From 940f3be4058e0aff0505fd6f68e29e547e10e552 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Mon, 17 Jan 2011 13:08:52 +0300 Subject: tty: serial: bfin_sport_uart: fix signedness error sport->port.irq is unsigned, check for <0 doesn't make sense. Explicitly cast it to int to check for error. Signed-off-by: Vasiliy Kulikov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/bfin_sport_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index e95c524d9d18..c3ec0a61d859 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev) sport->port.mapbase = res->start; sport->port.irq = platform_get_irq(pdev, 0); - if (sport->port.irq < 0) { + if ((int)sport->port.irq < 0) { dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); ret = -ENOENT; goto out_error_unmap; -- cgit v1.2.2 From a5f4dbf0ae972510faca799a809d3771fab323b7 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 12 Jan 2011 15:03:42 +0800 Subject: serial: mfd: remove the timeout workaround for A0 This is kind of a revert for commit 669b7a0938e "hsu: add a periodic timer to check dma rx channel", which is a workaround for a bug in A0 stepping silicon, where a dma rx data timeout is missing for some case. Since new silicon has fixed it and the old version is phasing out, no need to carry on it any more. Signed-off-by: Feng Tang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mfd.c | 38 -------------------------------------- 1 file changed, 38 deletions(-) diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index d40010a22ecd..776777462937 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -51,8 +51,6 @@ #define mfd_readl(obj, offset) readl(obj->reg + offset) #define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) -#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) - struct hsu_dma_buffer { u8 *buf; dma_addr_t dma_addr; @@ -65,7 +63,6 @@ struct hsu_dma_chan { enum dma_data_direction dirt; struct uart_hsu_port *uport; void __iomem *reg; - struct timer_list rx_timer; /* only needed by RX channel */ }; struct uart_hsu_port { @@ -355,8 +352,6 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ ); chan_writel(rxc, HSU_CH_CR, 0x3); - - mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); } /* Protected by spin_lock_irqsave(port->lock) */ @@ -420,7 +415,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) chan_writel(chan, HSU_CH_CR, 0x3); return; } - del_timer(&chan->rx_timer); dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, dbuf->dma_size, DMA_FROM_DEVICE); @@ -448,8 +442,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) tty_flip_buffer_push(tty); chan_writel(chan, HSU_CH_CR, 0x3); - chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; - add_timer(&chan->rx_timer); } @@ -870,8 +862,6 @@ static void serial_hsu_shutdown(struct uart_port *port) container_of(port, struct uart_hsu_port, port); unsigned long flags; - del_timer_sync(&up->rxc->rx_timer); - /* Disable interrupts from this port */ up->ier = 0; serial_out(up, UART_IER, 0); @@ -1343,28 +1333,6 @@ err_disable: return ret; } -static void hsu_dma_rx_timeout(unsigned long data) -{ - struct hsu_dma_chan *chan = (void *)data; - struct uart_hsu_port *up = chan->uport; - struct hsu_dma_buffer *dbuf = &up->rxbuf; - int count = 0; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - - if (!count) { - mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); - goto exit; - } - - hsu_dma_rx(up, 0); -exit: - spin_unlock_irqrestore(&up->port.lock, flags); -} - static void hsu_global_init(void) { struct hsu_port *hsu; @@ -1427,12 +1395,6 @@ static void hsu_global_init(void) dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + i * HSU_DMA_CHANS_REG_LENGTH; - /* Work around for RX */ - if (dchan->dirt == DMA_FROM_DEVICE) { - init_timer(&dchan->rx_timer); - dchan->rx_timer.function = hsu_dma_rx_timeout; - dchan->rx_timer.data = (unsigned long)dchan; - } dchan++; } -- cgit v1.2.2 From 2f1522eccb09188f0008168f75420bc2fedc9cae Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Wed, 2 Feb 2011 12:56:58 -0800 Subject: serial: ifx6x60: expanded info available from platform data Some platform attributes (e.g. max_hz, use_dma) were being intuited from the modem type. These things should be specified by the platform data. Added max_hz, use_dma to ifx_modem_platform_data definition, replaced is_6160 w/ modem_type, and changed clients accordingly Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 33 +++++++++++++++++---------------- drivers/tty/serial/ifx6x60.h | 4 +++- include/linux/spi/ifx_modem.h | 19 ++++++++++++------- 3 files changed, 32 insertions(+), 24 deletions(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index ab93763862d5..c42de7152eea 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -8,7 +8,7 @@ * Jan Dumon * * Copyright (C) 2009, 2010 Intel Corp - * Russ Gorby + * Russ Gorby * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data) /* * setup dma pointers */ - if (ifx_dev->is_6160) { + if (ifx_dev->use_dma) { ifx_dev->spi_msg.is_dma_mapped = 1; ifx_dev->tx_dma = ifx_dev->tx_bus; ifx_dev->rx_dma = ifx_dev->rx_bus; @@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) { int ret; int srdy; - struct ifx_modem_platform_data *pl_data = NULL; + struct ifx_modem_platform_data *pl_data; struct ifx_spi_device *ifx_dev; if (saved_ifx_dev) { @@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi) return -ENODEV; } + pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; + if (!pl_data) { + dev_err(&spi->dev, "missing platform data!"); + return -ENODEV; + } + /* initialize structure to hold our device variables */ ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); if (!ifx_dev) { @@ -983,7 +989,9 @@ static int ifx_spi_spi_probe(struct spi_device *spi) init_timer(&ifx_dev->spi_timer); ifx_dev->spi_timer.function = ifx_spi_timeout; ifx_dev->spi_timer.data = (unsigned long)ifx_dev; - ifx_dev->is_6160 = pl_data->is_6160; + ifx_dev->modem = pl_data->modem_type; + ifx_dev->use_dma = pl_data->use_dma; + ifx_dev->max_hz = pl_data->max_hz; /* ensure SPI protocol flags are initialized to enable transfer */ ifx_dev->spi_more = 0; @@ -1025,18 +1033,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi) goto error_ret; } - pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; - if (pl_data) { - ifx_dev->gpio.reset = pl_data->rst_pmu; - ifx_dev->gpio.po = pl_data->pwr_on; - ifx_dev->gpio.mrdy = pl_data->mrdy; - ifx_dev->gpio.srdy = pl_data->srdy; - ifx_dev->gpio.reset_out = pl_data->rst_out; - } else { - dev_err(&spi->dev, "missing platform data!"); - ret = -ENODEV; - goto error_ret; - } + ifx_dev->gpio.reset = pl_data->rst_pmu; + ifx_dev->gpio.po = pl_data->pwr_on; + ifx_dev->gpio.mrdy = pl_data->mrdy; + ifx_dev->gpio.srdy = pl_data->srdy; + ifx_dev->gpio.reset_out = pl_data->rst_out; dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d", ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h index deb7b8d977dc..0ec39b58ccc4 100644 --- a/drivers/tty/serial/ifx6x60.h +++ b/drivers/tty/serial/ifx6x60.h @@ -88,7 +88,9 @@ struct ifx_spi_device { dma_addr_t rx_dma; dma_addr_t tx_dma; - int is_6160; /* Modem type */ + int modem; /* Modem type */ + int use_dma; /* provide dma-able addrs in SPI msg */ + long max_hz; /* max SPI frequency */ spinlock_t write_lock; int write_pending; diff --git a/include/linux/spi/ifx_modem.h b/include/linux/spi/ifx_modem.h index a68f3b19d112..394fec9e7722 100644 --- a/include/linux/spi/ifx_modem.h +++ b/include/linux/spi/ifx_modem.h @@ -2,13 +2,18 @@ #define LINUX_IFX_MODEM_H struct ifx_modem_platform_data { - unsigned short rst_out; /* modem reset out */ - unsigned short pwr_on; /* power on */ - unsigned short rst_pmu; /* reset modem */ - unsigned short tx_pwr; /* modem power threshold */ - unsigned short srdy; /* SRDY */ - unsigned short mrdy; /* MRDY */ - unsigned short is_6160; /* Modem type */ + unsigned short rst_out; /* modem reset out */ + unsigned short pwr_on; /* power on */ + unsigned short rst_pmu; /* reset modem */ + unsigned short tx_pwr; /* modem power threshold */ + unsigned short srdy; /* SRDY */ + unsigned short mrdy; /* MRDY */ + unsigned char modem_type; /* Modem type */ + unsigned long max_hz; /* max SPI frequency */ + unsigned short use_dma:1; /* spi protocol driver supplies + dma-able addrs */ }; +#define IFX_MODEM_6160 1 +#define IFX_MODEM_6260 2 #endif -- cgit v1.2.2 From 364a6ece62455f669336e50d5b00f14ba650da93 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Tue, 1 Feb 2011 08:30:41 +0100 Subject: OMAP: Enable Magic SysRq on serial console ttyOx Magic SysRq key is not working for OMAP on new serial console ttyOx because SUPPORT_SYSRQ is not defined for omap-serial. This patch defines SUPPORT_SYSRQ in omap-serial and enables handling of Magic SysRq character. Further there is an issue of losing first break character. Removing the reset of the lsr_break_flag fixes this issue. Signed-off-by: Thomas Weber Acked-by: Govindraj.R Tested-by: Manjunath G Kondaiah Acked-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7f2f01058789..699b34446a55 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -20,6 +20,10 @@ * this driver as required for the omap-platform. */ +#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + #include #include #include @@ -190,7 +194,6 @@ static inline void receive_chars(struct uart_omap_port *up, int *status) if (up->port.line == up->port.cons->index) { /* Recover the break flag from console xmit */ lsr |= up->lsr_break_flag; - up->lsr_break_flag = 0; } #endif if (lsr & UART_LSR_BI) -- cgit v1.2.2 From 78841462d72fe7038cb7ea48adecc6fc395f2dc5 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 24 Jan 2011 17:51:22 +0200 Subject: serial: omap-serial: Enable the UART wake-up bits always OMAP can do also dynamic idling so wake-up enable register should be set also while system is running. If UART_OMAP_WER is not set, then for instance the RX activity cannot wake up the UART port that is sleeping. This RX wake-up feature was working when the 8250 driver was used instead of omap-serial. Reason for this is that the 8250 doesn't set the UART_OMAP_WER and then arch/arm/mach-omap2/pm34xx.c ends up saving and restoring the reset default which is the same than value OMAP_UART_WER_MOD_WKUP here. Fix this by moving the conditional UART_OMAP_WER write from serial_omap_pm into serial_omap_startup where wake-up bits are set unconditionally. Signed-off-by: Jarkko Nikula Cc: Govindraj.R Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 699b34446a55..763537943a53 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -520,6 +520,9 @@ static int serial_omap_startup(struct uart_port *port) up->ier = UART_IER_RLSI | UART_IER_RDI; serial_out(up, UART_IER, up->ier); + /* Enable module level wake up */ + serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP); + up->port_activity = jiffies; return 0; } @@ -827,9 +830,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); - /* Enable module level wake up */ - serial_out(up, UART_OMAP_WER, - (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0); } static void serial_omap_release_port(struct uart_port *port) -- cgit v1.2.2 From 0a1f1a0b626d79071ee9fe91b7fcd28be6332677 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 24 Jan 2011 17:54:12 +0100 Subject: tty_ldisc: don't use flush_scheduled_work() flush_scheduled_work() is scheduled to be deprecated. Explicitly sync flush the used work items instead. Note that before this change, flush_scheduled_work() wouldn't have properly flushed tty->buf.work if it were on timer. Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 4214d58276f7..c42f402db9ba 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -534,6 +534,19 @@ static int tty_ldisc_halt(struct tty_struct *tty) return cancel_delayed_work_sync(&tty->buf.work); } +/** + * tty_ldisc_flush_works - flush all works of a tty + * @tty: tty device to flush works for + * + * Sync flush all works belonging to @tty. + */ +static void tty_ldisc_flush_works(struct tty_struct *tty) +{ + flush_work_sync(&tty->hangup_work); + flush_work_sync(&tty->SAK_work); + flush_delayed_work_sync(&tty->buf.work); +} + /** * tty_ldisc_wait_idle - wait for the ldisc to become idle * @tty: tty to wait for @@ -653,7 +666,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) mutex_unlock(&tty->ldisc_mutex); - flush_scheduled_work(); + tty_ldisc_flush_works(tty); retval = tty_ldisc_wait_idle(tty); @@ -905,7 +918,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) tty_unlock(); tty_ldisc_halt(tty); - flush_scheduled_work(); + tty_ldisc_flush_works(tty); tty_lock(); mutex_lock(&tty->ldisc_mutex); -- cgit v1.2.2 From d8653d305ef66861c91fa7455fb8038460a7274c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 25 Jan 2011 14:15:11 +0000 Subject: serial: mrst_max3110: make buffer larger This is used to store the spi_device ->modalias so they have to be the same size. SPI_NAME_SIZE is 32. Signed-off-by: Dan Carpenter Signed-off-by: Alan Cox Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mrst_max3110.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index b62857bf2fdb..37e13c3d91d9 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -51,7 +51,7 @@ struct uart_max3110 { struct uart_port port; struct spi_device *spi; - char name[24]; + char name[SPI_NAME_SIZE]; wait_queue_head_t wq; struct task_struct *main_thread; -- cgit v1.2.2 From 5933a161abcb8d83a2c145177f48027c3c0a8995 Mon Sep 17 00:00:00 2001 From: Yin Kangkai Date: Sun, 30 Jan 2011 11:15:30 +0800 Subject: serial-core: reset the console speed on resume On some platforms, we need to restore the console speed on resume even it was not suspended (no_console_suspend), and on others we don't have to do that. So don't care about the "console_suspend_enabled" and unconditionally reset the console speed if it is a console. This is actually a redo of ba15ab0 (Set proper console speed on resume if console suspend is disabled) from Deepak Saxena. I also tried to investigate more to find out if this change will break others, here is what I've found out: commit 891b9dd10764352926e1e107756aa229dfa2c210 Author: Jason Wang serial-core: restore termios settings when resume console ports commit ca2e71aa8cfb0056ce720f3fd53f59f5fac4a3e1 Author: Jason Wang serial-core: skip call set_termios/console_start when no_console_suspend commit 4547be7809a3b775ce750ec7f8b5748954741523 Author: Stanislav Brabec serial-core: resume serial hardware with no_console_suspend commit ba15ab0e8de0d4439a91342ad52d55ca9e313f3d Author: Deepak Saxena Set proper console speed on resume if console suspend is disabled from ba15ab0, we learned that, even if the console suspend is disabled (when no_console_suspend is set), we may still need to "reset the port to the state it was in before we suspended." Then with 4547be7, this piece of code is removed. And then Jason Wang added that back in ca2e71a and 891b9dd, to fix some breakage on OMAP3EVM platform. From ca2e71a we learned that the "set_termios" things is actually needed by both console is suspended and not suspended. That's why I removed the console_suspended_enabled condition, and only call console_start() when we actually suspeneded it. I also noticed in this thread: http://marc.info/?t=129079257100004&r=1&w=2, which talked about on some platforms, UART HW will be cut power whether or not we set no_console_suspend, and then on resume it does not work quite well. I have a similar HW, and this patch fixed this issue, don't know if this patch also works on their platforms. [Update: Stanislav tested this patch on Zaurus and reported it improves the situation. Thanks.] CC: Greg KH CC: Deepak Saxena CC: Jason Wang CC: Stanislav Brabec CC: Daniel Drake Signed-off-by: Yin Kangkai Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 460a72d91bb7..20563c509b21 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2064,7 +2064,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) /* * Re-enable the console device after suspending. */ - if (console_suspend_enabled && uart_console(uport)) { + if (uart_console(uport)) { /* * First try to use the console cflag setting. */ @@ -2077,9 +2077,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) if (port->tty && port->tty->termios && termios.c_cflag == 0) termios = *(port->tty->termios); - uart_change_pm(state, 0); uport->ops->set_termios(uport, &termios, NULL); - console_start(uport->cons); + if (console_suspend_enabled) + console_start(uport->cons); } if (port->flags & ASYNC_SUSPENDED) { -- cgit v1.2.2 From f094298bae5f5d0e1cb3bff4621aae7ef486812a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 24 Jan 2011 17:53:41 +0100 Subject: 68328serial: remove unsed m68k_serial->tqueue_hangup m68k_serial->tqueue_hangup is unused. Remove it. Signed-off-by: Tejun Heo Cc: Greg Ungerer Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/68328serial.c | 23 ----------------------- drivers/tty/serial/68328serial.h | 1 - 2 files changed, 24 deletions(-) diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index be0ebce36e54..a9d99856c892 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work) #endif } -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> rs_hangup() - * - */ -static void do_serial_hangup(struct work_struct *work) -{ - struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - tty_hangup(tty); -} - - static int startup(struct m68k_serial * info) { m68328_uart *uart = &uart_addr[info->line]; @@ -1348,7 +1326,6 @@ rs68328_init(void) info->count = 0; info->blocked_open = 0; INIT_WORK(&info->tqueue, do_softint); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); info->line = i; diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h index 664ceb0a158c..8c9c3c0745db 100644 --- a/drivers/tty/serial/68328serial.h +++ b/drivers/tty/serial/68328serial.h @@ -159,7 +159,6 @@ struct m68k_serial { int xmit_tail; int xmit_cnt; struct work_struct tqueue; - struct work_struct tqueue_hangup; wait_queue_head_t open_wait; wait_queue_head_t close_wait; }; -- cgit v1.2.2 From 4564e1ef219fa69ed827fe2613569543a6b26fbc Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Jan 2011 18:00:01 +0900 Subject: serial: pch_uart: support new device ML7213 Support ML7213 device of OKI SEMICONDUCTOR. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 5 +++++ drivers/tty/serial/pch_uart.c | 27 +++++++++++++++++++-------- 2 files changed, 24 insertions(+), 8 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2b8334601c8b..86e2c994d440 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1596,4 +1596,9 @@ config SERIAL_PCH_UART This driver is for PCH(Platform controller Hub) UART of Intel EG20T which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. + + This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/ + Output Hub) which is for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. endmenu diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 70a61458ec42..3b2fb93e1fa1 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -40,10 +40,11 @@ enum { #define PCH_UART_DRIVER_DEVICE "ttyPCH" -#define PCH_UART_NR_GE_256FIFO 1 -#define PCH_UART_NR_GE_64FIFO 3 -#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO) -#define PCH_UART_NR PCH_UART_NR_GE +/* Set the max number of UART port + * Intel EG20T PCH: 4 port + * OKI SEMICONDUCTOR ML7213 IOH: 3 port +*/ +#define PCH_UART_NR 4 #define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) #define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) @@ -192,6 +193,8 @@ enum { #define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) #define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) +#define PCI_VENDOR_ID_ROHM 0x10DB + struct pch_uart_buffer { unsigned char *buf; int size; @@ -1249,7 +1252,7 @@ static struct uart_driver pch_uart_driver = { }; static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, - int port_type) + const struct pci_device_id *id) { struct eg20t_port *priv; int ret; @@ -1258,6 +1261,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, unsigned char *rxbuf; int fifosize, base_baud; static int num; + int port_type = id->driver_data; priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); if (priv == NULL) @@ -1269,11 +1273,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, switch (port_type) { case PORT_UNKNOWN: - fifosize = 256; /* UART0 */ + fifosize = 256; /* EG20T/ML7213: UART0 */ base_baud = 1843200; /* 1.8432MHz */ break; case PORT_8250: - fifosize = 64; /* UART1~3 */ + fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/ base_baud = 1843200; /* 1.8432MHz */ break; default: @@ -1307,6 +1311,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, pci_set_drvdata(pdev, priv); pch_uart_hal_request(pdev, fifosize, base_baud); + ret = uart_add_one_port(&pch_uart_driver, &priv->port); if (ret < 0) goto init_port_hal_free; @@ -1384,6 +1389,12 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { .driver_data = PCH_UART_2LINE}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), .driver_data = PCH_UART_2LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027), + .driver_data = PCH_UART_8LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028), + .driver_data = PCH_UART_2LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029), + .driver_data = PCH_UART_2LINE}, {0,}, }; @@ -1397,7 +1408,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, if (ret < 0) goto probe_error; - priv = pch_uart_init_port(pdev, id->driver_data); + priv = pch_uart_init_port(pdev, id); if (!priv) { ret = -EBUSY; goto probe_disable_device; -- cgit v1.2.2 From 380042f2db653b324ae756d102d872c1ecd412c5 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Jan 2011 18:00:02 +0900 Subject: serial: pch_uart: revert Kconfig for non-DMA mode PCH_DMA is not always enabled when a user uses PCH_UART. Since overhead of DMA is not small, in case of low frequent communication, without DMA is better. Thus, "select PCH_DMA" and DMADEVICES are unnecessary Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 86e2c994d440..aaedbad93a75 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1588,10 +1588,9 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH UART" - depends on PCI && DMADEVICES + tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH" + depends on PCI select SERIAL_CORE - select PCH_DMA help This driver is for PCH(Platform controller Hub) UART of Intel EG20T which is an IOH(Input/Output Hub) for x86 embedded processor. -- cgit v1.2.2 From a99632014631409483a481a6a0d77d09ded47239 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 3 Feb 2011 15:48:34 -0800 Subject: hvc_dcc: Fix bad code generation by marking assembly volatile Without marking the asm __dcc_getstatus() volatile my compiler decides it can cache the value of __ret in a register and then check the value of it continually in hvc_dcc_put_chars() (I had to replace get_wait/put_wait with 1 and fixup the branch otherwise my disassembler barfed on __dcc_(get|put)char). 00000000 : 0: ee103e11 mrc 14, 0, r3, cr0, cr1, {0} 4: e3a0c000 mov ip, #0 ; 0x0 8: e2033202 and r3, r3, #536870912 ; 0x20000000 c: ea000006 b 2c 10: e3530000 cmp r3, #0 ; 0x0 14: 1afffffd bne 10 18: e7d1000c ldrb r0, [r1, ip] 1c: ee10fe11 mrc 14, 0, pc, cr0, cr1, {0} 20: 2afffffd bcs 1c 24: ee000e15 mcr 14, 0, r0, cr0, cr5, {0} 28: e28cc001 add ip, ip, #1 ; 0x1 2c: e15c0002 cmp ip, r2 30: bafffff6 blt 10 34: e1a00002 mov r0, r2 38: e12fff1e bx lr As you can see, the value of the mrc is checked against DCC_STATUS_TX (bit 29) and then stored in r3 for later use. Marking the asm volatile produces the following: 00000000 : 0: e3a03000 mov r3, #0 ; 0x0 4: ea000007 b 28 8: ee100e11 mrc 14, 0, r0, cr0, cr1, {0} c: e3100202 tst r0, #536870912 ; 0x20000000 10: 1afffffc bne 8 14: e7d10003 ldrb r0, [r1, r3] 18: ee10fe11 mrc 14, 0, pc, cr0, cr1, {0} 1c: 2afffffd bcs 18 20: ee000e15 mcr 14, 0, r0, cr0, cr5, {0} 24: e2833001 add r3, r3, #1 ; 0x1 28: e1530002 cmp r3, r2 2c: bafffff5 blt 8 30: e1a00002 mov r0, r2 34: e12fff1e bx lr which looks better and actually works. Mark all the inline assembly in this file as volatile since we don't want the compiler to optimize away these statements or move them around in any way. Acked-by: Tony Lindgren Cc: Arnd Bergmann Acked-by: Nicolas Pitre Cc: Daniel Walker Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_dcc.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 6470f63deb4b..155ec105e1c8 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -33,8 +33,7 @@ static inline u32 __dcc_getstatus(void) { u32 __ret; - - asm("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" + asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" : "=r" (__ret) : : "cc"); return __ret; @@ -46,7 +45,7 @@ static inline char __dcc_getchar(void) { char __c; - asm("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\ + asm volatile("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\ bne get_wait \n\ mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" : "=r" (__c) : : "cc"); @@ -58,7 +57,7 @@ static inline char __dcc_getchar(void) { char __c; - asm("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" + asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" : "=r" (__c)); return __c; @@ -68,7 +67,7 @@ static inline char __dcc_getchar(void) #if defined(CONFIG_CPU_V7) static inline void __dcc_putchar(char c) { - asm("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\ + asm volatile("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\ bcs put_wait \n\ mcr p14, 0, %0, c0, c5, 0 " : : "r" (c) : "cc"); @@ -76,7 +75,7 @@ static inline void __dcc_putchar(char c) #else static inline void __dcc_putchar(char c) { - asm("mcr p14, 0, %0, c0, c5, 0 @ write a char" + asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" : /* no output register */ : "r" (c)); } -- cgit v1.2.2 From bf73bd35a296b31dace098b9104b6b593ee0070f Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 3 Feb 2011 15:48:35 -0800 Subject: hvc_dcc: Simplify put_chars()/get_chars() loops Casting and anding with 0xff is unnecessary in hvc_dcc_put_chars() since buf is already a char[]. __dcc_get_char() can't return an int less than 0 since it only returns a char. Simplify the if statement in hvc_dcc_get_chars() to take this into account. Cc: Daniel Walker Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_dcc.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 155ec105e1c8..ad23cc8082a0 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -89,7 +89,7 @@ static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) while (__dcc_getstatus() & DCC_STATUS_TX) cpu_relax(); - __dcc_putchar((char)(buf[i] & 0xFF)); + __dcc_putchar(buf[i]); } return count; @@ -99,15 +99,11 @@ static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count) { int i; - for (i = 0; i < count; ++i) { - int c = -1; - + for (i = 0; i < count; ++i) if (__dcc_getstatus() & DCC_STATUS_RX) - c = __dcc_getchar(); - if (c < 0) + buf[i] = __dcc_getchar(); + else break; - buf[i] = c; - } return i; } -- cgit v1.2.2 From 8e6d3fe1af38bea3f6c003f8737d2e3a02d00fa0 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 3 Feb 2011 15:48:36 -0800 Subject: hvc_dcc: Simplify assembly for v6 and v7 ARM The inline assembly differences for v6 vs. v7 in the hvc_dcc driver are purely optimizations. On a v7 processor, an mrc with the pc sets the condition codes to the 28-31 bits of the register being read. It just so happens that the TX/RX full bits the DCC driver is testing for are high enough in the register to be put into the condition codes. On a v6 processor, this "feature" isn't implemented and thus we have to do the usual read, mask, test operations to check for TX/RX full. Since we already test the RX/TX full bits before calling __dcc_getchar() and __dcc_putchar() we don't actually need to do anything special for v7 over v6. The only difference is in hvc_dcc_get_chars(). We would test RX full, poll RX full, and then read a character from the buffer, whereas now we will test RX full, read a character from the buffer, and then test RX full again for the second iteration of the loop. It doesn't seem possible for the buffer to go from full to empty between testing the RX full and reading a character. Therefore, replace the v7 versions with the v6 versions and everything works the same. Acked-by: Tony Lindgren Cc: Arnd Bergmann Acked-by: Nicolas Pitre Cc: Daniel Walker Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_dcc.c | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index ad23cc8082a0..435f6facbc23 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -40,19 +40,6 @@ static inline u32 __dcc_getstatus(void) } -#if defined(CONFIG_CPU_V7) -static inline char __dcc_getchar(void) -{ - char __c; - - asm volatile("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\ - bne get_wait \n\ - mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" - : "=r" (__c) : : "cc"); - - return __c; -} -#else static inline char __dcc_getchar(void) { char __c; @@ -62,24 +49,13 @@ static inline char __dcc_getchar(void) return __c; } -#endif -#if defined(CONFIG_CPU_V7) -static inline void __dcc_putchar(char c) -{ - asm volatile("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\ - bcs put_wait \n\ - mcr p14, 0, %0, c0, c5, 0 " - : : "r" (c) : "cc"); -} -#else static inline void __dcc_putchar(char c) { asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" : /* no output register */ : "r" (c)); } -#endif static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) { -- cgit v1.2.2 From 9fc3de9c83565fcaa23df74c2fc414bb6e7efb0a Mon Sep 17 00:00:00 2001 From: Arthur Taylor Date: Fri, 4 Feb 2011 13:55:50 -0800 Subject: vt: Add virtual console keyboard mode OFF virtual console: add keyboard mode OFF Add a new mode for the virtual console keyboard OFF in which all input other than shift keys is ignored. Prevents vt input buffers from overflowing when a program opens but doesn't read from a tty, like X11 using evdev for input. Signed-off-by: Arthur Taylor Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/keyboard.c | 5 +++-- drivers/tty/vt/vt_ioctl.c | 3 +++ include/linux/kbd_kern.h | 3 ++- include/linux/kd.h | 1 + 4 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index e95d7876ca6b..6dd3c68c13ad 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -654,7 +654,8 @@ static void k_spec(struct vc_data *vc, unsigned char value, char up_flag) if (value >= ARRAY_SIZE(fn_handler)) return; if ((kbd->kbdmode == VC_RAW || - kbd->kbdmode == VC_MEDIUMRAW) && + kbd->kbdmode == VC_MEDIUMRAW || + kbd->kbdmode == VC_OFF) && value != KVAL(K_SAK)) return; /* SAK is allowed even in raw mode */ fn_handler[value](vc); @@ -1295,7 +1296,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) if (rc == NOTIFY_STOP) return; - if (raw_mode && type != KT_SPEC && type != KT_SHIFT) + if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT) return; (*k_handler[type])(vc, keysym & 0xff, !down); diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 1235ebda6e1c..6bcf05bf4978 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -688,6 +688,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, kbd->kbdmode = VC_UNICODE; compute_shiftstate(); break; + case K_OFF: + kbd->kbdmode = VC_OFF; + break; default: ret = -EINVAL; goto out; diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h index 506ad20c18f8..4b0761cc7dd9 100644 --- a/include/linux/kbd_kern.h +++ b/include/linux/kbd_kern.h @@ -50,11 +50,12 @@ struct kbd_struct { #define VC_CAPSLOCK 2 /* capslock mode */ #define VC_KANALOCK 3 /* kanalock mode */ - unsigned char kbdmode:2; /* one 2-bit value */ + unsigned char kbdmode:3; /* one 3-bit value */ #define VC_XLATE 0 /* translate keycodes using keymap */ #define VC_MEDIUMRAW 1 /* medium raw (keycode) mode */ #define VC_RAW 2 /* raw (scancode) mode */ #define VC_UNICODE 3 /* Unicode mode */ +#define VC_OFF 4 /* disabled mode */ unsigned char modeflags:5; #define VC_APPLIC 0 /* application key mode */ diff --git a/include/linux/kd.h b/include/linux/kd.h index 15f2853ea58f..c36d8476db55 100644 --- a/include/linux/kd.h +++ b/include/linux/kd.h @@ -81,6 +81,7 @@ struct unimapinit { #define K_XLATE 0x01 #define K_MEDIUMRAW 0x02 #define K_UNICODE 0x03 +#define K_OFF 0x04 #define KDGKBMODE 0x4B44 /* gets current keyboard mode */ #define KDSKBMODE 0x4B45 /* sets current keyboard mode */ -- cgit v1.2.2 From 5427bcf5e95245d3e220742ac703182bdb973769 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 4 Feb 2011 20:45:49 -0500 Subject: hvc: add Blackfin JTAG console support This converts the existing bfin_jtag_comm TTY driver to the HVC layer so that the common HVC code can worry about all of the TTY/polling crap and leave the Blackfin code to worry about the Blackfin bits. Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/char/Kconfig | 9 ++++ drivers/tty/hvc/Makefile | 1 + drivers/tty/hvc/hvc_bfin_jtag.c | 105 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 115 insertions(+) create mode 100644 drivers/tty/hvc/hvc_bfin_jtag.c diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index b7980a83ce2d..17f9b968b988 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -691,6 +691,15 @@ config HVC_DCC driver. This console is used through a JTAG only on ARM. If you don't have a JTAG then you probably don't want this option. +config HVC_BFIN_JTAG + bool "Blackfin JTAG console" + depends on BLACKFIN + select HVC_DRIVER + help + This console uses the Blackfin JTAG to create a console under the + the HVC driver. If you don't have JTAG, then you probably don't + want this option. + config VIRTIO_CONSOLE tristate "Virtio console" depends on VIRTIO diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index e6bed5f177ff..7b0edbce9009 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -9,5 +9,6 @@ obj-$(CONFIG_HVC_IRQ) += hvc_irq.o obj-$(CONFIG_HVC_XEN) += hvc_xen.o obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o +obj-$(CONFIG_HVC_BFIN_JTAG) += hvc_bfin_jtag.o obj-$(CONFIG_HVCS) += hvcs.o obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o diff --git a/drivers/tty/hvc/hvc_bfin_jtag.c b/drivers/tty/hvc/hvc_bfin_jtag.c new file mode 100644 index 000000000000..31d6cc6a77af --- /dev/null +++ b/drivers/tty/hvc/hvc_bfin_jtag.c @@ -0,0 +1,105 @@ +/* + * Console via Blackfin JTAG Communication + * + * Copyright 2008-2011 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +/* See the Debug/Emulation chapter in the HRM */ +#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ +#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ +#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ +#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ + +/* Helper functions to glue the register API to simple C operations */ +static inline uint32_t bfin_write_emudat(uint32_t emudat) +{ + __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_read_emudat(void) +{ + uint32_t emudat; + __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); + return emudat; +} + +/* Send data to the host */ +static int hvc_bfin_put_chars(uint32_t vt, const char *buf, int count) +{ + static uint32_t outbound_len; + uint32_t emudat; + int ret; + + if (bfin_read_DBGSTAT() & EMUDOF) + return 0; + + if (!outbound_len) { + outbound_len = count; + bfin_write_emudat(outbound_len); + return 0; + } + + ret = min(outbound_len, (uint32_t)4); + memcpy(&emudat, buf, ret); + bfin_write_emudat(emudat); + outbound_len -= ret; + + return ret; +} + +/* Receive data from the host */ +static int hvc_bfin_get_chars(uint32_t vt, char *buf, int count) +{ + static uint32_t inbound_len; + uint32_t emudat; + int ret; + + if (!(bfin_read_DBGSTAT() & EMUDIF)) + return 0; + emudat = bfin_read_emudat(); + + if (!inbound_len) { + inbound_len = emudat; + return 0; + } + + ret = min(inbound_len, (uint32_t)4); + memcpy(buf, &emudat, ret); + inbound_len -= ret; + + return ret; +} + +/* Glue the HVC layers to the Blackfin layers */ +static const struct hv_ops hvc_bfin_get_put_ops = { + .get_chars = hvc_bfin_get_chars, + .put_chars = hvc_bfin_put_chars, +}; + +static int __init hvc_bfin_console_init(void) +{ + hvc_instantiate(0, 0, &hvc_bfin_get_put_ops); + return 0; +} +console_initcall(hvc_bfin_console_init); + +static int __init hvc_bfin_init(void) +{ + hvc_alloc(0, 0, &hvc_bfin_get_put_ops, 128); + return 0; +} +device_initcall(hvc_bfin_init); -- cgit v1.2.2 From 1ffdda950394b6da54d68e9643bc691ebad7a6cc Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Sun, 6 Feb 2011 09:31:53 -0800 Subject: TTY: use appropriate printk priority level printk()s without a priority level default to KERN_WARNING. To reduce noise at KERN_WARNING, this patch set the priority level appriopriately for unleveled printks()s. This should be useful to folks that look at dmesg warnings closely. Signed-off-by: Mandeep Singh Baines Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 147ede3423df..d5669ff72df4 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2157,10 +2157,10 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co currcons = vc->vc_num; if (!vc_cons_allocated(currcons)) { - /* could this happen? */ - printk_once("con_write: tty %d not allocated\n", currcons+1); - console_unlock(); - return 0; + /* could this happen? */ + pr_warn_once("con_write: tty %d not allocated\n", currcons+1); + console_unlock(); + return 0; } himask = vc->vc_hi_font_mask; @@ -2940,7 +2940,7 @@ static int __init con_init(void) gotoxy(vc, vc->vc_x, vc->vc_y); csi_J(vc, 0); update_screen(vc); - printk("Console: %s %s %dx%d", + pr_info("Console: %s %s %dx%d", vc->vc_can_do_color ? "colour" : "mono", display_desc, vc->vc_cols, vc->vc_rows); printable = 1; @@ -3103,7 +3103,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last, clear_buffer_attributes(vc); } - printk("Console: switching "); + pr_info("Console: switching "); if (!deflt) printk("consoles %d-%d ", first+1, last+1); if (j >= 0) { @@ -3809,7 +3809,8 @@ void do_unblank_screen(int leaving_gfx) return; if (!vc_cons_allocated(fg_console)) { /* impossible */ - printk("unblank_screen: tty %d not allocated ??\n", fg_console+1); + pr_warning("unblank_screen: tty %d not allocated ??\n", + fg_console+1); return; } vc = vc_cons[fg_console].d; -- cgit v1.2.2 From dc1892c4bc6960121ca4c8023a07c815cfd689be Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 7 Feb 2011 19:31:24 +0100 Subject: tty,vcs: lseek/VC-release race fix there's a race between vcs's lseek handler and VC release. The lseek handler does not hold console_lock and touches VC's size info. If during this the VC got released, there's an access violation. Following program triggers the issue for me: [SNIP] #define _BSD_SOURCE #include #include #include #include #include #include #include #include static int run_seek(void) { while(1) { int fd; fd = open("./vcs30", O_RDWR); while(lseek(fd, 0, 0) != -1); close(fd); } } static int open_ioctl_tty(void) { return open("/dev/tty1", O_RDWR); } static int do_ioctl(int fd, int req, int i) { return ioctl(fd, req, i); } #define INIT(i) do_ioctl(ioctl_fd, VT_ACTIVATE, i) #define SHUT(i) do_ioctl(ioctl_fd, VT_DISALLOCATE, i) int main(int argc, char **argv) { int ioctl_fd = open_ioctl_tty(); if (ioctl < 0) { perror("open tty1 failed\n"); return -1; } if ((-1 == mknod("vcs30", S_IFCHR|0666, makedev(7, 30))) && (errno != EEXIST)) { printf("errno %d\n", errno); perror("failed to create vcs30"); return -1; } do_ioctl(ioctl_fd, VT_LOCKSWITCH, 0); if (!fork()) run_seek(); while(1) { INIT(30); SHUT(30); } return 0; } [SNIP] Signed-off-by: Jiri Olsa Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vc_screen.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index a672ed192d33..3c27c4bc6040 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -159,7 +159,13 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) int size; mutex_lock(&con_buf_mtx); + console_lock(); size = vcs_size(file->f_path.dentry->d_inode); + console_unlock(); + if (size < 0) { + mutex_unlock(&con_buf_mtx); + return size; + } switch (orig) { default: mutex_unlock(&con_buf_mtx); @@ -237,6 +243,12 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) * could sleep. */ size = vcs_size(inode); + if (size < 0) { + if (read) + break; + ret = size; + goto unlock_out; + } if (pos >= size) break; if (count > size - pos) @@ -436,6 +448,12 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) * Return data written up to now on failure. */ size = vcs_size(inode); + if (size < 0) { + if (written) + break; + ret = size; + goto unlock_out; + } if (pos >= size) break; if (this_round > size - pos) -- cgit v1.2.2 From fcdba07ee390d9d9c15de8b2a17baef689284fcc Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 7 Feb 2011 19:31:25 +0100 Subject: tty,vcs removing con_buf/conf_buf_mtx seems there's no longer need for using con_buf/conf_buf_mtx as vcs_read/vcs_write buffer for user's data. The do_con_write function, that was the other user of this, is currently using its own kmalloc-ed buffer. Not sure when this got changed, as I was able to find this code in 2.6.9, but it's already gone as far as current git history goes - 2.6.12-rc2. AFAICS there's a behaviour change with the current change. The lseek is not completely mutually exclusive with the vcs_read/vcs_write - the file->f_pos might get updated via lseek callback during the vcs_read/vcs_write processing. I tried to find out if the prefered behaviour is to keep this in sync within read/write/lseek functions, but I did not find any pattern on different places. I guess if user end up calling write/lseek from different threads she should know what she's doing. If needed we could use dedicated fd mutex/buffer. Signed-off-by: Jiri Olsa Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vc_screen.c | 98 ++++++++++++++++++++++++---------------------- drivers/tty/vt/vt.c | 12 ------ include/linux/vt_kern.h | 8 ---- 3 files changed, 52 insertions(+), 66 deletions(-) diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index 3c27c4bc6040..7b3bfbe2e6de 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -51,6 +50,8 @@ #undef addr #define HEADER_SIZE 4 +#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE) + struct vcs_poll_data { struct notifier_block notifier; unsigned int cons_num; @@ -131,21 +132,45 @@ vcs_poll_data_get(struct file *file) return poll; } +/* + * Returns VC for inode. + * Must be called with console_lock. + */ +static struct vc_data* +vcs_vc(struct inode *inode, int *viewed) +{ + unsigned int currcons = iminor(inode) & 127; + + WARN_CONSOLE_UNLOCKED(); + + if (currcons == 0) { + currcons = fg_console; + if (viewed) + *viewed = 1; + } else { + currcons--; + if (viewed) + *viewed = 0; + } + return vc_cons[currcons].d; +} + +/* + * Returns size for VC carried by inode. + * Must be called with console_lock. + */ static int vcs_size(struct inode *inode) { int size; int minor = iminor(inode); - int currcons = minor & 127; struct vc_data *vc; - if (currcons == 0) - currcons = fg_console; - else - currcons--; - if (!vc_cons_allocated(currcons)) + WARN_CONSOLE_UNLOCKED(); + + vc = vcs_vc(inode, NULL); + if (!vc) return -ENXIO; - vc = vc_cons[currcons].d; size = vc->vc_rows * vc->vc_cols; @@ -158,17 +183,13 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) { int size; - mutex_lock(&con_buf_mtx); console_lock(); size = vcs_size(file->f_path.dentry->d_inode); console_unlock(); - if (size < 0) { - mutex_unlock(&con_buf_mtx); + if (size < 0) return size; - } switch (orig) { default: - mutex_unlock(&con_buf_mtx); return -EINVAL; case 2: offset += size; @@ -179,11 +200,9 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) break; } if (offset < 0 || offset > size) { - mutex_unlock(&con_buf_mtx); return -EINVAL; } file->f_pos = offset; - mutex_unlock(&con_buf_mtx); return file->f_pos; } @@ -196,12 +215,15 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) struct vc_data *vc; struct vcs_poll_data *poll; long pos; - long viewed, attr, read; - int col, maxcol; + long attr, read; + int col, maxcol, viewed; unsigned short *org = NULL; ssize_t ret; + char *con_buf; - mutex_lock(&con_buf_mtx); + con_buf = (char *) __get_free_page(GFP_KERNEL); + if (!con_buf) + return -ENOMEM; pos = *ppos; @@ -211,18 +233,10 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) console_lock(); attr = (currcons & 128); - currcons = (currcons & 127); - if (currcons == 0) { - currcons = fg_console; - viewed = 1; - } else { - currcons--; - viewed = 0; - } ret = -ENXIO; - if (!vc_cons_allocated(currcons)) + vc = vcs_vc(inode, &viewed); + if (!vc) goto unlock_out; - vc = vc_cons[currcons].d; ret = -EINVAL; if (pos < 0) @@ -367,7 +381,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) ret = read; unlock_out: console_unlock(); - mutex_unlock(&con_buf_mtx); + free_page((unsigned long) con_buf); return ret; } @@ -378,13 +392,16 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) unsigned int currcons = iminor(inode); struct vc_data *vc; long pos; - long viewed, attr, size, written; + long attr, size, written; char *con_buf0; - int col, maxcol; + int col, maxcol, viewed; u16 *org0 = NULL, *org = NULL; size_t ret; + char *con_buf; - mutex_lock(&con_buf_mtx); + con_buf = (char *) __get_free_page(GFP_KERNEL); + if (!con_buf) + return -ENOMEM; pos = *ppos; @@ -394,19 +411,10 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) console_lock(); attr = (currcons & 128); - currcons = (currcons & 127); - - if (currcons == 0) { - currcons = fg_console; - viewed = 1; - } else { - currcons--; - viewed = 0; - } ret = -ENXIO; - if (!vc_cons_allocated(currcons)) + vc = vcs_vc(inode, &viewed); + if (!vc) goto unlock_out; - vc = vc_cons[currcons].d; size = vcs_size(inode); ret = -EINVAL; @@ -561,9 +569,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) unlock_out: console_unlock(); - - mutex_unlock(&con_buf_mtx); - + free_page((unsigned long) con_buf); return ret; } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index d5669ff72df4..798df6f89110 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2068,18 +2068,6 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) } } -/* This is a temporary buffer used to prepare a tty console write - * so that we can easily avoid touching user space while holding the - * console spinlock. It is allocated in con_init and is shared by - * this code and the vc_screen read/write tty calls. - * - * We have to allocate this statically in the kernel data section - * since console_init (and thus con_init) are called before any - * kernel memory allocation is available. - */ -char con_buf[CON_BUF_SIZE]; -DEFINE_MUTEX(con_buf_mtx); - /* is_double_width() is based on the wcwidth() implementation by * Markus Kuhn -- 2007-05-26 (Unicode 5.0) * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 6625cc1ab758..4d05e14ea60c 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -142,14 +142,6 @@ static inline bool vt_force_oops_output(struct vc_data *vc) return false; } -/* - * vc_screen.c shares this temporary buffer with the console write code so that - * we can easily avoid touching user space while holding the console spinlock. - */ - -#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE) -extern char con_buf[CON_BUF_SIZE]; -extern struct mutex con_buf_mtx; extern char vt_dont_switch; extern int default_utf8; extern int global_cursor_default; -- cgit v1.2.2 From b68f23b24e0013d489aaa986da0210feea00d4c1 Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Mon, 7 Feb 2011 12:02:27 -0800 Subject: serial: ifx6x60: fixed call to tty_port_init The port ops must be set AFTER calling port init as that function zeroes the structure Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index c42de7152eea..972c04d8c1a3 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -798,8 +798,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) goto error_ret; } - pport->ops = &ifx_tty_port_ops; tty_port_init(pport); + pport->ops = &ifx_tty_port_ops; ifx_dev->minor = IFX_SPI_TTY_ID; ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, &ifx_dev->spi_dev->dev); -- cgit v1.2.2 From 5fc324952049b2e6d16a54ef89afee25611ca476 Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Mon, 7 Feb 2011 12:02:28 -0800 Subject: serial: ifx6x60: dma_alloc_coherent must use parent dev This driver is a SPI protocol driver and has no DMA ops associated with the device so the call will fail. Furthermore, the DMA allocation made here will be used by the SPI controller driver (parent dev) so it makes sense to pass that device instead. Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 972c04d8c1a3..bb2ff206d0ab 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -998,7 +998,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ifx_dev->spi_slave_cts = 0; /*initialize transfer and dma buffers */ - ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, IFX_SPI_TRANSFER_SIZE, &ifx_dev->tx_bus, GFP_KERNEL); @@ -1007,7 +1007,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ret = -ENOMEM; goto error_ret; } - ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, IFX_SPI_TRANSFER_SIZE, &ifx_dev->rx_bus, GFP_KERNEL); -- cgit v1.2.2 From f089140ea760b42542389c96f9a54d3076696b2c Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Mon, 7 Feb 2011 12:02:29 -0800 Subject: serial: ifx6x60: changed internal bpw from boolean to int driver should support 32bit SPI transfers. The boolean variable only allowed 8/16. Changed to support 8/16/32 for future enabling of 32 bpw. Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index bb2ff206d0ab..9161cabaec37 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -76,7 +76,7 @@ static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); /* local variables */ -static int spi_b16 = 1; /* 8 or 16 bit word length */ +static int spi_bpw = 16; /* 8, 16 or 32 bit word length */ static struct tty_driver *tty_drv; static struct ifx_spi_device *saved_ifx_dev; static struct lock_class_key ifx_spi_key; @@ -724,7 +724,7 @@ static void ifx_spi_io(unsigned long data) ifx_dev->spi_xfer.cs_change = 0; ifx_dev->spi_xfer.speed_hz = 12500000; /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8; + ifx_dev->spi_xfer.bits_per_word = spi_bpw; ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; -- cgit v1.2.2 From 1b79b440576b80bace7b6fa012a57ed91d763b5f Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Mon, 7 Feb 2011 12:02:30 -0800 Subject: serial: ifx6x60: set SPI max_speed_hz based on platform type Platforms containing the 6260 can run up to 25Mhz. For these platforms set max_speed_hz to 25Mhz. Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 9161cabaec37..766f0c3aabcf 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -722,7 +722,7 @@ static void ifx_spi_io(unsigned long data) /* note len is BYTES, not transfers */ ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; ifx_dev->spi_xfer.cs_change = 0; - ifx_dev->spi_xfer.speed_hz = 12500000; + ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; /* ifx_dev->spi_xfer.speed_hz = 390625; */ ifx_dev->spi_xfer.bits_per_word = spi_bpw; @@ -992,6 +992,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ifx_dev->modem = pl_data->modem_type; ifx_dev->use_dma = pl_data->use_dma; ifx_dev->max_hz = pl_data->max_hz; + spi->max_speed_hz = ifx_dev->max_hz; /* ensure SPI protocol flags are initialized to enable transfer */ ifx_dev->spi_more = 0; -- cgit v1.2.2 From 2aff8d90a073e5a07e1ff5a94779d6a21fb72dd2 Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Mon, 7 Feb 2011 12:02:31 -0800 Subject: serial: ifx6x60: probe routine needs to call spi_setup The probe routine should call spi_setup() to configure the SPI bus so it can properly communicate with the device. E.g. the device operates in SPI mode 1. Called spi_setup to configure SPI mode, max_speed_hz, and bpw Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 766f0c3aabcf..59e9cb87b7de 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -67,6 +67,7 @@ #define IFX_SPI_MORE_MASK 0x10 #define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ #define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ +#define IFX_SPI_MODE SPI_MODE_1 #define IFX_SPI_TTY_ID 0 #define IFX_SPI_TIMEOUT_SEC 2 #define IFX_SPI_HEADER_0 (-1) @@ -992,7 +993,15 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ifx_dev->modem = pl_data->modem_type; ifx_dev->use_dma = pl_data->use_dma; ifx_dev->max_hz = pl_data->max_hz; + /* initialize spi mode, etc */ spi->max_speed_hz = ifx_dev->max_hz; + spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode); + spi->bits_per_word = spi_bpw; + ret = spi_setup(spi); + if (ret) { + dev_err(&spi->dev, "SPI setup wasn't successful %d", ret); + return -ENODEV; + } /* ensure SPI protocol flags are initialized to enable transfer */ ifx_dev->spi_more = 0; -- cgit v1.2.2 From 8115be01462f8af2dc22dd65dd28268bb9b8bff6 Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Mon, 7 Feb 2011 12:02:32 -0800 Subject: serial: ifx6x60: minor cleanup renamed spi_driver variable to not be h/w specific set driver name to use DRVNAME define removed commented-out define Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 8 ++++---- drivers/tty/serial/ifx6x60.h | 2 -- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 59e9cb87b7de..b68b96f53e6c 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1333,9 +1333,9 @@ static const struct spi_device_id ifx_id_table[] = { MODULE_DEVICE_TABLE(spi, ifx_id_table); /* spi operations */ -static const struct spi_driver ifx_spi_driver_6160 = { +static const struct spi_driver ifx_spi_driver = { .driver = { - .name = "ifx6160", + .name = DRVNAME, .bus = &spi_bus_type, .pm = &ifx_spi_pm, .owner = THIS_MODULE}, @@ -1357,7 +1357,7 @@ static void __exit ifx_spi_exit(void) { /* unregister */ tty_unregister_driver(tty_drv); - spi_unregister_driver((void *)&ifx_spi_driver_6160); + spi_unregister_driver((void *)&ifx_spi_driver); } /** @@ -1399,7 +1399,7 @@ static int __init ifx_spi_init(void) return result; } - result = spi_register_driver((void *)&ifx_spi_driver_6160); + result = spi_register_driver((void *)&ifx_spi_driver); if (result) { pr_err("%s: spi_register_driver failed(%d)", DRVNAME, result); diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h index 0ec39b58ccc4..e8464baf9e75 100644 --- a/drivers/tty/serial/ifx6x60.h +++ b/drivers/tty/serial/ifx6x60.h @@ -29,8 +29,6 @@ #define DRVNAME "ifx6x60" #define TTYNAME "ttyIFX" -/* #define IFX_THROTTLE_CODE */ - #define IFX_SPI_MAX_MINORS 1 #define IFX_SPI_TRANSFER_SIZE 2048 #define IFX_SPI_FIFO_SIZE 4096 -- cgit v1.2.2 From 95926d2db6256e08d06b753752a0d903a0580acc Mon Sep 17 00:00:00 2001 From: Yin Kangkai Date: Wed, 9 Feb 2011 11:34:20 +0800 Subject: serial: also set the uartclk value in resume after goes to highspeed For any reason if the NS16550A was not work in high speed mode (e.g. we hold NS16550A from going to high speed mode in autoconfig_16550a()), now we are resume from suspend, we should also set the uartclk to the correct value. Otherwise it is still the old 1843200 and that will bring issues. CC: Greg Kroah-Hartman CC: David Woodhouse CC: linux-kernel@vger.kernel.org CC: stable@kernel.org Signed-off-by: Yin Kangkai Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index 3975df6f7fdb..c10a6a909c76 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -3036,6 +3036,7 @@ void serial8250_resume_port(int line) serial_outp(up, 0x04, tmp); serial_outp(up, UART_LCR, 0); + up->port.uartclk = 921600*16; } uart_resume_port(&serial8250_reg, &up->port); } -- cgit v1.2.2 From 0d0389e5414c8950b1613e8bdc74289cde3d6d98 Mon Sep 17 00:00:00 2001 From: Yin Kangkai Date: Wed, 9 Feb 2011 11:35:18 +0800 Subject: serial: change the divisor latch only when prescalar actually changed In 8250.c original ns16550 autoconfig code, we change the divisor latch when we goto to high speed mode, we're assuming the previous speed is legacy. This some times is not true. For example in a system with both CONFIG_SERIAL_8250 and CONFIG_SERIAL_8250_PNP set, in this case, the code (autoconfig) will be called twice, one in serial8250_init/probe() and the other is from serial_pnp_probe. When serial_pnp_probe calls the autoconfig for NS16550A, it's already in high speed mode, change the divisor latch (quot << 3) in this case will make the UART console garbled. CC: Greg Kroah-Hartman CC: David Woodhouse CC: linux-kernel@vger.kernel.org CC: stable@kernel.org Signed-off-by: Yin Kangkai Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index c10a6a909c76..b3b881bc4712 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up) return 0; } +static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) +{ + unsigned char status; + + status = serial_in(up, 0x04); /* EXCR2 */ +#define PRESL(x) ((x) & 0x30) + if (PRESL(status) == 0x10) { + /* already in high speed mode */ + return 0; + } else { + status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, status); + } + return 1; +} + /* * We know that the chip has FIFOs. Does it have an EFR? The * EFR is located in the same register position as the IIR and @@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up) quot = serial_dl_read(up); quot <<= 3; - status1 = serial_in(up, 0x04); /* EXCR2 */ - status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, status1); - - serial_dl_write(up, quot); + if (ns16550a_goto_highspeed(up)) + serial_dl_write(up, quot); serial_outp(up, UART_LCR, 0); @@ -3025,15 +3038,10 @@ void serial8250_resume_port(int line) struct uart_8250_port *up = &serial8250_ports[line]; if (up->capabilities & UART_NATSEMI) { - unsigned char tmp; - /* Ensure it's still in high speed mode */ serial_outp(up, UART_LCR, 0xE0); - tmp = serial_in(up, 0x04); /* EXCR2 */ - tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, tmp); + ns16550a_goto_highspeed(up); serial_outp(up, UART_LCR, 0); up->port.uartclk = 921600*16; -- cgit v1.2.2 From daaf6ff42d12c89f179868387c0107db6625f0f3 Mon Sep 17 00:00:00 2001 From: Niranjana Vishwanathapura Date: Wed, 9 Feb 2011 11:16:34 -0800 Subject: tty: Add msm_smd_tty driver msm_smd_tty driver provides tty device interface to 'DS' and 'GPSNMEA' streaming SMD ports. Cc: Brian Swetland Signed-off-by: Niranjana Vishwanathapura Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 9 ++ drivers/tty/serial/Makefile | 1 + drivers/tty/serial/msm_smd_tty.c | 236 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+) create mode 100644 drivers/tty/serial/msm_smd_tty.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index aaedbad93a75..90d939a4ee5d 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1600,4 +1600,13 @@ config SERIAL_PCH_UART Output Hub) which is for IVI(In-Vehicle Infotainment) use. ML7213 is companion chip for Intel Atom E6xx series. ML7213 is completely compatible for Intel EG20T PCH. + +config SERIAL_MSM_SMD + bool "Enable tty device interface for some SMD ports" + default n + depends on MSM_SMD + help + Enables userspace clients to read and write to some streaming SMD + ports via tty device interface for MSM chipset. + endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 8ea92e9c73b0..0c6aefb55acf 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -92,3 +92,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o +obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c new file mode 100644 index 000000000000..beeff1e86093 --- /dev/null +++ b/drivers/tty/serial/msm_smd_tty.c @@ -0,0 +1,236 @@ +/* drivers/tty/serial/msm_smd_tty.c + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#define MAX_SMD_TTYS 32 + +struct smd_tty_info { + struct tty_port port; + smd_channel_t *ch; +}; + +struct smd_tty_channel_desc { + int id; + const char *name; +}; + +static struct smd_tty_info smd_tty[MAX_SMD_TTYS]; + +static const struct smd_tty_channel_desc smd_default_tty_channels[] = { + { .id = 0, .name = "SMD_DS" }, + { .id = 27, .name = "SMD_GPSNMEA" }, +}; + +static const struct smd_tty_channel_desc *smd_tty_channels = + smd_default_tty_channels; +static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels); + +static void smd_tty_notify(void *priv, unsigned event) +{ + unsigned char *ptr; + int avail; + struct smd_tty_info *info = priv; + struct tty_struct *tty; + + if (event != SMD_EVENT_DATA) + return; + + tty = tty_port_tty_get(&info->port); + if (!tty) + return; + + for (;;) { + if (test_bit(TTY_THROTTLED, &tty->flags)) + break; + avail = smd_read_avail(info->ch); + if (avail == 0) + break; + + avail = tty_prepare_flip_string(tty, &ptr, avail); + + if (smd_read(info->ch, ptr, avail) != avail) { + /* shouldn't be possible since we're in interrupt + ** context here and nobody else could 'steal' our + ** characters. + */ + pr_err("OOPS - smd_tty_buffer mismatch?!"); + } + + tty_flip_buffer_push(tty); + } + + /* XXX only when writable and necessary */ + tty_wakeup(tty); + tty_kref_put(tty); +} + +static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty) +{ + int i, res = 0; + int n = tty->index; + const char *name = NULL; + struct smd_tty_info *info = smd_tty + n; + + for (i = 0; i < smd_tty_channels_len; i++) { + if (smd_tty_channels[i].id == n) { + name = smd_tty_channels[i].name; + break; + } + } + if (!name) + return -ENODEV; + + if (info->ch) + smd_kick(info->ch); + else + res = smd_open(name, &info->ch, info, smd_tty_notify); + + if (!res) + tty->driver_data = info; + + return res; +} + +static void smd_tty_port_shutdown(struct tty_port *tport) +{ + struct smd_tty_info *info; + struct tty_struct *tty = tty_port_tty_get(tport); + + info = tty->driver_data; + if (info->ch) { + smd_close(info->ch); + info->ch = 0; + } + + tty->driver_data = 0; + tty_kref_put(tty); +} + +static int smd_tty_open(struct tty_struct *tty, struct file *f) +{ + struct smd_tty_info *info = smd_tty + tty->index; + + return tty_port_open(&info->port, tty, f); +} + +static void smd_tty_close(struct tty_struct *tty, struct file *f) +{ + struct smd_tty_info *info = tty->driver_data; + + tty_port_close(&info->port, tty, f); +} + +static int smd_tty_write(struct tty_struct *tty, + const unsigned char *buf, int len) +{ + struct smd_tty_info *info = tty->driver_data; + int avail; + + /* if we're writing to a packet channel we will + ** never be able to write more data than there + ** is currently space for + */ + avail = smd_write_avail(info->ch); + if (len > avail) + len = avail; + + return smd_write(info->ch, buf, len); +} + +static int smd_tty_write_room(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + return smd_write_avail(info->ch); +} + +static int smd_tty_chars_in_buffer(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + return smd_read_avail(info->ch); +} + +static void smd_tty_unthrottle(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + smd_kick(info->ch); +} + +static const struct tty_port_operations smd_tty_port_ops = { + .shutdown = smd_tty_port_shutdown, + .activate = smd_tty_port_activate, +}; + +static const struct tty_operations smd_tty_ops = { + .open = smd_tty_open, + .close = smd_tty_close, + .write = smd_tty_write, + .write_room = smd_tty_write_room, + .chars_in_buffer = smd_tty_chars_in_buffer, + .unthrottle = smd_tty_unthrottle, +}; + +static struct tty_driver *smd_tty_driver; + +static int __init smd_tty_init(void) +{ + int ret, i; + + smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS); + if (smd_tty_driver == 0) + return -ENOMEM; + + smd_tty_driver->owner = THIS_MODULE; + smd_tty_driver->driver_name = "smd_tty_driver"; + smd_tty_driver->name = "smd"; + smd_tty_driver->major = 0; + smd_tty_driver->minor_start = 0; + smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + smd_tty_driver->subtype = SERIAL_TYPE_NORMAL; + smd_tty_driver->init_termios = tty_std_termios; + smd_tty_driver->init_termios.c_iflag = 0; + smd_tty_driver->init_termios.c_oflag = 0; + smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; + smd_tty_driver->init_termios.c_lflag = 0; + smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(smd_tty_driver, &smd_tty_ops); + + ret = tty_register_driver(smd_tty_driver); + if (ret) + return ret; + + for (i = 0; i < smd_tty_channels_len; i++) { + tty_port_init(&smd_tty[smd_tty_channels[i].id].port); + smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops; + tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0); + } + + return 0; +} + +module_init(smd_tty_init); -- cgit v1.2.2 From 42bd7a4f68e7785dce656a379c3de0a74f5a4d84 Mon Sep 17 00:00:00 2001 From: Viktar Palstsiuk Date: Wed, 9 Feb 2011 15:26:13 +0100 Subject: atmel_serial: enable PPS support Enables PPS support in atmel serial driver to make PPS API working. Signed-off-by: Viktar Palstsiuk Signed-off-by: Nicolas Ferre Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 2a1d52fb4936..f119d1761106 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&port->lock, flags); } +static void atmel_set_ldisc(struct uart_port *port, int new) +{ + int line = port->line; + + if (line >= port->state->port.tty->driver->num) + return; + + if (port->state->port.tty->ldisc->ops->num == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + atmel_enable_ms(port); + } else { + port->flags &= ~UPF_HARDPPS_CD; + } +} + /* * Return string describing the specified port */ @@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = { .shutdown = atmel_shutdown, .flush_buffer = atmel_flush_buffer, .set_termios = atmel_set_termios, + .set_ldisc = atmel_set_ldisc, .type = atmel_type, .release_port = atmel_release_port, .request_port = atmel_request_port, -- cgit v1.2.2 From d637837583163a1a70331ce48097f697cac85e32 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 11 Feb 2011 15:39:28 +0100 Subject: tty,vt: fix VT_SETACTIVATE console switch using VT_SETACTIVATE ioctl for console switch did not work, since it put wrong param to the set_console function. Also ioctl returned misleading error, because of the missing break statement. I wonder anyone has ever used this one :). Signed-off-by: Jiri Olsa Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt_ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 6bcf05bf4978..9e9a901442a3 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -1010,8 +1010,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, if (ret) break; /* Commence switch and lock */ - set_console(arg); + set_console(vsa.console); } + break; } /* -- cgit v1.2.2 From e96fabd8791aad30a3c8a03919893ae3e2e3df25 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 9 Feb 2011 10:56:52 +0100 Subject: tty: serial: altera_uart: Handle pdev->id == -1 in altera_uart_remove Commit 6b5756f176568a710d008d3b478128fafb6707f0 introduced the possibility for pdev->id being -1 but the change was not done equally in altera_uart_remove. This patch fixes this. Acked-by: Anton Vorontsov Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/altera_uart.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 721216292a50..dee7a0eb6ea1 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -561,9 +561,15 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) static int __devexit altera_uart_remove(struct platform_device *pdev) { - struct uart_port *port = &altera_uart_ports[pdev->id].port; + struct uart_port *port; + int i = pdev->id; + if (i == -1) + i = 0; + + port = &altera_uart_ports[i].port; uart_remove_one_port(&altera_uart_driver, port); + return 0; } -- cgit v1.2.2 From 2780ad42f5fe6739882603c61c8decba6e50eaa2 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 9 Feb 2011 10:57:04 +0100 Subject: tty: serial: altera_uart: Use port->regshift to store bus shift Use the regshift member of struct uart_port to store the address stride from platform data. This way we can save one dereference per call of altera_uart_readl and altera_uart_writel. This also allows us to use the driver without platform data, which is needed for device tree support in the Nios2 port. Acked-by: Anton Vorontsov Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/altera_uart.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index dee7a0eb6ea1..3a573528555e 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -86,16 +86,12 @@ struct altera_uart { static u32 altera_uart_readl(struct uart_port *port, int reg) { - struct altera_uart_platform_uart *platp = port->private_data; - - return readl(port->membase + (reg << platp->bus_shift)); + return readl(port->membase + (reg << port->regshift)); } static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) { - struct altera_uart_platform_uart *platp = port->private_data; - - writel(dat, port->membase + (reg << platp->bus_shift)); + writel(dat, port->membase + (reg << port->regshift)); } static unsigned int altera_uart_tx_empty(struct uart_port *port) @@ -546,13 +542,17 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) if (!port->membase) return -ENOMEM; + if (platp) + port->regshift = platp->bus_shift; + else + port->regshift = 0; + port->line = i; port->type = PORT_ALTERA_UART; port->iotype = SERIAL_IO_MEM; port->uartclk = platp->uartclk; port->ops = &altera_uart_ops; port->flags = UPF_BOOT_AUTOCONF; - port->private_data = platp; uart_add_one_port(&altera_uart_driver, port); -- cgit v1.2.2 From adf9251fe9b87b5a50deebe489db2df8df4715fc Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 9 Feb 2011 10:58:29 +0100 Subject: MAINTAINERS: Add myself as a maintainer for altera_uart/altera_jtaguart Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 445537d46e7a..1eaeda66a525 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -465,6 +465,16 @@ M: Matt Turner L: linux-alpha@vger.kernel.org F: arch/alpha/ +ALTERA UART/JTAG UART SERIAL DRIVERS +M: Tobias Klauser +L: linux-serial@vger.kernel.org +L: nios2-dev@sopc.et.ntust.edu.tw (moderated for non-subscribers) +S: Maintained +F: drivers/tty/serial/altera_uart.c +F: drivers/tty/serial/altera_jtaguart.c +F: include/linux/altera_uart.h +F: include/linux/altera_jtaguart.h + AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER M: Thomas Dahlmann L: linux-geode@lists.infradead.org (moderated for non-subscribers) -- cgit v1.2.2 From 60b33c133ca0b7c0b6072c87234b63fee6e80558 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 14 Feb 2011 16:26:14 +0000 Subject: tiocmget: kill off the passing of the struct file We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/amiserial.c | 2 +- drivers/char/cyclades.c | 2 +- drivers/char/epca.c | 4 ++-- drivers/char/ip2/ip2main.c | 4 ++-- drivers/char/isicom.c | 2 +- drivers/char/istallion.c | 2 +- drivers/char/moxa.c | 4 ++-- drivers/char/mxser.c | 2 +- drivers/char/nozomi.c | 2 +- drivers/char/pcmcia/ipwireless/tty.c | 2 +- drivers/char/pcmcia/synclink_cs.c | 4 ++-- drivers/char/riscom8.c | 2 +- drivers/char/rocket.c | 2 +- drivers/char/serial167.c | 2 +- drivers/char/specialix.c | 2 +- drivers/char/stallion.c | 2 +- drivers/char/sx.c | 2 +- drivers/char/synclink.c | 4 ++-- drivers/char/synclink_gt.c | 4 ++-- drivers/char/synclinkmp.c | 4 ++-- drivers/isdn/gigaset/interface.c | 4 ++-- drivers/isdn/i4l/isdn_tty.c | 2 +- drivers/mmc/card/sdio_uart.c | 2 +- drivers/net/usb/hso.c | 2 +- drivers/net/wan/pc300_tty.c | 4 ++-- drivers/staging/quatech_usb2/quatech_usb2.c | 2 +- drivers/staging/serqt_usb2/serqt_usb2.c | 6 +++--- drivers/tty/hvc/hvsi.c | 2 +- drivers/tty/n_gsm.c | 2 +- drivers/tty/serial/68360serial.c | 2 +- drivers/tty/serial/crisv10.c | 2 +- drivers/tty/serial/ifx6x60.c | 2 +- drivers/tty/serial/serial_core.c | 6 ++---- drivers/tty/tty_io.c | 6 +++--- drivers/usb/class/cdc-acm.c | 2 +- drivers/usb/serial/ark3116.c | 2 +- drivers/usb/serial/belkin_sa.c | 4 ++-- drivers/usb/serial/ch341.c | 2 +- drivers/usb/serial/cp210x.c | 4 ++-- drivers/usb/serial/cypress_m8.c | 4 ++-- drivers/usb/serial/digi_acceleport.c | 4 ++-- drivers/usb/serial/ftdi_sio.c | 4 ++-- drivers/usb/serial/io_edgeport.c | 4 ++-- drivers/usb/serial/io_ti.c | 2 +- drivers/usb/serial/iuu_phoenix.c | 2 +- drivers/usb/serial/keyspan.c | 2 +- drivers/usb/serial/keyspan.h | 3 +-- drivers/usb/serial/keyspan_pda.c | 2 +- drivers/usb/serial/kl5kusb105.c | 4 ++-- drivers/usb/serial/kobil_sct.c | 4 ++-- drivers/usb/serial/mct_u232.c | 4 ++-- drivers/usb/serial/mos7720.c | 4 ++-- drivers/usb/serial/mos7840.c | 2 +- drivers/usb/serial/opticon.c | 2 +- drivers/usb/serial/oti6858.c | 4 ++-- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/sierra.c | 2 +- drivers/usb/serial/spcp8x5.c | 2 +- drivers/usb/serial/ssu100.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 4 ++-- drivers/usb/serial/usb-serial.c | 4 ++-- drivers/usb/serial/usb-wwan.h | 2 +- drivers/usb/serial/usb_wwan.c | 2 +- drivers/usb/serial/whiteheat.c | 4 ++-- include/linux/tty_driver.h | 2 +- include/linux/usb/serial.h | 2 +- include/net/irda/ircomm_tty.h | 2 +- net/bluetooth/rfcomm/tty.c | 2 +- net/irda/ircomm/ircomm_tty_ioctl.c | 4 ++-- 69 files changed, 98 insertions(+), 101 deletions(-) diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 6ee3348bc3e4..bc67e6839059 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1194,7 +1194,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value) } -static int rs_tiocmget(struct tty_struct *tty, struct file *file) +static int rs_tiocmget(struct tty_struct *tty) { struct async_struct * info = tty->driver_data; unsigned char control, status; diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 4f152c28f40e..e7945ddacd18 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -2429,7 +2429,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) return put_user(result, (unsigned long __user *)value); } -static int cy_tiocmget(struct tty_struct *tty, struct file *file) +static int cy_tiocmget(struct tty_struct *tty) { struct cyclades_port *info = tty->driver_data; struct cyclades_card *card; diff --git a/drivers/char/epca.c b/drivers/char/epca.c index d9df46aa0fba..ecf6f0a889fc 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -1982,7 +1982,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file, return 0; } -static int pc_tiocmget(struct tty_struct *tty, struct file *file) +static int pc_tiocmget(struct tty_struct *tty) { struct channel *ch = tty->driver_data; struct board_chan __iomem *bc; @@ -2074,7 +2074,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, return -EINVAL; switch (cmd) { case TIOCMODG: - mflag = pc_tiocmget(tty, file); + mflag = pc_tiocmget(tty); if (put_user(mflag, (unsigned long __user *)argp)) return -EFAULT; break; diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index c3a025356b8b..476cd087118e 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -181,7 +181,7 @@ static void ip2_unthrottle(PTTY); static void ip2_stop(PTTY); static void ip2_start(PTTY); static void ip2_hangup(PTTY); -static int ip2_tiocmget(struct tty_struct *tty, struct file *file); +static int ip2_tiocmget(struct tty_struct *tty); static int ip2_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int ip2_get_icount(struct tty_struct *tty, @@ -2038,7 +2038,7 @@ ip2_stop ( PTTY tty ) /* Device Ioctl Section */ /******************************************************************************/ -static int ip2_tiocmget(struct tty_struct *tty, struct file *file) +static int ip2_tiocmget(struct tty_struct *tty) { i2ChanStrPtr pCh = DevTable[tty->index]; #ifdef ENABLE_DSSNOW diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index c27e9d21fea9..836370bc04c2 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1065,7 +1065,7 @@ static int isicom_send_break(struct tty_struct *tty, int length) return 0; } -static int isicom_tiocmget(struct tty_struct *tty, struct file *file) +static int isicom_tiocmget(struct tty_struct *tty) { struct isi_port *port = tty->driver_data; /* just send the port status */ diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 7c6de4c92458..7843a847b76a 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -1501,7 +1501,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s /*****************************************************************************/ -static int stli_tiocmget(struct tty_struct *tty, struct file *file) +static int stli_tiocmget(struct tty_struct *tty) { struct stliport *portp = tty->driver_data; struct stlibrd *brdp; diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 107b0bd58d19..fdf069bb702f 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -199,7 +199,7 @@ static void moxa_set_termios(struct tty_struct *, struct ktermios *); static void moxa_stop(struct tty_struct *); static void moxa_start(struct tty_struct *); static void moxa_hangup(struct tty_struct *); -static int moxa_tiocmget(struct tty_struct *tty, struct file *file); +static int moxa_tiocmget(struct tty_struct *tty); static int moxa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void moxa_poll(unsigned long); @@ -1257,7 +1257,7 @@ static int moxa_chars_in_buffer(struct tty_struct *tty) return chars; } -static int moxa_tiocmget(struct tty_struct *tty, struct file *file) +static int moxa_tiocmget(struct tty_struct *tty) { struct moxa_port *ch = tty->driver_data; int flag = 0, dtr, rts; diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index dd9d75351cd6..4d2f03ec06cd 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1320,7 +1320,7 @@ static int mxser_get_lsr_info(struct mxser_port *info, return put_user(result, value); } -static int mxser_tiocmget(struct tty_struct *tty, struct file *file) +static int mxser_tiocmget(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; unsigned char control, status; diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 294d03e8c61a..0e1dff2ffb1e 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1750,7 +1750,7 @@ static int ntty_write_room(struct tty_struct *tty) } /* Gets io control parameters */ -static int ntty_tiocmget(struct tty_struct *tty, struct file *file) +static int ntty_tiocmget(struct tty_struct *tty) { const struct port *port = tty->driver_data; const struct ctrl_dl *ctrl_dl = &port->ctrl_dl; diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c index f5eb28b6cb0f..7d2ef4909a73 100644 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ b/drivers/char/pcmcia/ipwireless/tty.c @@ -395,7 +395,7 @@ static int set_control_lines(struct ipw_tty *tty, unsigned int set, return 0; } -static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file) +static int ipw_tiocmget(struct tty_struct *linux_tty) { struct ipw_tty *tty = linux_tty->driver_data; /* FIXME: Exactly how is the tty object locked here .. */ diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index eaa41992fbe2..7b68ba6609fe 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -418,7 +418,7 @@ static void bh_status(MGSLPC_INFO *info); /* * ioctl handlers */ -static int tiocmget(struct tty_struct *tty, struct file *file); +static int tiocmget(struct tty_struct *tty); static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount); @@ -2114,7 +2114,7 @@ static int modem_input_wait(MGSLPC_INFO *info,int arg) /* return the state of the serial control and status signals */ -static int tiocmget(struct tty_struct *tty, struct file *file) +static int tiocmget(struct tty_struct *tty) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; unsigned int result; diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index af4de1fe8445..5d0c98456c93 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -1086,7 +1086,7 @@ static int rc_chars_in_buffer(struct tty_struct *tty) return port->xmit_cnt; } -static int rc_tiocmget(struct tty_struct *tty, struct file *file) +static int rc_tiocmget(struct tty_struct *tty) { struct riscom_port *port = tty->driver_data; struct riscom_board *bp; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 3e4e73a0d7c1..75e98efbc8e9 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -1169,7 +1169,7 @@ static int sGetChanRI(CHANNEL_T * ChP) * Returns the state of the serial modem control lines. These next 2 functions * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs. */ -static int rp_tiocmget(struct tty_struct *tty, struct file *file) +static int rp_tiocmget(struct tty_struct *tty) { struct r_port *info = tty->driver_data; unsigned int control, result, ChanStatus; diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 748c3b0ecd89..fda90643ead7 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1308,7 +1308,7 @@ check_and_exit: return startup(info); } /* set_serial_info */ -static int cy_tiocmget(struct tty_struct *tty, struct file *file) +static int cy_tiocmget(struct tty_struct *tty) { struct cyclades_port *info = tty->driver_data; int channel; diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index c2bca3f25ef3..bfecfbef0895 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1737,7 +1737,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty) return port->xmit_cnt; } -static int sx_tiocmget(struct tty_struct *tty, struct file *file) +static int sx_tiocmget(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 461a5a045517..8c2bf3fb5b89 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -1094,7 +1094,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp /*****************************************************************************/ -static int stl_tiocmget(struct tty_struct *tty, struct file *file) +static int stl_tiocmget(struct tty_struct *tty) { struct stlport *portp; diff --git a/drivers/char/sx.c b/drivers/char/sx.c index a786326cea2f..f46214e60d0c 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1873,7 +1873,7 @@ static int sx_break(struct tty_struct *tty, int flag) return 0; } -static int sx_tiocmget(struct tty_struct *tty, struct file *file) +static int sx_tiocmget(struct tty_struct *tty) { struct sx_port *port = tty->driver_data; return sx_getsignals(port); diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 3a6824f12be2..d359e092904a 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -823,7 +823,7 @@ static isr_dispatch_func UscIsrTable[7] = /* * ioctl call handlers */ -static int tiocmget(struct tty_struct *tty, struct file *file); +static int tiocmget(struct tty_struct *tty); static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount @@ -2846,7 +2846,7 @@ static int modem_input_wait(struct mgsl_struct *info,int arg) /* return the state of the serial control and status signals */ -static int tiocmget(struct tty_struct *tty, struct file *file) +static int tiocmget(struct tty_struct *tty) { struct mgsl_struct *info = tty->driver_data; unsigned int result; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index d01fffeac951..f18ab8af0e1c 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -512,7 +512,7 @@ static int tx_abort(struct slgt_info *info); static int rx_enable(struct slgt_info *info, int enable); static int modem_input_wait(struct slgt_info *info,int arg); static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty, struct file *file); +static int tiocmget(struct tty_struct *tty); static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int set_break(struct tty_struct *tty, int break_state); @@ -3195,7 +3195,7 @@ static int modem_input_wait(struct slgt_info *info,int arg) /* * return state of serial control and status signals */ -static int tiocmget(struct tty_struct *tty, struct file *file) +static int tiocmget(struct tty_struct *tty) { struct slgt_info *info = tty->driver_data; unsigned int result; diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 2f9eb4b0dec1..5900213ae75b 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -546,7 +546,7 @@ static int tx_abort(SLMP_INFO *info); static int rx_enable(SLMP_INFO *info, int enable); static int modem_input_wait(SLMP_INFO *info,int arg); static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty, struct file *file); +static int tiocmget(struct tty_struct *tty); static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int set_break(struct tty_struct *tty, int break_state); @@ -3207,7 +3207,7 @@ static int modem_input_wait(SLMP_INFO *info,int arg) /* return the state of the serial control and status signals */ -static int tiocmget(struct tty_struct *tty, struct file *file) +static int tiocmget(struct tty_struct *tty) { SLMP_INFO *info = tty->driver_data; unsigned int result; diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index bb710d16a526..e1a7c14f5f1d 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -122,7 +122,7 @@ static int if_chars_in_buffer(struct tty_struct *tty); static void if_throttle(struct tty_struct *tty); static void if_unthrottle(struct tty_struct *tty); static void if_set_termios(struct tty_struct *tty, struct ktermios *old); -static int if_tiocmget(struct tty_struct *tty, struct file *file); +static int if_tiocmget(struct tty_struct *tty); static int if_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int if_write(struct tty_struct *tty, @@ -280,7 +280,7 @@ static int if_ioctl(struct tty_struct *tty, struct file *file, return retval; } -static int if_tiocmget(struct tty_struct *tty, struct file *file) +static int if_tiocmget(struct tty_struct *tty) { struct cardstate *cs; int retval; diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index c463162843ba..ba6c2f124b58 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -1345,7 +1345,7 @@ isdn_tty_get_lsr_info(modem_info * info, uint __user * value) static int -isdn_tty_tiocmget(struct tty_struct *tty, struct file *file) +isdn_tty_tiocmget(struct tty_struct *tty) { modem_info *info = (modem_info *) tty->driver_data; u_char control, status; diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index a0716967b7c8..86bb04d821b1 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -956,7 +956,7 @@ static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state) return 0; } -static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) +static int sdio_uart_tiocmget(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; int result; diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index bed8fcedff49..7c68c456c035 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1656,7 +1656,7 @@ static int hso_get_count(struct tty_struct *tty, } -static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file) +static int hso_serial_tiocmget(struct tty_struct *tty) { int retval; struct hso_serial *serial = get_serial_by_tty(tty); diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c index 515d9b8af01e..d999e54a7730 100644 --- a/drivers/net/wan/pc300_tty.c +++ b/drivers/net/wan/pc300_tty.c @@ -133,7 +133,7 @@ static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char); static int pc300_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); -static int pc300_tiocmget(struct tty_struct *, struct file *); +static int pc300_tiocmget(struct tty_struct *); /* functions called by PC300 driver */ void cpc_tty_init(pc300dev_t *dev); @@ -570,7 +570,7 @@ static int pc300_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int pc300_tiocmget(struct tty_struct *tty, struct file *file) +static int pc300_tiocmget(struct tty_struct *tty) { unsigned int result; unsigned char status; diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index ed58f482c963..1e50292aef74 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -1078,7 +1078,7 @@ static void qt2_set_termios(struct tty_struct *tty, } } -static int qt2_tiocmget(struct tty_struct *tty, struct file *file) +static int qt2_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 27841ef6a568..56ded56db7b4 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -1383,7 +1383,7 @@ static void qt_break(struct tty_struct *tty, int break_state) static inline int qt_real_tiocmget(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file, struct usb_serial *serial) + struct usb_serial *serial) { u8 mcr; @@ -1462,7 +1462,7 @@ static inline int qt_real_tiocmset(struct tty_struct *tty, return 0; } -static int qt_tiocmget(struct tty_struct *tty, struct file *file) +static int qt_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = get_usb_serial(port, __func__); @@ -1480,7 +1480,7 @@ static int qt_tiocmget(struct tty_struct *tty, struct file *file) dbg("%s - port %d\n", __func__, port->number); dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding); - retval = qt_real_tiocmget(tty, port, file, serial); + retval = qt_real_tiocmget(tty, port, serial); spin_unlock_irqrestore(&qt_port->lock, flags); return retval; diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index 67a75a502c01..55293105a56c 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -1095,7 +1095,7 @@ static void hvsi_unthrottle(struct tty_struct *tty) h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE); } -static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) +static int hvsi_tiocmget(struct tty_struct *tty) { struct hvsi_struct *hp = tty->driver_data; diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 44b8412a04e8..97e3d509ff82 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2648,7 +2648,7 @@ static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout) to do here */ } -static int gsmtty_tiocmget(struct tty_struct *tty, struct file *filp) +static int gsmtty_tiocmget(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; return dlci->modem_rx; diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c index 88b13356ec10..2a52cf14ce50 100644 --- a/drivers/tty/serial/68360serial.c +++ b/drivers/tty/serial/68360serial.c @@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value) } #endif -static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) +static int rs_360_tiocmget(struct tty_struct *tty) { ser_info_t *info = (ser_info_t *)tty->driver_data; unsigned int result = 0; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index bcc31f2140ac..8cc5c0224b25 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3614,7 +3614,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file, } static int -rs_tiocmget(struct tty_struct *tty, struct file *file) +rs_tiocmget(struct tty_struct *tty) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned int result; diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index b68b96f53e6c..4d26d39ec344 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -245,7 +245,7 @@ static void ifx_spi_timeout(unsigned long arg) * Map the signal state into Linux modem flags and report the value * in Linux terms */ -static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) +static int ifx_spi_tiocmget(struct tty_struct *tty) { unsigned int value; struct ifx_spi_device *ifx_dev = tty->driver_data; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 20563c509b21..53e490e47560 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -905,7 +905,7 @@ static int uart_get_lsr_info(struct tty_struct *tty, return put_user(result, value); } -static int uart_tiocmget(struct tty_struct *tty, struct file *file) +static int uart_tiocmget(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct tty_port *port = &state->port; @@ -913,10 +913,8 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file) int result = -EIO; mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { + if (!(tty->flags & (1 << TTY_IO_ERROR))) { result = uport->mctrl; - spin_lock_irq(&uport->lock); result |= uport->ops->get_mctrl(uport); spin_unlock_irq(&uport->lock); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 0065da4b11c1..fde5a4dae3dd 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2465,12 +2465,12 @@ out: * Locking: none (up to the driver) */ -static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p) +static int tty_tiocmget(struct tty_struct *tty, int __user *p) { int retval = -EINVAL; if (tty->ops->tiocmget) { - retval = tty->ops->tiocmget(tty, file); + retval = tty->ops->tiocmget(tty); if (retval >= 0) retval = put_user(retval, p); @@ -2655,7 +2655,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return send_break(tty, arg ? arg*100 : 250); case TIOCMGET: - return tty_tiocmget(tty, file, p); + return tty_tiocmget(tty, p); case TIOCMSET: case TIOCMBIC: case TIOCMBIS: diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d6ede989ff22..2ae996b7ce7b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -776,7 +776,7 @@ static int acm_tty_break_ctl(struct tty_struct *tty, int state) return retval; } -static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file) +static int acm_tty_tiocmget(struct tty_struct *tty) { struct acm *acm = tty->driver_data; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 8f1d4fb19d24..35b610aa3f92 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -485,7 +485,7 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file, return -ENOIOCTLCMD; } -static int ark3116_tiocmget(struct tty_struct *tty, struct file *file) +static int ark3116_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ark3116_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 36df35295db2..48fb3bad3cd6 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -100,7 +100,7 @@ static void belkin_sa_process_read_urb(struct urb *urb); static void belkin_sa_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old); static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state); -static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file); +static int belkin_sa_tiocmget(struct tty_struct *tty); static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); @@ -497,7 +497,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state) dev_err(&port->dev, "Set break_ctl %d\n", break_state); } -static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file) +static int belkin_sa_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct belkin_sa_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 7b8815ddf368..aa0962b72f4c 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -572,7 +572,7 @@ static int ch341_ioctl(struct tty_struct *tty, struct file *file, return -ENOIOCTLCMD; } -static int ch341_tiocmget(struct tty_struct *tty, struct file *file) +static int ch341_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ch341_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 735ea03157ab..b3873815035c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -41,7 +41,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); -static int cp210x_tiocmget(struct tty_struct *, struct file *); +static int cp210x_tiocmget(struct tty_struct *); static int cp210x_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, @@ -742,7 +742,7 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on) cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS); } -static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) +static int cp210x_tiocmget (struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned int control; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 2edf238b00b9..9c96cff691fd 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -173,7 +173,7 @@ static int cypress_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int cypress_tiocmget(struct tty_struct *tty, struct file *file); +static int cypress_tiocmget(struct tty_struct *tty); static int cypress_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int cypress_chars_in_buffer(struct tty_struct *tty); @@ -864,7 +864,7 @@ static int cypress_write_room(struct tty_struct *tty) } -static int cypress_tiocmget(struct tty_struct *tty, struct file *file) +static int cypress_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 666e5a6edd82..08da46cb5825 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -445,7 +445,7 @@ static void digi_rx_unthrottle(struct tty_struct *tty); static void digi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static void digi_break_ctl(struct tty_struct *tty, int break_state); -static int digi_tiocmget(struct tty_struct *tty, struct file *file); +static int digi_tiocmget(struct tty_struct *tty); static int digi_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -1118,7 +1118,7 @@ static void digi_break_ctl(struct tty_struct *tty, int break_state) } -static int digi_tiocmget(struct tty_struct *tty, struct file *file) +static int digi_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 4787c0cd063f..281d18141051 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -856,7 +856,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size); static void ftdi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int ftdi_tiocmget(struct tty_struct *tty, struct file *file); +static int ftdi_tiocmget(struct tty_struct *tty); static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int ftdi_ioctl(struct tty_struct *tty, struct file *file, @@ -2149,7 +2149,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } } -static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) +static int ftdi_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index cd769ef24f8a..e8fe4dcf72f0 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -219,7 +219,7 @@ static void edge_set_termios(struct tty_struct *tty, static int edge_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static void edge_break(struct tty_struct *tty, int break_state); -static int edge_tiocmget(struct tty_struct *tty, struct file *file); +static int edge_tiocmget(struct tty_struct *tty); static int edge_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int edge_get_icount(struct tty_struct *tty, @@ -1599,7 +1599,7 @@ static int edge_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int edge_tiocmget(struct tty_struct *tty, struct file *file) +static int edge_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 22506b095c4f..7cb9f5cb91f3 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2477,7 +2477,7 @@ static int edge_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int edge_tiocmget(struct tty_struct *tty, struct file *file) +static int edge_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 99b97c04896f..1d96142f135a 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -179,7 +179,7 @@ static int iuu_tiocmset(struct tty_struct *tty, struct file *file, * When no card , the reader respond with TIOCM_CD * This is known as CD autodetect mechanism */ -static int iuu_tiocmget(struct tty_struct *tty, struct file *file) +static int iuu_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct iuu_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 0791778a66f3..1beebbb7a20a 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -301,7 +301,7 @@ static void keyspan_set_termios(struct tty_struct *tty, keyspan_send_setup(port, 0); } -static int keyspan_tiocmget(struct tty_struct *tty, struct file *file) +static int keyspan_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index ce134dc28ddf..5e5fc71e68df 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -58,8 +58,7 @@ static void keyspan_set_termios (struct tty_struct *tty, struct ktermios *old); static void keyspan_break_ctl (struct tty_struct *tty, int break_state); -static int keyspan_tiocmget (struct tty_struct *tty, - struct file *file); +static int keyspan_tiocmget (struct tty_struct *tty); static int keyspan_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 554a8693a463..49ad2baf77cd 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -457,7 +457,7 @@ static int keyspan_pda_set_modem_info(struct usb_serial *serial, return rc; } -static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file) +static int keyspan_pda_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index e8a65ce45a2f..a570f5201c73 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -68,7 +68,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); static void klsi_105_close(struct usb_serial_port *port); static void klsi_105_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file); +static int klsi_105_tiocmget(struct tty_struct *tty); static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void klsi_105_process_read_urb(struct urb *urb); @@ -637,7 +637,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) } #endif -static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file) +static int klsi_105_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct klsi_105_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index bd5bd8589e04..81d07fb299b8 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -77,7 +77,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, static int kobil_write_room(struct tty_struct *tty); static int kobil_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -static int kobil_tiocmget(struct tty_struct *tty, struct file *file); +static int kobil_tiocmget(struct tty_struct *tty); static int kobil_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void kobil_read_int_callback(struct urb *urb); @@ -504,7 +504,7 @@ static int kobil_write_room(struct tty_struct *tty) } -static int kobil_tiocmget(struct tty_struct *tty, struct file *file) +static int kobil_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct kobil_private *priv; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 2849f8c32015..27447095feae 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -101,7 +101,7 @@ static void mct_u232_read_int_callback(struct urb *urb); static void mct_u232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); -static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file); +static int mct_u232_tiocmget(struct tty_struct *tty); static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void mct_u232_throttle(struct tty_struct *tty); @@ -762,7 +762,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) } /* mct_u232_break_ctl */ -static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file) +static int mct_u232_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct mct_u232_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 7d3bc9a3e2b6..5d40d4151b5a 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1833,7 +1833,7 @@ static int get_lsr_info(struct tty_struct *tty, return 0; } -static int mos7720_tiocmget(struct tty_struct *tty, struct file *file) +static int mos7720_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); @@ -1865,7 +1865,7 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct file *file, struct moschip_port *mos7720_port = usb_get_serial_port_data(port); unsigned int mcr ; dbg("%s - port %d", __func__, port->number); - dbg("he was at tiocmget"); + dbg("he was at tiocmset"); mcr = mos7720_port->shadowMCR; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 5627993f9e41..ee0dc9a0890c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1644,7 +1644,7 @@ static void mos7840_unthrottle(struct tty_struct *tty) } } -static int mos7840_tiocmget(struct tty_struct *tty, struct file *file) +static int mos7840_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7840_port; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index eda1f9266c4e..e305df807396 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -352,7 +352,7 @@ static void opticon_unthrottle(struct tty_struct *tty) } } -static int opticon_tiocmget(struct tty_struct *tty, struct file *file) +static int opticon_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct opticon_private *priv = usb_get_serial_data(port->serial); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 73613205be7a..4cd3b0ef4e61 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -144,7 +144,7 @@ static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int oti6858_write_room(struct tty_struct *tty); static int oti6858_chars_in_buffer(struct tty_struct *tty); -static int oti6858_tiocmget(struct tty_struct *tty, struct file *file); +static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int oti6858_startup(struct usb_serial *serial); @@ -657,7 +657,7 @@ static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int oti6858_tiocmget(struct tty_struct *tty, struct file *file) +static int oti6858_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct oti6858_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 08c9181b8e48..6cb4f503a3f1 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -531,7 +531,7 @@ static int pl2303_tiocmset(struct tty_struct *tty, struct file *file, return set_control_lines(port->serial->dev, control); } -static int pl2303_tiocmget(struct tty_struct *tty, struct file *file) +static int pl2303_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct pl2303_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 7481ff8a49e4..66437f1e9e5b 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -389,7 +389,7 @@ static void sierra_set_termios(struct tty_struct *tty, sierra_send_setup(port); } -static int sierra_tiocmget(struct tty_struct *tty, struct file *file) +static int sierra_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned int value; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cbfb70bffdd0..cac13009fc5c 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -618,7 +618,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file, return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); } -static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file) +static int spcp8x5_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 8359ec798959..b21583fa825c 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -484,7 +484,7 @@ static int ssu100_attach(struct usb_serial *serial) return ssu100_initdevice(serial->dev); } -static int ssu100_tiocmget(struct tty_struct *tty, struct file *file) +static int ssu100_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_device *dev = port->serial->dev; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index b2902f307b47..223e60e31735 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -112,7 +112,7 @@ static int ti_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); -static int ti_tiocmget(struct tty_struct *tty, struct file *file); +static int ti_tiocmget(struct tty_struct *tty); static int ti_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void ti_break(struct tty_struct *tty, int break_state); @@ -1000,7 +1000,7 @@ static void ti_set_termios(struct tty_struct *tty, } -static int ti_tiocmget(struct tty_struct *tty, struct file *file) +static int ti_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 546a52179bec..df105c6531a1 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -496,14 +496,14 @@ static const struct file_operations serial_proc_fops = { .release = single_release, }; -static int serial_tiocmget(struct tty_struct *tty, struct file *file) +static int serial_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); if (port->serial->type->tiocmget) - return port->serial->type->tiocmget(tty, file); + return port->serial->type->tiocmget(tty); return -EINVAL; } diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 3ab77c5d9819..8b68fc783d5f 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -15,7 +15,7 @@ extern int usb_wwan_write_room(struct tty_struct *tty); extern void usb_wwan_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file); +extern int usb_wwan_tiocmget(struct tty_struct *tty); extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); extern int usb_wwan_ioctl(struct tty_struct *tty, struct file *file, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b004b2a485c3..60f942632cb4 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -79,7 +79,7 @@ void usb_wwan_set_termios(struct tty_struct *tty, } EXPORT_SYMBOL(usb_wwan_set_termios); -int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file) +int usb_wwan_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned int value; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 3f9ac88d588c..bf850139e0b8 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -156,7 +156,7 @@ static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file); +static int whiteheat_tiocmget(struct tty_struct *tty); static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); @@ -833,7 +833,7 @@ static int whiteheat_write_room(struct tty_struct *tty) return (room); } -static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file) +static int whiteheat_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index c3d43eb4150c..9539d74171db 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -271,7 +271,7 @@ struct tty_operations { void (*set_ldisc)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, int timeout); void (*send_xchar)(struct tty_struct *tty, char ch); - int (*tiocmget)(struct tty_struct *tty, struct file *file); + int (*tiocmget)(struct tty_struct *tty); int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); int (*resize)(struct tty_struct *tty, struct winsize *ws); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index c9049139a7a5..30b945397d19 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -268,7 +268,7 @@ struct usb_serial_driver { int (*chars_in_buffer)(struct tty_struct *tty); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); - int (*tiocmget)(struct tty_struct *tty, struct file *file); + int (*tiocmget)(struct tty_struct *tty); int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); int (*get_icount)(struct tty_struct *tty, diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h index eea2e6152389..fa3793b5392d 100644 --- a/include/net/irda/ircomm_tty.h +++ b/include/net/irda/ircomm_tty.h @@ -120,7 +120,7 @@ struct ircomm_tty_cb { void ircomm_tty_start(struct tty_struct *tty); void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self); -extern int ircomm_tty_tiocmget(struct tty_struct *tty, struct file *file); +extern int ircomm_tty_tiocmget(struct tty_struct *tty); extern int ircomm_tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); extern int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file, diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 2575c2db6404..7f67fa4f2f5e 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -1089,7 +1089,7 @@ static void rfcomm_tty_hangup(struct tty_struct *tty) } } -static int rfcomm_tty_tiocmget(struct tty_struct *tty, struct file *filp) +static int rfcomm_tty_tiocmget(struct tty_struct *tty) { struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c index 24cb3aa2bbfb..bb47caeba7e6 100644 --- a/net/irda/ircomm/ircomm_tty_ioctl.c +++ b/net/irda/ircomm/ircomm_tty_ioctl.c @@ -189,12 +189,12 @@ void ircomm_tty_set_termios(struct tty_struct *tty, } /* - * Function ircomm_tty_tiocmget (tty, file) + * Function ircomm_tty_tiocmget (tty) * * * */ -int ircomm_tty_tiocmget(struct tty_struct *tty, struct file *file) +int ircomm_tty_tiocmget(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; unsigned int result; -- cgit v1.2.2 From 20b9d17715017ae4dd4ec87fabc36d33b9de708e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 14 Feb 2011 16:26:50 +0000 Subject: tiocmset: kill the file pointer argument Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/amiserial.c | 4 ++-- drivers/char/cyclades.c | 2 +- drivers/char/epca.c | 4 ++-- drivers/char/ip2/ip2main.c | 4 ++-- drivers/char/isicom.c | 4 ++-- drivers/char/istallion.c | 2 +- drivers/char/moxa.c | 4 ++-- drivers/char/mxser.c | 2 +- drivers/char/nozomi.c | 4 ++-- drivers/char/pcmcia/ipwireless/tty.c | 2 +- drivers/char/pcmcia/synclink_cs.c | 6 +++--- drivers/char/riscom8.c | 4 ++-- drivers/char/rocket.c | 4 ++-- drivers/char/serial167.c | 3 +-- drivers/char/specialix.c | 2 +- drivers/char/stallion.c | 2 +- drivers/char/sx.c | 4 ++-- drivers/char/synclink.c | 6 +++--- drivers/char/synclink_gt.c | 6 +++--- drivers/char/synclinkmp.c | 8 ++++---- drivers/isdn/gigaset/interface.c | 4 ++-- drivers/isdn/gigaset/ser-gigaset.c | 2 +- drivers/isdn/i4l/isdn_tty.c | 2 +- drivers/mmc/card/sdio_uart.c | 2 +- drivers/net/irda/irtty-sir.c | 2 +- drivers/net/usb/hso.c | 6 +++--- drivers/net/wan/pc300_tty.c | 5 ++--- drivers/staging/quatech_usb2/quatech_usb2.c | 2 +- drivers/staging/serqt_usb2/serqt_usb2.c | 5 ++--- drivers/tty/hvc/hvsi.c | 4 ++-- drivers/tty/n_gsm.c | 2 +- drivers/tty/serial/68360serial.c | 2 +- drivers/tty/serial/crisv10.c | 3 +-- drivers/tty/serial/ifx6x60.c | 3 +-- drivers/tty/serial/serial_core.c | 6 ++---- drivers/tty/tty_io.c | 7 +++---- drivers/usb/class/cdc-acm.c | 2 +- drivers/usb/serial/ark3116.c | 2 +- drivers/usb/serial/belkin_sa.c | 4 ++-- drivers/usb/serial/ch341.c | 2 +- drivers/usb/serial/cp210x.c | 15 +++++++-------- drivers/usb/serial/cypress_m8.c | 4 ++-- drivers/usb/serial/digi_acceleport.c | 10 +++++----- drivers/usb/serial/ftdi_sio.c | 4 ++-- drivers/usb/serial/io_edgeport.c | 4 ++-- drivers/usb/serial/io_ti.c | 2 +- drivers/usb/serial/iuu_phoenix.c | 2 +- drivers/usb/serial/keyspan.c | 2 +- drivers/usb/serial/keyspan.h | 2 +- drivers/usb/serial/keyspan_pda.c | 2 +- drivers/usb/serial/kl5kusb105.c | 4 ++-- drivers/usb/serial/kobil_sct.c | 4 ++-- drivers/usb/serial/mct_u232.c | 4 ++-- drivers/usb/serial/mos7720.c | 2 +- drivers/usb/serial/mos7840.c | 2 +- drivers/usb/serial/oti6858.c | 4 ++-- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/sierra.c | 2 +- drivers/usb/serial/spcp8x5.c | 2 +- drivers/usb/serial/ssu100.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 6 +++--- drivers/usb/serial/usb-serial.c | 4 ++-- drivers/usb/serial/usb-wwan.h | 2 +- drivers/usb/serial/usb_wwan.c | 2 +- drivers/usb/serial/whiteheat.c | 4 ++-- include/linux/tty_driver.h | 2 +- include/linux/usb/serial.h | 2 +- include/net/irda/ircomm_tty.h | 2 +- net/bluetooth/rfcomm/tty.c | 2 +- net/irda/ircomm/ircomm_tty_ioctl.c | 4 ++-- 70 files changed, 120 insertions(+), 129 deletions(-) diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index bc67e6839059..5c15fad71ad2 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1216,8 +1216,8 @@ static int rs_tiocmget(struct tty_struct *tty) | (!(status & SER_CTS) ? TIOCM_CTS : 0); } -static int rs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int rs_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear) { struct async_struct * info = tty->driver_data; unsigned long flags; diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index e7945ddacd18..942b6f2b70a4 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -2483,7 +2483,7 @@ end: } /* cy_tiomget */ static int -cy_tiocmset(struct tty_struct *tty, struct file *file, +cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct cyclades_port *info = tty->driver_data; diff --git a/drivers/char/epca.c b/drivers/char/epca.c index ecf6f0a889fc..e5872b59f9cd 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -2015,7 +2015,7 @@ static int pc_tiocmget(struct tty_struct *tty) return mflag; } -static int pc_tiocmset(struct tty_struct *tty, struct file *file, +static int pc_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct channel *ch = tty->driver_data; @@ -2081,7 +2081,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, case TIOCMODS: if (get_user(mstat, (unsigned __user *)argp)) return -EFAULT; - return pc_tiocmset(tty, file, mstat, ~mstat); + return pc_tiocmset(tty, mstat, ~mstat); case TIOCSDTR: spin_lock_irqsave(&epca_lock, flags); ch->omodem |= ch->m_dtr; diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 476cd087118e..d5f866c7c672 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -182,7 +182,7 @@ static void ip2_stop(PTTY); static void ip2_start(PTTY); static void ip2_hangup(PTTY); static int ip2_tiocmget(struct tty_struct *tty); -static int ip2_tiocmset(struct tty_struct *tty, struct file *file, +static int ip2_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int ip2_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); @@ -2085,7 +2085,7 @@ static int ip2_tiocmget(struct tty_struct *tty) | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); } -static int ip2_tiocmset(struct tty_struct *tty, struct file *file, +static int ip2_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { i2ChanStrPtr pCh = DevTable[tty->index]; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 836370bc04c2..60f4d8ae7a49 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1082,8 +1082,8 @@ static int isicom_tiocmget(struct tty_struct *tty) ((status & ISI_RI ) ? TIOCM_RI : 0); } -static int isicom_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int isicom_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct isi_port *port = tty->driver_data; unsigned long flags; diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 7843a847b76a..763b58d58255 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -1524,7 +1524,7 @@ static int stli_tiocmget(struct tty_struct *tty) return stli_mktiocm(portp->asig.sigvalue); } -static int stli_tiocmset(struct tty_struct *tty, struct file *file, +static int stli_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct stliport *portp = tty->driver_data; diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index fdf069bb702f..9f4cd8968a5a 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -200,7 +200,7 @@ static void moxa_stop(struct tty_struct *); static void moxa_start(struct tty_struct *); static void moxa_hangup(struct tty_struct *); static int moxa_tiocmget(struct tty_struct *tty); -static int moxa_tiocmset(struct tty_struct *tty, struct file *file, +static int moxa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void moxa_poll(unsigned long); static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); @@ -1277,7 +1277,7 @@ static int moxa_tiocmget(struct tty_struct *tty) return flag; } -static int moxa_tiocmset(struct tty_struct *tty, struct file *file, +static int moxa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct moxa_port *ch; diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 4d2f03ec06cd..150a862c4989 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1347,7 +1347,7 @@ static int mxser_tiocmget(struct tty_struct *tty) ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); } -static int mxser_tiocmset(struct tty_struct *tty, struct file *file, +static int mxser_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct mxser_port *info = tty->driver_data; diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 0e1dff2ffb1e..1b74c48c4016 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1767,8 +1767,8 @@ static int ntty_tiocmget(struct tty_struct *tty) } /* Sets io controls parameters */ -static int ntty_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int ntty_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct nozomi *dc = get_dc_by_tty(tty); unsigned long flags; diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c index 7d2ef4909a73..748190dfbab0 100644 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ b/drivers/char/pcmcia/ipwireless/tty.c @@ -410,7 +410,7 @@ static int ipw_tiocmget(struct tty_struct *linux_tty) } static int -ipw_tiocmset(struct tty_struct *linux_tty, struct file *file, +ipw_tiocmset(struct tty_struct *linux_tty, unsigned int set, unsigned int clear) { struct ipw_tty *tty = linux_tty->driver_data; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 7b68ba6609fe..02127cad0980 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -419,8 +419,8 @@ static void bh_status(MGSLPC_INFO *info); * ioctl handlers */ static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount); static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params); static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty); @@ -2139,7 +2139,7 @@ static int tiocmget(struct tty_struct *tty) /* set modem control signals (DTR/RTS) */ -static int tiocmset(struct tty_struct *tty, struct file *file, +static int tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 5d0c98456c93..3666decc6438 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -1115,8 +1115,8 @@ static int rc_tiocmget(struct tty_struct *tty) return result; } -static int rc_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int rc_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct riscom_port *port = tty->driver_data; unsigned long flags; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 75e98efbc8e9..36c108811a81 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -1189,8 +1189,8 @@ static int rp_tiocmget(struct tty_struct *tty) /* * Sets the modem control lines */ -static int rp_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int rp_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct r_port *info = tty->driver_data; diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index fda90643ead7..89ac542ffff2 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1331,8 +1331,7 @@ static int cy_tiocmget(struct tty_struct *tty) } /* cy_tiocmget */ static int -cy_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct cyclades_port *info = tty->driver_data; int channel; diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index bfecfbef0895..a6b23847e4a7 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1778,7 +1778,7 @@ static int sx_tiocmget(struct tty_struct *tty) } -static int sx_tiocmset(struct tty_struct *tty, struct file *file, +static int sx_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct specialix_port *port = tty->driver_data; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 8c2bf3fb5b89..c42dbffbed16 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -1107,7 +1107,7 @@ static int stl_tiocmget(struct tty_struct *tty) return stl_getsignals(portp); } -static int stl_tiocmset(struct tty_struct *tty, struct file *file, +static int stl_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct stlport *portp; diff --git a/drivers/char/sx.c b/drivers/char/sx.c index f46214e60d0c..342c6ae67da5 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1879,8 +1879,8 @@ static int sx_tiocmget(struct tty_struct *tty) return sx_getsignals(port); } -static int sx_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int sx_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct sx_port *port = tty->driver_data; int rts = -1, dtr = -1; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index d359e092904a..691e1094c20b 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -824,7 +824,7 @@ static isr_dispatch_func UscIsrTable[7] = * ioctl call handlers */ static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, struct file *file, +static int tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount); @@ -2871,8 +2871,8 @@ static int tiocmget(struct tty_struct *tty) /* set modem control signals (DTR/RTS) */ -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct mgsl_struct *info = tty->driver_data; unsigned long flags; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index f18ab8af0e1c..04da6d61dc4f 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -513,8 +513,8 @@ static int rx_enable(struct slgt_info *info, int enable); static int modem_input_wait(struct slgt_info *info,int arg); static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); static int set_break(struct tty_struct *tty, int break_state); static int get_interface(struct slgt_info *info, int __user *if_mode); static int set_interface(struct slgt_info *info, int if_mode); @@ -3223,7 +3223,7 @@ static int tiocmget(struct tty_struct *tty) * TIOCMSET = set/clear signal values * value bit mask for command */ -static int tiocmset(struct tty_struct *tty, struct file *file, +static int tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct slgt_info *info = tty->driver_data; diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 5900213ae75b..1f9de97e8cfc 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -547,8 +547,8 @@ static int rx_enable(SLMP_INFO *info, int enable); static int modem_input_wait(SLMP_INFO *info,int arg); static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); static int set_break(struct tty_struct *tty, int break_state); static void add_device(SLMP_INFO *info); @@ -3232,8 +3232,8 @@ static int tiocmget(struct tty_struct *tty) /* set modem control signals (DTR/RTS) */ -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { SLMP_INFO *info = tty->driver_data; unsigned long flags; diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index e1a7c14f5f1d..9b2bb491c614 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -123,7 +123,7 @@ static void if_throttle(struct tty_struct *tty); static void if_unthrottle(struct tty_struct *tty); static void if_set_termios(struct tty_struct *tty, struct ktermios *old); static int if_tiocmget(struct tty_struct *tty); -static int if_tiocmset(struct tty_struct *tty, struct file *file, +static int if_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int if_write(struct tty_struct *tty, const unsigned char *buf, int count); @@ -303,7 +303,7 @@ static int if_tiocmget(struct tty_struct *tty) return retval; } -static int if_tiocmset(struct tty_struct *tty, struct file *file, +static int if_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct cardstate *cs; diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c index 0ef09d0eb96b..86a5c4f7775e 100644 --- a/drivers/isdn/gigaset/ser-gigaset.c +++ b/drivers/isdn/gigaset/ser-gigaset.c @@ -440,7 +440,7 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, if (!set && !clear) return 0; gig_dbg(DEBUG_IF, "tiocmset set %x clear %x", set, clear); - return tty->ops->tiocmset(tty, NULL, set, clear); + return tty->ops->tiocmset(tty, set, clear); } static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index ba6c2f124b58..0341c69eb152 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -1372,7 +1372,7 @@ isdn_tty_tiocmget(struct tty_struct *tty) } static int -isdn_tty_tiocmset(struct tty_struct *tty, struct file *file, +isdn_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { modem_info *info = (modem_info *) tty->driver_data; diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 86bb04d821b1..c8c9edb3d7cb 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -970,7 +970,7 @@ static int sdio_uart_tiocmget(struct tty_struct *tty) return result; } -static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file, +static int sdio_uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct sdio_uart_port *port = tty->driver_data; diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index ee1dde52e8fc..3352b2443e58 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -167,7 +167,7 @@ static int irtty_set_dtr_rts(struct sir_dev *dev, int dtr, int rts) * let's be careful... Jean II */ IRDA_ASSERT(priv->tty->ops->tiocmset != NULL, return -1;); - priv->tty->ops->tiocmset(priv->tty, NULL, set, clear); + priv->tty->ops->tiocmset(priv->tty, set, clear); return 0; } diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 7c68c456c035..956e1d6e72a5 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -324,7 +324,7 @@ struct hso_device { /* Prototypes */ /*****************************************************************************/ /* Serial driver functions */ -static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, +static int hso_serial_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void ctrl_callback(struct urb *urb); static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial); @@ -1335,7 +1335,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp) /* done */ if (result) - hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0); + hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0); err_out: mutex_unlock(&serial->parent->mutex); return result; @@ -1687,7 +1687,7 @@ static int hso_serial_tiocmget(struct tty_struct *tty) return retval; } -static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, +static int hso_serial_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { int val = 0; diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c index d999e54a7730..1c65d1c33873 100644 --- a/drivers/net/wan/pc300_tty.c +++ b/drivers/net/wan/pc300_tty.c @@ -131,8 +131,7 @@ static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx); static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char); static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char); -static int pc300_tiocmset(struct tty_struct *, struct file *, - unsigned int, unsigned int); +static int pc300_tiocmset(struct tty_struct *, unsigned int, unsigned int); static int pc300_tiocmget(struct tty_struct *); /* functions called by PC300 driver */ @@ -543,7 +542,7 @@ static int cpc_tty_chars_in_buffer(struct tty_struct *tty) return 0; } -static int pc300_tiocmset(struct tty_struct *tty, struct file *file, +static int pc300_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { st_cpc_tty_area *cpc_tty; diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index 1e50292aef74..3734448d1b82 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -1121,7 +1121,7 @@ static int qt2_tiocmget(struct tty_struct *tty) } } -static int qt2_tiocmset(struct tty_struct *tty, struct file *file, +static int qt2_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 56ded56db7b4..39776c1cf10f 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -1425,7 +1425,6 @@ static inline int qt_real_tiocmget(struct tty_struct *tty, static inline int qt_real_tiocmset(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file, struct usb_serial *serial, unsigned int value) { @@ -1486,7 +1485,7 @@ static int qt_tiocmget(struct tty_struct *tty) return retval; } -static int qt_tiocmset(struct tty_struct *tty, struct file *file, +static int qt_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { @@ -1506,7 +1505,7 @@ static int qt_tiocmset(struct tty_struct *tty, struct file *file, dbg("%s - port %d\n", __func__, port->number); dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding); - retval = qt_real_tiocmset(tty, port, file, serial, set); + retval = qt_real_tiocmset(tty, port, serial, set); spin_unlock_irqrestore(&qt_port->lock, flags); return retval; diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index 55293105a56c..8a8d6373f164 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -1103,8 +1103,8 @@ static int hvsi_tiocmget(struct tty_struct *tty) return hp->mctrl; } -static int hvsi_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int hvsi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct hvsi_struct *hp = tty->driver_data; unsigned long flags; diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 97e3d509ff82..88477d16b8b7 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2654,7 +2654,7 @@ static int gsmtty_tiocmget(struct tty_struct *tty) return dlci->modem_rx; } -static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp, +static int gsmtty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct gsm_dlci *dlci = tty->driver_data; diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c index 2a52cf14ce50..217fe1c299e0 100644 --- a/drivers/tty/serial/68360serial.c +++ b/drivers/tty/serial/68360serial.c @@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty) return result; } -static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, +static int rs_360_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { #ifdef modem_control diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 8cc5c0224b25..b9fcd0bda60c 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3581,8 +3581,7 @@ rs_break(struct tty_struct *tty, int break_state) } static int -rs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned long flags; diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 4d26d39ec344..8ee5a41d340d 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -263,7 +263,6 @@ static int ifx_spi_tiocmget(struct tty_struct *tty) /** * ifx_spi_tiocmset - set modem bits * @tty: the tty structure - * @filp: file handle issuing the request * @set: bits to set * @clear: bits to clear * @@ -272,7 +271,7 @@ static int ifx_spi_tiocmget(struct tty_struct *tty) * * FIXME: do we need to kick the tranfers when we do this ? */ -static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp, +static int ifx_spi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct ifx_spi_device *ifx_dev = tty->driver_data; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 53e490e47560..623d6bd911d7 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -925,8 +925,7 @@ static int uart_tiocmget(struct tty_struct *tty) } static int -uart_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct uart_state *state = tty->driver_data; struct uart_port *uport = state->uart_port; @@ -934,8 +933,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file, int ret = -EIO; mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { + if (!(tty->flags & (1 << TTY_IO_ERROR))) { uart_update_mctrl(uport, set, clear); ret = 0; } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index fde5a4dae3dd..83af24ca1e5e 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2481,7 +2481,6 @@ static int tty_tiocmget(struct tty_struct *tty, int __user *p) /** * tty_tiocmset - set modem status * @tty: tty device - * @file: user file pointer * @cmd: command - clear bits, set bits or set all * @p: pointer to desired bits * @@ -2491,7 +2490,7 @@ static int tty_tiocmget(struct tty_struct *tty, int __user *p) * Locking: none (up to the driver) */ -static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd, +static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd, unsigned __user *p) { int retval; @@ -2518,7 +2517,7 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int } set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP; clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP; - return tty->ops->tiocmset(tty, file, set, clear); + return tty->ops->tiocmset(tty, set, clear); } static int tty_tiocgicount(struct tty_struct *tty, void __user *arg) @@ -2659,7 +2658,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCMSET: case TIOCMBIC: case TIOCMBIS: - return tty_tiocmset(tty, file, cmd, p); + return tty_tiocmset(tty, cmd, p); case TIOCGICOUNT: retval = tty_tiocgicount(tty, p); /* For the moment allow fall through to the old method */ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 2ae996b7ce7b..e9a26fbd079c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -791,7 +791,7 @@ static int acm_tty_tiocmget(struct tty_struct *tty) TIOCM_CTS; } -static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, +static int acm_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct acm *acm = tty->driver_data; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 35b610aa3f92..2f837e983339 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -511,7 +511,7 @@ static int ark3116_tiocmget(struct tty_struct *tty) (ctrl & UART_MCR_OUT2 ? TIOCM_OUT2 : 0); } -static int ark3116_tiocmset(struct tty_struct *tty, struct file *file, +static int ark3116_tiocmset(struct tty_struct *tty, unsigned set, unsigned clr) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 48fb3bad3cd6..d6921fa1403c 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -101,7 +101,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old); static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state); static int belkin_sa_tiocmget(struct tty_struct *tty); -static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, +static int belkin_sa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); @@ -513,7 +513,7 @@ static int belkin_sa_tiocmget(struct tty_struct *tty) return control_state; } -static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, +static int belkin_sa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index aa0962b72f4c..5cbef313281e 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -431,7 +431,7 @@ out: kfree(break_reg); } -static int ch341_tiocmset(struct tty_struct *tty, struct file *file, +static int ch341_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index b3873815035c..4df3e0cecbae 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -42,9 +42,8 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); static int cp210x_tiocmget(struct tty_struct *); -static int cp210x_tiocmset(struct tty_struct *, struct file *, - unsigned int, unsigned int); -static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, +static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int); +static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int, unsigned int); static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); @@ -698,14 +697,14 @@ static void cp210x_set_termios(struct tty_struct *tty, } -static int cp210x_tiocmset (struct tty_struct *tty, struct file *file, +static int cp210x_tiocmset (struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - return cp210x_tiocmset_port(port, file, set, clear); + return cp210x_tiocmset_port(port, set, clear); } -static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, +static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int set, unsigned int clear) { unsigned int control = 0; @@ -737,9 +736,9 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, static void cp210x_dtr_rts(struct usb_serial_port *p, int on) { if (on) - cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0); + cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0); else - cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS); + cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS); } static int cp210x_tiocmget (struct tty_struct *tty) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 9c96cff691fd..2beb5a66180d 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -174,7 +174,7 @@ static int cypress_ioctl(struct tty_struct *tty, struct file *file, static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int cypress_tiocmget(struct tty_struct *tty); -static int cypress_tiocmset(struct tty_struct *tty, struct file *file, +static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int cypress_chars_in_buffer(struct tty_struct *tty); static void cypress_throttle(struct tty_struct *tty); @@ -892,7 +892,7 @@ static int cypress_tiocmget(struct tty_struct *tty) } -static int cypress_tiocmset(struct tty_struct *tty, struct file *file, +static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 08da46cb5825..86fbba6336c9 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -446,10 +446,10 @@ static void digi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static void digi_break_ctl(struct tty_struct *tty, int break_state); static int digi_tiocmget(struct tty_struct *tty); -static int digi_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); +static int digi_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear); static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count); + const unsigned char *buf, int count); static void digi_write_bulk_callback(struct urb *urb); static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); @@ -1134,8 +1134,8 @@ static int digi_tiocmget(struct tty_struct *tty) } -static int digi_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int digi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 281d18141051..f521ab1eb60f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -857,7 +857,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, static void ftdi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int ftdi_tiocmget(struct tty_struct *tty); -static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, +static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int ftdi_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); @@ -2202,7 +2202,7 @@ out: return ret; } -static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, +static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index e8fe4dcf72f0..0b8846e27a79 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -220,7 +220,7 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static void edge_break(struct tty_struct *tty, int break_state); static int edge_tiocmget(struct tty_struct *tty); -static int edge_tiocmset(struct tty_struct *tty, struct file *file, +static int edge_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int edge_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); @@ -1568,7 +1568,7 @@ static int get_lsr_info(struct edgeport_port *edge_port, return 0; } -static int edge_tiocmset(struct tty_struct *tty, struct file *file, +static int edge_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 7cb9f5cb91f3..88120523710b 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2444,7 +2444,7 @@ static void edge_set_termios(struct tty_struct *tty, change_port_settings(tty, edge_port, old_termios); } -static int edge_tiocmset(struct tty_struct *tty, struct file *file, +static int edge_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 1d96142f135a..6aca631a407a 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -150,7 +150,7 @@ static void iuu_release(struct usb_serial *serial) } } -static int iuu_tiocmset(struct tty_struct *tty, struct file *file, +static int iuu_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 1beebbb7a20a..c6e968f24e04 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -317,7 +317,7 @@ static int keyspan_tiocmget(struct tty_struct *tty) return value; } -static int keyspan_tiocmset(struct tty_struct *tty, struct file *file, +static int keyspan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 5e5fc71e68df..13fa1d1cc900 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -60,7 +60,7 @@ static void keyspan_break_ctl (struct tty_struct *tty, int break_state); static int keyspan_tiocmget (struct tty_struct *tty); static int keyspan_tiocmset (struct tty_struct *tty, - struct file *file, unsigned int set, + unsigned int set, unsigned int clear); static int keyspan_fake_startup (struct usb_serial *serial); diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 49ad2baf77cd..207caabdc4ff 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -478,7 +478,7 @@ static int keyspan_pda_tiocmget(struct tty_struct *tty) return value; } -static int keyspan_pda_tiocmset(struct tty_struct *tty, struct file *file, +static int keyspan_pda_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a570f5201c73..19373cb7c5bf 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -69,7 +69,7 @@ static void klsi_105_close(struct usb_serial_port *port); static void klsi_105_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int klsi_105_tiocmget(struct tty_struct *tty); -static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, +static int klsi_105_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void klsi_105_process_read_urb(struct urb *urb); static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, @@ -661,7 +661,7 @@ static int klsi_105_tiocmget(struct tty_struct *tty) return (int)line_state; } -static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, +static int klsi_105_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { int retval = -EINVAL; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 81d07fb299b8..22cd0c08f46f 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -78,7 +78,7 @@ static int kobil_write_room(struct tty_struct *tty); static int kobil_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static int kobil_tiocmget(struct tty_struct *tty); -static int kobil_tiocmset(struct tty_struct *tty, struct file *file, +static int kobil_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void kobil_read_int_callback(struct urb *urb); static void kobil_write_callback(struct urb *purb); @@ -544,7 +544,7 @@ static int kobil_tiocmget(struct tty_struct *tty) return result; } -static int kobil_tiocmset(struct tty_struct *tty, struct file *file, +static int kobil_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 27447095feae..ef49902c5a51 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -102,7 +102,7 @@ static void mct_u232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); static int mct_u232_tiocmget(struct tty_struct *tty); -static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, +static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void mct_u232_throttle(struct tty_struct *tty); static void mct_u232_unthrottle(struct tty_struct *tty); @@ -778,7 +778,7 @@ static int mct_u232_tiocmget(struct tty_struct *tty) return control_state; } -static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, +static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 5d40d4151b5a..95b1c64cac03 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1858,7 +1858,7 @@ static int mos7720_tiocmget(struct tty_struct *tty) return result; } -static int mos7720_tiocmset(struct tty_struct *tty, struct file *file, +static int mos7720_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index ee0dc9a0890c..9424178c6689 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1674,7 +1674,7 @@ static int mos7840_tiocmget(struct tty_struct *tty) return result; } -static int mos7840_tiocmset(struct tty_struct *tty, struct file *file, +static int mos7840_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 4cd3b0ef4e61..63734cb0fb0f 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -145,7 +145,7 @@ static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, static int oti6858_write_room(struct tty_struct *tty); static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); -static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, +static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int oti6858_startup(struct usb_serial *serial); static void oti6858_release(struct usb_serial *serial); @@ -624,7 +624,7 @@ static void oti6858_close(struct usb_serial_port *port) usb_kill_urb(port->interrupt_in_urb); } -static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, +static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 6cb4f503a3f1..b797992fa54b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -505,7 +505,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) return 0; } -static int pl2303_tiocmset(struct tty_struct *tty, struct file *file, +static int pl2303_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 66437f1e9e5b..79ee6c79ad54 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -408,7 +408,7 @@ static int sierra_tiocmget(struct tty_struct *tty) return value; } -static int sierra_tiocmset(struct tty_struct *tty, struct file *file, +static int sierra_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cac13009fc5c..dfbc543e0db8 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -595,7 +595,7 @@ static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file, return -ENOIOCTLCMD; } -static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file, +static int spcp8x5_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index b21583fa825c..abceee9d3af9 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -517,7 +517,7 @@ mget_out: return r; } -static int ssu100_tiocmset(struct tty_struct *tty, struct file *file, +static int ssu100_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 223e60e31735..c7fea4a2a1be 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -113,7 +113,7 @@ static int ti_get_icount(struct tty_struct *tty, static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static int ti_tiocmget(struct tty_struct *tty); -static int ti_tiocmset(struct tty_struct *tty, struct file *file, +static int ti_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void ti_break(struct tty_struct *tty, int break_state); static void ti_interrupt_callback(struct urb *urb); @@ -1033,8 +1033,8 @@ static int ti_tiocmget(struct tty_struct *tty) } -static int ti_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int ti_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index df105c6531a1..dab679e5b7ea 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -507,7 +507,7 @@ static int serial_tiocmget(struct tty_struct *tty) return -EINVAL; } -static int serial_tiocmset(struct tty_struct *tty, struct file *file, +static int serial_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -515,7 +515,7 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file, dbg("%s - port %d", __func__, port->number); if (port->serial->type->tiocmset) - return port->serial->type->tiocmset(tty, file, set, clear); + return port->serial->type->tiocmset(tty, set, clear); return -EINVAL; } diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 8b68fc783d5f..4d65f1c8dd93 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -16,7 +16,7 @@ extern void usb_wwan_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); extern int usb_wwan_tiocmget(struct tty_struct *tty); -extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file, +extern int usb_wwan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); extern int usb_wwan_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 60f942632cb4..b72912027ae8 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -98,7 +98,7 @@ int usb_wwan_tiocmget(struct tty_struct *tty) } EXPORT_SYMBOL(usb_wwan_tiocmget); -int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file, +int usb_wwan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index bf850139e0b8..6e0c397e869f 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -157,7 +157,7 @@ static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int whiteheat_tiocmget(struct tty_struct *tty); -static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, +static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); static int whiteheat_chars_in_buffer(struct tty_struct *tty); @@ -850,7 +850,7 @@ static int whiteheat_tiocmget(struct tty_struct *tty) return modem_signals; } -static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, +static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 9539d74171db..5dabaa2e6da3 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -272,7 +272,7 @@ struct tty_operations { void (*wait_until_sent)(struct tty_struct *tty, int timeout); void (*send_xchar)(struct tty_struct *tty, char ch); int (*tiocmget)(struct tty_struct *tty); - int (*tiocmset)(struct tty_struct *tty, struct file *file, + int (*tiocmset)(struct tty_struct *tty, unsigned int set, unsigned int clear); int (*resize)(struct tty_struct *tty, struct winsize *ws); int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 30b945397d19..c1aa1b243ba3 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -269,7 +269,7 @@ struct usb_serial_driver { void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); - int (*tiocmset)(struct tty_struct *tty, struct file *file, + int (*tiocmset)(struct tty_struct *tty, unsigned int set, unsigned int clear); int (*get_icount)(struct tty_struct *tty, struct serial_icounter_struct *icount); diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h index fa3793b5392d..980ccb66e1b4 100644 --- a/include/net/irda/ircomm_tty.h +++ b/include/net/irda/ircomm_tty.h @@ -121,7 +121,7 @@ void ircomm_tty_start(struct tty_struct *tty); void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self); extern int ircomm_tty_tiocmget(struct tty_struct *tty); -extern int ircomm_tty_tiocmset(struct tty_struct *tty, struct file *file, +extern int ircomm_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); extern int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 7f67fa4f2f5e..8e78e7447726 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -1098,7 +1098,7 @@ static int rfcomm_tty_tiocmget(struct tty_struct *tty) return dev->modem_status; } -static int rfcomm_tty_tiocmset(struct tty_struct *tty, struct file *filp, unsigned int set, unsigned int clear) +static int rfcomm_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; struct rfcomm_dlc *dlc = dev->dlc; diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c index bb47caeba7e6..5e0e718c930a 100644 --- a/net/irda/ircomm/ircomm_tty_ioctl.c +++ b/net/irda/ircomm/ircomm_tty_ioctl.c @@ -214,12 +214,12 @@ int ircomm_tty_tiocmget(struct tty_struct *tty) } /* - * Function ircomm_tty_tiocmset (tty, file, set, clear) + * Function ircomm_tty_tiocmset (tty, set, clear) * * * */ -int ircomm_tty_tiocmset(struct tty_struct *tty, struct file *file, +int ircomm_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; -- cgit v1.2.2 From 00a0d0d65b61241a718d0aee96f46b9a2d93bf26 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 14 Feb 2011 16:27:06 +0000 Subject: tty: remove filp from the USB tty ioctls We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/quatech_usb2/quatech_usb2.c | 2 +- drivers/staging/serqt_usb2/serqt_usb2.c | 2 +- drivers/usb/serial/ark3116.c | 2 +- drivers/usb/serial/ch341.c | 3 +-- drivers/usb/serial/cypress_m8.c | 4 ++-- drivers/usb/serial/ftdi_sio.c | 4 ++-- drivers/usb/serial/io_edgeport.c | 4 ++-- drivers/usb/serial/io_ti.c | 2 +- drivers/usb/serial/kobil_sct.c | 4 ++-- drivers/usb/serial/mos7720.c | 2 +- drivers/usb/serial/mos7840.c | 2 +- drivers/usb/serial/opticon.c | 2 +- drivers/usb/serial/oti6858.c | 4 ++-- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/spcp8x5.c | 2 +- drivers/usb/serial/ssu100.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 4 ++-- drivers/usb/serial/usb-serial.c | 2 +- drivers/usb/serial/usb-wwan.h | 2 +- drivers/usb/serial/usb_wwan.c | 2 +- drivers/usb/serial/whiteheat.c | 4 ++-- include/linux/usb/serial.h | 2 +- 22 files changed, 29 insertions(+), 30 deletions(-) diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index 3734448d1b82..36b18e302718 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -852,7 +852,7 @@ static int qt2_chars_in_buffer(struct tty_struct *tty) * TIOCMGET and TIOCMSET are filtered off to their own methods before they get * here, so we don't have to handle them. */ -static int qt2_ioctl(struct tty_struct *tty, struct file *file, +static int qt2_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 39776c1cf10f..e0aae86a8809 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -1191,7 +1191,7 @@ static int qt_write_room(struct tty_struct *tty) } -static int qt_ioctl(struct tty_struct *tty, struct file *file, +static int qt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 2f837e983339..5cdb9d912275 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -431,7 +431,7 @@ static int ark3116_get_icount(struct tty_struct *tty, return 0; } -static int ark3116_ioctl(struct tty_struct *tty, struct file *file, +static int ark3116_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 5cbef313281e..d0b9feac5dc3 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -552,8 +552,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/ -static int ch341_ioctl(struct tty_struct *tty, struct file *file, +static int ch341_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 2beb5a66180d..987e9bf7bd02 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -169,7 +169,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void cypress_send(struct usb_serial_port *port); static int cypress_write_room(struct tty_struct *tty); -static int cypress_ioctl(struct tty_struct *tty, struct file *file, +static int cypress_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); @@ -917,7 +917,7 @@ static int cypress_tiocmset(struct tty_struct *tty, } -static int cypress_ioctl(struct tty_struct *tty, struct file *file, +static int cypress_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f521ab1eb60f..e3e23a4e227d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -859,7 +859,7 @@ static void ftdi_set_termios(struct tty_struct *tty, static int ftdi_tiocmget(struct tty_struct *tty); static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int ftdi_ioctl(struct tty_struct *tty, struct file *file, +static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); @@ -2210,7 +2210,7 @@ static int ftdi_tiocmset(struct tty_struct *tty, return update_mctrl(port, set, clear); } -static int ftdi_ioctl(struct tty_struct *tty, struct file *file, +static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 0b8846e27a79..ae91bcdcb2bc 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -216,7 +216,7 @@ static void edge_unthrottle(struct tty_struct *tty); static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); -static int edge_ioctl(struct tty_struct *tty, struct file *file, +static int edge_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void edge_break(struct tty_struct *tty, int break_state); static int edge_tiocmget(struct tty_struct *tty); @@ -1679,7 +1679,7 @@ static int get_serial_info(struct edgeport_port *edge_port, * SerialIoctl * this function handles any ioctl calls to the driver *****************************************************************************/ -static int edge_ioctl(struct tty_struct *tty, struct file *file, +static int edge_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 88120523710b..d8434910fa7b 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2552,7 +2552,7 @@ static int get_serial_info(struct edgeport_port *edge_port, return 0; } -static int edge_ioctl(struct tty_struct *tty, struct file *file, +static int edge_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 22cd0c08f46f..667863ef0625 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -75,7 +75,7 @@ static void kobil_close(struct usb_serial_port *port); static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int kobil_write_room(struct tty_struct *tty); -static int kobil_ioctl(struct tty_struct *tty, struct file *file, +static int kobil_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int kobil_tiocmget(struct tty_struct *tty); static int kobil_tiocmset(struct tty_struct *tty, @@ -668,7 +668,7 @@ static void kobil_set_termios(struct tty_struct *tty, ); } -static int kobil_ioctl(struct tty_struct *tty, struct file *file, +static int kobil_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 95b1c64cac03..d8b3e8fa14e9 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1987,7 +1987,7 @@ static int get_serial_info(struct moschip_port *mos7720_port, return 0; } -static int mos7720_ioctl(struct tty_struct *tty, struct file *file, +static int mos7720_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 9424178c6689..7b50aa122752 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2235,7 +2235,7 @@ static int mos7840_get_icount(struct tty_struct *tty, * this function handles any ioctl calls to the driver *****************************************************************************/ -static int mos7840_ioctl(struct tty_struct *tty, struct file *file, +static int mos7840_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index e305df807396..8d603a1ca2eb 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -396,7 +396,7 @@ static int get_serial_info(struct opticon_private *priv, return 0; } -static int opticon_ioctl(struct tty_struct *tty, struct file *file, +static int opticon_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 63734cb0fb0f..4c29e6c2bda7 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -135,7 +135,7 @@ static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void oti6858_init_termios(struct tty_struct *tty); -static int oti6858_ioctl(struct tty_struct *tty, struct file *file, +static int oti6858_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void oti6858_read_int_callback(struct urb *urb); static void oti6858_read_bulk_callback(struct urb *urb); @@ -728,7 +728,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int oti6858_ioctl(struct tty_struct *tty, struct file *file, +static int oti6858_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index b797992fa54b..30461fcc2206 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -606,7 +606,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int pl2303_ioctl(struct tty_struct *tty, struct file *file, +static int pl2303_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct serial_struct ser; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index dfbc543e0db8..180ea6c7911c 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -576,7 +576,7 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port, return 0; } -static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file, +static int spcp8x5_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index abceee9d3af9..87362e48796e 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -439,7 +439,7 @@ static int ssu100_get_icount(struct tty_struct *tty, -static int ssu100_ioctl(struct tty_struct *tty, struct file *file, +static int ssu100_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c7fea4a2a1be..f4a57ad27db8 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -106,7 +106,7 @@ static int ti_write_room(struct tty_struct *tty); static int ti_chars_in_buffer(struct tty_struct *tty); static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); -static int ti_ioctl(struct tty_struct *tty, struct file *file, +static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int ti_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); @@ -818,7 +818,7 @@ static int ti_get_icount(struct tty_struct *tty, return 0; } -static int ti_ioctl(struct tty_struct *tty, struct file *file, +static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index dab679e5b7ea..b1110e136c33 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -417,7 +417,7 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file, /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->ioctl) { - retval = port->serial->type->ioctl(tty, file, cmd, arg); + retval = port->serial->type->ioctl(tty, cmd, arg); } else retval = -ENOIOCTLCMD; return retval; diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 4d65f1c8dd93..c47b6ec03063 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -18,7 +18,7 @@ extern void usb_wwan_set_termios(struct tty_struct *tty, extern int usb_wwan_tiocmget(struct tty_struct *tty); extern int usb_wwan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -extern int usb_wwan_ioctl(struct tty_struct *tty, struct file *file, +extern int usb_wwan_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); extern int usb_wwan_send_setup(struct usb_serial_port *port); extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b72912027ae8..b38d77b389d4 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -178,7 +178,7 @@ static int set_serial_info(struct usb_serial_port *port, return retval; } -int usb_wwan_ioctl(struct tty_struct *tty, struct file *file, +int usb_wwan_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 6e0c397e869f..5b073bcc807b 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -152,7 +152,7 @@ static int whiteheat_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int whiteheat_write_room(struct tty_struct *tty); -static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, +static int whiteheat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); @@ -874,7 +874,7 @@ static int whiteheat_tiocmset(struct tty_struct *tty, } -static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, +static int whiteheat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index c1aa1b243ba3..00e98ee5fba0 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -260,7 +260,7 @@ struct usb_serial_driver { const unsigned char *buf, int count); /* Called only by the tty layer */ int (*write_room)(struct tty_struct *tty); - int (*ioctl)(struct tty_struct *tty, struct file *file, + int (*ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); void (*set_termios)(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -- cgit v1.2.2 From 6caa76b7786891b42b66a0e61e2c2fff2c884620 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 14 Feb 2011 16:27:22 +0000 Subject: tty: now phase out the ioctl file pointer for good Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/amiserial.c | 2 +- drivers/char/cyclades.c | 2 +- drivers/char/epca.c | 8 ++++---- drivers/char/ip2/ip2main.c | 4 ++-- drivers/char/isicom.c | 2 +- drivers/char/istallion.c | 4 ++-- drivers/char/moxa.c | 2 +- drivers/char/mxser.c | 2 +- drivers/char/nozomi.c | 2 +- drivers/char/pcmcia/ipwireless/tty.c | 4 ++-- drivers/char/riscom8.c | 2 +- drivers/char/rocket.c | 2 +- drivers/char/ser_a2232.c | 6 +++--- drivers/char/serial167.c | 2 +- drivers/char/specialix.c | 2 +- drivers/char/stallion.c | 5 ++--- drivers/char/sx.c | 2 +- drivers/char/synclink.c | 3 +-- drivers/char/synclink_gt.c | 9 ++++----- drivers/char/synclinkmp.c | 5 ++--- drivers/char/ttyprintk.c | 2 +- drivers/char/vme_scc.c | 4 ++-- drivers/isdn/capi/capi.c | 10 ++-------- drivers/isdn/gigaset/interface.c | 4 ++-- drivers/isdn/i4l/isdn_tty.c | 3 +-- drivers/net/usb/hso.c | 2 +- drivers/tty/n_gsm.c | 2 +- drivers/tty/pty.c | 4 ++-- drivers/tty/serial/68328serial.c | 2 +- drivers/tty/serial/68360serial.c | 2 +- drivers/tty/serial/crisv10.c | 2 +- drivers/tty/serial/serial_core.c | 4 ++-- drivers/tty/tty_io.c | 4 ++-- drivers/tty/vt/vt_ioctl.c | 6 +++--- drivers/usb/class/cdc-acm.c | 2 +- drivers/usb/serial/usb-serial.c | 2 +- include/linux/tty.h | 2 +- include/linux/tty_driver.h | 9 ++++----- include/net/irda/ircomm_tty.h | 2 +- net/bluetooth/rfcomm/tty.c | 2 +- net/irda/ircomm/ircomm_tty_ioctl.c | 4 ++-- 41 files changed, 66 insertions(+), 78 deletions(-) diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 5c15fad71ad2..f214e5022472 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1293,7 +1293,7 @@ static int rs_get_icount(struct tty_struct *tty, return 0; } -static int rs_ioctl(struct tty_struct *tty, struct file * file, +static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct async_struct * info = tty->driver_data; diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 942b6f2b70a4..c99728f0cd9f 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -2680,7 +2680,7 @@ static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg, * not recognized by the driver, it should return ENOIOCTLCMD. */ static int -cy_ioctl(struct tty_struct *tty, struct file *file, +cy_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct cyclades_port *info = tty->driver_data; diff --git a/drivers/char/epca.c b/drivers/char/epca.c index e5872b59f9cd..7ad3638967ae 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -175,9 +175,9 @@ static unsigned termios2digi_i(struct channel *ch, unsigned); static unsigned termios2digi_c(struct channel *ch, unsigned); static void epcaparam(struct tty_struct *, struct channel *); static void receive_data(struct channel *, struct tty_struct *tty); -static int pc_ioctl(struct tty_struct *, struct file *, +static int pc_ioctl(struct tty_struct *, unsigned int, unsigned long); -static int info_ioctl(struct tty_struct *, struct file *, +static int info_ioctl(struct tty_struct *, unsigned int, unsigned long); static void pc_set_termios(struct tty_struct *, struct ktermios *); static void do_softint(struct work_struct *work); @@ -1919,7 +1919,7 @@ static void receive_data(struct channel *ch, struct tty_struct *tty) tty_schedule_flip(tty); } -static int info_ioctl(struct tty_struct *tty, struct file *file, +static int info_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { switch (cmd) { @@ -2057,7 +2057,7 @@ static int pc_tiocmset(struct tty_struct *tty, return 0; } -static int pc_ioctl(struct tty_struct *tty, struct file *file, +static int pc_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { digiflow_t dflow; diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index d5f866c7c672..ea7a8fb08283 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -173,7 +173,7 @@ static void ip2_flush_chars(PTTY); static int ip2_write_room(PTTY); static int ip2_chars_in_buf(PTTY); static void ip2_flush_buffer(PTTY); -static int ip2_ioctl(PTTY, struct file *, UINT, ULONG); +static int ip2_ioctl(PTTY, UINT, ULONG); static void ip2_set_termios(PTTY, struct ktermios *); static void ip2_set_line_discipline(PTTY); static void ip2_throttle(PTTY); @@ -2127,7 +2127,7 @@ static int ip2_tiocmset(struct tty_struct *tty, /* */ /******************************************************************************/ static int -ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) +ip2_ioctl ( PTTY tty, UINT cmd, ULONG arg ) { wait_queue_t wait; i2ChanStrPtr pCh = DevTable[tty->index]; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 60f4d8ae7a49..db1cf9c328d8 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1167,7 +1167,7 @@ static int isicom_get_serial_info(struct isi_port *port, return 0; } -static int isicom_ioctl(struct tty_struct *tty, struct file *filp, +static int isicom_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct isi_port *port = tty->driver_data; diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 763b58d58255..0b266272cccd 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -603,7 +603,7 @@ static int stli_putchar(struct tty_struct *tty, unsigned char ch); static void stli_flushchars(struct tty_struct *tty); static int stli_writeroom(struct tty_struct *tty); static int stli_charsinbuffer(struct tty_struct *tty); -static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void stli_settermios(struct tty_struct *tty, struct ktermios *old); static void stli_throttle(struct tty_struct *tty); static void stli_unthrottle(struct tty_struct *tty); @@ -1556,7 +1556,7 @@ static int stli_tiocmset(struct tty_struct *tty, sizeof(asysigs_t), 0); } -static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct stliport *portp; struct stlibrd *brdp; diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 9f4cd8968a5a..35b0c38590e6 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -287,7 +287,7 @@ static void moxa_low_water_check(void __iomem *ofsAddr) * TTY operations */ -static int moxa_ioctl(struct tty_struct *tty, struct file *file, +static int moxa_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct moxa_port *ch = tty->driver_data; diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 150a862c4989..d188f378684d 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1655,7 +1655,7 @@ static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, return ret; } -static int mxser_ioctl(struct tty_struct *tty, struct file *file, +static int mxser_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct mxser_port *info = tty->driver_data; diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 1b74c48c4016..513ba12064ea 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1824,7 +1824,7 @@ static int ntty_tiocgicount(struct tty_struct *tty, return 0; } -static int ntty_ioctl(struct tty_struct *tty, struct file *file, +static int ntty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct port *port = tty->driver_data; diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c index 748190dfbab0..ef92869502a7 100644 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ b/drivers/char/pcmcia/ipwireless/tty.c @@ -425,7 +425,7 @@ ipw_tiocmset(struct tty_struct *linux_tty, return set_control_lines(tty, set, clear); } -static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file, +static int ipw_ioctl(struct tty_struct *linux_tty, unsigned int cmd, unsigned long arg) { struct ipw_tty *tty = linux_tty->driver_data; @@ -484,7 +484,7 @@ static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file, return tty_perform_flush(linux_tty, arg); } } - return tty_mode_ioctl(linux_tty, file, cmd , arg); + return -ENOIOCTLCMD; } static int add_tty(int j, diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 3666decc6438..602643a40b4b 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -1236,7 +1236,7 @@ static int rc_get_serial_info(struct riscom_port *port, return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0; } -static int rc_ioctl(struct tty_struct *tty, struct file *filp, +static int rc_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct riscom_port *port = tty->driver_data; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 36c108811a81..3780da8ad12d 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -1326,7 +1326,7 @@ static int get_version(struct r_port *info, struct rocket_version __user *retver } /* IOCTL call handler into the driver */ -static int rp_ioctl(struct tty_struct *tty, struct file *file, +static int rp_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct r_port *info = tty->driver_data; diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c index 9610861d1f5f..3f47c2ead8e5 100644 --- a/drivers/char/ser_a2232.c +++ b/drivers/char/ser_a2232.c @@ -133,8 +133,8 @@ static void a2232_hungup(void *ptr); /* END GENERIC_SERIAL PROTOTYPES */ /* Functions that the TTY driver struct expects */ -static int a2232_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg); +static int a2232_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); static void a2232_throttle(struct tty_struct *tty); static void a2232_unthrottle(struct tty_struct *tty); static int a2232_open(struct tty_struct * tty, struct file * filp); @@ -447,7 +447,7 @@ static void a2232_hungup(void *ptr) /*** END OF REAL_DRIVER FUNCTIONS ***/ /*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ -static int a2232_ioctl( struct tty_struct *tty, struct file *file, +static int a2232_ioctl( struct tty_struct *tty, unsigned int cmd, unsigned long arg) { return -ENOIOCTLCMD; diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 89ac542ffff2..674af6933978 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1492,7 +1492,7 @@ get_default_timeout(struct cyclades_port *info, unsigned long __user * value) } static int -cy_ioctl(struct tty_struct *tty, struct file *file, +cy_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct cyclades_port *info = tty->driver_data; diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index a6b23847e4a7..47e5753f732a 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1928,7 +1928,7 @@ static int sx_get_serial_info(struct specialix_port *port, } -static int sx_ioctl(struct tty_struct *tty, struct file *filp, +static int sx_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct specialix_port *port = tty->driver_data; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index c42dbffbed16..4fff5cd3b163 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -1132,14 +1132,13 @@ static int stl_tiocmset(struct tty_struct *tty, return 0; } -static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +static int stl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct stlport *portp; int rc; void __user *argp = (void __user *)arg; - pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd, - arg); + pr_debug("stl_ioctl(tty=%p,cmd=%x,arg=%lx)\n", tty, cmd, arg); portp = tty->driver_data; if (portp == NULL) diff --git a/drivers/char/sx.c b/drivers/char/sx.c index 342c6ae67da5..1291462bcddb 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1899,7 +1899,7 @@ static int sx_tiocmset(struct tty_struct *tty, return 0; } -static int sx_ioctl(struct tty_struct *tty, struct file *filp, +static int sx_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { int rc; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 691e1094c20b..18888d005a0a 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -2962,13 +2962,12 @@ static int msgl_get_icount(struct tty_struct *tty, * Arguments: * * tty pointer to tty instance data - * file pointer to associated file object for device * cmd IOCTL command code * arg command argument/context * * Return Value: 0 if success, otherwise error code */ -static int mgsl_ioctl(struct tty_struct *tty, struct file * file, +static int mgsl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct mgsl_struct * info = tty->driver_data; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 04da6d61dc4f..a35dd549a008 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -154,7 +154,7 @@ static void flush_buffer(struct tty_struct *tty); static void tx_hold(struct tty_struct *tty); static void tx_release(struct tty_struct *tty); -static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int chars_in_buffer(struct tty_struct *tty); static void throttle(struct tty_struct * tty); static void unthrottle(struct tty_struct * tty); @@ -1030,13 +1030,12 @@ static void tx_release(struct tty_struct *tty) * Arguments * * tty pointer to tty instance data - * file pointer to associated file object for device * cmd IOCTL command code * arg command argument/context * * Return 0 if success, otherwise error code */ -static int ioctl(struct tty_struct *tty, struct file *file, +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct slgt_info *info = tty->driver_data; @@ -1200,7 +1199,7 @@ static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *ne return 0; } -static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file, +static long slgt_compat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct slgt_info *info = tty->driver_data; @@ -1239,7 +1238,7 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file, case MGSL_IOCSIF: case MGSL_IOCSXSYNC: case MGSL_IOCSXCTRL: - rc = ioctl(tty, file, cmd, arg); + rc = ioctl(tty, cmd, arg); break; } diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 1f9de97e8cfc..327343694473 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -520,7 +520,7 @@ static void flush_buffer(struct tty_struct *tty); static void tx_hold(struct tty_struct *tty); static void tx_release(struct tty_struct *tty); -static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int chars_in_buffer(struct tty_struct *tty); static void throttle(struct tty_struct * tty); static void unthrottle(struct tty_struct * tty); @@ -1248,13 +1248,12 @@ static void tx_release(struct tty_struct *tty) * Arguments: * * tty pointer to tty instance data - * file pointer to associated file object for device * cmd IOCTL command code * arg command argument/context * * Return Value: 0 if success, otherwise error code */ -static int ioctl(struct tty_struct *tty, struct file *file, +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { SLMP_INFO *info = tty->driver_data; diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index c40c1612c8a7..a1f68af4ccf4 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -144,7 +144,7 @@ static int tpk_write_room(struct tty_struct *tty) /* * TTY operations ioctl function. */ -static int tpk_ioctl(struct tty_struct *tty, struct file *file, +static int tpk_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct ttyprintk_port *tpkp = tty->driver_data; diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c index 12de1202d22c..96838640f575 100644 --- a/drivers/char/vme_scc.c +++ b/drivers/char/vme_scc.c @@ -75,7 +75,7 @@ static void scc_hungup(void *ptr); static void scc_close(void *ptr); static int scc_chars_in_buffer(void * ptr); static int scc_open(struct tty_struct * tty, struct file * filp); -static int scc_ioctl(struct tty_struct * tty, struct file * filp, +static int scc_ioctl(struct tty_struct * tty, unsigned int cmd, unsigned long arg); static void scc_throttle(struct tty_struct *tty); static void scc_unthrottle(struct tty_struct *tty); @@ -1046,7 +1046,7 @@ static void scc_unthrottle (struct tty_struct * tty) } -static int scc_ioctl(struct tty_struct *tty, struct file *file, +static int scc_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { return -ENOIOCTLCMD; diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index f80a7c48a35f..0d7088367038 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -1219,16 +1219,10 @@ static int capinc_tty_chars_in_buffer(struct tty_struct *tty) return mp->outbytes; } -static int capinc_tty_ioctl(struct tty_struct *tty, struct file * file, +static int capinc_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { - int error = 0; - switch (cmd) { - default: - error = n_tty_ioctl_helper(tty, file, cmd, arg); - break; - } - return error; + return -ENOIOCTLCMD; } static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios * old) diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index 9b2bb491c614..59de638225fe 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -115,7 +115,7 @@ static int if_config(struct cardstate *cs, int *arg) static int if_open(struct tty_struct *tty, struct file *filp); static void if_close(struct tty_struct *tty, struct file *filp); -static int if_ioctl(struct tty_struct *tty, struct file *file, +static int if_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int if_write_room(struct tty_struct *tty); static int if_chars_in_buffer(struct tty_struct *tty); @@ -205,7 +205,7 @@ static void if_close(struct tty_struct *tty, struct file *filp) module_put(cs->driver->owner); } -static int if_ioctl(struct tty_struct *tty, struct file *file, +static int if_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct cardstate *cs; diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index 0341c69eb152..3d88f15aa218 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -1413,8 +1413,7 @@ isdn_tty_tiocmset(struct tty_struct *tty, } static int -isdn_tty_ioctl(struct tty_struct *tty, struct file *file, - uint cmd, ulong arg) +isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg) { modem_info *info = (modem_info *) tty->driver_data; int retval; diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 956e1d6e72a5..2ad58a0377b7 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1730,7 +1730,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty, USB_CTRL_SET_TIMEOUT); } -static int hso_serial_ioctl(struct tty_struct *tty, struct file *file, +static int hso_serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct hso_serial *serial = get_serial_by_tty(tty); diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 88477d16b8b7..50f3ffd610b7 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2671,7 +2671,7 @@ static int gsmtty_tiocmset(struct tty_struct *tty, } -static int gsmtty_ioctl(struct tty_struct *tty, struct file *filp, +static int gsmtty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { return -ENOIOCTLCMD; diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 923a48585501..c88029af84dd 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -334,7 +334,7 @@ free_mem_out: return -ENOMEM; } -static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file, +static int pty_bsd_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { switch (cmd) { @@ -489,7 +489,7 @@ static struct ctl_table pty_root_table[] = { }; -static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file, +static int pty_unix98_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { switch (cmd) { diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index a9d99856c892..1de0e8d4bde1 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -945,7 +945,7 @@ static void send_break(struct m68k_serial * info, unsigned int duration) local_irq_restore(flags); } -static int rs_ioctl(struct tty_struct *tty, struct file * file, +static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { int error; diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c index 217fe1c299e0..514a356d8d64 100644 --- a/drivers/tty/serial/68360serial.c +++ b/drivers/tty/serial/68360serial.c @@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty, return 0; } -static int rs_360_ioctl(struct tty_struct *tty, struct file * file, +static int rs_360_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { int error; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index b9fcd0bda60c..225123b37f19 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3647,7 +3647,7 @@ rs_tiocmget(struct tty_struct *tty) static int -rs_ioctl(struct tty_struct *tty, struct file * file, +rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct e100_serial * info = (struct e100_serial *)tty->driver_data; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 623d6bd911d7..733fe8e73f0f 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1099,7 +1099,7 @@ static int uart_get_icount(struct tty_struct *tty, * Called via sys_ioctl. We can use spin_lock_irq() here. */ static int -uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, +uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct uart_state *state = tty->driver_data; @@ -1152,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, mutex_lock(&port->mutex); - if (tty_hung_up_p(filp)) { + if (tty->flags & (1 << TTY_IO_ERROR)) { ret = -EIO; goto out_up; } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 83af24ca1e5e..20a862a2a0c2 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2676,7 +2676,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; } if (tty->ops->ioctl) { - retval = (tty->ops->ioctl)(tty, file, cmd, arg); + retval = (tty->ops->ioctl)(tty, cmd, arg); if (retval != -ENOIOCTLCMD) return retval; } @@ -2704,7 +2704,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd, return -EINVAL; if (tty->ops->compat_ioctl) { - retval = (tty->ops->compat_ioctl)(tty, file, cmd, arg); + retval = (tty->ops->compat_ioctl)(tty, cmd, arg); if (retval != -ENOIOCTLCMD) return retval; } diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 9e9a901442a3..b64804965316 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -495,7 +495,7 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ * We handle the console-specific ioctl's here. We allow the * capability to modify any console, not just the fg_console. */ -int vt_ioctl(struct tty_struct *tty, struct file * file, +int vt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct vc_data *vc = tty->driver_data; @@ -1495,7 +1495,7 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud, return 0; } -long vt_compat_ioctl(struct tty_struct *tty, struct file * file, +long vt_compat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct vc_data *vc = tty->driver_data; @@ -1581,7 +1581,7 @@ out: fallback: tty_unlock(); - return vt_ioctl(tty, file, cmd, arg); + return vt_ioctl(tty, cmd, arg); } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e9a26fbd079c..8d994a8bdc90 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -813,7 +813,7 @@ static int acm_tty_tiocmset(struct tty_struct *tty, return acm_set_control(acm, acm->ctrlout = newctrl); } -static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, +static int acm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct acm *acm = tty->driver_data; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b1110e136c33..a72575349744 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -406,7 +406,7 @@ static void serial_unthrottle(struct tty_struct *tty) port->serial->type->unthrottle(tty); } -static int serial_ioctl(struct tty_struct *tty, struct file *file, +static int serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/include/linux/tty.h b/include/linux/tty.h index 54e4eaaa0561..483df15146d2 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -584,7 +584,7 @@ extern int pcxe_open(struct tty_struct *tty, struct file *filp); /* vt.c */ -extern int vt_ioctl(struct tty_struct *tty, struct file *file, +extern int vt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file, diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 5dabaa2e6da3..9deeac855240 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -98,8 +98,7 @@ * * Note: Do not call this function directly, call tty_write_room * - * int (*ioctl)(struct tty_struct *tty, struct file * file, - * unsigned int cmd, unsigned long arg); + * int (*ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); * * This routine allows the tty driver to implement * device-specific ioctls. If the ioctl number passed in cmd @@ -107,7 +106,7 @@ * * Optional * - * long (*compat_ioctl)(struct tty_struct *tty, struct file * file, + * long (*compat_ioctl)(struct tty_struct *tty,, * unsigned int cmd, unsigned long arg); * * implement ioctl processing for 32 bit process on 64 bit system @@ -256,9 +255,9 @@ struct tty_operations { void (*flush_chars)(struct tty_struct *tty); int (*write_room)(struct tty_struct *tty); int (*chars_in_buffer)(struct tty_struct *tty); - int (*ioctl)(struct tty_struct *tty, struct file * file, + int (*ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); - long (*compat_ioctl)(struct tty_struct *tty, struct file * file, + long (*compat_ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); void (*set_termios)(struct tty_struct *tty, struct ktermios * old); void (*throttle)(struct tty_struct * tty); diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h index 980ccb66e1b4..59ba38bc400f 100644 --- a/include/net/irda/ircomm_tty.h +++ b/include/net/irda/ircomm_tty.h @@ -123,7 +123,7 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self); extern int ircomm_tty_tiocmget(struct tty_struct *tty); extern int ircomm_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -extern int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file, +extern int ircomm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); extern void ircomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios); diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 8e78e7447726..b1805ff95415 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -830,7 +830,7 @@ static int rfcomm_tty_write_room(struct tty_struct *tty) return room; } -static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) +static int rfcomm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { BT_DBG("tty %p cmd 0x%02x", tty, cmd); diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c index 5e0e718c930a..77c5e6499f8f 100644 --- a/net/irda/ircomm/ircomm_tty_ioctl.c +++ b/net/irda/ircomm/ircomm_tty_ioctl.c @@ -365,12 +365,12 @@ static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self, } /* - * Function ircomm_tty_ioctl (tty, file, cmd, arg) + * Function ircomm_tty_ioctl (tty, cmd, arg) * * * */ -int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file, +int ircomm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; -- cgit v1.2.2 From 94c2273d6c1b65eaaf2a6446c7147bdf6e5ae924 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Feb 2011 12:02:51 -0800 Subject: tty: fix build error in vt_ioctl.c if CONFIG_COMPAT is enabled This was caused by the previous patch to remove the file pointer from the tty ioctl handler. Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/tty.h b/include/linux/tty.h index 483df15146d2..ef1e0123573b 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -587,7 +587,7 @@ extern int pcxe_open(struct tty_struct *tty, struct file *filp); extern int vt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file, +extern long vt_compat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); /* tty_mutex.c */ -- cgit v1.2.2 From 8d075b199b9a66ad90296f898f1f15c0ae1511b8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 14 Feb 2011 16:27:53 +0000 Subject: tty: add a helper for setting termios data from kernel side This basically encapsulates the small bit of locking knowledge needed. While we are at it make sure we blow up on any more abusers and unsafe misuses of ioctl for this kind of stuff. We change the function to return an argument as at some point it needs to honour the POSIX 'I asked for changes but got none of them' error reporting corner case. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ioctl.c | 14 +++++++++----- include/linux/tty.h | 1 + 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 0c1889971459..1a1135d580a2 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -486,7 +486,7 @@ int tty_termios_hw_change(struct ktermios *a, struct ktermios *b) EXPORT_SYMBOL(tty_termios_hw_change); /** - * change_termios - update termios values + * tty_set_termios - update termios values * @tty: tty to update * @new_termios: desired new value * @@ -497,7 +497,7 @@ EXPORT_SYMBOL(tty_termios_hw_change); * Locking: termios_mutex */ -static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) +int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) { struct ktermios old_termios; struct tty_ldisc *ld; @@ -553,7 +553,9 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) tty_ldisc_deref(ld); } mutex_unlock(&tty->termios_mutex); + return 0; } +EXPORT_SYMBOL_GPL(tty_set_termios); /** * set_termios - set termios values for a tty @@ -562,7 +564,7 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) * @opt: option information * * Helper function to prepare termios data and run necessary other - * functions before using change_termios to do the actual changes. + * functions before using tty_set_termios to do the actual changes. * * Locking: * Called functions take ldisc and termios_mutex locks @@ -620,7 +622,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) return -EINTR; } - change_termios(tty, &tmp_termios); + tty_set_termios(tty, &tmp_termios); /* FIXME: Arguably if tmp_termios == tty->termios AND the actual requested termios was not tmp_termios then we may @@ -797,7 +799,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) termios.c_ospeed); #endif mutex_unlock(&tty->termios_mutex); - change_termios(tty, &termios); + tty_set_termios(tty, &termios); return 0; } #endif @@ -951,6 +953,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, int ret = 0; struct ktermios kterm; + BUG_ON(file == NULL); + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) real_tty = tty->link; diff --git a/include/linux/tty.h b/include/linux/tty.h index ef1e0123573b..4e53d4641b38 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -448,6 +448,7 @@ extern void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud); extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); +extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); extern void tty_ldisc_deref(struct tty_ldisc *); -- cgit v1.2.2 From afaae08442d86402f9e0b63475c02a651c6f1387 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 14 Feb 2011 16:28:18 +0000 Subject: hci_ath: Fix the mess in this driver Was this exploitable - who knows, but it was certainly totally broken Signed-of-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/bluetooth/hci_ath.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index 6a160c17ea94..bd34406faaae 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -51,32 +51,32 @@ struct ath_struct { static int ath_wakeup_ar3k(struct tty_struct *tty) { - struct termios settings; - int status = tty->driver->ops->tiocmget(tty, NULL); + struct ktermios ktermios; + int status = tty->driver->ops->tiocmget(tty); if (status & TIOCM_CTS) return status; /* Disable Automatic RTSCTS */ - n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings); - settings.c_cflag &= ~CRTSCTS; - n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings); + memcpy(&ktermios, tty->termios, sizeof(ktermios)); + ktermios.c_cflag &= ~CRTSCTS; + tty_set_termios(tty, &ktermios); /* Clear RTS first */ - status = tty->driver->ops->tiocmget(tty, NULL); - tty->driver->ops->tiocmset(tty, NULL, 0x00, TIOCM_RTS); + status = tty->driver->ops->tiocmget(tty); + tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS); mdelay(20); /* Set RTS, wake up board */ - status = tty->driver->ops->tiocmget(tty, NULL); - tty->driver->ops->tiocmset(tty, NULL, TIOCM_RTS, 0x00); + status = tty->driver->ops->tiocmget(tty); + tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00); mdelay(20); - status = tty->driver->ops->tiocmget(tty, NULL); + status = tty->driver->ops->tiocmget(tty); - n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings); - settings.c_cflag |= CRTSCTS; - n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings); + /* Disable Automatic RTSCTS */ + ktermios.c_cflag |= CRTSCTS; + status = tty_set_termios(tty, &ktermios); return status; } -- cgit v1.2.2 From 3c95c985fa91ecf6a0e29622bbdd13dcfc5ce9f1 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 17 Feb 2011 18:39:28 +0100 Subject: tty: add TIOCVHANGUP to allow clean tty shutdown of all ttys This is useful for system management software so that it can kick off things like gettys and everything that's started from a tty, before we reuse it from/for something else or shut it down. Without this ioctl it would have to temporarily become the owner of the tty, then call vhangup() and then give it up again. Cc: Lennart Poettering Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/alpha/include/asm/ioctls.h | 1 + arch/mips/include/asm/ioctls.h | 1 + arch/parisc/include/asm/ioctls.h | 1 + arch/powerpc/include/asm/ioctls.h | 1 + arch/sh/include/asm/ioctls.h | 1 + arch/sparc/include/asm/ioctls.h | 1 + arch/xtensa/include/asm/ioctls.h | 1 + drivers/tty/tty_io.c | 5 +++++ include/asm-generic/ioctls.h | 1 + 9 files changed, 13 insertions(+) diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h index 034b6cf5d9f3..80e1cee90f1f 100644 --- a/arch/alpha/include/asm/ioctls.h +++ b/arch/alpha/include/asm/ioctls.h @@ -94,6 +94,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h index d967b8997626..92403c3d6007 100644 --- a/arch/mips/include/asm/ioctls.h +++ b/arch/mips/include/asm/ioctls.h @@ -85,6 +85,7 @@ #define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 /* I hope the range from 0x5480 on is free ... */ #define TIOCSCTTY 0x5480 /* become controlling tty */ diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h index 6ba80d03623a..054ec06f9e23 100644 --- a/arch/parisc/include/asm/ioctls.h +++ b/arch/parisc/include/asm/ioctls.h @@ -54,6 +54,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h index c7dc17cf84f1..e9b78870aaab 100644 --- a/arch/powerpc/include/asm/ioctls.h +++ b/arch/powerpc/include/asm/ioctls.h @@ -96,6 +96,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h index 84e85a792638..a6769f352bf6 100644 --- a/arch/sh/include/asm/ioctls.h +++ b/arch/sh/include/asm/ioctls.h @@ -87,6 +87,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP _IO('T', 0x37) #define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ #define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h index ed3807b96bb5..28d0c8b02cc3 100644 --- a/arch/sparc/include/asm/ioctls.h +++ b/arch/sparc/include/asm/ioctls.h @@ -20,6 +20,7 @@ #define TCSETSW2 _IOW('T', 14, struct termios2) #define TCSETSF2 _IOW('T', 15, struct termios2) #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ +#define TIOCVHANGUP _IO('T', 0x37) /* Note that all the ioctls that are not available in Linux have a * double underscore on the front to: a) avoid some programs to diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h index ccf1800f0b0c..fd1d1369a407 100644 --- a/arch/xtensa/include/asm/ioctls.h +++ b/arch/xtensa/include/asm/ioctls.h @@ -100,6 +100,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP _IO('T', 0x37) #define TIOCSERCONFIG _IO('T', 83) #define TIOCSERGWILD _IOR('T', 84, int) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 20a862a2a0c2..8ef2d69470ec 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2626,6 +2626,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return put_user(tty->ldisc->ops->num, (int __user *)p); case TIOCSETD: return tiocsetd(tty, p); + case TIOCVHANGUP: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + tty_vhangup(tty); + return 0; case TIOCGDEV: { unsigned int ret = new_encode_dev(tty_devnum(real_tty)); diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h index 3f3f2d189fb8..199975fac395 100644 --- a/include/asm-generic/ioctls.h +++ b/include/asm-generic/ioctls.h @@ -73,6 +73,7 @@ #define TCSETXF 0x5434 #define TCSETXW 0x5435 #define TIOCSIG _IOW('T', 0x36, int) /* pty: generate signal */ +#define TIOCVHANGUP 0x5437 #define FIONCLEX 0x5450 #define FIOCLEX 0x5451 -- cgit v1.2.2 From bdcffc5a1a28b566a38a4b0d5bcefc78a97f4ecb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 22 Feb 2011 15:41:47 -0800 Subject: tty: move Kconfig entries into drivers/tty from drivers/char The Kconfig options for the drivers/tty/ files still were hanging around in the "big" drivers/char/Kconfig file, so move them to the proper location under drivers/tty and drivers/tty/hvc/ Signed-off-by: Greg Kroah-Hartman --- drivers/char/Kconfig | 254 +----------------------------------------------- drivers/tty/Kconfig | 150 ++++++++++++++++++++++++++++ drivers/tty/hvc/Kconfig | 105 ++++++++++++++++++++ 3 files changed, 257 insertions(+), 252 deletions(-) create mode 100644 drivers/tty/Kconfig create mode 100644 drivers/tty/hvc/Kconfig diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 17f9b968b988..9b9ab867f50e 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -4,89 +4,7 @@ menu "Character devices" -config VT - bool "Virtual terminal" if EXPERT - depends on !S390 - select INPUT - default y - ---help--- - If you say Y here, you will get support for terminal devices with - display and keyboard devices. These are called "virtual" because you - can run several virtual terminals (also called virtual consoles) on - one physical terminal. This is rather useful, for example one - virtual terminal can collect system messages and warnings, another - one can be used for a text-mode user session, and a third could run - an X session, all in parallel. Switching between virtual terminals - is done with certain key combinations, usually Alt-. - - The setterm command ("man setterm") can be used to change the - properties (such as colors or beeping) of a virtual terminal. The - man page console_codes(4) ("man console_codes") contains the special - character sequences that can be used to change those properties - directly. The fonts used on virtual terminals can be changed with - the setfont ("man setfont") command and the key bindings are defined - with the loadkeys ("man loadkeys") command. - - You need at least one virtual terminal device in order to make use - of your keyboard and monitor. Therefore, only people configuring an - embedded system would want to say N here in order to save some - memory; the only way to log into such a system is then via a serial - or network connection. - - If unsure, say Y, or else you won't be able to do much with your new - shiny Linux system :-) - -config CONSOLE_TRANSLATIONS - depends on VT - default y - bool "Enable character translations in console" if EXPERT - ---help--- - This enables support for font mapping and Unicode translation - on virtual consoles. - -config VT_CONSOLE - bool "Support for console on virtual terminal" if EXPERT - depends on VT - default y - ---help--- - The system console is the device which receives all kernel messages - and warnings and which allows logins in single user mode. If you - answer Y here, a virtual terminal (the device used to interact with - a physical terminal) can be used as system console. This is the most - common mode of operations, so you should say Y here unless you want - the kernel messages be output only to a serial port (in which case - you should say Y to "Console on serial port", below). - - If you do say Y here, by default the currently visible virtual - terminal (/dev/tty0) will be used as system console. You can change - that with a kernel command line option such as "console=tty3" which - would use the third virtual terminal as system console. (Try "man - bootparam" or see the documentation of your boot loader (lilo or - loadlin) about how to pass options to the kernel at boot time.) - - If unsure, say Y. - -config HW_CONSOLE - bool - depends on VT && !S390 && !UML - default y - -config VT_HW_CONSOLE_BINDING - bool "Support for binding and unbinding console drivers" - depends on HW_CONSOLE - default n - ---help--- - The virtual terminal is the device that interacts with the physical - terminal through console drivers. On these systems, at least one - console driver is loaded. In other configurations, additional console - drivers may be enabled, such as the framebuffer console. If more than - 1 console driver is enabled, setting this to 'y' will allow you to - select the console driver that will serve as the backend for the - virtual terminals. - - See for more - information. For framebuffer console users, please refer to - . +source "drivers/tty/Kconfig" config DEVKMEM bool "/dev/kmem virtual device support" @@ -428,71 +346,6 @@ config SGI_MBCS source "drivers/tty/serial/Kconfig" -config UNIX98_PTYS - bool "Unix98 PTY support" if EXPERT - default y - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx for - masters and /dev/ttyxx for slaves of pseudo terminals. This scheme - has a number of problems. The GNU C library glibc 2.1 and later, - however, supports the Unix98 naming standard: in order to acquire a - pseudo terminal, a process opens /dev/ptmx; the number of the pseudo - terminal is then made available to the process and the pseudo - terminal slave can be accessed as /dev/pts/. What was - traditionally /dev/ttyp2 will then be /dev/pts/2, for example. - - All modern Linux systems use the Unix98 ptys. Say Y unless - you're on an embedded system and want to conserve memory. - -config DEVPTS_MULTIPLE_INSTANCES - bool "Support multiple instances of devpts" - depends on UNIX98_PTYS - default n - ---help--- - Enable support for multiple instances of devpts filesystem. - If you want to have isolated PTY namespaces (eg: in containers), - say Y here. Otherwise, say N. If enabled, each mount of devpts - filesystem with the '-o newinstance' option will create an - independent PTY namespace. - -config LEGACY_PTYS - bool "Legacy (BSD) PTY support" - default y - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx - for masters and /dev/ttyxx for slaves of pseudo - terminals. This scheme has a number of problems, including - security. This option enables these legacy devices; on most - systems, it is safe to say N. - - -config LEGACY_PTY_COUNT - int "Maximum number of legacy PTY in use" - depends on LEGACY_PTYS - range 0 256 - default "256" - ---help--- - The maximum number of legacy PTYs that can be used at any one time. - The default is 256, and should be more than enough. Embedded - systems may want to reduce this to save memory. - - When not in use, each legacy PTY occupies 12 bytes on 32-bit - architectures and 24 bytes on 64-bit architectures. - config TTY_PRINTK bool "TTY driver to output user messages via printk" depends on EXPERT @@ -612,93 +465,7 @@ config PPDEV If unsure, say N. -config HVC_DRIVER - bool - help - Generic "hypervisor virtual console" infrastructure for various - hypervisors (pSeries, iSeries, Xen, lguest). - It will automatically be selected if one of the back-end console drivers - is selected. - -config HVC_IRQ - bool - -config HVC_CONSOLE - bool "pSeries Hypervisor Virtual Console support" - depends on PPC_PSERIES - select HVC_DRIVER - select HVC_IRQ - help - pSeries machines when partitioned support a hypervisor virtual - console. This driver allows each pSeries partition to have a console - which is accessed via the HMC. - -config HVC_ISERIES - bool "iSeries Hypervisor Virtual Console support" - depends on PPC_ISERIES - default y - select HVC_DRIVER - select HVC_IRQ - select VIOPATH - help - iSeries machines support a hypervisor virtual console. - -config HVC_RTAS - bool "IBM RTAS Console support" - depends on PPC_RTAS - select HVC_DRIVER - help - IBM Console device driver which makes use of RTAS - -config HVC_BEAT - bool "Toshiba's Beat Hypervisor Console support" - depends on PPC_CELLEB - select HVC_DRIVER - help - Toshiba's Cell Reference Set Beat Console device driver - -config HVC_IUCV - bool "z/VM IUCV Hypervisor console support (VM only)" - depends on S390 - select HVC_DRIVER - select IUCV - default y - help - This driver provides a Hypervisor console (HVC) back-end to access - a Linux (console) terminal via a z/VM IUCV communication path. - -config HVC_XEN - bool "Xen Hypervisor Console support" - depends on XEN - select HVC_DRIVER - select HVC_IRQ - default y - help - Xen virtual console device driver - -config HVC_UDBG - bool "udbg based fake hypervisor console" - depends on PPC && EXPERIMENTAL - select HVC_DRIVER - default n - -config HVC_DCC - bool "ARM JTAG DCC console" - depends on ARM - select HVC_DRIVER - help - This console uses the JTAG DCC on ARM to create a console under the HVC - driver. This console is used through a JTAG only on ARM. If you don't have - a JTAG then you probably don't want this option. - -config HVC_BFIN_JTAG - bool "Blackfin JTAG console" - depends on BLACKFIN - select HVC_DRIVER - help - This console uses the Blackfin JTAG to create a console under the - the HVC driver. If you don't have JTAG, then you probably don't - want this option. +source "drivers/tty/hvc/Kconfig" config VIRTIO_CONSOLE tristate "Virtio console" @@ -716,23 +483,6 @@ config VIRTIO_CONSOLE the port which can be used by udev scripts to create a symlink to the device. -config HVCS - tristate "IBM Hypervisor Virtual Console Server support" - depends on PPC_PSERIES && HVC_CONSOLE - help - Partitionable IBM Power5 ppc64 machines allow hosting of - firmware virtual consoles from one Linux partition by - another Linux partition. This driver allows console data - from Linux partitions to be accessed through TTY device - interfaces in the device tree of a Linux partition running - this driver. - - To compile this driver as a module, choose M here: the - module will be called hvcs. Additionally, this module - will depend on arch specific APIs exported from hvcserver.ko - which will also be compiled when this driver is built as a - module. - config IBM_BSR tristate "IBM POWER Barrier Synchronization Register support" depends on PPC_PSERIES diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig new file mode 100644 index 000000000000..9cfbdb318ed9 --- /dev/null +++ b/drivers/tty/Kconfig @@ -0,0 +1,150 @@ +config VT + bool "Virtual terminal" if EXPERT + depends on !S390 + select INPUT + default y + ---help--- + If you say Y here, you will get support for terminal devices with + display and keyboard devices. These are called "virtual" because you + can run several virtual terminals (also called virtual consoles) on + one physical terminal. This is rather useful, for example one + virtual terminal can collect system messages and warnings, another + one can be used for a text-mode user session, and a third could run + an X session, all in parallel. Switching between virtual terminals + is done with certain key combinations, usually Alt-. + + The setterm command ("man setterm") can be used to change the + properties (such as colors or beeping) of a virtual terminal. The + man page console_codes(4) ("man console_codes") contains the special + character sequences that can be used to change those properties + directly. The fonts used on virtual terminals can be changed with + the setfont ("man setfont") command and the key bindings are defined + with the loadkeys ("man loadkeys") command. + + You need at least one virtual terminal device in order to make use + of your keyboard and monitor. Therefore, only people configuring an + embedded system would want to say N here in order to save some + memory; the only way to log into such a system is then via a serial + or network connection. + + If unsure, say Y, or else you won't be able to do much with your new + shiny Linux system :-) + +config CONSOLE_TRANSLATIONS + depends on VT + default y + bool "Enable character translations in console" if EXPERT + ---help--- + This enables support for font mapping and Unicode translation + on virtual consoles. + +config VT_CONSOLE + bool "Support for console on virtual terminal" if EXPERT + depends on VT + default y + ---help--- + The system console is the device which receives all kernel messages + and warnings and which allows logins in single user mode. If you + answer Y here, a virtual terminal (the device used to interact with + a physical terminal) can be used as system console. This is the most + common mode of operations, so you should say Y here unless you want + the kernel messages be output only to a serial port (in which case + you should say Y to "Console on serial port", below). + + If you do say Y here, by default the currently visible virtual + terminal (/dev/tty0) will be used as system console. You can change + that with a kernel command line option such as "console=tty3" which + would use the third virtual terminal as system console. (Try "man + bootparam" or see the documentation of your boot loader (lilo or + loadlin) about how to pass options to the kernel at boot time.) + + If unsure, say Y. + +config HW_CONSOLE + bool + depends on VT && !S390 && !UML + default y + +config VT_HW_CONSOLE_BINDING + bool "Support for binding and unbinding console drivers" + depends on HW_CONSOLE + default n + ---help--- + The virtual terminal is the device that interacts with the physical + terminal through console drivers. On these systems, at least one + console driver is loaded. In other configurations, additional console + drivers may be enabled, such as the framebuffer console. If more than + 1 console driver is enabled, setting this to 'y' will allow you to + select the console driver that will serve as the backend for the + virtual terminals. + + See for more + information. For framebuffer console users, please refer to + . + +config UNIX98_PTYS + bool "Unix98 PTY support" if EXPERT + default y + ---help--- + A pseudo terminal (PTY) is a software device consisting of two + halves: a master and a slave. The slave device behaves identical to + a physical terminal; the master device is used by a process to + read data from and write data to the slave, thereby emulating a + terminal. Typical programs for the master side are telnet servers + and xterms. + + Linux has traditionally used the BSD-like names /dev/ptyxx for + masters and /dev/ttyxx for slaves of pseudo terminals. This scheme + has a number of problems. The GNU C library glibc 2.1 and later, + however, supports the Unix98 naming standard: in order to acquire a + pseudo terminal, a process opens /dev/ptmx; the number of the pseudo + terminal is then made available to the process and the pseudo + terminal slave can be accessed as /dev/pts/. What was + traditionally /dev/ttyp2 will then be /dev/pts/2, for example. + + All modern Linux systems use the Unix98 ptys. Say Y unless + you're on an embedded system and want to conserve memory. + +config DEVPTS_MULTIPLE_INSTANCES + bool "Support multiple instances of devpts" + depends on UNIX98_PTYS + default n + ---help--- + Enable support for multiple instances of devpts filesystem. + If you want to have isolated PTY namespaces (eg: in containers), + say Y here. Otherwise, say N. If enabled, each mount of devpts + filesystem with the '-o newinstance' option will create an + independent PTY namespace. + +config LEGACY_PTYS + bool "Legacy (BSD) PTY support" + default y + ---help--- + A pseudo terminal (PTY) is a software device consisting of two + halves: a master and a slave. The slave device behaves identical to + a physical terminal; the master device is used by a process to + read data from and write data to the slave, thereby emulating a + terminal. Typical programs for the master side are telnet servers + and xterms. + + Linux has traditionally used the BSD-like names /dev/ptyxx + for masters and /dev/ttyxx for slaves of pseudo + terminals. This scheme has a number of problems, including + security. This option enables these legacy devices; on most + systems, it is safe to say N. + + +config LEGACY_PTY_COUNT + int "Maximum number of legacy PTY in use" + depends on LEGACY_PTYS + range 0 256 + default "256" + ---help--- + The maximum number of legacy PTYs that can be used at any one time. + The default is 256, and should be more than enough. Embedded + systems may want to reduce this to save memory. + + When not in use, each legacy PTY occupies 12 bytes on 32-bit + architectures and 24 bytes on 64-bit architectures. + + diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig new file mode 100644 index 000000000000..6f2c9809f1fb --- /dev/null +++ b/drivers/tty/hvc/Kconfig @@ -0,0 +1,105 @@ +config HVC_DRIVER + bool + help + Generic "hypervisor virtual console" infrastructure for various + hypervisors (pSeries, iSeries, Xen, lguest). + It will automatically be selected if one of the back-end console drivers + is selected. + +config HVC_IRQ + bool + +config HVC_CONSOLE + bool "pSeries Hypervisor Virtual Console support" + depends on PPC_PSERIES + select HVC_DRIVER + select HVC_IRQ + help + pSeries machines when partitioned support a hypervisor virtual + console. This driver allows each pSeries partition to have a console + which is accessed via the HMC. + +config HVC_ISERIES + bool "iSeries Hypervisor Virtual Console support" + depends on PPC_ISERIES + default y + select HVC_DRIVER + select HVC_IRQ + select VIOPATH + help + iSeries machines support a hypervisor virtual console. + +config HVC_RTAS + bool "IBM RTAS Console support" + depends on PPC_RTAS + select HVC_DRIVER + help + IBM Console device driver which makes use of RTAS + +config HVC_BEAT + bool "Toshiba's Beat Hypervisor Console support" + depends on PPC_CELLEB + select HVC_DRIVER + help + Toshiba's Cell Reference Set Beat Console device driver + +config HVC_IUCV + bool "z/VM IUCV Hypervisor console support (VM only)" + depends on S390 + select HVC_DRIVER + select IUCV + default y + help + This driver provides a Hypervisor console (HVC) back-end to access + a Linux (console) terminal via a z/VM IUCV communication path. + +config HVC_XEN + bool "Xen Hypervisor Console support" + depends on XEN + select HVC_DRIVER + select HVC_IRQ + default y + help + Xen virtual console device driver + +config HVC_UDBG + bool "udbg based fake hypervisor console" + depends on PPC && EXPERIMENTAL + select HVC_DRIVER + default n + +config HVC_DCC + bool "ARM JTAG DCC console" + depends on ARM + select HVC_DRIVER + help + This console uses the JTAG DCC on ARM to create a console under the HVC + driver. This console is used through a JTAG only on ARM. If you don't have + a JTAG then you probably don't want this option. + +config HVC_BFIN_JTAG + bool "Blackfin JTAG console" + depends on BLACKFIN + select HVC_DRIVER + help + This console uses the Blackfin JTAG to create a console under the + the HVC driver. If you don't have JTAG, then you probably don't + want this option. + +config HVCS + tristate "IBM Hypervisor Virtual Console Server support" + depends on PPC_PSERIES && HVC_CONSOLE + help + Partitionable IBM Power5 ppc64 machines allow hosting of + firmware virtual consoles from one Linux partition by + another Linux partition. This driver allows console data + from Linux partitions to be accessed through TTY device + interfaces in the device tree of a Linux partition running + this driver. + + To compile this driver as a module, choose M here: the + module will be called hvcs. Additionally, this module + will depend on arch specific APIs exported from hvcserver.ko + which will also be compiled when this driver is built as a + module. + -- cgit v1.2.2 From 10e82f6ce76351425644bccc56f8e2c2ad596ce6 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Tue, 22 Feb 2011 11:47:04 -0800 Subject: tty: simserial: now phase out the ioctl file pointer for good Alan missed the ia64 simulator serial driver (because it was hidden in arch/... rather than located under drivers/... where one might expect to find a driver). Drop the "file *" argument from rs_ioctl() in arch/ia64/hp/sim/simserial.c Signed-off-by: Tony Luck Cc: Alan Cox , Signed-off-by: Greg Kroah-Hartman --- arch/ia64/hp/sim/simserial.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 13633da0d3de..bff0824cf8a4 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -390,8 +390,7 @@ static void rs_unthrottle(struct tty_struct * tty) } -static int rs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) +static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && -- cgit v1.2.2 From 085a4f758f0cf95e1865b63892bf4304a149f0ca Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 22 Feb 2011 15:28:10 +0800 Subject: serial: mfd: remove the TX full-empty interrupts workaround In A0 stepping, TX half-empty interrupt is not working, so have to use the full-empty interrupts whose performance will be 15% lower. Now re-enable the half-empty interrrupt after it is enabled in silicon. Signed-off-by: Feng Tang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mfd.c | 26 +++++--------------------- 1 file changed, 5 insertions(+), 21 deletions(-) diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 776777462937..53ff6af16273 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -16,9 +16,7 @@ * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans * are used for RX, odd chans for TX * - * 2. In A0 stepping, UART will not support TX half empty flag - * - * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always + * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always * asserted, only when the HW is reset the DDCD and DDSR will * be triggered */ @@ -41,8 +39,6 @@ #include #include -#define MFD_HSU_A0_STEPPING 1 - #define HSU_DMA_BUF_SIZE 2048 #define chan_readl(chan, offset) readl(chan->reg + offset) @@ -543,16 +539,9 @@ static void transmit_chars(struct uart_hsu_port *up) return; } -#ifndef MFD_HSU_A0_STEPPING + /* The IRQ is for TX FIFO half-empty */ count = up->port.fifosize / 2; -#else - /* - * A0 only supports fully empty IRQ, and the first char written - * into it won't clear the EMPT bit, so we may need be cautious - * by useing a shorter buffer - */ - count = up->port.fifosize - 4; -#endif + do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -761,9 +750,8 @@ static void serial_hsu_break_ctl(struct uart_port *port, int break_state) /* * What special to do: * 1. chose the 64B fifo mode - * 2. make sure not to select half empty mode for A0 stepping - * 3. start dma or pio depends on configuration - * 4. we only allocate dma memory when needed + * 2. start dma or pio depends on configuration + * 3. we only allocate dma memory when needed */ static int serial_hsu_startup(struct uart_port *port) { @@ -967,10 +955,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; fcr |= UART_FCR_HSU_64B_FIFO; -#ifdef MFD_HSU_A0_STEPPING - /* A0 doesn't support half empty IRQ */ - fcr |= UART_FCR_FULL_EMPT_TXI; -#endif /* * Ok, we're now changing the port state. Do it with -- cgit v1.2.2 From f023eab379821365bf265a0240f30c00cecaef7c Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 22 Feb 2011 15:28:12 +0800 Subject: serial: mfd: add a module parameter for setting each port's working mode The three identical uart ports can work either in DMA or PIO mode. Adding such a module parameter "hsu_dma_enable" will enable user to chose working modes for each port. If the mfd driver is built in kernel, adding a "mfd.hsu_dma_enable=x" in kernel command line has the same effect. Signed-off-by: Feng Tang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mfd.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 53ff6af16273..c111f36f5d21 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -47,6 +47,11 @@ #define mfd_readl(obj, offset) readl(obj->reg + offset) #define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) +static int hsu_dma_enable; +module_param(hsu_dma_enable, int, 0); +MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \ +bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode."); + struct hsu_dma_buffer { u8 *buf; dma_addr_t dma_addr; @@ -1367,6 +1372,12 @@ static void hsu_global_init(void) serial_hsu_ports[i] = uport; uport->index = i; + + if (hsu_dma_enable & (1<use_dma = 1; + else + uport->use_dma = 0; + uport++; } -- cgit v1.2.2 From 2314a0f667352748a48753bf903f8c50fd2a756d Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 18 Feb 2011 16:38:37 +0100 Subject: tty: serial: altera_jtaguart: Don't use plain integer as NULL pointer This fixes a sparse warning. Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/altera_jtaguart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index f9b49b5ff5e1..0c0a8b60f2d6 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -384,7 +384,7 @@ static int __init altera_jtaguart_console_setup(struct console *co, if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS) return -EINVAL; port = &altera_jtaguart_ports[co->index].port; - if (port->membase == 0) + if (port->membase == NULL) return -ENODEV; return 0; } -- cgit v1.2.2 From 3231f075070ac61ab7174a9a82bdc6d7b1de10bb Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 18 Feb 2011 16:38:38 +0100 Subject: tty: serial: altera_jtaguart: Remove unused function early_altera_jtaguart_setup This is not even used in nios2 arch code anymore. Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/altera_jtaguart.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 0c0a8b60f2d6..94ccf4741f0e 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) -int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart - *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->flags = ASYNC_BOOT_AUTOCONF; - port->ops = &altera_jtaguart_ops; - } - - return 0; -} - #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) static void altera_jtaguart_console_putc(struct console *co, const char c) { -- cgit v1.2.2 From 72af4762ee640b717a30761e27fc55126c686568 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 18 Feb 2011 16:38:39 +0100 Subject: tty: serial: altera_jtaguart: Support getting mapbase and IRQ from resources This will make it easier to get the driver to support device tree. The old platform data method is still supported though. Also change the driver to use only one platform device per port. Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/altera_jtaguart.c | 61 +++++++++++++++++++++++++----------- 1 file changed, 42 insertions(+), 19 deletions(-) diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 94ccf4741f0e..aa2a4caaa1c3 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -409,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev) { struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; struct uart_port *port; - int i; + struct resource *res_irq, *res_mem; + int i = pdev->id; - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; + /* -1 emphasizes that the platform must have one port, no .N suffix */ + if (i == -1) + i = 0; - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->ops = &altera_jtaguart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; + if (i >= ALTERA_JTAGUART_MAXPORTS) + return -EINVAL; - uart_add_one_port(&altera_jtaguart_driver, port); - } + port = &altera_jtaguart_ports[i].port; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem) + port->mapbase = res_mem->start; + else if (platp) + port->mapbase = platp->mapbase; + else + return -ENODEV; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + port->irq = res_irq->start; + else if (platp) + port->irq = platp->irq; + else + return -ENODEV; + + port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); + if (!port->membase) + return -ENOMEM; + + port->line = i; + port->type = PORT_ALTERA_JTAGUART; + port->iotype = SERIAL_IO_MEM; + port->ops = &altera_jtaguart_ops; + port->flags = ASYNC_BOOT_AUTOCONF; + + uart_add_one_port(&altera_jtaguart_driver, port); return 0; } @@ -432,13 +455,13 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev) static int __devexit altera_jtaguart_remove(struct platform_device *pdev) { struct uart_port *port; - int i; + int i = pdev->id; - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) { - port = &altera_jtaguart_ports[i].port; - if (port) - uart_remove_one_port(&altera_jtaguart_driver, port); - } + if (i == -1) + i = 0; + + port = &altera_jtaguart_ports[i].port; + uart_remove_one_port(&altera_jtaguart_driver, port); return 0; } -- cgit v1.2.2 From 44ed76b78e158d852f640d533b7acc08b91f2132 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 18 Feb 2011 16:38:40 +0100 Subject: tty: serial: altera_jtaguart: Fixup type usage of port flags port->flags is of type upf_t, which corresponds to UPF_* flags. Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/altera_jtaguart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index aa2a4caaa1c3..8f014bb916b7 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -445,7 +445,7 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev) port->type = PORT_ALTERA_JTAGUART; port->iotype = SERIAL_IO_MEM; port->ops = &altera_jtaguart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; + port->flags = UPF_BOOT_AUTOCONF; uart_add_one_port(&altera_jtaguart_driver, port); -- cgit v1.2.2 From a6afd9f3e819de4795fcd356e5bfad446e4323f2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 22 Feb 2011 16:14:56 -0800 Subject: tty: move a number of tty drivers from drivers/char/ to drivers/tty/ As planned by Arnd Bergmann, this moves the following drivers from drivers/char/ to drivers/tty/ as that's where they really belong: amiserial nozomi synclink rocket cyclades moxa mxser isicom bfin_jtag_comm Cc: Arnd Bergmann Cc: Alan Cox Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/char/Kconfig | 172 - drivers/char/Makefile | 11 - drivers/char/amiserial.c | 2178 ----------- drivers/char/bfin_jtag_comm.c | 366 -- drivers/char/cyclades.c | 4200 --------------------- drivers/char/isicom.c | 1736 --------- drivers/char/moxa.c | 2092 ----------- drivers/char/moxa.h | 304 -- drivers/char/mxser.c | 2757 -------------- drivers/char/mxser.h | 150 - drivers/char/nozomi.c | 1993 ---------- drivers/char/rocket.c | 3199 ---------------- drivers/char/rocket.h | 111 - drivers/char/rocket_int.h | 1214 ------ drivers/char/synclink.c | 8119 ----------------------------------------- drivers/char/synclink_gt.c | 5161 -------------------------- drivers/char/synclinkmp.c | 5600 ---------------------------- drivers/tty/Kconfig | 171 + drivers/tty/Makefile | 13 + drivers/tty/amiserial.c | 2178 +++++++++++ drivers/tty/bfin_jtag_comm.c | 366 ++ drivers/tty/cyclades.c | 4200 +++++++++++++++++++++ drivers/tty/isicom.c | 1736 +++++++++ drivers/tty/moxa.c | 2092 +++++++++++ drivers/tty/moxa.h | 304 ++ drivers/tty/mxser.c | 2757 ++++++++++++++ drivers/tty/mxser.h | 150 + drivers/tty/nozomi.c | 1993 ++++++++++ drivers/tty/rocket.c | 3199 ++++++++++++++++ drivers/tty/rocket.h | 111 + drivers/tty/rocket_int.h | 1214 ++++++ drivers/tty/synclink.c | 8119 +++++++++++++++++++++++++++++++++++++++++ drivers/tty/synclink_gt.c | 5161 ++++++++++++++++++++++++++ drivers/tty/synclinkmp.c | 5600 ++++++++++++++++++++++++++++ 34 files changed, 39364 insertions(+), 39363 deletions(-) delete mode 100644 drivers/char/amiserial.c delete mode 100644 drivers/char/bfin_jtag_comm.c delete mode 100644 drivers/char/cyclades.c delete mode 100644 drivers/char/isicom.c delete mode 100644 drivers/char/moxa.c delete mode 100644 drivers/char/moxa.h delete mode 100644 drivers/char/mxser.c delete mode 100644 drivers/char/mxser.h delete mode 100644 drivers/char/nozomi.c delete mode 100644 drivers/char/rocket.c delete mode 100644 drivers/char/rocket.h delete mode 100644 drivers/char/rocket_int.h delete mode 100644 drivers/char/synclink.c delete mode 100644 drivers/char/synclink_gt.c delete mode 100644 drivers/char/synclinkmp.c create mode 100644 drivers/tty/amiserial.c create mode 100644 drivers/tty/bfin_jtag_comm.c create mode 100644 drivers/tty/cyclades.c create mode 100644 drivers/tty/isicom.c create mode 100644 drivers/tty/moxa.c create mode 100644 drivers/tty/moxa.h create mode 100644 drivers/tty/mxser.c create mode 100644 drivers/tty/mxser.h create mode 100644 drivers/tty/nozomi.c create mode 100644 drivers/tty/rocket.c create mode 100644 drivers/tty/rocket.h create mode 100644 drivers/tty/rocket_int.h create mode 100644 drivers/tty/synclink.c create mode 100644 drivers/tty/synclink_gt.c create mode 100644 drivers/tty/synclinkmp.c diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 9b9ab867f50e..1adfac6a7b0b 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -15,36 +15,6 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". -config BFIN_JTAG_COMM - tristate "Blackfin JTAG Communication" - depends on BLACKFIN - help - Add support for emulating a TTY device over the Blackfin JTAG. - - To compile this driver as a module, choose M here: the - module will be called bfin_jtag_comm. - -config BFIN_JTAG_COMM_CONSOLE - bool "Console on Blackfin JTAG" - depends on BFIN_JTAG_COMM=y - -config SERIAL_NONSTANDARD - bool "Non-standard serial port support" - depends on HAS_IOMEM - ---help--- - Say Y here if you have any non-standard serial boards -- boards - which aren't supported using the standard "dumb" serial driver. - This includes intelligent serial boards such as Cyclades, - Digiboards, etc. These are usually used for systems that need many - serial ports because they serve many terminals or dial-in - connections. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about non-standard serial boards. - - Most people can say N here. - config COMPUTONE tristate "Computone IntelliPort Plus serial support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) @@ -60,50 +30,6 @@ config COMPUTONE To compile this driver as module, choose M here: the module will be called ip2. -config ROCKETPORT - tristate "Comtrol RocketPort support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - help - This driver supports Comtrol RocketPort and RocketModem PCI boards. - These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or - modems. For information about the RocketPort/RocketModem boards - and this driver read . - - To compile this driver as a module, choose M here: the - module will be called rocket. - - If you want to compile this driver into the kernel, say Y here. If - you don't have a Comtrol RocketPort/RocketModem card installed, say N. - -config CYCLADES - tristate "Cyclades async mux support" - depends on SERIAL_NONSTANDARD && (PCI || ISA) - select FW_LOADER - ---help--- - This driver supports Cyclades Z and Y multiserial boards. - You would need something like this to connect more than two modems to - your Linux box, for instance in order to become a dial-in server. - - For information about the Cyclades-Z card, read - . - - To compile this driver as a module, choose M here: the - module will be called cyclades. - - If you haven't heard about it, it's safe to say N. - -config CYZ_INTR - bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)" - depends on EXPERIMENTAL && CYCLADES - help - The Cyclades-Z family of multiport cards allows 2 (two) driver op - modes: polling and interrupt. In polling mode, the driver will check - the status of the Cyclades-Z ports every certain amount of time - (which is called polling cycle and is configurable). In interrupt - mode, it will use an interrupt line (IRQ) in order to check the - status of the Cyclades-Z ports. The default op mode is polling. If - unsure, say N. - config DIGIEPCA tristate "Digiboard Intelligent Async Support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) @@ -119,94 +45,6 @@ config DIGIEPCA To compile this driver as a module, choose M here: the module will be called epca. -config MOXA_INTELLIO - tristate "Moxa Intellio support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - select FW_LOADER - help - Say Y here if you have a Moxa Intellio multiport serial card. - - To compile this driver as a module, choose M here: the - module will be called moxa. - -config MOXA_SMARTIO - tristate "Moxa SmartIO support v. 2.0" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) - help - Say Y here if you have a Moxa SmartIO multiport serial card and/or - want to help develop a new version of this driver. - - This is upgraded (1.9.1) driver from original Moxa drivers with - changes finally resulting in PCI probing. - - This driver can also be built as a module. The module will be called - mxser. If you want to do that, say M here. - -config ISI - tristate "Multi-Tech multiport card support (EXPERIMENTAL)" - depends on SERIAL_NONSTANDARD && PCI - select FW_LOADER - help - This is a driver for the Multi-Tech cards which provide several - serial ports. The driver is experimental and can currently only be - built as a module. The module will be called isicom. - If you want to do that, choose M here. - -config SYNCLINK - tristate "Microgate SyncLink card support" - depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API - help - Provides support for the SyncLink ISA and PCI multiprotocol serial - adapters. These adapters support asynchronous and HDLC bit - synchronous communication up to 10Mbps (PCI adapter). - - This driver can only be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclink. If you want to do that, say M - here. - -config SYNCLINKMP - tristate "SyncLink Multiport support" - depends on SERIAL_NONSTANDARD && PCI - help - Enable support for the SyncLink Multiport (2 or 4 ports) - serial adapter, running asynchronous and HDLC communications up - to 2.048Mbps. Each ports is independently selectable for - RS-232, V.35, RS-449, RS-530, and X.21 - - This driver may be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclinkmp. If you want to do that, say M - here. - -config SYNCLINK_GT - tristate "SyncLink GT/AC support" - depends on SERIAL_NONSTANDARD && PCI - help - Support for SyncLink GT and SyncLink AC families of - synchronous and asynchronous serial adapters - manufactured by Microgate Systems, Ltd. (www.microgate.com) - -config N_HDLC - tristate "HDLC line discipline support" - depends on SERIAL_NONSTANDARD - help - Allows synchronous HDLC communications with tty device drivers that - support synchronous HDLC such as the Microgate SyncLink adapter. - - This driver can be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called n_hdlc. If you want to do that, say M - here. - -config N_GSM - tristate "GSM MUX line discipline support (EXPERIMENTAL)" - depends on EXPERIMENTAL - depends on NET - help - This line discipline provides support for the GSM MUX protocol and - presents the mux as a set of 61 individual tty devices. - config RISCOM8 tristate "SDL RISCom/8 card support" depends on SERIAL_NONSTANDARD @@ -296,16 +134,6 @@ config ISTALLION To compile this driver as a module, choose M here: the module will be called istallion. -config NOZOMI - tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" - depends on PCI && EXPERIMENTAL - help - If you have a HSDPA driver Broadband Wireless Data Card - - Globe Trotter PCMCIA card, say Y here. - - To compile this driver as a module, choose M here, the module - will be called nozomi. - config A2232 tristate "Commodore A2232 serial support (EXPERIMENTAL)" depends on EXPERIMENTAL && ZORRO && BROKEN diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 5bc765d4c3ca..f5dc7c9bce6b 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -5,29 +5,18 @@ obj-y += mem.o random.o obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o obj-y += misc.o -obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_ROCKETPORT) += rocket.o obj-$(CONFIG_SERIAL167) += serial167.o -obj-$(CONFIG_CYCLADES) += cyclades.o obj-$(CONFIG_STALLION) += stallion.o obj-$(CONFIG_ISTALLION) += istallion.o -obj-$(CONFIG_NOZOMI) += nozomi.o obj-$(CONFIG_DIGIEPCA) += epca.o obj-$(CONFIG_SPECIALIX) += specialix.o -obj-$(CONFIG_MOXA_INTELLIO) += moxa.o obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -obj-$(CONFIG_MOXA_SMARTIO) += mxser.o obj-$(CONFIG_COMPUTONE) += ip2/ obj-$(CONFIG_RISCOM8) += riscom8.o -obj-$(CONFIG_ISI) += isicom.o -obj-$(CONFIG_SYNCLINK) += synclink.o -obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o -obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o -obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o obj-$(CONFIG_SX) += sx.o generic_serial.o obj-$(CONFIG_RIO) += rio/ generic_serial.o obj-$(CONFIG_RAW_DRIVER) += raw.o diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c deleted file mode 100644 index f214e5022472..000000000000 --- a/drivers/char/amiserial.c +++ /dev/null @@ -1,2178 +0,0 @@ -/* - * linux/drivers/char/amiserial.c - * - * Serial driver for the amiga builtin port. - * - * This code was created by taking serial.c version 4.30 from kernel - * release 2.3.22, replacing all hardware related stuff with the - * corresponding amiga hardware actions, and removing all irrelevant - * code. As a consequence, it uses many of the constants and names - * associated with the registers and bits of 16550 compatible UARTS - - * but only to keep track of status, etc in the state variables. It - * was done this was to make it easier to keep the code in line with - * (non hardware specific) changes to serial.c. - * - * The port is registered with the tty driver as minor device 64, and - * therefore other ports should should only use 65 upwards. - * - * Richard Lucock 28/12/99 - * - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, - * 1998, 1999 Theodore Ts'o - * - */ - -/* - * Serial driver configuration section. Here are the various options: - * - * SERIAL_PARANOIA_CHECK - * Check the magic number for the async_structure where - * ever possible. - */ - -#include - -#undef SERIAL_PARANOIA_CHECK -#define SERIAL_DO_RESTART - -/* Set of debugging defines */ - -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW -#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - -/* Sanity checks */ - -#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) -#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ - tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s) -#else -#define DBG_CNT(s) -#endif - -/* - * End of serial driver configuration section. - */ - -#include - -#include -#include -#include -#include -static char *serial_version = "4.30"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#include - -#include -#include - -#define custom amiga_custom -static char *serial_name = "Amiga-builtin serial driver"; - -static struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -static struct async_struct *IRQ_ports; - -static unsigned char current_ctl_bits; - -static void change_speed(struct async_struct *info, struct ktermios *old); -static void rs_wait_until_sent(struct tty_struct *tty, int timeout); - - -static struct serial_state rs_table[1]; - -#define NR_PORTS ARRAY_SIZE(rs_table) - -#include - -#define serial_isroot() (capable(CAP_SYS_ADMIN)) - - -static inline int serial_paranoia_check(struct async_struct *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for serial struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null async_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != SERIAL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* some serial hardware definitions */ -#define SDR_OVRUN (1<<15) -#define SDR_RBF (1<<14) -#define SDR_TBE (1<<13) -#define SDR_TSRE (1<<12) - -#define SERPER_PARENB (1<<15) - -#define AC_SETCLR (1<<15) -#define AC_UARTBRK (1<<11) - -#define SER_DTR (1<<7) -#define SER_RTS (1<<6) -#define SER_DCD (1<<5) -#define SER_CTS (1<<4) -#define SER_DSR (1<<3) - -static __inline__ void rtsdtr_ctrl(int bits) -{ - ciab.pra = ((bits & (SER_RTS | SER_DTR)) ^ (SER_RTS | SER_DTR)) | (ciab.pra & ~(SER_RTS | SER_DTR)); -} - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rs_stop(struct tty_struct *tty) -{ - struct async_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - /* disable Tx interrupt and remove any pending interrupts */ - custom.intena = IF_TBE; - mb(); - custom.intreq = IF_TBE; - mb(); - } - local_irq_restore(flags); -} - -static void rs_start(struct tty_struct *tty) -{ - struct async_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_start")) - return; - - local_irq_save(flags); - if (info->xmit.head != info->xmit.tail - && info->xmit.buf - && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - custom.intena = IF_SETCLR | IF_TBE; - mb(); - /* set a pending Tx Interrupt, transmitter should restart now */ - custom.intreq = IF_SETCLR | IF_TBE; - mb(); - } - local_irq_restore(flags); -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. - */ -static void rs_sched_event(struct async_struct *info, - int event) -{ - info->event |= 1 << event; - tasklet_schedule(&info->tlet); -} - -static void receive_chars(struct async_struct *info) -{ - int status; - int serdatr; - struct tty_struct *tty = info->tty; - unsigned char ch, flag; - struct async_icount *icount; - int oe = 0; - - icount = &info->state->icount; - - status = UART_LSR_DR; /* We obviously have a character! */ - serdatr = custom.serdatr; - mb(); - custom.intreq = IF_RBF; - mb(); - - if((serdatr & 0x1ff) == 0) - status |= UART_LSR_BI; - if(serdatr & SDR_OVRUN) - status |= UART_LSR_OE; - - ch = serdatr & 0xff; - icount->rx++; - -#ifdef SERIAL_DEBUG_INTR - printk("DR%02x:%02x...", ch, status); -#endif - flag = TTY_NORMAL; - - /* - * We don't handle parity or frame errors - but I have left - * the code in, since I'm not sure that the errors can't be - * detected. - */ - - if (status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE)) { - /* - * For statistics only - */ - if (status & UART_LSR_BI) { - status &= ~(UART_LSR_FE | UART_LSR_PE); - icount->brk++; - } else if (status & UART_LSR_PE) - icount->parity++; - else if (status & UART_LSR_FE) - icount->frame++; - if (status & UART_LSR_OE) - icount->overrun++; - - /* - * Now check to see if character should be - * ignored, and mask off conditions which - * should be ignored. - */ - if (status & info->ignore_status_mask) - goto out; - - status &= info->read_status_mask; - - if (status & (UART_LSR_BI)) { -#ifdef SERIAL_DEBUG_INTR - printk("handling break...."); -#endif - flag = TTY_BREAK; - if (info->flags & ASYNC_SAK) - do_SAK(tty); - } else if (status & UART_LSR_PE) - flag = TTY_PARITY; - else if (status & UART_LSR_FE) - flag = TTY_FRAME; - if (status & UART_LSR_OE) { - /* - * Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - oe = 1; - } - } - tty_insert_flip_char(tty, ch, flag); - if (oe == 1) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - tty_flip_buffer_push(tty); -out: - return; -} - -static void transmit_chars(struct async_struct *info) -{ - custom.intreq = IF_TBE; - mb(); - if (info->x_char) { - custom.serdat = info->x_char | 0x100; - mb(); - info->state->icount.tx++; - info->x_char = 0; - return; - } - if (info->xmit.head == info->xmit.tail - || info->tty->stopped - || info->tty->hw_stopped) { - info->IER &= ~UART_IER_THRI; - custom.intena = IF_TBE; - mb(); - return; - } - - custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100; - mb(); - info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1); - info->state->icount.tx++; - - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE) < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - -#ifdef SERIAL_DEBUG_INTR - printk("THRE..."); -#endif - if (info->xmit.head == info->xmit.tail) { - custom.intena = IF_TBE; - mb(); - info->IER &= ~UART_IER_THRI; - } -} - -static void check_modem_status(struct async_struct *info) -{ - unsigned char status = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); - unsigned char dstatus; - struct async_icount *icount; - - /* Determine bits that have changed */ - dstatus = status ^ current_ctl_bits; - current_ctl_bits = status; - - if (dstatus) { - icount = &info->state->icount; - /* update input line counters */ - if (dstatus & SER_DSR) - icount->dsr++; - if (dstatus & SER_DCD) { - icount->dcd++; -#ifdef CONFIG_HARD_PPS - if ((info->flags & ASYNC_HARDPPS_CD) && - !(status & SER_DCD)) - hardpps(); -#endif - } - if (dstatus & SER_CTS) - icount->cts++; - wake_up_interruptible(&info->delta_msr_wait); - } - - if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) { -#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) - printk("ttyS%d CD now %s...", info->line, - (!(status & SER_DCD)) ? "on" : "off"); -#endif - if (!(status & SER_DCD)) - wake_up_interruptible(&info->open_wait); - else { -#ifdef SERIAL_DEBUG_OPEN - printk("doing serial hangup..."); -#endif - if (info->tty) - tty_hangup(info->tty); - } - } - if (info->flags & ASYNC_CTS_FLOW) { - if (info->tty->hw_stopped) { - if (!(status & SER_CTS)) { -#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) - printk("CTS tx start..."); -#endif - info->tty->hw_stopped = 0; - info->IER |= UART_IER_THRI; - custom.intena = IF_SETCLR | IF_TBE; - mb(); - /* set a pending Tx Interrupt, transmitter should restart now */ - custom.intreq = IF_SETCLR | IF_TBE; - mb(); - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - return; - } - } else { - if ((status & SER_CTS)) { -#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) - printk("CTS tx stop..."); -#endif - info->tty->hw_stopped = 1; - info->IER &= ~UART_IER_THRI; - /* disable Tx interrupt and remove any pending interrupts */ - custom.intena = IF_TBE; - mb(); - custom.intreq = IF_TBE; - mb(); - } - } - } -} - -static irqreturn_t ser_vbl_int( int irq, void *data) -{ - /* vbl is just a periodic interrupt we tie into to update modem status */ - struct async_struct * info = IRQ_ports; - /* - * TBD - is it better to unregister from this interrupt or to - * ignore it if MSI is clear ? - */ - if(info->IER & UART_IER_MSI) - check_modem_status(info); - return IRQ_HANDLED; -} - -static irqreturn_t ser_rx_int(int irq, void *dev_id) -{ - struct async_struct * info; - -#ifdef SERIAL_DEBUG_INTR - printk("ser_rx_int..."); -#endif - - info = IRQ_ports; - if (!info || !info->tty) - return IRQ_NONE; - - receive_chars(info); - info->last_active = jiffies; -#ifdef SERIAL_DEBUG_INTR - printk("end.\n"); -#endif - return IRQ_HANDLED; -} - -static irqreturn_t ser_tx_int(int irq, void *dev_id) -{ - struct async_struct * info; - - if (custom.serdatr & SDR_TBE) { -#ifdef SERIAL_DEBUG_INTR - printk("ser_tx_int..."); -#endif - - info = IRQ_ports; - if (!info || !info->tty) - return IRQ_NONE; - - transmit_chars(info); - info->last_active = jiffies; -#ifdef SERIAL_DEBUG_INTR - printk("end.\n"); -#endif - } - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -/* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using rs_sched_event(), and they get done here. - */ - -static void do_softint(unsigned long private_) -{ - struct async_struct *info = (struct async_struct *) private_; - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - -/* - * --------------------------------------------------------------- - * Low level utility subroutines for the serial driver: routines to - * figure out the appropriate timeout for an interrupt chain, routines - * to initialize and startup a serial port, and routines to shutdown a - * serial port. Useful stuff like that. - * --------------------------------------------------------------- - */ - -static int startup(struct async_struct * info) -{ - unsigned long flags; - int retval=0; - unsigned long page; - - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - local_irq_save(flags); - - if (info->flags & ASYNC_INITIALIZED) { - free_page(page); - goto errout; - } - - if (info->xmit.buf) - free_page(page); - else - info->xmit.buf = (unsigned char *) page; - -#ifdef SERIAL_DEBUG_OPEN - printk("starting up ttys%d ...", info->line); -#endif - - /* Clear anything in the input buffer */ - - custom.intreq = IF_RBF; - mb(); - - retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info); - if (retval) { - if (serial_isroot()) { - if (info->tty) - set_bit(TTY_IO_ERROR, - &info->tty->flags); - retval = 0; - } - goto errout; - } - - /* enable both Rx and Tx interrupts */ - custom.intena = IF_SETCLR | IF_RBF | IF_TBE; - mb(); - info->IER = UART_IER_MSI; - - /* remember current state of the DCD and CTS bits */ - current_ctl_bits = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); - - IRQ_ports = info; - - info->MCR = 0; - if (info->tty->termios->c_cflag & CBAUD) - info->MCR = SER_DTR | SER_RTS; - rtsdtr_ctrl(info->MCR); - - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); - info->xmit.head = info->xmit.tail = 0; - - /* - * Set up the tty->alt_speed kludge - */ - if (info->tty) { - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - } - - /* - * and set the speed of the serial port - */ - change_speed(info, NULL); - - info->flags |= ASYNC_INITIALIZED; - local_irq_restore(flags); - return 0; - -errout: - local_irq_restore(flags); - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct async_struct * info) -{ - unsigned long flags; - struct serial_state *state; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - state = info->state; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d ....\n", info->line); -#endif - - local_irq_save(flags); /* Disable interrupts */ - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->delta_msr_wait); - - IRQ_ports = NULL; - - /* - * Free the IRQ, if necessary - */ - free_irq(IRQ_AMIGA_VERTB, info); - - if (info->xmit.buf) { - free_page((unsigned long) info->xmit.buf); - info->xmit.buf = NULL; - } - - info->IER = 0; - custom.intena = IF_RBF | IF_TBE; - mb(); - - /* disable break condition */ - custom.adkcon = AC_UARTBRK; - mb(); - - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - info->MCR &= ~(SER_DTR|SER_RTS); - rtsdtr_ctrl(info->MCR); - - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); -} - - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void change_speed(struct async_struct *info, - struct ktermios *old_termios) -{ - int quot = 0, baud_base, baud; - unsigned cflag, cval = 0; - int bits; - unsigned long flags; - - if (!info->tty || !info->tty->termios) - return; - cflag = info->tty->termios->c_cflag; - - /* Byte size is always 8 bits plus parity bit if requested */ - - cval = 3; bits = 10; - if (cflag & CSTOPB) { - cval |= 0x04; - bits++; - } - if (cflag & PARENB) { - cval |= UART_LCR_PARITY; - bits++; - } - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(info->tty); - if (!baud) - baud = 9600; /* B0 transition handled in rs_set_termios */ - baud_base = info->state->baud_base; - if (baud == 38400 && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) - quot = info->state->custom_divisor; - else { - if (baud == 134) - /* Special case since 134 is really 134.5 */ - quot = (2*baud_base / 269); - else if (baud) - quot = baud_base / baud; - } - /* If the quotient is zero refuse the change */ - if (!quot && old_termios) { - /* FIXME: Will need updating for new tty in the end */ - info->tty->termios->c_cflag &= ~CBAUD; - info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); - baud = tty_get_baud_rate(info->tty); - if (!baud) - baud = 9600; - if (baud == 38400 && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) - quot = info->state->custom_divisor; - else { - if (baud == 134) - /* Special case since 134 is really 134.5 */ - quot = (2*baud_base / 269); - else if (baud) - quot = baud_base / baud; - } - } - /* As a last resort, if the quotient is zero, default to 9600 bps */ - if (!quot) - quot = baud_base / 9600; - info->quot = quot; - info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base); - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - if (info->flags & ASYNC_HARDPPS_CD) - info->IER |= UART_IER_MSI; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - } else - info->flags &= ~ASYNC_CTS_FLOW; - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - /* TBD: - * Does clearing IER_MSI imply that we should disable the VBL interrupt ? - */ - - /* - * Set up parity check flag - */ - - info->read_status_mask = UART_LSR_OE | UART_LSR_DR; - if (I_INPCK(info->tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) - info->read_status_mask |= UART_LSR_BI; - - /* - * Characters to ignore - */ - info->ignore_status_mask = 0; - if (I_IGNPAR(info->tty)) - info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (I_IGNBRK(info->tty)) { - info->ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->tty)) - info->ignore_status_mask |= UART_LSR_OE; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - info->ignore_status_mask |= UART_LSR_DR; - local_irq_save(flags); - - { - short serper; - - /* Set up the baud rate */ - serper = quot - 1; - - /* Enable or disable parity bit */ - - if(cval & UART_LCR_PARITY) - serper |= (SERPER_PARENB); - - custom.serper = serper; - mb(); - } - - info->LCR = cval; /* Save LCR */ - local_irq_restore(flags); -} - -static int rs_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct async_struct *info; - unsigned long flags; - - info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_put_char")) - return 0; - - if (!info->xmit.buf) - return 0; - - local_irq_save(flags); - if (CIRC_SPACE(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE) == 0) { - local_irq_restore(flags); - return 0; - } - - info->xmit.buf[info->xmit.head++] = ch; - info->xmit.head &= SERIAL_XMIT_SIZE-1; - local_irq_restore(flags); - return 1; -} - -static void rs_flush_chars(struct tty_struct *tty) -{ - struct async_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) - return; - - if (info->xmit.head == info->xmit.tail - || tty->stopped - || tty->hw_stopped - || !info->xmit.buf) - return; - - local_irq_save(flags); - info->IER |= UART_IER_THRI; - custom.intena = IF_SETCLR | IF_TBE; - mb(); - /* set a pending Tx Interrupt, transmitter should restart now */ - custom.intreq = IF_SETCLR | IF_TBE; - mb(); - local_irq_restore(flags); -} - -static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count) -{ - int c, ret = 0; - struct async_struct *info; - unsigned long flags; - - info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!info->xmit.buf) - return 0; - - local_irq_save(flags); - while (1) { - c = CIRC_SPACE_TO_END(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE); - if (count < c) - c = count; - if (c <= 0) { - break; - } - memcpy(info->xmit.buf + info->xmit.head, buf, c); - info->xmit.head = ((info->xmit.head + c) & - (SERIAL_XMIT_SIZE-1)); - buf += c; - count -= c; - ret += c; - } - local_irq_restore(flags); - - if (info->xmit.head != info->xmit.tail - && !tty->stopped - && !tty->hw_stopped - && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - local_irq_disable(); - custom.intena = IF_SETCLR | IF_TBE; - mb(); - /* set a pending Tx Interrupt, transmitter should restart now */ - custom.intreq = IF_SETCLR | IF_TBE; - mb(); - local_irq_restore(flags); - } - return ret; -} - -static int rs_write_room(struct tty_struct *tty) -{ - struct async_struct *info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -static int rs_chars_in_buffer(struct tty_struct *tty) -{ - struct async_struct *info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -static void rs_flush_buffer(struct tty_struct *tty) -{ - struct async_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - local_irq_save(flags); - info->xmit.head = info->xmit.tail = 0; - local_irq_restore(flags); - tty_wakeup(tty); -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void rs_send_xchar(struct tty_struct *tty, char ch) -{ - struct async_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_send_char")) - return; - - info->x_char = ch; - if (ch) { - /* Make sure transmit interrupts are on */ - - /* Check this ! */ - local_irq_save(flags); - if(!(custom.intenar & IF_TBE)) { - custom.intena = IF_SETCLR | IF_TBE; - mb(); - /* set a pending Tx Interrupt, transmitter should restart now */ - custom.intreq = IF_SETCLR | IF_TBE; - mb(); - } - local_irq_restore(flags); - - info->IER |= UART_IER_THRI; - } -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_throttle(struct tty_struct * tty) -{ - struct async_struct *info = tty->driver_data; - unsigned long flags; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - if (I_IXOFF(tty)) - rs_send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) - info->MCR &= ~SER_RTS; - - local_irq_save(flags); - rtsdtr_ctrl(info->MCR); - local_irq_restore(flags); -} - -static void rs_unthrottle(struct tty_struct * tty) -{ - struct async_struct *info = tty->driver_data; - unsigned long flags; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - rs_send_xchar(tty, START_CHAR(tty)); - } - if (tty->termios->c_cflag & CRTSCTS) - info->MCR |= SER_RTS; - local_irq_save(flags); - rtsdtr_ctrl(info->MCR); - local_irq_restore(flags); -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int get_serial_info(struct async_struct * info, - struct serial_struct __user * retinfo) -{ - struct serial_struct tmp; - struct serial_state *state = info->state; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tty_lock(); - tmp.type = state->type; - tmp.line = state->line; - tmp.port = state->port; - tmp.irq = state->irq; - tmp.flags = state->flags; - tmp.xmit_fifo_size = state->xmit_fifo_size; - tmp.baud_base = state->baud_base; - tmp.close_delay = state->close_delay; - tmp.closing_wait = state->closing_wait; - tmp.custom_divisor = state->custom_divisor; - tty_unlock(); - if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int set_serial_info(struct async_struct * info, - struct serial_struct __user * new_info) -{ - struct serial_struct new_serial; - struct serial_state old_state, *state; - unsigned int change_irq,change_port; - int retval = 0; - - if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) - return -EFAULT; - - tty_lock(); - state = info->state; - old_state = *state; - - change_irq = new_serial.irq != state->irq; - change_port = (new_serial.port != state->port); - if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) { - tty_unlock(); - return -EINVAL; - } - - if (!serial_isroot()) { - if ((new_serial.baud_base != state->baud_base) || - (new_serial.close_delay != state->close_delay) || - (new_serial.xmit_fifo_size != state->xmit_fifo_size) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (state->flags & ~ASYNC_USR_MASK))) - return -EPERM; - state->flags = ((state->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - state->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - if (new_serial.baud_base < 9600) { - tty_unlock(); - return -EINVAL; - } - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - state->baud_base = new_serial.baud_base; - state->flags = ((state->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | - (info->flags & ASYNC_INTERNAL_FLAGS)); - state->custom_divisor = new_serial.custom_divisor; - state->close_delay = new_serial.close_delay * HZ/100; - state->closing_wait = new_serial.closing_wait * HZ/100; - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - -check_and_exit: - if (info->flags & ASYNC_INITIALIZED) { - if (((old_state.flags & ASYNC_SPD_MASK) != - (state->flags & ASYNC_SPD_MASK)) || - (old_state.custom_divisor != state->custom_divisor)) { - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - change_speed(info, NULL); - } - } else - retval = startup(info); - tty_unlock(); - return retval; -} - - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct async_struct * info, unsigned int __user *value) -{ - unsigned char status; - unsigned int result; - unsigned long flags; - - local_irq_save(flags); - status = custom.serdatr; - mb(); - local_irq_restore(flags); - result = ((status & SDR_TSRE) ? TIOCSER_TEMT : 0); - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - - -static int rs_tiocmget(struct tty_struct *tty) -{ - struct async_struct * info = tty->driver_data; - unsigned char control, status; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - control = info->MCR; - local_irq_save(flags); - status = ciab.pra; - local_irq_restore(flags); - return ((control & SER_RTS) ? TIOCM_RTS : 0) - | ((control & SER_DTR) ? TIOCM_DTR : 0) - | (!(status & SER_DCD) ? TIOCM_CAR : 0) - | (!(status & SER_DSR) ? TIOCM_DSR : 0) - | (!(status & SER_CTS) ? TIOCM_CTS : 0); -} - -static int rs_tiocmset(struct tty_struct *tty, unsigned int set, - unsigned int clear) -{ - struct async_struct * info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - local_irq_save(flags); - if (set & TIOCM_RTS) - info->MCR |= SER_RTS; - if (set & TIOCM_DTR) - info->MCR |= SER_DTR; - if (clear & TIOCM_RTS) - info->MCR &= ~SER_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~SER_DTR; - rtsdtr_ctrl(info->MCR); - local_irq_restore(flags); - return 0; -} - -/* - * rs_break() --- routine which turns the break handling on or off - */ -static int rs_break(struct tty_struct *tty, int break_state) -{ - struct async_struct * info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_break")) - return -EINVAL; - - local_irq_save(flags); - if (break_state == -1) - custom.adkcon = AC_SETCLR | AC_UARTBRK; - else - custom.adkcon = AC_UARTBRK; - mb(); - local_irq_restore(flags); - return 0; -} - -/* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -static int rs_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct async_struct *info = tty->driver_data; - struct async_icount cnow; - unsigned long flags; - - local_irq_save(flags); - cnow = info->state->icount; - local_irq_restore(flags); - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -static int rs_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct async_struct * info = tty->driver_data; - struct async_icount cprev, cnow; /* kernel counter temps */ - void __user *argp = (void __user *)arg; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TIOCGSERIAL: - return get_serial_info(info, argp); - case TIOCSSERIAL: - return set_serial_info(info, argp); - case TIOCSERCONFIG: - return 0; - - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, argp); - - case TIOCSERGSTRUCT: - if (copy_to_user(argp, - info, sizeof(struct async_struct))) - return -EFAULT; - return 0; - - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - local_irq_save(flags); - /* note the counters on entry */ - cprev = info->state->icount; - local_irq_restore(flags); - while (1) { - interruptible_sleep_on(&info->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - local_irq_save(flags); - cnow = info->state->icount; /* atomic copy */ - local_irq_restore(flags); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - - case TIOCSERGWILD: - case TIOCSERSWILD: - /* "setserial -W" is called in Debian boot */ - printk ("TIOCSER?WILD ioctl obsolete, ignored.\n"); - return 0; - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct async_struct *info = tty->driver_data; - unsigned long flags; - unsigned int cflag = tty->termios->c_cflag; - - change_speed(info, old_termios); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && - !(cflag & CBAUD)) { - info->MCR &= ~(SER_DTR|SER_RTS); - local_irq_save(flags); - rtsdtr_ctrl(info->MCR); - local_irq_restore(flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - (cflag & CBAUD)) { - info->MCR |= SER_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) { - info->MCR |= SER_RTS; - } - local_irq_save(flags); - rtsdtr_ctrl(info->MCR); - local_irq_restore(flags); - } - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rs_start(tty); - } - -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); -#endif -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void rs_close(struct tty_struct *tty, struct file * filp) -{ - struct async_struct * info = tty->driver_data; - struct serial_state *state; - unsigned long flags; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - state = info->state; - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - DBG_CNT("before DEC-hung"); - local_irq_restore(flags); - return; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_close ttys%d, count = %d\n", info->line, state->count); -#endif - if ((tty->count == 1) && (state->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. state->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("rs_close: bad serial port count; tty->count is 1, " - "state->count is %d\n", state->count); - state->count = 1; - } - if (--state->count < 0) { - printk("rs_close: bad serial port count for ttys%d: %d\n", - info->line, state->count); - state->count = 0; - } - if (state->count) { - DBG_CNT("before DEC-2"); - local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->read_status_mask &= ~UART_LSR_DR; - if (info->flags & ASYNC_INITIALIZED) { - /* disable receive interrupts */ - custom.intena = IF_RBF; - mb(); - /* clear any pending receive interrupt */ - custom.intreq = IF_RBF; - mb(); - - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - rs_wait_until_sent(tty, info->timeout); - } - shutdown(info); - rs_flush_buffer(tty); - - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); -} - -/* - * rs_wait_until_sent() --- wait until the transmitter is empty - */ -static void rs_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct async_struct * info = tty->driver_data; - unsigned long orig_jiffies, char_time; - int tty_was_locked = tty_locked(); - int lsr; - - if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) - return; - - if (info->xmit_fifo_size == 0) - return; /* Just in case.... */ - - orig_jiffies = jiffies; - - /* - * tty_wait_until_sent is called from lots of places, - * with or without the BTM. - */ - if (!tty_was_locked) - tty_lock(); - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - HZ/50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2*info->timeout) - timeout = 2*info->timeout; -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); - printk("jiff=%lu...", jiffies); -#endif - while(!((lsr = custom.serdatr) & SDR_TSRE)) { -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("serdatr = %d (jiff=%lu)...", lsr, jiffies); -#endif - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - __set_current_state(TASK_RUNNING); - if (!tty_was_locked) - tty_unlock(); -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -#endif -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void rs_hangup(struct tty_struct *tty) -{ - struct async_struct * info = tty->driver_data; - struct serial_state *state = info->state; - - if (serial_paranoia_check(info, tty->name, "rs_hangup")) - return; - - state = info->state; - - rs_flush_buffer(tty); - shutdown(info); - info->event = 0; - state->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct async_struct *info) -{ -#ifdef DECLARE_WAITQUEUE - DECLARE_WAITQUEUE(wait, current); -#else - struct wait_queue wait = { current, NULL }; -#endif - struct serial_state *state = info->state; - int retval; - int do_clocal = 0, extra_count = 0; - unsigned long flags; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, state->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttys%d, count = %d\n", - state->line, state->count); -#endif - local_irq_save(flags); - if (!tty_hung_up_p(filp)) { - extra_count = 1; - state->count--; - } - local_irq_restore(flags); - info->blocked_open++; - while (1) { - local_irq_save(flags); - if (tty->termios->c_cflag & CBAUD) - rtsdtr_ctrl(SER_DTR|SER_RTS); - local_irq_restore(flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (!(ciab.pra & SER_DCD)) )) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif - tty_unlock(); - schedule(); - tty_lock(); - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (extra_count) - state->count++; - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static int get_async_struct(int line, struct async_struct **ret_info) -{ - struct async_struct *info; - struct serial_state *sstate; - - sstate = rs_table + line; - sstate->count++; - if (sstate->info) { - *ret_info = sstate->info; - return 0; - } - info = kzalloc(sizeof(struct async_struct), GFP_KERNEL); - if (!info) { - sstate->count--; - return -ENOMEM; - } -#ifdef DECLARE_WAITQUEUE - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->delta_msr_wait); -#endif - info->magic = SERIAL_MAGIC; - info->port = sstate->port; - info->flags = sstate->flags; - info->xmit_fifo_size = sstate->xmit_fifo_size; - info->line = line; - tasklet_init(&info->tlet, do_softint, (unsigned long)info); - info->state = sstate; - if (sstate->info) { - kfree(info); - *ret_info = sstate->info; - return 0; - } - *ret_info = sstate->info = info; - return 0; -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int rs_open(struct tty_struct *tty, struct file * filp) -{ - struct async_struct *info; - int retval, line; - - line = tty->index; - if ((line < 0) || (line >= NR_PORTS)) { - return -ENODEV; - } - retval = get_async_struct(line, &info); - if (retval) { - return retval; - } - tty->driver_data = info; - info->tty = tty; - if (serial_paranoia_check(info, tty->name, "rs_open")) - return -ENODEV; - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s, count = %d\n", tty->name, info->state->count); -#endif - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - /* - * If the port is the middle of closing, bail out now - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); -#else - return -EAGAIN; -#endif - } - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) { - return retval; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s successful...", tty->name); -#endif - return 0; -} - -/* - * /proc fs routines.... - */ - -static inline void line_info(struct seq_file *m, struct serial_state *state) -{ - struct async_struct *info = state->info, scr_info; - char stat_buf[30], control, status; - unsigned long flags; - - seq_printf(m, "%d: uart:amiga_builtin",state->line); - - /* - * Figure out the current RS-232 lines - */ - if (!info) { - info = &scr_info; /* This is just for serial_{in,out} */ - - info->magic = SERIAL_MAGIC; - info->flags = state->flags; - info->quot = 0; - info->tty = NULL; - } - local_irq_save(flags); - status = ciab.pra; - control = info ? info->MCR : status; - local_irq_restore(flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if(!(control & SER_RTS)) - strcat(stat_buf, "|RTS"); - if(!(status & SER_CTS)) - strcat(stat_buf, "|CTS"); - if(!(control & SER_DTR)) - strcat(stat_buf, "|DTR"); - if(!(status & SER_DSR)) - strcat(stat_buf, "|DSR"); - if(!(status & SER_DCD)) - strcat(stat_buf, "|CD"); - - if (info->quot) { - seq_printf(m, " baud:%d", state->baud_base / info->quot); - } - - seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx); - - if (state->icount.frame) - seq_printf(m, " fe:%d", state->icount.frame); - - if (state->icount.parity) - seq_printf(m, " pe:%d", state->icount.parity); - - if (state->icount.brk) - seq_printf(m, " brk:%d", state->icount.brk); - - if (state->icount.overrun) - seq_printf(m, " oe:%d", state->icount.overrun); - - /* - * Last thing is the RS-232 status lines - */ - seq_printf(m, " %s\n", stat_buf+1); -} - -static int rs_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); - line_info(m, &rs_table[0]); - return 0; -} - -static int rs_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, rs_proc_show, NULL); -} - -static const struct file_operations rs_proc_fops = { - .owner = THIS_MODULE, - .open = rs_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * --------------------------------------------------------------------- - * rs_init() and friends - * - * rs_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -/* - * This routine prints out the appropriate serial driver version - * number, and identifies which options were configured into this - * driver. - */ -static void show_serial_version(void) -{ - printk(KERN_INFO "%s version %s\n", serial_name, serial_version); -} - - -static const struct tty_operations serial_ops = { - .open = rs_open, - .close = rs_close, - .write = rs_write, - .put_char = rs_put_char, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = rs_hangup, - .break_ctl = rs_break, - .send_xchar = rs_send_xchar, - .wait_until_sent = rs_wait_until_sent, - .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset, - .get_icount = rs_get_icount, - .proc_fops = &rs_proc_fops, -}; - -/* - * The serial driver boot-time initialization code! - */ -static int __init amiga_serial_probe(struct platform_device *pdev) -{ - unsigned long flags; - struct serial_state * state; - int error; - - serial_driver = alloc_tty_driver(1); - if (!serial_driver) - return -ENOMEM; - - IRQ_ports = NULL; - - show_serial_version(); - - /* Initialize the tty_driver structure */ - - serial_driver->owner = THIS_MODULE; - serial_driver->driver_name = "amiserial"; - serial_driver->name = "ttyS"; - serial_driver->major = TTY_MAJOR; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &serial_ops); - - error = tty_register_driver(serial_driver); - if (error) - goto fail_put_tty_driver; - - state = rs_table; - state->magic = SSTATE_MAGIC; - state->port = (int)&custom.serdatr; /* Just to give it a value */ - state->line = 0; - state->custom_divisor = 0; - state->close_delay = 5*HZ/10; - state->closing_wait = 30*HZ; - state->icount.cts = state->icount.dsr = - state->icount.rng = state->icount.dcd = 0; - state->icount.rx = state->icount.tx = 0; - state->icount.frame = state->icount.parity = 0; - state->icount.overrun = state->icount.brk = 0; - - printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n", - state->line); - - /* Hardware set up */ - - state->baud_base = amiga_colorclock; - state->xmit_fifo_size = 1; - - /* set ISRs, and then disable the rx interrupts */ - error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state); - if (error) - goto fail_unregister; - - error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, - "serial RX", state); - if (error) - goto fail_free_irq; - - local_irq_save(flags); - - /* turn off Rx and Tx interrupts */ - custom.intena = IF_RBF | IF_TBE; - mb(); - - /* clear any pending interrupt */ - custom.intreq = IF_RBF | IF_TBE; - mb(); - - local_irq_restore(flags); - - /* - * set the appropriate directions for the modem control flags, - * and clear RTS and DTR - */ - ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */ - ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */ - - platform_set_drvdata(pdev, state); - - return 0; - -fail_free_irq: - free_irq(IRQ_AMIGA_TBE, state); -fail_unregister: - tty_unregister_driver(serial_driver); -fail_put_tty_driver: - put_tty_driver(serial_driver); - return error; -} - -static int __exit amiga_serial_remove(struct platform_device *pdev) -{ - int error; - struct serial_state *state = platform_get_drvdata(pdev); - struct async_struct *info = state->info; - - /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ - tasklet_kill(&info->tlet); - if ((error = tty_unregister_driver(serial_driver))) - printk("SERIAL: failed to unregister serial driver (%d)\n", - error); - put_tty_driver(serial_driver); - - rs_table[0].info = NULL; - kfree(info); - - free_irq(IRQ_AMIGA_TBE, rs_table); - free_irq(IRQ_AMIGA_RBF, rs_table); - - platform_set_drvdata(pdev, NULL); - - return error; -} - -static struct platform_driver amiga_serial_driver = { - .remove = __exit_p(amiga_serial_remove), - .driver = { - .name = "amiga-serial", - .owner = THIS_MODULE, - }, -}; - -static int __init amiga_serial_init(void) -{ - return platform_driver_probe(&amiga_serial_driver, amiga_serial_probe); -} - -module_init(amiga_serial_init); - -static void __exit amiga_serial_exit(void) -{ - platform_driver_unregister(&amiga_serial_driver); -} - -module_exit(amiga_serial_exit); - - -#if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE) - -/* - * ------------------------------------------------------------ - * Serial console driver - * ------------------------------------------------------------ - */ - -static void amiga_serial_putc(char c) -{ - custom.serdat = (unsigned char)c | 0x100; - while (!(custom.serdatr & 0x2000)) - barrier(); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console must be locked when we get here. - */ -static void serial_console_write(struct console *co, const char *s, - unsigned count) -{ - unsigned short intena = custom.intenar; - - custom.intena = IF_TBE; - - while (count--) { - if (*s == '\n') - amiga_serial_putc('\r'); - amiga_serial_putc(*s++); - } - - custom.intena = IF_SETCLR | (intena & IF_TBE); -} - -static struct tty_driver *serial_console_device(struct console *c, int *index) -{ - *index = 0; - return serial_driver; -} - -static struct console sercons = { - .name = "ttyS", - .write = serial_console_write, - .device = serial_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * Register console. - */ -static int __init amiserial_console_init(void) -{ - register_console(&sercons); - return 0; -} -console_initcall(amiserial_console_init); - -#endif /* CONFIG_SERIAL_CONSOLE && !MODULE */ - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:amiga-serial"); diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c deleted file mode 100644 index 16402445f2b2..000000000000 --- a/drivers/char/bfin_jtag_comm.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * TTY over Blackfin JTAG Communication - * - * Copyright 2008-2009 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -#define DRV_NAME "bfin-jtag-comm" -#define DEV_NAME "ttyBFJC" -#define pr_fmt(fmt) DRV_NAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); }) - -/* See the Debug/Emulation chapter in the HRM */ -#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ -#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ -#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ -#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ - -static inline uint32_t bfin_write_emudat(uint32_t emudat) -{ - __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); - return emudat; -} - -static inline uint32_t bfin_read_emudat(void) -{ - uint32_t emudat; - __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); - return emudat; -} - -static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d) -{ - return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24)); -} - -#define CIRC_SIZE 2048 /* see comment in tty_io.c:do_tty_write() */ -#define CIRC_MASK (CIRC_SIZE - 1) -#define circ_empty(circ) ((circ)->head == (circ)->tail) -#define circ_free(circ) CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE) -#define circ_cnt(circ) CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE) -#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK]) - -static struct tty_driver *bfin_jc_driver; -static struct task_struct *bfin_jc_kthread; -static struct tty_struct * volatile bfin_jc_tty; -static unsigned long bfin_jc_count; -static DEFINE_MUTEX(bfin_jc_tty_mutex); -static volatile struct circ_buf bfin_jc_write_buf; - -static int -bfin_jc_emudat_manager(void *arg) -{ - uint32_t inbound_len = 0, outbound_len = 0; - - while (!kthread_should_stop()) { - /* no one left to give data to, so sleep */ - if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) { - pr_debug("waiting for readers\n"); - __set_current_state(TASK_UNINTERRUPTIBLE); - schedule(); - __set_current_state(TASK_RUNNING); - } - - /* no data available, so just chill */ - if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) { - pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n", - inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head); - if (inbound_len) - schedule(); - else - schedule_timeout_interruptible(HZ); - continue; - } - - /* if incoming data is ready, eat it */ - if (bfin_read_DBGSTAT() & EMUDIF) { - struct tty_struct *tty; - mutex_lock(&bfin_jc_tty_mutex); - tty = (struct tty_struct *)bfin_jc_tty; - if (tty != NULL) { - uint32_t emudat = bfin_read_emudat(); - if (inbound_len == 0) { - pr_debug("incoming length: 0x%08x\n", emudat); - inbound_len = emudat; - } else { - size_t num_chars = (4 <= inbound_len ? 4 : inbound_len); - pr_debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars); - inbound_len -= num_chars; - tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars); - tty_flip_buffer_push(tty); - } - } - mutex_unlock(&bfin_jc_tty_mutex); - } - - /* if outgoing data is ready, post it */ - if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) { - if (outbound_len == 0) { - outbound_len = circ_cnt(&bfin_jc_write_buf); - bfin_write_emudat(outbound_len); - pr_debug("outgoing length: 0x%08x\n", outbound_len); - } else { - struct tty_struct *tty; - int tail = bfin_jc_write_buf.tail; - size_t ate = (4 <= outbound_len ? 4 : outbound_len); - uint32_t emudat = - bfin_write_emudat_chars( - circ_byte(&bfin_jc_write_buf, tail + 0), - circ_byte(&bfin_jc_write_buf, tail + 1), - circ_byte(&bfin_jc_write_buf, tail + 2), - circ_byte(&bfin_jc_write_buf, tail + 3) - ); - bfin_jc_write_buf.tail += ate; - outbound_len -= ate; - mutex_lock(&bfin_jc_tty_mutex); - tty = (struct tty_struct *)bfin_jc_tty; - if (tty) - tty_wakeup(tty); - mutex_unlock(&bfin_jc_tty_mutex); - pr_debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate); - } - } - } - - __set_current_state(TASK_RUNNING); - return 0; -} - -static int -bfin_jc_open(struct tty_struct *tty, struct file *filp) -{ - mutex_lock(&bfin_jc_tty_mutex); - pr_debug("open %lu\n", bfin_jc_count); - ++bfin_jc_count; - bfin_jc_tty = tty; - wake_up_process(bfin_jc_kthread); - mutex_unlock(&bfin_jc_tty_mutex); - return 0; -} - -static void -bfin_jc_close(struct tty_struct *tty, struct file *filp) -{ - mutex_lock(&bfin_jc_tty_mutex); - pr_debug("close %lu\n", bfin_jc_count); - if (--bfin_jc_count == 0) - bfin_jc_tty = NULL; - wake_up_process(bfin_jc_kthread); - mutex_unlock(&bfin_jc_tty_mutex); -} - -/* XXX: we dont handle the put_char() case where we must handle count = 1 */ -static int -bfin_jc_circ_write(const unsigned char *buf, int count) -{ - int i; - count = min(count, circ_free(&bfin_jc_write_buf)); - pr_debug("going to write chunk of %i bytes\n", count); - for (i = 0; i < count; ++i) - circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i]; - bfin_jc_write_buf.head += i; - return i; -} - -#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE -# define console_lock() -# define console_unlock() -#endif -static int -bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - int i; - console_lock(); - i = bfin_jc_circ_write(buf, count); - console_unlock(); - wake_up_process(bfin_jc_kthread); - return i; -} - -static void -bfin_jc_flush_chars(struct tty_struct *tty) -{ - wake_up_process(bfin_jc_kthread); -} - -static int -bfin_jc_write_room(struct tty_struct *tty) -{ - return circ_free(&bfin_jc_write_buf); -} - -static int -bfin_jc_chars_in_buffer(struct tty_struct *tty) -{ - return circ_cnt(&bfin_jc_write_buf); -} - -static void -bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout) -{ - unsigned long expire = jiffies + timeout; - while (!circ_empty(&bfin_jc_write_buf)) { - if (signal_pending(current)) - break; - if (time_after(jiffies, expire)) - break; - } -} - -static const struct tty_operations bfin_jc_ops = { - .open = bfin_jc_open, - .close = bfin_jc_close, - .write = bfin_jc_write, - /*.put_char = bfin_jc_put_char,*/ - .flush_chars = bfin_jc_flush_chars, - .write_room = bfin_jc_write_room, - .chars_in_buffer = bfin_jc_chars_in_buffer, - .wait_until_sent = bfin_jc_wait_until_sent, -}; - -static int __init bfin_jc_init(void) -{ - int ret; - - bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME); - if (IS_ERR(bfin_jc_kthread)) - return PTR_ERR(bfin_jc_kthread); - - ret = -ENOMEM; - - bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0; - bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL); - if (!bfin_jc_write_buf.buf) - goto err; - - bfin_jc_driver = alloc_tty_driver(1); - if (!bfin_jc_driver) - goto err; - - bfin_jc_driver->owner = THIS_MODULE; - bfin_jc_driver->driver_name = DRV_NAME; - bfin_jc_driver->name = DEV_NAME; - bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL; - bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL; - bfin_jc_driver->init_termios = tty_std_termios; - tty_set_operations(bfin_jc_driver, &bfin_jc_ops); - - ret = tty_register_driver(bfin_jc_driver); - if (ret) - goto err; - - pr_init(KERN_INFO DRV_NAME ": initialized\n"); - - return 0; - - err: - put_tty_driver(bfin_jc_driver); - kfree(bfin_jc_write_buf.buf); - kthread_stop(bfin_jc_kthread); - return ret; -} -module_init(bfin_jc_init); - -static void __exit bfin_jc_exit(void) -{ - kthread_stop(bfin_jc_kthread); - kfree(bfin_jc_write_buf.buf); - tty_unregister_driver(bfin_jc_driver); - put_tty_driver(bfin_jc_driver); -} -module_exit(bfin_jc_exit); - -#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -static void -bfin_jc_straight_buffer_write(const char *buf, unsigned count) -{ - unsigned ate = 0; - while (bfin_read_DBGSTAT() & EMUDOF) - continue; - bfin_write_emudat(count); - while (ate < count) { - while (bfin_read_DBGSTAT() & EMUDOF) - continue; - bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]); - ate += 4; - } -} -#endif - -#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE -static void -bfin_jc_console_write(struct console *co, const char *buf, unsigned count) -{ - if (bfin_jc_kthread == NULL) - bfin_jc_straight_buffer_write(buf, count); - else - bfin_jc_circ_write(buf, count); -} - -static struct tty_driver * -bfin_jc_console_device(struct console *co, int *index) -{ - *index = co->index; - return bfin_jc_driver; -} - -static struct console bfin_jc_console = { - .name = DEV_NAME, - .write = bfin_jc_console_write, - .device = bfin_jc_console_device, - .flags = CON_ANYTIME | CON_PRINTBUFFER, - .index = -1, -}; - -static int __init bfin_jc_console_init(void) -{ - register_console(&bfin_jc_console); - return 0; -} -console_initcall(bfin_jc_console_init); -#endif - -#ifdef CONFIG_EARLY_PRINTK -static void __init -bfin_jc_early_write(struct console *co, const char *buf, unsigned int count) -{ - bfin_jc_straight_buffer_write(buf, count); -} - -static struct __initdata console bfin_jc_early_console = { - .name = "early_BFJC", - .write = bfin_jc_early_write, - .flags = CON_ANYTIME | CON_PRINTBUFFER, - .index = -1, -}; - -struct console * __init -bfin_jc_early_init(unsigned int port, unsigned int cflag) -{ - return &bfin_jc_early_console; -} -#endif - -MODULE_AUTHOR("Mike Frysinger "); -MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication"); -MODULE_LICENSE("GPL"); diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c deleted file mode 100644 index c99728f0cd9f..000000000000 --- a/drivers/char/cyclades.c +++ /dev/null @@ -1,4200 +0,0 @@ -#undef BLOCKMOVE -#define Z_WAKE -#undef Z_EXT_CHARS_IN_BUFFER - -/* - * linux/drivers/char/cyclades.c - * - * This file contains the driver for the Cyclades async multiport - * serial boards. - * - * Initially written by Randolph Bentson . - * Modified and maintained by Marcio Saito . - * - * Copyright (C) 2007-2009 Jiri Slaby - * - * Much of the design and some of the code came from serial.c - * which was copyright (C) 1991, 1992 Linus Torvalds. It was - * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, - * and then fixed as suggested by Michael K. Johnson 12/12/92. - * Converted to pci probing and cleaned up by Jiri Slaby. - * - */ - -#define CY_VERSION "2.6" - -/* If you need to install more boards than NR_CARDS, change the constant - in the definition below. No other change is necessary to support up to - eight boards. Beyond that you'll have to extend cy_isa_addresses. */ - -#define NR_CARDS 4 - -/* - If the total number of ports is larger than NR_PORTS, change this - constant in the definition below. No other change is necessary to - support more boards/ports. */ - -#define NR_PORTS 256 - -#define ZO_V1 0 -#define ZO_V2 1 -#define ZE_V1 2 - -#define SERIAL_PARANOIA_CHECK -#undef CY_DEBUG_OPEN -#undef CY_DEBUG_THROTTLE -#undef CY_DEBUG_OTHER -#undef CY_DEBUG_IO -#undef CY_DEBUG_COUNT -#undef CY_DEBUG_DTR -#undef CY_DEBUG_WAIT_UNTIL_SENT -#undef CY_DEBUG_INTERRUPTS -#undef CY_16Y_HACK -#undef CY_ENABLE_MONITORING -#undef CY_PCI_DEBUG - -/* - * Include section - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include -#include -#include - -static void cy_send_xchar(struct tty_struct *tty, char ch); - -#ifndef SERIAL_XMIT_SIZE -#define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) -#endif - -#define STD_COM_FLAGS (0) - -/* firmware stuff */ -#define ZL_MAX_BLOCKS 16 -#define DRIVER_VERSION 0x02010203 -#define RAM_SIZE 0x80000 - -enum zblock_type { - ZBLOCK_PRG = 0, - ZBLOCK_FPGA = 1 -}; - -struct zfile_header { - char name[64]; - char date[32]; - char aux[32]; - u32 n_config; - u32 config_offset; - u32 n_blocks; - u32 block_offset; - u32 reserved[9]; -} __attribute__ ((packed)); - -struct zfile_config { - char name[64]; - u32 mailbox; - u32 function; - u32 n_blocks; - u32 block_list[ZL_MAX_BLOCKS]; -} __attribute__ ((packed)); - -struct zfile_block { - u32 type; - u32 file_offset; - u32 ram_offset; - u32 size; -} __attribute__ ((packed)); - -static struct tty_driver *cy_serial_driver; - -#ifdef CONFIG_ISA -/* This is the address lookup table. The driver will probe for - Cyclom-Y/ISA boards at all addresses in here. If you want the - driver to probe addresses at a different address, add it to - this table. If the driver is probing some other board and - causing problems, remove the offending address from this table. -*/ - -static unsigned int cy_isa_addresses[] = { - 0xD0000, - 0xD2000, - 0xD4000, - 0xD6000, - 0xD8000, - 0xDA000, - 0xDC000, - 0xDE000, - 0, 0, 0, 0, 0, 0, 0, 0 -}; - -#define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) - -static long maddr[NR_CARDS]; -static int irq[NR_CARDS]; - -module_param_array(maddr, long, NULL, 0); -module_param_array(irq, int, NULL, 0); - -#endif /* CONFIG_ISA */ - -/* This is the per-card data structure containing address, irq, number of - channels, etc. This driver supports a maximum of NR_CARDS cards. -*/ -static struct cyclades_card cy_card[NR_CARDS]; - -static int cy_next_channel; /* next minor available */ - -/* - * This is used to look up the divisor speeds and the timeouts - * We're normally limited to 15 distinct baud rates. The extra - * are accessed via settings in info->port.flags. - * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, - * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, - * HI VHI - * 20 - */ -static const int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, - 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, - 230400, 0 -}; - -static const char baud_co_25[] = { /* 25 MHz clock option table */ - /* value => 00 01 02 03 04 */ - /* divide by 8 32 128 512 2048 */ - 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, - 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static const char baud_bpr_25[] = { /* 25 MHz baud rate period table */ - 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, - 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 -}; - -static const char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */ - /* value => 00 01 02 03 04 */ - /* divide by 8 32 128 512 2048 */ - 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, - 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00 -}; - -static const char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */ - 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62, - 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32, - 0x21 -}; - -static const char baud_cor3[] = { /* receive threshold */ - 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, - 0x07 -}; - -/* - * The Cyclades driver implements HW flow control as any serial driver. - * The cyclades_port structure member rflow and the vector rflow_thr - * allows us to take advantage of a special feature in the CD1400 to avoid - * data loss even when the system interrupt latency is too high. These flags - * are to be used only with very special applications. Setting these flags - * requires the use of a special cable (DTR and RTS reversed). In the new - * CD1400-based boards (rev. 6.00 or later), there is no need for special - * cables. - */ - -static const char rflow_thr[] = { /* rflow threshold */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x0a -}; - -/* The Cyclom-Ye has placed the sequential chips in non-sequential - * address order. This look-up table overcomes that problem. - */ -static const unsigned int cy_chip_offset[] = { 0x0000, - 0x0400, - 0x0800, - 0x0C00, - 0x0200, - 0x0600, - 0x0A00, - 0x0E00 -}; - -/* PCI related definitions */ - -#ifdef CONFIG_PCI -static const struct pci_device_id cy_pci_dev_id[] = { - /* PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, - /* PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, - /* 4Y PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, - /* 4Y PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, - /* 8Y PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, - /* 8Y PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, - /* Z PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, - /* Z PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, - { } /* end of table */ -}; -MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); -#endif - -static void cy_start(struct tty_struct *); -static void cy_set_line_char(struct cyclades_port *, struct tty_struct *); -static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); -#ifdef CONFIG_ISA -static unsigned detect_isa_irq(void __iomem *); -#endif /* CONFIG_ISA */ - -#ifndef CONFIG_CYZ_INTR -static void cyz_poll(unsigned long); - -/* The Cyclades-Z polling cycle is defined by this variable */ -static long cyz_polling_cycle = CZ_DEF_POLL; - -static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0); - -#else /* CONFIG_CYZ_INTR */ -static void cyz_rx_restart(unsigned long); -static struct timer_list cyz_rx_full_timer[NR_PORTS]; -#endif /* CONFIG_CYZ_INTR */ - -static inline void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val) -{ - struct cyclades_card *card = port->card; - - cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val); -} - -static inline u8 cyy_readb(struct cyclades_port *port, u32 reg) -{ - struct cyclades_card *card = port->card; - - return readb(port->u.cyy.base_addr + (reg << card->bus_index)); -} - -static inline bool cy_is_Z(struct cyclades_card *card) -{ - return card->num_chips == (unsigned int)-1; -} - -static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr) -{ - return readl(&ctl_addr->init_ctrl) & (1 << 17); -} - -static inline bool cyz_fpga_loaded(struct cyclades_card *card) -{ - return __cyz_fpga_loaded(card->ctl_addr.p9060); -} - -static inline bool cyz_is_loaded(struct cyclades_card *card) -{ - struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS; - - return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) && - readl(&fw_id->signature) == ZFIRM_ID; -} - -static inline int serial_paranoia_check(struct cyclades_port *info, - const char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - if (!info) { - printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) " - "in %s\n", name, routine); - return 1; - } - - if (info->magic != CYCLADES_MAGIC) { - printk(KERN_WARNING "cyc Warning: bad magic number for serial " - "struct (%s) in %s\n", name, routine); - return 1; - } -#endif - return 0; -} - -/***********************************************************/ -/********* Start of block of Cyclom-Y specific code ********/ - -/* This routine waits up to 1000 micro-seconds for the previous - command to the Cirrus chip to complete and then issues the - new command. An error is returned if the previous command - didn't finish within the time limit. - - This function is only called from inside spinlock-protected code. - */ -static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index) -{ - void __iomem *ccr = base_addr + (CyCCR << index); - unsigned int i; - - /* Check to see that the previous command has completed */ - for (i = 0; i < 100; i++) { - if (readb(ccr) == 0) - break; - udelay(10L); - } - /* if the CCR never cleared, the previous command - didn't finish within the "reasonable time" */ - if (i == 100) - return -1; - - /* Issue the new command */ - cy_writeb(ccr, cmd); - - return 0; -} - -static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd) -{ - return __cyy_issue_cmd(port->u.cyy.base_addr, cmd, - port->card->bus_index); -} - -#ifdef CONFIG_ISA -/* ISA interrupt detection code */ -static unsigned detect_isa_irq(void __iomem *address) -{ - int irq; - unsigned long irqs, flags; - int save_xir, save_car; - int index = 0; /* IRQ probing is only for ISA */ - - /* forget possible initially masked and pending IRQ */ - irq = probe_irq_off(probe_irq_on()); - - /* Clear interrupts on the board first */ - cy_writeb(address + (Cy_ClrIntr << index), 0); - /* Cy_ClrIntr is 0x1800 */ - - irqs = probe_irq_on(); - /* Wait ... */ - msleep(5); - - /* Enable the Tx interrupts on the CD1400 */ - local_irq_save(flags); - cy_writeb(address + (CyCAR << index), 0); - __cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index); - - cy_writeb(address + (CyCAR << index), 0); - cy_writeb(address + (CySRER << index), - readb(address + (CySRER << index)) | CyTxRdy); - local_irq_restore(flags); - - /* Wait ... */ - msleep(5); - - /* Check which interrupt is in use */ - irq = probe_irq_off(irqs); - - /* Clean up */ - save_xir = (u_char) readb(address + (CyTIR << index)); - save_car = readb(address + (CyCAR << index)); - cy_writeb(address + (CyCAR << index), (save_xir & 0x3)); - cy_writeb(address + (CySRER << index), - readb(address + (CySRER << index)) & ~CyTxRdy); - cy_writeb(address + (CyTIR << index), (save_xir & 0x3f)); - cy_writeb(address + (CyCAR << index), (save_car)); - cy_writeb(address + (Cy_ClrIntr << index), 0); - /* Cy_ClrIntr is 0x1800 */ - - return (irq > 0) ? irq : 0; -} -#endif /* CONFIG_ISA */ - -static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, - void __iomem *base_addr) -{ - struct cyclades_port *info; - struct tty_struct *tty; - int len, index = cinfo->bus_index; - u8 ivr, save_xir, channel, save_car, data, char_count; - -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip); -#endif - /* determine the channel & change to that context */ - save_xir = readb(base_addr + (CyRIR << index)); - channel = save_xir & CyIRChannel; - info = &cinfo->ports[channel + chip * 4]; - save_car = cyy_readb(info, CyCAR); - cyy_writeb(info, CyCAR, save_xir); - ivr = cyy_readb(info, CyRIVR) & CyIVRMask; - - tty = tty_port_tty_get(&info->port); - /* if there is nowhere to put the data, discard it */ - if (tty == NULL) { - if (ivr == CyIVRRxEx) { /* exception */ - data = cyy_readb(info, CyRDSR); - } else { /* normal character reception */ - char_count = cyy_readb(info, CyRDCR); - while (char_count--) - data = cyy_readb(info, CyRDSR); - } - goto end; - } - /* there is an open port for this data */ - if (ivr == CyIVRRxEx) { /* exception */ - data = cyy_readb(info, CyRDSR); - - /* For statistics only */ - if (data & CyBREAK) - info->icount.brk++; - else if (data & CyFRAME) - info->icount.frame++; - else if (data & CyPARITY) - info->icount.parity++; - else if (data & CyOVERRUN) - info->icount.overrun++; - - if (data & info->ignore_status_mask) { - info->icount.rx++; - tty_kref_put(tty); - return; - } - if (tty_buffer_request_room(tty, 1)) { - if (data & info->read_status_mask) { - if (data & CyBREAK) { - tty_insert_flip_char(tty, - cyy_readb(info, CyRDSR), - TTY_BREAK); - info->icount.rx++; - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } else if (data & CyFRAME) { - tty_insert_flip_char(tty, - cyy_readb(info, CyRDSR), - TTY_FRAME); - info->icount.rx++; - info->idle_stats.frame_errs++; - } else if (data & CyPARITY) { - /* Pieces of seven... */ - tty_insert_flip_char(tty, - cyy_readb(info, CyRDSR), - TTY_PARITY); - info->icount.rx++; - info->idle_stats.parity_errs++; - } else if (data & CyOVERRUN) { - tty_insert_flip_char(tty, 0, - TTY_OVERRUN); - info->icount.rx++; - /* If the flip buffer itself is - overflowing, we still lose - the next incoming character. - */ - tty_insert_flip_char(tty, - cyy_readb(info, CyRDSR), - TTY_FRAME); - info->icount.rx++; - info->idle_stats.overruns++; - /* These two conditions may imply */ - /* a normal read should be done. */ - /* } else if(data & CyTIMEOUT) { */ - /* } else if(data & CySPECHAR) { */ - } else { - tty_insert_flip_char(tty, 0, - TTY_NORMAL); - info->icount.rx++; - } - } else { - tty_insert_flip_char(tty, 0, TTY_NORMAL); - info->icount.rx++; - } - } else { - /* there was a software buffer overrun and nothing - * could be done about it!!! */ - info->icount.buf_overrun++; - info->idle_stats.overruns++; - } - } else { /* normal character reception */ - /* load # chars available from the chip */ - char_count = cyy_readb(info, CyRDCR); - -#ifdef CY_ENABLE_MONITORING - ++info->mon.int_count; - info->mon.char_count += char_count; - if (char_count > info->mon.char_max) - info->mon.char_max = char_count; - info->mon.char_last = char_count; -#endif - len = tty_buffer_request_room(tty, char_count); - while (len--) { - data = cyy_readb(info, CyRDSR); - tty_insert_flip_char(tty, data, TTY_NORMAL); - info->idle_stats.recv_bytes++; - info->icount.rx++; -#ifdef CY_16Y_HACK - udelay(10L); -#endif - } - info->idle_stats.recv_idle = jiffies; - } - tty_schedule_flip(tty); - tty_kref_put(tty); -end: - /* end of service */ - cyy_writeb(info, CyRIR, save_xir & 0x3f); - cyy_writeb(info, CyCAR, save_car); -} - -static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, - void __iomem *base_addr) -{ - struct cyclades_port *info; - struct tty_struct *tty; - int char_count, index = cinfo->bus_index; - u8 save_xir, channel, save_car, outch; - - /* Since we only get here when the transmit buffer - is empty, we know we can always stuff a dozen - characters. */ -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip); -#endif - - /* determine the channel & change to that context */ - save_xir = readb(base_addr + (CyTIR << index)); - channel = save_xir & CyIRChannel; - save_car = readb(base_addr + (CyCAR << index)); - cy_writeb(base_addr + (CyCAR << index), save_xir); - - info = &cinfo->ports[channel + chip * 4]; - tty = tty_port_tty_get(&info->port); - if (tty == NULL) { - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy); - goto end; - } - - /* load the on-chip space for outbound data */ - char_count = info->xmit_fifo_size; - - if (info->x_char) { /* send special char */ - outch = info->x_char; - cyy_writeb(info, CyTDR, outch); - char_count--; - info->icount.tx++; - info->x_char = 0; - } - - if (info->breakon || info->breakoff) { - if (info->breakon) { - cyy_writeb(info, CyTDR, 0); - cyy_writeb(info, CyTDR, 0x81); - info->breakon = 0; - char_count -= 2; - } - if (info->breakoff) { - cyy_writeb(info, CyTDR, 0); - cyy_writeb(info, CyTDR, 0x83); - info->breakoff = 0; - char_count -= 2; - } - } - - while (char_count-- > 0) { - if (!info->xmit_cnt) { - if (cyy_readb(info, CySRER) & CyTxMpty) { - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) & ~CyTxMpty); - } else { - cyy_writeb(info, CySRER, CyTxMpty | - (cyy_readb(info, CySRER) & ~CyTxRdy)); - } - goto done; - } - if (info->port.xmit_buf == NULL) { - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) & ~CyTxRdy); - goto done; - } - if (tty->stopped || tty->hw_stopped) { - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) & ~CyTxRdy); - goto done; - } - /* Because the Embedded Transmit Commands have been enabled, - * we must check to see if the escape character, NULL, is being - * sent. If it is, we must ensure that there is room for it to - * be doubled in the output stream. Therefore we no longer - * advance the pointer when the character is fetched, but - * rather wait until after the check for a NULL output - * character. This is necessary because there may not be room - * for the two chars needed to send a NULL.) - */ - outch = info->port.xmit_buf[info->xmit_tail]; - if (outch) { - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) & - (SERIAL_XMIT_SIZE - 1); - cyy_writeb(info, CyTDR, outch); - info->icount.tx++; - } else { - if (char_count > 1) { - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) & - (SERIAL_XMIT_SIZE - 1); - cyy_writeb(info, CyTDR, outch); - cyy_writeb(info, CyTDR, 0); - info->icount.tx++; - char_count--; - } - } - } - -done: - tty_wakeup(tty); - tty_kref_put(tty); -end: - /* end of service */ - cyy_writeb(info, CyTIR, save_xir & 0x3f); - cyy_writeb(info, CyCAR, save_car); -} - -static void cyy_chip_modem(struct cyclades_card *cinfo, int chip, - void __iomem *base_addr) -{ - struct cyclades_port *info; - struct tty_struct *tty; - int index = cinfo->bus_index; - u8 save_xir, channel, save_car, mdm_change, mdm_status; - - /* determine the channel & change to that context */ - save_xir = readb(base_addr + (CyMIR << index)); - channel = save_xir & CyIRChannel; - info = &cinfo->ports[channel + chip * 4]; - save_car = cyy_readb(info, CyCAR); - cyy_writeb(info, CyCAR, save_xir); - - mdm_change = cyy_readb(info, CyMISR); - mdm_status = cyy_readb(info, CyMSVR1); - - tty = tty_port_tty_get(&info->port); - if (!tty) - goto end; - - if (mdm_change & CyANY_DELTA) { - /* For statistics only */ - if (mdm_change & CyDCD) - info->icount.dcd++; - if (mdm_change & CyCTS) - info->icount.cts++; - if (mdm_change & CyDSR) - info->icount.dsr++; - if (mdm_change & CyRI) - info->icount.rng++; - - wake_up_interruptible(&info->port.delta_msr_wait); - } - - if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) { - if (mdm_status & CyDCD) - wake_up_interruptible(&info->port.open_wait); - else - tty_hangup(tty); - } - if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) { - if (tty->hw_stopped) { - if (mdm_status & CyCTS) { - /* cy_start isn't used - because... !!! */ - tty->hw_stopped = 0; - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) | CyTxRdy); - tty_wakeup(tty); - } - } else { - if (!(mdm_status & CyCTS)) { - /* cy_stop isn't used - because ... !!! */ - tty->hw_stopped = 1; - cyy_writeb(info, CySRER, - cyy_readb(info, CySRER) & ~CyTxRdy); - } - } - } -/* if (mdm_change & CyDSR) { - } - if (mdm_change & CyRI) { - }*/ - tty_kref_put(tty); -end: - /* end of service */ - cyy_writeb(info, CyMIR, save_xir & 0x3f); - cyy_writeb(info, CyCAR, save_car); -} - -/* The real interrupt service routine is called - whenever the card wants its hand held--chars - received, out buffer empty, modem change, etc. - */ -static irqreturn_t cyy_interrupt(int irq, void *dev_id) -{ - int status; - struct cyclades_card *cinfo = dev_id; - void __iomem *base_addr, *card_base_addr; - unsigned int chip, too_many, had_work; - int index; - - if (unlikely(cinfo == NULL)) { -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n", - irq); -#endif - return IRQ_NONE; /* spurious interrupt */ - } - - card_base_addr = cinfo->base_addr; - index = cinfo->bus_index; - - /* card was not initialized yet (e.g. DEBUG_SHIRQ) */ - if (unlikely(card_base_addr == NULL)) - return IRQ_HANDLED; - - /* This loop checks all chips in the card. Make a note whenever - _any_ chip had some work to do, as this is considered an - indication that there will be more to do. Only when no chip - has any work does this outermost loop exit. - */ - do { - had_work = 0; - for (chip = 0; chip < cinfo->num_chips; chip++) { - base_addr = cinfo->base_addr + - (cy_chip_offset[chip] << index); - too_many = 0; - while ((status = readb(base_addr + - (CySVRR << index))) != 0x00) { - had_work++; - /* The purpose of the following test is to ensure that - no chip can monopolize the driver. This forces the - chips to be checked in a round-robin fashion (after - draining each of a bunch (1000) of characters). - */ - if (1000 < too_many++) - break; - spin_lock(&cinfo->card_lock); - if (status & CySRReceive) /* rx intr */ - cyy_chip_rx(cinfo, chip, base_addr); - if (status & CySRTransmit) /* tx intr */ - cyy_chip_tx(cinfo, chip, base_addr); - if (status & CySRModem) /* modem intr */ - cyy_chip_modem(cinfo, chip, base_addr); - spin_unlock(&cinfo->card_lock); - } - } - } while (had_work); - - /* clear interrupts */ - spin_lock(&cinfo->card_lock); - cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0); - /* Cy_ClrIntr is 0x1800 */ - spin_unlock(&cinfo->card_lock); - return IRQ_HANDLED; -} /* cyy_interrupt */ - -static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set, - unsigned int clear) -{ - struct cyclades_card *card = info->card; - int channel = info->line - card->first_line; - u32 rts, dtr, msvrr, msvrd; - - channel &= 0x03; - - if (info->rtsdtr_inv) { - msvrr = CyMSVR2; - msvrd = CyMSVR1; - rts = CyDTR; - dtr = CyRTS; - } else { - msvrr = CyMSVR1; - msvrd = CyMSVR2; - rts = CyRTS; - dtr = CyDTR; - } - if (set & TIOCM_RTS) { - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, msvrr, rts); - } - if (clear & TIOCM_RTS) { - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, msvrr, ~rts); - } - if (set & TIOCM_DTR) { - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, msvrd, dtr); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n"); - printk(KERN_DEBUG " status: 0x%x, 0x%x\n", - cyy_readb(info, CyMSVR1), - cyy_readb(info, CyMSVR2)); -#endif - } - if (clear & TIOCM_DTR) { - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, msvrd, ~dtr); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n"); - printk(KERN_DEBUG " status: 0x%x, 0x%x\n", - cyy_readb(info, CyMSVR1), - cyy_readb(info, CyMSVR2)); -#endif - } -} - -/***********************************************************/ -/********* End of block of Cyclom-Y specific code **********/ -/******** Start of block of Cyclades-Z specific code *******/ -/***********************************************************/ - -static int -cyz_fetch_msg(struct cyclades_card *cinfo, - __u32 *channel, __u8 *cmd, __u32 *param) -{ - struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; - unsigned long loc_doorbell; - - loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell); - if (loc_doorbell) { - *cmd = (char)(0xff & loc_doorbell); - *channel = readl(&board_ctrl->fwcmd_channel); - *param = (__u32) readl(&board_ctrl->fwcmd_param); - cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff); - return 1; - } - return 0; -} /* cyz_fetch_msg */ - -static int -cyz_issue_cmd(struct cyclades_card *cinfo, - __u32 channel, __u8 cmd, __u32 param) -{ - struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; - __u32 __iomem *pci_doorbell; - unsigned int index; - - if (!cyz_is_loaded(cinfo)) - return -1; - - index = 0; - pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell; - while ((readl(pci_doorbell) & 0xff) != 0) { - if (index++ == 1000) - return (int)(readl(pci_doorbell) & 0xff); - udelay(50L); - } - cy_writel(&board_ctrl->hcmd_channel, channel); - cy_writel(&board_ctrl->hcmd_param, param); - cy_writel(pci_doorbell, (long)cmd); - - return 0; -} /* cyz_issue_cmd */ - -static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty) -{ - struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; - struct cyclades_card *cinfo = info->card; - unsigned int char_count; - int len; -#ifdef BLOCKMOVE - unsigned char *buf; -#else - char data; -#endif - __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; - - rx_get = new_rx_get = readl(&buf_ctrl->rx_get); - rx_put = readl(&buf_ctrl->rx_put); - rx_bufsize = readl(&buf_ctrl->rx_bufsize); - rx_bufaddr = readl(&buf_ctrl->rx_bufaddr); - if (rx_put >= rx_get) - char_count = rx_put - rx_get; - else - char_count = rx_put - rx_get + rx_bufsize; - - if (char_count) { -#ifdef CY_ENABLE_MONITORING - info->mon.int_count++; - info->mon.char_count += char_count; - if (char_count > info->mon.char_max) - info->mon.char_max = char_count; - info->mon.char_last = char_count; -#endif - if (tty == NULL) { - /* flush received characters */ - new_rx_get = (new_rx_get + char_count) & - (rx_bufsize - 1); - info->rflush_count++; - } else { -#ifdef BLOCKMOVE - /* we'd like to use memcpy(t, f, n) and memset(s, c, count) - for performance, but because of buffer boundaries, there - may be several steps to the operation */ - while (1) { - len = tty_prepare_flip_string(tty, &buf, - char_count); - if (!len) - break; - - len = min_t(unsigned int, min(len, char_count), - rx_bufsize - new_rx_get); - - memcpy_fromio(buf, cinfo->base_addr + - rx_bufaddr + new_rx_get, len); - - new_rx_get = (new_rx_get + len) & - (rx_bufsize - 1); - char_count -= len; - info->icount.rx += len; - info->idle_stats.recv_bytes += len; - } -#else - len = tty_buffer_request_room(tty, char_count); - while (len--) { - data = readb(cinfo->base_addr + rx_bufaddr + - new_rx_get); - new_rx_get = (new_rx_get + 1) & - (rx_bufsize - 1); - tty_insert_flip_char(tty, data, TTY_NORMAL); - info->idle_stats.recv_bytes++; - info->icount.rx++; - } -#endif -#ifdef CONFIG_CYZ_INTR - /* Recalculate the number of chars in the RX buffer and issue - a cmd in case it's higher than the RX high water mark */ - rx_put = readl(&buf_ctrl->rx_put); - if (rx_put >= rx_get) - char_count = rx_put - rx_get; - else - char_count = rx_put - rx_get + rx_bufsize; - if (char_count >= readl(&buf_ctrl->rx_threshold) && - !timer_pending(&cyz_rx_full_timer[ - info->line])) - mod_timer(&cyz_rx_full_timer[info->line], - jiffies + 1); -#endif - info->idle_stats.recv_idle = jiffies; - tty_schedule_flip(tty); - } - /* Update rx_get */ - cy_writel(&buf_ctrl->rx_get, new_rx_get); - } -} - -static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty) -{ - struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; - struct cyclades_card *cinfo = info->card; - u8 data; - unsigned int char_count; -#ifdef BLOCKMOVE - int small_count; -#endif - __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr; - - if (info->xmit_cnt <= 0) /* Nothing to transmit */ - return; - - tx_get = readl(&buf_ctrl->tx_get); - tx_put = readl(&buf_ctrl->tx_put); - tx_bufsize = readl(&buf_ctrl->tx_bufsize); - tx_bufaddr = readl(&buf_ctrl->tx_bufaddr); - if (tx_put >= tx_get) - char_count = tx_get - tx_put - 1 + tx_bufsize; - else - char_count = tx_get - tx_put - 1; - - if (char_count) { - - if (tty == NULL) - goto ztxdone; - - if (info->x_char) { /* send special char */ - data = info->x_char; - - cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); - tx_put = (tx_put + 1) & (tx_bufsize - 1); - info->x_char = 0; - char_count--; - info->icount.tx++; - } -#ifdef BLOCKMOVE - while (0 < (small_count = min_t(unsigned int, - tx_bufsize - tx_put, min_t(unsigned int, - (SERIAL_XMIT_SIZE - info->xmit_tail), - min_t(unsigned int, info->xmit_cnt, - char_count))))) { - - memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + - tx_put), - &info->port.xmit_buf[info->xmit_tail], - small_count); - - tx_put = (tx_put + small_count) & (tx_bufsize - 1); - char_count -= small_count; - info->icount.tx += small_count; - info->xmit_cnt -= small_count; - info->xmit_tail = (info->xmit_tail + small_count) & - (SERIAL_XMIT_SIZE - 1); - } -#else - while (info->xmit_cnt && char_count) { - data = info->port.xmit_buf[info->xmit_tail]; - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) & - (SERIAL_XMIT_SIZE - 1); - - cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); - tx_put = (tx_put + 1) & (tx_bufsize - 1); - char_count--; - info->icount.tx++; - } -#endif - tty_wakeup(tty); -ztxdone: - /* Update tx_put */ - cy_writel(&buf_ctrl->tx_put, tx_put); - } -} - -static void cyz_handle_cmd(struct cyclades_card *cinfo) -{ - struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; - struct tty_struct *tty; - struct cyclades_port *info; - __u32 channel, param, fw_ver; - __u8 cmd; - int special_count; - int delta_count; - - fw_ver = readl(&board_ctrl->fw_version); - - while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { - special_count = 0; - delta_count = 0; - info = &cinfo->ports[channel]; - tty = tty_port_tty_get(&info->port); - if (tty == NULL) - continue; - - switch (cmd) { - case C_CM_PR_ERROR: - tty_insert_flip_char(tty, 0, TTY_PARITY); - info->icount.rx++; - special_count++; - break; - case C_CM_FR_ERROR: - tty_insert_flip_char(tty, 0, TTY_FRAME); - info->icount.rx++; - special_count++; - break; - case C_CM_RXBRK: - tty_insert_flip_char(tty, 0, TTY_BREAK); - info->icount.rx++; - special_count++; - break; - case C_CM_MDCD: - info->icount.dcd++; - delta_count++; - if (info->port.flags & ASYNC_CHECK_CD) { - u32 dcd = fw_ver > 241 ? param : - readl(&info->u.cyz.ch_ctrl->rs_status); - if (dcd & C_RS_DCD) - wake_up_interruptible(&info->port.open_wait); - else - tty_hangup(tty); - } - break; - case C_CM_MCTS: - info->icount.cts++; - delta_count++; - break; - case C_CM_MRI: - info->icount.rng++; - delta_count++; - break; - case C_CM_MDSR: - info->icount.dsr++; - delta_count++; - break; -#ifdef Z_WAKE - case C_CM_IOCTLW: - complete(&info->shutdown_wait); - break; -#endif -#ifdef CONFIG_CYZ_INTR - case C_CM_RXHIWM: - case C_CM_RXNNDT: - case C_CM_INTBACK2: - /* Reception Interrupt */ -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, " - "port %ld\n", info->card, channel); -#endif - cyz_handle_rx(info, tty); - break; - case C_CM_TXBEMPTY: - case C_CM_TXLOWWM: - case C_CM_INTBACK: - /* Transmission Interrupt */ -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, " - "port %ld\n", info->card, channel); -#endif - cyz_handle_tx(info, tty); - break; -#endif /* CONFIG_CYZ_INTR */ - case C_CM_FATAL: - /* should do something with this !!! */ - break; - default: - break; - } - if (delta_count) - wake_up_interruptible(&info->port.delta_msr_wait); - if (special_count) - tty_schedule_flip(tty); - tty_kref_put(tty); - } -} - -#ifdef CONFIG_CYZ_INTR -static irqreturn_t cyz_interrupt(int irq, void *dev_id) -{ - struct cyclades_card *cinfo = dev_id; - - if (unlikely(!cyz_is_loaded(cinfo))) { -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " - "(IRQ%d).\n", irq); -#endif - return IRQ_NONE; - } - - /* Handle the interrupts */ - cyz_handle_cmd(cinfo); - - return IRQ_HANDLED; -} /* cyz_interrupt */ - -static void cyz_rx_restart(unsigned long arg) -{ - struct cyclades_port *info = (struct cyclades_port *)arg; - struct cyclades_card *card = info->card; - int retval; - __u32 channel = info->line - card->first_line; - unsigned long flags; - - spin_lock_irqsave(&card->card_lock, flags); - retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n", - info->line, retval); - } - spin_unlock_irqrestore(&card->card_lock, flags); -} - -#else /* CONFIG_CYZ_INTR */ - -static void cyz_poll(unsigned long arg) -{ - struct cyclades_card *cinfo; - struct cyclades_port *info; - unsigned long expires = jiffies + HZ; - unsigned int port, card; - - for (card = 0; card < NR_CARDS; card++) { - cinfo = &cy_card[card]; - - if (!cy_is_Z(cinfo)) - continue; - if (!cyz_is_loaded(cinfo)) - continue; - - /* Skip first polling cycle to avoid racing conditions with the FW */ - if (!cinfo->intr_enabled) { - cinfo->intr_enabled = 1; - continue; - } - - cyz_handle_cmd(cinfo); - - for (port = 0; port < cinfo->nports; port++) { - struct tty_struct *tty; - - info = &cinfo->ports[port]; - tty = tty_port_tty_get(&info->port); - /* OK to pass NULL to the handle functions below. - They need to drop the data in that case. */ - - if (!info->throttle) - cyz_handle_rx(info, tty); - cyz_handle_tx(info, tty); - tty_kref_put(tty); - } - /* poll every 'cyz_polling_cycle' period */ - expires = jiffies + cyz_polling_cycle; - } - mod_timer(&cyz_timerlist, expires); -} /* cyz_poll */ - -#endif /* CONFIG_CYZ_INTR */ - -/********** End of block of Cyclades-Z specific code *********/ -/***********************************************************/ - -/* This is called whenever a port becomes active; - interrupts are enabled and DTR & RTS are turned on. - */ -static int cy_startup(struct cyclades_port *info, struct tty_struct *tty) -{ - struct cyclades_card *card; - unsigned long flags; - int retval = 0; - int channel; - unsigned long page; - - card = info->card; - channel = info->line - card->first_line; - - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - spin_lock_irqsave(&card->card_lock, flags); - - if (info->port.flags & ASYNC_INITIALIZED) - goto errout; - - if (!info->type) { - set_bit(TTY_IO_ERROR, &tty->flags); - goto errout; - } - - if (info->port.xmit_buf) - free_page(page); - else - info->port.xmit_buf = (unsigned char *)page; - - spin_unlock_irqrestore(&card->card_lock, flags); - - cy_set_line_char(info, tty); - - if (!cy_is_Z(card)) { - channel &= 0x03; - - spin_lock_irqsave(&card->card_lock, flags); - - cyy_writeb(info, CyCAR, channel); - - cyy_writeb(info, CyRTPR, - (info->default_timeout ? info->default_timeout : 0x02)); - /* 10ms rx timeout */ - - cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR); - - cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0); - - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData); - } else { - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - - if (!cyz_is_loaded(card)) - return -ENODEV; - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc startup Z card %d, channel %d, " - "base_addr %p\n", card, channel, card->base_addr); -#endif - spin_lock_irqsave(&card->card_lock, flags); - - cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE); -#ifdef Z_WAKE -#ifdef CONFIG_CYZ_INTR - cy_writel(&ch_ctrl->intr_enable, - C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | - C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD); -#else - cy_writel(&ch_ctrl->intr_enable, - C_IN_IOCTLW | C_IN_MDCD); -#endif /* CONFIG_CYZ_INTR */ -#else -#ifdef CONFIG_CYZ_INTR - cy_writel(&ch_ctrl->intr_enable, - C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | - C_IN_RXNNDT | C_IN_MDCD); -#else - cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD); -#endif /* CONFIG_CYZ_INTR */ -#endif /* Z_WAKE */ - - retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was " - "%x\n", info->line, retval); - } - - /* Flush RX buffers before raising DTR and RTS */ - retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was " - "%x\n", info->line, retval); - } - - /* set timeout !!! */ - /* set RTS and DTR !!! */ - tty_port_raise_dtr_rts(&info->port); - - /* enable send, recv, modem !!! */ - } - - info->port.flags |= ASYNC_INITIALIZED; - - clear_bit(TTY_IO_ERROR, &tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - info->breakon = info->breakoff = 0; - memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); - info->idle_stats.in_use = - info->idle_stats.recv_idle = - info->idle_stats.xmit_idle = jiffies; - - spin_unlock_irqrestore(&card->card_lock, flags); - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc startup done\n"); -#endif - return 0; - -errout: - spin_unlock_irqrestore(&card->card_lock, flags); - free_page(page); - return retval; -} /* startup */ - -static void start_xmit(struct cyclades_port *info) -{ - struct cyclades_card *card = info->card; - unsigned long flags; - int channel = info->line - card->first_line; - - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { -#ifdef CONFIG_CYZ_INTR - int retval; - - spin_lock_irqsave(&card->card_lock, flags); - retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was " - "%x\n", info->line, retval); - } - spin_unlock_irqrestore(&card->card_lock, flags); -#else /* CONFIG_CYZ_INTR */ - /* Don't have to do anything at this time */ -#endif /* CONFIG_CYZ_INTR */ - } -} /* start_xmit */ - -/* - * This routine shuts down a serial port; interrupts are disabled, - * and DTR is dropped if the hangup on close termio flag is on. - */ -static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty) -{ - struct cyclades_card *card; - unsigned long flags; - int channel; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - - card = info->card; - channel = info->line - card->first_line; - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - - /* Clear delta_msr_wait queue to avoid mem leaks. */ - wake_up_interruptible(&info->port.delta_msr_wait); - - if (info->port.xmit_buf) { - unsigned char *temp; - temp = info->port.xmit_buf; - info->port.xmit_buf = NULL; - free_page((unsigned long)temp); - } - if (tty->termios->c_cflag & HUPCL) - cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR); - - cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR); - /* it may be appropriate to clear _XMIT at - some later date (after testing)!!! */ - - set_bit(TTY_IO_ERROR, &tty->flags); - info->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&card->card_lock, flags); - } else { -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, " - "base_addr %p\n", card, channel, card->base_addr); -#endif - - if (!cyz_is_loaded(card)) - return; - - spin_lock_irqsave(&card->card_lock, flags); - - if (info->port.xmit_buf) { - unsigned char *temp; - temp = info->port.xmit_buf; - info->port.xmit_buf = NULL; - free_page((unsigned long)temp); - } - - if (tty->termios->c_cflag & HUPCL) - tty_port_lower_dtr_rts(&info->port); - - set_bit(TTY_IO_ERROR, &tty->flags); - info->port.flags &= ~ASYNC_INITIALIZED; - - spin_unlock_irqrestore(&card->card_lock, flags); - } - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc shutdown done\n"); -#endif -} /* shutdown */ - -/* - * ------------------------------------------------------------ - * cy_open() and friends - * ------------------------------------------------------------ - */ - -/* - * This routine is called whenever a serial port is opened. It - * performs the serial-specific initialization for the tty structure. - */ -static int cy_open(struct tty_struct *tty, struct file *filp) -{ - struct cyclades_port *info; - unsigned int i, line; - int retval; - - line = tty->index; - if (tty->index < 0 || NR_PORTS <= line) - return -ENODEV; - - for (i = 0; i < NR_CARDS; i++) - if (line < cy_card[i].first_line + cy_card[i].nports && - line >= cy_card[i].first_line) - break; - if (i >= NR_CARDS) - return -ENODEV; - info = &cy_card[i].ports[line - cy_card[i].first_line]; - if (info->line < 0) - return -ENODEV; - - /* If the card's firmware hasn't been loaded, - treat it as absent from the system. This - will make the user pay attention. - */ - if (cy_is_Z(info->card)) { - struct cyclades_card *cinfo = info->card; - struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; - - if (!cyz_is_loaded(cinfo)) { - if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) && - readl(&firm_id->signature) == - ZFIRM_HLT) { - printk(KERN_ERR "cyc:Cyclades-Z Error: you " - "need an external power supply for " - "this number of ports.\nFirmware " - "halted.\n"); - } else { - printk(KERN_ERR "cyc:Cyclades-Z firmware not " - "yet loaded\n"); - } - return -ENODEV; - } -#ifdef CONFIG_CYZ_INTR - else { - /* In case this Z board is operating in interrupt mode, its - interrupts should be enabled as soon as the first open - happens to one of its ports. */ - if (!cinfo->intr_enabled) { - u16 intr; - - /* Enable interrupts on the PLX chip */ - intr = readw(&cinfo->ctl_addr.p9060-> - intr_ctrl_stat) | 0x0900; - cy_writew(&cinfo->ctl_addr.p9060-> - intr_ctrl_stat, intr); - /* Enable interrupts on the FW */ - retval = cyz_issue_cmd(cinfo, 0, - C_CM_IRQ_ENBL, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:IRQ enable retval " - "was %x\n", retval); - } - cinfo->intr_enabled = 1; - } - } -#endif /* CONFIG_CYZ_INTR */ - /* Make sure this Z port really exists in hardware */ - if (info->line > (cinfo->first_line + cinfo->nports - 1)) - return -ENODEV; - } -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); -#endif - tty->driver_data = info; - if (serial_paranoia_check(info, tty->name, "cy_open")) - return -ENODEV; - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, - info->port.count); -#endif - info->port.count++; -#ifdef CY_DEBUG_COUNT - printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", - current->pid, info->port.count); -#endif - - /* - * If the port is the middle of closing, bail out now - */ - if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(info->port.close_wait, - !(info->port.flags & ASYNC_CLOSING)); - return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; - } - - /* - * Start up serial port - */ - retval = cy_startup(info, tty); - if (retval) - return retval; - - retval = tty_port_block_til_ready(&info->port, tty, filp); - if (retval) { -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready " - "with %d\n", retval); -#endif - return retval; - } - - info->throttle = 0; - tty_port_tty_set(&info->port, tty); - -#ifdef CY_DEBUG_OPEN - printk(KERN_DEBUG "cyc:cy_open done\n"); -#endif - return 0; -} /* cy_open */ - -/* - * cy_wait_until_sent() --- wait until the transmitter is empty - */ -static void cy_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct cyclades_card *card; - struct cyclades_port *info = tty->driver_data; - unsigned long orig_jiffies; - int char_time; - - if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent")) - return; - - if (info->xmit_fifo_size == 0) - return; /* Just in case.... */ - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time <= 0) - char_time = 1; - if (timeout < 0) - timeout = 0; - if (timeout) - char_time = min(char_time, timeout); - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2 * info->timeout) - timeout = 2 * info->timeout; -#ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...", - timeout, char_time, jiffies); -#endif - card = info->card; - if (!cy_is_Z(card)) { - while (cyy_readb(info, CySRER) & CyTxRdy) { -#ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies); -#endif - if (msleep_interruptible(jiffies_to_msecs(char_time))) - break; - if (timeout && time_after(jiffies, orig_jiffies + - timeout)) - break; - } - } - /* Run one more char cycle */ - msleep_interruptible(jiffies_to_msecs(char_time * 5)); -#ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies); -#endif -} - -static void cy_flush_buffer(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - int channel, retval; - unsigned long flags; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) - return; - - card = info->card; - channel = info->line - card->first_line; - - spin_lock_irqsave(&card->card_lock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&card->card_lock, flags); - - if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board - buffers as well */ - spin_lock_irqsave(&card->card_lock, flags); - retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d " - "was %x\n", info->line, retval); - } - spin_unlock_irqrestore(&card->card_lock, flags); - } - tty_wakeup(tty); -} /* cy_flush_buffer */ - - -static void cy_do_close(struct tty_port *port) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - struct cyclades_card *card; - unsigned long flags; - int channel; - - card = info->card; - channel = info->line - card->first_line; - spin_lock_irqsave(&card->card_lock, flags); - - if (!cy_is_Z(card)) { - /* Stop accepting input */ - cyy_writeb(info, CyCAR, channel & 0x03); - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData); - if (info->port.flags & ASYNC_INITIALIZED) { - /* Waiting for on-board buffers to be empty before - closing the port */ - spin_unlock_irqrestore(&card->card_lock, flags); - cy_wait_until_sent(port->tty, info->timeout); - spin_lock_irqsave(&card->card_lock, flags); - } - } else { -#ifdef Z_WAKE - /* Waiting for on-board buffers to be empty before closing - the port */ - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - int retval; - - if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) { - retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L); - if (retval != 0) { - printk(KERN_DEBUG "cyc:cy_close retval on " - "ttyC%d was %x\n", info->line, retval); - } - spin_unlock_irqrestore(&card->card_lock, flags); - wait_for_completion_interruptible(&info->shutdown_wait); - spin_lock_irqsave(&card->card_lock, flags); - } -#endif - } - spin_unlock_irqrestore(&card->card_lock, flags); - cy_shutdown(info, port->tty); -} - -/* - * This routine is called when a particular tty device is closed. - */ -static void cy_close(struct tty_struct *tty, struct file *filp) -{ - struct cyclades_port *info = tty->driver_data; - if (!info || serial_paranoia_check(info, tty->name, "cy_close")) - return; - tty_port_close(&info->port, tty, filp); -} /* cy_close */ - -/* This routine gets called when tty_write has put something into - * the write_queue. The characters may come from user space or - * kernel space. - * - * This routine will return the number of characters actually - * accepted for writing. - * - * If the port is not already transmitting stuff, start it off by - * enabling interrupts. The interrupt service routine will then - * ensure that the characters are sent. - * If the port is already active, there is no need to kick it. - * - */ -static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - int c, ret = 0; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_write")) - return 0; - - if (!info->port.xmit_buf) - return 0; - - spin_lock_irqsave(&info->card->card_lock, flags); - while (1) { - c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1)); - c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head)); - - if (c <= 0) - break; - - memcpy(info->port.xmit_buf + info->xmit_head, buf, c); - info->xmit_head = (info->xmit_head + c) & - (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - buf += c; - count -= c; - ret += c; - } - spin_unlock_irqrestore(&info->card->card_lock, flags); - - info->idle_stats.xmit_bytes += ret; - info->idle_stats.xmit_idle = jiffies; - - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) - start_xmit(info); - - return ret; -} /* cy_write */ - -/* - * This routine is called by the kernel to write a single - * character to the tty device. If the kernel uses this routine, - * it must call the flush_chars() routine (if defined) when it is - * done stuffing characters into the driver. If there is no room - * in the queue, the character is ignored. - */ -static int cy_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_put_char")) - return 0; - - if (!info->port.xmit_buf) - return 0; - - spin_lock_irqsave(&info->card->card_lock, flags); - if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) { - spin_unlock_irqrestore(&info->card->card_lock, flags); - return 0; - } - - info->port.xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; - info->idle_stats.xmit_bytes++; - info->idle_stats.xmit_idle = jiffies; - spin_unlock_irqrestore(&info->card->card_lock, flags); - return 1; -} /* cy_put_char */ - -/* - * This routine is called by the kernel after it has written a - * series of characters to the tty device using put_char(). - */ -static void cy_flush_chars(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) - return; - - if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !info->port.xmit_buf) - return; - - start_xmit(info); -} /* cy_flush_chars */ - -/* - * This routine returns the numbers of characters the tty driver - * will accept for queuing to be written. This number is subject - * to change as output buffers get emptied, or if the output flow - * control is activated. - */ -static int cy_write_room(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - int ret; - -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} /* cy_write_room */ - -static int cy_chars_in_buffer(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) - return 0; - -#ifdef Z_EXT_CHARS_IN_BUFFER - if (!cy_is_Z(info->card)) { -#endif /* Z_EXT_CHARS_IN_BUFFER */ -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", - info->line, info->xmit_cnt); -#endif - return info->xmit_cnt; -#ifdef Z_EXT_CHARS_IN_BUFFER - } else { - struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; - int char_count; - __u32 tx_put, tx_get, tx_bufsize; - - tx_get = readl(&buf_ctrl->tx_get); - tx_put = readl(&buf_ctrl->tx_put); - tx_bufsize = readl(&buf_ctrl->tx_bufsize); - if (tx_put >= tx_get) - char_count = tx_put - tx_get; - else - char_count = tx_put - tx_get + tx_bufsize; -#ifdef CY_DEBUG_IO - printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", - info->line, info->xmit_cnt + char_count); -#endif - return info->xmit_cnt + char_count; - } -#endif /* Z_EXT_CHARS_IN_BUFFER */ -} /* cy_chars_in_buffer */ - -/* - * ------------------------------------------------------------ - * cy_ioctl() and friends - * ------------------------------------------------------------ - */ - -static void cyy_baud_calc(struct cyclades_port *info, __u32 baud) -{ - int co, co_val, bpr; - __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : - 25000000); - - if (baud == 0) { - info->tbpr = info->tco = info->rbpr = info->rco = 0; - return; - } - - /* determine which prescaler to use */ - for (co = 4, co_val = 2048; co; co--, co_val >>= 2) { - if (cy_clock / co_val / baud > 63) - break; - } - - bpr = (cy_clock / co_val * 2 / baud + 1) / 2; - if (bpr > 255) - bpr = 255; - - info->tbpr = info->rbpr = bpr; - info->tco = info->rco = co; -} - -/* - * This routine finds or computes the various line characteristics. - * It used to be called config_setup - */ -static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty) -{ - struct cyclades_card *card; - unsigned long flags; - int channel; - unsigned cflag, iflag; - int baud, baud_rate = 0; - int i; - - if (!tty->termios) /* XXX can this happen at all? */ - return; - - if (info->line == -1) - return; - - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; - - /* - * Set up the tty->alt_speed kludge - */ - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - - card = info->card; - channel = info->line - card->first_line; - - if (!cy_is_Z(card)) { - u32 cflags; - - /* baud rate */ - baud = tty_get_baud_rate(tty); - if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - if (info->custom_divisor) - baud_rate = info->baud / info->custom_divisor; - else - baud_rate = info->baud; - } else if (baud > CD1400_MAX_SPEED) { - baud = CD1400_MAX_SPEED; - } - /* find the baud index */ - for (i = 0; i < 20; i++) { - if (baud == baud_table[i]) - break; - } - if (i == 20) - i = 19; /* CD1400_MAX_SPEED */ - - if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - cyy_baud_calc(info, baud_rate); - } else { - if (info->chip_rev >= CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - info->tbpr = baud_bpr_60[i]; /* Tx BPR */ - info->tco = baud_co_60[i]; /* Tx CO */ - info->rbpr = baud_bpr_60[i]; /* Rx BPR */ - info->rco = baud_co_60[i]; /* Rx CO */ - } else { - info->tbpr = baud_bpr_25[i]; /* Tx BPR */ - info->tco = baud_co_25[i]; /* Tx CO */ - info->rbpr = baud_bpr_25[i]; /* Rx BPR */ - info->rco = baud_co_25[i]; /* Rx CO */ - } - } - if (baud_table[i] == 134) { - /* get it right for 134.5 baud */ - info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + - 2; - } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - info->timeout = (info->xmit_fifo_size * HZ * 15 / - baud_rate) + 2; - } else if (baud_table[i]) { - info->timeout = (info->xmit_fifo_size * HZ * 15 / - baud_table[i]) + 2; - /* this needs to be propagated into the card info */ - } else { - info->timeout = 0; - } - /* By tradition (is it a standard?) a baud rate of zero - implies the line should be/has been closed. A bit - later in this routine such a test is performed. */ - - /* byte size and parity */ - info->cor5 = 0; - info->cor4 = 0; - /* receive threshold */ - info->cor3 = (info->default_threshold ? - info->default_threshold : baud_cor3[i]); - info->cor2 = CyETC; - switch (cflag & CSIZE) { - case CS5: - info->cor1 = Cy_5_BITS; - break; - case CS6: - info->cor1 = Cy_6_BITS; - break; - case CS7: - info->cor1 = Cy_7_BITS; - break; - case CS8: - info->cor1 = Cy_8_BITS; - break; - } - if (cflag & CSTOPB) - info->cor1 |= Cy_2_STOP; - - if (cflag & PARENB) { - if (cflag & PARODD) - info->cor1 |= CyPARITY_O; - else - info->cor1 |= CyPARITY_E; - } else - info->cor1 |= CyPARITY_NONE; - - /* CTS flow control flag */ - if (cflag & CRTSCTS) { - info->port.flags |= ASYNC_CTS_FLOW; - info->cor2 |= CyCtsAE; - } else { - info->port.flags &= ~ASYNC_CTS_FLOW; - info->cor2 &= ~CyCtsAE; - } - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - /*********************************************** - The hardware option, CyRtsAO, presents RTS when - the chip has characters to send. Since most modems - use RTS as reverse (inbound) flow control, this - option is not used. If inbound flow control is - necessary, DTR can be programmed to provide the - appropriate signals for use with a non-standard - cable. Contact Marcio Saito for details. - ***********************************************/ - - channel &= 0x03; - - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyCAR, channel); - - /* tx and rx baud rate */ - - cyy_writeb(info, CyTCOR, info->tco); - cyy_writeb(info, CyTBPR, info->tbpr); - cyy_writeb(info, CyRCOR, info->rco); - cyy_writeb(info, CyRBPR, info->rbpr); - - /* set line characteristics according configuration */ - - cyy_writeb(info, CySCHR1, START_CHAR(tty)); - cyy_writeb(info, CySCHR2, STOP_CHAR(tty)); - cyy_writeb(info, CyCOR1, info->cor1); - cyy_writeb(info, CyCOR2, info->cor2); - cyy_writeb(info, CyCOR3, info->cor3); - cyy_writeb(info, CyCOR4, info->cor4); - cyy_writeb(info, CyCOR5, info->cor5); - - cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch | - CyCOR3ch); - - /* !!! Is this needed? */ - cyy_writeb(info, CyCAR, channel); - cyy_writeb(info, CyRTPR, - (info->default_timeout ? info->default_timeout : 0x02)); - /* 10ms rx timeout */ - - cflags = CyCTS; - if (!C_CLOCAL(tty)) - cflags |= CyDSR | CyRI | CyDCD; - /* without modem intr */ - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh); - /* act on 1->0 modem transitions */ - if ((cflag & CRTSCTS) && info->rflow) - cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]); - else - cyy_writeb(info, CyMCOR1, cflags); - /* act on 0->1 modem transitions */ - cyy_writeb(info, CyMCOR2, cflags); - - if (i == 0) /* baud rate is zero, turn off line */ - cyy_change_rts_dtr(info, 0, TIOCM_DTR); - else - cyy_change_rts_dtr(info, TIOCM_DTR, 0); - - clear_bit(TTY_IO_ERROR, &tty->flags); - spin_unlock_irqrestore(&card->card_lock, flags); - - } else { - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - __u32 sw_flow; - int retval; - - if (!cyz_is_loaded(card)) - return; - - /* baud rate */ - baud = tty_get_baud_rate(tty); - if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - if (info->custom_divisor) - baud_rate = info->baud / info->custom_divisor; - else - baud_rate = info->baud; - } else if (baud > CYZ_MAX_SPEED) { - baud = CYZ_MAX_SPEED; - } - cy_writel(&ch_ctrl->comm_baud, baud); - - if (baud == 134) { - /* get it right for 134.5 baud */ - info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + - 2; - } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == - ASYNC_SPD_CUST) { - info->timeout = (info->xmit_fifo_size * HZ * 15 / - baud_rate) + 2; - } else if (baud) { - info->timeout = (info->xmit_fifo_size * HZ * 15 / - baud) + 2; - /* this needs to be propagated into the card info */ - } else { - info->timeout = 0; - } - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5); - break; - case CS6: - cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6); - break; - case CS7: - cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7); - break; - case CS8: - cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8); - break; - } - if (cflag & CSTOPB) { - cy_writel(&ch_ctrl->comm_data_l, - readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); - } else { - cy_writel(&ch_ctrl->comm_data_l, - readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); - } - if (cflag & PARENB) { - if (cflag & PARODD) - cy_writel(&ch_ctrl->comm_parity, C_PR_ODD); - else - cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN); - } else - cy_writel(&ch_ctrl->comm_parity, C_PR_NONE); - - /* CTS flow control flag */ - if (cflag & CRTSCTS) { - cy_writel(&ch_ctrl->hw_flow, - readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS); - } else { - cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) & - ~(C_RS_CTS | C_RS_RTS)); - } - /* As the HW flow control is done in firmware, the driver - doesn't need to care about it */ - info->port.flags &= ~ASYNC_CTS_FLOW; - - /* XON/XOFF/XANY flow control flags */ - sw_flow = 0; - if (iflag & IXON) { - sw_flow |= C_FL_OXX; - if (iflag & IXANY) - sw_flow |= C_FL_OIXANY; - } - cy_writel(&ch_ctrl->sw_flow, sw_flow); - - retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:set_line_char retval on ttyC%d " - "was %x\n", info->line, retval); - } - - /* CD sensitivity */ - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - if (baud == 0) { /* baud rate is zero, turn off line */ - cy_writel(&ch_ctrl->rs_control, - readl(&ch_ctrl->rs_control) & ~C_RS_DTR); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n"); -#endif - } else { - cy_writel(&ch_ctrl->rs_control, - readl(&ch_ctrl->rs_control) | C_RS_DTR); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n"); -#endif - } - - retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " - "was %x\n", info->line, retval); - } - - clear_bit(TTY_IO_ERROR, &tty->flags); - } -} /* set_line_char */ - -static int cy_get_serial_info(struct cyclades_port *info, - struct serial_struct __user *retinfo) -{ - struct cyclades_card *cinfo = info->card; - struct serial_struct tmp = { - .type = info->type, - .line = info->line, - .port = (info->card - cy_card) * 0x100 + info->line - - cinfo->first_line, - .irq = cinfo->irq, - .flags = info->port.flags, - .close_delay = info->port.close_delay, - .closing_wait = info->port.closing_wait, - .baud_base = info->baud, - .custom_divisor = info->custom_divisor, - .hub6 = 0, /*!!! */ - }; - return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; -} - -static int -cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, - struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - int ret; - - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - mutex_lock(&info->port.mutex); - if (!capable(CAP_SYS_ADMIN)) { - if (new_serial.close_delay != info->port.close_delay || - new_serial.baud_base != info->baud || - (new_serial.flags & ASYNC_FLAGS & - ~ASYNC_USR_MASK) != - (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) - { - mutex_unlock(&info->port.mutex); - return -EPERM; - } - info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK); - info->baud = new_serial.baud_base; - info->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud = new_serial.baud_base; - info->custom_divisor = new_serial.custom_divisor; - info->port.flags = (info->port.flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS); - info->port.close_delay = new_serial.close_delay * HZ / 100; - info->port.closing_wait = new_serial.closing_wait * HZ / 100; - -check_and_exit: - if (info->port.flags & ASYNC_INITIALIZED) { - cy_set_line_char(info, tty); - ret = 0; - } else { - ret = cy_startup(info, tty); - } - mutex_unlock(&info->port.mutex); - return ret; -} /* set_serial_info */ - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) -{ - struct cyclades_card *card = info->card; - unsigned int result; - unsigned long flags; - u8 status; - - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty); - spin_unlock_irqrestore(&card->card_lock, flags); - result = (status ? 0 : TIOCSER_TEMT); - } else { - /* Not supported yet */ - return -EINVAL; - } - return put_user(result, (unsigned long __user *)value); -} - -static int cy_tiocmget(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - int result; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - card = info->card; - - if (!cy_is_Z(card)) { - unsigned long flags; - int channel = info->line - card->first_line; - u8 status; - - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - status = cyy_readb(info, CyMSVR1); - status |= cyy_readb(info, CyMSVR2); - spin_unlock_irqrestore(&card->card_lock, flags); - - if (info->rtsdtr_inv) { - result = ((status & CyRTS) ? TIOCM_DTR : 0) | - ((status & CyDTR) ? TIOCM_RTS : 0); - } else { - result = ((status & CyRTS) ? TIOCM_RTS : 0) | - ((status & CyDTR) ? TIOCM_DTR : 0); - } - result |= ((status & CyDCD) ? TIOCM_CAR : 0) | - ((status & CyRI) ? TIOCM_RNG : 0) | - ((status & CyDSR) ? TIOCM_DSR : 0) | - ((status & CyCTS) ? TIOCM_CTS : 0); - } else { - u32 lstatus; - - if (!cyz_is_loaded(card)) { - result = -ENODEV; - goto end; - } - - lstatus = readl(&info->u.cyz.ch_ctrl->rs_status); - result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) | - ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) | - ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) | - ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) | - ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) | - ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); - } -end: - return result; -} /* cy_tiomget */ - -static int -cy_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - card = info->card; - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_change_rts_dtr(info, set, clear); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - int retval, channel = info->line - card->first_line; - u32 rs; - - if (!cyz_is_loaded(card)) - return -ENODEV; - - spin_lock_irqsave(&card->card_lock, flags); - rs = readl(&ch_ctrl->rs_control); - if (set & TIOCM_RTS) - rs |= C_RS_RTS; - if (clear & TIOCM_RTS) - rs &= ~C_RS_RTS; - if (set & TIOCM_DTR) { - rs |= C_RS_DTR; -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n"); -#endif - } - if (clear & TIOCM_DTR) { - rs &= ~C_RS_DTR; -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "cyc:set_modem_info clearing " - "Z DTR\n"); -#endif - } - cy_writel(&ch_ctrl->rs_control, rs); - retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); - spin_unlock_irqrestore(&card->card_lock, flags); - if (retval != 0) { - printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d " - "was %x\n", info->line, retval); - } - } - return 0; -} - -/* - * cy_break() --- routine which turns the break handling on or off - */ -static int cy_break(struct tty_struct *tty, int break_state) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - unsigned long flags; - int retval = 0; - - if (serial_paranoia_check(info, tty->name, "cy_break")) - return -EINVAL; - - card = info->card; - - spin_lock_irqsave(&card->card_lock, flags); - if (!cy_is_Z(card)) { - /* Let the transmit ISR take care of this (since it - requires stuffing characters into the output stream). - */ - if (break_state == -1) { - if (!info->breakon) { - info->breakon = 1; - if (!info->xmit_cnt) { - spin_unlock_irqrestore(&card->card_lock, flags); - start_xmit(info); - spin_lock_irqsave(&card->card_lock, flags); - } - } - } else { - if (!info->breakoff) { - info->breakoff = 1; - if (!info->xmit_cnt) { - spin_unlock_irqrestore(&card->card_lock, flags); - start_xmit(info); - spin_lock_irqsave(&card->card_lock, flags); - } - } - } - } else { - if (break_state == -1) { - retval = cyz_issue_cmd(card, - info->line - card->first_line, - C_CM_SET_BREAK, 0L); - if (retval != 0) { - printk(KERN_ERR "cyc:cy_break (set) retval on " - "ttyC%d was %x\n", info->line, retval); - } - } else { - retval = cyz_issue_cmd(card, - info->line - card->first_line, - C_CM_CLR_BREAK, 0L); - if (retval != 0) { - printk(KERN_DEBUG "cyc:cy_break (clr) retval " - "on ttyC%d was %x\n", info->line, - retval); - } - } - } - spin_unlock_irqrestore(&card->card_lock, flags); - return retval; -} /* cy_break */ - -static int set_threshold(struct cyclades_port *info, unsigned long value) -{ - struct cyclades_card *card = info->card; - unsigned long flags; - - if (!cy_is_Z(card)) { - info->cor3 &= ~CyREC_FIFO; - info->cor3 |= value & CyREC_FIFO; - - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyCOR3, info->cor3); - cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch); - spin_unlock_irqrestore(&card->card_lock, flags); - } - return 0; -} /* set_threshold */ - -static int get_threshold(struct cyclades_port *info, - unsigned long __user *value) -{ - struct cyclades_card *card = info->card; - - if (!cy_is_Z(card)) { - u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO; - return put_user(tmp, value); - } - return 0; -} /* get_threshold */ - -static int set_timeout(struct cyclades_port *info, unsigned long value) -{ - struct cyclades_card *card = info->card; - unsigned long flags; - - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_writeb(info, CyRTPR, value & 0xff); - spin_unlock_irqrestore(&card->card_lock, flags); - } - return 0; -} /* set_timeout */ - -static int get_timeout(struct cyclades_port *info, - unsigned long __user *value) -{ - struct cyclades_card *card = info->card; - - if (!cy_is_Z(card)) { - u8 tmp = cyy_readb(info, CyRTPR); - return put_user(tmp, value); - } - return 0; -} /* get_timeout */ - -static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg, - struct cyclades_icount *cprev) -{ - struct cyclades_icount cnow; - unsigned long flags; - int ret; - - spin_lock_irqsave(&info->card->card_lock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->card->card_lock, flags); - - ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); - - *cprev = cnow; - - return ret; -} - -/* - * This routine allows the tty driver to implement device- - * specific ioctl's. If the ioctl number passed in cmd is - * not recognized by the driver, it should return ENOIOCTLCMD. - */ -static int -cy_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_icount cnow; /* kernel counter temps */ - int ret_val = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; - - if (serial_paranoia_check(info, tty->name, "cy_ioctl")) - return -ENODEV; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", - info->line, cmd, arg); -#endif - - switch (cmd) { - case CYGETMON: - if (copy_to_user(argp, &info->mon, sizeof(info->mon))) { - ret_val = -EFAULT; - break; - } - memset(&info->mon, 0, sizeof(info->mon)); - break; - case CYGETTHRESH: - ret_val = get_threshold(info, argp); - break; - case CYSETTHRESH: - ret_val = set_threshold(info, arg); - break; - case CYGETDEFTHRESH: - ret_val = put_user(info->default_threshold, - (unsigned long __user *)argp); - break; - case CYSETDEFTHRESH: - info->default_threshold = arg & 0x0f; - break; - case CYGETTIMEOUT: - ret_val = get_timeout(info, argp); - break; - case CYSETTIMEOUT: - ret_val = set_timeout(info, arg); - break; - case CYGETDEFTIMEOUT: - ret_val = put_user(info->default_timeout, - (unsigned long __user *)argp); - break; - case CYSETDEFTIMEOUT: - info->default_timeout = arg & 0xff; - break; - case CYSETRFLOW: - info->rflow = (int)arg; - break; - case CYGETRFLOW: - ret_val = info->rflow; - break; - case CYSETRTSDTR_INV: - info->rtsdtr_inv = (int)arg; - break; - case CYGETRTSDTR_INV: - ret_val = info->rtsdtr_inv; - break; - case CYGETCD1400VER: - ret_val = info->chip_rev; - break; -#ifndef CONFIG_CYZ_INTR - case CYZSETPOLLCYCLE: - cyz_polling_cycle = (arg * HZ) / 1000; - break; - case CYZGETPOLLCYCLE: - ret_val = (cyz_polling_cycle * 1000) / HZ; - break; -#endif /* CONFIG_CYZ_INTR */ - case CYSETWAIT: - info->port.closing_wait = (unsigned short)arg * HZ / 100; - break; - case CYGETWAIT: - ret_val = info->port.closing_wait / (HZ / 100); - break; - case TIOCGSERIAL: - ret_val = cy_get_serial_info(info, argp); - break; - case TIOCSSERIAL: - ret_val = cy_set_serial_info(info, tty, argp); - break; - case TIOCSERGETLSR: /* Get line status register */ - ret_val = get_lsr_info(info, argp); - break; - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - spin_lock_irqsave(&info->card->card_lock, flags); - /* note the counters on entry */ - cnow = info->icount; - spin_unlock_irqrestore(&info->card->card_lock, flags); - ret_val = wait_event_interruptible(info->port.delta_msr_wait, - cy_cflags_changed(info, arg, &cnow)); - break; - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - default: - ret_val = -ENOIOCTLCMD; - } - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_ioctl done\n"); -#endif - return ret_val; -} /* cy_ioctl */ - -static int cy_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *sic) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_icount cnow; /* Used to snapshot */ - unsigned long flags; - - spin_lock_irqsave(&info->card->card_lock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->card->card_lock, flags); - - sic->cts = cnow.cts; - sic->dsr = cnow.dsr; - sic->rng = cnow.rng; - sic->dcd = cnow.dcd; - sic->rx = cnow.rx; - sic->tx = cnow.tx; - sic->frame = cnow.frame; - sic->overrun = cnow.overrun; - sic->parity = cnow.parity; - sic->brk = cnow.brk; - sic->buf_overrun = cnow.buf_overrun; - return 0; -} - -/* - * This routine allows the tty driver to be notified when - * device's termios settings have changed. Note that a - * well-designed tty driver should be prepared to accept the case - * where old == NULL, and try to do something rational. - */ -static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line); -#endif - - cy_set_line_char(info, tty); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - cy_start(tty); - } -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->port.open_wait); -#endif -} /* cy_set_termios */ - -/* This function is used to send a high-priority XON/XOFF character to - the device. -*/ -static void cy_send_xchar(struct tty_struct *tty, char ch) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - int channel; - - if (serial_paranoia_check(info, tty->name, "cy_send_xchar")) - return; - - info->x_char = ch; - - if (ch) - cy_start(tty); - - card = info->card; - channel = info->line - card->first_line; - - if (cy_is_Z(card)) { - if (ch == STOP_CHAR(tty)) - cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); - else if (ch == START_CHAR(tty)) - cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L); - } -} - -/* This routine is called by the upper-layer tty layer to signal - that incoming characters should be throttled because the input - buffers are close to full. - */ -static void cy_throttle(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - unsigned long flags; - -#ifdef CY_DEBUG_THROTTLE - char buf[64]; - - printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty), info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_throttle")) - return; - - card = info->card; - - if (I_IXOFF(tty)) { - if (!cy_is_Z(card)) - cy_send_xchar(tty, STOP_CHAR(tty)); - else - info->throttle = 1; - } - - if (tty->termios->c_cflag & CRTSCTS) { - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_change_rts_dtr(info, 0, TIOCM_RTS); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { - info->throttle = 1; - } - } -} /* cy_throttle */ - -/* - * This routine notifies the tty driver that it should signal - * that characters can now be sent to the tty without fear of - * overrunning the input buffers of the line disciplines. - */ -static void cy_unthrottle(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - struct cyclades_card *card; - unsigned long flags; - -#ifdef CY_DEBUG_THROTTLE - char buf[64]; - - printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n", - tty_name(tty, buf), tty_chars_in_buffer(tty), info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - cy_send_xchar(tty, START_CHAR(tty)); - } - - if (tty->termios->c_cflag & CRTSCTS) { - card = info->card; - if (!cy_is_Z(card)) { - spin_lock_irqsave(&card->card_lock, flags); - cyy_change_rts_dtr(info, TIOCM_RTS, 0); - spin_unlock_irqrestore(&card->card_lock, flags); - } else { - info->throttle = 0; - } - } -} /* cy_unthrottle */ - -/* cy_start and cy_stop provide software output flow control as a - function of XON/XOFF, software CTS, and other such stuff. -*/ -static void cy_stop(struct tty_struct *tty) -{ - struct cyclades_card *cinfo; - struct cyclades_port *info = tty->driver_data; - int channel; - unsigned long flags; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_stop")) - return; - - cinfo = info->card; - channel = info->line - cinfo->first_line; - if (!cy_is_Z(cinfo)) { - spin_lock_irqsave(&cinfo->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy); - spin_unlock_irqrestore(&cinfo->card_lock, flags); - } -} /* cy_stop */ - -static void cy_start(struct tty_struct *tty) -{ - struct cyclades_card *cinfo; - struct cyclades_port *info = tty->driver_data; - int channel; - unsigned long flags; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_start")) - return; - - cinfo = info->card; - channel = info->line - cinfo->first_line; - if (!cy_is_Z(cinfo)) { - spin_lock_irqsave(&cinfo->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy); - spin_unlock_irqrestore(&cinfo->card_lock, flags); - } -} /* cy_start */ - -/* - * cy_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void cy_hangup(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef CY_DEBUG_OTHER - printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_hangup")) - return; - - cy_flush_buffer(tty); - cy_shutdown(info, tty); - tty_port_hangup(&info->port); -} /* cy_hangup */ - -static int cyy_carrier_raised(struct tty_port *port) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - struct cyclades_card *cinfo = info->card; - unsigned long flags; - int channel = info->line - cinfo->first_line; - u32 cd; - - spin_lock_irqsave(&cinfo->card_lock, flags); - cyy_writeb(info, CyCAR, channel & 0x03); - cd = cyy_readb(info, CyMSVR1) & CyDCD; - spin_unlock_irqrestore(&cinfo->card_lock, flags); - - return cd; -} - -static void cyy_dtr_rts(struct tty_port *port, int raise) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - struct cyclades_card *cinfo = info->card; - unsigned long flags; - - spin_lock_irqsave(&cinfo->card_lock, flags); - cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0, - raise ? 0 : TIOCM_RTS | TIOCM_DTR); - spin_unlock_irqrestore(&cinfo->card_lock, flags); -} - -static int cyz_carrier_raised(struct tty_port *port) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - - return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD; -} - -static void cyz_dtr_rts(struct tty_port *port, int raise) -{ - struct cyclades_port *info = container_of(port, struct cyclades_port, - port); - struct cyclades_card *cinfo = info->card; - struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; - int ret, channel = info->line - cinfo->first_line; - u32 rs; - - rs = readl(&ch_ctrl->rs_control); - if (raise) - rs |= C_RS_RTS | C_RS_DTR; - else - rs &= ~(C_RS_RTS | C_RS_DTR); - cy_writel(&ch_ctrl->rs_control, rs); - ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L); - if (ret != 0) - printk(KERN_ERR "%s: retval on ttyC%d was %x\n", - __func__, info->line, ret); -#ifdef CY_DEBUG_DTR - printk(KERN_DEBUG "%s: raising Z DTR\n", __func__); -#endif -} - -static const struct tty_port_operations cyy_port_ops = { - .carrier_raised = cyy_carrier_raised, - .dtr_rts = cyy_dtr_rts, - .shutdown = cy_do_close, -}; - -static const struct tty_port_operations cyz_port_ops = { - .carrier_raised = cyz_carrier_raised, - .dtr_rts = cyz_dtr_rts, - .shutdown = cy_do_close, -}; - -/* - * --------------------------------------------------------------------- - * cy_init() and friends - * - * cy_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -static int __devinit cy_init_card(struct cyclades_card *cinfo) -{ - struct cyclades_port *info; - unsigned int channel, port; - - spin_lock_init(&cinfo->card_lock); - cinfo->intr_enabled = 0; - - cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports), - GFP_KERNEL); - if (cinfo->ports == NULL) { - printk(KERN_ERR "Cyclades: cannot allocate ports\n"); - return -ENOMEM; - } - - for (channel = 0, port = cinfo->first_line; channel < cinfo->nports; - channel++, port++) { - info = &cinfo->ports[channel]; - tty_port_init(&info->port); - info->magic = CYCLADES_MAGIC; - info->card = cinfo; - info->line = port; - - info->port.closing_wait = CLOSING_WAIT_DELAY; - info->port.close_delay = 5 * HZ / 10; - info->port.flags = STD_COM_FLAGS; - init_completion(&info->shutdown_wait); - - if (cy_is_Z(cinfo)) { - struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS; - struct ZFW_CTRL *zfw_ctrl; - - info->port.ops = &cyz_port_ops; - info->type = PORT_STARTECH; - - zfw_ctrl = cinfo->base_addr + - (readl(&firm_id->zfwctrl_addr) & 0xfffff); - info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel]; - info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; - - if (cinfo->hw_ver == ZO_V1) - info->xmit_fifo_size = CYZ_FIFO_SIZE; - else - info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; -#ifdef CONFIG_CYZ_INTR - setup_timer(&cyz_rx_full_timer[port], - cyz_rx_restart, (unsigned long)info); -#endif - } else { - unsigned short chip_number; - int index = cinfo->bus_index; - - info->port.ops = &cyy_port_ops; - info->type = PORT_CIRRUS; - info->xmit_fifo_size = CyMAX_CHAR_FIFO; - info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; - info->cor2 = CyETC; - info->cor3 = 0x08; /* _very_ small rcv threshold */ - - chip_number = channel / CyPORTS_PER_CHIP; - info->u.cyy.base_addr = cinfo->base_addr + - (cy_chip_offset[chip_number] << index); - info->chip_rev = cyy_readb(info, CyGFRCR); - - if (info->chip_rev >= CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - info->tbpr = baud_bpr_60[13]; /* Tx BPR */ - info->tco = baud_co_60[13]; /* Tx CO */ - info->rbpr = baud_bpr_60[13]; /* Rx BPR */ - info->rco = baud_co_60[13]; /* Rx CO */ - info->rtsdtr_inv = 1; - } else { - info->tbpr = baud_bpr_25[13]; /* Tx BPR */ - info->tco = baud_co_25[13]; /* Tx CO */ - info->rbpr = baud_bpr_25[13]; /* Rx BPR */ - info->rco = baud_co_25[13]; /* Rx CO */ - info->rtsdtr_inv = 0; - } - info->read_status_mask = CyTIMEOUT | CySPECHAR | - CyBREAK | CyPARITY | CyFRAME | CyOVERRUN; - } - - } - -#ifndef CONFIG_CYZ_INTR - if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) { - mod_timer(&cyz_timerlist, jiffies + 1); -#ifdef CY_PCI_DEBUG - printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); -#endif - } -#endif - return 0; -} - -/* initialize chips on Cyclom-Y card -- return number of valid - chips (which is number of ports/4) */ -static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr, - int index) -{ - unsigned int chip_number; - void __iomem *base_addr; - - cy_writeb(true_base_addr + (Cy_HwReset << index), 0); - /* Cy_HwReset is 0x1400 */ - cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0); - /* Cy_ClrIntr is 0x1800 */ - udelay(500L); - - for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; - chip_number++) { - base_addr = - true_base_addr + (cy_chip_offset[chip_number] << index); - mdelay(1); - if (readb(base_addr + (CyCCR << index)) != 0x00) { - /************* - printk(" chip #%d at %#6lx is never idle (CCR != 0)\n", - chip_number, (unsigned long)base_addr); - *************/ - return chip_number; - } - - cy_writeb(base_addr + (CyGFRCR << index), 0); - udelay(10L); - - /* The Cyclom-16Y does not decode address bit 9 and therefore - cannot distinguish between references to chip 0 and a non- - existent chip 4. If the preceding clearing of the supposed - chip 4 GFRCR register appears at chip 0, there is no chip 4 - and this must be a Cyclom-16Y, not a Cyclom-32Ye. - */ - if (chip_number == 4 && readb(true_base_addr + - (cy_chip_offset[0] << index) + - (CyGFRCR << index)) == 0) { - return chip_number; - } - - cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET); - mdelay(1); - - if (readb(base_addr + (CyGFRCR << index)) == 0x00) { - /* - printk(" chip #%d at %#6lx is not responding ", - chip_number, (unsigned long)base_addr); - printk("(GFRCR stayed 0)\n", - */ - return chip_number; - } - if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) != - 0x40) { - /* - printk(" chip #%d at %#6lx is not valid (GFRCR == " - "%#2x)\n", - chip_number, (unsigned long)base_addr, - base_addr[CyGFRCR<= CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - /* Impossible to reach 5ms with this chip. - Changed to 2ms instead (f = 500 Hz). */ - cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS); - } else { - /* f = 200 Hz */ - cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS); - } - - /* - printk(" chip #%d at %#6lx is rev 0x%2x\n", - chip_number, (unsigned long)base_addr, - readb(base_addr+(CyGFRCR< NR_PORTS) { - printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " - "more channels are available. Change NR_PORTS " - "in cyclades.c and recompile kernel.\n", - (unsigned long)cy_isa_address); - iounmap(cy_isa_address); - return nboard; - } - /* fill the next cy_card structure available */ - for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == NULL) - break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " - "more cards can be used. Change NR_CARDS in " - "cyclades.c and recompile kernel.\n", - (unsigned long)cy_isa_address); - iounmap(cy_isa_address); - return nboard; - } - - /* allocate IRQ */ - if (request_irq(cy_isa_irq, cyy_interrupt, - IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) { - printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " - "could not allocate IRQ#%d.\n", - (unsigned long)cy_isa_address, cy_isa_irq); - iounmap(cy_isa_address); - return nboard; - } - - /* set cy_card */ - cy_card[j].base_addr = cy_isa_address; - cy_card[j].ctl_addr.p9050 = NULL; - cy_card[j].irq = (int)cy_isa_irq; - cy_card[j].bus_index = 0; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; - cy_card[j].nports = cy_isa_nchan; - if (cy_init_card(&cy_card[j])) { - cy_card[j].base_addr = NULL; - free_irq(cy_isa_irq, &cy_card[j]); - iounmap(cy_isa_address); - continue; - } - nboard++; - - printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " - "%d channels starting from port %d\n", - j + 1, (unsigned long)cy_isa_address, - (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), - cy_isa_irq, cy_isa_nchan, cy_next_channel); - - for (j = cy_next_channel; - j < cy_next_channel + cy_isa_nchan; j++) - tty_register_device(cy_serial_driver, j, NULL); - cy_next_channel += cy_isa_nchan; - } - return nboard; -#else - return 0; -#endif /* CONFIG_ISA */ -} /* cy_detect_isa */ - -#ifdef CONFIG_PCI -static inline int __devinit cyc_isfwstr(const char *str, unsigned int size) -{ - unsigned int a; - - for (a = 0; a < size && *str; a++, str++) - if (*str & 0x80) - return -EINVAL; - - for (; a < size; a++, str++) - if (*str) - return -EINVAL; - - return 0; -} - -static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data, - unsigned int size) -{ - for (; size > 0; size--) { - cy_writel(fpga, *data++); - udelay(10); - } -} - -static void __devinit plx_init(struct pci_dev *pdev, int irq, - struct RUNTIME_9060 __iomem *addr) -{ - /* Reset PLX */ - cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000); - udelay(100L); - cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000); - - /* Reload Config. Registers from EEPROM */ - cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000); - udelay(100L); - cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000); - - /* For some yet unknown reason, once the PLX9060 reloads the EEPROM, - * the IRQ is lost and, thus, we have to re-write it to the PCI config. - * registers. This will remain here until we find a permanent fix. - */ - pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); -} - -static int __devinit __cyz_load_fw(const struct firmware *fw, - const char *name, const u32 mailbox, void __iomem *base, - void __iomem *fpga) -{ - const void *ptr = fw->data; - const struct zfile_header *h = ptr; - const struct zfile_config *c, *cs; - const struct zfile_block *b, *bs; - unsigned int a, tmp, len = fw->size; -#define BAD_FW KERN_ERR "Bad firmware: " - if (len < sizeof(*h)) { - printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h)); - return -EINVAL; - } - - cs = ptr + h->config_offset; - bs = ptr + h->block_offset; - - if ((void *)(cs + h->n_config) > ptr + len || - (void *)(bs + h->n_blocks) > ptr + len) { - printk(BAD_FW "too short"); - return -EINVAL; - } - - if (cyc_isfwstr(h->name, sizeof(h->name)) || - cyc_isfwstr(h->date, sizeof(h->date))) { - printk(BAD_FW "bad formatted header string\n"); - return -EINVAL; - } - - if (strncmp(name, h->name, sizeof(h->name))) { - printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name); - return -EINVAL; - } - - tmp = 0; - for (c = cs; c < cs + h->n_config; c++) { - for (a = 0; a < c->n_blocks; a++) - if (c->block_list[a] > h->n_blocks) { - printk(BAD_FW "bad block ref number in cfgs\n"); - return -EINVAL; - } - if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */ - tmp++; - } - if (!tmp) { - printk(BAD_FW "nothing appropriate\n"); - return -EINVAL; - } - - for (b = bs; b < bs + h->n_blocks; b++) - if (b->file_offset + b->size > len) { - printk(BAD_FW "bad block data offset\n"); - return -EINVAL; - } - - /* everything is OK, let's seek'n'load it */ - for (c = cs; c < cs + h->n_config; c++) - if (c->mailbox == mailbox && c->function == 0) - break; - - for (a = 0; a < c->n_blocks; a++) { - b = &bs[c->block_list[a]]; - if (b->type == ZBLOCK_FPGA) { - if (fpga != NULL) - cyz_fpga_copy(fpga, ptr + b->file_offset, - b->size); - } else { - if (base != NULL) - memcpy_toio(base + b->ram_offset, - ptr + b->file_offset, b->size); - } - } -#undef BAD_FW - return 0; -} - -static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, - struct RUNTIME_9060 __iomem *ctl_addr, int irq) -{ - const struct firmware *fw; - struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS; - struct CUSTOM_REG __iomem *cust = base_addr; - struct ZFW_CTRL __iomem *pt_zfwctrl; - void __iomem *tmp; - u32 mailbox, status, nchan; - unsigned int i; - int retval; - - retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev); - if (retval) { - dev_err(&pdev->dev, "can't get firmware\n"); - goto err; - } - - /* Check whether the firmware is already loaded and running. If - positive, skip this board */ - if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { - u32 cntval = readl(base_addr + 0x190); - - udelay(100); - if (cntval != readl(base_addr + 0x190)) { - /* FW counter is working, FW is running */ - dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. " - "Skipping board.\n"); - retval = 0; - goto err_rel; - } - } - - /* start boot */ - cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) & - ~0x00030800UL); - - mailbox = readl(&ctl_addr->mail_box_0); - - if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) { - /* stops CPU and set window to beginning of RAM */ - cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); - cy_writel(&cust->cpu_stop, 0); - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - udelay(100); - } - - plx_init(pdev, irq, ctl_addr); - - if (mailbox != 0) { - /* load FPGA */ - retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL, - base_addr); - if (retval) - goto err_rel; - if (!__cyz_fpga_loaded(ctl_addr)) { - dev_err(&pdev->dev, "fw upload successful, but fw is " - "not loaded\n"); - goto err_rel; - } - } - - /* stops CPU and set window to beginning of RAM */ - cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); - cy_writel(&cust->cpu_stop, 0); - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - udelay(100); - - /* clear memory */ - for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) - cy_writeb(tmp, 255); - if (mailbox != 0) { - /* set window to last 512K of RAM */ - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE); - for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) - cy_writeb(tmp, 255); - /* set window to beginning of RAM */ - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - } - - retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL); - release_firmware(fw); - if (retval) - goto err; - - /* finish boot and start boards */ - cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); - cy_writel(&cust->cpu_start, 0); - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - i = 0; - while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40) - msleep(100); - if (status != ZFIRM_ID) { - if (status == ZFIRM_HLT) { - dev_err(&pdev->dev, "you need an external power supply " - "for this number of ports. Firmware halted and " - "board reset.\n"); - retval = -EIO; - goto err; - } - dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting " - "some more time\n", status); - while ((status = readl(&fid->signature)) != ZFIRM_ID && - i++ < 200) - msleep(100); - if (status != ZFIRM_ID) { - dev_err(&pdev->dev, "Board not started in 20 seconds! " - "Giving up. (fid->signature = 0x%x)\n", - status); - dev_info(&pdev->dev, "*** Warning ***: if you are " - "upgrading the FW, please power cycle the " - "system before loading the new FW to the " - "Cyclades-Z.\n"); - - if (__cyz_fpga_loaded(ctl_addr)) - plx_init(pdev, irq, ctl_addr); - - retval = -EIO; - goto err; - } - dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n", - i / 10); - } - pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr); - - dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n", - base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr), - base_addr + readl(&fid->zfwctrl_addr)); - - nchan = readl(&pt_zfwctrl->board_ctrl.n_channel); - dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n", - readl(&pt_zfwctrl->board_ctrl.fw_version), nchan); - - if (nchan == 0) { - dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please " - "check the connection between the Z host card and the " - "serial expanders.\n"); - - if (__cyz_fpga_loaded(ctl_addr)) - plx_init(pdev, irq, ctl_addr); - - dev_info(&pdev->dev, "Null number of ports detected. Board " - "reset.\n"); - retval = 0; - goto err; - } - - cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX); - cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION); - - /* - Early firmware failed to start looking for commands. - This enables firmware interrupts for those commands. - */ - cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | - (1 << 17)); - cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | - 0x00030800UL); - - return nchan; -err_rel: - release_firmware(fw); -err: - return retval; -} - -static int __devinit cy_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - void __iomem *addr0 = NULL, *addr2 = NULL; - char *card_name = NULL; - u32 uninitialized_var(mailbox); - unsigned int device_id, nchan = 0, card_no, i; - unsigned char plx_ver; - int retval, irq; - - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "cannot enable device\n"); - goto err; - } - - /* read PCI configuration area */ - irq = pdev->irq; - device_id = pdev->device & ~PCI_DEVICE_ID_MASK; - -#if defined(__alpha__) - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ - dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low " - "addresses on Alpha systems.\n"); - retval = -EIO; - goto err_dis; - } -#endif - if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { - dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low " - "addresses\n"); - retval = -EIO; - goto err_dis; - } - - if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { - dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring " - "it...\n"); - pdev->resource[2].flags &= ~IORESOURCE_IO; - } - - retval = pci_request_regions(pdev, "cyclades"); - if (retval) { - dev_err(&pdev->dev, "failed to reserve resources\n"); - goto err_dis; - } - - retval = -EIO; - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || - device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { - card_name = "Cyclom-Y"; - - addr0 = ioremap_nocache(pci_resource_start(pdev, 0), - CyPCI_Yctl); - if (addr0 == NULL) { - dev_err(&pdev->dev, "can't remap ctl region\n"); - goto err_reg; - } - addr2 = ioremap_nocache(pci_resource_start(pdev, 2), - CyPCI_Ywin); - if (addr2 == NULL) { - dev_err(&pdev->dev, "can't remap base region\n"); - goto err_unmap; - } - - nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1); - if (nchan == 0) { - dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " - "Serial-Modules\n"); - goto err_unmap; - } - } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { - struct RUNTIME_9060 __iomem *ctl_addr; - - ctl_addr = addr0 = ioremap_nocache(pci_resource_start(pdev, 0), - CyPCI_Zctl); - if (addr0 == NULL) { - dev_err(&pdev->dev, "can't remap ctl region\n"); - goto err_reg; - } - - /* Disable interrupts on the PLX before resetting it */ - cy_writew(&ctl_addr->intr_ctrl_stat, - readw(&ctl_addr->intr_ctrl_stat) & ~0x0900); - - plx_init(pdev, irq, addr0); - - mailbox = readl(&ctl_addr->mail_box_0); - - addr2 = ioremap_nocache(pci_resource_start(pdev, 2), - mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin); - if (addr2 == NULL) { - dev_err(&pdev->dev, "can't remap base region\n"); - goto err_unmap; - } - - if (mailbox == ZE_V1) { - card_name = "Cyclades-Ze"; - } else { - card_name = "Cyclades-8Zo"; -#ifdef CY_PCI_DEBUG - if (mailbox == ZO_V1) { - cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); - dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA " - "id %lx, ver %lx\n", (ulong)(0xff & - readl(&((struct CUSTOM_REG *)addr2)-> - fpga_id)), (ulong)(0xff & - readl(&((struct CUSTOM_REG *)addr2)-> - fpga_version))); - cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - } else { - dev_info(&pdev->dev, "Cyclades-Z/PCI: New " - "Cyclades-Z board. FPGA not loaded\n"); - } -#endif - /* The following clears the firmware id word. This - ensures that the driver will not attempt to talk to - the board until it has been properly initialized. - */ - if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) - cy_writel(addr2 + ID_ADDRESS, 0L); - } - - retval = cyz_load_fw(pdev, addr2, addr0, irq); - if (retval <= 0) - goto err_unmap; - nchan = retval; - } - - if ((cy_next_channel + nchan) > NR_PORTS) { - dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " - "channels are available. Change NR_PORTS in " - "cyclades.c and recompile kernel.\n"); - goto err_unmap; - } - /* fill the next cy_card structure available */ - for (card_no = 0; card_no < NR_CARDS; card_no++) { - if (cy_card[card_no].base_addr == NULL) - break; - } - if (card_no == NR_CARDS) { /* no more cy_cards available */ - dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " - "more cards can be used. Change NR_CARDS in " - "cyclades.c and recompile kernel.\n"); - goto err_unmap; - } - - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || - device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { - /* allocate IRQ */ - retval = request_irq(irq, cyy_interrupt, - IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]); - if (retval) { - dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto err_unmap; - } - cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP; - } else { - struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS; - struct ZFW_CTRL __iomem *zfw_ctrl; - - zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - - cy_card[card_no].hw_ver = mailbox; - cy_card[card_no].num_chips = (unsigned int)-1; - cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl; -#ifdef CONFIG_CYZ_INTR - /* allocate IRQ only if board has an IRQ */ - if (irq != 0 && irq != 255) { - retval = request_irq(irq, cyz_interrupt, - IRQF_SHARED, "Cyclades-Z", - &cy_card[card_no]); - if (retval) { - dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto err_unmap; - } - } -#endif /* CONFIG_CYZ_INTR */ - } - - /* set cy_card */ - cy_card[card_no].base_addr = addr2; - cy_card[card_no].ctl_addr.p9050 = addr0; - cy_card[card_no].irq = irq; - cy_card[card_no].bus_index = 1; - cy_card[card_no].first_line = cy_next_channel; - cy_card[card_no].nports = nchan; - retval = cy_init_card(&cy_card[card_no]); - if (retval) - goto err_null; - - pci_set_drvdata(pdev, &cy_card[card_no]); - - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || - device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { - /* enable interrupts in the PCI interface */ - plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; - switch (plx_ver) { - case PLX_9050: - cy_writeb(addr0 + 0x4c, 0x43); - break; - - case PLX_9060: - case PLX_9080: - default: /* Old boards, use PLX_9060 */ - { - struct RUNTIME_9060 __iomem *ctl_addr = addr0; - plx_init(pdev, irq, ctl_addr); - cy_writew(&ctl_addr->intr_ctrl_stat, - readw(&ctl_addr->intr_ctrl_stat) | 0x0900); - break; - } - } - } - - dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " - "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); - for (i = cy_next_channel; i < cy_next_channel + nchan; i++) - tty_register_device(cy_serial_driver, i, &pdev->dev); - cy_next_channel += nchan; - - return 0; -err_null: - cy_card[card_no].base_addr = NULL; - free_irq(irq, &cy_card[card_no]); -err_unmap: - iounmap(addr0); - if (addr2) - iounmap(addr2); -err_reg: - pci_release_regions(pdev); -err_dis: - pci_disable_device(pdev); -err: - return retval; -} - -static void __devexit cy_pci_remove(struct pci_dev *pdev) -{ - struct cyclades_card *cinfo = pci_get_drvdata(pdev); - unsigned int i; - - /* non-Z with old PLX */ - if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == - PLX_9050) - cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); - else -#ifndef CONFIG_CYZ_INTR - if (!cy_is_Z(cinfo)) -#endif - cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, - readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & - ~0x0900); - - iounmap(cinfo->base_addr); - if (cinfo->ctl_addr.p9050) - iounmap(cinfo->ctl_addr.p9050); - if (cinfo->irq -#ifndef CONFIG_CYZ_INTR - && !cy_is_Z(cinfo) -#endif /* CONFIG_CYZ_INTR */ - ) - free_irq(cinfo->irq, cinfo); - pci_release_regions(pdev); - - cinfo->base_addr = NULL; - for (i = cinfo->first_line; i < cinfo->first_line + - cinfo->nports; i++) - tty_unregister_device(cy_serial_driver, i); - cinfo->nports = 0; - kfree(cinfo->ports); -} - -static struct pci_driver cy_pci_driver = { - .name = "cyclades", - .id_table = cy_pci_dev_id, - .probe = cy_pci_probe, - .remove = __devexit_p(cy_pci_remove) -}; -#endif - -static int cyclades_proc_show(struct seq_file *m, void *v) -{ - struct cyclades_port *info; - unsigned int i, j; - __u32 cur_jifs = jiffies; - - seq_puts(m, "Dev TimeOpen BytesOut IdleOut BytesIn " - "IdleIn Overruns Ldisc\n"); - - /* Output one line for each known port */ - for (i = 0; i < NR_CARDS; i++) - for (j = 0; j < cy_card[i].nports; j++) { - info = &cy_card[i].ports[j]; - - if (info->port.count) { - /* XXX is the ldisc num worth this? */ - struct tty_struct *tty; - struct tty_ldisc *ld; - int num = 0; - tty = tty_port_tty_get(&info->port); - if (tty) { - ld = tty_ldisc_ref(tty); - if (ld) { - num = ld->ops->num; - tty_ldisc_deref(ld); - } - tty_kref_put(tty); - } - seq_printf(m, "%3d %8lu %10lu %8lu " - "%10lu %8lu %9lu %6d\n", info->line, - (cur_jifs - info->idle_stats.in_use) / - HZ, info->idle_stats.xmit_bytes, - (cur_jifs - info->idle_stats.xmit_idle)/ - HZ, info->idle_stats.recv_bytes, - (cur_jifs - info->idle_stats.recv_idle)/ - HZ, info->idle_stats.overruns, - num); - } else - seq_printf(m, "%3d %8lu %10lu %8lu " - "%10lu %8lu %9lu %6ld\n", - info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); - } - return 0; -} - -static int cyclades_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, cyclades_proc_show, NULL); -} - -static const struct file_operations cyclades_proc_fops = { - .owner = THIS_MODULE, - .open = cyclades_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* The serial driver boot-time initialization code! - Hardware I/O ports are mapped to character special devices on a - first found, first allocated manner. That is, this code searches - for Cyclom cards in the system. As each is found, it is probed - to discover how many chips (and thus how many ports) are present. - These ports are mapped to the tty ports 32 and upward in monotonic - fashion. If an 8-port card is replaced with a 16-port card, the - port mapping on a following card will shift. - - This approach is different from what is used in the other serial - device driver because the Cyclom is more properly a multiplexer, - not just an aggregation of serial ports on one card. - - If there are more cards with more ports than have been - statically allocated above, a warning is printed and the - extra ports are ignored. - */ - -static const struct tty_operations cy_ops = { - .open = cy_open, - .close = cy_close, - .write = cy_write, - .put_char = cy_put_char, - .flush_chars = cy_flush_chars, - .write_room = cy_write_room, - .chars_in_buffer = cy_chars_in_buffer, - .flush_buffer = cy_flush_buffer, - .ioctl = cy_ioctl, - .throttle = cy_throttle, - .unthrottle = cy_unthrottle, - .set_termios = cy_set_termios, - .stop = cy_stop, - .start = cy_start, - .hangup = cy_hangup, - .break_ctl = cy_break, - .wait_until_sent = cy_wait_until_sent, - .tiocmget = cy_tiocmget, - .tiocmset = cy_tiocmset, - .get_icount = cy_get_icount, - .proc_fops = &cyclades_proc_fops, -}; - -static int __init cy_init(void) -{ - unsigned int nboards; - int retval = -ENOMEM; - - cy_serial_driver = alloc_tty_driver(NR_PORTS); - if (!cy_serial_driver) - goto err; - - printk(KERN_INFO "Cyclades driver " CY_VERSION " (built %s %s)\n", - __DATE__, __TIME__); - - /* Initialize the tty_driver structure */ - - cy_serial_driver->owner = THIS_MODULE; - cy_serial_driver->driver_name = "cyclades"; - cy_serial_driver->name = "ttyC"; - cy_serial_driver->major = CYCLADES_MAJOR; - cy_serial_driver->minor_start = 0; - cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; - cy_serial_driver->init_termios = tty_std_termios; - cy_serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(cy_serial_driver, &cy_ops); - - retval = tty_register_driver(cy_serial_driver); - if (retval) { - printk(KERN_ERR "Couldn't register Cyclades serial driver\n"); - goto err_frtty; - } - - /* the code below is responsible to find the boards. Each different - type of board has its own detection routine. If a board is found, - the next cy_card structure available is set by the detection - routine. These functions are responsible for checking the - availability of cy_card and cy_port data structures and updating - the cy_next_channel. */ - - /* look for isa boards */ - nboards = cy_detect_isa(); - -#ifdef CONFIG_PCI - /* look for pci boards */ - retval = pci_register_driver(&cy_pci_driver); - if (retval && !nboards) { - tty_unregister_driver(cy_serial_driver); - goto err_frtty; - } -#endif - - return 0; -err_frtty: - put_tty_driver(cy_serial_driver); -err: - return retval; -} /* cy_init */ - -static void __exit cy_cleanup_module(void) -{ - struct cyclades_card *card; - unsigned int i, e1; - -#ifndef CONFIG_CYZ_INTR - del_timer_sync(&cyz_timerlist); -#endif /* CONFIG_CYZ_INTR */ - - e1 = tty_unregister_driver(cy_serial_driver); - if (e1) - printk(KERN_ERR "failed to unregister Cyclades serial " - "driver(%d)\n", e1); - -#ifdef CONFIG_PCI - pci_unregister_driver(&cy_pci_driver); -#endif - - for (i = 0; i < NR_CARDS; i++) { - card = &cy_card[i]; - if (card->base_addr) { - /* clear interrupt */ - cy_writeb(card->base_addr + Cy_ClrIntr, 0); - iounmap(card->base_addr); - if (card->ctl_addr.p9050) - iounmap(card->ctl_addr.p9050); - if (card->irq -#ifndef CONFIG_CYZ_INTR - && !cy_is_Z(card) -#endif /* CONFIG_CYZ_INTR */ - ) - free_irq(card->irq, card); - for (e1 = card->first_line; e1 < card->first_line + - card->nports; e1++) - tty_unregister_device(cy_serial_driver, e1); - kfree(card->ports); - } - } - - put_tty_driver(cy_serial_driver); -} /* cy_cleanup_module */ - -module_init(cy_init); -module_exit(cy_cleanup_module); - -MODULE_LICENSE("GPL"); -MODULE_VERSION(CY_VERSION); -MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR); -MODULE_FIRMWARE("cyzfirm.bin"); diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c deleted file mode 100644 index db1cf9c328d8..000000000000 --- a/drivers/char/isicom.c +++ /dev/null @@ -1,1736 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Original driver code supplied by Multi-Tech - * - * Changes - * 1/9/98 alan@lxorguk.ukuu.org.uk - * Merge to 2.0.x kernel tree - * Obtain and use official major/minors - * Loader switched to a misc device - * (fixed range check bug as a side effect) - * Printk clean up - * 9/12/98 alan@lxorguk.ukuu.org.uk - * Rough port to 2.1.x - * - * 10/6/99 sameer Merged the ISA and PCI drivers to - * a new unified driver. - * - * 3/9/99 sameer Added support for ISI4616 cards. - * - * 16/9/99 sameer We do not force RTS low anymore. - * This is to prevent the firmware - * from getting confused. - * - * 26/10/99 sameer Cosmetic changes:The driver now - * dumps the Port Count information - * along with I/O address and IRQ. - * - * 13/12/99 sameer Fixed the problem with IRQ sharing. - * - * 10/5/00 sameer Fixed isicom_shutdown_board() - * to not lower DTR on all the ports - * when the last port on the card is - * closed. - * - * 10/5/00 sameer Signal mask setup command added - * to isicom_setup_port and - * isicom_shutdown_port. - * - * 24/5/00 sameer The driver is now SMP aware. - * - * - * 27/11/00 Vinayak P Risbud Fixed the Driver Crash Problem - * - * - * 03/01/01 anil .s Added support for resetting the - * internal modems on ISI cards. - * - * 08/02/01 anil .s Upgraded the driver for kernel - * 2.4.x - * - * 11/04/01 Kevin Fixed firmware load problem with - * ISIHP-4X card - * - * 30/04/01 anil .s Fixed the remote login through - * ISI port problem. Now the link - * does not go down before password - * prompt. - * - * 03/05/01 anil .s Fixed the problem with IRQ sharing - * among ISI-PCI cards. - * - * 03/05/01 anil .s Added support to display the version - * info during insmod as well as module - * listing by lsmod. - * - * 10/05/01 anil .s Done the modifications to the source - * file and Install script so that the - * same installation can be used for - * 2.2.x and 2.4.x kernel. - * - * 06/06/01 anil .s Now we drop both dtr and rts during - * shutdown_port as well as raise them - * during isicom_config_port. - * - * 09/06/01 acme@conectiva.com.br use capable, not suser, do - * restore_flags on failure in - * isicom_send_break, verify put_user - * result - * - * 11/02/03 ranjeeth Added support for 230 Kbps and 460 Kbps - * Baud index extended to 21 - * - * 20/03/03 ranjeeth Made to work for Linux Advanced server. - * Taken care of license warning. - * - * 10/12/03 Ravindra Made to work for Fedora Core 1 of - * Red Hat Distribution - * - * 06/01/05 Alan Cox Merged the ISI and base kernel strands - * into a single 2.6 driver - * - * *********************************************************** - * - * To use this driver you also need the support package. You - * can find this in RPM format on - * ftp://ftp.linux.org.uk/pub/linux/alan - * - * You can find the original tools for this direct from Multitech - * ftp://ftp.multitech.com/ISI-Cards/ - * - * Having installed the cards the module options (/etc/modprobe.conf) - * - * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 - * - * Omit those entries for boards you don't have installed. - * - * TODO - * Merge testing - * 64-bit verification - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include - -#define InterruptTheCard(base) outw(0, (base) + 0xc) -#define ClearInterrupt(base) inw((base) + 0x0a) - -#ifdef DEBUG -#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c)) -#else -#define isicom_paranoia_check(a, b, c) 0 -#endif - -static int isicom_probe(struct pci_dev *, const struct pci_device_id *); -static void __devexit isicom_remove(struct pci_dev *); - -static struct pci_device_id isicom_pci_tbl[] = { - { PCI_DEVICE(VENDOR_ID, 0x2028) }, - { PCI_DEVICE(VENDOR_ID, 0x2051) }, - { PCI_DEVICE(VENDOR_ID, 0x2052) }, - { PCI_DEVICE(VENDOR_ID, 0x2053) }, - { PCI_DEVICE(VENDOR_ID, 0x2054) }, - { PCI_DEVICE(VENDOR_ID, 0x2055) }, - { PCI_DEVICE(VENDOR_ID, 0x2056) }, - { PCI_DEVICE(VENDOR_ID, 0x2057) }, - { PCI_DEVICE(VENDOR_ID, 0x2058) }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, isicom_pci_tbl); - -static struct pci_driver isicom_driver = { - .name = "isicom", - .id_table = isicom_pci_tbl, - .probe = isicom_probe, - .remove = __devexit_p(isicom_remove) -}; - -static int prev_card = 3; /* start servicing isi_card[0] */ -static struct tty_driver *isicom_normal; - -static void isicom_tx(unsigned long _data); -static void isicom_start(struct tty_struct *tty); - -static DEFINE_TIMER(tx, isicom_tx, 0, 0); - -/* baud index mappings from linux defns to isi */ - -static signed char linuxb_to_isib[] = { - -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21 -}; - -struct isi_board { - unsigned long base; - int irq; - unsigned char port_count; - unsigned short status; - unsigned short port_status; /* each bit for each port */ - unsigned short shift_count; - struct isi_port *ports; - signed char count; - spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */ - unsigned long flags; - unsigned int index; -}; - -struct isi_port { - unsigned short magic; - struct tty_port port; - u16 channel; - u16 status; - struct isi_board *card; - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; -}; - -static struct isi_board isi_card[BOARD_COUNT]; -static struct isi_port isi_ports[PORT_COUNT]; - -/* - * Locking functions for card level locking. We need to own both - * the kernel lock for the card and have the card in a position that - * it wants to talk. - */ - -static inline int WaitTillCardIsFree(unsigned long base) -{ - unsigned int count = 0; - unsigned int a = in_atomic(); /* do we run under spinlock? */ - - while (!(inw(base + 0xe) & 0x1) && count++ < 100) - if (a) - mdelay(1); - else - msleep(1); - - return !(inw(base + 0xe) & 0x1); -} - -static int lock_card(struct isi_board *card) -{ - unsigned long base = card->base; - unsigned int retries, a; - - for (retries = 0; retries < 10; retries++) { - spin_lock_irqsave(&card->card_lock, card->flags); - for (a = 0; a < 10; a++) { - if (inw(base + 0xe) & 0x1) - return 1; - udelay(10); - } - spin_unlock_irqrestore(&card->card_lock, card->flags); - msleep(10); - } - pr_warning("Failed to lock Card (0x%lx)\n", card->base); - - return 0; /* Failed to acquire the card! */ -} - -static void unlock_card(struct isi_board *card) -{ - spin_unlock_irqrestore(&card->card_lock, card->flags); -} - -/* - * ISI Card specific ops ... - */ - -/* card->lock HAS to be held */ -static void raise_dtr(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0504, base); - InterruptTheCard(base); - port->status |= ISI_DTR; -} - -/* card->lock HAS to be held */ -static inline void drop_dtr(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0404, base); - InterruptTheCard(base); - port->status &= ~ISI_DTR; -} - -/* card->lock HAS to be held */ -static inline void raise_rts(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0a04, base); - InterruptTheCard(base); - port->status |= ISI_RTS; -} - -/* card->lock HAS to be held */ -static inline void drop_rts(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0804, base); - InterruptTheCard(base); - port->status &= ~ISI_RTS; -} - -/* card->lock MUST NOT be held */ - -static void isicom_dtr_rts(struct tty_port *port, int on) -{ - struct isi_port *ip = container_of(port, struct isi_port, port); - struct isi_board *card = ip->card; - unsigned long base = card->base; - u16 channel = ip->channel; - - if (!lock_card(card)) - return; - - if (on) { - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0f04, base); - InterruptTheCard(base); - ip->status |= (ISI_DTR | ISI_RTS); - } else { - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0C04, base); - InterruptTheCard(base); - ip->status &= ~(ISI_DTR | ISI_RTS); - } - unlock_card(card); -} - -/* card->lock HAS to be held */ -static void drop_dtr_rts(struct isi_port *port) -{ - struct isi_board *card = port->card; - unsigned long base = card->base; - u16 channel = port->channel; - - if (WaitTillCardIsFree(base)) - return; - - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0c04, base); - InterruptTheCard(base); - port->status &= ~(ISI_RTS | ISI_DTR); -} - -/* - * ISICOM Driver specific routines ... - * - */ - -static inline int __isicom_paranoia_check(struct isi_port const *port, - char *name, const char *routine) -{ - if (!port) { - pr_warning("Warning: bad isicom magic for dev %s in %s.\n", - name, routine); - return 1; - } - if (port->magic != ISICOM_MAGIC) { - pr_warning("Warning: NULL isicom port for dev %s in %s.\n", - name, routine); - return 1; - } - - return 0; -} - -/* - * Transmitter. - * - * We shovel data into the card buffers on a regular basis. The card - * will do the rest of the work for us. - */ - -static void isicom_tx(unsigned long _data) -{ - unsigned long flags, base; - unsigned int retries; - short count = (BOARD_COUNT-1), card; - short txcount, wrd, residue, word_count, cnt; - struct isi_port *port; - struct tty_struct *tty; - - /* find next active board */ - card = (prev_card + 1) & 0x0003; - while (count-- > 0) { - if (isi_card[card].status & BOARD_ACTIVE) - break; - card = (card + 1) & 0x0003; - } - if (!(isi_card[card].status & BOARD_ACTIVE)) - goto sched_again; - - prev_card = card; - - count = isi_card[card].port_count; - port = isi_card[card].ports; - base = isi_card[card].base; - - spin_lock_irqsave(&isi_card[card].card_lock, flags); - for (retries = 0; retries < 100; retries++) { - if (inw(base + 0xe) & 0x1) - break; - udelay(2); - } - if (retries >= 100) - goto unlock; - - tty = tty_port_tty_get(&port->port); - if (tty == NULL) - goto put_unlock; - - for (; count > 0; count--, port++) { - /* port not active or tx disabled to force flow control */ - if (!(port->port.flags & ASYNC_INITIALIZED) || - !(port->status & ISI_TXOK)) - continue; - - txcount = min_t(short, TX_SIZE, port->xmit_cnt); - if (txcount <= 0 || tty->stopped || tty->hw_stopped) - continue; - - if (!(inw(base + 0x02) & (1 << port->channel))) - continue; - - pr_debug("txing %d bytes, port%d.\n", - txcount, port->channel + 1); - outw((port->channel << isi_card[card].shift_count) | txcount, - base); - residue = NO; - wrd = 0; - while (1) { - cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE - - port->xmit_tail)); - if (residue == YES) { - residue = NO; - if (cnt > 0) { - wrd |= (port->port.xmit_buf[port->xmit_tail] - << 8); - port->xmit_tail = (port->xmit_tail + 1) - & (SERIAL_XMIT_SIZE - 1); - port->xmit_cnt--; - txcount--; - cnt--; - outw(wrd, base); - } else { - outw(wrd, base); - break; - } - } - if (cnt <= 0) - break; - word_count = cnt >> 1; - outsw(base, port->port.xmit_buf+port->xmit_tail, word_count); - port->xmit_tail = (port->xmit_tail - + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1); - txcount -= (word_count << 1); - port->xmit_cnt -= (word_count << 1); - if (cnt & 0x0001) { - residue = YES; - wrd = port->port.xmit_buf[port->xmit_tail]; - port->xmit_tail = (port->xmit_tail + 1) - & (SERIAL_XMIT_SIZE - 1); - port->xmit_cnt--; - txcount--; - } - } - - InterruptTheCard(base); - if (port->xmit_cnt <= 0) - port->status &= ~ISI_TXOK; - if (port->xmit_cnt <= WAKEUP_CHARS) - tty_wakeup(tty); - } - -put_unlock: - tty_kref_put(tty); -unlock: - spin_unlock_irqrestore(&isi_card[card].card_lock, flags); - /* schedule another tx for hopefully in about 10ms */ -sched_again: - mod_timer(&tx, jiffies + msecs_to_jiffies(10)); -} - -/* - * Main interrupt handler routine - */ - -static irqreturn_t isicom_interrupt(int irq, void *dev_id) -{ - struct isi_board *card = dev_id; - struct isi_port *port; - struct tty_struct *tty; - unsigned long base; - u16 header, word_count, count, channel; - short byte_count; - unsigned char *rp; - - if (!card || !(card->status & FIRMWARE_LOADED)) - return IRQ_NONE; - - base = card->base; - - /* did the card interrupt us? */ - if (!(inw(base + 0x0e) & 0x02)) - return IRQ_NONE; - - spin_lock(&card->card_lock); - - /* - * disable any interrupts from the PCI card and lower the - * interrupt line - */ - outw(0x8000, base+0x04); - ClearInterrupt(base); - - inw(base); /* get the dummy word out */ - header = inw(base); - channel = (header & 0x7800) >> card->shift_count; - byte_count = header & 0xff; - - if (channel + 1 > card->port_count) { - pr_warning("%s(0x%lx): %d(channel) > port_count.\n", - __func__, base, channel+1); - outw(0x0000, base+0x04); /* enable interrupts */ - spin_unlock(&card->card_lock); - return IRQ_HANDLED; - } - port = card->ports + channel; - if (!(port->port.flags & ASYNC_INITIALIZED)) { - outw(0x0000, base+0x04); /* enable interrupts */ - spin_unlock(&card->card_lock); - return IRQ_HANDLED; - } - - tty = tty_port_tty_get(&port->port); - if (tty == NULL) { - word_count = byte_count >> 1; - while (byte_count > 1) { - inw(base); - byte_count -= 2; - } - if (byte_count & 0x01) - inw(base); - outw(0x0000, base+0x04); /* enable interrupts */ - spin_unlock(&card->card_lock); - return IRQ_HANDLED; - } - - if (header & 0x8000) { /* Status Packet */ - header = inw(base); - switch (header & 0xff) { - case 0: /* Change in EIA signals */ - if (port->port.flags & ASYNC_CHECK_CD) { - if (port->status & ISI_DCD) { - if (!(header & ISI_DCD)) { - /* Carrier has been lost */ - pr_debug("%s: DCD->low.\n", - __func__); - port->status &= ~ISI_DCD; - tty_hangup(tty); - } - } else if (header & ISI_DCD) { - /* Carrier has been detected */ - pr_debug("%s: DCD->high.\n", - __func__); - port->status |= ISI_DCD; - wake_up_interruptible(&port->port.open_wait); - } - } else { - if (header & ISI_DCD) - port->status |= ISI_DCD; - else - port->status &= ~ISI_DCD; - } - - if (port->port.flags & ASYNC_CTS_FLOW) { - if (tty->hw_stopped) { - if (header & ISI_CTS) { - port->port.tty->hw_stopped = 0; - /* start tx ing */ - port->status |= (ISI_TXOK - | ISI_CTS); - tty_wakeup(tty); - } - } else if (!(header & ISI_CTS)) { - tty->hw_stopped = 1; - /* stop tx ing */ - port->status &= ~(ISI_TXOK | ISI_CTS); - } - } else { - if (header & ISI_CTS) - port->status |= ISI_CTS; - else - port->status &= ~ISI_CTS; - } - - if (header & ISI_DSR) - port->status |= ISI_DSR; - else - port->status &= ~ISI_DSR; - - if (header & ISI_RI) - port->status |= ISI_RI; - else - port->status &= ~ISI_RI; - - break; - - case 1: /* Received Break !!! */ - tty_insert_flip_char(tty, 0, TTY_BREAK); - if (port->port.flags & ASYNC_SAK) - do_SAK(tty); - tty_flip_buffer_push(tty); - break; - - case 2: /* Statistics */ - pr_debug("%s: stats!!!\n", __func__); - break; - - default: - pr_debug("%s: Unknown code in status packet.\n", - __func__); - break; - } - } else { /* Data Packet */ - - count = tty_prepare_flip_string(tty, &rp, byte_count & ~1); - pr_debug("%s: Can rx %d of %d bytes.\n", - __func__, count, byte_count); - word_count = count >> 1; - insw(base, rp, word_count); - byte_count -= (word_count << 1); - if (count & 0x0001) { - tty_insert_flip_char(tty, inw(base) & 0xff, - TTY_NORMAL); - byte_count -= 2; - } - if (byte_count > 0) { - pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n", - __func__, base, channel + 1); - /* drain out unread xtra data */ - while (byte_count > 0) { - inw(base); - byte_count -= 2; - } - } - tty_flip_buffer_push(tty); - } - outw(0x0000, base+0x04); /* enable interrupts */ - spin_unlock(&card->card_lock); - tty_kref_put(tty); - - return IRQ_HANDLED; -} - -static void isicom_config_port(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long baud; - unsigned long base = card->base; - u16 channel_setup, channel = port->channel, - shift_count = card->shift_count; - unsigned char flow_ctrl; - - /* FIXME: Switch to new tty baud API */ - baud = C_BAUD(tty); - if (baud & CBAUDEX) { - baud &= ~CBAUDEX; - - /* if CBAUDEX bit is on and the baud is set to either 50 or 75 - * then the card is programmed for 57.6Kbps or 115Kbps - * respectively. - */ - - /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */ - if (baud < 1 || baud > 4) - tty->termios->c_cflag &= ~CBAUDEX; - else - baud += 15; - } - if (baud == 15) { - - /* the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set - * by the set_serial_info ioctl ... this is done by - * the 'setserial' utility. - */ - - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baud++; /* 57.6 Kbps */ - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baud += 2; /* 115 Kbps */ - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - baud += 3; /* 230 kbps*/ - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - baud += 4; /* 460 kbps*/ - } - if (linuxb_to_isib[baud] == -1) { - /* hang up */ - drop_dtr(port); - return; - } else - raise_dtr(port); - - if (WaitTillCardIsFree(base) == 0) { - outw(0x8000 | (channel << shift_count) | 0x03, base); - outw(linuxb_to_isib[baud] << 8 | 0x03, base); - channel_setup = 0; - switch (C_CSIZE(tty)) { - case CS5: - channel_setup |= ISICOM_CS5; - break; - case CS6: - channel_setup |= ISICOM_CS6; - break; - case CS7: - channel_setup |= ISICOM_CS7; - break; - case CS8: - channel_setup |= ISICOM_CS8; - break; - } - - if (C_CSTOPB(tty)) - channel_setup |= ISICOM_2SB; - if (C_PARENB(tty)) { - channel_setup |= ISICOM_EVPAR; - if (C_PARODD(tty)) - channel_setup |= ISICOM_ODPAR; - } - outw(channel_setup, base); - InterruptTheCard(base); - } - if (C_CLOCAL(tty)) - port->port.flags &= ~ASYNC_CHECK_CD; - else - port->port.flags |= ASYNC_CHECK_CD; - - /* flow control settings ...*/ - flow_ctrl = 0; - port->port.flags &= ~ASYNC_CTS_FLOW; - if (C_CRTSCTS(tty)) { - port->port.flags |= ASYNC_CTS_FLOW; - flow_ctrl |= ISICOM_CTSRTS; - } - if (I_IXON(tty)) - flow_ctrl |= ISICOM_RESPOND_XONXOFF; - if (I_IXOFF(tty)) - flow_ctrl |= ISICOM_INITIATE_XONXOFF; - - if (WaitTillCardIsFree(base) == 0) { - outw(0x8000 | (channel << shift_count) | 0x04, base); - outw(flow_ctrl << 8 | 0x05, base); - outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base); - InterruptTheCard(base); - } - - /* rx enabled -> enable port for rx on the card */ - if (C_CREAD(tty)) { - card->port_status |= (1 << channel); - outw(card->port_status, base + 0x02); - } -} - -/* open et all */ - -static inline void isicom_setup_board(struct isi_board *bp) -{ - int channel; - struct isi_port *port; - - bp->count++; - if (!(bp->status & BOARD_INIT)) { - port = bp->ports; - for (channel = 0; channel < bp->port_count; channel++, port++) - drop_dtr_rts(port); - } - bp->status |= BOARD_ACTIVE | BOARD_INIT; -} - -/* Activate and thus setup board are protected from races against shutdown - by the tty_port mutex */ - -static int isicom_activate(struct tty_port *tport, struct tty_struct *tty) -{ - struct isi_port *port = container_of(tport, struct isi_port, port); - struct isi_board *card = port->card; - unsigned long flags; - - if (tty_port_alloc_xmit_buf(tport) < 0) - return -ENOMEM; - - spin_lock_irqsave(&card->card_lock, flags); - isicom_setup_board(card); - - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - - /* discard any residual data */ - if (WaitTillCardIsFree(card->base) == 0) { - outw(0x8000 | (port->channel << card->shift_count) | 0x02, - card->base); - outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base); - InterruptTheCard(card->base); - } - isicom_config_port(tty); - spin_unlock_irqrestore(&card->card_lock, flags); - - return 0; -} - -static int isicom_carrier_raised(struct tty_port *port) -{ - struct isi_port *ip = container_of(port, struct isi_port, port); - return (ip->status & ISI_DCD)?1 : 0; -} - -static struct tty_port *isicom_find_port(struct tty_struct *tty) -{ - struct isi_port *port; - struct isi_board *card; - unsigned int board; - int line = tty->index; - - if (line < 0 || line > PORT_COUNT-1) - return NULL; - board = BOARD(line); - card = &isi_card[board]; - - if (!(card->status & FIRMWARE_LOADED)) - return NULL; - - /* open on a port greater than the port count for the card !!! */ - if (line > ((board * 16) + card->port_count - 1)) - return NULL; - - port = &isi_ports[line]; - if (isicom_paranoia_check(port, tty->name, "isicom_open")) - return NULL; - - return &port->port; -} - -static int isicom_open(struct tty_struct *tty, struct file *filp) -{ - struct isi_port *port; - struct tty_port *tport; - - tport = isicom_find_port(tty); - if (tport == NULL) - return -ENODEV; - port = container_of(tport, struct isi_port, port); - - tty->driver_data = port; - return tty_port_open(tport, tty, filp); -} - -/* close et all */ - -/* card->lock HAS to be held */ -static void isicom_shutdown_port(struct isi_port *port) -{ - struct isi_board *card = port->card; - - if (--card->count < 0) { - pr_debug("%s: bad board(0x%lx) count %d.