO_WIDGET_CAP); + wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */ + if (wcap != AC_WID_AUD_IN) { + spec->adc_nids = alc880_adc_nids_alt; + spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt); + spec->mixers[spec->num_mixers] = alc880_capture_alt_mixer; + spec->num_mixers++; + } else { + spec->adc_nids = alc880_adc_nids; + spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids); + spec->mixers[spec->num_mixers] = alc880_capture_mixer; + spec->num_mixers++; + } + } codec->patch_ops = alc_patch_ops; + if (board_config == ALC880_AUTO) + codec->patch_ops.init = alc880_auto_init; return 0; } + /* * ALC260 support */ +static hda_nid_t alc260_dac_nids[1] = { + /* front */ + 0x02, +}; + +static hda_nid_t alc260_adc_nids[1] = { + /* ADC0 */ + 0x04, +}; + +static hda_nid_t alc260_hp_adc_nids[1] = { + /* ADC1 */ + 0x05, +}; + +#define ALC260_DIGOUT_NID 0x03 +#define ALC260_DIGIN_NID 0x06 + +static struct hda_input_mux alc260_capture_source = { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Front Mic", 0x1 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + /* * This is just place-holder, so there's something for alc_build_pcms to look * at when it calculates the maximum number of channels. ALC260 has no mixer @@ -2139,7 +2202,7 @@ static struct alc_channel_mode alc260_modes[1] = { { 2, NULL }, }; -snd_kcontrol_new_t alc260_base_mixer[] = { +static snd_kcontrol_new_t alc260_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), @@ -2168,7 +2231,7 @@ snd_kcontrol_new_t alc260_base_mixer[] = { { } /* end */ }; -snd_kcontrol_new_t alc260_hp_mixer[] = { +static snd_kcontrol_new_t alc260_hp_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), ALC_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), @@ -2260,14 +2323,12 @@ static struct hda_pcm_stream alc260_pcm_analog_playback = { .substreams = 1, .channels_min = 2, .channels_max = 2, - .nid = 0x2, }; static struct hda_pcm_stream alc260_pcm_analog_capture = { .substreams = 1, .channels_min = 2, .channels_max = 2, - .nid = 0x4, }; static struct hda_board_config alc260_cfg_tbl[] = { @@ -2296,7 +2357,7 @@ static int patch_alc260(struct hda_codec *codec) switch (board_config) { case ALC260_HP: - spec->mixers[spec->num_mixers] = alc260_base_mixer; + spec->mixers[spec->num_mixers] = alc260_hp_mixer; spec->num_mixers++; break; default: @@ -2305,7 +2366,9 @@ static int patch_alc260(struct hda_codec *codec) break; } - spec->init_verbs = alc260_init_verbs; + spec->init_verbs[0] = alc260_init_verbs; + spec->num_init_verbs = 1; + spec->channel_mode = alc260_modes; spec->num_channel_mode = ARRAY_SIZE(alc260_modes); @@ -2320,7 +2383,6 @@ static int patch_alc260(struct hda_codec *codec) spec->input_mux = &alc260_capture_source; switch (board_config) { case ALC260_HP: - spec->stream_analog_capture->nid = 5; spec->num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids); spec->adc_nids = alc260_hp_adc_nids; break; @@ -2335,6 +2397,7 @@ static int patch_alc260(struct hda_codec *codec) return 0; } + /* * ALC882 support * @@ -2463,42 +2526,35 @@ static struct hda_verb alc882_init_verbs[] = { {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Front Pin: to output mode */ + /* Front Pin: output 0 (0x0c) */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* Front Pin: mute amp left and right (no volume) */ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* select Front mixer (0x0c, index 0) */ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* Rear Pin */ + /* Rear Pin: output 1 (0x0d) */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* Rear Pin: mute amp left and right (no volume) */ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* select Rear mixer (0x0d, index 1) */ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, - /* CLFE Pin */ + /* CLFE Pin: output 2 (0x0e) */ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* CLFE Pin: mute amp left and right (no volume) */ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* select CLFE mixer (0x0e, index 2) */ {0x16, AC_VERB_SET_CONNECT_SEL, 0x02}, - /* Side Pin */ + /* Side Pin: output 3 (0x0f) */ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* Side Pin: mute amp left and right (no volume) */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* select Side mixer (0x0f, index 3) */ {0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, - /* Headphone Pin */ - {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - /* Headphone Pin: mute amp left and right (no volume) */ - {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* select Front mixer (0x0c, index 0) */ - {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* Mic (rear) pin widget for input and vref at 80% */ + /* Mic (rear) pin: input vref at 80% */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* Front Mic pin widget for input and vref at 80% */ + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Front Mic pin: input vref at 80% */ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* Line In pin widget for input */ + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Line In pin: input */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Line-2 In: Headphone output (output 0 - 0x0c) */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* CD pin widget for input */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, @@ -2548,8 +2604,9 @@ static int patch_alc882(struct hda_codec *codec) spec->multiout.dig_out_nid = ALC880_DIGOUT_NID; spec->dig_in_nid = ALC880_DIGIN_NID; - spec->front_panel = 1; - spec->init_verbs = alc882_init_verbs; + spec->init_verbs[0] = alc882_init_verbs; + spec->num_init_verbs = 1; + spec->channel_mode = alc882_ch_modes; spec->num_channel_mode = ARRAY_SIZE(alc882_ch_modes); -- cgit v1.2.2