\n", - __func__, card->base, card->count); - card->count = 0; - } - /* last port was closed, shutdown that board too */ - if (!card->count) - card->status &= BOARD_ACTIVE; -} - -static void isicom_flush_buffer(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long flags; - - if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer")) - return; - - spin_lock_irqsave(&card->card_lock, flags); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore(&card->card_lock, flags); - - tty_wakeup(tty); -} - -static void isicom_shutdown(struct tty_port *port) -{ - struct isi_port *ip = container_of(port, struct isi_port, port); - struct isi_board *card = ip->card; - unsigned long flags; - - /* indicate to the card that no more data can be received - on this port */ - spin_lock_irqsave(&card->card_lock, flags); - card->port_status &= ~(1 << ip->channel); - outw(card->port_status, card->base + 0x02); - isicom_shutdown_port(ip); - spin_unlock_irqrestore(&card->card_lock, flags); - tty_port_free_xmit_buf(port); -} - -static void isicom_close(struct tty_struct *tty, struct file *filp) -{ - struct isi_port *ip = tty->driver_data; - struct tty_port *port; - - if (ip == NULL) - return; - - port = &ip->port; - if (isicom_paranoia_check(ip, tty->name, "isicom_close")) - return; - tty_port_close(port, tty, filp); -} - -/* write et all */ -static int isicom_write(struct tty_struct *tty, const unsigned char *buf, - int count) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long flags; - int cnt, total = 0; - - if (isicom_paranoia_check(port, tty->name, "isicom_write")) - return 0; - - spin_lock_irqsave(&card->card_lock, flags); - - while (1) { - cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - - 1, SERIAL_XMIT_SIZE - port->xmit_head)); - if (cnt <= 0) - break; - - memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt); - port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE - - 1); - port->xmit_cnt += cnt; - buf += cnt; - count -= cnt; - total += cnt; - } - if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped) - port->status |= ISI_TXOK; - spin_unlock_irqrestore(&card->card_lock, flags); - return total; -} - -/* put_char et all */ -static int isicom_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long flags; - - if (isicom_paranoia_check(port, tty->name, "isicom_put_char")) - return 0; - - spin_lock_irqsave(&card->card_lock, flags); - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { - spin_unlock_irqrestore(&card->card_lock, flags); - return 0; - } - - port->port.xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= (SERIAL_XMIT_SIZE - 1); - port->xmit_cnt++; - spin_unlock_irqrestore(&card->card_lock, flags); - return 1; -} - -/* flush_chars et all */ -static void isicom_flush_chars(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars")) - return; - - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !port->port.xmit_buf) - return; - - /* this tells the transmitter to consider this port for - data output to the card ... that's the best we can do. */ - port->status |= ISI_TXOK; -} - -/* write_room et all */ -static int isicom_write_room(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - int free; - - if (isicom_paranoia_check(port, tty->name, "isicom_write_room")) - return 0; - - free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (free < 0) - free = 0; - return free; -} - -/* chars_in_buffer et all */ -static int isicom_chars_in_buffer(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer")) - return 0; - return port->xmit_cnt; -} - -/* ioctl et all */ -static int isicom_send_break(struct tty_struct *tty, int length) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - unsigned long base = card->base; - - if (length == -1) - return -EOPNOTSUPP; - - if (!lock_card(card)) - return -EINVAL; - - outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base); - outw((length & 0xff) << 8 | 0x00, base); - outw((length & 0xff00), base); - InterruptTheCard(base); - - unlock_card(card); - return 0; -} - -static int isicom_tiocmget(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - /* just send the port status */ - u16 status = port->status; - - if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) - return -ENODEV; - - return ((status & ISI_RTS) ? TIOCM_RTS : 0) | - ((status & ISI_DTR) ? TIOCM_DTR : 0) | - ((status & ISI_DCD) ? TIOCM_CAR : 0) | - ((status & ISI_DSR) ? TIOCM_DSR : 0) | - ((status & ISI_CTS) ? TIOCM_CTS : 0) | - ((status & ISI_RI ) ? TIOCM_RI : 0); -} - -static int isicom_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct isi_port *port = tty->driver_data; - unsigned long flags; - - if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) - return -ENODEV; - - spin_lock_irqsave(&port->card->card_lock, flags); - if (set & TIOCM_RTS) - raise_rts(port); - if (set & TIOCM_DTR) - raise_dtr(port); - - if (clear & TIOCM_RTS) - drop_rts(port); - if (clear & TIOCM_DTR) - drop_dtr(port); - spin_unlock_irqrestore(&port->card->card_lock, flags); - - return 0; -} - -static int isicom_set_serial_info(struct tty_struct *tty, - struct serial_struct __user *info) -{ - struct isi_port *port = tty->driver_data; - struct serial_struct newinfo; - int reconfig_port; - - if (copy_from_user(&newinfo, info, sizeof(newinfo))) - return -EFAULT; - - mutex_lock(&port->port.mutex); - reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) != - (newinfo.flags & ASYNC_SPD_MASK)); - - if (!capable(CAP_SYS_ADMIN)) { - if ((newinfo.close_delay != port->port.close_delay) || - (newinfo.closing_wait != port->port.closing_wait) || - ((newinfo.flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) { - mutex_unlock(&port->port.mutex); - return -EPERM; - } - port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | - (newinfo.flags & ASYNC_USR_MASK)); - } else { - port->port.close_delay = newinfo.close_delay; - port->port.closing_wait = newinfo.closing_wait; - port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | - (newinfo.flags & ASYNC_FLAGS)); - } - if (reconfig_port) { - unsigned long flags; - spin_lock_irqsave(&port->card->card_lock, flags); - isicom_config_port(tty); - spin_unlock_irqrestore(&port->card->card_lock, flags); - } - mutex_unlock(&port->port.mutex); - return 0; -} - -static int isicom_get_serial_info(struct isi_port *port, - struct serial_struct __user *info) -{ - struct serial_struct out_info; - - mutex_lock(&port->port.mutex); - memset(&out_info, 0, sizeof(out_info)); -/* out_info.type = ? */ - out_info.line = port - isi_ports; - out_info.port = port->card->base; - out_info.irq = port->card->irq; - out_info.flags = port->port.flags; -/* out_info.baud_base = ? */ - out_info.close_delay = port->port.close_delay; - out_info.closing_wait = port->port.closing_wait; - mutex_unlock(&port->port.mutex); - if (copy_to_user(info, &out_info, sizeof(out_info))) - return -EFAULT; - return 0; -} - -static int isicom_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct isi_port *port = tty->driver_data; - void __user *argp = (void __user *)arg; - - if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) - return -ENODEV; - - switch (cmd) { - case TIOCGSERIAL: - return isicom_get_serial_info(port, argp); - - case TIOCSSERIAL: - return isicom_set_serial_info(tty, argp); - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -/* set_termios et all */ -static void isicom_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct isi_port *port = tty->driver_data; - unsigned long flags; - - if (isicom_paranoia_check(port, tty->name, "isicom_set_termios")) - return; - - if (tty->termios->c_cflag == old_termios->c_cflag && - tty->termios->c_iflag == old_termios->c_iflag) - return; - - spin_lock_irqsave(&port->card->card_lock, flags); - isicom_config_port(tty); - spin_unlock_irqrestore(&port->card->card_lock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - isicom_start(tty); - } -} - -/* throttle et all */ -static void isicom_throttle(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - - if (isicom_paranoia_check(port, tty->name, "isicom_throttle")) - return; - - /* tell the card that this port cannot handle any more data for now */ - card->port_status &= ~(1 << port->channel); - outw(card->port_status, card->base + 0x02); -} - -/* unthrottle et all */ -static void isicom_unthrottle(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; - - if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle")) - return; - - /* tell the card that this port is ready to accept more data */ - card->port_status |= (1 << port->channel); - outw(card->port_status, card->base + 0x02); -} - -/* stop et all */ -static void isicom_stop(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_stop")) - return; - - /* this tells the transmitter not to consider this port for - data output to the card. */ - port->status &= ~ISI_TXOK; -} - -/* start et all */ -static void isicom_start(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_start")) - return; - - /* this tells the transmitter to consider this port for - data output to the card. */ - port->status |= ISI_TXOK; -} - -static void isicom_hangup(struct tty_struct *tty) -{ - struct isi_port *port = tty->driver_data; - - if (isicom_paranoia_check(port, tty->name, "isicom_hangup")) - return; - tty_port_hangup(&port->port); -} - - -/* - * Driver init and deinit functions - */ - -static const struct tty_operations isicom_ops = { - .open = isicom_open, - .close = isicom_close, - .write = isicom_write, - .put_char = isicom_put_char, - .flush_chars = isicom_flush_chars, - .write_room = isicom_write_room, - .chars_in_buffer = isicom_chars_in_buffer, - .ioctl = isicom_ioctl, - .set_termios = isicom_set_termios, - .throttle = isicom_throttle, - .unthrottle = isicom_unthrottle, - .stop = isicom_stop, - .start = isicom_start, - .hangup = isicom_hangup, - .flush_buffer = isicom_flush_buffer, - .tiocmget = isicom_tiocmget, - .tiocmset = isicom_tiocmset, - .break_ctl = isicom_send_break, -}; - -static const struct tty_port_operations isicom_port_ops = { - .carrier_raised = isicom_carrier_raised, - .dtr_rts = isicom_dtr_rts, - .activate = isicom_activate, - .shutdown = isicom_shutdown, -}; - -static int __devinit reset_card(struct pci_dev *pdev, - const unsigned int card, unsigned int *signature) -{ - struct isi_board *board = pci_get_drvdata(pdev); - unsigned long base = board->base; - unsigned int sig, portcount = 0; - int retval = 0; - - dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1, - base); - - inw(base + 0x8); - - msleep(10); - - outw(0, base + 0x8); /* Reset */ - - msleep(1000); - - sig = inw(base + 0x4) & 0xff; - - if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd && - sig != 0xee) { - dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible " - "bad I/O Port Address 0x%lx).\n", card + 1, base); - dev_dbg(&pdev->dev, "Sig=0x%x\n", sig); - retval = -EIO; - goto end; - } - - msleep(10); - - portcount = inw(base + 0x2); - if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 && - portcount != 8 && portcount != 16)) { - dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n", - card + 1); - retval = -EIO; - goto end; - } - - switch (sig) { - case 0xa5: - case 0xbb: - case 0xdd: - board->port_count = (portcount == 4) ? 4 : 8; - board->shift_count = 12; - break; - case 0xcc: - case 0xee: - board->port_count = 16; - board->shift_count = 11; - break; - } - dev_info(&pdev->dev, "-Done\n"); - *signature = sig; - -end: - return retval; -} - -static int __devinit load_firmware(struct pci_dev *pdev, - const unsigned int index, const unsigned int signature) -{ - struct isi_board *board = pci_get_drvdata(pdev); - const struct firmware *fw; - unsigned long base = board->base; - unsigned int a; - u16 word_count, status; - int retval = -EIO; - char *name; - u8 *data; - - struct stframe { - u16 addr; - u16 count; - u8 data[0]; - } *frame; - - switch (signature) { - case 0xa5: - name = "isi608.bin"; - break; - case 0xbb: - name = "isi608em.bin"; - break; - case 0xcc: - name = "isi616em.bin"; - break; - case 0xdd: - name = "isi4608.bin"; - break; - case 0xee: - name = "isi4616.bin"; - break; - default: - dev_err(&pdev->dev, "Unknown signature.\n"); - goto end; - } - - retval = request_firmware(&fw, name, &pdev->dev); - if (retval) - goto end; - - retval = -EIO; - - for (frame = (struct stframe *)fw->data; - frame < (struct stframe *)(fw->data + fw->size); - frame = (struct stframe *)((u8 *)(frame + 1) + - frame->count)) { - if (WaitTillCardIsFree(base)) - goto errrelfw; - - outw(0xf0, base); /* start upload sequence */ - outw(0x00, base); - outw(frame->addr, base); /* lsb of address */ - - word_count = frame->count / 2 + frame->count % 2; - outw(word_count, base); - InterruptTheCard(base); - - udelay(100); /* 0x2f */ - - if (WaitTillCardIsFree(base)) - goto errrelfw; - - status = inw(base + 0x4); - if (status != 0) { - dev_warn(&pdev->dev, "Card%d rejected load header:\n" - "Address:0x%x\n" - "Count:0x%x\n" - "Status:0x%x\n", - index + 1, frame->addr, frame->count, status); - goto errrelfw; - } - outsw(base, frame->data, word_count); - - InterruptTheCard(base); - - udelay(50); /* 0x0f */ - - if (WaitTillCardIsFree(base)) - goto errrelfw; - - status = inw(base + 0x4); - if (status != 0) { - dev_err(&pdev->dev, "Card%d got out of sync.Card " - "Status:0x%x\n", index + 1, status); - goto errrelfw; - } - } - -/* XXX: should we test it by reading it back and comparing with original like - * in load firmware package? */ - for (frame = (struct stframe *)fw->data; - frame < (struct stframe *)(fw->data + fw->size); - frame = (struct stframe *)((u8 *)(frame + 1) + - frame->count)) { - if (WaitTillCardIsFree(base)) - goto errrelfw; - - outw(0xf1, base); /* start download sequence */ - outw(0x00, base); - outw(frame->addr, base); /* lsb of address */ - - word_count = (frame->count >> 1) + frame->count % 2; - outw(word_count + 1, base); - InterruptTheCard(base); - - udelay(50); /* 0xf */ - - if (WaitTillCardIsFree(base)) - goto errrelfw; - - status = inw(base + 0x4); - if (status != 0) { - dev_warn(&pdev->dev, "Card%d rejected verify header:\n" - "Address:0x%x\n" - "Count:0x%x\n" - "Status: 0x%x\n", - index + 1, frame->addr, frame->count, status); - goto errrelfw; - } - - data = kmalloc(word_count * 2, GFP_KERNEL); - if (data == NULL) { - dev_err(&pdev->dev, "Card%d, firmware upload " - "failed, not enough memory\n", index + 1); - goto errrelfw; - } - inw(base); - insw(base, data, word_count); - InterruptTheCard(base); - - for (a = 0; a < frame->count; a++) - if (data[a] != frame->data[a]) { - kfree(data); - dev_err(&pdev->dev, "Card%d, firmware upload " - "failed\n", index + 1); - goto errrelfw; - } - kfree(data); - - udelay(50); /* 0xf */ - - if (WaitTillCardIsFree(base)) - goto errrelfw; - - status = inw(base + 0x4); - if (status != 0) { - dev_err(&pdev->dev, "Card%d verify got out of sync. " - "Card Status:0x%x\n", index + 1, status); - goto errrelfw; - } - } - - /* xfer ctrl */ - if (WaitTillCardIsFree(base)) - goto errrelfw; - - outw(0xf2, base); - outw(0x800, base); - outw(0x0, base); - outw(0x0, base); - InterruptTheCard(base); - outw(0x0, base + 0x4); /* for ISI4608 cards */ - - board->status |= FIRMWARE_LOADED; - retval = 0; - -errrelfw: - release_firmware(fw); -end: - return retval; -} - -/* - * Insmod can set static symbols so keep these static - */ -static unsigned int card_count; - -static int __devinit isicom_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - unsigned int uninitialized_var(signature), index; - int retval = -EPERM; - struct isi_board *board = NULL; - - if (card_count >= BOARD_COUNT) - goto err; - - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "failed to enable\n"); - goto err; - } - - dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device); - - /* allot the first empty slot in the array */ - for (index = 0; index < BOARD_COUNT; index++) { - if (isi_card[index].base == 0) { - board = &isi_card[index]; - break; - } - } - if (index == BOARD_COUNT) { - retval = -ENODEV; - goto err_disable; - } - - board->index = index; - board->base = pci_resource_start(pdev, 3); - board->irq = pdev->irq; - card_count++; - - pci_set_drvdata(pdev, board); - - retval = pci_request_region(pdev, 3, ISICOM_NAME); - if (retval) { - dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d " - "will be disabled.\n", board->base, board->base + 15, - index + 1); - retval = -EBUSY; - goto errdec; - } - - retval = request_irq(board->irq, isicom_interrupt, - IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board); - if (retval < 0) { - dev_err(&pdev->dev, "Could not install handler at Irq %d. " - "Card%d will be disabled.\n", board->irq, index + 1); - goto errunrr; - } - - retval = reset_card(pdev, index, &signature); - if (retval < 0) - goto errunri; - - retval = load_firmware(pdev, index, signature); - if (retval < 0) - goto errunri; - - for (index = 0; index < board->port_count; index++) - tty_register_device(isicom_normal, board->index * 16 + index, - &pdev->dev); - - return 0; - -errunri: - free_irq(board->irq, board); -errunrr: - pci_release_region(pdev, 3); -errdec: - board->base = 0; - card_count--; -err_disable: - pci_disable_device(pdev); -err: - return retval; -} - -static void __devexit isicom_remove(struct pci_dev *pdev) -{ - struct isi_board *board = pci_get_drvdata(pdev); - unsigned int i; - - for (i = 0; i < board->port_count; i++) - tty_unregister_device(isicom_normal, board->index * 16 + i); - - free_irq(board->irq, board); - pci_release_region(pdev, 3); - board->base = 0; - card_count--; - pci_disable_device(pdev); -} - -static int __init isicom_init(void) -{ - int retval, idx, channel; - struct isi_port *port; - - for (idx = 0; idx < BOARD_COUNT; idx++) { - port = &isi_ports[idx * 16]; - isi_card[idx].ports = port; - spin_lock_init(&isi_card[idx].card_lock); - for (channel = 0; channel < 16; channel++, port++) { - tty_port_init(&port->port); - port->port.ops = &isicom_port_ops; - port->magic = ISICOM_MAGIC; - port->card = &isi_card[idx]; - port->channel = channel; - port->port.close_delay = 50 * HZ/100; - port->port.closing_wait = 3000 * HZ/100; - port->status = 0; - /* . . . */ - } - isi_card[idx].base = 0; - isi_card[idx].irq = 0; - } - - /* tty driver structure initialization */ - isicom_normal = alloc_tty_driver(PORT_COUNT); - if (!isicom_normal) { - retval = -ENOMEM; - goto error; - } - - isicom_normal->owner = THIS_MODULE; - isicom_normal->name = "ttyM"; - isicom_normal->major = ISICOM_NMAJOR; - isicom_normal->minor_start = 0; - isicom_normal->type = TTY_DRIVER_TYPE_SERIAL; - isicom_normal->subtype = SERIAL_TYPE_NORMAL; - isicom_normal->init_termios = tty_std_termios; - isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | - CLOCAL; - isicom_normal->flags = TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK; - tty_set_operations(isicom_normal, &isicom_ops); - - retval = tty_register_driver(isicom_normal); - if (retval) { - pr_debug("Couldn't register the dialin driver\n"); - goto err_puttty; - } - - retval = pci_register_driver(&isicom_driver); - if (retval < 0) { - pr_err("Unable to register pci driver.\n"); - goto err_unrtty; - } - - mod_timer(&tx, jiffies + 1); - - return 0; -err_unrtty: - tty_unregister_driver(isicom_normal); -err_puttty: - put_tty_driver(isicom_normal); -error: - return retval; -} - -static void __exit isicom_exit(void) -{ - del_timer_sync(&tx); - - pci_unregister_driver(&isicom_driver); - tty_unregister_driver(isicom_normal); - put_tty_driver(isicom_normal); -} - -module_init(isicom_init); -module_exit(isicom_exit); - -MODULE_AUTHOR("MultiTech"); -MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("isi608.bin"); -MODULE_FIRMWARE("isi608em.bin"); -MODULE_FIRMWARE("isi616em.bin"); -MODULE_FIRMWARE("isi4608.bin"); -MODULE_FIRMWARE("isi4616.bin"); diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c deleted file mode 100644 index 35b0c38590e6..000000000000 --- a/drivers/char/moxa.c +++ /dev/null @@ -1,2092 +0,0 @@ -/*****************************************************************************/ -/* - * moxa.c -- MOXA Intellio family multiport serial driver. - * - * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com). - * Copyright (c) 2007 Jiri Slaby - * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* - * MOXA Intellio Series Driver - * for : LINUX - * date : 1999/1/7 - * version : 5.1 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "moxa.h" - -#define MOXA_VERSION "6.0k" - -#define MOXA_FW_HDRLEN 32 - -#define MOXAMAJOR 172 - -#define MAX_BOARDS 4 /* Don't change this value */ -#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */ -#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD) - -#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \ - (brd)->boardType == MOXA_BOARD_C320_PCI) - -/* - * Define the Moxa PCI vendor and device IDs. - */ -#define MOXA_BUS_TYPE_ISA 0 -#define MOXA_BUS_TYPE_PCI 1 - -enum { - MOXA_BOARD_C218_PCI = 1, - MOXA_BOARD_C218_ISA, - MOXA_BOARD_C320_PCI, - MOXA_BOARD_C320_ISA, - MOXA_BOARD_CP204J, -}; - -static char *moxa_brdname[] = -{ - "C218 Turbo PCI series", - "C218 Turbo ISA series", - "C320 Turbo PCI series", - "C320 Turbo ISA series", - "CP-204J series", -}; - -#ifdef CONFIG_PCI -static struct pci_device_id moxa_pcibrds[] = { - { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218), - .driver_data = MOXA_BOARD_C218_PCI }, - { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320), - .driver_data = MOXA_BOARD_C320_PCI }, - { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J), - .driver_data = MOXA_BOARD_CP204J }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, moxa_pcibrds); -#endif /* CONFIG_PCI */ - -struct moxa_port; - -static struct moxa_board_conf { - int boardType; - int numPorts; - int busType; - - unsigned int ready; - - struct moxa_port *ports; - - void __iomem *basemem; - void __iomem *intNdx; - void __iomem *intPend; - void __iomem *intTable; -} moxa_boards[MAX_BOARDS]; - -struct mxser_mstatus { - tcflag_t cflag; - int cts; - int dsr; - int ri; - int dcd; -}; - -struct moxaq_str { - int inq; - int outq; -}; - -struct moxa_port { - struct tty_port port; - struct moxa_board_conf *board; - void __iomem *tableAddr; - - int type; - int cflag; - unsigned long statusflags; - - u8 DCDState; /* Protected by the port lock */ - u8 lineCtrl; - u8 lowChkFlag; -}; - -struct mon_str { - int tick; - int rxcnt[MAX_PORTS]; - int txcnt[MAX_PORTS]; -}; - -/* statusflags */ -#define TXSTOPPED 1 -#define LOWWAIT 2 -#define EMPTYWAIT 3 - -#define SERIAL_DO_RESTART - -#define WAKEUP_CHARS 256 - -static int ttymajor = MOXAMAJOR; -static struct mon_str moxaLog; -static unsigned int moxaFuncTout = HZ / 2; -static unsigned int moxaLowWaterChk; -static DEFINE_MUTEX(moxa_openlock); -static DEFINE_SPINLOCK(moxa_lock); - -static unsigned long baseaddr[MAX_BOARDS]; -static unsigned int type[MAX_BOARDS]; -static unsigned int numports[MAX_BOARDS]; - -MODULE_AUTHOR("William Chen"); -MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("c218tunx.cod"); -MODULE_FIRMWARE("cp204unx.cod"); -MODULE_FIRMWARE("c320tunx.cod"); - -module_param_array(type, uint, NULL, 0); -MODULE_PARM_DESC(type, "card type: C218=2, C320=4"); -module_param_array(baseaddr, ulong, NULL, 0); -MODULE_PARM_DESC(baseaddr, "base address"); -module_param_array(numports, uint, NULL, 0); -MODULE_PARM_DESC(numports, "numports (ignored for C218)"); - -module_param(ttymajor, int, 0); - -/* - * static functions: - */ -static int moxa_open(struct tty_struct *, struct file *); -static void moxa_close(struct tty_struct *, struct file *); -static int moxa_write(struct tty_struct *, const unsigned char *, int); -static int moxa_write_room(struct tty_struct *); -static void moxa_flush_buffer(struct tty_struct *); -static int moxa_chars_in_buffer(struct tty_struct *); -static void moxa_set_termios(struct tty_struct *, struct ktermios *); -static void moxa_stop(struct tty_struct *); -static void moxa_start(struct tty_struct *); -static void moxa_hangup(struct tty_struct *); -static int moxa_tiocmget(struct tty_struct *tty); -static int moxa_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static void moxa_poll(unsigned long); -static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); -static void moxa_shutdown(struct tty_port *); -static int moxa_carrier_raised(struct tty_port *); -static void moxa_dtr_rts(struct tty_port *, int); -/* - * moxa board interface functions: - */ -static void MoxaPortEnable(struct moxa_port *); -static void MoxaPortDisable(struct moxa_port *); -static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t); -static int MoxaPortGetLineOut(struct moxa_port *, int *, int *); -static void MoxaPortLineCtrl(struct moxa_port *, int, int); -static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int); -static int MoxaPortLineStatus(struct moxa_port *); -static void MoxaPortFlushData(struct moxa_port *, int); -static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int); -static int MoxaPortReadData(struct moxa_port *); -static int MoxaPortTxQueue(struct moxa_port *); -static int MoxaPortRxQueue(struct moxa_port *); -static int MoxaPortTxFree(struct moxa_port *); -static void MoxaPortTxDisable(struct moxa_port *); -static void MoxaPortTxEnable(struct moxa_port *); -static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *); -static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *); -static void MoxaSetFifo(struct moxa_port *port, int enable); - -/* - * I/O functions - */ - -static DEFINE_SPINLOCK(moxafunc_lock); - -static void moxa_wait_finish(void __iomem *ofsAddr) -{ - unsigned long end = jiffies + moxaFuncTout; - - while (readw(ofsAddr + FuncCode) != 0) - if (time_after(jiffies, end)) - return; - if (readw(ofsAddr + FuncCode) != 0 && printk_ratelimit()) - printk(KERN_WARNING "moxa function expired\n"); -} - -static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg) -{ - unsigned long flags; - spin_lock_irqsave(&moxafunc_lock, flags); - writew(arg, ofsAddr + FuncArg); - writew(cmd, ofsAddr + FuncCode); - moxa_wait_finish(ofsAddr); - spin_unlock_irqrestore(&moxafunc_lock, flags); -} - -static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg) -{ - unsigned long flags; - u16 ret; - spin_lock_irqsave(&moxafunc_lock, flags); - writew(arg, ofsAddr + FuncArg); - writew(cmd, ofsAddr + FuncCode); - moxa_wait_finish(ofsAddr); - ret = readw(ofsAddr + FuncArg); - spin_unlock_irqrestore(&moxafunc_lock, flags); - return ret; -} - -static void moxa_low_water_check(void __iomem *ofsAddr) -{ - u16 rptr, wptr, mask, len; - - if (readb(ofsAddr + FlagStat) & Xoff_state) { - rptr = readw(ofsAddr + RXrptr); - wptr = readw(ofsAddr + RXwptr); - mask = readw(ofsAddr + RX_mask); - len = (wptr - rptr) & mask; - if (len <= Low_water) - moxafunc(ofsAddr, FC_SendXon, 0); - } -} - -/* - * TTY operations - */ - -static int moxa_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct moxa_port *ch = tty->driver_data; - void __user *argp = (void __user *)arg; - int status, ret = 0; - - if (tty->index == MAX_PORTS) { - if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE && - cmd != MOXA_GETMSTATUS) - return -EINVAL; - } else if (!ch) - return -ENODEV; - - switch (cmd) { - case MOXA_GETDATACOUNT: - moxaLog.tick = jiffies; - if (copy_to_user(argp, &moxaLog, sizeof(moxaLog))) - ret = -EFAULT; - break; - case MOXA_FLUSH_QUEUE: - MoxaPortFlushData(ch, arg); - break; - case MOXA_GET_IOQUEUE: { - struct moxaq_str __user *argm = argp; - struct moxaq_str tmp; - struct moxa_port *p; - unsigned int i, j; - - for (i = 0; i < MAX_BOARDS; i++) { - p = moxa_boards[i].ports; - for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { - memset(&tmp, 0, sizeof(tmp)); - spin_lock_bh(&moxa_lock); - if (moxa_boards[i].ready) { - tmp.inq = MoxaPortRxQueue(p); - tmp.outq = MoxaPortTxQueue(p); - } - spin_unlock_bh(&moxa_lock); - if (copy_to_user(argm, &tmp, sizeof(tmp))) - return -EFAULT; - } - } - break; - } case MOXA_GET_OQUEUE: - status = MoxaPortTxQueue(ch); - ret = put_user(status, (unsigned long __user *)argp); - break; - case MOXA_GET_IQUEUE: - status = MoxaPortRxQueue(ch); - ret = put_user(status, (unsigned long __user *)argp); - break; - case MOXA_GETMSTATUS: { - struct mxser_mstatus __user *argm = argp; - struct mxser_mstatus tmp; - struct moxa_port *p; - unsigned int i, j; - - for (i = 0; i < MAX_BOARDS; i++) { - p = moxa_boards[i].ports; - for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { - struct tty_struct *ttyp; - memset(&tmp, 0, sizeof(tmp)); - spin_lock_bh(&moxa_lock); - if (!moxa_boards[i].ready) { - spin_unlock_bh(&moxa_lock); - goto copy; - } - - status = MoxaPortLineStatus(p); - spin_unlock_bh(&moxa_lock); - - if (status & 1) - tmp.cts = 1; - if (status & 2) - tmp.dsr = 1; - if (status & 4) - tmp.dcd = 1; - - ttyp = tty_port_tty_get(&p->port); - if (!ttyp || !ttyp->termios) - tmp.cflag = p->cflag; - else - tmp.cflag = ttyp->termios->c_cflag; - tty_kref_put(tty); -copy: - if (copy_to_user(argm, &tmp, sizeof(tmp))) - return -EFAULT; - } - } - break; - } - case TIOCGSERIAL: - mutex_lock(&ch->port.mutex); - ret = moxa_get_serial_info(ch, argp); - mutex_unlock(&ch->port.mutex); - break; - case TIOCSSERIAL: - mutex_lock(&ch->port.mutex); - ret = moxa_set_serial_info(ch, argp); - mutex_unlock(&ch->port.mutex); - break; - default: - ret = -ENOIOCTLCMD; - } - return ret; -} - -static int moxa_break_ctl(struct tty_struct *tty, int state) -{ - struct moxa_port *port = tty->driver_data; - - moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak, - Magic_code); - return 0; -} - -static const struct tty_operations moxa_ops = { - .open = moxa_open, - .close = moxa_close, - .write = moxa_write, - .write_room = moxa_write_room, - .flush_buffer = moxa_flush_buffer, - .chars_in_buffer = moxa_chars_in_buffer, - .ioctl = moxa_ioctl, - .set_termios = moxa_set_termios, - .stop = moxa_stop, - .start = moxa_start, - .hangup = moxa_hangup, - .break_ctl = moxa_break_ctl, - .tiocmget = moxa_tiocmget, - .tiocmset = moxa_tiocmset, -}; - -static const struct tty_port_operations moxa_port_ops = { - .carrier_raised = moxa_carrier_raised, - .dtr_rts = moxa_dtr_rts, - .shutdown = moxa_shutdown, -}; - -static struct tty_driver *moxaDriver; -static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); - -/* - * HW init - */ - -static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model) -{ - switch (brd->boardType) { - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - if (model != 1) - goto err; - break; - case MOXA_BOARD_CP204J: - if (model != 3) - goto err; - break; - default: - if (model != 2) - goto err; - break; - } - return 0; -err: - return -EINVAL; -} - -static int moxa_check_fw(const void *ptr) -{ - const __le16 *lptr = ptr; - - if (*lptr != cpu_to_le16(0x7980)) - return -EINVAL; - - return 0; -} - -static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf, - size_t len) -{ - void __iomem *baseAddr = brd->basemem; - u16 tmp; - - writeb(HW_reset, baseAddr + Control_reg); /* reset */ - msleep(10); - memset_io(baseAddr, 0, 4096); - memcpy_toio(baseAddr, buf, len); /* download BIOS */ - writeb(0, baseAddr + Control_reg); /* restart */ - - msleep(2000); - - switch (brd->boardType) { - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - tmp = readw(baseAddr + C218_key); - if (tmp != C218_KeyCode) - goto err; - break; - case MOXA_BOARD_CP204J: - tmp = readw(baseAddr + C218_key); - if (tmp != CP204J_KeyCode) - goto err; - break; - default: - tmp = readw(baseAddr + C320_key); - if (tmp != C320_KeyCode) - goto err; - tmp = readw(baseAddr + C320_status); - if (tmp != STS_init) { - printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic " - "module not found\n"); - return -EIO; - } - break; - } - - return 0; -err: - printk(KERN_ERR "MOXA: bios upload failed -- board not found\n"); - return -EIO; -} - -static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr, - size_t len) -{ - void __iomem *baseAddr = brd->basemem; - - if (len < 7168) { - printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n"); - return -EINVAL; - } - - writew(len - 7168 - 2, baseAddr + C320bapi_len); - writeb(1, baseAddr + Control_reg); /* Select Page 1 */ - memcpy_toio(baseAddr + DynPage_addr, ptr, 7168); - writeb(2, baseAddr + Control_reg); /* Select Page 2 */ - memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168); - - return 0; -} - -static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr, - size_t len) -{ - void __iomem *baseAddr = brd->basemem; - const __le16 *uptr = ptr; - size_t wlen, len2, j; - unsigned long key, loadbuf, loadlen, checksum, checksum_ok; - unsigned int i, retry; - u16 usum, keycode; - - keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode : - C218_KeyCode; - - switch (brd->boardType) { - case MOXA_BOARD_CP204J: - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - key = C218_key; - loadbuf = C218_LoadBuf; - loadlen = C218DLoad_len; - checksum = C218check_sum; - checksum_ok = C218chksum_ok; - break; - default: - key = C320_key; - keycode = C320_KeyCode; - loadbuf = C320_LoadBuf; - loadlen = C320DLoad_len; - checksum = C320check_sum; - checksum_ok = C320chksum_ok; - break; - } - - usum = 0; - wlen = len >> 1; - for (i = 0; i < wlen; i++) - usum += le16_to_cpu(uptr[i]); - retry = 0; - do { - wlen = len >> 1; - j = 0; - while (wlen) { - len2 = (wlen > 2048) ? 2048 : wlen; - wlen -= len2; - memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1); - j += len2 << 1; - - writew(len2, baseAddr + loadlen); - writew(0, baseAddr + key); - for (i = 0; i < 100; i++) { - if (readw(baseAddr + key) == keycode) - break; - msleep(10); - } - if (readw(baseAddr + key) != keycode) - return -EIO; - } - writew(0, baseAddr + loadlen); - writew(usum, baseAddr + checksum); - writew(0, baseAddr + key); - for (i = 0; i < 100; i++) { - if (readw(baseAddr + key) == keycode) - break; - msleep(10); - } - retry++; - } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3)); - if (readb(baseAddr + checksum_ok) != 1) - return -EIO; - - writew(0, baseAddr + key); - for (i = 0; i < 600; i++) { - if (readw(baseAddr + Magic_no) == Magic_code) - break; - msleep(10); - } - if (readw(baseAddr + Magic_no) != Magic_code) - return -EIO; - - if (MOXA_IS_320(brd)) { - if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */ - writew(0x3800, baseAddr + TMS320_PORT1); - writew(0x3900, baseAddr + TMS320_PORT2); - writew(28499, baseAddr + TMS320_CLOCK); - } else { - writew(0x3200, baseAddr + TMS320_PORT1); - writew(0x3400, baseAddr + TMS320_PORT2); - writew(19999, baseAddr + TMS320_CLOCK); - } - } - writew(1, baseAddr + Disable_IRQ); - writew(0, baseAddr + Magic_no); - for (i = 0; i < 500; i++) { - if (readw(baseAddr + Magic_no) == Magic_code) - break; - msleep(10); - } - if (readw(baseAddr + Magic_no) != Magic_code) - return -EIO; - - if (MOXA_IS_320(brd)) { - j = readw(baseAddr + Module_cnt); - if (j <= 0) - return -EIO; - brd->numPorts = j * 8; - writew(j, baseAddr + Module_no); - writew(0, baseAddr + Magic_no); - for (i = 0; i < 600; i++) { - if (readw(baseAddr + Magic_no) == Magic_code) - break; - msleep(10); - } - if (readw(baseAddr + Magic_no) != Magic_code) - return -EIO; - } - brd->intNdx = baseAddr + IRQindex; - brd->intPend = baseAddr + IRQpending; - brd->intTable = baseAddr + IRQtable; - - return 0; -} - -static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr, - size_t len) -{ - void __iomem *ofsAddr, *baseAddr = brd->basemem; - struct moxa_port *port; - int retval, i; - - if (len % 2) { - printk(KERN_ERR "MOXA: bios length is not even\n"); - return -EINVAL; - } - - retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */ - if (retval) - return retval; - - switch (brd->boardType) { - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - case MOXA_BOARD_CP204J: - port = brd->ports; - for (i = 0; i < brd->numPorts; i++, port++) { - port->board = brd; - port->DCDState = 0; - port->tableAddr = baseAddr + Extern_table + - Extern_size * i; - ofsAddr = port->tableAddr; - writew(C218rx_mask, ofsAddr + RX_mask); - writew(C218tx_mask, ofsAddr + TX_mask); - writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb); - writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb); - - writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb); - - } - break; - default: - port = brd->ports; - for (i = 0; i < brd->numPorts; i++, port++) { - port->board = brd; - port->DCDState = 0; - port->tableAddr = baseAddr + Extern_table + - Extern_size * i; - ofsAddr = port->tableAddr; - switch (brd->numPorts) { - case 8: - writew(C320p8rx_mask, ofsAddr + RX_mask); - writew(C320p8tx_mask, ofsAddr + TX_mask); - writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb); - writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb); - writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb); - - break; - case 16: - writew(C320p16rx_mask, ofsAddr + RX_mask); - writew(C320p16tx_mask, ofsAddr + TX_mask); - writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb); - writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb); - writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb); - break; - - case 24: - writew(C320p24rx_mask, ofsAddr + RX_mask); - writew(C320p24tx_mask, ofsAddr + TX_mask); - writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb); - writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb); - writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); - break; - case 32: - writew(C320p32rx_mask, ofsAddr + RX_mask); - writew(C320p32tx_mask, ofsAddr + TX_mask); - writew(C320p32tx_ofs, ofsAddr + Ofs_txb); - writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb); - writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb); - writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); - break; - } - } - break; - } - return 0; -} - -static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw) -{ - const void *ptr = fw->data; - char rsn[64]; - u16 lens[5]; - size_t len; - unsigned int a, lenp, lencnt; - int ret = -EINVAL; - struct { - __le32 magic; /* 0x34303430 */ - u8 reserved1[2]; - u8 type; /* UNIX = 3 */ - u8 model; /* C218T=1, C320T=2, CP204=3 */ - u8 reserved2[8]; - __le16 len[5]; - } const *hdr = ptr; - - BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens)); - - if (fw->size < MOXA_FW_HDRLEN) { - strcpy(rsn, "too short (even header won't fit)"); - goto err; - } - if (hdr->magic != cpu_to_le32(0x30343034)) { - sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic)); - goto err; - } - if (hdr->type != 3) { - sprintf(rsn, "not for linux, type is %u", hdr->type); - goto err; - } - if (moxa_check_fw_model(brd, hdr->model)) { - sprintf(rsn, "not for this card, model is %u", hdr->model); - goto err; - } - - len = MOXA_FW_HDRLEN; - lencnt = hdr->model == 2 ? 5 : 3; - for (a = 0; a < ARRAY_SIZE(lens); a++) { - lens[a] = le16_to_cpu(hdr->len[a]); - if (lens[a] && len + lens[a] <= fw->size && - moxa_check_fw(&fw->data[len])) - printk(KERN_WARNING "MOXA firmware: unexpected input " - "at offset %u, but going on\n", (u32)len); - if (!lens[a] && a < lencnt) { - sprintf(rsn, "too few entries in fw file"); - goto err; - } - len += lens[a]; - } - - if (len != fw->size) { - sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size, - (u32)len); - goto err; - } - - ptr += MOXA_FW_HDRLEN; - lenp = 0; /* bios */ - - strcpy(rsn, "read above"); - - ret = moxa_load_bios(brd, ptr, lens[lenp]); - if (ret) - goto err; - - /* we skip the tty section (lens[1]), since we don't need it */ - ptr += lens[lenp] + lens[lenp + 1]; - lenp += 2; /* comm */ - - if (hdr->model == 2) { - ret = moxa_load_320b(brd, ptr, lens[lenp]); - if (ret) - goto err; - /* skip another tty */ - ptr += lens[lenp] + lens[lenp + 1]; - lenp += 2; - } - - ret = moxa_load_code(brd, ptr, lens[lenp]); - if (ret) - goto err; - - return 0; -err: - printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn); - return ret; -} - -static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) -{ - const struct firmware *fw; - const char *file; - struct moxa_port *p; - unsigned int i; - int ret; - - brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports), - GFP_KERNEL); - if (brd->ports == NULL) { - printk(KERN_ERR "cannot allocate memory for ports\n"); - ret = -ENOMEM; - goto err; - } - - for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) { - tty_port_init(&p->port); - p->port.ops = &moxa_port_ops; - p->type = PORT_16550A; - p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; - } - - switch (brd->boardType) { - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - file = "c218tunx.cod"; - break; - case MOXA_BOARD_CP204J: - file = "cp204unx.cod"; - break; - default: - file = "c320tunx.cod"; - break; - } - - ret = request_firmware(&fw, file, dev); - if (ret) { - printk(KERN_ERR "MOXA: request_firmware failed. Make sure " - "you've placed '%s' file into your firmware " - "loader directory (e.g. /lib/firmware)\n", - file); - goto err_free; - } - - ret = moxa_load_fw(brd, fw); - - release_firmware(fw); - - if (ret) - goto err_free; - - spin_lock_bh(&moxa_lock); - brd->ready = 1; - if (!timer_pending(&moxaTimer)) - mod_timer(&moxaTimer, jiffies + HZ / 50); - spin_unlock_bh(&moxa_lock); - - return 0; -err_free: - kfree(brd->ports); -err: - return ret; -} - -static void moxa_board_deinit(struct moxa_board_conf *brd) -{ - unsigned int a, opened; - - mutex_lock(&moxa_openlock); - spin_lock_bh(&moxa_lock); - brd->ready = 0; - spin_unlock_bh(&moxa_lock); - - /* pci hot-un-plug support */ - for (a = 0; a < brd->numPorts; a++) - if (brd->ports[a].port.flags & ASYNC_INITIALIZED) { - struct tty_struct *tty = tty_port_tty_get( - &brd->ports[a].port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } - } - while (1) { - opened = 0; - for (a = 0; a < brd->numPorts; a++) - if (brd->ports[a].port.flags & ASYNC_INITIALIZED) - opened++; - mutex_unlock(&moxa_openlock); - if (!opened) - break; - msleep(50); - mutex_lock(&moxa_openlock); - } - - iounmap(brd->basemem); - brd->basemem = NULL; - kfree(brd->ports); -} - -#ifdef CONFIG_PCI -static int __devinit moxa_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct moxa_board_conf *board; - unsigned int i; - int board_type = ent->driver_data; - int retval; - - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "can't enable pci device\n"); - goto err; - } - - for (i = 0; i < MAX_BOARDS; i++) - if (moxa_boards[i].basemem == NULL) - break; - - retval = -ENODEV; - if (i >= MAX_BOARDS) { - dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards " - "found. Board is ignored.\n", MAX_BOARDS); - goto err; - } - - board = &moxa_boards[i]; - - retval = pci_request_region(pdev, 2, "moxa-base"); - if (retval) { - dev_err(&pdev->dev, "can't request pci region 2\n"); - goto err; - } - - board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000); - if (board->basemem == NULL) { - dev_err(&pdev->dev, "can't remap io space 2\n"); - goto err_reg; - } - - board->boardType = board_type; - switch (board_type) { - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - board->numPorts = 8; - break; - - case MOXA_BOARD_CP204J: - board->numPorts = 4; - break; - default: - board->numPorts = 0; - break; - } - board->busType = MOXA_BUS_TYPE_PCI; - - retval = moxa_init_board(board, &pdev->dev); - if (retval) - goto err_base; - - pci_set_drvdata(pdev, board); - - dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n", - moxa_brdname[board_type - 1], board->numPorts); - - return 0; -err_base: - iounmap(board->basemem); - board->basemem = NULL; -err_reg: - pci_release_region(pdev, 2); -err: - return retval; -} - -static void __devexit moxa_pci_remove(struct pci_dev *pdev) -{ - struct moxa_board_conf *brd = pci_get_drvdata(pdev); - - moxa_board_deinit(brd); - - pci_release_region(pdev, 2); -} - -static struct pci_driver moxa_pci_driver = { - .name = "moxa", - .id_table = moxa_pcibrds, - .probe = moxa_pci_probe, - .remove = __devexit_p(moxa_pci_remove) -}; -#endif /* CONFIG_PCI */ - -static int __init moxa_init(void) -{ - unsigned int isabrds = 0; - int retval = 0; - struct moxa_board_conf *brd = moxa_boards; - unsigned int i; - - printk(KERN_INFO "MOXA Intellio family driver version %s\n", - MOXA_VERSION); - moxaDriver = alloc_tty_driver(MAX_PORTS + 1); - if (!moxaDriver) - return -ENOMEM; - - moxaDriver->owner = THIS_MODULE; - moxaDriver->name = "ttyMX"; - moxaDriver->major = ttymajor; - moxaDriver->minor_start = 0; - moxaDriver->type = TTY_DRIVER_TYPE_SERIAL; - moxaDriver->subtype = SERIAL_TYPE_NORMAL; - moxaDriver->init_termios = tty_std_termios; - moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; - moxaDriver->init_termios.c_ispeed = 9600; - moxaDriver->init_termios.c_ospeed = 9600; - moxaDriver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(moxaDriver, &moxa_ops); - - if (tty_register_driver(moxaDriver)) { - printk(KERN_ERR "can't register MOXA Smartio tty driver!\n"); - put_tty_driver(moxaDriver); - return -1; - } - - /* Find the boards defined from module args. */ - - for (i = 0; i < MAX_BOARDS; i++) { - if (!baseaddr[i]) - break; - if (type[i] == MOXA_BOARD_C218_ISA || - type[i] == MOXA_BOARD_C320_ISA) { - pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n", - isabrds + 1, moxa_brdname[type[i] - 1], - baseaddr[i]); - brd->boardType = type[i]; - brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 : - numports[i]; - brd->busType = MOXA_BUS_TYPE_ISA; - brd->basemem = ioremap_nocache(baseaddr[i], 0x4000); - if (!brd->basemem) { - printk(KERN_ERR "MOXA: can't remap %lx\n", - baseaddr[i]); - continue; - } - if (moxa_init_board(brd, NULL)) { - iounmap(brd->basemem); - brd->basemem = NULL; - continue; - } - - printk(KERN_INFO "MOXA isa board found at 0x%.8lu and " - "ready (%u ports, firmware loaded)\n", - baseaddr[i], brd->numPorts); - - brd++; - isabrds++; - } - } - -#ifdef CONFIG_PCI - retval = pci_register_driver(&moxa_pci_driver); - if (retval) { - printk(KERN_ERR "Can't register MOXA pci driver!\n"); - if (isabrds) - retval = 0; - } -#endif - - return retval; -} - -static void __exit moxa_exit(void) -{ - unsigned int i; - -#ifdef CONFIG_PCI - pci_unregister_driver(&moxa_pci_driver); -#endif - - for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */ - if (moxa_boards[i].ready) - moxa_board_deinit(&moxa_boards[i]); - - del_timer_sync(&moxaTimer); - - if (tty_unregister_driver(moxaDriver)) - printk(KERN_ERR "Couldn't unregister MOXA Intellio family " - "serial driver\n"); - put_tty_driver(moxaDriver); -} - -module_init(moxa_init); -module_exit(moxa_exit); - -static void moxa_shutdown(struct tty_port *port) -{ - struct moxa_port *ch = container_of(port, struct moxa_port, port); - MoxaPortDisable(ch); - MoxaPortFlushData(ch, 2); - clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); -} - -static int moxa_carrier_raised(struct tty_port *port) -{ - struct moxa_port *ch = container_of(port, struct moxa_port, port); - int dcd; - - spin_lock_irq(&port->lock); - dcd = ch->DCDState; - spin_unlock_irq(&port->lock); - return dcd; -} - -static void moxa_dtr_rts(struct tty_port *port, int onoff) -{ - struct moxa_port *ch = container_of(port, struct moxa_port, port); - MoxaPortLineCtrl(ch, onoff, onoff); -} - - -static int moxa_open(struct tty_struct *tty, struct file *filp) -{ - struct moxa_board_conf *brd; - struct moxa_port *ch; - int port; - int retval; - - port = tty->index; - if (port == MAX_PORTS) { - return capable(CAP_SYS_ADMIN) ? 0 : -EPERM; - } - if (mutex_lock_interruptible(&moxa_openlock)) - return -ERESTARTSYS; - brd = &moxa_boards[port / MAX_PORTS_PER_BOARD]; - if (!brd->ready) { - mutex_unlock(&moxa_openlock); - return -ENODEV; - } - - if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) { - mutex_unlock(&moxa_openlock); - return -ENODEV; - } - - ch = &brd->ports[port % MAX_PORTS_PER_BOARD]; - ch->port.count++; - tty->driver_data = ch; - tty_port_tty_set(&ch->port, tty); - mutex_lock(&ch->port.mutex); - if (!(ch->port.flags & ASYNC_INITIALIZED)) { - ch->statusflags = 0; - moxa_set_tty_param(tty, tty->termios); - MoxaPortLineCtrl(ch, 1, 1); - MoxaPortEnable(ch); - MoxaSetFifo(ch, ch->type == PORT_16550A); - ch->port.flags |= ASYNC_INITIALIZED; - } - mutex_unlock(&ch->port.mutex); - mutex_unlock(&moxa_openlock); - - retval = tty_port_block_til_ready(&ch->port, tty, filp); - if (retval == 0) - set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags); - return retval; -} - -static void moxa_close(struct tty_struct *tty, struct file *filp) -{ - struct moxa_port *ch = tty->driver_data; - ch->cflag = tty->termios->c_cflag; - tty_port_close(&ch->port, tty, filp); -} - -static int moxa_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct moxa_port *ch = tty->driver_data; - int len; - - if (ch == NULL) - return 0; - - spin_lock_bh(&moxa_lock); - len = MoxaPortWriteData(tty, buf, count); - spin_unlock_bh(&moxa_lock); - - set_bit(LOWWAIT, &ch->statusflags); - return len; -} - -static int moxa_write_room(struct tty_struct *tty) -{ - struct moxa_port *ch; - - if (tty->stopped) - return 0; - ch = tty->driver_data; - if (ch == NULL) - return 0; - return MoxaPortTxFree(ch); -} - -static void moxa_flush_buffer(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - if (ch == NULL) - return; - MoxaPortFlushData(ch, 1); - tty_wakeup(tty); -} - -static int moxa_chars_in_buffer(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - int chars; - - chars = MoxaPortTxQueue(ch); - if (chars) - /* - * Make it possible to wakeup anything waiting for output - * in tty_ioctl.c, etc. - */ - set_bit(EMPTYWAIT, &ch->statusflags); - return chars; -} - -static int moxa_tiocmget(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - int flag = 0, dtr, rts; - - MoxaPortGetLineOut(ch, &dtr, &rts); - if (dtr) - flag |= TIOCM_DTR; - if (rts) - flag |= TIOCM_RTS; - dtr = MoxaPortLineStatus(ch); - if (dtr & 1) - flag |= TIOCM_CTS; - if (dtr & 2) - flag |= TIOCM_DSR; - if (dtr & 4) - flag |= TIOCM_CD; - return flag; -} - -static int moxa_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct moxa_port *ch; - int port; - int dtr, rts; - - port = tty->index; - mutex_lock(&moxa_openlock); - ch = tty->driver_data; - if (!ch) { - mutex_unlock(&moxa_openlock); - return -EINVAL; - } - - MoxaPortGetLineOut(ch, &dtr, &rts); - if (set & TIOCM_RTS) - rts = 1; - if (set & TIOCM_DTR) - dtr = 1; - if (clear & TIOCM_RTS) - rts = 0; - if (clear & TIOCM_DTR) - dtr = 0; - MoxaPortLineCtrl(ch, dtr, rts); - mutex_unlock(&moxa_openlock); - return 0; -} - -static void moxa_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct moxa_port *ch = tty->driver_data; - - if (ch == NULL) - return; - moxa_set_tty_param(tty, old_termios); - if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty)) - wake_up_interruptible(&ch->port.open_wait); -} - -static void moxa_stop(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - if (ch == NULL) - return; - MoxaPortTxDisable(ch); - set_bit(TXSTOPPED, &ch->statusflags); -} - - -static void moxa_start(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - if (ch == NULL) - return; - - if (!(ch->statusflags & TXSTOPPED)) - return; - - MoxaPortTxEnable(ch); - clear_bit(TXSTOPPED, &ch->statusflags); -} - -static void moxa_hangup(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - tty_port_hangup(&ch->port); -} - -static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) -{ - struct tty_struct *tty; - unsigned long flags; - dcd = !!dcd; - - spin_lock_irqsave(&p->port.lock, flags); - if (dcd != p->DCDState) { - p->DCDState = dcd; - spin_unlock_irqrestore(&p->port.lock, flags); - tty = tty_port_tty_get(&p->port); - if (tty && C_CLOCAL(tty) && !dcd) - tty_hangup(tty); - tty_kref_put(tty); - } - else - spin_unlock_irqrestore(&p->port.lock, flags); -} - -static int moxa_poll_port(struct moxa_port *p, unsigned int handle, - u16 __iomem *ip) -{ - struct tty_struct *tty = tty_port_tty_get(&p->port); - void __iomem *ofsAddr; - unsigned int inited = p->port.flags & ASYNC_INITIALIZED; - u16 intr; - - if (tty) { - if (test_bit(EMPTYWAIT, &p->statusflags) && - MoxaPortTxQueue(p) == 0) { - clear_bit(EMPTYWAIT, &p->statusflags); - tty_wakeup(tty); - } - if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped && - MoxaPortTxQueue(p) <= WAKEUP_CHARS) { - clear_bit(LOWWAIT, &p->statusflags); - tty_wakeup(tty); - } - - if (inited && !test_bit(TTY_THROTTLED, &tty->flags) && - MoxaPortRxQueue(p) > 0) { /* RX */ - MoxaPortReadData(p); - tty_schedule_flip(tty); - } - } else { - clear_bit(EMPTYWAIT, &p->statusflags); - MoxaPortFlushData(p, 0); /* flush RX */ - } - - if (!handle) /* nothing else to do */ - goto put; - - intr = readw(ip); /* port irq status */ - if (intr == 0) - goto put; - - writew(0, ip); /* ACK port */ - ofsAddr = p->tableAddr; - if (intr & IntrTx) /* disable tx intr */ - writew(readw(ofsAddr + HostStat) & ~WakeupTx, - ofsAddr + HostStat); - - if (!inited) - goto put; - - if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */ - tty_insert_flip_char(tty, 0, TTY_BREAK); - tty_schedule_flip(tty); - } - - if (intr & IntrLine) - moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state); -put: - tty_kref_put(tty); - - return 0; -} - -static void moxa_poll(unsigned long ignored) -{ - struct moxa_board_conf *brd; - u16 __iomem *ip; - unsigned int card, port, served = 0; - - spin_lock(&moxa_lock); - for (card = 0; card < MAX_BOARDS; card++) { - brd = &moxa_boards[card]; - if (!brd->ready) - continue; - - served++; - - ip = NULL; - if (readb(brd->intPend) == 0xff) - ip = brd->intTable + readb(brd->intNdx); - - for (port = 0; port < brd->numPorts; port++) - moxa_poll_port(&brd->ports[port], !!ip, ip + port); - - if (ip) - writeb(0, brd->intPend); /* ACK */ - - if (moxaLowWaterChk) { - struct moxa_port *p = brd->ports; - for (port = 0; port < brd->numPorts; port++, p++) - if (p->lowChkFlag) { - p->lowChkFlag = 0; - moxa_low_water_check(p->tableAddr); - } - } - } - moxaLowWaterChk = 0; - - if (served) - mod_timer(&moxaTimer, jiffies + HZ / 50); - spin_unlock(&moxa_lock); -} - -/******************************************************************************/ - -static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios) -{ - register struct ktermios *ts = tty->termios; - struct moxa_port *ch = tty->driver_data; - int rts, cts, txflow, rxflow, xany, baud; - - rts = cts = txflow = rxflow = xany = 0; - if (ts->c_cflag & CRTSCTS) - rts = cts = 1; - if (ts->c_iflag & IXON) - txflow = 1; - if (ts->c_iflag & IXOFF) - rxflow = 1; - if (ts->c_iflag & IXANY) - xany = 1; - - /* Clear the features we don't support */ - ts->c_cflag &= ~CMSPAR; - MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany); - baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty)); - if (baud == -1) - baud = tty_termios_baud_rate(old_termios); - /* Not put the baud rate into the termios data */ - tty_encode_baud_rate(tty, baud, baud); -} - -/***************************************************************************** - * Driver level functions: * - *****************************************************************************/ - -static void MoxaPortFlushData(struct moxa_port *port, int mode) -{ - void __iomem *ofsAddr; - if (mode < 0 || mode > 2) - return; - ofsAddr = port->tableAddr; - moxafunc(ofsAddr, FC_FlushQueue, mode); - if (mode != 1) { - port->lowChkFlag = 0; - moxa_low_water_check(ofsAddr); - } -} - -/* - * Moxa Port Number Description: - * - * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And, - * the port number using in MOXA driver functions will be 0 to 31 for - * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96 - * to 127 for fourth. For example, if you setup three MOXA boards, - * first board is C218, second board is C320-16 and third board is - * C320-32. The port number of first board (C218 - 8 ports) is from - * 0 to 7. The port number of second board (C320 - 16 ports) is form - * 32 to 47. The port number of third board (C320 - 32 ports) is from - * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to - * 127 will be invalid. - * - * - * Moxa Functions Description: - * - * Function 1: Driver initialization routine, this routine must be - * called when initialized driver. - * Syntax: - * void MoxaDriverInit(); - * - * - * Function 2: Moxa driver private IOCTL command processing. - * Syntax: - * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port); - * - * unsigned int cmd : IOCTL command - * unsigned long arg : IOCTL argument - * int port : port number (0 - 127) - * - * return: 0 (OK) - * -EINVAL - * -ENOIOCTLCMD - * - * - * Function 6: Enable this port to start Tx/Rx data. - * Syntax: - * void MoxaPortEnable(int port); - * int port : port number (0 - 127) - * - * - * Function 7: Disable this port - * Syntax: - * void MoxaPortDisable(int port); - * int port : port number (0 - 127) - * - * - * Function 10: Setting baud rate of this port. - * Syntax: - * speed_t MoxaPortSetBaud(int port, speed_t baud); - * int port : port number (0 - 127) - * long baud : baud rate (50 - 115200) - * - * return: 0 : this port is invalid or baud < 50 - * 50 - 115200 : the real baud rate set to the port, if - * the argument baud is large than maximun - * available baud rate, the real setting - * baud rate will be the maximun baud rate. - * - * - * Function 12: Configure the port. - * Syntax: - * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud); - * int port : port number (0 - 127) - * struct ktermios * termio : termio structure pointer - * speed_t baud : baud rate - * - * return: -1 : this port is invalid or termio == NULL - * 0 : setting O.K. - * - * - * Function 13: Get the DTR/RTS state of this port. - * Syntax: - * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); - * int port : port number (0 - 127) - * int * dtrState : pointer to INT to receive the current DTR - * state. (if NULL, this function will not - * write to this address) - * int * rtsState : pointer to INT to receive the current RTS - * state. (if NULL, this function will not - * write to this address) - * - * return: -1 : this port is invalid - * 0 : O.K. - * - * - * Function 14: Setting the DTR/RTS output state of this port. - * Syntax: - * void MoxaPortLineCtrl(int port, int dtrState, int rtsState); - * int port : port number (0 - 127) - * int dtrState : DTR output state (0: off, 1: on) - * int rtsState : RTS output state (0: off, 1: on) - * - * - * Function 15: Setting the flow control of this port. - * Syntax: - * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow, - * int txFlow,int xany); - * int port : port number (0 - 127) - * int rtsFlow : H/W RTS flow control (0: no, 1: yes) - * int ctsFlow : H/W CTS flow control (0: no, 1: yes) - * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes) - * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes) - * int xany : S/W XANY flow control (0: no, 1: yes) - * - * - * Function 16: Get ths line status of this port - * Syntax: - * int MoxaPortLineStatus(int port); - * int port : port number (0 - 127) - * - * return: Bit 0 - CTS state (0: off, 1: on) - * Bit 1 - DSR state (0: off, 1: on) - * Bit 2 - DCD state (0: off, 1: on) - * - * - * Function 19: Flush the Rx/Tx buffer data of this port. - * Syntax: - * void MoxaPortFlushData(int port, int mode); - * int port : port number (0 - 127) - * int mode - * 0 : flush the Rx buffer - * 1 : flush the Tx buffer - * 2 : flush the Rx and Tx buffer - * - * - * Function 20: Write data. - * Syntax: - * int MoxaPortWriteData(int port, unsigned char * buffer, int length); - * int port : port number (0 - 127) - * unsigned char * buffer : pointer to write data buffer. - * int length : write data length - * - * return: 0 - length : real write data length - * - * - * Function 21: Read data. - * Syntax: - * int MoxaPortReadData(int port, struct tty_struct *tty); - * int port : port number (0 - 127) - * struct tty_struct *tty : tty for data - * - * return: 0 - length : real read data length - * - * - * Function 24: Get the Tx buffer current queued data bytes - * Syntax: - * int MoxaPortTxQueue(int port); - * int port : port number (0 - 127) - * - * return: .. : Tx buffer current queued data bytes - * - * - * Function 25: Get the Tx buffer current free space - * Syntax: - * int MoxaPortTxFree(int port); - * int port : port number (0 - 127) - * - * return: .. : Tx buffer current free space - * - * - * Function 26: Get the Rx buffer current queued data bytes - * Syntax: - * int MoxaPortRxQueue(int port); - * int port : port number (0 - 127) - * - * return: .. : Rx buffer current queued data bytes - * - * - * Function 28: Disable port data transmission. - * Syntax: - * void MoxaPortTxDisable(int port); - * int port : port number (0 - 127) - * - * - * Function 29: Enable port data transmission. - * Syntax: - * void MoxaPortTxEnable(int port); - * int port : port number (0 - 127) - * - * - * Function 31: Get the received BREAK signal count and reset it. - * Syntax: - * int MoxaPortResetBrkCnt(int port); - * int port : port number (0 - 127) - * - * return: 0 - .. : BREAK signal count - * - * - */ - -static void MoxaPortEnable(struct moxa_port *port) -{ - void __iomem *ofsAddr; - u16 lowwater = 512; - - ofsAddr = port->tableAddr; - writew(lowwater, ofsAddr + Low_water); - if (MOXA_IS_320(port->board)) - moxafunc(ofsAddr, FC_SetBreakIrq, 0); - else - writew(readw(ofsAddr + HostStat) | WakeupBreak, - ofsAddr + HostStat); - - moxafunc(ofsAddr, FC_SetLineIrq, Magic_code); - moxafunc(ofsAddr, FC_FlushQueue, 2); - - moxafunc(ofsAddr, FC_EnableCH, Magic_code); - MoxaPortLineStatus(port); -} - -static void MoxaPortDisable(struct moxa_port *port) -{ - void __iomem *ofsAddr = port->tableAddr; - - moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */ - moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code); - writew(0, ofsAddr + HostStat); - moxafunc(ofsAddr, FC_DisableCH, Magic_code); -} - -static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud) -{ - void __iomem *ofsAddr = port->tableAddr; - unsigned int clock, val; - speed_t max; - - max = MOXA_IS_320(port->board) ? 460800 : 921600; - if (baud < 50) - return 0; - if (baud > max) - baud = max; - clock = 921600; - val = clock / baud; - moxafunc(ofsAddr, FC_SetBaud, val); - baud = clock / val; - return baud; -} - -static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio, - speed_t baud) -{ - void __iomem *ofsAddr; - tcflag_t cflag; - tcflag_t mode = 0; - - ofsAddr = port->tableAddr; - cflag = termio->c_cflag; /* termio->c_cflag */ - - mode = termio->c_cflag & CSIZE; - if (mode == CS5) - mode = MX_CS5; - else if (mode == CS6) - mode = MX_CS6; - else if (mode == CS7) - mode = MX_CS7; - else if (mode == CS8) - mode = MX_CS8; - - if (termio->c_cflag & CSTOPB) { - if (mode == MX_CS5) - mode |= MX_STOP15; - else - mode |= MX_STOP2; - } else - mode |= MX_STOP1; - - if (termio->c_cflag & PARENB) { - if (termio->c_cflag & PARODD) - mode |= MX_PARODD; - else - mode |= MX_PAREVEN; - } else - mode |= MX_PARNONE; - - moxafunc(ofsAddr, FC_SetDataMode, (u16)mode); - - if (MOXA_IS_320(port->board) && baud >= 921600) - return -1; - - baud = MoxaPortSetBaud(port, baud); - - if (termio->c_iflag & (IXON | IXOFF | IXANY)) { - spin_lock_irq(&moxafunc_lock); - writeb(termio->c_cc[VSTART], ofsAddr + FuncArg); - writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1); - writeb(FC_SetXonXoff, ofsAddr + FuncCode); - moxa_wait_finish(ofsAddr); - spin_unlock_irq(&moxafunc_lock); - - } - return baud; -} - -static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState, - int *rtsState) -{ - if (dtrState) - *dtrState = !!(port->lineCtrl & DTR_ON); - if (rtsState) - *rtsState = !!(port->lineCtrl & RTS_ON); - - return 0; -} - -static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts) -{ - u8 mode = 0; - - if (dtr) - mode |= DTR_ON; - if (rts) - mode |= RTS_ON; - port->lineCtrl = mode; - moxafunc(port->tableAddr, FC_LineControl, mode); -} - -static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts, - int txflow, int rxflow, int txany) -{ - int mode = 0; - - if (rts) - mode |= RTS_FlowCtl; - if (cts) - mode |= CTS_FlowCtl; - if (txflow) - mode |= Tx_FlowCtl; - if (rxflow) - mode |= Rx_FlowCtl; - if (txany) - mode |= IXM_IXANY; - moxafunc(port->tableAddr, FC_SetFlowCtl, mode); -} - -static int MoxaPortLineStatus(struct moxa_port *port) -{ - void __iomem *ofsAddr; - int val; - - ofsAddr = port->tableAddr; - if (MOXA_IS_320(port->board)) - val = moxafuncret(ofsAddr, FC_LineStatus, 0); - else - val = readw(ofsAddr + FlagStat) >> 4; - val &= 0x0B; - if (val & 8) - val |= 4; - moxa_new_dcdstate(port, val & 8); - val &= 7; - return val; -} - -static int MoxaPortWriteData(struct tty_struct *tty, - const unsigned char *buffer, int len) -{ - struct moxa_port *port = tty->driver_data; - void __iomem *baseAddr, *ofsAddr, *ofs; - unsigned int c, total; - u16 head, tail, tx_mask, spage, epage; - u16 pageno, pageofs, bufhead; - - ofsAddr = port->tableAddr; - baseAddr = port->board->basemem; - tx_mask = readw(ofsAddr + TX_mask); - spage = readw(ofsAddr + Page_txb); - epage = readw(ofsAddr + EndPage_txb); - tail = readw(ofsAddr + TXwptr); - head = readw(ofsAddr + TXrptr); - c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask); - if (c > len) - c = len; - moxaLog.txcnt[port->port.tty->index] += c; - total = c; - if (spage == epage) { - bufhead = readw(ofsAddr + Ofs_txb); - writew(spage, baseAddr + Control_reg); - while (c > 0) { - if (head > tail) - len = head - tail - 1; - else - len = tx_mask + 1 - tail; - len = (c > len) ? len : c; - ofs = baseAddr + DynPage_addr + bufhead + tail; - memcpy_toio(ofs, buffer, len); - buffer += len; - tail = (tail + len) & tx_mask; - c -= len; - } - } else { - pageno = spage + (tail >> 13); - pageofs = tail & Page_mask; - while (c > 0) { - len = Page_size - pageofs; - if (len > c) - len = c; - writeb(pageno, baseAddr + Control_reg); - ofs = baseAddr + DynPage_addr + pageofs; - memcpy_toio(ofs, buffer, len); - buffer += len; - if (++pageno == epage) - pageno = spage; - pageofs = 0; - c -= len; - } - tail = (tail + total) & tx_mask; - } - writew(tail, ofsAddr + TXwptr); - writeb(1, ofsAddr + CD180TXirq); /* start to send */ - return total; -} - -static int MoxaPortReadData(struct moxa_port *port) -{ - struct tty_struct *tty = port->port.tty; - unsigned char *dst; - void __iomem *baseAddr, *ofsAddr, *ofs; - unsigned int count, len, total; - u16 tail, rx_mask, spage, epage; - u16 pageno, pageofs, bufhead, head; - - ofsAddr = port->tableAddr; - baseAddr = port->board->basemem; - head = readw(ofsAddr + RXrptr); - tail = readw(ofsAddr + RXwptr); - rx_mask = readw(ofsAddr + RX_mask); - spage = readw(ofsAddr + Page_rxb); - epage = readw(ofsAddr + EndPage_rxb); - count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1); - if (count == 0) - return 0; - - total = count; - moxaLog.rxcnt[tty->index] += total; - if (spage == epage) { - bufhead = readw(ofsAddr + Ofs_rxb); - writew(spage, baseAddr + Control_reg); - while (count > 0) { - ofs = baseAddr + DynPage_addr + bufhead + head; - len = (tail >= head) ? (tail - head) : - (rx_mask + 1 - head); - len = tty_prepare_flip_string(tty, &dst, - min(len, count)); - memcpy_fromio(dst, ofs, len); - head = (head + len) & rx_mask; - count -= len; - } - } else { - pageno = spage + (head >> 13); - pageofs = head & Page_mask; - while (count > 0) { - writew(pageno, baseAddr + Control_reg); - ofs = baseAddr + DynPage_addr + pageofs; - len = tty_prepare_flip_string(tty, &dst, - min(Page_size - pageofs, count)); - memcpy_fromio(dst, ofs, len); - - count -= len; - pageofs = (pageofs + len) & Page_mask; - if (pageofs == 0 && ++pageno == epage) - pageno = spage; - } - head = (head + total) & rx_mask; - } - writew(head, ofsAddr + RXrptr); - if (readb(ofsAddr + FlagStat) & Xoff_state) { - moxaLowWaterChk = 1; - port->lowChkFlag = 1; - } - return total; -} - - -static int MoxaPortTxQueue(struct moxa_port *port) -{ - void __iomem *ofsAddr = port->tableAddr; - u16 rptr, wptr, mask; - - rptr = readw(ofsAddr + TXrptr); - wptr = readw(ofsAddr + TXwptr); - mask = readw(ofsAddr + TX_mask); - return (wptr - rptr) & mask; -} - -static int MoxaPortTxFree(struct moxa_port *port) -{ - void __iomem *ofsAddr = port->tableAddr; - u16 rptr, wptr, mask; - - rptr = readw(ofsAddr + TXrptr); - wptr = readw(ofsAddr + TXwptr); - mask = readw(ofsAddr + TX_mask); - return mask - ((wptr - rptr) & mask); -} - -static int MoxaPortRxQueue(struct moxa_port *port) -{ - void __iomem *ofsAddr = port->tableAddr; - u16 rptr, wptr, mask; - - rptr = readw(ofsAddr + RXrptr); - wptr = readw(ofsAddr + RXwptr); - mask = readw(ofsAddr + RX_mask); - return (wptr - rptr) & mask; -} - -static void MoxaPortTxDisable(struct moxa_port *port) -{ - moxafunc(port->tableAddr, FC_SetXoffState, Magic_code); -} - -static void MoxaPortTxEnable(struct moxa_port *port) -{ - moxafunc(port->tableAddr, FC_SetXonState, Magic_code); -} - -static int moxa_get_serial_info(struct moxa_port *info, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp = { - .type = info->type, - .line = info->port.tty->index, - .flags = info->port.flags, - .baud_base = 921600, - .close_delay = info->port.close_delay - }; - return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; -} - - -static int moxa_set_serial_info(struct moxa_port *info, - struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - if (new_serial.irq != 0 || new_serial.port != 0 || - new_serial.custom_divisor != 0 || - new_serial.baud_base != 921600) - return -EPERM; - - if (!capable(CAP_SYS_ADMIN)) { - if (((new_serial.flags & ~ASYNC_USR_MASK) != - (info->port.flags & ~ASYNC_USR_MASK))) - return -EPERM; - } else - info->port.close_delay = new_serial.close_delay * HZ / 100; - - new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS); - new_serial.flags |= (info->port.flags & ASYNC_FLAGS); - - MoxaSetFifo(info, new_serial.type == PORT_16550A); - - info->type = new_serial.type; - return 0; -} - - - -/***************************************************************************** - * Static local functions: * - *****************************************************************************/ - -static void MoxaSetFifo(struct moxa_port *port, int enable) -{ - void __iomem *ofsAddr = port->tableAddr; - - if (!enable) { - moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0); - moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1); - } else { - moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3); - moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16); - } -} diff --git a/drivers/char/moxa.h b/drivers/char/moxa.h deleted file mode 100644 index 87d16ce57be7..000000000000 --- a/drivers/char/moxa.h +++ /dev/null @@ -1,304 +0,0 @@ -#ifndef MOXA_H_FILE -#define MOXA_H_FILE - -#define MOXA 0x400 -#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */ -#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */ -#define MOXA_GETDATACOUNT (MOXA + 23) -#define MOXA_GET_IOQUEUE (MOXA + 27) -#define MOXA_FLUSH_QUEUE (MOXA + 28) -#define MOXA_GETMSTATUS (MOXA + 65) - -/* - * System Configuration - */ - -#define Magic_code 0x404 - -/* - * for C218 BIOS initialization - */ -#define C218_ConfBase 0x800 -#define C218_status (C218_ConfBase + 0) /* BIOS running status */ -#define C218_diag (C218_ConfBase + 2) /* diagnostic status */ -#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */ -#define C218DLoad_len (C218_ConfBase + 6) /* WORD */ -#define C218check_sum (C218_ConfBase + 8) /* BYTE */ -#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */ -#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */ -#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */ -#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */ -#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */ - -#define C218_LoadBuf 0x0F00 -#define C218_KeyCode 0x218 -#define CP204J_KeyCode 0x204 - -/* - * for C320 BIOS initialization - */ -#define C320_ConfBase 0x800 -#define C320_LoadBuf 0x0f00 -#define STS_init 0x05 /* for C320_status */ - -#define C320_status C320_ConfBase + 0 /* BIOS running status */ -#define C320_diag C320_ConfBase + 2 /* diagnostic status */ -#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */ -#define C320DLoad_len C320_ConfBase + 6 /* WORD */ -#define C320check_sum C320_ConfBase + 8 /* WORD */ -#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */ -#define C320bapi_len C320_ConfBase + 0x0c /* WORD */ -#define C320UART_no C320_ConfBase + 0x0e /* WORD */ - -#define C320_KeyCode 0x320 - -#define FixPage_addr 0x0000 /* starting addr of static page */ -#define DynPage_addr 0x2000 /* starting addr of dynamic page */ -#define C218_start 0x3000 /* starting addr of C218 BIOS prg */ -#define Control_reg 0x1ff0 /* select page and reset control */ -#define HW_reset 0x80 - -/* - * Function Codes - */ -#define FC_CardReset 0x80 -#define FC_ChannelReset 1 /* C320 firmware not supported */ -#define FC_EnableCH 2 -#define FC_DisableCH 3 -#define FC_SetParam 4 -#define FC_SetMode 5 -#define FC_SetRate 6 -#define FC_LineControl 7 -#define FC_LineStatus 8 -#define FC_XmitControl 9 -#define FC_FlushQueue 10 -#define FC_SendBreak 11 -#define FC_StopBreak 12 -#define FC_LoopbackON 13 -#define FC_LoopbackOFF 14 -#define FC_ClrIrqTable 15 -#define FC_SendXon 16 -#define FC_SetTermIrq 17 /* C320 firmware not supported */ -#define FC_SetCntIrq 18 /* C320 firmware not supported */ -#define FC_SetBreakIrq 19 -#define FC_SetLineIrq 20 -#define FC_SetFlowCtl 21 -#define FC_GenIrq 22 -#define FC_InCD180 23 -#define FC_OutCD180 24 -#define FC_InUARTreg 23 -#define FC_OutUARTreg 24 -#define FC_SetXonXoff 25 -#define FC_OutCD180CCR 26 -#define FC_ExtIQueue 27 -#define FC_ExtOQueue 28 -#define FC_ClrLineIrq 29 -#define FC_HWFlowCtl 30 -#define FC_GetClockRate 35 -#define FC_SetBaud 36 -#define FC_SetDataMode 41 -#define FC_GetCCSR 43 -#define FC_GetDataError 45 -#define FC_RxControl 50 -#define FC_ImmSend 51 -#define FC_SetXonState 52 -#define FC_SetXoffState 53 -#define FC_SetRxFIFOTrig 54 -#define FC_SetTxFIFOCnt 55 -#define FC_UnixRate 56 -#define FC_UnixResetTimer 57 - -#define RxFIFOTrig1 0 -#define RxFIFOTrig4 1 -#define RxFIFOTrig8 2 -#define RxFIFOTrig14 3 - -/* - * Dual-Ported RAM - */ -#define DRAM_global 0 -#define INT_data (DRAM_global + 0) -#define Config_base (DRAM_global + 0x108) - -#define IRQindex (INT_data + 0) -#define IRQpending (INT_data + 4) -#define IRQtable (INT_data + 8) - -/* - * Interrupt Status - */ -#define IntrRx 0x01 /* receiver data O.K. */ -#define IntrTx 0x02 /* transmit buffer empty */ -#define IntrFunc 0x04 /* function complete */ -#define IntrBreak 0x08 /* received break */ -#define IntrLine 0x10 /* line status change - for transmitter */ -#define IntrIntr 0x20 /* received INTR code */ -#define IntrQuit 0x40 /* received QUIT code */ -#define IntrEOF 0x80 /* received EOF code */ - -#define IntrRxTrigger 0x100 /* rx data count reach tigger value */ -#define IntrTxTrigger 0x200 /* tx data count below trigger value */ - -#define Magic_no (Config_base + 0) -#define Card_model_no (Config_base + 2) -#define Total_ports (Config_base + 4) -#define Module_cnt (Config_base + 8) -#define Module_no (Config_base + 10) -#define Timer_10ms (Config_base + 14) -#define Disable_IRQ (Config_base + 20) -#define TMS320_PORT1 (Config_base + 22) -#define TMS320_PORT2 (Config_base + 24) -#define TMS320_CLOCK (Config_base + 26) - -/* - * DATA BUFFER in DRAM - */ -#define Extern_table 0x400 /* Base address of the external table - (24 words * 64) total 3K bytes - (24 words * 128) total 6K bytes */ -#define Extern_size 0x60 /* 96 bytes */ -#define RXrptr 0x00 /* read pointer for RX buffer */ -#define RXwptr 0x02 /* write pointer for RX buffer */ -#define TXrptr 0x04 /* read pointer for TX buffer */ -#define TXwptr 0x06 /* write pointer for TX buffer */ -#define HostStat 0x08 /* IRQ flag and general flag */ -#define FlagStat 0x0A -#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */ - /* x x x x | | | | */ - /* | | | + CTS flow */ - /* | | +--- RTS flow */ - /* | +------ TX Xon/Xoff */ - /* +--------- RX Xon/Xoff */ -#define Break_cnt 0x0E /* received break count */ -#define CD180TXirq 0x10 /* if non-0: enable TX irq */ -#define RX_mask 0x12 -#define TX_mask 0x14 -#define Ofs_rxb 0x16 -#define Ofs_txb 0x18 -#define Page_rxb 0x1A -#define Page_txb 0x1C -#define EndPage_rxb 0x1E -#define EndPage_txb 0x20 -#define Data_error 0x22 -#define RxTrigger 0x28 -#define TxTrigger 0x2a - -#define rRXwptr 0x34 -#define Low_water 0x36 - -#define FuncCode 0x40 -#define FuncArg 0x42 -#define FuncArg1 0x44 - -#define C218rx_size 0x2000 /* 8K bytes */ -#define C218tx_size 0x8000 /* 32K bytes */ - -#define C218rx_mask (C218rx_size - 1) -#define C218tx_mask (C218tx_size - 1) - -#define C320p8rx_size 0x2000 -#define C320p8tx_size 0x8000 -#define C320p8rx_mask (C320p8rx_size - 1) -#define C320p8tx_mask (C320p8tx_size - 1) - -#define C320p16rx_size 0x2000 -#define C320p16tx_size 0x4000 -#define C320p16rx_mask (C320p16rx_size - 1) -#define C320p16tx_mask (C320p16tx_size - 1) - -#define C320p24rx_size 0x2000 -#define C320p24tx_size 0x2000 -#define C320p24rx_mask (C320p24rx_size - 1) -#define C320p24tx_mask (C320p24tx_size - 1) - -#define C320p32rx_size 0x1000 -#define C320p32tx_size 0x1000 -#define C320p32rx_mask (C320p32rx_size - 1) -#define C320p32tx_mask (C320p32tx_size - 1) - -#define Page_size 0x2000U -#define Page_mask (Page_size - 1) -#define C218rx_spage 3 -#define C218tx_spage 4 -#define C218rx_pageno 1 -#define C218tx_pageno 4 -#define C218buf_pageno 5 - -#define C320p8rx_spage 3 -#define C320p8tx_spage 4 -#define C320p8rx_pgno 1 -#define C320p8tx_pgno 4 -#define C320p8buf_pgno 5 - -#define C320p16rx_spage 3 -#define C320p16tx_spage 4 -#define C320p16rx_pgno 1 -#define C320p16tx_pgno 2 -#define C320p16buf_pgno 3 - -#define C320p24rx_spage 3 -#define C320p24tx_spage 4 -#define C320p24rx_pgno 1 -#define C320p24tx_pgno 1 -#define C320p24buf_pgno 2 - -#define C320p32rx_spage 3 -#define C320p32tx_ofs C320p32rx_size -#define C320p32tx_spage 3 -#define C320p32buf_pgno 1 - -/* - * Host Status - */ -#define WakeupRx 0x01 -#define WakeupTx 0x02 -#define WakeupBreak 0x08 -#define WakeupLine 0x10 -#define WakeupIntr 0x20 -#define WakeupQuit 0x40 -#define WakeupEOF 0x80 /* used in VTIME control */ -#define WakeupRxTrigger 0x100 -#define WakeupTxTrigger 0x200 -/* - * Flag status - */ -#define Rx_over 0x01 -#define Xoff_state 0x02 -#define Tx_flowOff 0x04 -#define Tx_enable 0x08 -#define CTS_state 0x10 -#define DSR_state 0x20 -#define DCD_state 0x80 -/* - * FlowControl - */ -#define CTS_FlowCtl 1 -#define RTS_FlowCtl 2 -#define Tx_FlowCtl 4 -#define Rx_FlowCtl 8 -#define IXM_IXANY 0x10 - -#define LowWater 128 - -#define DTR_ON 1 -#define RTS_ON 2 -#define CTS_ON 1 -#define DSR_ON 2 -#define DCD_ON 8 - -/* mode definition */ -#define MX_CS8 0x03 -#define MX_CS7 0x02 -#define MX_CS6 0x01 -#define MX_CS5 0x00 - -#define MX_STOP1 0x00 -#define MX_STOP15 0x04 -#define MX_STOP2 0x08 - -#define MX_PARNONE 0x00 -#define MX_PAREVEN 0x40 -#define MX_PARODD 0xC0 - -#endif diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c deleted file mode 100644 index d188f378684d..000000000000 --- a/drivers/char/mxser.c +++ /dev/null @@ -1,2757 +0,0 @@ -/* - * mxser.c -- MOXA Smartio/Industio family multiport serial driver. - * - * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). - * Copyright (C) 2006-2008 Jiri Slaby - * - * This code is loosely based on the 1.8 moxa driver which is based on - * Linux serial driver, written by Linus Torvalds, Theodore T'so and - * others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * . The original 1.8 code is available on - * www.moxa.com. - * - Fixed x86_64 cleanness - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "mxser.h" - -#define MXSER_VERSION "2.0.5" /* 1.14 */ -#define MXSERMAJOR 174 - -#define MXSER_BOARDS 4 /* Max. boards */ -#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ -#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) -#define MXSER_ISR_PASS_LIMIT 100 - -/*CheckIsMoxaMust return value*/ -#define MOXA_OTHER_UART 0x00 -#define MOXA_MUST_MU150_HWID 0x01 -#define MOXA_MUST_MU860_HWID 0x02 - -#define WAKEUP_CHARS 256 - -#define UART_MCR_AFE 0x20 -#define UART_LSR_SPECIAL 0x1E - -#define PCI_DEVICE_ID_POS104UL 0x1044 -#define PCI_DEVICE_ID_CB108 0x1080 -#define PCI_DEVICE_ID_CP102UF 0x1023 -#define PCI_DEVICE_ID_CP112UL 0x1120 -#define PCI_DEVICE_ID_CB114 0x1142 -#define PCI_DEVICE_ID_CP114UL 0x1143 -#define PCI_DEVICE_ID_CB134I 0x1341 -#define PCI_DEVICE_ID_CP138U 0x1380 - - -#define C168_ASIC_ID 1 -#define C104_ASIC_ID 2 -#define C102_ASIC_ID 0xB -#define CI132_ASIC_ID 4 -#define CI134_ASIC_ID 3 -#define CI104J_ASIC_ID 5 - -#define MXSER_HIGHBAUD 1 -#define MXSER_HAS2 2 - -/* This is only for PCI */ -static const struct { - int type; - int tx_fifo; - int rx_fifo; - int xmit_fifo_size; - int rx_high_water; - int rx_trigger; - int rx_low_water; - long max_baud; -} Gpci_uart_info[] = { - {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, - {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, - {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} -}; -#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) - -struct mxser_cardinfo { - char *name; - unsigned int nports; - unsigned int flags; -}; - -static const struct mxser_cardinfo mxser_cards[] = { -/* 0*/ { "C168 series", 8, }, - { "C104 series", 4, }, - { "CI-104J series", 4, }, - { "C168H/PCI series", 8, }, - { "C104H/PCI series", 4, }, -/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */ - { "CI-132 series", 4, MXSER_HAS2 }, - { "CI-134 series", 4, }, - { "CP-132 series", 2, }, - { "CP-114 series", 4, }, -/*10*/ { "CT-114 series", 4, }, - { "CP-102 series", 2, MXSER_HIGHBAUD }, - { "CP-104U series", 4, }, - { "CP-168U series", 8, }, - { "CP-132U series", 2, }, -/*15*/ { "CP-134U series", 4, }, - { "CP-104JU series", 4, }, - { "Moxa UC7000 Serial", 8, }, /* RC7000 */ - { "CP-118U series", 8, }, - { "CP-102UL series", 2, }, -/*20*/ { "CP-102U series", 2, }, - { "CP-118EL series", 8, }, - { "CP-168EL series", 8, }, - { "CP-104EL series", 4, }, - { "CB-108 series", 8, }, -/*25*/ { "CB-114 series", 4, }, - { "CB-134I series", 4, }, - { "CP-138U series", 8, }, - { "POS-104UL series", 4, }, - { "CP-114UL series", 4, }, -/*30*/ { "CP-102UF series", 2, }, - { "CP-112UL series", 2, }, -}; - -/* driver_data correspond to the lines in the structure above - see also ISA probe function before you change something */ -static struct pci_device_id mxser_pcibrds[] = { - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 }, - { } -}; -MODULE_DEVICE_TABLE(pci, mxser_pcibrds); - -static unsigned long ioaddr[MXSER_BOARDS]; -static int ttymajor = MXSERMAJOR; - -/* Variables for insmod */ - -MODULE_AUTHOR("Casper Yang"); -MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -module_param_array(ioaddr, ulong, NULL, 0); -MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); -module_param(ttymajor, int, 0); -MODULE_LICENSE("GPL"); - -struct mxser_log { - int tick; - unsigned long rxcnt[MXSER_PORTS]; - unsigned long txcnt[MXSER_PORTS]; -}; - -struct mxser_mon { - unsigned long rxcnt; - unsigned long txcnt; - unsigned long up_rxcnt; - unsigned long up_txcnt; - int modem_status; - unsigned char hold_reason; -}; - -struct mxser_mon_ext { - unsigned long rx_cnt[32]; - unsigned long tx_cnt[32]; - unsigned long up_rxcnt[32]; - unsigned long up_txcnt[32]; - int modem_status[32]; - - long baudrate[32]; - int databits[32]; - int stopbits[32]; - int parity[32]; - int flowctrl[32]; - int fifo[32]; - int iftype[32]; -}; - -struct mxser_board; - -struct mxser_port { - struct tty_port port; - struct mxser_board *board; - - unsigned long ioaddr; - unsigned long opmode_ioaddr; - int max_baud; - - int rx_high_water; - int rx_trigger; /* Rx fifo trigger level */ - int rx_low_water; - int baud_base; /* max. speed */ - int type; /* UART type */ - - int x_char; /* xon/xoff character */ - int IER; /* Interrupt Enable Register */ - int MCR; /* Modem control register */ - - unsigned char stop_rx; - unsigned char ldisc_stop_rx; - - int custom_divisor; - unsigned char err_shadow; - - struct async_icount icount; /* kernel counters for 4 input interrupts */ - int timeout; - - int read_status_mask; - int ignore_status_mask; - int xmit_fifo_size; - int xmit_head; - int xmit_tail; - int xmit_cnt; - - struct ktermios normal_termios; - - struct mxser_mon mon_data; - - spinlock_t slock; -}; - -struct mxser_board { - unsigned int idx; - int irq; - const struct mxser_cardinfo *info; - unsigned long vector; - unsigned long vector_mask; - - int chip_flag; - int uart_type; - - struct mxser_port ports[MXSER_PORTS_PER_BOARD]; -}; - -struct mxser_mstatus { - tcflag_t cflag; - int cts; - int dsr; - int ri; - int dcd; -}; - -static struct mxser_board mxser_boards[MXSER_BOARDS]; -static struct tty_driver *mxvar_sdriver; -static struct mxser_log mxvar_log; -static int mxser_set_baud_method[MXSER_PORTS + 1]; - -static void mxser_enable_must_enchance_mode(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr |= MOXA_MUST_EFR_EFRB_ENABLE; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -#ifdef CONFIG_PCI -static void mxser_disable_must_enchance_mode(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} -#endif - -static void mxser_set_must_xon1_value(unsigned long baseio, u8 value) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK0; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(value, baseio + MOXA_MUST_XON1_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK0; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_set_must_fifo_value(struct mxser_port *info) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(info->ioaddr + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR); - - efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK1; - - outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER); - outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); - outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); - outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); - outb(oldlcr, info->ioaddr + UART_LCR); -} - -static void mxser_set_must_enum_value(unsigned long baseio, u8 value) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK2; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(value, baseio + MOXA_MUST_ENUM_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -#ifdef CONFIG_PCI -static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK2; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - *pId = inb(baseio + MOXA_MUST_HWID_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} -#endif - -static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_enable_must_tx_software_flow_control(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_TX_MASK; - efr |= MOXA_MUST_EFR_SF_TX1; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_disable_must_tx_software_flow_control(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_TX_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_enable_must_rx_software_flow_control(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_RX_MASK; - efr |= MOXA_MUST_EFR_SF_RX1; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_disable_must_rx_software_flow_control(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_RX_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -#ifdef CONFIG_PCI -static int __devinit CheckIsMoxaMust(unsigned long io) -{ - u8 oldmcr, hwid; - int i; - - outb(0, io + UART_LCR); - mxser_disable_must_enchance_mode(io); - oldmcr = inb(io + UART_MCR); - outb(0, io + UART_MCR); - mxser_set_must_xon1_value(io, 0x11); - if ((hwid = inb(io + UART_MCR)) != 0) { - outb(oldmcr, io + UART_MCR); - return MOXA_OTHER_UART; - } - - mxser_get_must_hardware_id(io, &hwid); - for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ - if (hwid == Gpci_uart_info[i].type) - return (int)hwid; - } - return MOXA_OTHER_UART; -} -#endif - -static void process_txrx_fifo(struct mxser_port *info) -{ - int i; - - if ((info->type == PORT_16450) || (info->type == PORT_8250)) { - info->rx_trigger = 1; - info->rx_high_water = 1; - info->rx_low_water = 1; - info->xmit_fifo_size = 1; - } else - for (i = 0; i < UART_INFO_NUM; i++) - if (info->board->chip_flag == Gpci_uart_info[i].type) { - info->rx_trigger = Gpci_uart_info[i].rx_trigger; - info->rx_low_water = Gpci_uart_info[i].rx_low_water; - info->rx_high_water = Gpci_uart_info[i].rx_high_water; - info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; - break; - } -} - -static unsigned char mxser_get_msr(int baseaddr, int mode, int port) -{ - static unsigned char mxser_msr[MXSER_PORTS + 1]; - unsigned char status = 0; - - status = inb(baseaddr + UART_MSR); - - mxser_msr[port] &= 0x0F; - mxser_msr[port] |= status; - status = mxser_msr[port]; - if (mode) - mxser_msr[port] = 0; - - return status; -} - -static int mxser_carrier_raised(struct tty_port *port) -{ - struct mxser_port *mp = container_of(port, struct mxser_port, port); - return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; -} - -static void mxser_dtr_rts(struct tty_port *port, int on) -{ - struct mxser_port *mp = container_of(port, struct mxser_port, port); - unsigned long flags; - - spin_lock_irqsave(&mp->slock, flags); - if (on) - outb(inb(mp->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); - else - outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), - mp->ioaddr + UART_MCR); - spin_unlock_irqrestore(&mp->slock, flags); -} - -static int mxser_set_baud(struct tty_struct *tty, long newspd) -{ - struct mxser_port *info = tty->driver_data; - int quot = 0, baud; - unsigned char cval; - - if (!info->ioaddr) - return -1; - - if (newspd > info->max_baud) - return -1; - - if (newspd == 134) { - quot = 2 * info->baud_base / 269; - tty_encode_baud_rate(tty, 134, 134); - } else if (newspd) { - quot = info->baud_base / newspd; - if (quot == 0) - quot = 1; - baud = info->baud_base/quot; - tty_encode_baud_rate(tty, baud, baud); - } else { - quot = 0; - } - - info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); - info->timeout += HZ / 50; /* Add .02 seconds of slop */ - - if (quot) { - info->MCR |= UART_MCR_DTR; - outb(info->MCR, info->ioaddr + UART_MCR); - } else { - info->MCR &= ~UART_MCR_DTR; - outb(info->MCR, info->ioaddr + UART_MCR); - return 0; - } - - cval = inb(info->ioaddr + UART_LCR); - - outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ - - outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ - outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ - outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ - -#ifdef BOTHER - if (C_BAUD(tty) == BOTHER) { - quot = info->baud_base % newspd; - quot *= 8; - if (quot % newspd > newspd / 2) { - quot /= newspd; - quot++; - } else - quot /= newspd; - - mxser_set_must_enum_value(info->ioaddr, quot); - } else -#endif - mxser_set_must_enum_value(info->ioaddr, 0); - - return 0; -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static int mxser_change_speed(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct mxser_port *info = tty->driver_data; - unsigned cflag, cval, fcr; - int ret = 0; - unsigned char status; - - cflag = tty->termios->c_cflag; - if (!info->ioaddr) - return ret; - - if (mxser_set_baud_method[tty->index] == 0) - mxser_set_baud(tty, tty_get_baud_rate(tty)); - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; - break; - case CS6: - cval = 0x01; - break; - case CS7: - cval = 0x02; - break; - case CS8: - cval = 0x03; - break; - default: - cval = 0x00; - break; /* too keep GCC shut... */ - } - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; - - if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->board->chip_flag) { - fcr = UART_FCR_ENABLE_FIFO; - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - mxser_set_must_fifo_value(info); - } else - fcr = 0; - } else { - fcr = UART_FCR_ENABLE_FIFO; - if (info->board->chip_flag) { - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - mxser_set_must_fifo_value(info); - } else { - switch (info->rx_trigger) { - case 1: - fcr |= UART_FCR_TRIGGER_1; - break; - case 4: - fcr |= UART_FCR_TRIGGER_4; - break; - case 8: - fcr |= UART_FCR_TRIGGER_8; - break; - default: - fcr |= UART_FCR_TRIGGER_14; - break; - } - } - } - - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - info->MCR &= ~UART_MCR_AFE; - if (cflag & CRTSCTS) { - info->port.flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - if ((info->type == PORT_16550A) || (info->board->chip_flag)) { - info->MCR |= UART_MCR_AFE; - } else { - status = inb(info->ioaddr + UART_MSR); - if (tty->hw_stopped) { - if (status & UART_MSR_CTS) { - tty->hw_stopped = 0; - if (info->type != PORT_16550A && - !info->board->chip_flag) { - outb(info->IER & ~UART_IER_THRI, - info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - tty_wakeup(tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && - (!info->board->chip_flag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - } - } - } - } else { - info->port.flags &= ~ASYNC_CTS_FLOW; - } - outb(info->MCR, info->ioaddr + UART_MCR); - if (cflag & CLOCAL) { - info->port.flags &= ~ASYNC_CHECK_CD; - } else { - info->port.flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - outb(info->IER, info->ioaddr + UART_IER); - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; - - if (I_IGNBRK(tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(tty)) { - info->ignore_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - info->read_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - } - } - if (info->board->chip_flag) { - mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); - mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); - if (I_IXON(tty)) { - mxser_enable_must_rx_software_flow_control( - info->ioaddr); - } else { - mxser_disable_must_rx_software_flow_control( - info->ioaddr); - } - if (I_IXOFF(tty)) { - mxser_enable_must_tx_software_flow_control( - info->ioaddr); - } else { - mxser_disable_must_tx_software_flow_control( - info->ioaddr); - } - } - - - outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ - outb(cval, info->ioaddr + UART_LCR); - - return ret; -} - -static void mxser_check_modem_status(struct tty_struct *tty, - struct mxser_port *port, int status) -{ - /* update input line counters */ - if (status & UART_MSR_TERI) - port->icount.rng++; - if (status & UART_MSR_DDSR) - port->icount.dsr++; - if (status & UART_MSR_DDCD) - port->icount.dcd++; - if (status & UART_MSR_DCTS) - port->icount.cts++; - port->mon_data.modem_status = status; - wake_up_interruptible(&port->port.delta_msr_wait); - - if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { - if (status & UART_MSR_DCD) - wake_up_interruptible(&port->port.open_wait); - } - - if (port->port.flags & ASYNC_CTS_FLOW) { - if (tty->hw_stopped) { - if (status & UART_MSR_CTS) { - tty->hw_stopped = 0; - - if ((port->type != PORT_16550A) && - (!port->board->chip_flag)) { - outb(port->IER & ~UART_IER_THRI, - port->ioaddr + UART_IER); - port->IER |= UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - tty_wakeup(tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - tty->hw_stopped = 1; - if (port->type != PORT_16550A && - !port->board->chip_flag) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - } - } - } -} - -static int mxser_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct mxser_port *info = container_of(port, struct mxser_port, port); - unsigned long page; - unsigned long flags; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - spin_lock_irqsave(&info->slock, flags); - - if (!info->ioaddr || !info->type) { - set_bit(TTY_IO_ERROR, &tty->flags); - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - info->port.xmit_buf = (unsigned char *) page; - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in mxser_change_speed()) - */ - if (info->board->chip_flag) - outb((UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); - else - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); - - /* - * At this point there's no way the LSR could still be 0xFF; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (inb(info->ioaddr + UART_LSR) == 0xff) { - spin_unlock_irqrestore(&info->slock, flags); - if (capable(CAP_SYS_ADMIN)) { - set_bit(TTY_IO_ERROR, &tty->flags); - return 0; - } else - return -ENODEV; - } - - /* - * Clear the interrupt registers. - */ - (void) inb(info->ioaddr + UART_LSR); - (void) inb(info->ioaddr + UART_RX); - (void) inb(info->ioaddr + UART_IIR); - (void) inb(info->ioaddr + UART_MSR); - - /* - * Now, initialize the UART - */ - outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ - info->MCR = UART_MCR_DTR | UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - - /* - * Finally, enable interrupts - */ - info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - - if (info->board->chip_flag) - info->IER |= MOXA_MUST_IER_EGDAI; - outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ - - /* - * And clear the interrupt registers again for luck. - */ - (void) inb(info->ioaddr + UART_LSR); - (void) inb(info->ioaddr + UART_RX); - (void) inb(info->ioaddr + UART_IIR); - (void) inb(info->ioaddr + UART_MSR); - - clear_bit(TTY_IO_ERROR, &tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - mxser_change_speed(tty, NULL); - spin_unlock_irqrestore(&info->slock, flags); - - return 0; -} - -/* - * This routine will shutdown a serial port - */ -static void mxser_shutdown_port(struct tty_port *port) -{ - struct mxser_port *info = container_of(port, struct mxser_port, port); - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->port.delta_msr_wait); - - /* - * Free the xmit buffer, if necessary - */ - if (info->port.xmit_buf) { - free_page((unsigned long) info->port.xmit_buf); - info->port.xmit_buf = NULL; - } - - info->IER = 0; - outb(0x00, info->ioaddr + UART_IER); - - /* clear Rx/Tx FIFO's */ - if (info->board->chip_flag) - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE, - info->ioaddr + UART_FCR); - else - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - info->ioaddr + UART_FCR); - - /* read data port to reset things */ - (void) inb(info->ioaddr + UART_RX); - - - if (info->board->chip_flag) - SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); - - spin_unlock_irqrestore(&info->slock, flags); -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int mxser_open(struct tty_struct *tty, struct file *filp) -{ - struct mxser_port *info; - int line; - - line = tty->index; - if (line == MXSER_PORTS) - return 0; - if (line < 0 || line > MXSER_PORTS) - return -ENODEV; - info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; - if (!info->ioaddr) - return -ENODEV; - - tty->driver_data = info; - return tty_port_open(&info->port, tty, filp); -} - -static void mxser_flush_buffer(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - char fcr; - unsigned long flags; - - - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - fcr = inb(info->ioaddr + UART_FCR); - outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); - outb(fcr, info->ioaddr + UART_FCR); - - spin_unlock_irqrestore(&info->slock, flags); - - tty_wakeup(tty); -} - - -static void mxser_close_port(struct tty_port *port) -{ - struct mxser_port *info = container_of(port, struct mxser_port, port); - unsigned long timeout; - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->IER &= ~UART_IER_RLSI; - if (info->board->chip_flag) - info->IER &= ~MOXA_MUST_RECV_ISR; - - outb(info->IER, info->ioaddr + UART_IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { - schedule_timeout_interruptible(5); - if (time_after(jiffies, timeout)) - break; - } -} - -/* - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - */ -static void mxser_close(struct tty_struct *tty, struct file *filp) -{ - struct mxser_port *info = tty->driver_data; - struct tty_port *port = &info->port; - - if (tty->index == MXSER_PORTS || info == NULL) - return; - if (tty_port_close_start(port, tty, filp) == 0) - return; - mutex_lock(&port->mutex); - mxser_close_port(port); - mxser_flush_buffer(tty); - mxser_shutdown_port(port); - clear_bit(ASYNCB_INITIALIZED, &port->flags); - mutex_unlock(&port->mutex); - /* Right now the tty_port set is done outside of the close_end helper - as we don't yet have everyone using refcounts */ - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); -} - -static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - int c, total = 0; - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (!info->port.xmit_buf) - return 0; - - while (1) { - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) - break; - - memcpy(info->port.xmit_buf + info->xmit_head, buf, c); - spin_lock_irqsave(&info->slock, flags); - info->xmit_head = (info->xmit_head + c) & - (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->slock, flags); - - buf += c; - count -= c; - total += c; - } - - if (info->xmit_cnt && !tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - (info->board->chip_flag)) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } - return total; -} - -static int mxser_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (!info->port.xmit_buf) - return 0; - - if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) - return 0; - - spin_lock_irqsave(&info->slock, flags); - info->port.xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; - spin_unlock_irqrestore(&info->slock, flags); - if (!tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - info->board->chip_flag) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } - return 1; -} - - -static void mxser_flush_chars(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf || - (tty->hw_stopped && info->type != PORT_16550A && - !info->board->chip_flag)) - return; - - spin_lock_irqsave(&info->slock, flags); - - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - - spin_unlock_irqrestore(&info->slock, flags); -} - -static int mxser_write_room(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - int ret; - - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - return ret < 0 ? 0 : ret; -} - -static int mxser_chars_in_buffer(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - return info->xmit_cnt; -} - -/* - * ------------------------------------------------------------ - * friends of mxser_ioctl() - * ------------------------------------------------------------ - */ -static int mxser_get_serial_info(struct tty_struct *tty, - struct serial_struct __user *retinfo) -{ - struct mxser_port *info = tty->driver_data; - struct serial_struct tmp = { - .type = info->type, - .line = tty->index, - .port = info->ioaddr, - .irq = info->board->irq, - .flags = info->port.flags, - .baud_base = info->baud_base, - .close_delay = info->port.close_delay, - .closing_wait = info->port.closing_wait, - .custom_divisor = info->custom_divisor, - .hub6 = 0 - }; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int mxser_set_serial_info(struct tty_struct *tty, - struct serial_struct __user *new_info) -{ - struct mxser_port *info = tty->driver_data; - struct tty_port *port = &info->port; - struct serial_struct new_serial; - speed_t baud; - unsigned long sl_flags; - unsigned int flags; - int retval = 0; - - if (!new_info || !info->ioaddr) - return -ENODEV; - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - if (new_serial.irq != info->board->irq || - new_serial.port != info->ioaddr) - return -EINVAL; - - flags = port->flags & ASYNC_SPD_MASK; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || - (new_serial.close_delay != info->port.close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - } else { - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - port->flags = ((port->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - port->close_delay = new_serial.close_delay * HZ / 100; - port->closing_wait = new_serial.closing_wait * HZ / 100; - tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && - (new_serial.baud_base != info->baud_base || - new_serial.custom_divisor != - info->custom_divisor)) { - if (new_serial.custom_divisor == 0) - return -EINVAL; - baud = new_serial.baud_base / new_serial.custom_divisor; - tty_encode_baud_rate(tty, baud, baud); - } - } - - info->type = new_serial.type; - - process_txrx_fifo(info); - - if (test_bit(ASYNCB_INITIALIZED, &port->flags)) { - if (flags != (port->flags & ASYNC_SPD_MASK)) { - spin_lock_irqsave(&info->slock, sl_flags); - mxser_change_speed(tty, NULL); - spin_unlock_irqrestore(&info->slock, sl_flags); - } - } else { - retval = mxser_activate(port, tty); - if (retval == 0) - set_bit(ASYNCB_INITIALIZED, &port->flags); - } - return retval; -} - -/* - * mxser_get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int mxser_get_lsr_info(struct mxser_port *info, - unsigned int __user *value) -{ - unsigned char status; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->ioaddr + UART_LSR); - spin_unlock_irqrestore(&info->slock, flags); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} - -static int mxser_tiocmget(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned char control, status; - unsigned long flags; - - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - control = info->MCR; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->ioaddr + UART_MSR); - if (status & UART_MSR_ANY_DELTA) - mxser_check_modem_status(tty, info, status); - spin_unlock_irqrestore(&info->slock, flags); - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | - ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | - ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | - ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | - ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | - ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} - -static int mxser_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - spin_lock_irqsave(&info->slock, flags); - - if (set & TIOCM_RTS) - info->MCR |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->MCR |= UART_MCR_DTR; - - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - - outb(info->MCR, info->ioaddr + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} - -static int __init mxser_program_mode(int port) -{ - int id, i, j, n; - - outb(0, port); - outb(0, port); - outb(0, port); - (void)inb(port); - (void)inb(port); - outb(0, port); - (void)inb(port); - - id = inb(port + 1) & 0x1F; - if ((id != C168_ASIC_ID) && - (id != C104_ASIC_ID) && - (id != C102_ASIC_ID) && - (id != CI132_ASIC_ID) && - (id != CI134_ASIC_ID) && - (id != CI104J_ASIC_ID)) - return -1; - for (i = 0, j = 0; i < 4; i++) { - n = inb(port + 2); - if (n == 'M') { - j = 1; - } else if ((j == 1) && (n == 1)) { - j = 2; - break; - } else - j = 0; - } - if (j != 2) - id = -2; - return id; -} - -static void __init mxser_normal_mode(int port) -{ - int i, n; - - outb(0xA5, port + 1); - outb(0x80, port + 3); - outb(12, port + 0); /* 9600 bps */ - outb(0, port + 1); - outb(0x03, port + 3); /* 8 data bits */ - outb(0x13, port + 4); /* loop back mode */ - for (i = 0; i < 16; i++) { - n = inb(port + 5); - if ((n & 0x61) == 0x60) - break; - if ((n & 1) == 1) - (void)inb(port); - } - outb(0x00, port + 4); -} - -#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ -#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ -#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ -#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ -#define EN_CCMD 0x000 /* Chip's command register */ -#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ -#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ -#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ -#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ -#define EN0_DCFG 0x00E /* Data configuration reg WR */ -#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ -#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ -#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ -static int __init mxser_read_register(int port, unsigned short *regs) -{ - int i, k, value, id; - unsigned int j; - - id = mxser_program_mode(port); - if (id < 0) - return id; - for (i = 0; i < 14; i++) { - k = (i & 0x3F) | 0x180; - for (j = 0x100; j > 0; j >>= 1) { - outb(CHIP_CS, port); - if (k & j) { - outb(CHIP_CS | CHIP_DO, port); - outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ - } else { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ - } - } - (void)inb(port); - value = 0; - for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); - if (inb(port) & CHIP_DI) - value |= j; - } - regs[i] = value; - outb(0, port); - } - mxser_normal_mode(port); - return id; -} - -static int mxser_ioctl_special(unsigned int cmd, void __user *argp) -{ - struct mxser_port *ip; - struct tty_port *port; - struct tty_struct *tty; - int result, status; - unsigned int i, j; - int ret = 0; - - switch (cmd) { - case MOXA_GET_MAJOR: - if (printk_ratelimit()) - printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl " - "%x (GET_MAJOR), fix your userspace\n", - current->comm, cmd); - return put_user(ttymajor, (int __user *)argp); - - case MOXA_CHKPORTENABLE: - result = 0; - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) - if (mxser_boards[i].ports[j].ioaddr) - result |= (1 << i); - return put_user(result, (unsigned long __user *)argp); - case MOXA_GETDATACOUNT: - /* The receive side is locked by port->slock but it isn't - clear that an exact snapshot is worth copying here */ - if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) - ret = -EFAULT; - return ret; - case MOXA_GETMSTATUS: { - struct mxser_mstatus ms, __user *msu = argp; - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { - ip = &mxser_boards[i].ports[j]; - port = &ip->port; - memset(&ms, 0, sizeof(ms)); - - mutex_lock(&port->mutex); - if (!ip->ioaddr) - goto copy; - - tty = tty_port_tty_get(port); - - if (!tty || !tty->termios) - ms.cflag = ip->normal_termios.c_cflag; - else - ms.cflag = tty->termios->c_cflag; - tty_kref_put(tty); - spin_lock_irq(&ip->slock); - status = inb(ip->ioaddr + UART_MSR); - spin_unlock_irq(&ip->slock); - if (status & UART_MSR_DCD) - ms.dcd = 1; - if (status & UART_MSR_DSR) - ms.dsr = 1; - if (status & UART_MSR_CTS) - ms.cts = 1; - copy: - mutex_unlock(&port->mutex); - if (copy_to_user(msu, &ms, sizeof(ms))) - return -EFAULT; - msu++; - } - return 0; - } - case MOXA_ASPP_MON_EXT: { - struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */ - unsigned int cflag, iflag, p; - u8 opmode; - - me = kzalloc(sizeof(*me), GFP_KERNEL); - if (!me) - return -ENOMEM; - - for (i = 0, p = 0; i < MXSER_BOARDS; i++) { - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { - if (p >= ARRAY_SIZE(me->rx_cnt)) { - i = MXSER_BOARDS; - break; - } - ip = &mxser_boards[i].ports[j]; - port = &ip->port; - - mutex_lock(&port->mutex); - if (!ip->ioaddr) { - mutex_unlock(&port->mutex); - continue; - } - - spin_lock_irq(&ip->slock); - status = mxser_get_msr(ip->ioaddr, 0, p); - - if (status & UART_MSR_TERI) - ip->icount.rng++; - if (status & UART_MSR_DDSR) - ip->icount.dsr++; - if (status & UART_MSR_DDCD) - ip->icount.dcd++; - if (status & UART_MSR_DCTS) - ip->icount.cts++; - - ip->mon_data.modem_status = status; - me->rx_cnt[p] = ip->mon_data.rxcnt; - me->tx_cnt[p] = ip->mon_data.txcnt; - me->up_rxcnt[p] = ip->mon_data.up_rxcnt; - me->up_txcnt[p] = ip->mon_data.up_txcnt; - me->modem_status[p] = - ip->mon_data.modem_status; - spin_unlock_irq(&ip->slock); - - tty = tty_port_tty_get(&ip->port); - - if (!tty || !tty->termios) { - cflag = ip->normal_termios.c_cflag; - iflag = ip->normal_termios.c_iflag; - me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); - } else { - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; - me->baudrate[p] = tty_get_baud_rate(tty); - } - tty_kref_put(tty); - - me->databits[p] = cflag & CSIZE; - me->stopbits[p] = cflag & CSTOPB; - me->parity[p] = cflag & (PARENB | PARODD | - CMSPAR); - - if (cflag & CRTSCTS) - me->flowctrl[p] |= 0x03; - - if (iflag & (IXON | IXOFF)) - me->flowctrl[p] |= 0x0C; - - if (ip->type == PORT_16550A) - me->fifo[p] = 1; - - opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); - opmode &= OP_MODE_MASK; - me->iftype[p] = opmode; - mutex_unlock(&port->mutex); - } - } - if (copy_to_user(argp, me, sizeof(*me))) - ret = -EFAULT; - kfree(me); - return ret; - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, - struct async_icount *cprev) -{ - struct async_icount cnow; - unsigned long flags; - int ret; - - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->slock, flags); - - ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); - - *cprev = cnow; - - return ret; -} - -static int mxser_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct mxser_port *info = tty->driver_data; - struct tty_port *port = &info->port; - struct async_icount cnow; - unsigned long flags; - void __user *argp = (void __user *)arg; - int retval; - - if (tty->index == MXSER_PORTS) - return mxser_ioctl_special(cmd, argp); - - if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - int p; - unsigned long opmode; - static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; - int shiftbit; - unsigned char val, mask; - - p = tty->index % 4; - if (cmd == MOXA_SET_OP_MODE) { - if (get_user(opmode, (int __user *) argp)) - return -EFAULT; - if (opmode != RS232_MODE && - opmode != RS485_2WIRE_MODE && - opmode != RS422_MODE && - opmode != RS485_4WIRE_MODE) - return -EFAULT; - mask = ModeMask[p]; - shiftbit = p * 2; - spin_lock_irq(&info->slock); - val = inb(info->opmode_ioaddr); - val &= mask; - val |= (opmode << shiftbit); - outb(val, info->opmode_ioaddr); - spin_unlock_irq(&info->slock); - } else { - shiftbit = p * 2; - spin_lock_irq(&info->slock); - opmode = inb(info->opmode_ioaddr) >> shiftbit; - spin_unlock_irq(&info->slock); - opmode &= OP_MODE_MASK; - if (put_user(opmode, (int __user *)argp)) - return -EFAULT; - } - return 0; - } - - if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && - test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - switch (cmd) { - case TIOCGSERIAL: - mutex_lock(&port->mutex); - retval = mxser_get_serial_info(tty, argp); - mutex_unlock(&port->mutex); - return retval; - case TIOCSSERIAL: - mutex_lock(&port->mutex); - retval = mxser_set_serial_info(tty, argp); - mutex_unlock(&port->mutex); - return retval; - case TIOCSERGETLSR: /* Get line status register */ - return mxser_get_lsr_info(info, argp); - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* note the counters on entry */ - spin_unlock_irqrestore(&info->slock, flags); - - return wait_event_interruptible(info->port.delta_msr_wait, - mxser_cflags_changed(info, arg, &cnow)); - case MOXA_HighSpeedOn: - return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); - case MOXA_SDS_RSTICOUNTER: - spin_lock_irq(&info->slock); - info->mon_data.rxcnt = 0; - info->mon_data.txcnt = 0; - spin_unlock_irq(&info->slock); - return 0; - - case MOXA_ASPP_OQUEUE:{ - int len, lsr; - - len = mxser_chars_in_buffer(tty); - spin_lock_irq(&info->slock); - lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE; - spin_unlock_irq(&info->slock); - len += (lsr ? 0 : 1); - - return put_user(len, (int __user *)argp); - } - case MOXA_ASPP_MON: { - int mcr, status; - - spin_lock_irq(&info->slock); - status = mxser_get_msr(info->ioaddr, 1, tty->index); - mxser_check_modem_status(tty, info, status); - - mcr = inb(info->ioaddr + UART_MCR); - spin_unlock_irq(&info->slock); - - if (mcr & MOXA_MUST_MCR_XON_FLAG) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; - - if (mcr & MOXA_MUST_MCR_TX_XON) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; - - if (tty->hw_stopped) - info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; - else - info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - - if (copy_to_user(argp, &info->mon_data, - sizeof(struct mxser_mon))) - return -EFAULT; - - return 0; - } - case MOXA_ASPP_LSTATUS: { - if (put_user(info->err_shadow, (unsigned char __user *)argp)) - return -EFAULT; - - info->err_shadow = 0; - return 0; - } - case MOXA_SET_BAUD_METHOD: { - int method; - - if (get_user(method, (int __user *)argp)) - return -EFAULT; - mxser_set_baud_method[tty->index] = method; - return put_user(method, (int __user *)argp); - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - -static int mxser_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) - -{ - struct mxser_port *info = tty->driver_data; - struct async_icount cnow; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->slock, flags); - - icount->frame = cnow.frame; - icount->brk = cnow.brk; - icount->overrun = cnow.overrun; - icount->buf_overrun = cnow.buf_overrun; - icount->parity = cnow.parity; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - return 0; -} - -static void mxser_stoprx(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - info->ldisc_stop_rx = 1; - if (I_IXOFF(tty)) { - if (info->board->chip_flag) { - info->IER &= ~MOXA_MUST_RECV_ISR; - outb(info->IER, info->ioaddr + UART_IER); - } else { - info->x_char = STOP_CHAR(tty); - outb(0, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - } - - if (tty->termios->c_cflag & CRTSCTS) { - info->MCR &= ~UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - } -} - -/* - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - */ -static void mxser_throttle(struct tty_struct *tty) -{ - mxser_stoprx(tty); -} - -static void mxser_unthrottle(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - /* startrx */ - info->ldisc_stop_rx = 0; - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else { - if (info->board->chip_flag) { - info->IER |= MOXA_MUST_RECV_ISR; - outb(info->IER, info->ioaddr + UART_IER); - } else { - info->x_char = START_CHAR(tty); - outb(0, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - } - } - - if (tty->termios->c_cflag & CRTSCTS) { - info->MCR |= UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - } -} - -/* - * mxser_stop() and mxser_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - */ -static void mxser_stop(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_start(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt && info->port.xmit_buf) { - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - mxser_change_speed(tty, old_termios); - spin_unlock_irqrestore(&info->slock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - mxser_start(tty); - } - - /* Handle sw stopped */ - if ((old_termios->c_iflag & IXON) && - !(tty->termios->c_iflag & IXON)) { - tty->stopped = 0; - - if (info->board->chip_flag) { - spin_lock_irqsave(&info->slock, flags); - mxser_disable_must_rx_software_flow_control( - info->ioaddr); - spin_unlock_irqrestore(&info->slock, flags); - } - - mxser_start(tty); - } -} - -/* - * mxser_wait_until_sent() --- wait until the transmitter is empty - */ -static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct mxser_port *info = tty->driver_data; - unsigned long orig_jiffies, char_time; - unsigned long flags; - int lsr; - - if (info->type == PORT_UNKNOWN) - return; - - if (info->xmit_fifo_size == 0) - return; /* Just in case.... */ - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; - if (timeout && timeout < char_time) - char_time = timeout; - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2 * info->timeout) - timeout = 2 * info->timeout; -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", - timeout, char_time); - printk("jiff=%lu...", jiffies); -#endif - spin_lock_irqsave(&info->slock, flags); - while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...", lsr, jiffies); -#endif - spin_unlock_irqrestore(&info->slock, flags); - schedule_timeout_interruptible(char_time); - spin_lock_irqsave(&info->slock, flags); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - spin_unlock_irqrestore(&info->slock, flags); - set_current_state(TASK_RUNNING); - -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -#endif -} - -/* - * This routine is called by tty_hangup() when a hangup is signaled. - */ -static void mxser_hangup(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - mxser_flush_buffer(tty); - tty_port_hangup(&info->port); -} - -/* - * mxser_rs_break() --- routine which turns the break handling on or off - */ -static int mxser_rs_break(struct tty_struct *tty, int break_state) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (break_state == -1) - outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, - info->ioaddr + UART_LCR); - else - outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} - -static void mxser_receive_chars(struct tty_struct *tty, - struct mxser_port *port, int *status) -{ - unsigned char ch, gdl; - int ignored = 0; - int cnt = 0; - int recv_room; - int max = 256; - - recv_room = tty->receive_room; - if (recv_room == 0 && !port->ldisc_stop_rx) - mxser_stoprx(tty); - if (port->board->chip_flag != MOXA_OTHER_UART) { - - if (*status & UART_LSR_SPECIAL) - goto intr_old; - if (port->board->chip_flag == MOXA_MUST_MU860_HWID && - (*status & MOXA_MUST_LSR_RERR)) - goto intr_old; - if (*status & MOXA_MUST_LSR_RERR) - goto intr_old; - - gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); - - if (port->board->chip_flag == MOXA_MUST_MU150_HWID) - gdl &= MOXA_MUST_GDL_MASK; - if (gdl >= recv_room) { - if (!port->ldisc_stop_rx) - mxser_stoprx(tty); - } - while (gdl--) { - ch = inb(port->ioaddr + UART_RX); - tty_insert_flip_char(tty, ch, 0); - cnt++; - } - goto end_intr; - } -intr_old: - - do { - if (max-- < 0) - break; - - ch = inb(port->ioaddr + UART_RX); - if (port->board->chip_flag && (*status & UART_LSR_OE)) - outb(0x23, port->ioaddr + UART_FCR); - *status &= port->read_status_mask; - if (*status & port->ignore_status_mask) { - if (++ignored > 100) - break; - } else { - char flag = 0; - if (*status & UART_LSR_SPECIAL) { - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - port->icount.brk++; - - if (port->port.flags & ASYNC_SAK) - do_SAK(tty); - } else if (*status & UART_LSR_PE) { - flag = TTY_PARITY; - port->icount.parity++; - } else if (*status & UART_LSR_FE) { - flag = TTY_FRAME; - port->icount.frame++; - } else if (*status & UART_LSR_OE) { - flag = TTY_OVERRUN; - port->icount.overrun++; - } else - flag = TTY_BREAK; - } - tty_insert_flip_char(tty, ch, flag); - cnt++; - if (cnt >= recv_room) { - if (!port->ldisc_stop_rx) - mxser_stoprx(tty); - break; - } - - } - - if (port->board->chip_flag) - break; - - *status = inb(port->ioaddr + UART_LSR); - } while (*status & UART_LSR_DR); - -end_intr: - mxvar_log.rxcnt[tty->index] += cnt; - port->mon_data.rxcnt += cnt; - port->mon_data.up_rxcnt += cnt; - - /* - * We are called from an interrupt context with &port->slock - * being held. Drop it temporarily in order to prevent - * recursive locking. - */ - spin_unlock(&port->slock); - tty_flip_buffer_push(tty); - spin_lock(&port->slock); -} - -static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) -{ - int count, cnt; - - if (port->x_char) { - outb(port->x_char, port->ioaddr + UART_TX); - port->x_char = 0; - mxvar_log.txcnt[tty->index]++; - port->mon_data.txcnt++; - port->mon_data.up_txcnt++; - port->icount.tx++; - return; - } - - if (port->port.xmit_buf == NULL) - return; - - if (port->xmit_cnt <= 0 || tty->stopped || - (tty->hw_stopped && - (port->type != PORT_16550A) && - (!port->board->chip_flag))) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + UART_IER); - return; - } - - cnt = port->xmit_cnt; - count = port->xmit_fifo_size; - do { - outb(port->port.xmit_buf[port->xmit_tail++], - port->ioaddr + UART_TX); - port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); - if (--port->xmit_cnt <= 0) - break; - } while (--count > 0); - mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt); - - port->mon_data.txcnt += (cnt - port->xmit_cnt); - port->mon_data.up_txcnt += (cnt - port->xmit_cnt); - port->icount.tx += (cnt - port->xmit_cnt); - - if (port->xmit_cnt < WAKEUP_CHARS) - tty_wakeup(tty); - - if (port->xmit_cnt <= 0) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + UART_IER); - } -} - -/* - * This is the serial driver's generic interrupt routine - */ -static irqreturn_t mxser_interrupt(int irq, void *dev_id) -{ - int status, iir, i; - struct mxser_board *brd = NULL; - struct mxser_port *port; - int max, irqbits, bits, msr; - unsigned int int_cnt, pass_counter = 0; - int handled = IRQ_NONE; - struct tty_struct *tty; - - for (i = 0; i < MXSER_BOARDS; i++) - if (dev_id == &mxser_boards[i]) { - brd = dev_id; - break; - } - - if (i == MXSER_BOARDS) - goto irq_stop; - if (brd == NULL) - goto irq_stop; - max = brd->info->nports; - while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { - irqbits = inb(brd->vector) & brd->vector_mask; - if (irqbits == brd->vector_mask) - break; - - handled = IRQ_HANDLED; - for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { - if (irqbits == brd->vector_mask) - break; - if (bits & irqbits) - continue; - port = &brd->ports[i]; - - int_cnt = 0; - spin_lock(&port->slock); - do { - iir = inb(port->ioaddr + UART_IIR); - if (iir & UART_IIR_NO_INT) - break; - iir &= MOXA_MUST_IIR_MASK; - tty = tty_port_tty_get(&port->port); - if (!tty || - (port->port.flags & ASYNC_CLOSING) || - !(port->port.flags & - ASYNC_INITIALIZED)) { - status = inb(port->ioaddr + UART_LSR); - outb(0x27, port->ioaddr + UART_FCR); - inb(port->ioaddr + UART_MSR); - tty_kref_put(tty); - break; - } - - status = inb(port->ioaddr + UART_LSR); - - if (status & UART_LSR_PE) - port->err_shadow |= NPPI_NOTIFY_PARITY; - if (status & UART_LSR_FE) - port->err_shadow |= NPPI_NOTIFY_FRAMING; - if (status & UART_LSR_OE) - port->err_shadow |= - NPPI_NOTIFY_HW_OVERRUN; - if (status & UART_LSR_BI) - port->err_shadow |= NPPI_NOTIFY_BREAK; - - if (port->board->chip_flag) { - if (iir == MOXA_MUST_IIR_GDA || - iir == MOXA_MUST_IIR_RDA || - iir == MOXA_MUST_IIR_RTO || - iir == MOXA_MUST_IIR_LSR) - mxser_receive_chars(tty, port, - &status); - - } else { - status &= port->read_status_mask; - if (status & UART_LSR_DR) - mxser_receive_chars(tty, port, - &status); - } - msr = inb(port->ioaddr + UART_MSR); - if (msr & UART_MSR_ANY_DELTA) - mxser_check_modem_status(tty, port, msr); - - if (port->board->chip_flag) { - if (iir == 0x02 && (status & - UART_LSR_THRE)) - mxser_transmit_chars(tty, port); - } else { - if (status & UART_LSR_THRE) - mxser_transmit_chars(tty, port); - } - tty_kref_put(tty); - } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); - spin_unlock(&port->slock); - } - } - -irq_stop: - return handled; -} - -static const struct tty_operations mxser_ops = { - .open = mxser_open, - .close = mxser_close, - .write = mxser_write, - .put_char = mxser_put_char, - .flush_chars = mxser_flush_chars, - .write_room = mxser_write_room, - .chars_in_buffer = mxser_chars_in_buffer, - .flush_buffer = mxser_flush_buffer, - .ioctl = mxser_ioctl, - .throttle = mxser_throttle, - .unthrottle = mxser_unthrottle, - .set_termios = mxser_set_termios, - .stop = mxser_stop, - .start = mxser_start, - .hangup = mxser_hangup, - .break_ctl = mxser_rs_break, - .wait_until_sent = mxser_wait_until_sent, - .tiocmget = mxser_tiocmget, - .tiocmset = mxser_tiocmset, - .get_icount = mxser_get_icount, -}; - -struct tty_port_operations mxser_port_ops = { - .carrier_raised = mxser_carrier_raised, - .dtr_rts = mxser_dtr_rts, - .activate = mxser_activate, - .shutdown = mxser_shutdown_port, -}; - -/* - * The MOXA Smartio/Industio serial driver boot-time initialization code! - */ - -static void mxser_release_ISA_res(struct mxser_board *brd) -{ - free_irq(brd->irq, brd); - release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - release_region(brd->vector, 1); -} - -static int __devinit mxser_initbrd(struct mxser_board *brd, - struct pci_dev *pdev) -{ - struct mxser_port *info; - unsigned int i; - int retval; - - printk(KERN_INFO "mxser: max. baud rate = %d bps\n", - brd->ports[0].max_baud); - - for (i = 0; i < brd->info->nports; i++) { - info = &brd->ports[i]; - tty_port_init(&info->port); - info->port.ops = &mxser_port_ops; - info->board = brd; - info->stop_rx = 0; - info->ldisc_stop_rx = 0; - - /* Enhance mode enabled here */ - if (brd->chip_flag != MOXA_OTHER_UART) - mxser_enable_must_enchance_mode(info->ioaddr); - - info->port.flags = ASYNC_SHARE_IRQ; - info->type = brd->uart_type; - - process_txrx_fifo(info); - - info->custom_divisor = info->baud_base * 16; - info->port.close_delay = 5 * HZ / 10; - info->port.closing_wait = 30 * HZ; - info->normal_termios = mxvar_sdriver->init_termios; - memset(&info->mon_data, 0, sizeof(struct mxser_mon)); - info->err_shadow = 0; - spin_lock_init(&info->slock); - - /* before set INT ISR, disable all int */ - outb(inb(info->ioaddr + UART_IER) & 0xf0, - info->ioaddr + UART_IER); - } - - retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", - brd); - if (retval) - printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " - "conflict with another device.\n", - brd->info->name, brd->irq); - - return retval; -} - -static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) -{ - int id, i, bits; - unsigned short regs[16], irq; - unsigned char scratch, scratch2; - - brd->chip_flag = MOXA_OTHER_UART; - - id = mxser_read_register(cap, regs); - switch (id) { - case C168_ASIC_ID: - brd->info = &mxser_cards[0]; - break; - case C104_ASIC_ID: - brd->info = &mxser_cards[1]; - break; - case CI104J_ASIC_ID: - brd->info = &mxser_cards[2]; - break; - case C102_ASIC_ID: - brd->info = &mxser_cards[5]; - break; - case CI132_ASIC_ID: - brd->info = &mxser_cards[6]; - break; - case CI134_ASIC_ID: - brd->info = &mxser_cards[7]; - break; - default: - return 0; - } - - irq = 0; - /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) - Flag-hack checks if configuration should be read as 2-port here. */ - if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - if (irq != (regs[9] & 0xFF00)) - goto err_irqconflict; - } else if (brd->info->nports == 4) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if (irq != regs[9]) - goto err_irqconflict; - } else if (brd->info->nports == 8) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if ((irq != regs[9]) || (irq != regs[10])) - goto err_irqconflict; - } - - if (!irq) { - printk(KERN_ERR "mxser: interrupt number unset\n"); - return -EIO; - } - brd->irq = ((int)(irq & 0xF000) >> 12); - for (i = 0; i < 8; i++) - brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; - if ((regs[12] & 0x80) == 0) { - printk(KERN_ERR "mxser: invalid interrupt vector\n"); - return -EIO; - } - brd->vector = (int)regs[11]; /* interrupt vector */ - if (id == 1) - brd->vector_mask = 0x00FF; - else - brd->vector_mask = 0x000F; - for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { - if (regs[12] & bits) { - brd->ports[i].baud_base = 921600; - brd->ports[i].max_baud = 921600; - } else { - brd->ports[i].baud_base = 115200; - brd->ports[i].max_baud = 115200; - } - } - scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); - outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); - outb(0, cap + UART_EFR); /* EFR is the same as FCR */ - outb(scratch2, cap + UART_LCR); - outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); - scratch = inb(cap + UART_IIR); - - if (scratch & 0xC0) - brd->uart_type = PORT_16550A; - else - brd->uart_type = PORT_16450; - if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, - "mxser(IO)")) { - printk(KERN_ERR "mxser: can't request ports I/O region: " - "0x%.8lx-0x%.8lx\n", - brd->ports[0].ioaddr, brd->ports[0].ioaddr + - 8 * brd->info->nports - 1); - return -EIO; - } - if (!request_region(brd->vector, 1, "mxser(vector)")) { - release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - printk(KERN_ERR "mxser: can't request interrupt vector region: " - "0x%.8lx-0x%.8lx\n", - brd->ports[0].ioaddr, brd->ports[0].ioaddr + - 8 * brd->info->nports - 1); - return -EIO; - } - return brd->info->nports; - -err_irqconflict: - printk(KERN_ERR "mxser: invalid interrupt number\n"); - return -EIO; -} - -static int __devinit mxser_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ -#ifdef CONFIG_PCI - struct mxser_board *brd; - unsigned int i, j; - unsigned long ioaddress; - int retval = -EINVAL; - - for (i = 0; i < MXSER_BOARDS; i++) - if (mxser_boards[i].info == NULL) - break; - - if (i >= MXSER_BOARDS) { - dev_err(&pdev->dev, "too many boards found (maximum %d), board " - "not configured\n", MXSER_BOARDS); - goto err; - } - - brd = &mxser_boards[i]; - brd->idx = i * MXSER_PORTS_PER_BOARD; - dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n", - mxser_cards[ent->driver_data].name, - pdev->bus->number, PCI_SLOT(pdev->devfn)); - - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "PCI enable failed\n"); - goto err; - } - - /* io address */ - ioaddress = pci_resource_start(pdev, 2); - retval = pci_request_region(pdev, 2, "mxser(IO)"); - if (retval) - goto err_dis; - - brd->info = &mxser_cards[ent->driver_data]; - for (i = 0; i < brd->info->nports; i++) - brd->ports[i].ioaddr = ioaddress + 8 * i; - - /* vector */ - ioaddress = pci_resource_start(pdev, 3); - retval = pci_request_region(pdev, 3, "mxser(vector)"); - if (retval) - goto err_zero; - brd->vector = ioaddress; - - /* irq */ - brd->irq = pdev->irq; - - brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); - brd->uart_type = PORT_16550A; - brd->vector_mask = 0; - - for (i = 0; i < brd->info->nports; i++) { - for (j = 0; j < UART_INFO_NUM; j++) { - if (Gpci_uart_info[j].type == brd->chip_flag) { - brd->ports[i].max_baud = - Gpci_uart_info[j].max_baud; - - /* exception....CP-102 */ - if (brd->info->flags & MXSER_HIGHBAUD) - brd->ports[i].max_baud = 921600; - break; - } - } - } - - if (brd->chip_flag == MOXA_MUST_MU860_HWID) { - for (i = 0; i < brd->info->nports; i++) { - if (i < 4) - brd->ports[i].opmode_ioaddr = ioaddress + 4; - else - brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; - } - outb(0, ioaddress + 4); /* default set to RS232 mode */ - outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ - } - - for (i = 0; i < brd->info->nports; i++) { - brd->vector_mask |= (1 << i); - brd->ports[i].baud_base = 921600; - } - - /* mxser_initbrd will hook ISR. */ - retval = mxser_initbrd(brd, pdev); - if (retval) - goto err_rel3; - - for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev); - - pci_set_drvdata(pdev, brd); - - return 0; -err_rel3: - pci_release_region(pdev, 3); -err_zero: - brd->info = NULL; - pci_release_region(pdev, 2); -err_dis: - pci_disable_device(pdev); -err: - return retval; -#else - return -ENODEV; -#endif -} - -static void __devexit mxser_remove(struct pci_dev *pdev) -{ -#ifdef CONFIG_PCI - struct mxser_board *brd = pci_get_drvdata(pdev); - unsigned int i; - - for (i = 0; i < brd->info->nports; i++) - tty_unregister_device(mxvar_sdriver, brd->idx + i); - - free_irq(pdev->irq, brd); - pci_release_region(pdev, 2); - pci_release_region(pdev, 3); - pci_disable_device(pdev); - brd->info = NULL; -#endif -} - -static struct pci_driver mxser_driver = { - .name = "mxser", - .id_table = mxser_pcibrds, - .probe = mxser_probe, - .remove = __devexit_p(mxser_remove) -}; - -static int __init mxser_module_init(void) -{ - struct mxser_board *brd; - unsigned int b, i, m; - int retval; - - mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); - if (!mxvar_sdriver) - return -ENOMEM; - - printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", - MXSER_VERSION); - - /* Initialize the tty_driver structure */ - mxvar_sdriver->owner = THIS_MODULE; - mxvar_sdriver->magic = TTY_DRIVER_MAGIC; - mxvar_sdriver->name = "ttyMI"; - mxvar_sdriver->major = ttymajor; - mxvar_sdriver->minor_start = 0; - mxvar_sdriver->num = MXSER_PORTS + 1; - mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; - mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; - mxvar_sdriver->init_termios = tty_std_termios; - mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; - mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(mxvar_sdriver, &mxser_ops); - - retval = tty_register_driver(mxvar_sdriver); - if (retval) { - printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " - "tty driver !\n"); - goto err_put; - } - - /* Start finding ISA boards here */ - for (m = 0, b = 0; b < MXSER_BOARDS; b++) { - if (!ioaddr[b]) - continue; - - brd = &mxser_boards[m]; - retval = mxser_get_ISA_conf(ioaddr[b], brd); - if (retval <= 0) { - brd->info = NULL; - continue; - } - - printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n", - brd->info->name, ioaddr[b]); - - /* mxser_initbrd will hook ISR. */ - if (mxser_initbrd(brd, NULL) < 0) { - brd->info = NULL; - continue; - } - - brd->idx = m * MXSER_PORTS_PER_BOARD; - for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, NULL); - - m++; - } - - retval = pci_register_driver(&mxser_driver); - if (retval) { - printk(KERN_ERR "mxser: can't register pci driver\n"); - if (!m) { - retval = -ENODEV; - goto err_unr; - } /* else: we have some ISA cards under control */ - } - - return 0; -err_unr: - tty_unregister_driver(mxvar_sdriver); -err_put: - put_tty_driver(mxvar_sdriver); - return retval; -} - -static void __exit mxser_module_exit(void) -{ - unsigned int i, j; - - pci_unregister_driver(&mxser_driver); - - for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ - if (mxser_boards[i].info != NULL) - for (j = 0; j < mxser_boards[i].info->nports; j++) - tty_unregister_device(mxvar_sdriver, - mxser_boards[i].idx + j); - tty_unregister_driver(mxvar_sdriver); - put_tty_driver(mxvar_sdriver); - - for (i = 0; i < MXSER_BOARDS; i++) - if (mxser_boards[i].info != NULL) - mxser_release_ISA_res(&mxser_boards[i]); -} - -module_init(mxser_module_init); -module_exit(mxser_module_exit); diff --git a/drivers/char/mxser.h b/drivers/char/mxser.h deleted file mode 100644 index 41878a69203d..000000000000 --- a/drivers/char/mxser.h +++ /dev/null @@ -1,150 +0,0 @@ -#ifndef _MXSER_H -#define _MXSER_H - -/* - * Semi-public control interfaces - */ - -/* - * MOXA ioctls - */ - -#define MOXA 0x400 -#define MOXA_GETDATACOUNT (MOXA + 23) -#define MOXA_DIAGNOSE (MOXA + 50) -#define MOXA_CHKPORTENABLE (MOXA + 60) -#define MOXA_HighSpeedOn (MOXA + 61) -#define MOXA_GET_MAJOR (MOXA + 63) -#define MOXA_GETMSTATUS (MOXA + 65) -#define MOXA_SET_OP_MODE (MOXA + 66) -#define MOXA_GET_OP_MODE (MOXA + 67) - -#define RS232_MODE 0 -#define RS485_2WIRE_MODE 1 -#define RS422_MODE 2 -#define RS485_4WIRE_MODE 3 -#define OP_MODE_MASK 3 - -#define MOXA_SDS_RSTICOUNTER (MOXA + 69) -#define MOXA_ASPP_OQUEUE (MOXA + 70) -#define MOXA_ASPP_MON (MOXA + 73) -#define MOXA_ASPP_LSTATUS (MOXA + 74) -#define MOXA_ASPP_MON_EXT (MOXA + 75) -#define MOXA_SET_BAUD_METHOD (MOXA + 76) - -/* --------------------------------------------------- */ - -#define NPPI_NOTIFY_PARITY 0x01 -#define NPPI_NOTIFY_FRAMING 0x02 -#define NPPI_NOTIFY_HW_OVERRUN 0x04 -#define NPPI_NOTIFY_SW_OVERRUN 0x08 -#define NPPI_NOTIFY_BREAK 0x10 - -#define NPPI_NOTIFY_CTSHOLD 0x01 /* Tx hold by CTS low */ -#define NPPI_NOTIFY_DSRHOLD 0x02 /* Tx hold by DSR low */ -#define NPPI_NOTIFY_XOFFHOLD 0x08 /* Tx hold by Xoff received */ -#define NPPI_NOTIFY_XOFFXENT 0x10 /* Xoff Sent */ - -/* follow just for Moxa Must chip define. */ -/* */ -/* when LCR register (offset 0x03) write following value, */ -/* the Must chip will enter enchance mode. And write value */ -/* on EFR (offset 0x02) bit 6,7 to change bank. */ -#define MOXA_MUST_ENTER_ENCHANCE 0xBF - -/* when enhance mode enable, access on general bank register */ -#define MOXA_MUST_GDL_REGISTER 0x07 -#define MOXA_MUST_GDL_MASK 0x7F -#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 - -#define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ -/* enchance register bank select and enchance mode setting register */ -/* when LCR register equal to 0xBF */ -#define MOXA_MUST_EFR_REGISTER 0x02 -/* enchance mode enable */ -#define MOXA_MUST_EFR_EFRB_ENABLE 0x10 -/* enchance reister bank set 0, 1, 2 */ -#define MOXA_MUST_EFR_BANK0 0x00 -#define MOXA_MUST_EFR_BANK1 0x40 -#define MOXA_MUST_EFR_BANK2 0x80 -#define MOXA_MUST_EFR_BANK3 0xC0 -#define MOXA_MUST_EFR_BANK_MASK 0xC0 - -/* set XON1 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XON1_REGISTER 0x04 - -/* set XON2 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XON2_REGISTER 0x05 - -/* set XOFF1 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XOFF1_REGISTER 0x06 - -/* set XOFF2 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XOFF2_REGISTER 0x07 - -#define MOXA_MUST_RBRTL_REGISTER 0x04 -#define MOXA_MUST_RBRTH_REGISTER 0x05 -#define MOXA_MUST_RBRTI_REGISTER 0x06 -#define MOXA_MUST_THRTL_REGISTER 0x07 -#define MOXA_MUST_ENUM_REGISTER 0x04 -#define MOXA_MUST_HWID_REGISTER 0x05 -#define MOXA_MUST_ECR_REGISTER 0x06 -#define MOXA_MUST_CSR_REGISTER 0x07 - -/* good data mode enable */ -#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 -/* only good data put into RxFIFO */ -#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 - -/* enable CTS interrupt */ -#define MOXA_MUST_IER_ECTSI 0x80 -/* enable RTS interrupt */ -#define MOXA_MUST_IER_ERTSI 0x40 -/* enable Xon/Xoff interrupt */ -#define MOXA_MUST_IER_XINT 0x20 -/* enable GDA interrupt */ -#define MOXA_MUST_IER_EGDAI 0x10 - -#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) - -/* GDA interrupt pending */ -#define MOXA_MUST_IIR_GDA 0x1C -#define MOXA_MUST_IIR_RDA 0x04 -#define MOXA_MUST_IIR_RTO 0x0C -#define MOXA_MUST_IIR_LSR 0x06 - -/* recieved Xon/Xoff or specical interrupt pending */ -#define MOXA_MUST_IIR_XSC 0x10 - -/* RTS/CTS change state interrupt pending */ -#define MOXA_MUST_IIR_RTSCTS 0x20 -#define MOXA_MUST_IIR_MASK 0x3E - -#define MOXA_MUST_MCR_XON_FLAG 0x40 -#define MOXA_MUST_MCR_XON_ANY 0x80 -#define MOXA_MUST_MCR_TX_XON 0x08 - -/* software flow control on chip mask value */ -#define MOXA_MUST_EFR_SF_MASK 0x0F -/* send Xon1/Xoff1 */ -#define MOXA_MUST_EFR_SF_TX1 0x08 -/* send Xon2/Xoff2 */ -#define MOXA_MUST_EFR_SF_TX2 0x04 -/* send Xon1,Xon2/Xoff1,Xoff2 */ -#define MOXA_MUST_EFR_SF_TX12 0x0C -/* don't send Xon/Xoff */ -#define MOXA_MUST_EFR_SF_TX_NO 0x00 -/* Tx software flow control mask */ -#define MOXA_MUST_EFR_SF_TX_MASK 0x0C -/* don't receive Xon/Xoff */ -#define MOXA_MUST_EFR_SF_RX_NO 0x00 -/* receive Xon1/Xoff1 */ -#define MOXA_MUST_EFR_SF_RX1 0x02 -/* receive Xon2/Xoff2 */ -#define MOXA_MUST_EFR_SF_RX2 0x01 -/* receive Xon1,Xon2/Xoff1,Xoff2 */ -#define MOXA_MUST_EFR_SF_RX12 0x03 -/* Rx software flow control mask */ -#define MOXA_MUST_EFR_SF_RX_MASK 0x03 - -#endif diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c deleted file mode 100644 index 513ba12064ea..000000000000 --- a/drivers/char/nozomi.c +++ /dev/null @@ -1,1993 +0,0 @@ -/* - * nozomi.c -- HSDPA driver Broadband Wireless Data Card - Globe Trotter - * - * Written by: Ulf Jakobsson, - * Jan Åkerfeldt, - * Stefan Thomasson, - * - * Maintained by: Paul Hardwick (p.hardwick@option.com) - * - * Patches: - * Locking code changes for Vodafone by Sphere Systems Ltd, - * Andrew Bird (ajb@spheresystems.co.uk ) - * & Phil Sanderson - * - * Source has been ported from an implementation made by Filip Aben @ Option - * - * -------------------------------------------------------------------------- - * - * Copyright (c) 2005,2006 Option Wireless Sweden AB - * Copyright (c) 2006 Sphere Systems Ltd - * Copyright (c) 2006 Option Wireless n/v - * All rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * -------------------------------------------------------------------------- - */ - -/* Enable this to have a lot of debug printouts */ -#define DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - - -#define VERSION_STRING DRIVER_DESC " 2.1d (build date: " \ - __DATE__ " " __TIME__ ")" - -/* Macros definitions */ - -/* Default debug printout level */ -#define NOZOMI_DEBUG_LEVEL 0x00 - -#define P_BUF_SIZE 128 -#define NFO(_err_flag_, args...) \ -do { \ - char tmp[P_BUF_SIZE]; \ - snprintf(tmp, sizeof(tmp), ##args); \ - printk(_err_flag_ "[%d] %s(): %s\n", __LINE__, \ - __func__, tmp); \ -} while (0) - -#define DBG1(args...) D_(0x01, ##args) -#define DBG2(args...) D_(0x02, ##args) -#define DBG3(args...) D_(0x04, ##args) -#define DBG4(args...) D_(0x08, ##args) -#define DBG5(args...) D_(0x10, ##args) -#define DBG6(args...) D_(0x20, ##args) -#define DBG7(args...) D_(0x40, ##args) -#define DBG8(args...) D_(0x80, ##args) - -#ifdef DEBUG -/* Do we need this settable at runtime? */ -static int debug = NOZOMI_DEBUG_LEVEL; - -#define D(lvl, args...) do \ - {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \ - while (0) -#define D_(lvl, args...) D(lvl, ##args) - -/* These printouts are always printed */ - -#else -static int debug; -#define D_(lvl, args...) -#endif - -/* TODO: rewrite to optimize macros... */ - -#define TMP_BUF_MAX 256 - -#define DUMP(buf__,len__) \ - do { \ - char tbuf[TMP_BUF_MAX] = {0};\ - if (len__ > 1) {\ - snprintf(tbuf, len__ > TMP_BUF_MAX ? TMP_BUF_MAX : len__, "%s", buf__);\ - if (tbuf[len__-2] == '\r') {\ - tbuf[len__-2] = 'r';\ - } \ - DBG1("SENDING: '%s' (%d+n)", tbuf, len__);\ - } else {\ - DBG1("SENDING: '%s' (%d)", tbuf, len__);\ - } \ -} while (0) - -/* Defines */ -#define NOZOMI_NAME "nozomi" -#define NOZOMI_NAME_TTY "nozomi_tty" -#define DRIVER_DESC "Nozomi driver" - -#define NTTY_TTY_MAXMINORS 256 -#define NTTY_FIFO_BUFFER_SIZE 8192 - -/* Must be power of 2 */ -#define FIFO_BUFFER_SIZE_UL 8192 - -/* Size of tmp send buffer to card */ -#define SEND_BUF_MAX 1024 -#define RECEIVE_BUF_MAX 4 - - -#define R_IIR 0x0000 /* Interrupt Identity Register */ -#define R_FCR 0x0000 /* Flow Control Register */ -#define R_IER 0x0004 /* Interrupt Enable Register */ - -#define CONFIG_MAGIC 0xEFEFFEFE -#define TOGGLE_VALID 0x0000 - -/* Definition of interrupt tokens */ -#define MDM_DL1 0x0001 -#define MDM_UL1 0x0002 -#define MDM_DL2 0x0004 -#define MDM_UL2 0x0008 -#define DIAG_DL1 0x0010 -#define DIAG_DL2 0x0020 -#define DIAG_UL 0x0040 -#define APP1_DL 0x0080 -#define APP1_UL 0x0100 -#define APP2_DL 0x0200 -#define APP2_UL 0x0400 -#define CTRL_DL 0x0800 -#define CTRL_UL 0x1000 -#define RESET 0x8000 - -#define MDM_DL (MDM_DL1 | MDM_DL2) -#define MDM_UL (MDM_UL1 | MDM_UL2) -#define DIAG_DL (DIAG_DL1 | DIAG_DL2) - -/* modem signal definition */ -#define CTRL_DSR 0x0001 -#define CTRL_DCD 0x0002 -#define CTRL_RI 0x0004 -#define CTRL_CTS 0x0008 - -#define CTRL_DTR 0x0001 -#define CTRL_RTS 0x0002 - -#define MAX_PORT 4 -#define NOZOMI_MAX_PORTS 5 -#define NOZOMI_MAX_CARDS (NTTY_TTY_MAXMINORS / MAX_PORT) - -/* Type definitions */ - -/* - * There are two types of nozomi cards, - * one with 2048 memory and with 8192 memory - */ -enum card_type { - F32_2 = 2048, /* 512 bytes downlink + uplink * 2 -> 2048 */ - F32_8 = 8192, /* 3072 bytes downl. + 1024 bytes uplink * 2 -> 8192 */ -}; - -/* Initialization states a card can be in */ -enum card_state { - NOZOMI_STATE_UKNOWN = 0, - NOZOMI_STATE_ENABLED = 1, /* pci device enabled */ - NOZOMI_STATE_ALLOCATED = 2, /* config setup done */ - NOZOMI_STATE_READY = 3, /* flowcontrols received */ -}; - -/* Two different toggle channels exist */ -enum channel_type { - CH_A = 0, - CH_B = 1, -}; - -/* Port definition for the card regarding flow control */ -enum ctrl_port_type { - CTRL_CMD = 0, - CTRL_MDM = 1, - CTRL_DIAG = 2, - CTRL_APP1 = 3, - CTRL_APP2 = 4, - CTRL_ERROR = -1, -}; - -/* Ports that the nozomi has */ -enum port_type { - PORT_MDM = 0, - PORT_DIAG = 1, - PORT_APP1 = 2, - PORT_APP2 = 3, - PORT_CTRL = 4, - PORT_ERROR = -1, -}; - -#ifdef __BIG_ENDIAN -/* Big endian */ - -struct toggles { - unsigned int enabled:5; /* - * Toggle fields are valid if enabled is 0, - * else A-channels must always be used. - */ - unsigned int diag_dl:1; - unsigned int mdm_dl:1; - unsigned int mdm_ul:1; -} __attribute__ ((packed)); - -/* Configuration table to read at startup of card */ -/* Is for now only needed during initialization phase */ -struct config_table { - u32 signature; - u16 product_information; - u16 version; - u8 pad3[3]; - struct toggles toggle; - u8 pad1[4]; - u16 dl_mdm_len1; /* - * If this is 64, it can hold - * 60 bytes + 4 that is length field - */ - u16 dl_start; - - u16 dl_diag_len1; - u16 dl_mdm_len2; /* - * If this is 64, it can hold - * 60 bytes + 4 that is length field - */ - u16 dl_app1_len; - - u16 dl_diag_len2; - u16 dl_ctrl_len; - u16 dl_app2_len; - u8 pad2[16]; - u16 ul_mdm_len1; - u16 ul_start; - u16 ul_diag_len; - u16 ul_mdm_len2; - u16 ul_app1_len; - u16 ul_app2_len; - u16 ul_ctrl_len; -} __attribute__ ((packed)); - -/* This stores all control downlink flags */ -struct ctrl_dl { - u8 port; - unsigned int reserved:4; - unsigned int CTS:1; - unsigned int RI:1; - unsigned int DCD:1; - unsigned int DSR:1; -} __attribute__ ((packed)); - -/* This stores all control uplink flags */ -struct ctrl_ul { - u8 port; - unsigned int reserved:6; - unsigned int RTS:1; - unsigned int DTR:1; -} __attribute__ ((packed)); - -#else -/* Little endian */ - -/* This represents the toggle information */ -struct toggles { - unsigned int mdm_ul:1; - unsigned int mdm_dl:1; - unsigned int diag_dl:1; - unsigned int enabled:5; /* - * Toggle fields are valid if enabled is 0, - * else A-channels must always be used. - */ -} __attribute__ ((packed)); - -/* Configuration table to read at startup of card */ -struct config_table { - u32 signature; - u16 version; - u16 product_information; - struct toggles toggle; - u8 pad1[7]; - u16 dl_start; - u16 dl_mdm_len1; /* - * If this is 64, it can hold - * 60 bytes + 4 that is length field - */ - u16 dl_mdm_len2; - u16 dl_diag_len1; - u16 dl_diag_len2; - u16 dl_app1_len; - u16 dl_app2_len; - u16 dl_ctrl_len; - u8 pad2[16]; - u16 ul_start; - u16 ul_mdm_len2; - u16 ul_mdm_len1; - u16 ul_diag_len; - u16 ul_app1_len; - u16 ul_app2_len; - u16 ul_ctrl_len; -} __attribute__ ((packed)); - -/* This stores all control downlink flags */ -struct ctrl_dl { - unsigned int DSR:1; - unsigned int DCD:1; - unsigned int RI:1; - unsigned int CTS:1; - unsigned int reserverd:4; - u8 port; -} __attribute__ ((packed)); - -/* This stores all control uplink flags */ -struct ctrl_ul { - unsigned int DTR:1; - unsigned int RTS:1; - unsigned int reserved:6; - u8 port; -} __attribute__ ((packed)); -#endif - -/* This holds all information that is needed regarding a port */ -struct port { - struct tty_port port; - u8 update_flow_control; - struct ctrl_ul ctrl_ul; - struct ctrl_dl ctrl_dl; - struct kfifo fifo_ul; - void __iomem *dl_addr[2]; - u32 dl_size[2]; - u8 toggle_dl; - void __iomem *ul_addr[2]; - u32 ul_size[2]; - u8 toggle_ul; - u16 token_dl; - - /* mutex to ensure one access patch to this port */ - struct mutex tty_sem; - wait_queue_head_t tty_wait; - struct async_icount tty_icount; - - struct nozomi *dc; -}; - -/* Private data one for each card in the system */ -struct nozomi { - void __iomem *base_addr; - unsigned long flip; - - /* Pointers to registers */ - void __iomem *reg_iir; - void __iomem *reg_fcr; - void __iomem *reg_ier; - - u16 last_ier; - enum card_type card_type; - struct config_table config_table; /* Configuration table */ - struct pci_dev *pdev; - struct port port[NOZOMI_MAX_PORTS]; - u8 *send_buf; - - spinlock_t spin_mutex; /* secures access to registers and tty */ - - unsigned int index_start; - enum card_state state; - u32 open_ttys; -}; - -/* This is a data packet that is read or written to/from card */ -struct buffer { - u32 size; /* size is the length of the data buffer */ - u8 *data; -} __attribute__ ((packed)); - -/* Global variables */ -static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = { - {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */ - {}, -}; - -MODULE_DEVICE_TABLE(pci, nozomi_pci_tbl); - -static struct nozomi *ndevs[NOZOMI_MAX_CARDS]; -static struct tty_driver *ntty_driver; - -static const struct tty_port_operations noz_tty_port_ops; - -/* - * find card by tty_index - */ -static inline struct nozomi *get_dc_by_tty(const struct tty_struct *tty) -{ - return tty ? ndevs[tty->index / MAX_PORT] : NULL; -} - -static inline struct port *get_port_by_tty(const struct tty_struct *tty) -{ - struct nozomi *ndev = get_dc_by_tty(tty); - return ndev ? &ndev->port[tty->index % MAX_PORT] : NULL; -} - -/* - * TODO: - * -Optimize - * -Rewrite cleaner - */ - -static void read_mem32(u32 *buf, const void __iomem *mem_addr_start, - u32 size_bytes) -{ - u32 i = 0; - const u32 __iomem *ptr = mem_addr_start; - u16 *buf16; - - if (unlikely(!ptr || !buf)) - goto out; - - /* shortcut for extremely often used cases */ - switch (size_bytes) { - case 2: /* 2 bytes */ - buf16 = (u16 *) buf; - *buf16 = __le16_to_cpu(readw(ptr)); - goto out; - break; - case 4: /* 4 bytes */ - *(buf) = __le32_to_cpu(readl(ptr)); - goto out; - break; - } - - while (i < size_bytes) { - if (size_bytes - i == 2) { - /* Handle 2 bytes in the end */ - buf16 = (u16 *) buf; - *(buf16) = __le16_to_cpu(readw(ptr)); - i += 2; - } else { - /* Read 4 bytes */ - *(buf) = __le32_to_cpu(readl(ptr)); - i += 4; - } - buf++; - ptr++; - } -out: - return; -} - -/* - * TODO: - * -Optimize - * -Rewrite cleaner - */ -static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf, - u32 size_bytes) -{ - u32 i = 0; - u32 __iomem *ptr = mem_addr_start; - const u16 *buf16; - - if (unlikely(!ptr || !buf)) - return 0; - - /* shortcut for extremely often used cases */ - switch (size_bytes) { - case 2: /* 2 bytes */ - buf16 = (const u16 *)buf; - writew(__cpu_to_le16(*buf16), ptr); - return 2; - break; - case 1: /* - * also needs to write 4 bytes in this case - * so falling through.. - */ - case 4: /* 4 bytes */ - writel(__cpu_to_le32(*buf), ptr); - return 4; - break; - } - - while (i < size_bytes) { - if (size_bytes - i == 2) { - /* 2 bytes */ - buf16 = (const u16 *)buf; - writew(__cpu_to_le16(*buf16), ptr); - i += 2; - } else { - /* 4 bytes */ - writel(__cpu_to_le32(*buf), ptr); - i += 4; - } - buf++; - ptr++; - } - return i; -} - -/* Setup pointers to different channels and also setup buffer sizes. */ -static void setup_memory(struct nozomi *dc) -{ - void __iomem *offset = dc->base_addr + dc->config_table.dl_start; - /* The length reported is including the length field of 4 bytes, - * hence subtract with 4. - */ - const u16 buff_offset = 4; - - /* Modem port dl configuration */ - dc->port[PORT_MDM].dl_addr[CH_A] = offset; - dc->port[PORT_MDM].dl_addr[CH_B] = - (offset += dc->config_table.dl_mdm_len1); - dc->port[PORT_MDM].dl_size[CH_A] = - dc->config_table.dl_mdm_len1 - buff_offset; - dc->port[PORT_MDM].dl_size[CH_B] = - dc->config_table.dl_mdm_len2 - buff_offset; - - /* Diag port dl configuration */ - dc->port[PORT_DIAG].dl_addr[CH_A] = - (offset += dc->config_table.dl_mdm_len2); - dc->port[PORT_DIAG].dl_size[CH_A] = - dc->config_table.dl_diag_len1 - buff_offset; - dc->port[PORT_DIAG].dl_addr[CH_B] = - (offset += dc->config_table.dl_diag_len1); - dc->port[PORT_DIAG].dl_size[CH_B] = - dc->config_table.dl_diag_len2 - buff_offset; - - /* App1 port dl configuration */ - dc->port[PORT_APP1].dl_addr[CH_A] = - (offset += dc->config_table.dl_diag_len2); - dc->port[PORT_APP1].dl_size[CH_A] = - dc->config_table.dl_app1_len - buff_offset; - - /* App2 port dl configuration */ - dc->port[PORT_APP2].dl_addr[CH_A] = - (offset += dc->config_table.dl_app1_len); - dc->port[PORT_APP2].dl_size[CH_A] = - dc->config_table.dl_app2_len - buff_offset; - - /* Ctrl dl configuration */ - dc->port[PORT_CTRL].dl_addr[CH_A] = - (offset += dc->config_table.dl_app2_len); - dc->port[PORT_CTRL].dl_size[CH_A] = - dc->config_table.dl_ctrl_len - buff_offset; - - offset = dc->base_addr + dc->config_table.ul_start; - - /* Modem Port ul configuration */ - dc->port[PORT_MDM].ul_addr[CH_A] = offset; - dc->port[PORT_MDM].ul_size[CH_A] = - dc->config_table.ul_mdm_len1 - buff_offset; - dc->port[PORT_MDM].ul_addr[CH_B] = - (offset += dc->config_table.ul_mdm_len1); - dc->port[PORT_MDM].ul_size[CH_B] = - dc->config_table.ul_mdm_len2 - buff_offset; - - /* Diag port ul configuration */ - dc->port[PORT_DIAG].ul_addr[CH_A] = - (offset += dc->config_table.ul_mdm_len2); - dc->port[PORT_DIAG].ul_size[CH_A] = - dc->config_table.ul_diag_len - buff_offset; - - /* App1 port ul configuration */ - dc->port[PORT_APP1].ul_addr[CH_A] = - (offset += dc->config_table.ul_diag_len); - dc->port[PORT_APP1].ul_size[CH_A] = - dc->config_table.ul_app1_len - buff_offset; - - /* App2 port ul configuration */ - dc->port[PORT_APP2].ul_addr[CH_A] = - (offset += dc->config_table.ul_app1_len); - dc->port[PORT_APP2].ul_size[CH_A] = - dc->config_table.ul_app2_len - buff_offset; - - /* Ctrl ul configuration */ - dc->port[PORT_CTRL].ul_addr[CH_A] = - (offset += dc->config_table.ul_app2_len); - dc->port[PORT_CTRL].ul_size[CH_A] = - dc->config_table.ul_ctrl_len - buff_offset; -} - -/* Dump config table under initalization phase */ -#ifdef DEBUG -static void dump_table(const struct nozomi *dc) -{ - DBG3("signature: 0x%08X", dc->config_table.signature); - DBG3("version: 0x%04X", dc->config_table.version); - DBG3("product_information: 0x%04X", \ - dc->config_table.product_information); - DBG3("toggle enabled: %d", dc->config_table.toggle.enabled); - DBG3("toggle up_mdm: %d", dc->config_table.toggle.mdm_ul); - DBG3("toggle dl_mdm: %d", dc->config_table.toggle.mdm_dl); - DBG3("toggle dl_dbg: %d", dc->config_table.toggle.diag_dl); - - DBG3("dl_start: 0x%04X", dc->config_table.dl_start); - DBG3("dl_mdm_len0: 0x%04X, %d", dc->config_table.dl_mdm_len1, - dc->config_table.dl_mdm_len1); - DBG3("dl_mdm_len1: 0x%04X, %d", dc->config_table.dl_mdm_len2, - dc->config_table.dl_mdm_len2); - DBG3("dl_diag_len0: 0x%04X, %d", dc->config_table.dl_diag_len1, - dc->config_table.dl_diag_len1); - DBG3("dl_diag_len1: 0x%04X, %d", dc->config_table.dl_diag_len2, - dc->config_table.dl_diag_len2); - DBG3("dl_app1_len: 0x%04X, %d", dc->config_table.dl_app1_len, - dc->config_table.dl_app1_len); - DBG3("dl_app2_len: 0x%04X, %d", dc->config_table.dl_app2_len, - dc->config_table.dl_app2_len); - DBG3("dl_ctrl_len: 0x%04X, %d", dc->config_table.dl_ctrl_len, - dc->config_table.dl_ctrl_len); - DBG3("ul_start: 0x%04X, %d", dc->config_table.ul_start, - dc->config_table.ul_start); - DBG3("ul_mdm_len[0]: 0x%04X, %d", dc->config_table.ul_mdm_len1, - dc->config_table.ul_mdm_len1); - DBG3("ul_mdm_len[1]: 0x%04X, %d", dc->config_table.ul_mdm_len2, - dc->config_table.ul_mdm_len2); - DBG3("ul_diag_len: 0x%04X, %d", dc->config_table.ul_diag_len, - dc->config_table.ul_diag_len); - DBG3("ul_app1_len: 0x%04X, %d", dc->config_table.ul_app1_len, - dc->config_table.ul_app1_len); - DBG3("ul_app2_len: 0x%04X, %d", dc->config_table.ul_app2_len, - dc->config_table.ul_app2_len); - DBG3("ul_ctrl_len: 0x%04X, %d", dc->config_table.ul_ctrl_len, - dc->config_table.ul_ctrl_len); -} -#else -static inline void dump_table(const struct nozomi *dc) { } -#endif - -/* - * Read configuration table from card under intalization phase - * Returns 1 if ok, else 0 - */ -static int nozomi_read_config_table(struct nozomi *dc) -{ - read_mem32((u32 *) &dc->config_table, dc->base_addr + 0, - sizeof(struct config_table)); - - if (dc->config_table.signature != CONFIG_MAGIC) { - dev_err(&dc->pdev->dev, "ConfigTable Bad! 0x%08X != 0x%08X\n", - dc->config_table.signature, CONFIG_MAGIC); - return 0; - } - - if ((dc->config_table.version == 0) - || (dc->config_table.toggle.enabled == TOGGLE_VALID)) { - int i; - DBG1("Second phase, configuring card"); - - setup_memory(dc); - - dc->port[PORT_MDM].toggle_ul = dc->config_table.toggle.mdm_ul; - dc->port[PORT_MDM].toggle_dl = dc->config_table.toggle.mdm_dl; - dc->port[PORT_DIAG].toggle_dl = dc->config_table.toggle.diag_dl; - DBG1("toggle ports: MDM UL:%d MDM DL:%d, DIAG DL:%d", - dc->port[PORT_MDM].toggle_ul, - dc->port[PORT_MDM].toggle_dl, dc->port[PORT_DIAG].toggle_dl); - - dump_table(dc); - - for (i = PORT_MDM; i < MAX_PORT; i++) { - memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); - memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); - } - - /* Enable control channel */ - dc->last_ier = dc->last_ier | CTRL_DL; - writew(dc->last_ier, dc->reg_ier); - - dc->state = NOZOMI_STATE_ALLOCATED; - dev_info(&dc->pdev->dev, "Initialization OK!\n"); - return 1; - } - - if ((dc->config_table.version > 0) - && (dc->config_table.toggle.enabled != TOGGLE_VALID)) { - u32 offset = 0; - DBG1("First phase: pushing upload buffers, clearing download"); - - dev_info(&dc->pdev->dev, "Version of card: %d\n", - dc->config_table.version); - - /* Here we should disable all I/O over F32. */ - setup_memory(dc); - - /* - * We should send ALL channel pair tokens back along - * with reset token - */ - - /* push upload modem buffers */ - write_mem32(dc->port[PORT_MDM].ul_addr[CH_A], - (u32 *) &offset, 4); - write_mem32(dc->port[PORT_MDM].ul_addr[CH_B], - (u32 *) &offset, 4); - - writew(MDM_UL | DIAG_DL | MDM_DL, dc->reg_fcr); - - DBG1("First phase done"); - } - - return 1; -} - -/* Enable uplink interrupts */ -static void enable_transmit_ul(enum port_type port, struct nozomi *dc) -{ - static const u16 mask[] = {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL}; - - if (port < NOZOMI_MAX_PORTS) { - dc->last_ier |= mask[port]; - writew(dc->last_ier, dc->reg_ier); - } else { - dev_err(&dc->pdev->dev, "Called with wrong port?\n"); - } -} - -/* Disable uplink interrupts */ -static void disable_transmit_ul(enum port_type port, struct nozomi *dc) -{ - static const u16 mask[] = - {~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL}; - - if (port < NOZOMI_MAX_PORTS) { - dc->last_ier &= mask[port]; - writew(dc->last_ier, dc->reg_ier); - } else { - dev_err(&dc->pdev->dev, "Called with wrong port?\n"); - } -} - -/* Enable downlink interrupts */ -static void enable_transmit_dl(enum port_type port, struct nozomi *dc) -{ - static const u16 mask[] = {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL}; - - if (port < NOZOMI_MAX_PORTS) { - dc->last_ier |= mask[port]; - writew(dc->last_ier, dc->reg_ier); - } else { - dev_err(&dc->pdev->dev, "Called with wrong port?\n"); - } -} - -/* Disable downlink interrupts */ -static void disable_transmit_dl(enum port_type port, struct nozomi *dc) -{ - static const u16 mask[] = - {~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL}; - - if (port < NOZOMI_MAX_PORTS) { - dc->last_ier &= mask[port]; - writew(dc->last_ier, dc->reg_ier); - } else { - dev_err(&dc->pdev->dev, "Called with wrong port?\n"); - } -} - -/* - * Return 1 - send buffer to card and ack. - * Return 0 - don't ack, don't send buffer to card. - */ -static int send_data(enum port_type index, struct nozomi *dc) -{ - u32 size = 0; - struct port *port = &dc->port[index]; - const u8 toggle = port->toggle_ul; - void __iomem *addr = port->ul_addr[toggle]; - const u32 ul_size = port->ul_size[toggle]; - struct tty_struct *tty = tty_port_tty_get(&port->port); - - /* Get data from tty and place in buf for now */ - size = kfifo_out(&port->fifo_ul, dc->send_buf, - ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); - - if (size == 0) { - DBG4("No more data to send, disable link:"); - tty_kref_put(tty); - return 0; - } - - /* DUMP(buf, size); */ - - /* Write length + data */ - write_mem32(addr, (u32 *) &size, 4); - write_mem32(addr + 4, (u32 *) dc->send_buf, size); - - if (tty) - tty_wakeup(tty); - - tty_kref_put(tty); - return 1; -} - -/* If all data has been read, return 1, else 0 */ -static int receive_data(enum port_type index, struct nozomi *dc) -{ - u8 buf[RECEIVE_BUF_MAX] = { 0 }; - int size; - u32 offset = 4; - struct port *port = &dc->port[index]; - void __iomem *addr = port->dl_addr[port->toggle_dl]; - struct tty_struct *tty = tty_port_tty_get(&port->port); - int i, ret; - - if (unlikely(!tty)) { - DBG1("tty not open for port: %d?", index); - return 1; - } - - read_mem32((u32 *) &size, addr, 4); - /* DBG1( "%d bytes port: %d", size, index); */ - - if (test_bit(TTY_THROTTLED, &tty->flags)) { - DBG1("No room in tty, don't read data, don't ack interrupt, " - "disable interrupt"); - - /* disable interrupt in downlink... */ - disable_transmit_dl(index, dc); - ret = 0; - goto put; - } - - if (unlikely(size == 0)) { - dev_err(&dc->pdev->dev, "size == 0?\n"); - ret = 1; - goto put; - } - - while (size > 0) { - read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX); - - if (size == 1) { - tty_insert_flip_char(tty, buf[0], TTY_NORMAL); - size = 0; - } else if (size < RECEIVE_BUF_MAX) { - size -= tty_insert_flip_string(tty, (char *) buf, size); - } else { - i = tty_insert_flip_string(tty, \ - (char *) buf, RECEIVE_BUF_MAX); - size -= i; - offset += i; - } - } - - set_bit(index, &dc->flip); - ret = 1; -put: - tty_kref_put(tty); - return ret; -} - -/* Debug for interrupts */ -#ifdef DEBUG -static char *interrupt2str(u16 interrupt) -{ - static char buf[TMP_BUF_MAX]; - char *p = buf; - - interrupt & MDM_DL1 ? p += snprintf(p, TMP_BUF_MAX, "MDM_DL1 ") : NULL; - interrupt & MDM_DL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "MDM_DL2 ") : NULL; - - interrupt & MDM_UL1 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "MDM_UL1 ") : NULL; - interrupt & MDM_UL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "MDM_UL2 ") : NULL; - - interrupt & DIAG_DL1 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "DIAG_DL1 ") : NULL; - interrupt & DIAG_DL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "DIAG_DL2 ") : NULL; - - interrupt & DIAG_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "DIAG_UL ") : NULL; - - interrupt & APP1_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "APP1_DL ") : NULL; - interrupt & APP2_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "APP2_DL ") : NULL; - - interrupt & APP1_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "APP1_UL ") : NULL; - interrupt & APP2_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "APP2_UL ") : NULL; - - interrupt & CTRL_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "CTRL_DL ") : NULL; - interrupt & CTRL_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "CTRL_UL ") : NULL; - - interrupt & RESET ? p += snprintf(p, TMP_BUF_MAX - (p - buf), - "RESET ") : NULL; - - return buf; -} -#endif - -/* - * Receive flow control - * Return 1 - If ok, else 0 - */ -static int receive_flow_control(struct nozomi *dc) -{ - enum port_type port = PORT_MDM; - struct ctrl_dl ctrl_dl; - struct ctrl_dl old_ctrl; - u16 enable_ier = 0; - - read_mem32((u32 *) &ctrl_dl, dc->port[PORT_CTRL].dl_addr[CH_A], 2); - - switch (ctrl_dl.port) { - case CTRL_CMD: - DBG1("The Base Band sends this value as a response to a " - "request for IMSI detach sent over the control " - "channel uplink (see section 7.6.1)."); - break; - case CTRL_MDM: - port = PORT_MDM; - enable_ier = MDM_DL; - break; - case CTRL_DIAG: - port = PORT_DIAG; - enable_ier = DIAG_DL; - break; - case CTRL_APP1: - port = PORT_APP1; - enable_ier = APP1_DL; - break; - case CTRL_APP2: - port = PORT_APP2; - enable_ier = APP2_DL; - if (dc->state == NOZOMI_STATE_ALLOCATED) { - /* - * After card initialization the flow control - * received for APP2 is always the last - */ - dc->state = NOZOMI_STATE_READY; - dev_info(&dc->pdev->dev, "Device READY!\n"); - } - break; - default: - dev_err(&dc->pdev->dev, - "ERROR: flow control received for non-existing port\n"); - return 0; - }; - - DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl), - *((u16 *)&ctrl_dl)); - - old_ctrl = dc->port[port].ctrl_dl; - dc->port[port].ctrl_dl = ctrl_dl; - - if (old_ctrl.CTS == 1 && ctrl_dl.CTS == 0) { - DBG1("Disable interrupt (0x%04X) on port: %d", - enable_ier, port); - disable_transmit_ul(port, dc); - - } else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) { - - if (kfifo_len(&dc->port[port].fifo_ul)) { - DBG1("Enable interrupt (0x%04X) on port: %d", - enable_ier, port); - DBG1("Data in buffer [%d], enable transmit! ", - kfifo_len(&dc->port[port].fifo_ul)); - enable_transmit_ul(port, dc); - } else { - DBG1("No data in buffer..."); - } - } - - if (*(u16 *)&old_ctrl == *(u16 *)&ctrl_dl) { - DBG1(" No change in mctrl"); - return 1; - } - /* Update statistics */ - if (old_ctrl.CTS != ctrl_dl.CTS) - dc->port[port].tty_icount.cts++; - if (old_ctrl.DSR != ctrl_dl.DSR) - dc->port[port].tty_icount.dsr++; - if (old_ctrl.RI != ctrl_dl.RI) - dc->port[port].tty_icount.rng++; - if (old_ctrl.DCD != ctrl_dl.DCD) - dc->port[port].tty_icount.dcd++; - - wake_up_interruptible(&dc->port[port].tty_wait); - - DBG1("port: %d DCD(%d), CTS(%d), RI(%d), DSR(%d)", - port, - dc->port[port].tty_icount.dcd, dc->port[port].tty_icount.cts, - dc->port[port].tty_icount.rng, dc->port[port].tty_icount.dsr); - - return 1; -} - -static enum ctrl_port_type port2ctrl(enum port_type port, - const struct nozomi *dc) -{ - switch (port) { - case PORT_MDM: - return CTRL_MDM; - case PORT_DIAG: - return CTRL_DIAG; - case PORT_APP1: - return CTRL_APP1; - case PORT_APP2: - return CTRL_APP2; - default: - dev_err(&dc->pdev->dev, - "ERROR: send flow control " \ - "received for non-existing port\n"); - }; - return CTRL_ERROR; -} - -/* - * Send flow control, can only update one channel at a time - * Return 0 - If we have updated all flow control - * Return 1 - If we need to update more flow control, ack current enable more - */ -static int send_flow_control(struct nozomi *dc) -{ - u32 i, more_flow_control_to_be_updated = 0; - u16 *ctrl; - - for (i = PORT_MDM; i < MAX_PORT; i++) { - if (dc->port[i].update_flow_control) { - if (more_flow_control_to_be_updated) { - /* We have more flow control to be updated */ - return 1; - } - dc->port[i].ctrl_ul.port = port2ctrl(i, dc); - ctrl = (u16 *)&dc->port[i].ctrl_ul; - write_mem32(dc->port[PORT_CTRL].ul_addr[0], \ - (u32 *) ctrl, 2); - dc->port[i].update_flow_control = 0; - more_flow_control_to_be_updated = 1; - } - } - return 0; -} - -/* - * Handle downlink data, ports that are handled are modem and diagnostics - * Return 1 - ok - * Return 0 - toggle fields are out of sync - */ -static int handle_data_dl(struct nozomi *dc, enum port_type port, u8 *toggle, - u16 read_iir, u16 mask1, u16 mask2) -{ - if (*toggle == 0 && read_iir & mask1) { - if (receive_data(port, dc)) { - writew(mask1, dc->reg_fcr); - *toggle = !(*toggle); - } - - if (read_iir & mask2) { - if (receive_data(port, dc)) { - writew(mask2, dc->reg_fcr); - *toggle = !(*toggle); - } - } - } else if (*toggle == 1 && read_iir & mask2) { - if (receive_data(port, dc)) { - writew(mask2, dc->reg_fcr); - *toggle = !(*toggle); - } - - if (read_iir & mask1) { - if (receive_data(port, dc)) { - writew(mask1, dc->reg_fcr); - *toggle = !(*toggle); - } - } - } else { - dev_err(&dc->pdev->dev, "port out of sync!, toggle:%d\n", - *toggle); - return 0; - } - return 1; -} - -/* - * Handle uplink data, this is currently for the modem port - * Return 1 - ok - * Return 0 - toggle field are out of sync - */ -static int handle_data_ul(struct nozomi *dc, enum port_type port, u16 read_iir) -{ - u8 *toggle = &(dc->port[port].toggle_ul); - - if (*toggle == 0 && read_iir & MDM_UL1) { - dc->last_ier &= ~MDM_UL; - writew(dc->last_ier, dc->reg_ier); - if (send_data(port, dc)) { - writew(MDM_UL1, dc->reg_fcr); - dc->last_ier = dc->last_ier | MDM_UL; - writew(dc->last_ier, dc->reg_ier); - *toggle = !*toggle; - } - - if (read_iir & MDM_UL2) { - dc->last_ier &= ~MDM_UL; - writew(dc->last_ier, dc->reg_ier); - if (send_data(port, dc)) { - writew(MDM_UL2, dc->reg_fcr); - dc->last_ier = dc->last_ier | MDM_UL; - writew(dc->last_ier, dc->reg_ier); - *toggle = !*toggle; - } - } - - } else if (*toggle == 1 && read_iir & MDM_UL2) { - dc->last_ier &= ~MDM_UL; - writew(dc->last_ier, dc->reg_ier); - if (send_data(port, dc)) { - writew(MDM_UL2, dc->reg_fcr); - dc->last_ier = dc->last_ier | MDM_UL; - writew(dc->last_ier, dc->reg_ier); - *toggle = !*toggle; - } - - if (read_iir & MDM_UL1) { - dc->last_ier &= ~MDM_UL; - writew(dc->last_ier, dc->reg_ier); - if (send_data(port, dc)) { - writew(MDM_UL1, dc->reg_fcr); - dc->last_ier = dc->last_ier | MDM_UL; - writew(dc->last_ier, dc->reg_ier); - *toggle = !*toggle; - } - } - } else { - writew(read_iir & MDM_UL, dc->reg_fcr); - dev_err(&dc->pdev->dev, "port out of sync!\n"); - return 0; - } - return 1; -} - -static irqreturn_t interrupt_handler(int irq, void *dev_id) -{ - struct nozomi *dc = dev_id; - unsigned int a; - u16 read_iir; - - if (!dc) - return IRQ_NONE; - - spin_lock(&dc->spin_mutex); - read_iir = readw(dc->reg_iir); - - /* Card removed */ - if (read_iir == (u16)-1) - goto none; - /* - * Just handle interrupt enabled in IER - * (by masking with dc->last_ier) - */ - read_iir &= dc->last_ier; - - if (read_iir == 0) - goto none; - - - DBG4("%s irq:0x%04X, prev:0x%04X", interrupt2str(read_iir), read_iir, - dc->last_ier); - - if (read_iir & RESET) { - if (unlikely(!nozomi_read_config_table(dc))) { - dc->last_ier = 0x0; - writew(dc->last_ier, dc->reg_ier); - dev_err(&dc->pdev->dev, "Could not read status from " - "card, we should disable interface\n"); - } else { - writew(RESET, dc->reg_fcr); - } - /* No more useful info if this was the reset interrupt. */ - goto exit_handler; - } - if (read_iir & CTRL_UL) { - DBG1("CTRL_UL"); - dc->last_ier &= ~CTRL_UL; - writew(dc->last_ier, dc->reg_ier); - if (send_flow_control(dc)) { - writew(CTRL_UL, dc->reg_fcr); - dc->last_ier = dc->last_ier | CTRL_UL; - writew(dc->last_ier, dc->reg_ier); - } - } - if (read_iir & CTRL_DL) { - receive_flow_control(dc); - writew(CTRL_DL, dc->reg_fcr); - } - if (read_iir & MDM_DL) { - if (!handle_data_dl(dc, PORT_MDM, - &(dc->port[PORT_MDM].toggle_dl), read_iir, - MDM_DL1, MDM_DL2)) { - dev_err(&dc->pdev->dev, "MDM_DL out of sync!\n"); - goto exit_handler; - } - } - if (read_iir & MDM_UL) { - if (!handle_data_ul(dc, PORT_MDM, read_iir)) { - dev_err(&dc->pdev->dev, "MDM_UL out of sync!\n"); - goto exit_handler; - } - } - if (read_iir & DIAG_DL) { - if (!handle_data_dl(dc, PORT_DIAG, - &(dc->port[PORT_DIAG].toggle_dl), read_iir, - DIAG_DL1, DIAG_DL2)) { - dev_err(&dc->pdev->dev, "DIAG_DL out of sync!\n"); - goto exit_handler; - } - } - if (read_iir & DIAG_UL) { - dc->last_ier &= ~DIAG_UL; - writew(dc->last_ier, dc->reg_ier); - if (send_data(PORT_DIAG, dc)) { - writew(DIAG_UL, dc->reg_fcr); - dc->last_ier = dc->last_ier | DIAG_UL; - writew(dc->last_ier, dc->reg_ier); - } - } - if (read_iir & APP1_DL) { - if (receive_data(PORT_APP1, dc)) - writew(APP1_DL, dc->reg_fcr); - } - if (read_iir & APP1_UL) { - dc->last_ier &= ~APP1_UL; - writew(dc->last_ier, dc->reg_ier); - if (send_data(PORT_APP1, dc)) { - writew(APP1_UL, dc->reg_fcr); - dc->last_ier = dc->last_ier | APP1_UL; - writew(dc->last_ier, dc->reg_ier); - } - } - if (read_iir & APP2_DL) { - if (receive_data(PORT_APP2, dc)) - writew(APP2_DL, dc->reg_fcr); - } - if (read_iir & APP2_UL) { - dc->last_ier &= ~APP2_UL; - writew(dc->last_ier, dc->reg_ier); - if (send_data(PORT_APP2, dc)) { - writew(APP2_UL, dc->reg_fcr); - dc->last_ier = dc->last_ier | APP2_UL; - writew(dc->last_ier, dc->reg_ier); - } - } - -exit_handler: - spin_unlock(&dc->spin_mutex); - for (a = 0; a < NOZOMI_MAX_PORTS; a++) { - struct tty_struct *tty; - if (test_and_clear_bit(a, &dc->flip)) { - tty = tty_port_tty_get(&dc->port[a].port); - if (tty) - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } - } - return IRQ_HANDLED; -none: - spin_unlock(&dc->spin_mutex); - return IRQ_NONE; -} - -static void nozomi_get_card_type(struct nozomi *dc) -{ - int i; - u32 size = 0; - - for (i = 0; i < 6; i++) - size += pci_resource_len(dc->pdev, i); - - /* Assume card type F32_8 if no match */ - dc->card_type = size == 2048 ? F32_2 : F32_8; - - dev_info(&dc->pdev->dev, "Card type is: %d\n", dc->card_type); -} - -static void nozomi_setup_private_data(struct nozomi *dc) -{ - void __iomem *offset = dc->base_addr + dc->card_type / 2; - unsigned int i; - - dc->reg_fcr = (void __iomem *)(offset + R_FCR); - dc->reg_iir = (void __iomem *)(offset + R_IIR); - dc->reg_ier = (void __iomem *)(offset + R_IER); - dc->last_ier = 0; - dc->flip = 0; - - dc->port[PORT_MDM].token_dl = MDM_DL; - dc->port[PORT_DIAG].token_dl = DIAG_DL; - dc->port[PORT_APP1].token_dl = APP1_DL; - dc->port[PORT_APP2].token_dl = APP2_DL; - - for (i = 0; i < MAX_PORT; i++) - init_waitqueue_head(&dc->port[i].tty_wait); -} - -static ssize_t card_type_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev)); - - return sprintf(buf, "%d\n", dc->card_type); -} -static DEVICE_ATTR(card_type, S_IRUGO, card_type_show, NULL); - -static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev)); - - return sprintf(buf, "%u\n", dc->open_ttys); -} -static DEVICE_ATTR(open_ttys, S_IRUGO, open_ttys_show, NULL); - -static void make_sysfs_files(struct nozomi *dc) -{ - if (device_create_file(&dc->pdev->dev, &dev_attr_card_type)) - dev_err(&dc->pdev->dev, - "Could not create sysfs file for card_type\n"); - if (device_create_file(&dc->pdev->dev, &dev_attr_open_ttys)) - dev_err(&dc->pdev->dev, - "Could not create sysfs file for open_ttys\n"); -} - -static void remove_sysfs_files(struct nozomi *dc) -{ - device_remove_file(&dc->pdev->dev, &dev_attr_card_type); - device_remove_file(&dc->pdev->dev, &dev_attr_open_ttys); -} - -/* Allocate memory for one device */ -static int __devinit nozomi_card_init(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - resource_size_t start; - int ret; - struct nozomi *dc = NULL; - int ndev_idx; - int i; - - dev_dbg(&pdev->dev, "Init, new card found\n"); - - for (ndev_idx = 0; ndev_idx < ARRAY_SIZE(ndevs); ndev_idx++) - if (!ndevs[ndev_idx]) - break; - - if (ndev_idx >= ARRAY_SIZE(ndevs)) { - dev_err(&pdev->dev, "no free tty range for this card left\n"); - ret = -EIO; - goto err; - } - - dc = kzalloc(sizeof(struct nozomi), GFP_KERNEL); - if (unlikely(!dc)) { - dev_err(&pdev->dev, "Could not allocate memory\n"); - ret = -ENOMEM; - goto err_free; - } - - dc->pdev = pdev; - - ret = pci_enable_device(dc->pdev); - if (ret) { - dev_err(&pdev->dev, "Failed to enable PCI Device\n"); - goto err_free; - } - - ret = pci_request_regions(dc->pdev, NOZOMI_NAME); - if (ret) { - dev_err(&pdev->dev, "I/O address 0x%04x already in use\n", - (int) /* nozomi_private.io_addr */ 0); - goto err_disable_device; - } - - start = pci_resource_start(dc->pdev, 0); - if (start == 0) { - dev_err(&pdev->dev, "No I/O address for card detected\n"); - ret = -ENODEV; - goto err_rel_regs; - } - - /* Find out what card type it is */ - nozomi_get_card_type(dc); - - dc->base_addr = ioremap_nocache(start, dc->card_type); - if (!dc->base_addr) { - dev_err(&pdev->dev, "Unable to map card MMIO\n"); - ret = -ENODEV; - goto err_rel_regs; - } - - dc->send_buf = kmalloc(SEND_BUF_MAX, GFP_KERNEL); - if (!dc->send_buf) { - dev_err(&pdev->dev, "Could not allocate send buffer?\n"); - ret = -ENOMEM; - goto err_free_sbuf; - } - - for (i = PORT_MDM; i < MAX_PORT; i++) { - if (kfifo_alloc(&dc->port[i].fifo_ul, - FIFO_BUFFER_SIZE_UL, GFP_ATOMIC)) { - dev_err(&pdev->dev, - "Could not allocate kfifo buffer\n"); - ret = -ENOMEM; - goto err_free_kfifo; - } - } - - spin_lock_init(&dc->spin_mutex); - - nozomi_setup_private_data(dc); - - /* Disable all interrupts */ - dc->last_ier = 0; - writew(dc->last_ier, dc->reg_ier); - - ret = request_irq(pdev->irq, &interrupt_handler, IRQF_SHARED, - NOZOMI_NAME, dc); - if (unlikely(ret)) { - dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq); - goto err_free_kfifo; - } - - DBG1("base_addr: %p", dc->base_addr); - - make_sysfs_files(dc); - - dc->index_start = ndev_idx * MAX_PORT; - ndevs[ndev_idx] = dc; - - pci_set_drvdata(pdev, dc); - - /* Enable RESET interrupt */ - dc->last_ier = RESET; - iowrite16(dc->last_ier, dc->reg_ier); - - dc->state = NOZOMI_STATE_ENABLED; - - for (i = 0; i < MAX_PORT; i++) { - struct device *tty_dev; - struct port *port = &dc->port[i]; - port->dc = dc; - mutex_init(&port->tty_sem); - tty_port_init(&port->port); - port->port.ops = &noz_tty_port_ops; - tty_dev = tty_register_device(ntty_driver, dc->index_start + i, - &pdev->dev); - - if (IS_ERR(tty_dev)) { - ret = PTR_ERR(tty_dev); - dev_err(&pdev->dev, "Could not allocate tty?\n"); - goto err_free_tty; - } - } - - return 0; - -err_free_tty: - for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) - tty_unregister_device(ntty_driver, i); -err_free_kfifo: - for (i = 0; i < MAX_PORT; i++) - kfifo_free(&dc->port[i].fifo_ul); -err_free_sbuf: - kfree(dc->send_buf); - iounmap(dc->base_addr); -err_rel_regs: - pci_release_regions(pdev); -err_disable_device: - pci_disable_device(pdev); -err_free: - kfree(dc); -err: - return ret; -} - -static void __devexit tty_exit(struct nozomi *dc) -{ - unsigned int i; - - DBG1(" "); - - flush_scheduled_work(); - - for (i = 0; i < MAX_PORT; ++i) { - struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port); - if (tty && list_empty(&tty->hangup_work.entry)) - tty_hangup(tty); - tty_kref_put(tty); - } - /* Racy below - surely should wait for scheduled work to be done or - complete off a hangup method ? */ - while (dc->open_ttys) - msleep(1); - for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) - tty_unregister_device(ntty_driver, i); -} - -/* Deallocate memory for one device */ -static void __devexit nozomi_card_exit(struct pci_dev *pdev) -{ - int i; - struct ctrl_ul ctrl; - struct nozomi *dc = pci_get_drvdata(pdev); - - /* Disable all interrupts */ - dc->last_ier = 0; - writew(dc->last_ier, dc->reg_ier); - - tty_exit(dc); - - /* Send 0x0001, command card to resend the reset token. */ - /* This is to get the reset when the module is reloaded. */ - ctrl.port = 0x00; - ctrl.reserved = 0; - ctrl.RTS = 0; - ctrl.DTR = 1; - DBG1("sending flow control 0x%04X", *((u16 *)&ctrl)); - - /* Setup dc->reg addresses to we can use defines here */ - write_mem32(dc->port[PORT_CTRL].ul_addr[0], (u32 *)&ctrl, 2); - writew(CTRL_UL, dc->reg_fcr); /* push the token to the card. */ - - remove_sysfs_files(dc); - - free_irq(pdev->irq, dc); - - for (i = 0; i < MAX_PORT; i++) - kfifo_free(&dc->port[i].fifo_ul); - - kfree(dc->send_buf); - - iounmap(dc->base_addr); - - pci_release_regions(pdev); - - pci_disable_device(pdev); - - ndevs[dc->index_start / MAX_PORT] = NULL; - - kfree(dc); -} - -static void set_rts(const struct tty_struct *tty, int rts) -{ - struct port *port = get_port_by_tty(tty); - - port->ctrl_ul.RTS = rts; - port->update_flow_control = 1; - enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty)); -} - -static void set_dtr(const struct tty_struct *tty, int dtr) -{ - struct port *port = get_port_by_tty(tty); - - DBG1("SETTING DTR index: %d, dtr: %d", tty->index, dtr); - - port->ctrl_ul.DTR = dtr; - port->update_flow_control = 1; - enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty)); -} - -/* - * ---------------------------------------------------------------------------- - * TTY code - * ---------------------------------------------------------------------------- - */ - -static int ntty_install(struct tty_driver *driver, struct tty_struct *tty) -{ - struct port *port = get_port_by_tty(tty); - struct nozomi *dc = get_dc_by_tty(tty); - int ret; - if (!port || !dc || dc->state != NOZOMI_STATE_READY) - return -ENODEV; - ret = tty_init_termios(tty); - if (ret == 0) { - tty_driver_kref_get(driver); - tty->count++; - tty->driver_data = port; - driver->ttys[tty->index] = tty; - } - return ret; -} - -static void ntty_cleanup(struct tty_struct *tty) -{ - tty->driver_data = NULL; -} - -static int ntty_activate(struct tty_port *tport, struct tty_struct *tty) -{ - struct port *port = container_of(tport, struct port, port); - struct nozomi *dc = port->dc; - unsigned long flags; - - DBG1("open: %d", port->token_dl); - spin_lock_irqsave(&dc->spin_mutex, flags); - dc->last_ier = dc->last_ier | port->token_dl; - writew(dc->last_ier, dc->reg_ier); - dc->open_ttys++; - spin_unlock_irqrestore(&dc->spin_mutex, flags); - printk("noz: activated %d: %p\n", tty->index, tport); - return 0; -} - -static int ntty_open(struct tty_struct *tty, struct file *filp) -{ - struct port *port = tty->driver_data; - return tty_port_open(&port->port, tty, filp); -} - -static void ntty_shutdown(struct tty_port *tport) -{ - struct port *port = container_of(tport, struct port, port); - struct nozomi *dc = port->dc; - unsigned long flags; - - DBG1("close: %d", port->token_dl); - spin_lock_irqsave(&dc->spin_mutex, flags); - dc->last_ier &= ~(port->token_dl); - writew(dc->last_ier, dc->reg_ier); - dc->open_ttys--; - spin_unlock_irqrestore(&dc->spin_mutex, flags); - printk("noz: shutdown %p\n", tport); -} - -static void ntty_close(struct tty_struct *tty, struct file *filp) -{ - struct port *port = tty->driver_data; - if (port) - tty_port_close(&port->port, tty, filp); -} - -static void ntty_hangup(struct tty_struct *tty) -{ - struct port *port = tty->driver_data; - tty_port_hangup(&port->port); -} - -/* - * called when the userspace process writes to the tty (/dev/noz*). - * Data is inserted into a fifo, which is then read and transfered to the modem. - */ -static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, - int count) -{ - int rval = -EINVAL; - struct nozomi *dc = get_dc_by_tty(tty); - struct port *port = tty->driver_data; - unsigned long flags; - - /* DBG1( "WRITEx: %d, index = %d", count, index); */ - - if (!dc || !port) - return -ENODEV; - - mutex_lock(&port->tty_sem); - - if (unlikely(!port->port.count)) { - DBG1(" "); - goto exit; - } - - rval = kfifo_in(&port->fifo_ul, (unsigned char *)buffer, count); - - /* notify card */ - if (unlikely(dc == NULL)) { - DBG1("No device context?"); - goto exit; - } - - spin_lock_irqsave(&dc->spin_mutex, flags); - /* CTS is only valid on the modem channel */ - if (port == &(dc->port[PORT_MDM])) { - if (port->ctrl_dl.CTS) { - DBG4("Enable interrupt"); - enable_transmit_ul(tty->index % MAX_PORT, dc); - } else { - dev_err(&dc->pdev->dev, - "CTS not active on modem port?\n"); - } - } else { - enable_transmit_ul(tty->index % MAX_PORT, dc); - } - spin_unlock_irqrestore(&dc->spin_mutex, flags); - -exit: - mutex_unlock(&port->tty_sem); - return rval; -} - -/* - * Calculate how much is left in device - * This method is called by the upper tty layer. - * #according to sources N_TTY.c it expects a value >= 0 and - * does not check for negative values. - * - * If the port is unplugged report lots of room and let the bits - * dribble away so we don't block anything. - */ -static int ntty_write_room(struct tty_struct *tty) -{ - struct port *port = tty->driver_data; - int room = 4096; - const struct nozomi *dc = get_dc_by_tty(tty); - - if (dc) { - mutex_lock(&port->tty_sem); - if (port->port.count) - room = kfifo_avail(&port->fifo_ul); - mutex_unlock(&port->tty_sem); - } - return room; -} - -/* Gets io control parameters */ -static int ntty_tiocmget(struct tty_struct *tty) -{ - const struct port *port = tty->driver_data; - const struct ctrl_dl *ctrl_dl = &port->ctrl_dl; - const struct ctrl_ul *ctrl_ul = &port->ctrl_ul; - - /* Note: these could change under us but it is not clear this - matters if so */ - return (ctrl_ul->RTS ? TIOCM_RTS : 0) | - (ctrl_ul->DTR ? TIOCM_DTR : 0) | - (ctrl_dl->DCD ? TIOCM_CAR : 0) | - (ctrl_dl->RI ? TIOCM_RNG : 0) | - (ctrl_dl->DSR ? TIOCM_DSR : 0) | - (ctrl_dl->CTS ? TIOCM_CTS : 0); -} - -/* Sets io controls parameters */ -static int ntty_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct nozomi *dc = get_dc_by_tty(tty); - unsigned long flags; - - spin_lock_irqsave(&dc->spin_mutex, flags); - if (set & TIOCM_RTS) - set_rts(tty, 1); - else if (clear & TIOCM_RTS) - set_rts(tty, 0); - - if (set & TIOCM_DTR) - set_dtr(tty, 1); - else if (clear & TIOCM_DTR) - set_dtr(tty, 0); - spin_unlock_irqrestore(&dc->spin_mutex, flags); - - return 0; -} - -static int ntty_cflags_changed(struct port *port, unsigned long flags, - struct async_icount *cprev) -{ - const struct async_icount cnow = port->tty_icount; - int ret; - - ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) || - ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || - ((flags & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || - ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts)); - - *cprev = cnow; - - return ret; -} - -static int ntty_tiocgicount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct port *port = tty->driver_data; - const struct async_icount cnow = port->tty_icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - return 0; -} - -static int ntty_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct port *port = tty->driver_data; - int rval = -ENOIOCTLCMD; - - DBG1("******** IOCTL, cmd: %d", cmd); - - switch (cmd) { - case TIOCMIWAIT: { - struct async_icount cprev = port->tty_icount; - - rval = wait_event_interruptible(port->tty_wait, - ntty_cflags_changed(port, arg, &cprev)); - break; - } - default: - DBG1("ERR: 0x%08X, %d", cmd, cmd); - break; - }; - - return rval; -} - -/* - * Called by the upper tty layer when tty buffers are ready - * to receive data again after a call to throttle. - */ -static void ntty_unthrottle(struct tty_struct *tty) -{ - struct nozomi *dc = get_dc_by_tty(tty); - unsigned long flags; - - DBG1("UNTHROTTLE"); - spin_lock_irqsave(&dc->spin_mutex, flags); - enable_transmit_dl(tty->index % MAX_PORT, dc); - set_rts(tty, 1); - - spin_unlock_irqrestore(&dc->spin_mutex, flags); -} - -/* - * Called by the upper tty layer when the tty buffers are almost full. - * The driver should stop send more data. - */ -static void ntty_throttle(struct tty_struct *tty) -{ - struct nozomi *dc = get_dc_by_tty(tty); - unsigned long flags; - - DBG1("THROTTLE"); - spin_lock_irqsave(&dc->spin_mutex, flags); - set_rts(tty, 0); - spin_unlock_irqrestore(&dc->spin_mutex, flags); -} - -/* Returns number of chars in buffer, called by tty layer */ -static s32 ntty_chars_in_buffer(struct tty_struct *tty) -{ - struct port *port = tty->driver_data; - struct nozomi *dc = get_dc_by_tty(tty); - s32 rval = 0; - - if (unlikely(!dc || !port)) { - goto exit_in_buffer; - } - - if (unlikely(!port->port.count)) { - dev_err(&dc->pdev->dev, "No tty open?\n"); - goto exit_in_buffer; - } - - rval = kfifo_len(&port->fifo_ul); - -exit_in_buffer: - return rval; -} - -static const struct tty_port_operations noz_tty_port_ops = { - .activate = ntty_activate, - .shutdown = ntty_shutdown, -}; - -static const struct tty_operations tty_ops = { - .ioctl = ntty_ioctl, - .open = ntty_open, - .close = ntty_close, - .hangup = ntty_hangup, - .write = ntty_write, - .write_room = ntty_write_room, - .unthrottle = ntty_unthrottle, - .throttle = ntty_throttle, - .chars_in_buffer = ntty_chars_in_buffer, - .tiocmget = ntty_tiocmget, - .tiocmset = ntty_tiocmset, - .get_icount = ntty_tiocgicount, - .install = ntty_install, - .cleanup = ntty_cleanup, -}; - -/* Module initialization */ -static struct pci_driver nozomi_driver = { - .name = NOZOMI_NAME, - .id_table = nozomi_pci_tbl, - .probe = nozomi_card_init, - .remove = __devexit_p(nozomi_card_exit), -}; - -static __init int nozomi_init(void) -{ - int ret; - - printk(KERN_INFO "Initializing %s\n", VERSION_STRING); - - ntty_driver = alloc_tty_driver(NTTY_TTY_MAXMINORS); - if (!ntty_driver) - return -ENOMEM; - - ntty_driver->owner = THIS_MODULE; - ntty_driver->driver_name = NOZOMI_NAME_TTY; - ntty_driver->name = "noz"; - ntty_driver->major = 0; - ntty_driver->type = TTY_DRIVER_TYPE_SERIAL; - ntty_driver->subtype = SERIAL_TYPE_NORMAL; - ntty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - ntty_driver->init_termios = tty_std_termios; - ntty_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | \ - HUPCL | CLOCAL; - ntty_driver->init_termios.c_ispeed = 115200; - ntty_driver->init_termios.c_ospeed = 115200; - tty_set_operations(ntty_driver, &tty_ops); - - ret = tty_register_driver(ntty_driver); - if (ret) { - printk(KERN_ERR "Nozomi: failed to register ntty driver\n"); - goto free_tty; - } - - ret = pci_register_driver(&nozomi_driver); - if (ret) { - printk(KERN_ERR "Nozomi: can't register pci driver\n"); - goto unr_tty; - } - - return 0; -unr_tty: - tty_unregister_driver(ntty_driver); -free_tty: - put_tty_driver(ntty_driver); - return ret; -} - -static __exit void nozomi_exit(void) -{ - printk(KERN_INFO "Unloading %s\n", DRIVER_DESC); - pci_unregister_driver(&nozomi_driver); - tty_unregister_driver(ntty_driver); - put_tty_driver(ntty_driver); -} - -module_init(nozomi_init); -module_exit(nozomi_exit); - -module_param(debug, int, S_IRUGO | S_IWUSR); - -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c deleted file mode 100644 index 3780da8ad12d..000000000000 --- a/drivers/char/rocket.c +++ /dev/null @@ -1,3199 +0,0 @@ -/* - * RocketPort device driver for Linux - * - * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000. - * - * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * Kernel Synchronization: - * - * This driver has 2 kernel control paths - exception handlers (calls into the driver - * from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts - * are not used. - * - * Critical data: - * - rp_table[], accessed through passed "info" pointers, is a global (static) array of - * serial port state information and the xmit_buf circular buffer. Protected by - * a per port spinlock. - * - xmit_flags[], an array of ints indexed by line (port) number, indicating that there - * is data to be transmitted. Protected by atomic bit operations. - * - rp_num_ports, int indicating number of open ports, protected by atomic operations. - * - * rp_write() and rp_write_char() functions use a per port semaphore to protect against - * simultaneous access to the same port by more than one process. - */ - -/****** Defines ******/ -#define ROCKET_PARANOIA_CHECK -#define ROCKET_DISABLE_SIMUSAGE - -#undef ROCKET_SOFT_FLOW -#undef ROCKET_DEBUG_OPEN -#undef ROCKET_DEBUG_INTR -#undef ROCKET_DEBUG_WRITE -#undef ROCKET_DEBUG_FLOW -#undef ROCKET_DEBUG_THROTTLE -#undef ROCKET_DEBUG_WAIT_UNTIL_SENT -#undef ROCKET_DEBUG_RECEIVE -#undef ROCKET_DEBUG_HANGUP -#undef REV_PCI_ORDER -#undef ROCKET_DEBUG_IO - -#define POLL_PERIOD HZ/100 /* Polling period .01 seconds (10ms) */ - -/****** Kernel includes ******/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/****** RocketPort includes ******/ - -#include "rocket_int.h" -#include "rocket.h" - -#define ROCKET_VERSION "2.09" -#define ROCKET_DATE "12-June-2003" - -/****** RocketPort Local Variables ******/ - -static void rp_do_poll(unsigned long dummy); - -static struct tty_driver *rocket_driver; - -static struct rocket_version driver_version = { - ROCKET_VERSION, ROCKET_DATE -}; - -static struct r_port *rp_table[MAX_RP_PORTS]; /* The main repository of serial port state information. */ -static unsigned int xmit_flags[NUM_BOARDS]; /* Bit significant, indicates port had data to transmit. */ - /* eg. Bit 0 indicates port 0 has xmit data, ... */ -static atomic_t rp_num_ports_open; /* Number of serial ports open */ -static DEFINE_TIMER(rocket_timer, rp_do_poll, 0, 0); - -static unsigned long board1; /* ISA addresses, retrieved from rocketport.conf */ -static unsigned long board2; -static unsigned long board3; -static unsigned long board4; -static unsigned long controller; -static int support_low_speed; -static unsigned long modem1; -static unsigned long modem2; -static unsigned long modem3; -static unsigned long modem4; -static unsigned long pc104_1[8]; -static unsigned long pc104_2[8]; -static unsigned long pc104_3[8]; -static unsigned long pc104_4[8]; -static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 }; - -static int rp_baud_base[NUM_BOARDS]; /* Board config info (Someday make a per-board structure) */ -static unsigned long rcktpt_io_addr[NUM_BOARDS]; -static int rcktpt_type[NUM_BOARDS]; -static int is_PCI[NUM_BOARDS]; -static rocketModel_t rocketModel[NUM_BOARDS]; -static int max_board; -static const struct tty_port_operations rocket_port_ops; - -/* - * The following arrays define the interrupt bits corresponding to each AIOP. - * These bits are different between the ISA and regular PCI boards and the - * Universal PCI boards. - */ - -static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = { - AIOP_INTR_BIT_0, - AIOP_INTR_BIT_1, - AIOP_INTR_BIT_2, - AIOP_INTR_BIT_3 -}; - -static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = { - UPCI_AIOP_INTR_BIT_0, - UPCI_AIOP_INTR_BIT_1, - UPCI_AIOP_INTR_BIT_2, - UPCI_AIOP_INTR_BIT_3 -}; - -static Byte_t RData[RDATASIZE] = { - 0x00, 0x09, 0xf6, 0x82, - 0x02, 0x09, 0x86, 0xfb, - 0x04, 0x09, 0x00, 0x0a, - 0x06, 0x09, 0x01, 0x0a, - 0x08, 0x09, 0x8a, 0x13, - 0x0a, 0x09, 0xc5, 0x11, - 0x0c, 0x09, 0x86, 0x85, - 0x0e, 0x09, 0x20, 0x0a, - 0x10, 0x09, 0x21, 0x0a, - 0x12, 0x09, 0x41, 0xff, - 0x14, 0x09, 0x82, 0x00, - 0x16, 0x09, 0x82, 0x7b, - 0x18, 0x09, 0x8a, 0x7d, - 0x1a, 0x09, 0x88, 0x81, - 0x1c, 0x09, 0x86, 0x7a, - 0x1e, 0x09, 0x84, 0x81, - 0x20, 0x09, 0x82, 0x7c, - 0x22, 0x09, 0x0a, 0x0a -}; - -static Byte_t RRegData[RREGDATASIZE] = { - 0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */ - 0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */ - 0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */ - 0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */ - 0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */ - 0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */ - 0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */ - 0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */ - 0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */ - 0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */ - 0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */ - 0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */ - 0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */ -}; - -static CONTROLLER_T sController[CTL_SIZE] = { - {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, - {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, - {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, - {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, - {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, - {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, - {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, - {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}} -}; - -static Byte_t sBitMapClrTbl[8] = { - 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f -}; - -static Byte_t sBitMapSetTbl[8] = { - 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 -}; - -static int sClockPrescale = 0x14; - -/* - * Line number is the ttySIx number (x), the Minor number. We - * assign them sequentially, starting at zero. The following - * array keeps track of the line number assigned to a given board/aiop/channel. - */ -static unsigned char lineNumbers[MAX_RP_PORTS]; -static unsigned long nextLineNumber; - -/***** RocketPort Static Prototypes *********/ -static int __init init_ISA(int i); -static void rp_wait_until_sent(struct tty_struct *tty, int timeout); -static void rp_flush_buffer(struct tty_struct *tty); -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model); -static unsigned char GetLineNumber(int ctrl, int aiop, int ch); -static unsigned char SetLineNumber(int ctrl, int aiop, int ch); -static void rp_start(struct tty_struct *tty); -static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum, - int ChanNum); -static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode); -static void sFlushRxFIFO(CHANNEL_T * ChP); -static void sFlushTxFIFO(CHANNEL_T * ChP); -static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags); -static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); -static void sModemReset(CONTROLLER_T * CtlP, int chan, int on); -static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); -static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd); -static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, - ByteIO_t * AiopIOList, int AiopIOListSize, - int IRQNum, Byte_t Frequency, int PeriodicOnly); -static int sReadAiopID(ByteIO_t io); -static int sReadAiopNumChan(WordIO_t io); - -MODULE_AUTHOR("Theodore Ts'o"); -MODULE_DESCRIPTION("Comtrol RocketPort driver"); -module_param(board1, ulong, 0); -MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1"); -module_param(board2, ulong, 0); -MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2"); -module_param(board3, ulong, 0); -MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3"); -module_param(board4, ulong, 0); -MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4"); -module_param(controller, ulong, 0); -MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller"); -module_param(support_low_speed, bool, 0); -MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud"); -module_param(modem1, ulong, 0); -MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem"); -module_param(modem2, ulong, 0); -MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem"); -module_param(modem3, ulong, 0); -MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem"); -module_param(modem4, ulong, 0); -MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem"); -module_param_array(pc104_1, ulong, NULL, 0); -MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,..."); -module_param_array(pc104_2, ulong, NULL, 0); -MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,..."); -module_param_array(pc104_3, ulong, NULL, 0); -MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,..."); -module_param_array(pc104_4, ulong, NULL, 0); -MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,..."); - -static int rp_init(void); -static void rp_cleanup_module(void); - -module_init(rp_init); -module_exit(rp_cleanup_module); - - -MODULE_LICENSE("Dual BSD/GPL"); - -/*************************************************************************/ -/* Module code starts here */ - -static inline int rocket_paranoia_check(struct r_port *info, - const char *routine) -{ -#ifdef ROCKET_PARANOIA_CHECK - if (!info) - return 1; - if (info->magic != RPORT_MAGIC) { - printk(KERN_WARNING "Warning: bad magic number for rocketport " - "struct in %s\n", routine); - return 1; - } -#endif - return 0; -} - - -/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals - * that receive data is present on a serial port. Pulls data from FIFO, moves it into the - * tty layer. - */ -static void rp_do_receive(struct r_port *info, - struct tty_struct *tty, - CHANNEL_t * cp, unsigned int ChanStatus) -{ - unsigned int CharNStat; - int ToRecv, wRecv, space; - unsigned char *cbuf; - - ToRecv = sGetRxCnt(cp); -#ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv); -#endif - if (ToRecv == 0) - return; - - /* - * if status indicates there are errored characters in the - * FIFO, then enter status mode (a word in FIFO holds - * character and status). - */ - if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) { - if (!(ChanStatus & STATMODE)) { -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "Entering STATMODE...\n"); -#endif - ChanStatus |= STATMODE; - sEnRxStatusMode(cp); - } - } - - /* - * if we previously entered status mode, then read down the - * FIFO one word at a time, pulling apart the character and - * the status. Update error counters depending on status - */ - if (ChanStatus & STATMODE) { -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "Ignore %x, read %x...\n", - info->ignore_status_mask, info->read_status_mask); -#endif - while (ToRecv) { - char flag; - - CharNStat = sInW(sGetTxRxDataIO(cp)); -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "%x...\n", CharNStat); -#endif - if (CharNStat & STMBREAKH) - CharNStat &= ~(STMFRAMEH | STMPARITYH); - if (CharNStat & info->ignore_status_mask) { - ToRecv--; - continue; - } - CharNStat &= info->read_status_mask; - if (CharNStat & STMBREAKH) - flag = TTY_BREAK; - else if (CharNStat & STMPARITYH) - flag = TTY_PARITY; - else if (CharNStat & STMFRAMEH) - flag = TTY_FRAME; - else if (CharNStat & STMRCVROVRH) - flag = TTY_OVERRUN; - else - flag = TTY_NORMAL; - tty_insert_flip_char(tty, CharNStat & 0xff, flag); - ToRecv--; - } - - /* - * after we've emptied the FIFO in status mode, turn - * status mode back off - */ - if (sGetRxCnt(cp) == 0) { -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "Status mode off.\n"); -#endif - sDisRxStatusMode(cp); - } - } else { - /* - * we aren't in status mode, so read down the FIFO two - * characters at time by doing repeated word IO - * transfer. - */ - space = tty_prepare_flip_string(tty, &cbuf, ToRecv); - if (space < ToRecv) { -#ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space); -#endif - if (space <= 0) - return; - ToRecv = space; - } - wRecv = ToRecv >> 1; - if (wRecv) - sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv); - if (ToRecv & 1) - cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp)); - } - /* Push the data up to the tty layer */ - tty_flip_buffer_push(tty); -} - -/* - * Serial port transmit data function. Called from the timer polling loop as a - * result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready - * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is - * moved to the port's xmit FIFO. *info is critical data, protected by spinlocks. - */ -static void rp_do_transmit(struct r_port *info) -{ - int c; - CHANNEL_t *cp = &info->channel; - struct tty_struct *tty; - unsigned long flags; - -#ifdef ROCKET_DEBUG_INTR - printk(KERN_DEBUG "%s\n", __func__); -#endif - if (!info) - return; - tty = tty_port_tty_get(&info->port); - - if (tty == NULL) { - printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__); - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - return; - } - - spin_lock_irqsave(&info->slock, flags); - info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); - - /* Loop sending data to FIFO until done or FIFO full */ - while (1) { - if (tty->stopped || tty->hw_stopped) - break; - c = min(info->xmit_fifo_room, info->xmit_cnt); - c = min(c, XMIT_BUF_SIZE - info->xmit_tail); - if (c <= 0 || info->xmit_fifo_room <= 0) - break; - sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2); - if (c & 1) - sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]); - info->xmit_tail += c; - info->xmit_tail &= XMIT_BUF_SIZE - 1; - info->xmit_cnt -= c; - info->xmit_fifo_room -= c; -#ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "tx %d chars...\n", c); -#endif - } - - if (info->xmit_cnt == 0) - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - - if (info->xmit_cnt < WAKEUP_CHARS) { - tty_wakeup(tty); -#ifdef ROCKETPORT_HAVE_POLL_WAIT - wake_up_interruptible(&tty->poll_wait); -#endif - } - - spin_unlock_irqrestore(&info->slock, flags); - tty_kref_put(tty); - -#ifdef ROCKET_DEBUG_INTR - printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, - info->xmit_tail, info->xmit_fifo_room); -#endif -} - -/* - * Called when a serial port signals it has read data in it's RX FIFO. - * It checks what interrupts are pending and services them, including - * receiving serial data. - */ -static void rp_handle_port(struct r_port *info) -{ - CHANNEL_t *cp; - struct tty_struct *tty; - unsigned int IntMask, ChanStatus; - - if (!info) - return; - - if ((info->port.flags & ASYNC_INITIALIZED) == 0) { - printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " - "info->flags & NOT_INIT\n"); - return; - } - tty = tty_port_tty_get(&info->port); - if (!tty) { - printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " - "tty==NULL\n"); - return; - } - cp = &info->channel; - - IntMask = sGetChanIntID(cp) & info->intmask; -#ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "rp_interrupt %02x...\n", IntMask); -#endif - ChanStatus = sGetChanStatus(cp); - if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */ - rp_do_receive(info, tty, cp, ChanStatus); - } - if (IntMask & DELTA_CD) { /* CD change */ -#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP)) - printk(KERN_INFO "ttyR%d CD now %s...\n", info->line, - (ChanStatus & CD_ACT) ? "on" : "off"); -#endif - if (!(ChanStatus & CD_ACT) && info->cd_status) { -#ifdef ROCKET_DEBUG_HANGUP - printk(KERN_INFO "CD drop, calling hangup.\n"); -#endif - tty_hangup(tty); - } - info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0; - wake_up_interruptible(&info->port.open_wait); - } -#ifdef ROCKET_DEBUG_INTR - if (IntMask & DELTA_CTS) { /* CTS change */ - printk(KERN_INFO "CTS change...\n"); - } - if (IntMask & DELTA_DSR) { /* DSR change */ - printk(KERN_INFO "DSR change...\n"); - } -#endif - tty_kref_put(tty); -} - -/* - * The top level polling routine. Repeats every 1/100 HZ (10ms). - */ -static void rp_do_poll(unsigned long dummy) -{ - CONTROLLER_t *ctlp; - int ctrl, aiop, ch, line; - unsigned int xmitmask, i; - unsigned int CtlMask; - unsigned char AiopMask; - Word_t bit; - - /* Walk through all the boards (ctrl's) */ - for (ctrl = 0; ctrl < max_board; ctrl++) { - if (rcktpt_io_addr[ctrl] <= 0) - continue; - - /* Get a ptr to the board's control struct */ - ctlp = sCtlNumToCtlPtr(ctrl); - - /* Get the interrupt status from the board */ -#ifdef CONFIG_PCI - if (ctlp->BusType == isPCI) - CtlMask = sPCIGetControllerIntStatus(ctlp); - else -#endif - CtlMask = sGetControllerIntStatus(ctlp); - - /* Check if any AIOP read bits are set */ - for (aiop = 0; CtlMask; aiop++) { - bit = ctlp->AiopIntrBits[aiop]; - if (CtlMask & bit) { - CtlMask &= ~bit; - AiopMask = sGetAiopIntStatus(ctlp, aiop); - - /* Check if any port read bits are set */ - for (ch = 0; AiopMask; AiopMask >>= 1, ch++) { - if (AiopMask & 1) { - - /* Get the line number (/dev/ttyRx number). */ - /* Read the data from the port. */ - line = GetLineNumber(ctrl, aiop, ch); - rp_handle_port(rp_table[line]); - } - } - } - } - - xmitmask = xmit_flags[ctrl]; - - /* - * xmit_flags contains bit-significant flags, indicating there is data - * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port - * 1, ... (32 total possible). The variable i has the aiop and ch - * numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc). - */ - if (xmitmask) { - for (i = 0; i < rocketModel[ctrl].numPorts; i++) { - if (xmitmask & (1 << i)) { - aiop = (i & 0x18) >> 3; - ch = i & 0x07; - line = GetLineNumber(ctrl, aiop, ch); - rp_do_transmit(rp_table[line]); - } - } - } - } - - /* - * Reset the timer so we get called at the next clock tick (10ms). - */ - if (atomic_read(&rp_num_ports_open)) - mod_timer(&rocket_timer, jiffies + POLL_PERIOD); -} - -/* - * Initializes the r_port structure for a port, as well as enabling the port on - * the board. - * Inputs: board, aiop, chan numbers - */ -static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) -{ - unsigned rocketMode; - struct r_port *info; - int line; - CONTROLLER_T *ctlp; - - /* Get the next available line number */ - line = SetLineNumber(board, aiop, chan); - - ctlp = sCtlNumToCtlPtr(board); - - /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */ - info = kzalloc(sizeof (struct r_port), GFP_KERNEL); - if (!info) { - printk(KERN_ERR "Couldn't allocate info struct for line #%d\n", - line); - return; - } - - info->magic = RPORT_MAGIC; - info->line = line; - info->ctlp = ctlp; - info->board = board; - info->aiop = aiop; - info->chan = chan; - tty_port_init(&info->port); - info->port.ops = &rocket_port_ops; - init_completion(&info->close_wait); - info->flags &= ~ROCKET_MODE_MASK; - switch (pc104[board][line]) { - case 422: - info->flags |= ROCKET_MODE_RS422; - break; - case 485: - info->flags |= ROCKET_MODE_RS485; - break; - case 232: - default: - info->flags |= ROCKET_MODE_RS232; - break; - } - - info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR; - if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) { - printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n", - board, aiop, chan); - kfree(info); - return; - } - - rocketMode = info->flags & ROCKET_MODE_MASK; - - if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485)) - sEnRTSToggle(&info->channel); - else - sDisRTSToggle(&info->channel); - - if (ctlp->boardType == ROCKET_TYPE_PC104) { - switch (rocketMode) { - case ROCKET_MODE_RS485: - sSetInterfaceMode(&info->channel, InterfaceModeRS485); - break; - case ROCKET_MODE_RS422: - sSetInterfaceMode(&info->channel, InterfaceModeRS422); - break; - case ROCKET_MODE_RS232: - default: - if (info->flags & ROCKET_RTS_TOGGLE) - sSetInterfaceMode(&info->channel, InterfaceModeRS232T); - else - sSetInterfaceMode(&info->channel, InterfaceModeRS232); - break; - } - } - spin_lock_init(&info->slock); - mutex_init(&info->write_mtx); - rp_table[line] = info; - tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev : - NULL); -} - -/* - * Configures a rocketport port according to its termio settings. Called from - * user mode into the driver (exception handler). *info CD manipulation is spinlock protected. - */ -static void configure_r_port(struct tty_struct *tty, struct r_port *info, - struct ktermios *old_termios) -{ - unsigned cflag; - unsigned long flags; - unsigned rocketMode; - int bits, baud, divisor; - CHANNEL_t *cp; - struct ktermios *t = tty->termios; - - cp = &info->channel; - cflag = t->c_cflag; - - /* Byte size and parity */ - if ((cflag & CSIZE) == CS8) { - sSetData8(cp); - bits = 10; - } else { - sSetData7(cp); - bits = 9; - } - if (cflag & CSTOPB) { - sSetStop2(cp); - bits++; - } else { - sSetStop1(cp); - } - - if (cflag & PARENB) { - sEnParity(cp); - bits++; - if (cflag & PARODD) { - sSetOddParity(cp); - } else { - sSetEvenParity(cp); - } - } else { - sDisParity(cp); - } - - /* baud rate */ - baud = tty_get_baud_rate(tty); - if (!baud) - baud = 9600; - divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1; - if ((divisor >= 8192 || divisor < 0) && old_termios) { - baud = tty_termios_baud_rate(old_termios); - if (!baud) - baud = 9600; - divisor = (rp_baud_base[info->board] / baud) - 1; - } - if (divisor >= 8192 || divisor < 0) { - baud = 9600; - divisor = (rp_baud_base[info->board] / baud) - 1; - } - info->cps = baud / bits; - sSetBaud(cp, divisor); - - /* FIXME: Should really back compute a baud rate from the divisor */ - tty_encode_baud_rate(tty, baud, baud); - - if (cflag & CRTSCTS) { - info->intmask |= DELTA_CTS; - sEnCTSFlowCtl(cp); - } else { - info->intmask &= ~DELTA_CTS; - sDisCTSFlowCtl(cp); - } - if (cflag & CLOCAL) { - info->intmask &= ~DELTA_CD; - } else { - spin_lock_irqsave(&info->slock, flags); - if (sGetChanStatus(cp) & CD_ACT) - info->cd_status = 1; - else - info->cd_status = 0; - info->intmask |= DELTA_CD; - spin_unlock_irqrestore(&info->slock, flags); - } - - /* - * Handle software flow control in the board - */ -#ifdef ROCKET_SOFT_FLOW - if (I_IXON(tty)) { - sEnTxSoftFlowCtl(cp); - if (I_IXANY(tty)) { - sEnIXANY(cp); - } else { - sDisIXANY(cp); - } - sSetTxXONChar(cp, START_CHAR(tty)); - sSetTxXOFFChar(cp, STOP_CHAR(tty)); - } else { - sDisTxSoftFlowCtl(cp); - sDisIXANY(cp); - sClrTxXOFF(cp); - } -#endif - - /* - * Set up ignore/read mask words - */ - info->read_status_mask = STMRCVROVRH | 0xFF; - if (I_INPCK(tty)) - info->read_status_mask |= STMFRAMEH | STMPARITYH; - if (I_BRKINT(tty) || I_PARMRK(tty)) - info->read_status_mask |= STMBREAKH; - - /* - * Characters to ignore - */ - info->ignore_status_mask = 0; - if (I_IGNPAR(tty)) - info->ignore_status_mask |= STMFRAMEH | STMPARITYH; - if (I_IGNBRK(tty)) { - info->ignore_status_mask |= STMBREAKH; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too. (For real raw support). - */ - if (I_IGNPAR(tty)) - info->ignore_status_mask |= STMRCVROVRH; - } - - rocketMode = info->flags & ROCKET_MODE_MASK; - - if ((info->flags & ROCKET_RTS_TOGGLE) - || (rocketMode == ROCKET_MODE_RS485)) - sEnRTSToggle(cp); - else - sDisRTSToggle(cp); - - sSetRTS(&info->channel); - - if (cp->CtlP->boardType == ROCKET_TYPE_PC104) { - switch (rocketMode) { - case ROCKET_MODE_RS485: - sSetInterfaceMode(cp, InterfaceModeRS485); - break; - case ROCKET_MODE_RS422: - sSetInterfaceMode(cp, InterfaceModeRS422); - break; - case ROCKET_MODE_RS232: - default: - if (info->flags & ROCKET_RTS_TOGGLE) - sSetInterfaceMode(cp, InterfaceModeRS232T); - else - sSetInterfaceMode(cp, InterfaceModeRS232); - break; - } - } -} - -static int carrier_raised(struct tty_port *port) -{ - struct r_port *info = container_of(port, struct r_port, port); - return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - struct r_port *info = container_of(port, struct r_port, port); - if (on) { - sSetDTR(&info->channel); - sSetRTS(&info->channel); - } else { - sClrDTR(&info->channel); - sClrRTS(&info->channel); - } -} - -/* - * Exception handler that opens a serial port. Creates xmit_buf storage, fills in - * port's r_port struct. Initializes the port hardware. - */ -static int rp_open(struct tty_struct *tty, struct file *filp) -{ - struct r_port *info; - struct tty_port *port; - int line = 0, retval; - CHANNEL_t *cp; - unsigned long page; - - line = tty->index; - if (line < 0 || line >= MAX_RP_PORTS || ((info = rp_table[line]) == NULL)) - return -ENXIO; - port = &info->port; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - if (port->flags & ASYNC_CLOSING) { - retval = wait_for_completion_interruptible(&info->close_wait); - free_page(page); - if (retval) - return retval; - return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - } - - /* - * We must not sleep from here until the port is marked fully in use. - */ - if (info->xmit_buf) - free_page(page); - else - info->xmit_buf = (unsigned char *) page; - - tty->driver_data = info; - tty_port_tty_set(port, tty); - - if (port->count++ == 0) { - atomic_inc(&rp_num_ports_open); - -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rocket mod++ = %d...\n", - atomic_read(&rp_num_ports_open)); -#endif - } -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count); -#endif - - /* - * Info->count is now 1; so it's safe to sleep now. - */ - if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) { - cp = &info->channel; - sSetRxTrigger(cp, TRIG_1); - if (sGetChanStatus(cp) & CD_ACT) - info->cd_status = 1; - else - info->cd_status = 0; - sDisRxStatusMode(cp); - sFlushRxFIFO(cp); - sFlushTxFIFO(cp); - - sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); - sSetRxTrigger(cp, TRIG_1); - - sGetChanStatus(cp); - sDisRxStatusMode(cp); - sClrTxXOFF(cp); - - sDisCTSFlowCtl(cp); - sDisTxSoftFlowCtl(cp); - - sEnRxFIFO(cp); - sEnTransmit(cp); - - set_bit(ASYNCB_INITIALIZED, &info->port.flags); - - /* - * Set up the tty->alt_speed kludge - */ - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - tty->alt_speed = 57600; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - tty->alt_speed = 115200; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - tty->alt_speed = 230400; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - tty->alt_speed = 460800; - - configure_r_port(tty, info, NULL); - if (tty->termios->c_cflag & CBAUD) { - sSetDTR(cp); - sSetRTS(cp); - } - } - /* Starts (or resets) the maint polling loop */ - mod_timer(&rocket_timer, jiffies + POLL_PERIOD); - - retval = tty_port_block_til_ready(port, tty, filp); - if (retval) { -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval); -#endif - return retval; - } - return 0; -} - -/* - * Exception handler that closes a serial port. info->port.count is considered critical. - */ -static void rp_close(struct tty_struct *tty, struct file *filp) -{ - struct r_port *info = tty->driver_data; - struct tty_port *port = &info->port; - int timeout; - CHANNEL_t *cp; - - if (rocket_paranoia_check(info, "rp_close")) - return; - -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count); -#endif - - if (tty_port_close_start(port, tty, filp) == 0) - return; - - mutex_lock(&port->mutex); - cp = &info->channel; - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps; - if (timeout == 0) - timeout = 1; - rp_wait_until_sent(tty, timeout); - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - - sDisTransmit(cp); - sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); - sDisCTSFlowCtl(cp); - sDisTxSoftFlowCtl(cp); - sClrTxXOFF(cp); - sFlushRxFIFO(cp); - sFlushTxFIFO(cp); - sClrRTS(cp); - if (C_HUPCL(tty)) - sClrDTR(cp); - - rp_flush_buffer(tty); - - tty_ldisc_flush(tty); - - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - - /* We can't yet use tty_port_close_end as the buffer handling in this - driver is a bit different to the usual */ - - if (port->blocked_open) { - if (port->close_delay) { - msleep_interruptible(jiffies_to_msecs(port->close_delay)); - } - wake_up_interruptible(&port->open_wait); - } else { - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - } - spin_lock_irq(&port->lock); - info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE); - tty->closing = 0; - spin_unlock_irq(&port->lock); - mutex_unlock(&port->mutex); - tty_port_tty_set(port, NULL); - - wake_up_interruptible(&port->close_wait); - complete_all(&info->close_wait); - atomic_dec(&rp_num_ports_open); - -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rocket mod-- = %d...\n", - atomic_read(&rp_num_ports_open)); - printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line); -#endif - -} - -static void rp_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - unsigned cflag; - - if (rocket_paranoia_check(info, "rp_set_termios")) - return; - - cflag = tty->termios->c_cflag; - - /* - * This driver doesn't support CS5 or CS6 - */ - if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6)) - tty->termios->c_cflag = - ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE)); - /* Or CMSPAR */ - tty->termios->c_cflag &= ~CMSPAR; - - configure_r_port(tty, info, old_termios); - - cp = &info->channel; - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) { - sClrDTR(cp); - sClrRTS(cp); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) { - if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS)) - sSetRTS(cp); - sSetDTR(cp); - } - - if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rp_start(tty); - } -} - -static int rp_break(struct tty_struct *tty, int break_state) -{ - struct r_port *info = tty->driver_data; - unsigned long flags; - - if (rocket_paranoia_check(info, "rp_break")) - return -EINVAL; - - spin_lock_irqsave(&info->slock, flags); - if (break_state == -1) - sSendBreak(&info->channel); - else - sClrBreak(&info->channel); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} - -/* - * sGetChanRI used to be a macro in rocket_int.h. When the functionality for - * the UPCI boards was added, it was decided to make this a function because - * the macro was getting too complicated. All cases except the first one - * (UPCIRingInd) are taken directly from the original macro. - */ -static int sGetChanRI(CHANNEL_T * ChP) -{ - CONTROLLER_t *CtlP = ChP->CtlP; - int ChanNum = ChP->ChanNum; - int RingInd = 0; - - if (CtlP->UPCIRingInd) - RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]); - else if (CtlP->AltChanRingIndicator) - RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT; - else if (CtlP->boardType == ROCKET_TYPE_PC104) - RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]); - - return RingInd; -} - -/********************************************************************************************/ -/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */ - -/* - * Returns the state of the serial modem control lines. These next 2 functions - * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs. - */ -static int rp_tiocmget(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - unsigned int control, result, ChanStatus; - - ChanStatus = sGetChanStatusLo(&info->channel); - control = info->channel.TxControl[3]; - result = ((control & SET_RTS) ? TIOCM_RTS : 0) | - ((control & SET_DTR) ? TIOCM_DTR : 0) | - ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) | - (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) | - ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) | - ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0); - - return result; -} - -/* - * Sets the modem control lines - */ -static int rp_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct r_port *info = tty->driver_data; - - if (set & TIOCM_RTS) - info->channel.TxControl[3] |= SET_RTS; - if (set & TIOCM_DTR) - info->channel.TxControl[3] |= SET_DTR; - if (clear & TIOCM_RTS) - info->channel.TxControl[3] &= ~SET_RTS; - if (clear & TIOCM_DTR) - info->channel.TxControl[3] &= ~SET_DTR; - - out32(info->channel.IndexAddr, info->channel.TxControl); - return 0; -} - -static int get_config(struct r_port *info, struct rocket_config __user *retinfo) -{ - struct rocket_config tmp; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof (tmp)); - mutex_lock(&info->port.mutex); - tmp.line = info->line; - tmp.flags = info->flags; - tmp.close_delay = info->port.close_delay; - tmp.closing_wait = info->port.closing_wait; - tmp.port = rcktpt_io_addr[(info->line >> 5) & 3]; - mutex_unlock(&info->port.mutex); - - if (copy_to_user(retinfo, &tmp, sizeof (*retinfo))) - return -EFAULT; - return 0; -} - -static int set_config(struct tty_struct *tty, struct r_port *info, - struct rocket_config __user *new_info) -{ - struct rocket_config new_serial; - - if (copy_from_user(&new_serial, new_info, sizeof (new_serial))) - return -EFAULT; - - mutex_lock(&info->port.mutex); - if (!capable(CAP_SYS_ADMIN)) - { - if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) { - mutex_unlock(&info->port.mutex); - return -EPERM; - } - info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); - configure_r_port(tty, info, NULL); - mutex_unlock(&info->port.mutex); - return 0; - } - - info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS)); - info->port.close_delay = new_serial.close_delay; - info->port.closing_wait = new_serial.closing_wait; - - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - tty->alt_speed = 57600; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - tty->alt_speed = 115200; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - tty->alt_speed = 230400; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - tty->alt_speed = 460800; - mutex_unlock(&info->port.mutex); - - configure_r_port(tty, info, NULL); - return 0; -} - -/* - * This function fills in a rocket_ports struct with information - * about what boards/ports are in the system. This info is passed - * to user space. See setrocket.c where the info is used to create - * the /dev/ttyRx ports. - */ -static int get_ports(struct r_port *info, struct rocket_ports __user *retports) -{ - struct rocket_ports tmp; - int board; - - if (!retports) - return -EFAULT; - memset(&tmp, 0, sizeof (tmp)); - tmp.tty_major = rocket_driver->major; - - for (board = 0; board < 4; board++) { - tmp.rocketModel[board].model = rocketModel[board].model; - strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString); - tmp.rocketModel[board].numPorts = rocketModel[board].numPorts; - tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2; - tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber; - } - if (copy_to_user(retports, &tmp, sizeof (*retports))) - return -EFAULT; - return 0; -} - -static int reset_rm2(struct r_port *info, void __user *arg) -{ - int reset; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - if (copy_from_user(&reset, arg, sizeof (int))) - return -EFAULT; - if (reset) - reset = 1; - - if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII && - rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII) - return -EINVAL; - - if (info->ctlp->BusType == isISA) - sModemReset(info->ctlp, info->chan, reset); - else - sPCIModemReset(info->ctlp, info->chan, reset); - - return 0; -} - -static int get_version(struct r_port *info, struct rocket_version __user *retvers) -{ - if (copy_to_user(retvers, &driver_version, sizeof (*retvers))) - return -EFAULT; - return 0; -} - -/* IOCTL call handler into the driver */ -static int rp_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct r_port *info = tty->driver_data; - void __user *argp = (void __user *)arg; - int ret = 0; - - if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl")) - return -ENXIO; - - switch (cmd) { - case RCKP_GET_STRUCT: - if (copy_to_user(argp, info, sizeof (struct r_port))) - ret = -EFAULT; - break; - case RCKP_GET_CONFIG: - ret = get_config(info, argp); - break; - case RCKP_SET_CONFIG: - ret = set_config(tty, info, argp); - break; - case RCKP_GET_PORTS: - ret = get_ports(info, argp); - break; - case RCKP_RESET_RM2: - ret = reset_rm2(info, argp); - break; - case RCKP_GET_VERSION: - ret = get_version(info, argp); - break; - default: - ret = -ENOIOCTLCMD; - } - return ret; -} - -static void rp_send_xchar(struct tty_struct *tty, char ch) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - - if (rocket_paranoia_check(info, "rp_send_xchar")) - return; - - cp = &info->channel; - if (sGetTxCnt(cp)) - sWriteTxPrioByte(cp, ch); - else - sWriteTxByte(sGetTxRxDataIO(cp), ch); -} - -static void rp_throttle(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - -#ifdef ROCKET_DEBUG_THROTTLE - printk(KERN_INFO "throttle %s: %d....\n", tty->name, - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (rocket_paranoia_check(info, "rp_throttle")) - return; - - cp = &info->channel; - if (I_IXOFF(tty)) - rp_send_xchar(tty, STOP_CHAR(tty)); - - sClrRTS(&info->channel); -} - -static void rp_unthrottle(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; -#ifdef ROCKET_DEBUG_THROTTLE - printk(KERN_INFO "unthrottle %s: %d....\n", tty->name, - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (rocket_paranoia_check(info, "rp_throttle")) - return; - - cp = &info->channel; - if (I_IXOFF(tty)) - rp_send_xchar(tty, START_CHAR(tty)); - - sSetRTS(&info->channel); -} - -/* - * ------------------------------------------------------------ - * rp_stop() and rp_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rp_stop(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - -#ifdef ROCKET_DEBUG_FLOW - printk(KERN_INFO "stop %s: %d %d....\n", tty->name, - info->xmit_cnt, info->xmit_fifo_room); -#endif - - if (rocket_paranoia_check(info, "rp_stop")) - return; - - if (sGetTxCnt(&info->channel)) - sDisTransmit(&info->channel); -} - -static void rp_start(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - -#ifdef ROCKET_DEBUG_FLOW - printk(KERN_INFO "start %s: %d %d....\n", tty->name, - info->xmit_cnt, info->xmit_fifo_room); -#endif - - if (rocket_paranoia_check(info, "rp_stop")) - return; - - sEnTransmit(&info->channel); - set_bit((info->aiop * 8) + info->chan, - (void *) &xmit_flags[info->board]); -} - -/* - * rp_wait_until_sent() --- wait until the transmitter is empty - */ -static void rp_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - unsigned long orig_jiffies; - int check_time, exit_time; - int txcnt; - - if (rocket_paranoia_check(info, "rp_wait_until_sent")) - return; - - cp = &info->channel; - - orig_jiffies = jiffies; -#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...\n", timeout, - jiffies); - printk(KERN_INFO "cps=%d...\n", info->cps); -#endif - while (1) { - txcnt = sGetTxCnt(cp); - if (!txcnt) { - if (sGetChanStatusLo(cp) & TXSHRMT) - break; - check_time = (HZ / info->cps) / 5; - } else { - check_time = HZ * txcnt / info->cps; - } - if (timeout) { - exit_time = orig_jiffies + timeout - jiffies; - if (exit_time <= 0) - break; - if (exit_time < check_time) - check_time = exit_time; - } - if (check_time == 0) - check_time = 1; -#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt, - jiffies, check_time); -#endif - msleep_interruptible(jiffies_to_msecs(check_time)); - if (signal_pending(current)) - break; - } - __set_current_state(TASK_RUNNING); -#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies); -#endif -} - -/* - * rp_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void rp_hangup(struct tty_struct *tty) -{ - CHANNEL_t *cp; - struct r_port *info = tty->driver_data; - unsigned long flags; - - if (rocket_paranoia_check(info, "rp_hangup")) - return; - -#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP)) - printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); -#endif - rp_flush_buffer(tty); - spin_lock_irqsave(&info->port.lock, flags); - if (info->port.flags & ASYNC_CLOSING) { - spin_unlock_irqrestore(&info->port.lock, flags); - return; - } - if (info->port.count) - atomic_dec(&rp_num_ports_open); - clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - spin_unlock_irqrestore(&info->port.lock, flags); - - tty_port_hangup(&info->port); - - cp = &info->channel; - sDisRxFIFO(cp); - sDisTransmit(cp); - sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); - sDisCTSFlowCtl(cp); - sDisTxSoftFlowCtl(cp); - sClrTxXOFF(cp); - clear_bit(ASYNCB_INITIALIZED, &info->port.flags); - - wake_up_interruptible(&info->port.open_wait); -} - -/* - * Exception handler - write char routine. The RocketPort driver uses a - * double-buffering strategy, with the twist that if the in-memory CPU - * buffer is empty, and there's space in the transmit FIFO, the - * writing routines will write directly to transmit FIFO. - * Write buffer and counters protected by spinlocks - */ -static int rp_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - unsigned long flags; - - if (rocket_paranoia_check(info, "rp_put_char")) - return 0; - - /* - * Grab the port write mutex, locking out other processes that try to - * write to this port - */ - mutex_lock(&info->write_mtx); - -#ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_put_char %c...\n", ch); -#endif - - spin_lock_irqsave(&info->slock, flags); - cp = &info->channel; - - if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0) - info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); - - if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) { - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= XMIT_BUF_SIZE - 1; - info->xmit_cnt++; - set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - } else { - sOutB(sGetTxRxDataIO(cp), ch); - info->xmit_fifo_room--; - } - spin_unlock_irqrestore(&info->slock, flags); - mutex_unlock(&info->write_mtx); - return 1; -} - -/* - * Exception handler - write routine, called when user app writes to the device. - * A per port write mutex is used to protect from another process writing to - * this port at the same time. This other process could be running on the other CPU - * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out). - * Spinlocks protect the info xmit members. - */ -static int rp_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - const unsigned char *b; - int c, retval = 0; - unsigned long flags; - - if (count <= 0 || rocket_paranoia_check(info, "rp_write")) - return 0; - - if (mutex_lock_interruptible(&info->write_mtx)) - return -ERESTARTSYS; - -#ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_write %d chars...\n", count); -#endif - cp = &info->channel; - - if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count) - info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); - - /* - * If the write queue for the port is empty, and there is FIFO space, stuff bytes - * into FIFO. Use the write queue for temp storage. - */ - if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) { - c = min(count, info->xmit_fifo_room); - b = buf; - - /* Push data into FIFO, 2 bytes at a time */ - sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2); - - /* If there is a byte remaining, write it */ - if (c & 1) - sOutB(sGetTxRxDataIO(cp), b[c - 1]); - - retval += c; - buf += c; - count -= c; - - spin_lock_irqsave(&info->slock, flags); - info->xmit_fifo_room -= c; - spin_unlock_irqrestore(&info->slock, flags); - } - - /* If count is zero, we wrote it all and are done */ - if (!count) - goto end; - - /* Write remaining data into the port's xmit_buf */ - while (1) { - /* Hung up ? */ - if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags)) - goto end; - c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); - c = min(c, XMIT_BUF_SIZE - info->xmit_head); - if (c <= 0) - break; - - b = buf; - memcpy(info->xmit_buf + info->xmit_head, b, c); - - spin_lock_irqsave(&info->slock, flags); - info->xmit_head = - (info->xmit_head + c) & (XMIT_BUF_SIZE - 1); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->slock, flags); - - buf += c; - count -= c; - retval += c; - } - - if ((retval > 0) && !tty->stopped && !tty->hw_stopped) - set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - -end: - if (info->xmit_cnt < WAKEUP_CHARS) { - tty_wakeup(tty); -#ifdef ROCKETPORT_HAVE_POLL_WAIT - wake_up_interruptible(&tty->poll_wait); -#endif - } - mutex_unlock(&info->write_mtx); - return retval; -} - -/* - * Return the number of characters that can be sent. We estimate - * only using the in-memory transmit buffer only, and ignore the - * potential space in the transmit FIFO. - */ -static int rp_write_room(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - int ret; - - if (rocket_paranoia_check(info, "rp_write_room")) - return 0; - - ret = XMIT_BUF_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; -#ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_write_room returns %d...\n", ret); -#endif - return ret; -} - -/* - * Return the number of characters in the buffer. Again, this only - * counts those characters in the in-memory transmit buffer. - */ -static int rp_chars_in_buffer(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - - if (rocket_paranoia_check(info, "rp_chars_in_buffer")) - return 0; - - cp = &info->channel; - -#ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt); -#endif - return info->xmit_cnt; -} - -/* - * Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the - * r_port struct for the port. Note that spinlock are used to protect info members, - * do not call this function if the spinlock is already held. - */ -static void rp_flush_buffer(struct tty_struct *tty) -{ - struct r_port *info = tty->driver_data; - CHANNEL_t *cp; - unsigned long flags; - - if (rocket_paranoia_check(info, "rp_flush_buffer")) - return; - - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&info->slock, flags); - -#ifdef ROCKETPORT_HAVE_POLL_WAIT - wake_up_interruptible(&tty->poll_wait); -#endif - tty_wakeup(tty); - - cp = &info->channel; - sFlushTxFIFO(cp); -} - -#ifdef CONFIG_PCI - -static struct pci_device_id __devinitdata __used rocket_pci_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) }, - { } -}; -MODULE_DEVICE_TABLE(pci, rocket_pci_ids); - -/* - * Called when a PCI card is found. Retrieves and stores model information, - * init's aiopic and serial port hardware. - * Inputs: i is the board number (0-n) - */ -static __init int register_PCI(int i, struct pci_dev *dev) -{ - int num_aiops, aiop, max_num_aiops, num_chan, chan; - unsigned int aiopio[MAX_AIOPS_PER_BOARD]; - char *str, *board_type; - CONTROLLER_t *ctlp; - - int fast_clock = 0; - int altChanRingIndicator = 0; - int ports_per_aiop = 8; - WordIO_t ConfigIO = 0; - ByteIO_t UPCIRingInd = 0; - - if (!dev || pci_enable_device(dev)) - return 0; - - rcktpt_io_addr[i] = pci_resource_start(dev, 0); - - rcktpt_type[i] = ROCKET_TYPE_NORMAL; - rocketModel[i].loadrm2 = 0; - rocketModel[i].startingPortNumber = nextLineNumber; - - /* Depending on the model, set up some config variables */ - switch (dev->device) { - case PCI_DEVICE_ID_RP4QUAD: - str = "Quadcable"; - max_num_aiops = 1; - ports_per_aiop = 4; - rocketModel[i].model = MODEL_RP4QUAD; - strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable"); - rocketModel[i].numPorts = 4; - break; - case PCI_DEVICE_ID_RP8OCTA: - str = "Octacable"; - max_num_aiops = 1; - rocketModel[i].model = MODEL_RP8OCTA; - strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_URP8OCTA: - str = "Octacable"; - max_num_aiops = 1; - rocketModel[i].model = MODEL_UPCI_RP8OCTA; - strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP8INTF: - str = "8"; - max_num_aiops = 1; - rocketModel[i].model = MODEL_RP8INTF; - strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_URP8INTF: - str = "8"; - max_num_aiops = 1; - rocketModel[i].model = MODEL_UPCI_RP8INTF; - strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP8J: - str = "8J"; - max_num_aiops = 1; - rocketModel[i].model = MODEL_RP8J; - strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP4J: - str = "4J"; - max_num_aiops = 1; - ports_per_aiop = 4; - rocketModel[i].model = MODEL_RP4J; - strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors"); - rocketModel[i].numPorts = 4; - break; - case PCI_DEVICE_ID_RP8SNI: - str = "8 (DB78 Custom)"; - max_num_aiops = 1; - rocketModel[i].model = MODEL_RP8SNI; - strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP16SNI: - str = "16 (DB78 Custom)"; - max_num_aiops = 2; - rocketModel[i].model = MODEL_RP16SNI; - strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78"); - rocketModel[i].numPorts = 16; - break; - case PCI_DEVICE_ID_RP16INTF: - str = "16"; - max_num_aiops = 2; - rocketModel[i].model = MODEL_RP16INTF; - strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F"); - rocketModel[i].numPorts = 16; - break; - case PCI_DEVICE_ID_URP16INTF: - str = "16"; - max_num_aiops = 2; - rocketModel[i].model = MODEL_UPCI_RP16INTF; - strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F"); - rocketModel[i].numPorts = 16; - break; - case PCI_DEVICE_ID_CRP16INTF: - str = "16"; - max_num_aiops = 2; - rocketModel[i].model = MODEL_CPCI_RP16INTF; - strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F"); - rocketModel[i].numPorts = 16; - break; - case PCI_DEVICE_ID_RP32INTF: - str = "32"; - max_num_aiops = 4; - rocketModel[i].model = MODEL_RP32INTF; - strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F"); - rocketModel[i].numPorts = 32; - break; - case PCI_DEVICE_ID_URP32INTF: - str = "32"; - max_num_aiops = 4; - rocketModel[i].model = MODEL_UPCI_RP32INTF; - strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F"); - rocketModel[i].numPorts = 32; - break; - case PCI_DEVICE_ID_RPP4: - str = "Plus Quadcable"; - max_num_aiops = 1; - ports_per_aiop = 4; - altChanRingIndicator++; - fast_clock++; - rocketModel[i].model = MODEL_RPP4; - strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port"); - rocketModel[i].numPorts = 4; - break; - case PCI_DEVICE_ID_RPP8: - str = "Plus Octacable"; - max_num_aiops = 2; - ports_per_aiop = 4; - altChanRingIndicator++; - fast_clock++; - rocketModel[i].model = MODEL_RPP8; - strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port"); - rocketModel[i].numPorts = 8; - break; - case PCI_DEVICE_ID_RP2_232: - str = "Plus 2 (RS-232)"; - max_num_aiops = 1; - ports_per_aiop = 2; - altChanRingIndicator++; - fast_clock++; - rocketModel[i].model = MODEL_RP2_232; - strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232"); - rocketModel[i].numPorts = 2; - break; - case PCI_DEVICE_ID_RP2_422: - str = "Plus 2 (RS-422)"; - max_num_aiops = 1; - ports_per_aiop = 2; - altChanRingIndicator++; - fast_clock++; - rocketModel[i].model = MODEL_RP2_422; - strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422"); - rocketModel[i].numPorts = 2; - break; - case PCI_DEVICE_ID_RP6M: - - max_num_aiops = 1; - ports_per_aiop = 6; - str = "6-port"; - - /* If revision is 1, the rocketmodem flash must be loaded. - * If it is 2 it is a "socketed" version. */ - if (dev->revision == 1) { - rcktpt_type[i] = ROCKET_TYPE_MODEMII; - rocketModel[i].loadrm2 = 1; - } else { - rcktpt_type[i] = ROCKET_TYPE_MODEM; - } - - rocketModel[i].model = MODEL_RP6M; - strcpy(rocketModel[i].modelString, "RocketModem 6 port"); - rocketModel[i].numPorts = 6; - break; - case PCI_DEVICE_ID_RP4M: - max_num_aiops = 1; - ports_per_aiop = 4; - str = "4-port"; - if (dev->revision == 1) { - rcktpt_type[i] = ROCKET_TYPE_MODEMII; - rocketModel[i].loadrm2 = 1; - } else { - rcktpt_type[i] = ROCKET_TYPE_MODEM; - } - - rocketModel[i].model = MODEL_RP4M; - strcpy(rocketModel[i].modelString, "RocketModem 4 port"); - rocketModel[i].numPorts = 4; - break; - default: - str = "(unknown/unsupported)"; - max_num_aiops = 0; - break; - } - - /* - * Check for UPCI boards. - */ - - switch (dev->device) { - case PCI_DEVICE_ID_URP32INTF: - case PCI_DEVICE_ID_URP8INTF: - case PCI_DEVICE_ID_URP16INTF: - case PCI_DEVICE_ID_CRP16INTF: - case PCI_DEVICE_ID_URP8OCTA: - rcktpt_io_addr[i] = pci_resource_start(dev, 2); - ConfigIO = pci_resource_start(dev, 1); - if (dev->device == PCI_DEVICE_ID_URP8OCTA) { - UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; - - /* - * Check for octa or quad cable. - */ - if (! - (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) & - PCI_GPIO_CTRL_8PORT)) { - str = "Quadcable"; - ports_per_aiop = 4; - rocketModel[i].numPorts = 4; - } - } - break; - case PCI_DEVICE_ID_UPCI_RM3_8PORT: - str = "8 ports"; - max_num_aiops = 1; - rocketModel[i].model = MODEL_UPCI_RM3_8PORT; - strcpy(rocketModel[i].modelString, "RocketModem III 8 port"); - rocketModel[i].numPorts = 8; - rcktpt_io_addr[i] = pci_resource_start(dev, 2); - UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; - ConfigIO = pci_resource_start(dev, 1); - rcktpt_type[i] = ROCKET_TYPE_MODEMIII; - break; - case PCI_DEVICE_ID_UPCI_RM3_4PORT: - str = "4 ports"; - max_num_aiops = 1; - rocketModel[i].model = MODEL_UPCI_RM3_4PORT; - strcpy(rocketModel[i].modelString, "RocketModem III 4 port"); - rocketModel[i].numPorts = 4; - rcktpt_io_addr[i] = pci_resource_start(dev, 2); - UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; - ConfigIO = pci_resource_start(dev, 1); - rcktpt_type[i] = ROCKET_TYPE_MODEMIII; - break; - default: - break; - } - - switch (rcktpt_type[i]) { - case ROCKET_TYPE_MODEM: - board_type = "RocketModem"; - break; - case ROCKET_TYPE_MODEMII: - board_type = "RocketModem II"; - break; - case ROCKET_TYPE_MODEMIII: - board_type = "RocketModem III"; - break; - default: - board_type = "RocketPort"; - break; - } - - if (fast_clock) { - sClockPrescale = 0x12; /* mod 2 (divide by 3) */ - rp_baud_base[i] = 921600; - } else { - /* - * If support_low_speed is set, use the slow clock - * prescale, which supports 50 bps - */ - if (support_low_speed) { - /* mod 9 (divide by 10) prescale */ - sClockPrescale = 0x19; - rp_baud_base[i] = 230400; - } else { - /* mod 4 (devide by 5) prescale */ - sClockPrescale = 0x14; - rp_baud_base[i] = 460800; - } - } - - for (aiop = 0; aiop < max_num_aiops; aiop++) - aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40); - ctlp = sCtlNumToCtlPtr(i); - num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd); - for (aiop = 0; aiop < max_num_aiops; aiop++) - ctlp->AiopNumChan[aiop] = ports_per_aiop; - - dev_info(&dev->dev, "comtrol PCI controller #%d found at " - "address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n", - i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString, - rocketModel[i].startingPortNumber, - rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1); - - if (num_aiops <= 0) { - rcktpt_io_addr[i] = 0; - return (0); - } - is_PCI[i] = 1; - - /* Reset the AIOPIC, init the serial ports */ - for (aiop = 0; aiop < num_aiops; aiop++) { - sResetAiopByNum(ctlp, aiop); - num_chan = ports_per_aiop; - for (chan = 0; chan < num_chan; chan++) - init_r_port(i, aiop, chan, dev); - } - - /* Rocket modems must be reset */ - if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || - (rcktpt_type[i] == ROCKET_TYPE_MODEMII) || - (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) { - num_chan = ports_per_aiop; - for (chan = 0; chan < num_chan; chan++) - sPCIModemReset(ctlp, chan, 1); - msleep(500); - for (chan = 0; chan < num_chan; chan++) - sPCIModemReset(ctlp, chan, 0); - msleep(500); - rmSpeakerReset(ctlp, rocketModel[i].model); - } - return (1); -} - -/* - * Probes for PCI cards, inits them if found - * Input: board_found = number of ISA boards already found, or the - * starting board number - * Returns: Number of PCI boards found - */ -static int __init init_PCI(int boards_found) -{ - struct pci_dev *dev = NULL; - int count = 0; - - /* Work through the PCI device list, pulling out ours */ - while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) { - if (register_PCI(count + boards_found, dev)) - count++; - } - return (count); -} - -#endif /* CONFIG_PCI */ - -/* - * Probes for ISA cards - * Input: i = the board number to look for - * Returns: 1 if board found, 0 else - */ -static int __init init_ISA(int i) -{ - int num_aiops, num_chan = 0, total_num_chan = 0; - int aiop, chan; - unsigned int aiopio[MAX_AIOPS_PER_BOARD]; - CONTROLLER_t *ctlp; - char *type_string; - - /* If io_addr is zero, no board configured */ - if (rcktpt_io_addr[i] == 0) - return (0); - - /* Reserve the IO region */ - if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) { - printk(KERN_ERR "Unable to reserve IO region for configured " - "ISA RocketPort at address 0x%lx, board not " - "installed...\n", rcktpt_io_addr[i]); - rcktpt_io_addr[i] = 0; - return (0); - } - - ctlp = sCtlNumToCtlPtr(i); - - ctlp->boardType = rcktpt_type[i]; - - switch (rcktpt_type[i]) { - case ROCKET_TYPE_PC104: - type_string = "(PC104)"; - break; - case ROCKET_TYPE_MODEM: - type_string = "(RocketModem)"; - break; - case ROCKET_TYPE_MODEMII: - type_string = "(RocketModem II)"; - break; - default: - type_string = ""; - break; - } - - /* - * If support_low_speed is set, use the slow clock prescale, - * which supports 50 bps - */ - if (support_low_speed) { - sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */ - rp_baud_base[i] = 230400; - } else { - sClockPrescale = 0x14; /* mod 4 (devide by 5) prescale */ - rp_baud_base[i] = 460800; - } - - for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++) - aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400); - - num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio, MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0); - - if (ctlp->boardType == ROCKET_TYPE_PC104) { - sEnAiop(ctlp, 2); /* only one AIOPIC, but these */ - sEnAiop(ctlp, 3); /* CSels used for other stuff */ - } - - /* If something went wrong initing the AIOP's release the ISA IO memory */ - if (num_aiops <= 0) { - release_region(rcktpt_io_addr[i], 64); - rcktpt_io_addr[i] = 0; - return (0); - } - - rocketModel[i].startingPortNumber = nextLineNumber; - - for (aiop = 0; aiop < num_aiops; aiop++) { - sResetAiopByNum(ctlp, aiop); - sEnAiop(ctlp, aiop); - num_chan = sGetAiopNumChan(ctlp, aiop); - total_num_chan += num_chan; - for (chan = 0; chan < num_chan; chan++) - init_r_port(i, aiop, chan, NULL); - } - is_PCI[i] = 0; - if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) { - num_chan = sGetAiopNumChan(ctlp, 0); - total_num_chan = num_chan; - for (chan = 0; chan < num_chan; chan++) - sModemReset(ctlp, chan, 1); - msleep(500); - for (chan = 0; chan < num_chan; chan++) - sModemReset(ctlp, chan, 0); - msleep(500); - strcpy(rocketModel[i].modelString, "RocketModem ISA"); - } else { - strcpy(rocketModel[i].modelString, "RocketPort ISA"); - } - rocketModel[i].numPorts = total_num_chan; - rocketModel[i].model = MODEL_ISA; - - printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n", - i, rcktpt_io_addr[i], num_aiops, type_string); - - printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n", - rocketModel[i].modelString, - rocketModel[i].startingPortNumber, - rocketModel[i].startingPortNumber + - rocketModel[i].numPorts - 1); - - return (1); -} - -static const struct tty_operations rocket_ops = { - .open = rp_open, - .close = rp_close, - .write = rp_write, - .put_char = rp_put_char, - .write_room = rp_write_room, - .chars_in_buffer = rp_chars_in_buffer, - .flush_buffer = rp_flush_buffer, - .ioctl = rp_ioctl, - .throttle = rp_throttle, - .unthrottle = rp_unthrottle, - .set_termios = rp_set_termios, - .stop = rp_stop, - .start = rp_start, - .hangup = rp_hangup, - .break_ctl = rp_break, - .send_xchar = rp_send_xchar, - .wait_until_sent = rp_wait_until_sent, - .tiocmget = rp_tiocmget, - .tiocmset = rp_tiocmset, -}; - -static const struct tty_port_operations rocket_port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - -/* - * The module "startup" routine; it's run when the module is loaded. - */ -static int __init rp_init(void) -{ - int ret = -ENOMEM, pci_boards_found, isa_boards_found, i; - - printk(KERN_INFO "RocketPort device driver module, version %s, %s\n", - ROCKET_VERSION, ROCKET_DATE); - - rocket_driver = alloc_tty_driver(MAX_RP_PORTS); - if (!rocket_driver) - goto err; - - /* - * If board 1 is non-zero, there is at least one ISA configured. If controller is - * zero, use the default controller IO address of board1 + 0x40. - */ - if (board1) { - if (controller == 0) - controller = board1 + 0x40; - } else { - controller = 0; /* Used as a flag, meaning no ISA boards */ - } - - /* If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */ - if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) { - printk(KERN_ERR "Unable to reserve IO region for first " - "configured ISA RocketPort controller 0x%lx. " - "Driver exiting\n", controller); - ret = -EBUSY; - goto err_tty; - } - - /* Store ISA variable retrieved from command line or .conf file. */ - rcktpt_io_addr[0] = board1; - rcktpt_io_addr[1] = board2; - rcktpt_io_addr[2] = board3; - rcktpt_io_addr[3] = board4; - - rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; - rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0]; - rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; - rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1]; - rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; - rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2]; - rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; - rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3]; - - /* - * Set up the tty driver structure and then register this - * driver with the tty layer. - */ - - rocket_driver->owner = THIS_MODULE; - rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV; - rocket_driver->name = "ttyR"; - rocket_driver->driver_name = "Comtrol RocketPort"; - rocket_driver->major = TTY_ROCKET_MAJOR; - rocket_driver->minor_start = 0; - rocket_driver->type = TTY_DRIVER_TYPE_SERIAL; - rocket_driver->subtype = SERIAL_TYPE_NORMAL; - rocket_driver->init_termios = tty_std_termios; - rocket_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - rocket_driver->init_termios.c_ispeed = 9600; - rocket_driver->init_termios.c_ospeed = 9600; -#ifdef ROCKET_SOFT_FLOW - rocket_driver->flags |= TTY_DRIVER_REAL_RAW; -#endif - tty_set_operations(rocket_driver, &rocket_ops); - - ret = tty_register_driver(rocket_driver); - if (ret < 0) { - printk(KERN_ERR "Couldn't install tty RocketPort driver\n"); - goto err_controller; - } - -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major); -#endif - - /* - * OK, let's probe each of the controllers looking for boards. Any boards found - * will be initialized here. - */ - isa_boards_found = 0; - pci_boards_found = 0; - - for (i = 0; i < NUM_BOARDS; i++) { - if (init_ISA(i)) - isa_boards_found++; - } - -#ifdef CONFIG_PCI - if (isa_boards_found < NUM_BOARDS) - pci_boards_found = init_PCI(isa_boards_found); -#endif - - max_board = pci_boards_found + isa_boards_found; - - if (max_board == 0) { - printk(KERN_ERR "No rocketport ports found; unloading driver\n"); - ret = -ENXIO; - goto err_ttyu; - } - - return 0; -err_ttyu: - tty_unregister_driver(rocket_driver); -err_controller: - if (controller) - release_region(controller, 4); -err_tty: - put_tty_driver(rocket_driver); -err: - return ret; -} - - -static void rp_cleanup_module(void) -{ - int retval; - int i; - - del_timer_sync(&rocket_timer); - - retval = tty_unregister_driver(rocket_driver); - if (retval) - printk(KERN_ERR "Error %d while trying to unregister " - "rocketport driver\n", -retval); - - for (i = 0; i < MAX_RP_PORTS; i++) - if (rp_table[i]) { - tty_unregister_device(rocket_driver, i); - kfree(rp_table[i]); - } - - put_tty_driver(rocket_driver); - - for (i = 0; i < NUM_BOARDS; i++) { - if (rcktpt_io_addr[i] <= 0 || is_PCI[i]) - continue; - release_region(rcktpt_io_addr[i], 64); - } - if (controller) - release_region(controller, 4); -} - -/*************************************************************************** -Function: sInitController -Purpose: Initialization of controller global registers and controller - structure. -Call: sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize, - IRQNum,Frequency,PeriodicOnly) - CONTROLLER_T *CtlP; Ptr to controller structure - int CtlNum; Controller number - ByteIO_t MudbacIO; Mudbac base I/O address. - ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. - This list must be in the order the AIOPs will be found on the - controller. Once an AIOP in the list is not found, it is - assumed that there are no more AIOPs on the controller. - int AiopIOListSize; Number of addresses in AiopIOList - int IRQNum; Interrupt Request number. Can be any of the following: - 0: Disable global interrupts - 3: IRQ 3 - 4: IRQ 4 - 5: IRQ 5 - 9: IRQ 9 - 10: IRQ 10 - 11: IRQ 11 - 12: IRQ 12 - 15: IRQ 15 - Byte_t Frequency: A flag identifying the frequency - of the periodic interrupt, can be any one of the following: - FREQ_DIS - periodic interrupt disabled - FREQ_137HZ - 137 Hertz - FREQ_69HZ - 69 Hertz - FREQ_34HZ - 34 Hertz - FREQ_17HZ - 17 Hertz - FREQ_9HZ - 9 Hertz - FREQ_4HZ - 4 Hertz - If IRQNum is set to 0 the Frequency parameter is - overidden, it is forced to a value of FREQ_DIS. - int PeriodicOnly: 1 if all interrupts except the periodic - interrupt are to be blocked. - 0 is both the periodic interrupt and - other channel interrupts are allowed. - If IRQNum is set to 0 the PeriodicOnly parameter is - overidden, it is forced to a value of 0. -Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller - initialization failed. - -Comments: - If periodic interrupts are to be disabled but AIOP interrupts - are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. - - If interrupts are to be completely disabled set IRQNum to 0. - - Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an - invalid combination. - - This function performs initialization of global interrupt modes, - but it does not actually enable global interrupts. To enable - and disable global interrupts use functions sEnGlobalInt() and - sDisGlobalInt(). Enabling of global interrupts is normally not - done until all other initializations are complete. - - Even if interrupts are globally enabled, they must also be - individually enabled for each channel that is to generate - interrupts. - -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. - - After this function all AIOPs on the controller are disabled, - they can be enabled with sEnAiop(). -*/ -static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, - ByteIO_t * AiopIOList, int AiopIOListSize, - int IRQNum, Byte_t Frequency, int PeriodicOnly) -{ - int i; - ByteIO_t io; - int done; - - CtlP->AiopIntrBits = aiop_intr_bits; - CtlP->AltChanRingIndicator = 0; - CtlP->CtlNum = CtlNum; - CtlP->CtlID = CTLID_0001; /* controller release 1 */ - CtlP->BusType = isISA; - CtlP->MBaseIO = MudbacIO; - CtlP->MReg1IO = MudbacIO + 1; - CtlP->MReg2IO = MudbacIO + 2; - CtlP->MReg3IO = MudbacIO + 3; -#if 1 - CtlP->MReg2 = 0; /* interrupt disable */ - CtlP->MReg3 = 0; /* no periodic interrupts */ -#else - if (sIRQMap[IRQNum] == 0) { /* interrupts globally disabled */ - CtlP->MReg2 = 0; /* interrupt disable */ - CtlP->MReg3 = 0; /* no periodic interrupts */ - } else { - CtlP->MReg2 = sIRQMap[IRQNum]; /* set IRQ number */ - CtlP->MReg3 = Frequency; /* set frequency */ - if (PeriodicOnly) { /* periodic interrupt only */ - CtlP->MReg3 |= PERIODIC_ONLY; - } - } -#endif - sOutB(CtlP->MReg2IO, CtlP->MReg2); - sOutB(CtlP->MReg3IO, CtlP->MReg3); - sControllerEOI(CtlP); /* clear EOI if warm init */ - /* Init AIOPs */ - CtlP->NumAiop = 0; - for (i = done = 0; i < AiopIOListSize; i++) { - io = AiopIOList[i]; - CtlP->AiopIO[i] = (WordIO_t) io; - CtlP->AiopIntChanIO[i] = io + _INT_CHAN; - sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */ - sOutB(MudbacIO, (Byte_t) (io >> 6)); /* set up AIOP I/O in MUDBAC */ - if (done) - continue; - sEnAiop(CtlP, i); /* enable the AIOP */ - CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ - if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ - done = 1; /* done looking for AIOPs */ - else { - CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ - sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ - sOutB(io + _INDX_DATA, sClockPrescale); - CtlP->NumAiop++; /* bump count of AIOPs */ - } - sDisAiop(CtlP, i); /* disable AIOP */ - } - - if (CtlP->NumAiop == 0) - return (-1); - else - return (CtlP->NumAiop); -} - -/*************************************************************************** -Function: sPCIInitController -Purpose: Initialization of controller global registers and controller - structure. -Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, - IRQNum,Frequency,PeriodicOnly) - CONTROLLER_T *CtlP; Ptr to controller structure - int CtlNum; Controller number - ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. - This list must be in the order the AIOPs will be found on the - controller. Once an AIOP in the list is not found, it is - assumed that there are no more AIOPs on the controller. - int AiopIOListSize; Number of addresses in AiopIOList - int IRQNum; Interrupt Request number. Can be any of the following: - 0: Disable global interrupts - 3: IRQ 3 - 4: IRQ 4 - 5: IRQ 5 - 9: IRQ 9 - 10: IRQ 10 - 11: IRQ 11 - 12: IRQ 12 - 15: IRQ 15 - Byte_t Frequency: A flag identifying the frequency - of the periodic interrupt, can be any one of the following: - FREQ_DIS - periodic interrupt disabled - FREQ_137HZ - 137 Hertz - FREQ_69HZ - 69 Hertz - FREQ_34HZ - 34 Hertz - FREQ_17HZ - 17 Hertz - FREQ_9HZ - 9 Hertz - FREQ_4HZ - 4 Hertz - If IRQNum is set to 0 the Frequency parameter is - overidden, it is forced to a value of FREQ_DIS. - int PeriodicOnly: 1 if all interrupts except the periodic - interrupt are to be blocked. - 0 is both the periodic interrupt and - other channel interrupts are allowed. - If IRQNum is set to 0 the PeriodicOnly parameter is - overidden, it is forced to a value of 0. -Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller - initialization failed. - -Comments: - If periodic interrupts are to be disabled but AIOP interrupts - are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. - - If interrupts are to be completely disabled set IRQNum to 0. - - Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an - invalid combination. - - This function performs initialization of global interrupt modes, - but it does not actually enable global interrupts. To enable - and disable global interrupts use functions sEnGlobalInt() and - sDisGlobalInt(). Enabling of global interrupts is normally not - done until all other initializations are complete. - - Even if interrupts are globally enabled, they must also be - individually enabled for each channel that is to generate - interrupts. - -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. - - After this function all AIOPs on the controller are disabled, - they can be enabled with sEnAiop(). -*/ -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd) -{ - int i; - ByteIO_t io; - - CtlP->AltChanRingIndicator = altChanRingIndicator; - CtlP->UPCIRingInd = UPCIRingInd; - CtlP->CtlNum = CtlNum; - CtlP->CtlID = CTLID_0001; /* controller release 1 */ - CtlP->BusType = isPCI; /* controller release 1 */ - - if (ConfigIO) { - CtlP->isUPCI = 1; - CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; - CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; - CtlP->AiopIntrBits = upci_aiop_intr_bits; - } else { - CtlP->isUPCI = 0; - CtlP->PCIIO = - (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); - CtlP->AiopIntrBits = aiop_intr_bits; - } - - sPCIControllerEOI(CtlP); /* clear EOI if warm init */ - /* Init AIOPs */ - CtlP->NumAiop = 0; - for (i = 0; i < AiopIOListSize; i++) { - io = AiopIOList[i]; - CtlP->AiopIO[i] = (WordIO_t) io; - CtlP->AiopIntChanIO[i] = io + _INT_CHAN; - - CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ - if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ - break; /* done looking for AIOPs */ - - CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ - sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ - sOutB(io + _INDX_DATA, sClockPrescale); - CtlP->NumAiop++; /* bump count of AIOPs */ - } - - if (CtlP->NumAiop == 0) - return (-1); - else - return (CtlP->NumAiop); -} - -/*************************************************************************** -Function: sReadAiopID -Purpose: Read the AIOP idenfication number directly from an AIOP. -Call: sReadAiopID(io) - ByteIO_t io: AIOP base I/O address -Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X - is replace by an identifying number. - Flag AIOPID_NULL if no valid AIOP is found -Warnings: No context switches are allowed while executing this function. - -*/ -static int sReadAiopID(ByteIO_t io) -{ - Byte_t AiopID; /* ID byte from AIOP */ - - sOutB(io + _CMD_REG, RESET_ALL); /* reset AIOP */ - sOutB(io + _CMD_REG, 0x0); - AiopID = sInW(io + _CHN_STAT0) & 0x07; - if (AiopID == 0x06) - return (1); - else /* AIOP does not exist */ - return (-1); -} - -/*************************************************************************** -Function: sReadAiopNumChan -Purpose: Read the number of channels available in an AIOP directly from - an AIOP. -Call: sReadAiopNumChan(io) - WordIO_t io: AIOP base I/O address -Return: int: The number of channels available -Comments: The number of channels is determined by write/reads from identical - offsets within the SRAM address spaces for channels 0 and 4. - If the channel 4 space is mirrored to channel 0 it is a 4 channel - AIOP, otherwise it is an 8 channel. -Warnings: No context switches are allowed while executing this function. -*/ -static int sReadAiopNumChan(WordIO_t io) -{ - Word_t x; - static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 }; - - /* write to chan 0 SRAM */ - out32((DWordIO_t) io + _INDX_ADDR, R); - sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */ - x = sInW(io + _INDX_DATA); - sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */ - if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */ - return (8); - else - return (4); -} - -/*************************************************************************** -Function: sInitChan -Purpose: Initialization of a channel and channel structure -Call: sInitChan(CtlP,ChP,AiopNum,ChanNum) - CONTROLLER_T *CtlP; Ptr to controller structure - CHANNEL_T *ChP; Ptr to channel structure - int AiopNum; AIOP number within controller - int ChanNum; Channel number within AIOP -Return: int: 1 if initialization succeeded, 0 if it fails because channel - number exceeds number of channels available in AIOP. -Comments: This function must be called before a channel can be used. -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. -*/ -static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum, - int ChanNum) -{ - int i; - WordIO_t AiopIO; - WordIO_t ChIOOff; - Byte_t *ChR; - Word_t ChOff; - static Byte_t R[4]; - int brd9600; - - if (ChanNum >= CtlP->AiopNumChan[AiopNum]) - return 0; /* exceeds num chans in AIOP */ - - /* Channel, AIOP, and controller identifiers */ - ChP->CtlP = CtlP; - ChP->ChanID = CtlP->AiopID[AiopNum]; - ChP->AiopNum = AiopNum; - ChP->ChanNum = ChanNum; - - /* Global direct addresses */ - AiopIO = CtlP->AiopIO[AiopNum]; - ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG; - ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN; - ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK; - ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR; - ChP->IndexData = AiopIO + _INDX_DATA; - - /* Channel direct addresses */ - ChIOOff = AiopIO + ChP->ChanNum * 2; - ChP->TxRxData = ChIOOff + _TD0; - ChP->ChanStat = ChIOOff + _CHN_STAT0; - ChP->TxRxCount = ChIOOff + _FIFO_CNT0; - ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0; - - /* Initialize the channel from the RData array */ - for (i = 0; i < RDATASIZE; i += 4) { - R[0] = RData[i]; - R[1] = RData[i + 1] + 0x10 * ChanNum; - R[2] = RData[i + 2]; - R[3] = RData[i + 3]; - out32(ChP->IndexAddr, R); - } - - ChR = ChP->R; - for (i = 0; i < RREGDATASIZE; i += 4) { - ChR[i] = RRegData[i]; - ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum; - ChR[i + 2] = RRegData[i + 2]; - ChR[i + 3] = RRegData[i + 3]; - } - - /* Indexed registers */ - ChOff = (Word_t) ChanNum *0x1000; - - if (sClockPrescale == 0x14) - brd9600 = 47; - else - brd9600 = 23; - - ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD); - ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8); - ChP->BaudDiv[2] = (Byte_t) brd9600; - ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8); - out32(ChP->IndexAddr, ChP->BaudDiv); - - ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL); - ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8); - ChP->TxControl[2] = 0; - ChP->TxControl[3] = 0; - out32(ChP->IndexAddr, ChP->TxControl); - - ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL); - ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8); - ChP->RxControl[2] = 0; - ChP->RxControl[3] = 0; - out32(ChP->IndexAddr, ChP->RxControl); - - ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS); - ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8); - ChP->TxEnables[2] = 0; - ChP->TxEnables[3] = 0; - out32(ChP->IndexAddr, ChP->TxEnables); - - ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1); - ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8); - ChP->TxCompare[2] = 0; - ChP->TxCompare[3] = 0; - out32(ChP->IndexAddr, ChP->TxCompare); - - ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1); - ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8); - ChP->TxReplace1[2] = 0; - ChP->TxReplace1[3] = 0; - out32(ChP->IndexAddr, ChP->TxReplace1); - - ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2); - ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8); - ChP->TxReplace2[2] = 0; - ChP->TxReplace2[3] = 0; - out32(ChP->IndexAddr, ChP->TxReplace2); - - ChP->TxFIFOPtrs = ChOff + _TXF_OUTP; - ChP->TxFIFO = ChOff + _TX_FIFO; - - sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */ - sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Tx FIFO count */ - sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */ - sOutW(ChP->IndexData, 0); - ChP->RxFIFOPtrs = ChOff + _RXF_OUTP; - ChP->RxFIFO = ChOff + _RX_FIFO; - - sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */ - sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Rx FIFO count */ - sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */ - sOutW(ChP->IndexData, 0); - sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */ - sOutW(ChP->IndexData, 0); - ChP->TxPrioCnt = ChOff + _TXP_CNT; - sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt); - sOutB(ChP->IndexData, 0); - ChP->TxPrioPtr = ChOff + _TXP_PNTR; - sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr); - sOutB(ChP->IndexData, 0); - ChP->TxPrioBuf = ChOff + _TXP_BUF; - sEnRxProcessor(ChP); /* start the Rx processor */ - - return 1; -} - -/*************************************************************************** -Function: sStopRxProcessor -Purpose: Stop the receive processor from processing a channel. -Call: sStopRxProcessor(ChP) - CHANNEL_T *ChP; Ptr to channel structure - -Comments: The receive processor can be started again with sStartRxProcessor(). - This function causes the receive processor to skip over the - stopped channel. It does not stop it from processing other channels. - -Warnings: No context switches are allowed while executing this function. - - Do not leave the receive processor stopped for more than one - character time. - - After calling this function a delay of 4 uS is required to ensure - that the receive processor is no longer processing this channel. -*/ -static void sStopRxProcessor(CHANNEL_T * ChP) -{ - Byte_t R[4]; - - R[0] = ChP->R[0]; - R[1] = ChP->R[1]; - R[2] = 0x0a; - R[3] = ChP->R[3]; - out32(ChP->IndexAddr, R); -} - -/*************************************************************************** -Function: sFlushRxFIFO -Purpose: Flush the Rx FIFO -Call: sFlushRxFIFO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: void -Comments: To prevent data from being enqueued or dequeued in the Tx FIFO - while it is being flushed the receive processor is stopped - and the transmitter is disabled. After these operations a - 4 uS delay is done before clearing the pointers to allow - the receive processor to stop. These items are handled inside - this function. -Warnings: No context switches are allowed while executing this function. -*/ -static void sFlushRxFIFO(CHANNEL_T * ChP) -{ - int i; - Byte_t Ch; /* channel number within AIOP */ - int RxFIFOEnabled; /* 1 if Rx FIFO enabled */ - - if (sGetRxCnt(ChP) == 0) /* Rx FIFO empty */ - return; /* don't need to flush */ - - RxFIFOEnabled = 0; - if (ChP->R[0x32] == 0x08) { /* Rx FIFO is enabled */ - RxFIFOEnabled = 1; - sDisRxFIFO(ChP); /* disable it */ - for (i = 0; i < 2000 / 200; i++) /* delay 2 uS to allow proc to disable FIFO */ - sInB(ChP->IntChan); /* depends on bus i/o timing */ - } - sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */ - Ch = (Byte_t) sGetChanNum(ChP); - sOutB(ChP->Cmd, Ch | RESRXFCNT); /* apply reset Rx FIFO count */ - sOutB(ChP->Cmd, Ch); /* remove reset Rx FIFO count */ - sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */ - sOutW(ChP->IndexData, 0); - sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */ - sOutW(ChP->IndexData, 0); - if (RxFIFOEnabled) - sEnRxFIFO(ChP); /* enable Rx FIFO */ -} - -/*************************************************************************** -Function: sFlushTxFIFO -Purpose: Flush the Tx FIFO -Call: sFlushTxFIFO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: void -Comments: To prevent data from being enqueued or dequeued in the Tx FIFO - while it is being flushed the receive processor is stopped - and the transmitter is disabled. After these operations a - 4 uS delay is done before clearing the pointers to allow - the receive processor to stop. These items are handled inside - this function. -Warnings: No context switches are allowed while executing this function. -*/ -static void sFlushTxFIFO(CHANNEL_T * ChP) -{ - int i; - Byte_t Ch; /* channel number within AIOP */ - int TxEnabled; /* 1 if transmitter enabled */ - - if (sGetTxCnt(ChP) == 0) /* Tx FIFO empty */ - return; /* don't need to flush */ - - TxEnabled = 0; - if (ChP->TxControl[3] & TX_ENABLE) { - TxEnabled = 1; - sDisTransmit(ChP); /* disable transmitter */ - } - sStopRxProcessor(ChP); /* stop Rx processor */ - for (i = 0; i < 4000 / 200; i++) /* delay 4 uS to allow proc to stop */ - sInB(ChP->IntChan); /* depends on bus i/o timing */ - Ch = (Byte_t) sGetChanNum(ChP); - sOutB(ChP->Cmd, Ch | RESTXFCNT); /* apply reset Tx FIFO count */ - sOutB(ChP->Cmd, Ch); /* remove reset Tx FIFO count */ - sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */ - sOutW(ChP->IndexData, 0); - if (TxEnabled) - sEnTransmit(ChP); /* enable transmitter */ - sStartRxProcessor(ChP); /* restart Rx processor */ -} - -/*************************************************************************** -Function: sWriteTxPrioByte -Purpose: Write a byte of priority transmit data to a channel -Call: sWriteTxPrioByte(ChP,Data) - CHANNEL_T *ChP; Ptr to channel structure - Byte_t Data; The transmit data byte - -Return: int: 1 if the bytes is successfully written, otherwise 0. - -Comments: The priority byte is transmitted before any data in the Tx FIFO. - -Warnings: No context switches are allowed while executing this function. -*/ -static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data) -{ - Byte_t DWBuf[4]; /* buffer for double word writes */ - Word_t *WordPtr; /* must be far because Win SS != DS */ - register DWordIO_t IndexAddr; - - if (sGetTxCnt(ChP) > 1) { /* write it to Tx priority buffer */ - IndexAddr = ChP->IndexAddr; - sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt); /* get priority buffer status */ - if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */ - return (0); /* nothing sent */ - - WordPtr = (Word_t *) (&DWBuf[0]); - *WordPtr = ChP->TxPrioBuf; /* data byte address */ - - DWBuf[2] = Data; /* data byte value */ - out32(IndexAddr, DWBuf); /* write it out */ - - *WordPtr = ChP->TxPrioCnt; /* Tx priority count address */ - - DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */ - DWBuf[3] = 0; /* priority buffer pointer */ - out32(IndexAddr, DWBuf); /* write it out */ - } else { /* write it to Tx FIFO */ - - sWriteTxByte(sGetTxRxDataIO(ChP), Data); - } - return (1); /* 1 byte sent */ -} - -/*************************************************************************** -Function: sEnInterrupts -Purpose: Enable one or more interrupts for a channel -Call: sEnInterrupts(ChP,Flags) - CHANNEL_T *ChP; Ptr to channel structure - Word_t Flags: Interrupt enable flags, can be any combination - of the following flags: - TXINT_EN: Interrupt on Tx FIFO empty - RXINT_EN: Interrupt on Rx FIFO at trigger level (see - sSetRxTrigger()) - SRCINT_EN: Interrupt on SRC (Special Rx Condition) - MCINT_EN: Interrupt on modem input change - CHANINT_EN: Allow channel interrupt signal to the AIOP's - Interrupt Channel Register. -Return: void -Comments: If an interrupt enable flag is set in Flags, that interrupt will be - enabled. If an interrupt enable flag is not set in Flags, that - interrupt will not be changed. Interrupts can be disabled with - function sDisInterrupts(). - - This function sets the appropriate bit for the channel in the AIOP's - Interrupt Mask Register if the CHANINT_EN flag is set. This allows - this channel's bit to be set in the AIOP's Interrupt Channel Register. - - Interrupts must also be globally enabled before channel interrupts - will be passed on to the host. This is done with function - sEnGlobalInt(). - - In some cases it may be desirable to disable interrupts globally but - enable channel interrupts. This would allow the global interrupt - status register to be used to determine which AIOPs need service. -*/ -static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags) -{ - Byte_t Mask; /* Interrupt Mask Register */ - - ChP->RxControl[2] |= - ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN)); - - out32(ChP->IndexAddr, ChP->RxControl); - - ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN); - - out32(ChP->IndexAddr, ChP->TxControl); - - if (Flags & CHANINT_EN) { - Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum]; - sOutB(ChP->IntMask, Mask); - } -} - -/*************************************************************************** -Function: sDisInterrupts -Purpose: Disable one or more interrupts for a channel -Call: sDisInterrupts(ChP,Flags) - CHANNEL_T *ChP; Ptr to channel structure - Word_t Flags: Interrupt flags, can be any combination - of the following flags: - TXINT_EN: Interrupt on Tx FIFO empty - RXINT_EN: Interrupt on Rx FIFO at trigger level (see - sSetRxTrigger()) - SRCINT_EN: Interrupt on SRC (Special Rx Condition) - MCINT_EN: Interrupt on modem input change - CHANINT_EN: Disable channel interrupt signal to the - AIOP's Interrupt Channel Register. -Return: void -Comments: If an interrupt flag is set in Flags, that interrupt will be - disabled. If an interrupt flag is not set in Flags, that - interrupt will not be changed. Interrupts can be enabled with - function sEnInterrupts(). - - This function clears the appropriate bit for the channel in the AIOP's - Interrupt Mask Register if the CHANINT_EN flag is set. This blocks - this channel's bit from being set in the AIOP's Interrupt Channel - Register. -*/ -static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags) -{ - Byte_t Mask; /* Interrupt Mask Register */ - - ChP->RxControl[2] &= - ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN)); - out32(ChP->IndexAddr, ChP->RxControl); - ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN); - out32(ChP->IndexAddr, ChP->TxControl); - - if (Flags & CHANINT_EN) { - Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum]; - sOutB(ChP->IntMask, Mask); - } -} - -static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode) -{ - sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum); -} - -/* - * Not an official SSCI function, but how to reset RocketModems. - * ISA bus version - */ -static void sModemReset(CONTROLLER_T * CtlP, int chan, int on) -{ - ByteIO_t addr; - Byte_t val; - - addr = CtlP->AiopIO[0] + 0x400; - val = sInB(CtlP->MReg3IO); - /* if AIOP[1] is not enabled, enable it */ - if ((val & 2) == 0) { - val = sInB(CtlP->MReg2IO); - sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03)); - sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6)); - } - - sEnAiop(CtlP, 1); - if (!on) - addr += 8; - sOutB(addr + chan, 0); /* apply or remove reset */ - sDisAiop(CtlP, 1); -} - -/* - * Not an official SSCI function, but how to reset RocketModems. - * PCI bus version - */ -static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on) -{ - ByteIO_t addr; - - addr = CtlP->AiopIO[0] + 0x40; /* 2nd AIOP */ - if (!on) - addr += 8; - sOutB(addr + chan, 0); /* apply or remove reset */ -} - -/* Resets the speaker controller on RocketModem II and III devices */ -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) -{ - ByteIO_t addr; - - /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ - if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { - addr = CtlP->AiopIO[0] + 0x4F; - sOutB(addr, 0); - } - - /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ - if ((model == MODEL_UPCI_RM3_8PORT) - || (model == MODEL_UPCI_RM3_4PORT)) { - addr = CtlP->AiopIO[0] + 0x88; - sOutB(addr, 0); - } -} - -/* Returns the line number given the controller (board), aiop and channel number */ -static unsigned char GetLineNumber(int ctrl, int aiop, int ch) -{ - return lineNumbers[(ctrl << 5) | (aiop << 3) | ch]; -} - -/* - * Stores the line number associated with a given controller (board), aiop - * and channel number. - * Returns: The line number assigned - */ -static unsigned char SetLineNumber(int ctrl, int aiop, int ch) -{ - lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++; - return (nextLineNumber - 1); -} diff --git a/drivers/char/rocket.h b/drivers/char/rocket.h deleted file mode 100644 index ec863f35f1a9..000000000000 --- a/drivers/char/rocket.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * rocket.h --- the exported interface of the rocket driver to its configuration program. - * - * Written by Theodore Ts'o, Copyright 1997. - * Copyright 1997 Comtrol Corporation. - * - */ - -/* Model Information Struct */ -typedef struct { - unsigned long model; - char modelString[80]; - unsigned long numPorts; - int loadrm2; - int startingPortNumber; -} rocketModel_t; - -struct rocket_config { - int line; - int flags; - int closing_wait; - int close_delay; - int port; - int reserved[32]; -}; - -struct rocket_ports { - int tty_major; - int callout_major; - rocketModel_t rocketModel[8]; -}; - -struct rocket_version { - char rocket_version[32]; - char rocket_date[32]; - char reserved[64]; -}; - -/* - * Rocketport flags - */ -/*#define ROCKET_CALLOUT_NOHUP 0x00000001 */ -#define ROCKET_FORCE_CD 0x00000002 -#define ROCKET_HUP_NOTIFY 0x00000004 -#define ROCKET_SPLIT_TERMIOS 0x00000008 -#define ROCKET_SPD_MASK 0x00000070 -#define ROCKET_SPD_HI 0x00000010 /* Use 56000 instead of 38400 bps */ -#define ROCKET_SPD_VHI 0x00000020 /* Use 115200 instead of 38400 bps */ -#define ROCKET_SPD_SHI 0x00000030 /* Use 230400 instead of 38400 bps */ -#define ROCKET_SPD_WARP 0x00000040 /* Use 460800 instead of 38400 bps */ -#define ROCKET_SAK 0x00000080 -#define ROCKET_SESSION_LOCKOUT 0x00000100 -#define ROCKET_PGRP_LOCKOUT 0x00000200 -#define ROCKET_RTS_TOGGLE 0x00000400 -#define ROCKET_MODE_MASK 0x00003000 -#define ROCKET_MODE_RS232 0x00000000 -#define ROCKET_MODE_RS485 0x00001000 -#define ROCKET_MODE_RS422 0x00002000 -#define ROCKET_FLAGS 0x00003FFF - -#define ROCKET_USR_MASK 0x0071 /* Legal flags that non-privileged - * users can set or reset */ - -/* - * For closing_wait and closing_wait2 - */ -#define ROCKET_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE -#define ROCKET_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF - -/* - * Rocketport ioctls -- "RP" - */ -#define RCKP_GET_STRUCT 0x00525001 -#define RCKP_GET_CONFIG 0x00525002 -#define RCKP_SET_CONFIG 0x00525003 -#define RCKP_GET_PORTS 0x00525004 -#define RCKP_RESET_RM2 0x00525005 -#define RCKP_GET_VERSION 0x00525006 - -/* Rocketport Models */ -#define MODEL_RP32INTF 0x0001 /* RP 32 port w/external I/F */ -#define MODEL_RP8INTF 0x0002 /* RP 8 port w/external I/F */ -#define MODEL_RP16INTF 0x0003 /* RP 16 port w/external I/F */ -#define MODEL_RP8OCTA 0x0005 /* RP 8 port w/octa cable */ -#define MODEL_RP4QUAD 0x0004 /* RP 4 port w/quad cable */ -#define MODEL_RP8J 0x0006 /* RP 8 port w/RJ11 connectors */ -#define MODEL_RP4J 0x0007 /* RP 4 port w/RJ45 connectors */ -#define MODEL_RP8SNI 0x0008 /* RP 8 port w/ DB78 SNI connector */ -#define MODEL_RP16SNI 0x0009 /* RP 16 port w/ DB78 SNI connector */ -#define MODEL_RPP4 0x000A /* RP Plus 4 port */ -#define MODEL_RPP8 0x000B /* RP Plus 8 port */ -#define MODEL_RP2_232 0x000E /* RP Plus 2 port RS232 */ -#define MODEL_RP2_422 0x000F /* RP Plus 2 port RS232 */ - -/* Rocketmodem II Models */ -#define MODEL_RP6M 0x000C /* RM 6 port */ -#define MODEL_RP4M 0x000D /* RM 4 port */ - -/* Universal PCI boards */ -#define MODEL_UPCI_RP32INTF 0x0801 /* RP UPCI 32 port w/external I/F */ -#define MODEL_UPCI_RP8INTF 0x0802 /* RP UPCI 8 port w/external I/F */ -#define MODEL_UPCI_RP16INTF 0x0803 /* RP UPCI 16 port w/external I/F */ -#define MODEL_UPCI_RP8OCTA 0x0805 /* RP UPCI 8 port w/octa cable */ -#define MODEL_UPCI_RM3_8PORT 0x080C /* RP UPCI Rocketmodem III 8 port */ -#define MODEL_UPCI_RM3_4PORT 0x080C /* RP UPCI Rocketmodem III 4 port */ - -/* Compact PCI 16 port */ -#define MODEL_CPCI_RP16INTF 0x0903 /* RP Compact PCI 16 port w/external I/F */ - -/* All ISA boards */ -#define MODEL_ISA 0x1000 diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h deleted file mode 100644 index 67e0f1e778a2..000000000000 --- a/drivers/char/rocket_int.h +++ /dev/null @@ -1,1214 +0,0 @@ -/* - * rocket_int.h --- internal header file for rocket.c - * - * Written by Theodore Ts'o, Copyright 1997. - * Copyright 1997 Comtrol Corporation. - * - */ - -/* - * Definition of the types in rcktpt_type - */ -#define ROCKET_TYPE_NORMAL 0 -#define ROCKET_TYPE_MODEM 1 -#define ROCKET_TYPE_MODEMII 2 -#define ROCKET_TYPE_MODEMIII 3 -#define ROCKET_TYPE_PC104 4 - -#include - -#include -#include - -typedef unsigned char Byte_t; -typedef unsigned int ByteIO_t; - -typedef unsigned int Word_t; -typedef unsigned int WordIO_t; - -typedef unsigned int DWordIO_t; - -/* - * Note! Normally the Linux I/O macros already take care of - * byte-swapping the I/O instructions. However, all accesses using - * sOutDW aren't really 32-bit accesses, but should be handled in byte - * order. Hence the use of the cpu_to_le32() macro to byte-swap - * things to no-op the byte swapping done by the big-endian outl() - * instruction. - */ - -static inline void sOutB(unsigned short port, unsigned char value) -{ -#ifdef ROCKET_DEBUG_IO - printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value); -#endif - outb_p(value, port); -} - -static inline void sOutW(unsigned short port, unsigned short value) -{ -#ifdef ROCKET_DEBUG_IO - printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value); -#endif - outw_p(value, port); -} - -static inline void out32(unsigned short port, Byte_t *p) -{ - u32 value = get_unaligned_le32(p); -#ifdef ROCKET_DEBUG_IO - printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value); -#endif - outl_p(value, port); -} - -static inline unsigned char sInB(unsigned short port) -{ - return inb_p(port); -} - -static inline unsigned short sInW(unsigned short port) -{ - return inw_p(port); -} - -/* This is used to move arrays of bytes so byte swapping isn't appropriate. */ -#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count) -#define sInStrW(port, addr, count) if (count) insw(port, addr, count) - -#define CTL_SIZE 8 -#define AIOP_CTL_SIZE 4 -#define CHAN_AIOP_SIZE 8 -#define MAX_PORTS_PER_AIOP 8 -#define MAX_AIOPS_PER_BOARD 4 -#define MAX_PORTS_PER_BOARD 32 - -/* Bus type ID */ -#define isISA 0 -#define isPCI 1 -#define isMC 2 - -/* Controller ID numbers */ -#define CTLID_NULL -1 /* no controller exists */ -#define CTLID_0001 0x0001 /* controller release 1 */ - -/* AIOP ID numbers, identifies AIOP type implementing channel */ -#define AIOPID_NULL -1 /* no AIOP or channel exists */ -#define AIOPID_0001 0x0001 /* AIOP release 1 */ - -/************************************************************************ - Global Register Offsets - Direct Access - Fixed values -************************************************************************/ - -#define _CMD_REG 0x38 /* Command Register 8 Write */ -#define _INT_CHAN 0x39 /* Interrupt Channel Register 8 Read */ -#define _INT_MASK 0x3A /* Interrupt Mask Register 8 Read / Write */ -#define _UNUSED 0x3B /* Unused 8 */ -#define _INDX_ADDR 0x3C /* Index Register Address 16 Write */ -#define _INDX_DATA 0x3E /* Index Register Data 8/16 Read / Write */ - -/************************************************************************ - Channel Register Offsets for 1st channel in AIOP - Direct Access -************************************************************************/ -#define _TD0 0x00 /* Transmit Data 16 Write */ -#define _RD0 0x00 /* Receive Data 16 Read */ -#define _CHN_STAT0 0x20 /* Channel Status 8/16 Read / Write */ -#define _FIFO_CNT0 0x10 /* Transmit/Receive FIFO Count 16 Read */ -#define _INT_ID0 0x30 /* Interrupt Identification 8 Read */ - -/************************************************************************ - Tx Control Register Offsets - Indexed - External - Fixed -************************************************************************/ -#define _TX_ENBLS 0x980 /* Tx Processor Enables Register 8 Read / Write */ -#define _TXCMP1 0x988 /* Transmit Compare Value #1 8 Read / Write */ -#define _TXCMP2 0x989 /* Transmit Compare Value #2 8 Read / Write */ -#define _TXREP1B1 0x98A /* Tx Replace Value #1 - Byte 1 8 Read / Write */ -#define _TXREP1B2 0x98B /* Tx Replace Value #1 - Byte 2 8 Read / Write */ -#define _TXREP2 0x98C /* Transmit Replace Value #2 8 Read / Write */ - -/************************************************************************ -Memory Controller Register Offsets - Indexed - External - Fixed -************************************************************************/ -#define _RX_FIFO 0x000 /* Rx FIFO */ -#define _TX_FIFO 0x800 /* Tx FIFO */ -#define _RXF_OUTP 0x990 /* Rx FIFO OUT pointer 16 Read / Write */ -#define _RXF_INP 0x992 /* Rx FIFO IN pointer 16 Read / Write */ -#define _TXF_OUTP 0x994 /* Tx FIFO OUT pointer 8 Read / Write */ -#define _TXF_INP 0x995 /* Tx FIFO IN pointer 8 Read / Write */ -#define _TXP_CNT 0x996 /* Tx Priority Count 8 Read / Write */ -#define _TXP_PNTR 0x997 /* Tx Priority Pointer 8 Read / Write */ - -#define PRI_PEND 0x80 /* Priority data pending (bit7, Tx pri cnt) */ -#define TXFIFO_SIZE 255 /* size of Tx FIFO */ -#define RXFIFO_SIZE 1023 /* size of Rx FIFO */ - -/************************************************************************ -Tx Priority Buffer - Indexed - External - Fixed -************************************************************************/ -#define _TXP_BUF 0x9C0 /* Tx Priority Buffer 32 Bytes Read / Write */ -#define TXP_SIZE 0x20 /* 32 bytes */ - -/************************************************************************ -Channel Register Offsets - Indexed - Internal - Fixed -************************************************************************/ - -#define _TX_CTRL 0xFF0 /* Transmit Control 16 Write */ -#define _RX_CTRL 0xFF2 /* Receive Control 8 Write */ -#define _BAUD 0xFF4 /* Baud Rate 16 Write */ -#define _CLK_PRE 0xFF6 /* Clock Prescaler 8 Write */ - -#define STMBREAK 0x08 /* BREAK */ -#define STMFRAME 0x04 /* framing error */ -#define STMRCVROVR 0x02 /* receiver over run error */ -#define STMPARITY 0x01 /* parity error */ -#define STMERROR (STMBREAK | STMFRAME | STMPARITY) -#define STMBREAKH 0x800 /* BREAK */ -#define STMFRAMEH 0x400 /* framing error */ -#define STMRCVROVRH 0x200 /* receiver over run error */ -#define STMPARITYH 0x100 /* parity error */ -#define STMERRORH (STMBREAKH | STMFRAMEH | STMPARITYH) - -#define CTS_ACT 0x20 /* CTS input asserted */ -#define DSR_ACT 0x10 /* DSR input asserted */ -#define CD_ACT 0x08 /* CD input asserted */ -#define TXFIFOMT 0x04 /* Tx FIFO is empty */ -#define TXSHRMT 0x02 /* Tx shift register is empty */ -#define RDA 0x01 /* Rx data available */ -#define DRAINED (TXFIFOMT | TXSHRMT) /* indicates Tx is drained */ - -#define STATMODE 0x8000 /* status mode enable bit */ -#define RXFOVERFL 0x2000 /* receive FIFO overflow */ -#define RX2MATCH 0x1000 /* receive compare byte 2 match */ -#define RX1MATCH 0x0800 /* receive compare byte 1 match */ -#define RXBREAK 0x0400 /* received BREAK */ -#define RXFRAME 0x0200 /* received framing error */ -#define RXPARITY 0x0100 /* received parity error */ -#define STATERROR (RXBREAK | RXFRAME | RXPARITY) - -#define CTSFC_EN 0x80 /* CTS flow control enable bit */ -#define RTSTOG_EN 0x40 /* RTS toggle enable bit */ -#define TXINT_EN 0x10 /* transmit interrupt enable */ -#define STOP2 0x08 /* enable 2 stop bits (0 = 1 stop) */ -#define PARITY_EN 0x04 /* enable parity (0 = no parity) */ -#define EVEN_PAR 0x02 /* even parity (0 = odd parity) */ -#define DATA8BIT 0x01 /* 8 bit data (0 = 7 bit data) */ - -#define SETBREAK 0x10 /* send break condition (must clear) */ -#define LOCALLOOP 0x08 /* local loopback set for test */ -#define SET_DTR 0x04 /* assert DTR */ -#define SET_RTS 0x02 /* assert RTS */ -#define TX_ENABLE 0x01 /* enable transmitter */ - -#define RTSFC_EN 0x40 /* RTS flow control enable */ -#define RXPROC_EN 0x20 /* receive processor enable */ -#define TRIG_NO 0x00 /* Rx FIFO trigger level 0 (no trigger) */ -#define TRIG_1 0x08 /* trigger level 1 char */ -#define TRIG_1_2 0x10 /* trigger level 1/2 */ -#define TRIG_7_8 0x18 /* trigger level 7/8 */ -#define TRIG_MASK 0x18 /* trigger level mask */ -#define SRCINT_EN 0x04 /* special Rx condition interrupt enable */ -#define RXINT_EN 0x02 /* Rx interrupt enable */ -#define MCINT_EN 0x01 /* modem change interrupt enable */ - -#define RXF_TRIG 0x20 /* Rx FIFO trigger level interrupt */ -#define TXFIFO_MT 0x10 /* Tx FIFO empty interrupt */ -#define SRC_INT 0x08 /* special receive condition interrupt */ -#define DELTA_CD 0x04 /* CD change interrupt */ -#define DELTA_CTS 0x02 /* CTS change interrupt */ -#define DELTA_DSR 0x01 /* DSR change interrupt */ - -#define REP1W2_EN 0x10 /* replace byte 1 with 2 bytes enable */ -#define IGN2_EN 0x08 /* ignore byte 2 enable */ -#define IGN1_EN 0x04 /* ignore byte 1 enable */ -#define COMP2_EN 0x02 /* compare byte 2 enable */ -#define COMP1_EN 0x01 /* compare byte 1 enable */ - -#define RESET_ALL 0x80 /* reset AIOP (all channels) */ -#define TXOVERIDE 0x40 /* Transmit software off override */ -#define RESETUART 0x20 /* reset channel's UART */ -#define RESTXFCNT 0x10 /* reset channel's Tx FIFO count register */ -#define RESRXFCNT 0x08 /* reset channel's Rx FIFO count register */ - -#define INTSTAT0 0x01 /* AIOP 0 interrupt status */ -#define INTSTAT1 0x02 /* AIOP 1 interrupt status */ -#define INTSTAT2 0x04 /* AIOP 2 interrupt status */ -#define INTSTAT3 0x08 /* AIOP 3 interrupt status */ - -#define INTR_EN 0x08 /* allow interrupts to host */ -#define INT_STROB 0x04 /* strobe and clear interrupt line (EOI) */ - -/************************************************************************** - MUDBAC remapped for PCI -**************************************************************************/ - -#define _CFG_INT_PCI 0x40 -#define _PCI_INT_FUNC 0x3A - -#define PCI_STROB 0x2000 /* bit 13 of int aiop register */ -#define INTR_EN_PCI 0x0010 /* allow interrupts to host */ - -/* - * Definitions for Universal PCI board registers - */ -#define _PCI_9030_INT_CTRL 0x4c /* Offsets from BAR1 */ -#define _PCI_9030_GPIO_CTRL 0x54 -#define PCI_INT_CTRL_AIOP 0x0001 -#define PCI_GPIO_CTRL_8PORT 0x4000 -#define _PCI_9030_RING_IND 0xc0 /* Offsets from BAR1 */ - -#define CHAN3_EN 0x08 /* enable AIOP 3 */ -#define CHAN2_EN 0x04 /* enable AIOP 2 */ -#define CHAN1_EN 0x02 /* enable AIOP 1 */ -#define CHAN0_EN 0x01 /* enable AIOP 0 */ -#define FREQ_DIS 0x00 -#define FREQ_274HZ 0x60 -#define FREQ_137HZ 0x50 -#define FREQ_69HZ 0x40 -#define FREQ_34HZ 0x30 -#define FREQ_17HZ 0x20 -#define FREQ_9HZ 0x10 -#define PERIODIC_ONLY 0x80 /* only PERIODIC interrupt */ - -#define CHANINT_EN 0x0100 /* flags to enable/disable channel ints */ - -#define RDATASIZE 72 -#define RREGDATASIZE 52 - -/* - * AIOP interrupt bits for ISA/PCI boards and UPCI boards. - */ -#define AIOP_INTR_BIT_0 0x0001 -#define AIOP_INTR_BIT_1 0x0002 -#define AIOP_INTR_BIT_2 0x0004 -#define AIOP_INTR_BIT_3 0x0008 - -#define AIOP_INTR_BITS ( \ - AIOP_INTR_BIT_0 \ - | AIOP_INTR_BIT_1 \ - | AIOP_INTR_BIT_2 \ - | AIOP_INTR_BIT_3) - -#define UPCI_AIOP_INTR_BIT_0 0x0004 -#define UPCI_AIOP_INTR_BIT_1 0x0020 -#define UPCI_AIOP_INTR_BIT_2 0x0100 -#define UPCI_AIOP_INTR_BIT_3 0x0800 - -#define UPCI_AIOP_INTR_BITS ( \ - UPCI_AIOP_INTR_BIT_0 \ - | UPCI_AIOP_INTR_BIT_1 \ - | UPCI_AIOP_INTR_BIT_2 \ - | UPCI_AIOP_INTR_BIT_3) - -/* Controller level information structure */ -typedef struct { - int CtlID; - int CtlNum; - int BusType; - int boardType; - int isUPCI; - WordIO_t PCIIO; - WordIO_t PCIIO2; - ByteIO_t MBaseIO; - ByteIO_t MReg1IO; - ByteIO_t MReg2IO; - ByteIO_t MReg3IO; - Byte_t MReg2; - Byte_t MReg3; - int NumAiop; - int AltChanRingIndicator; - ByteIO_t UPCIRingInd; - WordIO_t AiopIO[AIOP_CTL_SIZE]; - ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE]; - int AiopID[AIOP_CTL_SIZE]; - int AiopNumChan[AIOP_CTL_SIZE]; - Word_t *AiopIntrBits; -} CONTROLLER_T; - -typedef CONTROLLER_T CONTROLLER_t; - -/* Channel level information structure */ -typedef struct { - CONTROLLER_T *CtlP; - int AiopNum; - int ChanID; - int ChanNum; - int rtsToggle; - - ByteIO_t Cmd; - ByteIO_t IntChan; - ByteIO_t IntMask; - DWordIO_t IndexAddr; - WordIO_t IndexData; - - WordIO_t TxRxData; - WordIO_t ChanStat; - WordIO_t TxRxCount; - ByteIO_t IntID; - - Word_t TxFIFO; - Word_t TxFIFOPtrs; - Word_t RxFIFO; - Word_t RxFIFOPtrs; - Word_t TxPrioCnt; - Word_t TxPrioPtr; - Word_t TxPrioBuf; - - Byte_t R[RREGDATASIZE]; - - Byte_t BaudDiv[4]; - Byte_t TxControl[4]; - Byte_t RxControl[4]; - Byte_t TxEnables[4]; - Byte_t TxCompare[4]; - Byte_t TxReplace1[4]; - Byte_t TxReplace2[4]; -} CHANNEL_T; - -typedef CHANNEL_T CHANNEL_t; -typedef CHANNEL_T *CHANPTR_T; - -#define InterfaceModeRS232 0x00 -#define InterfaceModeRS422 0x08 -#define InterfaceModeRS485 0x10 -#define InterfaceModeRS232T 0x18 - -/*************************************************************************** -Function: sClrBreak -Purpose: Stop sending a transmit BREAK signal -Call: sClrBreak(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sClrBreak(ChP) \ -do { \ - (ChP)->TxControl[3] &= ~SETBREAK; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sClrDTR -Purpose: Clr the DTR output -Call: sClrDTR(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sClrDTR(ChP) \ -do { \ - (ChP)->TxControl[3] &= ~SET_DTR; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sClrRTS -Purpose: Clr the RTS output -Call: sClrRTS(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sClrRTS(ChP) \ -do { \ - if ((ChP)->rtsToggle) break; \ - (ChP)->TxControl[3] &= ~SET_RTS; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sClrTxXOFF -Purpose: Clear any existing transmit software flow control off condition -Call: sClrTxXOFF(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sClrTxXOFF(ChP) \ -do { \ - sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \ - sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \ -} while (0) - -/*************************************************************************** -Function: sCtlNumToCtlPtr -Purpose: Convert a controller number to controller structure pointer -Call: sCtlNumToCtlPtr(CtlNum) - int CtlNum; Controller number -Return: CONTROLLER_T *: Ptr to controller structure -*/ -#define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM] - -/*************************************************************************** -Function: sControllerEOI -Purpose: Strobe the MUDBAC's End Of Interrupt bit. -Call: sControllerEOI(CtlP) - CONTROLLER_T *CtlP; Ptr to controller structure -*/ -#define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB) - -/*************************************************************************** -Function: sPCIControllerEOI -Purpose: Strobe the PCI End Of Interrupt bit. - For the UPCI boards, toggle the AIOP interrupt enable bit - (this was taken from the Windows driver). -Call: sPCIControllerEOI(CtlP) - CONTROLLER_T *CtlP; Ptr to controller structure -*/ -#define sPCIControllerEOI(CTLP) \ -do { \ - if ((CTLP)->isUPCI) { \ - Word_t w = sInW((CTLP)->PCIIO); \ - sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \ - sOutW((CTLP)->PCIIO, w); \ - } \ - else { \ - sOutW((CTLP)->PCIIO, PCI_STROB); \ - } \ -} while (0) - -/*************************************************************************** -Function: sDisAiop -Purpose: Disable I/O access to an AIOP -Call: sDisAiop(CltP) - CONTROLLER_T *CtlP; Ptr to controller structure - int AiopNum; Number of AIOP on controller -*/ -#define sDisAiop(CTLP,AIOPNUM) \ -do { \ - (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \ - sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ -} while (0) - -/*************************************************************************** -Function: sDisCTSFlowCtl -Purpose: Disable output flow control using CTS -Call: sDisCTSFlowCtl(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisCTSFlowCtl(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~CTSFC_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sDisIXANY -Purpose: Disable IXANY Software Flow Control -Call: sDisIXANY(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisIXANY(ChP) \ -do { \ - (ChP)->R[0x0e] = 0x86; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \ -} while (0) - -/*************************************************************************** -Function: DisParity -Purpose: Disable parity -Call: sDisParity(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: Function sSetParity() can be used in place of functions sEnParity(), - sDisParity(), sSetOddParity(), and sSetEvenParity(). -*/ -#define sDisParity(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~PARITY_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sDisRTSToggle -Purpose: Disable RTS toggle -Call: sDisRTSToggle(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisRTSToggle(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~RTSTOG_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ - (ChP)->rtsToggle = 0; \ -} while (0) - -/*************************************************************************** -Function: sDisRxFIFO -Purpose: Disable Rx FIFO -Call: sDisRxFIFO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisRxFIFO(ChP) \ -do { \ - (ChP)->R[0x32] = 0x0a; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \ -} while (0) - -/*************************************************************************** -Function: sDisRxStatusMode -Purpose: Disable the Rx status mode -Call: sDisRxStatusMode(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This takes the channel out of the receive status mode. All - subsequent reads of receive data using sReadRxWord() will return - two data bytes. -*/ -#define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0) - -/*************************************************************************** -Function: sDisTransmit -Purpose: Disable transmit -Call: sDisTransmit(ChP) - CHANNEL_T *ChP; Ptr to channel structure - This disables movement of Tx data from the Tx FIFO into the 1 byte - Tx buffer. Therefore there could be up to a 2 byte latency - between the time sDisTransmit() is called and the transmit buffer - and transmit shift register going completely empty. -*/ -#define sDisTransmit(ChP) \ -do { \ - (ChP)->TxControl[3] &= ~TX_ENABLE; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sDisTxSoftFlowCtl -Purpose: Disable Tx Software Flow Control -Call: sDisTxSoftFlowCtl(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sDisTxSoftFlowCtl(ChP) \ -do { \ - (ChP)->R[0x06] = 0x8a; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ -} while (0) - -/*************************************************************************** -Function: sEnAiop -Purpose: Enable I/O access to an AIOP -Call: sEnAiop(CltP) - CONTROLLER_T *CtlP; Ptr to controller structure - int AiopNum; Number of AIOP on controller -*/ -#define sEnAiop(CTLP,AIOPNUM) \ -do { \ - (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \ - sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ -} while (0) - -/*************************************************************************** -Function: sEnCTSFlowCtl -Purpose: Enable output flow control using CTS -Call: sEnCTSFlowCtl(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnCTSFlowCtl(ChP) \ -do { \ - (ChP)->TxControl[2] |= CTSFC_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sEnIXANY -Purpose: Enable IXANY Software Flow Control -Call: sEnIXANY(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnIXANY(ChP) \ -do { \ - (ChP)->R[0x0e] = 0x21; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \ -} while (0) - -/*************************************************************************** -Function: EnParity -Purpose: Enable parity -Call: sEnParity(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: Function sSetParity() can be used in place of functions sEnParity(), - sDisParity(), sSetOddParity(), and sSetEvenParity(). - -Warnings: Before enabling parity odd or even parity should be chosen using - functions sSetOddParity() or sSetEvenParity(). -*/ -#define sEnParity(ChP) \ -do { \ - (ChP)->TxControl[2] |= PARITY_EN; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sEnRTSToggle -Purpose: Enable RTS toggle -Call: sEnRTSToggle(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This function will disable RTS flow control and clear the RTS - line to allow operation of RTS toggle. -*/ -#define sEnRTSToggle(ChP) \ -do { \ - (ChP)->RxControl[2] &= ~RTSFC_EN; \ - out32((ChP)->IndexAddr,(ChP)->RxControl); \ - (ChP)->TxControl[2] |= RTSTOG_EN; \ - (ChP)->TxControl[3] &= ~SET_RTS; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ - (ChP)->rtsToggle = 1; \ -} while (0) - -/*************************************************************************** -Function: sEnRxFIFO -Purpose: Enable Rx FIFO -Call: sEnRxFIFO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnRxFIFO(ChP) \ -do { \ - (ChP)->R[0x32] = 0x08; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \ -} while (0) - -/*************************************************************************** -Function: sEnRxProcessor -Purpose: Enable the receive processor -Call: sEnRxProcessor(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This function is used to start the receive processor. When - the channel is in the reset state the receive processor is not - running. This is done to prevent the receive processor from - executing invalid microcode instructions prior to the - downloading of the microcode. - -Warnings: This function must be called after valid microcode has been - downloaded to the AIOP, and it must not be called before the - microcode has been downloaded. -*/ -#define sEnRxProcessor(ChP) \ -do { \ - (ChP)->RxControl[2] |= RXPROC_EN; \ - out32((ChP)->IndexAddr,(ChP)->RxControl); \ -} while (0) - -/*************************************************************************** -Function: sEnRxStatusMode -Purpose: Enable the Rx status mode -Call: sEnRxStatusMode(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This places the channel in the receive status mode. All subsequent - reads of receive data using sReadRxWord() will return a data byte - in the low word and a status byte in the high word. - -*/ -#define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE) - -/*************************************************************************** -Function: sEnTransmit -Purpose: Enable transmit -Call: sEnTransmit(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnTransmit(ChP) \ -do { \ - (ChP)->TxControl[3] |= TX_ENABLE; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sEnTxSoftFlowCtl -Purpose: Enable Tx Software Flow Control -Call: sEnTxSoftFlowCtl(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sEnTxSoftFlowCtl(ChP) \ -do { \ - (ChP)->R[0x06] = 0xc5; \ - out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ -} while (0) - -/*************************************************************************** -Function: sGetAiopIntStatus -Purpose: Get the AIOP interrupt status -Call: sGetAiopIntStatus(CtlP,AiopNum) - CONTROLLER_T *CtlP; Ptr to controller structure - int AiopNum; AIOP number -Return: Byte_t: The AIOP interrupt status. Bits 0 through 7 - represent channels 0 through 7 respectively. If a - bit is set that channel is interrupting. -*/ -#define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM]) - -/*************************************************************************** -Function: sGetAiopNumChan -Purpose: Get the number of channels supported by an AIOP -Call: sGetAiopNumChan(CtlP,AiopNum) - CONTROLLER_T *CtlP; Ptr to controller structure - int AiopNum; AIOP number -Return: int: The number of channels supported by the AIOP -*/ -#define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM] - -/*************************************************************************** -Function: sGetChanIntID -Purpose: Get a channel's interrupt identification byte -Call: sGetChanIntID(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: Byte_t: The channel interrupt ID. Can be any - combination of the following flags: - RXF_TRIG: Rx FIFO trigger level interrupt - TXFIFO_MT: Tx FIFO empty interrupt - SRC_INT: Special receive condition interrupt - DELTA_CD: CD change interrupt - DELTA_CTS: CTS change interrupt - DELTA_DSR: DSR change interrupt -*/ -#define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR)) - -/*************************************************************************** -Function: sGetChanNum -Purpose: Get the number of a channel within an AIOP -Call: sGetChanNum(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: int: Channel number within AIOP, or NULLCHAN if channel does - not exist. -*/ -#define sGetChanNum(ChP) (ChP)->ChanNum - -/*************************************************************************** -Function: sGetChanStatus -Purpose: Get the channel status -Call: sGetChanStatus(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: Word_t: The channel status. Can be any combination of - the following flags: - LOW BYTE FLAGS - CTS_ACT: CTS input asserted - DSR_ACT: DSR input asserted - CD_ACT: CD input asserted - TXFIFOMT: Tx FIFO is empty - TXSHRMT: Tx shift register is empty - RDA: Rx data available - - HIGH BYTE FLAGS - STATMODE: status mode enable bit - RXFOVERFL: receive FIFO overflow - RX2MATCH: receive compare byte 2 match - RX1MATCH: receive compare byte 1 match - RXBREAK: received BREAK - RXFRAME: received framing error - RXPARITY: received parity error -Warnings: This function will clear the high byte flags in the Channel - Status Register. -*/ -#define sGetChanStatus(ChP) sInW((ChP)->ChanStat) - -/*************************************************************************** -Function: sGetChanStatusLo -Purpose: Get the low byte only of the channel status -Call: sGetChanStatusLo(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: Byte_t: The channel status low byte. Can be any combination - of the following flags: - CTS_ACT: CTS input asserted - DSR_ACT: DSR input asserted - CD_ACT: CD input asserted - TXFIFOMT: Tx FIFO is empty - TXSHRMT: Tx shift register is empty - RDA: Rx data available -*/ -#define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat) - -/********************************************************************** - * Get RI status of channel - * Defined as a function in rocket.c -aes - */ -#if 0 -#define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \ - (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \ - (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \ - (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \ - 0)) -#endif - -/*************************************************************************** -Function: sGetControllerIntStatus -Purpose: Get the controller interrupt status -Call: sGetControllerIntStatus(CtlP) - CONTROLLER_T *CtlP; Ptr to controller structure -Return: Byte_t: The controller interrupt status in the lower 4 - bits. Bits 0 through 3 represent AIOP's 0 - through 3 respectively. If a bit is set that - AIOP is interrupting. Bits 4 through 7 will - always be cleared. -*/ -#define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f) - -/*************************************************************************** -Function: sPCIGetControllerIntStatus -Purpose: Get the controller interrupt status -Call: sPCIGetControllerIntStatus(CtlP) - CONTROLLER_T *CtlP; Ptr to controller structure -Return: unsigned char: The controller interrupt status in the lower 4 - bits and bit 4. Bits 0 through 3 represent AIOP's 0 - through 3 respectively. Bit 4 is set if the int - was generated from periodic. If a bit is set the - AIOP is interrupting. -*/ -#define sPCIGetControllerIntStatus(CTLP) \ - ((CTLP)->isUPCI ? \ - (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \ - ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS)) - -/*************************************************************************** - -Function: sGetRxCnt -Purpose: Get the number of data bytes in the Rx FIFO -Call: sGetRxCnt(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: int: The number of data bytes in the Rx FIFO. -Comments: Byte read of count register is required to obtain Rx count. - -*/ -#define sGetRxCnt(ChP) sInW((ChP)->TxRxCount) - -/*************************************************************************** -Function: sGetTxCnt -Purpose: Get the number of data bytes in the Tx FIFO -Call: sGetTxCnt(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: Byte_t: The number of data bytes in the Tx FIFO. -Comments: Byte read of count register is required to obtain Tx count. - -*/ -#define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount) - -/***************************************************************************** -Function: sGetTxRxDataIO -Purpose: Get the I/O address of a channel's TxRx Data register -Call: sGetTxRxDataIO(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Return: WordIO_t: I/O address of a channel's TxRx Data register -*/ -#define sGetTxRxDataIO(ChP) (ChP)->TxRxData - -/*************************************************************************** -Function: sInitChanDefaults -Purpose: Initialize a channel structure to it's default state. -Call: sInitChanDefaults(ChP) - CHANNEL_T *ChP; Ptr to the channel structure -Comments: This function must be called once for every channel structure - that exists before any other SSCI calls can be made. - -*/ -#define sInitChanDefaults(ChP) \ -do { \ - (ChP)->CtlP = NULLCTLPTR; \ - (ChP)->AiopNum = NULLAIOP; \ - (ChP)->ChanID = AIOPID_NULL; \ - (ChP)->ChanNum = NULLCHAN; \ -} while (0) - -/*************************************************************************** -Function: sResetAiopByNum -Purpose: Reset the AIOP by number -Call: sResetAiopByNum(CTLP,AIOPNUM) - CONTROLLER_T CTLP; Ptr to controller structure - AIOPNUM; AIOP index -*/ -#define sResetAiopByNum(CTLP,AIOPNUM) \ -do { \ - sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \ - sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \ -} while (0) - -/*************************************************************************** -Function: sSendBreak -Purpose: Send a transmit BREAK signal -Call: sSendBreak(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSendBreak(ChP) \ -do { \ - (ChP)->TxControl[3] |= SETBREAK; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetBaud -Purpose: Set baud rate -Call: sSetBaud(ChP,Divisor) - CHANNEL_T *ChP; Ptr to channel structure - Word_t Divisor; 16 bit baud rate divisor for channel -*/ -#define sSetBaud(ChP,DIVISOR) \ -do { \ - (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \ - (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \ - out32((ChP)->IndexAddr,(ChP)->BaudDiv); \ -} while (0) - -/*************************************************************************** -Function: sSetData7 -Purpose: Set data bits to 7 -Call: sSetData7(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetData7(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~DATA8BIT; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetData8 -Purpose: Set data bits to 8 -Call: sSetData8(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetData8(ChP) \ -do { \ - (ChP)->TxControl[2] |= DATA8BIT; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetDTR -Purpose: Set the DTR output -Call: sSetDTR(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetDTR(ChP) \ -do { \ - (ChP)->TxControl[3] |= SET_DTR; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetEvenParity -Purpose: Set even parity -Call: sSetEvenParity(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: Function sSetParity() can be used in place of functions sEnParity(), - sDisParity(), sSetOddParity(), and sSetEvenParity(). - -Warnings: This function has no effect unless parity is enabled with function - sEnParity(). -*/ -#define sSetEvenParity(ChP) \ -do { \ - (ChP)->TxControl[2] |= EVEN_PAR; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetOddParity -Purpose: Set odd parity -Call: sSetOddParity(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: Function sSetParity() can be used in place of functions sEnParity(), - sDisParity(), sSetOddParity(), and sSetEvenParity(). - -Warnings: This function has no effect unless parity is enabled with function - sEnParity(). -*/ -#define sSetOddParity(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~EVEN_PAR; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetRTS -Purpose: Set the RTS output -Call: sSetRTS(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetRTS(ChP) \ -do { \ - if ((ChP)->rtsToggle) break; \ - (ChP)->TxControl[3] |= SET_RTS; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetRxTrigger -Purpose: Set the Rx FIFO trigger level -Call: sSetRxProcessor(ChP,Level) - CHANNEL_T *ChP; Ptr to channel structure - Byte_t Level; Number of characters in Rx FIFO at which the - interrupt will be generated. Can be any of the following flags: - - TRIG_NO: no trigger - TRIG_1: 1 character in FIFO - TRIG_1_2: FIFO 1/2 full - TRIG_7_8: FIFO 7/8 full -Comments: An interrupt will be generated when the trigger level is reached - only if function sEnInterrupt() has been called with flag - RXINT_EN set. The RXF_TRIG flag in the Interrupt Idenfification - register will be set whenever the trigger level is reached - regardless of the setting of RXINT_EN. - -*/ -#define sSetRxTrigger(ChP,LEVEL) \ -do { \ - (ChP)->RxControl[2] &= ~TRIG_MASK; \ - (ChP)->RxControl[2] |= LEVEL; \ - out32((ChP)->IndexAddr,(ChP)->RxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetStop1 -Purpose: Set stop bits to 1 -Call: sSetStop1(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetStop1(ChP) \ -do { \ - (ChP)->TxControl[2] &= ~STOP2; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetStop2 -Purpose: Set stop bits to 2 -Call: sSetStop2(ChP) - CHANNEL_T *ChP; Ptr to channel structure -*/ -#define sSetStop2(ChP) \ -do { \ - (ChP)->TxControl[2] |= STOP2; \ - out32((ChP)->IndexAddr,(ChP)->TxControl); \ -} while (0) - -/*************************************************************************** -Function: sSetTxXOFFChar -Purpose: Set the Tx XOFF flow control character -Call: sSetTxXOFFChar(ChP,Ch) - CHANNEL_T *ChP; Ptr to channel structure - Byte_t Ch; The value to set the Tx XOFF character to -*/ -#define sSetTxXOFFChar(ChP,CH) \ -do { \ - (ChP)->R[0x07] = (CH); \ - out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ -} while (0) - -/*************************************************************************** -Function: sSetTxXONChar -Purpose: Set the Tx XON flow control character -Call: sSetTxXONChar(ChP,Ch) - CHANNEL_T *ChP; Ptr to channel structure - Byte_t Ch; The value to set the Tx XON character to -*/ -#define sSetTxXONChar(ChP,CH) \ -do { \ - (ChP)->R[0x0b] = (CH); \ - out32((ChP)->IndexAddr,&(ChP)->R[0x08]); \ -} while (0) - -/*************************************************************************** -Function: sStartRxProcessor -Purpose: Start a channel's receive processor -Call: sStartRxProcessor(ChP) - CHANNEL_T *ChP; Ptr to channel structure -Comments: This function is used to start a Rx processor after it was - stopped with sStopRxProcessor() or sStopSWInFlowCtl(). It - will restart both the Rx processor and software input flow control. - -*/ -#define sStartRxProcessor(ChP) out32((ChP)->IndexAddr,&(ChP)->R[0]) - -/*************************************************************************** -Function: sWriteTxByte -Purpose: Write a transmit data byte to a channel. - ByteIO_t io: Channel transmit register I/O address. This can - be obtained with sGetTxRxDataIO(). - Byte_t Data; The transmit data byte. -Warnings: This function writes the data byte without checking to see if - sMaxTxSize is exceeded in the Tx FIFO. -*/ -#define sWriteTxByte(IO,DATA) sOutB(IO,DATA) - -/* - * Begin Linux specific definitions for the Rocketport driver - * - * This code is Copyright Theodore Ts'o, 1995-1997 - */ - -struct r_port { - int magic; - struct tty_port port; - int line; - int flags; /* Don't yet match the ASY_ flags!! */ - unsigned int board:3; - unsigned int aiop:2; - unsigned int chan:3; - CONTROLLER_t *ctlp; - CHANNEL_t channel; - int intmask; - int xmit_fifo_room; /* room in xmit fifo */ - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - int cd_status; - int ignore_status_mask; - int read_status_mask; - int cps; - - struct completion close_wait; /* Not yet matching the core */ - spinlock_t slock; - struct mutex write_mtx; -}; - -#define RPORT_MAGIC 0x525001 - -#define NUM_BOARDS 8 -#define MAX_RP_PORTS (32*NUM_BOARDS) - -/* - * The size of the xmit buffer is 1 page, or 4096 bytes - */ -#define XMIT_BUF_SIZE 4096 - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* - * Assigned major numbers for the Comtrol Rocketport - */ -#define TTY_ROCKET_MAJOR 46 -#define CUA_ROCKET_MAJOR 47 - -#ifdef PCI_VENDOR_ID_RP -#undef PCI_VENDOR_ID_RP -#undef PCI_DEVICE_ID_RP8OCTA -#undef PCI_DEVICE_ID_RP8INTF -#undef PCI_DEVICE_ID_RP16INTF -#undef PCI_DEVICE_ID_RP32INTF -#undef PCI_DEVICE_ID_URP8OCTA -#undef PCI_DEVICE_ID_URP8INTF -#undef PCI_DEVICE_ID_URP16INTF -#undef PCI_DEVICE_ID_CRP16INTF -#undef PCI_DEVICE_ID_URP32INTF -#endif - -/* Comtrol PCI Vendor ID */ -#define PCI_VENDOR_ID_RP 0x11fe - -/* Comtrol Device ID's */ -#define PCI_DEVICE_ID_RP32INTF 0x0001 /* Rocketport 32 port w/external I/F */ -#define PCI_DEVICE_ID_RP8INTF 0x0002 /* Rocketport 8 port w/external I/F */ -#define PCI_DEVICE_ID_RP16INTF 0x0003 /* Rocketport 16 port w/external I/F */ -#define PCI_DEVICE_ID_RP4QUAD 0x0004 /* Rocketport 4 port w/quad cable */ -#define PCI_DEVICE_ID_RP8OCTA 0x0005 /* Rocketport 8 port w/octa cable */ -#define PCI_DEVICE_ID_RP8J 0x0006 /* Rocketport 8 port w/RJ11 connectors */ -#define PCI_DEVICE_ID_RP4J 0x0007 /* Rocketport 4 port w/RJ11 connectors */ -#define PCI_DEVICE_ID_RP8SNI 0x0008 /* Rocketport 8 port w/ DB78 SNI (Siemens) connector */ -#define PCI_DEVICE_ID_RP16SNI 0x0009 /* Rocketport 16 port w/ DB78 SNI (Siemens) connector */ -#define PCI_DEVICE_ID_RPP4 0x000A /* Rocketport Plus 4 port */ -#define PCI_DEVICE_ID_RPP8 0x000B /* Rocketport Plus 8 port */ -#define PCI_DEVICE_ID_RP6M 0x000C /* RocketModem 6 port */ -#define PCI_DEVICE_ID_RP4M 0x000D /* RocketModem 4 port */ -#define PCI_DEVICE_ID_RP2_232 0x000E /* Rocketport Plus 2 port RS232 */ -#define PCI_DEVICE_ID_RP2_422 0x000F /* Rocketport Plus 2 port RS422 */ - -/* Universal PCI boards */ -#define PCI_DEVICE_ID_URP32INTF 0x0801 /* Rocketport UPCI 32 port w/external I/F */ -#define PCI_DEVICE_ID_URP8INTF 0x0802 /* Rocketport UPCI 8 port w/external I/F */ -#define PCI_DEVICE_ID_URP16INTF 0x0803 /* Rocketport UPCI 16 port w/external I/F */ -#define PCI_DEVICE_ID_URP8OCTA 0x0805 /* Rocketport UPCI 8 port w/octa cable */ -#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C /* Rocketmodem III 8 port */ -#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D /* Rocketmodem III 4 port */ - -/* Compact PCI device */ -#define PCI_DEVICE_ID_CRP16INTF 0x0903 /* Rocketport Compact PCI 16 port w/external I/F */ - diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c deleted file mode 100644 index 18888d005a0a..000000000000 --- a/drivers/char/synclink.c +++ /dev/null @@ -1,8119 +0,0 @@ -/* - * linux/drivers/char/synclink.c - * - * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $ - * - * Device driver for Microgate SyncLink ISA and PCI - * high speed multiprotocol serial adapters. - * - * written by Paul Fulghum for Microgate Corporation - * paulkf@microgate.com - * - * Microgate and SyncLink are trademarks of Microgate Corporation - * - * Derived from serial.c written by Theodore Ts'o and Linus Torvalds - * - * Original release 01/11/99 - * - * This code is released under the GNU General Public License (GPL) - * - * This driver is primarily intended for use in synchronous - * HDLC mode. Asynchronous mode is also provided. - * - * When operating in synchronous mode, each call to mgsl_write() - * contains exactly one complete HDLC frame. Calling mgsl_put_char - * will start assembling an HDLC frame that will not be sent until - * mgsl_flush_chars or mgsl_write is called. - * - * Synchronous receive data is reported as complete frames. To accomplish - * this, the TTY flip buffer is bypassed (too small to hold largest - * frame and may fragment frames) and the line discipline - * receive entry point is called directly. - * - * This driver has been tested with a slightly modified ppp.c driver - * for synchronous PPP. - * - * 2000/02/16 - * Added interface for syncppp.c driver (an alternate synchronous PPP - * implementation that also supports Cisco HDLC). Each device instance - * registers as a tty device AND a network device (if dosyncppp option - * is set for the device). The functionality is determined by which - * device interface is opened. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#if defined(__i386__) -# define BREAKPOINT() asm(" int $3"); -#else -# define BREAKPOINT() { } -#endif - -#define MAX_ISA_DEVICES 10 -#define MAX_PCI_DEVICES 10 -#define MAX_TOTAL_DEVICES 20 - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE)) -#define SYNCLINK_GENERIC_HDLC 1 -#else -#define SYNCLINK_GENERIC_HDLC 0 -#endif - -#define GET_USER(error,value,addr) error = get_user(value,addr) -#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 -#define PUT_USER(error,value,addr) error = put_user(value,addr) -#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 - -#include - -#define RCLRVALUE 0xffff - -static MGSL_PARAMS default_params = { - MGSL_MODE_HDLC, /* unsigned long mode */ - 0, /* unsigned char loopback; */ - HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ - HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ - 0, /* unsigned long clock_speed; */ - 0xff, /* unsigned char addr_filter; */ - HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ - HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ - HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ - 9600, /* unsigned long data_rate; */ - 8, /* unsigned char data_bits; */ - 1, /* unsigned char stop_bits; */ - ASYNC_PARITY_NONE /* unsigned char parity; */ -}; - -#define SHARED_MEM_ADDRESS_SIZE 0x40000 -#define BUFFERLISTSIZE 4096 -#define DMABUFFERSIZE 4096 -#define MAXRXFRAMES 7 - -typedef struct _DMABUFFERENTRY -{ - u32 phys_addr; /* 32-bit flat physical address of data buffer */ - volatile u16 count; /* buffer size/data count */ - volatile u16 status; /* Control/status field */ - volatile u16 rcc; /* character count field */ - u16 reserved; /* padding required by 16C32 */ - u32 link; /* 32-bit flat link to next buffer entry */ - char *virt_addr; /* virtual address of data buffer */ - u32 phys_entry; /* physical address of this buffer entry */ - dma_addr_t dma_addr; -} DMABUFFERENTRY, *DMAPBUFFERENTRY; - -/* The queue of BH actions to be performed */ - -#define BH_RECEIVE 1 -#define BH_TRANSMIT 2 -#define BH_STATUS 4 - -#define IO_PIN_SHUTDOWN_LIMIT 100 - -struct _input_signal_events { - int ri_up; - int ri_down; - int dsr_up; - int dsr_down; - int dcd_up; - int dcd_down; - int cts_up; - int cts_down; -}; - -/* transmit holding buffer definitions*/ -#define MAX_TX_HOLDING_BUFFERS 5 -struct tx_holding_buffer { - int buffer_size; - unsigned char * buffer; -}; - - -/* - * Device instance data structure - */ - -struct mgsl_struct { - int magic; - struct tty_port port; - int line; - int hw_version; - - struct mgsl_icount icount; - - int timeout; - int x_char; /* xon/xoff character */ - u16 read_status_mask; - u16 ignore_status_mask; - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - - wait_queue_head_t status_event_wait_q; - wait_queue_head_t event_wait_q; - struct timer_list tx_timer; /* HDLC transmit timeout timer */ - struct mgsl_struct *next_device; /* device list link */ - - spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */ - struct work_struct task; /* task structure for scheduling bh */ - - u32 EventMask; /* event trigger mask */ - u32 RecordedEvents; /* pending events */ - - u32 max_frame_size; /* as set by device config */ - - u32 pending_bh; - - bool bh_running; /* Protection from multiple */ - int isr_overflow; - bool bh_requested; - - int dcd_chkcount; /* check counts to prevent */ - int cts_chkcount; /* too many IRQs if a signal */ - int dsr_chkcount; /* is floating */ - int ri_chkcount; - - char *buffer_list; /* virtual address of Rx & Tx buffer lists */ - u32 buffer_list_phys; - dma_addr_t buffer_list_dma_addr; - - unsigned int rx_buffer_count; /* count of total allocated Rx buffers */ - DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */ - unsigned int current_rx_buffer; - - int num_tx_dma_buffers; /* number of tx dma frames required */ - int tx_dma_buffers_used; - unsigned int tx_buffer_count; /* count of total allocated Tx buffers */ - DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */ - int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */ - int current_tx_buffer; /* next tx dma buffer to be loaded */ - - unsigned char *intermediate_rxbuffer; - - int num_tx_holding_buffers; /* number of tx holding buffer allocated */ - int get_tx_holding_index; /* next tx holding buffer for adapter to load */ - int put_tx_holding_index; /* next tx holding buffer to store user request */ - int tx_holding_count; /* number of tx holding buffers waiting */ - struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS]; - - bool rx_enabled; - bool rx_overflow; - bool rx_rcc_underrun; - - bool tx_enabled; - bool tx_active; - u32 idle_mode; - - u16 cmr_value; - u16 tcsr_value; - - char device_name[25]; /* device instance name */ - - unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ - unsigned char bus; /* expansion bus number (zero based) */ - unsigned char function; /* PCI device number */ - - unsigned int io_base; /* base I/O address of adapter */ - unsigned int io_addr_size; /* size of the I/O address range */ - bool io_addr_requested; /* true if I/O address requested */ - - unsigned int irq_level; /* interrupt level */ - unsigned long irq_flags; - bool irq_requested; /* true if IRQ requested */ - - unsigned int dma_level; /* DMA channel */ - bool dma_requested; /* true if dma channel requested */ - - u16 mbre_bit; - u16 loopback_bits; - u16 usc_idle_mode; - - MGSL_PARAMS params; /* communications parameters */ - - unsigned char serial_signals; /* current serial signal states */ - - bool irq_occurred; /* for diagnostics use */ - unsigned int init_error; /* Initialization startup error (DIAGS) */ - int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */ - - u32 last_mem_alloc; - unsigned char* memory_base; /* shared memory address (PCI only) */ - u32 phys_memory_base; - bool shared_mem_requested; - - unsigned char* lcr_base; /* local config registers (PCI only) */ - u32 phys_lcr_base; - u32 lcr_offset; - bool lcr_mem_requested; - - u32 misc_ctrl_value; - char flag_buf[MAX_ASYNC_BUFFER_SIZE]; - char char_buf[MAX_ASYNC_BUFFER_SIZE]; - bool drop_rts_on_tx_done; - - bool loopmode_insert_requested; - bool loopmode_send_done_requested; - - struct _input_signal_events input_signal_events; - - /* generic HDLC device parts */ - int netcount; - spinlock_t netlock; - -#if SYNCLINK_GENERIC_HDLC - struct net_device *netdev; -#endif -}; - -#define MGSL_MAGIC 0x5401 - -/* - * The size of the serial xmit buffer is 1 page, or 4096 bytes - */ -#ifndef SERIAL_XMIT_SIZE -#define SERIAL_XMIT_SIZE 4096 -#endif - -/* - * These macros define the offsets used in calculating the - * I/O address of the specified USC registers. - */ - - -#define DCPIN 2 /* Bit 1 of I/O address */ -#define SDPIN 4 /* Bit 2 of I/O address */ - -#define DCAR 0 /* DMA command/address register */ -#define CCAR SDPIN /* channel command/address register */ -#define DATAREG DCPIN + SDPIN /* serial data register */ -#define MSBONLY 0x41 -#define LSBONLY 0x40 - -/* - * These macros define the register address (ordinal number) - * used for writing address/value pairs to the USC. - */ - -#define CMR 0x02 /* Channel mode Register */ -#define CCSR 0x04 /* Channel Command/status Register */ -#define CCR 0x06 /* Channel Control Register */ -#define PSR 0x08 /* Port status Register */ -#define PCR 0x0a /* Port Control Register */ -#define TMDR 0x0c /* Test mode Data Register */ -#define TMCR 0x0e /* Test mode Control Register */ -#define CMCR 0x10 /* Clock mode Control Register */ -#define HCR 0x12 /* Hardware Configuration Register */ -#define IVR 0x14 /* Interrupt Vector Register */ -#define IOCR 0x16 /* Input/Output Control Register */ -#define ICR 0x18 /* Interrupt Control Register */ -#define DCCR 0x1a /* Daisy Chain Control Register */ -#define MISR 0x1c /* Misc Interrupt status Register */ -#define SICR 0x1e /* status Interrupt Control Register */ -#define RDR 0x20 /* Receive Data Register */ -#define RMR 0x22 /* Receive mode Register */ -#define RCSR 0x24 /* Receive Command/status Register */ -#define RICR 0x26 /* Receive Interrupt Control Register */ -#define RSR 0x28 /* Receive Sync Register */ -#define RCLR 0x2a /* Receive count Limit Register */ -#define RCCR 0x2c /* Receive Character count Register */ -#define TC0R 0x2e /* Time Constant 0 Register */ -#define TDR 0x30 /* Transmit Data Register */ -#define TMR 0x32 /* Transmit mode Register */ -#define TCSR 0x34 /* Transmit Command/status Register */ -#define TICR 0x36 /* Transmit Interrupt Control Register */ -#define TSR 0x38 /* Transmit Sync Register */ -#define TCLR 0x3a /* Transmit count Limit Register */ -#define TCCR 0x3c /* Transmit Character count Register */ -#define TC1R 0x3e /* Time Constant 1 Register */ - - -/* - * MACRO DEFINITIONS FOR DMA REGISTERS - */ - -#define DCR 0x06 /* DMA Control Register (shared) */ -#define DACR 0x08 /* DMA Array count Register (shared) */ -#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */ -#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */ -#define DICR 0x18 /* DMA Interrupt Control Register (shared) */ -#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */ -#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */ - -#define TDMR 0x02 /* Transmit DMA mode Register */ -#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */ -#define TBCR 0x2a /* Transmit Byte count Register */ -#define TARL 0x2c /* Transmit Address Register (low) */ -#define TARU 0x2e /* Transmit Address Register (high) */ -#define NTBCR 0x3a /* Next Transmit Byte count Register */ -#define NTARL 0x3c /* Next Transmit Address Register (low) */ -#define NTARU 0x3e /* Next Transmit Address Register (high) */ - -#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */ -#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */ -#define RBCR 0xaa /* Receive Byte count Register */ -#define RARL 0xac /* Receive Address Register (low) */ -#define RARU 0xae /* Receive Address Register (high) */ -#define NRBCR 0xba /* Next Receive Byte count Register */ -#define NRARL 0xbc /* Next Receive Address Register (low) */ -#define NRARU 0xbe /* Next Receive Address Register (high) */ - - -/* - * MACRO DEFINITIONS FOR MODEM STATUS BITS - */ - -#define MODEMSTATUS_DTR 0x80 -#define MODEMSTATUS_DSR 0x40 -#define MODEMSTATUS_RTS 0x20 -#define MODEMSTATUS_CTS 0x10 -#define MODEMSTATUS_RI 0x04 -#define MODEMSTATUS_DCD 0x01 - - -/* - * Channel Command/Address Register (CCAR) Command Codes - */ - -#define RTCmd_Null 0x0000 -#define RTCmd_ResetHighestIus 0x1000 -#define RTCmd_TriggerChannelLoadDma 0x2000 -#define RTCmd_TriggerRxDma 0x2800 -#define RTCmd_TriggerTxDma 0x3000 -#define RTCmd_TriggerRxAndTxDma 0x3800 -#define RTCmd_PurgeRxFifo 0x4800 -#define RTCmd_PurgeTxFifo 0x5000 -#define RTCmd_PurgeRxAndTxFifo 0x5800 -#define RTCmd_LoadRcc 0x6800 -#define RTCmd_LoadTcc 0x7000 -#define RTCmd_LoadRccAndTcc 0x7800 -#define RTCmd_LoadTC0 0x8800 -#define RTCmd_LoadTC1 0x9000 -#define RTCmd_LoadTC0AndTC1 0x9800 -#define RTCmd_SerialDataLSBFirst 0xa000 -#define RTCmd_SerialDataMSBFirst 0xa800 -#define RTCmd_SelectBigEndian 0xb000 -#define RTCmd_SelectLittleEndian 0xb800 - - -/* - * DMA Command/Address Register (DCAR) Command Codes - */ - -#define DmaCmd_Null 0x0000 -#define DmaCmd_ResetTxChannel 0x1000 -#define DmaCmd_ResetRxChannel 0x1200 -#define DmaCmd_StartTxChannel 0x2000 -#define DmaCmd_StartRxChannel 0x2200 -#define DmaCmd_ContinueTxChannel 0x3000 -#define DmaCmd_ContinueRxChannel 0x3200 -#define DmaCmd_PauseTxChannel 0x4000 -#define DmaCmd_PauseRxChannel 0x4200 -#define DmaCmd_AbortTxChannel 0x5000 -#define DmaCmd_AbortRxChannel 0x5200 -#define DmaCmd_InitTxChannel 0x7000 -#define DmaCmd_InitRxChannel 0x7200 -#define DmaCmd_ResetHighestDmaIus 0x8000 -#define DmaCmd_ResetAllChannels 0x9000 -#define DmaCmd_StartAllChannels 0xa000 -#define DmaCmd_ContinueAllChannels 0xb000 -#define DmaCmd_PauseAllChannels 0xc000 -#define DmaCmd_AbortAllChannels 0xd000 -#define DmaCmd_InitAllChannels 0xf000 - -#define TCmd_Null 0x0000 -#define TCmd_ClearTxCRC 0x2000 -#define TCmd_SelectTicrTtsaData 0x4000 -#define TCmd_SelectTicrTxFifostatus 0x5000 -#define TCmd_SelectTicrIntLevel 0x6000 -#define TCmd_SelectTicrdma_level 0x7000 -#define TCmd_SendFrame 0x8000 -#define TCmd_SendAbort 0x9000 -#define TCmd_EnableDleInsertion 0xc000 -#define TCmd_DisableDleInsertion 0xd000 -#define TCmd_ClearEofEom 0xe000 -#define TCmd_SetEofEom 0xf000 - -#define RCmd_Null 0x0000 -#define RCmd_ClearRxCRC 0x2000 -#define RCmd_EnterHuntmode 0x3000 -#define RCmd_SelectRicrRtsaData 0x4000 -#define RCmd_SelectRicrRxFifostatus 0x5000 -#define RCmd_SelectRicrIntLevel 0x6000 -#define RCmd_SelectRicrdma_level 0x7000 - -/* - * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR) - */ - -#define RECEIVE_STATUS BIT5 -#define RECEIVE_DATA BIT4 -#define TRANSMIT_STATUS BIT3 -#define TRANSMIT_DATA BIT2 -#define IO_PIN BIT1 -#define MISC BIT0 - - -/* - * Receive status Bits in Receive Command/status Register RCSR - */ - -#define RXSTATUS_SHORT_FRAME BIT8 -#define RXSTATUS_CODE_VIOLATION BIT8 -#define RXSTATUS_EXITED_HUNT BIT7 -#define RXSTATUS_IDLE_RECEIVED BIT6 -#define RXSTATUS_BREAK_RECEIVED BIT5 -#define RXSTATUS_ABORT_RECEIVED BIT5 -#define RXSTATUS_RXBOUND BIT4 -#define RXSTATUS_CRC_ERROR BIT3 -#define RXSTATUS_FRAMING_ERROR BIT3 -#define RXSTATUS_ABORT BIT2 -#define RXSTATUS_PARITY_ERROR BIT2 -#define RXSTATUS_OVERRUN BIT1 -#define RXSTATUS_DATA_AVAILABLE BIT0 -#define RXSTATUS_ALL 0x01f6 -#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) ) - -/* - * Values for setting transmit idle mode in - * Transmit Control/status Register (TCSR) - */ -#define IDLEMODE_FLAGS 0x0000 -#define IDLEMODE_ALT_ONE_ZERO 0x0100 -#define IDLEMODE_ZERO 0x0200 -#define IDLEMODE_ONE 0x0300 -#define IDLEMODE_ALT_MARK_SPACE 0x0500 -#define IDLEMODE_SPACE 0x0600 -#define IDLEMODE_MARK 0x0700 -#define IDLEMODE_MASK 0x0700 - -/* - * IUSC revision identifiers - */ -#define IUSC_SL1660 0x4d44 -#define IUSC_PRE_SL1660 0x4553 - -/* - * Transmit status Bits in Transmit Command/status Register (TCSR) - */ - -#define TCSR_PRESERVE 0x0F00 - -#define TCSR_UNDERWAIT BIT11 -#define TXSTATUS_PREAMBLE_SENT BIT7 -#define TXSTATUS_IDLE_SENT BIT6 -#define TXSTATUS_ABORT_SENT BIT5 -#define TXSTATUS_EOF_SENT BIT4 -#define TXSTATUS_EOM_SENT BIT4 -#define TXSTATUS_CRC_SENT BIT3 -#define TXSTATUS_ALL_SENT BIT2 -#define TXSTATUS_UNDERRUN BIT1 -#define TXSTATUS_FIFO_EMPTY BIT0 -#define TXSTATUS_ALL 0x00fa -#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) ) - - -#define MISCSTATUS_RXC_LATCHED BIT15 -#define MISCSTATUS_RXC BIT14 -#define MISCSTATUS_TXC_LATCHED BIT13 -#define MISCSTATUS_TXC BIT12 -#define MISCSTATUS_RI_LATCHED BIT11 -#define MISCSTATUS_RI BIT10 -#define MISCSTATUS_DSR_LATCHED BIT9 -#define MISCSTATUS_DSR BIT8 -#define MISCSTATUS_DCD_LATCHED BIT7 -#define MISCSTATUS_DCD BIT6 -#define MISCSTATUS_CTS_LATCHED BIT5 -#define MISCSTATUS_CTS BIT4 -#define MISCSTATUS_RCC_UNDERRUN BIT3 -#define MISCSTATUS_DPLL_NO_SYNC BIT2 -#define MISCSTATUS_BRG1_ZERO BIT1 -#define MISCSTATUS_BRG0_ZERO BIT0 - -#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0)) -#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f)) - -#define SICR_RXC_ACTIVE BIT15 -#define SICR_RXC_INACTIVE BIT14 -#define SICR_RXC (BIT15+BIT14) -#define SICR_TXC_ACTIVE BIT13 -#define SICR_TXC_INACTIVE BIT12 -#define SICR_TXC (BIT13+BIT12) -#define SICR_RI_ACTIVE BIT11 -#define SICR_RI_INACTIVE BIT10 -#define SICR_RI (BIT11+BIT10) -#define SICR_DSR_ACTIVE BIT9 -#define SICR_DSR_INACTIVE BIT8 -#define SICR_DSR (BIT9+BIT8) -#define SICR_DCD_ACTIVE BIT7 -#define SICR_DCD_INACTIVE BIT6 -#define SICR_DCD (BIT7+BIT6) -#define SICR_CTS_ACTIVE BIT5 -#define SICR_CTS_INACTIVE BIT4 -#define SICR_CTS (BIT5+BIT4) -#define SICR_RCC_UNDERFLOW BIT3 -#define SICR_DPLL_NO_SYNC BIT2 -#define SICR_BRG1_ZERO BIT1 -#define SICR_BRG0_ZERO BIT0 - -void usc_DisableMasterIrqBit( struct mgsl_struct *info ); -void usc_EnableMasterIrqBit( struct mgsl_struct *info ); -void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask ); -void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask ); -void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask ); - -#define usc_EnableInterrupts( a, b ) \ - usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) ) - -#define usc_DisableInterrupts( a, b ) \ - usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) ) - -#define usc_EnableMasterIrqBit(a) \ - usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) ) - -#define usc_DisableMasterIrqBit(a) \ - usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) ) - -#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) ) - -/* - * Transmit status Bits in Transmit Control status Register (TCSR) - * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) - */ - -#define TXSTATUS_PREAMBLE_SENT BIT7 -#define TXSTATUS_IDLE_SENT BIT6 -#define TXSTATUS_ABORT_SENT BIT5 -#define TXSTATUS_EOF BIT4 -#define TXSTATUS_CRC_SENT BIT3 -#define TXSTATUS_ALL_SENT BIT2 -#define TXSTATUS_UNDERRUN BIT1 -#define TXSTATUS_FIFO_EMPTY BIT0 - -#define DICR_MASTER BIT15 -#define DICR_TRANSMIT BIT0 -#define DICR_RECEIVE BIT1 - -#define usc_EnableDmaInterrupts(a,b) \ - usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) ) - -#define usc_DisableDmaInterrupts(a,b) \ - usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) ) - -#define usc_EnableStatusIrqs(a,b) \ - usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) ) - -#define usc_DisablestatusIrqs(a,b) \ - usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) ) - -/* Transmit status Bits in Transmit Control status Register (TCSR) */ -/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */ - - -#define DISABLE_UNCONDITIONAL 0 -#define DISABLE_END_OF_FRAME 1 -#define ENABLE_UNCONDITIONAL 2 -#define ENABLE_AUTO_CTS 3 -#define ENABLE_AUTO_DCD 3 -#define usc_EnableTransmitter(a,b) \ - usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) ) -#define usc_EnableReceiver(a,b) \ - usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) ) - -static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port ); -static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value ); -static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ); - -static u16 usc_InReg( struct mgsl_struct *info, u16 Port ); -static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value ); -static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ); -void usc_RCmd( struct mgsl_struct *info, u16 Cmd ); -void usc_TCmd( struct mgsl_struct *info, u16 Cmd ); - -#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b))) -#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b)) - -#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1)) - -static void usc_process_rxoverrun_sync( struct mgsl_struct *info ); -static void usc_start_receiver( struct mgsl_struct *info ); -static void usc_stop_receiver( struct mgsl_struct *info ); - -static void usc_start_transmitter( struct mgsl_struct *info ); -static void usc_stop_transmitter( struct mgsl_struct *info ); -static void usc_set_txidle( struct mgsl_struct *info ); -static void usc_load_txfifo( struct mgsl_struct *info ); - -static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate ); -static void usc_enable_loopback( struct mgsl_struct *info, int enable ); - -static void usc_get_serial_signals( struct mgsl_struct *info ); -static void usc_set_serial_signals( struct mgsl_struct *info ); - -static void usc_reset( struct mgsl_struct *info ); - -static void usc_set_sync_mode( struct mgsl_struct *info ); -static void usc_set_sdlc_mode( struct mgsl_struct *info ); -static void usc_set_async_mode( struct mgsl_struct *info ); -static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate ); - -static void usc_loopback_frame( struct mgsl_struct *info ); - -static void mgsl_tx_timeout(unsigned long context); - - -static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ); -static void usc_loopmode_insert_request( struct mgsl_struct * info ); -static int usc_loopmode_active( struct mgsl_struct * info); -static void usc_loopmode_send_done( struct mgsl_struct * info ); - -static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg); - -#if SYNCLINK_GENERIC_HDLC -#define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(struct mgsl_struct *info); -static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size); -static int hdlcdev_init(struct mgsl_struct *info); -static void hdlcdev_exit(struct mgsl_struct *info); -#endif - -/* - * Defines a BUS descriptor value for the PCI adapter - * local bus address ranges. - */ - -#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \ -(0x00400020 + \ -((WrHold) << 30) + \ -((WrDly) << 28) + \ -((RdDly) << 26) + \ -((Nwdd) << 20) + \ -((Nwad) << 15) + \ -((Nxda) << 13) + \ -((Nrdd) << 11) + \ -((Nrad) << 6) ) - -static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit); - -/* - * Adapter diagnostic routines - */ -static bool mgsl_register_test( struct mgsl_struct *info ); -static bool mgsl_irq_test( struct mgsl_struct *info ); -static bool mgsl_dma_test( struct mgsl_struct *info ); -static bool mgsl_memory_test( struct mgsl_struct *info ); -static int mgsl_adapter_test( struct mgsl_struct *info ); - -/* - * device and resource management routines - */ -static int mgsl_claim_resources(struct mgsl_struct *info); -static void mgsl_release_resources(struct mgsl_struct *info); -static void mgsl_add_device(struct mgsl_struct *info); -static struct mgsl_struct* mgsl_allocate_device(void); - -/* - * DMA buffer manupulation functions. - */ -static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ); -static bool mgsl_get_rx_frame( struct mgsl_struct *info ); -static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info ); -static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ); -static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ); -static int num_free_tx_dma_buffers(struct mgsl_struct *info); -static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize); -static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count); - -/* - * DMA and Shared Memory buffer allocation and formatting - */ -static int mgsl_allocate_dma_buffers(struct mgsl_struct *info); -static void mgsl_free_dma_buffers(struct mgsl_struct *info); -static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); -static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); -static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info); -static void mgsl_free_buffer_list_memory(struct mgsl_struct *info); -static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info); -static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info); -static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info); -static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info); -static bool load_next_tx_holding_buffer(struct mgsl_struct *info); -static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize); - -/* - * Bottom half interrupt handlers - */ -static void mgsl_bh_handler(struct work_struct *work); -static void mgsl_bh_receive(struct mgsl_struct *info); -static void mgsl_bh_transmit(struct mgsl_struct *info); -static void mgsl_bh_status(struct mgsl_struct *info); - -/* - * Interrupt handler routines and dispatch table. - */ -static void mgsl_isr_null( struct mgsl_struct *info ); -static void mgsl_isr_transmit_data( struct mgsl_struct *info ); -static void mgsl_isr_receive_data( struct mgsl_struct *info ); -static void mgsl_isr_receive_status( struct mgsl_struct *info ); -static void mgsl_isr_transmit_status( struct mgsl_struct *info ); -static void mgsl_isr_io_pin( struct mgsl_struct *info ); -static void mgsl_isr_misc( struct mgsl_struct *info ); -static void mgsl_isr_receive_dma( struct mgsl_struct *info ); -static void mgsl_isr_transmit_dma( struct mgsl_struct *info ); - -typedef void (*isr_dispatch_func)(struct mgsl_struct *); - -static isr_dispatch_func UscIsrTable[7] = -{ - mgsl_isr_null, - mgsl_isr_misc, - mgsl_isr_io_pin, - mgsl_isr_transmit_data, - mgsl_isr_transmit_status, - mgsl_isr_receive_data, - mgsl_isr_receive_status -}; - -/* - * ioctl call handlers - */ -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount - __user *user_icount); -static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params); -static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params); -static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode); -static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode); -static int mgsl_txenable(struct mgsl_struct * info, int enable); -static int mgsl_txabort(struct mgsl_struct * info); -static int mgsl_rxenable(struct mgsl_struct * info, int enable); -static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask); -static int mgsl_loopmode_send_done( struct mgsl_struct * info ); - -/* set non-zero on successful registration with PCI subsystem */ -static bool pci_registered; - -/* - * Global linked list of SyncLink devices - */ -static struct mgsl_struct *mgsl_device_list; -static int mgsl_device_count; - -/* - * Set this param to non-zero to load eax with the - * .text section address and breakpoint on module load. - * This is useful for use with gdb and add-symbol-file command. - */ -static int break_on_load; - -/* - * Driver major number, defaults to zero to get auto - * assigned major number. May be forced as module parameter. - */ -static int ttymajor; - -/* - * Array of user specified options for ISA adapters. - */ -static int io[MAX_ISA_DEVICES]; -static int irq[MAX_ISA_DEVICES]; -static int dma[MAX_ISA_DEVICES]; -static int debug_level; -static int maxframe[MAX_TOTAL_DEVICES]; -static int txdmabufs[MAX_TOTAL_DEVICES]; -static int txholdbufs[MAX_TOTAL_DEVICES]; - -module_param(break_on_load, bool, 0); -module_param(ttymajor, int, 0); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(dma, int, NULL, 0); -module_param(debug_level, int, 0); -module_param_array(maxframe, int, NULL, 0); -module_param_array(txdmabufs, int, NULL, 0); -module_param_array(txholdbufs, int, NULL, 0); - -static char *driver_name = "SyncLink serial driver"; -static char *driver_version = "$Revision: 4.38 $"; - -static int synclink_init_one (struct pci_dev *dev, - const struct pci_device_id *ent); -static void synclink_remove_one (struct pci_dev *dev); - -static struct pci_device_id synclink_pci_tbl[] = { - { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, }, - { 0, }, /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, synclink_pci_tbl); - -MODULE_LICENSE("GPL"); - -static struct pci_driver synclink_pci_driver = { - .name = "synclink", - .id_table = synclink_pci_tbl, - .probe = synclink_init_one, - .remove = __devexit_p(synclink_remove_one), -}; - -static struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - - -static void mgsl_change_params(struct mgsl_struct *info); -static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout); - -/* - * 1st function defined in .text section. Calling this function in - * init_module() followed by a breakpoint allows a remote debugger - * (gdb) to get the .text address for the add-symbol-file command. - * This allows remote debugging of dynamically loadable modules. - */ -static void* mgsl_get_text_ptr(void) -{ - return mgsl_get_text_ptr; -} - -static inline int mgsl_paranoia_check(struct mgsl_struct *info, - char *name, const char *routine) -{ -#ifdef MGSL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for mgsl struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null mgsl_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != MGSL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#else - if (!info) - return 1; -#endif - return 0; -} - -/** - * line discipline callback wrappers - * - * The wrappers maintain line discipline references - * while calling into the line discipline. - * - * ldisc_receive_buf - pass receive data to line discipline - */ - -static void ldisc_receive_buf(struct tty_struct *tty, - const __u8 *data, char *flags, int count) -{ - struct tty_ldisc *ld; - if (!tty) - return; - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->receive_buf) - ld->ops->receive_buf(tty, data, flags, count); - tty_ldisc_deref(ld); - } -} - -/* mgsl_stop() throttle (stop) transmitter - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_stop(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (mgsl_paranoia_check(info, tty->name, "mgsl_stop")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("mgsl_stop(%s)\n",info->device_name); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (info->tx_enabled) - usc_stop_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - -} /* end of mgsl_stop() */ - -/* mgsl_start() release (start) transmitter - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_start(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (mgsl_paranoia_check(info, tty->name, "mgsl_start")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("mgsl_start(%s)\n",info->device_name); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!info->tx_enabled) - usc_start_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - -} /* end of mgsl_start() */ - -/* - * Bottom half work queue access functions - */ - -/* mgsl_bh_action() Return next bottom half action to perform. - * Return Value: BH action code or 0 if nothing to do. - */ -static int mgsl_bh_action(struct mgsl_struct *info) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&info->irq_spinlock,flags); - - if (info->pending_bh & BH_RECEIVE) { - info->pending_bh &= ~BH_RECEIVE; - rc = BH_RECEIVE; - } else if (info->pending_bh & BH_TRANSMIT) { - info->pending_bh &= ~BH_TRANSMIT; - rc = BH_TRANSMIT; - } else if (info->pending_bh & BH_STATUS) { - info->pending_bh &= ~BH_STATUS; - rc = BH_STATUS; - } - - if (!rc) { - /* Mark BH routine as complete */ - info->bh_running = false; - info->bh_requested = false; - } - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return rc; -} - -/* - * Perform bottom half processing of work items queued by ISR. - */ -static void mgsl_bh_handler(struct work_struct *work) -{ - struct mgsl_struct *info = - container_of(work, struct mgsl_struct, task); - int action; - - if (!info) - return; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_handler(%s) entry\n", - __FILE__,__LINE__,info->device_name); - - info->bh_running = true; - - while((action = mgsl_bh_action(info)) != 0) { - - /* Process work item */ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_handler() work item action=%d\n", - __FILE__,__LINE__,action); - - switch (action) { - - case BH_RECEIVE: - mgsl_bh_receive(info); - break; - case BH_TRANSMIT: - mgsl_bh_transmit(info); - break; - case BH_STATUS: - mgsl_bh_status(info); - break; - default: - /* unknown work item ID */ - printk("Unknown work item ID=%08X!\n", action); - break; - } - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_handler(%s) exit\n", - __FILE__,__LINE__,info->device_name); -} - -static void mgsl_bh_receive(struct mgsl_struct *info) -{ - bool (*get_rx_frame)(struct mgsl_struct *info) = - (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame); - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_receive(%s)\n", - __FILE__,__LINE__,info->device_name); - - do - { - if (info->rx_rcc_underrun) { - unsigned long flags; - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_start_receiver(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return; - } - } while(get_rx_frame(info)); -} - -static void mgsl_bh_transmit(struct mgsl_struct *info) -{ - struct tty_struct *tty = info->port.tty; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_transmit() entry on %s\n", - __FILE__,__LINE__,info->device_name); - - if (tty) - tty_wakeup(tty); - - /* if transmitter idle and loopmode_send_done_requested - * then start echoing RxD to TxD - */ - spin_lock_irqsave(&info->irq_spinlock,flags); - if ( !info->tx_active && info->loopmode_send_done_requested ) - usc_loopmode_send_done( info ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); -} - -static void mgsl_bh_status(struct mgsl_struct *info) -{ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_status() entry on %s\n", - __FILE__,__LINE__,info->device_name); - - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - info->dcd_chkcount = 0; - info->cts_chkcount = 0; -} - -/* mgsl_isr_receive_status() - * - * Service a receive status interrupt. The type of status - * interrupt is indicated by the state of the RCSR. - * This is only used for HDLC mode. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_receive_status( struct mgsl_struct *info ) -{ - u16 status = usc_InReg( info, RCSR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_receive_status status=%04X\n", - __FILE__,__LINE__,status); - - if ( (status & RXSTATUS_ABORT_RECEIVED) && - info->loopmode_insert_requested && - usc_loopmode_active(info) ) - { - ++info->icount.rxabort; - info->loopmode_insert_requested = false; - - /* clear CMR:13 to start echoing RxD to TxD */ - info->cmr_value &= ~BIT13; - usc_OutReg(info, CMR, info->cmr_value); - - /* disable received abort irq (no longer required) */ - usc_OutReg(info, RICR, - (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED)); - } - - if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) { - if (status & RXSTATUS_EXITED_HUNT) - info->icount.exithunt++; - if (status & RXSTATUS_IDLE_RECEIVED) - info->icount.rxidle++; - wake_up_interruptible(&info->event_wait_q); - } - - if (status & RXSTATUS_OVERRUN){ - info->icount.rxover++; - usc_process_rxoverrun_sync( info ); - } - - usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); - usc_UnlatchRxstatusBits( info, status ); - -} /* end of mgsl_isr_receive_status() */ - -/* mgsl_isr_transmit_status() - * - * Service a transmit status interrupt - * HDLC mode :end of transmit frame - * Async mode:all data is sent - * transmit status is indicated by bits in the TCSR. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_transmit_status( struct mgsl_struct *info ) -{ - u16 status = usc_InReg( info, TCSR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_transmit_status status=%04X\n", - __FILE__,__LINE__,status); - - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); - usc_UnlatchTxstatusBits( info, status ); - - if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) ) - { - /* finished sending HDLC abort. This may leave */ - /* the TxFifo with data from the aborted frame */ - /* so purge the TxFifo. Also shutdown the DMA */ - /* channel in case there is data remaining in */ - /* the DMA buffer */ - usc_DmaCmd( info, DmaCmd_ResetTxChannel ); - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - } - - if ( status & TXSTATUS_EOF_SENT ) - info->icount.txok++; - else if ( status & TXSTATUS_UNDERRUN ) - info->icount.txunder++; - else if ( status & TXSTATUS_ABORT_SENT ) - info->icount.txabort++; - else - info->icount.txunder++; - - info->tx_active = false; - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - del_timer(&info->tx_timer); - - if ( info->drop_rts_on_tx_done ) { - usc_get_serial_signals( info ); - if ( info->serial_signals & SerialSignal_RTS ) { - info->serial_signals &= ~SerialSignal_RTS; - usc_set_serial_signals( info ); - } - info->drop_rts_on_tx_done = false; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - if (info->port.tty->stopped || info->port.tty->hw_stopped) { - usc_stop_transmitter(info); - return; - } - info->pending_bh |= BH_TRANSMIT; - } - -} /* end of mgsl_isr_transmit_status() */ - -/* mgsl_isr_io_pin() - * - * Service an Input/Output pin interrupt. The type of - * interrupt is indicated by bits in the MISR - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_io_pin( struct mgsl_struct *info ) -{ - struct mgsl_icount *icount; - u16 status = usc_InReg( info, MISR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_io_pin status=%04X\n", - __FILE__,__LINE__,status); - - usc_ClearIrqPendingBits( info, IO_PIN ); - usc_UnlatchIostatusBits( info, status ); - - if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | - MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { - icount = &info->icount; - /* update input line counters */ - if (status & MISCSTATUS_RI_LATCHED) { - if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - usc_DisablestatusIrqs(info,SICR_RI); - icount->rng++; - if ( status & MISCSTATUS_RI ) - info->input_signal_events.ri_up++; - else - info->input_signal_events.ri_down++; - } - if (status & MISCSTATUS_DSR_LATCHED) { - if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - usc_DisablestatusIrqs(info,SICR_DSR); - icount->dsr++; - if ( status & MISCSTATUS_DSR ) - info->input_signal_events.dsr_up++; - else - info->input_signal_events.dsr_down++; - } - if (status & MISCSTATUS_DCD_LATCHED) { - if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - usc_DisablestatusIrqs(info,SICR_DCD); - icount->dcd++; - if (status & MISCSTATUS_DCD) { - info->input_signal_events.dcd_up++; - } else - info->input_signal_events.dcd_down++; -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) { - if (status & MISCSTATUS_DCD) - netif_carrier_on(info->netdev); - else - netif_carrier_off(info->netdev); - } -#endif - } - if (status & MISCSTATUS_CTS_LATCHED) - { - if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - usc_DisablestatusIrqs(info,SICR_CTS); - icount->cts++; - if ( status & MISCSTATUS_CTS ) - info->input_signal_events.cts_up++; - else - info->input_signal_events.cts_down++; - } - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - if ( (info->port.flags & ASYNC_CHECK_CD) && - (status & MISCSTATUS_DCD_LATCHED) ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s CD now %s...", info->device_name, - (status & MISCSTATUS_DCD) ? "on" : "off"); - if (status & MISCSTATUS_DCD) - wake_up_interruptible(&info->port.open_wait); - else { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("doing serial hangup..."); - if (info->port.tty) - tty_hangup(info->port.tty); - } - } - - if ( (info->port.flags & ASYNC_CTS_FLOW) && - (status & MISCSTATUS_CTS_LATCHED) ) { - if (info->port.tty->hw_stopped) { - if (status & MISCSTATUS_CTS) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx start..."); - if (info->port.tty) - info->port.tty->hw_stopped = 0; - usc_start_transmitter(info); - info->pending_bh |= BH_TRANSMIT; - return; - } - } else { - if (!(status & MISCSTATUS_CTS)) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx stop..."); - if (info->port.tty) - info->port.tty->hw_stopped = 1; - usc_stop_transmitter(info); - } - } - } - } - - info->pending_bh |= BH_STATUS; - - /* for diagnostics set IRQ flag */ - if ( status & MISCSTATUS_TXC_LATCHED ){ - usc_OutReg( info, SICR, - (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) ); - usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED ); - info->irq_occurred = true; - } - -} /* end of mgsl_isr_io_pin() */ - -/* mgsl_isr_transmit_data() - * - * Service a transmit data interrupt (async mode only). - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_transmit_data( struct mgsl_struct *info ) -{ - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n", - __FILE__,__LINE__,info->xmit_cnt); - - usc_ClearIrqPendingBits( info, TRANSMIT_DATA ); - - if (info->port.tty->stopped || info->port.tty->hw_stopped) { - usc_stop_transmitter(info); - return; - } - - if ( info->xmit_cnt ) - usc_load_txfifo( info ); - else - info->tx_active = false; - - if (info->xmit_cnt < WAKEUP_CHARS) - info->pending_bh |= BH_TRANSMIT; - -} /* end of mgsl_isr_transmit_data() */ - -/* mgsl_isr_receive_data() - * - * Service a receive data interrupt. This occurs - * when operating in asynchronous interrupt transfer mode. - * The receive data FIFO is flushed to the receive data buffers. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_receive_data( struct mgsl_struct *info ) -{ - int Fifocount; - u16 status; - int work = 0; - unsigned char DataByte; - struct tty_struct *tty = info->port.tty; - struct mgsl_icount *icount = &info->icount; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_receive_data\n", - __FILE__,__LINE__); - - usc_ClearIrqPendingBits( info, RECEIVE_DATA ); - - /* select FIFO status for RICR readback */ - usc_RCmd( info, RCmd_SelectRicrRxFifostatus ); - - /* clear the Wordstatus bit so that status readback */ - /* only reflects the status of this byte */ - usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 )); - - /* flush the receive FIFO */ - - while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) { - int flag; - - /* read one byte from RxFIFO */ - outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY), - info->io_base + CCAR ); - DataByte = inb( info->io_base + CCAR ); - - /* get the status of the received byte */ - status = usc_InReg(info, RCSR); - if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR + - RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) - usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); - - icount->rx++; - - flag = 0; - if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR + - RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) { - printk("rxerr=%04X\n",status); - /* update error statistics */ - if ( status & RXSTATUS_BREAK_RECEIVED ) { - status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR); - icount->brk++; - } else if (status & RXSTATUS_PARITY_ERROR) - icount->parity++; - else if (status & RXSTATUS_FRAMING_ERROR) - icount->frame++; - else if (status & RXSTATUS_OVERRUN) { - /* must issue purge fifo cmd before */ - /* 16C32 accepts more receive chars */ - usc_RTCmd(info,RTCmd_PurgeRxFifo); - icount->overrun++; - } - - /* discard char if tty control flags say so */ - if (status & info->ignore_status_mask) - continue; - - status &= info->read_status_mask; - - if (status & RXSTATUS_BREAK_RECEIVED) { - flag = TTY_BREAK; - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } else if (status & RXSTATUS_PARITY_ERROR) - flag = TTY_PARITY; - else if (status & RXSTATUS_FRAMING_ERROR) - flag = TTY_FRAME; - } /* end of if (error) */ - tty_insert_flip_char(tty, DataByte, flag); - if (status & RXSTATUS_OVERRUN) { - /* Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - work += tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - } - - if ( debug_level >= DEBUG_LEVEL_ISR ) { - printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", - __FILE__,__LINE__,icount->rx,icount->brk, - icount->parity,icount->frame,icount->overrun); - } - - if(work) - tty_flip_buffer_push(tty); -} - -/* mgsl_isr_misc() - * - * Service a miscellaneous interrupt source. - * - * Arguments: info pointer to device extension (instance data) - * Return Value: None - */ -static void mgsl_isr_misc( struct mgsl_struct *info ) -{ - u16 status = usc_InReg( info, MISR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_misc status=%04X\n", - __FILE__,__LINE__,status); - - if ((status & MISCSTATUS_RCC_UNDERRUN) && - (info->params.mode == MGSL_MODE_HDLC)) { - - /* turn off receiver and rx DMA */ - usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); - usc_DmaCmd(info, DmaCmd_ResetRxChannel); - usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); - usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS); - usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS); - - /* schedule BH handler to restart receiver */ - info->pending_bh |= BH_RECEIVE; - info->rx_rcc_underrun = true; - } - - usc_ClearIrqPendingBits( info, MISC ); - usc_UnlatchMiscstatusBits( info, status ); - -} /* end of mgsl_isr_misc() */ - -/* mgsl_isr_null() - * - * Services undefined interrupt vectors from the - * USC. (hence this function SHOULD never be called) - * - * Arguments: info pointer to device extension (instance data) - * Return Value: None - */ -static void mgsl_isr_null( struct mgsl_struct *info ) -{ - -} /* end of mgsl_isr_null() */ - -/* mgsl_isr_receive_dma() - * - * Service a receive DMA channel interrupt. - * For this driver there are two sources of receive DMA interrupts - * as identified in the Receive DMA mode Register (RDMR): - * - * BIT3 EOA/EOL End of List, all receive buffers in receive - * buffer list have been filled (no more free buffers - * available). The DMA controller has shut down. - * - * BIT2 EOB End of Buffer. This interrupt occurs when a receive - * DMA buffer is terminated in response to completion - * of a good frame or a frame with errors. The status - * of the frame is stored in the buffer entry in the - * list of receive buffer entries. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_receive_dma( struct mgsl_struct *info ) -{ - u16 status; - - /* clear interrupt pending and IUS bit for Rx DMA IRQ */ - usc_OutDmaReg( info, CDIR, BIT9+BIT1 ); - - /* Read the receive DMA status to identify interrupt type. */ - /* This also clears the status bits. */ - status = usc_InDmaReg( info, RDMR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n", - __FILE__,__LINE__,info->device_name,status); - - info->pending_bh |= BH_RECEIVE; - - if ( status & BIT3 ) { - info->rx_overflow = true; - info->icount.buf_overrun++; - } - -} /* end of mgsl_isr_receive_dma() */ - -/* mgsl_isr_transmit_dma() - * - * This function services a transmit DMA channel interrupt. - * - * For this driver there is one source of transmit DMA interrupts - * as identified in the Transmit DMA Mode Register (TDMR): - * - * BIT2 EOB End of Buffer. This interrupt occurs when a - * transmit DMA buffer has been emptied. - * - * The driver maintains enough transmit DMA buffers to hold at least - * one max frame size transmit frame. When operating in a buffered - * transmit mode, there may be enough transmit DMA buffers to hold at - * least two or more max frame size frames. On an EOB condition, - * determine if there are any queued transmit buffers and copy into - * transmit DMA buffers if we have room. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_transmit_dma( struct mgsl_struct *info ) -{ - u16 status; - - /* clear interrupt pending and IUS bit for Tx DMA IRQ */ - usc_OutDmaReg(info, CDIR, BIT8+BIT0 ); - - /* Read the transmit DMA status to identify interrupt type. */ - /* This also clears the status bits. */ - - status = usc_InDmaReg( info, TDMR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n", - __FILE__,__LINE__,info->device_name,status); - - if ( status & BIT2 ) { - --info->tx_dma_buffers_used; - - /* if there are transmit frames queued, - * try to load the next one - */ - if ( load_next_tx_holding_buffer(info) ) { - /* if call returns non-zero value, we have - * at least one free tx holding buffer - */ - info->pending_bh |= BH_TRANSMIT; - } - } - -} /* end of mgsl_isr_transmit_dma() */ - -/* mgsl_interrupt() - * - * Interrupt service routine entry point. - * - * Arguments: - * - * irq interrupt number that caused interrupt - * dev_id device ID supplied during interrupt registration - * - * Return Value: None - */ -static irqreturn_t mgsl_interrupt(int dummy, void *dev_id) -{ - struct mgsl_struct *info = dev_id; - u16 UscVector; - u16 DmaVector; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n", - __FILE__, __LINE__, info->irq_level); - - spin_lock(&info->irq_spinlock); - - for(;;) { - /* Read the interrupt vectors from hardware. */ - UscVector = usc_InReg(info, IVR) >> 9; - DmaVector = usc_InDmaReg(info, DIVR); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n", - __FILE__,__LINE__,info->device_name,UscVector,DmaVector); - - if ( !UscVector && !DmaVector ) - break; - - /* Dispatch interrupt vector */ - if ( UscVector ) - (*UscIsrTable[UscVector])(info); - else if ( (DmaVector&(BIT10|BIT9)) == BIT10) - mgsl_isr_transmit_dma(info); - else - mgsl_isr_receive_dma(info); - - if ( info->isr_overflow ) { - printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n", - __FILE__, __LINE__, info->device_name, info->irq_level); - usc_DisableMasterIrqBit(info); - usc_DisableDmaInterrupts(info,DICR_MASTER); - break; - } - } - - /* Request bottom half processing if there's something - * for it to do and the bh is not already running - */ - - if ( info->pending_bh && !info->bh_running && !info->bh_requested ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s queueing bh task.\n", - __FILE__,__LINE__,info->device_name); - schedule_work(&info->task); - info->bh_requested = true; - } - - spin_unlock(&info->irq_spinlock); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n", - __FILE__, __LINE__, info->irq_level); - - return IRQ_HANDLED; -} /* end of mgsl_interrupt() */ - -/* startup() - * - * Initialize and start device. - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise error code - */ -static int startup(struct mgsl_struct * info) -{ - int retval = 0; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name); - - if (info->port.flags & ASYNC_INITIALIZED) - return 0; - - if (!info->xmit_buf) { - /* allocate a page of memory for a transmit buffer */ - info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); - if (!info->xmit_buf) { - printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", - __FILE__,__LINE__,info->device_name); - return -ENOMEM; - } - } - - info->pending_bh = 0; - - memset(&info->icount, 0, sizeof(info->icount)); - - setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info); - - /* Allocate and claim adapter resources */ - retval = mgsl_claim_resources(info); - - /* perform existence check and diagnostics */ - if ( !retval ) - retval = mgsl_adapter_test(info); - - if ( retval ) { - if (capable(CAP_SYS_ADMIN) && info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - mgsl_release_resources(info); - return retval; - } - - /* program hardware for current parameters */ - mgsl_change_params(info); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags |= ASYNC_INITIALIZED; - - return 0; - -} /* end of startup() */ - -/* shutdown() - * - * Called by mgsl_close() and mgsl_hangup() to shutdown hardware - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void shutdown(struct mgsl_struct * info) -{ - unsigned long flags; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_shutdown(%s)\n", - __FILE__,__LINE__, info->device_name ); - - /* clear status wait queue because status changes */ - /* can't happen after shutting down the hardware */ - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - del_timer_sync(&info->tx_timer); - - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_DisableMasterIrqBit(info); - usc_stop_receiver(info); - usc_stop_transmitter(info); - usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS + - TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC ); - usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE); - - /* Disable DMAEN (Port 7, Bit 14) */ - /* This disconnects the DMA request signal from the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14)); - - /* Disable INTEN (Port 6, Bit12) */ - /* This disconnects the IRQ request signal to the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12)); - - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { - info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - usc_set_serial_signals(info); - } - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - mgsl_release_resources(info); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; - -} /* end of shutdown() */ - -static void mgsl_program_hw(struct mgsl_struct *info) -{ - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - - usc_stop_receiver(info); - usc_stop_transmitter(info); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - if (info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW || - info->netcount) - usc_set_sync_mode(info); - else - usc_set_async_mode(info); - - usc_set_serial_signals(info); - - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - - usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI); - usc_EnableInterrupts(info, IO_PIN); - usc_get_serial_signals(info); - - if (info->netcount || info->port.tty->termios->c_cflag & CREAD) - usc_start_receiver(info); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); -} - -/* Reconfigure adapter based on new parameters - */ -static void mgsl_change_params(struct mgsl_struct *info) -{ - unsigned cflag; - int bits_per_char; - - if (!info->port.tty || !info->port.tty->termios) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_change_params(%s)\n", - __FILE__,__LINE__, info->device_name ); - - cflag = info->port.tty->termios->c_cflag; - - /* if B0 rate (hangup) specified then negate DTR and RTS */ - /* otherwise assert DTR and RTS */ - if (cflag & CBAUD) - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - - /* byte size and parity */ - - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: info->params.data_bits = 7; break; - } - - if (cflag & CSTOPB) - info->params.stop_bits = 2; - else - info->params.stop_bits = 1; - - info->params.parity = ASYNC_PARITY_NONE; - if (cflag & PARENB) { - if (cflag & PARODD) - info->params.parity = ASYNC_PARITY_ODD; - else - info->params.parity = ASYNC_PARITY_EVEN; -#ifdef CMSPAR - if (cflag & CMSPAR) - info->params.parity = ASYNC_PARITY_SPACE; -#endif - } - - /* calculate number of jiffies to transmit a full - * FIFO (32 bytes) at specified data rate - */ - bits_per_char = info->params.data_bits + - info->params.stop_bits + 1; - - /* if port data rate is set to 460800 or less then - * allow tty settings to override, otherwise keep the - * current data rate. - */ - if (info->params.data_rate <= 460800) - info->params.data_rate = tty_get_baud_rate(info->port.tty); - - if ( info->params.data_rate ) { - info->timeout = (32*HZ*bits_per_char) / - info->params.data_rate; - } - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - if (cflag & CRTSCTS) - info->port.flags |= ASYNC_CTS_FLOW; - else - info->port.flags &= ~ASYNC_CTS_FLOW; - - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - /* process tty input control flags */ - - info->read_status_mask = RXSTATUS_OVERRUN; - if (I_INPCK(info->port.tty)) - info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= RXSTATUS_BREAK_RECEIVED; - - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED; - /* If ignoring parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= RXSTATUS_OVERRUN; - } - - mgsl_program_hw(info); - -} /* end of mgsl_change_params() */ - -/* mgsl_put_char() - * - * Add a character to the transmit buffer. - * - * Arguments: tty pointer to tty information structure - * ch character to add to transmit buffer - * - * Return Value: None - */ -static int mgsl_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if (debug_level >= DEBUG_LEVEL_INFO) { - printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n", - __FILE__, __LINE__, ch, info->device_name); - } - - if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char")) - return 0; - - if (!info->xmit_buf) - return 0; - - spin_lock_irqsave(&info->irq_spinlock, flags); - - if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) { - if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) { - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE-1; - info->xmit_cnt++; - ret = 1; - } - } - spin_unlock_irqrestore(&info->irq_spinlock, flags); - return ret; - -} /* end of mgsl_put_char() */ - -/* mgsl_flush_chars() - * - * Enable transmitter so remaining characters in the - * transmit buffer are sent. - * - * Arguments: tty pointer to tty information structure - * Return Value: None - */ -static void mgsl_flush_chars(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n", - __FILE__,__LINE__,info->device_name,info->xmit_cnt); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars")) - return; - - if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !info->xmit_buf) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n", - __FILE__,__LINE__,info->device_name ); - - spin_lock_irqsave(&info->irq_spinlock,flags); - - if (!info->tx_active) { - if ( (info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) { - /* operating in synchronous (frame oriented) mode */ - /* copy data from circular xmit_buf to */ - /* transmit DMA buffer. */ - mgsl_load_tx_dma_buffer(info, - info->xmit_buf,info->xmit_cnt); - } - usc_start_transmitter(info); - } - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - -} /* end of mgsl_flush_chars() */ - -/* mgsl_write() - * - * Send a block of data - * - * Arguments: - * - * tty pointer to tty information structure - * buf pointer to buffer containing send data - * count size of send data in bytes - * - * Return Value: number of characters written - */ -static int mgsl_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_write(%s) count=%d\n", - __FILE__,__LINE__,info->device_name,count); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_write")) - goto cleanup; - - if (!info->xmit_buf) - goto cleanup; - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - /* operating in synchronous (frame oriented) mode */ - /* operating in synchronous (frame oriented) mode */ - if (info->tx_active) { - - if ( info->params.mode == MGSL_MODE_HDLC ) { - ret = 0; - goto cleanup; - } - /* transmitter is actively sending data - - * if we have multiple transmit dma and - * holding buffers, attempt to queue this - * frame for transmission at a later time. - */ - if (info->tx_holding_count >= info->num_tx_holding_buffers ) { - /* no tx holding buffers available */ - ret = 0; - goto cleanup; - } - - /* queue transmit frame request */ - ret = count; - save_tx_buffer_request(info,buf,count); - - /* if we have sufficient tx dma buffers, - * load the next buffered tx request - */ - spin_lock_irqsave(&info->irq_spinlock,flags); - load_next_tx_holding_buffer(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - goto cleanup; - } - - /* if operating in HDLC LoopMode and the adapter */ - /* has yet to be inserted into the loop, we can't */ - /* transmit */ - - if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) && - !usc_loopmode_active(info) ) - { - ret = 0; - goto cleanup; - } - - if ( info->xmit_cnt ) { - /* Send accumulated from send_char() calls */ - /* as frame and wait before accepting more data. */ - ret = 0; - - /* copy data from circular xmit_buf to */ - /* transmit DMA buffer. */ - mgsl_load_tx_dma_buffer(info, - info->xmit_buf,info->xmit_cnt); - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n", - __FILE__,__LINE__,info->device_name); - } else { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n", - __FILE__,__LINE__,info->device_name); - ret = count; - info->xmit_cnt = count; - mgsl_load_tx_dma_buffer(info,buf,count); - } - } else { - while (1) { - spin_lock_irqsave(&info->irq_spinlock,flags); - c = min_t(int, count, - min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) { - spin_unlock_irqrestore(&info->irq_spinlock,flags); - break; - } - memcpy(info->xmit_buf + info->xmit_head, buf, c); - info->xmit_head = ((info->xmit_head + c) & - (SERIAL_XMIT_SIZE-1)); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->irq_spinlock,flags); - buf += c; - count -= c; - ret += c; - } - } - - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!info->tx_active) - usc_start_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } -cleanup: - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_write(%s) returning=%d\n", - __FILE__,__LINE__,info->device_name,ret); - - return ret; - -} /* end of mgsl_write() */ - -/* mgsl_write_room() - * - * Return the count of free bytes in transmit buffer - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static int mgsl_write_room(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - int ret; - - if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_write_room(%s)=%d\n", - __FILE__,__LINE__, info->device_name,ret ); - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - /* operating in synchronous (frame oriented) mode */ - if ( info->tx_active ) - return 0; - else - return HDLC_MAX_FRAME_SIZE; - } - - return ret; - -} /* end of mgsl_write_room() */ - -/* mgsl_chars_in_buffer() - * - * Return the count of bytes in transmit buffer - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static int mgsl_chars_in_buffer(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_chars_in_buffer(%s)\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer")) - return 0; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n", - __FILE__,__LINE__, info->device_name,info->xmit_cnt ); - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - /* operating in synchronous (frame oriented) mode */ - if ( info->tx_active ) - return info->max_frame_size; - else - return 0; - } - - return info->xmit_cnt; -} /* end of mgsl_chars_in_buffer() */ - -/* mgsl_flush_buffer() - * - * Discard all data in the send buffer - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_flush_buffer(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_flush_buffer(%s) entry\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer")) - return; - - spin_lock_irqsave(&info->irq_spinlock,flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - del_timer(&info->tx_timer); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - tty_wakeup(tty); -} - -/* mgsl_send_xchar() - * - * Send a high-priority XON/XOFF character - * - * Arguments: tty pointer to tty info structure - * ch character to send - * Return Value: None - */ -static void mgsl_send_xchar(struct tty_struct *tty, char ch) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_send_xchar(%s,%d)\n", - __FILE__,__LINE__, info->device_name, ch ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar")) - return; - - info->x_char = ch; - if (ch) { - /* Make sure transmit interrupts are on */ - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!info->tx_enabled) - usc_start_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } -} /* end of mgsl_send_xchar() */ - -/* mgsl_throttle() - * - * Signal remote device to throttle send data (our receive data) - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_throttle(struct tty_struct * tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_throttle(%s) entry\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle")) - return; - - if (I_IXOFF(tty)) - mgsl_send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals &= ~SerialSignal_RTS; - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } -} /* end of mgsl_throttle() */ - -/* mgsl_unthrottle() - * - * Signal remote device to stop throttling send data (our receive data) - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_unthrottle(struct tty_struct * tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_unthrottle(%s) entry\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - mgsl_send_xchar(tty, START_CHAR(tty)); - } - - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals |= SerialSignal_RTS; - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - -} /* end of mgsl_unthrottle() */ - -/* mgsl_get_stats() - * - * get the current serial parameters information - * - * Arguments: info pointer to device instance data - * user_icount pointer to buffer to hold returned stats - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_get_params(%s)\n", - __FILE__,__LINE__, info->device_name); - - if (!user_icount) { - memset(&info->icount, 0, sizeof(info->icount)); - } else { - mutex_lock(&info->port.mutex); - COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); - mutex_unlock(&info->port.mutex); - if (err) - return -EFAULT; - } - - return 0; - -} /* end of mgsl_get_stats() */ - -/* mgsl_get_params() - * - * get the current serial parameters information - * - * Arguments: info pointer to device instance data - * user_params pointer to buffer to hold returned params - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_get_params(%s)\n", - __FILE__,__LINE__, info->device_name); - - mutex_lock(&info->port.mutex); - COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); - mutex_unlock(&info->port.mutex); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; - -} /* end of mgsl_get_params() */ - -/* mgsl_set_params() - * - * set the serial parameters - * - * Arguments: - * - * info pointer to device instance data - * new_params user buffer containing new serial params - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params) -{ - unsigned long flags; - MGSL_PARAMS tmp_params; - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__, - info->device_name ); - COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - mutex_lock(&info->port.mutex); - spin_lock_irqsave(&info->irq_spinlock,flags); - memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - mgsl_change_params(info); - mutex_unlock(&info->port.mutex); - - return 0; - -} /* end of mgsl_set_params() */ - -/* mgsl_get_txidle() - * - * get the current transmit idle mode - * - * Arguments: info pointer to device instance data - * idle_mode pointer to buffer to hold returned idle mode - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_get_txidle(%s)=%d\n", - __FILE__,__LINE__, info->device_name, info->idle_mode); - - COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; - -} /* end of mgsl_get_txidle() */ - -/* mgsl_set_txidle() service ioctl to set transmit idle mode - * - * Arguments: info pointer to device instance data - * idle_mode new idle mode - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__, - info->device_name, idle_mode ); - - spin_lock_irqsave(&info->irq_spinlock,flags); - info->idle_mode = idle_mode; - usc_set_txidle( info ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_set_txidle() */ - -/* mgsl_txenable() - * - * enable or disable the transmitter - * - * Arguments: - * - * info pointer to device instance data - * enable 1 = enable, 0 = disable - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_txenable(struct mgsl_struct * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__, - info->device_name, enable); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if ( enable ) { - if ( !info->tx_enabled ) { - - usc_start_transmitter(info); - /*-------------------------------------------------- - * if HDLC/SDLC Loop mode, attempt to insert the - * station in the 'loop' by setting CMR:13. Upon - * receipt of the next GoAhead (RxAbort) sequence, - * the OnLoop indicator (CCSR:7) should go active - * to indicate that we are on the loop - *--------------------------------------------------*/ - if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) - usc_loopmode_insert_request( info ); - } - } else { - if ( info->tx_enabled ) - usc_stop_transmitter(info); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_txenable() */ - -/* mgsl_txabort() abort send HDLC frame - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_txabort(struct mgsl_struct * info) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__, - info->device_name); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) - { - if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) - usc_loopmode_cancel_transmit( info ); - else - usc_TCmd(info,TCmd_SendAbort); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_txabort() */ - -/* mgsl_rxenable() enable or disable the receiver - * - * Arguments: info pointer to device instance data - * enable 1 = enable, 0 = disable - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_rxenable(struct mgsl_struct * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__, - info->device_name, enable); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if ( enable ) { - if ( !info->rx_enabled ) - usc_start_receiver(info); - } else { - if ( info->rx_enabled ) - usc_stop_receiver(info); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_rxenable() */ - -/* mgsl_wait_event() wait for specified event to occur - * - * Arguments: info pointer to device instance data - * mask pointer to bitmask of events to wait for - * Return Value: 0 if successful and bit mask updated with - * of events triggerred, - * otherwise error code - */ -static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr) -{ - unsigned long flags; - int s; - int rc=0; - struct mgsl_icount cprev, cnow; - int events; - int mask; - struct _input_signal_events oldsigs, newsigs; - DECLARE_WAITQUEUE(wait, current); - - COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); - if (rc) { - return -EFAULT; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__, - info->device_name, mask); - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* return immediately if state matches requested events */ - usc_get_serial_signals(info); - s = info->serial_signals; - events = mask & - ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + - ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + - ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); - if (events) { - spin_unlock_irqrestore(&info->irq_spinlock,flags); - goto exit; - } - - /* save current irq counts */ - cprev = info->icount; - oldsigs = info->input_signal_events; - - /* enable hunt and idle irqs if needed */ - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - u16 oldreg = usc_InReg(info,RICR); - u16 newreg = oldreg + - (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) + - (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0); - if (oldreg != newreg) - usc_OutReg(info, RICR, newreg); - } - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&info->event_wait_q, &wait); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get current irq counts */ - spin_lock_irqsave(&info->irq_spinlock,flags); - cnow = info->icount; - newsigs = info->input_signal_events; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - /* if no change, wait aborted for some reason */ - if (newsigs.dsr_up == oldsigs.dsr_up && - newsigs.dsr_down == oldsigs.dsr_down && - newsigs.dcd_up == oldsigs.dcd_up && - newsigs.dcd_down == oldsigs.dcd_down && - newsigs.cts_up == oldsigs.cts_up && - newsigs.cts_down == oldsigs.cts_down && - newsigs.ri_up == oldsigs.ri_up && - newsigs.ri_down == oldsigs.ri_down && - cnow.exithunt == cprev.exithunt && - cnow.rxidle == cprev.rxidle) { - rc = -EIO; - break; - } - - events = mask & - ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + - (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + - (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + - (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + - (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + - (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + - (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + - (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + - (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + - (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); - if (events) - break; - - cprev = cnow; - oldsigs = newsigs; - } - - remove_wait_queue(&info->event_wait_q, &wait); - set_current_state(TASK_RUNNING); - - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!waitqueue_active(&info->event_wait_q)) { - /* disable enable exit hunt mode/idle rcvd IRQs */ - usc_OutReg(info, RICR, usc_InReg(info,RICR) & - ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } -exit: - if ( rc == 0 ) - PUT_USER(rc, events, mask_ptr); - - return rc; - -} /* end of mgsl_wait_event() */ - -static int modem_input_wait(struct mgsl_struct *info,int arg) -{ - unsigned long flags; - int rc; - struct mgsl_icount cprev, cnow; - DECLARE_WAITQUEUE(wait, current); - - /* save current irq counts */ - spin_lock_irqsave(&info->irq_spinlock,flags); - cprev = info->icount; - add_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get new irq counts */ - spin_lock_irqsave(&info->irq_spinlock,flags); - cnow = info->icount; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - /* if no change, wait aborted for some reason */ - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; - break; - } - - /* check for change in caller specified modem input */ - if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || - (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || - (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || - (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { - rc = 0; - break; - } - - cprev = cnow; - } - remove_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_RUNNING); - return rc; -} - -/* return the state of the serial control and status signals - */ -static int tiocmget(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + - ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + - ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + - ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + - ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + - ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmget() value=%08X\n", - __FILE__,__LINE__, info->device_name, result ); - return result; -} - -/* set modem control signals (DTR/RTS) - */ -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmset(%x,%x)\n", - __FILE__,__LINE__,info->device_name, set, clear); - - if (set & TIOCM_RTS) - info->serial_signals |= SerialSignal_RTS; - if (set & TIOCM_DTR) - info->serial_signals |= SerialSignal_DTR; - if (clear & TIOCM_RTS) - info->serial_signals &= ~SerialSignal_RTS; - if (clear & TIOCM_DTR) - info->serial_signals &= ~SerialSignal_DTR; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return 0; -} - -/* mgsl_break() Set or clear transmit break condition - * - * Arguments: tty pointer to tty instance data - * break_state -1=set break condition, 0=clear - * Return Value: error code - */ -static int mgsl_break(struct tty_struct *tty, int break_state) -{ - struct mgsl_struct * info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_break(%s,%d)\n", - __FILE__,__LINE__, info->device_name, break_state); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_break")) - return -EINVAL; - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (break_state == -1) - usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7)); - else - usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7)); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_break() */ - -/* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -static int msgl_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) - -{ - struct mgsl_struct * info = tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - return 0; -} - -/* mgsl_ioctl() Service an IOCTL request - * - * Arguments: - * - * tty pointer to tty instance data - * cmd IOCTL command code - * arg command argument/context - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct mgsl_struct * info = tty->driver_data; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__, - info->device_name, cmd ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - return mgsl_ioctl_common(info, cmd, arg); -} - -static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) -{ - void __user *argp = (void __user *)arg; - - switch (cmd) { - case MGSL_IOCGPARAMS: - return mgsl_get_params(info, argp); - case MGSL_IOCSPARAMS: - return mgsl_set_params(info, argp); - case MGSL_IOCGTXIDLE: - return mgsl_get_txidle(info, argp); - case MGSL_IOCSTXIDLE: - return mgsl_set_txidle(info,(int)arg); - case MGSL_IOCTXENABLE: - return mgsl_txenable(info,(int)arg); - case MGSL_IOCRXENABLE: - return mgsl_rxenable(info,(int)arg); - case MGSL_IOCTXABORT: - return mgsl_txabort(info); - case MGSL_IOCGSTATS: - return mgsl_get_stats(info, argp); - case MGSL_IOCWAITEVENT: - return mgsl_wait_event(info, argp); - case MGSL_IOCLOOPTXDONE: - return mgsl_loopmode_send_done(info); - /* Wait for modem input (DCD,RI,DSR,CTS) change - * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) - */ - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -/* mgsl_set_termios() - * - * Set new termios settings - * - * Arguments: - * - * tty pointer to tty structure - * termios pointer to buffer to hold returned old termios - * - * Return Value: None - */ -static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__, - tty->driver->name ); - - mgsl_change_params(info); - - /* Handle transition to B0 status */ - if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { - info->serial_signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) { - info->serial_signals |= SerialSignal_RTS; - } - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - - /* Handle turning off CRTSCTS */ - if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - mgsl_start(tty); - } - -} /* end of mgsl_set_termios() */ - -/* mgsl_close() - * - * Called when port is closed. Wait for remaining data to be - * sent. Disable port and free resources. - * - * Arguments: - * - * tty pointer to open tty structure - * filp pointer to open file object - * - * Return Value: None - */ -static void mgsl_close(struct tty_struct *tty, struct file * filp) -{ - struct mgsl_struct * info = tty->driver_data; - - if (mgsl_paranoia_check(info, tty->name, "mgsl_close")) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_close(%s) entry, count=%d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - - if (tty_port_close_start(&info->port, tty, filp) == 0) - goto cleanup; - - mutex_lock(&info->port.mutex); - if (info->port.flags & ASYNC_INITIALIZED) - mgsl_wait_until_sent(tty, info->timeout); - mgsl_flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - mutex_unlock(&info->port.mutex); - - tty_port_close_end(&info->port, tty); - info->port.tty = NULL; -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, - tty->driver->name, info->port.count); - -} /* end of mgsl_close() */ - -/* mgsl_wait_until_sent() - * - * Wait until the transmitter is empty. - * - * Arguments: - * - * tty pointer to tty info structure - * timeout time to wait for send completion - * - * Return Value: None - */ -static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct mgsl_struct * info = tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (!info ) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_wait_until_sent(%s) entry\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent")) - return; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - goto exit; - - orig_jiffies = jiffies; - - /* Set check interval to 1/5 of estimated time to - * send a character, and make it at least 1. The check - * interval should also be less than the timeout. - * Note: use tight timings here to satisfy the NIST-PCTS. - */ - - if ( info->params.data_rate ) { - char_time = info->timeout/(32 * 5); - if (!char_time) - char_time++; - } else - char_time = 1; - - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - while (info->tx_active) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } else { - while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) && - info->tx_enabled) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } - -exit: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_wait_until_sent(%s) exit\n", - __FILE__,__LINE__, info->device_name ); - -} /* end of mgsl_wait_until_sent() */ - -/* mgsl_hangup() - * - * Called by tty_hangup() when a hangup is signaled. - * This is the same as to closing all open files for the port. - * - * Arguments: tty pointer to associated tty object - * Return Value: None - */ -static void mgsl_hangup(struct tty_struct *tty) -{ - struct mgsl_struct * info = tty->driver_data; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_hangup(%s)\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup")) - return; - - mgsl_flush_buffer(tty); - shutdown(info); - - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - - wake_up_interruptible(&info->port.open_wait); - -} /* end of mgsl_hangup() */ - -/* - * carrier_raised() - * - * Return true if carrier is raised - */ - -static int carrier_raised(struct tty_port *port) -{ - unsigned long flags; - struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); - - spin_lock_irqsave(&info->irq_spinlock, flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock, flags); - return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (on) - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); -} - - -/* block_til_ready() - * - * Block the current process until the specified port - * is ready to be opened. - * - * Arguments: - * - * tty pointer to tty info structure - * filp pointer to open file object - * info pointer to device instance data - * - * Return Value: 0 if success, otherwise error code - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct mgsl_struct *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - bool extra_count = false; - unsigned long flags; - int dcd; - struct tty_port *port = &info->port; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready on %s\n", - __FILE__,__LINE__, tty->driver->name ); - - if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ - /* nonblock mode is set or port is not enabled */ - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * mgsl_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready before block on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - spin_lock_irqsave(&info->irq_spinlock, flags); - if (!tty_hung_up_p(filp)) { - extra_count = true; - port->count--; - } - spin_unlock_irqrestore(&info->irq_spinlock, flags); - port->blocked_open++; - - while (1) { - if (tty->termios->c_cflag & CBAUD) - tty_port_raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ - retval = (port->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - dcd = tty_port_carrier_raised(&info->port); - - if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd)) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - tty_unlock(); - schedule(); - tty_lock(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - /* FIXME: Racy on hangup during close wait */ - if (extra_count) - port->count++; - port->blocked_open--; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready after blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - if (!retval) - port->flags |= ASYNC_NORMAL_ACTIVE; - - return retval; - -} /* end of block_til_ready() */ - -/* mgsl_open() - * - * Called when a port is opened. Init and enable port. - * Perform serial-specific initialization for the tty structure. - * - * Arguments: tty pointer to tty info structure - * filp associated file pointer - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_open(struct tty_struct *tty, struct file * filp) -{ - struct mgsl_struct *info; - int retval, line; - unsigned long flags; - - /* verify range of specified line number */ - line = tty->index; - if ((line < 0) || (line >= mgsl_device_count)) { - printk("%s(%d):mgsl_open with invalid line #%d.\n", - __FILE__,__LINE__,line); - return -ENODEV; - } - - /* find the info structure for the specified line */ - info = mgsl_device_list; - while(info && info->line != line) - info = info->next_device; - if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) - return -ENODEV; - - tty->driver_data = info; - info->port.tty = tty; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_open(%s), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, info->port.count); - - /* If port is closing, signal caller to try again */ - if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){ - if (info->port.flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->port.close_wait); - retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - goto cleanup; - } - - info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - spin_lock_irqsave(&info->netlock, flags); - if (info->netcount) { - retval = -EBUSY; - spin_unlock_irqrestore(&info->netlock, flags); - goto cleanup; - } - info->port.count++; - spin_unlock_irqrestore(&info->netlock, flags); - - if (info->port.count == 1) { - /* 1st open on this device, init hardware */ - retval = startup(info); - if (retval < 0) - goto cleanup; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready(%s) returned %d\n", - __FILE__,__LINE__, info->device_name, retval); - goto cleanup; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_open(%s) success\n", - __FILE__,__LINE__, info->device_name); - retval = 0; - -cleanup: - if (retval) { - if (tty->count == 1) - info->port.tty = NULL; /* tty layer will release tty struct */ - if(info->port.count) - info->port.count--; - } - - return retval; - -} /* end of mgsl_open() */ - -/* - * /proc fs routines.... - */ - -static inline void line_info(struct seq_file *m, struct mgsl_struct *info) -{ - char stat_buf[30]; - unsigned long flags; - - if (info->bus_type == MGSL_BUS_TYPE_PCI) { - seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X", - info->device_name, info->io_base, info->irq_level, - info->phys_memory_base, info->phys_lcr_base); - } else { - seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d", - info->device_name, info->io_base, - info->irq_level, info->dma_level); - } - - /* output current serial signal states */ - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (info->serial_signals & SerialSignal_RTS) - strcat(stat_buf, "|RTS"); - if (info->serial_signals & SerialSignal_CTS) - strcat(stat_buf, "|CTS"); - if (info->serial_signals & SerialSignal_DTR) - strcat(stat_buf, "|DTR"); - if (info->serial_signals & SerialSignal_DSR) - strcat(stat_buf, "|DSR"); - if (info->serial_signals & SerialSignal_DCD) - strcat(stat_buf, "|CD"); - if (info->serial_signals & SerialSignal_RI) - strcat(stat_buf, "|RI"); - - if (info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - seq_printf(m, " HDLC txok:%d rxok:%d", - info->icount.txok, info->icount.rxok); - if (info->icount.txunder) - seq_printf(m, " txunder:%d", info->icount.txunder); - if (info->icount.txabort) - seq_printf(m, " txabort:%d", info->icount.txabort); - if (info->icount.rxshort) - seq_printf(m, " rxshort:%d", info->icount.rxshort); - if (info->icount.rxlong) - seq_printf(m, " rxlong:%d", info->icount.rxlong); - if (info->icount.rxover) - seq_printf(m, " rxover:%d", info->icount.rxover); - if (info->icount.rxcrc) - seq_printf(m, " rxcrc:%d", info->icount.rxcrc); - } else { - seq_printf(m, " ASYNC tx:%d rx:%d", - info->icount.tx, info->icount.rx); - if (info->icount.frame) - seq_printf(m, " fe:%d", info->icount.frame); - if (info->icount.parity) - seq_printf(m, " pe:%d", info->icount.parity); - if (info->icount.brk) - seq_printf(m, " brk:%d", info->icount.brk); - if (info->icount.overrun) - seq_printf(m, " oe:%d", info->icount.overrun); - } - - /* Append serial signal status to end */ - seq_printf(m, " %s\n", stat_buf+1); - - seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", - info->tx_active,info->bh_requested,info->bh_running, - info->pending_bh); - - spin_lock_irqsave(&info->irq_spinlock,flags); - { - u16 Tcsr = usc_InReg( info, TCSR ); - u16 Tdmr = usc_InDmaReg( info, TDMR ); - u16 Ticr = usc_InReg( info, TICR ); - u16 Rscr = usc_InReg( info, RCSR ); - u16 Rdmr = usc_InDmaReg( info, RDMR ); - u16 Ricr = usc_InReg( info, RICR ); - u16 Icr = usc_InReg( info, ICR ); - u16 Dccr = usc_InReg( info, DCCR ); - u16 Tmr = usc_InReg( info, TMR ); - u16 Tccr = usc_InReg( info, TCCR ); - u16 Ccar = inw( info->io_base + CCAR ); - seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n" - "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n", - Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar ); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); -} - -/* Called to print information about devices */ -static int mgsl_proc_show(struct seq_file *m, void *v) -{ - struct mgsl_struct *info; - - seq_printf(m, "synclink driver:%s\n", driver_version); - - info = mgsl_device_list; - while( info ) { - line_info(m, info); - info = info->next_device; - } - return 0; -} - -static int mgsl_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, mgsl_proc_show, NULL); -} - -static const struct file_operations mgsl_proc_fops = { - .owner = THIS_MODULE, - .open = mgsl_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* mgsl_allocate_dma_buffers() - * - * Allocate and format DMA buffers (ISA adapter) - * or format shared memory buffers (PCI adapter). - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise error - */ -static int mgsl_allocate_dma_buffers(struct mgsl_struct *info) -{ - unsigned short BuffersPerFrame; - - info->last_mem_alloc = 0; - - /* Calculate the number of DMA buffers necessary to hold the */ - /* largest allowable frame size. Note: If the max frame size is */ - /* not an even multiple of the DMA buffer size then we need to */ - /* round the buffer count per frame up one. */ - - BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE); - if ( info->max_frame_size % DMABUFFERSIZE ) - BuffersPerFrame++; - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - /* - * The PCI adapter has 256KBytes of shared memory to use. - * This is 64 PAGE_SIZE buffers. - * - * The first page is used for padding at this time so the - * buffer list does not begin at offset 0 of the PCI - * adapter's shared memory. - * - * The 2nd page is used for the buffer list. A 4K buffer - * list can hold 128 DMA_BUFFER structures at 32 bytes - * each. - * - * This leaves 62 4K pages. - * - * The next N pages are used for transmit frame(s). We - * reserve enough 4K page blocks to hold the required - * number of transmit dma buffers (num_tx_dma_buffers), - * each of MaxFrameSize size. - * - * Of the remaining pages (62-N), determine how many can - * be used to receive full MaxFrameSize inbound frames - */ - info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame; - info->rx_buffer_count = 62 - info->tx_buffer_count; - } else { - /* Calculate the number of PAGE_SIZE buffers needed for */ - /* receive and transmit DMA buffers. */ - - - /* Calculate the number of DMA buffers necessary to */ - /* hold 7 max size receive frames and one max size transmit frame. */ - /* The receive buffer count is bumped by one so we avoid an */ - /* End of List condition if all receive buffers are used when */ - /* using linked list DMA buffers. */ - - info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame; - info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6; - - /* - * limit total TxBuffers & RxBuffers to 62 4K total - * (ala PCI Allocation) - */ - - if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 ) - info->rx_buffer_count = 62 - info->tx_buffer_count; - - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n", - __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count); - - if ( mgsl_alloc_buffer_list_memory( info ) < 0 || - mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 || - mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 || - mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 || - mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) { - printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__); - return -ENOMEM; - } - - mgsl_reset_rx_dma_buffers( info ); - mgsl_reset_tx_dma_buffers( info ); - - return 0; - -} /* end of mgsl_allocate_dma_buffers() */ - -/* - * mgsl_alloc_buffer_list_memory() - * - * Allocate a common DMA buffer for use as the - * receive and transmit buffer lists. - * - * A buffer list is a set of buffer entries where each entry contains - * a pointer to an actual buffer and a pointer to the next buffer entry - * (plus some other info about the buffer). - * - * The buffer entries for a list are built to form a circular list so - * that when the entire list has been traversed you start back at the - * beginning. - * - * This function allocates memory for just the buffer entries. - * The links (pointer to next entry) are filled in with the physical - * address of the next entry so the adapter can navigate the list - * using bus master DMA. The pointers to the actual buffers are filled - * out later when the actual buffers are allocated. - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise error - */ -static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info ) -{ - unsigned int i; - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - /* PCI adapter uses shared memory. */ - info->buffer_list = info->memory_base + info->last_mem_alloc; - info->buffer_list_phys = info->last_mem_alloc; - info->last_mem_alloc += BUFFERLISTSIZE; - } else { - /* ISA adapter uses system memory. */ - /* The buffer lists are allocated as a common buffer that both */ - /* the processor and adapter can access. This allows the driver to */ - /* inspect portions of the buffer while other portions are being */ - /* updated by the adapter using Bus Master DMA. */ - - info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL); - if (info->buffer_list == NULL) - return -ENOMEM; - info->buffer_list_phys = (u32)(info->buffer_list_dma_addr); - } - - /* We got the memory for the buffer entry lists. */ - /* Initialize the memory block to all zeros. */ - memset( info->buffer_list, 0, BUFFERLISTSIZE ); - - /* Save virtual address pointers to the receive and */ - /* transmit buffer lists. (Receive 1st). These pointers will */ - /* be used by the processor to access the lists. */ - info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; - info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; - info->tx_buffer_list += info->rx_buffer_count; - - /* - * Build the links for the buffer entry lists such that - * two circular lists are built. (Transmit and Receive). - * - * Note: the links are physical addresses - * which are read by the adapter to determine the next - * buffer entry to use. - */ - - for ( i = 0; i < info->rx_buffer_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->rx_buffer_list[i].phys_entry = - info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - - info->rx_buffer_list[i].link = info->buffer_list_phys; - - if ( i < info->rx_buffer_count - 1 ) - info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); - } - - for ( i = 0; i < info->tx_buffer_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->tx_buffer_list[i].phys_entry = info->buffer_list_phys + - ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - - info->tx_buffer_list[i].link = info->buffer_list_phys + - info->rx_buffer_count * sizeof(DMABUFFERENTRY); - - if ( i < info->tx_buffer_count - 1 ) - info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); - } - - return 0; - -} /* end of mgsl_alloc_buffer_list_memory() */ - -/* Free DMA buffers allocated for use as the - * receive and transmit buffer lists. - * Warning: - * - * The data transfer buffers associated with the buffer list - * MUST be freed before freeing the buffer list itself because - * the buffer list contains the information necessary to free - * the individual buffers! - */ -static void mgsl_free_buffer_list_memory( struct mgsl_struct *info ) -{ - if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI) - dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr); - - info->buffer_list = NULL; - info->rx_buffer_list = NULL; - info->tx_buffer_list = NULL; - -} /* end of mgsl_free_buffer_list_memory() */ - -/* - * mgsl_alloc_frame_memory() - * - * Allocate the frame DMA buffers used by the specified buffer list. - * Each DMA buffer will be one memory page in size. This is necessary - * because memory can fragment enough that it may be impossible - * contiguous pages. - * - * Arguments: - * - * info pointer to device instance data - * BufferList pointer to list of buffer entries - * Buffercount count of buffer entries in buffer list - * - * Return Value: 0 if success, otherwise -ENOMEM - */ -static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount) -{ - int i; - u32 phys_addr; - - /* Allocate page sized buffers for the receive buffer list */ - - for ( i = 0; i < Buffercount; i++ ) { - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - /* PCI adapter uses shared memory buffers. */ - BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc; - phys_addr = info->last_mem_alloc; - info->last_mem_alloc += DMABUFFERSIZE; - } else { - /* ISA adapter uses system memory. */ - BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL); - if (BufferList[i].virt_addr == NULL) - return -ENOMEM; - phys_addr = (u32)(BufferList[i].dma_addr); - } - BufferList[i].phys_addr = phys_addr; - } - - return 0; - -} /* end of mgsl_alloc_frame_memory() */ - -/* - * mgsl_free_frame_memory() - * - * Free the buffers associated with - * each buffer entry of a buffer list. - * - * Arguments: - * - * info pointer to device instance data - * BufferList pointer to list of buffer entries - * Buffercount count of buffer entries in buffer list - * - * Return Value: None - */ -static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount) -{ - int i; - - if ( BufferList ) { - for ( i = 0 ; i < Buffercount ; i++ ) { - if ( BufferList[i].virt_addr ) { - if ( info->bus_type != MGSL_BUS_TYPE_PCI ) - dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr); - BufferList[i].virt_addr = NULL; - } - } - } - -} /* end of mgsl_free_frame_memory() */ - -/* mgsl_free_dma_buffers() - * - * Free DMA buffers - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_free_dma_buffers( struct mgsl_struct *info ) -{ - mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count ); - mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count ); - mgsl_free_buffer_list_memory( info ); - -} /* end of mgsl_free_dma_buffers() */ - - -/* - * mgsl_alloc_intermediate_rxbuffer_memory() - * - * Allocate a buffer large enough to hold max_frame_size. This buffer - * is used to pass an assembled frame to the line discipline. - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: 0 if success, otherwise -ENOMEM - */ -static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info) -{ - info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA); - if ( info->intermediate_rxbuffer == NULL ) - return -ENOMEM; - - return 0; - -} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */ - -/* - * mgsl_free_intermediate_rxbuffer_memory() - * - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: None - */ -static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info) -{ - kfree(info->intermediate_rxbuffer); - info->intermediate_rxbuffer = NULL; - -} /* end of mgsl_free_intermediate_rxbuffer_memory() */ - -/* - * mgsl_alloc_intermediate_txbuffer_memory() - * - * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size. - * This buffer is used to load transmit frames into the adapter's dma transfer - * buffers when there is sufficient space. - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: 0 if success, otherwise -ENOMEM - */ -static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info) -{ - int i; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s %s(%d) allocating %d tx holding buffers\n", - info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers); - - memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers)); - - for ( i=0; inum_tx_holding_buffers; ++i) { - info->tx_holding_buffers[i].buffer = - kmalloc(info->max_frame_size, GFP_KERNEL); - if (info->tx_holding_buffers[i].buffer == NULL) { - for (--i; i >= 0; i--) { - kfree(info->tx_holding_buffers[i].buffer); - info->tx_holding_buffers[i].buffer = NULL; - } - return -ENOMEM; - } - } - - return 0; - -} /* end of mgsl_alloc_intermediate_txbuffer_memory() */ - -/* - * mgsl_free_intermediate_txbuffer_memory() - * - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: None - */ -static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info) -{ - int i; - - for ( i=0; inum_tx_holding_buffers; ++i ) { - kfree(info->tx_holding_buffers[i].buffer); - info->tx_holding_buffers[i].buffer = NULL; - } - - info->get_tx_holding_index = 0; - info->put_tx_holding_index = 0; - info->tx_holding_count = 0; - -} /* end of mgsl_free_intermediate_txbuffer_memory() */ - - -/* - * load_next_tx_holding_buffer() - * - * attempts to load the next buffered tx request into the - * tx dma buffers - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: true if next buffered tx request loaded - * into adapter's tx dma buffer, - * false otherwise - */ -static bool load_next_tx_holding_buffer(struct mgsl_struct *info) -{ - bool ret = false; - - if ( info->tx_holding_count ) { - /* determine if we have enough tx dma buffers - * to accommodate the next tx frame - */ - struct tx_holding_buffer *ptx = - &info->tx_holding_buffers[info->get_tx_holding_index]; - int num_free = num_free_tx_dma_buffers(info); - int num_needed = ptx->buffer_size / DMABUFFERSIZE; - if ( ptx->buffer_size % DMABUFFERSIZE ) - ++num_needed; - - if (num_needed <= num_free) { - info->xmit_cnt = ptx->buffer_size; - mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size); - - --info->tx_holding_count; - if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers) - info->get_tx_holding_index=0; - - /* restart transmit timer */ - mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000)); - - ret = true; - } - } - - return ret; -} - -/* - * save_tx_buffer_request() - * - * attempt to store transmit frame request for later transmission - * - * Arguments: - * - * info pointer to device instance data - * Buffer pointer to buffer containing frame to load - * BufferSize size in bytes of frame in Buffer - * - * Return Value: 1 if able to store, 0 otherwise - */ -static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize) -{ - struct tx_holding_buffer *ptx; - - if ( info->tx_holding_count >= info->num_tx_holding_buffers ) { - return 0; /* all buffers in use */ - } - - ptx = &info->tx_holding_buffers[info->put_tx_holding_index]; - ptx->buffer_size = BufferSize; - memcpy( ptx->buffer, Buffer, BufferSize); - - ++info->tx_holding_count; - if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers) - info->put_tx_holding_index=0; - - return 1; -} - -static int mgsl_claim_resources(struct mgsl_struct *info) -{ - if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) { - printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->io_base); - return -ENODEV; - } - info->io_addr_requested = true; - - if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags, - info->device_name, info ) < 0 ) { - printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n", - __FILE__,__LINE__,info->device_name, info->irq_level ); - goto errout; - } - info->irq_requested = true; - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) { - printk( "%s(%d):mem addr conflict device %s Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base); - goto errout; - } - info->shared_mem_requested = true; - if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) { - printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset); - goto errout; - } - info->lcr_mem_requested = true; - - info->memory_base = ioremap_nocache(info->phys_memory_base, - 0x40000); - if (!info->memory_base) { - printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - goto errout; - } - - if ( !mgsl_memory_test(info) ) { - printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - goto errout; - } - - info->lcr_base = ioremap_nocache(info->phys_lcr_base, - PAGE_SIZE); - if (!info->lcr_base) { - printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); - goto errout; - } - info->lcr_base += info->lcr_offset; - - } else { - /* claim DMA channel */ - - if (request_dma(info->dma_level,info->device_name) < 0){ - printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n", - __FILE__,__LINE__,info->device_name, info->dma_level ); - mgsl_release_resources( info ); - return -ENODEV; - } - info->dma_requested = true; - - /* ISA adapter uses bus master DMA */ - set_dma_mode(info->dma_level,DMA_MODE_CASCADE); - enable_dma(info->dma_level); - } - - if ( mgsl_allocate_dma_buffers(info) < 0 ) { - printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n", - __FILE__,__LINE__,info->device_name, info->dma_level ); - goto errout; - } - - return 0; -errout: - mgsl_release_resources(info); - return -ENODEV; - -} /* end of mgsl_claim_resources() */ - -static void mgsl_release_resources(struct mgsl_struct *info) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_release_resources(%s) entry\n", - __FILE__,__LINE__,info->device_name ); - - if ( info->irq_requested ) { - free_irq(info->irq_level, info); - info->irq_requested = false; - } - if ( info->dma_requested ) { - disable_dma(info->dma_level); - free_dma(info->dma_level); - info->dma_requested = false; - } - mgsl_free_dma_buffers(info); - mgsl_free_intermediate_rxbuffer_memory(info); - mgsl_free_intermediate_txbuffer_memory(info); - - if ( info->io_addr_requested ) { - release_region(info->io_base,info->io_addr_size); - info->io_addr_requested = false; - } - if ( info->shared_mem_requested ) { - release_mem_region(info->phys_memory_base,0x40000); - info->shared_mem_requested = false; - } - if ( info->lcr_mem_requested ) { - release_mem_region(info->phys_lcr_base + info->lcr_offset,128); - info->lcr_mem_requested = false; - } - if (info->memory_base){ - iounmap(info->memory_base); - info->memory_base = NULL; - } - if (info->lcr_base){ - iounmap(info->lcr_base - info->lcr_offset); - info->lcr_base = NULL; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_release_resources(%s) exit\n", - __FILE__,__LINE__,info->device_name ); - -} /* end of mgsl_release_resources() */ - -/* mgsl_add_device() - * - * Add the specified device instance data structure to the - * global linked list of devices and increment the device count. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_add_device( struct mgsl_struct *info ) -{ - info->next_device = NULL; - info->line = mgsl_device_count; - sprintf(info->device_name,"ttySL%d",info->line); - - if (info->line < MAX_TOTAL_DEVICES) { - if (maxframe[info->line]) - info->max_frame_size = maxframe[info->line]; - - if (txdmabufs[info->line]) { - info->num_tx_dma_buffers = txdmabufs[info->line]; - if (info->num_tx_dma_buffers < 1) - info->num_tx_dma_buffers = 1; - } - - if (txholdbufs[info->line]) { - info->num_tx_holding_buffers = txholdbufs[info->line]; - if (info->num_tx_holding_buffers < 1) - info->num_tx_holding_buffers = 1; - else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS) - info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS; - } - } - - mgsl_device_count++; - - if ( !mgsl_device_list ) - mgsl_device_list = info; - else { - struct mgsl_struct *current_dev = mgsl_device_list; - while( current_dev->next_device ) - current_dev = current_dev->next_device; - current_dev->next_device = info; - } - - if ( info->max_frame_size < 4096 ) - info->max_frame_size = 4096; - else if ( info->max_frame_size > 65535 ) - info->max_frame_size = 65535; - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n", - info->hw_version + 1, info->device_name, info->io_base, info->irq_level, - info->phys_memory_base, info->phys_lcr_base, - info->max_frame_size ); - } else { - printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n", - info->device_name, info->io_base, info->irq_level, info->dma_level, - info->max_frame_size ); - } - -#if SYNCLINK_GENERIC_HDLC - hdlcdev_init(info); -#endif - -} /* end of mgsl_add_device() */ - -static const struct tty_port_operations mgsl_port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - - -/* mgsl_allocate_device() - * - * Allocate and initialize a device instance structure - * - * Arguments: none - * Return Value: pointer to mgsl_struct if success, otherwise NULL - */ -static struct mgsl_struct* mgsl_allocate_device(void) -{ - struct mgsl_struct *info; - - info = kzalloc(sizeof(struct mgsl_struct), - GFP_KERNEL); - - if (!info) { - printk("Error can't allocate device instance data\n"); - } else { - tty_port_init(&info->port); - info->port.ops = &mgsl_port_ops; - info->magic = MGSL_MAGIC; - INIT_WORK(&info->task, mgsl_bh_handler); - info->max_frame_size = 4096; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->irq_spinlock); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->num_tx_dma_buffers = 1; - info->num_tx_holding_buffers = 0; - } - - return info; - -} /* end of mgsl_allocate_device()*/ - -static const struct tty_operations mgsl_ops = { - .open = mgsl_open, - .close = mgsl_close, - .write = mgsl_write, - .put_char = mgsl_put_char, - .flush_chars = mgsl_flush_chars, - .write_room = mgsl_write_room, - .chars_in_buffer = mgsl_chars_in_buffer, - .flush_buffer = mgsl_flush_buffer, - .ioctl = mgsl_ioctl, - .throttle = mgsl_throttle, - .unthrottle = mgsl_unthrottle, - .send_xchar = mgsl_send_xchar, - .break_ctl = mgsl_break, - .wait_until_sent = mgsl_wait_until_sent, - .set_termios = mgsl_set_termios, - .stop = mgsl_stop, - .start = mgsl_start, - .hangup = mgsl_hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, - .get_icount = msgl_get_icount, - .proc_fops = &mgsl_proc_fops, -}; - -/* - * perform tty device initialization - */ -static int mgsl_init_tty(void) -{ - int rc; - - serial_driver = alloc_tty_driver(128); - if (!serial_driver) - return -ENOMEM; - - serial_driver->owner = THIS_MODULE; - serial_driver->driver_name = "synclink"; - serial_driver->name = "ttySL"; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->init_termios.c_ispeed = 9600; - serial_driver->init_termios.c_ospeed = 9600; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &mgsl_ops); - if ((rc = tty_register_driver(serial_driver)) < 0) { - printk("%s(%d):Couldn't register serial driver\n", - __FILE__,__LINE__); - put_tty_driver(serial_driver); - serial_driver = NULL; - return rc; - } - - printk("%s %s, tty major#%d\n", - driver_name, driver_version, - serial_driver->major); - return 0; -} - -/* enumerate user specified ISA adapters - */ -static void mgsl_enum_isa_devices(void) -{ - struct mgsl_struct *info; - int i; - - /* Check for user specified ISA devices */ - - for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("ISA device specified io=%04X,irq=%d,dma=%d\n", - io[i], irq[i], dma[i] ); - - info = mgsl_allocate_device(); - if ( !info ) { - /* error allocating device instance data */ - if ( debug_level >= DEBUG_LEVEL_ERROR ) - printk( "can't allocate device instance data.\n"); - continue; - } - - /* Copy user configuration info to device instance data */ - info->io_base = (unsigned int)io[i]; - info->irq_level = (unsigned int)irq[i]; - info->irq_level = irq_canonicalize(info->irq_level); - info->dma_level = (unsigned int)dma[i]; - info->bus_type = MGSL_BUS_TYPE_ISA; - info->io_addr_size = 16; - info->irq_flags = 0; - - mgsl_add_device( info ); - } -} - -static void synclink_cleanup(void) -{ - int rc; - struct mgsl_struct *info; - struct mgsl_struct *tmp; - - printk("Unloading %s: %s\n", driver_name, driver_version); - - if (serial_driver) { - if ((rc = tty_unregister_driver(serial_driver))) - printk("%s(%d) failed to unregister tty driver err=%d\n", - __FILE__,__LINE__,rc); - put_tty_driver(serial_driver); - } - - info = mgsl_device_list; - while(info) { -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - mgsl_release_resources(info); - tmp = info; - info = info->next_device; - kfree(tmp); - } - - if (pci_registered) - pci_unregister_driver(&synclink_pci_driver); -} - -static int __init synclink_init(void) -{ - int rc; - - if (break_on_load) { - mgsl_get_text_ptr(); - BREAKPOINT(); - } - - printk("%s %s\n", driver_name, driver_version); - - mgsl_enum_isa_devices(); - if ((rc = pci_register_driver(&synclink_pci_driver)) < 0) - printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); - else - pci_registered = true; - - if ((rc = mgsl_init_tty()) < 0) - goto error; - - return 0; - -error: - synclink_cleanup(); - return rc; -} - -static void __exit synclink_exit(void) -{ - synclink_cleanup(); -} - -module_init(synclink_init); -module_exit(synclink_exit); - -/* - * usc_RTCmd() - * - * Issue a USC Receive/Transmit command to the - * Channel Command/Address Register (CCAR). - * - * Notes: - * - * The command is encoded in the most significant 5 bits <15..11> - * of the CCAR value. Bits <10..7> of the CCAR must be preserved - * and Bits <6..0> must be written as zeros. - * - * Arguments: - * - * info pointer to device information structure - * Cmd command mask (use symbolic macros) - * - * Return Value: - * - * None - */ -static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ) -{ - /* output command to CCAR in bits <15..11> */ - /* preserve bits <10..7>, bits <6..0> must be zero */ - - outw( Cmd + info->loopback_bits, info->io_base + CCAR ); - - /* Read to flush write to CCAR */ - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - inw( info->io_base + CCAR ); - -} /* end of usc_RTCmd() */ - -/* - * usc_DmaCmd() - * - * Issue a DMA command to the DMA Command/Address Register (DCAR). - * - * Arguments: - * - * info pointer to device information structure - * Cmd DMA command mask (usc_DmaCmd_XX Macros) - * - * Return Value: - * - * None - */ -static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ) -{ - /* write command mask to DCAR */ - outw( Cmd + info->mbre_bit, info->io_base ); - - /* Read to flush write to DCAR */ - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - inw( info->io_base ); - -} /* end of usc_DmaCmd() */ - -/* - * usc_OutDmaReg() - * - * Write a 16-bit value to a USC DMA register - * - * Arguments: - * - * info pointer to device info structure - * RegAddr register address (number) for write - * RegValue 16-bit value to write to register - * - * Return Value: - * - * None - * - */ -static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) -{ - /* Note: The DCAR is located at the adapter base address */ - /* Note: must preserve state of BIT8 in DCAR */ - - outw( RegAddr + info->mbre_bit, info->io_base ); - outw( RegValue, info->io_base ); - - /* Read to flush write to DCAR */ - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - inw( info->io_base ); - -} /* end of usc_OutDmaReg() */ - -/* - * usc_InDmaReg() - * - * Read a 16-bit value from a DMA register - * - * Arguments: - * - * info pointer to device info structure - * RegAddr register address (number) to read from - * - * Return Value: - * - * The 16-bit value read from register - * - */ -static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr ) -{ - /* Note: The DCAR is located at the adapter base address */ - /* Note: must preserve state of BIT8 in DCAR */ - - outw( RegAddr + info->mbre_bit, info->io_base ); - return inw( info->io_base ); - -} /* end of usc_InDmaReg() */ - -/* - * - * usc_OutReg() - * - * Write a 16-bit value to a USC serial channel register - * - * Arguments: - * - * info pointer to device info structure - * RegAddr register address (number) to write to - * RegValue 16-bit value to write to register - * - * Return Value: - * - * None - * - */ -static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) -{ - outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); - outw( RegValue, info->io_base + CCAR ); - - /* Read to flush write to CCAR */ - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - inw( info->io_base + CCAR ); - -} /* end of usc_OutReg() */ - -/* - * usc_InReg() - * - * Reads a 16-bit value from a USC serial channel register - * - * Arguments: - * - * info pointer to device extension - * RegAddr register address (number) to read from - * - * Return Value: - * - * 16-bit value read from register - */ -static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr ) -{ - outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); - return inw( info->io_base + CCAR ); - -} /* end of usc_InReg() */ - -/* usc_set_sdlc_mode() - * - * Set up the adapter for SDLC DMA communications. - * - * Arguments: info pointer to device instance data - * Return Value: NONE - */ -static void usc_set_sdlc_mode( struct mgsl_struct *info ) -{ - u16 RegValue; - bool PreSL1660; - - /* - * determine if the IUSC on the adapter is pre-SL1660. If - * not, take advantage of the UnderWait feature of more - * modern chips. If an underrun occurs and this bit is set, - * the transmitter will idle the programmed idle pattern - * until the driver has time to service the underrun. Otherwise, - * the dma controller may get the cycles previously requested - * and begin transmitting queued tx data. - */ - usc_OutReg(info,TMCR,0x1f); - RegValue=usc_InReg(info,TMDR); - PreSL1660 = (RegValue == IUSC_PRE_SL1660); - - if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) - { - /* - ** Channel Mode Register (CMR) - ** - ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun - ** <13> 0 0 = Transmit Disabled (initially) - ** <12> 0 1 = Consecutive Idles share common 0 - ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop - ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling - ** <3..0> 0110 Receiver Mode = HDLC/SDLC - ** - ** 1000 1110 0000 0110 = 0x8e06 - */ - RegValue = 0x8e06; - - /*-------------------------------------------------- - * ignore user options for UnderRun Actions and - * preambles - *--------------------------------------------------*/ - } - else - { - /* Channel mode Register (CMR) - * - * <15..14> 00 Tx Sub modes, Underrun Action - * <13> 0 1 = Send Preamble before opening flag - * <12> 0 1 = Consecutive Idles share common 0 - * <11..8> 0110 Transmitter mode = HDLC/SDLC - * <7..4> 0000 Rx Sub modes, addr/ctrl field handling - * <3..0> 0110 Receiver mode = HDLC/SDLC - * - * 0000 0110 0000 0110 = 0x0606 - */ - if (info->params.mode == MGSL_MODE_RAW) { - RegValue = 0x0001; /* Set Receive mode = external sync */ - - usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */ - (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12)); - - /* - * TxSubMode: - * CMR <15> 0 Don't send CRC on Tx Underrun - * CMR <14> x undefined - * CMR <13> 0 Send preamble before openning sync - * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength - * - * TxMode: - * CMR <11-8) 0100 MonoSync - * - * 0x00 0100 xxxx xxxx 04xx - */ - RegValue |= 0x0400; - } - else { - - RegValue = 0x0606; - - if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 ) - RegValue |= BIT14; - else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG ) - RegValue |= BIT15; - else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC ) - RegValue |= BIT15 + BIT14; - } - - if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE ) - RegValue |= BIT13; - } - - if ( info->params.mode == MGSL_MODE_HDLC && - (info->params.flags & HDLC_FLAG_SHARE_ZERO) ) - RegValue |= BIT12; - - if ( info->params.addr_filter != 0xff ) - { - /* set up receive address filtering */ - usc_OutReg( info, RSR, info->params.addr_filter ); - RegValue |= BIT4; - } - - usc_OutReg( info, CMR, RegValue ); - info->cmr_value = RegValue; - - /* Receiver mode Register (RMR) - * - * <15..13> 000 encoding - * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) - * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC) - * <9> 0 1 = Include Receive chars in CRC - * <8> 1 1 = Use Abort/PE bit as abort indicator - * <7..6> 00 Even parity - * <5> 0 parity disabled - * <4..2> 000 Receive Char Length = 8 bits - * <1..0> 00 Disable Receiver - * - * 0000 0101 0000 0000 = 0x0500 - */ - - RegValue = 0x0500; - - switch ( info->params.encoding ) { - case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; - case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; - case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break; - case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break; - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break; - } - - if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) - RegValue |= BIT9; - else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) - RegValue |= ( BIT12 | BIT10 | BIT9 ); - - usc_OutReg( info, RMR, RegValue ); - - /* Set the Receive count Limit Register (RCLR) to 0xffff. */ - /* When an opening flag of an SDLC frame is recognized the */ - /* Receive Character count (RCC) is loaded with the value in */ - /* RCLR. The RCC is decremented for each received byte. The */ - /* value of RCC is stored after the closing flag of the frame */ - /* allowing the frame size to be computed. */ - - usc_OutReg( info, RCLR, RCLRVALUE ); - - usc_RCmd( info, RCmd_SelectRicrdma_level ); - - /* Receive Interrupt Control Register (RICR) - * - * <15..8> ? RxFIFO DMA Request Level - * <7> 0 Exited Hunt IA (Interrupt Arm) - * <6> 0 Idle Received IA - * <5> 0 Break/Abort IA - * <4> 0 Rx Bound IA - * <3> 1 Queued status reflects oldest 2 bytes in FIFO - * <2> 0 Abort/PE IA - * <1> 1 Rx Overrun IA - * <0> 0 Select TC0 value for readback - * - * 0000 0000 0000 1000 = 0x000a - */ - - /* Carry over the Exit Hunt and Idle Received bits */ - /* in case they have been armed by usc_ArmEvents. */ - - RegValue = usc_InReg( info, RICR ) & 0xc0; - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - usc_OutReg( info, RICR, (u16)(0x030a | RegValue) ); - else - usc_OutReg( info, RICR, (u16)(0x140a | RegValue) ); - - /* Unlatch all Rx status bits and clear Rx status IRQ Pending */ - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); - - /* Transmit mode Register (TMR) - * - * <15..13> 000 encoding - * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) - * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC) - * <9> 0 1 = Tx CRC Enabled - * <8> 0 1 = Append CRC to end of transmit frame - * <7..6> 00 Transmit parity Even - * <5> 0 Transmit parity Disabled - * <4..2> 000 Tx Char Length = 8 bits - * <1..0> 00 Disable Transmitter - * - * 0000 0100 0000 0000 = 0x0400 - */ - - RegValue = 0x0400; - - switch ( info->params.encoding ) { - case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; - case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; - case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break; - case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break; - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break; - } - - if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) - RegValue |= BIT9 + BIT8; - else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) - RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8); - - usc_OutReg( info, TMR, RegValue ); - - usc_set_txidle( info ); - - - usc_TCmd( info, TCmd_SelectTicrdma_level ); - - /* Transmit Interrupt Control Register (TICR) - * - * <15..8> ? Transmit FIFO DMA Level - * <7> 0 Present IA (Interrupt Arm) - * <6> 0 Idle Sent IA - * <5> 1 Abort Sent IA - * <4> 1 EOF/EOM Sent IA - * <3> 0 CRC Sent IA - * <2> 1 1 = Wait for SW Trigger to Start Frame - * <1> 1 Tx Underrun IA - * <0> 0 TC0 constant on read back - * - * 0000 0000 0011 0110 = 0x0036 - */ - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - usc_OutReg( info, TICR, 0x0736 ); - else - usc_OutReg( info, TICR, 0x1436 ); - - usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); - - /* - ** Transmit Command/Status Register (TCSR) - ** - ** <15..12> 0000 TCmd - ** <11> 0/1 UnderWait - ** <10..08> 000 TxIdle - ** <7> x PreSent - ** <6> x IdleSent - ** <5> x AbortSent - ** <4> x EOF/EOM Sent - ** <3> x CRC Sent - ** <2> x All Sent - ** <1> x TxUnder - ** <0> x TxEmpty - ** - ** 0000 0000 0000 0000 = 0x0000 - */ - info->tcsr_value = 0; - - if ( !PreSL1660 ) - info->tcsr_value |= TCSR_UNDERWAIT; - - usc_OutReg( info, TCSR, info->tcsr_value ); - - /* Clock mode Control Register (CMCR) - * - * <15..14> 00 counter 1 Source = Disabled - * <13..12> 00 counter 0 Source = Disabled - * <11..10> 11 BRG1 Input is TxC Pin - * <9..8> 11 BRG0 Input is TxC Pin - * <7..6> 01 DPLL Input is BRG1 Output - * <5..3> XXX TxCLK comes from Port 0 - * <2..0> XXX RxCLK comes from Port 1 - * - * 0000 1111 0111 0111 = 0x0f77 - */ - - RegValue = 0x0f40; - - if ( info->params.flags & HDLC_FLAG_RXC_DPLL ) - RegValue |= 0x0003; /* RxCLK from DPLL */ - else if ( info->params.flags & HDLC_FLAG_RXC_BRG ) - RegValue |= 0x0004; /* RxCLK from BRG0 */ - else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN) - RegValue |= 0x0006; /* RxCLK from TXC Input */ - else - RegValue |= 0x0007; /* RxCLK from Port1 */ - - if ( info->params.flags & HDLC_FLAG_TXC_DPLL ) - RegValue |= 0x0018; /* TxCLK from DPLL */ - else if ( info->params.flags & HDLC_FLAG_TXC_BRG ) - RegValue |= 0x0020; /* TxCLK from BRG0 */ - else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN) - RegValue |= 0x0038; /* RxCLK from TXC Input */ - else - RegValue |= 0x0030; /* TxCLK from Port0 */ - - usc_OutReg( info, CMCR, RegValue ); - - - /* Hardware Configuration Register (HCR) - * - * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4 - * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div - * <12> 0 CVOK:0=report code violation in biphase - * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4 - * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level - * <7..6> 00 reserved - * <5> 0 BRG1 mode:0=continuous,1=single cycle - * <4> X BRG1 Enable - * <3..2> 00 reserved - * <1> 0 BRG0 mode:0=continuous,1=single cycle - * <0> 0 BRG0 Enable - */ - - RegValue = 0x0000; - - if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) { - u32 XtalSpeed; - u32 DpllDivisor; - u16 Tc; - - /* DPLL is enabled. Use BRG1 to provide continuous reference clock */ - /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */ - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - XtalSpeed = 11059200; - else - XtalSpeed = 14745600; - - if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { - DpllDivisor = 16; - RegValue |= BIT10; - } - else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { - DpllDivisor = 8; - RegValue |= BIT11; - } - else - DpllDivisor = 32; - - /* Tc = (Xtal/Speed) - 1 */ - /* If twice the remainder of (Xtal/Speed) is greater than Speed */ - /* then rounding up gives a more precise time constant. Instead */ - /* of rounding up and then subtracting 1 we just don't subtract */ - /* the one in this case. */ - - /*-------------------------------------------------- - * ejz: for DPLL mode, application should use the - * same clock speed as the partner system, even - * though clocking is derived from the input RxData. - * In case the user uses a 0 for the clock speed, - * default to 0xffffffff and don't try to divide by - * zero - *--------------------------------------------------*/ - if ( info->params.clock_speed ) - { - Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed); - if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2) - / info->params.clock_speed) ) - Tc--; - } - else - Tc = -1; - - - /* Write 16-bit Time Constant for BRG1 */ - usc_OutReg( info, TC1R, Tc ); - - RegValue |= BIT4; /* enable BRG1 */ - - switch ( info->params.encoding ) { - case HDLC_ENCODING_NRZ: - case HDLC_ENCODING_NRZB: - case HDLC_ENCODING_NRZI_MARK: - case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break; - case HDLC_ENCODING_BIPHASE_MARK: - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break; - case HDLC_ENCODING_BIPHASE_LEVEL: - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break; - } - } - - usc_OutReg( info, HCR, RegValue ); - - - /* Channel Control/status Register (CCSR) - * - * <15> X RCC FIFO Overflow status (RO) - * <14> X RCC FIFO Not Empty status (RO) - * <13> 0 1 = Clear RCC FIFO (WO) - * <12> X DPLL Sync (RW) - * <11> X DPLL 2 Missed Clocks status (RO) - * <10> X DPLL 1 Missed Clock status (RO) - * <9..8> 00 DPLL Resync on rising and falling edges (RW) - * <7> X SDLC Loop On status (RO) - * <6> X SDLC Loop Send status (RO) - * <5> 1 Bypass counters for TxClk and RxClk (RW) - * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) - * <1..0> 00 reserved - * - * 0000 0000 0010 0000 = 0x0020 - */ - - usc_OutReg( info, CCSR, 0x1020 ); - - - if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) { - usc_OutReg( info, SICR, - (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) ); - } - - - /* enable Master Interrupt Enable bit (MIE) */ - usc_EnableMasterIrqBit( info ); - - usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA + - TRANSMIT_STATUS + TRANSMIT_DATA + MISC); - - /* arm RCC underflow interrupt */ - usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3)); - usc_EnableInterrupts(info, MISC); - - info->mbre_bit = 0; - outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ - usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ - info->mbre_bit = BIT8; - outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */ - - if (info->bus_type == MGSL_BUS_TYPE_ISA) { - /* Enable DMAEN (Port 7, Bit 14) */ - /* This connects the DMA request signal to the ISA bus */ - usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14)); - } - - /* DMA Control Register (DCR) - * - * <15..14> 10 Priority mode = Alternating Tx/Rx - * 01 Rx has priority - * 00 Tx has priority - * - * <13> 1 Enable Priority Preempt per DCR<15..14> - * (WARNING DCR<11..10> must be 00 when this is 1) - * 0 Choose activate channel per DCR<11..10> - * - * <12> 0 Little Endian for Array/List - * <11..10> 00 Both Channels can use each bus grant - * <9..6> 0000 reserved - * <5> 0 7 CLK - Minimum Bus Re-request Interval - * <4> 0 1 = drive D/C and S/D pins - * <3> 1 1 = Add one wait state to all DMA cycles. - * <2> 0 1 = Strobe /UAS on every transfer. - * <1..0> 11 Addr incrementing only affects LS24 bits - * - * 0110 0000 0000 1011 = 0x600b - */ - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - /* PCI adapter does not need DMA wait state */ - usc_OutDmaReg( info, DCR, 0xa00b ); - } - else - usc_OutDmaReg( info, DCR, 0x800b ); - - - /* Receive DMA mode Register (RDMR) - * - * <15..14> 11 DMA mode = Linked List Buffer mode - * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry - * <12> 1 Clear count of List Entry after fetching - * <11..10> 00 Address mode = Increment - * <9> 1 Terminate Buffer on RxBound - * <8> 0 Bus Width = 16bits - * <7..0> ? status Bits (write as 0s) - * - * 1111 0010 0000 0000 = 0xf200 - */ - - usc_OutDmaReg( info, RDMR, 0xf200 ); - - - /* Transmit DMA mode Register (TDMR) - * - * <15..14> 11 DMA mode = Linked List Buffer mode - * <13> 1 TCBinA/L = fetch Tx Control Block from List entry - * <12> 1 Clear count of List Entry after fetching - * <11..10> 00 Address mode = Increment - * <9> 1 Terminate Buffer on end of frame - * <8> 0 Bus Width = 16bits - * <7..0> ? status Bits (Read Only so write as 0) - * - * 1111 0010 0000 0000 = 0xf200 - */ - - usc_OutDmaReg( info, TDMR, 0xf200 ); - - - /* DMA Interrupt Control Register (DICR) - * - * <15> 1 DMA Interrupt Enable - * <14> 0 1 = Disable IEO from USC - * <13> 0 1 = Don't provide vector during IntAck - * <12> 1 1 = Include status in Vector - * <10..2> 0 reserved, Must be 0s - * <1> 0 1 = Rx DMA Interrupt Enabled - * <0> 0 1 = Tx DMA Interrupt Enabled - * - * 1001 0000 0000 0000 = 0x9000 - */ - - usc_OutDmaReg( info, DICR, 0x9000 ); - - usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */ - usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */ - usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */ - - /* Channel Control Register (CCR) - * - * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs) - * <13> 0 Trigger Tx on SW Command Disabled - * <12> 0 Flag Preamble Disabled - * <11..10> 00 Preamble Length - * <9..8> 00 Preamble Pattern - * <7..6> 10 Use 32-bit Rx status Blocks (RSBs) - * <5> 0 Trigger Rx on SW Command Disabled - * <4..0> 0 reserved - * - * 1000 0000 1000 0000 = 0x8080 - */ - - RegValue = 0x8080; - - switch ( info->params.preamble_length ) { - case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break; - case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break; - case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break; - } - - switch ( info->params.preamble ) { - case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break; - case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break; - case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break; - case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break; - } - - usc_OutReg( info, CCR, RegValue ); - - - /* - * Burst/Dwell Control Register - * - * <15..8> 0x20 Maximum number of transfers per bus grant - * <7..0> 0x00 Maximum number of clock cycles per bus grant - */ - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - /* don't limit bus occupancy on PCI adapter */ - usc_OutDmaReg( info, BDCR, 0x0000 ); - } - else - usc_OutDmaReg( info, BDCR, 0x2000 ); - - usc_stop_transmitter(info); - usc_stop_receiver(info); - -} /* end of usc_set_sdlc_mode() */ - -/* usc_enable_loopback() - * - * Set the 16C32 for internal loopback mode. - * The TxCLK and RxCLK signals are generated from the BRG0 and - * the TxD is looped back to the RxD internally. - * - * Arguments: info pointer to device instance data - * enable 1 = enable loopback, 0 = disable - * Return Value: None - */ -static void usc_enable_loopback(struct mgsl_struct *info, int enable) -{ - if (enable) { - /* blank external TXD output */ - usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6)); - - /* Clock mode Control Register (CMCR) - * - * <15..14> 00 counter 1 Disabled - * <13..12> 00 counter 0 Disabled - * <11..10> 11 BRG1 Input is TxC Pin - * <9..8> 11 BRG0 Input is TxC Pin - * <7..6> 01 DPLL Input is BRG1 Output - * <5..3> 100 TxCLK comes from BRG0 - * <2..0> 100 RxCLK comes from BRG0 - * - * 0000 1111 0110 0100 = 0x0f64 - */ - - usc_OutReg( info, CMCR, 0x0f64 ); - - /* Write 16-bit Time Constant for BRG0 */ - /* use clock speed if available, otherwise use 8 for diagnostics */ - if (info->params.clock_speed) { - if (info->bus_type == MGSL_BUS_TYPE_PCI) - usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1)); - else - usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1)); - } else - usc_OutReg(info, TC0R, (u16)8); - - /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0 - mode = Continuous Set Bit 0 to enable BRG0. */ - usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); - - /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ - usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004)); - - /* set Internal Data loopback mode */ - info->loopback_bits = 0x300; - outw( 0x0300, info->io_base + CCAR ); - } else { - /* enable external TXD output */ - usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6)); - - /* clear Internal Data loopback mode */ - info->loopback_bits = 0; - outw( 0,info->io_base + CCAR ); - } - -} /* end of usc_enable_loopback() */ - -/* usc_enable_aux_clock() - * - * Enabled the AUX clock output at the specified frequency. - * - * Arguments: - * - * info pointer to device extension - * data_rate data rate of clock in bits per second - * A data rate of 0 disables the AUX clock. - * - * Return Value: None - */ -static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate ) -{ - u32 XtalSpeed; - u16 Tc; - - if ( data_rate ) { - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - XtalSpeed = 11059200; - else - XtalSpeed = 14745600; - - - /* Tc = (Xtal/Speed) - 1 */ - /* If twice the remainder of (Xtal/Speed) is greater than Speed */ - /* then rounding up gives a more precise time constant. Instead */ - /* of rounding up and then subtracting 1 we just don't subtract */ - /* the one in this case. */ - - - Tc = (u16)(XtalSpeed/data_rate); - if ( !(((XtalSpeed % data_rate) * 2) / data_rate) ) - Tc--; - - /* Write 16-bit Time Constant for BRG0 */ - usc_OutReg( info, TC0R, Tc ); - - /* - * Hardware Configuration Register (HCR) - * Clear Bit 1, BRG0 mode = Continuous - * Set Bit 0 to enable BRG0. - */ - - usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); - - /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ - usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); - } else { - /* data rate == 0 so turn off BRG0 */ - usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); - } - -} /* end of usc_enable_aux_clock() */ - -/* - * - * usc_process_rxoverrun_sync() - * - * This function processes a receive overrun by resetting the - * receive DMA buffers and issuing a Purge Rx FIFO command - * to allow the receiver to continue receiving. - * - * Arguments: - * - * info pointer to device extension - * - * Return Value: None - */ -static void usc_process_rxoverrun_sync( struct mgsl_struct *info ) -{ - int start_index; - int end_index; - int frame_start_index; - bool start_of_frame_found = false; - bool end_of_frame_found = false; - bool reprogram_dma = false; - - DMABUFFERENTRY *buffer_list = info->rx_buffer_list; - u32 phys_addr; - - usc_DmaCmd( info, DmaCmd_PauseRxChannel ); - usc_RCmd( info, RCmd_EnterHuntmode ); - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - - /* CurrentRxBuffer points to the 1st buffer of the next */ - /* possibly available receive frame. */ - - frame_start_index = start_index = end_index = info->current_rx_buffer; - - /* Search for an unfinished string of buffers. This means */ - /* that a receive frame started (at least one buffer with */ - /* count set to zero) but there is no terminiting buffer */ - /* (status set to non-zero). */ - - while( !buffer_list[end_index].count ) - { - /* Count field has been reset to zero by 16C32. */ - /* This buffer is currently in use. */ - - if ( !start_of_frame_found ) - { - start_of_frame_found = true; - frame_start_index = end_index; - end_of_frame_found = false; - } - - if ( buffer_list[end_index].status ) - { - /* Status field has been set by 16C32. */ - /* This is the last buffer of a received frame. */ - - /* We want to leave the buffers for this frame intact. */ - /* Move on to next possible frame. */ - - start_of_frame_found = false; - end_of_frame_found = true; - } - - /* advance to next buffer entry in linked list */ - end_index++; - if ( end_index == info->rx_buffer_count ) - end_index = 0; - - if ( start_index == end_index ) - { - /* The entire list has been searched with all Counts == 0 and */ - /* all Status == 0. The receive buffers are */ - /* completely screwed, reset all receive buffers! */ - mgsl_reset_rx_dma_buffers( info ); - frame_start_index = 0; - start_of_frame_found = false; - reprogram_dma = true; - break; - } - } - - if ( start_of_frame_found && !end_of_frame_found ) - { - /* There is an unfinished string of receive DMA buffers */ - /* as a result of the receiver overrun. */ - - /* Reset the buffers for the unfinished frame */ - /* and reprogram the receive DMA controller to start */ - /* at the 1st buffer of unfinished frame. */ - - start_index = frame_start_index; - - do - { - *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE; - - /* Adjust index for wrap around. */ - if ( start_index == info->rx_buffer_count ) - start_index = 0; - - } while( start_index != end_index ); - - reprogram_dma = true; - } - - if ( reprogram_dma ) - { - usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); - usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS); - usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS); - - usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); - - /* This empties the receive FIFO and loads the RCC with RCLR */ - usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); - - /* program 16C32 with physical address of 1st DMA buffer entry */ - phys_addr = info->rx_buffer_list[frame_start_index].phys_entry; - usc_OutDmaReg( info, NRARL, (u16)phys_addr ); - usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); - usc_EnableInterrupts( info, RECEIVE_STATUS ); - - /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ - /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ - - usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 ); - usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); - usc_DmaCmd( info, DmaCmd_InitRxChannel ); - if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) - usc_EnableReceiver(info,ENABLE_AUTO_DCD); - else - usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); - } - else - { - /* This empties the receive FIFO and loads the RCC with RCLR */ - usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - } - -} /* end of usc_process_rxoverrun_sync() */ - -/* usc_stop_receiver() - * - * Disable USC receiver - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_stop_receiver( struct mgsl_struct *info ) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):usc_stop_receiver(%s)\n", - __FILE__,__LINE__, info->device_name ); - - /* Disable receive DMA channel. */ - /* This also disables receive DMA channel interrupts */ - usc_DmaCmd( info, DmaCmd_ResetRxChannel ); - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); - usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS ); - - usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); - - /* This empties the receive FIFO and loads the RCC with RCLR */ - usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - - info->rx_enabled = false; - info->rx_overflow = false; - info->rx_rcc_underrun = false; - -} /* end of stop_receiver() */ - -/* usc_start_receiver() - * - * Enable the USC receiver - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_start_receiver( struct mgsl_struct *info ) -{ - u32 phys_addr; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):usc_start_receiver(%s)\n", - __FILE__,__LINE__, info->device_name ); - - mgsl_reset_rx_dma_buffers( info ); - usc_stop_receiver( info ); - - usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - /* DMA mode Transfers */ - /* Program the DMA controller. */ - /* Enable the DMA controller end of buffer interrupt. */ - - /* program 16C32 with physical address of 1st DMA buffer entry */ - phys_addr = info->rx_buffer_list[0].phys_entry; - usc_OutDmaReg( info, NRARL, (u16)phys_addr ); - usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); - usc_EnableInterrupts( info, RECEIVE_STATUS ); - - /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ - /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ - - usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 ); - usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); - usc_DmaCmd( info, DmaCmd_InitRxChannel ); - if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) - usc_EnableReceiver(info,ENABLE_AUTO_DCD); - else - usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); - } else { - usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); - usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS); - usc_EnableInterrupts(info, RECEIVE_DATA); - - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - usc_RCmd( info, RCmd_EnterHuntmode ); - - usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); - } - - usc_OutReg( info, CCSR, 0x1020 ); - - info->rx_enabled = true; - -} /* end of usc_start_receiver() */ - -/* usc_start_transmitter() - * - * Enable the USC transmitter and send a transmit frame if - * one is loaded in the DMA buffers. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_start_transmitter( struct mgsl_struct *info ) -{ - u32 phys_addr; - unsigned int FrameSize; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):usc_start_transmitter(%s)\n", - __FILE__,__LINE__, info->device_name ); - - if ( info->xmit_cnt ) { - - /* If auto RTS enabled and RTS is inactive, then assert */ - /* RTS and set a flag indicating that the driver should */ - /* negate RTS when the transmission completes. */ - - info->drop_rts_on_tx_done = false; - - if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { - usc_get_serial_signals( info ); - if ( !(info->serial_signals & SerialSignal_RTS) ) { - info->serial_signals |= SerialSignal_RTS; - usc_set_serial_signals( info ); - info->drop_rts_on_tx_done = true; - } - } - - - if ( info->params.mode == MGSL_MODE_ASYNC ) { - if ( !info->tx_active ) { - usc_UnlatchTxstatusBits(info, TXSTATUS_ALL); - usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA); - usc_EnableInterrupts(info, TRANSMIT_DATA); - usc_load_txfifo(info); - } - } else { - /* Disable transmit DMA controller while programming. */ - usc_DmaCmd( info, DmaCmd_ResetTxChannel ); - - /* Transmit DMA buffer is loaded, so program USC */ - /* to send the frame contained in the buffers. */ - - FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc; - - /* if operating in Raw sync mode, reset the rcc component - * of the tx dma buffer entry, otherwise, the serial controller - * will send a closing sync char after this count. - */ - if ( info->params.mode == MGSL_MODE_RAW ) - info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0; - - /* Program the Transmit Character Length Register (TCLR) */ - /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ - usc_OutReg( info, TCLR, (u16)FrameSize ); - - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - - /* Program the address of the 1st DMA Buffer Entry in linked list */ - phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry; - usc_OutDmaReg( info, NTARL, (u16)phys_addr ); - usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) ); - - usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); - usc_EnableInterrupts( info, TRANSMIT_STATUS ); - - if ( info->params.mode == MGSL_MODE_RAW && - info->num_tx_dma_buffers > 1 ) { - /* When running external sync mode, attempt to 'stream' transmit */ - /* by filling tx dma buffers as they become available. To do this */ - /* we need to enable Tx DMA EOB Status interrupts : */ - /* */ - /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */ - /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */ - - usc_OutDmaReg( info, TDIAR, BIT2|BIT3 ); - usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) ); - } - - /* Initialize Transmit DMA Channel */ - usc_DmaCmd( info, DmaCmd_InitTxChannel ); - - usc_TCmd( info, TCmd_SendFrame ); - - mod_timer(&info->tx_timer, jiffies + - msecs_to_jiffies(5000)); - } - info->tx_active = true; - } - - if ( !info->tx_enabled ) { - info->tx_enabled = true; - if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) - usc_EnableTransmitter(info,ENABLE_AUTO_CTS); - else - usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); - } - -} /* end of usc_start_transmitter() */ - -/* usc_stop_transmitter() - * - * Stops the transmitter and DMA - * - * Arguments: info pointer to device isntance data - * Return Value: None - */ -static void usc_stop_transmitter( struct mgsl_struct *info ) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):usc_stop_transmitter(%s)\n", - __FILE__,__LINE__, info->device_name ); - - del_timer(&info->tx_timer); - - usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA ); - usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA ); - - usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL); - usc_DmaCmd( info, DmaCmd_ResetTxChannel ); - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - - info->tx_enabled = false; - info->tx_active = false; - -} /* end of usc_stop_transmitter() */ - -/* usc_load_txfifo() - * - * Fill the transmit FIFO until the FIFO is full or - * there is no more data to load. - * - * Arguments: info pointer to device extension (instance data) - * Return Value: None - */ -static void usc_load_txfifo( struct mgsl_struct *info ) -{ - int Fifocount; - u8 TwoBytes[2]; - - if ( !info->xmit_cnt && !info->x_char ) - return; - - /* Select transmit FIFO status readback in TICR */ - usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); - - /* load the Transmit FIFO until FIFOs full or all data sent */ - - while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) { - /* there is more space in the transmit FIFO and */ - /* there is more data in transmit buffer */ - - if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) { - /* write a 16-bit word from transmit buffer to 16C32 */ - - TwoBytes[0] = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - TwoBytes[1] = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - - outw( *((u16 *)TwoBytes), info->io_base + DATAREG); - - info->xmit_cnt -= 2; - info->icount.tx += 2; - } else { - /* only 1 byte left to transmit or 1 FIFO slot left */ - - outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY), - info->io_base + CCAR ); - - if (info->x_char) { - /* transmit pending high priority char */ - outw( info->x_char,info->io_base + CCAR ); - info->x_char = 0; - } else { - outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR ); - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - } - info->icount.tx++; - } - } - -} /* end of usc_load_txfifo() */ - -/* usc_reset() - * - * Reset the adapter to a known state and prepare it for further use. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_reset( struct mgsl_struct *info ) -{ - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - int i; - u32 readval; - - /* Set BIT30 of Misc Control Register */ - /* (Local Control Register 0x50) to force reset of USC. */ - - volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); - u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28); - - info->misc_ctrl_value |= BIT30; - *MiscCtrl = info->misc_ctrl_value; - - /* - * Force at least 170ns delay before clearing - * reset bit. Each read from LCR takes at least - * 30ns so 10 times for 300ns to be safe. - */ - for(i=0;i<10;i++) - readval = *MiscCtrl; - - info->misc_ctrl_value &= ~BIT30; - *MiscCtrl = info->misc_ctrl_value; - - *LCR0BRDR = BUS_DESCRIPTOR( - 1, // Write Strobe Hold (0-3) - 2, // Write Strobe Delay (0-3) - 2, // Read Strobe Delay (0-3) - 0, // NWDD (Write data-data) (0-3) - 4, // NWAD (Write Addr-data) (0-31) - 0, // NXDA (Read/Write Data-Addr) (0-3) - 0, // NRDD (Read Data-Data) (0-3) - 5 // NRAD (Read Addr-Data) (0-31) - ); - } else { - /* do HW reset */ - outb( 0,info->io_base + 8 ); - } - - info->mbre_bit = 0; - info->loopback_bits = 0; - info->usc_idle_mode = 0; - - /* - * Program the Bus Configuration Register (BCR) - * - * <15> 0 Don't use separate address - * <14..6> 0 reserved - * <5..4> 00 IAckmode = Default, don't care - * <3> 1 Bus Request Totem Pole output - * <2> 1 Use 16 Bit data bus - * <1> 0 IRQ Totem Pole output - * <0> 0 Don't Shift Right Addr - * - * 0000 0000 0000 1100 = 0x000c - * - * By writing to io_base + SDPIN the Wait/Ack pin is - * programmed to work as a Wait pin. - */ - - outw( 0x000c,info->io_base + SDPIN ); - - - outw( 0,info->io_base ); - outw( 0,info->io_base + CCAR ); - - /* select little endian byte ordering */ - usc_RTCmd( info, RTCmd_SelectLittleEndian ); - - - /* Port Control Register (PCR) - * - * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled) - * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled) - * <11..10> 00 Port 5 is Input (No Connect, Don't Care) - * <9..8> 00 Port 4 is Input (No Connect, Don't Care) - * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled ) - * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled ) - * <3..2> 01 Port 1 is Input (Dedicated RxC) - * <1..0> 01 Port 0 is Input (Dedicated TxC) - * - * 1111 0000 1111 0101 = 0xf0f5 - */ - - usc_OutReg( info, PCR, 0xf0f5 ); - - - /* - * Input/Output Control Register - * - * <15..14> 00 CTS is active low input - * <13..12> 00 DCD is active low input - * <11..10> 00 TxREQ pin is input (DSR) - * <9..8> 00 RxREQ pin is input (RI) - * <7..6> 00 TxD is output (Transmit Data) - * <5..3> 000 TxC Pin in Input (14.7456MHz Clock) - * <2..0> 100 RxC is Output (drive with BRG0) - * - * 0000 0000 0000 0100 = 0x0004 - */ - - usc_OutReg( info, IOCR, 0x0004 ); - -} /* end of usc_reset() */ - -/* usc_set_async_mode() - * - * Program adapter for asynchronous communications. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_set_async_mode( struct mgsl_struct *info ) -{ - u16 RegValue; - - /* disable interrupts while programming USC */ - usc_DisableMasterIrqBit( info ); - - outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ - usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ - - usc_loopback_frame( info ); - - /* Channel mode Register (CMR) - * - * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit - * <13..12> 00 00 = 16X Clock - * <11..8> 0000 Transmitter mode = Asynchronous - * <7..6> 00 reserved? - * <5..4> 00 Rx Sub modes, 00 = 16X Clock - * <3..0> 0000 Receiver mode = Asynchronous - * - * 0000 0000 0000 0000 = 0x0 - */ - - RegValue = 0; - if ( info->params.stop_bits != 1 ) - RegValue |= BIT14; - usc_OutReg( info, CMR, RegValue ); - - - /* Receiver mode Register (RMR) - * - * <15..13> 000 encoding = None - * <12..08> 00000 reserved (Sync Only) - * <7..6> 00 Even parity - * <5> 0 parity disabled - * <4..2> 000 Receive Char Length = 8 bits - * <1..0> 00 Disable Receiver - * - * 0000 0000 0000 0000 = 0x0 - */ - - RegValue = 0; - - if ( info->params.data_bits != 8 ) - RegValue |= BIT4+BIT3+BIT2; - - if ( info->params.parity != ASYNC_PARITY_NONE ) { - RegValue |= BIT5; - if ( info->params.parity != ASYNC_PARITY_ODD ) - RegValue |= BIT6; - } - - usc_OutReg( info, RMR, RegValue ); - - - /* Set IRQ trigger level */ - - usc_RCmd( info, RCmd_SelectRicrIntLevel ); - - - /* Receive Interrupt Control Register (RICR) - * - * <15..8> ? RxFIFO IRQ Request Level - * - * Note: For async mode the receive FIFO level must be set - * to 0 to avoid the situation where the FIFO contains fewer bytes - * than the trigger level and no more data is expected. - * - * <7> 0 Exited Hunt IA (Interrupt Arm) - * <6> 0 Idle Received IA - * <5> 0 Break/Abort IA - * <4> 0 Rx Bound IA - * <3> 0 Queued status reflects oldest byte in FIFO - * <2> 0 Abort/PE IA - * <1> 0 Rx Overrun IA - * <0> 0 Select TC0 value for readback - * - * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB) - */ - - usc_OutReg( info, RICR, 0x0000 ); - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); - - - /* Transmit mode Register (TMR) - * - * <15..13> 000 encoding = None - * <12..08> 00000 reserved (Sync Only) - * <7..6> 00 Transmit parity Even - * <5> 0 Transmit parity Disabled - * <4..2> 000 Tx Char Length = 8 bits - * <1..0> 00 Disable Transmitter - * - * 0000 0000 0000 0000 = 0x0 - */ - - RegValue = 0; - - if ( info->params.data_bits != 8 ) - RegValue |= BIT4+BIT3+BIT2; - - if ( info->params.parity != ASYNC_PARITY_NONE ) { - RegValue |= BIT5; - if ( info->params.parity != ASYNC_PARITY_ODD ) - RegValue |= BIT6; - } - - usc_OutReg( info, TMR, RegValue ); - - usc_set_txidle( info ); - - - /* Set IRQ trigger level */ - - usc_TCmd( info, TCmd_SelectTicrIntLevel ); - - - /* Transmit Interrupt Control Register (TICR) - * - * <15..8> ? Transmit FIFO IRQ Level - * <7> 0 Present IA (Interrupt Arm) - * <6> 1 Idle Sent IA - * <5> 0 Abort Sent IA - * <4> 0 EOF/EOM Sent IA - * <3> 0 CRC Sent IA - * <2> 0 1 = Wait for SW Trigger to Start Frame - * <1> 0 Tx Underrun IA - * <0> 0 TC0 constant on read back - * - * 0000 0000 0100 0000 = 0x0040 - */ - - usc_OutReg( info, TICR, 0x1f40 ); - - usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); - - usc_enable_async_clock( info, info->params.data_rate ); - - - /* Channel Control/status Register (CCSR) - * - * <15> X RCC FIFO Overflow status (RO) - * <14> X RCC FIFO Not Empty status (RO) - * <13> 0 1 = Clear RCC FIFO (WO) - * <12> X DPLL in Sync status (RO) - * <11> X DPLL 2 Missed Clocks status (RO) - * <10> X DPLL 1 Missed Clock status (RO) - * <9..8> 00 DPLL Resync on rising and falling edges (RW) - * <7> X SDLC Loop On status (RO) - * <6> X SDLC Loop Send status (RO) - * <5> 1 Bypass counters for TxClk and RxClk (RW) - * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) - * <1..0> 00 reserved - * - * 0000 0000 0010 0000 = 0x0020 - */ - - usc_OutReg( info, CCSR, 0x0020 ); - - usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA + - RECEIVE_DATA + RECEIVE_STATUS ); - - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA + - RECEIVE_DATA + RECEIVE_STATUS ); - - usc_EnableMasterIrqBit( info ); - - if (info->bus_type == MGSL_BUS_TYPE_ISA) { - /* Enable INTEN (Port 6, Bit12) */ - /* This connects the IRQ request signal to the ISA bus */ - usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); - } - - if (info->params.loopback) { - info->loopback_bits = 0x300; - outw(0x0300, info->io_base + CCAR); - } - -} /* end of usc_set_async_mode() */ - -/* usc_loopback_frame() - * - * Loop back a small (2 byte) dummy SDLC frame. - * Interrupts and DMA are NOT used. The purpose of this is to - * clear any 'stale' status info left over from running in async mode. - * - * The 16C32 shows the strange behaviour of marking the 1st - * received SDLC frame with a CRC error even when there is no - * CRC error. To get around this a small dummy from of 2 bytes - * is looped back when switching from async to sync mode. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_loopback_frame( struct mgsl_struct *info ) -{ - int i; - unsigned long oldmode = info->params.mode; - - info->params.mode = MGSL_MODE_HDLC; - - usc_DisableMasterIrqBit( info ); - - usc_set_sdlc_mode( info ); - usc_enable_loopback( info, 1 ); - - /* Write 16-bit Time Constant for BRG0 */ - usc_OutReg( info, TC0R, 0 ); - - /* Channel Control Register (CCR) - * - * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs) - * <13> 0 Trigger Tx on SW Command Disabled - * <12> 0 Flag Preamble Disabled - * <11..10> 00 Preamble Length = 8-Bits - * <9..8> 01 Preamble Pattern = flags - * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs) - * <5> 0 Trigger Rx on SW Command Disabled - * <4..0> 0 reserved - * - * 0000 0001 0000 0000 = 0x0100 - */ - - usc_OutReg( info, CCR, 0x0100 ); - - /* SETUP RECEIVER */ - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); - - /* SETUP TRANSMITTER */ - /* Program the Transmit Character Length Register (TCLR) */ - /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ - usc_OutReg( info, TCLR, 2 ); - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - - /* unlatch Tx status bits, and start transmit channel. */ - usc_UnlatchTxstatusBits(info,TXSTATUS_ALL); - outw(0,info->io_base + DATAREG); - - /* ENABLE TRANSMITTER */ - usc_TCmd( info, TCmd_SendFrame ); - usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); - - /* WAIT FOR RECEIVE COMPLETE */ - for (i=0 ; i<1000 ; i++) - if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1)) - break; - - /* clear Internal Data loopback mode */ - usc_enable_loopback(info, 0); - - usc_EnableMasterIrqBit(info); - - info->params.mode = oldmode; - -} /* end of usc_loopback_frame() */ - -/* usc_set_sync_mode() Programs the USC for SDLC communications. - * - * Arguments: info pointer to adapter info structure - * Return Value: None - */ -static void usc_set_sync_mode( struct mgsl_struct *info ) -{ - usc_loopback_frame( info ); - usc_set_sdlc_mode( info ); - - if (info->bus_type == MGSL_BUS_TYPE_ISA) { - /* Enable INTEN (Port 6, Bit12) */ - /* This connects the IRQ request signal to the ISA bus */ - usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); - } - - usc_enable_aux_clock(info, info->params.clock_speed); - - if (info->params.loopback) - usc_enable_loopback(info,1); - -} /* end of mgsl_set_sync_mode() */ - -/* usc_set_txidle() Set the HDLC idle mode for the transmitter. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_set_txidle( struct mgsl_struct *info ) -{ - u16 usc_idle_mode = IDLEMODE_FLAGS; - - /* Map API idle mode to USC register bits */ - - switch( info->idle_mode ){ - case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break; - case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break; - case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break; - case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break; - case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break; - case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break; - } - - info->usc_idle_mode = usc_idle_mode; - //usc_OutReg(info, TCSR, usc_idle_mode); - info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */ - info->tcsr_value += usc_idle_mode; - usc_OutReg(info, TCSR, info->tcsr_value); - - /* - * if SyncLink WAN adapter is running in external sync mode, the - * transmitter has been set to Monosync in order to try to mimic - * a true raw outbound bit stream. Monosync still sends an open/close - * sync char at the start/end of a frame. Try to match those sync - * patterns to the idle mode set here - */ - if ( info->params.mode == MGSL_MODE_RAW ) { - unsigned char syncpat = 0; - switch( info->idle_mode ) { - case HDLC_TXIDLE_FLAGS: - syncpat = 0x7e; - break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: - syncpat = 0x55; - break; - case HDLC_TXIDLE_ZEROS: - case HDLC_TXIDLE_SPACE: - syncpat = 0x00; - break; - case HDLC_TXIDLE_ONES: - case HDLC_TXIDLE_MARK: - syncpat = 0xff; - break; - case HDLC_TXIDLE_ALT_MARK_SPACE: - syncpat = 0xaa; - break; - } - - usc_SetTransmitSyncChars(info,syncpat,syncpat); - } - -} /* end of usc_set_txidle() */ - -/* usc_get_serial_signals() - * - * Query the adapter for the state of the V24 status (input) signals. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_get_serial_signals( struct mgsl_struct *info ) -{ - u16 status; - - /* clear all serial signals except DTR and RTS */ - info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; - - /* Read the Misc Interrupt status Register (MISR) to get */ - /* the V24 status signals. */ - - status = usc_InReg( info, MISR ); - - /* set serial signal bits to reflect MISR */ - - if ( status & MISCSTATUS_CTS ) - info->serial_signals |= SerialSignal_CTS; - - if ( status & MISCSTATUS_DCD ) - info->serial_signals |= SerialSignal_DCD; - - if ( status & MISCSTATUS_RI ) - info->serial_signals |= SerialSignal_RI; - - if ( status & MISCSTATUS_DSR ) - info->serial_signals |= SerialSignal_DSR; - -} /* end of usc_get_serial_signals() */ - -/* usc_set_serial_signals() - * - * Set the state of DTR and RTS based on contents of - * serial_signals member of device extension. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_set_serial_signals( struct mgsl_struct *info ) -{ - u16 Control; - unsigned char V24Out = info->serial_signals; - - /* get the current value of the Port Control Register (PCR) */ - - Control = usc_InReg( info, PCR ); - - if ( V24Out & SerialSignal_RTS ) - Control &= ~(BIT6); - else - Control |= BIT6; - - if ( V24Out & SerialSignal_DTR ) - Control &= ~(BIT4); - else - Control |= BIT4; - - usc_OutReg( info, PCR, Control ); - -} /* end of usc_set_serial_signals() */ - -/* usc_enable_async_clock() - * - * Enable the async clock at the specified frequency. - * - * Arguments: info pointer to device instance data - * data_rate data rate of clock in bps - * 0 disables the AUX clock. - * Return Value: None - */ -static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate ) -{ - if ( data_rate ) { - /* - * Clock mode Control Register (CMCR) - * - * <15..14> 00 counter 1 Disabled - * <13..12> 00 counter 0 Disabled - * <11..10> 11 BRG1 Input is TxC Pin - * <9..8> 11 BRG0 Input is TxC Pin - * <7..6> 01 DPLL Input is BRG1 Output - * <5..3> 100 TxCLK comes from BRG0 - * <2..0> 100 RxCLK comes from BRG0 - * - * 0000 1111 0110 0100 = 0x0f64 - */ - - usc_OutReg( info, CMCR, 0x0f64 ); - - - /* - * Write 16-bit Time Constant for BRG0 - * Time Constant = (ClkSpeed / data_rate) - 1 - * ClkSpeed = 921600 (ISA), 691200 (PCI) - */ - - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) ); - else - usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) ); - - - /* - * Hardware Configuration Register (HCR) - * Clear Bit 1, BRG0 mode = Continuous - * Set Bit 0 to enable BRG0. - */ - - usc_OutReg( info, HCR, - (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); - - - /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ - - usc_OutReg( info, IOCR, - (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); - } else { - /* data rate == 0 so turn off BRG0 */ - usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); - } - -} /* end of usc_enable_async_clock() */ - -/* - * Buffer Structures: - * - * Normal memory access uses virtual addresses that can make discontiguous - * physical memory pages appear to be contiguous in the virtual address - * space (the processors memory mapping handles the conversions). - * - * DMA transfers require physically contiguous memory. This is because - * the DMA system controller and DMA bus masters deal with memory using - * only physical addresses. - * - * This causes a problem under Windows NT when large DMA buffers are - * needed. Fragmentation of the nonpaged pool prevents allocations of - * physically contiguous buffers larger than the PAGE_SIZE. - * - * However the 16C32 supports Bus Master Scatter/Gather DMA which - * allows DMA transfers to physically discontiguous buffers. Information - * about each data transfer buffer is contained in a memory structure - * called a 'buffer entry'. A list of buffer entries is maintained - * to track and control the use of the data transfer buffers. - * - * To support this strategy we will allocate sufficient PAGE_SIZE - * contiguous memory buffers to allow for the total required buffer - * space. - * - * The 16C32 accesses the list of buffer entries using Bus Master - * DMA. Control information is read from the buffer entries by the - * 16C32 to control data transfers. status information is written to - * the buffer entries by the 16C32 to indicate the status of completed - * transfers. - * - * The CPU writes control information to the buffer entries to control - * the 16C32 and reads status information from the buffer entries to - * determine information about received and transmitted frames. - * - * Because the CPU and 16C32 (adapter) both need simultaneous access - * to the buffer entries, the buffer entry memory is allocated with - * HalAllocateCommonBuffer(). This restricts the size of the buffer - * entry list to PAGE_SIZE. - * - * The actual data buffers on the other hand will only be accessed - * by the CPU or the adapter but not by both simultaneously. This allows - * Scatter/Gather packet based DMA procedures for using physically - * discontiguous pages. - */ - -/* - * mgsl_reset_tx_dma_buffers() - * - * Set the count for all transmit buffers to 0 to indicate the - * buffer is available for use and set the current buffer to the - * first buffer. This effectively makes all buffers free and - * discards any data in buffers. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ) -{ - unsigned int i; - - for ( i = 0; i < info->tx_buffer_count; i++ ) { - *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0; - } - - info->current_tx_buffer = 0; - info->start_tx_dma_buffer = 0; - info->tx_dma_buffers_used = 0; - - info->get_tx_holding_index = 0; - info->put_tx_holding_index = 0; - info->tx_holding_count = 0; - -} /* end of mgsl_reset_tx_dma_buffers() */ - -/* - * num_free_tx_dma_buffers() - * - * returns the number of free tx dma buffers available - * - * Arguments: info pointer to device instance data - * Return Value: number of free tx dma buffers - */ -static int num_free_tx_dma_buffers(struct mgsl_struct *info) -{ - return info->tx_buffer_count - info->tx_dma_buffers_used; -} - -/* - * mgsl_reset_rx_dma_buffers() - * - * Set the count for all receive buffers to DMABUFFERSIZE - * and set the current buffer to the first buffer. This effectively - * makes all buffers free and discards any data in buffers. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ) -{ - unsigned int i; - - for ( i = 0; i < info->rx_buffer_count; i++ ) { - *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE; -// info->rx_buffer_list[i].count = DMABUFFERSIZE; -// info->rx_buffer_list[i].status = 0; - } - - info->current_rx_buffer = 0; - -} /* end of mgsl_reset_rx_dma_buffers() */ - -/* - * mgsl_free_rx_frame_buffers() - * - * Free the receive buffers used by a received SDLC - * frame such that the buffers can be reused. - * - * Arguments: - * - * info pointer to device instance data - * StartIndex index of 1st receive buffer of frame - * EndIndex index of last receive buffer of frame - * - * Return Value: None - */ -static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ) -{ - bool Done = false; - DMABUFFERENTRY *pBufEntry; - unsigned int Index; - - /* Starting with 1st buffer entry of the frame clear the status */ - /* field and set the count field to DMA Buffer Size. */ - - Index = StartIndex; - - while( !Done ) { - pBufEntry = &(info->rx_buffer_list[Index]); - - if ( Index == EndIndex ) { - /* This is the last buffer of the frame! */ - Done = true; - } - - /* reset current buffer for reuse */ -// pBufEntry->status = 0; -// pBufEntry->count = DMABUFFERSIZE; - *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE; - - /* advance to next buffer entry in linked list */ - Index++; - if ( Index == info->rx_buffer_count ) - Index = 0; - } - - /* set current buffer to next buffer after last buffer of frame */ - info->current_rx_buffer = Index; - -} /* end of free_rx_frame_buffers() */ - -/* mgsl_get_rx_frame() - * - * This function attempts to return a received SDLC frame from the - * receive DMA buffers. Only frames received without errors are returned. - * - * Arguments: info pointer to device extension - * Return Value: true if frame returned, otherwise false - */ -static bool mgsl_get_rx_frame(struct mgsl_struct *info) -{ - unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ - unsigned short status; - DMABUFFERENTRY *pBufEntry; - unsigned int framesize = 0; - bool ReturnCode = false; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - bool return_frame = false; - - /* - * current_rx_buffer points to the 1st buffer of the next available - * receive frame. To find the last buffer of the frame look for - * a non-zero status field in the buffer entries. (The status - * field is set by the 16C32 after completing a receive frame. - */ - - StartIndex = EndIndex = info->current_rx_buffer; - - while( !info->rx_buffer_list[EndIndex].status ) { - /* - * If the count field of the buffer entry is non-zero then - * this buffer has not been used. (The 16C32 clears the count - * field when it starts using the buffer.) If an unused buffer - * is encountered then there are no frames available. - */ - - if ( info->rx_buffer_list[EndIndex].count ) - goto Cleanup; - - /* advance to next buffer entry in linked list */ - EndIndex++; - if ( EndIndex == info->rx_buffer_count ) - EndIndex = 0; - - /* if entire list searched then no frame available */ - if ( EndIndex == StartIndex ) { - /* If this occurs then something bad happened, - * all buffers have been 'used' but none mark - * the end of a frame. Reset buffers and receiver. - */ - - if ( info->rx_enabled ){ - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_start_receiver(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - goto Cleanup; - } - } - - - /* check status of receive frame */ - - status = info->rx_buffer_list[EndIndex].status; - - if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN + - RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) { - if ( status & RXSTATUS_SHORT_FRAME ) - info->icount.rxshort++; - else if ( status & RXSTATUS_ABORT ) - info->icount.rxabort++; - else if ( status & RXSTATUS_OVERRUN ) - info->icount.rxover++; - else { - info->icount.rxcrc++; - if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) - return_frame = true; - } - framesize = 0; -#if SYNCLINK_GENERIC_HDLC - { - info->netdev->stats.rx_errors++; - info->netdev->stats.rx_frame_errors++; - } -#endif - } else - return_frame = true; - - if ( return_frame ) { - /* receive frame has no errors, get frame size. - * The frame size is the starting value of the RCC (which was - * set to 0xffff) minus the ending value of the RCC (decremented - * once for each receive character) minus 2 for the 16-bit CRC. - */ - - framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc; - - /* adjust frame size for CRC if any */ - if ( info->params.crc_type == HDLC_CRC_16_CCITT ) - framesize -= 2; - else if ( info->params.crc_type == HDLC_CRC_32_CCITT ) - framesize -= 4; - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n", - __FILE__,__LINE__,info->device_name,status,framesize); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr, - min_t(int, framesize, DMABUFFERSIZE),0); - - if (framesize) { - if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) && - ((framesize+1) > info->max_frame_size) ) || - (framesize > info->max_frame_size) ) - info->icount.rxlong++; - else { - /* copy dma buffer(s) to contiguous intermediate buffer */ - int copy_count = framesize; - int index = StartIndex; - unsigned char *ptmp = info->intermediate_rxbuffer; - - if ( !(status & RXSTATUS_CRC_ERROR)) - info->icount.rxok++; - - while(copy_count) { - int partial_count; - if ( copy_count > DMABUFFERSIZE ) - partial_count = DMABUFFERSIZE; - else - partial_count = copy_count; - - pBufEntry = &(info->rx_buffer_list[index]); - memcpy( ptmp, pBufEntry->virt_addr, partial_count ); - ptmp += partial_count; - copy_count -= partial_count; - - if ( ++index == info->rx_buffer_count ) - index = 0; - } - - if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) { - ++framesize; - *ptmp = (status & RXSTATUS_CRC_ERROR ? - RX_CRC_ERROR : - RX_OK); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n", - __FILE__,__LINE__,info->device_name, - *ptmp); - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_rx(info,info->intermediate_rxbuffer,framesize); - else -#endif - ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); - } - } - /* Free the buffers used by this frame. */ - mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex ); - - ReturnCode = true; - -Cleanup: - - if ( info->rx_enabled && info->rx_overflow ) { - /* The receiver needs to restarted because of - * a receive overflow (buffer or FIFO). If the - * receive buffers are now empty, then restart receiver. - */ - - if ( !info->rx_buffer_list[EndIndex].status && - info->rx_buffer_list[EndIndex].count ) { - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_start_receiver(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - } - - return ReturnCode; - -} /* end of mgsl_get_rx_frame() */ - -/* mgsl_get_raw_rx_frame() - * - * This function attempts to return a received frame from the - * receive DMA buffers when running in external loop mode. In this mode, - * we will return at most one DMABUFFERSIZE frame to the application. - * The USC receiver is triggering off of DCD going active to start a new - * frame, and DCD going inactive to terminate the frame (similar to - * processing a closing flag character). - * - * In this routine, we will return DMABUFFERSIZE "chunks" at a time. - * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero - * status field and the RCC field will indicate the length of the - * entire received frame. We take this RCC field and get the modulus - * of RCC and DMABUFFERSIZE to determine if number of bytes in the - * last Rx DMA buffer and return that last portion of the frame. - * - * Arguments: info pointer to device extension - * Return Value: true if frame returned, otherwise false - */ -static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info) -{ - unsigned int CurrentIndex, NextIndex; - unsigned short status; - DMABUFFERENTRY *pBufEntry; - unsigned int framesize = 0; - bool ReturnCode = false; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - - /* - * current_rx_buffer points to the 1st buffer of the next available - * receive frame. The status field is set by the 16C32 after - * completing a receive frame. If the status field of this buffer - * is zero, either the USC is still filling this buffer or this - * is one of a series of buffers making up a received frame. - * - * If the count field of this buffer is zero, the USC is either - * using this buffer or has used this buffer. Look at the count - * field of the next buffer. If that next buffer's count is - * non-zero, the USC is still actively using the current buffer. - * Otherwise, if the next buffer's count field is zero, the - * current buffer is complete and the USC is using the next - * buffer. - */ - CurrentIndex = NextIndex = info->current_rx_buffer; - ++NextIndex; - if ( NextIndex == info->rx_buffer_count ) - NextIndex = 0; - - if ( info->rx_buffer_list[CurrentIndex].status != 0 || - (info->rx_buffer_list[CurrentIndex].count == 0 && - info->rx_buffer_list[NextIndex].count == 0)) { - /* - * Either the status field of this dma buffer is non-zero - * (indicating the last buffer of a receive frame) or the next - * buffer is marked as in use -- implying this buffer is complete - * and an intermediate buffer for this received frame. - */ - - status = info->rx_buffer_list[CurrentIndex].status; - - if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN + - RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) { - if ( status & RXSTATUS_SHORT_FRAME ) - info->icount.rxshort++; - else if ( status & RXSTATUS_ABORT ) - info->icount.rxabort++; - else if ( status & RXSTATUS_OVERRUN ) - info->icount.rxover++; - else - info->icount.rxcrc++; - framesize = 0; - } else { - /* - * A receive frame is available, get frame size and status. - * - * The frame size is the starting value of the RCC (which was - * set to 0xffff) minus the ending value of the RCC (decremented - * once for each receive character) minus 2 or 4 for the 16-bit - * or 32-bit CRC. - * - * If the status field is zero, this is an intermediate buffer. - * It's size is 4K. - * - * If the DMA Buffer Entry's Status field is non-zero, the - * receive operation completed normally (ie: DCD dropped). The - * RCC field is valid and holds the received frame size. - * It is possible that the RCC field will be zero on a DMA buffer - * entry with a non-zero status. This can occur if the total - * frame size (number of bytes between the time DCD goes active - * to the time DCD goes inactive) exceeds 65535 bytes. In this - * case the 16C32 has underrun on the RCC count and appears to - * stop updating this counter to let us know the actual received - * frame size. If this happens (non-zero status and zero RCC), - * simply return the entire RxDMA Buffer - */ - if ( status ) { - /* - * In the event that the final RxDMA Buffer is - * terminated with a non-zero status and the RCC - * field is zero, we interpret this as the RCC - * having underflowed (received frame > 65535 bytes). - * - * Signal the event to the user by passing back - * a status of RxStatus_CrcError returning the full - * buffer and let the app figure out what data is - * actually valid - */ - if ( info->rx_buffer_list[CurrentIndex].rcc ) - framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc; - else - framesize = DMABUFFERSIZE; - } - else - framesize = DMABUFFERSIZE; - } - - if ( framesize > DMABUFFERSIZE ) { - /* - * if running in raw sync mode, ISR handler for - * End Of Buffer events terminates all buffers at 4K. - * If this frame size is said to be >4K, get the - * actual number of bytes of the frame in this buffer. - */ - framesize = framesize % DMABUFFERSIZE; - } - - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n", - __FILE__,__LINE__,info->device_name,status,framesize); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr, - min_t(int, framesize, DMABUFFERSIZE),0); - - if (framesize) { - /* copy dma buffer(s) to contiguous intermediate buffer */ - /* NOTE: we never copy more than DMABUFFERSIZE bytes */ - - pBufEntry = &(info->rx_buffer_list[CurrentIndex]); - memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize); - info->icount.rxok++; - - ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); - } - - /* Free the buffers used by this frame. */ - mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex ); - - ReturnCode = true; - } - - - if ( info->rx_enabled && info->rx_overflow ) { - /* The receiver needs to restarted because of - * a receive overflow (buffer or FIFO). If the - * receive buffers are now empty, then restart receiver. - */ - - if ( !info->rx_buffer_list[CurrentIndex].status && - info->rx_buffer_list[CurrentIndex].count ) { - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_start_receiver(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - } - - return ReturnCode; - -} /* end of mgsl_get_raw_rx_frame() */ - -/* mgsl_load_tx_dma_buffer() - * - * Load the transmit DMA buffer with the specified data. - * - * Arguments: - * - * info pointer to device extension - * Buffer pointer to buffer containing frame to load - * BufferSize size in bytes of frame in Buffer - * - * Return Value: None - */ -static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info, - const char *Buffer, unsigned int BufferSize) -{ - unsigned short Copycount; - unsigned int i = 0; - DMABUFFERENTRY *pBufEntry; - - if ( debug_level >= DEBUG_LEVEL_DATA ) - mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1); - - if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { - /* set CMR:13 to start transmit when - * next GoAhead (abort) is received - */ - info->cmr_value |= BIT13; - } - - /* begin loading the frame in the next available tx dma - * buffer, remember it's starting location for setting - * up tx dma operation - */ - i = info->current_tx_buffer; - info->start_tx_dma_buffer = i; - - /* Setup the status and RCC (Frame Size) fields of the 1st */ - /* buffer entry in the transmit DMA buffer list. */ - - info->tx_buffer_list[i].status = info->cmr_value & 0xf000; - info->tx_buffer_list[i].rcc = BufferSize; - info->tx_buffer_list[i].count = BufferSize; - - /* Copy frame data from 1st source buffer to the DMA buffers. */ - /* The frame data may span multiple DMA buffers. */ - - while( BufferSize ){ - /* Get a pointer to next DMA buffer entry. */ - pBufEntry = &info->tx_buffer_list[i++]; - - if ( i == info->tx_buffer_count ) - i=0; - - /* Calculate the number of bytes that can be copied from */ - /* the source buffer to this DMA buffer. */ - if ( BufferSize > DMABUFFERSIZE ) - Copycount = DMABUFFERSIZE; - else - Copycount = BufferSize; - - /* Actually copy data from source buffer to DMA buffer. */ - /* Also set the data count for this individual DMA buffer. */ - if ( info->bus_type == MGSL_BUS_TYPE_PCI ) - mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount); - else - memcpy(pBufEntry->virt_addr, Buffer, Copycount); - - pBufEntry->count = Copycount; - - /* Advance source pointer and reduce remaining data count. */ - Buffer += Copycount; - BufferSize -= Copycount; - - ++info->tx_dma_buffers_used; - } - - /* remember next available tx dma buffer */ - info->current_tx_buffer = i; - -} /* end of mgsl_load_tx_dma_buffer() */ - -/* - * mgsl_register_test() - * - * Performs a register test of the 16C32. - * - * Arguments: info pointer to device instance data - * Return Value: true if test passed, otherwise false - */ -static bool mgsl_register_test( struct mgsl_struct *info ) -{ - static unsigned short BitPatterns[] = - { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f }; - static unsigned int Patterncount = ARRAY_SIZE(BitPatterns); - unsigned int i; - bool rc = true; - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_reset(info); - - /* Verify the reset state of some registers. */ - - if ( (usc_InReg( info, SICR ) != 0) || - (usc_InReg( info, IVR ) != 0) || - (usc_InDmaReg( info, DIVR ) != 0) ){ - rc = false; - } - - if ( rc ){ - /* Write bit patterns to various registers but do it out of */ - /* sync, then read back and verify values. */ - - for ( i = 0 ; i < Patterncount ; i++ ) { - usc_OutReg( info, TC0R, BitPatterns[i] ); - usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] ); - usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] ); - usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] ); - usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] ); - usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] ); - - if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) || - (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) || - (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) || - (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) || - (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) || - (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){ - rc = false; - break; - } - } - } - - usc_reset(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return rc; - -} /* end of mgsl_register_test() */ - -/* mgsl_irq_test() Perform interrupt test of the 16C32. - * - * Arguments: info pointer to device instance data - * Return Value: true if test passed, otherwise false - */ -static bool mgsl_irq_test( struct mgsl_struct *info ) -{ - unsigned long EndTime; - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_reset(info); - - /* - * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition. - * The ISR sets irq_occurred to true. - */ - - info->irq_occurred = false; - - /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */ - /* Enable INTEN (Port 6, Bit12) */ - /* This connects the IRQ request signal to the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) ); - - usc_EnableMasterIrqBit(info); - usc_EnableInterrupts(info, IO_PIN); - usc_ClearIrqPendingBits(info, IO_PIN); - - usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED); - usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - EndTime=100; - while( EndTime-- && !info->irq_occurred ) { - msleep_interruptible(10); - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_reset(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return info->irq_occurred; - -} /* end of mgsl_irq_test() */ - -/* mgsl_dma_test() - * - * Perform a DMA test of the 16C32. A small frame is - * transmitted via DMA from a transmit buffer to a receive buffer - * using single buffer DMA mode. - * - * Arguments: info pointer to device instance data - * Return Value: true if test passed, otherwise false - */ -static bool mgsl_dma_test( struct mgsl_struct *info ) -{ - unsigned short FifoLevel; - unsigned long phys_addr; - unsigned int FrameSize; - unsigned int i; - char *TmpPtr; - bool rc = true; - unsigned short status=0; - unsigned long EndTime; - unsigned long flags; - MGSL_PARAMS tmp_params; - - /* save current port options */ - memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS)); - /* load default port options */ - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - -#define TESTFRAMESIZE 40 - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* setup 16C32 for SDLC DMA transfer mode */ - - usc_reset(info); - usc_set_sdlc_mode(info); - usc_enable_loopback(info,1); - - /* Reprogram the RDMR so that the 16C32 does NOT clear the count - * field of the buffer entry after fetching buffer address. This - * way we can detect a DMA failure for a DMA read (which should be - * non-destructive to system memory) before we try and write to - * memory (where a failure could corrupt system memory). - */ - - /* Receive DMA mode Register (RDMR) - * - * <15..14> 11 DMA mode = Linked List Buffer mode - * <13> 1 RSBinA/L = store Rx status Block in List entry - * <12> 0 1 = Clear count of List Entry after fetching - * <11..10> 00 Address mode = Increment - * <9> 1 Terminate Buffer on RxBound - * <8> 0 Bus Width = 16bits - * <7..0> ? status Bits (write as 0s) - * - * 1110 0010 0000 0000 = 0xe200 - */ - - usc_OutDmaReg( info, RDMR, 0xe200 ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */ - - FrameSize = TESTFRAMESIZE; - - /* setup 1st transmit buffer entry: */ - /* with frame size and transmit control word */ - - info->tx_buffer_list[0].count = FrameSize; - info->tx_buffer_list[0].rcc = FrameSize; - info->tx_buffer_list[0].status = 0x4000; - - /* build a transmit frame in 1st transmit DMA buffer */ - - TmpPtr = info->tx_buffer_list[0].virt_addr; - for (i = 0; i < FrameSize; i++ ) - *TmpPtr++ = i; - - /* setup 1st receive buffer entry: */ - /* clear status, set max receive buffer size */ - - info->rx_buffer_list[0].status = 0; - info->rx_buffer_list[0].count = FrameSize + 4; - - /* zero out the 1st receive buffer */ - - memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 ); - - /* Set count field of next buffer entries to prevent */ - /* 16C32 from using buffers after the 1st one. */ - - info->tx_buffer_list[1].count = 0; - info->rx_buffer_list[1].count = 0; - - - /***************************/ - /* Program 16C32 receiver. */ - /***************************/ - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* setup DMA transfers */ - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - - /* program 16C32 receiver with physical address of 1st DMA buffer entry */ - phys_addr = info->rx_buffer_list[0].phys_entry; - usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr ); - usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) ); - - /* Clear the Rx DMA status bits (read RDMR) and start channel */ - usc_InDmaReg( info, RDMR ); - usc_DmaCmd( info, DmaCmd_InitRxChannel ); - - /* Enable Receiver (RMR <1..0> = 10) */ - usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - /*************************************************************/ - /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */ - /*************************************************************/ - - /* Wait 100ms for interrupt. */ - EndTime = jiffies + msecs_to_jiffies(100); - - for(;;) { - if (time_after(jiffies, EndTime)) { - rc = false; - break; - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - status = usc_InDmaReg( info, RDMR ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - if ( !(status & BIT4) && (status & BIT5) ) { - /* INITG (BIT 4) is inactive (no entry read in progress) AND */ - /* BUSY (BIT 5) is active (channel still active). */ - /* This means the buffer entry read has completed. */ - break; - } - } - - - /******************************/ - /* Program 16C32 transmitter. */ - /******************************/ - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* Program the Transmit Character Length Register (TCLR) */ - /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ - - usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count ); - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - - /* Program the address of the 1st DMA Buffer Entry in linked list */ - - phys_addr = info->tx_buffer_list[0].phys_entry; - usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr ); - usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) ); - - /* unlatch Tx status bits, and start transmit channel. */ - - usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) ); - usc_DmaCmd( info, DmaCmd_InitTxChannel ); - - /* wait for DMA controller to fill transmit FIFO */ - - usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - /**********************************/ - /* WAIT FOR TRANSMIT FIFO TO FILL */ - /**********************************/ - - /* Wait 100ms */ - EndTime = jiffies + msecs_to_jiffies(100); - - for(;;) { - if (time_after(jiffies, EndTime)) { - rc = false; - break; - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - FifoLevel = usc_InReg(info, TICR) >> 8; - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - if ( FifoLevel < 16 ) - break; - else - if ( FrameSize < 32 ) { - /* This frame is smaller than the entire transmit FIFO */ - /* so wait for the entire frame to be loaded. */ - if ( FifoLevel <= (32 - FrameSize) ) - break; - } - } - - - if ( rc ) - { - /* Enable 16C32 transmitter. */ - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */ - usc_TCmd( info, TCmd_SendFrame ); - usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - /******************************/ - /* WAIT FOR TRANSMIT COMPLETE */ - /******************************/ - - /* Wait 100ms */ - EndTime = jiffies + msecs_to_jiffies(100); - - /* While timer not expired wait for transmit complete */ - - spin_lock_irqsave(&info->irq_spinlock,flags); - status = usc_InReg( info, TCSR ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) { - if (time_after(jiffies, EndTime)) { - rc = false; - break; - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - status = usc_InReg( info, TCSR ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - } - - - if ( rc ){ - /* CHECK FOR TRANSMIT ERRORS */ - if ( status & (BIT5 + BIT1) ) - rc = false; - } - - if ( rc ) { - /* WAIT FOR RECEIVE COMPLETE */ - - /* Wait 100ms */ - EndTime = jiffies + msecs_to_jiffies(100); - - /* Wait for 16C32 to write receive status to buffer entry. */ - status=info->rx_buffer_list[0].status; - while ( status == 0 ) { - if (time_after(jiffies, EndTime)) { - rc = false; - break; - } - status=info->rx_buffer_list[0].status; - } - } - - - if ( rc ) { - /* CHECK FOR RECEIVE ERRORS */ - status = info->rx_buffer_list[0].status; - - if ( status & (BIT8 + BIT3 + BIT1) ) { - /* receive error has occurred */ - rc = false; - } else { - if ( memcmp( info->tx_buffer_list[0].virt_addr , - info->rx_buffer_list[0].virt_addr, FrameSize ) ){ - rc = false; - } - } - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_reset( info ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - /* restore current port options */ - memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - - return rc; - -} /* end of mgsl_dma_test() */ - -/* mgsl_adapter_test() - * - * Perform the register, IRQ, and DMA tests for the 16C32. - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise -ENODEV - */ -static int mgsl_adapter_test( struct mgsl_struct *info ) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):Testing device %s\n", - __FILE__,__LINE__,info->device_name ); - - if ( !mgsl_register_test( info ) ) { - info->init_error = DiagStatus_AddressFailure; - printk( "%s(%d):Register test failure for device %s Addr=%04X\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) ); - return -ENODEV; - } - - if ( !mgsl_irq_test( info ) ) { - info->init_error = DiagStatus_IrqFailure; - printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); - return -ENODEV; - } - - if ( !mgsl_dma_test( info ) ) { - info->init_error = DiagStatus_DmaFailure; - printk( "%s(%d):DMA test failure for device %s DMA=%d\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) ); - return -ENODEV; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):device %s passed diagnostics\n", - __FILE__,__LINE__,info->device_name ); - - return 0; - -} /* end of mgsl_adapter_test() */ - -/* mgsl_memory_test() - * - * Test the shared memory on a PCI adapter. - * - * Arguments: info pointer to device instance data - * Return Value: true if test passed, otherwise false - */ -static bool mgsl_memory_test( struct mgsl_struct *info ) -{ - static unsigned long BitPatterns[] = - { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; - unsigned long Patterncount = ARRAY_SIZE(BitPatterns); - unsigned long i; - unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long); - unsigned long * TestAddr; - - if ( info->bus_type != MGSL_BUS_TYPE_PCI ) - return true; - - TestAddr = (unsigned long *)info->memory_base; - - /* Test data lines with test pattern at one location. */ - - for ( i = 0 ; i < Patterncount ; i++ ) { - *TestAddr = BitPatterns[i]; - if ( *TestAddr != BitPatterns[i] ) - return false; - } - - /* Test address lines with incrementing pattern over */ - /* entire address range. */ - - for ( i = 0 ; i < TestLimit ; i++ ) { - *TestAddr = i * 4; - TestAddr++; - } - - TestAddr = (unsigned long *)info->memory_base; - - for ( i = 0 ; i < TestLimit ; i++ ) { - if ( *TestAddr != i * 4 ) - return false; - TestAddr++; - } - - memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE ); - - return true; - -} /* End Of mgsl_memory_test() */ - - -/* mgsl_load_pci_memory() - * - * Load a large block of data into the PCI shared memory. - * Use this instead of memcpy() or memmove() to move data - * into the PCI shared memory. - * - * Notes: - * - * This function prevents the PCI9050 interface chip from hogging - * the adapter local bus, which can starve the 16C32 by preventing - * 16C32 bus master cycles. - * - * The PCI9050 documentation says that the 9050 will always release - * control of the local bus after completing the current read - * or write operation. - * - * It appears that as long as the PCI9050 write FIFO is full, the - * PCI9050 treats all of the writes as a single burst transaction - * and will not release the bus. This causes DMA latency problems - * at high speeds when copying large data blocks to the shared - * memory. - * - * This function in effect, breaks the a large shared memory write - * into multiple transations by interleaving a shared memory read - * which will flush the write FIFO and 'complete' the write - * transation. This allows any pending DMA request to gain control - * of the local bus in a timely fasion. - * - * Arguments: - * - * TargetPtr pointer to target address in PCI shared memory - * SourcePtr pointer to source buffer for data - * count count in bytes of data to copy - * - * Return Value: None - */ -static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr, - unsigned short count ) -{ - /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */ -#define PCI_LOAD_INTERVAL 64 - - unsigned short Intervalcount = count / PCI_LOAD_INTERVAL; - unsigned short Index; - unsigned long Dummy; - - for ( Index = 0 ; Index < Intervalcount ; Index++ ) - { - memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL); - Dummy = *((volatile unsigned long *)TargetPtr); - TargetPtr += PCI_LOAD_INTERVAL; - SourcePtr += PCI_LOAD_INTERVAL; - } - - memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL ); - -} /* End Of mgsl_load_pci_memory() */ - -static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit) -{ - int i; - int linecount; - if (xmit) - printk("%s tx data:\n",info->device_name); - else - printk("%s rx data:\n",info->device_name); - - while(count) { - if (count > 16) - linecount = 16; - else - linecount = count; - - for(i=0;i=040 && data[i]<=0176) - printk("%c",data[i]); - else - printk("."); - } - printk("\n"); - - data += linecount; - count -= linecount; - } -} /* end of mgsl_trace_block() */ - -/* mgsl_tx_timeout() - * - * called when HDLC frame times out - * update stats and do tx completion processing - * - * Arguments: context pointer to device instance data - * Return Value: None - */ -static void mgsl_tx_timeout(unsigned long context) -{ - struct mgsl_struct *info = (struct mgsl_struct*)context; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_tx_timeout(%s)\n", - __FILE__,__LINE__,info->device_name); - if(info->tx_active && - (info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW) ) { - info->icount.txtimeout++; - } - spin_lock_irqsave(&info->irq_spinlock,flags); - info->tx_active = false; - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) - usc_loopmode_cancel_transmit( info ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - mgsl_bh_transmit(info); - -} /* end of mgsl_tx_timeout() */ - -/* signal that there are no more frames to send, so that - * line is 'released' by echoing RxD to TxD when current - * transmission is complete (or immediately if no tx in progress). - */ -static int mgsl_loopmode_send_done( struct mgsl_struct * info ) -{ - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { - if (info->tx_active) - info->loopmode_send_done_requested = true; - else - usc_loopmode_send_done(info); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return 0; -} - -/* release the line by echoing RxD to TxD - * upon completion of a transmit frame - */ -static void usc_loopmode_send_done( struct mgsl_struct * info ) -{ - info->loopmode_send_done_requested = false; - /* clear CMR:13 to 0 to start echoing RxData to TxData */ - info->cmr_value &= ~BIT13; - usc_OutReg(info, CMR, info->cmr_value); -} - -/* abort a transmit in progress while in HDLC LoopMode - */ -static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ) -{ - /* reset tx dma channel and purge TxFifo */ - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - usc_DmaCmd( info, DmaCmd_ResetTxChannel ); - usc_loopmode_send_done( info ); -} - -/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled - * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort) - * we must clear CMR:13 to begin repeating TxData to RxData - */ -static void usc_loopmode_insert_request( struct mgsl_struct * info ) -{ - info->loopmode_insert_requested = true; - - /* enable RxAbort irq. On next RxAbort, clear CMR:13 to - * begin repeating TxData on RxData (complete insertion) - */ - usc_OutReg( info, RICR, - (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) ); - - /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */ - info->cmr_value |= BIT13; - usc_OutReg(info, CMR, info->cmr_value); -} - -/* return 1 if station is inserted into the loop, otherwise 0 - */ -static int usc_loopmode_active( struct mgsl_struct * info) -{ - return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ; -} - -#if SYNCLINK_GENERIC_HDLC - -/** - * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) - * set encoding and frame check sequence (FCS) options - * - * dev pointer to network device structure - * encoding serial encoding setting - * parity FCS setting - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - struct mgsl_struct *info = dev_to_port(dev); - unsigned char new_encoding; - unsigned short new_crctype; - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - switch (encoding) - { - case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; - case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; - case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; - case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; - case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; - default: return -EINVAL; - } - - switch (parity) - { - case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; - case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; - case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; - default: return -EINVAL; - } - - info->params.encoding = new_encoding; - info->params.crc_type = new_crctype; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - mgsl_program_hw(info); - - return 0; -} - -/** - * called by generic HDLC layer to send frame - * - * skb socket buffer containing HDLC frame - * dev pointer to network device structure - */ -static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct mgsl_struct *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); - - /* stop sending until this frame completes */ - netif_stop_queue(dev); - - /* copy data to device buffers */ - info->xmit_cnt = skb->len; - mgsl_load_tx_dma_buffer(info, skb->data, skb->len); - - /* update network statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - - /* save start time for transmit timeout detection */ - dev->trans_start = jiffies; - - /* start hardware transmitter if necessary */ - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!info->tx_active) - usc_start_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return NETDEV_TX_OK; -} - -/** - * called by network layer when interface enabled - * claim resources and initialize hardware - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_open(struct net_device *dev) -{ - struct mgsl_struct *info = dev_to_port(dev); - int rc; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); - - /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) - return rc; - - /* arbitrate between network and tty opens */ - spin_lock_irqsave(&info->netlock, flags); - if (info->port.count != 0 || info->netcount != 0) { - printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); - spin_unlock_irqrestore(&info->netlock, flags); - return -EBUSY; - } - info->netcount=1; - spin_unlock_irqrestore(&info->netlock, flags); - - /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - return rc; - } - - /* assert DTR and RTS, apply hardware settings */ - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - mgsl_program_hw(info); - - /* enable network layer transmit */ - dev->trans_start = jiffies; - netif_start_queue(dev); - - /* inform generic HDLC layer of current DCD status */ - spin_lock_irqsave(&info->irq_spinlock, flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock, flags); - if (info->serial_signals & SerialSignal_DCD) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - return 0; -} - -/** - * called by network layer when interface is disabled - * shutdown hardware and release resources - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_close(struct net_device *dev) -{ - struct mgsl_struct *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); - - netif_stop_queue(dev); - - /* shutdown adapter and release resources */ - shutdown(info); - - hdlc_close(dev); - - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - - return 0; -} - -/** - * called by network layer to process IOCTL call to network device - * - * dev pointer to network device structure - * ifr pointer to network interface request structure - * cmd IOCTL command code - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - const size_t size = sizeof(sync_serial_settings); - sync_serial_settings new_line; - sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; - struct mgsl_struct *info = dev_to_port(dev); - unsigned int flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - if (cmd != SIOCWANDEV) - return hdlc_ioctl(dev, ifr, cmd); - - switch(ifr->ifr_settings.type) { - case IF_GET_IFACE: /* return current sync_serial_settings */ - - ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; - if (ifr->ifr_settings.size < size) { - ifr->ifr_settings.size = size; /* data size wanted */ - return -ENOBUFS; - } - - flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - - switch (flags){ - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; - case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; - default: new_line.clock_type = CLOCK_DEFAULT; - } - - new_line.clock_rate = info->params.clock_speed; - new_line.loopback = info->params.loopback ? 1:0; - - if (copy_to_user(line, &new_line, size)) - return -EFAULT; - return 0; - - case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&new_line, line, size)) - return -EFAULT; - - switch (new_line.clock_type) - { - case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; - case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; - case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; - case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; - case CLOCK_DEFAULT: flags = info->params.flags & - (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; - default: return -EINVAL; - } - - if (new_line.loopback != 0 && new_line.loopback != 1) - return -EINVAL; - - info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - info->params.flags |= flags; - - info->params.loopback = new_line.loopback; - - if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) - info->params.clock_speed = new_line.clock_rate; - else - info->params.clock_speed = 0; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - mgsl_program_hw(info); - return 0; - - default: - return hdlc_ioctl(dev, ifr, cmd); - } -} - -/** - * called by network layer when transmit timeout is detected - * - * dev pointer to network device structure - */ -static void hdlcdev_tx_timeout(struct net_device *dev) -{ - struct mgsl_struct *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_tx_timeout(%s)\n",dev->name); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_stop_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - netif_wake_queue(dev); -} - -/** - * called by device driver when transmit completes - * reenable network layer transmit if stopped - * - * info pointer to device instance information - */ -static void hdlcdev_tx_done(struct mgsl_struct *info) -{ - if (netif_queue_stopped(info->netdev)) - netif_wake_queue(info->netdev); -} - -/** - * called by device driver when frame received - * pass frame to network layer - * - * info pointer to device instance information - * buf pointer to buffer contianing frame data - * size count of data bytes in buf - */ -static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size) -{ - struct sk_buff *skb = dev_alloc_skb(size); - struct net_device *dev = info->netdev; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_rx(%s)\n", dev->name); - - if (skb == NULL) { - printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", - dev->name); - dev->stats.rx_dropped++; - return; - } - - memcpy(skb_put(skb, size), buf, size); - - skb->protocol = hdlc_type_trans(skb, dev); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - - netif_rx(skb); -} - -static const struct net_device_ops hdlcdev_ops = { - .ndo_open = hdlcdev_open, - .ndo_stop = hdlcdev_close, - .ndo_change_mtu = hdlc_change_mtu, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_do_ioctl = hdlcdev_ioctl, - .ndo_tx_timeout = hdlcdev_tx_timeout, -}; - -/** - * called by device driver when adding device instance - * do generic HDLC initialization - * - * info pointer to device instance information - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_init(struct mgsl_struct *info) -{ - int rc; - struct net_device *dev; - hdlc_device *hdlc; - - /* allocate and initialize network and HDLC layer objects */ - - if (!(dev = alloc_hdlcdev(info))) { - printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); - return -ENOMEM; - } - - /* for network layer reporting purposes only */ - dev->base_addr = info->io_base; - dev->irq = info->irq_level; - dev->dma = info->dma_level; - - /* network layer callbacks and settings */ - dev->netdev_ops = &hdlcdev_ops; - dev->watchdog_timeo = 10 * HZ; - dev->tx_queue_len = 50; - - /* generic HDLC layer callbacks and settings */ - hdlc = dev_to_hdlc(dev); - hdlc->attach = hdlcdev_attach; - hdlc->xmit = hdlcdev_xmit; - - /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { - printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); - free_netdev(dev); - return rc; - } - - info->netdev = dev; - return 0; -} - -/** - * called by device driver when removing device instance - * do generic HDLC cleanup - * - * info pointer to device instance information - */ -static void hdlcdev_exit(struct mgsl_struct *info) -{ - unregister_hdlc_device(info->netdev); - free_netdev(info->netdev); - info->netdev = NULL; -} - -#endif /* CONFIG_HDLC */ - - -static int __devinit synclink_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) -{ - struct mgsl_struct *info; - - if (pci_enable_device(dev)) { - printk("error enabling pci device %p\n", dev); - return -EIO; - } - - if (!(info = mgsl_allocate_device())) { - printk("can't allocate device instance data.\n"); - return -EIO; - } - - /* Copy user configuration info to device instance data */ - - info->io_base = pci_resource_start(dev, 2); - info->irq_level = dev->irq; - info->phys_memory_base = pci_resource_start(dev, 3); - - /* Because veremap only works on page boundaries we must map - * a larger area than is actually implemented for the LCR - * memory range. We map a full page starting at the page boundary. - */ - info->phys_lcr_base = pci_resource_start(dev, 0); - info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); - info->phys_lcr_base &= ~(PAGE_SIZE-1); - - info->bus_type = MGSL_BUS_TYPE_PCI; - info->io_addr_size = 8; - info->irq_flags = IRQF_SHARED; - - if (dev->device == 0x0210) { - /* Version 1 PCI9030 based universal PCI adapter */ - info->misc_ctrl_value = 0x007c4080; - info->hw_version = 1; - } else { - /* Version 0 PCI9050 based 5V PCI adapter - * A PCI9050 bug prevents reading LCR registers if - * LCR base address bit 7 is set. Maintain shadow - * value so we can write to LCR misc control reg. - */ - info->misc_ctrl_value = 0x087e4546; - info->hw_version = 0; - } - - mgsl_add_device(info); - - return 0; -} - -static void __devexit synclink_remove_one (struct pci_dev *dev) -{ -} - diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c deleted file mode 100644 index a35dd549a008..000000000000 --- a/drivers/char/synclink_gt.c +++ /dev/null @@ -1,5161 +0,0 @@ -/* - * Device driver for Microgate SyncLink GT serial adapters. - * - * written by Paul Fulghum for Microgate Corporation - * paulkf@microgate.com - * - * Microgate and SyncLink are trademarks of Microgate Corporation - * - * This code is released under the GNU General Public License (GPL) - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * DEBUG OUTPUT DEFINITIONS - * - * uncomment lines below to enable specific types of debug output - * - * DBGINFO information - most verbose output - * DBGERR serious errors - * DBGBH bottom half service routine debugging - * DBGISR interrupt service routine debugging - * DBGDATA output receive and transmit data - * DBGTBUF output transmit DMA buffers and registers - * DBGRBUF output receive DMA buffers and registers - */ - -#define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt -#define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt -#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt -#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt -#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) -/*#define DBGTBUF(info) dump_tbufs(info)*/ -/*#define DBGRBUF(info) dump_rbufs(info)*/ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE)) -#define SYNCLINK_GENERIC_HDLC 1 -#else -#define SYNCLINK_GENERIC_HDLC 0 -#endif - -/* - * module identification - */ -static char *driver_name = "SyncLink GT"; -static char *tty_driver_name = "synclink_gt"; -static char *tty_dev_prefix = "ttySLG"; -MODULE_LICENSE("GPL"); -#define MGSL_MAGIC 0x5401 -#define MAX_DEVICES 32 - -static struct pci_device_id pci_table[] = { - {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, - {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, - {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, - {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, - {0,}, /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, pci_table); - -static int init_one(struct pci_dev *dev,const struct pci_device_id *ent); -static void remove_one(struct pci_dev *dev); -static struct pci_driver pci_driver = { - .name = "synclink_gt", - .id_table = pci_table, - .probe = init_one, - .remove = __devexit_p(remove_one), -}; - -static bool pci_registered; - -/* - * module configuration and status - */ -static struct slgt_info *slgt_device_list; -static int slgt_device_count; - -static int ttymajor; -static int debug_level; -static int maxframe[MAX_DEVICES]; - -module_param(ttymajor, int, 0); -module_param(debug_level, int, 0); -module_param_array(maxframe, int, NULL, 0); - -MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); -MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); -MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); - -/* - * tty support and callbacks - */ -static struct tty_driver *serial_driver; - -static int open(struct tty_struct *tty, struct file * filp); -static void close(struct tty_struct *tty, struct file * filp); -static void hangup(struct tty_struct *tty); -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); - -static int write(struct tty_struct *tty, const unsigned char *buf, int count); -static int put_char(struct tty_struct *tty, unsigned char ch); -static void send_xchar(struct tty_struct *tty, char ch); -static void wait_until_sent(struct tty_struct *tty, int timeout); -static int write_room(struct tty_struct *tty); -static void flush_chars(struct tty_struct *tty); -static void flush_buffer(struct tty_struct *tty); -static void tx_hold(struct tty_struct *tty); -static void tx_release(struct tty_struct *tty); - -static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int chars_in_buffer(struct tty_struct *tty); -static void throttle(struct tty_struct * tty); -static void unthrottle(struct tty_struct * tty); -static int set_break(struct tty_struct *tty, int break_state); - -/* - * generic HDLC support and callbacks - */ -#if SYNCLINK_GENERIC_HDLC -#define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(struct slgt_info *info); -static void hdlcdev_rx(struct slgt_info *info, char *buf, int size); -static int hdlcdev_init(struct slgt_info *info); -static void hdlcdev_exit(struct slgt_info *info); -#endif - - -/* - * device specific structures, macros and functions - */ - -#define SLGT_MAX_PORTS 4 -#define SLGT_REG_SIZE 256 - -/* - * conditional wait facility - */ -struct cond_wait { - struct cond_wait *next; - wait_queue_head_t q; - wait_queue_t wait; - unsigned int data; -}; -static void init_cond_wait(struct cond_wait *w, unsigned int data); -static void add_cond_wait(struct cond_wait **head, struct cond_wait *w); -static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w); -static void flush_cond_wait(struct cond_wait **head); - -/* - * DMA buffer descriptor and access macros - */ -struct slgt_desc -{ - __le16 count; - __le16 status; - __le32 pbuf; /* physical address of data buffer */ - __le32 next; /* physical address of next descriptor */ - - /* driver book keeping */ - char *buf; /* virtual address of data buffer */ - unsigned int pdesc; /* physical address of this descriptor */ - dma_addr_t buf_dma_addr; - unsigned short buf_count; -}; - -#define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b)) -#define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) -#define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) -#define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) -#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) -#define desc_count(a) (le16_to_cpu((a).count)) -#define desc_status(a) (le16_to_cpu((a).status)) -#define desc_complete(a) (le16_to_cpu((a).status) & BIT15) -#define desc_eof(a) (le16_to_cpu((a).status) & BIT2) -#define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1) -#define desc_abort(a) (le16_to_cpu((a).status) & BIT0) -#define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3) - -struct _input_signal_events { - int ri_up; - int ri_down; - int dsr_up; - int dsr_down; - int dcd_up; - int dcd_down; - int cts_up; - int cts_down; -}; - -/* - * device instance data structure - */ -struct slgt_info { - void *if_ptr; /* General purpose pointer (used by SPPP) */ - struct tty_port port; - - struct slgt_info *next_device; /* device list link */ - - int magic; - - char device_name[25]; - struct pci_dev *pdev; - - int port_count; /* count of ports on adapter */ - int adapter_num; /* adapter instance number */ - int port_num; /* port instance number */ - - /* array of pointers to port contexts on this adapter */ - struct slgt_info *port_array[SLGT_MAX_PORTS]; - - int line; /* tty line instance number */ - - struct mgsl_icount icount; - - int timeout; - int x_char; /* xon/xoff character */ - unsigned int read_status_mask; - unsigned int ignore_status_mask; - - wait_queue_head_t status_event_wait_q; - wait_queue_head_t event_wait_q; - struct timer_list tx_timer; - struct timer_list rx_timer; - - unsigned int gpio_present; - struct cond_wait *gpio_wait_q; - - spinlock_t lock; /* spinlock for synchronizing with ISR */ - - struct work_struct task; - u32 pending_bh; - bool bh_requested; - bool bh_running; - - int isr_overflow; - bool irq_requested; /* true if IRQ requested */ - bool irq_occurred; /* for diagnostics use */ - - /* device configuration */ - - unsigned int bus_type; - unsigned int irq_level; - unsigned long irq_flags; - - unsigned char __iomem * reg_addr; /* memory mapped registers address */ - u32 phys_reg_addr; - bool reg_addr_requested; - - MGSL_PARAMS params; /* communications parameters */ - u32 idle_mode; - u32 max_frame_size; /* as set by device config */ - - unsigned int rbuf_fill_level; - unsigned int rx_pio; - unsigned int if_mode; - unsigned int base_clock; - unsigned int xsync; - unsigned int xctrl; - - /* device status */ - - bool rx_enabled; - bool rx_restart; - - bool tx_enabled; - bool tx_active; - - unsigned char signals; /* serial signal states */ - int init_error; /* initialization error */ - - unsigned char *tx_buf; - int tx_count; - - char flag_buf[MAX_ASYNC_BUFFER_SIZE]; - char char_buf[MAX_ASYNC_BUFFER_SIZE]; - bool drop_rts_on_tx_done; - struct _input_signal_events input_signal_events; - - int dcd_chkcount; /* check counts to prevent */ - int cts_chkcount; /* too many IRQs if a signal */ - int dsr_chkcount; /* is floating */ - int ri_chkcount; - - char *bufs; /* virtual address of DMA buffer lists */ - dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */ - - unsigned int rbuf_count; - struct slgt_desc *rbufs; - unsigned int rbuf_current; - unsigned int rbuf_index; - unsigned int rbuf_fill_index; - unsigned short rbuf_fill_count; - - unsigned int tbuf_count; - struct slgt_desc *tbufs; - unsigned int tbuf_current; - unsigned int tbuf_start; - - unsigned char *tmp_rbuf; - unsigned int tmp_rbuf_count; - - /* SPPP/Cisco HDLC device parts */ - - int netcount; - spinlock_t netlock; -#if SYNCLINK_GENERIC_HDLC - struct net_device *netdev; -#endif - -}; - -static MGSL_PARAMS default_params = { - .mode = MGSL_MODE_HDLC, - .loopback = 0, - .flags = HDLC_FLAG_UNDERRUN_ABORT15, - .encoding = HDLC_ENCODING_NRZI_SPACE, - .clock_speed = 0, - .addr_filter = 0xff, - .crc_type = HDLC_CRC_16_CCITT, - .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS, - .preamble = HDLC_PREAMBLE_PATTERN_NONE, - .data_rate = 9600, - .data_bits = 8, - .stop_bits = 1, - .parity = ASYNC_PARITY_NONE -}; - - -#define BH_RECEIVE 1 -#define BH_TRANSMIT 2 -#define BH_STATUS 4 -#define IO_PIN_SHUTDOWN_LIMIT 100 - -#define DMABUFSIZE 256 -#define DESC_LIST_SIZE 4096 - -#define MASK_PARITY BIT1 -#define MASK_FRAMING BIT0 -#define MASK_BREAK BIT14 -#define MASK_OVERRUN BIT4 - -#define GSR 0x00 /* global status */ -#define JCR 0x04 /* JTAG control */ -#define IODR 0x08 /* GPIO direction */ -#define IOER 0x0c /* GPIO interrupt enable */ -#define IOVR 0x10 /* GPIO value */ -#define IOSR 0x14 /* GPIO interrupt status */ -#define TDR 0x80 /* tx data */ -#define RDR 0x80 /* rx data */ -#define TCR 0x82 /* tx control */ -#define TIR 0x84 /* tx idle */ -#define TPR 0x85 /* tx preamble */ -#define RCR 0x86 /* rx control */ -#define VCR 0x88 /* V.24 control */ -#define CCR 0x89 /* clock control */ -#define BDR 0x8a /* baud divisor */ -#define SCR 0x8c /* serial control */ -#define SSR 0x8e /* serial status */ -#define RDCSR 0x90 /* rx DMA control/status */ -#define TDCSR 0x94 /* tx DMA control/status */ -#define RDDAR 0x98 /* rx DMA descriptor address */ -#define TDDAR 0x9c /* tx DMA descriptor address */ -#define XSR 0x40 /* extended sync pattern */ -#define XCR 0x44 /* extended control */ - -#define RXIDLE BIT14 -#define RXBREAK BIT14 -#define IRQ_TXDATA BIT13 -#define IRQ_TXIDLE BIT12 -#define IRQ_TXUNDER BIT11 /* HDLC */ -#define IRQ_RXDATA BIT10 -#define IRQ_RXIDLE BIT9 /* HDLC */ -#define IRQ_RXBREAK BIT9 /* async */ -#define IRQ_RXOVER BIT8 -#define IRQ_DSR BIT7 -#define IRQ_CTS BIT6 -#define IRQ_DCD BIT5 -#define IRQ_RI BIT4 -#define IRQ_ALL 0x3ff0 -#define IRQ_MASTER BIT0 - -#define slgt_irq_on(info, mask) \ - wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask))) -#define slgt_irq_off(info, mask) \ - wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask))) - -static __u8 rd_reg8(struct slgt_info *info, unsigned int addr); -static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value); -static __u16 rd_reg16(struct slgt_info *info, unsigned int addr); -static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value); -static __u32 rd_reg32(struct slgt_info *info, unsigned int addr); -static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value); - -static void msc_set_vcr(struct slgt_info *info); - -static int startup(struct slgt_info *info); -static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info); -static void shutdown(struct slgt_info *info); -static void program_hw(struct slgt_info *info); -static void change_params(struct slgt_info *info); - -static int register_test(struct slgt_info *info); -static int irq_test(struct slgt_info *info); -static int loopback_test(struct slgt_info *info); -static int adapter_test(struct slgt_info *info); - -static void reset_adapter(struct slgt_info *info); -static void reset_port(struct slgt_info *info); -static void async_mode(struct slgt_info *info); -static void sync_mode(struct slgt_info *info); - -static void rx_stop(struct slgt_info *info); -static void rx_start(struct slgt_info *info); -static void reset_rbufs(struct slgt_info *info); -static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); -static void rdma_reset(struct slgt_info *info); -static bool rx_get_frame(struct slgt_info *info); -static bool rx_get_buf(struct slgt_info *info); - -static void tx_start(struct slgt_info *info); -static void tx_stop(struct slgt_info *info); -static void tx_set_idle(struct slgt_info *info); -static unsigned int free_tbuf_count(struct slgt_info *info); -static unsigned int tbuf_bytes(struct slgt_info *info); -static void reset_tbufs(struct slgt_info *info); -static void tdma_reset(struct slgt_info *info); -static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); - -static void get_signals(struct slgt_info *info); -static void set_signals(struct slgt_info *info); -static void enable_loopback(struct slgt_info *info); -static void set_rate(struct slgt_info *info, u32 data_rate); - -static int bh_action(struct slgt_info *info); -static void bh_handler(struct work_struct *work); -static void bh_transmit(struct slgt_info *info); -static void isr_serial(struct slgt_info *info); -static void isr_rdma(struct slgt_info *info); -static void isr_txeom(struct slgt_info *info, unsigned short status); -static void isr_tdma(struct slgt_info *info); - -static int alloc_dma_bufs(struct slgt_info *info); -static void free_dma_bufs(struct slgt_info *info); -static int alloc_desc(struct slgt_info *info); -static void free_desc(struct slgt_info *info); -static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); -static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); - -static int alloc_tmp_rbuf(struct slgt_info *info); -static void free_tmp_rbuf(struct slgt_info *info); - -static void tx_timeout(unsigned long context); -static void rx_timeout(unsigned long context); - -/* - * ioctl handlers - */ -static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount); -static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params); -static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params); -static int get_txidle(struct slgt_info *info, int __user *idle_mode); -static int set_txidle(struct slgt_info *info, int idle_mode); -static int tx_enable(struct slgt_info *info, int enable); -static int tx_abort(struct slgt_info *info); -static int rx_enable(struct slgt_info *info, int enable); -static int modem_input_wait(struct slgt_info *info,int arg); -static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int set_break(struct tty_struct *tty, int break_state); -static int get_interface(struct slgt_info *info, int __user *if_mode); -static int set_interface(struct slgt_info *info, int if_mode); -static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); -static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); -static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); -static int get_xsync(struct slgt_info *info, int __user *if_mode); -static int set_xsync(struct slgt_info *info, int if_mode); -static int get_xctrl(struct slgt_info *info, int __user *if_mode); -static int set_xctrl(struct slgt_info *info, int if_mode); - -/* - * driver functions - */ -static void add_device(struct slgt_info *info); -static void device_init(int adapter_num, struct pci_dev *pdev); -static int claim_resources(struct slgt_info *info); -static void release_resources(struct slgt_info *info); - -/* - * DEBUG OUTPUT CODE - */ -#ifndef DBGINFO -#define DBGINFO(fmt) -#endif -#ifndef DBGERR -#define DBGERR(fmt) -#endif -#ifndef DBGBH -#define DBGBH(fmt) -#endif -#ifndef DBGISR -#define DBGISR(fmt) -#endif - -#ifdef DBGDATA -static void trace_block(struct slgt_info *info, const char *data, int count, const char *label) -{ - int i; - int linecount; - printk("%s %s data:\n",info->device_name, label); - while(count) { - linecount = (count > 16) ? 16 : count; - for(i=0; i < linecount; i++) - printk("%02X ",(unsigned char)data[i]); - for(;i<17;i++) - printk(" "); - for(i=0;i=040 && data[i]<=0176) - printk("%c",data[i]); - else - printk("."); - } - printk("\n"); - data += linecount; - count -= linecount; - } -} -#else -#define DBGDATA(info, buf, size, label) -#endif - -#ifdef DBGTBUF -static void dump_tbufs(struct slgt_info *info) -{ - int i; - printk("tbuf_current=%d\n", info->tbuf_current); - for (i=0 ; i < info->tbuf_count ; i++) { - printk("%d: count=%04X status=%04X\n", - i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status)); - } -} -#else -#define DBGTBUF(info) -#endif - -#ifdef DBGRBUF -static void dump_rbufs(struct slgt_info *info) -{ - int i; - printk("rbuf_current=%d\n", info->rbuf_current); - for (i=0 ; i < info->rbuf_count ; i++) { - printk("%d: count=%04X status=%04X\n", - i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status)); - } -} -#else -#define DBGRBUF(info) -#endif - -static inline int sanity_check(struct slgt_info *info, char *devname, const char *name) -{ -#ifdef SANITY_CHECK - if (!info) { - printk("null struct slgt_info for (%s) in %s\n", devname, name); - return 1; - } - if (info->magic != MGSL_MAGIC) { - printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); - return 1; - } -#else - if (!info) - return 1; -#endif - return 0; -} - -/** - * line discipline callback wrappers - * - * The wrappers maintain line discipline references - * while calling into the line discipline. - * - * ldisc_receive_buf - pass receive data to line discipline - */ -static void ldisc_receive_buf(struct tty_struct *tty, - const __u8 *data, char *flags, int count) -{ - struct tty_ldisc *ld; - if (!tty) - return; - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->receive_buf) - ld->ops->receive_buf(tty, data, flags, count); - tty_ldisc_deref(ld); - } -} - -/* tty callbacks */ - -static int open(struct tty_struct *tty, struct file *filp) -{ - struct slgt_info *info; - int retval, line; - unsigned long flags; - - line = tty->index; - if ((line < 0) || (line >= slgt_device_count)) { - DBGERR(("%s: open with invalid line #%d.\n", driver_name, line)); - return -ENODEV; - } - - info = slgt_device_list; - while(info && info->line != line) - info = info->next_device; - if (sanity_check(info, tty->name, "open")) - return -ENODEV; - if (info->init_error) { - DBGERR(("%s init error=%d\n", info->device_name, info->init_error)); - return -ENODEV; - } - - tty->driver_data = info; - info->port.tty = tty; - - DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count)); - - /* If port is closing, signal caller to try again */ - if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){ - if (info->port.flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->port.close_wait); - retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - goto cleanup; - } - - mutex_lock(&info->port.mutex); - info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - spin_lock_irqsave(&info->netlock, flags); - if (info->netcount) { - retval = -EBUSY; - spin_unlock_irqrestore(&info->netlock, flags); - mutex_unlock(&info->port.mutex); - goto cleanup; - } - info->port.count++; - spin_unlock_irqrestore(&info->netlock, flags); - - if (info->port.count == 1) { - /* 1st open on this device, init hardware */ - retval = startup(info); - if (retval < 0) { - mutex_unlock(&info->port.mutex); - goto cleanup; - } - } - mutex_unlock(&info->port.mutex); - retval = block_til_ready(tty, filp, info); - if (retval) { - DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); - goto cleanup; - } - - retval = 0; - -cleanup: - if (retval) { - if (tty->count == 1) - info->port.tty = NULL; /* tty layer will release tty struct */ - if(info->port.count) - info->port.count--; - } - - DBGINFO(("%s open rc=%d\n", info->device_name, retval)); - return retval; -} - -static void close(struct tty_struct *tty, struct file *filp) -{ - struct slgt_info *info = tty->driver_data; - - if (sanity_check(info, tty->name, "close")) - return; - DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); - - if (tty_port_close_start(&info->port, tty, filp) == 0) - goto cleanup; - - mutex_lock(&info->port.mutex); - if (info->port.flags & ASYNC_INITIALIZED) - wait_until_sent(tty, info->timeout); - flush_buffer(tty); - tty_ldisc_flush(tty); - - shutdown(info); - mutex_unlock(&info->port.mutex); - - tty_port_close_end(&info->port, tty); - info->port.tty = NULL; -cleanup: - DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); -} - -static void hangup(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "hangup")) - return; - DBGINFO(("%s hangup\n", info->device_name)); - - flush_buffer(tty); - - mutex_lock(&info->port.mutex); - shutdown(info); - - spin_lock_irqsave(&info->port.lock, flags); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - spin_unlock_irqrestore(&info->port.lock, flags); - mutex_unlock(&info->port.mutex); - - wake_up_interruptible(&info->port.open_wait); -} - -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - DBGINFO(("%s set_termios\n", tty->driver->name)); - - change_params(info); - - /* Handle transition to B0 status */ - if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { - info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { - info->signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) { - info->signals |= SerialSignal_RTS; - } - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle turning off CRTSCTS */ - if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - tx_release(tty); - } -} - -static void update_tx_timer(struct slgt_info *info) -{ - /* - * use worst case speed of 1200bps to calculate transmit timeout - * based on data in buffers (tbuf_bytes) and FIFO (128 bytes) - */ - if (info->params.mode == MGSL_MODE_HDLC) { - int timeout = (tbuf_bytes(info) * 7) + 1000; - mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout)); - } -} - -static int write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int ret = 0; - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "write")) - return -EIO; - - DBGINFO(("%s write count=%d\n", info->device_name, count)); - - if (!info->tx_buf || (count > info->max_frame_size)) - return -EIO; - - if (!count || tty->stopped || tty->hw_stopped) - return 0; - - spin_lock_irqsave(&info->lock, flags); - - if (info->tx_count) { - /* send accumulated data from send_char() */ - if (!tx_load(info, info->tx_buf, info->tx_count)) - goto cleanup; - info->tx_count = 0; - } - - if (tx_load(info, buf, count)) - ret = count; - -cleanup: - spin_unlock_irqrestore(&info->lock, flags); - DBGINFO(("%s write rc=%d\n", info->device_name, ret)); - return ret; -} - -static int put_char(struct tty_struct *tty, unsigned char ch) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if (sanity_check(info, tty->name, "put_char")) - return 0; - DBGINFO(("%s put_char(%d)\n", info->device_name, ch)); - if (!info->tx_buf) - return 0; - spin_lock_irqsave(&info->lock,flags); - if (info->tx_count < info->max_frame_size) { - info->tx_buf[info->tx_count++] = ch; - ret = 1; - } - spin_unlock_irqrestore(&info->lock,flags); - return ret; -} - -static void send_xchar(struct tty_struct *tty, char ch) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "send_xchar")) - return; - DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch)); - info->x_char = ch; - if (ch) { - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_enabled) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -static void wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct slgt_info *info = tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (!info ) - return; - if (sanity_check(info, tty->name, "wait_until_sent")) - return; - DBGINFO(("%s wait_until_sent entry\n", info->device_name)); - if (!(info->port.flags & ASYNC_INITIALIZED)) - goto exit; - - orig_jiffies = jiffies; - - /* Set check interval to 1/5 of estimated time to - * send a character, and make it at least 1. The check - * interval should also be less than the timeout. - * Note: use tight timings here to satisfy the NIST-PCTS. - */ - - if (info->params.data_rate) { - char_time = info->timeout/(32 * 5); - if (!char_time) - char_time++; - } else - char_time = 1; - - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - - while (info->tx_active) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } -exit: - DBGINFO(("%s wait_until_sent exit\n", info->device_name)); -} - -static int write_room(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - int ret; - - if (sanity_check(info, tty->name, "write_room")) - return 0; - ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; - DBGINFO(("%s write_room=%d\n", info->device_name, ret)); - return ret; -} - -static void flush_chars(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "flush_chars")) - return; - DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count)); - - if (info->tx_count <= 0 || tty->stopped || - tty->hw_stopped || !info->tx_buf) - return; - - DBGINFO(("%s flush_chars start transmit\n", info->device_name)); - - spin_lock_irqsave(&info->lock,flags); - if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) - info->tx_count = 0; - spin_unlock_irqrestore(&info->lock,flags); -} - -static void flush_buffer(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "flush_buffer")) - return; - DBGINFO(("%s flush_buffer\n", info->device_name)); - - spin_lock_irqsave(&info->lock, flags); - info->tx_count = 0; - spin_unlock_irqrestore(&info->lock, flags); - - tty_wakeup(tty); -} - -/* - * throttle (stop) transmitter - */ -static void tx_hold(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_hold")) - return; - DBGINFO(("%s tx_hold\n", info->device_name)); - spin_lock_irqsave(&info->lock,flags); - if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC) - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* - * release (start) transmitter - */ -static void tx_release(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_release")) - return; - DBGINFO(("%s tx_release\n", info->device_name)); - spin_lock_irqsave(&info->lock, flags); - if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) - info->tx_count = 0; - spin_unlock_irqrestore(&info->lock, flags); -} - -/* - * Service an IOCTL request - * - * Arguments - * - * tty pointer to tty instance data - * cmd IOCTL command code - * arg command argument/context - * - * Return 0 if success, otherwise error code - */ -static int ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct slgt_info *info = tty->driver_data; - void __user *argp = (void __user *)arg; - int ret; - - if (sanity_check(info, tty->name, "ioctl")) - return -ENODEV; - DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case MGSL_IOCWAITEVENT: - return wait_mgsl_event(info, argp); - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - case MGSL_IOCSGPIO: - return set_gpio(info, argp); - case MGSL_IOCGGPIO: - return get_gpio(info, argp); - case MGSL_IOCWAITGPIO: - return wait_gpio(info, argp); - case MGSL_IOCGXSYNC: - return get_xsync(info, argp); - case MGSL_IOCSXSYNC: - return set_xsync(info, (int)arg); - case MGSL_IOCGXCTRL: - return get_xctrl(info, argp); - case MGSL_IOCSXCTRL: - return set_xctrl(info, (int)arg); - } - mutex_lock(&info->port.mutex); - switch (cmd) { - case MGSL_IOCGPARAMS: - ret = get_params(info, argp); - break; - case MGSL_IOCSPARAMS: - ret = set_params(info, argp); - break; - case MGSL_IOCGTXIDLE: - ret = get_txidle(info, argp); - break; - case MGSL_IOCSTXIDLE: - ret = set_txidle(info, (int)arg); - break; - case MGSL_IOCTXENABLE: - ret = tx_enable(info, (int)arg); - break; - case MGSL_IOCRXENABLE: - ret = rx_enable(info, (int)arg); - break; - case MGSL_IOCTXABORT: - ret = tx_abort(info); - break; - case MGSL_IOCGSTATS: - ret = get_stats(info, argp); - break; - case MGSL_IOCGIF: - ret = get_interface(info, argp); - break; - case MGSL_IOCSIF: - ret = set_interface(info,(int)arg); - break; - default: - ret = -ENOIOCTLCMD; - } - mutex_unlock(&info->port.mutex); - return ret; -} - -static int get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) - -{ - struct slgt_info *info = tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -/* - * support for 32 bit ioctl calls on 64 bit systems - */ -#ifdef CONFIG_COMPAT -static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params) -{ - struct MGSL_PARAMS32 tmp_params; - - DBGINFO(("%s get_params32\n", info->device_name)); - memset(&tmp_params, 0, sizeof(tmp_params)); - tmp_params.mode = (compat_ulong_t)info->params.mode; - tmp_params.loopback = info->params.loopback; - tmp_params.flags = info->params.flags; - tmp_params.encoding = info->params.encoding; - tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed; - tmp_params.addr_filter = info->params.addr_filter; - tmp_params.crc_type = info->params.crc_type; - tmp_params.preamble_length = info->params.preamble_length; - tmp_params.preamble = info->params.preamble; - tmp_params.data_rate = (compat_ulong_t)info->params.data_rate; - tmp_params.data_bits = info->params.data_bits; - tmp_params.stop_bits = info->params.stop_bits; - tmp_params.parity = info->params.parity; - if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32))) - return -EFAULT; - return 0; -} - -static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params) -{ - struct MGSL_PARAMS32 tmp_params; - - DBGINFO(("%s set_params32\n", info->device_name)); - if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32))) - return -EFAULT; - - spin_lock(&info->lock); - if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) { - info->base_clock = tmp_params.clock_speed; - } else { - info->params.mode = tmp_params.mode; - info->params.loopback = tmp_params.loopback; - info->params.flags = tmp_params.flags; - info->params.encoding = tmp_params.encoding; - info->params.clock_speed = tmp_params.clock_speed; - info->params.addr_filter = tmp_params.addr_filter; - info->params.crc_type = tmp_params.crc_type; - info->params.preamble_length = tmp_params.preamble_length; - info->params.preamble = tmp_params.preamble; - info->params.data_rate = tmp_params.data_rate; - info->params.data_bits = tmp_params.data_bits; - info->params.stop_bits = tmp_params.stop_bits; - info->params.parity = tmp_params.parity; - } - spin_unlock(&info->lock); - - program_hw(info); - - return 0; -} - -static long slgt_compat_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct slgt_info *info = tty->driver_data; - int rc = -ENOIOCTLCMD; - - if (sanity_check(info, tty->name, "compat_ioctl")) - return -ENODEV; - DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd)); - - switch (cmd) { - - case MGSL_IOCSPARAMS32: - rc = set_params32(info, compat_ptr(arg)); - break; - - case MGSL_IOCGPARAMS32: - rc = get_params32(info, compat_ptr(arg)); - break; - - case MGSL_IOCGPARAMS: - case MGSL_IOCSPARAMS: - case MGSL_IOCGTXIDLE: - case MGSL_IOCGSTATS: - case MGSL_IOCWAITEVENT: - case MGSL_IOCGIF: - case MGSL_IOCSGPIO: - case MGSL_IOCGGPIO: - case MGSL_IOCWAITGPIO: - case MGSL_IOCGXSYNC: - case MGSL_IOCGXCTRL: - case MGSL_IOCSTXIDLE: - case MGSL_IOCTXENABLE: - case MGSL_IOCRXENABLE: - case MGSL_IOCTXABORT: - case TIOCMIWAIT: - case MGSL_IOCSIF: - case MGSL_IOCSXSYNC: - case MGSL_IOCSXCTRL: - rc = ioctl(tty, cmd, arg); - break; - } - - DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc)); - return rc; -} -#else -#define slgt_compat_ioctl NULL -#endif /* ifdef CONFIG_COMPAT */ - -/* - * proc fs support - */ -static inline void line_info(struct seq_file *m, struct slgt_info *info) -{ - char stat_buf[30]; - unsigned long flags; - - seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n", - info->device_name, info->phys_reg_addr, - info->irq_level, info->max_frame_size); - - /* output current serial signal states */ - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (info->signals & SerialSignal_RTS) - strcat(stat_buf, "|RTS"); - if (info->signals & SerialSignal_CTS) - strcat(stat_buf, "|CTS"); - if (info->signals & SerialSignal_DTR) - strcat(stat_buf, "|DTR"); - if (info->signals & SerialSignal_DSR) - strcat(stat_buf, "|DSR"); - if (info->signals & SerialSignal_DCD) - strcat(stat_buf, "|CD"); - if (info->signals & SerialSignal_RI) - strcat(stat_buf, "|RI"); - - if (info->params.mode != MGSL_MODE_ASYNC) { - seq_printf(m, "\tHDLC txok:%d rxok:%d", - info->icount.txok, info->icount.rxok); - if (info->icount.txunder) - seq_printf(m, " txunder:%d", info->icount.txunder); - if (info->icount.txabort) - seq_printf(m, " txabort:%d", info->icount.txabort); - if (info->icount.rxshort) - seq_printf(m, " rxshort:%d", info->icount.rxshort); - if (info->icount.rxlong) - seq_printf(m, " rxlong:%d", info->icount.rxlong); - if (info->icount.rxover) - seq_printf(m, " rxover:%d", info->icount.rxover); - if (info->icount.rxcrc) - seq_printf(m, " rxcrc:%d", info->icount.rxcrc); - } else { - seq_printf(m, "\tASYNC tx:%d rx:%d", - info->icount.tx, info->icount.rx); - if (info->icount.frame) - seq_printf(m, " fe:%d", info->icount.frame); - if (info->icount.parity) - seq_printf(m, " pe:%d", info->icount.parity); - if (info->icount.brk) - seq_printf(m, " brk:%d", info->icount.brk); - if (info->icount.overrun) - seq_printf(m, " oe:%d", info->icount.overrun); - } - - /* Append serial signal status to end */ - seq_printf(m, " %s\n", stat_buf+1); - - seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", - info->tx_active,info->bh_requested,info->bh_running, - info->pending_bh); -} - -/* Called to print information about devices - */ -static int synclink_gt_proc_show(struct seq_file *m, void *v) -{ - struct slgt_info *info; - - seq_puts(m, "synclink_gt driver\n"); - - info = slgt_device_list; - while( info ) { - line_info(m, info); - info = info->next_device; - } - return 0; -} - -static int synclink_gt_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, synclink_gt_proc_show, NULL); -} - -static const struct file_operations synclink_gt_proc_fops = { - .owner = THIS_MODULE, - .open = synclink_gt_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * return count of bytes in transmit buffer - */ -static int chars_in_buffer(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - int count; - if (sanity_check(info, tty->name, "chars_in_buffer")) - return 0; - count = tbuf_bytes(info); - DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count)); - return count; -} - -/* - * signal remote device to throttle send data (our receive data) - */ -static void throttle(struct tty_struct * tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "throttle")) - return; - DBGINFO(("%s throttle\n", info->device_name)); - if (I_IXOFF(tty)) - send_xchar(tty, STOP_CHAR(tty)); - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); - info->signals &= ~SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* - * signal remote device to stop throttling send data (our receive data) - */ -static void unthrottle(struct tty_struct * tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "unthrottle")) - return; - DBGINFO(("%s unthrottle\n", info->device_name)); - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - send_xchar(tty, START_CHAR(tty)); - } - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); - info->signals |= SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* - * set or clear transmit break condition - * break_state -1=set break condition, 0=clear - */ -static int set_break(struct tty_struct *tty, int break_state) -{ - struct slgt_info *info = tty->driver_data; - unsigned short value; - unsigned long flags; - - if (sanity_check(info, tty->name, "set_break")) - return -EINVAL; - DBGINFO(("%s set_break(%d)\n", info->device_name, break_state)); - - spin_lock_irqsave(&info->lock,flags); - value = rd_reg16(info, TCR); - if (break_state == -1) - value |= BIT6; - else - value &= ~BIT6; - wr_reg16(info, TCR, value); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -#if SYNCLINK_GENERIC_HDLC - -/** - * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) - * set encoding and frame check sequence (FCS) options - * - * dev pointer to network device structure - * encoding serial encoding setting - * parity FCS setting - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - struct slgt_info *info = dev_to_port(dev); - unsigned char new_encoding; - unsigned short new_crctype; - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - DBGINFO(("%s hdlcdev_attach\n", info->device_name)); - - switch (encoding) - { - case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; - case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; - case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; - case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; - case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; - default: return -EINVAL; - } - - switch (parity) - { - case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; - case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; - case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; - default: return -EINVAL; - } - - info->params.encoding = new_encoding; - info->params.crc_type = new_crctype; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - - return 0; -} - -/** - * called by generic HDLC layer to send frame - * - * skb socket buffer containing HDLC frame - * dev pointer to network device structure - */ -static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct slgt_info *info = dev_to_port(dev); - unsigned long flags; - - DBGINFO(("%s hdlc_xmit\n", dev->name)); - - if (!skb->len) - return NETDEV_TX_OK; - - /* stop sending until this frame completes */ - netif_stop_queue(dev); - - /* update network statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - - /* save start time for transmit timeout detection */ - dev->trans_start = jiffies; - - spin_lock_irqsave(&info->lock, flags); - tx_load(info, skb->data, skb->len); - spin_unlock_irqrestore(&info->lock, flags); - - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - -/** - * called by network layer when interface enabled - * claim resources and initialize hardware - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_open(struct net_device *dev) -{ - struct slgt_info *info = dev_to_port(dev); - int rc; - unsigned long flags; - - if (!try_module_get(THIS_MODULE)) - return -EBUSY; - - DBGINFO(("%s hdlcdev_open\n", dev->name)); - - /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) - return rc; - - /* arbitrate between network and tty opens */ - spin_lock_irqsave(&info->netlock, flags); - if (info->port.count != 0 || info->netcount != 0) { - DBGINFO(("%s hdlc_open busy\n", dev->name)); - spin_unlock_irqrestore(&info->netlock, flags); - return -EBUSY; - } - info->netcount=1; - spin_unlock_irqrestore(&info->netlock, flags); - - /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - return rc; - } - - /* assert DTR and RTS, apply hardware settings */ - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - program_hw(info); - - /* enable network layer transmit */ - dev->trans_start = jiffies; - netif_start_queue(dev); - - /* inform generic HDLC layer of current DCD status */ - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - if (info->signals & SerialSignal_DCD) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - return 0; -} - -/** - * called by network layer when interface is disabled - * shutdown hardware and release resources - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_close(struct net_device *dev) -{ - struct slgt_info *info = dev_to_port(dev); - unsigned long flags; - - DBGINFO(("%s hdlcdev_close\n", dev->name)); - - netif_stop_queue(dev); - - /* shutdown adapter and release resources */ - shutdown(info); - - hdlc_close(dev); - - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - - module_put(THIS_MODULE); - return 0; -} - -/** - * called by network layer to process IOCTL call to network device - * - * dev pointer to network device structure - * ifr pointer to network interface request structure - * cmd IOCTL command code - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - const size_t size = sizeof(sync_serial_settings); - sync_serial_settings new_line; - sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; - struct slgt_info *info = dev_to_port(dev); - unsigned int flags; - - DBGINFO(("%s hdlcdev_ioctl\n", dev->name)); - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - if (cmd != SIOCWANDEV) - return hdlc_ioctl(dev, ifr, cmd); - - memset(&new_line, 0, sizeof(new_line)); - - switch(ifr->ifr_settings.type) { - case IF_GET_IFACE: /* return current sync_serial_settings */ - - ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; - if (ifr->ifr_settings.size < size) { - ifr->ifr_settings.size = size; /* data size wanted */ - return -ENOBUFS; - } - - flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - - switch (flags){ - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; - case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; - default: new_line.clock_type = CLOCK_DEFAULT; - } - - new_line.clock_rate = info->params.clock_speed; - new_line.loopback = info->params.loopback ? 1:0; - - if (copy_to_user(line, &new_line, size)) - return -EFAULT; - return 0; - - case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&new_line, line, size)) - return -EFAULT; - - switch (new_line.clock_type) - { - case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; - case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; - case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; - case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; - case CLOCK_DEFAULT: flags = info->params.flags & - (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; - default: return -EINVAL; - } - - if (new_line.loopback != 0 && new_line.loopback != 1) - return -EINVAL; - - info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - info->params.flags |= flags; - - info->params.loopback = new_line.loopback; - - if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) - info->params.clock_speed = new_line.clock_rate; - else - info->params.clock_speed = 0; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - return 0; - - default: - return hdlc_ioctl(dev, ifr, cmd); - } -} - -/** - * called by network layer when transmit timeout is detected - * - * dev pointer to network device structure - */ -static void hdlcdev_tx_timeout(struct net_device *dev) -{ - struct slgt_info *info = dev_to_port(dev); - unsigned long flags; - - DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name)); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - spin_lock_irqsave(&info->lock,flags); - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); - - netif_wake_queue(dev); -} - -/** - * called by device driver when transmit completes - * reenable network layer transmit if stopped - * - * info pointer to device instance information - */ -static void hdlcdev_tx_done(struct slgt_info *info) -{ - if (netif_queue_stopped(info->netdev)) - netif_wake_queue(info->netdev); -} - -/** - * called by device driver when frame received - * pass frame to network layer - * - * info pointer to device instance information - * buf pointer to buffer contianing frame data - * size count of data bytes in buf - */ -static void hdlcdev_rx(struct slgt_info *info, char *buf, int size) -{ - struct sk_buff *skb = dev_alloc_skb(size); - struct net_device *dev = info->netdev; - - DBGINFO(("%s hdlcdev_rx\n", dev->name)); - - if (skb == NULL) { - DBGERR(("%s: can't alloc skb, drop packet\n", dev->name)); - dev->stats.rx_dropped++; - return; - } - - memcpy(skb_put(skb, size), buf, size); - - skb->protocol = hdlc_type_trans(skb, dev); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - - netif_rx(skb); -} - -static const struct net_device_ops hdlcdev_ops = { - .ndo_open = hdlcdev_open, - .ndo_stop = hdlcdev_close, - .ndo_change_mtu = hdlc_change_mtu, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_do_ioctl = hdlcdev_ioctl, - .ndo_tx_timeout = hdlcdev_tx_timeout, -}; - -/** - * called by device driver when adding device instance - * do generic HDLC initialization - * - * info pointer to device instance information - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_init(struct slgt_info *info) -{ - int rc; - struct net_device *dev; - hdlc_device *hdlc; - - /* allocate and initialize network and HDLC layer objects */ - - if (!(dev = alloc_hdlcdev(info))) { - printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); - return -ENOMEM; - } - - /* for network layer reporting purposes only */ - dev->mem_start = info->phys_reg_addr; - dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1; - dev->irq = info->irq_level; - - /* network layer callbacks and settings */ - dev->netdev_ops = &hdlcdev_ops; - dev->watchdog_timeo = 10 * HZ; - dev->tx_queue_len = 50; - - /* generic HDLC layer callbacks and settings */ - hdlc = dev_to_hdlc(dev); - hdlc->attach = hdlcdev_attach; - hdlc->xmit = hdlcdev_xmit; - - /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { - printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); - free_netdev(dev); - return rc; - } - - info->netdev = dev; - return 0; -} - -/** - * called by device driver when removing device instance - * do generic HDLC cleanup - * - * info pointer to device instance information - */ -static void hdlcdev_exit(struct slgt_info *info) -{ - unregister_hdlc_device(info->netdev); - free_netdev(info->netdev); - info->netdev = NULL; -} - -#endif /* ifdef CONFIG_HDLC */ - -/* - * get async data from rx DMA buffers - */ -static void rx_async(struct slgt_info *info) -{ - struct tty_struct *tty = info->port.tty; - struct mgsl_icount *icount = &info->icount; - unsigned int start, end; - unsigned char *p; - unsigned char status; - struct slgt_desc *bufs = info->rbufs; - int i, count; - int chars = 0; - int stat; - unsigned char ch; - - start = end = info->rbuf_current; - - while(desc_complete(bufs[end])) { - count = desc_count(bufs[end]) - info->rbuf_index; - p = bufs[end].buf + info->rbuf_index; - - DBGISR(("%s rx_async count=%d\n", info->device_name, count)); - DBGDATA(info, p, count, "rx"); - - for(i=0 ; i < count; i+=2, p+=2) { - ch = *p; - icount->rx++; - - stat = 0; - - if ((status = *(p+1) & (BIT1 + BIT0))) { - if (status & BIT1) - icount->parity++; - else if (status & BIT0) - icount->frame++; - /* discard char if tty control flags say so */ - if (status & info->ignore_status_mask) - continue; - if (status & BIT1) - stat = TTY_PARITY; - else if (status & BIT0) - stat = TTY_FRAME; - } - if (tty) { - tty_insert_flip_char(tty, ch, stat); - chars++; - } - } - - if (i < count) { - /* receive buffer not completed */ - info->rbuf_index += i; - mod_timer(&info->rx_timer, jiffies + 1); - break; - } - - info->rbuf_index = 0; - free_rbufs(info, end, end); - - if (++end == info->rbuf_count) - end = 0; - - /* if entire list searched then no frame available */ - if (end == start) - break; - } - - if (tty && chars) - tty_flip_buffer_push(tty); -} - -/* - * return next bottom half action to perform - */ -static int bh_action(struct slgt_info *info) -{ - unsigned long flags; - int rc; - - spin_lock_irqsave(&info->lock,flags); - - if (info->pending_bh & BH_RECEIVE) { - info->pending_bh &= ~BH_RECEIVE; - rc = BH_RECEIVE; - } else if (info->pending_bh & BH_TRANSMIT) { - info->pending_bh &= ~BH_TRANSMIT; - rc = BH_TRANSMIT; - } else if (info->pending_bh & BH_STATUS) { - info->pending_bh &= ~BH_STATUS; - rc = BH_STATUS; - } else { - /* Mark BH routine as complete */ - info->bh_running = false; - info->bh_requested = false; - rc = 0; - } - - spin_unlock_irqrestore(&info->lock,flags); - - return rc; -} - -/* - * perform bottom half processing - */ -static void bh_handler(struct work_struct *work) -{ - struct slgt_info *info = container_of(work, struct slgt_info, task); - int action; - - if (!info) - return; - info->bh_running = true; - - while((action = bh_action(info))) { - switch (action) { - case BH_RECEIVE: - DBGBH(("%s bh receive\n", info->device_name)); - switch(info->params.mode) { - case MGSL_MODE_ASYNC: - rx_async(info); - break; - case MGSL_MODE_HDLC: - while(rx_get_frame(info)); - break; - case MGSL_MODE_RAW: - case MGSL_MODE_MONOSYNC: - case MGSL_MODE_BISYNC: - case MGSL_MODE_XSYNC: - while(rx_get_buf(info)); - break; - } - /* restart receiver if rx DMA buffers exhausted */ - if (info->rx_restart) - rx_start(info); - break; - case BH_TRANSMIT: - bh_transmit(info); - break; - case BH_STATUS: - DBGBH(("%s bh status\n", info->device_name)); - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - break; - default: - DBGBH(("%s unknown action\n", info->device_name)); - break; - } - } - DBGBH(("%s bh_handler exit\n", info->device_name)); -} - -static void bh_transmit(struct slgt_info *info) -{ - struct tty_struct *tty = info->port.tty; - - DBGBH(("%s bh_transmit\n", info->device_name)); - if (tty) - tty_wakeup(tty); -} - -static void dsr_change(struct slgt_info *info, unsigned short status) -{ - if (status & BIT3) { - info->signals |= SerialSignal_DSR; - info->input_signal_events.dsr_up++; - } else { - info->signals &= ~SerialSignal_DSR; - info->input_signal_events.dsr_down++; - } - DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals)); - if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { - slgt_irq_off(info, IRQ_DSR); - return; - } - info->icount.dsr++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; -} - -static void cts_change(struct slgt_info *info, unsigned short status) -{ - if (status & BIT2) { - info->signals |= SerialSignal_CTS; - info->input_signal_events.cts_up++; - } else { - info->signals &= ~SerialSignal_CTS; - info->input_signal_events.cts_down++; - } - DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals)); - if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { - slgt_irq_off(info, IRQ_CTS); - return; - } - info->icount.cts++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; - - if (info->port.flags & ASYNC_CTS_FLOW) { - if (info->port.tty) { - if (info->port.tty->hw_stopped) { - if (info->signals & SerialSignal_CTS) { - info->port.tty->hw_stopped = 0; - info->pending_bh |= BH_TRANSMIT; - return; - } - } else { - if (!(info->signals & SerialSignal_CTS)) - info->port.tty->hw_stopped = 1; - } - } - } -} - -static void dcd_change(struct slgt_info *info, unsigned short status) -{ - if (status & BIT1) { - info->signals |= SerialSignal_DCD; - info->input_signal_events.dcd_up++; - } else { - info->signals &= ~SerialSignal_DCD; - info->input_signal_events.dcd_down++; - } - DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals)); - if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { - slgt_irq_off(info, IRQ_DCD); - return; - } - info->icount.dcd++; -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) { - if (info->signals & SerialSignal_DCD) - netif_carrier_on(info->netdev); - else - netif_carrier_off(info->netdev); - } -#endif - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; - - if (info->port.flags & ASYNC_CHECK_CD) { - if (info->signals & SerialSignal_DCD) - wake_up_interruptible(&info->port.open_wait); - else { - if (info->port.tty) - tty_hangup(info->port.tty); - } - } -} - -static void ri_change(struct slgt_info *info, unsigned short status) -{ - if (status & BIT0) { - info->signals |= SerialSignal_RI; - info->input_signal_events.ri_up++; - } else { - info->signals &= ~SerialSignal_RI; - info->input_signal_events.ri_down++; - } - DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals)); - if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { - slgt_irq_off(info, IRQ_RI); - return; - } - info->icount.rng++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; -} - -static void isr_rxdata(struct slgt_info *info) -{ - unsigned int count = info->rbuf_fill_count; - unsigned int i = info->rbuf_fill_index; - unsigned short reg; - - while (rd_reg16(info, SSR) & IRQ_RXDATA) { - reg = rd_reg16(info, RDR); - DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); - if (desc_complete(info->rbufs[i])) { - /* all buffers full */ - rx_stop(info); - info->rx_restart = 1; - continue; - } - info->rbufs[i].buf[count++] = (unsigned char)reg; - /* async mode saves status byte to buffer for each data byte */ - if (info->params.mode == MGSL_MODE_ASYNC) - info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); - if (count == info->rbuf_fill_level || (reg & BIT10)) { - /* buffer full or end of frame */ - set_desc_count(info->rbufs[i], count); - set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); - info->rbuf_fill_count = count = 0; - if (++i == info->rbuf_count) - i = 0; - info->pending_bh |= BH_RECEIVE; - } - } - - info->rbuf_fill_index = i; - info->rbuf_fill_count = count; -} - -static void isr_serial(struct slgt_info *info) -{ - unsigned short status = rd_reg16(info, SSR); - - DBGISR(("%s isr_serial status=%04X\n", info->device_name, status)); - - wr_reg16(info, SSR, status); /* clear pending */ - - info->irq_occurred = true; - - if (info->params.mode == MGSL_MODE_ASYNC) { - if (status & IRQ_TXIDLE) { - if (info->tx_active) - isr_txeom(info, status); - } - if (info->rx_pio && (status & IRQ_RXDATA)) - isr_rxdata(info); - if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { - info->icount.brk++; - /* process break detection if tty control allows */ - if (info->port.tty) { - if (!(status & info->ignore_status_mask)) { - if (info->read_status_mask & MASK_BREAK) { - tty_insert_flip_char(info->port.tty, 0, TTY_BREAK); - if (info->port.flags & ASYNC_SAK) - do_SAK(info->port.tty); - } - } - } - } - } else { - if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) - isr_txeom(info, status); - if (info->rx_pio && (status & IRQ_RXDATA)) - isr_rxdata(info); - if (status & IRQ_RXIDLE) { - if (status & RXIDLE) - info->icount.rxidle++; - else - info->icount.exithunt++; - wake_up_interruptible(&info->event_wait_q); - } - - if (status & IRQ_RXOVER) - rx_start(info); - } - - if (status & IRQ_DSR) - dsr_change(info, status); - if (status & IRQ_CTS) - cts_change(info, status); - if (status & IRQ_DCD) - dcd_change(info, status); - if (status & IRQ_RI) - ri_change(info, status); -} - -static void isr_rdma(struct slgt_info *info) -{ - unsigned int status = rd_reg32(info, RDCSR); - - DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status)); - - /* RDCSR (rx DMA control/status) - * - * 31..07 reserved - * 06 save status byte to DMA buffer - * 05 error - * 04 eol (end of list) - * 03 eob (end of buffer) - * 02 IRQ enable - * 01 reset - * 00 enable - */ - wr_reg32(info, RDCSR, status); /* clear pending */ - - if (status & (BIT5 + BIT4)) { - DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name)); - info->rx_restart = true; - } - info->pending_bh |= BH_RECEIVE; -} - -static void isr_tdma(struct slgt_info *info) -{ - unsigned int status = rd_reg32(info, TDCSR); - - DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status)); - - /* TDCSR (tx DMA control/status) - * - * 31..06 reserved - * 05 error - * 04 eol (end of list) - * 03 eob (end of buffer) - * 02 IRQ enable - * 01 reset - * 00 enable - */ - wr_reg32(info, TDCSR, status); /* clear pending */ - - if (status & (BIT5 + BIT4 + BIT3)) { - // another transmit buffer has completed - // run bottom half to get more send data from user - info->pending_bh |= BH_TRANSMIT; - } -} - -/* - * return true if there are unsent tx DMA buffers, otherwise false - * - * if there are unsent buffers then info->tbuf_start - * is set to index of first unsent buffer - */ -static bool unsent_tbufs(struct slgt_info *info) -{ - unsigned int i = info->tbuf_current; - bool rc = false; - - /* - * search backwards from last loaded buffer (precedes tbuf_current) - * for first unsent buffer (desc_count > 0) - */ - - do { - if (i) - i--; - else - i = info->tbuf_count - 1; - if (!desc_count(info->tbufs[i])) - break; - info->tbuf_start = i; - rc = true; - } while (i != info->tbuf_current); - - return rc; -} - -static void isr_txeom(struct slgt_info *info, unsigned short status) -{ - DBGISR(("%s txeom status=%04x\n", info->device_name, status)); - - slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); - tdma_reset(info); - if (status & IRQ_TXUNDER) { - unsigned short val = rd_reg16(info, TCR); - wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ - wr_reg16(info, TCR, val); /* clear reset bit */ - } - - if (info->tx_active) { - if (info->params.mode != MGSL_MODE_ASYNC) { - if (status & IRQ_TXUNDER) - info->icount.txunder++; - else if (status & IRQ_TXIDLE) - info->icount.txok++; - } - - if (unsent_tbufs(info)) { - tx_start(info); - update_tx_timer(info); - return; - } - info->tx_active = false; - - del_timer(&info->tx_timer); - - if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { - info->signals &= ~SerialSignal_RTS; - info->drop_rts_on_tx_done = false; - set_signals(info); - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { - tx_stop(info); - return; - } - info->pending_bh |= BH_TRANSMIT; - } - } -} - -static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state) -{ - struct cond_wait *w, *prev; - - /* wake processes waiting for specific transitions */ - for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) { - if (w->data & changed) { - w->data = state; - wake_up_interruptible(&w->q); - if (prev != NULL) - prev->next = w->next; - else - info->gpio_wait_q = w->next; - } else - prev = w; - } -} - -/* interrupt service routine - * - * irq interrupt number - * dev_id device ID supplied during interrupt registration - */ -static irqreturn_t slgt_interrupt(int dummy, void *dev_id) -{ - struct slgt_info *info = dev_id; - unsigned int gsr; - unsigned int i; - - DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level)); - - while((gsr = rd_reg32(info, GSR) & 0xffffff00)) { - DBGISR(("%s gsr=%08x\n", info->device_name, gsr)); - info->irq_occurred = true; - for(i=0; i < info->port_count ; i++) { - if (info->port_array[i] == NULL) - continue; - spin_lock(&info->port_array[i]->lock); - if (gsr & (BIT8 << i)) - isr_serial(info->port_array[i]); - if (gsr & (BIT16 << (i*2))) - isr_rdma(info->port_array[i]); - if (gsr & (BIT17 << (i*2))) - isr_tdma(info->port_array[i]); - spin_unlock(&info->port_array[i]->lock); - } - } - - if (info->gpio_present) { - unsigned int state; - unsigned int changed; - spin_lock(&info->lock); - while ((changed = rd_reg32(info, IOSR)) != 0) { - DBGISR(("%s iosr=%08x\n", info->device_name, changed)); - /* read latched state of GPIO signals */ - state = rd_reg32(info, IOVR); - /* clear pending GPIO interrupt bits */ - wr_reg32(info, IOSR, changed); - for (i=0 ; i < info->port_count ; i++) { - if (info->port_array[i] != NULL) - isr_gpio(info->port_array[i], changed, state); - } - } - spin_unlock(&info->lock); - } - - for(i=0; i < info->port_count ; i++) { - struct slgt_info *port = info->port_array[i]; - if (port == NULL) - continue; - spin_lock(&port->lock); - if ((port->port.count || port->netcount) && - port->pending_bh && !port->bh_running && - !port->bh_requested) { - DBGISR(("%s bh queued\n", port->device_name)); - schedule_work(&port->task); - port->bh_requested = true; - } - spin_unlock(&port->lock); - } - - DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level)); - return IRQ_HANDLED; -} - -static int startup(struct slgt_info *info) -{ - DBGINFO(("%s startup\n", info->device_name)); - - if (info->port.flags & ASYNC_INITIALIZED) - return 0; - - if (!info->tx_buf) { - info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); - if (!info->tx_buf) { - DBGERR(("%s can't allocate tx buffer\n", info->device_name)); - return -ENOMEM; - } - } - - info->pending_bh = 0; - - memset(&info->icount, 0, sizeof(info->icount)); - - /* program hardware for current parameters */ - change_params(info); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags |= ASYNC_INITIALIZED; - - return 0; -} - -/* - * called by close() and hangup() to shutdown hardware - */ -static void shutdown(struct slgt_info *info) -{ - unsigned long flags; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - - DBGINFO(("%s shutdown\n", info->device_name)); - - /* clear status wait queue because status changes */ - /* can't happen after shutting down the hardware */ - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - del_timer_sync(&info->tx_timer); - del_timer_sync(&info->rx_timer); - - kfree(info->tx_buf); - info->tx_buf = NULL; - - spin_lock_irqsave(&info->lock,flags); - - tx_stop(info); - rx_stop(info); - - slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); - - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { - info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - set_signals(info); - } - - flush_cond_wait(&info->gpio_wait_q); - - spin_unlock_irqrestore(&info->lock,flags); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; -} - -static void program_hw(struct slgt_info *info) -{ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - - rx_stop(info); - tx_stop(info); - - if (info->params.mode != MGSL_MODE_ASYNC || - info->netcount) - sync_mode(info); - else - async_mode(info); - - set_signals(info); - - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - - slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); - get_signals(info); - - if (info->netcount || - (info->port.tty && info->port.tty->termios->c_cflag & CREAD)) - rx_start(info); - - spin_unlock_irqrestore(&info->lock,flags); -} - -/* - * reconfigure adapter based on new parameters - */ -static void change_params(struct slgt_info *info) -{ - unsigned cflag; - int bits_per_char; - - if (!info->port.tty || !info->port.tty->termios) - return; - DBGINFO(("%s change_params\n", info->device_name)); - - cflag = info->port.tty->termios->c_cflag; - - /* if B0 rate (hangup) specified then negate DTR and RTS */ - /* otherwise assert DTR and RTS */ - if (cflag & CBAUD) - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - - /* byte size and parity */ - - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - default: info->params.data_bits = 7; break; - } - - info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1; - - if (cflag & PARENB) - info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN; - else - info->params.parity = ASYNC_PARITY_NONE; - - /* calculate number of jiffies to transmit a full - * FIFO (32 bytes) at specified data rate - */ - bits_per_char = info->params.data_bits + - info->params.stop_bits + 1; - - info->params.data_rate = tty_get_baud_rate(info->port.tty); - - if (info->params.data_rate) { - info->timeout = (32*HZ*bits_per_char) / - info->params.data_rate; - } - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - if (cflag & CRTSCTS) - info->port.flags |= ASYNC_CTS_FLOW; - else - info->port.flags &= ~ASYNC_CTS_FLOW; - - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - /* process tty input control flags */ - - info->read_status_mask = IRQ_RXOVER; - if (I_INPCK(info->port.tty)) - info->read_status_mask |= MASK_PARITY | MASK_FRAMING; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= MASK_BREAK; - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= MASK_BREAK; - /* If ignoring parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= MASK_OVERRUN; - } - - program_hw(info); -} - -static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount) -{ - DBGINFO(("%s get_stats\n", info->device_name)); - if (!user_icount) { - memset(&info->icount, 0, sizeof(info->icount)); - } else { - if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount))) - return -EFAULT; - } - return 0; -} - -static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params) -{ - DBGINFO(("%s get_params\n", info->device_name)); - if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS))) - return -EFAULT; - return 0; -} - -static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params) -{ - unsigned long flags; - MGSL_PARAMS tmp_params; - - DBGINFO(("%s set_params\n", info->device_name)); - if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS))) - return -EFAULT; - - spin_lock_irqsave(&info->lock, flags); - if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) - info->base_clock = tmp_params.clock_speed; - else - memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->lock, flags); - - program_hw(info); - - return 0; -} - -static int get_txidle(struct slgt_info *info, int __user *idle_mode) -{ - DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode)); - if (put_user(info->idle_mode, idle_mode)) - return -EFAULT; - return 0; -} - -static int set_txidle(struct slgt_info *info, int idle_mode) -{ - unsigned long flags; - DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode)); - spin_lock_irqsave(&info->lock,flags); - info->idle_mode = idle_mode; - if (info->params.mode != MGSL_MODE_ASYNC) - tx_set_idle(info); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int tx_enable(struct slgt_info *info, int enable) -{ - unsigned long flags; - DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable)); - spin_lock_irqsave(&info->lock,flags); - if (enable) { - if (!info->tx_enabled) - tx_start(info); - } else { - if (info->tx_enabled) - tx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* - * abort transmit HDLC frame - */ -static int tx_abort(struct slgt_info *info) -{ - unsigned long flags; - DBGINFO(("%s tx_abort\n", info->device_name)); - spin_lock_irqsave(&info->lock,flags); - tdma_reset(info); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int rx_enable(struct slgt_info *info, int enable) -{ - unsigned long flags; - unsigned int rbuf_fill_level; - DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable)); - spin_lock_irqsave(&info->lock,flags); - /* - * enable[31..16] = receive DMA buffer fill level - * 0 = noop (leave fill level unchanged) - * fill level must be multiple of 4 and <= buffer size - */ - rbuf_fill_level = ((unsigned int)enable) >> 16; - if (rbuf_fill_level) { - if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) { - spin_unlock_irqrestore(&info->lock, flags); - return -EINVAL; - } - info->rbuf_fill_level = rbuf_fill_level; - if (rbuf_fill_level < 128) - info->rx_pio = 1; /* PIO mode */ - else - info->rx_pio = 0; /* DMA mode */ - rx_stop(info); /* restart receiver to use new fill level */ - } - - /* - * enable[1..0] = receiver enable command - * 0 = disable - * 1 = enable - * 2 = enable or force hunt mode if already enabled - */ - enable &= 3; - if (enable) { - if (!info->rx_enabled) - rx_start(info); - else if (enable == 2) { - /* force hunt mode (write 1 to RCR[3]) */ - wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3); - } - } else { - if (info->rx_enabled) - rx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* - * wait for specified event to occur - */ -static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) -{ - unsigned long flags; - int s; - int rc=0; - struct mgsl_icount cprev, cnow; - int events; - int mask; - struct _input_signal_events oldsigs, newsigs; - DECLARE_WAITQUEUE(wait, current); - - if (get_user(mask, mask_ptr)) - return -EFAULT; - - DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask)); - - spin_lock_irqsave(&info->lock,flags); - - /* return immediately if state matches requested events */ - get_signals(info); - s = info->signals; - - events = mask & - ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + - ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + - ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); - if (events) { - spin_unlock_irqrestore(&info->lock,flags); - goto exit; - } - - /* save current irq counts */ - cprev = info->icount; - oldsigs = info->input_signal_events; - - /* enable hunt and idle irqs if needed */ - if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { - unsigned short val = rd_reg16(info, SCR); - if (!(val & IRQ_RXIDLE)) - wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE)); - } - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&info->event_wait_q, &wait); - - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - newsigs = info->input_signal_events; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (newsigs.dsr_up == oldsigs.dsr_up && - newsigs.dsr_down == oldsigs.dsr_down && - newsigs.dcd_up == oldsigs.dcd_up && - newsigs.dcd_down == oldsigs.dcd_down && - newsigs.cts_up == oldsigs.cts_up && - newsigs.cts_down == oldsigs.cts_down && - newsigs.ri_up == oldsigs.ri_up && - newsigs.ri_down == oldsigs.ri_down && - cnow.exithunt == cprev.exithunt && - cnow.rxidle == cprev.rxidle) { - rc = -EIO; - break; - } - - events = mask & - ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + - (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + - (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + - (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + - (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + - (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + - (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + - (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + - (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + - (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); - if (events) - break; - - cprev = cnow; - oldsigs = newsigs; - } - - remove_wait_queue(&info->event_wait_q, &wait); - set_current_state(TASK_RUNNING); - - - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - spin_lock_irqsave(&info->lock,flags); - if (!waitqueue_active(&info->event_wait_q)) { - /* disable enable exit hunt mode/idle rcvd IRQs */ - wr_reg16(info, SCR, - (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE)); - } - spin_unlock_irqrestore(&info->lock,flags); - } -exit: - if (rc == 0) - rc = put_user(events, mask_ptr); - return rc; -} - -static int get_interface(struct slgt_info *info, int __user *if_mode) -{ - DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode)); - if (put_user(info->if_mode, if_mode)) - return -EFAULT; - return 0; -} - -static int set_interface(struct slgt_info *info, int if_mode) -{ - unsigned long flags; - unsigned short val; - - DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode)); - spin_lock_irqsave(&info->lock,flags); - info->if_mode = if_mode; - - msc_set_vcr(info); - - /* TCR (tx control) 07 1=RTS driver control */ - val = rd_reg16(info, TCR); - if (info->if_mode & MGSL_INTERFACE_RTS_EN) - val |= BIT7; - else - val &= ~BIT7; - wr_reg16(info, TCR, val); - - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int get_xsync(struct slgt_info *info, int __user *xsync) -{ - DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync)); - if (put_user(info->xsync, xsync)) - return -EFAULT; - return 0; -} - -/* - * set extended sync pattern (1 to 4 bytes) for extended sync mode - * - * sync pattern is contained in least significant bytes of value - * most significant byte of sync pattern is oldest (1st sent/detected) - */ -static int set_xsync(struct slgt_info *info, int xsync) -{ - unsigned long flags; - - DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync)); - spin_lock_irqsave(&info->lock, flags); - info->xsync = xsync; - wr_reg32(info, XSR, xsync); - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -static int get_xctrl(struct slgt_info *info, int __user *xctrl) -{ - DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl)); - if (put_user(info->xctrl, xctrl)) - return -EFAULT; - return 0; -} - -/* - * set extended control options - * - * xctrl[31:19] reserved, must be zero - * xctrl[18:17] extended sync pattern length in bytes - * 00 = 1 byte in xsr[7:0] - * 01 = 2 bytes in xsr[15:0] - * 10 = 3 bytes in xsr[23:0] - * 11 = 4 bytes in xsr[31:0] - * xctrl[16] 1 = enable terminal count, 0=disabled - * xctrl[15:0] receive terminal count for fixed length packets - * value is count minus one (0 = 1 byte packet) - * when terminal count is reached, receiver - * automatically returns to hunt mode and receive - * FIFO contents are flushed to DMA buffers with - * end of frame (EOF) status - */ -static int set_xctrl(struct slgt_info *info, int xctrl) -{ - unsigned long flags; - - DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl)); - spin_lock_irqsave(&info->lock, flags); - info->xctrl = xctrl; - wr_reg32(info, XCR, xctrl); - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -/* - * set general purpose IO pin state and direction - * - * user_gpio fields: - * state each bit indicates a pin state - * smask set bit indicates pin state to set - * dir each bit indicates a pin direction (0=input, 1=output) - * dmask set bit indicates pin direction to set - */ -static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) -{ - unsigned long flags; - struct gpio_desc gpio; - __u32 data; - - if (!info->gpio_present) - return -EINVAL; - if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) - return -EFAULT; - DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n", - info->device_name, gpio.state, gpio.smask, - gpio.dir, gpio.dmask)); - - spin_lock_irqsave(&info->port_array[0]->lock, flags); - if (gpio.dmask) { - data = rd_reg32(info, IODR); - data |= gpio.dmask & gpio.dir; - data &= ~(gpio.dmask & ~gpio.dir); - wr_reg32(info, IODR, data); - } - if (gpio.smask) { - data = rd_reg32(info, IOVR); - data |= gpio.smask & gpio.state; - data &= ~(gpio.smask & ~gpio.state); - wr_reg32(info, IOVR, data); - } - spin_unlock_irqrestore(&info->port_array[0]->lock, flags); - - return 0; -} - -/* - * get general purpose IO pin state and direction - */ -static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) -{ - struct gpio_desc gpio; - if (!info->gpio_present) - return -EINVAL; - gpio.state = rd_reg32(info, IOVR); - gpio.smask = 0xffffffff; - gpio.dir = rd_reg32(info, IODR); - gpio.dmask = 0xffffffff; - if (copy_to_user(user_gpio, &gpio, sizeof(gpio))) - return -EFAULT; - DBGINFO(("%s get_gpio state=%08x dir=%08x\n", - info->device_name, gpio.state, gpio.dir)); - return 0; -} - -/* - * conditional wait facility - */ -static void init_cond_wait(struct cond_wait *w, unsigned int data) -{ - init_waitqueue_head(&w->q); - init_waitqueue_entry(&w->wait, current); - w->data = data; -} - -static void add_cond_wait(struct cond_wait **head, struct cond_wait *w) -{ - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&w->q, &w->wait); - w->next = *head; - *head = w; -} - -static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw) -{ - struct cond_wait *w, *prev; - remove_wait_queue(&cw->q, &cw->wait); - set_current_state(TASK_RUNNING); - for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) { - if (w == cw) { - if (prev != NULL) - prev->next = w->next; - else - *head = w->next; - break; - } - } -} - -static void flush_cond_wait(struct cond_wait **head) -{ - while (*head != NULL) { - wake_up_interruptible(&(*head)->q); - *head = (*head)->next; - } -} - -/* - * wait for general purpose I/O pin(s) to enter specified state - * - * user_gpio fields: - * state - bit indicates target pin state - * smask - set bit indicates watched pin - * - * The wait ends when at least one watched pin enters the specified - * state. When 0 (no error) is returned, user_gpio->state is set to the - * state of all GPIO pins when the wait ends. - * - * Note: Each pin may be a dedicated input, dedicated output, or - * configurable input/output. The number and configuration of pins - * varies with the specific adapter model. Only input pins (dedicated - * or configured) can be monitored with this function. - */ -static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) -{ - unsigned long flags; - int rc = 0; - struct gpio_desc gpio; - struct cond_wait wait; - u32 state; - - if (!info->gpio_present) - return -EINVAL; - if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) - return -EFAULT; - DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n", - info->device_name, gpio.state, gpio.smask)); - /* ignore output pins identified by set IODR bit */ - if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0) - return -EINVAL; - init_cond_wait(&wait, gpio.smask); - - spin_lock_irqsave(&info->port_array[0]->lock, flags); - /* enable interrupts for watched pins */ - wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask); - /* get current pin states */ - state = rd_reg32(info, IOVR); - - if (gpio.smask & ~(state ^ gpio.state)) { - /* already in target state */ - gpio.state = state; - } else { - /* wait for target state */ - add_cond_wait(&info->gpio_wait_q, &wait); - spin_unlock_irqrestore(&info->port_array[0]->lock, flags); - schedule(); - if (signal_pending(current)) - rc = -ERESTARTSYS; - else - gpio.state = wait.data; - spin_lock_irqsave(&info->port_array[0]->lock, flags); - remove_cond_wait(&info->gpio_wait_q, &wait); - } - - /* disable all GPIO interrupts if no waiting processes */ - if (info->gpio_wait_q == NULL) - wr_reg32(info, IOER, 0); - spin_unlock_irqrestore(&info->port_array[0]->lock, flags); - - if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio))) - rc = -EFAULT; - return rc; -} - -static int modem_input_wait(struct slgt_info *info,int arg) -{ - unsigned long flags; - int rc; - struct mgsl_icount cprev, cnow; - DECLARE_WAITQUEUE(wait, current); - - /* save current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cprev = info->icount; - add_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get new irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; - break; - } - - /* check for change in caller specified modem input */ - if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || - (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || - (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || - (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { - rc = 0; - break; - } - - cprev = cnow; - } - remove_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_RUNNING); - return rc; -} - -/* - * return state of serial control and status signals - */ -static int tiocmget(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + - ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) + - ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) + - ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) + - ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) + - ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0); - - DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result)); - return result; -} - -/* - * set modem control signals (DTR/RTS) - * - * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit - * TIOCMSET = set/clear signal values - * value bit mask for command - */ -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear)); - - if (set & TIOCM_RTS) - info->signals |= SerialSignal_RTS; - if (set & TIOCM_DTR) - info->signals |= SerialSignal_DTR; - if (clear & TIOCM_RTS) - info->signals &= ~SerialSignal_RTS; - if (clear & TIOCM_DTR) - info->signals &= ~SerialSignal_DTR; - - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int carrier_raised(struct tty_port *port) -{ - unsigned long flags; - struct slgt_info *info = container_of(port, struct slgt_info, port); - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - return (info->signals & SerialSignal_DCD) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - unsigned long flags; - struct slgt_info *info = container_of(port, struct slgt_info, port); - - spin_lock_irqsave(&info->lock,flags); - if (on) - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); -} - - -/* - * block current process until the device is ready to open - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct slgt_info *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - bool extra_count = false; - unsigned long flags; - int cd; - struct tty_port *port = &info->port; - - DBGINFO(("%s block_til_ready\n", tty->driver->name)); - - if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ - /* nonblock mode is set or port is not enabled */ - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) { - extra_count = true; - port->count--; - } - spin_unlock_irqrestore(&info->lock, flags); - port->blocked_open++; - - while (1) { - if ((tty->termios->c_cflag & CBAUD)) - tty_port_raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ - retval = (port->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - cd = tty_port_carrier_raised(port); - - if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd )) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); - tty_unlock(); - schedule(); - tty_lock(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - if (extra_count) - port->count++; - port->blocked_open--; - - if (!retval) - port->flags |= ASYNC_NORMAL_ACTIVE; - - DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); - return retval; -} - -static int alloc_tmp_rbuf(struct slgt_info *info) -{ - info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL); - if (info->tmp_rbuf == NULL) - return -ENOMEM; - return 0; -} - -static void free_tmp_rbuf(struct slgt_info *info) -{ - kfree(info->tmp_rbuf); - info->tmp_rbuf = NULL; -} - -/* - * allocate DMA descriptor lists. - */ -static int alloc_desc(struct slgt_info *info) -{ - unsigned int i; - unsigned int pbufs; - - /* allocate memory to hold descriptor lists */ - info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr); - if (info->bufs == NULL) - return -ENOMEM; - - memset(info->bufs, 0, DESC_LIST_SIZE); - - info->rbufs = (struct slgt_desc*)info->bufs; - info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count; - - pbufs = (unsigned int)info->bufs_dma_addr; - - /* - * Build circular lists of descriptors - */ - - for (i=0; i < info->rbuf_count; i++) { - /* physical address of this descriptor */ - info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc)); - - /* physical address of next descriptor */ - if (i == info->rbuf_count - 1) - info->rbufs[i].next = cpu_to_le32(pbufs); - else - info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc))); - set_desc_count(info->rbufs[i], DMABUFSIZE); - } - - for (i=0; i < info->tbuf_count; i++) { - /* physical address of this descriptor */ - info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc)); - - /* physical address of next descriptor */ - if (i == info->tbuf_count - 1) - info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc)); - else - info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc))); - } - - return 0; -} - -static void free_desc(struct slgt_info *info) -{ - if (info->bufs != NULL) { - pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr); - info->bufs = NULL; - info->rbufs = NULL; - info->tbufs = NULL; - } -} - -static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) -{ - int i; - for (i=0; i < count; i++) { - if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL) - return -ENOMEM; - bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr); - } - return 0; -} - -static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) -{ - int i; - for (i=0; i < count; i++) { - if (bufs[i].buf == NULL) - continue; - pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr); - bufs[i].buf = NULL; - } -} - -static int alloc_dma_bufs(struct slgt_info *info) -{ - info->rbuf_count = 32; - info->tbuf_count = 32; - - if (alloc_desc(info) < 0 || - alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 || - alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 || - alloc_tmp_rbuf(info) < 0) { - DBGERR(("%s DMA buffer alloc fail\n", info->device_name)); - return -ENOMEM; - } - reset_rbufs(info); - return 0; -} - -static void free_dma_bufs(struct slgt_info *info) -{ - if (info->bufs) { - free_bufs(info, info->rbufs, info->rbuf_count); - free_bufs(info, info->tbufs, info->tbuf_count); - free_desc(info); - } - free_tmp_rbuf(info); -} - -static int claim_resources(struct slgt_info *info) -{ - if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) { - DBGERR(("%s reg addr conflict, addr=%08X\n", - info->device_name, info->phys_reg_addr)); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->reg_addr_requested = true; - - info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE); - if (!info->reg_addr) { - DBGERR(("%s cant map device registers, addr=%08X\n", - info->device_name, info->phys_reg_addr)); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - return 0; - -errout: - release_resources(info); - return -ENODEV; -} - -static void release_resources(struct slgt_info *info) -{ - if (info->irq_requested) { - free_irq(info->irq_level, info); - info->irq_requested = false; - } - - if (info->reg_addr_requested) { - release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE); - info->reg_addr_requested = false; - } - - if (info->reg_addr) { - iounmap(info->reg_addr); - info->reg_addr = NULL; - } -} - -/* Add the specified device instance data structure to the - * global linked list of devices and increment the device count. - */ -static void add_device(struct slgt_info *info) -{ - char *devstr; - - info->next_device = NULL; - info->line = slgt_device_count; - sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line); - - if (info->line < MAX_DEVICES) { - if (maxframe[info->line]) - info->max_frame_size = maxframe[info->line]; - } - - slgt_device_count++; - - if (!slgt_device_list) - slgt_device_list = info; - else { - struct slgt_info *current_dev = slgt_device_list; - while(current_dev->next_device) - current_dev = current_dev->next_device; - current_dev->next_device = info; - } - - if (info->max_frame_size < 4096) - info->max_frame_size = 4096; - else if (info->max_frame_size > 65535) - info->max_frame_size = 65535; - - switch(info->pdev->device) { - case SYNCLINK_GT_DEVICE_ID: - devstr = "GT"; - break; - case SYNCLINK_GT2_DEVICE_ID: - devstr = "GT2"; - break; - case SYNCLINK_GT4_DEVICE_ID: - devstr = "GT4"; - break; - case SYNCLINK_AC_DEVICE_ID: - devstr = "AC"; - info->params.mode = MGSL_MODE_ASYNC; - break; - default: - devstr = "(unknown model)"; - } - printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n", - devstr, info->device_name, info->phys_reg_addr, - info->irq_level, info->max_frame_size); - -#if SYNCLINK_GENERIC_HDLC - hdlcdev_init(info); -#endif -} - -static const struct tty_port_operations slgt_port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - -/* - * allocate device instance structure, return NULL on failure - */ -static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) -{ - struct slgt_info *info; - - info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL); - - if (!info) { - DBGERR(("%s device alloc failed adapter=%d port=%d\n", - driver_name, adapter_num, port_num)); - } else { - tty_port_init(&info->port); - info->port.ops = &slgt_port_ops; - info->magic = MGSL_MAGIC; - INIT_WORK(&info->task, bh_handler); - info->max_frame_size = 4096; - info->base_clock = 14745600; - info->rbuf_fill_level = DMABUFSIZE; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->adapter_num = adapter_num; - info->port_num = port_num; - - setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info); - setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info); - - /* Copy configuration info to device instance data */ - info->pdev = pdev; - info->irq_level = pdev->irq; - info->phys_reg_addr = pci_resource_start(pdev,0); - - info->bus_type = MGSL_BUS_TYPE_PCI; - info->irq_flags = IRQF_SHARED; - - info->init_error = -1; /* assume error, set to 0 on successful init */ - } - - return info; -} - -static void device_init(int adapter_num, struct pci_dev *pdev) -{ - struct slgt_info *port_array[SLGT_MAX_PORTS]; - int i; - int port_count = 1; - - if (pdev->device == SYNCLINK_GT2_DEVICE_ID) - port_count = 2; - else if (pdev->device == SYNCLINK_GT4_DEVICE_ID) - port_count = 4; - - /* allocate device instances for all ports */ - for (i=0; i < port_count; ++i) { - port_array[i] = alloc_dev(adapter_num, i, pdev); - if (port_array[i] == NULL) { - for (--i; i >= 0; --i) - kfree(port_array[i]); - return; - } - } - - /* give copy of port_array to all ports and add to device list */ - for (i=0; i < port_count; ++i) { - memcpy(port_array[i]->port_array, port_array, sizeof(port_array)); - add_device(port_array[i]); - port_array[i]->port_count = port_count; - spin_lock_init(&port_array[i]->lock); - } - - /* Allocate and claim adapter resources */ - if (!claim_resources(port_array[0])) { - - alloc_dma_bufs(port_array[0]); - - /* copy resource information from first port to others */ - for (i = 1; i < port_count; ++i) { - port_array[i]->irq_level = port_array[0]->irq_level; - port_array[i]->reg_addr = port_array[0]->reg_addr; - alloc_dma_bufs(port_array[i]); - } - - if (request_irq(port_array[0]->irq_level, - slgt_interrupt, - port_array[0]->irq_flags, - port_array[0]->device_name, - port_array[0]) < 0) { - DBGERR(("%s request_irq failed IRQ=%d\n", - port_array[0]->device_name, - port_array[0]->irq_level)); - } else { - port_array[0]->irq_requested = true; - adapter_test(port_array[0]); - for (i=1 ; i < port_count ; i++) { - port_array[i]->init_error = port_array[0]->init_error; - port_array[i]->gpio_present = port_array[0]->gpio_present; - } - } - } - - for (i=0; i < port_count; ++i) - tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev)); -} - -static int __devinit init_one(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - if (pci_enable_device(dev)) { - printk("error enabling pci device %p\n", dev); - return -EIO; - } - pci_set_master(dev); - device_init(slgt_device_count, dev); - return 0; -} - -static void __devexit remove_one(struct pci_dev *dev) -{ -} - -static const struct tty_operations ops = { - .open = open, - .close = close, - .write = write, - .put_char = put_char, - .flush_chars = flush_chars, - .write_room = write_room, - .chars_in_buffer = chars_in_buffer, - .flush_buffer = flush_buffer, - .ioctl = ioctl, - .compat_ioctl = slgt_compat_ioctl, - .throttle = throttle, - .unthrottle = unthrottle, - .send_xchar = send_xchar, - .break_ctl = set_break, - .wait_until_sent = wait_until_sent, - .set_termios = set_termios, - .stop = tx_hold, - .start = tx_release, - .hangup = hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, - .get_icount = get_icount, - .proc_fops = &synclink_gt_proc_fops, -}; - -static void slgt_cleanup(void) -{ - int rc; - struct slgt_info *info; - struct slgt_info *tmp; - - printk(KERN_INFO "unload %s\n", driver_name); - - if (serial_driver) { - for (info=slgt_device_list ; info != NULL ; info=info->next_device) - tty_unregister_device(serial_driver, info->line); - if ((rc = tty_unregister_driver(serial_driver))) - DBGERR(("tty_unregister_driver error=%d\n", rc)); - put_tty_driver(serial_driver); - } - - /* reset devices */ - info = slgt_device_list; - while(info) { - reset_port(info); - info = info->next_device; - } - - /* release devices */ - info = slgt_device_list; - while(info) { -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - free_dma_bufs(info); - free_tmp_rbuf(info); - if (info->port_num == 0) - release_resources(info); - tmp = info; - info = info->next_device; - kfree(tmp); - } - - if (pci_registered) - pci_unregister_driver(&pci_driver); -} - -/* - * Driver initialization entry point. - */ -static int __init slgt_init(void) -{ - int rc; - - printk(KERN_INFO "%s\n", driver_name); - - serial_driver = alloc_tty_driver(MAX_DEVICES); - if (!serial_driver) { - printk("%s can't allocate tty driver\n", driver_name); - return -ENOMEM; - } - - /* Initialize the tty_driver structure */ - - serial_driver->owner = THIS_MODULE; - serial_driver->driver_name = tty_driver_name; - serial_driver->name = tty_dev_prefix; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->init_termios.c_ispeed = 9600; - serial_driver->init_termios.c_ospeed = 9600; - serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(serial_driver, &ops); - if ((rc = tty_register_driver(serial_driver)) < 0) { - DBGERR(("%s can't register serial driver\n", driver_name)); - put_tty_driver(serial_driver); - serial_driver = NULL; - goto error; - } - - printk(KERN_INFO "%s, tty major#%d\n", - driver_name, serial_driver->major); - - slgt_device_count = 0; - if ((rc = pci_register_driver(&pci_driver)) < 0) { - printk("%s pci_register_driver error=%d\n", driver_name, rc); - goto error; - } - pci_registered = true; - - if (!slgt_device_list) - printk("%s no devices found\n",driver_name); - - return 0; - -error: - slgt_cleanup(); - return rc; -} - -static void __exit slgt_exit(void) -{ - slgt_cleanup(); -} - -module_init(slgt_init); -module_exit(slgt_exit); - -/* - * register access routines - */ - -#define CALC_REGADDR() \ - unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \ - if (addr >= 0x80) \ - reg_addr += (info->port_num) * 32; \ - else if (addr >= 0x40) \ - reg_addr += (info->port_num) * 16; - -static __u8 rd_reg8(struct slgt_info *info, unsigned int addr) -{ - CALC_REGADDR(); - return readb((void __iomem *)reg_addr); -} - -static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value) -{ - CALC_REGADDR(); - writeb(value, (void __iomem *)reg_addr); -} - -static __u16 rd_reg16(struct slgt_info *info, unsigned int addr) -{ - CALC_REGADDR(); - return readw((void __iomem *)reg_addr); -} - -static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value) -{ - CALC_REGADDR(); - writew(value, (void __iomem *)reg_addr); -} - -static __u32 rd_reg32(struct slgt_info *info, unsigned int addr) -{ - CALC_REGADDR(); - return readl((void __iomem *)reg_addr); -} - -static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value) -{ - CALC_REGADDR(); - writel(value, (void __iomem *)reg_addr); -} - -static void rdma_reset(struct slgt_info *info) -{ - unsigned int i; - - /* set reset bit */ - wr_reg32(info, RDCSR, BIT1); - - /* wait for enable bit cleared */ - for(i=0 ; i < 1000 ; i++) - if (!(rd_reg32(info, RDCSR) & BIT0)) - break; -} - -static void tdma_reset(struct slgt_info *info) -{ - unsigned int i; - - /* set reset bit */ - wr_reg32(info, TDCSR, BIT1); - - /* wait for enable bit cleared */ - for(i=0 ; i < 1000 ; i++) - if (!(rd_reg32(info, TDCSR) & BIT0)) - break; -} - -/* - * enable internal loopback - * TxCLK and RxCLK are generated from BRG - * and TxD is looped back to RxD internally. - */ -static void enable_loopback(struct slgt_info *info) -{ - /* SCR (serial control) BIT2=looopback enable */ - wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* CCR (clock control) - * 07..05 tx clock source (010 = BRG) - * 04..02 rx clock source (010 = BRG) - * 01 auxclk enable (0 = disable) - * 00 BRG enable (1 = enable) - * - * 0100 1001 - */ - wr_reg8(info, CCR, 0x49); - - /* set speed if available, otherwise use default */ - if (info->params.clock_speed) - set_rate(info, info->params.clock_speed); - else - set_rate(info, 3686400); - } -} - -/* - * set baud rate generator to specified rate - */ -static void set_rate(struct slgt_info *info, u32 rate) -{ - unsigned int div; - unsigned int osc = info->base_clock; - - /* div = osc/rate - 1 - * - * Round div up if osc/rate is not integer to - * force to next slowest rate. - */ - - if (rate) { - div = osc/rate; - if (!(osc % rate) && div) - div--; - wr_reg16(info, BDR, (unsigned short)div); - } -} - -static void rx_stop(struct slgt_info *info) -{ - unsigned short val; - - /* disable and reset receiver */ - val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ - wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ - wr_reg16(info, RCR, val); /* clear reset bit */ - - slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE); - - /* clear pending rx interrupts */ - wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER); - - rdma_reset(info); - - info->rx_enabled = false; - info->rx_restart = false; -} - -static void rx_start(struct slgt_info *info) -{ - unsigned short val; - - slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA); - - /* clear pending rx overrun IRQ */ - wr_reg16(info, SSR, IRQ_RXOVER); - - /* reset and disable receiver */ - val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ - wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ - wr_reg16(info, RCR, val); /* clear reset bit */ - - rdma_reset(info); - reset_rbufs(info); - - if (info->rx_pio) { - /* rx request when rx FIFO not empty */ - wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); - slgt_irq_on(info, IRQ_RXDATA); - if (info->params.mode == MGSL_MODE_ASYNC) { - /* enable saving of rx status */ - wr_reg32(info, RDCSR, BIT6); - } - } else { - /* rx request when rx FIFO half full */ - wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); - /* set 1st descriptor address */ - wr_reg32(info, RDDAR, info->rbufs[0].pdesc); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* enable rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT2 + BIT0)); - } else { - /* enable saving of rx status, rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); - } - } - - slgt_irq_on(info, IRQ_RXOVER); - - /* enable receiver */ - wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1)); - - info->rx_restart = false; - info->rx_enabled = true; -} - -static void tx_start(struct slgt_info *info) -{ - if (!info->tx_enabled) { - wr_reg16(info, TCR, - (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2)); - info->tx_enabled = true; - } - - if (desc_count(info->tbufs[info->tbuf_start])) { - info->drop_rts_on_tx_done = false; - - if (info->params.mode != MGSL_MODE_ASYNC) { - if (info->params.flags & HDLC_FLAG_AUTO_RTS) { - get_signals(info); - if (!(info->signals & SerialSignal_RTS)) { - info->signals |= SerialSignal_RTS; - set_signals(info); - info->drop_rts_on_tx_done = true; - } - } - - slgt_irq_off(info, IRQ_TXDATA); - slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE); - /* clear tx idle and underrun status bits */ - wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); - } else { - slgt_irq_off(info, IRQ_TXDATA); - slgt_irq_on(info, IRQ_TXIDLE); - /* clear tx idle status bit */ - wr_reg16(info, SSR, IRQ_TXIDLE); - } - /* set 1st descriptor address and start DMA */ - wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); - wr_reg32(info, TDCSR, BIT2 + BIT0); - info->tx_active = true; - } -} - -static void tx_stop(struct slgt_info *info) -{ - unsigned short val; - - del_timer(&info->tx_timer); - - tdma_reset(info); - - /* reset and disable transmitter */ - val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */ - wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ - - slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); - - /* clear tx idle and underrun status bit */ - wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); - - reset_tbufs(info); - - info->tx_enabled = false; - info->tx_active = false; -} - -static void reset_port(struct slgt_info *info) -{ - if (!info->reg_addr) - return; - - tx_stop(info); - rx_stop(info); - - info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - set_signals(info); - - slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); -} - -static void reset_adapter(struct slgt_info *info) -{ - int i; - for (i=0; i < info->port_count; ++i) { - if (info->port_array[i]) - reset_port(info->port_array[i]); - } -} - -static void async_mode(struct slgt_info *info) -{ - unsigned short val; - - slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); - tx_stop(info); - rx_stop(info); - - /* TCR (tx control) - * - * 15..13 mode, 010=async - * 12..10 encoding, 000=NRZ - * 09 parity enable - * 08 1=odd parity, 0=even parity - * 07 1=RTS driver control - * 06 1=break enable - * 05..04 character length - * 00=5 bits - * 01=6 bits - * 10=7 bits - * 11=8 bits - * 03 0=1 stop bit, 1=2 stop bits - * 02 reset - * 01 enable - * 00 auto-CTS enable - */ - val = 0x4000; - - if (info->if_mode & MGSL_INTERFACE_RTS_EN) - val |= BIT7; - - if (info->params.parity != ASYNC_PARITY_NONE) { - val |= BIT9; - if (info->params.parity == ASYNC_PARITY_ODD) - val |= BIT8; - } - - switch (info->params.data_bits) - { - case 6: val |= BIT4; break; - case 7: val |= BIT5; break; - case 8: val |= BIT5 + BIT4; break; - } - - if (info->params.stop_bits != 1) - val |= BIT3; - - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - val |= BIT0; - - wr_reg16(info, TCR, val); - - /* RCR (rx control) - * - * 15..13 mode, 010=async - * 12..10 encoding, 000=NRZ - * 09 parity enable - * 08 1=odd parity, 0=even parity - * 07..06 reserved, must be 0 - * 05..04 character length - * 00=5 bits - * 01=6 bits - * 10=7 bits - * 11=8 bits - * 03 reserved, must be zero - * 02 reset - * 01 enable - * 00 auto-DCD enable - */ - val = 0x4000; - - if (info->params.parity != ASYNC_PARITY_NONE) { - val |= BIT9; - if (info->params.parity == ASYNC_PARITY_ODD) - val |= BIT8; - } - - switch (info->params.data_bits) - { - case 6: val |= BIT4; break; - case 7: val |= BIT5; break; - case 8: val |= BIT5 + BIT4; break; - } - - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - val |= BIT0; - - wr_reg16(info, RCR, val); - - /* CCR (clock control) - * - * 07..05 011 = tx clock source is BRG/16 - * 04..02 010 = rx clock source is BRG - * 01 0 = auxclk disabled - * 00 1 = BRG enabled - * - * 0110 1001 - */ - wr_reg8(info, CCR, 0x69); - - msc_set_vcr(info); - - /* SCR (serial control) - * - * 15 1=tx req on FIFO half empty - * 14 1=rx req on FIFO half full - * 13 tx data IRQ enable - * 12 tx idle IRQ enable - * 11 rx break on IRQ enable - * 10 rx data IRQ enable - * 09 rx break off IRQ enable - * 08 overrun IRQ enable - * 07 DSR IRQ enable - * 06 CTS IRQ enable - * 05 DCD IRQ enable - * 04 RI IRQ enable - * 03 0=16x sampling, 1=8x sampling - * 02 1=txd->rxd internal loopback enable - * 01 reserved, must be zero - * 00 1=master IRQ enable - */ - val = BIT15 + BIT14 + BIT0; - /* JCR[8] : 1 = x8 async mode feature available */ - if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate && - ((info->base_clock < (info->params.data_rate * 16)) || - (info->base_clock % (info->params.data_rate * 16)))) { - /* use 8x sampling */ - val |= BIT3; - set_rate(info, info->params.data_rate * 8); - } else { - /* use 16x sampling */ - set_rate(info, info->params.data_rate * 16); - } - wr_reg16(info, SCR, val); - - slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER); - - if (info->params.loopback) - enable_loopback(info); -} - -static void sync_mode(struct slgt_info *info) -{ - unsigned short val; - - slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); - tx_stop(info); - rx_stop(info); - - /* TCR (tx control) - * - * 15..13 mode - * 000=HDLC/SDLC - * 001=raw bit synchronous - * 010=asynchronous/isochronous - * 011=monosync byte synchronous - * 100=bisync byte synchronous - * 101=xsync byte synchronous - * 12..10 encoding - * 09 CRC enable - * 08 CRC32 - * 07 1=RTS driver control - * 06 preamble enable - * 05..04 preamble length - * 03 share open/close flag - * 02 reset - * 01 enable - * 00 auto-CTS enable - */ - val = BIT2; - - switch(info->params.mode) { - case MGSL_MODE_XSYNC: - val |= BIT15 + BIT13; - break; - case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; - case MGSL_MODE_BISYNC: val |= BIT15; break; - case MGSL_MODE_RAW: val |= BIT13; break; - } - if (info->if_mode & MGSL_INTERFACE_RTS_EN) - val |= BIT7; - - switch(info->params.encoding) - { - case HDLC_ENCODING_NRZB: val |= BIT10; break; - case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; - case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; - case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; - case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; - case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; - } - - switch (info->params.crc_type & HDLC_CRC_MASK) - { - case HDLC_CRC_16_CCITT: val |= BIT9; break; - case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; - } - - if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) - val |= BIT6; - - switch (info->params.preamble_length) - { - case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break; - case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break; - case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break; - } - - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - val |= BIT0; - - wr_reg16(info, TCR, val); - - /* TPR (transmit preamble) */ - - switch (info->params.preamble) - { - case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; - case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; - case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break; - case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break; - case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break; - default: val = 0x7e; break; - } - wr_reg8(info, TPR, (unsigned char)val); - - /* RCR (rx control) - * - * 15..13 mode - * 000=HDLC/SDLC - * 001=raw bit synchronous - * 010=asynchronous/isochronous - * 011=monosync byte synchronous - * 100=bisync byte synchronous - * 101=xsync byte synchronous - * 12..10 encoding - * 09 CRC enable - * 08 CRC32 - * 07..03 reserved, must be 0 - * 02 reset - * 01 enable - * 00 auto-DCD enable - */ - val = 0; - - switch(info->params.mode) { - case MGSL_MODE_XSYNC: - val |= BIT15 + BIT13; - break; - case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; - case MGSL_MODE_BISYNC: val |= BIT15; break; - case MGSL_MODE_RAW: val |= BIT13; break; - } - - switch(info->params.encoding) - { - case HDLC_ENCODING_NRZB: val |= BIT10; break; - case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; - case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; - case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; - case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; - case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; - } - - switch (info->params.crc_type & HDLC_CRC_MASK) - { - case HDLC_CRC_16_CCITT: val |= BIT9; break; - case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; - } - - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - val |= BIT0; - - wr_reg16(info, RCR, val); - - /* CCR (clock control) - * - * 07..05 tx clock source - * 04..02 rx clock source - * 01 auxclk enable - * 00 BRG enable - */ - val = 0; - - if (info->params.flags & HDLC_FLAG_TXC_BRG) - { - // when RxC source is DPLL, BRG generates 16X DPLL - // reference clock, so take TxC from BRG/16 to get - // transmit clock at actual data rate - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */ - else - val |= BIT6; /* 010, txclk = BRG */ - } - else if (info->params.flags & HDLC_FLAG_TXC_DPLL) - val |= BIT7; /* 100, txclk = DPLL Input */ - else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN) - val |= BIT5; /* 001, txclk = RXC Input */ - - if (info->params.flags & HDLC_FLAG_RXC_BRG) - val |= BIT3; /* 010, rxclk = BRG */ - else if (info->params.flags & HDLC_FLAG_RXC_DPLL) - val |= BIT4; /* 100, rxclk = DPLL */ - else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN) - val |= BIT2; /* 001, rxclk = TXC Input */ - - if (info->params.clock_speed) - val |= BIT1 + BIT0; - - wr_reg8(info, CCR, (unsigned char)val); - - if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL)) - { - // program DPLL mode - switch(info->params.encoding) - { - case HDLC_ENCODING_BIPHASE_MARK: - case HDLC_ENCODING_BIPHASE_SPACE: - val = BIT7; break; - case HDLC_ENCODING_BIPHASE_LEVEL: - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: - val = BIT7 + BIT6; break; - default: val = BIT6; // NRZ encodings - } - wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val)); - - // DPLL requires a 16X reference clock from BRG - set_rate(info, info->params.clock_speed * 16); - } - else - set_rate(info, info->params.clock_speed); - - tx_set_idle(info); - - msc_set_vcr(info); - - /* SCR (serial control) - * - * 15 1=tx req on FIFO half empty - * 14 1=rx req on FIFO half full - * 13 tx data IRQ enable - * 12 tx idle IRQ enable - * 11 underrun IRQ enable - * 10 rx data IRQ enable - * 09 rx idle IRQ enable - * 08 overrun IRQ enable - * 07 DSR IRQ enable - * 06 CTS IRQ enable - * 05 DCD IRQ enable - * 04 RI IRQ enable - * 03 reserved, must be zero - * 02 1=txd->rxd internal loopback enable - * 01 reserved, must be zero - * 00 1=master IRQ enable - */ - wr_reg16(info, SCR, BIT15 + BIT14 + BIT0); - - if (info->params.loopback) - enable_loopback(info); -} - -/* - * set transmit idle mode - */ -static void tx_set_idle(struct slgt_info *info) -{ - unsigned char val; - unsigned short tcr; - - /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits - * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits - */ - tcr = rd_reg16(info, TCR); - if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) { - /* disable preamble, set idle size to 16 bits */ - tcr = (tcr & ~(BIT6 + BIT5)) | BIT4; - /* MSB of 16 bit idle specified in tx preamble register (TPR) */ - wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff)); - } else if (!(tcr & BIT6)) { - /* preamble is disabled, set idle size to 8 bits */ - tcr &= ~(BIT5 + BIT4); - } - wr_reg16(info, TCR, tcr); - - if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) { - /* LSB of custom tx idle specified in tx idle register */ - val = (unsigned char)(info->idle_mode & 0xff); - } else { - /* standard 8 bit idle patterns */ - switch(info->idle_mode) - { - case HDLC_TXIDLE_FLAGS: val = 0x7e; break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: - case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break; - case HDLC_TXIDLE_ZEROS: - case HDLC_TXIDLE_SPACE: val = 0x00; break; - default: val = 0xff; - } - } - - wr_reg8(info, TIR, val); -} - -/* - * get state of V24 status (input) signals - */ -static void get_signals(struct slgt_info *info) -{ - unsigned short status = rd_reg16(info, SSR); - - /* clear all serial signals except DTR and RTS */ - info->signals &= SerialSignal_DTR + SerialSignal_RTS; - - if (status & BIT3) - info->signals |= SerialSignal_DSR; - if (status & BIT2) - info->signals |= SerialSignal_CTS; - if (status & BIT1) - info->signals |= SerialSignal_DCD; - if (status & BIT0) - info->signals |= SerialSignal_RI; -} - -/* - * set V.24 Control Register based on current configuration - */ -static void msc_set_vcr(struct slgt_info *info) -{ - unsigned char val = 0; - - /* VCR (V.24 control) - * - * 07..04 serial IF select - * 03 DTR - * 02 RTS - * 01 LL - * 00 RL - */ - - switch(info->if_mode & MGSL_INTERFACE_MASK) - { - case MGSL_INTERFACE_RS232: - val |= BIT5; /* 0010 */ - break; - case MGSL_INTERFACE_V35: - val |= BIT7 + BIT6 + BIT5; /* 1110 */ - break; - case MGSL_INTERFACE_RS422: - val |= BIT6; /* 0100 */ - break; - } - - if (info->if_mode & MGSL_INTERFACE_MSB_FIRST) - val |= BIT4; - if (info->signals & SerialSignal_DTR) - val |= BIT3; - if (info->signals & SerialSignal_RTS) - val |= BIT2; - if (info->if_mode & MGSL_INTERFACE_LL) - val |= BIT1; - if (info->if_mode & MGSL_INTERFACE_RL) - val |= BIT0; - wr_reg8(info, VCR, val); -} - -/* - * set state of V24 control (output) signals - */ -static void set_signals(struct slgt_info *info) -{ - unsigned char val = rd_reg8(info, VCR); - if (info->signals & SerialSignal_DTR) - val |= BIT3; - else - val &= ~BIT3; - if (info->signals & SerialSignal_RTS) - val |= BIT2; - else - val &= ~BIT2; - wr_reg8(info, VCR, val); -} - -/* - * free range of receive DMA buffers (i to last) - */ -static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last) -{ - int done = 0; - - while(!done) { - /* reset current buffer for reuse */ - info->rbufs[i].status = 0; - set_desc_count(info->rbufs[i], info->rbuf_fill_level); - if (i == last) - done = 1; - if (++i == info->rbuf_count) - i = 0; - } - info->rbuf_current = i; -} - -/* - * mark all receive DMA buffers as free - */ -static void reset_rbufs(struct slgt_info *info) -{ - free_rbufs(info, 0, info->rbuf_count - 1); - info->rbuf_fill_index = 0; - info->rbuf_fill_count = 0; -} - -/* - * pass receive HDLC frame to upper layer - * - * return true if frame available, otherwise false - */ -static bool rx_get_frame(struct slgt_info *info) -{ - unsigned int start, end; - unsigned short status; - unsigned int framesize = 0; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - unsigned char addr_field = 0xff; - unsigned int crc_size = 0; - - switch (info->params.crc_type & HDLC_CRC_MASK) { - case HDLC_CRC_16_CCITT: crc_size = 2; break; - case HDLC_CRC_32_CCITT: crc_size = 4; break; - } - -check_again: - - framesize = 0; - addr_field = 0xff; - start = end = info->rbuf_current; - - for (;;) { - if (!desc_complete(info->rbufs[end])) - goto cleanup; - - if (framesize == 0 && info->params.addr_filter != 0xff) - addr_field = info->rbufs[end].buf[0]; - - framesize += desc_count(info->rbufs[end]); - - if (desc_eof(info->rbufs[end])) - break; - - if (++end == info->rbuf_count) - end = 0; - - if (end == info->rbuf_current) { - if (info->rx_enabled){ - spin_lock_irqsave(&info->lock,flags); - rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - goto cleanup; - } - } - - /* status - * - * 15 buffer complete - * 14..06 reserved - * 05..04 residue - * 02 eof (end of frame) - * 01 CRC error - * 00 abort - */ - status = desc_status(info->rbufs[end]); - - /* ignore CRC bit if not using CRC (bit is undefined) */ - if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE) - status &= ~BIT1; - - if (framesize == 0 || - (addr_field != 0xff && addr_field != info->params.addr_filter)) { - free_rbufs(info, start, end); - goto check_again; - } - - if (framesize < (2 + crc_size) || status & BIT0) { - info->icount.rxshort++; - framesize = 0; - } else if (status & BIT1) { - info->icount.rxcrc++; - if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) - framesize = 0; - } - -#if SYNCLINK_GENERIC_HDLC - if (framesize == 0) { - info->netdev->stats.rx_errors++; - info->netdev->stats.rx_frame_errors++; - } -#endif - - DBGBH(("%s rx frame status=%04X size=%d\n", - info->device_name, status, framesize)); - DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx"); - - if (framesize) { - if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) { - framesize -= crc_size; - crc_size = 0; - } - - if (framesize > info->max_frame_size + crc_size) - info->icount.rxlong++; - else { - /* copy dma buffer(s) to contiguous temp buffer */ - int copy_count = framesize; - int i = start; - unsigned char *p = info->tmp_rbuf; - info->tmp_rbuf_count = framesize; - - info->icount.rxok++; - - while(copy_count) { - int partial_count = min_t(int, copy_count, info->rbuf_fill_level); - memcpy(p, info->rbufs[i].buf, partial_count); - p += partial_count; - copy_count -= partial_count; - if (++i == info->rbuf_count) - i = 0; - } - - if (info->params.crc_type & HDLC_CRC_RETURN_EX) { - *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK; - framesize++; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_rx(info,info->tmp_rbuf, framesize); - else -#endif - ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize); - } - } - free_rbufs(info, start, end); - return true; - -cleanup: - return false; -} - -/* - * pass receive buffer (RAW synchronous mode) to tty layer - * return true if buffer available, otherwise false - */ -static bool rx_get_buf(struct slgt_info *info) -{ - unsigned int i = info->rbuf_current; - unsigned int count; - - if (!desc_complete(info->rbufs[i])) - return false; - count = desc_count(info->rbufs[i]); - switch(info->params.mode) { - case MGSL_MODE_MONOSYNC: - case MGSL_MODE_BISYNC: - case MGSL_MODE_XSYNC: - /* ignore residue in byte synchronous modes */ - if (desc_residue(info->rbufs[i])) - count--; - break; - } - DBGDATA(info, info->rbufs[i].buf, count, "rx"); - DBGINFO(("rx_get_buf size=%d\n", count)); - if (count) - ldisc_receive_buf(info->port.tty, info->rbufs[i].buf, - info->flag_buf, count); - free_rbufs(info, i, i); - return true; -} - -static void reset_tbufs(struct slgt_info *info) -{ - unsigned int i; - info->tbuf_current = 0; - for (i=0 ; i < info->tbuf_count ; i++) { - info->tbufs[i].status = 0; - info->tbufs[i].count = 0; - } -} - -/* - * return number of free transmit DMA buffers - */ -static unsigned int free_tbuf_count(struct slgt_info *info) -{ - unsigned int count = 0; - unsigned int i = info->tbuf_current; - - do - { - if (desc_count(info->tbufs[i])) - break; /* buffer in use */ - ++count; - if (++i == info->tbuf_count) - i=0; - } while (i != info->tbuf_current); - - /* if tx DMA active, last zero count buffer is in use */ - if (count && (rd_reg32(info, TDCSR) & BIT0)) - --count; - - return count; -} - -/* - * return number of bytes in unsent transmit DMA buffers - * and the serial controller tx FIFO - */ -static unsigned int tbuf_bytes(struct slgt_info *info) -{ - unsigned int total_count = 0; - unsigned int i = info->tbuf_current; - unsigned int reg_value; - unsigned int count; - unsigned int active_buf_count = 0; - - /* - * Add descriptor counts for all tx DMA buffers. - * If count is zero (cleared by DMA controller after read), - * the buffer is complete or is actively being read from. - * - * Record buf_count of last buffer with zero count starting - * from current ring position. buf_count is mirror - * copy of count and is not cleared by serial controller. - * If DMA controller is active, that buffer is actively - * being read so add to total. - */ - do { - count = desc_count(info->tbufs[i]); - if (count) - total_count += count; - else if (!total_count) - active_buf_count = info->tbufs[i].buf_count; - if (++i == info->tbuf_count) - i = 0; - } while (i != info->tbuf_current); - - /* read tx DMA status register */ - reg_value = rd_reg32(info, TDCSR); - - /* if tx DMA active, last zero count buffer is in use */ - if (reg_value & BIT0) - total_count += active_buf_count; - - /* add tx FIFO count = reg_value[15..8] */ - total_count += (reg_value >> 8) & 0xff; - - /* if transmitter active add one byte for shift register */ - if (info->tx_active) - total_count++; - - return total_count; -} - -/* - * load data into transmit DMA buffer ring and start transmitter if needed - * return true if data accepted, otherwise false (buffers full) - */ -static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size) -{ - unsigned short count; - unsigned int i; - struct slgt_desc *d; - - /* check required buffer space */ - if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info)) - return false; - - DBGDATA(info, buf, size, "tx"); - - /* - * copy data to one or more DMA buffers in circular ring - * tbuf_start = first buffer for this data - * tbuf_current = next free buffer - * - * Copy all data before making data visible to DMA controller by - * setting descriptor count of the first buffer. - * This prevents an active DMA controller from reading the first DMA - * buffers of a frame and stopping before the final buffers are filled. - */ - - info->tbuf_start = i = info->tbuf_current; - - while (size) { - d = &info->tbufs[i]; - - count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size); - memcpy(d->buf, buf, count); - - size -= count; - buf += count; - - /* - * set EOF bit for last buffer of HDLC frame or - * for every buffer in raw mode - */ - if ((!size && info->params.mode == MGSL_MODE_HDLC) || - info->params.mode == MGSL_MODE_RAW) - set_desc_eof(*d, 1); - else - set_desc_eof(*d, 0); - - /* set descriptor count for all but first buffer */ - if (i != info->tbuf_start) - set_desc_count(*d, count); - d->buf_count = count; - - if (++i == info->tbuf_count) - i = 0; - } - - info->tbuf_current = i; - - /* set first buffer count to make new data visible to DMA controller */ - d = &info->tbufs[info->tbuf_start]; - set_desc_count(*d, d->buf_count); - - /* start transmitter if needed and update transmit timeout */ - if (!info->tx_active) - tx_start(info); - update_tx_timer(info); - - return true; -} - -static int register_test(struct slgt_info *info) -{ - static unsigned short patterns[] = - {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; - static unsigned int count = ARRAY_SIZE(patterns); - unsigned int i; - int rc = 0; - - for (i=0 ; i < count ; i++) { - wr_reg16(info, TIR, patterns[i]); - wr_reg16(info, BDR, patterns[(i+1)%count]); - if ((rd_reg16(info, TIR) != patterns[i]) || - (rd_reg16(info, BDR) != patterns[(i+1)%count])) { - rc = -ENODEV; - break; - } - } - info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0; - info->init_error = rc ? 0 : DiagStatus_AddressFailure; - return rc; -} - -static int irq_test(struct slgt_info *info) -{ - unsigned long timeout; - unsigned long flags; - struct tty_struct *oldtty = info->port.tty; - u32 speed = info->params.data_rate; - - info->params.data_rate = 921600; - info->port.tty = NULL; - - spin_lock_irqsave(&info->lock, flags); - async_mode(info); - slgt_irq_on(info, IRQ_TXIDLE); - - /* enable transmitter */ - wr_reg16(info, TCR, - (unsigned short)(rd_reg16(info, TCR) | BIT1)); - - /* write one byte and wait for tx idle */ - wr_reg16(info, TDR, 0); - - /* assume failure */ - info->init_error = DiagStatus_IrqFailure; - info->irq_occurred = false; - - spin_unlock_irqrestore(&info->lock, flags); - - timeout=100; - while(timeout-- && !info->irq_occurred) - msleep_interruptible(10); - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - spin_unlock_irqrestore(&info->lock,flags); - - info->params.data_rate = speed; - info->port.tty = oldtty; - - info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure; - return info->irq_occurred ? 0 : -ENODEV; -} - -static int loopback_test_rx(struct slgt_info *info) -{ - unsigned char *src, *dest; - int count; - - if (desc_complete(info->rbufs[0])) { - count = desc_count(info->rbufs[0]); - src = info->rbufs[0].buf; - dest = info->tmp_rbuf; - - for( ; count ; count-=2, src+=2) { - /* src=data byte (src+1)=status byte */ - if (!(*(src+1) & (BIT9 + BIT8))) { - *dest = *src; - dest++; - info->tmp_rbuf_count++; - } - } - DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx"); - return 1; - } - return 0; -} - -static int loopback_test(struct slgt_info *info) -{ -#define TESTFRAMESIZE 20 - - unsigned long timeout; - u16 count = TESTFRAMESIZE; - unsigned char buf[TESTFRAMESIZE]; - int rc = -ENODEV; - unsigned long flags; - - struct tty_struct *oldtty = info->port.tty; - MGSL_PARAMS params; - - memcpy(¶ms, &info->params, sizeof(params)); - - info->params.mode = MGSL_MODE_ASYNC; - info->params.data_rate = 921600; - info->params.loopback = 1; - info->port.tty = NULL; - - /* build and send transmit frame */ - for (count = 0; count < TESTFRAMESIZE; ++count) - buf[count] = (unsigned char)count; - - info->tmp_rbuf_count = 0; - memset(info->tmp_rbuf, 0, TESTFRAMESIZE); - - /* program hardware for HDLC and enabled receiver */ - spin_lock_irqsave(&info->lock,flags); - async_mode(info); - rx_start(info); - tx_load(info, buf, count); - spin_unlock_irqrestore(&info->lock, flags); - - /* wait for receive complete */ - for (timeout = 100; timeout; --timeout) { - msleep_interruptible(10); - if (loopback_test_rx(info)) { - rc = 0; - break; - } - } - - /* verify received frame length and contents */ - if (!rc && (info->tmp_rbuf_count != count || - memcmp(buf, info->tmp_rbuf, count))) { - rc = -ENODEV; - } - - spin_lock_irqsave(&info->lock,flags); - reset_adapter(info); - spin_unlock_irqrestore(&info->lock,flags); - - memcpy(&info->params, ¶ms, sizeof(info->params)); - info->port.tty = oldtty; - - info->init_error = rc ? DiagStatus_DmaFailure : 0; - return rc; -} - -static int adapter_test(struct slgt_info *info) -{ - DBGINFO(("testing %s\n", info->device_name)); - if (register_test(info) < 0) { - printk("register test failure %s addr=%08X\n", - info->device_name, info->phys_reg_addr); - } else if (irq_test(info) < 0) { - printk("IRQ test failure %s IRQ=%d\n", - info->device_name, info->irq_level); - } else if (loopback_test(info) < 0) { - printk("loopback test failure %s\n", info->device_name); - } - return info->init_error; -} - -/* - * transmit timeout handler - */ -static void tx_timeout(unsigned long context) -{ - struct slgt_info *info = (struct slgt_info*)context; - unsigned long flags; - - DBGINFO(("%s tx_timeout\n", info->device_name)); - if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { - info->icount.txtimeout++; - } - spin_lock_irqsave(&info->lock,flags); - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - bh_transmit(info); -} - -/* - * receive buffer polling timer - */ -static void rx_timeout(unsigned long context) -{ - struct slgt_info *info = (struct slgt_info*)context; - unsigned long flags; - - DBGINFO(("%s rx_timeout\n", info->device_name)); - spin_lock_irqsave(&info->lock, flags); - info->pending_bh |= BH_RECEIVE; - spin_unlock_irqrestore(&info->lock, flags); - bh_handler(&info->task); -} - diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c deleted file mode 100644 index 327343694473..000000000000 --- a/drivers/char/synclinkmp.c +++ /dev/null @@ -1,5600 +0,0 @@ -/* - * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $ - * - * Device driver for Microgate SyncLink Multiport - * high speed multiprotocol serial adapter. - * - * written by Paul Fulghum for Microgate Corporation - * paulkf@microgate.com - * - * Microgate and SyncLink are trademarks of Microgate Corporation - * - * Derived from serial.c written by Theodore Ts'o and Linus Torvalds - * This code is released under the GNU General Public License (GPL) - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) -#if defined(__i386__) -# define BREAKPOINT() asm(" int $3"); -#else -# define BREAKPOINT() { } -#endif - -#define MAX_DEVICES 12 - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE)) -#define SYNCLINK_GENERIC_HDLC 1 -#else -#define SYNCLINK_GENERIC_HDLC 0 -#endif - -#define GET_USER(error,value,addr) error = get_user(value,addr) -#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 -#define PUT_USER(error,value,addr) error = put_user(value,addr) -#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 - -#include - -static MGSL_PARAMS default_params = { - MGSL_MODE_HDLC, /* unsigned long mode */ - 0, /* unsigned char loopback; */ - HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ - HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ - 0, /* unsigned long clock_speed; */ - 0xff, /* unsigned char addr_filter; */ - HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ - HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ - HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ - 9600, /* unsigned long data_rate; */ - 8, /* unsigned char data_bits; */ - 1, /* unsigned char stop_bits; */ - ASYNC_PARITY_NONE /* unsigned char parity; */ -}; - -/* size in bytes of DMA data buffers */ -#define SCABUFSIZE 1024 -#define SCA_MEM_SIZE 0x40000 -#define SCA_BASE_SIZE 512 -#define SCA_REG_SIZE 16 -#define SCA_MAX_PORTS 4 -#define SCAMAXDESC 128 - -#define BUFFERLISTSIZE 4096 - -/* SCA-I style DMA buffer descriptor */ -typedef struct _SCADESC -{ - u16 next; /* lower l6 bits of next descriptor addr */ - u16 buf_ptr; /* lower 16 bits of buffer addr */ - u8 buf_base; /* upper 8 bits of buffer addr */ - u8 pad1; - u16 length; /* length of buffer */ - u8 status; /* status of buffer */ - u8 pad2; -} SCADESC, *PSCADESC; - -typedef struct _SCADESC_EX -{ - /* device driver bookkeeping section */ - char *virt_addr; /* virtual address of data buffer */ - u16 phys_entry; /* lower 16-bits of physical address of this descriptor */ -} SCADESC_EX, *PSCADESC_EX; - -/* The queue of BH actions to be performed */ - -#define BH_RECEIVE 1 -#define BH_TRANSMIT 2 -#define BH_STATUS 4 - -#define IO_PIN_SHUTDOWN_LIMIT 100 - -struct _input_signal_events { - int ri_up; - int ri_down; - int dsr_up; - int dsr_down; - int dcd_up; - int dcd_down; - int cts_up; - int cts_down; -}; - -/* - * Device instance data structure - */ -typedef struct _synclinkmp_info { - void *if_ptr; /* General purpose pointer (used by SPPP) */ - int magic; - struct tty_port port; - int line; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ - - struct mgsl_icount icount; - - int timeout; - int x_char; /* xon/xoff character */ - u16 read_status_mask1; /* break detection (SR1 indications) */ - u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */ - unsigned char ignore_status_mask1; /* break detection (SR1 indications) */ - unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */ - unsigned char *tx_buf; - int tx_put; - int tx_get; - int tx_count; - - wait_queue_head_t status_event_wait_q; - wait_queue_head_t event_wait_q; - struct timer_list tx_timer; /* HDLC transmit timeout timer */ - struct _synclinkmp_info *next_device; /* device list link */ - struct timer_list status_timer; /* input signal status check timer */ - - spinlock_t lock; /* spinlock for synchronizing with ISR */ - struct work_struct task; /* task structure for scheduling bh */ - - u32 max_frame_size; /* as set by device config */ - - u32 pending_bh; - - bool bh_running; /* Protection from multiple */ - int isr_overflow; - bool bh_requested; - - int dcd_chkcount; /* check counts to prevent */ - int cts_chkcount; /* too many IRQs if a signal */ - int dsr_chkcount; /* is floating */ - int ri_chkcount; - - char *buffer_list; /* virtual address of Rx & Tx buffer lists */ - unsigned long buffer_list_phys; - - unsigned int rx_buf_count; /* count of total allocated Rx buffers */ - SCADESC *rx_buf_list; /* list of receive buffer entries */ - SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */ - unsigned int current_rx_buf; - - unsigned int tx_buf_count; /* count of total allocated Tx buffers */ - SCADESC *tx_buf_list; /* list of transmit buffer entries */ - SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */ - unsigned int last_tx_buf; - - unsigned char *tmp_rx_buf; - unsigned int tmp_rx_buf_count; - - bool rx_enabled; - bool rx_overflow; - - bool tx_enabled; - bool tx_active; - u32 idle_mode; - - unsigned char ie0_value; - unsigned char ie1_value; - unsigned char ie2_value; - unsigned char ctrlreg_value; - unsigned char old_signals; - - char device_name[25]; /* device instance name */ - - int port_count; - int adapter_num; - int port_num; - - struct _synclinkmp_info *port_array[SCA_MAX_PORTS]; - - unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ - - unsigned int irq_level; /* interrupt level */ - unsigned long irq_flags; - bool irq_requested; /* true if IRQ requested */ - - MGSL_PARAMS params; /* communications parameters */ - - unsigned char serial_signals; /* current serial signal states */ - - bool irq_occurred; /* for diagnostics use */ - unsigned int init_error; /* Initialization startup error */ - - u32 last_mem_alloc; - unsigned char* memory_base; /* shared memory address (PCI only) */ - u32 phys_memory_base; - int shared_mem_requested; - - unsigned char* sca_base; /* HD64570 SCA Memory address */ - u32 phys_sca_base; - u32 sca_offset; - bool sca_base_requested; - - unsigned char* lcr_base; /* local config registers (PCI only) */ - u32 phys_lcr_base; - u32 lcr_offset; - int lcr_mem_requested; - - unsigned char* statctrl_base; /* status/control register memory */ - u32 phys_statctrl_base; - u32 statctrl_offset; - bool sca_statctrl_requested; - - u32 misc_ctrl_value; - char flag_buf[MAX_ASYNC_BUFFER_SIZE]; - char char_buf[MAX_ASYNC_BUFFER_SIZE]; - bool drop_rts_on_tx_done; - - struct _input_signal_events input_signal_events; - - /* SPPP/Cisco HDLC device parts */ - int netcount; - spinlock_t netlock; - -#if SYNCLINK_GENERIC_HDLC - struct net_device *netdev; -#endif - -} SLMP_INFO; - -#define MGSL_MAGIC 0x5401 - -/* - * define serial signal status change macros - */ -#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */ -#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */ -#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */ -#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */ - -/* Common Register macros */ -#define LPR 0x00 -#define PABR0 0x02 -#define PABR1 0x03 -#define WCRL 0x04 -#define WCRM 0x05 -#define WCRH 0x06 -#define DPCR 0x08 -#define DMER 0x09 -#define ISR0 0x10 -#define ISR1 0x11 -#define ISR2 0x12 -#define IER0 0x14 -#define IER1 0x15 -#define IER2 0x16 -#define ITCR 0x18 -#define INTVR 0x1a -#define IMVR 0x1c - -/* MSCI Register macros */ -#define TRB 0x20 -#define TRBL 0x20 -#define TRBH 0x21 -#define SR0 0x22 -#define SR1 0x23 -#define SR2 0x24 -#define SR3 0x25 -#define FST 0x26 -#define IE0 0x28 -#define IE1 0x29 -#define IE2 0x2a -#define FIE 0x2b -#define CMD 0x2c -#define MD0 0x2e -#define MD1 0x2f -#define MD2 0x30 -#define CTL 0x31 -#define SA0 0x32 -#define SA1 0x33 -#define IDL 0x34 -#define TMC 0x35 -#define RXS 0x36 -#define TXS 0x37 -#define TRC0 0x38 -#define TRC1 0x39 -#define RRC 0x3a -#define CST0 0x3c -#define CST1 0x3d - -/* Timer Register Macros */ -#define TCNT 0x60 -#define TCNTL 0x60 -#define TCNTH 0x61 -#define TCONR 0x62 -#define TCONRL 0x62 -#define TCONRH 0x63 -#define TMCS 0x64 -#define TEPR 0x65 - -/* DMA Controller Register macros */ -#define DARL 0x80 -#define DARH 0x81 -#define DARB 0x82 -#define BAR 0x80 -#define BARL 0x80 -#define BARH 0x81 -#define BARB 0x82 -#define SAR 0x84 -#define SARL 0x84 -#define SARH 0x85 -#define SARB 0x86 -#define CPB 0x86 -#define CDA 0x88 -#define CDAL 0x88 -#define CDAH 0x89 -#define EDA 0x8a -#define EDAL 0x8a -#define EDAH 0x8b -#define BFL 0x8c -#define BFLL 0x8c -#define BFLH 0x8d -#define BCR 0x8e -#define BCRL 0x8e -#define BCRH 0x8f -#define DSR 0x90 -#define DMR 0x91 -#define FCT 0x93 -#define DIR 0x94 -#define DCMD 0x95 - -/* combine with timer or DMA register address */ -#define TIMER0 0x00 -#define TIMER1 0x08 -#define TIMER2 0x10 -#define TIMER3 0x18 -#define RXDMA 0x00 -#define TXDMA 0x20 - -/* SCA Command Codes */ -#define NOOP 0x00 -#define TXRESET 0x01 -#define TXENABLE 0x02 -#define TXDISABLE 0x03 -#define TXCRCINIT 0x04 -#define TXCRCEXCL 0x05 -#define TXEOM 0x06 -#define TXABORT 0x07 -#define MPON 0x08 -#define TXBUFCLR 0x09 -#define RXRESET 0x11 -#define RXENABLE 0x12 -#define RXDISABLE 0x13 -#define RXCRCINIT 0x14 -#define RXREJECT 0x15 -#define SEARCHMP 0x16 -#define RXCRCEXCL 0x17 -#define RXCRCCALC 0x18 -#define CHRESET 0x21 -#define HUNT 0x31 - -/* DMA command codes */ -#define SWABORT 0x01 -#define FEICLEAR 0x02 - -/* IE0 */ -#define TXINTE BIT7 -#define RXINTE BIT6 -#define TXRDYE BIT1 -#define RXRDYE BIT0 - -/* IE1 & SR1 */ -#define UDRN BIT7 -#define IDLE BIT6 -#define SYNCD BIT4 -#define FLGD BIT4 -#define CCTS BIT3 -#define CDCD BIT2 -#define BRKD BIT1 -#define ABTD BIT1 -#define GAPD BIT1 -#define BRKE BIT0 -#define IDLD BIT0 - -/* IE2 & SR2 */ -#define EOM BIT7 -#define PMP BIT6 -#define SHRT BIT6 -#define PE BIT5 -#define ABT BIT5 -#define FRME BIT4 -#define RBIT BIT4 -#define OVRN BIT3 -#define CRCE BIT2 - - -/* - * Global linked list of SyncLink devices - */ -static SLMP_INFO *synclinkmp_device_list = NULL; -static int synclinkmp_adapter_count = -1; -static int synclinkmp_device_count = 0; - -/* - * Set this param to non-zero to load eax with the - * .text section address and breakpoint on module load. - * This is useful for use with gdb and add-symbol-file command. - */ -static int break_on_load = 0; - -/* - * Driver major number, defaults to zero to get auto - * assigned major number. May be forced as module parameter. - */ -static int ttymajor = 0; - -/* - * Array of user specified options for ISA adapters. - */ -static int debug_level = 0; -static int maxframe[MAX_DEVICES] = {0,}; - -module_param(break_on_load, bool, 0); -module_param(ttymajor, int, 0); -module_param(debug_level, int, 0); -module_param_array(maxframe, int, NULL, 0); - -static char *driver_name = "SyncLink MultiPort driver"; -static char *driver_version = "$Revision: 4.38 $"; - -static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent); -static void synclinkmp_remove_one(struct pci_dev *dev); - -static struct pci_device_id synclinkmp_pci_tbl[] = { - { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, }, - { 0, }, /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl); - -MODULE_LICENSE("GPL"); - -static struct pci_driver synclinkmp_pci_driver = { - .name = "synclinkmp", - .id_table = synclinkmp_pci_tbl, - .probe = synclinkmp_init_one, - .remove = __devexit_p(synclinkmp_remove_one), -}; - - -static struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - - -/* tty callbacks */ - -static int open(struct tty_struct *tty, struct file * filp); -static void close(struct tty_struct *tty, struct file * filp); -static void hangup(struct tty_struct *tty); -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); - -static int write(struct tty_struct *tty, const unsigned char *buf, int count); -static int put_char(struct tty_struct *tty, unsigned char ch); -static void send_xchar(struct tty_struct *tty, char ch); -static void wait_until_sent(struct tty_struct *tty, int timeout); -static int write_room(struct tty_struct *tty); -static void flush_chars(struct tty_struct *tty); -static void flush_buffer(struct tty_struct *tty); -static void tx_hold(struct tty_struct *tty); -static void tx_release(struct tty_struct *tty); - -static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int chars_in_buffer(struct tty_struct *tty); -static void throttle(struct tty_struct * tty); -static void unthrottle(struct tty_struct * tty); -static int set_break(struct tty_struct *tty, int break_state); - -#if SYNCLINK_GENERIC_HDLC -#define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(SLMP_INFO *info); -static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size); -static int hdlcdev_init(SLMP_INFO *info); -static void hdlcdev_exit(SLMP_INFO *info); -#endif - -/* ioctl handlers */ - -static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount); -static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params); -static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params); -static int get_txidle(SLMP_INFO *info, int __user *idle_mode); -static int set_txidle(SLMP_INFO *info, int idle_mode); -static int tx_enable(SLMP_INFO *info, int enable); -static int tx_abort(SLMP_INFO *info); -static int rx_enable(SLMP_INFO *info, int enable); -static int modem_input_wait(SLMP_INFO *info,int arg); -static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int set_break(struct tty_struct *tty, int break_state); - -static void add_device(SLMP_INFO *info); -static void device_init(int adapter_num, struct pci_dev *pdev); -static int claim_resources(SLMP_INFO *info); -static void release_resources(SLMP_INFO *info); - -static int startup(SLMP_INFO *info); -static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); -static int carrier_raised(struct tty_port *port); -static void shutdown(SLMP_INFO *info); -static void program_hw(SLMP_INFO *info); -static void change_params(SLMP_INFO *info); - -static bool init_adapter(SLMP_INFO *info); -static bool register_test(SLMP_INFO *info); -static bool irq_test(SLMP_INFO *info); -static bool loopback_test(SLMP_INFO *info); -static int adapter_test(SLMP_INFO *info); -static bool memory_test(SLMP_INFO *info); - -static void reset_adapter(SLMP_INFO *info); -static void reset_port(SLMP_INFO *info); -static void async_mode(SLMP_INFO *info); -static void hdlc_mode(SLMP_INFO *info); - -static void rx_stop(SLMP_INFO *info); -static void rx_start(SLMP_INFO *info); -static void rx_reset_buffers(SLMP_INFO *info); -static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last); -static bool rx_get_frame(SLMP_INFO *info); - -static void tx_start(SLMP_INFO *info); -static void tx_stop(SLMP_INFO *info); -static void tx_load_fifo(SLMP_INFO *info); -static void tx_set_idle(SLMP_INFO *info); -static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count); - -static void get_signals(SLMP_INFO *info); -static void set_signals(SLMP_INFO *info); -static void enable_loopback(SLMP_INFO *info, int enable); -static void set_rate(SLMP_INFO *info, u32 data_rate); - -static int bh_action(SLMP_INFO *info); -static void bh_handler(struct work_struct *work); -static void bh_receive(SLMP_INFO *info); -static void bh_transmit(SLMP_INFO *info); -static void bh_status(SLMP_INFO *info); -static void isr_timer(SLMP_INFO *info); -static void isr_rxint(SLMP_INFO *info); -static void isr_rxrdy(SLMP_INFO *info); -static void isr_txint(SLMP_INFO *info); -static void isr_txrdy(SLMP_INFO *info); -static void isr_rxdmaok(SLMP_INFO *info); -static void isr_rxdmaerror(SLMP_INFO *info); -static void isr_txdmaok(SLMP_INFO *info); -static void isr_txdmaerror(SLMP_INFO *info); -static void isr_io_pin(SLMP_INFO *info, u16 status); - -static int alloc_dma_bufs(SLMP_INFO *info); -static void free_dma_bufs(SLMP_INFO *info); -static int alloc_buf_list(SLMP_INFO *info); -static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count); -static int alloc_tmp_rx_buf(SLMP_INFO *info); -static void free_tmp_rx_buf(SLMP_INFO *info); - -static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count); -static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit); -static void tx_timeout(unsigned long context); -static void status_timeout(unsigned long context); - -static unsigned char read_reg(SLMP_INFO *info, unsigned char addr); -static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val); -static u16 read_reg16(SLMP_INFO *info, unsigned char addr); -static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val); -static unsigned char read_status_reg(SLMP_INFO * info); -static void write_control_reg(SLMP_INFO * info); - - -static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes -static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes -static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes - -static u32 misc_ctrl_value = 0x007e4040; -static u32 lcr1_brdr_value = 0x00800028; - -static u32 read_ahead_count = 8; - -/* DPCR, DMA Priority Control - * - * 07..05 Not used, must be 0 - * 04 BRC, bus release condition: 0=all transfers complete - * 1=release after 1 xfer on all channels - * 03 CCC, channel change condition: 0=every cycle - * 1=after each channel completes all xfers - * 02..00 PR<2..0>, priority 100=round robin - * - * 00000100 = 0x00 - */ -static unsigned char dma_priority = 0x04; - -// Number of bytes that can be written to shared RAM -// in a single write operation -static u32 sca_pci_load_interval = 64; - -/* - * 1st function defined in .text section. Calling this function in - * init_module() followed by a breakpoint allows a remote debugger - * (gdb) to get the .text address for the add-symbol-file command. - * This allows remote debugging of dynamically loadable modules. - */ -static void* synclinkmp_get_text_ptr(void); -static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;} - -static inline int sanity_check(SLMP_INFO *info, - char *name, const char *routine) -{ -#ifdef SANITY_CHECK - static const char *badmagic = - "Warning: bad magic number for synclinkmp_struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null synclinkmp_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != MGSL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#else - if (!info) - return 1; -#endif - return 0; -} - -/** - * line discipline callback wrappers - * - * The wrappers maintain line discipline references - * while calling into the line discipline. - * - * ldisc_receive_buf - pass receive data to line discipline - */ - -static void ldisc_receive_buf(struct tty_struct *tty, - const __u8 *data, char *flags, int count) -{ - struct tty_ldisc *ld; - if (!tty) - return; - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->receive_buf) - ld->ops->receive_buf(tty, data, flags, count); - tty_ldisc_deref(ld); - } -} - -/* tty callbacks */ - -/* Called when a port is opened. Init and enable port. - */ -static int open(struct tty_struct *tty, struct file *filp) -{ - SLMP_INFO *info; - int retval, line; - unsigned long flags; - - line = tty->index; - if ((line < 0) || (line >= synclinkmp_device_count)) { - printk("%s(%d): open with invalid line #%d.\n", - __FILE__,__LINE__,line); - return -ENODEV; - } - - info = synclinkmp_device_list; - while(info && info->line != line) - info = info->next_device; - if (sanity_check(info, tty->name, "open")) - return -ENODEV; - if ( info->init_error ) { - printk("%s(%d):%s device is not allocated, init error=%d\n", - __FILE__,__LINE__,info->device_name,info->init_error); - return -ENODEV; - } - - tty->driver_data = info; - info->port.tty = tty; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s open(), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, info->port.count); - - /* If port is closing, signal caller to try again */ - if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){ - if (info->port.flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->port.close_wait); - retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - goto cleanup; - } - - info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - spin_lock_irqsave(&info->netlock, flags); - if (info->netcount) { - retval = -EBUSY; - spin_unlock_irqrestore(&info->netlock, flags); - goto cleanup; - } - info->port.count++; - spin_unlock_irqrestore(&info->netlock, flags); - - if (info->port.count == 1) { - /* 1st open on this device, init hardware */ - retval = startup(info); - if (retval < 0) - goto cleanup; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() returned %d\n", - __FILE__,__LINE__, info->device_name, retval); - goto cleanup; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s open() success\n", - __FILE__,__LINE__, info->device_name); - retval = 0; - -cleanup: - if (retval) { - if (tty->count == 1) - info->port.tty = NULL; /* tty layer will release tty struct */ - if(info->port.count) - info->port.count--; - } - - return retval; -} - -/* Called when port is closed. Wait for remaining data to be - * sent. Disable port and free resources. - */ -static void close(struct tty_struct *tty, struct file *filp) -{ - SLMP_INFO * info = tty->driver_data; - - if (sanity_check(info, tty->name, "close")) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() entry, count=%d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - - if (tty_port_close_start(&info->port, tty, filp) == 0) - goto cleanup; - - mutex_lock(&info->port.mutex); - if (info->port.flags & ASYNC_INITIALIZED) - wait_until_sent(tty, info->timeout); - - flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - mutex_unlock(&info->port.mutex); - - tty_port_close_end(&info->port, tty); - info->port.tty = NULL; -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, - tty->driver->name, info->port.count); -} - -/* Called by tty_hangup() when a hangup is signaled. - * This is the same as closing all open descriptors for the port. - */ -static void hangup(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s hangup()\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "hangup")) - return; - - mutex_lock(&info->port.mutex); - flush_buffer(tty); - shutdown(info); - - spin_lock_irqsave(&info->port.lock, flags); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - spin_unlock_irqrestore(&info->port.lock, flags); - mutex_unlock(&info->port.mutex); - - wake_up_interruptible(&info->port.open_wait); -} - -/* Set new termios settings - */ -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__, - tty->driver->name ); - - change_params(info); - - /* Handle transition to B0 status */ - if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { - info->serial_signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) { - info->serial_signals |= SerialSignal_RTS; - } - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle turning off CRTSCTS */ - if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - tx_release(tty); - } -} - -/* Send a block of data - * - * Arguments: - * - * tty pointer to tty information structure - * buf pointer to buffer containing send data - * count size of send data in bytes - * - * Return Value: number of characters written - */ -static int write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s write() count=%d\n", - __FILE__,__LINE__,info->device_name,count); - - if (sanity_check(info, tty->name, "write")) - goto cleanup; - - if (!info->tx_buf) - goto cleanup; - - if (info->params.mode == MGSL_MODE_HDLC) { - if (count > info->max_frame_size) { - ret = -EIO; - goto cleanup; - } - if (info->tx_active) - goto cleanup; - if (info->tx_count) { - /* send accumulated data from send_char() calls */ - /* as frame and wait before accepting more data. */ - tx_load_dma_buffer(info, info->tx_buf, info->tx_count); - goto start; - } - ret = info->tx_count = count; - tx_load_dma_buffer(info, buf, count); - goto start; - } - - for (;;) { - c = min_t(int, count, - min(info->max_frame_size - info->tx_count - 1, - info->max_frame_size - info->tx_put)); - if (c <= 0) - break; - - memcpy(info->tx_buf + info->tx_put, buf, c); - - spin_lock_irqsave(&info->lock,flags); - info->tx_put += c; - if (info->tx_put >= info->max_frame_size) - info->tx_put -= info->max_frame_size; - info->tx_count += c; - spin_unlock_irqrestore(&info->lock,flags); - - buf += c; - count -= c; - ret += c; - } - - if (info->params.mode == MGSL_MODE_HDLC) { - if (count) { - ret = info->tx_count = 0; - goto cleanup; - } - tx_load_dma_buffer(info, info->tx_buf, info->tx_count); - } -start: - if (info->tx_count && !tty->stopped && !tty->hw_stopped) { - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk( "%s(%d):%s write() returning=%d\n", - __FILE__,__LINE__,info->device_name,ret); - return ret; -} - -/* Add a character to the transmit buffer. - */ -static int put_char(struct tty_struct *tty, unsigned char ch) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if ( debug_level >= DEBUG_LEVEL_INFO ) { - printk( "%s(%d):%s put_char(%d)\n", - __FILE__,__LINE__,info->device_name,ch); - } - - if (sanity_check(info, tty->name, "put_char")) - return 0; - - if (!info->tx_buf) - return 0; - - spin_lock_irqsave(&info->lock,flags); - - if ( (info->params.mode != MGSL_MODE_HDLC) || - !info->tx_active ) { - - if (info->tx_count < info->max_frame_size - 1) { - info->tx_buf[info->tx_put++] = ch; - if (info->tx_put >= info->max_frame_size) - info->tx_put -= info->max_frame_size; - info->tx_count++; - ret = 1; - } - } - - spin_unlock_irqrestore(&info->lock,flags); - return ret; -} - -/* Send a high-priority XON/XOFF character - */ -static void send_xchar(struct tty_struct *tty, char ch) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s send_xchar(%d)\n", - __FILE__,__LINE__, info->device_name, ch ); - - if (sanity_check(info, tty->name, "send_xchar")) - return; - - info->x_char = ch; - if (ch) { - /* Make sure transmit interrupts are on */ - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_enabled) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* Wait until the transmitter is empty. - */ -static void wait_until_sent(struct tty_struct *tty, int timeout) -{ - SLMP_INFO * info = tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (!info ) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_until_sent() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "wait_until_sent")) - return; - - if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags)) - goto exit; - - orig_jiffies = jiffies; - - /* Set check interval to 1/5 of estimated time to - * send a character, and make it at least 1. The check - * interval should also be less than the timeout. - * Note: use tight timings here to satisfy the NIST-PCTS. - */ - - if ( info->params.data_rate ) { - char_time = info->timeout/(32 * 5); - if (!char_time) - char_time++; - } else - char_time = 1; - - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - - if ( info->params.mode == MGSL_MODE_HDLC ) { - while (info->tx_active) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } else { - /* - * TODO: determine if there is something similar to USC16C32 - * TXSTATUS_ALL_SENT status - */ - while ( info->tx_active && info->tx_enabled) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } - -exit: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_until_sent() exit\n", - __FILE__,__LINE__, info->device_name ); -} - -/* Return the count of free bytes in transmit buffer - */ -static int write_room(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - int ret; - - if (sanity_check(info, tty->name, "write_room")) - return 0; - - if (info->params.mode == MGSL_MODE_HDLC) { - ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; - } else { - ret = info->max_frame_size - info->tx_count - 1; - if (ret < 0) - ret = 0; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s write_room()=%d\n", - __FILE__, __LINE__, info->device_name, ret); - - return ret; -} - -/* enable transmitter and send remaining buffered characters - */ -static void flush_chars(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s flush_chars() entry tx_count=%d\n", - __FILE__,__LINE__,info->device_name,info->tx_count); - - if (sanity_check(info, tty->name, "flush_chars")) - return; - - if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped || - !info->tx_buf) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s flush_chars() entry, starting transmitter\n", - __FILE__,__LINE__,info->device_name ); - - spin_lock_irqsave(&info->lock,flags); - - if (!info->tx_active) { - if ( (info->params.mode == MGSL_MODE_HDLC) && - info->tx_count ) { - /* operating in synchronous (frame oriented) mode */ - /* copy data from circular tx_buf to */ - /* transmit DMA buffer. */ - tx_load_dma_buffer(info, - info->tx_buf,info->tx_count); - } - tx_start(info); - } - - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Discard all data in the send buffer - */ -static void flush_buffer(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s flush_buffer() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "flush_buffer")) - return; - - spin_lock_irqsave(&info->lock,flags); - info->tx_count = info->tx_put = info->tx_get = 0; - del_timer(&info->tx_timer); - spin_unlock_irqrestore(&info->lock,flags); - - tty_wakeup(tty); -} - -/* throttle (stop) transmitter - */ -static void tx_hold(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_hold")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_hold()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if (info->tx_enabled) - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* release (start) transmitter - */ -static void tx_release(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_release")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_release()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_enabled) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Service an IOCTL request - * - * Arguments: - * - * tty pointer to tty instance data - * cmd IOCTL command code - * arg command argument/context - * - * Return Value: 0 if success, otherwise error code - */ -static int ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - SLMP_INFO *info = tty->driver_data; - void __user *argp = (void __user *)arg; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__, - info->device_name, cmd ); - - if (sanity_check(info, tty->name, "ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case MGSL_IOCGPARAMS: - return get_params(info, argp); - case MGSL_IOCSPARAMS: - return set_params(info, argp); - case MGSL_IOCGTXIDLE: - return get_txidle(info, argp); - case MGSL_IOCSTXIDLE: - return set_txidle(info, (int)arg); - case MGSL_IOCTXENABLE: - return tx_enable(info, (int)arg); - case MGSL_IOCRXENABLE: - return rx_enable(info, (int)arg); - case MGSL_IOCTXABORT: - return tx_abort(info); - case MGSL_IOCGSTATS: - return get_stats(info, argp); - case MGSL_IOCWAITEVENT: - return wait_mgsl_event(info, argp); - case MGSL_IOCLOOPTXDONE: - return 0; // TODO: Not supported, need to document - /* Wait for modem input (DCD,RI,DSR,CTS) change - * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) - */ - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static int get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - SLMP_INFO *info = tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -/* - * /proc fs routines.... - */ - -static inline void line_info(struct seq_file *m, SLMP_INFO *info) -{ - char stat_buf[30]; - unsigned long flags; - - seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n" - "\tIRQ=%d MaxFrameSize=%u\n", - info->device_name, - info->phys_sca_base, - info->phys_memory_base, - info->phys_statctrl_base, - info->phys_lcr_base, - info->irq_level, - info->max_frame_size ); - - /* output current serial signal states */ - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (info->serial_signals & SerialSignal_RTS) - strcat(stat_buf, "|RTS"); - if (info->serial_signals & SerialSignal_CTS) - strcat(stat_buf, "|CTS"); - if (info->serial_signals & SerialSignal_DTR) - strcat(stat_buf, "|DTR"); - if (info->serial_signals & SerialSignal_DSR) - strcat(stat_buf, "|DSR"); - if (info->serial_signals & SerialSignal_DCD) - strcat(stat_buf, "|CD"); - if (info->serial_signals & SerialSignal_RI) - strcat(stat_buf, "|RI"); - - if (info->params.mode == MGSL_MODE_HDLC) { - seq_printf(m, "\tHDLC txok:%d rxok:%d", - info->icount.txok, info->icount.rxok); - if (info->icount.txunder) - seq_printf(m, " txunder:%d", info->icount.txunder); - if (info->icount.txabort) - seq_printf(m, " txabort:%d", info->icount.txabort); - if (info->icount.rxshort) - seq_printf(m, " rxshort:%d", info->icount.rxshort); - if (info->icount.rxlong) - seq_printf(m, " rxlong:%d", info->icount.rxlong); - if (info->icount.rxover) - seq_printf(m, " rxover:%d", info->icount.rxover); - if (info->icount.rxcrc) - seq_printf(m, " rxlong:%d", info->icount.rxcrc); - } else { - seq_printf(m, "\tASYNC tx:%d rx:%d", - info->icount.tx, info->icount.rx); - if (info->icount.frame) - seq_printf(m, " fe:%d", info->icount.frame); - if (info->icount.parity) - seq_printf(m, " pe:%d", info->icount.parity); - if (info->icount.brk) - seq_printf(m, " brk:%d", info->icount.brk); - if (info->icount.overrun) - seq_printf(m, " oe:%d", info->icount.overrun); - } - - /* Append serial signal status to end */ - seq_printf(m, " %s\n", stat_buf+1); - - seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", - info->tx_active,info->bh_requested,info->bh_running, - info->pending_bh); -} - -/* Called to print information about devices - */ -static int synclinkmp_proc_show(struct seq_file *m, void *v) -{ - SLMP_INFO *info; - - seq_printf(m, "synclinkmp driver:%s\n", driver_version); - - info = synclinkmp_device_list; - while( info ) { - line_info(m, info); - info = info->next_device; - } - return 0; -} - -static int synclinkmp_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, synclinkmp_proc_show, NULL); -} - -static const struct file_operations synclinkmp_proc_fops = { - .owner = THIS_MODULE, - .open = synclinkmp_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* Return the count of bytes in transmit buffer - */ -static int chars_in_buffer(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - - if (sanity_check(info, tty->name, "chars_in_buffer")) - return 0; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s chars_in_buffer()=%d\n", - __FILE__, __LINE__, info->device_name, info->tx_count); - - return info->tx_count; -} - -/* Signal remote device to throttle send data (our receive data) - */ -static void throttle(struct tty_struct * tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s throttle() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "throttle")) - return; - - if (I_IXOFF(tty)) - send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* Signal remote device to stop throttling send data (our receive data) - */ -static void unthrottle(struct tty_struct * tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s unthrottle() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - send_xchar(tty, START_CHAR(tty)); - } - - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* set or clear transmit break condition - * break_state -1=set break condition, 0=clear - */ -static int set_break(struct tty_struct *tty, int break_state) -{ - unsigned char RegValue; - SLMP_INFO * info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_break(%d)\n", - __FILE__,__LINE__, info->device_name, break_state); - - if (sanity_check(info, tty->name, "set_break")) - return -EINVAL; - - spin_lock_irqsave(&info->lock,flags); - RegValue = read_reg(info, CTL); - if (break_state == -1) - RegValue |= BIT3; - else - RegValue &= ~BIT3; - write_reg(info, CTL, RegValue); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -#if SYNCLINK_GENERIC_HDLC - -/** - * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) - * set encoding and frame check sequence (FCS) options - * - * dev pointer to network device structure - * encoding serial encoding setting - * parity FCS setting - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned char new_encoding; - unsigned short new_crctype; - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - switch (encoding) - { - case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; - case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; - case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; - case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; - case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; - default: return -EINVAL; - } - - switch (parity) - { - case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; - case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; - case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; - default: return -EINVAL; - } - - info->params.encoding = new_encoding; - info->params.crc_type = new_crctype; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - - return 0; -} - -/** - * called by generic HDLC layer to send frame - * - * skb socket buffer containing HDLC frame - * dev pointer to network device structure - */ -static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); - - /* stop sending until this frame completes */ - netif_stop_queue(dev); - - /* copy data to device buffers */ - info->tx_count = skb->len; - tx_load_dma_buffer(info, skb->data, skb->len); - - /* update network statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - - /* save start time for transmit timeout detection */ - dev->trans_start = jiffies; - - /* start hardware transmitter if necessary */ - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - - return NETDEV_TX_OK; -} - -/** - * called by network layer when interface enabled - * claim resources and initialize hardware - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_open(struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - int rc; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); - - /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) - return rc; - - /* arbitrate between network and tty opens */ - spin_lock_irqsave(&info->netlock, flags); - if (info->port.count != 0 || info->netcount != 0) { - printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); - spin_unlock_irqrestore(&info->netlock, flags); - return -EBUSY; - } - info->netcount=1; - spin_unlock_irqrestore(&info->netlock, flags); - - /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - return rc; - } - - /* assert DTR and RTS, apply hardware settings */ - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - program_hw(info); - - /* enable network layer transmit */ - dev->trans_start = jiffies; - netif_start_queue(dev); - - /* inform generic HDLC layer of current DCD status */ - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - if (info->serial_signals & SerialSignal_DCD) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - return 0; -} - -/** - * called by network layer when interface is disabled - * shutdown hardware and release resources - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_close(struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); - - netif_stop_queue(dev); - - /* shutdown adapter and release resources */ - shutdown(info); - - hdlc_close(dev); - - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - - return 0; -} - -/** - * called by network layer to process IOCTL call to network device - * - * dev pointer to network device structure - * ifr pointer to network interface request structure - * cmd IOCTL command code - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - const size_t size = sizeof(sync_serial_settings); - sync_serial_settings new_line; - sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; - SLMP_INFO *info = dev_to_port(dev); - unsigned int flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - if (cmd != SIOCWANDEV) - return hdlc_ioctl(dev, ifr, cmd); - - switch(ifr->ifr_settings.type) { - case IF_GET_IFACE: /* return current sync_serial_settings */ - - ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; - if (ifr->ifr_settings.size < size) { - ifr->ifr_settings.size = size; /* data size wanted */ - return -ENOBUFS; - } - - flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - - switch (flags){ - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; - case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; - default: new_line.clock_type = CLOCK_DEFAULT; - } - - new_line.clock_rate = info->params.clock_speed; - new_line.loopback = info->params.loopback ? 1:0; - - if (copy_to_user(line, &new_line, size)) - return -EFAULT; - return 0; - - case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&new_line, line, size)) - return -EFAULT; - - switch (new_line.clock_type) - { - case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; - case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; - case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; - case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; - case CLOCK_DEFAULT: flags = info->params.flags & - (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; - default: return -EINVAL; - } - - if (new_line.loopback != 0 && new_line.loopback != 1) - return -EINVAL; - - info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - info->params.flags |= flags; - - info->params.loopback = new_line.loopback; - - if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) - info->params.clock_speed = new_line.clock_rate; - else - info->params.clock_speed = 0; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - return 0; - - default: - return hdlc_ioctl(dev, ifr, cmd); - } -} - -/** - * called by network layer when transmit timeout is detected - * - * dev pointer to network device structure - */ -static void hdlcdev_tx_timeout(struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_tx_timeout(%s)\n",dev->name); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - spin_lock_irqsave(&info->lock,flags); - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); - - netif_wake_queue(dev); -} - -/** - * called by device driver when transmit completes - * reenable network layer transmit if stopped - * - * info pointer to device instance information - */ -static void hdlcdev_tx_done(SLMP_INFO *info) -{ - if (netif_queue_stopped(info->netdev)) - netif_wake_queue(info->netdev); -} - -/** - * called by device driver when frame received - * pass frame to network layer - * - * info pointer to device instance information - * buf pointer to buffer contianing frame data - * size count of data bytes in buf - */ -static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size) -{ - struct sk_buff *skb = dev_alloc_skb(size); - struct net_device *dev = info->netdev; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_rx(%s)\n",dev->name); - - if (skb == NULL) { - printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", - dev->name); - dev->stats.rx_dropped++; - return; - } - - memcpy(skb_put(skb, size), buf, size); - - skb->protocol = hdlc_type_trans(skb, dev); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - - netif_rx(skb); -} - -static const struct net_device_ops hdlcdev_ops = { - .ndo_open = hdlcdev_open, - .ndo_stop = hdlcdev_close, - .ndo_change_mtu = hdlc_change_mtu, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_do_ioctl = hdlcdev_ioctl, - .ndo_tx_timeout = hdlcdev_tx_timeout, -}; - -/** - * called by device driver when adding device instance - * do generic HDLC initialization - * - * info pointer to device instance information - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_init(SLMP_INFO *info) -{ - int rc; - struct net_device *dev; - hdlc_device *hdlc; - - /* allocate and initialize network and HDLC layer objects */ - - if (!(dev = alloc_hdlcdev(info))) { - printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); - return -ENOMEM; - } - - /* for network layer reporting purposes only */ - dev->mem_start = info->phys_sca_base; - dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1; - dev->irq = info->irq_level; - - /* network layer callbacks and settings */ - dev->netdev_ops = &hdlcdev_ops; - dev->watchdog_timeo = 10 * HZ; - dev->tx_queue_len = 50; - - /* generic HDLC layer callbacks and settings */ - hdlc = dev_to_hdlc(dev); - hdlc->attach = hdlcdev_attach; - hdlc->xmit = hdlcdev_xmit; - - /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { - printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); - free_netdev(dev); - return rc; - } - - info->netdev = dev; - return 0; -} - -/** - * called by device driver when removing device instance - * do generic HDLC cleanup - * - * info pointer to device instance information - */ -static void hdlcdev_exit(SLMP_INFO *info) -{ - unregister_hdlc_device(info->netdev); - free_netdev(info->netdev); - info->netdev = NULL; -} - -#endif /* CONFIG_HDLC */ - - -/* Return next bottom half action to perform. - * Return Value: BH action code or 0 if nothing to do. - */ -static int bh_action(SLMP_INFO *info) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&info->lock,flags); - - if (info->pending_bh & BH_RECEIVE) { - info->pending_bh &= ~BH_RECEIVE; - rc = BH_RECEIVE; - } else if (info->pending_bh & BH_TRANSMIT) { - info->pending_bh &= ~BH_TRANSMIT; - rc = BH_TRANSMIT; - } else if (info->pending_bh & BH_STATUS) { - info->pending_bh &= ~BH_STATUS; - rc = BH_STATUS; - } - - if (!rc) { - /* Mark BH routine as complete */ - info->bh_running = false; - info->bh_requested = false; - } - - spin_unlock_irqrestore(&info->lock,flags); - - return rc; -} - -/* Perform bottom half processing of work items queued by ISR. - */ -static void bh_handler(struct work_struct *work) -{ - SLMP_INFO *info = container_of(work, SLMP_INFO, task); - int action; - - if (!info) - return; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() entry\n", - __FILE__,__LINE__,info->device_name); - - info->bh_running = true; - - while((action = bh_action(info)) != 0) { - - /* Process work item */ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() work item action=%d\n", - __FILE__,__LINE__,info->device_name, action); - - switch (action) { - - case BH_RECEIVE: - bh_receive(info); - break; - case BH_TRANSMIT: - bh_transmit(info); - break; - case BH_STATUS: - bh_status(info); - break; - default: - /* unknown work item ID */ - printk("%s(%d):%s Unknown work item ID=%08X!\n", - __FILE__,__LINE__,info->device_name,action); - break; - } - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() exit\n", - __FILE__,__LINE__,info->device_name); -} - -static void bh_receive(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_receive()\n", - __FILE__,__LINE__,info->device_name); - - while( rx_get_frame(info) ); -} - -static void bh_transmit(SLMP_INFO *info) -{ - struct tty_struct *tty = info->port.tty; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_transmit() entry\n", - __FILE__,__LINE__,info->device_name); - - if (tty) - tty_wakeup(tty); -} - -static void bh_status(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_status() entry\n", - __FILE__,__LINE__,info->device_name); - - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - info->dcd_chkcount = 0; - info->cts_chkcount = 0; -} - -static void isr_timer(SLMP_INFO * info) -{ - unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; - - /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */ - write_reg(info, IER2, 0); - - /* TMCS, Timer Control/Status Register - * - * 07 CMF, Compare match flag (read only) 1=match - * 06 ECMI, CMF Interrupt Enable: 0=disabled - * 05 Reserved, must be 0 - * 04 TME, Timer Enable - * 03..00 Reserved, must be 0 - * - * 0000 0000 - */ - write_reg(info, (unsigned char)(timer + TMCS), 0); - - info->irq_occurred = true; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_timer()\n", - __FILE__,__LINE__,info->device_name); -} - -static void isr_rxint(SLMP_INFO * info) -{ - struct tty_struct *tty = info->port.tty; - struct mgsl_icount *icount = &info->icount; - unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD); - unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN; - - /* clear status bits */ - if (status) - write_reg(info, SR1, status); - - if (status2) - write_reg(info, SR2, status2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxint status=%02X %02x\n", - __FILE__,__LINE__,info->device_name,status,status2); - - if (info->params.mode == MGSL_MODE_ASYNC) { - if (status & BRKD) { - icount->brk++; - - /* process break detection if tty control - * is not set to ignore it - */ - if ( tty ) { - if (!(status & info->ignore_status_mask1)) { - if (info->read_status_mask1 & BRKD) { - tty_insert_flip_char(tty, 0, TTY_BREAK); - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } - } - } - } - } - else { - if (status & (FLGD|IDLD)) { - if (status & FLGD) - info->icount.exithunt++; - else if (status & IDLD) - info->icount.rxidle++; - wake_up_interruptible(&info->event_wait_q); - } - } - - if (status & CDCD) { - /* simulate a common modem status change interrupt - * for our handler - */ - get_signals( info ); - isr_io_pin(info, - MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD)); - } -} - -/* - * handle async rx data interrupts - */ -static void isr_rxrdy(SLMP_INFO * info) -{ - u16 status; - unsigned char DataByte; - struct tty_struct *tty = info->port.tty; - struct mgsl_icount *icount = &info->icount; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxrdy\n", - __FILE__,__LINE__,info->device_name); - - while((status = read_reg(info,CST0)) & BIT0) - { - int flag = 0; - bool over = false; - DataByte = read_reg(info,TRB); - - icount->rx++; - - if ( status & (PE + FRME + OVRN) ) { - printk("%s(%d):%s rxerr=%04X\n", - __FILE__,__LINE__,info->device_name,status); - - /* update error statistics */ - if (status & PE) - icount->parity++; - else if (status & FRME) - icount->frame++; - else if (status & OVRN) - icount->overrun++; - - /* discard char if tty control flags say so */ - if (status & info->ignore_status_mask2) - continue; - - status &= info->read_status_mask2; - - if ( tty ) { - if (status & PE) - flag = TTY_PARITY; - else if (status & FRME) - flag = TTY_FRAME; - if (status & OVRN) { - /* Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - over = true; - } - } - } /* end of if (error) */ - - if ( tty ) { - tty_insert_flip_char(tty, DataByte, flag); - if (over) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - } - - if ( debug_level >= DEBUG_LEVEL_ISR ) { - printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n", - __FILE__,__LINE__,info->device_name, - icount->rx,icount->brk,icount->parity, - icount->frame,icount->overrun); - } - - if ( tty ) - tty_flip_buffer_push(tty); -} - -static void isr_txeom(SLMP_INFO * info, unsigned char status) -{ - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txeom status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ - write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - if (status & UDRN) { - write_reg(info, CMD, TXRESET); - write_reg(info, CMD, TXENABLE); - } else - write_reg(info, CMD, TXBUFCLR); - - /* disable and clear tx interrupts */ - info->ie0_value &= ~TXRDYE; - info->ie1_value &= ~(IDLE + UDRN); - write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); - write_reg(info, SR1, (unsigned char)(UDRN + IDLE)); - - if ( info->tx_active ) { - if (info->params.mode != MGSL_MODE_ASYNC) { - if (status & UDRN) - info->icount.txunder++; - else if (status & IDLE) - info->icount.txok++; - } - - info->tx_active = false; - info->tx_count = info->tx_put = info->tx_get = 0; - - del_timer(&info->tx_timer); - - if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) { - info->serial_signals &= ~SerialSignal_RTS; - info->drop_rts_on_tx_done = false; - set_signals(info); - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { - tx_stop(info); - return; - } - info->pending_bh |= BH_TRANSMIT; - } - } -} - - -/* - * handle tx status interrupts - */ -static void isr_txint(SLMP_INFO * info) -{ - unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS); - - /* clear status bits */ - write_reg(info, SR1, status); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txint status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - if (status & (UDRN + IDLE)) - isr_txeom(info, status); - - if (status & CCTS) { - /* simulate a common modem status change interrupt - * for our handler - */ - get_signals( info ); - isr_io_pin(info, - MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS)); - - } -} - -/* - * handle async tx data interrupts - */ -static void isr_txrdy(SLMP_INFO * info) -{ - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txrdy() tx_count=%d\n", - __FILE__,__LINE__,info->device_name,info->tx_count); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* disable TXRDY IRQ, enable IDLE IRQ */ - info->ie0_value &= ~TXRDYE; - info->ie1_value |= IDLE; - write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); - return; - } - - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { - tx_stop(info); - return; - } - - if ( info->tx_count ) - tx_load_fifo( info ); - else { - info->tx_active = false; - info->ie0_value &= ~TXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - if (info->tx_count < WAKEUP_CHARS) - info->pending_bh |= BH_TRANSMIT; -} - -static void isr_rxdmaok(SLMP_INFO * info) -{ - /* BIT7 = EOT (end of transfer) - * BIT6 = EOM (end of message/frame) - */ - unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxdmaok(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - info->pending_bh |= BH_RECEIVE; -} - -static void isr_rxdmaerror(SLMP_INFO * info) -{ - /* BIT5 = BOF (buffer overflow) - * BIT4 = COF (counter overflow) - */ - unsigned char status = read_reg(info,RXDMA + DSR) & 0x30; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - info->rx_overflow = true; - info->pending_bh |= BH_RECEIVE; -} - -static void isr_txdmaok(SLMP_INFO * info) -{ - unsigned char status_reg1 = read_reg(info, SR1); - - write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ - write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txdmaok(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status_reg1); - - /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */ - write_reg16(info, TRC0, 0); - info->ie0_value |= TXRDYE; - write_reg(info, IE0, info->ie0_value); -} - -static void isr_txdmaerror(SLMP_INFO * info) -{ - /* BIT5 = BOF (buffer overflow) - * BIT4 = COF (counter overflow) - */ - unsigned char status = read_reg(info,TXDMA + DSR) & 0x30; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, TXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txdmaerror(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); -} - -/* handle input serial signal changes - */ -static void isr_io_pin( SLMP_INFO *info, u16 status ) -{ - struct mgsl_icount *icount; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):isr_io_pin status=%04X\n", - __FILE__,__LINE__,status); - - if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | - MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { - icount = &info->icount; - /* update input line counters */ - if (status & MISCSTATUS_RI_LATCHED) { - icount->rng++; - if ( status & SerialSignal_RI ) - info->input_signal_events.ri_up++; - else - info->input_signal_events.ri_down++; - } - if (status & MISCSTATUS_DSR_LATCHED) { - icount->dsr++; - if ( status & SerialSignal_DSR ) - info->input_signal_events.dsr_up++; - else - info->input_signal_events.dsr_down++; - } - if (status & MISCSTATUS_DCD_LATCHED) { - if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { - info->ie1_value &= ~CDCD; - write_reg(info, IE1, info->ie1_value); - } - icount->dcd++; - if (status & SerialSignal_DCD) { - info->input_signal_events.dcd_up++; - } else - info->input_signal_events.dcd_down++; -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) { - if (status & SerialSignal_DCD) - netif_carrier_on(info->netdev); - else - netif_carrier_off(info->netdev); - } -#endif - } - if (status & MISCSTATUS_CTS_LATCHED) - { - if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { - info->ie1_value &= ~CCTS; - write_reg(info, IE1, info->ie1_value); - } - icount->cts++; - if ( status & SerialSignal_CTS ) - info->input_signal_events.cts_up++; - else - info->input_signal_events.cts_down++; - } - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - if ( (info->port.flags & ASYNC_CHECK_CD) && - (status & MISCSTATUS_DCD_LATCHED) ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s CD now %s...", info->device_name, - (status & SerialSignal_DCD) ? "on" : "off"); - if (status & SerialSignal_DCD) - wake_up_interruptible(&info->port.open_wait); - else { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("doing serial hangup..."); - if (info->port.tty) - tty_hangup(info->port.tty); - } - } - - if ( (info->port.flags & ASYNC_CTS_FLOW) && - (status & MISCSTATUS_CTS_LATCHED) ) { - if ( info->port.tty ) { - if (info->port.tty->hw_stopped) { - if (status & SerialSignal_CTS) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx start..."); - info->port.tty->hw_stopped = 0; - tx_start(info); - info->pending_bh |= BH_TRANSMIT; - return; - } - } else { - if (!(status & SerialSignal_CTS)) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx stop..."); - info->port.tty->hw_stopped = 1; - tx_stop(info); - } - } - } - } - } - - info->pending_bh |= BH_STATUS; -} - -/* Interrupt service routine entry point. - * - * Arguments: - * irq interrupt number that caused interrupt - * dev_id device ID supplied during interrupt registration - * regs interrupted processor context - */ -static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id) -{ - SLMP_INFO *info = dev_id; - unsigned char status, status0, status1=0; - unsigned char dmastatus, dmastatus0, dmastatus1=0; - unsigned char timerstatus0, timerstatus1=0; - unsigned char shift; - unsigned int i; - unsigned short tmp; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n", - __FILE__, __LINE__, info->irq_level); - - spin_lock(&info->lock); - - for(;;) { - - /* get status for SCA0 (ports 0-1) */ - tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */ - status0 = (unsigned char)tmp; - dmastatus0 = (unsigned char)(tmp>>8); - timerstatus0 = read_reg(info, ISR2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", - __FILE__, __LINE__, info->device_name, - status0, dmastatus0, timerstatus0); - - if (info->port_count == 4) { - /* get status for SCA1 (ports 2-3) */ - tmp = read_reg16(info->port_array[2], ISR0); - status1 = (unsigned char)tmp; - dmastatus1 = (unsigned char)(tmp>>8); - timerstatus1 = read_reg(info->port_array[2], ISR2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n", - __FILE__,__LINE__,info->device_name, - status1,dmastatus1,timerstatus1); - } - - if (!status0 && !dmastatus0 && !timerstatus0 && - !status1 && !dmastatus1 && !timerstatus1) - break; - - for(i=0; i < info->port_count ; i++) { - if (info->port_array[i] == NULL) - continue; - if (i < 2) { - status = status0; - dmastatus = dmastatus0; - } else { - status = status1; - dmastatus = dmastatus1; - } - - shift = i & 1 ? 4 :0; - - if (status & BIT0 << shift) - isr_rxrdy(info->port_array[i]); - if (status & BIT1 << shift) - isr_txrdy(info->port_array[i]); - if (status & BIT2 << shift) - isr_rxint(info->port_array[i]); - if (status & BIT3 << shift) - isr_txint(info->port_array[i]); - - if (dmastatus & BIT0 << shift) - isr_rxdmaerror(info->port_array[i]); - if (dmastatus & BIT1 << shift) - isr_rxdmaok(info->port_array[i]); - if (dmastatus & BIT2 << shift) - isr_txdmaerror(info->port_array[i]); - if (dmastatus & BIT3 << shift) - isr_txdmaok(info->port_array[i]); - } - - if (timerstatus0 & (BIT5 | BIT4)) - isr_timer(info->port_array[0]); - if (timerstatus0 & (BIT7 | BIT6)) - isr_timer(info->port_array[1]); - if (timerstatus1 & (BIT5 | BIT4)) - isr_timer(info->port_array[2]); - if (timerstatus1 & (BIT7 | BIT6)) - isr_timer(info->port_array[3]); - } - - for(i=0; i < info->port_count ; i++) { - SLMP_INFO * port = info->port_array[i]; - - /* Request bottom half processing if there's something - * for it to do and the bh is not already running. - * - * Note: startup adapter diags require interrupts. - * do not request bottom half processing if the - * device is not open in a normal mode. - */ - if ( port && (port->port.count || port->netcount) && - port->pending_bh && !port->bh_running && - !port->bh_requested ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s queueing bh task.\n", - __FILE__,__LINE__,port->device_name); - schedule_work(&port->task); - port->bh_requested = true; - } - } - - spin_unlock(&info->lock); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n", - __FILE__, __LINE__, info->irq_level); - return IRQ_HANDLED; -} - -/* Initialize and start device. - */ -static int startup(SLMP_INFO * info) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name); - - if (info->port.flags & ASYNC_INITIALIZED) - return 0; - - if (!info->tx_buf) { - info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); - if (!info->tx_buf) { - printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", - __FILE__,__LINE__,info->device_name); - return -ENOMEM; - } - } - - info->pending_bh = 0; - - memset(&info->icount, 0, sizeof(info->icount)); - - /* program hardware for current parameters */ - reset_port(info); - - change_params(info); - - mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags |= ASYNC_INITIALIZED; - - return 0; -} - -/* Called by close() and hangup() to shutdown hardware - */ -static void shutdown(SLMP_INFO * info) -{ - unsigned long flags; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s synclinkmp_shutdown()\n", - __FILE__,__LINE__, info->device_name ); - - /* clear status wait queue because status changes */ - /* can't happen after shutting down the hardware */ - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - del_timer(&info->tx_timer); - del_timer(&info->status_timer); - - kfree(info->tx_buf); - info->tx_buf = NULL; - - spin_lock_irqsave(&info->lock,flags); - - reset_port(info); - - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { - info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - set_signals(info); - } - - spin_unlock_irqrestore(&info->lock,flags); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; -} - -static void program_hw(SLMP_INFO *info) -{ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - - rx_stop(info); - tx_stop(info); - - info->tx_count = info->tx_put = info->tx_get = 0; - - if (info->params.mode == MGSL_MODE_HDLC || info->netcount) - hdlc_mode(info); - else - async_mode(info); - - set_signals(info); - - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - - info->ie1_value |= (CDCD|CCTS); - write_reg(info, IE1, info->ie1_value); - - get_signals(info); - - if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) ) - rx_start(info); - - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Reconfigure adapter based on new parameters - */ -static void change_params(SLMP_INFO *info) -{ - unsigned cflag; - int bits_per_char; - - if (!info->port.tty || !info->port.tty->termios) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s change_params()\n", - __FILE__,__LINE__, info->device_name ); - - cflag = info->port.tty->termios->c_cflag; - - /* if B0 rate (hangup) specified then negate DTR and RTS */ - /* otherwise assert DTR and RTS */ - if (cflag & CBAUD) - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - - /* byte size and parity */ - - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: info->params.data_bits = 7; break; - } - - if (cflag & CSTOPB) - info->params.stop_bits = 2; - else - info->params.stop_bits = 1; - - info->params.parity = ASYNC_PARITY_NONE; - if (cflag & PARENB) { - if (cflag & PARODD) - info->params.parity = ASYNC_PARITY_ODD; - else - info->params.parity = ASYNC_PARITY_EVEN; -#ifdef CMSPAR - if (cflag & CMSPAR) - info->params.parity = ASYNC_PARITY_SPACE; -#endif - } - - /* calculate number of jiffies to transmit a full - * FIFO (32 bytes) at specified data rate - */ - bits_per_char = info->params.data_bits + - info->params.stop_bits + 1; - - /* if port data rate is set to 460800 or less then - * allow tty settings to override, otherwise keep the - * current data rate. - */ - if (info->params.data_rate <= 460800) { - info->params.data_rate = tty_get_baud_rate(info->port.tty); - } - - if ( info->params.data_rate ) { - info->timeout = (32*HZ*bits_per_char) / - info->params.data_rate; - } - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - if (cflag & CRTSCTS) - info->port.flags |= ASYNC_CTS_FLOW; - else - info->port.flags &= ~ASYNC_CTS_FLOW; - - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - /* process tty input control flags */ - - info->read_status_mask2 = OVRN; - if (I_INPCK(info->port.tty)) - info->read_status_mask2 |= PE | FRME; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask1 |= BRKD; - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask2 |= PE | FRME; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask1 |= BRKD; - /* If ignoring parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask2 |= OVRN; - } - - program_hw(info); -} - -static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_params()\n", - __FILE__,__LINE__, info->device_name); - - if (!user_icount) { - memset(&info->icount, 0, sizeof(info->icount)); - } else { - mutex_lock(&info->port.mutex); - COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); - mutex_unlock(&info->port.mutex); - if (err) - return -EFAULT; - } - - return 0; -} - -static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_params()\n", - __FILE__,__LINE__, info->device_name); - - mutex_lock(&info->port.mutex); - COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); - mutex_unlock(&info->port.mutex); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s get_params() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; -} - -static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) -{ - unsigned long flags; - MGSL_PARAMS tmp_params; - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_params\n", - __FILE__,__LINE__,info->device_name ); - COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s set_params() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - mutex_lock(&info->port.mutex); - spin_lock_irqsave(&info->lock,flags); - memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->lock,flags); - - change_params(info); - mutex_unlock(&info->port.mutex); - - return 0; -} - -static int get_txidle(SLMP_INFO * info, int __user *idle_mode) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_txidle()=%d\n", - __FILE__,__LINE__, info->device_name, info->idle_mode); - - COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s get_txidle() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; -} - -static int set_txidle(SLMP_INFO * info, int idle_mode) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_txidle(%d)\n", - __FILE__,__LINE__,info->device_name, idle_mode ); - - spin_lock_irqsave(&info->lock,flags); - info->idle_mode = idle_mode; - tx_set_idle( info ); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int tx_enable(SLMP_INFO * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tx_enable(%d)\n", - __FILE__,__LINE__,info->device_name, enable); - - spin_lock_irqsave(&info->lock,flags); - if ( enable ) { - if ( !info->tx_enabled ) { - tx_start(info); - } - } else { - if ( info->tx_enabled ) - tx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* abort send HDLC frame - */ -static int tx_abort(SLMP_INFO * info) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tx_abort()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) { - info->ie1_value &= ~UDRN; - info->ie1_value |= IDLE; - write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - write_reg(info, CMD, TXABORT); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int rx_enable(SLMP_INFO * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s rx_enable(%d)\n", - __FILE__,__LINE__,info->device_name,enable); - - spin_lock_irqsave(&info->lock,flags); - if ( enable ) { - if ( !info->rx_enabled ) - rx_start(info); - } else { - if ( info->rx_enabled ) - rx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* wait for specified event to occur - */ -static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr) -{ - unsigned long flags; - int s; - int rc=0; - struct mgsl_icount cprev, cnow; - int events; - int mask; - struct _input_signal_events oldsigs, newsigs; - DECLARE_WAITQUEUE(wait, current); - - COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); - if (rc) { - return -EFAULT; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_mgsl_event(%d)\n", - __FILE__,__LINE__,info->device_name,mask); - - spin_lock_irqsave(&info->lock,flags); - - /* return immediately if state matches requested events */ - get_signals(info); - s = info->serial_signals; - - events = mask & - ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + - ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + - ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); - if (events) { - spin_unlock_irqrestore(&info->lock,flags); - goto exit; - } - - /* save current irq counts */ - cprev = info->icount; - oldsigs = info->input_signal_events; - - /* enable hunt and idle irqs if needed */ - if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { - unsigned char oldval = info->ie1_value; - unsigned char newval = oldval + - (mask & MgslEvent_ExitHuntMode ? FLGD:0) + - (mask & MgslEvent_IdleReceived ? IDLD:0); - if ( oldval != newval ) { - info->ie1_value = newval; - write_reg(info, IE1, info->ie1_value); - } - } - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&info->event_wait_q, &wait); - - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - newsigs = info->input_signal_events; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (newsigs.dsr_up == oldsigs.dsr_up && - newsigs.dsr_down == oldsigs.dsr_down && - newsigs.dcd_up == oldsigs.dcd_up && - newsigs.dcd_down == oldsigs.dcd_down && - newsigs.cts_up == oldsigs.cts_up && - newsigs.cts_down == oldsigs.cts_down && - newsigs.ri_up == oldsigs.ri_up && - newsigs.ri_down == oldsigs.ri_down && - cnow.exithunt == cprev.exithunt && - cnow.rxidle == cprev.rxidle) { - rc = -EIO; - break; - } - - events = mask & - ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + - (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + - (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + - (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + - (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + - (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + - (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + - (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + - (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + - (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); - if (events) - break; - - cprev = cnow; - oldsigs = newsigs; - } - - remove_wait_queue(&info->event_wait_q, &wait); - set_current_state(TASK_RUNNING); - - - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - spin_lock_irqsave(&info->lock,flags); - if (!waitqueue_active(&info->event_wait_q)) { - /* disable enable exit hunt mode/idle rcvd IRQs */ - info->ie1_value &= ~(FLGD|IDLD); - write_reg(info, IE1, info->ie1_value); - } - spin_unlock_irqrestore(&info->lock,flags); - } -exit: - if ( rc == 0 ) - PUT_USER(rc, events, mask_ptr); - - return rc; -} - -static int modem_input_wait(SLMP_INFO *info,int arg) -{ - unsigned long flags; - int rc; - struct mgsl_icount cprev, cnow; - DECLARE_WAITQUEUE(wait, current); - - /* save current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cprev = info->icount; - add_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get new irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; - break; - } - - /* check for change in caller specified modem input */ - if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || - (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || - (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || - (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { - rc = 0; - break; - } - - cprev = cnow; - } - remove_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_RUNNING); - return rc; -} - -/* return the state of the serial control and status signals - */ -static int tiocmget(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + - ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + - ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + - ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + - ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + - ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmget() value=%08X\n", - __FILE__,__LINE__, info->device_name, result ); - return result; -} - -/* set modem control signals (DTR/RTS) - */ -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmset(%x,%x)\n", - __FILE__,__LINE__,info->device_name, set, clear); - - if (set & TIOCM_RTS) - info->serial_signals |= SerialSignal_RTS; - if (set & TIOCM_DTR) - info->serial_signals |= SerialSignal_DTR; - if (clear & TIOCM_RTS) - info->serial_signals &= ~SerialSignal_RTS; - if (clear & TIOCM_DTR) - info->serial_signals &= ~SerialSignal_DTR; - - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - return 0; -} - -static int carrier_raised(struct tty_port *port) -{ - SLMP_INFO *info = container_of(port, SLMP_INFO, port); - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - SLMP_INFO *info = container_of(port, SLMP_INFO, port); - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - if (on) - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Block the current process until the specified port is ready to open. - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - SLMP_INFO *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - bool extra_count = false; - unsigned long flags; - int cd; - struct tty_port *port = &info->port; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready()\n", - __FILE__,__LINE__, tty->driver->name ); - - if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ - /* nonblock mode is set or port is not enabled */ - /* just verify that callout device is not active */ - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() before block, count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) { - extra_count = true; - port->count--; - } - spin_unlock_irqrestore(&info->lock, flags); - port->blocked_open++; - - while (1) { - if (tty->termios->c_cflag & CBAUD) - tty_port_raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ - retval = (port->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - cd = tty_port_carrier_raised(port); - - if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd)) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - tty_unlock(); - schedule(); - tty_lock(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - if (extra_count) - port->count++; - port->blocked_open--; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() after, count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - if (!retval) - port->flags |= ASYNC_NORMAL_ACTIVE; - - return retval; -} - -static int alloc_dma_bufs(SLMP_INFO *info) -{ - unsigned short BuffersPerFrame; - unsigned short BufferCount; - - // Force allocation to start at 64K boundary for each port. - // This is necessary because *all* buffer descriptors for a port - // *must* be in the same 64K block. All descriptors on a port - // share a common 'base' address (upper 8 bits of 24 bits) programmed - // into the CBP register. - info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num; - - /* Calculate the number of DMA buffers necessary to hold the */ - /* largest allowable frame size. Note: If the max frame size is */ - /* not an even multiple of the DMA buffer size then we need to */ - /* round the buffer count per frame up one. */ - - BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE); - if ( info->max_frame_size % SCABUFSIZE ) - BuffersPerFrame++; - - /* calculate total number of data buffers (SCABUFSIZE) possible - * in one ports memory (SCA_MEM_SIZE/4) after allocating memory - * for the descriptor list (BUFFERLISTSIZE). - */ - BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE; - - /* limit number of buffers to maximum amount of descriptors */ - if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC)) - BufferCount = BUFFERLISTSIZE/sizeof(SCADESC); - - /* use enough buffers to transmit one max size frame */ - info->tx_buf_count = BuffersPerFrame + 1; - - /* never use more than half the available buffers for transmit */ - if (info->tx_buf_count > (BufferCount/2)) - info->tx_buf_count = BufferCount/2; - - if (info->tx_buf_count > SCAMAXDESC) - info->tx_buf_count = SCAMAXDESC; - - /* use remaining buffers for receive */ - info->rx_buf_count = BufferCount - info->tx_buf_count; - - if (info->rx_buf_count > SCAMAXDESC) - info->rx_buf_count = SCAMAXDESC; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n", - __FILE__,__LINE__, info->device_name, - info->tx_buf_count,info->rx_buf_count); - - if ( alloc_buf_list( info ) < 0 || - alloc_frame_bufs(info, - info->rx_buf_list, - info->rx_buf_list_ex, - info->rx_buf_count) < 0 || - alloc_frame_bufs(info, - info->tx_buf_list, - info->tx_buf_list_ex, - info->tx_buf_count) < 0 || - alloc_tmp_rx_buf(info) < 0 ) { - printk("%s(%d):%s Can't allocate DMA buffer memory\n", - __FILE__,__LINE__, info->device_name); - return -ENOMEM; - } - - rx_reset_buffers( info ); - - return 0; -} - -/* Allocate DMA buffers for the transmit and receive descriptor lists. - */ -static int alloc_buf_list(SLMP_INFO *info) -{ - unsigned int i; - - /* build list in adapter shared memory */ - info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc; - info->buffer_list_phys = info->port_array[0]->last_mem_alloc; - info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE; - - memset(info->buffer_list, 0, BUFFERLISTSIZE); - - /* Save virtual address pointers to the receive and */ - /* transmit buffer lists. (Receive 1st). These pointers will */ - /* be used by the processor to access the lists. */ - info->rx_buf_list = (SCADESC *)info->buffer_list; - - info->tx_buf_list = (SCADESC *)info->buffer_list; - info->tx_buf_list += info->rx_buf_count; - - /* Build links for circular buffer entry lists (tx and rx) - * - * Note: links are physical addresses read by the SCA device - * to determine the next buffer entry to use. - */ - - for ( i = 0; i < info->rx_buf_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->rx_buf_list_ex[i].phys_entry = - info->buffer_list_phys + (i * sizeof(SCABUFSIZE)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - info->rx_buf_list[i].next = info->buffer_list_phys; - if ( i < info->rx_buf_count - 1 ) - info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC); - - info->rx_buf_list[i].length = SCABUFSIZE; - } - - for ( i = 0; i < info->tx_buf_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys + - ((info->rx_buf_count + i) * sizeof(SCADESC)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - - info->tx_buf_list[i].next = info->buffer_list_phys + - info->rx_buf_count * sizeof(SCADESC); - - if ( i < info->tx_buf_count - 1 ) - info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC); - } - - return 0; -} - -/* Allocate the frame DMA buffers used by the specified buffer list. - */ -static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) -{ - int i; - unsigned long phys_addr; - - for ( i = 0; i < count; i++ ) { - buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc; - phys_addr = info->port_array[0]->last_mem_alloc; - info->port_array[0]->last_mem_alloc += SCABUFSIZE; - - buf_list[i].buf_ptr = (unsigned short)phys_addr; - buf_list[i].buf_base = (unsigned char)(phys_addr >> 16); - } - - return 0; -} - -static void free_dma_bufs(SLMP_INFO *info) -{ - info->buffer_list = NULL; - info->rx_buf_list = NULL; - info->tx_buf_list = NULL; -} - -/* allocate buffer large enough to hold max_frame_size. - * This buffer is used to pass an assembled frame to the line discipline. - */ -static int alloc_tmp_rx_buf(SLMP_INFO *info) -{ - info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); - if (info->tmp_rx_buf == NULL) - return -ENOMEM; - return 0; -} - -static void free_tmp_rx_buf(SLMP_INFO *info) -{ - kfree(info->tmp_rx_buf); - info->tmp_rx_buf = NULL; -} - -static int claim_resources(SLMP_INFO *info) -{ - if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->shared_mem_requested = true; - - if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) { - printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->lcr_mem_requested = true; - - if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_sca_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->sca_base_requested = true; - - if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_statctrl_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->sca_statctrl_requested = true; - - info->memory_base = ioremap_nocache(info->phys_memory_base, - SCA_MEM_SIZE); - if (!info->memory_base) { - printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - - info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE); - if (!info->lcr_base) { - printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->lcr_base += info->lcr_offset; - - info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE); - if (!info->sca_base) { - printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_sca_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->sca_base += info->sca_offset; - - info->statctrl_base = ioremap_nocache(info->phys_statctrl_base, - PAGE_SIZE); - if (!info->statctrl_base) { - printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_statctrl_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->statctrl_base += info->statctrl_offset; - - if ( !memory_test(info) ) { - printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - info->init_error = DiagStatus_MemoryError; - goto errout; - } - - return 0; - -errout: - release_resources( info ); - return -ENODEV; -} - -static void release_resources(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s release_resources() entry\n", - __FILE__,__LINE__,info->device_name ); - - if ( info->irq_requested ) { - free_irq(info->irq_level, info); - info->irq_requested = false; - } - - if ( info->shared_mem_requested ) { - release_mem_region(info->phys_memory_base,SCA_MEM_SIZE); - info->shared_mem_requested = false; - } - if ( info->lcr_mem_requested ) { - release_mem_region(info->phys_lcr_base + info->lcr_offset,128); - info->lcr_mem_requested = false; - } - if ( info->sca_base_requested ) { - release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE); - info->sca_base_requested = false; - } - if ( info->sca_statctrl_requested ) { - release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE); - info->sca_statctrl_requested = false; - } - - if (info->memory_base){ - iounmap(info->memory_base); - info->memory_base = NULL; - } - - if (info->sca_base) { - iounmap(info->sca_base - info->sca_offset); - info->sca_base=NULL; - } - - if (info->statctrl_base) { - iounmap(info->statctrl_base - info->statctrl_offset); - info->statctrl_base=NULL; - } - - if (info->lcr_base){ - iounmap(info->lcr_base - info->lcr_offset); - info->lcr_base = NULL; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s release_resources() exit\n", - __FILE__,__LINE__,info->device_name ); -} - -/* Add the specified device instance data structure to the - * global linked list of devices and increment the device count. - */ -static void add_device(SLMP_INFO *info) -{ - info->next_device = NULL; - info->line = synclinkmp_device_count; - sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num); - - if (info->line < MAX_DEVICES) { - if (maxframe[info->line]) - info->max_frame_size = maxframe[info->line]; - } - - synclinkmp_device_count++; - - if ( !synclinkmp_device_list ) - synclinkmp_device_list = info; - else { - SLMP_INFO *current_dev = synclinkmp_device_list; - while( current_dev->next_device ) - current_dev = current_dev->next_device; - current_dev->next_device = info; - } - - if ( info->max_frame_size < 4096 ) - info->max_frame_size = 4096; - else if ( info->max_frame_size > 65535 ) - info->max_frame_size = 65535; - - printk( "SyncLink MultiPort %s: " - "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n", - info->device_name, - info->phys_sca_base, - info->phys_memory_base, - info->phys_statctrl_base, - info->phys_lcr_base, - info->irq_level, - info->max_frame_size ); - -#if SYNCLINK_GENERIC_HDLC - hdlcdev_init(info); -#endif -} - -static const struct tty_port_operations port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - -/* Allocate and initialize a device instance structure - * - * Return Value: pointer to SLMP_INFO if success, otherwise NULL - */ -static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) -{ - SLMP_INFO *info; - - info = kzalloc(sizeof(SLMP_INFO), - GFP_KERNEL); - - if (!info) { - printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n", - __FILE__,__LINE__, adapter_num, port_num); - } else { - tty_port_init(&info->port); - info->port.ops = &port_ops; - info->magic = MGSL_MAGIC; - INIT_WORK(&info->task, bh_handler); - info->max_frame_size = 4096; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->adapter_num = adapter_num; - info->port_num = port_num; - - /* Copy configuration info to device instance data */ - info->irq_level = pdev->irq; - info->phys_lcr_base = pci_resource_start(pdev,0); - info->phys_sca_base = pci_resource_start(pdev,2); - info->phys_memory_base = pci_resource_start(pdev,3); - info->phys_statctrl_base = pci_resource_start(pdev,4); - - /* Because veremap only works on page boundaries we must map - * a larger area than is actually implemented for the LCR - * memory range. We map a full page starting at the page boundary. - */ - info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); - info->phys_lcr_base &= ~(PAGE_SIZE-1); - - info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1); - info->phys_sca_base &= ~(PAGE_SIZE-1); - - info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1); - info->phys_statctrl_base &= ~(PAGE_SIZE-1); - - info->bus_type = MGSL_BUS_TYPE_PCI; - info->irq_flags = IRQF_SHARED; - - setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info); - setup_timer(&info->status_timer, status_timeout, - (unsigned long)info); - - /* Store the PCI9050 misc control register value because a flaw - * in the PCI9050 prevents LCR registers from being read if - * BIOS assigns an LCR base address with bit 7 set. - * - * Only the misc control register is accessed for which only - * write access is needed, so set an initial value and change - * bits to the device instance data as we write the value - * to the actual misc control register. - */ - info->misc_ctrl_value = 0x087e4546; - - /* initial port state is unknown - if startup errors - * occur, init_error will be set to indicate the - * problem. Once the port is fully initialized, - * this value will be set to 0 to indicate the - * port is available. - */ - info->init_error = -1; - } - - return info; -} - -static void device_init(int adapter_num, struct pci_dev *pdev) -{ - SLMP_INFO *port_array[SCA_MAX_PORTS]; - int port; - - /* allocate device instances for up to SCA_MAX_PORTS devices */ - for ( port = 0; port < SCA_MAX_PORTS; ++port ) { - port_array[port] = alloc_dev(adapter_num,port,pdev); - if( port_array[port] == NULL ) { - for ( --port; port >= 0; --port ) - kfree(port_array[port]); - return; - } - } - - /* give copy of port_array to all ports and add to device list */ - for ( port = 0; port < SCA_MAX_PORTS; ++port ) { - memcpy(port_array[port]->port_array,port_array,sizeof(port_array)); - add_device( port_array[port] ); - spin_lock_init(&port_array[port]->lock); - } - - /* Allocate and claim adapter resources */ - if ( !claim_resources(port_array[0]) ) { - - alloc_dma_bufs(port_array[0]); - - /* copy resource information from first port to others */ - for ( port = 1; port < SCA_MAX_PORTS; ++port ) { - port_array[port]->lock = port_array[0]->lock; - port_array[port]->irq_level = port_array[0]->irq_level; - port_array[port]->memory_base = port_array[0]->memory_base; - port_array[port]->sca_base = port_array[0]->sca_base; - port_array[port]->statctrl_base = port_array[0]->statctrl_base; - port_array[port]->lcr_base = port_array[0]->lcr_base; - alloc_dma_bufs(port_array[port]); - } - - if ( request_irq(port_array[0]->irq_level, - synclinkmp_interrupt, - port_array[0]->irq_flags, - port_array[0]->device_name, - port_array[0]) < 0 ) { - printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n", - __FILE__,__LINE__, - port_array[0]->device_name, - port_array[0]->irq_level ); - } - else { - port_array[0]->irq_requested = true; - adapter_test(port_array[0]); - } - } -} - -static const struct tty_operations ops = { - .open = open, - .close = close, - .write = write, - .put_char = put_char, - .flush_chars = flush_chars, - .write_room = write_room, - .chars_in_buffer = chars_in_buffer, - .flush_buffer = flush_buffer, - .ioctl = ioctl, - .throttle = throttle, - .unthrottle = unthrottle, - .send_xchar = send_xchar, - .break_ctl = set_break, - .wait_until_sent = wait_until_sent, - .set_termios = set_termios, - .stop = tx_hold, - .start = tx_release, - .hangup = hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, - .get_icount = get_icount, - .proc_fops = &synclinkmp_proc_fops, -}; - - -static void synclinkmp_cleanup(void) -{ - int rc; - SLMP_INFO *info; - SLMP_INFO *tmp; - - printk("Unloading %s %s\n", driver_name, driver_version); - - if (serial_driver) { - if ((rc = tty_unregister_driver(serial_driver))) - printk("%s(%d) failed to unregister tty driver err=%d\n", - __FILE__,__LINE__,rc); - put_tty_driver(serial_driver); - } - - /* reset devices */ - info = synclinkmp_device_list; - while(info) { - reset_port(info); - info = info->next_device; - } - - /* release devices */ - info = synclinkmp_device_list; - while(info) { -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - free_dma_bufs(info); - free_tmp_rx_buf(info); - if ( info->port_num == 0 ) { - if (info->sca_base) - write_reg(info, LPR, 1); /* set low power mode */ - release_resources(info); - } - tmp = info; - info = info->next_device; - kfree(tmp); - } - - pci_unregister_driver(&synclinkmp_pci_driver); -} - -/* Driver initialization entry point. - */ - -static int __init synclinkmp_init(void) -{ - int rc; - - if (break_on_load) { - synclinkmp_get_text_ptr(); - BREAKPOINT(); - } - - printk("%s %s\n", driver_name, driver_version); - - if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) { - printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); - return rc; - } - - serial_driver = alloc_tty_driver(128); - if (!serial_driver) { - rc = -ENOMEM; - goto error; - } - - /* Initialize the tty_driver structure */ - - serial_driver->owner = THIS_MODULE; - serial_driver->driver_name = "synclinkmp"; - serial_driver->name = "ttySLM"; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->init_termios.c_ispeed = 9600; - serial_driver->init_termios.c_ospeed = 9600; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &ops); - if ((rc = tty_register_driver(serial_driver)) < 0) { - printk("%s(%d):Couldn't register serial driver\n", - __FILE__,__LINE__); - put_tty_driver(serial_driver); - serial_driver = NULL; - goto error; - } - - printk("%s %s, tty major#%d\n", - driver_name, driver_version, - serial_driver->major); - - return 0; - -error: - synclinkmp_cleanup(); - return rc; -} - -static void __exit synclinkmp_exit(void) -{ - synclinkmp_cleanup(); -} - -module_init(synclinkmp_init); -module_exit(synclinkmp_exit); - -/* Set the port for internal loopback mode. - * The TxCLK and RxCLK signals are generated from the BRG and - * the TxD is looped back to the RxD internally. - */ -static void enable_loopback(SLMP_INFO *info, int enable) -{ - if (enable) { - /* MD2 (Mode Register 2) - * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback - */ - write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0))); - - /* degate external TxC clock source */ - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - write_control_reg(info); - - /* RXS/TXS (Rx/Tx clock source) - * 07 Reserved, must be 0 - * 06..04 Clock Source, 100=BRG - * 03..00 Clock Divisor, 0000=1 - */ - write_reg(info, RXS, 0x40); - write_reg(info, TXS, 0x40); - - } else { - /* MD2 (Mode Register 2) - * 01..00 CNCT<1..0> Channel connection, 0=normal - */ - write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0))); - - /* RXS/TXS (Rx/Tx clock source) - * 07 Reserved, must be 0 - * 06..04 Clock Source, 000=RxC/TxC Pin - * 03..00 Clock Divisor, 0000=1 - */ - write_reg(info, RXS, 0x00); - write_reg(info, TXS, 0x00); - } - - /* set LinkSpeed if available, otherwise default to 2Mbps */ - if (info->params.clock_speed) - set_rate(info, info->params.clock_speed); - else - set_rate(info, 3686400); -} - -/* Set the baud rate register to the desired speed - * - * data_rate data rate of clock in bits per second - * A data rate of 0 disables the AUX clock. - */ -static void set_rate( SLMP_INFO *info, u32 data_rate ) -{ - u32 TMCValue; - unsigned char BRValue; - u32 Divisor=0; - - /* fBRG = fCLK/(TMC * 2^BR) - */ - if (data_rate != 0) { - Divisor = 14745600/data_rate; - if (!Divisor) - Divisor = 1; - - TMCValue = Divisor; - - BRValue = 0; - if (TMCValue != 1 && TMCValue != 2) { - /* BRValue of 0 provides 50/50 duty cycle *only* when - * TMCValue is 1 or 2. BRValue of 1 to 9 always provides - * 50/50 duty cycle. - */ - BRValue = 1; - TMCValue >>= 1; - } - - /* while TMCValue is too big for TMC register, divide - * by 2 and increment BR exponent. - */ - for(; TMCValue > 256 && BRValue < 10; BRValue++) - TMCValue >>= 1; - - write_reg(info, TXS, - (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue)); - write_reg(info, RXS, - (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue)); - write_reg(info, TMC, (unsigned char)TMCValue); - } - else { - write_reg(info, TXS,0); - write_reg(info, RXS,0); - write_reg(info, TMC, 0); - } -} - -/* Disable receiver - */ -static void rx_stop(SLMP_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s rx_stop()\n", - __FILE__,__LINE__, info->device_name ); - - write_reg(info, CMD, RXRESET); - - info->ie0_value &= ~RXRDYE; - write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */ - - write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ - write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ - write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */ - - info->rx_enabled = false; - info->rx_overflow = false; -} - -/* enable the receiver - */ -static void rx_start(SLMP_INFO *info) -{ - int i; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s rx_start()\n", - __FILE__,__LINE__, info->device_name ); - - write_reg(info, CMD, RXRESET); - - if ( info->params.mode == MGSL_MODE_HDLC ) { - /* HDLC, disabe IRQ on rxdata */ - info->ie0_value &= ~RXRDYE; - write_reg(info, IE0, info->ie0_value); - - /* Reset all Rx DMA buffers and program rx dma */ - write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ - write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ - - for (i = 0; i < info->rx_buf_count; i++) { - info->rx_buf_list[i].status = 0xff; - - // throttle to 4 shared memory writes at a time to prevent - // hogging local bus (keep latency time for DMA requests low). - if (!(i % 4)) - read_status_reg(info); - } - info->current_rx_buf = 0; - - /* set current/1st descriptor address */ - write_reg16(info, RXDMA + CDA, - info->rx_buf_list_ex[0].phys_entry); - - /* set new last rx descriptor address */ - write_reg16(info, RXDMA + EDA, - info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry); - - /* set buffer length (shared by all rx dma data buffers) */ - write_reg16(info, RXDMA + BFL, SCABUFSIZE); - - write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */ - write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */ - } else { - /* async, enable IRQ on rxdata */ - info->ie0_value |= RXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - write_reg(info, CMD, RXENABLE); - - info->rx_overflow = false; - info->rx_enabled = true; -} - -/* Enable the transmitter and send a transmit frame if - * one is loaded in the DMA buffers. - */ -static void tx_start(SLMP_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s tx_start() tx_count=%d\n", - __FILE__,__LINE__, info->device_name,info->tx_count ); - - if (!info->tx_enabled ) { - write_reg(info, CMD, TXRESET); - write_reg(info, CMD, TXENABLE); - info->tx_enabled = true; - } - - if ( info->tx_count ) { - - /* If auto RTS enabled and RTS is inactive, then assert */ - /* RTS and set a flag indicating that the driver should */ - /* negate RTS when the transmission completes. */ - - info->drop_rts_on_tx_done = false; - - if (info->params.mode != MGSL_MODE_ASYNC) { - - if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { - get_signals( info ); - if ( !(info->serial_signals & SerialSignal_RTS) ) { - info->serial_signals |= SerialSignal_RTS; - set_signals( info ); - info->drop_rts_on_tx_done = true; - } - } - - write_reg16(info, TRC0, - (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level)); - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - /* set TX CDA (current descriptor address) */ - write_reg16(info, TXDMA + CDA, - info->tx_buf_list_ex[0].phys_entry); - - /* set TX EDA (last descriptor address) */ - write_reg16(info, TXDMA + EDA, - info->tx_buf_list_ex[info->last_tx_buf].phys_entry); - - /* enable underrun IRQ */ - info->ie1_value &= ~IDLE; - info->ie1_value |= UDRN; - write_reg(info, IE1, info->ie1_value); - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); - - write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */ - write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */ - - mod_timer(&info->tx_timer, jiffies + - msecs_to_jiffies(5000)); - } - else { - tx_load_fifo(info); - /* async, enable IRQ on txdata */ - info->ie0_value |= TXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - info->tx_active = true; - } -} - -/* stop the transmitter and DMA - */ -static void tx_stop( SLMP_INFO *info ) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s tx_stop()\n", - __FILE__,__LINE__, info->device_name ); - - del_timer(&info->tx_timer); - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - write_reg(info, CMD, TXRESET); - - info->ie1_value &= ~(UDRN + IDLE); - write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ - - info->ie0_value &= ~TXRDYE; - write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */ - - info->tx_enabled = false; - info->tx_active = false; -} - -/* Fill the transmit FIFO until the FIFO is full or - * there is no more data to load. - */ -static void tx_load_fifo(SLMP_INFO *info) -{ - u8 TwoBytes[2]; - - /* do nothing is now tx data available and no XON/XOFF pending */ - - if ( !info->tx_count && !info->x_char ) - return; - - /* load the Transmit FIFO until FIFOs full or all data sent */ - - while( info->tx_count && (read_reg(info,SR0) & BIT1) ) { - - /* there is more space in the transmit FIFO and */ - /* there is more data in transmit buffer */ - - if ( (info->tx_count > 1) && !info->x_char ) { - /* write 16-bits */ - TwoBytes[0] = info->tx_buf[info->tx_get++]; - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - TwoBytes[1] = info->tx_buf[info->tx_get++]; - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - - write_reg16(info, TRB, *((u16 *)TwoBytes)); - - info->tx_count -= 2; - info->icount.tx += 2; - } else { - /* only 1 byte left to transmit or 1 FIFO slot left */ - - if (info->x_char) { - /* transmit pending high priority char */ - write_reg(info, TRB, info->x_char); - info->x_char = 0; - } else { - write_reg(info, TRB, info->tx_buf[info->tx_get++]); - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - info->tx_count--; - } - info->icount.tx++; - } - } -} - -/* Reset a port to a known state - */ -static void reset_port(SLMP_INFO *info) -{ - if (info->sca_base) { - - tx_stop(info); - rx_stop(info); - - info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - set_signals(info); - - /* disable all port interrupts */ - info->ie0_value = 0; - info->ie1_value = 0; - info->ie2_value = 0; - write_reg(info, IE0, info->ie0_value); - write_reg(info, IE1, info->ie1_value); - write_reg(info, IE2, info->ie2_value); - - write_reg(info, CMD, CHRESET); - } -} - -/* Reset all the ports to a known state. - */ -static void reset_adapter(SLMP_INFO *info) -{ - int i; - - for ( i=0; i < SCA_MAX_PORTS; ++i) { - if (info->port_array[i]) - reset_port(info->port_array[i]); - } -} - -/* Program port for asynchronous communications. - */ -static void async_mode(SLMP_INFO *info) -{ - - unsigned char RegValue; - - tx_stop(info); - rx_stop(info); - - /* MD0, Mode Register 0 - * - * 07..05 PRCTL<2..0>, Protocol Mode, 000=async - * 04 AUTO, Auto-enable (RTS/CTS/DCD) - * 03 Reserved, must be 0 - * 02 CRCCC, CRC Calculation, 0=disabled - * 01..00 STOP<1..0> Stop bits (00=1,10=2) - * - * 0000 0000 - */ - RegValue = 0x00; - if (info->params.stop_bits != 1) - RegValue |= BIT1; - write_reg(info, MD0, RegValue); - - /* MD1, Mode Register 1 - * - * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64 - * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5 - * 03..02 RXCHR<1..0>, rx char size - * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd - * - * 0100 0000 - */ - RegValue = 0x40; - switch (info->params.data_bits) { - case 7: RegValue |= BIT4 + BIT2; break; - case 6: RegValue |= BIT5 + BIT3; break; - case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break; - } - if (info->params.parity != ASYNC_PARITY_NONE) { - RegValue |= BIT1; - if (info->params.parity == ASYNC_PARITY_ODD) - RegValue |= BIT0; - } - write_reg(info, MD1, RegValue); - - /* MD2, Mode Register 2 - * - * 07..02 Reserved, must be 0 - * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback - * - * 0000 0000 - */ - RegValue = 0x00; - if (info->params.loopback) - RegValue |= (BIT1 + BIT0); - write_reg(info, MD2, RegValue); - - /* RXS, Receive clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=BIT6; - write_reg(info, RXS, RegValue); - - /* TXS, Transmit clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=BIT6; - write_reg(info, TXS, RegValue); - - /* Control Register - * - * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out - */ - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - write_control_reg(info); - - tx_set_idle(info); - - /* RRC Receive Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte - */ - write_reg(info, RRC, 0x00); - - /* TRC0 Transmit Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes - */ - write_reg(info, TRC0, 0x10); - - /* TRC1 Transmit Ready Control 1 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1) - */ - write_reg(info, TRC1, 0x1e); - - /* CTL, MSCI control register - * - * 07..06 Reserved, set to 0 - * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) - * 04 IDLC, idle control, 0=mark 1=idle register - * 03 BRK, break, 0=off 1 =on (async) - * 02 SYNCLD, sync char load enable (BSC) 1=enabled - * 01 GOP, go active on poll (LOOP mode) 1=enabled - * 00 RTS, RTS output control, 0=active 1=inactive - * - * 0001 0001 - */ - RegValue = 0x10; - if (!(info->serial_signals & SerialSignal_RTS)) - RegValue |= 0x01; - write_reg(info, CTL, RegValue); - - /* enable status interrupts */ - info->ie0_value |= TXINTE + RXINTE; - write_reg(info, IE0, info->ie0_value); - - /* enable break detect interrupt */ - info->ie1_value = BRKD; - write_reg(info, IE1, info->ie1_value); - - /* enable rx overrun interrupt */ - info->ie2_value = OVRN; - write_reg(info, IE2, info->ie2_value); - - set_rate( info, info->params.data_rate * 16 ); -} - -/* Program the SCA for HDLC communications. - */ -static void hdlc_mode(SLMP_INFO *info) -{ - unsigned char RegValue; - u32 DpllDivisor; - - // Can't use DPLL because SCA outputs recovered clock on RxC when - // DPLL mode selected. This causes output contention with RxC receiver. - // Use of DPLL would require external hardware to disable RxC receiver - // when DPLL mode selected. - info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL); - - /* disable DMA interrupts */ - write_reg(info, TXDMA + DIR, 0); - write_reg(info, RXDMA + DIR, 0); - - /* MD0, Mode Register 0 - * - * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC - * 04 AUTO, Auto-enable (RTS/CTS/DCD) - * 03 Reserved, must be 0 - * 02 CRCCC, CRC Calculation, 1=enabled - * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16 - * 00 CRC0, CRC initial value, 1 = all 1s - * - * 1000 0001 - */ - RegValue = 0x81; - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - RegValue |= BIT4; - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - RegValue |= BIT4; - if (info->params.crc_type == HDLC_CRC_16_CCITT) - RegValue |= BIT2 + BIT1; - write_reg(info, MD0, RegValue); - - /* MD1, Mode Register 1 - * - * 07..06 ADDRS<1..0>, Address detect, 00=no addr check - * 05..04 TXCHR<1..0>, tx char size, 00=8 bits - * 03..02 RXCHR<1..0>, rx char size, 00=8 bits - * 01..00 PMPM<1..0>, Parity mode, 00=no parity - * - * 0000 0000 - */ - RegValue = 0x00; - write_reg(info, MD1, RegValue); - - /* MD2, Mode Register 2 - * - * 07 NRZFM, 0=NRZ, 1=FM - * 06..05 CODE<1..0> Encoding, 00=NRZ - * 04..03 DRATE<1..0> DPLL Divisor, 00=8 - * 02 Reserved, must be 0 - * 01..00 CNCT<1..0> Channel connection, 0=normal - * - * 0000 0000 - */ - RegValue = 0x00; - switch(info->params.encoding) { - case HDLC_ENCODING_NRZI: RegValue |= BIT5; break; - case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */ - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */ - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */ -#if 0 - case HDLC_ENCODING_NRZB: /* not supported */ - case HDLC_ENCODING_NRZI_MARK: /* not supported */ - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */ -#endif - } - if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { - DpllDivisor = 16; - RegValue |= BIT3; - } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { - DpllDivisor = 8; - } else { - DpllDivisor = 32; - RegValue |= BIT4; - } - write_reg(info, MD2, RegValue); - - - /* RXS, Receive clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=0; - if (info->params.flags & HDLC_FLAG_RXC_BRG) - RegValue |= BIT6; - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - RegValue |= BIT6 + BIT5; - write_reg(info, RXS, RegValue); - - /* TXS, Transmit clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=0; - if (info->params.flags & HDLC_FLAG_TXC_BRG) - RegValue |= BIT6; - if (info->params.flags & HDLC_FLAG_TXC_DPLL) - RegValue |= BIT6 + BIT5; - write_reg(info, TXS, RegValue); - - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - set_rate(info, info->params.clock_speed * DpllDivisor); - else - set_rate(info, info->params.clock_speed); - - /* GPDATA (General Purpose I/O Data Register) - * - * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out - */ - if (info->params.flags & HDLC_FLAG_TXC_BRG) - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - else - info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2)); - write_control_reg(info); - - /* RRC Receive Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 RRC<4..0> Rx FIFO trigger active - */ - write_reg(info, RRC, rx_active_fifo_level); - - /* TRC0 Transmit Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger active - */ - write_reg(info, TRC0, tx_active_fifo_level); - - /* TRC1 Transmit Ready Control 1 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full) - */ - write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1)); - - /* DMR, DMA Mode Register - * - * 07..05 Reserved, must be 0 - * 04 TMOD, Transfer Mode: 1=chained-block - * 03 Reserved, must be 0 - * 02 NF, Number of Frames: 1=multi-frame - * 01 CNTE, Frame End IRQ Counter enable: 0=disabled - * 00 Reserved, must be 0 - * - * 0001 0100 - */ - write_reg(info, TXDMA + DMR, 0x14); - write_reg(info, RXDMA + DMR, 0x14); - - /* Set chain pointer base (upper 8 bits of 24 bit addr) */ - write_reg(info, RXDMA + CPB, - (unsigned char)(info->buffer_list_phys >> 16)); - - /* Set chain pointer base (upper 8 bits of 24 bit addr) */ - write_reg(info, TXDMA + CPB, - (unsigned char)(info->buffer_list_phys >> 16)); - - /* enable status interrupts. other code enables/disables - * the individual sources for these two interrupt classes. - */ - info->ie0_value |= TXINTE + RXINTE; - write_reg(info, IE0, info->ie0_value); - - /* CTL, MSCI control register - * - * 07..06 Reserved, set to 0 - * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) - * 04 IDLC, idle control, 0=mark 1=idle register - * 03 BRK, break, 0=off 1 =on (async) - * 02 SYNCLD, sync char load enable (BSC) 1=enabled - * 01 GOP, go active on poll (LOOP mode) 1=enabled - * 00 RTS, RTS output control, 0=active 1=inactive - * - * 0001 0001 - */ - RegValue = 0x10; - if (!(info->serial_signals & SerialSignal_RTS)) - RegValue |= 0x01; - write_reg(info, CTL, RegValue); - - /* preamble not supported ! */ - - tx_set_idle(info); - tx_stop(info); - rx_stop(info); - - set_rate(info, info->params.clock_speed); - - if (info->params.loopback) - enable_loopback(info,1); -} - -/* Set the transmit HDLC idle mode - */ -static void tx_set_idle(SLMP_INFO *info) -{ - unsigned char RegValue = 0xff; - - /* Map API idle mode to SCA register bits */ - switch(info->idle_mode) { - case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break; - case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break; - case HDLC_TXIDLE_ONES: RegValue = 0xff; break; - case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break; - case HDLC_TXIDLE_SPACE: RegValue = 0x00; break; - case HDLC_TXIDLE_MARK: RegValue = 0xff; break; - } - - write_reg(info, IDL, RegValue); -} - -/* Query the adapter for the state of the V24 status (input) signals. - */ -static void get_signals(SLMP_INFO *info) -{ - u16 status = read_reg(info, SR3); - u16 gpstatus = read_status_reg(info); - u16 testbit; - - /* clear all serial signals except DTR and RTS */ - info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; - - /* set serial signal bits to reflect MISR */ - - if (!(status & BIT3)) - info->serial_signals |= SerialSignal_CTS; - - if ( !(status & BIT2)) - info->serial_signals |= SerialSignal_DCD; - - testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7> - if (!(gpstatus & testbit)) - info->serial_signals |= SerialSignal_RI; - - testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6> - if (!(gpstatus & testbit)) - info->serial_signals |= SerialSignal_DSR; -} - -/* Set the state of DTR and RTS based on contents of - * serial_signals member of device context. - */ -static void set_signals(SLMP_INFO *info) -{ - unsigned char RegValue; - u16 EnableBit; - - RegValue = read_reg(info, CTL); - if (info->serial_signals & SerialSignal_RTS) - RegValue &= ~BIT0; - else - RegValue |= BIT0; - write_reg(info, CTL, RegValue); - - // Port 0..3 DTR is ctrl reg <1,3,5,7> - EnableBit = BIT1 << (info->port_num*2); - if (info->serial_signals & SerialSignal_DTR) - info->port_array[0]->ctrlreg_value &= ~EnableBit; - else - info->port_array[0]->ctrlreg_value |= EnableBit; - write_control_reg(info); -} - -/*******************/ -/* DMA Buffer Code */ -/*******************/ - -/* Set the count for all receive buffers to SCABUFSIZE - * and set the current buffer to the first buffer. This effectively - * makes all buffers free and discards any data in buffers. - */ -static void rx_reset_buffers(SLMP_INFO *info) -{ - rx_free_frame_buffers(info, 0, info->rx_buf_count - 1); -} - -/* Free the buffers used by a received frame - * - * info pointer to device instance data - * first index of 1st receive buffer of frame - * last index of last receive buffer of frame - */ -static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) -{ - bool done = false; - - while(!done) { - /* reset current buffer for reuse */ - info->rx_buf_list[first].status = 0xff; - - if (first == last) { - done = true; - /* set new last rx descriptor address */ - write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry); - } - - first++; - if (first == info->rx_buf_count) - first = 0; - } - - /* set current buffer to next buffer after last buffer of frame */ - info->current_rx_buf = first; -} - -/* Return a received frame from the receive DMA buffers. - * Only frames received without errors are returned. - * - * Return Value: true if frame returned, otherwise false - */ -static bool rx_get_frame(SLMP_INFO *info) -{ - unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ - unsigned short status; - unsigned int framesize = 0; - bool ReturnCode = false; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - unsigned char addr_field = 0xff; - SCADESC *desc; - SCADESC_EX *desc_ex; - -CheckAgain: - /* assume no frame returned, set zero length */ - framesize = 0; - addr_field = 0xff; - - /* - * current_rx_buf points to the 1st buffer of the next available - * receive frame. To find the last buffer of the frame look for - * a non-zero status field in the buffer entries. (The status - * field is set by the 16C32 after completing a receive frame. - */ - StartIndex = EndIndex = info->current_rx_buf; - - for ( ;; ) { - desc = &info->rx_buf_list[EndIndex]; - desc_ex = &info->rx_buf_list_ex[EndIndex]; - - if (desc->status == 0xff) - goto Cleanup; /* current desc still in use, no frames available */ - - if (framesize == 0 && info->params.addr_filter != 0xff) - addr_field = desc_ex->virt_addr[0]; - - framesize += desc->length; - - /* Status != 0 means last buffer of frame */ - if (desc->status) - break; - - EndIndex++; - if (EndIndex == info->rx_buf_count) - EndIndex = 0; - - if (EndIndex == info->current_rx_buf) { - /* all buffers have been 'used' but none mark */ - /* the end of a frame. Reset buffers and receiver. */ - if ( info->rx_enabled ){ - spin_lock_irqsave(&info->lock,flags); - rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - goto Cleanup; - } - - } - - /* check status of receive frame */ - - /* frame status is byte stored after frame data - * - * 7 EOM (end of msg), 1 = last buffer of frame - * 6 Short Frame, 1 = short frame - * 5 Abort, 1 = frame aborted - * 4 Residue, 1 = last byte is partial - * 3 Overrun, 1 = overrun occurred during frame reception - * 2 CRC, 1 = CRC error detected - * - */ - status = desc->status; - - /* ignore CRC bit if not using CRC (bit is undefined) */ - /* Note:CRC is not save to data buffer */ - if (info->params.crc_type == HDLC_CRC_NONE) - status &= ~BIT2; - - if (framesize == 0 || - (addr_field != 0xff && addr_field != info->params.addr_filter)) { - /* discard 0 byte frames, this seems to occur sometime - * when remote is idling flags. - */ - rx_free_frame_buffers(info, StartIndex, EndIndex); - goto CheckAgain; - } - - if (framesize < 2) - status |= BIT6; - - if (status & (BIT6+BIT5+BIT3+BIT2)) { - /* received frame has errors, - * update counts and mark frame size as 0 - */ - if (status & BIT6) - info->icount.rxshort++; - else if (status & BIT5) - info->icount.rxabort++; - else if (status & BIT3) - info->icount.rxover++; - else - info->icount.rxcrc++; - - framesize = 0; -#if SYNCLINK_GENERIC_HDLC - { - info->netdev->stats.rx_errors++; - info->netdev->stats.rx_frame_errors++; - } -#endif - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n", - __FILE__,__LINE__,info->device_name,status,framesize); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr, - min_t(int, framesize,SCABUFSIZE),0); - - if (framesize) { - if (framesize > info->max_frame_size) - info->icount.rxlong++; - else { - /* copy dma buffer(s) to contiguous intermediate buffer */ - int copy_count = framesize; - int index = StartIndex; - unsigned char *ptmp = info->tmp_rx_buf; - info->tmp_rx_buf_count = framesize; - - info->icount.rxok++; - - while(copy_count) { - int partial_count = min(copy_count,SCABUFSIZE); - memcpy( ptmp, - info->rx_buf_list_ex[index].virt_addr, - partial_count ); - ptmp += partial_count; - copy_count -= partial_count; - - if ( ++index == info->rx_buf_count ) - index = 0; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_rx(info,info->tmp_rx_buf,framesize); - else -#endif - ldisc_receive_buf(tty,info->tmp_rx_buf, - info->flag_buf, framesize); - } - } - /* Free the buffers used by this frame. */ - rx_free_frame_buffers( info, StartIndex, EndIndex ); - - ReturnCode = true; - -Cleanup: - if ( info->rx_enabled && info->rx_overflow ) { - /* Receiver is enabled, but needs to restarted due to - * rx buffer overflow. If buffers are empty, restart receiver. - */ - if (info->rx_buf_list[EndIndex].status == 0xff) { - spin_lock_irqsave(&info->lock,flags); - rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - } - - return ReturnCode; -} - -/* load the transmit DMA buffer with data - */ -static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) -{ - unsigned short copy_count; - unsigned int i = 0; - SCADESC *desc; - SCADESC_EX *desc_ex; - - if ( debug_level >= DEBUG_LEVEL_DATA ) - trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1); - - /* Copy source buffer to one or more DMA buffers, starting with - * the first transmit dma buffer. - */ - for(i=0;;) - { - copy_count = min_t(unsigned short,count,SCABUFSIZE); - - desc = &info->tx_buf_list[i]; - desc_ex = &info->tx_buf_list_ex[i]; - - load_pci_memory(info, desc_ex->virt_addr,buf,copy_count); - - desc->length = copy_count; - desc->status = 0; - - buf += copy_count; - count -= copy_count; - - if (!count) - break; - - i++; - if (i >= info->tx_buf_count) - i = 0; - } - - info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */ - info->last_tx_buf = ++i; -} - -static bool register_test(SLMP_INFO *info) -{ - static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96}; - static unsigned int count = ARRAY_SIZE(testval); - unsigned int i; - bool rc = true; - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - - /* assume failure */ - info->init_error = DiagStatus_AddressFailure; - - /* Write bit patterns to various registers but do it out of */ - /* sync, then read back and verify values. */ - - for (i = 0 ; i < count ; i++) { - write_reg(info, TMC, testval[i]); - write_reg(info, IDL, testval[(i+1)%count]); - write_reg(info, SA0, testval[(i+2)%count]); - write_reg(info, SA1, testval[(i+3)%count]); - - if ( (read_reg(info, TMC) != testval[i]) || - (read_reg(info, IDL) != testval[(i+1)%count]) || - (read_reg(info, SA0) != testval[(i+2)%count]) || - (read_reg(info, SA1) != testval[(i+3)%count]) ) - { - rc = false; - break; - } - } - - reset_port(info); - spin_unlock_irqrestore(&info->lock,flags); - - return rc; -} - -static bool irq_test(SLMP_INFO *info) -{ - unsigned long timeout; - unsigned long flags; - - unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - - /* assume failure */ - info->init_error = DiagStatus_IrqFailure; - info->irq_occurred = false; - - /* setup timer0 on SCA0 to interrupt */ - - /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */ - write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4)); - - write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */ - write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */ - - - /* TMCS, Timer Control/Status Register - * - * 07 CMF, Compare match flag (read only) 1=match - * 06 ECMI, CMF Interrupt Enable: 1=enabled - * 05 Reserved, must be 0 - * 04 TME, Timer Enable - * 03..00 Reserved, must be 0 - * - * 0101 0000 - */ - write_reg(info, (unsigned char)(timer + TMCS), 0x50); - - spin_unlock_irqrestore(&info->lock,flags); - - timeout=100; - while( timeout-- && !info->irq_occurred ) { - msleep_interruptible(10); - } - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - spin_unlock_irqrestore(&info->lock,flags); - - return info->irq_occurred; -} - -/* initialize individual SCA device (2 ports) - */ -static bool sca_init(SLMP_INFO *info) -{ - /* set wait controller to single mem partition (low), no wait states */ - write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */ - write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */ - write_reg(info, WCRL, 0); /* wait controller low range */ - write_reg(info, WCRM, 0); /* wait controller mid range */ - write_reg(info, WCRH, 0); /* wait controller high range */ - - /* DPCR, DMA Priority Control - * - * 07..05 Not used, must be 0 - * 04 BRC, bus release condition: 0=all transfers complete - * 03 CCC, channel change condition: 0=every cycle - * 02..00 PR<2..0>, priority 100=round robin - * - * 00000100 = 0x04 - */ - write_reg(info, DPCR, dma_priority); - - /* DMA Master Enable, BIT7: 1=enable all channels */ - write_reg(info, DMER, 0x80); - - /* enable all interrupt classes */ - write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */ - write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */ - write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */ - - /* ITCR, interrupt control register - * 07 IPC, interrupt priority, 0=MSCI->DMA - * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle - * 04 VOS, Vector Output, 0=unmodified vector - * 03..00 Reserved, must be 0 - */ - write_reg(info, ITCR, 0); - - return true; -} - -/* initialize adapter hardware - */ -static bool init_adapter(SLMP_INFO *info) -{ - int i; - - /* Set BIT30 of Local Control Reg 0x50 to reset SCA */ - volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); - u32 readval; - - info->misc_ctrl_value |= BIT30; - *MiscCtrl = info->misc_ctrl_value; - - /* - * Force at least 170ns delay before clearing - * reset bit. Each read from LCR takes at least - * 30ns so 10 times for 300ns to be safe. - */ - for(i=0;i<10;i++) - readval = *MiscCtrl; - - info->misc_ctrl_value &= ~BIT30; - *MiscCtrl = info->misc_ctrl_value; - - /* init control reg (all DTRs off, all clksel=input) */ - info->ctrlreg_value = 0xaa; - write_control_reg(info); - - { - volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c); - lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3); - - switch(read_ahead_count) - { - case 16: - lcr1_brdr_value |= BIT5 + BIT4 + BIT3; - break; - case 8: - lcr1_brdr_value |= BIT5 + BIT4; - break; - case 4: - lcr1_brdr_value |= BIT5 + BIT3; - break; - case 0: - lcr1_brdr_value |= BIT5; - break; - } - - *LCR1BRDR = lcr1_brdr_value; - *MiscCtrl = misc_ctrl_value; - } - - sca_init(info->port_array[0]); - sca_init(info->port_array[2]); - - return true; -} - -/* Loopback an HDLC frame to test the hardware - * interrupt and DMA functions. - */ -static bool loopback_test(SLMP_INFO *info) -{ -#define TESTFRAMESIZE 20 - - unsigned long timeout; - u16 count = TESTFRAMESIZE; - unsigned char buf[TESTFRAMESIZE]; - bool rc = false; - unsigned long flags; - - struct tty_struct *oldtty = info->port.tty; - u32 speed = info->params.clock_speed; - - info->params.clock_speed = 3686400; - info->port.tty = NULL; - - /* assume failure */ - info->init_error = DiagStatus_DmaFailure; - - /* build and send transmit frame */ - for (count = 0; count < TESTFRAMESIZE;++count) - buf[count] = (unsigned char)count; - - memset(info->tmp_rx_buf,0,TESTFRAMESIZE); - - /* program hardware for HDLC and enabled receiver */ - spin_lock_irqsave(&info->lock,flags); - hdlc_mode(info); - enable_loopback(info,1); - rx_start(info); - info->tx_count = count; - tx_load_dma_buffer(info,buf,count); - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - - /* wait for receive complete */ - /* Set a timeout for waiting for interrupt. */ - for ( timeout = 100; timeout; --timeout ) { - msleep_interruptible(10); - - if (rx_get_frame(info)) { - rc = true; - break; - } - } - - /* verify received frame length and contents */ - if (rc && - ( info->tmp_rx_buf_count != count || - memcmp(buf, info->tmp_rx_buf,count))) { - rc = false; - } - - spin_lock_irqsave(&info->lock,flags); - reset_adapter(info); - spin_unlock_irqrestore(&info->lock,flags); - - info->params.clock_speed = speed; - info->port.tty = oldtty; - - return rc; -} - -/* Perform diagnostics on hardware - */ -static int adapter_test( SLMP_INFO *info ) -{ - unsigned long flags; - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):Testing device %s\n", - __FILE__,__LINE__,info->device_name ); - - spin_lock_irqsave(&info->lock,flags); - init_adapter(info); - spin_unlock_irqrestore(&info->lock,flags); - - info->port_array[0]->port_count = 0; - - if ( register_test(info->port_array[0]) && - register_test(info->port_array[1])) { - - info->port_array[0]->port_count = 2; - - if ( register_test(info->port_array[2]) && - register_test(info->port_array[3]) ) - info->port_array[0]->port_count += 2; - } - else { - printk( "%s(%d):Register test failure for device %s Addr=%08lX\n", - __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base)); - return -ENODEV; - } - - if ( !irq_test(info->port_array[0]) || - !irq_test(info->port_array[1]) || - (info->port_count == 4 && !irq_test(info->port_array[2])) || - (info->port_count == 4 && !irq_test(info->port_array[3]))) { - printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); - return -ENODEV; - } - - if (!loopback_test(info->port_array[0]) || - !loopback_test(info->port_array[1]) || - (info->port_count == 4 && !loopback_test(info->port_array[2])) || - (info->port_count == 4 && !loopback_test(info->port_array[3]))) { - printk( "%s(%d):DMA test failure for device %s\n", - __FILE__,__LINE__,info->device_name); - return -ENODEV; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):device %s passed diagnostics\n", - __FILE__,__LINE__,info->device_name ); - - info->port_array[0]->init_error = 0; - info->port_array[1]->init_error = 0; - if ( info->port_count > 2 ) { - info->port_array[2]->init_error = 0; - info->port_array[3]->init_error = 0; - } - - return 0; -} - -/* Test the shared memory on a PCI adapter. - */ -static bool memory_test(SLMP_INFO *info) -{ - static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa, - 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; - unsigned long count = ARRAY_SIZE(testval); - unsigned long i; - unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long); - unsigned long * addr = (unsigned long *)info->memory_base; - - /* Test data lines with test pattern at one location. */ - - for ( i = 0 ; i < count ; i++ ) { - *addr = testval[i]; - if ( *addr != testval[i] ) - return false; - } - - /* Test address lines with incrementing pattern over */ - /* entire address range. */ - - for ( i = 0 ; i < limit ; i++ ) { - *addr = i * 4; - addr++; - } - - addr = (unsigned long *)info->memory_base; - - for ( i = 0 ; i < limit ; i++ ) { - if ( *addr != i * 4 ) - return false; - addr++; - } - - memset( info->memory_base, 0, SCA_MEM_SIZE ); - return true; -} - -/* Load data into PCI adapter shared memory. - * - * The PCI9050 releases control of the local bus - * after completing the current read or write operation. - * - * While the PCI9050 write FIFO not empty, the - * PCI9050 treats all of the writes as a single transaction - * and does not release the bus. This causes DMA latency problems - * at high speeds when copying large data blocks to the shared memory. - * - * This function breaks a write into multiple transations by - * interleaving a read which flushes the write FIFO and 'completes' - * the write transation. This allows any pending DMA request to gain control - * of the local bus in a timely fasion. - */ -static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) -{ - /* A load interval of 16 allows for 4 32-bit writes at */ - /* 136ns each for a maximum latency of 542ns on the local bus.*/ - - unsigned short interval = count / sca_pci_load_interval; - unsigned short i; - - for ( i = 0 ; i < interval ; i++ ) - { - memcpy(dest, src, sca_pci_load_interval); - read_status_reg(info); - dest += sca_pci_load_interval; - src += sca_pci_load_interval; - } - - memcpy(dest, src, count % sca_pci_load_interval); -} - -static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) -{ - int i; - int linecount; - if (xmit) - printk("%s tx data:\n",info->device_name); - else - printk("%s rx data:\n",info->device_name); - - while(count) { - if (count > 16) - linecount = 16; - else - linecount = count; - - for(i=0;i=040 && data[i]<=0176) - printk("%c",data[i]); - else - printk("."); - } - printk("\n"); - - data += linecount; - count -= linecount; - } -} /* end of trace_block() */ - -/* called when HDLC frame times out - * update stats and do tx completion processing - */ -static void tx_timeout(unsigned long context) -{ - SLMP_INFO *info = (SLMP_INFO*)context; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s tx_timeout()\n", - __FILE__,__LINE__,info->device_name); - if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { - info->icount.txtimeout++; - } - spin_lock_irqsave(&info->lock,flags); - info->tx_active = false; - info->tx_count = info->tx_put = info->tx_get = 0; - - spin_unlock_irqrestore(&info->lock,flags); - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - bh_transmit(info); -} - -/* called to periodically check the DSR/RI modem signal input status - */ -static void status_timeout(unsigned long context) -{ - u16 status = 0; - SLMP_INFO *info = (SLMP_INFO*)context; - unsigned long flags; - unsigned char delta; - - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - /* check for DSR/RI state change */ - - delta = info->old_signals ^ info->serial_signals; - info->old_signals = info->serial_signals; - - if (delta & SerialSignal_DSR) - status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR); - - if (delta & SerialSignal_RI) - status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI); - - if (delta & SerialSignal_DCD) - status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD); - - if (delta & SerialSignal_CTS) - status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS); - - if (status) - isr_io_pin(info,status); - - mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); -} - - -/* Register Access Routines - - * All registers are memory mapped - */ -#define CALC_REGADDR() \ - unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \ - if (info->port_num > 1) \ - RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \ - if ( info->port_num & 1) { \ - if (Addr > 0x7f) \ - RegAddr += 0x40; /* DMA access */ \ - else if (Addr > 0x1f && Addr < 0x60) \ - RegAddr += 0x20; /* MSCI access */ \ - } - - -static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) -{ - CALC_REGADDR(); - return *RegAddr; -} -static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) -{ - CALC_REGADDR(); - *RegAddr = Value; -} - -static u16 read_reg16(SLMP_INFO * info, unsigned char Addr) -{ - CALC_REGADDR(); - return *((u16 *)RegAddr); -} - -static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) -{ - CALC_REGADDR(); - *((u16 *)RegAddr) = Value; -} - -static unsigned char read_status_reg(SLMP_INFO * info) -{ - unsigned char *RegAddr = (unsigned char *)info->statctrl_base; - return *RegAddr; -} - -static void write_control_reg(SLMP_INFO * info) -{ - unsigned char *RegAddr = (unsigned char *)info->statctrl_base; - *RegAddr = info->port_array[0]->ctrlreg_value; -} - - -static int __devinit synclinkmp_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) -{ - if (pci_enable_device(dev)) { - printk("error enabling pci device %p\n", dev); - return -EIO; - } - device_init( ++synclinkmp_adapter_count, dev ); - return 0; -} - -static void __devexit synclinkmp_remove_one (struct pci_dev *dev) -{ -} diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 9cfbdb318ed9..3fd7199301b6 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -147,4 +147,175 @@ config LEGACY_PTY_COUNT When not in use, each legacy PTY occupies 12 bytes on 32-bit architectures and 24 bytes on 64-bit architectures. +config BFIN_JTAG_COMM + tristate "Blackfin JTAG Communication" + depends on BLACKFIN + help + Add support for emulating a TTY device over the Blackfin JTAG. + + To compile this driver as a module, choose M here: the + module will be called bfin_jtag_comm. + +config BFIN_JTAG_COMM_CONSOLE + bool "Console on Blackfin JTAG" + depends on BFIN_JTAG_COMM=y + +config SERIAL_NONSTANDARD + bool "Non-standard serial port support" + depends on HAS_IOMEM + ---help--- + Say Y here if you have any non-standard serial boards -- boards + which aren't supported using the standard "dumb" serial driver. + This includes intelligent serial boards such as Cyclades, + Digiboards, etc. These are usually used for systems that need many + serial ports because they serve many terminals or dial-in + connections. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about non-standard serial boards. + + Most people can say N here. + +config ROCKETPORT + tristate "Comtrol RocketPort support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + help + This driver supports Comtrol RocketPort and RocketModem PCI boards. + These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or + modems. For information about the RocketPort/RocketModem boards + and this driver read . + + To compile this driver as a module, choose M here: the + module will be called rocket. + + If you want to compile this driver into the kernel, say Y here. If + you don't have a Comtrol RocketPort/RocketModem card installed, say N. + +config CYCLADES + tristate "Cyclades async mux support" + depends on SERIAL_NONSTANDARD && (PCI || ISA) + select FW_LOADER + ---help--- + This driver supports Cyclades Z and Y multiserial boards. + You would need something like this to connect more than two modems to + your Linux box, for instance in order to become a dial-in server. + + For information about the Cyclades-Z card, read + . + + To compile this driver as a module, choose M here: the + module will be called cyclades. + + If you haven't heard about it, it's safe to say N. + +config CYZ_INTR + bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)" + depends on EXPERIMENTAL && CYCLADES + help + The Cyclades-Z family of multiport cards allows 2 (two) driver op + modes: polling and interrupt. In polling mode, the driver will check + the status of the Cyclades-Z ports every certain amount of time + (which is called polling cycle and is configurable). In interrupt + mode, it will use an interrupt line (IRQ) in order to check the + status of the Cyclades-Z ports. The default op mode is polling. If + unsure, say N. + +config MOXA_INTELLIO + tristate "Moxa Intellio support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + select FW_LOADER + help + Say Y here if you have a Moxa Intellio multiport serial card. + + To compile this driver as a module, choose M here: the + module will be called moxa. + +config MOXA_SMARTIO + tristate "Moxa SmartIO support v. 2.0" + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) + help + Say Y here if you have a Moxa SmartIO multiport serial card and/or + want to help develop a new version of this driver. + + This is upgraded (1.9.1) driver from original Moxa drivers with + changes finally resulting in PCI probing. + + This driver can also be built as a module. The module will be called + mxser. If you want to do that, say M here. + +config SYNCLINK + tristate "Microgate SyncLink card support" + depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API + help + Provides support for the SyncLink ISA and PCI multiprotocol serial + adapters. These adapters support asynchronous and HDLC bit + synchronous communication up to 10Mbps (PCI adapter). + + This driver can only be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called synclink. If you want to do that, say M + here. + +config SYNCLINKMP + tristate "SyncLink Multiport support" + depends on SERIAL_NONSTANDARD && PCI + help + Enable support for the SyncLink Multiport (2 or 4 ports) + serial adapter, running asynchronous and HDLC communications up + to 2.048Mbps. Each ports is independently selectable for + RS-232, V.35, RS-449, RS-530, and X.21 + + This driver may be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called synclinkmp. If you want to do that, say M + here. + +config SYNCLINK_GT + tristate "SyncLink GT/AC support" + depends on SERIAL_NONSTANDARD && PCI + help + Support for SyncLink GT and SyncLink AC families of + synchronous and asynchronous serial adapters + manufactured by Microgate Systems, Ltd. (www.microgate.com) + +config NOZOMI + tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" + depends on PCI && EXPERIMENTAL + help + If you have a HSDPA driver Broadband Wireless Data Card - + Globe Trotter PCMCIA card, say Y here. + + To compile this driver as a module, choose M here, the module + will be called nozomi. + +config ISI + tristate "Multi-Tech multiport card support (EXPERIMENTAL)" + depends on SERIAL_NONSTANDARD && PCI + select FW_LOADER + help + This is a driver for the Multi-Tech cards which provide several + serial ports. The driver is experimental and can currently only be + built as a module. The module will be called isicom. + If you want to do that, choose M here. + +config N_HDLC + tristate "HDLC line discipline support" + depends on SERIAL_NONSTANDARD + help + Allows synchronous HDLC communications with tty device drivers that + support synchronous HDLC such as the Microgate SyncLink adapter. + + This driver can be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called n_hdlc. If you want to do that, say M + here. + +config N_GSM + tristate "GSM MUX line discipline support (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on NET + help + This line discipline provides support for the GSM MUX protocol and + presents the mux as a set of 61 individual tty devices. diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 396277216e4f..e549da348a04 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -11,3 +11,16 @@ obj-$(CONFIG_R3964) += n_r3964.o obj-y += vt/ obj-$(CONFIG_HVC_DRIVER) += hvc/ obj-y += serial/ + +# tty drivers +obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o +obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o +obj-$(CONFIG_CYCLADES) += cyclades.o +obj-$(CONFIG_ISI) += isicom.o +obj-$(CONFIG_MOXA_INTELLIO) += moxa.o +obj-$(CONFIG_MOXA_SMARTIO) += mxser.o +obj-$(CONFIG_NOZOMI) += nozomi.o +obj-$(CONFIG_ROCKETPORT) += rocket.o +obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o +obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o +obj-$(CONFIG_SYNCLINK) += synclink.o diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c new file mode 100644 index 000000000000..f214e5022472 --- /dev/null +++ b/drivers/tty/amiserial.c @@ -0,0 +1,2178 @@ +/* + * linux/drivers/char/amiserial.c + * + * Serial driver for the amiga builtin port. + * + * This code was created by taking serial.c version 4.30 from kernel + * release 2.3.22, replacing all hardware related stuff with the + * corresponding amiga hardware actions, and removing all irrelevant + * code. As a consequence, it uses many of the constants and names + * associated with the registers and bits of 16550 compatible UARTS - + * but only to keep track of status, etc in the state variables. It + * was done this was to make it easier to keep the code in line with + * (non hardware specific) changes to serial.c. + * + * The port is registered with the tty driver as minor device 64, and + * therefore other ports should should only use 65 upwards. + * + * Richard Lucock 28/12/99 + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, + * 1998, 1999 Theodore Ts'o + * + */ + +/* + * Serial driver configuration section. Here are the various options: + * + * SERIAL_PARANOIA_CHECK + * Check the magic number for the async_structure where + * ever possible. + */ + +#include + +#undef SERIAL_PARANOIA_CHECK +#define SERIAL_DO_RESTART + +/* Set of debugging defines */ + +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW +#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + +/* Sanity checks */ + +#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) +#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ + tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s) +#else +#define DBG_CNT(s) +#endif + +/* + * End of serial driver configuration section. + */ + +#include + +#include +#include +#include +#include +static char *serial_version = "4.30"; + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include + +#include +#include + +#define custom amiga_custom +static char *serial_name = "Amiga-builtin serial driver"; + +static struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +static struct async_struct *IRQ_ports; + +static unsigned char current_ctl_bits; + +static void change_speed(struct async_struct *info, struct ktermios *old); +static void rs_wait_until_sent(struct tty_struct *tty, int timeout); + + +static struct serial_state rs_table[1]; + +#define NR_PORTS ARRAY_SIZE(rs_table) + +#include + +#define serial_isroot() (capable(CAP_SYS_ADMIN)) + + +static inline int serial_paranoia_check(struct async_struct *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null async_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* some serial hardware definitions */ +#define SDR_OVRUN (1<<15) +#define SDR_RBF (1<<14) +#define SDR_TBE (1<<13) +#define SDR_TSRE (1<<12) + +#define SERPER_PARENB (1<<15) + +#define AC_SETCLR (1<<15) +#define AC_UARTBRK (1<<11) + +#define SER_DTR (1<<7) +#define SER_RTS (1<<6) +#define SER_DCD (1<<5) +#define SER_CTS (1<<4) +#define SER_DSR (1<<3) + +static __inline__ void rtsdtr_ctrl(int bits) +{ + ciab.pra = ((bits & (SER_RTS | SER_DTR)) ^ (SER_RTS | SER_DTR)) | (ciab.pra & ~(SER_RTS | SER_DTR)); +} + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ + struct async_struct *info = tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + if (info->IER & UART_IER_THRI) { + info->IER &= ~UART_IER_THRI; + /* disable Tx interrupt and remove any pending interrupts */ + custom.intena = IF_TBE; + mb(); + custom.intreq = IF_TBE; + mb(); + } + local_irq_restore(flags); +} + +static void rs_start(struct tty_struct *tty) +{ + struct async_struct *info = tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_start")) + return; + + local_irq_save(flags); + if (info->xmit.head != info->xmit.tail + && info->xmit.buf + && !(info->IER & UART_IER_THRI)) { + info->IER |= UART_IER_THRI; + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + } + local_irq_restore(flags); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver. + */ +static void rs_sched_event(struct async_struct *info, + int event) +{ + info->event |= 1 << event; + tasklet_schedule(&info->tlet); +} + +static void receive_chars(struct async_struct *info) +{ + int status; + int serdatr; + struct tty_struct *tty = info->tty; + unsigned char ch, flag; + struct async_icount *icount; + int oe = 0; + + icount = &info->state->icount; + + status = UART_LSR_DR; /* We obviously have a character! */ + serdatr = custom.serdatr; + mb(); + custom.intreq = IF_RBF; + mb(); + + if((serdatr & 0x1ff) == 0) + status |= UART_LSR_BI; + if(serdatr & SDR_OVRUN) + status |= UART_LSR_OE; + + ch = serdatr & 0xff; + icount->rx++; + +#ifdef SERIAL_DEBUG_INTR + printk("DR%02x:%02x...", ch, status); +#endif + flag = TTY_NORMAL; + + /* + * We don't handle parity or frame errors - but I have left + * the code in, since I'm not sure that the errors can't be + * detected. + */ + + if (status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE)) { + /* + * For statistics only + */ + if (status & UART_LSR_BI) { + status &= ~(UART_LSR_FE | UART_LSR_PE); + icount->brk++; + } else if (status & UART_LSR_PE) + icount->parity++; + else if (status & UART_LSR_FE) + icount->frame++; + if (status & UART_LSR_OE) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + */ + if (status & info->ignore_status_mask) + goto out; + + status &= info->read_status_mask; + + if (status & (UART_LSR_BI)) { +#ifdef SERIAL_DEBUG_INTR + printk("handling break...."); +#endif + flag = TTY_BREAK; + if (info->flags & ASYNC_SAK) + do_SAK(tty); + } else if (status & UART_LSR_PE) + flag = TTY_PARITY; + else if (status & UART_LSR_FE) + flag = TTY_FRAME; + if (status & UART_LSR_OE) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + oe = 1; + } + } + tty_insert_flip_char(tty, ch, flag); + if (oe == 1) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_flip_buffer_push(tty); +out: + return; +} + +static void transmit_chars(struct async_struct *info) +{ + custom.intreq = IF_TBE; + mb(); + if (info->x_char) { + custom.serdat = info->x_char | 0x100; + mb(); + info->state->icount.tx++; + info->x_char = 0; + return; + } + if (info->xmit.head == info->xmit.tail + || info->tty->stopped + || info->tty->hw_stopped) { + info->IER &= ~UART_IER_THRI; + custom.intena = IF_TBE; + mb(); + return; + } + + custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100; + mb(); + info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1); + info->state->icount.tx++; + + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) < WAKEUP_CHARS) + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + +#ifdef SERIAL_DEBUG_INTR + printk("THRE..."); +#endif + if (info->xmit.head == info->xmit.tail) { + custom.intena = IF_TBE; + mb(); + info->IER &= ~UART_IER_THRI; + } +} + +static void check_modem_status(struct async_struct *info) +{ + unsigned char status = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); + unsigned char dstatus; + struct async_icount *icount; + + /* Determine bits that have changed */ + dstatus = status ^ current_ctl_bits; + current_ctl_bits = status; + + if (dstatus) { + icount = &info->state->icount; + /* update input line counters */ + if (dstatus & SER_DSR) + icount->dsr++; + if (dstatus & SER_DCD) { + icount->dcd++; +#ifdef CONFIG_HARD_PPS + if ((info->flags & ASYNC_HARDPPS_CD) && + !(status & SER_DCD)) + hardpps(); +#endif + } + if (dstatus & SER_CTS) + icount->cts++; + wake_up_interruptible(&info->delta_msr_wait); + } + + if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) { +#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) + printk("ttyS%d CD now %s...", info->line, + (!(status & SER_DCD)) ? "on" : "off"); +#endif + if (!(status & SER_DCD)) + wake_up_interruptible(&info->open_wait); + else { +#ifdef SERIAL_DEBUG_OPEN + printk("doing serial hangup..."); +#endif + if (info->tty) + tty_hangup(info->tty); + } + } + if (info->flags & ASYNC_CTS_FLOW) { + if (info->tty->hw_stopped) { + if (!(status & SER_CTS)) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx start..."); +#endif + info->tty->hw_stopped = 0; + info->IER |= UART_IER_THRI; + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + return; + } + } else { + if ((status & SER_CTS)) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx stop..."); +#endif + info->tty->hw_stopped = 1; + info->IER &= ~UART_IER_THRI; + /* disable Tx interrupt and remove any pending interrupts */ + custom.intena = IF_TBE; + mb(); + custom.intreq = IF_TBE; + mb(); + } + } + } +} + +static irqreturn_t ser_vbl_int( int irq, void *data) +{ + /* vbl is just a periodic interrupt we tie into to update modem status */ + struct async_struct * info = IRQ_ports; + /* + * TBD - is it better to unregister from this interrupt or to + * ignore it if MSI is clear ? + */ + if(info->IER & UART_IER_MSI) + check_modem_status(info); + return IRQ_HANDLED; +} + +static irqreturn_t ser_rx_int(int irq, void *dev_id) +{ + struct async_struct * info; + +#ifdef SERIAL_DEBUG_INTR + printk("ser_rx_int..."); +#endif + + info = IRQ_ports; + if (!info || !info->tty) + return IRQ_NONE; + + receive_chars(info); + info->last_active = jiffies; +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif + return IRQ_HANDLED; +} + +static irqreturn_t ser_tx_int(int irq, void *dev_id) +{ + struct async_struct * info; + + if (custom.serdatr & SDR_TBE) { +#ifdef SERIAL_DEBUG_INTR + printk("ser_tx_int..."); +#endif + + info = IRQ_ports; + if (!info || !info->tty) + return IRQ_NONE; + + transmit_chars(info); + info->last_active = jiffies; +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif + } + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +/* + * This routine is used to handle the "bottom half" processing for the + * serial driver, known also the "software interrupt" processing. + * This processing is done at the kernel interrupt level, after the + * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This + * is where time-consuming activities which can not be done in the + * interrupt driver proper are done; the interrupt driver schedules + * them using rs_sched_event(), and they get done here. + */ + +static void do_softint(unsigned long private_) +{ + struct async_struct *info = (struct async_struct *) private_; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) + tty_wakeup(tty); +} + +/* + * --------------------------------------------------------------- + * Low level utility subroutines for the serial driver: routines to + * figure out the appropriate timeout for an interrupt chain, routines + * to initialize and startup a serial port, and routines to shutdown a + * serial port. Useful stuff like that. + * --------------------------------------------------------------- + */ + +static int startup(struct async_struct * info) +{ + unsigned long flags; + int retval=0; + unsigned long page; + + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + local_irq_save(flags); + + if (info->flags & ASYNC_INITIALIZED) { + free_page(page); + goto errout; + } + + if (info->xmit.buf) + free_page(page); + else + info->xmit.buf = (unsigned char *) page; + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttys%d ...", info->line); +#endif + + /* Clear anything in the input buffer */ + + custom.intreq = IF_RBF; + mb(); + + retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info); + if (retval) { + if (serial_isroot()) { + if (info->tty) + set_bit(TTY_IO_ERROR, + &info->tty->flags); + retval = 0; + } + goto errout; + } + + /* enable both Rx and Tx interrupts */ + custom.intena = IF_SETCLR | IF_RBF | IF_TBE; + mb(); + info->IER = UART_IER_MSI; + + /* remember current state of the DCD and CTS bits */ + current_ctl_bits = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); + + IRQ_ports = info; + + info->MCR = 0; + if (info->tty->termios->c_cflag & CBAUD) + info->MCR = SER_DTR | SER_RTS; + rtsdtr_ctrl(info->MCR); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->xmit.head = info->xmit.tail = 0; + + /* + * Set up the tty->alt_speed kludge + */ + if (info->tty) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + } + + /* + * and set the speed of the serial port + */ + change_speed(info, NULL); + + info->flags |= ASYNC_INITIALIZED; + local_irq_restore(flags); + return 0; + +errout: + local_irq_restore(flags); + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct async_struct * info) +{ + unsigned long flags; + struct serial_state *state; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + state = info->state; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d ....\n", info->line); +#endif + + local_irq_save(flags); /* Disable interrupts */ + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up + */ + wake_up_interruptible(&info->delta_msr_wait); + + IRQ_ports = NULL; + + /* + * Free the IRQ, if necessary + */ + free_irq(IRQ_AMIGA_VERTB, info); + + if (info->xmit.buf) { + free_page((unsigned long) info->xmit.buf); + info->xmit.buf = NULL; + } + + info->IER = 0; + custom.intena = IF_RBF | IF_TBE; + mb(); + + /* disable break condition */ + custom.adkcon = AC_UARTBRK; + mb(); + + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + info->MCR &= ~(SER_DTR|SER_RTS); + rtsdtr_ctrl(info->MCR); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); +} + + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void change_speed(struct async_struct *info, + struct ktermios *old_termios) +{ + int quot = 0, baud_base, baud; + unsigned cflag, cval = 0; + int bits; + unsigned long flags; + + if (!info->tty || !info->tty->termios) + return; + cflag = info->tty->termios->c_cflag; + + /* Byte size is always 8 bits plus parity bit if requested */ + + cval = 3; bits = 10; + if (cflag & CSTOPB) { + cval |= 0x04; + bits++; + } + if (cflag & PARENB) { + cval |= UART_LCR_PARITY; + bits++; + } + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(info->tty); + if (!baud) + baud = 9600; /* B0 transition handled in rs_set_termios */ + baud_base = info->state->baud_base; + if (baud == 38400 && + ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) + quot = info->state->custom_divisor; + else { + if (baud == 134) + /* Special case since 134 is really 134.5 */ + quot = (2*baud_base / 269); + else if (baud) + quot = baud_base / baud; + } + /* If the quotient is zero refuse the change */ + if (!quot && old_termios) { + /* FIXME: Will need updating for new tty in the end */ + info->tty->termios->c_cflag &= ~CBAUD; + info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); + baud = tty_get_baud_rate(info->tty); + if (!baud) + baud = 9600; + if (baud == 38400 && + ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) + quot = info->state->custom_divisor; + else { + if (baud == 134) + /* Special case since 134 is really 134.5 */ + quot = (2*baud_base / 269); + else if (baud) + quot = baud_base / baud; + } + } + /* As a last resort, if the quotient is zero, default to 9600 bps */ + if (!quot) + quot = baud_base / 9600; + info->quot = quot; + info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base); + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + if (info->flags & ASYNC_HARDPPS_CD) + info->IER |= UART_IER_MSI; + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + info->IER |= UART_IER_MSI; + } else + info->flags &= ~ASYNC_CTS_FLOW; + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else { + info->flags |= ASYNC_CHECK_CD; + info->IER |= UART_IER_MSI; + } + /* TBD: + * Does clearing IER_MSI imply that we should disable the VBL interrupt ? + */ + + /* + * Set up parity check flag + */ + + info->read_status_mask = UART_LSR_OE | UART_LSR_DR; + if (I_INPCK(info->tty)) + info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + info->read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + info->ignore_status_mask = 0; + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (I_IGNBRK(info->tty)) { + info->ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= UART_LSR_OE; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + info->ignore_status_mask |= UART_LSR_DR; + local_irq_save(flags); + + { + short serper; + + /* Set up the baud rate */ + serper = quot - 1; + + /* Enable or disable parity bit */ + + if(cval & UART_LCR_PARITY) + serper |= (SERPER_PARENB); + + custom.serper = serper; + mb(); + } + + info->LCR = cval; /* Save LCR */ + local_irq_restore(flags); +} + +static int rs_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct async_struct *info; + unsigned long flags; + + info = tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_put_char")) + return 0; + + if (!info->xmit.buf) + return 0; + + local_irq_save(flags); + if (CIRC_SPACE(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) == 0) { + local_irq_restore(flags); + return 0; + } + + info->xmit.buf[info->xmit.head++] = ch; + info->xmit.head &= SERIAL_XMIT_SIZE-1; + local_irq_restore(flags); + return 1; +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct async_struct *info = tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) + return; + + if (info->xmit.head == info->xmit.tail + || tty->stopped + || tty->hw_stopped + || !info->xmit.buf) + return; + + local_irq_save(flags); + info->IER |= UART_IER_THRI; + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + local_irq_restore(flags); +} + +static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count) +{ + int c, ret = 0; + struct async_struct *info; + unsigned long flags; + + info = tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!info->xmit.buf) + return 0; + + local_irq_save(flags); + while (1) { + c = CIRC_SPACE_TO_END(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) { + break; + } + memcpy(info->xmit.buf + info->xmit.head, buf, c); + info->xmit.head = ((info->xmit.head + c) & + (SERIAL_XMIT_SIZE-1)); + buf += c; + count -= c; + ret += c; + } + local_irq_restore(flags); + + if (info->xmit.head != info->xmit.tail + && !tty->stopped + && !tty->hw_stopped + && !(info->IER & UART_IER_THRI)) { + info->IER |= UART_IER_THRI; + local_irq_disable(); + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + local_irq_restore(flags); + } + return ret; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct async_struct *info = tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct async_struct *info = tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct async_struct *info = tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + local_irq_save(flags); + info->xmit.head = info->xmit.tail = 0; + local_irq_restore(flags); + tty_wakeup(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void rs_send_xchar(struct tty_struct *tty, char ch) +{ + struct async_struct *info = tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_send_char")) + return; + + info->x_char = ch; + if (ch) { + /* Make sure transmit interrupts are on */ + + /* Check this ! */ + local_irq_save(flags); + if(!(custom.intenar & IF_TBE)) { + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + } + local_irq_restore(flags); + + info->IER |= UART_IER_THRI; + } +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + struct async_struct *info = tty->driver_data; + unsigned long flags; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) + rs_send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) + info->MCR &= ~SER_RTS; + + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct async_struct *info = tty->driver_data; + unsigned long flags; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_send_xchar(tty, START_CHAR(tty)); + } + if (tty->termios->c_cflag & CRTSCTS) + info->MCR |= SER_RTS; + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct async_struct * info, + struct serial_struct __user * retinfo) +{ + struct serial_struct tmp; + struct serial_state *state = info->state; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tty_lock(); + tmp.type = state->type; + tmp.line = state->line; + tmp.port = state->port; + tmp.irq = state->irq; + tmp.flags = state->flags; + tmp.xmit_fifo_size = state->xmit_fifo_size; + tmp.baud_base = state->baud_base; + tmp.close_delay = state->close_delay; + tmp.closing_wait = state->closing_wait; + tmp.custom_divisor = state->custom_divisor; + tty_unlock(); + if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int set_serial_info(struct async_struct * info, + struct serial_struct __user * new_info) +{ + struct serial_struct new_serial; + struct serial_state old_state, *state; + unsigned int change_irq,change_port; + int retval = 0; + + if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) + return -EFAULT; + + tty_lock(); + state = info->state; + old_state = *state; + + change_irq = new_serial.irq != state->irq; + change_port = (new_serial.port != state->port); + if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) { + tty_unlock(); + return -EINVAL; + } + + if (!serial_isroot()) { + if ((new_serial.baud_base != state->baud_base) || + (new_serial.close_delay != state->close_delay) || + (new_serial.xmit_fifo_size != state->xmit_fifo_size) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (state->flags & ~ASYNC_USR_MASK))) + return -EPERM; + state->flags = ((state->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + state->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (new_serial.baud_base < 9600) { + tty_unlock(); + return -EINVAL; + } + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + state->baud_base = new_serial.baud_base; + state->flags = ((state->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | + (info->flags & ASYNC_INTERNAL_FLAGS)); + state->custom_divisor = new_serial.custom_divisor; + state->close_delay = new_serial.close_delay * HZ/100; + state->closing_wait = new_serial.closing_wait * HZ/100; + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + +check_and_exit: + if (info->flags & ASYNC_INITIALIZED) { + if (((old_state.flags & ASYNC_SPD_MASK) != + (state->flags & ASYNC_SPD_MASK)) || + (old_state.custom_divisor != state->custom_divisor)) { + if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + change_speed(info, NULL); + } + } else + retval = startup(info); + tty_unlock(); + return retval; +} + + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct async_struct * info, unsigned int __user *value) +{ + unsigned char status; + unsigned int result; + unsigned long flags; + + local_irq_save(flags); + status = custom.serdatr; + mb(); + local_irq_restore(flags); + result = ((status & SDR_TSRE) ? TIOCSER_TEMT : 0); + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + + +static int rs_tiocmget(struct tty_struct *tty) +{ + struct async_struct * info = tty->driver_data; + unsigned char control, status; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + control = info->MCR; + local_irq_save(flags); + status = ciab.pra; + local_irq_restore(flags); + return ((control & SER_RTS) ? TIOCM_RTS : 0) + | ((control & SER_DTR) ? TIOCM_DTR : 0) + | (!(status & SER_DCD) ? TIOCM_CAR : 0) + | (!(status & SER_DSR) ? TIOCM_DSR : 0) + | (!(status & SER_CTS) ? TIOCM_CTS : 0); +} + +static int rs_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear) +{ + struct async_struct * info = tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + local_irq_save(flags); + if (set & TIOCM_RTS) + info->MCR |= SER_RTS; + if (set & TIOCM_DTR) + info->MCR |= SER_DTR; + if (clear & TIOCM_RTS) + info->MCR &= ~SER_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~SER_DTR; + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); + return 0; +} + +/* + * rs_break() --- routine which turns the break handling on or off + */ +static int rs_break(struct tty_struct *tty, int break_state) +{ + struct async_struct * info = tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_break")) + return -EINVAL; + + local_irq_save(flags); + if (break_state == -1) + custom.adkcon = AC_SETCLR | AC_UARTBRK; + else + custom.adkcon = AC_UARTBRK; + mb(); + local_irq_restore(flags); + return 0; +} + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int rs_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct async_struct *info = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + local_irq_save(flags); + cnow = info->state->icount; + local_irq_restore(flags); + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +static int rs_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct async_struct * info = tty->driver_data; + struct async_icount cprev, cnow; /* kernel counter temps */ + void __user *argp = (void __user *)arg; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(info, argp); + case TIOCSSERIAL: + return set_serial_info(info, argp); + case TIOCSERCONFIG: + return 0; + + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, argp); + + case TIOCSERGSTRUCT: + if (copy_to_user(argp, + info, sizeof(struct async_struct))) + return -EFAULT; + return 0; + + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + local_irq_save(flags); + /* note the counters on entry */ + cprev = info->state->icount; + local_irq_restore(flags); + while (1) { + interruptible_sleep_on(&info->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + local_irq_save(flags); + cnow = info->state->icount; /* atomic copy */ + local_irq_restore(flags); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + return 0; + } + cprev = cnow; + } + /* NOTREACHED */ + + case TIOCSERGWILD: + case TIOCSERSWILD: + /* "setserial -W" is called in Debian boot */ + printk ("TIOCSER?WILD ioctl obsolete, ignored.\n"); + return 0; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct async_struct *info = tty->driver_data; + unsigned long flags; + unsigned int cflag = tty->termios->c_cflag; + + change_speed(info, old_termios); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && + !(cflag & CBAUD)) { + info->MCR &= ~(SER_DTR|SER_RTS); + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + (cflag & CBAUD)) { + info->MCR |= SER_DTR; + if (!(tty->termios->c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { + info->MCR |= SER_RTS; + } + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); +#endif +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct async_struct * info = tty->driver_data; + struct serial_state *state; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + state = info->state; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + DBG_CNT("before DEC-hung"); + local_irq_restore(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_close ttys%d, count = %d\n", info->line, state->count); +#endif + if ((tty->count == 1) && (state->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. state->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "state->count is %d\n", state->count); + state->count = 1; + } + if (--state->count < 0) { + printk("rs_close: bad serial port count for ttys%d: %d\n", + info->line, state->count); + state->count = 0; + } + if (state->count) { + DBG_CNT("before DEC-2"); + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->read_status_mask &= ~UART_LSR_DR; + if (info->flags & ASYNC_INITIALIZED) { + /* disable receive interrupts */ + custom.intena = IF_RBF; + mb(); + /* clear any pending receive interrupt */ + custom.intreq = IF_RBF; + mb(); + + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + rs_wait_until_sent(tty, info->timeout); + } + shutdown(info); + rs_flush_buffer(tty); + + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->tty = NULL; + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct async_struct * info = tty->driver_data; + unsigned long orig_jiffies, char_time; + int tty_was_locked = tty_locked(); + int lsr; + + if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) + return; + + if (info->xmit_fifo_size == 0) + return; /* Just in case.... */ + + orig_jiffies = jiffies; + + /* + * tty_wait_until_sent is called from lots of places, + * with or without the BTM. + */ + if (!tty_was_locked) + tty_lock(); + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ/50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2*info->timeout) + timeout = 2*info->timeout; +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); + printk("jiff=%lu...", jiffies); +#endif + while(!((lsr = custom.serdatr) & SDR_TSRE)) { +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("serdatr = %d (jiff=%lu)...", lsr, jiffies); +#endif + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + __set_current_state(TASK_RUNNING); + if (!tty_was_locked) + tty_unlock(); +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); +#endif +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rs_hangup(struct tty_struct *tty) +{ + struct async_struct * info = tty->driver_data; + struct serial_state *state = info->state; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + state = info->state; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + state->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct async_struct *info) +{ +#ifdef DECLARE_WAITQUEUE + DECLARE_WAITQUEUE(wait, current); +#else + struct wait_queue wait = { current, NULL }; +#endif + struct serial_state *state = info->state; + int retval; + int do_clocal = 0, extra_count = 0; + unsigned long flags; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + return ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, state->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttys%d, count = %d\n", + state->line, state->count); +#endif + local_irq_save(flags); + if (!tty_hung_up_p(filp)) { + extra_count = 1; + state->count--; + } + local_irq_restore(flags); + info->blocked_open++; + while (1) { + local_irq_save(flags); + if (tty->termios->c_cflag & CBAUD) + rtsdtr_ctrl(SER_DTR|SER_RTS); + local_irq_restore(flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (!(ciab.pra & SER_DCD)) )) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttys%d, count = %d\n", + info->line, state->count); +#endif + tty_unlock(); + schedule(); + tty_lock(); + } + __set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + if (extra_count) + state->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttys%d, count = %d\n", + info->line, state->count); +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +static int get_async_struct(int line, struct async_struct **ret_info) +{ + struct async_struct *info; + struct serial_state *sstate; + + sstate = rs_table + line; + sstate->count++; + if (sstate->info) { + *ret_info = sstate->info; + return 0; + } + info = kzalloc(sizeof(struct async_struct), GFP_KERNEL); + if (!info) { + sstate->count--; + return -ENOMEM; + } +#ifdef DECLARE_WAITQUEUE + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->delta_msr_wait); +#endif + info->magic = SERIAL_MAGIC; + info->port = sstate->port; + info->flags = sstate->flags; + info->xmit_fifo_size = sstate->xmit_fifo_size; + info->line = line; + tasklet_init(&info->tlet, do_softint, (unsigned long)info); + info->state = sstate; + if (sstate->info) { + kfree(info); + *ret_info = sstate->info; + return 0; + } + *ret_info = sstate->info = info; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct async_struct *info; + int retval, line; + + line = tty->index; + if ((line < 0) || (line >= NR_PORTS)) { + return -ENODEV; + } + retval = get_async_struct(line, &info); + if (retval) { + return retval; + } + tty->driver_data = info; + info->tty = tty; + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open %s, count = %d\n", tty->name, info->state->count); +#endif + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + /* + * If the port is the middle of closing, bail out now + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + return ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); +#else + return -EAGAIN; +#endif + } + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) { + return retval; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open %s successful...", tty->name); +#endif + return 0; +} + +/* + * /proc fs routines.... + */ + +static inline void line_info(struct seq_file *m, struct serial_state *state) +{ + struct async_struct *info = state->info, scr_info; + char stat_buf[30], control, status; + unsigned long flags; + + seq_printf(m, "%d: uart:amiga_builtin",state->line); + + /* + * Figure out the current RS-232 lines + */ + if (!info) { + info = &scr_info; /* This is just for serial_{in,out} */ + + info->magic = SERIAL_MAGIC; + info->flags = state->flags; + info->quot = 0; + info->tty = NULL; + } + local_irq_save(flags); + status = ciab.pra; + control = info ? info->MCR : status; + local_irq_restore(flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if(!(control & SER_RTS)) + strcat(stat_buf, "|RTS"); + if(!(status & SER_CTS)) + strcat(stat_buf, "|CTS"); + if(!(control & SER_DTR)) + strcat(stat_buf, "|DTR"); + if(!(status & SER_DSR)) + strcat(stat_buf, "|DSR"); + if(!(status & SER_DCD)) + strcat(stat_buf, "|CD"); + + if (info->quot) { + seq_printf(m, " baud:%d", state->baud_base / info->quot); + } + + seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx); + + if (state->icount.frame) + seq_printf(m, " fe:%d", state->icount.frame); + + if (state->icount.parity) + seq_printf(m, " pe:%d", state->icount.parity); + + if (state->icount.brk) + seq_printf(m, " brk:%d", state->icount.brk); + + if (state->icount.overrun) + seq_printf(m, " oe:%d", state->icount.overrun); + + /* + * Last thing is the RS-232 status lines + */ + seq_printf(m, " %s\n", stat_buf+1); +} + +static int rs_proc_show(struct seq_file *m, void *v) +{ + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + line_info(m, &rs_table[0]); + return 0; +} + +static int rs_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, rs_proc_show, NULL); +} + +static const struct file_operations rs_proc_fops = { + .owner = THIS_MODULE, + .open = rs_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * --------------------------------------------------------------------- + * rs_init() and friends + * + * rs_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ +static void show_serial_version(void) +{ + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); +} + + +static const struct tty_operations serial_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .put_char = rs_put_char, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .break_ctl = rs_break, + .send_xchar = rs_send_xchar, + .wait_until_sent = rs_wait_until_sent, + .tiocmget = rs_tiocmget, + .tiocmset = rs_tiocmset, + .get_icount = rs_get_icount, + .proc_fops = &rs_proc_fops, +}; + +/* + * The serial driver boot-time initialization code! + */ +static int __init amiga_serial_probe(struct platform_device *pdev) +{ + unsigned long flags; + struct serial_state * state; + int error; + + serial_driver = alloc_tty_driver(1); + if (!serial_driver) + return -ENOMEM; + + IRQ_ports = NULL; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = "amiserial"; + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &serial_ops); + + error = tty_register_driver(serial_driver); + if (error) + goto fail_put_tty_driver; + + state = rs_table; + state->magic = SSTATE_MAGIC; + state->port = (int)&custom.serdatr; /* Just to give it a value */ + state->line = 0; + state->custom_divisor = 0; + state->close_delay = 5*HZ/10; + state->closing_wait = 30*HZ; + state->icount.cts = state->icount.dsr = + state->icount.rng = state->icount.dcd = 0; + state->icount.rx = state->icount.tx = 0; + state->icount.frame = state->icount.parity = 0; + state->icount.overrun = state->icount.brk = 0; + + printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n", + state->line); + + /* Hardware set up */ + + state->baud_base = amiga_colorclock; + state->xmit_fifo_size = 1; + + /* set ISRs, and then disable the rx interrupts */ + error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state); + if (error) + goto fail_unregister; + + error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, + "serial RX", state); + if (error) + goto fail_free_irq; + + local_irq_save(flags); + + /* turn off Rx and Tx interrupts */ + custom.intena = IF_RBF | IF_TBE; + mb(); + + /* clear any pending interrupt */ + custom.intreq = IF_RBF | IF_TBE; + mb(); + + local_irq_restore(flags); + + /* + * set the appropriate directions for the modem control flags, + * and clear RTS and DTR + */ + ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */ + ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */ + + platform_set_drvdata(pdev, state); + + return 0; + +fail_free_irq: + free_irq(IRQ_AMIGA_TBE, state); +fail_unregister: + tty_unregister_driver(serial_driver); +fail_put_tty_driver: + put_tty_driver(serial_driver); + return error; +} + +static int __exit amiga_serial_remove(struct platform_device *pdev) +{ + int error; + struct serial_state *state = platform_get_drvdata(pdev); + struct async_struct *info = state->info; + + /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ + tasklet_kill(&info->tlet); + if ((error = tty_unregister_driver(serial_driver))) + printk("SERIAL: failed to unregister serial driver (%d)\n", + error); + put_tty_driver(serial_driver); + + rs_table[0].info = NULL; + kfree(info); + + free_irq(IRQ_AMIGA_TBE, rs_table); + free_irq(IRQ_AMIGA_RBF, rs_table); + + platform_set_drvdata(pdev, NULL); + + return error; +} + +static struct platform_driver amiga_serial_driver = { + .remove = __exit_p(amiga_serial_remove), + .driver = { + .name = "amiga-serial", + .owner = THIS_MODULE, + }, +}; + +static int __init amiga_serial_init(void) +{ + return platform_driver_probe(&amiga_serial_driver, amiga_serial_probe); +} + +module_init(amiga_serial_init); + +static void __exit amiga_serial_exit(void) +{ + platform_driver_unregister(&amiga_serial_driver); +} + +module_exit(amiga_serial_exit); + + +#if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE) + +/* + * ------------------------------------------------------------ + * Serial console driver + * ------------------------------------------------------------ + */ + +static void amiga_serial_putc(char c) +{ + custom.serdat = (unsigned char)c | 0x100; + while (!(custom.serdatr & 0x2000)) + barrier(); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console must be locked when we get here. + */ +static void serial_console_write(struct console *co, const char *s, + unsigned count) +{ + unsigned short intena = custom.intenar; + + custom.intena = IF_TBE; + + while (count--) { + if (*s == '\n') + amiga_serial_putc('\r'); + amiga_serial_putc(*s++); + } + + custom.intena = IF_SETCLR | (intena & IF_TBE); +} + +static struct tty_driver *serial_console_device(struct console *c, int *index) +{ + *index = 0; + return serial_driver; +} + +static struct console sercons = { + .name = "ttyS", + .write = serial_console_write, + .device = serial_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* + * Register console. + */ +static int __init amiserial_console_init(void) +{ + register_console(&sercons); + return 0; +} +console_initcall(amiserial_console_init); + +#endif /* CONFIG_SERIAL_CONSOLE && !MODULE */ + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:amiga-serial"); diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c new file mode 100644 index 000000000000..16402445f2b2 --- /dev/null +++ b/drivers/tty/bfin_jtag_comm.c @@ -0,0 +1,366 @@ +/* + * TTY over Blackfin JTAG Communication + * + * Copyright 2008-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#define DRV_NAME "bfin-jtag-comm" +#define DEV_NAME "ttyBFJC" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); }) + +/* See the Debug/Emulation chapter in the HRM */ +#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ +#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ +#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ +#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ + +static inline uint32_t bfin_write_emudat(uint32_t emudat) +{ + __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_read_emudat(void) +{ + uint32_t emudat; + __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d) +{ + return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24)); +} + +#define CIRC_SIZE 2048 /* see comment in tty_io.c:do_tty_write() */ +#define CIRC_MASK (CIRC_SIZE - 1) +#define circ_empty(circ) ((circ)->head == (circ)->tail) +#define circ_free(circ) CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_cnt(circ) CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK]) + +static struct tty_driver *bfin_jc_driver; +static struct task_struct *bfin_jc_kthread; +static struct tty_struct * volatile bfin_jc_tty; +static unsigned long bfin_jc_count; +static DEFINE_MUTEX(bfin_jc_tty_mutex); +static volatile struct circ_buf bfin_jc_write_buf; + +static int +bfin_jc_emudat_manager(void *arg) +{ + uint32_t inbound_len = 0, outbound_len = 0; + + while (!kthread_should_stop()) { + /* no one left to give data to, so sleep */ + if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) { + pr_debug("waiting for readers\n"); + __set_current_state(TASK_UNINTERRUPTIBLE); + schedule(); + __set_current_state(TASK_RUNNING); + } + + /* no data available, so just chill */ + if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) { + pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n", + inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head); + if (inbound_len) + schedule(); + else + schedule_timeout_interruptible(HZ); + continue; + } + + /* if incoming data is ready, eat it */ + if (bfin_read_DBGSTAT() & EMUDIF) { + struct tty_struct *tty; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty != NULL) { + uint32_t emudat = bfin_read_emudat(); + if (inbound_len == 0) { + pr_debug("incoming length: 0x%08x\n", emudat); + inbound_len = emudat; + } else { + size_t num_chars = (4 <= inbound_len ? 4 : inbound_len); + pr_debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars); + inbound_len -= num_chars; + tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars); + tty_flip_buffer_push(tty); + } + } + mutex_unlock(&bfin_jc_tty_mutex); + } + + /* if outgoing data is ready, post it */ + if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) { + if (outbound_len == 0) { + outbound_len = circ_cnt(&bfin_jc_write_buf); + bfin_write_emudat(outbound_len); + pr_debug("outgoing length: 0x%08x\n", outbound_len); + } else { + struct tty_struct *tty; + int tail = bfin_jc_write_buf.tail; + size_t ate = (4 <= outbound_len ? 4 : outbound_len); + uint32_t emudat = + bfin_write_emudat_chars( + circ_byte(&bfin_jc_write_buf, tail + 0), + circ_byte(&bfin_jc_write_buf, tail + 1), + circ_byte(&bfin_jc_write_buf, tail + 2), + circ_byte(&bfin_jc_write_buf, tail + 3) + ); + bfin_jc_write_buf.tail += ate; + outbound_len -= ate; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty) + tty_wakeup(tty); + mutex_unlock(&bfin_jc_tty_mutex); + pr_debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate); + } + } + } + + __set_current_state(TASK_RUNNING); + return 0; +} + +static int +bfin_jc_open(struct tty_struct *tty, struct file *filp) +{ + mutex_lock(&bfin_jc_tty_mutex); + pr_debug("open %lu\n", bfin_jc_count); + ++bfin_jc_count; + bfin_jc_tty = tty; + wake_up_process(bfin_jc_kthread); + mutex_unlock(&bfin_jc_tty_mutex); + return 0; +} + +static void +bfin_jc_close(struct tty_struct *tty, struct file *filp) +{ + mutex_lock(&bfin_jc_tty_mutex); + pr_debug("close %lu\n", bfin_jc_count); + if (--bfin_jc_count == 0) + bfin_jc_tty = NULL; + wake_up_process(bfin_jc_kthread); + mutex_unlock(&bfin_jc_tty_mutex); +} + +/* XXX: we dont handle the put_char() case where we must handle count = 1 */ +static int +bfin_jc_circ_write(const unsigned char *buf, int count) +{ + int i; + count = min(count, circ_free(&bfin_jc_write_buf)); + pr_debug("going to write chunk of %i bytes\n", count); + for (i = 0; i < count; ++i) + circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i]; + bfin_jc_write_buf.head += i; + return i; +} + +#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE +# define console_lock() +# define console_unlock() +#endif +static int +bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + int i; + console_lock(); + i = bfin_jc_circ_write(buf, count); + console_unlock(); + wake_up_process(bfin_jc_kthread); + return i; +} + +static void +bfin_jc_flush_chars(struct tty_struct *tty) +{ + wake_up_process(bfin_jc_kthread); +} + +static int +bfin_jc_write_room(struct tty_struct *tty) +{ + return circ_free(&bfin_jc_write_buf); +} + +static int +bfin_jc_chars_in_buffer(struct tty_struct *tty) +{ + return circ_cnt(&bfin_jc_write_buf); +} + +static void +bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout) +{ + unsigned long expire = jiffies + timeout; + while (!circ_empty(&bfin_jc_write_buf)) { + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } +} + +static const struct tty_operations bfin_jc_ops = { + .open = bfin_jc_open, + .close = bfin_jc_close, + .write = bfin_jc_write, + /*.put_char = bfin_jc_put_char,*/ + .flush_chars = bfin_jc_flush_chars, + .write_room = bfin_jc_write_room, + .chars_in_buffer = bfin_jc_chars_in_buffer, + .wait_until_sent = bfin_jc_wait_until_sent, +}; + +static int __init bfin_jc_init(void) +{ + int ret; + + bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME); + if (IS_ERR(bfin_jc_kthread)) + return PTR_ERR(bfin_jc_kthread); + + ret = -ENOMEM; + + bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0; + bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL); + if (!bfin_jc_write_buf.buf) + goto err; + + bfin_jc_driver = alloc_tty_driver(1); + if (!bfin_jc_driver) + goto err; + + bfin_jc_driver->owner = THIS_MODULE; + bfin_jc_driver->driver_name = DRV_NAME; + bfin_jc_driver->name = DEV_NAME; + bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL; + bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL; + bfin_jc_driver->init_termios = tty_std_termios; + tty_set_operations(bfin_jc_driver, &bfin_jc_ops); + + ret = tty_register_driver(bfin_jc_driver); + if (ret) + goto err; + + pr_init(KERN_INFO DRV_NAME ": initialized\n"); + + return 0; + + err: + put_tty_driver(bfin_jc_driver); + kfree(bfin_jc_write_buf.buf); + kthread_stop(bfin_jc_kthread); + return ret; +} +module_init(bfin_jc_init); + +static void __exit bfin_jc_exit(void) +{ + kthread_stop(bfin_jc_kthread); + kfree(bfin_jc_write_buf.buf); + tty_unregister_driver(bfin_jc_driver); + put_tty_driver(bfin_jc_driver); +} +module_exit(bfin_jc_exit); + +#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +static void +bfin_jc_straight_buffer_write(const char *buf, unsigned count) +{ + unsigned ate = 0; + while (bfin_read_DBGSTAT() & EMUDOF) + continue; + bfin_write_emudat(count); + while (ate < count) { + while (bfin_read_DBGSTAT() & EMUDOF) + continue; + bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]); + ate += 4; + } +} +#endif + +#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE +static void +bfin_jc_console_write(struct console *co, const char *buf, unsigned count) +{ + if (bfin_jc_kthread == NULL) + bfin_jc_straight_buffer_write(buf, count); + else + bfin_jc_circ_write(buf, count); +} + +static struct tty_driver * +bfin_jc_console_device(struct console *co, int *index) +{ + *index = co->index; + return bfin_jc_driver; +} + +static struct console bfin_jc_console = { + .name = DEV_NAME, + .write = bfin_jc_console_write, + .device = bfin_jc_console_device, + .flags = CON_ANYTIME | CON_PRINTBUFFER, + .index = -1, +}; + +static int __init bfin_jc_console_init(void) +{ + register_console(&bfin_jc_console); + return 0; +} +console_initcall(bfin_jc_console_init); +#endif + +#ifdef CONFIG_EARLY_PRINTK +static void __init +bfin_jc_early_write(struct console *co, const char *buf, unsigned int count) +{ + bfin_jc_straight_buffer_write(buf, count); +} + +static struct __initdata console bfin_jc_early_console = { + .name = "early_BFJC", + .write = bfin_jc_early_write, + .flags = CON_ANYTIME | CON_PRINTBUFFER, + .index = -1, +}; + +struct console * __init +bfin_jc_early_init(unsigned int port, unsigned int cflag) +{ + return &bfin_jc_early_console; +} +#endif + +MODULE_AUTHOR("Mike Frysinger "); +MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c new file mode 100644 index 000000000000..c99728f0cd9f --- /dev/null +++ b/drivers/tty/cyclades.c @@ -0,0 +1,4200 @@ +#undef BLOCKMOVE +#define Z_WAKE +#undef Z_EXT_CHARS_IN_BUFFER + +/* + * linux/drivers/char/cyclades.c + * + * This file contains the driver for the Cyclades async multiport + * serial boards. + * + * Initially written by Randolph Bentson . + * Modified and maintained by Marcio Saito . + * + * Copyright (C) 2007-2009 Jiri Slaby + * + * Much of the design and some of the code came from serial.c + * which was copyright (C) 1991, 1992 Linus Torvalds. It was + * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, + * and then fixed as suggested by Michael K. Johnson 12/12/92. + * Converted to pci probing and cleaned up by Jiri Slaby. + * + */ + +#define CY_VERSION "2.6" + +/* If you need to install more boards than NR_CARDS, change the constant + in the definition below. No other change is necessary to support up to + eight boards. Beyond that you'll have to extend cy_isa_addresses. */ + +#define NR_CARDS 4 + +/* + If the total number of ports is larger than NR_PORTS, change this + constant in the definition below. No other change is necessary to + support more boards/ports. */ + +#define NR_PORTS 256 + +#define ZO_V1 0 +#define ZO_V2 1 +#define ZE_V1 2 + +#define SERIAL_PARANOIA_CHECK +#undef CY_DEBUG_OPEN +#undef CY_DEBUG_THROTTLE +#undef CY_DEBUG_OTHER +#undef CY_DEBUG_IO +#undef CY_DEBUG_COUNT +#undef CY_DEBUG_DTR +#undef CY_DEBUG_WAIT_UNTIL_SENT +#undef CY_DEBUG_INTERRUPTS +#undef CY_16Y_HACK +#undef CY_ENABLE_MONITORING +#undef CY_PCI_DEBUG + +/* + * Include section + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include + +static void cy_send_xchar(struct tty_struct *tty, char ch); + +#ifndef SERIAL_XMIT_SIZE +#define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) +#endif + +#define STD_COM_FLAGS (0) + +/* firmware stuff */ +#define ZL_MAX_BLOCKS 16 +#define DRIVER_VERSION 0x02010203 +#define RAM_SIZE 0x80000 + +enum zblock_type { + ZBLOCK_PRG = 0, + ZBLOCK_FPGA = 1 +}; + +struct zfile_header { + char name[64]; + char date[32]; + char aux[32]; + u32 n_config; + u32 config_offset; + u32 n_blocks; + u32 block_offset; + u32 reserved[9]; +} __attribute__ ((packed)); + +struct zfile_config { + char name[64]; + u32 mailbox; + u32 function; + u32 n_blocks; + u32 block_list[ZL_MAX_BLOCKS]; +} __attribute__ ((packed)); + +struct zfile_block { + u32 type; + u32 file_offset; + u32 ram_offset; + u32 size; +} __attribute__ ((packed)); + +static struct tty_driver *cy_serial_driver; + +#ifdef CONFIG_ISA +/* This is the address lookup table. The driver will probe for + Cyclom-Y/ISA boards at all addresses in here. If you want the + driver to probe addresses at a different address, add it to + this table. If the driver is probing some other board and + causing problems, remove the offending address from this table. +*/ + +static unsigned int cy_isa_addresses[] = { + 0xD0000, + 0xD2000, + 0xD4000, + 0xD6000, + 0xD8000, + 0xDA000, + 0xDC000, + 0xDE000, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +#define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) + +static long maddr[NR_CARDS]; +static int irq[NR_CARDS]; + +module_param_array(maddr, long, NULL, 0); +module_param_array(irq, int, NULL, 0); + +#endif /* CONFIG_ISA */ + +/* This is the per-card data structure containing address, irq, number of + channels, etc. This driver supports a maximum of NR_CARDS cards. +*/ +static struct cyclades_card cy_card[NR_CARDS]; + +static int cy_next_channel; /* next minor available */ + +/* + * This is used to look up the divisor speeds and the timeouts + * We're normally limited to 15 distinct baud rates. The extra + * are accessed via settings in info->port.flags. + * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, + * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, + * HI VHI + * 20 + */ +static const int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, + 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, + 230400, 0 +}; + +static const char baud_co_25[] = { /* 25 MHz clock option table */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, + 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static const char baud_bpr_25[] = { /* 25 MHz baud rate period table */ + 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, + 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 +}; + +static const char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, + 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 +}; + +static const char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */ + 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62, + 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32, + 0x21 +}; + +static const char baud_cor3[] = { /* receive threshold */ + 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, + 0x07 +}; + +/* + * The Cyclades driver implements HW flow control as any serial driver. + * The cyclades_port structure member rflow and the vector rflow_thr + * allows us to take advantage of a special feature in the CD1400 to avoid + * data loss even when the system interrupt latency is too high. These flags + * are to be used only with very special applications. Setting these flags + * requires the use of a special cable (DTR and RTS reversed). In the new + * CD1400-based boards (rev. 6.00 or later), there is no need for special + * cables. + */ + +static const char rflow_thr[] = { /* rflow threshold */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a +}; + +/* The Cyclom-Ye has placed the sequential chips in non-sequential + * address order. This look-up table overcomes that problem. + */ +static const unsigned int cy_chip_offset[] = { 0x0000, + 0x0400, + 0x0800, + 0x0C00, + 0x0200, + 0x0600, + 0x0A00, + 0x0E00 +}; + +/* PCI related definitions */ + +#ifdef CONFIG_PCI +static const struct pci_device_id cy_pci_dev_id[] = { + /* PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, + /* PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, + /* 4Y PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, + /* 4Y PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, + /* 8Y PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, + /* 8Y PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, + /* Z PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, + /* Z PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, + { } /* end of table */ +}; +MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); +#endif + +static void cy_start(struct tty_struct *); +static void cy_set_line_char(struct cyclades_port *, struct tty_struct *); +static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); +#ifdef CONFIG_ISA +static unsigned detect_isa_irq(void __iomem *); +#endif /* CONFIG_ISA */ + +#ifndef CONFIG_CYZ_INTR +static void cyz_poll(unsigned long); + +/* The Cyclades-Z polling cycle is defined by this variable */ +static long cyz_polling_cycle = CZ_DEF_POLL; + +static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0); + +#else /* CONFIG_CYZ_INTR */ +static void cyz_rx_restart(unsigned long); +static struct timer_list cyz_rx_full_timer[NR_PORTS]; +#endif /* CONFIG_CYZ_INTR */ + +static inline void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val) +{ + struct cyclades_card *card = port->card; + + cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val); +} + +static inline u8 cyy_readb(struct cyclades_port *port, u32 reg) +{ + struct cyclades_card *card = port->card; + + return readb(port->u.cyy.base_addr + (reg << card->bus_index)); +} + +static inline bool cy_is_Z(struct cyclades_card *card) +{ + return card->num_chips == (unsigned int)-1; +} + +static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr) +{ + return readl(&ctl_addr->init_ctrl) & (1 << 17); +} + +static inline bool cyz_fpga_loaded(struct cyclades_card *card) +{ + return __cyz_fpga_loaded(card->ctl_addr.p9060); +} + +static inline bool cyz_is_loaded(struct cyclades_card *card) +{ + struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS; + + return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) && + readl(&fw_id->signature) == ZFIRM_ID; +} + +static inline int serial_paranoia_check(struct cyclades_port *info, + const char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + if (!info) { + printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) " + "in %s\n", name, routine); + return 1; + } + + if (info->magic != CYCLADES_MAGIC) { + printk(KERN_WARNING "cyc Warning: bad magic number for serial " + "struct (%s) in %s\n", name, routine); + return 1; + } +#endif + return 0; +} + +/***********************************************************/ +/********* Start of block of Cyclom-Y specific code ********/ + +/* This routine waits up to 1000 micro-seconds for the previous + command to the Cirrus chip to complete and then issues the + new command. An error is returned if the previous command + didn't finish within the time limit. + + This function is only called from inside spinlock-protected code. + */ +static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index) +{ + void __iomem *ccr = base_addr + (CyCCR << index); + unsigned int i; + + /* Check to see that the previous command has completed */ + for (i = 0; i < 100; i++) { + if (readb(ccr) == 0) + break; + udelay(10L); + } + /* if the CCR never cleared, the previous command + didn't finish within the "reasonable time" */ + if (i == 100) + return -1; + + /* Issue the new command */ + cy_writeb(ccr, cmd); + + return 0; +} + +static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd) +{ + return __cyy_issue_cmd(port->u.cyy.base_addr, cmd, + port->card->bus_index); +} + +#ifdef CONFIG_ISA +/* ISA interrupt detection code */ +static unsigned detect_isa_irq(void __iomem *address) +{ + int irq; + unsigned long irqs, flags; + int save_xir, save_car; + int index = 0; /* IRQ probing is only for ISA */ + + /* forget possible initially masked and pending IRQ */ + irq = probe_irq_off(probe_irq_on()); + + /* Clear interrupts on the board first */ + cy_writeb(address + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + + irqs = probe_irq_on(); + /* Wait ... */ + msleep(5); + + /* Enable the Tx interrupts on the CD1400 */ + local_irq_save(flags); + cy_writeb(address + (CyCAR << index), 0); + __cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index); + + cy_writeb(address + (CyCAR << index), 0); + cy_writeb(address + (CySRER << index), + readb(address + (CySRER << index)) | CyTxRdy); + local_irq_restore(flags); + + /* Wait ... */ + msleep(5); + + /* Check which interrupt is in use */ + irq = probe_irq_off(irqs); + + /* Clean up */ + save_xir = (u_char) readb(address + (CyTIR << index)); + save_car = readb(address + (CyCAR << index)); + cy_writeb(address + (CyCAR << index), (save_xir & 0x3)); + cy_writeb(address + (CySRER << index), + readb(address + (CySRER << index)) & ~CyTxRdy); + cy_writeb(address + (CyTIR << index), (save_xir & 0x3f)); + cy_writeb(address + (CyCAR << index), (save_car)); + cy_writeb(address + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + + return (irq > 0) ? irq : 0; +} +#endif /* CONFIG_ISA */ + +static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, + void __iomem *base_addr) +{ + struct cyclades_port *info; + struct tty_struct *tty; + int len, index = cinfo->bus_index; + u8 ivr, save_xir, channel, save_car, data, char_count; + +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip); +#endif + /* determine the channel & change to that context */ + save_xir = readb(base_addr + (CyRIR << index)); + channel = save_xir & CyIRChannel; + info = &cinfo->ports[channel + chip * 4]; + save_car = cyy_readb(info, CyCAR); + cyy_writeb(info, CyCAR, save_xir); + ivr = cyy_readb(info, CyRIVR) & CyIVRMask; + + tty = tty_port_tty_get(&info->port); + /* if there is nowhere to put the data, discard it */ + if (tty == NULL) { + if (ivr == CyIVRRxEx) { /* exception */ + data = cyy_readb(info, CyRDSR); + } else { /* normal character reception */ + char_count = cyy_readb(info, CyRDCR); + while (char_count--) + data = cyy_readb(info, CyRDSR); + } + goto end; + } + /* there is an open port for this data */ + if (ivr == CyIVRRxEx) { /* exception */ + data = cyy_readb(info, CyRDSR); + + /* For statistics only */ + if (data & CyBREAK) + info->icount.brk++; + else if (data & CyFRAME) + info->icount.frame++; + else if (data & CyPARITY) + info->icount.parity++; + else if (data & CyOVERRUN) + info->icount.overrun++; + + if (data & info->ignore_status_mask) { + info->icount.rx++; + tty_kref_put(tty); + return; + } + if (tty_buffer_request_room(tty, 1)) { + if (data & info->read_status_mask) { + if (data & CyBREAK) { + tty_insert_flip_char(tty, + cyy_readb(info, CyRDSR), + TTY_BREAK); + info->icount.rx++; + if (info->port.flags & ASYNC_SAK) + do_SAK(tty); + } else if (data & CyFRAME) { + tty_insert_flip_char(tty, + cyy_readb(info, CyRDSR), + TTY_FRAME); + info->icount.rx++; + info->idle_stats.frame_errs++; + } else if (data & CyPARITY) { + /* Pieces of seven... */ + tty_insert_flip_char(tty, + cyy_readb(info, CyRDSR), + TTY_PARITY); + info->icount.rx++; + info->idle_stats.parity_errs++; + } else if (data & CyOVERRUN) { + tty_insert_flip_char(tty, 0, + TTY_OVERRUN); + info->icount.rx++; + /* If the flip buffer itself is + overflowing, we still lose + the next incoming character. + */ + tty_insert_flip_char(tty, + cyy_readb(info, CyRDSR), + TTY_FRAME); + info->icount.rx++; + info->idle_stats.overruns++; + /* These two conditions may imply */ + /* a normal read should be done. */ + /* } else if(data & CyTIMEOUT) { */ + /* } else if(data & CySPECHAR) { */ + } else { + tty_insert_flip_char(tty, 0, + TTY_NORMAL); + info->icount.rx++; + } + } else { + tty_insert_flip_char(tty, 0, TTY_NORMAL); + info->icount.rx++; + } + } else { + /* there was a software buffer overrun and nothing + * could be done about it!!! */ + info->icount.buf_overrun++; + info->idle_stats.overruns++; + } + } else { /* normal character reception */ + /* load # chars available from the chip */ + char_count = cyy_readb(info, CyRDCR); + +#ifdef CY_ENABLE_MONITORING + ++info->mon.int_count; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; +#endif + len = tty_buffer_request_room(tty, char_count); + while (len--) { + data = cyy_readb(info, CyRDSR); + tty_insert_flip_char(tty, data, TTY_NORMAL); + info->idle_stats.recv_bytes++; + info->icount.rx++; +#ifdef CY_16Y_HACK + udelay(10L); +#endif + } + info->idle_stats.recv_idle = jiffies; + } + tty_schedule_flip(tty); + tty_kref_put(tty); +end: + /* end of service */ + cyy_writeb(info, CyRIR, save_xir & 0x3f); + cyy_writeb(info, CyCAR, save_car); +} + +static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, + void __iomem *base_addr) +{ + struct cyclades_port *info; + struct tty_struct *tty; + int char_count, index = cinfo->bus_index; + u8 save_xir, channel, save_car, outch; + + /* Since we only get here when the transmit buffer + is empty, we know we can always stuff a dozen + characters. */ +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip); +#endif + + /* determine the channel & change to that context */ + save_xir = readb(base_addr + (CyTIR << index)); + channel = save_xir & CyIRChannel; + save_car = readb(base_addr + (CyCAR << index)); + cy_writeb(base_addr + (CyCAR << index), save_xir); + + info = &cinfo->ports[channel + chip * 4]; + tty = tty_port_tty_get(&info->port); + if (tty == NULL) { + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy); + goto end; + } + + /* load the on-chip space for outbound data */ + char_count = info->xmit_fifo_size; + + if (info->x_char) { /* send special char */ + outch = info->x_char; + cyy_writeb(info, CyTDR, outch); + char_count--; + info->icount.tx++; + info->x_char = 0; + } + + if (info->breakon || info->breakoff) { + if (info->breakon) { + cyy_writeb(info, CyTDR, 0); + cyy_writeb(info, CyTDR, 0x81); + info->breakon = 0; + char_count -= 2; + } + if (info->breakoff) { + cyy_writeb(info, CyTDR, 0); + cyy_writeb(info, CyTDR, 0x83); + info->breakoff = 0; + char_count -= 2; + } + } + + while (char_count-- > 0) { + if (!info->xmit_cnt) { + if (cyy_readb(info, CySRER) & CyTxMpty) { + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) & ~CyTxMpty); + } else { + cyy_writeb(info, CySRER, CyTxMpty | + (cyy_readb(info, CySRER) & ~CyTxRdy)); + } + goto done; + } + if (info->port.xmit_buf == NULL) { + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) & ~CyTxRdy); + goto done; + } + if (tty->stopped || tty->hw_stopped) { + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) & ~CyTxRdy); + goto done; + } + /* Because the Embedded Transmit Commands have been enabled, + * we must check to see if the escape character, NULL, is being + * sent. If it is, we must ensure that there is room for it to + * be doubled in the output stream. Therefore we no longer + * advance the pointer when the character is fetched, but + * rather wait until after the check for a NULL output + * character. This is necessary because there may not be room + * for the two chars needed to send a NULL.) + */ + outch = info->port.xmit_buf[info->xmit_tail]; + if (outch) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) & + (SERIAL_XMIT_SIZE - 1); + cyy_writeb(info, CyTDR, outch); + info->icount.tx++; + } else { + if (char_count > 1) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) & + (SERIAL_XMIT_SIZE - 1); + cyy_writeb(info, CyTDR, outch); + cyy_writeb(info, CyTDR, 0); + info->icount.tx++; + char_count--; + } + } + } + +done: + tty_wakeup(tty); + tty_kref_put(tty); +end: + /* end of service */ + cyy_writeb(info, CyTIR, save_xir & 0x3f); + cyy_writeb(info, CyCAR, save_car); +} + +static void cyy_chip_modem(struct cyclades_card *cinfo, int chip, + void __iomem *base_addr) +{ + struct cyclades_port *info; + struct tty_struct *tty; + int index = cinfo->bus_index; + u8 save_xir, channel, save_car, mdm_change, mdm_status; + + /* determine the channel & change to that context */ + save_xir = readb(base_addr + (CyMIR << index)); + channel = save_xir & CyIRChannel; + info = &cinfo->ports[channel + chip * 4]; + save_car = cyy_readb(info, CyCAR); + cyy_writeb(info, CyCAR, save_xir); + + mdm_change = cyy_readb(info, CyMISR); + mdm_status = cyy_readb(info, CyMSVR1); + + tty = tty_port_tty_get(&info->port); + if (!tty) + goto end; + + if (mdm_change & CyANY_DELTA) { + /* For statistics only */ + if (mdm_change & CyDCD) + info->icount.dcd++; + if (mdm_change & CyCTS) + info->icount.cts++; + if (mdm_change & CyDSR) + info->icount.dsr++; + if (mdm_change & CyRI) + info->icount.rng++; + + wake_up_interruptible(&info->port.delta_msr_wait); + } + + if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) { + if (mdm_status & CyDCD) + wake_up_interruptible(&info->port.open_wait); + else + tty_hangup(tty); + } + if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) { + if (tty->hw_stopped) { + if (mdm_status & CyCTS) { + /* cy_start isn't used + because... !!! */ + tty->hw_stopped = 0; + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) | CyTxRdy); + tty_wakeup(tty); + } + } else { + if (!(mdm_status & CyCTS)) { + /* cy_stop isn't used + because ... !!! */ + tty->hw_stopped = 1; + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) & ~CyTxRdy); + } + } + } +/* if (mdm_change & CyDSR) { + } + if (mdm_change & CyRI) { + }*/ + tty_kref_put(tty); +end: + /* end of service */ + cyy_writeb(info, CyMIR, save_xir & 0x3f); + cyy_writeb(info, CyCAR, save_car); +} + +/* The real interrupt service routine is called + whenever the card wants its hand held--chars + received, out buffer empty, modem change, etc. + */ +static irqreturn_t cyy_interrupt(int irq, void *dev_id) +{ + int status; + struct cyclades_card *cinfo = dev_id; + void __iomem *base_addr, *card_base_addr; + unsigned int chip, too_many, had_work; + int index; + + if (unlikely(cinfo == NULL)) { +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n", + irq); +#endif + return IRQ_NONE; /* spurious interrupt */ + } + + card_base_addr = cinfo->base_addr; + index = cinfo->bus_index; + + /* card was not initialized yet (e.g. DEBUG_SHIRQ) */ + if (unlikely(card_base_addr == NULL)) + return IRQ_HANDLED; + + /* This loop checks all chips in the card. Make a note whenever + _any_ chip had some work to do, as this is considered an + indication that there will be more to do. Only when no chip + has any work does this outermost loop exit. + */ + do { + had_work = 0; + for (chip = 0; chip < cinfo->num_chips; chip++) { + base_addr = cinfo->base_addr + + (cy_chip_offset[chip] << index); + too_many = 0; + while ((status = readb(base_addr + + (CySVRR << index))) != 0x00) { + had_work++; + /* The purpose of the following test is to ensure that + no chip can monopolize the driver. This forces the + chips to be checked in a round-robin fashion (after + draining each of a bunch (1000) of characters). + */ + if (1000 < too_many++) + break; + spin_lock(&cinfo->card_lock); + if (status & CySRReceive) /* rx intr */ + cyy_chip_rx(cinfo, chip, base_addr); + if (status & CySRTransmit) /* tx intr */ + cyy_chip_tx(cinfo, chip, base_addr); + if (status & CySRModem) /* modem intr */ + cyy_chip_modem(cinfo, chip, base_addr); + spin_unlock(&cinfo->card_lock); + } + } + } while (had_work); + + /* clear interrupts */ + spin_lock(&cinfo->card_lock); + cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + spin_unlock(&cinfo->card_lock); + return IRQ_HANDLED; +} /* cyy_interrupt */ + +static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set, + unsigned int clear) +{ + struct cyclades_card *card = info->card; + int channel = info->line - card->first_line; + u32 rts, dtr, msvrr, msvrd; + + channel &= 0x03; + + if (info->rtsdtr_inv) { + msvrr = CyMSVR2; + msvrd = CyMSVR1; + rts = CyDTR; + dtr = CyRTS; + } else { + msvrr = CyMSVR1; + msvrd = CyMSVR2; + rts = CyRTS; + dtr = CyDTR; + } + if (set & TIOCM_RTS) { + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, msvrr, rts); + } + if (clear & TIOCM_RTS) { + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, msvrr, ~rts); + } + if (set & TIOCM_DTR) { + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, msvrd, dtr); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + cyy_readb(info, CyMSVR1), + cyy_readb(info, CyMSVR2)); +#endif + } + if (clear & TIOCM_DTR) { + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, msvrd, ~dtr); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + cyy_readb(info, CyMSVR1), + cyy_readb(info, CyMSVR2)); +#endif + } +} + +/***********************************************************/ +/********* End of block of Cyclom-Y specific code **********/ +/******** Start of block of Cyclades-Z specific code *******/ +/***********************************************************/ + +static int +cyz_fetch_msg(struct cyclades_card *cinfo, + __u32 *channel, __u8 *cmd, __u32 *param) +{ + struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; + unsigned long loc_doorbell; + + loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell); + if (loc_doorbell) { + *cmd = (char)(0xff & loc_doorbell); + *channel = readl(&board_ctrl->fwcmd_channel); + *param = (__u32) readl(&board_ctrl->fwcmd_param); + cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff); + return 1; + } + return 0; +} /* cyz_fetch_msg */ + +static int +cyz_issue_cmd(struct cyclades_card *cinfo, + __u32 channel, __u8 cmd, __u32 param) +{ + struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; + __u32 __iomem *pci_doorbell; + unsigned int index; + + if (!cyz_is_loaded(cinfo)) + return -1; + + index = 0; + pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell; + while ((readl(pci_doorbell) & 0xff) != 0) { + if (index++ == 1000) + return (int)(readl(pci_doorbell) & 0xff); + udelay(50L); + } + cy_writel(&board_ctrl->hcmd_channel, channel); + cy_writel(&board_ctrl->hcmd_param, param); + cy_writel(pci_doorbell, (long)cmd); + + return 0; +} /* cyz_issue_cmd */ + +static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty) +{ + struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; + struct cyclades_card *cinfo = info->card; + unsigned int char_count; + int len; +#ifdef BLOCKMOVE + unsigned char *buf; +#else + char data; +#endif + __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; + + rx_get = new_rx_get = readl(&buf_ctrl->rx_get); + rx_put = readl(&buf_ctrl->rx_put); + rx_bufsize = readl(&buf_ctrl->rx_bufsize); + rx_bufaddr = readl(&buf_ctrl->rx_bufaddr); + if (rx_put >= rx_get) + char_count = rx_put - rx_get; + else + char_count = rx_put - rx_get + rx_bufsize; + + if (char_count) { +#ifdef CY_ENABLE_MONITORING + info->mon.int_count++; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; +#endif + if (tty == NULL) { + /* flush received characters */ + new_rx_get = (new_rx_get + char_count) & + (rx_bufsize - 1); + info->rflush_count++; + } else { +#ifdef BLOCKMOVE + /* we'd like to use memcpy(t, f, n) and memset(s, c, count) + for performance, but because of buffer boundaries, there + may be several steps to the operation */ + while (1) { + len = tty_prepare_flip_string(tty, &buf, + char_count); + if (!len) + break; + + len = min_t(unsigned int, min(len, char_count), + rx_bufsize - new_rx_get); + + memcpy_fromio(buf, cinfo->base_addr + + rx_bufaddr + new_rx_get, len); + + new_rx_get = (new_rx_get + len) & + (rx_bufsize - 1); + char_count -= len; + info->icount.rx += len; + info->idle_stats.recv_bytes += len; + } +#else + len = tty_buffer_request_room(tty, char_count); + while (len--) { + data = readb(cinfo->base_addr + rx_bufaddr + + new_rx_get); + new_rx_get = (new_rx_get + 1) & + (rx_bufsize - 1); + tty_insert_flip_char(tty, data, TTY_NORMAL); + info->idle_stats.recv_bytes++; + info->icount.rx++; + } +#endif +#ifdef CONFIG_CYZ_INTR + /* Recalculate the number of chars in the RX buffer and issue + a cmd in case it's higher than the RX high water mark */ + rx_put = readl(&buf_ctrl->rx_put); + if (rx_put >= rx_get) + char_count = rx_put - rx_get; + else + char_count = rx_put - rx_get + rx_bufsize; + if (char_count >= readl(&buf_ctrl->rx_threshold) && + !timer_pending(&cyz_rx_full_timer[ + info->line])) + mod_timer(&cyz_rx_full_timer[info->line], + jiffies + 1); +#endif + info->idle_stats.recv_idle = jiffies; + tty_schedule_flip(tty); + } + /* Update rx_get */ + cy_writel(&buf_ctrl->rx_get, new_rx_get); + } +} + +static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty) +{ + struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; + struct cyclades_card *cinfo = info->card; + u8 data; + unsigned int char_count; +#ifdef BLOCKMOVE + int small_count; +#endif + __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr; + + if (info->xmit_cnt <= 0) /* Nothing to transmit */ + return; + + tx_get = readl(&buf_ctrl->tx_get); + tx_put = readl(&buf_ctrl->tx_put); + tx_bufsize = readl(&buf_ctrl->tx_bufsize); + tx_bufaddr = readl(&buf_ctrl->tx_bufaddr); + if (tx_put >= tx_get) + char_count = tx_get - tx_put - 1 + tx_bufsize; + else + char_count = tx_get - tx_put - 1; + + if (char_count) { + + if (tty == NULL) + goto ztxdone; + + if (info->x_char) { /* send special char */ + data = info->x_char; + + cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); + tx_put = (tx_put + 1) & (tx_bufsize - 1); + info->x_char = 0; + char_count--; + info->icount.tx++; + } +#ifdef BLOCKMOVE + while (0 < (small_count = min_t(unsigned int, + tx_bufsize - tx_put, min_t(unsigned int, + (SERIAL_XMIT_SIZE - info->xmit_tail), + min_t(unsigned int, info->xmit_cnt, + char_count))))) { + + memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + + tx_put), + &info->port.xmit_buf[info->xmit_tail], + small_count); + + tx_put = (tx_put + small_count) & (tx_bufsize - 1); + char_count -= small_count; + info->icount.tx += small_count; + info->xmit_cnt -= small_count; + info->xmit_tail = (info->xmit_tail + small_count) & + (SERIAL_XMIT_SIZE - 1); + } +#else + while (info->xmit_cnt && char_count) { + data = info->port.xmit_buf[info->xmit_tail]; + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) & + (SERIAL_XMIT_SIZE - 1); + + cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); + tx_put = (tx_put + 1) & (tx_bufsize - 1); + char_count--; + info->icount.tx++; + } +#endif + tty_wakeup(tty); +ztxdone: + /* Update tx_put */ + cy_writel(&buf_ctrl->tx_put, tx_put); + } +} + +static void cyz_handle_cmd(struct cyclades_card *cinfo) +{ + struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; + struct tty_struct *tty; + struct cyclades_port *info; + __u32 channel, param, fw_ver; + __u8 cmd; + int special_count; + int delta_count; + + fw_ver = readl(&board_ctrl->fw_version); + + while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { + special_count = 0; + delta_count = 0; + info = &cinfo->ports[channel]; + tty = tty_port_tty_get(&info->port); + if (tty == NULL) + continue; + + switch (cmd) { + case C_CM_PR_ERROR: + tty_insert_flip_char(tty, 0, TTY_PARITY); + info->icount.rx++; + special_count++; + break; + case C_CM_FR_ERROR: + tty_insert_flip_char(tty, 0, TTY_FRAME); + info->icount.rx++; + special_count++; + break; + case C_CM_RXBRK: + tty_insert_flip_char(tty, 0, TTY_BREAK); + info->icount.rx++; + special_count++; + break; + case C_CM_MDCD: + info->icount.dcd++; + delta_count++; + if (info->port.flags & ASYNC_CHECK_CD) { + u32 dcd = fw_ver > 241 ? param : + readl(&info->u.cyz.ch_ctrl->rs_status); + if (dcd & C_RS_DCD) + wake_up_interruptible(&info->port.open_wait); + else + tty_hangup(tty); + } + break; + case C_CM_MCTS: + info->icount.cts++; + delta_count++; + break; + case C_CM_MRI: + info->icount.rng++; + delta_count++; + break; + case C_CM_MDSR: + info->icount.dsr++; + delta_count++; + break; +#ifdef Z_WAKE + case C_CM_IOCTLW: + complete(&info->shutdown_wait); + break; +#endif +#ifdef CONFIG_CYZ_INTR + case C_CM_RXHIWM: + case C_CM_RXNNDT: + case C_CM_INTBACK2: + /* Reception Interrupt */ +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, " + "port %ld\n", info->card, channel); +#endif + cyz_handle_rx(info, tty); + break; + case C_CM_TXBEMPTY: + case C_CM_TXLOWWM: + case C_CM_INTBACK: + /* Transmission Interrupt */ +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, " + "port %ld\n", info->card, channel); +#endif + cyz_handle_tx(info, tty); + break; +#endif /* CONFIG_CYZ_INTR */ + case C_CM_FATAL: + /* should do something with this !!! */ + break; + default: + break; + } + if (delta_count) + wake_up_interruptible(&info->port.delta_msr_wait); + if (special_count) + tty_schedule_flip(tty); + tty_kref_put(tty); + } +} + +#ifdef CONFIG_CYZ_INTR +static irqreturn_t cyz_interrupt(int irq, void *dev_id) +{ + struct cyclades_card *cinfo = dev_id; + + if (unlikely(!cyz_is_loaded(cinfo))) { +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " + "(IRQ%d).\n", irq); +#endif + return IRQ_NONE; + } + + /* Handle the interrupts */ + cyz_handle_cmd(cinfo); + + return IRQ_HANDLED; +} /* cyz_interrupt */ + +static void cyz_rx_restart(unsigned long arg) +{ + struct cyclades_port *info = (struct cyclades_port *)arg; + struct cyclades_card *card = info->card; + int retval; + __u32 channel = info->line - card->first_line; + unsigned long flags; + + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n", + info->line, retval); + } + spin_unlock_irqrestore(&card->card_lock, flags); +} + +#else /* CONFIG_CYZ_INTR */ + +static void cyz_poll(unsigned long arg) +{ + struct cyclades_card *cinfo; + struct cyclades_port *info; + unsigned long expires = jiffies + HZ; + unsigned int port, card; + + for (card = 0; card < NR_CARDS; card++) { + cinfo = &cy_card[card]; + + if (!cy_is_Z(cinfo)) + continue; + if (!cyz_is_loaded(cinfo)) + continue; + + /* Skip first polling cycle to avoid racing conditions with the FW */ + if (!cinfo->intr_enabled) { + cinfo->intr_enabled = 1; + continue; + } + + cyz_handle_cmd(cinfo); + + for (port = 0; port < cinfo->nports; port++) { + struct tty_struct *tty; + + info = &cinfo->ports[port]; + tty = tty_port_tty_get(&info->port); + /* OK to pass NULL to the handle functions below. + They need to drop the data in that case. */ + + if (!info->throttle) + cyz_handle_rx(info, tty); + cyz_handle_tx(info, tty); + tty_kref_put(tty); + } + /* poll every 'cyz_polling_cycle' period */ + expires = jiffies + cyz_polling_cycle; + } + mod_timer(&cyz_timerlist, expires); +} /* cyz_poll */ + +#endif /* CONFIG_CYZ_INTR */ + +/********** End of block of Cyclades-Z specific code *********/ +/***********************************************************/ + +/* This is called whenever a port becomes active; + interrupts are enabled and DTR & RTS are turned on. + */ +static int cy_startup(struct cyclades_port *info, struct tty_struct *tty) +{ + struct cyclades_card *card; + unsigned long flags; + int retval = 0; + int channel; + unsigned long page; + + card = info->card; + channel = info->line - card->first_line; + + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + spin_lock_irqsave(&card->card_lock, flags); + + if (info->port.flags & ASYNC_INITIALIZED) + goto errout; + + if (!info->type) { + set_bit(TTY_IO_ERROR, &tty->flags); + goto errout; + } + + if (info->port.xmit_buf) + free_page(page); + else + info->port.xmit_buf = (unsigned char *)page; + + spin_unlock_irqrestore(&card->card_lock, flags); + + cy_set_line_char(info, tty); + + if (!cy_is_Z(card)) { + channel &= 0x03; + + spin_lock_irqsave(&card->card_lock, flags); + + cyy_writeb(info, CyCAR, channel); + + cyy_writeb(info, CyRTPR, + (info->default_timeout ? info->default_timeout : 0x02)); + /* 10ms rx timeout */ + + cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR); + + cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0); + + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData); + } else { + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + + if (!cyz_is_loaded(card)) + return -ENODEV; + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc startup Z card %d, channel %d, " + "base_addr %p\n", card, channel, card->base_addr); +#endif + spin_lock_irqsave(&card->card_lock, flags); + + cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE); +#ifdef Z_WAKE +#ifdef CONFIG_CYZ_INTR + cy_writel(&ch_ctrl->intr_enable, + C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | + C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD); +#else + cy_writel(&ch_ctrl->intr_enable, + C_IN_IOCTLW | C_IN_MDCD); +#endif /* CONFIG_CYZ_INTR */ +#else +#ifdef CONFIG_CYZ_INTR + cy_writel(&ch_ctrl->intr_enable, + C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | + C_IN_RXNNDT | C_IN_MDCD); +#else + cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD); +#endif /* CONFIG_CYZ_INTR */ +#endif /* Z_WAKE */ + + retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was " + "%x\n", info->line, retval); + } + + /* Flush RX buffers before raising DTR and RTS */ + retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was " + "%x\n", info->line, retval); + } + + /* set timeout !!! */ + /* set RTS and DTR !!! */ + tty_port_raise_dtr_rts(&info->port); + + /* enable send, recv, modem !!! */ + } + + info->port.flags |= ASYNC_INITIALIZED; + + clear_bit(TTY_IO_ERROR, &tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + info->breakon = info->breakoff = 0; + memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); + info->idle_stats.in_use = + info->idle_stats.recv_idle = + info->idle_stats.xmit_idle = jiffies; + + spin_unlock_irqrestore(&card->card_lock, flags); + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc startup done\n"); +#endif + return 0; + +errout: + spin_unlock_irqrestore(&card->card_lock, flags); + free_page(page); + return retval; +} /* startup */ + +static void start_xmit(struct cyclades_port *info) +{ + struct cyclades_card *card = info->card; + unsigned long flags; + int channel = info->line - card->first_line; + + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { +#ifdef CONFIG_CYZ_INTR + int retval; + + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was " + "%x\n", info->line, retval); + } + spin_unlock_irqrestore(&card->card_lock, flags); +#else /* CONFIG_CYZ_INTR */ + /* Don't have to do anything at this time */ +#endif /* CONFIG_CYZ_INTR */ + } +} /* start_xmit */ + +/* + * This routine shuts down a serial port; interrupts are disabled, + * and DTR is dropped if the hangup on close termio flag is on. + */ +static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty) +{ + struct cyclades_card *card; + unsigned long flags; + int channel; + + if (!(info->port.flags & ASYNC_INITIALIZED)) + return; + + card = info->card; + channel = info->line - card->first_line; + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + + /* Clear delta_msr_wait queue to avoid mem leaks. */ + wake_up_interruptible(&info->port.delta_msr_wait); + + if (info->port.xmit_buf) { + unsigned char *temp; + temp = info->port.xmit_buf; + info->port.xmit_buf = NULL; + free_page((unsigned long)temp); + } + if (tty->termios->c_cflag & HUPCL) + cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR); + + cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR); + /* it may be appropriate to clear _XMIT at + some later date (after testing)!!! */ + + set_bit(TTY_IO_ERROR, &tty->flags); + info->port.flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&card->card_lock, flags); + } else { +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, " + "base_addr %p\n", card, channel, card->base_addr); +#endif + + if (!cyz_is_loaded(card)) + return; + + spin_lock_irqsave(&card->card_lock, flags); + + if (info->port.xmit_buf) { + unsigned char *temp; + temp = info->port.xmit_buf; + info->port.xmit_buf = NULL; + free_page((unsigned long)temp); + } + + if (tty->termios->c_cflag & HUPCL) + tty_port_lower_dtr_rts(&info->port); + + set_bit(TTY_IO_ERROR, &tty->flags); + info->port.flags &= ~ASYNC_INITIALIZED; + + spin_unlock_irqrestore(&card->card_lock, flags); + } + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc shutdown done\n"); +#endif +} /* shutdown */ + +/* + * ------------------------------------------------------------ + * cy_open() and friends + * ------------------------------------------------------------ + */ + +/* + * This routine is called whenever a serial port is opened. It + * performs the serial-specific initialization for the tty structure. + */ +static int cy_open(struct tty_struct *tty, struct file *filp) +{ + struct cyclades_port *info; + unsigned int i, line; + int retval; + + line = tty->index; + if (tty->index < 0 || NR_PORTS <= line) + return -ENODEV; + + for (i = 0; i < NR_CARDS; i++) + if (line < cy_card[i].first_line + cy_card[i].nports && + line >= cy_card[i].first_line) + break; + if (i >= NR_CARDS) + return -ENODEV; + info = &cy_card[i].ports[line - cy_card[i].first_line]; + if (info->line < 0) + return -ENODEV; + + /* If the card's firmware hasn't been loaded, + treat it as absent from the system. This + will make the user pay attention. + */ + if (cy_is_Z(info->card)) { + struct cyclades_card *cinfo = info->card; + struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; + + if (!cyz_is_loaded(cinfo)) { + if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) && + readl(&firm_id->signature) == + ZFIRM_HLT) { + printk(KERN_ERR "cyc:Cyclades-Z Error: you " + "need an external power supply for " + "this number of ports.\nFirmware " + "halted.\n"); + } else { + printk(KERN_ERR "cyc:Cyclades-Z firmware not " + "yet loaded\n"); + } + return -ENODEV; + } +#ifdef CONFIG_CYZ_INTR + else { + /* In case this Z board is operating in interrupt mode, its + interrupts should be enabled as soon as the first open + happens to one of its ports. */ + if (!cinfo->intr_enabled) { + u16 intr; + + /* Enable interrupts on the PLX chip */ + intr = readw(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat) | 0x0900; + cy_writew(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat, intr); + /* Enable interrupts on the FW */ + retval = cyz_issue_cmd(cinfo, 0, + C_CM_IRQ_ENBL, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:IRQ enable retval " + "was %x\n", retval); + } + cinfo->intr_enabled = 1; + } + } +#endif /* CONFIG_CYZ_INTR */ + /* Make sure this Z port really exists in hardware */ + if (info->line > (cinfo->first_line + cinfo->nports - 1)) + return -ENODEV; + } +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); +#endif + tty->driver_data = info; + if (serial_paranoia_check(info, tty->name, "cy_open")) + return -ENODEV; + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, + info->port.count); +#endif + info->port.count++; +#ifdef CY_DEBUG_COUNT + printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", + current->pid, info->port.count); +#endif + + /* + * If the port is the middle of closing, bail out now + */ + if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) { + wait_event_interruptible_tty(info->port.close_wait, + !(info->port.flags & ASYNC_CLOSING)); + return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; + } + + /* + * Start up serial port + */ + retval = cy_startup(info, tty); + if (retval) + return retval; + + retval = tty_port_block_til_ready(&info->port, tty, filp); + if (retval) { +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready " + "with %d\n", retval); +#endif + return retval; + } + + info->throttle = 0; + tty_port_tty_set(&info->port, tty); + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc:cy_open done\n"); +#endif + return 0; +} /* cy_open */ + +/* + * cy_wait_until_sent() --- wait until the transmitter is empty + */ +static void cy_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct cyclades_card *card; + struct cyclades_port *info = tty->driver_data; + unsigned long orig_jiffies; + int char_time; + + if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent")) + return; + + if (info->xmit_fifo_size == 0) + return; /* Just in case.... */ + + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time <= 0) + char_time = 1; + if (timeout < 0) + timeout = 0; + if (timeout) + char_time = min(char_time, timeout); + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2 * info->timeout) + timeout = 2 * info->timeout; +#ifdef CY_DEBUG_WAIT_UNTIL_SENT + printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...", + timeout, char_time, jiffies); +#endif + card = info->card; + if (!cy_is_Z(card)) { + while (cyy_readb(info, CySRER) & CyTxRdy) { +#ifdef CY_DEBUG_WAIT_UNTIL_SENT + printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies); +#endif + if (msleep_interruptible(jiffies_to_msecs(char_time))) + break; + if (timeout && time_after(jiffies, orig_jiffies + + timeout)) + break; + } + } + /* Run one more char cycle */ + msleep_interruptible(jiffies_to_msecs(char_time * 5)); +#ifdef CY_DEBUG_WAIT_UNTIL_SENT + printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies); +#endif +} + +static void cy_flush_buffer(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int channel, retval; + unsigned long flags; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) + return; + + card = info->card; + channel = info->line - card->first_line; + + spin_lock_irqsave(&card->card_lock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + spin_unlock_irqrestore(&card->card_lock, flags); + + if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board + buffers as well */ + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d " + "was %x\n", info->line, retval); + } + spin_unlock_irqrestore(&card->card_lock, flags); + } + tty_wakeup(tty); +} /* cy_flush_buffer */ + + +static void cy_do_close(struct tty_port *port) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + struct cyclades_card *card; + unsigned long flags; + int channel; + + card = info->card; + channel = info->line - card->first_line; + spin_lock_irqsave(&card->card_lock, flags); + + if (!cy_is_Z(card)) { + /* Stop accepting input */ + cyy_writeb(info, CyCAR, channel & 0x03); + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData); + if (info->port.flags & ASYNC_INITIALIZED) { + /* Waiting for on-board buffers to be empty before + closing the port */ + spin_unlock_irqrestore(&card->card_lock, flags); + cy_wait_until_sent(port->tty, info->timeout); + spin_lock_irqsave(&card->card_lock, flags); + } + } else { +#ifdef Z_WAKE + /* Waiting for on-board buffers to be empty before closing + the port */ + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + int retval; + + if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) { + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L); + if (retval != 0) { + printk(KERN_DEBUG "cyc:cy_close retval on " + "ttyC%d was %x\n", info->line, retval); + } + spin_unlock_irqrestore(&card->card_lock, flags); + wait_for_completion_interruptible(&info->shutdown_wait); + spin_lock_irqsave(&card->card_lock, flags); + } +#endif + } + spin_unlock_irqrestore(&card->card_lock, flags); + cy_shutdown(info, port->tty); +} + +/* + * This routine is called when a particular tty device is closed. + */ +static void cy_close(struct tty_struct *tty, struct file *filp) +{ + struct cyclades_port *info = tty->driver_data; + if (!info || serial_paranoia_check(info, tty->name, "cy_close")) + return; + tty_port_close(&info->port, tty, filp); +} /* cy_close */ + +/* This routine gets called when tty_write has put something into + * the write_queue. The characters may come from user space or + * kernel space. + * + * This routine will return the number of characters actually + * accepted for writing. + * + * If the port is not already transmitting stuff, start it off by + * enabling interrupts. The interrupt service routine will then + * ensure that the characters are sent. + * If the port is already active, there is no need to kick it. + * + */ +static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + int c, ret = 0; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_write")) + return 0; + + if (!info->port.xmit_buf) + return 0; + + spin_lock_irqsave(&info->card->card_lock, flags); + while (1) { + c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1)); + c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head)); + + if (c <= 0) + break; + + memcpy(info->port.xmit_buf + info->xmit_head, buf, c); + info->xmit_head = (info->xmit_head + c) & + (SERIAL_XMIT_SIZE - 1); + info->xmit_cnt += c; + buf += c; + count -= c; + ret += c; + } + spin_unlock_irqrestore(&info->card->card_lock, flags); + + info->idle_stats.xmit_bytes += ret; + info->idle_stats.xmit_idle = jiffies; + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) + start_xmit(info); + + return ret; +} /* cy_write */ + +/* + * This routine is called by the kernel to write a single + * character to the tty device. If the kernel uses this routine, + * it must call the flush_chars() routine (if defined) when it is + * done stuffing characters into the driver. If there is no room + * in the queue, the character is ignored. + */ +static int cy_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_put_char")) + return 0; + + if (!info->port.xmit_buf) + return 0; + + spin_lock_irqsave(&info->card->card_lock, flags); + if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) { + spin_unlock_irqrestore(&info->card->card_lock, flags); + return 0; + } + + info->port.xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE - 1; + info->xmit_cnt++; + info->idle_stats.xmit_bytes++; + info->idle_stats.xmit_idle = jiffies; + spin_unlock_irqrestore(&info->card->card_lock, flags); + return 1; +} /* cy_put_char */ + +/* + * This routine is called by the kernel after it has written a + * series of characters to the tty device using put_char(). + */ +static void cy_flush_chars(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) + return; + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->port.xmit_buf) + return; + + start_xmit(info); +} /* cy_flush_chars */ + +/* + * This routine returns the numbers of characters the tty driver + * will accept for queuing to be written. This number is subject + * to change as output buffers get emptied, or if the output flow + * control is activated. + */ +static int cy_write_room(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + int ret; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} /* cy_write_room */ + +static int cy_chars_in_buffer(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) + return 0; + +#ifdef Z_EXT_CHARS_IN_BUFFER + if (!cy_is_Z(info->card)) { +#endif /* Z_EXT_CHARS_IN_BUFFER */ +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", + info->line, info->xmit_cnt); +#endif + return info->xmit_cnt; +#ifdef Z_EXT_CHARS_IN_BUFFER + } else { + struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; + int char_count; + __u32 tx_put, tx_get, tx_bufsize; + + tx_get = readl(&buf_ctrl->tx_get); + tx_put = readl(&buf_ctrl->tx_put); + tx_bufsize = readl(&buf_ctrl->tx_bufsize); + if (tx_put >= tx_get) + char_count = tx_put - tx_get; + else + char_count = tx_put - tx_get + tx_bufsize; +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", + info->line, info->xmit_cnt + char_count); +#endif + return info->xmit_cnt + char_count; + } +#endif /* Z_EXT_CHARS_IN_BUFFER */ +} /* cy_chars_in_buffer */ + +/* + * ------------------------------------------------------------ + * cy_ioctl() and friends + * ------------------------------------------------------------ + */ + +static void cyy_baud_calc(struct cyclades_port *info, __u32 baud) +{ + int co, co_val, bpr; + __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : + 25000000); + + if (baud == 0) { + info->tbpr = info->tco = info->rbpr = info->rco = 0; + return; + } + + /* determine which prescaler to use */ + for (co = 4, co_val = 2048; co; co--, co_val >>= 2) { + if (cy_clock / co_val / baud > 63) + break; + } + + bpr = (cy_clock / co_val * 2 / baud + 1) / 2; + if (bpr > 255) + bpr = 255; + + info->tbpr = info->rbpr = bpr; + info->tco = info->rco = co; +} + +/* + * This routine finds or computes the various line characteristics. + * It used to be called config_setup + */ +static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty) +{ + struct cyclades_card *card; + unsigned long flags; + int channel; + unsigned cflag, iflag; + int baud, baud_rate = 0; + int i; + + if (!tty->termios) /* XXX can this happen at all? */ + return; + + if (info->line == -1) + return; + + cflag = tty->termios->c_cflag; + iflag = tty->termios->c_iflag; + + /* + * Set up the tty->alt_speed kludge + */ + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + tty->alt_speed = 57600; + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + tty->alt_speed = 115200; + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + tty->alt_speed = 230400; + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + tty->alt_speed = 460800; + + card = info->card; + channel = info->line - card->first_line; + + if (!cy_is_Z(card)) { + u32 cflags; + + /* baud rate */ + baud = tty_get_baud_rate(tty); + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + if (info->custom_divisor) + baud_rate = info->baud / info->custom_divisor; + else + baud_rate = info->baud; + } else if (baud > CD1400_MAX_SPEED) { + baud = CD1400_MAX_SPEED; + } + /* find the baud index */ + for (i = 0; i < 20; i++) { + if (baud == baud_table[i]) + break; + } + if (i == 20) + i = 19; /* CD1400_MAX_SPEED */ + + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + cyy_baud_calc(info, baud_rate); + } else { + if (info->chip_rev >= CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + info->tbpr = baud_bpr_60[i]; /* Tx BPR */ + info->tco = baud_co_60[i]; /* Tx CO */ + info->rbpr = baud_bpr_60[i]; /* Rx BPR */ + info->rco = baud_co_60[i]; /* Rx CO */ + } else { + info->tbpr = baud_bpr_25[i]; /* Tx BPR */ + info->tco = baud_co_25[i]; /* Tx CO */ + info->rbpr = baud_bpr_25[i]; /* Rx BPR */ + info->rco = baud_co_25[i]; /* Rx CO */ + } + } + if (baud_table[i] == 134) { + /* get it right for 134.5 baud */ + info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + + 2; + } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_rate) + 2; + } else if (baud_table[i]) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_table[i]) + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } + /* By tradition (is it a standard?) a baud rate of zero + implies the line should be/has been closed. A bit + later in this routine such a test is performed. */ + + /* byte size and parity */ + info->cor5 = 0; + info->cor4 = 0; + /* receive threshold */ + info->cor3 = (info->default_threshold ? + info->default_threshold : baud_cor3[i]); + info->cor2 = CyETC; + switch (cflag & CSIZE) { + case CS5: + info->cor1 = Cy_5_BITS; + break; + case CS6: + info->cor1 = Cy_6_BITS; + break; + case CS7: + info->cor1 = Cy_7_BITS; + break; + case CS8: + info->cor1 = Cy_8_BITS; + break; + } + if (cflag & CSTOPB) + info->cor1 |= Cy_2_STOP; + + if (cflag & PARENB) { + if (cflag & PARODD) + info->cor1 |= CyPARITY_O; + else + info->cor1 |= CyPARITY_E; + } else + info->cor1 |= CyPARITY_NONE; + + /* CTS flow control flag */ + if (cflag & CRTSCTS) { + info->port.flags |= ASYNC_CTS_FLOW; + info->cor2 |= CyCtsAE; + } else { + info->port.flags &= ~ASYNC_CTS_FLOW; + info->cor2 &= ~CyCtsAE; + } + if (cflag & CLOCAL) + info->port.flags &= ~ASYNC_CHECK_CD; + else + info->port.flags |= ASYNC_CHECK_CD; + + /*********************************************** + The hardware option, CyRtsAO, presents RTS when + the chip has characters to send. Since most modems + use RTS as reverse (inbound) flow control, this + option is not used. If inbound flow control is + necessary, DTR can be programmed to provide the + appropriate signals for use with a non-standard + cable. Contact Marcio Saito for details. + ***********************************************/ + + channel &= 0x03; + + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyCAR, channel); + + /* tx and rx baud rate */ + + cyy_writeb(info, CyTCOR, info->tco); + cyy_writeb(info, CyTBPR, info->tbpr); + cyy_writeb(info, CyRCOR, info->rco); + cyy_writeb(info, CyRBPR, info->rbpr); + + /* set line characteristics according configuration */ + + cyy_writeb(info, CySCHR1, START_CHAR(tty)); + cyy_writeb(info, CySCHR2, STOP_CHAR(tty)); + cyy_writeb(info, CyCOR1, info->cor1); + cyy_writeb(info, CyCOR2, info->cor2); + cyy_writeb(info, CyCOR3, info->cor3); + cyy_writeb(info, CyCOR4, info->cor4); + cyy_writeb(info, CyCOR5, info->cor5); + + cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch | + CyCOR3ch); + + /* !!! Is this needed? */ + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, CyRTPR, + (info->default_timeout ? info->default_timeout : 0x02)); + /* 10ms rx timeout */ + + cflags = CyCTS; + if (!C_CLOCAL(tty)) + cflags |= CyDSR | CyRI | CyDCD; + /* without modem intr */ + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh); + /* act on 1->0 modem transitions */ + if ((cflag & CRTSCTS) && info->rflow) + cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]); + else + cyy_writeb(info, CyMCOR1, cflags); + /* act on 0->1 modem transitions */ + cyy_writeb(info, CyMCOR2, cflags); + + if (i == 0) /* baud rate is zero, turn off line */ + cyy_change_rts_dtr(info, 0, TIOCM_DTR); + else + cyy_change_rts_dtr(info, TIOCM_DTR, 0); + + clear_bit(TTY_IO_ERROR, &tty->flags); + spin_unlock_irqrestore(&card->card_lock, flags); + + } else { + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + __u32 sw_flow; + int retval; + + if (!cyz_is_loaded(card)) + return; + + /* baud rate */ + baud = tty_get_baud_rate(tty); + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + if (info->custom_divisor) + baud_rate = info->baud / info->custom_divisor; + else + baud_rate = info->baud; + } else if (baud > CYZ_MAX_SPEED) { + baud = CYZ_MAX_SPEED; + } + cy_writel(&ch_ctrl->comm_baud, baud); + + if (baud == 134) { + /* get it right for 134.5 baud */ + info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + + 2; + } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_rate) + 2; + } else if (baud) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud) + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5); + break; + case CS6: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6); + break; + case CS7: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7); + break; + case CS8: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8); + break; + } + if (cflag & CSTOPB) { + cy_writel(&ch_ctrl->comm_data_l, + readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); + } else { + cy_writel(&ch_ctrl->comm_data_l, + readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); + } + if (cflag & PARENB) { + if (cflag & PARODD) + cy_writel(&ch_ctrl->comm_parity, C_PR_ODD); + else + cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN); + } else + cy_writel(&ch_ctrl->comm_parity, C_PR_NONE); + + /* CTS flow control flag */ + if (cflag & CRTSCTS) { + cy_writel(&ch_ctrl->hw_flow, + readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS); + } else { + cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) & + ~(C_RS_CTS | C_RS_RTS)); + } + /* As the HW flow control is done in firmware, the driver + doesn't need to care about it */ + info->port.flags &= ~ASYNC_CTS_FLOW; + + /* XON/XOFF/XANY flow control flags */ + sw_flow = 0; + if (iflag & IXON) { + sw_flow |= C_FL_OXX; + if (iflag & IXANY) + sw_flow |= C_FL_OIXANY; + } + cy_writel(&ch_ctrl->sw_flow, sw_flow); + + retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:set_line_char retval on ttyC%d " + "was %x\n", info->line, retval); + } + + /* CD sensitivity */ + if (cflag & CLOCAL) + info->port.flags &= ~ASYNC_CHECK_CD; + else + info->port.flags |= ASYNC_CHECK_CD; + + if (baud == 0) { /* baud rate is zero, turn off line */ + cy_writel(&ch_ctrl->rs_control, + readl(&ch_ctrl->rs_control) & ~C_RS_DTR); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n"); +#endif + } else { + cy_writel(&ch_ctrl->rs_control, + readl(&ch_ctrl->rs_control) | C_RS_DTR); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n"); +#endif + } + + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " + "was %x\n", info->line, retval); + } + + clear_bit(TTY_IO_ERROR, &tty->flags); + } +} /* set_line_char */ + +static int cy_get_serial_info(struct cyclades_port *info, + struct serial_struct __user *retinfo) +{ + struct cyclades_card *cinfo = info->card; + struct serial_struct tmp = { + .type = info->type, + .line = info->line, + .port = (info->card - cy_card) * 0x100 + info->line - + cinfo->first_line, + .irq = cinfo->irq, + .flags = info->port.flags, + .close_delay = info->port.close_delay, + .closing_wait = info->port.closing_wait, + .baud_base = info->baud, + .custom_divisor = info->custom_divisor, + .hub6 = 0, /*!!! */ + }; + return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; +} + +static int +cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, + struct serial_struct __user *new_info) +{ + struct serial_struct new_serial; + int ret; + + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + mutex_lock(&info->port.mutex); + if (!capable(CAP_SYS_ADMIN)) { + if (new_serial.close_delay != info->port.close_delay || + new_serial.baud_base != info->baud || + (new_serial.flags & ASYNC_FLAGS & + ~ASYNC_USR_MASK) != + (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) + { + mutex_unlock(&info->port.mutex); + return -EPERM; + } + info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK); + info->baud = new_serial.baud_base; + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud = new_serial.baud_base; + info->custom_divisor = new_serial.custom_divisor; + info->port.flags = (info->port.flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS); + info->port.close_delay = new_serial.close_delay * HZ / 100; + info->port.closing_wait = new_serial.closing_wait * HZ / 100; + +check_and_exit: + if (info->port.flags & ASYNC_INITIALIZED) { + cy_set_line_char(info, tty); + ret = 0; + } else { + ret = cy_startup(info, tty); + } + mutex_unlock(&info->port.mutex); + return ret; +} /* set_serial_info */ + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) +{ + struct cyclades_card *card = info->card; + unsigned int result; + unsigned long flags; + u8 status; + + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty); + spin_unlock_irqrestore(&card->card_lock, flags); + result = (status ? 0 : TIOCSER_TEMT); + } else { + /* Not supported yet */ + return -EINVAL; + } + return put_user(result, (unsigned long __user *)value); +} + +static int cy_tiocmget(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int result; + + if (serial_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + card = info->card; + + if (!cy_is_Z(card)) { + unsigned long flags; + int channel = info->line - card->first_line; + u8 status; + + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + status = cyy_readb(info, CyMSVR1); + status |= cyy_readb(info, CyMSVR2); + spin_unlock_irqrestore(&card->card_lock, flags); + + if (info->rtsdtr_inv) { + result = ((status & CyRTS) ? TIOCM_DTR : 0) | + ((status & CyDTR) ? TIOCM_RTS : 0); + } else { + result = ((status & CyRTS) ? TIOCM_RTS : 0) | + ((status & CyDTR) ? TIOCM_DTR : 0); + } + result |= ((status & CyDCD) ? TIOCM_CAR : 0) | + ((status & CyRI) ? TIOCM_RNG : 0) | + ((status & CyDSR) ? TIOCM_DSR : 0) | + ((status & CyCTS) ? TIOCM_CTS : 0); + } else { + u32 lstatus; + + if (!cyz_is_loaded(card)) { + result = -ENODEV; + goto end; + } + + lstatus = readl(&info->u.cyz.ch_ctrl->rs_status); + result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) | + ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) | + ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) | + ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) | + ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) | + ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); + } +end: + return result; +} /* cy_tiomget */ + +static int +cy_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + card = info->card; + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_change_rts_dtr(info, set, clear); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + int retval, channel = info->line - card->first_line; + u32 rs; + + if (!cyz_is_loaded(card)) + return -ENODEV; + + spin_lock_irqsave(&card->card_lock, flags); + rs = readl(&ch_ctrl->rs_control); + if (set & TIOCM_RTS) + rs |= C_RS_RTS; + if (clear & TIOCM_RTS) + rs &= ~C_RS_RTS; + if (set & TIOCM_DTR) { + rs |= C_RS_DTR; +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n"); +#endif + } + if (clear & TIOCM_DTR) { + rs &= ~C_RS_DTR; +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_modem_info clearing " + "Z DTR\n"); +#endif + } + cy_writel(&ch_ctrl->rs_control, rs); + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); + spin_unlock_irqrestore(&card->card_lock, flags); + if (retval != 0) { + printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d " + "was %x\n", info->line, retval); + } + } + return 0; +} + +/* + * cy_break() --- routine which turns the break handling on or off + */ +static int cy_break(struct tty_struct *tty, int break_state) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + unsigned long flags; + int retval = 0; + + if (serial_paranoia_check(info, tty->name, "cy_break")) + return -EINVAL; + + card = info->card; + + spin_lock_irqsave(&card->card_lock, flags); + if (!cy_is_Z(card)) { + /* Let the transmit ISR take care of this (since it + requires stuffing characters into the output stream). + */ + if (break_state == -1) { + if (!info->breakon) { + info->breakon = 1; + if (!info->xmit_cnt) { + spin_unlock_irqrestore(&card->card_lock, flags); + start_xmit(info); + spin_lock_irqsave(&card->card_lock, flags); + } + } + } else { + if (!info->breakoff) { + info->breakoff = 1; + if (!info->xmit_cnt) { + spin_unlock_irqrestore(&card->card_lock, flags); + start_xmit(info); + spin_lock_irqsave(&card->card_lock, flags); + } + } + } + } else { + if (break_state == -1) { + retval = cyz_issue_cmd(card, + info->line - card->first_line, + C_CM_SET_BREAK, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:cy_break (set) retval on " + "ttyC%d was %x\n", info->line, retval); + } + } else { + retval = cyz_issue_cmd(card, + info->line - card->first_line, + C_CM_CLR_BREAK, 0L); + if (retval != 0) { + printk(KERN_DEBUG "cyc:cy_break (clr) retval " + "on ttyC%d was %x\n", info->line, + retval); + } + } + } + spin_unlock_irqrestore(&card->card_lock, flags); + return retval; +} /* cy_break */ + +static int set_threshold(struct cyclades_port *info, unsigned long value) +{ + struct cyclades_card *card = info->card; + unsigned long flags; + + if (!cy_is_Z(card)) { + info->cor3 &= ~CyREC_FIFO; + info->cor3 |= value & CyREC_FIFO; + + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyCOR3, info->cor3); + cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch); + spin_unlock_irqrestore(&card->card_lock, flags); + } + return 0; +} /* set_threshold */ + +static int get_threshold(struct cyclades_port *info, + unsigned long __user *value) +{ + struct cyclades_card *card = info->card; + + if (!cy_is_Z(card)) { + u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO; + return put_user(tmp, value); + } + return 0; +} /* get_threshold */ + +static int set_timeout(struct cyclades_port *info, unsigned long value) +{ + struct cyclades_card *card = info->card; + unsigned long flags; + + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyRTPR, value & 0xff); + spin_unlock_irqrestore(&card->card_lock, flags); + } + return 0; +} /* set_timeout */ + +static int get_timeout(struct cyclades_port *info, + unsigned long __user *value) +{ + struct cyclades_card *card = info->card; + + if (!cy_is_Z(card)) { + u8 tmp = cyy_readb(info, CyRTPR); + return put_user(tmp, value); + } + return 0; +} /* get_timeout */ + +static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg, + struct cyclades_icount *cprev) +{ + struct cyclades_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&info->card->card_lock, flags); + cnow = info->icount; /* atomic copy */ + spin_unlock_irqrestore(&info->card->card_lock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +/* + * This routine allows the tty driver to implement device- + * specific ioctl's. If the ioctl number passed in cmd is + * not recognized by the driver, it should return ENOIOCTLCMD. + */ +static int +cy_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_icount cnow; /* kernel counter temps */ + int ret_val = 0; + unsigned long flags; + void __user *argp = (void __user *)arg; + + if (serial_paranoia_check(info, tty->name, "cy_ioctl")) + return -ENODEV; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", + info->line, cmd, arg); +#endif + + switch (cmd) { + case CYGETMON: + if (copy_to_user(argp, &info->mon, sizeof(info->mon))) { + ret_val = -EFAULT; + break; + } + memset(&info->mon, 0, sizeof(info->mon)); + break; + case CYGETTHRESH: + ret_val = get_threshold(info, argp); + break; + case CYSETTHRESH: + ret_val = set_threshold(info, arg); + break; + case CYGETDEFTHRESH: + ret_val = put_user(info->default_threshold, + (unsigned long __user *)argp); + break; + case CYSETDEFTHRESH: + info->default_threshold = arg & 0x0f; + break; + case CYGETTIMEOUT: + ret_val = get_timeout(info, argp); + break; + case CYSETTIMEOUT: + ret_val = set_timeout(info, arg); + break; + case CYGETDEFTIMEOUT: + ret_val = put_user(info->default_timeout, + (unsigned long __user *)argp); + break; + case CYSETDEFTIMEOUT: + info->default_timeout = arg & 0xff; + break; + case CYSETRFLOW: + info->rflow = (int)arg; + break; + case CYGETRFLOW: + ret_val = info->rflow; + break; + case CYSETRTSDTR_INV: + info->rtsdtr_inv = (int)arg; + break; + case CYGETRTSDTR_INV: + ret_val = info->rtsdtr_inv; + break; + case CYGETCD1400VER: + ret_val = info->chip_rev; + break; +#ifndef CONFIG_CYZ_INTR + case CYZSETPOLLCYCLE: + cyz_polling_cycle = (arg * HZ) / 1000; + break; + case CYZGETPOLLCYCLE: + ret_val = (cyz_polling_cycle * 1000) / HZ; + break; +#endif /* CONFIG_CYZ_INTR */ + case CYSETWAIT: + info->port.closing_wait = (unsigned short)arg * HZ / 100; + break; + case CYGETWAIT: + ret_val = info->port.closing_wait / (HZ / 100); + break; + case TIOCGSERIAL: + ret_val = cy_get_serial_info(info, argp); + break; + case TIOCSSERIAL: + ret_val = cy_set_serial_info(info, tty, argp); + break; + case TIOCSERGETLSR: /* Get line status register */ + ret_val = get_lsr_info(info, argp); + break; + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + spin_lock_irqsave(&info->card->card_lock, flags); + /* note the counters on entry */ + cnow = info->icount; + spin_unlock_irqrestore(&info->card->card_lock, flags); + ret_val = wait_event_interruptible(info->port.delta_msr_wait, + cy_cflags_changed(info, arg, &cnow)); + break; + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + default: + ret_val = -ENOIOCTLCMD; + } + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_ioctl done\n"); +#endif + return ret_val; +} /* cy_ioctl */ + +static int cy_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *sic) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_icount cnow; /* Used to snapshot */ + unsigned long flags; + + spin_lock_irqsave(&info->card->card_lock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->card->card_lock, flags); + + sic->cts = cnow.cts; + sic->dsr = cnow.dsr; + sic->rng = cnow.rng; + sic->dcd = cnow.dcd; + sic->rx = cnow.rx; + sic->tx = cnow.tx; + sic->frame = cnow.frame; + sic->overrun = cnow.overrun; + sic->parity = cnow.parity; + sic->brk = cnow.brk; + sic->buf_overrun = cnow.buf_overrun; + return 0; +} + +/* + * This routine allows the tty driver to be notified when + * device's termios settings have changed. Note that a + * well-designed tty driver should be prepared to accept the case + * where old == NULL, and try to do something rational. + */ +static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line); +#endif + + cy_set_line_char(info, tty); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + cy_start(tty); + } +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->port.open_wait); +#endif +} /* cy_set_termios */ + +/* This function is used to send a high-priority XON/XOFF character to + the device. +*/ +static void cy_send_xchar(struct tty_struct *tty, char ch) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int channel; + + if (serial_paranoia_check(info, tty->name, "cy_send_xchar")) + return; + + info->x_char = ch; + + if (ch) + cy_start(tty); + + card = info->card; + channel = info->line - card->first_line; + + if (cy_is_Z(card)) { + if (ch == STOP_CHAR(tty)) + cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); + else if (ch == START_CHAR(tty)) + cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L); + } +} + +/* This routine is called by the upper-layer tty layer to signal + that incoming characters should be throttled because the input + buffers are close to full. + */ +static void cy_throttle(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + unsigned long flags; + +#ifdef CY_DEBUG_THROTTLE + char buf[64]; + + printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty), info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_throttle")) + return; + + card = info->card; + + if (I_IXOFF(tty)) { + if (!cy_is_Z(card)) + cy_send_xchar(tty, STOP_CHAR(tty)); + else + info->throttle = 1; + } + + if (tty->termios->c_cflag & CRTSCTS) { + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_change_rts_dtr(info, 0, TIOCM_RTS); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { + info->throttle = 1; + } + } +} /* cy_throttle */ + +/* + * This routine notifies the tty driver that it should signal + * that characters can now be sent to the tty without fear of + * overrunning the input buffers of the line disciplines. + */ +static void cy_unthrottle(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + unsigned long flags; + +#ifdef CY_DEBUG_THROTTLE + char buf[64]; + + printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n", + tty_name(tty, buf), tty_chars_in_buffer(tty), info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + cy_send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) { + card = info->card; + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_change_rts_dtr(info, TIOCM_RTS, 0); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { + info->throttle = 0; + } + } +} /* cy_unthrottle */ + +/* cy_start and cy_stop provide software output flow control as a + function of XON/XOFF, software CTS, and other such stuff. +*/ +static void cy_stop(struct tty_struct *tty) +{ + struct cyclades_card *cinfo; + struct cyclades_port *info = tty->driver_data; + int channel; + unsigned long flags; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_stop")) + return; + + cinfo = info->card; + channel = info->line - cinfo->first_line; + if (!cy_is_Z(cinfo)) { + spin_lock_irqsave(&cinfo->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy); + spin_unlock_irqrestore(&cinfo->card_lock, flags); + } +} /* cy_stop */ + +static void cy_start(struct tty_struct *tty) +{ + struct cyclades_card *cinfo; + struct cyclades_port *info = tty->driver_data; + int channel; + unsigned long flags; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_start")) + return; + + cinfo = info->card; + channel = info->line - cinfo->first_line; + if (!cy_is_Z(cinfo)) { + spin_lock_irqsave(&cinfo->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy); + spin_unlock_irqrestore(&cinfo->card_lock, flags); + } +} /* cy_start */ + +/* + * cy_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void cy_hangup(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_hangup")) + return; + + cy_flush_buffer(tty); + cy_shutdown(info, tty); + tty_port_hangup(&info->port); +} /* cy_hangup */ + +static int cyy_carrier_raised(struct tty_port *port) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + struct cyclades_card *cinfo = info->card; + unsigned long flags; + int channel = info->line - cinfo->first_line; + u32 cd; + + spin_lock_irqsave(&cinfo->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + cd = cyy_readb(info, CyMSVR1) & CyDCD; + spin_unlock_irqrestore(&cinfo->card_lock, flags); + + return cd; +} + +static void cyy_dtr_rts(struct tty_port *port, int raise) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + struct cyclades_card *cinfo = info->card; + unsigned long flags; + + spin_lock_irqsave(&cinfo->card_lock, flags); + cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0, + raise ? 0 : TIOCM_RTS | TIOCM_DTR); + spin_unlock_irqrestore(&cinfo->card_lock, flags); +} + +static int cyz_carrier_raised(struct tty_port *port) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + + return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD; +} + +static void cyz_dtr_rts(struct tty_port *port, int raise) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + struct cyclades_card *cinfo = info->card; + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + int ret, channel = info->line - cinfo->first_line; + u32 rs; + + rs = readl(&ch_ctrl->rs_control); + if (raise) + rs |= C_RS_RTS | C_RS_DTR; + else + rs &= ~(C_RS_RTS | C_RS_DTR); + cy_writel(&ch_ctrl->rs_control, rs); + ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L); + if (ret != 0) + printk(KERN_ERR "%s: retval on ttyC%d was %x\n", + __func__, info->line, ret); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "%s: raising Z DTR\n", __func__); +#endif +} + +static const struct tty_port_operations cyy_port_ops = { + .carrier_raised = cyy_carrier_raised, + .dtr_rts = cyy_dtr_rts, + .shutdown = cy_do_close, +}; + +static const struct tty_port_operations cyz_port_ops = { + .carrier_raised = cyz_carrier_raised, + .dtr_rts = cyz_dtr_rts, + .shutdown = cy_do_close, +}; + +/* + * --------------------------------------------------------------------- + * cy_init() and friends + * + * cy_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +static int __devinit cy_init_card(struct cyclades_card *cinfo) +{ + struct cyclades_port *info; + unsigned int channel, port; + + spin_lock_init(&cinfo->card_lock); + cinfo->intr_enabled = 0; + + cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports), + GFP_KERNEL); + if (cinfo->ports == NULL) { + printk(KERN_ERR "Cyclades: cannot allocate ports\n"); + return -ENOMEM; + } + + for (channel = 0, port = cinfo->first_line; channel < cinfo->nports; + channel++, port++) { + info = &cinfo->ports[channel]; + tty_port_init(&info->port); + info->magic = CYCLADES_MAGIC; + info->card = cinfo; + info->line = port; + + info->port.closing_wait = CLOSING_WAIT_DELAY; + info->port.close_delay = 5 * HZ / 10; + info->port.flags = STD_COM_FLAGS; + init_completion(&info->shutdown_wait); + + if (cy_is_Z(cinfo)) { + struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS; + struct ZFW_CTRL *zfw_ctrl; + + info->port.ops = &cyz_port_ops; + info->type = PORT_STARTECH; + + zfw_ctrl = cinfo->base_addr + + (readl(&firm_id->zfwctrl_addr) & 0xfffff); + info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel]; + info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; + + if (cinfo->hw_ver == ZO_V1) + info->xmit_fifo_size = CYZ_FIFO_SIZE; + else + info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; +#ifdef CONFIG_CYZ_INTR + setup_timer(&cyz_rx_full_timer[port], + cyz_rx_restart, (unsigned long)info); +#endif + } else { + unsigned short chip_number; + int index = cinfo->bus_index; + + info->port.ops = &cyy_port_ops; + info->type = PORT_CIRRUS; + info->xmit_fifo_size = CyMAX_CHAR_FIFO; + info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; + info->cor2 = CyETC; + info->cor3 = 0x08; /* _very_ small rcv threshold */ + + chip_number = channel / CyPORTS_PER_CHIP; + info->u.cyy.base_addr = cinfo->base_addr + + (cy_chip_offset[chip_number] << index); + info->chip_rev = cyy_readb(info, CyGFRCR); + + if (info->chip_rev >= CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + info->tbpr = baud_bpr_60[13]; /* Tx BPR */ + info->tco = baud_co_60[13]; /* Tx CO */ + info->rbpr = baud_bpr_60[13]; /* Rx BPR */ + info->rco = baud_co_60[13]; /* Rx CO */ + info->rtsdtr_inv = 1; + } else { + info->tbpr = baud_bpr_25[13]; /* Tx BPR */ + info->tco = baud_co_25[13]; /* Tx CO */ + info->rbpr = baud_bpr_25[13]; /* Rx BPR */ + info->rco = baud_co_25[13]; /* Rx CO */ + info->rtsdtr_inv = 0; + } + info->read_status_mask = CyTIMEOUT | CySPECHAR | + CyBREAK | CyPARITY | CyFRAME | CyOVERRUN; + } + + } + +#ifndef CONFIG_CYZ_INTR + if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) { + mod_timer(&cyz_timerlist, jiffies + 1); +#ifdef CY_PCI_DEBUG + printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); +#endif + } +#endif + return 0; +} + +/* initialize chips on Cyclom-Y card -- return number of valid + chips (which is number of ports/4) */ +static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr, + int index) +{ + unsigned int chip_number; + void __iomem *base_addr; + + cy_writeb(true_base_addr + (Cy_HwReset << index), 0); + /* Cy_HwReset is 0x1400 */ + cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + udelay(500L); + + for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; + chip_number++) { + base_addr = + true_base_addr + (cy_chip_offset[chip_number] << index); + mdelay(1); + if (readb(base_addr + (CyCCR << index)) != 0x00) { + /************* + printk(" chip #%d at %#6lx is never idle (CCR != 0)\n", + chip_number, (unsigned long)base_addr); + *************/ + return chip_number; + } + + cy_writeb(base_addr + (CyGFRCR << index), 0); + udelay(10L); + + /* The Cyclom-16Y does not decode address bit 9 and therefore + cannot distinguish between references to chip 0 and a non- + existent chip 4. If the preceding clearing of the supposed + chip 4 GFRCR register appears at chip 0, there is no chip 4 + and this must be a Cyclom-16Y, not a Cyclom-32Ye. + */ + if (chip_number == 4 && readb(true_base_addr + + (cy_chip_offset[0] << index) + + (CyGFRCR << index)) == 0) { + return chip_number; + } + + cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET); + mdelay(1); + + if (readb(base_addr + (CyGFRCR << index)) == 0x00) { + /* + printk(" chip #%d at %#6lx is not responding ", + chip_number, (unsigned long)base_addr); + printk("(GFRCR stayed 0)\n", + */ + return chip_number; + } + if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) != + 0x40) { + /* + printk(" chip #%d at %#6lx is not valid (GFRCR == " + "%#2x)\n", + chip_number, (unsigned long)base_addr, + base_addr[CyGFRCR<= CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + /* Impossible to reach 5ms with this chip. + Changed to 2ms instead (f = 500 Hz). */ + cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS); + } else { + /* f = 200 Hz */ + cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS); + } + + /* + printk(" chip #%d at %#6lx is rev 0x%2x\n", + chip_number, (unsigned long)base_addr, + readb(base_addr+(CyGFRCR< NR_PORTS) { + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " + "more channels are available. Change NR_PORTS " + "in cyclades.c and recompile kernel.\n", + (unsigned long)cy_isa_address); + iounmap(cy_isa_address); + return nboard; + } + /* fill the next cy_card structure available */ + for (j = 0; j < NR_CARDS; j++) { + if (cy_card[j].base_addr == NULL) + break; + } + if (j == NR_CARDS) { /* no more cy_cards available */ + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " + "more cards can be used. Change NR_CARDS in " + "cyclades.c and recompile kernel.\n", + (unsigned long)cy_isa_address); + iounmap(cy_isa_address); + return nboard; + } + + /* allocate IRQ */ + if (request_irq(cy_isa_irq, cyy_interrupt, + IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) { + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " + "could not allocate IRQ#%d.\n", + (unsigned long)cy_isa_address, cy_isa_irq); + iounmap(cy_isa_address); + return nboard; + } + + /* set cy_card */ + cy_card[j].base_addr = cy_isa_address; + cy_card[j].ctl_addr.p9050 = NULL; + cy_card[j].irq = (int)cy_isa_irq; + cy_card[j].bus_index = 0; + cy_card[j].first_line = cy_next_channel; + cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; + cy_card[j].nports = cy_isa_nchan; + if (cy_init_card(&cy_card[j])) { + cy_card[j].base_addr = NULL; + free_irq(cy_isa_irq, &cy_card[j]); + iounmap(cy_isa_address); + continue; + } + nboard++; + + printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " + "%d channels starting from port %d\n", + j + 1, (unsigned long)cy_isa_address, + (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), + cy_isa_irq, cy_isa_nchan, cy_next_channel); + + for (j = cy_next_channel; + j < cy_next_channel + cy_isa_nchan; j++) + tty_register_device(cy_serial_driver, j, NULL); + cy_next_channel += cy_isa_nchan; + } + return nboard; +#else + return 0; +#endif /* CONFIG_ISA */ +} /* cy_detect_isa */ + +#ifdef CONFIG_PCI +static inline int __devinit cyc_isfwstr(const char *str, unsigned int size) +{ + unsigned int a; + + for (a = 0; a < size && *str; a++, str++) + if (*str & 0x80) + return -EINVAL; + + for (; a < size; a++, str++) + if (*str) + return -EINVAL; + + return 0; +} + +static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data, + unsigned int size) +{ + for (; size > 0; size--) { + cy_writel(fpga, *data++); + udelay(10); + } +} + +static void __devinit plx_init(struct pci_dev *pdev, int irq, + struct RUNTIME_9060 __iomem *addr) +{ + /* Reset PLX */ + cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000); + udelay(100L); + cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000); + + /* Reload Config. Registers from EEPROM */ + cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000); + udelay(100L); + cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000); + + /* For some yet unknown reason, once the PLX9060 reloads the EEPROM, + * the IRQ is lost and, thus, we have to re-write it to the PCI config. + * registers. This will remain here until we find a permanent fix. + */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); +} + +static int __devinit __cyz_load_fw(const struct firmware *fw, + const char *name, const u32 mailbox, void __iomem *base, + void __iomem *fpga) +{ + const void *ptr = fw->data; + const struct zfile_header *h = ptr; + const struct zfile_config *c, *cs; + const struct zfile_block *b, *bs; + unsigned int a, tmp, len = fw->size; +#define BAD_FW KERN_ERR "Bad firmware: " + if (len < sizeof(*h)) { + printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h)); + return -EINVAL; + } + + cs = ptr + h->config_offset; + bs = ptr + h->block_offset; + + if ((void *)(cs + h->n_config) > ptr + len || + (void *)(bs + h->n_blocks) > ptr + len) { + printk(BAD_FW "too short"); + return -EINVAL; + } + + if (cyc_isfwstr(h->name, sizeof(h->name)) || + cyc_isfwstr(h->date, sizeof(h->date))) { + printk(BAD_FW "bad formatted header string\n"); + return -EINVAL; + } + + if (strncmp(name, h->name, sizeof(h->name))) { + printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name); + return -EINVAL; + } + + tmp = 0; + for (c = cs; c < cs + h->n_config; c++) { + for (a = 0; a < c->n_blocks; a++) + if (c->block_list[a] > h->n_blocks) { + printk(BAD_FW "bad block ref number in cfgs\n"); + return -EINVAL; + } + if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */ + tmp++; + } + if (!tmp) { + printk(BAD_FW "nothing appropriate\n"); + return -EINVAL; + } + + for (b = bs; b < bs + h->n_blocks; b++) + if (b->file_offset + b->size > len) { + printk(BAD_FW "bad block data offset\n"); + return -EINVAL; + } + + /* everything is OK, let's seek'n'load it */ + for (c = cs; c < cs + h->n_config; c++) + if (c->mailbox == mailbox && c->function == 0) + break; + + for (a = 0; a < c->n_blocks; a++) { + b = &bs[c->block_list[a]]; + if (b->type == ZBLOCK_FPGA) { + if (fpga != NULL) + cyz_fpga_copy(fpga, ptr + b->file_offset, + b->size); + } else { + if (base != NULL) + memcpy_toio(base + b->ram_offset, + ptr + b->file_offset, b->size); + } + } +#undef BAD_FW + return 0; +} + +static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, + struct RUNTIME_9060 __iomem *ctl_addr, int irq) +{ + const struct firmware *fw; + struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS; + struct CUSTOM_REG __iomem *cust = base_addr; + struct ZFW_CTRL __iomem *pt_zfwctrl; + void __iomem *tmp; + u32 mailbox, status, nchan; + unsigned int i; + int retval; + + retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev); + if (retval) { + dev_err(&pdev->dev, "can't get firmware\n"); + goto err; + } + + /* Check whether the firmware is already loaded and running. If + positive, skip this board */ + if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { + u32 cntval = readl(base_addr + 0x190); + + udelay(100); + if (cntval != readl(base_addr + 0x190)) { + /* FW counter is working, FW is running */ + dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. " + "Skipping board.\n"); + retval = 0; + goto err_rel; + } + } + + /* start boot */ + cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) & + ~0x00030800UL); + + mailbox = readl(&ctl_addr->mail_box_0); + + if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) { + /* stops CPU and set window to beginning of RAM */ + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + cy_writel(&cust->cpu_stop, 0); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + udelay(100); + } + + plx_init(pdev, irq, ctl_addr); + + if (mailbox != 0) { + /* load FPGA */ + retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL, + base_addr); + if (retval) + goto err_rel; + if (!__cyz_fpga_loaded(ctl_addr)) { + dev_err(&pdev->dev, "fw upload successful, but fw is " + "not loaded\n"); + goto err_rel; + } + } + + /* stops CPU and set window to beginning of RAM */ + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + cy_writel(&cust->cpu_stop, 0); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + udelay(100); + + /* clear memory */ + for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) + cy_writeb(tmp, 255); + if (mailbox != 0) { + /* set window to last 512K of RAM */ + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE); + for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) + cy_writeb(tmp, 255); + /* set window to beginning of RAM */ + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + } + + retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL); + release_firmware(fw); + if (retval) + goto err; + + /* finish boot and start boards */ + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + cy_writel(&cust->cpu_start, 0); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + i = 0; + while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40) + msleep(100); + if (status != ZFIRM_ID) { + if (status == ZFIRM_HLT) { + dev_err(&pdev->dev, "you need an external power supply " + "for this number of ports. Firmware halted and " + "board reset.\n"); + retval = -EIO; + goto err; + } + dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting " + "some more time\n", status); + while ((status = readl(&fid->signature)) != ZFIRM_ID && + i++ < 200) + msleep(100); + if (status != ZFIRM_ID) { + dev_err(&pdev->dev, "Board not started in 20 seconds! " + "Giving up. (fid->signature = 0x%x)\n", + status); + dev_info(&pdev->dev, "*** Warning ***: if you are " + "upgrading the FW, please power cycle the " + "system before loading the new FW to the " + "Cyclades-Z.\n"); + + if (__cyz_fpga_loaded(ctl_addr)) + plx_init(pdev, irq, ctl_addr); + + retval = -EIO; + goto err; + } + dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n", + i / 10); + } + pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr); + + dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n", + base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr), + base_addr + readl(&fid->zfwctrl_addr)); + + nchan = readl(&pt_zfwctrl->board_ctrl.n_channel); + dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n", + readl(&pt_zfwctrl->board_ctrl.fw_version), nchan); + + if (nchan == 0) { + dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please " + "check the connection between the Z host card and the " + "serial expanders.\n"); + + if (__cyz_fpga_loaded(ctl_addr)) + plx_init(pdev, irq, ctl_addr); + + dev_info(&pdev->dev, "Null number of ports detected. Board " + "reset.\n"); + retval = 0; + goto err; + } + + cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX); + cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION); + + /* + Early firmware failed to start looking for commands. + This enables firmware interrupts for those commands. + */ + cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | + (1 << 17)); + cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | + 0x00030800UL); + + return nchan; +err_rel: + release_firmware(fw); +err: + return retval; +} + +static int __devinit cy_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + void __iomem *addr0 = NULL, *addr2 = NULL; + char *card_name = NULL; + u32 uninitialized_var(mailbox); + unsigned int device_id, nchan = 0, card_no, i; + unsigned char plx_ver; + int retval, irq; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "cannot enable device\n"); + goto err; + } + + /* read PCI configuration area */ + irq = pdev->irq; + device_id = pdev->device & ~PCI_DEVICE_ID_MASK; + +#if defined(__alpha__) + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ + dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low " + "addresses on Alpha systems.\n"); + retval = -EIO; + goto err_dis; + } +#endif + if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { + dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low " + "addresses\n"); + retval = -EIO; + goto err_dis; + } + + if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { + dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring " + "it...\n"); + pdev->resource[2].flags &= ~IORESOURCE_IO; + } + + retval = pci_request_regions(pdev, "cyclades"); + if (retval) { + dev_err(&pdev->dev, "failed to reserve resources\n"); + goto err_dis; + } + + retval = -EIO; + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + card_name = "Cyclom-Y"; + + addr0 = ioremap_nocache(pci_resource_start(pdev, 0), + CyPCI_Yctl); + if (addr0 == NULL) { + dev_err(&pdev->dev, "can't remap ctl region\n"); + goto err_reg; + } + addr2 = ioremap_nocache(pci_resource_start(pdev, 2), + CyPCI_Ywin); + if (addr2 == NULL) { + dev_err(&pdev->dev, "can't remap base region\n"); + goto err_unmap; + } + + nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1); + if (nchan == 0) { + dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " + "Serial-Modules\n"); + goto err_unmap; + } + } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { + struct RUNTIME_9060 __iomem *ctl_addr; + + ctl_addr = addr0 = ioremap_nocache(pci_resource_start(pdev, 0), + CyPCI_Zctl); + if (addr0 == NULL) { + dev_err(&pdev->dev, "can't remap ctl region\n"); + goto err_reg; + } + + /* Disable interrupts on the PLX before resetting it */ + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) & ~0x0900); + + plx_init(pdev, irq, addr0); + + mailbox = readl(&ctl_addr->mail_box_0); + + addr2 = ioremap_nocache(pci_resource_start(pdev, 2), + mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin); + if (addr2 == NULL) { + dev_err(&pdev->dev, "can't remap base region\n"); + goto err_unmap; + } + + if (mailbox == ZE_V1) { + card_name = "Cyclades-Ze"; + } else { + card_name = "Cyclades-8Zo"; +#ifdef CY_PCI_DEBUG + if (mailbox == ZO_V1) { + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA " + "id %lx, ver %lx\n", (ulong)(0xff & + readl(&((struct CUSTOM_REG *)addr2)-> + fpga_id)), (ulong)(0xff & + readl(&((struct CUSTOM_REG *)addr2)-> + fpga_version))); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + } else { + dev_info(&pdev->dev, "Cyclades-Z/PCI: New " + "Cyclades-Z board. FPGA not loaded\n"); + } +#endif + /* The following clears the firmware id word. This + ensures that the driver will not attempt to talk to + the board until it has been properly initialized. + */ + if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) + cy_writel(addr2 + ID_ADDRESS, 0L); + } + + retval = cyz_load_fw(pdev, addr2, addr0, irq); + if (retval <= 0) + goto err_unmap; + nchan = retval; + } + + if ((cy_next_channel + nchan) > NR_PORTS) { + dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " + "channels are available. Change NR_PORTS in " + "cyclades.c and recompile kernel.\n"); + goto err_unmap; + } + /* fill the next cy_card structure available */ + for (card_no = 0; card_no < NR_CARDS; card_no++) { + if (cy_card[card_no].base_addr == NULL) + break; + } + if (card_no == NR_CARDS) { /* no more cy_cards available */ + dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " + "more cards can be used. Change NR_CARDS in " + "cyclades.c and recompile kernel.\n"); + goto err_unmap; + } + + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + /* allocate IRQ */ + retval = request_irq(irq, cyy_interrupt, + IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]); + if (retval) { + dev_err(&pdev->dev, "could not allocate IRQ\n"); + goto err_unmap; + } + cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP; + } else { + struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS; + struct ZFW_CTRL __iomem *zfw_ctrl; + + zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff); + + cy_card[card_no].hw_ver = mailbox; + cy_card[card_no].num_chips = (unsigned int)-1; + cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl; +#ifdef CONFIG_CYZ_INTR + /* allocate IRQ only if board has an IRQ */ + if (irq != 0 && irq != 255) { + retval = request_irq(irq, cyz_interrupt, + IRQF_SHARED, "Cyclades-Z", + &cy_card[card_no]); + if (retval) { + dev_err(&pdev->dev, "could not allocate IRQ\n"); + goto err_unmap; + } + } +#endif /* CONFIG_CYZ_INTR */ + } + + /* set cy_card */ + cy_card[card_no].base_addr = addr2; + cy_card[card_no].ctl_addr.p9050 = addr0; + cy_card[card_no].irq = irq; + cy_card[card_no].bus_index = 1; + cy_card[card_no].first_line = cy_next_channel; + cy_card[card_no].nports = nchan; + retval = cy_init_card(&cy_card[card_no]); + if (retval) + goto err_null; + + pci_set_drvdata(pdev, &cy_card[card_no]); + + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + /* enable interrupts in the PCI interface */ + plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; + switch (plx_ver) { + case PLX_9050: + cy_writeb(addr0 + 0x4c, 0x43); + break; + + case PLX_9060: + case PLX_9080: + default: /* Old boards, use PLX_9060 */ + { + struct RUNTIME_9060 __iomem *ctl_addr = addr0; + plx_init(pdev, irq, ctl_addr); + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) | 0x0900); + break; + } + } + } + + dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " + "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); + for (i = cy_next_channel; i < cy_next_channel + nchan; i++) + tty_register_device(cy_serial_driver, i, &pdev->dev); + cy_next_channel += nchan; + + return 0; +err_null: + cy_card[card_no].base_addr = NULL; + free_irq(irq, &cy_card[card_no]); +err_unmap: + iounmap(addr0); + if (addr2) + iounmap(addr2); +err_reg: + pci_release_regions(pdev); +err_dis: + pci_disable_device(pdev); +err: + return retval; +} + +static void __devexit cy_pci_remove(struct pci_dev *pdev) +{ + struct cyclades_card *cinfo = pci_get_drvdata(pdev); + unsigned int i; + + /* non-Z with old PLX */ + if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == + PLX_9050) + cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); + else +#ifndef CONFIG_CYZ_INTR + if (!cy_is_Z(cinfo)) +#endif + cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, + readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & + ~0x0900); + + iounmap(cinfo->base_addr); + if (cinfo->ctl_addr.p9050) + iounmap(cinfo->ctl_addr.p9050); + if (cinfo->irq +#ifndef CONFIG_CYZ_INTR + && !cy_is_Z(cinfo) +#endif /* CONFIG_CYZ_INTR */ + ) + free_irq(cinfo->irq, cinfo); + pci_release_regions(pdev); + + cinfo->base_addr = NULL; + for (i = cinfo->first_line; i < cinfo->first_line + + cinfo->nports; i++) + tty_unregister_device(cy_serial_driver, i); + cinfo->nports = 0; + kfree(cinfo->ports); +} + +static struct pci_driver cy_pci_driver = { + .name = "cyclades", + .id_table = cy_pci_dev_id, + .probe = cy_pci_probe, + .remove = __devexit_p(cy_pci_remove) +}; +#endif + +static int cyclades_proc_show(struct seq_file *m, void *v) +{ + struct cyclades_port *info; + unsigned int i, j; + __u32 cur_jifs = jiffies; + + seq_puts(m, "Dev TimeOpen BytesOut IdleOut BytesIn " + "IdleIn Overruns Ldisc\n"); + + /* Output one line for each known port */ + for (i = 0; i < NR_CARDS; i++) + for (j = 0; j < cy_card[i].nports; j++) { + info = &cy_card[i].ports[j]; + + if (info->port.count) { + /* XXX is the ldisc num worth this? */ + struct tty_struct *tty; + struct tty_ldisc *ld; + int num = 0; + tty = tty_port_tty_get(&info->port); + if (tty) { + ld = tty_ldisc_ref(tty); + if (ld) { + num = ld->ops->num; + tty_ldisc_deref(ld); + } + tty_kref_put(tty); + } + seq_printf(m, "%3d %8lu %10lu %8lu " + "%10lu %8lu %9lu %6d\n", info->line, + (cur_jifs - info->idle_stats.in_use) / + HZ, info->idle_stats.xmit_bytes, + (cur_jifs - info->idle_stats.xmit_idle)/ + HZ, info->idle_stats.recv_bytes, + (cur_jifs - info->idle_stats.recv_idle)/ + HZ, info->idle_stats.overruns, + num); + } else + seq_printf(m, "%3d %8lu %10lu %8lu " + "%10lu %8lu %9lu %6ld\n", + info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); + } + return 0; +} + +static int cyclades_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, cyclades_proc_show, NULL); +} + +static const struct file_operations cyclades_proc_fops = { + .owner = THIS_MODULE, + .open = cyclades_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* The serial driver boot-time initialization code! + Hardware I/O ports are mapped to character special devices on a + first found, first allocated manner. That is, this code searches + for Cyclom cards in the system. As each is found, it is probed + to discover how many chips (and thus how many ports) are present. + These ports are mapped to the tty ports 32 and upward in monotonic + fashion. If an 8-port card is replaced with a 16-port card, the + port mapping on a following card will shift. + + This approach is different from what is used in the other serial + device driver because the Cyclom is more properly a multiplexer, + not just an aggregation of serial ports on one card. + + If there are more cards with more ports than have been + statically allocated above, a warning is printed and the + extra ports are ignored. + */ + +static const struct tty_operations cy_ops = { + .open = cy_open, + .close = cy_close, + .write = cy_write, + .put_char = cy_put_char, + .flush_chars = cy_flush_chars, + .write_room = cy_write_room, + .chars_in_buffer = cy_chars_in_buffer, + .flush_buffer = cy_flush_buffer, + .ioctl = cy_ioctl, + .throttle = cy_throttle, + .unthrottle = cy_unthrottle, + .set_termios = cy_set_termios, + .stop = cy_stop, + .start = cy_start, + .hangup = cy_hangup, + .break_ctl = cy_break, + .wait_until_sent = cy_wait_until_sent, + .tiocmget = cy_tiocmget, + .tiocmset = cy_tiocmset, + .get_icount = cy_get_icount, + .proc_fops = &cyclades_proc_fops, +}; + +static int __init cy_init(void) +{ + unsigned int nboards; + int retval = -ENOMEM; + + cy_serial_driver = alloc_tty_driver(NR_PORTS); + if (!cy_serial_driver) + goto err; + + printk(KERN_INFO "Cyclades driver " CY_VERSION " (built %s %s)\n", + __DATE__, __TIME__); + + /* Initialize the tty_driver structure */ + + cy_serial_driver->owner = THIS_MODULE; + cy_serial_driver->driver_name = "cyclades"; + cy_serial_driver->name = "ttyC"; + cy_serial_driver->major = CYCLADES_MAJOR; + cy_serial_driver->minor_start = 0; + cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; + cy_serial_driver->init_termios = tty_std_termios; + cy_serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(cy_serial_driver, &cy_ops); + + retval = tty_register_driver(cy_serial_driver); + if (retval) { + printk(KERN_ERR "Couldn't register Cyclades serial driver\n"); + goto err_frtty; + } + + /* the code below is responsible to find the boards. Each different + type of board has its own detection routine. If a board is found, + the next cy_card structure available is set by the detection + routine. These functions are responsible for checking the + availability of cy_card and cy_port data structures and updating + the cy_next_channel. */ + + /* look for isa boards */ + nboards = cy_detect_isa(); + +#ifdef CONFIG_PCI + /* look for pci boards */ + retval = pci_register_driver(&cy_pci_driver); + if (retval && !nboards) { + tty_unregister_driver(cy_serial_driver); + goto err_frtty; + } +#endif + + return 0; +err_frtty: + put_tty_driver(cy_serial_driver); +err: + return retval; +} /* cy_init */ + +static void __exit cy_cleanup_module(void) +{ + struct cyclades_card *card; + unsigned int i, e1; + +#ifndef CONFIG_CYZ_INTR + del_timer_sync(&cyz_timerlist); +#endif /* CONFIG_CYZ_INTR */ + + e1 = tty_unregister_driver(cy_serial_driver); + if (e1) + printk(KERN_ERR "failed to unregister Cyclades serial " + "driver(%d)\n", e1); + +#ifdef CONFIG_PCI + pci_unregister_driver(&cy_pci_driver); +#endif + + for (i = 0; i < NR_CARDS; i++) { + card = &cy_card[i]; + if (card->base_addr) { + /* clear interrupt */ + cy_writeb(card->base_addr + Cy_ClrIntr, 0); + iounmap(card->base_addr); + if (card->ctl_addr.p9050) + iounmap(card->ctl_addr.p9050); + if (card->irq +#ifndef CONFIG_CYZ_INTR + && !cy_is_Z(card) +#endif /* CONFIG_CYZ_INTR */ + ) + free_irq(card->irq, card); + for (e1 = card->first_line; e1 < card->first_line + + card->nports; e1++) + tty_unregister_device(cy_serial_driver, e1); + kfree(card->ports); + } + } + + put_tty_driver(cy_serial_driver); +} /* cy_cleanup_module */ + +module_init(cy_init); +module_exit(cy_cleanup_module); + +MODULE_LICENSE("GPL"); +MODULE_VERSION(CY_VERSION); +MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR); +MODULE_FIRMWARE("cyzfirm.bin"); diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c new file mode 100644 index 000000000000..db1cf9c328d8 --- /dev/null +++ b/drivers/tty/isicom.c @@ -0,0 +1,1736 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Original driver code supplied by Multi-Tech + * + * Changes + * 1/9/98 alan@lxorguk.ukuu.org.uk + * Merge to 2.0.x kernel tree + * Obtain and use official major/minors + * Loader switched to a misc device + * (fixed range check bug as a side effect) + * Printk clean up + * 9/12/98 alan@lxorguk.ukuu.org.uk + * Rough port to 2.1.x + * + * 10/6/99 sameer Merged the ISA and PCI drivers to + * a new unified driver. + * + * 3/9/99 sameer Added support for ISI4616 cards. + * + * 16/9/99 sameer We do not force RTS low anymore. + * This is to prevent the firmware + * from getting confused. + * + * 26/10/99 sameer Cosmetic changes:The driver now + * dumps the Port Count information + * along with I/O address and IRQ. + * + * 13/12/99 sameer Fixed the problem with IRQ sharing. + * + * 10/5/00 sameer Fixed isicom_shutdown_board() + * to not lower DTR on all the ports + * when the last port on the card is + * closed. + * + * 10/5/00 sameer Signal mask setup command added + * to isicom_setup_port and + * isicom_shutdown_port. + * + * 24/5/00 sameer The driver is now SMP aware. + * + * + * 27/11/00 Vinayak P Risbud Fixed the Driver Crash Problem + * + * + * 03/01/01 anil .s Added support for resetting the + * internal modems on ISI cards. + * + * 08/02/01 anil .s Upgraded the driver for kernel + * 2.4.x + * + * 11/04/01 Kevin Fixed firmware load problem with + * ISIHP-4X card + * + * 30/04/01 anil .s Fixed the remote login through + * ISI port problem. Now the link + * does not go down before password + * prompt. + * + * 03/05/01 anil .s Fixed the problem with IRQ sharing + * among ISI-PCI cards. + * + * 03/05/01 anil .s Added support to display the version + * info during insmod as well as module + * listing by lsmod. + * + * 10/05/01 anil .s Done the modifications to the source + * file and Install script so that the + * same installation can be used for + * 2.2.x and 2.4.x kernel. + * + * 06/06/01 anil .s Now we drop both dtr and rts during + * shutdown_port as well as raise them + * during isicom_config_port. + * + * 09/06/01 acme@conectiva.com.br use capable, not suser, do + * restore_flags on failure in + * isicom_send_break, verify put_user + * result + * + * 11/02/03 ranjeeth Added support for 230 Kbps and 460 Kbps + * Baud index extended to 21 + * + * 20/03/03 ranjeeth Made to work for Linux Advanced server. + * Taken care of license warning. + * + * 10/12/03 Ravindra Made to work for Fedora Core 1 of + * Red Hat Distribution + * + * 06/01/05 Alan Cox Merged the ISI and base kernel strands + * into a single 2.6 driver + * + * *********************************************************** + * + * To use this driver you also need the support package. You + * can find this in RPM format on + * ftp://ftp.linux.org.uk/pub/linux/alan + * + * You can find the original tools for this direct from Multitech + * ftp://ftp.multitech.com/ISI-Cards/ + * + * Having installed the cards the module options (/etc/modprobe.conf) + * + * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 + * + * Omit those entries for boards you don't have installed. + * + * TODO + * Merge testing + * 64-bit verification + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include + +#define InterruptTheCard(base) outw(0, (base) + 0xc) +#define ClearInterrupt(base) inw((base) + 0x0a) + +#ifdef DEBUG +#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c)) +#else +#define isicom_paranoia_check(a, b, c) 0 +#endif + +static int isicom_probe(struct pci_dev *, const struct pci_device_id *); +static void __devexit isicom_remove(struct pci_dev *); + +static struct pci_device_id isicom_pci_tbl[] = { + { PCI_DEVICE(VENDOR_ID, 0x2028) }, + { PCI_DEVICE(VENDOR_ID, 0x2051) }, + { PCI_DEVICE(VENDOR_ID, 0x2052) }, + { PCI_DEVICE(VENDOR_ID, 0x2053) }, + { PCI_DEVICE(VENDOR_ID, 0x2054) }, + { PCI_DEVICE(VENDOR_ID, 0x2055) }, + { PCI_DEVICE(VENDOR_ID, 0x2056) }, + { PCI_DEVICE(VENDOR_ID, 0x2057) }, + { PCI_DEVICE(VENDOR_ID, 0x2058) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, isicom_pci_tbl); + +static struct pci_driver isicom_driver = { + .name = "isicom", + .id_table = isicom_pci_tbl, + .probe = isicom_probe, + .remove = __devexit_p(isicom_remove) +}; + +static int prev_card = 3; /* start servicing isi_card[0] */ +static struct tty_driver *isicom_normal; + +static void isicom_tx(unsigned long _data); +static void isicom_start(struct tty_struct *tty); + +static DEFINE_TIMER(tx, isicom_tx, 0, 0); + +/* baud index mappings from linux defns to isi */ + +static signed char linuxb_to_isib[] = { + -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21 +}; + +struct isi_board { + unsigned long base; + int irq; + unsigned char port_count; + unsigned short status; + unsigned short port_status; /* each bit for each port */ + unsigned short shift_count; + struct isi_port *ports; + signed char count; + spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */ + unsigned long flags; + unsigned int index; +}; + +struct isi_port { + unsigned short magic; + struct tty_port port; + u16 channel; + u16 status; + struct isi_board *card; + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; +}; + +static struct isi_board isi_card[BOARD_COUNT]; +static struct isi_port isi_ports[PORT_COUNT]; + +/* + * Locking functions for card level locking. We need to own both + * the kernel lock for the card and have the card in a position that + * it wants to talk. + */ + +static inline int WaitTillCardIsFree(unsigned long base) +{ + unsigned int count = 0; + unsigned int a = in_atomic(); /* do we run under spinlock? */ + + while (!(inw(base + 0xe) & 0x1) && count++ < 100) + if (a) + mdelay(1); + else + msleep(1); + + return !(inw(base + 0xe) & 0x1); +} + +static int lock_card(struct isi_board *card) +{ + unsigned long base = card->base; + unsigned int retries, a; + + for (retries = 0; retries < 10; retries++) { + spin_lock_irqsave(&card->card_lock, card->flags); + for (a = 0; a < 10; a++) { + if (inw(base + 0xe) & 0x1) + return 1; + udelay(10); + } + spin_unlock_irqrestore(&card->card_lock, card->flags); + msleep(10); + } + pr_warning("Failed to lock Card (0x%lx)\n", card->base); + + return 0; /* Failed to acquire the card! */ +} + +static void unlock_card(struct isi_board *card) +{ + spin_unlock_irqrestore(&card->card_lock, card->flags); +} + +/* + * ISI Card specific ops ... + */ + +/* card->lock HAS to be held */ +static void raise_dtr(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0504, base); + InterruptTheCard(base); + port->status |= ISI_DTR; +} + +/* card->lock HAS to be held */ +static inline void drop_dtr(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0404, base); + InterruptTheCard(base); + port->status &= ~ISI_DTR; +} + +/* card->lock HAS to be held */ +static inline void raise_rts(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0a04, base); + InterruptTheCard(base); + port->status |= ISI_RTS; +} + +/* card->lock HAS to be held */ +static inline void drop_rts(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0804, base); + InterruptTheCard(base); + port->status &= ~ISI_RTS; +} + +/* card->lock MUST NOT be held */ + +static void isicom_dtr_rts(struct tty_port *port, int on) +{ + struct isi_port *ip = container_of(port, struct isi_port, port); + struct isi_board *card = ip->card; + unsigned long base = card->base; + u16 channel = ip->channel; + + if (!lock_card(card)) + return; + + if (on) { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0f04, base); + InterruptTheCard(base); + ip->status |= (ISI_DTR | ISI_RTS); + } else { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0C04, base); + InterruptTheCard(base); + ip->status &= ~(ISI_DTR | ISI_RTS); + } + unlock_card(card); +} + +/* card->lock HAS to be held */ +static void drop_dtr_rts(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0c04, base); + InterruptTheCard(base); + port->status &= ~(ISI_RTS | ISI_DTR); +} + +/* + * ISICOM Driver specific routines ... + * + */ + +static inline int __isicom_paranoia_check(struct isi_port const *port, + char *name, const char *routine) +{ + if (!port) { + pr_warning("Warning: bad isicom magic for dev %s in %s.\n", + name, routine); + return 1; + } + if (port->magic != ISICOM_MAGIC) { + pr_warning("Warning: NULL isicom port for dev %s in %s.\n", + name, routine); + return 1; + } + + return 0; +} + +/* + * Transmitter. + * + * We shovel data into the card buffers on a regular basis. The card + * will do the rest of the work for us. + */ + +static void isicom_tx(unsigned long _data) +{ + unsigned long flags, base; + unsigned int retries; + short count = (BOARD_COUNT-1), card; + short txcount, wrd, residue, word_count, cnt; + struct isi_port *port; + struct tty_struct *tty; + + /* find next active board */ + card = (prev_card + 1) & 0x0003; + while (count-- > 0) { + if (isi_card[card].status & BOARD_ACTIVE) + break; + card = (card + 1) & 0x0003; + } + if (!(isi_card[card].status & BOARD_ACTIVE)) + goto sched_again; + + prev_card = card; + + count = isi_card[card].port_count; + port = isi_card[card].ports; + base = isi_card[card].base; + + spin_lock_irqsave(&isi_card[card].card_lock, flags); + for (retries = 0; retries < 100; retries++) { + if (inw(base + 0xe) & 0x1) + break; + udelay(2); + } + if (retries >= 100) + goto unlock; + + tty = tty_port_tty_get(&port->port); + if (tty == NULL) + goto put_unlock; + + for (; count > 0; count--, port++) { + /* port not active or tx disabled to force flow control */ + if (!(port->port.flags & ASYNC_INITIALIZED) || + !(port->status & ISI_TXOK)) + continue; + + txcount = min_t(short, TX_SIZE, port->xmit_cnt); + if (txcount <= 0 || tty->stopped || tty->hw_stopped) + continue; + + if (!(inw(base + 0x02) & (1 << port->channel))) + continue; + + pr_debug("txing %d bytes, port%d.\n", + txcount, port->channel + 1); + outw((port->channel << isi_card[card].shift_count) | txcount, + base); + residue = NO; + wrd = 0; + while (1) { + cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE + - port->xmit_tail)); + if (residue == YES) { + residue = NO; + if (cnt > 0) { + wrd |= (port->port.xmit_buf[port->xmit_tail] + << 8); + port->xmit_tail = (port->xmit_tail + 1) + & (SERIAL_XMIT_SIZE - 1); + port->xmit_cnt--; + txcount--; + cnt--; + outw(wrd, base); + } else { + outw(wrd, base); + break; + } + } + if (cnt <= 0) + break; + word_count = cnt >> 1; + outsw(base, port->port.xmit_buf+port->xmit_tail, word_count); + port->xmit_tail = (port->xmit_tail + + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1); + txcount -= (word_count << 1); + port->xmit_cnt -= (word_count << 1); + if (cnt & 0x0001) { + residue = YES; + wrd = port->port.xmit_buf[port->xmit_tail]; + port->xmit_tail = (port->xmit_tail + 1) + & (SERIAL_XMIT_SIZE - 1); + port->xmit_cnt--; + txcount--; + } + } + + InterruptTheCard(base); + if (port->xmit_cnt <= 0) + port->status &= ~ISI_TXOK; + if (port->xmit_cnt <= WAKEUP_CHARS) + tty_wakeup(tty); + } + +put_unlock: + tty_kref_put(tty); +unlock: + spin_unlock_irqrestore(&isi_card[card].card_lock, flags); + /* schedule another tx for hopefully in about 10ms */ +sched_again: + mod_timer(&tx, jiffies + msecs_to_jiffies(10)); +} + +/* + * Main interrupt handler routine + */ + +static irqreturn_t isicom_interrupt(int irq, void *dev_id) +{ + struct isi_board *card = dev_id; + struct isi_port *port; + struct tty_struct *tty; + unsigned long base; + u16 header, word_count, count, channel; + short byte_count; + unsigned char *rp; + + if (!card || !(card->status & FIRMWARE_LOADED)) + return IRQ_NONE; + + base = card->base; + + /* did the card interrupt us? */ + if (!(inw(base + 0x0e) & 0x02)) + return IRQ_NONE; + + spin_lock(&card->card_lock); + + /* + * disable any interrupts from the PCI card and lower the + * interrupt line + */ + outw(0x8000, base+0x04); + ClearInterrupt(base); + + inw(base); /* get the dummy word out */ + header = inw(base); + channel = (header & 0x7800) >> card->shift_count; + byte_count = header & 0xff; + + if (channel + 1 > card->port_count) { + pr_warning("%s(0x%lx): %d(channel) > port_count.\n", + __func__, base, channel+1); + outw(0x0000, base+0x04); /* enable interrupts */ + spin_unlock(&card->card_lock); + return IRQ_HANDLED; + } + port = card->ports + channel; + if (!(port->port.flags & ASYNC_INITIALIZED)) { + outw(0x0000, base+0x04); /* enable interrupts */ + spin_unlock(&card->card_lock); + return IRQ_HANDLED; + } + + tty = tty_port_tty_get(&port->port); + if (tty == NULL) { + word_count = byte_count >> 1; + while (byte_count > 1) { + inw(base); + byte_count -= 2; + } + if (byte_count & 0x01) + inw(base); + outw(0x0000, base+0x04); /* enable interrupts */ + spin_unlock(&card->card_lock); + return IRQ_HANDLED; + } + + if (header & 0x8000) { /* Status Packet */ + header = inw(base); + switch (header & 0xff) { + case 0: /* Change in EIA signals */ + if (port->port.flags & ASYNC_CHECK_CD) { + if (port->status & ISI_DCD) { + if (!(header & ISI_DCD)) { + /* Carrier has been lost */ + pr_debug("%s: DCD->low.\n", + __func__); + port->status &= ~ISI_DCD; + tty_hangup(tty); + } + } else if (header & ISI_DCD) { + /* Carrier has been detected */ + pr_debug("%s: DCD->high.\n", + __func__); + port->status |= ISI_DCD; + wake_up_interruptible(&port->port.open_wait); + } + } else { + if (header & ISI_DCD) + port->status |= ISI_DCD; + else + port->status &= ~ISI_DCD; + } + + if (port->port.flags & ASYNC_CTS_FLOW) { + if (tty->hw_stopped) { + if (header & ISI_CTS) { + port->port.tty->hw_stopped = 0; + /* start tx ing */ + port->status |= (ISI_TXOK + | ISI_CTS); + tty_wakeup(tty); + } + } else if (!(header & ISI_CTS)) { + tty->hw_stopped = 1; + /* stop tx ing */ + port->status &= ~(ISI_TXOK | ISI_CTS); + } + } else { + if (header & ISI_CTS) + port->status |= ISI_CTS; + else + port->status &= ~ISI_CTS; + } + + if (header & ISI_DSR) + port->status |= ISI_DSR; + else + port->status &= ~ISI_DSR; + + if (header & ISI_RI) + port->status |= ISI_RI; + else + port->status &= ~ISI_RI; + + break; + + case 1: /* Received Break !!! */ + tty_insert_flip_char(tty, 0, TTY_BREAK); + if (port->port.flags & ASYNC_SAK) + do_SAK(tty); + tty_flip_buffer_push(tty); + break; + + case 2: /* Statistics */ + pr_debug("%s: stats!!!\n", __func__); + break; + + default: + pr_debug("%s: Unknown code in status packet.\n", + __func__); + break; + } + } else { /* Data Packet */ + + count = tty_prepare_flip_string(tty, &rp, byte_count & ~1); + pr_debug("%s: Can rx %d of %d bytes.\n", + __func__, count, byte_count); + word_count = count >> 1; + insw(base, rp, word_count); + byte_count -= (word_count << 1); + if (count & 0x0001) { + tty_insert_flip_char(tty, inw(base) & 0xff, + TTY_NORMAL); + byte_count -= 2; + } + if (byte_count > 0) { + pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n", + __func__, base, channel + 1); + /* drain out unread xtra data */ + while (byte_count > 0) { + inw(base); + byte_count -= 2; + } + } + tty_flip_buffer_push(tty); + } + outw(0x0000, base+0x04); /* enable interrupts */ + spin_unlock(&card->card_lock); + tty_kref_put(tty); + + return IRQ_HANDLED; +} + +static void isicom_config_port(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long baud; + unsigned long base = card->base; + u16 channel_setup, channel = port->channel, + shift_count = card->shift_count; + unsigned char flow_ctrl; + + /* FIXME: Switch to new tty baud API */ + baud = C_BAUD(tty); + if (baud & CBAUDEX) { + baud &= ~CBAUDEX; + + /* if CBAUDEX bit is on and the baud is set to either 50 or 75 + * then the card is programmed for 57.6Kbps or 115Kbps + * respectively. + */ + + /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */ + if (baud < 1 || baud > 4) + tty->termios->c_cflag &= ~CBAUDEX; + else + baud += 15; + } + if (baud == 15) { + + /* the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set + * by the set_serial_info ioctl ... this is done by + * the 'setserial' utility. + */ + + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + baud++; /* 57.6 Kbps */ + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + baud += 2; /* 115 Kbps */ + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + baud += 3; /* 230 kbps*/ + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + baud += 4; /* 460 kbps*/ + } + if (linuxb_to_isib[baud] == -1) { + /* hang up */ + drop_dtr(port); + return; + } else + raise_dtr(port); + + if (WaitTillCardIsFree(base) == 0) { + outw(0x8000 | (channel << shift_count) | 0x03, base); + outw(linuxb_to_isib[baud] << 8 | 0x03, base); + channel_setup = 0; + switch (C_CSIZE(tty)) { + case CS5: + channel_setup |= ISICOM_CS5; + break; + case CS6: + channel_setup |= ISICOM_CS6; + break; + case CS7: + channel_setup |= ISICOM_CS7; + break; + case CS8: + channel_setup |= ISICOM_CS8; + break; + } + + if (C_CSTOPB(tty)) + channel_setup |= ISICOM_2SB; + if (C_PARENB(tty)) { + channel_setup |= ISICOM_EVPAR; + if (C_PARODD(tty)) + channel_setup |= ISICOM_ODPAR; + } + outw(channel_setup, base); + InterruptTheCard(base); + } + if (C_CLOCAL(tty)) + port->port.flags &= ~ASYNC_CHECK_CD; + else + port->port.flags |= ASYNC_CHECK_CD; + + /* flow control settings ...*/ + flow_ctrl = 0; + port->port.flags &= ~ASYNC_CTS_FLOW; + if (C_CRTSCTS(tty)) { + port->port.flags |= ASYNC_CTS_FLOW; + flow_ctrl |= ISICOM_CTSRTS; + } + if (I_IXON(tty)) + flow_ctrl |= ISICOM_RESPOND_XONXOFF; + if (I_IXOFF(tty)) + flow_ctrl |= ISICOM_INITIATE_XONXOFF; + + if (WaitTillCardIsFree(base) == 0) { + outw(0x8000 | (channel << shift_count) | 0x04, base); + outw(flow_ctrl << 8 | 0x05, base); + outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base); + InterruptTheCard(base); + } + + /* rx enabled -> enable port for rx on the card */ + if (C_CREAD(tty)) { + card->port_status |= (1 << channel); + outw(card->port_status, base + 0x02); + } +} + +/* open et all */ + +static inline void isicom_setup_board(struct isi_board *bp) +{ + int channel; + struct isi_port *port; + + bp->count++; + if (!(bp->status & BOARD_INIT)) { + port = bp->ports; + for (channel = 0; channel < bp->port_count; channel++, port++) + drop_dtr_rts(port); + } + bp->status |= BOARD_ACTIVE | BOARD_INIT; +} + +/* Activate and thus setup board are protected from races against shutdown + by the tty_port mutex */ + +static int isicom_activate(struct tty_port *tport, struct tty_struct *tty) +{ + struct isi_port *port = container_of(tport, struct isi_port, port); + struct isi_board *card = port->card; + unsigned long flags; + + if (tty_port_alloc_xmit_buf(tport) < 0) + return -ENOMEM; + + spin_lock_irqsave(&card->card_lock, flags); + isicom_setup_board(card); + + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + + /* discard any residual data */ + if (WaitTillCardIsFree(card->base) == 0) { + outw(0x8000 | (port->channel << card->shift_count) | 0x02, + card->base); + outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base); + InterruptTheCard(card->base); + } + isicom_config_port(tty); + spin_unlock_irqrestore(&card->card_lock, flags); + + return 0; +} + +static int isicom_carrier_raised(struct tty_port *port) +{ + struct isi_port *ip = container_of(port, struct isi_port, port); + return (ip->status & ISI_DCD)?1 : 0; +} + +static struct tty_port *isicom_find_port(struct tty_struct *tty) +{ + struct isi_port *port; + struct isi_board *card; + unsigned int board; + int line = tty->index; + + if (line < 0 || line > PORT_COUNT-1) + return NULL; + board = BOARD(line); + card = &isi_card[board]; + + if (!(card->status & FIRMWARE_LOADED)) + return NULL; + + /* open on a port greater than the port count for the card !!! */ + if (line > ((board * 16) + card->port_count - 1)) + return NULL; + + port = &isi_ports[line]; + if (isicom_paranoia_check(port, tty->name, "isicom_open")) + return NULL; + + return &port->port; +} + +static int isicom_open(struct tty_struct *tty, struct file *filp) +{ + struct isi_port *port; + struct tty_port *tport; + + tport = isicom_find_port(tty); + if (tport == NULL) + return -ENODEV; + port = container_of(tport, struct isi_port, port); + + tty->driver_data = port; + return tty_port_open(tport, tty, filp); +} + +/* close et all */ + +/* card->lock HAS to be held */ +static void isicom_shutdown_port(struct isi_port *port) +{ + struct isi_board *card = port->card; + + if (--card->count < 0) { + pr_debug("%s: bad board(0x%lx) count %d.\n", + __func__, card->base, card->count); + card->count = 0; + } + /* last port was closed, shutdown that board too */ + if (!card->count) + card->status &= BOARD_ACTIVE; +} + +static void isicom_flush_buffer(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long flags; + + if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer")) + return; + + spin_lock_irqsave(&card->card_lock, flags); + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + spin_unlock_irqrestore(&card->card_lock, flags); + + tty_wakeup(tty); +} + +static void isicom_shutdown(struct tty_port *port) +{ + struct isi_port *ip = container_of(port, struct isi_port, port); + struct isi_board *card = ip->card; + unsigned long flags; + + /* indicate to the card that no more data can be received + on this port */ + spin_lock_irqsave(&card->card_lock, flags); + card->port_status &= ~(1 << ip->channel); + outw(card->port_status, card->base + 0x02); + isicom_shutdown_port(ip); + spin_unlock_irqrestore(&card->card_lock, flags); + tty_port_free_xmit_buf(port); +} + +static void isicom_close(struct tty_struct *tty, struct file *filp) +{ + struct isi_port *ip = tty->driver_data; + struct tty_port *port; + + if (ip == NULL) + return; + + port = &ip->port; + if (isicom_paranoia_check(ip, tty->name, "isicom_close")) + return; + tty_port_close(port, tty, filp); +} + +/* write et all */ +static int isicom_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long flags; + int cnt, total = 0; + + if (isicom_paranoia_check(port, tty->name, "isicom_write")) + return 0; + + spin_lock_irqsave(&card->card_lock, flags); + + while (1) { + cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt + - 1, SERIAL_XMIT_SIZE - port->xmit_head)); + if (cnt <= 0) + break; + + memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt); + port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE + - 1); + port->xmit_cnt += cnt; + buf += cnt; + count -= cnt; + total += cnt; + } + if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped) + port->status |= ISI_TXOK; + spin_unlock_irqrestore(&card->card_lock, flags); + return total; +} + +/* put_char et all */ +static int isicom_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long flags; + + if (isicom_paranoia_check(port, tty->name, "isicom_put_char")) + return 0; + + spin_lock_irqsave(&card->card_lock, flags); + if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { + spin_unlock_irqrestore(&card->card_lock, flags); + return 0; + } + + port->port.xmit_buf[port->xmit_head++] = ch; + port->xmit_head &= (SERIAL_XMIT_SIZE - 1); + port->xmit_cnt++; + spin_unlock_irqrestore(&card->card_lock, flags); + return 1; +} + +/* flush_chars et all */ +static void isicom_flush_chars(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars")) + return; + + if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !port->port.xmit_buf) + return; + + /* this tells the transmitter to consider this port for + data output to the card ... that's the best we can do. */ + port->status |= ISI_TXOK; +} + +/* write_room et all */ +static int isicom_write_room(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + int free; + + if (isicom_paranoia_check(port, tty->name, "isicom_write_room")) + return 0; + + free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; + if (free < 0) + free = 0; + return free; +} + +/* chars_in_buffer et all */ +static int isicom_chars_in_buffer(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer")) + return 0; + return port->xmit_cnt; +} + +/* ioctl et all */ +static int isicom_send_break(struct tty_struct *tty, int length) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long base = card->base; + + if (length == -1) + return -EOPNOTSUPP; + + if (!lock_card(card)) + return -EINVAL; + + outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base); + outw((length & 0xff) << 8 | 0x00, base); + outw((length & 0xff00), base); + InterruptTheCard(base); + + unlock_card(card); + return 0; +} + +static int isicom_tiocmget(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + /* just send the port status */ + u16 status = port->status; + + if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) + return -ENODEV; + + return ((status & ISI_RTS) ? TIOCM_RTS : 0) | + ((status & ISI_DTR) ? TIOCM_DTR : 0) | + ((status & ISI_DCD) ? TIOCM_CAR : 0) | + ((status & ISI_DSR) ? TIOCM_DSR : 0) | + ((status & ISI_CTS) ? TIOCM_CTS : 0) | + ((status & ISI_RI ) ? TIOCM_RI : 0); +} + +static int isicom_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct isi_port *port = tty->driver_data; + unsigned long flags; + + if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) + return -ENODEV; + + spin_lock_irqsave(&port->card->card_lock, flags); + if (set & TIOCM_RTS) + raise_rts(port); + if (set & TIOCM_DTR) + raise_dtr(port); + + if (clear & TIOCM_RTS) + drop_rts(port); + if (clear & TIOCM_DTR) + drop_dtr(port); + spin_unlock_irqrestore(&port->card->card_lock, flags); + + return 0; +} + +static int isicom_set_serial_info(struct tty_struct *tty, + struct serial_struct __user *info) +{ + struct isi_port *port = tty->driver_data; + struct serial_struct newinfo; + int reconfig_port; + + if (copy_from_user(&newinfo, info, sizeof(newinfo))) + return -EFAULT; + + mutex_lock(&port->port.mutex); + reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) != + (newinfo.flags & ASYNC_SPD_MASK)); + + if (!capable(CAP_SYS_ADMIN)) { + if ((newinfo.close_delay != port->port.close_delay) || + (newinfo.closing_wait != port->port.closing_wait) || + ((newinfo.flags & ~ASYNC_USR_MASK) != + (port->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&port->port.mutex); + return -EPERM; + } + port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | + (newinfo.flags & ASYNC_USR_MASK)); + } else { + port->port.close_delay = newinfo.close_delay; + port->port.closing_wait = newinfo.closing_wait; + port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | + (newinfo.flags & ASYNC_FLAGS)); + } + if (reconfig_port) { + unsigned long flags; + spin_lock_irqsave(&port->card->card_lock, flags); + isicom_config_port(tty); + spin_unlock_irqrestore(&port->card->card_lock, flags); + } + mutex_unlock(&port->port.mutex); + return 0; +} + +static int isicom_get_serial_info(struct isi_port *port, + struct serial_struct __user *info) +{ + struct serial_struct out_info; + + mutex_lock(&port->port.mutex); + memset(&out_info, 0, sizeof(out_info)); +/* out_info.type = ? */ + out_info.line = port - isi_ports; + out_info.port = port->card->base; + out_info.irq = port->card->irq; + out_info.flags = port->port.flags; +/* out_info.baud_base = ? */ + out_info.close_delay = port->port.close_delay; + out_info.closing_wait = port->port.closing_wait; + mutex_unlock(&port->port.mutex); + if (copy_to_user(info, &out_info, sizeof(out_info))) + return -EFAULT; + return 0; +} + +static int isicom_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct isi_port *port = tty->driver_data; + void __user *argp = (void __user *)arg; + + if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) + return -ENODEV; + + switch (cmd) { + case TIOCGSERIAL: + return isicom_get_serial_info(port, argp); + + case TIOCSSERIAL: + return isicom_set_serial_info(tty, argp); + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* set_termios et all */ +static void isicom_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct isi_port *port = tty->driver_data; + unsigned long flags; + + if (isicom_paranoia_check(port, tty->name, "isicom_set_termios")) + return; + + if (tty->termios->c_cflag == old_termios->c_cflag && + tty->termios->c_iflag == old_termios->c_iflag) + return; + + spin_lock_irqsave(&port->card->card_lock, flags); + isicom_config_port(tty); + spin_unlock_irqrestore(&port->card->card_lock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + isicom_start(tty); + } +} + +/* throttle et all */ +static void isicom_throttle(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + + if (isicom_paranoia_check(port, tty->name, "isicom_throttle")) + return; + + /* tell the card that this port cannot handle any more data for now */ + card->port_status &= ~(1 << port->channel); + outw(card->port_status, card->base + 0x02); +} + +/* unthrottle et all */ +static void isicom_unthrottle(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + + if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle")) + return; + + /* tell the card that this port is ready to accept more data */ + card->port_status |= (1 << port->channel); + outw(card->port_status, card->base + 0x02); +} + +/* stop et all */ +static void isicom_stop(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_stop")) + return; + + /* this tells the transmitter not to consider this port for + data output to the card. */ + port->status &= ~ISI_TXOK; +} + +/* start et all */ +static void isicom_start(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_start")) + return; + + /* this tells the transmitter to consider this port for + data output to the card. */ + port->status |= ISI_TXOK; +} + +static void isicom_hangup(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_hangup")) + return; + tty_port_hangup(&port->port); +} + + +/* + * Driver init and deinit functions + */ + +static const struct tty_operations isicom_ops = { + .open = isicom_open, + .close = isicom_close, + .write = isicom_write, + .put_char = isicom_put_char, + .flush_chars = isicom_flush_chars, + .write_room = isicom_write_room, + .chars_in_buffer = isicom_chars_in_buffer, + .ioctl = isicom_ioctl, + .set_termios = isicom_set_termios, + .throttle = isicom_throttle, + .unthrottle = isicom_unthrottle, + .stop = isicom_stop, + .start = isicom_start, + .hangup = isicom_hangup, + .flush_buffer = isicom_flush_buffer, + .tiocmget = isicom_tiocmget, + .tiocmset = isicom_tiocmset, + .break_ctl = isicom_send_break, +}; + +static const struct tty_port_operations isicom_port_ops = { + .carrier_raised = isicom_carrier_raised, + .dtr_rts = isicom_dtr_rts, + .activate = isicom_activate, + .shutdown = isicom_shutdown, +}; + +static int __devinit reset_card(struct pci_dev *pdev, + const unsigned int card, unsigned int *signature) +{ + struct isi_board *board = pci_get_drvdata(pdev); + unsigned long base = board->base; + unsigned int sig, portcount = 0; + int retval = 0; + + dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1, + base); + + inw(base + 0x8); + + msleep(10); + + outw(0, base + 0x8); /* Reset */ + + msleep(1000); + + sig = inw(base + 0x4) & 0xff; + + if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd && + sig != 0xee) { + dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible " + "bad I/O Port Address 0x%lx).\n", card + 1, base); + dev_dbg(&pdev->dev, "Sig=0x%x\n", sig); + retval = -EIO; + goto end; + } + + msleep(10); + + portcount = inw(base + 0x2); + if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 && + portcount != 8 && portcount != 16)) { + dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n", + card + 1); + retval = -EIO; + goto end; + } + + switch (sig) { + case 0xa5: + case 0xbb: + case 0xdd: + board->port_count = (portcount == 4) ? 4 : 8; + board->shift_count = 12; + break; + case 0xcc: + case 0xee: + board->port_count = 16; + board->shift_count = 11; + break; + } + dev_info(&pdev->dev, "-Done\n"); + *signature = sig; + +end: + return retval; +} + +static int __devinit load_firmware(struct pci_dev *pdev, + const unsigned int index, const unsigned int signature) +{ + struct isi_board *board = pci_get_drvdata(pdev); + const struct firmware *fw; + unsigned long base = board->base; + unsigned int a; + u16 word_count, status; + int retval = -EIO; + char *name; + u8 *data; + + struct stframe { + u16 addr; + u16 count; + u8 data[0]; + } *frame; + + switch (signature) { + case 0xa5: + name = "isi608.bin"; + break; + case 0xbb: + name = "isi608em.bin"; + break; + case 0xcc: + name = "isi616em.bin"; + break; + case 0xdd: + name = "isi4608.bin"; + break; + case 0xee: + name = "isi4616.bin"; + break; + default: + dev_err(&pdev->dev, "Unknown signature.\n"); + goto end; + } + + retval = request_firmware(&fw, name, &pdev->dev); + if (retval) + goto end; + + retval = -EIO; + + for (frame = (struct stframe *)fw->data; + frame < (struct stframe *)(fw->data + fw->size); + frame = (struct stframe *)((u8 *)(frame + 1) + + frame->count)) { + if (WaitTillCardIsFree(base)) + goto errrelfw; + + outw(0xf0, base); /* start upload sequence */ + outw(0x00, base); + outw(frame->addr, base); /* lsb of address */ + + word_count = frame->count / 2 + frame->count % 2; + outw(word_count, base); + InterruptTheCard(base); + + udelay(100); /* 0x2f */ + + if (WaitTillCardIsFree(base)) + goto errrelfw; + + status = inw(base + 0x4); + if (status != 0) { + dev_warn(&pdev->dev, "Card%d rejected load header:\n" + "Address:0x%x\n" + "Count:0x%x\n" + "Status:0x%x\n", + index + 1, frame->addr, frame->count, status); + goto errrelfw; + } + outsw(base, frame->data, word_count); + + InterruptTheCard(base); + + udelay(50); /* 0x0f */ + + if (WaitTillCardIsFree(base)) + goto errrelfw; + + status = inw(base + 0x4); + if (status != 0) { + dev_err(&pdev->dev, "Card%d got out of sync.Card " + "Status:0x%x\n", index + 1, status); + goto errrelfw; + } + } + +/* XXX: should we test it by reading it back and comparing with original like + * in load firmware package? */ + for (frame = (struct stframe *)fw->data; + frame < (struct stframe *)(fw->data + fw->size); + frame = (struct stframe *)((u8 *)(frame + 1) + + frame->count)) { + if (WaitTillCardIsFree(base)) + goto errrelfw; + + outw(0xf1, base); /* start download sequence */ + outw(0x00, base); + outw(frame->addr, base); /* lsb of address */ + + word_count = (frame->count >> 1) + frame->count % 2; + outw(word_count + 1, base); + InterruptTheCard(base); + + udelay(50); /* 0xf */ + + if (WaitTillCardIsFree(base)) + goto errrelfw; + + status = inw(base + 0x4); + if (status != 0) { + dev_warn(&pdev->dev, "Card%d rejected verify header:\n" + "Address:0x%x\n" + "Count:0x%x\n" + "Status: 0x%x\n", + index + 1, frame->addr, frame->count, status); + goto errrelfw; + } + + data = kmalloc(word_count * 2, GFP_KERNEL); + if (data == NULL) { + dev_err(&pdev->dev, "Card%d, firmware upload " + "failed, not enough memory\n", index + 1); + goto errrelfw; + } + inw(base); + insw(base, data, word_count); + InterruptTheCard(base); + + for (a = 0; a < frame->count; a++) + if (data[a] != frame->data[a]) { + kfree(data); + dev_err(&pdev->dev, "Card%d, firmware upload " + "failed\n", index + 1); + goto errrelfw; + } + kfree(data); + + udelay(50); /* 0xf */ + + if (WaitTillCardIsFree(base)) + goto errrelfw; + + status = inw(base + 0x4); + if (status != 0) { + dev_err(&pdev->dev, "Card%d verify got out of sync. " + "Card Status:0x%x\n", index + 1, status); + goto errrelfw; + } + } + + /* xfer ctrl */ + if (WaitTillCardIsFree(base)) + goto errrelfw; + + outw(0xf2, base); + outw(0x800, base); + outw(0x0, base); + outw(0x0, base); + InterruptTheCard(base); + outw(0x0, base + 0x4); /* for ISI4608 cards */ + + board->status |= FIRMWARE_LOADED; + retval = 0; + +errrelfw: + release_firmware(fw); +end: + return retval; +} + +/* + * Insmod can set static symbols so keep these static + */ +static unsigned int card_count; + +static int __devinit isicom_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned int uninitialized_var(signature), index; + int retval = -EPERM; + struct isi_board *board = NULL; + + if (card_count >= BOARD_COUNT) + goto err; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "failed to enable\n"); + goto err; + } + + dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device); + + /* allot the first empty slot in the array */ + for (index = 0; index < BOARD_COUNT; index++) { + if (isi_card[index].base == 0) { + board = &isi_card[index]; + break; + } + } + if (index == BOARD_COUNT) { + retval = -ENODEV; + goto err_disable; + } + + board->index = index; + board->base = pci_resource_start(pdev, 3); + board->irq = pdev->irq; + card_count++; + + pci_set_drvdata(pdev, board); + + retval = pci_request_region(pdev, 3, ISICOM_NAME); + if (retval) { + dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d " + "will be disabled.\n", board->base, board->base + 15, + index + 1); + retval = -EBUSY; + goto errdec; + } + + retval = request_irq(board->irq, isicom_interrupt, + IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board); + if (retval < 0) { + dev_err(&pdev->dev, "Could not install handler at Irq %d. " + "Card%d will be disabled.\n", board->irq, index + 1); + goto errunrr; + } + + retval = reset_card(pdev, index, &signature); + if (retval < 0) + goto errunri; + + retval = load_firmware(pdev, index, signature); + if (retval < 0) + goto errunri; + + for (index = 0; index < board->port_count; index++) + tty_register_device(isicom_normal, board->index * 16 + index, + &pdev->dev); + + return 0; + +errunri: + free_irq(board->irq, board); +errunrr: + pci_release_region(pdev, 3); +errdec: + board->base = 0; + card_count--; +err_disable: + pci_disable_device(pdev); +err: + return retval; +} + +static void __devexit isicom_remove(struct pci_dev *pdev) +{ + struct isi_board *board = pci_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < board->port_count; i++) + tty_unregister_device(isicom_normal, board->index * 16 + i); + + free_irq(board->irq, board); + pci_release_region(pdev, 3); + board->base = 0; + card_count--; + pci_disable_device(pdev); +} + +static int __init isicom_init(void) +{ + int retval, idx, channel; + struct isi_port *port; + + for (idx = 0; idx < BOARD_COUNT; idx++) { + port = &isi_ports[idx * 16]; + isi_card[idx].ports = port; + spin_lock_init(&isi_card[idx].card_lock); + for (channel = 0; channel < 16; channel++, port++) { + tty_port_init(&port->port); + port->port.ops = &isicom_port_ops; + port->magic = ISICOM_MAGIC; + port->card = &isi_card[idx]; + port->channel = channel; + port->port.close_delay = 50 * HZ/100; + port->port.closing_wait = 3000 * HZ/100; + port->status = 0; + /* . . . */ + } + isi_card[idx].base = 0; + isi_card[idx].irq = 0; + } + + /* tty driver structure initialization */ + isicom_normal = alloc_tty_driver(PORT_COUNT); + if (!isicom_normal) { + retval = -ENOMEM; + goto error; + } + + isicom_normal->owner = THIS_MODULE; + isicom_normal->name = "ttyM"; + isicom_normal->major = ISICOM_NMAJOR; + isicom_normal->minor_start = 0; + isicom_normal->type = TTY_DRIVER_TYPE_SERIAL; + isicom_normal->subtype = SERIAL_TYPE_NORMAL; + isicom_normal->init_termios = tty_std_termios; + isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | + CLOCAL; + isicom_normal->flags = TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK; + tty_set_operations(isicom_normal, &isicom_ops); + + retval = tty_register_driver(isicom_normal); + if (retval) { + pr_debug("Couldn't register the dialin driver\n"); + goto err_puttty; + } + + retval = pci_register_driver(&isicom_driver); + if (retval < 0) { + pr_err("Unable to register pci driver.\n"); + goto err_unrtty; + } + + mod_timer(&tx, jiffies + 1); + + return 0; +err_unrtty: + tty_unregister_driver(isicom_normal); +err_puttty: + put_tty_driver(isicom_normal); +error: + return retval; +} + +static void __exit isicom_exit(void) +{ + del_timer_sync(&tx); + + pci_unregister_driver(&isicom_driver); + tty_unregister_driver(isicom_normal); + put_tty_driver(isicom_normal); +} + +module_init(isicom_init); +module_exit(isicom_exit); + +MODULE_AUTHOR("MultiTech"); +MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("isi608.bin"); +MODULE_FIRMWARE("isi608em.bin"); +MODULE_FIRMWARE("isi616em.bin"); +MODULE_FIRMWARE("isi4608.bin"); +MODULE_FIRMWARE("isi4616.bin"); diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c new file mode 100644 index 000000000000..35b0c38590e6 --- /dev/null +++ b/drivers/tty/moxa.c @@ -0,0 +1,2092 @@ +/*****************************************************************************/ +/* + * moxa.c -- MOXA Intellio family multiport serial driver. + * + * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com). + * Copyright (c) 2007 Jiri Slaby + * + * This code is loosely based on the Linux serial driver, written by + * Linus Torvalds, Theodore T'so and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * MOXA Intellio Series Driver + * for : LINUX + * date : 1999/1/7 + * version : 5.1 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "moxa.h" + +#define MOXA_VERSION "6.0k" + +#define MOXA_FW_HDRLEN 32 + +#define MOXAMAJOR 172 + +#define MAX_BOARDS 4 /* Don't change this value */ +#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */ +#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD) + +#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \ + (brd)->boardType == MOXA_BOARD_C320_PCI) + +/* + * Define the Moxa PCI vendor and device IDs. + */ +#define MOXA_BUS_TYPE_ISA 0 +#define MOXA_BUS_TYPE_PCI 1 + +enum { + MOXA_BOARD_C218_PCI = 1, + MOXA_BOARD_C218_ISA, + MOXA_BOARD_C320_PCI, + MOXA_BOARD_C320_ISA, + MOXA_BOARD_CP204J, +}; + +static char *moxa_brdname[] = +{ + "C218 Turbo PCI series", + "C218 Turbo ISA series", + "C320 Turbo PCI series", + "C320 Turbo ISA series", + "CP-204J series", +}; + +#ifdef CONFIG_PCI +static struct pci_device_id moxa_pcibrds[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218), + .driver_data = MOXA_BOARD_C218_PCI }, + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320), + .driver_data = MOXA_BOARD_C320_PCI }, + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J), + .driver_data = MOXA_BOARD_CP204J }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, moxa_pcibrds); +#endif /* CONFIG_PCI */ + +struct moxa_port; + +static struct moxa_board_conf { + int boardType; + int numPorts; + int busType; + + unsigned int ready; + + struct moxa_port *ports; + + void __iomem *basemem; + void __iomem *intNdx; + void __iomem *intPend; + void __iomem *intTable; +} moxa_boards[MAX_BOARDS]; + +struct mxser_mstatus { + tcflag_t cflag; + int cts; + int dsr; + int ri; + int dcd; +}; + +struct moxaq_str { + int inq; + int outq; +}; + +struct moxa_port { + struct tty_port port; + struct moxa_board_conf *board; + void __iomem *tableAddr; + + int type; + int cflag; + unsigned long statusflags; + + u8 DCDState; /* Protected by the port lock */ + u8 lineCtrl; + u8 lowChkFlag; +}; + +struct mon_str { + int tick; + int rxcnt[MAX_PORTS]; + int txcnt[MAX_PORTS]; +}; + +/* statusflags */ +#define TXSTOPPED 1 +#define LOWWAIT 2 +#define EMPTYWAIT 3 + +#define SERIAL_DO_RESTART + +#define WAKEUP_CHARS 256 + +static int ttymajor = MOXAMAJOR; +static struct mon_str moxaLog; +static unsigned int moxaFuncTout = HZ / 2; +static unsigned int moxaLowWaterChk; +static DEFINE_MUTEX(moxa_openlock); +static DEFINE_SPINLOCK(moxa_lock); + +static unsigned long baseaddr[MAX_BOARDS]; +static unsigned int type[MAX_BOARDS]; +static unsigned int numports[MAX_BOARDS]; + +MODULE_AUTHOR("William Chen"); +MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("c218tunx.cod"); +MODULE_FIRMWARE("cp204unx.cod"); +MODULE_FIRMWARE("c320tunx.cod"); + +module_param_array(type, uint, NULL, 0); +MODULE_PARM_DESC(type, "card type: C218=2, C320=4"); +module_param_array(baseaddr, ulong, NULL, 0); +MODULE_PARM_DESC(baseaddr, "base address"); +module_param_array(numports, uint, NULL, 0); +MODULE_PARM_DESC(numports, "numports (ignored for C218)"); + +module_param(ttymajor, int, 0); + +/* + * static functions: + */ +static int moxa_open(struct tty_struct *, struct file *); +static void moxa_close(struct tty_struct *, struct file *); +static int moxa_write(struct tty_struct *, const unsigned char *, int); +static int moxa_write_room(struct tty_struct *); +static void moxa_flush_buffer(struct tty_struct *); +static int moxa_chars_in_buffer(struct tty_struct *); +static void moxa_set_termios(struct tty_struct *, struct ktermios *); +static void moxa_stop(struct tty_struct *); +static void moxa_start(struct tty_struct *); +static void moxa_hangup(struct tty_struct *); +static int moxa_tiocmget(struct tty_struct *tty); +static int moxa_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void moxa_poll(unsigned long); +static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); +static void moxa_shutdown(struct tty_port *); +static int moxa_carrier_raised(struct tty_port *); +static void moxa_dtr_rts(struct tty_port *, int); +/* + * moxa board interface functions: + */ +static void MoxaPortEnable(struct moxa_port *); +static void MoxaPortDisable(struct moxa_port *); +static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t); +static int MoxaPortGetLineOut(struct moxa_port *, int *, int *); +static void MoxaPortLineCtrl(struct moxa_port *, int, int); +static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int); +static int MoxaPortLineStatus(struct moxa_port *); +static void MoxaPortFlushData(struct moxa_port *, int); +static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int); +static int MoxaPortReadData(struct moxa_port *); +static int MoxaPortTxQueue(struct moxa_port *); +static int MoxaPortRxQueue(struct moxa_port *); +static int MoxaPortTxFree(struct moxa_port *); +static void MoxaPortTxDisable(struct moxa_port *); +static void MoxaPortTxEnable(struct moxa_port *); +static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *); +static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *); +static void MoxaSetFifo(struct moxa_port *port, int enable); + +/* + * I/O functions + */ + +static DEFINE_SPINLOCK(moxafunc_lock); + +static void moxa_wait_finish(void __iomem *ofsAddr) +{ + unsigned long end = jiffies + moxaFuncTout; + + while (readw(ofsAddr + FuncCode) != 0) + if (time_after(jiffies, end)) + return; + if (readw(ofsAddr + FuncCode) != 0 && printk_ratelimit()) + printk(KERN_WARNING "moxa function expired\n"); +} + +static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg) +{ + unsigned long flags; + spin_lock_irqsave(&moxafunc_lock, flags); + writew(arg, ofsAddr + FuncArg); + writew(cmd, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + spin_unlock_irqrestore(&moxafunc_lock, flags); +} + +static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg) +{ + unsigned long flags; + u16 ret; + spin_lock_irqsave(&moxafunc_lock, flags); + writew(arg, ofsAddr + FuncArg); + writew(cmd, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + ret = readw(ofsAddr + FuncArg); + spin_unlock_irqrestore(&moxafunc_lock, flags); + return ret; +} + +static void moxa_low_water_check(void __iomem *ofsAddr) +{ + u16 rptr, wptr, mask, len; + + if (readb(ofsAddr + FlagStat) & Xoff_state) { + rptr = readw(ofsAddr + RXrptr); + wptr = readw(ofsAddr + RXwptr); + mask = readw(ofsAddr + RX_mask); + len = (wptr - rptr) & mask; + if (len <= Low_water) + moxafunc(ofsAddr, FC_SendXon, 0); + } +} + +/* + * TTY operations + */ + +static int moxa_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct moxa_port *ch = tty->driver_data; + void __user *argp = (void __user *)arg; + int status, ret = 0; + + if (tty->index == MAX_PORTS) { + if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE && + cmd != MOXA_GETMSTATUS) + return -EINVAL; + } else if (!ch) + return -ENODEV; + + switch (cmd) { + case MOXA_GETDATACOUNT: + moxaLog.tick = jiffies; + if (copy_to_user(argp, &moxaLog, sizeof(moxaLog))) + ret = -EFAULT; + break; + case MOXA_FLUSH_QUEUE: + MoxaPortFlushData(ch, arg); + break; + case MOXA_GET_IOQUEUE: { + struct moxaq_str __user *argm = argp; + struct moxaq_str tmp; + struct moxa_port *p; + unsigned int i, j; + + for (i = 0; i < MAX_BOARDS; i++) { + p = moxa_boards[i].ports; + for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { + memset(&tmp, 0, sizeof(tmp)); + spin_lock_bh(&moxa_lock); + if (moxa_boards[i].ready) { + tmp.inq = MoxaPortRxQueue(p); + tmp.outq = MoxaPortTxQueue(p); + } + spin_unlock_bh(&moxa_lock); + if (copy_to_user(argm, &tmp, sizeof(tmp))) + return -EFAULT; + } + } + break; + } case MOXA_GET_OQUEUE: + status = MoxaPortTxQueue(ch); + ret = put_user(status, (unsigned long __user *)argp); + break; + case MOXA_GET_IQUEUE: + status = MoxaPortRxQueue(ch); + ret = put_user(status, (unsigned long __user *)argp); + break; + case MOXA_GETMSTATUS: { + struct mxser_mstatus __user *argm = argp; + struct mxser_mstatus tmp; + struct moxa_port *p; + unsigned int i, j; + + for (i = 0; i < MAX_BOARDS; i++) { + p = moxa_boards[i].ports; + for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { + struct tty_struct *ttyp; + memset(&tmp, 0, sizeof(tmp)); + spin_lock_bh(&moxa_lock); + if (!moxa_boards[i].ready) { + spin_unlock_bh(&moxa_lock); + goto copy; + } + + status = MoxaPortLineStatus(p); + spin_unlock_bh(&moxa_lock); + + if (status & 1) + tmp.cts = 1; + if (status & 2) + tmp.dsr = 1; + if (status & 4) + tmp.dcd = 1; + + ttyp = tty_port_tty_get(&p->port); + if (!ttyp || !ttyp->termios) + tmp.cflag = p->cflag; + else + tmp.cflag = ttyp->termios->c_cflag; + tty_kref_put(tty); +copy: + if (copy_to_user(argm, &tmp, sizeof(tmp))) + return -EFAULT; + } + } + break; + } + case TIOCGSERIAL: + mutex_lock(&ch->port.mutex); + ret = moxa_get_serial_info(ch, argp); + mutex_unlock(&ch->port.mutex); + break; + case TIOCSSERIAL: + mutex_lock(&ch->port.mutex); + ret = moxa_set_serial_info(ch, argp); + mutex_unlock(&ch->port.mutex); + break; + default: + ret = -ENOIOCTLCMD; + } + return ret; +} + +static int moxa_break_ctl(struct tty_struct *tty, int state) +{ + struct moxa_port *port = tty->driver_data; + + moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak, + Magic_code); + return 0; +} + +static const struct tty_operations moxa_ops = { + .open = moxa_open, + .close = moxa_close, + .write = moxa_write, + .write_room = moxa_write_room, + .flush_buffer = moxa_flush_buffer, + .chars_in_buffer = moxa_chars_in_buffer, + .ioctl = moxa_ioctl, + .set_termios = moxa_set_termios, + .stop = moxa_stop, + .start = moxa_start, + .hangup = moxa_hangup, + .break_ctl = moxa_break_ctl, + .tiocmget = moxa_tiocmget, + .tiocmset = moxa_tiocmset, +}; + +static const struct tty_port_operations moxa_port_ops = { + .carrier_raised = moxa_carrier_raised, + .dtr_rts = moxa_dtr_rts, + .shutdown = moxa_shutdown, +}; + +static struct tty_driver *moxaDriver; +static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); + +/* + * HW init + */ + +static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model) +{ + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + if (model != 1) + goto err; + break; + case MOXA_BOARD_CP204J: + if (model != 3) + goto err; + break; + default: + if (model != 2) + goto err; + break; + } + return 0; +err: + return -EINVAL; +} + +static int moxa_check_fw(const void *ptr) +{ + const __le16 *lptr = ptr; + + if (*lptr != cpu_to_le16(0x7980)) + return -EINVAL; + + return 0; +} + +static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + u16 tmp; + + writeb(HW_reset, baseAddr + Control_reg); /* reset */ + msleep(10); + memset_io(baseAddr, 0, 4096); + memcpy_toio(baseAddr, buf, len); /* download BIOS */ + writeb(0, baseAddr + Control_reg); /* restart */ + + msleep(2000); + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + tmp = readw(baseAddr + C218_key); + if (tmp != C218_KeyCode) + goto err; + break; + case MOXA_BOARD_CP204J: + tmp = readw(baseAddr + C218_key); + if (tmp != CP204J_KeyCode) + goto err; + break; + default: + tmp = readw(baseAddr + C320_key); + if (tmp != C320_KeyCode) + goto err; + tmp = readw(baseAddr + C320_status); + if (tmp != STS_init) { + printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic " + "module not found\n"); + return -EIO; + } + break; + } + + return 0; +err: + printk(KERN_ERR "MOXA: bios upload failed -- board not found\n"); + return -EIO; +} + +static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + + if (len < 7168) { + printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n"); + return -EINVAL; + } + + writew(len - 7168 - 2, baseAddr + C320bapi_len); + writeb(1, baseAddr + Control_reg); /* Select Page 1 */ + memcpy_toio(baseAddr + DynPage_addr, ptr, 7168); + writeb(2, baseAddr + Control_reg); /* Select Page 2 */ + memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168); + + return 0; +} + +static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + const __le16 *uptr = ptr; + size_t wlen, len2, j; + unsigned long key, loadbuf, loadlen, checksum, checksum_ok; + unsigned int i, retry; + u16 usum, keycode; + + keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode : + C218_KeyCode; + + switch (brd->boardType) { + case MOXA_BOARD_CP204J: + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + key = C218_key; + loadbuf = C218_LoadBuf; + loadlen = C218DLoad_len; + checksum = C218check_sum; + checksum_ok = C218chksum_ok; + break; + default: + key = C320_key; + keycode = C320_KeyCode; + loadbuf = C320_LoadBuf; + loadlen = C320DLoad_len; + checksum = C320check_sum; + checksum_ok = C320chksum_ok; + break; + } + + usum = 0; + wlen = len >> 1; + for (i = 0; i < wlen; i++) + usum += le16_to_cpu(uptr[i]); + retry = 0; + do { + wlen = len >> 1; + j = 0; + while (wlen) { + len2 = (wlen > 2048) ? 2048 : wlen; + wlen -= len2; + memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1); + j += len2 << 1; + + writew(len2, baseAddr + loadlen); + writew(0, baseAddr + key); + for (i = 0; i < 100; i++) { + if (readw(baseAddr + key) == keycode) + break; + msleep(10); + } + if (readw(baseAddr + key) != keycode) + return -EIO; + } + writew(0, baseAddr + loadlen); + writew(usum, baseAddr + checksum); + writew(0, baseAddr + key); + for (i = 0; i < 100; i++) { + if (readw(baseAddr + key) == keycode) + break; + msleep(10); + } + retry++; + } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3)); + if (readb(baseAddr + checksum_ok) != 1) + return -EIO; + + writew(0, baseAddr + key); + for (i = 0; i < 600; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + + if (MOXA_IS_320(brd)) { + if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */ + writew(0x3800, baseAddr + TMS320_PORT1); + writew(0x3900, baseAddr + TMS320_PORT2); + writew(28499, baseAddr + TMS320_CLOCK); + } else { + writew(0x3200, baseAddr + TMS320_PORT1); + writew(0x3400, baseAddr + TMS320_PORT2); + writew(19999, baseAddr + TMS320_CLOCK); + } + } + writew(1, baseAddr + Disable_IRQ); + writew(0, baseAddr + Magic_no); + for (i = 0; i < 500; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + + if (MOXA_IS_320(brd)) { + j = readw(baseAddr + Module_cnt); + if (j <= 0) + return -EIO; + brd->numPorts = j * 8; + writew(j, baseAddr + Module_no); + writew(0, baseAddr + Magic_no); + for (i = 0; i < 600; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + } + brd->intNdx = baseAddr + IRQindex; + brd->intPend = baseAddr + IRQpending; + brd->intTable = baseAddr + IRQtable; + + return 0; +} + +static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr, + size_t len) +{ + void __iomem *ofsAddr, *baseAddr = brd->basemem; + struct moxa_port *port; + int retval, i; + + if (len % 2) { + printk(KERN_ERR "MOXA: bios length is not even\n"); + return -EINVAL; + } + + retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */ + if (retval) + return retval; + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + case MOXA_BOARD_CP204J: + port = brd->ports; + for (i = 0; i < brd->numPorts; i++, port++) { + port->board = brd; + port->DCDState = 0; + port->tableAddr = baseAddr + Extern_table + + Extern_size * i; + ofsAddr = port->tableAddr; + writew(C218rx_mask, ofsAddr + RX_mask); + writew(C218tx_mask, ofsAddr + TX_mask); + writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb); + + writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb); + + } + break; + default: + port = brd->ports; + for (i = 0; i < brd->numPorts; i++, port++) { + port->board = brd; + port->DCDState = 0; + port->tableAddr = baseAddr + Extern_table + + Extern_size * i; + ofsAddr = port->tableAddr; + switch (brd->numPorts) { + case 8: + writew(C320p8rx_mask, ofsAddr + RX_mask); + writew(C320p8tx_mask, ofsAddr + TX_mask); + writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb); + + break; + case 16: + writew(C320p16rx_mask, ofsAddr + RX_mask); + writew(C320p16tx_mask, ofsAddr + TX_mask); + writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb); + break; + + case 24: + writew(C320p24rx_mask, ofsAddr + RX_mask); + writew(C320p24tx_mask, ofsAddr + TX_mask); + writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); + break; + case 32: + writew(C320p32rx_mask, ofsAddr + RX_mask); + writew(C320p32tx_mask, ofsAddr + TX_mask); + writew(C320p32tx_ofs, ofsAddr + Ofs_txb); + writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb); + writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb); + writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); + break; + } + } + break; + } + return 0; +} + +static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw) +{ + const void *ptr = fw->data; + char rsn[64]; + u16 lens[5]; + size_t len; + unsigned int a, lenp, lencnt; + int ret = -EINVAL; + struct { + __le32 magic; /* 0x34303430 */ + u8 reserved1[2]; + u8 type; /* UNIX = 3 */ + u8 model; /* C218T=1, C320T=2, CP204=3 */ + u8 reserved2[8]; + __le16 len[5]; + } const *hdr = ptr; + + BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens)); + + if (fw->size < MOXA_FW_HDRLEN) { + strcpy(rsn, "too short (even header won't fit)"); + goto err; + } + if (hdr->magic != cpu_to_le32(0x30343034)) { + sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic)); + goto err; + } + if (hdr->type != 3) { + sprintf(rsn, "not for linux, type is %u", hdr->type); + goto err; + } + if (moxa_check_fw_model(brd, hdr->model)) { + sprintf(rsn, "not for this card, model is %u", hdr->model); + goto err; + } + + len = MOXA_FW_HDRLEN; + lencnt = hdr->model == 2 ? 5 : 3; + for (a = 0; a < ARRAY_SIZE(lens); a++) { + lens[a] = le16_to_cpu(hdr->len[a]); + if (lens[a] && len + lens[a] <= fw->size && + moxa_check_fw(&fw->data[len])) + printk(KERN_WARNING "MOXA firmware: unexpected input " + "at offset %u, but going on\n", (u32)len); + if (!lens[a] && a < lencnt) { + sprintf(rsn, "too few entries in fw file"); + goto err; + } + len += lens[a]; + } + + if (len != fw->size) { + sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size, + (u32)len); + goto err; + } + + ptr += MOXA_FW_HDRLEN; + lenp = 0; /* bios */ + + strcpy(rsn, "read above"); + + ret = moxa_load_bios(brd, ptr, lens[lenp]); + if (ret) + goto err; + + /* we skip the tty section (lens[1]), since we don't need it */ + ptr += lens[lenp] + lens[lenp + 1]; + lenp += 2; /* comm */ + + if (hdr->model == 2) { + ret = moxa_load_320b(brd, ptr, lens[lenp]); + if (ret) + goto err; + /* skip another tty */ + ptr += lens[lenp] + lens[lenp + 1]; + lenp += 2; + } + + ret = moxa_load_code(brd, ptr, lens[lenp]); + if (ret) + goto err; + + return 0; +err: + printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn); + return ret; +} + +static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) +{ + const struct firmware *fw; + const char *file; + struct moxa_port *p; + unsigned int i; + int ret; + + brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports), + GFP_KERNEL); + if (brd->ports == NULL) { + printk(KERN_ERR "cannot allocate memory for ports\n"); + ret = -ENOMEM; + goto err; + } + + for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) { + tty_port_init(&p->port); + p->port.ops = &moxa_port_ops; + p->type = PORT_16550A; + p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; + } + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + file = "c218tunx.cod"; + break; + case MOXA_BOARD_CP204J: + file = "cp204unx.cod"; + break; + default: + file = "c320tunx.cod"; + break; + } + + ret = request_firmware(&fw, file, dev); + if (ret) { + printk(KERN_ERR "MOXA: request_firmware failed. Make sure " + "you've placed '%s' file into your firmware " + "loader directory (e.g. /lib/firmware)\n", + file); + goto err_free; + } + + ret = moxa_load_fw(brd, fw); + + release_firmware(fw); + + if (ret) + goto err_free; + + spin_lock_bh(&moxa_lock); + brd->ready = 1; + if (!timer_pending(&moxaTimer)) + mod_timer(&moxaTimer, jiffies + HZ / 50); + spin_unlock_bh(&moxa_lock); + + return 0; +err_free: + kfree(brd->ports); +err: + return ret; +} + +static void moxa_board_deinit(struct moxa_board_conf *brd) +{ + unsigned int a, opened; + + mutex_lock(&moxa_openlock); + spin_lock_bh(&moxa_lock); + brd->ready = 0; + spin_unlock_bh(&moxa_lock); + + /* pci hot-un-plug support */ + for (a = 0; a < brd->numPorts; a++) + if (brd->ports[a].port.flags & ASYNC_INITIALIZED) { + struct tty_struct *tty = tty_port_tty_get( + &brd->ports[a].port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } + } + while (1) { + opened = 0; + for (a = 0; a < brd->numPorts; a++) + if (brd->ports[a].port.flags & ASYNC_INITIALIZED) + opened++; + mutex_unlock(&moxa_openlock); + if (!opened) + break; + msleep(50); + mutex_lock(&moxa_openlock); + } + + iounmap(brd->basemem); + brd->basemem = NULL; + kfree(brd->ports); +} + +#ifdef CONFIG_PCI +static int __devinit moxa_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct moxa_board_conf *board; + unsigned int i; + int board_type = ent->driver_data; + int retval; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "can't enable pci device\n"); + goto err; + } + + for (i = 0; i < MAX_BOARDS; i++) + if (moxa_boards[i].basemem == NULL) + break; + + retval = -ENODEV; + if (i >= MAX_BOARDS) { + dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards " + "found. Board is ignored.\n", MAX_BOARDS); + goto err; + } + + board = &moxa_boards[i]; + + retval = pci_request_region(pdev, 2, "moxa-base"); + if (retval) { + dev_err(&pdev->dev, "can't request pci region 2\n"); + goto err; + } + + board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000); + if (board->basemem == NULL) { + dev_err(&pdev->dev, "can't remap io space 2\n"); + goto err_reg; + } + + board->boardType = board_type; + switch (board_type) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + board->numPorts = 8; + break; + + case MOXA_BOARD_CP204J: + board->numPorts = 4; + break; + default: + board->numPorts = 0; + break; + } + board->busType = MOXA_BUS_TYPE_PCI; + + retval = moxa_init_board(board, &pdev->dev); + if (retval) + goto err_base; + + pci_set_drvdata(pdev, board); + + dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n", + moxa_brdname[board_type - 1], board->numPorts); + + return 0; +err_base: + iounmap(board->basemem); + board->basemem = NULL; +err_reg: + pci_release_region(pdev, 2); +err: + return retval; +} + +static void __devexit moxa_pci_remove(struct pci_dev *pdev) +{ + struct moxa_board_conf *brd = pci_get_drvdata(pdev); + + moxa_board_deinit(brd); + + pci_release_region(pdev, 2); +} + +static struct pci_driver moxa_pci_driver = { + .name = "moxa", + .id_table = moxa_pcibrds, + .probe = moxa_pci_probe, + .remove = __devexit_p(moxa_pci_remove) +}; +#endif /* CONFIG_PCI */ + +static int __init moxa_init(void) +{ + unsigned int isabrds = 0; + int retval = 0; + struct moxa_board_conf *brd = moxa_boards; + unsigned int i; + + printk(KERN_INFO "MOXA Intellio family driver version %s\n", + MOXA_VERSION); + moxaDriver = alloc_tty_driver(MAX_PORTS + 1); + if (!moxaDriver) + return -ENOMEM; + + moxaDriver->owner = THIS_MODULE; + moxaDriver->name = "ttyMX"; + moxaDriver->major = ttymajor; + moxaDriver->minor_start = 0; + moxaDriver->type = TTY_DRIVER_TYPE_SERIAL; + moxaDriver->subtype = SERIAL_TYPE_NORMAL; + moxaDriver->init_termios = tty_std_termios; + moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; + moxaDriver->init_termios.c_ispeed = 9600; + moxaDriver->init_termios.c_ospeed = 9600; + moxaDriver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(moxaDriver, &moxa_ops); + + if (tty_register_driver(moxaDriver)) { + printk(KERN_ERR "can't register MOXA Smartio tty driver!\n"); + put_tty_driver(moxaDriver); + return -1; + } + + /* Find the boards defined from module args. */ + + for (i = 0; i < MAX_BOARDS; i++) { + if (!baseaddr[i]) + break; + if (type[i] == MOXA_BOARD_C218_ISA || + type[i] == MOXA_BOARD_C320_ISA) { + pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n", + isabrds + 1, moxa_brdname[type[i] - 1], + baseaddr[i]); + brd->boardType = type[i]; + brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 : + numports[i]; + brd->busType = MOXA_BUS_TYPE_ISA; + brd->basemem = ioremap_nocache(baseaddr[i], 0x4000); + if (!brd->basemem) { + printk(KERN_ERR "MOXA: can't remap %lx\n", + baseaddr[i]); + continue; + } + if (moxa_init_board(brd, NULL)) { + iounmap(brd->basemem); + brd->basemem = NULL; + continue; + } + + printk(KERN_INFO "MOXA isa board found at 0x%.8lu and " + "ready (%u ports, firmware loaded)\n", + baseaddr[i], brd->numPorts); + + brd++; + isabrds++; + } + } + +#ifdef CONFIG_PCI + retval = pci_register_driver(&moxa_pci_driver); + if (retval) { + printk(KERN_ERR "Can't register MOXA pci driver!\n"); + if (isabrds) + retval = 0; + } +#endif + + return retval; +} + +static void __exit moxa_exit(void) +{ + unsigned int i; + +#ifdef CONFIG_PCI + pci_unregister_driver(&moxa_pci_driver); +#endif + + for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */ + if (moxa_boards[i].ready) + moxa_board_deinit(&moxa_boards[i]); + + del_timer_sync(&moxaTimer); + + if (tty_unregister_driver(moxaDriver)) + printk(KERN_ERR "Couldn't unregister MOXA Intellio family " + "serial driver\n"); + put_tty_driver(moxaDriver); +} + +module_init(moxa_init); +module_exit(moxa_exit); + +static void moxa_shutdown(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortDisable(ch); + MoxaPortFlushData(ch, 2); + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); +} + +static int moxa_carrier_raised(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + int dcd; + + spin_lock_irq(&port->lock); + dcd = ch->DCDState; + spin_unlock_irq(&port->lock); + return dcd; +} + +static void moxa_dtr_rts(struct tty_port *port, int onoff) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortLineCtrl(ch, onoff, onoff); +} + + +static int moxa_open(struct tty_struct *tty, struct file *filp) +{ + struct moxa_board_conf *brd; + struct moxa_port *ch; + int port; + int retval; + + port = tty->index; + if (port == MAX_PORTS) { + return capable(CAP_SYS_ADMIN) ? 0 : -EPERM; + } + if (mutex_lock_interruptible(&moxa_openlock)) + return -ERESTARTSYS; + brd = &moxa_boards[port / MAX_PORTS_PER_BOARD]; + if (!brd->ready) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + + if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + + ch = &brd->ports[port % MAX_PORTS_PER_BOARD]; + ch->port.count++; + tty->driver_data = ch; + tty_port_tty_set(&ch->port, tty); + mutex_lock(&ch->port.mutex); + if (!(ch->port.flags & ASYNC_INITIALIZED)) { + ch->statusflags = 0; + moxa_set_tty_param(tty, tty->termios); + MoxaPortLineCtrl(ch, 1, 1); + MoxaPortEnable(ch); + MoxaSetFifo(ch, ch->type == PORT_16550A); + ch->port.flags |= ASYNC_INITIALIZED; + } + mutex_unlock(&ch->port.mutex); + mutex_unlock(&moxa_openlock); + + retval = tty_port_block_til_ready(&ch->port, tty, filp); + if (retval == 0) + set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags); + return retval; +} + +static void moxa_close(struct tty_struct *tty, struct file *filp) +{ + struct moxa_port *ch = tty->driver_data; + ch->cflag = tty->termios->c_cflag; + tty_port_close(&ch->port, tty, filp); +} + +static int moxa_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct moxa_port *ch = tty->driver_data; + int len; + + if (ch == NULL) + return 0; + + spin_lock_bh(&moxa_lock); + len = MoxaPortWriteData(tty, buf, count); + spin_unlock_bh(&moxa_lock); + + set_bit(LOWWAIT, &ch->statusflags); + return len; +} + +static int moxa_write_room(struct tty_struct *tty) +{ + struct moxa_port *ch; + + if (tty->stopped) + return 0; + ch = tty->driver_data; + if (ch == NULL) + return 0; + return MoxaPortTxFree(ch); +} + +static void moxa_flush_buffer(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + MoxaPortFlushData(ch, 1); + tty_wakeup(tty); +} + +static int moxa_chars_in_buffer(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + int chars; + + chars = MoxaPortTxQueue(ch); + if (chars) + /* + * Make it possible to wakeup anything waiting for output + * in tty_ioctl.c, etc. + */ + set_bit(EMPTYWAIT, &ch->statusflags); + return chars; +} + +static int moxa_tiocmget(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + int flag = 0, dtr, rts; + + MoxaPortGetLineOut(ch, &dtr, &rts); + if (dtr) + flag |= TIOCM_DTR; + if (rts) + flag |= TIOCM_RTS; + dtr = MoxaPortLineStatus(ch); + if (dtr & 1) + flag |= TIOCM_CTS; + if (dtr & 2) + flag |= TIOCM_DSR; + if (dtr & 4) + flag |= TIOCM_CD; + return flag; +} + +static int moxa_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct moxa_port *ch; + int port; + int dtr, rts; + + port = tty->index; + mutex_lock(&moxa_openlock); + ch = tty->driver_data; + if (!ch) { + mutex_unlock(&moxa_openlock); + return -EINVAL; + } + + MoxaPortGetLineOut(ch, &dtr, &rts); + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + MoxaPortLineCtrl(ch, dtr, rts); + mutex_unlock(&moxa_openlock); + return 0; +} + +static void moxa_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + moxa_set_tty_param(tty, old_termios); + if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty)) + wake_up_interruptible(&ch->port.open_wait); +} + +static void moxa_stop(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + MoxaPortTxDisable(ch); + set_bit(TXSTOPPED, &ch->statusflags); +} + + +static void moxa_start(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + + if (!(ch->statusflags & TXSTOPPED)) + return; + + MoxaPortTxEnable(ch); + clear_bit(TXSTOPPED, &ch->statusflags); +} + +static void moxa_hangup(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + tty_port_hangup(&ch->port); +} + +static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) +{ + struct tty_struct *tty; + unsigned long flags; + dcd = !!dcd; + + spin_lock_irqsave(&p->port.lock, flags); + if (dcd != p->DCDState) { + p->DCDState = dcd; + spin_unlock_irqrestore(&p->port.lock, flags); + tty = tty_port_tty_get(&p->port); + if (tty && C_CLOCAL(tty) && !dcd) + tty_hangup(tty); + tty_kref_put(tty); + } + else + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static int moxa_poll_port(struct moxa_port *p, unsigned int handle, + u16 __iomem *ip) +{ + struct tty_struct *tty = tty_port_tty_get(&p->port); + void __iomem *ofsAddr; + unsigned int inited = p->port.flags & ASYNC_INITIALIZED; + u16 intr; + + if (tty) { + if (test_bit(EMPTYWAIT, &p->statusflags) && + MoxaPortTxQueue(p) == 0) { + clear_bit(EMPTYWAIT, &p->statusflags); + tty_wakeup(tty); + } + if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped && + MoxaPortTxQueue(p) <= WAKEUP_CHARS) { + clear_bit(LOWWAIT, &p->statusflags); + tty_wakeup(tty); + } + + if (inited && !test_bit(TTY_THROTTLED, &tty->flags) && + MoxaPortRxQueue(p) > 0) { /* RX */ + MoxaPortReadData(p); + tty_schedule_flip(tty); + } + } else { + clear_bit(EMPTYWAIT, &p->statusflags); + MoxaPortFlushData(p, 0); /* flush RX */ + } + + if (!handle) /* nothing else to do */ + goto put; + + intr = readw(ip); /* port irq status */ + if (intr == 0) + goto put; + + writew(0, ip); /* ACK port */ + ofsAddr = p->tableAddr; + if (intr & IntrTx) /* disable tx intr */ + writew(readw(ofsAddr + HostStat) & ~WakeupTx, + ofsAddr + HostStat); + + if (!inited) + goto put; + + if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */ + tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_schedule_flip(tty); + } + + if (intr & IntrLine) + moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state); +put: + tty_kref_put(tty); + + return 0; +} + +static void moxa_poll(unsigned long ignored) +{ + struct moxa_board_conf *brd; + u16 __iomem *ip; + unsigned int card, port, served = 0; + + spin_lock(&moxa_lock); + for (card = 0; card < MAX_BOARDS; card++) { + brd = &moxa_boards[card]; + if (!brd->ready) + continue; + + served++; + + ip = NULL; + if (readb(brd->intPend) == 0xff) + ip = brd->intTable + readb(brd->intNdx); + + for (port = 0; port < brd->numPorts; port++) + moxa_poll_port(&brd->ports[port], !!ip, ip + port); + + if (ip) + writeb(0, brd->intPend); /* ACK */ + + if (moxaLowWaterChk) { + struct moxa_port *p = brd->ports; + for (port = 0; port < brd->numPorts; port++, p++) + if (p->lowChkFlag) { + p->lowChkFlag = 0; + moxa_low_water_check(p->tableAddr); + } + } + } + moxaLowWaterChk = 0; + + if (served) + mod_timer(&moxaTimer, jiffies + HZ / 50); + spin_unlock(&moxa_lock); +} + +/******************************************************************************/ + +static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios) +{ + register struct ktermios *ts = tty->termios; + struct moxa_port *ch = tty->driver_data; + int rts, cts, txflow, rxflow, xany, baud; + + rts = cts = txflow = rxflow = xany = 0; + if (ts->c_cflag & CRTSCTS) + rts = cts = 1; + if (ts->c_iflag & IXON) + txflow = 1; + if (ts->c_iflag & IXOFF) + rxflow = 1; + if (ts->c_iflag & IXANY) + xany = 1; + + /* Clear the features we don't support */ + ts->c_cflag &= ~CMSPAR; + MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany); + baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty)); + if (baud == -1) + baud = tty_termios_baud_rate(old_termios); + /* Not put the baud rate into the termios data */ + tty_encode_baud_rate(tty, baud, baud); +} + +/***************************************************************************** + * Driver level functions: * + *****************************************************************************/ + +static void MoxaPortFlushData(struct moxa_port *port, int mode) +{ + void __iomem *ofsAddr; + if (mode < 0 || mode > 2) + return; + ofsAddr = port->tableAddr; + moxafunc(ofsAddr, FC_FlushQueue, mode); + if (mode != 1) { + port->lowChkFlag = 0; + moxa_low_water_check(ofsAddr); + } +} + +/* + * Moxa Port Number Description: + * + * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And, + * the port number using in MOXA driver functions will be 0 to 31 for + * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96 + * to 127 for fourth. For example, if you setup three MOXA boards, + * first board is C218, second board is C320-16 and third board is + * C320-32. The port number of first board (C218 - 8 ports) is from + * 0 to 7. The port number of second board (C320 - 16 ports) is form + * 32 to 47. The port number of third board (C320 - 32 ports) is from + * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to + * 127 will be invalid. + * + * + * Moxa Functions Description: + * + * Function 1: Driver initialization routine, this routine must be + * called when initialized driver. + * Syntax: + * void MoxaDriverInit(); + * + * + * Function 2: Moxa driver private IOCTL command processing. + * Syntax: + * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port); + * + * unsigned int cmd : IOCTL command + * unsigned long arg : IOCTL argument + * int port : port number (0 - 127) + * + * return: 0 (OK) + * -EINVAL + * -ENOIOCTLCMD + * + * + * Function 6: Enable this port to start Tx/Rx data. + * Syntax: + * void MoxaPortEnable(int port); + * int port : port number (0 - 127) + * + * + * Function 7: Disable this port + * Syntax: + * void MoxaPortDisable(int port); + * int port : port number (0 - 127) + * + * + * Function 10: Setting baud rate of this port. + * Syntax: + * speed_t MoxaPortSetBaud(int port, speed_t baud); + * int port : port number (0 - 127) + * long baud : baud rate (50 - 115200) + * + * return: 0 : this port is invalid or baud < 50 + * 50 - 115200 : the real baud rate set to the port, if + * the argument baud is large than maximun + * available baud rate, the real setting + * baud rate will be the maximun baud rate. + * + * + * Function 12: Configure the port. + * Syntax: + * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud); + * int port : port number (0 - 127) + * struct ktermios * termio : termio structure pointer + * speed_t baud : baud rate + * + * return: -1 : this port is invalid or termio == NULL + * 0 : setting O.K. + * + * + * Function 13: Get the DTR/RTS state of this port. + * Syntax: + * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); + * int port : port number (0 - 127) + * int * dtrState : pointer to INT to receive the current DTR + * state. (if NULL, this function will not + * write to this address) + * int * rtsState : pointer to INT to receive the current RTS + * state. (if NULL, this function will not + * write to this address) + * + * return: -1 : this port is invalid + * 0 : O.K. + * + * + * Function 14: Setting the DTR/RTS output state of this port. + * Syntax: + * void MoxaPortLineCtrl(int port, int dtrState, int rtsState); + * int port : port number (0 - 127) + * int dtrState : DTR output state (0: off, 1: on) + * int rtsState : RTS output state (0: off, 1: on) + * + * + * Function 15: Setting the flow control of this port. + * Syntax: + * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow, + * int txFlow,int xany); + * int port : port number (0 - 127) + * int rtsFlow : H/W RTS flow control (0: no, 1: yes) + * int ctsFlow : H/W CTS flow control (0: no, 1: yes) + * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes) + * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes) + * int xany : S/W XANY flow control (0: no, 1: yes) + * + * + * Function 16: Get ths line status of this port + * Syntax: + * int MoxaPortLineStatus(int port); + * int port : port number (0 - 127) + * + * return: Bit 0 - CTS state (0: off, 1: on) + * Bit 1 - DSR state (0: off, 1: on) + * Bit 2 - DCD state (0: off, 1: on) + * + * + * Function 19: Flush the Rx/Tx buffer data of this port. + * Syntax: + * void MoxaPortFlushData(int port, int mode); + * int port : port number (0 - 127) + * int mode + * 0 : flush the Rx buffer + * 1 : flush the Tx buffer + * 2 : flush the Rx and Tx buffer + * + * + * Function 20: Write data. + * Syntax: + * int MoxaPortWriteData(int port, unsigned char * buffer, int length); + * int port : port number (0 - 127) + * unsigned char * buffer : pointer to write data buffer. + * int length : write data length + * + * return: 0 - length : real write data length + * + * + * Function 21: Read data. + * Syntax: + * int MoxaPortReadData(int port, struct tty_struct *tty); + * int port : port number (0 - 127) + * struct tty_struct *tty : tty for data + * + * return: 0 - length : real read data length + * + * + * Function 24: Get the Tx buffer current queued data bytes + * Syntax: + * int MoxaPortTxQueue(int port); + * int port : port number (0 - 127) + * + * return: .. : Tx buffer current queued data bytes + * + * + * Function 25: Get the Tx buffer current free space + * Syntax: + * int MoxaPortTxFree(int port); + * int port : port number (0 - 127) + * + * return: .. : Tx buffer current free space + * + * + * Function 26: Get the Rx buffer current queued data bytes + * Syntax: + * int MoxaPortRxQueue(int port); + * int port : port number (0 - 127) + * + * return: .. : Rx buffer current queued data bytes + * + * + * Function 28: Disable port data transmission. + * Syntax: + * void MoxaPortTxDisable(int port); + * int port : port number (0 - 127) + * + * + * Function 29: Enable port data transmission. + * Syntax: + * void MoxaPortTxEnable(int port); + * int port : port number (0 - 127) + * + * + * Function 31: Get the received BREAK signal count and reset it. + * Syntax: + * int MoxaPortResetBrkCnt(int port); + * int port : port number (0 - 127) + * + * return: 0 - .. : BREAK signal count + * + * + */ + +static void MoxaPortEnable(struct moxa_port *port) +{ + void __iomem *ofsAddr; + u16 lowwater = 512; + + ofsAddr = port->tableAddr; + writew(lowwater, ofsAddr + Low_water); + if (MOXA_IS_320(port->board)) + moxafunc(ofsAddr, FC_SetBreakIrq, 0); + else + writew(readw(ofsAddr + HostStat) | WakeupBreak, + ofsAddr + HostStat); + + moxafunc(ofsAddr, FC_SetLineIrq, Magic_code); + moxafunc(ofsAddr, FC_FlushQueue, 2); + + moxafunc(ofsAddr, FC_EnableCH, Magic_code); + MoxaPortLineStatus(port); +} + +static void MoxaPortDisable(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + + moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */ + moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code); + writew(0, ofsAddr + HostStat); + moxafunc(ofsAddr, FC_DisableCH, Magic_code); +} + +static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud) +{ + void __iomem *ofsAddr = port->tableAddr; + unsigned int clock, val; + speed_t max; + + max = MOXA_IS_320(port->board) ? 460800 : 921600; + if (baud < 50) + return 0; + if (baud > max) + baud = max; + clock = 921600; + val = clock / baud; + moxafunc(ofsAddr, FC_SetBaud, val); + baud = clock / val; + return baud; +} + +static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio, + speed_t baud) +{ + void __iomem *ofsAddr; + tcflag_t cflag; + tcflag_t mode = 0; + + ofsAddr = port->tableAddr; + cflag = termio->c_cflag; /* termio->c_cflag */ + + mode = termio->c_cflag & CSIZE; + if (mode == CS5) + mode = MX_CS5; + else if (mode == CS6) + mode = MX_CS6; + else if (mode == CS7) + mode = MX_CS7; + else if (mode == CS8) + mode = MX_CS8; + + if (termio->c_cflag & CSTOPB) { + if (mode == MX_CS5) + mode |= MX_STOP15; + else + mode |= MX_STOP2; + } else + mode |= MX_STOP1; + + if (termio->c_cflag & PARENB) { + if (termio->c_cflag & PARODD) + mode |= MX_PARODD; + else + mode |= MX_PAREVEN; + } else + mode |= MX_PARNONE; + + moxafunc(ofsAddr, FC_SetDataMode, (u16)mode); + + if (MOXA_IS_320(port->board) && baud >= 921600) + return -1; + + baud = MoxaPortSetBaud(port, baud); + + if (termio->c_iflag & (IXON | IXOFF | IXANY)) { + spin_lock_irq(&moxafunc_lock); + writeb(termio->c_cc[VSTART], ofsAddr + FuncArg); + writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1); + writeb(FC_SetXonXoff, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + spin_unlock_irq(&moxafunc_lock); + + } + return baud; +} + +static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState, + int *rtsState) +{ + if (dtrState) + *dtrState = !!(port->lineCtrl & DTR_ON); + if (rtsState) + *rtsState = !!(port->lineCtrl & RTS_ON); + + return 0; +} + +static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts) +{ + u8 mode = 0; + + if (dtr) + mode |= DTR_ON; + if (rts) + mode |= RTS_ON; + port->lineCtrl = mode; + moxafunc(port->tableAddr, FC_LineControl, mode); +} + +static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts, + int txflow, int rxflow, int txany) +{ + int mode = 0; + + if (rts) + mode |= RTS_FlowCtl; + if (cts) + mode |= CTS_FlowCtl; + if (txflow) + mode |= Tx_FlowCtl; + if (rxflow) + mode |= Rx_FlowCtl; + if (txany) + mode |= IXM_IXANY; + moxafunc(port->tableAddr, FC_SetFlowCtl, mode); +} + +static int MoxaPortLineStatus(struct moxa_port *port) +{ + void __iomem *ofsAddr; + int val; + + ofsAddr = port->tableAddr; + if (MOXA_IS_320(port->board)) + val = moxafuncret(ofsAddr, FC_LineStatus, 0); + else + val = readw(ofsAddr + FlagStat) >> 4; + val &= 0x0B; + if (val & 8) + val |= 4; + moxa_new_dcdstate(port, val & 8); + val &= 7; + return val; +} + +static int MoxaPortWriteData(struct tty_struct *tty, + const unsigned char *buffer, int len) +{ + struct moxa_port *port = tty->driver_data; + void __iomem *baseAddr, *ofsAddr, *ofs; + unsigned int c, total; + u16 head, tail, tx_mask, spage, epage; + u16 pageno, pageofs, bufhead; + + ofsAddr = port->tableAddr; + baseAddr = port->board->basemem; + tx_mask = readw(ofsAddr + TX_mask); + spage = readw(ofsAddr + Page_txb); + epage = readw(ofsAddr + EndPage_txb); + tail = readw(ofsAddr + TXwptr); + head = readw(ofsAddr + TXrptr); + c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask); + if (c > len) + c = len; + moxaLog.txcnt[port->port.tty->index] += c; + total = c; + if (spage == epage) { + bufhead = readw(ofsAddr + Ofs_txb); + writew(spage, baseAddr + Control_reg); + while (c > 0) { + if (head > tail) + len = head - tail - 1; + else + len = tx_mask + 1 - tail; + len = (c > len) ? len : c; + ofs = baseAddr + DynPage_addr + bufhead + tail; + memcpy_toio(ofs, buffer, len); + buffer += len; + tail = (tail + len) & tx_mask; + c -= len; + } + } else { + pageno = spage + (tail >> 13); + pageofs = tail & Page_mask; + while (c > 0) { + len = Page_size - pageofs; + if (len > c) + len = c; + writeb(pageno, baseAddr + Control_reg); + ofs = baseAddr + DynPage_addr + pageofs; + memcpy_toio(ofs, buffer, len); + buffer += len; + if (++pageno == epage) + pageno = spage; + pageofs = 0; + c -= len; + } + tail = (tail + total) & tx_mask; + } + writew(tail, ofsAddr + TXwptr); + writeb(1, ofsAddr + CD180TXirq); /* start to send */ + return total; +} + +static int MoxaPortReadData(struct moxa_port *port) +{ + struct tty_struct *tty = port->port.tty; + unsigned char *dst; + void __iomem *baseAddr, *ofsAddr, *ofs; + unsigned int count, len, total; + u16 tail, rx_mask, spage, epage; + u16 pageno, pageofs, bufhead, head; + + ofsAddr = port->tableAddr; + baseAddr = port->board->basemem; + head = readw(ofsAddr + RXrptr); + tail = readw(ofsAddr + RXwptr); + rx_mask = readw(ofsAddr + RX_mask); + spage = readw(ofsAddr + Page_rxb); + epage = readw(ofsAddr + EndPage_rxb); + count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1); + if (count == 0) + return 0; + + total = count; + moxaLog.rxcnt[tty->index] += total; + if (spage == epage) { + bufhead = readw(ofsAddr + Ofs_rxb); + writew(spage, baseAddr + Control_reg); + while (count > 0) { + ofs = baseAddr + DynPage_addr + bufhead + head; + len = (tail >= head) ? (tail - head) : + (rx_mask + 1 - head); + len = tty_prepare_flip_string(tty, &dst, + min(len, count)); + memcpy_fromio(dst, ofs, len); + head = (head + len) & rx_mask; + count -= len; + } + } else { + pageno = spage + (head >> 13); + pageofs = head & Page_mask; + while (count > 0) { + writew(pageno, baseAddr + Control_reg); + ofs = baseAddr + DynPage_addr + pageofs; + len = tty_prepare_flip_string(tty, &dst, + min(Page_size - pageofs, count)); + memcpy_fromio(dst, ofs, len); + + count -= len; + pageofs = (pageofs + len) & Page_mask; + if (pageofs == 0 && ++pageno == epage) + pageno = spage; + } + head = (head + total) & rx_mask; + } + writew(head, ofsAddr + RXrptr); + if (readb(ofsAddr + FlagStat) & Xoff_state) { + moxaLowWaterChk = 1; + port->lowChkFlag = 1; + } + return total; +} + + +static int MoxaPortTxQueue(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + TXrptr); + wptr = readw(ofsAddr + TXwptr); + mask = readw(ofsAddr + TX_mask); + return (wptr - rptr) & mask; +} + +static int MoxaPortTxFree(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + TXrptr); + wptr = readw(ofsAddr + TXwptr); + mask = readw(ofsAddr + TX_mask); + return mask - ((wptr - rptr) & mask); +} + +static int MoxaPortRxQueue(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + RXrptr); + wptr = readw(ofsAddr + RXwptr); + mask = readw(ofsAddr + RX_mask); + return (wptr - rptr) & mask; +} + +static void MoxaPortTxDisable(struct moxa_port *port) +{ + moxafunc(port->tableAddr, FC_SetXoffState, Magic_code); +} + +static void MoxaPortTxEnable(struct moxa_port *port) +{ + moxafunc(port->tableAddr, FC_SetXonState, Magic_code); +} + +static int moxa_get_serial_info(struct moxa_port *info, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp = { + .type = info->type, + .line = info->port.tty->index, + .flags = info->port.flags, + .baud_base = 921600, + .close_delay = info->port.close_delay + }; + return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; +} + + +static int moxa_set_serial_info(struct moxa_port *info, + struct serial_struct __user *new_info) +{ + struct serial_struct new_serial; + + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + if (new_serial.irq != 0 || new_serial.port != 0 || + new_serial.custom_divisor != 0 || + new_serial.baud_base != 921600) + return -EPERM; + + if (!capable(CAP_SYS_ADMIN)) { + if (((new_serial.flags & ~ASYNC_USR_MASK) != + (info->port.flags & ~ASYNC_USR_MASK))) + return -EPERM; + } else + info->port.close_delay = new_serial.close_delay * HZ / 100; + + new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS); + new_serial.flags |= (info->port.flags & ASYNC_FLAGS); + + MoxaSetFifo(info, new_serial.type == PORT_16550A); + + info->type = new_serial.type; + return 0; +} + + + +/***************************************************************************** + * Static local functions: * + *****************************************************************************/ + +static void MoxaSetFifo(struct moxa_port *port, int enable) +{ + void __iomem *ofsAddr = port->tableAddr; + + if (!enable) { + moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0); + moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1); + } else { + moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3); + moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16); + } +} diff --git a/drivers/tty/moxa.h b/drivers/tty/moxa.h new file mode 100644 index 000000000000..87d16ce57be7 --- /dev/null +++ b/drivers/tty/moxa.h @@ -0,0 +1,304 @@ +#ifndef MOXA_H_FILE +#define MOXA_H_FILE + +#define MOXA 0x400 +#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */ +#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */ +#define MOXA_GETDATACOUNT (MOXA + 23) +#define MOXA_GET_IOQUEUE (MOXA + 27) +#define MOXA_FLUSH_QUEUE (MOXA + 28) +#define MOXA_GETMSTATUS (MOXA + 65) + +/* + * System Configuration + */ + +#define Magic_code 0x404 + +/* + * for C218 BIOS initialization + */ +#define C218_ConfBase 0x800 +#define C218_status (C218_ConfBase + 0) /* BIOS running status */ +#define C218_diag (C218_ConfBase + 2) /* diagnostic status */ +#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */ +#define C218DLoad_len (C218_ConfBase + 6) /* WORD */ +#define C218check_sum (C218_ConfBase + 8) /* BYTE */ +#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */ +#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */ +#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */ +#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */ +#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */ + +#define C218_LoadBuf 0x0F00 +#define C218_KeyCode 0x218 +#define CP204J_KeyCode 0x204 + +/* + * for C320 BIOS initialization + */ +#define C320_ConfBase 0x800 +#define C320_LoadBuf 0x0f00 +#define STS_init 0x05 /* for C320_status */ + +#define C320_status C320_ConfBase + 0 /* BIOS running status */ +#define C320_diag C320_ConfBase + 2 /* diagnostic status */ +#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */ +#define C320DLoad_len C320_ConfBase + 6 /* WORD */ +#define C320check_sum C320_ConfBase + 8 /* WORD */ +#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */ +#define C320bapi_len C320_ConfBase + 0x0c /* WORD */ +#define C320UART_no C320_ConfBase + 0x0e /* WORD */ + +#define C320_KeyCode 0x320 + +#define FixPage_addr 0x0000 /* starting addr of static page */ +#define DynPage_addr 0x2000 /* starting addr of dynamic page */ +#define C218_start 0x3000 /* starting addr of C218 BIOS prg */ +#define Control_reg 0x1ff0 /* select page and reset control */ +#define HW_reset 0x80 + +/* + * Function Codes + */ +#define FC_CardReset 0x80 +#define FC_ChannelReset 1 /* C320 firmware not supported */ +#define FC_EnableCH 2 +#define FC_DisableCH 3 +#define FC_SetParam 4 +#define FC_SetMode 5 +#define FC_SetRate 6 +#define FC_LineControl 7 +#define FC_LineStatus 8 +#define FC_XmitControl 9 +#define FC_FlushQueue 10 +#define FC_SendBreak 11 +#define FC_StopBreak 12 +#define FC_LoopbackON 13 +#define FC_LoopbackOFF 14 +#define FC_ClrIrqTable 15 +#define FC_SendXon 16 +#define FC_SetTermIrq 17 /* C320 firmware not supported */ +#define FC_SetCntIrq 18 /* C320 firmware not supported */ +#define FC_SetBreakIrq 19 +#define FC_SetLineIrq 20 +#define FC_SetFlowCtl 21 +#define FC_GenIrq 22 +#define FC_InCD180 23 +#define FC_OutCD180 24 +#define FC_InUARTreg 23 +#define FC_OutUARTreg 24 +#define FC_SetXonXoff 25 +#define FC_OutCD180CCR 26 +#define FC_ExtIQueue 27 +#define FC_ExtOQueue 28 +#define FC_ClrLineIrq 29 +#define FC_HWFlowCtl 30 +#define FC_GetClockRate 35 +#define FC_SetBaud 36 +#define FC_SetDataMode 41 +#define FC_GetCCSR 43 +#define FC_GetDataError 45 +#define FC_RxControl 50 +#define FC_ImmSend 51 +#define FC_SetXonState 52 +#define FC_SetXoffState 53 +#define FC_SetRxFIFOTrig 54 +#define FC_SetTxFIFOCnt 55 +#define FC_UnixRate 56 +#define FC_UnixResetTimer 57 + +#define RxFIFOTrig1 0 +#define RxFIFOTrig4 1 +#define RxFIFOTrig8 2 +#define RxFIFOTrig14 3 + +/* + * Dual-Ported RAM + */ +#define DRAM_global 0 +#define INT_data (DRAM_global + 0) +#define Config_base (DRAM_global + 0x108) + +#define IRQindex (INT_data + 0) +#define IRQpending (INT_data + 4) +#define IRQtable (INT_data + 8) + +/* + * Interrupt Status + */ +#define IntrRx 0x01 /* receiver data O.K. */ +#define IntrTx 0x02 /* transmit buffer empty */ +#define IntrFunc 0x04 /* function complete */ +#define IntrBreak 0x08 /* received break */ +#define IntrLine 0x10 /* line status change + for transmitter */ +#define IntrIntr 0x20 /* received INTR code */ +#define IntrQuit 0x40 /* received QUIT code */ +#define IntrEOF 0x80 /* received EOF code */ + +#define IntrRxTrigger 0x100 /* rx data count reach tigger value */ +#define IntrTxTrigger 0x200 /* tx data count below trigger value */ + +#define Magic_no (Config_base + 0) +#define Card_model_no (Config_base + 2) +#define Total_ports (Config_base + 4) +#define Module_cnt (Config_base + 8) +#define Module_no (Config_base + 10) +#define Timer_10ms (Config_base + 14) +#define Disable_IRQ (Config_base + 20) +#define TMS320_PORT1 (Config_base + 22) +#define TMS320_PORT2 (Config_base + 24) +#define TMS320_CLOCK (Config_base + 26) + +/* + * DATA BUFFER in DRAM + */ +#define Extern_table 0x400 /* Base address of the external table + (24 words * 64) total 3K bytes + (24 words * 128) total 6K bytes */ +#define Extern_size 0x60 /* 96 bytes */ +#define RXrptr 0x00 /* read pointer for RX buffer */ +#define RXwptr 0x02 /* write pointer for RX buffer */ +#define TXrptr 0x04 /* read pointer for TX buffer */ +#define TXwptr 0x06 /* write pointer for TX buffer */ +#define HostStat 0x08 /* IRQ flag and general flag */ +#define FlagStat 0x0A +#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */ + /* x x x x | | | | */ + /* | | | + CTS flow */ + /* | | +--- RTS flow */ + /* | +------ TX Xon/Xoff */ + /* +--------- RX Xon/Xoff */ +#define Break_cnt 0x0E /* received break count */ +#define CD180TXirq 0x10 /* if non-0: enable TX irq */ +#define RX_mask 0x12 +#define TX_mask 0x14 +#define Ofs_rxb 0x16 +#define Ofs_txb 0x18 +#define Page_rxb 0x1A +#define Page_txb 0x1C +#define EndPage_rxb 0x1E +#define EndPage_txb 0x20 +#define Data_error 0x22 +#define RxTrigger 0x28 +#define TxTrigger 0x2a + +#define rRXwptr 0x34 +#define Low_water 0x36 + +#define FuncCode 0x40 +#define FuncArg 0x42 +#define FuncArg1 0x44 + +#define C218rx_size 0x2000 /* 8K bytes */ +#define C218tx_size 0x8000 /* 32K bytes */ + +#define C218rx_mask (C218rx_size - 1) +#define C218tx_mask (C218tx_size - 1) + +#define C320p8rx_size 0x2000 +#define C320p8tx_size 0x8000 +#define C320p8rx_mask (C320p8rx_size - 1) +#define C320p8tx_mask (C320p8tx_size - 1) + +#define C320p16rx_size 0x2000 +#define C320p16tx_size 0x4000 +#define C320p16rx_mask (C320p16rx_size - 1) +#define C320p16tx_mask (C320p16tx_size - 1) + +#define C320p24rx_size 0x2000 +#define C320p24tx_size 0x2000 +#define C320p24rx_mask (C320p24rx_size - 1) +#define C320p24tx_mask (C320p24tx_size - 1) + +#define C320p32rx_size 0x1000 +#define C320p32tx_size 0x1000 +#define C320p32rx_mask (C320p32rx_size - 1) +#define C320p32tx_mask (C320p32tx_size - 1) + +#define Page_size 0x2000U +#define Page_mask (Page_size - 1) +#define C218rx_spage 3 +#define C218tx_spage 4 +#define C218rx_pageno 1 +#define C218tx_pageno 4 +#define C218buf_pageno 5 + +#define C320p8rx_spage 3 +#define C320p8tx_spage 4 +#define C320p8rx_pgno 1 +#define C320p8tx_pgno 4 +#define C320p8buf_pgno 5 + +#define C320p16rx_spage 3 +#define C320p16tx_spage 4 +#define C320p16rx_pgno 1 +#define C320p16tx_pgno 2 +#define C320p16buf_pgno 3 + +#define C320p24rx_spage 3 +#define C320p24tx_spage 4 +#define C320p24rx_pgno 1 +#define C320p24tx_pgno 1 +#define C320p24buf_pgno 2 + +#define C320p32rx_spage 3 +#define C320p32tx_ofs C320p32rx_size +#define C320p32tx_spage 3 +#define C320p32buf_pgno 1 + +/* + * Host Status + */ +#define WakeupRx 0x01 +#define WakeupTx 0x02 +#define WakeupBreak 0x08 +#define WakeupLine 0x10 +#define WakeupIntr 0x20 +#define WakeupQuit 0x40 +#define WakeupEOF 0x80 /* used in VTIME control */ +#define WakeupRxTrigger 0x100 +#define WakeupTxTrigger 0x200 +/* + * Flag status + */ +#define Rx_over 0x01 +#define Xoff_state 0x02 +#define Tx_flowOff 0x04 +#define Tx_enable 0x08 +#define CTS_state 0x10 +#define DSR_state 0x20 +#define DCD_state 0x80 +/* + * FlowControl + */ +#define CTS_FlowCtl 1 +#define RTS_FlowCtl 2 +#define Tx_FlowCtl 4 +#define Rx_FlowCtl 8 +#define IXM_IXANY 0x10 + +#define LowWater 128 + +#define DTR_ON 1 +#define RTS_ON 2 +#define CTS_ON 1 +#define DSR_ON 2 +#define DCD_ON 8 + +/* mode definition */ +#define MX_CS8 0x03 +#define MX_CS7 0x02 +#define MX_CS6 0x01 +#define MX_CS5 0x00 + +#define MX_STOP1 0x00 +#define MX_STOP15 0x04 +#define MX_STOP2 0x08 + +#define MX_PARNONE 0x00 +#define MX_PAREVEN 0x40 +#define MX_PARODD 0xC0 + +#endif diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c new file mode 100644 index 000000000000..d188f378684d --- /dev/null +++ b/drivers/tty/mxser.c @@ -0,0 +1,2757 @@ +/* + * mxser.c -- MOXA Smartio/Industio family multiport serial driver. + * + * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). + * Copyright (C) 2006-2008 Jiri Slaby + * + * This code is loosely based on the 1.8 moxa driver which is based on + * Linux serial driver, written by Linus Torvalds, Theodore T'so and + * others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox + * . The original 1.8 code is available on + * www.moxa.com. + * - Fixed x86_64 cleanness + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "mxser.h" + +#define MXSER_VERSION "2.0.5" /* 1.14 */ +#define MXSERMAJOR 174 + +#define MXSER_BOARDS 4 /* Max. boards */ +#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ +#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) +#define MXSER_ISR_PASS_LIMIT 100 + +/*CheckIsMoxaMust return value*/ +#define MOXA_OTHER_UART 0x00 +#define MOXA_MUST_MU150_HWID 0x01 +#define MOXA_MUST_MU860_HWID 0x02 + +#define WAKEUP_CHARS 256 + +#define UART_MCR_AFE 0x20 +#define UART_LSR_SPECIAL 0x1E + +#define PCI_DEVICE_ID_POS104UL 0x1044 +#define PCI_DEVICE_ID_CB108 0x1080 +#define PCI_DEVICE_ID_CP102UF 0x1023 +#define PCI_DEVICE_ID_CP112UL 0x1120 +#define PCI_DEVICE_ID_CB114 0x1142 +#define PCI_DEVICE_ID_CP114UL 0x1143 +#define PCI_DEVICE_ID_CB134I 0x1341 +#define PCI_DEVICE_ID_CP138U 0x1380 + + +#define C168_ASIC_ID 1 +#define C104_ASIC_ID 2 +#define C102_ASIC_ID 0xB +#define CI132_ASIC_ID 4 +#define CI134_ASIC_ID 3 +#define CI104J_ASIC_ID 5 + +#define MXSER_HIGHBAUD 1 +#define MXSER_HAS2 2 + +/* This is only for PCI */ +static const struct { + int type; + int tx_fifo; + int rx_fifo; + int xmit_fifo_size; + int rx_high_water; + int rx_trigger; + int rx_low_water; + long max_baud; +} Gpci_uart_info[] = { + {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, + {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, + {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} +}; +#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) + +struct mxser_cardinfo { + char *name; + unsigned int nports; + unsigned int flags; +}; + +static const struct mxser_cardinfo mxser_cards[] = { +/* 0*/ { "C168 series", 8, }, + { "C104 series", 4, }, + { "CI-104J series", 4, }, + { "C168H/PCI series", 8, }, + { "C104H/PCI series", 4, }, +/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */ + { "CI-132 series", 4, MXSER_HAS2 }, + { "CI-134 series", 4, }, + { "CP-132 series", 2, }, + { "CP-114 series", 4, }, +/*10*/ { "CT-114 series", 4, }, + { "CP-102 series", 2, MXSER_HIGHBAUD }, + { "CP-104U series", 4, }, + { "CP-168U series", 8, }, + { "CP-132U series", 2, }, +/*15*/ { "CP-134U series", 4, }, + { "CP-104JU series", 4, }, + { "Moxa UC7000 Serial", 8, }, /* RC7000 */ + { "CP-118U series", 8, }, + { "CP-102UL series", 2, }, +/*20*/ { "CP-102U series", 2, }, + { "CP-118EL series", 8, }, + { "CP-168EL series", 8, }, + { "CP-104EL series", 4, }, + { "CB-108 series", 8, }, +/*25*/ { "CB-114 series", 4, }, + { "CB-134I series", 4, }, + { "CP-138U series", 8, }, + { "POS-104UL series", 4, }, + { "CP-114UL series", 4, }, +/*30*/ { "CP-102UF series", 2, }, + { "CP-112UL series", 2, }, +}; + +/* driver_data correspond to the lines in the structure above + see also ISA probe function before you change something */ +static struct pci_device_id mxser_pcibrds[] = { + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 }, + { } +}; +MODULE_DEVICE_TABLE(pci, mxser_pcibrds); + +static unsigned long ioaddr[MXSER_BOARDS]; +static int ttymajor = MXSERMAJOR; + +/* Variables for insmod */ + +MODULE_AUTHOR("Casper Yang"); +MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); +module_param_array(ioaddr, ulong, NULL, 0); +MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); +module_param(ttymajor, int, 0); +MODULE_LICENSE("GPL"); + +struct mxser_log { + int tick; + unsigned long rxcnt[MXSER_PORTS]; + unsigned long txcnt[MXSER_PORTS]; +}; + +struct mxser_mon { + unsigned long rxcnt; + unsigned long txcnt; + unsigned long up_rxcnt; + unsigned long up_txcnt; + int modem_status; + unsigned char hold_reason; +}; + +struct mxser_mon_ext { + unsigned long rx_cnt[32]; + unsigned long tx_cnt[32]; + unsigned long up_rxcnt[32]; + unsigned long up_txcnt[32]; + int modem_status[32]; + + long baudrate[32]; + int databits[32]; + int stopbits[32]; + int parity[32]; + int flowctrl[32]; + int fifo[32]; + int iftype[32]; +}; + +struct mxser_board; + +struct mxser_port { + struct tty_port port; + struct mxser_board *board; + + unsigned long ioaddr; + unsigned long opmode_ioaddr; + int max_baud; + + int rx_high_water; + int rx_trigger; /* Rx fifo trigger level */ + int rx_low_water; + int baud_base; /* max. speed */ + int type; /* UART type */ + + int x_char; /* xon/xoff character */ + int IER; /* Interrupt Enable Register */ + int MCR; /* Modem control register */ + + unsigned char stop_rx; + unsigned char ldisc_stop_rx; + + int custom_divisor; + unsigned char err_shadow; + + struct async_icount icount; /* kernel counters for 4 input interrupts */ + int timeout; + + int read_status_mask; + int ignore_status_mask; + int xmit_fifo_size; + int xmit_head; + int xmit_tail; + int xmit_cnt; + + struct ktermios normal_termios; + + struct mxser_mon mon_data; + + spinlock_t slock; +}; + +struct mxser_board { + unsigned int idx; + int irq; + const struct mxser_cardinfo *info; + unsigned long vector; + unsigned long vector_mask; + + int chip_flag; + int uart_type; + + struct mxser_port ports[MXSER_PORTS_PER_BOARD]; +}; + +struct mxser_mstatus { + tcflag_t cflag; + int cts; + int dsr; + int ri; + int dcd; +}; + +static struct mxser_board mxser_boards[MXSER_BOARDS]; +static struct tty_driver *mxvar_sdriver; +static struct mxser_log mxvar_log; +static int mxser_set_baud_method[MXSER_PORTS + 1]; + +static void mxser_enable_must_enchance_mode(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr |= MOXA_MUST_EFR_EFRB_ENABLE; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static void mxser_disable_must_enchance_mode(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} +#endif + +static void mxser_set_must_xon1_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK0; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_XON1_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK0; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_set_must_fifo_value(struct mxser_port *info) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(info->ioaddr + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR); + + efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK1; + + outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER); + outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); + outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); + outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); + outb(oldlcr, info->ioaddr + UART_LCR); +} + +static void mxser_set_must_enum_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK2; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_ENUM_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK2; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + *pId = inb(baseio + MOXA_MUST_HWID_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} +#endif + +static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_enable_must_tx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_TX_MASK; + efr |= MOXA_MUST_EFR_SF_TX1; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_disable_must_tx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_TX_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_enable_must_rx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_RX_MASK; + efr |= MOXA_MUST_EFR_SF_RX1; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_disable_must_rx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_RX_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static int __devinit CheckIsMoxaMust(unsigned long io) +{ + u8 oldmcr, hwid; + int i; + + outb(0, io + UART_LCR); + mxser_disable_must_enchance_mode(io); + oldmcr = inb(io + UART_MCR); + outb(0, io + UART_MCR); + mxser_set_must_xon1_value(io, 0x11); + if ((hwid = inb(io + UART_MCR)) != 0) { + outb(oldmcr, io + UART_MCR); + return MOXA_OTHER_UART; + } + + mxser_get_must_hardware_id(io, &hwid); + for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ + if (hwid == Gpci_uart_info[i].type) + return (int)hwid; + } + return MOXA_OTHER_UART; +} +#endif + +static void process_txrx_fifo(struct mxser_port *info) +{ + int i; + + if ((info->type == PORT_16450) || (info->type == PORT_8250)) { + info->rx_trigger = 1; + info->rx_high_water = 1; + info->rx_low_water = 1; + info->xmit_fifo_size = 1; + } else + for (i = 0; i < UART_INFO_NUM; i++) + if (info->board->chip_flag == Gpci_uart_info[i].type) { + info->rx_trigger = Gpci_uart_info[i].rx_trigger; + info->rx_low_water = Gpci_uart_info[i].rx_low_water; + info->rx_high_water = Gpci_uart_info[i].rx_high_water; + info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; + break; + } +} + +static unsigned char mxser_get_msr(int baseaddr, int mode, int port) +{ + static unsigned char mxser_msr[MXSER_PORTS + 1]; + unsigned char status = 0; + + status = inb(baseaddr + UART_MSR); + + mxser_msr[port] &= 0x0F; + mxser_msr[port] |= status; + status = mxser_msr[port]; + if (mode) + mxser_msr[port] = 0; + + return status; +} + +static int mxser_carrier_raised(struct tty_port *port) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; +} + +static void mxser_dtr_rts(struct tty_port *port, int on) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + unsigned long flags; + + spin_lock_irqsave(&mp->slock, flags); + if (on) + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + else + outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), + mp->ioaddr + UART_MCR); + spin_unlock_irqrestore(&mp->slock, flags); +} + +static int mxser_set_baud(struct tty_struct *tty, long newspd) +{ + struct mxser_port *info = tty->driver_data; + int quot = 0, baud; + unsigned char cval; + + if (!info->ioaddr) + return -1; + + if (newspd > info->max_baud) + return -1; + + if (newspd == 134) { + quot = 2 * info->baud_base / 269; + tty_encode_baud_rate(tty, 134, 134); + } else if (newspd) { + quot = info->baud_base / newspd; + if (quot == 0) + quot = 1; + baud = info->baud_base/quot; + tty_encode_baud_rate(tty, baud, baud); + } else { + quot = 0; + } + + info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); + info->timeout += HZ / 50; /* Add .02 seconds of slop */ + + if (quot) { + info->MCR |= UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + } else { + info->MCR &= ~UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + return 0; + } + + cval = inb(info->ioaddr + UART_LCR); + + outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ + + outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ + outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ + outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ + +#ifdef BOTHER + if (C_BAUD(tty) == BOTHER) { + quot = info->baud_base % newspd; + quot *= 8; + if (quot % newspd > newspd / 2) { + quot /= newspd; + quot++; + } else + quot /= newspd; + + mxser_set_must_enum_value(info->ioaddr, quot); + } else +#endif + mxser_set_must_enum_value(info->ioaddr, 0); + + return 0; +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static int mxser_change_speed(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct mxser_port *info = tty->driver_data; + unsigned cflag, cval, fcr; + int ret = 0; + unsigned char status; + + cflag = tty->termios->c_cflag; + if (!info->ioaddr) + return ret; + + if (mxser_set_baud_method[tty->index] == 0) + mxser_set_baud(tty, tty_get_baud_rate(tty)); + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + case CS8: + cval = 0x03; + break; + default: + cval = 0x00; + break; /* too keep GCC shut... */ + } + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; + + if ((info->type == PORT_8250) || (info->type == PORT_16450)) { + if (info->board->chip_flag) { + fcr = UART_FCR_ENABLE_FIFO; + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); + } else + fcr = 0; + } else { + fcr = UART_FCR_ENABLE_FIFO; + if (info->board->chip_flag) { + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); + } else { + switch (info->rx_trigger) { + case 1: + fcr |= UART_FCR_TRIGGER_1; + break; + case 4: + fcr |= UART_FCR_TRIGGER_4; + break; + case 8: + fcr |= UART_FCR_TRIGGER_8; + break; + default: + fcr |= UART_FCR_TRIGGER_14; + break; + } + } + } + + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + info->MCR &= ~UART_MCR_AFE; + if (cflag & CRTSCTS) { + info->port.flags |= ASYNC_CTS_FLOW; + info->IER |= UART_IER_MSI; + if ((info->type == PORT_16550A) || (info->board->chip_flag)) { + info->MCR |= UART_MCR_AFE; + } else { + status = inb(info->ioaddr + UART_MSR); + if (tty->hw_stopped) { + if (status & UART_MSR_CTS) { + tty->hw_stopped = 0; + if (info->type != PORT_16550A && + !info->board->chip_flag) { + outb(info->IER & ~UART_IER_THRI, + info->ioaddr + + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + tty_wakeup(tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + tty->hw_stopped = 1; + if ((info->type != PORT_16550A) && + (!info->board->chip_flag)) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + } + } + } + } else { + info->port.flags &= ~ASYNC_CTS_FLOW; + } + outb(info->MCR, info->ioaddr + UART_MCR); + if (cflag & CLOCAL) { + info->port.flags &= ~ASYNC_CHECK_CD; + } else { + info->port.flags |= ASYNC_CHECK_CD; + info->IER |= UART_IER_MSI; + } + outb(info->IER, info->ioaddr + UART_IER); + + /* + * Set up parity check flag + */ + info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (I_INPCK(tty)) + info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (I_BRKINT(tty) || I_PARMRK(tty)) + info->read_status_mask |= UART_LSR_BI; + + info->ignore_status_mask = 0; + + if (I_IGNBRK(tty)) { + info->ignore_status_mask |= UART_LSR_BI; + info->read_status_mask |= UART_LSR_BI; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(tty)) { + info->ignore_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + info->read_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + } + } + if (info->board->chip_flag) { + mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); + mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); + if (I_IXON(tty)) { + mxser_enable_must_rx_software_flow_control( + info->ioaddr); + } else { + mxser_disable_must_rx_software_flow_control( + info->ioaddr); + } + if (I_IXOFF(tty)) { + mxser_enable_must_tx_software_flow_control( + info->ioaddr); + } else { + mxser_disable_must_tx_software_flow_control( + info->ioaddr); + } + } + + + outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ + outb(cval, info->ioaddr + UART_LCR); + + return ret; +} + +static void mxser_check_modem_status(struct tty_struct *tty, + struct mxser_port *port, int status) +{ + /* update input line counters */ + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) + port->icount.dcd++; + if (status & UART_MSR_DCTS) + port->icount.cts++; + port->mon_data.modem_status = status; + wake_up_interruptible(&port->port.delta_msr_wait); + + if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { + if (status & UART_MSR_DCD) + wake_up_interruptible(&port->port.open_wait); + } + + if (port->port.flags & ASYNC_CTS_FLOW) { + if (tty->hw_stopped) { + if (status & UART_MSR_CTS) { + tty->hw_stopped = 0; + + if ((port->type != PORT_16550A) && + (!port->board->chip_flag)) { + outb(port->IER & ~UART_IER_THRI, + port->ioaddr + UART_IER); + port->IER |= UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + tty_wakeup(tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + tty->hw_stopped = 1; + if (port->type != PORT_16550A && + !port->board->chip_flag) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + } + } + } +} + +static int mxser_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long page; + unsigned long flags; + + page = __get_free_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + spin_lock_irqsave(&info->slock, flags); + + if (!info->ioaddr || !info->type) { + set_bit(TTY_IO_ERROR, &tty->flags); + free_page(page); + spin_unlock_irqrestore(&info->slock, flags); + return 0; + } + info->port.xmit_buf = (unsigned char *) page; + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in mxser_change_speed()) + */ + if (info->board->chip_flag) + outb((UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); + else + outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); + + /* + * At this point there's no way the LSR could still be 0xFF; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (inb(info->ioaddr + UART_LSR) == 0xff) { + spin_unlock_irqrestore(&info->slock, flags); + if (capable(CAP_SYS_ADMIN)) { + set_bit(TTY_IO_ERROR, &tty->flags); + return 0; + } else + return -ENODEV; + } + + /* + * Clear the interrupt registers. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); + + /* + * Now, initialize the UART + */ + outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ + info->MCR = UART_MCR_DTR | UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + + /* + * Finally, enable interrupts + */ + info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + + if (info->board->chip_flag) + info->IER |= MOXA_MUST_IER_EGDAI; + outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ + + /* + * And clear the interrupt registers again for luck. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); + + clear_bit(TTY_IO_ERROR, &tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + mxser_change_speed(tty, NULL); + spin_unlock_irqrestore(&info->slock, flags); + + return 0; +} + +/* + * This routine will shutdown a serial port + */ +static void mxser_shutdown_port(struct tty_port *port) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up + */ + wake_up_interruptible(&info->port.delta_msr_wait); + + /* + * Free the xmit buffer, if necessary + */ + if (info->port.xmit_buf) { + free_page((unsigned long) info->port.xmit_buf); + info->port.xmit_buf = NULL; + } + + info->IER = 0; + outb(0x00, info->ioaddr + UART_IER); + + /* clear Rx/Tx FIFO's */ + if (info->board->chip_flag) + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE, + info->ioaddr + UART_FCR); + else + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + info->ioaddr + UART_FCR); + + /* read data port to reset things */ + (void) inb(info->ioaddr + UART_RX); + + + if (info->board->chip_flag) + SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); + + spin_unlock_irqrestore(&info->slock, flags); +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int mxser_open(struct tty_struct *tty, struct file *filp) +{ + struct mxser_port *info; + int line; + + line = tty->index; + if (line == MXSER_PORTS) + return 0; + if (line < 0 || line > MXSER_PORTS) + return -ENODEV; + info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; + if (!info->ioaddr) + return -ENODEV; + + tty->driver_data = info; + return tty_port_open(&info->port, tty, filp); +} + +static void mxser_flush_buffer(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + char fcr; + unsigned long flags; + + + spin_lock_irqsave(&info->slock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + fcr = inb(info->ioaddr + UART_FCR); + outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); + outb(fcr, info->ioaddr + UART_FCR); + + spin_unlock_irqrestore(&info->slock, flags); + + tty_wakeup(tty); +} + + +static void mxser_close_port(struct tty_port *port) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long timeout; + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->IER &= ~UART_IER_RLSI; + if (info->board->chip_flag) + info->IER &= ~MOXA_MUST_RECV_ISR; + + outb(info->IER, info->ioaddr + UART_IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { + schedule_timeout_interruptible(5); + if (time_after(jiffies, timeout)) + break; + } +} + +/* + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + */ +static void mxser_close(struct tty_struct *tty, struct file *filp) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + + if (tty->index == MXSER_PORTS || info == NULL) + return; + if (tty_port_close_start(port, tty, filp) == 0) + return; + mutex_lock(&port->mutex); + mxser_close_port(port); + mxser_flush_buffer(tty); + mxser_shutdown_port(port); + clear_bit(ASYNCB_INITIALIZED, &port->flags); + mutex_unlock(&port->mutex); + /* Right now the tty_port set is done outside of the close_end helper + as we don't yet have everyone using refcounts */ + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); +} + +static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + int c, total = 0; + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (!info->port.xmit_buf) + return 0; + + while (1) { + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) + break; + + memcpy(info->port.xmit_buf + info->xmit_head, buf, c); + spin_lock_irqsave(&info->slock, flags); + info->xmit_head = (info->xmit_head + c) & + (SERIAL_XMIT_SIZE - 1); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->slock, flags); + + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped) { + if (!tty->hw_stopped || + (info->type == PORT_16550A) || + (info->board->chip_flag)) { + spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + spin_unlock_irqrestore(&info->slock, flags); + } + } + return total; +} + +static int mxser_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (!info->port.xmit_buf) + return 0; + + if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) + return 0; + + spin_lock_irqsave(&info->slock, flags); + info->port.xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE - 1; + info->xmit_cnt++; + spin_unlock_irqrestore(&info->slock, flags); + if (!tty->stopped) { + if (!tty->hw_stopped || + (info->type == PORT_16550A) || + info->board->chip_flag) { + spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + spin_unlock_irqrestore(&info->slock, flags); + } + } + return 1; +} + + +static void mxser_flush_chars(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf || + (tty->hw_stopped && info->type != PORT_16550A && + !info->board->chip_flag)) + return; + + spin_lock_irqsave(&info->slock, flags); + + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + + spin_unlock_irqrestore(&info->slock, flags); +} + +static int mxser_write_room(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + int ret; + + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + return ret < 0 ? 0 : ret; +} + +static int mxser_chars_in_buffer(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + return info->xmit_cnt; +} + +/* + * ------------------------------------------------------------ + * friends of mxser_ioctl() + * ------------------------------------------------------------ + */ +static int mxser_get_serial_info(struct tty_struct *tty, + struct serial_struct __user *retinfo) +{ + struct mxser_port *info = tty->driver_data; + struct serial_struct tmp = { + .type = info->type, + .line = tty->index, + .port = info->ioaddr, + .irq = info->board->irq, + .flags = info->port.flags, + .baud_base = info->baud_base, + .close_delay = info->port.close_delay, + .closing_wait = info->port.closing_wait, + .custom_divisor = info->custom_divisor, + .hub6 = 0 + }; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int mxser_set_serial_info(struct tty_struct *tty, + struct serial_struct __user *new_info) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + struct serial_struct new_serial; + speed_t baud; + unsigned long sl_flags; + unsigned int flags; + int retval = 0; + + if (!new_info || !info->ioaddr) + return -ENODEV; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + if (new_serial.irq != info->board->irq || + new_serial.port != info->ioaddr) + return -EINVAL; + + flags = port->flags & ASYNC_SPD_MASK; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.close_delay != info->port.close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + } else { + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + port->flags = ((port->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + port->close_delay = new_serial.close_delay * HZ / 100; + port->closing_wait = new_serial.closing_wait * HZ / 100; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + (new_serial.baud_base != info->baud_base || + new_serial.custom_divisor != + info->custom_divisor)) { + if (new_serial.custom_divisor == 0) + return -EINVAL; + baud = new_serial.baud_base / new_serial.custom_divisor; + tty_encode_baud_rate(tty, baud, baud); + } + } + + info->type = new_serial.type; + + process_txrx_fifo(info); + + if (test_bit(ASYNCB_INITIALIZED, &port->flags)) { + if (flags != (port->flags & ASYNC_SPD_MASK)) { + spin_lock_irqsave(&info->slock, sl_flags); + mxser_change_speed(tty, NULL); + spin_unlock_irqrestore(&info->slock, sl_flags); + } + } else { + retval = mxser_activate(port, tty); + if (retval == 0) + set_bit(ASYNCB_INITIALIZED, &port->flags); + } + return retval; +} + +/* + * mxser_get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int mxser_get_lsr_info(struct mxser_port *info, + unsigned int __user *value) +{ + unsigned char status; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_LSR); + spin_unlock_irqrestore(&info->slock, flags); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result, value); +} + +static int mxser_tiocmget(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned char control, status; + unsigned long flags; + + + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + control = info->MCR; + + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_MSR); + if (status & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, info, status); + spin_unlock_irqrestore(&info->slock, flags); + return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | + ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | + ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | + ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | + ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | + ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +} + +static int mxser_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + spin_lock_irqsave(&info->slock, flags); + + if (set & TIOCM_RTS) + info->MCR |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->MCR |= UART_MCR_DTR; + + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; + + outb(info->MCR, info->ioaddr + UART_MCR); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +static int __init mxser_program_mode(int port) +{ + int id, i, j, n; + + outb(0, port); + outb(0, port); + outb(0, port); + (void)inb(port); + (void)inb(port); + outb(0, port); + (void)inb(port); + + id = inb(port + 1) & 0x1F; + if ((id != C168_ASIC_ID) && + (id != C104_ASIC_ID) && + (id != C102_ASIC_ID) && + (id != CI132_ASIC_ID) && + (id != CI134_ASIC_ID) && + (id != CI104J_ASIC_ID)) + return -1; + for (i = 0, j = 0; i < 4; i++) { + n = inb(port + 2); + if (n == 'M') { + j = 1; + } else if ((j == 1) && (n == 1)) { + j = 2; + break; + } else + j = 0; + } + if (j != 2) + id = -2; + return id; +} + +static void __init mxser_normal_mode(int port) +{ + int i, n; + + outb(0xA5, port + 1); + outb(0x80, port + 3); + outb(12, port + 0); /* 9600 bps */ + outb(0, port + 1); + outb(0x03, port + 3); /* 8 data bits */ + outb(0x13, port + 4); /* loop back mode */ + for (i = 0; i < 16; i++) { + n = inb(port + 5); + if ((n & 0x61) == 0x60) + break; + if ((n & 1) == 1) + (void)inb(port); + } + outb(0x00, port + 4); +} + +#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ +#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ +#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ +#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ +#define EN_CCMD 0x000 /* Chip's command register */ +#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ +#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ +#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ +#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ +#define EN0_DCFG 0x00E /* Data configuration reg WR */ +#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ +#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ +#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ +static int __init mxser_read_register(int port, unsigned short *regs) +{ + int i, k, value, id; + unsigned int j; + + id = mxser_program_mode(port); + if (id < 0) + return id; + for (i = 0; i < 14; i++) { + k = (i & 0x3F) | 0x180; + for (j = 0x100; j > 0; j >>= 1) { + outb(CHIP_CS, port); + if (k & j) { + outb(CHIP_CS | CHIP_DO, port); + outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ + } else { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ + } + } + (void)inb(port); + value = 0; + for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); + if (inb(port) & CHIP_DI) + value |= j; + } + regs[i] = value; + outb(0, port); + } + mxser_normal_mode(port); + return id; +} + +static int mxser_ioctl_special(unsigned int cmd, void __user *argp) +{ + struct mxser_port *ip; + struct tty_port *port; + struct tty_struct *tty; + int result, status; + unsigned int i, j; + int ret = 0; + + switch (cmd) { + case MOXA_GET_MAJOR: + if (printk_ratelimit()) + printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl " + "%x (GET_MAJOR), fix your userspace\n", + current->comm, cmd); + return put_user(ttymajor, (int __user *)argp); + + case MOXA_CHKPORTENABLE: + result = 0; + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) + if (mxser_boards[i].ports[j].ioaddr) + result |= (1 << i); + return put_user(result, (unsigned long __user *)argp); + case MOXA_GETDATACOUNT: + /* The receive side is locked by port->slock but it isn't + clear that an exact snapshot is worth copying here */ + if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) + ret = -EFAULT; + return ret; + case MOXA_GETMSTATUS: { + struct mxser_mstatus ms, __user *msu = argp; + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + memset(&ms, 0, sizeof(ms)); + + mutex_lock(&port->mutex); + if (!ip->ioaddr) + goto copy; + + tty = tty_port_tty_get(port); + + if (!tty || !tty->termios) + ms.cflag = ip->normal_termios.c_cflag; + else + ms.cflag = tty->termios->c_cflag; + tty_kref_put(tty); + spin_lock_irq(&ip->slock); + status = inb(ip->ioaddr + UART_MSR); + spin_unlock_irq(&ip->slock); + if (status & UART_MSR_DCD) + ms.dcd = 1; + if (status & UART_MSR_DSR) + ms.dsr = 1; + if (status & UART_MSR_CTS) + ms.cts = 1; + copy: + mutex_unlock(&port->mutex); + if (copy_to_user(msu, &ms, sizeof(ms))) + return -EFAULT; + msu++; + } + return 0; + } + case MOXA_ASPP_MON_EXT: { + struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */ + unsigned int cflag, iflag, p; + u8 opmode; + + me = kzalloc(sizeof(*me), GFP_KERNEL); + if (!me) + return -ENOMEM; + + for (i = 0, p = 0; i < MXSER_BOARDS; i++) { + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { + if (p >= ARRAY_SIZE(me->rx_cnt)) { + i = MXSER_BOARDS; + break; + } + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + + mutex_lock(&port->mutex); + if (!ip->ioaddr) { + mutex_unlock(&port->mutex); + continue; + } + + spin_lock_irq(&ip->slock); + status = mxser_get_msr(ip->ioaddr, 0, p); + + if (status & UART_MSR_TERI) + ip->icount.rng++; + if (status & UART_MSR_DDSR) + ip->icount.dsr++; + if (status & UART_MSR_DDCD) + ip->icount.dcd++; + if (status & UART_MSR_DCTS) + ip->icount.cts++; + + ip->mon_data.modem_status = status; + me->rx_cnt[p] = ip->mon_data.rxcnt; + me->tx_cnt[p] = ip->mon_data.txcnt; + me->up_rxcnt[p] = ip->mon_data.up_rxcnt; + me->up_txcnt[p] = ip->mon_data.up_txcnt; + me->modem_status[p] = + ip->mon_data.modem_status; + spin_unlock_irq(&ip->slock); + + tty = tty_port_tty_get(&ip->port); + + if (!tty || !tty->termios) { + cflag = ip->normal_termios.c_cflag; + iflag = ip->normal_termios.c_iflag; + me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); + } else { + cflag = tty->termios->c_cflag; + iflag = tty->termios->c_iflag; + me->baudrate[p] = tty_get_baud_rate(tty); + } + tty_kref_put(tty); + + me->databits[p] = cflag & CSIZE; + me->stopbits[p] = cflag & CSTOPB; + me->parity[p] = cflag & (PARENB | PARODD | + CMSPAR); + + if (cflag & CRTSCTS) + me->flowctrl[p] |= 0x03; + + if (iflag & (IXON | IXOFF)) + me->flowctrl[p] |= 0x0C; + + if (ip->type == PORT_16550A) + me->fifo[p] = 1; + + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); + opmode &= OP_MODE_MASK; + me->iftype[p] = opmode; + mutex_unlock(&port->mutex); + } + } + if (copy_to_user(argp, me, sizeof(*me))) + ret = -EFAULT; + kfree(me); + return ret; + } + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, + struct async_icount *cprev) +{ + struct async_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* atomic copy */ + spin_unlock_irqrestore(&info->slock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +static int mxser_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + struct async_icount cnow; + unsigned long flags; + void __user *argp = (void __user *)arg; + int retval; + + if (tty->index == MXSER_PORTS) + return mxser_ioctl_special(cmd, argp); + + if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { + int p; + unsigned long opmode; + static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; + int shiftbit; + unsigned char val, mask; + + p = tty->index % 4; + if (cmd == MOXA_SET_OP_MODE) { + if (get_user(opmode, (int __user *) argp)) + return -EFAULT; + if (opmode != RS232_MODE && + opmode != RS485_2WIRE_MODE && + opmode != RS422_MODE && + opmode != RS485_4WIRE_MODE) + return -EFAULT; + mask = ModeMask[p]; + shiftbit = p * 2; + spin_lock_irq(&info->slock); + val = inb(info->opmode_ioaddr); + val &= mask; + val |= (opmode << shiftbit); + outb(val, info->opmode_ioaddr); + spin_unlock_irq(&info->slock); + } else { + shiftbit = p * 2; + spin_lock_irq(&info->slock); + opmode = inb(info->opmode_ioaddr) >> shiftbit; + spin_unlock_irq(&info->slock); + opmode &= OP_MODE_MASK; + if (put_user(opmode, (int __user *)argp)) + return -EFAULT; + } + return 0; + } + + if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && + test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + switch (cmd) { + case TIOCGSERIAL: + mutex_lock(&port->mutex); + retval = mxser_get_serial_info(tty, argp); + mutex_unlock(&port->mutex); + return retval; + case TIOCSSERIAL: + mutex_lock(&port->mutex); + retval = mxser_set_serial_info(tty, argp); + mutex_unlock(&port->mutex); + return retval; + case TIOCSERGETLSR: /* Get line status register */ + return mxser_get_lsr_info(info, argp); + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* note the counters on entry */ + spin_unlock_irqrestore(&info->slock, flags); + + return wait_event_interruptible(info->port.delta_msr_wait, + mxser_cflags_changed(info, arg, &cnow)); + case MOXA_HighSpeedOn: + return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); + case MOXA_SDS_RSTICOUNTER: + spin_lock_irq(&info->slock); + info->mon_data.rxcnt = 0; + info->mon_data.txcnt = 0; + spin_unlock_irq(&info->slock); + return 0; + + case MOXA_ASPP_OQUEUE:{ + int len, lsr; + + len = mxser_chars_in_buffer(tty); + spin_lock_irq(&info->slock); + lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE; + spin_unlock_irq(&info->slock); + len += (lsr ? 0 : 1); + + return put_user(len, (int __user *)argp); + } + case MOXA_ASPP_MON: { + int mcr, status; + + spin_lock_irq(&info->slock); + status = mxser_get_msr(info->ioaddr, 1, tty->index); + mxser_check_modem_status(tty, info, status); + + mcr = inb(info->ioaddr + UART_MCR); + spin_unlock_irq(&info->slock); + + if (mcr & MOXA_MUST_MCR_XON_FLAG) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; + + if (mcr & MOXA_MUST_MCR_TX_XON) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; + + if (tty->hw_stopped) + info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; + else + info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; + + if (copy_to_user(argp, &info->mon_data, + sizeof(struct mxser_mon))) + return -EFAULT; + + return 0; + } + case MOXA_ASPP_LSTATUS: { + if (put_user(info->err_shadow, (unsigned char __user *)argp)) + return -EFAULT; + + info->err_shadow = 0; + return 0; + } + case MOXA_SET_BAUD_METHOD: { + int method; + + if (get_user(method, (int __user *)argp)) + return -EFAULT; + mxser_set_baud_method[tty->index] = method; + return put_user(method, (int __user *)argp); + } + default: + return -ENOIOCTLCMD; + } + return 0; +} + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + +static int mxser_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct mxser_port *info = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->slock, flags); + + icount->frame = cnow.frame; + icount->brk = cnow.brk; + icount->overrun = cnow.overrun; + icount->buf_overrun = cnow.buf_overrun; + icount->parity = cnow.parity; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + return 0; +} + +static void mxser_stoprx(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + info->ldisc_stop_rx = 1; + if (I_IXOFF(tty)) { + if (info->board->chip_flag) { + info->IER &= ~MOXA_MUST_RECV_ISR; + outb(info->IER, info->ioaddr + UART_IER); + } else { + info->x_char = STOP_CHAR(tty); + outb(0, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + } + + if (tty->termios->c_cflag & CRTSCTS) { + info->MCR &= ~UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + } +} + +/* + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + */ +static void mxser_throttle(struct tty_struct *tty) +{ + mxser_stoprx(tty); +} + +static void mxser_unthrottle(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + /* startrx */ + info->ldisc_stop_rx = 0; + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else { + if (info->board->chip_flag) { + info->IER |= MOXA_MUST_RECV_ISR; + outb(info->IER, info->ioaddr + UART_IER); + } else { + info->x_char = START_CHAR(tty); + outb(0, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + } + } + + if (tty->termios->c_cflag & CRTSCTS) { + info->MCR |= UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + } +} + +/* + * mxser_stop() and mxser_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + */ +static void mxser_stop(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (info->IER & UART_IER_THRI) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); +} + +static void mxser_start(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (info->xmit_cnt && info->port.xmit_buf) { + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); +} + +static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + mxser_change_speed(tty, old_termios); + spin_unlock_irqrestore(&info->slock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + mxser_start(tty); + } + + /* Handle sw stopped */ + if ((old_termios->c_iflag & IXON) && + !(tty->termios->c_iflag & IXON)) { + tty->stopped = 0; + + if (info->board->chip_flag) { + spin_lock_irqsave(&info->slock, flags); + mxser_disable_must_rx_software_flow_control( + info->ioaddr); + spin_unlock_irqrestore(&info->slock, flags); + } + + mxser_start(tty); + } +} + +/* + * mxser_wait_until_sent() --- wait until the transmitter is empty + */ +static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct mxser_port *info = tty->driver_data; + unsigned long orig_jiffies, char_time; + unsigned long flags; + int lsr; + + if (info->type == PORT_UNKNOWN) + return; + + if (info->xmit_fifo_size == 0) + return; /* Just in case.... */ + + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2 * info->timeout) + timeout = 2 * info->timeout; +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", + timeout, char_time); + printk("jiff=%lu...", jiffies); +#endif + spin_lock_irqsave(&info->slock, flags); + while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...", lsr, jiffies); +#endif + spin_unlock_irqrestore(&info->slock, flags); + schedule_timeout_interruptible(char_time); + spin_lock_irqsave(&info->slock, flags); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + spin_unlock_irqrestore(&info->slock, flags); + set_current_state(TASK_RUNNING); + +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); +#endif +} + +/* + * This routine is called by tty_hangup() when a hangup is signaled. + */ +static void mxser_hangup(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + mxser_flush_buffer(tty); + tty_port_hangup(&info->port); +} + +/* + * mxser_rs_break() --- routine which turns the break handling on or off + */ +static int mxser_rs_break(struct tty_struct *tty, int break_state) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (break_state == -1) + outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, + info->ioaddr + UART_LCR); + else + outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, + info->ioaddr + UART_LCR); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +static void mxser_receive_chars(struct tty_struct *tty, + struct mxser_port *port, int *status) +{ + unsigned char ch, gdl; + int ignored = 0; + int cnt = 0; + int recv_room; + int max = 256; + + recv_room = tty->receive_room; + if (recv_room == 0 && !port->ldisc_stop_rx) + mxser_stoprx(tty); + if (port->board->chip_flag != MOXA_OTHER_UART) { + + if (*status & UART_LSR_SPECIAL) + goto intr_old; + if (port->board->chip_flag == MOXA_MUST_MU860_HWID && + (*status & MOXA_MUST_LSR_RERR)) + goto intr_old; + if (*status & MOXA_MUST_LSR_RERR) + goto intr_old; + + gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); + + if (port->board->chip_flag == MOXA_MUST_MU150_HWID) + gdl &= MOXA_MUST_GDL_MASK; + if (gdl >= recv_room) { + if (!port->ldisc_stop_rx) + mxser_stoprx(tty); + } + while (gdl--) { + ch = inb(port->ioaddr + UART_RX); + tty_insert_flip_char(tty, ch, 0); + cnt++; + } + goto end_intr; + } +intr_old: + + do { + if (max-- < 0) + break; + + ch = inb(port->ioaddr + UART_RX); + if (port->board->chip_flag && (*status & UART_LSR_OE)) + outb(0x23, port->ioaddr + UART_FCR); + *status &= port->read_status_mask; + if (*status & port->ignore_status_mask) { + if (++ignored > 100) + break; + } else { + char flag = 0; + if (*status & UART_LSR_SPECIAL) { + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + port->icount.brk++; + + if (port->port.flags & ASYNC_SAK) + do_SAK(tty); + } else if (*status & UART_LSR_PE) { + flag = TTY_PARITY; + port->icount.parity++; + } else if (*status & UART_LSR_FE) { + flag = TTY_FRAME; + port->icount.frame++; + } else if (*status & UART_LSR_OE) { + flag = TTY_OVERRUN; + port->icount.overrun++; + } else + flag = TTY_BREAK; + } + tty_insert_flip_char(tty, ch, flag); + cnt++; + if (cnt >= recv_room) { + if (!port->ldisc_stop_rx) + mxser_stoprx(tty); + break; + } + + } + + if (port->board->chip_flag) + break; + + *status = inb(port->ioaddr + UART_LSR); + } while (*status & UART_LSR_DR); + +end_intr: + mxvar_log.rxcnt[tty->index] += cnt; + port->mon_data.rxcnt += cnt; + port->mon_data.up_rxcnt += cnt; + + /* + * We are called from an interrupt context with &port->slock + * being held. Drop it temporarily in order to prevent + * recursive locking. + */ + spin_unlock(&port->slock); + tty_flip_buffer_push(tty); + spin_lock(&port->slock); +} + +static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) +{ + int count, cnt; + + if (port->x_char) { + outb(port->x_char, port->ioaddr + UART_TX); + port->x_char = 0; + mxvar_log.txcnt[tty->index]++; + port->mon_data.txcnt++; + port->mon_data.up_txcnt++; + port->icount.tx++; + return; + } + + if (port->port.xmit_buf == NULL) + return; + + if (port->xmit_cnt <= 0 || tty->stopped || + (tty->hw_stopped && + (port->type != PORT_16550A) && + (!port->board->chip_flag))) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); + return; + } + + cnt = port->xmit_cnt; + count = port->xmit_fifo_size; + do { + outb(port->port.xmit_buf[port->xmit_tail++], + port->ioaddr + UART_TX); + port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); + if (--port->xmit_cnt <= 0) + break; + } while (--count > 0); + mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt); + + port->mon_data.txcnt += (cnt - port->xmit_cnt); + port->mon_data.up_txcnt += (cnt - port->xmit_cnt); + port->icount.tx += (cnt - port->xmit_cnt); + + if (port->xmit_cnt < WAKEUP_CHARS) + tty_wakeup(tty); + + if (port->xmit_cnt <= 0) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); + } +} + +/* + * This is the serial driver's generic interrupt routine + */ +static irqreturn_t mxser_interrupt(int irq, void *dev_id) +{ + int status, iir, i; + struct mxser_board *brd = NULL; + struct mxser_port *port; + int max, irqbits, bits, msr; + unsigned int int_cnt, pass_counter = 0; + int handled = IRQ_NONE; + struct tty_struct *tty; + + for (i = 0; i < MXSER_BOARDS; i++) + if (dev_id == &mxser_boards[i]) { + brd = dev_id; + break; + } + + if (i == MXSER_BOARDS) + goto irq_stop; + if (brd == NULL) + goto irq_stop; + max = brd->info->nports; + while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { + irqbits = inb(brd->vector) & brd->vector_mask; + if (irqbits == brd->vector_mask) + break; + + handled = IRQ_HANDLED; + for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { + if (irqbits == brd->vector_mask) + break; + if (bits & irqbits) + continue; + port = &brd->ports[i]; + + int_cnt = 0; + spin_lock(&port->slock); + do { + iir = inb(port->ioaddr + UART_IIR); + if (iir & UART_IIR_NO_INT) + break; + iir &= MOXA_MUST_IIR_MASK; + tty = tty_port_tty_get(&port->port); + if (!tty || + (port->port.flags & ASYNC_CLOSING) || + !(port->port.flags & + ASYNC_INITIALIZED)) { + status = inb(port->ioaddr + UART_LSR); + outb(0x27, port->ioaddr + UART_FCR); + inb(port->ioaddr + UART_MSR); + tty_kref_put(tty); + break; + } + + status = inb(port->ioaddr + UART_LSR); + + if (status & UART_LSR_PE) + port->err_shadow |= NPPI_NOTIFY_PARITY; + if (status & UART_LSR_FE) + port->err_shadow |= NPPI_NOTIFY_FRAMING; + if (status & UART_LSR_OE) + port->err_shadow |= + NPPI_NOTIFY_HW_OVERRUN; + if (status & UART_LSR_BI) + port->err_shadow |= NPPI_NOTIFY_BREAK; + + if (port->board->chip_flag) { + if (iir == MOXA_MUST_IIR_GDA || + iir == MOXA_MUST_IIR_RDA || + iir == MOXA_MUST_IIR_RTO || + iir == MOXA_MUST_IIR_LSR) + mxser_receive_chars(tty, port, + &status); + + } else { + status &= port->read_status_mask; + if (status & UART_LSR_DR) + mxser_receive_chars(tty, port, + &status); + } + msr = inb(port->ioaddr + UART_MSR); + if (msr & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, port, msr); + + if (port->board->chip_flag) { + if (iir == 0x02 && (status & + UART_LSR_THRE)) + mxser_transmit_chars(tty, port); + } else { + if (status & UART_LSR_THRE) + mxser_transmit_chars(tty, port); + } + tty_kref_put(tty); + } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); + spin_unlock(&port->slock); + } + } + +irq_stop: + return handled; +} + +static const struct tty_operations mxser_ops = { + .open = mxser_open, + .close = mxser_close, + .write = mxser_write, + .put_char = mxser_put_char, + .flush_chars = mxser_flush_chars, + .write_room = mxser_write_room, + .chars_in_buffer = mxser_chars_in_buffer, + .flush_buffer = mxser_flush_buffer, + .ioctl = mxser_ioctl, + .throttle = mxser_throttle, + .unthrottle = mxser_unthrottle, + .set_termios = mxser_set_termios, + .stop = mxser_stop, + .start = mxser_start, + .hangup = mxser_hangup, + .break_ctl = mxser_rs_break, + .wait_until_sent = mxser_wait_until_sent, + .tiocmget = mxser_tiocmget, + .tiocmset = mxser_tiocmset, + .get_icount = mxser_get_icount, +}; + +struct tty_port_operations mxser_port_ops = { + .carrier_raised = mxser_carrier_raised, + .dtr_rts = mxser_dtr_rts, + .activate = mxser_activate, + .shutdown = mxser_shutdown_port, +}; + +/* + * The MOXA Smartio/Industio serial driver boot-time initialization code! + */ + +static void mxser_release_ISA_res(struct mxser_board *brd) +{ + free_irq(brd->irq, brd); + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + release_region(brd->vector, 1); +} + +static int __devinit mxser_initbrd(struct mxser_board *brd, + struct pci_dev *pdev) +{ + struct mxser_port *info; + unsigned int i; + int retval; + + printk(KERN_INFO "mxser: max. baud rate = %d bps\n", + brd->ports[0].max_baud); + + for (i = 0; i < brd->info->nports; i++) { + info = &brd->ports[i]; + tty_port_init(&info->port); + info->port.ops = &mxser_port_ops; + info->board = brd; + info->stop_rx = 0; + info->ldisc_stop_rx = 0; + + /* Enhance mode enabled here */ + if (brd->chip_flag != MOXA_OTHER_UART) + mxser_enable_must_enchance_mode(info->ioaddr); + + info->port.flags = ASYNC_SHARE_IRQ; + info->type = brd->uart_type; + + process_txrx_fifo(info); + + info->custom_divisor = info->baud_base * 16; + info->port.close_delay = 5 * HZ / 10; + info->port.closing_wait = 30 * HZ; + info->normal_termios = mxvar_sdriver->init_termios; + memset(&info->mon_data, 0, sizeof(struct mxser_mon)); + info->err_shadow = 0; + spin_lock_init(&info->slock); + + /* before set INT ISR, disable all int */ + outb(inb(info->ioaddr + UART_IER) & 0xf0, + info->ioaddr + UART_IER); + } + + retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", + brd); + if (retval) + printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " + "conflict with another device.\n", + brd->info->name, brd->irq); + + return retval; +} + +static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) +{ + int id, i, bits; + unsigned short regs[16], irq; + unsigned char scratch, scratch2; + + brd->chip_flag = MOXA_OTHER_UART; + + id = mxser_read_register(cap, regs); + switch (id) { + case C168_ASIC_ID: + brd->info = &mxser_cards[0]; + break; + case C104_ASIC_ID: + brd->info = &mxser_cards[1]; + break; + case CI104J_ASIC_ID: + brd->info = &mxser_cards[2]; + break; + case C102_ASIC_ID: + brd->info = &mxser_cards[5]; + break; + case CI132_ASIC_ID: + brd->info = &mxser_cards[6]; + break; + case CI134_ASIC_ID: + brd->info = &mxser_cards[7]; + break; + default: + return 0; + } + + irq = 0; + /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) + Flag-hack checks if configuration should be read as 2-port here. */ + if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + if (irq != (regs[9] & 0xFF00)) + goto err_irqconflict; + } else if (brd->info->nports == 4) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + irq = irq | (irq >> 8); + if (irq != regs[9]) + goto err_irqconflict; + } else if (brd->info->nports == 8) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + irq = irq | (irq >> 8); + if ((irq != regs[9]) || (irq != regs[10])) + goto err_irqconflict; + } + + if (!irq) { + printk(KERN_ERR "mxser: interrupt number unset\n"); + return -EIO; + } + brd->irq = ((int)(irq & 0xF000) >> 12); + for (i = 0; i < 8; i++) + brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; + if ((regs[12] & 0x80) == 0) { + printk(KERN_ERR "mxser: invalid interrupt vector\n"); + return -EIO; + } + brd->vector = (int)regs[11]; /* interrupt vector */ + if (id == 1) + brd->vector_mask = 0x00FF; + else + brd->vector_mask = 0x000F; + for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { + if (regs[12] & bits) { + brd->ports[i].baud_base = 921600; + brd->ports[i].max_baud = 921600; + } else { + brd->ports[i].baud_base = 115200; + brd->ports[i].max_baud = 115200; + } + } + scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); + outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); + outb(0, cap + UART_EFR); /* EFR is the same as FCR */ + outb(scratch2, cap + UART_LCR); + outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); + scratch = inb(cap + UART_IIR); + + if (scratch & 0xC0) + brd->uart_type = PORT_16550A; + else + brd->uart_type = PORT_16450; + if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, + "mxser(IO)")) { + printk(KERN_ERR "mxser: can't request ports I/O region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; + } + if (!request_region(brd->vector, 1, "mxser(vector)")) { + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + printk(KERN_ERR "mxser: can't request interrupt vector region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; + } + return brd->info->nports; + +err_irqconflict: + printk(KERN_ERR "mxser: invalid interrupt number\n"); + return -EIO; +} + +static int __devinit mxser_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ +#ifdef CONFIG_PCI + struct mxser_board *brd; + unsigned int i, j; + unsigned long ioaddress; + int retval = -EINVAL; + + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info == NULL) + break; + + if (i >= MXSER_BOARDS) { + dev_err(&pdev->dev, "too many boards found (maximum %d), board " + "not configured\n", MXSER_BOARDS); + goto err; + } + + brd = &mxser_boards[i]; + brd->idx = i * MXSER_PORTS_PER_BOARD; + dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n", + mxser_cards[ent->driver_data].name, + pdev->bus->number, PCI_SLOT(pdev->devfn)); + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "PCI enable failed\n"); + goto err; + } + + /* io address */ + ioaddress = pci_resource_start(pdev, 2); + retval = pci_request_region(pdev, 2, "mxser(IO)"); + if (retval) + goto err_dis; + + brd->info = &mxser_cards[ent->driver_data]; + for (i = 0; i < brd->info->nports; i++) + brd->ports[i].ioaddr = ioaddress + 8 * i; + + /* vector */ + ioaddress = pci_resource_start(pdev, 3); + retval = pci_request_region(pdev, 3, "mxser(vector)"); + if (retval) + goto err_zero; + brd->vector = ioaddress; + + /* irq */ + brd->irq = pdev->irq; + + brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); + brd->uart_type = PORT_16550A; + brd->vector_mask = 0; + + for (i = 0; i < brd->info->nports; i++) { + for (j = 0; j < UART_INFO_NUM; j++) { + if (Gpci_uart_info[j].type == brd->chip_flag) { + brd->ports[i].max_baud = + Gpci_uart_info[j].max_baud; + + /* exception....CP-102 */ + if (brd->info->flags & MXSER_HIGHBAUD) + brd->ports[i].max_baud = 921600; + break; + } + } + } + + if (brd->chip_flag == MOXA_MUST_MU860_HWID) { + for (i = 0; i < brd->info->nports; i++) { + if (i < 4) + brd->ports[i].opmode_ioaddr = ioaddress + 4; + else + brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; + } + outb(0, ioaddress + 4); /* default set to RS232 mode */ + outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ + } + + for (i = 0; i < brd->info->nports; i++) { + brd->vector_mask |= (1 << i); + brd->ports[i].baud_base = 921600; + } + + /* mxser_initbrd will hook ISR. */ + retval = mxser_initbrd(brd, pdev); + if (retval) + goto err_rel3; + + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev); + + pci_set_drvdata(pdev, brd); + + return 0; +err_rel3: + pci_release_region(pdev, 3); +err_zero: + brd->info = NULL; + pci_release_region(pdev, 2); +err_dis: + pci_disable_device(pdev); +err: + return retval; +#else + return -ENODEV; +#endif +} + +static void __devexit mxser_remove(struct pci_dev *pdev) +{ +#ifdef CONFIG_PCI + struct mxser_board *brd = pci_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < brd->info->nports; i++) + tty_unregister_device(mxvar_sdriver, brd->idx + i); + + free_irq(pdev->irq, brd); + pci_release_region(pdev, 2); + pci_release_region(pdev, 3); + pci_disable_device(pdev); + brd->info = NULL; +#endif +} + +static struct pci_driver mxser_driver = { + .name = "mxser", + .id_table = mxser_pcibrds, + .probe = mxser_probe, + .remove = __devexit_p(mxser_remove) +}; + +static int __init mxser_module_init(void) +{ + struct mxser_board *brd; + unsigned int b, i, m; + int retval; + + mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); + if (!mxvar_sdriver) + return -ENOMEM; + + printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", + MXSER_VERSION); + + /* Initialize the tty_driver structure */ + mxvar_sdriver->owner = THIS_MODULE; + mxvar_sdriver->magic = TTY_DRIVER_MAGIC; + mxvar_sdriver->name = "ttyMI"; + mxvar_sdriver->major = ttymajor; + mxvar_sdriver->minor_start = 0; + mxvar_sdriver->num = MXSER_PORTS + 1; + mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; + mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; + mxvar_sdriver->init_termios = tty_std_termios; + mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(mxvar_sdriver, &mxser_ops); + + retval = tty_register_driver(mxvar_sdriver); + if (retval) { + printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " + "tty driver !\n"); + goto err_put; + } + + /* Start finding ISA boards here */ + for (m = 0, b = 0; b < MXSER_BOARDS; b++) { + if (!ioaddr[b]) + continue; + + brd = &mxser_boards[m]; + retval = mxser_get_ISA_conf(ioaddr[b], brd); + if (retval <= 0) { + brd->info = NULL; + continue; + } + + printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n", + brd->info->name, ioaddr[b]); + + /* mxser_initbrd will hook ISR. */ + if (mxser_initbrd(brd, NULL) < 0) { + brd->info = NULL; + continue; + } + + brd->idx = m * MXSER_PORTS_PER_BOARD; + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, NULL); + + m++; + } + + retval = pci_register_driver(&mxser_driver); + if (retval) { + printk(KERN_ERR "mxser: can't register pci driver\n"); + if (!m) { + retval = -ENODEV; + goto err_unr; + } /* else: we have some ISA cards under control */ + } + + return 0; +err_unr: + tty_unregister_driver(mxvar_sdriver); +err_put: + put_tty_driver(mxvar_sdriver); + return retval; +} + +static void __exit mxser_module_exit(void) +{ + unsigned int i, j; + + pci_unregister_driver(&mxser_driver); + + for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ + if (mxser_boards[i].info != NULL) + for (j = 0; j < mxser_boards[i].info->nports; j++) + tty_unregister_device(mxvar_sdriver, + mxser_boards[i].idx + j); + tty_unregister_driver(mxvar_sdriver); + put_tty_driver(mxvar_sdriver); + + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info != NULL) + mxser_release_ISA_res(&mxser_boards[i]); +} + +module_init(mxser_module_init); +module_exit(mxser_module_exit); diff --git a/drivers/tty/mxser.h b/drivers/tty/mxser.h new file mode 100644 index 000000000000..41878a69203d --- /dev/null +++ b/drivers/tty/mxser.h @@ -0,0 +1,150 @@ +#ifndef _MXSER_H +#define _MXSER_H + +/* + * Semi-public control interfaces + */ + +/* + * MOXA ioctls + */ + +#define MOXA 0x400 +#define MOXA_GETDATACOUNT (MOXA + 23) +#define MOXA_DIAGNOSE (MOXA + 50) +#define MOXA_CHKPORTENABLE (MOXA + 60) +#define MOXA_HighSpeedOn (MOXA + 61) +#define MOXA_GET_MAJOR (MOXA + 63) +#define MOXA_GETMSTATUS (MOXA + 65) +#define MOXA_SET_OP_MODE (MOXA + 66) +#define MOXA_GET_OP_MODE (MOXA + 67) + +#define RS232_MODE 0 +#define RS485_2WIRE_MODE 1 +#define RS422_MODE 2 +#define RS485_4WIRE_MODE 3 +#define OP_MODE_MASK 3 + +#define MOXA_SDS_RSTICOUNTER (MOXA + 69) +#define MOXA_ASPP_OQUEUE (MOXA + 70) +#define MOXA_ASPP_MON (MOXA + 73) +#define MOXA_ASPP_LSTATUS (MOXA + 74) +#define MOXA_ASPP_MON_EXT (MOXA + 75) +#define MOXA_SET_BAUD_METHOD (MOXA + 76) + +/* --------------------------------------------------- */ + +#define NPPI_NOTIFY_PARITY 0x01 +#define NPPI_NOTIFY_FRAMING 0x02 +#define NPPI_NOTIFY_HW_OVERRUN 0x04 +#define NPPI_NOTIFY_SW_OVERRUN 0x08 +#define NPPI_NOTIFY_BREAK 0x10 + +#define NPPI_NOTIFY_CTSHOLD 0x01 /* Tx hold by CTS low */ +#define NPPI_NOTIFY_DSRHOLD 0x02 /* Tx hold by DSR low */ +#define NPPI_NOTIFY_XOFFHOLD 0x08 /* Tx hold by Xoff received */ +#define NPPI_NOTIFY_XOFFXENT 0x10 /* Xoff Sent */ + +/* follow just for Moxa Must chip define. */ +/* */ +/* when LCR register (offset 0x03) write following value, */ +/* the Must chip will enter enchance mode. And write value */ +/* on EFR (offset 0x02) bit 6,7 to change bank. */ +#define MOXA_MUST_ENTER_ENCHANCE 0xBF + +/* when enhance mode enable, access on general bank register */ +#define MOXA_MUST_GDL_REGISTER 0x07 +#define MOXA_MUST_GDL_MASK 0x7F +#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 + +#define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ +/* enchance register bank select and enchance mode setting register */ +/* when LCR register equal to 0xBF */ +#define MOXA_MUST_EFR_REGISTER 0x02 +/* enchance mode enable */ +#define MOXA_MUST_EFR_EFRB_ENABLE 0x10 +/* enchance reister bank set 0, 1, 2 */ +#define MOXA_MUST_EFR_BANK0 0x00 +#define MOXA_MUST_EFR_BANK1 0x40 +#define MOXA_MUST_EFR_BANK2 0x80 +#define MOXA_MUST_EFR_BANK3 0xC0 +#define MOXA_MUST_EFR_BANK_MASK 0xC0 + +/* set XON1 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XON1_REGISTER 0x04 + +/* set XON2 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XON2_REGISTER 0x05 + +/* set XOFF1 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XOFF1_REGISTER 0x06 + +/* set XOFF2 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XOFF2_REGISTER 0x07 + +#define MOXA_MUST_RBRTL_REGISTER 0x04 +#define MOXA_MUST_RBRTH_REGISTER 0x05 +#define MOXA_MUST_RBRTI_REGISTER 0x06 +#define MOXA_MUST_THRTL_REGISTER 0x07 +#define MOXA_MUST_ENUM_REGISTER 0x04 +#define MOXA_MUST_HWID_REGISTER 0x05 +#define MOXA_MUST_ECR_REGISTER 0x06 +#define MOXA_MUST_CSR_REGISTER 0x07 + +/* good data mode enable */ +#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 +/* only good data put into RxFIFO */ +#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 + +/* enable CTS interrupt */ +#define MOXA_MUST_IER_ECTSI 0x80 +/* enable RTS interrupt */ +#define MOXA_MUST_IER_ERTSI 0x40 +/* enable Xon/Xoff interrupt */ +#define MOXA_MUST_IER_XINT 0x20 +/* enable GDA interrupt */ +#define MOXA_MUST_IER_EGDAI 0x10 + +#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) + +/* GDA interrupt pending */ +#define MOXA_MUST_IIR_GDA 0x1C +#define MOXA_MUST_IIR_RDA 0x04 +#define MOXA_MUST_IIR_RTO 0x0C +#define MOXA_MUST_IIR_LSR 0x06 + +/* recieved Xon/Xoff or specical interrupt pending */ +#define MOXA_MUST_IIR_XSC 0x10 + +/* RTS/CTS change state interrupt pending */ +#define MOXA_MUST_IIR_RTSCTS 0x20 +#define MOXA_MUST_IIR_MASK 0x3E + +#define MOXA_MUST_MCR_XON_FLAG 0x40 +#define MOXA_MUST_MCR_XON_ANY 0x80 +#define MOXA_MUST_MCR_TX_XON 0x08 + +/* software flow control on chip mask value */ +#define MOXA_MUST_EFR_SF_MASK 0x0F +/* send Xon1/Xoff1 */ +#define MOXA_MUST_EFR_SF_TX1 0x08 +/* send Xon2/Xoff2 */ +#define MOXA_MUST_EFR_SF_TX2 0x04 +/* send Xon1,Xon2/Xoff1,Xoff2 */ +#define MOXA_MUST_EFR_SF_TX12 0x0C +/* don't send Xon/Xoff */ +#define MOXA_MUST_EFR_SF_TX_NO 0x00 +/* Tx software flow control mask */ +#define MOXA_MUST_EFR_SF_TX_MASK 0x0C +/* don't receive Xon/Xoff */ +#define MOXA_MUST_EFR_SF_RX_NO 0x00 +/* receive Xon1/Xoff1 */ +#define MOXA_MUST_EFR_SF_RX1 0x02 +/* receive Xon2/Xoff2 */ +#define MOXA_MUST_EFR_SF_RX2 0x01 +/* receive Xon1,Xon2/Xoff1,Xoff2 */ +#define MOXA_MUST_EFR_SF_RX12 0x03 +/* Rx software flow control mask */ +#define MOXA_MUST_EFR_SF_RX_MASK 0x03 + +#endif diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c new file mode 100644 index 000000000000..513ba12064ea --- /dev/null +++ b/drivers/tty/nozomi.c @@ -0,0 +1,1993 @@ +/* + * nozomi.c -- HSDPA driver Broadband Wireless Data Card - Globe Trotter + * + * Written by: Ulf Jakobsson, + * Jan Åkerfeldt, + * Stefan Thomasson, + * + * Maintained by: Paul Hardwick (p.hardwick@option.com) + * + * Patches: + * Locking code changes for Vodafone by Sphere Systems Ltd, + * Andrew Bird (ajb@spheresystems.co.uk ) + * & Phil Sanderson + * + * Source has been ported from an implementation made by Filip Aben @ Option + * + * -------------------------------------------------------------------------- + * + * Copyright (c) 2005,2006 Option Wireless Sweden AB + * Copyright (c) 2006 Sphere Systems Ltd + * Copyright (c) 2006 Option Wireless n/v + * All rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * -------------------------------------------------------------------------- + */ + +/* Enable this to have a lot of debug printouts */ +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +#define VERSION_STRING DRIVER_DESC " 2.1d (build date: " \ + __DATE__ " " __TIME__ ")" + +/* Macros definitions */ + +/* Default debug printout level */ +#define NOZOMI_DEBUG_LEVEL 0x00 + +#define P_BUF_SIZE 128 +#define NFO(_err_flag_, args...) \ +do { \ + char tmp[P_BUF_SIZE]; \ + snprintf(tmp, sizeof(tmp), ##args); \ + printk(_err_flag_ "[%d] %s(): %s\n", __LINE__, \ + __func__, tmp); \ +} while (0) + +#define DBG1(args...) D_(0x01, ##args) +#define DBG2(args...) D_(0x02, ##args) +#define DBG3(args...) D_(0x04, ##args) +#define DBG4(args...) D_(0x08, ##args) +#define DBG5(args...) D_(0x10, ##args) +#define DBG6(args...) D_(0x20, ##args) +#define DBG7(args...) D_(0x40, ##args) +#define DBG8(args...) D_(0x80, ##args) + +#ifdef DEBUG +/* Do we need this settable at runtime? */ +static int debug = NOZOMI_DEBUG_LEVEL; + +#define D(lvl, args...) do \ + {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \ + while (0) +#define D_(lvl, args...) D(lvl, ##args) + +/* These printouts are always printed */ + +#else +static int debug; +#define D_(lvl, args...) +#endif + +/* TODO: rewrite to optimize macros... */ + +#define TMP_BUF_MAX 256 + +#define DUMP(buf__,len__) \ + do { \ + char tbuf[TMP_BUF_MAX] = {0};\ + if (len__ > 1) {\ + snprintf(tbuf, len__ > TMP_BUF_MAX ? TMP_BUF_MAX : len__, "%s", buf__);\ + if (tbuf[len__-2] == '\r') {\ + tbuf[len__-2] = 'r';\ + } \ + DBG1("SENDING: '%s' (%d+n)", tbuf, len__);\ + } else {\ + DBG1("SENDING: '%s' (%d)", tbuf, len__);\ + } \ +} while (0) + +/* Defines */ +#define NOZOMI_NAME "nozomi" +#define NOZOMI_NAME_TTY "nozomi_tty" +#define DRIVER_DESC "Nozomi driver" + +#define NTTY_TTY_MAXMINORS 256 +#define NTTY_FIFO_BUFFER_SIZE 8192 + +/* Must be power of 2 */ +#define FIFO_BUFFER_SIZE_UL 8192 + +/* Size of tmp send buffer to card */ +#define SEND_BUF_MAX 1024 +#define RECEIVE_BUF_MAX 4 + + +#define R_IIR 0x0000 /* Interrupt Identity Register */ +#define R_FCR 0x0000 /* Flow Control Register */ +#define R_IER 0x0004 /* Interrupt Enable Register */ + +#define CONFIG_MAGIC 0xEFEFFEFE +#define TOGGLE_VALID 0x0000 + +/* Definition of interrupt tokens */ +#define MDM_DL1 0x0001 +#define MDM_UL1 0x0002 +#define MDM_DL2 0x0004 +#define MDM_UL2 0x0008 +#define DIAG_DL1 0x0010 +#define DIAG_DL2 0x0020 +#define DIAG_UL 0x0040 +#define APP1_DL 0x0080 +#define APP1_UL 0x0100 +#define APP2_DL 0x0200 +#define APP2_UL 0x0400 +#define CTRL_DL 0x0800 +#define CTRL_UL 0x1000 +#define RESET 0x8000 + +#define MDM_DL (MDM_DL1 | MDM_DL2) +#define MDM_UL (MDM_UL1 | MDM_UL2) +#define DIAG_DL (DIAG_DL1 | DIAG_DL2) + +/* modem signal definition */ +#define CTRL_DSR 0x0001 +#define CTRL_DCD 0x0002 +#define CTRL_RI 0x0004 +#define CTRL_CTS 0x0008 + +#define CTRL_DTR 0x0001 +#define CTRL_RTS 0x0002 + +#define MAX_PORT 4 +#define NOZOMI_MAX_PORTS 5 +#define NOZOMI_MAX_CARDS (NTTY_TTY_MAXMINORS / MAX_PORT) + +/* Type definitions */ + +/* + * There are two types of nozomi cards, + * one with 2048 memory and with 8192 memory + */ +enum card_type { + F32_2 = 2048, /* 512 bytes downlink + uplink * 2 -> 2048 */ + F32_8 = 8192, /* 3072 bytes downl. + 1024 bytes uplink * 2 -> 8192 */ +}; + +/* Initialization states a card can be in */ +enum card_state { + NOZOMI_STATE_UKNOWN = 0, + NOZOMI_STATE_ENABLED = 1, /* pci device enabled */ + NOZOMI_STATE_ALLOCATED = 2, /* config setup done */ + NOZOMI_STATE_READY = 3, /* flowcontrols received */ +}; + +/* Two different toggle channels exist */ +enum channel_type { + CH_A = 0, + CH_B = 1, +}; + +/* Port definition for the card regarding flow control */ +enum ctrl_port_type { + CTRL_CMD = 0, + CTRL_MDM = 1, + CTRL_DIAG = 2, + CTRL_APP1 = 3, + CTRL_APP2 = 4, + CTRL_ERROR = -1, +}; + +/* Ports that the nozomi has */ +enum port_type { + PORT_MDM = 0, + PORT_DIAG = 1, + PORT_APP1 = 2, + PORT_APP2 = 3, + PORT_CTRL = 4, + PORT_ERROR = -1, +}; + +#ifdef __BIG_ENDIAN +/* Big endian */ + +struct toggles { + unsigned int enabled:5; /* + * Toggle fields are valid if enabled is 0, + * else A-channels must always be used. + */ + unsigned int diag_dl:1; + unsigned int mdm_dl:1; + unsigned int mdm_ul:1; +} __attribute__ ((packed)); + +/* Configuration table to read at startup of card */ +/* Is for now only needed during initialization phase */ +struct config_table { + u32 signature; + u16 product_information; + u16 version; + u8 pad3[3]; + struct toggles toggle; + u8 pad1[4]; + u16 dl_mdm_len1; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_start; + + u16 dl_diag_len1; + u16 dl_mdm_len2; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_app1_len; + + u16 dl_diag_len2; + u16 dl_ctrl_len; + u16 dl_app2_len; + u8 pad2[16]; + u16 ul_mdm_len1; + u16 ul_start; + u16 ul_diag_len; + u16 ul_mdm_len2; + u16 ul_app1_len; + u16 ul_app2_len; + u16 ul_ctrl_len; +} __attribute__ ((packed)); + +/* This stores all control downlink flags */ +struct ctrl_dl { + u8 port; + unsigned int reserved:4; + unsigned int CTS:1; + unsigned int RI:1; + unsigned int DCD:1; + unsigned int DSR:1; +} __attribute__ ((packed)); + +/* This stores all control uplink flags */ +struct ctrl_ul { + u8 port; + unsigned int reserved:6; + unsigned int RTS:1; + unsigned int DTR:1; +} __attribute__ ((packed)); + +#else +/* Little endian */ + +/* This represents the toggle information */ +struct toggles { + unsigned int mdm_ul:1; + unsigned int mdm_dl:1; + unsigned int diag_dl:1; + unsigned int enabled:5; /* + * Toggle fields are valid if enabled is 0, + * else A-channels must always be used. + */ +} __attribute__ ((packed)); + +/* Configuration table to read at startup of card */ +struct config_table { + u32 signature; + u16 version; + u16 product_information; + struct toggles toggle; + u8 pad1[7]; + u16 dl_start; + u16 dl_mdm_len1; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_mdm_len2; + u16 dl_diag_len1; + u16 dl_diag_len2; + u16 dl_app1_len; + u16 dl_app2_len; + u16 dl_ctrl_len; + u8 pad2[16]; + u16 ul_start; + u16 ul_mdm_len2; + u16 ul_mdm_len1; + u16 ul_diag_len; + u16 ul_app1_len; + u16 ul_app2_len; + u16 ul_ctrl_len; +} __attribute__ ((packed)); + +/* This stores all control downlink flags */ +struct ctrl_dl { + unsigned int DSR:1; + unsigned int DCD:1; + unsigned int RI:1; + unsigned int CTS:1; + unsigned int reserverd:4; + u8 port; +} __attribute__ ((packed)); + +/* This stores all control uplink flags */ +struct ctrl_ul { + unsigned int DTR:1; + unsigned int RTS:1; + unsigned int reserved:6; + u8 port; +} __attribute__ ((packed)); +#endif + +/* This holds all information that is needed regarding a port */ +struct port { + struct tty_port port; + u8 update_flow_control; + struct ctrl_ul ctrl_ul; + struct ctrl_dl ctrl_dl; + struct kfifo fifo_ul; + void __iomem *dl_addr[2]; + u32 dl_size[2]; + u8 toggle_dl; + void __iomem *ul_addr[2]; + u32 ul_size[2]; + u8 toggle_ul; + u16 token_dl; + + /* mutex to ensure one access patch to this port */ + struct mutex tty_sem; + wait_queue_head_t tty_wait; + struct async_icount tty_icount; + + struct nozomi *dc; +}; + +/* Private data one for each card in the system */ +struct nozomi { + void __iomem *base_addr; + unsigned long flip; + + /* Pointers to registers */ + void __iomem *reg_iir; + void __iomem *reg_fcr; + void __iomem *reg_ier; + + u16 last_ier; + enum card_type card_type; + struct config_table config_table; /* Configuration table */ + struct pci_dev *pdev; + struct port port[NOZOMI_MAX_PORTS]; + u8 *send_buf; + + spinlock_t spin_mutex; /* secures access to registers and tty */ + + unsigned int index_start; + enum card_state state; + u32 open_ttys; +}; + +/* This is a data packet that is read or written to/from card */ +struct buffer { + u32 size; /* size is the length of the data buffer */ + u8 *data; +} __attribute__ ((packed)); + +/* Global variables */ +static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = { + {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */ + {}, +}; + +MODULE_DEVICE_TABLE(pci, nozomi_pci_tbl); + +static struct nozomi *ndevs[NOZOMI_MAX_CARDS]; +static struct tty_driver *ntty_driver; + +static const struct tty_port_operations noz_tty_port_ops; + +/* + * find card by tty_index + */ +static inline struct nozomi *get_dc_by_tty(const struct tty_struct *tty) +{ + return tty ? ndevs[tty->index / MAX_PORT] : NULL; +} + +static inline struct port *get_port_by_tty(const struct tty_struct *tty) +{ + struct nozomi *ndev = get_dc_by_tty(tty); + return ndev ? &ndev->port[tty->index % MAX_PORT] : NULL; +} + +/* + * TODO: + * -Optimize + * -Rewrite cleaner + */ + +static void read_mem32(u32 *buf, const void __iomem *mem_addr_start, + u32 size_bytes) +{ + u32 i = 0; + const u32 __iomem *ptr = mem_addr_start; + u16 *buf16; + + if (unlikely(!ptr || !buf)) + goto out; + + /* shortcut for extremely often used cases */ + switch (size_bytes) { + case 2: /* 2 bytes */ + buf16 = (u16 *) buf; + *buf16 = __le16_to_cpu(readw(ptr)); + goto out; + break; + case 4: /* 4 bytes */ + *(buf) = __le32_to_cpu(readl(ptr)); + goto out; + break; + } + + while (i < size_bytes) { + if (size_bytes - i == 2) { + /* Handle 2 bytes in the end */ + buf16 = (u16 *) buf; + *(buf16) = __le16_to_cpu(readw(ptr)); + i += 2; + } else { + /* Read 4 bytes */ + *(buf) = __le32_to_cpu(readl(ptr)); + i += 4; + } + buf++; + ptr++; + } +out: + return; +} + +/* + * TODO: + * -Optimize + * -Rewrite cleaner + */ +static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf, + u32 size_bytes) +{ + u32 i = 0; + u32 __iomem *ptr = mem_addr_start; + const u16 *buf16; + + if (unlikely(!ptr || !buf)) + return 0; + + /* shortcut for extremely often used cases */ + switch (size_bytes) { + case 2: /* 2 bytes */ + buf16 = (const u16 *)buf; + writew(__cpu_to_le16(*buf16), ptr); + return 2; + break; + case 1: /* + * also needs to write 4 bytes in this case + * so falling through.. + */ + case 4: /* 4 bytes */ + writel(__cpu_to_le32(*buf), ptr); + return 4; + break; + } + + while (i < size_bytes) { + if (size_bytes - i == 2) { + /* 2 bytes */ + buf16 = (const u16 *)buf; + writew(__cpu_to_le16(*buf16), ptr); + i += 2; + } else { + /* 4 bytes */ + writel(__cpu_to_le32(*buf), ptr); + i += 4; + } + buf++; + ptr++; + } + return i; +} + +/* Setup pointers to different channels and also setup buffer sizes. */ +static void setup_memory(struct nozomi *dc) +{ + void __iomem *offset = dc->base_addr + dc->config_table.dl_start; + /* The length reported is including the length field of 4 bytes, + * hence subtract with 4. + */ + const u16 buff_offset = 4; + + /* Modem port dl configuration */ + dc->port[PORT_MDM].dl_addr[CH_A] = offset; + dc->port[PORT_MDM].dl_addr[CH_B] = + (offset += dc->config_table.dl_mdm_len1); + dc->port[PORT_MDM].dl_size[CH_A] = + dc->config_table.dl_mdm_len1 - buff_offset; + dc->port[PORT_MDM].dl_size[CH_B] = + dc->config_table.dl_mdm_len2 - buff_offset; + + /* Diag port dl configuration */ + dc->port[PORT_DIAG].dl_addr[CH_A] = + (offset += dc->config_table.dl_mdm_len2); + dc->port[PORT_DIAG].dl_size[CH_A] = + dc->config_table.dl_diag_len1 - buff_offset; + dc->port[PORT_DIAG].dl_addr[CH_B] = + (offset += dc->config_table.dl_diag_len1); + dc->port[PORT_DIAG].dl_size[CH_B] = + dc->config_table.dl_diag_len2 - buff_offset; + + /* App1 port dl configuration */ + dc->port[PORT_APP1].dl_addr[CH_A] = + (offset += dc->config_table.dl_diag_len2); + dc->port[PORT_APP1].dl_size[CH_A] = + dc->config_table.dl_app1_len - buff_offset; + + /* App2 port dl configuration */ + dc->port[PORT_APP2].dl_addr[CH_A] = + (offset += dc->config_table.dl_app1_len); + dc->port[PORT_APP2].dl_size[CH_A] = + dc->config_table.dl_app2_len - buff_offset; + + /* Ctrl dl configuration */ + dc->port[PORT_CTRL].dl_addr[CH_A] = + (offset += dc->config_table.dl_app2_len); + dc->port[PORT_CTRL].dl_size[CH_A] = + dc->config_table.dl_ctrl_len - buff_offset; + + offset = dc->base_addr + dc->config_table.ul_start; + + /* Modem Port ul configuration */ + dc->port[PORT_MDM].ul_addr[CH_A] = offset; + dc->port[PORT_MDM].ul_size[CH_A] = + dc->config_table.ul_mdm_len1 - buff_offset; + dc->port[PORT_MDM].ul_addr[CH_B] = + (offset += dc->config_table.ul_mdm_len1); + dc->port[PORT_MDM].ul_size[CH_B] = + dc->config_table.ul_mdm_len2 - buff_offset; + + /* Diag port ul configuration */ + dc->port[PORT_DIAG].ul_addr[CH_A] = + (offset += dc->config_table.ul_mdm_len2); + dc->port[PORT_DIAG].ul_size[CH_A] = + dc->config_table.ul_diag_len - buff_offset; + + /* App1 port ul configuration */ + dc->port[PORT_APP1].ul_addr[CH_A] = + (offset += dc->config_table.ul_diag_len); + dc->port[PORT_APP1].ul_size[CH_A] = + dc->config_table.ul_app1_len - buff_offset; + + /* App2 port ul configuration */ + dc->port[PORT_APP2].ul_addr[CH_A] = + (offset += dc->config_table.ul_app1_len); + dc->port[PORT_APP2].ul_size[CH_A] = + dc->config_table.ul_app2_len - buff_offset; + + /* Ctrl ul configuration */ + dc->port[PORT_CTRL].ul_addr[CH_A] = + (offset += dc->config_table.ul_app2_len); + dc->port[PORT_CTRL].ul_size[CH_A] = + dc->config_table.ul_ctrl_len - buff_offset; +} + +/* Dump config table under initalization phase */ +#ifdef DEBUG +static void dump_table(const struct nozomi *dc) +{ + DBG3("signature: 0x%08X", dc->config_table.signature); + DBG3("version: 0x%04X", dc->config_table.version); + DBG3("product_information: 0x%04X", \ + dc->config_table.product_information); + DBG3("toggle enabled: %d", dc->config_table.toggle.enabled); + DBG3("toggle up_mdm: %d", dc->config_table.toggle.mdm_ul); + DBG3("toggle dl_mdm: %d", dc->config_table.toggle.mdm_dl); + DBG3("toggle dl_dbg: %d", dc->config_table.toggle.diag_dl); + + DBG3("dl_start: 0x%04X", dc->config_table.dl_start); + DBG3("dl_mdm_len0: 0x%04X, %d", dc->config_table.dl_mdm_len1, + dc->config_table.dl_mdm_len1); + DBG3("dl_mdm_len1: 0x%04X, %d", dc->config_table.dl_mdm_len2, + dc->config_table.dl_mdm_len2); + DBG3("dl_diag_len0: 0x%04X, %d", dc->config_table.dl_diag_len1, + dc->config_table.dl_diag_len1); + DBG3("dl_diag_len1: 0x%04X, %d", dc->config_table.dl_diag_len2, + dc->config_table.dl_diag_len2); + DBG3("dl_app1_len: 0x%04X, %d", dc->config_table.dl_app1_len, + dc->config_table.dl_app1_len); + DBG3("dl_app2_len: 0x%04X, %d", dc->config_table.dl_app2_len, + dc->config_table.dl_app2_len); + DBG3("dl_ctrl_len: 0x%04X, %d", dc->config_table.dl_ctrl_len, + dc->config_table.dl_ctrl_len); + DBG3("ul_start: 0x%04X, %d", dc->config_table.ul_start, + dc->config_table.ul_start); + DBG3("ul_mdm_len[0]: 0x%04X, %d", dc->config_table.ul_mdm_len1, + dc->config_table.ul_mdm_len1); + DBG3("ul_mdm_len[1]: 0x%04X, %d", dc->config_table.ul_mdm_len2, + dc->config_table.ul_mdm_len2); + DBG3("ul_diag_len: 0x%04X, %d", dc->config_table.ul_diag_len, + dc->config_table.ul_diag_len); + DBG3("ul_app1_len: 0x%04X, %d", dc->config_table.ul_app1_len, + dc->config_table.ul_app1_len); + DBG3("ul_app2_len: 0x%04X, %d", dc->config_table.ul_app2_len, + dc->config_table.ul_app2_len); + DBG3("ul_ctrl_len: 0x%04X, %d", dc->config_table.ul_ctrl_len, + dc->config_table.ul_ctrl_len); +} +#else +static inline void dump_table(const struct nozomi *dc) { } +#endif + +/* + * Read configuration table from card under intalization phase + * Returns 1 if ok, else 0 + */ +static int nozomi_read_config_table(struct nozomi *dc) +{ + read_mem32((u32 *) &dc->config_table, dc->base_addr + 0, + sizeof(struct config_table)); + + if (dc->config_table.signature != CONFIG_MAGIC) { + dev_err(&dc->pdev->dev, "ConfigTable Bad! 0x%08X != 0x%08X\n", + dc->config_table.signature, CONFIG_MAGIC); + return 0; + } + + if ((dc->config_table.version == 0) + || (dc->config_table.toggle.enabled == TOGGLE_VALID)) { + int i; + DBG1("Second phase, configuring card"); + + setup_memory(dc); + + dc->port[PORT_MDM].toggle_ul = dc->config_table.toggle.mdm_ul; + dc->port[PORT_MDM].toggle_dl = dc->config_table.toggle.mdm_dl; + dc->port[PORT_DIAG].toggle_dl = dc->config_table.toggle.diag_dl; + DBG1("toggle ports: MDM UL:%d MDM DL:%d, DIAG DL:%d", + dc->port[PORT_MDM].toggle_ul, + dc->port[PORT_MDM].toggle_dl, dc->port[PORT_DIAG].toggle_dl); + + dump_table(dc); + + for (i = PORT_MDM; i < MAX_PORT; i++) { + memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); + memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); + } + + /* Enable control channel */ + dc->last_ier = dc->last_ier | CTRL_DL; + writew(dc->last_ier, dc->reg_ier); + + dc->state = NOZOMI_STATE_ALLOCATED; + dev_info(&dc->pdev->dev, "Initialization OK!\n"); + return 1; + } + + if ((dc->config_table.version > 0) + && (dc->config_table.toggle.enabled != TOGGLE_VALID)) { + u32 offset = 0; + DBG1("First phase: pushing upload buffers, clearing download"); + + dev_info(&dc->pdev->dev, "Version of card: %d\n", + dc->config_table.version); + + /* Here we should disable all I/O over F32. */ + setup_memory(dc); + + /* + * We should send ALL channel pair tokens back along + * with reset token + */ + + /* push upload modem buffers */ + write_mem32(dc->port[PORT_MDM].ul_addr[CH_A], + (u32 *) &offset, 4); + write_mem32(dc->port[PORT_MDM].ul_addr[CH_B], + (u32 *) &offset, 4); + + writew(MDM_UL | DIAG_DL | MDM_DL, dc->reg_fcr); + + DBG1("First phase done"); + } + + return 1; +} + +/* Enable uplink interrupts */ +static void enable_transmit_ul(enum port_type port, struct nozomi *dc) +{ + static const u16 mask[] = {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier |= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Disable uplink interrupts */ +static void disable_transmit_ul(enum port_type port, struct nozomi *dc) +{ + static const u16 mask[] = + {~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier &= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Enable downlink interrupts */ +static void enable_transmit_dl(enum port_type port, struct nozomi *dc) +{ + static const u16 mask[] = {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier |= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Disable downlink interrupts */ +static void disable_transmit_dl(enum port_type port, struct nozomi *dc) +{ + static const u16 mask[] = + {~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier &= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* + * Return 1 - send buffer to card and ack. + * Return 0 - don't ack, don't send buffer to card. + */ +static int send_data(enum port_type index, struct nozomi *dc) +{ + u32 size = 0; + struct port *port = &dc->port[index]; + const u8 toggle = port->toggle_ul; + void __iomem *addr = port->ul_addr[toggle]; + const u32 ul_size = port->ul_size[toggle]; + struct tty_struct *tty = tty_port_tty_get(&port->port); + + /* Get data from tty and place in buf for now */ + size = kfifo_out(&port->fifo_ul, dc->send_buf, + ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); + + if (size == 0) { + DBG4("No more data to send, disable link:"); + tty_kref_put(tty); + return 0; + } + + /* DUMP(buf, size); */ + + /* Write length + data */ + write_mem32(addr, (u32 *) &size, 4); + write_mem32(addr + 4, (u32 *) dc->send_buf, size); + + if (tty) + tty_wakeup(tty); + + tty_kref_put(tty); + return 1; +} + +/* If all data has been read, return 1, else 0 */ +static int receive_data(enum port_type index, struct nozomi *dc) +{ + u8 buf[RECEIVE_BUF_MAX] = { 0 }; + int size; + u32 offset = 4; + struct port *port = &dc->port[index]; + void __iomem *addr = port->dl_addr[port->toggle_dl]; + struct tty_struct *tty = tty_port_tty_get(&port->port); + int i, ret; + + if (unlikely(!tty)) { + DBG1("tty not open for port: %d?", index); + return 1; + } + + read_mem32((u32 *) &size, addr, 4); + /* DBG1( "%d bytes port: %d", size, index); */ + + if (test_bit(TTY_THROTTLED, &tty->flags)) { + DBG1("No room in tty, don't read data, don't ack interrupt, " + "disable interrupt"); + + /* disable interrupt in downlink... */ + disable_transmit_dl(index, dc); + ret = 0; + goto put; + } + + if (unlikely(size == 0)) { + dev_err(&dc->pdev->dev, "size == 0?\n"); + ret = 1; + goto put; + } + + while (size > 0) { + read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX); + + if (size == 1) { + tty_insert_flip_char(tty, buf[0], TTY_NORMAL); + size = 0; + } else if (size < RECEIVE_BUF_MAX) { + size -= tty_insert_flip_string(tty, (char *) buf, size); + } else { + i = tty_insert_flip_string(tty, \ + (char *) buf, RECEIVE_BUF_MAX); + size -= i; + offset += i; + } + } + + set_bit(index, &dc->flip); + ret = 1; +put: + tty_kref_put(tty); + return ret; +} + +/* Debug for interrupts */ +#ifdef DEBUG +static char *interrupt2str(u16 interrupt) +{ + static char buf[TMP_BUF_MAX]; + char *p = buf; + + interrupt & MDM_DL1 ? p += snprintf(p, TMP_BUF_MAX, "MDM_DL1 ") : NULL; + interrupt & MDM_DL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "MDM_DL2 ") : NULL; + + interrupt & MDM_UL1 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "MDM_UL1 ") : NULL; + interrupt & MDM_UL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "MDM_UL2 ") : NULL; + + interrupt & DIAG_DL1 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "DIAG_DL1 ") : NULL; + interrupt & DIAG_DL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "DIAG_DL2 ") : NULL; + + interrupt & DIAG_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "DIAG_UL ") : NULL; + + interrupt & APP1_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "APP1_DL ") : NULL; + interrupt & APP2_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "APP2_DL ") : NULL; + + interrupt & APP1_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "APP1_UL ") : NULL; + interrupt & APP2_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "APP2_UL ") : NULL; + + interrupt & CTRL_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "CTRL_DL ") : NULL; + interrupt & CTRL_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "CTRL_UL ") : NULL; + + interrupt & RESET ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "RESET ") : NULL; + + return buf; +} +#endif + +/* + * Receive flow control + * Return 1 - If ok, else 0 + */ +static int receive_flow_control(struct nozomi *dc) +{ + enum port_type port = PORT_MDM; + struct ctrl_dl ctrl_dl; + struct ctrl_dl old_ctrl; + u16 enable_ier = 0; + + read_mem32((u32 *) &ctrl_dl, dc->port[PORT_CTRL].dl_addr[CH_A], 2); + + switch (ctrl_dl.port) { + case CTRL_CMD: + DBG1("The Base Band sends this value as a response to a " + "request for IMSI detach sent over the control " + "channel uplink (see section 7.6.1)."); + break; + case CTRL_MDM: + port = PORT_MDM; + enable_ier = MDM_DL; + break; + case CTRL_DIAG: + port = PORT_DIAG; + enable_ier = DIAG_DL; + break; + case CTRL_APP1: + port = PORT_APP1; + enable_ier = APP1_DL; + break; + case CTRL_APP2: + port = PORT_APP2; + enable_ier = APP2_DL; + if (dc->state == NOZOMI_STATE_ALLOCATED) { + /* + * After card initialization the flow control + * received for APP2 is always the last + */ + dc->state = NOZOMI_STATE_READY; + dev_info(&dc->pdev->dev, "Device READY!\n"); + } + break; + default: + dev_err(&dc->pdev->dev, + "ERROR: flow control received for non-existing port\n"); + return 0; + }; + + DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl), + *((u16 *)&ctrl_dl)); + + old_ctrl = dc->port[port].ctrl_dl; + dc->port[port].ctrl_dl = ctrl_dl; + + if (old_ctrl.CTS == 1 && ctrl_dl.CTS == 0) { + DBG1("Disable interrupt (0x%04X) on port: %d", + enable_ier, port); + disable_transmit_ul(port, dc); + + } else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) { + + if (kfifo_len(&dc->port[port].fifo_ul)) { + DBG1("Enable interrupt (0x%04X) on port: %d", + enable_ier, port); + DBG1("Data in buffer [%d], enable transmit! ", + kfifo_len(&dc->port[port].fifo_ul)); + enable_transmit_ul(port, dc); + } else { + DBG1("No data in buffer..."); + } + } + + if (*(u16 *)&old_ctrl == *(u16 *)&ctrl_dl) { + DBG1(" No change in mctrl"); + return 1; + } + /* Update statistics */ + if (old_ctrl.CTS != ctrl_dl.CTS) + dc->port[port].tty_icount.cts++; + if (old_ctrl.DSR != ctrl_dl.DSR) + dc->port[port].tty_icount.dsr++; + if (old_ctrl.RI != ctrl_dl.RI) + dc->port[port].tty_icount.rng++; + if (old_ctrl.DCD != ctrl_dl.DCD) + dc->port[port].tty_icount.dcd++; + + wake_up_interruptible(&dc->port[port].tty_wait); + + DBG1("port: %d DCD(%d), CTS(%d), RI(%d), DSR(%d)", + port, + dc->port[port].tty_icount.dcd, dc->port[port].tty_icount.cts, + dc->port[port].tty_icount.rng, dc->port[port].tty_icount.dsr); + + return 1; +} + +static enum ctrl_port_type port2ctrl(enum port_type port, + const struct nozomi *dc) +{ + switch (port) { + case PORT_MDM: + return CTRL_MDM; + case PORT_DIAG: + return CTRL_DIAG; + case PORT_APP1: + return CTRL_APP1; + case PORT_APP2: + return CTRL_APP2; + default: + dev_err(&dc->pdev->dev, + "ERROR: send flow control " \ + "received for non-existing port\n"); + }; + return CTRL_ERROR; +} + +/* + * Send flow control, can only update one channel at a time + * Return 0 - If we have updated all flow control + * Return 1 - If we need to update more flow control, ack current enable more + */ +static int send_flow_control(struct nozomi *dc) +{ + u32 i, more_flow_control_to_be_updated = 0; + u16 *ctrl; + + for (i = PORT_MDM; i < MAX_PORT; i++) { + if (dc->port[i].update_flow_control) { + if (more_flow_control_to_be_updated) { + /* We have more flow control to be updated */ + return 1; + } + dc->port[i].ctrl_ul.port = port2ctrl(i, dc); + ctrl = (u16 *)&dc->port[i].ctrl_ul; + write_mem32(dc->port[PORT_CTRL].ul_addr[0], \ + (u32 *) ctrl, 2); + dc->port[i].update_flow_control = 0; + more_flow_control_to_be_updated = 1; + } + } + return 0; +} + +/* + * Handle downlink data, ports that are handled are modem and diagnostics + * Return 1 - ok + * Return 0 - toggle fields are out of sync + */ +static int handle_data_dl(struct nozomi *dc, enum port_type port, u8 *toggle, + u16 read_iir, u16 mask1, u16 mask2) +{ + if (*toggle == 0 && read_iir & mask1) { + if (receive_data(port, dc)) { + writew(mask1, dc->reg_fcr); + *toggle = !(*toggle); + } + + if (read_iir & mask2) { + if (receive_data(port, dc)) { + writew(mask2, dc->reg_fcr); + *toggle = !(*toggle); + } + } + } else if (*toggle == 1 && read_iir & mask2) { + if (receive_data(port, dc)) { + writew(mask2, dc->reg_fcr); + *toggle = !(*toggle); + } + + if (read_iir & mask1) { + if (receive_data(port, dc)) { + writew(mask1, dc->reg_fcr); + *toggle = !(*toggle); + } + } + } else { + dev_err(&dc->pdev->dev, "port out of sync!, toggle:%d\n", + *toggle); + return 0; + } + return 1; +} + +/* + * Handle uplink data, this is currently for the modem port + * Return 1 - ok + * Return 0 - toggle field are out of sync + */ +static int handle_data_ul(struct nozomi *dc, enum port_type port, u16 read_iir) +{ + u8 *toggle = &(dc->port[port].toggle_ul); + + if (*toggle == 0 && read_iir & MDM_UL1) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL1, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + + if (read_iir & MDM_UL2) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL2, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + } + + } else if (*toggle == 1 && read_iir & MDM_UL2) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL2, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + + if (read_iir & MDM_UL1) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL1, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + } + } else { + writew(read_iir & MDM_UL, dc->reg_fcr); + dev_err(&dc->pdev->dev, "port out of sync!\n"); + return 0; + } + return 1; +} + +static irqreturn_t interrupt_handler(int irq, void *dev_id) +{ + struct nozomi *dc = dev_id; + unsigned int a; + u16 read_iir; + + if (!dc) + return IRQ_NONE; + + spin_lock(&dc->spin_mutex); + read_iir = readw(dc->reg_iir); + + /* Card removed */ + if (read_iir == (u16)-1) + goto none; + /* + * Just handle interrupt enabled in IER + * (by masking with dc->last_ier) + */ + read_iir &= dc->last_ier; + + if (read_iir == 0) + goto none; + + + DBG4("%s irq:0x%04X, prev:0x%04X", interrupt2str(read_iir), read_iir, + dc->last_ier); + + if (read_iir & RESET) { + if (unlikely(!nozomi_read_config_table(dc))) { + dc->last_ier = 0x0; + writew(dc->last_ier, dc->reg_ier); + dev_err(&dc->pdev->dev, "Could not read status from " + "card, we should disable interface\n"); + } else { + writew(RESET, dc->reg_fcr); + } + /* No more useful info if this was the reset interrupt. */ + goto exit_handler; + } + if (read_iir & CTRL_UL) { + DBG1("CTRL_UL"); + dc->last_ier &= ~CTRL_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_flow_control(dc)) { + writew(CTRL_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | CTRL_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & CTRL_DL) { + receive_flow_control(dc); + writew(CTRL_DL, dc->reg_fcr); + } + if (read_iir & MDM_DL) { + if (!handle_data_dl(dc, PORT_MDM, + &(dc->port[PORT_MDM].toggle_dl), read_iir, + MDM_DL1, MDM_DL2)) { + dev_err(&dc->pdev->dev, "MDM_DL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & MDM_UL) { + if (!handle_data_ul(dc, PORT_MDM, read_iir)) { + dev_err(&dc->pdev->dev, "MDM_UL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & DIAG_DL) { + if (!handle_data_dl(dc, PORT_DIAG, + &(dc->port[PORT_DIAG].toggle_dl), read_iir, + DIAG_DL1, DIAG_DL2)) { + dev_err(&dc->pdev->dev, "DIAG_DL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & DIAG_UL) { + dc->last_ier &= ~DIAG_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_DIAG, dc)) { + writew(DIAG_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | DIAG_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & APP1_DL) { + if (receive_data(PORT_APP1, dc)) + writew(APP1_DL, dc->reg_fcr); + } + if (read_iir & APP1_UL) { + dc->last_ier &= ~APP1_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_APP1, dc)) { + writew(APP1_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | APP1_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & APP2_DL) { + if (receive_data(PORT_APP2, dc)) + writew(APP2_DL, dc->reg_fcr); + } + if (read_iir & APP2_UL) { + dc->last_ier &= ~APP2_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_APP2, dc)) { + writew(APP2_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | APP2_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + +exit_handler: + spin_unlock(&dc->spin_mutex); + for (a = 0; a < NOZOMI_MAX_PORTS; a++) { + struct tty_struct *tty; + if (test_and_clear_bit(a, &dc->flip)) { + tty = tty_port_tty_get(&dc->port[a].port); + if (tty) + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } + } + return IRQ_HANDLED; +none: + spin_unlock(&dc->spin_mutex); + return IRQ_NONE; +} + +static void nozomi_get_card_type(struct nozomi *dc) +{ + int i; + u32 size = 0; + + for (i = 0; i < 6; i++) + size += pci_resource_len(dc->pdev, i); + + /* Assume card type F32_8 if no match */ + dc->card_type = size == 2048 ? F32_2 : F32_8; + + dev_info(&dc->pdev->dev, "Card type is: %d\n", dc->card_type); +} + +static void nozomi_setup_private_data(struct nozomi *dc) +{ + void __iomem *offset = dc->base_addr + dc->card_type / 2; + unsigned int i; + + dc->reg_fcr = (void __iomem *)(offset + R_FCR); + dc->reg_iir = (void __iomem *)(offset + R_IIR); + dc->reg_ier = (void __iomem *)(offset + R_IER); + dc->last_ier = 0; + dc->flip = 0; + + dc->port[PORT_MDM].token_dl = MDM_DL; + dc->port[PORT_DIAG].token_dl = DIAG_DL; + dc->port[PORT_APP1].token_dl = APP1_DL; + dc->port[PORT_APP2].token_dl = APP2_DL; + + for (i = 0; i < MAX_PORT; i++) + init_waitqueue_head(&dc->port[i].tty_wait); +} + +static ssize_t card_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev)); + + return sprintf(buf, "%d\n", dc->card_type); +} +static DEVICE_ATTR(card_type, S_IRUGO, card_type_show, NULL); + +static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev)); + + return sprintf(buf, "%u\n", dc->open_ttys); +} +static DEVICE_ATTR(open_ttys, S_IRUGO, open_ttys_show, NULL); + +static void make_sysfs_files(struct nozomi *dc) +{ + if (device_create_file(&dc->pdev->dev, &dev_attr_card_type)) + dev_err(&dc->pdev->dev, + "Could not create sysfs file for card_type\n"); + if (device_create_file(&dc->pdev->dev, &dev_attr_open_ttys)) + dev_err(&dc->pdev->dev, + "Could not create sysfs file for open_ttys\n"); +} + +static void remove_sysfs_files(struct nozomi *dc) +{ + device_remove_file(&dc->pdev->dev, &dev_attr_card_type); + device_remove_file(&dc->pdev->dev, &dev_attr_open_ttys); +} + +/* Allocate memory for one device */ +static int __devinit nozomi_card_init(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + resource_size_t start; + int ret; + struct nozomi *dc = NULL; + int ndev_idx; + int i; + + dev_dbg(&pdev->dev, "Init, new card found\n"); + + for (ndev_idx = 0; ndev_idx < ARRAY_SIZE(ndevs); ndev_idx++) + if (!ndevs[ndev_idx]) + break; + + if (ndev_idx >= ARRAY_SIZE(ndevs)) { + dev_err(&pdev->dev, "no free tty range for this card left\n"); + ret = -EIO; + goto err; + } + + dc = kzalloc(sizeof(struct nozomi), GFP_KERNEL); + if (unlikely(!dc)) { + dev_err(&pdev->dev, "Could not allocate memory\n"); + ret = -ENOMEM; + goto err_free; + } + + dc->pdev = pdev; + + ret = pci_enable_device(dc->pdev); + if (ret) { + dev_err(&pdev->dev, "Failed to enable PCI Device\n"); + goto err_free; + } + + ret = pci_request_regions(dc->pdev, NOZOMI_NAME); + if (ret) { + dev_err(&pdev->dev, "I/O address 0x%04x already in use\n", + (int) /* nozomi_private.io_addr */ 0); + goto err_disable_device; + } + + start = pci_resource_start(dc->pdev, 0); + if (start == 0) { + dev_err(&pdev->dev, "No I/O address for card detected\n"); + ret = -ENODEV; + goto err_rel_regs; + } + + /* Find out what card type it is */ + nozomi_get_card_type(dc); + + dc->base_addr = ioremap_nocache(start, dc->card_type); + if (!dc->base_addr) { + dev_err(&pdev->dev, "Unable to map card MMIO\n"); + ret = -ENODEV; + goto err_rel_regs; + } + + dc->send_buf = kmalloc(SEND_BUF_MAX, GFP_KERNEL); + if (!dc->send_buf) { + dev_err(&pdev->dev, "Could not allocate send buffer?\n"); + ret = -ENOMEM; + goto err_free_sbuf; + } + + for (i = PORT_MDM; i < MAX_PORT; i++) { + if (kfifo_alloc(&dc->port[i].fifo_ul, + FIFO_BUFFER_SIZE_UL, GFP_ATOMIC)) { + dev_err(&pdev->dev, + "Could not allocate kfifo buffer\n"); + ret = -ENOMEM; + goto err_free_kfifo; + } + } + + spin_lock_init(&dc->spin_mutex); + + nozomi_setup_private_data(dc); + + /* Disable all interrupts */ + dc->last_ier = 0; + writew(dc->last_ier, dc->reg_ier); + + ret = request_irq(pdev->irq, &interrupt_handler, IRQF_SHARED, + NOZOMI_NAME, dc); + if (unlikely(ret)) { + dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq); + goto err_free_kfifo; + } + + DBG1("base_addr: %p", dc->base_addr); + + make_sysfs_files(dc); + + dc->index_start = ndev_idx * MAX_PORT; + ndevs[ndev_idx] = dc; + + pci_set_drvdata(pdev, dc); + + /* Enable RESET interrupt */ + dc->last_ier = RESET; + iowrite16(dc->last_ier, dc->reg_ier); + + dc->state = NOZOMI_STATE_ENABLED; + + for (i = 0; i < MAX_PORT; i++) { + struct device *tty_dev; + struct port *port = &dc->port[i]; + port->dc = dc; + mutex_init(&port->tty_sem); + tty_port_init(&port->port); + port->port.ops = &noz_tty_port_ops; + tty_dev = tty_register_device(ntty_driver, dc->index_start + i, + &pdev->dev); + + if (IS_ERR(tty_dev)) { + ret = PTR_ERR(tty_dev); + dev_err(&pdev->dev, "Could not allocate tty?\n"); + goto err_free_tty; + } + } + + return 0; + +err_free_tty: + for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) + tty_unregister_device(ntty_driver, i); +err_free_kfifo: + for (i = 0; i < MAX_PORT; i++) + kfifo_free(&dc->port[i].fifo_ul); +err_free_sbuf: + kfree(dc->send_buf); + iounmap(dc->base_addr); +err_rel_regs: + pci_release_regions(pdev); +err_disable_device: + pci_disable_device(pdev); +err_free: + kfree(dc); +err: + return ret; +} + +static void __devexit tty_exit(struct nozomi *dc) +{ + unsigned int i; + + DBG1(" "); + + flush_scheduled_work(); + + for (i = 0; i < MAX_PORT; ++i) { + struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port); + if (tty && list_empty(&tty->hangup_work.entry)) + tty_hangup(tty); + tty_kref_put(tty); + } + /* Racy below - surely should wait for scheduled work to be done or + complete off a hangup method ? */ + while (dc->open_ttys) + msleep(1); + for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) + tty_unregister_device(ntty_driver, i); +} + +/* Deallocate memory for one device */ +static void __devexit nozomi_card_exit(struct pci_dev *pdev) +{ + int i; + struct ctrl_ul ctrl; + struct nozomi *dc = pci_get_drvdata(pdev); + + /* Disable all interrupts */ + dc->last_ier = 0; + writew(dc->last_ier, dc->reg_ier); + + tty_exit(dc); + + /* Send 0x0001, command card to resend the reset token. */ + /* This is to get the reset when the module is reloaded. */ + ctrl.port = 0x00; + ctrl.reserved = 0; + ctrl.RTS = 0; + ctrl.DTR = 1; + DBG1("sending flow control 0x%04X", *((u16 *)&ctrl)); + + /* Setup dc->reg addresses to we can use defines here */ + write_mem32(dc->port[PORT_CTRL].ul_addr[0], (u32 *)&ctrl, 2); + writew(CTRL_UL, dc->reg_fcr); /* push the token to the card. */ + + remove_sysfs_files(dc); + + free_irq(pdev->irq, dc); + + for (i = 0; i < MAX_PORT; i++) + kfifo_free(&dc->port[i].fifo_ul); + + kfree(dc->send_buf); + + iounmap(dc->base_addr); + + pci_release_regions(pdev); + + pci_disable_device(pdev); + + ndevs[dc->index_start / MAX_PORT] = NULL; + + kfree(dc); +} + +static void set_rts(const struct tty_struct *tty, int rts) +{ + struct port *port = get_port_by_tty(tty); + + port->ctrl_ul.RTS = rts; + port->update_flow_control = 1; + enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty)); +} + +static void set_dtr(const struct tty_struct *tty, int dtr) +{ + struct port *port = get_port_by_tty(tty); + + DBG1("SETTING DTR index: %d, dtr: %d", tty->index, dtr); + + port->ctrl_ul.DTR = dtr; + port->update_flow_control = 1; + enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty)); +} + +/* + * ---------------------------------------------------------------------------- + * TTY code + * ---------------------------------------------------------------------------- + */ + +static int ntty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct port *port = get_port_by_tty(tty); + struct nozomi *dc = get_dc_by_tty(tty); + int ret; + if (!port || !dc || dc->state != NOZOMI_STATE_READY) + return -ENODEV; + ret = tty_init_termios(tty); + if (ret == 0) { + tty_driver_kref_get(driver); + tty->count++; + tty->driver_data = port; + driver->ttys[tty->index] = tty; + } + return ret; +} + +static void ntty_cleanup(struct tty_struct *tty) +{ + tty->driver_data = NULL; +} + +static int ntty_activate(struct tty_port *tport, struct tty_struct *tty) +{ + struct port *port = container_of(tport, struct port, port); + struct nozomi *dc = port->dc; + unsigned long flags; + + DBG1("open: %d", port->token_dl); + spin_lock_irqsave(&dc->spin_mutex, flags); + dc->last_ier = dc->last_ier | port->token_dl; + writew(dc->last_ier, dc->reg_ier); + dc->open_ttys++; + spin_unlock_irqrestore(&dc->spin_mutex, flags); + printk("noz: activated %d: %p\n", tty->index, tport); + return 0; +} + +static int ntty_open(struct tty_struct *tty, struct file *filp) +{ + struct port *port = tty->driver_data; + return tty_port_open(&port->port, tty, filp); +} + +static void ntty_shutdown(struct tty_port *tport) +{ + struct port *port = container_of(tport, struct port, port); + struct nozomi *dc = port->dc; + unsigned long flags; + + DBG1("close: %d", port->token_dl); + spin_lock_irqsave(&dc->spin_mutex, flags); + dc->last_ier &= ~(port->token_dl); + writew(dc->last_ier, dc->reg_ier); + dc->open_ttys--; + spin_unlock_irqrestore(&dc->spin_mutex, flags); + printk("noz: shutdown %p\n", tport); +} + +static void ntty_close(struct tty_struct *tty, struct file *filp) +{ + struct port *port = tty->driver_data; + if (port) + tty_port_close(&port->port, tty, filp); +} + +static void ntty_hangup(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + tty_port_hangup(&port->port); +} + +/* + * called when the userspace process writes to the tty (/dev/noz*). + * Data is inserted into a fifo, which is then read and transfered to the modem. + */ +static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, + int count) +{ + int rval = -EINVAL; + struct nozomi *dc = get_dc_by_tty(tty); + struct port *port = tty->driver_data; + unsigned long flags; + + /* DBG1( "WRITEx: %d, index = %d", count, index); */ + + if (!dc || !port) + return -ENODEV; + + mutex_lock(&port->tty_sem); + + if (unlikely(!port->port.count)) { + DBG1(" "); + goto exit; + } + + rval = kfifo_in(&port->fifo_ul, (unsigned char *)buffer, count); + + /* notify card */ + if (unlikely(dc == NULL)) { + DBG1("No device context?"); + goto exit; + } + + spin_lock_irqsave(&dc->spin_mutex, flags); + /* CTS is only valid on the modem channel */ + if (port == &(dc->port[PORT_MDM])) { + if (port->ctrl_dl.CTS) { + DBG4("Enable interrupt"); + enable_transmit_ul(tty->index % MAX_PORT, dc); + } else { + dev_err(&dc->pdev->dev, + "CTS not active on modem port?\n"); + } + } else { + enable_transmit_ul(tty->index % MAX_PORT, dc); + } + spin_unlock_irqrestore(&dc->spin_mutex, flags); + +exit: + mutex_unlock(&port->tty_sem); + return rval; +} + +/* + * Calculate how much is left in device + * This method is called by the upper tty layer. + * #according to sources N_TTY.c it expects a value >= 0 and + * does not check for negative values. + * + * If the port is unplugged report lots of room and let the bits + * dribble away so we don't block anything. + */ +static int ntty_write_room(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + int room = 4096; + const struct nozomi *dc = get_dc_by_tty(tty); + + if (dc) { + mutex_lock(&port->tty_sem); + if (port->port.count) + room = kfifo_avail(&port->fifo_ul); + mutex_unlock(&port->tty_sem); + } + return room; +} + +/* Gets io control parameters */ +static int ntty_tiocmget(struct tty_struct *tty) +{ + const struct port *port = tty->driver_data; + const struct ctrl_dl *ctrl_dl = &port->ctrl_dl; + const struct ctrl_ul *ctrl_ul = &port->ctrl_ul; + + /* Note: these could change under us but it is not clear this + matters if so */ + return (ctrl_ul->RTS ? TIOCM_RTS : 0) | + (ctrl_ul->DTR ? TIOCM_DTR : 0) | + (ctrl_dl->DCD ? TIOCM_CAR : 0) | + (ctrl_dl->RI ? TIOCM_RNG : 0) | + (ctrl_dl->DSR ? TIOCM_DSR : 0) | + (ctrl_dl->CTS ? TIOCM_CTS : 0); +} + +/* Sets io controls parameters */ +static int ntty_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + spin_lock_irqsave(&dc->spin_mutex, flags); + if (set & TIOCM_RTS) + set_rts(tty, 1); + else if (clear & TIOCM_RTS) + set_rts(tty, 0); + + if (set & TIOCM_DTR) + set_dtr(tty, 1); + else if (clear & TIOCM_DTR) + set_dtr(tty, 0); + spin_unlock_irqrestore(&dc->spin_mutex, flags); + + return 0; +} + +static int ntty_cflags_changed(struct port *port, unsigned long flags, + struct async_icount *cprev) +{ + const struct async_icount cnow = port->tty_icount; + int ret; + + ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((flags & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +static int ntty_tiocgicount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct port *port = tty->driver_data; + const struct async_icount cnow = port->tty_icount; + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + return 0; +} + +static int ntty_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct port *port = tty->driver_data; + int rval = -ENOIOCTLCMD; + + DBG1("******** IOCTL, cmd: %d", cmd); + + switch (cmd) { + case TIOCMIWAIT: { + struct async_icount cprev = port->tty_icount; + + rval = wait_event_interruptible(port->tty_wait, + ntty_cflags_changed(port, arg, &cprev)); + break; + } + default: + DBG1("ERR: 0x%08X, %d", cmd, cmd); + break; + }; + + return rval; +} + +/* + * Called by the upper tty layer when tty buffers are ready + * to receive data again after a call to throttle. + */ +static void ntty_unthrottle(struct tty_struct *tty) +{ + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + DBG1("UNTHROTTLE"); + spin_lock_irqsave(&dc->spin_mutex, flags); + enable_transmit_dl(tty->index % MAX_PORT, dc); + set_rts(tty, 1); + + spin_unlock_irqrestore(&dc->spin_mutex, flags); +} + +/* + * Called by the upper tty layer when the tty buffers are almost full. + * The driver should stop send more data. + */ +static void ntty_throttle(struct tty_struct *tty) +{ + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + DBG1("THROTTLE"); + spin_lock_irqsave(&dc->spin_mutex, flags); + set_rts(tty, 0); + spin_unlock_irqrestore(&dc->spin_mutex, flags); +} + +/* Returns number of chars in buffer, called by tty layer */ +static s32 ntty_chars_in_buffer(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + struct nozomi *dc = get_dc_by_tty(tty); + s32 rval = 0; + + if (unlikely(!dc || !port)) { + goto exit_in_buffer; + } + + if (unlikely(!port->port.count)) { + dev_err(&dc->pdev->dev, "No tty open?\n"); + goto exit_in_buffer; + } + + rval = kfifo_len(&port->fifo_ul); + +exit_in_buffer: + return rval; +} + +static const struct tty_port_operations noz_tty_port_ops = { + .activate = ntty_activate, + .shutdown = ntty_shutdown, +}; + +static const struct tty_operations tty_ops = { + .ioctl = ntty_ioctl, + .open = ntty_open, + .close = ntty_close, + .hangup = ntty_hangup, + .write = ntty_write, + .write_room = ntty_write_room, + .unthrottle = ntty_unthrottle, + .throttle = ntty_throttle, + .chars_in_buffer = ntty_chars_in_buffer, + .tiocmget = ntty_tiocmget, + .tiocmset = ntty_tiocmset, + .get_icount = ntty_tiocgicount, + .install = ntty_install, + .cleanup = ntty_cleanup, +}; + +/* Module initialization */ +static struct pci_driver nozomi_driver = { + .name = NOZOMI_NAME, + .id_table = nozomi_pci_tbl, + .probe = nozomi_card_init, + .remove = __devexit_p(nozomi_card_exit), +}; + +static __init int nozomi_init(void) +{ + int ret; + + printk(KERN_INFO "Initializing %s\n", VERSION_STRING); + + ntty_driver = alloc_tty_driver(NTTY_TTY_MAXMINORS); + if (!ntty_driver) + return -ENOMEM; + + ntty_driver->owner = THIS_MODULE; + ntty_driver->driver_name = NOZOMI_NAME_TTY; + ntty_driver->name = "noz"; + ntty_driver->major = 0; + ntty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ntty_driver->subtype = SERIAL_TYPE_NORMAL; + ntty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + ntty_driver->init_termios = tty_std_termios; + ntty_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | \ + HUPCL | CLOCAL; + ntty_driver->init_termios.c_ispeed = 115200; + ntty_driver->init_termios.c_ospeed = 115200; + tty_set_operations(ntty_driver, &tty_ops); + + ret = tty_register_driver(ntty_driver); + if (ret) { + printk(KERN_ERR "Nozomi: failed to register ntty driver\n"); + goto free_tty; + } + + ret = pci_register_driver(&nozomi_driver); + if (ret) { + printk(KERN_ERR "Nozomi: can't register pci driver\n"); + goto unr_tty; + } + + return 0; +unr_tty: + tty_unregister_driver(ntty_driver); +free_tty: + put_tty_driver(ntty_driver); + return ret; +} + +static __exit void nozomi_exit(void) +{ + printk(KERN_INFO "Unloading %s\n", DRIVER_DESC); + pci_unregister_driver(&nozomi_driver); + tty_unregister_driver(ntty_driver); + put_tty_driver(ntty_driver); +} + +module_init(nozomi_init); +module_exit(nozomi_exit); + +module_param(debug, int, S_IRUGO | S_IWUSR); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c new file mode 100644 index 000000000000..3780da8ad12d --- /dev/null +++ b/drivers/tty/rocket.c @@ -0,0 +1,3199 @@ +/* + * RocketPort device driver for Linux + * + * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000. + * + * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Kernel Synchronization: + * + * This driver has 2 kernel control paths - exception handlers (calls into the driver + * from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts + * are not used. + * + * Critical data: + * - rp_table[], accessed through passed "info" pointers, is a global (static) array of + * serial port state information and the xmit_buf circular buffer. Protected by + * a per port spinlock. + * - xmit_flags[], an array of ints indexed by line (port) number, indicating that there + * is data to be transmitted. Protected by atomic bit operations. + * - rp_num_ports, int indicating number of open ports, protected by atomic operations. + * + * rp_write() and rp_write_char() functions use a per port semaphore to protect against + * simultaneous access to the same port by more than one process. + */ + +/****** Defines ******/ +#define ROCKET_PARANOIA_CHECK +#define ROCKET_DISABLE_SIMUSAGE + +#undef ROCKET_SOFT_FLOW +#undef ROCKET_DEBUG_OPEN +#undef ROCKET_DEBUG_INTR +#undef ROCKET_DEBUG_WRITE +#undef ROCKET_DEBUG_FLOW +#undef ROCKET_DEBUG_THROTTLE +#undef ROCKET_DEBUG_WAIT_UNTIL_SENT +#undef ROCKET_DEBUG_RECEIVE +#undef ROCKET_DEBUG_HANGUP +#undef REV_PCI_ORDER +#undef ROCKET_DEBUG_IO + +#define POLL_PERIOD HZ/100 /* Polling period .01 seconds (10ms) */ + +/****** Kernel includes ******/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/****** RocketPort includes ******/ + +#include "rocket_int.h" +#include "rocket.h" + +#define ROCKET_VERSION "2.09" +#define ROCKET_DATE "12-June-2003" + +/****** RocketPort Local Variables ******/ + +static void rp_do_poll(unsigned long dummy); + +static struct tty_driver *rocket_driver; + +static struct rocket_version driver_version = { + ROCKET_VERSION, ROCKET_DATE +}; + +static struct r_port *rp_table[MAX_RP_PORTS]; /* The main repository of serial port state information. */ +static unsigned int xmit_flags[NUM_BOARDS]; /* Bit significant, indicates port had data to transmit. */ + /* eg. Bit 0 indicates port 0 has xmit data, ... */ +static atomic_t rp_num_ports_open; /* Number of serial ports open */ +static DEFINE_TIMER(rocket_timer, rp_do_poll, 0, 0); + +static unsigned long board1; /* ISA addresses, retrieved from rocketport.conf */ +static unsigned long board2; +static unsigned long board3; +static unsigned long board4; +static unsigned long controller; +static int support_low_speed; +static unsigned long modem1; +static unsigned long modem2; +static unsigned long modem3; +static unsigned long modem4; +static unsigned long pc104_1[8]; +static unsigned long pc104_2[8]; +static unsigned long pc104_3[8]; +static unsigned long pc104_4[8]; +static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 }; + +static int rp_baud_base[NUM_BOARDS]; /* Board config info (Someday make a per-board structure) */ +static unsigned long rcktpt_io_addr[NUM_BOARDS]; +static int rcktpt_type[NUM_BOARDS]; +static int is_PCI[NUM_BOARDS]; +static rocketModel_t rocketModel[NUM_BOARDS]; +static int max_board; +static const struct tty_port_operations rocket_port_ops; + +/* + * The following arrays define the interrupt bits corresponding to each AIOP. + * These bits are different between the ISA and regular PCI boards and the + * Universal PCI boards. + */ + +static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = { + AIOP_INTR_BIT_0, + AIOP_INTR_BIT_1, + AIOP_INTR_BIT_2, + AIOP_INTR_BIT_3 +}; + +static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = { + UPCI_AIOP_INTR_BIT_0, + UPCI_AIOP_INTR_BIT_1, + UPCI_AIOP_INTR_BIT_2, + UPCI_AIOP_INTR_BIT_3 +}; + +static Byte_t RData[RDATASIZE] = { + 0x00, 0x09, 0xf6, 0x82, + 0x02, 0x09, 0x86, 0xfb, + 0x04, 0x09, 0x00, 0x0a, + 0x06, 0x09, 0x01, 0x0a, + 0x08, 0x09, 0x8a, 0x13, + 0x0a, 0x09, 0xc5, 0x11, + 0x0c, 0x09, 0x86, 0x85, + 0x0e, 0x09, 0x20, 0x0a, + 0x10, 0x09, 0x21, 0x0a, + 0x12, 0x09, 0x41, 0xff, + 0x14, 0x09, 0x82, 0x00, + 0x16, 0x09, 0x82, 0x7b, + 0x18, 0x09, 0x8a, 0x7d, + 0x1a, 0x09, 0x88, 0x81, + 0x1c, 0x09, 0x86, 0x7a, + 0x1e, 0x09, 0x84, 0x81, + 0x20, 0x09, 0x82, 0x7c, + 0x22, 0x09, 0x0a, 0x0a +}; + +static Byte_t RRegData[RREGDATASIZE] = { + 0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */ + 0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */ + 0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */ + 0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */ + 0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */ + 0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */ + 0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */ + 0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */ + 0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */ + 0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */ + 0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */ + 0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */ + 0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */ +}; + +static CONTROLLER_T sController[CTL_SIZE] = { + {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, + {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, + {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, + {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, + {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, + {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, + {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, + {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}} +}; + +static Byte_t sBitMapClrTbl[8] = { + 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f +}; + +static Byte_t sBitMapSetTbl[8] = { + 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 +}; + +static int sClockPrescale = 0x14; + +/* + * Line number is the ttySIx number (x), the Minor number. We + * assign them sequentially, starting at zero. The following + * array keeps track of the line number assigned to a given board/aiop/channel. + */ +static unsigned char lineNumbers[MAX_RP_PORTS]; +static unsigned long nextLineNumber; + +/***** RocketPort Static Prototypes *********/ +static int __init init_ISA(int i); +static void rp_wait_until_sent(struct tty_struct *tty, int timeout); +static void rp_flush_buffer(struct tty_struct *tty); +static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model); +static unsigned char GetLineNumber(int ctrl, int aiop, int ch); +static unsigned char SetLineNumber(int ctrl, int aiop, int ch); +static void rp_start(struct tty_struct *tty); +static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum, + int ChanNum); +static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode); +static void sFlushRxFIFO(CHANNEL_T * ChP); +static void sFlushTxFIFO(CHANNEL_T * ChP); +static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags); +static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); +static void sModemReset(CONTROLLER_T * CtlP, int chan, int on); +static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); +static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); +static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, + ByteIO_t * AiopIOList, int AiopIOListSize, + WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, + int PeriodicOnly, int altChanRingIndicator, + int UPCIRingInd); +static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, + ByteIO_t * AiopIOList, int AiopIOListSize, + int IRQNum, Byte_t Frequency, int PeriodicOnly); +static int sReadAiopID(ByteIO_t io); +static int sReadAiopNumChan(WordIO_t io); + +MODULE_AUTHOR("Theodore Ts'o"); +MODULE_DESCRIPTION("Comtrol RocketPort driver"); +module_param(board1, ulong, 0); +MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1"); +module_param(board2, ulong, 0); +MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2"); +module_param(board3, ulong, 0); +MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3"); +module_param(board4, ulong, 0); +MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4"); +module_param(controller, ulong, 0); +MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller"); +module_param(support_low_speed, bool, 0); +MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud"); +module_param(modem1, ulong, 0); +MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem"); +module_param(modem2, ulong, 0); +MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem"); +module_param(modem3, ulong, 0); +MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem"); +module_param(modem4, ulong, 0); +MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem"); +module_param_array(pc104_1, ulong, NULL, 0); +MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,..."); +module_param_array(pc104_2, ulong, NULL, 0); +MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,..."); +module_param_array(pc104_3, ulong, NULL, 0); +MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,..."); +module_param_array(pc104_4, ulong, NULL, 0); +MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,..."); + +static int rp_init(void); +static void rp_cleanup_module(void); + +module_init(rp_init); +module_exit(rp_cleanup_module); + + +MODULE_LICENSE("Dual BSD/GPL"); + +/*************************************************************************/ +/* Module code starts here */ + +static inline int rocket_paranoia_check(struct r_port *info, + const char *routine) +{ +#ifdef ROCKET_PARANOIA_CHECK + if (!info) + return 1; + if (info->magic != RPORT_MAGIC) { + printk(KERN_WARNING "Warning: bad magic number for rocketport " + "struct in %s\n", routine); + return 1; + } +#endif + return 0; +} + + +/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals + * that receive data is present on a serial port. Pulls data from FIFO, moves it into the + * tty layer. + */ +static void rp_do_receive(struct r_port *info, + struct tty_struct *tty, + CHANNEL_t * cp, unsigned int ChanStatus) +{ + unsigned int CharNStat; + int ToRecv, wRecv, space; + unsigned char *cbuf; + + ToRecv = sGetRxCnt(cp); +#ifdef ROCKET_DEBUG_INTR + printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv); +#endif + if (ToRecv == 0) + return; + + /* + * if status indicates there are errored characters in the + * FIFO, then enter status mode (a word in FIFO holds + * character and status). + */ + if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) { + if (!(ChanStatus & STATMODE)) { +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "Entering STATMODE...\n"); +#endif + ChanStatus |= STATMODE; + sEnRxStatusMode(cp); + } + } + + /* + * if we previously entered status mode, then read down the + * FIFO one word at a time, pulling apart the character and + * the status. Update error counters depending on status + */ + if (ChanStatus & STATMODE) { +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "Ignore %x, read %x...\n", + info->ignore_status_mask, info->read_status_mask); +#endif + while (ToRecv) { + char flag; + + CharNStat = sInW(sGetTxRxDataIO(cp)); +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "%x...\n", CharNStat); +#endif + if (CharNStat & STMBREAKH) + CharNStat &= ~(STMFRAMEH | STMPARITYH); + if (CharNStat & info->ignore_status_mask) { + ToRecv--; + continue; + } + CharNStat &= info->read_status_mask; + if (CharNStat & STMBREAKH) + flag = TTY_BREAK; + else if (CharNStat & STMPARITYH) + flag = TTY_PARITY; + else if (CharNStat & STMFRAMEH) + flag = TTY_FRAME; + else if (CharNStat & STMRCVROVRH) + flag = TTY_OVERRUN; + else + flag = TTY_NORMAL; + tty_insert_flip_char(tty, CharNStat & 0xff, flag); + ToRecv--; + } + + /* + * after we've emptied the FIFO in status mode, turn + * status mode back off + */ + if (sGetRxCnt(cp) == 0) { +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "Status mode off.\n"); +#endif + sDisRxStatusMode(cp); + } + } else { + /* + * we aren't in status mode, so read down the FIFO two + * characters at time by doing repeated word IO + * transfer. + */ + space = tty_prepare_flip_string(tty, &cbuf, ToRecv); + if (space < ToRecv) { +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space); +#endif + if (space <= 0) + return; + ToRecv = space; + } + wRecv = ToRecv >> 1; + if (wRecv) + sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv); + if (ToRecv & 1) + cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp)); + } + /* Push the data up to the tty layer */ + tty_flip_buffer_push(tty); +} + +/* + * Serial port transmit data function. Called from the timer polling loop as a + * result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready + * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is + * moved to the port's xmit FIFO. *info is critical data, protected by spinlocks. + */ +static void rp_do_transmit(struct r_port *info) +{ + int c; + CHANNEL_t *cp = &info->channel; + struct tty_struct *tty; + unsigned long flags; + +#ifdef ROCKET_DEBUG_INTR + printk(KERN_DEBUG "%s\n", __func__); +#endif + if (!info) + return; + tty = tty_port_tty_get(&info->port); + + if (tty == NULL) { + printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__); + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + return; + } + + spin_lock_irqsave(&info->slock, flags); + info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); + + /* Loop sending data to FIFO until done or FIFO full */ + while (1) { + if (tty->stopped || tty->hw_stopped) + break; + c = min(info->xmit_fifo_room, info->xmit_cnt); + c = min(c, XMIT_BUF_SIZE - info->xmit_tail); + if (c <= 0 || info->xmit_fifo_room <= 0) + break; + sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2); + if (c & 1) + sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]); + info->xmit_tail += c; + info->xmit_tail &= XMIT_BUF_SIZE - 1; + info->xmit_cnt -= c; + info->xmit_fifo_room -= c; +#ifdef ROCKET_DEBUG_INTR + printk(KERN_INFO "tx %d chars...\n", c); +#endif + } + + if (info->xmit_cnt == 0) + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + + if (info->xmit_cnt < WAKEUP_CHARS) { + tty_wakeup(tty); +#ifdef ROCKETPORT_HAVE_POLL_WAIT + wake_up_interruptible(&tty->poll_wait); +#endif + } + + spin_unlock_irqrestore(&info->slock, flags); + tty_kref_put(tty); + +#ifdef ROCKET_DEBUG_INTR + printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, + info->xmit_tail, info->xmit_fifo_room); +#endif +} + +/* + * Called when a serial port signals it has read data in it's RX FIFO. + * It checks what interrupts are pending and services them, including + * receiving serial data. + */ +static void rp_handle_port(struct r_port *info) +{ + CHANNEL_t *cp; + struct tty_struct *tty; + unsigned int IntMask, ChanStatus; + + if (!info) + return; + + if ((info->port.flags & ASYNC_INITIALIZED) == 0) { + printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " + "info->flags & NOT_INIT\n"); + return; + } + tty = tty_port_tty_get(&info->port); + if (!tty) { + printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " + "tty==NULL\n"); + return; + } + cp = &info->channel; + + IntMask = sGetChanIntID(cp) & info->intmask; +#ifdef ROCKET_DEBUG_INTR + printk(KERN_INFO "rp_interrupt %02x...\n", IntMask); +#endif + ChanStatus = sGetChanStatus(cp); + if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */ + rp_do_receive(info, tty, cp, ChanStatus); + } + if (IntMask & DELTA_CD) { /* CD change */ +#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP)) + printk(KERN_INFO "ttyR%d CD now %s...\n", info->line, + (ChanStatus & CD_ACT) ? "on" : "off"); +#endif + if (!(ChanStatus & CD_ACT) && info->cd_status) { +#ifdef ROCKET_DEBUG_HANGUP + printk(KERN_INFO "CD drop, calling hangup.\n"); +#endif + tty_hangup(tty); + } + info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0; + wake_up_interruptible(&info->port.open_wait); + } +#ifdef ROCKET_DEBUG_INTR + if (IntMask & DELTA_CTS) { /* CTS change */ + printk(KERN_INFO "CTS change...\n"); + } + if (IntMask & DELTA_DSR) { /* DSR change */ + printk(KERN_INFO "DSR change...\n"); + } +#endif + tty_kref_put(tty); +} + +/* + * The top level polling routine. Repeats every 1/100 HZ (10ms). + */ +static void rp_do_poll(unsigned long dummy) +{ + CONTROLLER_t *ctlp; + int ctrl, aiop, ch, line; + unsigned int xmitmask, i; + unsigned int CtlMask; + unsigned char AiopMask; + Word_t bit; + + /* Walk through all the boards (ctrl's) */ + for (ctrl = 0; ctrl < max_board; ctrl++) { + if (rcktpt_io_addr[ctrl] <= 0) + continue; + + /* Get a ptr to the board's control struct */ + ctlp = sCtlNumToCtlPtr(ctrl); + + /* Get the interrupt status from the board */ +#ifdef CONFIG_PCI + if (ctlp->BusType == isPCI) + CtlMask = sPCIGetControllerIntStatus(ctlp); + else +#endif + CtlMask = sGetControllerIntStatus(ctlp); + + /* Check if any AIOP read bits are set */ + for (aiop = 0; CtlMask; aiop++) { + bit = ctlp->AiopIntrBits[aiop]; + if (CtlMask & bit) { + CtlMask &= ~bit; + AiopMask = sGetAiopIntStatus(ctlp, aiop); + + /* Check if any port read bits are set */ + for (ch = 0; AiopMask; AiopMask >>= 1, ch++) { + if (AiopMask & 1) { + + /* Get the line number (/dev/ttyRx number). */ + /* Read the data from the port. */ + line = GetLineNumber(ctrl, aiop, ch); + rp_handle_port(rp_table[line]); + } + } + } + } + + xmitmask = xmit_flags[ctrl]; + + /* + * xmit_flags contains bit-significant flags, indicating there is data + * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port + * 1, ... (32 total possible). The variable i has the aiop and ch + * numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc). + */ + if (xmitmask) { + for (i = 0; i < rocketModel[ctrl].numPorts; i++) { + if (xmitmask & (1 << i)) { + aiop = (i & 0x18) >> 3; + ch = i & 0x07; + line = GetLineNumber(ctrl, aiop, ch); + rp_do_transmit(rp_table[line]); + } + } + } + } + + /* + * Reset the timer so we get called at the next clock tick (10ms). + */ + if (atomic_read(&rp_num_ports_open)) + mod_timer(&rocket_timer, jiffies + POLL_PERIOD); +} + +/* + * Initializes the r_port structure for a port, as well as enabling the port on + * the board. + * Inputs: board, aiop, chan numbers + */ +static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) +{ + unsigned rocketMode; + struct r_port *info; + int line; + CONTROLLER_T *ctlp; + + /* Get the next available line number */ + line = SetLineNumber(board, aiop, chan); + + ctlp = sCtlNumToCtlPtr(board); + + /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */ + info = kzalloc(sizeof (struct r_port), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "Couldn't allocate info struct for line #%d\n", + line); + return; + } + + info->magic = RPORT_MAGIC; + info->line = line; + info->ctlp = ctlp; + info->board = board; + info->aiop = aiop; + info->chan = chan; + tty_port_init(&info->port); + info->port.ops = &rocket_port_ops; + init_completion(&info->close_wait); + info->flags &= ~ROCKET_MODE_MASK; + switch (pc104[board][line]) { + case 422: + info->flags |= ROCKET_MODE_RS422; + break; + case 485: + info->flags |= ROCKET_MODE_RS485; + break; + case 232: + default: + info->flags |= ROCKET_MODE_RS232; + break; + } + + info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR; + if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) { + printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n", + board, aiop, chan); + kfree(info); + return; + } + + rocketMode = info->flags & ROCKET_MODE_MASK; + + if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485)) + sEnRTSToggle(&info->channel); + else + sDisRTSToggle(&info->channel); + + if (ctlp->boardType == ROCKET_TYPE_PC104) { + switch (rocketMode) { + case ROCKET_MODE_RS485: + sSetInterfaceMode(&info->channel, InterfaceModeRS485); + break; + case ROCKET_MODE_RS422: + sSetInterfaceMode(&info->channel, InterfaceModeRS422); + break; + case ROCKET_MODE_RS232: + default: + if (info->flags & ROCKET_RTS_TOGGLE) + sSetInterfaceMode(&info->channel, InterfaceModeRS232T); + else + sSetInterfaceMode(&info->channel, InterfaceModeRS232); + break; + } + } + spin_lock_init(&info->slock); + mutex_init(&info->write_mtx); + rp_table[line] = info; + tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev : + NULL); +} + +/* + * Configures a rocketport port according to its termio settings. Called from + * user mode into the driver (exception handler). *info CD manipulation is spinlock protected. + */ +static void configure_r_port(struct tty_struct *tty, struct r_port *info, + struct ktermios *old_termios) +{ + unsigned cflag; + unsigned long flags; + unsigned rocketMode; + int bits, baud, divisor; + CHANNEL_t *cp; + struct ktermios *t = tty->termios; + + cp = &info->channel; + cflag = t->c_cflag; + + /* Byte size and parity */ + if ((cflag & CSIZE) == CS8) { + sSetData8(cp); + bits = 10; + } else { + sSetData7(cp); + bits = 9; + } + if (cflag & CSTOPB) { + sSetStop2(cp); + bits++; + } else { + sSetStop1(cp); + } + + if (cflag & PARENB) { + sEnParity(cp); + bits++; + if (cflag & PARODD) { + sSetOddParity(cp); + } else { + sSetEvenParity(cp); + } + } else { + sDisParity(cp); + } + + /* baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1; + if ((divisor >= 8192 || divisor < 0) && old_termios) { + baud = tty_termios_baud_rate(old_termios); + if (!baud) + baud = 9600; + divisor = (rp_baud_base[info->board] / baud) - 1; + } + if (divisor >= 8192 || divisor < 0) { + baud = 9600; + divisor = (rp_baud_base[info->board] / baud) - 1; + } + info->cps = baud / bits; + sSetBaud(cp, divisor); + + /* FIXME: Should really back compute a baud rate from the divisor */ + tty_encode_baud_rate(tty, baud, baud); + + if (cflag & CRTSCTS) { + info->intmask |= DELTA_CTS; + sEnCTSFlowCtl(cp); + } else { + info->intmask &= ~DELTA_CTS; + sDisCTSFlowCtl(cp); + } + if (cflag & CLOCAL) { + info->intmask &= ~DELTA_CD; + } else { + spin_lock_irqsave(&info->slock, flags); + if (sGetChanStatus(cp) & CD_ACT) + info->cd_status = 1; + else + info->cd_status = 0; + info->intmask |= DELTA_CD; + spin_unlock_irqrestore(&info->slock, flags); + } + + /* + * Handle software flow control in the board + */ +#ifdef ROCKET_SOFT_FLOW + if (I_IXON(tty)) { + sEnTxSoftFlowCtl(cp); + if (I_IXANY(tty)) { + sEnIXANY(cp); + } else { + sDisIXANY(cp); + } + sSetTxXONChar(cp, START_CHAR(tty)); + sSetTxXOFFChar(cp, STOP_CHAR(tty)); + } else { + sDisTxSoftFlowCtl(cp); + sDisIXANY(cp); + sClrTxXOFF(cp); + } +#endif + + /* + * Set up ignore/read mask words + */ + info->read_status_mask = STMRCVROVRH | 0xFF; + if (I_INPCK(tty)) + info->read_status_mask |= STMFRAMEH | STMPARITYH; + if (I_BRKINT(tty) || I_PARMRK(tty)) + info->read_status_mask |= STMBREAKH; + + /* + * Characters to ignore + */ + info->ignore_status_mask = 0; + if (I_IGNPAR(tty)) + info->ignore_status_mask |= STMFRAMEH | STMPARITYH; + if (I_IGNBRK(tty)) { + info->ignore_status_mask |= STMBREAKH; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too. (For real raw support). + */ + if (I_IGNPAR(tty)) + info->ignore_status_mask |= STMRCVROVRH; + } + + rocketMode = info->flags & ROCKET_MODE_MASK; + + if ((info->flags & ROCKET_RTS_TOGGLE) + || (rocketMode == ROCKET_MODE_RS485)) + sEnRTSToggle(cp); + else + sDisRTSToggle(cp); + + sSetRTS(&info->channel); + + if (cp->CtlP->boardType == ROCKET_TYPE_PC104) { + switch (rocketMode) { + case ROCKET_MODE_RS485: + sSetInterfaceMode(cp, InterfaceModeRS485); + break; + case ROCKET_MODE_RS422: + sSetInterfaceMode(cp, InterfaceModeRS422); + break; + case ROCKET_MODE_RS232: + default: + if (info->flags & ROCKET_RTS_TOGGLE) + sSetInterfaceMode(cp, InterfaceModeRS232T); + else + sSetInterfaceMode(cp, InterfaceModeRS232); + break; + } + } +} + +static int carrier_raised(struct tty_port *port) +{ + struct r_port *info = container_of(port, struct r_port, port); + return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; +} + +static void dtr_rts(struct tty_port *port, int on) +{ + struct r_port *info = container_of(port, struct r_port, port); + if (on) { + sSetDTR(&info->channel); + sSetRTS(&info->channel); + } else { + sClrDTR(&info->channel); + sClrRTS(&info->channel); + } +} + +/* + * Exception handler that opens a serial port. Creates xmit_buf storage, fills in + * port's r_port struct. Initializes the port hardware. + */ +static int rp_open(struct tty_struct *tty, struct file *filp) +{ + struct r_port *info; + struct tty_port *port; + int line = 0, retval; + CHANNEL_t *cp; + unsigned long page; + + line = tty->index; + if (line < 0 || line >= MAX_RP_PORTS || ((info = rp_table[line]) == NULL)) + return -ENXIO; + port = &info->port; + + page = __get_free_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + if (port->flags & ASYNC_CLOSING) { + retval = wait_for_completion_interruptible(&info->close_wait); + free_page(page); + if (retval) + return retval; + return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); + } + + /* + * We must not sleep from here until the port is marked fully in use. + */ + if (info->xmit_buf) + free_page(page); + else + info->xmit_buf = (unsigned char *) page; + + tty->driver_data = info; + tty_port_tty_set(port, tty); + + if (port->count++ == 0) { + atomic_inc(&rp_num_ports_open); + +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rocket mod++ = %d...\n", + atomic_read(&rp_num_ports_open)); +#endif + } +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count); +#endif + + /* + * Info->count is now 1; so it's safe to sleep now. + */ + if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) { + cp = &info->channel; + sSetRxTrigger(cp, TRIG_1); + if (sGetChanStatus(cp) & CD_ACT) + info->cd_status = 1; + else + info->cd_status = 0; + sDisRxStatusMode(cp); + sFlushRxFIFO(cp); + sFlushTxFIFO(cp); + + sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); + sSetRxTrigger(cp, TRIG_1); + + sGetChanStatus(cp); + sDisRxStatusMode(cp); + sClrTxXOFF(cp); + + sDisCTSFlowCtl(cp); + sDisTxSoftFlowCtl(cp); + + sEnRxFIFO(cp); + sEnTransmit(cp); + + set_bit(ASYNCB_INITIALIZED, &info->port.flags); + + /* + * Set up the tty->alt_speed kludge + */ + if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) + tty->alt_speed = 57600; + if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) + tty->alt_speed = 115200; + if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) + tty->alt_speed = 230400; + if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) + tty->alt_speed = 460800; + + configure_r_port(tty, info, NULL); + if (tty->termios->c_cflag & CBAUD) { + sSetDTR(cp); + sSetRTS(cp); + } + } + /* Starts (or resets) the maint polling loop */ + mod_timer(&rocket_timer, jiffies + POLL_PERIOD); + + retval = tty_port_block_til_ready(port, tty, filp); + if (retval) { +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval); +#endif + return retval; + } + return 0; +} + +/* + * Exception handler that closes a serial port. info->port.count is considered critical. + */ +static void rp_close(struct tty_struct *tty, struct file *filp) +{ + struct r_port *info = tty->driver_data; + struct tty_port *port = &info->port; + int timeout; + CHANNEL_t *cp; + + if (rocket_paranoia_check(info, "rp_close")) + return; + +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count); +#endif + + if (tty_port_close_start(port, tty, filp) == 0) + return; + + mutex_lock(&port->mutex); + cp = &info->channel; + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps; + if (timeout == 0) + timeout = 1; + rp_wait_until_sent(tty, timeout); + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + + sDisTransmit(cp); + sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); + sDisCTSFlowCtl(cp); + sDisTxSoftFlowCtl(cp); + sClrTxXOFF(cp); + sFlushRxFIFO(cp); + sFlushTxFIFO(cp); + sClrRTS(cp); + if (C_HUPCL(tty)) + sClrDTR(cp); + + rp_flush_buffer(tty); + + tty_ldisc_flush(tty); + + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + + /* We can't yet use tty_port_close_end as the buffer handling in this + driver is a bit different to the usual */ + + if (port->blocked_open) { + if (port->close_delay) { + msleep_interruptible(jiffies_to_msecs(port->close_delay)); + } + wake_up_interruptible(&port->open_wait); + } else { + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = NULL; + } + } + spin_lock_irq(&port->lock); + info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE); + tty->closing = 0; + spin_unlock_irq(&port->lock); + mutex_unlock(&port->mutex); + tty_port_tty_set(port, NULL); + + wake_up_interruptible(&port->close_wait); + complete_all(&info->close_wait); + atomic_dec(&rp_num_ports_open); + +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rocket mod-- = %d...\n", + atomic_read(&rp_num_ports_open)); + printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line); +#endif + +} + +static void rp_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + unsigned cflag; + + if (rocket_paranoia_check(info, "rp_set_termios")) + return; + + cflag = tty->termios->c_cflag; + + /* + * This driver doesn't support CS5 or CS6 + */ + if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6)) + tty->termios->c_cflag = + ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE)); + /* Or CMSPAR */ + tty->termios->c_cflag &= ~CMSPAR; + + configure_r_port(tty, info, old_termios); + + cp = &info->channel; + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) { + sClrDTR(cp); + sClrRTS(cp); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) { + if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS)) + sSetRTS(cp); + sSetDTR(cp); + } + + if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rp_start(tty); + } +} + +static int rp_break(struct tty_struct *tty, int break_state) +{ + struct r_port *info = tty->driver_data; + unsigned long flags; + + if (rocket_paranoia_check(info, "rp_break")) + return -EINVAL; + + spin_lock_irqsave(&info->slock, flags); + if (break_state == -1) + sSendBreak(&info->channel); + else + sClrBreak(&info->channel); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +/* + * sGetChanRI used to be a macro in rocket_int.h. When the functionality for + * the UPCI boards was added, it was decided to make this a function because + * the macro was getting too complicated. All cases except the first one + * (UPCIRingInd) are taken directly from the original macro. + */ +static int sGetChanRI(CHANNEL_T * ChP) +{ + CONTROLLER_t *CtlP = ChP->CtlP; + int ChanNum = ChP->ChanNum; + int RingInd = 0; + + if (CtlP->UPCIRingInd) + RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]); + else if (CtlP->AltChanRingIndicator) + RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT; + else if (CtlP->boardType == ROCKET_TYPE_PC104) + RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]); + + return RingInd; +} + +/********************************************************************************************/ +/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */ + +/* + * Returns the state of the serial modem control lines. These next 2 functions + * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs. + */ +static int rp_tiocmget(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + unsigned int control, result, ChanStatus; + + ChanStatus = sGetChanStatusLo(&info->channel); + control = info->channel.TxControl[3]; + result = ((control & SET_RTS) ? TIOCM_RTS : 0) | + ((control & SET_DTR) ? TIOCM_DTR : 0) | + ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) | + (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) | + ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) | + ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0); + + return result; +} + +/* + * Sets the modem control lines + */ +static int rp_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct r_port *info = tty->driver_data; + + if (set & TIOCM_RTS) + info->channel.TxControl[3] |= SET_RTS; + if (set & TIOCM_DTR) + info->channel.TxControl[3] |= SET_DTR; + if (clear & TIOCM_RTS) + info->channel.TxControl[3] &= ~SET_RTS; + if (clear & TIOCM_DTR) + info->channel.TxControl[3] &= ~SET_DTR; + + out32(info->channel.IndexAddr, info->channel.TxControl); + return 0; +} + +static int get_config(struct r_port *info, struct rocket_config __user *retinfo) +{ + struct rocket_config tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof (tmp)); + mutex_lock(&info->port.mutex); + tmp.line = info->line; + tmp.flags = info->flags; + tmp.close_delay = info->port.close_delay; + tmp.closing_wait = info->port.closing_wait; + tmp.port = rcktpt_io_addr[(info->line >> 5) & 3]; + mutex_unlock(&info->port.mutex); + + if (copy_to_user(retinfo, &tmp, sizeof (*retinfo))) + return -EFAULT; + return 0; +} + +static int set_config(struct tty_struct *tty, struct r_port *info, + struct rocket_config __user *new_info) +{ + struct rocket_config new_serial; + + if (copy_from_user(&new_serial, new_info, sizeof (new_serial))) + return -EFAULT; + + mutex_lock(&info->port.mutex); + if (!capable(CAP_SYS_ADMIN)) + { + if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) { + mutex_unlock(&info->port.mutex); + return -EPERM; + } + info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); + configure_r_port(tty, info, NULL); + mutex_unlock(&info->port.mutex); + return 0; + } + + info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS)); + info->port.close_delay = new_serial.close_delay; + info->port.closing_wait = new_serial.closing_wait; + + if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) + tty->alt_speed = 57600; + if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) + tty->alt_speed = 115200; + if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) + tty->alt_speed = 230400; + if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) + tty->alt_speed = 460800; + mutex_unlock(&info->port.mutex); + + configure_r_port(tty, info, NULL); + return 0; +} + +/* + * This function fills in a rocket_ports struct with information + * about what boards/ports are in the system. This info is passed + * to user space. See setrocket.c where the info is used to create + * the /dev/ttyRx ports. + */ +static int get_ports(struct r_port *info, struct rocket_ports __user *retports) +{ + struct rocket_ports tmp; + int board; + + if (!retports) + return -EFAULT; + memset(&tmp, 0, sizeof (tmp)); + tmp.tty_major = rocket_driver->major; + + for (board = 0; board < 4; board++) { + tmp.rocketModel[board].model = rocketModel[board].model; + strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString); + tmp.rocketModel[board].numPorts = rocketModel[board].numPorts; + tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2; + tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber; + } + if (copy_to_user(retports, &tmp, sizeof (*retports))) + return -EFAULT; + return 0; +} + +static int reset_rm2(struct r_port *info, void __user *arg) +{ + int reset; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (copy_from_user(&reset, arg, sizeof (int))) + return -EFAULT; + if (reset) + reset = 1; + + if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII && + rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII) + return -EINVAL; + + if (info->ctlp->BusType == isISA) + sModemReset(info->ctlp, info->chan, reset); + else + sPCIModemReset(info->ctlp, info->chan, reset); + + return 0; +} + +static int get_version(struct r_port *info, struct rocket_version __user *retvers) +{ + if (copy_to_user(retvers, &driver_version, sizeof (*retvers))) + return -EFAULT; + return 0; +} + +/* IOCTL call handler into the driver */ +static int rp_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct r_port *info = tty->driver_data; + void __user *argp = (void __user *)arg; + int ret = 0; + + if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl")) + return -ENXIO; + + switch (cmd) { + case RCKP_GET_STRUCT: + if (copy_to_user(argp, info, sizeof (struct r_port))) + ret = -EFAULT; + break; + case RCKP_GET_CONFIG: + ret = get_config(info, argp); + break; + case RCKP_SET_CONFIG: + ret = set_config(tty, info, argp); + break; + case RCKP_GET_PORTS: + ret = get_ports(info, argp); + break; + case RCKP_RESET_RM2: + ret = reset_rm2(info, argp); + break; + case RCKP_GET_VERSION: + ret = get_version(info, argp); + break; + default: + ret = -ENOIOCTLCMD; + } + return ret; +} + +static void rp_send_xchar(struct tty_struct *tty, char ch) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + + if (rocket_paranoia_check(info, "rp_send_xchar")) + return; + + cp = &info->channel; + if (sGetTxCnt(cp)) + sWriteTxPrioByte(cp, ch); + else + sWriteTxByte(sGetTxRxDataIO(cp), ch); +} + +static void rp_throttle(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + +#ifdef ROCKET_DEBUG_THROTTLE + printk(KERN_INFO "throttle %s: %d....\n", tty->name, + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (rocket_paranoia_check(info, "rp_throttle")) + return; + + cp = &info->channel; + if (I_IXOFF(tty)) + rp_send_xchar(tty, STOP_CHAR(tty)); + + sClrRTS(&info->channel); +} + +static void rp_unthrottle(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; +#ifdef ROCKET_DEBUG_THROTTLE + printk(KERN_INFO "unthrottle %s: %d....\n", tty->name, + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (rocket_paranoia_check(info, "rp_throttle")) + return; + + cp = &info->channel; + if (I_IXOFF(tty)) + rp_send_xchar(tty, START_CHAR(tty)); + + sSetRTS(&info->channel); +} + +/* + * ------------------------------------------------------------ + * rp_stop() and rp_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rp_stop(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + +#ifdef ROCKET_DEBUG_FLOW + printk(KERN_INFO "stop %s: %d %d....\n", tty->name, + info->xmit_cnt, info->xmit_fifo_room); +#endif + + if (rocket_paranoia_check(info, "rp_stop")) + return; + + if (sGetTxCnt(&info->channel)) + sDisTransmit(&info->channel); +} + +static void rp_start(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + +#ifdef ROCKET_DEBUG_FLOW + printk(KERN_INFO "start %s: %d %d....\n", tty->name, + info->xmit_cnt, info->xmit_fifo_room); +#endif + + if (rocket_paranoia_check(info, "rp_stop")) + return; + + sEnTransmit(&info->channel); + set_bit((info->aiop * 8) + info->chan, + (void *) &xmit_flags[info->board]); +} + +/* + * rp_wait_until_sent() --- wait until the transmitter is empty + */ +static void rp_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + unsigned long orig_jiffies; + int check_time, exit_time; + int txcnt; + + if (rocket_paranoia_check(info, "rp_wait_until_sent")) + return; + + cp = &info->channel; + + orig_jiffies = jiffies; +#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT + printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...\n", timeout, + jiffies); + printk(KERN_INFO "cps=%d...\n", info->cps); +#endif + while (1) { + txcnt = sGetTxCnt(cp); + if (!txcnt) { + if (sGetChanStatusLo(cp) & TXSHRMT) + break; + check_time = (HZ / info->cps) / 5; + } else { + check_time = HZ * txcnt / info->cps; + } + if (timeout) { + exit_time = orig_jiffies + timeout - jiffies; + if (exit_time <= 0) + break; + if (exit_time < check_time) + check_time = exit_time; + } + if (check_time == 0) + check_time = 1; +#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT + printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt, + jiffies, check_time); +#endif + msleep_interruptible(jiffies_to_msecs(check_time)); + if (signal_pending(current)) + break; + } + __set_current_state(TASK_RUNNING); +#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT + printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies); +#endif +} + +/* + * rp_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rp_hangup(struct tty_struct *tty) +{ + CHANNEL_t *cp; + struct r_port *info = tty->driver_data; + unsigned long flags; + + if (rocket_paranoia_check(info, "rp_hangup")) + return; + +#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP)) + printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); +#endif + rp_flush_buffer(tty); + spin_lock_irqsave(&info->port.lock, flags); + if (info->port.flags & ASYNC_CLOSING) { + spin_unlock_irqrestore(&info->port.lock, flags); + return; + } + if (info->port.count) + atomic_dec(&rp_num_ports_open); + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + spin_unlock_irqrestore(&info->port.lock, flags); + + tty_port_hangup(&info->port); + + cp = &info->channel; + sDisRxFIFO(cp); + sDisTransmit(cp); + sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); + sDisCTSFlowCtl(cp); + sDisTxSoftFlowCtl(cp); + sClrTxXOFF(cp); + clear_bit(ASYNCB_INITIALIZED, &info->port.flags); + + wake_up_interruptible(&info->port.open_wait); +} + +/* + * Exception handler - write char routine. The RocketPort driver uses a + * double-buffering strategy, with the twist that if the in-memory CPU + * buffer is empty, and there's space in the transmit FIFO, the + * writing routines will write directly to transmit FIFO. + * Write buffer and counters protected by spinlocks + */ +static int rp_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + unsigned long flags; + + if (rocket_paranoia_check(info, "rp_put_char")) + return 0; + + /* + * Grab the port write mutex, locking out other processes that try to + * write to this port + */ + mutex_lock(&info->write_mtx); + +#ifdef ROCKET_DEBUG_WRITE + printk(KERN_INFO "rp_put_char %c...\n", ch); +#endif + + spin_lock_irqsave(&info->slock, flags); + cp = &info->channel; + + if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0) + info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); + + if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) { + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= XMIT_BUF_SIZE - 1; + info->xmit_cnt++; + set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + } else { + sOutB(sGetTxRxDataIO(cp), ch); + info->xmit_fifo_room--; + } + spin_unlock_irqrestore(&info->slock, flags); + mutex_unlock(&info->write_mtx); + return 1; +} + +/* + * Exception handler - write routine, called when user app writes to the device. + * A per port write mutex is used to protect from another process writing to + * this port at the same time. This other process could be running on the other CPU + * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out). + * Spinlocks protect the info xmit members. + */ +static int rp_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + const unsigned char *b; + int c, retval = 0; + unsigned long flags; + + if (count <= 0 || rocket_paranoia_check(info, "rp_write")) + return 0; + + if (mutex_lock_interruptible(&info->write_mtx)) + return -ERESTARTSYS; + +#ifdef ROCKET_DEBUG_WRITE + printk(KERN_INFO "rp_write %d chars...\n", count); +#endif + cp = &info->channel; + + if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count) + info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); + + /* + * If the write queue for the port is empty, and there is FIFO space, stuff bytes + * into FIFO. Use the write queue for temp storage. + */ + if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) { + c = min(count, info->xmit_fifo_room); + b = buf; + + /* Push data into FIFO, 2 bytes at a time */ + sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2); + + /* If there is a byte remaining, write it */ + if (c & 1) + sOutB(sGetTxRxDataIO(cp), b[c - 1]); + + retval += c; + buf += c; + count -= c; + + spin_lock_irqsave(&info->slock, flags); + info->xmit_fifo_room -= c; + spin_unlock_irqrestore(&info->slock, flags); + } + + /* If count is zero, we wrote it all and are done */ + if (!count) + goto end; + + /* Write remaining data into the port's xmit_buf */ + while (1) { + /* Hung up ? */ + if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags)) + goto end; + c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); + c = min(c, XMIT_BUF_SIZE - info->xmit_head); + if (c <= 0) + break; + + b = buf; + memcpy(info->xmit_buf + info->xmit_head, b, c); + + spin_lock_irqsave(&info->slock, flags); + info->xmit_head = + (info->xmit_head + c) & (XMIT_BUF_SIZE - 1); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->slock, flags); + + buf += c; + count -= c; + retval += c; + } + + if ((retval > 0) && !tty->stopped && !tty->hw_stopped) + set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + +end: + if (info->xmit_cnt < WAKEUP_CHARS) { + tty_wakeup(tty); +#ifdef ROCKETPORT_HAVE_POLL_WAIT + wake_up_interruptible(&tty->poll_wait); +#endif + } + mutex_unlock(&info->write_mtx); + return retval; +} + +/* + * Return the number of characters that can be sent. We estimate + * only using the in-memory transmit buffer only, and ignore the + * potential space in the transmit FIFO. + */ +static int rp_write_room(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + int ret; + + if (rocket_paranoia_check(info, "rp_write_room")) + return 0; + + ret = XMIT_BUF_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; +#ifdef ROCKET_DEBUG_WRITE + printk(KERN_INFO "rp_write_room returns %d...\n", ret); +#endif + return ret; +} + +/* + * Return the number of characters in the buffer. Again, this only + * counts those characters in the in-memory transmit buffer. + */ +static int rp_chars_in_buffer(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + + if (rocket_paranoia_check(info, "rp_chars_in_buffer")) + return 0; + + cp = &info->channel; + +#ifdef ROCKET_DEBUG_WRITE + printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt); +#endif + return info->xmit_cnt; +} + +/* + * Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the + * r_port struct for the port. Note that spinlock are used to protect info members, + * do not call this function if the spinlock is already held. + */ +static void rp_flush_buffer(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + unsigned long flags; + + if (rocket_paranoia_check(info, "rp_flush_buffer")) + return; + + spin_lock_irqsave(&info->slock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + spin_unlock_irqrestore(&info->slock, flags); + +#ifdef ROCKETPORT_HAVE_POLL_WAIT + wake_up_interruptible(&tty->poll_wait); +#endif + tty_wakeup(tty); + + cp = &info->channel; + sFlushTxFIFO(cp); +} + +#ifdef CONFIG_PCI + +static struct pci_device_id __devinitdata __used rocket_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) }, + { } +}; +MODULE_DEVICE_TABLE(pci, rocket_pci_ids); + +/* + * Called when a PCI card is found. Retrieves and stores model information, + * init's aiopic and serial port hardware. + * Inputs: i is the board number (0-n) + */ +static __init int register_PCI(int i, struct pci_dev *dev) +{ + int num_aiops, aiop, max_num_aiops, num_chan, chan; + unsigned int aiopio[MAX_AIOPS_PER_BOARD]; + char *str, *board_type; + CONTROLLER_t *ctlp; + + int fast_clock = 0; + int altChanRingIndicator = 0; + int ports_per_aiop = 8; + WordIO_t ConfigIO = 0; + ByteIO_t UPCIRingInd = 0; + + if (!dev || pci_enable_device(dev)) + return 0; + + rcktpt_io_addr[i] = pci_resource_start(dev, 0); + + rcktpt_type[i] = ROCKET_TYPE_NORMAL; + rocketModel[i].loadrm2 = 0; + rocketModel[i].startingPortNumber = nextLineNumber; + + /* Depending on the model, set up some config variables */ + switch (dev->device) { + case PCI_DEVICE_ID_RP4QUAD: + str = "Quadcable"; + max_num_aiops = 1; + ports_per_aiop = 4; + rocketModel[i].model = MODEL_RP4QUAD; + strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable"); + rocketModel[i].numPorts = 4; + break; + case PCI_DEVICE_ID_RP8OCTA: + str = "Octacable"; + max_num_aiops = 1; + rocketModel[i].model = MODEL_RP8OCTA; + strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_URP8OCTA: + str = "Octacable"; + max_num_aiops = 1; + rocketModel[i].model = MODEL_UPCI_RP8OCTA; + strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP8INTF: + str = "8"; + max_num_aiops = 1; + rocketModel[i].model = MODEL_RP8INTF; + strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_URP8INTF: + str = "8"; + max_num_aiops = 1; + rocketModel[i].model = MODEL_UPCI_RP8INTF; + strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP8J: + str = "8J"; + max_num_aiops = 1; + rocketModel[i].model = MODEL_RP8J; + strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP4J: + str = "4J"; + max_num_aiops = 1; + ports_per_aiop = 4; + rocketModel[i].model = MODEL_RP4J; + strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors"); + rocketModel[i].numPorts = 4; + break; + case PCI_DEVICE_ID_RP8SNI: + str = "8 (DB78 Custom)"; + max_num_aiops = 1; + rocketModel[i].model = MODEL_RP8SNI; + strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP16SNI: + str = "16 (DB78 Custom)"; + max_num_aiops = 2; + rocketModel[i].model = MODEL_RP16SNI; + strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78"); + rocketModel[i].numPorts = 16; + break; + case PCI_DEVICE_ID_RP16INTF: + str = "16"; + max_num_aiops = 2; + rocketModel[i].model = MODEL_RP16INTF; + strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F"); + rocketModel[i].numPorts = 16; + break; + case PCI_DEVICE_ID_URP16INTF: + str = "16"; + max_num_aiops = 2; + rocketModel[i].model = MODEL_UPCI_RP16INTF; + strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F"); + rocketModel[i].numPorts = 16; + break; + case PCI_DEVICE_ID_CRP16INTF: + str = "16"; + max_num_aiops = 2; + rocketModel[i].model = MODEL_CPCI_RP16INTF; + strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F"); + rocketModel[i].numPorts = 16; + break; + case PCI_DEVICE_ID_RP32INTF: + str = "32"; + max_num_aiops = 4; + rocketModel[i].model = MODEL_RP32INTF; + strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F"); + rocketModel[i].numPorts = 32; + break; + case PCI_DEVICE_ID_URP32INTF: + str = "32"; + max_num_aiops = 4; + rocketModel[i].model = MODEL_UPCI_RP32INTF; + strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F"); + rocketModel[i].numPorts = 32; + break; + case PCI_DEVICE_ID_RPP4: + str = "Plus Quadcable"; + max_num_aiops = 1; + ports_per_aiop = 4; + altChanRingIndicator++; + fast_clock++; + rocketModel[i].model = MODEL_RPP4; + strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port"); + rocketModel[i].numPorts = 4; + break; + case PCI_DEVICE_ID_RPP8: + str = "Plus Octacable"; + max_num_aiops = 2; + ports_per_aiop = 4; + altChanRingIndicator++; + fast_clock++; + rocketModel[i].model = MODEL_RPP8; + strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP2_232: + str = "Plus 2 (RS-232)"; + max_num_aiops = 1; + ports_per_aiop = 2; + altChanRingIndicator++; + fast_clock++; + rocketModel[i].model = MODEL_RP2_232; + strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232"); + rocketModel[i].numPorts = 2; + break; + case PCI_DEVICE_ID_RP2_422: + str = "Plus 2 (RS-422)"; + max_num_aiops = 1; + ports_per_aiop = 2; + altChanRingIndicator++; + fast_clock++; + rocketModel[i].model = MODEL_RP2_422; + strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422"); + rocketModel[i].numPorts = 2; + break; + case PCI_DEVICE_ID_RP6M: + + max_num_aiops = 1; + ports_per_aiop = 6; + str = "6-port"; + + /* If revision is 1, the rocketmodem flash must be loaded. + * If it is 2 it is a "socketed" version. */ + if (dev->revision == 1) { + rcktpt_type[i] = ROCKET_TYPE_MODEMII; + rocketModel[i].loadrm2 = 1; + } else { + rcktpt_type[i] = ROCKET_TYPE_MODEM; + } + + rocketModel[i].model = MODEL_RP6M; + strcpy(rocketModel[i].modelString, "RocketModem 6 port"); + rocketModel[i].numPorts = 6; + break; + case PCI_DEVICE_ID_RP4M: + max_num_aiops = 1; + ports_per_aiop = 4; + str = "4-port"; + if (dev->revision == 1) { + rcktpt_type[i] = ROCKET_TYPE_MODEMII; + rocketModel[i].loadrm2 = 1; + } else { + rcktpt_type[i] = ROCKET_TYPE_MODEM; + } + + rocketModel[i].model = MODEL_RP4M; + strcpy(rocketModel[i].modelString, "RocketModem 4 port"); + rocketModel[i].numPorts = 4; + break; + default: + str = "(unknown/unsupported)"; + max_num_aiops = 0; + break; + } + + /* + * Check for UPCI boards. + */ + + switch (dev->device) { + case PCI_DEVICE_ID_URP32INTF: + case PCI_DEVICE_ID_URP8INTF: + case PCI_DEVICE_ID_URP16INTF: + case PCI_DEVICE_ID_CRP16INTF: + case PCI_DEVICE_ID_URP8OCTA: + rcktpt_io_addr[i] = pci_resource_start(dev, 2); + ConfigIO = pci_resource_start(dev, 1); + if (dev->device == PCI_DEVICE_ID_URP8OCTA) { + UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; + + /* + * Check for octa or quad cable. + */ + if (! + (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) & + PCI_GPIO_CTRL_8PORT)) { + str = "Quadcable"; + ports_per_aiop = 4; + rocketModel[i].numPorts = 4; + } + } + break; + case PCI_DEVICE_ID_UPCI_RM3_8PORT: + str = "8 ports"; + max_num_aiops = 1; + rocketModel[i].model = MODEL_UPCI_RM3_8PORT; + strcpy(rocketModel[i].modelString, "RocketModem III 8 port"); + rocketModel[i].numPorts = 8; + rcktpt_io_addr[i] = pci_resource_start(dev, 2); + UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; + ConfigIO = pci_resource_start(dev, 1); + rcktpt_type[i] = ROCKET_TYPE_MODEMIII; + break; + case PCI_DEVICE_ID_UPCI_RM3_4PORT: + str = "4 ports"; + max_num_aiops = 1; + rocketModel[i].model = MODEL_UPCI_RM3_4PORT; + strcpy(rocketModel[i].modelString, "RocketModem III 4 port"); + rocketModel[i].numPorts = 4; + rcktpt_io_addr[i] = pci_resource_start(dev, 2); + UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; + ConfigIO = pci_resource_start(dev, 1); + rcktpt_type[i] = ROCKET_TYPE_MODEMIII; + break; + default: + break; + } + + switch (rcktpt_type[i]) { + case ROCKET_TYPE_MODEM: + board_type = "RocketModem"; + break; + case ROCKET_TYPE_MODEMII: + board_type = "RocketModem II"; + break; + case ROCKET_TYPE_MODEMIII: + board_type = "RocketModem III"; + break; + default: + board_type = "RocketPort"; + break; + } + + if (fast_clock) { + sClockPrescale = 0x12; /* mod 2 (divide by 3) */ + rp_baud_base[i] = 921600; + } else { + /* + * If support_low_speed is set, use the slow clock + * prescale, which supports 50 bps + */ + if (support_low_speed) { + /* mod 9 (divide by 10) prescale */ + sClockPrescale = 0x19; + rp_baud_base[i] = 230400; + } else { + /* mod 4 (devide by 5) prescale */ + sClockPrescale = 0x14; + rp_baud_base[i] = 460800; + } + } + + for (aiop = 0; aiop < max_num_aiops; aiop++) + aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40); + ctlp = sCtlNumToCtlPtr(i); + num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd); + for (aiop = 0; aiop < max_num_aiops; aiop++) + ctlp->AiopNumChan[aiop] = ports_per_aiop; + + dev_info(&dev->dev, "comtrol PCI controller #%d found at " + "address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n", + i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString, + rocketModel[i].startingPortNumber, + rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1); + + if (num_aiops <= 0) { + rcktpt_io_addr[i] = 0; + return (0); + } + is_PCI[i] = 1; + + /* Reset the AIOPIC, init the serial ports */ + for (aiop = 0; aiop < num_aiops; aiop++) { + sResetAiopByNum(ctlp, aiop); + num_chan = ports_per_aiop; + for (chan = 0; chan < num_chan; chan++) + init_r_port(i, aiop, chan, dev); + } + + /* Rocket modems must be reset */ + if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || + (rcktpt_type[i] == ROCKET_TYPE_MODEMII) || + (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) { + num_chan = ports_per_aiop; + for (chan = 0; chan < num_chan; chan++) + sPCIModemReset(ctlp, chan, 1); + msleep(500); + for (chan = 0; chan < num_chan; chan++) + sPCIModemReset(ctlp, chan, 0); + msleep(500); + rmSpeakerReset(ctlp, rocketModel[i].model); + } + return (1); +} + +/* + * Probes for PCI cards, inits them if found + * Input: board_found = number of ISA boards already found, or the + * starting board number + * Returns: Number of PCI boards found + */ +static int __init init_PCI(int boards_found) +{ + struct pci_dev *dev = NULL; + int count = 0; + + /* Work through the PCI device list, pulling out ours */ + while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) { + if (register_PCI(count + boards_found, dev)) + count++; + } + return (count); +} + +#endif /* CONFIG_PCI */ + +/* + * Probes for ISA cards + * Input: i = the board number to look for + * Returns: 1 if board found, 0 else + */ +static int __init init_ISA(int i) +{ + int num_aiops, num_chan = 0, total_num_chan = 0; + int aiop, chan; + unsigned int aiopio[MAX_AIOPS_PER_BOARD]; + CONTROLLER_t *ctlp; + char *type_string; + + /* If io_addr is zero, no board configured */ + if (rcktpt_io_addr[i] == 0) + return (0); + + /* Reserve the IO region */ + if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) { + printk(KERN_ERR "Unable to reserve IO region for configured " + "ISA RocketPort at address 0x%lx, board not " + "installed...\n", rcktpt_io_addr[i]); + rcktpt_io_addr[i] = 0; + return (0); + } + + ctlp = sCtlNumToCtlPtr(i); + + ctlp->boardType = rcktpt_type[i]; + + switch (rcktpt_type[i]) { + case ROCKET_TYPE_PC104: + type_string = "(PC104)"; + break; + case ROCKET_TYPE_MODEM: + type_string = "(RocketModem)"; + break; + case ROCKET_TYPE_MODEMII: + type_string = "(RocketModem II)"; + break; + default: + type_string = ""; + break; + } + + /* + * If support_low_speed is set, use the slow clock prescale, + * which supports 50 bps + */ + if (support_low_speed) { + sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */ + rp_baud_base[i] = 230400; + } else { + sClockPrescale = 0x14; /* mod 4 (devide by 5) prescale */ + rp_baud_base[i] = 460800; + } + + for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++) + aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400); + + num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio, MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0); + + if (ctlp->boardType == ROCKET_TYPE_PC104) { + sEnAiop(ctlp, 2); /* only one AIOPIC, but these */ + sEnAiop(ctlp, 3); /* CSels used for other stuff */ + } + + /* If something went wrong initing the AIOP's release the ISA IO memory */ + if (num_aiops <= 0) { + release_region(rcktpt_io_addr[i], 64); + rcktpt_io_addr[i] = 0; + return (0); + } + + rocketModel[i].startingPortNumber = nextLineNumber; + + for (aiop = 0; aiop < num_aiops; aiop++) { + sResetAiopByNum(ctlp, aiop); + sEnAiop(ctlp, aiop); + num_chan = sGetAiopNumChan(ctlp, aiop); + total_num_chan += num_chan; + for (chan = 0; chan < num_chan; chan++) + init_r_port(i, aiop, chan, NULL); + } + is_PCI[i] = 0; + if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) { + num_chan = sGetAiopNumChan(ctlp, 0); + total_num_chan = num_chan; + for (chan = 0; chan < num_chan; chan++) + sModemReset(ctlp, chan, 1); + msleep(500); + for (chan = 0; chan < num_chan; chan++) + sModemReset(ctlp, chan, 0); + msleep(500); + strcpy(rocketModel[i].modelString, "RocketModem ISA"); + } else { + strcpy(rocketModel[i].modelString, "RocketPort ISA"); + } + rocketModel[i].numPorts = total_num_chan; + rocketModel[i].model = MODEL_ISA; + + printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n", + i, rcktpt_io_addr[i], num_aiops, type_string); + + printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n", + rocketModel[i].modelString, + rocketModel[i].startingPortNumber, + rocketModel[i].startingPortNumber + + rocketModel[i].numPorts - 1); + + return (1); +} + +static const struct tty_operations rocket_ops = { + .open = rp_open, + .close = rp_close, + .write = rp_write, + .put_char = rp_put_char, + .write_room = rp_write_room, + .chars_in_buffer = rp_chars_in_buffer, + .flush_buffer = rp_flush_buffer, + .ioctl = rp_ioctl, + .throttle = rp_throttle, + .unthrottle = rp_unthrottle, + .set_termios = rp_set_termios, + .stop = rp_stop, + .start = rp_start, + .hangup = rp_hangup, + .break_ctl = rp_break, + .send_xchar = rp_send_xchar, + .wait_until_sent = rp_wait_until_sent, + .tiocmget = rp_tiocmget, + .tiocmset = rp_tiocmset, +}; + +static const struct tty_port_operations rocket_port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, +}; + +/* + * The module "startup" routine; it's run when the module is loaded. + */ +static int __init rp_init(void) +{ + int ret = -ENOMEM, pci_boards_found, isa_boards_found, i; + + printk(KERN_INFO "RocketPort device driver module, version %s, %s\n", + ROCKET_VERSION, ROCKET_DATE); + + rocket_driver = alloc_tty_driver(MAX_RP_PORTS); + if (!rocket_driver) + goto err; + + /* + * If board 1 is non-zero, there is at least one ISA configured. If controller is + * zero, use the default controller IO address of board1 + 0x40. + */ + if (board1) { + if (controller == 0) + controller = board1 + 0x40; + } else { + controller = 0; /* Used as a flag, meaning no ISA boards */ + } + + /* If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */ + if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) { + printk(KERN_ERR "Unable to reserve IO region for first " + "configured ISA RocketPort controller 0x%lx. " + "Driver exiting\n", controller); + ret = -EBUSY; + goto err_tty; + } + + /* Store ISA variable retrieved from command line or .conf file. */ + rcktpt_io_addr[0] = board1; + rcktpt_io_addr[1] = board2; + rcktpt_io_addr[2] = board3; + rcktpt_io_addr[3] = board4; + + rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; + rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0]; + rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; + rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1]; + rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; + rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2]; + rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; + rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3]; + + /* + * Set up the tty driver structure and then register this + * driver with the tty layer. + */ + + rocket_driver->owner = THIS_MODULE; + rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV; + rocket_driver->name = "ttyR"; + rocket_driver->driver_name = "Comtrol RocketPort"; + rocket_driver->major = TTY_ROCKET_MAJOR; + rocket_driver->minor_start = 0; + rocket_driver->type = TTY_DRIVER_TYPE_SERIAL; + rocket_driver->subtype = SERIAL_TYPE_NORMAL; + rocket_driver->init_termios = tty_std_termios; + rocket_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + rocket_driver->init_termios.c_ispeed = 9600; + rocket_driver->init_termios.c_ospeed = 9600; +#ifdef ROCKET_SOFT_FLOW + rocket_driver->flags |= TTY_DRIVER_REAL_RAW; +#endif + tty_set_operations(rocket_driver, &rocket_ops); + + ret = tty_register_driver(rocket_driver); + if (ret < 0) { + printk(KERN_ERR "Couldn't install tty RocketPort driver\n"); + goto err_controller; + } + +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major); +#endif + + /* + * OK, let's probe each of the controllers looking for boards. Any boards found + * will be initialized here. + */ + isa_boards_found = 0; + pci_boards_found = 0; + + for (i = 0; i < NUM_BOARDS; i++) { + if (init_ISA(i)) + isa_boards_found++; + } + +#ifdef CONFIG_PCI + if (isa_boards_found < NUM_BOARDS) + pci_boards_found = init_PCI(isa_boards_found); +#endif + + max_board = pci_boards_found + isa_boards_found; + + if (max_board == 0) { + printk(KERN_ERR "No rocketport ports found; unloading driver\n"); + ret = -ENXIO; + goto err_ttyu; + } + + return 0; +err_ttyu: + tty_unregister_driver(rocket_driver); +err_controller: + if (controller) + release_region(controller, 4); +err_tty: + put_tty_driver(rocket_driver); +err: + return ret; +} + + +static void rp_cleanup_module(void) +{ + int retval; + int i; + + del_timer_sync(&rocket_timer); + + retval = tty_unregister_driver(rocket_driver); + if (retval) + printk(KERN_ERR "Error %d while trying to unregister " + "rocketport driver\n", -retval); + + for (i = 0; i < MAX_RP_PORTS; i++) + if (rp_table[i]) { + tty_unregister_device(rocket_driver, i); + kfree(rp_table[i]); + } + + put_tty_driver(rocket_driver); + + for (i = 0; i < NUM_BOARDS; i++) { + if (rcktpt_io_addr[i] <= 0 || is_PCI[i]) + continue; + release_region(rcktpt_io_addr[i], 64); + } + if (controller) + release_region(controller, 4); +} + +/*************************************************************************** +Function: sInitController +Purpose: Initialization of controller global registers and controller + structure. +Call: sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize, + IRQNum,Frequency,PeriodicOnly) + CONTROLLER_T *CtlP; Ptr to controller structure + int CtlNum; Controller number + ByteIO_t MudbacIO; Mudbac base I/O address. + ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. + This list must be in the order the AIOPs will be found on the + controller. Once an AIOP in the list is not found, it is + assumed that there are no more AIOPs on the controller. + int AiopIOListSize; Number of addresses in AiopIOList + int IRQNum; Interrupt Request number. Can be any of the following: + 0: Disable global interrupts + 3: IRQ 3 + 4: IRQ 4 + 5: IRQ 5 + 9: IRQ 9 + 10: IRQ 10 + 11: IRQ 11 + 12: IRQ 12 + 15: IRQ 15 + Byte_t Frequency: A flag identifying the frequency + of the periodic interrupt, can be any one of the following: + FREQ_DIS - periodic interrupt disabled + FREQ_137HZ - 137 Hertz + FREQ_69HZ - 69 Hertz + FREQ_34HZ - 34 Hertz + FREQ_17HZ - 17 Hertz + FREQ_9HZ - 9 Hertz + FREQ_4HZ - 4 Hertz + If IRQNum is set to 0 the Frequency parameter is + overidden, it is forced to a value of FREQ_DIS. + int PeriodicOnly: 1 if all interrupts except the periodic + interrupt are to be blocked. + 0 is both the periodic interrupt and + other channel interrupts are allowed. + If IRQNum is set to 0 the PeriodicOnly parameter is + overidden, it is forced to a value of 0. +Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller + initialization failed. + +Comments: + If periodic interrupts are to be disabled but AIOP interrupts + are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. + + If interrupts are to be completely disabled set IRQNum to 0. + + Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an + invalid combination. + + This function performs initialization of global interrupt modes, + but it does not actually enable global interrupts. To enable + and disable global interrupts use functions sEnGlobalInt() and + sDisGlobalInt(). Enabling of global interrupts is normally not + done until all other initializations are complete. + + Even if interrupts are globally enabled, they must also be + individually enabled for each channel that is to generate + interrupts. + +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. + + After this function all AIOPs on the controller are disabled, + they can be enabled with sEnAiop(). +*/ +static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, + ByteIO_t * AiopIOList, int AiopIOListSize, + int IRQNum, Byte_t Frequency, int PeriodicOnly) +{ + int i; + ByteIO_t io; + int done; + + CtlP->AiopIntrBits = aiop_intr_bits; + CtlP->AltChanRingIndicator = 0; + CtlP->CtlNum = CtlNum; + CtlP->CtlID = CTLID_0001; /* controller release 1 */ + CtlP->BusType = isISA; + CtlP->MBaseIO = MudbacIO; + CtlP->MReg1IO = MudbacIO + 1; + CtlP->MReg2IO = MudbacIO + 2; + CtlP->MReg3IO = MudbacIO + 3; +#if 1 + CtlP->MReg2 = 0; /* interrupt disable */ + CtlP->MReg3 = 0; /* no periodic interrupts */ +#else + if (sIRQMap[IRQNum] == 0) { /* interrupts globally disabled */ + CtlP->MReg2 = 0; /* interrupt disable */ + CtlP->MReg3 = 0; /* no periodic interrupts */ + } else { + CtlP->MReg2 = sIRQMap[IRQNum]; /* set IRQ number */ + CtlP->MReg3 = Frequency; /* set frequency */ + if (PeriodicOnly) { /* periodic interrupt only */ + CtlP->MReg3 |= PERIODIC_ONLY; + } + } +#endif + sOutB(CtlP->MReg2IO, CtlP->MReg2); + sOutB(CtlP->MReg3IO, CtlP->MReg3); + sControllerEOI(CtlP); /* clear EOI if warm init */ + /* Init AIOPs */ + CtlP->NumAiop = 0; + for (i = done = 0; i < AiopIOListSize; i++) { + io = AiopIOList[i]; + CtlP->AiopIO[i] = (WordIO_t) io; + CtlP->AiopIntChanIO[i] = io + _INT_CHAN; + sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */ + sOutB(MudbacIO, (Byte_t) (io >> 6)); /* set up AIOP I/O in MUDBAC */ + if (done) + continue; + sEnAiop(CtlP, i); /* enable the AIOP */ + CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ + if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ + done = 1; /* done looking for AIOPs */ + else { + CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ + sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ + sOutB(io + _INDX_DATA, sClockPrescale); + CtlP->NumAiop++; /* bump count of AIOPs */ + } + sDisAiop(CtlP, i); /* disable AIOP */ + } + + if (CtlP->NumAiop == 0) + return (-1); + else + return (CtlP->NumAiop); +} + +/*************************************************************************** +Function: sPCIInitController +Purpose: Initialization of controller global registers and controller + structure. +Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, + IRQNum,Frequency,PeriodicOnly) + CONTROLLER_T *CtlP; Ptr to controller structure + int CtlNum; Controller number + ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. + This list must be in the order the AIOPs will be found on the + controller. Once an AIOP in the list is not found, it is + assumed that there are no more AIOPs on the controller. + int AiopIOListSize; Number of addresses in AiopIOList + int IRQNum; Interrupt Request number. Can be any of the following: + 0: Disable global interrupts + 3: IRQ 3 + 4: IRQ 4 + 5: IRQ 5 + 9: IRQ 9 + 10: IRQ 10 + 11: IRQ 11 + 12: IRQ 12 + 15: IRQ 15 + Byte_t Frequency: A flag identifying the frequency + of the periodic interrupt, can be any one of the following: + FREQ_DIS - periodic interrupt disabled + FREQ_137HZ - 137 Hertz + FREQ_69HZ - 69 Hertz + FREQ_34HZ - 34 Hertz + FREQ_17HZ - 17 Hertz + FREQ_9HZ - 9 Hertz + FREQ_4HZ - 4 Hertz + If IRQNum is set to 0 the Frequency parameter is + overidden, it is forced to a value of FREQ_DIS. + int PeriodicOnly: 1 if all interrupts except the periodic + interrupt are to be blocked. + 0 is both the periodic interrupt and + other channel interrupts are allowed. + If IRQNum is set to 0 the PeriodicOnly parameter is + overidden, it is forced to a value of 0. +Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller + initialization failed. + +Comments: + If periodic interrupts are to be disabled but AIOP interrupts + are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. + + If interrupts are to be completely disabled set IRQNum to 0. + + Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an + invalid combination. + + This function performs initialization of global interrupt modes, + but it does not actually enable global interrupts. To enable + and disable global interrupts use functions sEnGlobalInt() and + sDisGlobalInt(). Enabling of global interrupts is normally not + done until all other initializations are complete. + + Even if interrupts are globally enabled, they must also be + individually enabled for each channel that is to generate + interrupts. + +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. + + After this function all AIOPs on the controller are disabled, + they can be enabled with sEnAiop(). +*/ +static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, + ByteIO_t * AiopIOList, int AiopIOListSize, + WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, + int PeriodicOnly, int altChanRingIndicator, + int UPCIRingInd) +{ + int i; + ByteIO_t io; + + CtlP->AltChanRingIndicator = altChanRingIndicator; + CtlP->UPCIRingInd = UPCIRingInd; + CtlP->CtlNum = CtlNum; + CtlP->CtlID = CTLID_0001; /* controller release 1 */ + CtlP->BusType = isPCI; /* controller release 1 */ + + if (ConfigIO) { + CtlP->isUPCI = 1; + CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; + CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; + CtlP->AiopIntrBits = upci_aiop_intr_bits; + } else { + CtlP->isUPCI = 0; + CtlP->PCIIO = + (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); + CtlP->AiopIntrBits = aiop_intr_bits; + } + + sPCIControllerEOI(CtlP); /* clear EOI if warm init */ + /* Init AIOPs */ + CtlP->NumAiop = 0; + for (i = 0; i < AiopIOListSize; i++) { + io = AiopIOList[i]; + CtlP->AiopIO[i] = (WordIO_t) io; + CtlP->AiopIntChanIO[i] = io + _INT_CHAN; + + CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ + if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ + break; /* done looking for AIOPs */ + + CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ + sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ + sOutB(io + _INDX_DATA, sClockPrescale); + CtlP->NumAiop++; /* bump count of AIOPs */ + } + + if (CtlP->NumAiop == 0) + return (-1); + else + return (CtlP->NumAiop); +} + +/*************************************************************************** +Function: sReadAiopID +Purpose: Read the AIOP idenfication number directly from an AIOP. +Call: sReadAiopID(io) + ByteIO_t io: AIOP base I/O address +Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X + is replace by an identifying number. + Flag AIOPID_NULL if no valid AIOP is found +Warnings: No context switches are allowed while executing this function. + +*/ +static int sReadAiopID(ByteIO_t io) +{ + Byte_t AiopID; /* ID byte from AIOP */ + + sOutB(io + _CMD_REG, RESET_ALL); /* reset AIOP */ + sOutB(io + _CMD_REG, 0x0); + AiopID = sInW(io + _CHN_STAT0) & 0x07; + if (AiopID == 0x06) + return (1); + else /* AIOP does not exist */ + return (-1); +} + +/*************************************************************************** +Function: sReadAiopNumChan +Purpose: Read the number of channels available in an AIOP directly from + an AIOP. +Call: sReadAiopNumChan(io) + WordIO_t io: AIOP base I/O address +Return: int: The number of channels available +Comments: The number of channels is determined by write/reads from identical + offsets within the SRAM address spaces for channels 0 and 4. + If the channel 4 space is mirrored to channel 0 it is a 4 channel + AIOP, otherwise it is an 8 channel. +Warnings: No context switches are allowed while executing this function. +*/ +static int sReadAiopNumChan(WordIO_t io) +{ + Word_t x; + static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 }; + + /* write to chan 0 SRAM */ + out32((DWordIO_t) io + _INDX_ADDR, R); + sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */ + x = sInW(io + _INDX_DATA); + sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */ + if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */ + return (8); + else + return (4); +} + +/*************************************************************************** +Function: sInitChan +Purpose: Initialization of a channel and channel structure +Call: sInitChan(CtlP,ChP,AiopNum,ChanNum) + CONTROLLER_T *CtlP; Ptr to controller structure + CHANNEL_T *ChP; Ptr to channel structure + int AiopNum; AIOP number within controller + int ChanNum; Channel number within AIOP +Return: int: 1 if initialization succeeded, 0 if it fails because channel + number exceeds number of channels available in AIOP. +Comments: This function must be called before a channel can be used. +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. +*/ +static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum, + int ChanNum) +{ + int i; + WordIO_t AiopIO; + WordIO_t ChIOOff; + Byte_t *ChR; + Word_t ChOff; + static Byte_t R[4]; + int brd9600; + + if (ChanNum >= CtlP->AiopNumChan[AiopNum]) + return 0; /* exceeds num chans in AIOP */ + + /* Channel, AIOP, and controller identifiers */ + ChP->CtlP = CtlP; + ChP->ChanID = CtlP->AiopID[AiopNum]; + ChP->AiopNum = AiopNum; + ChP->ChanNum = ChanNum; + + /* Global direct addresses */ + AiopIO = CtlP->AiopIO[AiopNum]; + ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG; + ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN; + ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK; + ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR; + ChP->IndexData = AiopIO + _INDX_DATA; + + /* Channel direct addresses */ + ChIOOff = AiopIO + ChP->ChanNum * 2; + ChP->TxRxData = ChIOOff + _TD0; + ChP->ChanStat = ChIOOff + _CHN_STAT0; + ChP->TxRxCount = ChIOOff + _FIFO_CNT0; + ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0; + + /* Initialize the channel from the RData array */ + for (i = 0; i < RDATASIZE; i += 4) { + R[0] = RData[i]; + R[1] = RData[i + 1] + 0x10 * ChanNum; + R[2] = RData[i + 2]; + R[3] = RData[i + 3]; + out32(ChP->IndexAddr, R); + } + + ChR = ChP->R; + for (i = 0; i < RREGDATASIZE; i += 4) { + ChR[i] = RRegData[i]; + ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum; + ChR[i + 2] = RRegData[i + 2]; + ChR[i + 3] = RRegData[i + 3]; + } + + /* Indexed registers */ + ChOff = (Word_t) ChanNum *0x1000; + + if (sClockPrescale == 0x14) + brd9600 = 47; + else + brd9600 = 23; + + ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD); + ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8); + ChP->BaudDiv[2] = (Byte_t) brd9600; + ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8); + out32(ChP->IndexAddr, ChP->BaudDiv); + + ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL); + ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8); + ChP->TxControl[2] = 0; + ChP->TxControl[3] = 0; + out32(ChP->IndexAddr, ChP->TxControl); + + ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL); + ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8); + ChP->RxControl[2] = 0; + ChP->RxControl[3] = 0; + out32(ChP->IndexAddr, ChP->RxControl); + + ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS); + ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8); + ChP->TxEnables[2] = 0; + ChP->TxEnables[3] = 0; + out32(ChP->IndexAddr, ChP->TxEnables); + + ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1); + ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8); + ChP->TxCompare[2] = 0; + ChP->TxCompare[3] = 0; + out32(ChP->IndexAddr, ChP->TxCompare); + + ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1); + ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8); + ChP->TxReplace1[2] = 0; + ChP->TxReplace1[3] = 0; + out32(ChP->IndexAddr, ChP->TxReplace1); + + ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2); + ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8); + ChP->TxReplace2[2] = 0; + ChP->TxReplace2[3] = 0; + out32(ChP->IndexAddr, ChP->TxReplace2); + + ChP->TxFIFOPtrs = ChOff + _TXF_OUTP; + ChP->TxFIFO = ChOff + _TX_FIFO; + + sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */ + sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Tx FIFO count */ + sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */ + sOutW(ChP->IndexData, 0); + ChP->RxFIFOPtrs = ChOff + _RXF_OUTP; + ChP->RxFIFO = ChOff + _RX_FIFO; + + sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */ + sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Rx FIFO count */ + sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */ + sOutW(ChP->IndexData, 0); + sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */ + sOutW(ChP->IndexData, 0); + ChP->TxPrioCnt = ChOff + _TXP_CNT; + sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt); + sOutB(ChP->IndexData, 0); + ChP->TxPrioPtr = ChOff + _TXP_PNTR; + sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr); + sOutB(ChP->IndexData, 0); + ChP->TxPrioBuf = ChOff + _TXP_BUF; + sEnRxProcessor(ChP); /* start the Rx processor */ + + return 1; +} + +/*************************************************************************** +Function: sStopRxProcessor +Purpose: Stop the receive processor from processing a channel. +Call: sStopRxProcessor(ChP) + CHANNEL_T *ChP; Ptr to channel structure + +Comments: The receive processor can be started again with sStartRxProcessor(). + This function causes the receive processor to skip over the + stopped channel. It does not stop it from processing other channels. + +Warnings: No context switches are allowed while executing this function. + + Do not leave the receive processor stopped for more than one + character time. + + After calling this function a delay of 4 uS is required to ensure + that the receive processor is no longer processing this channel. +*/ +static void sStopRxProcessor(CHANNEL_T * ChP) +{ + Byte_t R[4]; + + R[0] = ChP->R[0]; + R[1] = ChP->R[1]; + R[2] = 0x0a; + R[3] = ChP->R[3]; + out32(ChP->IndexAddr, R); +} + +/*************************************************************************** +Function: sFlushRxFIFO +Purpose: Flush the Rx FIFO +Call: sFlushRxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: void +Comments: To prevent data from being enqueued or dequeued in the Tx FIFO + while it is being flushed the receive processor is stopped + and the transmitter is disabled. After these operations a + 4 uS delay is done before clearing the pointers to allow + the receive processor to stop. These items are handled inside + this function. +Warnings: No context switches are allowed while executing this function. +*/ +static void sFlushRxFIFO(CHANNEL_T * ChP) +{ + int i; + Byte_t Ch; /* channel number within AIOP */ + int RxFIFOEnabled; /* 1 if Rx FIFO enabled */ + + if (sGetRxCnt(ChP) == 0) /* Rx FIFO empty */ + return; /* don't need to flush */ + + RxFIFOEnabled = 0; + if (ChP->R[0x32] == 0x08) { /* Rx FIFO is enabled */ + RxFIFOEnabled = 1; + sDisRxFIFO(ChP); /* disable it */ + for (i = 0; i < 2000 / 200; i++) /* delay 2 uS to allow proc to disable FIFO */ + sInB(ChP->IntChan); /* depends on bus i/o timing */ + } + sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */ + Ch = (Byte_t) sGetChanNum(ChP); + sOutB(ChP->Cmd, Ch | RESRXFCNT); /* apply reset Rx FIFO count */ + sOutB(ChP->Cmd, Ch); /* remove reset Rx FIFO count */ + sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */ + sOutW(ChP->IndexData, 0); + sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */ + sOutW(ChP->IndexData, 0); + if (RxFIFOEnabled) + sEnRxFIFO(ChP); /* enable Rx FIFO */ +} + +/*************************************************************************** +Function: sFlushTxFIFO +Purpose: Flush the Tx FIFO +Call: sFlushTxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: void +Comments: To prevent data from being enqueued or dequeued in the Tx FIFO + while it is being flushed the receive processor is stopped + and the transmitter is disabled. After these operations a + 4 uS delay is done before clearing the pointers to allow + the receive processor to stop. These items are handled inside + this function. +Warnings: No context switches are allowed while executing this function. +*/ +static void sFlushTxFIFO(CHANNEL_T * ChP) +{ + int i; + Byte_t Ch; /* channel number within AIOP */ + int TxEnabled; /* 1 if transmitter enabled */ + + if (sGetTxCnt(ChP) == 0) /* Tx FIFO empty */ + return; /* don't need to flush */ + + TxEnabled = 0; + if (ChP->TxControl[3] & TX_ENABLE) { + TxEnabled = 1; + sDisTransmit(ChP); /* disable transmitter */ + } + sStopRxProcessor(ChP); /* stop Rx processor */ + for (i = 0; i < 4000 / 200; i++) /* delay 4 uS to allow proc to stop */ + sInB(ChP->IntChan); /* depends on bus i/o timing */ + Ch = (Byte_t) sGetChanNum(ChP); + sOutB(ChP->Cmd, Ch | RESTXFCNT); /* apply reset Tx FIFO count */ + sOutB(ChP->Cmd, Ch); /* remove reset Tx FIFO count */ + sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */ + sOutW(ChP->IndexData, 0); + if (TxEnabled) + sEnTransmit(ChP); /* enable transmitter */ + sStartRxProcessor(ChP); /* restart Rx processor */ +} + +/*************************************************************************** +Function: sWriteTxPrioByte +Purpose: Write a byte of priority transmit data to a channel +Call: sWriteTxPrioByte(ChP,Data) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Data; The transmit data byte + +Return: int: 1 if the bytes is successfully written, otherwise 0. + +Comments: The priority byte is transmitted before any data in the Tx FIFO. + +Warnings: No context switches are allowed while executing this function. +*/ +static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data) +{ + Byte_t DWBuf[4]; /* buffer for double word writes */ + Word_t *WordPtr; /* must be far because Win SS != DS */ + register DWordIO_t IndexAddr; + + if (sGetTxCnt(ChP) > 1) { /* write it to Tx priority buffer */ + IndexAddr = ChP->IndexAddr; + sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt); /* get priority buffer status */ + if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */ + return (0); /* nothing sent */ + + WordPtr = (Word_t *) (&DWBuf[0]); + *WordPtr = ChP->TxPrioBuf; /* data byte address */ + + DWBuf[2] = Data; /* data byte value */ + out32(IndexAddr, DWBuf); /* write it out */ + + *WordPtr = ChP->TxPrioCnt; /* Tx priority count address */ + + DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */ + DWBuf[3] = 0; /* priority buffer pointer */ + out32(IndexAddr, DWBuf); /* write it out */ + } else { /* write it to Tx FIFO */ + + sWriteTxByte(sGetTxRxDataIO(ChP), Data); + } + return (1); /* 1 byte sent */ +} + +/*************************************************************************** +Function: sEnInterrupts +Purpose: Enable one or more interrupts for a channel +Call: sEnInterrupts(ChP,Flags) + CHANNEL_T *ChP; Ptr to channel structure + Word_t Flags: Interrupt enable flags, can be any combination + of the following flags: + TXINT_EN: Interrupt on Tx FIFO empty + RXINT_EN: Interrupt on Rx FIFO at trigger level (see + sSetRxTrigger()) + SRCINT_EN: Interrupt on SRC (Special Rx Condition) + MCINT_EN: Interrupt on modem input change + CHANINT_EN: Allow channel interrupt signal to the AIOP's + Interrupt Channel Register. +Return: void +Comments: If an interrupt enable flag is set in Flags, that interrupt will be + enabled. If an interrupt enable flag is not set in Flags, that + interrupt will not be changed. Interrupts can be disabled with + function sDisInterrupts(). + + This function sets the appropriate bit for the channel in the AIOP's + Interrupt Mask Register if the CHANINT_EN flag is set. This allows + this channel's bit to be set in the AIOP's Interrupt Channel Register. + + Interrupts must also be globally enabled before channel interrupts + will be passed on to the host. This is done with function + sEnGlobalInt(). + + In some cases it may be desirable to disable interrupts globally but + enable channel interrupts. This would allow the global interrupt + status register to be used to determine which AIOPs need service. +*/ +static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags) +{ + Byte_t Mask; /* Interrupt Mask Register */ + + ChP->RxControl[2] |= + ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN)); + + out32(ChP->IndexAddr, ChP->RxControl); + + ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN); + + out32(ChP->IndexAddr, ChP->TxControl); + + if (Flags & CHANINT_EN) { + Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum]; + sOutB(ChP->IntMask, Mask); + } +} + +/*************************************************************************** +Function: sDisInterrupts +Purpose: Disable one or more interrupts for a channel +Call: sDisInterrupts(ChP,Flags) + CHANNEL_T *ChP; Ptr to channel structure + Word_t Flags: Interrupt flags, can be any combination + of the following flags: + TXINT_EN: Interrupt on Tx FIFO empty + RXINT_EN: Interrupt on Rx FIFO at trigger level (see + sSetRxTrigger()) + SRCINT_EN: Interrupt on SRC (Special Rx Condition) + MCINT_EN: Interrupt on modem input change + CHANINT_EN: Disable channel interrupt signal to the + AIOP's Interrupt Channel Register. +Return: void +Comments: If an interrupt flag is set in Flags, that interrupt will be + disabled. If an interrupt flag is not set in Flags, that + interrupt will not be changed. Interrupts can be enabled with + function sEnInterrupts(). + + This function clears the appropriate bit for the channel in the AIOP's + Interrupt Mask Register if the CHANINT_EN flag is set. This blocks + this channel's bit from being set in the AIOP's Interrupt Channel + Register. +*/ +static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags) +{ + Byte_t Mask; /* Interrupt Mask Register */ + + ChP->RxControl[2] &= + ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN)); + out32(ChP->IndexAddr, ChP->RxControl); + ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN); + out32(ChP->IndexAddr, ChP->TxControl); + + if (Flags & CHANINT_EN) { + Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum]; + sOutB(ChP->IntMask, Mask); + } +} + +static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode) +{ + sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum); +} + +/* + * Not an official SSCI function, but how to reset RocketModems. + * ISA bus version + */ +static void sModemReset(CONTROLLER_T * CtlP, int chan, int on) +{ + ByteIO_t addr; + Byte_t val; + + addr = CtlP->AiopIO[0] + 0x400; + val = sInB(CtlP->MReg3IO); + /* if AIOP[1] is not enabled, enable it */ + if ((val & 2) == 0) { + val = sInB(CtlP->MReg2IO); + sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03)); + sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6)); + } + + sEnAiop(CtlP, 1); + if (!on) + addr += 8; + sOutB(addr + chan, 0); /* apply or remove reset */ + sDisAiop(CtlP, 1); +} + +/* + * Not an official SSCI function, but how to reset RocketModems. + * PCI bus version + */ +static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on) +{ + ByteIO_t addr; + + addr = CtlP->AiopIO[0] + 0x40; /* 2nd AIOP */ + if (!on) + addr += 8; + sOutB(addr + chan, 0); /* apply or remove reset */ +} + +/* Resets the speaker controller on RocketModem II and III devices */ +static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) +{ + ByteIO_t addr; + + /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ + if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { + addr = CtlP->AiopIO[0] + 0x4F; + sOutB(addr, 0); + } + + /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ + if ((model == MODEL_UPCI_RM3_8PORT) + || (model == MODEL_UPCI_RM3_4PORT)) { + addr = CtlP->AiopIO[0] + 0x88; + sOutB(addr, 0); + } +} + +/* Returns the line number given the controller (board), aiop and channel number */ +static unsigned char GetLineNumber(int ctrl, int aiop, int ch) +{ + return lineNumbers[(ctrl << 5) | (aiop << 3) | ch]; +} + +/* + * Stores the line number associated with a given controller (board), aiop + * and channel number. + * Returns: The line number assigned + */ +static unsigned char SetLineNumber(int ctrl, int aiop, int ch) +{ + lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++; + return (nextLineNumber - 1); +} diff --git a/drivers/tty/rocket.h b/drivers/tty/rocket.h new file mode 100644 index 000000000000..ec863f35f1a9 --- /dev/null +++ b/drivers/tty/rocket.h @@ -0,0 +1,111 @@ +/* + * rocket.h --- the exported interface of the rocket driver to its configuration program. + * + * Written by Theodore Ts'o, Copyright 1997. + * Copyright 1997 Comtrol Corporation. + * + */ + +/* Model Information Struct */ +typedef struct { + unsigned long model; + char modelString[80]; + unsigned long numPorts; + int loadrm2; + int startingPortNumber; +} rocketModel_t; + +struct rocket_config { + int line; + int flags; + int closing_wait; + int close_delay; + int port; + int reserved[32]; +}; + +struct rocket_ports { + int tty_major; + int callout_major; + rocketModel_t rocketModel[8]; +}; + +struct rocket_version { + char rocket_version[32]; + char rocket_date[32]; + char reserved[64]; +}; + +/* + * Rocketport flags + */ +/*#define ROCKET_CALLOUT_NOHUP 0x00000001 */ +#define ROCKET_FORCE_CD 0x00000002 +#define ROCKET_HUP_NOTIFY 0x00000004 +#define ROCKET_SPLIT_TERMIOS 0x00000008 +#define ROCKET_SPD_MASK 0x00000070 +#define ROCKET_SPD_HI 0x00000010 /* Use 56000 instead of 38400 bps */ +#define ROCKET_SPD_VHI 0x00000020 /* Use 115200 instead of 38400 bps */ +#define ROCKET_SPD_SHI 0x00000030 /* Use 230400 instead of 38400 bps */ +#define ROCKET_SPD_WARP 0x00000040 /* Use 460800 instead of 38400 bps */ +#define ROCKET_SAK 0x00000080 +#define ROCKET_SESSION_LOCKOUT 0x00000100 +#define ROCKET_PGRP_LOCKOUT 0x00000200 +#define ROCKET_RTS_TOGGLE 0x00000400 +#define ROCKET_MODE_MASK 0x00003000 +#define ROCKET_MODE_RS232 0x00000000 +#define ROCKET_MODE_RS485 0x00001000 +#define ROCKET_MODE_RS422 0x00002000 +#define ROCKET_FLAGS 0x00003FFF + +#define ROCKET_USR_MASK 0x0071 /* Legal flags that non-privileged + * users can set or reset */ + +/* + * For closing_wait and closing_wait2 + */ +#define ROCKET_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE +#define ROCKET_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF + +/* + * Rocketport ioctls -- "RP" + */ +#define RCKP_GET_STRUCT 0x00525001 +#define RCKP_GET_CONFIG 0x00525002 +#define RCKP_SET_CONFIG 0x00525003 +#define RCKP_GET_PORTS 0x00525004 +#define RCKP_RESET_RM2 0x00525005 +#define RCKP_GET_VERSION 0x00525006 + +/* Rocketport Models */ +#define MODEL_RP32INTF 0x0001 /* RP 32 port w/external I/F */ +#define MODEL_RP8INTF 0x0002 /* RP 8 port w/external I/F */ +#define MODEL_RP16INTF 0x0003 /* RP 16 port w/external I/F */ +#define MODEL_RP8OCTA 0x0005 /* RP 8 port w/octa cable */ +#define MODEL_RP4QUAD 0x0004 /* RP 4 port w/quad cable */ +#define MODEL_RP8J 0x0006 /* RP 8 port w/RJ11 connectors */ +#define MODEL_RP4J 0x0007 /* RP 4 port w/RJ45 connectors */ +#define MODEL_RP8SNI 0x0008 /* RP 8 port w/ DB78 SNI connector */ +#define MODEL_RP16SNI 0x0009 /* RP 16 port w/ DB78 SNI connector */ +#define MODEL_RPP4 0x000A /* RP Plus 4 port */ +#define MODEL_RPP8 0x000B /* RP Plus 8 port */ +#define MODEL_RP2_232 0x000E /* RP Plus 2 port RS232 */ +#define MODEL_RP2_422 0x000F /* RP Plus 2 port RS232 */ + +/* Rocketmodem II Models */ +#define MODEL_RP6M 0x000C /* RM 6 port */ +#define MODEL_RP4M 0x000D /* RM 4 port */ + +/* Universal PCI boards */ +#define MODEL_UPCI_RP32INTF 0x0801 /* RP UPCI 32 port w/external I/F */ +#define MODEL_UPCI_RP8INTF 0x0802 /* RP UPCI 8 port w/external I/F */ +#define MODEL_UPCI_RP16INTF 0x0803 /* RP UPCI 16 port w/external I/F */ +#define MODEL_UPCI_RP8OCTA 0x0805 /* RP UPCI 8 port w/octa cable */ +#define MODEL_UPCI_RM3_8PORT 0x080C /* RP UPCI Rocketmodem III 8 port */ +#define MODEL_UPCI_RM3_4PORT 0x080C /* RP UPCI Rocketmodem III 4 port */ + +/* Compact PCI 16 port */ +#define MODEL_CPCI_RP16INTF 0x0903 /* RP Compact PCI 16 port w/external I/F */ + +/* All ISA boards */ +#define MODEL_ISA 0x1000 diff --git a/drivers/tty/rocket_int.h b/drivers/tty/rocket_int.h new file mode 100644 index 000000000000..67e0f1e778a2 --- /dev/null +++ b/drivers/tty/rocket_int.h @@ -0,0 +1,1214 @@ +/* + * rocket_int.h --- internal header file for rocket.c + * + * Written by Theodore Ts'o, Copyright 1997. + * Copyright 1997 Comtrol Corporation. + * + */ + +/* + * Definition of the types in rcktpt_type + */ +#define ROCKET_TYPE_NORMAL 0 +#define ROCKET_TYPE_MODEM 1 +#define ROCKET_TYPE_MODEMII 2 +#define ROCKET_TYPE_MODEMIII 3 +#define ROCKET_TYPE_PC104 4 + +#include + +#include +#include + +typedef unsigned char Byte_t; +typedef unsigned int ByteIO_t; + +typedef unsigned int Word_t; +typedef unsigned int WordIO_t; + +typedef unsigned int DWordIO_t; + +/* + * Note! Normally the Linux I/O macros already take care of + * byte-swapping the I/O instructions. However, all accesses using + * sOutDW aren't really 32-bit accesses, but should be handled in byte + * order. Hence the use of the cpu_to_le32() macro to byte-swap + * things to no-op the byte swapping done by the big-endian outl() + * instruction. + */ + +static inline void sOutB(unsigned short port, unsigned char value) +{ +#ifdef ROCKET_DEBUG_IO + printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value); +#endif + outb_p(value, port); +} + +static inline void sOutW(unsigned short port, unsigned short value) +{ +#ifdef ROCKET_DEBUG_IO + printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value); +#endif + outw_p(value, port); +} + +static inline void out32(unsigned short port, Byte_t *p) +{ + u32 value = get_unaligned_le32(p); +#ifdef ROCKET_DEBUG_IO + printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value); +#endif + outl_p(value, port); +} + +static inline unsigned char sInB(unsigned short port) +{ + return inb_p(port); +} + +static inline unsigned short sInW(unsigned short port) +{ + return inw_p(port); +} + +/* This is used to move arrays of bytes so byte swapping isn't appropriate. */ +#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count) +#define sInStrW(port, addr, count) if (count) insw(port, addr, count) + +#define CTL_SIZE 8 +#define AIOP_CTL_SIZE 4 +#define CHAN_AIOP_SIZE 8 +#define MAX_PORTS_PER_AIOP 8 +#define MAX_AIOPS_PER_BOARD 4 +#define MAX_PORTS_PER_BOARD 32 + +/* Bus type ID */ +#define isISA 0 +#define isPCI 1 +#define isMC 2 + +/* Controller ID numbers */ +#define CTLID_NULL -1 /* no controller exists */ +#define CTLID_0001 0x0001 /* controller release 1 */ + +/* AIOP ID numbers, identifies AIOP type implementing channel */ +#define AIOPID_NULL -1 /* no AIOP or channel exists */ +#define AIOPID_0001 0x0001 /* AIOP release 1 */ + +/************************************************************************ + Global Register Offsets - Direct Access - Fixed values +************************************************************************/ + +#define _CMD_REG 0x38 /* Command Register 8 Write */ +#define _INT_CHAN 0x39 /* Interrupt Channel Register 8 Read */ +#define _INT_MASK 0x3A /* Interrupt Mask Register 8 Read / Write */ +#define _UNUSED 0x3B /* Unused 8 */ +#define _INDX_ADDR 0x3C /* Index Register Address 16 Write */ +#define _INDX_DATA 0x3E /* Index Register Data 8/16 Read / Write */ + +/************************************************************************ + Channel Register Offsets for 1st channel in AIOP - Direct Access +************************************************************************/ +#define _TD0 0x00 /* Transmit Data 16 Write */ +#define _RD0 0x00 /* Receive Data 16 Read */ +#define _CHN_STAT0 0x20 /* Channel Status 8/16 Read / Write */ +#define _FIFO_CNT0 0x10 /* Transmit/Receive FIFO Count 16 Read */ +#define _INT_ID0 0x30 /* Interrupt Identification 8 Read */ + +/************************************************************************ + Tx Control Register Offsets - Indexed - External - Fixed +************************************************************************/ +#define _TX_ENBLS 0x980 /* Tx Processor Enables Register 8 Read / Write */ +#define _TXCMP1 0x988 /* Transmit Compare Value #1 8 Read / Write */ +#define _TXCMP2 0x989 /* Transmit Compare Value #2 8 Read / Write */ +#define _TXREP1B1 0x98A /* Tx Replace Value #1 - Byte 1 8 Read / Write */ +#define _TXREP1B2 0x98B /* Tx Replace Value #1 - Byte 2 8 Read / Write */ +#define _TXREP2 0x98C /* Transmit Replace Value #2 8 Read / Write */ + +/************************************************************************ +Memory Controller Register Offsets - Indexed - External - Fixed +************************************************************************/ +#define _RX_FIFO 0x000 /* Rx FIFO */ +#define _TX_FIFO 0x800 /* Tx FIFO */ +#define _RXF_OUTP 0x990 /* Rx FIFO OUT pointer 16 Read / Write */ +#define _RXF_INP 0x992 /* Rx FIFO IN pointer 16 Read / Write */ +#define _TXF_OUTP 0x994 /* Tx FIFO OUT pointer 8 Read / Write */ +#define _TXF_INP 0x995 /* Tx FIFO IN pointer 8 Read / Write */ +#define _TXP_CNT 0x996 /* Tx Priority Count 8 Read / Write */ +#define _TXP_PNTR 0x997 /* Tx Priority Pointer 8 Read / Write */ + +#define PRI_PEND 0x80 /* Priority data pending (bit7, Tx pri cnt) */ +#define TXFIFO_SIZE 255 /* size of Tx FIFO */ +#define RXFIFO_SIZE 1023 /* size of Rx FIFO */ + +/************************************************************************ +Tx Priority Buffer - Indexed - External - Fixed +************************************************************************/ +#define _TXP_BUF 0x9C0 /* Tx Priority Buffer 32 Bytes Read / Write */ +#define TXP_SIZE 0x20 /* 32 bytes */ + +/************************************************************************ +Channel Register Offsets - Indexed - Internal - Fixed +************************************************************************/ + +#define _TX_CTRL 0xFF0 /* Transmit Control 16 Write */ +#define _RX_CTRL 0xFF2 /* Receive Control 8 Write */ +#define _BAUD 0xFF4 /* Baud Rate 16 Write */ +#define _CLK_PRE 0xFF6 /* Clock Prescaler 8 Write */ + +#define STMBREAK 0x08 /* BREAK */ +#define STMFRAME 0x04 /* framing error */ +#define STMRCVROVR 0x02 /* receiver over run error */ +#define STMPARITY 0x01 /* parity error */ +#define STMERROR (STMBREAK | STMFRAME | STMPARITY) +#define STMBREAKH 0x800 /* BREAK */ +#define STMFRAMEH 0x400 /* framing error */ +#define STMRCVROVRH 0x200 /* receiver over run error */ +#define STMPARITYH 0x100 /* parity error */ +#define STMERRORH (STMBREAKH | STMFRAMEH | STMPARITYH) + +#define CTS_ACT 0x20 /* CTS input asserted */ +#define DSR_ACT 0x10 /* DSR input asserted */ +#define CD_ACT 0x08 /* CD input asserted */ +#define TXFIFOMT 0x04 /* Tx FIFO is empty */ +#define TXSHRMT 0x02 /* Tx shift register is empty */ +#define RDA 0x01 /* Rx data available */ +#define DRAINED (TXFIFOMT | TXSHRMT) /* indicates Tx is drained */ + +#define STATMODE 0x8000 /* status mode enable bit */ +#define RXFOVERFL 0x2000 /* receive FIFO overflow */ +#define RX2MATCH 0x1000 /* receive compare byte 2 match */ +#define RX1MATCH 0x0800 /* receive compare byte 1 match */ +#define RXBREAK 0x0400 /* received BREAK */ +#define RXFRAME 0x0200 /* received framing error */ +#define RXPARITY 0x0100 /* received parity error */ +#define STATERROR (RXBREAK | RXFRAME | RXPARITY) + +#define CTSFC_EN 0x80 /* CTS flow control enable bit */ +#define RTSTOG_EN 0x40 /* RTS toggle enable bit */ +#define TXINT_EN 0x10 /* transmit interrupt enable */ +#define STOP2 0x08 /* enable 2 stop bits (0 = 1 stop) */ +#define PARITY_EN 0x04 /* enable parity (0 = no parity) */ +#define EVEN_PAR 0x02 /* even parity (0 = odd parity) */ +#define DATA8BIT 0x01 /* 8 bit data (0 = 7 bit data) */ + +#define SETBREAK 0x10 /* send break condition (must clear) */ +#define LOCALLOOP 0x08 /* local loopback set for test */ +#define SET_DTR 0x04 /* assert DTR */ +#define SET_RTS 0x02 /* assert RTS */ +#define TX_ENABLE 0x01 /* enable transmitter */ + +#define RTSFC_EN 0x40 /* RTS flow control enable */ +#define RXPROC_EN 0x20 /* receive processor enable */ +#define TRIG_NO 0x00 /* Rx FIFO trigger level 0 (no trigger) */ +#define TRIG_1 0x08 /* trigger level 1 char */ +#define TRIG_1_2 0x10 /* trigger level 1/2 */ +#define TRIG_7_8 0x18 /* trigger level 7/8 */ +#define TRIG_MASK 0x18 /* trigger level mask */ +#define SRCINT_EN 0x04 /* special Rx condition interrupt enable */ +#define RXINT_EN 0x02 /* Rx interrupt enable */ +#define MCINT_EN 0x01 /* modem change interrupt enable */ + +#define RXF_TRIG 0x20 /* Rx FIFO trigger level interrupt */ +#define TXFIFO_MT 0x10 /* Tx FIFO empty interrupt */ +#define SRC_INT 0x08 /* special receive condition interrupt */ +#define DELTA_CD 0x04 /* CD change interrupt */ +#define DELTA_CTS 0x02 /* CTS change interrupt */ +#define DELTA_DSR 0x01 /* DSR change interrupt */ + +#define REP1W2_EN 0x10 /* replace byte 1 with 2 bytes enable */ +#define IGN2_EN 0x08 /* ignore byte 2 enable */ +#define IGN1_EN 0x04 /* ignore byte 1 enable */ +#define COMP2_EN 0x02 /* compare byte 2 enable */ +#define COMP1_EN 0x01 /* compare byte 1 enable */ + +#define RESET_ALL 0x80 /* reset AIOP (all channels) */ +#define TXOVERIDE 0x40 /* Transmit software off override */ +#define RESETUART 0x20 /* reset channel's UART */ +#define RESTXFCNT 0x10 /* reset channel's Tx FIFO count register */ +#define RESRXFCNT 0x08 /* reset channel's Rx FIFO count register */ + +#define INTSTAT0 0x01 /* AIOP 0 interrupt status */ +#define INTSTAT1 0x02 /* AIOP 1 interrupt status */ +#define INTSTAT2 0x04 /* AIOP 2 interrupt status */ +#define INTSTAT3 0x08 /* AIOP 3 interrupt status */ + +#define INTR_EN 0x08 /* allow interrupts to host */ +#define INT_STROB 0x04 /* strobe and clear interrupt line (EOI) */ + +/************************************************************************** + MUDBAC remapped for PCI +**************************************************************************/ + +#define _CFG_INT_PCI 0x40 +#define _PCI_INT_FUNC 0x3A + +#define PCI_STROB 0x2000 /* bit 13 of int aiop register */ +#define INTR_EN_PCI 0x0010 /* allow interrupts to host */ + +/* + * Definitions for Universal PCI board registers + */ +#define _PCI_9030_INT_CTRL 0x4c /* Offsets from BAR1 */ +#define _PCI_9030_GPIO_CTRL 0x54 +#define PCI_INT_CTRL_AIOP 0x0001 +#define PCI_GPIO_CTRL_8PORT 0x4000 +#define _PCI_9030_RING_IND 0xc0 /* Offsets from BAR1 */ + +#define CHAN3_EN 0x08 /* enable AIOP 3 */ +#define CHAN2_EN 0x04 /* enable AIOP 2 */ +#define CHAN1_EN 0x02 /* enable AIOP 1 */ +#define CHAN0_EN 0x01 /* enable AIOP 0 */ +#define FREQ_DIS 0x00 +#define FREQ_274HZ 0x60 +#define FREQ_137HZ 0x50 +#define FREQ_69HZ 0x40 +#define FREQ_34HZ 0x30 +#define FREQ_17HZ 0x20 +#define FREQ_9HZ 0x10 +#define PERIODIC_ONLY 0x80 /* only PERIODIC interrupt */ + +#define CHANINT_EN 0x0100 /* flags to enable/disable channel ints */ + +#define RDATASIZE 72 +#define RREGDATASIZE 52 + +/* + * AIOP interrupt bits for ISA/PCI boards and UPCI boards. + */ +#define AIOP_INTR_BIT_0 0x0001 +#define AIOP_INTR_BIT_1 0x0002 +#define AIOP_INTR_BIT_2 0x0004 +#define AIOP_INTR_BIT_3 0x0008 + +#define AIOP_INTR_BITS ( \ + AIOP_INTR_BIT_0 \ + | AIOP_INTR_BIT_1 \ + | AIOP_INTR_BIT_2 \ + | AIOP_INTR_BIT_3) + +#define UPCI_AIOP_INTR_BIT_0 0x0004 +#define UPCI_AIOP_INTR_BIT_1 0x0020 +#define UPCI_AIOP_INTR_BIT_2 0x0100 +#define UPCI_AIOP_INTR_BIT_3 0x0800 + +#define UPCI_AIOP_INTR_BITS ( \ + UPCI_AIOP_INTR_BIT_0 \ + | UPCI_AIOP_INTR_BIT_1 \ + | UPCI_AIOP_INTR_BIT_2 \ + | UPCI_AIOP_INTR_BIT_3) + +/* Controller level information structure */ +typedef struct { + int CtlID; + int CtlNum; + int BusType; + int boardType; + int isUPCI; + WordIO_t PCIIO; + WordIO_t PCIIO2; + ByteIO_t MBaseIO; + ByteIO_t MReg1IO; + ByteIO_t MReg2IO; + ByteIO_t MReg3IO; + Byte_t MReg2; + Byte_t MReg3; + int NumAiop; + int AltChanRingIndicator; + ByteIO_t UPCIRingInd; + WordIO_t AiopIO[AIOP_CTL_SIZE]; + ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE]; + int AiopID[AIOP_CTL_SIZE]; + int AiopNumChan[AIOP_CTL_SIZE]; + Word_t *AiopIntrBits; +} CONTROLLER_T; + +typedef CONTROLLER_T CONTROLLER_t; + +/* Channel level information structure */ +typedef struct { + CONTROLLER_T *CtlP; + int AiopNum; + int ChanID; + int ChanNum; + int rtsToggle; + + ByteIO_t Cmd; + ByteIO_t IntChan; + ByteIO_t IntMask; + DWordIO_t IndexAddr; + WordIO_t IndexData; + + WordIO_t TxRxData; + WordIO_t ChanStat; + WordIO_t TxRxCount; + ByteIO_t IntID; + + Word_t TxFIFO; + Word_t TxFIFOPtrs; + Word_t RxFIFO; + Word_t RxFIFOPtrs; + Word_t TxPrioCnt; + Word_t TxPrioPtr; + Word_t TxPrioBuf; + + Byte_t R[RREGDATASIZE]; + + Byte_t BaudDiv[4]; + Byte_t TxControl[4]; + Byte_t RxControl[4]; + Byte_t TxEnables[4]; + Byte_t TxCompare[4]; + Byte_t TxReplace1[4]; + Byte_t TxReplace2[4]; +} CHANNEL_T; + +typedef CHANNEL_T CHANNEL_t; +typedef CHANNEL_T *CHANPTR_T; + +#define InterfaceModeRS232 0x00 +#define InterfaceModeRS422 0x08 +#define InterfaceModeRS485 0x10 +#define InterfaceModeRS232T 0x18 + +/*************************************************************************** +Function: sClrBreak +Purpose: Stop sending a transmit BREAK signal +Call: sClrBreak(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrBreak(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~SETBREAK; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sClrDTR +Purpose: Clr the DTR output +Call: sClrDTR(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrDTR(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~SET_DTR; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sClrRTS +Purpose: Clr the RTS output +Call: sClrRTS(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrRTS(ChP) \ +do { \ + if ((ChP)->rtsToggle) break; \ + (ChP)->TxControl[3] &= ~SET_RTS; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sClrTxXOFF +Purpose: Clear any existing transmit software flow control off condition +Call: sClrTxXOFF(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrTxXOFF(ChP) \ +do { \ + sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \ + sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \ +} while (0) + +/*************************************************************************** +Function: sCtlNumToCtlPtr +Purpose: Convert a controller number to controller structure pointer +Call: sCtlNumToCtlPtr(CtlNum) + int CtlNum; Controller number +Return: CONTROLLER_T *: Ptr to controller structure +*/ +#define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM] + +/*************************************************************************** +Function: sControllerEOI +Purpose: Strobe the MUDBAC's End Of Interrupt bit. +Call: sControllerEOI(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +*/ +#define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB) + +/*************************************************************************** +Function: sPCIControllerEOI +Purpose: Strobe the PCI End Of Interrupt bit. + For the UPCI boards, toggle the AIOP interrupt enable bit + (this was taken from the Windows driver). +Call: sPCIControllerEOI(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +*/ +#define sPCIControllerEOI(CTLP) \ +do { \ + if ((CTLP)->isUPCI) { \ + Word_t w = sInW((CTLP)->PCIIO); \ + sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \ + sOutW((CTLP)->PCIIO, w); \ + } \ + else { \ + sOutW((CTLP)->PCIIO, PCI_STROB); \ + } \ +} while (0) + +/*************************************************************************** +Function: sDisAiop +Purpose: Disable I/O access to an AIOP +Call: sDisAiop(CltP) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; Number of AIOP on controller +*/ +#define sDisAiop(CTLP,AIOPNUM) \ +do { \ + (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \ + sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ +} while (0) + +/*************************************************************************** +Function: sDisCTSFlowCtl +Purpose: Disable output flow control using CTS +Call: sDisCTSFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisCTSFlowCtl(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~CTSFC_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sDisIXANY +Purpose: Disable IXANY Software Flow Control +Call: sDisIXANY(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisIXANY(ChP) \ +do { \ + (ChP)->R[0x0e] = 0x86; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \ +} while (0) + +/*************************************************************************** +Function: DisParity +Purpose: Disable parity +Call: sDisParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). +*/ +#define sDisParity(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~PARITY_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sDisRTSToggle +Purpose: Disable RTS toggle +Call: sDisRTSToggle(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisRTSToggle(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~RTSTOG_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ + (ChP)->rtsToggle = 0; \ +} while (0) + +/*************************************************************************** +Function: sDisRxFIFO +Purpose: Disable Rx FIFO +Call: sDisRxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisRxFIFO(ChP) \ +do { \ + (ChP)->R[0x32] = 0x0a; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \ +} while (0) + +/*************************************************************************** +Function: sDisRxStatusMode +Purpose: Disable the Rx status mode +Call: sDisRxStatusMode(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This takes the channel out of the receive status mode. All + subsequent reads of receive data using sReadRxWord() will return + two data bytes. +*/ +#define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0) + +/*************************************************************************** +Function: sDisTransmit +Purpose: Disable transmit +Call: sDisTransmit(ChP) + CHANNEL_T *ChP; Ptr to channel structure + This disables movement of Tx data from the Tx FIFO into the 1 byte + Tx buffer. Therefore there could be up to a 2 byte latency + between the time sDisTransmit() is called and the transmit buffer + and transmit shift register going completely empty. +*/ +#define sDisTransmit(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~TX_ENABLE; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sDisTxSoftFlowCtl +Purpose: Disable Tx Software Flow Control +Call: sDisTxSoftFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisTxSoftFlowCtl(ChP) \ +do { \ + (ChP)->R[0x06] = 0x8a; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sEnAiop +Purpose: Enable I/O access to an AIOP +Call: sEnAiop(CltP) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; Number of AIOP on controller +*/ +#define sEnAiop(CTLP,AIOPNUM) \ +do { \ + (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \ + sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ +} while (0) + +/*************************************************************************** +Function: sEnCTSFlowCtl +Purpose: Enable output flow control using CTS +Call: sEnCTSFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnCTSFlowCtl(ChP) \ +do { \ + (ChP)->TxControl[2] |= CTSFC_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sEnIXANY +Purpose: Enable IXANY Software Flow Control +Call: sEnIXANY(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnIXANY(ChP) \ +do { \ + (ChP)->R[0x0e] = 0x21; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \ +} while (0) + +/*************************************************************************** +Function: EnParity +Purpose: Enable parity +Call: sEnParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: Before enabling parity odd or even parity should be chosen using + functions sSetOddParity() or sSetEvenParity(). +*/ +#define sEnParity(ChP) \ +do { \ + (ChP)->TxControl[2] |= PARITY_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sEnRTSToggle +Purpose: Enable RTS toggle +Call: sEnRTSToggle(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function will disable RTS flow control and clear the RTS + line to allow operation of RTS toggle. +*/ +#define sEnRTSToggle(ChP) \ +do { \ + (ChP)->RxControl[2] &= ~RTSFC_EN; \ + out32((ChP)->IndexAddr,(ChP)->RxControl); \ + (ChP)->TxControl[2] |= RTSTOG_EN; \ + (ChP)->TxControl[3] &= ~SET_RTS; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ + (ChP)->rtsToggle = 1; \ +} while (0) + +/*************************************************************************** +Function: sEnRxFIFO +Purpose: Enable Rx FIFO +Call: sEnRxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnRxFIFO(ChP) \ +do { \ + (ChP)->R[0x32] = 0x08; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \ +} while (0) + +/*************************************************************************** +Function: sEnRxProcessor +Purpose: Enable the receive processor +Call: sEnRxProcessor(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function is used to start the receive processor. When + the channel is in the reset state the receive processor is not + running. This is done to prevent the receive processor from + executing invalid microcode instructions prior to the + downloading of the microcode. + +Warnings: This function must be called after valid microcode has been + downloaded to the AIOP, and it must not be called before the + microcode has been downloaded. +*/ +#define sEnRxProcessor(ChP) \ +do { \ + (ChP)->RxControl[2] |= RXPROC_EN; \ + out32((ChP)->IndexAddr,(ChP)->RxControl); \ +} while (0) + +/*************************************************************************** +Function: sEnRxStatusMode +Purpose: Enable the Rx status mode +Call: sEnRxStatusMode(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This places the channel in the receive status mode. All subsequent + reads of receive data using sReadRxWord() will return a data byte + in the low word and a status byte in the high word. + +*/ +#define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE) + +/*************************************************************************** +Function: sEnTransmit +Purpose: Enable transmit +Call: sEnTransmit(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnTransmit(ChP) \ +do { \ + (ChP)->TxControl[3] |= TX_ENABLE; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sEnTxSoftFlowCtl +Purpose: Enable Tx Software Flow Control +Call: sEnTxSoftFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnTxSoftFlowCtl(ChP) \ +do { \ + (ChP)->R[0x06] = 0xc5; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sGetAiopIntStatus +Purpose: Get the AIOP interrupt status +Call: sGetAiopIntStatus(CtlP,AiopNum) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; AIOP number +Return: Byte_t: The AIOP interrupt status. Bits 0 through 7 + represent channels 0 through 7 respectively. If a + bit is set that channel is interrupting. +*/ +#define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM]) + +/*************************************************************************** +Function: sGetAiopNumChan +Purpose: Get the number of channels supported by an AIOP +Call: sGetAiopNumChan(CtlP,AiopNum) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; AIOP number +Return: int: The number of channels supported by the AIOP +*/ +#define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM] + +/*************************************************************************** +Function: sGetChanIntID +Purpose: Get a channel's interrupt identification byte +Call: sGetChanIntID(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The channel interrupt ID. Can be any + combination of the following flags: + RXF_TRIG: Rx FIFO trigger level interrupt + TXFIFO_MT: Tx FIFO empty interrupt + SRC_INT: Special receive condition interrupt + DELTA_CD: CD change interrupt + DELTA_CTS: CTS change interrupt + DELTA_DSR: DSR change interrupt +*/ +#define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR)) + +/*************************************************************************** +Function: sGetChanNum +Purpose: Get the number of a channel within an AIOP +Call: sGetChanNum(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: int: Channel number within AIOP, or NULLCHAN if channel does + not exist. +*/ +#define sGetChanNum(ChP) (ChP)->ChanNum + +/*************************************************************************** +Function: sGetChanStatus +Purpose: Get the channel status +Call: sGetChanStatus(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Word_t: The channel status. Can be any combination of + the following flags: + LOW BYTE FLAGS + CTS_ACT: CTS input asserted + DSR_ACT: DSR input asserted + CD_ACT: CD input asserted + TXFIFOMT: Tx FIFO is empty + TXSHRMT: Tx shift register is empty + RDA: Rx data available + + HIGH BYTE FLAGS + STATMODE: status mode enable bit + RXFOVERFL: receive FIFO overflow + RX2MATCH: receive compare byte 2 match + RX1MATCH: receive compare byte 1 match + RXBREAK: received BREAK + RXFRAME: received framing error + RXPARITY: received parity error +Warnings: This function will clear the high byte flags in the Channel + Status Register. +*/ +#define sGetChanStatus(ChP) sInW((ChP)->ChanStat) + +/*************************************************************************** +Function: sGetChanStatusLo +Purpose: Get the low byte only of the channel status +Call: sGetChanStatusLo(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The channel status low byte. Can be any combination + of the following flags: + CTS_ACT: CTS input asserted + DSR_ACT: DSR input asserted + CD_ACT: CD input asserted + TXFIFOMT: Tx FIFO is empty + TXSHRMT: Tx shift register is empty + RDA: Rx data available +*/ +#define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat) + +/********************************************************************** + * Get RI status of channel + * Defined as a function in rocket.c -aes + */ +#if 0 +#define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \ + (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \ + (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \ + (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \ + 0)) +#endif + +/*************************************************************************** +Function: sGetControllerIntStatus +Purpose: Get the controller interrupt status +Call: sGetControllerIntStatus(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +Return: Byte_t: The controller interrupt status in the lower 4 + bits. Bits 0 through 3 represent AIOP's 0 + through 3 respectively. If a bit is set that + AIOP is interrupting. Bits 4 through 7 will + always be cleared. +*/ +#define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f) + +/*************************************************************************** +Function: sPCIGetControllerIntStatus +Purpose: Get the controller interrupt status +Call: sPCIGetControllerIntStatus(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +Return: unsigned char: The controller interrupt status in the lower 4 + bits and bit 4. Bits 0 through 3 represent AIOP's 0 + through 3 respectively. Bit 4 is set if the int + was generated from periodic. If a bit is set the + AIOP is interrupting. +*/ +#define sPCIGetControllerIntStatus(CTLP) \ + ((CTLP)->isUPCI ? \ + (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \ + ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS)) + +/*************************************************************************** + +Function: sGetRxCnt +Purpose: Get the number of data bytes in the Rx FIFO +Call: sGetRxCnt(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: int: The number of data bytes in the Rx FIFO. +Comments: Byte read of count register is required to obtain Rx count. + +*/ +#define sGetRxCnt(ChP) sInW((ChP)->TxRxCount) + +/*************************************************************************** +Function: sGetTxCnt +Purpose: Get the number of data bytes in the Tx FIFO +Call: sGetTxCnt(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The number of data bytes in the Tx FIFO. +Comments: Byte read of count register is required to obtain Tx count. + +*/ +#define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount) + +/***************************************************************************** +Function: sGetTxRxDataIO +Purpose: Get the I/O address of a channel's TxRx Data register +Call: sGetTxRxDataIO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: WordIO_t: I/O address of a channel's TxRx Data register +*/ +#define sGetTxRxDataIO(ChP) (ChP)->TxRxData + +/*************************************************************************** +Function: sInitChanDefaults +Purpose: Initialize a channel structure to it's default state. +Call: sInitChanDefaults(ChP) + CHANNEL_T *ChP; Ptr to the channel structure +Comments: This function must be called once for every channel structure + that exists before any other SSCI calls can be made. + +*/ +#define sInitChanDefaults(ChP) \ +do { \ + (ChP)->CtlP = NULLCTLPTR; \ + (ChP)->AiopNum = NULLAIOP; \ + (ChP)->ChanID = AIOPID_NULL; \ + (ChP)->ChanNum = NULLCHAN; \ +} while (0) + +/*************************************************************************** +Function: sResetAiopByNum +Purpose: Reset the AIOP by number +Call: sResetAiopByNum(CTLP,AIOPNUM) + CONTROLLER_T CTLP; Ptr to controller structure + AIOPNUM; AIOP index +*/ +#define sResetAiopByNum(CTLP,AIOPNUM) \ +do { \ + sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \ + sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \ +} while (0) + +/*************************************************************************** +Function: sSendBreak +Purpose: Send a transmit BREAK signal +Call: sSendBreak(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSendBreak(ChP) \ +do { \ + (ChP)->TxControl[3] |= SETBREAK; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetBaud +Purpose: Set baud rate +Call: sSetBaud(ChP,Divisor) + CHANNEL_T *ChP; Ptr to channel structure + Word_t Divisor; 16 bit baud rate divisor for channel +*/ +#define sSetBaud(ChP,DIVISOR) \ +do { \ + (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \ + (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \ + out32((ChP)->IndexAddr,(ChP)->BaudDiv); \ +} while (0) + +/*************************************************************************** +Function: sSetData7 +Purpose: Set data bits to 7 +Call: sSetData7(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetData7(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~DATA8BIT; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetData8 +Purpose: Set data bits to 8 +Call: sSetData8(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetData8(ChP) \ +do { \ + (ChP)->TxControl[2] |= DATA8BIT; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetDTR +Purpose: Set the DTR output +Call: sSetDTR(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetDTR(ChP) \ +do { \ + (ChP)->TxControl[3] |= SET_DTR; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetEvenParity +Purpose: Set even parity +Call: sSetEvenParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: This function has no effect unless parity is enabled with function + sEnParity(). +*/ +#define sSetEvenParity(ChP) \ +do { \ + (ChP)->TxControl[2] |= EVEN_PAR; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetOddParity +Purpose: Set odd parity +Call: sSetOddParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: This function has no effect unless parity is enabled with function + sEnParity(). +*/ +#define sSetOddParity(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~EVEN_PAR; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetRTS +Purpose: Set the RTS output +Call: sSetRTS(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetRTS(ChP) \ +do { \ + if ((ChP)->rtsToggle) break; \ + (ChP)->TxControl[3] |= SET_RTS; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetRxTrigger +Purpose: Set the Rx FIFO trigger level +Call: sSetRxProcessor(ChP,Level) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Level; Number of characters in Rx FIFO at which the + interrupt will be generated. Can be any of the following flags: + + TRIG_NO: no trigger + TRIG_1: 1 character in FIFO + TRIG_1_2: FIFO 1/2 full + TRIG_7_8: FIFO 7/8 full +Comments: An interrupt will be generated when the trigger level is reached + only if function sEnInterrupt() has been called with flag + RXINT_EN set. The RXF_TRIG flag in the Interrupt Idenfification + register will be set whenever the trigger level is reached + regardless of the setting of RXINT_EN. + +*/ +#define sSetRxTrigger(ChP,LEVEL) \ +do { \ + (ChP)->RxControl[2] &= ~TRIG_MASK; \ + (ChP)->RxControl[2] |= LEVEL; \ + out32((ChP)->IndexAddr,(ChP)->RxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetStop1 +Purpose: Set stop bits to 1 +Call: sSetStop1(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetStop1(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~STOP2; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetStop2 +Purpose: Set stop bits to 2 +Call: sSetStop2(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetStop2(ChP) \ +do { \ + (ChP)->TxControl[2] |= STOP2; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetTxXOFFChar +Purpose: Set the Tx XOFF flow control character +Call: sSetTxXOFFChar(ChP,Ch) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Ch; The value to set the Tx XOFF character to +*/ +#define sSetTxXOFFChar(ChP,CH) \ +do { \ + (ChP)->R[0x07] = (CH); \ + out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sSetTxXONChar +Purpose: Set the Tx XON flow control character +Call: sSetTxXONChar(ChP,Ch) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Ch; The value to set the Tx XON character to +*/ +#define sSetTxXONChar(ChP,CH) \ +do { \ + (ChP)->R[0x0b] = (CH); \ + out32((ChP)->IndexAddr,&(ChP)->R[0x08]); \ +} while (0) + +/*************************************************************************** +Function: sStartRxProcessor +Purpose: Start a channel's receive processor +Call: sStartRxProcessor(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function is used to start a Rx processor after it was + stopped with sStopRxProcessor() or sStopSWInFlowCtl(). It + will restart both the Rx processor and software input flow control. + +*/ +#define sStartRxProcessor(ChP) out32((ChP)->IndexAddr,&(ChP)->R[0]) + +/*************************************************************************** +Function: sWriteTxByte +Purpose: Write a transmit data byte to a channel. + ByteIO_t io: Channel transmit register I/O address. This can + be obtained with sGetTxRxDataIO(). + Byte_t Data; The transmit data byte. +Warnings: This function writes the data byte without checking to see if + sMaxTxSize is exceeded in the Tx FIFO. +*/ +#define sWriteTxByte(IO,DATA) sOutB(IO,DATA) + +/* + * Begin Linux specific definitions for the Rocketport driver + * + * This code is Copyright Theodore Ts'o, 1995-1997 + */ + +struct r_port { + int magic; + struct tty_port port; + int line; + int flags; /* Don't yet match the ASY_ flags!! */ + unsigned int board:3; + unsigned int aiop:2; + unsigned int chan:3; + CONTROLLER_t *ctlp; + CHANNEL_t channel; + int intmask; + int xmit_fifo_room; /* room in xmit fifo */ + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + int cd_status; + int ignore_status_mask; + int read_status_mask; + int cps; + + struct completion close_wait; /* Not yet matching the core */ + spinlock_t slock; + struct mutex write_mtx; +}; + +#define RPORT_MAGIC 0x525001 + +#define NUM_BOARDS 8 +#define MAX_RP_PORTS (32*NUM_BOARDS) + +/* + * The size of the xmit buffer is 1 page, or 4096 bytes + */ +#define XMIT_BUF_SIZE 4096 + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* + * Assigned major numbers for the Comtrol Rocketport + */ +#define TTY_ROCKET_MAJOR 46 +#define CUA_ROCKET_MAJOR 47 + +#ifdef PCI_VENDOR_ID_RP +#undef PCI_VENDOR_ID_RP +#undef PCI_DEVICE_ID_RP8OCTA +#undef PCI_DEVICE_ID_RP8INTF +#undef PCI_DEVICE_ID_RP16INTF +#undef PCI_DEVICE_ID_RP32INTF +#undef PCI_DEVICE_ID_URP8OCTA +#undef PCI_DEVICE_ID_URP8INTF +#undef PCI_DEVICE_ID_URP16INTF +#undef PCI_DEVICE_ID_CRP16INTF +#undef PCI_DEVICE_ID_URP32INTF +#endif + +/* Comtrol PCI Vendor ID */ +#define PCI_VENDOR_ID_RP 0x11fe + +/* Comtrol Device ID's */ +#define PCI_DEVICE_ID_RP32INTF 0x0001 /* Rocketport 32 port w/external I/F */ +#define PCI_DEVICE_ID_RP8INTF 0x0002 /* Rocketport 8 port w/external I/F */ +#define PCI_DEVICE_ID_RP16INTF 0x0003 /* Rocketport 16 port w/external I/F */ +#define PCI_DEVICE_ID_RP4QUAD 0x0004 /* Rocketport 4 port w/quad cable */ +#define PCI_DEVICE_ID_RP8OCTA 0x0005 /* Rocketport 8 port w/octa cable */ +#define PCI_DEVICE_ID_RP8J 0x0006 /* Rocketport 8 port w/RJ11 connectors */ +#define PCI_DEVICE_ID_RP4J 0x0007 /* Rocketport 4 port w/RJ11 connectors */ +#define PCI_DEVICE_ID_RP8SNI 0x0008 /* Rocketport 8 port w/ DB78 SNI (Siemens) connector */ +#define PCI_DEVICE_ID_RP16SNI 0x0009 /* Rocketport 16 port w/ DB78 SNI (Siemens) connector */ +#define PCI_DEVICE_ID_RPP4 0x000A /* Rocketport Plus 4 port */ +#define PCI_DEVICE_ID_RPP8 0x000B /* Rocketport Plus 8 port */ +#define PCI_DEVICE_ID_RP6M 0x000C /* RocketModem 6 port */ +#define PCI_DEVICE_ID_RP4M 0x000D /* RocketModem 4 port */ +#define PCI_DEVICE_ID_RP2_232 0x000E /* Rocketport Plus 2 port RS232 */ +#define PCI_DEVICE_ID_RP2_422 0x000F /* Rocketport Plus 2 port RS422 */ + +/* Universal PCI boards */ +#define PCI_DEVICE_ID_URP32INTF 0x0801 /* Rocketport UPCI 32 port w/external I/F */ +#define PCI_DEVICE_ID_URP8INTF 0x0802 /* Rocketport UPCI 8 port w/external I/F */ +#define PCI_DEVICE_ID_URP16INTF 0x0803 /* Rocketport UPCI 16 port w/external I/F */ +#define PCI_DEVICE_ID_URP8OCTA 0x0805 /* Rocketport UPCI 8 port w/octa cable */ +#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C /* Rocketmodem III 8 port */ +#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D /* Rocketmodem III 4 port */ + +/* Compact PCI device */ +#define PCI_DEVICE_ID_CRP16INTF 0x0903 /* Rocketport Compact PCI 16 port w/external I/F */ + diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c new file mode 100644 index 000000000000..18888d005a0a --- /dev/null +++ b/drivers/tty/synclink.c @@ -0,0 +1,8119 @@ +/* + * linux/drivers/char/synclink.c + * + * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $ + * + * Device driver for Microgate SyncLink ISA and PCI + * high speed multiprotocol serial adapters. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * Derived from serial.c written by Theodore Ts'o and Linus Torvalds + * + * Original release 01/11/99 + * + * This code is released under the GNU General Public License (GPL) + * + * This driver is primarily intended for use in synchronous + * HDLC mode. Asynchronous mode is also provided. + * + * When operating in synchronous mode, each call to mgsl_write() + * contains exactly one complete HDLC frame. Calling mgsl_put_char + * will start assembling an HDLC frame that will not be sent until + * mgsl_flush_chars or mgsl_write is called. + * + * Synchronous receive data is reported as complete frames. To accomplish + * this, the TTY flip buffer is bypassed (too small to hold largest + * frame and may fragment frames) and the line discipline + * receive entry point is called directly. + * + * This driver has been tested with a slightly modified ppp.c driver + * for synchronous PPP. + * + * 2000/02/16 + * Added interface for syncppp.c driver (an alternate synchronous PPP + * implementation that also supports Cisco HDLC). Each device instance + * registers as a tty device AND a network device (if dosyncppp option + * is set for the device). The functionality is determined by which + * device interface is opened. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if defined(__i386__) +# define BREAKPOINT() asm(" int $3"); +#else +# define BREAKPOINT() { } +#endif + +#define MAX_ISA_DEVICES 10 +#define MAX_PCI_DEVICES 10 +#define MAX_TOTAL_DEVICES 20 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE)) +#define SYNCLINK_GENERIC_HDLC 1 +#else +#define SYNCLINK_GENERIC_HDLC 0 +#endif + +#define GET_USER(error,value,addr) error = get_user(value,addr) +#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 +#define PUT_USER(error,value,addr) error = put_user(value,addr) +#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 + +#include + +#define RCLRVALUE 0xffff + +static MGSL_PARAMS default_params = { + MGSL_MODE_HDLC, /* unsigned long mode */ + 0, /* unsigned char loopback; */ + HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ + HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ + 0, /* unsigned long clock_speed; */ + 0xff, /* unsigned char addr_filter; */ + HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ + HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ + HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ + 9600, /* unsigned long data_rate; */ + 8, /* unsigned char data_bits; */ + 1, /* unsigned char stop_bits; */ + ASYNC_PARITY_NONE /* unsigned char parity; */ +}; + +#define SHARED_MEM_ADDRESS_SIZE 0x40000 +#define BUFFERLISTSIZE 4096 +#define DMABUFFERSIZE 4096 +#define MAXRXFRAMES 7 + +typedef struct _DMABUFFERENTRY +{ + u32 phys_addr; /* 32-bit flat physical address of data buffer */ + volatile u16 count; /* buffer size/data count */ + volatile u16 status; /* Control/status field */ + volatile u16 rcc; /* character count field */ + u16 reserved; /* padding required by 16C32 */ + u32 link; /* 32-bit flat link to next buffer entry */ + char *virt_addr; /* virtual address of data buffer */ + u32 phys_entry; /* physical address of this buffer entry */ + dma_addr_t dma_addr; +} DMABUFFERENTRY, *DMAPBUFFERENTRY; + +/* The queue of BH actions to be performed */ + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 + +#define IO_PIN_SHUTDOWN_LIMIT 100 + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* transmit holding buffer definitions*/ +#define MAX_TX_HOLDING_BUFFERS 5 +struct tx_holding_buffer { + int buffer_size; + unsigned char * buffer; +}; + + +/* + * Device instance data structure + */ + +struct mgsl_struct { + int magic; + struct tty_port port; + int line; + int hw_version; + + struct mgsl_icount icount; + + int timeout; + int x_char; /* xon/xoff character */ + u16 read_status_mask; + u16 ignore_status_mask; + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; /* HDLC transmit timeout timer */ + struct mgsl_struct *next_device; /* device list link */ + + spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */ + struct work_struct task; /* task structure for scheduling bh */ + + u32 EventMask; /* event trigger mask */ + u32 RecordedEvents; /* pending events */ + + u32 max_frame_size; /* as set by device config */ + + u32 pending_bh; + + bool bh_running; /* Protection from multiple */ + int isr_overflow; + bool bh_requested; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *buffer_list; /* virtual address of Rx & Tx buffer lists */ + u32 buffer_list_phys; + dma_addr_t buffer_list_dma_addr; + + unsigned int rx_buffer_count; /* count of total allocated Rx buffers */ + DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */ + unsigned int current_rx_buffer; + + int num_tx_dma_buffers; /* number of tx dma frames required */ + int tx_dma_buffers_used; + unsigned int tx_buffer_count; /* count of total allocated Tx buffers */ + DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */ + int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */ + int current_tx_buffer; /* next tx dma buffer to be loaded */ + + unsigned char *intermediate_rxbuffer; + + int num_tx_holding_buffers; /* number of tx holding buffer allocated */ + int get_tx_holding_index; /* next tx holding buffer for adapter to load */ + int put_tx_holding_index; /* next tx holding buffer to store user request */ + int tx_holding_count; /* number of tx holding buffers waiting */ + struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS]; + + bool rx_enabled; + bool rx_overflow; + bool rx_rcc_underrun; + + bool tx_enabled; + bool tx_active; + u32 idle_mode; + + u16 cmr_value; + u16 tcsr_value; + + char device_name[25]; /* device instance name */ + + unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ + unsigned char bus; /* expansion bus number (zero based) */ + unsigned char function; /* PCI device number */ + + unsigned int io_base; /* base I/O address of adapter */ + unsigned int io_addr_size; /* size of the I/O address range */ + bool io_addr_requested; /* true if I/O address requested */ + + unsigned int irq_level; /* interrupt level */ + unsigned long irq_flags; + bool irq_requested; /* true if IRQ requested */ + + unsigned int dma_level; /* DMA channel */ + bool dma_requested; /* true if dma channel requested */ + + u16 mbre_bit; + u16 loopback_bits; + u16 usc_idle_mode; + + MGSL_PARAMS params; /* communications parameters */ + + unsigned char serial_signals; /* current serial signal states */ + + bool irq_occurred; /* for diagnostics use */ + unsigned int init_error; /* Initialization startup error (DIAGS) */ + int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */ + + u32 last_mem_alloc; + unsigned char* memory_base; /* shared memory address (PCI only) */ + u32 phys_memory_base; + bool shared_mem_requested; + + unsigned char* lcr_base; /* local config registers (PCI only) */ + u32 phys_lcr_base; + u32 lcr_offset; + bool lcr_mem_requested; + + u32 misc_ctrl_value; + char flag_buf[MAX_ASYNC_BUFFER_SIZE]; + char char_buf[MAX_ASYNC_BUFFER_SIZE]; + bool drop_rts_on_tx_done; + + bool loopmode_insert_requested; + bool loopmode_send_done_requested; + + struct _input_signal_events input_signal_events; + + /* generic HDLC device parts */ + int netcount; + spinlock_t netlock; + +#if SYNCLINK_GENERIC_HDLC + struct net_device *netdev; +#endif +}; + +#define MGSL_MAGIC 0x5401 + +/* + * The size of the serial xmit buffer is 1 page, or 4096 bytes + */ +#ifndef SERIAL_XMIT_SIZE +#define SERIAL_XMIT_SIZE 4096 +#endif + +/* + * These macros define the offsets used in calculating the + * I/O address of the specified USC registers. + */ + + +#define DCPIN 2 /* Bit 1 of I/O address */ +#define SDPIN 4 /* Bit 2 of I/O address */ + +#define DCAR 0 /* DMA command/address register */ +#define CCAR SDPIN /* channel command/address register */ +#define DATAREG DCPIN + SDPIN /* serial data register */ +#define MSBONLY 0x41 +#define LSBONLY 0x40 + +/* + * These macros define the register address (ordinal number) + * used for writing address/value pairs to the USC. + */ + +#define CMR 0x02 /* Channel mode Register */ +#define CCSR 0x04 /* Channel Command/status Register */ +#define CCR 0x06 /* Channel Control Register */ +#define PSR 0x08 /* Port status Register */ +#define PCR 0x0a /* Port Control Register */ +#define TMDR 0x0c /* Test mode Data Register */ +#define TMCR 0x0e /* Test mode Control Register */ +#define CMCR 0x10 /* Clock mode Control Register */ +#define HCR 0x12 /* Hardware Configuration Register */ +#define IVR 0x14 /* Interrupt Vector Register */ +#define IOCR 0x16 /* Input/Output Control Register */ +#define ICR 0x18 /* Interrupt Control Register */ +#define DCCR 0x1a /* Daisy Chain Control Register */ +#define MISR 0x1c /* Misc Interrupt status Register */ +#define SICR 0x1e /* status Interrupt Control Register */ +#define RDR 0x20 /* Receive Data Register */ +#define RMR 0x22 /* Receive mode Register */ +#define RCSR 0x24 /* Receive Command/status Register */ +#define RICR 0x26 /* Receive Interrupt Control Register */ +#define RSR 0x28 /* Receive Sync Register */ +#define RCLR 0x2a /* Receive count Limit Register */ +#define RCCR 0x2c /* Receive Character count Register */ +#define TC0R 0x2e /* Time Constant 0 Register */ +#define TDR 0x30 /* Transmit Data Register */ +#define TMR 0x32 /* Transmit mode Register */ +#define TCSR 0x34 /* Transmit Command/status Register */ +#define TICR 0x36 /* Transmit Interrupt Control Register */ +#define TSR 0x38 /* Transmit Sync Register */ +#define TCLR 0x3a /* Transmit count Limit Register */ +#define TCCR 0x3c /* Transmit Character count Register */ +#define TC1R 0x3e /* Time Constant 1 Register */ + + +/* + * MACRO DEFINITIONS FOR DMA REGISTERS + */ + +#define DCR 0x06 /* DMA Control Register (shared) */ +#define DACR 0x08 /* DMA Array count Register (shared) */ +#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */ +#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */ +#define DICR 0x18 /* DMA Interrupt Control Register (shared) */ +#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */ +#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */ + +#define TDMR 0x02 /* Transmit DMA mode Register */ +#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */ +#define TBCR 0x2a /* Transmit Byte count Register */ +#define TARL 0x2c /* Transmit Address Register (low) */ +#define TARU 0x2e /* Transmit Address Register (high) */ +#define NTBCR 0x3a /* Next Transmit Byte count Register */ +#define NTARL 0x3c /* Next Transmit Address Register (low) */ +#define NTARU 0x3e /* Next Transmit Address Register (high) */ + +#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */ +#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */ +#define RBCR 0xaa /* Receive Byte count Register */ +#define RARL 0xac /* Receive Address Register (low) */ +#define RARU 0xae /* Receive Address Register (high) */ +#define NRBCR 0xba /* Next Receive Byte count Register */ +#define NRARL 0xbc /* Next Receive Address Register (low) */ +#define NRARU 0xbe /* Next Receive Address Register (high) */ + + +/* + * MACRO DEFINITIONS FOR MODEM STATUS BITS + */ + +#define MODEMSTATUS_DTR 0x80 +#define MODEMSTATUS_DSR 0x40 +#define MODEMSTATUS_RTS 0x20 +#define MODEMSTATUS_CTS 0x10 +#define MODEMSTATUS_RI 0x04 +#define MODEMSTATUS_DCD 0x01 + + +/* + * Channel Command/Address Register (CCAR) Command Codes + */ + +#define RTCmd_Null 0x0000 +#define RTCmd_ResetHighestIus 0x1000 +#define RTCmd_TriggerChannelLoadDma 0x2000 +#define RTCmd_TriggerRxDma 0x2800 +#define RTCmd_TriggerTxDma 0x3000 +#define RTCmd_TriggerRxAndTxDma 0x3800 +#define RTCmd_PurgeRxFifo 0x4800 +#define RTCmd_PurgeTxFifo 0x5000 +#define RTCmd_PurgeRxAndTxFifo 0x5800 +#define RTCmd_LoadRcc 0x6800 +#define RTCmd_LoadTcc 0x7000 +#define RTCmd_LoadRccAndTcc 0x7800 +#define RTCmd_LoadTC0 0x8800 +#define RTCmd_LoadTC1 0x9000 +#define RTCmd_LoadTC0AndTC1 0x9800 +#define RTCmd_SerialDataLSBFirst 0xa000 +#define RTCmd_SerialDataMSBFirst 0xa800 +#define RTCmd_SelectBigEndian 0xb000 +#define RTCmd_SelectLittleEndian 0xb800 + + +/* + * DMA Command/Address Register (DCAR) Command Codes + */ + +#define DmaCmd_Null 0x0000 +#define DmaCmd_ResetTxChannel 0x1000 +#define DmaCmd_ResetRxChannel 0x1200 +#define DmaCmd_StartTxChannel 0x2000 +#define DmaCmd_StartRxChannel 0x2200 +#define DmaCmd_ContinueTxChannel 0x3000 +#define DmaCmd_ContinueRxChannel 0x3200 +#define DmaCmd_PauseTxChannel 0x4000 +#define DmaCmd_PauseRxChannel 0x4200 +#define DmaCmd_AbortTxChannel 0x5000 +#define DmaCmd_AbortRxChannel 0x5200 +#define DmaCmd_InitTxChannel 0x7000 +#define DmaCmd_InitRxChannel 0x7200 +#define DmaCmd_ResetHighestDmaIus 0x8000 +#define DmaCmd_ResetAllChannels 0x9000 +#define DmaCmd_StartAllChannels 0xa000 +#define DmaCmd_ContinueAllChannels 0xb000 +#define DmaCmd_PauseAllChannels 0xc000 +#define DmaCmd_AbortAllChannels 0xd000 +#define DmaCmd_InitAllChannels 0xf000 + +#define TCmd_Null 0x0000 +#define TCmd_ClearTxCRC 0x2000 +#define TCmd_SelectTicrTtsaData 0x4000 +#define TCmd_SelectTicrTxFifostatus 0x5000 +#define TCmd_SelectTicrIntLevel 0x6000 +#define TCmd_SelectTicrdma_level 0x7000 +#define TCmd_SendFrame 0x8000 +#define TCmd_SendAbort 0x9000 +#define TCmd_EnableDleInsertion 0xc000 +#define TCmd_DisableDleInsertion 0xd000 +#define TCmd_ClearEofEom 0xe000 +#define TCmd_SetEofEom 0xf000 + +#define RCmd_Null 0x0000 +#define RCmd_ClearRxCRC 0x2000 +#define RCmd_EnterHuntmode 0x3000 +#define RCmd_SelectRicrRtsaData 0x4000 +#define RCmd_SelectRicrRxFifostatus 0x5000 +#define RCmd_SelectRicrIntLevel 0x6000 +#define RCmd_SelectRicrdma_level 0x7000 + +/* + * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR) + */ + +#define RECEIVE_STATUS BIT5 +#define RECEIVE_DATA BIT4 +#define TRANSMIT_STATUS BIT3 +#define TRANSMIT_DATA BIT2 +#define IO_PIN BIT1 +#define MISC BIT0 + + +/* + * Receive status Bits in Receive Command/status Register RCSR + */ + +#define RXSTATUS_SHORT_FRAME BIT8 +#define RXSTATUS_CODE_VIOLATION BIT8 +#define RXSTATUS_EXITED_HUNT BIT7 +#define RXSTATUS_IDLE_RECEIVED BIT6 +#define RXSTATUS_BREAK_RECEIVED BIT5 +#define RXSTATUS_ABORT_RECEIVED BIT5 +#define RXSTATUS_RXBOUND BIT4 +#define RXSTATUS_CRC_ERROR BIT3 +#define RXSTATUS_FRAMING_ERROR BIT3 +#define RXSTATUS_ABORT BIT2 +#define RXSTATUS_PARITY_ERROR BIT2 +#define RXSTATUS_OVERRUN BIT1 +#define RXSTATUS_DATA_AVAILABLE BIT0 +#define RXSTATUS_ALL 0x01f6 +#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) ) + +/* + * Values for setting transmit idle mode in + * Transmit Control/status Register (TCSR) + */ +#define IDLEMODE_FLAGS 0x0000 +#define IDLEMODE_ALT_ONE_ZERO 0x0100 +#define IDLEMODE_ZERO 0x0200 +#define IDLEMODE_ONE 0x0300 +#define IDLEMODE_ALT_MARK_SPACE 0x0500 +#define IDLEMODE_SPACE 0x0600 +#define IDLEMODE_MARK 0x0700 +#define IDLEMODE_MASK 0x0700 + +/* + * IUSC revision identifiers + */ +#define IUSC_SL1660 0x4d44 +#define IUSC_PRE_SL1660 0x4553 + +/* + * Transmit status Bits in Transmit Command/status Register (TCSR) + */ + +#define TCSR_PRESERVE 0x0F00 + +#define TCSR_UNDERWAIT BIT11 +#define TXSTATUS_PREAMBLE_SENT BIT7 +#define TXSTATUS_IDLE_SENT BIT6 +#define TXSTATUS_ABORT_SENT BIT5 +#define TXSTATUS_EOF_SENT BIT4 +#define TXSTATUS_EOM_SENT BIT4 +#define TXSTATUS_CRC_SENT BIT3 +#define TXSTATUS_ALL_SENT BIT2 +#define TXSTATUS_UNDERRUN BIT1 +#define TXSTATUS_FIFO_EMPTY BIT0 +#define TXSTATUS_ALL 0x00fa +#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) ) + + +#define MISCSTATUS_RXC_LATCHED BIT15 +#define MISCSTATUS_RXC BIT14 +#define MISCSTATUS_TXC_LATCHED BIT13 +#define MISCSTATUS_TXC BIT12 +#define MISCSTATUS_RI_LATCHED BIT11 +#define MISCSTATUS_RI BIT10 +#define MISCSTATUS_DSR_LATCHED BIT9 +#define MISCSTATUS_DSR BIT8 +#define MISCSTATUS_DCD_LATCHED BIT7 +#define MISCSTATUS_DCD BIT6 +#define MISCSTATUS_CTS_LATCHED BIT5 +#define MISCSTATUS_CTS BIT4 +#define MISCSTATUS_RCC_UNDERRUN BIT3 +#define MISCSTATUS_DPLL_NO_SYNC BIT2 +#define MISCSTATUS_BRG1_ZERO BIT1 +#define MISCSTATUS_BRG0_ZERO BIT0 + +#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0)) +#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f)) + +#define SICR_RXC_ACTIVE BIT15 +#define SICR_RXC_INACTIVE BIT14 +#define SICR_RXC (BIT15+BIT14) +#define SICR_TXC_ACTIVE BIT13 +#define SICR_TXC_INACTIVE BIT12 +#define SICR_TXC (BIT13+BIT12) +#define SICR_RI_ACTIVE BIT11 +#define SICR_RI_INACTIVE BIT10 +#define SICR_RI (BIT11+BIT10) +#define SICR_DSR_ACTIVE BIT9 +#define SICR_DSR_INACTIVE BIT8 +#define SICR_DSR (BIT9+BIT8) +#define SICR_DCD_ACTIVE BIT7 +#define SICR_DCD_INACTIVE BIT6 +#define SICR_DCD (BIT7+BIT6) +#define SICR_CTS_ACTIVE BIT5 +#define SICR_CTS_INACTIVE BIT4 +#define SICR_CTS (BIT5+BIT4) +#define SICR_RCC_UNDERFLOW BIT3 +#define SICR_DPLL_NO_SYNC BIT2 +#define SICR_BRG1_ZERO BIT1 +#define SICR_BRG0_ZERO BIT0 + +void usc_DisableMasterIrqBit( struct mgsl_struct *info ); +void usc_EnableMasterIrqBit( struct mgsl_struct *info ); +void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask ); +void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask ); +void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask ); + +#define usc_EnableInterrupts( a, b ) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) ) + +#define usc_DisableInterrupts( a, b ) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) ) + +#define usc_EnableMasterIrqBit(a) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) ) + +#define usc_DisableMasterIrqBit(a) \ + usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) ) + +#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) ) + +/* + * Transmit status Bits in Transmit Control status Register (TCSR) + * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) + */ + +#define TXSTATUS_PREAMBLE_SENT BIT7 +#define TXSTATUS_IDLE_SENT BIT6 +#define TXSTATUS_ABORT_SENT BIT5 +#define TXSTATUS_EOF BIT4 +#define TXSTATUS_CRC_SENT BIT3 +#define TXSTATUS_ALL_SENT BIT2 +#define TXSTATUS_UNDERRUN BIT1 +#define TXSTATUS_FIFO_EMPTY BIT0 + +#define DICR_MASTER BIT15 +#define DICR_TRANSMIT BIT0 +#define DICR_RECEIVE BIT1 + +#define usc_EnableDmaInterrupts(a,b) \ + usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) ) + +#define usc_DisableDmaInterrupts(a,b) \ + usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) ) + +#define usc_EnableStatusIrqs(a,b) \ + usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) ) + +#define usc_DisablestatusIrqs(a,b) \ + usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) ) + +/* Transmit status Bits in Transmit Control status Register (TCSR) */ +/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */ + + +#define DISABLE_UNCONDITIONAL 0 +#define DISABLE_END_OF_FRAME 1 +#define ENABLE_UNCONDITIONAL 2 +#define ENABLE_AUTO_CTS 3 +#define ENABLE_AUTO_DCD 3 +#define usc_EnableTransmitter(a,b) \ + usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) ) +#define usc_EnableReceiver(a,b) \ + usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) ) + +static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port ); +static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value ); +static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ); + +static u16 usc_InReg( struct mgsl_struct *info, u16 Port ); +static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value ); +static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ); +void usc_RCmd( struct mgsl_struct *info, u16 Cmd ); +void usc_TCmd( struct mgsl_struct *info, u16 Cmd ); + +#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b))) +#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b)) + +#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1)) + +static void usc_process_rxoverrun_sync( struct mgsl_struct *info ); +static void usc_start_receiver( struct mgsl_struct *info ); +static void usc_stop_receiver( struct mgsl_struct *info ); + +static void usc_start_transmitter( struct mgsl_struct *info ); +static void usc_stop_transmitter( struct mgsl_struct *info ); +static void usc_set_txidle( struct mgsl_struct *info ); +static void usc_load_txfifo( struct mgsl_struct *info ); + +static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate ); +static void usc_enable_loopback( struct mgsl_struct *info, int enable ); + +static void usc_get_serial_signals( struct mgsl_struct *info ); +static void usc_set_serial_signals( struct mgsl_struct *info ); + +static void usc_reset( struct mgsl_struct *info ); + +static void usc_set_sync_mode( struct mgsl_struct *info ); +static void usc_set_sdlc_mode( struct mgsl_struct *info ); +static void usc_set_async_mode( struct mgsl_struct *info ); +static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate ); + +static void usc_loopback_frame( struct mgsl_struct *info ); + +static void mgsl_tx_timeout(unsigned long context); + + +static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ); +static void usc_loopmode_insert_request( struct mgsl_struct * info ); +static int usc_loopmode_active( struct mgsl_struct * info); +static void usc_loopmode_send_done( struct mgsl_struct * info ); + +static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg); + +#if SYNCLINK_GENERIC_HDLC +#define dev_to_port(D) (dev_to_hdlc(D)->priv) +static void hdlcdev_tx_done(struct mgsl_struct *info); +static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size); +static int hdlcdev_init(struct mgsl_struct *info); +static void hdlcdev_exit(struct mgsl_struct *info); +#endif + +/* + * Defines a BUS descriptor value for the PCI adapter + * local bus address ranges. + */ + +#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \ +(0x00400020 + \ +((WrHold) << 30) + \ +((WrDly) << 28) + \ +((RdDly) << 26) + \ +((Nwdd) << 20) + \ +((Nwad) << 15) + \ +((Nxda) << 13) + \ +((Nrdd) << 11) + \ +((Nrad) << 6) ) + +static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit); + +/* + * Adapter diagnostic routines + */ +static bool mgsl_register_test( struct mgsl_struct *info ); +static bool mgsl_irq_test( struct mgsl_struct *info ); +static bool mgsl_dma_test( struct mgsl_struct *info ); +static bool mgsl_memory_test( struct mgsl_struct *info ); +static int mgsl_adapter_test( struct mgsl_struct *info ); + +/* + * device and resource management routines + */ +static int mgsl_claim_resources(struct mgsl_struct *info); +static void mgsl_release_resources(struct mgsl_struct *info); +static void mgsl_add_device(struct mgsl_struct *info); +static struct mgsl_struct* mgsl_allocate_device(void); + +/* + * DMA buffer manupulation functions. + */ +static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ); +static bool mgsl_get_rx_frame( struct mgsl_struct *info ); +static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info ); +static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ); +static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ); +static int num_free_tx_dma_buffers(struct mgsl_struct *info); +static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize); +static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count); + +/* + * DMA and Shared Memory buffer allocation and formatting + */ +static int mgsl_allocate_dma_buffers(struct mgsl_struct *info); +static void mgsl_free_dma_buffers(struct mgsl_struct *info); +static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); +static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); +static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info); +static void mgsl_free_buffer_list_memory(struct mgsl_struct *info); +static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info); +static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info); +static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info); +static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info); +static bool load_next_tx_holding_buffer(struct mgsl_struct *info); +static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize); + +/* + * Bottom half interrupt handlers + */ +static void mgsl_bh_handler(struct work_struct *work); +static void mgsl_bh_receive(struct mgsl_struct *info); +static void mgsl_bh_transmit(struct mgsl_struct *info); +static void mgsl_bh_status(struct mgsl_struct *info); + +/* + * Interrupt handler routines and dispatch table. + */ +static void mgsl_isr_null( struct mgsl_struct *info ); +static void mgsl_isr_transmit_data( struct mgsl_struct *info ); +static void mgsl_isr_receive_data( struct mgsl_struct *info ); +static void mgsl_isr_receive_status( struct mgsl_struct *info ); +static void mgsl_isr_transmit_status( struct mgsl_struct *info ); +static void mgsl_isr_io_pin( struct mgsl_struct *info ); +static void mgsl_isr_misc( struct mgsl_struct *info ); +static void mgsl_isr_receive_dma( struct mgsl_struct *info ); +static void mgsl_isr_transmit_dma( struct mgsl_struct *info ); + +typedef void (*isr_dispatch_func)(struct mgsl_struct *); + +static isr_dispatch_func UscIsrTable[7] = +{ + mgsl_isr_null, + mgsl_isr_misc, + mgsl_isr_io_pin, + mgsl_isr_transmit_data, + mgsl_isr_transmit_status, + mgsl_isr_receive_data, + mgsl_isr_receive_status +}; + +/* + * ioctl call handlers + */ +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount + __user *user_icount); +static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params); +static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params); +static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode); +static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode); +static int mgsl_txenable(struct mgsl_struct * info, int enable); +static int mgsl_txabort(struct mgsl_struct * info); +static int mgsl_rxenable(struct mgsl_struct * info, int enable); +static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask); +static int mgsl_loopmode_send_done( struct mgsl_struct * info ); + +/* set non-zero on successful registration with PCI subsystem */ +static bool pci_registered; + +/* + * Global linked list of SyncLink devices + */ +static struct mgsl_struct *mgsl_device_list; +static int mgsl_device_count; + +/* + * Set this param to non-zero to load eax with the + * .text section address and breakpoint on module load. + * This is useful for use with gdb and add-symbol-file command. + */ +static int break_on_load; + +/* + * Driver major number, defaults to zero to get auto + * assigned major number. May be forced as module parameter. + */ +static int ttymajor; + +/* + * Array of user specified options for ISA adapters. + */ +static int io[MAX_ISA_DEVICES]; +static int irq[MAX_ISA_DEVICES]; +static int dma[MAX_ISA_DEVICES]; +static int debug_level; +static int maxframe[MAX_TOTAL_DEVICES]; +static int txdmabufs[MAX_TOTAL_DEVICES]; +static int txholdbufs[MAX_TOTAL_DEVICES]; + +module_param(break_on_load, bool, 0); +module_param(ttymajor, int, 0); +module_param_array(io, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +module_param_array(dma, int, NULL, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); +module_param_array(txdmabufs, int, NULL, 0); +module_param_array(txholdbufs, int, NULL, 0); + +static char *driver_name = "SyncLink serial driver"; +static char *driver_version = "$Revision: 4.38 $"; + +static int synclink_init_one (struct pci_dev *dev, + const struct pci_device_id *ent); +static void synclink_remove_one (struct pci_dev *dev); + +static struct pci_device_id synclink_pci_tbl[] = { + { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, }, + { 0, }, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, synclink_pci_tbl); + +MODULE_LICENSE("GPL"); + +static struct pci_driver synclink_pci_driver = { + .name = "synclink", + .id_table = synclink_pci_tbl, + .probe = synclink_init_one, + .remove = __devexit_p(synclink_remove_one), +}; + +static struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + + +static void mgsl_change_params(struct mgsl_struct *info); +static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout); + +/* + * 1st function defined in .text section. Calling this function in + * init_module() followed by a breakpoint allows a remote debugger + * (gdb) to get the .text address for the add-symbol-file command. + * This allows remote debugging of dynamically loadable modules. + */ +static void* mgsl_get_text_ptr(void) +{ + return mgsl_get_text_ptr; +} + +static inline int mgsl_paranoia_check(struct mgsl_struct *info, + char *name, const char *routine) +{ +#ifdef MGSL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for mgsl struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null mgsl_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/** + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ + +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->receive_buf) + ld->ops->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* mgsl_stop() throttle (stop) transmitter + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_stop(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_stop")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("mgsl_stop(%s)\n",info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (info->tx_enabled) + usc_stop_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_stop() */ + +/* mgsl_start() release (start) transmitter + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_start(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_start")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("mgsl_start(%s)\n",info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_enabled) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_start() */ + +/* + * Bottom half work queue access functions + */ + +/* mgsl_bh_action() Return next bottom half action to perform. + * Return Value: BH action code or 0 if nothing to do. + */ +static int mgsl_bh_action(struct mgsl_struct *info) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&info->irq_spinlock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } + + if (!rc) { + /* Mark BH routine as complete */ + info->bh_running = false; + info->bh_requested = false; + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return rc; +} + +/* + * Perform bottom half processing of work items queued by ISR. + */ +static void mgsl_bh_handler(struct work_struct *work) +{ + struct mgsl_struct *info = + container_of(work, struct mgsl_struct, task); + int action; + + if (!info) + return; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler(%s) entry\n", + __FILE__,__LINE__,info->device_name); + + info->bh_running = true; + + while((action = mgsl_bh_action(info)) != 0) { + + /* Process work item */ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler() work item action=%d\n", + __FILE__,__LINE__,action); + + switch (action) { + + case BH_RECEIVE: + mgsl_bh_receive(info); + break; + case BH_TRANSMIT: + mgsl_bh_transmit(info); + break; + case BH_STATUS: + mgsl_bh_status(info); + break; + default: + /* unknown work item ID */ + printk("Unknown work item ID=%08X!\n", action); + break; + } + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler(%s) exit\n", + __FILE__,__LINE__,info->device_name); +} + +static void mgsl_bh_receive(struct mgsl_struct *info) +{ + bool (*get_rx_frame)(struct mgsl_struct *info) = + (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame); + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_receive(%s)\n", + __FILE__,__LINE__,info->device_name); + + do + { + if (info->rx_rcc_underrun) { + unsigned long flags; + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return; + } + } while(get_rx_frame(info)); +} + +static void mgsl_bh_transmit(struct mgsl_struct *info) +{ + struct tty_struct *tty = info->port.tty; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_transmit() entry on %s\n", + __FILE__,__LINE__,info->device_name); + + if (tty) + tty_wakeup(tty); + + /* if transmitter idle and loopmode_send_done_requested + * then start echoing RxD to TxD + */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( !info->tx_active && info->loopmode_send_done_requested ) + usc_loopmode_send_done( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + +static void mgsl_bh_status(struct mgsl_struct *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_status() entry on %s\n", + __FILE__,__LINE__,info->device_name); + + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; +} + +/* mgsl_isr_receive_status() + * + * Service a receive status interrupt. The type of status + * interrupt is indicated by the state of the RCSR. + * This is only used for HDLC mode. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_status( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, RCSR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_status status=%04X\n", + __FILE__,__LINE__,status); + + if ( (status & RXSTATUS_ABORT_RECEIVED) && + info->loopmode_insert_requested && + usc_loopmode_active(info) ) + { + ++info->icount.rxabort; + info->loopmode_insert_requested = false; + + /* clear CMR:13 to start echoing RxD to TxD */ + info->cmr_value &= ~BIT13; + usc_OutReg(info, CMR, info->cmr_value); + + /* disable received abort irq (no longer required) */ + usc_OutReg(info, RICR, + (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED)); + } + + if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) { + if (status & RXSTATUS_EXITED_HUNT) + info->icount.exithunt++; + if (status & RXSTATUS_IDLE_RECEIVED) + info->icount.rxidle++; + wake_up_interruptible(&info->event_wait_q); + } + + if (status & RXSTATUS_OVERRUN){ + info->icount.rxover++; + usc_process_rxoverrun_sync( info ); + } + + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + usc_UnlatchRxstatusBits( info, status ); + +} /* end of mgsl_isr_receive_status() */ + +/* mgsl_isr_transmit_status() + * + * Service a transmit status interrupt + * HDLC mode :end of transmit frame + * Async mode:all data is sent + * transmit status is indicated by bits in the TCSR. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_status( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, TCSR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_status status=%04X\n", + __FILE__,__LINE__,status); + + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + usc_UnlatchTxstatusBits( info, status ); + + if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) ) + { + /* finished sending HDLC abort. This may leave */ + /* the TxFifo with data from the aborted frame */ + /* so purge the TxFifo. Also shutdown the DMA */ + /* channel in case there is data remaining in */ + /* the DMA buffer */ + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + } + + if ( status & TXSTATUS_EOF_SENT ) + info->icount.txok++; + else if ( status & TXSTATUS_UNDERRUN ) + info->icount.txunder++; + else if ( status & TXSTATUS_ABORT_SENT ) + info->icount.txabort++; + else + info->icount.txunder++; + + info->tx_active = false; + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + del_timer(&info->tx_timer); + + if ( info->drop_rts_on_tx_done ) { + usc_get_serial_signals( info ); + if ( info->serial_signals & SerialSignal_RTS ) { + info->serial_signals &= ~SerialSignal_RTS; + usc_set_serial_signals( info ); + } + info->drop_rts_on_tx_done = false; + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->port.tty->stopped || info->port.tty->hw_stopped) { + usc_stop_transmitter(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + +} /* end of mgsl_isr_transmit_status() */ + +/* mgsl_isr_io_pin() + * + * Service an Input/Output pin interrupt. The type of + * interrupt is indicated by bits in the MISR + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_io_pin( struct mgsl_struct *info ) +{ + struct mgsl_icount *icount; + u16 status = usc_InReg( info, MISR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_io_pin status=%04X\n", + __FILE__,__LINE__,status); + + usc_ClearIrqPendingBits( info, IO_PIN ); + usc_UnlatchIostatusBits( info, status ); + + if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | + MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { + icount = &info->icount; + /* update input line counters */ + if (status & MISCSTATUS_RI_LATCHED) { + if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_RI); + icount->rng++; + if ( status & MISCSTATUS_RI ) + info->input_signal_events.ri_up++; + else + info->input_signal_events.ri_down++; + } + if (status & MISCSTATUS_DSR_LATCHED) { + if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_DSR); + icount->dsr++; + if ( status & MISCSTATUS_DSR ) + info->input_signal_events.dsr_up++; + else + info->input_signal_events.dsr_down++; + } + if (status & MISCSTATUS_DCD_LATCHED) { + if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_DCD); + icount->dcd++; + if (status & MISCSTATUS_DCD) { + info->input_signal_events.dcd_up++; + } else + info->input_signal_events.dcd_down++; +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) { + if (status & MISCSTATUS_DCD) + netif_carrier_on(info->netdev); + else + netif_carrier_off(info->netdev); + } +#endif + } + if (status & MISCSTATUS_CTS_LATCHED) + { + if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_CTS); + icount->cts++; + if ( status & MISCSTATUS_CTS ) + info->input_signal_events.cts_up++; + else + info->input_signal_events.cts_down++; + } + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + if ( (info->port.flags & ASYNC_CHECK_CD) && + (status & MISCSTATUS_DCD_LATCHED) ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s CD now %s...", info->device_name, + (status & MISCSTATUS_DCD) ? "on" : "off"); + if (status & MISCSTATUS_DCD) + wake_up_interruptible(&info->port.open_wait); + else { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("doing serial hangup..."); + if (info->port.tty) + tty_hangup(info->port.tty); + } + } + + if ( (info->port.flags & ASYNC_CTS_FLOW) && + (status & MISCSTATUS_CTS_LATCHED) ) { + if (info->port.tty->hw_stopped) { + if (status & MISCSTATUS_CTS) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx start..."); + if (info->port.tty) + info->port.tty->hw_stopped = 0; + usc_start_transmitter(info); + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(status & MISCSTATUS_CTS)) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx stop..."); + if (info->port.tty) + info->port.tty->hw_stopped = 1; + usc_stop_transmitter(info); + } + } + } + } + + info->pending_bh |= BH_STATUS; + + /* for diagnostics set IRQ flag */ + if ( status & MISCSTATUS_TXC_LATCHED ){ + usc_OutReg( info, SICR, + (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) ); + usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED ); + info->irq_occurred = true; + } + +} /* end of mgsl_isr_io_pin() */ + +/* mgsl_isr_transmit_data() + * + * Service a transmit data interrupt (async mode only). + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_data( struct mgsl_struct *info ) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n", + __FILE__,__LINE__,info->xmit_cnt); + + usc_ClearIrqPendingBits( info, TRANSMIT_DATA ); + + if (info->port.tty->stopped || info->port.tty->hw_stopped) { + usc_stop_transmitter(info); + return; + } + + if ( info->xmit_cnt ) + usc_load_txfifo( info ); + else + info->tx_active = false; + + if (info->xmit_cnt < WAKEUP_CHARS) + info->pending_bh |= BH_TRANSMIT; + +} /* end of mgsl_isr_transmit_data() */ + +/* mgsl_isr_receive_data() + * + * Service a receive data interrupt. This occurs + * when operating in asynchronous interrupt transfer mode. + * The receive data FIFO is flushed to the receive data buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_data( struct mgsl_struct *info ) +{ + int Fifocount; + u16 status; + int work = 0; + unsigned char DataByte; + struct tty_struct *tty = info->port.tty; + struct mgsl_icount *icount = &info->icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_data\n", + __FILE__,__LINE__); + + usc_ClearIrqPendingBits( info, RECEIVE_DATA ); + + /* select FIFO status for RICR readback */ + usc_RCmd( info, RCmd_SelectRicrRxFifostatus ); + + /* clear the Wordstatus bit so that status readback */ + /* only reflects the status of this byte */ + usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 )); + + /* flush the receive FIFO */ + + while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) { + int flag; + + /* read one byte from RxFIFO */ + outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY), + info->io_base + CCAR ); + DataByte = inb( info->io_base + CCAR ); + + /* get the status of the received byte */ + status = usc_InReg(info, RCSR); + if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR + + RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) + usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); + + icount->rx++; + + flag = 0; + if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR + + RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) { + printk("rxerr=%04X\n",status); + /* update error statistics */ + if ( status & RXSTATUS_BREAK_RECEIVED ) { + status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR); + icount->brk++; + } else if (status & RXSTATUS_PARITY_ERROR) + icount->parity++; + else if (status & RXSTATUS_FRAMING_ERROR) + icount->frame++; + else if (status & RXSTATUS_OVERRUN) { + /* must issue purge fifo cmd before */ + /* 16C32 accepts more receive chars */ + usc_RTCmd(info,RTCmd_PurgeRxFifo); + icount->overrun++; + } + + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask) + continue; + + status &= info->read_status_mask; + + if (status & RXSTATUS_BREAK_RECEIVED) { + flag = TTY_BREAK; + if (info->port.flags & ASYNC_SAK) + do_SAK(tty); + } else if (status & RXSTATUS_PARITY_ERROR) + flag = TTY_PARITY; + else if (status & RXSTATUS_FRAMING_ERROR) + flag = TTY_FRAME; + } /* end of if (error) */ + tty_insert_flip_char(tty, DataByte, flag); + if (status & RXSTATUS_OVERRUN) { + /* Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + work += tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + } + + if ( debug_level >= DEBUG_LEVEL_ISR ) { + printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", + __FILE__,__LINE__,icount->rx,icount->brk, + icount->parity,icount->frame,icount->overrun); + } + + if(work) + tty_flip_buffer_push(tty); +} + +/* mgsl_isr_misc() + * + * Service a miscellaneous interrupt source. + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void mgsl_isr_misc( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, MISR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_misc status=%04X\n", + __FILE__,__LINE__,status); + + if ((status & MISCSTATUS_RCC_UNDERRUN) && + (info->params.mode == MGSL_MODE_HDLC)) { + + /* turn off receiver and rx DMA */ + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + usc_DmaCmd(info, DmaCmd_ResetRxChannel); + usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS); + usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS); + + /* schedule BH handler to restart receiver */ + info->pending_bh |= BH_RECEIVE; + info->rx_rcc_underrun = true; + } + + usc_ClearIrqPendingBits( info, MISC ); + usc_UnlatchMiscstatusBits( info, status ); + +} /* end of mgsl_isr_misc() */ + +/* mgsl_isr_null() + * + * Services undefined interrupt vectors from the + * USC. (hence this function SHOULD never be called) + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void mgsl_isr_null( struct mgsl_struct *info ) +{ + +} /* end of mgsl_isr_null() */ + +/* mgsl_isr_receive_dma() + * + * Service a receive DMA channel interrupt. + * For this driver there are two sources of receive DMA interrupts + * as identified in the Receive DMA mode Register (RDMR): + * + * BIT3 EOA/EOL End of List, all receive buffers in receive + * buffer list have been filled (no more free buffers + * available). The DMA controller has shut down. + * + * BIT2 EOB End of Buffer. This interrupt occurs when a receive + * DMA buffer is terminated in response to completion + * of a good frame or a frame with errors. The status + * of the frame is stored in the buffer entry in the + * list of receive buffer entries. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_dma( struct mgsl_struct *info ) +{ + u16 status; + + /* clear interrupt pending and IUS bit for Rx DMA IRQ */ + usc_OutDmaReg( info, CDIR, BIT9+BIT1 ); + + /* Read the receive DMA status to identify interrupt type. */ + /* This also clears the status bits. */ + status = usc_InDmaReg( info, RDMR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + info->pending_bh |= BH_RECEIVE; + + if ( status & BIT3 ) { + info->rx_overflow = true; + info->icount.buf_overrun++; + } + +} /* end of mgsl_isr_receive_dma() */ + +/* mgsl_isr_transmit_dma() + * + * This function services a transmit DMA channel interrupt. + * + * For this driver there is one source of transmit DMA interrupts + * as identified in the Transmit DMA Mode Register (TDMR): + * + * BIT2 EOB End of Buffer. This interrupt occurs when a + * transmit DMA buffer has been emptied. + * + * The driver maintains enough transmit DMA buffers to hold at least + * one max frame size transmit frame. When operating in a buffered + * transmit mode, there may be enough transmit DMA buffers to hold at + * least two or more max frame size frames. On an EOB condition, + * determine if there are any queued transmit buffers and copy into + * transmit DMA buffers if we have room. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_dma( struct mgsl_struct *info ) +{ + u16 status; + + /* clear interrupt pending and IUS bit for Tx DMA IRQ */ + usc_OutDmaReg(info, CDIR, BIT8+BIT0 ); + + /* Read the transmit DMA status to identify interrupt type. */ + /* This also clears the status bits. */ + + status = usc_InDmaReg( info, TDMR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + if ( status & BIT2 ) { + --info->tx_dma_buffers_used; + + /* if there are transmit frames queued, + * try to load the next one + */ + if ( load_next_tx_holding_buffer(info) ) { + /* if call returns non-zero value, we have + * at least one free tx holding buffer + */ + info->pending_bh |= BH_TRANSMIT; + } + } + +} /* end of mgsl_isr_transmit_dma() */ + +/* mgsl_interrupt() + * + * Interrupt service routine entry point. + * + * Arguments: + * + * irq interrupt number that caused interrupt + * dev_id device ID supplied during interrupt registration + * + * Return Value: None + */ +static irqreturn_t mgsl_interrupt(int dummy, void *dev_id) +{ + struct mgsl_struct *info = dev_id; + u16 UscVector; + u16 DmaVector; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n", + __FILE__, __LINE__, info->irq_level); + + spin_lock(&info->irq_spinlock); + + for(;;) { + /* Read the interrupt vectors from hardware. */ + UscVector = usc_InReg(info, IVR) >> 9; + DmaVector = usc_InDmaReg(info, DIVR); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n", + __FILE__,__LINE__,info->device_name,UscVector,DmaVector); + + if ( !UscVector && !DmaVector ) + break; + + /* Dispatch interrupt vector */ + if ( UscVector ) + (*UscIsrTable[UscVector])(info); + else if ( (DmaVector&(BIT10|BIT9)) == BIT10) + mgsl_isr_transmit_dma(info); + else + mgsl_isr_receive_dma(info); + + if ( info->isr_overflow ) { + printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n", + __FILE__, __LINE__, info->device_name, info->irq_level); + usc_DisableMasterIrqBit(info); + usc_DisableDmaInterrupts(info,DICR_MASTER); + break; + } + } + + /* Request bottom half processing if there's something + * for it to do and the bh is not already running + */ + + if ( info->pending_bh && !info->bh_running && !info->bh_requested ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s queueing bh task.\n", + __FILE__,__LINE__,info->device_name); + schedule_work(&info->task); + info->bh_requested = true; + } + + spin_unlock(&info->irq_spinlock); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n", + __FILE__, __LINE__, info->irq_level); + + return IRQ_HANDLED; +} /* end of mgsl_interrupt() */ + +/* startup() + * + * Initialize and start device. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error code + */ +static int startup(struct mgsl_struct * info) +{ + int retval = 0; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name); + + if (info->port.flags & ASYNC_INITIALIZED) + return 0; + + if (!info->xmit_buf) { + /* allocate a page of memory for a transmit buffer */ + info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); + if (!info->xmit_buf) { + printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", + __FILE__,__LINE__,info->device_name); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + memset(&info->icount, 0, sizeof(info->icount)); + + setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info); + + /* Allocate and claim adapter resources */ + retval = mgsl_claim_resources(info); + + /* perform existence check and diagnostics */ + if ( !retval ) + retval = mgsl_adapter_test(info); + + if ( retval ) { + if (capable(CAP_SYS_ADMIN) && info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + mgsl_release_resources(info); + return retval; + } + + /* program hardware for current parameters */ + mgsl_change_params(info); + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->port.flags |= ASYNC_INITIALIZED; + + return 0; + +} /* end of startup() */ + +/* shutdown() + * + * Called by mgsl_close() and mgsl_hangup() to shutdown hardware + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void shutdown(struct mgsl_struct * info) +{ + unsigned long flags; + + if (!(info->port.flags & ASYNC_INITIALIZED)) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_shutdown(%s)\n", + __FILE__,__LINE__, info->device_name ); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer_sync(&info->tx_timer); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = NULL; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_DisableMasterIrqBit(info); + usc_stop_receiver(info); + usc_stop_transmitter(info); + usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS + + TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC ); + usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE); + + /* Disable DMAEN (Port 7, Bit 14) */ + /* This disconnects the DMA request signal from the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14)); + + /* Disable INTEN (Port 6, Bit12) */ + /* This disconnects the IRQ request signal to the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12)); + + if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { + info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + usc_set_serial_signals(info); + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + mgsl_release_resources(info); + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->port.flags &= ~ASYNC_INITIALIZED; + +} /* end of shutdown() */ + +static void mgsl_program_hw(struct mgsl_struct *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + + usc_stop_receiver(info); + usc_stop_transmitter(info); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + if (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW || + info->netcount) + usc_set_sync_mode(info); + else + usc_set_async_mode(info); + + usc_set_serial_signals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI); + usc_EnableInterrupts(info, IO_PIN); + usc_get_serial_signals(info); + + if (info->netcount || info->port.tty->termios->c_cflag & CREAD) + usc_start_receiver(info); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + +/* Reconfigure adapter based on new parameters + */ +static void mgsl_change_params(struct mgsl_struct *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->port.tty || !info->port.tty->termios) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_change_params(%s)\n", + __FILE__,__LINE__, info->device_name ); + + cflag = info->port.tty->termios->c_cflag; + + /* if B0 rate (hangup) specified then negate DTR and RTS */ + /* otherwise assert DTR and RTS */ + if (cflag & CBAUD) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: info->params.data_bits = 7; break; + } + + if (cflag & CSTOPB) + info->params.stop_bits = 2; + else + info->params.stop_bits = 1; + + info->params.parity = ASYNC_PARITY_NONE; + if (cflag & PARENB) { + if (cflag & PARODD) + info->params.parity = ASYNC_PARITY_ODD; + else + info->params.parity = ASYNC_PARITY_EVEN; +#ifdef CMSPAR + if (cflag & CMSPAR) + info->params.parity = ASYNC_PARITY_SPACE; +#endif + } + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + /* if port data rate is set to 460800 or less then + * allow tty settings to override, otherwise keep the + * current data rate. + */ + if (info->params.data_rate <= 460800) + info->params.data_rate = tty_get_baud_rate(info->port.tty); + + if ( info->params.data_rate ) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + if (cflag & CRTSCTS) + info->port.flags |= ASYNC_CTS_FLOW; + else + info->port.flags &= ~ASYNC_CTS_FLOW; + + if (cflag & CLOCAL) + info->port.flags &= ~ASYNC_CHECK_CD; + else + info->port.flags |= ASYNC_CHECK_CD; + + /* process tty input control flags */ + + info->read_status_mask = RXSTATUS_OVERRUN; + if (I_INPCK(info->port.tty)) + info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= RXSTATUS_BREAK_RECEIVED; + + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; + if (I_IGNBRK(info->port.tty)) { + info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= RXSTATUS_OVERRUN; + } + + mgsl_program_hw(info); + +} /* end of mgsl_change_params() */ + +/* mgsl_put_char() + * + * Add a character to the transmit buffer. + * + * Arguments: tty pointer to tty information structure + * ch character to add to transmit buffer + * + * Return Value: None + */ +static int mgsl_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + int ret = 0; + + if (debug_level >= DEBUG_LEVEL_INFO) { + printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n", + __FILE__, __LINE__, ch, info->device_name); + } + + if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char")) + return 0; + + if (!info->xmit_buf) + return 0; + + spin_lock_irqsave(&info->irq_spinlock, flags); + + if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) { + if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) { + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE-1; + info->xmit_cnt++; + ret = 1; + } + } + spin_unlock_irqrestore(&info->irq_spinlock, flags); + return ret; + +} /* end of mgsl_put_char() */ + +/* mgsl_flush_chars() + * + * Enable transmitter so remaining characters in the + * transmit buffer are sent. + * + * Arguments: tty pointer to tty information structure + * Return Value: None + */ +static void mgsl_flush_chars(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n", + __FILE__,__LINE__,info->device_name,info->xmit_cnt); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars")) + return; + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->irq_spinlock,flags); + + if (!info->tx_active) { + if ( (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) { + /* operating in synchronous (frame oriented) mode */ + /* copy data from circular xmit_buf to */ + /* transmit DMA buffer. */ + mgsl_load_tx_dma_buffer(info, + info->xmit_buf,info->xmit_cnt); + } + usc_start_transmitter(info); + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_flush_chars() */ + +/* mgsl_write() + * + * Send a block of data + * + * Arguments: + * + * tty pointer to tty information structure + * buf pointer to buffer containing send data + * count size of send data in bytes + * + * Return Value: number of characters written + */ +static int mgsl_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) count=%d\n", + __FILE__,__LINE__,info->device_name,count); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_write")) + goto cleanup; + + if (!info->xmit_buf) + goto cleanup; + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + /* operating in synchronous (frame oriented) mode */ + if (info->tx_active) { + + if ( info->params.mode == MGSL_MODE_HDLC ) { + ret = 0; + goto cleanup; + } + /* transmitter is actively sending data - + * if we have multiple transmit dma and + * holding buffers, attempt to queue this + * frame for transmission at a later time. + */ + if (info->tx_holding_count >= info->num_tx_holding_buffers ) { + /* no tx holding buffers available */ + ret = 0; + goto cleanup; + } + + /* queue transmit frame request */ + ret = count; + save_tx_buffer_request(info,buf,count); + + /* if we have sufficient tx dma buffers, + * load the next buffered tx request + */ + spin_lock_irqsave(&info->irq_spinlock,flags); + load_next_tx_holding_buffer(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + goto cleanup; + } + + /* if operating in HDLC LoopMode and the adapter */ + /* has yet to be inserted into the loop, we can't */ + /* transmit */ + + if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) && + !usc_loopmode_active(info) ) + { + ret = 0; + goto cleanup; + } + + if ( info->xmit_cnt ) { + /* Send accumulated from send_char() calls */ + /* as frame and wait before accepting more data. */ + ret = 0; + + /* copy data from circular xmit_buf to */ + /* transmit DMA buffer. */ + mgsl_load_tx_dma_buffer(info, + info->xmit_buf,info->xmit_cnt); + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n", + __FILE__,__LINE__,info->device_name); + } else { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n", + __FILE__,__LINE__,info->device_name); + ret = count; + info->xmit_cnt = count; + mgsl_load_tx_dma_buffer(info,buf,count); + } + } else { + while (1) { + spin_lock_irqsave(&info->irq_spinlock,flags); + c = min_t(int, count, + min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) { + spin_unlock_irqrestore(&info->irq_spinlock,flags); + break; + } + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = ((info->xmit_head + c) & + (SERIAL_XMIT_SIZE-1)); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + buf += c; + count -= c; + ret += c; + } + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_active) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +cleanup: + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) returning=%d\n", + __FILE__,__LINE__,info->device_name,ret); + + return ret; + +} /* end of mgsl_write() */ + +/* mgsl_write_room() + * + * Return the count of free bytes in transmit buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static int mgsl_write_room(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + int ret; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_write_room(%s)=%d\n", + __FILE__,__LINE__, info->device_name,ret ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + if ( info->tx_active ) + return 0; + else + return HDLC_MAX_FRAME_SIZE; + } + + return ret; + +} /* end of mgsl_write_room() */ + +/* mgsl_chars_in_buffer() + * + * Return the count of bytes in transmit buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static int mgsl_chars_in_buffer(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_chars_in_buffer(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer")) + return 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n", + __FILE__,__LINE__, info->device_name,info->xmit_cnt ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + if ( info->tx_active ) + return info->max_frame_size; + else + return 0; + } + + return info->xmit_cnt; +} /* end of mgsl_chars_in_buffer() */ + +/* mgsl_flush_buffer() + * + * Discard all data in the send buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_flush_buffer(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_flush_buffer(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer")) + return; + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + del_timer(&info->tx_timer); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + tty_wakeup(tty); +} + +/* mgsl_send_xchar() + * + * Send a high-priority XON/XOFF character + * + * Arguments: tty pointer to tty info structure + * ch character to send + * Return Value: None + */ +static void mgsl_send_xchar(struct tty_struct *tty, char ch) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_send_xchar(%s,%d)\n", + __FILE__,__LINE__, info->device_name, ch ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar")) + return; + + info->x_char = ch; + if (ch) { + /* Make sure transmit interrupts are on */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_enabled) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +} /* end of mgsl_send_xchar() */ + +/* mgsl_throttle() + * + * Signal remote device to throttle send data (our receive data) + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_throttle(struct tty_struct * tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_throttle(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle")) + return; + + if (I_IXOFF(tty)) + mgsl_send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals &= ~SerialSignal_RTS; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +} /* end of mgsl_throttle() */ + +/* mgsl_unthrottle() + * + * Signal remote device to stop throttling send data (our receive data) + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_unthrottle(struct tty_struct * tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_unthrottle(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + mgsl_send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals |= SerialSignal_RTS; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + +} /* end of mgsl_unthrottle() */ + +/* mgsl_get_stats() + * + * get the current serial parameters information + * + * Arguments: info pointer to device instance data + * user_icount pointer to buffer to hold returned stats + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_params(%s)\n", + __FILE__,__LINE__, info->device_name); + + if (!user_icount) { + memset(&info->icount, 0, sizeof(info->icount)); + } else { + mutex_lock(&info->port.mutex); + COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); + mutex_unlock(&info->port.mutex); + if (err) + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_stats() */ + +/* mgsl_get_params() + * + * get the current serial parameters information + * + * Arguments: info pointer to device instance data + * user_params pointer to buffer to hold returned params + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params) +{ + int err; + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_params(%s)\n", + __FILE__,__LINE__, info->device_name); + + mutex_lock(&info->port.mutex); + COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + mutex_unlock(&info->port.mutex); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_params() */ + +/* mgsl_set_params() + * + * set the serial parameters + * + * Arguments: + * + * info pointer to device instance data + * new_params user buffer containing new serial params + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__, + info->device_name ); + COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + mutex_lock(&info->port.mutex); + spin_lock_irqsave(&info->irq_spinlock,flags); + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + mgsl_change_params(info); + mutex_unlock(&info->port.mutex); + + return 0; + +} /* end of mgsl_set_params() */ + +/* mgsl_get_txidle() + * + * get the current transmit idle mode + * + * Arguments: info pointer to device instance data + * idle_mode pointer to buffer to hold returned idle mode + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_txidle(%s)=%d\n", + __FILE__,__LINE__, info->device_name, info->idle_mode); + + COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_txidle() */ + +/* mgsl_set_txidle() service ioctl to set transmit idle mode + * + * Arguments: info pointer to device instance data + * idle_mode new idle mode + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__, + info->device_name, idle_mode ); + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->idle_mode = idle_mode; + usc_set_txidle( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_set_txidle() */ + +/* mgsl_txenable() + * + * enable or disable the transmitter + * + * Arguments: + * + * info pointer to device instance data + * enable 1 = enable, 0 = disable + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_txenable(struct mgsl_struct * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__, + info->device_name, enable); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( enable ) { + if ( !info->tx_enabled ) { + + usc_start_transmitter(info); + /*-------------------------------------------------- + * if HDLC/SDLC Loop mode, attempt to insert the + * station in the 'loop' by setting CMR:13. Upon + * receipt of the next GoAhead (RxAbort) sequence, + * the OnLoop indicator (CCSR:7) should go active + * to indicate that we are on the loop + *--------------------------------------------------*/ + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_insert_request( info ); + } + } else { + if ( info->tx_enabled ) + usc_stop_transmitter(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_txenable() */ + +/* mgsl_txabort() abort send HDLC frame + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_txabort(struct mgsl_struct * info) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__, + info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) + { + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_cancel_transmit( info ); + else + usc_TCmd(info,TCmd_SendAbort); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_txabort() */ + +/* mgsl_rxenable() enable or disable the receiver + * + * Arguments: info pointer to device instance data + * enable 1 = enable, 0 = disable + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_rxenable(struct mgsl_struct * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__, + info->device_name, enable); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( enable ) { + if ( !info->rx_enabled ) + usc_start_receiver(info); + } else { + if ( info->rx_enabled ) + usc_stop_receiver(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_rxenable() */ + +/* mgsl_wait_event() wait for specified event to occur + * + * Arguments: info pointer to device instance data + * mask pointer to bitmask of events to wait for + * Return Value: 0 if successful and bit mask updated with + * of events triggerred, + * otherwise error code + */ +static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); + if (rc) { + return -EFAULT; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__, + info->device_name, mask); + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* return immediately if state matches requested events */ + usc_get_serial_signals(info); + s = info->serial_signals; + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->irq_spinlock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + u16 oldreg = usc_InReg(info,RICR); + u16 newreg = oldreg + + (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) + + (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0); + if (oldreg != newreg) + usc_OutReg(info, RICR, newreg); + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + usc_OutReg(info, RICR, usc_InReg(info,RICR) & + ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +exit: + if ( rc == 0 ) + PUT_USER(rc, events, mask_ptr); + + return rc; + +} /* end of mgsl_wait_event() */ + +static int modem_input_wait(struct mgsl_struct *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* return the state of the serial control and status signals + */ +static int tiocmget(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + + ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + + ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + + ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + + ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + + ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmget() value=%08X\n", + __FILE__,__LINE__, info->device_name, result ); + return result; +} + +/* set modem control signals (DTR/RTS) + */ +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmset(%x,%x)\n", + __FILE__,__LINE__,info->device_name, set, clear); + + if (set & TIOCM_RTS) + info->serial_signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->serial_signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->serial_signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->serial_signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return 0; +} + +/* mgsl_break() Set or clear transmit break condition + * + * Arguments: tty pointer to tty instance data + * break_state -1=set break condition, 0=clear + * Return Value: error code + */ +static int mgsl_break(struct tty_struct *tty, int break_state) +{ + struct mgsl_struct * info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_break(%s,%d)\n", + __FILE__,__LINE__, info->device_name, break_state); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_break")) + return -EINVAL; + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (break_state == -1) + usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7)); + else + usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7)); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_break() */ + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int msgl_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct mgsl_struct * info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + return 0; +} + +/* mgsl_ioctl() Service an IOCTL request + * + * Arguments: + * + * tty pointer to tty instance data + * cmd IOCTL command code + * arg command argument/context + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct mgsl_struct * info = tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__, + info->device_name, cmd ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCMIWAIT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + return mgsl_ioctl_common(info, cmd, arg); +} + +static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + + switch (cmd) { + case MGSL_IOCGPARAMS: + return mgsl_get_params(info, argp); + case MGSL_IOCSPARAMS: + return mgsl_set_params(info, argp); + case MGSL_IOCGTXIDLE: + return mgsl_get_txidle(info, argp); + case MGSL_IOCSTXIDLE: + return mgsl_set_txidle(info,(int)arg); + case MGSL_IOCTXENABLE: + return mgsl_txenable(info,(int)arg); + case MGSL_IOCRXENABLE: + return mgsl_rxenable(info,(int)arg); + case MGSL_IOCTXABORT: + return mgsl_txabort(info); + case MGSL_IOCGSTATS: + return mgsl_get_stats(info, argp); + case MGSL_IOCWAITEVENT: + return mgsl_wait_event(info, argp); + case MGSL_IOCLOOPTXDONE: + return mgsl_loopmode_send_done(info); + /* Wait for modem input (DCD,RI,DSR,CTS) change + * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) + */ + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* mgsl_set_termios() + * + * Set new termios settings + * + * Arguments: + * + * tty pointer to tty structure + * termios pointer to buffer to hold returned old termios + * + * Return Value: None + */ +static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__, + tty->driver->name ); + + mgsl_change_params(info); + + /* Handle transition to B0 status */ + if (old_termios->c_cflag & CBAUD && + !(tty->termios->c_cflag & CBAUD)) { + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + tty->termios->c_cflag & CBAUD) { + info->serial_signals |= SerialSignal_DTR; + if (!(tty->termios->c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { + info->serial_signals |= SerialSignal_RTS; + } + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + + /* Handle turning off CRTSCTS */ + if (old_termios->c_cflag & CRTSCTS && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + mgsl_start(tty); + } + +} /* end of mgsl_set_termios() */ + +/* mgsl_close() + * + * Called when port is closed. Wait for remaining data to be + * sent. Disable port and free resources. + * + * Arguments: + * + * tty pointer to open tty structure + * filp pointer to open file object + * + * Return Value: None + */ +static void mgsl_close(struct tty_struct *tty, struct file * filp) +{ + struct mgsl_struct * info = tty->driver_data; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_close")) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_close(%s) entry, count=%d\n", + __FILE__,__LINE__, info->device_name, info->port.count); + + if (tty_port_close_start(&info->port, tty, filp) == 0) + goto cleanup; + + mutex_lock(&info->port.mutex); + if (info->port.flags & ASYNC_INITIALIZED) + mgsl_wait_until_sent(tty, info->timeout); + mgsl_flush_buffer(tty); + tty_ldisc_flush(tty); + shutdown(info); + mutex_unlock(&info->port.mutex); + + tty_port_close_end(&info->port, tty); + info->port.tty = NULL; +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, + tty->driver->name, info->port.count); + +} /* end of mgsl_close() */ + +/* mgsl_wait_until_sent() + * + * Wait until the transmitter is empty. + * + * Arguments: + * + * tty pointer to tty info structure + * timeout time to wait for send completion + * + * Return Value: None + */ +static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct mgsl_struct * info = tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_until_sent(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent")) + return; + + if (!(info->port.flags & ASYNC_INITIALIZED)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if ( info->params.data_rate ) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } else { + while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) && + info->tx_enabled) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } + +exit: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_until_sent(%s) exit\n", + __FILE__,__LINE__, info->device_name ); + +} /* end of mgsl_wait_until_sent() */ + +/* mgsl_hangup() + * + * Called by tty_hangup() when a hangup is signaled. + * This is the same as to closing all open files for the port. + * + * Arguments: tty pointer to associated tty object + * Return Value: None + */ +static void mgsl_hangup(struct tty_struct *tty) +{ + struct mgsl_struct * info = tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_hangup(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup")) + return; + + mgsl_flush_buffer(tty); + shutdown(info); + + info->port.count = 0; + info->port.flags &= ~ASYNC_NORMAL_ACTIVE; + info->port.tty = NULL; + + wake_up_interruptible(&info->port.open_wait); + +} /* end of mgsl_hangup() */ + +/* + * carrier_raised() + * + * Return true if carrier is raised + */ + +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + + spin_lock_irqsave(&info->irq_spinlock, flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock, flags); + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void dtr_rts(struct tty_port *port, int on) +{ + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (on) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + + +/* block_til_ready() + * + * Block the current process until the specified port + * is ready to be opened. + * + * Arguments: + * + * tty pointer to tty info structure + * filp pointer to open file object + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise error code + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct mgsl_struct *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + bool do_clocal = false; + bool extra_count = false; + unsigned long flags; + int dcd; + struct tty_port *port = &info->port; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready on %s\n", + __FILE__,__LINE__, tty->driver->name ); + + if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ + /* nonblock mode is set or port is not enabled */ + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = true; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * mgsl_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready before block on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + spin_lock_irqsave(&info->irq_spinlock, flags); + if (!tty_hung_up_p(filp)) { + extra_count = true; + port->count--; + } + spin_unlock_irqrestore(&info->irq_spinlock, flags); + port->blocked_open++; + + while (1) { + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + dcd = tty_port_carrier_raised(&info->port); + + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd)) + break; + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready blocking on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + tty_unlock(); + schedule(); + tty_lock(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + /* FIXME: Racy on hangup during close wait */ + if (extra_count) + port->count++; + port->blocked_open--; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready after blocking on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + if (!retval) + port->flags |= ASYNC_NORMAL_ACTIVE; + + return retval; + +} /* end of block_til_ready() */ + +/* mgsl_open() + * + * Called when a port is opened. Init and enable port. + * Perform serial-specific initialization for the tty structure. + * + * Arguments: tty pointer to tty info structure + * filp associated file pointer + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_open(struct tty_struct *tty, struct file * filp) +{ + struct mgsl_struct *info; + int retval, line; + unsigned long flags; + + /* verify range of specified line number */ + line = tty->index; + if ((line < 0) || (line >= mgsl_device_count)) { + printk("%s(%d):mgsl_open with invalid line #%d.\n", + __FILE__,__LINE__,line); + return -ENODEV; + } + + /* find the info structure for the specified line */ + info = mgsl_device_list; + while(info && info->line != line) + info = info->next_device; + if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) + return -ENODEV; + + tty->driver_data = info; + info->port.tty = tty; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_open(%s), old ref count = %d\n", + __FILE__,__LINE__,tty->driver->name, info->port.count); + + /* If port is closing, signal caller to try again */ + if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){ + if (info->port.flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->port.close_wait); + retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); + goto cleanup; + } + + info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + goto cleanup; + } + info->port.count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->port.count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) + goto cleanup; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready(%s) returned %d\n", + __FILE__,__LINE__, info->device_name, retval); + goto cleanup; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_open(%s) success\n", + __FILE__,__LINE__, info->device_name); + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->port.tty = NULL; /* tty layer will release tty struct */ + if(info->port.count) + info->port.count--; + } + + return retval; + +} /* end of mgsl_open() */ + +/* + * /proc fs routines.... + */ + +static inline void line_info(struct seq_file *m, struct mgsl_struct *info) +{ + char stat_buf[30]; + unsigned long flags; + + if (info->bus_type == MGSL_BUS_TYPE_PCI) { + seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X", + info->device_name, info->io_base, info->irq_level, + info->phys_memory_base, info->phys_lcr_base); + } else { + seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d", + info->device_name, info->io_base, + info->irq_level, info->dma_level); + } + + /* output current serial signal states */ + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->serial_signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->serial_signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->serial_signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->serial_signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->serial_signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->serial_signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + seq_printf(m, " HDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + seq_printf(m, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + seq_printf(m, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + seq_printf(m, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + seq_printf(m, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + seq_printf(m, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + seq_printf(m, " rxcrc:%d", info->icount.rxcrc); + } else { + seq_printf(m, " ASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + seq_printf(m, " fe:%d", info->icount.frame); + if (info->icount.parity) + seq_printf(m, " pe:%d", info->icount.parity); + if (info->icount.brk) + seq_printf(m, " brk:%d", info->icount.brk); + if (info->icount.overrun) + seq_printf(m, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + seq_printf(m, " %s\n", stat_buf+1); + + seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); + + spin_lock_irqsave(&info->irq_spinlock,flags); + { + u16 Tcsr = usc_InReg( info, TCSR ); + u16 Tdmr = usc_InDmaReg( info, TDMR ); + u16 Ticr = usc_InReg( info, TICR ); + u16 Rscr = usc_InReg( info, RCSR ); + u16 Rdmr = usc_InDmaReg( info, RDMR ); + u16 Ricr = usc_InReg( info, RICR ); + u16 Icr = usc_InReg( info, ICR ); + u16 Dccr = usc_InReg( info, DCCR ); + u16 Tmr = usc_InReg( info, TMR ); + u16 Tccr = usc_InReg( info, TCCR ); + u16 Ccar = inw( info->io_base + CCAR ); + seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n" + "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n", + Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar ); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + +/* Called to print information about devices */ +static int mgsl_proc_show(struct seq_file *m, void *v) +{ + struct mgsl_struct *info; + + seq_printf(m, "synclink driver:%s\n", driver_version); + + info = mgsl_device_list; + while( info ) { + line_info(m, info); + info = info->next_device; + } + return 0; +} + +static int mgsl_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mgsl_proc_show, NULL); +} + +static const struct file_operations mgsl_proc_fops = { + .owner = THIS_MODULE, + .open = mgsl_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* mgsl_allocate_dma_buffers() + * + * Allocate and format DMA buffers (ISA adapter) + * or format shared memory buffers (PCI adapter). + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error + */ +static int mgsl_allocate_dma_buffers(struct mgsl_struct *info) +{ + unsigned short BuffersPerFrame; + + info->last_mem_alloc = 0; + + /* Calculate the number of DMA buffers necessary to hold the */ + /* largest allowable frame size. Note: If the max frame size is */ + /* not an even multiple of the DMA buffer size then we need to */ + /* round the buffer count per frame up one. */ + + BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE); + if ( info->max_frame_size % DMABUFFERSIZE ) + BuffersPerFrame++; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* + * The PCI adapter has 256KBytes of shared memory to use. + * This is 64 PAGE_SIZE buffers. + * + * The first page is used for padding at this time so the + * buffer list does not begin at offset 0 of the PCI + * adapter's shared memory. + * + * The 2nd page is used for the buffer list. A 4K buffer + * list can hold 128 DMA_BUFFER structures at 32 bytes + * each. + * + * This leaves 62 4K pages. + * + * The next N pages are used for transmit frame(s). We + * reserve enough 4K page blocks to hold the required + * number of transmit dma buffers (num_tx_dma_buffers), + * each of MaxFrameSize size. + * + * Of the remaining pages (62-N), determine how many can + * be used to receive full MaxFrameSize inbound frames + */ + info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame; + info->rx_buffer_count = 62 - info->tx_buffer_count; + } else { + /* Calculate the number of PAGE_SIZE buffers needed for */ + /* receive and transmit DMA buffers. */ + + + /* Calculate the number of DMA buffers necessary to */ + /* hold 7 max size receive frames and one max size transmit frame. */ + /* The receive buffer count is bumped by one so we avoid an */ + /* End of List condition if all receive buffers are used when */ + /* using linked list DMA buffers. */ + + info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame; + info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6; + + /* + * limit total TxBuffers & RxBuffers to 62 4K total + * (ala PCI Allocation) + */ + + if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 ) + info->rx_buffer_count = 62 - info->tx_buffer_count; + + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n", + __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count); + + if ( mgsl_alloc_buffer_list_memory( info ) < 0 || + mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 || + mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 || + mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 || + mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) { + printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__); + return -ENOMEM; + } + + mgsl_reset_rx_dma_buffers( info ); + mgsl_reset_tx_dma_buffers( info ); + + return 0; + +} /* end of mgsl_allocate_dma_buffers() */ + +/* + * mgsl_alloc_buffer_list_memory() + * + * Allocate a common DMA buffer for use as the + * receive and transmit buffer lists. + * + * A buffer list is a set of buffer entries where each entry contains + * a pointer to an actual buffer and a pointer to the next buffer entry + * (plus some other info about the buffer). + * + * The buffer entries for a list are built to form a circular list so + * that when the entire list has been traversed you start back at the + * beginning. + * + * This function allocates memory for just the buffer entries. + * The links (pointer to next entry) are filled in with the physical + * address of the next entry so the adapter can navigate the list + * using bus master DMA. The pointers to the actual buffers are filled + * out later when the actual buffers are allocated. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error + */ +static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info ) +{ + unsigned int i; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* PCI adapter uses shared memory. */ + info->buffer_list = info->memory_base + info->last_mem_alloc; + info->buffer_list_phys = info->last_mem_alloc; + info->last_mem_alloc += BUFFERLISTSIZE; + } else { + /* ISA adapter uses system memory. */ + /* The buffer lists are allocated as a common buffer that both */ + /* the processor and adapter can access. This allows the driver to */ + /* inspect portions of the buffer while other portions are being */ + /* updated by the adapter using Bus Master DMA. */ + + info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL); + if (info->buffer_list == NULL) + return -ENOMEM; + info->buffer_list_phys = (u32)(info->buffer_list_dma_addr); + } + + /* We got the memory for the buffer entry lists. */ + /* Initialize the memory block to all zeros. */ + memset( info->buffer_list, 0, BUFFERLISTSIZE ); + + /* Save virtual address pointers to the receive and */ + /* transmit buffer lists. (Receive 1st). These pointers will */ + /* be used by the processor to access the lists. */ + info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; + info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; + info->tx_buffer_list += info->rx_buffer_count; + + /* + * Build the links for the buffer entry lists such that + * two circular lists are built. (Transmit and Receive). + * + * Note: the links are physical addresses + * which are read by the adapter to determine the next + * buffer entry to use. + */ + + for ( i = 0; i < info->rx_buffer_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->rx_buffer_list[i].phys_entry = + info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->rx_buffer_list[i].link = info->buffer_list_phys; + + if ( i < info->rx_buffer_count - 1 ) + info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); + } + + for ( i = 0; i < info->tx_buffer_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->tx_buffer_list[i].phys_entry = info->buffer_list_phys + + ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->tx_buffer_list[i].link = info->buffer_list_phys + + info->rx_buffer_count * sizeof(DMABUFFERENTRY); + + if ( i < info->tx_buffer_count - 1 ) + info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); + } + + return 0; + +} /* end of mgsl_alloc_buffer_list_memory() */ + +/* Free DMA buffers allocated for use as the + * receive and transmit buffer lists. + * Warning: + * + * The data transfer buffers associated with the buffer list + * MUST be freed before freeing the buffer list itself because + * the buffer list contains the information necessary to free + * the individual buffers! + */ +static void mgsl_free_buffer_list_memory( struct mgsl_struct *info ) +{ + if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI) + dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr); + + info->buffer_list = NULL; + info->rx_buffer_list = NULL; + info->tx_buffer_list = NULL; + +} /* end of mgsl_free_buffer_list_memory() */ + +/* + * mgsl_alloc_frame_memory() + * + * Allocate the frame DMA buffers used by the specified buffer list. + * Each DMA buffer will be one memory page in size. This is necessary + * because memory can fragment enough that it may be impossible + * contiguous pages. + * + * Arguments: + * + * info pointer to device instance data + * BufferList pointer to list of buffer entries + * Buffercount count of buffer entries in buffer list + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount) +{ + int i; + u32 phys_addr; + + /* Allocate page sized buffers for the receive buffer list */ + + for ( i = 0; i < Buffercount; i++ ) { + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* PCI adapter uses shared memory buffers. */ + BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc; + phys_addr = info->last_mem_alloc; + info->last_mem_alloc += DMABUFFERSIZE; + } else { + /* ISA adapter uses system memory. */ + BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL); + if (BufferList[i].virt_addr == NULL) + return -ENOMEM; + phys_addr = (u32)(BufferList[i].dma_addr); + } + BufferList[i].phys_addr = phys_addr; + } + + return 0; + +} /* end of mgsl_alloc_frame_memory() */ + +/* + * mgsl_free_frame_memory() + * + * Free the buffers associated with + * each buffer entry of a buffer list. + * + * Arguments: + * + * info pointer to device instance data + * BufferList pointer to list of buffer entries + * Buffercount count of buffer entries in buffer list + * + * Return Value: None + */ +static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount) +{ + int i; + + if ( BufferList ) { + for ( i = 0 ; i < Buffercount ; i++ ) { + if ( BufferList[i].virt_addr ) { + if ( info->bus_type != MGSL_BUS_TYPE_PCI ) + dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr); + BufferList[i].virt_addr = NULL; + } + } + } + +} /* end of mgsl_free_frame_memory() */ + +/* mgsl_free_dma_buffers() + * + * Free DMA buffers + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_free_dma_buffers( struct mgsl_struct *info ) +{ + mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count ); + mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count ); + mgsl_free_buffer_list_memory( info ); + +} /* end of mgsl_free_dma_buffers() */ + + +/* + * mgsl_alloc_intermediate_rxbuffer_memory() + * + * Allocate a buffer large enough to hold max_frame_size. This buffer + * is used to pass an assembled frame to the line discipline. + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info) +{ + info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA); + if ( info->intermediate_rxbuffer == NULL ) + return -ENOMEM; + + return 0; + +} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */ + +/* + * mgsl_free_intermediate_rxbuffer_memory() + * + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: None + */ +static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info) +{ + kfree(info->intermediate_rxbuffer); + info->intermediate_rxbuffer = NULL; + +} /* end of mgsl_free_intermediate_rxbuffer_memory() */ + +/* + * mgsl_alloc_intermediate_txbuffer_memory() + * + * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size. + * This buffer is used to load transmit frames into the adapter's dma transfer + * buffers when there is sufficient space. + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info) +{ + int i; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s %s(%d) allocating %d tx holding buffers\n", + info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers); + + memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers)); + + for ( i=0; inum_tx_holding_buffers; ++i) { + info->tx_holding_buffers[i].buffer = + kmalloc(info->max_frame_size, GFP_KERNEL); + if (info->tx_holding_buffers[i].buffer == NULL) { + for (--i; i >= 0; i--) { + kfree(info->tx_holding_buffers[i].buffer); + info->tx_holding_buffers[i].buffer = NULL; + } + return -ENOMEM; + } + } + + return 0; + +} /* end of mgsl_alloc_intermediate_txbuffer_memory() */ + +/* + * mgsl_free_intermediate_txbuffer_memory() + * + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: None + */ +static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info) +{ + int i; + + for ( i=0; inum_tx_holding_buffers; ++i ) { + kfree(info->tx_holding_buffers[i].buffer); + info->tx_holding_buffers[i].buffer = NULL; + } + + info->get_tx_holding_index = 0; + info->put_tx_holding_index = 0; + info->tx_holding_count = 0; + +} /* end of mgsl_free_intermediate_txbuffer_memory() */ + + +/* + * load_next_tx_holding_buffer() + * + * attempts to load the next buffered tx request into the + * tx dma buffers + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: true if next buffered tx request loaded + * into adapter's tx dma buffer, + * false otherwise + */ +static bool load_next_tx_holding_buffer(struct mgsl_struct *info) +{ + bool ret = false; + + if ( info->tx_holding_count ) { + /* determine if we have enough tx dma buffers + * to accommodate the next tx frame + */ + struct tx_holding_buffer *ptx = + &info->tx_holding_buffers[info->get_tx_holding_index]; + int num_free = num_free_tx_dma_buffers(info); + int num_needed = ptx->buffer_size / DMABUFFERSIZE; + if ( ptx->buffer_size % DMABUFFERSIZE ) + ++num_needed; + + if (num_needed <= num_free) { + info->xmit_cnt = ptx->buffer_size; + mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size); + + --info->tx_holding_count; + if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers) + info->get_tx_holding_index=0; + + /* restart transmit timer */ + mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000)); + + ret = true; + } + } + + return ret; +} + +/* + * save_tx_buffer_request() + * + * attempt to store transmit frame request for later transmission + * + * Arguments: + * + * info pointer to device instance data + * Buffer pointer to buffer containing frame to load + * BufferSize size in bytes of frame in Buffer + * + * Return Value: 1 if able to store, 0 otherwise + */ +static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize) +{ + struct tx_holding_buffer *ptx; + + if ( info->tx_holding_count >= info->num_tx_holding_buffers ) { + return 0; /* all buffers in use */ + } + + ptx = &info->tx_holding_buffers[info->put_tx_holding_index]; + ptx->buffer_size = BufferSize; + memcpy( ptx->buffer, Buffer, BufferSize); + + ++info->tx_holding_count; + if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers) + info->put_tx_holding_index=0; + + return 1; +} + +static int mgsl_claim_resources(struct mgsl_struct *info) +{ + if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) { + printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->io_base); + return -ENODEV; + } + info->io_addr_requested = true; + + if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags, + info->device_name, info ) < 0 ) { + printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, info->irq_level ); + goto errout; + } + info->irq_requested = true; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) { + printk( "%s(%d):mem addr conflict device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base); + goto errout; + } + info->shared_mem_requested = true; + if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) { + printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset); + goto errout; + } + info->lcr_mem_requested = true; + + info->memory_base = ioremap_nocache(info->phys_memory_base, + 0x40000); + if (!info->memory_base) { + printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + goto errout; + } + + if ( !mgsl_memory_test(info) ) { + printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + goto errout; + } + + info->lcr_base = ioremap_nocache(info->phys_lcr_base, + PAGE_SIZE); + if (!info->lcr_base) { + printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); + goto errout; + } + info->lcr_base += info->lcr_offset; + + } else { + /* claim DMA channel */ + + if (request_dma(info->dma_level,info->device_name) < 0){ + printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n", + __FILE__,__LINE__,info->device_name, info->dma_level ); + mgsl_release_resources( info ); + return -ENODEV; + } + info->dma_requested = true; + + /* ISA adapter uses bus master DMA */ + set_dma_mode(info->dma_level,DMA_MODE_CASCADE); + enable_dma(info->dma_level); + } + + if ( mgsl_allocate_dma_buffers(info) < 0 ) { + printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n", + __FILE__,__LINE__,info->device_name, info->dma_level ); + goto errout; + } + + return 0; +errout: + mgsl_release_resources(info); + return -ENODEV; + +} /* end of mgsl_claim_resources() */ + +static void mgsl_release_resources(struct mgsl_struct *info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_release_resources(%s) entry\n", + __FILE__,__LINE__,info->device_name ); + + if ( info->irq_requested ) { + free_irq(info->irq_level, info); + info->irq_requested = false; + } + if ( info->dma_requested ) { + disable_dma(info->dma_level); + free_dma(info->dma_level); + info->dma_requested = false; + } + mgsl_free_dma_buffers(info); + mgsl_free_intermediate_rxbuffer_memory(info); + mgsl_free_intermediate_txbuffer_memory(info); + + if ( info->io_addr_requested ) { + release_region(info->io_base,info->io_addr_size); + info->io_addr_requested = false; + } + if ( info->shared_mem_requested ) { + release_mem_region(info->phys_memory_base,0x40000); + info->shared_mem_requested = false; + } + if ( info->lcr_mem_requested ) { + release_mem_region(info->phys_lcr_base + info->lcr_offset,128); + info->lcr_mem_requested = false; + } + if (info->memory_base){ + iounmap(info->memory_base); + info->memory_base = NULL; + } + if (info->lcr_base){ + iounmap(info->lcr_base - info->lcr_offset); + info->lcr_base = NULL; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_release_resources(%s) exit\n", + __FILE__,__LINE__,info->device_name ); + +} /* end of mgsl_release_resources() */ + +/* mgsl_add_device() + * + * Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_add_device( struct mgsl_struct *info ) +{ + info->next_device = NULL; + info->line = mgsl_device_count; + sprintf(info->device_name,"ttySL%d",info->line); + + if (info->line < MAX_TOTAL_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + + if (txdmabufs[info->line]) { + info->num_tx_dma_buffers = txdmabufs[info->line]; + if (info->num_tx_dma_buffers < 1) + info->num_tx_dma_buffers = 1; + } + + if (txholdbufs[info->line]) { + info->num_tx_holding_buffers = txholdbufs[info->line]; + if (info->num_tx_holding_buffers < 1) + info->num_tx_holding_buffers = 1; + else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS) + info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS; + } + } + + mgsl_device_count++; + + if ( !mgsl_device_list ) + mgsl_device_list = info; + else { + struct mgsl_struct *current_dev = mgsl_device_list; + while( current_dev->next_device ) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if ( info->max_frame_size < 4096 ) + info->max_frame_size = 4096; + else if ( info->max_frame_size > 65535 ) + info->max_frame_size = 65535; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n", + info->hw_version + 1, info->device_name, info->io_base, info->irq_level, + info->phys_memory_base, info->phys_lcr_base, + info->max_frame_size ); + } else { + printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n", + info->device_name, info->io_base, info->irq_level, info->dma_level, + info->max_frame_size ); + } + +#if SYNCLINK_GENERIC_HDLC + hdlcdev_init(info); +#endif + +} /* end of mgsl_add_device() */ + +static const struct tty_port_operations mgsl_port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, +}; + + +/* mgsl_allocate_device() + * + * Allocate and initialize a device instance structure + * + * Arguments: none + * Return Value: pointer to mgsl_struct if success, otherwise NULL + */ +static struct mgsl_struct* mgsl_allocate_device(void) +{ + struct mgsl_struct *info; + + info = kzalloc(sizeof(struct mgsl_struct), + GFP_KERNEL); + + if (!info) { + printk("Error can't allocate device instance data\n"); + } else { + tty_port_init(&info->port); + info->port.ops = &mgsl_port_ops; + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, mgsl_bh_handler); + info->max_frame_size = 4096; + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->irq_spinlock); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->num_tx_dma_buffers = 1; + info->num_tx_holding_buffers = 0; + } + + return info; + +} /* end of mgsl_allocate_device()*/ + +static const struct tty_operations mgsl_ops = { + .open = mgsl_open, + .close = mgsl_close, + .write = mgsl_write, + .put_char = mgsl_put_char, + .flush_chars = mgsl_flush_chars, + .write_room = mgsl_write_room, + .chars_in_buffer = mgsl_chars_in_buffer, + .flush_buffer = mgsl_flush_buffer, + .ioctl = mgsl_ioctl, + .throttle = mgsl_throttle, + .unthrottle = mgsl_unthrottle, + .send_xchar = mgsl_send_xchar, + .break_ctl = mgsl_break, + .wait_until_sent = mgsl_wait_until_sent, + .set_termios = mgsl_set_termios, + .stop = mgsl_stop, + .start = mgsl_start, + .hangup = mgsl_hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, + .get_icount = msgl_get_icount, + .proc_fops = &mgsl_proc_fops, +}; + +/* + * perform tty device initialization + */ +static int mgsl_init_tty(void) +{ + int rc; + + serial_driver = alloc_tty_driver(128); + if (!serial_driver) + return -ENOMEM; + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = "synclink"; + serial_driver->name = "ttySL"; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->init_termios.c_ispeed = 9600; + serial_driver->init_termios.c_ospeed = 9600; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &mgsl_ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + printk("%s(%d):Couldn't register serial driver\n", + __FILE__,__LINE__); + put_tty_driver(serial_driver); + serial_driver = NULL; + return rc; + } + + printk("%s %s, tty major#%d\n", + driver_name, driver_version, + serial_driver->major); + return 0; +} + +/* enumerate user specified ISA adapters + */ +static void mgsl_enum_isa_devices(void) +{ + struct mgsl_struct *info; + int i; + + /* Check for user specified ISA devices */ + + for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("ISA device specified io=%04X,irq=%d,dma=%d\n", + io[i], irq[i], dma[i] ); + + info = mgsl_allocate_device(); + if ( !info ) { + /* error allocating device instance data */ + if ( debug_level >= DEBUG_LEVEL_ERROR ) + printk( "can't allocate device instance data.\n"); + continue; + } + + /* Copy user configuration info to device instance data */ + info->io_base = (unsigned int)io[i]; + info->irq_level = (unsigned int)irq[i]; + info->irq_level = irq_canonicalize(info->irq_level); + info->dma_level = (unsigned int)dma[i]; + info->bus_type = MGSL_BUS_TYPE_ISA; + info->io_addr_size = 16; + info->irq_flags = 0; + + mgsl_add_device( info ); + } +} + +static void synclink_cleanup(void) +{ + int rc; + struct mgsl_struct *info; + struct mgsl_struct *tmp; + + printk("Unloading %s: %s\n", driver_name, driver_version); + + if (serial_driver) { + if ((rc = tty_unregister_driver(serial_driver))) + printk("%s(%d) failed to unregister tty driver err=%d\n", + __FILE__,__LINE__,rc); + put_tty_driver(serial_driver); + } + + info = mgsl_device_list; + while(info) { +#if SYNCLINK_GENERIC_HDLC + hdlcdev_exit(info); +#endif + mgsl_release_resources(info); + tmp = info; + info = info->next_device; + kfree(tmp); + } + + if (pci_registered) + pci_unregister_driver(&synclink_pci_driver); +} + +static int __init synclink_init(void) +{ + int rc; + + if (break_on_load) { + mgsl_get_text_ptr(); + BREAKPOINT(); + } + + printk("%s %s\n", driver_name, driver_version); + + mgsl_enum_isa_devices(); + if ((rc = pci_register_driver(&synclink_pci_driver)) < 0) + printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); + else + pci_registered = true; + + if ((rc = mgsl_init_tty()) < 0) + goto error; + + return 0; + +error: + synclink_cleanup(); + return rc; +} + +static void __exit synclink_exit(void) +{ + synclink_cleanup(); +} + +module_init(synclink_init); +module_exit(synclink_exit); + +/* + * usc_RTCmd() + * + * Issue a USC Receive/Transmit command to the + * Channel Command/Address Register (CCAR). + * + * Notes: + * + * The command is encoded in the most significant 5 bits <15..11> + * of the CCAR value. Bits <10..7> of the CCAR must be preserved + * and Bits <6..0> must be written as zeros. + * + * Arguments: + * + * info pointer to device information structure + * Cmd command mask (use symbolic macros) + * + * Return Value: + * + * None + */ +static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ) +{ + /* output command to CCAR in bits <15..11> */ + /* preserve bits <10..7>, bits <6..0> must be zero */ + + outw( Cmd + info->loopback_bits, info->io_base + CCAR ); + + /* Read to flush write to CCAR */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + inw( info->io_base + CCAR ); + +} /* end of usc_RTCmd() */ + +/* + * usc_DmaCmd() + * + * Issue a DMA command to the DMA Command/Address Register (DCAR). + * + * Arguments: + * + * info pointer to device information structure + * Cmd DMA command mask (usc_DmaCmd_XX Macros) + * + * Return Value: + * + * None + */ +static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ) +{ + /* write command mask to DCAR */ + outw( Cmd + info->mbre_bit, info->io_base ); + + /* Read to flush write to DCAR */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + inw( info->io_base ); + +} /* end of usc_DmaCmd() */ + +/* + * usc_OutDmaReg() + * + * Write a 16-bit value to a USC DMA register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) for write + * RegValue 16-bit value to write to register + * + * Return Value: + * + * None + * + */ +static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) +{ + /* Note: The DCAR is located at the adapter base address */ + /* Note: must preserve state of BIT8 in DCAR */ + + outw( RegAddr + info->mbre_bit, info->io_base ); + outw( RegValue, info->io_base ); + + /* Read to flush write to DCAR */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + inw( info->io_base ); + +} /* end of usc_OutDmaReg() */ + +/* + * usc_InDmaReg() + * + * Read a 16-bit value from a DMA register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) to read from + * + * Return Value: + * + * The 16-bit value read from register + * + */ +static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr ) +{ + /* Note: The DCAR is located at the adapter base address */ + /* Note: must preserve state of BIT8 in DCAR */ + + outw( RegAddr + info->mbre_bit, info->io_base ); + return inw( info->io_base ); + +} /* end of usc_InDmaReg() */ + +/* + * + * usc_OutReg() + * + * Write a 16-bit value to a USC serial channel register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) to write to + * RegValue 16-bit value to write to register + * + * Return Value: + * + * None + * + */ +static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) +{ + outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); + outw( RegValue, info->io_base + CCAR ); + + /* Read to flush write to CCAR */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + inw( info->io_base + CCAR ); + +} /* end of usc_OutReg() */ + +/* + * usc_InReg() + * + * Reads a 16-bit value from a USC serial channel register + * + * Arguments: + * + * info pointer to device extension + * RegAddr register address (number) to read from + * + * Return Value: + * + * 16-bit value read from register + */ +static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr ) +{ + outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); + return inw( info->io_base + CCAR ); + +} /* end of usc_InReg() */ + +/* usc_set_sdlc_mode() + * + * Set up the adapter for SDLC DMA communications. + * + * Arguments: info pointer to device instance data + * Return Value: NONE + */ +static void usc_set_sdlc_mode( struct mgsl_struct *info ) +{ + u16 RegValue; + bool PreSL1660; + + /* + * determine if the IUSC on the adapter is pre-SL1660. If + * not, take advantage of the UnderWait feature of more + * modern chips. If an underrun occurs and this bit is set, + * the transmitter will idle the programmed idle pattern + * until the driver has time to service the underrun. Otherwise, + * the dma controller may get the cycles previously requested + * and begin transmitting queued tx data. + */ + usc_OutReg(info,TMCR,0x1f); + RegValue=usc_InReg(info,TMDR); + PreSL1660 = (RegValue == IUSC_PRE_SL1660); + + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + { + /* + ** Channel Mode Register (CMR) + ** + ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun + ** <13> 0 0 = Transmit Disabled (initially) + ** <12> 0 1 = Consecutive Idles share common 0 + ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop + ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling + ** <3..0> 0110 Receiver Mode = HDLC/SDLC + ** + ** 1000 1110 0000 0110 = 0x8e06 + */ + RegValue = 0x8e06; + + /*-------------------------------------------------- + * ignore user options for UnderRun Actions and + * preambles + *--------------------------------------------------*/ + } + else + { + /* Channel mode Register (CMR) + * + * <15..14> 00 Tx Sub modes, Underrun Action + * <13> 0 1 = Send Preamble before opening flag + * <12> 0 1 = Consecutive Idles share common 0 + * <11..8> 0110 Transmitter mode = HDLC/SDLC + * <7..4> 0000 Rx Sub modes, addr/ctrl field handling + * <3..0> 0110 Receiver mode = HDLC/SDLC + * + * 0000 0110 0000 0110 = 0x0606 + */ + if (info->params.mode == MGSL_MODE_RAW) { + RegValue = 0x0001; /* Set Receive mode = external sync */ + + usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */ + (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12)); + + /* + * TxSubMode: + * CMR <15> 0 Don't send CRC on Tx Underrun + * CMR <14> x undefined + * CMR <13> 0 Send preamble before openning sync + * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength + * + * TxMode: + * CMR <11-8) 0100 MonoSync + * + * 0x00 0100 xxxx xxxx 04xx + */ + RegValue |= 0x0400; + } + else { + + RegValue = 0x0606; + + if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 ) + RegValue |= BIT14; + else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG ) + RegValue |= BIT15; + else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC ) + RegValue |= BIT15 + BIT14; + } + + if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE ) + RegValue |= BIT13; + } + + if ( info->params.mode == MGSL_MODE_HDLC && + (info->params.flags & HDLC_FLAG_SHARE_ZERO) ) + RegValue |= BIT12; + + if ( info->params.addr_filter != 0xff ) + { + /* set up receive address filtering */ + usc_OutReg( info, RSR, info->params.addr_filter ); + RegValue |= BIT4; + } + + usc_OutReg( info, CMR, RegValue ); + info->cmr_value = RegValue; + + /* Receiver mode Register (RMR) + * + * <15..13> 000 encoding + * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) + * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC) + * <9> 0 1 = Include Receive chars in CRC + * <8> 1 1 = Use Abort/PE bit as abort indicator + * <7..6> 00 Even parity + * <5> 0 parity disabled + * <4..2> 000 Receive Char Length = 8 bits + * <1..0> 00 Disable Receiver + * + * 0000 0101 0000 0000 = 0x0500 + */ + + RegValue = 0x0500; + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; + case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break; + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break; + } + + if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) + RegValue |= BIT9; + else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) + RegValue |= ( BIT12 | BIT10 | BIT9 ); + + usc_OutReg( info, RMR, RegValue ); + + /* Set the Receive count Limit Register (RCLR) to 0xffff. */ + /* When an opening flag of an SDLC frame is recognized the */ + /* Receive Character count (RCC) is loaded with the value in */ + /* RCLR. The RCC is decremented for each received byte. The */ + /* value of RCC is stored after the closing flag of the frame */ + /* allowing the frame size to be computed. */ + + usc_OutReg( info, RCLR, RCLRVALUE ); + + usc_RCmd( info, RCmd_SelectRicrdma_level ); + + /* Receive Interrupt Control Register (RICR) + * + * <15..8> ? RxFIFO DMA Request Level + * <7> 0 Exited Hunt IA (Interrupt Arm) + * <6> 0 Idle Received IA + * <5> 0 Break/Abort IA + * <4> 0 Rx Bound IA + * <3> 1 Queued status reflects oldest 2 bytes in FIFO + * <2> 0 Abort/PE IA + * <1> 1 Rx Overrun IA + * <0> 0 Select TC0 value for readback + * + * 0000 0000 0000 1000 = 0x000a + */ + + /* Carry over the Exit Hunt and Idle Received bits */ + /* in case they have been armed by usc_ArmEvents. */ + + RegValue = usc_InReg( info, RICR ) & 0xc0; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + usc_OutReg( info, RICR, (u16)(0x030a | RegValue) ); + else + usc_OutReg( info, RICR, (u16)(0x140a | RegValue) ); + + /* Unlatch all Rx status bits and clear Rx status IRQ Pending */ + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + + /* Transmit mode Register (TMR) + * + * <15..13> 000 encoding + * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) + * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC) + * <9> 0 1 = Tx CRC Enabled + * <8> 0 1 = Append CRC to end of transmit frame + * <7..6> 00 Transmit parity Even + * <5> 0 Transmit parity Disabled + * <4..2> 000 Tx Char Length = 8 bits + * <1..0> 00 Disable Transmitter + * + * 0000 0100 0000 0000 = 0x0400 + */ + + RegValue = 0x0400; + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; + case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break; + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break; + } + + if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) + RegValue |= BIT9 + BIT8; + else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) + RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8); + + usc_OutReg( info, TMR, RegValue ); + + usc_set_txidle( info ); + + + usc_TCmd( info, TCmd_SelectTicrdma_level ); + + /* Transmit Interrupt Control Register (TICR) + * + * <15..8> ? Transmit FIFO DMA Level + * <7> 0 Present IA (Interrupt Arm) + * <6> 0 Idle Sent IA + * <5> 1 Abort Sent IA + * <4> 1 EOF/EOM Sent IA + * <3> 0 CRC Sent IA + * <2> 1 1 = Wait for SW Trigger to Start Frame + * <1> 1 Tx Underrun IA + * <0> 0 TC0 constant on read back + * + * 0000 0000 0011 0110 = 0x0036 + */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + usc_OutReg( info, TICR, 0x0736 ); + else + usc_OutReg( info, TICR, 0x1436 ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + + /* + ** Transmit Command/Status Register (TCSR) + ** + ** <15..12> 0000 TCmd + ** <11> 0/1 UnderWait + ** <10..08> 000 TxIdle + ** <7> x PreSent + ** <6> x IdleSent + ** <5> x AbortSent + ** <4> x EOF/EOM Sent + ** <3> x CRC Sent + ** <2> x All Sent + ** <1> x TxUnder + ** <0> x TxEmpty + ** + ** 0000 0000 0000 0000 = 0x0000 + */ + info->tcsr_value = 0; + + if ( !PreSL1660 ) + info->tcsr_value |= TCSR_UNDERWAIT; + + usc_OutReg( info, TCSR, info->tcsr_value ); + + /* Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Source = Disabled + * <13..12> 00 counter 0 Source = Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> XXX TxCLK comes from Port 0 + * <2..0> XXX RxCLK comes from Port 1 + * + * 0000 1111 0111 0111 = 0x0f77 + */ + + RegValue = 0x0f40; + + if ( info->params.flags & HDLC_FLAG_RXC_DPLL ) + RegValue |= 0x0003; /* RxCLK from DPLL */ + else if ( info->params.flags & HDLC_FLAG_RXC_BRG ) + RegValue |= 0x0004; /* RxCLK from BRG0 */ + else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN) + RegValue |= 0x0006; /* RxCLK from TXC Input */ + else + RegValue |= 0x0007; /* RxCLK from Port1 */ + + if ( info->params.flags & HDLC_FLAG_TXC_DPLL ) + RegValue |= 0x0018; /* TxCLK from DPLL */ + else if ( info->params.flags & HDLC_FLAG_TXC_BRG ) + RegValue |= 0x0020; /* TxCLK from BRG0 */ + else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN) + RegValue |= 0x0038; /* RxCLK from TXC Input */ + else + RegValue |= 0x0030; /* TxCLK from Port0 */ + + usc_OutReg( info, CMCR, RegValue ); + + + /* Hardware Configuration Register (HCR) + * + * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4 + * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div + * <12> 0 CVOK:0=report code violation in biphase + * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4 + * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level + * <7..6> 00 reserved + * <5> 0 BRG1 mode:0=continuous,1=single cycle + * <4> X BRG1 Enable + * <3..2> 00 reserved + * <1> 0 BRG0 mode:0=continuous,1=single cycle + * <0> 0 BRG0 Enable + */ + + RegValue = 0x0000; + + if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) { + u32 XtalSpeed; + u32 DpllDivisor; + u16 Tc; + + /* DPLL is enabled. Use BRG1 to provide continuous reference clock */ + /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + XtalSpeed = 11059200; + else + XtalSpeed = 14745600; + + if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { + DpllDivisor = 16; + RegValue |= BIT10; + } + else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { + DpllDivisor = 8; + RegValue |= BIT11; + } + else + DpllDivisor = 32; + + /* Tc = (Xtal/Speed) - 1 */ + /* If twice the remainder of (Xtal/Speed) is greater than Speed */ + /* then rounding up gives a more precise time constant. Instead */ + /* of rounding up and then subtracting 1 we just don't subtract */ + /* the one in this case. */ + + /*-------------------------------------------------- + * ejz: for DPLL mode, application should use the + * same clock speed as the partner system, even + * though clocking is derived from the input RxData. + * In case the user uses a 0 for the clock speed, + * default to 0xffffffff and don't try to divide by + * zero + *--------------------------------------------------*/ + if ( info->params.clock_speed ) + { + Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed); + if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2) + / info->params.clock_speed) ) + Tc--; + } + else + Tc = -1; + + + /* Write 16-bit Time Constant for BRG1 */ + usc_OutReg( info, TC1R, Tc ); + + RegValue |= BIT4; /* enable BRG1 */ + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZ: + case HDLC_ENCODING_NRZB: + case HDLC_ENCODING_NRZI_MARK: + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break; + case HDLC_ENCODING_BIPHASE_MARK: + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break; + case HDLC_ENCODING_BIPHASE_LEVEL: + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break; + } + } + + usc_OutReg( info, HCR, RegValue ); + + + /* Channel Control/status Register (CCSR) + * + * <15> X RCC FIFO Overflow status (RO) + * <14> X RCC FIFO Not Empty status (RO) + * <13> 0 1 = Clear RCC FIFO (WO) + * <12> X DPLL Sync (RW) + * <11> X DPLL 2 Missed Clocks status (RO) + * <10> X DPLL 1 Missed Clock status (RO) + * <9..8> 00 DPLL Resync on rising and falling edges (RW) + * <7> X SDLC Loop On status (RO) + * <6> X SDLC Loop Send status (RO) + * <5> 1 Bypass counters for TxClk and RxClk (RW) + * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) + * <1..0> 00 reserved + * + * 0000 0000 0010 0000 = 0x0020 + */ + + usc_OutReg( info, CCSR, 0x1020 ); + + + if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) { + usc_OutReg( info, SICR, + (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) ); + } + + + /* enable Master Interrupt Enable bit (MIE) */ + usc_EnableMasterIrqBit( info ); + + usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA + + TRANSMIT_STATUS + TRANSMIT_DATA + MISC); + + /* arm RCC underflow interrupt */ + usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3)); + usc_EnableInterrupts(info, MISC); + + info->mbre_bit = 0; + outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ + usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ + info->mbre_bit = BIT8; + outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */ + + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable DMAEN (Port 7, Bit 14) */ + /* This connects the DMA request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14)); + } + + /* DMA Control Register (DCR) + * + * <15..14> 10 Priority mode = Alternating Tx/Rx + * 01 Rx has priority + * 00 Tx has priority + * + * <13> 1 Enable Priority Preempt per DCR<15..14> + * (WARNING DCR<11..10> must be 00 when this is 1) + * 0 Choose activate channel per DCR<11..10> + * + * <12> 0 Little Endian for Array/List + * <11..10> 00 Both Channels can use each bus grant + * <9..6> 0000 reserved + * <5> 0 7 CLK - Minimum Bus Re-request Interval + * <4> 0 1 = drive D/C and S/D pins + * <3> 1 1 = Add one wait state to all DMA cycles. + * <2> 0 1 = Strobe /UAS on every transfer. + * <1..0> 11 Addr incrementing only affects LS24 bits + * + * 0110 0000 0000 1011 = 0x600b + */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* PCI adapter does not need DMA wait state */ + usc_OutDmaReg( info, DCR, 0xa00b ); + } + else + usc_OutDmaReg( info, DCR, 0x800b ); + + + /* Receive DMA mode Register (RDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry + * <12> 1 Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on RxBound + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (write as 0s) + * + * 1111 0010 0000 0000 = 0xf200 + */ + + usc_OutDmaReg( info, RDMR, 0xf200 ); + + + /* Transmit DMA mode Register (TDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 TCBinA/L = fetch Tx Control Block from List entry + * <12> 1 Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on end of frame + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (Read Only so write as 0) + * + * 1111 0010 0000 0000 = 0xf200 + */ + + usc_OutDmaReg( info, TDMR, 0xf200 ); + + + /* DMA Interrupt Control Register (DICR) + * + * <15> 1 DMA Interrupt Enable + * <14> 0 1 = Disable IEO from USC + * <13> 0 1 = Don't provide vector during IntAck + * <12> 1 1 = Include status in Vector + * <10..2> 0 reserved, Must be 0s + * <1> 0 1 = Rx DMA Interrupt Enabled + * <0> 0 1 = Tx DMA Interrupt Enabled + * + * 1001 0000 0000 0000 = 0x9000 + */ + + usc_OutDmaReg( info, DICR, 0x9000 ); + + usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */ + usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */ + usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */ + + /* Channel Control Register (CCR) + * + * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs) + * <13> 0 Trigger Tx on SW Command Disabled + * <12> 0 Flag Preamble Disabled + * <11..10> 00 Preamble Length + * <9..8> 00 Preamble Pattern + * <7..6> 10 Use 32-bit Rx status Blocks (RSBs) + * <5> 0 Trigger Rx on SW Command Disabled + * <4..0> 0 reserved + * + * 1000 0000 1000 0000 = 0x8080 + */ + + RegValue = 0x8080; + + switch ( info->params.preamble_length ) { + case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break; + case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break; + case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break; + } + + switch ( info->params.preamble ) { + case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break; + case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break; + case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break; + case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break; + } + + usc_OutReg( info, CCR, RegValue ); + + + /* + * Burst/Dwell Control Register + * + * <15..8> 0x20 Maximum number of transfers per bus grant + * <7..0> 0x00 Maximum number of clock cycles per bus grant + */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* don't limit bus occupancy on PCI adapter */ + usc_OutDmaReg( info, BDCR, 0x0000 ); + } + else + usc_OutDmaReg( info, BDCR, 0x2000 ); + + usc_stop_transmitter(info); + usc_stop_receiver(info); + +} /* end of usc_set_sdlc_mode() */ + +/* usc_enable_loopback() + * + * Set the 16C32 for internal loopback mode. + * The TxCLK and RxCLK signals are generated from the BRG0 and + * the TxD is looped back to the RxD internally. + * + * Arguments: info pointer to device instance data + * enable 1 = enable loopback, 0 = disable + * Return Value: None + */ +static void usc_enable_loopback(struct mgsl_struct *info, int enable) +{ + if (enable) { + /* blank external TXD output */ + usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6)); + + /* Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Disabled + * <13..12> 00 counter 0 Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> 100 TxCLK comes from BRG0 + * <2..0> 100 RxCLK comes from BRG0 + * + * 0000 1111 0110 0100 = 0x0f64 + */ + + usc_OutReg( info, CMCR, 0x0f64 ); + + /* Write 16-bit Time Constant for BRG0 */ + /* use clock speed if available, otherwise use 8 for diagnostics */ + if (info->params.clock_speed) { + if (info->bus_type == MGSL_BUS_TYPE_PCI) + usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1)); + else + usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1)); + } else + usc_OutReg(info, TC0R, (u16)8); + + /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0 + mode = Continuous Set Bit 0 to enable BRG0. */ + usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004)); + + /* set Internal Data loopback mode */ + info->loopback_bits = 0x300; + outw( 0x0300, info->io_base + CCAR ); + } else { + /* enable external TXD output */ + usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6)); + + /* clear Internal Data loopback mode */ + info->loopback_bits = 0; + outw( 0,info->io_base + CCAR ); + } + +} /* end of usc_enable_loopback() */ + +/* usc_enable_aux_clock() + * + * Enabled the AUX clock output at the specified frequency. + * + * Arguments: + * + * info pointer to device extension + * data_rate data rate of clock in bits per second + * A data rate of 0 disables the AUX clock. + * + * Return Value: None + */ +static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate ) +{ + u32 XtalSpeed; + u16 Tc; + + if ( data_rate ) { + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + XtalSpeed = 11059200; + else + XtalSpeed = 14745600; + + + /* Tc = (Xtal/Speed) - 1 */ + /* If twice the remainder of (Xtal/Speed) is greater than Speed */ + /* then rounding up gives a more precise time constant. Instead */ + /* of rounding up and then subtracting 1 we just don't subtract */ + /* the one in this case. */ + + + Tc = (u16)(XtalSpeed/data_rate); + if ( !(((XtalSpeed % data_rate) * 2) / data_rate) ) + Tc--; + + /* Write 16-bit Time Constant for BRG0 */ + usc_OutReg( info, TC0R, Tc ); + + /* + * Hardware Configuration Register (HCR) + * Clear Bit 1, BRG0 mode = Continuous + * Set Bit 0 to enable BRG0. + */ + + usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); + } else { + /* data rate == 0 so turn off BRG0 */ + usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); + } + +} /* end of usc_enable_aux_clock() */ + +/* + * + * usc_process_rxoverrun_sync() + * + * This function processes a receive overrun by resetting the + * receive DMA buffers and issuing a Purge Rx FIFO command + * to allow the receiver to continue receiving. + * + * Arguments: + * + * info pointer to device extension + * + * Return Value: None + */ +static void usc_process_rxoverrun_sync( struct mgsl_struct *info ) +{ + int start_index; + int end_index; + int frame_start_index; + bool start_of_frame_found = false; + bool end_of_frame_found = false; + bool reprogram_dma = false; + + DMABUFFERENTRY *buffer_list = info->rx_buffer_list; + u32 phys_addr; + + usc_DmaCmd( info, DmaCmd_PauseRxChannel ); + usc_RCmd( info, RCmd_EnterHuntmode ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + /* CurrentRxBuffer points to the 1st buffer of the next */ + /* possibly available receive frame. */ + + frame_start_index = start_index = end_index = info->current_rx_buffer; + + /* Search for an unfinished string of buffers. This means */ + /* that a receive frame started (at least one buffer with */ + /* count set to zero) but there is no terminiting buffer */ + /* (status set to non-zero). */ + + while( !buffer_list[end_index].count ) + { + /* Count field has been reset to zero by 16C32. */ + /* This buffer is currently in use. */ + + if ( !start_of_frame_found ) + { + start_of_frame_found = true; + frame_start_index = end_index; + end_of_frame_found = false; + } + + if ( buffer_list[end_index].status ) + { + /* Status field has been set by 16C32. */ + /* This is the last buffer of a received frame. */ + + /* We want to leave the buffers for this frame intact. */ + /* Move on to next possible frame. */ + + start_of_frame_found = false; + end_of_frame_found = true; + } + + /* advance to next buffer entry in linked list */ + end_index++; + if ( end_index == info->rx_buffer_count ) + end_index = 0; + + if ( start_index == end_index ) + { + /* The entire list has been searched with all Counts == 0 and */ + /* all Status == 0. The receive buffers are */ + /* completely screwed, reset all receive buffers! */ + mgsl_reset_rx_dma_buffers( info ); + frame_start_index = 0; + start_of_frame_found = false; + reprogram_dma = true; + break; + } + } + + if ( start_of_frame_found && !end_of_frame_found ) + { + /* There is an unfinished string of receive DMA buffers */ + /* as a result of the receiver overrun. */ + + /* Reset the buffers for the unfinished frame */ + /* and reprogram the receive DMA controller to start */ + /* at the 1st buffer of unfinished frame. */ + + start_index = frame_start_index; + + do + { + *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE; + + /* Adjust index for wrap around. */ + if ( start_index == info->rx_buffer_count ) + start_index = 0; + + } while( start_index != end_index ); + + reprogram_dma = true; + } + + if ( reprogram_dma ) + { + usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS); + usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS); + + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + + /* program 16C32 with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[frame_start_index].phys_entry; + usc_OutDmaReg( info, NRARL, (u16)phys_addr ); + usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_EnableInterrupts( info, RECEIVE_STATUS ); + + /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ + /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ + + usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) + usc_EnableReceiver(info,ENABLE_AUTO_DCD); + else + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } + else + { + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + } + +} /* end of usc_process_rxoverrun_sync() */ + +/* usc_stop_receiver() + * + * Disable USC receiver + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_stop_receiver( struct mgsl_struct *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_stop_receiver(%s)\n", + __FILE__,__LINE__, info->device_name ); + + /* Disable receive DMA channel. */ + /* This also disables receive DMA channel interrupts */ + usc_DmaCmd( info, DmaCmd_ResetRxChannel ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS ); + + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + info->rx_enabled = false; + info->rx_overflow = false; + info->rx_rcc_underrun = false; + +} /* end of stop_receiver() */ + +/* usc_start_receiver() + * + * Enable the USC receiver + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_start_receiver( struct mgsl_struct *info ) +{ + u32 phys_addr; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_start_receiver(%s)\n", + __FILE__,__LINE__, info->device_name ); + + mgsl_reset_rx_dma_buffers( info ); + usc_stop_receiver( info ); + + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* DMA mode Transfers */ + /* Program the DMA controller. */ + /* Enable the DMA controller end of buffer interrupt. */ + + /* program 16C32 with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NRARL, (u16)phys_addr ); + usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_EnableInterrupts( info, RECEIVE_STATUS ); + + /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ + /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ + + usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) + usc_EnableReceiver(info,ENABLE_AUTO_DCD); + else + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } else { + usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS); + usc_EnableInterrupts(info, RECEIVE_DATA); + + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + usc_RCmd( info, RCmd_EnterHuntmode ); + + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } + + usc_OutReg( info, CCSR, 0x1020 ); + + info->rx_enabled = true; + +} /* end of usc_start_receiver() */ + +/* usc_start_transmitter() + * + * Enable the USC transmitter and send a transmit frame if + * one is loaded in the DMA buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_start_transmitter( struct mgsl_struct *info ) +{ + u32 phys_addr; + unsigned int FrameSize; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_start_transmitter(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if ( info->xmit_cnt ) { + + /* If auto RTS enabled and RTS is inactive, then assert */ + /* RTS and set a flag indicating that the driver should */ + /* negate RTS when the transmission completes. */ + + info->drop_rts_on_tx_done = false; + + if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { + usc_get_serial_signals( info ); + if ( !(info->serial_signals & SerialSignal_RTS) ) { + info->serial_signals |= SerialSignal_RTS; + usc_set_serial_signals( info ); + info->drop_rts_on_tx_done = true; + } + } + + + if ( info->params.mode == MGSL_MODE_ASYNC ) { + if ( !info->tx_active ) { + usc_UnlatchTxstatusBits(info, TXSTATUS_ALL); + usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA); + usc_EnableInterrupts(info, TRANSMIT_DATA); + usc_load_txfifo(info); + } + } else { + /* Disable transmit DMA controller while programming. */ + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + + /* Transmit DMA buffer is loaded, so program USC */ + /* to send the frame contained in the buffers. */ + + FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc; + + /* if operating in Raw sync mode, reset the rcc component + * of the tx dma buffer entry, otherwise, the serial controller + * will send a closing sync char after this count. + */ + if ( info->params.mode == MGSL_MODE_RAW ) + info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0; + + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + usc_OutReg( info, TCLR, (u16)FrameSize ); + + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* Program the address of the 1st DMA Buffer Entry in linked list */ + phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry; + usc_OutDmaReg( info, NTARL, (u16)phys_addr ); + usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + usc_EnableInterrupts( info, TRANSMIT_STATUS ); + + if ( info->params.mode == MGSL_MODE_RAW && + info->num_tx_dma_buffers > 1 ) { + /* When running external sync mode, attempt to 'stream' transmit */ + /* by filling tx dma buffers as they become available. To do this */ + /* we need to enable Tx DMA EOB Status interrupts : */ + /* */ + /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */ + /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */ + + usc_OutDmaReg( info, TDIAR, BIT2|BIT3 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) ); + } + + /* Initialize Transmit DMA Channel */ + usc_DmaCmd( info, DmaCmd_InitTxChannel ); + + usc_TCmd( info, TCmd_SendFrame ); + + mod_timer(&info->tx_timer, jiffies + + msecs_to_jiffies(5000)); + } + info->tx_active = true; + } + + if ( !info->tx_enabled ) { + info->tx_enabled = true; + if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) + usc_EnableTransmitter(info,ENABLE_AUTO_CTS); + else + usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); + } + +} /* end of usc_start_transmitter() */ + +/* usc_stop_transmitter() + * + * Stops the transmitter and DMA + * + * Arguments: info pointer to device isntance data + * Return Value: None + */ +static void usc_stop_transmitter( struct mgsl_struct *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_stop_transmitter(%s)\n", + __FILE__,__LINE__, info->device_name ); + + del_timer(&info->tx_timer); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA ); + usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA ); + + usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL); + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + info->tx_enabled = false; + info->tx_active = false; + +} /* end of usc_stop_transmitter() */ + +/* usc_load_txfifo() + * + * Fill the transmit FIFO until the FIFO is full or + * there is no more data to load. + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void usc_load_txfifo( struct mgsl_struct *info ) +{ + int Fifocount; + u8 TwoBytes[2]; + + if ( !info->xmit_cnt && !info->x_char ) + return; + + /* Select transmit FIFO status readback in TICR */ + usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); + + /* load the Transmit FIFO until FIFOs full or all data sent */ + + while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) { + /* there is more space in the transmit FIFO and */ + /* there is more data in transmit buffer */ + + if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) { + /* write a 16-bit word from transmit buffer to 16C32 */ + + TwoBytes[0] = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + TwoBytes[1] = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + + outw( *((u16 *)TwoBytes), info->io_base + DATAREG); + + info->xmit_cnt -= 2; + info->icount.tx += 2; + } else { + /* only 1 byte left to transmit or 1 FIFO slot left */ + + outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY), + info->io_base + CCAR ); + + if (info->x_char) { + /* transmit pending high priority char */ + outw( info->x_char,info->io_base + CCAR ); + info->x_char = 0; + } else { + outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR ); + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + info->icount.tx++; + } + } + +} /* end of usc_load_txfifo() */ + +/* usc_reset() + * + * Reset the adapter to a known state and prepare it for further use. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_reset( struct mgsl_struct *info ) +{ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + int i; + u32 readval; + + /* Set BIT30 of Misc Control Register */ + /* (Local Control Register 0x50) to force reset of USC. */ + + volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); + u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28); + + info->misc_ctrl_value |= BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* + * Force at least 170ns delay before clearing + * reset bit. Each read from LCR takes at least + * 30ns so 10 times for 300ns to be safe. + */ + for(i=0;i<10;i++) + readval = *MiscCtrl; + + info->misc_ctrl_value &= ~BIT30; + *MiscCtrl = info->misc_ctrl_value; + + *LCR0BRDR = BUS_DESCRIPTOR( + 1, // Write Strobe Hold (0-3) + 2, // Write Strobe Delay (0-3) + 2, // Read Strobe Delay (0-3) + 0, // NWDD (Write data-data) (0-3) + 4, // NWAD (Write Addr-data) (0-31) + 0, // NXDA (Read/Write Data-Addr) (0-3) + 0, // NRDD (Read Data-Data) (0-3) + 5 // NRAD (Read Addr-Data) (0-31) + ); + } else { + /* do HW reset */ + outb( 0,info->io_base + 8 ); + } + + info->mbre_bit = 0; + info->loopback_bits = 0; + info->usc_idle_mode = 0; + + /* + * Program the Bus Configuration Register (BCR) + * + * <15> 0 Don't use separate address + * <14..6> 0 reserved + * <5..4> 00 IAckmode = Default, don't care + * <3> 1 Bus Request Totem Pole output + * <2> 1 Use 16 Bit data bus + * <1> 0 IRQ Totem Pole output + * <0> 0 Don't Shift Right Addr + * + * 0000 0000 0000 1100 = 0x000c + * + * By writing to io_base + SDPIN the Wait/Ack pin is + * programmed to work as a Wait pin. + */ + + outw( 0x000c,info->io_base + SDPIN ); + + + outw( 0,info->io_base ); + outw( 0,info->io_base + CCAR ); + + /* select little endian byte ordering */ + usc_RTCmd( info, RTCmd_SelectLittleEndian ); + + + /* Port Control Register (PCR) + * + * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled) + * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled) + * <11..10> 00 Port 5 is Input (No Connect, Don't Care) + * <9..8> 00 Port 4 is Input (No Connect, Don't Care) + * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled ) + * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled ) + * <3..2> 01 Port 1 is Input (Dedicated RxC) + * <1..0> 01 Port 0 is Input (Dedicated TxC) + * + * 1111 0000 1111 0101 = 0xf0f5 + */ + + usc_OutReg( info, PCR, 0xf0f5 ); + + + /* + * Input/Output Control Register + * + * <15..14> 00 CTS is active low input + * <13..12> 00 DCD is active low input + * <11..10> 00 TxREQ pin is input (DSR) + * <9..8> 00 RxREQ pin is input (RI) + * <7..6> 00 TxD is output (Transmit Data) + * <5..3> 000 TxC Pin in Input (14.7456MHz Clock) + * <2..0> 100 RxC is Output (drive with BRG0) + * + * 0000 0000 0000 0100 = 0x0004 + */ + + usc_OutReg( info, IOCR, 0x0004 ); + +} /* end of usc_reset() */ + +/* usc_set_async_mode() + * + * Program adapter for asynchronous communications. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_async_mode( struct mgsl_struct *info ) +{ + u16 RegValue; + + /* disable interrupts while programming USC */ + usc_DisableMasterIrqBit( info ); + + outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ + usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ + + usc_loopback_frame( info ); + + /* Channel mode Register (CMR) + * + * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit + * <13..12> 00 00 = 16X Clock + * <11..8> 0000 Transmitter mode = Asynchronous + * <7..6> 00 reserved? + * <5..4> 00 Rx Sub modes, 00 = 16X Clock + * <3..0> 0000 Receiver mode = Asynchronous + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + if ( info->params.stop_bits != 1 ) + RegValue |= BIT14; + usc_OutReg( info, CMR, RegValue ); + + + /* Receiver mode Register (RMR) + * + * <15..13> 000 encoding = None + * <12..08> 00000 reserved (Sync Only) + * <7..6> 00 Even parity + * <5> 0 parity disabled + * <4..2> 000 Receive Char Length = 8 bits + * <1..0> 00 Disable Receiver + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + + if ( info->params.data_bits != 8 ) + RegValue |= BIT4+BIT3+BIT2; + + if ( info->params.parity != ASYNC_PARITY_NONE ) { + RegValue |= BIT5; + if ( info->params.parity != ASYNC_PARITY_ODD ) + RegValue |= BIT6; + } + + usc_OutReg( info, RMR, RegValue ); + + + /* Set IRQ trigger level */ + + usc_RCmd( info, RCmd_SelectRicrIntLevel ); + + + /* Receive Interrupt Control Register (RICR) + * + * <15..8> ? RxFIFO IRQ Request Level + * + * Note: For async mode the receive FIFO level must be set + * to 0 to avoid the situation where the FIFO contains fewer bytes + * than the trigger level and no more data is expected. + * + * <7> 0 Exited Hunt IA (Interrupt Arm) + * <6> 0 Idle Received IA + * <5> 0 Break/Abort IA + * <4> 0 Rx Bound IA + * <3> 0 Queued status reflects oldest byte in FIFO + * <2> 0 Abort/PE IA + * <1> 0 Rx Overrun IA + * <0> 0 Select TC0 value for readback + * + * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB) + */ + + usc_OutReg( info, RICR, 0x0000 ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + + + /* Transmit mode Register (TMR) + * + * <15..13> 000 encoding = None + * <12..08> 00000 reserved (Sync Only) + * <7..6> 00 Transmit parity Even + * <5> 0 Transmit parity Disabled + * <4..2> 000 Tx Char Length = 8 bits + * <1..0> 00 Disable Transmitter + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + + if ( info->params.data_bits != 8 ) + RegValue |= BIT4+BIT3+BIT2; + + if ( info->params.parity != ASYNC_PARITY_NONE ) { + RegValue |= BIT5; + if ( info->params.parity != ASYNC_PARITY_ODD ) + RegValue |= BIT6; + } + + usc_OutReg( info, TMR, RegValue ); + + usc_set_txidle( info ); + + + /* Set IRQ trigger level */ + + usc_TCmd( info, TCmd_SelectTicrIntLevel ); + + + /* Transmit Interrupt Control Register (TICR) + * + * <15..8> ? Transmit FIFO IRQ Level + * <7> 0 Present IA (Interrupt Arm) + * <6> 1 Idle Sent IA + * <5> 0 Abort Sent IA + * <4> 0 EOF/EOM Sent IA + * <3> 0 CRC Sent IA + * <2> 0 1 = Wait for SW Trigger to Start Frame + * <1> 0 Tx Underrun IA + * <0> 0 TC0 constant on read back + * + * 0000 0000 0100 0000 = 0x0040 + */ + + usc_OutReg( info, TICR, 0x1f40 ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + + usc_enable_async_clock( info, info->params.data_rate ); + + + /* Channel Control/status Register (CCSR) + * + * <15> X RCC FIFO Overflow status (RO) + * <14> X RCC FIFO Not Empty status (RO) + * <13> 0 1 = Clear RCC FIFO (WO) + * <12> X DPLL in Sync status (RO) + * <11> X DPLL 2 Missed Clocks status (RO) + * <10> X DPLL 1 Missed Clock status (RO) + * <9..8> 00 DPLL Resync on rising and falling edges (RW) + * <7> X SDLC Loop On status (RO) + * <6> X SDLC Loop Send status (RO) + * <5> 1 Bypass counters for TxClk and RxClk (RW) + * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) + * <1..0> 00 reserved + * + * 0000 0000 0010 0000 = 0x0020 + */ + + usc_OutReg( info, CCSR, 0x0020 ); + + usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA + + RECEIVE_DATA + RECEIVE_STATUS ); + + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA + + RECEIVE_DATA + RECEIVE_STATUS ); + + usc_EnableMasterIrqBit( info ); + + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); + } + + if (info->params.loopback) { + info->loopback_bits = 0x300; + outw(0x0300, info->io_base + CCAR); + } + +} /* end of usc_set_async_mode() */ + +/* usc_loopback_frame() + * + * Loop back a small (2 byte) dummy SDLC frame. + * Interrupts and DMA are NOT used. The purpose of this is to + * clear any 'stale' status info left over from running in async mode. + * + * The 16C32 shows the strange behaviour of marking the 1st + * received SDLC frame with a CRC error even when there is no + * CRC error. To get around this a small dummy from of 2 bytes + * is looped back when switching from async to sync mode. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_loopback_frame( struct mgsl_struct *info ) +{ + int i; + unsigned long oldmode = info->params.mode; + + info->params.mode = MGSL_MODE_HDLC; + + usc_DisableMasterIrqBit( info ); + + usc_set_sdlc_mode( info ); + usc_enable_loopback( info, 1 ); + + /* Write 16-bit Time Constant for BRG0 */ + usc_OutReg( info, TC0R, 0 ); + + /* Channel Control Register (CCR) + * + * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs) + * <13> 0 Trigger Tx on SW Command Disabled + * <12> 0 Flag Preamble Disabled + * <11..10> 00 Preamble Length = 8-Bits + * <9..8> 01 Preamble Pattern = flags + * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs) + * <5> 0 Trigger Rx on SW Command Disabled + * <4..0> 0 reserved + * + * 0000 0001 0000 0000 = 0x0100 + */ + + usc_OutReg( info, CCR, 0x0100 ); + + /* SETUP RECEIVER */ + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + + /* SETUP TRANSMITTER */ + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + usc_OutReg( info, TCLR, 2 ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* unlatch Tx status bits, and start transmit channel. */ + usc_UnlatchTxstatusBits(info,TXSTATUS_ALL); + outw(0,info->io_base + DATAREG); + + /* ENABLE TRANSMITTER */ + usc_TCmd( info, TCmd_SendFrame ); + usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); + + /* WAIT FOR RECEIVE COMPLETE */ + for (i=0 ; i<1000 ; i++) + if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1)) + break; + + /* clear Internal Data loopback mode */ + usc_enable_loopback(info, 0); + + usc_EnableMasterIrqBit(info); + + info->params.mode = oldmode; + +} /* end of usc_loopback_frame() */ + +/* usc_set_sync_mode() Programs the USC for SDLC communications. + * + * Arguments: info pointer to adapter info structure + * Return Value: None + */ +static void usc_set_sync_mode( struct mgsl_struct *info ) +{ + usc_loopback_frame( info ); + usc_set_sdlc_mode( info ); + + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); + } + + usc_enable_aux_clock(info, info->params.clock_speed); + + if (info->params.loopback) + usc_enable_loopback(info,1); + +} /* end of mgsl_set_sync_mode() */ + +/* usc_set_txidle() Set the HDLC idle mode for the transmitter. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_txidle( struct mgsl_struct *info ) +{ + u16 usc_idle_mode = IDLEMODE_FLAGS; + + /* Map API idle mode to USC register bits */ + + switch( info->idle_mode ){ + case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break; + case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break; + case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break; + case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break; + case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break; + case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break; + } + + info->usc_idle_mode = usc_idle_mode; + //usc_OutReg(info, TCSR, usc_idle_mode); + info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */ + info->tcsr_value += usc_idle_mode; + usc_OutReg(info, TCSR, info->tcsr_value); + + /* + * if SyncLink WAN adapter is running in external sync mode, the + * transmitter has been set to Monosync in order to try to mimic + * a true raw outbound bit stream. Monosync still sends an open/close + * sync char at the start/end of a frame. Try to match those sync + * patterns to the idle mode set here + */ + if ( info->params.mode == MGSL_MODE_RAW ) { + unsigned char syncpat = 0; + switch( info->idle_mode ) { + case HDLC_TXIDLE_FLAGS: + syncpat = 0x7e; + break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: + syncpat = 0x55; + break; + case HDLC_TXIDLE_ZEROS: + case HDLC_TXIDLE_SPACE: + syncpat = 0x00; + break; + case HDLC_TXIDLE_ONES: + case HDLC_TXIDLE_MARK: + syncpat = 0xff; + break; + case HDLC_TXIDLE_ALT_MARK_SPACE: + syncpat = 0xaa; + break; + } + + usc_SetTransmitSyncChars(info,syncpat,syncpat); + } + +} /* end of usc_set_txidle() */ + +/* usc_get_serial_signals() + * + * Query the adapter for the state of the V24 status (input) signals. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_get_serial_signals( struct mgsl_struct *info ) +{ + u16 status; + + /* clear all serial signals except DTR and RTS */ + info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; + + /* Read the Misc Interrupt status Register (MISR) to get */ + /* the V24 status signals. */ + + status = usc_InReg( info, MISR ); + + /* set serial signal bits to reflect MISR */ + + if ( status & MISCSTATUS_CTS ) + info->serial_signals |= SerialSignal_CTS; + + if ( status & MISCSTATUS_DCD ) + info->serial_signals |= SerialSignal_DCD; + + if ( status & MISCSTATUS_RI ) + info->serial_signals |= SerialSignal_RI; + + if ( status & MISCSTATUS_DSR ) + info->serial_signals |= SerialSignal_DSR; + +} /* end of usc_get_serial_signals() */ + +/* usc_set_serial_signals() + * + * Set the state of DTR and RTS based on contents of + * serial_signals member of device extension. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_serial_signals( struct mgsl_struct *info ) +{ + u16 Control; + unsigned char V24Out = info->serial_signals; + + /* get the current value of the Port Control Register (PCR) */ + + Control = usc_InReg( info, PCR ); + + if ( V24Out & SerialSignal_RTS ) + Control &= ~(BIT6); + else + Control |= BIT6; + + if ( V24Out & SerialSignal_DTR ) + Control &= ~(BIT4); + else + Control |= BIT4; + + usc_OutReg( info, PCR, Control ); + +} /* end of usc_set_serial_signals() */ + +/* usc_enable_async_clock() + * + * Enable the async clock at the specified frequency. + * + * Arguments: info pointer to device instance data + * data_rate data rate of clock in bps + * 0 disables the AUX clock. + * Return Value: None + */ +static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate ) +{ + if ( data_rate ) { + /* + * Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Disabled + * <13..12> 00 counter 0 Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> 100 TxCLK comes from BRG0 + * <2..0> 100 RxCLK comes from BRG0 + * + * 0000 1111 0110 0100 = 0x0f64 + */ + + usc_OutReg( info, CMCR, 0x0f64 ); + + + /* + * Write 16-bit Time Constant for BRG0 + * Time Constant = (ClkSpeed / data_rate) - 1 + * ClkSpeed = 921600 (ISA), 691200 (PCI) + */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) ); + else + usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) ); + + + /* + * Hardware Configuration Register (HCR) + * Clear Bit 1, BRG0 mode = Continuous + * Set Bit 0 to enable BRG0. + */ + + usc_OutReg( info, HCR, + (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + + usc_OutReg( info, IOCR, + (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); + } else { + /* data rate == 0 so turn off BRG0 */ + usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); + } + +} /* end of usc_enable_async_clock() */ + +/* + * Buffer Structures: + * + * Normal memory access uses virtual addresses that can make discontiguous + * physical memory pages appear to be contiguous in the virtual address + * space (the processors memory mapping handles the conversions). + * + * DMA transfers require physically contiguous memory. This is because + * the DMA system controller and DMA bus masters deal with memory using + * only physical addresses. + * + * This causes a problem under Windows NT when large DMA buffers are + * needed. Fragmentation of the nonpaged pool prevents allocations of + * physically contiguous buffers larger than the PAGE_SIZE. + * + * However the 16C32 supports Bus Master Scatter/Gather DMA which + * allows DMA transfers to physically discontiguous buffers. Information + * about each data transfer buffer is contained in a memory structure + * called a 'buffer entry'. A list of buffer entries is maintained + * to track and control the use of the data transfer buffers. + * + * To support this strategy we will allocate sufficient PAGE_SIZE + * contiguous memory buffers to allow for the total required buffer + * space. + * + * The 16C32 accesses the list of buffer entries using Bus Master + * DMA. Control information is read from the buffer entries by the + * 16C32 to control data transfers. status information is written to + * the buffer entries by the 16C32 to indicate the status of completed + * transfers. + * + * The CPU writes control information to the buffer entries to control + * the 16C32 and reads status information from the buffer entries to + * determine information about received and transmitted frames. + * + * Because the CPU and 16C32 (adapter) both need simultaneous access + * to the buffer entries, the buffer entry memory is allocated with + * HalAllocateCommonBuffer(). This restricts the size of the buffer + * entry list to PAGE_SIZE. + * + * The actual data buffers on the other hand will only be accessed + * by the CPU or the adapter but not by both simultaneously. This allows + * Scatter/Gather packet based DMA procedures for using physically + * discontiguous pages. + */ + +/* + * mgsl_reset_tx_dma_buffers() + * + * Set the count for all transmit buffers to 0 to indicate the + * buffer is available for use and set the current buffer to the + * first buffer. This effectively makes all buffers free and + * discards any data in buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ) +{ + unsigned int i; + + for ( i = 0; i < info->tx_buffer_count; i++ ) { + *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0; + } + + info->current_tx_buffer = 0; + info->start_tx_dma_buffer = 0; + info->tx_dma_buffers_used = 0; + + info->get_tx_holding_index = 0; + info->put_tx_holding_index = 0; + info->tx_holding_count = 0; + +} /* end of mgsl_reset_tx_dma_buffers() */ + +/* + * num_free_tx_dma_buffers() + * + * returns the number of free tx dma buffers available + * + * Arguments: info pointer to device instance data + * Return Value: number of free tx dma buffers + */ +static int num_free_tx_dma_buffers(struct mgsl_struct *info) +{ + return info->tx_buffer_count - info->tx_dma_buffers_used; +} + +/* + * mgsl_reset_rx_dma_buffers() + * + * Set the count for all receive buffers to DMABUFFERSIZE + * and set the current buffer to the first buffer. This effectively + * makes all buffers free and discards any data in buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ) +{ + unsigned int i; + + for ( i = 0; i < info->rx_buffer_count; i++ ) { + *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE; +// info->rx_buffer_list[i].count = DMABUFFERSIZE; +// info->rx_buffer_list[i].status = 0; + } + + info->current_rx_buffer = 0; + +} /* end of mgsl_reset_rx_dma_buffers() */ + +/* + * mgsl_free_rx_frame_buffers() + * + * Free the receive buffers used by a received SDLC + * frame such that the buffers can be reused. + * + * Arguments: + * + * info pointer to device instance data + * StartIndex index of 1st receive buffer of frame + * EndIndex index of last receive buffer of frame + * + * Return Value: None + */ +static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ) +{ + bool Done = false; + DMABUFFERENTRY *pBufEntry; + unsigned int Index; + + /* Starting with 1st buffer entry of the frame clear the status */ + /* field and set the count field to DMA Buffer Size. */ + + Index = StartIndex; + + while( !Done ) { + pBufEntry = &(info->rx_buffer_list[Index]); + + if ( Index == EndIndex ) { + /* This is the last buffer of the frame! */ + Done = true; + } + + /* reset current buffer for reuse */ +// pBufEntry->status = 0; +// pBufEntry->count = DMABUFFERSIZE; + *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE; + + /* advance to next buffer entry in linked list */ + Index++; + if ( Index == info->rx_buffer_count ) + Index = 0; + } + + /* set current buffer to next buffer after last buffer of frame */ + info->current_rx_buffer = Index; + +} /* end of free_rx_frame_buffers() */ + +/* mgsl_get_rx_frame() + * + * This function attempts to return a received SDLC frame from the + * receive DMA buffers. Only frames received without errors are returned. + * + * Arguments: info pointer to device extension + * Return Value: true if frame returned, otherwise false + */ +static bool mgsl_get_rx_frame(struct mgsl_struct *info) +{ + unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ + unsigned short status; + DMABUFFERENTRY *pBufEntry; + unsigned int framesize = 0; + bool ReturnCode = false; + unsigned long flags; + struct tty_struct *tty = info->port.tty; + bool return_frame = false; + + /* + * current_rx_buffer points to the 1st buffer of the next available + * receive frame. To find the last buffer of the frame look for + * a non-zero status field in the buffer entries. (The status + * field is set by the 16C32 after completing a receive frame. + */ + + StartIndex = EndIndex = info->current_rx_buffer; + + while( !info->rx_buffer_list[EndIndex].status ) { + /* + * If the count field of the buffer entry is non-zero then + * this buffer has not been used. (The 16C32 clears the count + * field when it starts using the buffer.) If an unused buffer + * is encountered then there are no frames available. + */ + + if ( info->rx_buffer_list[EndIndex].count ) + goto Cleanup; + + /* advance to next buffer entry in linked list */ + EndIndex++; + if ( EndIndex == info->rx_buffer_count ) + EndIndex = 0; + + /* if entire list searched then no frame available */ + if ( EndIndex == StartIndex ) { + /* If this occurs then something bad happened, + * all buffers have been 'used' but none mark + * the end of a frame. Reset buffers and receiver. + */ + + if ( info->rx_enabled ){ + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + goto Cleanup; + } + } + + + /* check status of receive frame */ + + status = info->rx_buffer_list[EndIndex].status; + + if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN + + RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) { + if ( status & RXSTATUS_SHORT_FRAME ) + info->icount.rxshort++; + else if ( status & RXSTATUS_ABORT ) + info->icount.rxabort++; + else if ( status & RXSTATUS_OVERRUN ) + info->icount.rxover++; + else { + info->icount.rxcrc++; + if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) + return_frame = true; + } + framesize = 0; +#if SYNCLINK_GENERIC_HDLC + { + info->netdev->stats.rx_errors++; + info->netdev->stats.rx_frame_errors++; + } +#endif + } else + return_frame = true; + + if ( return_frame ) { + /* receive frame has no errors, get frame size. + * The frame size is the starting value of the RCC (which was + * set to 0xffff) minus the ending value of the RCC (decremented + * once for each receive character) minus 2 for the 16-bit CRC. + */ + + framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc; + + /* adjust frame size for CRC if any */ + if ( info->params.crc_type == HDLC_CRC_16_CCITT ) + framesize -= 2; + else if ( info->params.crc_type == HDLC_CRC_32_CCITT ) + framesize -= 4; + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr, + min_t(int, framesize, DMABUFFERSIZE),0); + + if (framesize) { + if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) && + ((framesize+1) > info->max_frame_size) ) || + (framesize > info->max_frame_size) ) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous intermediate buffer */ + int copy_count = framesize; + int index = StartIndex; + unsigned char *ptmp = info->intermediate_rxbuffer; + + if ( !(status & RXSTATUS_CRC_ERROR)) + info->icount.rxok++; + + while(copy_count) { + int partial_count; + if ( copy_count > DMABUFFERSIZE ) + partial_count = DMABUFFERSIZE; + else + partial_count = copy_count; + + pBufEntry = &(info->rx_buffer_list[index]); + memcpy( ptmp, pBufEntry->virt_addr, partial_count ); + ptmp += partial_count; + copy_count -= partial_count; + + if ( ++index == info->rx_buffer_count ) + index = 0; + } + + if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) { + ++framesize; + *ptmp = (status & RXSTATUS_CRC_ERROR ? + RX_CRC_ERROR : + RX_OK); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n", + __FILE__,__LINE__,info->device_name, + *ptmp); + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_rx(info,info->intermediate_rxbuffer,framesize); + else +#endif + ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); + } + } + /* Free the buffers used by this frame. */ + mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex ); + + ReturnCode = true; + +Cleanup: + + if ( info->rx_enabled && info->rx_overflow ) { + /* The receiver needs to restarted because of + * a receive overflow (buffer or FIFO). If the + * receive buffers are now empty, then restart receiver. + */ + + if ( !info->rx_buffer_list[EndIndex].status && + info->rx_buffer_list[EndIndex].count ) { + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + return ReturnCode; + +} /* end of mgsl_get_rx_frame() */ + +/* mgsl_get_raw_rx_frame() + * + * This function attempts to return a received frame from the + * receive DMA buffers when running in external loop mode. In this mode, + * we will return at most one DMABUFFERSIZE frame to the application. + * The USC receiver is triggering off of DCD going active to start a new + * frame, and DCD going inactive to terminate the frame (similar to + * processing a closing flag character). + * + * In this routine, we will return DMABUFFERSIZE "chunks" at a time. + * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero + * status field and the RCC field will indicate the length of the + * entire received frame. We take this RCC field and get the modulus + * of RCC and DMABUFFERSIZE to determine if number of bytes in the + * last Rx DMA buffer and return that last portion of the frame. + * + * Arguments: info pointer to device extension + * Return Value: true if frame returned, otherwise false + */ +static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info) +{ + unsigned int CurrentIndex, NextIndex; + unsigned short status; + DMABUFFERENTRY *pBufEntry; + unsigned int framesize = 0; + bool ReturnCode = false; + unsigned long flags; + struct tty_struct *tty = info->port.tty; + + /* + * current_rx_buffer points to the 1st buffer of the next available + * receive frame. The status field is set by the 16C32 after + * completing a receive frame. If the status field of this buffer + * is zero, either the USC is still filling this buffer or this + * is one of a series of buffers making up a received frame. + * + * If the count field of this buffer is zero, the USC is either + * using this buffer or has used this buffer. Look at the count + * field of the next buffer. If that next buffer's count is + * non-zero, the USC is still actively using the current buffer. + * Otherwise, if the next buffer's count field is zero, the + * current buffer is complete and the USC is using the next + * buffer. + */ + CurrentIndex = NextIndex = info->current_rx_buffer; + ++NextIndex; + if ( NextIndex == info->rx_buffer_count ) + NextIndex = 0; + + if ( info->rx_buffer_list[CurrentIndex].status != 0 || + (info->rx_buffer_list[CurrentIndex].count == 0 && + info->rx_buffer_list[NextIndex].count == 0)) { + /* + * Either the status field of this dma buffer is non-zero + * (indicating the last buffer of a receive frame) or the next + * buffer is marked as in use -- implying this buffer is complete + * and an intermediate buffer for this received frame. + */ + + status = info->rx_buffer_list[CurrentIndex].status; + + if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN + + RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) { + if ( status & RXSTATUS_SHORT_FRAME ) + info->icount.rxshort++; + else if ( status & RXSTATUS_ABORT ) + info->icount.rxabort++; + else if ( status & RXSTATUS_OVERRUN ) + info->icount.rxover++; + else + info->icount.rxcrc++; + framesize = 0; + } else { + /* + * A receive frame is available, get frame size and status. + * + * The frame size is the starting value of the RCC (which was + * set to 0xffff) minus the ending value of the RCC (decremented + * once for each receive character) minus 2 or 4 for the 16-bit + * or 32-bit CRC. + * + * If the status field is zero, this is an intermediate buffer. + * It's size is 4K. + * + * If the DMA Buffer Entry's Status field is non-zero, the + * receive operation completed normally (ie: DCD dropped). The + * RCC field is valid and holds the received frame size. + * It is possible that the RCC field will be zero on a DMA buffer + * entry with a non-zero status. This can occur if the total + * frame size (number of bytes between the time DCD goes active + * to the time DCD goes inactive) exceeds 65535 bytes. In this + * case the 16C32 has underrun on the RCC count and appears to + * stop updating this counter to let us know the actual received + * frame size. If this happens (non-zero status and zero RCC), + * simply return the entire RxDMA Buffer + */ + if ( status ) { + /* + * In the event that the final RxDMA Buffer is + * terminated with a non-zero status and the RCC + * field is zero, we interpret this as the RCC + * having underflowed (received frame > 65535 bytes). + * + * Signal the event to the user by passing back + * a status of RxStatus_CrcError returning the full + * buffer and let the app figure out what data is + * actually valid + */ + if ( info->rx_buffer_list[CurrentIndex].rcc ) + framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc; + else + framesize = DMABUFFERSIZE; + } + else + framesize = DMABUFFERSIZE; + } + + if ( framesize > DMABUFFERSIZE ) { + /* + * if running in raw sync mode, ISR handler for + * End Of Buffer events terminates all buffers at 4K. + * If this frame size is said to be >4K, get the + * actual number of bytes of the frame in this buffer. + */ + framesize = framesize % DMABUFFERSIZE; + } + + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr, + min_t(int, framesize, DMABUFFERSIZE),0); + + if (framesize) { + /* copy dma buffer(s) to contiguous intermediate buffer */ + /* NOTE: we never copy more than DMABUFFERSIZE bytes */ + + pBufEntry = &(info->rx_buffer_list[CurrentIndex]); + memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize); + info->icount.rxok++; + + ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); + } + + /* Free the buffers used by this frame. */ + mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex ); + + ReturnCode = true; + } + + + if ( info->rx_enabled && info->rx_overflow ) { + /* The receiver needs to restarted because of + * a receive overflow (buffer or FIFO). If the + * receive buffers are now empty, then restart receiver. + */ + + if ( !info->rx_buffer_list[CurrentIndex].status && + info->rx_buffer_list[CurrentIndex].count ) { + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + return ReturnCode; + +} /* end of mgsl_get_raw_rx_frame() */ + +/* mgsl_load_tx_dma_buffer() + * + * Load the transmit DMA buffer with the specified data. + * + * Arguments: + * + * info pointer to device extension + * Buffer pointer to buffer containing frame to load + * BufferSize size in bytes of frame in Buffer + * + * Return Value: None + */ +static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info, + const char *Buffer, unsigned int BufferSize) +{ + unsigned short Copycount; + unsigned int i = 0; + DMABUFFERENTRY *pBufEntry; + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1); + + if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { + /* set CMR:13 to start transmit when + * next GoAhead (abort) is received + */ + info->cmr_value |= BIT13; + } + + /* begin loading the frame in the next available tx dma + * buffer, remember it's starting location for setting + * up tx dma operation + */ + i = info->current_tx_buffer; + info->start_tx_dma_buffer = i; + + /* Setup the status and RCC (Frame Size) fields of the 1st */ + /* buffer entry in the transmit DMA buffer list. */ + + info->tx_buffer_list[i].status = info->cmr_value & 0xf000; + info->tx_buffer_list[i].rcc = BufferSize; + info->tx_buffer_list[i].count = BufferSize; + + /* Copy frame data from 1st source buffer to the DMA buffers. */ + /* The frame data may span multiple DMA buffers. */ + + while( BufferSize ){ + /* Get a pointer to next DMA buffer entry. */ + pBufEntry = &info->tx_buffer_list[i++]; + + if ( i == info->tx_buffer_count ) + i=0; + + /* Calculate the number of bytes that can be copied from */ + /* the source buffer to this DMA buffer. */ + if ( BufferSize > DMABUFFERSIZE ) + Copycount = DMABUFFERSIZE; + else + Copycount = BufferSize; + + /* Actually copy data from source buffer to DMA buffer. */ + /* Also set the data count for this individual DMA buffer. */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount); + else + memcpy(pBufEntry->virt_addr, Buffer, Copycount); + + pBufEntry->count = Copycount; + + /* Advance source pointer and reduce remaining data count. */ + Buffer += Copycount; + BufferSize -= Copycount; + + ++info->tx_dma_buffers_used; + } + + /* remember next available tx dma buffer */ + info->current_tx_buffer = i; + +} /* end of mgsl_load_tx_dma_buffer() */ + +/* + * mgsl_register_test() + * + * Performs a register test of the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: true if test passed, otherwise false + */ +static bool mgsl_register_test( struct mgsl_struct *info ) +{ + static unsigned short BitPatterns[] = + { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f }; + static unsigned int Patterncount = ARRAY_SIZE(BitPatterns); + unsigned int i; + bool rc = true; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + + /* Verify the reset state of some registers. */ + + if ( (usc_InReg( info, SICR ) != 0) || + (usc_InReg( info, IVR ) != 0) || + (usc_InDmaReg( info, DIVR ) != 0) ){ + rc = false; + } + + if ( rc ){ + /* Write bit patterns to various registers but do it out of */ + /* sync, then read back and verify values. */ + + for ( i = 0 ; i < Patterncount ; i++ ) { + usc_OutReg( info, TC0R, BitPatterns[i] ); + usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] ); + usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] ); + usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] ); + usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] ); + usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] ); + + if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) || + (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) || + (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) || + (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) || + (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) || + (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){ + rc = false; + break; + } + } + } + + usc_reset(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return rc; + +} /* end of mgsl_register_test() */ + +/* mgsl_irq_test() Perform interrupt test of the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: true if test passed, otherwise false + */ +static bool mgsl_irq_test( struct mgsl_struct *info ) +{ + unsigned long EndTime; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + + /* + * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition. + * The ISR sets irq_occurred to true. + */ + + info->irq_occurred = false; + + /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */ + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) ); + + usc_EnableMasterIrqBit(info); + usc_EnableInterrupts(info, IO_PIN); + usc_ClearIrqPendingBits(info, IO_PIN); + + usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED); + usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + EndTime=100; + while( EndTime-- && !info->irq_occurred ) { + msleep_interruptible(10); + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return info->irq_occurred; + +} /* end of mgsl_irq_test() */ + +/* mgsl_dma_test() + * + * Perform a DMA test of the 16C32. A small frame is + * transmitted via DMA from a transmit buffer to a receive buffer + * using single buffer DMA mode. + * + * Arguments: info pointer to device instance data + * Return Value: true if test passed, otherwise false + */ +static bool mgsl_dma_test( struct mgsl_struct *info ) +{ + unsigned short FifoLevel; + unsigned long phys_addr; + unsigned int FrameSize; + unsigned int i; + char *TmpPtr; + bool rc = true; + unsigned short status=0; + unsigned long EndTime; + unsigned long flags; + MGSL_PARAMS tmp_params; + + /* save current port options */ + memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS)); + /* load default port options */ + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + +#define TESTFRAMESIZE 40 + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* setup 16C32 for SDLC DMA transfer mode */ + + usc_reset(info); + usc_set_sdlc_mode(info); + usc_enable_loopback(info,1); + + /* Reprogram the RDMR so that the 16C32 does NOT clear the count + * field of the buffer entry after fetching buffer address. This + * way we can detect a DMA failure for a DMA read (which should be + * non-destructive to system memory) before we try and write to + * memory (where a failure could corrupt system memory). + */ + + /* Receive DMA mode Register (RDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 RSBinA/L = store Rx status Block in List entry + * <12> 0 1 = Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on RxBound + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (write as 0s) + * + * 1110 0010 0000 0000 = 0xe200 + */ + + usc_OutDmaReg( info, RDMR, 0xe200 ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */ + + FrameSize = TESTFRAMESIZE; + + /* setup 1st transmit buffer entry: */ + /* with frame size and transmit control word */ + + info->tx_buffer_list[0].count = FrameSize; + info->tx_buffer_list[0].rcc = FrameSize; + info->tx_buffer_list[0].status = 0x4000; + + /* build a transmit frame in 1st transmit DMA buffer */ + + TmpPtr = info->tx_buffer_list[0].virt_addr; + for (i = 0; i < FrameSize; i++ ) + *TmpPtr++ = i; + + /* setup 1st receive buffer entry: */ + /* clear status, set max receive buffer size */ + + info->rx_buffer_list[0].status = 0; + info->rx_buffer_list[0].count = FrameSize + 4; + + /* zero out the 1st receive buffer */ + + memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 ); + + /* Set count field of next buffer entries to prevent */ + /* 16C32 from using buffers after the 1st one. */ + + info->tx_buffer_list[1].count = 0; + info->rx_buffer_list[1].count = 0; + + + /***************************/ + /* Program 16C32 receiver. */ + /***************************/ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* setup DMA transfers */ + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + /* program 16C32 receiver with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr ); + usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) ); + + /* Clear the Rx DMA status bits (read RDMR) and start channel */ + usc_InDmaReg( info, RDMR ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + + /* Enable Receiver (RMR <1..0> = 10) */ + usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /*************************************************************/ + /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */ + /*************************************************************/ + + /* Wait 100ms for interrupt. */ + EndTime = jiffies + msecs_to_jiffies(100); + + for(;;) { + if (time_after(jiffies, EndTime)) { + rc = false; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InDmaReg( info, RDMR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + if ( !(status & BIT4) && (status & BIT5) ) { + /* INITG (BIT 4) is inactive (no entry read in progress) AND */ + /* BUSY (BIT 5) is active (channel still active). */ + /* This means the buffer entry read has completed. */ + break; + } + } + + + /******************************/ + /* Program 16C32 transmitter. */ + /******************************/ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + + usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* Program the address of the 1st DMA Buffer Entry in linked list */ + + phys_addr = info->tx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr ); + usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) ); + + /* unlatch Tx status bits, and start transmit channel. */ + + usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) ); + usc_DmaCmd( info, DmaCmd_InitTxChannel ); + + /* wait for DMA controller to fill transmit FIFO */ + + usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /**********************************/ + /* WAIT FOR TRANSMIT FIFO TO FILL */ + /**********************************/ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + for(;;) { + if (time_after(jiffies, EndTime)) { + rc = false; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + FifoLevel = usc_InReg(info, TICR) >> 8; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + if ( FifoLevel < 16 ) + break; + else + if ( FrameSize < 32 ) { + /* This frame is smaller than the entire transmit FIFO */ + /* so wait for the entire frame to be loaded. */ + if ( FifoLevel <= (32 - FrameSize) ) + break; + } + } + + + if ( rc ) + { + /* Enable 16C32 transmitter. */ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */ + usc_TCmd( info, TCmd_SendFrame ); + usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /******************************/ + /* WAIT FOR TRANSMIT COMPLETE */ + /******************************/ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + /* While timer not expired wait for transmit complete */ + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InReg( info, TCSR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) { + if (time_after(jiffies, EndTime)) { + rc = false; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InReg( info, TCSR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + + if ( rc ){ + /* CHECK FOR TRANSMIT ERRORS */ + if ( status & (BIT5 + BIT1) ) + rc = false; + } + + if ( rc ) { + /* WAIT FOR RECEIVE COMPLETE */ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + /* Wait for 16C32 to write receive status to buffer entry. */ + status=info->rx_buffer_list[0].status; + while ( status == 0 ) { + if (time_after(jiffies, EndTime)) { + rc = false; + break; + } + status=info->rx_buffer_list[0].status; + } + } + + + if ( rc ) { + /* CHECK FOR RECEIVE ERRORS */ + status = info->rx_buffer_list[0].status; + + if ( status & (BIT8 + BIT3 + BIT1) ) { + /* receive error has occurred */ + rc = false; + } else { + if ( memcmp( info->tx_buffer_list[0].virt_addr , + info->rx_buffer_list[0].virt_addr, FrameSize ) ){ + rc = false; + } + } + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* restore current port options */ + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + + return rc; + +} /* end of mgsl_dma_test() */ + +/* mgsl_adapter_test() + * + * Perform the register, IRQ, and DMA tests for the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise -ENODEV + */ +static int mgsl_adapter_test( struct mgsl_struct *info ) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):Testing device %s\n", + __FILE__,__LINE__,info->device_name ); + + if ( !mgsl_register_test( info ) ) { + info->init_error = DiagStatus_AddressFailure; + printk( "%s(%d):Register test failure for device %s Addr=%04X\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) ); + return -ENODEV; + } + + if ( !mgsl_irq_test( info ) ) { + info->init_error = DiagStatus_IrqFailure; + printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); + return -ENODEV; + } + + if ( !mgsl_dma_test( info ) ) { + info->init_error = DiagStatus_DmaFailure; + printk( "%s(%d):DMA test failure for device %s DMA=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) ); + return -ENODEV; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):device %s passed diagnostics\n", + __FILE__,__LINE__,info->device_name ); + + return 0; + +} /* end of mgsl_adapter_test() */ + +/* mgsl_memory_test() + * + * Test the shared memory on a PCI adapter. + * + * Arguments: info pointer to device instance data + * Return Value: true if test passed, otherwise false + */ +static bool mgsl_memory_test( struct mgsl_struct *info ) +{ + static unsigned long BitPatterns[] = + { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; + unsigned long Patterncount = ARRAY_SIZE(BitPatterns); + unsigned long i; + unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long); + unsigned long * TestAddr; + + if ( info->bus_type != MGSL_BUS_TYPE_PCI ) + return true; + + TestAddr = (unsigned long *)info->memory_base; + + /* Test data lines with test pattern at one location. */ + + for ( i = 0 ; i < Patterncount ; i++ ) { + *TestAddr = BitPatterns[i]; + if ( *TestAddr != BitPatterns[i] ) + return false; + } + + /* Test address lines with incrementing pattern over */ + /* entire address range. */ + + for ( i = 0 ; i < TestLimit ; i++ ) { + *TestAddr = i * 4; + TestAddr++; + } + + TestAddr = (unsigned long *)info->memory_base; + + for ( i = 0 ; i < TestLimit ; i++ ) { + if ( *TestAddr != i * 4 ) + return false; + TestAddr++; + } + + memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE ); + + return true; + +} /* End Of mgsl_memory_test() */ + + +/* mgsl_load_pci_memory() + * + * Load a large block of data into the PCI shared memory. + * Use this instead of memcpy() or memmove() to move data + * into the PCI shared memory. + * + * Notes: + * + * This function prevents the PCI9050 interface chip from hogging + * the adapter local bus, which can starve the 16C32 by preventing + * 16C32 bus master cycles. + * + * The PCI9050 documentation says that the 9050 will always release + * control of the local bus after completing the current read + * or write operation. + * + * It appears that as long as the PCI9050 write FIFO is full, the + * PCI9050 treats all of the writes as a single burst transaction + * and will not release the bus. This causes DMA latency problems + * at high speeds when copying large data blocks to the shared + * memory. + * + * This function in effect, breaks the a large shared memory write + * into multiple transations by interleaving a shared memory read + * which will flush the write FIFO and 'complete' the write + * transation. This allows any pending DMA request to gain control + * of the local bus in a timely fasion. + * + * Arguments: + * + * TargetPtr pointer to target address in PCI shared memory + * SourcePtr pointer to source buffer for data + * count count in bytes of data to copy + * + * Return Value: None + */ +static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr, + unsigned short count ) +{ + /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */ +#define PCI_LOAD_INTERVAL 64 + + unsigned short Intervalcount = count / PCI_LOAD_INTERVAL; + unsigned short Index; + unsigned long Dummy; + + for ( Index = 0 ; Index < Intervalcount ; Index++ ) + { + memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL); + Dummy = *((volatile unsigned long *)TargetPtr); + TargetPtr += PCI_LOAD_INTERVAL; + SourcePtr += PCI_LOAD_INTERVAL; + } + + memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL ); + +} /* End Of mgsl_load_pci_memory() */ + +static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit) +{ + int i; + int linecount; + if (xmit) + printk("%s tx data:\n",info->device_name); + else + printk("%s rx data:\n",info->device_name); + + while(count) { + if (count > 16) + linecount = 16; + else + linecount = count; + + for(i=0;i=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + + data += linecount; + count -= linecount; + } +} /* end of mgsl_trace_block() */ + +/* mgsl_tx_timeout() + * + * called when HDLC frame times out + * update stats and do tx completion processing + * + * Arguments: context pointer to device instance data + * Return Value: None + */ +static void mgsl_tx_timeout(unsigned long context) +{ + struct mgsl_struct *info = (struct mgsl_struct*)context; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_tx_timeout(%s)\n", + __FILE__,__LINE__,info->device_name); + if(info->tx_active && + (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW) ) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->irq_spinlock,flags); + info->tx_active = false; + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_cancel_transmit( info ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + mgsl_bh_transmit(info); + +} /* end of mgsl_tx_timeout() */ + +/* signal that there are no more frames to send, so that + * line is 'released' by echoing RxD to TxD when current + * transmission is complete (or immediately if no tx in progress). + */ +static int mgsl_loopmode_send_done( struct mgsl_struct * info ) +{ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { + if (info->tx_active) + info->loopmode_send_done_requested = true; + else + usc_loopmode_send_done(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return 0; +} + +/* release the line by echoing RxD to TxD + * upon completion of a transmit frame + */ +static void usc_loopmode_send_done( struct mgsl_struct * info ) +{ + info->loopmode_send_done_requested = false; + /* clear CMR:13 to 0 to start echoing RxData to TxData */ + info->cmr_value &= ~BIT13; + usc_OutReg(info, CMR, info->cmr_value); +} + +/* abort a transmit in progress while in HDLC LoopMode + */ +static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ) +{ + /* reset tx dma channel and purge TxFifo */ + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_loopmode_send_done( info ); +} + +/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled + * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort) + * we must clear CMR:13 to begin repeating TxData to RxData + */ +static void usc_loopmode_insert_request( struct mgsl_struct * info ) +{ + info->loopmode_insert_requested = true; + + /* enable RxAbort irq. On next RxAbort, clear CMR:13 to + * begin repeating TxData on RxData (complete insertion) + */ + usc_OutReg( info, RICR, + (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) ); + + /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */ + info->cmr_value |= BIT13; + usc_OutReg(info, CMR, info->cmr_value); +} + +/* return 1 if station is inserted into the loop, otherwise 0 + */ +static int usc_loopmode_active( struct mgsl_struct * info) +{ + return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ; +} + +#if SYNCLINK_GENERIC_HDLC + +/** + * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * set encoding and frame check sequence (FCS) options + * + * dev pointer to network device structure + * encoding serial encoding setting + * parity FCS setting + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + mgsl_program_hw(info); + + return 0; +} + +/** + * called by generic HDLC layer to send frame + * + * skb socket buffer containing HDLC frame + * dev pointer to network device structure + */ +static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* copy data to device buffers */ + info->xmit_cnt = skb->len; + mgsl_load_tx_dma_buffer(info, skb->data, skb->len); + + /* update network statistics */ + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + /* save start time for transmit timeout detection */ + dev->trans_start = jiffies; + + /* start hardware transmitter if necessary */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_active) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return NETDEV_TX_OK; +} + +/** + * called by network layer when interface enabled + * claim resources and initialize hardware + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + int rc; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); + + /* generic HDLC layer open processing */ + if ((rc = hdlc_open(dev))) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->port.count != 0 || info->netcount != 0) { + printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert DTR and RTS, apply hardware settings */ + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + mgsl_program_hw(info); + + /* enable network layer transmit */ + dev->trans_start = jiffies; + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->irq_spinlock, flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock, flags); + if (info->serial_signals & SerialSignal_DCD) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + +/** + * called by network layer when interface is disabled + * shutdown hardware and release resources + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + return 0; +} + +/** + * called by network layer to process IOCTL call to network device + * + * dev pointer to network device structure + * ifr pointer to network interface request structure + * cmd IOCTL command code + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + struct mgsl_struct *info = dev_to_port(dev); + unsigned int flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + mgsl_program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * called by network layer when transmit timeout is detected + * + * dev pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_tx_timeout(%s)\n",dev->name); + + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_stop_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + netif_wake_queue(dev); +} + +/** + * called by device driver when transmit completes + * reenable network layer transmit if stopped + * + * info pointer to device instance information + */ +static void hdlcdev_tx_done(struct mgsl_struct *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * called by device driver when frame received + * pass frame to network layer + * + * info pointer to device instance information + * buf pointer to buffer contianing frame data + * size count of data bytes in buf + */ +static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_rx(%s)\n", dev->name); + + if (skb == NULL) { + printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", + dev->name); + dev->stats.rx_dropped++; + return; + } + + memcpy(skb_put(skb, size), buf, size); + + skb->protocol = hdlc_type_trans(skb, dev); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += size; + + netif_rx(skb); +} + +static const struct net_device_ops hdlcdev_ops = { + .ndo_open = hdlcdev_open, + .ndo_stop = hdlcdev_close, + .ndo_change_mtu = hdlc_change_mtu, + .ndo_start_xmit = hdlc_start_xmit, + .ndo_do_ioctl = hdlcdev_ioctl, + .ndo_tx_timeout = hdlcdev_tx_timeout, +}; + +/** + * called by device driver when adding device instance + * do generic HDLC initialization + * + * info pointer to device instance information + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_init(struct mgsl_struct *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + if (!(dev = alloc_hdlcdev(info))) { + printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->base_addr = info->io_base; + dev->irq = info->irq_level; + dev->dma = info->dma_level; + + /* network layer callbacks and settings */ + dev->netdev_ops = &hdlcdev_ops; + dev->watchdog_timeo = 10 * HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + if ((rc = register_hdlc_device(dev))) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * called by device driver when removing device instance + * do generic HDLC cleanup + * + * info pointer to device instance information + */ +static void hdlcdev_exit(struct mgsl_struct *info) +{ + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* CONFIG_HDLC */ + + +static int __devinit synclink_init_one (struct pci_dev *dev, + const struct pci_device_id *ent) +{ + struct mgsl_struct *info; + + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + + if (!(info = mgsl_allocate_device())) { + printk("can't allocate device instance data.\n"); + return -EIO; + } + + /* Copy user configuration info to device instance data */ + + info->io_base = pci_resource_start(dev, 2); + info->irq_level = dev->irq; + info->phys_memory_base = pci_resource_start(dev, 3); + + /* Because veremap only works on page boundaries we must map + * a larger area than is actually implemented for the LCR + * memory range. We map a full page starting at the page boundary. + */ + info->phys_lcr_base = pci_resource_start(dev, 0); + info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); + info->phys_lcr_base &= ~(PAGE_SIZE-1); + + info->bus_type = MGSL_BUS_TYPE_PCI; + info->io_addr_size = 8; + info->irq_flags = IRQF_SHARED; + + if (dev->device == 0x0210) { + /* Version 1 PCI9030 based universal PCI adapter */ + info->misc_ctrl_value = 0x007c4080; + info->hw_version = 1; + } else { + /* Version 0 PCI9050 based 5V PCI adapter + * A PCI9050 bug prevents reading LCR registers if + * LCR base address bit 7 is set. Maintain shadow + * value so we can write to LCR misc control reg. + */ + info->misc_ctrl_value = 0x087e4546; + info->hw_version = 0; + } + + mgsl_add_device(info); + + return 0; +} + +static void __devexit synclink_remove_one (struct pci_dev *dev) +{ +} + diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c new file mode 100644 index 000000000000..a35dd549a008 --- /dev/null +++ b/drivers/tty/synclink_gt.c @@ -0,0 +1,5161 @@ +/* + * Device driver for Microgate SyncLink GT serial adapters. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * This code is released under the GNU General Public License (GPL) + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * DEBUG OUTPUT DEFINITIONS + * + * uncomment lines below to enable specific types of debug output + * + * DBGINFO information - most verbose output + * DBGERR serious errors + * DBGBH bottom half service routine debugging + * DBGISR interrupt service routine debugging + * DBGDATA output receive and transmit data + * DBGTBUF output transmit DMA buffers and registers + * DBGRBUF output receive DMA buffers and registers + */ + +#define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt +#define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt +#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt +#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt +#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) +/*#define DBGTBUF(info) dump_tbufs(info)*/ +/*#define DBGRBUF(info) dump_rbufs(info)*/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE)) +#define SYNCLINK_GENERIC_HDLC 1 +#else +#define SYNCLINK_GENERIC_HDLC 0 +#endif + +/* + * module identification + */ +static char *driver_name = "SyncLink GT"; +static char *tty_driver_name = "synclink_gt"; +static char *tty_dev_prefix = "ttySLG"; +MODULE_LICENSE("GPL"); +#define MGSL_MAGIC 0x5401 +#define MAX_DEVICES 32 + +static struct pci_device_id pci_table[] = { + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, pci_table); + +static int init_one(struct pci_dev *dev,const struct pci_device_id *ent); +static void remove_one(struct pci_dev *dev); +static struct pci_driver pci_driver = { + .name = "synclink_gt", + .id_table = pci_table, + .probe = init_one, + .remove = __devexit_p(remove_one), +}; + +static bool pci_registered; + +/* + * module configuration and status + */ +static struct slgt_info *slgt_device_list; +static int slgt_device_count; + +static int ttymajor; +static int debug_level; +static int maxframe[MAX_DEVICES]; + +module_param(ttymajor, int, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); + +MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); +MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); +MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); + +/* + * tty support and callbacks + */ +static struct tty_driver *serial_driver; + +static int open(struct tty_struct *tty, struct file * filp); +static void close(struct tty_struct *tty, struct file * filp); +static void hangup(struct tty_struct *tty); +static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); + +static int write(struct tty_struct *tty, const unsigned char *buf, int count); +static int put_char(struct tty_struct *tty, unsigned char ch); +static void send_xchar(struct tty_struct *tty, char ch); +static void wait_until_sent(struct tty_struct *tty, int timeout); +static int write_room(struct tty_struct *tty); +static void flush_chars(struct tty_struct *tty); +static void flush_buffer(struct tty_struct *tty); +static void tx_hold(struct tty_struct *tty); +static void tx_release(struct tty_struct *tty); + +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); +static int chars_in_buffer(struct tty_struct *tty); +static void throttle(struct tty_struct * tty); +static void unthrottle(struct tty_struct * tty); +static int set_break(struct tty_struct *tty, int break_state); + +/* + * generic HDLC support and callbacks + */ +#if SYNCLINK_GENERIC_HDLC +#define dev_to_port(D) (dev_to_hdlc(D)->priv) +static void hdlcdev_tx_done(struct slgt_info *info); +static void hdlcdev_rx(struct slgt_info *info, char *buf, int size); +static int hdlcdev_init(struct slgt_info *info); +static void hdlcdev_exit(struct slgt_info *info); +#endif + + +/* + * device specific structures, macros and functions + */ + +#define SLGT_MAX_PORTS 4 +#define SLGT_REG_SIZE 256 + +/* + * conditional wait facility + */ +struct cond_wait { + struct cond_wait *next; + wait_queue_head_t q; + wait_queue_t wait; + unsigned int data; +}; +static void init_cond_wait(struct cond_wait *w, unsigned int data); +static void add_cond_wait(struct cond_wait **head, struct cond_wait *w); +static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w); +static void flush_cond_wait(struct cond_wait **head); + +/* + * DMA buffer descriptor and access macros + */ +struct slgt_desc +{ + __le16 count; + __le16 status; + __le32 pbuf; /* physical address of data buffer */ + __le32 next; /* physical address of next descriptor */ + + /* driver book keeping */ + char *buf; /* virtual address of data buffer */ + unsigned int pdesc; /* physical address of this descriptor */ + dma_addr_t buf_dma_addr; + unsigned short buf_count; +}; + +#define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b)) +#define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) +#define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) +#define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) +#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) +#define desc_count(a) (le16_to_cpu((a).count)) +#define desc_status(a) (le16_to_cpu((a).status)) +#define desc_complete(a) (le16_to_cpu((a).status) & BIT15) +#define desc_eof(a) (le16_to_cpu((a).status) & BIT2) +#define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1) +#define desc_abort(a) (le16_to_cpu((a).status) & BIT0) +#define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3) + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* + * device instance data structure + */ +struct slgt_info { + void *if_ptr; /* General purpose pointer (used by SPPP) */ + struct tty_port port; + + struct slgt_info *next_device; /* device list link */ + + int magic; + + char device_name[25]; + struct pci_dev *pdev; + + int port_count; /* count of ports on adapter */ + int adapter_num; /* adapter instance number */ + int port_num; /* port instance number */ + + /* array of pointers to port contexts on this adapter */ + struct slgt_info *port_array[SLGT_MAX_PORTS]; + + int line; /* tty line instance number */ + + struct mgsl_icount icount; + + int timeout; + int x_char; /* xon/xoff character */ + unsigned int read_status_mask; + unsigned int ignore_status_mask; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; + struct timer_list rx_timer; + + unsigned int gpio_present; + struct cond_wait *gpio_wait_q; + + spinlock_t lock; /* spinlock for synchronizing with ISR */ + + struct work_struct task; + u32 pending_bh; + bool bh_requested; + bool bh_running; + + int isr_overflow; + bool irq_requested; /* true if IRQ requested */ + bool irq_occurred; /* for diagnostics use */ + + /* device configuration */ + + unsigned int bus_type; + unsigned int irq_level; + unsigned long irq_flags; + + unsigned char __iomem * reg_addr; /* memory mapped registers address */ + u32 phys_reg_addr; + bool reg_addr_requested; + + MGSL_PARAMS params; /* communications parameters */ + u32 idle_mode; + u32 max_frame_size; /* as set by device config */ + + unsigned int rbuf_fill_level; + unsigned int rx_pio; + unsigned int if_mode; + unsigned int base_clock; + unsigned int xsync; + unsigned int xctrl; + + /* device status */ + + bool rx_enabled; + bool rx_restart; + + bool tx_enabled; + bool tx_active; + + unsigned char signals; /* serial signal states */ + int init_error; /* initialization error */ + + unsigned char *tx_buf; + int tx_count; + + char flag_buf[MAX_ASYNC_BUFFER_SIZE]; + char char_buf[MAX_ASYNC_BUFFER_SIZE]; + bool drop_rts_on_tx_done; + struct _input_signal_events input_signal_events; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *bufs; /* virtual address of DMA buffer lists */ + dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */ + + unsigned int rbuf_count; + struct slgt_desc *rbufs; + unsigned int rbuf_current; + unsigned int rbuf_index; + unsigned int rbuf_fill_index; + unsigned short rbuf_fill_count; + + unsigned int tbuf_count; + struct slgt_desc *tbufs; + unsigned int tbuf_current; + unsigned int tbuf_start; + + unsigned char *tmp_rbuf; + unsigned int tmp_rbuf_count; + + /* SPPP/Cisco HDLC device parts */ + + int netcount; + spinlock_t netlock; +#if SYNCLINK_GENERIC_HDLC + struct net_device *netdev; +#endif + +}; + +static MGSL_PARAMS default_params = { + .mode = MGSL_MODE_HDLC, + .loopback = 0, + .flags = HDLC_FLAG_UNDERRUN_ABORT15, + .encoding = HDLC_ENCODING_NRZI_SPACE, + .clock_speed = 0, + .addr_filter = 0xff, + .crc_type = HDLC_CRC_16_CCITT, + .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS, + .preamble = HDLC_PREAMBLE_PATTERN_NONE, + .data_rate = 9600, + .data_bits = 8, + .stop_bits = 1, + .parity = ASYNC_PARITY_NONE +}; + + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 +#define IO_PIN_SHUTDOWN_LIMIT 100 + +#define DMABUFSIZE 256 +#define DESC_LIST_SIZE 4096 + +#define MASK_PARITY BIT1 +#define MASK_FRAMING BIT0 +#define MASK_BREAK BIT14 +#define MASK_OVERRUN BIT4 + +#define GSR 0x00 /* global status */ +#define JCR 0x04 /* JTAG control */ +#define IODR 0x08 /* GPIO direction */ +#define IOER 0x0c /* GPIO interrupt enable */ +#define IOVR 0x10 /* GPIO value */ +#define IOSR 0x14 /* GPIO interrupt status */ +#define TDR 0x80 /* tx data */ +#define RDR 0x80 /* rx data */ +#define TCR 0x82 /* tx control */ +#define TIR 0x84 /* tx idle */ +#define TPR 0x85 /* tx preamble */ +#define RCR 0x86 /* rx control */ +#define VCR 0x88 /* V.24 control */ +#define CCR 0x89 /* clock control */ +#define BDR 0x8a /* baud divisor */ +#define SCR 0x8c /* serial control */ +#define SSR 0x8e /* serial status */ +#define RDCSR 0x90 /* rx DMA control/status */ +#define TDCSR 0x94 /* tx DMA control/status */ +#define RDDAR 0x98 /* rx DMA descriptor address */ +#define TDDAR 0x9c /* tx DMA descriptor address */ +#define XSR 0x40 /* extended sync pattern */ +#define XCR 0x44 /* extended control */ + +#define RXIDLE BIT14 +#define RXBREAK BIT14 +#define IRQ_TXDATA BIT13 +#define IRQ_TXIDLE BIT12 +#define IRQ_TXUNDER BIT11 /* HDLC */ +#define IRQ_RXDATA BIT10 +#define IRQ_RXIDLE BIT9 /* HDLC */ +#define IRQ_RXBREAK BIT9 /* async */ +#define IRQ_RXOVER BIT8 +#define IRQ_DSR BIT7 +#define IRQ_CTS BIT6 +#define IRQ_DCD BIT5 +#define IRQ_RI BIT4 +#define IRQ_ALL 0x3ff0 +#define IRQ_MASTER BIT0 + +#define slgt_irq_on(info, mask) \ + wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask))) +#define slgt_irq_off(info, mask) \ + wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask))) + +static __u8 rd_reg8(struct slgt_info *info, unsigned int addr); +static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value); +static __u16 rd_reg16(struct slgt_info *info, unsigned int addr); +static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value); +static __u32 rd_reg32(struct slgt_info *info, unsigned int addr); +static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value); + +static void msc_set_vcr(struct slgt_info *info); + +static int startup(struct slgt_info *info); +static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info); +static void shutdown(struct slgt_info *info); +static void program_hw(struct slgt_info *info); +static void change_params(struct slgt_info *info); + +static int register_test(struct slgt_info *info); +static int irq_test(struct slgt_info *info); +static int loopback_test(struct slgt_info *info); +static int adapter_test(struct slgt_info *info); + +static void reset_adapter(struct slgt_info *info); +static void reset_port(struct slgt_info *info); +static void async_mode(struct slgt_info *info); +static void sync_mode(struct slgt_info *info); + +static void rx_stop(struct slgt_info *info); +static void rx_start(struct slgt_info *info); +static void reset_rbufs(struct slgt_info *info); +static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); +static void rdma_reset(struct slgt_info *info); +static bool rx_get_frame(struct slgt_info *info); +static bool rx_get_buf(struct slgt_info *info); + +static void tx_start(struct slgt_info *info); +static void tx_stop(struct slgt_info *info); +static void tx_set_idle(struct slgt_info *info); +static unsigned int free_tbuf_count(struct slgt_info *info); +static unsigned int tbuf_bytes(struct slgt_info *info); +static void reset_tbufs(struct slgt_info *info); +static void tdma_reset(struct slgt_info *info); +static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); + +static void get_signals(struct slgt_info *info); +static void set_signals(struct slgt_info *info); +static void enable_loopback(struct slgt_info *info); +static void set_rate(struct slgt_info *info, u32 data_rate); + +static int bh_action(struct slgt_info *info); +static void bh_handler(struct work_struct *work); +static void bh_transmit(struct slgt_info *info); +static void isr_serial(struct slgt_info *info); +static void isr_rdma(struct slgt_info *info); +static void isr_txeom(struct slgt_info *info, unsigned short status); +static void isr_tdma(struct slgt_info *info); + +static int alloc_dma_bufs(struct slgt_info *info); +static void free_dma_bufs(struct slgt_info *info); +static int alloc_desc(struct slgt_info *info); +static void free_desc(struct slgt_info *info); +static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); +static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); + +static int alloc_tmp_rbuf(struct slgt_info *info); +static void free_tmp_rbuf(struct slgt_info *info); + +static void tx_timeout(unsigned long context); +static void rx_timeout(unsigned long context); + +/* + * ioctl handlers + */ +static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount); +static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params); +static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params); +static int get_txidle(struct slgt_info *info, int __user *idle_mode); +static int set_txidle(struct slgt_info *info, int idle_mode); +static int tx_enable(struct slgt_info *info, int enable); +static int tx_abort(struct slgt_info *info); +static int rx_enable(struct slgt_info *info, int enable); +static int modem_input_wait(struct slgt_info *info,int arg); +static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int set_break(struct tty_struct *tty, int break_state); +static int get_interface(struct slgt_info *info, int __user *if_mode); +static int set_interface(struct slgt_info *info, int if_mode); +static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); +static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); +static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); +static int get_xsync(struct slgt_info *info, int __user *if_mode); +static int set_xsync(struct slgt_info *info, int if_mode); +static int get_xctrl(struct slgt_info *info, int __user *if_mode); +static int set_xctrl(struct slgt_info *info, int if_mode); + +/* + * driver functions + */ +static void add_device(struct slgt_info *info); +static void device_init(int adapter_num, struct pci_dev *pdev); +static int claim_resources(struct slgt_info *info); +static void release_resources(struct slgt_info *info); + +/* + * DEBUG OUTPUT CODE + */ +#ifndef DBGINFO +#define DBGINFO(fmt) +#endif +#ifndef DBGERR +#define DBGERR(fmt) +#endif +#ifndef DBGBH +#define DBGBH(fmt) +#endif +#ifndef DBGISR +#define DBGISR(fmt) +#endif + +#ifdef DBGDATA +static void trace_block(struct slgt_info *info, const char *data, int count, const char *label) +{ + int i; + int linecount; + printk("%s %s data:\n",info->device_name, label); + while(count) { + linecount = (count > 16) ? 16 : count; + for(i=0; i < linecount; i++) + printk("%02X ",(unsigned char)data[i]); + for(;i<17;i++) + printk(" "); + for(i=0;i=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + data += linecount; + count -= linecount; + } +} +#else +#define DBGDATA(info, buf, size, label) +#endif + +#ifdef DBGTBUF +static void dump_tbufs(struct slgt_info *info) +{ + int i; + printk("tbuf_current=%d\n", info->tbuf_current); + for (i=0 ; i < info->tbuf_count ; i++) { + printk("%d: count=%04X status=%04X\n", + i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status)); + } +} +#else +#define DBGTBUF(info) +#endif + +#ifdef DBGRBUF +static void dump_rbufs(struct slgt_info *info) +{ + int i; + printk("rbuf_current=%d\n", info->rbuf_current); + for (i=0 ; i < info->rbuf_count ; i++) { + printk("%d: count=%04X status=%04X\n", + i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status)); + } +} +#else +#define DBGRBUF(info) +#endif + +static inline int sanity_check(struct slgt_info *info, char *devname, const char *name) +{ +#ifdef SANITY_CHECK + if (!info) { + printk("null struct slgt_info for (%s) in %s\n", devname, name); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/** + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->receive_buf) + ld->ops->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* tty callbacks */ + +static int open(struct tty_struct *tty, struct file *filp) +{ + struct slgt_info *info; + int retval, line; + unsigned long flags; + + line = tty->index; + if ((line < 0) || (line >= slgt_device_count)) { + DBGERR(("%s: open with invalid line #%d.\n", driver_name, line)); + return -ENODEV; + } + + info = slgt_device_list; + while(info && info->line != line) + info = info->next_device; + if (sanity_check(info, tty->name, "open")) + return -ENODEV; + if (info->init_error) { + DBGERR(("%s init error=%d\n", info->device_name, info->init_error)); + return -ENODEV; + } + + tty->driver_data = info; + info->port.tty = tty; + + DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count)); + + /* If port is closing, signal caller to try again */ + if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){ + if (info->port.flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->port.close_wait); + retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); + goto cleanup; + } + + mutex_lock(&info->port.mutex); + info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + mutex_unlock(&info->port.mutex); + goto cleanup; + } + info->port.count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->port.count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) { + mutex_unlock(&info->port.mutex); + goto cleanup; + } + } + mutex_unlock(&info->port.mutex); + retval = block_til_ready(tty, filp, info); + if (retval) { + DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); + goto cleanup; + } + + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->port.tty = NULL; /* tty layer will release tty struct */ + if(info->port.count) + info->port.count--; + } + + DBGINFO(("%s open rc=%d\n", info->device_name, retval)); + return retval; +} + +static void close(struct tty_struct *tty, struct file *filp) +{ + struct slgt_info *info = tty->driver_data; + + if (sanity_check(info, tty->name, "close")) + return; + DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); + + if (tty_port_close_start(&info->port, tty, filp) == 0) + goto cleanup; + + mutex_lock(&info->port.mutex); + if (info->port.flags & ASYNC_INITIALIZED) + wait_until_sent(tty, info->timeout); + flush_buffer(tty); + tty_ldisc_flush(tty); + + shutdown(info); + mutex_unlock(&info->port.mutex); + + tty_port_close_end(&info->port, tty); + info->port.tty = NULL; +cleanup: + DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); +} + +static void hangup(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "hangup")) + return; + DBGINFO(("%s hangup\n", info->device_name)); + + flush_buffer(tty); + + mutex_lock(&info->port.mutex); + shutdown(info); + + spin_lock_irqsave(&info->port.lock, flags); + info->port.count = 0; + info->port.flags &= ~ASYNC_NORMAL_ACTIVE; + info->port.tty = NULL; + spin_unlock_irqrestore(&info->port.lock, flags); + mutex_unlock(&info->port.mutex); + + wake_up_interruptible(&info->port.open_wait); +} + +static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + DBGINFO(("%s set_termios\n", tty->driver->name)); + + change_params(info); + + /* Handle transition to B0 status */ + if (old_termios->c_cflag & CBAUD && + !(tty->termios->c_cflag & CBAUD)) { + info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + tty->termios->c_cflag & CBAUD) { + info->signals |= SerialSignal_DTR; + if (!(tty->termios->c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { + info->signals |= SerialSignal_RTS; + } + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle turning off CRTSCTS */ + if (old_termios->c_cflag & CRTSCTS && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + tx_release(tty); + } +} + +static void update_tx_timer(struct slgt_info *info) +{ + /* + * use worst case speed of 1200bps to calculate transmit timeout + * based on data in buffers (tbuf_bytes) and FIFO (128 bytes) + */ + if (info->params.mode == MGSL_MODE_HDLC) { + int timeout = (tbuf_bytes(info) * 7) + 1000; + mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout)); + } +} + +static int write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int ret = 0; + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "write")) + return -EIO; + + DBGINFO(("%s write count=%d\n", info->device_name, count)); + + if (!info->tx_buf || (count > info->max_frame_size)) + return -EIO; + + if (!count || tty->stopped || tty->hw_stopped) + return 0; + + spin_lock_irqsave(&info->lock, flags); + + if (info->tx_count) { + /* send accumulated data from send_char() */ + if (!tx_load(info, info->tx_buf, info->tx_count)) + goto cleanup; + info->tx_count = 0; + } + + if (tx_load(info, buf, count)) + ret = count; + +cleanup: + spin_unlock_irqrestore(&info->lock, flags); + DBGINFO(("%s write rc=%d\n", info->device_name, ret)); + return ret; +} + +static int put_char(struct tty_struct *tty, unsigned char ch) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + int ret = 0; + + if (sanity_check(info, tty->name, "put_char")) + return 0; + DBGINFO(("%s put_char(%d)\n", info->device_name, ch)); + if (!info->tx_buf) + return 0; + spin_lock_irqsave(&info->lock,flags); + if (info->tx_count < info->max_frame_size) { + info->tx_buf[info->tx_count++] = ch; + ret = 1; + } + spin_unlock_irqrestore(&info->lock,flags); + return ret; +} + +static void send_xchar(struct tty_struct *tty, char ch) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "send_xchar")) + return; + DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch)); + info->x_char = ch; + if (ch) { + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +static void wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct slgt_info *info = tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + if (sanity_check(info, tty->name, "wait_until_sent")) + return; + DBGINFO(("%s wait_until_sent entry\n", info->device_name)); + if (!(info->port.flags & ASYNC_INITIALIZED)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if (info->params.data_rate) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } +exit: + DBGINFO(("%s wait_until_sent exit\n", info->device_name)); +} + +static int write_room(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + int ret; + + if (sanity_check(info, tty->name, "write_room")) + return 0; + ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; + DBGINFO(("%s write_room=%d\n", info->device_name, ret)); + return ret; +} + +static void flush_chars(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "flush_chars")) + return; + DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count)); + + if (info->tx_count <= 0 || tty->stopped || + tty->hw_stopped || !info->tx_buf) + return; + + DBGINFO(("%s flush_chars start transmit\n", info->device_name)); + + spin_lock_irqsave(&info->lock,flags); + if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock,flags); +} + +static void flush_buffer(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "flush_buffer")) + return; + DBGINFO(("%s flush_buffer\n", info->device_name)); + + spin_lock_irqsave(&info->lock, flags); + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock, flags); + + tty_wakeup(tty); +} + +/* + * throttle (stop) transmitter + */ +static void tx_hold(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_hold")) + return; + DBGINFO(("%s tx_hold\n", info->device_name)); + spin_lock_irqsave(&info->lock,flags); + if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC) + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* + * release (start) transmitter + */ +static void tx_release(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_release")) + return; + DBGINFO(("%s tx_release\n", info->device_name)); + spin_lock_irqsave(&info->lock, flags); + if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock, flags); +} + +/* + * Service an IOCTL request + * + * Arguments + * + * tty pointer to tty instance data + * cmd IOCTL command code + * arg command argument/context + * + * Return 0 if success, otherwise error code + */ +static int ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct slgt_info *info = tty->driver_data; + void __user *argp = (void __user *)arg; + int ret; + + if (sanity_check(info, tty->name, "ioctl")) + return -ENODEV; + DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCMIWAIT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case MGSL_IOCWAITEVENT: + return wait_mgsl_event(info, argp); + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + case MGSL_IOCSGPIO: + return set_gpio(info, argp); + case MGSL_IOCGGPIO: + return get_gpio(info, argp); + case MGSL_IOCWAITGPIO: + return wait_gpio(info, argp); + case MGSL_IOCGXSYNC: + return get_xsync(info, argp); + case MGSL_IOCSXSYNC: + return set_xsync(info, (int)arg); + case MGSL_IOCGXCTRL: + return get_xctrl(info, argp); + case MGSL_IOCSXCTRL: + return set_xctrl(info, (int)arg); + } + mutex_lock(&info->port.mutex); + switch (cmd) { + case MGSL_IOCGPARAMS: + ret = get_params(info, argp); + break; + case MGSL_IOCSPARAMS: + ret = set_params(info, argp); + break; + case MGSL_IOCGTXIDLE: + ret = get_txidle(info, argp); + break; + case MGSL_IOCSTXIDLE: + ret = set_txidle(info, (int)arg); + break; + case MGSL_IOCTXENABLE: + ret = tx_enable(info, (int)arg); + break; + case MGSL_IOCRXENABLE: + ret = rx_enable(info, (int)arg); + break; + case MGSL_IOCTXABORT: + ret = tx_abort(info); + break; + case MGSL_IOCGSTATS: + ret = get_stats(info, argp); + break; + case MGSL_IOCGIF: + ret = get_interface(info, argp); + break; + case MGSL_IOCSIF: + ret = set_interface(info,(int)arg); + break; + default: + ret = -ENOIOCTLCMD; + } + mutex_unlock(&info->port.mutex); + return ret; +} + +static int get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct slgt_info *info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +/* + * support for 32 bit ioctl calls on 64 bit systems + */ +#ifdef CONFIG_COMPAT +static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params) +{ + struct MGSL_PARAMS32 tmp_params; + + DBGINFO(("%s get_params32\n", info->device_name)); + memset(&tmp_params, 0, sizeof(tmp_params)); + tmp_params.mode = (compat_ulong_t)info->params.mode; + tmp_params.loopback = info->params.loopback; + tmp_params.flags = info->params.flags; + tmp_params.encoding = info->params.encoding; + tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed; + tmp_params.addr_filter = info->params.addr_filter; + tmp_params.crc_type = info->params.crc_type; + tmp_params.preamble_length = info->params.preamble_length; + tmp_params.preamble = info->params.preamble; + tmp_params.data_rate = (compat_ulong_t)info->params.data_rate; + tmp_params.data_bits = info->params.data_bits; + tmp_params.stop_bits = info->params.stop_bits; + tmp_params.parity = info->params.parity; + if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32))) + return -EFAULT; + return 0; +} + +static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params) +{ + struct MGSL_PARAMS32 tmp_params; + + DBGINFO(("%s set_params32\n", info->device_name)); + if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32))) + return -EFAULT; + + spin_lock(&info->lock); + if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) { + info->base_clock = tmp_params.clock_speed; + } else { + info->params.mode = tmp_params.mode; + info->params.loopback = tmp_params.loopback; + info->params.flags = tmp_params.flags; + info->params.encoding = tmp_params.encoding; + info->params.clock_speed = tmp_params.clock_speed; + info->params.addr_filter = tmp_params.addr_filter; + info->params.crc_type = tmp_params.crc_type; + info->params.preamble_length = tmp_params.preamble_length; + info->params.preamble = tmp_params.preamble; + info->params.data_rate = tmp_params.data_rate; + info->params.data_bits = tmp_params.data_bits; + info->params.stop_bits = tmp_params.stop_bits; + info->params.parity = tmp_params.parity; + } + spin_unlock(&info->lock); + + program_hw(info); + + return 0; +} + +static long slgt_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct slgt_info *info = tty->driver_data; + int rc = -ENOIOCTLCMD; + + if (sanity_check(info, tty->name, "compat_ioctl")) + return -ENODEV; + DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd)); + + switch (cmd) { + + case MGSL_IOCSPARAMS32: + rc = set_params32(info, compat_ptr(arg)); + break; + + case MGSL_IOCGPARAMS32: + rc = get_params32(info, compat_ptr(arg)); + break; + + case MGSL_IOCGPARAMS: + case MGSL_IOCSPARAMS: + case MGSL_IOCGTXIDLE: + case MGSL_IOCGSTATS: + case MGSL_IOCWAITEVENT: + case MGSL_IOCGIF: + case MGSL_IOCSGPIO: + case MGSL_IOCGGPIO: + case MGSL_IOCWAITGPIO: + case MGSL_IOCGXSYNC: + case MGSL_IOCGXCTRL: + case MGSL_IOCSTXIDLE: + case MGSL_IOCTXENABLE: + case MGSL_IOCRXENABLE: + case MGSL_IOCTXABORT: + case TIOCMIWAIT: + case MGSL_IOCSIF: + case MGSL_IOCSXSYNC: + case MGSL_IOCSXCTRL: + rc = ioctl(tty, cmd, arg); + break; + } + + DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc)); + return rc; +} +#else +#define slgt_compat_ioctl NULL +#endif /* ifdef CONFIG_COMPAT */ + +/* + * proc fs support + */ +static inline void line_info(struct seq_file *m, struct slgt_info *info) +{ + char stat_buf[30]; + unsigned long flags; + + seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n", + info->device_name, info->phys_reg_addr, + info->irq_level, info->max_frame_size); + + /* output current serial signal states */ + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode != MGSL_MODE_ASYNC) { + seq_printf(m, "\tHDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + seq_printf(m, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + seq_printf(m, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + seq_printf(m, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + seq_printf(m, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + seq_printf(m, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + seq_printf(m, " rxcrc:%d", info->icount.rxcrc); + } else { + seq_printf(m, "\tASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + seq_printf(m, " fe:%d", info->icount.frame); + if (info->icount.parity) + seq_printf(m, " pe:%d", info->icount.parity); + if (info->icount.brk) + seq_printf(m, " brk:%d", info->icount.brk); + if (info->icount.overrun) + seq_printf(m, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + seq_printf(m, " %s\n", stat_buf+1); + + seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); +} + +/* Called to print information about devices + */ +static int synclink_gt_proc_show(struct seq_file *m, void *v) +{ + struct slgt_info *info; + + seq_puts(m, "synclink_gt driver\n"); + + info = slgt_device_list; + while( info ) { + line_info(m, info); + info = info->next_device; + } + return 0; +} + +static int synclink_gt_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, synclink_gt_proc_show, NULL); +} + +static const struct file_operations synclink_gt_proc_fops = { + .owner = THIS_MODULE, + .open = synclink_gt_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * return count of bytes in transmit buffer + */ +static int chars_in_buffer(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + int count; + if (sanity_check(info, tty->name, "chars_in_buffer")) + return 0; + count = tbuf_bytes(info); + DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count)); + return count; +} + +/* + * signal remote device to throttle send data (our receive data) + */ +static void throttle(struct tty_struct * tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "throttle")) + return; + DBGINFO(("%s throttle\n", info->device_name)); + if (I_IXOFF(tty)) + send_xchar(tty, STOP_CHAR(tty)); + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock,flags); + info->signals &= ~SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* + * signal remote device to stop throttling send data (our receive data) + */ +static void unthrottle(struct tty_struct * tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "unthrottle")) + return; + DBGINFO(("%s unthrottle\n", info->device_name)); + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + send_xchar(tty, START_CHAR(tty)); + } + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock,flags); + info->signals |= SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* + * set or clear transmit break condition + * break_state -1=set break condition, 0=clear + */ +static int set_break(struct tty_struct *tty, int break_state) +{ + struct slgt_info *info = tty->driver_data; + unsigned short value; + unsigned long flags; + + if (sanity_check(info, tty->name, "set_break")) + return -EINVAL; + DBGINFO(("%s set_break(%d)\n", info->device_name, break_state)); + + spin_lock_irqsave(&info->lock,flags); + value = rd_reg16(info, TCR); + if (break_state == -1) + value |= BIT6; + else + value &= ~BIT6; + wr_reg16(info, TCR, value); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +#if SYNCLINK_GENERIC_HDLC + +/** + * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * set encoding and frame check sequence (FCS) options + * + * dev pointer to network device structure + * encoding serial encoding setting + * parity FCS setting + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + DBGINFO(("%s hdlcdev_attach\n", info->device_name)); + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + + return 0; +} + +/** + * called by generic HDLC layer to send frame + * + * skb socket buffer containing HDLC frame + * dev pointer to network device structure + */ +static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned long flags; + + DBGINFO(("%s hdlc_xmit\n", dev->name)); + + if (!skb->len) + return NETDEV_TX_OK; + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* update network statistics */ + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + + /* save start time for transmit timeout detection */ + dev->trans_start = jiffies; + + spin_lock_irqsave(&info->lock, flags); + tx_load(info, skb->data, skb->len); + spin_unlock_irqrestore(&info->lock, flags); + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +/** + * called by network layer when interface enabled + * claim resources and initialize hardware + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + int rc; + unsigned long flags; + + if (!try_module_get(THIS_MODULE)) + return -EBUSY; + + DBGINFO(("%s hdlcdev_open\n", dev->name)); + + /* generic HDLC layer open processing */ + if ((rc = hdlc_open(dev))) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->port.count != 0 || info->netcount != 0) { + DBGINFO(("%s hdlc_open busy\n", dev->name)); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert DTR and RTS, apply hardware settings */ + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + program_hw(info); + + /* enable network layer transmit */ + dev->trans_start = jiffies; + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->lock, flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock, flags); + if (info->signals & SerialSignal_DCD) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + +/** + * called by network layer when interface is disabled + * shutdown hardware and release resources + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned long flags; + + DBGINFO(("%s hdlcdev_close\n", dev->name)); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + module_put(THIS_MODULE); + return 0; +} + +/** + * called by network layer to process IOCTL call to network device + * + * dev pointer to network device structure + * ifr pointer to network interface request structure + * cmd IOCTL command code + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + struct slgt_info *info = dev_to_port(dev); + unsigned int flags; + + DBGINFO(("%s hdlcdev_ioctl\n", dev->name)); + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + memset(&new_line, 0, sizeof(new_line)); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * called by network layer when transmit timeout is detected + * + * dev pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned long flags; + + DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name)); + + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + + spin_lock_irqsave(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); + + netif_wake_queue(dev); +} + +/** + * called by device driver when transmit completes + * reenable network layer transmit if stopped + * + * info pointer to device instance information + */ +static void hdlcdev_tx_done(struct slgt_info *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * called by device driver when frame received + * pass frame to network layer + * + * info pointer to device instance information + * buf pointer to buffer contianing frame data + * size count of data bytes in buf + */ +static void hdlcdev_rx(struct slgt_info *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + + DBGINFO(("%s hdlcdev_rx\n", dev->name)); + + if (skb == NULL) { + DBGERR(("%s: can't alloc skb, drop packet\n", dev->name)); + dev->stats.rx_dropped++; + return; + } + + memcpy(skb_put(skb, size), buf, size); + + skb->protocol = hdlc_type_trans(skb, dev); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += size; + + netif_rx(skb); +} + +static const struct net_device_ops hdlcdev_ops = { + .ndo_open = hdlcdev_open, + .ndo_stop = hdlcdev_close, + .ndo_change_mtu = hdlc_change_mtu, + .ndo_start_xmit = hdlc_start_xmit, + .ndo_do_ioctl = hdlcdev_ioctl, + .ndo_tx_timeout = hdlcdev_tx_timeout, +}; + +/** + * called by device driver when adding device instance + * do generic HDLC initialization + * + * info pointer to device instance information + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_init(struct slgt_info *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + if (!(dev = alloc_hdlcdev(info))) { + printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->mem_start = info->phys_reg_addr; + dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1; + dev->irq = info->irq_level; + + /* network layer callbacks and settings */ + dev->netdev_ops = &hdlcdev_ops; + dev->watchdog_timeo = 10 * HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + if ((rc = register_hdlc_device(dev))) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * called by device driver when removing device instance + * do generic HDLC cleanup + * + * info pointer to device instance information + */ +static void hdlcdev_exit(struct slgt_info *info) +{ + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* ifdef CONFIG_HDLC */ + +/* + * get async data from rx DMA buffers + */ +static void rx_async(struct slgt_info *info) +{ + struct tty_struct *tty = info->port.tty; + struct mgsl_icount *icount = &info->icount; + unsigned int start, end; + unsigned char *p; + unsigned char status; + struct slgt_desc *bufs = info->rbufs; + int i, count; + int chars = 0; + int stat; + unsigned char ch; + + start = end = info->rbuf_current; + + while(desc_complete(bufs[end])) { + count = desc_count(bufs[end]) - info->rbuf_index; + p = bufs[end].buf + info->rbuf_index; + + DBGISR(("%s rx_async count=%d\n", info->device_name, count)); + DBGDATA(info, p, count, "rx"); + + for(i=0 ; i < count; i+=2, p+=2) { + ch = *p; + icount->rx++; + + stat = 0; + + if ((status = *(p+1) & (BIT1 + BIT0))) { + if (status & BIT1) + icount->parity++; + else if (status & BIT0) + icount->frame++; + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask) + continue; + if (status & BIT1) + stat = TTY_PARITY; + else if (status & BIT0) + stat = TTY_FRAME; + } + if (tty) { + tty_insert_flip_char(tty, ch, stat); + chars++; + } + } + + if (i < count) { + /* receive buffer not completed */ + info->rbuf_index += i; + mod_timer(&info->rx_timer, jiffies + 1); + break; + } + + info->rbuf_index = 0; + free_rbufs(info, end, end); + + if (++end == info->rbuf_count) + end = 0; + + /* if entire list searched then no frame available */ + if (end == start) + break; + } + + if (tty && chars) + tty_flip_buffer_push(tty); +} + +/* + * return next bottom half action to perform + */ +static int bh_action(struct slgt_info *info) +{ + unsigned long flags; + int rc; + + spin_lock_irqsave(&info->lock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } else { + /* Mark BH routine as complete */ + info->bh_running = false; + info->bh_requested = false; + rc = 0; + } + + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +/* + * perform bottom half processing + */ +static void bh_handler(struct work_struct *work) +{ + struct slgt_info *info = container_of(work, struct slgt_info, task); + int action; + + if (!info) + return; + info->bh_running = true; + + while((action = bh_action(info))) { + switch (action) { + case BH_RECEIVE: + DBGBH(("%s bh receive\n", info->device_name)); + switch(info->params.mode) { + case MGSL_MODE_ASYNC: + rx_async(info); + break; + case MGSL_MODE_HDLC: + while(rx_get_frame(info)); + break; + case MGSL_MODE_RAW: + case MGSL_MODE_MONOSYNC: + case MGSL_MODE_BISYNC: + case MGSL_MODE_XSYNC: + while(rx_get_buf(info)); + break; + } + /* restart receiver if rx DMA buffers exhausted */ + if (info->rx_restart) + rx_start(info); + break; + case BH_TRANSMIT: + bh_transmit(info); + break; + case BH_STATUS: + DBGBH(("%s bh status\n", info->device_name)); + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + break; + default: + DBGBH(("%s unknown action\n", info->device_name)); + break; + } + } + DBGBH(("%s bh_handler exit\n", info->device_name)); +} + +static void bh_transmit(struct slgt_info *info) +{ + struct tty_struct *tty = info->port.tty; + + DBGBH(("%s bh_transmit\n", info->device_name)); + if (tty) + tty_wakeup(tty); +} + +static void dsr_change(struct slgt_info *info, unsigned short status) +{ + if (status & BIT3) { + info->signals |= SerialSignal_DSR; + info->input_signal_events.dsr_up++; + } else { + info->signals &= ~SerialSignal_DSR; + info->input_signal_events.dsr_down++; + } + DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_DSR); + return; + } + info->icount.dsr++; + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; +} + +static void cts_change(struct slgt_info *info, unsigned short status) +{ + if (status & BIT2) { + info->signals |= SerialSignal_CTS; + info->input_signal_events.cts_up++; + } else { + info->signals &= ~SerialSignal_CTS; + info->input_signal_events.cts_down++; + } + DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_CTS); + return; + } + info->icount.cts++; + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; + + if (info->port.flags & ASYNC_CTS_FLOW) { + if (info->port.tty) { + if (info->port.tty->hw_stopped) { + if (info->signals & SerialSignal_CTS) { + info->port.tty->hw_stopped = 0; + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(info->signals & SerialSignal_CTS)) + info->port.tty->hw_stopped = 1; + } + } + } +} + +static void dcd_change(struct slgt_info *info, unsigned short status) +{ + if (status & BIT1) { + info->signals |= SerialSignal_DCD; + info->input_signal_events.dcd_up++; + } else { + info->signals &= ~SerialSignal_DCD; + info->input_signal_events.dcd_down++; + } + DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_DCD); + return; + } + info->icount.dcd++; +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) { + if (info->signals & SerialSignal_DCD) + netif_carrier_on(info->netdev); + else + netif_carrier_off(info->netdev); + } +#endif + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; + + if (info->port.flags & ASYNC_CHECK_CD) { + if (info->signals & SerialSignal_DCD) + wake_up_interruptible(&info->port.open_wait); + else { + if (info->port.tty) + tty_hangup(info->port.tty); + } + } +} + +static void ri_change(struct slgt_info *info, unsigned short status) +{ + if (status & BIT0) { + info->signals |= SerialSignal_RI; + info->input_signal_events.ri_up++; + } else { + info->signals &= ~SerialSignal_RI; + info->input_signal_events.ri_down++; + } + DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_RI); + return; + } + info->icount.rng++; + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; +} + +static void isr_rxdata(struct slgt_info *info) +{ + unsigned int count = info->rbuf_fill_count; + unsigned int i = info->rbuf_fill_index; + unsigned short reg; + + while (rd_reg16(info, SSR) & IRQ_RXDATA) { + reg = rd_reg16(info, RDR); + DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); + if (desc_complete(info->rbufs[i])) { + /* all buffers full */ + rx_stop(info); + info->rx_restart = 1; + continue; + } + info->rbufs[i].buf[count++] = (unsigned char)reg; + /* async mode saves status byte to buffer for each data byte */ + if (info->params.mode == MGSL_MODE_ASYNC) + info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); + if (count == info->rbuf_fill_level || (reg & BIT10)) { + /* buffer full or end of frame */ + set_desc_count(info->rbufs[i], count); + set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); + info->rbuf_fill_count = count = 0; + if (++i == info->rbuf_count) + i = 0; + info->pending_bh |= BH_RECEIVE; + } + } + + info->rbuf_fill_index = i; + info->rbuf_fill_count = count; +} + +static void isr_serial(struct slgt_info *info) +{ + unsigned short status = rd_reg16(info, SSR); + + DBGISR(("%s isr_serial status=%04X\n", info->device_name, status)); + + wr_reg16(info, SSR, status); /* clear pending */ + + info->irq_occurred = true; + + if (info->params.mode == MGSL_MODE_ASYNC) { + if (status & IRQ_TXIDLE) { + if (info->tx_active) + isr_txeom(info, status); + } + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); + if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { + info->icount.brk++; + /* process break detection if tty control allows */ + if (info->port.tty) { + if (!(status & info->ignore_status_mask)) { + if (info->read_status_mask & MASK_BREAK) { + tty_insert_flip_char(info->port.tty, 0, TTY_BREAK); + if (info->port.flags & ASYNC_SAK) + do_SAK(info->port.tty); + } + } + } + } + } else { + if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) + isr_txeom(info, status); + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); + if (status & IRQ_RXIDLE) { + if (status & RXIDLE) + info->icount.rxidle++; + else + info->icount.exithunt++; + wake_up_interruptible(&info->event_wait_q); + } + + if (status & IRQ_RXOVER) + rx_start(info); + } + + if (status & IRQ_DSR) + dsr_change(info, status); + if (status & IRQ_CTS) + cts_change(info, status); + if (status & IRQ_DCD) + dcd_change(info, status); + if (status & IRQ_RI) + ri_change(info, status); +} + +static void isr_rdma(struct slgt_info *info) +{ + unsigned int status = rd_reg32(info, RDCSR); + + DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status)); + + /* RDCSR (rx DMA control/status) + * + * 31..07 reserved + * 06 save status byte to DMA buffer + * 05 error + * 04 eol (end of list) + * 03 eob (end of buffer) + * 02 IRQ enable + * 01 reset + * 00 enable + */ + wr_reg32(info, RDCSR, status); /* clear pending */ + + if (status & (BIT5 + BIT4)) { + DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name)); + info->rx_restart = true; + } + info->pending_bh |= BH_RECEIVE; +} + +static void isr_tdma(struct slgt_info *info) +{ + unsigned int status = rd_reg32(info, TDCSR); + + DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status)); + + /* TDCSR (tx DMA control/status) + * + * 31..06 reserved + * 05 error + * 04 eol (end of list) + * 03 eob (end of buffer) + * 02 IRQ enable + * 01 reset + * 00 enable + */ + wr_reg32(info, TDCSR, status); /* clear pending */ + + if (status & (BIT5 + BIT4 + BIT3)) { + // another transmit buffer has completed + // run bottom half to get more send data from user + info->pending_bh |= BH_TRANSMIT; + } +} + +/* + * return true if there are unsent tx DMA buffers, otherwise false + * + * if there are unsent buffers then info->tbuf_start + * is set to index of first unsent buffer + */ +static bool unsent_tbufs(struct slgt_info *info) +{ + unsigned int i = info->tbuf_current; + bool rc = false; + + /* + * search backwards from last loaded buffer (precedes tbuf_current) + * for first unsent buffer (desc_count > 0) + */ + + do { + if (i) + i--; + else + i = info->tbuf_count - 1; + if (!desc_count(info->tbufs[i])) + break; + info->tbuf_start = i; + rc = true; + } while (i != info->tbuf_current); + + return rc; +} + +static void isr_txeom(struct slgt_info *info, unsigned short status) +{ + DBGISR(("%s txeom status=%04x\n", info->device_name, status)); + + slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); + tdma_reset(info); + if (status & IRQ_TXUNDER) { + unsigned short val = rd_reg16(info, TCR); + wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, TCR, val); /* clear reset bit */ + } + + if (info->tx_active) { + if (info->params.mode != MGSL_MODE_ASYNC) { + if (status & IRQ_TXUNDER) + info->icount.txunder++; + else if (status & IRQ_TXIDLE) + info->icount.txok++; + } + + if (unsent_tbufs(info)) { + tx_start(info); + update_tx_timer(info); + return; + } + info->tx_active = false; + + del_timer(&info->tx_timer); + + if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { + info->signals &= ~SerialSignal_RTS; + info->drop_rts_on_tx_done = false; + set_signals(info); + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { + tx_stop(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + } +} + +static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state) +{ + struct cond_wait *w, *prev; + + /* wake processes waiting for specific transitions */ + for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) { + if (w->data & changed) { + w->data = state; + wake_up_interruptible(&w->q); + if (prev != NULL) + prev->next = w->next; + else + info->gpio_wait_q = w->next; + } else + prev = w; + } +} + +/* interrupt service routine + * + * irq interrupt number + * dev_id device ID supplied during interrupt registration + */ +static irqreturn_t slgt_interrupt(int dummy, void *dev_id) +{ + struct slgt_info *info = dev_id; + unsigned int gsr; + unsigned int i; + + DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level)); + + while((gsr = rd_reg32(info, GSR) & 0xffffff00)) { + DBGISR(("%s gsr=%08x\n", info->device_name, gsr)); + info->irq_occurred = true; + for(i=0; i < info->port_count ; i++) { + if (info->port_array[i] == NULL) + continue; + spin_lock(&info->port_array[i]->lock); + if (gsr & (BIT8 << i)) + isr_serial(info->port_array[i]); + if (gsr & (BIT16 << (i*2))) + isr_rdma(info->port_array[i]); + if (gsr & (BIT17 << (i*2))) + isr_tdma(info->port_array[i]); + spin_unlock(&info->port_array[i]->lock); + } + } + + if (info->gpio_present) { + unsigned int state; + unsigned int changed; + spin_lock(&info->lock); + while ((changed = rd_reg32(info, IOSR)) != 0) { + DBGISR(("%s iosr=%08x\n", info->device_name, changed)); + /* read latched state of GPIO signals */ + state = rd_reg32(info, IOVR); + /* clear pending GPIO interrupt bits */ + wr_reg32(info, IOSR, changed); + for (i=0 ; i < info->port_count ; i++) { + if (info->port_array[i] != NULL) + isr_gpio(info->port_array[i], changed, state); + } + } + spin_unlock(&info->lock); + } + + for(i=0; i < info->port_count ; i++) { + struct slgt_info *port = info->port_array[i]; + if (port == NULL) + continue; + spin_lock(&port->lock); + if ((port->port.count || port->netcount) && + port->pending_bh && !port->bh_running && + !port->bh_requested) { + DBGISR(("%s bh queued\n", port->device_name)); + schedule_work(&port->task); + port->bh_requested = true; + } + spin_unlock(&port->lock); + } + + DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level)); + return IRQ_HANDLED; +} + +static int startup(struct slgt_info *info) +{ + DBGINFO(("%s startup\n", info->device_name)); + + if (info->port.flags & ASYNC_INITIALIZED) + return 0; + + if (!info->tx_buf) { + info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (!info->tx_buf) { + DBGERR(("%s can't allocate tx buffer\n", info->device_name)); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + memset(&info->icount, 0, sizeof(info->icount)); + + /* program hardware for current parameters */ + change_params(info); + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->port.flags |= ASYNC_INITIALIZED; + + return 0; +} + +/* + * called by close() and hangup() to shutdown hardware + */ +static void shutdown(struct slgt_info *info) +{ + unsigned long flags; + + if (!(info->port.flags & ASYNC_INITIALIZED)) + return; + + DBGINFO(("%s shutdown\n", info->device_name)); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer_sync(&info->tx_timer); + del_timer_sync(&info->rx_timer); + + kfree(info->tx_buf); + info->tx_buf = NULL; + + spin_lock_irqsave(&info->lock,flags); + + tx_stop(info); + rx_stop(info); + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + + if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { + info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + set_signals(info); + } + + flush_cond_wait(&info->gpio_wait_q); + + spin_unlock_irqrestore(&info->lock,flags); + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->port.flags &= ~ASYNC_INITIALIZED; +} + +static void program_hw(struct slgt_info *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + + rx_stop(info); + tx_stop(info); + + if (info->params.mode != MGSL_MODE_ASYNC || + info->netcount) + sync_mode(info); + else + async_mode(info); + + set_signals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); + get_signals(info); + + if (info->netcount || + (info->port.tty && info->port.tty->termios->c_cflag & CREAD)) + rx_start(info); + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* + * reconfigure adapter based on new parameters + */ +static void change_params(struct slgt_info *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->port.tty || !info->port.tty->termios) + return; + DBGINFO(("%s change_params\n", info->device_name)); + + cflag = info->port.tty->termios->c_cflag; + + /* if B0 rate (hangup) specified then negate DTR and RTS */ + /* otherwise assert DTR and RTS */ + if (cflag & CBAUD) + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + default: info->params.data_bits = 7; break; + } + + info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1; + + if (cflag & PARENB) + info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN; + else + info->params.parity = ASYNC_PARITY_NONE; + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + info->params.data_rate = tty_get_baud_rate(info->port.tty); + + if (info->params.data_rate) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + if (cflag & CRTSCTS) + info->port.flags |= ASYNC_CTS_FLOW; + else + info->port.flags &= ~ASYNC_CTS_FLOW; + + if (cflag & CLOCAL) + info->port.flags &= ~ASYNC_CHECK_CD; + else + info->port.flags |= ASYNC_CHECK_CD; + + /* process tty input control flags */ + + info->read_status_mask = IRQ_RXOVER; + if (I_INPCK(info->port.tty)) + info->read_status_mask |= MASK_PARITY | MASK_FRAMING; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= MASK_BREAK; + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; + if (I_IGNBRK(info->port.tty)) { + info->ignore_status_mask |= MASK_BREAK; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= MASK_OVERRUN; + } + + program_hw(info); +} + +static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount) +{ + DBGINFO(("%s get_stats\n", info->device_name)); + if (!user_icount) { + memset(&info->icount, 0, sizeof(info->icount)); + } else { + if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount))) + return -EFAULT; + } + return 0; +} + +static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params) +{ + DBGINFO(("%s get_params\n", info->device_name)); + if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS))) + return -EFAULT; + return 0; +} + +static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + + DBGINFO(("%s set_params\n", info->device_name)); + if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS))) + return -EFAULT; + + spin_lock_irqsave(&info->lock, flags); + if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) + info->base_clock = tmp_params.clock_speed; + else + memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->lock, flags); + + program_hw(info); + + return 0; +} + +static int get_txidle(struct slgt_info *info, int __user *idle_mode) +{ + DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode)); + if (put_user(info->idle_mode, idle_mode)) + return -EFAULT; + return 0; +} + +static int set_txidle(struct slgt_info *info, int idle_mode) +{ + unsigned long flags; + DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode)); + spin_lock_irqsave(&info->lock,flags); + info->idle_mode = idle_mode; + if (info->params.mode != MGSL_MODE_ASYNC) + tx_set_idle(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int tx_enable(struct slgt_info *info, int enable) +{ + unsigned long flags; + DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable)); + spin_lock_irqsave(&info->lock,flags); + if (enable) { + if (!info->tx_enabled) + tx_start(info); + } else { + if (info->tx_enabled) + tx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* + * abort transmit HDLC frame + */ +static int tx_abort(struct slgt_info *info) +{ + unsigned long flags; + DBGINFO(("%s tx_abort\n", info->device_name)); + spin_lock_irqsave(&info->lock,flags); + tdma_reset(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int rx_enable(struct slgt_info *info, int enable) +{ + unsigned long flags; + unsigned int rbuf_fill_level; + DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable)); + spin_lock_irqsave(&info->lock,flags); + /* + * enable[31..16] = receive DMA buffer fill level + * 0 = noop (leave fill level unchanged) + * fill level must be multiple of 4 and <= buffer size + */ + rbuf_fill_level = ((unsigned int)enable) >> 16; + if (rbuf_fill_level) { + if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) { + spin_unlock_irqrestore(&info->lock, flags); + return -EINVAL; + } + info->rbuf_fill_level = rbuf_fill_level; + if (rbuf_fill_level < 128) + info->rx_pio = 1; /* PIO mode */ + else + info->rx_pio = 0; /* DMA mode */ + rx_stop(info); /* restart receiver to use new fill level */ + } + + /* + * enable[1..0] = receiver enable command + * 0 = disable + * 1 = enable + * 2 = enable or force hunt mode if already enabled + */ + enable &= 3; + if (enable) { + if (!info->rx_enabled) + rx_start(info); + else if (enable == 2) { + /* force hunt mode (write 1 to RCR[3]) */ + wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3); + } + } else { + if (info->rx_enabled) + rx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* + * wait for specified event to occur + */ +static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + if (get_user(mask, mask_ptr)) + return -EFAULT; + + DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask)); + + spin_lock_irqsave(&info->lock,flags); + + /* return immediately if state matches requested events */ + get_signals(info); + s = info->signals; + + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->lock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { + unsigned short val = rd_reg16(info, SCR); + if (!(val & IRQ_RXIDLE)) + wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE)); + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->lock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + wr_reg16(info, SCR, + (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE)); + } + spin_unlock_irqrestore(&info->lock,flags); + } +exit: + if (rc == 0) + rc = put_user(events, mask_ptr); + return rc; +} + +static int get_interface(struct slgt_info *info, int __user *if_mode) +{ + DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode)); + if (put_user(info->if_mode, if_mode)) + return -EFAULT; + return 0; +} + +static int set_interface(struct slgt_info *info, int if_mode) +{ + unsigned long flags; + unsigned short val; + + DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode)); + spin_lock_irqsave(&info->lock,flags); + info->if_mode = if_mode; + + msc_set_vcr(info); + + /* TCR (tx control) 07 1=RTS driver control */ + val = rd_reg16(info, TCR); + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + else + val &= ~BIT7; + wr_reg16(info, TCR, val); + + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int get_xsync(struct slgt_info *info, int __user *xsync) +{ + DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync)); + if (put_user(info->xsync, xsync)) + return -EFAULT; + return 0; +} + +/* + * set extended sync pattern (1 to 4 bytes) for extended sync mode + * + * sync pattern is contained in least significant bytes of value + * most significant byte of sync pattern is oldest (1st sent/detected) + */ +static int set_xsync(struct slgt_info *info, int xsync) +{ + unsigned long flags; + + DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync)); + spin_lock_irqsave(&info->lock, flags); + info->xsync = xsync; + wr_reg32(info, XSR, xsync); + spin_unlock_irqrestore(&info->lock, flags); + return 0; +} + +static int get_xctrl(struct slgt_info *info, int __user *xctrl) +{ + DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl)); + if (put_user(info->xctrl, xctrl)) + return -EFAULT; + return 0; +} + +/* + * set extended control options + * + * xctrl[31:19] reserved, must be zero + * xctrl[18:17] extended sync pattern length in bytes + * 00 = 1 byte in xsr[7:0] + * 01 = 2 bytes in xsr[15:0] + * 10 = 3 bytes in xsr[23:0] + * 11 = 4 bytes in xsr[31:0] + * xctrl[16] 1 = enable terminal count, 0=disabled + * xctrl[15:0] receive terminal count for fixed length packets + * value is count minus one (0 = 1 byte packet) + * when terminal count is reached, receiver + * automatically returns to hunt mode and receive + * FIFO contents are flushed to DMA buffers with + * end of frame (EOF) status + */ +static int set_xctrl(struct slgt_info *info, int xctrl) +{ + unsigned long flags; + + DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl)); + spin_lock_irqsave(&info->lock, flags); + info->xctrl = xctrl; + wr_reg32(info, XCR, xctrl); + spin_unlock_irqrestore(&info->lock, flags); + return 0; +} + +/* + * set general purpose IO pin state and direction + * + * user_gpio fields: + * state each bit indicates a pin state + * smask set bit indicates pin state to set + * dir each bit indicates a pin direction (0=input, 1=output) + * dmask set bit indicates pin direction to set + */ +static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) +{ + unsigned long flags; + struct gpio_desc gpio; + __u32 data; + + if (!info->gpio_present) + return -EINVAL; + if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) + return -EFAULT; + DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n", + info->device_name, gpio.state, gpio.smask, + gpio.dir, gpio.dmask)); + + spin_lock_irqsave(&info->port_array[0]->lock, flags); + if (gpio.dmask) { + data = rd_reg32(info, IODR); + data |= gpio.dmask & gpio.dir; + data &= ~(gpio.dmask & ~gpio.dir); + wr_reg32(info, IODR, data); + } + if (gpio.smask) { + data = rd_reg32(info, IOVR); + data |= gpio.smask & gpio.state; + data &= ~(gpio.smask & ~gpio.state); + wr_reg32(info, IOVR, data); + } + spin_unlock_irqrestore(&info->port_array[0]->lock, flags); + + return 0; +} + +/* + * get general purpose IO pin state and direction + */ +static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) +{ + struct gpio_desc gpio; + if (!info->gpio_present) + return -EINVAL; + gpio.state = rd_reg32(info, IOVR); + gpio.smask = 0xffffffff; + gpio.dir = rd_reg32(info, IODR); + gpio.dmask = 0xffffffff; + if (copy_to_user(user_gpio, &gpio, sizeof(gpio))) + return -EFAULT; + DBGINFO(("%s get_gpio state=%08x dir=%08x\n", + info->device_name, gpio.state, gpio.dir)); + return 0; +} + +/* + * conditional wait facility + */ +static void init_cond_wait(struct cond_wait *w, unsigned int data) +{ + init_waitqueue_head(&w->q); + init_waitqueue_entry(&w->wait, current); + w->data = data; +} + +static void add_cond_wait(struct cond_wait **head, struct cond_wait *w) +{ + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&w->q, &w->wait); + w->next = *head; + *head = w; +} + +static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw) +{ + struct cond_wait *w, *prev; + remove_wait_queue(&cw->q, &cw->wait); + set_current_state(TASK_RUNNING); + for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) { + if (w == cw) { + if (prev != NULL) + prev->next = w->next; + else + *head = w->next; + break; + } + } +} + +static void flush_cond_wait(struct cond_wait **head) +{ + while (*head != NULL) { + wake_up_interruptible(&(*head)->q); + *head = (*head)->next; + } +} + +/* + * wait for general purpose I/O pin(s) to enter specified state + * + * user_gpio fields: + * state - bit indicates target pin state + * smask - set bit indicates watched pin + * + * The wait ends when at least one watched pin enters the specified + * state. When 0 (no error) is returned, user_gpio->state is set to the + * state of all GPIO pins when the wait ends. + * + * Note: Each pin may be a dedicated input, dedicated output, or + * configurable input/output. The number and configuration of pins + * varies with the specific adapter model. Only input pins (dedicated + * or configured) can be monitored with this function. + */ +static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) +{ + unsigned long flags; + int rc = 0; + struct gpio_desc gpio; + struct cond_wait wait; + u32 state; + + if (!info->gpio_present) + return -EINVAL; + if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) + return -EFAULT; + DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n", + info->device_name, gpio.state, gpio.smask)); + /* ignore output pins identified by set IODR bit */ + if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0) + return -EINVAL; + init_cond_wait(&wait, gpio.smask); + + spin_lock_irqsave(&info->port_array[0]->lock, flags); + /* enable interrupts for watched pins */ + wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask); + /* get current pin states */ + state = rd_reg32(info, IOVR); + + if (gpio.smask & ~(state ^ gpio.state)) { + /* already in target state */ + gpio.state = state; + } else { + /* wait for target state */ + add_cond_wait(&info->gpio_wait_q, &wait); + spin_unlock_irqrestore(&info->port_array[0]->lock, flags); + schedule(); + if (signal_pending(current)) + rc = -ERESTARTSYS; + else + gpio.state = wait.data; + spin_lock_irqsave(&info->port_array[0]->lock, flags); + remove_cond_wait(&info->gpio_wait_q, &wait); + } + + /* disable all GPIO interrupts if no waiting processes */ + if (info->gpio_wait_q == NULL) + wr_reg32(info, IOER, 0); + spin_unlock_irqrestore(&info->port_array[0]->lock, flags); + + if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio))) + rc = -EFAULT; + return rc; +} + +static int modem_input_wait(struct slgt_info *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* + * return state of serial control and status signals + */ +static int tiocmget(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + + ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) + + ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) + + ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) + + ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) + + ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0); + + DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result)); + return result; +} + +/* + * set modem control signals (DTR/RTS) + * + * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit + * TIOCMSET = set/clear signal values + * value bit mask for command + */ +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear)); + + if (set & TIOCM_RTS) + info->signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return (info->signals & SerialSignal_DCD) ? 1 : 0; +} + +static void dtr_rts(struct tty_port *port, int on) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + if (on) + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} + + +/* + * block current process until the device is ready to open + */ +static int block_til_ready(struct tty_struct *tty, struct file *filp, + struct slgt_info *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + bool do_clocal = false; + bool extra_count = false; + unsigned long flags; + int cd; + struct tty_port *port = &info->port; + + DBGINFO(("%s block_til_ready\n", tty->driver->name)); + + if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ + /* nonblock mode is set or port is not enabled */ + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = true; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + spin_lock_irqsave(&info->lock, flags); + if (!tty_hung_up_p(filp)) { + extra_count = true; + port->count--; + } + spin_unlock_irqrestore(&info->lock, flags); + port->blocked_open++; + + while (1) { + if ((tty->termios->c_cflag & CBAUD)) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + cd = tty_port_carrier_raised(port); + + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd )) + break; + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); + tty_unlock(); + schedule(); + tty_lock(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + if (extra_count) + port->count++; + port->blocked_open--; + + if (!retval) + port->flags |= ASYNC_NORMAL_ACTIVE; + + DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); + return retval; +} + +static int alloc_tmp_rbuf(struct slgt_info *info) +{ + info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL); + if (info->tmp_rbuf == NULL) + return -ENOMEM; + return 0; +} + +static void free_tmp_rbuf(struct slgt_info *info) +{ + kfree(info->tmp_rbuf); + info->tmp_rbuf = NULL; +} + +/* + * allocate DMA descriptor lists. + */ +static int alloc_desc(struct slgt_info *info) +{ + unsigned int i; + unsigned int pbufs; + + /* allocate memory to hold descriptor lists */ + info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr); + if (info->bufs == NULL) + return -ENOMEM; + + memset(info->bufs, 0, DESC_LIST_SIZE); + + info->rbufs = (struct slgt_desc*)info->bufs; + info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count; + + pbufs = (unsigned int)info->bufs_dma_addr; + + /* + * Build circular lists of descriptors + */ + + for (i=0; i < info->rbuf_count; i++) { + /* physical address of this descriptor */ + info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc)); + + /* physical address of next descriptor */ + if (i == info->rbuf_count - 1) + info->rbufs[i].next = cpu_to_le32(pbufs); + else + info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc))); + set_desc_count(info->rbufs[i], DMABUFSIZE); + } + + for (i=0; i < info->tbuf_count; i++) { + /* physical address of this descriptor */ + info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc)); + + /* physical address of next descriptor */ + if (i == info->tbuf_count - 1) + info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc)); + else + info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc))); + } + + return 0; +} + +static void free_desc(struct slgt_info *info) +{ + if (info->bufs != NULL) { + pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr); + info->bufs = NULL; + info->rbufs = NULL; + info->tbufs = NULL; + } +} + +static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) +{ + int i; + for (i=0; i < count; i++) { + if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL) + return -ENOMEM; + bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr); + } + return 0; +} + +static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) +{ + int i; + for (i=0; i < count; i++) { + if (bufs[i].buf == NULL) + continue; + pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr); + bufs[i].buf = NULL; + } +} + +static int alloc_dma_bufs(struct slgt_info *info) +{ + info->rbuf_count = 32; + info->tbuf_count = 32; + + if (alloc_desc(info) < 0 || + alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 || + alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 || + alloc_tmp_rbuf(info) < 0) { + DBGERR(("%s DMA buffer alloc fail\n", info->device_name)); + return -ENOMEM; + } + reset_rbufs(info); + return 0; +} + +static void free_dma_bufs(struct slgt_info *info) +{ + if (info->bufs) { + free_bufs(info, info->rbufs, info->rbuf_count); + free_bufs(info, info->tbufs, info->tbuf_count); + free_desc(info); + } + free_tmp_rbuf(info); +} + +static int claim_resources(struct slgt_info *info) +{ + if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) { + DBGERR(("%s reg addr conflict, addr=%08X\n", + info->device_name, info->phys_reg_addr)); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->reg_addr_requested = true; + + info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE); + if (!info->reg_addr) { + DBGERR(("%s cant map device registers, addr=%08X\n", + info->device_name, info->phys_reg_addr)); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + return 0; + +errout: + release_resources(info); + return -ENODEV; +} + +static void release_resources(struct slgt_info *info) +{ + if (info->irq_requested) { + free_irq(info->irq_level, info); + info->irq_requested = false; + } + + if (info->reg_addr_requested) { + release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE); + info->reg_addr_requested = false; + } + + if (info->reg_addr) { + iounmap(info->reg_addr); + info->reg_addr = NULL; + } +} + +/* Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + */ +static void add_device(struct slgt_info *info) +{ + char *devstr; + + info->next_device = NULL; + info->line = slgt_device_count; + sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line); + + if (info->line < MAX_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + } + + slgt_device_count++; + + if (!slgt_device_list) + slgt_device_list = info; + else { + struct slgt_info *current_dev = slgt_device_list; + while(current_dev->next_device) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if (info->max_frame_size < 4096) + info->max_frame_size = 4096; + else if (info->max_frame_size > 65535) + info->max_frame_size = 65535; + + switch(info->pdev->device) { + case SYNCLINK_GT_DEVICE_ID: + devstr = "GT"; + break; + case SYNCLINK_GT2_DEVICE_ID: + devstr = "GT2"; + break; + case SYNCLINK_GT4_DEVICE_ID: + devstr = "GT4"; + break; + case SYNCLINK_AC_DEVICE_ID: + devstr = "AC"; + info->params.mode = MGSL_MODE_ASYNC; + break; + default: + devstr = "(unknown model)"; + } + printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n", + devstr, info->device_name, info->phys_reg_addr, + info->irq_level, info->max_frame_size); + +#if SYNCLINK_GENERIC_HDLC + hdlcdev_init(info); +#endif +} + +static const struct tty_port_operations slgt_port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, +}; + +/* + * allocate device instance structure, return NULL on failure + */ +static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) +{ + struct slgt_info *info; + + info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL); + + if (!info) { + DBGERR(("%s device alloc failed adapter=%d port=%d\n", + driver_name, adapter_num, port_num)); + } else { + tty_port_init(&info->port); + info->port.ops = &slgt_port_ops; + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, bh_handler); + info->max_frame_size = 4096; + info->base_clock = 14745600; + info->rbuf_fill_level = DMABUFSIZE; + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->adapter_num = adapter_num; + info->port_num = port_num; + + setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info); + setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info); + + /* Copy configuration info to device instance data */ + info->pdev = pdev; + info->irq_level = pdev->irq; + info->phys_reg_addr = pci_resource_start(pdev,0); + + info->bus_type = MGSL_BUS_TYPE_PCI; + info->irq_flags = IRQF_SHARED; + + info->init_error = -1; /* assume error, set to 0 on successful init */ + } + + return info; +} + +static void device_init(int adapter_num, struct pci_dev *pdev) +{ + struct slgt_info *port_array[SLGT_MAX_PORTS]; + int i; + int port_count = 1; + + if (pdev->device == SYNCLINK_GT2_DEVICE_ID) + port_count = 2; + else if (pdev->device == SYNCLINK_GT4_DEVICE_ID) + port_count = 4; + + /* allocate device instances for all ports */ + for (i=0; i < port_count; ++i) { + port_array[i] = alloc_dev(adapter_num, i, pdev); + if (port_array[i] == NULL) { + for (--i; i >= 0; --i) + kfree(port_array[i]); + return; + } + } + + /* give copy of port_array to all ports and add to device list */ + for (i=0; i < port_count; ++i) { + memcpy(port_array[i]->port_array, port_array, sizeof(port_array)); + add_device(port_array[i]); + port_array[i]->port_count = port_count; + spin_lock_init(&port_array[i]->lock); + } + + /* Allocate and claim adapter resources */ + if (!claim_resources(port_array[0])) { + + alloc_dma_bufs(port_array[0]); + + /* copy resource information from first port to others */ + for (i = 1; i < port_count; ++i) { + port_array[i]->irq_level = port_array[0]->irq_level; + port_array[i]->reg_addr = port_array[0]->reg_addr; + alloc_dma_bufs(port_array[i]); + } + + if (request_irq(port_array[0]->irq_level, + slgt_interrupt, + port_array[0]->irq_flags, + port_array[0]->device_name, + port_array[0]) < 0) { + DBGERR(("%s request_irq failed IRQ=%d\n", + port_array[0]->device_name, + port_array[0]->irq_level)); + } else { + port_array[0]->irq_requested = true; + adapter_test(port_array[0]); + for (i=1 ; i < port_count ; i++) { + port_array[i]->init_error = port_array[0]->init_error; + port_array[i]->gpio_present = port_array[0]->gpio_present; + } + } + } + + for (i=0; i < port_count; ++i) + tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev)); +} + +static int __devinit init_one(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + pci_set_master(dev); + device_init(slgt_device_count, dev); + return 0; +} + +static void __devexit remove_one(struct pci_dev *dev) +{ +} + +static const struct tty_operations ops = { + .open = open, + .close = close, + .write = write, + .put_char = put_char, + .flush_chars = flush_chars, + .write_room = write_room, + .chars_in_buffer = chars_in_buffer, + .flush_buffer = flush_buffer, + .ioctl = ioctl, + .compat_ioctl = slgt_compat_ioctl, + .throttle = throttle, + .unthrottle = unthrottle, + .send_xchar = send_xchar, + .break_ctl = set_break, + .wait_until_sent = wait_until_sent, + .set_termios = set_termios, + .stop = tx_hold, + .start = tx_release, + .hangup = hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, + .get_icount = get_icount, + .proc_fops = &synclink_gt_proc_fops, +}; + +static void slgt_cleanup(void) +{ + int rc; + struct slgt_info *info; + struct slgt_info *tmp; + + printk(KERN_INFO "unload %s\n", driver_name); + + if (serial_driver) { + for (info=slgt_device_list ; info != NULL ; info=info->next_device) + tty_unregister_device(serial_driver, info->line); + if ((rc = tty_unregister_driver(serial_driver))) + DBGERR(("tty_unregister_driver error=%d\n", rc)); + put_tty_driver(serial_driver); + } + + /* reset devices */ + info = slgt_device_list; + while(info) { + reset_port(info); + info = info->next_device; + } + + /* release devices */ + info = slgt_device_list; + while(info) { +#if SYNCLINK_GENERIC_HDLC + hdlcdev_exit(info); +#endif + free_dma_bufs(info); + free_tmp_rbuf(info); + if (info->port_num == 0) + release_resources(info); + tmp = info; + info = info->next_device; + kfree(tmp); + } + + if (pci_registered) + pci_unregister_driver(&pci_driver); +} + +/* + * Driver initialization entry point. + */ +static int __init slgt_init(void) +{ + int rc; + + printk(KERN_INFO "%s\n", driver_name); + + serial_driver = alloc_tty_driver(MAX_DEVICES); + if (!serial_driver) { + printk("%s can't allocate tty driver\n", driver_name); + return -ENOMEM; + } + + /* Initialize the tty_driver structure */ + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = tty_driver_name; + serial_driver->name = tty_dev_prefix; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->init_termios.c_ispeed = 9600; + serial_driver->init_termios.c_ospeed = 9600; + serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(serial_driver, &ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + DBGERR(("%s can't register serial driver\n", driver_name)); + put_tty_driver(serial_driver); + serial_driver = NULL; + goto error; + } + + printk(KERN_INFO "%s, tty major#%d\n", + driver_name, serial_driver->major); + + slgt_device_count = 0; + if ((rc = pci_register_driver(&pci_driver)) < 0) { + printk("%s pci_register_driver error=%d\n", driver_name, rc); + goto error; + } + pci_registered = true; + + if (!slgt_device_list) + printk("%s no devices found\n",driver_name); + + return 0; + +error: + slgt_cleanup(); + return rc; +} + +static void __exit slgt_exit(void) +{ + slgt_cleanup(); +} + +module_init(slgt_init); +module_exit(slgt_exit); + +/* + * register access routines + */ + +#define CALC_REGADDR() \ + unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \ + if (addr >= 0x80) \ + reg_addr += (info->port_num) * 32; \ + else if (addr >= 0x40) \ + reg_addr += (info->port_num) * 16; + +static __u8 rd_reg8(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readb((void __iomem *)reg_addr); +} + +static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value) +{ + CALC_REGADDR(); + writeb(value, (void __iomem *)reg_addr); +} + +static __u16 rd_reg16(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readw((void __iomem *)reg_addr); +} + +static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value) +{ + CALC_REGADDR(); + writew(value, (void __iomem *)reg_addr); +} + +static __u32 rd_reg32(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readl((void __iomem *)reg_addr); +} + +static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value) +{ + CALC_REGADDR(); + writel(value, (void __iomem *)reg_addr); +} + +static void rdma_reset(struct slgt_info *info) +{ + unsigned int i; + + /* set reset bit */ + wr_reg32(info, RDCSR, BIT1); + + /* wait for enable bit cleared */ + for(i=0 ; i < 1000 ; i++) + if (!(rd_reg32(info, RDCSR) & BIT0)) + break; +} + +static void tdma_reset(struct slgt_info *info) +{ + unsigned int i; + + /* set reset bit */ + wr_reg32(info, TDCSR, BIT1); + + /* wait for enable bit cleared */ + for(i=0 ; i < 1000 ; i++) + if (!(rd_reg32(info, TDCSR) & BIT0)) + break; +} + +/* + * enable internal loopback + * TxCLK and RxCLK are generated from BRG + * and TxD is looped back to RxD internally. + */ +static void enable_loopback(struct slgt_info *info) +{ + /* SCR (serial control) BIT2=looopback enable */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* CCR (clock control) + * 07..05 tx clock source (010 = BRG) + * 04..02 rx clock source (010 = BRG) + * 01 auxclk enable (0 = disable) + * 00 BRG enable (1 = enable) + * + * 0100 1001 + */ + wr_reg8(info, CCR, 0x49); + + /* set speed if available, otherwise use default */ + if (info->params.clock_speed) + set_rate(info, info->params.clock_speed); + else + set_rate(info, 3686400); + } +} + +/* + * set baud rate generator to specified rate + */ +static void set_rate(struct slgt_info *info, u32 rate) +{ + unsigned int div; + unsigned int osc = info->base_clock; + + /* div = osc/rate - 1 + * + * Round div up if osc/rate is not integer to + * force to next slowest rate. + */ + + if (rate) { + div = osc/rate; + if (!(osc % rate) && div) + div--; + wr_reg16(info, BDR, (unsigned short)div); + } +} + +static void rx_stop(struct slgt_info *info) +{ + unsigned short val; + + /* disable and reset receiver */ + val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, RCR, val); /* clear reset bit */ + + slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE); + + /* clear pending rx interrupts */ + wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER); + + rdma_reset(info); + + info->rx_enabled = false; + info->rx_restart = false; +} + +static void rx_start(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA); + + /* clear pending rx overrun IRQ */ + wr_reg16(info, SSR, IRQ_RXOVER); + + /* reset and disable receiver */ + val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, RCR, val); /* clear reset bit */ + + rdma_reset(info); + reset_rbufs(info); + + if (info->rx_pio) { + /* rx request when rx FIFO not empty */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); + slgt_irq_on(info, IRQ_RXDATA); + if (info->params.mode == MGSL_MODE_ASYNC) { + /* enable saving of rx status */ + wr_reg32(info, RDCSR, BIT6); + } + } else { + /* rx request when rx FIFO half full */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); + /* set 1st descriptor address */ + wr_reg32(info, RDDAR, info->rbufs[0].pdesc); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* enable rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT2 + BIT0)); + } else { + /* enable saving of rx status, rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + } + } + + slgt_irq_on(info, IRQ_RXOVER); + + /* enable receiver */ + wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1)); + + info->rx_restart = false; + info->rx_enabled = true; +} + +static void tx_start(struct slgt_info *info) +{ + if (!info->tx_enabled) { + wr_reg16(info, TCR, + (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2)); + info->tx_enabled = true; + } + + if (desc_count(info->tbufs[info->tbuf_start])) { + info->drop_rts_on_tx_done = false; + + if (info->params.mode != MGSL_MODE_ASYNC) { + if (info->params.flags & HDLC_FLAG_AUTO_RTS) { + get_signals(info); + if (!(info->signals & SerialSignal_RTS)) { + info->signals |= SerialSignal_RTS; + set_signals(info); + info->drop_rts_on_tx_done = true; + } + } + + slgt_irq_off(info, IRQ_TXDATA); + slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE); + /* clear tx idle and underrun status bits */ + wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); + } else { + slgt_irq_off(info, IRQ_TXDATA); + slgt_irq_on(info, IRQ_TXIDLE); + /* clear tx idle status bit */ + wr_reg16(info, SSR, IRQ_TXIDLE); + } + /* set 1st descriptor address and start DMA */ + wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); + wr_reg32(info, TDCSR, BIT2 + BIT0); + info->tx_active = true; + } +} + +static void tx_stop(struct slgt_info *info) +{ + unsigned short val; + + del_timer(&info->tx_timer); + + tdma_reset(info); + + /* reset and disable transmitter */ + val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ + + slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); + + /* clear tx idle and underrun status bit */ + wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); + + reset_tbufs(info); + + info->tx_enabled = false; + info->tx_active = false; +} + +static void reset_port(struct slgt_info *info) +{ + if (!info->reg_addr) + return; + + tx_stop(info); + rx_stop(info); + + info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + set_signals(info); + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); +} + +static void reset_adapter(struct slgt_info *info) +{ + int i; + for (i=0; i < info->port_count; ++i) { + if (info->port_array[i]) + reset_port(info->port_array[i]); + } +} + +static void async_mode(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + tx_stop(info); + rx_stop(info); + + /* TCR (tx control) + * + * 15..13 mode, 010=async + * 12..10 encoding, 000=NRZ + * 09 parity enable + * 08 1=odd parity, 0=even parity + * 07 1=RTS driver control + * 06 1=break enable + * 05..04 character length + * 00=5 bits + * 01=6 bits + * 10=7 bits + * 11=8 bits + * 03 0=1 stop bit, 1=2 stop bits + * 02 reset + * 01 enable + * 00 auto-CTS enable + */ + val = 0x4000; + + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + + if (info->params.parity != ASYNC_PARITY_NONE) { + val |= BIT9; + if (info->params.parity == ASYNC_PARITY_ODD) + val |= BIT8; + } + + switch (info->params.data_bits) + { + case 6: val |= BIT4; break; + case 7: val |= BIT5; break; + case 8: val |= BIT5 + BIT4; break; + } + + if (info->params.stop_bits != 1) + val |= BIT3; + + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + val |= BIT0; + + wr_reg16(info, TCR, val); + + /* RCR (rx control) + * + * 15..13 mode, 010=async + * 12..10 encoding, 000=NRZ + * 09 parity enable + * 08 1=odd parity, 0=even parity + * 07..06 reserved, must be 0 + * 05..04 character length + * 00=5 bits + * 01=6 bits + * 10=7 bits + * 11=8 bits + * 03 reserved, must be zero + * 02 reset + * 01 enable + * 00 auto-DCD enable + */ + val = 0x4000; + + if (info->params.parity != ASYNC_PARITY_NONE) { + val |= BIT9; + if (info->params.parity == ASYNC_PARITY_ODD) + val |= BIT8; + } + + switch (info->params.data_bits) + { + case 6: val |= BIT4; break; + case 7: val |= BIT5; break; + case 8: val |= BIT5 + BIT4; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + val |= BIT0; + + wr_reg16(info, RCR, val); + + /* CCR (clock control) + * + * 07..05 011 = tx clock source is BRG/16 + * 04..02 010 = rx clock source is BRG + * 01 0 = auxclk disabled + * 00 1 = BRG enabled + * + * 0110 1001 + */ + wr_reg8(info, CCR, 0x69); + + msc_set_vcr(info); + + /* SCR (serial control) + * + * 15 1=tx req on FIFO half empty + * 14 1=rx req on FIFO half full + * 13 tx data IRQ enable + * 12 tx idle IRQ enable + * 11 rx break on IRQ enable + * 10 rx data IRQ enable + * 09 rx break off IRQ enable + * 08 overrun IRQ enable + * 07 DSR IRQ enable + * 06 CTS IRQ enable + * 05 DCD IRQ enable + * 04 RI IRQ enable + * 03 0=16x sampling, 1=8x sampling + * 02 1=txd->rxd internal loopback enable + * 01 reserved, must be zero + * 00 1=master IRQ enable + */ + val = BIT15 + BIT14 + BIT0; + /* JCR[8] : 1 = x8 async mode feature available */ + if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate && + ((info->base_clock < (info->params.data_rate * 16)) || + (info->base_clock % (info->params.data_rate * 16)))) { + /* use 8x sampling */ + val |= BIT3; + set_rate(info, info->params.data_rate * 8); + } else { + /* use 16x sampling */ + set_rate(info, info->params.data_rate * 16); + } + wr_reg16(info, SCR, val); + + slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER); + + if (info->params.loopback) + enable_loopback(info); +} + +static void sync_mode(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + tx_stop(info); + rx_stop(info); + + /* TCR (tx control) + * + * 15..13 mode + * 000=HDLC/SDLC + * 001=raw bit synchronous + * 010=asynchronous/isochronous + * 011=monosync byte synchronous + * 100=bisync byte synchronous + * 101=xsync byte synchronous + * 12..10 encoding + * 09 CRC enable + * 08 CRC32 + * 07 1=RTS driver control + * 06 preamble enable + * 05..04 preamble length + * 03 share open/close flag + * 02 reset + * 01 enable + * 00 auto-CTS enable + */ + val = BIT2; + + switch(info->params.mode) { + case MGSL_MODE_XSYNC: + val |= BIT15 + BIT13; + break; + case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; + case MGSL_MODE_BISYNC: val |= BIT15; break; + case MGSL_MODE_RAW: val |= BIT13; break; + } + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + + switch(info->params.encoding) + { + case HDLC_ENCODING_NRZB: val |= BIT10; break; + case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; + case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; + case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; + case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; + case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; + } + + switch (info->params.crc_type & HDLC_CRC_MASK) + { + case HDLC_CRC_16_CCITT: val |= BIT9; break; + case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; + } + + if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) + val |= BIT6; + + switch (info->params.preamble_length) + { + case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break; + case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break; + case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + val |= BIT0; + + wr_reg16(info, TCR, val); + + /* TPR (transmit preamble) */ + + switch (info->params.preamble) + { + case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; + case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; + case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break; + case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break; + case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break; + default: val = 0x7e; break; + } + wr_reg8(info, TPR, (unsigned char)val); + + /* RCR (rx control) + * + * 15..13 mode + * 000=HDLC/SDLC + * 001=raw bit synchronous + * 010=asynchronous/isochronous + * 011=monosync byte synchronous + * 100=bisync byte synchronous + * 101=xsync byte synchronous + * 12..10 encoding + * 09 CRC enable + * 08 CRC32 + * 07..03 reserved, must be 0 + * 02 reset + * 01 enable + * 00 auto-DCD enable + */ + val = 0; + + switch(info->params.mode) { + case MGSL_MODE_XSYNC: + val |= BIT15 + BIT13; + break; + case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; + case MGSL_MODE_BISYNC: val |= BIT15; break; + case MGSL_MODE_RAW: val |= BIT13; break; + } + + switch(info->params.encoding) + { + case HDLC_ENCODING_NRZB: val |= BIT10; break; + case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; + case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; + case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; + case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; + case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; + } + + switch (info->params.crc_type & HDLC_CRC_MASK) + { + case HDLC_CRC_16_CCITT: val |= BIT9; break; + case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + val |= BIT0; + + wr_reg16(info, RCR, val); + + /* CCR (clock control) + * + * 07..05 tx clock source + * 04..02 rx clock source + * 01 auxclk enable + * 00 BRG enable + */ + val = 0; + + if (info->params.flags & HDLC_FLAG_TXC_BRG) + { + // when RxC source is DPLL, BRG generates 16X DPLL + // reference clock, so take TxC from BRG/16 to get + // transmit clock at actual data rate + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */ + else + val |= BIT6; /* 010, txclk = BRG */ + } + else if (info->params.flags & HDLC_FLAG_TXC_DPLL) + val |= BIT7; /* 100, txclk = DPLL Input */ + else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN) + val |= BIT5; /* 001, txclk = RXC Input */ + + if (info->params.flags & HDLC_FLAG_RXC_BRG) + val |= BIT3; /* 010, rxclk = BRG */ + else if (info->params.flags & HDLC_FLAG_RXC_DPLL) + val |= BIT4; /* 100, rxclk = DPLL */ + else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN) + val |= BIT2; /* 001, rxclk = TXC Input */ + + if (info->params.clock_speed) + val |= BIT1 + BIT0; + + wr_reg8(info, CCR, (unsigned char)val); + + if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL)) + { + // program DPLL mode + switch(info->params.encoding) + { + case HDLC_ENCODING_BIPHASE_MARK: + case HDLC_ENCODING_BIPHASE_SPACE: + val = BIT7; break; + case HDLC_ENCODING_BIPHASE_LEVEL: + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: + val = BIT7 + BIT6; break; + default: val = BIT6; // NRZ encodings + } + wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val)); + + // DPLL requires a 16X reference clock from BRG + set_rate(info, info->params.clock_speed * 16); + } + else + set_rate(info, info->params.clock_speed); + + tx_set_idle(info); + + msc_set_vcr(info); + + /* SCR (serial control) + * + * 15 1=tx req on FIFO half empty + * 14 1=rx req on FIFO half full + * 13 tx data IRQ enable + * 12 tx idle IRQ enable + * 11 underrun IRQ enable + * 10 rx data IRQ enable + * 09 rx idle IRQ enable + * 08 overrun IRQ enable + * 07 DSR IRQ enable + * 06 CTS IRQ enable + * 05 DCD IRQ enable + * 04 RI IRQ enable + * 03 reserved, must be zero + * 02 1=txd->rxd internal loopback enable + * 01 reserved, must be zero + * 00 1=master IRQ enable + */ + wr_reg16(info, SCR, BIT15 + BIT14 + BIT0); + + if (info->params.loopback) + enable_loopback(info); +} + +/* + * set transmit idle mode + */ +static void tx_set_idle(struct slgt_info *info) +{ + unsigned char val; + unsigned short tcr; + + /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits + * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits + */ + tcr = rd_reg16(info, TCR); + if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) { + /* disable preamble, set idle size to 16 bits */ + tcr = (tcr & ~(BIT6 + BIT5)) | BIT4; + /* MSB of 16 bit idle specified in tx preamble register (TPR) */ + wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff)); + } else if (!(tcr & BIT6)) { + /* preamble is disabled, set idle size to 8 bits */ + tcr &= ~(BIT5 + BIT4); + } + wr_reg16(info, TCR, tcr); + + if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) { + /* LSB of custom tx idle specified in tx idle register */ + val = (unsigned char)(info->idle_mode & 0xff); + } else { + /* standard 8 bit idle patterns */ + switch(info->idle_mode) + { + case HDLC_TXIDLE_FLAGS: val = 0x7e; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: + case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break; + case HDLC_TXIDLE_ZEROS: + case HDLC_TXIDLE_SPACE: val = 0x00; break; + default: val = 0xff; + } + } + + wr_reg8(info, TIR, val); +} + +/* + * get state of V24 status (input) signals + */ +static void get_signals(struct slgt_info *info) +{ + unsigned short status = rd_reg16(info, SSR); + + /* clear all serial signals except DTR and RTS */ + info->signals &= SerialSignal_DTR + SerialSignal_RTS; + + if (status & BIT3) + info->signals |= SerialSignal_DSR; + if (status & BIT2) + info->signals |= SerialSignal_CTS; + if (status & BIT1) + info->signals |= SerialSignal_DCD; + if (status & BIT0) + info->signals |= SerialSignal_RI; +} + +/* + * set V.24 Control Register based on current configuration + */ +static void msc_set_vcr(struct slgt_info *info) +{ + unsigned char val = 0; + + /* VCR (V.24 control) + * + * 07..04 serial IF select + * 03 DTR + * 02 RTS + * 01 LL + * 00 RL + */ + + switch(info->if_mode & MGSL_INTERFACE_MASK) + { + case MGSL_INTERFACE_RS232: + val |= BIT5; /* 0010 */ + break; + case MGSL_INTERFACE_V35: + val |= BIT7 + BIT6 + BIT5; /* 1110 */ + break; + case MGSL_INTERFACE_RS422: + val |= BIT6; /* 0100 */ + break; + } + + if (info->if_mode & MGSL_INTERFACE_MSB_FIRST) + val |= BIT4; + if (info->signals & SerialSignal_DTR) + val |= BIT3; + if (info->signals & SerialSignal_RTS) + val |= BIT2; + if (info->if_mode & MGSL_INTERFACE_LL) + val |= BIT1; + if (info->if_mode & MGSL_INTERFACE_RL) + val |= BIT0; + wr_reg8(info, VCR, val); +} + +/* + * set state of V24 control (output) signals + */ +static void set_signals(struct slgt_info *info) +{ + unsigned char val = rd_reg8(info, VCR); + if (info->signals & SerialSignal_DTR) + val |= BIT3; + else + val &= ~BIT3; + if (info->signals & SerialSignal_RTS) + val |= BIT2; + else + val &= ~BIT2; + wr_reg8(info, VCR, val); +} + +/* + * free range of receive DMA buffers (i to last) + */ +static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last) +{ + int done = 0; + + while(!done) { + /* reset current buffer for reuse */ + info->rbufs[i].status = 0; + set_desc_count(info->rbufs[i], info->rbuf_fill_level); + if (i == last) + done = 1; + if (++i == info->rbuf_count) + i = 0; + } + info->rbuf_current = i; +} + +/* + * mark all receive DMA buffers as free + */ +static void reset_rbufs(struct slgt_info *info) +{ + free_rbufs(info, 0, info->rbuf_count - 1); + info->rbuf_fill_index = 0; + info->rbuf_fill_count = 0; +} + +/* + * pass receive HDLC frame to upper layer + * + * return true if frame available, otherwise false + */ +static bool rx_get_frame(struct slgt_info *info) +{ + unsigned int start, end; + unsigned short status; + unsigned int framesize = 0; + unsigned long flags; + struct tty_struct *tty = info->port.tty; + unsigned char addr_field = 0xff; + unsigned int crc_size = 0; + + switch (info->params.crc_type & HDLC_CRC_MASK) { + case HDLC_CRC_16_CCITT: crc_size = 2; break; + case HDLC_CRC_32_CCITT: crc_size = 4; break; + } + +check_again: + + framesize = 0; + addr_field = 0xff; + start = end = info->rbuf_current; + + for (;;) { + if (!desc_complete(info->rbufs[end])) + goto cleanup; + + if (framesize == 0 && info->params.addr_filter != 0xff) + addr_field = info->rbufs[end].buf[0]; + + framesize += desc_count(info->rbufs[end]); + + if (desc_eof(info->rbufs[end])) + break; + + if (++end == info->rbuf_count) + end = 0; + + if (end == info->rbuf_current) { + if (info->rx_enabled){ + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + goto cleanup; + } + } + + /* status + * + * 15 buffer complete + * 14..06 reserved + * 05..04 residue + * 02 eof (end of frame) + * 01 CRC error + * 00 abort + */ + status = desc_status(info->rbufs[end]); + + /* ignore CRC bit if not using CRC (bit is undefined) */ + if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE) + status &= ~BIT1; + + if (framesize == 0 || + (addr_field != 0xff && addr_field != info->params.addr_filter)) { + free_rbufs(info, start, end); + goto check_again; + } + + if (framesize < (2 + crc_size) || status & BIT0) { + info->icount.rxshort++; + framesize = 0; + } else if (status & BIT1) { + info->icount.rxcrc++; + if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) + framesize = 0; + } + +#if SYNCLINK_GENERIC_HDLC + if (framesize == 0) { + info->netdev->stats.rx_errors++; + info->netdev->stats.rx_frame_errors++; + } +#endif + + DBGBH(("%s rx frame status=%04X size=%d\n", + info->device_name, status, framesize)); + DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx"); + + if (framesize) { + if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) { + framesize -= crc_size; + crc_size = 0; + } + + if (framesize > info->max_frame_size + crc_size) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous temp buffer */ + int copy_count = framesize; + int i = start; + unsigned char *p = info->tmp_rbuf; + info->tmp_rbuf_count = framesize; + + info->icount.rxok++; + + while(copy_count) { + int partial_count = min_t(int, copy_count, info->rbuf_fill_level); + memcpy(p, info->rbufs[i].buf, partial_count); + p += partial_count; + copy_count -= partial_count; + if (++i == info->rbuf_count) + i = 0; + } + + if (info->params.crc_type & HDLC_CRC_RETURN_EX) { + *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK; + framesize++; + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_rx(info,info->tmp_rbuf, framesize); + else +#endif + ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize); + } + } + free_rbufs(info, start, end); + return true; + +cleanup: + return false; +} + +/* + * pass receive buffer (RAW synchronous mode) to tty layer + * return true if buffer available, otherwise false + */ +static bool rx_get_buf(struct slgt_info *info) +{ + unsigned int i = info->rbuf_current; + unsigned int count; + + if (!desc_complete(info->rbufs[i])) + return false; + count = desc_count(info->rbufs[i]); + switch(info->params.mode) { + case MGSL_MODE_MONOSYNC: + case MGSL_MODE_BISYNC: + case MGSL_MODE_XSYNC: + /* ignore residue in byte synchronous modes */ + if (desc_residue(info->rbufs[i])) + count--; + break; + } + DBGDATA(info, info->rbufs[i].buf, count, "rx"); + DBGINFO(("rx_get_buf size=%d\n", count)); + if (count) + ldisc_receive_buf(info->port.tty, info->rbufs[i].buf, + info->flag_buf, count); + free_rbufs(info, i, i); + return true; +} + +static void reset_tbufs(struct slgt_info *info) +{ + unsigned int i; + info->tbuf_current = 0; + for (i=0 ; i < info->tbuf_count ; i++) { + info->tbufs[i].status = 0; + info->tbufs[i].count = 0; + } +} + +/* + * return number of free transmit DMA buffers + */ +static unsigned int free_tbuf_count(struct slgt_info *info) +{ + unsigned int count = 0; + unsigned int i = info->tbuf_current; + + do + { + if (desc_count(info->tbufs[i])) + break; /* buffer in use */ + ++count; + if (++i == info->tbuf_count) + i=0; + } while (i != info->tbuf_current); + + /* if tx DMA active, last zero count buffer is in use */ + if (count && (rd_reg32(info, TDCSR) & BIT0)) + --count; + + return count; +} + +/* + * return number of bytes in unsent transmit DMA buffers + * and the serial controller tx FIFO + */ +static unsigned int tbuf_bytes(struct slgt_info *info) +{ + unsigned int total_count = 0; + unsigned int i = info->tbuf_current; + unsigned int reg_value; + unsigned int count; + unsigned int active_buf_count = 0; + + /* + * Add descriptor counts for all tx DMA buffers. + * If count is zero (cleared by DMA controller after read), + * the buffer is complete or is actively being read from. + * + * Record buf_count of last buffer with zero count starting + * from current ring position. buf_count is mirror + * copy of count and is not cleared by serial controller. + * If DMA controller is active, that buffer is actively + * being read so add to total. + */ + do { + count = desc_count(info->tbufs[i]); + if (count) + total_count += count; + else if (!total_count) + active_buf_count = info->tbufs[i].buf_count; + if (++i == info->tbuf_count) + i = 0; + } while (i != info->tbuf_current); + + /* read tx DMA status register */ + reg_value = rd_reg32(info, TDCSR); + + /* if tx DMA active, last zero count buffer is in use */ + if (reg_value & BIT0) + total_count += active_buf_count; + + /* add tx FIFO count = reg_value[15..8] */ + total_count += (reg_value >> 8) & 0xff; + + /* if transmitter active add one byte for shift register */ + if (info->tx_active) + total_count++; + + return total_count; +} + +/* + * load data into transmit DMA buffer ring and start transmitter if needed + * return true if data accepted, otherwise false (buffers full) + */ +static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size) +{ + unsigned short count; + unsigned int i; + struct slgt_desc *d; + + /* check required buffer space */ + if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info)) + return false; + + DBGDATA(info, buf, size, "tx"); + + /* + * copy data to one or more DMA buffers in circular ring + * tbuf_start = first buffer for this data + * tbuf_current = next free buffer + * + * Copy all data before making data visible to DMA controller by + * setting descriptor count of the first buffer. + * This prevents an active DMA controller from reading the first DMA + * buffers of a frame and stopping before the final buffers are filled. + */ + + info->tbuf_start = i = info->tbuf_current; + + while (size) { + d = &info->tbufs[i]; + + count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size); + memcpy(d->buf, buf, count); + + size -= count; + buf += count; + + /* + * set EOF bit for last buffer of HDLC frame or + * for every buffer in raw mode + */ + if ((!size && info->params.mode == MGSL_MODE_HDLC) || + info->params.mode == MGSL_MODE_RAW) + set_desc_eof(*d, 1); + else + set_desc_eof(*d, 0); + + /* set descriptor count for all but first buffer */ + if (i != info->tbuf_start) + set_desc_count(*d, count); + d->buf_count = count; + + if (++i == info->tbuf_count) + i = 0; + } + + info->tbuf_current = i; + + /* set first buffer count to make new data visible to DMA controller */ + d = &info->tbufs[info->tbuf_start]; + set_desc_count(*d, d->buf_count); + + /* start transmitter if needed and update transmit timeout */ + if (!info->tx_active) + tx_start(info); + update_tx_timer(info); + + return true; +} + +static int register_test(struct slgt_info *info) +{ + static unsigned short patterns[] = + {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; + static unsigned int count = ARRAY_SIZE(patterns); + unsigned int i; + int rc = 0; + + for (i=0 ; i < count ; i++) { + wr_reg16(info, TIR, patterns[i]); + wr_reg16(info, BDR, patterns[(i+1)%count]); + if ((rd_reg16(info, TIR) != patterns[i]) || + (rd_reg16(info, BDR) != patterns[(i+1)%count])) { + rc = -ENODEV; + break; + } + } + info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0; + info->init_error = rc ? 0 : DiagStatus_AddressFailure; + return rc; +} + +static int irq_test(struct slgt_info *info) +{ + unsigned long timeout; + unsigned long flags; + struct tty_struct *oldtty = info->port.tty; + u32 speed = info->params.data_rate; + + info->params.data_rate = 921600; + info->port.tty = NULL; + + spin_lock_irqsave(&info->lock, flags); + async_mode(info); + slgt_irq_on(info, IRQ_TXIDLE); + + /* enable transmitter */ + wr_reg16(info, TCR, + (unsigned short)(rd_reg16(info, TCR) | BIT1)); + + /* write one byte and wait for tx idle */ + wr_reg16(info, TDR, 0); + + /* assume failure */ + info->init_error = DiagStatus_IrqFailure; + info->irq_occurred = false; + + spin_unlock_irqrestore(&info->lock, flags); + + timeout=100; + while(timeout-- && !info->irq_occurred) + msleep_interruptible(10); + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->params.data_rate = speed; + info->port.tty = oldtty; + + info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure; + return info->irq_occurred ? 0 : -ENODEV; +} + +static int loopback_test_rx(struct slgt_info *info) +{ + unsigned char *src, *dest; + int count; + + if (desc_complete(info->rbufs[0])) { + count = desc_count(info->rbufs[0]); + src = info->rbufs[0].buf; + dest = info->tmp_rbuf; + + for( ; count ; count-=2, src+=2) { + /* src=data byte (src+1)=status byte */ + if (!(*(src+1) & (BIT9 + BIT8))) { + *dest = *src; + dest++; + info->tmp_rbuf_count++; + } + } + DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx"); + return 1; + } + return 0; +} + +static int loopback_test(struct slgt_info *info) +{ +#define TESTFRAMESIZE 20 + + unsigned long timeout; + u16 count = TESTFRAMESIZE; + unsigned char buf[TESTFRAMESIZE]; + int rc = -ENODEV; + unsigned long flags; + + struct tty_struct *oldtty = info->port.tty; + MGSL_PARAMS params; + + memcpy(¶ms, &info->params, sizeof(params)); + + info->params.mode = MGSL_MODE_ASYNC; + info->params.data_rate = 921600; + info->params.loopback = 1; + info->port.tty = NULL; + + /* build and send transmit frame */ + for (count = 0; count < TESTFRAMESIZE; ++count) + buf[count] = (unsigned char)count; + + info->tmp_rbuf_count = 0; + memset(info->tmp_rbuf, 0, TESTFRAMESIZE); + + /* program hardware for HDLC and enabled receiver */ + spin_lock_irqsave(&info->lock,flags); + async_mode(info); + rx_start(info); + tx_load(info, buf, count); + spin_unlock_irqrestore(&info->lock, flags); + + /* wait for receive complete */ + for (timeout = 100; timeout; --timeout) { + msleep_interruptible(10); + if (loopback_test_rx(info)) { + rc = 0; + break; + } + } + + /* verify received frame length and contents */ + if (!rc && (info->tmp_rbuf_count != count || + memcmp(buf, info->tmp_rbuf, count))) { + rc = -ENODEV; + } + + spin_lock_irqsave(&info->lock,flags); + reset_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + memcpy(&info->params, ¶ms, sizeof(info->params)); + info->port.tty = oldtty; + + info->init_error = rc ? DiagStatus_DmaFailure : 0; + return rc; +} + +static int adapter_test(struct slgt_info *info) +{ + DBGINFO(("testing %s\n", info->device_name)); + if (register_test(info) < 0) { + printk("register test failure %s addr=%08X\n", + info->device_name, info->phys_reg_addr); + } else if (irq_test(info) < 0) { + printk("IRQ test failure %s IRQ=%d\n", + info->device_name, info->irq_level); + } else if (loopback_test(info) < 0) { + printk("loopback test failure %s\n", info->device_name); + } + return info->init_error; +} + +/* + * transmit timeout handler + */ +static void tx_timeout(unsigned long context) +{ + struct slgt_info *info = (struct slgt_info*)context; + unsigned long flags; + + DBGINFO(("%s tx_timeout\n", info->device_name)); + if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + bh_transmit(info); +} + +/* + * receive buffer polling timer + */ +static void rx_timeout(unsigned long context) +{ + struct slgt_info *info = (struct slgt_info*)context; + unsigned long flags; + + DBGINFO(("%s rx_timeout\n", info->device_name)); + spin_lock_irqsave(&info->lock, flags); + info->pending_bh |= BH_RECEIVE; + spin_unlock_irqrestore(&info->lock, flags); + bh_handler(&info->task); +} + diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c new file mode 100644 index 000000000000..327343694473 --- /dev/null +++ b/drivers/tty/synclinkmp.c @@ -0,0 +1,5600 @@ +/* + * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $ + * + * Device driver for Microgate SyncLink Multiport + * high speed multiprotocol serial adapter. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * Derived from serial.c written by Theodore Ts'o and Linus Torvalds + * This code is released under the GNU General Public License (GPL) + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) +#if defined(__i386__) +# define BREAKPOINT() asm(" int $3"); +#else +# define BREAKPOINT() { } +#endif + +#define MAX_DEVICES 12 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE)) +#define SYNCLINK_GENERIC_HDLC 1 +#else +#define SYNCLINK_GENERIC_HDLC 0 +#endif + +#define GET_USER(error,value,addr) error = get_user(value,addr) +#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 +#define PUT_USER(error,value,addr) error = put_user(value,addr) +#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 + +#include + +static MGSL_PARAMS default_params = { + MGSL_MODE_HDLC, /* unsigned long mode */ + 0, /* unsigned char loopback; */ + HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ + HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ + 0, /* unsigned long clock_speed; */ + 0xff, /* unsigned char addr_filter; */ + HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ + HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ + HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ + 9600, /* unsigned long data_rate; */ + 8, /* unsigned char data_bits; */ + 1, /* unsigned char stop_bits; */ + ASYNC_PARITY_NONE /* unsigned char parity; */ +}; + +/* size in bytes of DMA data buffers */ +#define SCABUFSIZE 1024 +#define SCA_MEM_SIZE 0x40000 +#define SCA_BASE_SIZE 512 +#define SCA_REG_SIZE 16 +#define SCA_MAX_PORTS 4 +#define SCAMAXDESC 128 + +#define BUFFERLISTSIZE 4096 + +/* SCA-I style DMA buffer descriptor */ +typedef struct _SCADESC +{ + u16 next; /* lower l6 bits of next descriptor addr */ + u16 buf_ptr; /* lower 16 bits of buffer addr */ + u8 buf_base; /* upper 8 bits of buffer addr */ + u8 pad1; + u16 length; /* length of buffer */ + u8 status; /* status of buffer */ + u8 pad2; +} SCADESC, *PSCADESC; + +typedef struct _SCADESC_EX +{ + /* device driver bookkeeping section */ + char *virt_addr; /* virtual address of data buffer */ + u16 phys_entry; /* lower 16-bits of physical address of this descriptor */ +} SCADESC_EX, *PSCADESC_EX; + +/* The queue of BH actions to be performed */ + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 + +#define IO_PIN_SHUTDOWN_LIMIT 100 + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* + * Device instance data structure + */ +typedef struct _synclinkmp_info { + void *if_ptr; /* General purpose pointer (used by SPPP) */ + int magic; + struct tty_port port; + int line; + unsigned short close_delay; + unsigned short closing_wait; /* time to wait before closing */ + + struct mgsl_icount icount; + + int timeout; + int x_char; /* xon/xoff character */ + u16 read_status_mask1; /* break detection (SR1 indications) */ + u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */ + unsigned char ignore_status_mask1; /* break detection (SR1 indications) */ + unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */ + unsigned char *tx_buf; + int tx_put; + int tx_get; + int tx_count; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; /* HDLC transmit timeout timer */ + struct _synclinkmp_info *next_device; /* device list link */ + struct timer_list status_timer; /* input signal status check timer */ + + spinlock_t lock; /* spinlock for synchronizing with ISR */ + struct work_struct task; /* task structure for scheduling bh */ + + u32 max_frame_size; /* as set by device config */ + + u32 pending_bh; + + bool bh_running; /* Protection from multiple */ + int isr_overflow; + bool bh_requested; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *buffer_list; /* virtual address of Rx & Tx buffer lists */ + unsigned long buffer_list_phys; + + unsigned int rx_buf_count; /* count of total allocated Rx buffers */ + SCADESC *rx_buf_list; /* list of receive buffer entries */ + SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */ + unsigned int current_rx_buf; + + unsigned int tx_buf_count; /* count of total allocated Tx buffers */ + SCADESC *tx_buf_list; /* list of transmit buffer entries */ + SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */ + unsigned int last_tx_buf; + + unsigned char *tmp_rx_buf; + unsigned int tmp_rx_buf_count; + + bool rx_enabled; + bool rx_overflow; + + bool tx_enabled; + bool tx_active; + u32 idle_mode; + + unsigned char ie0_value; + unsigned char ie1_value; + unsigned char ie2_value; + unsigned char ctrlreg_value; + unsigned char old_signals; + + char device_name[25]; /* device instance name */ + + int port_count; + int adapter_num; + int port_num; + + struct _synclinkmp_info *port_array[SCA_MAX_PORTS]; + + unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ + + unsigned int irq_level; /* interrupt level */ + unsigned long irq_flags; + bool irq_requested; /* true if IRQ requested */ + + MGSL_PARAMS params; /* communications parameters */ + + unsigned char serial_signals; /* current serial signal states */ + + bool irq_occurred; /* for diagnostics use */ + unsigned int init_error; /* Initialization startup error */ + + u32 last_mem_alloc; + unsigned char* memory_base; /* shared memory address (PCI only) */ + u32 phys_memory_base; + int shared_mem_requested; + + unsigned char* sca_base; /* HD64570 SCA Memory address */ + u32 phys_sca_base; + u32 sca_offset; + bool sca_base_requested; + + unsigned char* lcr_base; /* local config registers (PCI only) */ + u32 phys_lcr_base; + u32 lcr_offset; + int lcr_mem_requested; + + unsigned char* statctrl_base; /* status/control register memory */ + u32 phys_statctrl_base; + u32 statctrl_offset; + bool sca_statctrl_requested; + + u32 misc_ctrl_value; + char flag_buf[MAX_ASYNC_BUFFER_SIZE]; + char char_buf[MAX_ASYNC_BUFFER_SIZE]; + bool drop_rts_on_tx_done; + + struct _input_signal_events input_signal_events; + + /* SPPP/Cisco HDLC device parts */ + int netcount; + spinlock_t netlock; + +#if SYNCLINK_GENERIC_HDLC + struct net_device *netdev; +#endif + +} SLMP_INFO; + +#define MGSL_MAGIC 0x5401 + +/* + * define serial signal status change macros + */ +#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */ +#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */ +#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */ +#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */ + +/* Common Register macros */ +#define LPR 0x00 +#define PABR0 0x02 +#define PABR1 0x03 +#define WCRL 0x04 +#define WCRM 0x05 +#define WCRH 0x06 +#define DPCR 0x08 +#define DMER 0x09 +#define ISR0 0x10 +#define ISR1 0x11 +#define ISR2 0x12 +#define IER0 0x14 +#define IER1 0x15 +#define IER2 0x16 +#define ITCR 0x18 +#define INTVR 0x1a +#define IMVR 0x1c + +/* MSCI Register macros */ +#define TRB 0x20 +#define TRBL 0x20 +#define TRBH 0x21 +#define SR0 0x22 +#define SR1 0x23 +#define SR2 0x24 +#define SR3 0x25 +#define FST 0x26 +#define IE0 0x28 +#define IE1 0x29 +#define IE2 0x2a +#define FIE 0x2b +#define CMD 0x2c +#define MD0 0x2e +#define MD1 0x2f +#define MD2 0x30 +#define CTL 0x31 +#define SA0 0x32 +#define SA1 0x33 +#define IDL 0x34 +#define TMC 0x35 +#define RXS 0x36 +#define TXS 0x37 +#define TRC0 0x38 +#define TRC1 0x39 +#define RRC 0x3a +#define CST0 0x3c +#define CST1 0x3d + +/* Timer Register Macros */ +#define TCNT 0x60 +#define TCNTL 0x60 +#define TCNTH 0x61 +#define TCONR 0x62 +#define TCONRL 0x62 +#define TCONRH 0x63 +#define TMCS 0x64 +#define TEPR 0x65 + +/* DMA Controller Register macros */ +#define DARL 0x80 +#define DARH 0x81 +#define DARB 0x82 +#define BAR 0x80 +#define BARL 0x80 +#define BARH 0x81 +#define BARB 0x82 +#define SAR 0x84 +#define SARL 0x84 +#define SARH 0x85 +#define SARB 0x86 +#define CPB 0x86 +#define CDA 0x88 +#define CDAL 0x88 +#define CDAH 0x89 +#define EDA 0x8a +#define EDAL 0x8a +#define EDAH 0x8b +#define BFL 0x8c +#define BFLL 0x8c +#define BFLH 0x8d +#define BCR 0x8e +#define BCRL 0x8e +#define BCRH 0x8f +#define DSR 0x90 +#define DMR 0x91 +#define FCT 0x93 +#define DIR 0x94 +#define DCMD 0x95 + +/* combine with timer or DMA register address */ +#define TIMER0 0x00 +#define TIMER1 0x08 +#define TIMER2 0x10 +#define TIMER3 0x18 +#define RXDMA 0x00 +#define TXDMA 0x20 + +/* SCA Command Codes */ +#define NOOP 0x00 +#define TXRESET 0x01 +#define TXENABLE 0x02 +#define TXDISABLE 0x03 +#define TXCRCINIT 0x04 +#define TXCRCEXCL 0x05 +#define TXEOM 0x06 +#define TXABORT 0x07 +#define MPON 0x08 +#define TXBUFCLR 0x09 +#define RXRESET 0x11 +#define RXENABLE 0x12 +#define RXDISABLE 0x13 +#define RXCRCINIT 0x14 +#define RXREJECT 0x15 +#define SEARCHMP 0x16 +#define RXCRCEXCL 0x17 +#define RXCRCCALC 0x18 +#define CHRESET 0x21 +#define HUNT 0x31 + +/* DMA command codes */ +#define SWABORT 0x01 +#define FEICLEAR 0x02 + +/* IE0 */ +#define TXINTE BIT7 +#define RXINTE BIT6 +#define TXRDYE BIT1 +#define RXRDYE BIT0 + +/* IE1 & SR1 */ +#define UDRN BIT7 +#define IDLE BIT6 +#define SYNCD BIT4 +#define FLGD BIT4 +#define CCTS BIT3 +#define CDCD BIT2 +#define BRKD BIT1 +#define ABTD BIT1 +#define GAPD BIT1 +#define BRKE BIT0 +#define IDLD BIT0 + +/* IE2 & SR2 */ +#define EOM BIT7 +#define PMP BIT6 +#define SHRT BIT6 +#define PE BIT5 +#define ABT BIT5 +#define FRME BIT4 +#define RBIT BIT4 +#define OVRN BIT3 +#define CRCE BIT2 + + +/* + * Global linked list of SyncLink devices + */ +static SLMP_INFO *synclinkmp_device_list = NULL; +static int synclinkmp_adapter_count = -1; +static int synclinkmp_device_count = 0; + +/* + * Set this param to non-zero to load eax with the + * .text section address and breakpoint on module load. + * This is useful for use with gdb and add-symbol-file command. + */ +static int break_on_load = 0; + +/* + * Driver major number, defaults to zero to get auto + * assigned major number. May be forced as module parameter. + */ +static int ttymajor = 0; + +/* + * Array of user specified options for ISA adapters. + */ +static int debug_level = 0; +static int maxframe[MAX_DEVICES] = {0,}; + +module_param(break_on_load, bool, 0); +module_param(ttymajor, int, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); + +static char *driver_name = "SyncLink MultiPort driver"; +static char *driver_version = "$Revision: 4.38 $"; + +static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent); +static void synclinkmp_remove_one(struct pci_dev *dev); + +static struct pci_device_id synclinkmp_pci_tbl[] = { + { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, }, + { 0, }, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl); + +MODULE_LICENSE("GPL"); + +static struct pci_driver synclinkmp_pci_driver = { + .name = "synclinkmp", + .id_table = synclinkmp_pci_tbl, + .probe = synclinkmp_init_one, + .remove = __devexit_p(synclinkmp_remove_one), +}; + + +static struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + + +/* tty callbacks */ + +static int open(struct tty_struct *tty, struct file * filp); +static void close(struct tty_struct *tty, struct file * filp); +static void hangup(struct tty_struct *tty); +static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); + +static int write(struct tty_struct *tty, const unsigned char *buf, int count); +static int put_char(struct tty_struct *tty, unsigned char ch); +static void send_xchar(struct tty_struct *tty, char ch); +static void wait_until_sent(struct tty_struct *tty, int timeout); +static int write_room(struct tty_struct *tty); +static void flush_chars(struct tty_struct *tty); +static void flush_buffer(struct tty_struct *tty); +static void tx_hold(struct tty_struct *tty); +static void tx_release(struct tty_struct *tty); + +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); +static int chars_in_buffer(struct tty_struct *tty); +static void throttle(struct tty_struct * tty); +static void unthrottle(struct tty_struct * tty); +static int set_break(struct tty_struct *tty, int break_state); + +#if SYNCLINK_GENERIC_HDLC +#define dev_to_port(D) (dev_to_hdlc(D)->priv) +static void hdlcdev_tx_done(SLMP_INFO *info); +static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size); +static int hdlcdev_init(SLMP_INFO *info); +static void hdlcdev_exit(SLMP_INFO *info); +#endif + +/* ioctl handlers */ + +static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount); +static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params); +static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params); +static int get_txidle(SLMP_INFO *info, int __user *idle_mode); +static int set_txidle(SLMP_INFO *info, int idle_mode); +static int tx_enable(SLMP_INFO *info, int enable); +static int tx_abort(SLMP_INFO *info); +static int rx_enable(SLMP_INFO *info, int enable); +static int modem_input_wait(SLMP_INFO *info,int arg); +static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int set_break(struct tty_struct *tty, int break_state); + +static void add_device(SLMP_INFO *info); +static void device_init(int adapter_num, struct pci_dev *pdev); +static int claim_resources(SLMP_INFO *info); +static void release_resources(SLMP_INFO *info); + +static int startup(SLMP_INFO *info); +static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); +static int carrier_raised(struct tty_port *port); +static void shutdown(SLMP_INFO *info); +static void program_hw(SLMP_INFO *info); +static void change_params(SLMP_INFO *info); + +static bool init_adapter(SLMP_INFO *info); +static bool register_test(SLMP_INFO *info); +static bool irq_test(SLMP_INFO *info); +static bool loopback_test(SLMP_INFO *info); +static int adapter_test(SLMP_INFO *info); +static bool memory_test(SLMP_INFO *info); + +static void reset_adapter(SLMP_INFO *info); +static void reset_port(SLMP_INFO *info); +static void async_mode(SLMP_INFO *info); +static void hdlc_mode(SLMP_INFO *info); + +static void rx_stop(SLMP_INFO *info); +static void rx_start(SLMP_INFO *info); +static void rx_reset_buffers(SLMP_INFO *info); +static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last); +static bool rx_get_frame(SLMP_INFO *info); + +static void tx_start(SLMP_INFO *info); +static void tx_stop(SLMP_INFO *info); +static void tx_load_fifo(SLMP_INFO *info); +static void tx_set_idle(SLMP_INFO *info); +static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count); + +static void get_signals(SLMP_INFO *info); +static void set_signals(SLMP_INFO *info); +static void enable_loopback(SLMP_INFO *info, int enable); +static void set_rate(SLMP_INFO *info, u32 data_rate); + +static int bh_action(SLMP_INFO *info); +static void bh_handler(struct work_struct *work); +static void bh_receive(SLMP_INFO *info); +static void bh_transmit(SLMP_INFO *info); +static void bh_status(SLMP_INFO *info); +static void isr_timer(SLMP_INFO *info); +static void isr_rxint(SLMP_INFO *info); +static void isr_rxrdy(SLMP_INFO *info); +static void isr_txint(SLMP_INFO *info); +static void isr_txrdy(SLMP_INFO *info); +static void isr_rxdmaok(SLMP_INFO *info); +static void isr_rxdmaerror(SLMP_INFO *info); +static void isr_txdmaok(SLMP_INFO *info); +static void isr_txdmaerror(SLMP_INFO *info); +static void isr_io_pin(SLMP_INFO *info, u16 status); + +static int alloc_dma_bufs(SLMP_INFO *info); +static void free_dma_bufs(SLMP_INFO *info); +static int alloc_buf_list(SLMP_INFO *info); +static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count); +static int alloc_tmp_rx_buf(SLMP_INFO *info); +static void free_tmp_rx_buf(SLMP_INFO *info); + +static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count); +static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit); +static void tx_timeout(unsigned long context); +static void status_timeout(unsigned long context); + +static unsigned char read_reg(SLMP_INFO *info, unsigned char addr); +static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val); +static u16 read_reg16(SLMP_INFO *info, unsigned char addr); +static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val); +static unsigned char read_status_reg(SLMP_INFO * info); +static void write_control_reg(SLMP_INFO * info); + + +static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes +static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes +static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes + +static u32 misc_ctrl_value = 0x007e4040; +static u32 lcr1_brdr_value = 0x00800028; + +static u32 read_ahead_count = 8; + +/* DPCR, DMA Priority Control + * + * 07..05 Not used, must be 0 + * 04 BRC, bus release condition: 0=all transfers complete + * 1=release after 1 xfer on all channels + * 03 CCC, channel change condition: 0=every cycle + * 1=after each channel completes all xfers + * 02..00 PR<2..0>, priority 100=round robin + * + * 00000100 = 0x00 + */ +static unsigned char dma_priority = 0x04; + +// Number of bytes that can be written to shared RAM +// in a single write operation +static u32 sca_pci_load_interval = 64; + +/* + * 1st function defined in .text section. Calling this function in + * init_module() followed by a breakpoint allows a remote debugger + * (gdb) to get the .text address for the add-symbol-file command. + * This allows remote debugging of dynamically loadable modules. + */ +static void* synclinkmp_get_text_ptr(void); +static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;} + +static inline int sanity_check(SLMP_INFO *info, + char *name, const char *routine) +{ +#ifdef SANITY_CHECK + static const char *badmagic = + "Warning: bad magic number for synclinkmp_struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null synclinkmp_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/** + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ + +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->receive_buf) + ld->ops->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* tty callbacks */ + +/* Called when a port is opened. Init and enable port. + */ +static int open(struct tty_struct *tty, struct file *filp) +{ + SLMP_INFO *info; + int retval, line; + unsigned long flags; + + line = tty->index; + if ((line < 0) || (line >= synclinkmp_device_count)) { + printk("%s(%d): open with invalid line #%d.\n", + __FILE__,__LINE__,line); + return -ENODEV; + } + + info = synclinkmp_device_list; + while(info && info->line != line) + info = info->next_device; + if (sanity_check(info, tty->name, "open")) + return -ENODEV; + if ( info->init_error ) { + printk("%s(%d):%s device is not allocated, init error=%d\n", + __FILE__,__LINE__,info->device_name,info->init_error); + return -ENODEV; + } + + tty->driver_data = info; + info->port.tty = tty; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s open(), old ref count = %d\n", + __FILE__,__LINE__,tty->driver->name, info->port.count); + + /* If port is closing, signal caller to try again */ + if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){ + if (info->port.flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->port.close_wait); + retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); + goto cleanup; + } + + info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + goto cleanup; + } + info->port.count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->port.count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) + goto cleanup; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() returned %d\n", + __FILE__,__LINE__, info->device_name, retval); + goto cleanup; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s open() success\n", + __FILE__,__LINE__, info->device_name); + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->port.tty = NULL; /* tty layer will release tty struct */ + if(info->port.count) + info->port.count--; + } + + return retval; +} + +/* Called when port is closed. Wait for remaining data to be + * sent. Disable port and free resources. + */ +static void close(struct tty_struct *tty, struct file *filp) +{ + SLMP_INFO * info = tty->driver_data; + + if (sanity_check(info, tty->name, "close")) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s close() entry, count=%d\n", + __FILE__,__LINE__, info->device_name, info->port.count); + + if (tty_port_close_start(&info->port, tty, filp) == 0) + goto cleanup; + + mutex_lock(&info->port.mutex); + if (info->port.flags & ASYNC_INITIALIZED) + wait_until_sent(tty, info->timeout); + + flush_buffer(tty); + tty_ldisc_flush(tty); + shutdown(info); + mutex_unlock(&info->port.mutex); + + tty_port_close_end(&info->port, tty); + info->port.tty = NULL; +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, + tty->driver->name, info->port.count); +} + +/* Called by tty_hangup() when a hangup is signaled. + * This is the same as closing all open descriptors for the port. + */ +static void hangup(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s hangup()\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "hangup")) + return; + + mutex_lock(&info->port.mutex); + flush_buffer(tty); + shutdown(info); + + spin_lock_irqsave(&info->port.lock, flags); + info->port.count = 0; + info->port.flags &= ~ASYNC_NORMAL_ACTIVE; + info->port.tty = NULL; + spin_unlock_irqrestore(&info->port.lock, flags); + mutex_unlock(&info->port.mutex); + + wake_up_interruptible(&info->port.open_wait); +} + +/* Set new termios settings + */ +static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__, + tty->driver->name ); + + change_params(info); + + /* Handle transition to B0 status */ + if (old_termios->c_cflag & CBAUD && + !(tty->termios->c_cflag & CBAUD)) { + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + tty->termios->c_cflag & CBAUD) { + info->serial_signals |= SerialSignal_DTR; + if (!(tty->termios->c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { + info->serial_signals |= SerialSignal_RTS; + } + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle turning off CRTSCTS */ + if (old_termios->c_cflag & CRTSCTS && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + tx_release(tty); + } +} + +/* Send a block of data + * + * Arguments: + * + * tty pointer to tty information structure + * buf pointer to buffer containing send data + * count size of send data in bytes + * + * Return Value: number of characters written + */ +static int write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s write() count=%d\n", + __FILE__,__LINE__,info->device_name,count); + + if (sanity_check(info, tty->name, "write")) + goto cleanup; + + if (!info->tx_buf) + goto cleanup; + + if (info->params.mode == MGSL_MODE_HDLC) { + if (count > info->max_frame_size) { + ret = -EIO; + goto cleanup; + } + if (info->tx_active) + goto cleanup; + if (info->tx_count) { + /* send accumulated data from send_char() calls */ + /* as frame and wait before accepting more data. */ + tx_load_dma_buffer(info, info->tx_buf, info->tx_count); + goto start; + } + ret = info->tx_count = count; + tx_load_dma_buffer(info, buf, count); + goto start; + } + + for (;;) { + c = min_t(int, count, + min(info->max_frame_size - info->tx_count - 1, + info->max_frame_size - info->tx_put)); + if (c <= 0) + break; + + memcpy(info->tx_buf + info->tx_put, buf, c); + + spin_lock_irqsave(&info->lock,flags); + info->tx_put += c; + if (info->tx_put >= info->max_frame_size) + info->tx_put -= info->max_frame_size; + info->tx_count += c; + spin_unlock_irqrestore(&info->lock,flags); + + buf += c; + count -= c; + ret += c; + } + + if (info->params.mode == MGSL_MODE_HDLC) { + if (count) { + ret = info->tx_count = 0; + goto cleanup; + } + tx_load_dma_buffer(info, info->tx_buf, info->tx_count); + } +start: + if (info->tx_count && !tty->stopped && !tty->hw_stopped) { + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk( "%s(%d):%s write() returning=%d\n", + __FILE__,__LINE__,info->device_name,ret); + return ret; +} + +/* Add a character to the transmit buffer. + */ +static int put_char(struct tty_struct *tty, unsigned char ch) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + int ret = 0; + + if ( debug_level >= DEBUG_LEVEL_INFO ) { + printk( "%s(%d):%s put_char(%d)\n", + __FILE__,__LINE__,info->device_name,ch); + } + + if (sanity_check(info, tty->name, "put_char")) + return 0; + + if (!info->tx_buf) + return 0; + + spin_lock_irqsave(&info->lock,flags); + + if ( (info->params.mode != MGSL_MODE_HDLC) || + !info->tx_active ) { + + if (info->tx_count < info->max_frame_size - 1) { + info->tx_buf[info->tx_put++] = ch; + if (info->tx_put >= info->max_frame_size) + info->tx_put -= info->max_frame_size; + info->tx_count++; + ret = 1; + } + } + + spin_unlock_irqrestore(&info->lock,flags); + return ret; +} + +/* Send a high-priority XON/XOFF character + */ +static void send_xchar(struct tty_struct *tty, char ch) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s send_xchar(%d)\n", + __FILE__,__LINE__, info->device_name, ch ); + + if (sanity_check(info, tty->name, "send_xchar")) + return; + + info->x_char = ch; + if (ch) { + /* Make sure transmit interrupts are on */ + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* Wait until the transmitter is empty. + */ +static void wait_until_sent(struct tty_struct *tty, int timeout) +{ + SLMP_INFO * info = tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_until_sent() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "wait_until_sent")) + return; + + if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if ( info->params.data_rate ) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + if ( info->params.mode == MGSL_MODE_HDLC ) { + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } else { + /* + * TODO: determine if there is something similar to USC16C32 + * TXSTATUS_ALL_SENT status + */ + while ( info->tx_active && info->tx_enabled) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } + +exit: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_until_sent() exit\n", + __FILE__,__LINE__, info->device_name ); +} + +/* Return the count of free bytes in transmit buffer + */ +static int write_room(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + int ret; + + if (sanity_check(info, tty->name, "write_room")) + return 0; + + if (info->params.mode == MGSL_MODE_HDLC) { + ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; + } else { + ret = info->max_frame_size - info->tx_count - 1; + if (ret < 0) + ret = 0; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s write_room()=%d\n", + __FILE__, __LINE__, info->device_name, ret); + + return ret; +} + +/* enable transmitter and send remaining buffered characters + */ +static void flush_chars(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s flush_chars() entry tx_count=%d\n", + __FILE__,__LINE__,info->device_name,info->tx_count); + + if (sanity_check(info, tty->name, "flush_chars")) + return; + + if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped || + !info->tx_buf) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s flush_chars() entry, starting transmitter\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->lock,flags); + + if (!info->tx_active) { + if ( (info->params.mode == MGSL_MODE_HDLC) && + info->tx_count ) { + /* operating in synchronous (frame oriented) mode */ + /* copy data from circular tx_buf to */ + /* transmit DMA buffer. */ + tx_load_dma_buffer(info, + info->tx_buf,info->tx_count); + } + tx_start(info); + } + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Discard all data in the send buffer + */ +static void flush_buffer(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s flush_buffer() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "flush_buffer")) + return; + + spin_lock_irqsave(&info->lock,flags); + info->tx_count = info->tx_put = info->tx_get = 0; + del_timer(&info->tx_timer); + spin_unlock_irqrestore(&info->lock,flags); + + tty_wakeup(tty); +} + +/* throttle (stop) transmitter + */ +static void tx_hold(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_hold")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_hold()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if (info->tx_enabled) + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* release (start) transmitter + */ +static void tx_release(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_release")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_release()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Service an IOCTL request + * + * Arguments: + * + * tty pointer to tty instance data + * cmd IOCTL command code + * arg command argument/context + * + * Return Value: 0 if success, otherwise error code + */ +static int ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + SLMP_INFO *info = tty->driver_data; + void __user *argp = (void __user *)arg; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__, + info->device_name, cmd ); + + if (sanity_check(info, tty->name, "ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCMIWAIT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case MGSL_IOCGPARAMS: + return get_params(info, argp); + case MGSL_IOCSPARAMS: + return set_params(info, argp); + case MGSL_IOCGTXIDLE: + return get_txidle(info, argp); + case MGSL_IOCSTXIDLE: + return set_txidle(info, (int)arg); + case MGSL_IOCTXENABLE: + return tx_enable(info, (int)arg); + case MGSL_IOCRXENABLE: + return rx_enable(info, (int)arg); + case MGSL_IOCTXABORT: + return tx_abort(info); + case MGSL_IOCGSTATS: + return get_stats(info, argp); + case MGSL_IOCWAITEVENT: + return wait_mgsl_event(info, argp); + case MGSL_IOCLOOPTXDONE: + return 0; // TODO: Not supported, need to document + /* Wait for modem input (DCD,RI,DSR,CTS) change + * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) + */ + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + SLMP_INFO *info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +/* + * /proc fs routines.... + */ + +static inline void line_info(struct seq_file *m, SLMP_INFO *info) +{ + char stat_buf[30]; + unsigned long flags; + + seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n" + "\tIRQ=%d MaxFrameSize=%u\n", + info->device_name, + info->phys_sca_base, + info->phys_memory_base, + info->phys_statctrl_base, + info->phys_lcr_base, + info->irq_level, + info->max_frame_size ); + + /* output current serial signal states */ + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->serial_signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->serial_signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->serial_signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->serial_signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->serial_signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->serial_signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode == MGSL_MODE_HDLC) { + seq_printf(m, "\tHDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + seq_printf(m, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + seq_printf(m, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + seq_printf(m, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + seq_printf(m, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + seq_printf(m, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + seq_printf(m, " rxlong:%d", info->icount.rxcrc); + } else { + seq_printf(m, "\tASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + seq_printf(m, " fe:%d", info->icount.frame); + if (info->icount.parity) + seq_printf(m, " pe:%d", info->icount.parity); + if (info->icount.brk) + seq_printf(m, " brk:%d", info->icount.brk); + if (info->icount.overrun) + seq_printf(m, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + seq_printf(m, " %s\n", stat_buf+1); + + seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); +} + +/* Called to print information about devices + */ +static int synclinkmp_proc_show(struct seq_file *m, void *v) +{ + SLMP_INFO *info; + + seq_printf(m, "synclinkmp driver:%s\n", driver_version); + + info = synclinkmp_device_list; + while( info ) { + line_info(m, info); + info = info->next_device; + } + return 0; +} + +static int synclinkmp_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, synclinkmp_proc_show, NULL); +} + +static const struct file_operations synclinkmp_proc_fops = { + .owner = THIS_MODULE, + .open = synclinkmp_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* Return the count of bytes in transmit buffer + */ +static int chars_in_buffer(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + + if (sanity_check(info, tty->name, "chars_in_buffer")) + return 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s chars_in_buffer()=%d\n", + __FILE__, __LINE__, info->device_name, info->tx_count); + + return info->tx_count; +} + +/* Signal remote device to throttle send data (our receive data) + */ +static void throttle(struct tty_struct * tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s throttle() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "throttle")) + return; + + if (I_IXOFF(tty)) + send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock,flags); + info->serial_signals &= ~SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* Signal remote device to stop throttling send data (our receive data) + */ +static void unthrottle(struct tty_struct * tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s unthrottle() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* set or clear transmit break condition + * break_state -1=set break condition, 0=clear + */ +static int set_break(struct tty_struct *tty, int break_state) +{ + unsigned char RegValue; + SLMP_INFO * info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_break(%d)\n", + __FILE__,__LINE__, info->device_name, break_state); + + if (sanity_check(info, tty->name, "set_break")) + return -EINVAL; + + spin_lock_irqsave(&info->lock,flags); + RegValue = read_reg(info, CTL); + if (break_state == -1) + RegValue |= BIT3; + else + RegValue &= ~BIT3; + write_reg(info, CTL, RegValue); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +#if SYNCLINK_GENERIC_HDLC + +/** + * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * set encoding and frame check sequence (FCS) options + * + * dev pointer to network device structure + * encoding serial encoding setting + * parity FCS setting + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + + return 0; +} + +/** + * called by generic HDLC layer to send frame + * + * skb socket buffer containing HDLC frame + * dev pointer to network device structure + */ +static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* copy data to device buffers */ + info->tx_count = skb->len; + tx_load_dma_buffer(info, skb->data, skb->len); + + /* update network statistics */ + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + /* save start time for transmit timeout detection */ + dev->trans_start = jiffies; + + /* start hardware transmitter if necessary */ + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + + return NETDEV_TX_OK; +} + +/** + * called by network layer when interface enabled + * claim resources and initialize hardware + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + int rc; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); + + /* generic HDLC layer open processing */ + if ((rc = hdlc_open(dev))) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->port.count != 0 || info->netcount != 0) { + printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert DTR and RTS, apply hardware settings */ + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + program_hw(info); + + /* enable network layer transmit */ + dev->trans_start = jiffies; + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->lock, flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock, flags); + if (info->serial_signals & SerialSignal_DCD) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + +/** + * called by network layer when interface is disabled + * shutdown hardware and release resources + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + return 0; +} + +/** + * called by network layer to process IOCTL call to network device + * + * dev pointer to network device structure + * ifr pointer to network interface request structure + * cmd IOCTL command code + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + SLMP_INFO *info = dev_to_port(dev); + unsigned int flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * called by network layer when transmit timeout is detected + * + * dev pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_tx_timeout(%s)\n",dev->name); + + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + + spin_lock_irqsave(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); + + netif_wake_queue(dev); +} + +/** + * called by device driver when transmit completes + * reenable network layer transmit if stopped + * + * info pointer to device instance information + */ +static void hdlcdev_tx_done(SLMP_INFO *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * called by device driver when frame received + * pass frame to network layer + * + * info pointer to device instance information + * buf pointer to buffer contianing frame data + * size count of data bytes in buf + */ +static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_rx(%s)\n",dev->name); + + if (skb == NULL) { + printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", + dev->name); + dev->stats.rx_dropped++; + return; + } + + memcpy(skb_put(skb, size), buf, size); + + skb->protocol = hdlc_type_trans(skb, dev); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += size; + + netif_rx(skb); +} + +static const struct net_device_ops hdlcdev_ops = { + .ndo_open = hdlcdev_open, + .ndo_stop = hdlcdev_close, + .ndo_change_mtu = hdlc_change_mtu, + .ndo_start_xmit = hdlc_start_xmit, + .ndo_do_ioctl = hdlcdev_ioctl, + .ndo_tx_timeout = hdlcdev_tx_timeout, +}; + +/** + * called by device driver when adding device instance + * do generic HDLC initialization + * + * info pointer to device instance information + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_init(SLMP_INFO *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + if (!(dev = alloc_hdlcdev(info))) { + printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->mem_start = info->phys_sca_base; + dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1; + dev->irq = info->irq_level; + + /* network layer callbacks and settings */ + dev->netdev_ops = &hdlcdev_ops; + dev->watchdog_timeo = 10 * HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + if ((rc = register_hdlc_device(dev))) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * called by device driver when removing device instance + * do generic HDLC cleanup + * + * info pointer to device instance information + */ +static void hdlcdev_exit(SLMP_INFO *info) +{ + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* CONFIG_HDLC */ + + +/* Return next bottom half action to perform. + * Return Value: BH action code or 0 if nothing to do. + */ +static int bh_action(SLMP_INFO *info) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&info->lock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } + + if (!rc) { + /* Mark BH routine as complete */ + info->bh_running = false; + info->bh_requested = false; + } + + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +/* Perform bottom half processing of work items queued by ISR. + */ +static void bh_handler(struct work_struct *work) +{ + SLMP_INFO *info = container_of(work, SLMP_INFO, task); + int action; + + if (!info) + return; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() entry\n", + __FILE__,__LINE__,info->device_name); + + info->bh_running = true; + + while((action = bh_action(info)) != 0) { + + /* Process work item */ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() work item action=%d\n", + __FILE__,__LINE__,info->device_name, action); + + switch (action) { + + case BH_RECEIVE: + bh_receive(info); + break; + case BH_TRANSMIT: + bh_transmit(info); + break; + case BH_STATUS: + bh_status(info); + break; + default: + /* unknown work item ID */ + printk("%s(%d):%s Unknown work item ID=%08X!\n", + __FILE__,__LINE__,info->device_name,action); + break; + } + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() exit\n", + __FILE__,__LINE__,info->device_name); +} + +static void bh_receive(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_receive()\n", + __FILE__,__LINE__,info->device_name); + + while( rx_get_frame(info) ); +} + +static void bh_transmit(SLMP_INFO *info) +{ + struct tty_struct *tty = info->port.tty; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_transmit() entry\n", + __FILE__,__LINE__,info->device_name); + + if (tty) + tty_wakeup(tty); +} + +static void bh_status(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_status() entry\n", + __FILE__,__LINE__,info->device_name); + + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; +} + +static void isr_timer(SLMP_INFO * info) +{ + unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; + + /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */ + write_reg(info, IER2, 0); + + /* TMCS, Timer Control/Status Register + * + * 07 CMF, Compare match flag (read only) 1=match + * 06 ECMI, CMF Interrupt Enable: 0=disabled + * 05 Reserved, must be 0 + * 04 TME, Timer Enable + * 03..00 Reserved, must be 0 + * + * 0000 0000 + */ + write_reg(info, (unsigned char)(timer + TMCS), 0); + + info->irq_occurred = true; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_timer()\n", + __FILE__,__LINE__,info->device_name); +} + +static void isr_rxint(SLMP_INFO * info) +{ + struct tty_struct *tty = info->port.tty; + struct mgsl_icount *icount = &info->icount; + unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD); + unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN; + + /* clear status bits */ + if (status) + write_reg(info, SR1, status); + + if (status2) + write_reg(info, SR2, status2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxint status=%02X %02x\n", + __FILE__,__LINE__,info->device_name,status,status2); + + if (info->params.mode == MGSL_MODE_ASYNC) { + if (status & BRKD) { + icount->brk++; + + /* process break detection if tty control + * is not set to ignore it + */ + if ( tty ) { + if (!(status & info->ignore_status_mask1)) { + if (info->read_status_mask1 & BRKD) { + tty_insert_flip_char(tty, 0, TTY_BREAK); + if (info->port.flags & ASYNC_SAK) + do_SAK(tty); + } + } + } + } + } + else { + if (status & (FLGD|IDLD)) { + if (status & FLGD) + info->icount.exithunt++; + else if (status & IDLD) + info->icount.rxidle++; + wake_up_interruptible(&info->event_wait_q); + } + } + + if (status & CDCD) { + /* simulate a common modem status change interrupt + * for our handler + */ + get_signals( info ); + isr_io_pin(info, + MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD)); + } +} + +/* + * handle async rx data interrupts + */ +static void isr_rxrdy(SLMP_INFO * info) +{ + u16 status; + unsigned char DataByte; + struct tty_struct *tty = info->port.tty; + struct mgsl_icount *icount = &info->icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxrdy\n", + __FILE__,__LINE__,info->device_name); + + while((status = read_reg(info,CST0)) & BIT0) + { + int flag = 0; + bool over = false; + DataByte = read_reg(info,TRB); + + icount->rx++; + + if ( status & (PE + FRME + OVRN) ) { + printk("%s(%d):%s rxerr=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + /* update error statistics */ + if (status & PE) + icount->parity++; + else if (status & FRME) + icount->frame++; + else if (status & OVRN) + icount->overrun++; + + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask2) + continue; + + status &= info->read_status_mask2; + + if ( tty ) { + if (status & PE) + flag = TTY_PARITY; + else if (status & FRME) + flag = TTY_FRAME; + if (status & OVRN) { + /* Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + over = true; + } + } + } /* end of if (error) */ + + if ( tty ) { + tty_insert_flip_char(tty, DataByte, flag); + if (over) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + } + + if ( debug_level >= DEBUG_LEVEL_ISR ) { + printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n", + __FILE__,__LINE__,info->device_name, + icount->rx,icount->brk,icount->parity, + icount->frame,icount->overrun); + } + + if ( tty ) + tty_flip_buffer_push(tty); +} + +static void isr_txeom(SLMP_INFO * info, unsigned char status) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txeom status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ + write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + if (status & UDRN) { + write_reg(info, CMD, TXRESET); + write_reg(info, CMD, TXENABLE); + } else + write_reg(info, CMD, TXBUFCLR); + + /* disable and clear tx interrupts */ + info->ie0_value &= ~TXRDYE; + info->ie1_value &= ~(IDLE + UDRN); + write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); + write_reg(info, SR1, (unsigned char)(UDRN + IDLE)); + + if ( info->tx_active ) { + if (info->params.mode != MGSL_MODE_ASYNC) { + if (status & UDRN) + info->icount.txunder++; + else if (status & IDLE) + info->icount.txok++; + } + + info->tx_active = false; + info->tx_count = info->tx_put = info->tx_get = 0; + + del_timer(&info->tx_timer); + + if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) { + info->serial_signals &= ~SerialSignal_RTS; + info->drop_rts_on_tx_done = false; + set_signals(info); + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { + tx_stop(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + } +} + + +/* + * handle tx status interrupts + */ +static void isr_txint(SLMP_INFO * info) +{ + unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS); + + /* clear status bits */ + write_reg(info, SR1, status); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txint status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + if (status & (UDRN + IDLE)) + isr_txeom(info, status); + + if (status & CCTS) { + /* simulate a common modem status change interrupt + * for our handler + */ + get_signals( info ); + isr_io_pin(info, + MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS)); + + } +} + +/* + * handle async tx data interrupts + */ +static void isr_txrdy(SLMP_INFO * info) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txrdy() tx_count=%d\n", + __FILE__,__LINE__,info->device_name,info->tx_count); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* disable TXRDY IRQ, enable IDLE IRQ */ + info->ie0_value &= ~TXRDYE; + info->ie1_value |= IDLE; + write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); + return; + } + + if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { + tx_stop(info); + return; + } + + if ( info->tx_count ) + tx_load_fifo( info ); + else { + info->tx_active = false; + info->ie0_value &= ~TXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + if (info->tx_count < WAKEUP_CHARS) + info->pending_bh |= BH_TRANSMIT; +} + +static void isr_rxdmaok(SLMP_INFO * info) +{ + /* BIT7 = EOT (end of transfer) + * BIT6 = EOM (end of message/frame) + */ + unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxdmaok(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + info->pending_bh |= BH_RECEIVE; +} + +static void isr_rxdmaerror(SLMP_INFO * info) +{ + /* BIT5 = BOF (buffer overflow) + * BIT4 = COF (counter overflow) + */ + unsigned char status = read_reg(info,RXDMA + DSR) & 0x30; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + info->rx_overflow = true; + info->pending_bh |= BH_RECEIVE; +} + +static void isr_txdmaok(SLMP_INFO * info) +{ + unsigned char status_reg1 = read_reg(info, SR1); + + write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ + write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txdmaok(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status_reg1); + + /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */ + write_reg16(info, TRC0, 0); + info->ie0_value |= TXRDYE; + write_reg(info, IE0, info->ie0_value); +} + +static void isr_txdmaerror(SLMP_INFO * info) +{ + /* BIT5 = BOF (buffer overflow) + * BIT4 = COF (counter overflow) + */ + unsigned char status = read_reg(info,TXDMA + DSR) & 0x30; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, TXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txdmaerror(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); +} + +/* handle input serial signal changes + */ +static void isr_io_pin( SLMP_INFO *info, u16 status ) +{ + struct mgsl_icount *icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):isr_io_pin status=%04X\n", + __FILE__,__LINE__,status); + + if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | + MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { + icount = &info->icount; + /* update input line counters */ + if (status & MISCSTATUS_RI_LATCHED) { + icount->rng++; + if ( status & SerialSignal_RI ) + info->input_signal_events.ri_up++; + else + info->input_signal_events.ri_down++; + } + if (status & MISCSTATUS_DSR_LATCHED) { + icount->dsr++; + if ( status & SerialSignal_DSR ) + info->input_signal_events.dsr_up++; + else + info->input_signal_events.dsr_down++; + } + if (status & MISCSTATUS_DCD_LATCHED) { + if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { + info->ie1_value &= ~CDCD; + write_reg(info, IE1, info->ie1_value); + } + icount->dcd++; + if (status & SerialSignal_DCD) { + info->input_signal_events.dcd_up++; + } else + info->input_signal_events.dcd_down++; +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) { + if (status & SerialSignal_DCD) + netif_carrier_on(info->netdev); + else + netif_carrier_off(info->netdev); + } +#endif + } + if (status & MISCSTATUS_CTS_LATCHED) + { + if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { + info->ie1_value &= ~CCTS; + write_reg(info, IE1, info->ie1_value); + } + icount->cts++; + if ( status & SerialSignal_CTS ) + info->input_signal_events.cts_up++; + else + info->input_signal_events.cts_down++; + } + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + if ( (info->port.flags & ASYNC_CHECK_CD) && + (status & MISCSTATUS_DCD_LATCHED) ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s CD now %s...", info->device_name, + (status & SerialSignal_DCD) ? "on" : "off"); + if (status & SerialSignal_DCD) + wake_up_interruptible(&info->port.open_wait); + else { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("doing serial hangup..."); + if (info->port.tty) + tty_hangup(info->port.tty); + } + } + + if ( (info->port.flags & ASYNC_CTS_FLOW) && + (status & MISCSTATUS_CTS_LATCHED) ) { + if ( info->port.tty ) { + if (info->port.tty->hw_stopped) { + if (status & SerialSignal_CTS) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx start..."); + info->port.tty->hw_stopped = 0; + tx_start(info); + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(status & SerialSignal_CTS)) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx stop..."); + info->port.tty->hw_stopped = 1; + tx_stop(info); + } + } + } + } + } + + info->pending_bh |= BH_STATUS; +} + +/* Interrupt service routine entry point. + * + * Arguments: + * irq interrupt number that caused interrupt + * dev_id device ID supplied during interrupt registration + * regs interrupted processor context + */ +static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id) +{ + SLMP_INFO *info = dev_id; + unsigned char status, status0, status1=0; + unsigned char dmastatus, dmastatus0, dmastatus1=0; + unsigned char timerstatus0, timerstatus1=0; + unsigned char shift; + unsigned int i; + unsigned short tmp; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n", + __FILE__, __LINE__, info->irq_level); + + spin_lock(&info->lock); + + for(;;) { + + /* get status for SCA0 (ports 0-1) */ + tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */ + status0 = (unsigned char)tmp; + dmastatus0 = (unsigned char)(tmp>>8); + timerstatus0 = read_reg(info, ISR2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", + __FILE__, __LINE__, info->device_name, + status0, dmastatus0, timerstatus0); + + if (info->port_count == 4) { + /* get status for SCA1 (ports 2-3) */ + tmp = read_reg16(info->port_array[2], ISR0); + status1 = (unsigned char)tmp; + dmastatus1 = (unsigned char)(tmp>>8); + timerstatus1 = read_reg(info->port_array[2], ISR2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n", + __FILE__,__LINE__,info->device_name, + status1,dmastatus1,timerstatus1); + } + + if (!status0 && !dmastatus0 && !timerstatus0 && + !status1 && !dmastatus1 && !timerstatus1) + break; + + for(i=0; i < info->port_count ; i++) { + if (info->port_array[i] == NULL) + continue; + if (i < 2) { + status = status0; + dmastatus = dmastatus0; + } else { + status = status1; + dmastatus = dmastatus1; + } + + shift = i & 1 ? 4 :0; + + if (status & BIT0 << shift) + isr_rxrdy(info->port_array[i]); + if (status & BIT1 << shift) + isr_txrdy(info->port_array[i]); + if (status & BIT2 << shift) + isr_rxint(info->port_array[i]); + if (status & BIT3 << shift) + isr_txint(info->port_array[i]); + + if (dmastatus & BIT0 << shift) + isr_rxdmaerror(info->port_array[i]); + if (dmastatus & BIT1 << shift) + isr_rxdmaok(info->port_array[i]); + if (dmastatus & BIT2 << shift) + isr_txdmaerror(info->port_array[i]); + if (dmastatus & BIT3 << shift) + isr_txdmaok(info->port_array[i]); + } + + if (timerstatus0 & (BIT5 | BIT4)) + isr_timer(info->port_array[0]); + if (timerstatus0 & (BIT7 | BIT6)) + isr_timer(info->port_array[1]); + if (timerstatus1 & (BIT5 | BIT4)) + isr_timer(info->port_array[2]); + if (timerstatus1 & (BIT7 | BIT6)) + isr_timer(info->port_array[3]); + } + + for(i=0; i < info->port_count ; i++) { + SLMP_INFO * port = info->port_array[i]; + + /* Request bottom half processing if there's something + * for it to do and the bh is not already running. + * + * Note: startup adapter diags require interrupts. + * do not request bottom half processing if the + * device is not open in a normal mode. + */ + if ( port && (port->port.count || port->netcount) && + port->pending_bh && !port->bh_running && + !port->bh_requested ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s queueing bh task.\n", + __FILE__,__LINE__,port->device_name); + schedule_work(&port->task); + port->bh_requested = true; + } + } + + spin_unlock(&info->lock); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n", + __FILE__, __LINE__, info->irq_level); + return IRQ_HANDLED; +} + +/* Initialize and start device. + */ +static int startup(SLMP_INFO * info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name); + + if (info->port.flags & ASYNC_INITIALIZED) + return 0; + + if (!info->tx_buf) { + info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (!info->tx_buf) { + printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", + __FILE__,__LINE__,info->device_name); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + memset(&info->icount, 0, sizeof(info->icount)); + + /* program hardware for current parameters */ + reset_port(info); + + change_params(info); + + mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->port.flags |= ASYNC_INITIALIZED; + + return 0; +} + +/* Called by close() and hangup() to shutdown hardware + */ +static void shutdown(SLMP_INFO * info) +{ + unsigned long flags; + + if (!(info->port.flags & ASYNC_INITIALIZED)) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s synclinkmp_shutdown()\n", + __FILE__,__LINE__, info->device_name ); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer(&info->tx_timer); + del_timer(&info->status_timer); + + kfree(info->tx_buf); + info->tx_buf = NULL; + + spin_lock_irqsave(&info->lock,flags); + + reset_port(info); + + if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { + info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + set_signals(info); + } + + spin_unlock_irqrestore(&info->lock,flags); + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->port.flags &= ~ASYNC_INITIALIZED; +} + +static void program_hw(SLMP_INFO *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + + rx_stop(info); + tx_stop(info); + + info->tx_count = info->tx_put = info->tx_get = 0; + + if (info->params.mode == MGSL_MODE_HDLC || info->netcount) + hdlc_mode(info); + else + async_mode(info); + + set_signals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + info->ie1_value |= (CDCD|CCTS); + write_reg(info, IE1, info->ie1_value); + + get_signals(info); + + if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) ) + rx_start(info); + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Reconfigure adapter based on new parameters + */ +static void change_params(SLMP_INFO *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->port.tty || !info->port.tty->termios) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s change_params()\n", + __FILE__,__LINE__, info->device_name ); + + cflag = info->port.tty->termios->c_cflag; + + /* if B0 rate (hangup) specified then negate DTR and RTS */ + /* otherwise assert DTR and RTS */ + if (cflag & CBAUD) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: info->params.data_bits = 7; break; + } + + if (cflag & CSTOPB) + info->params.stop_bits = 2; + else + info->params.stop_bits = 1; + + info->params.parity = ASYNC_PARITY_NONE; + if (cflag & PARENB) { + if (cflag & PARODD) + info->params.parity = ASYNC_PARITY_ODD; + else + info->params.parity = ASYNC_PARITY_EVEN; +#ifdef CMSPAR + if (cflag & CMSPAR) + info->params.parity = ASYNC_PARITY_SPACE; +#endif + } + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + /* if port data rate is set to 460800 or less then + * allow tty settings to override, otherwise keep the + * current data rate. + */ + if (info->params.data_rate <= 460800) { + info->params.data_rate = tty_get_baud_rate(info->port.tty); + } + + if ( info->params.data_rate ) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + if (cflag & CRTSCTS) + info->port.flags |= ASYNC_CTS_FLOW; + else + info->port.flags &= ~ASYNC_CTS_FLOW; + + if (cflag & CLOCAL) + info->port.flags &= ~ASYNC_CHECK_CD; + else + info->port.flags |= ASYNC_CHECK_CD; + + /* process tty input control flags */ + + info->read_status_mask2 = OVRN; + if (I_INPCK(info->port.tty)) + info->read_status_mask2 |= PE | FRME; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask1 |= BRKD; + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask2 |= PE | FRME; + if (I_IGNBRK(info->port.tty)) { + info->ignore_status_mask1 |= BRKD; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask2 |= OVRN; + } + + program_hw(info); +} + +static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_params()\n", + __FILE__,__LINE__, info->device_name); + + if (!user_icount) { + memset(&info->icount, 0, sizeof(info->icount)); + } else { + mutex_lock(&info->port.mutex); + COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); + mutex_unlock(&info->port.mutex); + if (err) + return -EFAULT; + } + + return 0; +} + +static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) +{ + int err; + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_params()\n", + __FILE__,__LINE__, info->device_name); + + mutex_lock(&info->port.mutex); + COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + mutex_unlock(&info->port.mutex); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s get_params() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; +} + +static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_params\n", + __FILE__,__LINE__,info->device_name ); + COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s set_params() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + mutex_lock(&info->port.mutex); + spin_lock_irqsave(&info->lock,flags); + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->lock,flags); + + change_params(info); + mutex_unlock(&info->port.mutex); + + return 0; +} + +static int get_txidle(SLMP_INFO * info, int __user *idle_mode) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_txidle()=%d\n", + __FILE__,__LINE__, info->device_name, info->idle_mode); + + COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s get_txidle() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; +} + +static int set_txidle(SLMP_INFO * info, int idle_mode) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_txidle(%d)\n", + __FILE__,__LINE__,info->device_name, idle_mode ); + + spin_lock_irqsave(&info->lock,flags); + info->idle_mode = idle_mode; + tx_set_idle( info ); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int tx_enable(SLMP_INFO * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tx_enable(%d)\n", + __FILE__,__LINE__,info->device_name, enable); + + spin_lock_irqsave(&info->lock,flags); + if ( enable ) { + if ( !info->tx_enabled ) { + tx_start(info); + } + } else { + if ( info->tx_enabled ) + tx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* abort send HDLC frame + */ +static int tx_abort(SLMP_INFO * info) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tx_abort()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) { + info->ie1_value &= ~UDRN; + info->ie1_value |= IDLE; + write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + write_reg(info, CMD, TXABORT); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int rx_enable(SLMP_INFO * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s rx_enable(%d)\n", + __FILE__,__LINE__,info->device_name,enable); + + spin_lock_irqsave(&info->lock,flags); + if ( enable ) { + if ( !info->rx_enabled ) + rx_start(info); + } else { + if ( info->rx_enabled ) + rx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* wait for specified event to occur + */ +static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); + if (rc) { + return -EFAULT; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_mgsl_event(%d)\n", + __FILE__,__LINE__,info->device_name,mask); + + spin_lock_irqsave(&info->lock,flags); + + /* return immediately if state matches requested events */ + get_signals(info); + s = info->serial_signals; + + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->lock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { + unsigned char oldval = info->ie1_value; + unsigned char newval = oldval + + (mask & MgslEvent_ExitHuntMode ? FLGD:0) + + (mask & MgslEvent_IdleReceived ? IDLD:0); + if ( oldval != newval ) { + info->ie1_value = newval; + write_reg(info, IE1, info->ie1_value); + } + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->lock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + info->ie1_value &= ~(FLGD|IDLD); + write_reg(info, IE1, info->ie1_value); + } + spin_unlock_irqrestore(&info->lock,flags); + } +exit: + if ( rc == 0 ) + PUT_USER(rc, events, mask_ptr); + + return rc; +} + +static int modem_input_wait(SLMP_INFO *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* return the state of the serial control and status signals + */ +static int tiocmget(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + + ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + + ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + + ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + + ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + + ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmget() value=%08X\n", + __FILE__,__LINE__, info->device_name, result ); + return result; +} + +/* set modem control signals (DTR/RTS) + */ +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmset(%x,%x)\n", + __FILE__,__LINE__,info->device_name, set, clear); + + if (set & TIOCM_RTS) + info->serial_signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->serial_signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->serial_signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->serial_signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + return 0; +} + +static int carrier_raised(struct tty_port *port) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void dtr_rts(struct tty_port *port, int on) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + if (on) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Block the current process until the specified port is ready to open. + */ +static int block_til_ready(struct tty_struct *tty, struct file *filp, + SLMP_INFO *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + bool do_clocal = false; + bool extra_count = false; + unsigned long flags; + int cd; + struct tty_port *port = &info->port; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready()\n", + __FILE__,__LINE__, tty->driver->name ); + + if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ + /* nonblock mode is set or port is not enabled */ + /* just verify that callout device is not active */ + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = true; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() before block, count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + spin_lock_irqsave(&info->lock, flags); + if (!tty_hung_up_p(filp)) { + extra_count = true; + port->count--; + } + spin_unlock_irqrestore(&info->lock, flags); + port->blocked_open++; + + while (1) { + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + cd = tty_port_carrier_raised(port); + + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd)) + break; + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + tty_unlock(); + schedule(); + tty_lock(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + if (extra_count) + port->count++; + port->blocked_open--; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() after, count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + if (!retval) + port->flags |= ASYNC_NORMAL_ACTIVE; + + return retval; +} + +static int alloc_dma_bufs(SLMP_INFO *info) +{ + unsigned short BuffersPerFrame; + unsigned short BufferCount; + + // Force allocation to start at 64K boundary for each port. + // This is necessary because *all* buffer descriptors for a port + // *must* be in the same 64K block. All descriptors on a port + // share a common 'base' address (upper 8 bits of 24 bits) programmed + // into the CBP register. + info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num; + + /* Calculate the number of DMA buffers necessary to hold the */ + /* largest allowable frame size. Note: If the max frame size is */ + /* not an even multiple of the DMA buffer size then we need to */ + /* round the buffer count per frame up one. */ + + BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE); + if ( info->max_frame_size % SCABUFSIZE ) + BuffersPerFrame++; + + /* calculate total number of data buffers (SCABUFSIZE) possible + * in one ports memory (SCA_MEM_SIZE/4) after allocating memory + * for the descriptor list (BUFFERLISTSIZE). + */ + BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE; + + /* limit number of buffers to maximum amount of descriptors */ + if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC)) + BufferCount = BUFFERLISTSIZE/sizeof(SCADESC); + + /* use enough buffers to transmit one max size frame */ + info->tx_buf_count = BuffersPerFrame + 1; + + /* never use more than half the available buffers for transmit */ + if (info->tx_buf_count > (BufferCount/2)) + info->tx_buf_count = BufferCount/2; + + if (info->tx_buf_count > SCAMAXDESC) + info->tx_buf_count = SCAMAXDESC; + + /* use remaining buffers for receive */ + info->rx_buf_count = BufferCount - info->tx_buf_count; + + if (info->rx_buf_count > SCAMAXDESC) + info->rx_buf_count = SCAMAXDESC; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n", + __FILE__,__LINE__, info->device_name, + info->tx_buf_count,info->rx_buf_count); + + if ( alloc_buf_list( info ) < 0 || + alloc_frame_bufs(info, + info->rx_buf_list, + info->rx_buf_list_ex, + info->rx_buf_count) < 0 || + alloc_frame_bufs(info, + info->tx_buf_list, + info->tx_buf_list_ex, + info->tx_buf_count) < 0 || + alloc_tmp_rx_buf(info) < 0 ) { + printk("%s(%d):%s Can't allocate DMA buffer memory\n", + __FILE__,__LINE__, info->device_name); + return -ENOMEM; + } + + rx_reset_buffers( info ); + + return 0; +} + +/* Allocate DMA buffers for the transmit and receive descriptor lists. + */ +static int alloc_buf_list(SLMP_INFO *info) +{ + unsigned int i; + + /* build list in adapter shared memory */ + info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc; + info->buffer_list_phys = info->port_array[0]->last_mem_alloc; + info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE; + + memset(info->buffer_list, 0, BUFFERLISTSIZE); + + /* Save virtual address pointers to the receive and */ + /* transmit buffer lists. (Receive 1st). These pointers will */ + /* be used by the processor to access the lists. */ + info->rx_buf_list = (SCADESC *)info->buffer_list; + + info->tx_buf_list = (SCADESC *)info->buffer_list; + info->tx_buf_list += info->rx_buf_count; + + /* Build links for circular buffer entry lists (tx and rx) + * + * Note: links are physical addresses read by the SCA device + * to determine the next buffer entry to use. + */ + + for ( i = 0; i < info->rx_buf_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->rx_buf_list_ex[i].phys_entry = + info->buffer_list_phys + (i * sizeof(SCABUFSIZE)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + info->rx_buf_list[i].next = info->buffer_list_phys; + if ( i < info->rx_buf_count - 1 ) + info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC); + + info->rx_buf_list[i].length = SCABUFSIZE; + } + + for ( i = 0; i < info->tx_buf_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys + + ((info->rx_buf_count + i) * sizeof(SCADESC)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->tx_buf_list[i].next = info->buffer_list_phys + + info->rx_buf_count * sizeof(SCADESC); + + if ( i < info->tx_buf_count - 1 ) + info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC); + } + + return 0; +} + +/* Allocate the frame DMA buffers used by the specified buffer list. + */ +static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) +{ + int i; + unsigned long phys_addr; + + for ( i = 0; i < count; i++ ) { + buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc; + phys_addr = info->port_array[0]->last_mem_alloc; + info->port_array[0]->last_mem_alloc += SCABUFSIZE; + + buf_list[i].buf_ptr = (unsigned short)phys_addr; + buf_list[i].buf_base = (unsigned char)(phys_addr >> 16); + } + + return 0; +} + +static void free_dma_bufs(SLMP_INFO *info) +{ + info->buffer_list = NULL; + info->rx_buf_list = NULL; + info->tx_buf_list = NULL; +} + +/* allocate buffer large enough to hold max_frame_size. + * This buffer is used to pass an assembled frame to the line discipline. + */ +static int alloc_tmp_rx_buf(SLMP_INFO *info) +{ + info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (info->tmp_rx_buf == NULL) + return -ENOMEM; + return 0; +} + +static void free_tmp_rx_buf(SLMP_INFO *info) +{ + kfree(info->tmp_rx_buf); + info->tmp_rx_buf = NULL; +} + +static int claim_resources(SLMP_INFO *info) +{ + if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->shared_mem_requested = true; + + if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) { + printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->lcr_mem_requested = true; + + if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_sca_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->sca_base_requested = true; + + if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_statctrl_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->sca_statctrl_requested = true; + + info->memory_base = ioremap_nocache(info->phys_memory_base, + SCA_MEM_SIZE); + if (!info->memory_base) { + printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + + info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE); + if (!info->lcr_base) { + printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->lcr_base += info->lcr_offset; + + info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE); + if (!info->sca_base) { + printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_sca_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->sca_base += info->sca_offset; + + info->statctrl_base = ioremap_nocache(info->phys_statctrl_base, + PAGE_SIZE); + if (!info->statctrl_base) { + printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_statctrl_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->statctrl_base += info->statctrl_offset; + + if ( !memory_test(info) ) { + printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + info->init_error = DiagStatus_MemoryError; + goto errout; + } + + return 0; + +errout: + release_resources( info ); + return -ENODEV; +} + +static void release_resources(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s release_resources() entry\n", + __FILE__,__LINE__,info->device_name ); + + if ( info->irq_requested ) { + free_irq(info->irq_level, info); + info->irq_requested = false; + } + + if ( info->shared_mem_requested ) { + release_mem_region(info->phys_memory_base,SCA_MEM_SIZE); + info->shared_mem_requested = false; + } + if ( info->lcr_mem_requested ) { + release_mem_region(info->phys_lcr_base + info->lcr_offset,128); + info->lcr_mem_requested = false; + } + if ( info->sca_base_requested ) { + release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE); + info->sca_base_requested = false; + } + if ( info->sca_statctrl_requested ) { + release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE); + info->sca_statctrl_requested = false; + } + + if (info->memory_base){ + iounmap(info->memory_base); + info->memory_base = NULL; + } + + if (info->sca_base) { + iounmap(info->sca_base - info->sca_offset); + info->sca_base=NULL; + } + + if (info->statctrl_base) { + iounmap(info->statctrl_base - info->statctrl_offset); + info->statctrl_base=NULL; + } + + if (info->lcr_base){ + iounmap(info->lcr_base - info->lcr_offset); + info->lcr_base = NULL; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s release_resources() exit\n", + __FILE__,__LINE__,info->device_name ); +} + +/* Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + */ +static void add_device(SLMP_INFO *info) +{ + info->next_device = NULL; + info->line = synclinkmp_device_count; + sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num); + + if (info->line < MAX_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + } + + synclinkmp_device_count++; + + if ( !synclinkmp_device_list ) + synclinkmp_device_list = info; + else { + SLMP_INFO *current_dev = synclinkmp_device_list; + while( current_dev->next_device ) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if ( info->max_frame_size < 4096 ) + info->max_frame_size = 4096; + else if ( info->max_frame_size > 65535 ) + info->max_frame_size = 65535; + + printk( "SyncLink MultiPort %s: " + "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n", + info->device_name, + info->phys_sca_base, + info->phys_memory_base, + info->phys_statctrl_base, + info->phys_lcr_base, + info->irq_level, + info->max_frame_size ); + +#if SYNCLINK_GENERIC_HDLC + hdlcdev_init(info); +#endif +} + +static const struct tty_port_operations port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, +}; + +/* Allocate and initialize a device instance structure + * + * Return Value: pointer to SLMP_INFO if success, otherwise NULL + */ +static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) +{ + SLMP_INFO *info; + + info = kzalloc(sizeof(SLMP_INFO), + GFP_KERNEL); + + if (!info) { + printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n", + __FILE__,__LINE__, adapter_num, port_num); + } else { + tty_port_init(&info->port); + info->port.ops = &port_ops; + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, bh_handler); + info->max_frame_size = 4096; + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->adapter_num = adapter_num; + info->port_num = port_num; + + /* Copy configuration info to device instance data */ + info->irq_level = pdev->irq; + info->phys_lcr_base = pci_resource_start(pdev,0); + info->phys_sca_base = pci_resource_start(pdev,2); + info->phys_memory_base = pci_resource_start(pdev,3); + info->phys_statctrl_base = pci_resource_start(pdev,4); + + /* Because veremap only works on page boundaries we must map + * a larger area than is actually implemented for the LCR + * memory range. We map a full page starting at the page boundary. + */ + info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); + info->phys_lcr_base &= ~(PAGE_SIZE-1); + + info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1); + info->phys_sca_base &= ~(PAGE_SIZE-1); + + info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1); + info->phys_statctrl_base &= ~(PAGE_SIZE-1); + + info->bus_type = MGSL_BUS_TYPE_PCI; + info->irq_flags = IRQF_SHARED; + + setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info); + setup_timer(&info->status_timer, status_timeout, + (unsigned long)info); + + /* Store the PCI9050 misc control register value because a flaw + * in the PCI9050 prevents LCR registers from being read if + * BIOS assigns an LCR base address with bit 7 set. + * + * Only the misc control register is accessed for which only + * write access is needed, so set an initial value and change + * bits to the device instance data as we write the value + * to the actual misc control register. + */ + info->misc_ctrl_value = 0x087e4546; + + /* initial port state is unknown - if startup errors + * occur, init_error will be set to indicate the + * problem. Once the port is fully initialized, + * this value will be set to 0 to indicate the + * port is available. + */ + info->init_error = -1; + } + + return info; +} + +static void device_init(int adapter_num, struct pci_dev *pdev) +{ + SLMP_INFO *port_array[SCA_MAX_PORTS]; + int port; + + /* allocate device instances for up to SCA_MAX_PORTS devices */ + for ( port = 0; port < SCA_MAX_PORTS; ++port ) { + port_array[port] = alloc_dev(adapter_num,port,pdev); + if( port_array[port] == NULL ) { + for ( --port; port >= 0; --port ) + kfree(port_array[port]); + return; + } + } + + /* give copy of port_array to all ports and add to device list */ + for ( port = 0; port < SCA_MAX_PORTS; ++port ) { + memcpy(port_array[port]->port_array,port_array,sizeof(port_array)); + add_device( port_array[port] ); + spin_lock_init(&port_array[port]->lock); + } + + /* Allocate and claim adapter resources */ + if ( !claim_resources(port_array[0]) ) { + + alloc_dma_bufs(port_array[0]); + + /* copy resource information from first port to others */ + for ( port = 1; port < SCA_MAX_PORTS; ++port ) { + port_array[port]->lock = port_array[0]->lock; + port_array[port]->irq_level = port_array[0]->irq_level; + port_array[port]->memory_base = port_array[0]->memory_base; + port_array[port]->sca_base = port_array[0]->sca_base; + port_array[port]->statctrl_base = port_array[0]->statctrl_base; + port_array[port]->lcr_base = port_array[0]->lcr_base; + alloc_dma_bufs(port_array[port]); + } + + if ( request_irq(port_array[0]->irq_level, + synclinkmp_interrupt, + port_array[0]->irq_flags, + port_array[0]->device_name, + port_array[0]) < 0 ) { + printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n", + __FILE__,__LINE__, + port_array[0]->device_name, + port_array[0]->irq_level ); + } + else { + port_array[0]->irq_requested = true; + adapter_test(port_array[0]); + } + } +} + +static const struct tty_operations ops = { + .open = open, + .close = close, + .write = write, + .put_char = put_char, + .flush_chars = flush_chars, + .write_room = write_room, + .chars_in_buffer = chars_in_buffer, + .flush_buffer = flush_buffer, + .ioctl = ioctl, + .throttle = throttle, + .unthrottle = unthrottle, + .send_xchar = send_xchar, + .break_ctl = set_break, + .wait_until_sent = wait_until_sent, + .set_termios = set_termios, + .stop = tx_hold, + .start = tx_release, + .hangup = hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, + .get_icount = get_icount, + .proc_fops = &synclinkmp_proc_fops, +}; + + +static void synclinkmp_cleanup(void) +{ + int rc; + SLMP_INFO *info; + SLMP_INFO *tmp; + + printk("Unloading %s %s\n", driver_name, driver_version); + + if (serial_driver) { + if ((rc = tty_unregister_driver(serial_driver))) + printk("%s(%d) failed to unregister tty driver err=%d\n", + __FILE__,__LINE__,rc); + put_tty_driver(serial_driver); + } + + /* reset devices */ + info = synclinkmp_device_list; + while(info) { + reset_port(info); + info = info->next_device; + } + + /* release devices */ + info = synclinkmp_device_list; + while(info) { +#if SYNCLINK_GENERIC_HDLC + hdlcdev_exit(info); +#endif + free_dma_bufs(info); + free_tmp_rx_buf(info); + if ( info->port_num == 0 ) { + if (info->sca_base) + write_reg(info, LPR, 1); /* set low power mode */ + release_resources(info); + } + tmp = info; + info = info->next_device; + kfree(tmp); + } + + pci_unregister_driver(&synclinkmp_pci_driver); +} + +/* Driver initialization entry point. + */ + +static int __init synclinkmp_init(void) +{ + int rc; + + if (break_on_load) { + synclinkmp_get_text_ptr(); + BREAKPOINT(); + } + + printk("%s %s\n", driver_name, driver_version); + + if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) { + printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); + return rc; + } + + serial_driver = alloc_tty_driver(128); + if (!serial_driver) { + rc = -ENOMEM; + goto error; + } + + /* Initialize the tty_driver structure */ + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = "synclinkmp"; + serial_driver->name = "ttySLM"; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->init_termios.c_ispeed = 9600; + serial_driver->init_termios.c_ospeed = 9600; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + printk("%s(%d):Couldn't register serial driver\n", + __FILE__,__LINE__); + put_tty_driver(serial_driver); + serial_driver = NULL; + goto error; + } + + printk("%s %s, tty major#%d\n", + driver_name, driver_version, + serial_driver->major); + + return 0; + +error: + synclinkmp_cleanup(); + return rc; +} + +static void __exit synclinkmp_exit(void) +{ + synclinkmp_cleanup(); +} + +module_init(synclinkmp_init); +module_exit(synclinkmp_exit); + +/* Set the port for internal loopback mode. + * The TxCLK and RxCLK signals are generated from the BRG and + * the TxD is looped back to the RxD internally. + */ +static void enable_loopback(SLMP_INFO *info, int enable) +{ + if (enable) { + /* MD2 (Mode Register 2) + * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback + */ + write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0))); + + /* degate external TxC clock source */ + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + write_control_reg(info); + + /* RXS/TXS (Rx/Tx clock source) + * 07 Reserved, must be 0 + * 06..04 Clock Source, 100=BRG + * 03..00 Clock Divisor, 0000=1 + */ + write_reg(info, RXS, 0x40); + write_reg(info, TXS, 0x40); + + } else { + /* MD2 (Mode Register 2) + * 01..00 CNCT<1..0> Channel connection, 0=normal + */ + write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0))); + + /* RXS/TXS (Rx/Tx clock source) + * 07 Reserved, must be 0 + * 06..04 Clock Source, 000=RxC/TxC Pin + * 03..00 Clock Divisor, 0000=1 + */ + write_reg(info, RXS, 0x00); + write_reg(info, TXS, 0x00); + } + + /* set LinkSpeed if available, otherwise default to 2Mbps */ + if (info->params.clock_speed) + set_rate(info, info->params.clock_speed); + else + set_rate(info, 3686400); +} + +/* Set the baud rate register to the desired speed + * + * data_rate data rate of clock in bits per second + * A data rate of 0 disables the AUX clock. + */ +static void set_rate( SLMP_INFO *info, u32 data_rate ) +{ + u32 TMCValue; + unsigned char BRValue; + u32 Divisor=0; + + /* fBRG = fCLK/(TMC * 2^BR) + */ + if (data_rate != 0) { + Divisor = 14745600/data_rate; + if (!Divisor) + Divisor = 1; + + TMCValue = Divisor; + + BRValue = 0; + if (TMCValue != 1 && TMCValue != 2) { + /* BRValue of 0 provides 50/50 duty cycle *only* when + * TMCValue is 1 or 2. BRValue of 1 to 9 always provides + * 50/50 duty cycle. + */ + BRValue = 1; + TMCValue >>= 1; + } + + /* while TMCValue is too big for TMC register, divide + * by 2 and increment BR exponent. + */ + for(; TMCValue > 256 && BRValue < 10; BRValue++) + TMCValue >>= 1; + + write_reg(info, TXS, + (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue)); + write_reg(info, RXS, + (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue)); + write_reg(info, TMC, (unsigned char)TMCValue); + } + else { + write_reg(info, TXS,0); + write_reg(info, RXS,0); + write_reg(info, TMC, 0); + } +} + +/* Disable receiver + */ +static void rx_stop(SLMP_INFO *info) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s rx_stop()\n", + __FILE__,__LINE__, info->device_name ); + + write_reg(info, CMD, RXRESET); + + info->ie0_value &= ~RXRDYE; + write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */ + + write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ + write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ + write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */ + + info->rx_enabled = false; + info->rx_overflow = false; +} + +/* enable the receiver + */ +static void rx_start(SLMP_INFO *info) +{ + int i; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s rx_start()\n", + __FILE__,__LINE__, info->device_name ); + + write_reg(info, CMD, RXRESET); + + if ( info->params.mode == MGSL_MODE_HDLC ) { + /* HDLC, disabe IRQ on rxdata */ + info->ie0_value &= ~RXRDYE; + write_reg(info, IE0, info->ie0_value); + + /* Reset all Rx DMA buffers and program rx dma */ + write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ + write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ + + for (i = 0; i < info->rx_buf_count; i++) { + info->rx_buf_list[i].status = 0xff; + + // throttle to 4 shared memory writes at a time to prevent + // hogging local bus (keep latency time for DMA requests low). + if (!(i % 4)) + read_status_reg(info); + } + info->current_rx_buf = 0; + + /* set current/1st descriptor address */ + write_reg16(info, RXDMA + CDA, + info->rx_buf_list_ex[0].phys_entry); + + /* set new last rx descriptor address */ + write_reg16(info, RXDMA + EDA, + info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry); + + /* set buffer length (shared by all rx dma data buffers) */ + write_reg16(info, RXDMA + BFL, SCABUFSIZE); + + write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */ + write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */ + } else { + /* async, enable IRQ on rxdata */ + info->ie0_value |= RXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + write_reg(info, CMD, RXENABLE); + + info->rx_overflow = false; + info->rx_enabled = true; +} + +/* Enable the transmitter and send a transmit frame if + * one is loaded in the DMA buffers. + */ +static void tx_start(SLMP_INFO *info) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s tx_start() tx_count=%d\n", + __FILE__,__LINE__, info->device_name,info->tx_count ); + + if (!info->tx_enabled ) { + write_reg(info, CMD, TXRESET); + write_reg(info, CMD, TXENABLE); + info->tx_enabled = true; + } + + if ( info->tx_count ) { + + /* If auto RTS enabled and RTS is inactive, then assert */ + /* RTS and set a flag indicating that the driver should */ + /* negate RTS when the transmission completes. */ + + info->drop_rts_on_tx_done = false; + + if (info->params.mode != MGSL_MODE_ASYNC) { + + if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { + get_signals( info ); + if ( !(info->serial_signals & SerialSignal_RTS) ) { + info->serial_signals |= SerialSignal_RTS; + set_signals( info ); + info->drop_rts_on_tx_done = true; + } + } + + write_reg16(info, TRC0, + (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level)); + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + /* set TX CDA (current descriptor address) */ + write_reg16(info, TXDMA + CDA, + info->tx_buf_list_ex[0].phys_entry); + + /* set TX EDA (last descriptor address) */ + write_reg16(info, TXDMA + EDA, + info->tx_buf_list_ex[info->last_tx_buf].phys_entry); + + /* enable underrun IRQ */ + info->ie1_value &= ~IDLE; + info->ie1_value |= UDRN; + write_reg(info, IE1, info->ie1_value); + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); + + write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */ + write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */ + + mod_timer(&info->tx_timer, jiffies + + msecs_to_jiffies(5000)); + } + else { + tx_load_fifo(info); + /* async, enable IRQ on txdata */ + info->ie0_value |= TXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + info->tx_active = true; + } +} + +/* stop the transmitter and DMA + */ +static void tx_stop( SLMP_INFO *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s tx_stop()\n", + __FILE__,__LINE__, info->device_name ); + + del_timer(&info->tx_timer); + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + write_reg(info, CMD, TXRESET); + + info->ie1_value &= ~(UDRN + IDLE); + write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ + + info->ie0_value &= ~TXRDYE; + write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */ + + info->tx_enabled = false; + info->tx_active = false; +} + +/* Fill the transmit FIFO until the FIFO is full or + * there is no more data to load. + */ +static void tx_load_fifo(SLMP_INFO *info) +{ + u8 TwoBytes[2]; + + /* do nothing is now tx data available and no XON/XOFF pending */ + + if ( !info->tx_count && !info->x_char ) + return; + + /* load the Transmit FIFO until FIFOs full or all data sent */ + + while( info->tx_count && (read_reg(info,SR0) & BIT1) ) { + + /* there is more space in the transmit FIFO and */ + /* there is more data in transmit buffer */ + + if ( (info->tx_count > 1) && !info->x_char ) { + /* write 16-bits */ + TwoBytes[0] = info->tx_buf[info->tx_get++]; + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + TwoBytes[1] = info->tx_buf[info->tx_get++]; + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + + write_reg16(info, TRB, *((u16 *)TwoBytes)); + + info->tx_count -= 2; + info->icount.tx += 2; + } else { + /* only 1 byte left to transmit or 1 FIFO slot left */ + + if (info->x_char) { + /* transmit pending high priority char */ + write_reg(info, TRB, info->x_char); + info->x_char = 0; + } else { + write_reg(info, TRB, info->tx_buf[info->tx_get++]); + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + info->tx_count--; + } + info->icount.tx++; + } + } +} + +/* Reset a port to a known state + */ +static void reset_port(SLMP_INFO *info) +{ + if (info->sca_base) { + + tx_stop(info); + rx_stop(info); + + info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + set_signals(info); + + /* disable all port interrupts */ + info->ie0_value = 0; + info->ie1_value = 0; + info->ie2_value = 0; + write_reg(info, IE0, info->ie0_value); + write_reg(info, IE1, info->ie1_value); + write_reg(info, IE2, info->ie2_value); + + write_reg(info, CMD, CHRESET); + } +} + +/* Reset all the ports to a known state. + */ +static void reset_adapter(SLMP_INFO *info) +{ + int i; + + for ( i=0; i < SCA_MAX_PORTS; ++i) { + if (info->port_array[i]) + reset_port(info->port_array[i]); + } +} + +/* Program port for asynchronous communications. + */ +static void async_mode(SLMP_INFO *info) +{ + + unsigned char RegValue; + + tx_stop(info); + rx_stop(info); + + /* MD0, Mode Register 0 + * + * 07..05 PRCTL<2..0>, Protocol Mode, 000=async + * 04 AUTO, Auto-enable (RTS/CTS/DCD) + * 03 Reserved, must be 0 + * 02 CRCCC, CRC Calculation, 0=disabled + * 01..00 STOP<1..0> Stop bits (00=1,10=2) + * + * 0000 0000 + */ + RegValue = 0x00; + if (info->params.stop_bits != 1) + RegValue |= BIT1; + write_reg(info, MD0, RegValue); + + /* MD1, Mode Register 1 + * + * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64 + * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5 + * 03..02 RXCHR<1..0>, rx char size + * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd + * + * 0100 0000 + */ + RegValue = 0x40; + switch (info->params.data_bits) { + case 7: RegValue |= BIT4 + BIT2; break; + case 6: RegValue |= BIT5 + BIT3; break; + case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break; + } + if (info->params.parity != ASYNC_PARITY_NONE) { + RegValue |= BIT1; + if (info->params.parity == ASYNC_PARITY_ODD) + RegValue |= BIT0; + } + write_reg(info, MD1, RegValue); + + /* MD2, Mode Register 2 + * + * 07..02 Reserved, must be 0 + * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback + * + * 0000 0000 + */ + RegValue = 0x00; + if (info->params.loopback) + RegValue |= (BIT1 + BIT0); + write_reg(info, MD2, RegValue); + + /* RXS, Receive clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=BIT6; + write_reg(info, RXS, RegValue); + + /* TXS, Transmit clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=BIT6; + write_reg(info, TXS, RegValue); + + /* Control Register + * + * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out + */ + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + write_control_reg(info); + + tx_set_idle(info); + + /* RRC Receive Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte + */ + write_reg(info, RRC, 0x00); + + /* TRC0 Transmit Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes + */ + write_reg(info, TRC0, 0x10); + + /* TRC1 Transmit Ready Control 1 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1) + */ + write_reg(info, TRC1, 0x1e); + + /* CTL, MSCI control register + * + * 07..06 Reserved, set to 0 + * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) + * 04 IDLC, idle control, 0=mark 1=idle register + * 03 BRK, break, 0=off 1 =on (async) + * 02 SYNCLD, sync char load enable (BSC) 1=enabled + * 01 GOP, go active on poll (LOOP mode) 1=enabled + * 00 RTS, RTS output control, 0=active 1=inactive + * + * 0001 0001 + */ + RegValue = 0x10; + if (!(info->serial_signals & SerialSignal_RTS)) + RegValue |= 0x01; + write_reg(info, CTL, RegValue); + + /* enable status interrupts */ + info->ie0_value |= TXINTE + RXINTE; + write_reg(info, IE0, info->ie0_value); + + /* enable break detect interrupt */ + info->ie1_value = BRKD; + write_reg(info, IE1, info->ie1_value); + + /* enable rx overrun interrupt */ + info->ie2_value = OVRN; + write_reg(info, IE2, info->ie2_value); + + set_rate( info, info->params.data_rate * 16 ); +} + +/* Program the SCA for HDLC communications. + */ +static void hdlc_mode(SLMP_INFO *info) +{ + unsigned char RegValue; + u32 DpllDivisor; + + // Can't use DPLL because SCA outputs recovered clock on RxC when + // DPLL mode selected. This causes output contention with RxC receiver. + // Use of DPLL would require external hardware to disable RxC receiver + // when DPLL mode selected. + info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL); + + /* disable DMA interrupts */ + write_reg(info, TXDMA + DIR, 0); + write_reg(info, RXDMA + DIR, 0); + + /* MD0, Mode Register 0 + * + * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC + * 04 AUTO, Auto-enable (RTS/CTS/DCD) + * 03 Reserved, must be 0 + * 02 CRCCC, CRC Calculation, 1=enabled + * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16 + * 00 CRC0, CRC initial value, 1 = all 1s + * + * 1000 0001 + */ + RegValue = 0x81; + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + RegValue |= BIT4; + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + RegValue |= BIT4; + if (info->params.crc_type == HDLC_CRC_16_CCITT) + RegValue |= BIT2 + BIT1; + write_reg(info, MD0, RegValue); + + /* MD1, Mode Register 1 + * + * 07..06 ADDRS<1..0>, Address detect, 00=no addr check + * 05..04 TXCHR<1..0>, tx char size, 00=8 bits + * 03..02 RXCHR<1..0>, rx char size, 00=8 bits + * 01..00 PMPM<1..0>, Parity mode, 00=no parity + * + * 0000 0000 + */ + RegValue = 0x00; + write_reg(info, MD1, RegValue); + + /* MD2, Mode Register 2 + * + * 07 NRZFM, 0=NRZ, 1=FM + * 06..05 CODE<1..0> Encoding, 00=NRZ + * 04..03 DRATE<1..0> DPLL Divisor, 00=8 + * 02 Reserved, must be 0 + * 01..00 CNCT<1..0> Channel connection, 0=normal + * + * 0000 0000 + */ + RegValue = 0x00; + switch(info->params.encoding) { + case HDLC_ENCODING_NRZI: RegValue |= BIT5; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */ + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */ + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */ +#if 0 + case HDLC_ENCODING_NRZB: /* not supported */ + case HDLC_ENCODING_NRZI_MARK: /* not supported */ + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */ +#endif + } + if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { + DpllDivisor = 16; + RegValue |= BIT3; + } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { + DpllDivisor = 8; + } else { + DpllDivisor = 32; + RegValue |= BIT4; + } + write_reg(info, MD2, RegValue); + + + /* RXS, Receive clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=0; + if (info->params.flags & HDLC_FLAG_RXC_BRG) + RegValue |= BIT6; + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + RegValue |= BIT6 + BIT5; + write_reg(info, RXS, RegValue); + + /* TXS, Transmit clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=0; + if (info->params.flags & HDLC_FLAG_TXC_BRG) + RegValue |= BIT6; + if (info->params.flags & HDLC_FLAG_TXC_DPLL) + RegValue |= BIT6 + BIT5; + write_reg(info, TXS, RegValue); + + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + set_rate(info, info->params.clock_speed * DpllDivisor); + else + set_rate(info, info->params.clock_speed); + + /* GPDATA (General Purpose I/O Data Register) + * + * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out + */ + if (info->params.flags & HDLC_FLAG_TXC_BRG) + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + else + info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2)); + write_control_reg(info); + + /* RRC Receive Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 RRC<4..0> Rx FIFO trigger active + */ + write_reg(info, RRC, rx_active_fifo_level); + + /* TRC0 Transmit Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger active + */ + write_reg(info, TRC0, tx_active_fifo_level); + + /* TRC1 Transmit Ready Control 1 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full) + */ + write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1)); + + /* DMR, DMA Mode Register + * + * 07..05 Reserved, must be 0 + * 04 TMOD, Transfer Mode: 1=chained-block + * 03 Reserved, must be 0 + * 02 NF, Number of Frames: 1=multi-frame + * 01 CNTE, Frame End IRQ Counter enable: 0=disabled + * 00 Reserved, must be 0 + * + * 0001 0100 + */ + write_reg(info, TXDMA + DMR, 0x14); + write_reg(info, RXDMA + DMR, 0x14); + + /* Set chain pointer base (upper 8 bits of 24 bit addr) */ + write_reg(info, RXDMA + CPB, + (unsigned char)(info->buffer_list_phys >> 16)); + + /* Set chain pointer base (upper 8 bits of 24 bit addr) */ + write_reg(info, TXDMA + CPB, + (unsigned char)(info->buffer_list_phys >> 16)); + + /* enable status interrupts. other code enables/disables + * the individual sources for these two interrupt classes. + */ + info->ie0_value |= TXINTE + RXINTE; + write_reg(info, IE0, info->ie0_value); + + /* CTL, MSCI control register + * + * 07..06 Reserved, set to 0 + * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) + * 04 IDLC, idle control, 0=mark 1=idle register + * 03 BRK, break, 0=off 1 =on (async) + * 02 SYNCLD, sync char load enable (BSC) 1=enabled + * 01 GOP, go active on poll (LOOP mode) 1=enabled + * 00 RTS, RTS output control, 0=active 1=inactive + * + * 0001 0001 + */ + RegValue = 0x10; + if (!(info->serial_signals & SerialSignal_RTS)) + RegValue |= 0x01; + write_reg(info, CTL, RegValue); + + /* preamble not supported ! */ + + tx_set_idle(info); + tx_stop(info); + rx_stop(info); + + set_rate(info, info->params.clock_speed); + + if (info->params.loopback) + enable_loopback(info,1); +} + +/* Set the transmit HDLC idle mode + */ +static void tx_set_idle(SLMP_INFO *info) +{ + unsigned char RegValue = 0xff; + + /* Map API idle mode to SCA register bits */ + switch(info->idle_mode) { + case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break; + case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break; + case HDLC_TXIDLE_ONES: RegValue = 0xff; break; + case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break; + case HDLC_TXIDLE_SPACE: RegValue = 0x00; break; + case HDLC_TXIDLE_MARK: RegValue = 0xff; break; + } + + write_reg(info, IDL, RegValue); +} + +/* Query the adapter for the state of the V24 status (input) signals. + */ +static void get_signals(SLMP_INFO *info) +{ + u16 status = read_reg(info, SR3); + u16 gpstatus = read_status_reg(info); + u16 testbit; + + /* clear all serial signals except DTR and RTS */ + info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; + + /* set serial signal bits to reflect MISR */ + + if (!(status & BIT3)) + info->serial_signals |= SerialSignal_CTS; + + if ( !(status & BIT2)) + info->serial_signals |= SerialSignal_DCD; + + testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7> + if (!(gpstatus & testbit)) + info->serial_signals |= SerialSignal_RI; + + testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6> + if (!(gpstatus & testbit)) + info->serial_signals |= SerialSignal_DSR; +} + +/* Set the state of DTR and RTS based on contents of + * serial_signals member of device context. + */ +static void set_signals(SLMP_INFO *info) +{ + unsigned char RegValue; + u16 EnableBit; + + RegValue = read_reg(info, CTL); + if (info->serial_signals & SerialSignal_RTS) + RegValue &= ~BIT0; + else + RegValue |= BIT0; + write_reg(info, CTL, RegValue); + + // Port 0..3 DTR is ctrl reg <1,3,5,7> + EnableBit = BIT1 << (info->port_num*2); + if (info->serial_signals & SerialSignal_DTR) + info->port_array[0]->ctrlreg_value &= ~EnableBit; + else + info->port_array[0]->ctrlreg_value |= EnableBit; + write_control_reg(info); +} + +/*******************/ +/* DMA Buffer Code */ +/*******************/ + +/* Set the count for all receive buffers to SCABUFSIZE + * and set the current buffer to the first buffer. This effectively + * makes all buffers free and discards any data in buffers. + */ +static void rx_reset_buffers(SLMP_INFO *info) +{ + rx_free_frame_buffers(info, 0, info->rx_buf_count - 1); +} + +/* Free the buffers used by a received frame + * + * info pointer to device instance data + * first index of 1st receive buffer of frame + * last index of last receive buffer of frame + */ +static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) +{ + bool done = false; + + while(!done) { + /* reset current buffer for reuse */ + info->rx_buf_list[first].status = 0xff; + + if (first == last) { + done = true; + /* set new last rx descriptor address */ + write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry); + } + + first++; + if (first == info->rx_buf_count) + first = 0; + } + + /* set current buffer to next buffer after last buffer of frame */ + info->current_rx_buf = first; +} + +/* Return a received frame from the receive DMA buffers. + * Only frames received without errors are returned. + * + * Return Value: true if frame returned, otherwise false + */ +static bool rx_get_frame(SLMP_INFO *info) +{ + unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ + unsigned short status; + unsigned int framesize = 0; + bool ReturnCode = false; + unsigned long flags; + struct tty_struct *tty = info->port.tty; + unsigned char addr_field = 0xff; + SCADESC *desc; + SCADESC_EX *desc_ex; + +CheckAgain: + /* assume no frame returned, set zero length */ + framesize = 0; + addr_field = 0xff; + + /* + * current_rx_buf points to the 1st buffer of the next available + * receive frame. To find the last buffer of the frame look for + * a non-zero status field in the buffer entries. (The status + * field is set by the 16C32 after completing a receive frame. + */ + StartIndex = EndIndex = info->current_rx_buf; + + for ( ;; ) { + desc = &info->rx_buf_list[EndIndex]; + desc_ex = &info->rx_buf_list_ex[EndIndex]; + + if (desc->status == 0xff) + goto Cleanup; /* current desc still in use, no frames available */ + + if (framesize == 0 && info->params.addr_filter != 0xff) + addr_field = desc_ex->virt_addr[0]; + + framesize += desc->length; + + /* Status != 0 means last buffer of frame */ + if (desc->status) + break; + + EndIndex++; + if (EndIndex == info->rx_buf_count) + EndIndex = 0; + + if (EndIndex == info->current_rx_buf) { + /* all buffers have been 'used' but none mark */ + /* the end of a frame. Reset buffers and receiver. */ + if ( info->rx_enabled ){ + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + goto Cleanup; + } + + } + + /* check status of receive frame */ + + /* frame status is byte stored after frame data + * + * 7 EOM (end of msg), 1 = last buffer of frame + * 6 Short Frame, 1 = short frame + * 5 Abort, 1 = frame aborted + * 4 Residue, 1 = last byte is partial + * 3 Overrun, 1 = overrun occurred during frame reception + * 2 CRC, 1 = CRC error detected + * + */ + status = desc->status; + + /* ignore CRC bit if not using CRC (bit is undefined) */ + /* Note:CRC is not save to data buffer */ + if (info->params.crc_type == HDLC_CRC_NONE) + status &= ~BIT2; + + if (framesize == 0 || + (addr_field != 0xff && addr_field != info->params.addr_filter)) { + /* discard 0 byte frames, this seems to occur sometime + * when remote is idling flags. + */ + rx_free_frame_buffers(info, StartIndex, EndIndex); + goto CheckAgain; + } + + if (framesize < 2) + status |= BIT6; + + if (status & (BIT6+BIT5+BIT3+BIT2)) { + /* received frame has errors, + * update counts and mark frame size as 0 + */ + if (status & BIT6) + info->icount.rxshort++; + else if (status & BIT5) + info->icount.rxabort++; + else if (status & BIT3) + info->icount.rxover++; + else + info->icount.rxcrc++; + + framesize = 0; +#if SYNCLINK_GENERIC_HDLC + { + info->netdev->stats.rx_errors++; + info->netdev->stats.rx_frame_errors++; + } +#endif + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr, + min_t(int, framesize,SCABUFSIZE),0); + + if (framesize) { + if (framesize > info->max_frame_size) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous intermediate buffer */ + int copy_count = framesize; + int index = StartIndex; + unsigned char *ptmp = info->tmp_rx_buf; + info->tmp_rx_buf_count = framesize; + + info->icount.rxok++; + + while(copy_count) { + int partial_count = min(copy_count,SCABUFSIZE); + memcpy( ptmp, + info->rx_buf_list_ex[index].virt_addr, + partial_count ); + ptmp += partial_count; + copy_count -= partial_count; + + if ( ++index == info->rx_buf_count ) + index = 0; + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_rx(info,info->tmp_rx_buf,framesize); + else +#endif + ldisc_receive_buf(tty,info->tmp_rx_buf, + info->flag_buf, framesize); + } + } + /* Free the buffers used by this frame. */ + rx_free_frame_buffers( info, StartIndex, EndIndex ); + + ReturnCode = true; + +Cleanup: + if ( info->rx_enabled && info->rx_overflow ) { + /* Receiver is enabled, but needs to restarted due to + * rx buffer overflow. If buffers are empty, restart receiver. + */ + if (info->rx_buf_list[EndIndex].status == 0xff) { + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + } + + return ReturnCode; +} + +/* load the transmit DMA buffer with data + */ +static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) +{ + unsigned short copy_count; + unsigned int i = 0; + SCADESC *desc; + SCADESC_EX *desc_ex; + + if ( debug_level >= DEBUG_LEVEL_DATA ) + trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1); + + /* Copy source buffer to one or more DMA buffers, starting with + * the first transmit dma buffer. + */ + for(i=0;;) + { + copy_count = min_t(unsigned short,count,SCABUFSIZE); + + desc = &info->tx_buf_list[i]; + desc_ex = &info->tx_buf_list_ex[i]; + + load_pci_memory(info, desc_ex->virt_addr,buf,copy_count); + + desc->length = copy_count; + desc->status = 0; + + buf += copy_count; + count -= copy_count; + + if (!count) + break; + + i++; + if (i >= info->tx_buf_count) + i = 0; + } + + info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */ + info->last_tx_buf = ++i; +} + +static bool register_test(SLMP_INFO *info) +{ + static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96}; + static unsigned int count = ARRAY_SIZE(testval); + unsigned int i; + bool rc = true; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + + /* assume failure */ + info->init_error = DiagStatus_AddressFailure; + + /* Write bit patterns to various registers but do it out of */ + /* sync, then read back and verify values. */ + + for (i = 0 ; i < count ; i++) { + write_reg(info, TMC, testval[i]); + write_reg(info, IDL, testval[(i+1)%count]); + write_reg(info, SA0, testval[(i+2)%count]); + write_reg(info, SA1, testval[(i+3)%count]); + + if ( (read_reg(info, TMC) != testval[i]) || + (read_reg(info, IDL) != testval[(i+1)%count]) || + (read_reg(info, SA0) != testval[(i+2)%count]) || + (read_reg(info, SA1) != testval[(i+3)%count]) ) + { + rc = false; + break; + } + } + + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +static bool irq_test(SLMP_INFO *info) +{ + unsigned long timeout; + unsigned long flags; + + unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + + /* assume failure */ + info->init_error = DiagStatus_IrqFailure; + info->irq_occurred = false; + + /* setup timer0 on SCA0 to interrupt */ + + /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */ + write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4)); + + write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */ + write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */ + + + /* TMCS, Timer Control/Status Register + * + * 07 CMF, Compare match flag (read only) 1=match + * 06 ECMI, CMF Interrupt Enable: 1=enabled + * 05 Reserved, must be 0 + * 04 TME, Timer Enable + * 03..00 Reserved, must be 0 + * + * 0101 0000 + */ + write_reg(info, (unsigned char)(timer + TMCS), 0x50); + + spin_unlock_irqrestore(&info->lock,flags); + + timeout=100; + while( timeout-- && !info->irq_occurred ) { + msleep_interruptible(10); + } + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + return info->irq_occurred; +} + +/* initialize individual SCA device (2 ports) + */ +static bool sca_init(SLMP_INFO *info) +{ + /* set wait controller to single mem partition (low), no wait states */ + write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */ + write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */ + write_reg(info, WCRL, 0); /* wait controller low range */ + write_reg(info, WCRM, 0); /* wait controller mid range */ + write_reg(info, WCRH, 0); /* wait controller high range */ + + /* DPCR, DMA Priority Control + * + * 07..05 Not used, must be 0 + * 04 BRC, bus release condition: 0=all transfers complete + * 03 CCC, channel change condition: 0=every cycle + * 02..00 PR<2..0>, priority 100=round robin + * + * 00000100 = 0x04 + */ + write_reg(info, DPCR, dma_priority); + + /* DMA Master Enable, BIT7: 1=enable all channels */ + write_reg(info, DMER, 0x80); + + /* enable all interrupt classes */ + write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */ + write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */ + write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */ + + /* ITCR, interrupt control register + * 07 IPC, interrupt priority, 0=MSCI->DMA + * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle + * 04 VOS, Vector Output, 0=unmodified vector + * 03..00 Reserved, must be 0 + */ + write_reg(info, ITCR, 0); + + return true; +} + +/* initialize adapter hardware + */ +static bool init_adapter(SLMP_INFO *info) +{ + int i; + + /* Set BIT30 of Local Control Reg 0x50 to reset SCA */ + volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); + u32 readval; + + info->misc_ctrl_value |= BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* + * Force at least 170ns delay before clearing + * reset bit. Each read from LCR takes at least + * 30ns so 10 times for 300ns to be safe. + */ + for(i=0;i<10;i++) + readval = *MiscCtrl; + + info->misc_ctrl_value &= ~BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* init control reg (all DTRs off, all clksel=input) */ + info->ctrlreg_value = 0xaa; + write_control_reg(info); + + { + volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c); + lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3); + + switch(read_ahead_count) + { + case 16: + lcr1_brdr_value |= BIT5 + BIT4 + BIT3; + break; + case 8: + lcr1_brdr_value |= BIT5 + BIT4; + break; + case 4: + lcr1_brdr_value |= BIT5 + BIT3; + break; + case 0: + lcr1_brdr_value |= BIT5; + break; + } + + *LCR1BRDR = lcr1_brdr_value; + *MiscCtrl = misc_ctrl_value; + } + + sca_init(info->port_array[0]); + sca_init(info->port_array[2]); + + return true; +} + +/* Loopback an HDLC frame to test the hardware + * interrupt and DMA functions. + */ +static bool loopback_test(SLMP_INFO *info) +{ +#define TESTFRAMESIZE 20 + + unsigned long timeout; + u16 count = TESTFRAMESIZE; + unsigned char buf[TESTFRAMESIZE]; + bool rc = false; + unsigned long flags; + + struct tty_struct *oldtty = info->port.tty; + u32 speed = info->params.clock_speed; + + info->params.clock_speed = 3686400; + info->port.tty = NULL; + + /* assume failure */ + info->init_error = DiagStatus_DmaFailure; + + /* build and send transmit frame */ + for (count = 0; count < TESTFRAMESIZE;++count) + buf[count] = (unsigned char)count; + + memset(info->tmp_rx_buf,0,TESTFRAMESIZE); + + /* program hardware for HDLC and enabled receiver */ + spin_lock_irqsave(&info->lock,flags); + hdlc_mode(info); + enable_loopback(info,1); + rx_start(info); + info->tx_count = count; + tx_load_dma_buffer(info,buf,count); + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + + /* wait for receive complete */ + /* Set a timeout for waiting for interrupt. */ + for ( timeout = 100; timeout; --timeout ) { + msleep_interruptible(10); + + if (rx_get_frame(info)) { + rc = true; + break; + } + } + + /* verify received frame length and contents */ + if (rc && + ( info->tmp_rx_buf_count != count || + memcmp(buf, info->tmp_rx_buf,count))) { + rc = false; + } + + spin_lock_irqsave(&info->lock,flags); + reset_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->params.clock_speed = speed; + info->port.tty = oldtty; + + return rc; +} + +/* Perform diagnostics on hardware + */ +static int adapter_test( SLMP_INFO *info ) +{ + unsigned long flags; + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):Testing device %s\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->lock,flags); + init_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->port_array[0]->port_count = 0; + + if ( register_test(info->port_array[0]) && + register_test(info->port_array[1])) { + + info->port_array[0]->port_count = 2; + + if ( register_test(info->port_array[2]) && + register_test(info->port_array[3]) ) + info->port_array[0]->port_count += 2; + } + else { + printk( "%s(%d):Register test failure for device %s Addr=%08lX\n", + __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base)); + return -ENODEV; + } + + if ( !irq_test(info->port_array[0]) || + !irq_test(info->port_array[1]) || + (info->port_count == 4 && !irq_test(info->port_array[2])) || + (info->port_count == 4 && !irq_test(info->port_array[3]))) { + printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); + return -ENODEV; + } + + if (!loopback_test(info->port_array[0]) || + !loopback_test(info->port_array[1]) || + (info->port_count == 4 && !loopback_test(info->port_array[2])) || + (info->port_count == 4 && !loopback_test(info->port_array[3]))) { + printk( "%s(%d):DMA test failure for device %s\n", + __FILE__,__LINE__,info->device_name); + return -ENODEV; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):device %s passed diagnostics\n", + __FILE__,__LINE__,info->device_name ); + + info->port_array[0]->init_error = 0; + info->port_array[1]->init_error = 0; + if ( info->port_count > 2 ) { + info->port_array[2]->init_error = 0; + info->port_array[3]->init_error = 0; + } + + return 0; +} + +/* Test the shared memory on a PCI adapter. + */ +static bool memory_test(SLMP_INFO *info) +{ + static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; + unsigned long count = ARRAY_SIZE(testval); + unsigned long i; + unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long); + unsigned long * addr = (unsigned long *)info->memory_base; + + /* Test data lines with test pattern at one location. */ + + for ( i = 0 ; i < count ; i++ ) { + *addr = testval[i]; + if ( *addr != testval[i] ) + return false; + } + + /* Test address lines with incrementing pattern over */ + /* entire address range. */ + + for ( i = 0 ; i < limit ; i++ ) { + *addr = i * 4; + addr++; + } + + addr = (unsigned long *)info->memory_base; + + for ( i = 0 ; i < limit ; i++ ) { + if ( *addr != i * 4 ) + return false; + addr++; + } + + memset( info->memory_base, 0, SCA_MEM_SIZE ); + return true; +} + +/* Load data into PCI adapter shared memory. + * + * The PCI9050 releases control of the local bus + * after completing the current read or write operation. + * + * While the PCI9050 write FIFO not empty, the + * PCI9050 treats all of the writes as a single transaction + * and does not release the bus. This causes DMA latency problems + * at high speeds when copying large data blocks to the shared memory. + * + * This function breaks a write into multiple transations by + * interleaving a read which flushes the write FIFO and 'completes' + * the write transation. This allows any pending DMA request to gain control + * of the local bus in a timely fasion. + */ +static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) +{ + /* A load interval of 16 allows for 4 32-bit writes at */ + /* 136ns each for a maximum latency of 542ns on the local bus.*/ + + unsigned short interval = count / sca_pci_load_interval; + unsigned short i; + + for ( i = 0 ; i < interval ; i++ ) + { + memcpy(dest, src, sca_pci_load_interval); + read_status_reg(info); + dest += sca_pci_load_interval; + src += sca_pci_load_interval; + } + + memcpy(dest, src, count % sca_pci_load_interval); +} + +static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) +{ + int i; + int linecount; + if (xmit) + printk("%s tx data:\n",info->device_name); + else + printk("%s rx data:\n",info->device_name); + + while(count) { + if (count > 16) + linecount = 16; + else + linecount = count; + + for(i=0;i=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + + data += linecount; + count -= linecount; + } +} /* end of trace_block() */ + +/* called when HDLC frame times out + * update stats and do tx completion processing + */ +static void tx_timeout(unsigned long context) +{ + SLMP_INFO *info = (SLMP_INFO*)context; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s tx_timeout()\n", + __FILE__,__LINE__,info->device_name); + if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->lock,flags); + info->tx_active = false; + info->tx_count = info->tx_put = info->tx_get = 0; + + spin_unlock_irqrestore(&info->lock,flags); + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + bh_transmit(info); +} + +/* called to periodically check the DSR/RI modem signal input status + */ +static void status_timeout(unsigned long context) +{ + u16 status = 0; + SLMP_INFO *info = (SLMP_INFO*)context; + unsigned long flags; + unsigned char delta; + + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + /* check for DSR/RI state change */ + + delta = info->old_signals ^ info->serial_signals; + info->old_signals = info->serial_signals; + + if (delta & SerialSignal_DSR) + status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR); + + if (delta & SerialSignal_RI) + status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI); + + if (delta & SerialSignal_DCD) + status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD); + + if (delta & SerialSignal_CTS) + status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS); + + if (status) + isr_io_pin(info,status); + + mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); +} + + +/* Register Access Routines - + * All registers are memory mapped + */ +#define CALC_REGADDR() \ + unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \ + if (info->port_num > 1) \ + RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \ + if ( info->port_num & 1) { \ + if (Addr > 0x7f) \ + RegAddr += 0x40; /* DMA access */ \ + else if (Addr > 0x1f && Addr < 0x60) \ + RegAddr += 0x20; /* MSCI access */ \ + } + + +static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) +{ + CALC_REGADDR(); + return *RegAddr; +} +static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) +{ + CALC_REGADDR(); + *RegAddr = Value; +} + +static u16 read_reg16(SLMP_INFO * info, unsigned char Addr) +{ + CALC_REGADDR(); + return *((u16 *)RegAddr); +} + +static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) +{ + CALC_REGADDR(); + *((u16 *)RegAddr) = Value; +} + +static unsigned char read_status_reg(SLMP_INFO * info) +{ + unsigned char *RegAddr = (unsigned char *)info->statctrl_base; + return *RegAddr; +} + +static void write_control_reg(SLMP_INFO * info) +{ + unsigned char *RegAddr = (unsigned char *)info->statctrl_base; + *RegAddr = info->port_array[0]->ctrlreg_value; +} + + +static int __devinit synclinkmp_init_one (struct pci_dev *dev, + const struct pci_device_id *ent) +{ + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + device_init( ++synclinkmp_adapter_count, dev ); + return 0; +} + +static void __devexit synclinkmp_remove_one (struct pci_dev *dev) +{ +} -- cgit v1.2.2 From 282361a046edd9d58a134f358a3f65a7cb8655d9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 22 Feb 2011 16:23:22 -0800 Subject: tty: move ipwireless driver from drivers/char/pcmcia/ to drivers/tty/ As planned by Arnd Bergmann, this moves the ipwireless driver to the drivers/tty/ directory as that's where it really belongs. Cc: Arnd Bergmann Cc: Alan Cox Cc: Jiri Slaby Cc: David Sterba Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- drivers/char/pcmcia/ipwireless/Makefile | 10 - drivers/char/pcmcia/ipwireless/hardware.c | 1764 ----------------------- drivers/char/pcmcia/ipwireless/hardware.h | 62 - drivers/char/pcmcia/ipwireless/main.c | 335 ----- drivers/char/pcmcia/ipwireless/main.h | 68 - drivers/char/pcmcia/ipwireless/network.c | 508 ------- drivers/char/pcmcia/ipwireless/network.h | 53 - drivers/char/pcmcia/ipwireless/setup_protocol.h | 108 -- drivers/char/pcmcia/ipwireless/tty.c | 679 --------- drivers/char/pcmcia/ipwireless/tty.h | 45 - drivers/tty/Makefile | 2 + drivers/tty/ipwireless/Makefile | 10 + drivers/tty/ipwireless/hardware.c | 1764 +++++++++++++++++++++++ drivers/tty/ipwireless/hardware.h | 62 + drivers/tty/ipwireless/main.c | 335 +++++ drivers/tty/ipwireless/main.h | 68 + drivers/tty/ipwireless/network.c | 508 +++++++ drivers/tty/ipwireless/network.h | 53 + drivers/tty/ipwireless/setup_protocol.h | 108 ++ drivers/tty/ipwireless/tty.c | 679 +++++++++ drivers/tty/ipwireless/tty.h | 45 + 22 files changed, 3635 insertions(+), 3633 deletions(-) delete mode 100644 drivers/char/pcmcia/ipwireless/Makefile delete mode 100644 drivers/char/pcmcia/ipwireless/hardware.c delete mode 100644 drivers/char/pcmcia/ipwireless/hardware.h delete mode 100644 drivers/char/pcmcia/ipwireless/main.c delete mode 100644 drivers/char/pcmcia/ipwireless/main.h delete mode 100644 drivers/char/pcmcia/ipwireless/network.c delete mode 100644 drivers/char/pcmcia/ipwireless/network.h delete mode 100644 drivers/char/pcmcia/ipwireless/setup_protocol.h delete mode 100644 drivers/char/pcmcia/ipwireless/tty.c delete mode 100644 drivers/char/pcmcia/ipwireless/tty.h create mode 100644 drivers/tty/ipwireless/Makefile create mode 100644 drivers/tty/ipwireless/hardware.c create mode 100644 drivers/tty/ipwireless/hardware.h create mode 100644 drivers/tty/ipwireless/main.c create mode 100644 drivers/tty/ipwireless/main.h create mode 100644 drivers/tty/ipwireless/network.c create mode 100644 drivers/tty/ipwireless/network.h create mode 100644 drivers/tty/ipwireless/setup_protocol.h create mode 100644 drivers/tty/ipwireless/tty.c create mode 100644 drivers/tty/ipwireless/tty.h diff --git a/MAINTAINERS b/MAINTAINERS index 1eaeda66a525..e39337a1b958 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3423,7 +3423,7 @@ M: Jiri Kosina M: David Sterba S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git -F: drivers/char/pcmcia/ipwireless/ +F: drivers/tty/ipwireless/ IPX NETWORK LAYER M: Arnaldo Carvalho de Melo diff --git a/drivers/char/pcmcia/ipwireless/Makefile b/drivers/char/pcmcia/ipwireless/Makefile deleted file mode 100644 index db80873d7f20..000000000000 --- a/drivers/char/pcmcia/ipwireless/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# drivers/char/pcmcia/ipwireless/Makefile -# -# Makefile for the IPWireless driver -# - -obj-$(CONFIG_IPWIRELESS) += ipwireless.o - -ipwireless-y := hardware.o main.o network.o tty.o - diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c deleted file mode 100644 index 0aeb5a38d296..000000000000 --- a/drivers/char/pcmcia/ipwireless/hardware.c +++ /dev/null @@ -1,1764 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#include -#include -#include -#include -#include -#include - -#include "hardware.h" -#include "setup_protocol.h" -#include "network.h" -#include "main.h" - -static void ipw_send_setup_packet(struct ipw_hardware *hw); -static void handle_received_SETUP_packet(struct ipw_hardware *ipw, - unsigned int address, - const unsigned char *data, int len, - int is_last); -static void ipwireless_setup_timer(unsigned long data); -static void handle_received_CTRL_packet(struct ipw_hardware *hw, - unsigned int channel_idx, const unsigned char *data, int len); - -/*#define TIMING_DIAGNOSTICS*/ - -#ifdef TIMING_DIAGNOSTICS - -static struct timing_stats { - unsigned long last_report_time; - unsigned long read_time; - unsigned long write_time; - unsigned long read_bytes; - unsigned long write_bytes; - unsigned long start_time; -}; - -static void start_timing(void) -{ - timing_stats.start_time = jiffies; -} - -static void end_read_timing(unsigned length) -{ - timing_stats.read_time += (jiffies - start_time); - timing_stats.read_bytes += length + 2; - report_timing(); -} - -static void end_write_timing(unsigned length) -{ - timing_stats.write_time += (jiffies - start_time); - timing_stats.write_bytes += length + 2; - report_timing(); -} - -static void report_timing(void) -{ - unsigned long since = jiffies - timing_stats.last_report_time; - - /* If it's been more than one second... */ - if (since >= HZ) { - int first = (timing_stats.last_report_time == 0); - - timing_stats.last_report_time = jiffies; - if (!first) - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": %u us elapsed - read %lu bytes in %u us, wrote %lu bytes in %u us\n", - jiffies_to_usecs(since), - timing_stats.read_bytes, - jiffies_to_usecs(timing_stats.read_time), - timing_stats.write_bytes, - jiffies_to_usecs(timing_stats.write_time)); - - timing_stats.read_time = 0; - timing_stats.write_time = 0; - timing_stats.read_bytes = 0; - timing_stats.write_bytes = 0; - } -} -#else -static void start_timing(void) { } -static void end_read_timing(unsigned length) { } -static void end_write_timing(unsigned length) { } -#endif - -/* Imported IPW definitions */ - -#define LL_MTU_V1 318 -#define LL_MTU_V2 250 -#define LL_MTU_MAX (LL_MTU_V1 > LL_MTU_V2 ? LL_MTU_V1 : LL_MTU_V2) - -#define PRIO_DATA 2 -#define PRIO_CTRL 1 -#define PRIO_SETUP 0 - -/* Addresses */ -#define ADDR_SETUP_PROT 0 - -/* Protocol ids */ -enum { - /* Identifier for the Com Data protocol */ - TL_PROTOCOLID_COM_DATA = 0, - - /* Identifier for the Com Control protocol */ - TL_PROTOCOLID_COM_CTRL = 1, - - /* Identifier for the Setup protocol */ - TL_PROTOCOLID_SETUP = 2 -}; - -/* Number of bytes in NL packet header (cannot do - * sizeof(nl_packet_header) since it's a bitfield) */ -#define NL_FIRST_PACKET_HEADER_SIZE 3 - -/* Number of bytes in NL packet header (cannot do - * sizeof(nl_packet_header) since it's a bitfield) */ -#define NL_FOLLOWING_PACKET_HEADER_SIZE 1 - -struct nl_first_packet_header { - unsigned char protocol:3; - unsigned char address:3; - unsigned char packet_rank:2; - unsigned char length_lsb; - unsigned char length_msb; -}; - -struct nl_packet_header { - unsigned char protocol:3; - unsigned char address:3; - unsigned char packet_rank:2; -}; - -/* Value of 'packet_rank' above */ -#define NL_INTERMEDIATE_PACKET 0x0 -#define NL_LAST_PACKET 0x1 -#define NL_FIRST_PACKET 0x2 - -union nl_packet { - /* Network packet header of the first packet (a special case) */ - struct nl_first_packet_header hdr_first; - /* Network packet header of the following packets (if any) */ - struct nl_packet_header hdr; - /* Complete network packet (header + data) */ - unsigned char rawpkt[LL_MTU_MAX]; -} __attribute__ ((__packed__)); - -#define HW_VERSION_UNKNOWN -1 -#define HW_VERSION_1 1 -#define HW_VERSION_2 2 - -/* IPW I/O ports */ -#define IOIER 0x00 /* Interrupt Enable Register */ -#define IOIR 0x02 /* Interrupt Source/ACK register */ -#define IODCR 0x04 /* Data Control Register */ -#define IODRR 0x06 /* Data Read Register */ -#define IODWR 0x08 /* Data Write Register */ -#define IOESR 0x0A /* Embedded Driver Status Register */ -#define IORXR 0x0C /* Rx Fifo Register (Host to Embedded) */ -#define IOTXR 0x0E /* Tx Fifo Register (Embedded to Host) */ - -/* I/O ports and bit definitions for version 1 of the hardware */ - -/* IER bits*/ -#define IER_RXENABLED 0x1 -#define IER_TXENABLED 0x2 - -/* ISR bits */ -#define IR_RXINTR 0x1 -#define IR_TXINTR 0x2 - -/* DCR bits */ -#define DCR_RXDONE 0x1 -#define DCR_TXDONE 0x2 -#define DCR_RXRESET 0x4 -#define DCR_TXRESET 0x8 - -/* I/O ports and bit definitions for version 2 of the hardware */ - -struct MEMCCR { - unsigned short reg_config_option; /* PCCOR: Configuration Option Register */ - unsigned short reg_config_and_status; /* PCCSR: Configuration and Status Register */ - unsigned short reg_pin_replacement; /* PCPRR: Pin Replacemant Register */ - unsigned short reg_socket_and_copy; /* PCSCR: Socket and Copy Register */ - unsigned short reg_ext_status; /* PCESR: Extendend Status Register */ - unsigned short reg_io_base; /* PCIOB: I/O Base Register */ -}; - -struct MEMINFREG { - unsigned short memreg_tx_old; /* TX Register (R/W) */ - unsigned short pad1; - unsigned short memreg_rx_done; /* RXDone Register (R/W) */ - unsigned short pad2; - unsigned short memreg_rx; /* RX Register (R/W) */ - unsigned short pad3; - unsigned short memreg_pc_interrupt_ack; /* PC intr Ack Register (W) */ - unsigned short pad4; - unsigned long memreg_card_present;/* Mask for Host to check (R) for - * CARD_PRESENT_VALUE */ - unsigned short memreg_tx_new; /* TX2 (new) Register (R/W) */ -}; - -#define CARD_PRESENT_VALUE (0xBEEFCAFEUL) - -#define MEMTX_TX 0x0001 -#define MEMRX_RX 0x0001 -#define MEMRX_RX_DONE 0x0001 -#define MEMRX_PCINTACKK 0x0001 - -#define NL_NUM_OF_PRIORITIES 3 -#define NL_NUM_OF_PROTOCOLS 3 -#define NL_NUM_OF_ADDRESSES NO_OF_IPW_CHANNELS - -struct ipw_hardware { - unsigned int base_port; - short hw_version; - unsigned short ll_mtu; - spinlock_t lock; - - int initializing; - int init_loops; - struct timer_list setup_timer; - - /* Flag if hw is ready to send next packet */ - int tx_ready; - /* Count of pending packets to be sent */ - int tx_queued; - struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; - - int rx_bytes_queued; - struct list_head rx_queue; - /* Pool of rx_packet structures that are not currently used. */ - struct list_head rx_pool; - int rx_pool_size; - /* True if reception of data is blocked while userspace processes it. */ - int blocking_rx; - /* True if there is RX data ready on the hardware. */ - int rx_ready; - unsigned short last_memtx_serial; - /* - * Newer versions of the V2 card firmware send serial numbers in the - * MemTX register. 'serial_number_detected' is set true when we detect - * a non-zero serial number (indicating the new firmware). Thereafter, - * the driver can safely ignore the Timer Recovery re-sends to avoid - * out-of-sync problems. - */ - int serial_number_detected; - struct work_struct work_rx; - - /* True if we are to send the set-up data to the hardware. */ - int to_setup; - - /* Card has been removed */ - int removed; - /* Saved irq value when we disable the interrupt. */ - int irq; - /* True if this driver is shutting down. */ - int shutting_down; - /* Modem control lines */ - unsigned int control_lines[NL_NUM_OF_ADDRESSES]; - struct ipw_rx_packet *packet_assembler[NL_NUM_OF_ADDRESSES]; - - struct tasklet_struct tasklet; - - /* The handle for the network layer, for the sending of events to it. */ - struct ipw_network *network; - struct MEMINFREG __iomem *memory_info_regs; - struct MEMCCR __iomem *memregs_CCR; - void (*reboot_callback) (void *data); - void *reboot_callback_data; - - unsigned short __iomem *memreg_tx; -}; - -/* - * Packet info structure for tx packets. - * Note: not all the fields defined here are required for all protocols - */ -struct ipw_tx_packet { - struct list_head queue; - /* channel idx + 1 */ - unsigned char dest_addr; - /* SETUP, CTRL or DATA */ - unsigned char protocol; - /* Length of data block, which starts at the end of this structure */ - unsigned short length; - /* Sending state */ - /* Offset of where we've sent up to so far */ - unsigned long offset; - /* Count of packet fragments, starting at 0 */ - int fragment_count; - - /* Called after packet is sent and before is freed */ - void (*packet_callback) (void *cb_data, unsigned int packet_length); - void *callback_data; -}; - -/* Signals from DTE */ -#define COMCTRL_RTS 0 -#define COMCTRL_DTR 1 - -/* Signals from DCE */ -#define COMCTRL_CTS 2 -#define COMCTRL_DCD 3 -#define COMCTRL_DSR 4 -#define COMCTRL_RI 5 - -struct ipw_control_packet_body { - /* DTE signal or DCE signal */ - unsigned char sig_no; - /* 0: set signal, 1: clear signal */ - unsigned char value; -} __attribute__ ((__packed__)); - -struct ipw_control_packet { - struct ipw_tx_packet header; - struct ipw_control_packet_body body; -}; - -struct ipw_rx_packet { - struct list_head queue; - unsigned int capacity; - unsigned int length; - unsigned int protocol; - unsigned int channel_idx; -}; - -static char *data_type(const unsigned char *buf, unsigned length) -{ - struct nl_packet_header *hdr = (struct nl_packet_header *) buf; - - if (length == 0) - return " "; - - if (hdr->packet_rank & NL_FIRST_PACKET) { - switch (hdr->protocol) { - case TL_PROTOCOLID_COM_DATA: return "DATA "; - case TL_PROTOCOLID_COM_CTRL: return "CTRL "; - case TL_PROTOCOLID_SETUP: return "SETUP"; - default: return "???? "; - } - } else - return " "; -} - -#define DUMP_MAX_BYTES 64 - -static void dump_data_bytes(const char *type, const unsigned char *data, - unsigned length) -{ - char prefix[56]; - - sprintf(prefix, IPWIRELESS_PCCARD_NAME ": %s %s ", - type, data_type(data, length)); - print_hex_dump_bytes(prefix, 0, (void *)data, - length < DUMP_MAX_BYTES ? length : DUMP_MAX_BYTES); -} - -static void swap_packet_bitfield_to_le(unsigned char *data) -{ -#ifdef __BIG_ENDIAN_BITFIELD - unsigned char tmp = *data, ret = 0; - - /* - * transform bits from aa.bbb.ccc to ccc.bbb.aa - */ - ret |= tmp & 0xc0 >> 6; - ret |= tmp & 0x38 >> 1; - ret |= tmp & 0x07 << 5; - *data = ret & 0xff; -#endif -} - -static void swap_packet_bitfield_from_le(unsigned char *data) -{ -#ifdef __BIG_ENDIAN_BITFIELD - unsigned char tmp = *data, ret = 0; - - /* - * transform bits from ccc.bbb.aa to aa.bbb.ccc - */ - ret |= tmp & 0xe0 >> 5; - ret |= tmp & 0x1c << 1; - ret |= tmp & 0x03 << 6; - *data = ret & 0xff; -#endif -} - -static void do_send_fragment(struct ipw_hardware *hw, unsigned char *data, - unsigned length) -{ - unsigned i; - unsigned long flags; - - start_timing(); - BUG_ON(length > hw->ll_mtu); - - if (ipwireless_debug) - dump_data_bytes("send", data, length); - - spin_lock_irqsave(&hw->lock, flags); - - hw->tx_ready = 0; - swap_packet_bitfield_to_le(data); - - if (hw->hw_version == HW_VERSION_1) { - outw((unsigned short) length, hw->base_port + IODWR); - - for (i = 0; i < length; i += 2) { - unsigned short d = data[i]; - __le16 raw_data; - - if (i + 1 < length) - d |= data[i + 1] << 8; - raw_data = cpu_to_le16(d); - outw(raw_data, hw->base_port + IODWR); - } - - outw(DCR_TXDONE, hw->base_port + IODCR); - } else if (hw->hw_version == HW_VERSION_2) { - outw((unsigned short) length, hw->base_port); - - for (i = 0; i < length; i += 2) { - unsigned short d = data[i]; - __le16 raw_data; - - if (i + 1 < length) - d |= data[i + 1] << 8; - raw_data = cpu_to_le16(d); - outw(raw_data, hw->base_port); - } - while ((i & 3) != 2) { - outw((unsigned short) 0xDEAD, hw->base_port); - i += 2; - } - writew(MEMRX_RX, &hw->memory_info_regs->memreg_rx); - } - - spin_unlock_irqrestore(&hw->lock, flags); - - end_write_timing(length); -} - -static void do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet) -{ - unsigned short fragment_data_len; - unsigned short data_left = packet->length - packet->offset; - unsigned short header_size; - union nl_packet pkt; - - header_size = - (packet->fragment_count == 0) - ? NL_FIRST_PACKET_HEADER_SIZE - : NL_FOLLOWING_PACKET_HEADER_SIZE; - fragment_data_len = hw->ll_mtu - header_size; - if (data_left < fragment_data_len) - fragment_data_len = data_left; - - /* - * hdr_first is now in machine bitfield order, which will be swapped - * to le just before it goes to hw - */ - pkt.hdr_first.protocol = packet->protocol; - pkt.hdr_first.address = packet->dest_addr; - pkt.hdr_first.packet_rank = 0; - - /* First packet? */ - if (packet->fragment_count == 0) { - pkt.hdr_first.packet_rank |= NL_FIRST_PACKET; - pkt.hdr_first.length_lsb = (unsigned char) packet->length; - pkt.hdr_first.length_msb = - (unsigned char) (packet->length >> 8); - } - - memcpy(pkt.rawpkt + header_size, - ((unsigned char *) packet) + sizeof(struct ipw_tx_packet) + - packet->offset, fragment_data_len); - packet->offset += fragment_data_len; - packet->fragment_count++; - - /* Last packet? (May also be first packet.) */ - if (packet->offset == packet->length) - pkt.hdr_first.packet_rank |= NL_LAST_PACKET; - do_send_fragment(hw, pkt.rawpkt, header_size + fragment_data_len); - - /* If this packet has unsent data, then re-queue it. */ - if (packet->offset < packet->length) { - /* - * Re-queue it at the head of the highest priority queue so - * it goes before all other packets - */ - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - list_add(&packet->queue, &hw->tx_queue[0]); - hw->tx_queued++; - spin_unlock_irqrestore(&hw->lock, flags); - } else { - if (packet->packet_callback) - packet->packet_callback(packet->callback_data, - packet->length); - kfree(packet); - } -} - -static void ipw_setup_hardware(struct ipw_hardware *hw) -{ - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - if (hw->hw_version == HW_VERSION_1) { - /* Reset RX FIFO */ - outw(DCR_RXRESET, hw->base_port + IODCR); - /* SB: Reset TX FIFO */ - outw(DCR_TXRESET, hw->base_port + IODCR); - - /* Enable TX and RX interrupts. */ - outw(IER_TXENABLED | IER_RXENABLED, hw->base_port + IOIER); - } else { - /* - * Set INTRACK bit (bit 0), which means we must explicitly - * acknowledge interrupts by clearing bit 2 of reg_config_and_status. - */ - unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status); - - csr |= 1; - writew(csr, &hw->memregs_CCR->reg_config_and_status); - } - spin_unlock_irqrestore(&hw->lock, flags); -} - -/* - * If 'packet' is NULL, then this function allocates a new packet, setting its - * length to 0 and ensuring it has the specified minimum amount of free space. - * - * If 'packet' is not NULL, then this function enlarges it if it doesn't - * have the specified minimum amount of free space. - * - */ -static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw, - struct ipw_rx_packet *packet, - int minimum_free_space) -{ - - if (!packet) { - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - if (!list_empty(&hw->rx_pool)) { - packet = list_first_entry(&hw->rx_pool, - struct ipw_rx_packet, queue); - hw->rx_pool_size--; - spin_unlock_irqrestore(&hw->lock, flags); - list_del(&packet->queue); - } else { - const int min_capacity = - ipwireless_ppp_mru(hw->network) + 2; - int new_capacity; - - spin_unlock_irqrestore(&hw->lock, flags); - new_capacity = - (minimum_free_space > min_capacity - ? minimum_free_space - : min_capacity); - packet = kmalloc(sizeof(struct ipw_rx_packet) - + new_capacity, GFP_ATOMIC); - if (!packet) - return NULL; - packet->capacity = new_capacity; - } - packet->length = 0; - } - - if (packet->length + minimum_free_space > packet->capacity) { - struct ipw_rx_packet *old_packet = packet; - - packet = kmalloc(sizeof(struct ipw_rx_packet) + - old_packet->length + minimum_free_space, - GFP_ATOMIC); - if (!packet) { - kfree(old_packet); - return NULL; - } - memcpy(packet, old_packet, - sizeof(struct ipw_rx_packet) - + old_packet->length); - packet->capacity = old_packet->length + minimum_free_space; - kfree(old_packet); - } - - return packet; -} - -static void pool_free(struct ipw_hardware *hw, struct ipw_rx_packet *packet) -{ - if (hw->rx_pool_size > 6) - kfree(packet); - else { - hw->rx_pool_size++; - list_add(&packet->queue, &hw->rx_pool); - } -} - -static void queue_received_packet(struct ipw_hardware *hw, - unsigned int protocol, - unsigned int address, - const unsigned char *data, int length, - int is_last) -{ - unsigned int channel_idx = address - 1; - struct ipw_rx_packet *packet = NULL; - unsigned long flags; - - /* Discard packet if channel index is out of range. */ - if (channel_idx >= NL_NUM_OF_ADDRESSES) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": data packet has bad address %u\n", address); - return; - } - - /* - * ->packet_assembler is safe to touch unlocked, this is the only place - */ - if (protocol == TL_PROTOCOLID_COM_DATA) { - struct ipw_rx_packet **assem = - &hw->packet_assembler[channel_idx]; - - /* - * Create a new packet, or assembler already contains one - * enlarge it by 'length' bytes. - */ - (*assem) = pool_allocate(hw, *assem, length); - if (!(*assem)) { - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": no memory for incomming data packet, dropped!\n"); - return; - } - (*assem)->protocol = protocol; - (*assem)->channel_idx = channel_idx; - - /* Append this packet data onto existing data. */ - memcpy((unsigned char *)(*assem) + - sizeof(struct ipw_rx_packet) - + (*assem)->length, data, length); - (*assem)->length += length; - if (is_last) { - packet = *assem; - *assem = NULL; - /* Count queued DATA bytes only */ - spin_lock_irqsave(&hw->lock, flags); - hw->rx_bytes_queued += packet->length; - spin_unlock_irqrestore(&hw->lock, flags); - } - } else { - /* If it's a CTRL packet, don't assemble, just queue it. */ - packet = pool_allocate(hw, NULL, length); - if (!packet) { - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": no memory for incomming ctrl packet, dropped!\n"); - return; - } - packet->protocol = protocol; - packet->channel_idx = channel_idx; - memcpy((unsigned char *)packet + sizeof(struct ipw_rx_packet), - data, length); - packet->length = length; - } - - /* - * If this is the last packet, then send the assembled packet on to the - * network layer. - */ - if (packet) { - spin_lock_irqsave(&hw->lock, flags); - list_add_tail(&packet->queue, &hw->rx_queue); - /* Block reception of incoming packets if queue is full. */ - hw->blocking_rx = - (hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE); - - spin_unlock_irqrestore(&hw->lock, flags); - schedule_work(&hw->work_rx); - } -} - -/* - * Workqueue callback - */ -static void ipw_receive_data_work(struct work_struct *work_rx) -{ - struct ipw_hardware *hw = - container_of(work_rx, struct ipw_hardware, work_rx); - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - while (!list_empty(&hw->rx_queue)) { - struct ipw_rx_packet *packet = - list_first_entry(&hw->rx_queue, - struct ipw_rx_packet, queue); - - if (hw->shutting_down) - break; - list_del(&packet->queue); - - /* - * Note: ipwireless_network_packet_received must be called in a - * process context (i.e. via schedule_work) because the tty - * output code can sleep in the tty_flip_buffer_push call. - */ - if (packet->protocol == TL_PROTOCOLID_COM_DATA) { - if (hw->network != NULL) { - /* If the network hasn't been disconnected. */ - spin_unlock_irqrestore(&hw->lock, flags); - /* - * This must run unlocked due to tty processing - * and mutex locking - */ - ipwireless_network_packet_received( - hw->network, - packet->channel_idx, - (unsigned char *)packet - + sizeof(struct ipw_rx_packet), - packet->length); - spin_lock_irqsave(&hw->lock, flags); - } - /* Count queued DATA bytes only */ - hw->rx_bytes_queued -= packet->length; - } else { - /* - * This is safe to be called locked, callchain does - * not block - */ - handle_received_CTRL_packet(hw, packet->channel_idx, - (unsigned char *)packet - + sizeof(struct ipw_rx_packet), - packet->length); - } - pool_free(hw, packet); - /* - * Unblock reception of incoming packets if queue is no longer - * full. - */ - hw->blocking_rx = - hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE; - if (hw->shutting_down) - break; - } - spin_unlock_irqrestore(&hw->lock, flags); -} - -static void handle_received_CTRL_packet(struct ipw_hardware *hw, - unsigned int channel_idx, - const unsigned char *data, int len) -{ - const struct ipw_control_packet_body *body = - (const struct ipw_control_packet_body *) data; - unsigned int changed_mask; - - if (len != sizeof(struct ipw_control_packet_body)) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": control packet was %d bytes - wrong size!\n", - len); - return; - } - - switch (body->sig_no) { - case COMCTRL_CTS: - changed_mask = IPW_CONTROL_LINE_CTS; - break; - case COMCTRL_DCD: - changed_mask = IPW_CONTROL_LINE_DCD; - break; - case COMCTRL_DSR: - changed_mask = IPW_CONTROL_LINE_DSR; - break; - case COMCTRL_RI: - changed_mask = IPW_CONTROL_LINE_RI; - break; - default: - changed_mask = 0; - } - - if (changed_mask != 0) { - if (body->value) - hw->control_lines[channel_idx] |= changed_mask; - else - hw->control_lines[channel_idx] &= ~changed_mask; - if (hw->network) - ipwireless_network_notify_control_line_change( - hw->network, - channel_idx, - hw->control_lines[channel_idx], - changed_mask); - } -} - -static void handle_received_packet(struct ipw_hardware *hw, - const union nl_packet *packet, - unsigned short len) -{ - unsigned int protocol = packet->hdr.protocol; - unsigned int address = packet->hdr.address; - unsigned int header_length; - const unsigned char *data; - unsigned int data_len; - int is_last = packet->hdr.packet_rank & NL_LAST_PACKET; - - if (packet->hdr.packet_rank & NL_FIRST_PACKET) - header_length = NL_FIRST_PACKET_HEADER_SIZE; - else - header_length = NL_FOLLOWING_PACKET_HEADER_SIZE; - - data = packet->rawpkt + header_length; - data_len = len - header_length; - switch (protocol) { - case TL_PROTOCOLID_COM_DATA: - case TL_PROTOCOLID_COM_CTRL: - queue_received_packet(hw, protocol, address, data, data_len, - is_last); - break; - case TL_PROTOCOLID_SETUP: - handle_received_SETUP_packet(hw, address, data, data_len, - is_last); - break; - } -} - -static void acknowledge_data_read(struct ipw_hardware *hw) -{ - if (hw->hw_version == HW_VERSION_1) - outw(DCR_RXDONE, hw->base_port + IODCR); - else - writew(MEMRX_PCINTACKK, - &hw->memory_info_regs->memreg_pc_interrupt_ack); -} - -/* - * Retrieve a packet from the IPW hardware. - */ -static void do_receive_packet(struct ipw_hardware *hw) -{ - unsigned len; - unsigned i; - unsigned char pkt[LL_MTU_MAX]; - - start_timing(); - - if (hw->hw_version == HW_VERSION_1) { - len = inw(hw->base_port + IODRR); - if (len > hw->ll_mtu) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": received a packet of %u bytes - longer than the MTU!\n", len); - outw(DCR_RXDONE | DCR_RXRESET, hw->base_port + IODCR); - return; - } - - for (i = 0; i < len; i += 2) { - __le16 raw_data = inw(hw->base_port + IODRR); - unsigned short data = le16_to_cpu(raw_data); - - pkt[i] = (unsigned char) data; - pkt[i + 1] = (unsigned char) (data >> 8); - } - } else { - len = inw(hw->base_port); - if (len > hw->ll_mtu) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": received a packet of %u bytes - longer than the MTU!\n", len); - writew(MEMRX_PCINTACKK, - &hw->memory_info_regs->memreg_pc_interrupt_ack); - return; - } - - for (i = 0; i < len; i += 2) { - __le16 raw_data = inw(hw->base_port); - unsigned short data = le16_to_cpu(raw_data); - - pkt[i] = (unsigned char) data; - pkt[i + 1] = (unsigned char) (data >> 8); - } - - while ((i & 3) != 2) { - inw(hw->base_port); - i += 2; - } - } - - acknowledge_data_read(hw); - - swap_packet_bitfield_from_le(pkt); - - if (ipwireless_debug) - dump_data_bytes("recv", pkt, len); - - handle_received_packet(hw, (union nl_packet *) pkt, len); - - end_read_timing(len); -} - -static int get_current_packet_priority(struct ipw_hardware *hw) -{ - /* - * If we're initializing, don't send anything of higher priority than - * PRIO_SETUP. The network layer therefore need not care about - * hardware initialization - any of its stuff will simply be queued - * until setup is complete. - */ - return (hw->to_setup || hw->initializing - ? PRIO_SETUP + 1 : NL_NUM_OF_PRIORITIES); -} - -/* - * return 1 if something has been received from hw - */ -static int get_packets_from_hw(struct ipw_hardware *hw) -{ - int received = 0; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - while (hw->rx_ready && !hw->blocking_rx) { - received = 1; - hw->rx_ready--; - spin_unlock_irqrestore(&hw->lock, flags); - - do_receive_packet(hw); - - spin_lock_irqsave(&hw->lock, flags); - } - spin_unlock_irqrestore(&hw->lock, flags); - - return received; -} - -/* - * Send pending packet up to given priority, prioritize SETUP data until - * hardware is fully setup. - * - * return 1 if more packets can be sent - */ -static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) -{ - int more_to_send = 0; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - if (hw->tx_queued && hw->tx_ready) { - int priority; - struct ipw_tx_packet *packet = NULL; - - /* Pick a packet */ - for (priority = 0; priority < priority_limit; priority++) { - if (!list_empty(&hw->tx_queue[priority])) { - packet = list_first_entry( - &hw->tx_queue[priority], - struct ipw_tx_packet, - queue); - - hw->tx_queued--; - list_del(&packet->queue); - - break; - } - } - if (!packet) { - hw->tx_queued = 0; - spin_unlock_irqrestore(&hw->lock, flags); - return 0; - } - - spin_unlock_irqrestore(&hw->lock, flags); - - /* Send */ - do_send_packet(hw, packet); - - /* Check if more to send */ - spin_lock_irqsave(&hw->lock, flags); - for (priority = 0; priority < priority_limit; priority++) - if (!list_empty(&hw->tx_queue[priority])) { - more_to_send = 1; - break; - } - - if (!more_to_send) - hw->tx_queued = 0; - } - spin_unlock_irqrestore(&hw->lock, flags); - - return more_to_send; -} - -/* - * Send and receive all queued packets. - */ -static void ipwireless_do_tasklet(unsigned long hw_) -{ - struct ipw_hardware *hw = (struct ipw_hardware *) hw_; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - if (hw->shutting_down) { - spin_unlock_irqrestore(&hw->lock, flags); - return; - } - - if (hw->to_setup == 1) { - /* - * Initial setup data sent to hardware - */ - hw->to_setup = 2; - spin_unlock_irqrestore(&hw->lock, flags); - - ipw_setup_hardware(hw); - ipw_send_setup_packet(hw); - - send_pending_packet(hw, PRIO_SETUP + 1); - get_packets_from_hw(hw); - } else { - int priority_limit = get_current_packet_priority(hw); - int again; - - spin_unlock_irqrestore(&hw->lock, flags); - - do { - again = send_pending_packet(hw, priority_limit); - again |= get_packets_from_hw(hw); - } while (again); - } -} - -/* - * return true if the card is physically present. - */ -static int is_card_present(struct ipw_hardware *hw) -{ - if (hw->hw_version == HW_VERSION_1) - return inw(hw->base_port + IOIR) != 0xFFFF; - else - return readl(&hw->memory_info_regs->memreg_card_present) == - CARD_PRESENT_VALUE; -} - -static irqreturn_t ipwireless_handle_v1_interrupt(int irq, - struct ipw_hardware *hw) -{ - unsigned short irqn; - - irqn = inw(hw->base_port + IOIR); - - /* Check if card is present */ - if (irqn == 0xFFFF) - return IRQ_NONE; - else if (irqn != 0) { - unsigned short ack = 0; - unsigned long flags; - - /* Transmit complete. */ - if (irqn & IR_TXINTR) { - ack |= IR_TXINTR; - spin_lock_irqsave(&hw->lock, flags); - hw->tx_ready = 1; - spin_unlock_irqrestore(&hw->lock, flags); - } - /* Received data */ - if (irqn & IR_RXINTR) { - ack |= IR_RXINTR; - spin_lock_irqsave(&hw->lock, flags); - hw->rx_ready++; - spin_unlock_irqrestore(&hw->lock, flags); - } - if (ack != 0) { - outw(ack, hw->base_port + IOIR); - tasklet_schedule(&hw->tasklet); - } - return IRQ_HANDLED; - } - return IRQ_NONE; -} - -static void acknowledge_pcmcia_interrupt(struct ipw_hardware *hw) -{ - unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status); - - csr &= 0xfffd; - writew(csr, &hw->memregs_CCR->reg_config_and_status); -} - -static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq, - struct ipw_hardware *hw) -{ - int tx = 0; - int rx = 0; - int rx_repeat = 0; - int try_mem_tx_old; - unsigned long flags; - - do { - - unsigned short memtx = readw(hw->memreg_tx); - unsigned short memtx_serial; - unsigned short memrxdone = - readw(&hw->memory_info_regs->memreg_rx_done); - - try_mem_tx_old = 0; - - /* check whether the interrupt was generated by ipwireless card */ - if (!(memtx & MEMTX_TX) && !(memrxdone & MEMRX_RX_DONE)) { - - /* check if the card uses memreg_tx_old register */ - if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { - memtx = readw(&hw->memory_info_regs->memreg_tx_old); - if (memtx & MEMTX_TX) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": Using memreg_tx_old\n"); - hw->memreg_tx = - &hw->memory_info_regs->memreg_tx_old; - } else { - return IRQ_NONE; - } - } else - return IRQ_NONE; - } - - /* - * See if the card is physically present. Note that while it is - * powering up, it appears not to be present. - */ - if (!is_card_present(hw)) { - acknowledge_pcmcia_interrupt(hw); - return IRQ_HANDLED; - } - - memtx_serial = memtx & (unsigned short) 0xff00; - if (memtx & MEMTX_TX) { - writew(memtx_serial, hw->memreg_tx); - - if (hw->serial_number_detected) { - if (memtx_serial != hw->last_memtx_serial) { - hw->last_memtx_serial = memtx_serial; - spin_lock_irqsave(&hw->lock, flags); - hw->rx_ready++; - spin_unlock_irqrestore(&hw->lock, flags); - rx = 1; - } else - /* Ignore 'Timer Recovery' duplicates. */ - rx_repeat = 1; - } else { - /* - * If a non-zero serial number is seen, then enable - * serial number checking. - */ - if (memtx_serial != 0) { - hw->serial_number_detected = 1; - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME - ": memreg_tx serial num detected\n"); - - spin_lock_irqsave(&hw->lock, flags); - hw->rx_ready++; - spin_unlock_irqrestore(&hw->lock, flags); - } - rx = 1; - } - } - if (memrxdone & MEMRX_RX_DONE) { - writew(0, &hw->memory_info_regs->memreg_rx_done); - spin_lock_irqsave(&hw->lock, flags); - hw->tx_ready = 1; - spin_unlock_irqrestore(&hw->lock, flags); - tx = 1; - } - if (tx) - writew(MEMRX_PCINTACKK, - &hw->memory_info_regs->memreg_pc_interrupt_ack); - - acknowledge_pcmcia_interrupt(hw); - - if (tx || rx) - tasklet_schedule(&hw->tasklet); - else if (!rx_repeat) { - if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { - if (hw->serial_number_detected) - printk(KERN_WARNING IPWIRELESS_PCCARD_NAME - ": spurious interrupt - new_tx mode\n"); - else { - printk(KERN_WARNING IPWIRELESS_PCCARD_NAME - ": no valid memreg_tx value - switching to the old memreg_tx\n"); - hw->memreg_tx = - &hw->memory_info_regs->memreg_tx_old; - try_mem_tx_old = 1; - } - } else - printk(KERN_WARNING IPWIRELESS_PCCARD_NAME - ": spurious interrupt - old_tx mode\n"); - } - - } while (try_mem_tx_old == 1); - - return IRQ_HANDLED; -} - -irqreturn_t ipwireless_interrupt(int irq, void *dev_id) -{ - struct ipw_dev *ipw = dev_id; - - if (ipw->hardware->hw_version == HW_VERSION_1) - return ipwireless_handle_v1_interrupt(irq, ipw->hardware); - else - return ipwireless_handle_v2_v3_interrupt(irq, ipw->hardware); -} - -static void flush_packets_to_hw(struct ipw_hardware *hw) -{ - int priority_limit; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - priority_limit = get_current_packet_priority(hw); - spin_unlock_irqrestore(&hw->lock, flags); - - while (send_pending_packet(hw, priority_limit)); -} - -static void send_packet(struct ipw_hardware *hw, int priority, - struct ipw_tx_packet *packet) -{ - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - list_add_tail(&packet->queue, &hw->tx_queue[priority]); - hw->tx_queued++; - spin_unlock_irqrestore(&hw->lock, flags); - - flush_packets_to_hw(hw); -} - -/* Create data packet, non-atomic allocation */ -static void *alloc_data_packet(int data_size, - unsigned char dest_addr, - unsigned char protocol) -{ - struct ipw_tx_packet *packet = kzalloc( - sizeof(struct ipw_tx_packet) + data_size, - GFP_ATOMIC); - - if (!packet) - return NULL; - - INIT_LIST_HEAD(&packet->queue); - packet->dest_addr = dest_addr; - packet->protocol = protocol; - packet->length = data_size; - - return packet; -} - -static void *alloc_ctrl_packet(int header_size, - unsigned char dest_addr, - unsigned char protocol, - unsigned char sig_no) -{ - /* - * sig_no is located right after ipw_tx_packet struct in every - * CTRL or SETUP packets, we can use ipw_control_packet as a - * common struct - */ - struct ipw_control_packet *packet = kzalloc(header_size, GFP_ATOMIC); - - if (!packet) - return NULL; - - INIT_LIST_HEAD(&packet->header.queue); - packet->header.dest_addr = dest_addr; - packet->header.protocol = protocol; - packet->header.length = header_size - sizeof(struct ipw_tx_packet); - packet->body.sig_no = sig_no; - - return packet; -} - -int ipwireless_send_packet(struct ipw_hardware *hw, unsigned int channel_idx, - const unsigned char *data, unsigned int length, - void (*callback) (void *cb, unsigned int length), - void *callback_data) -{ - struct ipw_tx_packet *packet; - - packet = alloc_data_packet(length, (channel_idx + 1), - TL_PROTOCOLID_COM_DATA); - if (!packet) - return -ENOMEM; - packet->packet_callback = callback; - packet->callback_data = callback_data; - memcpy((unsigned char *) packet + sizeof(struct ipw_tx_packet), data, - length); - - send_packet(hw, PRIO_DATA, packet); - return 0; -} - -static int set_control_line(struct ipw_hardware *hw, int prio, - unsigned int channel_idx, int line, int state) -{ - struct ipw_control_packet *packet; - int protocolid = TL_PROTOCOLID_COM_CTRL; - - if (prio == PRIO_SETUP) - protocolid = TL_PROTOCOLID_SETUP; - - packet = alloc_ctrl_packet(sizeof(struct ipw_control_packet), - (channel_idx + 1), protocolid, line); - if (!packet) - return -ENOMEM; - packet->header.length = sizeof(struct ipw_control_packet_body); - packet->body.value = (state == 0 ? 0 : 1); - send_packet(hw, prio, &packet->header); - return 0; -} - - -static int set_DTR(struct ipw_hardware *hw, int priority, - unsigned int channel_idx, int state) -{ - if (state != 0) - hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_DTR; - else - hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_DTR; - - return set_control_line(hw, priority, channel_idx, COMCTRL_DTR, state); -} - -static int set_RTS(struct ipw_hardware *hw, int priority, - unsigned int channel_idx, int state) -{ - if (state != 0) - hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_RTS; - else - hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_RTS; - - return set_control_line(hw, priority, channel_idx, COMCTRL_RTS, state); -} - -int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx, - int state) -{ - return set_DTR(hw, PRIO_CTRL, channel_idx, state); -} - -int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx, - int state) -{ - return set_RTS(hw, PRIO_CTRL, channel_idx, state); -} - -struct ipw_setup_get_version_query_packet { - struct ipw_tx_packet header; - struct tl_setup_get_version_qry body; -}; - -struct ipw_setup_config_packet { - struct ipw_tx_packet header; - struct tl_setup_config_msg body; -}; - -struct ipw_setup_config_done_packet { - struct ipw_tx_packet header; - struct tl_setup_config_done_msg body; -}; - -struct ipw_setup_open_packet { - struct ipw_tx_packet header; - struct tl_setup_open_msg body; -}; - -struct ipw_setup_info_packet { - struct ipw_tx_packet header; - struct tl_setup_info_msg body; -}; - -struct ipw_setup_reboot_msg_ack { - struct ipw_tx_packet header; - struct TlSetupRebootMsgAck body; -}; - -/* This handles the actual initialization of the card */ -static void __handle_setup_get_version_rsp(struct ipw_hardware *hw) -{ - struct ipw_setup_config_packet *config_packet; - struct ipw_setup_config_done_packet *config_done_packet; - struct ipw_setup_open_packet *open_packet; - struct ipw_setup_info_packet *info_packet; - int port; - unsigned int channel_idx; - - /* generate config packet */ - for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) { - config_packet = alloc_ctrl_packet( - sizeof(struct ipw_setup_config_packet), - ADDR_SETUP_PROT, - TL_PROTOCOLID_SETUP, - TL_SETUP_SIGNO_CONFIG_MSG); - if (!config_packet) - goto exit_nomem; - config_packet->header.length = sizeof(struct tl_setup_config_msg); - config_packet->body.port_no = port; - config_packet->body.prio_data = PRIO_DATA; - config_packet->body.prio_ctrl = PRIO_CTRL; - send_packet(hw, PRIO_SETUP, &config_packet->header); - } - config_done_packet = alloc_ctrl_packet( - sizeof(struct ipw_setup_config_done_packet), - ADDR_SETUP_PROT, - TL_PROTOCOLID_SETUP, - TL_SETUP_SIGNO_CONFIG_DONE_MSG); - if (!config_done_packet) - goto exit_nomem; - config_done_packet->header.length = sizeof(struct tl_setup_config_done_msg); - send_packet(hw, PRIO_SETUP, &config_done_packet->header); - - /* generate open packet */ - for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) { - open_packet = alloc_ctrl_packet( - sizeof(struct ipw_setup_open_packet), - ADDR_SETUP_PROT, - TL_PROTOCOLID_SETUP, - TL_SETUP_SIGNO_OPEN_MSG); - if (!open_packet) - goto exit_nomem; - open_packet->header.length = sizeof(struct tl_setup_open_msg); - open_packet->body.port_no = port; - send_packet(hw, PRIO_SETUP, &open_packet->header); - } - for (channel_idx = 0; - channel_idx < NL_NUM_OF_ADDRESSES; channel_idx++) { - int ret; - - ret = set_DTR(hw, PRIO_SETUP, channel_idx, - (hw->control_lines[channel_idx] & - IPW_CONTROL_LINE_DTR) != 0); - if (ret) { - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": error setting DTR (%d)\n", ret); - return; - } - - set_RTS(hw, PRIO_SETUP, channel_idx, - (hw->control_lines [channel_idx] & - IPW_CONTROL_LINE_RTS) != 0); - if (ret) { - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": error setting RTS (%d)\n", ret); - return; - } - } - /* - * For NDIS we assume that we are using sync PPP frames, for COM async. - * This driver uses NDIS mode too. We don't bother with translation - * from async -> sync PPP. - */ - info_packet = alloc_ctrl_packet(sizeof(struct ipw_setup_info_packet), - ADDR_SETUP_PROT, - TL_PROTOCOLID_SETUP, - TL_SETUP_SIGNO_INFO_MSG); - if (!info_packet) - goto exit_nomem; - info_packet->header.length = sizeof(struct tl_setup_info_msg); - info_packet->body.driver_type = NDISWAN_DRIVER; - info_packet->body.major_version = NDISWAN_DRIVER_MAJOR_VERSION; - info_packet->body.minor_version = NDISWAN_DRIVER_MINOR_VERSION; - send_packet(hw, PRIO_SETUP, &info_packet->header); - - /* Initialization is now complete, so we clear the 'to_setup' flag */ - hw->to_setup = 0; - - return; - -exit_nomem: - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": not enough memory to alloc control packet\n"); - hw->to_setup = -1; -} - -static void handle_setup_get_version_rsp(struct ipw_hardware *hw, - unsigned char vers_no) -{ - del_timer(&hw->setup_timer); - hw->initializing = 0; - printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": card is ready.\n"); - - if (vers_no == TL_SETUP_VERSION) - __handle_setup_get_version_rsp(hw); - else - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": invalid hardware version no %u\n", - (unsigned int) vers_no); -} - -static void ipw_send_setup_packet(struct ipw_hardware *hw) -{ - struct ipw_setup_get_version_query_packet *ver_packet; - - ver_packet = alloc_ctrl_packet( - sizeof(struct ipw_setup_get_version_query_packet), - ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, - TL_SETUP_SIGNO_GET_VERSION_QRY); - ver_packet->header.length = sizeof(struct tl_setup_get_version_qry); - - /* - * Response is handled in handle_received_SETUP_packet - */ - send_packet(hw, PRIO_SETUP, &ver_packet->header); -} - -static void handle_received_SETUP_packet(struct ipw_hardware *hw, - unsigned int address, - const unsigned char *data, int len, - int is_last) -{ - const union ipw_setup_rx_msg *rx_msg = (const union ipw_setup_rx_msg *) data; - - if (address != ADDR_SETUP_PROT) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": setup packet has bad address %d\n", address); - return; - } - - switch (rx_msg->sig_no) { - case TL_SETUP_SIGNO_GET_VERSION_RSP: - if (hw->to_setup) - handle_setup_get_version_rsp(hw, - rx_msg->version_rsp_msg.version); - break; - - case TL_SETUP_SIGNO_OPEN_MSG: - if (ipwireless_debug) { - unsigned int channel_idx = rx_msg->open_msg.port_no - 1; - - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": OPEN_MSG [channel %u] reply received\n", - channel_idx); - } - break; - - case TL_SETUP_SIGNO_INFO_MSG_ACK: - if (ipwireless_debug) - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME - ": card successfully configured as NDISWAN\n"); - break; - - case TL_SETUP_SIGNO_REBOOT_MSG: - if (hw->to_setup) - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME - ": Setup not completed - ignoring reboot msg\n"); - else { - struct ipw_setup_reboot_msg_ack *packet; - - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME - ": Acknowledging REBOOT message\n"); - packet = alloc_ctrl_packet( - sizeof(struct ipw_setup_reboot_msg_ack), - ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, - TL_SETUP_SIGNO_REBOOT_MSG_ACK); - packet->header.length = - sizeof(struct TlSetupRebootMsgAck); - send_packet(hw, PRIO_SETUP, &packet->header); - if (hw->reboot_callback) - hw->reboot_callback(hw->reboot_callback_data); - } - break; - - default: - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": unknown setup message %u received\n", - (unsigned int) rx_msg->sig_no); - } -} - -static void do_close_hardware(struct ipw_hardware *hw) -{ - unsigned int irqn; - - if (hw->hw_version == HW_VERSION_1) { - /* Disable TX and RX interrupts. */ - outw(0, hw->base_port + IOIER); - - /* Acknowledge any outstanding interrupt requests */ - irqn = inw(hw->base_port + IOIR); - if (irqn & IR_TXINTR) - outw(IR_TXINTR, hw->base_port + IOIR); - if (irqn & IR_RXINTR) - outw(IR_RXINTR, hw->base_port + IOIR); - - synchronize_irq(hw->irq); - } -} - -struct ipw_hardware *ipwireless_hardware_create(void) -{ - int i; - struct ipw_hardware *hw = - kzalloc(sizeof(struct ipw_hardware), GFP_KERNEL); - - if (!hw) - return NULL; - - hw->irq = -1; - hw->initializing = 1; - hw->tx_ready = 1; - hw->rx_bytes_queued = 0; - hw->rx_pool_size = 0; - hw->last_memtx_serial = (unsigned short) 0xffff; - for (i = 0; i < NL_NUM_OF_PRIORITIES; i++) - INIT_LIST_HEAD(&hw->tx_queue[i]); - - INIT_LIST_HEAD(&hw->rx_queue); - INIT_LIST_HEAD(&hw->rx_pool); - spin_lock_init(&hw->lock); - tasklet_init(&hw->tasklet, ipwireless_do_tasklet, (unsigned long) hw); - INIT_WORK(&hw->work_rx, ipw_receive_data_work); - setup_timer(&hw->setup_timer, ipwireless_setup_timer, - (unsigned long) hw); - - return hw; -} - -void ipwireless_init_hardware_v1(struct ipw_hardware *hw, - unsigned int base_port, - void __iomem *attr_memory, - void __iomem *common_memory, - int is_v2_card, - void (*reboot_callback) (void *data), - void *reboot_callback_data) -{ - if (hw->removed) { - hw->removed = 0; - enable_irq(hw->irq); - } - hw->base_port = base_port; - hw->hw_version = (is_v2_card ? HW_VERSION_2 : HW_VERSION_1); - hw->ll_mtu = (hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2); - hw->memregs_CCR = (struct MEMCCR __iomem *) - ((unsigned short __iomem *) attr_memory + 0x200); - hw->memory_info_regs = (struct MEMINFREG __iomem *) common_memory; - hw->memreg_tx = &hw->memory_info_regs->memreg_tx_new; - hw->reboot_callback = reboot_callback; - hw->reboot_callback_data = reboot_callback_data; -} - -void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw) -{ - hw->initializing = 1; - hw->init_loops = 0; - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": waiting for card to start up...\n"); - ipwireless_setup_timer((unsigned long) hw); -} - -static void ipwireless_setup_timer(unsigned long data) -{ - struct ipw_hardware *hw = (struct ipw_hardware *) data; - - hw->init_loops++; - - if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY && - hw->hw_version == HW_VERSION_2 && - hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": failed to startup using TX2, trying TX\n"); - - hw->memreg_tx = &hw->memory_info_regs->memreg_tx_old; - hw->init_loops = 0; - } - /* Give up after a certain number of retries */ - if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": card failed to start up!\n"); - hw->initializing = 0; - } else { - /* Do not attempt to write to the board if it is not present. */ - if (is_card_present(hw)) { - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - hw->to_setup = 1; - hw->tx_ready = 1; - spin_unlock_irqrestore(&hw->lock, flags); - tasklet_schedule(&hw->tasklet); - } - - mod_timer(&hw->setup_timer, - jiffies + msecs_to_jiffies(TL_SETUP_VERSION_QRY_TMO)); - } -} - -/* - * Stop any interrupts from executing so that, once this function returns, - * other layers of the driver can be sure they won't get any more callbacks. - * Thus must be called on a proper process context. - */ -void ipwireless_stop_interrupts(struct ipw_hardware *hw) -{ - if (!hw->shutting_down) { - /* Tell everyone we are going down. */ - hw->shutting_down = 1; - del_timer(&hw->setup_timer); - - /* Prevent the hardware from sending any more interrupts */ - do_close_hardware(hw); - } -} - -void ipwireless_hardware_free(struct ipw_hardware *hw) -{ - int i; - struct ipw_rx_packet *rp, *rq; - struct ipw_tx_packet *tp, *tq; - - ipwireless_stop_interrupts(hw); - - flush_work_sync(&hw->work_rx); - - for (i = 0; i < NL_NUM_OF_ADDRESSES; i++) - if (hw->packet_assembler[i] != NULL) - kfree(hw->packet_assembler[i]); - - for (i = 0; i < NL_NUM_OF_PRIORITIES; i++) - list_for_each_entry_safe(tp, tq, &hw->tx_queue[i], queue) { - list_del(&tp->queue); - kfree(tp); - } - - list_for_each_entry_safe(rp, rq, &hw->rx_queue, queue) { - list_del(&rp->queue); - kfree(rp); - } - - list_for_each_entry_safe(rp, rq, &hw->rx_pool, queue) { - list_del(&rp->queue); - kfree(rp); - } - kfree(hw); -} - -/* - * Associate the specified network with this hardware, so it will receive events - * from it. - */ -void ipwireless_associate_network(struct ipw_hardware *hw, - struct ipw_network *network) -{ - hw->network = network; -} diff --git a/drivers/char/pcmcia/ipwireless/hardware.h b/drivers/char/pcmcia/ipwireless/hardware.h deleted file mode 100644 index 90a8590e43b0..000000000000 --- a/drivers/char/pcmcia/ipwireless/hardware.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#ifndef _IPWIRELESS_CS_HARDWARE_H_ -#define _IPWIRELESS_CS_HARDWARE_H_ - -#include -#include -#include - -#define IPW_CONTROL_LINE_CTS 0x0001 -#define IPW_CONTROL_LINE_DCD 0x0002 -#define IPW_CONTROL_LINE_DSR 0x0004 -#define IPW_CONTROL_LINE_RI 0x0008 -#define IPW_CONTROL_LINE_DTR 0x0010 -#define IPW_CONTROL_LINE_RTS 0x0020 - -struct ipw_hardware; -struct ipw_network; - -struct ipw_hardware *ipwireless_hardware_create(void); -void ipwireless_hardware_free(struct ipw_hardware *hw); -irqreturn_t ipwireless_interrupt(int irq, void *dev_id); -int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx, - int state); -int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx, - int state); -int ipwireless_send_packet(struct ipw_hardware *hw, - unsigned int channel_idx, - const unsigned char *data, - unsigned int length, - void (*packet_sent_callback) (void *cb, - unsigned int length), - void *sent_cb_data); -void ipwireless_associate_network(struct ipw_hardware *hw, - struct ipw_network *net); -void ipwireless_stop_interrupts(struct ipw_hardware *hw); -void ipwireless_init_hardware_v1(struct ipw_hardware *hw, - unsigned int base_port, - void __iomem *attr_memory, - void __iomem *common_memory, - int is_v2_card, - void (*reboot_cb) (void *data), - void *reboot_cb_data); -void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw); -void ipwireless_sleep(unsigned int tenths); - -#endif diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c deleted file mode 100644 index 94b8eb4d691d..000000000000 --- a/drivers/char/pcmcia/ipwireless/main.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#include "hardware.h" -#include "network.h" -#include "main.h" -#include "tty.h" - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -static struct pcmcia_device_id ipw_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), - PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0200), - PCMCIA_DEVICE_NULL -}; -MODULE_DEVICE_TABLE(pcmcia, ipw_ids); - -static void ipwireless_detach(struct pcmcia_device *link); - -/* - * Module params - */ -/* Debug mode: more verbose, print sent/recv bytes */ -int ipwireless_debug; -int ipwireless_loopback; -int ipwireless_out_queue = 10; - -module_param_named(debug, ipwireless_debug, int, 0); -module_param_named(loopback, ipwireless_loopback, int, 0); -module_param_named(out_queue, ipwireless_out_queue, int, 0); -MODULE_PARM_DESC(debug, "switch on debug messages [0]"); -MODULE_PARM_DESC(loopback, - "debug: enable ras_raw channel [0]"); -MODULE_PARM_DESC(out_queue, "debug: set size of outgoing PPP queue [10]"); - -/* Executes in process context. */ -static void signalled_reboot_work(struct work_struct *work_reboot) -{ - struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev, - work_reboot); - struct pcmcia_device *link = ipw->link; - pcmcia_reset_card(link->socket); -} - -static void signalled_reboot_callback(void *callback_data) -{ - struct ipw_dev *ipw = (struct ipw_dev *) callback_data; - - /* Delegate to process context. */ - schedule_work(&ipw->work_reboot); -} - -static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) -{ - struct ipw_dev *ipw = priv_data; - struct resource *io_resource; - int ret; - - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - - /* 0x40 causes it to generate level mode interrupts. */ - /* 0x04 enables IREQ pin. */ - p_dev->config_index |= 0x44; - p_dev->io_lines = 16; - ret = pcmcia_request_io(p_dev); - if (ret) - return ret; - - io_resource = request_region(p_dev->resource[0]->start, - resource_size(p_dev->resource[0]), - IPWIRELESS_PCCARD_NAME); - - p_dev->resource[2]->flags |= - WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; - - ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0); - if (ret != 0) - goto exit1; - - ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); - if (ret != 0) - goto exit2; - - ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; - - ipw->attr_memory = ioremap(p_dev->resource[2]->start, - resource_size(p_dev->resource[2])); - request_mem_region(p_dev->resource[2]->start, - resource_size(p_dev->resource[2]), - IPWIRELESS_PCCARD_NAME); - - p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | - WIN_ENABLE; - p_dev->resource[3]->end = 0; /* this used to be 0x1000 */ - ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0); - if (ret != 0) - goto exit2; - - ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0); - if (ret != 0) - goto exit3; - - ipw->attr_memory = ioremap(p_dev->resource[3]->start, - resource_size(p_dev->resource[3])); - request_mem_region(p_dev->resource[3]->start, - resource_size(p_dev->resource[3]), - IPWIRELESS_PCCARD_NAME); - - return 0; - -exit3: -exit2: - if (ipw->common_memory) { - release_mem_region(p_dev->resource[2]->start, - resource_size(p_dev->resource[2])); - iounmap(ipw->common_memory); - } -exit1: - release_resource(io_resource); - pcmcia_disable_device(p_dev); - return -1; -} - -static int config_ipwireless(struct ipw_dev *ipw) -{ - struct pcmcia_device *link = ipw->link; - int ret = 0; - - ipw->is_v2_card = 0; - link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM | - CONF_ENABLE_IRQ; - - ret = pcmcia_loop_config(link, ipwireless_probe, ipw); - if (ret != 0) - return ret; - - INIT_WORK(&ipw->work_reboot, signalled_reboot_work); - - ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, - ipw->attr_memory, ipw->common_memory, - ipw->is_v2_card, signalled_reboot_callback, - ipw); - - ret = pcmcia_request_irq(link, ipwireless_interrupt); - if (ret != 0) - goto exit; - - printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n", - ipw->is_v2_card ? "V2/V3" : "V1"); - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": I/O ports %pR, irq %d\n", link->resource[0], - (unsigned int) link->irq); - if (ipw->attr_memory && ipw->common_memory) - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": attr memory %pR, common memory %pR\n", - link->resource[3], - link->resource[2]); - - ipw->network = ipwireless_network_create(ipw->hardware); - if (!ipw->network) - goto exit; - - ipw->tty = ipwireless_tty_create(ipw->hardware, ipw->network); - if (!ipw->tty) - goto exit; - - ipwireless_init_hardware_v2_v3(ipw->hardware); - - /* - * Do the RequestConfiguration last, because it enables interrupts. - * Then we don't get any interrupts before we're ready for them. - */ - ret = pcmcia_enable_device(link); - if (ret != 0) - goto exit; - - return 0; - -exit: - if (ipw->common_memory) { - release_mem_region(link->resource[2]->start, - resource_size(link->resource[2])); - iounmap(ipw->common_memory); - } - if (ipw->attr_memory) { - release_mem_region(link->resource[3]->start, - resource_size(link->resource[3])); - iounmap(ipw->attr_memory); - } - pcmcia_disable_device(link); - return -1; -} - -static void release_ipwireless(struct ipw_dev *ipw) -{ - if (ipw->common_memory) { - release_mem_region(ipw->link->resource[2]->start, - resource_size(ipw->link->resource[2])); - iounmap(ipw->common_memory); - } - if (ipw->attr_memory) { - release_mem_region(ipw->link->resource[3]->start, - resource_size(ipw->link->resource[3])); - iounmap(ipw->attr_memory); - } - pcmcia_disable_device(ipw->link); -} - -/* - * ipwireless_attach() creates an "instance" of the driver, allocating - * local data structures for one device (one interface). The device - * is registered with Card Services. - * - * The pcmcia_device structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a - * card insertion event. - */ -static int ipwireless_attach(struct pcmcia_device *link) -{ - struct ipw_dev *ipw; - int ret; - - ipw = kzalloc(sizeof(struct ipw_dev), GFP_KERNEL); - if (!ipw) - return -ENOMEM; - - ipw->link = link; - link->priv = ipw; - - ipw->hardware = ipwireless_hardware_create(); - if (!ipw->hardware) { - kfree(ipw); - return -ENOMEM; - } - /* RegisterClient will call config_ipwireless */ - - ret = config_ipwireless(ipw); - - if (ret != 0) { - ipwireless_detach(link); - return ret; - } - - return 0; -} - -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ -static void ipwireless_detach(struct pcmcia_device *link) -{ - struct ipw_dev *ipw = link->priv; - - release_ipwireless(ipw); - - if (ipw->tty != NULL) - ipwireless_tty_free(ipw->tty); - if (ipw->network != NULL) - ipwireless_network_free(ipw->network); - if (ipw->hardware != NULL) - ipwireless_hardware_free(ipw->hardware); - kfree(ipw); -} - -static struct pcmcia_driver me = { - .owner = THIS_MODULE, - .probe = ipwireless_attach, - .remove = ipwireless_detach, - .name = IPWIRELESS_PCCARD_NAME, - .id_table = ipw_ids -}; - -/* - * Module insertion : initialisation of the module. - * Register the card with cardmgr... - */ -static int __init init_ipwireless(void) -{ - int ret; - - ret = ipwireless_tty_init(); - if (ret != 0) - return ret; - - ret = pcmcia_register_driver(&me); - if (ret != 0) - ipwireless_tty_release(); - - return ret; -} - -/* - * Module removal - */ -static void __exit exit_ipwireless(void) -{ - pcmcia_unregister_driver(&me); - ipwireless_tty_release(); -} - -module_init(init_ipwireless); -module_exit(exit_ipwireless); - -MODULE_AUTHOR(IPWIRELESS_PCMCIA_AUTHOR); -MODULE_DESCRIPTION(IPWIRELESS_PCCARD_NAME " " IPWIRELESS_PCMCIA_VERSION); -MODULE_LICENSE("GPL"); diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h deleted file mode 100644 index f2cbb116bccb..000000000000 --- a/drivers/char/pcmcia/ipwireless/main.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#ifndef _IPWIRELESS_CS_H_ -#define _IPWIRELESS_CS_H_ - -#include -#include - -#include -#include - -#include "hardware.h" - -#define IPWIRELESS_PCCARD_NAME "ipwireless" -#define IPWIRELESS_PCMCIA_VERSION "1.1" -#define IPWIRELESS_PCMCIA_AUTHOR \ - "Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba" - -#define IPWIRELESS_TX_QUEUE_SIZE 262144 -#define IPWIRELESS_RX_QUEUE_SIZE 262144 - -#define IPWIRELESS_STATE_DEBUG - -struct ipw_hardware; -struct ipw_network; -struct ipw_tty; - -struct ipw_dev { - struct pcmcia_device *link; - int is_v2_card; - - void __iomem *attr_memory; - - void __iomem *common_memory; - - /* Reference to attribute memory, containing CIS data */ - void *attribute_memory; - - /* Hardware context */ - struct ipw_hardware *hardware; - /* Network layer context */ - struct ipw_network *network; - /* TTY device context */ - struct ipw_tty *tty; - struct work_struct work_reboot; -}; - -/* Module parametres */ -extern int ipwireless_debug; -extern int ipwireless_loopback; -extern int ipwireless_out_queue; - -#endif diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c deleted file mode 100644 index f7daeea598e4..000000000000 --- a/drivers/char/pcmcia/ipwireless/network.c +++ /dev/null @@ -1,508 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "network.h" -#include "hardware.h" -#include "main.h" -#include "tty.h" - -#define MAX_ASSOCIATED_TTYS 2 - -#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP) - -struct ipw_network { - /* Hardware context, used for calls to hardware layer. */ - struct ipw_hardware *hardware; - /* Context for kernel 'generic_ppp' functionality */ - struct ppp_channel *ppp_channel; - /* tty context connected with IPW console */ - struct ipw_tty *associated_ttys[NO_OF_IPW_CHANNELS][MAX_ASSOCIATED_TTYS]; - /* True if ppp needs waking up once we're ready to xmit */ - int ppp_blocked; - /* Number of packets queued up in hardware module. */ - int outgoing_packets_queued; - /* Spinlock to avoid interrupts during shutdown */ - spinlock_t lock; - struct mutex close_lock; - - /* PPP ioctl data, not actually used anywere */ - unsigned int flags; - unsigned int rbits; - u32 xaccm[8]; - u32 raccm; - int mru; - - int shutting_down; - unsigned int ras_control_lines; - - struct work_struct work_go_online; - struct work_struct work_go_offline; -}; - -static void notify_packet_sent(void *callback_data, unsigned int packet_length) -{ - struct ipw_network *network = callback_data; - unsigned long flags; - - spin_lock_irqsave(&network->lock, flags); - network->outgoing_packets_queued--; - if (network->ppp_channel != NULL) { - if (network->ppp_blocked) { - network->ppp_blocked = 0; - spin_unlock_irqrestore(&network->lock, flags); - ppp_output_wakeup(network->ppp_channel); - if (ipwireless_debug) - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME - ": ppp unblocked\n"); - } else - spin_unlock_irqrestore(&network->lock, flags); - } else - spin_unlock_irqrestore(&network->lock, flags); -} - -/* - * Called by the ppp system when it has a packet to send to the hardware. - */ -static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel, - struct sk_buff *skb) -{ - struct ipw_network *network = ppp_channel->private; - unsigned long flags; - - spin_lock_irqsave(&network->lock, flags); - if (network->outgoing_packets_queued < ipwireless_out_queue) { - unsigned char *buf; - static unsigned char header[] = { - PPP_ALLSTATIONS, /* 0xff */ - PPP_UI, /* 0x03 */ - }; - int ret; - - network->outgoing_packets_queued++; - spin_unlock_irqrestore(&network->lock, flags); - - /* - * If we have the requested amount of headroom in the skb we - * were handed, then we can add the header efficiently. - */ - if (skb_headroom(skb) >= 2) { - memcpy(skb_push(skb, 2), header, 2); - ret = ipwireless_send_packet(network->hardware, - IPW_CHANNEL_RAS, skb->data, - skb->len, - notify_packet_sent, - network); - if (ret == -1) { - skb_pull(skb, 2); - return 0; - } - } else { - /* Otherwise (rarely) we do it inefficiently. */ - buf = kmalloc(skb->len + 2, GFP_ATOMIC); - if (!buf) - return 0; - memcpy(buf + 2, skb->data, skb->len); - memcpy(buf, header, 2); - ret = ipwireless_send_packet(network->hardware, - IPW_CHANNEL_RAS, buf, - skb->len + 2, - notify_packet_sent, - network); - kfree(buf); - if (ret == -1) - return 0; - } - kfree_skb(skb); - return 1; - } else { - /* - * Otherwise reject the packet, and flag that the ppp system - * needs to be unblocked once we are ready to send. - */ - network->ppp_blocked = 1; - spin_unlock_irqrestore(&network->lock, flags); - if (ipwireless_debug) - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": ppp blocked\n"); - return 0; - } -} - -/* Handle an ioctl call that has come in via ppp. (copy of ppp_async_ioctl() */ -static int ipwireless_ppp_ioctl(struct ppp_channel *ppp_channel, - unsigned int cmd, unsigned long arg) -{ - struct ipw_network *network = ppp_channel->private; - int err, val; - u32 accm[8]; - int __user *user_arg = (int __user *) arg; - - err = -EFAULT; - switch (cmd) { - case PPPIOCGFLAGS: - val = network->flags | network->rbits; - if (put_user(val, user_arg)) - break; - err = 0; - break; - - case PPPIOCSFLAGS: - if (get_user(val, user_arg)) - break; - network->flags = val & ~SC_RCV_BITS; - network->rbits = val & SC_RCV_BITS; - err = 0; - break; - - case PPPIOCGASYNCMAP: - if (put_user(network->xaccm[0], user_arg)) - break; - err = 0; - break; - - case PPPIOCSASYNCMAP: - if (get_user(network->xaccm[0], user_arg)) - break; - err = 0; - break; - - case PPPIOCGRASYNCMAP: - if (put_user(network->raccm, user_arg)) - break; - err = 0; - break; - - case PPPIOCSRASYNCMAP: - if (get_user(network->raccm, user_arg)) - break; - err = 0; - break; - - case PPPIOCGXASYNCMAP: - if (copy_to_user((void __user *) arg, network->xaccm, - sizeof(network->xaccm))) - break; - err = 0; - break; - - case PPPIOCSXASYNCMAP: - if (copy_from_user(accm, (void __user *) arg, sizeof(accm))) - break; - accm[2] &= ~0x40000000U; /* can't escape 0x5e */ - accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */ - memcpy(network->xaccm, accm, sizeof(network->xaccm)); - err = 0; - break; - - case PPPIOCGMRU: - if (put_user(network->mru, user_arg)) - break; - err = 0; - break; - - case PPPIOCSMRU: - if (get_user(val, user_arg)) - break; - if (val < PPP_MRU) - val = PPP_MRU; - network->mru = val; - err = 0; - break; - - default: - err = -ENOTTY; - } - - return err; -} - -static const struct ppp_channel_ops ipwireless_ppp_channel_ops = { - .start_xmit = ipwireless_ppp_start_xmit, - .ioctl = ipwireless_ppp_ioctl -}; - -static void do_go_online(struct work_struct *work_go_online) -{ - struct ipw_network *network = - container_of(work_go_online, struct ipw_network, - work_go_online); - unsigned long flags; - - spin_lock_irqsave(&network->lock, flags); - if (!network->ppp_channel) { - struct ppp_channel *channel; - - spin_unlock_irqrestore(&network->lock, flags); - channel = kzalloc(sizeof(struct ppp_channel), GFP_KERNEL); - if (!channel) { - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": unable to allocate PPP channel\n"); - return; - } - channel->private = network; - channel->mtu = 16384; /* Wild guess */ - channel->hdrlen = 2; - channel->ops = &ipwireless_ppp_channel_ops; - - network->flags = 0; - network->rbits = 0; - network->mru = PPP_MRU; - memset(network->xaccm, 0, sizeof(network->xaccm)); - network->xaccm[0] = ~0U; - network->xaccm[3] = 0x60000000U; - network->raccm = ~0U; - ppp_register_channel(channel); - spin_lock_irqsave(&network->lock, flags); - network->ppp_channel = channel; - } - spin_unlock_irqrestore(&network->lock, flags); -} - -static void do_go_offline(struct work_struct *work_go_offline) -{ - struct ipw_network *network = - container_of(work_go_offline, struct ipw_network, - work_go_offline); - unsigned long flags; - - mutex_lock(&network->close_lock); - spin_lock_irqsave(&network->lock, flags); - if (network->ppp_channel != NULL) { - struct ppp_channel *channel = network->ppp_channel; - - network->ppp_channel = NULL; - spin_unlock_irqrestore(&network->lock, flags); - mutex_unlock(&network->close_lock); - ppp_unregister_channel(channel); - } else { - spin_unlock_irqrestore(&network->lock, flags); - mutex_unlock(&network->close_lock); - } -} - -void ipwireless_network_notify_control_line_change(struct ipw_network *network, - unsigned int channel_idx, - unsigned int control_lines, - unsigned int changed_mask) -{ - int i; - - if (channel_idx == IPW_CHANNEL_RAS) - network->ras_control_lines = control_lines; - - for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { - struct ipw_tty *tty = - network->associated_ttys[channel_idx][i]; - - /* - * If it's associated with a tty (other than the RAS channel - * when we're online), then send the data to that tty. The RAS - * channel's data is handled above - it always goes through - * ppp_generic. - */ - if (tty) - ipwireless_tty_notify_control_line_change(tty, - channel_idx, - control_lines, - changed_mask); - } -} - -/* - * Some versions of firmware stuff packets with 0xff 0x03 (PPP: ALLSTATIONS, UI) - * bytes, which are required on sent packet, but not always present on received - * packets - */ -static struct sk_buff *ipw_packet_received_skb(unsigned char *data, - unsigned int length) -{ - struct sk_buff *skb; - - if (length > 2 && data[0] == PPP_ALLSTATIONS && data[1] == PPP_UI) { - length -= 2; - data += 2; - } - - skb = dev_alloc_skb(length + 4); - skb_reserve(skb, 2); - memcpy(skb_put(skb, length), data, length); - - return skb; -} - -void ipwireless_network_packet_received(struct ipw_network *network, - unsigned int channel_idx, - unsigned char *data, - unsigned int length) -{ - int i; - unsigned long flags; - - for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { - struct ipw_tty *tty = network->associated_ttys[channel_idx][i]; - - if (!tty) - continue; - - /* - * If it's associated with a tty (other than the RAS channel - * when we're online), then send the data to that tty. The RAS - * channel's data is handled above - it always goes through - * ppp_generic. - */ - if (channel_idx == IPW_CHANNEL_RAS - && (network->ras_control_lines & - IPW_CONTROL_LINE_DCD) != 0 - && ipwireless_tty_is_modem(tty)) { - /* - * If data came in on the RAS channel and this tty is - * the modem tty, and we are online, then we send it to - * the PPP layer. - */ - mutex_lock(&network->close_lock); - spin_lock_irqsave(&network->lock, flags); - if (network->ppp_channel != NULL) { - struct sk_buff *skb; - - spin_unlock_irqrestore(&network->lock, - flags); - - /* Send the data to the ppp_generic module. */ - skb = ipw_packet_received_skb(data, length); - ppp_input(network->ppp_channel, skb); - } else - spin_unlock_irqrestore(&network->lock, - flags); - mutex_unlock(&network->close_lock); - } - /* Otherwise we send it out the tty. */ - else - ipwireless_tty_received(tty, data, length); - } -} - -struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw) -{ - struct ipw_network *network = - kzalloc(sizeof(struct ipw_network), GFP_ATOMIC); - - if (!network) - return NULL; - - spin_lock_init(&network->lock); - mutex_init(&network->close_lock); - - network->hardware = hw; - - INIT_WORK(&network->work_go_online, do_go_online); - INIT_WORK(&network->work_go_offline, do_go_offline); - - ipwireless_associate_network(hw, network); - - return network; -} - -void ipwireless_network_free(struct ipw_network *network) -{ - network->shutting_down = 1; - - ipwireless_ppp_close(network); - flush_work_sync(&network->work_go_online); - flush_work_sync(&network->work_go_offline); - - ipwireless_stop_interrupts(network->hardware); - ipwireless_associate_network(network->hardware, NULL); - - kfree(network); -} - -void ipwireless_associate_network_tty(struct ipw_network *network, - unsigned int channel_idx, - struct ipw_tty *tty) -{ - int i; - - for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) - if (network->associated_ttys[channel_idx][i] == NULL) { - network->associated_ttys[channel_idx][i] = tty; - break; - } -} - -void ipwireless_disassociate_network_ttys(struct ipw_network *network, - unsigned int channel_idx) -{ - int i; - - for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) - network->associated_ttys[channel_idx][i] = NULL; -} - -void ipwireless_ppp_open(struct ipw_network *network) -{ - if (ipwireless_debug) - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": online\n"); - schedule_work(&network->work_go_online); -} - -void ipwireless_ppp_close(struct ipw_network *network) -{ - /* Disconnect from the wireless network. */ - if (ipwireless_debug) - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": offline\n"); - schedule_work(&network->work_go_offline); -} - -int ipwireless_ppp_channel_index(struct ipw_network *network) -{ - int ret = -1; - unsigned long flags; - - spin_lock_irqsave(&network->lock, flags); - if (network->ppp_channel != NULL) - ret = ppp_channel_index(network->ppp_channel); - spin_unlock_irqrestore(&network->lock, flags); - - return ret; -} - -int ipwireless_ppp_unit_number(struct ipw_network *network) -{ - int ret = -1; - unsigned long flags; - - spin_lock_irqsave(&network->lock, flags); - if (network->ppp_channel != NULL) - ret = ppp_unit_number(network->ppp_channel); - spin_unlock_irqrestore(&network->lock, flags); - - return ret; -} - -int ipwireless_ppp_mru(const struct ipw_network *network) -{ - return network->mru; -} diff --git a/drivers/char/pcmcia/ipwireless/network.h b/drivers/char/pcmcia/ipwireless/network.h deleted file mode 100644 index 561f765b3334..000000000000 --- a/drivers/char/pcmcia/ipwireless/network.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#ifndef _IPWIRELESS_CS_NETWORK_H_ -#define _IPWIRELESS_CS_NETWORK_H_ - -#include - -struct ipw_network; -struct ipw_tty; -struct ipw_hardware; - -/* Definitions of the different channels on the PCMCIA UE */ -#define IPW_CHANNEL_RAS 0 -#define IPW_CHANNEL_DIALLER 1 -#define IPW_CHANNEL_CONSOLE 2 -#define NO_OF_IPW_CHANNELS 5 - -void ipwireless_network_notify_control_line_change(struct ipw_network *net, - unsigned int channel_idx, unsigned int control_lines, - unsigned int control_mask); -void ipwireless_network_packet_received(struct ipw_network *net, - unsigned int channel_idx, unsigned char *data, - unsigned int length); -struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw); -void ipwireless_network_free(struct ipw_network *net); -void ipwireless_associate_network_tty(struct ipw_network *net, - unsigned int channel_idx, struct ipw_tty *tty); -void ipwireless_disassociate_network_ttys(struct ipw_network *net, - unsigned int channel_idx); - -void ipwireless_ppp_open(struct ipw_network *net); - -void ipwireless_ppp_close(struct ipw_network *net); -int ipwireless_ppp_channel_index(struct ipw_network *net); -int ipwireless_ppp_unit_number(struct ipw_network *net); -int ipwireless_ppp_mru(const struct ipw_network *net); - -#endif diff --git a/drivers/char/pcmcia/ipwireless/setup_protocol.h b/drivers/char/pcmcia/ipwireless/setup_protocol.h deleted file mode 100644 index 9d6bcc77c73c..000000000000 --- a/drivers/char/pcmcia/ipwireless/setup_protocol.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#ifndef _IPWIRELESS_CS_SETUP_PROTOCOL_H_ -#define _IPWIRELESS_CS_SETUP_PROTOCOL_H_ - -/* Version of the setup protocol and transport protocols */ -#define TL_SETUP_VERSION 1 - -#define TL_SETUP_VERSION_QRY_TMO 1000 -#define TL_SETUP_MAX_VERSION_QRY 30 - -/* Message numbers 0-9 are obsoleted and must not be reused! */ -#define TL_SETUP_SIGNO_GET_VERSION_QRY 10 -#define TL_SETUP_SIGNO_GET_VERSION_RSP 11 -#define TL_SETUP_SIGNO_CONFIG_MSG 12 -#define TL_SETUP_SIGNO_CONFIG_DONE_MSG 13 -#define TL_SETUP_SIGNO_OPEN_MSG 14 -#define TL_SETUP_SIGNO_CLOSE_MSG 15 - -#define TL_SETUP_SIGNO_INFO_MSG 20 -#define TL_SETUP_SIGNO_INFO_MSG_ACK 21 - -#define TL_SETUP_SIGNO_REBOOT_MSG 22 -#define TL_SETUP_SIGNO_REBOOT_MSG_ACK 23 - -/* Synchronous start-messages */ -struct tl_setup_get_version_qry { - unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_QRY */ -} __attribute__ ((__packed__)); - -struct tl_setup_get_version_rsp { - unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_RSP */ - unsigned char version; /* TL_SETUP_VERSION */ -} __attribute__ ((__packed__)); - -struct tl_setup_config_msg { - unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_MSG */ - unsigned char port_no; - unsigned char prio_data; - unsigned char prio_ctrl; -} __attribute__ ((__packed__)); - -struct tl_setup_config_done_msg { - unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_DONE_MSG */ -} __attribute__ ((__packed__)); - -/* Asyncronous messages */ -struct tl_setup_open_msg { - unsigned char sig_no; /* TL_SETUP_SIGNO_OPEN_MSG */ - unsigned char port_no; -} __attribute__ ((__packed__)); - -struct tl_setup_close_msg { - unsigned char sig_no; /* TL_SETUP_SIGNO_CLOSE_MSG */ - unsigned char port_no; -} __attribute__ ((__packed__)); - -/* Driver type - for use in tl_setup_info_msg.driver_type */ -#define COMM_DRIVER 0 -#define NDISWAN_DRIVER 1 -#define NDISWAN_DRIVER_MAJOR_VERSION 2 -#define NDISWAN_DRIVER_MINOR_VERSION 0 - -/* - * It should not matter when this message comes over as we just store the - * results and send the ACK. - */ -struct tl_setup_info_msg { - unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG */ - unsigned char driver_type; - unsigned char major_version; - unsigned char minor_version; -} __attribute__ ((__packed__)); - -struct tl_setup_info_msgAck { - unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG_ACK */ -} __attribute__ ((__packed__)); - -struct TlSetupRebootMsgAck { - unsigned char sig_no; /* TL_SETUP_SIGNO_REBOOT_MSG_ACK */ -} __attribute__ ((__packed__)); - -/* Define a union of all the msgs that the driver can receive from the card.*/ -union ipw_setup_rx_msg { - unsigned char sig_no; - struct tl_setup_get_version_rsp version_rsp_msg; - struct tl_setup_open_msg open_msg; - struct tl_setup_close_msg close_msg; - struct tl_setup_info_msg InfoMsg; - struct tl_setup_info_msgAck info_msg_ack; -} __attribute__ ((__packed__)); - -#endif /* _IPWIRELESS_CS_SETUP_PROTOCOL_H_ */ diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c deleted file mode 100644 index ef92869502a7..000000000000 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ /dev/null @@ -1,679 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "tty.h" -#include "network.h" -#include "hardware.h" -#include "main.h" - -#define IPWIRELESS_PCMCIA_START (0) -#define IPWIRELESS_PCMCIA_MINORS (24) -#define IPWIRELESS_PCMCIA_MINOR_RANGE (8) - -#define TTYTYPE_MODEM (0) -#define TTYTYPE_MONITOR (1) -#define TTYTYPE_RAS_RAW (2) - -struct ipw_tty { - int index; - struct ipw_hardware *hardware; - unsigned int channel_idx; - unsigned int secondary_channel_idx; - int tty_type; - struct ipw_network *network; - struct tty_struct *linux_tty; - int open_count; - unsigned int control_lines; - struct mutex ipw_tty_mutex; - int tx_bytes_queued; - int closing; -}; - -static struct ipw_tty *ttys[IPWIRELESS_PCMCIA_MINORS]; - -static struct tty_driver *ipw_tty_driver; - -static char *tty_type_name(int tty_type) -{ - static char *channel_names[] = { - "modem", - "monitor", - "RAS-raw" - }; - - return channel_names[tty_type]; -} - -static void report_registering(struct ipw_tty *tty) -{ - char *iftype = tty_type_name(tty->tty_type); - - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": registering %s device ttyIPWp%d\n", iftype, tty->index); -} - -static void report_deregistering(struct ipw_tty *tty) -{ - char *iftype = tty_type_name(tty->tty_type); - - printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": deregistering %s device ttyIPWp%d\n", iftype, - tty->index); -} - -static struct ipw_tty *get_tty(int minor) -{ - if (minor < ipw_tty_driver->minor_start - || minor >= ipw_tty_driver->minor_start + - IPWIRELESS_PCMCIA_MINORS) - return NULL; - else { - int minor_offset = minor - ipw_tty_driver->minor_start; - - /* - * The 'ras_raw' channel is only available when 'loopback' mode - * is enabled. - * Number of minor starts with 16 (_RANGE * _RAS_RAW). - */ - if (!ipwireless_loopback && - minor_offset >= - IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW) - return NULL; - - return ttys[minor_offset]; - } -} - -static int ipw_open(struct tty_struct *linux_tty, struct file *filp) -{ - int minor = linux_tty->index; - struct ipw_tty *tty = get_tty(minor); - - if (!tty) - return -ENODEV; - - mutex_lock(&tty->ipw_tty_mutex); - - if (tty->closing) { - mutex_unlock(&tty->ipw_tty_mutex); - return -ENODEV; - } - if (tty->open_count == 0) - tty->tx_bytes_queued = 0; - - tty->open_count++; - - tty->linux_tty = linux_tty; - linux_tty->driver_data = tty; - linux_tty->low_latency = 1; - - if (tty->tty_type == TTYTYPE_MODEM) - ipwireless_ppp_open(tty->network); - - mutex_unlock(&tty->ipw_tty_mutex); - - return 0; -} - -static void do_ipw_close(struct ipw_tty *tty) -{ - tty->open_count--; - - if (tty->open_count == 0) { - struct tty_struct *linux_tty = tty->linux_tty; - - if (linux_tty != NULL) { - tty->linux_tty = NULL; - linux_tty->driver_data = NULL; - - if (tty->tty_type == TTYTYPE_MODEM) - ipwireless_ppp_close(tty->network); - } - } -} - -static void ipw_hangup(struct tty_struct *linux_tty) -{ - struct ipw_tty *tty = linux_tty->driver_data; - - if (!tty) - return; - - mutex_lock(&tty->ipw_tty_mutex); - if (tty->open_count == 0) { - mutex_unlock(&tty->ipw_tty_mutex); - return; - } - - do_ipw_close(tty); - - mutex_unlock(&tty->ipw_tty_mutex); -} - -static void ipw_close(struct tty_struct *linux_tty, struct file *filp) -{ - ipw_hangup(linux_tty); -} - -/* Take data received from hardware, and send it out the tty */ -void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, - unsigned int length) -{ - struct tty_struct *linux_tty; - int work = 0; - - mutex_lock(&tty->ipw_tty_mutex); - linux_tty = tty->linux_tty; - if (linux_tty == NULL) { - mutex_unlock(&tty->ipw_tty_mutex); - return; - } - - if (!tty->open_count) { - mutex_unlock(&tty->ipw_tty_mutex); - return; - } - mutex_unlock(&tty->ipw_tty_mutex); - - work = tty_insert_flip_string(linux_tty, data, length); - - if (work != length) - printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME - ": %d chars not inserted to flip buffer!\n", - length - work); - - /* - * This may sleep if ->low_latency is set - */ - if (work) - tty_flip_buffer_push(linux_tty); -} - -static void ipw_write_packet_sent_callback(void *callback_data, - unsigned int packet_length) -{ - struct ipw_tty *tty = callback_data; - - /* - * Packet has been sent, so we subtract the number of bytes from our - * tally of outstanding TX bytes. - */ - tty->tx_bytes_queued -= packet_length; -} - -static int ipw_write(struct tty_struct *linux_tty, - const unsigned char *buf, int count) -{ - struct ipw_tty *tty = linux_tty->driver_data; - int room, ret; - - if (!tty) - return -ENODEV; - - mutex_lock(&tty->ipw_tty_mutex); - if (!tty->open_count) { - mutex_unlock(&tty->ipw_tty_mutex); - return -EINVAL; - } - - room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; - if (room < 0) - room = 0; - /* Don't allow caller to write any more than we have room for */ - if (count > room) - count = room; - - if (count == 0) { - mutex_unlock(&tty->ipw_tty_mutex); - return 0; - } - - ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS, - buf, count, - ipw_write_packet_sent_callback, tty); - if (ret == -1) { - mutex_unlock(&tty->ipw_tty_mutex); - return 0; - } - - tty->tx_bytes_queued += count; - mutex_unlock(&tty->ipw_tty_mutex); - - return count; -} - -static int ipw_write_room(struct tty_struct *linux_tty) -{ - struct ipw_tty *tty = linux_tty->driver_data; - int room; - - /* FIXME: Exactly how is the tty object locked here .. */ - if (!tty) - return -ENODEV; - - if (!tty->open_count) - return -EINVAL; - - room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; - if (room < 0) - room = 0; - - return room; -} - -static int ipwireless_get_serial_info(struct ipw_tty *tty, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return (-EFAULT); - - memset(&tmp, 0, sizeof(tmp)); - tmp.type = PORT_UNKNOWN; - tmp.line = tty->index; - tmp.port = 0; - tmp.irq = 0; - tmp.flags = 0; - tmp.baud_base = 115200; - tmp.close_delay = 0; - tmp.closing_wait = 0; - tmp.custom_divisor = 0; - tmp.hub6 = 0; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - - return 0; -} - -static int ipw_chars_in_buffer(struct tty_struct *linux_tty) -{ - struct ipw_tty *tty = linux_tty->driver_data; - - if (!tty) - return 0; - - if (!tty->open_count) - return 0; - - return tty->tx_bytes_queued; -} - -static int get_control_lines(struct ipw_tty *tty) -{ - unsigned int my = tty->control_lines; - unsigned int out = 0; - - if (my & IPW_CONTROL_LINE_RTS) - out |= TIOCM_RTS; - if (my & IPW_CONTROL_LINE_DTR) - out |= TIOCM_DTR; - if (my & IPW_CONTROL_LINE_CTS) - out |= TIOCM_CTS; - if (my & IPW_CONTROL_LINE_DSR) - out |= TIOCM_DSR; - if (my & IPW_CONTROL_LINE_DCD) - out |= TIOCM_CD; - - return out; -} - -static int set_control_lines(struct ipw_tty *tty, unsigned int set, - unsigned int clear) -{ - int ret; - - if (set & TIOCM_RTS) { - ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 1); - if (ret) - return ret; - if (tty->secondary_channel_idx != -1) { - ret = ipwireless_set_RTS(tty->hardware, - tty->secondary_channel_idx, 1); - if (ret) - return ret; - } - } - if (set & TIOCM_DTR) { - ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 1); - if (ret) - return ret; - if (tty->secondary_channel_idx != -1) { - ret = ipwireless_set_DTR(tty->hardware, - tty->secondary_channel_idx, 1); - if (ret) - return ret; - } - } - if (clear & TIOCM_RTS) { - ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 0); - if (tty->secondary_channel_idx != -1) { - ret = ipwireless_set_RTS(tty->hardware, - tty->secondary_channel_idx, 0); - if (ret) - return ret; - } - } - if (clear & TIOCM_DTR) { - ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 0); - if (tty->secondary_channel_idx != -1) { - ret = ipwireless_set_DTR(tty->hardware, - tty->secondary_channel_idx, 0); - if (ret) - return ret; - } - } - return 0; -} - -static int ipw_tiocmget(struct tty_struct *linux_tty) -{ - struct ipw_tty *tty = linux_tty->driver_data; - /* FIXME: Exactly how is the tty object locked here .. */ - - if (!tty) - return -ENODEV; - - if (!tty->open_count) - return -EINVAL; - - return get_control_lines(tty); -} - -static int -ipw_tiocmset(struct tty_struct *linux_tty, - unsigned int set, unsigned int clear) -{ - struct ipw_tty *tty = linux_tty->driver_data; - /* FIXME: Exactly how is the tty object locked here .. */ - - if (!tty) - return -ENODEV; - - if (!tty->open_count) - return -EINVAL; - - return set_control_lines(tty, set, clear); -} - -static int ipw_ioctl(struct tty_struct *linux_tty, - unsigned int cmd, unsigned long arg) -{ - struct ipw_tty *tty = linux_tty->driver_data; - - if (!tty) - return -ENODEV; - - if (!tty->open_count) - return -EINVAL; - - /* FIXME: Exactly how is the tty object locked here .. */ - - switch (cmd) { - case TIOCGSERIAL: - return ipwireless_get_serial_info(tty, (void __user *) arg); - - case TIOCSSERIAL: - return 0; /* Keeps the PCMCIA scripts happy. */ - } - - if (tty->tty_type == TTYTYPE_MODEM) { - switch (cmd) { - case PPPIOCGCHAN: - { - int chan = ipwireless_ppp_channel_index( - tty->network); - - if (chan < 0) - return -ENODEV; - if (put_user(chan, (int __user *) arg)) - return -EFAULT; - } - return 0; - - case PPPIOCGUNIT: - { - int unit = ipwireless_ppp_unit_number( - tty->network); - - if (unit < 0) - return -ENODEV; - if (put_user(unit, (int __user *) arg)) - return -EFAULT; - } - return 0; - - case FIONREAD: - { - int val = 0; - - if (put_user(val, (int __user *) arg)) - return -EFAULT; - } - return 0; - case TCFLSH: - return tty_perform_flush(linux_tty, arg); - } - } - return -ENOIOCTLCMD; -} - -static int add_tty(int j, - struct ipw_hardware *hardware, - struct ipw_network *network, int channel_idx, - int secondary_channel_idx, int tty_type) -{ - ttys[j] = kzalloc(sizeof(struct ipw_tty), GFP_KERNEL); - if (!ttys[j]) - return -ENOMEM; - ttys[j]->index = j; - ttys[j]->hardware = hardware; - ttys[j]->channel_idx = channel_idx; - ttys[j]->secondary_channel_idx = secondary_channel_idx; - ttys[j]->network = network; - ttys[j]->tty_type = tty_type; - mutex_init(&ttys[j]->ipw_tty_mutex); - - tty_register_device(ipw_tty_driver, j, NULL); - ipwireless_associate_network_tty(network, channel_idx, ttys[j]); - - if (secondary_channel_idx != -1) - ipwireless_associate_network_tty(network, - secondary_channel_idx, - ttys[j]); - if (get_tty(j + ipw_tty_driver->minor_start) == ttys[j]) - report_registering(ttys[j]); - return 0; -} - -struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hardware, - struct ipw_network *network) -{ - int i, j; - - for (i = 0; i < IPWIRELESS_PCMCIA_MINOR_RANGE; i++) { - int allfree = 1; - - for (j = i; j < IPWIRELESS_PCMCIA_MINORS; - j += IPWIRELESS_PCMCIA_MINOR_RANGE) - if (ttys[j] != NULL) { - allfree = 0; - break; - } - - if (allfree) { - j = i; - - if (add_tty(j, hardware, network, - IPW_CHANNEL_DIALLER, IPW_CHANNEL_RAS, - TTYTYPE_MODEM)) - return NULL; - - j += IPWIRELESS_PCMCIA_MINOR_RANGE; - if (add_tty(j, hardware, network, - IPW_CHANNEL_DIALLER, -1, - TTYTYPE_MONITOR)) - return NULL; - - j += IPWIRELESS_PCMCIA_MINOR_RANGE; - if (add_tty(j, hardware, network, - IPW_CHANNEL_RAS, -1, - TTYTYPE_RAS_RAW)) - return NULL; - - return ttys[i]; - } - } - return NULL; -} - -/* - * Must be called before ipwireless_network_free(). - */ -void ipwireless_tty_free(struct ipw_tty *tty) -{ - int j; - struct ipw_network *network = ttys[tty->index]->network; - - for (j = tty->index; j < IPWIRELESS_PCMCIA_MINORS; - j += IPWIRELESS_PCMCIA_MINOR_RANGE) { - struct ipw_tty *ttyj = ttys[j]; - - if (ttyj) { - mutex_lock(&ttyj->ipw_tty_mutex); - if (get_tty(j + ipw_tty_driver->minor_start) == ttyj) - report_deregistering(ttyj); - ttyj->closing = 1; - if (ttyj->linux_tty != NULL) { - mutex_unlock(&ttyj->ipw_tty_mutex); - tty_hangup(ttyj->linux_tty); - /* Wait till the tty_hangup has completed */ - flush_work_sync(&ttyj->linux_tty->hangup_work); - /* FIXME: Exactly how is the tty object locked here - against a parallel ioctl etc */ - mutex_lock(&ttyj->ipw_tty_mutex); - } - while (ttyj->open_count) - do_ipw_close(ttyj); - ipwireless_disassociate_network_ttys(network, - ttyj->channel_idx); - tty_unregister_device(ipw_tty_driver, j); - ttys[j] = NULL; - mutex_unlock(&ttyj->ipw_tty_mutex); - kfree(ttyj); - } - } -} - -static const struct tty_operations tty_ops = { - .open = ipw_open, - .close = ipw_close, - .hangup = ipw_hangup, - .write = ipw_write, - .write_room = ipw_write_room, - .ioctl = ipw_ioctl, - .chars_in_buffer = ipw_chars_in_buffer, - .tiocmget = ipw_tiocmget, - .tiocmset = ipw_tiocmset, -}; - -int ipwireless_tty_init(void) -{ - int result; - - ipw_tty_driver = alloc_tty_driver(IPWIRELESS_PCMCIA_MINORS); - if (!ipw_tty_driver) - return -ENOMEM; - - ipw_tty_driver->owner = THIS_MODULE; - ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME; - ipw_tty_driver->name = "ttyIPWp"; - ipw_tty_driver->major = 0; - ipw_tty_driver->minor_start = IPWIRELESS_PCMCIA_START; - ipw_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - ipw_tty_driver->subtype = SERIAL_TYPE_NORMAL; - ipw_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - ipw_tty_driver->init_termios = tty_std_termios; - ipw_tty_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - ipw_tty_driver->init_termios.c_ispeed = 9600; - ipw_tty_driver->init_termios.c_ospeed = 9600; - tty_set_operations(ipw_tty_driver, &tty_ops); - result = tty_register_driver(ipw_tty_driver); - if (result) { - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": failed to register tty driver\n"); - put_tty_driver(ipw_tty_driver); - return result; - } - - return 0; -} - -void ipwireless_tty_release(void) -{ - int ret; - - ret = tty_unregister_driver(ipw_tty_driver); - put_tty_driver(ipw_tty_driver); - if (ret != 0) - printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": tty_unregister_driver failed with code %d\n", ret); -} - -int ipwireless_tty_is_modem(struct ipw_tty *tty) -{ - return tty->tty_type == TTYTYPE_MODEM; -} - -void -ipwireless_tty_notify_control_line_change(struct ipw_tty *tty, - unsigned int channel_idx, - unsigned int control_lines, - unsigned int changed_mask) -{ - unsigned int old_control_lines = tty->control_lines; - - tty->control_lines = (tty->control_lines & ~changed_mask) - | (control_lines & changed_mask); - - /* - * If DCD is de-asserted, we close the tty so pppd can tell that we - * have gone offline. - */ - if ((old_control_lines & IPW_CONTROL_LINE_DCD) - && !(tty->control_lines & IPW_CONTROL_LINE_DCD) - && tty->linux_tty) { - tty_hangup(tty->linux_tty); - } -} - diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/char/pcmcia/ipwireless/tty.h deleted file mode 100644 index 747b2d637860..000000000000 --- a/drivers/char/pcmcia/ipwireless/tty.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * IPWireless 3G PCMCIA Network Driver - * - * Original code - * by Stephen Blackheath , - * Ben Martel - * - * Copyrighted as follows: - * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) - * - * Various driver changes and rewrites, port to new kernels - * Copyright (C) 2006-2007 Jiri Kosina - * - * Misc code cleanups and updates - * Copyright (C) 2007 David Sterba - */ - -#ifndef _IPWIRELESS_CS_TTY_H_ -#define _IPWIRELESS_CS_TTY_H_ - -#include -#include - -#include -#include - -struct ipw_tty; -struct ipw_network; -struct ipw_hardware; - -int ipwireless_tty_init(void); -void ipwireless_tty_release(void); - -struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hw, - struct ipw_network *net); -void ipwireless_tty_free(struct ipw_tty *tty); -void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, - unsigned int length); -int ipwireless_tty_is_modem(struct ipw_tty *tty); -void ipwireless_tty_notify_control_line_change(struct ipw_tty *tty, - unsigned int channel_idx, - unsigned int control_lines, - unsigned int changed_mask); - -#endif diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index e549da348a04..690522fcb338 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -24,3 +24,5 @@ obj-$(CONFIG_ROCKETPORT) += rocket.o obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o obj-$(CONFIG_SYNCLINK) += synclink.o + +obj-y += ipwireless/ diff --git a/drivers/tty/ipwireless/Makefile b/drivers/tty/ipwireless/Makefile new file mode 100644 index 000000000000..db80873d7f20 --- /dev/null +++ b/drivers/tty/ipwireless/Makefile @@ -0,0 +1,10 @@ +# +# drivers/char/pcmcia/ipwireless/Makefile +# +# Makefile for the IPWireless driver +# + +obj-$(CONFIG_IPWIRELESS) += ipwireless.o + +ipwireless-y := hardware.o main.o network.o tty.o + diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c new file mode 100644 index 000000000000..0aeb5a38d296 --- /dev/null +++ b/drivers/tty/ipwireless/hardware.c @@ -0,0 +1,1764 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include +#include +#include +#include +#include +#include + +#include "hardware.h" +#include "setup_protocol.h" +#include "network.h" +#include "main.h" + +static void ipw_send_setup_packet(struct ipw_hardware *hw); +static void handle_received_SETUP_packet(struct ipw_hardware *ipw, + unsigned int address, + const unsigned char *data, int len, + int is_last); +static void ipwireless_setup_timer(unsigned long data); +static void handle_received_CTRL_packet(struct ipw_hardware *hw, + unsigned int channel_idx, const unsigned char *data, int len); + +/*#define TIMING_DIAGNOSTICS*/ + +#ifdef TIMING_DIAGNOSTICS + +static struct timing_stats { + unsigned long last_report_time; + unsigned long read_time; + unsigned long write_time; + unsigned long read_bytes; + unsigned long write_bytes; + unsigned long start_time; +}; + +static void start_timing(void) +{ + timing_stats.start_time = jiffies; +} + +static void end_read_timing(unsigned length) +{ + timing_stats.read_time += (jiffies - start_time); + timing_stats.read_bytes += length + 2; + report_timing(); +} + +static void end_write_timing(unsigned length) +{ + timing_stats.write_time += (jiffies - start_time); + timing_stats.write_bytes += length + 2; + report_timing(); +} + +static void report_timing(void) +{ + unsigned long since = jiffies - timing_stats.last_report_time; + + /* If it's been more than one second... */ + if (since >= HZ) { + int first = (timing_stats.last_report_time == 0); + + timing_stats.last_report_time = jiffies; + if (!first) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": %u us elapsed - read %lu bytes in %u us, wrote %lu bytes in %u us\n", + jiffies_to_usecs(since), + timing_stats.read_bytes, + jiffies_to_usecs(timing_stats.read_time), + timing_stats.write_bytes, + jiffies_to_usecs(timing_stats.write_time)); + + timing_stats.read_time = 0; + timing_stats.write_time = 0; + timing_stats.read_bytes = 0; + timing_stats.write_bytes = 0; + } +} +#else +static void start_timing(void) { } +static void end_read_timing(unsigned length) { } +static void end_write_timing(unsigned length) { } +#endif + +/* Imported IPW definitions */ + +#define LL_MTU_V1 318 +#define LL_MTU_V2 250 +#define LL_MTU_MAX (LL_MTU_V1 > LL_MTU_V2 ? LL_MTU_V1 : LL_MTU_V2) + +#define PRIO_DATA 2 +#define PRIO_CTRL 1 +#define PRIO_SETUP 0 + +/* Addresses */ +#define ADDR_SETUP_PROT 0 + +/* Protocol ids */ +enum { + /* Identifier for the Com Data protocol */ + TL_PROTOCOLID_COM_DATA = 0, + + /* Identifier for the Com Control protocol */ + TL_PROTOCOLID_COM_CTRL = 1, + + /* Identifier for the Setup protocol */ + TL_PROTOCOLID_SETUP = 2 +}; + +/* Number of bytes in NL packet header (cannot do + * sizeof(nl_packet_header) since it's a bitfield) */ +#define NL_FIRST_PACKET_HEADER_SIZE 3 + +/* Number of bytes in NL packet header (cannot do + * sizeof(nl_packet_header) since it's a bitfield) */ +#define NL_FOLLOWING_PACKET_HEADER_SIZE 1 + +struct nl_first_packet_header { + unsigned char protocol:3; + unsigned char address:3; + unsigned char packet_rank:2; + unsigned char length_lsb; + unsigned char length_msb; +}; + +struct nl_packet_header { + unsigned char protocol:3; + unsigned char address:3; + unsigned char packet_rank:2; +}; + +/* Value of 'packet_rank' above */ +#define NL_INTERMEDIATE_PACKET 0x0 +#define NL_LAST_PACKET 0x1 +#define NL_FIRST_PACKET 0x2 + +union nl_packet { + /* Network packet header of the first packet (a special case) */ + struct nl_first_packet_header hdr_first; + /* Network packet header of the following packets (if any) */ + struct nl_packet_header hdr; + /* Complete network packet (header + data) */ + unsigned char rawpkt[LL_MTU_MAX]; +} __attribute__ ((__packed__)); + +#define HW_VERSION_UNKNOWN -1 +#define HW_VERSION_1 1 +#define HW_VERSION_2 2 + +/* IPW I/O ports */ +#define IOIER 0x00 /* Interrupt Enable Register */ +#define IOIR 0x02 /* Interrupt Source/ACK register */ +#define IODCR 0x04 /* Data Control Register */ +#define IODRR 0x06 /* Data Read Register */ +#define IODWR 0x08 /* Data Write Register */ +#define IOESR 0x0A /* Embedded Driver Status Register */ +#define IORXR 0x0C /* Rx Fifo Register (Host to Embedded) */ +#define IOTXR 0x0E /* Tx Fifo Register (Embedded to Host) */ + +/* I/O ports and bit definitions for version 1 of the hardware */ + +/* IER bits*/ +#define IER_RXENABLED 0x1 +#define IER_TXENABLED 0x2 + +/* ISR bits */ +#define IR_RXINTR 0x1 +#define IR_TXINTR 0x2 + +/* DCR bits */ +#define DCR_RXDONE 0x1 +#define DCR_TXDONE 0x2 +#define DCR_RXRESET 0x4 +#define DCR_TXRESET 0x8 + +/* I/O ports and bit definitions for version 2 of the hardware */ + +struct MEMCCR { + unsigned short reg_config_option; /* PCCOR: Configuration Option Register */ + unsigned short reg_config_and_status; /* PCCSR: Configuration and Status Register */ + unsigned short reg_pin_replacement; /* PCPRR: Pin Replacemant Register */ + unsigned short reg_socket_and_copy; /* PCSCR: Socket and Copy Register */ + unsigned short reg_ext_status; /* PCESR: Extendend Status Register */ + unsigned short reg_io_base; /* PCIOB: I/O Base Register */ +}; + +struct MEMINFREG { + unsigned short memreg_tx_old; /* TX Register (R/W) */ + unsigned short pad1; + unsigned short memreg_rx_done; /* RXDone Register (R/W) */ + unsigned short pad2; + unsigned short memreg_rx; /* RX Register (R/W) */ + unsigned short pad3; + unsigned short memreg_pc_interrupt_ack; /* PC intr Ack Register (W) */ + unsigned short pad4; + unsigned long memreg_card_present;/* Mask for Host to check (R) for + * CARD_PRESENT_VALUE */ + unsigned short memreg_tx_new; /* TX2 (new) Register (R/W) */ +}; + +#define CARD_PRESENT_VALUE (0xBEEFCAFEUL) + +#define MEMTX_TX 0x0001 +#define MEMRX_RX 0x0001 +#define MEMRX_RX_DONE 0x0001 +#define MEMRX_PCINTACKK 0x0001 + +#define NL_NUM_OF_PRIORITIES 3 +#define NL_NUM_OF_PROTOCOLS 3 +#define NL_NUM_OF_ADDRESSES NO_OF_IPW_CHANNELS + +struct ipw_hardware { + unsigned int base_port; + short hw_version; + unsigned short ll_mtu; + spinlock_t lock; + + int initializing; + int init_loops; + struct timer_list setup_timer; + + /* Flag if hw is ready to send next packet */ + int tx_ready; + /* Count of pending packets to be sent */ + int tx_queued; + struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; + + int rx_bytes_queued; + struct list_head rx_queue; + /* Pool of rx_packet structures that are not currently used. */ + struct list_head rx_pool; + int rx_pool_size; + /* True if reception of data is blocked while userspace processes it. */ + int blocking_rx; + /* True if there is RX data ready on the hardware. */ + int rx_ready; + unsigned short last_memtx_serial; + /* + * Newer versions of the V2 card firmware send serial numbers in the + * MemTX register. 'serial_number_detected' is set true when we detect + * a non-zero serial number (indicating the new firmware). Thereafter, + * the driver can safely ignore the Timer Recovery re-sends to avoid + * out-of-sync problems. + */ + int serial_number_detected; + struct work_struct work_rx; + + /* True if we are to send the set-up data to the hardware. */ + int to_setup; + + /* Card has been removed */ + int removed; + /* Saved irq value when we disable the interrupt. */ + int irq; + /* True if this driver is shutting down. */ + int shutting_down; + /* Modem control lines */ + unsigned int control_lines[NL_NUM_OF_ADDRESSES]; + struct ipw_rx_packet *packet_assembler[NL_NUM_OF_ADDRESSES]; + + struct tasklet_struct tasklet; + + /* The handle for the network layer, for the sending of events to it. */ + struct ipw_network *network; + struct MEMINFREG __iomem *memory_info_regs; + struct MEMCCR __iomem *memregs_CCR; + void (*reboot_callback) (void *data); + void *reboot_callback_data; + + unsigned short __iomem *memreg_tx; +}; + +/* + * Packet info structure for tx packets. + * Note: not all the fields defined here are required for all protocols + */ +struct ipw_tx_packet { + struct list_head queue; + /* channel idx + 1 */ + unsigned char dest_addr; + /* SETUP, CTRL or DATA */ + unsigned char protocol; + /* Length of data block, which starts at the end of this structure */ + unsigned short length; + /* Sending state */ + /* Offset of where we've sent up to so far */ + unsigned long offset; + /* Count of packet fragments, starting at 0 */ + int fragment_count; + + /* Called after packet is sent and before is freed */ + void (*packet_callback) (void *cb_data, unsigned int packet_length); + void *callback_data; +}; + +/* Signals from DTE */ +#define COMCTRL_RTS 0 +#define COMCTRL_DTR 1 + +/* Signals from DCE */ +#define COMCTRL_CTS 2 +#define COMCTRL_DCD 3 +#define COMCTRL_DSR 4 +#define COMCTRL_RI 5 + +struct ipw_control_packet_body { + /* DTE signal or DCE signal */ + unsigned char sig_no; + /* 0: set signal, 1: clear signal */ + unsigned char value; +} __attribute__ ((__packed__)); + +struct ipw_control_packet { + struct ipw_tx_packet header; + struct ipw_control_packet_body body; +}; + +struct ipw_rx_packet { + struct list_head queue; + unsigned int capacity; + unsigned int length; + unsigned int protocol; + unsigned int channel_idx; +}; + +static char *data_type(const unsigned char *buf, unsigned length) +{ + struct nl_packet_header *hdr = (struct nl_packet_header *) buf; + + if (length == 0) + return " "; + + if (hdr->packet_rank & NL_FIRST_PACKET) { + switch (hdr->protocol) { + case TL_PROTOCOLID_COM_DATA: return "DATA "; + case TL_PROTOCOLID_COM_CTRL: return "CTRL "; + case TL_PROTOCOLID_SETUP: return "SETUP"; + default: return "???? "; + } + } else + return " "; +} + +#define DUMP_MAX_BYTES 64 + +static void dump_data_bytes(const char *type, const unsigned char *data, + unsigned length) +{ + char prefix[56]; + + sprintf(prefix, IPWIRELESS_PCCARD_NAME ": %s %s ", + type, data_type(data, length)); + print_hex_dump_bytes(prefix, 0, (void *)data, + length < DUMP_MAX_BYTES ? length : DUMP_MAX_BYTES); +} + +static void swap_packet_bitfield_to_le(unsigned char *data) +{ +#ifdef __BIG_ENDIAN_BITFIELD + unsigned char tmp = *data, ret = 0; + + /* + * transform bits from aa.bbb.ccc to ccc.bbb.aa + */ + ret |= tmp & 0xc0 >> 6; + ret |= tmp & 0x38 >> 1; + ret |= tmp & 0x07 << 5; + *data = ret & 0xff; +#endif +} + +static void swap_packet_bitfield_from_le(unsigned char *data) +{ +#ifdef __BIG_ENDIAN_BITFIELD + unsigned char tmp = *data, ret = 0; + + /* + * transform bits from ccc.bbb.aa to aa.bbb.ccc + */ + ret |= tmp & 0xe0 >> 5; + ret |= tmp & 0x1c << 1; + ret |= tmp & 0x03 << 6; + *data = ret & 0xff; +#endif +} + +static void do_send_fragment(struct ipw_hardware *hw, unsigned char *data, + unsigned length) +{ + unsigned i; + unsigned long flags; + + start_timing(); + BUG_ON(length > hw->ll_mtu); + + if (ipwireless_debug) + dump_data_bytes("send", data, length); + + spin_lock_irqsave(&hw->lock, flags); + + hw->tx_ready = 0; + swap_packet_bitfield_to_le(data); + + if (hw->hw_version == HW_VERSION_1) { + outw((unsigned short) length, hw->base_port + IODWR); + + for (i = 0; i < length; i += 2) { + unsigned short d = data[i]; + __le16 raw_data; + + if (i + 1 < length) + d |= data[i + 1] << 8; + raw_data = cpu_to_le16(d); + outw(raw_data, hw->base_port + IODWR); + } + + outw(DCR_TXDONE, hw->base_port + IODCR); + } else if (hw->hw_version == HW_VERSION_2) { + outw((unsigned short) length, hw->base_port); + + for (i = 0; i < length; i += 2) { + unsigned short d = data[i]; + __le16 raw_data; + + if (i + 1 < length) + d |= data[i + 1] << 8; + raw_data = cpu_to_le16(d); + outw(raw_data, hw->base_port); + } + while ((i & 3) != 2) { + outw((unsigned short) 0xDEAD, hw->base_port); + i += 2; + } + writew(MEMRX_RX, &hw->memory_info_regs->memreg_rx); + } + + spin_unlock_irqrestore(&hw->lock, flags); + + end_write_timing(length); +} + +static void do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet) +{ + unsigned short fragment_data_len; + unsigned short data_left = packet->length - packet->offset; + unsigned short header_size; + union nl_packet pkt; + + header_size = + (packet->fragment_count == 0) + ? NL_FIRST_PACKET_HEADER_SIZE + : NL_FOLLOWING_PACKET_HEADER_SIZE; + fragment_data_len = hw->ll_mtu - header_size; + if (data_left < fragment_data_len) + fragment_data_len = data_left; + + /* + * hdr_first is now in machine bitfield order, which will be swapped + * to le just before it goes to hw + */ + pkt.hdr_first.protocol = packet->protocol; + pkt.hdr_first.address = packet->dest_addr; + pkt.hdr_first.packet_rank = 0; + + /* First packet? */ + if (packet->fragment_count == 0) { + pkt.hdr_first.packet_rank |= NL_FIRST_PACKET; + pkt.hdr_first.length_lsb = (unsigned char) packet->length; + pkt.hdr_first.length_msb = + (unsigned char) (packet->length >> 8); + } + + memcpy(pkt.rawpkt + header_size, + ((unsigned char *) packet) + sizeof(struct ipw_tx_packet) + + packet->offset, fragment_data_len); + packet->offset += fragment_data_len; + packet->fragment_count++; + + /* Last packet? (May also be first packet.) */ + if (packet->offset == packet->length) + pkt.hdr_first.packet_rank |= NL_LAST_PACKET; + do_send_fragment(hw, pkt.rawpkt, header_size + fragment_data_len); + + /* If this packet has unsent data, then re-queue it. */ + if (packet->offset < packet->length) { + /* + * Re-queue it at the head of the highest priority queue so + * it goes before all other packets + */ + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + list_add(&packet->queue, &hw->tx_queue[0]); + hw->tx_queued++; + spin_unlock_irqrestore(&hw->lock, flags); + } else { + if (packet->packet_callback) + packet->packet_callback(packet->callback_data, + packet->length); + kfree(packet); + } +} + +static void ipw_setup_hardware(struct ipw_hardware *hw) +{ + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->hw_version == HW_VERSION_1) { + /* Reset RX FIFO */ + outw(DCR_RXRESET, hw->base_port + IODCR); + /* SB: Reset TX FIFO */ + outw(DCR_TXRESET, hw->base_port + IODCR); + + /* Enable TX and RX interrupts. */ + outw(IER_TXENABLED | IER_RXENABLED, hw->base_port + IOIER); + } else { + /* + * Set INTRACK bit (bit 0), which means we must explicitly + * acknowledge interrupts by clearing bit 2 of reg_config_and_status. + */ + unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status); + + csr |= 1; + writew(csr, &hw->memregs_CCR->reg_config_and_status); + } + spin_unlock_irqrestore(&hw->lock, flags); +} + +/* + * If 'packet' is NULL, then this function allocates a new packet, setting its + * length to 0 and ensuring it has the specified minimum amount of free space. + * + * If 'packet' is not NULL, then this function enlarges it if it doesn't + * have the specified minimum amount of free space. + * + */ +static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw, + struct ipw_rx_packet *packet, + int minimum_free_space) +{ + + if (!packet) { + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + if (!list_empty(&hw->rx_pool)) { + packet = list_first_entry(&hw->rx_pool, + struct ipw_rx_packet, queue); + hw->rx_pool_size--; + spin_unlock_irqrestore(&hw->lock, flags); + list_del(&packet->queue); + } else { + const int min_capacity = + ipwireless_ppp_mru(hw->network) + 2; + int new_capacity; + + spin_unlock_irqrestore(&hw->lock, flags); + new_capacity = + (minimum_free_space > min_capacity + ? minimum_free_space + : min_capacity); + packet = kmalloc(sizeof(struct ipw_rx_packet) + + new_capacity, GFP_ATOMIC); + if (!packet) + return NULL; + packet->capacity = new_capacity; + } + packet->length = 0; + } + + if (packet->length + minimum_free_space > packet->capacity) { + struct ipw_rx_packet *old_packet = packet; + + packet = kmalloc(sizeof(struct ipw_rx_packet) + + old_packet->length + minimum_free_space, + GFP_ATOMIC); + if (!packet) { + kfree(old_packet); + return NULL; + } + memcpy(packet, old_packet, + sizeof(struct ipw_rx_packet) + + old_packet->length); + packet->capacity = old_packet->length + minimum_free_space; + kfree(old_packet); + } + + return packet; +} + +static void pool_free(struct ipw_hardware *hw, struct ipw_rx_packet *packet) +{ + if (hw->rx_pool_size > 6) + kfree(packet); + else { + hw->rx_pool_size++; + list_add(&packet->queue, &hw->rx_pool); + } +} + +static void queue_received_packet(struct ipw_hardware *hw, + unsigned int protocol, + unsigned int address, + const unsigned char *data, int length, + int is_last) +{ + unsigned int channel_idx = address - 1; + struct ipw_rx_packet *packet = NULL; + unsigned long flags; + + /* Discard packet if channel index is out of range. */ + if (channel_idx >= NL_NUM_OF_ADDRESSES) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": data packet has bad address %u\n", address); + return; + } + + /* + * ->packet_assembler is safe to touch unlocked, this is the only place + */ + if (protocol == TL_PROTOCOLID_COM_DATA) { + struct ipw_rx_packet **assem = + &hw->packet_assembler[channel_idx]; + + /* + * Create a new packet, or assembler already contains one + * enlarge it by 'length' bytes. + */ + (*assem) = pool_allocate(hw, *assem, length); + if (!(*assem)) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": no memory for incomming data packet, dropped!\n"); + return; + } + (*assem)->protocol = protocol; + (*assem)->channel_idx = channel_idx; + + /* Append this packet data onto existing data. */ + memcpy((unsigned char *)(*assem) + + sizeof(struct ipw_rx_packet) + + (*assem)->length, data, length); + (*assem)->length += length; + if (is_last) { + packet = *assem; + *assem = NULL; + /* Count queued DATA bytes only */ + spin_lock_irqsave(&hw->lock, flags); + hw->rx_bytes_queued += packet->length; + spin_unlock_irqrestore(&hw->lock, flags); + } + } else { + /* If it's a CTRL packet, don't assemble, just queue it. */ + packet = pool_allocate(hw, NULL, length); + if (!packet) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": no memory for incomming ctrl packet, dropped!\n"); + return; + } + packet->protocol = protocol; + packet->channel_idx = channel_idx; + memcpy((unsigned char *)packet + sizeof(struct ipw_rx_packet), + data, length); + packet->length = length; + } + + /* + * If this is the last packet, then send the assembled packet on to the + * network layer. + */ + if (packet) { + spin_lock_irqsave(&hw->lock, flags); + list_add_tail(&packet->queue, &hw->rx_queue); + /* Block reception of incoming packets if queue is full. */ + hw->blocking_rx = + (hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE); + + spin_unlock_irqrestore(&hw->lock, flags); + schedule_work(&hw->work_rx); + } +} + +/* + * Workqueue callback + */ +static void ipw_receive_data_work(struct work_struct *work_rx) +{ + struct ipw_hardware *hw = + container_of(work_rx, struct ipw_hardware, work_rx); + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + while (!list_empty(&hw->rx_queue)) { + struct ipw_rx_packet *packet = + list_first_entry(&hw->rx_queue, + struct ipw_rx_packet, queue); + + if (hw->shutting_down) + break; + list_del(&packet->queue); + + /* + * Note: ipwireless_network_packet_received must be called in a + * process context (i.e. via schedule_work) because the tty + * output code can sleep in the tty_flip_buffer_push call. + */ + if (packet->protocol == TL_PROTOCOLID_COM_DATA) { + if (hw->network != NULL) { + /* If the network hasn't been disconnected. */ + spin_unlock_irqrestore(&hw->lock, flags); + /* + * This must run unlocked due to tty processing + * and mutex locking + */ + ipwireless_network_packet_received( + hw->network, + packet->channel_idx, + (unsigned char *)packet + + sizeof(struct ipw_rx_packet), + packet->length); + spin_lock_irqsave(&hw->lock, flags); + } + /* Count queued DATA bytes only */ + hw->rx_bytes_queued -= packet->length; + } else { + /* + * This is safe to be called locked, callchain does + * not block + */ + handle_received_CTRL_packet(hw, packet->channel_idx, + (unsigned char *)packet + + sizeof(struct ipw_rx_packet), + packet->length); + } + pool_free(hw, packet); + /* + * Unblock reception of incoming packets if queue is no longer + * full. + */ + hw->blocking_rx = + hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE; + if (hw->shutting_down) + break; + } + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void handle_received_CTRL_packet(struct ipw_hardware *hw, + unsigned int channel_idx, + const unsigned char *data, int len) +{ + const struct ipw_control_packet_body *body = + (const struct ipw_control_packet_body *) data; + unsigned int changed_mask; + + if (len != sizeof(struct ipw_control_packet_body)) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": control packet was %d bytes - wrong size!\n", + len); + return; + } + + switch (body->sig_no) { + case COMCTRL_CTS: + changed_mask = IPW_CONTROL_LINE_CTS; + break; + case COMCTRL_DCD: + changed_mask = IPW_CONTROL_LINE_DCD; + break; + case COMCTRL_DSR: + changed_mask = IPW_CONTROL_LINE_DSR; + break; + case COMCTRL_RI: + changed_mask = IPW_CONTROL_LINE_RI; + break; + default: + changed_mask = 0; + } + + if (changed_mask != 0) { + if (body->value) + hw->control_lines[channel_idx] |= changed_mask; + else + hw->control_lines[channel_idx] &= ~changed_mask; + if (hw->network) + ipwireless_network_notify_control_line_change( + hw->network, + channel_idx, + hw->control_lines[channel_idx], + changed_mask); + } +} + +static void handle_received_packet(struct ipw_hardware *hw, + const union nl_packet *packet, + unsigned short len) +{ + unsigned int protocol = packet->hdr.protocol; + unsigned int address = packet->hdr.address; + unsigned int header_length; + const unsigned char *data; + unsigned int data_len; + int is_last = packet->hdr.packet_rank & NL_LAST_PACKET; + + if (packet->hdr.packet_rank & NL_FIRST_PACKET) + header_length = NL_FIRST_PACKET_HEADER_SIZE; + else + header_length = NL_FOLLOWING_PACKET_HEADER_SIZE; + + data = packet->rawpkt + header_length; + data_len = len - header_length; + switch (protocol) { + case TL_PROTOCOLID_COM_DATA: + case TL_PROTOCOLID_COM_CTRL: + queue_received_packet(hw, protocol, address, data, data_len, + is_last); + break; + case TL_PROTOCOLID_SETUP: + handle_received_SETUP_packet(hw, address, data, data_len, + is_last); + break; + } +} + +static void acknowledge_data_read(struct ipw_hardware *hw) +{ + if (hw->hw_version == HW_VERSION_1) + outw(DCR_RXDONE, hw->base_port + IODCR); + else + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); +} + +/* + * Retrieve a packet from the IPW hardware. + */ +static void do_receive_packet(struct ipw_hardware *hw) +{ + unsigned len; + unsigned i; + unsigned char pkt[LL_MTU_MAX]; + + start_timing(); + + if (hw->hw_version == HW_VERSION_1) { + len = inw(hw->base_port + IODRR); + if (len > hw->ll_mtu) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": received a packet of %u bytes - longer than the MTU!\n", len); + outw(DCR_RXDONE | DCR_RXRESET, hw->base_port + IODCR); + return; + } + + for (i = 0; i < len; i += 2) { + __le16 raw_data = inw(hw->base_port + IODRR); + unsigned short data = le16_to_cpu(raw_data); + + pkt[i] = (unsigned char) data; + pkt[i + 1] = (unsigned char) (data >> 8); + } + } else { + len = inw(hw->base_port); + if (len > hw->ll_mtu) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": received a packet of %u bytes - longer than the MTU!\n", len); + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); + return; + } + + for (i = 0; i < len; i += 2) { + __le16 raw_data = inw(hw->base_port); + unsigned short data = le16_to_cpu(raw_data); + + pkt[i] = (unsigned char) data; + pkt[i + 1] = (unsigned char) (data >> 8); + } + + while ((i & 3) != 2) { + inw(hw->base_port); + i += 2; + } + } + + acknowledge_data_read(hw); + + swap_packet_bitfield_from_le(pkt); + + if (ipwireless_debug) + dump_data_bytes("recv", pkt, len); + + handle_received_packet(hw, (union nl_packet *) pkt, len); + + end_read_timing(len); +} + +static int get_current_packet_priority(struct ipw_hardware *hw) +{ + /* + * If we're initializing, don't send anything of higher priority than + * PRIO_SETUP. The network layer therefore need not care about + * hardware initialization - any of its stuff will simply be queued + * until setup is complete. + */ + return (hw->to_setup || hw->initializing + ? PRIO_SETUP + 1 : NL_NUM_OF_PRIORITIES); +} + +/* + * return 1 if something has been received from hw + */ +static int get_packets_from_hw(struct ipw_hardware *hw) +{ + int received = 0; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + while (hw->rx_ready && !hw->blocking_rx) { + received = 1; + hw->rx_ready--; + spin_unlock_irqrestore(&hw->lock, flags); + + do_receive_packet(hw); + + spin_lock_irqsave(&hw->lock, flags); + } + spin_unlock_irqrestore(&hw->lock, flags); + + return received; +} + +/* + * Send pending packet up to given priority, prioritize SETUP data until + * hardware is fully setup. + * + * return 1 if more packets can be sent + */ +static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) +{ + int more_to_send = 0; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->tx_queued && hw->tx_ready) { + int priority; + struct ipw_tx_packet *packet = NULL; + + /* Pick a packet */ + for (priority = 0; priority < priority_limit; priority++) { + if (!list_empty(&hw->tx_queue[priority])) { + packet = list_first_entry( + &hw->tx_queue[priority], + struct ipw_tx_packet, + queue); + + hw->tx_queued--; + list_del(&packet->queue); + + break; + } + } + if (!packet) { + hw->tx_queued = 0; + spin_unlock_irqrestore(&hw->lock, flags); + return 0; + } + + spin_unlock_irqrestore(&hw->lock, flags); + + /* Send */ + do_send_packet(hw, packet); + + /* Check if more to send */ + spin_lock_irqsave(&hw->lock, flags); + for (priority = 0; priority < priority_limit; priority++) + if (!list_empty(&hw->tx_queue[priority])) { + more_to_send = 1; + break; + } + + if (!more_to_send) + hw->tx_queued = 0; + } + spin_unlock_irqrestore(&hw->lock, flags); + + return more_to_send; +} + +/* + * Send and receive all queued packets. + */ +static void ipwireless_do_tasklet(unsigned long hw_) +{ + struct ipw_hardware *hw = (struct ipw_hardware *) hw_; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->shutting_down) { + spin_unlock_irqrestore(&hw->lock, flags); + return; + } + + if (hw->to_setup == 1) { + /* + * Initial setup data sent to hardware + */ + hw->to_setup = 2; + spin_unlock_irqrestore(&hw->lock, flags); + + ipw_setup_hardware(hw); + ipw_send_setup_packet(hw); + + send_pending_packet(hw, PRIO_SETUP + 1); + get_packets_from_hw(hw); + } else { + int priority_limit = get_current_packet_priority(hw); + int again; + + spin_unlock_irqrestore(&hw->lock, flags); + + do { + again = send_pending_packet(hw, priority_limit); + again |= get_packets_from_hw(hw); + } while (again); + } +} + +/* + * return true if the card is physically present. + */ +static int is_card_present(struct ipw_hardware *hw) +{ + if (hw->hw_version == HW_VERSION_1) + return inw(hw->base_port + IOIR) != 0xFFFF; + else + return readl(&hw->memory_info_regs->memreg_card_present) == + CARD_PRESENT_VALUE; +} + +static irqreturn_t ipwireless_handle_v1_interrupt(int irq, + struct ipw_hardware *hw) +{ + unsigned short irqn; + + irqn = inw(hw->base_port + IOIR); + + /* Check if card is present */ + if (irqn == 0xFFFF) + return IRQ_NONE; + else if (irqn != 0) { + unsigned short ack = 0; + unsigned long flags; + + /* Transmit complete. */ + if (irqn & IR_TXINTR) { + ack |= IR_TXINTR; + spin_lock_irqsave(&hw->lock, flags); + hw->tx_ready = 1; + spin_unlock_irqrestore(&hw->lock, flags); + } + /* Received data */ + if (irqn & IR_RXINTR) { + ack |= IR_RXINTR; + spin_lock_irqsave(&hw->lock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->lock, flags); + } + if (ack != 0) { + outw(ack, hw->base_port + IOIR); + tasklet_schedule(&hw->tasklet); + } + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static void acknowledge_pcmcia_interrupt(struct ipw_hardware *hw) +{ + unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status); + + csr &= 0xfffd; + writew(csr, &hw->memregs_CCR->reg_config_and_status); +} + +static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq, + struct ipw_hardware *hw) +{ + int tx = 0; + int rx = 0; + int rx_repeat = 0; + int try_mem_tx_old; + unsigned long flags; + + do { + + unsigned short memtx = readw(hw->memreg_tx); + unsigned short memtx_serial; + unsigned short memrxdone = + readw(&hw->memory_info_regs->memreg_rx_done); + + try_mem_tx_old = 0; + + /* check whether the interrupt was generated by ipwireless card */ + if (!(memtx & MEMTX_TX) && !(memrxdone & MEMRX_RX_DONE)) { + + /* check if the card uses memreg_tx_old register */ + if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + memtx = readw(&hw->memory_info_regs->memreg_tx_old); + if (memtx & MEMTX_TX) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": Using memreg_tx_old\n"); + hw->memreg_tx = + &hw->memory_info_regs->memreg_tx_old; + } else { + return IRQ_NONE; + } + } else + return IRQ_NONE; + } + + /* + * See if the card is physically present. Note that while it is + * powering up, it appears not to be present. + */ + if (!is_card_present(hw)) { + acknowledge_pcmcia_interrupt(hw); + return IRQ_HANDLED; + } + + memtx_serial = memtx & (unsigned short) 0xff00; + if (memtx & MEMTX_TX) { + writew(memtx_serial, hw->memreg_tx); + + if (hw->serial_number_detected) { + if (memtx_serial != hw->last_memtx_serial) { + hw->last_memtx_serial = memtx_serial; + spin_lock_irqsave(&hw->lock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->lock, flags); + rx = 1; + } else + /* Ignore 'Timer Recovery' duplicates. */ + rx_repeat = 1; + } else { + /* + * If a non-zero serial number is seen, then enable + * serial number checking. + */ + if (memtx_serial != 0) { + hw->serial_number_detected = 1; + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": memreg_tx serial num detected\n"); + + spin_lock_irqsave(&hw->lock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->lock, flags); + } + rx = 1; + } + } + if (memrxdone & MEMRX_RX_DONE) { + writew(0, &hw->memory_info_regs->memreg_rx_done); + spin_lock_irqsave(&hw->lock, flags); + hw->tx_ready = 1; + spin_unlock_irqrestore(&hw->lock, flags); + tx = 1; + } + if (tx) + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); + + acknowledge_pcmcia_interrupt(hw); + + if (tx || rx) + tasklet_schedule(&hw->tasklet); + else if (!rx_repeat) { + if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + if (hw->serial_number_detected) + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": spurious interrupt - new_tx mode\n"); + else { + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": no valid memreg_tx value - switching to the old memreg_tx\n"); + hw->memreg_tx = + &hw->memory_info_regs->memreg_tx_old; + try_mem_tx_old = 1; + } + } else + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": spurious interrupt - old_tx mode\n"); + } + + } while (try_mem_tx_old == 1); + + return IRQ_HANDLED; +} + +irqreturn_t ipwireless_interrupt(int irq, void *dev_id) +{ + struct ipw_dev *ipw = dev_id; + + if (ipw->hardware->hw_version == HW_VERSION_1) + return ipwireless_handle_v1_interrupt(irq, ipw->hardware); + else + return ipwireless_handle_v2_v3_interrupt(irq, ipw->hardware); +} + +static void flush_packets_to_hw(struct ipw_hardware *hw) +{ + int priority_limit; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + priority_limit = get_current_packet_priority(hw); + spin_unlock_irqrestore(&hw->lock, flags); + + while (send_pending_packet(hw, priority_limit)); +} + +static void send_packet(struct ipw_hardware *hw, int priority, + struct ipw_tx_packet *packet) +{ + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + list_add_tail(&packet->queue, &hw->tx_queue[priority]); + hw->tx_queued++; + spin_unlock_irqrestore(&hw->lock, flags); + + flush_packets_to_hw(hw); +} + +/* Create data packet, non-atomic allocation */ +static void *alloc_data_packet(int data_size, + unsigned char dest_addr, + unsigned char protocol) +{ + struct ipw_tx_packet *packet = kzalloc( + sizeof(struct ipw_tx_packet) + data_size, + GFP_ATOMIC); + + if (!packet) + return NULL; + + INIT_LIST_HEAD(&packet->queue); + packet->dest_addr = dest_addr; + packet->protocol = protocol; + packet->length = data_size; + + return packet; +} + +static void *alloc_ctrl_packet(int header_size, + unsigned char dest_addr, + unsigned char protocol, + unsigned char sig_no) +{ + /* + * sig_no is located right after ipw_tx_packet struct in every + * CTRL or SETUP packets, we can use ipw_control_packet as a + * common struct + */ + struct ipw_control_packet *packet = kzalloc(header_size, GFP_ATOMIC); + + if (!packet) + return NULL; + + INIT_LIST_HEAD(&packet->header.queue); + packet->header.dest_addr = dest_addr; + packet->header.protocol = protocol; + packet->header.length = header_size - sizeof(struct ipw_tx_packet); + packet->body.sig_no = sig_no; + + return packet; +} + +int ipwireless_send_packet(struct ipw_hardware *hw, unsigned int channel_idx, + const unsigned char *data, unsigned int length, + void (*callback) (void *cb, unsigned int length), + void *callback_data) +{ + struct ipw_tx_packet *packet; + + packet = alloc_data_packet(length, (channel_idx + 1), + TL_PROTOCOLID_COM_DATA); + if (!packet) + return -ENOMEM; + packet->packet_callback = callback; + packet->callback_data = callback_data; + memcpy((unsigned char *) packet + sizeof(struct ipw_tx_packet), data, + length); + + send_packet(hw, PRIO_DATA, packet); + return 0; +} + +static int set_control_line(struct ipw_hardware *hw, int prio, + unsigned int channel_idx, int line, int state) +{ + struct ipw_control_packet *packet; + int protocolid = TL_PROTOCOLID_COM_CTRL; + + if (prio == PRIO_SETUP) + protocolid = TL_PROTOCOLID_SETUP; + + packet = alloc_ctrl_packet(sizeof(struct ipw_control_packet), + (channel_idx + 1), protocolid, line); + if (!packet) + return -ENOMEM; + packet->header.length = sizeof(struct ipw_control_packet_body); + packet->body.value = (state == 0 ? 0 : 1); + send_packet(hw, prio, &packet->header); + return 0; +} + + +static int set_DTR(struct ipw_hardware *hw, int priority, + unsigned int channel_idx, int state) +{ + if (state != 0) + hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_DTR; + else + hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_DTR; + + return set_control_line(hw, priority, channel_idx, COMCTRL_DTR, state); +} + +static int set_RTS(struct ipw_hardware *hw, int priority, + unsigned int channel_idx, int state) +{ + if (state != 0) + hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_RTS; + else + hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_RTS; + + return set_control_line(hw, priority, channel_idx, COMCTRL_RTS, state); +} + +int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx, + int state) +{ + return set_DTR(hw, PRIO_CTRL, channel_idx, state); +} + +int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx, + int state) +{ + return set_RTS(hw, PRIO_CTRL, channel_idx, state); +} + +struct ipw_setup_get_version_query_packet { + struct ipw_tx_packet header; + struct tl_setup_get_version_qry body; +}; + +struct ipw_setup_config_packet { + struct ipw_tx_packet header; + struct tl_setup_config_msg body; +}; + +struct ipw_setup_config_done_packet { + struct ipw_tx_packet header; + struct tl_setup_config_done_msg body; +}; + +struct ipw_setup_open_packet { + struct ipw_tx_packet header; + struct tl_setup_open_msg body; +}; + +struct ipw_setup_info_packet { + struct ipw_tx_packet header; + struct tl_setup_info_msg body; +}; + +struct ipw_setup_reboot_msg_ack { + struct ipw_tx_packet header; + struct TlSetupRebootMsgAck body; +}; + +/* This handles the actual initialization of the card */ +static void __handle_setup_get_version_rsp(struct ipw_hardware *hw) +{ + struct ipw_setup_config_packet *config_packet; + struct ipw_setup_config_done_packet *config_done_packet; + struct ipw_setup_open_packet *open_packet; + struct ipw_setup_info_packet *info_packet; + int port; + unsigned int channel_idx; + + /* generate config packet */ + for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) { + config_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_config_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_CONFIG_MSG); + if (!config_packet) + goto exit_nomem; + config_packet->header.length = sizeof(struct tl_setup_config_msg); + config_packet->body.port_no = port; + config_packet->body.prio_data = PRIO_DATA; + config_packet->body.prio_ctrl = PRIO_CTRL; + send_packet(hw, PRIO_SETUP, &config_packet->header); + } + config_done_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_config_done_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_CONFIG_DONE_MSG); + if (!config_done_packet) + goto exit_nomem; + config_done_packet->header.length = sizeof(struct tl_setup_config_done_msg); + send_packet(hw, PRIO_SETUP, &config_done_packet->header); + + /* generate open packet */ + for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) { + open_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_open_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_OPEN_MSG); + if (!open_packet) + goto exit_nomem; + open_packet->header.length = sizeof(struct tl_setup_open_msg); + open_packet->body.port_no = port; + send_packet(hw, PRIO_SETUP, &open_packet->header); + } + for (channel_idx = 0; + channel_idx < NL_NUM_OF_ADDRESSES; channel_idx++) { + int ret; + + ret = set_DTR(hw, PRIO_SETUP, channel_idx, + (hw->control_lines[channel_idx] & + IPW_CONTROL_LINE_DTR) != 0); + if (ret) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": error setting DTR (%d)\n", ret); + return; + } + + set_RTS(hw, PRIO_SETUP, channel_idx, + (hw->control_lines [channel_idx] & + IPW_CONTROL_LINE_RTS) != 0); + if (ret) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": error setting RTS (%d)\n", ret); + return; + } + } + /* + * For NDIS we assume that we are using sync PPP frames, for COM async. + * This driver uses NDIS mode too. We don't bother with translation + * from async -> sync PPP. + */ + info_packet = alloc_ctrl_packet(sizeof(struct ipw_setup_info_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_INFO_MSG); + if (!info_packet) + goto exit_nomem; + info_packet->header.length = sizeof(struct tl_setup_info_msg); + info_packet->body.driver_type = NDISWAN_DRIVER; + info_packet->body.major_version = NDISWAN_DRIVER_MAJOR_VERSION; + info_packet->body.minor_version = NDISWAN_DRIVER_MINOR_VERSION; + send_packet(hw, PRIO_SETUP, &info_packet->header); + + /* Initialization is now complete, so we clear the 'to_setup' flag */ + hw->to_setup = 0; + + return; + +exit_nomem: + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": not enough memory to alloc control packet\n"); + hw->to_setup = -1; +} + +static void handle_setup_get_version_rsp(struct ipw_hardware *hw, + unsigned char vers_no) +{ + del_timer(&hw->setup_timer); + hw->initializing = 0; + printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": card is ready.\n"); + + if (vers_no == TL_SETUP_VERSION) + __handle_setup_get_version_rsp(hw); + else + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": invalid hardware version no %u\n", + (unsigned int) vers_no); +} + +static void ipw_send_setup_packet(struct ipw_hardware *hw) +{ + struct ipw_setup_get_version_query_packet *ver_packet; + + ver_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_get_version_query_packet), + ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_GET_VERSION_QRY); + ver_packet->header.length = sizeof(struct tl_setup_get_version_qry); + + /* + * Response is handled in handle_received_SETUP_packet + */ + send_packet(hw, PRIO_SETUP, &ver_packet->header); +} + +static void handle_received_SETUP_packet(struct ipw_hardware *hw, + unsigned int address, + const unsigned char *data, int len, + int is_last) +{ + const union ipw_setup_rx_msg *rx_msg = (const union ipw_setup_rx_msg *) data; + + if (address != ADDR_SETUP_PROT) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": setup packet has bad address %d\n", address); + return; + } + + switch (rx_msg->sig_no) { + case TL_SETUP_SIGNO_GET_VERSION_RSP: + if (hw->to_setup) + handle_setup_get_version_rsp(hw, + rx_msg->version_rsp_msg.version); + break; + + case TL_SETUP_SIGNO_OPEN_MSG: + if (ipwireless_debug) { + unsigned int channel_idx = rx_msg->open_msg.port_no - 1; + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": OPEN_MSG [channel %u] reply received\n", + channel_idx); + } + break; + + case TL_SETUP_SIGNO_INFO_MSG_ACK: + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": card successfully configured as NDISWAN\n"); + break; + + case TL_SETUP_SIGNO_REBOOT_MSG: + if (hw->to_setup) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": Setup not completed - ignoring reboot msg\n"); + else { + struct ipw_setup_reboot_msg_ack *packet; + + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": Acknowledging REBOOT message\n"); + packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_reboot_msg_ack), + ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_REBOOT_MSG_ACK); + packet->header.length = + sizeof(struct TlSetupRebootMsgAck); + send_packet(hw, PRIO_SETUP, &packet->header); + if (hw->reboot_callback) + hw->reboot_callback(hw->reboot_callback_data); + } + break; + + default: + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": unknown setup message %u received\n", + (unsigned int) rx_msg->sig_no); + } +} + +static void do_close_hardware(struct ipw_hardware *hw) +{ + unsigned int irqn; + + if (hw->hw_version == HW_VERSION_1) { + /* Disable TX and RX interrupts. */ + outw(0, hw->base_port + IOIER); + + /* Acknowledge any outstanding interrupt requests */ + irqn = inw(hw->base_port + IOIR); + if (irqn & IR_TXINTR) + outw(IR_TXINTR, hw->base_port + IOIR); + if (irqn & IR_RXINTR) + outw(IR_RXINTR, hw->base_port + IOIR); + + synchronize_irq(hw->irq); + } +} + +struct ipw_hardware *ipwireless_hardware_create(void) +{ + int i; + struct ipw_hardware *hw = + kzalloc(sizeof(struct ipw_hardware), GFP_KERNEL); + + if (!hw) + return NULL; + + hw->irq = -1; + hw->initializing = 1; + hw->tx_ready = 1; + hw->rx_bytes_queued = 0; + hw->rx_pool_size = 0; + hw->last_memtx_serial = (unsigned short) 0xffff; + for (i = 0; i < NL_NUM_OF_PRIORITIES; i++) + INIT_LIST_HEAD(&hw->tx_queue[i]); + + INIT_LIST_HEAD(&hw->rx_queue); + INIT_LIST_HEAD(&hw->rx_pool); + spin_lock_init(&hw->lock); + tasklet_init(&hw->tasklet, ipwireless_do_tasklet, (unsigned long) hw); + INIT_WORK(&hw->work_rx, ipw_receive_data_work); + setup_timer(&hw->setup_timer, ipwireless_setup_timer, + (unsigned long) hw); + + return hw; +} + +void ipwireless_init_hardware_v1(struct ipw_hardware *hw, + unsigned int base_port, + void __iomem *attr_memory, + void __iomem *common_memory, + int is_v2_card, + void (*reboot_callback) (void *data), + void *reboot_callback_data) +{ + if (hw->removed) { + hw->removed = 0; + enable_irq(hw->irq); + } + hw->base_port = base_port; + hw->hw_version = (is_v2_card ? HW_VERSION_2 : HW_VERSION_1); + hw->ll_mtu = (hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2); + hw->memregs_CCR = (struct MEMCCR __iomem *) + ((unsigned short __iomem *) attr_memory + 0x200); + hw->memory_info_regs = (struct MEMINFREG __iomem *) common_memory; + hw->memreg_tx = &hw->memory_info_regs->memreg_tx_new; + hw->reboot_callback = reboot_callback; + hw->reboot_callback_data = reboot_callback_data; +} + +void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw) +{ + hw->initializing = 1; + hw->init_loops = 0; + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": waiting for card to start up...\n"); + ipwireless_setup_timer((unsigned long) hw); +} + +static void ipwireless_setup_timer(unsigned long data) +{ + struct ipw_hardware *hw = (struct ipw_hardware *) data; + + hw->init_loops++; + + if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY && + hw->hw_version == HW_VERSION_2 && + hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": failed to startup using TX2, trying TX\n"); + + hw->memreg_tx = &hw->memory_info_regs->memreg_tx_old; + hw->init_loops = 0; + } + /* Give up after a certain number of retries */ + if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": card failed to start up!\n"); + hw->initializing = 0; + } else { + /* Do not attempt to write to the board if it is not present. */ + if (is_card_present(hw)) { + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + hw->to_setup = 1; + hw->tx_ready = 1; + spin_unlock_irqrestore(&hw->lock, flags); + tasklet_schedule(&hw->tasklet); + } + + mod_timer(&hw->setup_timer, + jiffies + msecs_to_jiffies(TL_SETUP_VERSION_QRY_TMO)); + } +} + +/* + * Stop any interrupts from executing so that, once this function returns, + * other layers of the driver can be sure they won't get any more callbacks. + * Thus must be called on a proper process context. + */ +void ipwireless_stop_interrupts(struct ipw_hardware *hw) +{ + if (!hw->shutting_down) { + /* Tell everyone we are going down. */ + hw->shutting_down = 1; + del_timer(&hw->setup_timer); + + /* Prevent the hardware from sending any more interrupts */ + do_close_hardware(hw); + } +} + +void ipwireless_hardware_free(struct ipw_hardware *hw) +{ + int i; + struct ipw_rx_packet *rp, *rq; + struct ipw_tx_packet *tp, *tq; + + ipwireless_stop_interrupts(hw); + + flush_work_sync(&hw->work_rx); + + for (i = 0; i < NL_NUM_OF_ADDRESSES; i++) + if (hw->packet_assembler[i] != NULL) + kfree(hw->packet_assembler[i]); + + for (i = 0; i < NL_NUM_OF_PRIORITIES; i++) + list_for_each_entry_safe(tp, tq, &hw->tx_queue[i], queue) { + list_del(&tp->queue); + kfree(tp); + } + + list_for_each_entry_safe(rp, rq, &hw->rx_queue, queue) { + list_del(&rp->queue); + kfree(rp); + } + + list_for_each_entry_safe(rp, rq, &hw->rx_pool, queue) { + list_del(&rp->queue); + kfree(rp); + } + kfree(hw); +} + +/* + * Associate the specified network with this hardware, so it will receive events + * from it. + */ +void ipwireless_associate_network(struct ipw_hardware *hw, + struct ipw_network *network) +{ + hw->network = network; +} diff --git a/drivers/tty/ipwireless/hardware.h b/drivers/tty/ipwireless/hardware.h new file mode 100644 index 000000000000..90a8590e43b0 --- /dev/null +++ b/drivers/tty/ipwireless/hardware.h @@ -0,0 +1,62 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_HARDWARE_H_ +#define _IPWIRELESS_CS_HARDWARE_H_ + +#include +#include +#include + +#define IPW_CONTROL_LINE_CTS 0x0001 +#define IPW_CONTROL_LINE_DCD 0x0002 +#define IPW_CONTROL_LINE_DSR 0x0004 +#define IPW_CONTROL_LINE_RI 0x0008 +#define IPW_CONTROL_LINE_DTR 0x0010 +#define IPW_CONTROL_LINE_RTS 0x0020 + +struct ipw_hardware; +struct ipw_network; + +struct ipw_hardware *ipwireless_hardware_create(void); +void ipwireless_hardware_free(struct ipw_hardware *hw); +irqreturn_t ipwireless_interrupt(int irq, void *dev_id); +int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx, + int state); +int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx, + int state); +int ipwireless_send_packet(struct ipw_hardware *hw, + unsigned int channel_idx, + const unsigned char *data, + unsigned int length, + void (*packet_sent_callback) (void *cb, + unsigned int length), + void *sent_cb_data); +void ipwireless_associate_network(struct ipw_hardware *hw, + struct ipw_network *net); +void ipwireless_stop_interrupts(struct ipw_hardware *hw); +void ipwireless_init_hardware_v1(struct ipw_hardware *hw, + unsigned int base_port, + void __iomem *attr_memory, + void __iomem *common_memory, + int is_v2_card, + void (*reboot_cb) (void *data), + void *reboot_cb_data); +void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw); +void ipwireless_sleep(unsigned int tenths); + +#endif diff --git a/drivers/tty/ipwireless/main.c b/drivers/tty/ipwireless/main.c new file mode 100644 index 000000000000..94b8eb4d691d --- /dev/null +++ b/drivers/tty/ipwireless/main.c @@ -0,0 +1,335 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include "hardware.h" +#include "network.h" +#include "main.h" +#include "tty.h" + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static struct pcmcia_device_id ipw_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), + PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0200), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, ipw_ids); + +static void ipwireless_detach(struct pcmcia_device *link); + +/* + * Module params + */ +/* Debug mode: more verbose, print sent/recv bytes */ +int ipwireless_debug; +int ipwireless_loopback; +int ipwireless_out_queue = 10; + +module_param_named(debug, ipwireless_debug, int, 0); +module_param_named(loopback, ipwireless_loopback, int, 0); +module_param_named(out_queue, ipwireless_out_queue, int, 0); +MODULE_PARM_DESC(debug, "switch on debug messages [0]"); +MODULE_PARM_DESC(loopback, + "debug: enable ras_raw channel [0]"); +MODULE_PARM_DESC(out_queue, "debug: set size of outgoing PPP queue [10]"); + +/* Executes in process context. */ +static void signalled_reboot_work(struct work_struct *work_reboot) +{ + struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev, + work_reboot); + struct pcmcia_device *link = ipw->link; + pcmcia_reset_card(link->socket); +} + +static void signalled_reboot_callback(void *callback_data) +{ + struct ipw_dev *ipw = (struct ipw_dev *) callback_data; + + /* Delegate to process context. */ + schedule_work(&ipw->work_reboot); +} + +static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) +{ + struct ipw_dev *ipw = priv_data; + struct resource *io_resource; + int ret; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + + /* 0x40 causes it to generate level mode interrupts. */ + /* 0x04 enables IREQ pin. */ + p_dev->config_index |= 0x44; + p_dev->io_lines = 16; + ret = pcmcia_request_io(p_dev); + if (ret) + return ret; + + io_resource = request_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0]), + IPWIRELESS_PCCARD_NAME); + + p_dev->resource[2]->flags |= + WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; + + ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0); + if (ret != 0) + goto exit1; + + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); + if (ret != 0) + goto exit2; + + ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; + + ipw->attr_memory = ioremap(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); + request_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2]), + IPWIRELESS_PCCARD_NAME); + + p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + p_dev->resource[3]->end = 0; /* this used to be 0x1000 */ + ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0); + if (ret != 0) + goto exit2; + + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0); + if (ret != 0) + goto exit3; + + ipw->attr_memory = ioremap(p_dev->resource[3]->start, + resource_size(p_dev->resource[3])); + request_mem_region(p_dev->resource[3]->start, + resource_size(p_dev->resource[3]), + IPWIRELESS_PCCARD_NAME); + + return 0; + +exit3: +exit2: + if (ipw->common_memory) { + release_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); + iounmap(ipw->common_memory); + } +exit1: + release_resource(io_resource); + pcmcia_disable_device(p_dev); + return -1; +} + +static int config_ipwireless(struct ipw_dev *ipw) +{ + struct pcmcia_device *link = ipw->link; + int ret = 0; + + ipw->is_v2_card = 0; + link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM | + CONF_ENABLE_IRQ; + + ret = pcmcia_loop_config(link, ipwireless_probe, ipw); + if (ret != 0) + return ret; + + INIT_WORK(&ipw->work_reboot, signalled_reboot_work); + + ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, + ipw->attr_memory, ipw->common_memory, + ipw->is_v2_card, signalled_reboot_callback, + ipw); + + ret = pcmcia_request_irq(link, ipwireless_interrupt); + if (ret != 0) + goto exit; + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n", + ipw->is_v2_card ? "V2/V3" : "V1"); + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": I/O ports %pR, irq %d\n", link->resource[0], + (unsigned int) link->irq); + if (ipw->attr_memory && ipw->common_memory) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": attr memory %pR, common memory %pR\n", + link->resource[3], + link->resource[2]); + + ipw->network = ipwireless_network_create(ipw->hardware); + if (!ipw->network) + goto exit; + + ipw->tty = ipwireless_tty_create(ipw->hardware, ipw->network); + if (!ipw->tty) + goto exit; + + ipwireless_init_hardware_v2_v3(ipw->hardware); + + /* + * Do the RequestConfiguration last, because it enables interrupts. + * Then we don't get any interrupts before we're ready for them. + */ + ret = pcmcia_enable_device(link); + if (ret != 0) + goto exit; + + return 0; + +exit: + if (ipw->common_memory) { + release_mem_region(link->resource[2]->start, + resource_size(link->resource[2])); + iounmap(ipw->common_memory); + } + if (ipw->attr_memory) { + release_mem_region(link->resource[3]->start, + resource_size(link->resource[3])); + iounmap(ipw->attr_memory); + } + pcmcia_disable_device(link); + return -1; +} + +static void release_ipwireless(struct ipw_dev *ipw) +{ + if (ipw->common_memory) { + release_mem_region(ipw->link->resource[2]->start, + resource_size(ipw->link->resource[2])); + iounmap(ipw->common_memory); + } + if (ipw->attr_memory) { + release_mem_region(ipw->link->resource[3]->start, + resource_size(ipw->link->resource[3])); + iounmap(ipw->attr_memory); + } + pcmcia_disable_device(ipw->link); +} + +/* + * ipwireless_attach() creates an "instance" of the driver, allocating + * local data structures for one device (one interface). The device + * is registered with Card Services. + * + * The pcmcia_device structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a + * card insertion event. + */ +static int ipwireless_attach(struct pcmcia_device *link) +{ + struct ipw_dev *ipw; + int ret; + + ipw = kzalloc(sizeof(struct ipw_dev), GFP_KERNEL); + if (!ipw) + return -ENOMEM; + + ipw->link = link; + link->priv = ipw; + + ipw->hardware = ipwireless_hardware_create(); + if (!ipw->hardware) { + kfree(ipw); + return -ENOMEM; + } + /* RegisterClient will call config_ipwireless */ + + ret = config_ipwireless(ipw); + + if (ret != 0) { + ipwireless_detach(link); + return ret; + } + + return 0; +} + +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void ipwireless_detach(struct pcmcia_device *link) +{ + struct ipw_dev *ipw = link->priv; + + release_ipwireless(ipw); + + if (ipw->tty != NULL) + ipwireless_tty_free(ipw->tty); + if (ipw->network != NULL) + ipwireless_network_free(ipw->network); + if (ipw->hardware != NULL) + ipwireless_hardware_free(ipw->hardware); + kfree(ipw); +} + +static struct pcmcia_driver me = { + .owner = THIS_MODULE, + .probe = ipwireless_attach, + .remove = ipwireless_detach, + .name = IPWIRELESS_PCCARD_NAME, + .id_table = ipw_ids +}; + +/* + * Module insertion : initialisation of the module. + * Register the card with cardmgr... + */ +static int __init init_ipwireless(void) +{ + int ret; + + ret = ipwireless_tty_init(); + if (ret != 0) + return ret; + + ret = pcmcia_register_driver(&me); + if (ret != 0) + ipwireless_tty_release(); + + return ret; +} + +/* + * Module removal + */ +static void __exit exit_ipwireless(void) +{ + pcmcia_unregister_driver(&me); + ipwireless_tty_release(); +} + +module_init(init_ipwireless); +module_exit(exit_ipwireless); + +MODULE_AUTHOR(IPWIRELESS_PCMCIA_AUTHOR); +MODULE_DESCRIPTION(IPWIRELESS_PCCARD_NAME " " IPWIRELESS_PCMCIA_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/ipwireless/main.h b/drivers/tty/ipwireless/main.h new file mode 100644 index 000000000000..f2cbb116bccb --- /dev/null +++ b/drivers/tty/ipwireless/main.h @@ -0,0 +1,68 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_H_ +#define _IPWIRELESS_CS_H_ + +#include +#include + +#include +#include + +#include "hardware.h" + +#define IPWIRELESS_PCCARD_NAME "ipwireless" +#define IPWIRELESS_PCMCIA_VERSION "1.1" +#define IPWIRELESS_PCMCIA_AUTHOR \ + "Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba" + +#define IPWIRELESS_TX_QUEUE_SIZE 262144 +#define IPWIRELESS_RX_QUEUE_SIZE 262144 + +#define IPWIRELESS_STATE_DEBUG + +struct ipw_hardware; +struct ipw_network; +struct ipw_tty; + +struct ipw_dev { + struct pcmcia_device *link; + int is_v2_card; + + void __iomem *attr_memory; + + void __iomem *common_memory; + + /* Reference to attribute memory, containing CIS data */ + void *attribute_memory; + + /* Hardware context */ + struct ipw_hardware *hardware; + /* Network layer context */ + struct ipw_network *network; + /* TTY device context */ + struct ipw_tty *tty; + struct work_struct work_reboot; +}; + +/* Module parametres */ +extern int ipwireless_debug; +extern int ipwireless_loopback; +extern int ipwireless_out_queue; + +#endif diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c new file mode 100644 index 000000000000..f7daeea598e4 --- /dev/null +++ b/drivers/tty/ipwireless/network.c @@ -0,0 +1,508 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "network.h" +#include "hardware.h" +#include "main.h" +#include "tty.h" + +#define MAX_ASSOCIATED_TTYS 2 + +#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP) + +struct ipw_network { + /* Hardware context, used for calls to hardware layer. */ + struct ipw_hardware *hardware; + /* Context for kernel 'generic_ppp' functionality */ + struct ppp_channel *ppp_channel; + /* tty context connected with IPW console */ + struct ipw_tty *associated_ttys[NO_OF_IPW_CHANNELS][MAX_ASSOCIATED_TTYS]; + /* True if ppp needs waking up once we're ready to xmit */ + int ppp_blocked; + /* Number of packets queued up in hardware module. */ + int outgoing_packets_queued; + /* Spinlock to avoid interrupts during shutdown */ + spinlock_t lock; + struct mutex close_lock; + + /* PPP ioctl data, not actually used anywere */ + unsigned int flags; + unsigned int rbits; + u32 xaccm[8]; + u32 raccm; + int mru; + + int shutting_down; + unsigned int ras_control_lines; + + struct work_struct work_go_online; + struct work_struct work_go_offline; +}; + +static void notify_packet_sent(void *callback_data, unsigned int packet_length) +{ + struct ipw_network *network = callback_data; + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + network->outgoing_packets_queued--; + if (network->ppp_channel != NULL) { + if (network->ppp_blocked) { + network->ppp_blocked = 0; + spin_unlock_irqrestore(&network->lock, flags); + ppp_output_wakeup(network->ppp_channel); + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": ppp unblocked\n"); + } else + spin_unlock_irqrestore(&network->lock, flags); + } else + spin_unlock_irqrestore(&network->lock, flags); +} + +/* + * Called by the ppp system when it has a packet to send to the hardware. + */ +static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel, + struct sk_buff *skb) +{ + struct ipw_network *network = ppp_channel->private; + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + if (network->outgoing_packets_queued < ipwireless_out_queue) { + unsigned char *buf; + static unsigned char header[] = { + PPP_ALLSTATIONS, /* 0xff */ + PPP_UI, /* 0x03 */ + }; + int ret; + + network->outgoing_packets_queued++; + spin_unlock_irqrestore(&network->lock, flags); + + /* + * If we have the requested amount of headroom in the skb we + * were handed, then we can add the header efficiently. + */ + if (skb_headroom(skb) >= 2) { + memcpy(skb_push(skb, 2), header, 2); + ret = ipwireless_send_packet(network->hardware, + IPW_CHANNEL_RAS, skb->data, + skb->len, + notify_packet_sent, + network); + if (ret == -1) { + skb_pull(skb, 2); + return 0; + } + } else { + /* Otherwise (rarely) we do it inefficiently. */ + buf = kmalloc(skb->len + 2, GFP_ATOMIC); + if (!buf) + return 0; + memcpy(buf + 2, skb->data, skb->len); + memcpy(buf, header, 2); + ret = ipwireless_send_packet(network->hardware, + IPW_CHANNEL_RAS, buf, + skb->len + 2, + notify_packet_sent, + network); + kfree(buf); + if (ret == -1) + return 0; + } + kfree_skb(skb); + return 1; + } else { + /* + * Otherwise reject the packet, and flag that the ppp system + * needs to be unblocked once we are ready to send. + */ + network->ppp_blocked = 1; + spin_unlock_irqrestore(&network->lock, flags); + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": ppp blocked\n"); + return 0; + } +} + +/* Handle an ioctl call that has come in via ppp. (copy of ppp_async_ioctl() */ +static int ipwireless_ppp_ioctl(struct ppp_channel *ppp_channel, + unsigned int cmd, unsigned long arg) +{ + struct ipw_network *network = ppp_channel->private; + int err, val; + u32 accm[8]; + int __user *user_arg = (int __user *) arg; + + err = -EFAULT; + switch (cmd) { + case PPPIOCGFLAGS: + val = network->flags | network->rbits; + if (put_user(val, user_arg)) + break; + err = 0; + break; + + case PPPIOCSFLAGS: + if (get_user(val, user_arg)) + break; + network->flags = val & ~SC_RCV_BITS; + network->rbits = val & SC_RCV_BITS; + err = 0; + break; + + case PPPIOCGASYNCMAP: + if (put_user(network->xaccm[0], user_arg)) + break; + err = 0; + break; + + case PPPIOCSASYNCMAP: + if (get_user(network->xaccm[0], user_arg)) + break; + err = 0; + break; + + case PPPIOCGRASYNCMAP: + if (put_user(network->raccm, user_arg)) + break; + err = 0; + break; + + case PPPIOCSRASYNCMAP: + if (get_user(network->raccm, user_arg)) + break; + err = 0; + break; + + case PPPIOCGXASYNCMAP: + if (copy_to_user((void __user *) arg, network->xaccm, + sizeof(network->xaccm))) + break; + err = 0; + break; + + case PPPIOCSXASYNCMAP: + if (copy_from_user(accm, (void __user *) arg, sizeof(accm))) + break; + accm[2] &= ~0x40000000U; /* can't escape 0x5e */ + accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */ + memcpy(network->xaccm, accm, sizeof(network->xaccm)); + err = 0; + break; + + case PPPIOCGMRU: + if (put_user(network->mru, user_arg)) + break; + err = 0; + break; + + case PPPIOCSMRU: + if (get_user(val, user_arg)) + break; + if (val < PPP_MRU) + val = PPP_MRU; + network->mru = val; + err = 0; + break; + + default: + err = -ENOTTY; + } + + return err; +} + +static const struct ppp_channel_ops ipwireless_ppp_channel_ops = { + .start_xmit = ipwireless_ppp_start_xmit, + .ioctl = ipwireless_ppp_ioctl +}; + +static void do_go_online(struct work_struct *work_go_online) +{ + struct ipw_network *network = + container_of(work_go_online, struct ipw_network, + work_go_online); + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + if (!network->ppp_channel) { + struct ppp_channel *channel; + + spin_unlock_irqrestore(&network->lock, flags); + channel = kzalloc(sizeof(struct ppp_channel), GFP_KERNEL); + if (!channel) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": unable to allocate PPP channel\n"); + return; + } + channel->private = network; + channel->mtu = 16384; /* Wild guess */ + channel->hdrlen = 2; + channel->ops = &ipwireless_ppp_channel_ops; + + network->flags = 0; + network->rbits = 0; + network->mru = PPP_MRU; + memset(network->xaccm, 0, sizeof(network->xaccm)); + network->xaccm[0] = ~0U; + network->xaccm[3] = 0x60000000U; + network->raccm = ~0U; + ppp_register_channel(channel); + spin_lock_irqsave(&network->lock, flags); + network->ppp_channel = channel; + } + spin_unlock_irqrestore(&network->lock, flags); +} + +static void do_go_offline(struct work_struct *work_go_offline) +{ + struct ipw_network *network = + container_of(work_go_offline, struct ipw_network, + work_go_offline); + unsigned long flags; + + mutex_lock(&network->close_lock); + spin_lock_irqsave(&network->lock, flags); + if (network->ppp_channel != NULL) { + struct ppp_channel *channel = network->ppp_channel; + + network->ppp_channel = NULL; + spin_unlock_irqrestore(&network->lock, flags); + mutex_unlock(&network->close_lock); + ppp_unregister_channel(channel); + } else { + spin_unlock_irqrestore(&network->lock, flags); + mutex_unlock(&network->close_lock); + } +} + +void ipwireless_network_notify_control_line_change(struct ipw_network *network, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask) +{ + int i; + + if (channel_idx == IPW_CHANNEL_RAS) + network->ras_control_lines = control_lines; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { + struct ipw_tty *tty = + network->associated_ttys[channel_idx][i]; + + /* + * If it's associated with a tty (other than the RAS channel + * when we're online), then send the data to that tty. The RAS + * channel's data is handled above - it always goes through + * ppp_generic. + */ + if (tty) + ipwireless_tty_notify_control_line_change(tty, + channel_idx, + control_lines, + changed_mask); + } +} + +/* + * Some versions of firmware stuff packets with 0xff 0x03 (PPP: ALLSTATIONS, UI) + * bytes, which are required on sent packet, but not always present on received + * packets + */ +static struct sk_buff *ipw_packet_received_skb(unsigned char *data, + unsigned int length) +{ + struct sk_buff *skb; + + if (length > 2 && data[0] == PPP_ALLSTATIONS && data[1] == PPP_UI) { + length -= 2; + data += 2; + } + + skb = dev_alloc_skb(length + 4); + skb_reserve(skb, 2); + memcpy(skb_put(skb, length), data, length); + + return skb; +} + +void ipwireless_network_packet_received(struct ipw_network *network, + unsigned int channel_idx, + unsigned char *data, + unsigned int length) +{ + int i; + unsigned long flags; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { + struct ipw_tty *tty = network->associated_ttys[channel_idx][i]; + + if (!tty) + continue; + + /* + * If it's associated with a tty (other than the RAS channel + * when we're online), then send the data to that tty. The RAS + * channel's data is handled above - it always goes through + * ppp_generic. + */ + if (channel_idx == IPW_CHANNEL_RAS + && (network->ras_control_lines & + IPW_CONTROL_LINE_DCD) != 0 + && ipwireless_tty_is_modem(tty)) { + /* + * If data came in on the RAS channel and this tty is + * the modem tty, and we are online, then we send it to + * the PPP layer. + */ + mutex_lock(&network->close_lock); + spin_lock_irqsave(&network->lock, flags); + if (network->ppp_channel != NULL) { + struct sk_buff *skb; + + spin_unlock_irqrestore(&network->lock, + flags); + + /* Send the data to the ppp_generic module. */ + skb = ipw_packet_received_skb(data, length); + ppp_input(network->ppp_channel, skb); + } else + spin_unlock_irqrestore(&network->lock, + flags); + mutex_unlock(&network->close_lock); + } + /* Otherwise we send it out the tty. */ + else + ipwireless_tty_received(tty, data, length); + } +} + +struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw) +{ + struct ipw_network *network = + kzalloc(sizeof(struct ipw_network), GFP_ATOMIC); + + if (!network) + return NULL; + + spin_lock_init(&network->lock); + mutex_init(&network->close_lock); + + network->hardware = hw; + + INIT_WORK(&network->work_go_online, do_go_online); + INIT_WORK(&network->work_go_offline, do_go_offline); + + ipwireless_associate_network(hw, network); + + return network; +} + +void ipwireless_network_free(struct ipw_network *network) +{ + network->shutting_down = 1; + + ipwireless_ppp_close(network); + flush_work_sync(&network->work_go_online); + flush_work_sync(&network->work_go_offline); + + ipwireless_stop_interrupts(network->hardware); + ipwireless_associate_network(network->hardware, NULL); + + kfree(network); +} + +void ipwireless_associate_network_tty(struct ipw_network *network, + unsigned int channel_idx, + struct ipw_tty *tty) +{ + int i; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) + if (network->associated_ttys[channel_idx][i] == NULL) { + network->associated_ttys[channel_idx][i] = tty; + break; + } +} + +void ipwireless_disassociate_network_ttys(struct ipw_network *network, + unsigned int channel_idx) +{ + int i; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) + network->associated_ttys[channel_idx][i] = NULL; +} + +void ipwireless_ppp_open(struct ipw_network *network) +{ + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": online\n"); + schedule_work(&network->work_go_online); +} + +void ipwireless_ppp_close(struct ipw_network *network) +{ + /* Disconnect from the wireless network. */ + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": offline\n"); + schedule_work(&network->work_go_offline); +} + +int ipwireless_ppp_channel_index(struct ipw_network *network) +{ + int ret = -1; + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + if (network->ppp_channel != NULL) + ret = ppp_channel_index(network->ppp_channel); + spin_unlock_irqrestore(&network->lock, flags); + + return ret; +} + +int ipwireless_ppp_unit_number(struct ipw_network *network) +{ + int ret = -1; + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + if (network->ppp_channel != NULL) + ret = ppp_unit_number(network->ppp_channel); + spin_unlock_irqrestore(&network->lock, flags); + + return ret; +} + +int ipwireless_ppp_mru(const struct ipw_network *network) +{ + return network->mru; +} diff --git a/drivers/tty/ipwireless/network.h b/drivers/tty/ipwireless/network.h new file mode 100644 index 000000000000..561f765b3334 --- /dev/null +++ b/drivers/tty/ipwireless/network.h @@ -0,0 +1,53 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_NETWORK_H_ +#define _IPWIRELESS_CS_NETWORK_H_ + +#include + +struct ipw_network; +struct ipw_tty; +struct ipw_hardware; + +/* Definitions of the different channels on the PCMCIA UE */ +#define IPW_CHANNEL_RAS 0 +#define IPW_CHANNEL_DIALLER 1 +#define IPW_CHANNEL_CONSOLE 2 +#define NO_OF_IPW_CHANNELS 5 + +void ipwireless_network_notify_control_line_change(struct ipw_network *net, + unsigned int channel_idx, unsigned int control_lines, + unsigned int control_mask); +void ipwireless_network_packet_received(struct ipw_network *net, + unsigned int channel_idx, unsigned char *data, + unsigned int length); +struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw); +void ipwireless_network_free(struct ipw_network *net); +void ipwireless_associate_network_tty(struct ipw_network *net, + unsigned int channel_idx, struct ipw_tty *tty); +void ipwireless_disassociate_network_ttys(struct ipw_network *net, + unsigned int channel_idx); + +void ipwireless_ppp_open(struct ipw_network *net); + +void ipwireless_ppp_close(struct ipw_network *net); +int ipwireless_ppp_channel_index(struct ipw_network *net); +int ipwireless_ppp_unit_number(struct ipw_network *net); +int ipwireless_ppp_mru(const struct ipw_network *net); + +#endif diff --git a/drivers/tty/ipwireless/setup_protocol.h b/drivers/tty/ipwireless/setup_protocol.h new file mode 100644 index 000000000000..9d6bcc77c73c --- /dev/null +++ b/drivers/tty/ipwireless/setup_protocol.h @@ -0,0 +1,108 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_SETUP_PROTOCOL_H_ +#define _IPWIRELESS_CS_SETUP_PROTOCOL_H_ + +/* Version of the setup protocol and transport protocols */ +#define TL_SETUP_VERSION 1 + +#define TL_SETUP_VERSION_QRY_TMO 1000 +#define TL_SETUP_MAX_VERSION_QRY 30 + +/* Message numbers 0-9 are obsoleted and must not be reused! */ +#define TL_SETUP_SIGNO_GET_VERSION_QRY 10 +#define TL_SETUP_SIGNO_GET_VERSION_RSP 11 +#define TL_SETUP_SIGNO_CONFIG_MSG 12 +#define TL_SETUP_SIGNO_CONFIG_DONE_MSG 13 +#define TL_SETUP_SIGNO_OPEN_MSG 14 +#define TL_SETUP_SIGNO_CLOSE_MSG 15 + +#define TL_SETUP_SIGNO_INFO_MSG 20 +#define TL_SETUP_SIGNO_INFO_MSG_ACK 21 + +#define TL_SETUP_SIGNO_REBOOT_MSG 22 +#define TL_SETUP_SIGNO_REBOOT_MSG_ACK 23 + +/* Synchronous start-messages */ +struct tl_setup_get_version_qry { + unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_QRY */ +} __attribute__ ((__packed__)); + +struct tl_setup_get_version_rsp { + unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_RSP */ + unsigned char version; /* TL_SETUP_VERSION */ +} __attribute__ ((__packed__)); + +struct tl_setup_config_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_MSG */ + unsigned char port_no; + unsigned char prio_data; + unsigned char prio_ctrl; +} __attribute__ ((__packed__)); + +struct tl_setup_config_done_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_DONE_MSG */ +} __attribute__ ((__packed__)); + +/* Asyncronous messages */ +struct tl_setup_open_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_OPEN_MSG */ + unsigned char port_no; +} __attribute__ ((__packed__)); + +struct tl_setup_close_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CLOSE_MSG */ + unsigned char port_no; +} __attribute__ ((__packed__)); + +/* Driver type - for use in tl_setup_info_msg.driver_type */ +#define COMM_DRIVER 0 +#define NDISWAN_DRIVER 1 +#define NDISWAN_DRIVER_MAJOR_VERSION 2 +#define NDISWAN_DRIVER_MINOR_VERSION 0 + +/* + * It should not matter when this message comes over as we just store the + * results and send the ACK. + */ +struct tl_setup_info_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG */ + unsigned char driver_type; + unsigned char major_version; + unsigned char minor_version; +} __attribute__ ((__packed__)); + +struct tl_setup_info_msgAck { + unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG_ACK */ +} __attribute__ ((__packed__)); + +struct TlSetupRebootMsgAck { + unsigned char sig_no; /* TL_SETUP_SIGNO_REBOOT_MSG_ACK */ +} __attribute__ ((__packed__)); + +/* Define a union of all the msgs that the driver can receive from the card.*/ +union ipw_setup_rx_msg { + unsigned char sig_no; + struct tl_setup_get_version_rsp version_rsp_msg; + struct tl_setup_open_msg open_msg; + struct tl_setup_close_msg close_msg; + struct tl_setup_info_msg InfoMsg; + struct tl_setup_info_msgAck info_msg_ack; +} __attribute__ ((__packed__)); + +#endif /* _IPWIRELESS_CS_SETUP_PROTOCOL_H_ */ diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c new file mode 100644 index 000000000000..ef92869502a7 --- /dev/null +++ b/drivers/tty/ipwireless/tty.c @@ -0,0 +1,679 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tty.h" +#include "network.h" +#include "hardware.h" +#include "main.h" + +#define IPWIRELESS_PCMCIA_START (0) +#define IPWIRELESS_PCMCIA_MINORS (24) +#define IPWIRELESS_PCMCIA_MINOR_RANGE (8) + +#define TTYTYPE_MODEM (0) +#define TTYTYPE_MONITOR (1) +#define TTYTYPE_RAS_RAW (2) + +struct ipw_tty { + int index; + struct ipw_hardware *hardware; + unsigned int channel_idx; + unsigned int secondary_channel_idx; + int tty_type; + struct ipw_network *network; + struct tty_struct *linux_tty; + int open_count; + unsigned int control_lines; + struct mutex ipw_tty_mutex; + int tx_bytes_queued; + int closing; +}; + +static struct ipw_tty *ttys[IPWIRELESS_PCMCIA_MINORS]; + +static struct tty_driver *ipw_tty_driver; + +static char *tty_type_name(int tty_type) +{ + static char *channel_names[] = { + "modem", + "monitor", + "RAS-raw" + }; + + return channel_names[tty_type]; +} + +static void report_registering(struct ipw_tty *tty) +{ + char *iftype = tty_type_name(tty->tty_type); + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": registering %s device ttyIPWp%d\n", iftype, tty->index); +} + +static void report_deregistering(struct ipw_tty *tty) +{ + char *iftype = tty_type_name(tty->tty_type); + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": deregistering %s device ttyIPWp%d\n", iftype, + tty->index); +} + +static struct ipw_tty *get_tty(int minor) +{ + if (minor < ipw_tty_driver->minor_start + || minor >= ipw_tty_driver->minor_start + + IPWIRELESS_PCMCIA_MINORS) + return NULL; + else { + int minor_offset = minor - ipw_tty_driver->minor_start; + + /* + * The 'ras_raw' channel is only available when 'loopback' mode + * is enabled. + * Number of minor starts with 16 (_RANGE * _RAS_RAW). + */ + if (!ipwireless_loopback && + minor_offset >= + IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW) + return NULL; + + return ttys[minor_offset]; + } +} + +static int ipw_open(struct tty_struct *linux_tty, struct file *filp) +{ + int minor = linux_tty->index; + struct ipw_tty *tty = get_tty(minor); + + if (!tty) + return -ENODEV; + + mutex_lock(&tty->ipw_tty_mutex); + + if (tty->closing) { + mutex_unlock(&tty->ipw_tty_mutex); + return -ENODEV; + } + if (tty->open_count == 0) + tty->tx_bytes_queued = 0; + + tty->open_count++; + + tty->linux_tty = linux_tty; + linux_tty->driver_data = tty; + linux_tty->low_latency = 1; + + if (tty->tty_type == TTYTYPE_MODEM) + ipwireless_ppp_open(tty->network); + + mutex_unlock(&tty->ipw_tty_mutex); + + return 0; +} + +static void do_ipw_close(struct ipw_tty *tty) +{ + tty->open_count--; + + if (tty->open_count == 0) { + struct tty_struct *linux_tty = tty->linux_tty; + + if (linux_tty != NULL) { + tty->linux_tty = NULL; + linux_tty->driver_data = NULL; + + if (tty->tty_type == TTYTYPE_MODEM) + ipwireless_ppp_close(tty->network); + } + } +} + +static void ipw_hangup(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return; + + mutex_lock(&tty->ipw_tty_mutex); + if (tty->open_count == 0) { + mutex_unlock(&tty->ipw_tty_mutex); + return; + } + + do_ipw_close(tty); + + mutex_unlock(&tty->ipw_tty_mutex); +} + +static void ipw_close(struct tty_struct *linux_tty, struct file *filp) +{ + ipw_hangup(linux_tty); +} + +/* Take data received from hardware, and send it out the tty */ +void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, + unsigned int length) +{ + struct tty_struct *linux_tty; + int work = 0; + + mutex_lock(&tty->ipw_tty_mutex); + linux_tty = tty->linux_tty; + if (linux_tty == NULL) { + mutex_unlock(&tty->ipw_tty_mutex); + return; + } + + if (!tty->open_count) { + mutex_unlock(&tty->ipw_tty_mutex); + return; + } + mutex_unlock(&tty->ipw_tty_mutex); + + work = tty_insert_flip_string(linux_tty, data, length); + + if (work != length) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": %d chars not inserted to flip buffer!\n", + length - work); + + /* + * This may sleep if ->low_latency is set + */ + if (work) + tty_flip_buffer_push(linux_tty); +} + +static void ipw_write_packet_sent_callback(void *callback_data, + unsigned int packet_length) +{ + struct ipw_tty *tty = callback_data; + + /* + * Packet has been sent, so we subtract the number of bytes from our + * tally of outstanding TX bytes. + */ + tty->tx_bytes_queued -= packet_length; +} + +static int ipw_write(struct tty_struct *linux_tty, + const unsigned char *buf, int count) +{ + struct ipw_tty *tty = linux_tty->driver_data; + int room, ret; + + if (!tty) + return -ENODEV; + + mutex_lock(&tty->ipw_tty_mutex); + if (!tty->open_count) { + mutex_unlock(&tty->ipw_tty_mutex); + return -EINVAL; + } + + room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; + if (room < 0) + room = 0; + /* Don't allow caller to write any more than we have room for */ + if (count > room) + count = room; + + if (count == 0) { + mutex_unlock(&tty->ipw_tty_mutex); + return 0; + } + + ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS, + buf, count, + ipw_write_packet_sent_callback, tty); + if (ret == -1) { + mutex_unlock(&tty->ipw_tty_mutex); + return 0; + } + + tty->tx_bytes_queued += count; + mutex_unlock(&tty->ipw_tty_mutex); + + return count; +} + +static int ipw_write_room(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + int room; + + /* FIXME: Exactly how is the tty object locked here .. */ + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; + if (room < 0) + room = 0; + + return room; +} + +static int ipwireless_get_serial_info(struct ipw_tty *tty, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return (-EFAULT); + + memset(&tmp, 0, sizeof(tmp)); + tmp.type = PORT_UNKNOWN; + tmp.line = tty->index; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = 0; + tmp.baud_base = 115200; + tmp.close_delay = 0; + tmp.closing_wait = 0; + tmp.custom_divisor = 0; + tmp.hub6 = 0; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + + return 0; +} + +static int ipw_chars_in_buffer(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return 0; + + if (!tty->open_count) + return 0; + + return tty->tx_bytes_queued; +} + +static int get_control_lines(struct ipw_tty *tty) +{ + unsigned int my = tty->control_lines; + unsigned int out = 0; + + if (my & IPW_CONTROL_LINE_RTS) + out |= TIOCM_RTS; + if (my & IPW_CONTROL_LINE_DTR) + out |= TIOCM_DTR; + if (my & IPW_CONTROL_LINE_CTS) + out |= TIOCM_CTS; + if (my & IPW_CONTROL_LINE_DSR) + out |= TIOCM_DSR; + if (my & IPW_CONTROL_LINE_DCD) + out |= TIOCM_CD; + + return out; +} + +static int set_control_lines(struct ipw_tty *tty, unsigned int set, + unsigned int clear) +{ + int ret; + + if (set & TIOCM_RTS) { + ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 1); + if (ret) + return ret; + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_RTS(tty->hardware, + tty->secondary_channel_idx, 1); + if (ret) + return ret; + } + } + if (set & TIOCM_DTR) { + ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 1); + if (ret) + return ret; + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_DTR(tty->hardware, + tty->secondary_channel_idx, 1); + if (ret) + return ret; + } + } + if (clear & TIOCM_RTS) { + ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 0); + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_RTS(tty->hardware, + tty->secondary_channel_idx, 0); + if (ret) + return ret; + } + } + if (clear & TIOCM_DTR) { + ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 0); + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_DTR(tty->hardware, + tty->secondary_channel_idx, 0); + if (ret) + return ret; + } + } + return 0; +} + +static int ipw_tiocmget(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + /* FIXME: Exactly how is the tty object locked here .. */ + + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + return get_control_lines(tty); +} + +static int +ipw_tiocmset(struct tty_struct *linux_tty, + unsigned int set, unsigned int clear) +{ + struct ipw_tty *tty = linux_tty->driver_data; + /* FIXME: Exactly how is the tty object locked here .. */ + + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + return set_control_lines(tty, set, clear); +} + +static int ipw_ioctl(struct tty_struct *linux_tty, + unsigned int cmd, unsigned long arg) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + /* FIXME: Exactly how is the tty object locked here .. */ + + switch (cmd) { + case TIOCGSERIAL: + return ipwireless_get_serial_info(tty, (void __user *) arg); + + case TIOCSSERIAL: + return 0; /* Keeps the PCMCIA scripts happy. */ + } + + if (tty->tty_type == TTYTYPE_MODEM) { + switch (cmd) { + case PPPIOCGCHAN: + { + int chan = ipwireless_ppp_channel_index( + tty->network); + + if (chan < 0) + return -ENODEV; + if (put_user(chan, (int __user *) arg)) + return -EFAULT; + } + return 0; + + case PPPIOCGUNIT: + { + int unit = ipwireless_ppp_unit_number( + tty->network); + + if (unit < 0) + return -ENODEV; + if (put_user(unit, (int __user *) arg)) + return -EFAULT; + } + return 0; + + case FIONREAD: + { + int val = 0; + + if (put_user(val, (int __user *) arg)) + return -EFAULT; + } + return 0; + case TCFLSH: + return tty_perform_flush(linux_tty, arg); + } + } + return -ENOIOCTLCMD; +} + +static int add_tty(int j, + struct ipw_hardware *hardware, + struct ipw_network *network, int channel_idx, + int secondary_channel_idx, int tty_type) +{ + ttys[j] = kzalloc(sizeof(struct ipw_tty), GFP_KERNEL); + if (!ttys[j]) + return -ENOMEM; + ttys[j]->index = j; + ttys[j]->hardware = hardware; + ttys[j]->channel_idx = channel_idx; + ttys[j]->secondary_channel_idx = secondary_channel_idx; + ttys[j]->network = network; + ttys[j]->tty_type = tty_type; + mutex_init(&ttys[j]->ipw_tty_mutex); + + tty_register_device(ipw_tty_driver, j, NULL); + ipwireless_associate_network_tty(network, channel_idx, ttys[j]); + + if (secondary_channel_idx != -1) + ipwireless_associate_network_tty(network, + secondary_channel_idx, + ttys[j]); + if (get_tty(j + ipw_tty_driver->minor_start) == ttys[j]) + report_registering(ttys[j]); + return 0; +} + +struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hardware, + struct ipw_network *network) +{ + int i, j; + + for (i = 0; i < IPWIRELESS_PCMCIA_MINOR_RANGE; i++) { + int allfree = 1; + + for (j = i; j < IPWIRELESS_PCMCIA_MINORS; + j += IPWIRELESS_PCMCIA_MINOR_RANGE) + if (ttys[j] != NULL) { + allfree = 0; + break; + } + + if (allfree) { + j = i; + + if (add_tty(j, hardware, network, + IPW_CHANNEL_DIALLER, IPW_CHANNEL_RAS, + TTYTYPE_MODEM)) + return NULL; + + j += IPWIRELESS_PCMCIA_MINOR_RANGE; + if (add_tty(j, hardware, network, + IPW_CHANNEL_DIALLER, -1, + TTYTYPE_MONITOR)) + return NULL; + + j += IPWIRELESS_PCMCIA_MINOR_RANGE; + if (add_tty(j, hardware, network, + IPW_CHANNEL_RAS, -1, + TTYTYPE_RAS_RAW)) + return NULL; + + return ttys[i]; + } + } + return NULL; +} + +/* + * Must be called before ipwireless_network_free(). + */ +void ipwireless_tty_free(struct ipw_tty *tty) +{ + int j; + struct ipw_network *network = ttys[tty->index]->network; + + for (j = tty->index; j < IPWIRELESS_PCMCIA_MINORS; + j += IPWIRELESS_PCMCIA_MINOR_RANGE) { + struct ipw_tty *ttyj = ttys[j]; + + if (ttyj) { + mutex_lock(&ttyj->ipw_tty_mutex); + if (get_tty(j + ipw_tty_driver->minor_start) == ttyj) + report_deregistering(ttyj); + ttyj->closing = 1; + if (ttyj->linux_tty != NULL) { + mutex_unlock(&ttyj->ipw_tty_mutex); + tty_hangup(ttyj->linux_tty); + /* Wait till the tty_hangup has completed */ + flush_work_sync(&ttyj->linux_tty->hangup_work); + /* FIXME: Exactly how is the tty object locked here + against a parallel ioctl etc */ + mutex_lock(&ttyj->ipw_tty_mutex); + } + while (ttyj->open_count) + do_ipw_close(ttyj); + ipwireless_disassociate_network_ttys(network, + ttyj->channel_idx); + tty_unregister_device(ipw_tty_driver, j); + ttys[j] = NULL; + mutex_unlock(&ttyj->ipw_tty_mutex); + kfree(ttyj); + } + } +} + +static const struct tty_operations tty_ops = { + .open = ipw_open, + .close = ipw_close, + .hangup = ipw_hangup, + .write = ipw_write, + .write_room = ipw_write_room, + .ioctl = ipw_ioctl, + .chars_in_buffer = ipw_chars_in_buffer, + .tiocmget = ipw_tiocmget, + .tiocmset = ipw_tiocmset, +}; + +int ipwireless_tty_init(void) +{ + int result; + + ipw_tty_driver = alloc_tty_driver(IPWIRELESS_PCMCIA_MINORS); + if (!ipw_tty_driver) + return -ENOMEM; + + ipw_tty_driver->owner = THIS_MODULE; + ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME; + ipw_tty_driver->name = "ttyIPWp"; + ipw_tty_driver->major = 0; + ipw_tty_driver->minor_start = IPWIRELESS_PCMCIA_START; + ipw_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ipw_tty_driver->subtype = SERIAL_TYPE_NORMAL; + ipw_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + ipw_tty_driver->init_termios = tty_std_termios; + ipw_tty_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + ipw_tty_driver->init_termios.c_ispeed = 9600; + ipw_tty_driver->init_termios.c_ospeed = 9600; + tty_set_operations(ipw_tty_driver, &tty_ops); + result = tty_register_driver(ipw_tty_driver); + if (result) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": failed to register tty driver\n"); + put_tty_driver(ipw_tty_driver); + return result; + } + + return 0; +} + +void ipwireless_tty_release(void) +{ + int ret; + + ret = tty_unregister_driver(ipw_tty_driver); + put_tty_driver(ipw_tty_driver); + if (ret != 0) + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": tty_unregister_driver failed with code %d\n", ret); +} + +int ipwireless_tty_is_modem(struct ipw_tty *tty) +{ + return tty->tty_type == TTYTYPE_MODEM; +} + +void +ipwireless_tty_notify_control_line_change(struct ipw_tty *tty, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask) +{ + unsigned int old_control_lines = tty->control_lines; + + tty->control_lines = (tty->control_lines & ~changed_mask) + | (control_lines & changed_mask); + + /* + * If DCD is de-asserted, we close the tty so pppd can tell that we + * have gone offline. + */ + if ((old_control_lines & IPW_CONTROL_LINE_DCD) + && !(tty->control_lines & IPW_CONTROL_LINE_DCD) + && tty->linux_tty) { + tty_hangup(tty->linux_tty); + } +} + diff --git a/drivers/tty/ipwireless/tty.h b/drivers/tty/ipwireless/tty.h new file mode 100644 index 000000000000..747b2d637860 --- /dev/null +++ b/drivers/tty/ipwireless/tty.h @@ -0,0 +1,45 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_TTY_H_ +#define _IPWIRELESS_CS_TTY_H_ + +#include +#include + +#include +#include + +struct ipw_tty; +struct ipw_network; +struct ipw_hardware; + +int ipwireless_tty_init(void); +void ipwireless_tty_release(void); + +struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hw, + struct ipw_network *net); +void ipwireless_tty_free(struct ipw_tty *tty); +void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, + unsigned int length); +int ipwireless_tty_is_modem(struct ipw_tty *tty); +void ipwireless_tty_notify_control_line_change(struct ipw_tty *tty, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask); + +#endif -- cgit v1.2.2 From 4a6514e6d096716fb7bedf238efaaca877e2a7e8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 22 Feb 2011 16:57:21 -0800 Subject: tty: move obsolete and broken tty drivers to drivers/staging/tty/ As planned by Arnd Bergmann, this moves the following drivers to the drivers/staging/tty/ directory where they will be removed after 2.6.41 if no one steps up to claim them. epca epca ip2 istallion riscom8 serial167 specialix stallion Cc: Arnd Bergmann Cc: Alan Cox Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- arch/m68k/Kconfig | 8 - drivers/char/Kconfig | 79 - drivers/char/Makefile | 7 - drivers/char/epca.c | 2784 --------------------- drivers/char/epca.h | 158 -- drivers/char/epcaconfig.h | 7 - drivers/char/ip2/Makefile | 8 - drivers/char/ip2/i2cmd.c | 210 -- drivers/char/ip2/i2cmd.h | 630 ----- drivers/char/ip2/i2ellis.c | 1403 ----------- drivers/char/ip2/i2ellis.h | 566 ----- drivers/char/ip2/i2hw.h | 652 ----- drivers/char/ip2/i2lib.c | 2214 ----------------- drivers/char/ip2/i2lib.h | 351 --- drivers/char/ip2/i2pack.h | 364 --- drivers/char/ip2/ip2.h | 107 - drivers/char/ip2/ip2ioctl.h | 35 - drivers/char/ip2/ip2main.c | 3234 ------------------------ drivers/char/ip2/ip2trace.h | 42 - drivers/char/ip2/ip2types.h | 57 - drivers/char/istallion.c | 4507 --------------------------------- drivers/char/riscom8.c | 1560 ------------ drivers/char/riscom8.h | 91 - drivers/char/riscom8_reg.h | 254 -- drivers/char/serial167.c | 2489 ------------------- drivers/char/specialix.c | 2368 ------------------ drivers/char/specialix_io8.h | 140 -- drivers/char/stallion.c | 4651 ----------------------------------- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/tty/Kconfig | 87 + drivers/staging/tty/Makefile | 7 + drivers/staging/tty/TODO | 6 + drivers/staging/tty/epca.c | 2784 +++++++++++++++++++++ drivers/staging/tty/epca.h | 158 ++ drivers/staging/tty/epcaconfig.h | 7 + drivers/staging/tty/ip2/Makefile | 8 + drivers/staging/tty/ip2/i2cmd.c | 210 ++ drivers/staging/tty/ip2/i2cmd.h | 630 +++++ drivers/staging/tty/ip2/i2ellis.c | 1403 +++++++++++ drivers/staging/tty/ip2/i2ellis.h | 566 +++++ drivers/staging/tty/ip2/i2hw.h | 652 +++++ drivers/staging/tty/ip2/i2lib.c | 2214 +++++++++++++++++ drivers/staging/tty/ip2/i2lib.h | 351 +++ drivers/staging/tty/ip2/i2pack.h | 364 +++ drivers/staging/tty/ip2/ip2.h | 107 + drivers/staging/tty/ip2/ip2ioctl.h | 35 + drivers/staging/tty/ip2/ip2main.c | 3234 ++++++++++++++++++++++++ drivers/staging/tty/ip2/ip2trace.h | 42 + drivers/staging/tty/ip2/ip2types.h | 57 + drivers/staging/tty/istallion.c | 4507 +++++++++++++++++++++++++++++++++ drivers/staging/tty/riscom8.c | 1560 ++++++++++++ drivers/staging/tty/riscom8.h | 91 + drivers/staging/tty/riscom8_reg.h | 254 ++ drivers/staging/tty/serial167.c | 2489 +++++++++++++++++++ drivers/staging/tty/specialix.c | 2368 ++++++++++++++++++ drivers/staging/tty/specialix_io8.h | 140 ++ drivers/staging/tty/stallion.c | 4651 +++++++++++++++++++++++++++++++++++ 58 files changed, 28985 insertions(+), 28976 deletions(-) delete mode 100644 drivers/char/epca.c delete mode 100644 drivers/char/epca.h delete mode 100644 drivers/char/epcaconfig.h delete mode 100644 drivers/char/ip2/Makefile delete mode 100644 drivers/char/ip2/i2cmd.c delete mode 100644 drivers/char/ip2/i2cmd.h delete mode 100644 drivers/char/ip2/i2ellis.c delete mode 100644 drivers/char/ip2/i2ellis.h delete mode 100644 drivers/char/ip2/i2hw.h delete mode 100644 drivers/char/ip2/i2lib.c delete mode 100644 drivers/char/ip2/i2lib.h delete mode 100644 drivers/char/ip2/i2pack.h delete mode 100644 drivers/char/ip2/ip2.h delete mode 100644 drivers/char/ip2/ip2ioctl.h delete mode 100644 drivers/char/ip2/ip2main.c delete mode 100644 drivers/char/ip2/ip2trace.h delete mode 100644 drivers/char/ip2/ip2types.h delete mode 100644 drivers/char/istallion.c delete mode 100644 drivers/char/riscom8.c delete mode 100644 drivers/char/riscom8.h delete mode 100644 drivers/char/riscom8_reg.h delete mode 100644 drivers/char/serial167.c delete mode 100644 drivers/char/specialix.c delete mode 100644 drivers/char/specialix_io8.h delete mode 100644 drivers/char/stallion.c create mode 100644 drivers/staging/tty/Kconfig create mode 100644 drivers/staging/tty/Makefile create mode 100644 drivers/staging/tty/TODO create mode 100644 drivers/staging/tty/epca.c create mode 100644 drivers/staging/tty/epca.h create mode 100644 drivers/staging/tty/epcaconfig.h create mode 100644 drivers/staging/tty/ip2/Makefile create mode 100644 drivers/staging/tty/ip2/i2cmd.c create mode 100644 drivers/staging/tty/ip2/i2cmd.h create mode 100644 drivers/staging/tty/ip2/i2ellis.c create mode 100644 drivers/staging/tty/ip2/i2ellis.h create mode 100644 drivers/staging/tty/ip2/i2hw.h create mode 100644 drivers/staging/tty/ip2/i2lib.c create mode 100644 drivers/staging/tty/ip2/i2lib.h create mode 100644 drivers/staging/tty/ip2/i2pack.h create mode 100644 drivers/staging/tty/ip2/ip2.h create mode 100644 drivers/staging/tty/ip2/ip2ioctl.h create mode 100644 drivers/staging/tty/ip2/ip2main.c create mode 100644 drivers/staging/tty/ip2/ip2trace.h create mode 100644 drivers/staging/tty/ip2/ip2types.h create mode 100644 drivers/staging/tty/istallion.c create mode 100644 drivers/staging/tty/riscom8.c create mode 100644 drivers/staging/tty/riscom8.h create mode 100644 drivers/staging/tty/riscom8_reg.h create mode 100644 drivers/staging/tty/serial167.c create mode 100644 drivers/staging/tty/specialix.c create mode 100644 drivers/staging/tty/specialix_io8.h create mode 100644 drivers/staging/tty/stallion.c diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index bc9271b85759..a85e251c411f 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -554,14 +554,6 @@ config MVME147_SCC This is the driver for the serial ports on the Motorola MVME147 boards. Everyone using one of these boards should say Y here. -config SERIAL167 - bool "CD2401 support for MVME166/7 serial ports" - depends on MVME16x - help - This is the driver for the serial ports on the Motorola MVME166, - 167, and 172 boards. Everyone using one of these boards should say - Y here. - config MVME162_SCC bool "SCC support for MVME162 serial ports" depends on MVME16x && BROKEN diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 1adfac6a7b0b..7b8cf0295f6c 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -15,63 +15,6 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". -config COMPUTONE - tristate "Computone IntelliPort Plus serial support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - ---help--- - This driver supports the entire family of Intelliport II/Plus - controllers with the exception of the MicroChannel controllers and - products previous to the Intelliport II. These are multiport cards, - which give you many serial ports. You would need something like this - to connect more than two modems to your Linux box, for instance in - order to become a dial-in server. If you have a card like that, say - Y here and read . - - To compile this driver as module, choose M here: the - module will be called ip2. - -config DIGIEPCA - tristate "Digiboard Intelligent Async Support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - ---help--- - This is a driver for Digi International's Xx, Xeve, and Xem series - of cards which provide multiple serial ports. You would need - something like this to connect more than two modems to your Linux - box, for instance in order to become a dial-in server. This driver - supports the original PC (ISA) boards as well as PCI, and EISA. If - you have a card like this, say Y here and read the file - . - - To compile this driver as a module, choose M here: the - module will be called epca. - -config RISCOM8 - tristate "SDL RISCom/8 card support" - depends on SERIAL_NONSTANDARD - help - This is a driver for the SDL Communications RISCom/8 multiport card, - which gives you many serial ports. You would need something like - this to connect more than two modems to your Linux box, for instance - in order to become a dial-in server. If you have a card like that, - say Y here and read the file . - - Also it's possible to say M here and compile this driver as kernel - loadable module; the module will be called riscom8. - -config SPECIALIX - tristate "Specialix IO8+ card support" - depends on SERIAL_NONSTANDARD - help - This is a driver for the Specialix IO8+ multiport card (both the - ISA and the PCI version) which gives you many serial ports. You - would need something like this to connect more than two modems to - your Linux box, for instance in order to become a dial-in server. - - If you have a card like that, say Y here and read the file - . Also it's possible to say - M here and compile this driver as kernel loadable module which will be - called specialix. - config SX tristate "Specialix SX (and SI) card support" depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN @@ -112,28 +55,6 @@ config STALDRV in this case. If you have never heard about all this, it's safe to say N. -config STALLION - tristate "Stallion EasyIO or EC8/32 support" - depends on STALDRV && (ISA || EISA || PCI) - help - If you have an EasyIO or EasyConnection 8/32 multiport Stallion - card, then this is for you; say Y. Make sure to read - . - - To compile this driver as a module, choose M here: the - module will be called stallion. - -config ISTALLION - tristate "Stallion EC8/64, ONboard, Brumby support" - depends on STALDRV && (ISA || EISA || PCI) - help - If you have an EasyConnection 8/64, ONboard, Brumby or Stallion - serial multiport card, say Y here. Make sure to read - . - - To compile this driver as a module, choose M here: the - module will be called istallion. - config A2232 tristate "Commodore A2232 serial support (EXPERIMENTAL)" depends on EXPERIMENTAL && ZORRO && BROKEN diff --git a/drivers/char/Makefile b/drivers/char/Makefile index f5dc7c9bce6b..48bb8acbea49 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -8,15 +8,8 @@ obj-y += misc.o obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_SERIAL167) += serial167.o -obj-$(CONFIG_STALLION) += stallion.o -obj-$(CONFIG_ISTALLION) += istallion.o -obj-$(CONFIG_DIGIEPCA) += epca.o -obj-$(CONFIG_SPECIALIX) += specialix.o obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -obj-$(CONFIG_COMPUTONE) += ip2/ -obj-$(CONFIG_RISCOM8) += riscom8.o obj-$(CONFIG_SX) += sx.o generic_serial.o obj-$(CONFIG_RIO) += rio/ generic_serial.o obj-$(CONFIG_RAW_DRIVER) += raw.o diff --git a/drivers/char/epca.c b/drivers/char/epca.c deleted file mode 100644 index 7ad3638967ae..000000000000 --- a/drivers/char/epca.c +++ /dev/null @@ -1,2784 +0,0 @@ -/* - Copyright (C) 1996 Digi International. - - For technical support please email digiLinux@dgii.com or - call Digi tech support at (612) 912-3456 - - ** This driver is no longer supported by Digi ** - - Much of this design and code came from epca.c which was - copyright (C) 1994, 1995 Troy De Jongh, and subsquently - modified by David Nugent, Christoph Lameter, Mike McLagan. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* See README.epca for change history --DAT*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "digiPCI.h" - - -#include "digi1.h" -#include "digiFep1.h" -#include "epca.h" -#include "epcaconfig.h" - -#define VERSION "1.3.0.1-LK2.6" - -/* This major needs to be submitted to Linux to join the majors list */ -#define DIGIINFOMAJOR 35 /* For Digi specific ioctl */ - - -#define MAXCARDS 7 -#define epcaassert(x, msg) if (!(x)) epca_error(__LINE__, msg) - -#define PFX "epca: " - -static int nbdevs, num_cards, liloconfig; -static int digi_poller_inhibited = 1 ; - -static int setup_error_code; -static int invalid_lilo_config; - -/* - * The ISA boards do window flipping into the same spaces so its only sane with - * a single lock. It's still pretty efficient. This lock guards the hardware - * and the tty_port lock guards the kernel side stuff like use counts. Take - * this lock inside the port lock if you must take both. - */ -static DEFINE_SPINLOCK(epca_lock); - -/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted - to 7 below. */ -static struct board_info boards[MAXBOARDS]; - -static struct tty_driver *pc_driver; -static struct tty_driver *pc_info; - -/* ------------------ Begin Digi specific structures -------------------- */ - -/* - * digi_channels represents an array of structures that keep track of each - * channel of the Digi product. Information such as transmit and receive - * pointers, termio data, and signal definitions (DTR, CTS, etc ...) are stored - * here. This structure is NOT used to overlay the cards physical channel - * structure. - */ -static struct channel digi_channels[MAX_ALLOC]; - -/* - * card_ptr is an array used to hold the address of the first channel structure - * of each card. This array will hold the addresses of various channels located - * in digi_channels. - */ -static struct channel *card_ptr[MAXCARDS]; - -static struct timer_list epca_timer; - -/* - * Begin generic memory functions. These functions will be alias (point at) - * more specific functions dependent on the board being configured. - */ -static void memwinon(struct board_info *b, unsigned int win); -static void memwinoff(struct board_info *b, unsigned int win); -static void globalwinon(struct channel *ch); -static void rxwinon(struct channel *ch); -static void txwinon(struct channel *ch); -static void memoff(struct channel *ch); -static void assertgwinon(struct channel *ch); -static void assertmemoff(struct channel *ch); - -/* ---- Begin more 'specific' memory functions for cx_like products --- */ - -static void pcxem_memwinon(struct board_info *b, unsigned int win); -static void pcxem_memwinoff(struct board_info *b, unsigned int win); -static void pcxem_globalwinon(struct channel *ch); -static void pcxem_rxwinon(struct channel *ch); -static void pcxem_txwinon(struct channel *ch); -static void pcxem_memoff(struct channel *ch); - -/* ------ Begin more 'specific' memory functions for the pcxe ------- */ - -static void pcxe_memwinon(struct board_info *b, unsigned int win); -static void pcxe_memwinoff(struct board_info *b, unsigned int win); -static void pcxe_globalwinon(struct channel *ch); -static void pcxe_rxwinon(struct channel *ch); -static void pcxe_txwinon(struct channel *ch); -static void pcxe_memoff(struct channel *ch); - -/* ---- Begin more 'specific' memory functions for the pc64xe and pcxi ---- */ -/* Note : pc64xe and pcxi share the same windowing routines */ - -static void pcxi_memwinon(struct board_info *b, unsigned int win); -static void pcxi_memwinoff(struct board_info *b, unsigned int win); -static void pcxi_globalwinon(struct channel *ch); -static void pcxi_rxwinon(struct channel *ch); -static void pcxi_txwinon(struct channel *ch); -static void pcxi_memoff(struct channel *ch); - -/* - Begin 'specific' do nothing memory functions needed for some cards - */ - -static void dummy_memwinon(struct board_info *b, unsigned int win); -static void dummy_memwinoff(struct board_info *b, unsigned int win); -static void dummy_globalwinon(struct channel *ch); -static void dummy_rxwinon(struct channel *ch); -static void dummy_txwinon(struct channel *ch); -static void dummy_memoff(struct channel *ch); -static void dummy_assertgwinon(struct channel *ch); -static void dummy_assertmemoff(struct channel *ch); - -static struct channel *verifyChannel(struct tty_struct *); -static void pc_sched_event(struct channel *, int); -static void epca_error(int, char *); -static void pc_close(struct tty_struct *, struct file *); -static void shutdown(struct channel *, struct tty_struct *tty); -static void pc_hangup(struct tty_struct *); -static int pc_write_room(struct tty_struct *); -static int pc_chars_in_buffer(struct tty_struct *); -static void pc_flush_buffer(struct tty_struct *); -static void pc_flush_chars(struct tty_struct *); -static int pc_open(struct tty_struct *, struct file *); -static void post_fep_init(unsigned int crd); -static void epcapoll(unsigned long); -static void doevent(int); -static void fepcmd(struct channel *, int, int, int, int, int); -static unsigned termios2digi_h(struct channel *ch, unsigned); -static unsigned termios2digi_i(struct channel *ch, unsigned); -static unsigned termios2digi_c(struct channel *ch, unsigned); -static void epcaparam(struct tty_struct *, struct channel *); -static void receive_data(struct channel *, struct tty_struct *tty); -static int pc_ioctl(struct tty_struct *, - unsigned int, unsigned long); -static int info_ioctl(struct tty_struct *, - unsigned int, unsigned long); -static void pc_set_termios(struct tty_struct *, struct ktermios *); -static void do_softint(struct work_struct *work); -static void pc_stop(struct tty_struct *); -static void pc_start(struct tty_struct *); -static void pc_throttle(struct tty_struct *tty); -static void pc_unthrottle(struct tty_struct *tty); -static int pc_send_break(struct tty_struct *tty, int msec); -static void setup_empty_event(struct tty_struct *tty, struct channel *ch); - -static int pc_write(struct tty_struct *, const unsigned char *, int); -static int pc_init(void); -static int init_PCI(void); - -/* - * Table of functions for each board to handle memory. Mantaining parallelism - * is a *very* good idea here. The idea is for the runtime code to blindly call - * these functions, not knowing/caring about the underlying hardware. This - * stuff should contain no conditionals; if more functionality is needed a - * different entry should be established. These calls are the interface calls - * and are the only functions that should be accessed. Anyone caught making - * direct calls deserves what they get. - */ -static void memwinon(struct board_info *b, unsigned int win) -{ - b->memwinon(b, win); -} - -static void memwinoff(struct board_info *b, unsigned int win) -{ - b->memwinoff(b, win); -} - -static void globalwinon(struct channel *ch) -{ - ch->board->globalwinon(ch); -} - -static void rxwinon(struct channel *ch) -{ - ch->board->rxwinon(ch); -} - -static void txwinon(struct channel *ch) -{ - ch->board->txwinon(ch); -} - -static void memoff(struct channel *ch) -{ - ch->board->memoff(ch); -} -static void assertgwinon(struct channel *ch) -{ - ch->board->assertgwinon(ch); -} - -static void assertmemoff(struct channel *ch) -{ - ch->board->assertmemoff(ch); -} - -/* PCXEM windowing is the same as that used in the PCXR and CX series cards. */ -static void pcxem_memwinon(struct board_info *b, unsigned int win) -{ - outb_p(FEPWIN | win, b->port + 1); -} - -static void pcxem_memwinoff(struct board_info *b, unsigned int win) -{ - outb_p(0, b->port + 1); -} - -static void pcxem_globalwinon(struct channel *ch) -{ - outb_p(FEPWIN, (int)ch->board->port + 1); -} - -static void pcxem_rxwinon(struct channel *ch) -{ - outb_p(ch->rxwin, (int)ch->board->port + 1); -} - -static void pcxem_txwinon(struct channel *ch) -{ - outb_p(ch->txwin, (int)ch->board->port + 1); -} - -static void pcxem_memoff(struct channel *ch) -{ - outb_p(0, (int)ch->board->port + 1); -} - -/* ----------------- Begin pcxe memory window stuff ------------------ */ -static void pcxe_memwinon(struct board_info *b, unsigned int win) -{ - outb_p(FEPWIN | win, b->port + 1); -} - -static void pcxe_memwinoff(struct board_info *b, unsigned int win) -{ - outb_p(inb(b->port) & ~FEPMEM, b->port + 1); - outb_p(0, b->port + 1); -} - -static void pcxe_globalwinon(struct channel *ch) -{ - outb_p(FEPWIN, (int)ch->board->port + 1); -} - -static void pcxe_rxwinon(struct channel *ch) -{ - outb_p(ch->rxwin, (int)ch->board->port + 1); -} - -static void pcxe_txwinon(struct channel *ch) -{ - outb_p(ch->txwin, (int)ch->board->port + 1); -} - -static void pcxe_memoff(struct channel *ch) -{ - outb_p(0, (int)ch->board->port); - outb_p(0, (int)ch->board->port + 1); -} - -/* ------------- Begin pc64xe and pcxi memory window stuff -------------- */ -static void pcxi_memwinon(struct board_info *b, unsigned int win) -{ - outb_p(inb(b->port) | FEPMEM, b->port); -} - -static void pcxi_memwinoff(struct board_info *b, unsigned int win) -{ - outb_p(inb(b->port) & ~FEPMEM, b->port); -} - -static void pcxi_globalwinon(struct channel *ch) -{ - outb_p(FEPMEM, ch->board->port); -} - -static void pcxi_rxwinon(struct channel *ch) -{ - outb_p(FEPMEM, ch->board->port); -} - -static void pcxi_txwinon(struct channel *ch) -{ - outb_p(FEPMEM, ch->board->port); -} - -static void pcxi_memoff(struct channel *ch) -{ - outb_p(0, ch->board->port); -} - -static void pcxi_assertgwinon(struct channel *ch) -{ - epcaassert(inb(ch->board->port) & FEPMEM, "Global memory off"); -} - -static void pcxi_assertmemoff(struct channel *ch) -{ - epcaassert(!(inb(ch->board->port) & FEPMEM), "Memory on"); -} - -/* - * Not all of the cards need specific memory windowing routines. Some cards - * (Such as PCI) needs no windowing routines at all. We provide these do - * nothing routines so that the same code base can be used. The driver will - * ALWAYS call a windowing routine if it thinks it needs to; regardless of the - * card. However, dependent on the card the routine may or may not do anything. - */ -static void dummy_memwinon(struct board_info *b, unsigned int win) -{ -} - -static void dummy_memwinoff(struct board_info *b, unsigned int win) -{ -} - -static void dummy_globalwinon(struct channel *ch) -{ -} - -static void dummy_rxwinon(struct channel *ch) -{ -} - -static void dummy_txwinon(struct channel *ch) -{ -} - -static void dummy_memoff(struct channel *ch) -{ -} - -static void dummy_assertgwinon(struct channel *ch) -{ -} - -static void dummy_assertmemoff(struct channel *ch) -{ -} - -static struct channel *verifyChannel(struct tty_struct *tty) -{ - /* - * This routine basically provides a sanity check. It insures that the - * channel returned is within the proper range of addresses as well as - * properly initialized. If some bogus info gets passed in - * through tty->driver_data this should catch it. - */ - if (tty) { - struct channel *ch = tty->driver_data; - if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) { - if (ch->magic == EPCA_MAGIC) - return ch; - } - } - return NULL; -} - -static void pc_sched_event(struct channel *ch, int event) -{ - /* - * We call this to schedule interrupt processing on some event. The - * kernel sees our request and calls the related routine in OUR driver. - */ - ch->event |= 1 << event; - schedule_work(&ch->tqueue); -} - -static void epca_error(int line, char *msg) -{ - printk(KERN_ERR "epca_error (Digi): line = %d %s\n", line, msg); -} - -static void pc_close(struct tty_struct *tty, struct file *filp) -{ - struct channel *ch; - struct tty_port *port; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch == NULL) - return; - port = &ch->port; - - if (tty_port_close_start(port, tty, filp) == 0) - return; - - pc_flush_buffer(tty); - shutdown(ch, tty); - - tty_port_close_end(port, tty); - ch->event = 0; /* FIXME: review ch->event locking */ - tty_port_tty_set(port, NULL); -} - -static void shutdown(struct channel *ch, struct tty_struct *tty) -{ - unsigned long flags; - struct board_chan __iomem *bc; - struct tty_port *port = &ch->port; - - if (!(port->flags & ASYNC_INITIALIZED)) - return; - - spin_lock_irqsave(&epca_lock, flags); - - globalwinon(ch); - bc = ch->brdchan; - - /* - * In order for an event to be generated on the receipt of data the - * idata flag must be set. Since we are shutting down, this is not - * necessary clear this flag. - */ - if (bc) - writeb(0, &bc->idata); - - /* If we're a modem control device and HUPCL is on, drop RTS & DTR. */ - if (tty->termios->c_cflag & HUPCL) { - ch->omodem &= ~(ch->m_rts | ch->m_dtr); - fepcmd(ch, SETMODEM, 0, ch->m_dtr | ch->m_rts, 10, 1); - } - memoff(ch); - - /* - * The channel has officialy been closed. The next time it is opened it - * will have to reinitialized. Set a flag to indicate this. - */ - /* Prevent future Digi programmed interrupts from coming active */ - port->flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&epca_lock, flags); -} - -static void pc_hangup(struct tty_struct *tty) -{ - struct channel *ch; - - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch != NULL) { - pc_flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(ch, tty); - - ch->event = 0; /* FIXME: review locking of ch->event */ - tty_port_hangup(&ch->port); - } -} - -static int pc_write(struct tty_struct *tty, - const unsigned char *buf, int bytesAvailable) -{ - unsigned int head, tail; - int dataLen; - int size; - int amountCopied; - struct channel *ch; - unsigned long flags; - int remain; - struct board_chan __iomem *bc; - - /* - * pc_write is primarily called directly by the kernel routine - * tty_write (Though it can also be called by put_char) found in - * tty_io.c. pc_write is passed a line discipline buffer where the data - * to be written out is stored. The line discipline implementation - * itself is done at the kernel level and is not brought into the - * driver. - */ - - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch == NULL) - return 0; - - /* Make a pointer to the channel data structure found on the board. */ - bc = ch->brdchan; - size = ch->txbufsize; - amountCopied = 0; - - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - - head = readw(&bc->tin) & (size - 1); - tail = readw(&bc->tout); - - if (tail != readw(&bc->tout)) - tail = readw(&bc->tout); - tail &= (size - 1); - - if (head >= tail) { - /* head has not wrapped */ - /* - * remain (much like dataLen above) represents the total amount - * of space available on the card for data. Here dataLen - * represents the space existing between the head pointer and - * the end of buffer. This is important because a memcpy cannot - * be told to automatically wrap around when it hits the buffer - * end. - */ - dataLen = size - head; - remain = size - (head - tail) - 1; - } else { - /* head has wrapped around */ - remain = tail - head - 1; - dataLen = remain; - } - /* - * Check the space on the card. If we have more data than space; reduce - * the amount of data to fit the space. - */ - bytesAvailable = min(remain, bytesAvailable); - txwinon(ch); - while (bytesAvailable > 0) { - /* there is data to copy onto card */ - - /* - * If head is not wrapped, the below will make sure the first - * data copy fills to the end of card buffer. - */ - dataLen = min(bytesAvailable, dataLen); - memcpy_toio(ch->txptr + head, buf, dataLen); - buf += dataLen; - head += dataLen; - amountCopied += dataLen; - bytesAvailable -= dataLen; - - if (head >= size) { - head = 0; - dataLen = tail; - } - } - ch->statusflags |= TXBUSY; - globalwinon(ch); - writew(head, &bc->tin); - - if ((ch->statusflags & LOWWAIT) == 0) { - ch->statusflags |= LOWWAIT; - writeb(1, &bc->ilow); - } - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - return amountCopied; -} - -static int pc_write_room(struct tty_struct *tty) -{ - int remain = 0; - struct channel *ch; - unsigned long flags; - unsigned int head, tail; - struct board_chan __iomem *bc; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch != NULL) { - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - - bc = ch->brdchan; - head = readw(&bc->tin) & (ch->txbufsize - 1); - tail = readw(&bc->tout); - - if (tail != readw(&bc->tout)) - tail = readw(&bc->tout); - /* Wrap tail if necessary */ - tail &= (ch->txbufsize - 1); - remain = tail - head - 1; - if (remain < 0) - remain += ch->txbufsize; - - if (remain && (ch->statusflags & LOWWAIT) == 0) { - ch->statusflags |= LOWWAIT; - writeb(1, &bc->ilow); - } - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - } - /* Return how much room is left on card */ - return remain; -} - -static int pc_chars_in_buffer(struct tty_struct *tty) -{ - int chars; - unsigned int ctail, head, tail; - int remain; - unsigned long flags; - struct channel *ch; - struct board_chan __iomem *bc; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch == NULL) - return 0; - - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - - bc = ch->brdchan; - tail = readw(&bc->tout); - head = readw(&bc->tin); - ctail = readw(&ch->mailbox->cout); - - if (tail == head && readw(&ch->mailbox->cin) == ctail && - readb(&bc->tbusy) == 0) - chars = 0; - else { /* Begin if some space on the card has been used */ - head = readw(&bc->tin) & (ch->txbufsize - 1); - tail &= (ch->txbufsize - 1); - /* - * The logic here is basically opposite of the above - * pc_write_room here we are finding the amount of bytes in the - * buffer filled. Not the amount of bytes empty. - */ - remain = tail - head - 1; - if (remain < 0) - remain += ch->txbufsize; - chars = (int)(ch->txbufsize - remain); - /* - * Make it possible to wakeup anything waiting for output in - * tty_ioctl.c, etc. - * - * If not already set. Setup an event to indicate when the - * transmit buffer empties. - */ - if (!(ch->statusflags & EMPTYWAIT)) - setup_empty_event(tty, ch); - } /* End if some space on the card has been used */ - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - /* Return number of characters residing on card. */ - return chars; -} - -static void pc_flush_buffer(struct tty_struct *tty) -{ - unsigned int tail; - unsigned long flags; - struct channel *ch; - struct board_chan __iomem *bc; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch == NULL) - return; - - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - bc = ch->brdchan; - tail = readw(&bc->tout); - /* Have FEP move tout pointer; effectively flushing transmit buffer */ - fepcmd(ch, STOUT, (unsigned) tail, 0, 0, 0); - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - tty_wakeup(tty); -} - -static void pc_flush_chars(struct tty_struct *tty) -{ - struct channel *ch; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch != NULL) { - unsigned long flags; - spin_lock_irqsave(&epca_lock, flags); - /* - * If not already set and the transmitter is busy setup an - * event to indicate when the transmit empties. - */ - if ((ch->statusflags & TXBUSY) && - !(ch->statusflags & EMPTYWAIT)) - setup_empty_event(tty, ch); - spin_unlock_irqrestore(&epca_lock, flags); - } -} - -static int epca_carrier_raised(struct tty_port *port) -{ - struct channel *ch = container_of(port, struct channel, port); - if (ch->imodem & ch->dcd) - return 1; - return 0; -} - -static void epca_dtr_rts(struct tty_port *port, int onoff) -{ -} - -static int pc_open(struct tty_struct *tty, struct file *filp) -{ - struct channel *ch; - struct tty_port *port; - unsigned long flags; - int line, retval, boardnum; - struct board_chan __iomem *bc; - unsigned int head; - - line = tty->index; - if (line < 0 || line >= nbdevs) - return -ENODEV; - - ch = &digi_channels[line]; - port = &ch->port; - boardnum = ch->boardnum; - - /* Check status of board configured in system. */ - - /* - * I check to see if the epca_setup routine detected a user error. It - * might be better to put this in pc_init, but for the moment it goes - * here. - */ - if (invalid_lilo_config) { - if (setup_error_code & INVALID_BOARD_TYPE) - printk(KERN_ERR "epca: pc_open: Invalid board type specified in kernel options.\n"); - if (setup_error_code & INVALID_NUM_PORTS) - printk(KERN_ERR "epca: pc_open: Invalid number of ports specified in kernel options.\n"); - if (setup_error_code & INVALID_MEM_BASE) - printk(KERN_ERR "epca: pc_open: Invalid board memory address specified in kernel options.\n"); - if (setup_error_code & INVALID_PORT_BASE) - printk(KERN_ERR "epca; pc_open: Invalid board port address specified in kernel options.\n"); - if (setup_error_code & INVALID_BOARD_STATUS) - printk(KERN_ERR "epca: pc_open: Invalid board status specified in kernel options.\n"); - if (setup_error_code & INVALID_ALTPIN) - printk(KERN_ERR "epca: pc_open: Invalid board altpin specified in kernel options;\n"); - tty->driver_data = NULL; /* Mark this device as 'down' */ - return -ENODEV; - } - if (boardnum >= num_cards || boards[boardnum].status == DISABLED) { - tty->driver_data = NULL; /* Mark this device as 'down' */ - return(-ENODEV); - } - - bc = ch->brdchan; - if (bc == NULL) { - tty->driver_data = NULL; - return -ENODEV; - } - - spin_lock_irqsave(&port->lock, flags); - /* - * Every time a channel is opened, increment a counter. This is - * necessary because we do not wish to flush and shutdown the channel - * until the last app holding the channel open, closes it. - */ - port->count++; - /* - * Set a kernel structures pointer to our local channel structure. This - * way we can get to it when passed only a tty struct. - */ - tty->driver_data = ch; - port->tty = tty; - /* - * If this is the first time the channel has been opened, initialize - * the tty->termios struct otherwise let pc_close handle it. - */ - spin_lock(&epca_lock); - globalwinon(ch); - ch->statusflags = 0; - - /* Save boards current modem status */ - ch->imodem = readb(&bc->mstat); - - /* - * Set receive head and tail ptrs to each other. This indicates no data - * available to read. - */ - head = readw(&bc->rin); - writew(head, &bc->rout); - - /* Set the channels associated tty structure */ - - /* - * The below routine generally sets up parity, baud, flow control - * issues, etc.... It effect both control flags and input flags. - */ - epcaparam(tty, ch); - memoff(ch); - spin_unlock(&epca_lock); - port->flags |= ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->lock, flags); - - retval = tty_port_block_til_ready(port, tty, filp); - if (retval) - return retval; - /* - * Set this again in case a hangup set it to zero while this open() was - * waiting for the line... - */ - spin_lock_irqsave(&port->lock, flags); - port->tty = tty; - spin_lock(&epca_lock); - globalwinon(ch); - /* Enable Digi Data events */ - writeb(1, &bc->idata); - memoff(ch); - spin_unlock(&epca_lock); - spin_unlock_irqrestore(&port->lock, flags); - return 0; -} - -static int __init epca_module_init(void) -{ - return pc_init(); -} -module_init(epca_module_init); - -static struct pci_driver epca_driver; - -static void __exit epca_module_exit(void) -{ - int count, crd; - struct board_info *bd; - struct channel *ch; - - del_timer_sync(&epca_timer); - - if (tty_unregister_driver(pc_driver) || - tty_unregister_driver(pc_info)) { - printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n"); - return; - } - put_tty_driver(pc_driver); - put_tty_driver(pc_info); - - for (crd = 0; crd < num_cards; crd++) { - bd = &boards[crd]; - if (!bd) { /* sanity check */ - printk(KERN_ERR " - Digi : cleanup_module failed\n"); - return; - } - ch = card_ptr[crd]; - for (count = 0; count < bd->numports; count++, ch++) { - struct tty_struct *tty = tty_port_tty_get(&ch->port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } - } - } - pci_unregister_driver(&epca_driver); -} -module_exit(epca_module_exit); - -static const struct tty_operations pc_ops = { - .open = pc_open, - .close = pc_close, - .write = pc_write, - .write_room = pc_write_room, - .flush_buffer = pc_flush_buffer, - .chars_in_buffer = pc_chars_in_buffer, - .flush_chars = pc_flush_chars, - .ioctl = pc_ioctl, - .set_termios = pc_set_termios, - .stop = pc_stop, - .start = pc_start, - .throttle = pc_throttle, - .unthrottle = pc_unthrottle, - .hangup = pc_hangup, - .break_ctl = pc_send_break -}; - -static const struct tty_port_operations epca_port_ops = { - .carrier_raised = epca_carrier_raised, - .dtr_rts = epca_dtr_rts, -}; - -static int info_open(struct tty_struct *tty, struct file *filp) -{ - return 0; -} - -static const struct tty_operations info_ops = { - .open = info_open, - .ioctl = info_ioctl, -}; - -static int __init pc_init(void) -{ - int crd; - struct board_info *bd; - unsigned char board_id = 0; - int err = -ENOMEM; - - int pci_boards_found, pci_count; - - pci_count = 0; - - pc_driver = alloc_tty_driver(MAX_ALLOC); - if (!pc_driver) - goto out1; - - pc_info = alloc_tty_driver(MAX_ALLOC); - if (!pc_info) - goto out2; - - /* - * If epca_setup has not been ran by LILO set num_cards to defaults; - * copy board structure defined by digiConfig into drivers board - * structure. Note : If LILO has ran epca_setup then epca_setup will - * handle defining num_cards as well as copying the data into the board - * structure. - */ - if (!liloconfig) { - /* driver has been configured via. epcaconfig */ - nbdevs = NBDEVS; - num_cards = NUMCARDS; - memcpy(&boards, &static_boards, - sizeof(struct board_info) * NUMCARDS); - } - - /* - * Note : If lilo was used to configure the driver and the ignore - * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards - * will equal 0 at this point. This is okay; PCI cards will still be - * picked up if detected. - */ - - /* - * Set up interrupt, we will worry about memory allocation in - * post_fep_init. - */ - printk(KERN_INFO "DIGI epca driver version %s loaded.\n", VERSION); - - /* - * NOTE : This code assumes that the number of ports found in the - * boards array is correct. This could be wrong if the card in question - * is PCI (And therefore has no ports entry in the boards structure.) - * The rest of the information will be valid for PCI because the - * beginning of pc_init scans for PCI and determines i/o and base - * memory addresses. I am not sure if it is possible to read the number - * of ports supported by the card prior to it being booted (Since that - * is the state it is in when pc_init is run). Because it is not - * possible to query the number of supported ports until after the card - * has booted; we are required to calculate the card_ptrs as the card - * is initialized (Inside post_fep_init). The negative thing about this - * approach is that digiDload's call to GET_INFO will have a bad port - * value. (Since this is called prior to post_fep_init.) - */ - pci_boards_found = 0; - if (num_cards < MAXBOARDS) - pci_boards_found += init_PCI(); - num_cards += pci_boards_found; - - pc_driver->owner = THIS_MODULE; - pc_driver->name = "ttyD"; - pc_driver->major = DIGI_MAJOR; - pc_driver->minor_start = 0; - pc_driver->type = TTY_DRIVER_TYPE_SERIAL; - pc_driver->subtype = SERIAL_TYPE_NORMAL; - pc_driver->init_termios = tty_std_termios; - pc_driver->init_termios.c_iflag = 0; - pc_driver->init_termios.c_oflag = 0; - pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; - pc_driver->init_termios.c_lflag = 0; - pc_driver->init_termios.c_ispeed = 9600; - pc_driver->init_termios.c_ospeed = 9600; - pc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK; - tty_set_operations(pc_driver, &pc_ops); - - pc_info->owner = THIS_MODULE; - pc_info->name = "digi_ctl"; - pc_info->major = DIGIINFOMAJOR; - pc_info->minor_start = 0; - pc_info->type = TTY_DRIVER_TYPE_SERIAL; - pc_info->subtype = SERIAL_TYPE_INFO; - pc_info->init_termios = tty_std_termios; - pc_info->init_termios.c_iflag = 0; - pc_info->init_termios.c_oflag = 0; - pc_info->init_termios.c_lflag = 0; - pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL; - pc_info->init_termios.c_ispeed = 9600; - pc_info->init_termios.c_ospeed = 9600; - pc_info->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(pc_info, &info_ops); - - - for (crd = 0; crd < num_cards; crd++) { - /* - * This is where the appropriate memory handlers for the - * hardware is set. Everything at runtime blindly jumps through - * these vectors. - */ - - /* defined in epcaconfig.h */ - bd = &boards[crd]; - - switch (bd->type) { - case PCXEM: - case EISAXEM: - bd->memwinon = pcxem_memwinon; - bd->memwinoff = pcxem_memwinoff; - bd->globalwinon = pcxem_globalwinon; - bd->txwinon = pcxem_txwinon; - bd->rxwinon = pcxem_rxwinon; - bd->memoff = pcxem_memoff; - bd->assertgwinon = dummy_assertgwinon; - bd->assertmemoff = dummy_assertmemoff; - break; - - case PCIXEM: - case PCIXRJ: - case PCIXR: - bd->memwinon = dummy_memwinon; - bd->memwinoff = dummy_memwinoff; - bd->globalwinon = dummy_globalwinon; - bd->txwinon = dummy_txwinon; - bd->rxwinon = dummy_rxwinon; - bd->memoff = dummy_memoff; - bd->assertgwinon = dummy_assertgwinon; - bd->assertmemoff = dummy_assertmemoff; - break; - - case PCXE: - case PCXEVE: - bd->memwinon = pcxe_memwinon; - bd->memwinoff = pcxe_memwinoff; - bd->globalwinon = pcxe_globalwinon; - bd->txwinon = pcxe_txwinon; - bd->rxwinon = pcxe_rxwinon; - bd->memoff = pcxe_memoff; - bd->assertgwinon = dummy_assertgwinon; - bd->assertmemoff = dummy_assertmemoff; - break; - - case PCXI: - case PC64XE: - bd->memwinon = pcxi_memwinon; - bd->memwinoff = pcxi_memwinoff; - bd->globalwinon = pcxi_globalwinon; - bd->txwinon = pcxi_txwinon; - bd->rxwinon = pcxi_rxwinon; - bd->memoff = pcxi_memoff; - bd->assertgwinon = pcxi_assertgwinon; - bd->assertmemoff = pcxi_assertmemoff; - break; - - default: - break; - } - - /* - * Some cards need a memory segment to be defined for use in - * transmit and receive windowing operations. These boards are - * listed in the below switch. In the case of the XI the amount - * of memory on the board is variable so the memory_seg is also - * variable. This code determines what they segment should be. - */ - switch (bd->type) { - case PCXE: - case PCXEVE: - case PC64XE: - bd->memory_seg = 0xf000; - break; - - case PCXI: - board_id = inb((int)bd->port); - if ((board_id & 0x1) == 0x1) { - /* it's an XI card */ - /* Is it a 64K board */ - if ((board_id & 0x30) == 0) - bd->memory_seg = 0xf000; - - /* Is it a 128K board */ - if ((board_id & 0x30) == 0x10) - bd->memory_seg = 0xe000; - - /* Is is a 256K board */ - if ((board_id & 0x30) == 0x20) - bd->memory_seg = 0xc000; - - /* Is it a 512K board */ - if ((board_id & 0x30) == 0x30) - bd->memory_seg = 0x8000; - } else - printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n", (int)bd->port); - break; - } - } - - err = tty_register_driver(pc_driver); - if (err) { - printk(KERN_ERR "Couldn't register Digi PC/ driver"); - goto out3; - } - - err = tty_register_driver(pc_info); - if (err) { - printk(KERN_ERR "Couldn't register Digi PC/ info "); - goto out4; - } - - /* Start up the poller to check for events on all enabled boards */ - init_timer(&epca_timer); - epca_timer.function = epcapoll; - mod_timer(&epca_timer, jiffies + HZ/25); - return 0; - -out4: - tty_unregister_driver(pc_driver); -out3: - put_tty_driver(pc_info); -out2: - put_tty_driver(pc_driver); -out1: - return err; -} - -static void post_fep_init(unsigned int crd) -{ - int i; - void __iomem *memaddr; - struct global_data __iomem *gd; - struct board_info *bd; - struct board_chan __iomem *bc; - struct channel *ch; - int shrinkmem = 0, lowwater; - - /* - * This call is made by the user via. the ioctl call DIGI_INIT. It is - * responsible for setting up all the card specific stuff. - */ - bd = &boards[crd]; - - /* - * If this is a PCI board, get the port info. Remember PCI cards do not - * have entries into the epcaconfig.h file, so we can't get the number - * of ports from it. Unfortunetly, this means that anyone doing a - * DIGI_GETINFO before the board has booted will get an invalid number - * of ports returned (It should return 0). Calls to DIGI_GETINFO after - * DIGI_INIT has been called will return the proper values. - */ - if (bd->type >= PCIXEM) { /* Begin get PCI number of ports */ - /* - * Below we use XEMPORTS as a memory offset regardless of which - * PCI card it is. This is because all of the supported PCI - * cards have the same memory offset for the channel data. This - * will have to be changed if we ever develop a PCI/XE card. - * NOTE : The FEP manual states that the port offset is 0xC22 - * as opposed to 0xC02. This is only true for PC/XE, and PC/XI - * cards; not for the XEM, or CX series. On the PCI cards the - * number of ports is determined by reading a ID PROM located - * in the box attached to the card. The card can then determine - * the index the id to determine the number of ports available. - * (FYI - The id should be located at 0x1ac (And may use up to - * 4 bytes if the box in question is a XEM or CX)). - */ - /* PCI cards are already remapped at this point ISA are not */ - bd->numports = readw(bd->re_map_membase + XEMPORTS); - epcaassert(bd->numports <= 64, "PCI returned a invalid number of ports"); - nbdevs += (bd->numports); - } else { - /* Fix up the mappings for ISA/EISA etc */ - /* FIXME: 64K - can we be smarter ? */ - bd->re_map_membase = ioremap_nocache(bd->membase, 0x10000); - } - - if (crd != 0) - card_ptr[crd] = card_ptr[crd-1] + boards[crd-1].numports; - else - card_ptr[crd] = &digi_channels[crd]; /* <- For card 0 only */ - - ch = card_ptr[crd]; - epcaassert(ch <= &digi_channels[nbdevs - 1], "ch out of range"); - - memaddr = bd->re_map_membase; - - /* - * The below assignment will set bc to point at the BEGINING of the - * cards channel structures. For 1 card there will be between 8 and 64 - * of these structures. - */ - bc = memaddr + CHANSTRUCT; - - /* - * The below assignment will set gd to point at the BEGINING of global - * memory address 0xc00. The first data in that global memory actually - * starts at address 0xc1a. The command in pointer begins at 0xd10. - */ - gd = memaddr + GLOBAL; - - /* - * XEPORTS (address 0xc22) points at the number of channels the card - * supports. (For 64XE, XI, XEM, and XR use 0xc02) - */ - if ((bd->type == PCXEVE || bd->type == PCXE) && - (readw(memaddr + XEPORTS) < 3)) - shrinkmem = 1; - if (bd->type < PCIXEM) - if (!request_region((int)bd->port, 4, board_desc[bd->type])) - return; - memwinon(bd, 0); - - /* - * Remember ch is the main drivers channels structure, while bc is the - * cards channel structure. - */ - for (i = 0; i < bd->numports; i++, ch++, bc++) { - unsigned long flags; - u16 tseg, rseg; - - tty_port_init(&ch->port); - ch->port.ops = &epca_port_ops; - ch->brdchan = bc; - ch->mailbox = gd; - INIT_WORK(&ch->tqueue, do_softint); - ch->board = &boards[crd]; - - spin_lock_irqsave(&epca_lock, flags); - switch (bd->type) { - /* - * Since some of the boards use different bitmaps for - * their control signals we cannot hard code these - * values and retain portability. We virtualize this - * data here. - */ - case EISAXEM: - case PCXEM: - case PCIXEM: - case PCIXRJ: - case PCIXR: - ch->m_rts = 0x02; - ch->m_dcd = 0x80; - ch->m_dsr = 0x20; - ch->m_cts = 0x10; - ch->m_ri = 0x40; - ch->m_dtr = 0x01; - break; - - case PCXE: - case PCXEVE: - case PCXI: - case PC64XE: - ch->m_rts = 0x02; - ch->m_dcd = 0x08; - ch->m_dsr = 0x10; - ch->m_cts = 0x20; - ch->m_ri = 0x40; - ch->m_dtr = 0x80; - break; - } - - if (boards[crd].altpin) { - ch->dsr = ch->m_dcd; - ch->dcd = ch->m_dsr; - ch->digiext.digi_flags |= DIGI_ALTPIN; - } else { - ch->dcd = ch->m_dcd; - ch->dsr = ch->m_dsr; - } - - ch->boardnum = crd; - ch->channelnum = i; - ch->magic = EPCA_MAGIC; - tty_port_tty_set(&ch->port, NULL); - - if (shrinkmem) { - fepcmd(ch, SETBUFFER, 32, 0, 0, 0); - shrinkmem = 0; - } - - tseg = readw(&bc->tseg); - rseg = readw(&bc->rseg); - - switch (bd->type) { - case PCIXEM: - case PCIXRJ: - case PCIXR: - /* Cover all the 2MEG cards */ - ch->txptr = memaddr + ((tseg << 4) & 0x1fffff); - ch->rxptr = memaddr + ((rseg << 4) & 0x1fffff); - ch->txwin = FEPWIN | (tseg >> 11); - ch->rxwin = FEPWIN | (rseg >> 11); - break; - - case PCXEM: - case EISAXEM: - /* Cover all the 32K windowed cards */ - /* Mask equal to window size - 1 */ - ch->txptr = memaddr + ((tseg << 4) & 0x7fff); - ch->rxptr = memaddr + ((rseg << 4) & 0x7fff); - ch->txwin = FEPWIN | (tseg >> 11); - ch->rxwin = FEPWIN | (rseg >> 11); - break; - - case PCXEVE: - case PCXE: - ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) - & 0x1fff); - ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9); - ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) - & 0x1fff); - ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >> 9); - break; - - case PCXI: - case PC64XE: - ch->txptr = memaddr + ((tseg - bd->memory_seg) << 4); - ch->rxptr = memaddr + ((rseg - bd->memory_seg) << 4); - ch->txwin = ch->rxwin = 0; - break; - } - - ch->txbufhead = 0; - ch->txbufsize = readw(&bc->tmax) + 1; - - ch->rxbufhead = 0; - ch->rxbufsize = readw(&bc->rmax) + 1; - - lowwater = ch->txbufsize >= 2000 ? 1024 : (ch->txbufsize / 2); - - /* Set transmitter low water mark */ - fepcmd(ch, STXLWATER, lowwater, 0, 10, 0); - - /* Set receiver low water mark */ - fepcmd(ch, SRXLWATER, (ch->rxbufsize / 4), 0, 10, 0); - - /* Set receiver high water mark */ - fepcmd(ch, SRXHWATER, (3 * ch->rxbufsize / 4), 0, 10, 0); - - writew(100, &bc->edelay); - writeb(1, &bc->idata); - - ch->startc = readb(&bc->startc); - ch->stopc = readb(&bc->stopc); - ch->startca = readb(&bc->startca); - ch->stopca = readb(&bc->stopca); - - ch->fepcflag = 0; - ch->fepiflag = 0; - ch->fepoflag = 0; - ch->fepstartc = 0; - ch->fepstopc = 0; - ch->fepstartca = 0; - ch->fepstopca = 0; - - ch->port.close_delay = 50; - - spin_unlock_irqrestore(&epca_lock, flags); - } - - printk(KERN_INFO - "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n", - VERSION, board_desc[bd->type], (long)bd->port, - (long)bd->membase, bd->numports); - memwinoff(bd, 0); -} - -static void epcapoll(unsigned long ignored) -{ - unsigned long flags; - int crd; - unsigned int head, tail; - struct channel *ch; - struct board_info *bd; - - /* - * This routine is called upon every timer interrupt. Even though the - * Digi series cards are capable of generating interrupts this method - * of non-looping polling is more efficient. This routine checks for - * card generated events (Such as receive data, are transmit buffer - * empty) and acts on those events. - */ - for (crd = 0; crd < num_cards; crd++) { - bd = &boards[crd]; - ch = card_ptr[crd]; - - if ((bd->status == DISABLED) || digi_poller_inhibited) - continue; - - /* - * assertmemoff is not needed here; indeed it is an empty - * subroutine. It is being kept because future boards may need - * this as well as some legacy boards. - */ - spin_lock_irqsave(&epca_lock, flags); - - assertmemoff(ch); - - globalwinon(ch); - - /* - * In this case head and tail actually refer to the event queue - * not the transmit or receive queue. - */ - head = readw(&ch->mailbox->ein); - tail = readw(&ch->mailbox->eout); - - /* If head isn't equal to tail we have an event */ - if (head != tail) - doevent(crd); - memoff(ch); - - spin_unlock_irqrestore(&epca_lock, flags); - } /* End for each card */ - mod_timer(&epca_timer, jiffies + (HZ / 25)); -} - -static void doevent(int crd) -{ - void __iomem *eventbuf; - struct channel *ch, *chan0; - static struct tty_struct *tty; - struct board_info *bd; - struct board_chan __iomem *bc; - unsigned int tail, head; - int event, channel; - int mstat, lstat; - - /* - * This subroutine is called by epcapoll when an event is detected - * in the event queue. This routine responds to those events. - */ - bd = &boards[crd]; - - chan0 = card_ptr[crd]; - epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range"); - assertgwinon(chan0); - while ((tail = readw(&chan0->mailbox->eout)) != - (head = readw(&chan0->mailbox->ein))) { - /* Begin while something in event queue */ - assertgwinon(chan0); - eventbuf = bd->re_map_membase + tail + ISTART; - /* Get the channel the event occurred on */ - channel = readb(eventbuf); - /* Get the actual event code that occurred */ - event = readb(eventbuf + 1); - /* - * The two assignments below get the current modem status - * (mstat) and the previous modem status (lstat). These are - * useful becuase an event could signal a change in modem - * signals itself. - */ - mstat = readb(eventbuf + 2); - lstat = readb(eventbuf + 3); - - ch = chan0 + channel; - if ((unsigned)channel >= bd->numports || !ch) { - if (channel >= bd->numports) - ch = chan0; - bc = ch->brdchan; - goto next; - } - - bc = ch->brdchan; - if (bc == NULL) - goto next; - - tty = tty_port_tty_get(&ch->port); - if (event & DATA_IND) { /* Begin DATA_IND */ - receive_data(ch, tty); - assertgwinon(ch); - } /* End DATA_IND */ - /* else *//* Fix for DCD transition missed bug */ - if (event & MODEMCHG_IND) { - /* A modem signal change has been indicated */ - ch->imodem = mstat; - if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) { - /* We are now receiving dcd */ - if (mstat & ch->dcd) - wake_up_interruptible(&ch->port.open_wait); - else /* No dcd; hangup */ - pc_sched_event(ch, EPCA_EVENT_HANGUP); - } - } - if (tty) { - if (event & BREAK_IND) { - /* A break has been indicated */ - tty_insert_flip_char(tty, 0, TTY_BREAK); - tty_schedule_flip(tty); - } else if (event & LOWTX_IND) { - if (ch->statusflags & LOWWAIT) { - ch->statusflags &= ~LOWWAIT; - tty_wakeup(tty); - } - } else if (event & EMPTYTX_IND) { - /* This event is generated by - setup_empty_event */ - ch->statusflags &= ~TXBUSY; - if (ch->statusflags & EMPTYWAIT) { - ch->statusflags &= ~EMPTYWAIT; - tty_wakeup(tty); - } - } - tty_kref_put(tty); - } -next: - globalwinon(ch); - BUG_ON(!bc); - writew(1, &bc->idata); - writew((tail + 4) & (IMAX - ISTART - 4), &chan0->mailbox->eout); - globalwinon(chan0); - } /* End while something in event queue */ -} - -static void fepcmd(struct channel *ch, int cmd, int word_or_byte, - int byte2, int ncmds, int bytecmd) -{ - unchar __iomem *memaddr; - unsigned int head, cmdTail, cmdStart, cmdMax; - long count; - int n; - - /* This is the routine in which commands may be passed to the card. */ - - if (ch->board->status == DISABLED) - return; - assertgwinon(ch); - /* Remember head (As well as max) is just an offset not a base addr */ - head = readw(&ch->mailbox->cin); - /* cmdStart is a base address */ - cmdStart = readw(&ch->mailbox->cstart); - /* - * We do the addition below because we do not want a max pointer - * relative to cmdStart. We want a max pointer that points at the - * physical end of the command queue. - */ - cmdMax = (cmdStart + 4 + readw(&ch->mailbox->cmax)); - memaddr = ch->board->re_map_membase; - - if (head >= (cmdMax - cmdStart) || (head & 03)) { - printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", - __LINE__, cmd, head); - printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", - __LINE__, cmdMax, cmdStart); - return; - } - if (bytecmd) { - writeb(cmd, memaddr + head + cmdStart + 0); - writeb(ch->channelnum, memaddr + head + cmdStart + 1); - /* Below word_or_byte is bits to set */ - writeb(word_or_byte, memaddr + head + cmdStart + 2); - /* Below byte2 is bits to reset */ - writeb(byte2, memaddr + head + cmdStart + 3); - } else { - writeb(cmd, memaddr + head + cmdStart + 0); - writeb(ch->channelnum, memaddr + head + cmdStart + 1); - writeb(word_or_byte, memaddr + head + cmdStart + 2); - } - head = (head + 4) & (cmdMax - cmdStart - 4); - writew(head, &ch->mailbox->cin); - count = FEPTIMEOUT; - - for (;;) { - count--; - if (count == 0) { - printk(KERN_ERR " - Fep not responding in fepcmd()\n"); - return; - } - head = readw(&ch->mailbox->cin); - cmdTail = readw(&ch->mailbox->cout); - n = (head - cmdTail) & (cmdMax - cmdStart - 4); - /* - * Basically this will break when the FEP acknowledges the - * command by incrementing cmdTail (Making it equal to head). - */ - if (n <= ncmds * (sizeof(short) * 4)) - break; - } -} - -/* - * Digi products use fields in their channels structures that are very similar - * to the c_cflag and c_iflag fields typically found in UNIX termios - * structures. The below three routines allow mappings between these hardware - * "flags" and their respective Linux flags. - */ -static unsigned termios2digi_h(struct channel *ch, unsigned cflag) -{ - unsigned res = 0; - - if (cflag & CRTSCTS) { - ch->digiext.digi_flags |= (RTSPACE | CTSPACE); - res |= ((ch->m_cts) | (ch->m_rts)); - } - - if (ch->digiext.digi_flags & RTSPACE) - res |= ch->m_rts; - - if (ch->digiext.digi_flags & DTRPACE) - res |= ch->m_dtr; - - if (ch->digiext.digi_flags & CTSPACE) - res |= ch->m_cts; - - if (ch->digiext.digi_flags & DSRPACE) - res |= ch->dsr; - - if (ch->digiext.digi_flags & DCDPACE) - res |= ch->dcd; - - if (res & (ch->m_rts)) - ch->digiext.digi_flags |= RTSPACE; - - if (res & (ch->m_cts)) - ch->digiext.digi_flags |= CTSPACE; - - return res; -} - -static unsigned termios2digi_i(struct channel *ch, unsigned iflag) -{ - unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK | - INPCK | ISTRIP | IXON | IXANY | IXOFF); - if (ch->digiext.digi_flags & DIGI_AIXON) - res |= IAIXON; - return res; -} - -static unsigned termios2digi_c(struct channel *ch, unsigned cflag) -{ - unsigned res = 0; - if (cflag & CBAUDEX) { - ch->digiext.digi_flags |= DIGI_FAST; - /* - * HUPCL bit is used by FEP to indicate fast baud table is to - * be used. - */ - res |= FEP_HUPCL; - } else - ch->digiext.digi_flags &= ~DIGI_FAST; - /* - * CBAUD has bit position 0x1000 set these days to indicate Linux - * baud rate remap. Digi hardware can't handle the bit assignment. - * (We use a different bit assignment for high speed.). Clear this - * bit out. - */ - res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE); - /* - * This gets a little confusing. The Digi cards have their own - * representation of c_cflags controlling baud rate. For the most part - * this is identical to the Linux implementation. However; Digi - * supports one rate (76800) that Linux doesn't. This means that the - * c_cflag entry that would normally mean 76800 for Digi actually means - * 115200 under Linux. Without the below mapping, a stty 115200 would - * only drive the board at 76800. Since the rate 230400 is also found - * after 76800, the same problem afflicts us when we choose a rate of - * 230400. Without the below modificiation stty 230400 would actually - * give us 115200. - * - * There are two additional differences. The Linux value for CLOCAL - * (0x800; 0004000) has no meaning to the Digi hardware. Also in later - * releases of Linux; the CBAUD define has CBAUDEX (0x1000; 0010000) - * ored into it (CBAUD = 0x100f as opposed to 0xf). CBAUDEX should be - * checked for a screened out prior to termios2digi_c returning. Since - * CLOCAL isn't used by the board this can be ignored as long as the - * returned value is used only by Digi hardware. - */ - if (cflag & CBAUDEX) { - /* - * The below code is trying to guarantee that only baud rates - * 115200 and 230400 are remapped. We use exclusive or because - * the various baud rates share common bit positions and - * therefore can't be tested for easily. - */ - if ((!((cflag & 0x7) ^ (B115200 & ~CBAUDEX))) || - (!((cflag & 0x7) ^ (B230400 & ~CBAUDEX)))) - res += 1; - } - return res; -} - -/* Caller must hold the locks */ -static void epcaparam(struct tty_struct *tty, struct channel *ch) -{ - unsigned int cmdHead; - struct ktermios *ts; - struct board_chan __iomem *bc; - unsigned mval, hflow, cflag, iflag; - - bc = ch->brdchan; - epcaassert(bc != NULL, "bc out of range"); - - assertgwinon(ch); - ts = tty->termios; - if ((ts->c_cflag & CBAUD) == 0) { /* Begin CBAUD detected */ - cmdHead = readw(&bc->rin); - writew(cmdHead, &bc->rout); - cmdHead = readw(&bc->tin); - /* Changing baud in mid-stream transmission can be wonderful */ - /* - * Flush current transmit buffer by setting cmdTail pointer - * (tout) to cmdHead pointer (tin). Hopefully the transmit - * buffer is empty. - */ - fepcmd(ch, STOUT, (unsigned) cmdHead, 0, 0, 0); - mval = 0; - } else { /* Begin CBAUD not detected */ - /* - * c_cflags have changed but that change had nothing to do with - * BAUD. Propagate the change to the card. - */ - cflag = termios2digi_c(ch, ts->c_cflag); - if (cflag != ch->fepcflag) { - ch->fepcflag = cflag; - /* Set baud rate, char size, stop bits, parity */ - fepcmd(ch, SETCTRLFLAGS, (unsigned) cflag, 0, 0, 0); - } - /* - * If the user has not forced CLOCAL and if the device is not a - * CALLOUT device (Which is always CLOCAL) we set flags such - * that the driver will wait on carrier detect. - */ - if (ts->c_cflag & CLOCAL) - clear_bit(ASYNCB_CHECK_CD, &ch->port.flags); - else - set_bit(ASYNCB_CHECK_CD, &ch->port.flags); - mval = ch->m_dtr | ch->m_rts; - } /* End CBAUD not detected */ - iflag = termios2digi_i(ch, ts->c_iflag); - /* Check input mode flags */ - if (iflag != ch->fepiflag) { - ch->fepiflag = iflag; - /* - * Command sets channels iflag structure on the board. Such - * things as input soft flow control, handling of parity - * errors, and break handling are all set here. - * - * break handling, parity handling, input stripping, - * flow control chars - */ - fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0); - } - /* - * Set the board mint value for this channel. This will cause hardware - * events to be generated each time the DCD signal (Described in mint) - * changes. - */ - writeb(ch->dcd, &bc->mint); - if ((ts->c_cflag & CLOCAL) || (ch->digiext.digi_flags & DIGI_FORCEDCD)) - if (ch->digiext.digi_flags & DIGI_FORCEDCD) - writeb(0, &bc->mint); - ch->imodem = readb(&bc->mstat); - hflow = termios2digi_h(ch, ts->c_cflag); - if (hflow != ch->hflow) { - ch->hflow = hflow; - /* - * Hard flow control has been selected but the board is not - * using it. Activate hard flow control now. - */ - fepcmd(ch, SETHFLOW, hflow, 0xff, 0, 1); - } - mval ^= ch->modemfake & (mval ^ ch->modem); - - if (ch->omodem ^ mval) { - ch->omodem = mval; - /* - * The below command sets the DTR and RTS mstat structure. If - * hard flow control is NOT active these changes will drive the - * output of the actual DTR and RTS lines. If hard flow control - * is active, the changes will be saved in the mstat structure - * and only asserted when hard flow control is turned off. - */ - - /* First reset DTR & RTS; then set them */ - fepcmd(ch, SETMODEM, 0, ((ch->m_dtr)|(ch->m_rts)), 0, 1); - fepcmd(ch, SETMODEM, mval, 0, 0, 1); - } - if (ch->startc != ch->fepstartc || ch->stopc != ch->fepstopc) { - ch->fepstartc = ch->startc; - ch->fepstopc = ch->stopc; - /* - * The XON / XOFF characters have changed; propagate these - * changes to the card. - */ - fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1); - } - if (ch->startca != ch->fepstartca || ch->stopca != ch->fepstopca) { - ch->fepstartca = ch->startca; - ch->fepstopca = ch->stopca; - /* - * Similar to the above, this time the auxilarly XON / XOFF - * characters have changed; propagate these changes to the card. - */ - fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1); - } -} - -/* Caller holds lock */ -static void receive_data(struct channel *ch, struct tty_struct *tty) -{ - unchar *rptr; - struct ktermios *ts = NULL; - struct board_chan __iomem *bc; - int dataToRead, wrapgap, bytesAvailable; - unsigned int tail, head; - unsigned int wrapmask; - - /* - * This routine is called by doint when a receive data event has taken - * place. - */ - globalwinon(ch); - if (ch->statusflags & RXSTOPPED) - return; - if (tty) - ts = tty->termios; - bc = ch->brdchan; - BUG_ON(!bc); - wrapmask = ch->rxbufsize - 1; - - /* - * Get the head and tail pointers to the receiver queue. Wrap the head - * pointer if it has reached the end of the buffer. - */ - head = readw(&bc->rin); - head &= wrapmask; - tail = readw(&bc->rout) & wrapmask; - - bytesAvailable = (head - tail) & wrapmask; - if (bytesAvailable == 0) - return; - - /* If CREAD bit is off or device not open, set TX tail to head */ - if (!tty || !ts || !(ts->c_cflag & CREAD)) { - writew(head, &bc->rout); - return; - } - - if (tty_buffer_request_room(tty, bytesAvailable + 1) == 0) - return; - - if (readb(&bc->orun)) { - writeb(0, &bc->orun); - printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n", - tty->name); - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - rxwinon(ch); - while (bytesAvailable > 0) { - /* Begin while there is data on the card */ - wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail; - /* - * Even if head has wrapped around only report the amount of - * data to be equal to the size - tail. Remember memcpy can't - * automaticly wrap around the receive buffer. - */ - dataToRead = (wrapgap < bytesAvailable) ? wrapgap - : bytesAvailable; - /* Make sure we don't overflow the buffer */ - dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead); - if (dataToRead == 0) - break; - /* - * Move data read from our card into the line disciplines - * buffer for translation if necessary. - */ - memcpy_fromio(rptr, ch->rxptr + tail, dataToRead); - tail = (tail + dataToRead) & wrapmask; - bytesAvailable -= dataToRead; - } /* End while there is data on the card */ - globalwinon(ch); - writew(tail, &bc->rout); - /* Must be called with global data */ - tty_schedule_flip(tty); -} - -static int info_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - switch (cmd) { - case DIGI_GETINFO: - { - struct digi_info di; - int brd; - - if (get_user(brd, (unsigned int __user *)arg)) - return -EFAULT; - if (brd < 0 || brd >= num_cards || num_cards == 0) - return -ENODEV; - - memset(&di, 0, sizeof(di)); - - di.board = brd; - di.status = boards[brd].status; - di.type = boards[brd].type ; - di.numports = boards[brd].numports ; - /* Legacy fixups - just move along nothing to see */ - di.port = (unsigned char *)boards[brd].port ; - di.membase = (unsigned char *)boards[brd].membase ; - - if (copy_to_user((void __user *)arg, &di, sizeof(di))) - return -EFAULT; - break; - - } - - case DIGI_POLLER: - { - int brd = arg & 0xff000000 >> 16; - unsigned char state = arg & 0xff; - - if (brd < 0 || brd >= num_cards) { - printk(KERN_ERR "epca: DIGI POLLER : brd not valid!\n"); - return -ENODEV; - } - digi_poller_inhibited = state; - break; - } - - case DIGI_INIT: - { - /* - * This call is made by the apps to complete the - * initialization of the board(s). This routine is - * responsible for setting the card to its initial - * state and setting the drivers control fields to the - * sutianle settings for the card in question. - */ - int crd; - for (crd = 0; crd < num_cards; crd++) - post_fep_init(crd); - break; - } - default: - return -ENOTTY; - } - return 0; -} - -static int pc_tiocmget(struct tty_struct *tty) -{ - struct channel *ch = tty->driver_data; - struct board_chan __iomem *bc; - unsigned int mstat, mflag = 0; - unsigned long flags; - - if (ch) - bc = ch->brdchan; - else - return -EINVAL; - - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - mstat = readb(&bc->mstat); - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - - if (mstat & ch->m_dtr) - mflag |= TIOCM_DTR; - if (mstat & ch->m_rts) - mflag |= TIOCM_RTS; - if (mstat & ch->m_cts) - mflag |= TIOCM_CTS; - if (mstat & ch->dsr) - mflag |= TIOCM_DSR; - if (mstat & ch->m_ri) - mflag |= TIOCM_RI; - if (mstat & ch->dcd) - mflag |= TIOCM_CD; - return mflag; -} - -static int pc_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct channel *ch = tty->driver_data; - unsigned long flags; - - if (!ch) - return -EINVAL; - - spin_lock_irqsave(&epca_lock, flags); - /* - * I think this modemfake stuff is broken. It doesn't correctly reflect - * the behaviour desired by the TIOCM* ioctls. Therefore this is - * probably broken. - */ - if (set & TIOCM_RTS) { - ch->modemfake |= ch->m_rts; - ch->modem |= ch->m_rts; - } - if (set & TIOCM_DTR) { - ch->modemfake |= ch->m_dtr; - ch->modem |= ch->m_dtr; - } - if (clear & TIOCM_RTS) { - ch->modemfake |= ch->m_rts; - ch->modem &= ~ch->m_rts; - } - if (clear & TIOCM_DTR) { - ch->modemfake |= ch->m_dtr; - ch->modem &= ~ch->m_dtr; - } - globalwinon(ch); - /* - * The below routine generally sets up parity, baud, flow control - * issues, etc.... It effect both control flags and input flags. - */ - epcaparam(tty, ch); - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - return 0; -} - -static int pc_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - digiflow_t dflow; - unsigned long flags; - unsigned int mflag, mstat; - unsigned char startc, stopc; - struct board_chan __iomem *bc; - struct channel *ch = tty->driver_data; - void __user *argp = (void __user *)arg; - - if (ch) - bc = ch->brdchan; - else - return -EINVAL; - switch (cmd) { - case TIOCMODG: - mflag = pc_tiocmget(tty); - if (put_user(mflag, (unsigned long __user *)argp)) - return -EFAULT; - break; - case TIOCMODS: - if (get_user(mstat, (unsigned __user *)argp)) - return -EFAULT; - return pc_tiocmset(tty, mstat, ~mstat); - case TIOCSDTR: - spin_lock_irqsave(&epca_lock, flags); - ch->omodem |= ch->m_dtr; - globalwinon(ch); - fepcmd(ch, SETMODEM, ch->m_dtr, 0, 10, 1); - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - break; - - case TIOCCDTR: - spin_lock_irqsave(&epca_lock, flags); - ch->omodem &= ~ch->m_dtr; - globalwinon(ch); - fepcmd(ch, SETMODEM, 0, ch->m_dtr, 10, 1); - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - break; - case DIGI_GETA: - if (copy_to_user(argp, &ch->digiext, sizeof(digi_t))) - return -EFAULT; - break; - case DIGI_SETAW: - case DIGI_SETAF: - if (cmd == DIGI_SETAW) { - /* Setup an event to indicate when the transmit - buffer empties */ - spin_lock_irqsave(&epca_lock, flags); - setup_empty_event(tty, ch); - spin_unlock_irqrestore(&epca_lock, flags); - tty_wait_until_sent(tty, 0); - } else { - /* ldisc lock already held in ioctl */ - if (tty->ldisc->ops->flush_buffer) - tty->ldisc->ops->flush_buffer(tty); - } - /* Fall Thru */ - case DIGI_SETA: - if (copy_from_user(&ch->digiext, argp, sizeof(digi_t))) - return -EFAULT; - - if (ch->digiext.digi_flags & DIGI_ALTPIN) { - ch->dcd = ch->m_dsr; - ch->dsr = ch->m_dcd; - } else { - ch->dcd = ch->m_dcd; - ch->dsr = ch->m_dsr; - } - - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - - /* - * The below routine generally sets up parity, baud, flow - * control issues, etc.... It effect both control flags and - * input flags. - */ - epcaparam(tty, ch); - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - break; - - case DIGI_GETFLOW: - case DIGI_GETAFLOW: - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - if (cmd == DIGI_GETFLOW) { - dflow.startc = readb(&bc->startc); - dflow.stopc = readb(&bc->stopc); - } else { - dflow.startc = readb(&bc->startca); - dflow.stopc = readb(&bc->stopca); - } - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - - if (copy_to_user(argp, &dflow, sizeof(dflow))) - return -EFAULT; - break; - - case DIGI_SETAFLOW: - case DIGI_SETFLOW: - if (cmd == DIGI_SETFLOW) { - startc = ch->startc; - stopc = ch->stopc; - } else { - startc = ch->startca; - stopc = ch->stopca; - } - - if (copy_from_user(&dflow, argp, sizeof(dflow))) - return -EFAULT; - - if (dflow.startc != startc || dflow.stopc != stopc) { - /* Begin if setflow toggled */ - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - - if (cmd == DIGI_SETFLOW) { - ch->fepstartc = ch->startc = dflow.startc; - ch->fepstopc = ch->stopc = dflow.stopc; - fepcmd(ch, SONOFFC, ch->fepstartc, - ch->fepstopc, 0, 1); - } else { - ch->fepstartca = ch->startca = dflow.startc; - ch->fepstopca = ch->stopca = dflow.stopc; - fepcmd(ch, SAUXONOFFC, ch->fepstartca, - ch->fepstopca, 0, 1); - } - - if (ch->statusflags & TXSTOPPED) - pc_start(tty); - - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - } /* End if setflow toggled */ - break; - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct channel *ch; - unsigned long flags; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - - if (ch != NULL) { /* Begin if channel valid */ - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - epcaparam(tty, ch); - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && - ((tty->termios->c_cflag & CRTSCTS) == 0)) - tty->hw_stopped = 0; - - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&ch->port.open_wait); - - } /* End if channel valid */ -} - -static void do_softint(struct work_struct *work) -{ - struct channel *ch = container_of(work, struct channel, tqueue); - /* Called in response to a modem change event */ - if (ch && ch->magic == EPCA_MAGIC) { - struct tty_struct *tty = tty_port_tty_get(&ch->port); - - if (tty && tty->driver_data) { - if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { - tty_hangup(tty); - wake_up_interruptible(&ch->port.open_wait); - clear_bit(ASYNCB_NORMAL_ACTIVE, - &ch->port.flags); - } - } - tty_kref_put(tty); - } -} - -/* - * pc_stop and pc_start provide software flow control to the routine and the - * pc_ioctl routine. - */ -static void pc_stop(struct tty_struct *tty) -{ - struct channel *ch; - unsigned long flags; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch != NULL) { - spin_lock_irqsave(&epca_lock, flags); - if ((ch->statusflags & TXSTOPPED) == 0) { - /* Begin if transmit stop requested */ - globalwinon(ch); - /* STOP transmitting now !! */ - fepcmd(ch, PAUSETX, 0, 0, 0, 0); - ch->statusflags |= TXSTOPPED; - memoff(ch); - } /* End if transmit stop requested */ - spin_unlock_irqrestore(&epca_lock, flags); - } -} - -static void pc_start(struct tty_struct *tty) -{ - struct channel *ch; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch != NULL) { - unsigned long flags; - spin_lock_irqsave(&epca_lock, flags); - /* Just in case output was resumed because of a change - in Digi-flow */ - if (ch->statusflags & TXSTOPPED) { - /* Begin transmit resume requested */ - struct board_chan __iomem *bc; - globalwinon(ch); - bc = ch->brdchan; - if (ch->statusflags & LOWWAIT) - writeb(1, &bc->ilow); - /* Okay, you can start transmitting again... */ - fepcmd(ch, RESUMETX, 0, 0, 0, 0); - ch->statusflags &= ~TXSTOPPED; - memoff(ch); - } /* End transmit resume requested */ - spin_unlock_irqrestore(&epca_lock, flags); - } -} - -/* - * The below routines pc_throttle and pc_unthrottle are used to slow (And - * resume) the receipt of data into the kernels receive buffers. The exact - * occurrence of this depends on the size of the kernels receive buffer and - * what the 'watermarks' are set to for that buffer. See the n_ttys.c file for - * more details. - */ -static void pc_throttle(struct tty_struct *tty) -{ - struct channel *ch; - unsigned long flags; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch != NULL) { - spin_lock_irqsave(&epca_lock, flags); - if ((ch->statusflags & RXSTOPPED) == 0) { - globalwinon(ch); - fepcmd(ch, PAUSERX, 0, 0, 0, 0); - ch->statusflags |= RXSTOPPED; - memoff(ch); - } - spin_unlock_irqrestore(&epca_lock, flags); - } -} - -static void pc_unthrottle(struct tty_struct *tty) -{ - struct channel *ch; - unsigned long flags; - /* - * verifyChannel returns the channel from the tty struct if it is - * valid. This serves as a sanity check. - */ - ch = verifyChannel(tty); - if (ch != NULL) { - /* Just in case output was resumed because of a change - in Digi-flow */ - spin_lock_irqsave(&epca_lock, flags); - if (ch->statusflags & RXSTOPPED) { - globalwinon(ch); - fepcmd(ch, RESUMERX, 0, 0, 0, 0); - ch->statusflags &= ~RXSTOPPED; - memoff(ch); - } - spin_unlock_irqrestore(&epca_lock, flags); - } -} - -static int pc_send_break(struct tty_struct *tty, int msec) -{ - struct channel *ch = tty->driver_data; - unsigned long flags; - - if (msec == -1) - msec = 0xFFFF; - else if (msec > 0xFFFE) - msec = 0xFFFE; - else if (msec < 1) - msec = 1; - - spin_lock_irqsave(&epca_lock, flags); - globalwinon(ch); - /* - * Maybe I should send an infinite break here, schedule() for msec - * amount of time, and then stop the break. This way, the user can't - * screw up the FEP by causing digi_send_break() to be called (i.e. via - * an ioctl()) more than once in msec amount of time. - * Try this for now... - */ - fepcmd(ch, SENDBREAK, msec, 0, 10, 0); - memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); - return 0; -} - -/* Caller MUST hold the lock */ -static void setup_empty_event(struct tty_struct *tty, struct channel *ch) -{ - struct board_chan __iomem *bc = ch->brdchan; - - globalwinon(ch); - ch->statusflags |= EMPTYWAIT; - /* - * When set the iempty flag request a event to be generated when the - * transmit buffer is empty (If there is no BREAK in progress). - */ - writeb(1, &bc->iempty); - memoff(ch); -} - -#ifndef MODULE -static void __init epca_setup(char *str, int *ints) -{ - struct board_info board; - int index, loop, last; - char *temp, *t2; - unsigned len; - - /* - * If this routine looks a little strange it is because it is only - * called if a LILO append command is given to boot the kernel with - * parameters. In this way, we can provide the user a method of - * changing his board configuration without rebuilding the kernel. - */ - if (!liloconfig) - liloconfig = 1; - - memset(&board, 0, sizeof(board)); - - /* Assume the data is int first, later we can change it */ - /* I think that array position 0 of ints holds the number of args */ - for (last = 0, index = 1; index <= ints[0]; index++) - switch (index) { /* Begin parse switch */ - case 1: - board.status = ints[index]; - /* - * We check for 2 (As opposed to 1; because 2 is a flag - * instructing the driver to ignore epcaconfig.) For - * this reason we check for 2. - */ - if (board.status == 2) { - /* Begin ignore epcaconfig as well as lilo cmd line */ - nbdevs = 0; - num_cards = 0; - return; - } /* End ignore epcaconfig as well as lilo cmd line */ - - if (board.status > 2) { - printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", - board.status); - invalid_lilo_config = 1; - setup_error_code |= INVALID_BOARD_STATUS; - return; - } - last = index; - break; - case 2: - board.type = ints[index]; - if (board.type >= PCIXEM) { - printk(KERN_ERR "epca_setup: Invalid board type 0x%x\n", board.type); - invalid_lilo_config = 1; - setup_error_code |= INVALID_BOARD_TYPE; - return; - } - last = index; - break; - case 3: - board.altpin = ints[index]; - if (board.altpin > 1) { - printk(KERN_ERR "epca_setup: Invalid board altpin 0x%x\n", board.altpin); - invalid_lilo_config = 1; - setup_error_code |= INVALID_ALTPIN; - return; - } - last = index; - break; - - case 4: - board.numports = ints[index]; - if (board.numports < 2 || board.numports > 256) { - printk(KERN_ERR "epca_setup: Invalid board numports 0x%x\n", board.numports); - invalid_lilo_config = 1; - setup_error_code |= INVALID_NUM_PORTS; - return; - } - nbdevs += board.numports; - last = index; - break; - - case 5: - board.port = ints[index]; - if (ints[index] <= 0) { - printk(KERN_ERR "epca_setup: Invalid io port 0x%x\n", (unsigned int)board.port); - invalid_lilo_config = 1; - setup_error_code |= INVALID_PORT_BASE; - return; - } - last = index; - break; - - case 6: - board.membase = ints[index]; - if (ints[index] <= 0) { - printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n", - (unsigned int)board.membase); - invalid_lilo_config = 1; - setup_error_code |= INVALID_MEM_BASE; - return; - } - last = index; - break; - - default: - printk(KERN_ERR " - epca_setup: Too many integer parms\n"); - return; - - } /* End parse switch */ - - while (str && *str) { /* Begin while there is a string arg */ - /* find the next comma or terminator */ - temp = str; - /* While string is not null, and a comma hasn't been found */ - while (*temp && (*temp != ',')) - temp++; - if (!*temp) - temp = NULL; - else - *temp++ = 0; - /* Set index to the number of args + 1 */ - index = last + 1; - - switch (index) { - case 1: - len = strlen(str); - if (strncmp("Disable", str, len) == 0) - board.status = 0; - else if (strncmp("Enable", str, len) == 0) - board.status = 1; - else { - printk(KERN_ERR "epca_setup: Invalid status %s\n", str); - invalid_lilo_config = 1; - setup_error_code |= INVALID_BOARD_STATUS; - return; - } - last = index; - break; - - case 2: - for (loop = 0; loop < EPCA_NUM_TYPES; loop++) - if (strcmp(board_desc[loop], str) == 0) - break; - /* - * If the index incremented above refers to a - * legitamate board type set it here. - */ - if (index < EPCA_NUM_TYPES) - board.type = loop; - else { - printk(KERN_ERR "epca_setup: Invalid board type: %s\n", str); - invalid_lilo_config = 1; - setup_error_code |= INVALID_BOARD_TYPE; - return; - } - last = index; - break; - - case 3: - len = strlen(str); - if (strncmp("Disable", str, len) == 0) - board.altpin = 0; - else if (strncmp("Enable", str, len) == 0) - board.altpin = 1; - else { - printk(KERN_ERR "epca_setup: Invalid altpin %s\n", str); - invalid_lilo_config = 1; - setup_error_code |= INVALID_ALTPIN; - return; - } - last = index; - break; - - case 4: - t2 = str; - while (isdigit(*t2)) - t2++; - - if (*t2) { - printk(KERN_ERR "epca_setup: Invalid port count %s\n", str); - invalid_lilo_config = 1; - setup_error_code |= INVALID_NUM_PORTS; - return; - } - - /* - * There is not a man page for simple_strtoul but the - * code can be found in vsprintf.c. The first argument - * is the string to translate (To an unsigned long - * obviously), the second argument can be the address - * of any character variable or a NULL. If a variable - * is given, the end pointer of the string will be - * stored in that variable; if a NULL is given the end - * pointer will not be returned. The last argument is - * the base to use. If a 0 is indicated, the routine - * will attempt to determine the proper base by looking - * at the values prefix (A '0' for octal, a 'x' for - * hex, etc ... If a value is given it will use that - * value as the base. - */ - board.numports = simple_strtoul(str, NULL, 0); - nbdevs += board.numports; - last = index; - break; - - case 5: - t2 = str; - while (isxdigit(*t2)) - t2++; - - if (*t2) { - printk(KERN_ERR "epca_setup: Invalid i/o address %s\n", str); - invalid_lilo_config = 1; - setup_error_code |= INVALID_PORT_BASE; - return; - } - - board.port = simple_strtoul(str, NULL, 16); - last = index; - break; - - case 6: - t2 = str; - while (isxdigit(*t2)) - t2++; - - if (*t2) { - printk(KERN_ERR "epca_setup: Invalid memory base %s\n", str); - invalid_lilo_config = 1; - setup_error_code |= INVALID_MEM_BASE; - return; - } - board.membase = simple_strtoul(str, NULL, 16); - last = index; - break; - default: - printk(KERN_ERR "epca: Too many string parms\n"); - return; - } - str = temp; - } /* End while there is a string arg */ - - if (last < 6) { - printk(KERN_ERR "epca: Insufficient parms specified\n"); - return; - } - - /* I should REALLY validate the stuff here */ - /* Copies our local copy of board into boards */ - memcpy((void *)&boards[num_cards], (void *)&board, sizeof(board)); - /* Does this get called once per lilo arg are what ? */ - printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n", - num_cards, board_desc[board.type], - board.numports, (int)board.port, (unsigned int) board.membase); - num_cards++; -} - -static int __init epca_real_setup(char *str) -{ - int ints[11]; - - epca_setup(get_options(str, 11, ints), ints); - return 1; -} - -__setup("digiepca", epca_real_setup); -#endif - -enum epic_board_types { - brd_xr = 0, - brd_xem, - brd_cx, - brd_xrj, -}; - -/* indexed directly by epic_board_types enum */ -static struct { - unsigned char board_type; - unsigned bar_idx; /* PCI base address region */ -} epca_info_tbl[] = { - { PCIXR, 0, }, - { PCIXEM, 0, }, - { PCICX, 0, }, - { PCIXRJ, 2, }, -}; - -static int __devinit epca_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - static int board_num = -1; - int board_idx, info_idx = ent->driver_data; - unsigned long addr; - - if (pci_enable_device(pdev)) - return -EIO; - - board_num++; - board_idx = board_num + num_cards; - if (board_idx >= MAXBOARDS) - goto err_out; - - addr = pci_resource_start(pdev, epca_info_tbl[info_idx].bar_idx); - if (!addr) { - printk(KERN_ERR PFX "PCI region #%d not available (size 0)\n", - epca_info_tbl[info_idx].bar_idx); - goto err_out; - } - - boards[board_idx].status = ENABLED; - boards[board_idx].type = epca_info_tbl[info_idx].board_type; - boards[board_idx].numports = 0x0; - boards[board_idx].port = addr + PCI_IO_OFFSET; - boards[board_idx].membase = addr; - - if (!request_mem_region(addr + PCI_IO_OFFSET, 0x200000, "epca")) { - printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", - 0x200000, addr + PCI_IO_OFFSET); - goto err_out; - } - - boards[board_idx].re_map_port = ioremap_nocache(addr + PCI_IO_OFFSET, - 0x200000); - if (!boards[board_idx].re_map_port) { - printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", - 0x200000, addr + PCI_IO_OFFSET); - goto err_out_free_pciio; - } - - if (!request_mem_region(addr, 0x200000, "epca")) { - printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", - 0x200000, addr); - goto err_out_free_iounmap; - } - - boards[board_idx].re_map_membase = ioremap_nocache(addr, 0x200000); - if (!boards[board_idx].re_map_membase) { - printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", - 0x200000, addr + PCI_IO_OFFSET); - goto err_out_free_memregion; - } - - /* - * I don't know what the below does, but the hardware guys say its - * required on everything except PLX (In this case XRJ). - */ - if (info_idx != brd_xrj) { - pci_write_config_byte(pdev, 0x40, 0); - pci_write_config_byte(pdev, 0x46, 0); - } - - return 0; - -err_out_free_memregion: - release_mem_region(addr, 0x200000); -err_out_free_iounmap: - iounmap(boards[board_idx].re_map_port); -err_out_free_pciio: - release_mem_region(addr + PCI_IO_OFFSET, 0x200000); -err_out: - return -ENODEV; -} - - -static struct pci_device_id epca_pci_tbl[] = { - { PCI_VENDOR_DIGI, PCI_DEVICE_XR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xr }, - { PCI_VENDOR_DIGI, PCI_DEVICE_XEM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xem }, - { PCI_VENDOR_DIGI, PCI_DEVICE_CX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_cx }, - { PCI_VENDOR_DIGI, PCI_DEVICE_XRJ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xrj }, - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, epca_pci_tbl); - -static int __init init_PCI(void) -{ - memset(&epca_driver, 0, sizeof(epca_driver)); - epca_driver.name = "epca"; - epca_driver.id_table = epca_pci_tbl; - epca_driver.probe = epca_init_one; - - return pci_register_driver(&epca_driver); -} - -MODULE_LICENSE("GPL"); diff --git a/drivers/char/epca.h b/drivers/char/epca.h deleted file mode 100644 index d414bf2dbf7c..000000000000 --- a/drivers/char/epca.h +++ /dev/null @@ -1,158 +0,0 @@ -#define XEMPORTS 0xC02 -#define XEPORTS 0xC22 - -#define MAX_ALLOC 0x100 - -#define MAXBOARDS 12 -#define FEPCODESEG 0x0200L -#define FEPCODE 0x2000L -#define BIOSCODE 0xf800L - -#define MISCGLOBAL 0x0C00L -#define NPORT 0x0C22L -#define MBOX 0x0C40L -#define PORTBASE 0x0C90L - -/* Begin code defines used for epca_setup */ - -#define INVALID_BOARD_TYPE 0x1 -#define INVALID_NUM_PORTS 0x2 -#define INVALID_MEM_BASE 0x4 -#define INVALID_PORT_BASE 0x8 -#define INVALID_BOARD_STATUS 0x10 -#define INVALID_ALTPIN 0x20 - -/* End code defines used for epca_setup */ - - -#define FEPCLR 0x00 -#define FEPMEM 0x02 -#define FEPRST 0x04 -#define FEPINT 0x08 -#define FEPMASK 0x0e -#define FEPWIN 0x80 - -#define PCXE 0 -#define PCXEVE 1 -#define PCXEM 2 -#define EISAXEM 3 -#define PC64XE 4 -#define PCXI 5 -#define PCIXEM 7 -#define PCICX 8 -#define PCIXR 9 -#define PCIXRJ 10 -#define EPCA_NUM_TYPES 6 - - -static char *board_desc[] = -{ - "PC/Xe", - "PC/Xeve", - "PC/Xem", - "EISA/Xem", - "PC/64Xe", - "PC/Xi", - "unknown", - "PCI/Xem", - "PCI/CX", - "PCI/Xr", - "PCI/Xrj", -}; - -#define STARTC 021 -#define STOPC 023 -#define IAIXON 0x2000 - - -#define TXSTOPPED 0x1 -#define LOWWAIT 0x2 -#define EMPTYWAIT 0x4 -#define RXSTOPPED 0x8 -#define TXBUSY 0x10 - -#define DISABLED 0 -#define ENABLED 1 -#define OFF 0 -#define ON 1 - -#define FEPTIMEOUT 200000 -#define SERIAL_TYPE_INFO 3 -#define EPCA_EVENT_HANGUP 1 -#define EPCA_MAGIC 0x5c6df104L - -struct channel -{ - long magic; - struct tty_port port; - unsigned char boardnum; - unsigned char channelnum; - unsigned char omodem; /* FEP output modem status */ - unsigned char imodem; /* FEP input modem status */ - unsigned char modemfake; /* Modem values to be forced */ - unsigned char modem; /* Force values */ - unsigned char hflow; - unsigned char dsr; - unsigned char dcd; - unsigned char m_rts ; /* The bits used in whatever FEP */ - unsigned char m_dcd ; /* is indiginous to this board to */ - unsigned char m_dsr ; /* represent each of the physical */ - unsigned char m_cts ; /* handshake lines */ - unsigned char m_ri ; - unsigned char m_dtr ; - unsigned char stopc; - unsigned char startc; - unsigned char stopca; - unsigned char startca; - unsigned char fepstopc; - unsigned char fepstartc; - unsigned char fepstopca; - unsigned char fepstartca; - unsigned char txwin; - unsigned char rxwin; - unsigned short fepiflag; - unsigned short fepcflag; - unsigned short fepoflag; - unsigned short txbufhead; - unsigned short txbufsize; - unsigned short rxbufhead; - unsigned short rxbufsize; - int close_delay; - unsigned long event; - uint dev; - unsigned long statusflags; - unsigned long c_iflag; - unsigned long c_cflag; - unsigned long c_lflag; - unsigned long c_oflag; - unsigned char __iomem *txptr; - unsigned char __iomem *rxptr; - struct board_info *board; - struct board_chan __iomem *brdchan; - struct digi_struct digiext; - struct work_struct tqueue; - struct global_data __iomem *mailbox; -}; - -struct board_info -{ - unsigned char status; - unsigned char type; - unsigned char altpin; - unsigned short numports; - unsigned long port; - unsigned long membase; - void __iomem *re_map_port; - void __iomem *re_map_membase; - unsigned long memory_seg; - void ( * memwinon ) (struct board_info *, unsigned int) ; - void ( * memwinoff ) (struct board_info *, unsigned int) ; - void ( * globalwinon ) (struct channel *) ; - void ( * txwinon ) (struct channel *) ; - void ( * rxwinon ) (struct channel *) ; - void ( * memoff ) (struct channel *) ; - void ( * assertgwinon ) (struct channel *) ; - void ( * assertmemoff ) (struct channel *) ; - unsigned char poller_inhibited ; -}; - diff --git a/drivers/char/epcaconfig.h b/drivers/char/epcaconfig.h deleted file mode 100644 index 55dec067078e..000000000000 --- a/drivers/char/epcaconfig.h +++ /dev/null @@ -1,7 +0,0 @@ -#define NUMCARDS 0 -#define NBDEVS 0 - -struct board_info static_boards[NUMCARDS]={ -}; - -/* DO NOT HAND EDIT THIS FILE! */ diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile deleted file mode 100644 index 7b78e0dfc5b0..000000000000 --- a/drivers/char/ip2/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Computone IntelliPort Plus Driver -# - -obj-$(CONFIG_COMPUTONE) += ip2.o - -ip2-y := ip2main.o - diff --git a/drivers/char/ip2/i2cmd.c b/drivers/char/ip2/i2cmd.c deleted file mode 100644 index e7af647800b6..000000000000 --- a/drivers/char/ip2/i2cmd.c +++ /dev/null @@ -1,210 +0,0 @@ -/******************************************************************************* -* -* (c) 1998 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Definition table for In-line and Bypass commands. Applicable -* only when the standard loadware is active. (This is included -* source code, not a separate compilation module.) -* -*******************************************************************************/ - -//------------------------------------------------------------------------------ -// -// Revision History: -// -// 10 October 1991 MAG First Draft -// 7 November 1991 MAG Reflects additional commands. -// 24 February 1992 MAG Additional commands for 1.4.x loadware -// 11 March 1992 MAG Additional commands -// 30 March 1992 MAG Additional command: CMD_DSS_NOW -// 18 May 1992 MAG Discovered commands 39 & 40 must be at the end of a -// packet: affects implementation. -//------------------------------------------------------------------------------ - -//************ -//* Includes * -//************ - -#include "i2cmd.h" /* To get some bit-defines */ - -//------------------------------------------------------------------------------ -// Here is the table of global arrays which represent each type of command -// supported in the IntelliPort standard loadware. See also i2cmd.h -// for a more complete explanation of what is going on. -//------------------------------------------------------------------------------ - -// Here are the various globals: note that the names are not used except through -// the macros defined in i2cmd.h. Also note that although they are character -// arrays here (for extendability) they are cast to structure pointers in the -// i2cmd.h macros. See i2cmd.h for flags definitions. - -// Length Flags Command -static UCHAR ct02[] = { 1, BTH, 0x02 }; // DTR UP -static UCHAR ct03[] = { 1, BTH, 0x03 }; // DTR DN -static UCHAR ct04[] = { 1, BTH, 0x04 }; // RTS UP -static UCHAR ct05[] = { 1, BTH, 0x05 }; // RTS DN -static UCHAR ct06[] = { 1, BYP, 0x06 }; // START FL -static UCHAR ct07[] = { 2, BTH, 0x07,0 }; // BAUD -static UCHAR ct08[] = { 2, BTH, 0x08,0 }; // BITS -static UCHAR ct09[] = { 2, BTH, 0x09,0 }; // STOP -static UCHAR ct10[] = { 2, BTH, 0x0A,0 }; // PARITY -static UCHAR ct11[] = { 2, BTH, 0x0B,0 }; // XON -static UCHAR ct12[] = { 2, BTH, 0x0C,0 }; // XOFF -static UCHAR ct13[] = { 1, BTH, 0x0D }; // STOP FL -static UCHAR ct14[] = { 1, BYP|VIP, 0x0E }; // ACK HOTK -//static UCHAR ct15[]={ 2, BTH|VIP, 0x0F,0 }; // IRQ SET -static UCHAR ct16[] = { 2, INL, 0x10,0 }; // IXONOPTS -static UCHAR ct17[] = { 2, INL, 0x11,0 }; // OXONOPTS -static UCHAR ct18[] = { 1, INL, 0x12 }; // CTSENAB -static UCHAR ct19[] = { 1, BTH, 0x13 }; // CTSDSAB -static UCHAR ct20[] = { 1, INL, 0x14 }; // DCDENAB -static UCHAR ct21[] = { 1, BTH, 0x15 }; // DCDDSAB -static UCHAR ct22[] = { 1, BTH, 0x16 }; // DSRENAB -static UCHAR ct23[] = { 1, BTH, 0x17 }; // DSRDSAB -static UCHAR ct24[] = { 1, BTH, 0x18 }; // RIENAB -static UCHAR ct25[] = { 1, BTH, 0x19 }; // RIDSAB -static UCHAR ct26[] = { 2, BTH, 0x1A,0 }; // BRKENAB -static UCHAR ct27[] = { 1, BTH, 0x1B }; // BRKDSAB -//static UCHAR ct28[]={ 2, BTH, 0x1C,0 }; // MAXBLOKSIZE -//static UCHAR ct29[]={ 2, 0, 0x1D,0 }; // reserved -static UCHAR ct30[] = { 1, INL, 0x1E }; // CTSFLOWENAB -static UCHAR ct31[] = { 1, INL, 0x1F }; // CTSFLOWDSAB -static UCHAR ct32[] = { 1, INL, 0x20 }; // RTSFLOWENAB -static UCHAR ct33[] = { 1, INL, 0x21 }; // RTSFLOWDSAB -static UCHAR ct34[] = { 2, BTH, 0x22,0 }; // ISTRIPMODE -static UCHAR ct35[] = { 2, BTH|END, 0x23,0 }; // SENDBREAK -static UCHAR ct36[] = { 2, BTH, 0x24,0 }; // SETERRMODE -//static UCHAR ct36a[]={ 3, INL, 0x24,0,0 }; // SET_REPLACE - -// The following is listed for completeness, but should never be sent directly -// by user-level code. It is sent only by library routines in response to data -// movement. -//static UCHAR ct37[]={ 5, BYP|VIP, 0x25,0,0,0,0 }; // FLOW PACKET - -// Back to normal -//static UCHAR ct38[] = {11, BTH|VAR, 0x26,0,0,0,0,0,0,0,0,0,0 }; // DEF KEY SEQ -//static UCHAR ct39[]={ 3, BTH|END, 0x27,0,0 }; // OPOSTON -//static UCHAR ct40[]={ 1, BTH|END, 0x28 }; // OPOSTOFF -static UCHAR ct41[] = { 1, BYP, 0x29 }; // RESUME -//static UCHAR ct42[]={ 2, BTH, 0x2A,0 }; // TXBAUD -//static UCHAR ct43[]={ 2, BTH, 0x2B,0 }; // RXBAUD -//static UCHAR ct44[]={ 2, BTH, 0x2C,0 }; // MS PING -//static UCHAR ct45[]={ 1, BTH, 0x2D }; // HOTENAB -//static UCHAR ct46[]={ 1, BTH, 0x2E }; // HOTDSAB -//static UCHAR ct47[]={ 7, BTH, 0x2F,0,0,0,0,0,0 }; // UNIX FLAGS -//static UCHAR ct48[]={ 1, BTH, 0x30 }; // DSRFLOWENAB -//static UCHAR ct49[]={ 1, BTH, 0x31 }; // DSRFLOWDSAB -//static UCHAR ct50[]={ 1, BTH, 0x32 }; // DTRFLOWENAB -//static UCHAR ct51[]={ 1, BTH, 0x33 }; // DTRFLOWDSAB -//static UCHAR ct52[]={ 1, BTH, 0x34 }; // BAUDTABRESET -//static UCHAR ct53[] = { 3, BTH, 0x35,0,0 }; // BAUDREMAP -static UCHAR ct54[] = { 3, BTH, 0x36,0,0 }; // CUSTOMBAUD1 -static UCHAR ct55[] = { 3, BTH, 0x37,0,0 }; // CUSTOMBAUD2 -static UCHAR ct56[] = { 2, BTH|END, 0x38,0 }; // PAUSE -static UCHAR ct57[] = { 1, BYP, 0x39 }; // SUSPEND -static UCHAR ct58[] = { 1, BYP, 0x3A }; // UNSUSPEND -static UCHAR ct59[] = { 2, BTH, 0x3B,0 }; // PARITYCHK -static UCHAR ct60[] = { 1, INL|VIP, 0x3C }; // BOOKMARKREQ -//static UCHAR ct61[]={ 2, BTH, 0x3D,0 }; // INTERNALLOOP -//static UCHAR ct62[]={ 2, BTH, 0x3E,0 }; // HOTKTIMEOUT -static UCHAR ct63[] = { 2, INL, 0x3F,0 }; // SETTXON -static UCHAR ct64[] = { 2, INL, 0x40,0 }; // SETTXOFF -//static UCHAR ct65[]={ 2, BTH, 0x41,0 }; // SETAUTORTS -//static UCHAR ct66[]={ 2, BTH, 0x42,0 }; // SETHIGHWAT -//static UCHAR ct67[]={ 2, BYP, 0x43,0 }; // STARTSELFL -//static UCHAR ct68[]={ 2, INL, 0x44,0 }; // ENDSELFL -//static UCHAR ct69[]={ 1, BYP, 0x45 }; // HWFLOW_OFF -//static UCHAR ct70[]={ 1, BTH, 0x46 }; // ODSRFL_ENAB -//static UCHAR ct71[]={ 1, BTH, 0x47 }; // ODSRFL_DSAB -//static UCHAR ct72[]={ 1, BTH, 0x48 }; // ODCDFL_ENAB -//static UCHAR ct73[]={ 1, BTH, 0x49 }; // ODCDFL_DSAB -//static UCHAR ct74[]={ 2, BTH, 0x4A,0 }; // LOADLEVEL -//static UCHAR ct75[]={ 2, BTH, 0x4B,0 }; // STATDATA -//static UCHAR ct76[]={ 1, BYP, 0x4C }; // BREAK_ON -//static UCHAR ct77[]={ 1, BYP, 0x4D }; // BREAK_OFF -//static UCHAR ct78[]={ 1, BYP, 0x4E }; // GETFC -static UCHAR ct79[] = { 2, BYP, 0x4F,0 }; // XMIT_NOW -//static UCHAR ct80[]={ 4, BTH, 0x50,0,0,0 }; // DIVISOR_LATCH -//static UCHAR ct81[]={ 1, BYP, 0x51 }; // GET_STATUS -//static UCHAR ct82[]={ 1, BYP, 0x52 }; // GET_TXCNT -//static UCHAR ct83[]={ 1, BYP, 0x53 }; // GET_RXCNT -//static UCHAR ct84[]={ 1, BYP, 0x54 }; // GET_BOXIDS -//static UCHAR ct85[]={10, BYP, 0x55,0,0,0,0,0,0,0,0,0 }; // ENAB_MULT -//static UCHAR ct86[]={ 2, BTH, 0x56,0 }; // RCV_ENABLE -static UCHAR ct87[] = { 1, BYP, 0x57 }; // HW_TEST -//static UCHAR ct88[]={ 3, BTH, 0x58,0,0 }; // RCV_THRESHOLD -//static UCHAR ct90[]={ 3, BYP, 0x5A,0,0 }; // Set SILO -//static UCHAR ct91[]={ 2, BYP, 0x5B,0 }; // timed break - -// Some composite commands as well -//static UCHAR cc01[]={ 2, BTH, 0x02,0x04 }; // DTR & RTS UP -//static UCHAR cc02[]={ 2, BTH, 0x03,0x05 }; // DTR & RTS DN - -//******** -//* Code * -//******** - -//****************************************************************************** -// Function: i2cmdUnixFlags(iflag, cflag, lflag) -// Parameters: Unix tty flags -// -// Returns: Pointer to command structure -// -// Description: -// -// This routine sets the parameters of command 47 and returns a pointer to the -// appropriate structure. -//****************************************************************************** -#if 0 -cmdSyntaxPtr -i2cmdUnixFlags(unsigned short iflag,unsigned short cflag,unsigned short lflag) -{ - cmdSyntaxPtr pCM = (cmdSyntaxPtr) ct47; - - pCM->cmd[1] = (unsigned char) iflag; - pCM->cmd[2] = (unsigned char) (iflag >> 8); - pCM->cmd[3] = (unsigned char) cflag; - pCM->cmd[4] = (unsigned char) (cflag >> 8); - pCM->cmd[5] = (unsigned char) lflag; - pCM->cmd[6] = (unsigned char) (lflag >> 8); - return pCM; -} -#endif /* 0 */ - -//****************************************************************************** -// Function: i2cmdBaudDef(which, rate) -// Parameters: ? -// -// Returns: Pointer to command structure -// -// Description: -// -// This routine sets the parameters of commands 54 or 55 (according to the -// argument which), and returns a pointer to the appropriate structure. -//****************************************************************************** -static cmdSyntaxPtr -i2cmdBaudDef(int which, unsigned short rate) -{ - cmdSyntaxPtr pCM; - - switch(which) - { - case 1: - pCM = (cmdSyntaxPtr) ct54; - break; - default: - case 2: - pCM = (cmdSyntaxPtr) ct55; - break; - } - pCM->cmd[1] = (unsigned char) rate; - pCM->cmd[2] = (unsigned char) (rate >> 8); - return pCM; -} - diff --git a/drivers/char/ip2/i2cmd.h b/drivers/char/ip2/i2cmd.h deleted file mode 100644 index 29277ec6b8ed..000000000000 --- a/drivers/char/ip2/i2cmd.h +++ /dev/null @@ -1,630 +0,0 @@ -/******************************************************************************* -* -* (c) 1999 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Definitions and support for In-line and Bypass commands. -* Applicable only when the standard loadware is active. -* -*******************************************************************************/ -//------------------------------------------------------------------------------ -// Revision History: -// -// 10 October 1991 MAG First Draft -// 7 November 1991 MAG Reflects some new commands -// 20 February 1992 MAG CMD_HOTACK corrected: no argument. -// 24 February 1992 MAG Support added for new commands for 1.4.x loadware. -// 11 March 1992 MAG Additional commands. -// 16 March 1992 MAG Additional commands. -// 30 March 1992 MAG Additional command: CMD_DSS_NOW -// 18 May 1992 MAG Changed CMD_OPOST -// -//------------------------------------------------------------------------------ -#ifndef I2CMD_H // To prevent multiple includes -#define I2CMD_H 1 - -#include "ip2types.h" - -// This module is designed to provide a uniform method of sending commands to -// the board through command packets. The difficulty is, some commands take -// parameters, others do not. Furthermore, it is often useful to send several -// commands to the same channel as part of the same packet. (See also i2pack.h.) -// -// This module is designed so that the caller should not be responsible for -// remembering the exact syntax of each command, or at least so that the -// compiler could check things somewhat. I'll explain as we go... -// -// First, a structure which can embody the syntax of each type of command. -// -typedef struct _cmdSyntax -{ - UCHAR length; // Number of bytes in the command - UCHAR flags; // Information about the command (see below) - - // The command and its parameters, which may be of arbitrary length. Don't - // worry yet how the parameters will be initialized; macros later take care - // of it. Also, don't worry about the arbitrary length issue; this structure - // is never used to allocate space (see i2cmd.c). - UCHAR cmd[2]; -} cmdSyntax, *cmdSyntaxPtr; - -// Bit assignments for flags - -#define INL 1 // Set if suitable for inline commands -#define BYP 2 // Set if suitable for bypass commands -#define BTH (INL|BYP) // suitable for either! -#define END 4 // Set if this must be the last command in a block -#define VIP 8 // Set if this command is special in some way and really - // should only be sent from the library-level and not - // directly from user-level -#define VAR 0x10 // This command is of variable length! - -// Declarations for the global arrays used to bear the commands and their -// arguments. -// -// Note: Since these are globals and the arguments might change, it is important -// that the library routine COPY these into buffers from whence they would be -// sent, rather than merely storing the pointers. In multi-threaded -// environments, important that the copy should obtain before any context switch -// is allowed. Also, for parameterized commands, DO NOT ISSUE THE SAME COMMAND -// MORE THAN ONCE WITH THE SAME PARAMETERS in the same call. -// -static UCHAR ct02[]; -static UCHAR ct03[]; -static UCHAR ct04[]; -static UCHAR ct05[]; -static UCHAR ct06[]; -static UCHAR ct07[]; -static UCHAR ct08[]; -static UCHAR ct09[]; -static UCHAR ct10[]; -static UCHAR ct11[]; -static UCHAR ct12[]; -static UCHAR ct13[]; -static UCHAR ct14[]; -static UCHAR ct15[]; -static UCHAR ct16[]; -static UCHAR ct17[]; -static UCHAR ct18[]; -static UCHAR ct19[]; -static UCHAR ct20[]; -static UCHAR ct21[]; -static UCHAR ct22[]; -static UCHAR ct23[]; -static UCHAR ct24[]; -static UCHAR ct25[]; -static UCHAR ct26[]; -static UCHAR ct27[]; -static UCHAR ct28[]; -static UCHAR ct29[]; -static UCHAR ct30[]; -static UCHAR ct31[]; -static UCHAR ct32[]; -static UCHAR ct33[]; -static UCHAR ct34[]; -static UCHAR ct35[]; -static UCHAR ct36[]; -static UCHAR ct36a[]; -static UCHAR ct41[]; -static UCHAR ct42[]; -static UCHAR ct43[]; -static UCHAR ct44[]; -static UCHAR ct45[]; -static UCHAR ct46[]; -static UCHAR ct48[]; -static UCHAR ct49[]; -static UCHAR ct50[]; -static UCHAR ct51[]; -static UCHAR ct52[]; -static UCHAR ct56[]; -static UCHAR ct57[]; -static UCHAR ct58[]; -static UCHAR ct59[]; -static UCHAR ct60[]; -static UCHAR ct61[]; -static UCHAR ct62[]; -static UCHAR ct63[]; -static UCHAR ct64[]; -static UCHAR ct65[]; -static UCHAR ct66[]; -static UCHAR ct67[]; -static UCHAR ct68[]; -static UCHAR ct69[]; -static UCHAR ct70[]; -static UCHAR ct71[]; -static UCHAR ct72[]; -static UCHAR ct73[]; -static UCHAR ct74[]; -static UCHAR ct75[]; -static UCHAR ct76[]; -static UCHAR ct77[]; -static UCHAR ct78[]; -static UCHAR ct79[]; -static UCHAR ct80[]; -static UCHAR ct81[]; -static UCHAR ct82[]; -static UCHAR ct83[]; -static UCHAR ct84[]; -static UCHAR ct85[]; -static UCHAR ct86[]; -static UCHAR ct87[]; -static UCHAR ct88[]; -static UCHAR ct89[]; -static UCHAR ct90[]; -static UCHAR ct91[]; -static UCHAR cc01[]; -static UCHAR cc02[]; - -// Now, refer to i2cmd.c, and see the character arrays defined there. They are -// cast here to cmdSyntaxPtr. -// -// There are library functions for issuing bypass or inline commands. These -// functions take one or more arguments of the type cmdSyntaxPtr. The routine -// then can figure out how long each command is supposed to be and easily add it -// to the list. -// -// For ease of use, we define manifests which return pointers to appropriate -// cmdSyntaxPtr things. But some commands also take arguments. If a single -// argument is used, we define a macro which performs the single assignment and -// (through the expedient of a comma expression) references the appropriate -// pointer. For commands requiring several arguments, we actually define a -// function to perform the assignments. - -#define CMD_DTRUP (cmdSyntaxPtr)(ct02) // Raise DTR -#define CMD_DTRDN (cmdSyntaxPtr)(ct03) // Lower DTR -#define CMD_RTSUP (cmdSyntaxPtr)(ct04) // Raise RTS -#define CMD_RTSDN (cmdSyntaxPtr)(ct05) // Lower RTS -#define CMD_STARTFL (cmdSyntaxPtr)(ct06) // Start Flushing Data - -#define CMD_DTRRTS_UP (cmdSyntaxPtr)(cc01) // Raise DTR and RTS -#define CMD_DTRRTS_DN (cmdSyntaxPtr)(cc02) // Lower DTR and RTS - -// Set Baud Rate for transmit and receive -#define CMD_SETBAUD(arg) \ - (((cmdSyntaxPtr)(ct07))->cmd[1] = (arg),(cmdSyntaxPtr)(ct07)) - -#define CBR_50 1 -#define CBR_75 2 -#define CBR_110 3 -#define CBR_134 4 -#define CBR_150 5 -#define CBR_200 6 -#define CBR_300 7 -#define CBR_600 8 -#define CBR_1200 9 -#define CBR_1800 10 -#define CBR_2400 11 -#define CBR_4800 12 -#define CBR_9600 13 -#define CBR_19200 14 -#define CBR_38400 15 -#define CBR_2000 16 -#define CBR_3600 17 -#define CBR_7200 18 -#define CBR_56000 19 -#define CBR_57600 20 -#define CBR_64000 21 -#define CBR_76800 22 -#define CBR_115200 23 -#define CBR_C1 24 // Custom baud rate 1 -#define CBR_C2 25 // Custom baud rate 2 -#define CBR_153600 26 -#define CBR_230400 27 -#define CBR_307200 28 -#define CBR_460800 29 -#define CBR_921600 30 - -// Set Character size -// -#define CMD_SETBITS(arg) \ - (((cmdSyntaxPtr)(ct08))->cmd[1] = (arg),(cmdSyntaxPtr)(ct08)) - -#define CSZ_5 0 -#define CSZ_6 1 -#define CSZ_7 2 -#define CSZ_8 3 - -// Set number of stop bits -// -#define CMD_SETSTOP(arg) \ - (((cmdSyntaxPtr)(ct09))->cmd[1] = (arg),(cmdSyntaxPtr)(ct09)) - -#define CST_1 0 -#define CST_15 1 // 1.5 stop bits -#define CST_2 2 - -// Set parity option -// -#define CMD_SETPAR(arg) \ - (((cmdSyntaxPtr)(ct10))->cmd[1] = (arg),(cmdSyntaxPtr)(ct10)) - -#define CSP_NP 0 // no parity -#define CSP_OD 1 // odd parity -#define CSP_EV 2 // Even parity -#define CSP_SP 3 // Space parity -#define CSP_MK 4 // Mark parity - -// Define xon char for transmitter flow control -// -#define CMD_DEF_IXON(arg) \ - (((cmdSyntaxPtr)(ct11))->cmd[1] = (arg),(cmdSyntaxPtr)(ct11)) - -// Define xoff char for transmitter flow control -// -#define CMD_DEF_IXOFF(arg) \ - (((cmdSyntaxPtr)(ct12))->cmd[1] = (arg),(cmdSyntaxPtr)(ct12)) - -#define CMD_STOPFL (cmdSyntaxPtr)(ct13) // Stop Flushing data - -// Acknowledge receipt of hotkey signal -// -#define CMD_HOTACK (cmdSyntaxPtr)(ct14) - -// Define irq level to use. Should actually be sent by library-level code, not -// directly from user... -// -#define CMDVALUE_IRQ 15 // For library use at initialization. Until this command - // is sent, board processing doesn't really start. -#define CMD_SET_IRQ(arg) \ - (((cmdSyntaxPtr)(ct15))->cmd[1] = (arg),(cmdSyntaxPtr)(ct15)) - -#define CIR_POLL 0 // No IRQ - Poll -#define CIR_3 3 // IRQ 3 -#define CIR_4 4 // IRQ 4 -#define CIR_5 5 // IRQ 5 -#define CIR_7 7 // IRQ 7 -#define CIR_10 10 // IRQ 10 -#define CIR_11 11 // IRQ 11 -#define CIR_12 12 // IRQ 12 -#define CIR_15 15 // IRQ 15 - -// Select transmit flow xon/xoff options -// -#define CMD_IXON_OPT(arg) \ - (((cmdSyntaxPtr)(ct16))->cmd[1] = (arg),(cmdSyntaxPtr)(ct16)) - -#define CIX_NONE 0 // Incoming Xon/Xoff characters not special -#define CIX_XON 1 // Xoff disable, Xon enable -#define CIX_XANY 2 // Xoff disable, any key enable - -// Select receive flow xon/xoff options -// -#define CMD_OXON_OPT(arg) \ - (((cmdSyntaxPtr)(ct17))->cmd[1] = (arg),(cmdSyntaxPtr)(ct17)) - -#define COX_NONE 0 // Don't send Xon/Xoff -#define COX_XON 1 // Send xon/xoff to start/stop incoming data - - -#define CMD_CTS_REP (cmdSyntaxPtr)(ct18) // Enable CTS reporting -#define CMD_CTS_NREP (cmdSyntaxPtr)(ct19) // Disable CTS reporting - -#define CMD_DCD_REP (cmdSyntaxPtr)(ct20) // Enable DCD reporting -#define CMD_DCD_NREP (cmdSyntaxPtr)(ct21) // Disable DCD reporting - -#define CMD_DSR_REP (cmdSyntaxPtr)(ct22) // Enable DSR reporting -#define CMD_DSR_NREP (cmdSyntaxPtr)(ct23) // Disable DSR reporting - -#define CMD_RI_REP (cmdSyntaxPtr)(ct24) // Enable RI reporting -#define CMD_RI_NREP (cmdSyntaxPtr)(ct25) // Disable RI reporting - -// Enable break reporting and select style -// -#define CMD_BRK_REP(arg) \ - (((cmdSyntaxPtr)(ct26))->cmd[1] = (arg),(cmdSyntaxPtr)(ct26)) - -#define CBK_STAT 0x00 // Report breaks as a status (exception,irq) -#define CBK_NULL 0x01 // Report breaks as a good null -#define CBK_STAT_SEQ 0x02 // Report breaks as a status AND as in-band character - // sequence FFh, 01h, 10h -#define CBK_SEQ 0x03 // Report breaks as the in-band - //sequence FFh, 01h, 10h ONLY. -#define CBK_FLSH 0x04 // if this bit set also flush input data -#define CBK_POSIX 0x08 // if this bit set report as FF,0,0 sequence -#define CBK_SINGLE 0x10 // if this bit set with CBK_SEQ or CBK_STAT_SEQ - //then reports single null instead of triple - -#define CMD_BRK_NREP (cmdSyntaxPtr)(ct27) // Disable break reporting - -// Specify maximum block size for received data -// -#define CMD_MAX_BLOCK(arg) \ - (((cmdSyntaxPtr)(ct28))->cmd[1] = (arg),(cmdSyntaxPtr)(ct28)) - -// -- COMMAND 29 is reserved -- - -#define CMD_CTSFL_ENAB (cmdSyntaxPtr)(ct30) // Enable CTS flow control -#define CMD_CTSFL_DSAB (cmdSyntaxPtr)(ct31) // Disable CTS flow control -#define CMD_RTSFL_ENAB (cmdSyntaxPtr)(ct32) // Enable RTS flow control -#define CMD_RTSFL_DSAB (cmdSyntaxPtr)(ct33) // Disable RTS flow control - -// Specify istrip option -// -#define CMD_ISTRIP_OPT(arg) \ - (((cmdSyntaxPtr)(ct34))->cmd[1] = (arg),(cmdSyntaxPtr)(ct34)) - -#define CIS_NOSTRIP 0 // Strip characters to character size -#define CIS_STRIP 1 // Strip any 8-bit characters to 7 bits - -// Send a break of arg milliseconds -// -#define CMD_SEND_BRK(arg) \ - (((cmdSyntaxPtr)(ct35))->cmd[1] = (arg),(cmdSyntaxPtr)(ct35)) - -// Set error reporting mode -// -#define CMD_SET_ERROR(arg) \ - (((cmdSyntaxPtr)(ct36))->cmd[1] = (arg),(cmdSyntaxPtr)(ct36)) - -#define CSE_ESTAT 0 // Report error in a status packet -#define CSE_NOREP 1 // Treat character as though it were good -#define CSE_DROP 2 // Discard the character -#define CSE_NULL 3 // Replace with a null -#define CSE_MARK 4 // Replace with a 3-character sequence (as Unix) - -#define CSE_REPLACE 0x8 // Replace the errored character with the - // replacement character defined here - -#define CSE_STAT_REPLACE 0x18 // Replace the errored character with the - // replacement character defined here AND - // report the error as a status packet (as in - // CSE_ESTAT). - - -// COMMAND 37, to send flow control packets, is handled only by low-level -// library code in response to data movement and shouldn't ever be sent by the -// user code. See i2pack.h and the body of i2lib.c for details. - -// Enable on-board post-processing, using options given in oflag argument. -// Formerly, this command was automatically preceded by a CMD_OPOST_OFF command -// because the loadware does not permit sending back-to-back CMD_OPOST_ON -// commands without an intervening CMD_OPOST_OFF. BUT, WE LEARN 18 MAY 92, that -// CMD_OPOST_ON and CMD_OPOST_OFF must each be at the end of a packet (or in a -// solo packet). This means the caller must specify separately CMD_OPOST_OFF, -// CMD_OPOST_ON(parm) when he calls i2QueueCommands(). That function will ensure -// each gets a separate packet. Extra CMD_OPOST_OFF's are always ok. -// -#define CMD_OPOST_ON(oflag) \ - (*(USHORT *)(((cmdSyntaxPtr)(ct39))->cmd[1]) = (oflag), \ - (cmdSyntaxPtr)(ct39)) - -#define CMD_OPOST_OFF (cmdSyntaxPtr)(ct40) // Disable on-board post-proc - -#define CMD_RESUME (cmdSyntaxPtr)(ct41) // Resume: behave as though an XON - // were received; - -// Set Transmit baud rate (see command 7 for arguments) -// -#define CMD_SETBAUD_TX(arg) \ - (((cmdSyntaxPtr)(ct42))->cmd[1] = (arg),(cmdSyntaxPtr)(ct42)) - -// Set Receive baud rate (see command 7 for arguments) -// -#define CMD_SETBAUD_RX(arg) \ - (((cmdSyntaxPtr)(ct43))->cmd[1] = (arg),(cmdSyntaxPtr)(ct43)) - -// Request interrupt from board each arg milliseconds. Interrupt will specify -// "received data", even though there may be no data present. If arg == 0, -// disables any such interrupts. -// -#define CMD_PING_REQ(arg) \ - (((cmdSyntaxPtr)(ct44))->cmd[1] = (arg),(cmdSyntaxPtr)(ct44)) - -#define CMD_HOT_ENAB (cmdSyntaxPtr)(ct45) // Enable Hot-key checking -#define CMD_HOT_DSAB (cmdSyntaxPtr)(ct46) // Disable Hot-key checking - -#if 0 -// COMMAND 47: Send Protocol info via Unix flags: -// iflag = Unix tty t_iflag -// cflag = Unix tty t_cflag -// lflag = Unix tty t_lflag -// See System V Unix/Xenix documentation for the meanings of the bit fields -// within these flags -// -#define CMD_UNIX_FLAGS(iflag,cflag,lflag) i2cmdUnixFlags(iflag,cflag,lflag) -#endif /* 0 */ - -#define CMD_DSRFL_ENAB (cmdSyntaxPtr)(ct48) // Enable DSR receiver ctrl -#define CMD_DSRFL_DSAB (cmdSyntaxPtr)(ct49) // Disable DSR receiver ctrl -#define CMD_DTRFL_ENAB (cmdSyntaxPtr)(ct50) // Enable DTR flow control -#define CMD_DTRFL_DSAB (cmdSyntaxPtr)(ct51) // Disable DTR flow control -#define CMD_BAUD_RESET (cmdSyntaxPtr)(ct52) // Reset baudrate table - -// COMMAND 54: Define custom rate #1 -// rate = (short) 1/10 of the desired baud rate -// -#define CMD_BAUD_DEF1(rate) i2cmdBaudDef(1,rate) - -// COMMAND 55: Define custom rate #2 -// rate = (short) 1/10 of the desired baud rate -// -#define CMD_BAUD_DEF2(rate) i2cmdBaudDef(2,rate) - -// Pause arg hundredths of seconds. (Note, this is NOT milliseconds.) -// -#define CMD_PAUSE(arg) \ - (((cmdSyntaxPtr)(ct56))->cmd[1] = (arg),(cmdSyntaxPtr)(ct56)) - -#define CMD_SUSPEND (cmdSyntaxPtr)(ct57) // Suspend output -#define CMD_UNSUSPEND (cmdSyntaxPtr)(ct58) // Un-Suspend output - -// Set parity-checking options -// -#define CMD_PARCHK(arg) \ - (((cmdSyntaxPtr)(ct59))->cmd[1] = (arg),(cmdSyntaxPtr)(ct59)) - -#define CPK_ENAB 0 // Enable parity checking on input -#define CPK_DSAB 1 // Disable parity checking on input - -#define CMD_BMARK_REQ (cmdSyntaxPtr)(ct60) // Bookmark request - - -// Enable/Disable internal loopback mode -// -#define CMD_INLOOP(arg) \ - (((cmdSyntaxPtr)(ct61))->cmd[1] = (arg),(cmdSyntaxPtr)(ct61)) - -#define CIN_DISABLE 0 // Normal operation (default) -#define CIN_ENABLE 1 // Internal (local) loopback -#define CIN_REMOTE 2 // Remote loopback - -// Specify timeout for hotkeys: Delay will be (arg x 10) milliseconds, arg == 0 -// --> no timeout: wait forever. -// -#define CMD_HOT_TIME(arg) \ - (((cmdSyntaxPtr)(ct62))->cmd[1] = (arg),(cmdSyntaxPtr)(ct62)) - - -// Define (outgoing) xon for receive flow control -// -#define CMD_DEF_OXON(arg) \ - (((cmdSyntaxPtr)(ct63))->cmd[1] = (arg),(cmdSyntaxPtr)(ct63)) - -// Define (outgoing) xoff for receiver flow control -// -#define CMD_DEF_OXOFF(arg) \ - (((cmdSyntaxPtr)(ct64))->cmd[1] = (arg),(cmdSyntaxPtr)(ct64)) - -// Enable/Disable RTS on transmit (1/2 duplex-style) -// -#define CMD_RTS_XMIT(arg) \ - (((cmdSyntaxPtr)(ct65))->cmd[1] = (arg),(cmdSyntaxPtr)(ct65)) - -#define CHD_DISABLE 0 -#define CHD_ENABLE 1 - -// Set high-water-mark level (debugging use only) -// -#define CMD_SETHIGHWAT(arg) \ - (((cmdSyntaxPtr)(ct66))->cmd[1] = (arg),(cmdSyntaxPtr)(ct66)) - -// Start flushing tagged data (tag = 0-14) -// -#define CMD_START_SELFL(tag) \ - (((cmdSyntaxPtr)(ct67))->cmd[1] = (tag),(cmdSyntaxPtr)(ct67)) - -// End flushing tagged data (tag = 0-14) -// -#define CMD_END_SELFL(tag) \ - (((cmdSyntaxPtr)(ct68))->cmd[1] = (tag),(cmdSyntaxPtr)(ct68)) - -#define CMD_HWFLOW_OFF (cmdSyntaxPtr)(ct69) // Disable HW TX flow control -#define CMD_ODSRFL_ENAB (cmdSyntaxPtr)(ct70) // Enable DSR output f/c -#define CMD_ODSRFL_DSAB (cmdSyntaxPtr)(ct71) // Disable DSR output f/c -#define CMD_ODCDFL_ENAB (cmdSyntaxPtr)(ct72) // Enable DCD output f/c -#define CMD_ODCDFL_DSAB (cmdSyntaxPtr)(ct73) // Disable DCD output f/c - -// Set transmit interrupt load level. Count should be an even value 2-12 -// -#define CMD_LOADLEVEL(count) \ - (((cmdSyntaxPtr)(ct74))->cmd[1] = (count),(cmdSyntaxPtr)(ct74)) - -// If reporting DSS changes, map to character sequence FFh, 2, MSR -// -#define CMD_STATDATA(arg) \ - (((cmdSyntaxPtr)(ct75))->cmd[1] = (arg),(cmdSyntaxPtr)(ct75)) - -#define CSTD_DISABLE// Report DSS changes as status packets only (default) -#define CSTD_ENABLE // Report DSS changes as in-band data sequence as well as - // by status packet. - -#define CMD_BREAK_ON (cmdSyntaxPtr)(ct76)// Set break and stop xmit -#define CMD_BREAK_OFF (cmdSyntaxPtr)(ct77)// End break and restart xmit -#define CMD_GETFC (cmdSyntaxPtr)(ct78)// Request for flow control packet - // from board. - -// Transmit this character immediately -// -#define CMD_XMIT_NOW(ch) \ - (((cmdSyntaxPtr)(ct79))->cmd[1] = (ch),(cmdSyntaxPtr)(ct79)) - -// Set baud rate via "divisor latch" -// -#define CMD_DIVISOR_LATCH(which,value) \ - (((cmdSyntaxPtr)(ct80))->cmd[1] = (which), \ - *(USHORT *)(((cmdSyntaxPtr)(ct80))->cmd[2]) = (value), \ - (cmdSyntaxPtr)(ct80)) - -#define CDL_RX 1 // Set receiver rate -#define CDL_TX 2 // Set transmit rate - // (CDL_TX | CDL_RX) Set both rates - -// Request for special diagnostic status pkt from the board. -// -#define CMD_GET_STATUS (cmdSyntaxPtr)(ct81) - -// Request time-stamped transmit character count packet. -// -#define CMD_GET_TXCNT (cmdSyntaxPtr)(ct82) - -// Request time-stamped receive character count packet. -// -#define CMD_GET_RXCNT (cmdSyntaxPtr)(ct83) - -// Request for box/board I.D. packet. -#define CMD_GET_BOXIDS (cmdSyntaxPtr)(ct84) - -// Enable or disable multiple channels according to bit-mapped ushorts box 1-4 -// -#define CMD_ENAB_MULT(enable, box1, box2, box3, box4) \ - (((cmdSytaxPtr)(ct85))->cmd[1] = (enable), \ - *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[2]) = (box1), \ - *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[4]) = (box2), \ - *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[6]) = (box3), \ - *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[8]) = (box4), \ - (cmdSyntaxPtr)(ct85)) - -#define CEM_DISABLE 0 -#define CEM_ENABLE 1 - -// Enable or disable receiver or receiver interrupts (default both enabled) -// -#define CMD_RCV_ENABLE(ch) \ - (((cmdSyntaxPtr)(ct86))->cmd[1] = (ch),(cmdSyntaxPtr)(ct86)) - -#define CRE_OFF 0 // Disable the receiver -#define CRE_ON 1 // Enable the receiver -#define CRE_INTOFF 2 // Disable receiver interrupts (to loadware) -#define CRE_INTON 3 // Enable receiver interrupts (to loadware) - -// Starts up a hardware test process, which runs transparently, and sends a -// STAT_HWFAIL packet in case a hardware failure is detected. -// -#define CMD_HW_TEST (cmdSyntaxPtr)(ct87) - -// Change receiver threshold and timeout value: -// Defaults: timeout = 20mS -// threshold count = 8 when DTRflow not in use, -// threshold count = 5 when DTRflow in use. -// -#define CMD_RCV_THRESHOLD(count,ms) \ - (((cmdSyntaxPtr)(ct88))->cmd[1] = (count), \ - ((cmdSyntaxPtr)(ct88))->cmd[2] = (ms), \ - (cmdSyntaxPtr)(ct88)) - -// Makes the loadware report DSS signals for this channel immediately. -// -#define CMD_DSS_NOW (cmdSyntaxPtr)(ct89) - -// Set the receive silo parameters -// timeout is ms idle wait until delivery (~VTIME) -// threshold is max characters cause interrupt (~VMIN) -// -#define CMD_SET_SILO(timeout,threshold) \ - (((cmdSyntaxPtr)(ct90))->cmd[1] = (timeout), \ - ((cmdSyntaxPtr)(ct90))->cmd[2] = (threshold), \ - (cmdSyntaxPtr)(ct90)) - -// Set timed break in decisecond (1/10s) -// -#define CMD_LBREAK(ds) \ - (((cmdSyntaxPtr)(ct91))->cmd[1] = (ds),(cmdSyntaxPtr)(ct66)) - - - -#endif // I2CMD_H diff --git a/drivers/char/ip2/i2ellis.c b/drivers/char/ip2/i2ellis.c deleted file mode 100644 index 29db44de399f..000000000000 --- a/drivers/char/ip2/i2ellis.c +++ /dev/null @@ -1,1403 +0,0 @@ -/******************************************************************************* -* -* (c) 1998 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Low-level interface code for the device driver -* (This is included source code, not a separate compilation -* module.) -* -*******************************************************************************/ -//--------------------------------------------- -// Function declarations private to this module -//--------------------------------------------- -// Functions called only indirectly through i2eBordStr entries. - -static int iiWriteBuf16(i2eBordStrPtr, unsigned char *, int); -static int iiWriteBuf8(i2eBordStrPtr, unsigned char *, int); -static int iiReadBuf16(i2eBordStrPtr, unsigned char *, int); -static int iiReadBuf8(i2eBordStrPtr, unsigned char *, int); - -static unsigned short iiReadWord16(i2eBordStrPtr); -static unsigned short iiReadWord8(i2eBordStrPtr); -static void iiWriteWord16(i2eBordStrPtr, unsigned short); -static void iiWriteWord8(i2eBordStrPtr, unsigned short); - -static int iiWaitForTxEmptyII(i2eBordStrPtr, int); -static int iiWaitForTxEmptyIIEX(i2eBordStrPtr, int); -static int iiTxMailEmptyII(i2eBordStrPtr); -static int iiTxMailEmptyIIEX(i2eBordStrPtr); -static int iiTrySendMailII(i2eBordStrPtr, unsigned char); -static int iiTrySendMailIIEX(i2eBordStrPtr, unsigned char); - -static unsigned short iiGetMailII(i2eBordStrPtr); -static unsigned short iiGetMailIIEX(i2eBordStrPtr); - -static void iiEnableMailIrqII(i2eBordStrPtr); -static void iiEnableMailIrqIIEX(i2eBordStrPtr); -static void iiWriteMaskII(i2eBordStrPtr, unsigned char); -static void iiWriteMaskIIEX(i2eBordStrPtr, unsigned char); - -static void ii2Nop(void); - -//*************** -//* Static Data * -//*************** - -static int ii2Safe; // Safe I/O address for delay routine - -static int iiDelayed; // Set when the iiResetDelay function is - // called. Cleared when ANY board is reset. -static DEFINE_RWLOCK(Dl_spinlock); - -//******** -//* Code * -//******** - -//======================================================= -// Initialization Routines -// -// iiSetAddress -// iiReset -// iiResetDelay -// iiInitialize -//======================================================= - -//****************************************************************************** -// Function: iiSetAddress(pB, address, delay) -// Parameters: pB - pointer to the board structure -// address - the purported I/O address of the board -// delay - pointer to the 1-ms delay function to use -// in this and any future operations to this board -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// This routine (roughly) checks for address validity, sets the i2eValid OK and -// sets the state to II_STATE_COLD which means that we haven't even sent a reset -// yet. -// -//****************************************************************************** -static int -iiSetAddress( i2eBordStrPtr pB, int address, delayFunc_t delay ) -{ - // Should any failure occur before init is finished... - pB->i2eValid = I2E_INCOMPLETE; - - // Cannot check upper limit except extremely: Might be microchannel - // Address must be on an 8-byte boundary - - if ((unsigned int)address <= 0x100 - || (unsigned int)address >= 0xfff8 - || (address & 0x7) - ) - { - I2_COMPLETE(pB, I2EE_BADADDR); - } - - // Initialize accelerators - pB->i2eBase = address; - pB->i2eData = address + FIFO_DATA; - pB->i2eStatus = address + FIFO_STATUS; - pB->i2ePointer = address + FIFO_PTR; - pB->i2eXMail = address + FIFO_MAIL; - pB->i2eXMask = address + FIFO_MASK; - - // Initialize i/o address for ii2DelayIO - ii2Safe = address + FIFO_NOP; - - // Initialize the delay routine - pB->i2eDelay = ((delay != (delayFunc_t)NULL) ? delay : (delayFunc_t)ii2Nop); - - pB->i2eValid = I2E_MAGIC; - pB->i2eState = II_STATE_COLD; - - I2_COMPLETE(pB, I2EE_GOOD); -} - -//****************************************************************************** -// Function: iiReset(pB) -// Parameters: pB - pointer to the board structure -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Attempts to reset the board (see also i2hw.h). Normally, we would use this to -// reset a board immediately after iiSetAddress(), but it is valid to reset a -// board from any state, say, in order to change or re-load loadware. (Under -// such circumstances, no reason to re-run iiSetAddress(), which is why it is a -// separate routine and not included in this routine. -// -//****************************************************************************** -static int -iiReset(i2eBordStrPtr pB) -{ - // Magic number should be set, else even the address is suspect - if (pB->i2eValid != I2E_MAGIC) - { - I2_COMPLETE(pB, I2EE_BADMAGIC); - } - - outb(0, pB->i2eBase + FIFO_RESET); /* Any data will do */ - iiDelay(pB, 50); // Pause between resets - outb(0, pB->i2eBase + FIFO_RESET); /* Second reset */ - - // We must wait before even attempting to read anything from the FIFO: the - // board's P.O.S.T may actually attempt to read and write its end of the - // FIFO in order to check flags, loop back (where supported), etc. On - // completion of this testing it would reset the FIFO, and on completion - // of all // P.O.S.T., write the message. We must not mistake data which - // might have been sent for testing as part of the reset message. To - // better utilize time, say, when resetting several boards, we allow the - // delay to be performed externally; in this way the caller can reset - // several boards, delay a single time, then call the initialization - // routine for all. - - pB->i2eState = II_STATE_RESET; - - iiDelayed = 0; // i.e., the delay routine hasn't been called since the most - // recent reset. - - // Ensure anything which would have been of use to standard loadware is - // blanked out, since board has now forgotten everything!. - - pB->i2eUsingIrq = I2_IRQ_UNDEFINED; /* to not use an interrupt so far */ - pB->i2eWaitingForEmptyFifo = 0; - pB->i2eOutMailWaiting = 0; - pB->i2eChannelPtr = NULL; - pB->i2eChannelCnt = 0; - - pB->i2eLeadoffWord[0] = 0; - pB->i2eFifoInInts = 0; - pB->i2eFifoOutInts = 0; - pB->i2eFatalTrap = NULL; - pB->i2eFatal = 0; - - I2_COMPLETE(pB, I2EE_GOOD); -} - -//****************************************************************************** -// Function: iiResetDelay(pB) -// Parameters: pB - pointer to the board structure -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Using the delay defined in board structure, waits two seconds (for board to -// reset). -// -//****************************************************************************** -static int -iiResetDelay(i2eBordStrPtr pB) -{ - if (pB->i2eValid != I2E_MAGIC) { - I2_COMPLETE(pB, I2EE_BADMAGIC); - } - if (pB->i2eState != II_STATE_RESET) { - I2_COMPLETE(pB, I2EE_BADSTATE); - } - iiDelay(pB,2000); /* Now we wait for two seconds. */ - iiDelayed = 1; /* Delay has been called: ok to initialize */ - I2_COMPLETE(pB, I2EE_GOOD); -} - -//****************************************************************************** -// Function: iiInitialize(pB) -// Parameters: pB - pointer to the board structure -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Attempts to read the Power-on reset message. Initializes any remaining fields -// in the pB structure. -// -// This should be called as the third step of a process beginning with -// iiReset(), then iiResetDelay(). This routine checks to see that the structure -// is "valid" and in the reset state, also confirms that the delay routine has -// been called since the latest reset (to any board! overly strong!). -// -//****************************************************************************** -static int -iiInitialize(i2eBordStrPtr pB) -{ - int itemp; - unsigned char c; - unsigned short utemp; - unsigned int ilimit; - - if (pB->i2eValid != I2E_MAGIC) - { - I2_COMPLETE(pB, I2EE_BADMAGIC); - } - - if (pB->i2eState != II_STATE_RESET || !iiDelayed) - { - I2_COMPLETE(pB, I2EE_BADSTATE); - } - - // In case there is a failure short of our completely reading the power-up - // message. - pB->i2eValid = I2E_INCOMPLETE; - - - // Now attempt to read the message. - - for (itemp = 0; itemp < sizeof(porStr); itemp++) - { - // We expect the entire message is ready. - if (!I2_HAS_INPUT(pB)) { - pB->i2ePomSize = itemp; - I2_COMPLETE(pB, I2EE_PORM_SHORT); - } - - pB->i2ePom.c[itemp] = c = inb(pB->i2eData); - - // We check the magic numbers as soon as they are supposed to be read - // (rather than after) to minimize effect of reading something we - // already suspect can't be "us". - if ( (itemp == POR_1_INDEX && c != POR_MAGIC_1) || - (itemp == POR_2_INDEX && c != POR_MAGIC_2)) - { - pB->i2ePomSize = itemp+1; - I2_COMPLETE(pB, I2EE_BADMAGIC); - } - } - - pB->i2ePomSize = itemp; - - // Ensure that this was all the data... - if (I2_HAS_INPUT(pB)) - I2_COMPLETE(pB, I2EE_PORM_LONG); - - // For now, we'll fail to initialize if P.O.S.T reports bad chip mapper: - // Implying we will not be able to download any code either: That's ok: the - // condition is pretty explicit. - if (pB->i2ePom.e.porDiag1 & POR_BAD_MAPPER) - { - I2_COMPLETE(pB, I2EE_POSTERR); - } - - // Determine anything which must be done differently depending on the family - // of boards! - switch (pB->i2ePom.e.porID & POR_ID_FAMILY) - { - case POR_ID_FII: // IntelliPort-II - - pB->i2eFifoStyle = FIFO_II; - pB->i2eFifoSize = 512; // 512 bytes, always - pB->i2eDataWidth16 = false; - - pB->i2eMaxIrq = 15; // Because board cannot tell us it is in an 8-bit - // slot, we do allow it to be done (documentation!) - - pB->i2eGoodMap[1] = - pB->i2eGoodMap[2] = - pB->i2eGoodMap[3] = - pB->i2eChannelMap[1] = - pB->i2eChannelMap[2] = - pB->i2eChannelMap[3] = 0; - - switch (pB->i2ePom.e.porID & POR_ID_SIZE) - { - case POR_ID_II_4: - pB->i2eGoodMap[0] = - pB->i2eChannelMap[0] = 0x0f; // four-port - - // Since porPorts1 is based on the Hardware ID register, the numbers - // should always be consistent for IntelliPort-II. Ditto below... - if (pB->i2ePom.e.porPorts1 != 4) - { - I2_COMPLETE(pB, I2EE_INCONSIST); - } - break; - - case POR_ID_II_8: - case POR_ID_II_8R: - pB->i2eGoodMap[0] = - pB->i2eChannelMap[0] = 0xff; // Eight port - if (pB->i2ePom.e.porPorts1 != 8) - { - I2_COMPLETE(pB, I2EE_INCONSIST); - } - break; - - case POR_ID_II_6: - pB->i2eGoodMap[0] = - pB->i2eChannelMap[0] = 0x3f; // Six Port - if (pB->i2ePom.e.porPorts1 != 6) - { - I2_COMPLETE(pB, I2EE_INCONSIST); - } - break; - } - - // Fix up the "good channel list based on any errors reported. - if (pB->i2ePom.e.porDiag1 & POR_BAD_UART1) - { - pB->i2eGoodMap[0] &= ~0x0f; - } - - if (pB->i2ePom.e.porDiag1 & POR_BAD_UART2) - { - pB->i2eGoodMap[0] &= ~0xf0; - } - - break; // POR_ID_FII case - - case POR_ID_FIIEX: // IntelliPort-IIEX - - pB->i2eFifoStyle = FIFO_IIEX; - - itemp = pB->i2ePom.e.porFifoSize; - - // Implicit assumption that fifo would not grow beyond 32k, - // nor would ever be less than 256. - - if (itemp < 8 || itemp > 15) - { - I2_COMPLETE(pB, I2EE_INCONSIST); - } - pB->i2eFifoSize = (1 << itemp); - - // These are based on what P.O.S.T thinks should be there, based on - // box ID registers - ilimit = pB->i2ePom.e.porNumBoxes; - if (ilimit > ABS_MAX_BOXES) - { - ilimit = ABS_MAX_BOXES; - } - - // For as many boxes as EXIST, gives the type of box. - // Added 8/6/93: check for the ISA-4 (asic) which looks like an - // expandable but for whom "8 or 16?" is not the right question. - - utemp = pB->i2ePom.e.porFlags; - if (utemp & POR_CEX4) - { - pB->i2eChannelMap[0] = 0x000f; - } else { - utemp &= POR_BOXES; - for (itemp = 0; itemp < ilimit; itemp++) - { - pB->i2eChannelMap[itemp] = - ((utemp & POR_BOX_16) ? 0xffff : 0x00ff); - utemp >>= 1; - } - } - - // These are based on what P.O.S.T actually found. - - utemp = (pB->i2ePom.e.porPorts2 << 8) + pB->i2ePom.e.porPorts1; - - for (itemp = 0; itemp < ilimit; itemp++) - { - pB->i2eGoodMap[itemp] = 0; - if (utemp & 1) pB->i2eGoodMap[itemp] |= 0x000f; - if (utemp & 2) pB->i2eGoodMap[itemp] |= 0x00f0; - if (utemp & 4) pB->i2eGoodMap[itemp] |= 0x0f00; - if (utemp & 8) pB->i2eGoodMap[itemp] |= 0xf000; - utemp >>= 4; - } - - // Now determine whether we should transfer in 8 or 16-bit mode. - switch (pB->i2ePom.e.porBus & (POR_BUS_SLOT16 | POR_BUS_DIP16) ) - { - case POR_BUS_SLOT16 | POR_BUS_DIP16: - pB->i2eDataWidth16 = true; - pB->i2eMaxIrq = 15; - break; - - case POR_BUS_SLOT16: - pB->i2eDataWidth16 = false; - pB->i2eMaxIrq = 15; - break; - - case 0: - case POR_BUS_DIP16: // In an 8-bit slot, DIP switch don't care. - default: - pB->i2eDataWidth16 = false; - pB->i2eMaxIrq = 7; - break; - } - break; // POR_ID_FIIEX case - - default: // Unknown type of board - I2_COMPLETE(pB, I2EE_BAD_FAMILY); - break; - } // End the switch based on family - - // Temporarily, claim there is no room in the outbound fifo. - // We will maintain this whenever we check for an empty outbound FIFO. - pB->i2eFifoRemains = 0; - - // Now, based on the bus type, should we expect to be able to re-configure - // interrupts (say, for testing purposes). - switch (pB->i2ePom.e.porBus & POR_BUS_TYPE) - { - case POR_BUS_T_ISA: - case POR_BUS_T_UNK: // If the type of bus is undeclared, assume ok. - case POR_BUS_T_MCA: - case POR_BUS_T_EISA: - break; - default: - I2_COMPLETE(pB, I2EE_BADBUS); - } - - if (pB->i2eDataWidth16) - { - pB->i2eWriteBuf = iiWriteBuf16; - pB->i2eReadBuf = iiReadBuf16; - pB->i2eWriteWord = iiWriteWord16; - pB->i2eReadWord = iiReadWord16; - } else { - pB->i2eWriteBuf = iiWriteBuf8; - pB->i2eReadBuf = iiReadBuf8; - pB->i2eWriteWord = iiWriteWord8; - pB->i2eReadWord = iiReadWord8; - } - - switch(pB->i2eFifoStyle) - { - case FIFO_II: - pB->i2eWaitForTxEmpty = iiWaitForTxEmptyII; - pB->i2eTxMailEmpty = iiTxMailEmptyII; - pB->i2eTrySendMail = iiTrySendMailII; - pB->i2eGetMail = iiGetMailII; - pB->i2eEnableMailIrq = iiEnableMailIrqII; - pB->i2eWriteMask = iiWriteMaskII; - - break; - - case FIFO_IIEX: - pB->i2eWaitForTxEmpty = iiWaitForTxEmptyIIEX; - pB->i2eTxMailEmpty = iiTxMailEmptyIIEX; - pB->i2eTrySendMail = iiTrySendMailIIEX; - pB->i2eGetMail = iiGetMailIIEX; - pB->i2eEnableMailIrq = iiEnableMailIrqIIEX; - pB->i2eWriteMask = iiWriteMaskIIEX; - - break; - - default: - I2_COMPLETE(pB, I2EE_INCONSIST); - } - - // Initialize state information. - pB->i2eState = II_STATE_READY; // Ready to load loadware. - - // Some Final cleanup: - // For some boards, the bootstrap firmware may perform some sort of test - // resulting in a stray character pending in the incoming mailbox. If one is - // there, it should be read and discarded, especially since for the standard - // firmware, it's the mailbox that interrupts the host. - - pB->i2eStartMail = iiGetMail(pB); - - // Throw it away and clear the mailbox structure element - pB->i2eStartMail = NO_MAIL_HERE; - - // Everything is ok now, return with good status/ - - pB->i2eValid = I2E_MAGIC; - I2_COMPLETE(pB, I2EE_GOOD); -} - -//****************************************************************************** -// Function: ii2DelayTimer(mseconds) -// Parameters: mseconds - number of milliseconds to delay -// -// Returns: Nothing -// -// Description: -// -// This routine delays for approximately mseconds milliseconds and is intended -// to be called indirectly through i2Delay field in i2eBordStr. It uses the -// Linux timer_list mechanism. -// -// The Linux timers use a unit called "jiffies" which are 10mS in the Intel -// architecture. This function rounds the delay period up to the next "jiffy". -// In the Alpha architecture the "jiffy" is 1mS, but this driver is not intended -// for Alpha platforms at this time. -// -//****************************************************************************** -static void -ii2DelayTimer(unsigned int mseconds) -{ - msleep_interruptible(mseconds); -} - -#if 0 -//static void ii2DelayIO(unsigned int); -//****************************************************************************** -// !!! Not Used, this is DOS crap, some of you young folks may be interested in -// in how things were done in the stone age of caculating machines !!! -// Function: ii2DelayIO(mseconds) -// Parameters: mseconds - number of milliseconds to delay -// -// Returns: Nothing -// -// Description: -// -// This routine delays for approximately mseconds milliseconds and is intended -// to be called indirectly through i2Delay field in i2eBordStr. It is intended -// for use where a clock-based function is impossible: for example, DOS drivers. -// -// This function uses the IN instruction to place bounds on the timing and -// assumes that ii2Safe has been set. This is because I/O instructions are not -// subject to caching and will therefore take a certain minimum time. To ensure -// the delay is at least long enough on fast machines, it is based on some -// fastest-case calculations. On slower machines this may cause VERY long -// delays. (3 x fastest case). In the fastest case, everything is cached except -// the I/O instruction itself. -// -// Timing calculations: -// The fastest bus speed for I/O operations is likely to be 10 MHz. The I/O -// operation in question is a byte operation to an odd address. For 8-bit -// operations, the architecture generally enforces two wait states. At 10 MHz, a -// single cycle time is 100nS. A read operation at two wait states takes 6 -// cycles for a total time of 600nS. Therefore approximately 1666 iterations -// would be required to generate a single millisecond delay. The worst -// (reasonable) case would be an 8MHz system with no cacheing. In this case, the -// I/O instruction would take 125nS x 6 cyles = 750 nS. More importantly, code -// fetch of other instructions in the loop would take time (zero wait states, -// however) and would be hard to estimate. This is minimized by using in-line -// assembler for the in inner loop of IN instructions. This consists of just a -// few bytes. So we'll guess about four code fetches per loop. Each code fetch -// should take four cycles, so we have 125nS * 8 = 1000nS. Worst case then is -// that what should have taken 1 mS takes instead 1666 * (1750) = 2.9 mS. -// -// So much for theoretical timings: results using 1666 value on some actual -// machines: -// IBM 286 6MHz 3.15 mS -// Zenith 386 33MHz 2.45 mS -// (brandX) 386 33MHz 1.90 mS (has cache) -// (brandY) 486 33MHz 2.35 mS -// NCR 486 ?? 1.65 mS (microchannel) -// -// For most machines, it is probably safe to scale this number back (remember, -// for robust operation use an actual timed delay if possible), so we are using -// a value of 1190. This yields 1.17 mS for the fastest machine in our sample, -// 1.75 mS for typical 386 machines, and 2.25 mS the absolute slowest machine. -// -// 1/29/93: -// The above timings are too slow. Actual cycle times might be faster. ISA cycle -// times could approach 500 nS, and ... -// The IBM model 77 being microchannel has no wait states for 8-bit reads and -// seems to be accessing the I/O at 440 nS per access (from start of one to -// start of next). This would imply we need 1000/.440 = 2272 iterations to -// guarantee we are fast enough. In actual testing, we see that 2 * 1190 are in -// fact enough. For diagnostics, we keep the level at 1190, but developers note -// this needs tuning. -// -// Safe assumption: 2270 i/o reads = 1 millisecond -// -//****************************************************************************** - - -static int ii2DelValue = 1190; // See timing calculations below - // 1666 for fastest theoretical machine - // 1190 safe for most fast 386 machines - // 1000 for fastest machine tested here - // 540 (sic) for AT286/6Mhz -static void -ii2DelayIO(unsigned int mseconds) -{ - if (!ii2Safe) - return; /* Do nothing if this variable uninitialized */ - - while(mseconds--) { - int i = ii2DelValue; - while ( i-- ) { - inb(ii2Safe); - } - } -} -#endif - -//****************************************************************************** -// Function: ii2Nop() -// Parameters: None -// -// Returns: Nothing -// -// Description: -// -// iiInitialize will set i2eDelay to this if the delay parameter is NULL. This -// saves checking for a NULL pointer at every call. -//****************************************************************************** -static void -ii2Nop(void) -{ - return; // no mystery here -} - -//======================================================= -// Routines which are available in 8/16-bit versions, or -// in different fifo styles. These are ALL called -// indirectly through the board structure. -//======================================================= - -//****************************************************************************** -// Function: iiWriteBuf16(pB, address, count) -// Parameters: pB - pointer to board structure -// address - address of data to write -// count - number of data bytes to write -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Writes 'count' bytes from 'address' to the data fifo specified by the board -// structure pointer pB. Should count happen to be odd, an extra pad byte is -// sent (identity unknown...). Uses 16-bit (word) operations. Is called -// indirectly through pB->i2eWriteBuf. -// -//****************************************************************************** -static int -iiWriteBuf16(i2eBordStrPtr pB, unsigned char *address, int count) -{ - // Rudimentary sanity checking here. - if (pB->i2eValid != I2E_MAGIC) - I2_COMPLETE(pB, I2EE_INVALID); - - I2_OUTSW(pB->i2eData, address, count); - - I2_COMPLETE(pB, I2EE_GOOD); -} - -//****************************************************************************** -// Function: iiWriteBuf8(pB, address, count) -// Parameters: pB - pointer to board structure -// address - address of data to write -// count - number of data bytes to write -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Writes 'count' bytes from 'address' to the data fifo specified by the board -// structure pointer pB. Should count happen to be odd, an extra pad byte is -// sent (identity unknown...). This is to be consistent with the 16-bit version. -// Uses 8-bit (byte) operations. Is called indirectly through pB->i2eWriteBuf. -// -//****************************************************************************** -static int -iiWriteBuf8(i2eBordStrPtr pB, unsigned char *address, int count) -{ - /* Rudimentary sanity checking here */ - if (pB->i2eValid != I2E_MAGIC) - I2_COMPLETE(pB, I2EE_INVALID); - - I2_OUTSB(pB->i2eData, address, count); - - I2_COMPLETE(pB, I2EE_GOOD); -} - -//****************************************************************************** -// Function: iiReadBuf16(pB, address, count) -// Parameters: pB - pointer to board structure -// address - address to put data read -// count - number of data bytes to read -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Reads 'count' bytes into 'address' from the data fifo specified by the board -// structure pointer pB. Should count happen to be odd, an extra pad byte is -// received (identity unknown...). Uses 16-bit (word) operations. Is called -// indirectly through pB->i2eReadBuf. -// -//****************************************************************************** -static int -iiReadBuf16(i2eBordStrPtr pB, unsigned char *address, int count) -{ - // Rudimentary sanity checking here. - if (pB->i2eValid != I2E_MAGIC) - I2_COMPLETE(pB, I2EE_INVALID); - - I2_INSW(pB->i2eData, address, count); - - I2_COMPLETE(pB, I2EE_GOOD); -} - -//****************************************************************************** -// Function: iiReadBuf8(pB, address, count) -// Parameters: pB - pointer to board structure -// address - address to put data read -// count - number of data bytes to read -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Reads 'count' bytes into 'address' from the data fifo specified by the board -// structure pointer pB. Should count happen to be odd, an extra pad byte is -// received (identity unknown...). This to match the 16-bit behaviour. Uses -// 8-bit (byte) operations. Is called indirectly through pB->i2eReadBuf. -// -//****************************************************************************** -static int -iiReadBuf8(i2eBordStrPtr pB, unsigned char *address, int count) -{ - // Rudimentary sanity checking here. - if (pB->i2eValid != I2E_MAGIC) - I2_COMPLETE(pB, I2EE_INVALID); - - I2_INSB(pB->i2eData, address, count); - - I2_COMPLETE(pB, I2EE_GOOD); -} - -//****************************************************************************** -// Function: iiReadWord16(pB) -// Parameters: pB - pointer to board structure -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Returns the word read from the data fifo specified by the board-structure -// pointer pB. Uses a 16-bit operation. Is called indirectly through -// pB->i2eReadWord. -// -//****************************************************************************** -static unsigned short -iiReadWord16(i2eBordStrPtr pB) -{ - return inw(pB->i2eData); -} - -//****************************************************************************** -// Function: iiReadWord8(pB) -// Parameters: pB - pointer to board structure -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Returns the word read from the data fifo specified by the board-structure -// pointer pB. Uses two 8-bit operations. Bytes are assumed to be LSB first. Is -// called indirectly through pB->i2eReadWord. -// -//****************************************************************************** -static unsigned short -iiReadWord8(i2eBordStrPtr pB) -{ - unsigned short urs; - - urs = inb(pB->i2eData); - - return (inb(pB->i2eData) << 8) | urs; -} - -//****************************************************************************** -// Function: iiWriteWord16(pB, value) -// Parameters: pB - pointer to board structure -// value - data to write -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Writes the word 'value' to the data fifo specified by the board-structure -// pointer pB. Uses 16-bit operation. Is called indirectly through -// pB->i2eWriteWord. -// -//****************************************************************************** -static void -iiWriteWord16(i2eBordStrPtr pB, unsigned short value) -{ - outw((int)value, pB->i2eData); -} - -//****************************************************************************** -// Function: iiWriteWord8(pB, value) -// Parameters: pB - pointer to board structure -// value - data to write -// -// Returns: True if everything appears copacetic. -// False if there is any error: the pB->i2eError field has the error -// -// Description: -// -// Writes the word 'value' to the data fifo specified by the board-structure -// pointer pB. Uses two 8-bit operations (writes LSB first). Is called -// indirectly through pB->i2eWriteWord. -// -//****************************************************************************** -static void -iiWriteWord8(i2eBordStrPtr pB, unsigned short value) -{ - outb((char)value, pB->i2eData); - outb((char)(value >> 8), pB->i2eData); -} - -//****************************************************************************** -// Function: iiWaitForTxEmptyII(pB, mSdelay) -// Parameters: pB - pointer to board structure -// mSdelay - period to wait before returning -// -// Returns: True if the FIFO is empty. -// False if it not empty in the required time: the pB->i2eError -// field has the error. -// -// Description: -// -// Waits up to "mSdelay" milliseconds for the outgoing FIFO to become empty; if -// not empty by the required time, returns false and error in pB->i2eError, -// otherwise returns true. -// -// mSdelay == 0 is taken to mean must be empty on the first test. -// -// This version operates on IntelliPort-II - style FIFO's -// -// Note this routine is organized so that if status is ok there is no delay at -// all called either before or after the test. Is called indirectly through -// pB->i2eWaitForTxEmpty. -// -//****************************************************************************** -static int -iiWaitForTxEmptyII(i2eBordStrPtr pB, int mSdelay) -{ - unsigned long flags; - int itemp; - - for (;;) - { - // This routine hinges on being able to see the "other" status register - // (as seen by the local processor). His incoming fifo is our outgoing - // FIFO. - // - // By the nature of this routine, you would be using this as part of a - // larger atomic context: i.e., you would use this routine to ensure the - // fifo empty, then act on this information. Between these two halves, - // you will generally not want to service interrupts or in any way - // disrupt the assumptions implicit in the larger context. - // - // Even worse, however, this routine "shifts" the status register to - // point to the local status register which is not the usual situation. - // Therefore for extra safety, we force the critical section to be - // completely atomic, and pick up after ourselves before allowing any - // interrupts of any kind. - - - write_lock_irqsave(&Dl_spinlock, flags); - outb(SEL_COMMAND, pB->i2ePointer); - outb(SEL_CMD_SH, pB->i2ePointer); - - itemp = inb(pB->i2eStatus); - - outb(SEL_COMMAND, pB->i2ePointer); - outb(SEL_CMD_UNSH, pB->i2ePointer); - - if (itemp & ST_IN_EMPTY) - { - I2_UPDATE_FIFO_ROOM(pB); - write_unlock_irqrestore(&Dl_spinlock, flags); - I2_COMPLETE(pB, I2EE_GOOD); - } - - write_unlock_irqrestore(&Dl_spinlock, flags); - - if (mSdelay-- == 0) - break; - - iiDelay(pB, 1); /* 1 mS granularity on checking condition */ - } - I2_COMPLETE(pB, I2EE_TXE_TIME); -} - -//****************************************************************************** -// Function: iiWaitForTxEmptyIIEX(pB, mSdelay) -// Parameters: pB - pointer to board structure -// mSdelay - period to wait before returning -// -// Returns: True if the FIFO is empty. -// False if it not empty in the required time: the pB->i2eError -// field has the error. -// -// Description: -// -// Waits up to "mSdelay" milliseconds for the outgoing FIFO to become empty; if -// not empty by the required time, returns false and error in pB->i2eError, -// otherwise returns true. -// -// mSdelay == 0 is taken to mean must be empty on the first test. -// -// This version operates on IntelliPort-IIEX - style FIFO's -// -// Note this routine is organized so that if status is ok there is no delay at -// all called either before or after the test. Is called indirectly through -// pB->i2eWaitForTxEmpty. -// -//****************************************************************************** -static int -iiWaitForTxEmptyIIEX(i2eBordStrPtr pB, int mSdelay) -{ - unsigned long flags; - - for (;;) - { - // By the nature of this routine, you would be using this as part of a - // larger atomic context: i.e., you would use this routine to ensure the - // fifo empty, then act on this information. Between these two halves, - // you will generally not want to service interrupts or in any way - // disrupt the assumptions implicit in the larger context. - - write_lock_irqsave(&Dl_spinlock, flags); - - if (inb(pB->i2eStatus) & STE_OUT_MT) { - I2_UPDATE_FIFO_ROOM(pB); - write_unlock_irqrestore(&Dl_spinlock, flags); - I2_COMPLETE(pB, I2EE_GOOD); - } - write_unlock_irqrestore(&Dl_spinlock, flags); - - if (mSdelay-- == 0) - break; - - iiDelay(pB, 1); // 1 mS granularity on checking condition - } - I2_COMPLETE(pB, I2EE_TXE_TIME); -} - -//****************************************************************************** -// Function: iiTxMailEmptyII(pB) -// Parameters: pB - pointer to board structure -// -// Returns: True if the transmit mailbox is empty. -// False if it not empty. -// -// Description: -// -// Returns true or false according to whether the transmit mailbox is empty (and -// therefore able to accept more mail) -// -// This version operates on IntelliPort-II - style FIFO's -// -//****************************************************************************** -static int -iiTxMailEmptyII(i2eBordStrPtr pB) -{ - int port = pB->i2ePointer; - outb(SEL_OUTMAIL, port); - return inb(port) == 0; -} - -//****************************************************************************** -// Function: iiTxMailEmptyIIEX(pB) -// Parameters: pB - pointer to board structure -// -// Returns: True if the transmit mailbox is empty. -// False if it not empty. -// -// Description: -// -// Returns true or false according to whether the transmit mailbox is empty (and -// therefore able to accept more mail) -// -// This version operates on IntelliPort-IIEX - style FIFO's -// -//****************************************************************************** -static int -iiTxMailEmptyIIEX(i2eBordStrPtr pB) -{ - return !(inb(pB->i2eStatus) & STE_OUT_MAIL); -} - -//****************************************************************************** -// Function: iiTrySendMailII(pB,mail) -// Parameters: pB - pointer to board structure -// mail - value to write to mailbox -// -// Returns: True if the transmit mailbox is empty, and mail is sent. -// False if it not empty. -// -// Description: -// -// If outgoing mailbox is empty, sends mail and returns true. If outgoing -// mailbox is not empty, returns false. -// -// This version operates on IntelliPort-II - style FIFO's -// -//****************************************************************************** -static int -iiTrySendMailII(i2eBordStrPtr pB, unsigned char mail) -{ - int port = pB->i2ePointer; - - outb(SEL_OUTMAIL, port); - if (inb(port) == 0) { - outb(SEL_OUTMAIL, port); - outb(mail, port); - return 1; - } - return 0; -} - -//****************************************************************************** -// Function: iiTrySendMailIIEX(pB,mail) -// Parameters: pB - pointer to board structure -// mail - value to write to mailbox -// -// Returns: True if the transmit mailbox is empty, and mail is sent. -// False if it not empty. -// -// Description: -// -// If outgoing mailbox is empty, sends mail and returns true. If outgoing -// mailbox is not empty, returns false. -// -// This version operates on IntelliPort-IIEX - style FIFO's -// -//****************************************************************************** -static int -iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail) -{ - if (inb(pB->i2eStatus) & STE_OUT_MAIL) - return 0; - outb(mail, pB->i2eXMail); - return 1; -} - -//****************************************************************************** -// Function: iiGetMailII(pB,mail) -// Parameters: pB - pointer to board structure -// -// Returns: Mailbox data or NO_MAIL_HERE. -// -// Description: -// -// If no mail available, returns NO_MAIL_HERE otherwise returns the data from -// the mailbox, which is guaranteed != NO_MAIL_HERE. -// -// This version operates on IntelliPort-II - style FIFO's -// -//****************************************************************************** -static unsigned short -iiGetMailII(i2eBordStrPtr pB) -{ - if (I2_HAS_MAIL(pB)) { - outb(SEL_INMAIL, pB->i2ePointer); - return inb(pB->i2ePointer); - } else { - return NO_MAIL_HERE; - } -} - -//****************************************************************************** -// Function: iiGetMailIIEX(pB,mail) -// Parameters: pB - pointer to board structure -// -// Returns: Mailbox data or NO_MAIL_HERE. -// -// Description: -// -// If no mail available, returns NO_MAIL_HERE otherwise returns the data from -// the mailbox, which is guaranteed != NO_MAIL_HERE. -// -// This version operates on IntelliPort-IIEX - style FIFO's -// -//****************************************************************************** -static unsigned short -iiGetMailIIEX(i2eBordStrPtr pB) -{ - if (I2_HAS_MAIL(pB)) - return inb(pB->i2eXMail); - else - return NO_MAIL_HERE; -} - -//****************************************************************************** -// Function: iiEnableMailIrqII(pB) -// Parameters: pB - pointer to board structure -// -// Returns: Nothing -// -// Description: -// -// Enables board to interrupt host (only) by writing to host's in-bound mailbox. -// -// This version operates on IntelliPort-II - style FIFO's -// -//****************************************************************************** -static void -iiEnableMailIrqII(i2eBordStrPtr pB) -{ - outb(SEL_MASK, pB->i2ePointer); - outb(ST_IN_MAIL, pB->i2ePointer); -} - -//****************************************************************************** -// Function: iiEnableMailIrqIIEX(pB) -// Parameters: pB - pointer to board structure -// -// Returns: Nothing -// -// Description: -// -// Enables board to interrupt host (only) by writing to host's in-bound mailbox. -// -// This version operates on IntelliPort-IIEX - style FIFO's -// -//****************************************************************************** -static void -iiEnableMailIrqIIEX(i2eBordStrPtr pB) -{ - outb(MX_IN_MAIL, pB->i2eXMask); -} - -//****************************************************************************** -// Function: iiWriteMaskII(pB) -// Parameters: pB - pointer to board structure -// -// Returns: Nothing -// -// Description: -// -// Writes arbitrary value to the mask register. -// -// This version operates on IntelliPort-II - style FIFO's -// -//****************************************************************************** -static void -iiWriteMaskII(i2eBordStrPtr pB, unsigned char value) -{ - outb(SEL_MASK, pB->i2ePointer); - outb(value, pB->i2ePointer); -} - -//****************************************************************************** -// Function: iiWriteMaskIIEX(pB) -// Parameters: pB - pointer to board structure -// -// Returns: Nothing -// -// Description: -// -// Writes arbitrary value to the mask register. -// -// This version operates on IntelliPort-IIEX - style FIFO's -// -//****************************************************************************** -static void -iiWriteMaskIIEX(i2eBordStrPtr pB, unsigned char value) -{ - outb(value, pB->i2eXMask); -} - -//****************************************************************************** -// Function: iiDownloadBlock(pB, pSource, isStandard) -// Parameters: pB - pointer to board structure -// pSource - loadware block to download -// isStandard - True if "standard" loadware, else false. -// -// Returns: Success or Failure -// -// Description: -// -// Downloads a single block (at pSource)to the board referenced by pB. Caller -// sets isStandard to true/false according to whether the "standard" loadware is -// what's being loaded. The normal process, then, is to perform an iiInitialize -// to the board, then perform some number of iiDownloadBlocks using the returned -// state to determine when download is complete. -// -// Possible return values: (see I2ELLIS.H) -// II_DOWN_BADVALID -// II_DOWN_BADFILE -// II_DOWN_CONTINUING -// II_DOWN_GOOD -// II_DOWN_BAD -// II_DOWN_BADSTATE -// II_DOWN_TIMEOUT -// -// Uses the i2eState and i2eToLoad fields (initialized at iiInitialize) to -// determine whether this is the first block, whether to check for magic -// numbers, how many blocks there are to go... -// -//****************************************************************************** -static int -iiDownloadBlock ( i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard) -{ - int itemp; - int loadedFirst; - - if (pB->i2eValid != I2E_MAGIC) return II_DOWN_BADVALID; - - switch(pB->i2eState) - { - case II_STATE_READY: - - // Loading the first block after reset. Must check the magic number of the - // loadfile, store the number of blocks we expect to load. - if (pSource->e.loadMagic != MAGIC_LOADFILE) - { - return II_DOWN_BADFILE; - } - - // Next we store the total number of blocks to load, including this one. - pB->i2eToLoad = 1 + pSource->e.loadBlocksMore; - - // Set the state, store the version numbers. ('Cause this may have come - // from a file - we might want to report these versions and revisions in - // case of an error! - pB->i2eState = II_STATE_LOADING; - pB->i2eLVersion = pSource->e.loadVersion; - pB->i2eLRevision = pSource->e.loadRevision; - pB->i2eLSub = pSource->e.loadSubRevision; - - // The time and date of compilation is also available but don't bother - // storing it for normal purposes. - loadedFirst = 1; - break; - - case II_STATE_LOADING: - loadedFirst = 0; - break; - - default: - return II_DOWN_BADSTATE; - } - - // Now we must be in the II_STATE_LOADING state, and we assume i2eToLoad - // must be positive still, because otherwise we would have cleaned up last - // time and set the state to II_STATE_LOADED. - if (!iiWaitForTxEmpty(pB, MAX_DLOAD_READ_TIME)) { - return II_DOWN_TIMEOUT; - } - - if (!iiWriteBuf(pB, pSource->c, LOADWARE_BLOCK_SIZE)) { - return II_DOWN_BADVALID; - } - - // If we just loaded the first block, wait for the fifo to empty an extra - // long time to allow for any special startup code in the firmware, like - // sending status messages to the LCD's. - - if (loadedFirst) { - if (!iiWaitForTxEmpty(pB, MAX_DLOAD_START_TIME)) { - return II_DOWN_TIMEOUT; - } - } - - // Determine whether this was our last block! - if (--(pB->i2eToLoad)) { - return II_DOWN_CONTINUING; // more to come... - } - - // It WAS our last block: Clean up operations... - // ...Wait for last buffer to drain from the board... - if (!iiWaitForTxEmpty(pB, MAX_DLOAD_READ_TIME)) { - return II_DOWN_TIMEOUT; - } - // If there were only a single block written, this would come back - // immediately and be harmless, though not strictly necessary. - itemp = MAX_DLOAD_ACK_TIME/10; - while (--itemp) { - if (I2_HAS_INPUT(pB)) { - switch (inb(pB->i2eData)) { - case LOADWARE_OK: - pB->i2eState = - isStandard ? II_STATE_STDLOADED :II_STATE_LOADED; - - // Some revisions of the bootstrap firmware (e.g. ISA-8 1.0.2) - // will, // if there is a debug port attached, require some - // time to send information to the debug port now. It will do - // this before // executing any of the code we just downloaded. - // It may take up to 700 milliseconds. - if (pB->i2ePom.e.porDiag2 & POR_DEBUG_PORT) { - iiDelay(pB, 700); - } - - return II_DOWN_GOOD; - - case LOADWARE_BAD: - default: - return II_DOWN_BAD; - } - } - - iiDelay(pB, 10); // 10 mS granularity on checking condition - } - - // Drop-through --> timed out waiting for firmware confirmation - - pB->i2eState = II_STATE_BADLOAD; - return II_DOWN_TIMEOUT; -} - -//****************************************************************************** -// Function: iiDownloadAll(pB, pSource, isStandard, size) -// Parameters: pB - pointer to board structure -// pSource - loadware block to download -// isStandard - True if "standard" loadware, else false. -// size - size of data to download (in bytes) -// -// Returns: Success or Failure -// -// Description: -// -// Given a pointer to a board structure, a pointer to the beginning of some -// loadware, whether it is considered the "standard loadware", and the size of -// the array in bytes loads the entire array to the board as loadware. -// -// Assumes the board has been freshly reset and the power-up reset message read. -// (i.e., in II_STATE_READY). Complains if state is bad, or if there seems to be -// too much or too little data to load, or if iiDownloadBlock complains. -//****************************************************************************** -static int -iiDownloadAll(i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard, int size) -{ - int status; - - // We know (from context) board should be ready for the first block of - // download. Complain if not. - if (pB->i2eState != II_STATE_READY) return II_DOWN_BADSTATE; - - while (size > 0) { - size -= LOADWARE_BLOCK_SIZE; // How much data should there be left to - // load after the following operation ? - - // Note we just bump pSource by "one", because its size is actually that - // of an entire block, same as LOADWARE_BLOCK_SIZE. - status = iiDownloadBlock(pB, pSource++, isStandard); - - switch(status) - { - case II_DOWN_GOOD: - return ( (size > 0) ? II_DOWN_OVER : II_DOWN_GOOD); - - case II_DOWN_CONTINUING: - break; - - default: - return status; - } - } - - // We shouldn't drop out: it means "while" caught us with nothing left to - // download, yet the previous DownloadBlock did not return complete. Ergo, - // not enough data to match the size byte in the header. - return II_DOWN_UNDER; -} diff --git a/drivers/char/ip2/i2ellis.h b/drivers/char/ip2/i2ellis.h deleted file mode 100644 index fb6df2456018..000000000000 --- a/drivers/char/ip2/i2ellis.h +++ /dev/null @@ -1,566 +0,0 @@ -/******************************************************************************* -* -* (c) 1999 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Mainline code for the device driver -* -*******************************************************************************/ -//------------------------------------------------------------------------------ -// i2ellis.h -// -// IntelliPort-II and IntelliPort-IIEX -// -// Extremely -// Low -// Level -// Interface -// Services -// -// Structure Definitions and declarations for "ELLIS" service routines found in -// i2ellis.c -// -// These routines are based on properties of the IntelliPort-II and -IIEX -// hardware and bootstrap firmware, and are not sensitive to particular -// conventions of any particular loadware. -// -// Unlike i2hw.h, which provides IRONCLAD hardware definitions, the material -// here and in i2ellis.c is intended to provice a useful, but not required, -// layer of insulation from the hardware specifics. -//------------------------------------------------------------------------------ -#ifndef I2ELLIS_H /* To prevent multiple includes */ -#define I2ELLIS_H 1 -//------------------------------------------------ -// Revision History: -// -// 30 September 1991 MAG First Draft Started -// 12 October 1991 ...continued... -// -// 20 December 1996 AKM Linux version -//------------------------------------------------- - -//---------------------- -// Mandatory Includes: -//---------------------- -#include "ip2types.h" -#include "i2hw.h" // The hardware definitions - -//------------------------------------------ -// STAT_BOXIDS packets -//------------------------------------------ -#define MAX_BOX 4 - -typedef struct _bidStat -{ - unsigned char bid_value[MAX_BOX]; -} bidStat, *bidStatPtr; - -// This packet is sent in response to a CMD_GET_BOXIDS bypass command. For -IIEX -// boards, reports the hardware-specific "asynchronous resource register" on -// each expansion box. Boxes not present report 0xff. For -II boards, the first -// element contains 0x80 for 8-port, 0x40 for 4-port boards. - -// Box IDs aka ARR or Async Resource Register (more than you want to know) -// 7 6 5 4 3 2 1 0 -// F F N N L S S S -// ============================= -// F F - Product Family Designator -// =====+++++++++++++++++++++++++++++++ -// 0 0 - Intelliport II EX / ISA-8 -// 1 0 - IntelliServer -// 0 1 - SAC - Port Device (Intelliport III ??? ) -// =====+++++++++++++++++++++++++++++++++++++++ -// N N - Number of Ports -// 0 0 - 8 (eight) -// 0 1 - 4 (four) -// 1 0 - 12 (twelve) -// 1 1 - 16 (sixteen) -// =++++++++++++++++++++++++++++++++++ -// L - LCD Display Module Present -// 0 - No -// 1 - LCD module present -// =========+++++++++++++++++++++++++++++++++++++ -// S S S - Async Signals Supported Designator -// 0 0 0 - 8dss, Mod DCE DB25 Female -// 0 0 1 - 6dss, RJ-45 -// 0 1 0 - RS-232/422 dss, DB25 Female -// 0 1 1 - RS-232/422 dss, separate 232/422 DB25 Female -// 1 0 0 - 6dss, 921.6 I/F with ST654's -// 1 0 1 - RS-423/232 8dss, RJ-45 10Pin -// 1 1 0 - 6dss, Mod DCE DB25 Female -// 1 1 1 - NO BOX PRESENT - -#define FF(c) ((c & 0xC0) >> 6) -#define NN(c) ((c & 0x30) >> 4) -#define L(c) ((c & 0x08) >> 3) -#define SSS(c) (c & 0x07) - -#define BID_HAS_654(x) (SSS(x) == 0x04) -#define BID_NO_BOX 0xff /* no box */ -#define BID_8PORT 0x80 /* IP2-8 port */ -#define BID_4PORT 0x81 /* IP2-4 port */ -#define BID_EXP_MASK 0x30 /* IP2-EX */ -#define BID_EXP_8PORT 0x00 /* 8, */ -#define BID_EXP_4PORT 0x10 /* 4, */ -#define BID_EXP_UNDEF 0x20 /* UNDEF, */ -#define BID_EXP_16PORT 0x30 /* 16, */ -#define BID_LCD_CTRL 0x08 /* LCD Controller */ -#define BID_LCD_NONE 0x00 /* - no controller present */ -#define BID_LCD_PRES 0x08 /* - controller present */ -#define BID_CON_MASK 0x07 /* - connector pinouts */ -#define BID_CON_DB25 0x00 /* - DB-25 F */ -#define BID_CON_RJ45 0x01 /* - rj45 */ - -//------------------------------------------------------------------------------ -// i2eBordStr -// -// This structure contains all the information the ELLIS routines require in -// dealing with a particular board. -//------------------------------------------------------------------------------ -// There are some queues here which are guaranteed to never contain the entry -// for a single channel twice. So they must be slightly larger to allow -// unambiguous full/empty management -// -#define CH_QUEUE_SIZE ABS_MOST_PORTS+2 - -typedef struct _i2eBordStr -{ - porStr i2ePom; // Structure containing the power-on message. - - unsigned short i2ePomSize; - // The number of bytes actually read if - // different from sizeof i2ePom, indicates - // there is an error! - - unsigned short i2eStartMail; - // Contains whatever inbound mailbox data - // present at startup. NO_MAIL_HERE indicates - // nothing was present. No special - // significance as of this writing, but may be - // useful for diagnostic reasons. - - unsigned short i2eValid; - // Indicates validity of the structure; if - // i2eValid == I2E_MAGIC, then we can trust - // the other fields. Some (especially - // initialization) functions are good about - // checking for validity. Many functions do - // not, it being assumed that the larger - // context assures we are using a valid - // i2eBordStrPtr. - - unsigned short i2eError; - // Used for returning an error condition from - // several functions which use i2eBordStrPtr - // as an argument. - - // Accelerators to characterize separate features of a board, derived from a - // number of sources. - - unsigned short i2eFifoSize; - // Always, the size of the FIFO. For - // IntelliPort-II, always the same, for -IIEX - // taken from the Power-On reset message. - - volatile - unsigned short i2eFifoRemains; - // Used during normal operation to indicate a - // lower bound on the amount of data which - // might be in the outbound fifo. - - unsigned char i2eFifoStyle; - // Accelerator which tells which style (-II or - // -IIEX) FIFO we are using. - - unsigned char i2eDataWidth16; - // Accelerator which tells whether we should - // do 8 or 16-bit data transfers. - - unsigned char i2eMaxIrq; - // The highest allowable IRQ, based on the - // slot size. - - // Accelerators for various addresses on the board - int i2eBase; // I/O Address of the Board - int i2eData; // From here data transfers happen - int i2eStatus; // From here status reads happen - int i2ePointer; // (IntelliPort-II: pointer/commands) - int i2eXMail; // (IntelliPOrt-IIEX: mailboxes - int i2eXMask; // (IntelliPort-IIEX: mask write - - //------------------------------------------------------- - // Information presented in a common format across boards - // For each box, bit map of the channels present. Box closest to - // the host is box 0. LSB is channel 0. IntelliPort-II (non-expandable) - // is taken to be box 0. These are derived from product i.d. registers. - - unsigned short i2eChannelMap[ABS_MAX_BOXES]; - - // Same as above, except each is derived from firmware attempting to detect - // the uart presence (by reading a valid GFRCR register). If bits are set in - // i2eChannelMap and not in i2eGoodMap, there is a potential problem. - - unsigned short i2eGoodMap[ABS_MAX_BOXES]; - - // --------------------------- - // For indirect function calls - - // Routine to cause an N-millisecond delay: Patched by the ii2Initialize - // function. - - void (*i2eDelay)(unsigned int); - - // Routine to write N bytes to the board through the FIFO. Returns true if - // all copacetic, otherwise returns false and error is in i2eError field. - // IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER. - - int (*i2eWriteBuf)(struct _i2eBordStr *, unsigned char *, int); - - // Routine to read N bytes from the board through the FIFO. Returns true if - // copacetic, otherwise returns false and error in i2eError. - // IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER. - - int (*i2eReadBuf)(struct _i2eBordStr *, unsigned char *, int); - - // Returns a word from FIFO. Will use 2 byte operations if needed. - - unsigned short (*i2eReadWord)(struct _i2eBordStr *); - - // Writes a word to FIFO. Will use 2 byte operations if needed. - - void (*i2eWriteWord)(struct _i2eBordStr *, unsigned short); - - // Waits specified time for the Transmit FIFO to go empty. Returns true if - // ok, otherwise returns false and error in i2eError. - - int (*i2eWaitForTxEmpty)(struct _i2eBordStr *, int); - - // Returns true or false according to whether the outgoing mailbox is empty. - - int (*i2eTxMailEmpty)(struct _i2eBordStr *); - - // Checks whether outgoing mailbox is empty. If so, sends mail and returns - // true. Otherwise returns false. - - int (*i2eTrySendMail)(struct _i2eBordStr *, unsigned char); - - // If no mail available, returns NO_MAIL_HERE, else returns the value in the - // mailbox (guaranteed can't be NO_MAIL_HERE). - - unsigned short (*i2eGetMail)(struct _i2eBordStr *); - - // Enables the board to interrupt the host when it writes to the mailbox. - // Irqs will not occur, however, until the loadware separately enables - // interrupt generation to the host. The standard loadware does this in - // response to a command packet sent by the host. (Also, disables - // any other potential interrupt sources from the board -- other than the - // inbound mailbox). - - void (*i2eEnableMailIrq)(struct _i2eBordStr *); - - // Writes an arbitrary value to the mask register. - - void (*i2eWriteMask)(struct _i2eBordStr *, unsigned char); - - - // State information - - // During downloading, indicates the number of blocks remaining to download - // to the board. - - short i2eToLoad; - - // State of board (see manifests below) (e.g., whether in reset condition, - // whether standard loadware is installed, etc. - - unsigned char i2eState; - - // These three fields are only valid when there is loadware running on the - // board. (i2eState == II_STATE_LOADED or i2eState == II_STATE_STDLOADED ) - - unsigned char i2eLVersion; // Loadware version - unsigned char i2eLRevision; // Loadware revision - unsigned char i2eLSub; // Loadware subrevision - - // Flags which only have meaning in the context of the standard loadware. - // Somewhat violates the layering concept, but there is so little additional - // needed at the board level (while much additional at the channel level), - // that this beats maintaining two different per-board structures. - - // Indicates which IRQ the board has been initialized (from software) to use - // For MicroChannel boards, any value different from IRQ_UNDEFINED means - // that the software command has been sent to enable interrupts (or specify - // they are disabled). Special value: IRQ_UNDEFINED indicates that the - // software command to select the interrupt has not yet been sent, therefore - // (since the standard loadware insists that it be sent before any other - // packets are sent) no other packets should be sent yet. - - unsigned short i2eUsingIrq; - - // This is set when we hit the MB_OUT_STUFFED mailbox, which prevents us - // putting more in the mailbox until an appropriate mailbox message is - // received. - - unsigned char i2eWaitingForEmptyFifo; - - // Any mailbox bits waiting to be sent to the board are OR'ed in here. - - unsigned char i2eOutMailWaiting; - - // The head of any incoming packet is read into here, is then examined and - // we dispatch accordingly. - - unsigned short i2eLeadoffWord[1]; - - // Running counter of interrupts where the mailbox indicated incoming data. - - unsigned short i2eFifoInInts; - - // Running counter of interrupts where the mailbox indicated outgoing data - // had been stripped. - - unsigned short i2eFifoOutInts; - - // If not void, gives the address of a routine to call if fatal board error - // is found (only applies to standard l/w). - - void (*i2eFatalTrap)(struct _i2eBordStr *); - - // Will point to an array of some sort of channel structures (whose format - // is unknown at this level, being a function of what loadware is - // installed and the code configuration (max sizes of buffers, etc.)). - - void *i2eChannelPtr; - - // Set indicates that the board has gone fatal. - - unsigned short i2eFatal; - - // The number of elements pointed to by i2eChannelPtr. - - unsigned short i2eChannelCnt; - - // Ring-buffers of channel structures whose channels have particular needs. - - rwlock_t Fbuf_spinlock; - volatile - unsigned short i2Fbuf_strip; // Strip index - volatile - unsigned short i2Fbuf_stuff; // Stuff index - void *i2Fbuf[CH_QUEUE_SIZE]; // An array of channel pointers - // of channels who need to send - // flow control packets. - rwlock_t Dbuf_spinlock; - volatile - unsigned short i2Dbuf_strip; // Strip index - volatile - unsigned short i2Dbuf_stuff; // Stuff index - void *i2Dbuf[CH_QUEUE_SIZE]; // An array of channel pointers - // of channels who need to send - // data or in-line command packets. - rwlock_t Bbuf_spinlock; - volatile - unsigned short i2Bbuf_strip; // Strip index - volatile - unsigned short i2Bbuf_stuff; // Stuff index - void *i2Bbuf[CH_QUEUE_SIZE]; // An array of channel pointers - // of channels who need to send - // bypass command packets. - - /* - * A set of flags to indicate that certain events have occurred on at least - * one of the ports on this board. We use this to decide whether to spin - * through the channels looking for breaks, etc. - */ - int got_input; - int status_change; - bidStat channelBtypes; - - /* - * Debugging counters, etc. - */ - unsigned long debugFlowQueued; - unsigned long debugInlineQueued; - unsigned long debugDataQueued; - unsigned long debugBypassQueued; - unsigned long debugFlowCount; - unsigned long debugInlineCount; - unsigned long debugBypassCount; - - rwlock_t read_fifo_spinlock; - rwlock_t write_fifo_spinlock; - -// For queuing interrupt bottom half handlers. /\/\|=mhw=|\/\/ - struct work_struct tqueue_interrupt; - - struct timer_list SendPendingTimer; // Used by iiSendPending - unsigned int SendPendingRetry; -} i2eBordStr, *i2eBordStrPtr; - -//------------------------------------------------------------------- -// Macro Definitions for the indirect calls defined in the i2eBordStr -//------------------------------------------------------------------- -// -#define iiDelay(a,b) (*(a)->i2eDelay)(b) -#define iiWriteBuf(a,b,c) (*(a)->i2eWriteBuf)(a,b,c) -#define iiReadBuf(a,b,c) (*(a)->i2eReadBuf)(a,b,c) - -#define iiWriteWord(a,b) (*(a)->i2eWriteWord)(a,b) -#define iiReadWord(a) (*(a)->i2eReadWord)(a) - -#define iiWaitForTxEmpty(a,b) (*(a)->i2eWaitForTxEmpty)(a,b) - -#define iiTxMailEmpty(a) (*(a)->i2eTxMailEmpty)(a) -#define iiTrySendMail(a,b) (*(a)->i2eTrySendMail)(a,b) - -#define iiGetMail(a) (*(a)->i2eGetMail)(a) -#define iiEnableMailIrq(a) (*(a)->i2eEnableMailIrq)(a) -#define iiDisableMailIrq(a) (*(a)->i2eWriteMask)(a,0) -#define iiWriteMask(a,b) (*(a)->i2eWriteMask)(a,b) - -//------------------------------------------- -// Manifests for i2eBordStr: -//------------------------------------------- - -typedef void (*delayFunc_t)(unsigned int); - -// i2eValid -// -#define I2E_MAGIC 0x4251 // Structure is valid. -#define I2E_INCOMPLETE 0x1122 // Structure failed during init. - - -// i2eError -// -#define I2EE_GOOD 0 // Operation successful -#define I2EE_BADADDR 1 // Address out of range -#define I2EE_BADSTATE 2 // Attempt to perform a function when the board - // structure was in the incorrect state -#define I2EE_BADMAGIC 3 // Bad magic number from Power On test (i2ePomSize - // reflects what was read -#define I2EE_PORM_SHORT 4 // Power On message too short -#define I2EE_PORM_LONG 5 // Power On message too long -#define I2EE_BAD_FAMILY 6 // Un-supported board family type -#define I2EE_INCONSIST 7 // Firmware reports something impossible, - // e.g. unexpected number of ports... Almost no - // excuse other than bad FIFO... -#define I2EE_POSTERR 8 // Power-On self test reported a bad error -#define I2EE_BADBUS 9 // Unknown Bus type declared in message -#define I2EE_TXE_TIME 10 // Timed out waiting for TX Fifo to empty -#define I2EE_INVALID 11 // i2eValid field does not indicate a valid and - // complete board structure (for functions which - // require this be so.) -#define I2EE_BAD_PORT 12 // Discrepancy between channels actually found and - // what the product is supposed to have. Check - // i2eGoodMap vs i2eChannelMap for details. -#define I2EE_BAD_IRQ 13 // Someone specified an unsupported IRQ -#define I2EE_NOCHANNELS 14 // No channel structures have been defined (for - // functions requiring this). - -// i2eFifoStyle -// -#define FIFO_II 0 /* IntelliPort-II style: see also i2hw.h */ -#define FIFO_IIEX 1 /* IntelliPort-IIEX style */ - -// i2eGetMail -// -#define NO_MAIL_HERE 0x1111 // Since mail is unsigned char, cannot possibly - // promote to 0x1111. -// i2eState -// -#define II_STATE_COLD 0 // Addresses have been defined, but board not even - // reset yet. -#define II_STATE_RESET 1 // Board,if it exists, has just been reset -#define II_STATE_READY 2 // Board ready for its first block -#define II_STATE_LOADING 3 // Board continuing load -#define II_STATE_LOADED 4 // Board has finished load: status ok -#define II_STATE_BADLOAD 5 // Board has finished load: failed! -#define II_STATE_STDLOADED 6 // Board has finished load: standard firmware - -// i2eUsingIrq -// -#define I2_IRQ_UNDEFINED 0x1352 /* No valid irq (or polling = 0) can - * ever promote to this! */ -//------------------------------------------ -// Handy Macros for i2ellis.c and others -// Note these are common to -II and -IIEX -//------------------------------------------ - -// Given a pointer to the board structure, does the input FIFO have any data or -// not? -// -#define I2_HAS_INPUT(pB) !(inb(pB->i2eStatus) & ST_IN_EMPTY) - -// Given a pointer to the board structure, is there anything in the incoming -// mailbox? -// -#define I2_HAS_MAIL(pB) (inb(pB->i2eStatus) & ST_IN_MAIL) - -#define I2_UPDATE_FIFO_ROOM(pB) ((pB)->i2eFifoRemains = (pB)->i2eFifoSize) - -//------------------------------------------ -// Function Declarations for i2ellis.c -//------------------------------------------ -// -// Functions called directly -// -// Initialization of a board & structure is in four (five!) parts: -// -// 1) iiSetAddress() - Define the board address & delay function for a board. -// 2) iiReset() - Reset the board (provided it exists) -// -- Note you may do this to several boards -- -// 3) iiResetDelay() - Delay for 2 seconds (once for all boards) -// 4) iiInitialize() - Attempt to read Power-up message; further initialize -// accelerators -// -// Then you may use iiDownloadAll() or iiDownloadFile() (in i2file.c) to write -// loadware. To change loadware, you must begin again with step 2, resetting -// the board again (step 1 not needed). - -static int iiSetAddress(i2eBordStrPtr, int, delayFunc_t ); -static int iiReset(i2eBordStrPtr); -static int iiResetDelay(i2eBordStrPtr); -static int iiInitialize(i2eBordStrPtr); - -// Routine to validate that all channels expected are there. -// -extern int iiValidateChannels(i2eBordStrPtr); - -// Routine used to download a block of loadware. -// -static int iiDownloadBlock(i2eBordStrPtr, loadHdrStrPtr, int); - -// Return values given by iiDownloadBlock, iiDownloadAll, iiDownloadFile: -// -#define II_DOWN_BADVALID 0 // board structure is invalid -#define II_DOWN_CONTINUING 1 // So far, so good, firmware expects more -#define II_DOWN_GOOD 2 // Download complete, CRC good -#define II_DOWN_BAD 3 // Download complete, but CRC bad -#define II_DOWN_BADFILE 4 // Bad magic number in loadware file -#define II_DOWN_BADSTATE 5 // Board is in an inappropriate state for - // downloading loadware. (see i2eState) -#define II_DOWN_TIMEOUT 6 // Timeout waiting for firmware -#define II_DOWN_OVER 7 // Too much data -#define II_DOWN_UNDER 8 // Not enough data -#define II_DOWN_NOFILE 9 // Loadware file not found - -// Routine to download an entire loadware module: Return values are a subset of -// iiDownloadBlock's, excluding, of course, II_DOWN_CONTINUING -// -static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int); - -// Many functions defined here return True if good, False otherwise, with an -// error code in i2eError field. Here is a handy macro for setting the error -// code and returning. -// -#define I2_COMPLETE(pB,code) do { \ - pB->i2eError = code; \ - return (code == I2EE_GOOD);\ - } while (0) - -#endif // I2ELLIS_H diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h deleted file mode 100644 index c0ba6c05f0cd..000000000000 --- a/drivers/char/ip2/i2hw.h +++ /dev/null @@ -1,652 +0,0 @@ -/******************************************************************************* -* -* (c) 1999 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Definitions limited to properties of the hardware or the -* bootstrap firmware. As such, they are applicable regardless of -* operating system or loadware (standard or diagnostic). -* -*******************************************************************************/ -#ifndef I2HW_H -#define I2HW_H 1 -//------------------------------------------------------------------------------ -// Revision History: -// -// 23 September 1991 MAG First Draft Started...through... -// 11 October 1991 ... Continuing development... -// 6 August 1993 Added support for ISA-4 (asic) which is architected -// as an ISA-CEX with a single 4-port box. -// -// 20 December 1996 AKM Version for Linux -// -//------------------------------------------------------------------------------ -/*------------------------------------------------------------------------------ - -HARDWARE DESCRIPTION: - -Introduction: - -The IntelliPort-II and IntelliPort-IIEX products occupy a block of eight (8) -addresses in the host's I/O space. - -Some addresses are used to transfer data to/from the board, some to transfer -so-called "mailbox" messages, and some to read bit-mapped status information. -While all the products in the line are functionally similar, some use a 16-bit -data path to transfer data while others use an 8-bit path. Also, the use of -command /status/mailbox registers differs slightly between the II and IIEX -branches of the family. - -The host determines what type of board it is dealing with by reading a string of -sixteen characters from the board. These characters are always placed in the -fifo by the board's local processor whenever the board is reset (either from -power-on or under software control) and are known as the "Power-on Reset -Message." In order that this message can be read from either type of board, the -hardware registers used in reading this message are the same. Once this message -has been read by the host, then it has the information required to operate. - -General Differences between boards: - -The greatest structural difference is between the -II and -IIEX families of -product. The -II boards use the Am4701 dual 512x8 bidirectional fifo to support -the data path, mailbox registers, and status registers. This chip contains some -features which are not used in the IntelliPort-II products; a description of -these is omitted here. Because of these many features, it contains many -registers, too many to access directly within a small address space. They are -accessed by first writing a value to a "pointer" register. This value selects -the register to be accessed. The next read or write to that address accesses -the selected register rather than the pointer register. - -The -IIEX boards use a proprietary design similar to the Am4701 in function. But -because of a simpler, more streamlined design it doesn't require so many -registers. This means they can be accessed directly in single operations rather -than through a pointer register. - -Besides these differences, there are differences in whether 8-bit or 16-bit -transfers are used to move data to the board. - -The -II boards are capable only of 8-bit data transfers, while the -IIEX boards -may be configured for either 8-bit or 16-bit data transfers. If the on-board DIP -switch #8 is ON, and the card has been installed in a 16-bit slot, 16-bit -transfers are supported (and will be expected by the standard loadware). The -on-board firmware can determine the position of the switch, and whether the -board is installed in a 16-bit slot; it supplies this information to the host as -part of the power-up reset message. - -The configuration switch (#8) and slot selection do not directly configure the -hardware. It is up to the on-board loadware and host-based drivers to act -according to the selected options. That is, loadware and drivers could be -written to perform 8-bit transfers regardless of the state of the DIP switch or -slot (and in a diagnostic environment might well do so). Likewise, 16-bit -transfers could be performed as long as the card is in a 16-bit slot. - -Note the slot selection and DIP switch selection are provided separately: a -board running in 8-bit mode in a 16-bit slot has a greater range of possible -interrupts to choose from; information of potential use to the host. - -All 8-bit data transfers are done in the same way, regardless of whether on a --II board or a -IIEX board. - -The host must consider two things then: 1) whether a -II or -IIEX product is -being used, and 2) whether an 8-bit or 16-bit data path is used. - -A further difference is that -II boards always have a 512-byte fifo operating in -each direction. -IIEX boards may use fifos of varying size; this size is -reported as part of the power-up message. - -I/O Map Of IntelliPort-II and IntelliPort-IIEX boards: -(Relative to the chosen base address) - -Addr R/W IntelliPort-II IntelliPort-IIEX ----- --- -------------- ---------------- -0 R/W Data Port (byte) Data Port (byte or word) -1 R/W (Not used) (MSB of word-wide data written to Data Port) -2 R Status Register Status Register -2 W Pointer Register Interrupt Mask Register -3 R/W (Not used) Mailbox Registers (6 bits: 11111100) -4,5 -- Reserved for future products -6 -- Reserved for future products -7 R Guaranteed to have no effect -7 W Hardware reset of board. - - -Rules: -All data transfers are performed using the even i/o address. If byte-wide data -transfers are being used, do INB/OUTB operations on the data port. If word-wide -transfers are used, do INW/OUTW operations. In some circumstances (such as -reading the power-up message) you will do INB from the data port, but in this -case the MSB of each word read is lost. When accessing all other unreserved -registers, use byte operations only. -------------------------------------------------------------------------------*/ - -//------------------------------------------------ -// Mandatory Includes: -//------------------------------------------------ -// -#include "ip2types.h" - -//------------------------------------------------------------------------- -// Manifests for the I/O map: -//------------------------------------------------------------------------- -// R/W: Data port (byte) for IntelliPort-II, -// R/W: Data port (byte or word) for IntelliPort-IIEX -// Incoming or outgoing data passes through a FIFO, the status of which is -// available in some of the bits in FIFO_STATUS. This (bidirectional) FIFO is -// the primary means of transferring data, commands, flow-control, and status -// information between the host and board. -// -#define FIFO_DATA 0 - -// Another way of passing information between the board and the host is -// through "mailboxes". Unlike a FIFO, a mailbox holds only a single byte of -// data. Writing data to the mailbox causes a status bit to be set, and -// potentially interrupting the intended receiver. The sender has some way to -// determine whether the data has been read yet; as soon as it has, it may send -// more. The mailboxes are handled differently on -II and -IIEX products, as -// suggested below. -//------------------------------------------------------------------------------ -// Read: Status Register for IntelliPort-II or -IIEX -// The presence of any bit set here will cause an interrupt to the host, -// provided the corresponding bit has been unmasked in the interrupt mask -// register. Furthermore, interrupts to the host are disabled globally until the -// loadware selects the irq line to use. With the exception of STN_MR, the bits -// remain set so long as the associated condition is true. -// -#define FIFO_STATUS 2 - -// Bit map of status bits which are identical for -II and -IIEX -// -#define ST_OUT_FULL 0x40 // Outbound FIFO full -#define ST_IN_EMPTY 0x20 // Inbound FIFO empty -#define ST_IN_MAIL 0x04 // Inbound Mailbox full - -// The following exists only on the Intelliport-IIEX, and indicates that the -// board has not read the last outgoing mailbox data yet. In the IntelliPort-II, -// the outgoing mailbox may be read back: a zero indicates the board has read -// the data. -// -#define STE_OUT_MAIL 0x80 // Outbound mailbox full (!) - -// The following bits are defined differently for -II and -IIEX boards. Code -// which relies on these bits will need to be functionally different for the two -// types of boards and should be generally avoided because of the additional -// complexity this creates: - -// Bit map of status bits only on -II - -// Fifo has been RESET (cleared when the status register is read). Note that -// this condition cannot be masked and would always interrupt the host, except -// that the hardware reset also disables interrupts globally from the board -// until re-enabled by loadware. This could also arise from the -// Am4701-supported command to reset the chip, but this command is generally not -// used here. -// -#define STN_MR 0x80 - -// See the AMD Am4701 data sheet for details on the following four bits. They -// are not presently used by Computone drivers. -// -#define STN_OUT_AF 0x10 // Outbound FIFO almost full (programmable) -#define STN_IN_AE 0x08 // Inbound FIFO almost empty (programmable) -#define STN_BD 0x02 // Inbound byte detected -#define STN_PE 0x01 // Parity/Framing condition detected - -// Bit-map of status bits only on -IIEX -// -#define STE_OUT_HF 0x10 // Outbound FIFO half full -#define STE_IN_HF 0x08 // Inbound FIFO half full -#define STE_IN_FULL 0x02 // Inbound FIFO full -#define STE_OUT_MT 0x01 // Outbound FIFO empty - -//------------------------------------------------------------------------------ - -// Intelliport-II -- Write Only: the pointer register. -// Values are written to this register to select the Am4701 internal register to -// be accessed on the next operation. -// -#define FIFO_PTR 0x02 - -// Values for the pointer register -// -#define SEL_COMMAND 0x1 // Selects the Am4701 command register - -// Some possible commands: -// -#define SEL_CMD_MR 0x80 // Am4701 command to reset the chip -#define SEL_CMD_SH 0x40 // Am4701 command to map the "other" port into the - // status register. -#define SEL_CMD_UNSH 0 // Am4701 command to "unshift": port maps into its - // own status register. -#define SEL_MASK 0x2 // Selects the Am4701 interrupt mask register. The - // interrupt mask register is bit-mapped to match - // the status register (FIFO_STATUS) except for - // STN_MR. (See above.) -#define SEL_BYTE_DET 0x3 // Selects the Am4701 byte-detect register. (Not - // normally used except in diagnostics.) -#define SEL_OUTMAIL 0x4 // Selects the outbound mailbox (R/W). Reading back - // a value of zero indicates that the mailbox has - // been read by the board and is available for more - // data./ Writing to the mailbox optionally - // interrupts the board, depending on the loadware's - // setting of its interrupt mask register. -#define SEL_AEAF 0x5 // Selects AE/AF threshold register. -#define SEL_INMAIL 0x6 // Selects the inbound mailbox (Read) - -//------------------------------------------------------------------------------ -// IntelliPort-IIEX -- Write Only: interrupt mask (and misc flags) register: -// Unlike IntelliPort-II, bit assignments do NOT match those of the status -// register. -// -#define FIFO_MASK 0x2 - -// Mailbox readback select: -// If set, reads to FIFO_MAIL will read the OUTBOUND mailbox (host to board). If -// clear (default on reset) reads to FIFO_MAIL will read the INBOUND mailbox. -// This is the normal situation. The clearing of a mailbox is determined on -// -IIEX boards by waiting for the STE_OUT_MAIL bit to clear. Readback -// capability is provided for diagnostic purposes only. -// -#define MX_OUTMAIL_RSEL 0x80 - -#define MX_IN_MAIL 0x40 // Enables interrupts when incoming mailbox goes - // full (ST_IN_MAIL set). -#define MX_IN_FULL 0x20 // Enables interrupts when incoming FIFO goes full - // (STE_IN_FULL). -#define MX_IN_MT 0x08 // Enables interrupts when incoming FIFO goes empty - // (ST_IN_MT). -#define MX_OUT_FULL 0x04 // Enables interrupts when outgoing FIFO goes full - // (ST_OUT_FULL). -#define MX_OUT_MT 0x01 // Enables interrupts when outgoing FIFO goes empty - // (STE_OUT_MT). - -// Any remaining bits are reserved, and should be written to ZERO for -// compatibility with future Computone products. - -//------------------------------------------------------------------------------ -// IntelliPort-IIEX: -- These are only 6-bit mailboxes !!! -- 11111100 (low two -// bits always read back 0). -// Read: One of the mailboxes, usually Inbound. -// Inbound Mailbox (MX_OUTMAIL_RSEL = 0) -// Outbound Mailbox (MX_OUTMAIL_RSEL = 1) -// Write: Outbound Mailbox -// For the IntelliPort-II boards, the outbound mailbox is read back to determine -// whether the board has read the data (0 --> data has been read). For the -// IntelliPort-IIEX, this is done by reading a status register. To determine -// whether mailbox is available for more outbound data, use the STE_OUT_MAIL bit -// in FIFO_STATUS. Moreover, although the Outbound Mailbox can be read back by -// setting MX_OUTMAIL_RSEL, it is NOT cleared when the board reads it, as is the -// case with the -II boards. For this reason, FIFO_MAIL is normally used to read -// the inbound FIFO, and MX_OUTMAIL_RSEL kept clear. (See above for -// MX_OUTMAIL_RSEL description.) -// -#define FIFO_MAIL 0x3 - -//------------------------------------------------------------------------------ -// WRITE ONLY: Resets the board. (Data doesn't matter). -// -#define FIFO_RESET 0x7 - -//------------------------------------------------------------------------------ -// READ ONLY: Will have no effect. (Data is undefined.) -// Actually, there will be an effect, in that the operation is sure to generate -// a bus cycle: viz., an I/O byte Read. This fact can be used to enforce short -// delays when no comparable time constant is available. -// -#define FIFO_NOP 0x7 - -//------------------------------------------------------------------------------ -// RESET & POWER-ON RESET MESSAGE -/*------------------------------------------------------------------------------ -RESET: - -The IntelliPort-II and -IIEX boards are reset in three ways: Power-up, channel -reset, and via a write to the reset register described above. For products using -the ISA bus, these three sources of reset are equvalent. For MCA and EISA buses, -the Power-up and channel reset sources cause additional hardware initialization -which should only occur at system startup time. - -The third type of reset, called a "command reset", is done by writing any data -to the FIFO_RESET address described above. This resets the on-board processor, -FIFO, UARTS, and associated hardware. - -This passes control of the board to the bootstrap firmware, which performs a -Power-On Self Test and which detects its current configuration. For example, --IIEX products determine the size of FIFO which has been installed, and the -number and type of expansion boxes attached. - -This and other information is then written to the FIFO in a 16-byte data block -to be read by the host. This block is guaranteed to be present within two (2) -seconds of having received the command reset. The firmware is now ready to -receive loadware from the host. - -It is good practice to perform a command reset to the board explicitly as part -of your software initialization. This allows your code to properly restart from -a soft boot. (Many systems do not issue channel reset on soft boot). - -Because of a hardware reset problem on some of the Cirrus Logic 1400's which are -used on the product, it is recommended that you reset the board twice, separated -by an approximately 50 milliseconds delay. (VERY approximately: probably ok to -be off by a factor of five. The important point is that the first command reset -in fact generates a reset pulse on the board. This pulse is guaranteed to last -less than 10 milliseconds. The additional delay ensures the 1400 has had the -chance to respond sufficiently to the first reset. Why not a longer delay? Much -more than 50 milliseconds gets to be noticable, but the board would still work. - -Once all 16 bytes of the Power-on Reset Message have been read, the bootstrap -firmware is ready to receive loadware. - -Note on Power-on Reset Message format: -The various fields have been designed with future expansion in view. -Combinations of bitfields and values have been defined which define products -which may not currently exist. This has been done to allow drivers to anticipate -the possible introduction of products in a systematic fashion. This is not -intended to suggest that each potential product is actually under consideration. -------------------------------------------------------------------------------*/ - -//---------------------------------------- -// Format of Power-on Reset Message -//---------------------------------------- - -typedef union _porStr // "por" stands for Power On Reset -{ - unsigned char c[16]; // array used when considering the message as a - // string of undifferentiated characters - - struct // Elements used when considering values - { - // The first two bytes out of the FIFO are two magic numbers. These are - // intended to establish that there is indeed a member of the - // IntelliPort-II(EX) family present. The remaining bytes may be - // expected // to be valid. When reading the Power-on Reset message, - // if the magic numbers do not match it is probably best to stop - // reading immediately. You are certainly not reading our board (unless - // hardware is faulty), and may in fact be reading some other piece of - // hardware. - - unsigned char porMagic1; // magic number: first byte == POR_MAGIC_1 - unsigned char porMagic2; // magic number: second byte == POR_MAGIC_2 - - // The Version, Revision, and Subrevision are stored as absolute numbers - // and would normally be displayed in the format V.R.S (e.g. 1.0.2) - - unsigned char porVersion; // Bootstrap firmware version number - unsigned char porRevision; // Bootstrap firmware revision number - unsigned char porSubRev; // Bootstrap firmware sub-revision number - - unsigned char porID; // Product ID: Bit-mapped according to - // conventions described below. Among other - // things, this allows us to distinguish - // IntelliPort-II boards from IntelliPort-IIEX - // boards. - - unsigned char porBus; // IntelliPort-II: Unused - // IntelliPort-IIEX: Bus Information: - // Bit-mapped below - - unsigned char porMemory; // On-board DRAM size: in 32k blocks - - // porPorts1 (and porPorts2) are used to determine the ports which are - // available to the board. For non-expandable product, a single number - // is sufficient. For expandable product, the board may be connected - // to as many as four boxes. Each box may be (so far) either a 16-port - // or an 8-port size. Whenever an 8-port box is used, the remaining 8 - // ports leave gaps between existing channels. For that reason, - // expandable products must report a MAP of available channels. Since - // each UART supports four ports, we represent each UART found by a - // single bit. Using two bytes to supply the mapping information we - // report the presense or absense of up to 16 UARTS, or 64 ports in - // steps of 4 ports. For -IIEX products, the ports are numbered - // starting at the box closest to the controller in the "chain". - - // Interpreted Differently for IntelliPort-II and -IIEX. - // -II: Number of ports (Derived actually from product ID). See - // Diag1&2 to indicate if uart was actually detected. - // -IIEX: Bit-map of UARTS found, LSB (see below for MSB of this). This - // bitmap is based on detecting the uarts themselves; - // see porFlags for information from the box i.d's. - unsigned char porPorts1; - - unsigned char porDiag1; // Results of on-board P.O.S.T, 1st byte - unsigned char porDiag2; // Results of on-board P.O.S.T, 2nd byte - unsigned char porSpeed; // Speed of local CPU: given as MHz x10 - // e.g., 16.0 MHz CPU is reported as 160 - unsigned char porFlags; // Misc information (see manifests below) - // Bit-mapped: CPU type, UART's present - - unsigned char porPorts2; // -II: Undefined - // -IIEX: Bit-map of UARTS found, MSB (see - // above for LSB) - - // IntelliPort-II: undefined - // IntelliPort-IIEX: 1 << porFifoSize gives the size, in bytes, of the - // host interface FIFO, in each direction. When running the -IIEX in - // 8-bit mode, fifo capacity is halved. The bootstrap firmware will - // have already accounted for this fact in generating this number. - unsigned char porFifoSize; - - // IntelliPort-II: undefined - // IntelliPort-IIEX: The number of boxes connected. (Presently 1-4) - unsigned char porNumBoxes; - } e; -} porStr, *porStrPtr; - -//-------------------------- -// Values for porStr fields -//-------------------------- - -//--------------------- -// porMagic1, porMagic2 -//---------------------- -// -#define POR_MAGIC_1 0x96 // The only valid value for porMagic1 -#define POR_MAGIC_2 0x35 // The only valid value for porMagic2 -#define POR_1_INDEX 0 // Byte position of POR_MAGIC_1 -#define POR_2_INDEX 1 // Ditto for POR_MAGIC_2 - -//---------------------- -// porID -//---------------------- -// -#define POR_ID_FAMILY 0xc0 // These bits indicate the general family of - // product. -#define POR_ID_FII 0x00 // Family is "IntelliPort-II" -#define POR_ID_FIIEX 0x40 // Family is "IntelliPort-IIEX" - -// These bits are reserved, presently zero. May be used at a later date to -// convey other product information. -// -#define POR_ID_RESERVED 0x3c - -#define POR_ID_SIZE 0x03 // Remaining bits indicate number of ports & - // Connector information. -#define POR_ID_II_8 0x00 // For IntelliPort-II, indicates 8-port using - // standard brick. -#define POR_ID_II_8R 0x01 // For IntelliPort-II, indicates 8-port using - // RJ11's (no CTS) -#define POR_ID_II_6 0x02 // For IntelliPort-II, indicates 6-port using - // RJ45's -#define POR_ID_II_4 0x03 // For IntelliPort-II, indicates 4-port using - // 4xRJ45 connectors -#define POR_ID_EX 0x00 // For IntelliPort-IIEX, indicates standard - // expandable controller (other values reserved) - -//---------------------- -// porBus -//---------------------- - -// IntelliPort-IIEX only: Board is installed in a 16-bit slot -// -#define POR_BUS_SLOT16 0x20 - -// IntelliPort-IIEX only: DIP switch #8 is on, selecting 16-bit host interface -// operation. -// -#define POR_BUS_DIP16 0x10 - -// Bits 0-2 indicate type of bus: This information is stored in the bootstrap -// loadware, different loadware being used on different products for different -// buses. For most situations, the drivers do not need this information; but it -// is handy in a diagnostic environment. For example, on microchannel boards, -// you would not want to try to test several interrupts, only the one for which -// you were configured. -// -#define POR_BUS_TYPE 0x07 - -// Unknown: this product doesn't know what bus it is running in. (e.g. if same -// bootstrap firmware were wanted for two different buses.) -// -#define POR_BUS_T_UNK 0 - -// Note: existing firmware for ISA-8 and MC-8 currently report the POR_BUS_T_UNK -// state, since the same bootstrap firmware is used for each. - -#define POR_BUS_T_MCA 1 // MCA BUS */ -#define POR_BUS_T_EISA 2 // EISA BUS */ -#define POR_BUS_T_ISA 3 // ISA BUS */ - -// Values 4-7 Reserved - -// Remaining bits are reserved - -//---------------------- -// porDiag1 -//---------------------- - -#define POR_BAD_MAPPER 0x80 // HW failure on P.O.S.T: Chip mapper failed - -// These two bits valid only for the IntelliPort-II -// -#define POR_BAD_UART1 0x01 // First 1400 bad -#define POR_BAD_UART2 0x02 // Second 1400 bad - -//---------------------- -// porDiag2 -//---------------------- - -#define POR_DEBUG_PORT 0x80 // debug port was detected by the P.O.S.T -#define POR_DIAG_OK 0x00 // Indicates passage: Failure codes not yet - // available. - // Other bits undefined. -//---------------------- -// porFlags -//---------------------- - -#define POR_CPU 0x03 // These bits indicate supposed CPU type -#define POR_CPU_8 0x01 // Board uses an 80188 (no such thing yet) -#define POR_CPU_6 0x02 // Board uses an 80186 (all existing products) -#define POR_CEX4 0x04 // If set, this is an ISA-CEX/4: An ISA-4 (asic) - // which is architected like an ISA-CEX connected - // to a (hitherto impossible) 4-port box. -#define POR_BOXES 0xf0 // Valid for IntelliPort-IIEX only: Map of Box - // sizes based on box I.D. -#define POR_BOX_16 0x10 // Set indicates 16-port, clear 8-port - -//------------------------------------- -// LOADWARE and DOWNLOADING CODE -//------------------------------------- - -/* -Loadware may be sent to the board in two ways: -1) It may be read from a (binary image) data file block by block as each block - is sent to the board. This is only possible when the initialization is - performed by code which can access your file system. This is most suitable - for diagnostics and appications which use the interface library directly. - -2) It may be hard-coded into your source by including a .h file (typically - supplied by Computone), which declares a data array and initializes every - element. This achieves the same result as if an entire loadware file had - been read into the array. - - This requires more data space in your program, but access to the file system - is not required. This method is more suited to driver code, which typically - is running at a level too low to access the file system directly. - -At present, loadware can only be generated at Computone. - -All Loadware begins with a header area which has a particular format. This -includes a magic number which identifies the file as being (purportedly) -loadware, CRC (for the loader), and version information. -*/ - - -//----------------------------------------------------------------------------- -// Format of loadware block -// -// This is defined as a union so we can pass a pointer to one of these items -// and (if it is the first block) pick out the version information, etc. -// -// Otherwise, to deal with this as a simple character array -//------------------------------------------------------------------------------ - -#define LOADWARE_BLOCK_SIZE 512 // Number of bytes in each block of loadware - -typedef union _loadHdrStr -{ - unsigned char c[LOADWARE_BLOCK_SIZE]; // Valid for every block - - struct // These fields are valid for only the first block of loadware. - { - unsigned char loadMagic; // Magic number: see below - unsigned char loadBlocksMore; // How many more blocks? - unsigned char loadCRC[2]; // Two CRC bytes: used by loader - unsigned char loadVersion; // Version number - unsigned char loadRevision; // Revision number - unsigned char loadSubRevision; // Sub-revision number - unsigned char loadSpares[9]; // Presently unused - unsigned char loadDates[32]; // Null-terminated string which can give - // date and time of compilation - } e; -} loadHdrStr, *loadHdrStrPtr; - -//------------------------------------ -// Defines for downloading code: -//------------------------------------ - -// The loadMagic field in the first block of the loadfile must be this, else the -// file is not valid. -// -#define MAGIC_LOADFILE 0x3c - -// How do we know the load was successful? On completion of the load, the -// bootstrap firmware returns a code to indicate whether it thought the download -// was valid and intends to execute it. These are the only possible valid codes: -// -#define LOADWARE_OK 0xc3 // Download was ok -#define LOADWARE_BAD 0x5a // Download was bad (CRC error) - -// Constants applicable to writing blocks of loadware: -// The first block of loadware might take 600 mS to load, in extreme cases. -// (Expandable board: worst case for sending startup messages to the LCD's). -// The 600mS figure is not really a calculation, but a conservative -// guess/guarantee. Usually this will be within 100 mS, like subsequent blocks. -// -#define MAX_DLOAD_START_TIME 1000 // 1000 mS -#define MAX_DLOAD_READ_TIME 100 // 100 mS - -// Firmware should respond with status (see above) within this long of host -// having sent the final block. -// -#define MAX_DLOAD_ACK_TIME 100 // 100 mS, again! - -//------------------------------------------------------ -// MAXIMUM NUMBER OF PORTS PER BOARD: -// This is fixed for now (with the expandable), but may -// be expanding according to even newer products. -//------------------------------------------------------ -// -#define ABS_MAX_BOXES 4 // Absolute most boxes per board -#define ABS_BIGGEST_BOX 16 // Absolute the most ports per box -#define ABS_MOST_PORTS (ABS_MAX_BOXES * ABS_BIGGEST_BOX) - -#define I2_OUTSW(port, addr, count) outsw((port), (addr), (((count)+1)/2)) -#define I2_OUTSB(port, addr, count) outsb((port), (addr), (((count)+1))&-2) -#define I2_INSW(port, addr, count) insw((port), (addr), (((count)+1)/2)) -#define I2_INSB(port, addr, count) insb((port), (addr), (((count)+1))&-2) - -#endif // I2HW_H - diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c deleted file mode 100644 index 0d10b89218ed..000000000000 --- a/drivers/char/ip2/i2lib.c +++ /dev/null @@ -1,2214 +0,0 @@ -/******************************************************************************* -* -* (c) 1999 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport -* serial I/O controllers. -* -* DESCRIPTION: High-level interface code for the device driver. Uses the -* Extremely Low Level Interface Support (i2ellis.c). Provides an -* interface to the standard loadware, to support drivers or -* application code. (This is included source code, not a separate -* compilation module.) -* -*******************************************************************************/ -//------------------------------------------------------------------------------ -// Note on Strategy: -// Once the board has been initialized, it will interrupt us when: -// 1) It has something in the fifo for us to read (incoming data, flow control -// packets, or whatever). -// 2) It has stripped whatever we have sent last time in the FIFO (and -// consequently is ready for more). -// -// Note also that the buffer sizes declared in i2lib.h are VERY SMALL. This -// worsens performance considerably, but is done so that a great many channels -// might use only a little memory. -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -// Revision History: -// -// 0.00 - 4/16/91 --- First Draft -// 0.01 - 4/29/91 --- 1st beta release -// 0.02 - 6/14/91 --- Changes to allow small model compilation -// 0.03 - 6/17/91 MAG Break reporting protected from interrupts routines with -// in-line asm added for moving data to/from ring buffers, -// replacing a variety of methods used previously. -// 0.04 - 6/21/91 MAG Initial flow-control packets not queued until -// i2_enable_interrupts time. Former versions would enqueue -// them at i2_init_channel time, before we knew how many -// channels were supposed to exist! -// 0.05 - 10/12/91 MAG Major changes: works through the ellis.c routines now; -// supports new 16-bit protocol and expandable boards. -// - 10/24/91 MAG Most changes in place and stable. -// 0.06 - 2/20/92 MAG Format of CMD_HOTACK corrected: the command takes no -// argument. -// 0.07 -- 3/11/92 MAG Support added to store special packet types at interrupt -// level (mostly responses to specific commands.) -// 0.08 -- 3/30/92 MAG Support added for STAT_MODEM packet -// 0.09 -- 6/24/93 MAG i2Link... needed to update number of boards BEFORE -// turning on the interrupt. -// 0.10 -- 6/25/93 MAG To avoid gruesome death from a bad board, we sanity check -// some incoming. -// -// 1.1 - 12/25/96 AKM Linux version. -// - 10/09/98 DMC Revised Linux version. -//------------------------------------------------------------------------------ - -//************ -//* Includes * -//************ - -#include -#include "i2lib.h" - - -//*********************** -//* Function Prototypes * -//*********************** -static void i2QueueNeeds(i2eBordStrPtr, i2ChanStrPtr, int); -static i2ChanStrPtr i2DeQueueNeeds(i2eBordStrPtr, int ); -static void i2StripFifo(i2eBordStrPtr); -static void i2StuffFifoBypass(i2eBordStrPtr); -static void i2StuffFifoFlow(i2eBordStrPtr); -static void i2StuffFifoInline(i2eBordStrPtr); -static int i2RetryFlushOutput(i2ChanStrPtr); - -// Not a documented part of the library routines (careful...) but the Diagnostic -// i2diag.c finds them useful to help the throughput in certain limited -// single-threaded operations. -static void iiSendPendingMail(i2eBordStrPtr); -static void serviceOutgoingFifo(i2eBordStrPtr); - -// Functions defined in ip2.c as part of interrupt handling -static void do_input(struct work_struct *); -static void do_status(struct work_struct *); - -//*************** -//* Debug Data * -//*************** -#ifdef DEBUG_FIFO - -unsigned char DBGBuf[0x4000]; -unsigned short I = 0; - -static void -WriteDBGBuf(char *s, unsigned char *src, unsigned short n ) -{ - char *p = src; - - // XXX: We need a spin lock here if we ever use this again - - while (*s) { // copy label - DBGBuf[I] = *s++; - I = I++ & 0x3fff; - } - while (n--) { // copy data - DBGBuf[I] = *p++; - I = I++ & 0x3fff; - } -} - -static void -fatality(i2eBordStrPtr pB ) -{ - int i; - - for (i=0;i= ' ' && DBGBuf[i] <= '~') { - printk(" %c ",DBGBuf[i]); - } else { - printk(" . "); - } - } - printk("\n"); - printk("Last index %x\n",I); -} -#endif /* DEBUG_FIFO */ - -//******** -//* Code * -//******** - -static inline int -i2Validate ( i2ChanStrPtr pCh ) -{ - //ip2trace(pCh->port_index, ITRC_VERIFY,ITRC_ENTER,2,pCh->validity, - // (CHANNEL_MAGIC | CHANNEL_SUPPORT)); - return ((pCh->validity & (CHANNEL_MAGIC_BITS | CHANNEL_SUPPORT)) - == (CHANNEL_MAGIC | CHANNEL_SUPPORT)); -} - -static void iiSendPendingMail_t(unsigned long data) -{ - i2eBordStrPtr pB = (i2eBordStrPtr)data; - - iiSendPendingMail(pB); -} - -//****************************************************************************** -// Function: iiSendPendingMail(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// If any outgoing mail bits are set and there is outgoing mailbox is empty, -// send the mail and clear the bits. -//****************************************************************************** -static void -iiSendPendingMail(i2eBordStrPtr pB) -{ - if (pB->i2eOutMailWaiting && (!pB->i2eWaitingForEmptyFifo) ) - { - if (iiTrySendMail(pB, pB->i2eOutMailWaiting)) - { - /* If we were already waiting for fifo to empty, - * or just sent MB_OUT_STUFFED, then we are - * still waiting for it to empty, until we should - * receive an MB_IN_STRIPPED from the board. - */ - pB->i2eWaitingForEmptyFifo |= - (pB->i2eOutMailWaiting & MB_OUT_STUFFED); - pB->i2eOutMailWaiting = 0; - pB->SendPendingRetry = 0; - } else { -/* The only time we hit this area is when "iiTrySendMail" has - failed. That only occurs when the outbound mailbox is - still busy with the last message. We take a short breather - to let the board catch up with itself and then try again. - 16 Retries is the limit - then we got a borked board. - /\/\|=mhw=|\/\/ */ - - if( ++pB->SendPendingRetry < 16 ) { - setup_timer(&pB->SendPendingTimer, - iiSendPendingMail_t, (unsigned long)pB); - mod_timer(&pB->SendPendingTimer, jiffies + 1); - } else { - printk( KERN_ERR "IP2: iiSendPendingMail unable to queue outbound mail\n" ); - } - } - } -} - -//****************************************************************************** -// Function: i2InitChannels(pB, nChannels, pCh) -// Parameters: Pointer to Ellis Board structure -// Number of channels to initialize -// Pointer to first element in an array of channel structures -// Returns: Success or failure -// -// Description: -// -// This function patches pointers, back-pointers, and initializes all the -// elements in the channel structure array. -// -// This should be run after the board structure is initialized, through having -// loaded the standard loadware (otherwise it complains). -// -// In any case, it must be done before any serious work begins initializing the -// irq's or sending commands... -// -//****************************************************************************** -static int -i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh) -{ - int index, stuffIndex; - i2ChanStrPtr *ppCh; - - if (pB->i2eValid != I2E_MAGIC) { - I2_COMPLETE(pB, I2EE_BADMAGIC); - } - if (pB->i2eState != II_STATE_STDLOADED) { - I2_COMPLETE(pB, I2EE_BADSTATE); - } - - rwlock_init(&pB->read_fifo_spinlock); - rwlock_init(&pB->write_fifo_spinlock); - rwlock_init(&pB->Dbuf_spinlock); - rwlock_init(&pB->Bbuf_spinlock); - rwlock_init(&pB->Fbuf_spinlock); - - // NO LOCK needed yet - this is init - - pB->i2eChannelPtr = pCh; - pB->i2eChannelCnt = nChannels; - - pB->i2Fbuf_strip = pB->i2Fbuf_stuff = 0; - pB->i2Dbuf_strip = pB->i2Dbuf_stuff = 0; - pB->i2Bbuf_strip = pB->i2Bbuf_stuff = 0; - - pB->SendPendingRetry = 0; - - memset ( pCh, 0, sizeof (i2ChanStr) * nChannels ); - - for (index = stuffIndex = 0, ppCh = (i2ChanStrPtr *)(pB->i2Fbuf); - nChannels && index < ABS_MOST_PORTS; - index++) - { - if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) { - continue; - } - rwlock_init(&pCh->Ibuf_spinlock); - rwlock_init(&pCh->Obuf_spinlock); - rwlock_init(&pCh->Cbuf_spinlock); - rwlock_init(&pCh->Pbuf_spinlock); - // NO LOCK needed yet - this is init - // Set up validity flag according to support level - if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) { - pCh->validity = CHANNEL_MAGIC | CHANNEL_SUPPORT; - } else { - pCh->validity = CHANNEL_MAGIC; - } - pCh->pMyBord = pB; /* Back-pointer */ - - // Prepare an outgoing flow-control packet to send as soon as the chance - // occurs. - if ( pCh->validity & CHANNEL_SUPPORT ) { - pCh->infl.hd.i2sChannel = index; - pCh->infl.hd.i2sCount = 5; - pCh->infl.hd.i2sType = PTYPE_BYPASS; - pCh->infl.fcmd = 37; - pCh->infl.asof = 0; - pCh->infl.room = IBUF_SIZE - 1; - - pCh->whenSendFlow = (IBUF_SIZE/5)*4; // when 80% full - - // The following is similar to calling i2QueueNeeds, except that this - // is done in longhand, since we are setting up initial conditions on - // many channels at once. - pCh->channelNeeds = NEED_FLOW; // Since starting from scratch - pCh->sinceLastFlow = 0; // No bytes received since last flow - // control packet was queued - stuffIndex++; - *ppCh++ = pCh; // List this channel as needing - // initial flow control packet sent - } - - // Don't allow anything to be sent until the status packets come in from - // the board. - - pCh->outfl.asof = 0; - pCh->outfl.room = 0; - - // Initialize all the ring buffers - - pCh->Ibuf_stuff = pCh->Ibuf_strip = 0; - pCh->Obuf_stuff = pCh->Obuf_strip = 0; - pCh->Cbuf_stuff = pCh->Cbuf_strip = 0; - - memset( &pCh->icount, 0, sizeof (struct async_icount) ); - pCh->hotKeyIn = HOT_CLEAR; - pCh->channelOptions = 0; - pCh->bookMarks = 0; - init_waitqueue_head(&pCh->pBookmarkWait); - - init_waitqueue_head(&pCh->open_wait); - init_waitqueue_head(&pCh->close_wait); - init_waitqueue_head(&pCh->delta_msr_wait); - - // Set base and divisor so default custom rate is 9600 - pCh->BaudBase = 921600; // MAX for ST654, changed after we get - pCh->BaudDivisor = 96; // the boxids (UART types) later - - pCh->dataSetIn = 0; - pCh->dataSetOut = 0; - - pCh->wopen = 0; - pCh->throttled = 0; - - pCh->speed = CBR_9600; - - pCh->flags = 0; - - pCh->ClosingDelay = 5*HZ/10; - pCh->ClosingWaitTime = 30*HZ; - - // Initialize task queue objects - INIT_WORK(&pCh->tqueue_input, do_input); - INIT_WORK(&pCh->tqueue_status, do_status); - -#ifdef IP2DEBUG_TRACE - pCh->trace = ip2trace; -#endif - - ++pCh; - --nChannels; - } - // No need to check for wrap here; this is initialization. - pB->i2Fbuf_stuff = stuffIndex; - I2_COMPLETE(pB, I2EE_GOOD); - -} - -//****************************************************************************** -// Function: i2DeQueueNeeds(pB, type) -// Parameters: Pointer to a board structure -// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW -// Returns: -// Pointer to a channel structure -// -// Description: Returns pointer struct of next channel that needs service of -// the type specified. Otherwise returns a NULL reference. -// -//****************************************************************************** -static i2ChanStrPtr -i2DeQueueNeeds(i2eBordStrPtr pB, int type) -{ - unsigned short queueIndex; - unsigned long flags; - - i2ChanStrPtr pCh = NULL; - - switch(type) { - - case NEED_INLINE: - - write_lock_irqsave(&pB->Dbuf_spinlock, flags); - if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip) - { - queueIndex = pB->i2Dbuf_strip; - pCh = pB->i2Dbuf[queueIndex]; - queueIndex++; - if (queueIndex >= CH_QUEUE_SIZE) { - queueIndex = 0; - } - pB->i2Dbuf_strip = queueIndex; - pCh->channelNeeds &= ~NEED_INLINE; - } - write_unlock_irqrestore(&pB->Dbuf_spinlock, flags); - break; - - case NEED_BYPASS: - - write_lock_irqsave(&pB->Bbuf_spinlock, flags); - if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip) - { - queueIndex = pB->i2Bbuf_strip; - pCh = pB->i2Bbuf[queueIndex]; - queueIndex++; - if (queueIndex >= CH_QUEUE_SIZE) { - queueIndex = 0; - } - pB->i2Bbuf_strip = queueIndex; - pCh->channelNeeds &= ~NEED_BYPASS; - } - write_unlock_irqrestore(&pB->Bbuf_spinlock, flags); - break; - - case NEED_FLOW: - - write_lock_irqsave(&pB->Fbuf_spinlock, flags); - if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip) - { - queueIndex = pB->i2Fbuf_strip; - pCh = pB->i2Fbuf[queueIndex]; - queueIndex++; - if (queueIndex >= CH_QUEUE_SIZE) { - queueIndex = 0; - } - pB->i2Fbuf_strip = queueIndex; - pCh->channelNeeds &= ~NEED_FLOW; - } - write_unlock_irqrestore(&pB->Fbuf_spinlock, flags); - break; - default: - printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type); - break; - } - return pCh; -} - -//****************************************************************************** -// Function: i2QueueNeeds(pB, pCh, type) -// Parameters: Pointer to a board structure -// Pointer to a channel structure -// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW -// Returns: Nothing -// -// Description: -// For each type of need selected, if the given channel is not already in the -// queue, adds it, and sets the flag indicating it is in the queue. -//****************************************************************************** -static void -i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type) -{ - unsigned short queueIndex; - unsigned long flags; - - // We turn off all the interrupts during this brief process, since the - // interrupt-level code might want to put things on the queue as well. - - switch (type) { - - case NEED_INLINE: - - write_lock_irqsave(&pB->Dbuf_spinlock, flags); - if ( !(pCh->channelNeeds & NEED_INLINE) ) - { - pCh->channelNeeds |= NEED_INLINE; - queueIndex = pB->i2Dbuf_stuff; - pB->i2Dbuf[queueIndex++] = pCh; - if (queueIndex >= CH_QUEUE_SIZE) - queueIndex = 0; - pB->i2Dbuf_stuff = queueIndex; - } - write_unlock_irqrestore(&pB->Dbuf_spinlock, flags); - break; - - case NEED_BYPASS: - - write_lock_irqsave(&pB->Bbuf_spinlock, flags); - if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS)) - { - pCh->channelNeeds |= NEED_BYPASS; - queueIndex = pB->i2Bbuf_stuff; - pB->i2Bbuf[queueIndex++] = pCh; - if (queueIndex >= CH_QUEUE_SIZE) - queueIndex = 0; - pB->i2Bbuf_stuff = queueIndex; - } - write_unlock_irqrestore(&pB->Bbuf_spinlock, flags); - break; - - case NEED_FLOW: - - write_lock_irqsave(&pB->Fbuf_spinlock, flags); - if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW)) - { - pCh->channelNeeds |= NEED_FLOW; - queueIndex = pB->i2Fbuf_stuff; - pB->i2Fbuf[queueIndex++] = pCh; - if (queueIndex >= CH_QUEUE_SIZE) - queueIndex = 0; - pB->i2Fbuf_stuff = queueIndex; - } - write_unlock_irqrestore(&pB->Fbuf_spinlock, flags); - break; - - case NEED_CREDIT: - pCh->channelNeeds |= NEED_CREDIT; - break; - default: - printk(KERN_ERR "i2QueueNeeds called with bad type:%x\n",type); - break; - } - return; -} - -//****************************************************************************** -// Function: i2QueueCommands(type, pCh, timeout, nCommands, pCs,...) -// Parameters: type - PTYPE_BYPASS or PTYPE_INLINE -// pointer to the channel structure -// maximum period to wait -// number of commands (n) -// n commands -// Returns: Number of commands sent, or -1 for error -// -// get board lock before calling -// -// Description: -// Queues up some commands to be sent to a channel. To send possibly several -// bypass or inline commands to the given channel. The timeout parameter -// indicates how many HUNDREDTHS OF SECONDS to wait until there is room: -// 0 = return immediately if no room, -ive = wait forever, +ive = number of -// 1/100 seconds to wait. Return values: -// -1 Some kind of nasty error: bad channel structure or invalid arguments. -// 0 No room to send all the commands -// (+) Number of commands sent -//****************************************************************************** -static int -i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands, - cmdSyntaxPtr pCs0,...) -{ - int totalsize = 0; - int blocksize; - int lastended; - cmdSyntaxPtr *ppCs; - cmdSyntaxPtr pCs; - int count; - int flag; - i2eBordStrPtr pB; - - unsigned short maxBlock; - unsigned short maxBuff; - short bufroom; - unsigned short stuffIndex; - unsigned char *pBuf; - unsigned char *pInsert; - unsigned char *pDest, *pSource; - unsigned short channel; - int cnt; - unsigned long flags = 0; - rwlock_t *lock_var_p = NULL; - - // Make sure the channel exists, otherwise do nothing - if ( !i2Validate ( pCh ) ) { - return -1; - } - - ip2trace (CHANN, ITRC_QUEUE, ITRC_ENTER, 0 ); - - pB = pCh->pMyBord; - - // Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT - if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == I2_IRQ_UNDEFINED) - return -2; - // If the board has gone fatal, return bad, and also hit the trap routine if - // it exists. - if (pB->i2eFatal) { - if ( pB->i2eFatalTrap ) { - (*(pB)->i2eFatalTrap)(pB); - } - return -3; - } - // Set up some variables, Which buffers are we using? How big are they? - switch(type) - { - case PTYPE_INLINE: - flag = INL; - maxBlock = MAX_OBUF_BLOCK; - maxBuff = OBUF_SIZE; - pBuf = pCh->Obuf; - break; - case PTYPE_BYPASS: - flag = BYP; - maxBlock = MAX_CBUF_BLOCK; - maxBuff = CBUF_SIZE; - pBuf = pCh->Cbuf; - break; - default: - return -4; - } - // Determine the total size required for all the commands - totalsize = blocksize = sizeof(i2CmdHeader); - lastended = 0; - ppCs = &pCs0; - for ( count = nCommands; count; count--, ppCs++) - { - pCs = *ppCs; - cnt = pCs->length; - // Will a new block be needed for this one? - // Two possible reasons: too - // big or previous command has to be at the end of a packet. - if ((blocksize + cnt > maxBlock) || lastended) { - blocksize = sizeof(i2CmdHeader); - totalsize += sizeof(i2CmdHeader); - } - totalsize += cnt; - blocksize += cnt; - - // If this command had to end a block, then we will make sure to - // account for it should there be any more blocks. - lastended = pCs->flags & END; - } - for (;;) { - // Make sure any pending flush commands go out before we add more data. - if ( !( pCh->flush_flags && i2RetryFlushOutput( pCh ) ) ) { - // How much room (this time through) ? - switch(type) { - case PTYPE_INLINE: - lock_var_p = &pCh->Obuf_spinlock; - write_lock_irqsave(lock_var_p, flags); - stuffIndex = pCh->Obuf_stuff; - bufroom = pCh->Obuf_strip - stuffIndex; - break; - case PTYPE_BYPASS: - lock_var_p = &pCh->Cbuf_spinlock; - write_lock_irqsave(lock_var_p, flags); - stuffIndex = pCh->Cbuf_stuff; - bufroom = pCh->Cbuf_strip - stuffIndex; - break; - default: - return -5; - } - if (--bufroom < 0) { - bufroom += maxBuff; - } - - ip2trace (CHANN, ITRC_QUEUE, 2, 1, bufroom ); - - // Check for overflow - if (totalsize <= bufroom) { - // Normal Expected path - We still hold LOCK - break; /* from for()- Enough room: goto proceed */ - } - ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize); - write_unlock_irqrestore(lock_var_p, flags); - } else - ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize); - - /* Prepare to wait for buffers to empty */ - serviceOutgoingFifo(pB); // Dump what we got - - if (timeout == 0) { - return 0; // Tired of waiting - } - if (timeout > 0) - timeout--; // So negative values == forever - - if (!in_interrupt()) { - schedule_timeout_interruptible(1); // short nap - } else { - // we cannot sched/sleep in interrupt silly - return 0; - } - if (signal_pending(current)) { - return 0; // Wake up! Time to die!!! - } - - ip2trace (CHANN, ITRC_QUEUE, 4, 0 ); - - } // end of for(;;) - - // At this point we have room and the lock - stick them in. - channel = pCh->infl.hd.i2sChannel; - pInsert = &pBuf[stuffIndex]; // Pointer to start of packet - pDest = CMD_OF(pInsert); // Pointer to start of command - - // When we start counting, the block is the size of the header - for (blocksize = sizeof(i2CmdHeader), count = nCommands, - lastended = 0, ppCs = &pCs0; - count; - count--, ppCs++) - { - pCs = *ppCs; // Points to command protocol structure - - // If this is a bookmark request command, post the fact that a bookmark - // request is pending. NOTE THIS TRICK ONLY WORKS BECAUSE CMD_BMARK_REQ - // has no parameters! The more general solution would be to reference - // pCs->cmd[0]. - if (pCs == CMD_BMARK_REQ) { - pCh->bookMarks++; - - ip2trace (CHANN, ITRC_DRAIN, 30, 1, pCh->bookMarks ); - - } - cnt = pCs->length; - - // If this command would put us over the maximum block size or - // if the last command had to be at the end of a block, we end - // the existing block here and start a new one. - if ((blocksize + cnt > maxBlock) || lastended) { - - ip2trace (CHANN, ITRC_QUEUE, 5, 0 ); - - PTYPE_OF(pInsert) = type; - CHANNEL_OF(pInsert) = channel; - // count here does not include the header - CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader); - stuffIndex += blocksize; - if(stuffIndex >= maxBuff) { - stuffIndex = 0; - pInsert = pBuf; - } - pInsert = &pBuf[stuffIndex]; // Pointer to start of next pkt - pDest = CMD_OF(pInsert); - blocksize = sizeof(i2CmdHeader); - } - // Now we know there is room for this one in the current block - - blocksize += cnt; // Total bytes in this command - pSource = pCs->cmd; // Copy the command into the buffer - while (cnt--) { - *pDest++ = *pSource++; - } - // If this command had to end a block, then we will make sure to account - // for it should there be any more blocks. - lastended = pCs->flags & END; - } // end for - // Clean up the final block by writing header, etc - - PTYPE_OF(pInsert) = type; - CHANNEL_OF(pInsert) = channel; - // count here does not include the header - CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader); - stuffIndex += blocksize; - if(stuffIndex >= maxBuff) { - stuffIndex = 0; - pInsert = pBuf; - } - // Updates the index, and post the need for service. When adding these to - // the queue of channels, we turn off the interrupt while doing so, - // because at interrupt level we might want to push a channel back to the - // end of the queue. - switch(type) - { - case PTYPE_INLINE: - pCh->Obuf_stuff = stuffIndex; // Store buffer pointer - write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - - pB->debugInlineQueued++; - // Add the channel pointer to list of channels needing service (first - // come...), if it's not already there. - i2QueueNeeds(pB, pCh, NEED_INLINE); - break; - - case PTYPE_BYPASS: - pCh->Cbuf_stuff = stuffIndex; // Store buffer pointer - write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags); - - pB->debugBypassQueued++; - // Add the channel pointer to list of channels needing service (first - // come...), if it's not already there. - i2QueueNeeds(pB, pCh, NEED_BYPASS); - break; - } - - ip2trace (CHANN, ITRC_QUEUE, ITRC_RETURN, 1, nCommands ); - - return nCommands; // Good status: number of commands sent -} - -//****************************************************************************** -// Function: i2GetStatus(pCh,resetBits) -// Parameters: Pointer to a channel structure -// Bit map of status bits to clear -// Returns: Bit map of current status bits -// -// Description: -// Returns the state of data set signals, and whether a break has been received, -// (see i2lib.h for bit-mapped result). resetBits is a bit-map of any status -// bits to be cleared: I2_BRK, I2_PAR, I2_FRA, I2_OVR,... These are cleared -// AFTER the condition is passed. If pCh does not point to a valid channel, -// returns -1 (which would be impossible otherwise. -//****************************************************************************** -static int -i2GetStatus(i2ChanStrPtr pCh, int resetBits) -{ - unsigned short status; - i2eBordStrPtr pB; - - ip2trace (CHANN, ITRC_STATUS, ITRC_ENTER, 2, pCh->dataSetIn, resetBits ); - - // Make sure the channel exists, otherwise do nothing */ - if ( !i2Validate ( pCh ) ) - return -1; - - pB = pCh->pMyBord; - - status = pCh->dataSetIn; - - // Clear any specified error bits: but note that only actual error bits can - // be cleared, regardless of the value passed. - if (resetBits) - { - pCh->dataSetIn &= ~(resetBits & (I2_BRK | I2_PAR | I2_FRA | I2_OVR)); - pCh->dataSetIn &= ~(I2_DDCD | I2_DCTS | I2_DDSR | I2_DRI); - } - - ip2trace (CHANN, ITRC_STATUS, ITRC_RETURN, 1, pCh->dataSetIn ); - - return status; -} - -//****************************************************************************** -// Function: i2Input(pChpDest,count) -// Parameters: Pointer to a channel structure -// Pointer to data buffer -// Number of bytes to read -// Returns: Number of bytes read, or -1 for error -// -// Description: -// Strips data from the input buffer and writes it to pDest. If there is a -// collosal blunder, (invalid structure pointers or the like), returns -1. -// Otherwise, returns the number of bytes read. -//****************************************************************************** -static int -i2Input(i2ChanStrPtr pCh) -{ - int amountToMove; - unsigned short stripIndex; - int count; - unsigned long flags = 0; - - ip2trace (CHANN, ITRC_INPUT, ITRC_ENTER, 0); - - // Ensure channel structure seems real - if ( !i2Validate( pCh ) ) { - count = -1; - goto i2Input_exit; - } - write_lock_irqsave(&pCh->Ibuf_spinlock, flags); - - // initialize some accelerators and private copies - stripIndex = pCh->Ibuf_strip; - - count = pCh->Ibuf_stuff - stripIndex; - - // If buffer is empty or requested data count was 0, (trivial case) return - // without any further thought. - if ( count == 0 ) { - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - goto i2Input_exit; - } - // Adjust for buffer wrap - if ( count < 0 ) { - count += IBUF_SIZE; - } - // Don't give more than can be taken by the line discipline - amountToMove = pCh->pTTY->receive_room; - if (count > amountToMove) { - count = amountToMove; - } - // How much could we copy without a wrap? - amountToMove = IBUF_SIZE - stripIndex; - - if (amountToMove > count) { - amountToMove = count; - } - // Move the first block - pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, - &(pCh->Ibuf[stripIndex]), NULL, amountToMove ); - // If we needed to wrap, do the second data move - if (count > amountToMove) { - pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, - pCh->Ibuf, NULL, count - amountToMove ); - } - // Bump and wrap the stripIndex all at once by the amount of data read. This - // method is good regardless of whether the data was in one or two pieces. - stripIndex += count; - if (stripIndex >= IBUF_SIZE) { - stripIndex -= IBUF_SIZE; - } - pCh->Ibuf_strip = stripIndex; - - // Update our flow control information and possibly queue ourselves to send - // it, depending on how much data has been stripped since the last time a - // packet was sent. - pCh->infl.asof += count; - - if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) { - pCh->sinceLastFlow -= pCh->whenSendFlow; - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW); - } else { - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - } - -i2Input_exit: - - ip2trace (CHANN, ITRC_INPUT, ITRC_RETURN, 1, count); - - return count; -} - -//****************************************************************************** -// Function: i2InputFlush(pCh) -// Parameters: Pointer to a channel structure -// Returns: Number of bytes stripped, or -1 for error -// -// Description: -// Strips any data from the input buffer. If there is a collosal blunder, -// (invalid structure pointers or the like), returns -1. Otherwise, returns the -// number of bytes stripped. -//****************************************************************************** -static int -i2InputFlush(i2ChanStrPtr pCh) -{ - int count; - unsigned long flags; - - // Ensure channel structure seems real - if ( !i2Validate ( pCh ) ) - return -1; - - ip2trace (CHANN, ITRC_INPUT, 10, 0); - - write_lock_irqsave(&pCh->Ibuf_spinlock, flags); - count = pCh->Ibuf_stuff - pCh->Ibuf_strip; - - // Adjust for buffer wrap - if (count < 0) { - count += IBUF_SIZE; - } - - // Expedient way to zero out the buffer - pCh->Ibuf_strip = pCh->Ibuf_stuff; - - - // Update our flow control information and possibly queue ourselves to send - // it, depending on how much data has been stripped since the last time a - // packet was sent. - - pCh->infl.asof += count; - - if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow ) - { - pCh->sinceLastFlow -= pCh->whenSendFlow; - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW); - } else { - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - } - - ip2trace (CHANN, ITRC_INPUT, 19, 1, count); - - return count; -} - -//****************************************************************************** -// Function: i2InputAvailable(pCh) -// Parameters: Pointer to a channel structure -// Returns: Number of bytes available, or -1 for error -// -// Description: -// If there is a collosal blunder, (invalid structure pointers or the like), -// returns -1. Otherwise, returns the number of bytes stripped. Otherwise, -// returns the number of bytes available in the buffer. -//****************************************************************************** -#if 0 -static int -i2InputAvailable(i2ChanStrPtr pCh) -{ - int count; - - // Ensure channel structure seems real - if ( !i2Validate ( pCh ) ) return -1; - - - // initialize some accelerators and private copies - read_lock_irqsave(&pCh->Ibuf_spinlock, flags); - count = pCh->Ibuf_stuff - pCh->Ibuf_strip; - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - - // Adjust for buffer wrap - if (count < 0) - { - count += IBUF_SIZE; - } - - return count; -} -#endif - -//****************************************************************************** -// Function: i2Output(pCh, pSource, count) -// Parameters: Pointer to channel structure -// Pointer to source data -// Number of bytes to send -// Returns: Number of bytes sent, or -1 for error -// -// Description: -// Queues the data at pSource to be sent as data packets to the board. If there -// is a collosal blunder, (invalid structure pointers or the like), returns -1. -// Otherwise, returns the number of bytes written. What if there is not enough -// room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then -// we transfer as many characters as we can now, then return. If this bit is -// clear (default), routine will spin along until all the data is buffered. -// Should this occur, the 1-ms delay routine is called while waiting to avoid -// applications that one cannot break out of. -//****************************************************************************** -static int -i2Output(i2ChanStrPtr pCh, const char *pSource, int count) -{ - i2eBordStrPtr pB; - unsigned char *pInsert; - int amountToMove; - int countOriginal = count; - unsigned short channel; - unsigned short stuffIndex; - unsigned long flags; - - int bailout = 10; - - ip2trace (CHANN, ITRC_OUTPUT, ITRC_ENTER, 2, count, 0 ); - - // Ensure channel structure seems real - if ( !i2Validate ( pCh ) ) - return -1; - - // initialize some accelerators and private copies - pB = pCh->pMyBord; - channel = pCh->infl.hd.i2sChannel; - - // If the board has gone fatal, return bad, and also hit the trap routine if - // it exists. - if (pB->i2eFatal) { - if (pB->i2eFatalTrap) { - (*(pB)->i2eFatalTrap)(pB); - } - return -1; - } - // Proceed as though we would do everything - while ( count > 0 ) { - - // How much room in output buffer is there? - read_lock_irqsave(&pCh->Obuf_spinlock, flags); - amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1; - read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - if (amountToMove < 0) { - amountToMove += OBUF_SIZE; - } - // Subtract off the headers size and see how much room there is for real - // data. If this is negative, we will discover later. - amountToMove -= sizeof (i2DataHeader); - - // Don't move more (now) than can go in a single packet - if ( amountToMove > (int)(MAX_OBUF_BLOCK - sizeof(i2DataHeader)) ) { - amountToMove = MAX_OBUF_BLOCK - sizeof(i2DataHeader); - } - // Don't move more than the count we were given - if (amountToMove > count) { - amountToMove = count; - } - // Now we know how much we must move: NB because the ring buffers have - // an overflow area at the end, we needn't worry about wrapping in the - // middle of a packet. - -// Small WINDOW here with no LOCK but I can't call Flush with LOCK -// We would be flushing (or ending flush) anyway - - ip2trace (CHANN, ITRC_OUTPUT, 10, 1, amountToMove ); - - if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) ) - && amountToMove > 0 ) - { - write_lock_irqsave(&pCh->Obuf_spinlock, flags); - stuffIndex = pCh->Obuf_stuff; - - // Had room to move some data: don't know whether the block size, - // buffer space, or what was the limiting factor... - pInsert = &(pCh->Obuf[stuffIndex]); - - // Set up the header - CHANNEL_OF(pInsert) = channel; - PTYPE_OF(pInsert) = PTYPE_DATA; - TAG_OF(pInsert) = 0; - ID_OF(pInsert) = ID_ORDINARY_DATA; - DATA_COUNT_OF(pInsert) = amountToMove; - - // Move the data - memcpy( (char*)(DATA_OF(pInsert)), pSource, amountToMove ); - // Adjust pointers and indices - pSource += amountToMove; - pCh->Obuf_char_count += amountToMove; - stuffIndex += amountToMove + sizeof(i2DataHeader); - count -= amountToMove; - - if (stuffIndex >= OBUF_SIZE) { - stuffIndex = 0; - } - pCh->Obuf_stuff = stuffIndex; - - write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - - ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex ); - - } else { - - // Cannot move data - // becuz we need to stuff a flush - // or amount to move is <= 0 - - ip2trace(CHANN, ITRC_OUTPUT, 14, 3, - amountToMove, pB->i2eFifoRemains, - pB->i2eWaitingForEmptyFifo ); - - // Put this channel back on queue - // this ultimatly gets more data or wakes write output - i2QueueNeeds(pB, pCh, NEED_INLINE); - - if ( pB->i2eWaitingForEmptyFifo ) { - - ip2trace (CHANN, ITRC_OUTPUT, 16, 0 ); - - // or schedule - if (!in_interrupt()) { - - ip2trace (CHANN, ITRC_OUTPUT, 61, 0 ); - - schedule_timeout_interruptible(2); - if (signal_pending(current)) { - break; - } - continue; - } else { - - ip2trace (CHANN, ITRC_OUTPUT, 62, 0 ); - - // let interrupt in = WAS restore_flags() - // We hold no lock nor is irq off anymore??? - - break; - } - break; // from while(count) - } - else if ( pB->i2eFifoRemains < 32 && !pB->i2eTxMailEmpty ( pB ) ) - { - ip2trace (CHANN, ITRC_OUTPUT, 19, 2, - pB->i2eFifoRemains, - pB->i2eTxMailEmpty ); - - break; // from while(count) - } else if ( pCh->channelNeeds & NEED_CREDIT ) { - - ip2trace (CHANN, ITRC_OUTPUT, 22, 0 ); - - break; // from while(count) - } else if ( --bailout) { - - // Try to throw more things (maybe not us) in the fifo if we're - // not already waiting for it. - - ip2trace (CHANN, ITRC_OUTPUT, 20, 0 ); - - serviceOutgoingFifo(pB); - //break; CONTINUE; - } else { - ip2trace (CHANN, ITRC_OUTPUT, 21, 3, - pB->i2eFifoRemains, - pB->i2eOutMailWaiting, - pB->i2eWaitingForEmptyFifo ); - - break; // from while(count) - } - } - } // End of while(count) - - i2QueueNeeds(pB, pCh, NEED_INLINE); - - // We drop through either when the count expires, or when there is some - // count left, but there was a non-blocking write. - if (countOriginal > count) { - - ip2trace (CHANN, ITRC_OUTPUT, 17, 2, countOriginal, count ); - - serviceOutgoingFifo( pB ); - } - - ip2trace (CHANN, ITRC_OUTPUT, ITRC_RETURN, 2, countOriginal, count ); - - return countOriginal - count; -} - -//****************************************************************************** -// Function: i2FlushOutput(pCh) -// Parameters: Pointer to a channel structure -// Returns: Nothing -// -// Description: -// Sends bypass command to start flushing (waiting possibly forever until there -// is room), then sends inline command to stop flushing output, (again waiting -// possibly forever). -//****************************************************************************** -static inline void -i2FlushOutput(i2ChanStrPtr pCh) -{ - - ip2trace (CHANN, ITRC_FLUSH, 1, 1, pCh->flush_flags ); - - if (pCh->flush_flags) - return; - - if ( 1 != i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) { - pCh->flush_flags = STARTFL_FLAG; // Failed - flag for later - - ip2trace (CHANN, ITRC_FLUSH, 2, 0 ); - - } else if ( 1 != i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL) ) { - pCh->flush_flags = STOPFL_FLAG; // Failed - flag for later - - ip2trace (CHANN, ITRC_FLUSH, 3, 0 ); - } -} - -static int -i2RetryFlushOutput(i2ChanStrPtr pCh) -{ - int old_flags = pCh->flush_flags; - - ip2trace (CHANN, ITRC_FLUSH, 14, 1, old_flags ); - - pCh->flush_flags = 0; // Clear flag so we can avoid recursion - // and queue the commands - - if ( old_flags & STARTFL_FLAG ) { - if ( 1 == i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) { - old_flags = STOPFL_FLAG; //Success - send stop flush - } else { - old_flags = STARTFL_FLAG; //Failure - Flag for retry later - } - - ip2trace (CHANN, ITRC_FLUSH, 15, 1, old_flags ); - - } - if ( old_flags & STOPFL_FLAG ) { - if (1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL)) { - old_flags = 0; // Success - clear flags - } - - ip2trace (CHANN, ITRC_FLUSH, 16, 1, old_flags ); - } - pCh->flush_flags = old_flags; - - ip2trace (CHANN, ITRC_FLUSH, 17, 1, old_flags ); - - return old_flags; -} - -//****************************************************************************** -// Function: i2DrainOutput(pCh,timeout) -// Parameters: Pointer to a channel structure -// Maximum period to wait -// Returns: ? -// -// Description: -// Uses the bookmark request command to ask the board to send a bookmark back as -// soon as all the data is completely sent. -//****************************************************************************** -static void -i2DrainWakeup(unsigned long d) -{ - i2ChanStrPtr pCh = (i2ChanStrPtr)d; - - ip2trace (CHANN, ITRC_DRAIN, 10, 1, pCh->BookmarkTimer.expires ); - - pCh->BookmarkTimer.expires = 0; - wake_up_interruptible( &pCh->pBookmarkWait ); -} - -static void -i2DrainOutput(i2ChanStrPtr pCh, int timeout) -{ - wait_queue_t wait; - i2eBordStrPtr pB; - - ip2trace (CHANN, ITRC_DRAIN, ITRC_ENTER, 1, pCh->BookmarkTimer.expires); - - pB = pCh->pMyBord; - // If the board has gone fatal, return bad, - // and also hit the trap routine if it exists. - if (pB->i2eFatal) { - if (pB->i2eFatalTrap) { - (*(pB)->i2eFatalTrap)(pB); - } - return; - } - if ((timeout > 0) && (pCh->BookmarkTimer.expires == 0 )) { - // One per customer (channel) - setup_timer(&pCh->BookmarkTimer, i2DrainWakeup, - (unsigned long)pCh); - - ip2trace (CHANN, ITRC_DRAIN, 1, 1, pCh->BookmarkTimer.expires ); - - mod_timer(&pCh->BookmarkTimer, jiffies + timeout); - } - - i2QueueCommands( PTYPE_INLINE, pCh, -1, 1, CMD_BMARK_REQ ); - - init_waitqueue_entry(&wait, current); - add_wait_queue(&(pCh->pBookmarkWait), &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - serviceOutgoingFifo( pB ); - - schedule(); // Now we take our interruptible sleep on - - // Clean up the queue - set_current_state( TASK_RUNNING ); - remove_wait_queue(&(pCh->pBookmarkWait), &wait); - - // if expires == 0 then timer poped, then do not need to del_timer - if ((timeout > 0) && pCh->BookmarkTimer.expires && - time_before(jiffies, pCh->BookmarkTimer.expires)) { - del_timer( &(pCh->BookmarkTimer) ); - pCh->BookmarkTimer.expires = 0; - - ip2trace (CHANN, ITRC_DRAIN, 3, 1, pCh->BookmarkTimer.expires ); - - } - ip2trace (CHANN, ITRC_DRAIN, ITRC_RETURN, 1, pCh->BookmarkTimer.expires ); - return; -} - -//****************************************************************************** -// Function: i2OutputFree(pCh) -// Parameters: Pointer to a channel structure -// Returns: Space in output buffer -// -// Description: -// Returns -1 if very gross error. Otherwise returns the amount of bytes still -// free in the output buffer. -//****************************************************************************** -static int -i2OutputFree(i2ChanStrPtr pCh) -{ - int amountToMove; - unsigned long flags; - - // Ensure channel structure seems real - if ( !i2Validate ( pCh ) ) { - return -1; - } - read_lock_irqsave(&pCh->Obuf_spinlock, flags); - amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1; - read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - - if (amountToMove < 0) { - amountToMove += OBUF_SIZE; - } - // If this is negative, we will discover later - amountToMove -= sizeof(i2DataHeader); - - return (amountToMove < 0) ? 0 : amountToMove; -} -static void - -ip2_owake( PTTY tp) -{ - i2ChanStrPtr pCh; - - if (tp == NULL) return; - - pCh = tp->driver_data; - - ip2trace (CHANN, ITRC_SICMD, 10, 2, tp->flags, - (1 << TTY_DO_WRITE_WAKEUP) ); - - tty_wakeup(tp); -} - -static inline void -set_baud_params(i2eBordStrPtr pB) -{ - int i,j; - i2ChanStrPtr *pCh; - - pCh = (i2ChanStrPtr *) pB->i2eChannelPtr; - - for (i = 0; i < ABS_MAX_BOXES; i++) { - if (pB->channelBtypes.bid_value[i]) { - if (BID_HAS_654(pB->channelBtypes.bid_value[i])) { - for (j = 0; j < ABS_BIGGEST_BOX; j++) { - if (pCh[i*16+j] == NULL) - break; - (pCh[i*16+j])->BaudBase = 921600; // MAX for ST654 - (pCh[i*16+j])->BaudDivisor = 96; - } - } else { // has cirrus cd1400 - for (j = 0; j < ABS_BIGGEST_BOX; j++) { - if (pCh[i*16+j] == NULL) - break; - (pCh[i*16+j])->BaudBase = 115200; // MAX for CD1400 - (pCh[i*16+j])->BaudDivisor = 12; - } - } - } - } -} - -//****************************************************************************** -// Function: i2StripFifo(pB) -// Parameters: Pointer to a board structure -// Returns: ? -// -// Description: -// Strips all the available data from the incoming FIFO, identifies the type of -// packet, and either buffers the data or does what needs to be done. -// -// Note there is no overflow checking here: if the board sends more data than it -// ought to, we will not detect it here, but blindly overflow... -//****************************************************************************** - -// A buffer for reading in blocks for unknown channels -static unsigned char junkBuffer[IBUF_SIZE]; - -// A buffer to read in a status packet. Because of the size of the count field -// for these things, the maximum packet size must be less than MAX_CMD_PACK_SIZE -static unsigned char cmdBuffer[MAX_CMD_PACK_SIZE + 4]; - -// This table changes the bit order from MSR order given by STAT_MODEM packet to -// status bits used in our library. -static char xlatDss[16] = { -0 | 0 | 0 | 0 , -0 | 0 | 0 | I2_CTS , -0 | 0 | I2_DSR | 0 , -0 | 0 | I2_DSR | I2_CTS , -0 | I2_RI | 0 | 0 , -0 | I2_RI | 0 | I2_CTS , -0 | I2_RI | I2_DSR | 0 , -0 | I2_RI | I2_DSR | I2_CTS , -I2_DCD | 0 | 0 | 0 , -I2_DCD | 0 | 0 | I2_CTS , -I2_DCD | 0 | I2_DSR | 0 , -I2_DCD | 0 | I2_DSR | I2_CTS , -I2_DCD | I2_RI | 0 | 0 , -I2_DCD | I2_RI | 0 | I2_CTS , -I2_DCD | I2_RI | I2_DSR | 0 , -I2_DCD | I2_RI | I2_DSR | I2_CTS }; - -static inline void -i2StripFifo(i2eBordStrPtr pB) -{ - i2ChanStrPtr pCh; - int channel; - int count; - unsigned short stuffIndex; - int amountToRead; - unsigned char *pc, *pcLimit; - unsigned char uc; - unsigned char dss_change; - unsigned long bflags,cflags; - -// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 ); - - while (I2_HAS_INPUT(pB)) { -// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 ); - - // Process packet from fifo a one atomic unit - write_lock_irqsave(&pB->read_fifo_spinlock, bflags); - - // The first word (or two bytes) will have channel number and type of - // packet, possibly other information - pB->i2eLeadoffWord[0] = iiReadWord(pB); - - switch(PTYPE_OF(pB->i2eLeadoffWord)) - { - case PTYPE_DATA: - pB->got_input = 1; - -// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 3, 0 ); - - channel = CHANNEL_OF(pB->i2eLeadoffWord); /* Store channel */ - count = iiReadWord(pB); /* Count is in the next word */ - -// NEW: Check the count for sanity! Should the hardware fail, our death -// is more pleasant. While an oversize channel is acceptable (just more -// than the driver supports), an over-length count clearly means we are -// sick! - if ( ((unsigned int)count) > IBUF_SIZE ) { - pB->i2eFatal = 2; - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - return; /* Bail out ASAP */ - } - // Channel is illegally big ? - if ((channel >= pB->i2eChannelCnt) || - (NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel]))) - { - iiReadBuf(pB, junkBuffer, count); - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - break; /* From switch: ready for next packet */ - } - - // Channel should be valid, then - - // If this is a hot-key, merely post its receipt for now. These are - // always supposed to be 1-byte packets, so we won't even check the - // count. Also we will post an acknowledgement to the board so that - // more data can be forthcoming. Note that we are not trying to use - // these sequences in this driver, merely to robustly ignore them. - if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY) - { - pCh->hotKeyIn = iiReadWord(pB) & 0xff; - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK); - break; /* From the switch: ready for next packet */ - } - - // Normal data! We crudely assume there is room for the data in our - // buffer because the board wouldn't have exceeded his credit limit. - write_lock_irqsave(&pCh->Ibuf_spinlock, cflags); - // We have 2 locks now - stuffIndex = pCh->Ibuf_stuff; - amountToRead = IBUF_SIZE - stuffIndex; - if (amountToRead > count) - amountToRead = count; - - // stuffIndex would have been already adjusted so there would - // always be room for at least one, and count is always at least - // one. - - iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead); - pCh->icount.rx += amountToRead; - - // Update the stuffIndex by the amount of data moved. Note we could - // never ask for more data than would just fit. However, we might - // have read in one more byte than we wanted because the read - // rounds up to even bytes. If this byte is on the end of the - // packet, and is padding, we ignore it. If the byte is part of - // the actual data, we need to move it. - - stuffIndex += amountToRead; - - if (stuffIndex >= IBUF_SIZE) { - if ((amountToRead & 1) && (count > amountToRead)) { - pCh->Ibuf[0] = pCh->Ibuf[IBUF_SIZE]; - amountToRead++; - stuffIndex = 1; - } else { - stuffIndex = 0; - } - } - - // If there is anything left over, read it as well - if (count > amountToRead) { - amountToRead = count - amountToRead; - iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead); - pCh->icount.rx += amountToRead; - stuffIndex += amountToRead; - } - - // Update stuff index - pCh->Ibuf_stuff = stuffIndex; - write_unlock_irqrestore(&pCh->Ibuf_spinlock, cflags); - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - -#ifdef USE_IQ - schedule_work(&pCh->tqueue_input); -#else - do_input(&pCh->tqueue_input); -#endif - - // Note we do not need to maintain any flow-control credits at this - // time: if we were to increment .asof and decrement .room, there - // would be no net effect. Instead, when we strip data, we will - // increment .asof and leave .room unchanged. - - break; // From switch: ready for next packet - - case PTYPE_STATUS: - ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 4, 0 ); - - count = CMD_COUNT_OF(pB->i2eLeadoffWord); - - iiReadBuf(pB, cmdBuffer, count); - // We can release early with buffer grab - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - - pc = cmdBuffer; - pcLimit = &(cmdBuffer[count]); - - while (pc < pcLimit) { - channel = *pc++; - - ip2trace (channel, ITRC_SFIFO, 7, 2, channel, *pc ); - - /* check for valid channel */ - if (channel < pB->i2eChannelCnt - && - (pCh = (((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])) != NULL - ) - { - dss_change = 0; - - switch (uc = *pc++) - { - /* Breaks and modem signals are easy: just update status */ - case STAT_CTS_UP: - if ( !(pCh->dataSetIn & I2_CTS) ) - { - pCh->dataSetIn |= I2_DCTS; - pCh->icount.cts++; - dss_change = 1; - } - pCh->dataSetIn |= I2_CTS; - break; - - case STAT_CTS_DN: - if ( pCh->dataSetIn & I2_CTS ) - { - pCh->dataSetIn |= I2_DCTS; - pCh->icount.cts++; - dss_change = 1; - } - pCh->dataSetIn &= ~I2_CTS; - break; - - case STAT_DCD_UP: - ip2trace (channel, ITRC_MODEM, 1, 1, pCh->dataSetIn ); - - if ( !(pCh->dataSetIn & I2_DCD) ) - { - ip2trace (CHANN, ITRC_MODEM, 2, 0 ); - pCh->dataSetIn |= I2_DDCD; - pCh->icount.dcd++; - dss_change = 1; - } - pCh->dataSetIn |= I2_DCD; - - ip2trace (channel, ITRC_MODEM, 3, 1, pCh->dataSetIn ); - break; - - case STAT_DCD_DN: - ip2trace (channel, ITRC_MODEM, 4, 1, pCh->dataSetIn ); - if ( pCh->dataSetIn & I2_DCD ) - { - ip2trace (channel, ITRC_MODEM, 5, 0 ); - pCh->dataSetIn |= I2_DDCD; - pCh->icount.dcd++; - dss_change = 1; - } - pCh->dataSetIn &= ~I2_DCD; - - ip2trace (channel, ITRC_MODEM, 6, 1, pCh->dataSetIn ); - break; - - case STAT_DSR_UP: - if ( !(pCh->dataSetIn & I2_DSR) ) - { - pCh->dataSetIn |= I2_DDSR; - pCh->icount.dsr++; - dss_change = 1; - } - pCh->dataSetIn |= I2_DSR; - break; - - case STAT_DSR_DN: - if ( pCh->dataSetIn & I2_DSR ) - { - pCh->dataSetIn |= I2_DDSR; - pCh->icount.dsr++; - dss_change = 1; - } - pCh->dataSetIn &= ~I2_DSR; - break; - - case STAT_RI_UP: - if ( !(pCh->dataSetIn & I2_RI) ) - { - pCh->dataSetIn |= I2_DRI; - pCh->icount.rng++; - dss_change = 1; - } - pCh->dataSetIn |= I2_RI ; - break; - - case STAT_RI_DN: - // to be compat with serial.c - //if ( pCh->dataSetIn & I2_RI ) - //{ - // pCh->dataSetIn |= I2_DRI; - // pCh->icount.rng++; - // dss_change = 1; - //} - pCh->dataSetIn &= ~I2_RI ; - break; - - case STAT_BRK_DET: - pCh->dataSetIn |= I2_BRK; - pCh->icount.brk++; - dss_change = 1; - break; - - // Bookmarks? one less request we're waiting for - case STAT_BMARK: - pCh->bookMarks--; - if (pCh->bookMarks <= 0 ) { - pCh->bookMarks = 0; - wake_up_interruptible( &pCh->pBookmarkWait ); - - ip2trace (channel, ITRC_DRAIN, 20, 1, pCh->BookmarkTimer.expires ); - } - break; - - // Flow control packets? Update the new credits, and if - // someone was waiting for output, queue him up again. - case STAT_FLOW: - pCh->outfl.room = - ((flowStatPtr)pc)->room - - (pCh->outfl.asof - ((flowStatPtr)pc)->asof); - - ip2trace (channel, ITRC_STFLW, 1, 1, pCh->outfl.room ); - - if (pCh->channelNeeds & NEED_CREDIT) - { - ip2trace (channel, ITRC_STFLW, 2, 1, pCh->channelNeeds); - - pCh->channelNeeds &= ~NEED_CREDIT; - i2QueueNeeds(pB, pCh, NEED_INLINE); - if ( pCh->pTTY ) - ip2_owake(pCh->pTTY); - } - - ip2trace (channel, ITRC_STFLW, 3, 1, pCh->channelNeeds); - - pc += sizeof(flowStat); - break; - - /* Special packets: */ - /* Just copy the information into the channel structure */ - - case STAT_STATUS: - - pCh->channelStatus = *((debugStatPtr)pc); - pc += sizeof(debugStat); - break; - - case STAT_TXCNT: - - pCh->channelTcount = *((cntStatPtr)pc); - pc += sizeof(cntStat); - break; - - case STAT_RXCNT: - - pCh->channelRcount = *((cntStatPtr)pc); - pc += sizeof(cntStat); - break; - - case STAT_BOXIDS: - pB->channelBtypes = *((bidStatPtr)pc); - pc += sizeof(bidStat); - set_baud_params(pB); - break; - - case STAT_HWFAIL: - i2QueueCommands (PTYPE_INLINE, pCh, 0, 1, CMD_HW_TEST); - pCh->channelFail = *((failStatPtr)pc); - pc += sizeof(failStat); - break; - - /* No explicit match? then - * Might be an error packet... - */ - default: - switch (uc & STAT_MOD_ERROR) - { - case STAT_ERROR: - if (uc & STAT_E_PARITY) { - pCh->dataSetIn |= I2_PAR; - pCh->icount.parity++; - } - if (uc & STAT_E_FRAMING){ - pCh->dataSetIn |= I2_FRA; - pCh->icount.frame++; - } - if (uc & STAT_E_OVERRUN){ - pCh->dataSetIn |= I2_OVR; - pCh->icount.overrun++; - } - break; - - case STAT_MODEM: - // the answer to DSS_NOW request (not change) - pCh->dataSetIn = (pCh->dataSetIn - & ~(I2_RI | I2_CTS | I2_DCD | I2_DSR) ) - | xlatDss[uc & 0xf]; - wake_up_interruptible ( &pCh->dss_now_wait ); - default: - break; - } - } /* End of switch on status type */ - if (dss_change) { -#ifdef USE_IQ - schedule_work(&pCh->tqueue_status); -#else - do_status(&pCh->tqueue_status); -#endif - } - } - else /* Or else, channel is invalid */ - { - // Even though the channel is invalid, we must test the - // status to see how much additional data it has (to be - // skipped) - switch (*pc++) - { - case STAT_FLOW: - pc += 4; /* Skip the data */ - break; - - default: - break; - } - } - } // End of while (there is still some status packet left) - break; - - default: // Neither packet? should be impossible - ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1, - PTYPE_OF(pB->i2eLeadoffWord) ); - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - - break; - } // End of switch on type of packets - } /*while(board I2_HAS_INPUT)*/ - - ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 ); - - // Send acknowledgement to the board even if there was no data! - pB->i2eOutMailWaiting |= MB_IN_STRIPPED; - return; -} - -//****************************************************************************** -// Function: i2Write2Fifo(pB,address,count) -// Parameters: Pointer to a board structure, source address, byte count -// Returns: bytes written -// -// Description: -// Writes count bytes to board io address(implied) from source -// Adjusts count, leaves reserve for next time around bypass cmds -//****************************************************************************** -static int -i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve) -{ - int rc = 0; - unsigned long flags; - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - if (!pB->i2eWaitingForEmptyFifo) { - if (pB->i2eFifoRemains > (count+reserve)) { - pB->i2eFifoRemains -= count; - iiWriteBuf(pB, source, count); - pB->i2eOutMailWaiting |= MB_OUT_STUFFED; - rc = count; - } - } - write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); - return rc; -} -//****************************************************************************** -// Function: i2StuffFifoBypass(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Stuffs as many bypass commands into the fifo as possible. This is simpler -// than stuffing data or inline commands to fifo, since we do not have -// flow-control to deal with. -//****************************************************************************** -static inline void -i2StuffFifoBypass(i2eBordStrPtr pB) -{ - i2ChanStrPtr pCh; - unsigned char *pRemove; - unsigned short stripIndex; - unsigned short packetSize; - unsigned short paddedSize; - unsigned short notClogged = 1; - unsigned long flags; - - int bailout = 1000; - - // Continue processing so long as there are entries, or there is room in the - // fifo. Each entry represents a channel with something to do. - while ( --bailout && notClogged && - (NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS)))) - { - write_lock_irqsave(&pCh->Cbuf_spinlock, flags); - stripIndex = pCh->Cbuf_strip; - - // as long as there are packets for this channel... - - while (stripIndex != pCh->Cbuf_stuff) { - pRemove = &(pCh->Cbuf[stripIndex]); - packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader); - paddedSize = roundup(packetSize, 2); - - if (paddedSize > 0) { - if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) { - notClogged = 0; /* fifo full */ - i2QueueNeeds(pB, pCh, NEED_BYPASS); // Put back on queue - break; // Break from the channel - } - } -#ifdef DEBUG_FIFO -WriteDBGBuf("BYPS", pRemove, paddedSize); -#endif /* DEBUG_FIFO */ - pB->debugBypassCount++; - - pRemove += packetSize; - stripIndex += packetSize; - if (stripIndex >= CBUF_SIZE) { - stripIndex = 0; - pRemove = pCh->Cbuf; - } - } - // Done with this channel. Move to next, removing this one from - // the queue of channels if we cleaned it out (i.e., didn't get clogged. - pCh->Cbuf_strip = stripIndex; - write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags); - } // Either clogged or finished all the work - -#ifdef IP2DEBUG_TRACE - if ( !bailout ) { - ip2trace (ITRC_NO_PORT, ITRC_ERROR, 1, 0 ); - } -#endif -} - -//****************************************************************************** -// Function: i2StuffFifoFlow(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Stuffs as many flow control packets into the fifo as possible. This is easier -// even than doing normal bypass commands, because there is always at most one -// packet, already assembled, for each channel. -//****************************************************************************** -static inline void -i2StuffFifoFlow(i2eBordStrPtr pB) -{ - i2ChanStrPtr pCh; - unsigned short paddedSize = roundup(sizeof(flowIn), 2); - - ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2, - pB->i2eFifoRemains, paddedSize ); - - // Continue processing so long as there are entries, or there is room in the - // fifo. Each entry represents a channel with something to do. - while ( (NULL != (pCh = i2DeQueueNeeds(pB,NEED_FLOW)))) { - pB->debugFlowCount++; - - // NO Chan LOCK needed ??? - if ( 0 == i2Write2Fifo(pB,(unsigned char *)&(pCh->infl),paddedSize,0)) { - break; - } -#ifdef DEBUG_FIFO - WriteDBGBuf("FLOW",(unsigned char *) &(pCh->infl), paddedSize); -#endif /* DEBUG_FIFO */ - - } // Either clogged or finished all the work - - ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_RETURN, 0 ); -} - -//****************************************************************************** -// Function: i2StuffFifoInline(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Stuffs as much data and inline commands into the fifo as possible. This is -// the most complex fifo-stuffing operation, since there if now the channel -// flow-control issue to deal with. -//****************************************************************************** -static inline void -i2StuffFifoInline(i2eBordStrPtr pB) -{ - i2ChanStrPtr pCh; - unsigned char *pRemove; - unsigned short stripIndex; - unsigned short packetSize; - unsigned short paddedSize; - unsigned short notClogged = 1; - unsigned short flowsize; - unsigned long flags; - - int bailout = 1000; - int bailout2; - - ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_ENTER, 3, pB->i2eFifoRemains, - pB->i2Dbuf_strip, pB->i2Dbuf_stuff ); - - // Continue processing so long as there are entries, or there is room in the - // fifo. Each entry represents a channel with something to do. - while ( --bailout && notClogged && - (NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) ) - { - write_lock_irqsave(&pCh->Obuf_spinlock, flags); - stripIndex = pCh->Obuf_strip; - - ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff ); - - // as long as there are packets for this channel... - bailout2 = 1000; - while ( --bailout2 && stripIndex != pCh->Obuf_stuff) { - pRemove = &(pCh->Obuf[stripIndex]); - - // Must determine whether this be a data or command packet to - // calculate correctly the header size and the amount of - // flow-control credit this type of packet will use. - if (PTYPE_OF(pRemove) == PTYPE_DATA) { - flowsize = DATA_COUNT_OF(pRemove); - packetSize = flowsize + sizeof(i2DataHeader); - } else { - flowsize = CMD_COUNT_OF(pRemove); - packetSize = flowsize + sizeof(i2CmdHeader); - } - flowsize = CREDIT_USAGE(flowsize); - paddedSize = roundup(packetSize, 2); - - ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize ); - - // If we don't have enough credits from the board to send the data, - // flag the channel that we are waiting for flow control credit, and - // break out. This will clean up this channel and remove us from the - // queue of hot things to do. - - ip2trace (CHANN, ITRC_SICMD, 5, 2, pCh->outfl.room, flowsize ); - - if (pCh->outfl.room <= flowsize) { - // Do Not have the credits to send this packet. - i2QueueNeeds(pB, pCh, NEED_CREDIT); - notClogged = 0; - break; // So to do next channel - } - if ( (paddedSize > 0) - && ( 0 == i2Write2Fifo(pB, pRemove, paddedSize, 128))) { - // Do Not have room in fifo to send this packet. - notClogged = 0; - i2QueueNeeds(pB, pCh, NEED_INLINE); - break; // Break from the channel - } -#ifdef DEBUG_FIFO -WriteDBGBuf("DATA", pRemove, paddedSize); -#endif /* DEBUG_FIFO */ - pB->debugInlineCount++; - - pCh->icount.tx += flowsize; - // Update current credits - pCh->outfl.room -= flowsize; - pCh->outfl.asof += flowsize; - if (PTYPE_OF(pRemove) == PTYPE_DATA) { - pCh->Obuf_char_count -= DATA_COUNT_OF(pRemove); - } - pRemove += packetSize; - stripIndex += packetSize; - - ip2trace (CHANN, ITRC_SICMD, 6, 2, stripIndex, pCh->Obuf_strip); - - if (stripIndex >= OBUF_SIZE) { - stripIndex = 0; - pRemove = pCh->Obuf; - - ip2trace (CHANN, ITRC_SICMD, 7, 1, stripIndex ); - - } - } /* while */ - if ( !bailout2 ) { - ip2trace (CHANN, ITRC_ERROR, 3, 0 ); - } - // Done with this channel. Move to next, removing this one from the - // queue of channels if we cleaned it out (i.e., didn't get clogged. - pCh->Obuf_strip = stripIndex; - write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - if ( notClogged ) - { - - ip2trace (CHANN, ITRC_SICMD, 8, 0 ); - - if ( pCh->pTTY ) { - ip2_owake(pCh->pTTY); - } - } - } // Either clogged or finished all the work - - if ( !bailout ) { - ip2trace (ITRC_NO_PORT, ITRC_ERROR, 4, 0 ); - } - - ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_RETURN, 1,pB->i2Dbuf_strip); -} - -//****************************************************************************** -// Function: serviceOutgoingFifo(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Helper routine to put data in the outgoing fifo, if we aren't already waiting -// for something to be there. If the fifo has only room for a very little data, -// go head and hit the board with a mailbox hit immediately. Otherwise, it will -// have to happen later in the interrupt processing. Since this routine may be -// called both at interrupt and foreground time, we must turn off interrupts -// during the entire process. -//****************************************************************************** -static void -serviceOutgoingFifo(i2eBordStrPtr pB) -{ - // If we aren't currently waiting for the board to empty our fifo, service - // everything that is pending, in priority order (especially, Bypass before - // Inline). - if ( ! pB->i2eWaitingForEmptyFifo ) - { - i2StuffFifoFlow(pB); - i2StuffFifoBypass(pB); - i2StuffFifoInline(pB); - - iiSendPendingMail(pB); - } -} - -//****************************************************************************** -// Function: i2ServiceBoard(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Normally this is called from interrupt level, but there is deliberately -// nothing in here specific to being called from interrupt level. All the -// hardware-specific, interrupt-specific things happen at the outer levels. -// -// For example, a timer interrupt could drive this routine for some sort of -// polled operation. The only requirement is that the programmer deal with any -// atomiticity/concurrency issues that result. -// -// This routine responds to the board's having sent mailbox information to the -// host (which would normally cause an interrupt). This routine reads the -// incoming mailbox. If there is no data in it, this board did not create the -// interrupt and/or has nothing to be done to it. (Except, if we have been -// waiting to write mailbox data to it, we may do so. -// -// Based on the value in the mailbox, we may take various actions. -// -// No checking here of pB validity: after all, it shouldn't have been called by -// the handler unless pB were on the list. -//****************************************************************************** -static inline int -i2ServiceBoard ( i2eBordStrPtr pB ) -{ - unsigned inmail; - unsigned long flags; - - - /* This should be atomic because of the way we are called... */ - if (NO_MAIL_HERE == ( inmail = pB->i2eStartMail ) ) { - inmail = iiGetMail(pB); - } - pB->i2eStartMail = NO_MAIL_HERE; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 2, 1, inmail ); - - if (inmail != NO_MAIL_HERE) { - // If the board has gone fatal, nothing to do but hit a bit that will - // alert foreground tasks to protest! - if ( inmail & MB_FATAL_ERROR ) { - pB->i2eFatal = 1; - goto exit_i2ServiceBoard; - } - - /* Assuming no fatal condition, we proceed to do work */ - if ( inmail & MB_IN_STUFFED ) { - pB->i2eFifoInInts++; - i2StripFifo(pB); /* There might be incoming packets */ - } - - if (inmail & MB_OUT_STRIPPED) { - pB->i2eFifoOutInts++; - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - pB->i2eFifoRemains = pB->i2eFifoSize; - pB->i2eWaitingForEmptyFifo = 0; - write_unlock_irqrestore(&pB->write_fifo_spinlock, - flags); - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains ); - - } - serviceOutgoingFifo(pB); - } - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 8, 0 ); - -exit_i2ServiceBoard: - - return 0; -} diff --git a/drivers/char/ip2/i2lib.h b/drivers/char/ip2/i2lib.h deleted file mode 100644 index e559e9bac06d..000000000000 --- a/drivers/char/ip2/i2lib.h +++ /dev/null @@ -1,351 +0,0 @@ -/******************************************************************************* -* -* (c) 1998 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Header file for high level library functions -* -*******************************************************************************/ -#ifndef I2LIB_H -#define I2LIB_H 1 -//------------------------------------------------------------------------------ -// I2LIB.H -// -// IntelliPort-II and IntelliPort-IIEX -// -// Defines, structure definitions, and external declarations for i2lib.c -//------------------------------------------------------------------------------ -//-------------------------------------- -// Mandatory Includes: -//-------------------------------------- -#include "ip2types.h" -#include "i2ellis.h" -#include "i2pack.h" -#include "i2cmd.h" -#include - -//------------------------------------------------------------------------------ -// i2ChanStr -- Channel Structure: -// Used to track per-channel information for the library routines using standard -// loadware. Note also, a pointer to an array of these structures is patched -// into the i2eBordStr (see i2ellis.h) -//------------------------------------------------------------------------------ -// -// If we make some limits on the maximum block sizes, we can avoid dealing with -// buffer wrap. The wrapping of the buffer is based on where the start of the -// packet is. Then there is always room for the packet contiguously. -// -// Maximum total length of an outgoing data or in-line command block. The limit -// of 36 on data is quite arbitrary and based more on DOS memory limitations -// than the board interface. However, for commands, the maximum packet length is -// MAX_CMD_PACK_SIZE, because the field size for the count is only a few bits -// (see I2PACK.H) in such packets. For data packets, the count field size is not -// the limiting factor. As of this writing, MAX_OBUF_BLOCK < MAX_CMD_PACK_SIZE, -// but be careful if wanting to modify either. -// -#define MAX_OBUF_BLOCK 36 - -// Another note on maximum block sizes: we are buffering packets here. Data is -// put into the buffer (if there is room) regardless of the credits from the -// board. The board sends new credits whenever it has removed from his buffers a -// number of characters equal to 80% of total buffer size. (Of course, the total -// buffer size is what is reported when the very first set of flow control -// status packets are received from the board. Therefore, to be robust, you must -// always fill the board to at least 80% of the current credit limit, else you -// might not give it enough to trigger a new report. These conditions are -// obtained here so long as the maximum output block size is less than 20% the -// size of the board's output buffers. This is true at present by "coincidence" -// or "infernal knowledge": the board's output buffers are at least 700 bytes -// long (20% = 140 bytes, at least). The 80% figure is "official", so the safest -// strategy might be to trap the first flow control report and guarantee that -// the effective maxObufBlock is the minimum of MAX_OBUF_BLOCK and 20% of first -// reported buffer credit. -// -#define MAX_CBUF_BLOCK 6 // Maximum total length of a bypass command block - -#define IBUF_SIZE 512 // character capacity of input buffer per channel -#define OBUF_SIZE 1024// character capacity of output buffer per channel -#define CBUF_SIZE 10 // character capacity of output bypass buffer - -typedef struct _i2ChanStr -{ - // First, back-pointers so that given a pointer to this structure, you can - // determine the correct board and channel number to reference, (say, when - // issuing commands, etc. (Note, channel number is in infl.hd.i2sChannel.) - - int port_index; // Index of port in channel structure array attached - // to board structure. - PTTY pTTY; // Pointer to tty structure for port (OS specific) - USHORT validity; // Indicates whether the given channel has been - // initialized, really exists (or is a missing - // channel, e.g. channel 9 on an 8-port box.) - - i2eBordStrPtr pMyBord; // Back-pointer to this channel's board structure - - int wopen; // waiting fer carrier - - int throttled; // Set if upper layer can take no data - - int flags; // Defined in tty.h - - PWAITQ open_wait; // Pointer for OS sleep function. - PWAITQ close_wait; // Pointer for OS sleep function. - PWAITQ delta_msr_wait;// Pointer for OS sleep function. - PWAITQ dss_now_wait; // Pointer for OS sleep function. - - struct timer_list BookmarkTimer; // Used by i2DrainOutput - wait_queue_head_t pBookmarkWait; // Used by i2DrainOutput - - int BaudBase; - int BaudDivisor; - - USHORT ClosingDelay; - USHORT ClosingWaitTime; - - volatile - flowIn infl; // This structure is initialized as a completely - // formed flow-control command packet, and as such - // has the channel number, also the capacity and - // "as-of" data needed continuously. - - USHORT sinceLastFlow; // Counts the number of characters read from input - // buffers, since the last time flow control info - // was sent. - - USHORT whenSendFlow; // Determines when new flow control is to be sent to - // the board. Note unlike earlier manifestations of - // the driver, these packets can be sent from - // in-place. - - USHORT channelNeeds; // Bit map of important things which must be done - // for this channel. (See bits below ) - - volatile - flowStat outfl; // Same type of structure is used to hold current - // flow control information used to control our - // output. "asof" is kept updated as data is sent, - // and "room" never goes to zero. - - // The incoming ring buffer - // Unlike the outgoing buffers, this holds raw data, not packets. The two - // extra bytes are used to hold the byte-padding when there is room for an - // odd number of bytes before we must wrap. - // - UCHAR Ibuf[IBUF_SIZE + 2]; - volatile - USHORT Ibuf_stuff; // Stuffing index - volatile - USHORT Ibuf_strip; // Stripping index - - // The outgoing ring-buffer: Holds Data and command packets. N.B., even - // though these are in the channel structure, the channel is also written - // here, the easier to send it to the fifo when ready. HOWEVER, individual - // packets here are NOT padded to even length: the routines for writing - // blocks to the fifo will pad to even byte counts. - // - UCHAR Obuf[OBUF_SIZE+MAX_OBUF_BLOCK+4]; - volatile - USHORT Obuf_stuff; // Stuffing index - volatile - USHORT Obuf_strip; // Stripping index - int Obuf_char_count; - - // The outgoing bypass-command buffer. Unlike earlier manifestations, the - // flow control packets are sent directly from the structures. As above, the - // channel number is included in the packet, but they are NOT padded to even - // size. - // - UCHAR Cbuf[CBUF_SIZE+MAX_CBUF_BLOCK+2]; - volatile - USHORT Cbuf_stuff; // Stuffing index - volatile - USHORT Cbuf_strip; // Stripping index - - // The temporary buffer for the Linux tty driver PutChar entry. - // - UCHAR Pbuf[MAX_OBUF_BLOCK - sizeof (i2DataHeader)]; - volatile - USHORT Pbuf_stuff; // Stuffing index - - // The state of incoming data-set signals - // - USHORT dataSetIn; // Bit-mapped according to below. Also indicates - // whether a break has been detected since last - // inquiry. - - // The state of outcoming data-set signals (as far as we can tell!) - // - USHORT dataSetOut; // Bit-mapped according to below. - - // Most recent hot-key identifier detected - // - USHORT hotKeyIn; // Hot key as sent by the board, HOT_CLEAR indicates - // no hot key detected since last examined. - - // Counter of outstanding requests for bookmarks - // - short bookMarks; // Number of outstanding bookmark requests, (+ive - // whenever a bookmark request if queued up, -ive - // whenever a bookmark is received). - - // Misc options - // - USHORT channelOptions; // See below - - // To store various incoming special packets - // - debugStat channelStatus; - cntStat channelRcount; - cntStat channelTcount; - failStat channelFail; - - // To store the last values for line characteristics we sent to the board. - // - int speed; - - int flush_flags; - - void (*trace)(unsigned short,unsigned char,unsigned char,unsigned long,...); - - /* - * Kernel counters for the 4 input interrupts - */ - struct async_icount icount; - - /* - * Task queues for processing input packets from the board. - */ - struct work_struct tqueue_input; - struct work_struct tqueue_status; - struct work_struct tqueue_hangup; - - rwlock_t Ibuf_spinlock; - rwlock_t Obuf_spinlock; - rwlock_t Cbuf_spinlock; - rwlock_t Pbuf_spinlock; - -} i2ChanStr, *i2ChanStrPtr; - -//--------------------------------------------------- -// Manifests and bit-maps for elements in i2ChanStr -//--------------------------------------------------- -// -// flush flags -// -#define STARTFL_FLAG 1 -#define STOPFL_FLAG 2 - -// validity -// -#define CHANNEL_MAGIC_BITS 0xff00 -#define CHANNEL_MAGIC 0x5300 // (validity & CHANNEL_MAGIC_BITS) == - // CHANNEL_MAGIC --> structure good - -#define CHANNEL_SUPPORT 0x0001 // Indicates channel is supported, exists, - // and passed P.O.S.T. - -// channelNeeds -// -#define NEED_FLOW 1 // Indicates flow control has been queued -#define NEED_INLINE 2 // Indicates inline commands or data queued -#define NEED_BYPASS 4 // Indicates bypass commands queued -#define NEED_CREDIT 8 // Indicates would be sending except has not sufficient - // credit. The data is still in the channel structure, - // but the channel is not enqueued in the board - // structure again until there is a credit received from - // the board. - -// dataSetIn (Also the bits for i2GetStatus return value) -// -#define I2_DCD 1 -#define I2_CTS 2 -#define I2_DSR 4 -#define I2_RI 8 - -// dataSetOut (Also the bits for i2GetStatus return value) -// -#define I2_DTR 1 -#define I2_RTS 2 - -// i2GetStatus() can optionally clear these bits -// -#define I2_BRK 0x10 // A break was detected -#define I2_PAR 0x20 // A parity error was received -#define I2_FRA 0x40 // A framing error was received -#define I2_OVR 0x80 // An overrun error was received - -// i2GetStatus() automatically clears these bits */ -// -#define I2_DDCD 0x100 // DCD changed from its former value -#define I2_DCTS 0x200 // CTS changed from its former value -#define I2_DDSR 0x400 // DSR changed from its former value -#define I2_DRI 0x800 // RI changed from its former value - -// hotKeyIn -// -#define HOT_CLEAR 0x1322 // Indicates that no hot-key has been detected - -// channelOptions -// -#define CO_NBLOCK_WRITE 1 // Writes don't block waiting for buffer. (Default - // is, they do wait.) - -// fcmodes -// -#define I2_OUTFLOW_CTS 0x0001 -#define I2_INFLOW_RTS 0x0002 -#define I2_INFLOW_DSR 0x0004 -#define I2_INFLOW_DTR 0x0008 -#define I2_OUTFLOW_DSR 0x0010 -#define I2_OUTFLOW_DTR 0x0020 -#define I2_OUTFLOW_XON 0x0040 -#define I2_OUTFLOW_XANY 0x0080 -#define I2_INFLOW_XON 0x0100 - -#define I2_CRTSCTS (I2_OUTFLOW_CTS|I2_INFLOW_RTS) -#define I2_IXANY_MODE (I2_OUTFLOW_XON|I2_OUTFLOW_XANY) - -//------------------------------------------- -// Macros used from user level like functions -//------------------------------------------- - -// Macros to set and clear channel options -// -#define i2SetOption(pCh, option) pCh->channelOptions |= option -#define i2ClrOption(pCh, option) pCh->channelOptions &= ~option - -// Macro to set fatal-error trap -// -#define i2SetFatalTrap(pB, routine) pB->i2eFatalTrap = routine - -//-------------------------------------------- -// Declarations and prototypes for i2lib.c -//-------------------------------------------- -// -static int i2InitChannels(i2eBordStrPtr, int, i2ChanStrPtr); -static int i2QueueCommands(int, i2ChanStrPtr, int, int, cmdSyntaxPtr,...); -static int i2GetStatus(i2ChanStrPtr, int); -static int i2Input(i2ChanStrPtr); -static int i2InputFlush(i2ChanStrPtr); -static int i2Output(i2ChanStrPtr, const char *, int); -static int i2OutputFree(i2ChanStrPtr); -static int i2ServiceBoard(i2eBordStrPtr); -static void i2DrainOutput(i2ChanStrPtr, int); - -#ifdef IP2DEBUG_TRACE -void ip2trace(unsigned short,unsigned char,unsigned char,unsigned long,...); -#else -#define ip2trace(a,b,c,d...) do {} while (0) -#endif - -// Argument to i2QueueCommands -// -#define C_IN_LINE 1 -#define C_BYPASS 0 - -#endif // I2LIB_H diff --git a/drivers/char/ip2/i2pack.h b/drivers/char/ip2/i2pack.h deleted file mode 100644 index 00342a677c90..000000000000 --- a/drivers/char/ip2/i2pack.h +++ /dev/null @@ -1,364 +0,0 @@ -/******************************************************************************* -* -* (c) 1998 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Definitions of the packets used to transfer data and commands -* Host <--> Board. Information provided here is only applicable -* when the standard loadware is active. -* -*******************************************************************************/ -#ifndef I2PACK_H -#define I2PACK_H 1 - -//----------------------------------------------- -// Revision History: -// -// 10 October 1991 MAG First draft -// 24 February 1992 MAG Additions for 1.4.x loadware -// 11 March 1992 MAG New status packets -// -//----------------------------------------------- - -//------------------------------------------------------------------------------ -// Packet Formats: -// -// Information passes between the host and board through the FIFO in packets. -// These have headers which indicate the type of packet. Because the fifo data -// path may be 16-bits wide, the protocol is constrained such that each packet -// is always padded to an even byte count. (The lower-level interface routines -// -- i2ellis.c -- are designed to do this). -// -// The sender (be it host or board) must place some number of complete packets -// in the fifo, then place a message in the mailbox that packets are available. -// Placing such a message interrupts the "receiver" (be it board or host), who -// reads the mailbox message and determines that there are incoming packets -// ready. Since there are no partial packets, and the length of a packet is -// given in the header, the remainder of the packet can be read without checking -// for FIFO empty condition. The process is repeated, packet by packet, until -// the incoming FIFO is empty. Then the receiver uses the outbound mailbox to -// signal the board that it has read the data. Only then can the sender place -// additional data in the fifo. -//------------------------------------------------------------------------------ -// -//------------------------------------------------ -// Definition of Packet Header Area -//------------------------------------------------ -// -// Caution: these only define header areas. In actual use the data runs off -// beyond the end of these structures. -// -// Since these structures are based on sequences of bytes which go to the board, -// there cannot be ANY padding between the elements. -#pragma pack(1) - -//---------------------------- -// DATA PACKETS -//---------------------------- - -typedef struct _i2DataHeader -{ - unsigned char i2sChannel; /* The channel number: 0-255 */ - - // -- Bitfields are allocated LSB first -- - - // For incoming data, indicates whether this is an ordinary packet or a - // special one (e.g., hot key hit). - unsigned i2sId : 2 __attribute__ ((__packed__)); - - // For tagging data packets. There are flush commands which flush only data - // packets bearing a particular tag. (used in implementing IntelliView and - // IntelliPrint). THE TAG VALUE 0xf is RESERVED and must not be used (it has - // meaning internally to the loadware). - unsigned i2sTag : 4; - - // These two bits determine the type of packet sent/received. - unsigned i2sType : 2; - - // The count of data to follow: does not include the possible additional - // padding byte. MAXIMUM COUNT: 4094. The top four bits must be 0. - unsigned short i2sCount; - -} i2DataHeader, *i2DataHeaderPtr; - -// Structure is immediately followed by the data, proper. - -//---------------------------- -// NON-DATA PACKETS -//---------------------------- - -typedef struct _i2CmdHeader -{ - unsigned char i2sChannel; // The channel number: 0-255 (Except where noted - // - see below - - // Number of bytes of commands, status or whatever to follow - unsigned i2sCount : 6; - - // These two bits determine the type of packet sent/received. - unsigned i2sType : 2; - -} i2CmdHeader, *i2CmdHeaderPtr; - -// Structure is immediately followed by the applicable data. - -//--------------------------------------- -// Flow Control Packets (Outbound) -//--------------------------------------- - -// One type of outbound command packet is so important that the entire structure -// is explicitly defined here. That is the flow-control packet. This is never -// sent by user-level code (as would be the commands to raise/lower DTR, for -// example). These are only sent by the library routines in response to reading -// incoming data into the buffers. -// -// The parameters inside the command block are maintained in place, then the -// block is sent at the appropriate time. - -typedef struct _flowIn -{ - i2CmdHeader hd; // Channel #, count, type (see above) - unsigned char fcmd; // The flow control command (37) - unsigned short asof; // As of byte number "asof" (LSB first!) I have room - // for "room" bytes - unsigned short room; -} flowIn, *flowInPtr; - -//---------------------------------------- -// (Incoming) Status Packets -//---------------------------------------- - -// Incoming packets which are non-data packets are status packets. In this case, -// the channel number in the header is unimportant. What follows are one or more -// sub-packets, the first word of which consists of the channel (first or low -// byte) and the status indicator (second or high byte), followed by possibly -// more data. - -#define STAT_CTS_UP 0 /* CTS raised (no other bytes) */ -#define STAT_CTS_DN 1 /* CTS dropped (no other bytes) */ -#define STAT_DCD_UP 2 /* DCD raised (no other bytes) */ -#define STAT_DCD_DN 3 /* DCD dropped (no other bytes) */ -#define STAT_DSR_UP 4 /* DSR raised (no other bytes) */ -#define STAT_DSR_DN 5 /* DSR dropped (no other bytes) */ -#define STAT_RI_UP 6 /* RI raised (no other bytes) */ -#define STAT_RI_DN 7 /* RI dropped (no other bytes) */ -#define STAT_BRK_DET 8 /* BRK detect (no other bytes) */ -#define STAT_FLOW 9 /* Flow control(-- more: see below */ -#define STAT_BMARK 10 /* Bookmark (no other bytes) - * Bookmark is sent as a response to - * a command 60: request for bookmark - */ -#define STAT_STATUS 11 /* Special packet: see below */ -#define STAT_TXCNT 12 /* Special packet: see below */ -#define STAT_RXCNT 13 /* Special packet: see below */ -#define STAT_BOXIDS 14 /* Special packet: see below */ -#define STAT_HWFAIL 15 /* Special packet: see below */ - -#define STAT_MOD_ERROR 0xc0 -#define STAT_MODEM 0xc0/* If status & STAT_MOD_ERROR: - * == STAT_MODEM, then this is a modem - * status packet, given in response to a - * CMD_DSS_NOW command. - * The low nibble has each data signal: - */ -#define STAT_MOD_DCD 0x8 -#define STAT_MOD_RI 0x4 -#define STAT_MOD_DSR 0x2 -#define STAT_MOD_CTS 0x1 - -#define STAT_ERROR 0x80/* If status & STAT_MOD_ERROR - * == STAT_ERROR, then - * sort of error on the channel. - * The remaining seven bits indicate - * what sort of error it is. - */ -/* The low three bits indicate parity, framing, or overrun errors */ - -#define STAT_E_PARITY 4 /* Parity error */ -#define STAT_E_FRAMING 2 /* Framing error */ -#define STAT_E_OVERRUN 1 /* (uxart) overrun error */ - -//--------------------------------------- -// STAT_FLOW packets -//--------------------------------------- - -typedef struct _flowStat -{ - unsigned short asof; - unsigned short room; -}flowStat, *flowStatPtr; - -// flowStat packets are received from the board to regulate the flow of outgoing -// data. A local copy of this structure is also kept to track the amount of -// credits used and credits remaining. "room" is the amount of space in the -// board's buffers, "as of" having received a certain byte number. When sending -// data to the fifo, you must calculate how much buffer space your packet will -// use. Add this to the current "asof" and subtract it from the current "room". -// -// The calculation for the board's buffer is given by CREDIT_USAGE, where size -// is the un-rounded count of either data characters or command characters. -// (Which is to say, the count rounded up, plus two). - -#define CREDIT_USAGE(size) (((size) + 3) & ~1) - -//--------------------------------------- -// STAT_STATUS packets -//--------------------------------------- - -typedef struct _debugStat -{ - unsigned char d_ccsr; - unsigned char d_txinh; - unsigned char d_stat1; - unsigned char d_stat2; -} debugStat, *debugStatPtr; - -// debugStat packets are sent to the host in response to a CMD_GET_STATUS -// command. Each byte is bit-mapped as described below: - -#define D_CCSR_XON 2 /* Has received XON, ready to transmit */ -#define D_CCSR_XOFF 4 /* Has received XOFF, not transmitting */ -#define D_CCSR_TXENAB 8 /* Transmitter is enabled */ -#define D_CCSR_RXENAB 0x80 /* Receiver is enabled */ - -#define D_TXINH_BREAK 1 /* We are sending a break */ -#define D_TXINH_EMPTY 2 /* No data to send */ -#define D_TXINH_SUSP 4 /* Output suspended via command 57 */ -#define D_TXINH_CMD 8 /* We are processing an in-line command */ -#define D_TXINH_LCD 0x10 /* LCD diagnostics are running */ -#define D_TXINH_PAUSE 0x20 /* We are processing a PAUSE command */ -#define D_TXINH_DCD 0x40 /* DCD is low, preventing transmission */ -#define D_TXINH_DSR 0x80 /* DSR is low, preventing transmission */ - -#define D_STAT1_TXEN 1 /* Transmit INTERRUPTS enabled */ -#define D_STAT1_RXEN 2 /* Receiver INTERRUPTS enabled */ -#define D_STAT1_MDEN 4 /* Modem (data set sigs) interrupts enabled */ -#define D_STAT1_RLM 8 /* Remote loopback mode selected */ -#define D_STAT1_LLM 0x10 /* Local internal loopback mode selected */ -#define D_STAT1_CTS 0x20 /* CTS is low, preventing transmission */ -#define D_STAT1_DTR 0x40 /* DTR is low, to stop remote transmission */ -#define D_STAT1_RTS 0x80 /* RTS is low, to stop remote transmission */ - -#define D_STAT2_TXMT 1 /* Transmit buffers are all empty */ -#define D_STAT2_RXMT 2 /* Receive buffers are all empty */ -#define D_STAT2_RXINH 4 /* Loadware has tried to inhibit remote - * transmission: dropped DTR, sent XOFF, - * whatever... - */ -#define D_STAT2_RXFLO 8 /* Loadware can send no more data to host - * until it receives a flow-control packet - */ -//----------------------------------------- -// STAT_TXCNT and STAT_RXCNT packets -//---------------------------------------- - -typedef struct _cntStat -{ - unsigned short cs_time; // (Assumes host is little-endian!) - unsigned short cs_count; -} cntStat, *cntStatPtr; - -// These packets are sent in response to a CMD_GET_RXCNT or a CMD_GET_TXCNT -// bypass command. cs_time is a running 1 Millisecond counter which acts as a -// time stamp. cs_count is a running counter of data sent or received from the -// uxarts. (Not including data added by the chip itself, as with CRLF -// processing). -//------------------------------------------ -// STAT_HWFAIL packets -//------------------------------------------ - -typedef struct _failStat -{ - unsigned char fs_written; - unsigned char fs_read; - unsigned short fs_address; -} failStat, *failStatPtr; - -// This packet is sent whenever the on-board diagnostic process detects an -// error. At startup, this process is dormant. The host can wake it up by -// issuing the bypass command CMD_HW_TEST. The process runs at low priority and -// performs continuous hardware verification; writing data to certain on-board -// registers, reading it back, and comparing. If it detects an error, this -// packet is sent to the host, and the process goes dormant again until the host -// sends another CMD_HW_TEST. It then continues with the next register to be -// tested. - -//------------------------------------------------------------------------------ -// Macros to deal with the headers more easily! Note that these are defined so -// they may be used as "left" as well as "right" expressions. -//------------------------------------------------------------------------------ - -// Given a pointer to the packet, reference the channel number -// -#define CHANNEL_OF(pP) ((i2DataHeaderPtr)(pP))->i2sChannel - -// Given a pointer to the packet, reference the Packet type -// -#define PTYPE_OF(pP) ((i2DataHeaderPtr)(pP))->i2sType - -// The possible types of packets -// -#define PTYPE_DATA 0 /* Host <--> Board */ -#define PTYPE_BYPASS 1 /* Host ---> Board */ -#define PTYPE_INLINE 2 /* Host ---> Board */ -#define PTYPE_STATUS 2 /* Host <--- Board */ - -// Given a pointer to a Data packet, reference the Tag -// -#define TAG_OF(pP) ((i2DataHeaderPtr)(pP))->i2sTag - -// Given a pointer to a Data packet, reference the data i.d. -// -#define ID_OF(pP) ((i2DataHeaderPtr)(pP))->i2sId - -// The possible types of ID's -// -#define ID_ORDINARY_DATA 0 -#define ID_HOT_KEY 1 - -// Given a pointer to a Data packet, reference the count -// -#define DATA_COUNT_OF(pP) ((i2DataHeaderPtr)(pP))->i2sCount - -// Given a pointer to a Data packet, reference the beginning of data -// -#define DATA_OF(pP) &((unsigned char *)(pP))[4] // 4 = size of header - -// Given a pointer to a Non-Data packet, reference the count -// -#define CMD_COUNT_OF(pP) ((i2CmdHeaderPtr)(pP))->i2sCount - -#define MAX_CMD_PACK_SIZE 62 // Maximum size of such a count - -// Given a pointer to a Non-Data packet, reference the beginning of data -// -#define CMD_OF(pP) &((unsigned char *)(pP))[2] // 2 = size of header - -//-------------------------------- -// MailBox Bits: -//-------------------------------- - -//-------------------------- -// Outgoing (host to board) -//-------------------------- -// -#define MB_OUT_STUFFED 0x80 // Host has placed output in fifo -#define MB_IN_STRIPPED 0x40 // Host has read in all input from fifo - -//-------------------------- -// Incoming (board to host) -//-------------------------- -// -#define MB_IN_STUFFED 0x80 // Board has placed input in fifo -#define MB_OUT_STRIPPED 0x40 // Board has read all output from fifo -#define MB_FATAL_ERROR 0x20 // Board has encountered a fatal error - -#pragma pack() // Reset padding to command-line default - -#endif // I2PACK_H - diff --git a/drivers/char/ip2/ip2.h b/drivers/char/ip2/ip2.h deleted file mode 100644 index 936ccc533949..000000000000 --- a/drivers/char/ip2/ip2.h +++ /dev/null @@ -1,107 +0,0 @@ -/******************************************************************************* -* -* (c) 1998 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Driver constants for configuration and tuning -* -* NOTES: -* -*******************************************************************************/ -#ifndef IP2_H -#define IP2_H - -#include "ip2types.h" -#include "i2cmd.h" - -/*************/ -/* Constants */ -/*************/ - -/* Device major numbers - since version 2.0.26. */ -#define IP2_TTY_MAJOR 71 -#define IP2_CALLOUT_MAJOR 72 -#define IP2_IPL_MAJOR 73 - -/* Board configuration array. - * This array defines the hardware irq and address for up to IP2_MAX_BOARDS - * (4 supported per ip2_types.h) ISA board addresses and irqs MUST be specified, - * PCI and EISA boards are probed for and automagicly configed - * iff the addresses are set to 1 and 2 respectivily. - * 0x0100 - 0x03f0 == ISA - * 1 == PCI - * 2 == EISA - * 0 == (skip this board) - * This array defines the hardware addresses for them. Special - * addresses are EISA and PCI which go sniffing for boards. - - * In a multiboard system the position in the array determines which port - * devices are assigned to each board: - * board 0 is assigned ttyF0.. to ttyF63, - * board 1 is assigned ttyF64 to ttyF127, - * board 2 is assigned ttyF128 to ttyF191, - * board 3 is assigned ttyF192 to ttyF255. - * - * In PCI and EISA bus systems each range is mapped to card in - * monotonically increasing slot number order, ISA position is as specified - * here. - - * If the irqs are ALL set to 0,0,0,0 all boards operate in - * polled mode. For interrupt operation ISA boards require that the IRQ be - * specified, while PCI and EISA boards any nonzero entry - * will enable interrupts using the BIOS configured irq for the board. - * An invalid irq entry will default to polled mode for that card and print - * console warning. - - * When the driver is loaded as a module these setting can be overridden on the - * modprobe command line or on an option line in /etc/modprobe.conf. - * If the driver is built-in the configuration must be - * set here for ISA cards and address set to 1 and 2 for PCI and EISA. - * - * Here is an example that shows most if not all possibe combinations: - - *static ip2config_t ip2config = - *{ - * {11,1,0,0}, // irqs - * { // Addresses - * 0x0308, // Board 0, ttyF0 - ttyF63// ISA card at io=0x308, irq=11 - * 0x0001, // Board 1, ttyF64 - ttyF127//PCI card configured by BIOS - * 0x0000, // Board 2, ttyF128 - ttyF191// Slot skipped - * 0x0002 // Board 3, ttyF192 - ttyF255//EISA card configured by BIOS - * // but polled not irq driven - * } - *}; - */ - - /* this structure is zeroed out because the suggested method is to configure - * the driver as a module, set up the parameters with an options line in - * /etc/modprobe.conf and load with modprobe or kmod, the kernel - * module loader - */ - - /* This structure is NOW always initialized when the driver is initialized. - * Compiled in defaults MUST be added to the io and irq arrays in - * ip2.c. Those values are configurable from insmod parameters in the - * case of modules or from command line parameters (ip2=io,irq) when - * compiled in. - */ - -static ip2config_t ip2config = -{ - {0,0,0,0}, // irqs - { // Addresses - /* Do NOT set compile time defaults HERE! Use the arrays in - ip2.c! These WILL be overwritten! =mhw= */ - 0x0000, // Board 0, ttyF0 - ttyF63 - 0x0000, // Board 1, ttyF64 - ttyF127 - 0x0000, // Board 2, ttyF128 - ttyF191 - 0x0000 // Board 3, ttyF192 - ttyF255 - } -}; - -#endif diff --git a/drivers/char/ip2/ip2ioctl.h b/drivers/char/ip2/ip2ioctl.h deleted file mode 100644 index aa0a9da85e05..000000000000 --- a/drivers/char/ip2/ip2ioctl.h +++ /dev/null @@ -1,35 +0,0 @@ -/******************************************************************************* -* -* (c) 1998 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Driver constants for configuration and tuning -* -* NOTES: -* -*******************************************************************************/ - -#ifndef IP2IOCTL_H -#define IP2IOCTL_H - -//************* -//* Constants * -//************* - -// High baud rates (if not defined elsewhere. -#ifndef B153600 -# define B153600 0010005 -#endif -#ifndef B307200 -# define B307200 0010006 -#endif -#ifndef B921600 -# define B921600 0010007 -#endif - -#endif diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c deleted file mode 100644 index ea7a8fb08283..000000000000 --- a/drivers/char/ip2/ip2main.c +++ /dev/null @@ -1,3234 +0,0 @@ -/* -* -* (c) 1999 by Computone Corporation -* -******************************************************************************** -* -* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Mainline code for the device driver -* -*******************************************************************************/ -// ToDo: -// -// Fix the immediate DSS_NOW problem. -// Work over the channel stats return logic in ip2_ipl_ioctl so they -// make sense for all 256 possible channels and so the user space -// utilities will compile and work properly. -// -// Done: -// -// 1.2.14 /\/\|=mhw=|\/\/ -// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts. -// Changed the definition of ip2trace to be more consistent with kernel style -// Thanks to Andreas Dilger for these updates -// -// 1.2.13 /\/\|=mhw=|\/\/ -// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform -// to agreed devfs serial device naming convention. -// -// 1.2.12 /\/\|=mhw=|\/\/ -// Cleaned up some remove queue cut and paste errors -// -// 1.2.11 /\/\|=mhw=|\/\/ -// Clean up potential NULL pointer dereferences -// Clean up devfs registration -// Add kernel command line parsing for io and irq -// Compile defaults for io and irq are now set in ip2.c not ip2.h! -// Reworked poll_only hack for explicit parameter setting -// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0 -// Merged ip2_loadmain and old_ip2_init -// Converted all instances of interruptible_sleep_on into queue calls -// Most of these had no race conditions but better to clean up now -// -// 1.2.10 /\/\|=mhw=|\/\/ -// Fixed the bottom half interrupt handler and enabled USE_IQI -// to split the interrupt handler into a formal top-half / bottom-half -// Fixed timing window on high speed processors that queued messages to -// the outbound mail fifo faster than the board could handle. -// -// 1.2.9 -// Four box EX was barfing on >128k kmalloc, made structure smaller by -// reducing output buffer size -// -// 1.2.8 -// Device file system support (MHW) -// -// 1.2.7 -// Fixed -// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules -// -// 1.2.6 -//Fixes DCD problems -// DCD was not reported when CLOCAL was set on call to TIOCMGET -// -//Enhancements: -// TIOCMGET requests and waits for status return -// No DSS interrupts enabled except for DCD when needed -// -// For internal use only -// -//#define IP2DEBUG_INIT -//#define IP2DEBUG_OPEN -//#define IP2DEBUG_WRITE -//#define IP2DEBUG_READ -//#define IP2DEBUG_IOCTL -//#define IP2DEBUG_IPL - -//#define IP2DEBUG_TRACE -//#define DEBUG_FIFO - -/************/ -/* Includes */ -/************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include - -#include "ip2types.h" -#include "ip2trace.h" -#include "ip2ioctl.h" -#include "ip2.h" -#include "i2ellis.h" -#include "i2lib.h" - -/***************** - * /proc/ip2mem * - *****************/ - -#include -#include - -static DEFINE_MUTEX(ip2_mutex); -static const struct file_operations ip2mem_proc_fops; -static const struct file_operations ip2_proc_fops; - -/********************/ -/* Type Definitions */ -/********************/ - -/*************/ -/* Constants */ -/*************/ - -/* String constants to identify ourselves */ -static const char pcName[] = "Computone IntelliPort Plus multiport driver"; -static const char pcVersion[] = "1.2.14"; - -/* String constants for port names */ -static const char pcDriver_name[] = "ip2"; -static const char pcIpl[] = "ip2ipl"; - -/***********************/ -/* Function Prototypes */ -/***********************/ - -/* Global module entry functions */ - -/* Private (static) functions */ -static int ip2_open(PTTY, struct file *); -static void ip2_close(PTTY, struct file *); -static int ip2_write(PTTY, const unsigned char *, int); -static int ip2_putchar(PTTY, unsigned char); -static void ip2_flush_chars(PTTY); -static int ip2_write_room(PTTY); -static int ip2_chars_in_buf(PTTY); -static void ip2_flush_buffer(PTTY); -static int ip2_ioctl(PTTY, UINT, ULONG); -static void ip2_set_termios(PTTY, struct ktermios *); -static void ip2_set_line_discipline(PTTY); -static void ip2_throttle(PTTY); -static void ip2_unthrottle(PTTY); -static void ip2_stop(PTTY); -static void ip2_start(PTTY); -static void ip2_hangup(PTTY); -static int ip2_tiocmget(struct tty_struct *tty); -static int ip2_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int ip2_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); - -static void set_irq(int, int); -static void ip2_interrupt_bh(struct work_struct *work); -static irqreturn_t ip2_interrupt(int irq, void *dev_id); -static void ip2_poll(unsigned long arg); -static inline void service_all_boards(void); -static void do_input(struct work_struct *); -static void do_status(struct work_struct *); - -static void ip2_wait_until_sent(PTTY,int); - -static void set_params (i2ChanStrPtr, struct ktermios *); -static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *); -static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *); - -static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *); -static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *); -static long ip2_ipl_ioctl(struct file *, UINT, ULONG); -static int ip2_ipl_open(struct inode *, struct file *); - -static int DumpTraceBuffer(char __user *, int); -static int DumpFifoBuffer( char __user *, int); - -static void ip2_init_board(int, const struct firmware *); -static unsigned short find_eisa_board(int); -static int ip2_setup(char *str); - -/***************/ -/* Static Data */ -/***************/ - -static struct tty_driver *ip2_tty_driver; - -/* Here, then is a table of board pointers which the interrupt routine should - * scan through to determine who it must service. - */ -static unsigned short i2nBoards; // Number of boards here - -static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS]; - -static i2ChanStrPtr DevTable[IP2_MAX_PORTS]; -//DevTableMem just used to save addresses for kfree -static void *DevTableMem[IP2_MAX_BOARDS]; - -/* This is the driver descriptor for the ip2ipl device, which is used to - * download the loadware to the boards. - */ -static const struct file_operations ip2_ipl = { - .owner = THIS_MODULE, - .read = ip2_ipl_read, - .write = ip2_ipl_write, - .unlocked_ioctl = ip2_ipl_ioctl, - .open = ip2_ipl_open, - .llseek = noop_llseek, -}; - -static unsigned long irq_counter; -static unsigned long bh_counter; - -// Use immediate queue to service interrupts -#define USE_IQI -//#define USE_IQ // PCI&2.2 needs work - -/* The timer_list entry for our poll routine. If interrupt operation is not - * selected, the board is serviced periodically to see if anything needs doing. - */ -#define POLL_TIMEOUT (jiffies + 1) -static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0); - -#ifdef IP2DEBUG_TRACE -/* Trace (debug) buffer data */ -#define TRACEMAX 1000 -static unsigned long tracebuf[TRACEMAX]; -static int tracestuff; -static int tracestrip; -static int tracewrap; -#endif - -/**********/ -/* Macros */ -/**********/ - -#ifdef IP2DEBUG_OPEN -#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \ - tty->name,(pCh->flags), \ - tty->count,/*GET_USE_COUNT(module)*/0,s) -#else -#define DBG_CNT(s) -#endif - -/********/ -/* Code */ -/********/ - -#include "i2ellis.c" /* Extremely low-level interface services */ -#include "i2cmd.c" /* Standard loadware command definitions */ -#include "i2lib.c" /* High level interface services */ - -/* Configuration area for modprobe */ - -MODULE_AUTHOR("Doug McNash"); -MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); -MODULE_LICENSE("GPL"); - -#define MAX_CMD_STR 50 - -static int poll_only; -static char cmd[MAX_CMD_STR]; - -static int Eisa_irq; -static int Eisa_slot; - -static int iindx; -static char rirqs[IP2_MAX_BOARDS]; -static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; - -/* Note: Add compiled in defaults to these arrays, not to the structure - in ip2.h any longer. That structure WILL get overridden - by these values, or command line values, or insmod values!!! =mhw= -*/ -static int io[IP2_MAX_BOARDS]; -static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 }; - -MODULE_AUTHOR("Doug McNash"); -MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards"); -module_param_array(io, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards"); -module_param(poll_only, bool, 0); -MODULE_PARM_DESC(poll_only, "Do not use card interrupts"); -module_param_string(ip2, cmd, MAX_CMD_STR, 0); -MODULE_PARM_DESC(ip2, "Contains module parameter passed with 'ip2='"); - -/* for sysfs class support */ -static struct class *ip2_class; - -/* Some functions to keep track of what irqs we have */ - -static int __init is_valid_irq(int irq) -{ - int *i = Valid_Irqs; - - while (*i != 0 && *i != irq) - i++; - - return *i; -} - -static void __init mark_requested_irq(char irq) -{ - rirqs[iindx++] = irq; -} - -static int __exit clear_requested_irq(char irq) -{ - int i; - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - if (rirqs[i] == irq) { - rirqs[i] = 0; - return 1; - } - } - return 0; -} - -static int have_requested_irq(char irq) -{ - /* array init to zeros so 0 irq will not be requested as a side - * effect */ - int i; - for (i = 0; i < IP2_MAX_BOARDS; ++i) - if (rirqs[i] == irq) - return 1; - return 0; -} - -/******************************************************************************/ -/* Function: cleanup_module() */ -/* Parameters: None */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This is a required entry point for an installable module. It has to return */ -/* the device and the driver to a passive state. It should not be necessary */ -/* to reset the board fully, especially as the loadware is downloaded */ -/* externally rather than in the driver. We just want to disable the board */ -/* and clear the loadware to a reset state. To allow this there has to be a */ -/* way to detect whether the board has the loadware running at init time to */ -/* handle subsequent installations of the driver. All memory allocated by the */ -/* driver should be returned since it may be unloaded from memory. */ -/******************************************************************************/ -static void __exit ip2_cleanup_module(void) -{ - int err; - int i; - - del_timer_sync(&PollTimer); - - /* Reset the boards we have. */ - for (i = 0; i < IP2_MAX_BOARDS; i++) - if (i2BoardPtrTable[i]) - iiReset(i2BoardPtrTable[i]); - - /* The following is done at most once, if any boards were installed. */ - for (i = 0; i < IP2_MAX_BOARDS; i++) { - if (i2BoardPtrTable[i]) { - iiResetDelay(i2BoardPtrTable[i]); - /* free io addresses and Tibet */ - release_region(ip2config.addr[i], 8); - device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i)); - device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, - 4 * i + 1)); - } - /* Disable and remove interrupt handler. */ - if (ip2config.irq[i] > 0 && - have_requested_irq(ip2config.irq[i])) { - free_irq(ip2config.irq[i], (void *)&pcName); - clear_requested_irq(ip2config.irq[i]); - } - } - class_destroy(ip2_class); - err = tty_unregister_driver(ip2_tty_driver); - if (err) - printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", - err); - put_tty_driver(ip2_tty_driver); - unregister_chrdev(IP2_IPL_MAJOR, pcIpl); - remove_proc_entry("ip2mem", NULL); - - /* free memory */ - for (i = 0; i < IP2_MAX_BOARDS; i++) { - void *pB; -#ifdef CONFIG_PCI - if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) { - pci_disable_device(ip2config.pci_dev[i]); - pci_dev_put(ip2config.pci_dev[i]); - ip2config.pci_dev[i] = NULL; - } -#endif - pB = i2BoardPtrTable[i]; - if (pB != NULL) { - kfree(pB); - i2BoardPtrTable[i] = NULL; - } - if (DevTableMem[i] != NULL) { - kfree(DevTableMem[i]); - DevTableMem[i] = NULL; - } - } -} -module_exit(ip2_cleanup_module); - -static const struct tty_operations ip2_ops = { - .open = ip2_open, - .close = ip2_close, - .write = ip2_write, - .put_char = ip2_putchar, - .flush_chars = ip2_flush_chars, - .write_room = ip2_write_room, - .chars_in_buffer = ip2_chars_in_buf, - .flush_buffer = ip2_flush_buffer, - .ioctl = ip2_ioctl, - .throttle = ip2_throttle, - .unthrottle = ip2_unthrottle, - .set_termios = ip2_set_termios, - .set_ldisc = ip2_set_line_discipline, - .stop = ip2_stop, - .start = ip2_start, - .hangup = ip2_hangup, - .tiocmget = ip2_tiocmget, - .tiocmset = ip2_tiocmset, - .get_icount = ip2_get_icount, - .proc_fops = &ip2_proc_fops, -}; - -/******************************************************************************/ -/* Function: ip2_loadmain() */ -/* Parameters: irq, io from command line of insmod et. al. */ -/* pointer to fip firmware and firmware size for boards */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This was the required entry point for all drivers (now in ip2.c) */ -/* It performs all */ -/* initialisation of the devices and driver structures, and registers itself */ -/* with the relevant kernel modules. */ -/******************************************************************************/ -/* IRQF_DISABLED - if set blocks all interrupts else only this line */ -/* IRQF_SHARED - for shared irq PCI or maybe EISA only */ -/* SA_RANDOM - can be source for cert. random number generators */ -#define IP2_SA_FLAGS 0 - - -static const struct firmware *ip2_request_firmware(void) -{ - struct platform_device *pdev; - const struct firmware *fw; - - pdev = platform_device_register_simple("ip2", 0, NULL, 0); - if (IS_ERR(pdev)) { - printk(KERN_ERR "Failed to register platform device for ip2\n"); - return NULL; - } - if (request_firmware(&fw, "intelliport2.bin", &pdev->dev)) { - printk(KERN_ERR "Failed to load firmware 'intelliport2.bin'\n"); - fw = NULL; - } - platform_device_unregister(pdev); - return fw; -} - -/****************************************************************************** - * ip2_setup: - * str: kernel command line string - * - * Can't autoprobe the boards so user must specify configuration on - * kernel command line. Sane people build it modular but the others - * come here. - * - * Alternating pairs of io,irq for up to 4 boards. - * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - * - * io=0 => No board - * io=1 => PCI - * io=2 => EISA - * else => ISA I/O address - * - * irq=0 or invalid for ISA will revert to polling mode - * - * Any value = -1, do not overwrite compiled in value. - * - ******************************************************************************/ -static int __init ip2_setup(char *str) -{ - int j, ints[10]; /* 4 boards, 2 parameters + 2 */ - unsigned int i; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - for (i = 0, j = 1; i < 4; i++) { - if (j > ints[0]) - break; - if (ints[j] >= 0) - io[i] = ints[j]; - j++; - if (j > ints[0]) - break; - if (ints[j] >= 0) - irq[i] = ints[j]; - j++; - } - return 1; -} -__setup("ip2=", ip2_setup); - -static int __init ip2_loadmain(void) -{ - int i, j, box; - int err = 0; - i2eBordStrPtr pB = NULL; - int rc = -1; - const struct firmware *fw = NULL; - char *str; - - str = cmd; - - if (poll_only) { - /* Hard lock the interrupts to zero */ - irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0; - } - - /* Check module parameter with 'ip2=' has been passed or not */ - if (!poll_only && (!strncmp(str, "ip2=", 4))) - ip2_setup(str); - - ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0); - - /* process command line arguments to modprobe or - insmod i.e. iop & irqp */ - /* irqp and iop should ALWAYS be specified now... But we check - them individually just to be sure, anyways... */ - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - ip2config.addr[i] = io[i]; - if (irq[i] >= 0) - ip2config.irq[i] = irq[i]; - else - ip2config.irq[i] = 0; - /* This is a little bit of a hack. If poll_only=1 on command - line back in ip2.c OR all IRQs on all specified boards are - explicitly set to 0, then drop to poll only mode and override - PCI or EISA interrupts. This superceeds the old hack of - triggering if all interrupts were zero (like da default). - Still a hack but less prone to random acts of terrorism. - - What we really should do, now that the IRQ default is set - to -1, is to use 0 as a hard coded, do not probe. - - /\/\|=mhw=|\/\/ - */ - poll_only |= irq[i]; - } - poll_only = !poll_only; - - /* Announce our presence */ - printk(KERN_INFO "%s version %s\n", pcName, pcVersion); - - ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS); - if (!ip2_tty_driver) - return -ENOMEM; - - /* Initialise all the boards we can find (up to the maximum). */ - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - switch (ip2config.addr[i]) { - case 0: /* skip this slot even if card is present */ - break; - default: /* ISA */ - /* ISA address must be specified */ - if (ip2config.addr[i] < 0x100 || - ip2config.addr[i] > 0x3f8) { - printk(KERN_ERR "IP2: Bad ISA board %d " - "address %x\n", i, - ip2config.addr[i]); - ip2config.addr[i] = 0; - break; - } - ip2config.type[i] = ISA; - - /* Check for valid irq argument, set for polling if - * invalid */ - if (ip2config.irq[i] && - !is_valid_irq(ip2config.irq[i])) { - printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n", - ip2config.irq[i]); - /* 0 is polling and is valid in that sense */ - ip2config.irq[i] = 0; - } - break; - case PCI: -#ifdef CONFIG_PCI - { - struct pci_dev *pdev = NULL; - u32 addr; - int status; - - pdev = pci_get_device(PCI_VENDOR_ID_COMPUTONE, - PCI_DEVICE_ID_COMPUTONE_IP2EX, pdev); - if (pdev == NULL) { - ip2config.addr[i] = 0; - printk(KERN_ERR "IP2: PCI board %d not " - "found\n", i); - break; - } - - if (pci_enable_device(pdev)) { - dev_err(&pdev->dev, "can't enable device\n"); - goto out; - } - ip2config.type[i] = PCI; - ip2config.pci_dev[i] = pci_dev_get(pdev); - status = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1, - &addr); - if (addr & 1) - ip2config.addr[i] = (USHORT)(addr & 0xfffe); - else - dev_err(&pdev->dev, "I/O address error\n"); - - ip2config.irq[i] = pdev->irq; -out: - pci_dev_put(pdev); - } -#else - printk(KERN_ERR "IP2: PCI card specified but PCI " - "support not enabled.\n"); - printk(KERN_ERR "IP2: Recompile kernel with CONFIG_PCI " - "defined!\n"); -#endif /* CONFIG_PCI */ - break; - case EISA: - ip2config.addr[i] = find_eisa_board(Eisa_slot + 1); - if (ip2config.addr[i] != 0) { - /* Eisa_irq set as side effect, boo */ - ip2config.type[i] = EISA; - } - ip2config.irq[i] = Eisa_irq; - break; - } /* switch */ - } /* for */ - - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - if (ip2config.addr[i]) { - pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL); - if (pB) { - i2BoardPtrTable[i] = pB; - iiSetAddress(pB, ip2config.addr[i], - ii2DelayTimer); - iiReset(pB); - } else - printk(KERN_ERR "IP2: board memory allocation " - "error\n"); - } - } - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - pB = i2BoardPtrTable[i]; - if (pB != NULL) { - iiResetDelay(pB); - break; - } - } - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - /* We don't want to request the firmware unless we have at - least one board */ - if (i2BoardPtrTable[i] != NULL) { - if (!fw) - fw = ip2_request_firmware(); - if (!fw) - break; - ip2_init_board(i, fw); - } - } - if (fw) - release_firmware(fw); - - ip2trace(ITRC_NO_PORT, ITRC_INIT, 2, 0); - - ip2_tty_driver->owner = THIS_MODULE; - ip2_tty_driver->name = "ttyF"; - ip2_tty_driver->driver_name = pcDriver_name; - ip2_tty_driver->major = IP2_TTY_MAJOR; - ip2_tty_driver->minor_start = 0; - ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL; - ip2_tty_driver->init_termios = tty_std_termios; - ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; - ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(ip2_tty_driver, &ip2_ops); - - ip2trace(ITRC_NO_PORT, ITRC_INIT, 3, 0); - - err = tty_register_driver(ip2_tty_driver); - if (err) { - printk(KERN_ERR "IP2: failed to register tty driver\n"); - put_tty_driver(ip2_tty_driver); - return err; /* leaking resources */ - } - - err = register_chrdev(IP2_IPL_MAJOR, pcIpl, &ip2_ipl); - if (err) { - printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", - err); - } else { - /* create the sysfs class */ - ip2_class = class_create(THIS_MODULE, "ip2"); - if (IS_ERR(ip2_class)) { - err = PTR_ERR(ip2_class); - goto out_chrdev; - } - } - /* Register the read_procmem thing */ - if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) { - printk(KERN_ERR "IP2: failed to register read_procmem\n"); - return -EIO; /* leaking resources */ - } - - ip2trace(ITRC_NO_PORT, ITRC_INIT, 4, 0); - /* Register the interrupt handler or poll handler, depending upon the - * specified interrupt. - */ - - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - if (ip2config.addr[i] == 0) - continue; - - pB = i2BoardPtrTable[i]; - if (pB != NULL) { - device_create(ip2_class, NULL, - MKDEV(IP2_IPL_MAJOR, 4 * i), - NULL, "ipl%d", i); - device_create(ip2_class, NULL, - MKDEV(IP2_IPL_MAJOR, 4 * i + 1), - NULL, "stat%d", i); - - for (box = 0; box < ABS_MAX_BOXES; box++) - for (j = 0; j < ABS_BIGGEST_BOX; j++) - if (pB->i2eChannelMap[box] & (1 << j)) - tty_register_device( - ip2_tty_driver, - j + ABS_BIGGEST_BOX * - (box+i*ABS_MAX_BOXES), - NULL); - } - - if (poll_only) { - /* Poll only forces driver to only use polling and - to ignore the probed PCI or EISA interrupts. */ - ip2config.irq[i] = CIR_POLL; - } - if (ip2config.irq[i] == CIR_POLL) { -retry: - if (!timer_pending(&PollTimer)) { - mod_timer(&PollTimer, POLL_TIMEOUT); - printk(KERN_INFO "IP2: polling\n"); - } - } else { - if (have_requested_irq(ip2config.irq[i])) - continue; - rc = request_irq(ip2config.irq[i], ip2_interrupt, - IP2_SA_FLAGS | - (ip2config.type[i] == PCI ? IRQF_SHARED : 0), - pcName, i2BoardPtrTable[i]); - if (rc) { - printk(KERN_ERR "IP2: request_irq failed: " - "error %d\n", rc); - ip2config.irq[i] = CIR_POLL; - printk(KERN_INFO "IP2: Polling %ld/sec.\n", - (POLL_TIMEOUT - jiffies)); - goto retry; - } - mark_requested_irq(ip2config.irq[i]); - /* Initialise the interrupt handler bottom half - * (aka slih). */ - } - } - - for (i = 0; i < IP2_MAX_BOARDS; ++i) { - if (i2BoardPtrTable[i]) { - /* set and enable board interrupt */ - set_irq(i, ip2config.irq[i]); - } - } - - ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0); - - return 0; - -out_chrdev: - unregister_chrdev(IP2_IPL_MAJOR, "ip2"); - /* unregister and put tty here */ - return err; -} -module_init(ip2_loadmain); - -/******************************************************************************/ -/* Function: ip2_init_board() */ -/* Parameters: Index of board in configuration structure */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This function initializes the specified board. The loadware is copied to */ -/* the board, the channel structures are initialized, and the board details */ -/* are reported on the console. */ -/******************************************************************************/ -static void -ip2_init_board(int boardnum, const struct firmware *fw) -{ - int i; - int nports = 0, nboxes = 0; - i2ChanStrPtr pCh; - i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; - - if ( !iiInitialize ( pB ) ) { - printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n", - pB->i2eBase, pB->i2eError ); - goto err_initialize; - } - printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1, - ip2config.addr[boardnum], ip2config.irq[boardnum] ); - - if (!request_region( ip2config.addr[boardnum], 8, pcName )) { - printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]); - goto err_initialize; - } - - if ( iiDownloadAll ( pB, (loadHdrStrPtr)fw->data, 1, fw->size ) - != II_DOWN_GOOD ) { - printk ( KERN_ERR "IP2: failed to download loadware\n" ); - goto err_release_region; - } else { - printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n", - pB->i2ePom.e.porVersion, - pB->i2ePom.e.porRevision, - pB->i2ePom.e.porSubRev, pB->i2eLVersion, - pB->i2eLRevision, pB->i2eLSub ); - } - - switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) { - - default: - printk( KERN_ERR "IP2: Unknown board type, ID = %x\n", - pB->i2ePom.e.porID ); - nports = 0; - goto err_release_region; - break; - - case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */ - printk ( KERN_INFO "IP2: ISA-4\n" ); - nports = 4; - break; - - case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */ - printk ( KERN_INFO "IP2: ISA-8 std\n" ); - nports = 8; - break; - - case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */ - printk ( KERN_INFO "IP2: ISA-8 RJ11\n" ); - nports = 8; - break; - - case POR_ID_FIIEX: /* IntelliPort IIEX */ - { - int portnum = IP2_PORTS_PER_BOARD * boardnum; - int box; - - for( box = 0; box < ABS_MAX_BOXES; ++box ) { - if ( pB->i2eChannelMap[box] != 0 ) { - ++nboxes; - } - for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { - if ( pB->i2eChannelMap[box] & 1<< i ) { - ++nports; - } - } - } - DevTableMem[boardnum] = pCh = - kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL ); - if ( !pCh ) { - printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); - goto err_release_region; - } - if ( !i2InitChannels( pB, nports, pCh ) ) { - printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); - kfree ( pCh ); - goto err_release_region; - } - pB->i2eChannelPtr = &DevTable[portnum]; - pB->i2eChannelCnt = ABS_MOST_PORTS; - - for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) { - for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { - if ( pB->i2eChannelMap[box] & (1 << i) ) { - DevTable[portnum + i] = pCh; - pCh->port_index = portnum + i; - pCh++; - } - } - } - printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n", - nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 ); - } - goto ex_exit; - } - DevTableMem[boardnum] = pCh = - kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL ); - if ( !pCh ) { - printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); - goto err_release_region; - } - pB->i2eChannelPtr = pCh; - pB->i2eChannelCnt = nports; - if ( !i2InitChannels( pB, nports, pCh ) ) { - printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); - kfree ( pCh ); - goto err_release_region; - } - pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum]; - - for( i = 0; i < pB->i2eChannelCnt; ++i ) { - DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh; - pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i; - pCh++; - } -ex_exit: - INIT_WORK(&pB->tqueue_interrupt, ip2_interrupt_bh); - return; - -err_release_region: - release_region(ip2config.addr[boardnum], 8); -err_initialize: - kfree ( pB ); - i2BoardPtrTable[boardnum] = NULL; - return; -} - -/******************************************************************************/ -/* Function: find_eisa_board ( int start_slot ) */ -/* Parameters: First slot to check */ -/* Returns: Address of EISA IntelliPort II controller */ -/* */ -/* Description: */ -/* This function searches for an EISA IntelliPort controller, starting */ -/* from the specified slot number. If the motherboard is not identified as an */ -/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */ -/* it returns the base address of the controller. */ -/******************************************************************************/ -static unsigned short -find_eisa_board( int start_slot ) -{ - int i, j; - unsigned int idm = 0; - unsigned int idp = 0; - unsigned int base = 0; - unsigned int value; - int setup_address; - int setup_irq; - int ismine = 0; - - /* - * First a check for an EISA motherboard, which we do by comparing the - * EISA ID registers for the system board and the first couple of slots. - * No slot ID should match the system board ID, but on an ISA or PCI - * machine the odds are that an empty bus will return similar values for - * each slot. - */ - i = 0x0c80; - value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3); - for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) { - j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3); - if ( value == j ) - return 0; - } - - /* - * OK, so we are inclined to believe that this is an EISA machine. Find - * an IntelliPort controller. - */ - for( i = start_slot; i < 16; i++ ) { - base = i << 12; - idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff); - idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff); - ismine = 0; - if ( idm == 0x0e8e ) { - if ( idp == 0x0281 || idp == 0x0218 ) { - ismine = 1; - } else if ( idp == 0x0282 || idp == 0x0283 ) { - ismine = 3; /* Can do edge-trigger */ - } - if ( ismine ) { - Eisa_slot = i; - break; - } - } - } - if ( !ismine ) - return 0; - - /* It's some sort of EISA card, but at what address is it configured? */ - - setup_address = base + 0xc88; - value = inb(base + 0xc86); - setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0; - - if ( (ismine & 2) && !(value & 0x10) ) { - ismine = 1; /* Could be edging, but not */ - } - - if ( Eisa_irq == 0 ) { - Eisa_irq = setup_irq; - } else if ( Eisa_irq != setup_irq ) { - printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" ); - } - -#ifdef IP2DEBUG_INIT -printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x", - base >> 12, idm, idp, setup_address); - if ( Eisa_irq ) { - printk(KERN_DEBUG ", Interrupt %d %s\n", - setup_irq, (ismine & 2) ? "(edge)" : "(level)"); - } else { - printk(KERN_DEBUG ", (polled)\n"); - } -#endif - return setup_address; -} - -/******************************************************************************/ -/* Function: set_irq() */ -/* Parameters: index to board in board table */ -/* IRQ to use */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/******************************************************************************/ -static void -set_irq( int boardnum, int boardIrq ) -{ - unsigned char tempCommand[16]; - i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; - unsigned long flags; - - /* - * Notify the boards they may generate interrupts. This is done by - * sending an in-line command to channel 0 on each board. This is why - * the channels have to be defined already. For each board, if the - * interrupt has never been defined, we must do so NOW, directly, since - * board will not send flow control or even give an interrupt until this - * is done. If polling we must send 0 as the interrupt parameter. - */ - - // We will get an interrupt here at the end of this function - - iiDisableMailIrq(pB); - - /* We build up the entire packet header. */ - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_INLINE; - CMD_COUNT_OF(tempCommand) = 2; - (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ; - (CMD_OF(tempCommand))[1] = boardIrq; - /* - * Write to FIFO; don't bother to adjust fifo capacity for this, since - * board will respond almost immediately after SendMail hit. - */ - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - iiWriteBuf(pB, tempCommand, 4); - write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); - pB->i2eUsingIrq = boardIrq; - pB->i2eOutMailWaiting |= MB_OUT_STUFFED; - - /* Need to update number of boards before you enable mailbox int */ - ++i2nBoards; - - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 6; - (CMD_OF(tempCommand))[0] = 88; // SILO - (CMD_OF(tempCommand))[1] = 64; // chars - (CMD_OF(tempCommand))[2] = 32; // ms - - (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK - (CMD_OF(tempCommand))[4] = 64; // chars - - (CMD_OF(tempCommand))[5] = 87; // HW_TEST - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - iiWriteBuf(pB, tempCommand, 8); - write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); - - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 1; - (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */ - iiWriteBuf(pB, tempCommand, 3); - -#ifdef XXX - // enable heartbeat for test porpoises - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 2; - (CMD_OF(tempCommand))[0] = 44; /* get ping */ - (CMD_OF(tempCommand))[1] = 200; /* 200 ms */ - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - iiWriteBuf(pB, tempCommand, 4); - write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); -#endif - - iiEnableMailIrq(pB); - iiSendPendingMail(pB); -} - -/******************************************************************************/ -/* Interrupt Handler Section */ -/******************************************************************************/ - -static inline void -service_all_boards(void) -{ - int i; - i2eBordStrPtr pB; - - /* Service every board on the list */ - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - pB = i2BoardPtrTable[i]; - if ( pB ) { - i2ServiceBoard( pB ); - } - } -} - - -/******************************************************************************/ -/* Function: ip2_interrupt_bh(work) */ -/* Parameters: work - pointer to the board structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* Service the board in a bottom half interrupt handler and then */ -/* reenable the board's interrupts if it has an IRQ number */ -/* */ -/******************************************************************************/ -static void -ip2_interrupt_bh(struct work_struct *work) -{ - i2eBordStrPtr pB = container_of(work, i2eBordStr, tqueue_interrupt); -// pB better well be set or we have a problem! We can only get -// here from the IMMEDIATE queue. Here, we process the boards. -// Checking pB doesn't cost much and it saves us from the sanity checkers. - - bh_counter++; - - if ( pB ) { - i2ServiceBoard( pB ); - if( pB->i2eUsingIrq ) { -// Re-enable his interrupts - iiEnableMailIrq(pB); - } - } -} - - -/******************************************************************************/ -/* Function: ip2_interrupt(int irq, void *dev_id) */ -/* Parameters: irq - interrupt number */ -/* pointer to optional device ID structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* Our task here is simply to identify each board which needs servicing. */ -/* If we are queuing then, queue it to be serviced, and disable its irq */ -/* mask otherwise process the board directly. */ -/* */ -/* We could queue by IRQ but that just complicates things on both ends */ -/* with very little gain in performance (how many instructions does */ -/* it take to iterate on the immediate queue). */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_irq_work(i2eBordStrPtr pB) -{ -#ifdef USE_IQI - if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) { -// Disable his interrupt (will be enabled when serviced) -// This is mostly to protect from reentrancy. - iiDisableMailIrq(pB); - -// Park the board on the immediate queue for processing. - schedule_work(&pB->tqueue_interrupt); - -// Make sure the immediate queue is flagged to fire. - } -#else - -// We are using immediate servicing here. This sucks and can -// cause all sorts of havoc with ppp and others. The failsafe -// check on iiSendPendingMail could also throw a hairball. - - i2ServiceBoard( pB ); - -#endif /* USE_IQI */ -} - -static void -ip2_polled_interrupt(void) -{ - int i; - i2eBordStrPtr pB; - - ip2trace(ITRC_NO_PORT, ITRC_INTR, 99, 1, 0); - - /* Service just the boards on the list using this irq */ - for( i = 0; i < i2nBoards; ++i ) { - pB = i2BoardPtrTable[i]; - -// Only process those boards which match our IRQ. -// IRQ = 0 for polled boards, we won't poll "IRQ" boards - - if (pB && pB->i2eUsingIrq == 0) - ip2_irq_work(pB); - } - - ++irq_counter; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); -} - -static irqreturn_t -ip2_interrupt(int irq, void *dev_id) -{ - i2eBordStrPtr pB = dev_id; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, pB->i2eUsingIrq ); - - ip2_irq_work(pB); - - ++irq_counter; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); - return IRQ_HANDLED; -} - -/******************************************************************************/ -/* Function: ip2_poll(unsigned long arg) */ -/* Parameters: ? */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function calls the library routine i2ServiceBoard for each board in */ -/* the board table. This is used instead of the interrupt routine when polled */ -/* mode is specified. */ -/******************************************************************************/ -static void -ip2_poll(unsigned long arg) -{ - ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 ); - - // Just polled boards, IRQ = 0 will hit all non-interrupt boards. - // It will NOT poll boards handled by hard interrupts. - // The issue of queued BH interrupts is handled in ip2_interrupt(). - ip2_polled_interrupt(); - - mod_timer(&PollTimer, POLL_TIMEOUT); - - ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); -} - -static void do_input(struct work_struct *work) -{ - i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_input); - unsigned long flags; - - ip2trace(CHANN, ITRC_INPUT, 21, 0 ); - - // Data input - if ( pCh->pTTY != NULL ) { - read_lock_irqsave(&pCh->Ibuf_spinlock, flags); - if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) { - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - i2Input( pCh ); - } else - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - } else { - ip2trace(CHANN, ITRC_INPUT, 22, 0 ); - - i2InputFlush( pCh ); - } -} - -// code duplicated from n_tty (ldisc) -static inline void isig(int sig, struct tty_struct *tty, int flush) -{ - /* FIXME: This is completely bogus */ - if (tty->pgrp) - kill_pgrp(tty->pgrp, sig, 1); - if (flush || !L_NOFLSH(tty)) { - if ( tty->ldisc->ops->flush_buffer ) - tty->ldisc->ops->flush_buffer(tty); - i2InputFlush( tty->driver_data ); - } -} - -static void do_status(struct work_struct *work) -{ - i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_status); - int status; - - status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) ); - - ip2trace (CHANN, ITRC_STATUS, 21, 1, status ); - - if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) { - if ( (status & I2_BRK) ) { - // code duplicated from n_tty (ldisc) - if (I_IGNBRK(pCh->pTTY)) - goto skip_this; - if (I_BRKINT(pCh->pTTY)) { - isig(SIGINT, pCh->pTTY, 1); - goto skip_this; - } - wake_up_interruptible(&pCh->pTTY->read_wait); - } -#ifdef NEVER_HAPPENS_AS_SETUP_XXX - // and can't work because we don't know the_char - // as the_char is reported on a separate path - // The intelligent board does this stuff as setup - { - char brkf = TTY_NORMAL; - unsigned char brkc = '\0'; - unsigned char tmp; - if ( (status & I2_BRK) ) { - brkf = TTY_BREAK; - brkc = '\0'; - } - else if (status & I2_PAR) { - brkf = TTY_PARITY; - brkc = the_char; - } else if (status & I2_FRA) { - brkf = TTY_FRAME; - brkc = the_char; - } else if (status & I2_OVR) { - brkf = TTY_OVERRUN; - brkc = the_char; - } - tmp = pCh->pTTY->real_raw; - pCh->pTTY->real_raw = 0; - pCh->pTTY->ldisc->ops.receive_buf( pCh->pTTY, &brkc, &brkf, 1 ); - pCh->pTTY->real_raw = tmp; - } -#endif /* NEVER_HAPPENS_AS_SETUP_XXX */ - } -skip_this: - - if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) { - wake_up_interruptible(&pCh->delta_msr_wait); - - if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) { - if ( status & I2_DCD ) { - if ( pCh->wopen ) { - wake_up_interruptible ( &pCh->open_wait ); - } - } else { - if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) { - tty_hangup( pCh->pTTY ); - } - } - } - } - - ip2trace (CHANN, ITRC_STATUS, 26, 0 ); -} - -/******************************************************************************/ -/* Device Open/Close/Ioctl Entry Point Section */ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: open_sanity_check() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* Verifies the structure magic numbers and cross links. */ -/******************************************************************************/ -#ifdef IP2DEBUG_OPEN -static void -open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd ) -{ - if ( pBrd->i2eValid != I2E_MAGIC ) { - printk(KERN_ERR "IP2: invalid board structure\n" ); - } else if ( pBrd != pCh->pMyBord ) { - printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n", - pCh->pMyBord ); - } else if ( pBrd->i2eChannelCnt < pCh->port_index ) { - printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index ); - } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) { - } else { - printk(KERN_INFO "IP2: all pointers check out!\n" ); - } -} -#endif - - -/******************************************************************************/ -/* Function: ip2_open() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: (MANDATORY) */ -/* A successful device open has to run a gauntlet of checks before it */ -/* completes. After some sanity checking and pointer setup, the function */ -/* blocks until all conditions are satisfied. It then initialises the port to */ -/* the default characteristics and returns. */ -/******************************************************************************/ -static int -ip2_open( PTTY tty, struct file *pFile ) -{ - wait_queue_t wait; - int rc = 0; - int do_clocal = 0; - i2ChanStrPtr pCh = DevTable[tty->index]; - - ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 ); - - if ( pCh == NULL ) { - return -ENODEV; - } - /* Setup pointer links in device and tty structures */ - pCh->pTTY = tty; - tty->driver_data = pCh; - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG \ - "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n", - tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index); - open_sanity_check ( pCh, pCh->pMyBord ); -#endif - - i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - serviceOutgoingFifo( pCh->pMyBord ); - - /* Block here until the port is ready (per serial and istallion) */ - /* - * 1. If the port is in the middle of closing wait for the completion - * and then return the appropriate error. - */ - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->close_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { - if ( pCh->flags & ASYNC_CLOSING ) { - tty_unlock(); - schedule(); - tty_lock(); - } - if ( tty_hung_up_p(pFile) ) { - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->close_wait, &wait); - return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS; - } - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->close_wait, &wait); - - /* - * 3. Handle a non-blocking open of a normal port. - */ - if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<flags |= ASYNC_NORMAL_ACTIVE; - goto noblock; - } - /* - * 4. Now loop waiting for the port to be free and carrier present - * (if required). - */ - if ( tty->termios->c_cflag & CLOCAL ) - do_clocal = 1; - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal); -#endif - - ++pCh->wopen; - - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->open_wait, &wait); - - for(;;) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - set_current_state( TASK_INTERRUPTIBLE ); - serviceOutgoingFifo( pCh->pMyBord ); - if ( tty_hung_up_p(pFile) ) { - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->open_wait, &wait); - return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS; - } - if (!(pCh->flags & ASYNC_CLOSING) && - (do_clocal || (pCh->dataSetIn & I2_DCD) )) { - rc = 0; - break; - } - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "ASYNC_CLOSING = %s\n", - (pCh->flags & ASYNC_CLOSING)?"True":"False"); - printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n"); -#endif - ip2trace (CHANN, ITRC_OPEN, 3, 2, 0, - (pCh->flags & ASYNC_CLOSING) ); - /* check for signal */ - if (signal_pending(current)) { - rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); - break; - } - tty_unlock(); - schedule(); - tty_lock(); - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->open_wait, &wait); - - --pCh->wopen; //why count? - - ip2trace (CHANN, ITRC_OPEN, 4, 0 ); - - if (rc != 0 ) { - return rc; - } - pCh->flags |= ASYNC_NORMAL_ACTIVE; - -noblock: - - /* first open - Assign termios structure to port */ - if ( tty->count == 1 ) { - i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - /* Now we must send the termios settings to the loadware */ - set_params( pCh, NULL ); - } - - /* - * Now set any i2lib options. These may go away if the i2lib code ends - * up rolled into the mainline. - */ - pCh->channelOptions |= CO_NBLOCK_WRITE; - -#ifdef IP2DEBUG_OPEN - printk (KERN_DEBUG "IP2: open completed\n" ); -#endif - serviceOutgoingFifo( pCh->pMyBord ); - - ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 ); - - return 0; -} - -/******************************************************************************/ -/* Function: ip2_close() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_close( PTTY tty, struct file *pFile ) -{ - i2ChanStrPtr pCh = tty->driver_data; - - if ( !pCh ) { - return; - } - - ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 ); - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "IP2:close %s:\n",tty->name); -#endif - - if ( tty_hung_up_p ( pFile ) ) { - - ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 ); - - return; - } - if ( tty->count > 1 ) { /* not the last close */ - - ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 ); - - return; - } - pCh->flags |= ASYNC_CLOSING; // last close actually - - tty->closing = 1; - - if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) { - /* - * Before we drop DTR, make sure the transmitter has completely drained. - * This uses an timeout, after which the close - * completes. - */ - ip2_wait_until_sent(tty, pCh->ClosingWaitTime ); - } - /* - * At this point we stop accepting input. Here we flush the channel - * input buffer which will allow the board to send up more data. Any - * additional input is tossed at interrupt/poll time. - */ - i2InputFlush( pCh ); - - /* disable DSS reporting */ - i2QueueCommands(PTYPE_INLINE, pCh, 100, 4, - CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - if (tty->termios->c_cflag & HUPCL) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - } - - serviceOutgoingFifo ( pCh->pMyBord ); - - tty_ldisc_flush(tty); - tty_driver_flush_buffer(tty); - tty->closing = 0; - - pCh->pTTY = NULL; - - if (pCh->wopen) { - if (pCh->ClosingDelay) { - msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay)); - } - wake_up_interruptible(&pCh->open_wait); - } - - pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&pCh->close_wait); - -#ifdef IP2DEBUG_OPEN - DBG_CNT("ip2_close: after wakeups--"); -#endif - - - ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 ); - - return; -} - -/******************************************************************************/ -/* Function: ip2_hangup() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_hangup ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - - if( !pCh ) { - return; - } - - ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 ); - - ip2_flush_buffer(tty); - - /* disable DSS reporting */ - - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP); - i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - if ( (tty->termios->c_cflag & HUPCL) ) { - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - } - i2QueueCommands(PTYPE_INLINE, pCh, 1, 3, - CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - serviceOutgoingFifo ( pCh->pMyBord ); - - wake_up_interruptible ( &pCh->delta_msr_wait ); - - pCh->flags &= ~ASYNC_NORMAL_ACTIVE; - pCh->pTTY = NULL; - wake_up_interruptible ( &pCh->open_wait ); - - ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 ); -} - -/******************************************************************************/ -/******************************************************************************/ -/* Device Output Section */ -/******************************************************************************/ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_write() */ -/* Parameters: Pointer to tty structure */ -/* Flag denoting data is in user (1) or kernel (0) space */ -/* Pointer to data */ -/* Number of bytes to write */ -/* Returns: Number of bytes actually written */ -/* */ -/* Description: (MANDATORY) */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_write( PTTY tty, const unsigned char *pData, int count) -{ - i2ChanStrPtr pCh = tty->driver_data; - int bytesSent = 0; - unsigned long flags; - - ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 ); - - /* Flush out any buffered data left over from ip2_putchar() calls. */ - ip2_flush_chars( tty ); - - /* This is the actual move bit. Make sure it does what we need!!!!! */ - write_lock_irqsave(&pCh->Pbuf_spinlock, flags); - bytesSent = i2Output( pCh, pData, count); - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - - ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent ); - - return bytesSent > 0 ? bytesSent : 0; -} - -/******************************************************************************/ -/* Function: ip2_putchar() */ -/* Parameters: Pointer to tty structure */ -/* Character to write */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_putchar( PTTY tty, unsigned char ch ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - -// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch ); - - write_lock_irqsave(&pCh->Pbuf_spinlock, flags); - pCh->Pbuf[pCh->Pbuf_stuff++] = ch; - if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) { - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - ip2_flush_chars( tty ); - } else - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - return 1; - -// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch ); -} - -/******************************************************************************/ -/* Function: ip2_flush_chars() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/******************************************************************************/ -static void -ip2_flush_chars( PTTY tty ) -{ - int strip; - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - write_lock_irqsave(&pCh->Pbuf_spinlock, flags); - if ( pCh->Pbuf_stuff ) { - -// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip ); - - // - // We may need to restart i2Output if it does not fullfill this request - // - strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff); - if ( strip != pCh->Pbuf_stuff ) { - memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip ); - } - pCh->Pbuf_stuff -= strip; - } - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); -} - -/******************************************************************************/ -/* Function: ip2_write_room() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Number of bytes that the driver can accept */ -/* */ -/* Description: */ -/* */ -/******************************************************************************/ -static int -ip2_write_room ( PTTY tty ) -{ - int bytesFree; - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - read_lock_irqsave(&pCh->Pbuf_spinlock, flags); - bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff; - read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - - ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree ); - - return ((bytesFree > 0) ? bytesFree : 0); -} - -/******************************************************************************/ -/* Function: ip2_chars_in_buf() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Number of bytes queued for transmission */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_chars_in_buf ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - int rc; - unsigned long flags; - - ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff ); - -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n", - pCh->Obuf_char_count + pCh->Pbuf_stuff, - pCh->Obuf_char_count, pCh->Pbuf_stuff ); -#endif - read_lock_irqsave(&pCh->Obuf_spinlock, flags); - rc = pCh->Obuf_char_count; - read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - read_lock_irqsave(&pCh->Pbuf_spinlock, flags); - rc += pCh->Pbuf_stuff; - read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - return rc; -} - -/******************************************************************************/ -/* Function: ip2_flush_buffer() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_flush_buffer( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 ); - -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: flush buffer\n" ); -#endif - write_lock_irqsave(&pCh->Pbuf_spinlock, flags); - pCh->Pbuf_stuff = 0; - write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); - i2FlushOutput( pCh ); - ip2_owake(tty); - - ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 ); - -} - -/******************************************************************************/ -/* Function: ip2_wait_until_sent() */ -/* Parameters: Pointer to tty structure */ -/* Timeout for wait. */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function is used in place of the normal tty_wait_until_sent, which */ -/* only waits for the driver buffers to be empty (or rather, those buffers */ -/* reported by chars_in_buffer) which doesn't work for IP2 due to the */ -/* indeterminate number of bytes buffered on the board. */ -/******************************************************************************/ -static void -ip2_wait_until_sent ( PTTY tty, int timeout ) -{ - int i = jiffies; - i2ChanStrPtr pCh = tty->driver_data; - - tty_wait_until_sent(tty, timeout ); - if ( (i = timeout - (jiffies -i)) > 0) - i2DrainOutput( pCh, i ); -} - -/******************************************************************************/ -/******************************************************************************/ -/* Device Input Section */ -/******************************************************************************/ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_throttle() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_throttle ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "IP2: throttle\n" ); -#endif - /* - * Signal the poll/interrupt handlers not to forward incoming data to - * the line discipline. This will cause the buffers to fill up in the - * library and thus cause the library routines to send the flow control - * stuff. - */ - pCh->throttled = 1; -} - -/******************************************************************************/ -/* Function: ip2_unthrottle() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_unthrottle ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "IP2: unthrottle\n" ); -#endif - - /* Pass incoming data up to the line discipline again. */ - pCh->throttled = 0; - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); - serviceOutgoingFifo( pCh->pMyBord ); - read_lock_irqsave(&pCh->Ibuf_spinlock, flags); - if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) { - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "i2Input called from unthrottle\n" ); -#endif - i2Input( pCh ); - } else - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); -} - -static void -ip2_start ( PTTY tty ) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME); -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: start tx\n" ); -#endif -} - -static void -ip2_stop ( PTTY tty ) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND); -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: stop tx\n" ); -#endif -} - -/******************************************************************************/ -/* Device Ioctl Section */ -/******************************************************************************/ - -static int ip2_tiocmget(struct tty_struct *tty) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; -#ifdef ENABLE_DSSNOW - wait_queue_t wait; -#endif - - if (pCh == NULL) - return -ENODEV; - -/* - FIXME - the following code is causing a NULL pointer dereference in - 2.3.51 in an interrupt handler. It's suppose to prompt the board - to return the DSS signal status immediately. Why doesn't it do - the same thing in 2.2.14? -*/ - -/* This thing is still busted in the 1.2.12 driver on 2.4.x - and even hoses the serial console so the oops can be trapped. - /\/\|=mhw=|\/\/ */ - -#ifdef ENABLE_DSSNOW - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW); - - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->dss_now_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - serviceOutgoingFifo( pCh->pMyBord ); - - schedule(); - - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->dss_now_wait, &wait); - - if (signal_pending(current)) { - return -EINTR; - } -#endif - return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0) - | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0) - | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0) - | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0) - | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0) - | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); -} - -static int ip2_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - if (pCh == NULL) - return -ENODEV; - - if (set & TIOCM_RTS) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP); - pCh->dataSetOut |= I2_RTS; - } - if (set & TIOCM_DTR) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP); - pCh->dataSetOut |= I2_DTR; - } - - if (clear & TIOCM_RTS) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN); - pCh->dataSetOut &= ~I2_RTS; - } - if (clear & TIOCM_DTR) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN); - pCh->dataSetOut &= ~I2_DTR; - } - serviceOutgoingFifo( pCh->pMyBord ); - return 0; -} - -/******************************************************************************/ -/* Function: ip2_ioctl() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Command */ -/* Argument */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_ioctl ( PTTY tty, UINT cmd, ULONG arg ) -{ - wait_queue_t wait; - i2ChanStrPtr pCh = DevTable[tty->index]; - i2eBordStrPtr pB; - struct async_icount cprev, cnow; /* kernel counter temps */ - int rc = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; - - if ( pCh == NULL ) - return -ENODEV; - - pB = pCh->pMyBord; - - ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg ); - -#ifdef IP2DEBUG_IOCTL - printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg ); -#endif - - switch(cmd) { - case TIOCGSERIAL: - - ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc ); - - rc = get_serial_info(pCh, argp); - if (rc) - return rc; - break; - - case TIOCSSERIAL: - - ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc ); - - rc = set_serial_info(pCh, argp); - if (rc) - return rc; - break; - - case TCXONC: - rc = tty_check_change(tty); - if (rc) - return rc; - switch (arg) { - case TCOOFF: - //return -ENOIOCTLCMD; - break; - case TCOON: - //return -ENOIOCTLCMD; - break; - case TCIOFF: - if (STOP_CHAR(tty) != __DISABLED_CHAR) { - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, - CMD_XMIT_NOW(STOP_CHAR(tty))); - } - break; - case TCION: - if (START_CHAR(tty) != __DISABLED_CHAR) { - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, - CMD_XMIT_NOW(START_CHAR(tty))); - } - break; - default: - return -EINVAL; - } - return 0; - - case TCSBRK: /* SVID version: non-zero arg --> no break */ - rc = tty_check_change(tty); - - ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc ); - - if (!rc) { - ip2_wait_until_sent(tty,0); - if (!arg) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250)); - serviceOutgoingFifo( pCh->pMyBord ); - } - } - break; - - case TCSBRKP: /* support for POSIX tcsendbreak() */ - rc = tty_check_change(tty); - - ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc ); - - if (!rc) { - ip2_wait_until_sent(tty,0); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_SEND_BRK(arg ? arg*100 : 250)); - serviceOutgoingFifo ( pCh->pMyBord ); - } - break; - - case TIOCGSOFTCAR: - - ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc ); - - rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); - if (rc) - return rc; - break; - - case TIOCSSOFTCAR: - - ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc ); - - rc = get_user(arg,(unsigned long __user *) argp); - if (rc) - return rc; - tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) - | (arg ? CLOCAL : 0)); - - break; - - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask - * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS - * for masking). Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - write_lock_irqsave(&pB->read_fifo_spinlock, flags); - cprev = pCh->icount; /* note the counters on entry */ - write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4, - CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP); - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->delta_msr_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - serviceOutgoingFifo( pCh->pMyBord ); - for(;;) { - ip2trace (CHANN, ITRC_IOCTL, 10, 0 ); - - schedule(); - - ip2trace (CHANN, ITRC_IOCTL, 11, 0 ); - - /* see if a signal did it */ - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - write_lock_irqsave(&pB->read_fifo_spinlock, flags); - cnow = pCh->icount; /* atomic copy */ - write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; /* no change => rc */ - break; - } - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - rc = 0; - break; - } - cprev = cnow; - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->delta_msr_wait, &wait); - - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3, - CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - if ( ! (pCh->flags & ASYNC_CHECK_CD)) { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP); - } - serviceOutgoingFifo( pCh->pMyBord ); - return rc; - break; - - /* - * The rest are not supported by this driver. By returning -ENOIOCTLCMD they - * will be passed to the line discipline for it to handle. - */ - case TIOCSERCONFIG: - case TIOCSERGWILD: - case TIOCSERGETLSR: - case TIOCSERSWILD: - case TIOCSERGSTRUCT: - case TIOCSERGETMULTI: - case TIOCSERSETMULTI: - - default: - ip2trace (CHANN, ITRC_IOCTL, 12, 0 ); - - rc = -ENOIOCTLCMD; - break; - } - - ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 ); - - return rc; -} - -static int ip2_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - i2eBordStrPtr pB; - struct async_icount cnow; /* kernel counter temp */ - unsigned long flags; - - if ( pCh == NULL ) - return -ENODEV; - - pB = pCh->pMyBord; - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for RI where - * only 0->1 is counted. The controller is quite capable of counting - * both, but this done to preserve compatibility with the standard - * serial driver. - */ - - write_lock_irqsave(&pB->read_fifo_spinlock, flags); - cnow = pCh->icount; - write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - return 0; -} - -/******************************************************************************/ -/* Function: GetSerialInfo() */ -/* Parameters: Pointer to channel structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This is to support the setserial command, and requires processing of the */ -/* standard Linux serial structure. */ -/******************************************************************************/ -static int -get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo ) -{ - struct serial_struct tmp; - - memset ( &tmp, 0, sizeof(tmp) ); - tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16]; - if (BID_HAS_654(tmp.type)) { - tmp.type = PORT_16650; - } else { - tmp.type = PORT_CIRRUS; - } - tmp.line = pCh->port_index; - tmp.port = pCh->pMyBord->i2eBase; - tmp.irq = ip2config.irq[pCh->port_index/64]; - tmp.flags = pCh->flags; - tmp.baud_base = pCh->BaudBase; - tmp.close_delay = pCh->ClosingDelay; - tmp.closing_wait = pCh->ClosingWaitTime; - tmp.custom_divisor = pCh->BaudDivisor; - return copy_to_user(retinfo,&tmp,sizeof(*retinfo)); -} - -/******************************************************************************/ -/* Function: SetSerialInfo() */ -/* Parameters: Pointer to channel structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function provides support for setserial, which uses the TIOCSSERIAL */ -/* ioctl. Not all setserial parameters are relevant. If the user attempts to */ -/* change the IRQ, address or type of the port the ioctl fails. */ -/******************************************************************************/ -static int -set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info ) -{ - struct serial_struct ns; - int old_flags, old_baud_divisor; - - if (copy_from_user(&ns, new_info, sizeof (ns))) - return -EFAULT; - - /* - * We don't allow setserial to change IRQ, board address, type or baud - * base. Also line nunber as such is meaningless but we use it for our - * array index so it is fixed also. - */ - if ( (ns.irq != ip2config.irq[pCh->port_index]) - || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase))) - || (ns.baud_base != pCh->BaudBase) - || (ns.line != pCh->port_index) ) { - return -EINVAL; - } - - old_flags = pCh->flags; - old_baud_divisor = pCh->BaudDivisor; - - if ( !capable(CAP_SYS_ADMIN) ) { - if ( ( ns.close_delay != pCh->ClosingDelay ) || - ( (ns.flags & ~ASYNC_USR_MASK) != - (pCh->flags & ~ASYNC_USR_MASK) ) ) { - return -EPERM; - } - - pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) | - (ns.flags & ASYNC_USR_MASK); - pCh->BaudDivisor = ns.custom_divisor; - } else { - pCh->flags = (pCh->flags & ~ASYNC_FLAGS) | - (ns.flags & ASYNC_FLAGS); - pCh->BaudDivisor = ns.custom_divisor; - pCh->ClosingDelay = ns.close_delay * HZ/100; - pCh->ClosingWaitTime = ns.closing_wait * HZ/100; - } - - if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) ) - || (old_baud_divisor != pCh->BaudDivisor) ) { - // Invalidate speed and reset parameters - set_params( pCh, NULL ); - } - - return 0; -} - -/******************************************************************************/ -/* Function: ip2_set_termios() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_set_termios( PTTY tty, struct ktermios *old_termios ) -{ - i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data; - -#ifdef IP2DEBUG_IOCTL - printk (KERN_DEBUG "IP2: set termios %p\n", old_termios ); -#endif - - set_params( pCh, old_termios ); -} - -/******************************************************************************/ -/* Function: ip2_set_line_discipline() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: Does nothing */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_set_line_discipline ( PTTY tty ) -{ -#ifdef IP2DEBUG_IOCTL - printk (KERN_DEBUG "IP2: set line discipline\n" ); -#endif - - ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 ); - -} - -/******************************************************************************/ -/* Function: SetLine Characteristics() */ -/* Parameters: Pointer to channel structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This routine is called to update the channel structure with the new line */ -/* characteristics, and send the appropriate commands to the board when they */ -/* change. */ -/******************************************************************************/ -static void -set_params( i2ChanStrPtr pCh, struct ktermios *o_tios ) -{ - tcflag_t cflag, iflag, lflag; - char stop_char, start_char; - struct ktermios dummy; - - lflag = pCh->pTTY->termios->c_lflag; - cflag = pCh->pTTY->termios->c_cflag; - iflag = pCh->pTTY->termios->c_iflag; - - if (o_tios == NULL) { - dummy.c_lflag = ~lflag; - dummy.c_cflag = ~cflag; - dummy.c_iflag = ~iflag; - o_tios = &dummy; - } - - { - switch ( cflag & CBAUD ) { - case B0: - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag); - goto service_it; - break; - case B38400: - /* - * This is the speed that is overloaded with all the other high - * speeds, depending upon the flag settings. - */ - if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) { - pCh->speed = CBR_57600; - } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) { - pCh->speed = CBR_115200; - } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) { - pCh->speed = CBR_C1; - } else { - pCh->speed = CBR_38400; - } - break; - case B50: pCh->speed = CBR_50; break; - case B75: pCh->speed = CBR_75; break; - case B110: pCh->speed = CBR_110; break; - case B134: pCh->speed = CBR_134; break; - case B150: pCh->speed = CBR_150; break; - case B200: pCh->speed = CBR_200; break; - case B300: pCh->speed = CBR_300; break; - case B600: pCh->speed = CBR_600; break; - case B1200: pCh->speed = CBR_1200; break; - case B1800: pCh->speed = CBR_1800; break; - case B2400: pCh->speed = CBR_2400; break; - case B4800: pCh->speed = CBR_4800; break; - case B9600: pCh->speed = CBR_9600; break; - case B19200: pCh->speed = CBR_19200; break; - case B57600: pCh->speed = CBR_57600; break; - case B115200: pCh->speed = CBR_115200; break; - case B153600: pCh->speed = CBR_153600; break; - case B230400: pCh->speed = CBR_230400; break; - case B307200: pCh->speed = CBR_307200; break; - case B460800: pCh->speed = CBR_460800; break; - case B921600: pCh->speed = CBR_921600; break; - default: pCh->speed = CBR_9600; break; - } - if ( pCh->speed == CBR_C1 ) { - // Process the custom speed parameters. - int bps = pCh->BaudBase / pCh->BaudDivisor; - if ( bps == 921600 ) { - pCh->speed = CBR_921600; - } else { - bps = bps/10; - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) ); - } - } - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed)); - - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - } - if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag)) - { - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, - CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1)); - } - if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag)) - { - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, - CMD_SETPAR( - (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP) - ) - ); - } - /* byte size and parity */ - if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag)) - { - int datasize; - switch ( cflag & CSIZE ) { - case CS5: datasize = CSZ_5; break; - case CS6: datasize = CSZ_6; break; - case CS7: datasize = CSZ_7; break; - case CS8: datasize = CSZ_8; break; - default: datasize = CSZ_5; break; /* as per serial.c */ - } - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) ); - } - /* Process CTS flow control flag setting */ - if ( (cflag & CRTSCTS) ) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, - 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB); - } else { - i2QueueCommands(PTYPE_INLINE, pCh, 100, - 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - } - // - // Process XON/XOFF flow control flags settings - // - stop_char = STOP_CHAR(pCh->pTTY); - start_char = START_CHAR(pCh->pTTY); - - //////////// can't be \000 - if (stop_char == __DISABLED_CHAR ) - { - stop_char = ~__DISABLED_CHAR; - } - if (start_char == __DISABLED_CHAR ) - { - start_char = ~__DISABLED_CHAR; - } - ///////////////////////////////// - - if ( o_tios->c_cc[VSTART] != start_char ) - { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char)); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char)); - } - if ( o_tios->c_cc[VSTOP] != stop_char ) - { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char)); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char)); - } - if (stop_char == __DISABLED_CHAR ) - { - stop_char = ~__DISABLED_CHAR; //TEST123 - goto no_xoff; - } - if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF))) - { - if ( iflag & IXOFF ) { // Enable XOFF output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON)); - } else { // Disable XOFF output flow control -no_xoff: - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE)); - } - } - if (start_char == __DISABLED_CHAR ) - { - goto no_xon; - } - if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY))) - { - if ( iflag & IXON ) { - if ( iflag & IXANY ) { // Enable XON/XANY output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY)); - } else { // Enable XON output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON)); - } - } else { // Disable XON output flow control -no_xon: - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE)); - } - } - if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) ) - { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0))); - } - if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) ) - { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB)); - } - - if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) - ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) ) - { - char brkrpt = 0; - char parrpt = 0; - - if ( iflag & IGNBRK ) { /* Ignore breaks altogether */ - /* Ignore breaks altogether */ - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP); - } else { - if ( iflag & BRKINT ) { - if ( iflag & PARMRK ) { - brkrpt = 0x0a; // exception an inline triple - } else { - brkrpt = 0x1a; // exception and NULL - } - brkrpt |= 0x04; // flush input - } else { - if ( iflag & PARMRK ) { - brkrpt = 0x0b; //POSIX triple \0377 \0 \0 - } else { - brkrpt = 0x01; // Null only - } - } - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt)); - } - - if (iflag & IGNPAR) { - parrpt = 0x20; - /* would be 2 for not cirrus bug */ - /* would be 0x20 cept for cirrus bug */ - } else { - if ( iflag & PARMRK ) { - /* - * Replace error characters with 3-byte sequence (\0377,\0,char) - */ - parrpt = 0x04 ; - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0)); - } else { - parrpt = 0x03; - } - } - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt)); - } - if (cflag & CLOCAL) { - // Status reporting fails for DCD if this is off - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP); - pCh->flags &= ~ASYNC_CHECK_CD; - } else { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP); - pCh->flags |= ASYNC_CHECK_CD; - } - -service_it: - i2DrainOutput( pCh, 100 ); -} - -/******************************************************************************/ -/* IPL Device Section */ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_ipl_read() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Pointer to data */ -/* Number of bytes to read */ -/* Returns: Success or failure */ -/* */ -/* Description: Ugly */ -/* */ -/* */ -/******************************************************************************/ - -static -ssize_t -ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off ) -{ - unsigned int minor = iminor(pFile->f_path.dentry->d_inode); - int rc = 0; - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count ); -#endif - - switch( minor ) { - case 0: // IPL device - rc = -EINVAL; - break; - case 1: // Status dump - rc = -EINVAL; - break; - case 2: // Ping device - rc = -EINVAL; - break; - case 3: // Trace device - rc = DumpTraceBuffer ( pData, count ); - break; - case 4: // Trace device - rc = DumpFifoBuffer ( pData, count ); - break; - default: - rc = -ENODEV; - break; - } - return rc; -} - -static int -DumpFifoBuffer ( char __user *pData, int count ) -{ -#ifdef DEBUG_FIFO - int rc; - rc = copy_to_user(pData, DBGBuf, count); - - printk(KERN_DEBUG "Last index %d\n", I ); - - return count; -#endif /* DEBUG_FIFO */ - return 0; -} - -static int -DumpTraceBuffer ( char __user *pData, int count ) -{ -#ifdef IP2DEBUG_TRACE - int rc; - int dumpcount; - int chunk; - int *pIndex = (int __user *)pData; - - if ( count < (sizeof(int) * 6) ) { - return -EIO; - } - rc = put_user(tracewrap, pIndex ); - rc = put_user(TRACEMAX, ++pIndex ); - rc = put_user(tracestrip, ++pIndex ); - rc = put_user(tracestuff, ++pIndex ); - pData += sizeof(int) * 6; - count -= sizeof(int) * 6; - - dumpcount = tracestuff - tracestrip; - if ( dumpcount < 0 ) { - dumpcount += TRACEMAX; - } - if ( dumpcount > count ) { - dumpcount = count; - } - chunk = TRACEMAX - tracestrip; - if ( dumpcount > chunk ) { - rc = copy_to_user(pData, &tracebuf[tracestrip], - chunk * sizeof(tracebuf[0]) ); - pData += chunk * sizeof(tracebuf[0]); - tracestrip = 0; - chunk = dumpcount - chunk; - } else { - chunk = dumpcount; - } - rc = copy_to_user(pData, &tracebuf[tracestrip], - chunk * sizeof(tracebuf[0]) ); - tracestrip += chunk; - tracewrap = 0; - - rc = put_user(tracestrip, ++pIndex ); - rc = put_user(tracestuff, ++pIndex ); - - return dumpcount; -#else - return 0; -#endif -} - -/******************************************************************************/ -/* Function: ip2_ipl_write() */ -/* Parameters: */ -/* Pointer to file structure */ -/* Pointer to data */ -/* Number of bytes to write */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static ssize_t -ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off) -{ -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count ); -#endif - return 0; -} - -/******************************************************************************/ -/* Function: ip2_ipl_ioctl() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Command */ -/* Argument */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static long -ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg ) -{ - unsigned int iplminor = iminor(pFile->f_path.dentry->d_inode); - int rc = 0; - void __user *argp = (void __user *)arg; - ULONG __user *pIndex = argp; - i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4]; - i2ChanStrPtr pCh; - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg ); -#endif - - mutex_lock(&ip2_mutex); - - switch ( iplminor ) { - case 0: // IPL device - rc = -EINVAL; - break; - case 1: // Status dump - case 5: - case 9: - case 13: - switch ( cmd ) { - case 64: /* Driver - ip2stat */ - rc = put_user(-1, pIndex++ ); - rc = put_user(irq_counter, pIndex++ ); - rc = put_user(bh_counter, pIndex++ ); - break; - - case 65: /* Board - ip2stat */ - if ( pB ) { - rc = copy_to_user(argp, pB, sizeof(i2eBordStr)); - rc = put_user(inb(pB->i2eStatus), - (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) ); - } else { - rc = -ENODEV; - } - break; - - default: - if (cmd < IP2_MAX_PORTS) { - pCh = DevTable[cmd]; - if ( pCh ) - { - rc = copy_to_user(argp, pCh, sizeof(i2ChanStr)); - if (rc) - rc = -EFAULT; - } else { - rc = -ENODEV; - } - } else { - rc = -EINVAL; - } - } - break; - - case 2: // Ping device - rc = -EINVAL; - break; - case 3: // Trace device - /* - * akpm: This used to write a whole bunch of function addresses - * to userspace, which generated lots of put_user() warnings. - * I killed it all. Just return "success" and don't do - * anything. - */ - if (cmd == 1) - rc = 0; - else - rc = -EINVAL; - break; - - default: - rc = -ENODEV; - break; - } - mutex_unlock(&ip2_mutex); - return rc; -} - -/******************************************************************************/ -/* Function: ip2_ipl_open() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_ipl_open( struct inode *pInode, struct file *pFile ) -{ - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: open\n" ); -#endif - return 0; -} - -static int -proc_ip2mem_show(struct seq_file *m, void *v) -{ - i2eBordStrPtr pB; - i2ChanStrPtr pCh; - PTTY tty; - int i; - -#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n" -#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n" -#define FMTLIN3 " 0x%04x 0x%04x rc flow\n" - - seq_printf(m,"\n"); - - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - pB = i2BoardPtrTable[i]; - if ( pB ) { - seq_printf(m,"board %d:\n",i); - seq_printf(m,"\tFifo rem: %d mty: %x outM %x\n", - pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting); - } - } - - seq_printf(m,"#: tty flags, port flags, cflags, iflags\n"); - for (i=0; i < IP2_MAX_PORTS; i++) { - pCh = DevTable[i]; - if (pCh) { - tty = pCh->pTTY; - if (tty && tty->count) { - seq_printf(m,FMTLINE,i,(int)tty->flags,pCh->flags, - tty->termios->c_cflag,tty->termios->c_iflag); - - seq_printf(m,FMTLIN2, - pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds); - seq_printf(m,FMTLIN3,pCh->infl.asof,pCh->infl.room); - } - } - } - return 0; -} - -static int proc_ip2mem_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_ip2mem_show, NULL); -} - -static const struct file_operations ip2mem_proc_fops = { - .owner = THIS_MODULE, - .open = proc_ip2mem_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * This is the handler for /proc/tty/driver/ip2 - * - * This stretch of code has been largely plagerized from at least three - * different sources including ip2mkdev.c and a couple of other drivers. - * The bugs are all mine. :-) =mhw= - */ -static int ip2_proc_show(struct seq_file *m, void *v) -{ - int i, j, box; - int boxes = 0; - int ports = 0; - int tports = 0; - i2eBordStrPtr pB; - char *sep; - - seq_printf(m, "ip2info: 1.0 driver: %s\n", pcVersion); - seq_printf(m, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", - IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR, - IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX); - - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - /* This need to be reset for a board by board count... */ - boxes = 0; - pB = i2BoardPtrTable[i]; - if( pB ) { - switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) - { - case POR_ID_FIIEX: - seq_printf(m, "Board %d: EX ports=", i); - sep = ""; - for( box = 0; box < ABS_MAX_BOXES; ++box ) - { - ports = 0; - - if( pB->i2eChannelMap[box] != 0 ) ++boxes; - for( j = 0; j < ABS_BIGGEST_BOX; ++j ) - { - if( pB->i2eChannelMap[box] & 1<< j ) { - ++ports; - } - } - seq_printf(m, "%s%d", sep, ports); - sep = ","; - tports += ports; - } - seq_printf(m, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8); - break; - - case POR_ID_II_4: - seq_printf(m, "Board %d: ISA-4 ports=4 boxes=1", i); - tports = ports = 4; - break; - - case POR_ID_II_8: - seq_printf(m, "Board %d: ISA-8-std ports=8 boxes=1", i); - tports = ports = 8; - break; - - case POR_ID_II_8R: - seq_printf(m, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i); - tports = ports = 8; - break; - - default: - seq_printf(m, "Board %d: unknown", i); - /* Don't try and probe for minor numbers */ - tports = ports = 0; - } - - } else { - /* Don't try and probe for minor numbers */ - seq_printf(m, "Board %d: vacant", i); - tports = ports = 0; - } - - if( tports ) { - seq_puts(m, " minors="); - sep = ""; - for ( box = 0; box < ABS_MAX_BOXES; ++box ) - { - for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) - { - if ( pB->i2eChannelMap[box] & (1 << j) ) - { - seq_printf(m, "%s%d", sep, - j + ABS_BIGGEST_BOX * - (box+i*ABS_MAX_BOXES)); - sep = ","; - } - } - } - } - seq_putc(m, '\n'); - } - return 0; - } - -static int ip2_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, ip2_proc_show, NULL); -} - -static const struct file_operations ip2_proc_fops = { - .owner = THIS_MODULE, - .open = ip2_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/******************************************************************************/ -/* Function: ip2trace() */ -/* Parameters: Value to add to trace buffer */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -#ifdef IP2DEBUG_TRACE -void -ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...) -{ - long flags; - unsigned long *pCode = &codes; - union ip2breadcrumb bc; - i2ChanStrPtr pCh; - - - tracebuf[tracestuff++] = jiffies; - if ( tracestuff == TRACEMAX ) { - tracestuff = 0; - } - if ( tracestuff == tracestrip ) { - if ( ++tracestrip == TRACEMAX ) { - tracestrip = 0; - } - ++tracewrap; - } - - bc.hdr.port = 0xff & pn; - bc.hdr.cat = cat; - bc.hdr.codes = (unsigned char)( codes & 0xff ); - bc.hdr.label = label; - tracebuf[tracestuff++] = bc.value; - - for (;;) { - if ( tracestuff == TRACEMAX ) { - tracestuff = 0; - } - if ( tracestuff == tracestrip ) { - if ( ++tracestrip == TRACEMAX ) { - tracestrip = 0; - } - ++tracewrap; - } - - if ( !codes-- ) - break; - - tracebuf[tracestuff++] = *++pCode; - } -} -#endif - - -MODULE_LICENSE("GPL"); - -static struct pci_device_id ip2main_pci_tbl[] __devinitdata __used = { - { PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) }, - { } -}; - -MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl); - -MODULE_FIRMWARE("intelliport2.bin"); diff --git a/drivers/char/ip2/ip2trace.h b/drivers/char/ip2/ip2trace.h deleted file mode 100644 index da20435dc8a6..000000000000 --- a/drivers/char/ip2/ip2trace.h +++ /dev/null @@ -1,42 +0,0 @@ - -// -union ip2breadcrumb -{ - struct { - unsigned char port, cat, codes, label; - } __attribute__ ((packed)) hdr; - unsigned long value; -}; - -#define ITRC_NO_PORT 0xFF -#define CHANN (pCh->port_index) - -#define ITRC_ERROR '!' -#define ITRC_INIT 'A' -#define ITRC_OPEN 'B' -#define ITRC_CLOSE 'C' -#define ITRC_DRAIN 'D' -#define ITRC_IOCTL 'E' -#define ITRC_FLUSH 'F' -#define ITRC_STATUS 'G' -#define ITRC_HANGUP 'H' -#define ITRC_INTR 'I' -#define ITRC_SFLOW 'J' -#define ITRC_SBCMD 'K' -#define ITRC_SICMD 'L' -#define ITRC_MODEM 'M' -#define ITRC_INPUT 'N' -#define ITRC_OUTPUT 'O' -#define ITRC_PUTC 'P' -#define ITRC_QUEUE 'Q' -#define ITRC_STFLW 'R' -#define ITRC_SFIFO 'S' -#define ITRC_VERIFY 'V' -#define ITRC_WRITE 'W' - -#define ITRC_ENTER 0x00 -#define ITRC_RETURN 0xFF - -#define ITRC_QUEUE_ROOM 2 -#define ITRC_QUEUE_CMD 6 - diff --git a/drivers/char/ip2/ip2types.h b/drivers/char/ip2/ip2types.h deleted file mode 100644 index 9d67b260b2f6..000000000000 --- a/drivers/char/ip2/ip2types.h +++ /dev/null @@ -1,57 +0,0 @@ -/******************************************************************************* -* -* (c) 1998 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Driver constants and type definitions. -* -* NOTES: -* -*******************************************************************************/ -#ifndef IP2TYPES_H -#define IP2TYPES_H - -//************* -//* Constants * -//************* - -// Define some limits for this driver. Ports per board is a hardware limitation -// that will not change. Current hardware limits this to 64 ports per board. -// Boards per driver is a self-imposed limit. -// -#define IP2_MAX_BOARDS 4 -#define IP2_PORTS_PER_BOARD ABS_MOST_PORTS -#define IP2_MAX_PORTS (IP2_MAX_BOARDS*IP2_PORTS_PER_BOARD) - -#define ISA 0 -#define PCI 1 -#define EISA 2 - -//******************** -//* Type Definitions * -//******************** - -typedef struct tty_struct * PTTY; -typedef wait_queue_head_t PWAITQ; - -typedef unsigned char UCHAR; -typedef unsigned int UINT; -typedef unsigned short USHORT; -typedef unsigned long ULONG; - -typedef struct -{ - short irq[IP2_MAX_BOARDS]; - unsigned short addr[IP2_MAX_BOARDS]; - int type[IP2_MAX_BOARDS]; -#ifdef CONFIG_PCI - struct pci_dev *pci_dev[IP2_MAX_BOARDS]; -#endif -} ip2config_t; - -#endif diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c deleted file mode 100644 index 0b266272cccd..000000000000 --- a/drivers/char/istallion.c +++ /dev/null @@ -1,4507 +0,0 @@ -/*****************************************************************************/ - -/* - * istallion.c -- stallion intelligent multiport serial driver. - * - * Copyright (C) 1996-1999 Stallion Technologies - * Copyright (C) 1994-1996 Greg Ungerer. - * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -/*****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -/*****************************************************************************/ - -/* - * Define different board types. Not all of the following board types - * are supported by this driver. But I will use the standard "assigned" - * board numbers. Currently supported boards are abbreviated as: - * ECP = EasyConnection 8/64, ONB = ONboard, BBY = Brumby and - * STAL = Stallion. - */ -#define BRD_UNKNOWN 0 -#define BRD_STALLION 1 -#define BRD_BRUMBY4 2 -#define BRD_ONBOARD2 3 -#define BRD_ONBOARD 4 -#define BRD_ONBOARDE 7 -#define BRD_ECP 23 -#define BRD_ECPE 24 -#define BRD_ECPMC 25 -#define BRD_ECPPCI 29 - -#define BRD_BRUMBY BRD_BRUMBY4 - -/* - * Define a configuration structure to hold the board configuration. - * Need to set this up in the code (for now) with the boards that are - * to be configured into the system. This is what needs to be modified - * when adding/removing/modifying boards. Each line entry in the - * stli_brdconf[] array is a board. Each line contains io/irq/memory - * ranges for that board (as well as what type of board it is). - * Some examples: - * { BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 }, - * This line will configure an EasyConnection 8/64 at io address 2a0, - * and shared memory address of cc000. Multiple EasyConnection 8/64 - * boards can share the same shared memory address space. No interrupt - * is required for this board type. - * Another example: - * { BRD_ECPE, 0x5000, 0, 0x80000000, 0, 0 }, - * This line will configure an EasyConnection 8/64 EISA in slot 5 and - * shared memory address of 0x80000000 (2 GByte). Multiple - * EasyConnection 8/64 EISA boards can share the same shared memory - * address space. No interrupt is required for this board type. - * Another example: - * { BRD_ONBOARD, 0x240, 0, 0xd0000, 0, 0 }, - * This line will configure an ONboard (ISA type) at io address 240, - * and shared memory address of d0000. Multiple ONboards can share - * the same shared memory address space. No interrupt required. - * Another example: - * { BRD_BRUMBY4, 0x360, 0, 0xc8000, 0, 0 }, - * This line will configure a Brumby board (any number of ports!) at - * io address 360 and shared memory address of c8000. All Brumby boards - * configured into a system must have their own separate io and memory - * addresses. No interrupt is required. - * Another example: - * { BRD_STALLION, 0x330, 0, 0xd0000, 0, 0 }, - * This line will configure an original Stallion board at io address 330 - * and shared memory address d0000 (this would only be valid for a "V4.0" - * or Rev.O Stallion board). All Stallion boards configured into the - * system must have their own separate io and memory addresses. No - * interrupt is required. - */ - -struct stlconf { - int brdtype; - int ioaddr1; - int ioaddr2; - unsigned long memaddr; - int irq; - int irqtype; -}; - -static unsigned int stli_nrbrds; - -/* stli_lock must NOT be taken holding brd_lock */ -static spinlock_t stli_lock; /* TTY logic lock */ -static spinlock_t brd_lock; /* Board logic lock */ - -/* - * There is some experimental EISA board detection code in this driver. - * By default it is disabled, but for those that want to try it out, - * then set the define below to be 1. - */ -#define STLI_EISAPROBE 0 - -/*****************************************************************************/ - -/* - * Define some important driver characteristics. Device major numbers - * allocated as per Linux Device Registry. - */ -#ifndef STL_SIOMEMMAJOR -#define STL_SIOMEMMAJOR 28 -#endif -#ifndef STL_SERIALMAJOR -#define STL_SERIALMAJOR 24 -#endif -#ifndef STL_CALLOUTMAJOR -#define STL_CALLOUTMAJOR 25 -#endif - -/*****************************************************************************/ - -/* - * Define our local driver identity first. Set up stuff to deal with - * all the local structures required by a serial tty driver. - */ -static char *stli_drvtitle = "Stallion Intelligent Multiport Serial Driver"; -static char *stli_drvname = "istallion"; -static char *stli_drvversion = "5.6.0"; -static char *stli_serialname = "ttyE"; - -static struct tty_driver *stli_serial; -static const struct tty_port_operations stli_port_ops; - -#define STLI_TXBUFSIZE 4096 - -/* - * Use a fast local buffer for cooked characters. Typically a whole - * bunch of cooked characters come in for a port, 1 at a time. So we - * save those up into a local buffer, then write out the whole lot - * with a large memcpy. Just use 1 buffer for all ports, since its - * use it is only need for short periods of time by each port. - */ -static char *stli_txcookbuf; -static int stli_txcooksize; -static int stli_txcookrealsize; -static struct tty_struct *stli_txcooktty; - -/* - * Define a local default termios struct. All ports will be created - * with this termios initially. Basically all it defines is a raw port - * at 9600 baud, 8 data bits, no parity, 1 stop bit. - */ -static struct ktermios stli_deftermios = { - .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL), - .c_cc = INIT_C_CC, - .c_ispeed = 9600, - .c_ospeed = 9600, -}; - -/* - * Define global stats structures. Not used often, and can be - * re-used for each stats call. - */ -static comstats_t stli_comstats; -static combrd_t stli_brdstats; -static struct asystats stli_cdkstats; - -/*****************************************************************************/ - -static DEFINE_MUTEX(stli_brdslock); -static struct stlibrd *stli_brds[STL_MAXBRDS]; - -static int stli_shared; - -/* - * Per board state flags. Used with the state field of the board struct. - * Not really much here... All we need to do is keep track of whether - * the board has been detected, and whether it is actually running a slave - * or not. - */ -#define BST_FOUND 0 -#define BST_STARTED 1 -#define BST_PROBED 2 - -/* - * Define the set of port state flags. These are marked for internal - * state purposes only, usually to do with the state of communications - * with the slave. Most of them need to be updated atomically, so always - * use the bit setting operations (unless protected by cli/sti). - */ -#define ST_OPENING 2 -#define ST_CLOSING 3 -#define ST_CMDING 4 -#define ST_TXBUSY 5 -#define ST_RXING 6 -#define ST_DOFLUSHRX 7 -#define ST_DOFLUSHTX 8 -#define ST_DOSIGS 9 -#define ST_RXSTOP 10 -#define ST_GETSIGS 11 - -/* - * Define an array of board names as printable strings. Handy for - * referencing boards when printing trace and stuff. - */ -static char *stli_brdnames[] = { - "Unknown", - "Stallion", - "Brumby", - "ONboard-MC", - "ONboard", - "Brumby", - "Brumby", - "ONboard-EI", - NULL, - "ONboard", - "ONboard-MC", - "ONboard-MC", - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - "EasyIO", - "EC8/32-AT", - "EC8/32-MC", - "EC8/64-AT", - "EC8/64-EI", - "EC8/64-MC", - "EC8/32-PCI", - "EC8/64-PCI", - "EasyIO-PCI", - "EC/RA-PCI", -}; - -/*****************************************************************************/ - -/* - * Define some string labels for arguments passed from the module - * load line. These allow for easy board definitions, and easy - * modification of the io, memory and irq resoucres. - */ - -static char *board0[8]; -static char *board1[8]; -static char *board2[8]; -static char *board3[8]; - -static char **stli_brdsp[] = { - (char **) &board0, - (char **) &board1, - (char **) &board2, - (char **) &board3 -}; - -/* - * Define a set of common board names, and types. This is used to - * parse any module arguments. - */ - -static struct stlibrdtype { - char *name; - int type; -} stli_brdstr[] = { - { "stallion", BRD_STALLION }, - { "1", BRD_STALLION }, - { "brumby", BRD_BRUMBY }, - { "brumby4", BRD_BRUMBY }, - { "brumby/4", BRD_BRUMBY }, - { "brumby-4", BRD_BRUMBY }, - { "brumby8", BRD_BRUMBY }, - { "brumby/8", BRD_BRUMBY }, - { "brumby-8", BRD_BRUMBY }, - { "brumby16", BRD_BRUMBY }, - { "brumby/16", BRD_BRUMBY }, - { "brumby-16", BRD_BRUMBY }, - { "2", BRD_BRUMBY }, - { "onboard2", BRD_ONBOARD2 }, - { "onboard-2", BRD_ONBOARD2 }, - { "onboard/2", BRD_ONBOARD2 }, - { "onboard-mc", BRD_ONBOARD2 }, - { "onboard/mc", BRD_ONBOARD2 }, - { "onboard-mca", BRD_ONBOARD2 }, - { "onboard/mca", BRD_ONBOARD2 }, - { "3", BRD_ONBOARD2 }, - { "onboard", BRD_ONBOARD }, - { "onboardat", BRD_ONBOARD }, - { "4", BRD_ONBOARD }, - { "onboarde", BRD_ONBOARDE }, - { "onboard-e", BRD_ONBOARDE }, - { "onboard/e", BRD_ONBOARDE }, - { "onboard-ei", BRD_ONBOARDE }, - { "onboard/ei", BRD_ONBOARDE }, - { "7", BRD_ONBOARDE }, - { "ecp", BRD_ECP }, - { "ecpat", BRD_ECP }, - { "ec8/64", BRD_ECP }, - { "ec8/64-at", BRD_ECP }, - { "ec8/64-isa", BRD_ECP }, - { "23", BRD_ECP }, - { "ecpe", BRD_ECPE }, - { "ecpei", BRD_ECPE }, - { "ec8/64-e", BRD_ECPE }, - { "ec8/64-ei", BRD_ECPE }, - { "24", BRD_ECPE }, - { "ecpmc", BRD_ECPMC }, - { "ec8/64-mc", BRD_ECPMC }, - { "ec8/64-mca", BRD_ECPMC }, - { "25", BRD_ECPMC }, - { "ecppci", BRD_ECPPCI }, - { "ec/ra", BRD_ECPPCI }, - { "ec/ra-pc", BRD_ECPPCI }, - { "ec/ra-pci", BRD_ECPPCI }, - { "29", BRD_ECPPCI }, -}; - -/* - * Define the module agruments. - */ -MODULE_AUTHOR("Greg Ungerer"); -MODULE_DESCRIPTION("Stallion Intelligent Multiport Serial Driver"); -MODULE_LICENSE("GPL"); - - -module_param_array(board0, charp, NULL, 0); -MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,memaddr]"); -module_param_array(board1, charp, NULL, 0); -MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,memaddr]"); -module_param_array(board2, charp, NULL, 0); -MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]"); -module_param_array(board3, charp, NULL, 0); -MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]"); - -#if STLI_EISAPROBE != 0 -/* - * Set up a default memory address table for EISA board probing. - * The default addresses are all bellow 1Mbyte, which has to be the - * case anyway. They should be safe, since we only read values from - * them, and interrupts are disabled while we do it. If the higher - * memory support is compiled in then we also try probing around - * the 1Gb, 2Gb and 3Gb areas as well... - */ -static unsigned long stli_eisamemprobeaddrs[] = { - 0xc0000, 0xd0000, 0xe0000, 0xf0000, - 0x80000000, 0x80010000, 0x80020000, 0x80030000, - 0x40000000, 0x40010000, 0x40020000, 0x40030000, - 0xc0000000, 0xc0010000, 0xc0020000, 0xc0030000, - 0xff000000, 0xff010000, 0xff020000, 0xff030000, -}; - -static int stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs); -#endif - -/* - * Define the Stallion PCI vendor and device IDs. - */ -#ifndef PCI_DEVICE_ID_ECRA -#define PCI_DEVICE_ID_ECRA 0x0004 -#endif - -static struct pci_device_id istallion_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA), }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, istallion_pci_tbl); - -static struct pci_driver stli_pcidriver; - -/*****************************************************************************/ - -/* - * Hardware configuration info for ECP boards. These defines apply - * to the directly accessible io ports of the ECP. There is a set of - * defines for each ECP board type, ISA, EISA, MCA and PCI. - */ -#define ECP_IOSIZE 4 - -#define ECP_MEMSIZE (128 * 1024) -#define ECP_PCIMEMSIZE (256 * 1024) - -#define ECP_ATPAGESIZE (4 * 1024) -#define ECP_MCPAGESIZE (4 * 1024) -#define ECP_EIPAGESIZE (64 * 1024) -#define ECP_PCIPAGESIZE (64 * 1024) - -#define STL_EISAID 0x8c4e - -/* - * Important defines for the ISA class of ECP board. - */ -#define ECP_ATIREG 0 -#define ECP_ATCONFR 1 -#define ECP_ATMEMAR 2 -#define ECP_ATMEMPR 3 -#define ECP_ATSTOP 0x1 -#define ECP_ATINTENAB 0x10 -#define ECP_ATENABLE 0x20 -#define ECP_ATDISABLE 0x00 -#define ECP_ATADDRMASK 0x3f000 -#define ECP_ATADDRSHFT 12 - -/* - * Important defines for the EISA class of ECP board. - */ -#define ECP_EIIREG 0 -#define ECP_EIMEMARL 1 -#define ECP_EICONFR 2 -#define ECP_EIMEMARH 3 -#define ECP_EIENABLE 0x1 -#define ECP_EIDISABLE 0x0 -#define ECP_EISTOP 0x4 -#define ECP_EIEDGE 0x00 -#define ECP_EILEVEL 0x80 -#define ECP_EIADDRMASKL 0x00ff0000 -#define ECP_EIADDRSHFTL 16 -#define ECP_EIADDRMASKH 0xff000000 -#define ECP_EIADDRSHFTH 24 -#define ECP_EIBRDENAB 0xc84 - -#define ECP_EISAID 0x4 - -/* - * Important defines for the Micro-channel class of ECP board. - * (It has a lot in common with the ISA boards.) - */ -#define ECP_MCIREG 0 -#define ECP_MCCONFR 1 -#define ECP_MCSTOP 0x20 -#define ECP_MCENABLE 0x80 -#define ECP_MCDISABLE 0x00 - -/* - * Important defines for the PCI class of ECP board. - * (It has a lot in common with the other ECP boards.) - */ -#define ECP_PCIIREG 0 -#define ECP_PCICONFR 1 -#define ECP_PCISTOP 0x01 - -/* - * Hardware configuration info for ONboard and Brumby boards. These - * defines apply to the directly accessible io ports of these boards. - */ -#define ONB_IOSIZE 16 -#define ONB_MEMSIZE (64 * 1024) -#define ONB_ATPAGESIZE (64 * 1024) -#define ONB_MCPAGESIZE (64 * 1024) -#define ONB_EIMEMSIZE (128 * 1024) -#define ONB_EIPAGESIZE (64 * 1024) - -/* - * Important defines for the ISA class of ONboard board. - */ -#define ONB_ATIREG 0 -#define ONB_ATMEMAR 1 -#define ONB_ATCONFR 2 -#define ONB_ATSTOP 0x4 -#define ONB_ATENABLE 0x01 -#define ONB_ATDISABLE 0x00 -#define ONB_ATADDRMASK 0xff0000 -#define ONB_ATADDRSHFT 16 - -#define ONB_MEMENABLO 0 -#define ONB_MEMENABHI 0x02 - -/* - * Important defines for the EISA class of ONboard board. - */ -#define ONB_EIIREG 0 -#define ONB_EIMEMARL 1 -#define ONB_EICONFR 2 -#define ONB_EIMEMARH 3 -#define ONB_EIENABLE 0x1 -#define ONB_EIDISABLE 0x0 -#define ONB_EISTOP 0x4 -#define ONB_EIEDGE 0x00 -#define ONB_EILEVEL 0x80 -#define ONB_EIADDRMASKL 0x00ff0000 -#define ONB_EIADDRSHFTL 16 -#define ONB_EIADDRMASKH 0xff000000 -#define ONB_EIADDRSHFTH 24 -#define ONB_EIBRDENAB 0xc84 - -#define ONB_EISAID 0x1 - -/* - * Important defines for the Brumby boards. They are pretty simple, - * there is not much that is programmably configurable. - */ -#define BBY_IOSIZE 16 -#define BBY_MEMSIZE (64 * 1024) -#define BBY_PAGESIZE (16 * 1024) - -#define BBY_ATIREG 0 -#define BBY_ATCONFR 1 -#define BBY_ATSTOP 0x4 - -/* - * Important defines for the Stallion boards. They are pretty simple, - * there is not much that is programmably configurable. - */ -#define STAL_IOSIZE 16 -#define STAL_MEMSIZE (64 * 1024) -#define STAL_PAGESIZE (64 * 1024) - -/* - * Define the set of status register values for EasyConnection panels. - * The signature will return with the status value for each panel. From - * this we can determine what is attached to the board - before we have - * actually down loaded any code to it. - */ -#define ECH_PNLSTATUS 2 -#define ECH_PNL16PORT 0x20 -#define ECH_PNLIDMASK 0x07 -#define ECH_PNLXPID 0x40 -#define ECH_PNLINTRPEND 0x80 - -/* - * Define some macros to do things to the board. Even those these boards - * are somewhat related there is often significantly different ways of - * doing some operation on it (like enable, paging, reset, etc). So each - * board class has a set of functions which do the commonly required - * operations. The macros below basically just call these functions, - * generally checking for a NULL function - which means that the board - * needs nothing done to it to achieve this operation! - */ -#define EBRDINIT(brdp) \ - if (brdp->init != NULL) \ - (* brdp->init)(brdp) - -#define EBRDENABLE(brdp) \ - if (brdp->enable != NULL) \ - (* brdp->enable)(brdp); - -#define EBRDDISABLE(brdp) \ - if (brdp->disable != NULL) \ - (* brdp->disable)(brdp); - -#define EBRDINTR(brdp) \ - if (brdp->intr != NULL) \ - (* brdp->intr)(brdp); - -#define EBRDRESET(brdp) \ - if (brdp->reset != NULL) \ - (* brdp->reset)(brdp); - -#define EBRDGETMEMPTR(brdp,offset) \ - (* brdp->getmemptr)(brdp, offset, __LINE__) - -/* - * Define the maximal baud rate, and the default baud base for ports. - */ -#define STL_MAXBAUD 460800 -#define STL_BAUDBASE 115200 -#define STL_CLOSEDELAY (5 * HZ / 10) - -/*****************************************************************************/ - -/* - * Define macros to extract a brd or port number from a minor number. - */ -#define MINOR2BRD(min) (((min) & 0xc0) >> 6) -#define MINOR2PORT(min) ((min) & 0x3f) - -/*****************************************************************************/ - -/* - * Prototype all functions in this driver! - */ - -static int stli_parsebrd(struct stlconf *confp, char **argp); -static int stli_open(struct tty_struct *tty, struct file *filp); -static void stli_close(struct tty_struct *tty, struct file *filp); -static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count); -static int stli_putchar(struct tty_struct *tty, unsigned char ch); -static void stli_flushchars(struct tty_struct *tty); -static int stli_writeroom(struct tty_struct *tty); -static int stli_charsinbuffer(struct tty_struct *tty); -static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static void stli_settermios(struct tty_struct *tty, struct ktermios *old); -static void stli_throttle(struct tty_struct *tty); -static void stli_unthrottle(struct tty_struct *tty); -static void stli_stop(struct tty_struct *tty); -static void stli_start(struct tty_struct *tty); -static void stli_flushbuffer(struct tty_struct *tty); -static int stli_breakctl(struct tty_struct *tty, int state); -static void stli_waituntilsent(struct tty_struct *tty, int timeout); -static void stli_sendxchar(struct tty_struct *tty, char ch); -static void stli_hangup(struct tty_struct *tty); - -static int stli_brdinit(struct stlibrd *brdp); -static int stli_startbrd(struct stlibrd *brdp); -static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp); -static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp); -static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); -static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp); -static void stli_poll(unsigned long arg); -static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); -static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp); -static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); -static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); -static int stli_setport(struct tty_struct *tty); -static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); -static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); -static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); -static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp); -static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, asyport_t *pp, struct ktermios *tiosp); -static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts); -static long stli_mktiocm(unsigned long sigvalue); -static void stli_read(struct stlibrd *brdp, struct stliport *portp); -static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp); -static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp); -static int stli_getbrdstats(combrd_t __user *bp); -static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, comstats_t __user *cp); -static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp); -static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp); -static int stli_getportstruct(struct stliport __user *arg); -static int stli_getbrdstruct(struct stlibrd __user *arg); -static struct stlibrd *stli_allocbrd(void); - -static void stli_ecpinit(struct stlibrd *brdp); -static void stli_ecpenable(struct stlibrd *brdp); -static void stli_ecpdisable(struct stlibrd *brdp); -static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); -static void stli_ecpreset(struct stlibrd *brdp); -static void stli_ecpintr(struct stlibrd *brdp); -static void stli_ecpeiinit(struct stlibrd *brdp); -static void stli_ecpeienable(struct stlibrd *brdp); -static void stli_ecpeidisable(struct stlibrd *brdp); -static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line); -static void stli_ecpeireset(struct stlibrd *brdp); -static void stli_ecpmcenable(struct stlibrd *brdp); -static void stli_ecpmcdisable(struct stlibrd *brdp); -static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); -static void stli_ecpmcreset(struct stlibrd *brdp); -static void stli_ecppciinit(struct stlibrd *brdp); -static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line); -static void stli_ecppcireset(struct stlibrd *brdp); - -static void stli_onbinit(struct stlibrd *brdp); -static void stli_onbenable(struct stlibrd *brdp); -static void stli_onbdisable(struct stlibrd *brdp); -static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); -static void stli_onbreset(struct stlibrd *brdp); -static void stli_onbeinit(struct stlibrd *brdp); -static void stli_onbeenable(struct stlibrd *brdp); -static void stli_onbedisable(struct stlibrd *brdp); -static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line); -static void stli_onbereset(struct stlibrd *brdp); -static void stli_bbyinit(struct stlibrd *brdp); -static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line); -static void stli_bbyreset(struct stlibrd *brdp); -static void stli_stalinit(struct stlibrd *brdp); -static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); -static void stli_stalreset(struct stlibrd *brdp); - -static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, unsigned int portnr); - -static int stli_initecp(struct stlibrd *brdp); -static int stli_initonb(struct stlibrd *brdp); -#if STLI_EISAPROBE != 0 -static int stli_eisamemprobe(struct stlibrd *brdp); -#endif -static int stli_initports(struct stlibrd *brdp); - -/*****************************************************************************/ - -/* - * Define the driver info for a user level shared memory device. This - * device will work sort of like the /dev/kmem device - except that it - * will give access to the shared memory on the Stallion intelligent - * board. This is also a very useful debugging tool. - */ -static const struct file_operations stli_fsiomem = { - .owner = THIS_MODULE, - .read = stli_memread, - .write = stli_memwrite, - .unlocked_ioctl = stli_memioctl, - .llseek = default_llseek, -}; - -/*****************************************************************************/ - -/* - * Define a timer_list entry for our poll routine. The slave board - * is polled every so often to see if anything needs doing. This is - * much cheaper on host cpu than using interrupts. It turns out to - * not increase character latency by much either... - */ -static DEFINE_TIMER(stli_timerlist, stli_poll, 0, 0); - -static int stli_timeron; - -/* - * Define the calculation for the timeout routine. - */ -#define STLI_TIMEOUT (jiffies + 1) - -/*****************************************************************************/ - -static struct class *istallion_class; - -static void stli_cleanup_ports(struct stlibrd *brdp) -{ - struct stliport *portp; - unsigned int j; - struct tty_struct *tty; - - for (j = 0; j < STL_MAXPORTS; j++) { - portp = brdp->ports[j]; - if (portp != NULL) { - tty = tty_port_tty_get(&portp->port); - if (tty != NULL) { - tty_hangup(tty); - tty_kref_put(tty); - } - kfree(portp); - } - } -} - -/*****************************************************************************/ - -/* - * Parse the supplied argument string, into the board conf struct. - */ - -static int stli_parsebrd(struct stlconf *confp, char **argp) -{ - unsigned int i; - char *sp; - - if (argp[0] == NULL || *argp[0] == 0) - return 0; - - for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++) - *sp = tolower(*sp); - - for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) { - if (strcmp(stli_brdstr[i].name, argp[0]) == 0) - break; - } - if (i == ARRAY_SIZE(stli_brdstr)) { - printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]); - return 0; - } - - confp->brdtype = stli_brdstr[i].type; - if (argp[1] != NULL && *argp[1] != 0) - confp->ioaddr1 = simple_strtoul(argp[1], NULL, 0); - if (argp[2] != NULL && *argp[2] != 0) - confp->memaddr = simple_strtoul(argp[2], NULL, 0); - return(1); -} - -/*****************************************************************************/ - -/* - * On the first open of the device setup the port hardware, and - * initialize the per port data structure. Since initializing the port - * requires several commands to the board we will need to wait for any - * other open that is already initializing the port. - * - * Locking: protected by the port mutex. - */ - -static int stli_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct stliport *portp = container_of(port, struct stliport, port); - struct stlibrd *brdp = stli_brds[portp->brdnr]; - int rc; - - if ((rc = stli_initopen(tty, brdp, portp)) >= 0) - clear_bit(TTY_IO_ERROR, &tty->flags); - wake_up_interruptible(&portp->raw_wait); - return rc; -} - -static int stli_open(struct tty_struct *tty, struct file *filp) -{ - struct stlibrd *brdp; - struct stliport *portp; - unsigned int minordev, brdnr, portnr; - - minordev = tty->index; - brdnr = MINOR2BRD(minordev); - if (brdnr >= stli_nrbrds) - return -ENODEV; - brdp = stli_brds[brdnr]; - if (brdp == NULL) - return -ENODEV; - if (!test_bit(BST_STARTED, &brdp->state)) - return -ENODEV; - portnr = MINOR2PORT(minordev); - if (portnr > brdp->nrports) - return -ENODEV; - - portp = brdp->ports[portnr]; - if (portp == NULL) - return -ENODEV; - if (portp->devnr < 1) - return -ENODEV; - - tty->driver_data = portp; - return tty_port_open(&portp->port, tty, filp); -} - - -/*****************************************************************************/ - -static void stli_shutdown(struct tty_port *port) -{ - struct stlibrd *brdp; - unsigned long ftype; - unsigned long flags; - struct stliport *portp = container_of(port, struct stliport, port); - - if (portp->brdnr >= stli_nrbrds) - return; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return; - - /* - * May want to wait for data to drain before closing. The BUSY - * flag keeps track of whether we are still transmitting or not. - * It is updated by messages from the slave - indicating when all - * chars really have drained. - */ - - if (!test_bit(ST_CLOSING, &portp->state)) - stli_rawclose(brdp, portp, 0, 0); - - spin_lock_irqsave(&stli_lock, flags); - clear_bit(ST_TXBUSY, &portp->state); - clear_bit(ST_RXSTOP, &portp->state); - spin_unlock_irqrestore(&stli_lock, flags); - - ftype = FLUSHTX | FLUSHRX; - stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0); -} - -static void stli_close(struct tty_struct *tty, struct file *filp) -{ - struct stliport *portp = tty->driver_data; - unsigned long flags; - if (portp == NULL) - return; - spin_lock_irqsave(&stli_lock, flags); - /* Flush any internal buffering out first */ - if (tty == stli_txcooktty) - stli_flushchars(tty); - spin_unlock_irqrestore(&stli_lock, flags); - tty_port_close(&portp->port, tty, filp); -} - -/*****************************************************************************/ - -/* - * Carry out first open operations on a port. This involves a number of - * commands to be sent to the slave. We need to open the port, set the - * notification events, set the initial port settings, get and set the - * initial signal values. We sleep and wait in between each one. But - * this still all happens pretty quickly. - */ - -static int stli_initopen(struct tty_struct *tty, - struct stlibrd *brdp, struct stliport *portp) -{ - asynotify_t nt; - asyport_t aport; - int rc; - - if ((rc = stli_rawopen(brdp, portp, 0, 1)) < 0) - return rc; - - memset(&nt, 0, sizeof(asynotify_t)); - nt.data = (DT_TXLOW | DT_TXEMPTY | DT_RXBUSY | DT_RXBREAK); - nt.signal = SG_DCD; - if ((rc = stli_cmdwait(brdp, portp, A_SETNOTIFY, &nt, - sizeof(asynotify_t), 0)) < 0) - return rc; - - stli_mkasyport(tty, portp, &aport, tty->termios); - if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport, - sizeof(asyport_t), 0)) < 0) - return rc; - - set_bit(ST_GETSIGS, &portp->state); - if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, &portp->asig, - sizeof(asysigs_t), 1)) < 0) - return rc; - if (test_and_clear_bit(ST_GETSIGS, &portp->state)) - portp->sigs = stli_mktiocm(portp->asig.sigvalue); - stli_mkasysigs(&portp->asig, 1, 1); - if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, - sizeof(asysigs_t), 0)) < 0) - return rc; - - return 0; -} - -/*****************************************************************************/ - -/* - * Send an open message to the slave. This will sleep waiting for the - * acknowledgement, so must have user context. We need to co-ordinate - * with close events here, since we don't want open and close events - * to overlap. - */ - -static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait) -{ - cdkhdr_t __iomem *hdrp; - cdkctrl_t __iomem *cp; - unsigned char __iomem *bits; - unsigned long flags; - int rc; - -/* - * Send a message to the slave to open this port. - */ - -/* - * Slave is already closing this port. This can happen if a hangup - * occurs on this port. So we must wait until it is complete. The - * order of opens and closes may not be preserved across shared - * memory, so we must wait until it is complete. - */ - wait_event_interruptible_tty(portp->raw_wait, - !test_bit(ST_CLOSING, &portp->state)); - if (signal_pending(current)) { - return -ERESTARTSYS; - } - -/* - * Everything is ready now, so write the open message into shared - * memory. Once the message is in set the service bits to say that - * this port wants service. - */ - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; - writel(arg, &cp->openarg); - writeb(1, &cp->open); - hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); - bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + - portp->portidx; - writeb(readb(bits) | portp->portbit, bits); - EBRDDISABLE(brdp); - - if (wait == 0) { - spin_unlock_irqrestore(&brd_lock, flags); - return 0; - } - -/* - * Slave is in action, so now we must wait for the open acknowledgment - * to come back. - */ - rc = 0; - set_bit(ST_OPENING, &portp->state); - spin_unlock_irqrestore(&brd_lock, flags); - - wait_event_interruptible_tty(portp->raw_wait, - !test_bit(ST_OPENING, &portp->state)); - if (signal_pending(current)) - rc = -ERESTARTSYS; - - if ((rc == 0) && (portp->rc != 0)) - rc = -EIO; - return rc; -} - -/*****************************************************************************/ - -/* - * Send a close message to the slave. Normally this will sleep waiting - * for the acknowledgement, but if wait parameter is 0 it will not. If - * wait is true then must have user context (to sleep). - */ - -static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait) -{ - cdkhdr_t __iomem *hdrp; - cdkctrl_t __iomem *cp; - unsigned char __iomem *bits; - unsigned long flags; - int rc; - -/* - * Slave is already closing this port. This can happen if a hangup - * occurs on this port. - */ - if (wait) { - wait_event_interruptible_tty(portp->raw_wait, - !test_bit(ST_CLOSING, &portp->state)); - if (signal_pending(current)) { - return -ERESTARTSYS; - } - } - -/* - * Write the close command into shared memory. - */ - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; - writel(arg, &cp->closearg); - writeb(1, &cp->close); - hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); - bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + - portp->portidx; - writeb(readb(bits) |portp->portbit, bits); - EBRDDISABLE(brdp); - - set_bit(ST_CLOSING, &portp->state); - spin_unlock_irqrestore(&brd_lock, flags); - - if (wait == 0) - return 0; - -/* - * Slave is in action, so now we must wait for the open acknowledgment - * to come back. - */ - rc = 0; - wait_event_interruptible_tty(portp->raw_wait, - !test_bit(ST_CLOSING, &portp->state)); - if (signal_pending(current)) - rc = -ERESTARTSYS; - - if ((rc == 0) && (portp->rc != 0)) - rc = -EIO; - return rc; -} - -/*****************************************************************************/ - -/* - * Send a command to the slave and wait for the response. This must - * have user context (it sleeps). This routine is generic in that it - * can send any type of command. Its purpose is to wait for that command - * to complete (as opposed to initiating the command then returning). - */ - -static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) -{ - /* - * no need for wait_event_tty because clearing ST_CMDING cannot block - * on BTM - */ - wait_event_interruptible(portp->raw_wait, - !test_bit(ST_CMDING, &portp->state)); - if (signal_pending(current)) - return -ERESTARTSYS; - - stli_sendcmd(brdp, portp, cmd, arg, size, copyback); - - wait_event_interruptible(portp->raw_wait, - !test_bit(ST_CMDING, &portp->state)); - if (signal_pending(current)) - return -ERESTARTSYS; - - if (portp->rc != 0) - return -EIO; - return 0; -} - -/*****************************************************************************/ - -/* - * Send the termios settings for this port to the slave. This sleeps - * waiting for the command to complete - so must have user context. - */ - -static int stli_setport(struct tty_struct *tty) -{ - struct stliport *portp = tty->driver_data; - struct stlibrd *brdp; - asyport_t aport; - - if (portp == NULL) - return -ENODEV; - if (portp->brdnr >= stli_nrbrds) - return -ENODEV; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return -ENODEV; - - stli_mkasyport(tty, portp, &aport, tty->termios); - return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0)); -} - -/*****************************************************************************/ - -static int stli_carrier_raised(struct tty_port *port) -{ - struct stliport *portp = container_of(port, struct stliport, port); - return (portp->sigs & TIOCM_CD) ? 1 : 0; -} - -static void stli_dtr_rts(struct tty_port *port, int on) -{ - struct stliport *portp = container_of(port, struct stliport, port); - struct stlibrd *brdp = stli_brds[portp->brdnr]; - stli_mkasysigs(&portp->asig, on, on); - if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, - sizeof(asysigs_t), 0) < 0) - printk(KERN_WARNING "istallion: dtr set failed.\n"); -} - - -/*****************************************************************************/ - -/* - * Write routine. Take the data and put it in the shared memory ring - * queue. If port is not already sending chars then need to mark the - * service bits for this port. - */ - -static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - cdkasy_t __iomem *ap; - cdkhdr_t __iomem *hdrp; - unsigned char __iomem *bits; - unsigned char __iomem *shbuf; - unsigned char *chbuf; - struct stliport *portp; - struct stlibrd *brdp; - unsigned int len, stlen, head, tail, size; - unsigned long flags; - - if (tty == stli_txcooktty) - stli_flushchars(tty); - portp = tty->driver_data; - if (portp == NULL) - return 0; - if (portp->brdnr >= stli_nrbrds) - return 0; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return 0; - chbuf = (unsigned char *) buf; - -/* - * All data is now local, shove as much as possible into shared memory. - */ - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); - head = (unsigned int) readw(&ap->txq.head); - tail = (unsigned int) readw(&ap->txq.tail); - if (tail != ((unsigned int) readw(&ap->txq.tail))) - tail = (unsigned int) readw(&ap->txq.tail); - size = portp->txsize; - if (head >= tail) { - len = size - (head - tail) - 1; - stlen = size - head; - } else { - len = tail - head - 1; - stlen = len; - } - - len = min(len, (unsigned int)count); - count = 0; - shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->txoffset); - - while (len > 0) { - stlen = min(len, stlen); - memcpy_toio(shbuf + head, chbuf, stlen); - chbuf += stlen; - len -= stlen; - count += stlen; - head += stlen; - if (head >= size) { - head = 0; - stlen = tail; - } - } - - ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); - writew(head, &ap->txq.head); - if (test_bit(ST_TXBUSY, &portp->state)) { - if (readl(&ap->changed.data) & DT_TXEMPTY) - writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data); - } - hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); - bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + - portp->portidx; - writeb(readb(bits) | portp->portbit, bits); - set_bit(ST_TXBUSY, &portp->state); - EBRDDISABLE(brdp); - spin_unlock_irqrestore(&brd_lock, flags); - - return(count); -} - -/*****************************************************************************/ - -/* - * Output a single character. We put it into a temporary local buffer - * (for speed) then write out that buffer when the flushchars routine - * is called. There is a safety catch here so that if some other port - * writes chars before the current buffer has been, then we write them - * first them do the new ports. - */ - -static int stli_putchar(struct tty_struct *tty, unsigned char ch) -{ - if (tty != stli_txcooktty) { - if (stli_txcooktty != NULL) - stli_flushchars(stli_txcooktty); - stli_txcooktty = tty; - } - - stli_txcookbuf[stli_txcooksize++] = ch; - return 0; -} - -/*****************************************************************************/ - -/* - * Transfer characters from the local TX cooking buffer to the board. - * We sort of ignore the tty that gets passed in here. We rely on the - * info stored with the TX cook buffer to tell us which port to flush - * the data on. In any case we clean out the TX cook buffer, for re-use - * by someone else. - */ - -static void stli_flushchars(struct tty_struct *tty) -{ - cdkhdr_t __iomem *hdrp; - unsigned char __iomem *bits; - cdkasy_t __iomem *ap; - struct tty_struct *cooktty; - struct stliport *portp; - struct stlibrd *brdp; - unsigned int len, stlen, head, tail, size, count, cooksize; - unsigned char *buf; - unsigned char __iomem *shbuf; - unsigned long flags; - - cooksize = stli_txcooksize; - cooktty = stli_txcooktty; - stli_txcooksize = 0; - stli_txcookrealsize = 0; - stli_txcooktty = NULL; - - if (cooktty == NULL) - return; - if (tty != cooktty) - tty = cooktty; - if (cooksize == 0) - return; - - portp = tty->driver_data; - if (portp == NULL) - return; - if (portp->brdnr >= stli_nrbrds) - return; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return; - - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - - ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); - head = (unsigned int) readw(&ap->txq.head); - tail = (unsigned int) readw(&ap->txq.tail); - if (tail != ((unsigned int) readw(&ap->txq.tail))) - tail = (unsigned int) readw(&ap->txq.tail); - size = portp->txsize; - if (head >= tail) { - len = size - (head - tail) - 1; - stlen = size - head; - } else { - len = tail - head - 1; - stlen = len; - } - - len = min(len, cooksize); - count = 0; - shbuf = EBRDGETMEMPTR(brdp, portp->txoffset); - buf = stli_txcookbuf; - - while (len > 0) { - stlen = min(len, stlen); - memcpy_toio(shbuf + head, buf, stlen); - buf += stlen; - len -= stlen; - count += stlen; - head += stlen; - if (head >= size) { - head = 0; - stlen = tail; - } - } - - ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); - writew(head, &ap->txq.head); - - if (test_bit(ST_TXBUSY, &portp->state)) { - if (readl(&ap->changed.data) & DT_TXEMPTY) - writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data); - } - hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); - bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + - portp->portidx; - writeb(readb(bits) | portp->portbit, bits); - set_bit(ST_TXBUSY, &portp->state); - - EBRDDISABLE(brdp); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -static int stli_writeroom(struct tty_struct *tty) -{ - cdkasyrq_t __iomem *rp; - struct stliport *portp; - struct stlibrd *brdp; - unsigned int head, tail, len; - unsigned long flags; - - if (tty == stli_txcooktty) { - if (stli_txcookrealsize != 0) { - len = stli_txcookrealsize - stli_txcooksize; - return len; - } - } - - portp = tty->driver_data; - if (portp == NULL) - return 0; - if (portp->brdnr >= stli_nrbrds) - return 0; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return 0; - - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq; - head = (unsigned int) readw(&rp->head); - tail = (unsigned int) readw(&rp->tail); - if (tail != ((unsigned int) readw(&rp->tail))) - tail = (unsigned int) readw(&rp->tail); - len = (head >= tail) ? (portp->txsize - (head - tail)) : (tail - head); - len--; - EBRDDISABLE(brdp); - spin_unlock_irqrestore(&brd_lock, flags); - - if (tty == stli_txcooktty) { - stli_txcookrealsize = len; - len -= stli_txcooksize; - } - return len; -} - -/*****************************************************************************/ - -/* - * Return the number of characters in the transmit buffer. Normally we - * will return the number of chars in the shared memory ring queue. - * We need to kludge around the case where the shared memory buffer is - * empty but not all characters have drained yet, for this case just - * return that there is 1 character in the buffer! - */ - -static int stli_charsinbuffer(struct tty_struct *tty) -{ - cdkasyrq_t __iomem *rp; - struct stliport *portp; - struct stlibrd *brdp; - unsigned int head, tail, len; - unsigned long flags; - - if (tty == stli_txcooktty) - stli_flushchars(tty); - portp = tty->driver_data; - if (portp == NULL) - return 0; - if (portp->brdnr >= stli_nrbrds) - return 0; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return 0; - - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq; - head = (unsigned int) readw(&rp->head); - tail = (unsigned int) readw(&rp->tail); - if (tail != ((unsigned int) readw(&rp->tail))) - tail = (unsigned int) readw(&rp->tail); - len = (head >= tail) ? (head - tail) : (portp->txsize - (tail - head)); - if ((len == 0) && test_bit(ST_TXBUSY, &portp->state)) - len = 1; - EBRDDISABLE(brdp); - spin_unlock_irqrestore(&brd_lock, flags); - - return len; -} - -/*****************************************************************************/ - -/* - * Generate the serial struct info. - */ - -static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp) -{ - struct serial_struct sio; - struct stlibrd *brdp; - - memset(&sio, 0, sizeof(struct serial_struct)); - sio.type = PORT_UNKNOWN; - sio.line = portp->portnr; - sio.irq = 0; - sio.flags = portp->port.flags; - sio.baud_base = portp->baud_base; - sio.close_delay = portp->port.close_delay; - sio.closing_wait = portp->closing_wait; - sio.custom_divisor = portp->custom_divisor; - sio.xmit_fifo_size = 0; - sio.hub6 = 0; - - brdp = stli_brds[portp->brdnr]; - if (brdp != NULL) - sio.port = brdp->iobase; - - return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? - -EFAULT : 0; -} - -/*****************************************************************************/ - -/* - * Set port according to the serial struct info. - * At this point we do not do any auto-configure stuff, so we will - * just quietly ignore any requests to change irq, etc. - */ - -static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp) -{ - struct serial_struct sio; - int rc; - struct stliport *portp = tty->driver_data; - - if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) - return -EFAULT; - if (!capable(CAP_SYS_ADMIN)) { - if ((sio.baud_base != portp->baud_base) || - (sio.close_delay != portp->port.close_delay) || - ((sio.flags & ~ASYNC_USR_MASK) != - (portp->port.flags & ~ASYNC_USR_MASK))) - return -EPERM; - } - - portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | - (sio.flags & ASYNC_USR_MASK); - portp->baud_base = sio.baud_base; - portp->port.close_delay = sio.close_delay; - portp->closing_wait = sio.closing_wait; - portp->custom_divisor = sio.custom_divisor; - - if ((rc = stli_setport(tty)) < 0) - return rc; - return 0; -} - -/*****************************************************************************/ - -static int stli_tiocmget(struct tty_struct *tty) -{ - struct stliport *portp = tty->driver_data; - struct stlibrd *brdp; - int rc; - - if (portp == NULL) - return -ENODEV; - if (portp->brdnr >= stli_nrbrds) - return 0; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return 0; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, - &portp->asig, sizeof(asysigs_t), 1)) < 0) - return rc; - - return stli_mktiocm(portp->asig.sigvalue); -} - -static int stli_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct stliport *portp = tty->driver_data; - struct stlibrd *brdp; - int rts = -1, dtr = -1; - - if (portp == NULL) - return -ENODEV; - if (portp->brdnr >= stli_nrbrds) - return 0; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return 0; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - if (set & TIOCM_RTS) - rts = 1; - if (set & TIOCM_DTR) - dtr = 1; - if (clear & TIOCM_RTS) - rts = 0; - if (clear & TIOCM_DTR) - dtr = 0; - - stli_mkasysigs(&portp->asig, dtr, rts); - - return stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, - sizeof(asysigs_t), 0); -} - -static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) -{ - struct stliport *portp; - struct stlibrd *brdp; - int rc; - void __user *argp = (void __user *)arg; - - portp = tty->driver_data; - if (portp == NULL) - return -ENODEV; - if (portp->brdnr >= stli_nrbrds) - return 0; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return 0; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - rc = 0; - - switch (cmd) { - case TIOCGSERIAL: - rc = stli_getserial(portp, argp); - break; - case TIOCSSERIAL: - rc = stli_setserial(tty, argp); - break; - case STL_GETPFLAG: - rc = put_user(portp->pflag, (unsigned __user *)argp); - break; - case STL_SETPFLAG: - if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0) - stli_setport(tty); - break; - case COM_GETPORTSTATS: - rc = stli_getportstats(tty, portp, argp); - break; - case COM_CLRPORTSTATS: - rc = stli_clrportstats(portp, argp); - break; - case TIOCSERCONFIG: - case TIOCSERGWILD: - case TIOCSERSWILD: - case TIOCSERGETLSR: - case TIOCSERGSTRUCT: - case TIOCSERGETMULTI: - case TIOCSERSETMULTI: - default: - rc = -ENOIOCTLCMD; - break; - } - - return rc; -} - -/*****************************************************************************/ - -/* - * This routine assumes that we have user context and can sleep. - * Looks like it is true for the current ttys implementation..!! - */ - -static void stli_settermios(struct tty_struct *tty, struct ktermios *old) -{ - struct stliport *portp; - struct stlibrd *brdp; - struct ktermios *tiosp; - asyport_t aport; - - portp = tty->driver_data; - if (portp == NULL) - return; - if (portp->brdnr >= stli_nrbrds) - return; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return; - - tiosp = tty->termios; - - stli_mkasyport(tty, portp, &aport, tiosp); - stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0); - stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1); - stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, - sizeof(asysigs_t), 0); - if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) - tty->hw_stopped = 0; - if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL)) - wake_up_interruptible(&portp->port.open_wait); -} - -/*****************************************************************************/ - -/* - * Attempt to flow control who ever is sending us data. We won't really - * do any flow control action here. We can't directly, and even if we - * wanted to we would have to send a command to the slave. The slave - * knows how to flow control, and will do so when its buffers reach its - * internal high water marks. So what we will do is set a local state - * bit that will stop us sending any RX data up from the poll routine - * (which is the place where RX data from the slave is handled). - */ - -static void stli_throttle(struct tty_struct *tty) -{ - struct stliport *portp = tty->driver_data; - if (portp == NULL) - return; - set_bit(ST_RXSTOP, &portp->state); -} - -/*****************************************************************************/ - -/* - * Unflow control the device sending us data... That means that all - * we have to do is clear the RXSTOP state bit. The next poll call - * will then be able to pass the RX data back up. - */ - -static void stli_unthrottle(struct tty_struct *tty) -{ - struct stliport *portp = tty->driver_data; - if (portp == NULL) - return; - clear_bit(ST_RXSTOP, &portp->state); -} - -/*****************************************************************************/ - -/* - * Stop the transmitter. - */ - -static void stli_stop(struct tty_struct *tty) -{ -} - -/*****************************************************************************/ - -/* - * Start the transmitter again. - */ - -static void stli_start(struct tty_struct *tty) -{ -} - -/*****************************************************************************/ - - -/* - * Hangup this port. This is pretty much like closing the port, only - * a little more brutal. No waiting for data to drain. Shutdown the - * port and maybe drop signals. This is rather tricky really. We want - * to close the port as well. - */ - -static void stli_hangup(struct tty_struct *tty) -{ - struct stliport *portp = tty->driver_data; - tty_port_hangup(&portp->port); -} - -/*****************************************************************************/ - -/* - * Flush characters from the lower buffer. We may not have user context - * so we cannot sleep waiting for it to complete. Also we need to check - * if there is chars for this port in the TX cook buffer, and flush them - * as well. - */ - -static void stli_flushbuffer(struct tty_struct *tty) -{ - struct stliport *portp; - struct stlibrd *brdp; - unsigned long ftype, flags; - - portp = tty->driver_data; - if (portp == NULL) - return; - if (portp->brdnr >= stli_nrbrds) - return; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return; - - spin_lock_irqsave(&brd_lock, flags); - if (tty == stli_txcooktty) { - stli_txcooktty = NULL; - stli_txcooksize = 0; - stli_txcookrealsize = 0; - } - if (test_bit(ST_CMDING, &portp->state)) { - set_bit(ST_DOFLUSHTX, &portp->state); - } else { - ftype = FLUSHTX; - if (test_bit(ST_DOFLUSHRX, &portp->state)) { - ftype |= FLUSHRX; - clear_bit(ST_DOFLUSHRX, &portp->state); - } - __stli_sendcmd(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0); - } - spin_unlock_irqrestore(&brd_lock, flags); - tty_wakeup(tty); -} - -/*****************************************************************************/ - -static int stli_breakctl(struct tty_struct *tty, int state) -{ - struct stlibrd *brdp; - struct stliport *portp; - long arg; - - portp = tty->driver_data; - if (portp == NULL) - return -EINVAL; - if (portp->brdnr >= stli_nrbrds) - return -EINVAL; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return -EINVAL; - - arg = (state == -1) ? BREAKON : BREAKOFF; - stli_cmdwait(brdp, portp, A_BREAK, &arg, sizeof(long), 0); - return 0; -} - -/*****************************************************************************/ - -static void stli_waituntilsent(struct tty_struct *tty, int timeout) -{ - struct stliport *portp; - unsigned long tend; - - portp = tty->driver_data; - if (portp == NULL) - return; - - if (timeout == 0) - timeout = HZ; - tend = jiffies + timeout; - - while (test_bit(ST_TXBUSY, &portp->state)) { - if (signal_pending(current)) - break; - msleep_interruptible(20); - if (time_after_eq(jiffies, tend)) - break; - } -} - -/*****************************************************************************/ - -static void stli_sendxchar(struct tty_struct *tty, char ch) -{ - struct stlibrd *brdp; - struct stliport *portp; - asyctrl_t actrl; - - portp = tty->driver_data; - if (portp == NULL) - return; - if (portp->brdnr >= stli_nrbrds) - return; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return; - - memset(&actrl, 0, sizeof(asyctrl_t)); - if (ch == STOP_CHAR(tty)) { - actrl.rxctrl = CT_STOPFLOW; - } else if (ch == START_CHAR(tty)) { - actrl.rxctrl = CT_STARTFLOW; - } else { - actrl.txctrl = CT_SENDCHR; - actrl.tximdch = ch; - } - stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0); -} - -static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stliport *portp, int portnr) -{ - char *uart; - int rc; - - rc = stli_portcmdstats(NULL, portp); - - uart = "UNKNOWN"; - if (test_bit(BST_STARTED, &brdp->state)) { - switch (stli_comstats.hwid) { - case 0: uart = "2681"; break; - case 1: uart = "SC26198"; break; - default:uart = "CD1400"; break; - } - } - seq_printf(m, "%d: uart:%s ", portnr, uart); - - if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) { - char sep; - - seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal, - (int) stli_comstats.rxtotal); - - if (stli_comstats.rxframing) - seq_printf(m, " fe:%d", - (int) stli_comstats.rxframing); - if (stli_comstats.rxparity) - seq_printf(m, " pe:%d", - (int) stli_comstats.rxparity); - if (stli_comstats.rxbreaks) - seq_printf(m, " brk:%d", - (int) stli_comstats.rxbreaks); - if (stli_comstats.rxoverrun) - seq_printf(m, " oe:%d", - (int) stli_comstats.rxoverrun); - - sep = ' '; - if (stli_comstats.signals & TIOCM_RTS) { - seq_printf(m, "%c%s", sep, "RTS"); - sep = '|'; - } - if (stli_comstats.signals & TIOCM_CTS) { - seq_printf(m, "%c%s", sep, "CTS"); - sep = '|'; - } - if (stli_comstats.signals & TIOCM_DTR) { - seq_printf(m, "%c%s", sep, "DTR"); - sep = '|'; - } - if (stli_comstats.signals & TIOCM_CD) { - seq_printf(m, "%c%s", sep, "DCD"); - sep = '|'; - } - if (stli_comstats.signals & TIOCM_DSR) { - seq_printf(m, "%c%s", sep, "DSR"); - sep = '|'; - } - } - seq_putc(m, '\n'); -} - -/*****************************************************************************/ - -/* - * Port info, read from the /proc file system. - */ - -static int stli_proc_show(struct seq_file *m, void *v) -{ - struct stlibrd *brdp; - struct stliport *portp; - unsigned int brdnr, portnr, totalport; - - totalport = 0; - - seq_printf(m, "%s: version %s\n", stli_drvtitle, stli_drvversion); - -/* - * We scan through for each board, panel and port. The offset is - * calculated on the fly, and irrelevant ports are skipped. - */ - for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) { - brdp = stli_brds[brdnr]; - if (brdp == NULL) - continue; - if (brdp->state == 0) - continue; - - totalport = brdnr * STL_MAXPORTS; - for (portnr = 0; (portnr < brdp->nrports); portnr++, - totalport++) { - portp = brdp->ports[portnr]; - if (portp == NULL) - continue; - stli_portinfo(m, brdp, portp, totalport); - } - } - return 0; -} - -static int stli_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, stli_proc_show, NULL); -} - -static const struct file_operations stli_proc_fops = { - .owner = THIS_MODULE, - .open = stli_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/*****************************************************************************/ - -/* - * Generic send command routine. This will send a message to the slave, - * of the specified type with the specified argument. Must be very - * careful of data that will be copied out from shared memory - - * containing command results. The command completion is all done from - * a poll routine that does not have user context. Therefore you cannot - * copy back directly into user space, or to the kernel stack of a - * process. This routine does not sleep, so can be called from anywhere. - * - * The caller must hold the brd_lock (see also stli_sendcmd the usual - * entry point) - */ - -static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) -{ - cdkhdr_t __iomem *hdrp; - cdkctrl_t __iomem *cp; - unsigned char __iomem *bits; - - if (test_bit(ST_CMDING, &portp->state)) { - printk(KERN_ERR "istallion: command already busy, cmd=%x!\n", - (int) cmd); - return; - } - - EBRDENABLE(brdp); - cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; - if (size > 0) { - memcpy_toio((void __iomem *) &(cp->args[0]), arg, size); - if (copyback) { - portp->argp = arg; - portp->argsize = size; - } - } - writel(0, &cp->status); - writel(cmd, &cp->cmd); - hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); - bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + - portp->portidx; - writeb(readb(bits) | portp->portbit, bits); - set_bit(ST_CMDING, &portp->state); - EBRDDISABLE(brdp); -} - -static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) -{ - unsigned long flags; - - spin_lock_irqsave(&brd_lock, flags); - __stli_sendcmd(brdp, portp, cmd, arg, size, copyback); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Read data from shared memory. This assumes that the shared memory - * is enabled and that interrupts are off. Basically we just empty out - * the shared memory buffer into the tty buffer. Must be careful to - * handle the case where we fill up the tty buffer, but still have - * more chars to unload. - */ - -static void stli_read(struct stlibrd *brdp, struct stliport *portp) -{ - cdkasyrq_t __iomem *rp; - char __iomem *shbuf; - struct tty_struct *tty; - unsigned int head, tail, size; - unsigned int len, stlen; - - if (test_bit(ST_RXSTOP, &portp->state)) - return; - tty = tty_port_tty_get(&portp->port); - if (tty == NULL) - return; - - rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq; - head = (unsigned int) readw(&rp->head); - if (head != ((unsigned int) readw(&rp->head))) - head = (unsigned int) readw(&rp->head); - tail = (unsigned int) readw(&rp->tail); - size = portp->rxsize; - if (head >= tail) { - len = head - tail; - stlen = len; - } else { - len = size - (tail - head); - stlen = size - tail; - } - - len = tty_buffer_request_room(tty, len); - - shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->rxoffset); - - while (len > 0) { - unsigned char *cptr; - - stlen = min(len, stlen); - tty_prepare_flip_string(tty, &cptr, stlen); - memcpy_fromio(cptr, shbuf + tail, stlen); - len -= stlen; - tail += stlen; - if (tail >= size) { - tail = 0; - stlen = head; - } - } - rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq; - writew(tail, &rp->tail); - - if (head != tail) - set_bit(ST_RXING, &portp->state); - - tty_schedule_flip(tty); - tty_kref_put(tty); -} - -/*****************************************************************************/ - -/* - * Set up and carry out any delayed commands. There is only a small set - * of slave commands that can be done "off-level". So it is not too - * difficult to deal with them here. - */ - -static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp) -{ - int cmd; - - if (test_bit(ST_DOSIGS, &portp->state)) { - if (test_bit(ST_DOFLUSHTX, &portp->state) && - test_bit(ST_DOFLUSHRX, &portp->state)) - cmd = A_SETSIGNALSF; - else if (test_bit(ST_DOFLUSHTX, &portp->state)) - cmd = A_SETSIGNALSFTX; - else if (test_bit(ST_DOFLUSHRX, &portp->state)) - cmd = A_SETSIGNALSFRX; - else - cmd = A_SETSIGNALS; - clear_bit(ST_DOFLUSHTX, &portp->state); - clear_bit(ST_DOFLUSHRX, &portp->state); - clear_bit(ST_DOSIGS, &portp->state); - memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &portp->asig, - sizeof(asysigs_t)); - writel(0, &cp->status); - writel(cmd, &cp->cmd); - set_bit(ST_CMDING, &portp->state); - } else if (test_bit(ST_DOFLUSHTX, &portp->state) || - test_bit(ST_DOFLUSHRX, &portp->state)) { - cmd = ((test_bit(ST_DOFLUSHTX, &portp->state)) ? FLUSHTX : 0); - cmd |= ((test_bit(ST_DOFLUSHRX, &portp->state)) ? FLUSHRX : 0); - clear_bit(ST_DOFLUSHTX, &portp->state); - clear_bit(ST_DOFLUSHRX, &portp->state); - memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &cmd, sizeof(int)); - writel(0, &cp->status); - writel(A_FLUSH, &cp->cmd); - set_bit(ST_CMDING, &portp->state); - } -} - -/*****************************************************************************/ - -/* - * Host command service checking. This handles commands or messages - * coming from the slave to the host. Must have board shared memory - * enabled and interrupts off when called. Notice that by servicing the - * read data last we don't need to change the shared memory pointer - * during processing (which is a slow IO operation). - * Return value indicates if this port is still awaiting actions from - * the slave (like open, command, or even TX data being sent). If 0 - * then port is still busy, otherwise no longer busy. - */ - -static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp) -{ - cdkasy_t __iomem *ap; - cdkctrl_t __iomem *cp; - struct tty_struct *tty; - asynotify_t nt; - unsigned long oldsigs; - int rc, donerx; - - ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); - cp = &ap->ctrl; - -/* - * Check if we are waiting for an open completion message. - */ - if (test_bit(ST_OPENING, &portp->state)) { - rc = readl(&cp->openarg); - if (readb(&cp->open) == 0 && rc != 0) { - if (rc > 0) - rc--; - writel(0, &cp->openarg); - portp->rc = rc; - clear_bit(ST_OPENING, &portp->state); - wake_up_interruptible(&portp->raw_wait); - } - } - -/* - * Check if we are waiting for a close completion message. - */ - if (test_bit(ST_CLOSING, &portp->state)) { - rc = (int) readl(&cp->closearg); - if (readb(&cp->close) == 0 && rc != 0) { - if (rc > 0) - rc--; - writel(0, &cp->closearg); - portp->rc = rc; - clear_bit(ST_CLOSING, &portp->state); - wake_up_interruptible(&portp->raw_wait); - } - } - -/* - * Check if we are waiting for a command completion message. We may - * need to copy out the command results associated with this command. - */ - if (test_bit(ST_CMDING, &portp->state)) { - rc = readl(&cp->status); - if (readl(&cp->cmd) == 0 && rc != 0) { - if (rc > 0) - rc--; - if (portp->argp != NULL) { - memcpy_fromio(portp->argp, (void __iomem *) &(cp->args[0]), - portp->argsize); - portp->argp = NULL; - } - writel(0, &cp->status); - portp->rc = rc; - clear_bit(ST_CMDING, &portp->state); - stli_dodelaycmd(portp, cp); - wake_up_interruptible(&portp->raw_wait); - } - } - -/* - * Check for any notification messages ready. This includes lots of - * different types of events - RX chars ready, RX break received, - * TX data low or empty in the slave, modem signals changed state. - */ - donerx = 0; - - if (ap->notify) { - nt = ap->changed; - ap->notify = 0; - tty = tty_port_tty_get(&portp->port); - - if (nt.signal & SG_DCD) { - oldsigs = portp->sigs; - portp->sigs = stli_mktiocm(nt.sigvalue); - clear_bit(ST_GETSIGS, &portp->state); - if ((portp->sigs & TIOCM_CD) && - ((oldsigs & TIOCM_CD) == 0)) - wake_up_interruptible(&portp->port.open_wait); - if ((oldsigs & TIOCM_CD) && - ((portp->sigs & TIOCM_CD) == 0)) { - if (portp->port.flags & ASYNC_CHECK_CD) { - if (tty) - tty_hangup(tty); - } - } - } - - if (nt.data & DT_TXEMPTY) - clear_bit(ST_TXBUSY, &portp->state); - if (nt.data & (DT_TXEMPTY | DT_TXLOW)) { - if (tty != NULL) { - tty_wakeup(tty); - EBRDENABLE(brdp); - } - } - - if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) { - if (tty != NULL) { - tty_insert_flip_char(tty, 0, TTY_BREAK); - if (portp->port.flags & ASYNC_SAK) { - do_SAK(tty); - EBRDENABLE(brdp); - } - tty_schedule_flip(tty); - } - } - tty_kref_put(tty); - - if (nt.data & DT_RXBUSY) { - donerx++; - stli_read(brdp, portp); - } - } - -/* - * It might seem odd that we are checking for more RX chars here. - * But, we need to handle the case where the tty buffer was previously - * filled, but we had more characters to pass up. The slave will not - * send any more RX notify messages until the RX buffer has been emptied. - * But it will leave the service bits on (since the buffer is not empty). - * So from here we can try to process more RX chars. - */ - if ((!donerx) && test_bit(ST_RXING, &portp->state)) { - clear_bit(ST_RXING, &portp->state); - stli_read(brdp, portp); - } - - return((test_bit(ST_OPENING, &portp->state) || - test_bit(ST_CLOSING, &portp->state) || - test_bit(ST_CMDING, &portp->state) || - test_bit(ST_TXBUSY, &portp->state) || - test_bit(ST_RXING, &portp->state)) ? 0 : 1); -} - -/*****************************************************************************/ - -/* - * Service all ports on a particular board. Assumes that the boards - * shared memory is enabled, and that the page pointer is pointed - * at the cdk header structure. - */ - -static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp) -{ - struct stliport *portp; - unsigned char hostbits[(STL_MAXCHANS / 8) + 1]; - unsigned char slavebits[(STL_MAXCHANS / 8) + 1]; - unsigned char __iomem *slavep; - int bitpos, bitat, bitsize; - int channr, nrdevs, slavebitchange; - - bitsize = brdp->bitsize; - nrdevs = brdp->nrdevs; - -/* - * Check if slave wants any service. Basically we try to do as - * little work as possible here. There are 2 levels of service - * bits. So if there is nothing to do we bail early. We check - * 8 service bits at a time in the inner loop, so we can bypass - * the lot if none of them want service. - */ - memcpy_fromio(&hostbits[0], (((unsigned char __iomem *) hdrp) + brdp->hostoffset), - bitsize); - - memset(&slavebits[0], 0, bitsize); - slavebitchange = 0; - - for (bitpos = 0; (bitpos < bitsize); bitpos++) { - if (hostbits[bitpos] == 0) - continue; - channr = bitpos * 8; - for (bitat = 0x1; (channr < nrdevs); channr++, bitat <<= 1) { - if (hostbits[bitpos] & bitat) { - portp = brdp->ports[(channr - 1)]; - if (stli_hostcmd(brdp, portp)) { - slavebitchange++; - slavebits[bitpos] |= bitat; - } - } - } - } - -/* - * If any of the ports are no longer busy then update them in the - * slave request bits. We need to do this after, since a host port - * service may initiate more slave requests. - */ - if (slavebitchange) { - hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); - slavep = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset; - for (bitpos = 0; (bitpos < bitsize); bitpos++) { - if (readb(slavebits + bitpos)) - writeb(readb(slavep + bitpos) & ~slavebits[bitpos], slavebits + bitpos); - } - } -} - -/*****************************************************************************/ - -/* - * Driver poll routine. This routine polls the boards in use and passes - * messages back up to host when necessary. This is actually very - * CPU efficient, since we will always have the kernel poll clock, it - * adds only a few cycles when idle (since board service can be - * determined very easily), but when loaded generates no interrupts - * (with their expensive associated context change). - */ - -static void stli_poll(unsigned long arg) -{ - cdkhdr_t __iomem *hdrp; - struct stlibrd *brdp; - unsigned int brdnr; - - mod_timer(&stli_timerlist, STLI_TIMEOUT); - -/* - * Check each board and do any servicing required. - */ - for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) { - brdp = stli_brds[brdnr]; - if (brdp == NULL) - continue; - if (!test_bit(BST_STARTED, &brdp->state)) - continue; - - spin_lock(&brd_lock); - EBRDENABLE(brdp); - hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); - if (readb(&hdrp->hostreq)) - stli_brdpoll(brdp, hdrp); - EBRDDISABLE(brdp); - spin_unlock(&brd_lock); - } -} - -/*****************************************************************************/ - -/* - * Translate the termios settings into the port setting structure of - * the slave. - */ - -static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, - asyport_t *pp, struct ktermios *tiosp) -{ - memset(pp, 0, sizeof(asyport_t)); - -/* - * Start of by setting the baud, char size, parity and stop bit info. - */ - pp->baudout = tty_get_baud_rate(tty); - if ((tiosp->c_cflag & CBAUD) == B38400) { - if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - pp->baudout = 57600; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - pp->baudout = 115200; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - pp->baudout = 230400; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - pp->baudout = 460800; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) - pp->baudout = (portp->baud_base / portp->custom_divisor); - } - if (pp->baudout > STL_MAXBAUD) - pp->baudout = STL_MAXBAUD; - pp->baudin = pp->baudout; - - switch (tiosp->c_cflag & CSIZE) { - case CS5: - pp->csize = 5; - break; - case CS6: - pp->csize = 6; - break; - case CS7: - pp->csize = 7; - break; - default: - pp->csize = 8; - break; - } - - if (tiosp->c_cflag & CSTOPB) - pp->stopbs = PT_STOP2; - else - pp->stopbs = PT_STOP1; - - if (tiosp->c_cflag & PARENB) { - if (tiosp->c_cflag & PARODD) - pp->parity = PT_ODDPARITY; - else - pp->parity = PT_EVENPARITY; - } else { - pp->parity = PT_NOPARITY; - } - -/* - * Set up any flow control options enabled. - */ - if (tiosp->c_iflag & IXON) { - pp->flow |= F_IXON; - if (tiosp->c_iflag & IXANY) - pp->flow |= F_IXANY; - } - if (tiosp->c_cflag & CRTSCTS) - pp->flow |= (F_RTSFLOW | F_CTSFLOW); - - pp->startin = tiosp->c_cc[VSTART]; - pp->stopin = tiosp->c_cc[VSTOP]; - pp->startout = tiosp->c_cc[VSTART]; - pp->stopout = tiosp->c_cc[VSTOP]; - -/* - * Set up the RX char marking mask with those RX error types we must - * catch. We can get the slave to help us out a little here, it will - * ignore parity errors and breaks for us, and mark parity errors in - * the data stream. - */ - if (tiosp->c_iflag & IGNPAR) - pp->iflag |= FI_IGNRXERRS; - if (tiosp->c_iflag & IGNBRK) - pp->iflag |= FI_IGNBREAK; - - portp->rxmarkmsk = 0; - if (tiosp->c_iflag & (INPCK | PARMRK)) - pp->iflag |= FI_1MARKRXERRS; - if (tiosp->c_iflag & BRKINT) - portp->rxmarkmsk |= BRKINT; - -/* - * Set up clocal processing as required. - */ - if (tiosp->c_cflag & CLOCAL) - portp->port.flags &= ~ASYNC_CHECK_CD; - else - portp->port.flags |= ASYNC_CHECK_CD; - -/* - * Transfer any persistent flags into the asyport structure. - */ - pp->pflag = (portp->pflag & 0xffff); - pp->vmin = (portp->pflag & P_RXIMIN) ? 1 : 0; - pp->vtime = (portp->pflag & P_RXITIME) ? 1 : 0; - pp->cc[1] = (portp->pflag & P_RXTHOLD) ? 1 : 0; -} - -/*****************************************************************************/ - -/* - * Construct a slave signals structure for setting the DTR and RTS - * signals as specified. - */ - -static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts) -{ - memset(sp, 0, sizeof(asysigs_t)); - if (dtr >= 0) { - sp->signal |= SG_DTR; - sp->sigvalue |= ((dtr > 0) ? SG_DTR : 0); - } - if (rts >= 0) { - sp->signal |= SG_RTS; - sp->sigvalue |= ((rts > 0) ? SG_RTS : 0); - } -} - -/*****************************************************************************/ - -/* - * Convert the signals returned from the slave into a local TIOCM type - * signals value. We keep them locally in TIOCM format. - */ - -static long stli_mktiocm(unsigned long sigvalue) -{ - long tiocm = 0; - tiocm |= ((sigvalue & SG_DCD) ? TIOCM_CD : 0); - tiocm |= ((sigvalue & SG_CTS) ? TIOCM_CTS : 0); - tiocm |= ((sigvalue & SG_RI) ? TIOCM_RI : 0); - tiocm |= ((sigvalue & SG_DSR) ? TIOCM_DSR : 0); - tiocm |= ((sigvalue & SG_DTR) ? TIOCM_DTR : 0); - tiocm |= ((sigvalue & SG_RTS) ? TIOCM_RTS : 0); - return(tiocm); -} - -/*****************************************************************************/ - -/* - * All panels and ports actually attached have been worked out. All - * we need to do here is set up the appropriate per port data structures. - */ - -static int stli_initports(struct stlibrd *brdp) -{ - struct stliport *portp; - unsigned int i, panelnr, panelport; - - for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) { - portp = kzalloc(sizeof(struct stliport), GFP_KERNEL); - if (!portp) { - printk(KERN_WARNING "istallion: failed to allocate port structure\n"); - continue; - } - tty_port_init(&portp->port); - portp->port.ops = &stli_port_ops; - portp->magic = STLI_PORTMAGIC; - portp->portnr = i; - portp->brdnr = brdp->brdnr; - portp->panelnr = panelnr; - portp->baud_base = STL_BAUDBASE; - portp->port.close_delay = STL_CLOSEDELAY; - portp->closing_wait = 30 * HZ; - init_waitqueue_head(&portp->port.open_wait); - init_waitqueue_head(&portp->port.close_wait); - init_waitqueue_head(&portp->raw_wait); - panelport++; - if (panelport >= brdp->panels[panelnr]) { - panelport = 0; - panelnr++; - } - brdp->ports[i] = portp; - } - - return 0; -} - -/*****************************************************************************/ - -/* - * All the following routines are board specific hardware operations. - */ - -static void stli_ecpinit(struct stlibrd *brdp) -{ - unsigned long memconf; - - outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR)); - udelay(10); - outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); - udelay(100); - - memconf = (brdp->memaddr & ECP_ATADDRMASK) >> ECP_ATADDRSHFT; - outb(memconf, (brdp->iobase + ECP_ATMEMAR)); -} - -/*****************************************************************************/ - -static void stli_ecpenable(struct stlibrd *brdp) -{ - outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR)); -} - -/*****************************************************************************/ - -static void stli_ecpdisable(struct stlibrd *brdp) -{ - outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); -} - -/*****************************************************************************/ - -static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) -{ - void __iomem *ptr; - unsigned char val; - - if (offset > brdp->memsize) { - printk(KERN_ERR "istallion: shared memory pointer=%x out of " - "range at line=%d(%d), brd=%d\n", - (int) offset, line, __LINE__, brdp->brdnr); - ptr = NULL; - val = 0; - } else { - ptr = brdp->membase + (offset % ECP_ATPAGESIZE); - val = (unsigned char) (offset / ECP_ATPAGESIZE); - } - outb(val, (brdp->iobase + ECP_ATMEMPR)); - return(ptr); -} - -/*****************************************************************************/ - -static void stli_ecpreset(struct stlibrd *brdp) -{ - outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR)); - udelay(10); - outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); - udelay(500); -} - -/*****************************************************************************/ - -static void stli_ecpintr(struct stlibrd *brdp) -{ - outb(0x1, brdp->iobase); -} - -/*****************************************************************************/ - -/* - * The following set of functions act on ECP EISA boards. - */ - -static void stli_ecpeiinit(struct stlibrd *brdp) -{ - unsigned long memconf; - - outb(0x1, (brdp->iobase + ECP_EIBRDENAB)); - outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); - udelay(10); - outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); - udelay(500); - - memconf = (brdp->memaddr & ECP_EIADDRMASKL) >> ECP_EIADDRSHFTL; - outb(memconf, (brdp->iobase + ECP_EIMEMARL)); - memconf = (brdp->memaddr & ECP_EIADDRMASKH) >> ECP_EIADDRSHFTH; - outb(memconf, (brdp->iobase + ECP_EIMEMARH)); -} - -/*****************************************************************************/ - -static void stli_ecpeienable(struct stlibrd *brdp) -{ - outb(ECP_EIENABLE, (brdp->iobase + ECP_EICONFR)); -} - -/*****************************************************************************/ - -static void stli_ecpeidisable(struct stlibrd *brdp) -{ - outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); -} - -/*****************************************************************************/ - -static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line) -{ - void __iomem *ptr; - unsigned char val; - - if (offset > brdp->memsize) { - printk(KERN_ERR "istallion: shared memory pointer=%x out of " - "range at line=%d(%d), brd=%d\n", - (int) offset, line, __LINE__, brdp->brdnr); - ptr = NULL; - val = 0; - } else { - ptr = brdp->membase + (offset % ECP_EIPAGESIZE); - if (offset < ECP_EIPAGESIZE) - val = ECP_EIENABLE; - else - val = ECP_EIENABLE | 0x40; - } - outb(val, (brdp->iobase + ECP_EICONFR)); - return(ptr); -} - -/*****************************************************************************/ - -static void stli_ecpeireset(struct stlibrd *brdp) -{ - outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); - udelay(10); - outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); - udelay(500); -} - -/*****************************************************************************/ - -/* - * The following set of functions act on ECP MCA boards. - */ - -static void stli_ecpmcenable(struct stlibrd *brdp) -{ - outb(ECP_MCENABLE, (brdp->iobase + ECP_MCCONFR)); -} - -/*****************************************************************************/ - -static void stli_ecpmcdisable(struct stlibrd *brdp) -{ - outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR)); -} - -/*****************************************************************************/ - -static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) -{ - void __iomem *ptr; - unsigned char val; - - if (offset > brdp->memsize) { - printk(KERN_ERR "istallion: shared memory pointer=%x out of " - "range at line=%d(%d), brd=%d\n", - (int) offset, line, __LINE__, brdp->brdnr); - ptr = NULL; - val = 0; - } else { - ptr = brdp->membase + (offset % ECP_MCPAGESIZE); - val = ((unsigned char) (offset / ECP_MCPAGESIZE)) | ECP_MCENABLE; - } - outb(val, (brdp->iobase + ECP_MCCONFR)); - return(ptr); -} - -/*****************************************************************************/ - -static void stli_ecpmcreset(struct stlibrd *brdp) -{ - outb(ECP_MCSTOP, (brdp->iobase + ECP_MCCONFR)); - udelay(10); - outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR)); - udelay(500); -} - -/*****************************************************************************/ - -/* - * The following set of functions act on ECP PCI boards. - */ - -static void stli_ecppciinit(struct stlibrd *brdp) -{ - outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR)); - udelay(10); - outb(0, (brdp->iobase + ECP_PCICONFR)); - udelay(500); -} - -/*****************************************************************************/ - -static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line) -{ - void __iomem *ptr; - unsigned char val; - - if (offset > brdp->memsize) { - printk(KERN_ERR "istallion: shared memory pointer=%x out of " - "range at line=%d(%d), board=%d\n", - (int) offset, line, __LINE__, brdp->brdnr); - ptr = NULL; - val = 0; - } else { - ptr = brdp->membase + (offset % ECP_PCIPAGESIZE); - val = (offset / ECP_PCIPAGESIZE) << 1; - } - outb(val, (brdp->iobase + ECP_PCICONFR)); - return(ptr); -} - -/*****************************************************************************/ - -static void stli_ecppcireset(struct stlibrd *brdp) -{ - outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR)); - udelay(10); - outb(0, (brdp->iobase + ECP_PCICONFR)); - udelay(500); -} - -/*****************************************************************************/ - -/* - * The following routines act on ONboards. - */ - -static void stli_onbinit(struct stlibrd *brdp) -{ - unsigned long memconf; - - outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR)); - udelay(10); - outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR)); - mdelay(1000); - - memconf = (brdp->memaddr & ONB_ATADDRMASK) >> ONB_ATADDRSHFT; - outb(memconf, (brdp->iobase + ONB_ATMEMAR)); - outb(0x1, brdp->iobase); - mdelay(1); -} - -/*****************************************************************************/ - -static void stli_onbenable(struct stlibrd *brdp) -{ - outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR)); -} - -/*****************************************************************************/ - -static void stli_onbdisable(struct stlibrd *brdp) -{ - outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR)); -} - -/*****************************************************************************/ - -static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) -{ - void __iomem *ptr; - - if (offset > brdp->memsize) { - printk(KERN_ERR "istallion: shared memory pointer=%x out of " - "range at line=%d(%d), brd=%d\n", - (int) offset, line, __LINE__, brdp->brdnr); - ptr = NULL; - } else { - ptr = brdp->membase + (offset % ONB_ATPAGESIZE); - } - return(ptr); -} - -/*****************************************************************************/ - -static void stli_onbreset(struct stlibrd *brdp) -{ - outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR)); - udelay(10); - outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR)); - mdelay(1000); -} - -/*****************************************************************************/ - -/* - * The following routines act on ONboard EISA. - */ - -static void stli_onbeinit(struct stlibrd *brdp) -{ - unsigned long memconf; - - outb(0x1, (brdp->iobase + ONB_EIBRDENAB)); - outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); - udelay(10); - outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); - mdelay(1000); - - memconf = (brdp->memaddr & ONB_EIADDRMASKL) >> ONB_EIADDRSHFTL; - outb(memconf, (brdp->iobase + ONB_EIMEMARL)); - memconf = (brdp->memaddr & ONB_EIADDRMASKH) >> ONB_EIADDRSHFTH; - outb(memconf, (brdp->iobase + ONB_EIMEMARH)); - outb(0x1, brdp->iobase); - mdelay(1); -} - -/*****************************************************************************/ - -static void stli_onbeenable(struct stlibrd *brdp) -{ - outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR)); -} - -/*****************************************************************************/ - -static void stli_onbedisable(struct stlibrd *brdp) -{ - outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); -} - -/*****************************************************************************/ - -static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line) -{ - void __iomem *ptr; - unsigned char val; - - if (offset > brdp->memsize) { - printk(KERN_ERR "istallion: shared memory pointer=%x out of " - "range at line=%d(%d), brd=%d\n", - (int) offset, line, __LINE__, brdp->brdnr); - ptr = NULL; - val = 0; - } else { - ptr = brdp->membase + (offset % ONB_EIPAGESIZE); - if (offset < ONB_EIPAGESIZE) - val = ONB_EIENABLE; - else - val = ONB_EIENABLE | 0x40; - } - outb(val, (brdp->iobase + ONB_EICONFR)); - return(ptr); -} - -/*****************************************************************************/ - -static void stli_onbereset(struct stlibrd *brdp) -{ - outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); - udelay(10); - outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); - mdelay(1000); -} - -/*****************************************************************************/ - -/* - * The following routines act on Brumby boards. - */ - -static void stli_bbyinit(struct stlibrd *brdp) -{ - outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR)); - udelay(10); - outb(0, (brdp->iobase + BBY_ATCONFR)); - mdelay(1000); - outb(0x1, brdp->iobase); - mdelay(1); -} - -/*****************************************************************************/ - -static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line) -{ - void __iomem *ptr; - unsigned char val; - - BUG_ON(offset > brdp->memsize); - - ptr = brdp->membase + (offset % BBY_PAGESIZE); - val = (unsigned char) (offset / BBY_PAGESIZE); - outb(val, (brdp->iobase + BBY_ATCONFR)); - return(ptr); -} - -/*****************************************************************************/ - -static void stli_bbyreset(struct stlibrd *brdp) -{ - outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR)); - udelay(10); - outb(0, (brdp->iobase + BBY_ATCONFR)); - mdelay(1000); -} - -/*****************************************************************************/ - -/* - * The following routines act on original old Stallion boards. - */ - -static void stli_stalinit(struct stlibrd *brdp) -{ - outb(0x1, brdp->iobase); - mdelay(1000); -} - -/*****************************************************************************/ - -static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) -{ - BUG_ON(offset > brdp->memsize); - return brdp->membase + (offset % STAL_PAGESIZE); -} - -/*****************************************************************************/ - -static void stli_stalreset(struct stlibrd *brdp) -{ - u32 __iomem *vecp; - - vecp = (u32 __iomem *) (brdp->membase + 0x30); - writel(0xffff0000, vecp); - outb(0, brdp->iobase); - mdelay(1000); -} - -/*****************************************************************************/ - -/* - * Try to find an ECP board and initialize it. This handles only ECP - * board types. - */ - -static int stli_initecp(struct stlibrd *brdp) -{ - cdkecpsig_t sig; - cdkecpsig_t __iomem *sigsp; - unsigned int status, nxtid; - char *name; - int retval, panelnr, nrports; - - if ((brdp->iobase == 0) || (brdp->memaddr == 0)) { - retval = -ENODEV; - goto err; - } - - brdp->iosize = ECP_IOSIZE; - - if (!request_region(brdp->iobase, brdp->iosize, "istallion")) { - retval = -EIO; - goto err; - } - -/* - * Based on the specific board type setup the common vars to access - * and enable shared memory. Set all board specific information now - * as well. - */ - switch (brdp->brdtype) { - case BRD_ECP: - brdp->memsize = ECP_MEMSIZE; - brdp->pagesize = ECP_ATPAGESIZE; - brdp->init = stli_ecpinit; - brdp->enable = stli_ecpenable; - brdp->reenable = stli_ecpenable; - brdp->disable = stli_ecpdisable; - brdp->getmemptr = stli_ecpgetmemptr; - brdp->intr = stli_ecpintr; - brdp->reset = stli_ecpreset; - name = "serial(EC8/64)"; - break; - - case BRD_ECPE: - brdp->memsize = ECP_MEMSIZE; - brdp->pagesize = ECP_EIPAGESIZE; - brdp->init = stli_ecpeiinit; - brdp->enable = stli_ecpeienable; - brdp->reenable = stli_ecpeienable; - brdp->disable = stli_ecpeidisable; - brdp->getmemptr = stli_ecpeigetmemptr; - brdp->intr = stli_ecpintr; - brdp->reset = stli_ecpeireset; - name = "serial(EC8/64-EI)"; - break; - - case BRD_ECPMC: - brdp->memsize = ECP_MEMSIZE; - brdp->pagesize = ECP_MCPAGESIZE; - brdp->init = NULL; - brdp->enable = stli_ecpmcenable; - brdp->reenable = stli_ecpmcenable; - brdp->disable = stli_ecpmcdisable; - brdp->getmemptr = stli_ecpmcgetmemptr; - brdp->intr = stli_ecpintr; - brdp->reset = stli_ecpmcreset; - name = "serial(EC8/64-MCA)"; - break; - - case BRD_ECPPCI: - brdp->memsize = ECP_PCIMEMSIZE; - brdp->pagesize = ECP_PCIPAGESIZE; - brdp->init = stli_ecppciinit; - brdp->enable = NULL; - brdp->reenable = NULL; - brdp->disable = NULL; - brdp->getmemptr = stli_ecppcigetmemptr; - brdp->intr = stli_ecpintr; - brdp->reset = stli_ecppcireset; - name = "serial(EC/RA-PCI)"; - break; - - default: - retval = -EINVAL; - goto err_reg; - } - -/* - * The per-board operations structure is all set up, so now let's go - * and get the board operational. Firstly initialize board configuration - * registers. Set the memory mapping info so we can get at the boards - * shared memory. - */ - EBRDINIT(brdp); - - brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize); - if (brdp->membase == NULL) { - retval = -ENOMEM; - goto err_reg; - } - -/* - * Now that all specific code is set up, enable the shared memory and - * look for the a signature area that will tell us exactly what board - * this is, and what it is connected to it. - */ - EBRDENABLE(brdp); - sigsp = (cdkecpsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR); - memcpy_fromio(&sig, sigsp, sizeof(cdkecpsig_t)); - EBRDDISABLE(brdp); - - if (sig.magic != cpu_to_le32(ECP_MAGIC)) { - retval = -ENODEV; - goto err_unmap; - } - -/* - * Scan through the signature looking at the panels connected to the - * board. Calculate the total number of ports as we go. - */ - for (panelnr = 0, nxtid = 0; (panelnr < STL_MAXPANELS); panelnr++) { - status = sig.panelid[nxtid]; - if ((status & ECH_PNLIDMASK) != nxtid) - break; - - brdp->panelids[panelnr] = status; - nrports = (status & ECH_PNL16PORT) ? 16 : 8; - if ((nrports == 16) && ((status & ECH_PNLXPID) == 0)) - nxtid++; - brdp->panels[panelnr] = nrports; - brdp->nrports += nrports; - nxtid++; - brdp->nrpanels++; - } - - - set_bit(BST_FOUND, &brdp->state); - return 0; -err_unmap: - iounmap(brdp->membase); - brdp->membase = NULL; -err_reg: - release_region(brdp->iobase, brdp->iosize); -err: - return retval; -} - -/*****************************************************************************/ - -/* - * Try to find an ONboard, Brumby or Stallion board and initialize it. - * This handles only these board types. - */ - -static int stli_initonb(struct stlibrd *brdp) -{ - cdkonbsig_t sig; - cdkonbsig_t __iomem *sigsp; - char *name; - int i, retval; - -/* - * Do a basic sanity check on the IO and memory addresses. - */ - if (brdp->iobase == 0 || brdp->memaddr == 0) { - retval = -ENODEV; - goto err; - } - - brdp->iosize = ONB_IOSIZE; - - if (!request_region(brdp->iobase, brdp->iosize, "istallion")) { - retval = -EIO; - goto err; - } - -/* - * Based on the specific board type setup the common vars to access - * and enable shared memory. Set all board specific information now - * as well. - */ - switch (brdp->brdtype) { - case BRD_ONBOARD: - case BRD_ONBOARD2: - brdp->memsize = ONB_MEMSIZE; - brdp->pagesize = ONB_ATPAGESIZE; - brdp->init = stli_onbinit; - brdp->enable = stli_onbenable; - brdp->reenable = stli_onbenable; - brdp->disable = stli_onbdisable; - brdp->getmemptr = stli_onbgetmemptr; - brdp->intr = stli_ecpintr; - brdp->reset = stli_onbreset; - if (brdp->memaddr > 0x100000) - brdp->enabval = ONB_MEMENABHI; - else - brdp->enabval = ONB_MEMENABLO; - name = "serial(ONBoard)"; - break; - - case BRD_ONBOARDE: - brdp->memsize = ONB_EIMEMSIZE; - brdp->pagesize = ONB_EIPAGESIZE; - brdp->init = stli_onbeinit; - brdp->enable = stli_onbeenable; - brdp->reenable = stli_onbeenable; - brdp->disable = stli_onbedisable; - brdp->getmemptr = stli_onbegetmemptr; - brdp->intr = stli_ecpintr; - brdp->reset = stli_onbereset; - name = "serial(ONBoard/E)"; - break; - - case BRD_BRUMBY4: - brdp->memsize = BBY_MEMSIZE; - brdp->pagesize = BBY_PAGESIZE; - brdp->init = stli_bbyinit; - brdp->enable = NULL; - brdp->reenable = NULL; - brdp->disable = NULL; - brdp->getmemptr = stli_bbygetmemptr; - brdp->intr = stli_ecpintr; - brdp->reset = stli_bbyreset; - name = "serial(Brumby)"; - break; - - case BRD_STALLION: - brdp->memsize = STAL_MEMSIZE; - brdp->pagesize = STAL_PAGESIZE; - brdp->init = stli_stalinit; - brdp->enable = NULL; - brdp->reenable = NULL; - brdp->disable = NULL; - brdp->getmemptr = stli_stalgetmemptr; - brdp->intr = stli_ecpintr; - brdp->reset = stli_stalreset; - name = "serial(Stallion)"; - break; - - default: - retval = -EINVAL; - goto err_reg; - } - -/* - * The per-board operations structure is all set up, so now let's go - * and get the board operational. Firstly initialize board configuration - * registers. Set the memory mapping info so we can get at the boards - * shared memory. - */ - EBRDINIT(brdp); - - brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize); - if (brdp->membase == NULL) { - retval = -ENOMEM; - goto err_reg; - } - -/* - * Now that all specific code is set up, enable the shared memory and - * look for the a signature area that will tell us exactly what board - * this is, and how many ports. - */ - EBRDENABLE(brdp); - sigsp = (cdkonbsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR); - memcpy_fromio(&sig, sigsp, sizeof(cdkonbsig_t)); - EBRDDISABLE(brdp); - - if (sig.magic0 != cpu_to_le16(ONB_MAGIC0) || - sig.magic1 != cpu_to_le16(ONB_MAGIC1) || - sig.magic2 != cpu_to_le16(ONB_MAGIC2) || - sig.magic3 != cpu_to_le16(ONB_MAGIC3)) { - retval = -ENODEV; - goto err_unmap; - } - -/* - * Scan through the signature alive mask and calculate how many ports - * there are on this board. - */ - brdp->nrpanels = 1; - if (sig.amask1) { - brdp->nrports = 32; - } else { - for (i = 0; (i < 16); i++) { - if (((sig.amask0 << i) & 0x8000) == 0) - break; - } - brdp->nrports = i; - } - brdp->panels[0] = brdp->nrports; - - - set_bit(BST_FOUND, &brdp->state); - return 0; -err_unmap: - iounmap(brdp->membase); - brdp->membase = NULL; -err_reg: - release_region(brdp->iobase, brdp->iosize); -err: - return retval; -} - -/*****************************************************************************/ - -/* - * Start up a running board. This routine is only called after the - * code has been down loaded to the board and is operational. It will - * read in the memory map, and get the show on the road... - */ - -static int stli_startbrd(struct stlibrd *brdp) -{ - cdkhdr_t __iomem *hdrp; - cdkmem_t __iomem *memp; - cdkasy_t __iomem *ap; - unsigned long flags; - unsigned int portnr, nrdevs, i; - struct stliport *portp; - int rc = 0; - u32 memoff; - - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); - nrdevs = hdrp->nrdevs; - -#if 0 - printk("%s(%d): CDK version %d.%d.%d --> " - "nrdevs=%d memp=%x hostp=%x slavep=%x\n", - __FILE__, __LINE__, readb(&hdrp->ver_release), readb(&hdrp->ver_modification), - readb(&hdrp->ver_fix), nrdevs, (int) readl(&hdrp->memp), readl(&hdrp->hostp), - readl(&hdrp->slavep)); -#endif - - if (nrdevs < (brdp->nrports + 1)) { - printk(KERN_ERR "istallion: slave failed to allocate memory for " - "all devices, devices=%d\n", nrdevs); - brdp->nrports = nrdevs - 1; - } - brdp->nrdevs = nrdevs; - brdp->hostoffset = hdrp->hostp - CDK_CDKADDR; - brdp->slaveoffset = hdrp->slavep - CDK_CDKADDR; - brdp->bitsize = (nrdevs + 7) / 8; - memoff = readl(&hdrp->memp); - if (memoff > brdp->memsize) { - printk(KERN_ERR "istallion: corrupted shared memory region?\n"); - rc = -EIO; - goto stli_donestartup; - } - memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff); - if (readw(&memp->dtype) != TYP_ASYNCTRL) { - printk(KERN_ERR "istallion: no slave control device found\n"); - goto stli_donestartup; - } - memp++; - -/* - * Cycle through memory allocation of each port. We are guaranteed to - * have all ports inside the first page of slave window, so no need to - * change pages while reading memory map. - */ - for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++, memp++) { - if (readw(&memp->dtype) != TYP_ASYNC) - break; - portp = brdp->ports[portnr]; - if (portp == NULL) - break; - portp->devnr = i; - portp->addr = readl(&memp->offset); - portp->reqbit = (unsigned char) (0x1 << (i * 8 / nrdevs)); - portp->portidx = (unsigned char) (i / 8); - portp->portbit = (unsigned char) (0x1 << (i % 8)); - } - - writeb(0xff, &hdrp->slavereq); - -/* - * For each port setup a local copy of the RX and TX buffer offsets - * and sizes. We do this separate from the above, because we need to - * move the shared memory page... - */ - for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++) { - portp = brdp->ports[portnr]; - if (portp == NULL) - break; - if (portp->addr == 0) - break; - ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); - if (ap != NULL) { - portp->rxsize = readw(&ap->rxq.size); - portp->txsize = readw(&ap->txq.size); - portp->rxoffset = readl(&ap->rxq.offset); - portp->txoffset = readl(&ap->txq.offset); - } - } - -stli_donestartup: - EBRDDISABLE(brdp); - spin_unlock_irqrestore(&brd_lock, flags); - - if (rc == 0) - set_bit(BST_STARTED, &brdp->state); - - if (! stli_timeron) { - stli_timeron++; - mod_timer(&stli_timerlist, STLI_TIMEOUT); - } - - return rc; -} - -/*****************************************************************************/ - -/* - * Probe and initialize the specified board. - */ - -static int __devinit stli_brdinit(struct stlibrd *brdp) -{ - int retval; - - switch (brdp->brdtype) { - case BRD_ECP: - case BRD_ECPE: - case BRD_ECPMC: - case BRD_ECPPCI: - retval = stli_initecp(brdp); - break; - case BRD_ONBOARD: - case BRD_ONBOARDE: - case BRD_ONBOARD2: - case BRD_BRUMBY4: - case BRD_STALLION: - retval = stli_initonb(brdp); - break; - default: - printk(KERN_ERR "istallion: board=%d is unknown board " - "type=%d\n", brdp->brdnr, brdp->brdtype); - retval = -ENODEV; - } - - if (retval) - return retval; - - stli_initports(brdp); - printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x " - "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype], - brdp->brdnr, brdp->iobase, (int) brdp->memaddr, - brdp->nrpanels, brdp->nrports); - return 0; -} - -#if STLI_EISAPROBE != 0 -/*****************************************************************************/ - -/* - * Probe around trying to find where the EISA boards shared memory - * might be. This is a bit if hack, but it is the best we can do. - */ - -static int stli_eisamemprobe(struct stlibrd *brdp) -{ - cdkecpsig_t ecpsig, __iomem *ecpsigp; - cdkonbsig_t onbsig, __iomem *onbsigp; - int i, foundit; - -/* - * First up we reset the board, to get it into a known state. There - * is only 2 board types here we need to worry about. Don;t use the - * standard board init routine here, it programs up the shared - * memory address, and we don't know it yet... - */ - if (brdp->brdtype == BRD_ECPE) { - outb(0x1, (brdp->iobase + ECP_EIBRDENAB)); - outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); - udelay(10); - outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); - udelay(500); - stli_ecpeienable(brdp); - } else if (brdp->brdtype == BRD_ONBOARDE) { - outb(0x1, (brdp->iobase + ONB_EIBRDENAB)); - outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); - udelay(10); - outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); - mdelay(100); - outb(0x1, brdp->iobase); - mdelay(1); - stli_onbeenable(brdp); - } else { - return -ENODEV; - } - - foundit = 0; - brdp->memsize = ECP_MEMSIZE; - -/* - * Board shared memory is enabled, so now we have a poke around and - * see if we can find it. - */ - for (i = 0; (i < stli_eisamempsize); i++) { - brdp->memaddr = stli_eisamemprobeaddrs[i]; - brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize); - if (brdp->membase == NULL) - continue; - - if (brdp->brdtype == BRD_ECPE) { - ecpsigp = stli_ecpeigetmemptr(brdp, - CDK_SIGADDR, __LINE__); - memcpy_fromio(&ecpsig, ecpsigp, sizeof(cdkecpsig_t)); - if (ecpsig.magic == cpu_to_le32(ECP_MAGIC)) - foundit = 1; - } else { - onbsigp = (cdkonbsig_t __iomem *) stli_onbegetmemptr(brdp, - CDK_SIGADDR, __LINE__); - memcpy_fromio(&onbsig, onbsigp, sizeof(cdkonbsig_t)); - if ((onbsig.magic0 == cpu_to_le16(ONB_MAGIC0)) && - (onbsig.magic1 == cpu_to_le16(ONB_MAGIC1)) && - (onbsig.magic2 == cpu_to_le16(ONB_MAGIC2)) && - (onbsig.magic3 == cpu_to_le16(ONB_MAGIC3))) - foundit = 1; - } - - iounmap(brdp->membase); - if (foundit) - break; - } - -/* - * Regardless of whether we found the shared memory or not we must - * disable the region. After that return success or failure. - */ - if (brdp->brdtype == BRD_ECPE) - stli_ecpeidisable(brdp); - else - stli_onbedisable(brdp); - - if (! foundit) { - brdp->memaddr = 0; - brdp->membase = NULL; - printk(KERN_ERR "istallion: failed to probe shared memory " - "region for %s in EISA slot=%d\n", - stli_brdnames[brdp->brdtype], (brdp->iobase >> 12)); - return -ENODEV; - } - return 0; -} -#endif - -static int stli_getbrdnr(void) -{ - unsigned int i; - - for (i = 0; i < STL_MAXBRDS; i++) { - if (!stli_brds[i]) { - if (i >= stli_nrbrds) - stli_nrbrds = i + 1; - return i; - } - } - return -1; -} - -#if STLI_EISAPROBE != 0 -/*****************************************************************************/ - -/* - * Probe around and try to find any EISA boards in system. The biggest - * problem here is finding out what memory address is associated with - * an EISA board after it is found. The registers of the ECPE and - * ONboardE are not readable - so we can't read them from there. We - * don't have access to the EISA CMOS (or EISA BIOS) so we don't - * actually have any way to find out the real value. The best we can - * do is go probing around in the usual places hoping we can find it. - */ - -static int __init stli_findeisabrds(void) -{ - struct stlibrd *brdp; - unsigned int iobase, eid, i; - int brdnr, found = 0; - -/* - * Firstly check if this is an EISA system. If this is not an EISA system then - * don't bother going any further! - */ - if (EISA_bus) - return 0; - -/* - * Looks like an EISA system, so go searching for EISA boards. - */ - for (iobase = 0x1000; (iobase <= 0xc000); iobase += 0x1000) { - outb(0xff, (iobase + 0xc80)); - eid = inb(iobase + 0xc80); - eid |= inb(iobase + 0xc81) << 8; - if (eid != STL_EISAID) - continue; - -/* - * We have found a board. Need to check if this board was - * statically configured already (just in case!). - */ - for (i = 0; (i < STL_MAXBRDS); i++) { - brdp = stli_brds[i]; - if (brdp == NULL) - continue; - if (brdp->iobase == iobase) - break; - } - if (i < STL_MAXBRDS) - continue; - -/* - * We have found a Stallion board and it is not configured already. - * Allocate a board structure and initialize it. - */ - if ((brdp = stli_allocbrd()) == NULL) - return found ? : -ENOMEM; - brdnr = stli_getbrdnr(); - if (brdnr < 0) - return found ? : -ENOMEM; - brdp->brdnr = (unsigned int)brdnr; - eid = inb(iobase + 0xc82); - if (eid == ECP_EISAID) - brdp->brdtype = BRD_ECPE; - else if (eid == ONB_EISAID) - brdp->brdtype = BRD_ONBOARDE; - else - brdp->brdtype = BRD_UNKNOWN; - brdp->iobase = iobase; - outb(0x1, (iobase + 0xc84)); - if (stli_eisamemprobe(brdp)) - outb(0, (iobase + 0xc84)); - if (stli_brdinit(brdp) < 0) { - kfree(brdp); - continue; - } - - stli_brds[brdp->brdnr] = brdp; - found++; - - for (i = 0; i < brdp->nrports; i++) - tty_register_device(stli_serial, - brdp->brdnr * STL_MAXPORTS + i, NULL); - } - - return found; -} -#else -static inline int stli_findeisabrds(void) { return 0; } -#endif - -/*****************************************************************************/ - -/* - * Find the next available board number that is free. - */ - -/*****************************************************************************/ - -/* - * We have a Stallion board. Allocate a board structure and - * initialize it. Read its IO and MEMORY resources from PCI - * configuration space. - */ - -static int __devinit stli_pciprobe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct stlibrd *brdp; - unsigned int i; - int brdnr, retval = -EIO; - - retval = pci_enable_device(pdev); - if (retval) - goto err; - brdp = stli_allocbrd(); - if (brdp == NULL) { - retval = -ENOMEM; - goto err; - } - mutex_lock(&stli_brdslock); - brdnr = stli_getbrdnr(); - if (brdnr < 0) { - printk(KERN_INFO "istallion: too many boards found, " - "maximum supported %d\n", STL_MAXBRDS); - mutex_unlock(&stli_brdslock); - retval = -EIO; - goto err_fr; - } - brdp->brdnr = (unsigned int)brdnr; - stli_brds[brdp->brdnr] = brdp; - mutex_unlock(&stli_brdslock); - brdp->brdtype = BRD_ECPPCI; -/* - * We have all resources from the board, so lets setup the actual - * board structure now. - */ - brdp->iobase = pci_resource_start(pdev, 3); - brdp->memaddr = pci_resource_start(pdev, 2); - retval = stli_brdinit(brdp); - if (retval) - goto err_null; - - set_bit(BST_PROBED, &brdp->state); - pci_set_drvdata(pdev, brdp); - - EBRDENABLE(brdp); - brdp->enable = NULL; - brdp->disable = NULL; - - for (i = 0; i < brdp->nrports; i++) - tty_register_device(stli_serial, brdp->brdnr * STL_MAXPORTS + i, - &pdev->dev); - - return 0; -err_null: - stli_brds[brdp->brdnr] = NULL; -err_fr: - kfree(brdp); -err: - return retval; -} - -static void __devexit stli_pciremove(struct pci_dev *pdev) -{ - struct stlibrd *brdp = pci_get_drvdata(pdev); - - stli_cleanup_ports(brdp); - - iounmap(brdp->membase); - if (brdp->iosize > 0) - release_region(brdp->iobase, brdp->iosize); - - stli_brds[brdp->brdnr] = NULL; - kfree(brdp); -} - -static struct pci_driver stli_pcidriver = { - .name = "istallion", - .id_table = istallion_pci_tbl, - .probe = stli_pciprobe, - .remove = __devexit_p(stli_pciremove) -}; -/*****************************************************************************/ - -/* - * Allocate a new board structure. Fill out the basic info in it. - */ - -static struct stlibrd *stli_allocbrd(void) -{ - struct stlibrd *brdp; - - brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL); - if (!brdp) { - printk(KERN_ERR "istallion: failed to allocate memory " - "(size=%Zd)\n", sizeof(struct stlibrd)); - return NULL; - } - brdp->magic = STLI_BOARDMAGIC; - return brdp; -} - -/*****************************************************************************/ - -/* - * Scan through all the boards in the configuration and see what we - * can find. - */ - -static int __init stli_initbrds(void) -{ - struct stlibrd *brdp, *nxtbrdp; - struct stlconf conf; - unsigned int i, j, found = 0; - int retval; - - for (stli_nrbrds = 0; stli_nrbrds < ARRAY_SIZE(stli_brdsp); - stli_nrbrds++) { - memset(&conf, 0, sizeof(conf)); - if (stli_parsebrd(&conf, stli_brdsp[stli_nrbrds]) == 0) - continue; - if ((brdp = stli_allocbrd()) == NULL) - continue; - brdp->brdnr = stli_nrbrds; - brdp->brdtype = conf.brdtype; - brdp->iobase = conf.ioaddr1; - brdp->memaddr = conf.memaddr; - if (stli_brdinit(brdp) < 0) { - kfree(brdp); - continue; - } - stli_brds[brdp->brdnr] = brdp; - found++; - - for (i = 0; i < brdp->nrports; i++) - tty_register_device(stli_serial, - brdp->brdnr * STL_MAXPORTS + i, NULL); - } - - retval = stli_findeisabrds(); - if (retval > 0) - found += retval; - -/* - * All found boards are initialized. Now for a little optimization, if - * no boards are sharing the "shared memory" regions then we can just - * leave them all enabled. This is in fact the usual case. - */ - stli_shared = 0; - if (stli_nrbrds > 1) { - for (i = 0; (i < stli_nrbrds); i++) { - brdp = stli_brds[i]; - if (brdp == NULL) - continue; - for (j = i + 1; (j < stli_nrbrds); j++) { - nxtbrdp = stli_brds[j]; - if (nxtbrdp == NULL) - continue; - if ((brdp->membase >= nxtbrdp->membase) && - (brdp->membase <= (nxtbrdp->membase + - nxtbrdp->memsize - 1))) { - stli_shared++; - break; - } - } - } - } - - if (stli_shared == 0) { - for (i = 0; (i < stli_nrbrds); i++) { - brdp = stli_brds[i]; - if (brdp == NULL) - continue; - if (test_bit(BST_FOUND, &brdp->state)) { - EBRDENABLE(brdp); - brdp->enable = NULL; - brdp->disable = NULL; - } - } - } - - retval = pci_register_driver(&stli_pcidriver); - if (retval && found == 0) { - printk(KERN_ERR "Neither isa nor eisa cards found nor pci " - "driver can be registered!\n"); - goto err; - } - - return 0; -err: - return retval; -} - -/*****************************************************************************/ - -/* - * Code to handle an "staliomem" read operation. This device is the - * contents of the board shared memory. It is used for down loading - * the slave image (and debugging :-) - */ - -static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp) -{ - unsigned long flags; - void __iomem *memptr; - struct stlibrd *brdp; - unsigned int brdnr; - int size, n; - void *p; - loff_t off = *offp; - - brdnr = iminor(fp->f_path.dentry->d_inode); - if (brdnr >= stli_nrbrds) - return -ENODEV; - brdp = stli_brds[brdnr]; - if (brdp == NULL) - return -ENODEV; - if (brdp->state == 0) - return -ENODEV; - if (off >= brdp->memsize || off + count < off) - return 0; - - size = min(count, (size_t)(brdp->memsize - off)); - - /* - * Copy the data a page at a time - */ - - p = (void *)__get_free_page(GFP_KERNEL); - if(p == NULL) - return -ENOMEM; - - while (size > 0) { - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - memptr = EBRDGETMEMPTR(brdp, off); - n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize))); - n = min(n, (int)PAGE_SIZE); - memcpy_fromio(p, memptr, n); - EBRDDISABLE(brdp); - spin_unlock_irqrestore(&brd_lock, flags); - if (copy_to_user(buf, p, n)) { - count = -EFAULT; - goto out; - } - off += n; - buf += n; - size -= n; - } -out: - *offp = off; - free_page((unsigned long)p); - return count; -} - -/*****************************************************************************/ - -/* - * Code to handle an "staliomem" write operation. This device is the - * contents of the board shared memory. It is used for down loading - * the slave image (and debugging :-) - * - * FIXME: copy under lock - */ - -static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp) -{ - unsigned long flags; - void __iomem *memptr; - struct stlibrd *brdp; - char __user *chbuf; - unsigned int brdnr; - int size, n; - void *p; - loff_t off = *offp; - - brdnr = iminor(fp->f_path.dentry->d_inode); - - if (brdnr >= stli_nrbrds) - return -ENODEV; - brdp = stli_brds[brdnr]; - if (brdp == NULL) - return -ENODEV; - if (brdp->state == 0) - return -ENODEV; - if (off >= brdp->memsize || off + count < off) - return 0; - - chbuf = (char __user *) buf; - size = min(count, (size_t)(brdp->memsize - off)); - - /* - * Copy the data a page at a time - */ - - p = (void *)__get_free_page(GFP_KERNEL); - if(p == NULL) - return -ENOMEM; - - while (size > 0) { - n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize))); - n = min(n, (int)PAGE_SIZE); - if (copy_from_user(p, chbuf, n)) { - if (count == 0) - count = -EFAULT; - goto out; - } - spin_lock_irqsave(&brd_lock, flags); - EBRDENABLE(brdp); - memptr = EBRDGETMEMPTR(brdp, off); - memcpy_toio(memptr, p, n); - EBRDDISABLE(brdp); - spin_unlock_irqrestore(&brd_lock, flags); - off += n; - chbuf += n; - size -= n; - } -out: - free_page((unsigned long) p); - *offp = off; - return count; -} - -/*****************************************************************************/ - -/* - * Return the board stats structure to user app. - */ - -static int stli_getbrdstats(combrd_t __user *bp) -{ - struct stlibrd *brdp; - unsigned int i; - - if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t))) - return -EFAULT; - if (stli_brdstats.brd >= STL_MAXBRDS) - return -ENODEV; - brdp = stli_brds[stli_brdstats.brd]; - if (brdp == NULL) - return -ENODEV; - - memset(&stli_brdstats, 0, sizeof(combrd_t)); - - stli_brdstats.brd = brdp->brdnr; - stli_brdstats.type = brdp->brdtype; - stli_brdstats.hwid = 0; - stli_brdstats.state = brdp->state; - stli_brdstats.ioaddr = brdp->iobase; - stli_brdstats.memaddr = brdp->memaddr; - stli_brdstats.nrpanels = brdp->nrpanels; - stli_brdstats.nrports = brdp->nrports; - for (i = 0; (i < brdp->nrpanels); i++) { - stli_brdstats.panels[i].panel = i; - stli_brdstats.panels[i].hwid = brdp->panelids[i]; - stli_brdstats.panels[i].nrports = brdp->panels[i]; - } - - if (copy_to_user(bp, &stli_brdstats, sizeof(combrd_t))) - return -EFAULT; - return 0; -} - -/*****************************************************************************/ - -/* - * Resolve the referenced port number into a port struct pointer. - */ - -static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, - unsigned int portnr) -{ - struct stlibrd *brdp; - unsigned int i; - - if (brdnr >= STL_MAXBRDS) - return NULL; - brdp = stli_brds[brdnr]; - if (brdp == NULL) - return NULL; - for (i = 0; (i < panelnr); i++) - portnr += brdp->panels[i]; - if (portnr >= brdp->nrports) - return NULL; - return brdp->ports[portnr]; -} - -/*****************************************************************************/ - -/* - * Return the port stats structure to user app. A NULL port struct - * pointer passed in means that we need to find out from the app - * what port to get stats for (used through board control device). - */ - -static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp) -{ - unsigned long flags; - struct stlibrd *brdp; - int rc; - - memset(&stli_comstats, 0, sizeof(comstats_t)); - - if (portp == NULL) - return -ENODEV; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return -ENODEV; - - mutex_lock(&portp->port.mutex); - if (test_bit(BST_STARTED, &brdp->state)) { - if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS, - &stli_cdkstats, sizeof(asystats_t), 1)) < 0) { - mutex_unlock(&portp->port.mutex); - return rc; - } - } else { - memset(&stli_cdkstats, 0, sizeof(asystats_t)); - } - - stli_comstats.brd = portp->brdnr; - stli_comstats.panel = portp->panelnr; - stli_comstats.port = portp->portnr; - stli_comstats.state = portp->state; - stli_comstats.flags = portp->port.flags; - - spin_lock_irqsave(&brd_lock, flags); - if (tty != NULL) { - if (portp->port.tty == tty) { - stli_comstats.ttystate = tty->flags; - stli_comstats.rxbuffered = -1; - if (tty->termios != NULL) { - stli_comstats.cflags = tty->termios->c_cflag; - stli_comstats.iflags = tty->termios->c_iflag; - stli_comstats.oflags = tty->termios->c_oflag; - stli_comstats.lflags = tty->termios->c_lflag; - } - } - } - spin_unlock_irqrestore(&brd_lock, flags); - - stli_comstats.txtotal = stli_cdkstats.txchars; - stli_comstats.rxtotal = stli_cdkstats.rxchars + stli_cdkstats.ringover; - stli_comstats.txbuffered = stli_cdkstats.txringq; - stli_comstats.rxbuffered += stli_cdkstats.rxringq; - stli_comstats.rxoverrun = stli_cdkstats.overruns; - stli_comstats.rxparity = stli_cdkstats.parity; - stli_comstats.rxframing = stli_cdkstats.framing; - stli_comstats.rxlost = stli_cdkstats.ringover; - stli_comstats.rxbreaks = stli_cdkstats.rxbreaks; - stli_comstats.txbreaks = stli_cdkstats.txbreaks; - stli_comstats.txxon = stli_cdkstats.txstart; - stli_comstats.txxoff = stli_cdkstats.txstop; - stli_comstats.rxxon = stli_cdkstats.rxstart; - stli_comstats.rxxoff = stli_cdkstats.rxstop; - stli_comstats.rxrtsoff = stli_cdkstats.rtscnt / 2; - stli_comstats.rxrtson = stli_cdkstats.rtscnt - stli_comstats.rxrtsoff; - stli_comstats.modem = stli_cdkstats.dcdcnt; - stli_comstats.hwid = stli_cdkstats.hwid; - stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals); - mutex_unlock(&portp->port.mutex); - - return 0; -} - -/*****************************************************************************/ - -/* - * Return the port stats structure to user app. A NULL port struct - * pointer passed in means that we need to find out from the app - * what port to get stats for (used through board control device). - */ - -static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, - comstats_t __user *cp) -{ - struct stlibrd *brdp; - int rc; - - if (!portp) { - if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t))) - return -EFAULT; - portp = stli_getport(stli_comstats.brd, stli_comstats.panel, - stli_comstats.port); - if (!portp) - return -ENODEV; - } - - brdp = stli_brds[portp->brdnr]; - if (!brdp) - return -ENODEV; - - if ((rc = stli_portcmdstats(tty, portp)) < 0) - return rc; - - return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ? - -EFAULT : 0; -} - -/*****************************************************************************/ - -/* - * Clear the port stats structure. We also return it zeroed out... - */ - -static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp) -{ - struct stlibrd *brdp; - int rc; - - if (!portp) { - if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t))) - return -EFAULT; - portp = stli_getport(stli_comstats.brd, stli_comstats.panel, - stli_comstats.port); - if (!portp) - return -ENODEV; - } - - brdp = stli_brds[portp->brdnr]; - if (!brdp) - return -ENODEV; - - mutex_lock(&portp->port.mutex); - - if (test_bit(BST_STARTED, &brdp->state)) { - if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) { - mutex_unlock(&portp->port.mutex); - return rc; - } - } - - memset(&stli_comstats, 0, sizeof(comstats_t)); - stli_comstats.brd = portp->brdnr; - stli_comstats.panel = portp->panelnr; - stli_comstats.port = portp->portnr; - mutex_unlock(&portp->port.mutex); - - if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t))) - return -EFAULT; - return 0; -} - -/*****************************************************************************/ - -/* - * Return the entire driver ports structure to a user app. - */ - -static int stli_getportstruct(struct stliport __user *arg) -{ - struct stliport stli_dummyport; - struct stliport *portp; - - if (copy_from_user(&stli_dummyport, arg, sizeof(struct stliport))) - return -EFAULT; - portp = stli_getport(stli_dummyport.brdnr, stli_dummyport.panelnr, - stli_dummyport.portnr); - if (!portp) - return -ENODEV; - if (copy_to_user(arg, portp, sizeof(struct stliport))) - return -EFAULT; - return 0; -} - -/*****************************************************************************/ - -/* - * Return the entire driver board structure to a user app. - */ - -static int stli_getbrdstruct(struct stlibrd __user *arg) -{ - struct stlibrd stli_dummybrd; - struct stlibrd *brdp; - - if (copy_from_user(&stli_dummybrd, arg, sizeof(struct stlibrd))) - return -EFAULT; - if (stli_dummybrd.brdnr >= STL_MAXBRDS) - return -ENODEV; - brdp = stli_brds[stli_dummybrd.brdnr]; - if (!brdp) - return -ENODEV; - if (copy_to_user(arg, brdp, sizeof(struct stlibrd))) - return -EFAULT; - return 0; -} - -/*****************************************************************************/ - -/* - * The "staliomem" device is also required to do some special operations on - * the board. We need to be able to send an interrupt to the board, - * reset it, and start/stop it. - */ - -static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) -{ - struct stlibrd *brdp; - int brdnr, rc, done; - void __user *argp = (void __user *)arg; - -/* - * First up handle the board independent ioctls. - */ - done = 0; - rc = 0; - - switch (cmd) { - case COM_GETPORTSTATS: - rc = stli_getportstats(NULL, NULL, argp); - done++; - break; - case COM_CLRPORTSTATS: - rc = stli_clrportstats(NULL, argp); - done++; - break; - case COM_GETBRDSTATS: - rc = stli_getbrdstats(argp); - done++; - break; - case COM_READPORT: - rc = stli_getportstruct(argp); - done++; - break; - case COM_READBOARD: - rc = stli_getbrdstruct(argp); - done++; - break; - } - if (done) - return rc; - -/* - * Now handle the board specific ioctls. These all depend on the - * minor number of the device they were called from. - */ - brdnr = iminor(fp->f_dentry->d_inode); - if (brdnr >= STL_MAXBRDS) - return -ENODEV; - brdp = stli_brds[brdnr]; - if (!brdp) - return -ENODEV; - if (brdp->state == 0) - return -ENODEV; - - switch (cmd) { - case STL_BINTR: - EBRDINTR(brdp); - break; - case STL_BSTART: - rc = stli_startbrd(brdp); - break; - case STL_BSTOP: - clear_bit(BST_STARTED, &brdp->state); - break; - case STL_BRESET: - clear_bit(BST_STARTED, &brdp->state); - EBRDRESET(brdp); - if (stli_shared == 0) { - if (brdp->reenable != NULL) - (* brdp->reenable)(brdp); - } - break; - default: - rc = -ENOIOCTLCMD; - break; - } - return rc; -} - -static const struct tty_operations stli_ops = { - .open = stli_open, - .close = stli_close, - .write = stli_write, - .put_char = stli_putchar, - .flush_chars = stli_flushchars, - .write_room = stli_writeroom, - .chars_in_buffer = stli_charsinbuffer, - .ioctl = stli_ioctl, - .set_termios = stli_settermios, - .throttle = stli_throttle, - .unthrottle = stli_unthrottle, - .stop = stli_stop, - .start = stli_start, - .hangup = stli_hangup, - .flush_buffer = stli_flushbuffer, - .break_ctl = stli_breakctl, - .wait_until_sent = stli_waituntilsent, - .send_xchar = stli_sendxchar, - .tiocmget = stli_tiocmget, - .tiocmset = stli_tiocmset, - .proc_fops = &stli_proc_fops, -}; - -static const struct tty_port_operations stli_port_ops = { - .carrier_raised = stli_carrier_raised, - .dtr_rts = stli_dtr_rts, - .activate = stli_activate, - .shutdown = stli_shutdown, -}; - -/*****************************************************************************/ -/* - * Loadable module initialization stuff. - */ - -static void istallion_cleanup_isa(void) -{ - struct stlibrd *brdp; - unsigned int j; - - for (j = 0; (j < stli_nrbrds); j++) { - if ((brdp = stli_brds[j]) == NULL || - test_bit(BST_PROBED, &brdp->state)) - continue; - - stli_cleanup_ports(brdp); - - iounmap(brdp->membase); - if (brdp->iosize > 0) - release_region(brdp->iobase, brdp->iosize); - kfree(brdp); - stli_brds[j] = NULL; - } -} - -static int __init istallion_module_init(void) -{ - unsigned int i; - int retval; - - printk(KERN_INFO "%s: version %s\n", stli_drvtitle, stli_drvversion); - - spin_lock_init(&stli_lock); - spin_lock_init(&brd_lock); - - stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); - if (!stli_txcookbuf) { - printk(KERN_ERR "istallion: failed to allocate memory " - "(size=%d)\n", STLI_TXBUFSIZE); - retval = -ENOMEM; - goto err; - } - - stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); - if (!stli_serial) { - retval = -ENOMEM; - goto err_free; - } - - stli_serial->owner = THIS_MODULE; - stli_serial->driver_name = stli_drvname; - stli_serial->name = stli_serialname; - stli_serial->major = STL_SERIALMAJOR; - stli_serial->minor_start = 0; - stli_serial->type = TTY_DRIVER_TYPE_SERIAL; - stli_serial->subtype = SERIAL_TYPE_NORMAL; - stli_serial->init_termios = stli_deftermios; - stli_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(stli_serial, &stli_ops); - - retval = tty_register_driver(stli_serial); - if (retval) { - printk(KERN_ERR "istallion: failed to register serial driver\n"); - goto err_ttyput; - } - - retval = stli_initbrds(); - if (retval) - goto err_ttyunr; - -/* - * Set up a character driver for the shared memory region. We need this - * to down load the slave code image. Also it is a useful debugging tool. - */ - retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem); - if (retval) { - printk(KERN_ERR "istallion: failed to register serial memory " - "device\n"); - goto err_deinit; - } - - istallion_class = class_create(THIS_MODULE, "staliomem"); - for (i = 0; i < 4; i++) - device_create(istallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i), - NULL, "staliomem%d", i); - - return 0; -err_deinit: - pci_unregister_driver(&stli_pcidriver); - istallion_cleanup_isa(); -err_ttyunr: - tty_unregister_driver(stli_serial); -err_ttyput: - put_tty_driver(stli_serial); -err_free: - kfree(stli_txcookbuf); -err: - return retval; -} - -/*****************************************************************************/ - -static void __exit istallion_module_exit(void) -{ - unsigned int j; - - printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle, - stli_drvversion); - - if (stli_timeron) { - stli_timeron = 0; - del_timer_sync(&stli_timerlist); - } - - unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"); - - for (j = 0; j < 4; j++) - device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, j)); - class_destroy(istallion_class); - - pci_unregister_driver(&stli_pcidriver); - istallion_cleanup_isa(); - - tty_unregister_driver(stli_serial); - put_tty_driver(stli_serial); - - kfree(stli_txcookbuf); -} - -module_init(istallion_module_init); -module_exit(istallion_module_exit); diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c deleted file mode 100644 index 602643a40b4b..000000000000 --- a/drivers/char/riscom8.c +++ /dev/null @@ -1,1560 +0,0 @@ -/* - * linux/drivers/char/riscom.c -- RISCom/8 multiport serial driver. - * - * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) - * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. The RISCom/8 card - * programming info was obtained from various drivers for other OSes - * (FreeBSD, ISC, etc), but no source code from those drivers were - * directly included in this driver. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Revision 1.1 - * - * ChangeLog: - * Arnaldo Carvalho de Melo - 27-Jun-2001 - * - get rid of check_region and several cleanups - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "riscom8.h" -#include "riscom8_reg.h" - -/* Am I paranoid or not ? ;-) */ -#define RISCOM_PARANOIA_CHECK - -/* - * Crazy InteliCom/8 boards sometimes have swapped CTS & DSR signals. - * You can slightly speed up things by #undefing the following option, - * if you are REALLY sure that your board is correct one. - */ - -#define RISCOM_BRAIN_DAMAGED_CTS - -/* - * The following defines are mostly for testing purposes. But if you need - * some nice reporting in your syslog, you can define them also. - */ -#undef RC_REPORT_FIFO -#undef RC_REPORT_OVERRUN - - -#define RISCOM_LEGAL_FLAGS \ - (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ - ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ - ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) - -static struct tty_driver *riscom_driver; - -static DEFINE_SPINLOCK(riscom_lock); - -static struct riscom_board rc_board[RC_NBOARD] = { - { - .base = RC_IOBASE1, - }, - { - .base = RC_IOBASE2, - }, - { - .base = RC_IOBASE3, - }, - { - .base = RC_IOBASE4, - }, -}; - -static struct riscom_port rc_port[RC_NBOARD * RC_NPORT]; - -/* RISCom/8 I/O ports addresses (without address translation) */ -static unsigned short rc_ioport[] = { -#if 1 - 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, -#else - 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10, - 0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62, - 0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101 -#endif -}; -#define RC_NIOPORT ARRAY_SIZE(rc_ioport) - - -static int rc_paranoia_check(struct riscom_port const *port, - char *name, const char *routine) -{ -#ifdef RISCOM_PARANOIA_CHECK - static const char badmagic[] = KERN_INFO - "rc: Warning: bad riscom port magic number for device %s in %s\n"; - static const char badinfo[] = KERN_INFO - "rc: Warning: null riscom port for device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != RISCOM8_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * - * Service functions for RISCom/8 driver. - * - */ - -/* Get board number from pointer */ -static inline int board_No(struct riscom_board const *bp) -{ - return bp - rc_board; -} - -/* Get port number from pointer */ -static inline int port_No(struct riscom_port const *port) -{ - return RC_PORT(port - rc_port); -} - -/* Get pointer to board from pointer to port */ -static inline struct riscom_board *port_Board(struct riscom_port const *port) -{ - return &rc_board[RC_BOARD(port - rc_port)]; -} - -/* Input Byte from CL CD180 register */ -static inline unsigned char rc_in(struct riscom_board const *bp, - unsigned short reg) -{ - return inb(bp->base + RC_TO_ISA(reg)); -} - -/* Output Byte to CL CD180 register */ -static inline void rc_out(struct riscom_board const *bp, unsigned short reg, - unsigned char val) -{ - outb(val, bp->base + RC_TO_ISA(reg)); -} - -/* Wait for Channel Command Register ready */ -static void rc_wait_CCR(struct riscom_board const *bp) -{ - unsigned long delay; - - /* FIXME: need something more descriptive then 100000 :) */ - for (delay = 100000; delay; delay--) - if (!rc_in(bp, CD180_CCR)) - return; - - printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp)); -} - -/* - * RISCom/8 probe functions. - */ - -static int rc_request_io_range(struct riscom_board * const bp) -{ - int i; - - for (i = 0; i < RC_NIOPORT; i++) - if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1, - "RISCom/8")) { - goto out_release; - } - return 0; -out_release: - printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n", - board_No(bp), bp->base); - while (--i >= 0) - release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1); - return 1; -} - -static void rc_release_io_range(struct riscom_board * const bp) -{ - int i; - - for (i = 0; i < RC_NIOPORT; i++) - release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1); -} - -/* Reset and setup CD180 chip */ -static void __init rc_init_CD180(struct riscom_board const *bp) -{ - unsigned long flags; - - spin_lock_irqsave(&riscom_lock, flags); - - rc_out(bp, RC_CTOUT, 0); /* Clear timeout */ - rc_wait_CCR(bp); /* Wait for CCR ready */ - rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */ - spin_unlock_irqrestore(&riscom_lock, flags); - msleep(50); /* Delay 0.05 sec */ - spin_lock_irqsave(&riscom_lock, flags); - rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */ - rc_out(bp, CD180_GICR, 0); /* Clear all bits */ - rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */ - rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for tx intr */ - rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for rx intr */ - - /* Setting up prescaler. We need 4 ticks per 1 ms */ - rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8); - rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff); - - spin_unlock_irqrestore(&riscom_lock, flags); -} - -/* Main probing routine, also sets irq. */ -static int __init rc_probe(struct riscom_board *bp) -{ - unsigned char val1, val2; - int irqs = 0; - int retries; - - bp->irq = 0; - - if (rc_request_io_range(bp)) - return 1; - - /* Are the I/O ports here ? */ - rc_out(bp, CD180_PPRL, 0x5a); - outb(0xff, 0x80); - val1 = rc_in(bp, CD180_PPRL); - rc_out(bp, CD180_PPRL, 0xa5); - outb(0x00, 0x80); - val2 = rc_in(bp, CD180_PPRL); - - if ((val1 != 0x5a) || (val2 != 0xa5)) { - printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n", - board_No(bp), bp->base); - goto out_release; - } - - /* It's time to find IRQ for this board */ - for (retries = 0; retries < 5 && irqs <= 0; retries++) { - irqs = probe_irq_on(); - rc_init_CD180(bp); /* Reset CD180 chip */ - rc_out(bp, CD180_CAR, 2); /* Select port 2 */ - rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */ - rc_out(bp, CD180_IER, IER_TXRDY);/* Enable tx empty intr */ - msleep(50); - irqs = probe_irq_off(irqs); - val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */ - val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */ - rc_init_CD180(bp); /* Reset CD180 again */ - - if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX))) { - printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not " - "found.\n", board_No(bp), bp->base); - goto out_release; - } - } - - if (irqs <= 0) { - printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board " - "at 0x%03x.\n", board_No(bp), bp->base); - goto out_release; - } - bp->irq = irqs; - bp->flags |= RC_BOARD_PRESENT; - - printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at " - "0x%03x, IRQ %d.\n", - board_No(bp), - (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A', /* Board revision */ - bp->base, bp->irq); - - return 0; -out_release: - rc_release_io_range(bp); - return 1; -} - -/* - * - * Interrupt processing routines. - * - */ - -static struct riscom_port *rc_get_port(struct riscom_board const *bp, - unsigned char const *what) -{ - unsigned char channel; - struct riscom_port *port; - - channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF; - if (channel < CD180_NCH) { - port = &rc_port[board_No(bp) * RC_NPORT + channel]; - if (port->port.flags & ASYNC_INITIALIZED) - return port; - } - printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n", - board_No(bp), what, channel); - return NULL; -} - -static void rc_receive_exc(struct riscom_board const *bp) -{ - struct riscom_port *port; - struct tty_struct *tty; - unsigned char status; - unsigned char ch, flag; - - port = rc_get_port(bp, "Receive"); - if (port == NULL) - return; - - tty = tty_port_tty_get(&port->port); - -#ifdef RC_REPORT_OVERRUN - status = rc_in(bp, CD180_RCSR); - if (status & RCSR_OE) - port->overrun++; - status &= port->mark_mask; -#else - status = rc_in(bp, CD180_RCSR) & port->mark_mask; -#endif - ch = rc_in(bp, CD180_RDR); - if (!status) - goto out; - if (status & RCSR_TOUT) { - printk(KERN_WARNING "rc%d: port %d: Receiver timeout. " - "Hardware problems ?\n", - board_No(bp), port_No(port)); - goto out; - - } else if (status & RCSR_BREAK) { - printk(KERN_INFO "rc%d: port %d: Handling break...\n", - board_No(bp), port_No(port)); - flag = TTY_BREAK; - if (tty && (port->port.flags & ASYNC_SAK)) - do_SAK(tty); - - } else if (status & RCSR_PE) - flag = TTY_PARITY; - - else if (status & RCSR_FE) - flag = TTY_FRAME; - - else if (status & RCSR_OE) - flag = TTY_OVERRUN; - else - flag = TTY_NORMAL; - - if (tty) { - tty_insert_flip_char(tty, ch, flag); - tty_flip_buffer_push(tty); - } -out: - tty_kref_put(tty); -} - -static void rc_receive(struct riscom_board const *bp) -{ - struct riscom_port *port; - struct tty_struct *tty; - unsigned char count; - - port = rc_get_port(bp, "Receive"); - if (port == NULL) - return; - - tty = tty_port_tty_get(&port->port); - - count = rc_in(bp, CD180_RDCR); - -#ifdef RC_REPORT_FIFO - port->hits[count > 8 ? 9 : count]++; -#endif - - while (count--) { - u8 ch = rc_in(bp, CD180_RDR); - if (tty) - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } - if (tty) { - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } -} - -static void rc_transmit(struct riscom_board const *bp) -{ - struct riscom_port *port; - struct tty_struct *tty; - unsigned char count; - - port = rc_get_port(bp, "Transmit"); - if (port == NULL) - return; - - tty = tty_port_tty_get(&port->port); - - if (port->IER & IER_TXEMPTY) { - /* FIFO drained */ - rc_out(bp, CD180_CAR, port_No(port)); - port->IER &= ~IER_TXEMPTY; - rc_out(bp, CD180_IER, port->IER); - goto out; - } - - if ((port->xmit_cnt <= 0 && !port->break_length) - || (tty && (tty->stopped || tty->hw_stopped))) { - rc_out(bp, CD180_CAR, port_No(port)); - port->IER &= ~IER_TXRDY; - rc_out(bp, CD180_IER, port->IER); - goto out; - } - - if (port->break_length) { - if (port->break_length > 0) { - if (port->COR2 & COR2_ETC) { - rc_out(bp, CD180_TDR, CD180_C_ESC); - rc_out(bp, CD180_TDR, CD180_C_SBRK); - port->COR2 &= ~COR2_ETC; - } - count = min_t(int, port->break_length, 0xff); - rc_out(bp, CD180_TDR, CD180_C_ESC); - rc_out(bp, CD180_TDR, CD180_C_DELAY); - rc_out(bp, CD180_TDR, count); - port->break_length -= count; - if (port->break_length == 0) - port->break_length--; - } else { - rc_out(bp, CD180_TDR, CD180_C_ESC); - rc_out(bp, CD180_TDR, CD180_C_EBRK); - rc_out(bp, CD180_COR2, port->COR2); - rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_CORCHG2); - port->break_length = 0; - } - goto out; - } - - count = CD180_NFIFO; - do { - rc_out(bp, CD180_TDR, port->port.xmit_buf[port->xmit_tail++]); - port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); - if (--port->xmit_cnt <= 0) - break; - } while (--count > 0); - - if (port->xmit_cnt <= 0) { - rc_out(bp, CD180_CAR, port_No(port)); - port->IER &= ~IER_TXRDY; - rc_out(bp, CD180_IER, port->IER); - } - if (tty && port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); -out: - tty_kref_put(tty); -} - -static void rc_check_modem(struct riscom_board const *bp) -{ - struct riscom_port *port; - struct tty_struct *tty; - unsigned char mcr; - - port = rc_get_port(bp, "Modem"); - if (port == NULL) - return; - - tty = tty_port_tty_get(&port->port); - - mcr = rc_in(bp, CD180_MCR); - if (mcr & MCR_CDCHG) { - if (rc_in(bp, CD180_MSVR) & MSVR_CD) - wake_up_interruptible(&port->port.open_wait); - else if (tty) - tty_hangup(tty); - } - -#ifdef RISCOM_BRAIN_DAMAGED_CTS - if (mcr & MCR_CTSCHG) { - if (rc_in(bp, CD180_MSVR) & MSVR_CTS) { - port->IER |= IER_TXRDY; - if (tty) { - tty->hw_stopped = 0; - if (port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); - } - } else { - if (tty) - tty->hw_stopped = 1; - port->IER &= ~IER_TXRDY; - } - rc_out(bp, CD180_IER, port->IER); - } - if (mcr & MCR_DSRCHG) { - if (rc_in(bp, CD180_MSVR) & MSVR_DSR) { - port->IER |= IER_TXRDY; - if (tty) { - tty->hw_stopped = 0; - if (port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); - } - } else { - if (tty) - tty->hw_stopped = 1; - port->IER &= ~IER_TXRDY; - } - rc_out(bp, CD180_IER, port->IER); - } -#endif /* RISCOM_BRAIN_DAMAGED_CTS */ - - /* Clear change bits */ - rc_out(bp, CD180_MCR, 0); - tty_kref_put(tty); -} - -/* The main interrupt processing routine */ -static irqreturn_t rc_interrupt(int dummy, void *dev_id) -{ - unsigned char status; - unsigned char ack; - struct riscom_board *bp = dev_id; - unsigned long loop = 0; - int handled = 0; - - if (!(bp->flags & RC_BOARD_ACTIVE)) - return IRQ_NONE; - - while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) & - (RC_BSR_TOUT | RC_BSR_TINT | - RC_BSR_MINT | RC_BSR_RINT))) { - handled = 1; - if (status & RC_BSR_TOUT) - printk(KERN_WARNING "rc%d: Got timeout. Hardware " - "error?\n", board_No(bp)); - else if (status & RC_BSR_RINT) { - ack = rc_in(bp, RC_ACK_RINT); - if (ack == (RC_ID | GIVR_IT_RCV)) - rc_receive(bp); - else if (ack == (RC_ID | GIVR_IT_REXC)) - rc_receive_exc(bp); - else - printk(KERN_WARNING "rc%d: Bad receive ack " - "0x%02x.\n", - board_No(bp), ack); - } else if (status & RC_BSR_TINT) { - ack = rc_in(bp, RC_ACK_TINT); - if (ack == (RC_ID | GIVR_IT_TX)) - rc_transmit(bp); - else - printk(KERN_WARNING "rc%d: Bad transmit ack " - "0x%02x.\n", - board_No(bp), ack); - } else /* if (status & RC_BSR_MINT) */ { - ack = rc_in(bp, RC_ACK_MINT); - if (ack == (RC_ID | GIVR_IT_MODEM)) - rc_check_modem(bp); - else - printk(KERN_WARNING "rc%d: Bad modem ack " - "0x%02x.\n", - board_No(bp), ack); - } - rc_out(bp, CD180_EOIR, 0); /* Mark end of interrupt */ - rc_out(bp, RC_CTOUT, 0); /* Clear timeout flag */ - } - return IRQ_RETVAL(handled); -} - -/* - * Routines for open & close processing. - */ - -/* Called with disabled interrupts */ -static int rc_setup_board(struct riscom_board *bp) -{ - int error; - - if (bp->flags & RC_BOARD_ACTIVE) - return 0; - - error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED, - "RISCom/8", bp); - if (error) - return error; - - rc_out(bp, RC_CTOUT, 0); /* Just in case */ - bp->DTR = ~0; - rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */ - - bp->flags |= RC_BOARD_ACTIVE; - - return 0; -} - -/* Called with disabled interrupts */ -static void rc_shutdown_board(struct riscom_board *bp) -{ - if (!(bp->flags & RC_BOARD_ACTIVE)) - return; - - bp->flags &= ~RC_BOARD_ACTIVE; - - free_irq(bp->irq, NULL); - - bp->DTR = ~0; - rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */ - -} - -/* - * Setting up port characteristics. - * Must be called with disabled interrupts - */ -static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp, - struct riscom_port *port) -{ - unsigned long baud; - long tmp; - unsigned char cor1 = 0, cor3 = 0; - unsigned char mcor1 = 0, mcor2 = 0; - - port->IER = 0; - port->COR2 = 0; - port->MSVR = MSVR_RTS; - - baud = tty_get_baud_rate(tty); - - /* Select port on the board */ - rc_out(bp, CD180_CAR, port_No(port)); - - if (!baud) { - /* Drop DTR & exit */ - bp->DTR |= (1u << port_No(port)); - rc_out(bp, RC_DTR, bp->DTR); - return; - } else { - /* Set DTR on */ - bp->DTR &= ~(1u << port_No(port)); - rc_out(bp, RC_DTR, bp->DTR); - } - - /* - * Now we must calculate some speed depended things - */ - - /* Set baud rate for port */ - tmp = (((RC_OSCFREQ + baud/2) / baud + - CD180_TPC/2) / CD180_TPC); - - rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff); - rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff); - rc_out(bp, CD180_RBPRL, tmp & 0xff); - rc_out(bp, CD180_TBPRL, tmp & 0xff); - - baud = (baud + 5) / 10; /* Estimated CPS */ - - /* Two timer ticks seems enough to wakeup something like SLIP driver */ - tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; - port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? - SERIAL_XMIT_SIZE - 1 : tmp); - - /* Receiver timeout will be transmission time for 1.5 chars */ - tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud; - tmp = (tmp > 0xff) ? 0xff : tmp; - rc_out(bp, CD180_RTPR, tmp); - - switch (C_CSIZE(tty)) { - case CS5: - cor1 |= COR1_5BITS; - break; - case CS6: - cor1 |= COR1_6BITS; - break; - case CS7: - cor1 |= COR1_7BITS; - break; - case CS8: - cor1 |= COR1_8BITS; - break; - } - if (C_CSTOPB(tty)) - cor1 |= COR1_2SB; - - cor1 |= COR1_IGNORE; - if (C_PARENB(tty)) { - cor1 |= COR1_NORMPAR; - if (C_PARODD(tty)) - cor1 |= COR1_ODDP; - if (I_INPCK(tty)) - cor1 &= ~COR1_IGNORE; - } - /* Set marking of some errors */ - port->mark_mask = RCSR_OE | RCSR_TOUT; - if (I_INPCK(tty)) - port->mark_mask |= RCSR_FE | RCSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) - port->mark_mask |= RCSR_BREAK; - if (I_IGNPAR(tty)) - port->mark_mask &= ~(RCSR_FE | RCSR_PE); - if (I_IGNBRK(tty)) { - port->mark_mask &= ~RCSR_BREAK; - if (I_IGNPAR(tty)) - /* Real raw mode. Ignore all */ - port->mark_mask &= ~RCSR_OE; - } - /* Enable Hardware Flow Control */ - if (C_CRTSCTS(tty)) { -#ifdef RISCOM_BRAIN_DAMAGED_CTS - port->IER |= IER_DSR | IER_CTS; - mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; - mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; - tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & - (MSVR_CTS|MSVR_DSR)); -#else - port->COR2 |= COR2_CTSAE; -#endif - } - /* Enable Software Flow Control. FIXME: I'm not sure about this */ - /* Some people reported that it works, but I still doubt */ - if (I_IXON(tty)) { - port->COR2 |= COR2_TXIBE; - cor3 |= (COR3_FCT | COR3_SCDE); - if (I_IXANY(tty)) - port->COR2 |= COR2_IXM; - rc_out(bp, CD180_SCHR1, START_CHAR(tty)); - rc_out(bp, CD180_SCHR2, STOP_CHAR(tty)); - rc_out(bp, CD180_SCHR3, START_CHAR(tty)); - rc_out(bp, CD180_SCHR4, STOP_CHAR(tty)); - } - if (!C_CLOCAL(tty)) { - /* Enable CD check */ - port->IER |= IER_CD; - mcor1 |= MCOR1_CDZD; - mcor2 |= MCOR2_CDOD; - } - - if (C_CREAD(tty)) - /* Enable receiver */ - port->IER |= IER_RXD; - - /* Set input FIFO size (1-8 bytes) */ - cor3 |= RISCOM_RXFIFO; - /* Setting up CD180 channel registers */ - rc_out(bp, CD180_COR1, cor1); - rc_out(bp, CD180_COR2, port->COR2); - rc_out(bp, CD180_COR3, cor3); - /* Make CD180 know about registers change */ - rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); - /* Setting up modem option registers */ - rc_out(bp, CD180_MCOR1, mcor1); - rc_out(bp, CD180_MCOR2, mcor2); - /* Enable CD180 transmitter & receiver */ - rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN); - /* Enable interrupts */ - rc_out(bp, CD180_IER, port->IER); - /* And finally set RTS on */ - rc_out(bp, CD180_MSVR, port->MSVR); -} - -/* Must be called with interrupts enabled */ -static int rc_activate_port(struct tty_port *port, struct tty_struct *tty) -{ - struct riscom_port *rp = container_of(port, struct riscom_port, port); - struct riscom_board *bp = port_Board(rp); - unsigned long flags; - - if (tty_port_alloc_xmit_buf(port) < 0) - return -ENOMEM; - - spin_lock_irqsave(&riscom_lock, flags); - - clear_bit(TTY_IO_ERROR, &tty->flags); - bp->count++; - rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0; - rc_change_speed(tty, bp, rp); - spin_unlock_irqrestore(&riscom_lock, flags); - return 0; -} - -/* Must be called with interrupts disabled */ -static void rc_shutdown_port(struct tty_struct *tty, - struct riscom_board *bp, struct riscom_port *port) -{ -#ifdef RC_REPORT_OVERRUN - printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n", - board_No(bp), port_No(port), port->overrun); -#endif -#ifdef RC_REPORT_FIFO - { - int i; - - printk(KERN_INFO "rc%d: port %d: FIFO hits [ ", - board_No(bp), port_No(port)); - for (i = 0; i < 10; i++) - printk("%ld ", port->hits[i]); - printk("].\n"); - } -#endif - tty_port_free_xmit_buf(&port->port); - - /* Select port */ - rc_out(bp, CD180_CAR, port_No(port)); - /* Reset port */ - rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_SOFTRESET); - /* Disable all interrupts from this port */ - port->IER = 0; - rc_out(bp, CD180_IER, port->IER); - - set_bit(TTY_IO_ERROR, &tty->flags); - - if (--bp->count < 0) { - printk(KERN_INFO "rc%d: rc_shutdown_port: " - "bad board count: %d\n", - board_No(bp), bp->count); - bp->count = 0; - } - /* - * If this is the last opened port on the board - * shutdown whole board - */ - if (!bp->count) - rc_shutdown_board(bp); -} - -static int carrier_raised(struct tty_port *port) -{ - struct riscom_port *p = container_of(port, struct riscom_port, port); - struct riscom_board *bp = port_Board(p); - unsigned long flags; - int CD; - - spin_lock_irqsave(&riscom_lock, flags); - rc_out(bp, CD180_CAR, port_No(p)); - CD = rc_in(bp, CD180_MSVR) & MSVR_CD; - rc_out(bp, CD180_MSVR, MSVR_RTS); - bp->DTR &= ~(1u << port_No(p)); - rc_out(bp, RC_DTR, bp->DTR); - spin_unlock_irqrestore(&riscom_lock, flags); - return CD; -} - -static void dtr_rts(struct tty_port *port, int onoff) -{ - struct riscom_port *p = container_of(port, struct riscom_port, port); - struct riscom_board *bp = port_Board(p); - unsigned long flags; - - spin_lock_irqsave(&riscom_lock, flags); - bp->DTR &= ~(1u << port_No(p)); - if (onoff == 0) - bp->DTR |= (1u << port_No(p)); - rc_out(bp, RC_DTR, bp->DTR); - spin_unlock_irqrestore(&riscom_lock, flags); -} - -static int rc_open(struct tty_struct *tty, struct file *filp) -{ - int board; - int error; - struct riscom_port *port; - struct riscom_board *bp; - - board = RC_BOARD(tty->index); - if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT)) - return -ENODEV; - - bp = &rc_board[board]; - port = rc_port + board * RC_NPORT + RC_PORT(tty->index); - if (rc_paranoia_check(port, tty->name, "rc_open")) - return -ENODEV; - - error = rc_setup_board(bp); - if (error) - return error; - - tty->driver_data = port; - return tty_port_open(&port->port, tty, filp); -} - -static void rc_flush_buffer(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, "rc_flush_buffer")) - return; - - spin_lock_irqsave(&riscom_lock, flags); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore(&riscom_lock, flags); - - tty_wakeup(tty); -} - -static void rc_close_port(struct tty_port *port) -{ - unsigned long flags; - struct riscom_port *rp = container_of(port, struct riscom_port, port); - struct riscom_board *bp = port_Board(rp); - unsigned long timeout; - - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - - spin_lock_irqsave(&riscom_lock, flags); - rp->IER &= ~IER_RXD; - - rp->IER &= ~IER_TXRDY; - rp->IER |= IER_TXEMPTY; - rc_out(bp, CD180_CAR, port_No(rp)); - rc_out(bp, CD180_IER, rp->IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (rp->IER & IER_TXEMPTY) { - spin_unlock_irqrestore(&riscom_lock, flags); - msleep_interruptible(jiffies_to_msecs(rp->timeout)); - spin_lock_irqsave(&riscom_lock, flags); - if (time_after(jiffies, timeout)) - break; - } - rc_shutdown_port(port->tty, bp, rp); - spin_unlock_irqrestore(&riscom_lock, flags); -} - -static void rc_close(struct tty_struct *tty, struct file *filp) -{ - struct riscom_port *port = tty->driver_data; - - if (!port || rc_paranoia_check(port, tty->name, "close")) - return; - tty_port_close(&port->port, tty, filp); -} - -static int rc_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct riscom_port *port = tty->driver_data; - struct riscom_board *bp; - int c, total = 0; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, "rc_write")) - return 0; - - bp = port_Board(port); - - while (1) { - spin_lock_irqsave(&riscom_lock, flags); - - c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, - SERIAL_XMIT_SIZE - port->xmit_head)); - if (c <= 0) - break; /* lock continues to be held */ - - memcpy(port->port.xmit_buf + port->xmit_head, buf, c); - port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - port->xmit_cnt += c; - - spin_unlock_irqrestore(&riscom_lock, flags); - - buf += c; - count -= c; - total += c; - } - - if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && - !(port->IER & IER_TXRDY)) { - port->IER |= IER_TXRDY; - rc_out(bp, CD180_CAR, port_No(port)); - rc_out(bp, CD180_IER, port->IER); - } - - spin_unlock_irqrestore(&riscom_lock, flags); - - return total; -} - -static int rc_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct riscom_port *port = tty->driver_data; - unsigned long flags; - int ret = 0; - - if (rc_paranoia_check(port, tty->name, "rc_put_char")) - return 0; - - spin_lock_irqsave(&riscom_lock, flags); - - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) - goto out; - - port->port.xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= SERIAL_XMIT_SIZE - 1; - port->xmit_cnt++; - ret = 1; - -out: - spin_unlock_irqrestore(&riscom_lock, flags); - return ret; -} - -static void rc_flush_chars(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, "rc_flush_chars")) - return; - - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped) - return; - - spin_lock_irqsave(&riscom_lock, flags); - - port->IER |= IER_TXRDY; - rc_out(port_Board(port), CD180_CAR, port_No(port)); - rc_out(port_Board(port), CD180_IER, port->IER); - - spin_unlock_irqrestore(&riscom_lock, flags); -} - -static int rc_write_room(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - int ret; - - if (rc_paranoia_check(port, tty->name, "rc_write_room")) - return 0; - - ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} - -static int rc_chars_in_buffer(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - - if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer")) - return 0; - - return port->xmit_cnt; -} - -static int rc_tiocmget(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - struct riscom_board *bp; - unsigned char status; - unsigned int result; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, __func__)) - return -ENODEV; - - bp = port_Board(port); - - spin_lock_irqsave(&riscom_lock, flags); - - rc_out(bp, CD180_CAR, port_No(port)); - status = rc_in(bp, CD180_MSVR); - result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG; - - spin_unlock_irqrestore(&riscom_lock, flags); - - result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0) - | ((status & MSVR_DTR) ? TIOCM_DTR : 0) - | ((status & MSVR_CD) ? TIOCM_CAR : 0) - | ((status & MSVR_DSR) ? TIOCM_DSR : 0) - | ((status & MSVR_CTS) ? TIOCM_CTS : 0); - return result; -} - -static int rc_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct riscom_port *port = tty->driver_data; - unsigned long flags; - struct riscom_board *bp; - - if (rc_paranoia_check(port, tty->name, __func__)) - return -ENODEV; - - bp = port_Board(port); - - spin_lock_irqsave(&riscom_lock, flags); - - if (set & TIOCM_RTS) - port->MSVR |= MSVR_RTS; - if (set & TIOCM_DTR) - bp->DTR &= ~(1u << port_No(port)); - - if (clear & TIOCM_RTS) - port->MSVR &= ~MSVR_RTS; - if (clear & TIOCM_DTR) - bp->DTR |= (1u << port_No(port)); - - rc_out(bp, CD180_CAR, port_No(port)); - rc_out(bp, CD180_MSVR, port->MSVR); - rc_out(bp, RC_DTR, bp->DTR); - - spin_unlock_irqrestore(&riscom_lock, flags); - - return 0; -} - -static int rc_send_break(struct tty_struct *tty, int length) -{ - struct riscom_port *port = tty->driver_data; - struct riscom_board *bp = port_Board(port); - unsigned long flags; - - if (length == 0 || length == -1) - return -EOPNOTSUPP; - - spin_lock_irqsave(&riscom_lock, flags); - - port->break_length = RISCOM_TPS / HZ * length; - port->COR2 |= COR2_ETC; - port->IER |= IER_TXRDY; - rc_out(bp, CD180_CAR, port_No(port)); - rc_out(bp, CD180_COR2, port->COR2); - rc_out(bp, CD180_IER, port->IER); - rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_CORCHG2); - rc_wait_CCR(bp); - - spin_unlock_irqrestore(&riscom_lock, flags); - return 0; -} - -static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port, - struct serial_struct __user *newinfo) -{ - struct serial_struct tmp; - struct riscom_board *bp = port_Board(port); - int change_speed; - - if (copy_from_user(&tmp, newinfo, sizeof(tmp))) - return -EFAULT; - - mutex_lock(&port->port.mutex); - change_speed = ((port->port.flags & ASYNC_SPD_MASK) != - (tmp.flags & ASYNC_SPD_MASK)); - - if (!capable(CAP_SYS_ADMIN)) { - if ((tmp.close_delay != port->port.close_delay) || - (tmp.closing_wait != port->port.closing_wait) || - ((tmp.flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) { - mutex_unlock(&port->port.mutex); - return -EPERM; - } - port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | - (tmp.flags & ASYNC_USR_MASK)); - } else { - port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | - (tmp.flags & ASYNC_FLAGS)); - port->port.close_delay = tmp.close_delay; - port->port.closing_wait = tmp.closing_wait; - } - if (change_speed) { - unsigned long flags; - - spin_lock_irqsave(&riscom_lock, flags); - rc_change_speed(tty, bp, port); - spin_unlock_irqrestore(&riscom_lock, flags); - } - mutex_unlock(&port->port.mutex); - return 0; -} - -static int rc_get_serial_info(struct riscom_port *port, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - struct riscom_board *bp = port_Board(port); - - memset(&tmp, 0, sizeof(tmp)); - tmp.type = PORT_CIRRUS; - tmp.line = port - rc_port; - - mutex_lock(&port->port.mutex); - tmp.port = bp->base; - tmp.irq = bp->irq; - tmp.flags = port->port.flags; - tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC; - tmp.close_delay = port->port.close_delay * HZ/100; - tmp.closing_wait = port->port.closing_wait * HZ/100; - mutex_unlock(&port->port.mutex); - tmp.xmit_fifo_size = CD180_NFIFO; - return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0; -} - -static int rc_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct riscom_port *port = tty->driver_data; - void __user *argp = (void __user *)arg; - int retval; - - if (rc_paranoia_check(port, tty->name, "rc_ioctl")) - return -ENODEV; - - switch (cmd) { - case TIOCGSERIAL: - retval = rc_get_serial_info(port, argp); - break; - case TIOCSSERIAL: - retval = rc_set_serial_info(tty, port, argp); - break; - default: - retval = -ENOIOCTLCMD; - } - return retval; -} - -static void rc_throttle(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - struct riscom_board *bp; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, "rc_throttle")) - return; - bp = port_Board(port); - - spin_lock_irqsave(&riscom_lock, flags); - port->MSVR &= ~MSVR_RTS; - rc_out(bp, CD180_CAR, port_No(port)); - if (I_IXOFF(tty)) { - rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_SSCH2); - rc_wait_CCR(bp); - } - rc_out(bp, CD180_MSVR, port->MSVR); - spin_unlock_irqrestore(&riscom_lock, flags); -} - -static void rc_unthrottle(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - struct riscom_board *bp; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, "rc_unthrottle")) - return; - bp = port_Board(port); - - spin_lock_irqsave(&riscom_lock, flags); - port->MSVR |= MSVR_RTS; - rc_out(bp, CD180_CAR, port_No(port)); - if (I_IXOFF(tty)) { - rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_SSCH1); - rc_wait_CCR(bp); - } - rc_out(bp, CD180_MSVR, port->MSVR); - spin_unlock_irqrestore(&riscom_lock, flags); -} - -static void rc_stop(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - struct riscom_board *bp; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, "rc_stop")) - return; - - bp = port_Board(port); - - spin_lock_irqsave(&riscom_lock, flags); - port->IER &= ~IER_TXRDY; - rc_out(bp, CD180_CAR, port_No(port)); - rc_out(bp, CD180_IER, port->IER); - spin_unlock_irqrestore(&riscom_lock, flags); -} - -static void rc_start(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - struct riscom_board *bp; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, "rc_start")) - return; - - bp = port_Board(port); - - spin_lock_irqsave(&riscom_lock, flags); - - if (port->xmit_cnt && port->port.xmit_buf && !(port->IER & IER_TXRDY)) { - port->IER |= IER_TXRDY; - rc_out(bp, CD180_CAR, port_No(port)); - rc_out(bp, CD180_IER, port->IER); - } - spin_unlock_irqrestore(&riscom_lock, flags); -} - -static void rc_hangup(struct tty_struct *tty) -{ - struct riscom_port *port = tty->driver_data; - - if (rc_paranoia_check(port, tty->name, "rc_hangup")) - return; - - tty_port_hangup(&port->port); -} - -static void rc_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct riscom_port *port = tty->driver_data; - unsigned long flags; - - if (rc_paranoia_check(port, tty->name, "rc_set_termios")) - return; - - spin_lock_irqsave(&riscom_lock, flags); - rc_change_speed(tty, port_Board(port), port); - spin_unlock_irqrestore(&riscom_lock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rc_start(tty); - } -} - -static const struct tty_operations riscom_ops = { - .open = rc_open, - .close = rc_close, - .write = rc_write, - .put_char = rc_put_char, - .flush_chars = rc_flush_chars, - .write_room = rc_write_room, - .chars_in_buffer = rc_chars_in_buffer, - .flush_buffer = rc_flush_buffer, - .ioctl = rc_ioctl, - .throttle = rc_throttle, - .unthrottle = rc_unthrottle, - .set_termios = rc_set_termios, - .stop = rc_stop, - .start = rc_start, - .hangup = rc_hangup, - .tiocmget = rc_tiocmget, - .tiocmset = rc_tiocmset, - .break_ctl = rc_send_break, -}; - -static const struct tty_port_operations riscom_port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, - .shutdown = rc_close_port, - .activate = rc_activate_port, -}; - - -static int __init rc_init_drivers(void) -{ - int error; - int i; - - riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT); - if (!riscom_driver) - return -ENOMEM; - - riscom_driver->owner = THIS_MODULE; - riscom_driver->name = "ttyL"; - riscom_driver->major = RISCOM8_NORMAL_MAJOR; - riscom_driver->type = TTY_DRIVER_TYPE_SERIAL; - riscom_driver->subtype = SERIAL_TYPE_NORMAL; - riscom_driver->init_termios = tty_std_termios; - riscom_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - riscom_driver->init_termios.c_ispeed = 9600; - riscom_driver->init_termios.c_ospeed = 9600; - riscom_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK; - tty_set_operations(riscom_driver, &riscom_ops); - error = tty_register_driver(riscom_driver); - if (error != 0) { - put_tty_driver(riscom_driver); - printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, " - "error = %d\n", error); - return 1; - } - memset(rc_port, 0, sizeof(rc_port)); - for (i = 0; i < RC_NPORT * RC_NBOARD; i++) { - tty_port_init(&rc_port[i].port); - rc_port[i].port.ops = &riscom_port_ops; - rc_port[i].magic = RISCOM8_MAGIC; - } - return 0; -} - -static void rc_release_drivers(void) -{ - tty_unregister_driver(riscom_driver); - put_tty_driver(riscom_driver); -} - -#ifndef MODULE -/* - * Called at boot time. - * - * You can specify IO base for up to RC_NBOARD cards, - * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt. - * Note that there will be no probing at default - * addresses in this case. - * - */ -static int __init riscom8_setup(char *str) -{ - int ints[RC_NBOARD]; - int i; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - for (i = 0; i < RC_NBOARD; i++) { - if (i < ints[0]) - rc_board[i].base = ints[i+1]; - else - rc_board[i].base = 0; - } - return 1; -} - -__setup("riscom8=", riscom8_setup); -#endif - -static char banner[] __initdata = - KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin " - "1994-1996.\n"; -static char no_boards_msg[] __initdata = - KERN_INFO "rc: No RISCom/8 boards detected.\n"; - -/* - * This routine must be called by kernel at boot time - */ -static int __init riscom8_init(void) -{ - int i; - int found = 0; - - printk(banner); - - if (rc_init_drivers()) - return -EIO; - - for (i = 0; i < RC_NBOARD; i++) - if (rc_board[i].base && !rc_probe(&rc_board[i])) - found++; - if (!found) { - rc_release_drivers(); - printk(no_boards_msg); - return -EIO; - } - return 0; -} - -#ifdef MODULE -static int iobase; -static int iobase1; -static int iobase2; -static int iobase3; -module_param(iobase, int, 0); -module_param(iobase1, int, 0); -module_param(iobase2, int, 0); -module_param(iobase3, int, 0); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(RISCOM8_NORMAL_MAJOR); -#endif /* MODULE */ - -/* - * You can setup up to 4 boards (current value of RC_NBOARD) - * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter. - * - */ -static int __init riscom8_init_module(void) -{ -#ifdef MODULE - int i; - - if (iobase || iobase1 || iobase2 || iobase3) { - for (i = 0; i < RC_NBOARD; i++) - rc_board[i].base = 0; - } - - if (iobase) - rc_board[0].base = iobase; - if (iobase1) - rc_board[1].base = iobase1; - if (iobase2) - rc_board[2].base = iobase2; - if (iobase3) - rc_board[3].base = iobase3; -#endif /* MODULE */ - - return riscom8_init(); -} - -static void __exit riscom8_exit_module(void) -{ - int i; - - rc_release_drivers(); - for (i = 0; i < RC_NBOARD; i++) - if (rc_board[i].flags & RC_BOARD_PRESENT) - rc_release_io_range(&rc_board[i]); - -} - -module_init(riscom8_init_module); -module_exit(riscom8_exit_module); diff --git a/drivers/char/riscom8.h b/drivers/char/riscom8.h deleted file mode 100644 index c9876b3f9714..000000000000 --- a/drivers/char/riscom8.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * linux/drivers/char/riscom8.h -- RISCom/8 multiport serial driver. - * - * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) - * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. The RISCom/8 card - * programming info was obtained from various drivers for other OSes - * (FreeBSD, ISC, etc), but no source code from those drivers were - * directly included in this driver. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __LINUX_RISCOM8_H -#define __LINUX_RISCOM8_H - -#include - -#ifdef __KERNEL__ - -#define RC_NBOARD 4 -/* NOTE: RISCom decoder recognizes 16 addresses... */ -#define RC_NPORT 8 -#define RC_BOARD(line) (((line) >> 3) & 0x07) -#define RC_PORT(line) ((line) & (RC_NPORT - 1)) - -/* Ticks per sec. Used for setting receiver timeout and break length */ -#define RISCOM_TPS 4000 - -/* Yeah, after heavy testing I decided it must be 6. - * Sure, You can change it if needed. - */ -#define RISCOM_RXFIFO 6 /* Max. receiver FIFO size (1-8) */ - -#define RISCOM8_MAGIC 0x0907 - -#define RC_IOBASE1 0x220 -#define RC_IOBASE2 0x240 -#define RC_IOBASE3 0x250 -#define RC_IOBASE4 0x260 - -struct riscom_board { - unsigned long flags; - unsigned short base; - unsigned char irq; - signed char count; - unsigned char DTR; -}; - -#define RC_BOARD_PRESENT 0x00000001 -#define RC_BOARD_ACTIVE 0x00000002 - -struct riscom_port { - int magic; - struct tty_port port; - int baud_base; - int timeout; - int custom_divisor; - int xmit_head; - int xmit_tail; - int xmit_cnt; - short wakeup_chars; - short break_length; - unsigned char mark_mask; - unsigned char IER; - unsigned char MSVR; - unsigned char COR2; -#ifdef RC_REPORT_OVERRUN - unsigned long overrun; -#endif -#ifdef RC_REPORT_FIFO - unsigned long hits[10]; -#endif -}; - -#endif /* __KERNEL__ */ -#endif /* __LINUX_RISCOM8_H */ diff --git a/drivers/char/riscom8_reg.h b/drivers/char/riscom8_reg.h deleted file mode 100644 index a32475ed0d18..000000000000 --- a/drivers/char/riscom8_reg.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - * linux/drivers/char/riscom8_reg.h -- RISCom/8 multiport serial driver. - */ - -/* - * Definitions for RISCom/8 Async Mux card by SDL Communications, Inc. - */ - -/* - * Address mapping between Cirrus Logic CD180 chip internal registers - * and ISA port addresses: - * - * CL-CD180 A6 A5 A4 A3 A2 A1 A0 - * ISA A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 - */ -#define RC_TO_ISA(r) ((((r)&0x07)<<1) | (((r)&~0x07)<<7)) - - -/* RISCom/8 On-Board Registers (assuming address translation) */ - -#define RC_RI 0x100 /* Ring Indicator Register (R/O) */ -#define RC_DTR 0x100 /* DTR Register (W/O) */ -#define RC_BSR 0x101 /* Board Status Register (R/O) */ -#define RC_CTOUT 0x101 /* Clear Timeout (W/O) */ - - -/* Board Status Register */ - -#define RC_BSR_TOUT 0x08 /* Hardware Timeout */ -#define RC_BSR_RINT 0x04 /* Receiver Interrupt */ -#define RC_BSR_TINT 0x02 /* Transmitter Interrupt */ -#define RC_BSR_MINT 0x01 /* Modem Ctl Interrupt */ - - -/* On-board oscillator frequency (in Hz) */ -#define RC_OSCFREQ 9830400 - -/* Values of choice for Interrupt ACKs */ -#define RC_ACK_MINT 0x81 /* goes to PILR1 */ -#define RC_ACK_RINT 0x82 /* goes to PILR3 */ -#define RC_ACK_TINT 0x84 /* goes to PILR2 */ - -/* Chip ID (sorry, only one chip now) */ -#define RC_ID 0x10 - -/* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */ - -#define CD180_NCH 8 /* Total number of channels */ -#define CD180_TPC 16 /* Ticks per character */ -#define CD180_NFIFO 8 /* TX FIFO size */ - - -/* Global registers */ - -#define CD180_GIVR 0x40 /* Global Interrupt Vector Register */ -#define CD180_GICR 0x41 /* Global Interrupting Channel Register */ -#define CD180_PILR1 0x61 /* Priority Interrupt Level Register 1 */ -#define CD180_PILR2 0x62 /* Priority Interrupt Level Register 2 */ -#define CD180_PILR3 0x63 /* Priority Interrupt Level Register 3 */ -#define CD180_CAR 0x64 /* Channel Access Register */ -#define CD180_GFRCR 0x6b /* Global Firmware Revision Code Register */ -#define CD180_PPRH 0x70 /* Prescaler Period Register High */ -#define CD180_PPRL 0x71 /* Prescaler Period Register Low */ -#define CD180_RDR 0x78 /* Receiver Data Register */ -#define CD180_RCSR 0x7a /* Receiver Character Status Register */ -#define CD180_TDR 0x7b /* Transmit Data Register */ -#define CD180_EOIR 0x7f /* End of Interrupt Register */ - - -/* Channel Registers */ - -#define CD180_CCR 0x01 /* Channel Command Register */ -#define CD180_IER 0x02 /* Interrupt Enable Register */ -#define CD180_COR1 0x03 /* Channel Option Register 1 */ -#define CD180_COR2 0x04 /* Channel Option Register 2 */ -#define CD180_COR3 0x05 /* Channel Option Register 3 */ -#define CD180_CCSR 0x06 /* Channel Control Status Register */ -#define CD180_RDCR 0x07 /* Receive Data Count Register */ -#define CD180_SCHR1 0x09 /* Special Character Register 1 */ -#define CD180_SCHR2 0x0a /* Special Character Register 2 */ -#define CD180_SCHR3 0x0b /* Special Character Register 3 */ -#define CD180_SCHR4 0x0c /* Special Character Register 4 */ -#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */ -#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */ -#define CD180_MCR 0x12 /* Modem Change Register */ -#define CD180_RTPR 0x18 /* Receive Timeout Period Register */ -#define CD180_MSVR 0x28 /* Modem Signal Value Register */ -#define CD180_RBPRH 0x31 /* Receive Baud Rate Period Register High */ -#define CD180_RBPRL 0x32 /* Receive Baud Rate Period Register Low */ -#define CD180_TBPRH 0x39 /* Transmit Baud Rate Period Register High */ -#define CD180_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */ - - -/* Global Interrupt Vector Register (R/W) */ - -#define GIVR_ITMASK 0x07 /* Interrupt type mask */ -#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */ -#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */ -#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */ -#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */ - - -/* Global Interrupt Channel Register (R/W) */ - -#define GICR_CHAN 0x1c /* Channel Number Mask */ -#define GICR_CHAN_OFF 2 /* Channel Number Offset */ - - -/* Channel Address Register (R/W) */ - -#define CAR_CHAN 0x07 /* Channel Number Mask */ -#define CAR_A7 0x08 /* A7 Address Extension (unused) */ - - -/* Receive Character Status Register (R/O) */ - -#define RCSR_TOUT 0x80 /* Rx Timeout */ -#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ -#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ -#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ -#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ -#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ -#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ -#define RCSR_BREAK 0x08 /* Break has been detected */ -#define RCSR_PE 0x04 /* Parity Error */ -#define RCSR_FE 0x02 /* Frame Error */ -#define RCSR_OE 0x01 /* Overrun Error */ - - -/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ - -#define CCR_HARDRESET 0x81 /* Reset the chip */ - -#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ - -#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ -#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ -#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ - -#define CCR_SSCH1 0x21 /* Send Special Character 1 */ - -#define CCR_SSCH2 0x22 /* Send Special Character 2 */ - -#define CCR_SSCH3 0x23 /* Send Special Character 3 */ - -#define CCR_SSCH4 0x24 /* Send Special Character 4 */ - -#define CCR_TXEN 0x18 /* Enable Transmitter */ -#define CCR_RXEN 0x12 /* Enable Receiver */ - -#define CCR_TXDIS 0x14 /* Disable Transmitter */ -#define CCR_RXDIS 0x11 /* Disable Receiver */ - - -/* Interrupt Enable Register (R/W) */ - -#define IER_DSR 0x80 /* Enable interrupt on DSR change */ -#define IER_CD 0x40 /* Enable interrupt on CD change */ -#define IER_CTS 0x20 /* Enable interrupt on CTS change */ -#define IER_RXD 0x10 /* Enable interrupt on Receive Data */ -#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ -#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ -#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ -#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ - - -/* Channel Option Register 1 (R/W) */ - -#define COR1_ODDP 0x80 /* Odd Parity */ -#define COR1_PARMODE 0x60 /* Parity Mode mask */ -#define COR1_NOPAR 0x00 /* No Parity */ -#define COR1_FORCEPAR 0x20 /* Force Parity */ -#define COR1_NORMPAR 0x40 /* Normal Parity */ -#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ -#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ -#define COR1_1SB 0x00 /* 1 Stop Bit */ -#define COR1_15SB 0x04 /* 1.5 Stop Bits */ -#define COR1_2SB 0x08 /* 2 Stop Bits */ -#define COR1_CHARLEN 0x03 /* Character Length */ -#define COR1_5BITS 0x00 /* 5 bits */ -#define COR1_6BITS 0x01 /* 6 bits */ -#define COR1_7BITS 0x02 /* 7 bits */ -#define COR1_8BITS 0x03 /* 8 bits */ - - -/* Channel Option Register 2 (R/W) */ - -#define COR2_IXM 0x80 /* Implied XON mode */ -#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ -#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ -#define COR2_LLM 0x10 /* Local Loopback Mode */ -#define COR2_RLM 0x08 /* Remote Loopback Mode */ -#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ -#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ -#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ - - -/* Channel Option Register 3 (R/W) */ - -#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ -#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ -#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ -#define COR3_SCDE 0x10 /* Special Character Detection Enable */ -#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ - - -/* Channel Control Status Register (R/O) */ - -#define CCSR_RXEN 0x80 /* Receiver Enabled */ -#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ -#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ -#define CCSR_TXEN 0x08 /* Transmitter Enabled */ -#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ -#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ - - -/* Modem Change Option Register 1 (R/W) */ - -#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ -#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ -#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ -#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ -#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ - - -/* Modem Change Option Register 2 (R/W) */ - -#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ -#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ -#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ - - -/* Modem Change Register (R/W) */ - -#define MCR_DSRCHG 0x80 /* DSR Changed */ -#define MCR_CDCHG 0x40 /* CD Changed */ -#define MCR_CTSCHG 0x20 /* CTS Changed */ - - -/* Modem Signal Value Register (R/W) */ - -#define MSVR_DSR 0x80 /* Current state of DSR input */ -#define MSVR_CD 0x40 /* Current state of CD input */ -#define MSVR_CTS 0x20 /* Current state of CTS input */ -#define MSVR_DTR 0x02 /* Current state of DTR output */ -#define MSVR_RTS 0x01 /* Current state of RTS output */ - - -/* Escape characters */ - -#define CD180_C_ESC 0x00 /* Escape character */ -#define CD180_C_SBRK 0x81 /* Start sending BREAK */ -#define CD180_C_DELAY 0x82 /* Delay output */ -#define CD180_C_EBRK 0x83 /* Stop sending BREAK */ diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c deleted file mode 100644 index 674af6933978..000000000000 --- a/drivers/char/serial167.c +++ /dev/null @@ -1,2489 +0,0 @@ -/* - * linux/drivers/char/serial167.c - * - * Driver for MVME166/7 board serial ports, which are via a CD2401. - * Based very much on cyclades.c. - * - * MVME166/7 work by Richard Hirst [richard@sleepie.demon.co.uk] - * - * ============================================================== - * - * static char rcsid[] = - * "$Revision: 1.36.1.4 $$Date: 1995/03/29 06:14:14 $"; - * - * linux/kernel/cyclades.c - * - * Maintained by Marcio Saito (cyclades@netcom.com) and - * Randolph Bentson (bentson@grieg.seaslug.org) - * - * Much of the design and some of the code came from serial.c - * which was copyright (C) 1991, 1992 Linus Torvalds. It was - * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, - * and then fixed as suggested by Michael K. Johnson 12/12/92. - * - * This version does not support shared irq's. - * - * $Log: cyclades.c,v $ - * Revision 1.36.1.4 1995/03/29 06:14:14 bentson - * disambiguate between Cyclom-16Y and Cyclom-32Ye; - * - * Changes: - * - * 200 lines of changes record removed - RGH 11-10-95, starting work on - * converting this to drive serial ports on mvme166 (cd2401). - * - * Arnaldo Carvalho de Melo - 2000/08/25 - * - get rid of verify_area - * - use get_user to access memory from userspace in set_threshold, - * set_default_threshold and set_timeout - * - don't use the panic function in serial167_init - * - do resource release on failure on serial167_init - * - include missing restore_flags in mvme167_serial_console_setup - * - * Kars de Jong - 2004/09/06 - * - replace bottom half handler with task queue handler - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#define SERIAL_PARANOIA_CHECK -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_THROTTLE -#undef SERIAL_DEBUG_OTHER -#undef SERIAL_DEBUG_IO -#undef SERIAL_DEBUG_COUNT -#undef SERIAL_DEBUG_DTR -#undef CYCLOM_16Y_HACK -#define CYCLOM_ENABLE_MONITORING - -#define WAKEUP_CHARS 256 - -#define STD_COM_FLAGS (0) - -static struct tty_driver *cy_serial_driver; -extern int serial_console; -static struct cyclades_port *serial_console_info = NULL; -static unsigned int serial_console_cflag = 0; -u_char initial_console_speed; - -/* Base address of cd2401 chip on mvme166/7 */ - -#define BASE_ADDR (0xfff45000) -#define pcc2chip ((volatile u_char *)0xfff42000) -#define PccSCCMICR 0x1d -#define PccSCCTICR 0x1e -#define PccSCCRICR 0x1f -#define PccTPIACKR 0x25 -#define PccRPIACKR 0x27 -#define PccIMLR 0x3f - -/* This is the per-port data structure */ -struct cyclades_port cy_port[] = { - /* CARD# */ - {-1}, /* ttyS0 */ - {-1}, /* ttyS1 */ - {-1}, /* ttyS2 */ - {-1}, /* ttyS3 */ -}; - -#define NR_PORTS ARRAY_SIZE(cy_port) - -/* - * This is used to look up the divisor speeds and the timeouts - * We're normally limited to 15 distinct baud rates. The extra - * are accessed via settings in info->flags. - * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, - * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, - * HI VHI - */ -static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, - 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, - 0 -}; - -#if 0 -static char baud_co[] = { /* 25 MHz clock option table */ - /* value => 00 01 02 03 04 */ - /* divide by 8 32 128 512 2048 */ - 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, - 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static char baud_bpr[] = { /* 25 MHz baud rate period table */ - 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, - 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 -}; -#endif - -/* I think 166 brd clocks 2401 at 20MHz.... */ - -/* These values are written directly to tcor, and >> 5 for writing to rcor */ -static u_char baud_co[] = { /* 20 MHz clock option table */ - 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40, - 0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -/* These values written directly to tbpr/rbpr */ -static u_char baud_bpr[] = { /* 20 MHz baud rate period table */ - 0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81, - 0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10 -}; - -static u_char baud_cor4[] = { /* receive threshold */ - 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07 -}; - -static void shutdown(struct cyclades_port *); -static int startup(struct cyclades_port *); -static void cy_throttle(struct tty_struct *); -static void cy_unthrottle(struct tty_struct *); -static void config_setup(struct cyclades_port *); -#ifdef CYCLOM_SHOW_STATUS -static void show_status(int); -#endif - -/* - * I have my own version of udelay(), as it is needed when initialising - * the chip, before the delay loop has been calibrated. Should probably - * reference one of the vmechip2 or pccchip2 counter for an accurate - * delay, but this wild guess will do for now. - */ - -void my_udelay(long us) -{ - u_char x; - volatile u_char *p = &x; - int i; - - while (us--) - for (i = 100; i; i--) - x |= *p; -} - -static inline int serial_paranoia_check(struct cyclades_port *info, char *name, - const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - if (!info) { - printk("Warning: null cyclades_port for (%s) in %s\n", name, - routine); - return 1; - } - - if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) { - printk("Warning: cyclades_port out of range for (%s) in %s\n", - name, routine); - return 1; - } - - if (info->magic != CYCLADES_MAGIC) { - printk("Warning: bad magic number for serial struct (%s) in " - "%s\n", name, routine); - return 1; - } -#endif - return 0; -} /* serial_paranoia_check */ - -#if 0 -/* The following diagnostic routines allow the driver to spew - information on the screen, even (especially!) during interrupts. - */ -void SP(char *data) -{ - unsigned long flags; - local_irq_save(flags); - printk(KERN_EMERG "%s", data); - local_irq_restore(flags); -} - -char scrn[2]; -void CP(char data) -{ - unsigned long flags; - local_irq_save(flags); - scrn[0] = data; - printk(KERN_EMERG "%c", scrn); - local_irq_restore(flags); -} /* CP */ - -void CP1(int data) -{ - (data < 10) ? CP(data + '0') : CP(data + 'A' - 10); -} /* CP1 */ -void CP2(int data) -{ - CP1((data >> 4) & 0x0f); - CP1(data & 0x0f); -} /* CP2 */ -void CP4(int data) -{ - CP2((data >> 8) & 0xff); - CP2(data & 0xff); -} /* CP4 */ -void CP8(long data) -{ - CP4((data >> 16) & 0xffff); - CP4(data & 0xffff); -} /* CP8 */ -#endif - -/* This routine waits up to 1000 micro-seconds for the previous - command to the Cirrus chip to complete and then issues the - new command. An error is returned if the previous command - didn't finish within the time limit. - */ -u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd) -{ - unsigned long flags; - volatile int i; - - local_irq_save(flags); - /* Check to see that the previous command has completed */ - for (i = 0; i < 100; i++) { - if (base_addr[CyCCR] == 0) { - break; - } - my_udelay(10L); - } - /* if the CCR never cleared, the previous command - didn't finish within the "reasonable time" */ - if (i == 10) { - local_irq_restore(flags); - return (-1); - } - - /* Issue the new command */ - base_addr[CyCCR] = cmd; - local_irq_restore(flags); - return (0); -} /* write_cy_cmd */ - -/* cy_start and cy_stop provide software output flow control as a - function of XON/XOFF, software CTS, and other such stuff. */ - -static void cy_stop(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - unsigned long flags; - -#ifdef SERIAL_DEBUG_OTHER - printk("cy_stop %s\n", tty->name); /* */ -#endif - - if (serial_paranoia_check(info, tty->name, "cy_stop")) - return; - - channel = info->line; - - local_irq_save(flags); - base_addr[CyCAR] = (u_char) (channel); /* index channel */ - base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); - local_irq_restore(flags); -} /* cy_stop */ - -static void cy_start(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - unsigned long flags; - -#ifdef SERIAL_DEBUG_OTHER - printk("cy_start %s\n", tty->name); /* */ -#endif - - if (serial_paranoia_check(info, tty->name, "cy_start")) - return; - - channel = info->line; - - local_irq_save(flags); - base_addr[CyCAR] = (u_char) (channel); - base_addr[CyIER] |= CyTxMpty; - local_irq_restore(flags); -} /* cy_start */ - -/* The real interrupt service routines are called - whenever the card wants its hand held--chars - received, out buffer empty, modem change, etc. - */ -static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) -{ - struct tty_struct *tty; - struct cyclades_port *info; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - unsigned char err, rfoc; - int channel; - char data; - - /* determine the channel and change to that context */ - channel = (u_short) (base_addr[CyLICR] >> 2); - info = &cy_port[channel]; - info->last_active = jiffies; - - if ((err = base_addr[CyRISR]) & CyTIMEOUT) { - /* This is a receive timeout interrupt, ignore it */ - base_addr[CyREOIR] = CyNOTRANS; - return IRQ_HANDLED; - } - - /* Read a byte of data if there is any - assume the error - * is associated with this character */ - - if ((rfoc = base_addr[CyRFOC]) != 0) - data = base_addr[CyRDR]; - else - data = 0; - - /* if there is nowhere to put the data, discard it */ - if (info->tty == 0) { - base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; - return IRQ_HANDLED; - } else { /* there is an open port for this data */ - tty = info->tty; - if (err & info->ignore_status_mask) { - base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; - return IRQ_HANDLED; - } - if (tty_buffer_request_room(tty, 1) != 0) { - if (err & info->read_status_mask) { - if (err & CyBREAK) { - tty_insert_flip_char(tty, data, - TTY_BREAK); - if (info->flags & ASYNC_SAK) { - do_SAK(tty); - } - } else if (err & CyFRAME) { - tty_insert_flip_char(tty, data, - TTY_FRAME); - } else if (err & CyPARITY) { - tty_insert_flip_char(tty, data, - TTY_PARITY); - } else if (err & CyOVERRUN) { - tty_insert_flip_char(tty, 0, - TTY_OVERRUN); - /* - If the flip buffer itself is - overflowing, we still lose - the next incoming character. - */ - if (tty_buffer_request_room(tty, 1) != - 0) { - tty_insert_flip_char(tty, data, - TTY_FRAME); - } - /* These two conditions may imply */ - /* a normal read should be done. */ - /* else if(data & CyTIMEOUT) */ - /* else if(data & CySPECHAR) */ - } else { - tty_insert_flip_char(tty, 0, - TTY_NORMAL); - } - } else { - tty_insert_flip_char(tty, data, TTY_NORMAL); - } - } else { - /* there was a software buffer overrun - and nothing could be done about it!!! */ - } - } - tty_schedule_flip(tty); - /* end of service */ - base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; - return IRQ_HANDLED; -} /* cy_rxerr_interrupt */ - -static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id) -{ - struct cyclades_port *info; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - int mdm_change; - int mdm_status; - - /* determine the channel and change to that context */ - channel = (u_short) (base_addr[CyLICR] >> 2); - info = &cy_port[channel]; - info->last_active = jiffies; - - mdm_change = base_addr[CyMISR]; - mdm_status = base_addr[CyMSVR1]; - - if (info->tty == 0) { /* nowhere to put the data, ignore it */ - ; - } else { - if ((mdm_change & CyDCD) - && (info->flags & ASYNC_CHECK_CD)) { - if (mdm_status & CyDCD) { -/* CP('!'); */ - wake_up_interruptible(&info->open_wait); - } else { -/* CP('@'); */ - tty_hangup(info->tty); - wake_up_interruptible(&info->open_wait); - info->flags &= ~ASYNC_NORMAL_ACTIVE; - } - } - if ((mdm_change & CyCTS) - && (info->flags & ASYNC_CTS_FLOW)) { - if (info->tty->stopped) { - if (mdm_status & CyCTS) { - /* !!! cy_start isn't used because... */ - info->tty->stopped = 0; - base_addr[CyIER] |= CyTxMpty; - tty_wakeup(info->tty); - } - } else { - if (!(mdm_status & CyCTS)) { - /* !!! cy_stop isn't used because... */ - info->tty->stopped = 1; - base_addr[CyIER] &= - ~(CyTxMpty | CyTxRdy); - } - } - } - if (mdm_status & CyDSR) { - } - } - base_addr[CyMEOIR] = 0; - return IRQ_HANDLED; -} /* cy_modem_interrupt */ - -static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id) -{ - struct cyclades_port *info; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - int char_count, saved_cnt; - int outch; - - /* determine the channel and change to that context */ - channel = (u_short) (base_addr[CyLICR] >> 2); - - /* validate the port number (as configured and open) */ - if ((channel < 0) || (NR_PORTS <= channel)) { - base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); - base_addr[CyTEOIR] = CyNOTRANS; - return IRQ_HANDLED; - } - info = &cy_port[channel]; - info->last_active = jiffies; - if (info->tty == 0) { - base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); - base_addr[CyTEOIR] = CyNOTRANS; - return IRQ_HANDLED; - } - - /* load the on-chip space available for outbound data */ - saved_cnt = char_count = base_addr[CyTFTC]; - - if (info->x_char) { /* send special char */ - outch = info->x_char; - base_addr[CyTDR] = outch; - char_count--; - info->x_char = 0; - } - - if (info->x_break) { - /* The Cirrus chip requires the "Embedded Transmit - Commands" of start break, delay, and end break - sequences to be sent. The duration of the - break is given in TICs, which runs at HZ - (typically 100) and the PPR runs at 200 Hz, - so the delay is duration * 200/HZ, and thus a - break can run from 1/100 sec to about 5/4 sec. - Need to check these values - RGH 141095. - */ - base_addr[CyTDR] = 0; /* start break */ - base_addr[CyTDR] = 0x81; - base_addr[CyTDR] = 0; /* delay a bit */ - base_addr[CyTDR] = 0x82; - base_addr[CyTDR] = info->x_break * 200 / HZ; - base_addr[CyTDR] = 0; /* terminate break */ - base_addr[CyTDR] = 0x83; - char_count -= 7; - info->x_break = 0; - } - - while (char_count > 0) { - if (!info->xmit_cnt) { - base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); - break; - } - if (info->xmit_buf == 0) { - base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); - break; - } - if (info->tty->stopped || info->tty->hw_stopped) { - base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); - break; - } - /* Because the Embedded Transmit Commands have been - enabled, we must check to see if the escape - character, NULL, is being sent. If it is, we - must ensure that there is room for it to be - doubled in the output stream. Therefore we - no longer advance the pointer when the character - is fetched, but rather wait until after the check - for a NULL output character. (This is necessary - because there may not be room for the two chars - needed to send a NULL. - */ - outch = info->xmit_buf[info->xmit_tail]; - if (outch) { - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) - & (PAGE_SIZE - 1); - base_addr[CyTDR] = outch; - char_count--; - } else { - if (char_count > 1) { - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) - & (PAGE_SIZE - 1); - base_addr[CyTDR] = outch; - base_addr[CyTDR] = 0; - char_count--; - char_count--; - } else { - break; - } - } - } - - if (info->xmit_cnt < WAKEUP_CHARS) - tty_wakeup(info->tty); - - base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS; - return IRQ_HANDLED; -} /* cy_tx_interrupt */ - -static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id) -{ - struct tty_struct *tty; - struct cyclades_port *info; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - char data; - int char_count; - int save_cnt; - - /* determine the channel and change to that context */ - channel = (u_short) (base_addr[CyLICR] >> 2); - info = &cy_port[channel]; - info->last_active = jiffies; - save_cnt = char_count = base_addr[CyRFOC]; - - /* if there is nowhere to put the data, discard it */ - if (info->tty == 0) { - while (char_count--) { - data = base_addr[CyRDR]; - } - } else { /* there is an open port for this data */ - tty = info->tty; - /* load # characters available from the chip */ - -#ifdef CYCLOM_ENABLE_MONITORING - ++info->mon.int_count; - info->mon.char_count += char_count; - if (char_count > info->mon.char_max) - info->mon.char_max = char_count; - info->mon.char_last = char_count; -#endif - while (char_count--) { - data = base_addr[CyRDR]; - tty_insert_flip_char(tty, data, TTY_NORMAL); -#ifdef CYCLOM_16Y_HACK - udelay(10L); -#endif - } - tty_schedule_flip(tty); - } - /* end of service */ - base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS; - return IRQ_HANDLED; -} /* cy_rx_interrupt */ - -/* This is called whenever a port becomes active; - interrupts are enabled and DTR & RTS are turned on. - */ -static int startup(struct cyclades_port *info) -{ - unsigned long flags; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - - if (info->flags & ASYNC_INITIALIZED) { - return 0; - } - - if (!info->type) { - if (info->tty) { - set_bit(TTY_IO_ERROR, &info->tty->flags); - } - return 0; - } - if (!info->xmit_buf) { - info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); - if (!info->xmit_buf) { - return -ENOMEM; - } - } - - config_setup(info); - - channel = info->line; - -#ifdef SERIAL_DEBUG_OPEN - printk("startup channel %d\n", channel); -#endif - - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; - write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR); - - base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */ - base_addr[CyMSVR1] = CyRTS; -/* CP('S');CP('1'); */ - base_addr[CyMSVR2] = CyDTR; - -#ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: raising DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], - base_addr[CyMSVR2]); -#endif - - base_addr[CyIER] |= CyRxData; - info->flags |= ASYNC_INITIALIZED; - - if (info->tty) { - clear_bit(TTY_IO_ERROR, &info->tty->flags); - } - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - local_irq_restore(flags); - -#ifdef SERIAL_DEBUG_OPEN - printk(" done\n"); -#endif - return 0; -} /* startup */ - -void start_xmit(struct cyclades_port *info) -{ - unsigned long flags; - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - - channel = info->line; - local_irq_save(flags); - base_addr[CyCAR] = channel; - base_addr[CyIER] |= CyTxMpty; - local_irq_restore(flags); -} /* start_xmit */ - -/* - * This routine shuts down a serial port; interrupts are disabled, - * and DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct cyclades_port *info) -{ - unsigned long flags; - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - - if (!(info->flags & ASYNC_INITIALIZED)) { -/* CP('$'); */ - return; - } - - channel = info->line; - -#ifdef SERIAL_DEBUG_OPEN - printk("shutdown channel %d\n", channel); -#endif - - /* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE - SENT BEFORE DROPPING THE LINE !!! (Perhaps - set some flag that is read when XMTY happens.) - Other choices are to delay some fixed interval - or schedule some later processing. - */ - local_irq_save(flags); - if (info->xmit_buf) { - free_page((unsigned long)info->xmit_buf); - info->xmit_buf = NULL; - } - - base_addr[CyCAR] = (u_char) channel; - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { - base_addr[CyMSVR1] = 0; -/* CP('C');CP('1'); */ - base_addr[CyMSVR2] = 0; -#ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: dropping DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], - base_addr[CyMSVR2]); -#endif - } - write_cy_cmd(base_addr, CyDIS_RCVR); - /* it may be appropriate to clear _XMIT at - some later date (after testing)!!! */ - - if (info->tty) { - set_bit(TTY_IO_ERROR, &info->tty->flags); - } - info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); - -#ifdef SERIAL_DEBUG_OPEN - printk(" done\n"); -#endif -} /* shutdown */ - -/* - * This routine finds or computes the various line characteristics. - */ -static void config_setup(struct cyclades_port *info) -{ - unsigned long flags; - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - unsigned cflag; - int i; - unsigned char ti, need_init_chan = 0; - - if (!info->tty || !info->tty->termios) { - return; - } - if (info->line == -1) { - return; - } - cflag = info->tty->termios->c_cflag; - - /* baud rate */ - i = cflag & CBAUD; -#ifdef CBAUDEX -/* Starting with kernel 1.1.65, there is direct support for - higher baud rates. The following code supports those - changes. The conditional aspect allows this driver to be - used for earlier as well as later kernel versions. (The - mapping is slightly different from serial.c because there - is still the possibility of supporting 75 kbit/sec with - the Cyclades board.) - */ - if (i & CBAUDEX) { - if (i == B57600) - i = 16; - else if (i == B115200) - i = 18; -#ifdef B78600 - else if (i == B78600) - i = 17; -#endif - else - info->tty->termios->c_cflag &= ~CBAUDEX; - } -#endif - if (i == 15) { - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - i += 1; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - i += 3; - } - /* Don't ever change the speed of the console port. It will - * run at the speed specified in bootinfo, or at 19.2K */ - /* Actually, it should run at whatever speed 166Bug was using */ - /* Note info->timeout isn't used at present */ - if (info != serial_console_info) { - info->tbpr = baud_bpr[i]; /* Tx BPR */ - info->tco = baud_co[i]; /* Tx CO */ - info->rbpr = baud_bpr[i]; /* Rx BPR */ - info->rco = baud_co[i] >> 5; /* Rx CO */ - if (baud_table[i] == 134) { - info->timeout = - (info->xmit_fifo_size * HZ * 30 / 269) + 2; - /* get it right for 134.5 baud */ - } else if (baud_table[i]) { - info->timeout = - (info->xmit_fifo_size * HZ * 15 / baud_table[i]) + - 2; - /* this needs to be propagated into the card info */ - } else { - info->timeout = 0; - } - } - /* By tradition (is it a standard?) a baud rate of zero - implies the line should be/has been closed. A bit - later in this routine such a test is performed. */ - - /* byte size and parity */ - info->cor7 = 0; - info->cor6 = 0; - info->cor5 = 0; - info->cor4 = (info->default_threshold ? info->default_threshold : baud_cor4[i]); /* receive threshold */ - /* Following two lines added 101295, RGH. */ - /* It is obviously wrong to access CyCORx, and not info->corx here, - * try and remember to fix it later! */ - channel = info->line; - base_addr[CyCAR] = (u_char) channel; - if (C_CLOCAL(info->tty)) { - if (base_addr[CyIER] & CyMdmCh) - base_addr[CyIER] &= ~CyMdmCh; /* without modem intr */ - /* ignore 1->0 modem transitions */ - if (base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) - base_addr[CyCOR4] &= ~(CyDSR | CyCTS | CyDCD); - /* ignore 0->1 modem transitions */ - if (base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) - base_addr[CyCOR5] &= ~(CyDSR | CyCTS | CyDCD); - } else { - if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh) - base_addr[CyIER] |= CyMdmCh; /* with modem intr */ - /* act on 1->0 modem transitions */ - if ((base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) != - (CyDSR | CyCTS | CyDCD)) - base_addr[CyCOR4] |= CyDSR | CyCTS | CyDCD; - /* act on 0->1 modem transitions */ - if ((base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) != - (CyDSR | CyCTS | CyDCD)) - base_addr[CyCOR5] |= CyDSR | CyCTS | CyDCD; - } - info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP; - info->cor2 = CyETC; - switch (cflag & CSIZE) { - case CS5: - info->cor1 = Cy_5_BITS; - break; - case CS6: - info->cor1 = Cy_6_BITS; - break; - case CS7: - info->cor1 = Cy_7_BITS; - break; - case CS8: - info->cor1 = Cy_8_BITS; - break; - } - if (cflag & PARENB) { - if (cflag & PARODD) { - info->cor1 |= CyPARITY_O; - } else { - info->cor1 |= CyPARITY_E; - } - } else { - info->cor1 |= CyPARITY_NONE; - } - - /* CTS flow control flag */ -#if 0 - /* Don't complcate matters for now! RGH 141095 */ - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->cor2 |= CyCtsAE; - } else { - info->flags &= ~ASYNC_CTS_FLOW; - info->cor2 &= ~CyCtsAE; - } -#endif - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else - info->flags |= ASYNC_CHECK_CD; - - /*********************************************** - The hardware option, CyRtsAO, presents RTS when - the chip has characters to send. Since most modems - use RTS as reverse (inbound) flow control, this - option is not used. If inbound flow control is - necessary, DTR can be programmed to provide the - appropriate signals for use with a non-standard - cable. Contact Marcio Saito for details. - ***********************************************/ - - channel = info->line; - - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; - - /* CyCMR set once only in mvme167_init_serial() */ - if (base_addr[CyLICR] != channel << 2) - base_addr[CyLICR] = channel << 2; - if (base_addr[CyLIVR] != 0x5c) - base_addr[CyLIVR] = 0x5c; - - /* tx and rx baud rate */ - - if (base_addr[CyCOR1] != info->cor1) - need_init_chan = 1; - if (base_addr[CyTCOR] != info->tco) - base_addr[CyTCOR] = info->tco; - if (base_addr[CyTBPR] != info->tbpr) - base_addr[CyTBPR] = info->tbpr; - if (base_addr[CyRCOR] != info->rco) - base_addr[CyRCOR] = info->rco; - if (base_addr[CyRBPR] != info->rbpr) - base_addr[CyRBPR] = info->rbpr; - - /* set line characteristics according configuration */ - - if (base_addr[CySCHR1] != START_CHAR(info->tty)) - base_addr[CySCHR1] = START_CHAR(info->tty); - if (base_addr[CySCHR2] != STOP_CHAR(info->tty)) - base_addr[CySCHR2] = STOP_CHAR(info->tty); - if (base_addr[CySCRL] != START_CHAR(info->tty)) - base_addr[CySCRL] = START_CHAR(info->tty); - if (base_addr[CySCRH] != START_CHAR(info->tty)) - base_addr[CySCRH] = START_CHAR(info->tty); - if (base_addr[CyCOR1] != info->cor1) - base_addr[CyCOR1] = info->cor1; - if (base_addr[CyCOR2] != info->cor2) - base_addr[CyCOR2] = info->cor2; - if (base_addr[CyCOR3] != info->cor3) - base_addr[CyCOR3] = info->cor3; - if (base_addr[CyCOR4] != info->cor4) - base_addr[CyCOR4] = info->cor4; - if (base_addr[CyCOR5] != info->cor5) - base_addr[CyCOR5] = info->cor5; - if (base_addr[CyCOR6] != info->cor6) - base_addr[CyCOR6] = info->cor6; - if (base_addr[CyCOR7] != info->cor7) - base_addr[CyCOR7] = info->cor7; - - if (need_init_chan) - write_cy_cmd(base_addr, CyINIT_CHAN); - - base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */ - - /* 2ms default rx timeout */ - ti = info->default_timeout ? info->default_timeout : 0x02; - if (base_addr[CyRTPRL] != ti) - base_addr[CyRTPRL] = ti; - if (base_addr[CyRTPRH] != 0) - base_addr[CyRTPRH] = 0; - - /* Set up RTS here also ????? RGH 141095 */ - if (i == 0) { /* baud rate is zero, turn off line */ - if ((base_addr[CyMSVR2] & CyDTR) == CyDTR) - base_addr[CyMSVR2] = 0; -#ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: dropping DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], - base_addr[CyMSVR2]); -#endif - } else { - if ((base_addr[CyMSVR2] & CyDTR) != CyDTR) - base_addr[CyMSVR2] = CyDTR; -#ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: raising DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], - base_addr[CyMSVR2]); -#endif - } - - if (info->tty) { - clear_bit(TTY_IO_ERROR, &info->tty->flags); - } - - local_irq_restore(flags); - -} /* config_setup */ - -static int cy_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - -#ifdef SERIAL_DEBUG_IO - printk("cy_put_char %s(0x%02x)\n", tty->name, ch); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_put_char")) - return 0; - - if (!info->xmit_buf) - return 0; - - local_irq_save(flags); - if (info->xmit_cnt >= PAGE_SIZE - 1) { - local_irq_restore(flags); - return 0; - } - - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= PAGE_SIZE - 1; - info->xmit_cnt++; - local_irq_restore(flags); - return 1; -} /* cy_put_char */ - -static void cy_flush_chars(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - -#ifdef SERIAL_DEBUG_IO - printk("cy_flush_chars %s\n", tty->name); /* */ -#endif - - if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) - return; - - if (info->xmit_cnt <= 0 || tty->stopped - || tty->hw_stopped || !info->xmit_buf) - return; - - channel = info->line; - - local_irq_save(flags); - base_addr[CyCAR] = channel; - base_addr[CyIER] |= CyTxMpty; - local_irq_restore(flags); -} /* cy_flush_chars */ - -/* This routine gets called when tty_write has put something into - the write_queue. If the port is not already transmitting stuff, - start it off by enabling interrupts. The interrupt service - routine will then ensure that the characters are sent. If the - port is already active, there is no need to kick it. - */ -static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - int c, total = 0; - -#ifdef SERIAL_DEBUG_IO - printk("cy_write %s\n", tty->name); /* */ -#endif - - if (serial_paranoia_check(info, tty->name, "cy_write")) { - return 0; - } - - if (!info->xmit_buf) { - return 0; - } - - while (1) { - local_irq_save(flags); - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) { - local_irq_restore(flags); - break; - } - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - info->xmit_head = - (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - local_irq_restore(flags); - - buf += c; - count -= c; - total += c; - } - - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { - start_xmit(info); - } - return total; -} /* cy_write */ - -static int cy_write_room(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - int ret; - -#ifdef SERIAL_DEBUG_IO - printk("cy_write_room %s\n", tty->name); /* */ -#endif - - if (serial_paranoia_check(info, tty->name, "cy_write_room")) - return 0; - ret = PAGE_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} /* cy_write_room */ - -static int cy_chars_in_buffer(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef SERIAL_DEBUG_IO - printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */ -#endif - - if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) - return 0; - - return info->xmit_cnt; -} /* cy_chars_in_buffer */ - -static void cy_flush_buffer(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - -#ifdef SERIAL_DEBUG_IO - printk("cy_flush_buffer %s\n", tty->name); /* */ -#endif - - if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) - return; - local_irq_save(flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - local_irq_restore(flags); - tty_wakeup(tty); -} /* cy_flush_buffer */ - -/* This routine is called by the upper-layer tty layer to signal - that incoming characters should be throttled or that the - throttle should be released. - */ -static void cy_throttle(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); - printk("cy_throttle %s\n", tty->name); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) { - return; - } - - if (I_IXOFF(tty)) { - info->x_char = STOP_CHAR(tty); - /* Should use the "Send Special Character" feature!!! */ - } - - channel = info->line; - - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; - base_addr[CyMSVR1] = 0; - local_irq_restore(flags); -} /* cy_throttle */ - -static void cy_unthrottle(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - unsigned long flags; - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); - printk("cy_unthrottle %s\n", tty->name); -#endif - - if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) { - return; - } - - if (I_IXOFF(tty)) { - info->x_char = START_CHAR(tty); - /* Should use the "Send Special Character" feature!!! */ - } - - channel = info->line; - - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; - base_addr[CyMSVR1] = CyRTS; - local_irq_restore(flags); -} /* cy_unthrottle */ - -static int -get_serial_info(struct cyclades_port *info, - struct serial_struct __user * retinfo) -{ - struct serial_struct tmp; - -/* CP('g'); */ - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = info->line; - tmp.irq = 0; - tmp.flags = info->flags; - tmp.baud_base = 0; /*!!! */ - tmp.close_delay = info->close_delay; - tmp.custom_divisor = 0; /*!!! */ - tmp.hub6 = 0; /*!!! */ - return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; -} /* get_serial_info */ - -static int -set_serial_info(struct cyclades_port *info, - struct serial_struct __user * new_info) -{ - struct serial_struct new_serial; - struct cyclades_port old_info; - -/* CP('s'); */ - if (!new_info) - return -EFAULT; - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != - (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - goto check_and_exit; - } - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay; - -check_and_exit: - if (info->flags & ASYNC_INITIALIZED) { - config_setup(info); - return 0; - } - return startup(info); -} /* set_serial_info */ - -static int cy_tiocmget(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - int channel; - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - unsigned long flags; - unsigned char status; - - channel = info->line; - - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; - status = base_addr[CyMSVR1] | base_addr[CyMSVR2]; - local_irq_restore(flags); - - return ((status & CyRTS) ? TIOCM_RTS : 0) - | ((status & CyDTR) ? TIOCM_DTR : 0) - | ((status & CyDCD) ? TIOCM_CAR : 0) - | ((status & CyDSR) ? TIOCM_DSR : 0) - | ((status & CyCTS) ? TIOCM_CTS : 0); -} /* cy_tiocmget */ - -static int -cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) -{ - struct cyclades_port *info = tty->driver_data; - int channel; - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - unsigned long flags; - - channel = info->line; - - if (set & TIOCM_RTS) { - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; - base_addr[CyMSVR1] = CyRTS; - local_irq_restore(flags); - } - if (set & TIOCM_DTR) { - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; -/* CP('S');CP('2'); */ - base_addr[CyMSVR2] = CyDTR; -#ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: raising DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], - base_addr[CyMSVR2]); -#endif - local_irq_restore(flags); - } - - if (clear & TIOCM_RTS) { - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; - base_addr[CyMSVR1] = 0; - local_irq_restore(flags); - } - if (clear & TIOCM_DTR) { - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; -/* CP('C');CP('2'); */ - base_addr[CyMSVR2] = 0; -#ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: dropping DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], - base_addr[CyMSVR2]); -#endif - local_irq_restore(flags); - } - - return 0; -} /* set_modem_info */ - -static void send_break(struct cyclades_port *info, int duration) -{ /* Let the transmit ISR take care of this (since it - requires stuffing characters into the output stream). - */ - info->x_break = duration; - if (!info->xmit_cnt) { - start_xmit(info); - } -} /* send_break */ - -static int -get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon) -{ - - if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) - return -EFAULT; - info->mon.int_count = 0; - info->mon.char_count = 0; - info->mon.char_max = 0; - info->mon.char_last = 0; - return 0; -} - -static int set_threshold(struct cyclades_port *info, unsigned long __user * arg) -{ - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - unsigned long value; - int channel; - - if (get_user(value, arg)) - return -EFAULT; - - channel = info->line; - info->cor4 &= ~CyREC_FIFO; - info->cor4 |= value & CyREC_FIFO; - base_addr[CyCOR4] = info->cor4; - return 0; -} - -static int -get_threshold(struct cyclades_port *info, unsigned long __user * value) -{ - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - unsigned long tmp; - - channel = info->line; - - tmp = base_addr[CyCOR4] & CyREC_FIFO; - return put_user(tmp, value); -} - -static int -set_default_threshold(struct cyclades_port *info, unsigned long __user * arg) -{ - unsigned long value; - - if (get_user(value, arg)) - return -EFAULT; - - info->default_threshold = value & 0x0f; - return 0; -} - -static int -get_default_threshold(struct cyclades_port *info, unsigned long __user * value) -{ - return put_user(info->default_threshold, value); -} - -static int set_timeout(struct cyclades_port *info, unsigned long __user * arg) -{ - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - unsigned long value; - - if (get_user(value, arg)) - return -EFAULT; - - channel = info->line; - - base_addr[CyRTPRL] = value & 0xff; - base_addr[CyRTPRH] = (value >> 8) & 0xff; - return 0; -} - -static int get_timeout(struct cyclades_port *info, unsigned long __user * value) -{ - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - unsigned long tmp; - - channel = info->line; - - tmp = base_addr[CyRTPRL]; - return put_user(tmp, value); -} - -static int set_default_timeout(struct cyclades_port *info, unsigned long value) -{ - info->default_timeout = value & 0xff; - return 0; -} - -static int -get_default_timeout(struct cyclades_port *info, unsigned long __user * value) -{ - return put_user(info->default_timeout, value); -} - -static int -cy_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct cyclades_port *info = tty->driver_data; - int ret_val = 0; - void __user *argp = (void __user *)arg; - -#ifdef SERIAL_DEBUG_OTHER - printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */ -#endif - - tty_lock(); - - switch (cmd) { - case CYGETMON: - ret_val = get_mon_info(info, argp); - break; - case CYGETTHRESH: - ret_val = get_threshold(info, argp); - break; - case CYSETTHRESH: - ret_val = set_threshold(info, argp); - break; - case CYGETDEFTHRESH: - ret_val = get_default_threshold(info, argp); - break; - case CYSETDEFTHRESH: - ret_val = set_default_threshold(info, argp); - break; - case CYGETTIMEOUT: - ret_val = get_timeout(info, argp); - break; - case CYSETTIMEOUT: - ret_val = set_timeout(info, argp); - break; - case CYGETDEFTIMEOUT: - ret_val = get_default_timeout(info, argp); - break; - case CYSETDEFTIMEOUT: - ret_val = set_default_timeout(info, (unsigned long)arg); - break; - case TCSBRK: /* SVID version: non-zero arg --> no break */ - ret_val = tty_check_change(tty); - if (ret_val) - break; - tty_wait_until_sent(tty, 0); - if (!arg) - send_break(info, HZ / 4); /* 1/4 second */ - break; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - ret_val = tty_check_change(tty); - if (ret_val) - break; - tty_wait_until_sent(tty, 0); - send_break(info, arg ? arg * (HZ / 10) : HZ / 4); - break; - -/* The following commands are incompletely implemented!!! */ - case TIOCGSERIAL: - ret_val = get_serial_info(info, argp); - break; - case TIOCSSERIAL: - ret_val = set_serial_info(info, argp); - break; - default: - ret_val = -ENOIOCTLCMD; - } - tty_unlock(); - -#ifdef SERIAL_DEBUG_OTHER - printk("cy_ioctl done\n"); -#endif - - return ret_val; -} /* cy_ioctl */ - -static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef SERIAL_DEBUG_OTHER - printk("cy_set_termios %s\n", tty->name); -#endif - - if (tty->termios->c_cflag == old_termios->c_cflag) - return; - config_setup(info); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->stopped = 0; - cy_start(tty); - } -#ifdef tytso_patch_94Nov25_1726 - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); -#endif -} /* cy_set_termios */ - -static void cy_close(struct tty_struct *tty, struct file *filp) -{ - struct cyclades_port *info = tty->driver_data; - -/* CP('C'); */ -#ifdef SERIAL_DEBUG_OTHER - printk("cy_close %s\n", tty->name); -#endif - - if (!info || serial_paranoia_check(info, tty->name, "cy_close")) { - return; - } -#ifdef SERIAL_DEBUG_OPEN - printk("cy_close %s, count = %d\n", tty->name, info->count); -#endif - - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("cy_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } -#ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: decrementing count to %d\n", __LINE__, - info->count - 1); -#endif - if (--info->count < 0) { - printk("cy_close: bad serial port count for ttys%d: %d\n", - info->line, info->count); -#ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: setting count to 0\n", __LINE__); -#endif - info->count = 0; - } - if (info->count) - return; - info->flags |= ASYNC_CLOSING; - if (info->flags & ASYNC_INITIALIZED) - tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ - shutdown(info); - cy_flush_buffer(tty); - tty_ldisc_flush(tty); - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs - (info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - -#ifdef SERIAL_DEBUG_OTHER - printk("cy_close done\n"); -#endif -} /* cy_close */ - -/* - * cy_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -void cy_hangup(struct tty_struct *tty) -{ - struct cyclades_port *info = tty->driver_data; - -#ifdef SERIAL_DEBUG_OTHER - printk("cy_hangup %s\n", tty->name); /* */ -#endif - - if (serial_paranoia_check(info, tty->name, "cy_hangup")) - return; - - shutdown(info); -#if 0 - info->event = 0; - info->count = 0; -#ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: setting count to 0\n", __LINE__); -#endif - info->tty = 0; -#endif - info->flags &= ~ASYNC_NORMAL_ACTIVE; - wake_up_interruptible(&info->open_wait); -} /* cy_hangup */ - -/* - * ------------------------------------------------------------ - * cy_open() and friends - * ------------------------------------------------------------ - */ - -static int -block_til_ready(struct tty_struct *tty, struct file *filp, - struct cyclades_port *info) -{ - DECLARE_WAITQUEUE(wait, current); - unsigned long flags; - int channel; - int retval; - volatile u_char *base_addr = (u_char *) BASE_ADDR; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (info->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&info->close_wait); - if (info->flags & ASYNC_HUP_NOTIFY) { - return -EAGAIN; - } else { - return -ERESTARTSYS; - } - } - - /* - * If non-blocking mode is set, then make the check up front - * and then exit. - */ - if (filp->f_flags & O_NONBLOCK) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * cy_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: %s, count = %d\n", - tty->name, info->count); - /**/ -#endif - info->count--; -#ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count); -#endif - info->blocked_open++; - - channel = info->line; - - while (1) { - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; - base_addr[CyMSVR1] = CyRTS; -/* CP('S');CP('4'); */ - base_addr[CyMSVR2] = CyDTR; -#ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: raising DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], - base_addr[CyMSVR2]); -#endif - local_irq_restore(flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) - || !(info->flags & ASYNC_INITIALIZED)) { - if (info->flags & ASYNC_HUP_NOTIFY) { - retval = -EAGAIN; - } else { - retval = -ERESTARTSYS; - } - break; - } - local_irq_save(flags); - base_addr[CyCAR] = (u_char) channel; -/* CP('L');CP1(1 && C_CLOCAL(tty)); CP1(1 && (base_addr[CyMSVR1] & CyDCD) ); */ - if (!(info->flags & ASYNC_CLOSING) - && (C_CLOCAL(tty) - || (base_addr[CyMSVR1] & CyDCD))) { - local_irq_restore(flags); - break; - } - local_irq_restore(flags); - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: %s, count = %d\n", - tty->name, info->count); - /**/ -#endif - tty_unlock(); - schedule(); - tty_lock(); - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) { - info->count++; -#ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: incrementing count to %d\n", __LINE__, - info->count); -#endif - } - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: %s, count = %d\n", - tty->name, info->count); - /**/ -#endif - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} /* block_til_ready */ - -/* - * This routine is called whenever a serial port is opened. It - * performs the serial-specific initialization for the tty structure. - */ -int cy_open(struct tty_struct *tty, struct file *filp) -{ - struct cyclades_port *info; - int retval, line; - -/* CP('O'); */ - line = tty->index; - if ((line < 0) || (NR_PORTS <= line)) { - return -ENODEV; - } - info = &cy_port[line]; - if (info->line < 0) { - return -ENODEV; - } -#ifdef SERIAL_DEBUG_OTHER - printk("cy_open %s\n", tty->name); /* */ -#endif - if (serial_paranoia_check(info, tty->name, "cy_open")) { - return -ENODEV; - } -#ifdef SERIAL_DEBUG_OPEN - printk("cy_open %s, count = %d\n", tty->name, info->count); - /**/ -#endif - info->count++; -#ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count); -#endif - tty->driver_data = info; - info->tty = tty; - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) { - return retval; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("cy_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } -#ifdef SERIAL_DEBUG_OPEN - printk("cy_open done\n"); - /**/ -#endif - return 0; -} /* cy_open */ - -/* - * --------------------------------------------------------------------- - * serial167_init() and friends - * - * serial167_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -/* - * This routine prints out the appropriate serial driver version - * number, and identifies which options were configured into this - * driver. - */ -static void show_version(void) -{ - printk("MVME166/167 cd2401 driver\n"); -} /* show_version */ - -/* initialize chips on card -- return number of valid - chips (which is number of ports/4) */ - -/* - * This initialises the hardware to a reasonable state. It should - * probe the chip first so as to copy 166-Bug setup as a default for - * port 0. It initialises CMR to CyASYNC; that is never done again, so - * as to limit the number of CyINIT_CHAN commands in normal running. - * - * ... I wonder what I should do if this fails ... - */ - -void mvme167_serial_console_setup(int cflag) -{ - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int ch; - u_char spd; - u_char rcor, rbpr, badspeed = 0; - unsigned long flags; - - local_irq_save(flags); - - /* - * First probe channel zero of the chip, to see what speed has - * been selected. - */ - - base_addr[CyCAR] = 0; - - rcor = base_addr[CyRCOR] << 5; - rbpr = base_addr[CyRBPR]; - - for (spd = 0; spd < sizeof(baud_bpr); spd++) - if (rbpr == baud_bpr[spd] && rcor == baud_co[spd]) - break; - if (spd >= sizeof(baud_bpr)) { - spd = 14; /* 19200 */ - badspeed = 1; /* Failed to identify speed */ - } - initial_console_speed = spd; - - /* OK, we have chosen a speed, now reset and reinitialise */ - - my_udelay(20000L); /* Allow time for any active o/p to complete */ - if (base_addr[CyCCR] != 0x00) { - local_irq_restore(flags); - /* printk(" chip is never idle (CCR != 0)\n"); */ - return; - } - - base_addr[CyCCR] = CyCHIP_RESET; /* Reset the chip */ - my_udelay(1000L); - - if (base_addr[CyGFRCR] == 0x00) { - local_irq_restore(flags); - /* printk(" chip is not responding (GFRCR stayed 0)\n"); */ - return; - } - - /* - * System clock is 20Mhz, divided by 2048, so divide by 10 for a 1.0ms - * tick - */ - - base_addr[CyTPR] = 10; - - base_addr[CyPILR1] = 0x01; /* Interrupt level for modem change */ - base_addr[CyPILR2] = 0x02; /* Interrupt level for tx ints */ - base_addr[CyPILR3] = 0x03; /* Interrupt level for rx ints */ - - /* - * Attempt to set up all channels to something reasonable, and - * bang out a INIT_CHAN command. We should then be able to limit - * the amount of fiddling we have to do in normal running. - */ - - for (ch = 3; ch >= 0; ch--) { - base_addr[CyCAR] = (u_char) ch; - base_addr[CyIER] = 0; - base_addr[CyCMR] = CyASYNC; - base_addr[CyLICR] = (u_char) ch << 2; - base_addr[CyLIVR] = 0x5c; - base_addr[CyTCOR] = baud_co[spd]; - base_addr[CyTBPR] = baud_bpr[spd]; - base_addr[CyRCOR] = baud_co[spd] >> 5; - base_addr[CyRBPR] = baud_bpr[spd]; - base_addr[CySCHR1] = 'Q' & 0x1f; - base_addr[CySCHR2] = 'X' & 0x1f; - base_addr[CySCRL] = 0; - base_addr[CySCRH] = 0; - base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE; - base_addr[CyCOR2] = 0; - base_addr[CyCOR3] = Cy_1_STOP; - base_addr[CyCOR4] = baud_cor4[spd]; - base_addr[CyCOR5] = 0; - base_addr[CyCOR6] = 0; - base_addr[CyCOR7] = 0; - base_addr[CyRTPRL] = 2; - base_addr[CyRTPRH] = 0; - base_addr[CyMSVR1] = 0; - base_addr[CyMSVR2] = 0; - write_cy_cmd(base_addr, CyINIT_CHAN | CyDIS_RCVR | CyDIS_XMTR); - } - - /* - * Now do specials for channel zero.... - */ - - base_addr[CyMSVR1] = CyRTS; - base_addr[CyMSVR2] = CyDTR; - base_addr[CyIER] = CyRxData; - write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR); - - local_irq_restore(flags); - - my_udelay(20000L); /* Let it all settle down */ - - printk("CD2401 initialised, chip is rev 0x%02x\n", base_addr[CyGFRCR]); - if (badspeed) - printk - (" WARNING: Failed to identify line speed, rcor=%02x,rbpr=%02x\n", - rcor >> 5, rbpr); -} /* serial_console_init */ - -static const struct tty_operations cy_ops = { - .open = cy_open, - .close = cy_close, - .write = cy_write, - .put_char = cy_put_char, - .flush_chars = cy_flush_chars, - .write_room = cy_write_room, - .chars_in_buffer = cy_chars_in_buffer, - .flush_buffer = cy_flush_buffer, - .ioctl = cy_ioctl, - .throttle = cy_throttle, - .unthrottle = cy_unthrottle, - .set_termios = cy_set_termios, - .stop = cy_stop, - .start = cy_start, - .hangup = cy_hangup, - .tiocmget = cy_tiocmget, - .tiocmset = cy_tiocmset, -}; - -/* The serial driver boot-time initialization code! - Hardware I/O ports are mapped to character special devices on a - first found, first allocated manner. That is, this code searches - for Cyclom cards in the system. As each is found, it is probed - to discover how many chips (and thus how many ports) are present. - These ports are mapped to the tty ports 64 and upward in monotonic - fashion. If an 8-port card is replaced with a 16-port card, the - port mapping on a following card will shift. - - This approach is different from what is used in the other serial - device driver because the Cyclom is more properly a multiplexer, - not just an aggregation of serial ports on one card. - - If there are more cards with more ports than have been statically - allocated above, a warning is printed and the extra ports are ignored. - */ -static int __init serial167_init(void) -{ - struct cyclades_port *info; - int ret = 0; - int good_ports = 0; - int port_num = 0; - int index; - int DefSpeed; -#ifdef notyet - struct sigaction sa; -#endif - - if (!(mvme16x_config & MVME16x_CONFIG_GOT_CD2401)) - return 0; - - cy_serial_driver = alloc_tty_driver(NR_PORTS); - if (!cy_serial_driver) - return -ENOMEM; - -#if 0 - scrn[1] = '\0'; -#endif - - show_version(); - - /* Has "console=0,9600n8" been used in bootinfo to change speed? */ - if (serial_console_cflag) - DefSpeed = serial_console_cflag & 0017; - else { - DefSpeed = initial_console_speed; - serial_console_info = &cy_port[0]; - serial_console_cflag = DefSpeed | CS8; -#if 0 - serial_console = 64; /*callout_driver.minor_start */ -#endif - } - - /* Initialize the tty_driver structure */ - - cy_serial_driver->owner = THIS_MODULE; - cy_serial_driver->name = "ttyS"; - cy_serial_driver->major = TTY_MAJOR; - cy_serial_driver->minor_start = 64; - cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; - cy_serial_driver->init_termios = tty_std_termios; - cy_serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - cy_serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(cy_serial_driver, &cy_ops); - - ret = tty_register_driver(cy_serial_driver); - if (ret) { - printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n"); - put_tty_driver(cy_serial_driver); - return ret; - } - - port_num = 0; - info = cy_port; - for (index = 0; index < 1; index++) { - - good_ports = 4; - - if (port_num < NR_PORTS) { - while (good_ports-- && port_num < NR_PORTS) { - /*** initialize port ***/ - info->magic = CYCLADES_MAGIC; - info->type = PORT_CIRRUS; - info->card = index; - info->line = port_num; - info->flags = STD_COM_FLAGS; - info->tty = NULL; - info->xmit_fifo_size = 12; - info->cor1 = CyPARITY_NONE | Cy_8_BITS; - info->cor2 = CyETC; - info->cor3 = Cy_1_STOP; - info->cor4 = 0x08; /* _very_ small receive threshold */ - info->cor5 = 0; - info->cor6 = 0; - info->cor7 = 0; - info->tbpr = baud_bpr[DefSpeed]; /* Tx BPR */ - info->tco = baud_co[DefSpeed]; /* Tx CO */ - info->rbpr = baud_bpr[DefSpeed]; /* Rx BPR */ - info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */ - info->close_delay = 0; - info->x_char = 0; - info->count = 0; -#ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: setting count to 0\n", - __LINE__); -#endif - info->blocked_open = 0; - info->default_threshold = 0; - info->default_timeout = 0; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - /* info->session */ - /* info->pgrp */ -/*** !!!!!!!! this may expose new bugs !!!!!!!!! *********/ - info->read_status_mask = - CyTIMEOUT | CySPECHAR | CyBREAK | CyPARITY | - CyFRAME | CyOVERRUN; - /* info->timeout */ - - printk("ttyS%d ", info->line); - port_num++; - info++; - if (!(port_num & 7)) { - printk("\n "); - } - } - } - printk("\n"); - } - while (port_num < NR_PORTS) { - info->line = -1; - port_num++; - info++; - } - - ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0, - "cd2401_errors", cd2401_rxerr_interrupt); - if (ret) { - printk(KERN_ERR "Could't get cd2401_errors IRQ"); - goto cleanup_serial_driver; - } - - ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0, - "cd2401_modem", cd2401_modem_interrupt); - if (ret) { - printk(KERN_ERR "Could't get cd2401_modem IRQ"); - goto cleanup_irq_cd2401_errors; - } - - ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0, - "cd2401_txints", cd2401_tx_interrupt); - if (ret) { - printk(KERN_ERR "Could't get cd2401_txints IRQ"); - goto cleanup_irq_cd2401_modem; - } - - ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0, - "cd2401_rxints", cd2401_rx_interrupt); - if (ret) { - printk(KERN_ERR "Could't get cd2401_rxints IRQ"); - goto cleanup_irq_cd2401_txints; - } - - /* Now we have registered the interrupt handlers, allow the interrupts */ - - pcc2chip[PccSCCMICR] = 0x15; /* Serial ints are level 5 */ - pcc2chip[PccSCCTICR] = 0x15; - pcc2chip[PccSCCRICR] = 0x15; - - pcc2chip[PccIMLR] = 3; /* Allow PCC2 ints above 3!? */ - - return 0; -cleanup_irq_cd2401_txints: - free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt); -cleanup_irq_cd2401_modem: - free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt); -cleanup_irq_cd2401_errors: - free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt); -cleanup_serial_driver: - if (tty_unregister_driver(cy_serial_driver)) - printk(KERN_ERR - "Couldn't unregister MVME166/7 serial driver\n"); - put_tty_driver(cy_serial_driver); - return ret; -} /* serial167_init */ - -module_init(serial167_init); - -#ifdef CYCLOM_SHOW_STATUS -static void show_status(int line_num) -{ - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - int channel; - struct cyclades_port *info; - unsigned long flags; - - info = &cy_port[line_num]; - channel = info->line; - printk(" channel %d\n", channel); - /**/ printk(" cy_port\n"); - printk(" card line flags = %d %d %x\n", - info->card, info->line, info->flags); - printk - (" *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n", - (long)info->tty, info->read_status_mask, info->timeout, - info->xmit_fifo_size); - printk(" cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n", - info->cor1, info->cor2, info->cor3, info->cor4, info->cor5, - info->cor6, info->cor7); - printk(" tbpr,tco,rbpr,rco = %d %d %d %d\n", info->tbpr, info->tco, - info->rbpr, info->rco); - printk(" close_delay event count = %d %d %d\n", info->close_delay, - info->event, info->count); - printk(" x_char blocked_open = %x %x\n", info->x_char, - info->blocked_open); - printk(" open_wait = %lx %lx %lx\n", (long)info->open_wait); - - local_irq_save(flags); - -/* Global Registers */ - - printk(" CyGFRCR %x\n", base_addr[CyGFRCR]); - printk(" CyCAR %x\n", base_addr[CyCAR]); - printk(" CyRISR %x\n", base_addr[CyRISR]); - printk(" CyTISR %x\n", base_addr[CyTISR]); - printk(" CyMISR %x\n", base_addr[CyMISR]); - printk(" CyRIR %x\n", base_addr[CyRIR]); - printk(" CyTIR %x\n", base_addr[CyTIR]); - printk(" CyMIR %x\n", base_addr[CyMIR]); - printk(" CyTPR %x\n", base_addr[CyTPR]); - - base_addr[CyCAR] = (u_char) channel; - -/* Virtual Registers */ - -#if 0 - printk(" CyRIVR %x\n", base_addr[CyRIVR]); - printk(" CyTIVR %x\n", base_addr[CyTIVR]); - printk(" CyMIVR %x\n", base_addr[CyMIVR]); - printk(" CyMISR %x\n", base_addr[CyMISR]); -#endif - -/* Channel Registers */ - - printk(" CyCCR %x\n", base_addr[CyCCR]); - printk(" CyIER %x\n", base_addr[CyIER]); - printk(" CyCOR1 %x\n", base_addr[CyCOR1]); - printk(" CyCOR2 %x\n", base_addr[CyCOR2]); - printk(" CyCOR3 %x\n", base_addr[CyCOR3]); - printk(" CyCOR4 %x\n", base_addr[CyCOR4]); - printk(" CyCOR5 %x\n", base_addr[CyCOR5]); -#if 0 - printk(" CyCCSR %x\n", base_addr[CyCCSR]); - printk(" CyRDCR %x\n", base_addr[CyRDCR]); -#endif - printk(" CySCHR1 %x\n", base_addr[CySCHR1]); - printk(" CySCHR2 %x\n", base_addr[CySCHR2]); -#if 0 - printk(" CySCHR3 %x\n", base_addr[CySCHR3]); - printk(" CySCHR4 %x\n", base_addr[CySCHR4]); - printk(" CySCRL %x\n", base_addr[CySCRL]); - printk(" CySCRH %x\n", base_addr[CySCRH]); - printk(" CyLNC %x\n", base_addr[CyLNC]); - printk(" CyMCOR1 %x\n", base_addr[CyMCOR1]); - printk(" CyMCOR2 %x\n", base_addr[CyMCOR2]); -#endif - printk(" CyRTPRL %x\n", base_addr[CyRTPRL]); - printk(" CyRTPRH %x\n", base_addr[CyRTPRH]); - printk(" CyMSVR1 %x\n", base_addr[CyMSVR1]); - printk(" CyMSVR2 %x\n", base_addr[CyMSVR2]); - printk(" CyRBPR %x\n", base_addr[CyRBPR]); - printk(" CyRCOR %x\n", base_addr[CyRCOR]); - printk(" CyTBPR %x\n", base_addr[CyTBPR]); - printk(" CyTCOR %x\n", base_addr[CyTCOR]); - - local_irq_restore(flags); -} /* show_status */ -#endif - -#if 0 -/* Dummy routine in mvme16x/config.c for now */ - -/* Serial console setup. Called from linux/init/main.c */ - -void console_setup(char *str, int *ints) -{ - char *s; - int baud, bits, parity; - int cflag = 0; - - /* Sanity check. */ - if (ints[0] > 3 || ints[1] > 3) - return; - - /* Get baud, bits and parity */ - baud = 2400; - bits = 8; - parity = 'n'; - if (ints[2]) - baud = ints[2]; - if ((s = strchr(str, ','))) { - do { - s++; - } while (*s >= '0' && *s <= '9'); - if (*s) - parity = *s++; - if (*s) - bits = *s - '0'; - } - - /* Now construct a cflag setting. */ - switch (baud) { - case 1200: - cflag |= B1200; - break; - case 9600: - cflag |= B9600; - break; - case 19200: - cflag |= B19200; - break; - case 38400: - cflag |= B38400; - break; - case 2400: - default: - cflag |= B2400; - break; - } - switch (bits) { - case 7: - cflag |= CS7; - break; - default: - case 8: - cflag |= CS8; - break; - } - switch (parity) { - case 'o': - case 'O': - cflag |= PARODD; - break; - case 'e': - case 'E': - cflag |= PARENB; - break; - } - - serial_console_info = &cy_port[ints[1]]; - serial_console_cflag = cflag; - serial_console = ints[1] + 64; /*callout_driver.minor_start */ -} -#endif - -/* - * The following is probably out of date for 2.1.x serial console stuff. - * - * The console is registered early on from arch/m68k/kernel/setup.c, and - * it therefore relies on the chip being setup correctly by 166-Bug. This - * seems reasonable, as the serial port has been used to invoke the system - * boot. It also means that this function must not rely on any data - * initialisation performed by serial167_init() etc. - * - * Of course, once the console has been registered, we had better ensure - * that serial167_init() doesn't leave the chip non-functional. - * - * The console must be locked when we get here. - */ - -void serial167_console_write(struct console *co, const char *str, - unsigned count) -{ - volatile unsigned char *base_addr = (u_char *) BASE_ADDR; - unsigned long flags; - volatile u_char sink; - u_char ier; - int port; - u_char do_lf = 0; - int i = 0; - - local_irq_save(flags); - - /* Ensure transmitter is enabled! */ - - port = 0; - base_addr[CyCAR] = (u_char) port; - while (base_addr[CyCCR]) - ; - base_addr[CyCCR] = CyENB_XMTR; - - ier = base_addr[CyIER]; - base_addr[CyIER] = CyTxMpty; - - while (1) { - if (pcc2chip[PccSCCTICR] & 0x20) { - /* We have a Tx int. Acknowledge it */ - sink = pcc2chip[PccTPIACKR]; - if ((base_addr[CyLICR] >> 2) == port) { - if (i == count) { - /* Last char of string is now output */ - base_addr[CyTEOIR] = CyNOTRANS; - break; - } - if (do_lf) { - base_addr[CyTDR] = '\n'; - str++; - i++; - do_lf = 0; - } else if (*str == '\n') { - base_addr[CyTDR] = '\r'; - do_lf = 1; - } else { - base_addr[CyTDR] = *str++; - i++; - } - base_addr[CyTEOIR] = 0; - } else - base_addr[CyTEOIR] = CyNOTRANS; - } - } - - base_addr[CyIER] = ier; - - local_irq_restore(flags); -} - -static struct tty_driver *serial167_console_device(struct console *c, - int *index) -{ - *index = c->index; - return cy_serial_driver; -} - -static struct console sercons = { - .name = "ttyS", - .write = serial167_console_write, - .device = serial167_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init serial167_console_init(void) -{ - if (vme_brdtype == VME_TYPE_MVME166 || - vme_brdtype == VME_TYPE_MVME167 || - vme_brdtype == VME_TYPE_MVME177) { - mvme167_serial_console_setup(0); - register_console(&sercons); - } - return 0; -} - -console_initcall(serial167_console_init); - -MODULE_LICENSE("GPL"); diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c deleted file mode 100644 index 47e5753f732a..000000000000 --- a/drivers/char/specialix.c +++ /dev/null @@ -1,2368 +0,0 @@ -/* - * specialix.c -- specialix IO8+ multiport serial driver. - * - * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) - * - * Specialix pays for the development and support of this driver. - * Please DO contact io8-linux@specialix.co.uk if you require - * support. But please read the documentation (specialix.txt) - * first. - * - * This driver was developped in the BitWizard linux device - * driver service. If you require a linux device driver for your - * product, please contact devices@BitWizard.nl for a quote. - * - * This code is firmly based on the riscom/8 serial driver, - * written by Dmitry Gorodchanin. The specialix IO8+ card - * programming information was obtained from the CL-CD1865 Data - * Book, and Specialix document number 6200059: IO8+ Hardware - * Functional Specification. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - * Revision history: - * - * Revision 1.0: April 1st 1997. - * Initial release for alpha testing. - * Revision 1.1: April 14th 1997. - * Incorporated Richard Hudsons suggestions, - * removed some debugging printk's. - * Revision 1.2: April 15th 1997. - * Ported to 2.1.x kernels. - * Revision 1.3: April 17th 1997 - * Backported to 2.0. (Compatibility macros). - * Revision 1.4: April 18th 1997 - * Fixed DTR/RTS bug that caused the card to indicate - * "don't send data" to a modem after the password prompt. - * Fixed bug for premature (fake) interrupts. - * Revision 1.5: April 19th 1997 - * fixed a minor typo in the header file, cleanup a little. - * performance warnings are now MAXed at once per minute. - * Revision 1.6: May 23 1997 - * Changed the specialix=... format to include interrupt. - * Revision 1.7: May 27 1997 - * Made many more debug printk's a compile time option. - * Revision 1.8: Jul 1 1997 - * port to linux-2.1.43 kernel. - * Revision 1.9: Oct 9 1998 - * Added stuff for the IO8+/PCI version. - * Revision 1.10: Oct 22 1999 / Jan 21 2000. - * Added stuff for setserial. - * Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr) - * - */ - -#define VERSION "1.11" - - -/* - * There is a bunch of documentation about the card, jumpers, config - * settings, restrictions, cables, device names and numbers in - * Documentation/serial/specialix.txt - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "specialix_io8.h" -#include "cd1865.h" - - -/* - This driver can spew a whole lot of debugging output at you. If you - need maximum performance, you should disable the DEBUG define. To - aid in debugging in the field, I'm leaving the compile-time debug - features enabled, and disable them "runtime". That allows me to - instruct people with problems to enable debugging without requiring - them to recompile... -*/ -#define DEBUG - -static int sx_debug; -static int sx_rxfifo = SPECIALIX_RXFIFO; -static int sx_rtscts; - -#ifdef DEBUG -#define dprintk(f, str...) if (sx_debug & f) printk(str) -#else -#define dprintk(f, str...) /* nothing */ -#endif - -#define SX_DEBUG_FLOW 0x0001 -#define SX_DEBUG_DATA 0x0002 -#define SX_DEBUG_PROBE 0x0004 -#define SX_DEBUG_CHAN 0x0008 -#define SX_DEBUG_INIT 0x0010 -#define SX_DEBUG_RX 0x0020 -#define SX_DEBUG_TX 0x0040 -#define SX_DEBUG_IRQ 0x0080 -#define SX_DEBUG_OPEN 0x0100 -#define SX_DEBUG_TERMIOS 0x0200 -#define SX_DEBUG_SIGNALS 0x0400 -#define SX_DEBUG_FIFO 0x0800 - - -#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__) -#define func_exit() dprintk(SX_DEBUG_FLOW, "io8: exit %s\n", __func__) - - -/* Configurable options: */ - -/* Am I paranoid or not ? ;-) */ -#define SPECIALIX_PARANOIA_CHECK - -/* - * The following defines are mostly for testing purposes. But if you need - * some nice reporting in your syslog, you can define them also. - */ -#undef SX_REPORT_FIFO -#undef SX_REPORT_OVERRUN - - - - -#define SPECIALIX_LEGAL_FLAGS \ - (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ - ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ - ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) - -static struct tty_driver *specialix_driver; - -static struct specialix_board sx_board[SX_NBOARD] = { - { 0, SX_IOBASE1, 9, }, - { 0, SX_IOBASE2, 11, }, - { 0, SX_IOBASE3, 12, }, - { 0, SX_IOBASE4, 15, }, -}; - -static struct specialix_port sx_port[SX_NBOARD * SX_NPORT]; - - -static int sx_paranoia_check(struct specialix_port const *port, - char *name, const char *routine) -{ -#ifdef SPECIALIX_PARANOIA_CHECK - static const char *badmagic = KERN_ERR - "sx: Warning: bad specialix port magic number for device %s in %s\n"; - static const char *badinfo = KERN_ERR - "sx: Warning: null specialix port for device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != SPECIALIX_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - - -/* - * - * Service functions for specialix IO8+ driver. - * - */ - -/* Get board number from pointer */ -static inline int board_No(struct specialix_board *bp) -{ - return bp - sx_board; -} - - -/* Get port number from pointer */ -static inline int port_No(struct specialix_port const *port) -{ - return SX_PORT(port - sx_port); -} - - -/* Get pointer to board from pointer to port */ -static inline struct specialix_board *port_Board( - struct specialix_port const *port) -{ - return &sx_board[SX_BOARD(port - sx_port)]; -} - - -/* Input Byte from CL CD186x register */ -static inline unsigned char sx_in(struct specialix_board *bp, - unsigned short reg) -{ - bp->reg = reg | 0x80; - outb(reg | 0x80, bp->base + SX_ADDR_REG); - return inb(bp->base + SX_DATA_REG); -} - - -/* Output Byte to CL CD186x register */ -static inline void sx_out(struct specialix_board *bp, unsigned short reg, - unsigned char val) -{ - bp->reg = reg | 0x80; - outb(reg | 0x80, bp->base + SX_ADDR_REG); - outb(val, bp->base + SX_DATA_REG); -} - - -/* Input Byte from CL CD186x register */ -static inline unsigned char sx_in_off(struct specialix_board *bp, - unsigned short reg) -{ - bp->reg = reg; - outb(reg, bp->base + SX_ADDR_REG); - return inb(bp->base + SX_DATA_REG); -} - - -/* Output Byte to CL CD186x register */ -static inline void sx_out_off(struct specialix_board *bp, - unsigned short reg, unsigned char val) -{ - bp->reg = reg; - outb(reg, bp->base + SX_ADDR_REG); - outb(val, bp->base + SX_DATA_REG); -} - - -/* Wait for Channel Command Register ready */ -static void sx_wait_CCR(struct specialix_board *bp) -{ - unsigned long delay, flags; - unsigned char ccr; - - for (delay = SX_CCR_TIMEOUT; delay; delay--) { - spin_lock_irqsave(&bp->lock, flags); - ccr = sx_in(bp, CD186x_CCR); - spin_unlock_irqrestore(&bp->lock, flags); - if (!ccr) - return; - udelay(1); - } - - printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); -} - - -/* Wait for Channel Command Register ready */ -static void sx_wait_CCR_off(struct specialix_board *bp) -{ - unsigned long delay; - unsigned char crr; - unsigned long flags; - - for (delay = SX_CCR_TIMEOUT; delay; delay--) { - spin_lock_irqsave(&bp->lock, flags); - crr = sx_in_off(bp, CD186x_CCR); - spin_unlock_irqrestore(&bp->lock, flags); - if (!crr) - return; - udelay(1); - } - - printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); -} - - -/* - * specialix IO8+ IO range functions. - */ - -static int sx_request_io_range(struct specialix_board *bp) -{ - return request_region(bp->base, - bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE, - "specialix IO8+") == NULL; -} - - -static void sx_release_io_range(struct specialix_board *bp) -{ - release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ? - SX_PCI_IO_SPACE : SX_IO_SPACE); -} - - -/* Set the IRQ using the RTS lines that run to the PAL on the board.... */ -static int sx_set_irq(struct specialix_board *bp) -{ - int virq; - int i; - unsigned long flags; - - if (bp->flags & SX_BOARD_IS_PCI) - return 1; - switch (bp->irq) { - /* In the same order as in the docs... */ - case 15: - virq = 0; - break; - case 12: - virq = 1; - break; - case 11: - virq = 2; - break; - case 9: - virq = 3; - break; - default:printk(KERN_ERR - "Speclialix: cannot set irq to %d.\n", bp->irq); - return 0; - } - spin_lock_irqsave(&bp->lock, flags); - for (i = 0; i < 2; i++) { - sx_out(bp, CD186x_CAR, i); - sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0); - } - spin_unlock_irqrestore(&bp->lock, flags); - return 1; -} - - -/* Reset and setup CD186x chip */ -static int sx_init_CD186x(struct specialix_board *bp) -{ - unsigned long flags; - int scaler; - int rv = 1; - - func_enter(); - sx_wait_CCR_off(bp); /* Wait for CCR ready */ - spin_lock_irqsave(&bp->lock, flags); - sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */ - spin_unlock_irqrestore(&bp->lock, flags); - msleep(50); /* Delay 0.05 sec */ - spin_lock_irqsave(&bp->lock, flags); - sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */ - sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */ - sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT); /* Prio for modem intr */ - sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT); /* Prio for transmitter intr */ - sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */ - /* Set RegAckEn */ - sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN); - - /* Setting up prescaler. We need 4 ticks per 1 ms */ - scaler = SX_OSCFREQ/SPECIALIX_TPS; - - sx_out_off(bp, CD186x_PPRH, scaler >> 8); - sx_out_off(bp, CD186x_PPRL, scaler & 0xff); - spin_unlock_irqrestore(&bp->lock, flags); - - if (!sx_set_irq(bp)) { - /* Figure out how to pass this along... */ - printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq); - rv = 0; - } - - func_exit(); - return rv; -} - - -static int read_cross_byte(struct specialix_board *bp, int reg, int bit) -{ - int i; - int t; - unsigned long flags; - - spin_lock_irqsave(&bp->lock, flags); - for (i = 0, t = 0; i < 8; i++) { - sx_out_off(bp, CD186x_CAR, i); - if (sx_in_off(bp, reg) & bit) - t |= 1 << i; - } - spin_unlock_irqrestore(&bp->lock, flags); - - return t; -} - - -/* Main probing routine, also sets irq. */ -static int sx_probe(struct specialix_board *bp) -{ - unsigned char val1, val2; - int rev; - int chip; - - func_enter(); - - if (sx_request_io_range(bp)) { - func_exit(); - return 1; - } - - /* Are the I/O ports here ? */ - sx_out_off(bp, CD186x_PPRL, 0x5a); - udelay(1); - val1 = sx_in_off(bp, CD186x_PPRL); - - sx_out_off(bp, CD186x_PPRL, 0xa5); - udelay(1); - val2 = sx_in_off(bp, CD186x_PPRL); - - - if (val1 != 0x5a || val2 != 0xa5) { - printk(KERN_INFO - "sx%d: specialix IO8+ Board at 0x%03x not found.\n", - board_No(bp), bp->base); - sx_release_io_range(bp); - func_exit(); - return 1; - } - - /* Check the DSR lines that Specialix uses as board - identification */ - val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR); - val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS); - dprintk(SX_DEBUG_INIT, - "sx%d: DSR lines are: %02x, rts lines are: %02x\n", - board_No(bp), val1, val2); - - /* They managed to switch the bit order between the docs and - the IO8+ card. The new PCI card now conforms to old docs. - They changed the PCI docs to reflect the situation on the - old card. */ - val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2; - if (val1 != val2) { - printk(KERN_INFO - "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n", - board_No(bp), val2, bp->base, val1); - sx_release_io_range(bp); - func_exit(); - return 1; - } - - - /* Reset CD186x again */ - if (!sx_init_CD186x(bp)) { - sx_release_io_range(bp); - func_exit(); - return 1; - } - - sx_request_io_range(bp); - bp->flags |= SX_BOARD_PRESENT; - - /* Chip revcode pkgtype - GFRCR SRCR bit 7 - CD180 rev B 0x81 0 - CD180 rev C 0x82 0 - CD1864 rev A 0x82 1 - CD1865 rev A 0x83 1 -- Do not use!!! Does not work. - CD1865 rev B 0x84 1 - -- Thanks to Gwen Wang, Cirrus Logic. - */ - - switch (sx_in_off(bp, CD186x_GFRCR)) { - case 0x82: - chip = 1864; - rev = 'A'; - break; - case 0x83: - chip = 1865; - rev = 'A'; - break; - case 0x84: - chip = 1865; - rev = 'B'; - break; - case 0x85: - chip = 1865; - rev = 'C'; - break; /* Does not exist at this time */ - default: - chip = -1; - rev = 'x'; - } - - dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR)); - - printk(KERN_INFO - "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n", - board_No(bp), bp->base, bp->irq, chip, rev); - - func_exit(); - return 0; -} - -/* - * - * Interrupt processing routines. - * */ - -static struct specialix_port *sx_get_port(struct specialix_board *bp, - unsigned char const *what) -{ - unsigned char channel; - struct specialix_port *port = NULL; - - channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF; - dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel); - if (channel < CD186x_NCH) { - port = &sx_port[board_No(bp) * SX_NPORT + channel]; - dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n", - board_No(bp) * SX_NPORT + channel, port, - port->port.flags & ASYNC_INITIALIZED); - - if (port->port.flags & ASYNC_INITIALIZED) { - dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port); - func_exit(); - return port; - } - } - printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n", - board_No(bp), what, channel); - return NULL; -} - - -static void sx_receive_exc(struct specialix_board *bp) -{ - struct specialix_port *port; - struct tty_struct *tty; - unsigned char status; - unsigned char ch, flag; - - func_enter(); - - port = sx_get_port(bp, "Receive"); - if (!port) { - dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); - func_exit(); - return; - } - tty = port->port.tty; - - status = sx_in(bp, CD186x_RCSR); - - dprintk(SX_DEBUG_RX, "status: 0x%x\n", status); - if (status & RCSR_OE) { - port->overrun++; - dprintk(SX_DEBUG_FIFO, - "sx%d: port %d: Overrun. Total %ld overruns.\n", - board_No(bp), port_No(port), port->overrun); - } - status &= port->mark_mask; - - /* This flip buffer check needs to be below the reading of the - status register to reset the chip's IRQ.... */ - if (tty_buffer_request_room(tty, 1) == 0) { - dprintk(SX_DEBUG_FIFO, - "sx%d: port %d: Working around flip buffer overflow.\n", - board_No(bp), port_No(port)); - func_exit(); - return; - } - - ch = sx_in(bp, CD186x_RDR); - if (!status) { - func_exit(); - return; - } - if (status & RCSR_TOUT) { - printk(KERN_INFO - "sx%d: port %d: Receiver timeout. Hardware problems ?\n", - board_No(bp), port_No(port)); - func_exit(); - return; - - } else if (status & RCSR_BREAK) { - dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n", - board_No(bp), port_No(port)); - flag = TTY_BREAK; - if (port->port.flags & ASYNC_SAK) - do_SAK(tty); - - } else if (status & RCSR_PE) - flag = TTY_PARITY; - - else if (status & RCSR_FE) - flag = TTY_FRAME; - - else if (status & RCSR_OE) - flag = TTY_OVERRUN; - - else - flag = TTY_NORMAL; - - if (tty_insert_flip_char(tty, ch, flag)) - tty_flip_buffer_push(tty); - func_exit(); -} - - -static void sx_receive(struct specialix_board *bp) -{ - struct specialix_port *port; - struct tty_struct *tty; - unsigned char count; - - func_enter(); - - port = sx_get_port(bp, "Receive"); - if (port == NULL) { - dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); - func_exit(); - return; - } - tty = port->port.tty; - - count = sx_in(bp, CD186x_RDCR); - dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count); - port->hits[count > 8 ? 9 : count]++; - - while (count--) - tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL); - tty_flip_buffer_push(tty); - func_exit(); -} - - -static void sx_transmit(struct specialix_board *bp) -{ - struct specialix_port *port; - struct tty_struct *tty; - unsigned char count; - - func_enter(); - port = sx_get_port(bp, "Transmit"); - if (port == NULL) { - func_exit(); - return; - } - dprintk(SX_DEBUG_TX, "port: %p\n", port); - tty = port->port.tty; - - if (port->IER & IER_TXEMPTY) { - /* FIFO drained */ - sx_out(bp, CD186x_CAR, port_No(port)); - port->IER &= ~IER_TXEMPTY; - sx_out(bp, CD186x_IER, port->IER); - func_exit(); - return; - } - - if ((port->xmit_cnt <= 0 && !port->break_length) - || tty->stopped || tty->hw_stopped) { - sx_out(bp, CD186x_CAR, port_No(port)); - port->IER &= ~IER_TXRDY; - sx_out(bp, CD186x_IER, port->IER); - func_exit(); - return; - } - - if (port->break_length) { - if (port->break_length > 0) { - if (port->COR2 & COR2_ETC) { - sx_out(bp, CD186x_TDR, CD186x_C_ESC); - sx_out(bp, CD186x_TDR, CD186x_C_SBRK); - port->COR2 &= ~COR2_ETC; - } - count = min_t(int, port->break_length, 0xff); - sx_out(bp, CD186x_TDR, CD186x_C_ESC); - sx_out(bp, CD186x_TDR, CD186x_C_DELAY); - sx_out(bp, CD186x_TDR, count); - port->break_length -= count; - if (port->break_length == 0) - port->break_length--; - } else { - sx_out(bp, CD186x_TDR, CD186x_C_ESC); - sx_out(bp, CD186x_TDR, CD186x_C_EBRK); - sx_out(bp, CD186x_COR2, port->COR2); - sx_wait_CCR(bp); - sx_out(bp, CD186x_CCR, CCR_CORCHG2); - port->break_length = 0; - } - - func_exit(); - return; - } - - count = CD186x_NFIFO; - do { - sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]); - port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); - if (--port->xmit_cnt <= 0) - break; - } while (--count > 0); - - if (port->xmit_cnt <= 0) { - sx_out(bp, CD186x_CAR, port_No(port)); - port->IER &= ~IER_TXRDY; - sx_out(bp, CD186x_IER, port->IER); - } - if (port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); - - func_exit(); -} - - -static void sx_check_modem(struct specialix_board *bp) -{ - struct specialix_port *port; - struct tty_struct *tty; - unsigned char mcr; - int msvr_cd; - - dprintk(SX_DEBUG_SIGNALS, "Modem intr. "); - port = sx_get_port(bp, "Modem"); - if (port == NULL) - return; - - tty = port->port.tty; - - mcr = sx_in(bp, CD186x_MCR); - - if ((mcr & MCR_CDCHG)) { - dprintk(SX_DEBUG_SIGNALS, "CD just changed... "); - msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD; - if (msvr_cd) { - dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n"); - wake_up_interruptible(&port->port.open_wait); - } else { - dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n"); - tty_hangup(tty); - } - } - -#ifdef SPECIALIX_BRAIN_DAMAGED_CTS - if (mcr & MCR_CTSCHG) { - if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) { - tty->hw_stopped = 0; - port->IER |= IER_TXRDY; - if (port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); - } else { - tty->hw_stopped = 1; - port->IER &= ~IER_TXRDY; - } - sx_out(bp, CD186x_IER, port->IER); - } - if (mcr & MCR_DSSXHG) { - if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) { - tty->hw_stopped = 0; - port->IER |= IER_TXRDY; - if (port->xmit_cnt <= port->wakeup_chars) - tty_wakeup(tty); - } else { - tty->hw_stopped = 1; - port->IER &= ~IER_TXRDY; - } - sx_out(bp, CD186x_IER, port->IER); - } -#endif /* SPECIALIX_BRAIN_DAMAGED_CTS */ - - /* Clear change bits */ - sx_out(bp, CD186x_MCR, 0); -} - - -/* The main interrupt processing routine */ -static irqreturn_t sx_interrupt(int dummy, void *dev_id) -{ - unsigned char status; - unsigned char ack; - struct specialix_board *bp = dev_id; - unsigned long loop = 0; - int saved_reg; - unsigned long flags; - - func_enter(); - - spin_lock_irqsave(&bp->lock, flags); - - dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, - port_No(sx_get_port(bp, "INT")), - SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1); - if (!(bp->flags & SX_BOARD_ACTIVE)) { - dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", - bp->irq); - spin_unlock_irqrestore(&bp->lock, flags); - func_exit(); - return IRQ_NONE; - } - - saved_reg = bp->reg; - - while (++loop < 16) { - status = sx_in(bp, CD186x_SRSR) & - (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint); - if (status == 0) - break; - if (status & SRSR_RREQint) { - ack = sx_in(bp, CD186x_RRAR); - - if (ack == (SX_ID | GIVR_IT_RCV)) - sx_receive(bp); - else if (ack == (SX_ID | GIVR_IT_REXC)) - sx_receive_exc(bp); - else - printk(KERN_ERR - "sx%d: status: 0x%x Bad receive ack 0x%02x.\n", - board_No(bp), status, ack); - - } else if (status & SRSR_TREQint) { - ack = sx_in(bp, CD186x_TRAR); - - if (ack == (SX_ID | GIVR_IT_TX)) - sx_transmit(bp); - else - printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n", - board_No(bp), status, ack, - port_No(sx_get_port(bp, "Int"))); - } else if (status & SRSR_MREQint) { - ack = sx_in(bp, CD186x_MRAR); - - if (ack == (SX_ID | GIVR_IT_MODEM)) - sx_check_modem(bp); - else - printk(KERN_ERR - "sx%d: status: 0x%x Bad modem ack 0x%02x.\n", - board_No(bp), status, ack); - - } - - sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */ - } - bp->reg = saved_reg; - outb(bp->reg, bp->base + SX_ADDR_REG); - spin_unlock_irqrestore(&bp->lock, flags); - func_exit(); - return IRQ_HANDLED; -} - - -/* - * Routines for open & close processing. - */ - -static void turn_ints_off(struct specialix_board *bp) -{ - unsigned long flags; - - func_enter(); - spin_lock_irqsave(&bp->lock, flags); - (void) sx_in_off(bp, 0); /* Turn off interrupts. */ - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - -static void turn_ints_on(struct specialix_board *bp) -{ - unsigned long flags; - - func_enter(); - - spin_lock_irqsave(&bp->lock, flags); - (void) sx_in(bp, 0); /* Turn ON interrupts. */ - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - - -/* Called with disabled interrupts */ -static int sx_setup_board(struct specialix_board *bp) -{ - int error; - - if (bp->flags & SX_BOARD_ACTIVE) - return 0; - - if (bp->flags & SX_BOARD_IS_PCI) - error = request_irq(bp->irq, sx_interrupt, - IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp); - else - error = request_irq(bp->irq, sx_interrupt, - IRQF_DISABLED, "specialix IO8+", bp); - - if (error) - return error; - - turn_ints_on(bp); - bp->flags |= SX_BOARD_ACTIVE; - - return 0; -} - - -/* Called with disabled interrupts */ -static void sx_shutdown_board(struct specialix_board *bp) -{ - func_enter(); - - if (!(bp->flags & SX_BOARD_ACTIVE)) { - func_exit(); - return; - } - - bp->flags &= ~SX_BOARD_ACTIVE; - - dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n", - bp->irq, board_No(bp)); - free_irq(bp->irq, bp); - turn_ints_off(bp); - func_exit(); -} - -static unsigned int sx_crtscts(struct tty_struct *tty) -{ - if (sx_rtscts) - return C_CRTSCTS(tty); - return 1; -} - -/* - * Setting up port characteristics. - * Must be called with disabled interrupts - */ -static void sx_change_speed(struct specialix_board *bp, - struct specialix_port *port) -{ - struct tty_struct *tty; - unsigned long baud; - long tmp; - unsigned char cor1 = 0, cor3 = 0; - unsigned char mcor1 = 0, mcor2 = 0; - static unsigned long again; - unsigned long flags; - - func_enter(); - - tty = port->port.tty; - if (!tty || !tty->termios) { - func_exit(); - return; - } - - port->IER = 0; - port->COR2 = 0; - /* Select port on the board */ - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - - /* The Specialix board doens't implement the RTS lines. - They are used to set the IRQ level. Don't touch them. */ - if (sx_crtscts(tty)) - port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); - else - port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS); - spin_unlock_irqrestore(&bp->lock, flags); - dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR); - baud = tty_get_baud_rate(tty); - - if (baud == 38400) { - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baud = 57600; - if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baud = 115200; - } - - if (!baud) { - /* Drop DTR & exit */ - dprintk(SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n"); - if (!sx_crtscts(tty)) { - port->MSVR &= ~MSVR_DTR; - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock_irqrestore(&bp->lock, flags); - } else - dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n"); - return; - } else { - /* Set DTR on */ - if (!sx_crtscts(tty)) - port->MSVR |= MSVR_DTR; - } - - /* - * Now we must calculate some speed depended things - */ - - /* Set baud rate for port */ - tmp = port->custom_divisor ; - if (tmp) - printk(KERN_INFO - "sx%d: Using custom baud rate divisor %ld. \n" - "This is an untested option, please be careful.\n", - port_No(port), tmp); - else - tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) / - CD186x_TPC); - - if (tmp < 0x10 && time_before(again, jiffies)) { - again = jiffies + HZ * 60; - /* Page 48 of version 2.0 of the CL-CD1865 databook */ - if (tmp >= 12) { - printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" - "Performance degradation is possible.\n" - "Read specialix.txt for more info.\n", - port_No(port), tmp); - } else { - printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" - "Warning: overstressing Cirrus chip. This might not work.\n" - "Read specialix.txt for more info.\n", port_No(port), tmp); - } - } - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff); - sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff); - sx_out(bp, CD186x_RBPRL, tmp & 0xff); - sx_out(bp, CD186x_TBPRL, tmp & 0xff); - spin_unlock_irqrestore(&bp->lock, flags); - if (port->custom_divisor) - baud = (SX_OSCFREQ + port->custom_divisor/2) / - port->custom_divisor; - baud = (baud + 5) / 10; /* Estimated CPS */ - - /* Two timer ticks seems enough to wakeup something like SLIP driver */ - tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; - port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? - SERIAL_XMIT_SIZE - 1 : tmp); - - /* Receiver timeout will be transmission time for 1.5 chars */ - tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud; - tmp = (tmp > 0xff) ? 0xff : tmp; - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_RTPR, tmp); - spin_unlock_irqrestore(&bp->lock, flags); - switch (C_CSIZE(tty)) { - case CS5: - cor1 |= COR1_5BITS; - break; - case CS6: - cor1 |= COR1_6BITS; - break; - case CS7: - cor1 |= COR1_7BITS; - break; - case CS8: - cor1 |= COR1_8BITS; - break; - } - - if (C_CSTOPB(tty)) - cor1 |= COR1_2SB; - - cor1 |= COR1_IGNORE; - if (C_PARENB(tty)) { - cor1 |= COR1_NORMPAR; - if (C_PARODD(tty)) - cor1 |= COR1_ODDP; - if (I_INPCK(tty)) - cor1 &= ~COR1_IGNORE; - } - /* Set marking of some errors */ - port->mark_mask = RCSR_OE | RCSR_TOUT; - if (I_INPCK(tty)) - port->mark_mask |= RCSR_FE | RCSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) - port->mark_mask |= RCSR_BREAK; - if (I_IGNPAR(tty)) - port->mark_mask &= ~(RCSR_FE | RCSR_PE); - if (I_IGNBRK(tty)) { - port->mark_mask &= ~RCSR_BREAK; - if (I_IGNPAR(tty)) - /* Real raw mode. Ignore all */ - port->mark_mask &= ~RCSR_OE; - } - /* Enable Hardware Flow Control */ - if (C_CRTSCTS(tty)) { -#ifdef SPECIALIX_BRAIN_DAMAGED_CTS - port->IER |= IER_DSR | IER_CTS; - mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; - mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; - spin_lock_irqsave(&bp->lock, flags); - tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & - (MSVR_CTS|MSVR_DSR)); - spin_unlock_irqrestore(&bp->lock, flags); -#else - port->COR2 |= COR2_CTSAE; -#endif - } - /* Enable Software Flow Control. FIXME: I'm not sure about this */ - /* Some people reported that it works, but I still doubt it */ - if (I_IXON(tty)) { - port->COR2 |= COR2_TXIBE; - cor3 |= (COR3_FCT | COR3_SCDE); - if (I_IXANY(tty)) - port->COR2 |= COR2_IXM; - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_SCHR1, START_CHAR(tty)); - sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty)); - sx_out(bp, CD186x_SCHR3, START_CHAR(tty)); - sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty)); - spin_unlock_irqrestore(&bp->lock, flags); - } - if (!C_CLOCAL(tty)) { - /* Enable CD check */ - port->IER |= IER_CD; - mcor1 |= MCOR1_CDZD; - mcor2 |= MCOR2_CDOD; - } - - if (C_CREAD(tty)) - /* Enable receiver */ - port->IER |= IER_RXD; - - /* Set input FIFO size (1-8 bytes) */ - cor3 |= sx_rxfifo; - /* Setting up CD186x channel registers */ - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_COR1, cor1); - sx_out(bp, CD186x_COR2, port->COR2); - sx_out(bp, CD186x_COR3, cor3); - spin_unlock_irqrestore(&bp->lock, flags); - /* Make CD186x know about registers change */ - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); - /* Setting up modem option registers */ - dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", - mcor1, mcor2); - sx_out(bp, CD186x_MCOR1, mcor1); - sx_out(bp, CD186x_MCOR2, mcor2); - spin_unlock_irqrestore(&bp->lock, flags); - /* Enable CD186x transmitter & receiver */ - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN); - /* Enable interrupts */ - sx_out(bp, CD186x_IER, port->IER); - /* And finally set the modem lines... */ - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - - -/* Must be called with interrupts enabled */ -static int sx_setup_port(struct specialix_board *bp, - struct specialix_port *port) -{ - unsigned long flags; - - func_enter(); - - if (port->port.flags & ASYNC_INITIALIZED) { - func_exit(); - return 0; - } - - if (!port->xmit_buf) { - /* We may sleep in get_zeroed_page() */ - unsigned long tmp; - - tmp = get_zeroed_page(GFP_KERNEL); - if (tmp == 0L) { - func_exit(); - return -ENOMEM; - } - - if (port->xmit_buf) { - free_page(tmp); - func_exit(); - return -ERESTARTSYS; - } - port->xmit_buf = (unsigned char *) tmp; - } - - spin_lock_irqsave(&port->lock, flags); - - if (port->port.tty) - clear_bit(TTY_IO_ERROR, &port->port.tty->flags); - - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - sx_change_speed(bp, port); - port->port.flags |= ASYNC_INITIALIZED; - - spin_unlock_irqrestore(&port->lock, flags); - - - func_exit(); - return 0; -} - - -/* Must be called with interrupts disabled */ -static void sx_shutdown_port(struct specialix_board *bp, - struct specialix_port *port) -{ - struct tty_struct *tty; - int i; - unsigned long flags; - - func_enter(); - - if (!(port->port.flags & ASYNC_INITIALIZED)) { - func_exit(); - return; - } - - if (sx_debug & SX_DEBUG_FIFO) { - dprintk(SX_DEBUG_FIFO, - "sx%d: port %d: %ld overruns, FIFO hits [ ", - board_No(bp), port_No(port), port->overrun); - for (i = 0; i < 10; i++) - dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]); - dprintk(SX_DEBUG_FIFO, "].\n"); - } - - if (port->xmit_buf) { - free_page((unsigned long) port->xmit_buf); - port->xmit_buf = NULL; - } - - /* Select port */ - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - - tty = port->port.tty; - if (tty == NULL || C_HUPCL(tty)) { - /* Drop DTR */ - sx_out(bp, CD186x_MSVDTR, 0); - } - spin_unlock_irqrestore(&bp->lock, flags); - /* Reset port */ - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_SOFTRESET); - /* Disable all interrupts from this port */ - port->IER = 0; - sx_out(bp, CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); - port->port.flags &= ~ASYNC_INITIALIZED; - - if (!bp->count) - sx_shutdown_board(bp); - func_exit(); -} - - -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct specialix_port *port) -{ - DECLARE_WAITQUEUE(wait, current); - struct specialix_board *bp = port_Board(port); - int retval; - int do_clocal = 0; - int CD; - unsigned long flags; - - func_enter(); - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) { - func_exit(); - return -EAGAIN; - } else { - func_exit(); - return -ERESTARTSYS; - } - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; - func_exit(); - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count--; - spin_unlock_irqrestore(&port->lock, flags); - port->port.blocked_open++; - while (1) { - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - CD = sx_in(bp, CD186x_MSVR) & MSVR_CD; - if (sx_crtscts(tty)) { - /* Activate RTS */ - port->MSVR |= MSVR_DTR; /* WTF? */ - sx_out(bp, CD186x_MSVR, port->MSVR); - } else { - /* Activate DTR */ - port->MSVR |= MSVR_DTR; - sx_out(bp, CD186x_MSVR, port->MSVR); - } - spin_unlock_irqrestore(&bp->lock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - tty_unlock(); - schedule(); - tty_lock(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - spin_unlock_irqrestore(&port->lock, flags); - if (retval) { - func_exit(); - return retval; - } - - port->port.flags |= ASYNC_NORMAL_ACTIVE; - func_exit(); - return 0; -} - - -static int sx_open(struct tty_struct *tty, struct file *filp) -{ - int board; - int error; - struct specialix_port *port; - struct specialix_board *bp; - int i; - unsigned long flags; - - func_enter(); - - board = SX_BOARD(tty->index); - - if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) { - func_exit(); - return -ENODEV; - } - - bp = &sx_board[board]; - port = sx_port + board * SX_NPORT + SX_PORT(tty->index); - port->overrun = 0; - for (i = 0; i < 10; i++) - port->hits[i] = 0; - - dprintk(SX_DEBUG_OPEN, - "Board = %d, bp = %p, port = %p, portno = %d.\n", - board, bp, port, SX_PORT(tty->index)); - - if (sx_paranoia_check(port, tty->name, "sx_open")) { - func_enter(); - return -ENODEV; - } - - error = sx_setup_board(bp); - if (error) { - func_exit(); - return error; - } - - spin_lock_irqsave(&bp->lock, flags); - port->port.count++; - bp->count++; - tty->driver_data = port; - port->port.tty = tty; - spin_unlock_irqrestore(&bp->lock, flags); - - error = sx_setup_port(bp, port); - if (error) { - func_enter(); - return error; - } - - error = block_til_ready(tty, filp, port); - if (error) { - func_enter(); - return error; - } - - func_exit(); - return 0; -} - -static void sx_flush_buffer(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) { - func_exit(); - return; - } - - bp = port_Board(port); - spin_lock_irqsave(&port->lock, flags); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore(&port->lock, flags); - tty_wakeup(tty); - - func_exit(); -} - -static void sx_close(struct tty_struct *tty, struct file *filp) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - unsigned long timeout; - - func_enter(); - if (!port || sx_paranoia_check(port, tty->name, "close")) { - func_exit(); - return; - } - spin_lock_irqsave(&port->lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->lock, flags); - func_exit(); - return; - } - - bp = port_Board(port); - if (tty->count == 1 && port->port.count != 1) { - printk(KERN_ERR "sx%d: sx_close: bad port count;" - " tty->count is 1, port count is %d\n", - board_No(bp), port->port.count); - port->port.count = 1; - } - - if (port->port.count > 1) { - port->port.count--; - bp->count--; - - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); - return; - } - port->port.flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - spin_unlock_irqrestore(&port->lock, flags); - dprintk(SX_DEBUG_OPEN, "Closing\n"); - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - dprintk(SX_DEBUG_OPEN, "Closed\n"); - port->IER &= ~IER_RXD; - if (port->port.flags & ASYNC_INITIALIZED) { - port->IER &= ~IER_TXRDY; - port->IER |= IER_TXEMPTY; - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies+HZ; - while (port->IER & IER_TXEMPTY) { - set_current_state(TASK_INTERRUPTIBLE); - msleep_interruptible(jiffies_to_msecs(port->timeout)); - if (time_after(jiffies, timeout)) { - printk(KERN_INFO "Timeout waiting for close\n"); - break; - } - } - - } - - if (--bp->count < 0) { - printk(KERN_ERR - "sx%d: sx_shutdown_port: bad board count: %d port: %d\n", - board_No(bp), bp->count, tty->index); - bp->count = 0; - } - if (--port->port.count < 0) { - printk(KERN_ERR - "sx%d: sx_close: bad port count for tty%d: %d\n", - board_No(bp), port_No(port), port->port.count); - port->port.count = 0; - } - - sx_shutdown_port(bp, port); - sx_flush_buffer(tty); - tty_ldisc_flush(tty); - spin_lock_irqsave(&port->lock, flags); - tty->closing = 0; - port->port.tty = NULL; - spin_unlock_irqrestore(&port->lock, flags); - if (port->port.blocked_open) { - if (port->port.close_delay) - msleep_interruptible( - jiffies_to_msecs(port->port.close_delay)); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - - func_exit(); -} - - -static int sx_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - int c, total = 0; - unsigned long flags; - - func_enter(); - if (sx_paranoia_check(port, tty->name, "sx_write")) { - func_exit(); - return 0; - } - - bp = port_Board(port); - - if (!port->xmit_buf) { - func_exit(); - return 0; - } - - while (1) { - spin_lock_irqsave(&port->lock, flags); - c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, - SERIAL_XMIT_SIZE - port->xmit_head)); - if (c <= 0) { - spin_unlock_irqrestore(&port->lock, flags); - break; - } - memcpy(port->xmit_buf + port->xmit_head, buf, c); - port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - port->xmit_cnt += c; - spin_unlock_irqrestore(&port->lock, flags); - - buf += c; - count -= c; - total += c; - } - - spin_lock_irqsave(&bp->lock, flags); - if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && - !(port->IER & IER_TXRDY)) { - port->IER |= IER_TXRDY; - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_IER, port->IER); - } - spin_unlock_irqrestore(&bp->lock, flags); - func_exit(); - - return total; -} - - -static int sx_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_put_char")) { - func_exit(); - return 0; - } - dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf); - if (!port->xmit_buf) { - func_exit(); - return 0; - } - bp = port_Board(port); - spin_lock_irqsave(&port->lock, flags); - - dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", - port->xmit_cnt, port->xmit_buf); - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) { - spin_unlock_irqrestore(&port->lock, flags); - dprintk(SX_DEBUG_TX, "Exit size\n"); - func_exit(); - return 0; - } - dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf); - port->xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= SERIAL_XMIT_SIZE - 1; - port->xmit_cnt++; - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); - return 1; -} - - -static void sx_flush_chars(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp = port_Board(port); - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) { - func_exit(); - return; - } - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !port->xmit_buf) { - func_exit(); - return; - } - spin_lock_irqsave(&bp->lock, flags); - port->IER |= IER_TXRDY; - sx_out(port_Board(port), CD186x_CAR, port_No(port)); - sx_out(port_Board(port), CD186x_IER, port->IER); - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - - -static int sx_write_room(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - int ret; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_write_room")) { - func_exit(); - return 0; - } - - ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (ret < 0) - ret = 0; - - func_exit(); - return ret; -} - - -static int sx_chars_in_buffer(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) { - func_exit(); - return 0; - } - func_exit(); - return port->xmit_cnt; -} - -static int sx_tiocmget(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned char status; - unsigned int result; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, __func__)) { - func_exit(); - return -ENODEV; - } - - bp = port_Board(port); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - status = sx_in(bp, CD186x_MSVR); - spin_unlock_irqrestore(&bp->lock, flags); - dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n", - port_No(port), status, sx_in(bp, CD186x_CAR)); - dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port); - if (sx_crtscts(port->port.tty)) { - result = TIOCM_DTR | TIOCM_DSR - | ((status & MSVR_DTR) ? TIOCM_RTS : 0) - | ((status & MSVR_CD) ? TIOCM_CAR : 0) - | ((status & MSVR_CTS) ? TIOCM_CTS : 0); - } else { - result = TIOCM_RTS | TIOCM_DSR - | ((status & MSVR_DTR) ? TIOCM_DTR : 0) - | ((status & MSVR_CD) ? TIOCM_CAR : 0) - | ((status & MSVR_CTS) ? TIOCM_CTS : 0); - } - - func_exit(); - - return result; -} - - -static int sx_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, __func__)) { - func_exit(); - return -ENODEV; - } - - bp = port_Board(port); - - spin_lock_irqsave(&port->lock, flags); - if (sx_crtscts(port->port.tty)) { - if (set & TIOCM_RTS) - port->MSVR |= MSVR_DTR; - } else { - if (set & TIOCM_DTR) - port->MSVR |= MSVR_DTR; - } - if (sx_crtscts(port->port.tty)) { - if (clear & TIOCM_RTS) - port->MSVR &= ~MSVR_DTR; - } else { - if (clear & TIOCM_DTR) - port->MSVR &= ~MSVR_DTR; - } - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock(&bp->lock); - spin_unlock_irqrestore(&port->lock, flags); - func_exit(); - return 0; -} - - -static int sx_send_break(struct tty_struct *tty, int length) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp = port_Board(port); - unsigned long flags; - - func_enter(); - if (length == 0 || length == -1) - return -EOPNOTSUPP; - - spin_lock_irqsave(&port->lock, flags); - port->break_length = SPECIALIX_TPS / HZ * length; - port->COR2 |= COR2_ETC; - port->IER |= IER_TXRDY; - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_COR2, port->COR2); - sx_out(bp, CD186x_IER, port->IER); - spin_unlock(&bp->lock); - spin_unlock_irqrestore(&port->lock, flags); - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_CORCHG2); - spin_unlock_irqrestore(&bp->lock, flags); - sx_wait_CCR(bp); - - func_exit(); - return 0; -} - - -static int sx_set_serial_info(struct specialix_port *port, - struct serial_struct __user *newinfo) -{ - struct serial_struct tmp; - struct specialix_board *bp = port_Board(port); - int change_speed; - - func_enter(); - - if (copy_from_user(&tmp, newinfo, sizeof(tmp))) { - func_enter(); - return -EFAULT; - } - - mutex_lock(&port->port.mutex); - change_speed = ((port->port.flags & ASYNC_SPD_MASK) != - (tmp.flags & ASYNC_SPD_MASK)); - change_speed |= (tmp.custom_divisor != port->custom_divisor); - - if (!capable(CAP_SYS_ADMIN)) { - if ((tmp.close_delay != port->port.close_delay) || - (tmp.closing_wait != port->port.closing_wait) || - ((tmp.flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) { - func_exit(); - mutex_unlock(&port->port.mutex); - return -EPERM; - } - port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | - (tmp.flags & ASYNC_USR_MASK)); - port->custom_divisor = tmp.custom_divisor; - } else { - port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | - (tmp.flags & ASYNC_FLAGS)); - port->port.close_delay = tmp.close_delay; - port->port.closing_wait = tmp.closing_wait; - port->custom_divisor = tmp.custom_divisor; - } - if (change_speed) - sx_change_speed(bp, port); - - func_exit(); - mutex_unlock(&port->port.mutex); - return 0; -} - - -static int sx_get_serial_info(struct specialix_port *port, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - struct specialix_board *bp = port_Board(port); - - func_enter(); - - memset(&tmp, 0, sizeof(tmp)); - mutex_lock(&port->port.mutex); - tmp.type = PORT_CIRRUS; - tmp.line = port - sx_port; - tmp.port = bp->base; - tmp.irq = bp->irq; - tmp.flags = port->port.flags; - tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC; - tmp.close_delay = port->port.close_delay * HZ/100; - tmp.closing_wait = port->port.closing_wait * HZ/100; - tmp.custom_divisor = port->custom_divisor; - tmp.xmit_fifo_size = CD186x_NFIFO; - mutex_unlock(&port->port.mutex); - if (copy_to_user(retinfo, &tmp, sizeof(tmp))) { - func_exit(); - return -EFAULT; - } - - func_exit(); - return 0; -} - - -static int sx_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct specialix_port *port = tty->driver_data; - void __user *argp = (void __user *)arg; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_ioctl")) { - func_exit(); - return -ENODEV; - } - - switch (cmd) { - case TIOCGSERIAL: - func_exit(); - return sx_get_serial_info(port, argp); - case TIOCSSERIAL: - func_exit(); - return sx_set_serial_info(port, argp); - default: - func_exit(); - return -ENOIOCTLCMD; - } - func_exit(); - return 0; -} - - -static void sx_throttle(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_throttle")) { - func_exit(); - return; - } - - bp = port_Board(port); - - /* Use DTR instead of RTS ! */ - if (sx_crtscts(tty)) - port->MSVR &= ~MSVR_DTR; - else { - /* Auch!!! I think the system shouldn't call this then. */ - /* Or maybe we're supposed (allowed?) to do our side of hw - handshake anyway, even when hardware handshake is off. - When you see this in your logs, please report.... */ - printk(KERN_ERR - "sx%d: Need to throttle, but can't (hardware hs is off)\n", - port_No(port)); - } - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CAR, port_No(port)); - spin_unlock_irqrestore(&bp->lock, flags); - if (I_IXOFF(tty)) { - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_SSCH2); - spin_unlock_irqrestore(&bp->lock, flags); - sx_wait_CCR(bp); - } - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock_irqrestore(&bp->lock, flags); - - func_exit(); -} - - -static void sx_unthrottle(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) { - func_exit(); - return; - } - - bp = port_Board(port); - - spin_lock_irqsave(&port->lock, flags); - /* XXXX Use DTR INSTEAD???? */ - if (sx_crtscts(tty)) - port->MSVR |= MSVR_DTR; - /* Else clause: see remark in "sx_throttle"... */ - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - spin_unlock(&bp->lock); - if (I_IXOFF(tty)) { - spin_unlock_irqrestore(&port->lock, flags); - sx_wait_CCR(bp); - spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_CCR, CCR_SSCH1); - spin_unlock_irqrestore(&bp->lock, flags); - sx_wait_CCR(bp); - spin_lock_irqsave(&port->lock, flags); - } - spin_lock(&bp->lock); - sx_out(bp, CD186x_MSVR, port->MSVR); - spin_unlock(&bp->lock); - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); -} - - -static void sx_stop(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_stop")) { - func_exit(); - return; - } - - bp = port_Board(port); - - spin_lock_irqsave(&port->lock, flags); - port->IER &= ~IER_TXRDY; - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_IER, port->IER); - spin_unlock(&bp->lock); - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); -} - - -static void sx_start(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_start")) { - func_exit(); - return; - } - - bp = port_Board(port); - - spin_lock_irqsave(&port->lock, flags); - if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { - port->IER |= IER_TXRDY; - spin_lock(&bp->lock); - sx_out(bp, CD186x_CAR, port_No(port)); - sx_out(bp, CD186x_IER, port->IER); - spin_unlock(&bp->lock); - } - spin_unlock_irqrestore(&port->lock, flags); - - func_exit(); -} - -static void sx_hangup(struct tty_struct *tty) -{ - struct specialix_port *port = tty->driver_data; - struct specialix_board *bp; - unsigned long flags; - - func_enter(); - - if (sx_paranoia_check(port, tty->name, "sx_hangup")) { - func_exit(); - return; - } - - bp = port_Board(port); - - sx_shutdown_port(bp, port); - spin_lock_irqsave(&port->lock, flags); - bp->count -= port->port.count; - if (bp->count < 0) { - printk(KERN_ERR - "sx%d: sx_hangup: bad board count: %d port: %d\n", - board_No(bp), bp->count, tty->index); - bp->count = 0; - } - port->port.count = 0; - port->port.flags &= ~ASYNC_NORMAL_ACTIVE; - port->port.tty = NULL; - spin_unlock_irqrestore(&port->lock, flags); - wake_up_interruptible(&port->port.open_wait); - - func_exit(); -} - - -static void sx_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct specialix_port *port = tty->driver_data; - unsigned long flags; - struct specialix_board *bp; - - if (sx_paranoia_check(port, tty->name, "sx_set_termios")) - return; - - bp = port_Board(port); - spin_lock_irqsave(&port->lock, flags); - sx_change_speed(port_Board(port), port); - spin_unlock_irqrestore(&port->lock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - sx_start(tty); - } -} - -static const struct tty_operations sx_ops = { - .open = sx_open, - .close = sx_close, - .write = sx_write, - .put_char = sx_put_char, - .flush_chars = sx_flush_chars, - .write_room = sx_write_room, - .chars_in_buffer = sx_chars_in_buffer, - .flush_buffer = sx_flush_buffer, - .ioctl = sx_ioctl, - .throttle = sx_throttle, - .unthrottle = sx_unthrottle, - .set_termios = sx_set_termios, - .stop = sx_stop, - .start = sx_start, - .hangup = sx_hangup, - .tiocmget = sx_tiocmget, - .tiocmset = sx_tiocmset, - .break_ctl = sx_send_break, -}; - -static int sx_init_drivers(void) -{ - int error; - int i; - - func_enter(); - - specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT); - if (!specialix_driver) { - printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n"); - func_exit(); - return 1; - } - - specialix_driver->owner = THIS_MODULE; - specialix_driver->name = "ttyW"; - specialix_driver->major = SPECIALIX_NORMAL_MAJOR; - specialix_driver->type = TTY_DRIVER_TYPE_SERIAL; - specialix_driver->subtype = SERIAL_TYPE_NORMAL; - specialix_driver->init_termios = tty_std_termios; - specialix_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - specialix_driver->init_termios.c_ispeed = 9600; - specialix_driver->init_termios.c_ospeed = 9600; - specialix_driver->flags = TTY_DRIVER_REAL_RAW | - TTY_DRIVER_HARDWARE_BREAK; - tty_set_operations(specialix_driver, &sx_ops); - - error = tty_register_driver(specialix_driver); - if (error) { - put_tty_driver(specialix_driver); - printk(KERN_ERR - "sx: Couldn't register specialix IO8+ driver, error = %d\n", - error); - func_exit(); - return 1; - } - memset(sx_port, 0, sizeof(sx_port)); - for (i = 0; i < SX_NPORT * SX_NBOARD; i++) { - sx_port[i].magic = SPECIALIX_MAGIC; - tty_port_init(&sx_port[i].port); - spin_lock_init(&sx_port[i].lock); - } - - func_exit(); - return 0; -} - -static void sx_release_drivers(void) -{ - func_enter(); - - tty_unregister_driver(specialix_driver); - put_tty_driver(specialix_driver); - func_exit(); -} - -/* - * This routine must be called by kernel at boot time - */ -static int __init specialix_init(void) -{ - int i; - int found = 0; - - func_enter(); - - printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n"); - printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n"); - if (sx_rtscts) - printk(KERN_INFO - "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); - else - printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n"); - - for (i = 0; i < SX_NBOARD; i++) - spin_lock_init(&sx_board[i].lock); - - if (sx_init_drivers()) { - func_exit(); - return -EIO; - } - - for (i = 0; i < SX_NBOARD; i++) - if (sx_board[i].base && !sx_probe(&sx_board[i])) - found++; - -#ifdef CONFIG_PCI - { - struct pci_dev *pdev = NULL; - - i = 0; - while (i < SX_NBOARD) { - if (sx_board[i].flags & SX_BOARD_PRESENT) { - i++; - continue; - } - pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, - PCI_DEVICE_ID_SPECIALIX_IO8, pdev); - if (!pdev) - break; - - if (pci_enable_device(pdev)) - continue; - - sx_board[i].irq = pdev->irq; - - sx_board[i].base = pci_resource_start(pdev, 2); - - sx_board[i].flags |= SX_BOARD_IS_PCI; - if (!sx_probe(&sx_board[i])) - found++; - } - /* May exit pci_get sequence early with lots of boards */ - if (pdev != NULL) - pci_dev_put(pdev); - } -#endif - - if (!found) { - sx_release_drivers(); - printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n"); - func_exit(); - return -EIO; - } - - func_exit(); - return 0; -} - -static int iobase[SX_NBOARD] = {0,}; -static int irq[SX_NBOARD] = {0,}; - -module_param_array(iobase, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param(sx_debug, int, 0); -module_param(sx_rtscts, int, 0); -module_param(sx_rxfifo, int, 0); - -/* - * You can setup up to 4 boards. - * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter. - * You should specify the IRQs too in that case "irq=....,...". - * - * More than 4 boards in one computer is not possible, as the card can - * only use 4 different interrupts. - * - */ -static int __init specialix_init_module(void) -{ - int i; - - func_enter(); - - if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) { - for (i = 0; i < SX_NBOARD; i++) { - sx_board[i].base = iobase[i]; - sx_board[i].irq = irq[i]; - sx_board[i].count = 0; - } - } - - func_exit(); - - return specialix_init(); -} - -static void __exit specialix_exit_module(void) -{ - int i; - - func_enter(); - - sx_release_drivers(); - for (i = 0; i < SX_NBOARD; i++) - if (sx_board[i].flags & SX_BOARD_PRESENT) - sx_release_io_range(&sx_board[i]); - func_exit(); -} - -static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = { - { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) }, - { } -}; -MODULE_DEVICE_TABLE(pci, specialx_pci_tbl); - -module_init(specialix_init_module); -module_exit(specialix_exit_module); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR); diff --git a/drivers/char/specialix_io8.h b/drivers/char/specialix_io8.h deleted file mode 100644 index c63005274d9b..000000000000 --- a/drivers/char/specialix_io8.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * linux/drivers/char/specialix_io8.h -- - * Specialix IO8+ multiport serial driver. - * - * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) - * - * - * Specialix pays for the development and support of this driver. - * Please DO contact io8-linux@specialix.co.uk if you require - * support. - * - * This driver was developped in the BitWizard linux device - * driver service. If you require a linux device driver for your - * product, please contact devices@BitWizard.nl for a quote. - * - * This code is firmly based on the riscom/8 serial driver, - * written by Dmitry Gorodchanin. The specialix IO8+ card - * programming information was obtained from the CL-CD1865 Data - * Book, and Specialix document number 6200059: IO8+ Hardware - * Functional Specification. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * */ - -#ifndef __LINUX_SPECIALIX_H -#define __LINUX_SPECIALIX_H - -#include - -#ifdef __KERNEL__ - -/* You can have max 4 ISA cards in one PC, and I recommend not much -more than a few PCI versions of the card. */ - -#define SX_NBOARD 8 - -/* NOTE: Specialix decoder recognizes 4 addresses, but only two are used.... */ -#define SX_IO_SPACE 4 -/* The PCI version decodes 8 addresses, but still only 2 are used. */ -#define SX_PCI_IO_SPACE 8 - -/* eight ports per board. */ -#define SX_NPORT 8 -#define SX_BOARD(line) ((line) / SX_NPORT) -#define SX_PORT(line) ((line) & (SX_NPORT - 1)) - - -#define SX_DATA_REG 0 /* Base+0 : Data register */ -#define SX_ADDR_REG 1 /* base+1 : Address register. */ - -#define MHz *1000000 /* I'm ashamed of myself. */ - -/* On-board oscillator frequency */ -#define SX_OSCFREQ (25 MHz/2) -/* There is a 25MHz crystal on the board, but the chip is in /2 mode */ - - -/* Ticks per sec. Used for setting receiver timeout and break length */ -#define SPECIALIX_TPS 4000 - -/* Yeah, after heavy testing I decided it must be 6. - * Sure, You can change it if needed. - */ -#define SPECIALIX_RXFIFO 6 /* Max. receiver FIFO size (1-8) */ - -#define SPECIALIX_MAGIC 0x0907 - -#define SX_CCR_TIMEOUT 10000 /* CCR timeout. You may need to wait upto - 10 milliseconds before the internal - processor is available again after - you give it a command */ - -#define SX_IOBASE1 0x100 -#define SX_IOBASE2 0x180 -#define SX_IOBASE3 0x250 -#define SX_IOBASE4 0x260 - -struct specialix_board { - unsigned long flags; - unsigned short base; - unsigned char irq; - //signed char count; - int count; - unsigned char DTR; - int reg; - spinlock_t lock; -}; - -#define SX_BOARD_PRESENT 0x00000001 -#define SX_BOARD_ACTIVE 0x00000002 -#define SX_BOARD_IS_PCI 0x00000004 - - -struct specialix_port { - int magic; - struct tty_port port; - int baud_base; - int flags; - int timeout; - unsigned char * xmit_buf; - int custom_divisor; - int xmit_head; - int xmit_tail; - int xmit_cnt; - short wakeup_chars; - short break_length; - unsigned char mark_mask; - unsigned char IER; - unsigned char MSVR; - unsigned char COR2; - unsigned long overrun; - unsigned long hits[10]; - spinlock_t lock; -}; - -#endif /* __KERNEL__ */ -#endif /* __LINUX_SPECIALIX_H */ - - - - - - - - - diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c deleted file mode 100644 index 4fff5cd3b163..000000000000 --- a/drivers/char/stallion.c +++ /dev/null @@ -1,4651 +0,0 @@ -/*****************************************************************************/ - -/* - * stallion.c -- stallion multiport serial driver. - * - * Copyright (C) 1996-1999 Stallion Technologies - * Copyright (C) 1994-1996 Greg Ungerer. - * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/*****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -/*****************************************************************************/ - -/* - * Define different board types. Use the standard Stallion "assigned" - * board numbers. Boards supported in this driver are abbreviated as - * EIO = EasyIO and ECH = EasyConnection 8/32. - */ -#define BRD_EASYIO 20 -#define BRD_ECH 21 -#define BRD_ECHMC 22 -#define BRD_ECHPCI 26 -#define BRD_ECH64PCI 27 -#define BRD_EASYIOPCI 28 - -struct stlconf { - unsigned int brdtype; - int ioaddr1; - int ioaddr2; - unsigned long memaddr; - int irq; - int irqtype; -}; - -static unsigned int stl_nrbrds; - -/*****************************************************************************/ - -/* - * Define some important driver characteristics. Device major numbers - * allocated as per Linux Device Registry. - */ -#ifndef STL_SIOMEMMAJOR -#define STL_SIOMEMMAJOR 28 -#endif -#ifndef STL_SERIALMAJOR -#define STL_SERIALMAJOR 24 -#endif -#ifndef STL_CALLOUTMAJOR -#define STL_CALLOUTMAJOR 25 -#endif - -/* - * Set the TX buffer size. Bigger is better, but we don't want - * to chew too much memory with buffers! - */ -#define STL_TXBUFLOW 512 -#define STL_TXBUFSIZE 4096 - -/*****************************************************************************/ - -/* - * Define our local driver identity first. Set up stuff to deal with - * all the local structures required by a serial tty driver. - */ -static char *stl_drvtitle = "Stallion Multiport Serial Driver"; -static char *stl_drvname = "stallion"; -static char *stl_drvversion = "5.6.0"; - -static struct tty_driver *stl_serial; - -/* - * Define a local default termios struct. All ports will be created - * with this termios initially. Basically all it defines is a raw port - * at 9600, 8 data bits, 1 stop bit. - */ -static struct ktermios stl_deftermios = { - .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL), - .c_cc = INIT_C_CC, - .c_ispeed = 9600, - .c_ospeed = 9600, -}; - -/* - * Define global place to put buffer overflow characters. - */ -static char stl_unwanted[SC26198_RXFIFOSIZE]; - -/*****************************************************************************/ - -static DEFINE_MUTEX(stl_brdslock); -static struct stlbrd *stl_brds[STL_MAXBRDS]; - -static const struct tty_port_operations stl_port_ops; - -/* - * Per board state flags. Used with the state field of the board struct. - * Not really much here! - */ -#define BRD_FOUND 0x1 -#define STL_PROBED 0x2 - - -/* - * Define the port structure istate flags. These set of flags are - * modified at interrupt time - so setting and reseting them needs - * to be atomic. Use the bit clear/setting routines for this. - */ -#define ASYI_TXBUSY 1 -#define ASYI_TXLOW 2 -#define ASYI_TXFLOWED 3 - -/* - * Define an array of board names as printable strings. Handy for - * referencing boards when printing trace and stuff. - */ -static char *stl_brdnames[] = { - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - "EasyIO", - "EC8/32-AT", - "EC8/32-MC", - NULL, - NULL, - NULL, - "EC8/32-PCI", - "EC8/64-PCI", - "EasyIO-PCI", -}; - -/*****************************************************************************/ - -/* - * Define some string labels for arguments passed from the module - * load line. These allow for easy board definitions, and easy - * modification of the io, memory and irq resoucres. - */ -static unsigned int stl_nargs; -static char *board0[4]; -static char *board1[4]; -static char *board2[4]; -static char *board3[4]; - -static char **stl_brdsp[] = { - (char **) &board0, - (char **) &board1, - (char **) &board2, - (char **) &board3 -}; - -/* - * Define a set of common board names, and types. This is used to - * parse any module arguments. - */ - -static struct { - char *name; - int type; -} stl_brdstr[] = { - { "easyio", BRD_EASYIO }, - { "eio", BRD_EASYIO }, - { "20", BRD_EASYIO }, - { "ec8/32", BRD_ECH }, - { "ec8/32-at", BRD_ECH }, - { "ec8/32-isa", BRD_ECH }, - { "ech", BRD_ECH }, - { "echat", BRD_ECH }, - { "21", BRD_ECH }, - { "ec8/32-mc", BRD_ECHMC }, - { "ec8/32-mca", BRD_ECHMC }, - { "echmc", BRD_ECHMC }, - { "echmca", BRD_ECHMC }, - { "22", BRD_ECHMC }, - { "ec8/32-pc", BRD_ECHPCI }, - { "ec8/32-pci", BRD_ECHPCI }, - { "26", BRD_ECHPCI }, - { "ec8/64-pc", BRD_ECH64PCI }, - { "ec8/64-pci", BRD_ECH64PCI }, - { "ech-pci", BRD_ECH64PCI }, - { "echpci", BRD_ECH64PCI }, - { "echpc", BRD_ECH64PCI }, - { "27", BRD_ECH64PCI }, - { "easyio-pc", BRD_EASYIOPCI }, - { "easyio-pci", BRD_EASYIOPCI }, - { "eio-pci", BRD_EASYIOPCI }, - { "eiopci", BRD_EASYIOPCI }, - { "28", BRD_EASYIOPCI }, -}; - -/* - * Define the module agruments. - */ - -module_param_array(board0, charp, &stl_nargs, 0); -MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]"); -module_param_array(board1, charp, &stl_nargs, 0); -MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]"); -module_param_array(board2, charp, &stl_nargs, 0); -MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]"); -module_param_array(board3, charp, &stl_nargs, 0); -MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]"); - -/*****************************************************************************/ - -/* - * Hardware ID bits for the EasyIO and ECH boards. These defines apply - * to the directly accessible io ports of these boards (not the uarts - - * they are in cd1400.h and sc26198.h). - */ -#define EIO_8PORTRS 0x04 -#define EIO_4PORTRS 0x05 -#define EIO_8PORTDI 0x00 -#define EIO_8PORTM 0x06 -#define EIO_MK3 0x03 -#define EIO_IDBITMASK 0x07 - -#define EIO_BRDMASK 0xf0 -#define ID_BRD4 0x10 -#define ID_BRD8 0x20 -#define ID_BRD16 0x30 - -#define EIO_INTRPEND 0x08 -#define EIO_INTEDGE 0x00 -#define EIO_INTLEVEL 0x08 -#define EIO_0WS 0x10 - -#define ECH_ID 0xa0 -#define ECH_IDBITMASK 0xe0 -#define ECH_BRDENABLE 0x08 -#define ECH_BRDDISABLE 0x00 -#define ECH_INTENABLE 0x01 -#define ECH_INTDISABLE 0x00 -#define ECH_INTLEVEL 0x02 -#define ECH_INTEDGE 0x00 -#define ECH_INTRPEND 0x01 -#define ECH_BRDRESET 0x01 - -#define ECHMC_INTENABLE 0x01 -#define ECHMC_BRDRESET 0x02 - -#define ECH_PNLSTATUS 2 -#define ECH_PNL16PORT 0x20 -#define ECH_PNLIDMASK 0x07 -#define ECH_PNLXPID 0x40 -#define ECH_PNLINTRPEND 0x80 - -#define ECH_ADDR2MASK 0x1e0 - -/* - * Define the vector mapping bits for the programmable interrupt board - * hardware. These bits encode the interrupt for the board to use - it - * is software selectable (except the EIO-8M). - */ -static unsigned char stl_vecmap[] = { - 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07, - 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03 -}; - -/* - * Lock ordering is that you may not take stallion_lock holding - * brd_lock. - */ - -static spinlock_t brd_lock; /* Guard the board mapping */ -static spinlock_t stallion_lock; /* Guard the tty driver */ - -/* - * Set up enable and disable macros for the ECH boards. They require - * the secondary io address space to be activated and deactivated. - * This way all ECH boards can share their secondary io region. - * If this is an ECH-PCI board then also need to set the page pointer - * to point to the correct page. - */ -#define BRDENABLE(brdnr,pagenr) \ - if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \ - outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \ - stl_brds[(brdnr)]->ioctrl); \ - else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \ - outb((pagenr), stl_brds[(brdnr)]->ioctrl); - -#define BRDDISABLE(brdnr) \ - if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \ - outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \ - stl_brds[(brdnr)]->ioctrl); - -#define STL_CD1400MAXBAUD 230400 -#define STL_SC26198MAXBAUD 460800 - -#define STL_BAUDBASE 115200 -#define STL_CLOSEDELAY (5 * HZ / 10) - -/*****************************************************************************/ - -/* - * Define the Stallion PCI vendor and device IDs. - */ -#ifndef PCI_VENDOR_ID_STALLION -#define PCI_VENDOR_ID_STALLION 0x124d -#endif -#ifndef PCI_DEVICE_ID_ECHPCI832 -#define PCI_DEVICE_ID_ECHPCI832 0x0000 -#endif -#ifndef PCI_DEVICE_ID_ECHPCI864 -#define PCI_DEVICE_ID_ECHPCI864 0x0002 -#endif -#ifndef PCI_DEVICE_ID_EIOPCI -#define PCI_DEVICE_ID_EIOPCI 0x0003 -#endif - -/* - * Define structure to hold all Stallion PCI boards. - */ - -static struct pci_device_id stl_pcibrds[] = { - { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864), - .driver_data = BRD_ECH64PCI }, - { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI), - .driver_data = BRD_EASYIOPCI }, - { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832), - .driver_data = BRD_ECHPCI }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410), - .driver_data = BRD_ECHPCI }, - { } -}; -MODULE_DEVICE_TABLE(pci, stl_pcibrds); - -/*****************************************************************************/ - -/* - * Define macros to extract a brd/port number from a minor number. - */ -#define MINOR2BRD(min) (((min) & 0xc0) >> 6) -#define MINOR2PORT(min) ((min) & 0x3f) - -/* - * Define a baud rate table that converts termios baud rate selector - * into the actual baud rate value. All baud rate calculations are - * based on the actual baud rate required. - */ -static unsigned int stl_baudrates[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 -}; - -/*****************************************************************************/ - -/* - * Declare all those functions in this driver! - */ - -static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); -static int stl_brdinit(struct stlbrd *brdp); -static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); -static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); - -/* - * CD1400 uart specific handling functions. - */ -static void stl_cd1400setreg(struct stlport *portp, int regnr, int value); -static int stl_cd1400getreg(struct stlport *portp, int regnr); -static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value); -static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp); -static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); -static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp); -static int stl_cd1400getsignals(struct stlport *portp); -static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts); -static void stl_cd1400ccrwait(struct stlport *portp); -static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx); -static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx); -static void stl_cd1400disableintrs(struct stlport *portp); -static void stl_cd1400sendbreak(struct stlport *portp, int len); -static void stl_cd1400flowctrl(struct stlport *portp, int state); -static void stl_cd1400sendflow(struct stlport *portp, int state); -static void stl_cd1400flush(struct stlport *portp); -static int stl_cd1400datastate(struct stlport *portp); -static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase); -static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase); -static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr); -static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr); -static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr); - -static inline int stl_cd1400breakisr(struct stlport *portp, int ioaddr); - -/* - * SC26198 uart specific handling functions. - */ -static void stl_sc26198setreg(struct stlport *portp, int regnr, int value); -static int stl_sc26198getreg(struct stlport *portp, int regnr); -static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value); -static int stl_sc26198getglobreg(struct stlport *portp, int regnr); -static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp); -static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); -static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp); -static int stl_sc26198getsignals(struct stlport *portp); -static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts); -static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx); -static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx); -static void stl_sc26198disableintrs(struct stlport *portp); -static void stl_sc26198sendbreak(struct stlport *portp, int len); -static void stl_sc26198flowctrl(struct stlport *portp, int state); -static void stl_sc26198sendflow(struct stlport *portp, int state); -static void stl_sc26198flush(struct stlport *portp); -static int stl_sc26198datastate(struct stlport *portp); -static void stl_sc26198wait(struct stlport *portp); -static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty); -static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase); -static void stl_sc26198txisr(struct stlport *port); -static void stl_sc26198rxisr(struct stlport *port, unsigned int iack); -static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch); -static void stl_sc26198rxbadchars(struct stlport *portp); -static void stl_sc26198otherisr(struct stlport *port, unsigned int iack); - -/*****************************************************************************/ - -/* - * Generic UART support structure. - */ -typedef struct uart { - int (*panelinit)(struct stlbrd *brdp, struct stlpanel *panelp); - void (*portinit)(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); - void (*setport)(struct stlport *portp, struct ktermios *tiosp); - int (*getsignals)(struct stlport *portp); - void (*setsignals)(struct stlport *portp, int dtr, int rts); - void (*enablerxtx)(struct stlport *portp, int rx, int tx); - void (*startrxtx)(struct stlport *portp, int rx, int tx); - void (*disableintrs)(struct stlport *portp); - void (*sendbreak)(struct stlport *portp, int len); - void (*flowctrl)(struct stlport *portp, int state); - void (*sendflow)(struct stlport *portp, int state); - void (*flush)(struct stlport *portp); - int (*datastate)(struct stlport *portp); - void (*intr)(struct stlpanel *panelp, unsigned int iobase); -} uart_t; - -/* - * Define some macros to make calling these functions nice and clean. - */ -#define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit) -#define stl_portinit (* ((uart_t *) portp->uartp)->portinit) -#define stl_setport (* ((uart_t *) portp->uartp)->setport) -#define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals) -#define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals) -#define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx) -#define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx) -#define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs) -#define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak) -#define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl) -#define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow) -#define stl_flush (* ((uart_t *) portp->uartp)->flush) -#define stl_datastate (* ((uart_t *) portp->uartp)->datastate) - -/*****************************************************************************/ - -/* - * CD1400 UART specific data initialization. - */ -static uart_t stl_cd1400uart = { - stl_cd1400panelinit, - stl_cd1400portinit, - stl_cd1400setport, - stl_cd1400getsignals, - stl_cd1400setsignals, - stl_cd1400enablerxtx, - stl_cd1400startrxtx, - stl_cd1400disableintrs, - stl_cd1400sendbreak, - stl_cd1400flowctrl, - stl_cd1400sendflow, - stl_cd1400flush, - stl_cd1400datastate, - stl_cd1400eiointr -}; - -/* - * Define the offsets within the register bank of a cd1400 based panel. - * These io address offsets are common to the EasyIO board as well. - */ -#define EREG_ADDR 0 -#define EREG_DATA 4 -#define EREG_RXACK 5 -#define EREG_TXACK 6 -#define EREG_MDACK 7 - -#define EREG_BANKSIZE 8 - -#define CD1400_CLK 25000000 -#define CD1400_CLK8M 20000000 - -/* - * Define the cd1400 baud rate clocks. These are used when calculating - * what clock and divisor to use for the required baud rate. Also - * define the maximum baud rate allowed, and the default base baud. - */ -static int stl_cd1400clkdivs[] = { - CD1400_CLK0, CD1400_CLK1, CD1400_CLK2, CD1400_CLK3, CD1400_CLK4 -}; - -/*****************************************************************************/ - -/* - * SC26198 UART specific data initization. - */ -static uart_t stl_sc26198uart = { - stl_sc26198panelinit, - stl_sc26198portinit, - stl_sc26198setport, - stl_sc26198getsignals, - stl_sc26198setsignals, - stl_sc26198enablerxtx, - stl_sc26198startrxtx, - stl_sc26198disableintrs, - stl_sc26198sendbreak, - stl_sc26198flowctrl, - stl_sc26198sendflow, - stl_sc26198flush, - stl_sc26198datastate, - stl_sc26198intr -}; - -/* - * Define the offsets within the register bank of a sc26198 based panel. - */ -#define XP_DATA 0 -#define XP_ADDR 1 -#define XP_MODID 2 -#define XP_STATUS 2 -#define XP_IACK 3 - -#define XP_BANKSIZE 4 - -/* - * Define the sc26198 baud rate table. Offsets within the table - * represent the actual baud rate selector of sc26198 registers. - */ -static unsigned int sc26198_baudtable[] = { - 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600, - 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200, - 230400, 460800, 921600 -}; - -#define SC26198_NRBAUDS ARRAY_SIZE(sc26198_baudtable) - -/*****************************************************************************/ - -/* - * Define the driver info for a user level control device. Used mainly - * to get at port stats - only not using the port device itself. - */ -static const struct file_operations stl_fsiomem = { - .owner = THIS_MODULE, - .unlocked_ioctl = stl_memioctl, - .llseek = noop_llseek, -}; - -static struct class *stallion_class; - -static void stl_cd_change(struct stlport *portp) -{ - unsigned int oldsigs = portp->sigs; - struct tty_struct *tty = tty_port_tty_get(&portp->port); - - if (!tty) - return; - - portp->sigs = stl_getsignals(portp); - - if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0)) - wake_up_interruptible(&portp->port.open_wait); - - if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) - if (portp->port.flags & ASYNC_CHECK_CD) - tty_hangup(tty); - tty_kref_put(tty); -} - -/* - * Check for any arguments passed in on the module load command line. - */ - -/*****************************************************************************/ - -/* - * Parse the supplied argument string, into the board conf struct. - */ - -static int __init stl_parsebrd(struct stlconf *confp, char **argp) -{ - char *sp; - unsigned int i; - - pr_debug("stl_parsebrd(confp=%p,argp=%p)\n", confp, argp); - - if ((argp[0] == NULL) || (*argp[0] == 0)) - return 0; - - for (sp = argp[0], i = 0; (*sp != 0) && (i < 25); sp++, i++) - *sp = tolower(*sp); - - for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++) - if (strcmp(stl_brdstr[i].name, argp[0]) == 0) - break; - - if (i == ARRAY_SIZE(stl_brdstr)) { - printk("STALLION: unknown board name, %s?\n", argp[0]); - return 0; - } - - confp->brdtype = stl_brdstr[i].type; - - i = 1; - if ((argp[i] != NULL) && (*argp[i] != 0)) - confp->ioaddr1 = simple_strtoul(argp[i], NULL, 0); - i++; - if (confp->brdtype == BRD_ECH) { - if ((argp[i] != NULL) && (*argp[i] != 0)) - confp->ioaddr2 = simple_strtoul(argp[i], NULL, 0); - i++; - } - if ((argp[i] != NULL) && (*argp[i] != 0)) - confp->irq = simple_strtoul(argp[i], NULL, 0); - return 1; -} - -/*****************************************************************************/ - -/* - * Allocate a new board structure. Fill out the basic info in it. - */ - -static struct stlbrd *stl_allocbrd(void) -{ - struct stlbrd *brdp; - - brdp = kzalloc(sizeof(struct stlbrd), GFP_KERNEL); - if (!brdp) { - printk("STALLION: failed to allocate memory (size=%Zd)\n", - sizeof(struct stlbrd)); - return NULL; - } - - brdp->magic = STL_BOARDMAGIC; - return brdp; -} - -/*****************************************************************************/ - -static int stl_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct stlport *portp = container_of(port, struct stlport, port); - if (!portp->tx.buf) { - portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); - if (!portp->tx.buf) - return -ENOMEM; - portp->tx.head = portp->tx.buf; - portp->tx.tail = portp->tx.buf; - } - stl_setport(portp, tty->termios); - portp->sigs = stl_getsignals(portp); - stl_setsignals(portp, 1, 1); - stl_enablerxtx(portp, 1, 1); - stl_startrxtx(portp, 1, 0); - return 0; -} - -static int stl_open(struct tty_struct *tty, struct file *filp) -{ - struct stlport *portp; - struct stlbrd *brdp; - unsigned int minordev, brdnr, panelnr; - int portnr; - - pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name); - - minordev = tty->index; - brdnr = MINOR2BRD(minordev); - if (brdnr >= stl_nrbrds) - return -ENODEV; - brdp = stl_brds[brdnr]; - if (brdp == NULL) - return -ENODEV; - - minordev = MINOR2PORT(minordev); - for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) { - if (brdp->panels[panelnr] == NULL) - break; - if (minordev < brdp->panels[panelnr]->nrports) { - portnr = minordev; - break; - } - minordev -= brdp->panels[panelnr]->nrports; - } - if (portnr < 0) - return -ENODEV; - - portp = brdp->panels[panelnr]->ports[portnr]; - if (portp == NULL) - return -ENODEV; - - tty->driver_data = portp; - return tty_port_open(&portp->port, tty, filp); - -} - -/*****************************************************************************/ - -static int stl_carrier_raised(struct tty_port *port) -{ - struct stlport *portp = container_of(port, struct stlport, port); - return (portp->sigs & TIOCM_CD) ? 1 : 0; -} - -static void stl_dtr_rts(struct tty_port *port, int on) -{ - struct stlport *portp = container_of(port, struct stlport, port); - /* Takes brd_lock internally */ - stl_setsignals(portp, on, on); -} - -/*****************************************************************************/ - -static void stl_flushbuffer(struct tty_struct *tty) -{ - struct stlport *portp; - - pr_debug("stl_flushbuffer(tty=%p)\n", tty); - - portp = tty->driver_data; - if (portp == NULL) - return; - - stl_flush(portp); - tty_wakeup(tty); -} - -/*****************************************************************************/ - -static void stl_waituntilsent(struct tty_struct *tty, int timeout) -{ - struct stlport *portp; - unsigned long tend; - - pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout); - - portp = tty->driver_data; - if (portp == NULL) - return; - - if (timeout == 0) - timeout = HZ; - tend = jiffies + timeout; - - while (stl_datastate(portp)) { - if (signal_pending(current)) - break; - msleep_interruptible(20); - if (time_after_eq(jiffies, tend)) - break; - } -} - -/*****************************************************************************/ - -static void stl_shutdown(struct tty_port *port) -{ - struct stlport *portp = container_of(port, struct stlport, port); - stl_disableintrs(portp); - stl_enablerxtx(portp, 0, 0); - stl_flush(portp); - portp->istate = 0; - if (portp->tx.buf != NULL) { - kfree(portp->tx.buf); - portp->tx.buf = NULL; - portp->tx.head = NULL; - portp->tx.tail = NULL; - } -} - -static void stl_close(struct tty_struct *tty, struct file *filp) -{ - struct stlport*portp; - pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); - - portp = tty->driver_data; - if(portp == NULL) - return; - tty_port_close(&portp->port, tty, filp); -} - -/*****************************************************************************/ - -/* - * Write routine. Take data and stuff it in to the TX ring queue. - * If transmit interrupts are not running then start them. - */ - -static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - struct stlport *portp; - unsigned int len, stlen; - unsigned char *chbuf; - char *head, *tail; - - pr_debug("stl_write(tty=%p,buf=%p,count=%d)\n", tty, buf, count); - - portp = tty->driver_data; - if (portp == NULL) - return 0; - if (portp->tx.buf == NULL) - return 0; - -/* - * If copying direct from user space we must cater for page faults, - * causing us to "sleep" here for a while. To handle this copy in all - * the data we need now, into a local buffer. Then when we got it all - * copy it into the TX buffer. - */ - chbuf = (unsigned char *) buf; - - head = portp->tx.head; - tail = portp->tx.tail; - if (head >= tail) { - len = STL_TXBUFSIZE - (head - tail) - 1; - stlen = STL_TXBUFSIZE - (head - portp->tx.buf); - } else { - len = tail - head - 1; - stlen = len; - } - - len = min(len, (unsigned int)count); - count = 0; - while (len > 0) { - stlen = min(len, stlen); - memcpy(head, chbuf, stlen); - len -= stlen; - chbuf += stlen; - count += stlen; - head += stlen; - if (head >= (portp->tx.buf + STL_TXBUFSIZE)) { - head = portp->tx.buf; - stlen = tail - head; - } - } - portp->tx.head = head; - - clear_bit(ASYI_TXLOW, &portp->istate); - stl_startrxtx(portp, -1, 1); - - return count; -} - -/*****************************************************************************/ - -static int stl_putchar(struct tty_struct *tty, unsigned char ch) -{ - struct stlport *portp; - unsigned int len; - char *head, *tail; - - pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch); - - portp = tty->driver_data; - if (portp == NULL) - return -EINVAL; - if (portp->tx.buf == NULL) - return -EINVAL; - - head = portp->tx.head; - tail = portp->tx.tail; - - len = (head >= tail) ? (STL_TXBUFSIZE - (head - tail)) : (tail - head); - len--; - - if (len > 0) { - *head++ = ch; - if (head >= (portp->tx.buf + STL_TXBUFSIZE)) - head = portp->tx.buf; - } - portp->tx.head = head; - return 0; -} - -/*****************************************************************************/ - -/* - * If there are any characters in the buffer then make sure that TX - * interrupts are on and get'em out. Normally used after the putchar - * routine has been called. - */ - -static void stl_flushchars(struct tty_struct *tty) -{ - struct stlport *portp; - - pr_debug("stl_flushchars(tty=%p)\n", tty); - - portp = tty->driver_data; - if (portp == NULL) - return; - if (portp->tx.buf == NULL) - return; - - stl_startrxtx(portp, -1, 1); -} - -/*****************************************************************************/ - -static int stl_writeroom(struct tty_struct *tty) -{ - struct stlport *portp; - char *head, *tail; - - pr_debug("stl_writeroom(tty=%p)\n", tty); - - portp = tty->driver_data; - if (portp == NULL) - return 0; - if (portp->tx.buf == NULL) - return 0; - - head = portp->tx.head; - tail = portp->tx.tail; - return (head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1); -} - -/*****************************************************************************/ - -/* - * Return number of chars in the TX buffer. Normally we would just - * calculate the number of chars in the buffer and return that, but if - * the buffer is empty and TX interrupts are still on then we return - * that the buffer still has 1 char in it. This way whoever called us - * will not think that ALL chars have drained - since the UART still - * must have some chars in it (we are busy after all). - */ - -static int stl_charsinbuffer(struct tty_struct *tty) -{ - struct stlport *portp; - unsigned int size; - char *head, *tail; - - pr_debug("stl_charsinbuffer(tty=%p)\n", tty); - - portp = tty->driver_data; - if (portp == NULL) - return 0; - if (portp->tx.buf == NULL) - return 0; - - head = portp->tx.head; - tail = portp->tx.tail; - size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); - if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate)) - size = 1; - return size; -} - -/*****************************************************************************/ - -/* - * Generate the serial struct info. - */ - -static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) -{ - struct serial_struct sio; - struct stlbrd *brdp; - - pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp); - - memset(&sio, 0, sizeof(struct serial_struct)); - - mutex_lock(&portp->port.mutex); - sio.line = portp->portnr; - sio.port = portp->ioaddr; - sio.flags = portp->port.flags; - sio.baud_base = portp->baud_base; - sio.close_delay = portp->close_delay; - sio.closing_wait = portp->closing_wait; - sio.custom_divisor = portp->custom_divisor; - sio.hub6 = 0; - if (portp->uartp == &stl_cd1400uart) { - sio.type = PORT_CIRRUS; - sio.xmit_fifo_size = CD1400_TXFIFOSIZE; - } else { - sio.type = PORT_UNKNOWN; - sio.xmit_fifo_size = SC26198_TXFIFOSIZE; - } - - brdp = stl_brds[portp->brdnr]; - if (brdp != NULL) - sio.irq = brdp->irq; - mutex_unlock(&portp->port.mutex); - - return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0; -} - -/*****************************************************************************/ - -/* - * Set port according to the serial struct info. - * At this point we do not do any auto-configure stuff, so we will - * just quietly ignore any requests to change irq, etc. - */ - -static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp) -{ - struct stlport * portp = tty->driver_data; - struct serial_struct sio; - - pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp); - - if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) - return -EFAULT; - mutex_lock(&portp->port.mutex); - if (!capable(CAP_SYS_ADMIN)) { - if ((sio.baud_base != portp->baud_base) || - (sio.close_delay != portp->close_delay) || - ((sio.flags & ~ASYNC_USR_MASK) != - (portp->port.flags & ~ASYNC_USR_MASK))) { - mutex_unlock(&portp->port.mutex); - return -EPERM; - } - } - - portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | - (sio.flags & ASYNC_USR_MASK); - portp->baud_base = sio.baud_base; - portp->close_delay = sio.close_delay; - portp->closing_wait = sio.closing_wait; - portp->custom_divisor = sio.custom_divisor; - mutex_unlock(&portp->port.mutex); - stl_setport(portp, tty->termios); - return 0; -} - -/*****************************************************************************/ - -static int stl_tiocmget(struct tty_struct *tty) -{ - struct stlport *portp; - - portp = tty->driver_data; - if (portp == NULL) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - return stl_getsignals(portp); -} - -static int stl_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct stlport *portp; - int rts = -1, dtr = -1; - - portp = tty->driver_data; - if (portp == NULL) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - if (set & TIOCM_RTS) - rts = 1; - if (set & TIOCM_DTR) - dtr = 1; - if (clear & TIOCM_RTS) - rts = 0; - if (clear & TIOCM_DTR) - dtr = 0; - - stl_setsignals(portp, dtr, rts); - return 0; -} - -static int stl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) -{ - struct stlport *portp; - int rc; - void __user *argp = (void __user *)arg; - - pr_debug("stl_ioctl(tty=%p,cmd=%x,arg=%lx)\n", tty, cmd, arg); - - portp = tty->driver_data; - if (portp == NULL) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - rc = 0; - - switch (cmd) { - case TIOCGSERIAL: - rc = stl_getserial(portp, argp); - break; - case TIOCSSERIAL: - rc = stl_setserial(tty, argp); - break; - case COM_GETPORTSTATS: - rc = stl_getportstats(tty, portp, argp); - break; - case COM_CLRPORTSTATS: - rc = stl_clrportstats(portp, argp); - break; - case TIOCSERCONFIG: - case TIOCSERGWILD: - case TIOCSERSWILD: - case TIOCSERGETLSR: - case TIOCSERGSTRUCT: - case TIOCSERGETMULTI: - case TIOCSERSETMULTI: - default: - rc = -ENOIOCTLCMD; - break; - } - return rc; -} - -/*****************************************************************************/ - -/* - * Start the transmitter again. Just turn TX interrupts back on. - */ - -static void stl_start(struct tty_struct *tty) -{ - struct stlport *portp; - - pr_debug("stl_start(tty=%p)\n", tty); - - portp = tty->driver_data; - if (portp == NULL) - return; - stl_startrxtx(portp, -1, 1); -} - -/*****************************************************************************/ - -static void stl_settermios(struct tty_struct *tty, struct ktermios *old) -{ - struct stlport *portp; - struct ktermios *tiosp; - - pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old); - - portp = tty->driver_data; - if (portp == NULL) - return; - - tiosp = tty->termios; - if ((tiosp->c_cflag == old->c_cflag) && - (tiosp->c_iflag == old->c_iflag)) - return; - - stl_setport(portp, tiosp); - stl_setsignals(portp, ((tiosp->c_cflag & (CBAUD & ~CBAUDEX)) ? 1 : 0), - -1); - if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) { - tty->hw_stopped = 0; - stl_start(tty); - } - if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL)) - wake_up_interruptible(&portp->port.open_wait); -} - -/*****************************************************************************/ - -/* - * Attempt to flow control who ever is sending us data. Based on termios - * settings use software or/and hardware flow control. - */ - -static void stl_throttle(struct tty_struct *tty) -{ - struct stlport *portp; - - pr_debug("stl_throttle(tty=%p)\n", tty); - - portp = tty->driver_data; - if (portp == NULL) - return; - stl_flowctrl(portp, 0); -} - -/*****************************************************************************/ - -/* - * Unflow control the device sending us data... - */ - -static void stl_unthrottle(struct tty_struct *tty) -{ - struct stlport *portp; - - pr_debug("stl_unthrottle(tty=%p)\n", tty); - - portp = tty->driver_data; - if (portp == NULL) - return; - stl_flowctrl(portp, 1); -} - -/*****************************************************************************/ - -/* - * Stop the transmitter. Basically to do this we will just turn TX - * interrupts off. - */ - -static void stl_stop(struct tty_struct *tty) -{ - struct stlport *portp; - - pr_debug("stl_stop(tty=%p)\n", tty); - - portp = tty->driver_data; - if (portp == NULL) - return; - stl_startrxtx(portp, -1, 0); -} - -/*****************************************************************************/ - -/* - * Hangup this port. This is pretty much like closing the port, only - * a little more brutal. No waiting for data to drain. Shutdown the - * port and maybe drop signals. - */ - -static void stl_hangup(struct tty_struct *tty) -{ - struct stlport *portp = tty->driver_data; - pr_debug("stl_hangup(tty=%p)\n", tty); - - if (portp == NULL) - return; - tty_port_hangup(&portp->port); -} - -/*****************************************************************************/ - -static int stl_breakctl(struct tty_struct *tty, int state) -{ - struct stlport *portp; - - pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state); - - portp = tty->driver_data; - if (portp == NULL) - return -EINVAL; - - stl_sendbreak(portp, ((state == -1) ? 1 : 2)); - return 0; -} - -/*****************************************************************************/ - -static void stl_sendxchar(struct tty_struct *tty, char ch) -{ - struct stlport *portp; - - pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch); - - portp = tty->driver_data; - if (portp == NULL) - return; - - if (ch == STOP_CHAR(tty)) - stl_sendflow(portp, 0); - else if (ch == START_CHAR(tty)) - stl_sendflow(portp, 1); - else - stl_putchar(tty, ch); -} - -static void stl_portinfo(struct seq_file *m, struct stlport *portp, int portnr) -{ - int sigs; - char sep; - - seq_printf(m, "%d: uart:%s tx:%d rx:%d", - portnr, (portp->hwid == 1) ? "SC26198" : "CD1400", - (int) portp->stats.txtotal, (int) portp->stats.rxtotal); - - if (portp->stats.rxframing) - seq_printf(m, " fe:%d", (int) portp->stats.rxframing); - if (portp->stats.rxparity) - seq_printf(m, " pe:%d", (int) portp->stats.rxparity); - if (portp->stats.rxbreaks) - seq_printf(m, " brk:%d", (int) portp->stats.rxbreaks); - if (portp->stats.rxoverrun) - seq_printf(m, " oe:%d", (int) portp->stats.rxoverrun); - - sigs = stl_getsignals(portp); - sep = ' '; - if (sigs & TIOCM_RTS) { - seq_printf(m, "%c%s", sep, "RTS"); - sep = '|'; - } - if (sigs & TIOCM_CTS) { - seq_printf(m, "%c%s", sep, "CTS"); - sep = '|'; - } - if (sigs & TIOCM_DTR) { - seq_printf(m, "%c%s", sep, "DTR"); - sep = '|'; - } - if (sigs & TIOCM_CD) { - seq_printf(m, "%c%s", sep, "DCD"); - sep = '|'; - } - if (sigs & TIOCM_DSR) { - seq_printf(m, "%c%s", sep, "DSR"); - sep = '|'; - } - seq_putc(m, '\n'); -} - -/*****************************************************************************/ - -/* - * Port info, read from the /proc file system. - */ - -static int stl_proc_show(struct seq_file *m, void *v) -{ - struct stlbrd *brdp; - struct stlpanel *panelp; - struct stlport *portp; - unsigned int brdnr, panelnr, portnr; - int totalport; - - totalport = 0; - - seq_printf(m, "%s: version %s\n", stl_drvtitle, stl_drvversion); - -/* - * We scan through for each board, panel and port. The offset is - * calculated on the fly, and irrelevant ports are skipped. - */ - for (brdnr = 0; brdnr < stl_nrbrds; brdnr++) { - brdp = stl_brds[brdnr]; - if (brdp == NULL) - continue; - if (brdp->state == 0) - continue; - - totalport = brdnr * STL_MAXPORTS; - for (panelnr = 0; panelnr < brdp->nrpanels; panelnr++) { - panelp = brdp->panels[panelnr]; - if (panelp == NULL) - continue; - - for (portnr = 0; portnr < panelp->nrports; portnr++, - totalport++) { - portp = panelp->ports[portnr]; - if (portp == NULL) - continue; - stl_portinfo(m, portp, totalport); - } - } - } - return 0; -} - -static int stl_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, stl_proc_show, NULL); -} - -static const struct file_operations stl_proc_fops = { - .owner = THIS_MODULE, - .open = stl_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/*****************************************************************************/ - -/* - * All board interrupts are vectored through here first. This code then - * calls off to the approrpriate board interrupt handlers. - */ - -static irqreturn_t stl_intr(int irq, void *dev_id) -{ - struct stlbrd *brdp = dev_id; - - pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp, brdp->irq); - - return IRQ_RETVAL((* brdp->isr)(brdp)); -} - -/*****************************************************************************/ - -/* - * Interrupt service routine for EasyIO board types. - */ - -static int stl_eiointr(struct stlbrd *brdp) -{ - struct stlpanel *panelp; - unsigned int iobase; - int handled = 0; - - spin_lock(&brd_lock); - panelp = brdp->panels[0]; - iobase = panelp->iobase; - while (inb(brdp->iostatus) & EIO_INTRPEND) { - handled = 1; - (* panelp->isr)(panelp, iobase); - } - spin_unlock(&brd_lock); - return handled; -} - -/*****************************************************************************/ - -/* - * Interrupt service routine for ECH-AT board types. - */ - -static int stl_echatintr(struct stlbrd *brdp) -{ - struct stlpanel *panelp; - unsigned int ioaddr, bnknr; - int handled = 0; - - outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl); - - while (inb(brdp->iostatus) & ECH_INTRPEND) { - handled = 1; - for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { - ioaddr = brdp->bnkstataddr[bnknr]; - if (inb(ioaddr) & ECH_PNLINTRPEND) { - panelp = brdp->bnk2panel[bnknr]; - (* panelp->isr)(panelp, (ioaddr & 0xfffc)); - } - } - } - - outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl); - - return handled; -} - -/*****************************************************************************/ - -/* - * Interrupt service routine for ECH-MCA board types. - */ - -static int stl_echmcaintr(struct stlbrd *brdp) -{ - struct stlpanel *panelp; - unsigned int ioaddr, bnknr; - int handled = 0; - - while (inb(brdp->iostatus) & ECH_INTRPEND) { - handled = 1; - for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { - ioaddr = brdp->bnkstataddr[bnknr]; - if (inb(ioaddr) & ECH_PNLINTRPEND) { - panelp = brdp->bnk2panel[bnknr]; - (* panelp->isr)(panelp, (ioaddr & 0xfffc)); - } - } - } - return handled; -} - -/*****************************************************************************/ - -/* - * Interrupt service routine for ECH-PCI board types. - */ - -static int stl_echpciintr(struct stlbrd *brdp) -{ - struct stlpanel *panelp; - unsigned int ioaddr, bnknr, recheck; - int handled = 0; - - while (1) { - recheck = 0; - for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { - outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl); - ioaddr = brdp->bnkstataddr[bnknr]; - if (inb(ioaddr) & ECH_PNLINTRPEND) { - panelp = brdp->bnk2panel[bnknr]; - (* panelp->isr)(panelp, (ioaddr & 0xfffc)); - recheck++; - handled = 1; - } - } - if (! recheck) - break; - } - return handled; -} - -/*****************************************************************************/ - -/* - * Interrupt service routine for ECH-8/64-PCI board types. - */ - -static int stl_echpci64intr(struct stlbrd *brdp) -{ - struct stlpanel *panelp; - unsigned int ioaddr, bnknr; - int handled = 0; - - while (inb(brdp->ioctrl) & 0x1) { - handled = 1; - for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { - ioaddr = brdp->bnkstataddr[bnknr]; - if (inb(ioaddr) & ECH_PNLINTRPEND) { - panelp = brdp->bnk2panel[bnknr]; - (* panelp->isr)(panelp, (ioaddr & 0xfffc)); - } - } - } - - return handled; -} - -/*****************************************************************************/ - -/* - * Initialize all the ports on a panel. - */ - -static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) -{ - struct stlport *portp; - unsigned int i; - int chipmask; - - pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp, panelp); - - chipmask = stl_panelinit(brdp, panelp); - -/* - * All UART's are initialized (if found!). Now go through and setup - * each ports data structures. - */ - for (i = 0; i < panelp->nrports; i++) { - portp = kzalloc(sizeof(struct stlport), GFP_KERNEL); - if (!portp) { - printk("STALLION: failed to allocate memory " - "(size=%Zd)\n", sizeof(struct stlport)); - break; - } - tty_port_init(&portp->port); - portp->port.ops = &stl_port_ops; - portp->magic = STL_PORTMAGIC; - portp->portnr = i; - portp->brdnr = panelp->brdnr; - portp->panelnr = panelp->panelnr; - portp->uartp = panelp->uartp; - portp->clk = brdp->clk; - portp->baud_base = STL_BAUDBASE; - portp->close_delay = STL_CLOSEDELAY; - portp->closing_wait = 30 * HZ; - init_waitqueue_head(&portp->port.open_wait); - init_waitqueue_head(&portp->port.close_wait); - portp->stats.brd = portp->brdnr; - portp->stats.panel = portp->panelnr; - portp->stats.port = portp->portnr; - panelp->ports[i] = portp; - stl_portinit(brdp, panelp, portp); - } - - return 0; -} - -static void stl_cleanup_panels(struct stlbrd *brdp) -{ - struct stlpanel *panelp; - struct stlport *portp; - unsigned int j, k; - struct tty_struct *tty; - - for (j = 0; j < STL_MAXPANELS; j++) { - panelp = brdp->panels[j]; - if (panelp == NULL) - continue; - for (k = 0; k < STL_PORTSPERPANEL; k++) { - portp = panelp->ports[k]; - if (portp == NULL) - continue; - tty = tty_port_tty_get(&portp->port); - if (tty != NULL) { - stl_hangup(tty); - tty_kref_put(tty); - } - kfree(portp->tx.buf); - kfree(portp); - } - kfree(panelp); - } -} - -/*****************************************************************************/ - -/* - * Try to find and initialize an EasyIO board. - */ - -static int __devinit stl_initeio(struct stlbrd *brdp) -{ - struct stlpanel *panelp; - unsigned int status; - char *name; - int retval; - - pr_debug("stl_initeio(brdp=%p)\n", brdp); - - brdp->ioctrl = brdp->ioaddr1 + 1; - brdp->iostatus = brdp->ioaddr1 + 2; - - status = inb(brdp->iostatus); - if ((status & EIO_IDBITMASK) == EIO_MK3) - brdp->ioctrl++; - -/* - * Handle board specific stuff now. The real difference is PCI - * or not PCI. - */ - if (brdp->brdtype == BRD_EASYIOPCI) { - brdp->iosize1 = 0x80; - brdp->iosize2 = 0x80; - name = "serial(EIO-PCI)"; - outb(0x41, (brdp->ioaddr2 + 0x4c)); - } else { - brdp->iosize1 = 8; - name = "serial(EIO)"; - if ((brdp->irq < 0) || (brdp->irq > 15) || - (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { - printk("STALLION: invalid irq=%d for brd=%d\n", - brdp->irq, brdp->brdnr); - retval = -EINVAL; - goto err; - } - outb((stl_vecmap[brdp->irq] | EIO_0WS | - ((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)), - brdp->ioctrl); - } - - retval = -EBUSY; - if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) { - printk(KERN_WARNING "STALLION: Warning, board %d I/O address " - "%x conflicts with another device\n", brdp->brdnr, - brdp->ioaddr1); - goto err; - } - - if (brdp->iosize2 > 0) - if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) { - printk(KERN_WARNING "STALLION: Warning, board %d I/O " - "address %x conflicts with another device\n", - brdp->brdnr, brdp->ioaddr2); - printk(KERN_WARNING "STALLION: Warning, also " - "releasing board %d I/O address %x \n", - brdp->brdnr, brdp->ioaddr1); - goto err_rel1; - } - -/* - * Everything looks OK, so let's go ahead and probe for the hardware. - */ - brdp->clk = CD1400_CLK; - brdp->isr = stl_eiointr; - - retval = -ENODEV; - switch (status & EIO_IDBITMASK) { - case EIO_8PORTM: - brdp->clk = CD1400_CLK8M; - /* fall thru */ - case EIO_8PORTRS: - case EIO_8PORTDI: - brdp->nrports = 8; - break; - case EIO_4PORTRS: - brdp->nrports = 4; - break; - case EIO_MK3: - switch (status & EIO_BRDMASK) { - case ID_BRD4: - brdp->nrports = 4; - break; - case ID_BRD8: - brdp->nrports = 8; - break; - case ID_BRD16: - brdp->nrports = 16; - break; - default: - goto err_rel2; - } - break; - default: - goto err_rel2; - } - -/* - * We have verified that the board is actually present, so now we - * can complete the setup. - */ - - panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL); - if (!panelp) { - printk(KERN_WARNING "STALLION: failed to allocate memory " - "(size=%Zd)\n", sizeof(struct stlpanel)); - retval = -ENOMEM; - goto err_rel2; - } - - panelp->magic = STL_PANELMAGIC; - panelp->brdnr = brdp->brdnr; - panelp->panelnr = 0; - panelp->nrports = brdp->nrports; - panelp->iobase = brdp->ioaddr1; - panelp->hwid = status; - if ((status & EIO_IDBITMASK) == EIO_MK3) { - panelp->uartp = &stl_sc26198uart; - panelp->isr = stl_sc26198intr; - } else { - panelp->uartp = &stl_cd1400uart; - panelp->isr = stl_cd1400eiointr; - } - - brdp->panels[0] = panelp; - brdp->nrpanels = 1; - brdp->state |= BRD_FOUND; - brdp->hwid = status; - if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) { - printk("STALLION: failed to register interrupt " - "routine for %s irq=%d\n", name, brdp->irq); - retval = -ENODEV; - goto err_fr; - } - - return 0; -err_fr: - stl_cleanup_panels(brdp); -err_rel2: - if (brdp->iosize2 > 0) - release_region(brdp->ioaddr2, brdp->iosize2); -err_rel1: - release_region(brdp->ioaddr1, brdp->iosize1); -err: - return retval; -} - -/*****************************************************************************/ - -/* - * Try to find an ECH board and initialize it. This code is capable of - * dealing with all types of ECH board. - */ - -static int __devinit stl_initech(struct stlbrd *brdp) -{ - struct stlpanel *panelp; - unsigned int status, nxtid, ioaddr, conflict, panelnr, banknr, i; - int retval; - char *name; - - pr_debug("stl_initech(brdp=%p)\n", brdp); - - status = 0; - conflict = 0; - -/* - * Set up the initial board register contents for boards. This varies a - * bit between the different board types. So we need to handle each - * separately. Also do a check that the supplied IRQ is good. - */ - switch (brdp->brdtype) { - - case BRD_ECH: - brdp->isr = stl_echatintr; - brdp->ioctrl = brdp->ioaddr1 + 1; - brdp->iostatus = brdp->ioaddr1 + 1; - status = inb(brdp->iostatus); - if ((status & ECH_IDBITMASK) != ECH_ID) { - retval = -ENODEV; - goto err; - } - if ((brdp->irq < 0) || (brdp->irq > 15) || - (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { - printk("STALLION: invalid irq=%d for brd=%d\n", - brdp->irq, brdp->brdnr); - retval = -EINVAL; - goto err; - } - status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1); - status |= (stl_vecmap[brdp->irq] << 1); - outb((status | ECH_BRDRESET), brdp->ioaddr1); - brdp->ioctrlval = ECH_INTENABLE | - ((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE); - for (i = 0; i < 10; i++) - outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl); - brdp->iosize1 = 2; - brdp->iosize2 = 32; - name = "serial(EC8/32)"; - outb(status, brdp->ioaddr1); - break; - - case BRD_ECHMC: - brdp->isr = stl_echmcaintr; - brdp->ioctrl = brdp->ioaddr1 + 0x20; - brdp->iostatus = brdp->ioctrl; - status = inb(brdp->iostatus); - if ((status & ECH_IDBITMASK) != ECH_ID) { - retval = -ENODEV; - goto err; - } - if ((brdp->irq < 0) || (brdp->irq > 15) || - (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { - printk("STALLION: invalid irq=%d for brd=%d\n", - brdp->irq, brdp->brdnr); - retval = -EINVAL; - goto err; - } - outb(ECHMC_BRDRESET, brdp->ioctrl); - outb(ECHMC_INTENABLE, brdp->ioctrl); - brdp->iosize1 = 64; - name = "serial(EC8/32-MC)"; - break; - - case BRD_ECHPCI: - brdp->isr = stl_echpciintr; - brdp->ioctrl = brdp->ioaddr1 + 2; - brdp->iosize1 = 4; - brdp->iosize2 = 8; - name = "serial(EC8/32-PCI)"; - break; - - case BRD_ECH64PCI: - brdp->isr = stl_echpci64intr; - brdp->ioctrl = brdp->ioaddr2 + 0x40; - outb(0x43, (brdp->ioaddr1 + 0x4c)); - brdp->iosize1 = 0x80; - brdp->iosize2 = 0x80; - name = "serial(EC8/64-PCI)"; - break; - - default: - printk("STALLION: unknown board type=%d\n", brdp->brdtype); - retval = -EINVAL; - goto err; - } - -/* - * Check boards for possible IO address conflicts and return fail status - * if an IO conflict found. - */ - retval = -EBUSY; - if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) { - printk(KERN_WARNING "STALLION: Warning, board %d I/O address " - "%x conflicts with another device\n", brdp->brdnr, - brdp->ioaddr1); - goto err; - } - - if (brdp->iosize2 > 0) - if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) { - printk(KERN_WARNING "STALLION: Warning, board %d I/O " - "address %x conflicts with another device\n", - brdp->brdnr, brdp->ioaddr2); - printk(KERN_WARNING "STALLION: Warning, also " - "releasing board %d I/O address %x \n", - brdp->brdnr, brdp->ioaddr1); - goto err_rel1; - } - -/* - * Scan through the secondary io address space looking for panels. - * As we find'em allocate and initialize panel structures for each. - */ - brdp->clk = CD1400_CLK; - brdp->hwid = status; - - ioaddr = brdp->ioaddr2; - banknr = 0; - panelnr = 0; - nxtid = 0; - - for (i = 0; i < STL_MAXPANELS; i++) { - if (brdp->brdtype == BRD_ECHPCI) { - outb(nxtid, brdp->ioctrl); - ioaddr = brdp->ioaddr2; - } - status = inb(ioaddr + ECH_PNLSTATUS); - if ((status & ECH_PNLIDMASK) != nxtid) - break; - panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL); - if (!panelp) { - printk("STALLION: failed to allocate memory " - "(size=%Zd)\n", sizeof(struct stlpanel)); - retval = -ENOMEM; - goto err_fr; - } - panelp->magic = STL_PANELMAGIC; - panelp->brdnr = brdp->brdnr; - panelp->panelnr = panelnr; - panelp->iobase = ioaddr; - panelp->pagenr = nxtid; - panelp->hwid = status; - brdp->bnk2panel[banknr] = panelp; - brdp->bnkpageaddr[banknr] = nxtid; - brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS; - - if (status & ECH_PNLXPID) { - panelp->uartp = &stl_sc26198uart; - panelp->isr = stl_sc26198intr; - if (status & ECH_PNL16PORT) { - panelp->nrports = 16; - brdp->bnk2panel[banknr] = panelp; - brdp->bnkpageaddr[banknr] = nxtid; - brdp->bnkstataddr[banknr++] = ioaddr + 4 + - ECH_PNLSTATUS; - } else - panelp->nrports = 8; - } else { - panelp->uartp = &stl_cd1400uart; - panelp->isr = stl_cd1400echintr; - if (status & ECH_PNL16PORT) { - panelp->nrports = 16; - panelp->ackmask = 0x80; - if (brdp->brdtype != BRD_ECHPCI) - ioaddr += EREG_BANKSIZE; - brdp->bnk2panel[banknr] = panelp; - brdp->bnkpageaddr[banknr] = ++nxtid; - brdp->bnkstataddr[banknr++] = ioaddr + - ECH_PNLSTATUS; - } else { - panelp->nrports = 8; - panelp->ackmask = 0xc0; - } - } - - nxtid++; - ioaddr += EREG_BANKSIZE; - brdp->nrports += panelp->nrports; - brdp->panels[panelnr++] = panelp; - if ((brdp->brdtype != BRD_ECHPCI) && - (ioaddr >= (brdp->ioaddr2 + brdp->iosize2))) { - retval = -EINVAL; - goto err_fr; - } - } - - brdp->nrpanels = panelnr; - brdp->nrbnks = banknr; - if (brdp->brdtype == BRD_ECH) - outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl); - - brdp->state |= BRD_FOUND; - if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) { - printk("STALLION: failed to register interrupt " - "routine for %s irq=%d\n", name, brdp->irq); - retval = -ENODEV; - goto err_fr; - } - - return 0; -err_fr: - stl_cleanup_panels(brdp); - if (brdp->iosize2 > 0) - release_region(brdp->ioaddr2, brdp->iosize2); -err_rel1: - release_region(brdp->ioaddr1, brdp->iosize1); -err: - return retval; -} - -/*****************************************************************************/ - -/* - * Initialize and configure the specified board. - * Scan through all the boards in the configuration and see what we - * can find. Handle EIO and the ECH boards a little differently here - * since the initial search and setup is very different. - */ - -static int __devinit stl_brdinit(struct stlbrd *brdp) -{ - int i, retval; - - pr_debug("stl_brdinit(brdp=%p)\n", brdp); - - switch (brdp->brdtype) { - case BRD_EASYIO: - case BRD_EASYIOPCI: - retval = stl_initeio(brdp); - if (retval) - goto err; - break; - case BRD_ECH: - case BRD_ECHMC: - case BRD_ECHPCI: - case BRD_ECH64PCI: - retval = stl_initech(brdp); - if (retval) - goto err; - break; - default: - printk("STALLION: board=%d is unknown board type=%d\n", - brdp->brdnr, brdp->brdtype); - retval = -ENODEV; - goto err; - } - - if ((brdp->state & BRD_FOUND) == 0) { - printk("STALLION: %s board not found, board=%d io=%x irq=%d\n", - stl_brdnames[brdp->brdtype], brdp->brdnr, - brdp->ioaddr1, brdp->irq); - goto err_free; - } - - for (i = 0; i < STL_MAXPANELS; i++) - if (brdp->panels[i] != NULL) - stl_initports(brdp, brdp->panels[i]); - - printk("STALLION: %s found, board=%d io=%x irq=%d " - "nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype], - brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels, - brdp->nrports); - - return 0; -err_free: - free_irq(brdp->irq, brdp); - - stl_cleanup_panels(brdp); - - release_region(brdp->ioaddr1, brdp->iosize1); - if (brdp->iosize2 > 0) - release_region(brdp->ioaddr2, brdp->iosize2); -err: - return retval; -} - -/*****************************************************************************/ - -/* - * Find the next available board number that is free. - */ - -static int __devinit stl_getbrdnr(void) -{ - unsigned int i; - - for (i = 0; i < STL_MAXBRDS; i++) - if (stl_brds[i] == NULL) { - if (i >= stl_nrbrds) - stl_nrbrds = i + 1; - return i; - } - - return -1; -} - -/*****************************************************************************/ -/* - * We have a Stallion board. Allocate a board structure and - * initialize it. Read its IO and IRQ resources from PCI - * configuration space. - */ - -static int __devinit stl_pciprobe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct stlbrd *brdp; - unsigned int i, brdtype = ent->driver_data; - int brdnr, retval = -ENODEV; - - if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) - goto err; - - retval = pci_enable_device(pdev); - if (retval) - goto err; - brdp = stl_allocbrd(); - if (brdp == NULL) { - retval = -ENOMEM; - goto err; - } - mutex_lock(&stl_brdslock); - brdnr = stl_getbrdnr(); - if (brdnr < 0) { - dev_err(&pdev->dev, "too many boards found, " - "maximum supported %d\n", STL_MAXBRDS); - mutex_unlock(&stl_brdslock); - retval = -ENODEV; - goto err_fr; - } - brdp->brdnr = (unsigned int)brdnr; - stl_brds[brdp->brdnr] = brdp; - mutex_unlock(&stl_brdslock); - - brdp->brdtype = brdtype; - brdp->state |= STL_PROBED; - -/* - * We have all resources from the board, so let's setup the actual - * board structure now. - */ - switch (brdtype) { - case BRD_ECHPCI: - brdp->ioaddr2 = pci_resource_start(pdev, 0); - brdp->ioaddr1 = pci_resource_start(pdev, 1); - break; - case BRD_ECH64PCI: - brdp->ioaddr2 = pci_resource_start(pdev, 2); - brdp->ioaddr1 = pci_resource_start(pdev, 1); - break; - case BRD_EASYIOPCI: - brdp->ioaddr1 = pci_resource_start(pdev, 2); - brdp->ioaddr2 = pci_resource_start(pdev, 1); - break; - default: - dev_err(&pdev->dev, "unknown PCI board type=%u\n", brdtype); - break; - } - - brdp->irq = pdev->irq; - retval = stl_brdinit(brdp); - if (retval) - goto err_null; - - pci_set_drvdata(pdev, brdp); - - for (i = 0; i < brdp->nrports; i++) - tty_register_device(stl_serial, - brdp->brdnr * STL_MAXPORTS + i, &pdev->dev); - - return 0; -err_null: - stl_brds[brdp->brdnr] = NULL; -err_fr: - kfree(brdp); -err: - return retval; -} - -static void __devexit stl_pciremove(struct pci_dev *pdev) -{ - struct stlbrd *brdp = pci_get_drvdata(pdev); - unsigned int i; - - free_irq(brdp->irq, brdp); - - stl_cleanup_panels(brdp); - - release_region(brdp->ioaddr1, brdp->iosize1); - if (brdp->iosize2 > 0) - release_region(brdp->ioaddr2, brdp->iosize2); - - for (i = 0; i < brdp->nrports; i++) - tty_unregister_device(stl_serial, - brdp->brdnr * STL_MAXPORTS + i); - - stl_brds[brdp->brdnr] = NULL; - kfree(brdp); -} - -static struct pci_driver stl_pcidriver = { - .name = "stallion", - .id_table = stl_pcibrds, - .probe = stl_pciprobe, - .remove = __devexit_p(stl_pciremove) -}; - -/*****************************************************************************/ - -/* - * Return the board stats structure to user app. - */ - -static int stl_getbrdstats(combrd_t __user *bp) -{ - combrd_t stl_brdstats; - struct stlbrd *brdp; - struct stlpanel *panelp; - unsigned int i; - - if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t))) - return -EFAULT; - if (stl_brdstats.brd >= STL_MAXBRDS) - return -ENODEV; - brdp = stl_brds[stl_brdstats.brd]; - if (brdp == NULL) - return -ENODEV; - - memset(&stl_brdstats, 0, sizeof(combrd_t)); - stl_brdstats.brd = brdp->brdnr; - stl_brdstats.type = brdp->brdtype; - stl_brdstats.hwid = brdp->hwid; - stl_brdstats.state = brdp->state; - stl_brdstats.ioaddr = brdp->ioaddr1; - stl_brdstats.ioaddr2 = brdp->ioaddr2; - stl_brdstats.irq = brdp->irq; - stl_brdstats.nrpanels = brdp->nrpanels; - stl_brdstats.nrports = brdp->nrports; - for (i = 0; i < brdp->nrpanels; i++) { - panelp = brdp->panels[i]; - stl_brdstats.panels[i].panel = i; - stl_brdstats.panels[i].hwid = panelp->hwid; - stl_brdstats.panels[i].nrports = panelp->nrports; - } - - return copy_to_user(bp, &stl_brdstats, sizeof(combrd_t)) ? -EFAULT : 0; -} - -/*****************************************************************************/ - -/* - * Resolve the referenced port number into a port struct pointer. - */ - -static struct stlport *stl_getport(int brdnr, int panelnr, int portnr) -{ - struct stlbrd *brdp; - struct stlpanel *panelp; - - if (brdnr < 0 || brdnr >= STL_MAXBRDS) - return NULL; - brdp = stl_brds[brdnr]; - if (brdp == NULL) - return NULL; - if (panelnr < 0 || (unsigned int)panelnr >= brdp->nrpanels) - return NULL; - panelp = brdp->panels[panelnr]; - if (panelp == NULL) - return NULL; - if (portnr < 0 || (unsigned int)portnr >= panelp->nrports) - return NULL; - return panelp->ports[portnr]; -} - -/*****************************************************************************/ - -/* - * Return the port stats structure to user app. A NULL port struct - * pointer passed in means that we need to find out from the app - * what port to get stats for (used through board control device). - */ - -static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp) -{ - comstats_t stl_comstats; - unsigned char *head, *tail; - unsigned long flags; - - if (!portp) { - if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) - return -EFAULT; - portp = stl_getport(stl_comstats.brd, stl_comstats.panel, - stl_comstats.port); - if (portp == NULL) - return -ENODEV; - } - - mutex_lock(&portp->port.mutex); - portp->stats.state = portp->istate; - portp->stats.flags = portp->port.flags; - portp->stats.hwid = portp->hwid; - - portp->stats.ttystate = 0; - portp->stats.cflags = 0; - portp->stats.iflags = 0; - portp->stats.oflags = 0; - portp->stats.lflags = 0; - portp->stats.rxbuffered = 0; - - spin_lock_irqsave(&stallion_lock, flags); - if (tty != NULL && portp->port.tty == tty) { - portp->stats.ttystate = tty->flags; - /* No longer available as a statistic */ - portp->stats.rxbuffered = 1; /*tty->flip.count; */ - if (tty->termios != NULL) { - portp->stats.cflags = tty->termios->c_cflag; - portp->stats.iflags = tty->termios->c_iflag; - portp->stats.oflags = tty->termios->c_oflag; - portp->stats.lflags = tty->termios->c_lflag; - } - } - spin_unlock_irqrestore(&stallion_lock, flags); - - head = portp->tx.head; - tail = portp->tx.tail; - portp->stats.txbuffered = (head >= tail) ? (head - tail) : - (STL_TXBUFSIZE - (tail - head)); - - portp->stats.signals = (unsigned long) stl_getsignals(portp); - mutex_unlock(&portp->port.mutex); - - return copy_to_user(cp, &portp->stats, - sizeof(comstats_t)) ? -EFAULT : 0; -} - -/*****************************************************************************/ - -/* - * Clear the port stats structure. We also return it zeroed out... - */ - -static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp) -{ - comstats_t stl_comstats; - - if (!portp) { - if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) - return -EFAULT; - portp = stl_getport(stl_comstats.brd, stl_comstats.panel, - stl_comstats.port); - if (portp == NULL) - return -ENODEV; - } - - mutex_lock(&portp->port.mutex); - memset(&portp->stats, 0, sizeof(comstats_t)); - portp->stats.brd = portp->brdnr; - portp->stats.panel = portp->panelnr; - portp->stats.port = portp->portnr; - mutex_unlock(&portp->port.mutex); - return copy_to_user(cp, &portp->stats, - sizeof(comstats_t)) ? -EFAULT : 0; -} - -/*****************************************************************************/ - -/* - * Return the entire driver ports structure to a user app. - */ - -static int stl_getportstruct(struct stlport __user *arg) -{ - struct stlport stl_dummyport; - struct stlport *portp; - - if (copy_from_user(&stl_dummyport, arg, sizeof(struct stlport))) - return -EFAULT; - portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr, - stl_dummyport.portnr); - if (!portp) - return -ENODEV; - return copy_to_user(arg, portp, sizeof(struct stlport)) ? -EFAULT : 0; -} - -/*****************************************************************************/ - -/* - * Return the entire driver board structure to a user app. - */ - -static int stl_getbrdstruct(struct stlbrd __user *arg) -{ - struct stlbrd stl_dummybrd; - struct stlbrd *brdp; - - if (copy_from_user(&stl_dummybrd, arg, sizeof(struct stlbrd))) - return -EFAULT; - if (stl_dummybrd.brdnr >= STL_MAXBRDS) - return -ENODEV; - brdp = stl_brds[stl_dummybrd.brdnr]; - if (!brdp) - return -ENODEV; - return copy_to_user(arg, brdp, sizeof(struct stlbrd)) ? -EFAULT : 0; -} - -/*****************************************************************************/ - -/* - * The "staliomem" device is also required to do some special operations - * on the board and/or ports. In this driver it is mostly used for stats - * collection. - */ - -static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) -{ - int brdnr, rc; - void __user *argp = (void __user *)arg; - - pr_debug("stl_memioctl(fp=%p,cmd=%x,arg=%lx)\n", fp, cmd,arg); - - brdnr = iminor(fp->f_dentry->d_inode); - if (brdnr >= STL_MAXBRDS) - return -ENODEV; - rc = 0; - - switch (cmd) { - case COM_GETPORTSTATS: - rc = stl_getportstats(NULL, NULL, argp); - break; - case COM_CLRPORTSTATS: - rc = stl_clrportstats(NULL, argp); - break; - case COM_GETBRDSTATS: - rc = stl_getbrdstats(argp); - break; - case COM_READPORT: - rc = stl_getportstruct(argp); - break; - case COM_READBOARD: - rc = stl_getbrdstruct(argp); - break; - default: - rc = -ENOIOCTLCMD; - break; - } - return rc; -} - -static const struct tty_operations stl_ops = { - .open = stl_open, - .close = stl_close, - .write = stl_write, - .put_char = stl_putchar, - .flush_chars = stl_flushchars, - .write_room = stl_writeroom, - .chars_in_buffer = stl_charsinbuffer, - .ioctl = stl_ioctl, - .set_termios = stl_settermios, - .throttle = stl_throttle, - .unthrottle = stl_unthrottle, - .stop = stl_stop, - .start = stl_start, - .hangup = stl_hangup, - .flush_buffer = stl_flushbuffer, - .break_ctl = stl_breakctl, - .wait_until_sent = stl_waituntilsent, - .send_xchar = stl_sendxchar, - .tiocmget = stl_tiocmget, - .tiocmset = stl_tiocmset, - .proc_fops = &stl_proc_fops, -}; - -static const struct tty_port_operations stl_port_ops = { - .carrier_raised = stl_carrier_raised, - .dtr_rts = stl_dtr_rts, - .activate = stl_activate, - .shutdown = stl_shutdown, -}; - -/*****************************************************************************/ -/* CD1400 HARDWARE FUNCTIONS */ -/*****************************************************************************/ - -/* - * These functions get/set/update the registers of the cd1400 UARTs. - * Access to the cd1400 registers is via an address/data io port pair. - * (Maybe should make this inline...) - */ - -static int stl_cd1400getreg(struct stlport *portp, int regnr) -{ - outb((regnr + portp->uartaddr), portp->ioaddr); - return inb(portp->ioaddr + EREG_DATA); -} - -static void stl_cd1400setreg(struct stlport *portp, int regnr, int value) -{ - outb(regnr + portp->uartaddr, portp->ioaddr); - outb(value, portp->ioaddr + EREG_DATA); -} - -static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value) -{ - outb(regnr + portp->uartaddr, portp->ioaddr); - if (inb(portp->ioaddr + EREG_DATA) != value) { - outb(value, portp->ioaddr + EREG_DATA); - return 1; - } - return 0; -} - -/*****************************************************************************/ - -/* - * Inbitialize the UARTs in a panel. We don't care what sort of board - * these ports are on - since the port io registers are almost - * identical when dealing with ports. - */ - -static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp) -{ - unsigned int gfrcr; - int chipmask, i, j; - int nrchips, uartaddr, ioaddr; - unsigned long flags; - - pr_debug("stl_panelinit(brdp=%p,panelp=%p)\n", brdp, panelp); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(panelp->brdnr, panelp->pagenr); - -/* - * Check that each chip is present and started up OK. - */ - chipmask = 0; - nrchips = panelp->nrports / CD1400_PORTS; - for (i = 0; i < nrchips; i++) { - if (brdp->brdtype == BRD_ECHPCI) { - outb((panelp->pagenr + (i >> 1)), brdp->ioctrl); - ioaddr = panelp->iobase; - } else - ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1)); - uartaddr = (i & 0x01) ? 0x080 : 0; - outb((GFRCR + uartaddr), ioaddr); - outb(0, (ioaddr + EREG_DATA)); - outb((CCR + uartaddr), ioaddr); - outb(CCR_RESETFULL, (ioaddr + EREG_DATA)); - outb(CCR_RESETFULL, (ioaddr + EREG_DATA)); - outb((GFRCR + uartaddr), ioaddr); - for (j = 0; j < CCR_MAXWAIT; j++) - if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0) - break; - - if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) { - printk("STALLION: cd1400 not responding, " - "brd=%d panel=%d chip=%d\n", - panelp->brdnr, panelp->panelnr, i); - continue; - } - chipmask |= (0x1 << i); - outb((PPR + uartaddr), ioaddr); - outb(PPR_SCALAR, (ioaddr + EREG_DATA)); - } - - BRDDISABLE(panelp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); - return chipmask; -} - -/*****************************************************************************/ - -/* - * Initialize hardware specific port registers. - */ - -static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp) -{ - unsigned long flags; - pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp, - panelp, portp); - - if ((brdp == NULL) || (panelp == NULL) || - (portp == NULL)) - return; - - spin_lock_irqsave(&brd_lock, flags); - portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) || - (portp->portnr < 8)) ? 0 : EREG_BANKSIZE); - portp->uartaddr = (portp->portnr & 0x04) << 5; - portp->pagenr = panelp->pagenr + (portp->portnr >> 3); - - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - stl_cd1400setreg(portp, LIVR, (portp->portnr << 3)); - portp->hwid = stl_cd1400getreg(portp, GFRCR); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Wait for the command register to be ready. We will poll this, - * since it won't usually take too long to be ready. - */ - -static void stl_cd1400ccrwait(struct stlport *portp) -{ - int i; - - for (i = 0; i < CCR_MAXWAIT; i++) - if (stl_cd1400getreg(portp, CCR) == 0) - return; - - printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n", - portp->portnr, portp->panelnr, portp->brdnr); -} - -/*****************************************************************************/ - -/* - * Set up the cd1400 registers for a port based on the termios port - * settings. - */ - -static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp) -{ - struct stlbrd *brdp; - unsigned long flags; - unsigned int clkdiv, baudrate; - unsigned char cor1, cor2, cor3; - unsigned char cor4, cor5, ccr; - unsigned char srer, sreron, sreroff; - unsigned char mcor1, mcor2, rtpr; - unsigned char clk, div; - - cor1 = 0; - cor2 = 0; - cor3 = 0; - cor4 = 0; - cor5 = 0; - ccr = 0; - rtpr = 0; - clk = 0; - div = 0; - mcor1 = 0; - mcor2 = 0; - sreron = 0; - sreroff = 0; - - brdp = stl_brds[portp->brdnr]; - if (brdp == NULL) - return; - -/* - * Set up the RX char ignore mask with those RX error types we - * can ignore. We can get the cd1400 to help us out a little here, - * it will ignore parity errors and breaks for us. - */ - portp->rxignoremsk = 0; - if (tiosp->c_iflag & IGNPAR) { - portp->rxignoremsk |= (ST_PARITY | ST_FRAMING | ST_OVERRUN); - cor1 |= COR1_PARIGNORE; - } - if (tiosp->c_iflag & IGNBRK) { - portp->rxignoremsk |= ST_BREAK; - cor4 |= COR4_IGNBRK; - } - - portp->rxmarkmsk = ST_OVERRUN; - if (tiosp->c_iflag & (INPCK | PARMRK)) - portp->rxmarkmsk |= (ST_PARITY | ST_FRAMING); - if (tiosp->c_iflag & BRKINT) - portp->rxmarkmsk |= ST_BREAK; - -/* - * Go through the char size, parity and stop bits and set all the - * option register appropriately. - */ - switch (tiosp->c_cflag & CSIZE) { - case CS5: - cor1 |= COR1_CHL5; - break; - case CS6: - cor1 |= COR1_CHL6; - break; - case CS7: - cor1 |= COR1_CHL7; - break; - default: - cor1 |= COR1_CHL8; - break; - } - - if (tiosp->c_cflag & CSTOPB) - cor1 |= COR1_STOP2; - else - cor1 |= COR1_STOP1; - - if (tiosp->c_cflag & PARENB) { - if (tiosp->c_cflag & PARODD) - cor1 |= (COR1_PARENB | COR1_PARODD); - else - cor1 |= (COR1_PARENB | COR1_PAREVEN); - } else { - cor1 |= COR1_PARNONE; - } - -/* - * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing - * space for hardware flow control and the like. This should be set to - * VMIN. Also here we will set the RX data timeout to 10ms - this should - * really be based on VTIME. - */ - cor3 |= FIFO_RXTHRESHOLD; - rtpr = 2; - -/* - * Calculate the baud rate timers. For now we will just assume that - * the input and output baud are the same. Could have used a baud - * table here, but this way we can generate virtually any baud rate - * we like! - */ - baudrate = tiosp->c_cflag & CBAUD; - if (baudrate & CBAUDEX) { - baudrate &= ~CBAUDEX; - if ((baudrate < 1) || (baudrate > 4)) - tiosp->c_cflag &= ~CBAUDEX; - else - baudrate += 15; - } - baudrate = stl_baudrates[baudrate]; - if ((tiosp->c_cflag & CBAUD) == B38400) { - if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baudrate = 57600; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baudrate = 115200; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - baudrate = 230400; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - baudrate = 460800; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) - baudrate = (portp->baud_base / portp->custom_divisor); - } - if (baudrate > STL_CD1400MAXBAUD) - baudrate = STL_CD1400MAXBAUD; - - if (baudrate > 0) { - for (clk = 0; clk < CD1400_NUMCLKS; clk++) { - clkdiv = (portp->clk / stl_cd1400clkdivs[clk]) / baudrate; - if (clkdiv < 0x100) - break; - } - div = (unsigned char) clkdiv; - } - -/* - * Check what form of modem signaling is required and set it up. - */ - if ((tiosp->c_cflag & CLOCAL) == 0) { - mcor1 |= MCOR1_DCD; - mcor2 |= MCOR2_DCD; - sreron |= SRER_MODEM; - portp->port.flags |= ASYNC_CHECK_CD; - } else - portp->port.flags &= ~ASYNC_CHECK_CD; - -/* - * Setup cd1400 enhanced modes if we can. In particular we want to - * handle as much of the flow control as possible automatically. As - * well as saving a few CPU cycles it will also greatly improve flow - * control reliability. - */ - if (tiosp->c_iflag & IXON) { - cor2 |= COR2_TXIBE; - cor3 |= COR3_SCD12; - if (tiosp->c_iflag & IXANY) - cor2 |= COR2_IXM; - } - - if (tiosp->c_cflag & CRTSCTS) { - cor2 |= COR2_CTSAE; - mcor1 |= FIFO_RTSTHRESHOLD; - } - -/* - * All cd1400 register values calculated so go through and set - * them all up. - */ - - pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", - portp->portnr, portp->panelnr, portp->brdnr); - pr_debug(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n", - cor1, cor2, cor3, cor4, cor5); - pr_debug(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n", - mcor1, mcor2, rtpr, sreron, sreroff); - pr_debug(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div); - pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n", - tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], - tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3)); - srer = stl_cd1400getreg(portp, SRER); - stl_cd1400setreg(portp, SRER, 0); - if (stl_cd1400updatereg(portp, COR1, cor1)) - ccr = 1; - if (stl_cd1400updatereg(portp, COR2, cor2)) - ccr = 1; - if (stl_cd1400updatereg(portp, COR3, cor3)) - ccr = 1; - if (ccr) { - stl_cd1400ccrwait(portp); - stl_cd1400setreg(portp, CCR, CCR_CORCHANGE); - } - stl_cd1400setreg(portp, COR4, cor4); - stl_cd1400setreg(portp, COR5, cor5); - stl_cd1400setreg(portp, MCOR1, mcor1); - stl_cd1400setreg(portp, MCOR2, mcor2); - if (baudrate > 0) { - stl_cd1400setreg(portp, TCOR, clk); - stl_cd1400setreg(portp, TBPR, div); - stl_cd1400setreg(portp, RCOR, clk); - stl_cd1400setreg(portp, RBPR, div); - } - stl_cd1400setreg(portp, SCHR1, tiosp->c_cc[VSTART]); - stl_cd1400setreg(portp, SCHR2, tiosp->c_cc[VSTOP]); - stl_cd1400setreg(portp, SCHR3, tiosp->c_cc[VSTART]); - stl_cd1400setreg(portp, SCHR4, tiosp->c_cc[VSTOP]); - stl_cd1400setreg(portp, RTPR, rtpr); - mcor1 = stl_cd1400getreg(portp, MSVR1); - if (mcor1 & MSVR1_DCD) - portp->sigs |= TIOCM_CD; - else - portp->sigs &= ~TIOCM_CD; - stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron)); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Set the state of the DTR and RTS signals. - */ - -static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts) -{ - unsigned char msvr1, msvr2; - unsigned long flags; - - pr_debug("stl_cd1400setsignals(portp=%p,dtr=%d,rts=%d)\n", - portp, dtr, rts); - - msvr1 = 0; - msvr2 = 0; - if (dtr > 0) - msvr1 = MSVR1_DTR; - if (rts > 0) - msvr2 = MSVR2_RTS; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - if (rts >= 0) - stl_cd1400setreg(portp, MSVR2, msvr2); - if (dtr >= 0) - stl_cd1400setreg(portp, MSVR1, msvr1); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Return the state of the signals. - */ - -static int stl_cd1400getsignals(struct stlport *portp) -{ - unsigned char msvr1, msvr2; - unsigned long flags; - int sigs; - - pr_debug("stl_cd1400getsignals(portp=%p)\n", portp); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - msvr1 = stl_cd1400getreg(portp, MSVR1); - msvr2 = stl_cd1400getreg(portp, MSVR2); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); - - sigs = 0; - sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0; - sigs |= (msvr1 & MSVR1_CTS) ? TIOCM_CTS : 0; - sigs |= (msvr1 & MSVR1_DTR) ? TIOCM_DTR : 0; - sigs |= (msvr2 & MSVR2_RTS) ? TIOCM_RTS : 0; -#if 0 - sigs |= (msvr1 & MSVR1_RI) ? TIOCM_RI : 0; - sigs |= (msvr1 & MSVR1_DSR) ? TIOCM_DSR : 0; -#else - sigs |= TIOCM_DSR; -#endif - return sigs; -} - -/*****************************************************************************/ - -/* - * Enable/Disable the Transmitter and/or Receiver. - */ - -static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx) -{ - unsigned char ccr; - unsigned long flags; - - pr_debug("stl_cd1400enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); - - ccr = 0; - - if (tx == 0) - ccr |= CCR_TXDISABLE; - else if (tx > 0) - ccr |= CCR_TXENABLE; - if (rx == 0) - ccr |= CCR_RXDISABLE; - else if (rx > 0) - ccr |= CCR_RXENABLE; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - stl_cd1400ccrwait(portp); - stl_cd1400setreg(portp, CCR, ccr); - stl_cd1400ccrwait(portp); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Start/stop the Transmitter and/or Receiver. - */ - -static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx) -{ - unsigned char sreron, sreroff; - unsigned long flags; - - pr_debug("stl_cd1400startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); - - sreron = 0; - sreroff = 0; - if (tx == 0) - sreroff |= (SRER_TXDATA | SRER_TXEMPTY); - else if (tx == 1) - sreron |= SRER_TXDATA; - else if (tx >= 2) - sreron |= SRER_TXEMPTY; - if (rx == 0) - sreroff |= SRER_RXDATA; - else if (rx > 0) - sreron |= SRER_RXDATA; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - stl_cd1400setreg(portp, SRER, - ((stl_cd1400getreg(portp, SRER) & ~sreroff) | sreron)); - BRDDISABLE(portp->brdnr); - if (tx > 0) - set_bit(ASYI_TXBUSY, &portp->istate); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Disable all interrupts from this port. - */ - -static void stl_cd1400disableintrs(struct stlport *portp) -{ - unsigned long flags; - - pr_debug("stl_cd1400disableintrs(portp=%p)\n", portp); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - stl_cd1400setreg(portp, SRER, 0); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -static void stl_cd1400sendbreak(struct stlport *portp, int len) -{ - unsigned long flags; - - pr_debug("stl_cd1400sendbreak(portp=%p,len=%d)\n", portp, len); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - stl_cd1400setreg(portp, SRER, - ((stl_cd1400getreg(portp, SRER) & ~SRER_TXDATA) | - SRER_TXEMPTY)); - BRDDISABLE(portp->brdnr); - portp->brklen = len; - if (len == 1) - portp->stats.txbreaks++; - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Take flow control actions... - */ - -static void stl_cd1400flowctrl(struct stlport *portp, int state) -{ - struct tty_struct *tty; - unsigned long flags; - - pr_debug("stl_cd1400flowctrl(portp=%p,state=%x)\n", portp, state); - - if (portp == NULL) - return; - tty = tty_port_tty_get(&portp->port); - if (tty == NULL) - return; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - - if (state) { - if (tty->termios->c_iflag & IXOFF) { - stl_cd1400ccrwait(portp); - stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1); - portp->stats.rxxon++; - stl_cd1400ccrwait(portp); - } -/* - * Question: should we return RTS to what it was before? It may - * have been set by an ioctl... Suppose not, since if you have - * hardware flow control set then it is pretty silly to go and - * set the RTS line by hand. - */ - if (tty->termios->c_cflag & CRTSCTS) { - stl_cd1400setreg(portp, MCOR1, - (stl_cd1400getreg(portp, MCOR1) | - FIFO_RTSTHRESHOLD)); - stl_cd1400setreg(portp, MSVR2, MSVR2_RTS); - portp->stats.rxrtson++; - } - } else { - if (tty->termios->c_iflag & IXOFF) { - stl_cd1400ccrwait(portp); - stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2); - portp->stats.rxxoff++; - stl_cd1400ccrwait(portp); - } - if (tty->termios->c_cflag & CRTSCTS) { - stl_cd1400setreg(portp, MCOR1, - (stl_cd1400getreg(portp, MCOR1) & 0xf0)); - stl_cd1400setreg(portp, MSVR2, 0); - portp->stats.rxrtsoff++; - } - } - - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); - tty_kref_put(tty); -} - -/*****************************************************************************/ - -/* - * Send a flow control character... - */ - -static void stl_cd1400sendflow(struct stlport *portp, int state) -{ - struct tty_struct *tty; - unsigned long flags; - - pr_debug("stl_cd1400sendflow(portp=%p,state=%x)\n", portp, state); - - if (portp == NULL) - return; - tty = tty_port_tty_get(&portp->port); - if (tty == NULL) - return; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - if (state) { - stl_cd1400ccrwait(portp); - stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1); - portp->stats.rxxon++; - stl_cd1400ccrwait(portp); - } else { - stl_cd1400ccrwait(portp); - stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2); - portp->stats.rxxoff++; - stl_cd1400ccrwait(portp); - } - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); - tty_kref_put(tty); -} - -/*****************************************************************************/ - -static void stl_cd1400flush(struct stlport *portp) -{ - unsigned long flags; - - pr_debug("stl_cd1400flush(portp=%p)\n", portp); - - if (portp == NULL) - return; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); - stl_cd1400ccrwait(portp); - stl_cd1400setreg(portp, CCR, CCR_TXFLUSHFIFO); - stl_cd1400ccrwait(portp); - portp->tx.tail = portp->tx.head; - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Return the current state of data flow on this port. This is only - * really interesting when determining if data has fully completed - * transmission or not... This is easy for the cd1400, it accurately - * maintains the busy port flag. - */ - -static int stl_cd1400datastate(struct stlport *portp) -{ - pr_debug("stl_cd1400datastate(portp=%p)\n", portp); - - if (portp == NULL) - return 0; - - return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0; -} - -/*****************************************************************************/ - -/* - * Interrupt service routine for cd1400 EasyIO boards. - */ - -static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase) -{ - unsigned char svrtype; - - pr_debug("stl_cd1400eiointr(panelp=%p,iobase=%x)\n", panelp, iobase); - - spin_lock(&brd_lock); - outb(SVRR, iobase); - svrtype = inb(iobase + EREG_DATA); - if (panelp->nrports > 4) { - outb((SVRR + 0x80), iobase); - svrtype |= inb(iobase + EREG_DATA); - } - - if (svrtype & SVRR_RX) - stl_cd1400rxisr(panelp, iobase); - else if (svrtype & SVRR_TX) - stl_cd1400txisr(panelp, iobase); - else if (svrtype & SVRR_MDM) - stl_cd1400mdmisr(panelp, iobase); - - spin_unlock(&brd_lock); -} - -/*****************************************************************************/ - -/* - * Interrupt service routine for cd1400 panels. - */ - -static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase) -{ - unsigned char svrtype; - - pr_debug("stl_cd1400echintr(panelp=%p,iobase=%x)\n", panelp, iobase); - - outb(SVRR, iobase); - svrtype = inb(iobase + EREG_DATA); - outb((SVRR + 0x80), iobase); - svrtype |= inb(iobase + EREG_DATA); - if (svrtype & SVRR_RX) - stl_cd1400rxisr(panelp, iobase); - else if (svrtype & SVRR_TX) - stl_cd1400txisr(panelp, iobase); - else if (svrtype & SVRR_MDM) - stl_cd1400mdmisr(panelp, iobase); -} - - -/*****************************************************************************/ - -/* - * Unfortunately we need to handle breaks in the TX data stream, since - * this is the only way to generate them on the cd1400. - */ - -static int stl_cd1400breakisr(struct stlport *portp, int ioaddr) -{ - if (portp->brklen == 1) { - outb((COR2 + portp->uartaddr), ioaddr); - outb((inb(ioaddr + EREG_DATA) | COR2_ETC), - (ioaddr + EREG_DATA)); - outb((TDR + portp->uartaddr), ioaddr); - outb(ETC_CMD, (ioaddr + EREG_DATA)); - outb(ETC_STARTBREAK, (ioaddr + EREG_DATA)); - outb((SRER + portp->uartaddr), ioaddr); - outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)), - (ioaddr + EREG_DATA)); - return 1; - } else if (portp->brklen > 1) { - outb((TDR + portp->uartaddr), ioaddr); - outb(ETC_CMD, (ioaddr + EREG_DATA)); - outb(ETC_STOPBREAK, (ioaddr + EREG_DATA)); - portp->brklen = -1; - return 1; - } else { - outb((COR2 + portp->uartaddr), ioaddr); - outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC), - (ioaddr + EREG_DATA)); - portp->brklen = 0; - } - return 0; -} - -/*****************************************************************************/ - -/* - * Transmit interrupt handler. This has gotta be fast! Handling TX - * chars is pretty simple, stuff as many as possible from the TX buffer - * into the cd1400 FIFO. Must also handle TX breaks here, since they - * are embedded as commands in the data stream. Oh no, had to use a goto! - * This could be optimized more, will do when I get time... - * In practice it is possible that interrupts are enabled but that the - * port has been hung up. Need to handle not having any TX buffer here, - * this is done by using the side effect that head and tail will also - * be NULL if the buffer has been freed. - */ - -static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) -{ - struct stlport *portp; - int len, stlen; - char *head, *tail; - unsigned char ioack, srer; - struct tty_struct *tty; - - pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr); - - ioack = inb(ioaddr + EREG_TXACK); - if (((ioack & panelp->ackmask) != 0) || - ((ioack & ACK_TYPMASK) != ACK_TYPTX)) { - printk("STALLION: bad TX interrupt ack value=%x\n", ioack); - return; - } - portp = panelp->ports[(ioack >> 3)]; - -/* - * Unfortunately we need to handle breaks in the data stream, since - * this is the only way to generate them on the cd1400. Do it now if - * a break is to be sent. - */ - if (portp->brklen != 0) - if (stl_cd1400breakisr(portp, ioaddr)) - goto stl_txalldone; - - head = portp->tx.head; - tail = portp->tx.tail; - len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); - if ((len == 0) || ((len < STL_TXBUFLOW) && - (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { - set_bit(ASYI_TXLOW, &portp->istate); - tty = tty_port_tty_get(&portp->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } - } - - if (len == 0) { - outb((SRER + portp->uartaddr), ioaddr); - srer = inb(ioaddr + EREG_DATA); - if (srer & SRER_TXDATA) { - srer = (srer & ~SRER_TXDATA) | SRER_TXEMPTY; - } else { - srer &= ~(SRER_TXDATA | SRER_TXEMPTY); - clear_bit(ASYI_TXBUSY, &portp->istate); - } - outb(srer, (ioaddr + EREG_DATA)); - } else { - len = min(len, CD1400_TXFIFOSIZE); - portp->stats.txtotal += len; - stlen = min_t(unsigned int, len, - (portp->tx.buf + STL_TXBUFSIZE) - tail); - outb((TDR + portp->uartaddr), ioaddr); - outsb((ioaddr + EREG_DATA), tail, stlen); - len -= stlen; - tail += stlen; - if (tail >= (portp->tx.buf + STL_TXBUFSIZE)) - tail = portp->tx.buf; - if (len > 0) { - outsb((ioaddr + EREG_DATA), tail, len); - tail += len; - } - portp->tx.tail = tail; - } - -stl_txalldone: - outb((EOSRR + portp->uartaddr), ioaddr); - outb(0, (ioaddr + EREG_DATA)); -} - -/*****************************************************************************/ - -/* - * Receive character interrupt handler. Determine if we have good chars - * or bad chars and then process appropriately. Good chars are easy - * just shove the lot into the RX buffer and set all status byte to 0. - * If a bad RX char then process as required. This routine needs to be - * fast! In practice it is possible that we get an interrupt on a port - * that is closed. This can happen on hangups - since they completely - * shutdown a port not in user context. Need to handle this case. - */ - -static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr) -{ - struct stlport *portp; - struct tty_struct *tty; - unsigned int ioack, len, buflen; - unsigned char status; - char ch; - - pr_debug("stl_cd1400rxisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr); - - ioack = inb(ioaddr + EREG_RXACK); - if ((ioack & panelp->ackmask) != 0) { - printk("STALLION: bad RX interrupt ack value=%x\n", ioack); - return; - } - portp = panelp->ports[(ioack >> 3)]; - tty = tty_port_tty_get(&portp->port); - - if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) { - outb((RDCR + portp->uartaddr), ioaddr); - len = inb(ioaddr + EREG_DATA); - if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { - len = min_t(unsigned int, len, sizeof(stl_unwanted)); - outb((RDSR + portp->uartaddr), ioaddr); - insb((ioaddr + EREG_DATA), &stl_unwanted[0], len); - portp->stats.rxlost += len; - portp->stats.rxtotal += len; - } else { - len = min(len, buflen); - if (len > 0) { - unsigned char *ptr; - outb((RDSR + portp->uartaddr), ioaddr); - tty_prepare_flip_string(tty, &ptr, len); - insb((ioaddr + EREG_DATA), ptr, len); - tty_schedule_flip(tty); - portp->stats.rxtotal += len; - } - } - } else if ((ioack & ACK_TYPMASK) == ACK_TYPRXBAD) { - outb((RDSR + portp->uartaddr), ioaddr); - status = inb(ioaddr + EREG_DATA); - ch = inb(ioaddr + EREG_DATA); - if (status & ST_PARITY) - portp->stats.rxparity++; - if (status & ST_FRAMING) - portp->stats.rxframing++; - if (status & ST_OVERRUN) - portp->stats.rxoverrun++; - if (status & ST_BREAK) - portp->stats.rxbreaks++; - if (status & ST_SCHARMASK) { - if ((status & ST_SCHARMASK) == ST_SCHAR1) - portp->stats.txxon++; - if ((status & ST_SCHARMASK) == ST_SCHAR2) - portp->stats.txxoff++; - goto stl_rxalldone; - } - if (tty != NULL && (portp->rxignoremsk & status) == 0) { - if (portp->rxmarkmsk & status) { - if (status & ST_BREAK) { - status = TTY_BREAK; - if (portp->port.flags & ASYNC_SAK) { - do_SAK(tty); - BRDENABLE(portp->brdnr, portp->pagenr); - } - } else if (status & ST_PARITY) - status = TTY_PARITY; - else if (status & ST_FRAMING) - status = TTY_FRAME; - else if(status & ST_OVERRUN) - status = TTY_OVERRUN; - else - status = 0; - } else - status = 0; - tty_insert_flip_char(tty, ch, status); - tty_schedule_flip(tty); - } - } else { - printk("STALLION: bad RX interrupt ack value=%x\n", ioack); - tty_kref_put(tty); - return; - } - -stl_rxalldone: - tty_kref_put(tty); - outb((EOSRR + portp->uartaddr), ioaddr); - outb(0, (ioaddr + EREG_DATA)); -} - -/*****************************************************************************/ - -/* - * Modem interrupt handler. The is called when the modem signal line - * (DCD) has changed state. Leave most of the work to the off-level - * processing routine. - */ - -static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr) -{ - struct stlport *portp; - unsigned int ioack; - unsigned char misr; - - pr_debug("stl_cd1400mdmisr(panelp=%p)\n", panelp); - - ioack = inb(ioaddr + EREG_MDACK); - if (((ioack & panelp->ackmask) != 0) || - ((ioack & ACK_TYPMASK) != ACK_TYPMDM)) { - printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack); - return; - } - portp = panelp->ports[(ioack >> 3)]; - - outb((MISR + portp->uartaddr), ioaddr); - misr = inb(ioaddr + EREG_DATA); - if (misr & MISR_DCD) { - stl_cd_change(portp); - portp->stats.modem++; - } - - outb((EOSRR + portp->uartaddr), ioaddr); - outb(0, (ioaddr + EREG_DATA)); -} - -/*****************************************************************************/ -/* SC26198 HARDWARE FUNCTIONS */ -/*****************************************************************************/ - -/* - * These functions get/set/update the registers of the sc26198 UARTs. - * Access to the sc26198 registers is via an address/data io port pair. - * (Maybe should make this inline...) - */ - -static int stl_sc26198getreg(struct stlport *portp, int regnr) -{ - outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); - return inb(portp->ioaddr + XP_DATA); -} - -static void stl_sc26198setreg(struct stlport *portp, int regnr, int value) -{ - outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); - outb(value, (portp->ioaddr + XP_DATA)); -} - -static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value) -{ - outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); - if (inb(portp->ioaddr + XP_DATA) != value) { - outb(value, (portp->ioaddr + XP_DATA)); - return 1; - } - return 0; -} - -/*****************************************************************************/ - -/* - * Functions to get and set the sc26198 global registers. - */ - -static int stl_sc26198getglobreg(struct stlport *portp, int regnr) -{ - outb(regnr, (portp->ioaddr + XP_ADDR)); - return inb(portp->ioaddr + XP_DATA); -} - -#if 0 -static void stl_sc26198setglobreg(struct stlport *portp, int regnr, int value) -{ - outb(regnr, (portp->ioaddr + XP_ADDR)); - outb(value, (portp->ioaddr + XP_DATA)); -} -#endif - -/*****************************************************************************/ - -/* - * Inbitialize the UARTs in a panel. We don't care what sort of board - * these ports are on - since the port io registers are almost - * identical when dealing with ports. - */ - -static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp) -{ - int chipmask, i; - int nrchips, ioaddr; - - pr_debug("stl_sc26198panelinit(brdp=%p,panelp=%p)\n", brdp, panelp); - - BRDENABLE(panelp->brdnr, panelp->pagenr); - -/* - * Check that each chip is present and started up OK. - */ - chipmask = 0; - nrchips = (panelp->nrports + 4) / SC26198_PORTS; - if (brdp->brdtype == BRD_ECHPCI) - outb(panelp->pagenr, brdp->ioctrl); - - for (i = 0; i < nrchips; i++) { - ioaddr = panelp->iobase + (i * 4); - outb(SCCR, (ioaddr + XP_ADDR)); - outb(CR_RESETALL, (ioaddr + XP_DATA)); - outb(TSTR, (ioaddr + XP_ADDR)); - if (inb(ioaddr + XP_DATA) != 0) { - printk("STALLION: sc26198 not responding, " - "brd=%d panel=%d chip=%d\n", - panelp->brdnr, panelp->panelnr, i); - continue; - } - chipmask |= (0x1 << i); - outb(GCCR, (ioaddr + XP_ADDR)); - outb(GCCR_IVRTYPCHANACK, (ioaddr + XP_DATA)); - outb(WDTRCR, (ioaddr + XP_ADDR)); - outb(0xff, (ioaddr + XP_DATA)); - } - - BRDDISABLE(panelp->brdnr); - return chipmask; -} - -/*****************************************************************************/ - -/* - * Initialize hardware specific port registers. - */ - -static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp) -{ - pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp, - panelp, portp); - - if ((brdp == NULL) || (panelp == NULL) || - (portp == NULL)) - return; - - portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4); - portp->uartaddr = (portp->portnr & 0x07) << 4; - portp->pagenr = panelp->pagenr; - portp->hwid = 0x1; - - BRDENABLE(portp->brdnr, portp->pagenr); - stl_sc26198setreg(portp, IOPCR, IOPCR_SETSIGS); - BRDDISABLE(portp->brdnr); -} - -/*****************************************************************************/ - -/* - * Set up the sc26198 registers for a port based on the termios port - * settings. - */ - -static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp) -{ - struct stlbrd *brdp; - unsigned long flags; - unsigned int baudrate; - unsigned char mr0, mr1, mr2, clk; - unsigned char imron, imroff, iopr, ipr; - - mr0 = 0; - mr1 = 0; - mr2 = 0; - clk = 0; - iopr = 0; - imron = 0; - imroff = 0; - - brdp = stl_brds[portp->brdnr]; - if (brdp == NULL) - return; - -/* - * Set up the RX char ignore mask with those RX error types we - * can ignore. - */ - portp->rxignoremsk = 0; - if (tiosp->c_iflag & IGNPAR) - portp->rxignoremsk |= (SR_RXPARITY | SR_RXFRAMING | - SR_RXOVERRUN); - if (tiosp->c_iflag & IGNBRK) - portp->rxignoremsk |= SR_RXBREAK; - - portp->rxmarkmsk = SR_RXOVERRUN; - if (tiosp->c_iflag & (INPCK | PARMRK)) - portp->rxmarkmsk |= (SR_RXPARITY | SR_RXFRAMING); - if (tiosp->c_iflag & BRKINT) - portp->rxmarkmsk |= SR_RXBREAK; - -/* - * Go through the char size, parity and stop bits and set all the - * option register appropriately. - */ - switch (tiosp->c_cflag & CSIZE) { - case CS5: - mr1 |= MR1_CS5; - break; - case CS6: - mr1 |= MR1_CS6; - break; - case CS7: - mr1 |= MR1_CS7; - break; - default: - mr1 |= MR1_CS8; - break; - } - - if (tiosp->c_cflag & CSTOPB) - mr2 |= MR2_STOP2; - else - mr2 |= MR2_STOP1; - - if (tiosp->c_cflag & PARENB) { - if (tiosp->c_cflag & PARODD) - mr1 |= (MR1_PARENB | MR1_PARODD); - else - mr1 |= (MR1_PARENB | MR1_PAREVEN); - } else - mr1 |= MR1_PARNONE; - - mr1 |= MR1_ERRBLOCK; - -/* - * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing - * space for hardware flow control and the like. This should be set to - * VMIN. - */ - mr2 |= MR2_RXFIFOHALF; - -/* - * Calculate the baud rate timers. For now we will just assume that - * the input and output baud are the same. The sc26198 has a fixed - * baud rate table, so only discrete baud rates possible. - */ - baudrate = tiosp->c_cflag & CBAUD; - if (baudrate & CBAUDEX) { - baudrate &= ~CBAUDEX; - if ((baudrate < 1) || (baudrate > 4)) - tiosp->c_cflag &= ~CBAUDEX; - else - baudrate += 15; - } - baudrate = stl_baudrates[baudrate]; - if ((tiosp->c_cflag & CBAUD) == B38400) { - if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baudrate = 57600; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baudrate = 115200; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - baudrate = 230400; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - baudrate = 460800; - else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) - baudrate = (portp->baud_base / portp->custom_divisor); - } - if (baudrate > STL_SC26198MAXBAUD) - baudrate = STL_SC26198MAXBAUD; - - if (baudrate > 0) - for (clk = 0; clk < SC26198_NRBAUDS; clk++) - if (baudrate <= sc26198_baudtable[clk]) - break; - -/* - * Check what form of modem signaling is required and set it up. - */ - if (tiosp->c_cflag & CLOCAL) { - portp->port.flags &= ~ASYNC_CHECK_CD; - } else { - iopr |= IOPR_DCDCOS; - imron |= IR_IOPORT; - portp->port.flags |= ASYNC_CHECK_CD; - } - -/* - * Setup sc26198 enhanced modes if we can. In particular we want to - * handle as much of the flow control as possible automatically. As - * well as saving a few CPU cycles it will also greatly improve flow - * control reliability. - */ - if (tiosp->c_iflag & IXON) { - mr0 |= MR0_SWFTX | MR0_SWFT; - imron |= IR_XONXOFF; - } else - imroff |= IR_XONXOFF; - - if (tiosp->c_iflag & IXOFF) - mr0 |= MR0_SWFRX; - - if (tiosp->c_cflag & CRTSCTS) { - mr2 |= MR2_AUTOCTS; - mr1 |= MR1_AUTORTS; - } - -/* - * All sc26198 register values calculated so go through and set - * them all up. - */ - - pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", - portp->portnr, portp->panelnr, portp->brdnr); - pr_debug(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk); - pr_debug(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff); - pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n", - tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], - tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_sc26198setreg(portp, IMR, 0); - stl_sc26198updatereg(portp, MR0, mr0); - stl_sc26198updatereg(portp, MR1, mr1); - stl_sc26198setreg(portp, SCCR, CR_RXERRBLOCK); - stl_sc26198updatereg(portp, MR2, mr2); - stl_sc26198updatereg(portp, IOPIOR, - ((stl_sc26198getreg(portp, IOPIOR) & ~IPR_CHANGEMASK) | iopr)); - - if (baudrate > 0) { - stl_sc26198setreg(portp, TXCSR, clk); - stl_sc26198setreg(portp, RXCSR, clk); - } - - stl_sc26198setreg(portp, XONCR, tiosp->c_cc[VSTART]); - stl_sc26198setreg(portp, XOFFCR, tiosp->c_cc[VSTOP]); - - ipr = stl_sc26198getreg(portp, IPR); - if (ipr & IPR_DCD) - portp->sigs &= ~TIOCM_CD; - else - portp->sigs |= TIOCM_CD; - - portp->imr = (portp->imr & ~imroff) | imron; - stl_sc26198setreg(portp, IMR, portp->imr); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Set the state of the DTR and RTS signals. - */ - -static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts) -{ - unsigned char iopioron, iopioroff; - unsigned long flags; - - pr_debug("stl_sc26198setsignals(portp=%p,dtr=%d,rts=%d)\n", portp, - dtr, rts); - - iopioron = 0; - iopioroff = 0; - if (dtr == 0) - iopioroff |= IPR_DTR; - else if (dtr > 0) - iopioron |= IPR_DTR; - if (rts == 0) - iopioroff |= IPR_RTS; - else if (rts > 0) - iopioron |= IPR_RTS; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_sc26198setreg(portp, IOPIOR, - ((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron)); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Return the state of the signals. - */ - -static int stl_sc26198getsignals(struct stlport *portp) -{ - unsigned char ipr; - unsigned long flags; - int sigs; - - pr_debug("stl_sc26198getsignals(portp=%p)\n", portp); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - ipr = stl_sc26198getreg(portp, IPR); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); - - sigs = 0; - sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD; - sigs |= (ipr & IPR_CTS) ? 0 : TIOCM_CTS; - sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR; - sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS; - sigs |= TIOCM_DSR; - return sigs; -} - -/*****************************************************************************/ - -/* - * Enable/Disable the Transmitter and/or Receiver. - */ - -static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx) -{ - unsigned char ccr; - unsigned long flags; - - pr_debug("stl_sc26198enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx,tx); - - ccr = portp->crenable; - if (tx == 0) - ccr &= ~CR_TXENABLE; - else if (tx > 0) - ccr |= CR_TXENABLE; - if (rx == 0) - ccr &= ~CR_RXENABLE; - else if (rx > 0) - ccr |= CR_RXENABLE; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_sc26198setreg(portp, SCCR, ccr); - BRDDISABLE(portp->brdnr); - portp->crenable = ccr; - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Start/stop the Transmitter and/or Receiver. - */ - -static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx) -{ - unsigned char imr; - unsigned long flags; - - pr_debug("stl_sc26198startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); - - imr = portp->imr; - if (tx == 0) - imr &= ~IR_TXRDY; - else if (tx == 1) - imr |= IR_TXRDY; - if (rx == 0) - imr &= ~(IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG); - else if (rx > 0) - imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_sc26198setreg(portp, IMR, imr); - BRDDISABLE(portp->brdnr); - portp->imr = imr; - if (tx > 0) - set_bit(ASYI_TXBUSY, &portp->istate); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Disable all interrupts from this port. - */ - -static void stl_sc26198disableintrs(struct stlport *portp) -{ - unsigned long flags; - - pr_debug("stl_sc26198disableintrs(portp=%p)\n", portp); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - portp->imr = 0; - stl_sc26198setreg(portp, IMR, 0); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -static void stl_sc26198sendbreak(struct stlport *portp, int len) -{ - unsigned long flags; - - pr_debug("stl_sc26198sendbreak(portp=%p,len=%d)\n", portp, len); - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - if (len == 1) { - stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK); - portp->stats.txbreaks++; - } else - stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK); - - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Take flow control actions... - */ - -static void stl_sc26198flowctrl(struct stlport *portp, int state) -{ - struct tty_struct *tty; - unsigned long flags; - unsigned char mr0; - - pr_debug("stl_sc26198flowctrl(portp=%p,state=%x)\n", portp, state); - - if (portp == NULL) - return; - tty = tty_port_tty_get(&portp->port); - if (tty == NULL) - return; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - - if (state) { - if (tty->termios->c_iflag & IXOFF) { - mr0 = stl_sc26198getreg(portp, MR0); - stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); - stl_sc26198setreg(portp, SCCR, CR_TXSENDXON); - mr0 |= MR0_SWFRX; - portp->stats.rxxon++; - stl_sc26198wait(portp); - stl_sc26198setreg(portp, MR0, mr0); - } -/* - * Question: should we return RTS to what it was before? It may - * have been set by an ioctl... Suppose not, since if you have - * hardware flow control set then it is pretty silly to go and - * set the RTS line by hand. - */ - if (tty->termios->c_cflag & CRTSCTS) { - stl_sc26198setreg(portp, MR1, - (stl_sc26198getreg(portp, MR1) | MR1_AUTORTS)); - stl_sc26198setreg(portp, IOPIOR, - (stl_sc26198getreg(portp, IOPIOR) | IOPR_RTS)); - portp->stats.rxrtson++; - } - } else { - if (tty->termios->c_iflag & IXOFF) { - mr0 = stl_sc26198getreg(portp, MR0); - stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); - stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF); - mr0 &= ~MR0_SWFRX; - portp->stats.rxxoff++; - stl_sc26198wait(portp); - stl_sc26198setreg(portp, MR0, mr0); - } - if (tty->termios->c_cflag & CRTSCTS) { - stl_sc26198setreg(portp, MR1, - (stl_sc26198getreg(portp, MR1) & ~MR1_AUTORTS)); - stl_sc26198setreg(portp, IOPIOR, - (stl_sc26198getreg(portp, IOPIOR) & ~IOPR_RTS)); - portp->stats.rxrtsoff++; - } - } - - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); - tty_kref_put(tty); -} - -/*****************************************************************************/ - -/* - * Send a flow control character. - */ - -static void stl_sc26198sendflow(struct stlport *portp, int state) -{ - struct tty_struct *tty; - unsigned long flags; - unsigned char mr0; - - pr_debug("stl_sc26198sendflow(portp=%p,state=%x)\n", portp, state); - - if (portp == NULL) - return; - tty = tty_port_tty_get(&portp->port); - if (tty == NULL) - return; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - if (state) { - mr0 = stl_sc26198getreg(portp, MR0); - stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); - stl_sc26198setreg(portp, SCCR, CR_TXSENDXON); - mr0 |= MR0_SWFRX; - portp->stats.rxxon++; - stl_sc26198wait(portp); - stl_sc26198setreg(portp, MR0, mr0); - } else { - mr0 = stl_sc26198getreg(portp, MR0); - stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); - stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF); - mr0 &= ~MR0_SWFRX; - portp->stats.rxxoff++; - stl_sc26198wait(portp); - stl_sc26198setreg(portp, MR0, mr0); - } - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); - tty_kref_put(tty); -} - -/*****************************************************************************/ - -static void stl_sc26198flush(struct stlport *portp) -{ - unsigned long flags; - - pr_debug("stl_sc26198flush(portp=%p)\n", portp); - - if (portp == NULL) - return; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - stl_sc26198setreg(portp, SCCR, CR_TXRESET); - stl_sc26198setreg(portp, SCCR, portp->crenable); - BRDDISABLE(portp->brdnr); - portp->tx.tail = portp->tx.head; - spin_unlock_irqrestore(&brd_lock, flags); -} - -/*****************************************************************************/ - -/* - * Return the current state of data flow on this port. This is only - * really interesting when determining if data has fully completed - * transmission or not... The sc26198 interrupt scheme cannot - * determine when all data has actually drained, so we need to - * check the port statusy register to be sure. - */ - -static int stl_sc26198datastate(struct stlport *portp) -{ - unsigned long flags; - unsigned char sr; - - pr_debug("stl_sc26198datastate(portp=%p)\n", portp); - - if (portp == NULL) - return 0; - if (test_bit(ASYI_TXBUSY, &portp->istate)) - return 1; - - spin_lock_irqsave(&brd_lock, flags); - BRDENABLE(portp->brdnr, portp->pagenr); - sr = stl_sc26198getreg(portp, SR); - BRDDISABLE(portp->brdnr); - spin_unlock_irqrestore(&brd_lock, flags); - - return (sr & SR_TXEMPTY) ? 0 : 1; -} - -/*****************************************************************************/ - -/* - * Delay for a small amount of time, to give the sc26198 a chance - * to process a command... - */ - -static void stl_sc26198wait(struct stlport *portp) -{ - int i; - - pr_debug("stl_sc26198wait(portp=%p)\n", portp); - - if (portp == NULL) - return; - - for (i = 0; i < 20; i++) - stl_sc26198getglobreg(portp, TSTR); -} - -/*****************************************************************************/ - -/* - * If we are TX flow controlled and in IXANY mode then we may - * need to unflow control here. We gotta do this because of the - * automatic flow control modes of the sc26198. - */ - -static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty) -{ - unsigned char mr0; - - mr0 = stl_sc26198getreg(portp, MR0); - stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); - stl_sc26198setreg(portp, SCCR, CR_HOSTXON); - stl_sc26198wait(portp); - stl_sc26198setreg(portp, MR0, mr0); - clear_bit(ASYI_TXFLOWED, &portp->istate); -} - -/*****************************************************************************/ - -/* - * Interrupt service routine for sc26198 panels. - */ - -static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase) -{ - struct stlport *portp; - unsigned int iack; - - spin_lock(&brd_lock); - -/* - * Work around bug in sc26198 chip... Cannot have A6 address - * line of UART high, else iack will be returned as 0. - */ - outb(0, (iobase + 1)); - - iack = inb(iobase + XP_IACK); - portp = panelp->ports[(iack & IVR_CHANMASK) + ((iobase & 0x4) << 1)]; - - if (iack & IVR_RXDATA) - stl_sc26198rxisr(portp, iack); - else if (iack & IVR_TXDATA) - stl_sc26198txisr(portp); - else - stl_sc26198otherisr(portp, iack); - - spin_unlock(&brd_lock); -} - -/*****************************************************************************/ - -/* - * Transmit interrupt handler. This has gotta be fast! Handling TX - * chars is pretty simple, stuff as many as possible from the TX buffer - * into the sc26198 FIFO. - * In practice it is possible that interrupts are enabled but that the - * port has been hung up. Need to handle not having any TX buffer here, - * this is done by using the side effect that head and tail will also - * be NULL if the buffer has been freed. - */ - -static void stl_sc26198txisr(struct stlport *portp) -{ - struct tty_struct *tty; - unsigned int ioaddr; - unsigned char mr0; - int len, stlen; - char *head, *tail; - - pr_debug("stl_sc26198txisr(portp=%p)\n", portp); - - ioaddr = portp->ioaddr; - head = portp->tx.head; - tail = portp->tx.tail; - len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); - if ((len == 0) || ((len < STL_TXBUFLOW) && - (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { - set_bit(ASYI_TXLOW, &portp->istate); - tty = tty_port_tty_get(&portp->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } - } - - if (len == 0) { - outb((MR0 | portp->uartaddr), (ioaddr + XP_ADDR)); - mr0 = inb(ioaddr + XP_DATA); - if ((mr0 & MR0_TXMASK) == MR0_TXEMPTY) { - portp->imr &= ~IR_TXRDY; - outb((IMR | portp->uartaddr), (ioaddr + XP_ADDR)); - outb(portp->imr, (ioaddr + XP_DATA)); - clear_bit(ASYI_TXBUSY, &portp->istate); - } else { - mr0 |= ((mr0 & ~MR0_TXMASK) | MR0_TXEMPTY); - outb(mr0, (ioaddr + XP_DATA)); - } - } else { - len = min(len, SC26198_TXFIFOSIZE); - portp->stats.txtotal += len; - stlen = min_t(unsigned int, len, - (portp->tx.buf + STL_TXBUFSIZE) - tail); - outb(GTXFIFO, (ioaddr + XP_ADDR)); - outsb((ioaddr + XP_DATA), tail, stlen); - len -= stlen; - tail += stlen; - if (tail >= (portp->tx.buf + STL_TXBUFSIZE)) - tail = portp->tx.buf; - if (len > 0) { - outsb((ioaddr + XP_DATA), tail, len); - tail += len; - } - portp->tx.tail = tail; - } -} - -/*****************************************************************************/ - -/* - * Receive character interrupt handler. Determine if we have good chars - * or bad chars and then process appropriately. Good chars are easy - * just shove the lot into the RX buffer and set all status byte to 0. - * If a bad RX char then process as required. This routine needs to be - * fast! In practice it is possible that we get an interrupt on a port - * that is closed. This can happen on hangups - since they completely - * shutdown a port not in user context. Need to handle this case. - */ - -static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack) -{ - struct tty_struct *tty; - unsigned int len, buflen, ioaddr; - - pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack); - - tty = tty_port_tty_get(&portp->port); - ioaddr = portp->ioaddr; - outb(GIBCR, (ioaddr + XP_ADDR)); - len = inb(ioaddr + XP_DATA) + 1; - - if ((iack & IVR_TYPEMASK) == IVR_RXDATA) { - if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { - len = min_t(unsigned int, len, sizeof(stl_unwanted)); - outb(GRXFIFO, (ioaddr + XP_ADDR)); - insb((ioaddr + XP_DATA), &stl_unwanted[0], len); - portp->stats.rxlost += len; - portp->stats.rxtotal += len; - } else { - len = min(len, buflen); - if (len > 0) { - unsigned char *ptr; - outb(GRXFIFO, (ioaddr + XP_ADDR)); - tty_prepare_flip_string(tty, &ptr, len); - insb((ioaddr + XP_DATA), ptr, len); - tty_schedule_flip(tty); - portp->stats.rxtotal += len; - } - } - } else { - stl_sc26198rxbadchars(portp); - } - -/* - * If we are TX flow controlled and in IXANY mode then we may need - * to unflow control here. We gotta do this because of the automatic - * flow control modes of the sc26198. - */ - if (test_bit(ASYI_TXFLOWED, &portp->istate)) { - if ((tty != NULL) && - (tty->termios != NULL) && - (tty->termios->c_iflag & IXANY)) { - stl_sc26198txunflow(portp, tty); - } - } - tty_kref_put(tty); -} - -/*****************************************************************************/ - -/* - * Process an RX bad character. - */ - -static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch) -{ - struct tty_struct *tty; - unsigned int ioaddr; - - tty = tty_port_tty_get(&portp->port); - ioaddr = portp->ioaddr; - - if (status & SR_RXPARITY) - portp->stats.rxparity++; - if (status & SR_RXFRAMING) - portp->stats.rxframing++; - if (status & SR_RXOVERRUN) - portp->stats.rxoverrun++; - if (status & SR_RXBREAK) - portp->stats.rxbreaks++; - - if ((tty != NULL) && - ((portp->rxignoremsk & status) == 0)) { - if (portp->rxmarkmsk & status) { - if (status & SR_RXBREAK) { - status = TTY_BREAK; - if (portp->port.flags & ASYNC_SAK) { - do_SAK(tty); - BRDENABLE(portp->brdnr, portp->pagenr); - } - } else if (status & SR_RXPARITY) - status = TTY_PARITY; - else if (status & SR_RXFRAMING) - status = TTY_FRAME; - else if(status & SR_RXOVERRUN) - status = TTY_OVERRUN; - else - status = 0; - } else - status = 0; - - tty_insert_flip_char(tty, ch, status); - tty_schedule_flip(tty); - - if (status == 0) - portp->stats.rxtotal++; - } - tty_kref_put(tty); -} - -/*****************************************************************************/ - -/* - * Process all characters in the RX FIFO of the UART. Check all char - * status bytes as well, and process as required. We need to check - * all bytes in the FIFO, in case some more enter the FIFO while we - * are here. To get the exact character error type we need to switch - * into CHAR error mode (that is why we need to make sure we empty - * the FIFO). - */ - -static void stl_sc26198rxbadchars(struct stlport *portp) -{ - unsigned char status, mr1; - char ch; - -/* - * To get the precise error type for each character we must switch - * back into CHAR error mode. - */ - mr1 = stl_sc26198getreg(portp, MR1); - stl_sc26198setreg(portp, MR1, (mr1 & ~MR1_ERRBLOCK)); - - while ((status = stl_sc26198getreg(portp, SR)) & SR_RXRDY) { - stl_sc26198setreg(portp, SCCR, CR_CLEARRXERR); - ch = stl_sc26198getreg(portp, RXFIFO); - stl_sc26198rxbadch(portp, status, ch); - } - -/* - * To get correct interrupt class we must switch back into BLOCK - * error mode. - */ - stl_sc26198setreg(portp, MR1, mr1); -} - -/*****************************************************************************/ - -/* - * Other interrupt handler. This includes modem signals, flow - * control actions, etc. Most stuff is left to off-level interrupt - * processing time. - */ - -static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack) -{ - unsigned char cir, ipr, xisr; - - pr_debug("stl_sc26198otherisr(portp=%p,iack=%x)\n", portp, iack); - - cir = stl_sc26198getglobreg(portp, CIR); - - switch (cir & CIR_SUBTYPEMASK) { - case CIR_SUBCOS: - ipr = stl_sc26198getreg(portp, IPR); - if (ipr & IPR_DCDCHANGE) { - stl_cd_change(portp); - portp->stats.modem++; - } - break; - case CIR_SUBXONXOFF: - xisr = stl_sc26198getreg(portp, XISR); - if (xisr & XISR_RXXONGOT) { - set_bit(ASYI_TXFLOWED, &portp->istate); - portp->stats.txxoff++; - } - if (xisr & XISR_RXXOFFGOT) { - clear_bit(ASYI_TXFLOWED, &portp->istate); - portp->stats.txxon++; - } - break; - case CIR_SUBBREAK: - stl_sc26198setreg(portp, SCCR, CR_BREAKRESET); - stl_sc26198rxbadchars(portp); - break; - default: - break; - } -} - -static void stl_free_isabrds(void) -{ - struct stlbrd *brdp; - unsigned int i; - - for (i = 0; i < stl_nrbrds; i++) { - if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED)) - continue; - - free_irq(brdp->irq, brdp); - - stl_cleanup_panels(brdp); - - release_region(brdp->ioaddr1, brdp->iosize1); - if (brdp->iosize2 > 0) - release_region(brdp->ioaddr2, brdp->iosize2); - - kfree(brdp); - stl_brds[i] = NULL; - } -} - -/* - * Loadable module initialization stuff. - */ -static int __init stallion_module_init(void) -{ - struct stlbrd *brdp; - struct stlconf conf; - unsigned int i, j; - int retval; - - printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion); - - spin_lock_init(&stallion_lock); - spin_lock_init(&brd_lock); - - stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); - if (!stl_serial) { - retval = -ENOMEM; - goto err; - } - - stl_serial->owner = THIS_MODULE; - stl_serial->driver_name = stl_drvname; - stl_serial->name = "ttyE"; - stl_serial->major = STL_SERIALMAJOR; - stl_serial->minor_start = 0; - stl_serial->type = TTY_DRIVER_TYPE_SERIAL; - stl_serial->subtype = SERIAL_TYPE_NORMAL; - stl_serial->init_termios = stl_deftermios; - stl_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(stl_serial, &stl_ops); - - retval = tty_register_driver(stl_serial); - if (retval) { - printk("STALLION: failed to register serial driver\n"); - goto err_frtty; - } - -/* - * Find any dynamically supported boards. That is via module load - * line options. - */ - for (i = stl_nrbrds; i < stl_nargs; i++) { - memset(&conf, 0, sizeof(conf)); - if (stl_parsebrd(&conf, stl_brdsp[i]) == 0) - continue; - if ((brdp = stl_allocbrd()) == NULL) - continue; - brdp->brdnr = i; - brdp->brdtype = conf.brdtype; - brdp->ioaddr1 = conf.ioaddr1; - brdp->ioaddr2 = conf.ioaddr2; - brdp->irq = conf.irq; - brdp->irqtype = conf.irqtype; - stl_brds[brdp->brdnr] = brdp; - if (stl_brdinit(brdp)) { - stl_brds[brdp->brdnr] = NULL; - kfree(brdp); - } else { - for (j = 0; j < brdp->nrports; j++) - tty_register_device(stl_serial, - brdp->brdnr * STL_MAXPORTS + j, NULL); - stl_nrbrds = i + 1; - } - } - - /* this has to be _after_ isa finding because of locking */ - retval = pci_register_driver(&stl_pcidriver); - if (retval && stl_nrbrds == 0) { - printk(KERN_ERR "STALLION: can't register pci driver\n"); - goto err_unrtty; - } - -/* - * Set up a character driver for per board stuff. This is mainly used - * to do stats ioctls on the ports. - */ - if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem)) - printk("STALLION: failed to register serial board device\n"); - - stallion_class = class_create(THIS_MODULE, "staliomem"); - if (IS_ERR(stallion_class)) - printk("STALLION: failed to create class\n"); - for (i = 0; i < 4; i++) - device_create(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i), - NULL, "staliomem%d", i); - - return 0; -err_unrtty: - tty_unregister_driver(stl_serial); -err_frtty: - put_tty_driver(stl_serial); -err: - return retval; -} - -static void __exit stallion_module_exit(void) -{ - struct stlbrd *brdp; - unsigned int i, j; - - pr_debug("cleanup_module()\n"); - - printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle, - stl_drvversion); - -/* - * Free up all allocated resources used by the ports. This includes - * memory and interrupts. As part of this process we will also do - * a hangup on every open port - to try to flush out any processes - * hanging onto ports. - */ - for (i = 0; i < stl_nrbrds; i++) { - if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED)) - continue; - for (j = 0; j < brdp->nrports; j++) - tty_unregister_device(stl_serial, - brdp->brdnr * STL_MAXPORTS + j); - } - - for (i = 0; i < 4; i++) - device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i)); - unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"); - class_destroy(stallion_class); - - pci_unregister_driver(&stl_pcidriver); - - stl_free_isabrds(); - - tty_unregister_driver(stl_serial); - put_tty_driver(stl_serial); -} - -module_init(stallion_module_init); -module_exit(stallion_module_exit); - -MODULE_AUTHOR("Greg Ungerer"); -MODULE_DESCRIPTION("Stallion Multiport Serial Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 5c8fcfc42c3e..fb1fc4e5a8cb 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -41,6 +41,8 @@ config STAGING_EXCLUDE_BUILD if !STAGING_EXCLUDE_BUILD +source "drivers/staging/tty/Kconfig" + source "drivers/staging/et131x/Kconfig" source "drivers/staging/slicoss/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index d53886317826..f498e345a01d 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -3,6 +3,7 @@ # fix for build system bug... obj-$(CONFIG_STAGING) += staging.o +obj-y += tty/ obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_VIDEO_GO7007) += go7007/ diff --git a/drivers/staging/tty/Kconfig b/drivers/staging/tty/Kconfig new file mode 100644 index 000000000000..77103a07abbd --- /dev/null +++ b/drivers/staging/tty/Kconfig @@ -0,0 +1,87 @@ +config STALLION + tristate "Stallion EasyIO or EC8/32 support" + depends on STALDRV && (ISA || EISA || PCI) + help + If you have an EasyIO or EasyConnection 8/32 multiport Stallion + card, then this is for you; say Y. Make sure to read + . + + To compile this driver as a module, choose M here: the + module will be called stallion. + +config ISTALLION + tristate "Stallion EC8/64, ONboard, Brumby support" + depends on STALDRV && (ISA || EISA || PCI) + help + If you have an EasyConnection 8/64, ONboard, Brumby or Stallion + serial multiport card, say Y here. Make sure to read + . + + To compile this driver as a module, choose M here: the + module will be called istallion. + +config DIGIEPCA + tristate "Digiboard Intelligent Async Support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + ---help--- + This is a driver for Digi International's Xx, Xeve, and Xem series + of cards which provide multiple serial ports. You would need + something like this to connect more than two modems to your Linux + box, for instance in order to become a dial-in server. This driver + supports the original PC (ISA) boards as well as PCI, and EISA. If + you have a card like this, say Y here and read the file + . + + To compile this driver as a module, choose M here: the + module will be called epca. + +config RISCOM8 + tristate "SDL RISCom/8 card support" + depends on SERIAL_NONSTANDARD + help + This is a driver for the SDL Communications RISCom/8 multiport card, + which gives you many serial ports. You would need something like + this to connect more than two modems to your Linux box, for instance + in order to become a dial-in server. If you have a card like that, + say Y here and read the file . + + Also it's possible to say M here and compile this driver as kernel + loadable module; the module will be called riscom8. + +config SPECIALIX + tristate "Specialix IO8+ card support" + depends on SERIAL_NONSTANDARD + help + This is a driver for the Specialix IO8+ multiport card (both the + ISA and the PCI version) which gives you many serial ports. You + would need something like this to connect more than two modems to + your Linux box, for instance in order to become a dial-in server. + + If you have a card like that, say Y here and read the file + . Also it's possible to say + M here and compile this driver as kernel loadable module which will be + called specialix. + +config COMPUTONE + tristate "Computone IntelliPort Plus serial support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + ---help--- + This driver supports the entire family of Intelliport II/Plus + controllers with the exception of the MicroChannel controllers and + products previous to the Intelliport II. These are multiport cards, + which give you many serial ports. You would need something like this + to connect more than two modems to your Linux box, for instance in + order to become a dial-in server. If you have a card like that, say + Y here and read . + + To compile this driver as module, choose M here: the + module will be called ip2. + +config SERIAL167 + bool "CD2401 support for MVME166/7 serial ports" + depends on MVME16x + help + This is the driver for the serial ports on the Motorola MVME166, + 167, and 172 boards. Everyone using one of these boards should say + Y here. + diff --git a/drivers/staging/tty/Makefile b/drivers/staging/tty/Makefile new file mode 100644 index 000000000000..ac57c105611b --- /dev/null +++ b/drivers/staging/tty/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_STALLION) += stallion.o +obj-$(CONFIG_ISTALLION) += istallion.o +obj-$(CONFIG_DIGIEPCA) += epca.o +obj-$(CONFIG_SERIAL167) += serial167.o +obj-$(CONFIG_SPECIALIX) += specialix.o +obj-$(CONFIG_RISCOM8) += riscom8.o +obj-$(CONFIG_COMPUTONE) += ip2/ diff --git a/drivers/staging/tty/TODO b/drivers/staging/tty/TODO new file mode 100644 index 000000000000..88756453ac6c --- /dev/null +++ b/drivers/staging/tty/TODO @@ -0,0 +1,6 @@ +These are a few tty/serial drivers that either do not build, +or work if they do build, or if they seem to work, are for obsolete +hardware, or are full of unfixable races and no one uses them anymore. + +If no one steps up to adopt any of these drivers, they will be removed +in the 2.6.41 release. diff --git a/drivers/staging/tty/epca.c b/drivers/staging/tty/epca.c new file mode 100644 index 000000000000..7ad3638967ae --- /dev/null +++ b/drivers/staging/tty/epca.c @@ -0,0 +1,2784 @@ +/* + Copyright (C) 1996 Digi International. + + For technical support please email digiLinux@dgii.com or + call Digi tech support at (612) 912-3456 + + ** This driver is no longer supported by Digi ** + + Much of this design and code came from epca.c which was + copyright (C) 1994, 1995 Troy De Jongh, and subsquently + modified by David Nugent, Christoph Lameter, Mike McLagan. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ +/* See README.epca for change history --DAT*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "digiPCI.h" + + +#include "digi1.h" +#include "digiFep1.h" +#include "epca.h" +#include "epcaconfig.h" + +#define VERSION "1.3.0.1-LK2.6" + +/* This major needs to be submitted to Linux to join the majors list */ +#define DIGIINFOMAJOR 35 /* For Digi specific ioctl */ + + +#define MAXCARDS 7 +#define epcaassert(x, msg) if (!(x)) epca_error(__LINE__, msg) + +#define PFX "epca: " + +static int nbdevs, num_cards, liloconfig; +static int digi_poller_inhibited = 1 ; + +static int setup_error_code; +static int invalid_lilo_config; + +/* + * The ISA boards do window flipping into the same spaces so its only sane with + * a single lock. It's still pretty efficient. This lock guards the hardware + * and the tty_port lock guards the kernel side stuff like use counts. Take + * this lock inside the port lock if you must take both. + */ +static DEFINE_SPINLOCK(epca_lock); + +/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted + to 7 below. */ +static struct board_info boards[MAXBOARDS]; + +static struct tty_driver *pc_driver; +static struct tty_driver *pc_info; + +/* ------------------ Begin Digi specific structures -------------------- */ + +/* + * digi_channels represents an array of structures that keep track of each + * channel of the Digi product. Information such as transmit and receive + * pointers, termio data, and signal definitions (DTR, CTS, etc ...) are stored + * here. This structure is NOT used to overlay the cards physical channel + * structure. + */ +static struct channel digi_channels[MAX_ALLOC]; + +/* + * card_ptr is an array used to hold the address of the first channel structure + * of each card. This array will hold the addresses of various channels located + * in digi_channels. + */ +static struct channel *card_ptr[MAXCARDS]; + +static struct timer_list epca_timer; + +/* + * Begin generic memory functions. These functions will be alias (point at) + * more specific functions dependent on the board being configured. + */ +static void memwinon(struct board_info *b, unsigned int win); +static void memwinoff(struct board_info *b, unsigned int win); +static void globalwinon(struct channel *ch); +static void rxwinon(struct channel *ch); +static void txwinon(struct channel *ch); +static void memoff(struct channel *ch); +static void assertgwinon(struct channel *ch); +static void assertmemoff(struct channel *ch); + +/* ---- Begin more 'specific' memory functions for cx_like products --- */ + +static void pcxem_memwinon(struct board_info *b, unsigned int win); +static void pcxem_memwinoff(struct board_info *b, unsigned int win); +static void pcxem_globalwinon(struct channel *ch); +static void pcxem_rxwinon(struct channel *ch); +static void pcxem_txwinon(struct channel *ch); +static void pcxem_memoff(struct channel *ch); + +/* ------ Begin more 'specific' memory functions for the pcxe ------- */ + +static void pcxe_memwinon(struct board_info *b, unsigned int win); +static void pcxe_memwinoff(struct board_info *b, unsigned int win); +static void pcxe_globalwinon(struct channel *ch); +static void pcxe_rxwinon(struct channel *ch); +static void pcxe_txwinon(struct channel *ch); +static void pcxe_memoff(struct channel *ch); + +/* ---- Begin more 'specific' memory functions for the pc64xe and pcxi ---- */ +/* Note : pc64xe and pcxi share the same windowing routines */ + +static void pcxi_memwinon(struct board_info *b, unsigned int win); +static void pcxi_memwinoff(struct board_info *b, unsigned int win); +static void pcxi_globalwinon(struct channel *ch); +static void pcxi_rxwinon(struct channel *ch); +static void pcxi_txwinon(struct channel *ch); +static void pcxi_memoff(struct channel *ch); + +/* - Begin 'specific' do nothing memory functions needed for some cards - */ + +static void dummy_memwinon(struct board_info *b, unsigned int win); +static void dummy_memwinoff(struct board_info *b, unsigned int win); +static void dummy_globalwinon(struct channel *ch); +static void dummy_rxwinon(struct channel *ch); +static void dummy_txwinon(struct channel *ch); +static void dummy_memoff(struct channel *ch); +static void dummy_assertgwinon(struct channel *ch); +static void dummy_assertmemoff(struct channel *ch); + +static struct channel *verifyChannel(struct tty_struct *); +static void pc_sched_event(struct channel *, int); +static void epca_error(int, char *); +static void pc_close(struct tty_struct *, struct file *); +static void shutdown(struct channel *, struct tty_struct *tty); +static void pc_hangup(struct tty_struct *); +static int pc_write_room(struct tty_struct *); +static int pc_chars_in_buffer(struct tty_struct *); +static void pc_flush_buffer(struct tty_struct *); +static void pc_flush_chars(struct tty_struct *); +static int pc_open(struct tty_struct *, struct file *); +static void post_fep_init(unsigned int crd); +static void epcapoll(unsigned long); +static void doevent(int); +static void fepcmd(struct channel *, int, int, int, int, int); +static unsigned termios2digi_h(struct channel *ch, unsigned); +static unsigned termios2digi_i(struct channel *ch, unsigned); +static unsigned termios2digi_c(struct channel *ch, unsigned); +static void epcaparam(struct tty_struct *, struct channel *); +static void receive_data(struct channel *, struct tty_struct *tty); +static int pc_ioctl(struct tty_struct *, + unsigned int, unsigned long); +static int info_ioctl(struct tty_struct *, + unsigned int, unsigned long); +static void pc_set_termios(struct tty_struct *, struct ktermios *); +static void do_softint(struct work_struct *work); +static void pc_stop(struct tty_struct *); +static void pc_start(struct tty_struct *); +static void pc_throttle(struct tty_struct *tty); +static void pc_unthrottle(struct tty_struct *tty); +static int pc_send_break(struct tty_struct *tty, int msec); +static void setup_empty_event(struct tty_struct *tty, struct channel *ch); + +static int pc_write(struct tty_struct *, const unsigned char *, int); +static int pc_init(void); +static int init_PCI(void); + +/* + * Table of functions for each board to handle memory. Mantaining parallelism + * is a *very* good idea here. The idea is for the runtime code to blindly call + * these functions, not knowing/caring about the underlying hardware. This + * stuff should contain no conditionals; if more functionality is needed a + * different entry should be established. These calls are the interface calls + * and are the only functions that should be accessed. Anyone caught making + * direct calls deserves what they get. + */ +static void memwinon(struct board_info *b, unsigned int win) +{ + b->memwinon(b, win); +} + +static void memwinoff(struct board_info *b, unsigned int win) +{ + b->memwinoff(b, win); +} + +static void globalwinon(struct channel *ch) +{ + ch->board->globalwinon(ch); +} + +static void rxwinon(struct channel *ch) +{ + ch->board->rxwinon(ch); +} + +static void txwinon(struct channel *ch) +{ + ch->board->txwinon(ch); +} + +static void memoff(struct channel *ch) +{ + ch->board->memoff(ch); +} +static void assertgwinon(struct channel *ch) +{ + ch->board->assertgwinon(ch); +} + +static void assertmemoff(struct channel *ch) +{ + ch->board->assertmemoff(ch); +} + +/* PCXEM windowing is the same as that used in the PCXR and CX series cards. */ +static void pcxem_memwinon(struct board_info *b, unsigned int win) +{ + outb_p(FEPWIN | win, b->port + 1); +} + +static void pcxem_memwinoff(struct board_info *b, unsigned int win) +{ + outb_p(0, b->port + 1); +} + +static void pcxem_globalwinon(struct channel *ch) +{ + outb_p(FEPWIN, (int)ch->board->port + 1); +} + +static void pcxem_rxwinon(struct channel *ch) +{ + outb_p(ch->rxwin, (int)ch->board->port + 1); +} + +static void pcxem_txwinon(struct channel *ch) +{ + outb_p(ch->txwin, (int)ch->board->port + 1); +} + +static void pcxem_memoff(struct channel *ch) +{ + outb_p(0, (int)ch->board->port + 1); +} + +/* ----------------- Begin pcxe memory window stuff ------------------ */ +static void pcxe_memwinon(struct board_info *b, unsigned int win) +{ + outb_p(FEPWIN | win, b->port + 1); +} + +static void pcxe_memwinoff(struct board_info *b, unsigned int win) +{ + outb_p(inb(b->port) & ~FEPMEM, b->port + 1); + outb_p(0, b->port + 1); +} + +static void pcxe_globalwinon(struct channel *ch) +{ + outb_p(FEPWIN, (int)ch->board->port + 1); +} + +static void pcxe_rxwinon(struct channel *ch) +{ + outb_p(ch->rxwin, (int)ch->board->port + 1); +} + +static void pcxe_txwinon(struct channel *ch) +{ + outb_p(ch->txwin, (int)ch->board->port + 1); +} + +static void pcxe_memoff(struct channel *ch) +{ + outb_p(0, (int)ch->board->port); + outb_p(0, (int)ch->board->port + 1); +} + +/* ------------- Begin pc64xe and pcxi memory window stuff -------------- */ +static void pcxi_memwinon(struct board_info *b, unsigned int win) +{ + outb_p(inb(b->port) | FEPMEM, b->port); +} + +static void pcxi_memwinoff(struct board_info *b, unsigned int win) +{ + outb_p(inb(b->port) & ~FEPMEM, b->port); +} + +static void pcxi_globalwinon(struct channel *ch) +{ + outb_p(FEPMEM, ch->board->port); +} + +static void pcxi_rxwinon(struct channel *ch) +{ + outb_p(FEPMEM, ch->board->port); +} + +static void pcxi_txwinon(struct channel *ch) +{ + outb_p(FEPMEM, ch->board->port); +} + +static void pcxi_memoff(struct channel *ch) +{ + outb_p(0, ch->board->port); +} + +static void pcxi_assertgwinon(struct channel *ch) +{ + epcaassert(inb(ch->board->port) & FEPMEM, "Global memory off"); +} + +static void pcxi_assertmemoff(struct channel *ch) +{ + epcaassert(!(inb(ch->board->port) & FEPMEM), "Memory on"); +} + +/* + * Not all of the cards need specific memory windowing routines. Some cards + * (Such as PCI) needs no windowing routines at all. We provide these do + * nothing routines so that the same code base can be used. The driver will + * ALWAYS call a windowing routine if it thinks it needs to; regardless of the + * card. However, dependent on the card the routine may or may not do anything. + */ +static void dummy_memwinon(struct board_info *b, unsigned int win) +{ +} + +static void dummy_memwinoff(struct board_info *b, unsigned int win) +{ +} + +static void dummy_globalwinon(struct channel *ch) +{ +} + +static void dummy_rxwinon(struct channel *ch) +{ +} + +static void dummy_txwinon(struct channel *ch) +{ +} + +static void dummy_memoff(struct channel *ch) +{ +} + +static void dummy_assertgwinon(struct channel *ch) +{ +} + +static void dummy_assertmemoff(struct channel *ch) +{ +} + +static struct channel *verifyChannel(struct tty_struct *tty) +{ + /* + * This routine basically provides a sanity check. It insures that the + * channel returned is within the proper range of addresses as well as + * properly initialized. If some bogus info gets passed in + * through tty->driver_data this should catch it. + */ + if (tty) { + struct channel *ch = tty->driver_data; + if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) { + if (ch->magic == EPCA_MAGIC) + return ch; + } + } + return NULL; +} + +static void pc_sched_event(struct channel *ch, int event) +{ + /* + * We call this to schedule interrupt processing on some event. The + * kernel sees our request and calls the related routine in OUR driver. + */ + ch->event |= 1 << event; + schedule_work(&ch->tqueue); +} + +static void epca_error(int line, char *msg) +{ + printk(KERN_ERR "epca_error (Digi): line = %d %s\n", line, msg); +} + +static void pc_close(struct tty_struct *tty, struct file *filp) +{ + struct channel *ch; + struct tty_port *port; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch == NULL) + return; + port = &ch->port; + + if (tty_port_close_start(port, tty, filp) == 0) + return; + + pc_flush_buffer(tty); + shutdown(ch, tty); + + tty_port_close_end(port, tty); + ch->event = 0; /* FIXME: review ch->event locking */ + tty_port_tty_set(port, NULL); +} + +static void shutdown(struct channel *ch, struct tty_struct *tty) +{ + unsigned long flags; + struct board_chan __iomem *bc; + struct tty_port *port = &ch->port; + + if (!(port->flags & ASYNC_INITIALIZED)) + return; + + spin_lock_irqsave(&epca_lock, flags); + + globalwinon(ch); + bc = ch->brdchan; + + /* + * In order for an event to be generated on the receipt of data the + * idata flag must be set. Since we are shutting down, this is not + * necessary clear this flag. + */ + if (bc) + writeb(0, &bc->idata); + + /* If we're a modem control device and HUPCL is on, drop RTS & DTR. */ + if (tty->termios->c_cflag & HUPCL) { + ch->omodem &= ~(ch->m_rts | ch->m_dtr); + fepcmd(ch, SETMODEM, 0, ch->m_dtr | ch->m_rts, 10, 1); + } + memoff(ch); + + /* + * The channel has officialy been closed. The next time it is opened it + * will have to reinitialized. Set a flag to indicate this. + */ + /* Prevent future Digi programmed interrupts from coming active */ + port->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&epca_lock, flags); +} + +static void pc_hangup(struct tty_struct *tty) +{ + struct channel *ch; + + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + pc_flush_buffer(tty); + tty_ldisc_flush(tty); + shutdown(ch, tty); + + ch->event = 0; /* FIXME: review locking of ch->event */ + tty_port_hangup(&ch->port); + } +} + +static int pc_write(struct tty_struct *tty, + const unsigned char *buf, int bytesAvailable) +{ + unsigned int head, tail; + int dataLen; + int size; + int amountCopied; + struct channel *ch; + unsigned long flags; + int remain; + struct board_chan __iomem *bc; + + /* + * pc_write is primarily called directly by the kernel routine + * tty_write (Though it can also be called by put_char) found in + * tty_io.c. pc_write is passed a line discipline buffer where the data + * to be written out is stored. The line discipline implementation + * itself is done at the kernel level and is not brought into the + * driver. + */ + + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch == NULL) + return 0; + + /* Make a pointer to the channel data structure found on the board. */ + bc = ch->brdchan; + size = ch->txbufsize; + amountCopied = 0; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + head = readw(&bc->tin) & (size - 1); + tail = readw(&bc->tout); + + if (tail != readw(&bc->tout)) + tail = readw(&bc->tout); + tail &= (size - 1); + + if (head >= tail) { + /* head has not wrapped */ + /* + * remain (much like dataLen above) represents the total amount + * of space available on the card for data. Here dataLen + * represents the space existing between the head pointer and + * the end of buffer. This is important because a memcpy cannot + * be told to automatically wrap around when it hits the buffer + * end. + */ + dataLen = size - head; + remain = size - (head - tail) - 1; + } else { + /* head has wrapped around */ + remain = tail - head - 1; + dataLen = remain; + } + /* + * Check the space on the card. If we have more data than space; reduce + * the amount of data to fit the space. + */ + bytesAvailable = min(remain, bytesAvailable); + txwinon(ch); + while (bytesAvailable > 0) { + /* there is data to copy onto card */ + + /* + * If head is not wrapped, the below will make sure the first + * data copy fills to the end of card buffer. + */ + dataLen = min(bytesAvailable, dataLen); + memcpy_toio(ch->txptr + head, buf, dataLen); + buf += dataLen; + head += dataLen; + amountCopied += dataLen; + bytesAvailable -= dataLen; + + if (head >= size) { + head = 0; + dataLen = tail; + } + } + ch->statusflags |= TXBUSY; + globalwinon(ch); + writew(head, &bc->tin); + + if ((ch->statusflags & LOWWAIT) == 0) { + ch->statusflags |= LOWWAIT; + writeb(1, &bc->ilow); + } + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + return amountCopied; +} + +static int pc_write_room(struct tty_struct *tty) +{ + int remain = 0; + struct channel *ch; + unsigned long flags; + unsigned int head, tail; + struct board_chan __iomem *bc; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + bc = ch->brdchan; + head = readw(&bc->tin) & (ch->txbufsize - 1); + tail = readw(&bc->tout); + + if (tail != readw(&bc->tout)) + tail = readw(&bc->tout); + /* Wrap tail if necessary */ + tail &= (ch->txbufsize - 1); + remain = tail - head - 1; + if (remain < 0) + remain += ch->txbufsize; + + if (remain && (ch->statusflags & LOWWAIT) == 0) { + ch->statusflags |= LOWWAIT; + writeb(1, &bc->ilow); + } + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + } + /* Return how much room is left on card */ + return remain; +} + +static int pc_chars_in_buffer(struct tty_struct *tty) +{ + int chars; + unsigned int ctail, head, tail; + int remain; + unsigned long flags; + struct channel *ch; + struct board_chan __iomem *bc; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch == NULL) + return 0; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + bc = ch->brdchan; + tail = readw(&bc->tout); + head = readw(&bc->tin); + ctail = readw(&ch->mailbox->cout); + + if (tail == head && readw(&ch->mailbox->cin) == ctail && + readb(&bc->tbusy) == 0) + chars = 0; + else { /* Begin if some space on the card has been used */ + head = readw(&bc->tin) & (ch->txbufsize - 1); + tail &= (ch->txbufsize - 1); + /* + * The logic here is basically opposite of the above + * pc_write_room here we are finding the amount of bytes in the + * buffer filled. Not the amount of bytes empty. + */ + remain = tail - head - 1; + if (remain < 0) + remain += ch->txbufsize; + chars = (int)(ch->txbufsize - remain); + /* + * Make it possible to wakeup anything waiting for output in + * tty_ioctl.c, etc. + * + * If not already set. Setup an event to indicate when the + * transmit buffer empties. + */ + if (!(ch->statusflags & EMPTYWAIT)) + setup_empty_event(tty, ch); + } /* End if some space on the card has been used */ + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + /* Return number of characters residing on card. */ + return chars; +} + +static void pc_flush_buffer(struct tty_struct *tty) +{ + unsigned int tail; + unsigned long flags; + struct channel *ch; + struct board_chan __iomem *bc; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch == NULL) + return; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + bc = ch->brdchan; + tail = readw(&bc->tout); + /* Have FEP move tout pointer; effectively flushing transmit buffer */ + fepcmd(ch, STOUT, (unsigned) tail, 0, 0, 0); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + tty_wakeup(tty); +} + +static void pc_flush_chars(struct tty_struct *tty) +{ + struct channel *ch; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + unsigned long flags; + spin_lock_irqsave(&epca_lock, flags); + /* + * If not already set and the transmitter is busy setup an + * event to indicate when the transmit empties. + */ + if ((ch->statusflags & TXBUSY) && + !(ch->statusflags & EMPTYWAIT)) + setup_empty_event(tty, ch); + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +static int epca_carrier_raised(struct tty_port *port) +{ + struct channel *ch = container_of(port, struct channel, port); + if (ch->imodem & ch->dcd) + return 1; + return 0; +} + +static void epca_dtr_rts(struct tty_port *port, int onoff) +{ +} + +static int pc_open(struct tty_struct *tty, struct file *filp) +{ + struct channel *ch; + struct tty_port *port; + unsigned long flags; + int line, retval, boardnum; + struct board_chan __iomem *bc; + unsigned int head; + + line = tty->index; + if (line < 0 || line >= nbdevs) + return -ENODEV; + + ch = &digi_channels[line]; + port = &ch->port; + boardnum = ch->boardnum; + + /* Check status of board configured in system. */ + + /* + * I check to see if the epca_setup routine detected a user error. It + * might be better to put this in pc_init, but for the moment it goes + * here. + */ + if (invalid_lilo_config) { + if (setup_error_code & INVALID_BOARD_TYPE) + printk(KERN_ERR "epca: pc_open: Invalid board type specified in kernel options.\n"); + if (setup_error_code & INVALID_NUM_PORTS) + printk(KERN_ERR "epca: pc_open: Invalid number of ports specified in kernel options.\n"); + if (setup_error_code & INVALID_MEM_BASE) + printk(KERN_ERR "epca: pc_open: Invalid board memory address specified in kernel options.\n"); + if (setup_error_code & INVALID_PORT_BASE) + printk(KERN_ERR "epca; pc_open: Invalid board port address specified in kernel options.\n"); + if (setup_error_code & INVALID_BOARD_STATUS) + printk(KERN_ERR "epca: pc_open: Invalid board status specified in kernel options.\n"); + if (setup_error_code & INVALID_ALTPIN) + printk(KERN_ERR "epca: pc_open: Invalid board altpin specified in kernel options;\n"); + tty->driver_data = NULL; /* Mark this device as 'down' */ + return -ENODEV; + } + if (boardnum >= num_cards || boards[boardnum].status == DISABLED) { + tty->driver_data = NULL; /* Mark this device as 'down' */ + return(-ENODEV); + } + + bc = ch->brdchan; + if (bc == NULL) { + tty->driver_data = NULL; + return -ENODEV; + } + + spin_lock_irqsave(&port->lock, flags); + /* + * Every time a channel is opened, increment a counter. This is + * necessary because we do not wish to flush and shutdown the channel + * until the last app holding the channel open, closes it. + */ + port->count++; + /* + * Set a kernel structures pointer to our local channel structure. This + * way we can get to it when passed only a tty struct. + */ + tty->driver_data = ch; + port->tty = tty; + /* + * If this is the first time the channel has been opened, initialize + * the tty->termios struct otherwise let pc_close handle it. + */ + spin_lock(&epca_lock); + globalwinon(ch); + ch->statusflags = 0; + + /* Save boards current modem status */ + ch->imodem = readb(&bc->mstat); + + /* + * Set receive head and tail ptrs to each other. This indicates no data + * available to read. + */ + head = readw(&bc->rin); + writew(head, &bc->rout); + + /* Set the channels associated tty structure */ + + /* + * The below routine generally sets up parity, baud, flow control + * issues, etc.... It effect both control flags and input flags. + */ + epcaparam(tty, ch); + memoff(ch); + spin_unlock(&epca_lock); + port->flags |= ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); + + retval = tty_port_block_til_ready(port, tty, filp); + if (retval) + return retval; + /* + * Set this again in case a hangup set it to zero while this open() was + * waiting for the line... + */ + spin_lock_irqsave(&port->lock, flags); + port->tty = tty; + spin_lock(&epca_lock); + globalwinon(ch); + /* Enable Digi Data events */ + writeb(1, &bc->idata); + memoff(ch); + spin_unlock(&epca_lock); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +static int __init epca_module_init(void) +{ + return pc_init(); +} +module_init(epca_module_init); + +static struct pci_driver epca_driver; + +static void __exit epca_module_exit(void) +{ + int count, crd; + struct board_info *bd; + struct channel *ch; + + del_timer_sync(&epca_timer); + + if (tty_unregister_driver(pc_driver) || + tty_unregister_driver(pc_info)) { + printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n"); + return; + } + put_tty_driver(pc_driver); + put_tty_driver(pc_info); + + for (crd = 0; crd < num_cards; crd++) { + bd = &boards[crd]; + if (!bd) { /* sanity check */ + printk(KERN_ERR " - Digi : cleanup_module failed\n"); + return; + } + ch = card_ptr[crd]; + for (count = 0; count < bd->numports; count++, ch++) { + struct tty_struct *tty = tty_port_tty_get(&ch->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } + } + } + pci_unregister_driver(&epca_driver); +} +module_exit(epca_module_exit); + +static const struct tty_operations pc_ops = { + .open = pc_open, + .close = pc_close, + .write = pc_write, + .write_room = pc_write_room, + .flush_buffer = pc_flush_buffer, + .chars_in_buffer = pc_chars_in_buffer, + .flush_chars = pc_flush_chars, + .ioctl = pc_ioctl, + .set_termios = pc_set_termios, + .stop = pc_stop, + .start = pc_start, + .throttle = pc_throttle, + .unthrottle = pc_unthrottle, + .hangup = pc_hangup, + .break_ctl = pc_send_break +}; + +static const struct tty_port_operations epca_port_ops = { + .carrier_raised = epca_carrier_raised, + .dtr_rts = epca_dtr_rts, +}; + +static int info_open(struct tty_struct *tty, struct file *filp) +{ + return 0; +} + +static const struct tty_operations info_ops = { + .open = info_open, + .ioctl = info_ioctl, +}; + +static int __init pc_init(void) +{ + int crd; + struct board_info *bd; + unsigned char board_id = 0; + int err = -ENOMEM; + + int pci_boards_found, pci_count; + + pci_count = 0; + + pc_driver = alloc_tty_driver(MAX_ALLOC); + if (!pc_driver) + goto out1; + + pc_info = alloc_tty_driver(MAX_ALLOC); + if (!pc_info) + goto out2; + + /* + * If epca_setup has not been ran by LILO set num_cards to defaults; + * copy board structure defined by digiConfig into drivers board + * structure. Note : If LILO has ran epca_setup then epca_setup will + * handle defining num_cards as well as copying the data into the board + * structure. + */ + if (!liloconfig) { + /* driver has been configured via. epcaconfig */ + nbdevs = NBDEVS; + num_cards = NUMCARDS; + memcpy(&boards, &static_boards, + sizeof(struct board_info) * NUMCARDS); + } + + /* + * Note : If lilo was used to configure the driver and the ignore + * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards + * will equal 0 at this point. This is okay; PCI cards will still be + * picked up if detected. + */ + + /* + * Set up interrupt, we will worry about memory allocation in + * post_fep_init. + */ + printk(KERN_INFO "DIGI epca driver version %s loaded.\n", VERSION); + + /* + * NOTE : This code assumes that the number of ports found in the + * boards array is correct. This could be wrong if the card in question + * is PCI (And therefore has no ports entry in the boards structure.) + * The rest of the information will be valid for PCI because the + * beginning of pc_init scans for PCI and determines i/o and base + * memory addresses. I am not sure if it is possible to read the number + * of ports supported by the card prior to it being booted (Since that + * is the state it is in when pc_init is run). Because it is not + * possible to query the number of supported ports until after the card + * has booted; we are required to calculate the card_ptrs as the card + * is initialized (Inside post_fep_init). The negative thing about this + * approach is that digiDload's call to GET_INFO will have a bad port + * value. (Since this is called prior to post_fep_init.) + */ + pci_boards_found = 0; + if (num_cards < MAXBOARDS) + pci_boards_found += init_PCI(); + num_cards += pci_boards_found; + + pc_driver->owner = THIS_MODULE; + pc_driver->name = "ttyD"; + pc_driver->major = DIGI_MAJOR; + pc_driver->minor_start = 0; + pc_driver->type = TTY_DRIVER_TYPE_SERIAL; + pc_driver->subtype = SERIAL_TYPE_NORMAL; + pc_driver->init_termios = tty_std_termios; + pc_driver->init_termios.c_iflag = 0; + pc_driver->init_termios.c_oflag = 0; + pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; + pc_driver->init_termios.c_lflag = 0; + pc_driver->init_termios.c_ispeed = 9600; + pc_driver->init_termios.c_ospeed = 9600; + pc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK; + tty_set_operations(pc_driver, &pc_ops); + + pc_info->owner = THIS_MODULE; + pc_info->name = "digi_ctl"; + pc_info->major = DIGIINFOMAJOR; + pc_info->minor_start = 0; + pc_info->type = TTY_DRIVER_TYPE_SERIAL; + pc_info->subtype = SERIAL_TYPE_INFO; + pc_info->init_termios = tty_std_termios; + pc_info->init_termios.c_iflag = 0; + pc_info->init_termios.c_oflag = 0; + pc_info->init_termios.c_lflag = 0; + pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL; + pc_info->init_termios.c_ispeed = 9600; + pc_info->init_termios.c_ospeed = 9600; + pc_info->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(pc_info, &info_ops); + + + for (crd = 0; crd < num_cards; crd++) { + /* + * This is where the appropriate memory handlers for the + * hardware is set. Everything at runtime blindly jumps through + * these vectors. + */ + + /* defined in epcaconfig.h */ + bd = &boards[crd]; + + switch (bd->type) { + case PCXEM: + case EISAXEM: + bd->memwinon = pcxem_memwinon; + bd->memwinoff = pcxem_memwinoff; + bd->globalwinon = pcxem_globalwinon; + bd->txwinon = pcxem_txwinon; + bd->rxwinon = pcxem_rxwinon; + bd->memoff = pcxem_memoff; + bd->assertgwinon = dummy_assertgwinon; + bd->assertmemoff = dummy_assertmemoff; + break; + + case PCIXEM: + case PCIXRJ: + case PCIXR: + bd->memwinon = dummy_memwinon; + bd->memwinoff = dummy_memwinoff; + bd->globalwinon = dummy_globalwinon; + bd->txwinon = dummy_txwinon; + bd->rxwinon = dummy_rxwinon; + bd->memoff = dummy_memoff; + bd->assertgwinon = dummy_assertgwinon; + bd->assertmemoff = dummy_assertmemoff; + break; + + case PCXE: + case PCXEVE: + bd->memwinon = pcxe_memwinon; + bd->memwinoff = pcxe_memwinoff; + bd->globalwinon = pcxe_globalwinon; + bd->txwinon = pcxe_txwinon; + bd->rxwinon = pcxe_rxwinon; + bd->memoff = pcxe_memoff; + bd->assertgwinon = dummy_assertgwinon; + bd->assertmemoff = dummy_assertmemoff; + break; + + case PCXI: + case PC64XE: + bd->memwinon = pcxi_memwinon; + bd->memwinoff = pcxi_memwinoff; + bd->globalwinon = pcxi_globalwinon; + bd->txwinon = pcxi_txwinon; + bd->rxwinon = pcxi_rxwinon; + bd->memoff = pcxi_memoff; + bd->assertgwinon = pcxi_assertgwinon; + bd->assertmemoff = pcxi_assertmemoff; + break; + + default: + break; + } + + /* + * Some cards need a memory segment to be defined for use in + * transmit and receive windowing operations. These boards are + * listed in the below switch. In the case of the XI the amount + * of memory on the board is variable so the memory_seg is also + * variable. This code determines what they segment should be. + */ + switch (bd->type) { + case PCXE: + case PCXEVE: + case PC64XE: + bd->memory_seg = 0xf000; + break; + + case PCXI: + board_id = inb((int)bd->port); + if ((board_id & 0x1) == 0x1) { + /* it's an XI card */ + /* Is it a 64K board */ + if ((board_id & 0x30) == 0) + bd->memory_seg = 0xf000; + + /* Is it a 128K board */ + if ((board_id & 0x30) == 0x10) + bd->memory_seg = 0xe000; + + /* Is is a 256K board */ + if ((board_id & 0x30) == 0x20) + bd->memory_seg = 0xc000; + + /* Is it a 512K board */ + if ((board_id & 0x30) == 0x30) + bd->memory_seg = 0x8000; + } else + printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n", (int)bd->port); + break; + } + } + + err = tty_register_driver(pc_driver); + if (err) { + printk(KERN_ERR "Couldn't register Digi PC/ driver"); + goto out3; + } + + err = tty_register_driver(pc_info); + if (err) { + printk(KERN_ERR "Couldn't register Digi PC/ info "); + goto out4; + } + + /* Start up the poller to check for events on all enabled boards */ + init_timer(&epca_timer); + epca_timer.function = epcapoll; + mod_timer(&epca_timer, jiffies + HZ/25); + return 0; + +out4: + tty_unregister_driver(pc_driver); +out3: + put_tty_driver(pc_info); +out2: + put_tty_driver(pc_driver); +out1: + return err; +} + +static void post_fep_init(unsigned int crd) +{ + int i; + void __iomem *memaddr; + struct global_data __iomem *gd; + struct board_info *bd; + struct board_chan __iomem *bc; + struct channel *ch; + int shrinkmem = 0, lowwater; + + /* + * This call is made by the user via. the ioctl call DIGI_INIT. It is + * responsible for setting up all the card specific stuff. + */ + bd = &boards[crd]; + + /* + * If this is a PCI board, get the port info. Remember PCI cards do not + * have entries into the epcaconfig.h file, so we can't get the number + * of ports from it. Unfortunetly, this means that anyone doing a + * DIGI_GETINFO before the board has booted will get an invalid number + * of ports returned (It should return 0). Calls to DIGI_GETINFO after + * DIGI_INIT has been called will return the proper values. + */ + if (bd->type >= PCIXEM) { /* Begin get PCI number of ports */ + /* + * Below we use XEMPORTS as a memory offset regardless of which + * PCI card it is. This is because all of the supported PCI + * cards have the same memory offset for the channel data. This + * will have to be changed if we ever develop a PCI/XE card. + * NOTE : The FEP manual states that the port offset is 0xC22 + * as opposed to 0xC02. This is only true for PC/XE, and PC/XI + * cards; not for the XEM, or CX series. On the PCI cards the + * number of ports is determined by reading a ID PROM located + * in the box attached to the card. The card can then determine + * the index the id to determine the number of ports available. + * (FYI - The id should be located at 0x1ac (And may use up to + * 4 bytes if the box in question is a XEM or CX)). + */ + /* PCI cards are already remapped at this point ISA are not */ + bd->numports = readw(bd->re_map_membase + XEMPORTS); + epcaassert(bd->numports <= 64, "PCI returned a invalid number of ports"); + nbdevs += (bd->numports); + } else { + /* Fix up the mappings for ISA/EISA etc */ + /* FIXME: 64K - can we be smarter ? */ + bd->re_map_membase = ioremap_nocache(bd->membase, 0x10000); + } + + if (crd != 0) + card_ptr[crd] = card_ptr[crd-1] + boards[crd-1].numports; + else + card_ptr[crd] = &digi_channels[crd]; /* <- For card 0 only */ + + ch = card_ptr[crd]; + epcaassert(ch <= &digi_channels[nbdevs - 1], "ch out of range"); + + memaddr = bd->re_map_membase; + + /* + * The below assignment will set bc to point at the BEGINING of the + * cards channel structures. For 1 card there will be between 8 and 64 + * of these structures. + */ + bc = memaddr + CHANSTRUCT; + + /* + * The below assignment will set gd to point at the BEGINING of global + * memory address 0xc00. The first data in that global memory actually + * starts at address 0xc1a. The command in pointer begins at 0xd10. + */ + gd = memaddr + GLOBAL; + + /* + * XEPORTS (address 0xc22) points at the number of channels the card + * supports. (For 64XE, XI, XEM, and XR use 0xc02) + */ + if ((bd->type == PCXEVE || bd->type == PCXE) && + (readw(memaddr + XEPORTS) < 3)) + shrinkmem = 1; + if (bd->type < PCIXEM) + if (!request_region((int)bd->port, 4, board_desc[bd->type])) + return; + memwinon(bd, 0); + + /* + * Remember ch is the main drivers channels structure, while bc is the + * cards channel structure. + */ + for (i = 0; i < bd->numports; i++, ch++, bc++) { + unsigned long flags; + u16 tseg, rseg; + + tty_port_init(&ch->port); + ch->port.ops = &epca_port_ops; + ch->brdchan = bc; + ch->mailbox = gd; + INIT_WORK(&ch->tqueue, do_softint); + ch->board = &boards[crd]; + + spin_lock_irqsave(&epca_lock, flags); + switch (bd->type) { + /* + * Since some of the boards use different bitmaps for + * their control signals we cannot hard code these + * values and retain portability. We virtualize this + * data here. + */ + case EISAXEM: + case PCXEM: + case PCIXEM: + case PCIXRJ: + case PCIXR: + ch->m_rts = 0x02; + ch->m_dcd = 0x80; + ch->m_dsr = 0x20; + ch->m_cts = 0x10; + ch->m_ri = 0x40; + ch->m_dtr = 0x01; + break; + + case PCXE: + case PCXEVE: + case PCXI: + case PC64XE: + ch->m_rts = 0x02; + ch->m_dcd = 0x08; + ch->m_dsr = 0x10; + ch->m_cts = 0x20; + ch->m_ri = 0x40; + ch->m_dtr = 0x80; + break; + } + + if (boards[crd].altpin) { + ch->dsr = ch->m_dcd; + ch->dcd = ch->m_dsr; + ch->digiext.digi_flags |= DIGI_ALTPIN; + } else { + ch->dcd = ch->m_dcd; + ch->dsr = ch->m_dsr; + } + + ch->boardnum = crd; + ch->channelnum = i; + ch->magic = EPCA_MAGIC; + tty_port_tty_set(&ch->port, NULL); + + if (shrinkmem) { + fepcmd(ch, SETBUFFER, 32, 0, 0, 0); + shrinkmem = 0; + } + + tseg = readw(&bc->tseg); + rseg = readw(&bc->rseg); + + switch (bd->type) { + case PCIXEM: + case PCIXRJ: + case PCIXR: + /* Cover all the 2MEG cards */ + ch->txptr = memaddr + ((tseg << 4) & 0x1fffff); + ch->rxptr = memaddr + ((rseg << 4) & 0x1fffff); + ch->txwin = FEPWIN | (tseg >> 11); + ch->rxwin = FEPWIN | (rseg >> 11); + break; + + case PCXEM: + case EISAXEM: + /* Cover all the 32K windowed cards */ + /* Mask equal to window size - 1 */ + ch->txptr = memaddr + ((tseg << 4) & 0x7fff); + ch->rxptr = memaddr + ((rseg << 4) & 0x7fff); + ch->txwin = FEPWIN | (tseg >> 11); + ch->rxwin = FEPWIN | (rseg >> 11); + break; + + case PCXEVE: + case PCXE: + ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) + & 0x1fff); + ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9); + ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) + & 0x1fff); + ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >> 9); + break; + + case PCXI: + case PC64XE: + ch->txptr = memaddr + ((tseg - bd->memory_seg) << 4); + ch->rxptr = memaddr + ((rseg - bd->memory_seg) << 4); + ch->txwin = ch->rxwin = 0; + break; + } + + ch->txbufhead = 0; + ch->txbufsize = readw(&bc->tmax) + 1; + + ch->rxbufhead = 0; + ch->rxbufsize = readw(&bc->rmax) + 1; + + lowwater = ch->txbufsize >= 2000 ? 1024 : (ch->txbufsize / 2); + + /* Set transmitter low water mark */ + fepcmd(ch, STXLWATER, lowwater, 0, 10, 0); + + /* Set receiver low water mark */ + fepcmd(ch, SRXLWATER, (ch->rxbufsize / 4), 0, 10, 0); + + /* Set receiver high water mark */ + fepcmd(ch, SRXHWATER, (3 * ch->rxbufsize / 4), 0, 10, 0); + + writew(100, &bc->edelay); + writeb(1, &bc->idata); + + ch->startc = readb(&bc->startc); + ch->stopc = readb(&bc->stopc); + ch->startca = readb(&bc->startca); + ch->stopca = readb(&bc->stopca); + + ch->fepcflag = 0; + ch->fepiflag = 0; + ch->fepoflag = 0; + ch->fepstartc = 0; + ch->fepstopc = 0; + ch->fepstartca = 0; + ch->fepstopca = 0; + + ch->port.close_delay = 50; + + spin_unlock_irqrestore(&epca_lock, flags); + } + + printk(KERN_INFO + "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n", + VERSION, board_desc[bd->type], (long)bd->port, + (long)bd->membase, bd->numports); + memwinoff(bd, 0); +} + +static void epcapoll(unsigned long ignored) +{ + unsigned long flags; + int crd; + unsigned int head, tail; + struct channel *ch; + struct board_info *bd; + + /* + * This routine is called upon every timer interrupt. Even though the + * Digi series cards are capable of generating interrupts this method + * of non-looping polling is more efficient. This routine checks for + * card generated events (Such as receive data, are transmit buffer + * empty) and acts on those events. + */ + for (crd = 0; crd < num_cards; crd++) { + bd = &boards[crd]; + ch = card_ptr[crd]; + + if ((bd->status == DISABLED) || digi_poller_inhibited) + continue; + + /* + * assertmemoff is not needed here; indeed it is an empty + * subroutine. It is being kept because future boards may need + * this as well as some legacy boards. + */ + spin_lock_irqsave(&epca_lock, flags); + + assertmemoff(ch); + + globalwinon(ch); + + /* + * In this case head and tail actually refer to the event queue + * not the transmit or receive queue. + */ + head = readw(&ch->mailbox->ein); + tail = readw(&ch->mailbox->eout); + + /* If head isn't equal to tail we have an event */ + if (head != tail) + doevent(crd); + memoff(ch); + + spin_unlock_irqrestore(&epca_lock, flags); + } /* End for each card */ + mod_timer(&epca_timer, jiffies + (HZ / 25)); +} + +static void doevent(int crd) +{ + void __iomem *eventbuf; + struct channel *ch, *chan0; + static struct tty_struct *tty; + struct board_info *bd; + struct board_chan __iomem *bc; + unsigned int tail, head; + int event, channel; + int mstat, lstat; + + /* + * This subroutine is called by epcapoll when an event is detected + * in the event queue. This routine responds to those events. + */ + bd = &boards[crd]; + + chan0 = card_ptr[crd]; + epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range"); + assertgwinon(chan0); + while ((tail = readw(&chan0->mailbox->eout)) != + (head = readw(&chan0->mailbox->ein))) { + /* Begin while something in event queue */ + assertgwinon(chan0); + eventbuf = bd->re_map_membase + tail + ISTART; + /* Get the channel the event occurred on */ + channel = readb(eventbuf); + /* Get the actual event code that occurred */ + event = readb(eventbuf + 1); + /* + * The two assignments below get the current modem status + * (mstat) and the previous modem status (lstat). These are + * useful becuase an event could signal a change in modem + * signals itself. + */ + mstat = readb(eventbuf + 2); + lstat = readb(eventbuf + 3); + + ch = chan0 + channel; + if ((unsigned)channel >= bd->numports || !ch) { + if (channel >= bd->numports) + ch = chan0; + bc = ch->brdchan; + goto next; + } + + bc = ch->brdchan; + if (bc == NULL) + goto next; + + tty = tty_port_tty_get(&ch->port); + if (event & DATA_IND) { /* Begin DATA_IND */ + receive_data(ch, tty); + assertgwinon(ch); + } /* End DATA_IND */ + /* else *//* Fix for DCD transition missed bug */ + if (event & MODEMCHG_IND) { + /* A modem signal change has been indicated */ + ch->imodem = mstat; + if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) { + /* We are now receiving dcd */ + if (mstat & ch->dcd) + wake_up_interruptible(&ch->port.open_wait); + else /* No dcd; hangup */ + pc_sched_event(ch, EPCA_EVENT_HANGUP); + } + } + if (tty) { + if (event & BREAK_IND) { + /* A break has been indicated */ + tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_schedule_flip(tty); + } else if (event & LOWTX_IND) { + if (ch->statusflags & LOWWAIT) { + ch->statusflags &= ~LOWWAIT; + tty_wakeup(tty); + } + } else if (event & EMPTYTX_IND) { + /* This event is generated by + setup_empty_event */ + ch->statusflags &= ~TXBUSY; + if (ch->statusflags & EMPTYWAIT) { + ch->statusflags &= ~EMPTYWAIT; + tty_wakeup(tty); + } + } + tty_kref_put(tty); + } +next: + globalwinon(ch); + BUG_ON(!bc); + writew(1, &bc->idata); + writew((tail + 4) & (IMAX - ISTART - 4), &chan0->mailbox->eout); + globalwinon(chan0); + } /* End while something in event queue */ +} + +static void fepcmd(struct channel *ch, int cmd, int word_or_byte, + int byte2, int ncmds, int bytecmd) +{ + unchar __iomem *memaddr; + unsigned int head, cmdTail, cmdStart, cmdMax; + long count; + int n; + + /* This is the routine in which commands may be passed to the card. */ + + if (ch->board->status == DISABLED) + return; + assertgwinon(ch); + /* Remember head (As well as max) is just an offset not a base addr */ + head = readw(&ch->mailbox->cin); + /* cmdStart is a base address */ + cmdStart = readw(&ch->mailbox->cstart); + /* + * We do the addition below because we do not want a max pointer + * relative to cmdStart. We want a max pointer that points at the + * physical end of the command queue. + */ + cmdMax = (cmdStart + 4 + readw(&ch->mailbox->cmax)); + memaddr = ch->board->re_map_membase; + + if (head >= (cmdMax - cmdStart) || (head & 03)) { + printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", + __LINE__, cmd, head); + printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", + __LINE__, cmdMax, cmdStart); + return; + } + if (bytecmd) { + writeb(cmd, memaddr + head + cmdStart + 0); + writeb(ch->channelnum, memaddr + head + cmdStart + 1); + /* Below word_or_byte is bits to set */ + writeb(word_or_byte, memaddr + head + cmdStart + 2); + /* Below byte2 is bits to reset */ + writeb(byte2, memaddr + head + cmdStart + 3); + } else { + writeb(cmd, memaddr + head + cmdStart + 0); + writeb(ch->channelnum, memaddr + head + cmdStart + 1); + writeb(word_or_byte, memaddr + head + cmdStart + 2); + } + head = (head + 4) & (cmdMax - cmdStart - 4); + writew(head, &ch->mailbox->cin); + count = FEPTIMEOUT; + + for (;;) { + count--; + if (count == 0) { + printk(KERN_ERR " - Fep not responding in fepcmd()\n"); + return; + } + head = readw(&ch->mailbox->cin); + cmdTail = readw(&ch->mailbox->cout); + n = (head - cmdTail) & (cmdMax - cmdStart - 4); + /* + * Basically this will break when the FEP acknowledges the + * command by incrementing cmdTail (Making it equal to head). + */ + if (n <= ncmds * (sizeof(short) * 4)) + break; + } +} + +/* + * Digi products use fields in their channels structures that are very similar + * to the c_cflag and c_iflag fields typically found in UNIX termios + * structures. The below three routines allow mappings between these hardware + * "flags" and their respective Linux flags. + */ +static unsigned termios2digi_h(struct channel *ch, unsigned cflag) +{ + unsigned res = 0; + + if (cflag & CRTSCTS) { + ch->digiext.digi_flags |= (RTSPACE | CTSPACE); + res |= ((ch->m_cts) | (ch->m_rts)); + } + + if (ch->digiext.digi_flags & RTSPACE) + res |= ch->m_rts; + + if (ch->digiext.digi_flags & DTRPACE) + res |= ch->m_dtr; + + if (ch->digiext.digi_flags & CTSPACE) + res |= ch->m_cts; + + if (ch->digiext.digi_flags & DSRPACE) + res |= ch->dsr; + + if (ch->digiext.digi_flags & DCDPACE) + res |= ch->dcd; + + if (res & (ch->m_rts)) + ch->digiext.digi_flags |= RTSPACE; + + if (res & (ch->m_cts)) + ch->digiext.digi_flags |= CTSPACE; + + return res; +} + +static unsigned termios2digi_i(struct channel *ch, unsigned iflag) +{ + unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK | + INPCK | ISTRIP | IXON | IXANY | IXOFF); + if (ch->digiext.digi_flags & DIGI_AIXON) + res |= IAIXON; + return res; +} + +static unsigned termios2digi_c(struct channel *ch, unsigned cflag) +{ + unsigned res = 0; + if (cflag & CBAUDEX) { + ch->digiext.digi_flags |= DIGI_FAST; + /* + * HUPCL bit is used by FEP to indicate fast baud table is to + * be used. + */ + res |= FEP_HUPCL; + } else + ch->digiext.digi_flags &= ~DIGI_FAST; + /* + * CBAUD has bit position 0x1000 set these days to indicate Linux + * baud rate remap. Digi hardware can't handle the bit assignment. + * (We use a different bit assignment for high speed.). Clear this + * bit out. + */ + res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE); + /* + * This gets a little confusing. The Digi cards have their own + * representation of c_cflags controlling baud rate. For the most part + * this is identical to the Linux implementation. However; Digi + * supports one rate (76800) that Linux doesn't. This means that the + * c_cflag entry that would normally mean 76800 for Digi actually means + * 115200 under Linux. Without the below mapping, a stty 115200 would + * only drive the board at 76800. Since the rate 230400 is also found + * after 76800, the same problem afflicts us when we choose a rate of + * 230400. Without the below modificiation stty 230400 would actually + * give us 115200. + * + * There are two additional differences. The Linux value for CLOCAL + * (0x800; 0004000) has no meaning to the Digi hardware. Also in later + * releases of Linux; the CBAUD define has CBAUDEX (0x1000; 0010000) + * ored into it (CBAUD = 0x100f as opposed to 0xf). CBAUDEX should be + * checked for a screened out prior to termios2digi_c returning. Since + * CLOCAL isn't used by the board this can be ignored as long as the + * returned value is used only by Digi hardware. + */ + if (cflag & CBAUDEX) { + /* + * The below code is trying to guarantee that only baud rates + * 115200 and 230400 are remapped. We use exclusive or because + * the various baud rates share common bit positions and + * therefore can't be tested for easily. + */ + if ((!((cflag & 0x7) ^ (B115200 & ~CBAUDEX))) || + (!((cflag & 0x7) ^ (B230400 & ~CBAUDEX)))) + res += 1; + } + return res; +} + +/* Caller must hold the locks */ +static void epcaparam(struct tty_struct *tty, struct channel *ch) +{ + unsigned int cmdHead; + struct ktermios *ts; + struct board_chan __iomem *bc; + unsigned mval, hflow, cflag, iflag; + + bc = ch->brdchan; + epcaassert(bc != NULL, "bc out of range"); + + assertgwinon(ch); + ts = tty->termios; + if ((ts->c_cflag & CBAUD) == 0) { /* Begin CBAUD detected */ + cmdHead = readw(&bc->rin); + writew(cmdHead, &bc->rout); + cmdHead = readw(&bc->tin); + /* Changing baud in mid-stream transmission can be wonderful */ + /* + * Flush current transmit buffer by setting cmdTail pointer + * (tout) to cmdHead pointer (tin). Hopefully the transmit + * buffer is empty. + */ + fepcmd(ch, STOUT, (unsigned) cmdHead, 0, 0, 0); + mval = 0; + } else { /* Begin CBAUD not detected */ + /* + * c_cflags have changed but that change had nothing to do with + * BAUD. Propagate the change to the card. + */ + cflag = termios2digi_c(ch, ts->c_cflag); + if (cflag != ch->fepcflag) { + ch->fepcflag = cflag; + /* Set baud rate, char size, stop bits, parity */ + fepcmd(ch, SETCTRLFLAGS, (unsigned) cflag, 0, 0, 0); + } + /* + * If the user has not forced CLOCAL and if the device is not a + * CALLOUT device (Which is always CLOCAL) we set flags such + * that the driver will wait on carrier detect. + */ + if (ts->c_cflag & CLOCAL) + clear_bit(ASYNCB_CHECK_CD, &ch->port.flags); + else + set_bit(ASYNCB_CHECK_CD, &ch->port.flags); + mval = ch->m_dtr | ch->m_rts; + } /* End CBAUD not detected */ + iflag = termios2digi_i(ch, ts->c_iflag); + /* Check input mode flags */ + if (iflag != ch->fepiflag) { + ch->fepiflag = iflag; + /* + * Command sets channels iflag structure on the board. Such + * things as input soft flow control, handling of parity + * errors, and break handling are all set here. + * + * break handling, parity handling, input stripping, + * flow control chars + */ + fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0); + } + /* + * Set the board mint value for this channel. This will cause hardware + * events to be generated each time the DCD signal (Described in mint) + * changes. + */ + writeb(ch->dcd, &bc->mint); + if ((ts->c_cflag & CLOCAL) || (ch->digiext.digi_flags & DIGI_FORCEDCD)) + if (ch->digiext.digi_flags & DIGI_FORCEDCD) + writeb(0, &bc->mint); + ch->imodem = readb(&bc->mstat); + hflow = termios2digi_h(ch, ts->c_cflag); + if (hflow != ch->hflow) { + ch->hflow = hflow; + /* + * Hard flow control has been selected but the board is not + * using it. Activate hard flow control now. + */ + fepcmd(ch, SETHFLOW, hflow, 0xff, 0, 1); + } + mval ^= ch->modemfake & (mval ^ ch->modem); + + if (ch->omodem ^ mval) { + ch->omodem = mval; + /* + * The below command sets the DTR and RTS mstat structure. If + * hard flow control is NOT active these changes will drive the + * output of the actual DTR and RTS lines. If hard flow control + * is active, the changes will be saved in the mstat structure + * and only asserted when hard flow control is turned off. + */ + + /* First reset DTR & RTS; then set them */ + fepcmd(ch, SETMODEM, 0, ((ch->m_dtr)|(ch->m_rts)), 0, 1); + fepcmd(ch, SETMODEM, mval, 0, 0, 1); + } + if (ch->startc != ch->fepstartc || ch->stopc != ch->fepstopc) { + ch->fepstartc = ch->startc; + ch->fepstopc = ch->stopc; + /* + * The XON / XOFF characters have changed; propagate these + * changes to the card. + */ + fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1); + } + if (ch->startca != ch->fepstartca || ch->stopca != ch->fepstopca) { + ch->fepstartca = ch->startca; + ch->fepstopca = ch->stopca; + /* + * Similar to the above, this time the auxilarly XON / XOFF + * characters have changed; propagate these changes to the card. + */ + fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1); + } +} + +/* Caller holds lock */ +static void receive_data(struct channel *ch, struct tty_struct *tty) +{ + unchar *rptr; + struct ktermios *ts = NULL; + struct board_chan __iomem *bc; + int dataToRead, wrapgap, bytesAvailable; + unsigned int tail, head; + unsigned int wrapmask; + + /* + * This routine is called by doint when a receive data event has taken + * place. + */ + globalwinon(ch); + if (ch->statusflags & RXSTOPPED) + return; + if (tty) + ts = tty->termios; + bc = ch->brdchan; + BUG_ON(!bc); + wrapmask = ch->rxbufsize - 1; + + /* + * Get the head and tail pointers to the receiver queue. Wrap the head + * pointer if it has reached the end of the buffer. + */ + head = readw(&bc->rin); + head &= wrapmask; + tail = readw(&bc->rout) & wrapmask; + + bytesAvailable = (head - tail) & wrapmask; + if (bytesAvailable == 0) + return; + + /* If CREAD bit is off or device not open, set TX tail to head */ + if (!tty || !ts || !(ts->c_cflag & CREAD)) { + writew(head, &bc->rout); + return; + } + + if (tty_buffer_request_room(tty, bytesAvailable + 1) == 0) + return; + + if (readb(&bc->orun)) { + writeb(0, &bc->orun); + printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n", + tty->name); + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + rxwinon(ch); + while (bytesAvailable > 0) { + /* Begin while there is data on the card */ + wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail; + /* + * Even if head has wrapped around only report the amount of + * data to be equal to the size - tail. Remember memcpy can't + * automaticly wrap around the receive buffer. + */ + dataToRead = (wrapgap < bytesAvailable) ? wrapgap + : bytesAvailable; + /* Make sure we don't overflow the buffer */ + dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead); + if (dataToRead == 0) + break; + /* + * Move data read from our card into the line disciplines + * buffer for translation if necessary. + */ + memcpy_fromio(rptr, ch->rxptr + tail, dataToRead); + tail = (tail + dataToRead) & wrapmask; + bytesAvailable -= dataToRead; + } /* End while there is data on the card */ + globalwinon(ch); + writew(tail, &bc->rout); + /* Must be called with global data */ + tty_schedule_flip(tty); +} + +static int info_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case DIGI_GETINFO: + { + struct digi_info di; + int brd; + + if (get_user(brd, (unsigned int __user *)arg)) + return -EFAULT; + if (brd < 0 || brd >= num_cards || num_cards == 0) + return -ENODEV; + + memset(&di, 0, sizeof(di)); + + di.board = brd; + di.status = boards[brd].status; + di.type = boards[brd].type ; + di.numports = boards[brd].numports ; + /* Legacy fixups - just move along nothing to see */ + di.port = (unsigned char *)boards[brd].port ; + di.membase = (unsigned char *)boards[brd].membase ; + + if (copy_to_user((void __user *)arg, &di, sizeof(di))) + return -EFAULT; + break; + + } + + case DIGI_POLLER: + { + int brd = arg & 0xff000000 >> 16; + unsigned char state = arg & 0xff; + + if (brd < 0 || brd >= num_cards) { + printk(KERN_ERR "epca: DIGI POLLER : brd not valid!\n"); + return -ENODEV; + } + digi_poller_inhibited = state; + break; + } + + case DIGI_INIT: + { + /* + * This call is made by the apps to complete the + * initialization of the board(s). This routine is + * responsible for setting the card to its initial + * state and setting the drivers control fields to the + * sutianle settings for the card in question. + */ + int crd; + for (crd = 0; crd < num_cards; crd++) + post_fep_init(crd); + break; + } + default: + return -ENOTTY; + } + return 0; +} + +static int pc_tiocmget(struct tty_struct *tty) +{ + struct channel *ch = tty->driver_data; + struct board_chan __iomem *bc; + unsigned int mstat, mflag = 0; + unsigned long flags; + + if (ch) + bc = ch->brdchan; + else + return -EINVAL; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + mstat = readb(&bc->mstat); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + + if (mstat & ch->m_dtr) + mflag |= TIOCM_DTR; + if (mstat & ch->m_rts) + mflag |= TIOCM_RTS; + if (mstat & ch->m_cts) + mflag |= TIOCM_CTS; + if (mstat & ch->dsr) + mflag |= TIOCM_DSR; + if (mstat & ch->m_ri) + mflag |= TIOCM_RI; + if (mstat & ch->dcd) + mflag |= TIOCM_CD; + return mflag; +} + +static int pc_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct channel *ch = tty->driver_data; + unsigned long flags; + + if (!ch) + return -EINVAL; + + spin_lock_irqsave(&epca_lock, flags); + /* + * I think this modemfake stuff is broken. It doesn't correctly reflect + * the behaviour desired by the TIOCM* ioctls. Therefore this is + * probably broken. + */ + if (set & TIOCM_RTS) { + ch->modemfake |= ch->m_rts; + ch->modem |= ch->m_rts; + } + if (set & TIOCM_DTR) { + ch->modemfake |= ch->m_dtr; + ch->modem |= ch->m_dtr; + } + if (clear & TIOCM_RTS) { + ch->modemfake |= ch->m_rts; + ch->modem &= ~ch->m_rts; + } + if (clear & TIOCM_DTR) { + ch->modemfake |= ch->m_dtr; + ch->modem &= ~ch->m_dtr; + } + globalwinon(ch); + /* + * The below routine generally sets up parity, baud, flow control + * issues, etc.... It effect both control flags and input flags. + */ + epcaparam(tty, ch); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + return 0; +} + +static int pc_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + digiflow_t dflow; + unsigned long flags; + unsigned int mflag, mstat; + unsigned char startc, stopc; + struct board_chan __iomem *bc; + struct channel *ch = tty->driver_data; + void __user *argp = (void __user *)arg; + + if (ch) + bc = ch->brdchan; + else + return -EINVAL; + switch (cmd) { + case TIOCMODG: + mflag = pc_tiocmget(tty); + if (put_user(mflag, (unsigned long __user *)argp)) + return -EFAULT; + break; + case TIOCMODS: + if (get_user(mstat, (unsigned __user *)argp)) + return -EFAULT; + return pc_tiocmset(tty, mstat, ~mstat); + case TIOCSDTR: + spin_lock_irqsave(&epca_lock, flags); + ch->omodem |= ch->m_dtr; + globalwinon(ch); + fepcmd(ch, SETMODEM, ch->m_dtr, 0, 10, 1); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + break; + + case TIOCCDTR: + spin_lock_irqsave(&epca_lock, flags); + ch->omodem &= ~ch->m_dtr; + globalwinon(ch); + fepcmd(ch, SETMODEM, 0, ch->m_dtr, 10, 1); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + break; + case DIGI_GETA: + if (copy_to_user(argp, &ch->digiext, sizeof(digi_t))) + return -EFAULT; + break; + case DIGI_SETAW: + case DIGI_SETAF: + if (cmd == DIGI_SETAW) { + /* Setup an event to indicate when the transmit + buffer empties */ + spin_lock_irqsave(&epca_lock, flags); + setup_empty_event(tty, ch); + spin_unlock_irqrestore(&epca_lock, flags); + tty_wait_until_sent(tty, 0); + } else { + /* ldisc lock already held in ioctl */ + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); + } + /* Fall Thru */ + case DIGI_SETA: + if (copy_from_user(&ch->digiext, argp, sizeof(digi_t))) + return -EFAULT; + + if (ch->digiext.digi_flags & DIGI_ALTPIN) { + ch->dcd = ch->m_dsr; + ch->dsr = ch->m_dcd; + } else { + ch->dcd = ch->m_dcd; + ch->dsr = ch->m_dsr; + } + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + /* + * The below routine generally sets up parity, baud, flow + * control issues, etc.... It effect both control flags and + * input flags. + */ + epcaparam(tty, ch); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + break; + + case DIGI_GETFLOW: + case DIGI_GETAFLOW: + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + if (cmd == DIGI_GETFLOW) { + dflow.startc = readb(&bc->startc); + dflow.stopc = readb(&bc->stopc); + } else { + dflow.startc = readb(&bc->startca); + dflow.stopc = readb(&bc->stopca); + } + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + + if (copy_to_user(argp, &dflow, sizeof(dflow))) + return -EFAULT; + break; + + case DIGI_SETAFLOW: + case DIGI_SETFLOW: + if (cmd == DIGI_SETFLOW) { + startc = ch->startc; + stopc = ch->stopc; + } else { + startc = ch->startca; + stopc = ch->stopca; + } + + if (copy_from_user(&dflow, argp, sizeof(dflow))) + return -EFAULT; + + if (dflow.startc != startc || dflow.stopc != stopc) { + /* Begin if setflow toggled */ + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + + if (cmd == DIGI_SETFLOW) { + ch->fepstartc = ch->startc = dflow.startc; + ch->fepstopc = ch->stopc = dflow.stopc; + fepcmd(ch, SONOFFC, ch->fepstartc, + ch->fepstopc, 0, 1); + } else { + ch->fepstartca = ch->startca = dflow.startc; + ch->fepstopca = ch->stopca = dflow.stopc; + fepcmd(ch, SAUXONOFFC, ch->fepstartca, + ch->fepstopca, 0, 1); + } + + if (ch->statusflags & TXSTOPPED) + pc_start(tty); + + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + } /* End if setflow toggled */ + break; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct channel *ch; + unsigned long flags; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + + if (ch != NULL) { /* Begin if channel valid */ + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + epcaparam(tty, ch); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + ((tty->termios->c_cflag & CRTSCTS) == 0)) + tty->hw_stopped = 0; + + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&ch->port.open_wait); + + } /* End if channel valid */ +} + +static void do_softint(struct work_struct *work) +{ + struct channel *ch = container_of(work, struct channel, tqueue); + /* Called in response to a modem change event */ + if (ch && ch->magic == EPCA_MAGIC) { + struct tty_struct *tty = tty_port_tty_get(&ch->port); + + if (tty && tty->driver_data) { + if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { + tty_hangup(tty); + wake_up_interruptible(&ch->port.open_wait); + clear_bit(ASYNCB_NORMAL_ACTIVE, + &ch->port.flags); + } + } + tty_kref_put(tty); + } +} + +/* + * pc_stop and pc_start provide software flow control to the routine and the + * pc_ioctl routine. + */ +static void pc_stop(struct tty_struct *tty) +{ + struct channel *ch; + unsigned long flags; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + spin_lock_irqsave(&epca_lock, flags); + if ((ch->statusflags & TXSTOPPED) == 0) { + /* Begin if transmit stop requested */ + globalwinon(ch); + /* STOP transmitting now !! */ + fepcmd(ch, PAUSETX, 0, 0, 0, 0); + ch->statusflags |= TXSTOPPED; + memoff(ch); + } /* End if transmit stop requested */ + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +static void pc_start(struct tty_struct *tty) +{ + struct channel *ch; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + unsigned long flags; + spin_lock_irqsave(&epca_lock, flags); + /* Just in case output was resumed because of a change + in Digi-flow */ + if (ch->statusflags & TXSTOPPED) { + /* Begin transmit resume requested */ + struct board_chan __iomem *bc; + globalwinon(ch); + bc = ch->brdchan; + if (ch->statusflags & LOWWAIT) + writeb(1, &bc->ilow); + /* Okay, you can start transmitting again... */ + fepcmd(ch, RESUMETX, 0, 0, 0, 0); + ch->statusflags &= ~TXSTOPPED; + memoff(ch); + } /* End transmit resume requested */ + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +/* + * The below routines pc_throttle and pc_unthrottle are used to slow (And + * resume) the receipt of data into the kernels receive buffers. The exact + * occurrence of this depends on the size of the kernels receive buffer and + * what the 'watermarks' are set to for that buffer. See the n_ttys.c file for + * more details. + */ +static void pc_throttle(struct tty_struct *tty) +{ + struct channel *ch; + unsigned long flags; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + spin_lock_irqsave(&epca_lock, flags); + if ((ch->statusflags & RXSTOPPED) == 0) { + globalwinon(ch); + fepcmd(ch, PAUSERX, 0, 0, 0, 0); + ch->statusflags |= RXSTOPPED; + memoff(ch); + } + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +static void pc_unthrottle(struct tty_struct *tty) +{ + struct channel *ch; + unsigned long flags; + /* + * verifyChannel returns the channel from the tty struct if it is + * valid. This serves as a sanity check. + */ + ch = verifyChannel(tty); + if (ch != NULL) { + /* Just in case output was resumed because of a change + in Digi-flow */ + spin_lock_irqsave(&epca_lock, flags); + if (ch->statusflags & RXSTOPPED) { + globalwinon(ch); + fepcmd(ch, RESUMERX, 0, 0, 0, 0); + ch->statusflags &= ~RXSTOPPED; + memoff(ch); + } + spin_unlock_irqrestore(&epca_lock, flags); + } +} + +static int pc_send_break(struct tty_struct *tty, int msec) +{ + struct channel *ch = tty->driver_data; + unsigned long flags; + + if (msec == -1) + msec = 0xFFFF; + else if (msec > 0xFFFE) + msec = 0xFFFE; + else if (msec < 1) + msec = 1; + + spin_lock_irqsave(&epca_lock, flags); + globalwinon(ch); + /* + * Maybe I should send an infinite break here, schedule() for msec + * amount of time, and then stop the break. This way, the user can't + * screw up the FEP by causing digi_send_break() to be called (i.e. via + * an ioctl()) more than once in msec amount of time. + * Try this for now... + */ + fepcmd(ch, SENDBREAK, msec, 0, 10, 0); + memoff(ch); + spin_unlock_irqrestore(&epca_lock, flags); + return 0; +} + +/* Caller MUST hold the lock */ +static void setup_empty_event(struct tty_struct *tty, struct channel *ch) +{ + struct board_chan __iomem *bc = ch->brdchan; + + globalwinon(ch); + ch->statusflags |= EMPTYWAIT; + /* + * When set the iempty flag request a event to be generated when the + * transmit buffer is empty (If there is no BREAK in progress). + */ + writeb(1, &bc->iempty); + memoff(ch); +} + +#ifndef MODULE +static void __init epca_setup(char *str, int *ints) +{ + struct board_info board; + int index, loop, last; + char *temp, *t2; + unsigned len; + + /* + * If this routine looks a little strange it is because it is only + * called if a LILO append command is given to boot the kernel with + * parameters. In this way, we can provide the user a method of + * changing his board configuration without rebuilding the kernel. + */ + if (!liloconfig) + liloconfig = 1; + + memset(&board, 0, sizeof(board)); + + /* Assume the data is int first, later we can change it */ + /* I think that array position 0 of ints holds the number of args */ + for (last = 0, index = 1; index <= ints[0]; index++) + switch (index) { /* Begin parse switch */ + case 1: + board.status = ints[index]; + /* + * We check for 2 (As opposed to 1; because 2 is a flag + * instructing the driver to ignore epcaconfig.) For + * this reason we check for 2. + */ + if (board.status == 2) { + /* Begin ignore epcaconfig as well as lilo cmd line */ + nbdevs = 0; + num_cards = 0; + return; + } /* End ignore epcaconfig as well as lilo cmd line */ + + if (board.status > 2) { + printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", + board.status); + invalid_lilo_config = 1; + setup_error_code |= INVALID_BOARD_STATUS; + return; + } + last = index; + break; + case 2: + board.type = ints[index]; + if (board.type >= PCIXEM) { + printk(KERN_ERR "epca_setup: Invalid board type 0x%x\n", board.type); + invalid_lilo_config = 1; + setup_error_code |= INVALID_BOARD_TYPE; + return; + } + last = index; + break; + case 3: + board.altpin = ints[index]; + if (board.altpin > 1) { + printk(KERN_ERR "epca_setup: Invalid board altpin 0x%x\n", board.altpin); + invalid_lilo_config = 1; + setup_error_code |= INVALID_ALTPIN; + return; + } + last = index; + break; + + case 4: + board.numports = ints[index]; + if (board.numports < 2 || board.numports > 256) { + printk(KERN_ERR "epca_setup: Invalid board numports 0x%x\n", board.numports); + invalid_lilo_config = 1; + setup_error_code |= INVALID_NUM_PORTS; + return; + } + nbdevs += board.numports; + last = index; + break; + + case 5: + board.port = ints[index]; + if (ints[index] <= 0) { + printk(KERN_ERR "epca_setup: Invalid io port 0x%x\n", (unsigned int)board.port); + invalid_lilo_config = 1; + setup_error_code |= INVALID_PORT_BASE; + return; + } + last = index; + break; + + case 6: + board.membase = ints[index]; + if (ints[index] <= 0) { + printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n", + (unsigned int)board.membase); + invalid_lilo_config = 1; + setup_error_code |= INVALID_MEM_BASE; + return; + } + last = index; + break; + + default: + printk(KERN_ERR " - epca_setup: Too many integer parms\n"); + return; + + } /* End parse switch */ + + while (str && *str) { /* Begin while there is a string arg */ + /* find the next comma or terminator */ + temp = str; + /* While string is not null, and a comma hasn't been found */ + while (*temp && (*temp != ',')) + temp++; + if (!*temp) + temp = NULL; + else + *temp++ = 0; + /* Set index to the number of args + 1 */ + index = last + 1; + + switch (index) { + case 1: + len = strlen(str); + if (strncmp("Disable", str, len) == 0) + board.status = 0; + else if (strncmp("Enable", str, len) == 0) + board.status = 1; + else { + printk(KERN_ERR "epca_setup: Invalid status %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_BOARD_STATUS; + return; + } + last = index; + break; + + case 2: + for (loop = 0; loop < EPCA_NUM_TYPES; loop++) + if (strcmp(board_desc[loop], str) == 0) + break; + /* + * If the index incremented above refers to a + * legitamate board type set it here. + */ + if (index < EPCA_NUM_TYPES) + board.type = loop; + else { + printk(KERN_ERR "epca_setup: Invalid board type: %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_BOARD_TYPE; + return; + } + last = index; + break; + + case 3: + len = strlen(str); + if (strncmp("Disable", str, len) == 0) + board.altpin = 0; + else if (strncmp("Enable", str, len) == 0) + board.altpin = 1; + else { + printk(KERN_ERR "epca_setup: Invalid altpin %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_ALTPIN; + return; + } + last = index; + break; + + case 4: + t2 = str; + while (isdigit(*t2)) + t2++; + + if (*t2) { + printk(KERN_ERR "epca_setup: Invalid port count %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_NUM_PORTS; + return; + } + + /* + * There is not a man page for simple_strtoul but the + * code can be found in vsprintf.c. The first argument + * is the string to translate (To an unsigned long + * obviously), the second argument can be the address + * of any character variable or a NULL. If a variable + * is given, the end pointer of the string will be + * stored in that variable; if a NULL is given the end + * pointer will not be returned. The last argument is + * the base to use. If a 0 is indicated, the routine + * will attempt to determine the proper base by looking + * at the values prefix (A '0' for octal, a 'x' for + * hex, etc ... If a value is given it will use that + * value as the base. + */ + board.numports = simple_strtoul(str, NULL, 0); + nbdevs += board.numports; + last = index; + break; + + case 5: + t2 = str; + while (isxdigit(*t2)) + t2++; + + if (*t2) { + printk(KERN_ERR "epca_setup: Invalid i/o address %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_PORT_BASE; + return; + } + + board.port = simple_strtoul(str, NULL, 16); + last = index; + break; + + case 6: + t2 = str; + while (isxdigit(*t2)) + t2++; + + if (*t2) { + printk(KERN_ERR "epca_setup: Invalid memory base %s\n", str); + invalid_lilo_config = 1; + setup_error_code |= INVALID_MEM_BASE; + return; + } + board.membase = simple_strtoul(str, NULL, 16); + last = index; + break; + default: + printk(KERN_ERR "epca: Too many string parms\n"); + return; + } + str = temp; + } /* End while there is a string arg */ + + if (last < 6) { + printk(KERN_ERR "epca: Insufficient parms specified\n"); + return; + } + + /* I should REALLY validate the stuff here */ + /* Copies our local copy of board into boards */ + memcpy((void *)&boards[num_cards], (void *)&board, sizeof(board)); + /* Does this get called once per lilo arg are what ? */ + printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n", + num_cards, board_desc[board.type], + board.numports, (int)board.port, (unsigned int) board.membase); + num_cards++; +} + +static int __init epca_real_setup(char *str) +{ + int ints[11]; + + epca_setup(get_options(str, 11, ints), ints); + return 1; +} + +__setup("digiepca", epca_real_setup); +#endif + +enum epic_board_types { + brd_xr = 0, + brd_xem, + brd_cx, + brd_xrj, +}; + +/* indexed directly by epic_board_types enum */ +static struct { + unsigned char board_type; + unsigned bar_idx; /* PCI base address region */ +} epca_info_tbl[] = { + { PCIXR, 0, }, + { PCIXEM, 0, }, + { PCICX, 0, }, + { PCIXRJ, 2, }, +}; + +static int __devinit epca_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int board_num = -1; + int board_idx, info_idx = ent->driver_data; + unsigned long addr; + + if (pci_enable_device(pdev)) + return -EIO; + + board_num++; + board_idx = board_num + num_cards; + if (board_idx >= MAXBOARDS) + goto err_out; + + addr = pci_resource_start(pdev, epca_info_tbl[info_idx].bar_idx); + if (!addr) { + printk(KERN_ERR PFX "PCI region #%d not available (size 0)\n", + epca_info_tbl[info_idx].bar_idx); + goto err_out; + } + + boards[board_idx].status = ENABLED; + boards[board_idx].type = epca_info_tbl[info_idx].board_type; + boards[board_idx].numports = 0x0; + boards[board_idx].port = addr + PCI_IO_OFFSET; + boards[board_idx].membase = addr; + + if (!request_mem_region(addr + PCI_IO_OFFSET, 0x200000, "epca")) { + printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", + 0x200000, addr + PCI_IO_OFFSET); + goto err_out; + } + + boards[board_idx].re_map_port = ioremap_nocache(addr + PCI_IO_OFFSET, + 0x200000); + if (!boards[board_idx].re_map_port) { + printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", + 0x200000, addr + PCI_IO_OFFSET); + goto err_out_free_pciio; + } + + if (!request_mem_region(addr, 0x200000, "epca")) { + printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", + 0x200000, addr); + goto err_out_free_iounmap; + } + + boards[board_idx].re_map_membase = ioremap_nocache(addr, 0x200000); + if (!boards[board_idx].re_map_membase) { + printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", + 0x200000, addr + PCI_IO_OFFSET); + goto err_out_free_memregion; + } + + /* + * I don't know what the below does, but the hardware guys say its + * required on everything except PLX (In this case XRJ). + */ + if (info_idx != brd_xrj) { + pci_write_config_byte(pdev, 0x40, 0); + pci_write_config_byte(pdev, 0x46, 0); + } + + return 0; + +err_out_free_memregion: + release_mem_region(addr, 0x200000); +err_out_free_iounmap: + iounmap(boards[board_idx].re_map_port); +err_out_free_pciio: + release_mem_region(addr + PCI_IO_OFFSET, 0x200000); +err_out: + return -ENODEV; +} + + +static struct pci_device_id epca_pci_tbl[] = { + { PCI_VENDOR_DIGI, PCI_DEVICE_XR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xr }, + { PCI_VENDOR_DIGI, PCI_DEVICE_XEM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xem }, + { PCI_VENDOR_DIGI, PCI_DEVICE_CX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_cx }, + { PCI_VENDOR_DIGI, PCI_DEVICE_XRJ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xrj }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, epca_pci_tbl); + +static int __init init_PCI(void) +{ + memset(&epca_driver, 0, sizeof(epca_driver)); + epca_driver.name = "epca"; + epca_driver.id_table = epca_pci_tbl; + epca_driver.probe = epca_init_one; + + return pci_register_driver(&epca_driver); +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/tty/epca.h b/drivers/staging/tty/epca.h new file mode 100644 index 000000000000..d414bf2dbf7c --- /dev/null +++ b/drivers/staging/tty/epca.h @@ -0,0 +1,158 @@ +#define XEMPORTS 0xC02 +#define XEPORTS 0xC22 + +#define MAX_ALLOC 0x100 + +#define MAXBOARDS 12 +#define FEPCODESEG 0x0200L +#define FEPCODE 0x2000L +#define BIOSCODE 0xf800L + +#define MISCGLOBAL 0x0C00L +#define NPORT 0x0C22L +#define MBOX 0x0C40L +#define PORTBASE 0x0C90L + +/* Begin code defines used for epca_setup */ + +#define INVALID_BOARD_TYPE 0x1 +#define INVALID_NUM_PORTS 0x2 +#define INVALID_MEM_BASE 0x4 +#define INVALID_PORT_BASE 0x8 +#define INVALID_BOARD_STATUS 0x10 +#define INVALID_ALTPIN 0x20 + +/* End code defines used for epca_setup */ + + +#define FEPCLR 0x00 +#define FEPMEM 0x02 +#define FEPRST 0x04 +#define FEPINT 0x08 +#define FEPMASK 0x0e +#define FEPWIN 0x80 + +#define PCXE 0 +#define PCXEVE 1 +#define PCXEM 2 +#define EISAXEM 3 +#define PC64XE 4 +#define PCXI 5 +#define PCIXEM 7 +#define PCICX 8 +#define PCIXR 9 +#define PCIXRJ 10 +#define EPCA_NUM_TYPES 6 + + +static char *board_desc[] = +{ + "PC/Xe", + "PC/Xeve", + "PC/Xem", + "EISA/Xem", + "PC/64Xe", + "PC/Xi", + "unknown", + "PCI/Xem", + "PCI/CX", + "PCI/Xr", + "PCI/Xrj", +}; + +#define STARTC 021 +#define STOPC 023 +#define IAIXON 0x2000 + + +#define TXSTOPPED 0x1 +#define LOWWAIT 0x2 +#define EMPTYWAIT 0x4 +#define RXSTOPPED 0x8 +#define TXBUSY 0x10 + +#define DISABLED 0 +#define ENABLED 1 +#define OFF 0 +#define ON 1 + +#define FEPTIMEOUT 200000 +#define SERIAL_TYPE_INFO 3 +#define EPCA_EVENT_HANGUP 1 +#define EPCA_MAGIC 0x5c6df104L + +struct channel +{ + long magic; + struct tty_port port; + unsigned char boardnum; + unsigned char channelnum; + unsigned char omodem; /* FEP output modem status */ + unsigned char imodem; /* FEP input modem status */ + unsigned char modemfake; /* Modem values to be forced */ + unsigned char modem; /* Force values */ + unsigned char hflow; + unsigned char dsr; + unsigned char dcd; + unsigned char m_rts ; /* The bits used in whatever FEP */ + unsigned char m_dcd ; /* is indiginous to this board to */ + unsigned char m_dsr ; /* represent each of the physical */ + unsigned char m_cts ; /* handshake lines */ + unsigned char m_ri ; + unsigned char m_dtr ; + unsigned char stopc; + unsigned char startc; + unsigned char stopca; + unsigned char startca; + unsigned char fepstopc; + unsigned char fepstartc; + unsigned char fepstopca; + unsigned char fepstartca; + unsigned char txwin; + unsigned char rxwin; + unsigned short fepiflag; + unsigned short fepcflag; + unsigned short fepoflag; + unsigned short txbufhead; + unsigned short txbufsize; + unsigned short rxbufhead; + unsigned short rxbufsize; + int close_delay; + unsigned long event; + uint dev; + unsigned long statusflags; + unsigned long c_iflag; + unsigned long c_cflag; + unsigned long c_lflag; + unsigned long c_oflag; + unsigned char __iomem *txptr; + unsigned char __iomem *rxptr; + struct board_info *board; + struct board_chan __iomem *brdchan; + struct digi_struct digiext; + struct work_struct tqueue; + struct global_data __iomem *mailbox; +}; + +struct board_info +{ + unsigned char status; + unsigned char type; + unsigned char altpin; + unsigned short numports; + unsigned long port; + unsigned long membase; + void __iomem *re_map_port; + void __iomem *re_map_membase; + unsigned long memory_seg; + void ( * memwinon ) (struct board_info *, unsigned int) ; + void ( * memwinoff ) (struct board_info *, unsigned int) ; + void ( * globalwinon ) (struct channel *) ; + void ( * txwinon ) (struct channel *) ; + void ( * rxwinon ) (struct channel *) ; + void ( * memoff ) (struct channel *) ; + void ( * assertgwinon ) (struct channel *) ; + void ( * assertmemoff ) (struct channel *) ; + unsigned char poller_inhibited ; +}; + diff --git a/drivers/staging/tty/epcaconfig.h b/drivers/staging/tty/epcaconfig.h new file mode 100644 index 000000000000..55dec067078e --- /dev/null +++ b/drivers/staging/tty/epcaconfig.h @@ -0,0 +1,7 @@ +#define NUMCARDS 0 +#define NBDEVS 0 + +struct board_info static_boards[NUMCARDS]={ +}; + +/* DO NOT HAND EDIT THIS FILE! */ diff --git a/drivers/staging/tty/ip2/Makefile b/drivers/staging/tty/ip2/Makefile new file mode 100644 index 000000000000..7b78e0dfc5b0 --- /dev/null +++ b/drivers/staging/tty/ip2/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Computone IntelliPort Plus Driver +# + +obj-$(CONFIG_COMPUTONE) += ip2.o + +ip2-y := ip2main.o + diff --git a/drivers/staging/tty/ip2/i2cmd.c b/drivers/staging/tty/ip2/i2cmd.c new file mode 100644 index 000000000000..e7af647800b6 --- /dev/null +++ b/drivers/staging/tty/ip2/i2cmd.c @@ -0,0 +1,210 @@ +/******************************************************************************* +* +* (c) 1998 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Definition table for In-line and Bypass commands. Applicable +* only when the standard loadware is active. (This is included +* source code, not a separate compilation module.) +* +*******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Revision History: +// +// 10 October 1991 MAG First Draft +// 7 November 1991 MAG Reflects additional commands. +// 24 February 1992 MAG Additional commands for 1.4.x loadware +// 11 March 1992 MAG Additional commands +// 30 March 1992 MAG Additional command: CMD_DSS_NOW +// 18 May 1992 MAG Discovered commands 39 & 40 must be at the end of a +// packet: affects implementation. +//------------------------------------------------------------------------------ + +//************ +//* Includes * +//************ + +#include "i2cmd.h" /* To get some bit-defines */ + +//------------------------------------------------------------------------------ +// Here is the table of global arrays which represent each type of command +// supported in the IntelliPort standard loadware. See also i2cmd.h +// for a more complete explanation of what is going on. +//------------------------------------------------------------------------------ + +// Here are the various globals: note that the names are not used except through +// the macros defined in i2cmd.h. Also note that although they are character +// arrays here (for extendability) they are cast to structure pointers in the +// i2cmd.h macros. See i2cmd.h for flags definitions. + +// Length Flags Command +static UCHAR ct02[] = { 1, BTH, 0x02 }; // DTR UP +static UCHAR ct03[] = { 1, BTH, 0x03 }; // DTR DN +static UCHAR ct04[] = { 1, BTH, 0x04 }; // RTS UP +static UCHAR ct05[] = { 1, BTH, 0x05 }; // RTS DN +static UCHAR ct06[] = { 1, BYP, 0x06 }; // START FL +static UCHAR ct07[] = { 2, BTH, 0x07,0 }; // BAUD +static UCHAR ct08[] = { 2, BTH, 0x08,0 }; // BITS +static UCHAR ct09[] = { 2, BTH, 0x09,0 }; // STOP +static UCHAR ct10[] = { 2, BTH, 0x0A,0 }; // PARITY +static UCHAR ct11[] = { 2, BTH, 0x0B,0 }; // XON +static UCHAR ct12[] = { 2, BTH, 0x0C,0 }; // XOFF +static UCHAR ct13[] = { 1, BTH, 0x0D }; // STOP FL +static UCHAR ct14[] = { 1, BYP|VIP, 0x0E }; // ACK HOTK +//static UCHAR ct15[]={ 2, BTH|VIP, 0x0F,0 }; // IRQ SET +static UCHAR ct16[] = { 2, INL, 0x10,0 }; // IXONOPTS +static UCHAR ct17[] = { 2, INL, 0x11,0 }; // OXONOPTS +static UCHAR ct18[] = { 1, INL, 0x12 }; // CTSENAB +static UCHAR ct19[] = { 1, BTH, 0x13 }; // CTSDSAB +static UCHAR ct20[] = { 1, INL, 0x14 }; // DCDENAB +static UCHAR ct21[] = { 1, BTH, 0x15 }; // DCDDSAB +static UCHAR ct22[] = { 1, BTH, 0x16 }; // DSRENAB +static UCHAR ct23[] = { 1, BTH, 0x17 }; // DSRDSAB +static UCHAR ct24[] = { 1, BTH, 0x18 }; // RIENAB +static UCHAR ct25[] = { 1, BTH, 0x19 }; // RIDSAB +static UCHAR ct26[] = { 2, BTH, 0x1A,0 }; // BRKENAB +static UCHAR ct27[] = { 1, BTH, 0x1B }; // BRKDSAB +//static UCHAR ct28[]={ 2, BTH, 0x1C,0 }; // MAXBLOKSIZE +//static UCHAR ct29[]={ 2, 0, 0x1D,0 }; // reserved +static UCHAR ct30[] = { 1, INL, 0x1E }; // CTSFLOWENAB +static UCHAR ct31[] = { 1, INL, 0x1F }; // CTSFLOWDSAB +static UCHAR ct32[] = { 1, INL, 0x20 }; // RTSFLOWENAB +static UCHAR ct33[] = { 1, INL, 0x21 }; // RTSFLOWDSAB +static UCHAR ct34[] = { 2, BTH, 0x22,0 }; // ISTRIPMODE +static UCHAR ct35[] = { 2, BTH|END, 0x23,0 }; // SENDBREAK +static UCHAR ct36[] = { 2, BTH, 0x24,0 }; // SETERRMODE +//static UCHAR ct36a[]={ 3, INL, 0x24,0,0 }; // SET_REPLACE + +// The following is listed for completeness, but should never be sent directly +// by user-level code. It is sent only by library routines in response to data +// movement. +//static UCHAR ct37[]={ 5, BYP|VIP, 0x25,0,0,0,0 }; // FLOW PACKET + +// Back to normal +//static UCHAR ct38[] = {11, BTH|VAR, 0x26,0,0,0,0,0,0,0,0,0,0 }; // DEF KEY SEQ +//static UCHAR ct39[]={ 3, BTH|END, 0x27,0,0 }; // OPOSTON +//static UCHAR ct40[]={ 1, BTH|END, 0x28 }; // OPOSTOFF +static UCHAR ct41[] = { 1, BYP, 0x29 }; // RESUME +//static UCHAR ct42[]={ 2, BTH, 0x2A,0 }; // TXBAUD +//static UCHAR ct43[]={ 2, BTH, 0x2B,0 }; // RXBAUD +//static UCHAR ct44[]={ 2, BTH, 0x2C,0 }; // MS PING +//static UCHAR ct45[]={ 1, BTH, 0x2D }; // HOTENAB +//static UCHAR ct46[]={ 1, BTH, 0x2E }; // HOTDSAB +//static UCHAR ct47[]={ 7, BTH, 0x2F,0,0,0,0,0,0 }; // UNIX FLAGS +//static UCHAR ct48[]={ 1, BTH, 0x30 }; // DSRFLOWENAB +//static UCHAR ct49[]={ 1, BTH, 0x31 }; // DSRFLOWDSAB +//static UCHAR ct50[]={ 1, BTH, 0x32 }; // DTRFLOWENAB +//static UCHAR ct51[]={ 1, BTH, 0x33 }; // DTRFLOWDSAB +//static UCHAR ct52[]={ 1, BTH, 0x34 }; // BAUDTABRESET +//static UCHAR ct53[] = { 3, BTH, 0x35,0,0 }; // BAUDREMAP +static UCHAR ct54[] = { 3, BTH, 0x36,0,0 }; // CUSTOMBAUD1 +static UCHAR ct55[] = { 3, BTH, 0x37,0,0 }; // CUSTOMBAUD2 +static UCHAR ct56[] = { 2, BTH|END, 0x38,0 }; // PAUSE +static UCHAR ct57[] = { 1, BYP, 0x39 }; // SUSPEND +static UCHAR ct58[] = { 1, BYP, 0x3A }; // UNSUSPEND +static UCHAR ct59[] = { 2, BTH, 0x3B,0 }; // PARITYCHK +static UCHAR ct60[] = { 1, INL|VIP, 0x3C }; // BOOKMARKREQ +//static UCHAR ct61[]={ 2, BTH, 0x3D,0 }; // INTERNALLOOP +//static UCHAR ct62[]={ 2, BTH, 0x3E,0 }; // HOTKTIMEOUT +static UCHAR ct63[] = { 2, INL, 0x3F,0 }; // SETTXON +static UCHAR ct64[] = { 2, INL, 0x40,0 }; // SETTXOFF +//static UCHAR ct65[]={ 2, BTH, 0x41,0 }; // SETAUTORTS +//static UCHAR ct66[]={ 2, BTH, 0x42,0 }; // SETHIGHWAT +//static UCHAR ct67[]={ 2, BYP, 0x43,0 }; // STARTSELFL +//static UCHAR ct68[]={ 2, INL, 0x44,0 }; // ENDSELFL +//static UCHAR ct69[]={ 1, BYP, 0x45 }; // HWFLOW_OFF +//static UCHAR ct70[]={ 1, BTH, 0x46 }; // ODSRFL_ENAB +//static UCHAR ct71[]={ 1, BTH, 0x47 }; // ODSRFL_DSAB +//static UCHAR ct72[]={ 1, BTH, 0x48 }; // ODCDFL_ENAB +//static UCHAR ct73[]={ 1, BTH, 0x49 }; // ODCDFL_DSAB +//static UCHAR ct74[]={ 2, BTH, 0x4A,0 }; // LOADLEVEL +//static UCHAR ct75[]={ 2, BTH, 0x4B,0 }; // STATDATA +//static UCHAR ct76[]={ 1, BYP, 0x4C }; // BREAK_ON +//static UCHAR ct77[]={ 1, BYP, 0x4D }; // BREAK_OFF +//static UCHAR ct78[]={ 1, BYP, 0x4E }; // GETFC +static UCHAR ct79[] = { 2, BYP, 0x4F,0 }; // XMIT_NOW +//static UCHAR ct80[]={ 4, BTH, 0x50,0,0,0 }; // DIVISOR_LATCH +//static UCHAR ct81[]={ 1, BYP, 0x51 }; // GET_STATUS +//static UCHAR ct82[]={ 1, BYP, 0x52 }; // GET_TXCNT +//static UCHAR ct83[]={ 1, BYP, 0x53 }; // GET_RXCNT +//static UCHAR ct84[]={ 1, BYP, 0x54 }; // GET_BOXIDS +//static UCHAR ct85[]={10, BYP, 0x55,0,0,0,0,0,0,0,0,0 }; // ENAB_MULT +//static UCHAR ct86[]={ 2, BTH, 0x56,0 }; // RCV_ENABLE +static UCHAR ct87[] = { 1, BYP, 0x57 }; // HW_TEST +//static UCHAR ct88[]={ 3, BTH, 0x58,0,0 }; // RCV_THRESHOLD +//static UCHAR ct90[]={ 3, BYP, 0x5A,0,0 }; // Set SILO +//static UCHAR ct91[]={ 2, BYP, 0x5B,0 }; // timed break + +// Some composite commands as well +//static UCHAR cc01[]={ 2, BTH, 0x02,0x04 }; // DTR & RTS UP +//static UCHAR cc02[]={ 2, BTH, 0x03,0x05 }; // DTR & RTS DN + +//******** +//* Code * +//******** + +//****************************************************************************** +// Function: i2cmdUnixFlags(iflag, cflag, lflag) +// Parameters: Unix tty flags +// +// Returns: Pointer to command structure +// +// Description: +// +// This routine sets the parameters of command 47 and returns a pointer to the +// appropriate structure. +//****************************************************************************** +#if 0 +cmdSyntaxPtr +i2cmdUnixFlags(unsigned short iflag,unsigned short cflag,unsigned short lflag) +{ + cmdSyntaxPtr pCM = (cmdSyntaxPtr) ct47; + + pCM->cmd[1] = (unsigned char) iflag; + pCM->cmd[2] = (unsigned char) (iflag >> 8); + pCM->cmd[3] = (unsigned char) cflag; + pCM->cmd[4] = (unsigned char) (cflag >> 8); + pCM->cmd[5] = (unsigned char) lflag; + pCM->cmd[6] = (unsigned char) (lflag >> 8); + return pCM; +} +#endif /* 0 */ + +//****************************************************************************** +// Function: i2cmdBaudDef(which, rate) +// Parameters: ? +// +// Returns: Pointer to command structure +// +// Description: +// +// This routine sets the parameters of commands 54 or 55 (according to the +// argument which), and returns a pointer to the appropriate structure. +//****************************************************************************** +static cmdSyntaxPtr +i2cmdBaudDef(int which, unsigned short rate) +{ + cmdSyntaxPtr pCM; + + switch(which) + { + case 1: + pCM = (cmdSyntaxPtr) ct54; + break; + default: + case 2: + pCM = (cmdSyntaxPtr) ct55; + break; + } + pCM->cmd[1] = (unsigned char) rate; + pCM->cmd[2] = (unsigned char) (rate >> 8); + return pCM; +} + diff --git a/drivers/staging/tty/ip2/i2cmd.h b/drivers/staging/tty/ip2/i2cmd.h new file mode 100644 index 000000000000..29277ec6b8ed --- /dev/null +++ b/drivers/staging/tty/ip2/i2cmd.h @@ -0,0 +1,630 @@ +/******************************************************************************* +* +* (c) 1999 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Definitions and support for In-line and Bypass commands. +* Applicable only when the standard loadware is active. +* +*******************************************************************************/ +//------------------------------------------------------------------------------ +// Revision History: +// +// 10 October 1991 MAG First Draft +// 7 November 1991 MAG Reflects some new commands +// 20 February 1992 MAG CMD_HOTACK corrected: no argument. +// 24 February 1992 MAG Support added for new commands for 1.4.x loadware. +// 11 March 1992 MAG Additional commands. +// 16 March 1992 MAG Additional commands. +// 30 March 1992 MAG Additional command: CMD_DSS_NOW +// 18 May 1992 MAG Changed CMD_OPOST +// +//------------------------------------------------------------------------------ +#ifndef I2CMD_H // To prevent multiple includes +#define I2CMD_H 1 + +#include "ip2types.h" + +// This module is designed to provide a uniform method of sending commands to +// the board through command packets. The difficulty is, some commands take +// parameters, others do not. Furthermore, it is often useful to send several +// commands to the same channel as part of the same packet. (See also i2pack.h.) +// +// This module is designed so that the caller should not be responsible for +// remembering the exact syntax of each command, or at least so that the +// compiler could check things somewhat. I'll explain as we go... +// +// First, a structure which can embody the syntax of each type of command. +// +typedef struct _cmdSyntax +{ + UCHAR length; // Number of bytes in the command + UCHAR flags; // Information about the command (see below) + + // The command and its parameters, which may be of arbitrary length. Don't + // worry yet how the parameters will be initialized; macros later take care + // of it. Also, don't worry about the arbitrary length issue; this structure + // is never used to allocate space (see i2cmd.c). + UCHAR cmd[2]; +} cmdSyntax, *cmdSyntaxPtr; + +// Bit assignments for flags + +#define INL 1 // Set if suitable for inline commands +#define BYP 2 // Set if suitable for bypass commands +#define BTH (INL|BYP) // suitable for either! +#define END 4 // Set if this must be the last command in a block +#define VIP 8 // Set if this command is special in some way and really + // should only be sent from the library-level and not + // directly from user-level +#define VAR 0x10 // This command is of variable length! + +// Declarations for the global arrays used to bear the commands and their +// arguments. +// +// Note: Since these are globals and the arguments might change, it is important +// that the library routine COPY these into buffers from whence they would be +// sent, rather than merely storing the pointers. In multi-threaded +// environments, important that the copy should obtain before any context switch +// is allowed. Also, for parameterized commands, DO NOT ISSUE THE SAME COMMAND +// MORE THAN ONCE WITH THE SAME PARAMETERS in the same call. +// +static UCHAR ct02[]; +static UCHAR ct03[]; +static UCHAR ct04[]; +static UCHAR ct05[]; +static UCHAR ct06[]; +static UCHAR ct07[]; +static UCHAR ct08[]; +static UCHAR ct09[]; +static UCHAR ct10[]; +static UCHAR ct11[]; +static UCHAR ct12[]; +static UCHAR ct13[]; +static UCHAR ct14[]; +static UCHAR ct15[]; +static UCHAR ct16[]; +static UCHAR ct17[]; +static UCHAR ct18[]; +static UCHAR ct19[]; +static UCHAR ct20[]; +static UCHAR ct21[]; +static UCHAR ct22[]; +static UCHAR ct23[]; +static UCHAR ct24[]; +static UCHAR ct25[]; +static UCHAR ct26[]; +static UCHAR ct27[]; +static UCHAR ct28[]; +static UCHAR ct29[]; +static UCHAR ct30[]; +static UCHAR ct31[]; +static UCHAR ct32[]; +static UCHAR ct33[]; +static UCHAR ct34[]; +static UCHAR ct35[]; +static UCHAR ct36[]; +static UCHAR ct36a[]; +static UCHAR ct41[]; +static UCHAR ct42[]; +static UCHAR ct43[]; +static UCHAR ct44[]; +static UCHAR ct45[]; +static UCHAR ct46[]; +static UCHAR ct48[]; +static UCHAR ct49[]; +static UCHAR ct50[]; +static UCHAR ct51[]; +static UCHAR ct52[]; +static UCHAR ct56[]; +static UCHAR ct57[]; +static UCHAR ct58[]; +static UCHAR ct59[]; +static UCHAR ct60[]; +static UCHAR ct61[]; +static UCHAR ct62[]; +static UCHAR ct63[]; +static UCHAR ct64[]; +static UCHAR ct65[]; +static UCHAR ct66[]; +static UCHAR ct67[]; +static UCHAR ct68[]; +static UCHAR ct69[]; +static UCHAR ct70[]; +static UCHAR ct71[]; +static UCHAR ct72[]; +static UCHAR ct73[]; +static UCHAR ct74[]; +static UCHAR ct75[]; +static UCHAR ct76[]; +static UCHAR ct77[]; +static UCHAR ct78[]; +static UCHAR ct79[]; +static UCHAR ct80[]; +static UCHAR ct81[]; +static UCHAR ct82[]; +static UCHAR ct83[]; +static UCHAR ct84[]; +static UCHAR ct85[]; +static UCHAR ct86[]; +static UCHAR ct87[]; +static UCHAR ct88[]; +static UCHAR ct89[]; +static UCHAR ct90[]; +static UCHAR ct91[]; +static UCHAR cc01[]; +static UCHAR cc02[]; + +// Now, refer to i2cmd.c, and see the character arrays defined there. They are +// cast here to cmdSyntaxPtr. +// +// There are library functions for issuing bypass or inline commands. These +// functions take one or more arguments of the type cmdSyntaxPtr. The routine +// then can figure out how long each command is supposed to be and easily add it +// to the list. +// +// For ease of use, we define manifests which return pointers to appropriate +// cmdSyntaxPtr things. But some commands also take arguments. If a single +// argument is used, we define a macro which performs the single assignment and +// (through the expedient of a comma expression) references the appropriate +// pointer. For commands requiring several arguments, we actually define a +// function to perform the assignments. + +#define CMD_DTRUP (cmdSyntaxPtr)(ct02) // Raise DTR +#define CMD_DTRDN (cmdSyntaxPtr)(ct03) // Lower DTR +#define CMD_RTSUP (cmdSyntaxPtr)(ct04) // Raise RTS +#define CMD_RTSDN (cmdSyntaxPtr)(ct05) // Lower RTS +#define CMD_STARTFL (cmdSyntaxPtr)(ct06) // Start Flushing Data + +#define CMD_DTRRTS_UP (cmdSyntaxPtr)(cc01) // Raise DTR and RTS +#define CMD_DTRRTS_DN (cmdSyntaxPtr)(cc02) // Lower DTR and RTS + +// Set Baud Rate for transmit and receive +#define CMD_SETBAUD(arg) \ + (((cmdSyntaxPtr)(ct07))->cmd[1] = (arg),(cmdSyntaxPtr)(ct07)) + +#define CBR_50 1 +#define CBR_75 2 +#define CBR_110 3 +#define CBR_134 4 +#define CBR_150 5 +#define CBR_200 6 +#define CBR_300 7 +#define CBR_600 8 +#define CBR_1200 9 +#define CBR_1800 10 +#define CBR_2400 11 +#define CBR_4800 12 +#define CBR_9600 13 +#define CBR_19200 14 +#define CBR_38400 15 +#define CBR_2000 16 +#define CBR_3600 17 +#define CBR_7200 18 +#define CBR_56000 19 +#define CBR_57600 20 +#define CBR_64000 21 +#define CBR_76800 22 +#define CBR_115200 23 +#define CBR_C1 24 // Custom baud rate 1 +#define CBR_C2 25 // Custom baud rate 2 +#define CBR_153600 26 +#define CBR_230400 27 +#define CBR_307200 28 +#define CBR_460800 29 +#define CBR_921600 30 + +// Set Character size +// +#define CMD_SETBITS(arg) \ + (((cmdSyntaxPtr)(ct08))->cmd[1] = (arg),(cmdSyntaxPtr)(ct08)) + +#define CSZ_5 0 +#define CSZ_6 1 +#define CSZ_7 2 +#define CSZ_8 3 + +// Set number of stop bits +// +#define CMD_SETSTOP(arg) \ + (((cmdSyntaxPtr)(ct09))->cmd[1] = (arg),(cmdSyntaxPtr)(ct09)) + +#define CST_1 0 +#define CST_15 1 // 1.5 stop bits +#define CST_2 2 + +// Set parity option +// +#define CMD_SETPAR(arg) \ + (((cmdSyntaxPtr)(ct10))->cmd[1] = (arg),(cmdSyntaxPtr)(ct10)) + +#define CSP_NP 0 // no parity +#define CSP_OD 1 // odd parity +#define CSP_EV 2 // Even parity +#define CSP_SP 3 // Space parity +#define CSP_MK 4 // Mark parity + +// Define xon char for transmitter flow control +// +#define CMD_DEF_IXON(arg) \ + (((cmdSyntaxPtr)(ct11))->cmd[1] = (arg),(cmdSyntaxPtr)(ct11)) + +// Define xoff char for transmitter flow control +// +#define CMD_DEF_IXOFF(arg) \ + (((cmdSyntaxPtr)(ct12))->cmd[1] = (arg),(cmdSyntaxPtr)(ct12)) + +#define CMD_STOPFL (cmdSyntaxPtr)(ct13) // Stop Flushing data + +// Acknowledge receipt of hotkey signal +// +#define CMD_HOTACK (cmdSyntaxPtr)(ct14) + +// Define irq level to use. Should actually be sent by library-level code, not +// directly from user... +// +#define CMDVALUE_IRQ 15 // For library use at initialization. Until this command + // is sent, board processing doesn't really start. +#define CMD_SET_IRQ(arg) \ + (((cmdSyntaxPtr)(ct15))->cmd[1] = (arg),(cmdSyntaxPtr)(ct15)) + +#define CIR_POLL 0 // No IRQ - Poll +#define CIR_3 3 // IRQ 3 +#define CIR_4 4 // IRQ 4 +#define CIR_5 5 // IRQ 5 +#define CIR_7 7 // IRQ 7 +#define CIR_10 10 // IRQ 10 +#define CIR_11 11 // IRQ 11 +#define CIR_12 12 // IRQ 12 +#define CIR_15 15 // IRQ 15 + +// Select transmit flow xon/xoff options +// +#define CMD_IXON_OPT(arg) \ + (((cmdSyntaxPtr)(ct16))->cmd[1] = (arg),(cmdSyntaxPtr)(ct16)) + +#define CIX_NONE 0 // Incoming Xon/Xoff characters not special +#define CIX_XON 1 // Xoff disable, Xon enable +#define CIX_XANY 2 // Xoff disable, any key enable + +// Select receive flow xon/xoff options +// +#define CMD_OXON_OPT(arg) \ + (((cmdSyntaxPtr)(ct17))->cmd[1] = (arg),(cmdSyntaxPtr)(ct17)) + +#define COX_NONE 0 // Don't send Xon/Xoff +#define COX_XON 1 // Send xon/xoff to start/stop incoming data + + +#define CMD_CTS_REP (cmdSyntaxPtr)(ct18) // Enable CTS reporting +#define CMD_CTS_NREP (cmdSyntaxPtr)(ct19) // Disable CTS reporting + +#define CMD_DCD_REP (cmdSyntaxPtr)(ct20) // Enable DCD reporting +#define CMD_DCD_NREP (cmdSyntaxPtr)(ct21) // Disable DCD reporting + +#define CMD_DSR_REP (cmdSyntaxPtr)(ct22) // Enable DSR reporting +#define CMD_DSR_NREP (cmdSyntaxPtr)(ct23) // Disable DSR reporting + +#define CMD_RI_REP (cmdSyntaxPtr)(ct24) // Enable RI reporting +#define CMD_RI_NREP (cmdSyntaxPtr)(ct25) // Disable RI reporting + +// Enable break reporting and select style +// +#define CMD_BRK_REP(arg) \ + (((cmdSyntaxPtr)(ct26))->cmd[1] = (arg),(cmdSyntaxPtr)(ct26)) + +#define CBK_STAT 0x00 // Report breaks as a status (exception,irq) +#define CBK_NULL 0x01 // Report breaks as a good null +#define CBK_STAT_SEQ 0x02 // Report breaks as a status AND as in-band character + // sequence FFh, 01h, 10h +#define CBK_SEQ 0x03 // Report breaks as the in-band + //sequence FFh, 01h, 10h ONLY. +#define CBK_FLSH 0x04 // if this bit set also flush input data +#define CBK_POSIX 0x08 // if this bit set report as FF,0,0 sequence +#define CBK_SINGLE 0x10 // if this bit set with CBK_SEQ or CBK_STAT_SEQ + //then reports single null instead of triple + +#define CMD_BRK_NREP (cmdSyntaxPtr)(ct27) // Disable break reporting + +// Specify maximum block size for received data +// +#define CMD_MAX_BLOCK(arg) \ + (((cmdSyntaxPtr)(ct28))->cmd[1] = (arg),(cmdSyntaxPtr)(ct28)) + +// -- COMMAND 29 is reserved -- + +#define CMD_CTSFL_ENAB (cmdSyntaxPtr)(ct30) // Enable CTS flow control +#define CMD_CTSFL_DSAB (cmdSyntaxPtr)(ct31) // Disable CTS flow control +#define CMD_RTSFL_ENAB (cmdSyntaxPtr)(ct32) // Enable RTS flow control +#define CMD_RTSFL_DSAB (cmdSyntaxPtr)(ct33) // Disable RTS flow control + +// Specify istrip option +// +#define CMD_ISTRIP_OPT(arg) \ + (((cmdSyntaxPtr)(ct34))->cmd[1] = (arg),(cmdSyntaxPtr)(ct34)) + +#define CIS_NOSTRIP 0 // Strip characters to character size +#define CIS_STRIP 1 // Strip any 8-bit characters to 7 bits + +// Send a break of arg milliseconds +// +#define CMD_SEND_BRK(arg) \ + (((cmdSyntaxPtr)(ct35))->cmd[1] = (arg),(cmdSyntaxPtr)(ct35)) + +// Set error reporting mode +// +#define CMD_SET_ERROR(arg) \ + (((cmdSyntaxPtr)(ct36))->cmd[1] = (arg),(cmdSyntaxPtr)(ct36)) + +#define CSE_ESTAT 0 // Report error in a status packet +#define CSE_NOREP 1 // Treat character as though it were good +#define CSE_DROP 2 // Discard the character +#define CSE_NULL 3 // Replace with a null +#define CSE_MARK 4 // Replace with a 3-character sequence (as Unix) + +#define CSE_REPLACE 0x8 // Replace the errored character with the + // replacement character defined here + +#define CSE_STAT_REPLACE 0x18 // Replace the errored character with the + // replacement character defined here AND + // report the error as a status packet (as in + // CSE_ESTAT). + + +// COMMAND 37, to send flow control packets, is handled only by low-level +// library code in response to data movement and shouldn't ever be sent by the +// user code. See i2pack.h and the body of i2lib.c for details. + +// Enable on-board post-processing, using options given in oflag argument. +// Formerly, this command was automatically preceded by a CMD_OPOST_OFF command +// because the loadware does not permit sending back-to-back CMD_OPOST_ON +// commands without an intervening CMD_OPOST_OFF. BUT, WE LEARN 18 MAY 92, that +// CMD_OPOST_ON and CMD_OPOST_OFF must each be at the end of a packet (or in a +// solo packet). This means the caller must specify separately CMD_OPOST_OFF, +// CMD_OPOST_ON(parm) when he calls i2QueueCommands(). That function will ensure +// each gets a separate packet. Extra CMD_OPOST_OFF's are always ok. +// +#define CMD_OPOST_ON(oflag) \ + (*(USHORT *)(((cmdSyntaxPtr)(ct39))->cmd[1]) = (oflag), \ + (cmdSyntaxPtr)(ct39)) + +#define CMD_OPOST_OFF (cmdSyntaxPtr)(ct40) // Disable on-board post-proc + +#define CMD_RESUME (cmdSyntaxPtr)(ct41) // Resume: behave as though an XON + // were received; + +// Set Transmit baud rate (see command 7 for arguments) +// +#define CMD_SETBAUD_TX(arg) \ + (((cmdSyntaxPtr)(ct42))->cmd[1] = (arg),(cmdSyntaxPtr)(ct42)) + +// Set Receive baud rate (see command 7 for arguments) +// +#define CMD_SETBAUD_RX(arg) \ + (((cmdSyntaxPtr)(ct43))->cmd[1] = (arg),(cmdSyntaxPtr)(ct43)) + +// Request interrupt from board each arg milliseconds. Interrupt will specify +// "received data", even though there may be no data present. If arg == 0, +// disables any such interrupts. +// +#define CMD_PING_REQ(arg) \ + (((cmdSyntaxPtr)(ct44))->cmd[1] = (arg),(cmdSyntaxPtr)(ct44)) + +#define CMD_HOT_ENAB (cmdSyntaxPtr)(ct45) // Enable Hot-key checking +#define CMD_HOT_DSAB (cmdSyntaxPtr)(ct46) // Disable Hot-key checking + +#if 0 +// COMMAND 47: Send Protocol info via Unix flags: +// iflag = Unix tty t_iflag +// cflag = Unix tty t_cflag +// lflag = Unix tty t_lflag +// See System V Unix/Xenix documentation for the meanings of the bit fields +// within these flags +// +#define CMD_UNIX_FLAGS(iflag,cflag,lflag) i2cmdUnixFlags(iflag,cflag,lflag) +#endif /* 0 */ + +#define CMD_DSRFL_ENAB (cmdSyntaxPtr)(ct48) // Enable DSR receiver ctrl +#define CMD_DSRFL_DSAB (cmdSyntaxPtr)(ct49) // Disable DSR receiver ctrl +#define CMD_DTRFL_ENAB (cmdSyntaxPtr)(ct50) // Enable DTR flow control +#define CMD_DTRFL_DSAB (cmdSyntaxPtr)(ct51) // Disable DTR flow control +#define CMD_BAUD_RESET (cmdSyntaxPtr)(ct52) // Reset baudrate table + +// COMMAND 54: Define custom rate #1 +// rate = (short) 1/10 of the desired baud rate +// +#define CMD_BAUD_DEF1(rate) i2cmdBaudDef(1,rate) + +// COMMAND 55: Define custom rate #2 +// rate = (short) 1/10 of the desired baud rate +// +#define CMD_BAUD_DEF2(rate) i2cmdBaudDef(2,rate) + +// Pause arg hundredths of seconds. (Note, this is NOT milliseconds.) +// +#define CMD_PAUSE(arg) \ + (((cmdSyntaxPtr)(ct56))->cmd[1] = (arg),(cmdSyntaxPtr)(ct56)) + +#define CMD_SUSPEND (cmdSyntaxPtr)(ct57) // Suspend output +#define CMD_UNSUSPEND (cmdSyntaxPtr)(ct58) // Un-Suspend output + +// Set parity-checking options +// +#define CMD_PARCHK(arg) \ + (((cmdSyntaxPtr)(ct59))->cmd[1] = (arg),(cmdSyntaxPtr)(ct59)) + +#define CPK_ENAB 0 // Enable parity checking on input +#define CPK_DSAB 1 // Disable parity checking on input + +#define CMD_BMARK_REQ (cmdSyntaxPtr)(ct60) // Bookmark request + + +// Enable/Disable internal loopback mode +// +#define CMD_INLOOP(arg) \ + (((cmdSyntaxPtr)(ct61))->cmd[1] = (arg),(cmdSyntaxPtr)(ct61)) + +#define CIN_DISABLE 0 // Normal operation (default) +#define CIN_ENABLE 1 // Internal (local) loopback +#define CIN_REMOTE 2 // Remote loopback + +// Specify timeout for hotkeys: Delay will be (arg x 10) milliseconds, arg == 0 +// --> no timeout: wait forever. +// +#define CMD_HOT_TIME(arg) \ + (((cmdSyntaxPtr)(ct62))->cmd[1] = (arg),(cmdSyntaxPtr)(ct62)) + + +// Define (outgoing) xon for receive flow control +// +#define CMD_DEF_OXON(arg) \ + (((cmdSyntaxPtr)(ct63))->cmd[1] = (arg),(cmdSyntaxPtr)(ct63)) + +// Define (outgoing) xoff for receiver flow control +// +#define CMD_DEF_OXOFF(arg) \ + (((cmdSyntaxPtr)(ct64))->cmd[1] = (arg),(cmdSyntaxPtr)(ct64)) + +// Enable/Disable RTS on transmit (1/2 duplex-style) +// +#define CMD_RTS_XMIT(arg) \ + (((cmdSyntaxPtr)(ct65))->cmd[1] = (arg),(cmdSyntaxPtr)(ct65)) + +#define CHD_DISABLE 0 +#define CHD_ENABLE 1 + +// Set high-water-mark level (debugging use only) +// +#define CMD_SETHIGHWAT(arg) \ + (((cmdSyntaxPtr)(ct66))->cmd[1] = (arg),(cmdSyntaxPtr)(ct66)) + +// Start flushing tagged data (tag = 0-14) +// +#define CMD_START_SELFL(tag) \ + (((cmdSyntaxPtr)(ct67))->cmd[1] = (tag),(cmdSyntaxPtr)(ct67)) + +// End flushing tagged data (tag = 0-14) +// +#define CMD_END_SELFL(tag) \ + (((cmdSyntaxPtr)(ct68))->cmd[1] = (tag),(cmdSyntaxPtr)(ct68)) + +#define CMD_HWFLOW_OFF (cmdSyntaxPtr)(ct69) // Disable HW TX flow control +#define CMD_ODSRFL_ENAB (cmdSyntaxPtr)(ct70) // Enable DSR output f/c +#define CMD_ODSRFL_DSAB (cmdSyntaxPtr)(ct71) // Disable DSR output f/c +#define CMD_ODCDFL_ENAB (cmdSyntaxPtr)(ct72) // Enable DCD output f/c +#define CMD_ODCDFL_DSAB (cmdSyntaxPtr)(ct73) // Disable DCD output f/c + +// Set transmit interrupt load level. Count should be an even value 2-12 +// +#define CMD_LOADLEVEL(count) \ + (((cmdSyntaxPtr)(ct74))->cmd[1] = (count),(cmdSyntaxPtr)(ct74)) + +// If reporting DSS changes, map to character sequence FFh, 2, MSR +// +#define CMD_STATDATA(arg) \ + (((cmdSyntaxPtr)(ct75))->cmd[1] = (arg),(cmdSyntaxPtr)(ct75)) + +#define CSTD_DISABLE// Report DSS changes as status packets only (default) +#define CSTD_ENABLE // Report DSS changes as in-band data sequence as well as + // by status packet. + +#define CMD_BREAK_ON (cmdSyntaxPtr)(ct76)// Set break and stop xmit +#define CMD_BREAK_OFF (cmdSyntaxPtr)(ct77)// End break and restart xmit +#define CMD_GETFC (cmdSyntaxPtr)(ct78)// Request for flow control packet + // from board. + +// Transmit this character immediately +// +#define CMD_XMIT_NOW(ch) \ + (((cmdSyntaxPtr)(ct79))->cmd[1] = (ch),(cmdSyntaxPtr)(ct79)) + +// Set baud rate via "divisor latch" +// +#define CMD_DIVISOR_LATCH(which,value) \ + (((cmdSyntaxPtr)(ct80))->cmd[1] = (which), \ + *(USHORT *)(((cmdSyntaxPtr)(ct80))->cmd[2]) = (value), \ + (cmdSyntaxPtr)(ct80)) + +#define CDL_RX 1 // Set receiver rate +#define CDL_TX 2 // Set transmit rate + // (CDL_TX | CDL_RX) Set both rates + +// Request for special diagnostic status pkt from the board. +// +#define CMD_GET_STATUS (cmdSyntaxPtr)(ct81) + +// Request time-stamped transmit character count packet. +// +#define CMD_GET_TXCNT (cmdSyntaxPtr)(ct82) + +// Request time-stamped receive character count packet. +// +#define CMD_GET_RXCNT (cmdSyntaxPtr)(ct83) + +// Request for box/board I.D. packet. +#define CMD_GET_BOXIDS (cmdSyntaxPtr)(ct84) + +// Enable or disable multiple channels according to bit-mapped ushorts box 1-4 +// +#define CMD_ENAB_MULT(enable, box1, box2, box3, box4) \ + (((cmdSytaxPtr)(ct85))->cmd[1] = (enable), \ + *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[2]) = (box1), \ + *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[4]) = (box2), \ + *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[6]) = (box3), \ + *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[8]) = (box4), \ + (cmdSyntaxPtr)(ct85)) + +#define CEM_DISABLE 0 +#define CEM_ENABLE 1 + +// Enable or disable receiver or receiver interrupts (default both enabled) +// +#define CMD_RCV_ENABLE(ch) \ + (((cmdSyntaxPtr)(ct86))->cmd[1] = (ch),(cmdSyntaxPtr)(ct86)) + +#define CRE_OFF 0 // Disable the receiver +#define CRE_ON 1 // Enable the receiver +#define CRE_INTOFF 2 // Disable receiver interrupts (to loadware) +#define CRE_INTON 3 // Enable receiver interrupts (to loadware) + +// Starts up a hardware test process, which runs transparently, and sends a +// STAT_HWFAIL packet in case a hardware failure is detected. +// +#define CMD_HW_TEST (cmdSyntaxPtr)(ct87) + +// Change receiver threshold and timeout value: +// Defaults: timeout = 20mS +// threshold count = 8 when DTRflow not in use, +// threshold count = 5 when DTRflow in use. +// +#define CMD_RCV_THRESHOLD(count,ms) \ + (((cmdSyntaxPtr)(ct88))->cmd[1] = (count), \ + ((cmdSyntaxPtr)(ct88))->cmd[2] = (ms), \ + (cmdSyntaxPtr)(ct88)) + +// Makes the loadware report DSS signals for this channel immediately. +// +#define CMD_DSS_NOW (cmdSyntaxPtr)(ct89) + +// Set the receive silo parameters +// timeout is ms idle wait until delivery (~VTIME) +// threshold is max characters cause interrupt (~VMIN) +// +#define CMD_SET_SILO(timeout,threshold) \ + (((cmdSyntaxPtr)(ct90))->cmd[1] = (timeout), \ + ((cmdSyntaxPtr)(ct90))->cmd[2] = (threshold), \ + (cmdSyntaxPtr)(ct90)) + +// Set timed break in decisecond (1/10s) +// +#define CMD_LBREAK(ds) \ + (((cmdSyntaxPtr)(ct91))->cmd[1] = (ds),(cmdSyntaxPtr)(ct66)) + + + +#endif // I2CMD_H diff --git a/drivers/staging/tty/ip2/i2ellis.c b/drivers/staging/tty/ip2/i2ellis.c new file mode 100644 index 000000000000..29db44de399f --- /dev/null +++ b/drivers/staging/tty/ip2/i2ellis.c @@ -0,0 +1,1403 @@ +/******************************************************************************* +* +* (c) 1998 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Low-level interface code for the device driver +* (This is included source code, not a separate compilation +* module.) +* +*******************************************************************************/ +//--------------------------------------------- +// Function declarations private to this module +//--------------------------------------------- +// Functions called only indirectly through i2eBordStr entries. + +static int iiWriteBuf16(i2eBordStrPtr, unsigned char *, int); +static int iiWriteBuf8(i2eBordStrPtr, unsigned char *, int); +static int iiReadBuf16(i2eBordStrPtr, unsigned char *, int); +static int iiReadBuf8(i2eBordStrPtr, unsigned char *, int); + +static unsigned short iiReadWord16(i2eBordStrPtr); +static unsigned short iiReadWord8(i2eBordStrPtr); +static void iiWriteWord16(i2eBordStrPtr, unsigned short); +static void iiWriteWord8(i2eBordStrPtr, unsigned short); + +static int iiWaitForTxEmptyII(i2eBordStrPtr, int); +static int iiWaitForTxEmptyIIEX(i2eBordStrPtr, int); +static int iiTxMailEmptyII(i2eBordStrPtr); +static int iiTxMailEmptyIIEX(i2eBordStrPtr); +static int iiTrySendMailII(i2eBordStrPtr, unsigned char); +static int iiTrySendMailIIEX(i2eBordStrPtr, unsigned char); + +static unsigned short iiGetMailII(i2eBordStrPtr); +static unsigned short iiGetMailIIEX(i2eBordStrPtr); + +static void iiEnableMailIrqII(i2eBordStrPtr); +static void iiEnableMailIrqIIEX(i2eBordStrPtr); +static void iiWriteMaskII(i2eBordStrPtr, unsigned char); +static void iiWriteMaskIIEX(i2eBordStrPtr, unsigned char); + +static void ii2Nop(void); + +//*************** +//* Static Data * +//*************** + +static int ii2Safe; // Safe I/O address for delay routine + +static int iiDelayed; // Set when the iiResetDelay function is + // called. Cleared when ANY board is reset. +static DEFINE_RWLOCK(Dl_spinlock); + +//******** +//* Code * +//******** + +//======================================================= +// Initialization Routines +// +// iiSetAddress +// iiReset +// iiResetDelay +// iiInitialize +//======================================================= + +//****************************************************************************** +// Function: iiSetAddress(pB, address, delay) +// Parameters: pB - pointer to the board structure +// address - the purported I/O address of the board +// delay - pointer to the 1-ms delay function to use +// in this and any future operations to this board +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// This routine (roughly) checks for address validity, sets the i2eValid OK and +// sets the state to II_STATE_COLD which means that we haven't even sent a reset +// yet. +// +//****************************************************************************** +static int +iiSetAddress( i2eBordStrPtr pB, int address, delayFunc_t delay ) +{ + // Should any failure occur before init is finished... + pB->i2eValid = I2E_INCOMPLETE; + + // Cannot check upper limit except extremely: Might be microchannel + // Address must be on an 8-byte boundary + + if ((unsigned int)address <= 0x100 + || (unsigned int)address >= 0xfff8 + || (address & 0x7) + ) + { + I2_COMPLETE(pB, I2EE_BADADDR); + } + + // Initialize accelerators + pB->i2eBase = address; + pB->i2eData = address + FIFO_DATA; + pB->i2eStatus = address + FIFO_STATUS; + pB->i2ePointer = address + FIFO_PTR; + pB->i2eXMail = address + FIFO_MAIL; + pB->i2eXMask = address + FIFO_MASK; + + // Initialize i/o address for ii2DelayIO + ii2Safe = address + FIFO_NOP; + + // Initialize the delay routine + pB->i2eDelay = ((delay != (delayFunc_t)NULL) ? delay : (delayFunc_t)ii2Nop); + + pB->i2eValid = I2E_MAGIC; + pB->i2eState = II_STATE_COLD; + + I2_COMPLETE(pB, I2EE_GOOD); +} + +//****************************************************************************** +// Function: iiReset(pB) +// Parameters: pB - pointer to the board structure +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Attempts to reset the board (see also i2hw.h). Normally, we would use this to +// reset a board immediately after iiSetAddress(), but it is valid to reset a +// board from any state, say, in order to change or re-load loadware. (Under +// such circumstances, no reason to re-run iiSetAddress(), which is why it is a +// separate routine and not included in this routine. +// +//****************************************************************************** +static int +iiReset(i2eBordStrPtr pB) +{ + // Magic number should be set, else even the address is suspect + if (pB->i2eValid != I2E_MAGIC) + { + I2_COMPLETE(pB, I2EE_BADMAGIC); + } + + outb(0, pB->i2eBase + FIFO_RESET); /* Any data will do */ + iiDelay(pB, 50); // Pause between resets + outb(0, pB->i2eBase + FIFO_RESET); /* Second reset */ + + // We must wait before even attempting to read anything from the FIFO: the + // board's P.O.S.T may actually attempt to read and write its end of the + // FIFO in order to check flags, loop back (where supported), etc. On + // completion of this testing it would reset the FIFO, and on completion + // of all // P.O.S.T., write the message. We must not mistake data which + // might have been sent for testing as part of the reset message. To + // better utilize time, say, when resetting several boards, we allow the + // delay to be performed externally; in this way the caller can reset + // several boards, delay a single time, then call the initialization + // routine for all. + + pB->i2eState = II_STATE_RESET; + + iiDelayed = 0; // i.e., the delay routine hasn't been called since the most + // recent reset. + + // Ensure anything which would have been of use to standard loadware is + // blanked out, since board has now forgotten everything!. + + pB->i2eUsingIrq = I2_IRQ_UNDEFINED; /* to not use an interrupt so far */ + pB->i2eWaitingForEmptyFifo = 0; + pB->i2eOutMailWaiting = 0; + pB->i2eChannelPtr = NULL; + pB->i2eChannelCnt = 0; + + pB->i2eLeadoffWord[0] = 0; + pB->i2eFifoInInts = 0; + pB->i2eFifoOutInts = 0; + pB->i2eFatalTrap = NULL; + pB->i2eFatal = 0; + + I2_COMPLETE(pB, I2EE_GOOD); +} + +//****************************************************************************** +// Function: iiResetDelay(pB) +// Parameters: pB - pointer to the board structure +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Using the delay defined in board structure, waits two seconds (for board to +// reset). +// +//****************************************************************************** +static int +iiResetDelay(i2eBordStrPtr pB) +{ + if (pB->i2eValid != I2E_MAGIC) { + I2_COMPLETE(pB, I2EE_BADMAGIC); + } + if (pB->i2eState != II_STATE_RESET) { + I2_COMPLETE(pB, I2EE_BADSTATE); + } + iiDelay(pB,2000); /* Now we wait for two seconds. */ + iiDelayed = 1; /* Delay has been called: ok to initialize */ + I2_COMPLETE(pB, I2EE_GOOD); +} + +//****************************************************************************** +// Function: iiInitialize(pB) +// Parameters: pB - pointer to the board structure +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Attempts to read the Power-on reset message. Initializes any remaining fields +// in the pB structure. +// +// This should be called as the third step of a process beginning with +// iiReset(), then iiResetDelay(). This routine checks to see that the structure +// is "valid" and in the reset state, also confirms that the delay routine has +// been called since the latest reset (to any board! overly strong!). +// +//****************************************************************************** +static int +iiInitialize(i2eBordStrPtr pB) +{ + int itemp; + unsigned char c; + unsigned short utemp; + unsigned int ilimit; + + if (pB->i2eValid != I2E_MAGIC) + { + I2_COMPLETE(pB, I2EE_BADMAGIC); + } + + if (pB->i2eState != II_STATE_RESET || !iiDelayed) + { + I2_COMPLETE(pB, I2EE_BADSTATE); + } + + // In case there is a failure short of our completely reading the power-up + // message. + pB->i2eValid = I2E_INCOMPLETE; + + + // Now attempt to read the message. + + for (itemp = 0; itemp < sizeof(porStr); itemp++) + { + // We expect the entire message is ready. + if (!I2_HAS_INPUT(pB)) { + pB->i2ePomSize = itemp; + I2_COMPLETE(pB, I2EE_PORM_SHORT); + } + + pB->i2ePom.c[itemp] = c = inb(pB->i2eData); + + // We check the magic numbers as soon as they are supposed to be read + // (rather than after) to minimize effect of reading something we + // already suspect can't be "us". + if ( (itemp == POR_1_INDEX && c != POR_MAGIC_1) || + (itemp == POR_2_INDEX && c != POR_MAGIC_2)) + { + pB->i2ePomSize = itemp+1; + I2_COMPLETE(pB, I2EE_BADMAGIC); + } + } + + pB->i2ePomSize = itemp; + + // Ensure that this was all the data... + if (I2_HAS_INPUT(pB)) + I2_COMPLETE(pB, I2EE_PORM_LONG); + + // For now, we'll fail to initialize if P.O.S.T reports bad chip mapper: + // Implying we will not be able to download any code either: That's ok: the + // condition is pretty explicit. + if (pB->i2ePom.e.porDiag1 & POR_BAD_MAPPER) + { + I2_COMPLETE(pB, I2EE_POSTERR); + } + + // Determine anything which must be done differently depending on the family + // of boards! + switch (pB->i2ePom.e.porID & POR_ID_FAMILY) + { + case POR_ID_FII: // IntelliPort-II + + pB->i2eFifoStyle = FIFO_II; + pB->i2eFifoSize = 512; // 512 bytes, always + pB->i2eDataWidth16 = false; + + pB->i2eMaxIrq = 15; // Because board cannot tell us it is in an 8-bit + // slot, we do allow it to be done (documentation!) + + pB->i2eGoodMap[1] = + pB->i2eGoodMap[2] = + pB->i2eGoodMap[3] = + pB->i2eChannelMap[1] = + pB->i2eChannelMap[2] = + pB->i2eChannelMap[3] = 0; + + switch (pB->i2ePom.e.porID & POR_ID_SIZE) + { + case POR_ID_II_4: + pB->i2eGoodMap[0] = + pB->i2eChannelMap[0] = 0x0f; // four-port + + // Since porPorts1 is based on the Hardware ID register, the numbers + // should always be consistent for IntelliPort-II. Ditto below... + if (pB->i2ePom.e.porPorts1 != 4) + { + I2_COMPLETE(pB, I2EE_INCONSIST); + } + break; + + case POR_ID_II_8: + case POR_ID_II_8R: + pB->i2eGoodMap[0] = + pB->i2eChannelMap[0] = 0xff; // Eight port + if (pB->i2ePom.e.porPorts1 != 8) + { + I2_COMPLETE(pB, I2EE_INCONSIST); + } + break; + + case POR_ID_II_6: + pB->i2eGoodMap[0] = + pB->i2eChannelMap[0] = 0x3f; // Six Port + if (pB->i2ePom.e.porPorts1 != 6) + { + I2_COMPLETE(pB, I2EE_INCONSIST); + } + break; + } + + // Fix up the "good channel list based on any errors reported. + if (pB->i2ePom.e.porDiag1 & POR_BAD_UART1) + { + pB->i2eGoodMap[0] &= ~0x0f; + } + + if (pB->i2ePom.e.porDiag1 & POR_BAD_UART2) + { + pB->i2eGoodMap[0] &= ~0xf0; + } + + break; // POR_ID_FII case + + case POR_ID_FIIEX: // IntelliPort-IIEX + + pB->i2eFifoStyle = FIFO_IIEX; + + itemp = pB->i2ePom.e.porFifoSize; + + // Implicit assumption that fifo would not grow beyond 32k, + // nor would ever be less than 256. + + if (itemp < 8 || itemp > 15) + { + I2_COMPLETE(pB, I2EE_INCONSIST); + } + pB->i2eFifoSize = (1 << itemp); + + // These are based on what P.O.S.T thinks should be there, based on + // box ID registers + ilimit = pB->i2ePom.e.porNumBoxes; + if (ilimit > ABS_MAX_BOXES) + { + ilimit = ABS_MAX_BOXES; + } + + // For as many boxes as EXIST, gives the type of box. + // Added 8/6/93: check for the ISA-4 (asic) which looks like an + // expandable but for whom "8 or 16?" is not the right question. + + utemp = pB->i2ePom.e.porFlags; + if (utemp & POR_CEX4) + { + pB->i2eChannelMap[0] = 0x000f; + } else { + utemp &= POR_BOXES; + for (itemp = 0; itemp < ilimit; itemp++) + { + pB->i2eChannelMap[itemp] = + ((utemp & POR_BOX_16) ? 0xffff : 0x00ff); + utemp >>= 1; + } + } + + // These are based on what P.O.S.T actually found. + + utemp = (pB->i2ePom.e.porPorts2 << 8) + pB->i2ePom.e.porPorts1; + + for (itemp = 0; itemp < ilimit; itemp++) + { + pB->i2eGoodMap[itemp] = 0; + if (utemp & 1) pB->i2eGoodMap[itemp] |= 0x000f; + if (utemp & 2) pB->i2eGoodMap[itemp] |= 0x00f0; + if (utemp & 4) pB->i2eGoodMap[itemp] |= 0x0f00; + if (utemp & 8) pB->i2eGoodMap[itemp] |= 0xf000; + utemp >>= 4; + } + + // Now determine whether we should transfer in 8 or 16-bit mode. + switch (pB->i2ePom.e.porBus & (POR_BUS_SLOT16 | POR_BUS_DIP16) ) + { + case POR_BUS_SLOT16 | POR_BUS_DIP16: + pB->i2eDataWidth16 = true; + pB->i2eMaxIrq = 15; + break; + + case POR_BUS_SLOT16: + pB->i2eDataWidth16 = false; + pB->i2eMaxIrq = 15; + break; + + case 0: + case POR_BUS_DIP16: // In an 8-bit slot, DIP switch don't care. + default: + pB->i2eDataWidth16 = false; + pB->i2eMaxIrq = 7; + break; + } + break; // POR_ID_FIIEX case + + default: // Unknown type of board + I2_COMPLETE(pB, I2EE_BAD_FAMILY); + break; + } // End the switch based on family + + // Temporarily, claim there is no room in the outbound fifo. + // We will maintain this whenever we check for an empty outbound FIFO. + pB->i2eFifoRemains = 0; + + // Now, based on the bus type, should we expect to be able to re-configure + // interrupts (say, for testing purposes). + switch (pB->i2ePom.e.porBus & POR_BUS_TYPE) + { + case POR_BUS_T_ISA: + case POR_BUS_T_UNK: // If the type of bus is undeclared, assume ok. + case POR_BUS_T_MCA: + case POR_BUS_T_EISA: + break; + default: + I2_COMPLETE(pB, I2EE_BADBUS); + } + + if (pB->i2eDataWidth16) + { + pB->i2eWriteBuf = iiWriteBuf16; + pB->i2eReadBuf = iiReadBuf16; + pB->i2eWriteWord = iiWriteWord16; + pB->i2eReadWord = iiReadWord16; + } else { + pB->i2eWriteBuf = iiWriteBuf8; + pB->i2eReadBuf = iiReadBuf8; + pB->i2eWriteWord = iiWriteWord8; + pB->i2eReadWord = iiReadWord8; + } + + switch(pB->i2eFifoStyle) + { + case FIFO_II: + pB->i2eWaitForTxEmpty = iiWaitForTxEmptyII; + pB->i2eTxMailEmpty = iiTxMailEmptyII; + pB->i2eTrySendMail = iiTrySendMailII; + pB->i2eGetMail = iiGetMailII; + pB->i2eEnableMailIrq = iiEnableMailIrqII; + pB->i2eWriteMask = iiWriteMaskII; + + break; + + case FIFO_IIEX: + pB->i2eWaitForTxEmpty = iiWaitForTxEmptyIIEX; + pB->i2eTxMailEmpty = iiTxMailEmptyIIEX; + pB->i2eTrySendMail = iiTrySendMailIIEX; + pB->i2eGetMail = iiGetMailIIEX; + pB->i2eEnableMailIrq = iiEnableMailIrqIIEX; + pB->i2eWriteMask = iiWriteMaskIIEX; + + break; + + default: + I2_COMPLETE(pB, I2EE_INCONSIST); + } + + // Initialize state information. + pB->i2eState = II_STATE_READY; // Ready to load loadware. + + // Some Final cleanup: + // For some boards, the bootstrap firmware may perform some sort of test + // resulting in a stray character pending in the incoming mailbox. If one is + // there, it should be read and discarded, especially since for the standard + // firmware, it's the mailbox that interrupts the host. + + pB->i2eStartMail = iiGetMail(pB); + + // Throw it away and clear the mailbox structure element + pB->i2eStartMail = NO_MAIL_HERE; + + // Everything is ok now, return with good status/ + + pB->i2eValid = I2E_MAGIC; + I2_COMPLETE(pB, I2EE_GOOD); +} + +//****************************************************************************** +// Function: ii2DelayTimer(mseconds) +// Parameters: mseconds - number of milliseconds to delay +// +// Returns: Nothing +// +// Description: +// +// This routine delays for approximately mseconds milliseconds and is intended +// to be called indirectly through i2Delay field in i2eBordStr. It uses the +// Linux timer_list mechanism. +// +// The Linux timers use a unit called "jiffies" which are 10mS in the Intel +// architecture. This function rounds the delay period up to the next "jiffy". +// In the Alpha architecture the "jiffy" is 1mS, but this driver is not intended +// for Alpha platforms at this time. +// +//****************************************************************************** +static void +ii2DelayTimer(unsigned int mseconds) +{ + msleep_interruptible(mseconds); +} + +#if 0 +//static void ii2DelayIO(unsigned int); +//****************************************************************************** +// !!! Not Used, this is DOS crap, some of you young folks may be interested in +// in how things were done in the stone age of caculating machines !!! +// Function: ii2DelayIO(mseconds) +// Parameters: mseconds - number of milliseconds to delay +// +// Returns: Nothing +// +// Description: +// +// This routine delays for approximately mseconds milliseconds and is intended +// to be called indirectly through i2Delay field in i2eBordStr. It is intended +// for use where a clock-based function is impossible: for example, DOS drivers. +// +// This function uses the IN instruction to place bounds on the timing and +// assumes that ii2Safe has been set. This is because I/O instructions are not +// subject to caching and will therefore take a certain minimum time. To ensure +// the delay is at least long enough on fast machines, it is based on some +// fastest-case calculations. On slower machines this may cause VERY long +// delays. (3 x fastest case). In the fastest case, everything is cached except +// the I/O instruction itself. +// +// Timing calculations: +// The fastest bus speed for I/O operations is likely to be 10 MHz. The I/O +// operation in question is a byte operation to an odd address. For 8-bit +// operations, the architecture generally enforces two wait states. At 10 MHz, a +// single cycle time is 100nS. A read operation at two wait states takes 6 +// cycles for a total time of 600nS. Therefore approximately 1666 iterations +// would be required to generate a single millisecond delay. The worst +// (reasonable) case would be an 8MHz system with no cacheing. In this case, the +// I/O instruction would take 125nS x 6 cyles = 750 nS. More importantly, code +// fetch of other instructions in the loop would take time (zero wait states, +// however) and would be hard to estimate. This is minimized by using in-line +// assembler for the in inner loop of IN instructions. This consists of just a +// few bytes. So we'll guess about four code fetches per loop. Each code fetch +// should take four cycles, so we have 125nS * 8 = 1000nS. Worst case then is +// that what should have taken 1 mS takes instead 1666 * (1750) = 2.9 mS. +// +// So much for theoretical timings: results using 1666 value on some actual +// machines: +// IBM 286 6MHz 3.15 mS +// Zenith 386 33MHz 2.45 mS +// (brandX) 386 33MHz 1.90 mS (has cache) +// (brandY) 486 33MHz 2.35 mS +// NCR 486 ?? 1.65 mS (microchannel) +// +// For most machines, it is probably safe to scale this number back (remember, +// for robust operation use an actual timed delay if possible), so we are using +// a value of 1190. This yields 1.17 mS for the fastest machine in our sample, +// 1.75 mS for typical 386 machines, and 2.25 mS the absolute slowest machine. +// +// 1/29/93: +// The above timings are too slow. Actual cycle times might be faster. ISA cycle +// times could approach 500 nS, and ... +// The IBM model 77 being microchannel has no wait states for 8-bit reads and +// seems to be accessing the I/O at 440 nS per access (from start of one to +// start of next). This would imply we need 1000/.440 = 2272 iterations to +// guarantee we are fast enough. In actual testing, we see that 2 * 1190 are in +// fact enough. For diagnostics, we keep the level at 1190, but developers note +// this needs tuning. +// +// Safe assumption: 2270 i/o reads = 1 millisecond +// +//****************************************************************************** + + +static int ii2DelValue = 1190; // See timing calculations below + // 1666 for fastest theoretical machine + // 1190 safe for most fast 386 machines + // 1000 for fastest machine tested here + // 540 (sic) for AT286/6Mhz +static void +ii2DelayIO(unsigned int mseconds) +{ + if (!ii2Safe) + return; /* Do nothing if this variable uninitialized */ + + while(mseconds--) { + int i = ii2DelValue; + while ( i-- ) { + inb(ii2Safe); + } + } +} +#endif + +//****************************************************************************** +// Function: ii2Nop() +// Parameters: None +// +// Returns: Nothing +// +// Description: +// +// iiInitialize will set i2eDelay to this if the delay parameter is NULL. This +// saves checking for a NULL pointer at every call. +//****************************************************************************** +static void +ii2Nop(void) +{ + return; // no mystery here +} + +//======================================================= +// Routines which are available in 8/16-bit versions, or +// in different fifo styles. These are ALL called +// indirectly through the board structure. +//======================================================= + +//****************************************************************************** +// Function: iiWriteBuf16(pB, address, count) +// Parameters: pB - pointer to board structure +// address - address of data to write +// count - number of data bytes to write +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Writes 'count' bytes from 'address' to the data fifo specified by the board +// structure pointer pB. Should count happen to be odd, an extra pad byte is +// sent (identity unknown...). Uses 16-bit (word) operations. Is called +// indirectly through pB->i2eWriteBuf. +// +//****************************************************************************** +static int +iiWriteBuf16(i2eBordStrPtr pB, unsigned char *address, int count) +{ + // Rudimentary sanity checking here. + if (pB->i2eValid != I2E_MAGIC) + I2_COMPLETE(pB, I2EE_INVALID); + + I2_OUTSW(pB->i2eData, address, count); + + I2_COMPLETE(pB, I2EE_GOOD); +} + +//****************************************************************************** +// Function: iiWriteBuf8(pB, address, count) +// Parameters: pB - pointer to board structure +// address - address of data to write +// count - number of data bytes to write +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Writes 'count' bytes from 'address' to the data fifo specified by the board +// structure pointer pB. Should count happen to be odd, an extra pad byte is +// sent (identity unknown...). This is to be consistent with the 16-bit version. +// Uses 8-bit (byte) operations. Is called indirectly through pB->i2eWriteBuf. +// +//****************************************************************************** +static int +iiWriteBuf8(i2eBordStrPtr pB, unsigned char *address, int count) +{ + /* Rudimentary sanity checking here */ + if (pB->i2eValid != I2E_MAGIC) + I2_COMPLETE(pB, I2EE_INVALID); + + I2_OUTSB(pB->i2eData, address, count); + + I2_COMPLETE(pB, I2EE_GOOD); +} + +//****************************************************************************** +// Function: iiReadBuf16(pB, address, count) +// Parameters: pB - pointer to board structure +// address - address to put data read +// count - number of data bytes to read +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Reads 'count' bytes into 'address' from the data fifo specified by the board +// structure pointer pB. Should count happen to be odd, an extra pad byte is +// received (identity unknown...). Uses 16-bit (word) operations. Is called +// indirectly through pB->i2eReadBuf. +// +//****************************************************************************** +static int +iiReadBuf16(i2eBordStrPtr pB, unsigned char *address, int count) +{ + // Rudimentary sanity checking here. + if (pB->i2eValid != I2E_MAGIC) + I2_COMPLETE(pB, I2EE_INVALID); + + I2_INSW(pB->i2eData, address, count); + + I2_COMPLETE(pB, I2EE_GOOD); +} + +//****************************************************************************** +// Function: iiReadBuf8(pB, address, count) +// Parameters: pB - pointer to board structure +// address - address to put data read +// count - number of data bytes to read +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Reads 'count' bytes into 'address' from the data fifo specified by the board +// structure pointer pB. Should count happen to be odd, an extra pad byte is +// received (identity unknown...). This to match the 16-bit behaviour. Uses +// 8-bit (byte) operations. Is called indirectly through pB->i2eReadBuf. +// +//****************************************************************************** +static int +iiReadBuf8(i2eBordStrPtr pB, unsigned char *address, int count) +{ + // Rudimentary sanity checking here. + if (pB->i2eValid != I2E_MAGIC) + I2_COMPLETE(pB, I2EE_INVALID); + + I2_INSB(pB->i2eData, address, count); + + I2_COMPLETE(pB, I2EE_GOOD); +} + +//****************************************************************************** +// Function: iiReadWord16(pB) +// Parameters: pB - pointer to board structure +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Returns the word read from the data fifo specified by the board-structure +// pointer pB. Uses a 16-bit operation. Is called indirectly through +// pB->i2eReadWord. +// +//****************************************************************************** +static unsigned short +iiReadWord16(i2eBordStrPtr pB) +{ + return inw(pB->i2eData); +} + +//****************************************************************************** +// Function: iiReadWord8(pB) +// Parameters: pB - pointer to board structure +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Returns the word read from the data fifo specified by the board-structure +// pointer pB. Uses two 8-bit operations. Bytes are assumed to be LSB first. Is +// called indirectly through pB->i2eReadWord. +// +//****************************************************************************** +static unsigned short +iiReadWord8(i2eBordStrPtr pB) +{ + unsigned short urs; + + urs = inb(pB->i2eData); + + return (inb(pB->i2eData) << 8) | urs; +} + +//****************************************************************************** +// Function: iiWriteWord16(pB, value) +// Parameters: pB - pointer to board structure +// value - data to write +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Writes the word 'value' to the data fifo specified by the board-structure +// pointer pB. Uses 16-bit operation. Is called indirectly through +// pB->i2eWriteWord. +// +//****************************************************************************** +static void +iiWriteWord16(i2eBordStrPtr pB, unsigned short value) +{ + outw((int)value, pB->i2eData); +} + +//****************************************************************************** +// Function: iiWriteWord8(pB, value) +// Parameters: pB - pointer to board structure +// value - data to write +// +// Returns: True if everything appears copacetic. +// False if there is any error: the pB->i2eError field has the error +// +// Description: +// +// Writes the word 'value' to the data fifo specified by the board-structure +// pointer pB. Uses two 8-bit operations (writes LSB first). Is called +// indirectly through pB->i2eWriteWord. +// +//****************************************************************************** +static void +iiWriteWord8(i2eBordStrPtr pB, unsigned short value) +{ + outb((char)value, pB->i2eData); + outb((char)(value >> 8), pB->i2eData); +} + +//****************************************************************************** +// Function: iiWaitForTxEmptyII(pB, mSdelay) +// Parameters: pB - pointer to board structure +// mSdelay - period to wait before returning +// +// Returns: True if the FIFO is empty. +// False if it not empty in the required time: the pB->i2eError +// field has the error. +// +// Description: +// +// Waits up to "mSdelay" milliseconds for the outgoing FIFO to become empty; if +// not empty by the required time, returns false and error in pB->i2eError, +// otherwise returns true. +// +// mSdelay == 0 is taken to mean must be empty on the first test. +// +// This version operates on IntelliPort-II - style FIFO's +// +// Note this routine is organized so that if status is ok there is no delay at +// all called either before or after the test. Is called indirectly through +// pB->i2eWaitForTxEmpty. +// +//****************************************************************************** +static int +iiWaitForTxEmptyII(i2eBordStrPtr pB, int mSdelay) +{ + unsigned long flags; + int itemp; + + for (;;) + { + // This routine hinges on being able to see the "other" status register + // (as seen by the local processor). His incoming fifo is our outgoing + // FIFO. + // + // By the nature of this routine, you would be using this as part of a + // larger atomic context: i.e., you would use this routine to ensure the + // fifo empty, then act on this information. Between these two halves, + // you will generally not want to service interrupts or in any way + // disrupt the assumptions implicit in the larger context. + // + // Even worse, however, this routine "shifts" the status register to + // point to the local status register which is not the usual situation. + // Therefore for extra safety, we force the critical section to be + // completely atomic, and pick up after ourselves before allowing any + // interrupts of any kind. + + + write_lock_irqsave(&Dl_spinlock, flags); + outb(SEL_COMMAND, pB->i2ePointer); + outb(SEL_CMD_SH, pB->i2ePointer); + + itemp = inb(pB->i2eStatus); + + outb(SEL_COMMAND, pB->i2ePointer); + outb(SEL_CMD_UNSH, pB->i2ePointer); + + if (itemp & ST_IN_EMPTY) + { + I2_UPDATE_FIFO_ROOM(pB); + write_unlock_irqrestore(&Dl_spinlock, flags); + I2_COMPLETE(pB, I2EE_GOOD); + } + + write_unlock_irqrestore(&Dl_spinlock, flags); + + if (mSdelay-- == 0) + break; + + iiDelay(pB, 1); /* 1 mS granularity on checking condition */ + } + I2_COMPLETE(pB, I2EE_TXE_TIME); +} + +//****************************************************************************** +// Function: iiWaitForTxEmptyIIEX(pB, mSdelay) +// Parameters: pB - pointer to board structure +// mSdelay - period to wait before returning +// +// Returns: True if the FIFO is empty. +// False if it not empty in the required time: the pB->i2eError +// field has the error. +// +// Description: +// +// Waits up to "mSdelay" milliseconds for the outgoing FIFO to become empty; if +// not empty by the required time, returns false and error in pB->i2eError, +// otherwise returns true. +// +// mSdelay == 0 is taken to mean must be empty on the first test. +// +// This version operates on IntelliPort-IIEX - style FIFO's +// +// Note this routine is organized so that if status is ok there is no delay at +// all called either before or after the test. Is called indirectly through +// pB->i2eWaitForTxEmpty. +// +//****************************************************************************** +static int +iiWaitForTxEmptyIIEX(i2eBordStrPtr pB, int mSdelay) +{ + unsigned long flags; + + for (;;) + { + // By the nature of this routine, you would be using this as part of a + // larger atomic context: i.e., you would use this routine to ensure the + // fifo empty, then act on this information. Between these two halves, + // you will generally not want to service interrupts or in any way + // disrupt the assumptions implicit in the larger context. + + write_lock_irqsave(&Dl_spinlock, flags); + + if (inb(pB->i2eStatus) & STE_OUT_MT) { + I2_UPDATE_FIFO_ROOM(pB); + write_unlock_irqrestore(&Dl_spinlock, flags); + I2_COMPLETE(pB, I2EE_GOOD); + } + write_unlock_irqrestore(&Dl_spinlock, flags); + + if (mSdelay-- == 0) + break; + + iiDelay(pB, 1); // 1 mS granularity on checking condition + } + I2_COMPLETE(pB, I2EE_TXE_TIME); +} + +//****************************************************************************** +// Function: iiTxMailEmptyII(pB) +// Parameters: pB - pointer to board structure +// +// Returns: True if the transmit mailbox is empty. +// False if it not empty. +// +// Description: +// +// Returns true or false according to whether the transmit mailbox is empty (and +// therefore able to accept more mail) +// +// This version operates on IntelliPort-II - style FIFO's +// +//****************************************************************************** +static int +iiTxMailEmptyII(i2eBordStrPtr pB) +{ + int port = pB->i2ePointer; + outb(SEL_OUTMAIL, port); + return inb(port) == 0; +} + +//****************************************************************************** +// Function: iiTxMailEmptyIIEX(pB) +// Parameters: pB - pointer to board structure +// +// Returns: True if the transmit mailbox is empty. +// False if it not empty. +// +// Description: +// +// Returns true or false according to whether the transmit mailbox is empty (and +// therefore able to accept more mail) +// +// This version operates on IntelliPort-IIEX - style FIFO's +// +//****************************************************************************** +static int +iiTxMailEmptyIIEX(i2eBordStrPtr pB) +{ + return !(inb(pB->i2eStatus) & STE_OUT_MAIL); +} + +//****************************************************************************** +// Function: iiTrySendMailII(pB,mail) +// Parameters: pB - pointer to board structure +// mail - value to write to mailbox +// +// Returns: True if the transmit mailbox is empty, and mail is sent. +// False if it not empty. +// +// Description: +// +// If outgoing mailbox is empty, sends mail and returns true. If outgoing +// mailbox is not empty, returns false. +// +// This version operates on IntelliPort-II - style FIFO's +// +//****************************************************************************** +static int +iiTrySendMailII(i2eBordStrPtr pB, unsigned char mail) +{ + int port = pB->i2ePointer; + + outb(SEL_OUTMAIL, port); + if (inb(port) == 0) { + outb(SEL_OUTMAIL, port); + outb(mail, port); + return 1; + } + return 0; +} + +//****************************************************************************** +// Function: iiTrySendMailIIEX(pB,mail) +// Parameters: pB - pointer to board structure +// mail - value to write to mailbox +// +// Returns: True if the transmit mailbox is empty, and mail is sent. +// False if it not empty. +// +// Description: +// +// If outgoing mailbox is empty, sends mail and returns true. If outgoing +// mailbox is not empty, returns false. +// +// This version operates on IntelliPort-IIEX - style FIFO's +// +//****************************************************************************** +static int +iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail) +{ + if (inb(pB->i2eStatus) & STE_OUT_MAIL) + return 0; + outb(mail, pB->i2eXMail); + return 1; +} + +//****************************************************************************** +// Function: iiGetMailII(pB,mail) +// Parameters: pB - pointer to board structure +// +// Returns: Mailbox data or NO_MAIL_HERE. +// +// Description: +// +// If no mail available, returns NO_MAIL_HERE otherwise returns the data from +// the mailbox, which is guaranteed != NO_MAIL_HERE. +// +// This version operates on IntelliPort-II - style FIFO's +// +//****************************************************************************** +static unsigned short +iiGetMailII(i2eBordStrPtr pB) +{ + if (I2_HAS_MAIL(pB)) { + outb(SEL_INMAIL, pB->i2ePointer); + return inb(pB->i2ePointer); + } else { + return NO_MAIL_HERE; + } +} + +//****************************************************************************** +// Function: iiGetMailIIEX(pB,mail) +// Parameters: pB - pointer to board structure +// +// Returns: Mailbox data or NO_MAIL_HERE. +// +// Description: +// +// If no mail available, returns NO_MAIL_HERE otherwise returns the data from +// the mailbox, which is guaranteed != NO_MAIL_HERE. +// +// This version operates on IntelliPort-IIEX - style FIFO's +// +//****************************************************************************** +static unsigned short +iiGetMailIIEX(i2eBordStrPtr pB) +{ + if (I2_HAS_MAIL(pB)) + return inb(pB->i2eXMail); + else + return NO_MAIL_HERE; +} + +//****************************************************************************** +// Function: iiEnableMailIrqII(pB) +// Parameters: pB - pointer to board structure +// +// Returns: Nothing +// +// Description: +// +// Enables board to interrupt host (only) by writing to host's in-bound mailbox. +// +// This version operates on IntelliPort-II - style FIFO's +// +//****************************************************************************** +static void +iiEnableMailIrqII(i2eBordStrPtr pB) +{ + outb(SEL_MASK, pB->i2ePointer); + outb(ST_IN_MAIL, pB->i2ePointer); +} + +//****************************************************************************** +// Function: iiEnableMailIrqIIEX(pB) +// Parameters: pB - pointer to board structure +// +// Returns: Nothing +// +// Description: +// +// Enables board to interrupt host (only) by writing to host's in-bound mailbox. +// +// This version operates on IntelliPort-IIEX - style FIFO's +// +//****************************************************************************** +static void +iiEnableMailIrqIIEX(i2eBordStrPtr pB) +{ + outb(MX_IN_MAIL, pB->i2eXMask); +} + +//****************************************************************************** +// Function: iiWriteMaskII(pB) +// Parameters: pB - pointer to board structure +// +// Returns: Nothing +// +// Description: +// +// Writes arbitrary value to the mask register. +// +// This version operates on IntelliPort-II - style FIFO's +// +//****************************************************************************** +static void +iiWriteMaskII(i2eBordStrPtr pB, unsigned char value) +{ + outb(SEL_MASK, pB->i2ePointer); + outb(value, pB->i2ePointer); +} + +//****************************************************************************** +// Function: iiWriteMaskIIEX(pB) +// Parameters: pB - pointer to board structure +// +// Returns: Nothing +// +// Description: +// +// Writes arbitrary value to the mask register. +// +// This version operates on IntelliPort-IIEX - style FIFO's +// +//****************************************************************************** +static void +iiWriteMaskIIEX(i2eBordStrPtr pB, unsigned char value) +{ + outb(value, pB->i2eXMask); +} + +//****************************************************************************** +// Function: iiDownloadBlock(pB, pSource, isStandard) +// Parameters: pB - pointer to board structure +// pSource - loadware block to download +// isStandard - True if "standard" loadware, else false. +// +// Returns: Success or Failure +// +// Description: +// +// Downloads a single block (at pSource)to the board referenced by pB. Caller +// sets isStandard to true/false according to whether the "standard" loadware is +// what's being loaded. The normal process, then, is to perform an iiInitialize +// to the board, then perform some number of iiDownloadBlocks using the returned +// state to determine when download is complete. +// +// Possible return values: (see I2ELLIS.H) +// II_DOWN_BADVALID +// II_DOWN_BADFILE +// II_DOWN_CONTINUING +// II_DOWN_GOOD +// II_DOWN_BAD +// II_DOWN_BADSTATE +// II_DOWN_TIMEOUT +// +// Uses the i2eState and i2eToLoad fields (initialized at iiInitialize) to +// determine whether this is the first block, whether to check for magic +// numbers, how many blocks there are to go... +// +//****************************************************************************** +static int +iiDownloadBlock ( i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard) +{ + int itemp; + int loadedFirst; + + if (pB->i2eValid != I2E_MAGIC) return II_DOWN_BADVALID; + + switch(pB->i2eState) + { + case II_STATE_READY: + + // Loading the first block after reset. Must check the magic number of the + // loadfile, store the number of blocks we expect to load. + if (pSource->e.loadMagic != MAGIC_LOADFILE) + { + return II_DOWN_BADFILE; + } + + // Next we store the total number of blocks to load, including this one. + pB->i2eToLoad = 1 + pSource->e.loadBlocksMore; + + // Set the state, store the version numbers. ('Cause this may have come + // from a file - we might want to report these versions and revisions in + // case of an error! + pB->i2eState = II_STATE_LOADING; + pB->i2eLVersion = pSource->e.loadVersion; + pB->i2eLRevision = pSource->e.loadRevision; + pB->i2eLSub = pSource->e.loadSubRevision; + + // The time and date of compilation is also available but don't bother + // storing it for normal purposes. + loadedFirst = 1; + break; + + case II_STATE_LOADING: + loadedFirst = 0; + break; + + default: + return II_DOWN_BADSTATE; + } + + // Now we must be in the II_STATE_LOADING state, and we assume i2eToLoad + // must be positive still, because otherwise we would have cleaned up last + // time and set the state to II_STATE_LOADED. + if (!iiWaitForTxEmpty(pB, MAX_DLOAD_READ_TIME)) { + return II_DOWN_TIMEOUT; + } + + if (!iiWriteBuf(pB, pSource->c, LOADWARE_BLOCK_SIZE)) { + return II_DOWN_BADVALID; + } + + // If we just loaded the first block, wait for the fifo to empty an extra + // long time to allow for any special startup code in the firmware, like + // sending status messages to the LCD's. + + if (loadedFirst) { + if (!iiWaitForTxEmpty(pB, MAX_DLOAD_START_TIME)) { + return II_DOWN_TIMEOUT; + } + } + + // Determine whether this was our last block! + if (--(pB->i2eToLoad)) { + return II_DOWN_CONTINUING; // more to come... + } + + // It WAS our last block: Clean up operations... + // ...Wait for last buffer to drain from the board... + if (!iiWaitForTxEmpty(pB, MAX_DLOAD_READ_TIME)) { + return II_DOWN_TIMEOUT; + } + // If there were only a single block written, this would come back + // immediately and be harmless, though not strictly necessary. + itemp = MAX_DLOAD_ACK_TIME/10; + while (--itemp) { + if (I2_HAS_INPUT(pB)) { + switch (inb(pB->i2eData)) { + case LOADWARE_OK: + pB->i2eState = + isStandard ? II_STATE_STDLOADED :II_STATE_LOADED; + + // Some revisions of the bootstrap firmware (e.g. ISA-8 1.0.2) + // will, // if there is a debug port attached, require some + // time to send information to the debug port now. It will do + // this before // executing any of the code we just downloaded. + // It may take up to 700 milliseconds. + if (pB->i2ePom.e.porDiag2 & POR_DEBUG_PORT) { + iiDelay(pB, 700); + } + + return II_DOWN_GOOD; + + case LOADWARE_BAD: + default: + return II_DOWN_BAD; + } + } + + iiDelay(pB, 10); // 10 mS granularity on checking condition + } + + // Drop-through --> timed out waiting for firmware confirmation + + pB->i2eState = II_STATE_BADLOAD; + return II_DOWN_TIMEOUT; +} + +//****************************************************************************** +// Function: iiDownloadAll(pB, pSource, isStandard, size) +// Parameters: pB - pointer to board structure +// pSource - loadware block to download +// isStandard - True if "standard" loadware, else false. +// size - size of data to download (in bytes) +// +// Returns: Success or Failure +// +// Description: +// +// Given a pointer to a board structure, a pointer to the beginning of some +// loadware, whether it is considered the "standard loadware", and the size of +// the array in bytes loads the entire array to the board as loadware. +// +// Assumes the board has been freshly reset and the power-up reset message read. +// (i.e., in II_STATE_READY). Complains if state is bad, or if there seems to be +// too much or too little data to load, or if iiDownloadBlock complains. +//****************************************************************************** +static int +iiDownloadAll(i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard, int size) +{ + int status; + + // We know (from context) board should be ready for the first block of + // download. Complain if not. + if (pB->i2eState != II_STATE_READY) return II_DOWN_BADSTATE; + + while (size > 0) { + size -= LOADWARE_BLOCK_SIZE; // How much data should there be left to + // load after the following operation ? + + // Note we just bump pSource by "one", because its size is actually that + // of an entire block, same as LOADWARE_BLOCK_SIZE. + status = iiDownloadBlock(pB, pSource++, isStandard); + + switch(status) + { + case II_DOWN_GOOD: + return ( (size > 0) ? II_DOWN_OVER : II_DOWN_GOOD); + + case II_DOWN_CONTINUING: + break; + + default: + return status; + } + } + + // We shouldn't drop out: it means "while" caught us with nothing left to + // download, yet the previous DownloadBlock did not return complete. Ergo, + // not enough data to match the size byte in the header. + return II_DOWN_UNDER; +} diff --git a/drivers/staging/tty/ip2/i2ellis.h b/drivers/staging/tty/ip2/i2ellis.h new file mode 100644 index 000000000000..fb6df2456018 --- /dev/null +++ b/drivers/staging/tty/ip2/i2ellis.h @@ -0,0 +1,566 @@ +/******************************************************************************* +* +* (c) 1999 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Mainline code for the device driver +* +*******************************************************************************/ +//------------------------------------------------------------------------------ +// i2ellis.h +// +// IntelliPort-II and IntelliPort-IIEX +// +// Extremely +// Low +// Level +// Interface +// Services +// +// Structure Definitions and declarations for "ELLIS" service routines found in +// i2ellis.c +// +// These routines are based on properties of the IntelliPort-II and -IIEX +// hardware and bootstrap firmware, and are not sensitive to particular +// conventions of any particular loadware. +// +// Unlike i2hw.h, which provides IRONCLAD hardware definitions, the material +// here and in i2ellis.c is intended to provice a useful, but not required, +// layer of insulation from the hardware specifics. +//------------------------------------------------------------------------------ +#ifndef I2ELLIS_H /* To prevent multiple includes */ +#define I2ELLIS_H 1 +//------------------------------------------------ +// Revision History: +// +// 30 September 1991 MAG First Draft Started +// 12 October 1991 ...continued... +// +// 20 December 1996 AKM Linux version +//------------------------------------------------- + +//---------------------- +// Mandatory Includes: +//---------------------- +#include "ip2types.h" +#include "i2hw.h" // The hardware definitions + +//------------------------------------------ +// STAT_BOXIDS packets +//------------------------------------------ +#define MAX_BOX 4 + +typedef struct _bidStat +{ + unsigned char bid_value[MAX_BOX]; +} bidStat, *bidStatPtr; + +// This packet is sent in response to a CMD_GET_BOXIDS bypass command. For -IIEX +// boards, reports the hardware-specific "asynchronous resource register" on +// each expansion box. Boxes not present report 0xff. For -II boards, the first +// element contains 0x80 for 8-port, 0x40 for 4-port boards. + +// Box IDs aka ARR or Async Resource Register (more than you want to know) +// 7 6 5 4 3 2 1 0 +// F F N N L S S S +// ============================= +// F F - Product Family Designator +// =====+++++++++++++++++++++++++++++++ +// 0 0 - Intelliport II EX / ISA-8 +// 1 0 - IntelliServer +// 0 1 - SAC - Port Device (Intelliport III ??? ) +// =====+++++++++++++++++++++++++++++++++++++++ +// N N - Number of Ports +// 0 0 - 8 (eight) +// 0 1 - 4 (four) +// 1 0 - 12 (twelve) +// 1 1 - 16 (sixteen) +// =++++++++++++++++++++++++++++++++++ +// L - LCD Display Module Present +// 0 - No +// 1 - LCD module present +// =========+++++++++++++++++++++++++++++++++++++ +// S S S - Async Signals Supported Designator +// 0 0 0 - 8dss, Mod DCE DB25 Female +// 0 0 1 - 6dss, RJ-45 +// 0 1 0 - RS-232/422 dss, DB25 Female +// 0 1 1 - RS-232/422 dss, separate 232/422 DB25 Female +// 1 0 0 - 6dss, 921.6 I/F with ST654's +// 1 0 1 - RS-423/232 8dss, RJ-45 10Pin +// 1 1 0 - 6dss, Mod DCE DB25 Female +// 1 1 1 - NO BOX PRESENT + +#define FF(c) ((c & 0xC0) >> 6) +#define NN(c) ((c & 0x30) >> 4) +#define L(c) ((c & 0x08) >> 3) +#define SSS(c) (c & 0x07) + +#define BID_HAS_654(x) (SSS(x) == 0x04) +#define BID_NO_BOX 0xff /* no box */ +#define BID_8PORT 0x80 /* IP2-8 port */ +#define BID_4PORT 0x81 /* IP2-4 port */ +#define BID_EXP_MASK 0x30 /* IP2-EX */ +#define BID_EXP_8PORT 0x00 /* 8, */ +#define BID_EXP_4PORT 0x10 /* 4, */ +#define BID_EXP_UNDEF 0x20 /* UNDEF, */ +#define BID_EXP_16PORT 0x30 /* 16, */ +#define BID_LCD_CTRL 0x08 /* LCD Controller */ +#define BID_LCD_NONE 0x00 /* - no controller present */ +#define BID_LCD_PRES 0x08 /* - controller present */ +#define BID_CON_MASK 0x07 /* - connector pinouts */ +#define BID_CON_DB25 0x00 /* - DB-25 F */ +#define BID_CON_RJ45 0x01 /* - rj45 */ + +//------------------------------------------------------------------------------ +// i2eBordStr +// +// This structure contains all the information the ELLIS routines require in +// dealing with a particular board. +//------------------------------------------------------------------------------ +// There are some queues here which are guaranteed to never contain the entry +// for a single channel twice. So they must be slightly larger to allow +// unambiguous full/empty management +// +#define CH_QUEUE_SIZE ABS_MOST_PORTS+2 + +typedef struct _i2eBordStr +{ + porStr i2ePom; // Structure containing the power-on message. + + unsigned short i2ePomSize; + // The number of bytes actually read if + // different from sizeof i2ePom, indicates + // there is an error! + + unsigned short i2eStartMail; + // Contains whatever inbound mailbox data + // present at startup. NO_MAIL_HERE indicates + // nothing was present. No special + // significance as of this writing, but may be + // useful for diagnostic reasons. + + unsigned short i2eValid; + // Indicates validity of the structure; if + // i2eValid == I2E_MAGIC, then we can trust + // the other fields. Some (especially + // initialization) functions are good about + // checking for validity. Many functions do + // not, it being assumed that the larger + // context assures we are using a valid + // i2eBordStrPtr. + + unsigned short i2eError; + // Used for returning an error condition from + // several functions which use i2eBordStrPtr + // as an argument. + + // Accelerators to characterize separate features of a board, derived from a + // number of sources. + + unsigned short i2eFifoSize; + // Always, the size of the FIFO. For + // IntelliPort-II, always the same, for -IIEX + // taken from the Power-On reset message. + + volatile + unsigned short i2eFifoRemains; + // Used during normal operation to indicate a + // lower bound on the amount of data which + // might be in the outbound fifo. + + unsigned char i2eFifoStyle; + // Accelerator which tells which style (-II or + // -IIEX) FIFO we are using. + + unsigned char i2eDataWidth16; + // Accelerator which tells whether we should + // do 8 or 16-bit data transfers. + + unsigned char i2eMaxIrq; + // The highest allowable IRQ, based on the + // slot size. + + // Accelerators for various addresses on the board + int i2eBase; // I/O Address of the Board + int i2eData; // From here data transfers happen + int i2eStatus; // From here status reads happen + int i2ePointer; // (IntelliPort-II: pointer/commands) + int i2eXMail; // (IntelliPOrt-IIEX: mailboxes + int i2eXMask; // (IntelliPort-IIEX: mask write + + //------------------------------------------------------- + // Information presented in a common format across boards + // For each box, bit map of the channels present. Box closest to + // the host is box 0. LSB is channel 0. IntelliPort-II (non-expandable) + // is taken to be box 0. These are derived from product i.d. registers. + + unsigned short i2eChannelMap[ABS_MAX_BOXES]; + + // Same as above, except each is derived from firmware attempting to detect + // the uart presence (by reading a valid GFRCR register). If bits are set in + // i2eChannelMap and not in i2eGoodMap, there is a potential problem. + + unsigned short i2eGoodMap[ABS_MAX_BOXES]; + + // --------------------------- + // For indirect function calls + + // Routine to cause an N-millisecond delay: Patched by the ii2Initialize + // function. + + void (*i2eDelay)(unsigned int); + + // Routine to write N bytes to the board through the FIFO. Returns true if + // all copacetic, otherwise returns false and error is in i2eError field. + // IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER. + + int (*i2eWriteBuf)(struct _i2eBordStr *, unsigned char *, int); + + // Routine to read N bytes from the board through the FIFO. Returns true if + // copacetic, otherwise returns false and error in i2eError. + // IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER. + + int (*i2eReadBuf)(struct _i2eBordStr *, unsigned char *, int); + + // Returns a word from FIFO. Will use 2 byte operations if needed. + + unsigned short (*i2eReadWord)(struct _i2eBordStr *); + + // Writes a word to FIFO. Will use 2 byte operations if needed. + + void (*i2eWriteWord)(struct _i2eBordStr *, unsigned short); + + // Waits specified time for the Transmit FIFO to go empty. Returns true if + // ok, otherwise returns false and error in i2eError. + + int (*i2eWaitForTxEmpty)(struct _i2eBordStr *, int); + + // Returns true or false according to whether the outgoing mailbox is empty. + + int (*i2eTxMailEmpty)(struct _i2eBordStr *); + + // Checks whether outgoing mailbox is empty. If so, sends mail and returns + // true. Otherwise returns false. + + int (*i2eTrySendMail)(struct _i2eBordStr *, unsigned char); + + // If no mail available, returns NO_MAIL_HERE, else returns the value in the + // mailbox (guaranteed can't be NO_MAIL_HERE). + + unsigned short (*i2eGetMail)(struct _i2eBordStr *); + + // Enables the board to interrupt the host when it writes to the mailbox. + // Irqs will not occur, however, until the loadware separately enables + // interrupt generation to the host. The standard loadware does this in + // response to a command packet sent by the host. (Also, disables + // any other potential interrupt sources from the board -- other than the + // inbound mailbox). + + void (*i2eEnableMailIrq)(struct _i2eBordStr *); + + // Writes an arbitrary value to the mask register. + + void (*i2eWriteMask)(struct _i2eBordStr *, unsigned char); + + + // State information + + // During downloading, indicates the number of blocks remaining to download + // to the board. + + short i2eToLoad; + + // State of board (see manifests below) (e.g., whether in reset condition, + // whether standard loadware is installed, etc. + + unsigned char i2eState; + + // These three fields are only valid when there is loadware running on the + // board. (i2eState == II_STATE_LOADED or i2eState == II_STATE_STDLOADED ) + + unsigned char i2eLVersion; // Loadware version + unsigned char i2eLRevision; // Loadware revision + unsigned char i2eLSub; // Loadware subrevision + + // Flags which only have meaning in the context of the standard loadware. + // Somewhat violates the layering concept, but there is so little additional + // needed at the board level (while much additional at the channel level), + // that this beats maintaining two different per-board structures. + + // Indicates which IRQ the board has been initialized (from software) to use + // For MicroChannel boards, any value different from IRQ_UNDEFINED means + // that the software command has been sent to enable interrupts (or specify + // they are disabled). Special value: IRQ_UNDEFINED indicates that the + // software command to select the interrupt has not yet been sent, therefore + // (since the standard loadware insists that it be sent before any other + // packets are sent) no other packets should be sent yet. + + unsigned short i2eUsingIrq; + + // This is set when we hit the MB_OUT_STUFFED mailbox, which prevents us + // putting more in the mailbox until an appropriate mailbox message is + // received. + + unsigned char i2eWaitingForEmptyFifo; + + // Any mailbox bits waiting to be sent to the board are OR'ed in here. + + unsigned char i2eOutMailWaiting; + + // The head of any incoming packet is read into here, is then examined and + // we dispatch accordingly. + + unsigned short i2eLeadoffWord[1]; + + // Running counter of interrupts where the mailbox indicated incoming data. + + unsigned short i2eFifoInInts; + + // Running counter of interrupts where the mailbox indicated outgoing data + // had been stripped. + + unsigned short i2eFifoOutInts; + + // If not void, gives the address of a routine to call if fatal board error + // is found (only applies to standard l/w). + + void (*i2eFatalTrap)(struct _i2eBordStr *); + + // Will point to an array of some sort of channel structures (whose format + // is unknown at this level, being a function of what loadware is + // installed and the code configuration (max sizes of buffers, etc.)). + + void *i2eChannelPtr; + + // Set indicates that the board has gone fatal. + + unsigned short i2eFatal; + + // The number of elements pointed to by i2eChannelPtr. + + unsigned short i2eChannelCnt; + + // Ring-buffers of channel structures whose channels have particular needs. + + rwlock_t Fbuf_spinlock; + volatile + unsigned short i2Fbuf_strip; // Strip index + volatile + unsigned short i2Fbuf_stuff; // Stuff index + void *i2Fbuf[CH_QUEUE_SIZE]; // An array of channel pointers + // of channels who need to send + // flow control packets. + rwlock_t Dbuf_spinlock; + volatile + unsigned short i2Dbuf_strip; // Strip index + volatile + unsigned short i2Dbuf_stuff; // Stuff index + void *i2Dbuf[CH_QUEUE_SIZE]; // An array of channel pointers + // of channels who need to send + // data or in-line command packets. + rwlock_t Bbuf_spinlock; + volatile + unsigned short i2Bbuf_strip; // Strip index + volatile + unsigned short i2Bbuf_stuff; // Stuff index + void *i2Bbuf[CH_QUEUE_SIZE]; // An array of channel pointers + // of channels who need to send + // bypass command packets. + + /* + * A set of flags to indicate that certain events have occurred on at least + * one of the ports on this board. We use this to decide whether to spin + * through the channels looking for breaks, etc. + */ + int got_input; + int status_change; + bidStat channelBtypes; + + /* + * Debugging counters, etc. + */ + unsigned long debugFlowQueued; + unsigned long debugInlineQueued; + unsigned long debugDataQueued; + unsigned long debugBypassQueued; + unsigned long debugFlowCount; + unsigned long debugInlineCount; + unsigned long debugBypassCount; + + rwlock_t read_fifo_spinlock; + rwlock_t write_fifo_spinlock; + +// For queuing interrupt bottom half handlers. /\/\|=mhw=|\/\/ + struct work_struct tqueue_interrupt; + + struct timer_list SendPendingTimer; // Used by iiSendPending + unsigned int SendPendingRetry; +} i2eBordStr, *i2eBordStrPtr; + +//------------------------------------------------------------------- +// Macro Definitions for the indirect calls defined in the i2eBordStr +//------------------------------------------------------------------- +// +#define iiDelay(a,b) (*(a)->i2eDelay)(b) +#define iiWriteBuf(a,b,c) (*(a)->i2eWriteBuf)(a,b,c) +#define iiReadBuf(a,b,c) (*(a)->i2eReadBuf)(a,b,c) + +#define iiWriteWord(a,b) (*(a)->i2eWriteWord)(a,b) +#define iiReadWord(a) (*(a)->i2eReadWord)(a) + +#define iiWaitForTxEmpty(a,b) (*(a)->i2eWaitForTxEmpty)(a,b) + +#define iiTxMailEmpty(a) (*(a)->i2eTxMailEmpty)(a) +#define iiTrySendMail(a,b) (*(a)->i2eTrySendMail)(a,b) + +#define iiGetMail(a) (*(a)->i2eGetMail)(a) +#define iiEnableMailIrq(a) (*(a)->i2eEnableMailIrq)(a) +#define iiDisableMailIrq(a) (*(a)->i2eWriteMask)(a,0) +#define iiWriteMask(a,b) (*(a)->i2eWriteMask)(a,b) + +//------------------------------------------- +// Manifests for i2eBordStr: +//------------------------------------------- + +typedef void (*delayFunc_t)(unsigned int); + +// i2eValid +// +#define I2E_MAGIC 0x4251 // Structure is valid. +#define I2E_INCOMPLETE 0x1122 // Structure failed during init. + + +// i2eError +// +#define I2EE_GOOD 0 // Operation successful +#define I2EE_BADADDR 1 // Address out of range +#define I2EE_BADSTATE 2 // Attempt to perform a function when the board + // structure was in the incorrect state +#define I2EE_BADMAGIC 3 // Bad magic number from Power On test (i2ePomSize + // reflects what was read +#define I2EE_PORM_SHORT 4 // Power On message too short +#define I2EE_PORM_LONG 5 // Power On message too long +#define I2EE_BAD_FAMILY 6 // Un-supported board family type +#define I2EE_INCONSIST 7 // Firmware reports something impossible, + // e.g. unexpected number of ports... Almost no + // excuse other than bad FIFO... +#define I2EE_POSTERR 8 // Power-On self test reported a bad error +#define I2EE_BADBUS 9 // Unknown Bus type declared in message +#define I2EE_TXE_TIME 10 // Timed out waiting for TX Fifo to empty +#define I2EE_INVALID 11 // i2eValid field does not indicate a valid and + // complete board structure (for functions which + // require this be so.) +#define I2EE_BAD_PORT 12 // Discrepancy between channels actually found and + // what the product is supposed to have. Check + // i2eGoodMap vs i2eChannelMap for details. +#define I2EE_BAD_IRQ 13 // Someone specified an unsupported IRQ +#define I2EE_NOCHANNELS 14 // No channel structures have been defined (for + // functions requiring this). + +// i2eFifoStyle +// +#define FIFO_II 0 /* IntelliPort-II style: see also i2hw.h */ +#define FIFO_IIEX 1 /* IntelliPort-IIEX style */ + +// i2eGetMail +// +#define NO_MAIL_HERE 0x1111 // Since mail is unsigned char, cannot possibly + // promote to 0x1111. +// i2eState +// +#define II_STATE_COLD 0 // Addresses have been defined, but board not even + // reset yet. +#define II_STATE_RESET 1 // Board,if it exists, has just been reset +#define II_STATE_READY 2 // Board ready for its first block +#define II_STATE_LOADING 3 // Board continuing load +#define II_STATE_LOADED 4 // Board has finished load: status ok +#define II_STATE_BADLOAD 5 // Board has finished load: failed! +#define II_STATE_STDLOADED 6 // Board has finished load: standard firmware + +// i2eUsingIrq +// +#define I2_IRQ_UNDEFINED 0x1352 /* No valid irq (or polling = 0) can + * ever promote to this! */ +//------------------------------------------ +// Handy Macros for i2ellis.c and others +// Note these are common to -II and -IIEX +//------------------------------------------ + +// Given a pointer to the board structure, does the input FIFO have any data or +// not? +// +#define I2_HAS_INPUT(pB) !(inb(pB->i2eStatus) & ST_IN_EMPTY) + +// Given a pointer to the board structure, is there anything in the incoming +// mailbox? +// +#define I2_HAS_MAIL(pB) (inb(pB->i2eStatus) & ST_IN_MAIL) + +#define I2_UPDATE_FIFO_ROOM(pB) ((pB)->i2eFifoRemains = (pB)->i2eFifoSize) + +//------------------------------------------ +// Function Declarations for i2ellis.c +//------------------------------------------ +// +// Functions called directly +// +// Initialization of a board & structure is in four (five!) parts: +// +// 1) iiSetAddress() - Define the board address & delay function for a board. +// 2) iiReset() - Reset the board (provided it exists) +// -- Note you may do this to several boards -- +// 3) iiResetDelay() - Delay for 2 seconds (once for all boards) +// 4) iiInitialize() - Attempt to read Power-up message; further initialize +// accelerators +// +// Then you may use iiDownloadAll() or iiDownloadFile() (in i2file.c) to write +// loadware. To change loadware, you must begin again with step 2, resetting +// the board again (step 1 not needed). + +static int iiSetAddress(i2eBordStrPtr, int, delayFunc_t ); +static int iiReset(i2eBordStrPtr); +static int iiResetDelay(i2eBordStrPtr); +static int iiInitialize(i2eBordStrPtr); + +// Routine to validate that all channels expected are there. +// +extern int iiValidateChannels(i2eBordStrPtr); + +// Routine used to download a block of loadware. +// +static int iiDownloadBlock(i2eBordStrPtr, loadHdrStrPtr, int); + +// Return values given by iiDownloadBlock, iiDownloadAll, iiDownloadFile: +// +#define II_DOWN_BADVALID 0 // board structure is invalid +#define II_DOWN_CONTINUING 1 // So far, so good, firmware expects more +#define II_DOWN_GOOD 2 // Download complete, CRC good +#define II_DOWN_BAD 3 // Download complete, but CRC bad +#define II_DOWN_BADFILE 4 // Bad magic number in loadware file +#define II_DOWN_BADSTATE 5 // Board is in an inappropriate state for + // downloading loadware. (see i2eState) +#define II_DOWN_TIMEOUT 6 // Timeout waiting for firmware +#define II_DOWN_OVER 7 // Too much data +#define II_DOWN_UNDER 8 // Not enough data +#define II_DOWN_NOFILE 9 // Loadware file not found + +// Routine to download an entire loadware module: Return values are a subset of +// iiDownloadBlock's, excluding, of course, II_DOWN_CONTINUING +// +static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int); + +// Many functions defined here return True if good, False otherwise, with an +// error code in i2eError field. Here is a handy macro for setting the error +// code and returning. +// +#define I2_COMPLETE(pB,code) do { \ + pB->i2eError = code; \ + return (code == I2EE_GOOD);\ + } while (0) + +#endif // I2ELLIS_H diff --git a/drivers/staging/tty/ip2/i2hw.h b/drivers/staging/tty/ip2/i2hw.h new file mode 100644 index 000000000000..c0ba6c05f0cd --- /dev/null +++ b/drivers/staging/tty/ip2/i2hw.h @@ -0,0 +1,652 @@ +/******************************************************************************* +* +* (c) 1999 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Definitions limited to properties of the hardware or the +* bootstrap firmware. As such, they are applicable regardless of +* operating system or loadware (standard or diagnostic). +* +*******************************************************************************/ +#ifndef I2HW_H +#define I2HW_H 1 +//------------------------------------------------------------------------------ +// Revision History: +// +// 23 September 1991 MAG First Draft Started...through... +// 11 October 1991 ... Continuing development... +// 6 August 1993 Added support for ISA-4 (asic) which is architected +// as an ISA-CEX with a single 4-port box. +// +// 20 December 1996 AKM Version for Linux +// +//------------------------------------------------------------------------------ +/*------------------------------------------------------------------------------ + +HARDWARE DESCRIPTION: + +Introduction: + +The IntelliPort-II and IntelliPort-IIEX products occupy a block of eight (8) +addresses in the host's I/O space. + +Some addresses are used to transfer data to/from the board, some to transfer +so-called "mailbox" messages, and some to read bit-mapped status information. +While all the products in the line are functionally similar, some use a 16-bit +data path to transfer data while others use an 8-bit path. Also, the use of +command /status/mailbox registers differs slightly between the II and IIEX +branches of the family. + +The host determines what type of board it is dealing with by reading a string of +sixteen characters from the board. These characters are always placed in the +fifo by the board's local processor whenever the board is reset (either from +power-on or under software control) and are known as the "Power-on Reset +Message." In order that this message can be read from either type of board, the +hardware registers used in reading this message are the same. Once this message +has been read by the host, then it has the information required to operate. + +General Differences between boards: + +The greatest structural difference is between the -II and -IIEX families of +product. The -II boards use the Am4701 dual 512x8 bidirectional fifo to support +the data path, mailbox registers, and status registers. This chip contains some +features which are not used in the IntelliPort-II products; a description of +these is omitted here. Because of these many features, it contains many +registers, too many to access directly within a small address space. They are +accessed by first writing a value to a "pointer" register. This value selects +the register to be accessed. The next read or write to that address accesses +the selected register rather than the pointer register. + +The -IIEX boards use a proprietary design similar to the Am4701 in function. But +because of a simpler, more streamlined design it doesn't require so many +registers. This means they can be accessed directly in single operations rather +than through a pointer register. + +Besides these differences, there are differences in whether 8-bit or 16-bit +transfers are used to move data to the board. + +The -II boards are capable only of 8-bit data transfers, while the -IIEX boards +may be configured for either 8-bit or 16-bit data transfers. If the on-board DIP +switch #8 is ON, and the card has been installed in a 16-bit slot, 16-bit +transfers are supported (and will be expected by the standard loadware). The +on-board firmware can determine the position of the switch, and whether the +board is installed in a 16-bit slot; it supplies this information to the host as +part of the power-up reset message. + +The configuration switch (#8) and slot selection do not directly configure the +hardware. It is up to the on-board loadware and host-based drivers to act +according to the selected options. That is, loadware and drivers could be +written to perform 8-bit transfers regardless of the state of the DIP switch or +slot (and in a diagnostic environment might well do so). Likewise, 16-bit +transfers could be performed as long as the card is in a 16-bit slot. + +Note the slot selection and DIP switch selection are provided separately: a +board running in 8-bit mode in a 16-bit slot has a greater range of possible +interrupts to choose from; information of potential use to the host. + +All 8-bit data transfers are done in the same way, regardless of whether on a +-II board or a -IIEX board. + +The host must consider two things then: 1) whether a -II or -IIEX product is +being used, and 2) whether an 8-bit or 16-bit data path is used. + +A further difference is that -II boards always have a 512-byte fifo operating in +each direction. -IIEX boards may use fifos of varying size; this size is +reported as part of the power-up message. + +I/O Map Of IntelliPort-II and IntelliPort-IIEX boards: +(Relative to the chosen base address) + +Addr R/W IntelliPort-II IntelliPort-IIEX +---- --- -------------- ---------------- +0 R/W Data Port (byte) Data Port (byte or word) +1 R/W (Not used) (MSB of word-wide data written to Data Port) +2 R Status Register Status Register +2 W Pointer Register Interrupt Mask Register +3 R/W (Not used) Mailbox Registers (6 bits: 11111100) +4,5 -- Reserved for future products +6 -- Reserved for future products +7 R Guaranteed to have no effect +7 W Hardware reset of board. + + +Rules: +All data transfers are performed using the even i/o address. If byte-wide data +transfers are being used, do INB/OUTB operations on the data port. If word-wide +transfers are used, do INW/OUTW operations. In some circumstances (such as +reading the power-up message) you will do INB from the data port, but in this +case the MSB of each word read is lost. When accessing all other unreserved +registers, use byte operations only. +------------------------------------------------------------------------------*/ + +//------------------------------------------------ +// Mandatory Includes: +//------------------------------------------------ +// +#include "ip2types.h" + +//------------------------------------------------------------------------- +// Manifests for the I/O map: +//------------------------------------------------------------------------- +// R/W: Data port (byte) for IntelliPort-II, +// R/W: Data port (byte or word) for IntelliPort-IIEX +// Incoming or outgoing data passes through a FIFO, the status of which is +// available in some of the bits in FIFO_STATUS. This (bidirectional) FIFO is +// the primary means of transferring data, commands, flow-control, and status +// information between the host and board. +// +#define FIFO_DATA 0 + +// Another way of passing information between the board and the host is +// through "mailboxes". Unlike a FIFO, a mailbox holds only a single byte of +// data. Writing data to the mailbox causes a status bit to be set, and +// potentially interrupting the intended receiver. The sender has some way to +// determine whether the data has been read yet; as soon as it has, it may send +// more. The mailboxes are handled differently on -II and -IIEX products, as +// suggested below. +//------------------------------------------------------------------------------ +// Read: Status Register for IntelliPort-II or -IIEX +// The presence of any bit set here will cause an interrupt to the host, +// provided the corresponding bit has been unmasked in the interrupt mask +// register. Furthermore, interrupts to the host are disabled globally until the +// loadware selects the irq line to use. With the exception of STN_MR, the bits +// remain set so long as the associated condition is true. +// +#define FIFO_STATUS 2 + +// Bit map of status bits which are identical for -II and -IIEX +// +#define ST_OUT_FULL 0x40 // Outbound FIFO full +#define ST_IN_EMPTY 0x20 // Inbound FIFO empty +#define ST_IN_MAIL 0x04 // Inbound Mailbox full + +// The following exists only on the Intelliport-IIEX, and indicates that the +// board has not read the last outgoing mailbox data yet. In the IntelliPort-II, +// the outgoing mailbox may be read back: a zero indicates the board has read +// the data. +// +#define STE_OUT_MAIL 0x80 // Outbound mailbox full (!) + +// The following bits are defined differently for -II and -IIEX boards. Code +// which relies on these bits will need to be functionally different for the two +// types of boards and should be generally avoided because of the additional +// complexity this creates: + +// Bit map of status bits only on -II + +// Fifo has been RESET (cleared when the status register is read). Note that +// this condition cannot be masked and would always interrupt the host, except +// that the hardware reset also disables interrupts globally from the board +// until re-enabled by loadware. This could also arise from the +// Am4701-supported command to reset the chip, but this command is generally not +// used here. +// +#define STN_MR 0x80 + +// See the AMD Am4701 data sheet for details on the following four bits. They +// are not presently used by Computone drivers. +// +#define STN_OUT_AF 0x10 // Outbound FIFO almost full (programmable) +#define STN_IN_AE 0x08 // Inbound FIFO almost empty (programmable) +#define STN_BD 0x02 // Inbound byte detected +#define STN_PE 0x01 // Parity/Framing condition detected + +// Bit-map of status bits only on -IIEX +// +#define STE_OUT_HF 0x10 // Outbound FIFO half full +#define STE_IN_HF 0x08 // Inbound FIFO half full +#define STE_IN_FULL 0x02 // Inbound FIFO full +#define STE_OUT_MT 0x01 // Outbound FIFO empty + +//------------------------------------------------------------------------------ + +// Intelliport-II -- Write Only: the pointer register. +// Values are written to this register to select the Am4701 internal register to +// be accessed on the next operation. +// +#define FIFO_PTR 0x02 + +// Values for the pointer register +// +#define SEL_COMMAND 0x1 // Selects the Am4701 command register + +// Some possible commands: +// +#define SEL_CMD_MR 0x80 // Am4701 command to reset the chip +#define SEL_CMD_SH 0x40 // Am4701 command to map the "other" port into the + // status register. +#define SEL_CMD_UNSH 0 // Am4701 command to "unshift": port maps into its + // own status register. +#define SEL_MASK 0x2 // Selects the Am4701 interrupt mask register. The + // interrupt mask register is bit-mapped to match + // the status register (FIFO_STATUS) except for + // STN_MR. (See above.) +#define SEL_BYTE_DET 0x3 // Selects the Am4701 byte-detect register. (Not + // normally used except in diagnostics.) +#define SEL_OUTMAIL 0x4 // Selects the outbound mailbox (R/W). Reading back + // a value of zero indicates that the mailbox has + // been read by the board and is available for more + // data./ Writing to the mailbox optionally + // interrupts the board, depending on the loadware's + // setting of its interrupt mask register. +#define SEL_AEAF 0x5 // Selects AE/AF threshold register. +#define SEL_INMAIL 0x6 // Selects the inbound mailbox (Read) + +//------------------------------------------------------------------------------ +// IntelliPort-IIEX -- Write Only: interrupt mask (and misc flags) register: +// Unlike IntelliPort-II, bit assignments do NOT match those of the status +// register. +// +#define FIFO_MASK 0x2 + +// Mailbox readback select: +// If set, reads to FIFO_MAIL will read the OUTBOUND mailbox (host to board). If +// clear (default on reset) reads to FIFO_MAIL will read the INBOUND mailbox. +// This is the normal situation. The clearing of a mailbox is determined on +// -IIEX boards by waiting for the STE_OUT_MAIL bit to clear. Readback +// capability is provided for diagnostic purposes only. +// +#define MX_OUTMAIL_RSEL 0x80 + +#define MX_IN_MAIL 0x40 // Enables interrupts when incoming mailbox goes + // full (ST_IN_MAIL set). +#define MX_IN_FULL 0x20 // Enables interrupts when incoming FIFO goes full + // (STE_IN_FULL). +#define MX_IN_MT 0x08 // Enables interrupts when incoming FIFO goes empty + // (ST_IN_MT). +#define MX_OUT_FULL 0x04 // Enables interrupts when outgoing FIFO goes full + // (ST_OUT_FULL). +#define MX_OUT_MT 0x01 // Enables interrupts when outgoing FIFO goes empty + // (STE_OUT_MT). + +// Any remaining bits are reserved, and should be written to ZERO for +// compatibility with future Computone products. + +//------------------------------------------------------------------------------ +// IntelliPort-IIEX: -- These are only 6-bit mailboxes !!! -- 11111100 (low two +// bits always read back 0). +// Read: One of the mailboxes, usually Inbound. +// Inbound Mailbox (MX_OUTMAIL_RSEL = 0) +// Outbound Mailbox (MX_OUTMAIL_RSEL = 1) +// Write: Outbound Mailbox +// For the IntelliPort-II boards, the outbound mailbox is read back to determine +// whether the board has read the data (0 --> data has been read). For the +// IntelliPort-IIEX, this is done by reading a status register. To determine +// whether mailbox is available for more outbound data, use the STE_OUT_MAIL bit +// in FIFO_STATUS. Moreover, although the Outbound Mailbox can be read back by +// setting MX_OUTMAIL_RSEL, it is NOT cleared when the board reads it, as is the +// case with the -II boards. For this reason, FIFO_MAIL is normally used to read +// the inbound FIFO, and MX_OUTMAIL_RSEL kept clear. (See above for +// MX_OUTMAIL_RSEL description.) +// +#define FIFO_MAIL 0x3 + +//------------------------------------------------------------------------------ +// WRITE ONLY: Resets the board. (Data doesn't matter). +// +#define FIFO_RESET 0x7 + +//------------------------------------------------------------------------------ +// READ ONLY: Will have no effect. (Data is undefined.) +// Actually, there will be an effect, in that the operation is sure to generate +// a bus cycle: viz., an I/O byte Read. This fact can be used to enforce short +// delays when no comparable time constant is available. +// +#define FIFO_NOP 0x7 + +//------------------------------------------------------------------------------ +// RESET & POWER-ON RESET MESSAGE +/*------------------------------------------------------------------------------ +RESET: + +The IntelliPort-II and -IIEX boards are reset in three ways: Power-up, channel +reset, and via a write to the reset register described above. For products using +the ISA bus, these three sources of reset are equvalent. For MCA and EISA buses, +the Power-up and channel reset sources cause additional hardware initialization +which should only occur at system startup time. + +The third type of reset, called a "command reset", is done by writing any data +to the FIFO_RESET address described above. This resets the on-board processor, +FIFO, UARTS, and associated hardware. + +This passes control of the board to the bootstrap firmware, which performs a +Power-On Self Test and which detects its current configuration. For example, +-IIEX products determine the size of FIFO which has been installed, and the +number and type of expansion boxes attached. + +This and other information is then written to the FIFO in a 16-byte data block +to be read by the host. This block is guaranteed to be present within two (2) +seconds of having received the command reset. The firmware is now ready to +receive loadware from the host. + +It is good practice to perform a command reset to the board explicitly as part +of your software initialization. This allows your code to properly restart from +a soft boot. (Many systems do not issue channel reset on soft boot). + +Because of a hardware reset problem on some of the Cirrus Logic 1400's which are +used on the product, it is recommended that you reset the board twice, separated +by an approximately 50 milliseconds delay. (VERY approximately: probably ok to +be off by a factor of five. The important point is that the first command reset +in fact generates a reset pulse on the board. This pulse is guaranteed to last +less than 10 milliseconds. The additional delay ensures the 1400 has had the +chance to respond sufficiently to the first reset. Why not a longer delay? Much +more than 50 milliseconds gets to be noticable, but the board would still work. + +Once all 16 bytes of the Power-on Reset Message have been read, the bootstrap +firmware is ready to receive loadware. + +Note on Power-on Reset Message format: +The various fields have been designed with future expansion in view. +Combinations of bitfields and values have been defined which define products +which may not currently exist. This has been done to allow drivers to anticipate +the possible introduction of products in a systematic fashion. This is not +intended to suggest that each potential product is actually under consideration. +------------------------------------------------------------------------------*/ + +//---------------------------------------- +// Format of Power-on Reset Message +//---------------------------------------- + +typedef union _porStr // "por" stands for Power On Reset +{ + unsigned char c[16]; // array used when considering the message as a + // string of undifferentiated characters + + struct // Elements used when considering values + { + // The first two bytes out of the FIFO are two magic numbers. These are + // intended to establish that there is indeed a member of the + // IntelliPort-II(EX) family present. The remaining bytes may be + // expected // to be valid. When reading the Power-on Reset message, + // if the magic numbers do not match it is probably best to stop + // reading immediately. You are certainly not reading our board (unless + // hardware is faulty), and may in fact be reading some other piece of + // hardware. + + unsigned char porMagic1; // magic number: first byte == POR_MAGIC_1 + unsigned char porMagic2; // magic number: second byte == POR_MAGIC_2 + + // The Version, Revision, and Subrevision are stored as absolute numbers + // and would normally be displayed in the format V.R.S (e.g. 1.0.2) + + unsigned char porVersion; // Bootstrap firmware version number + unsigned char porRevision; // Bootstrap firmware revision number + unsigned char porSubRev; // Bootstrap firmware sub-revision number + + unsigned char porID; // Product ID: Bit-mapped according to + // conventions described below. Among other + // things, this allows us to distinguish + // IntelliPort-II boards from IntelliPort-IIEX + // boards. + + unsigned char porBus; // IntelliPort-II: Unused + // IntelliPort-IIEX: Bus Information: + // Bit-mapped below + + unsigned char porMemory; // On-board DRAM size: in 32k blocks + + // porPorts1 (and porPorts2) are used to determine the ports which are + // available to the board. For non-expandable product, a single number + // is sufficient. For expandable product, the board may be connected + // to as many as four boxes. Each box may be (so far) either a 16-port + // or an 8-port size. Whenever an 8-port box is used, the remaining 8 + // ports leave gaps between existing channels. For that reason, + // expandable products must report a MAP of available channels. Since + // each UART supports four ports, we represent each UART found by a + // single bit. Using two bytes to supply the mapping information we + // report the presense or absense of up to 16 UARTS, or 64 ports in + // steps of 4 ports. For -IIEX products, the ports are numbered + // starting at the box closest to the controller in the "chain". + + // Interpreted Differently for IntelliPort-II and -IIEX. + // -II: Number of ports (Derived actually from product ID). See + // Diag1&2 to indicate if uart was actually detected. + // -IIEX: Bit-map of UARTS found, LSB (see below for MSB of this). This + // bitmap is based on detecting the uarts themselves; + // see porFlags for information from the box i.d's. + unsigned char porPorts1; + + unsigned char porDiag1; // Results of on-board P.O.S.T, 1st byte + unsigned char porDiag2; // Results of on-board P.O.S.T, 2nd byte + unsigned char porSpeed; // Speed of local CPU: given as MHz x10 + // e.g., 16.0 MHz CPU is reported as 160 + unsigned char porFlags; // Misc information (see manifests below) + // Bit-mapped: CPU type, UART's present + + unsigned char porPorts2; // -II: Undefined + // -IIEX: Bit-map of UARTS found, MSB (see + // above for LSB) + + // IntelliPort-II: undefined + // IntelliPort-IIEX: 1 << porFifoSize gives the size, in bytes, of the + // host interface FIFO, in each direction. When running the -IIEX in + // 8-bit mode, fifo capacity is halved. The bootstrap firmware will + // have already accounted for this fact in generating this number. + unsigned char porFifoSize; + + // IntelliPort-II: undefined + // IntelliPort-IIEX: The number of boxes connected. (Presently 1-4) + unsigned char porNumBoxes; + } e; +} porStr, *porStrPtr; + +//-------------------------- +// Values for porStr fields +//-------------------------- + +//--------------------- +// porMagic1, porMagic2 +//---------------------- +// +#define POR_MAGIC_1 0x96 // The only valid value for porMagic1 +#define POR_MAGIC_2 0x35 // The only valid value for porMagic2 +#define POR_1_INDEX 0 // Byte position of POR_MAGIC_1 +#define POR_2_INDEX 1 // Ditto for POR_MAGIC_2 + +//---------------------- +// porID +//---------------------- +// +#define POR_ID_FAMILY 0xc0 // These bits indicate the general family of + // product. +#define POR_ID_FII 0x00 // Family is "IntelliPort-II" +#define POR_ID_FIIEX 0x40 // Family is "IntelliPort-IIEX" + +// These bits are reserved, presently zero. May be used at a later date to +// convey other product information. +// +#define POR_ID_RESERVED 0x3c + +#define POR_ID_SIZE 0x03 // Remaining bits indicate number of ports & + // Connector information. +#define POR_ID_II_8 0x00 // For IntelliPort-II, indicates 8-port using + // standard brick. +#define POR_ID_II_8R 0x01 // For IntelliPort-II, indicates 8-port using + // RJ11's (no CTS) +#define POR_ID_II_6 0x02 // For IntelliPort-II, indicates 6-port using + // RJ45's +#define POR_ID_II_4 0x03 // For IntelliPort-II, indicates 4-port using + // 4xRJ45 connectors +#define POR_ID_EX 0x00 // For IntelliPort-IIEX, indicates standard + // expandable controller (other values reserved) + +//---------------------- +// porBus +//---------------------- + +// IntelliPort-IIEX only: Board is installed in a 16-bit slot +// +#define POR_BUS_SLOT16 0x20 + +// IntelliPort-IIEX only: DIP switch #8 is on, selecting 16-bit host interface +// operation. +// +#define POR_BUS_DIP16 0x10 + +// Bits 0-2 indicate type of bus: This information is stored in the bootstrap +// loadware, different loadware being used on different products for different +// buses. For most situations, the drivers do not need this information; but it +// is handy in a diagnostic environment. For example, on microchannel boards, +// you would not want to try to test several interrupts, only the one for which +// you were configured. +// +#define POR_BUS_TYPE 0x07 + +// Unknown: this product doesn't know what bus it is running in. (e.g. if same +// bootstrap firmware were wanted for two different buses.) +// +#define POR_BUS_T_UNK 0 + +// Note: existing firmware for ISA-8 and MC-8 currently report the POR_BUS_T_UNK +// state, since the same bootstrap firmware is used for each. + +#define POR_BUS_T_MCA 1 // MCA BUS */ +#define POR_BUS_T_EISA 2 // EISA BUS */ +#define POR_BUS_T_ISA 3 // ISA BUS */ + +// Values 4-7 Reserved + +// Remaining bits are reserved + +//---------------------- +// porDiag1 +//---------------------- + +#define POR_BAD_MAPPER 0x80 // HW failure on P.O.S.T: Chip mapper failed + +// These two bits valid only for the IntelliPort-II +// +#define POR_BAD_UART1 0x01 // First 1400 bad +#define POR_BAD_UART2 0x02 // Second 1400 bad + +//---------------------- +// porDiag2 +//---------------------- + +#define POR_DEBUG_PORT 0x80 // debug port was detected by the P.O.S.T +#define POR_DIAG_OK 0x00 // Indicates passage: Failure codes not yet + // available. + // Other bits undefined. +//---------------------- +// porFlags +//---------------------- + +#define POR_CPU 0x03 // These bits indicate supposed CPU type +#define POR_CPU_8 0x01 // Board uses an 80188 (no such thing yet) +#define POR_CPU_6 0x02 // Board uses an 80186 (all existing products) +#define POR_CEX4 0x04 // If set, this is an ISA-CEX/4: An ISA-4 (asic) + // which is architected like an ISA-CEX connected + // to a (hitherto impossible) 4-port box. +#define POR_BOXES 0xf0 // Valid for IntelliPort-IIEX only: Map of Box + // sizes based on box I.D. +#define POR_BOX_16 0x10 // Set indicates 16-port, clear 8-port + +//------------------------------------- +// LOADWARE and DOWNLOADING CODE +//------------------------------------- + +/* +Loadware may be sent to the board in two ways: +1) It may be read from a (binary image) data file block by block as each block + is sent to the board. This is only possible when the initialization is + performed by code which can access your file system. This is most suitable + for diagnostics and appications which use the interface library directly. + +2) It may be hard-coded into your source by including a .h file (typically + supplied by Computone), which declares a data array and initializes every + element. This achieves the same result as if an entire loadware file had + been read into the array. + + This requires more data space in your program, but access to the file system + is not required. This method is more suited to driver code, which typically + is running at a level too low to access the file system directly. + +At present, loadware can only be generated at Computone. + +All Loadware begins with a header area which has a particular format. This +includes a magic number which identifies the file as being (purportedly) +loadware, CRC (for the loader), and version information. +*/ + + +//----------------------------------------------------------------------------- +// Format of loadware block +// +// This is defined as a union so we can pass a pointer to one of these items +// and (if it is the first block) pick out the version information, etc. +// +// Otherwise, to deal with this as a simple character array +//------------------------------------------------------------------------------ + +#define LOADWARE_BLOCK_SIZE 512 // Number of bytes in each block of loadware + +typedef union _loadHdrStr +{ + unsigned char c[LOADWARE_BLOCK_SIZE]; // Valid for every block + + struct // These fields are valid for only the first block of loadware. + { + unsigned char loadMagic; // Magic number: see below + unsigned char loadBlocksMore; // How many more blocks? + unsigned char loadCRC[2]; // Two CRC bytes: used by loader + unsigned char loadVersion; // Version number + unsigned char loadRevision; // Revision number + unsigned char loadSubRevision; // Sub-revision number + unsigned char loadSpares[9]; // Presently unused + unsigned char loadDates[32]; // Null-terminated string which can give + // date and time of compilation + } e; +} loadHdrStr, *loadHdrStrPtr; + +//------------------------------------ +// Defines for downloading code: +//------------------------------------ + +// The loadMagic field in the first block of the loadfile must be this, else the +// file is not valid. +// +#define MAGIC_LOADFILE 0x3c + +// How do we know the load was successful? On completion of the load, the +// bootstrap firmware returns a code to indicate whether it thought the download +// was valid and intends to execute it. These are the only possible valid codes: +// +#define LOADWARE_OK 0xc3 // Download was ok +#define LOADWARE_BAD 0x5a // Download was bad (CRC error) + +// Constants applicable to writing blocks of loadware: +// The first block of loadware might take 600 mS to load, in extreme cases. +// (Expandable board: worst case for sending startup messages to the LCD's). +// The 600mS figure is not really a calculation, but a conservative +// guess/guarantee. Usually this will be within 100 mS, like subsequent blocks. +// +#define MAX_DLOAD_START_TIME 1000 // 1000 mS +#define MAX_DLOAD_READ_TIME 100 // 100 mS + +// Firmware should respond with status (see above) within this long of host +// having sent the final block. +// +#define MAX_DLOAD_ACK_TIME 100 // 100 mS, again! + +//------------------------------------------------------ +// MAXIMUM NUMBER OF PORTS PER BOARD: +// This is fixed for now (with the expandable), but may +// be expanding according to even newer products. +//------------------------------------------------------ +// +#define ABS_MAX_BOXES 4 // Absolute most boxes per board +#define ABS_BIGGEST_BOX 16 // Absolute the most ports per box +#define ABS_MOST_PORTS (ABS_MAX_BOXES * ABS_BIGGEST_BOX) + +#define I2_OUTSW(port, addr, count) outsw((port), (addr), (((count)+1)/2)) +#define I2_OUTSB(port, addr, count) outsb((port), (addr), (((count)+1))&-2) +#define I2_INSW(port, addr, count) insw((port), (addr), (((count)+1)/2)) +#define I2_INSB(port, addr, count) insb((port), (addr), (((count)+1))&-2) + +#endif // I2HW_H + diff --git a/drivers/staging/tty/ip2/i2lib.c b/drivers/staging/tty/ip2/i2lib.c new file mode 100644 index 000000000000..0d10b89218ed --- /dev/null +++ b/drivers/staging/tty/ip2/i2lib.c @@ -0,0 +1,2214 @@ +/******************************************************************************* +* +* (c) 1999 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport +* serial I/O controllers. +* +* DESCRIPTION: High-level interface code for the device driver. Uses the +* Extremely Low Level Interface Support (i2ellis.c). Provides an +* interface to the standard loadware, to support drivers or +* application code. (This is included source code, not a separate +* compilation module.) +* +*******************************************************************************/ +//------------------------------------------------------------------------------ +// Note on Strategy: +// Once the board has been initialized, it will interrupt us when: +// 1) It has something in the fifo for us to read (incoming data, flow control +// packets, or whatever). +// 2) It has stripped whatever we have sent last time in the FIFO (and +// consequently is ready for more). +// +// Note also that the buffer sizes declared in i2lib.h are VERY SMALL. This +// worsens performance considerably, but is done so that a great many channels +// might use only a little memory. +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +// Revision History: +// +// 0.00 - 4/16/91 --- First Draft +// 0.01 - 4/29/91 --- 1st beta release +// 0.02 - 6/14/91 --- Changes to allow small model compilation +// 0.03 - 6/17/91 MAG Break reporting protected from interrupts routines with +// in-line asm added for moving data to/from ring buffers, +// replacing a variety of methods used previously. +// 0.04 - 6/21/91 MAG Initial flow-control packets not queued until +// i2_enable_interrupts time. Former versions would enqueue +// them at i2_init_channel time, before we knew how many +// channels were supposed to exist! +// 0.05 - 10/12/91 MAG Major changes: works through the ellis.c routines now; +// supports new 16-bit protocol and expandable boards. +// - 10/24/91 MAG Most changes in place and stable. +// 0.06 - 2/20/92 MAG Format of CMD_HOTACK corrected: the command takes no +// argument. +// 0.07 -- 3/11/92 MAG Support added to store special packet types at interrupt +// level (mostly responses to specific commands.) +// 0.08 -- 3/30/92 MAG Support added for STAT_MODEM packet +// 0.09 -- 6/24/93 MAG i2Link... needed to update number of boards BEFORE +// turning on the interrupt. +// 0.10 -- 6/25/93 MAG To avoid gruesome death from a bad board, we sanity check +// some incoming. +// +// 1.1 - 12/25/96 AKM Linux version. +// - 10/09/98 DMC Revised Linux version. +//------------------------------------------------------------------------------ + +//************ +//* Includes * +//************ + +#include +#include "i2lib.h" + + +//*********************** +//* Function Prototypes * +//*********************** +static void i2QueueNeeds(i2eBordStrPtr, i2ChanStrPtr, int); +static i2ChanStrPtr i2DeQueueNeeds(i2eBordStrPtr, int ); +static void i2StripFifo(i2eBordStrPtr); +static void i2StuffFifoBypass(i2eBordStrPtr); +static void i2StuffFifoFlow(i2eBordStrPtr); +static void i2StuffFifoInline(i2eBordStrPtr); +static int i2RetryFlushOutput(i2ChanStrPtr); + +// Not a documented part of the library routines (careful...) but the Diagnostic +// i2diag.c finds them useful to help the throughput in certain limited +// single-threaded operations. +static void iiSendPendingMail(i2eBordStrPtr); +static void serviceOutgoingFifo(i2eBordStrPtr); + +// Functions defined in ip2.c as part of interrupt handling +static void do_input(struct work_struct *); +static void do_status(struct work_struct *); + +//*************** +//* Debug Data * +//*************** +#ifdef DEBUG_FIFO + +unsigned char DBGBuf[0x4000]; +unsigned short I = 0; + +static void +WriteDBGBuf(char *s, unsigned char *src, unsigned short n ) +{ + char *p = src; + + // XXX: We need a spin lock here if we ever use this again + + while (*s) { // copy label + DBGBuf[I] = *s++; + I = I++ & 0x3fff; + } + while (n--) { // copy data + DBGBuf[I] = *p++; + I = I++ & 0x3fff; + } +} + +static void +fatality(i2eBordStrPtr pB ) +{ + int i; + + for (i=0;i= ' ' && DBGBuf[i] <= '~') { + printk(" %c ",DBGBuf[i]); + } else { + printk(" . "); + } + } + printk("\n"); + printk("Last index %x\n",I); +} +#endif /* DEBUG_FIFO */ + +//******** +//* Code * +//******** + +static inline int +i2Validate ( i2ChanStrPtr pCh ) +{ + //ip2trace(pCh->port_index, ITRC_VERIFY,ITRC_ENTER,2,pCh->validity, + // (CHANNEL_MAGIC | CHANNEL_SUPPORT)); + return ((pCh->validity & (CHANNEL_MAGIC_BITS | CHANNEL_SUPPORT)) + == (CHANNEL_MAGIC | CHANNEL_SUPPORT)); +} + +static void iiSendPendingMail_t(unsigned long data) +{ + i2eBordStrPtr pB = (i2eBordStrPtr)data; + + iiSendPendingMail(pB); +} + +//****************************************************************************** +// Function: iiSendPendingMail(pB) +// Parameters: Pointer to a board structure +// Returns: Nothing +// +// Description: +// If any outgoing mail bits are set and there is outgoing mailbox is empty, +// send the mail and clear the bits. +//****************************************************************************** +static void +iiSendPendingMail(i2eBordStrPtr pB) +{ + if (pB->i2eOutMailWaiting && (!pB->i2eWaitingForEmptyFifo) ) + { + if (iiTrySendMail(pB, pB->i2eOutMailWaiting)) + { + /* If we were already waiting for fifo to empty, + * or just sent MB_OUT_STUFFED, then we are + * still waiting for it to empty, until we should + * receive an MB_IN_STRIPPED from the board. + */ + pB->i2eWaitingForEmptyFifo |= + (pB->i2eOutMailWaiting & MB_OUT_STUFFED); + pB->i2eOutMailWaiting = 0; + pB->SendPendingRetry = 0; + } else { +/* The only time we hit this area is when "iiTrySendMail" has + failed. That only occurs when the outbound mailbox is + still busy with the last message. We take a short breather + to let the board catch up with itself and then try again. + 16 Retries is the limit - then we got a borked board. + /\/\|=mhw=|\/\/ */ + + if( ++pB->SendPendingRetry < 16 ) { + setup_timer(&pB->SendPendingTimer, + iiSendPendingMail_t, (unsigned long)pB); + mod_timer(&pB->SendPendingTimer, jiffies + 1); + } else { + printk( KERN_ERR "IP2: iiSendPendingMail unable to queue outbound mail\n" ); + } + } + } +} + +//****************************************************************************** +// Function: i2InitChannels(pB, nChannels, pCh) +// Parameters: Pointer to Ellis Board structure +// Number of channels to initialize +// Pointer to first element in an array of channel structures +// Returns: Success or failure +// +// Description: +// +// This function patches pointers, back-pointers, and initializes all the +// elements in the channel structure array. +// +// This should be run after the board structure is initialized, through having +// loaded the standard loadware (otherwise it complains). +// +// In any case, it must be done before any serious work begins initializing the +// irq's or sending commands... +// +//****************************************************************************** +static int +i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh) +{ + int index, stuffIndex; + i2ChanStrPtr *ppCh; + + if (pB->i2eValid != I2E_MAGIC) { + I2_COMPLETE(pB, I2EE_BADMAGIC); + } + if (pB->i2eState != II_STATE_STDLOADED) { + I2_COMPLETE(pB, I2EE_BADSTATE); + } + + rwlock_init(&pB->read_fifo_spinlock); + rwlock_init(&pB->write_fifo_spinlock); + rwlock_init(&pB->Dbuf_spinlock); + rwlock_init(&pB->Bbuf_spinlock); + rwlock_init(&pB->Fbuf_spinlock); + + // NO LOCK needed yet - this is init + + pB->i2eChannelPtr = pCh; + pB->i2eChannelCnt = nChannels; + + pB->i2Fbuf_strip = pB->i2Fbuf_stuff = 0; + pB->i2Dbuf_strip = pB->i2Dbuf_stuff = 0; + pB->i2Bbuf_strip = pB->i2Bbuf_stuff = 0; + + pB->SendPendingRetry = 0; + + memset ( pCh, 0, sizeof (i2ChanStr) * nChannels ); + + for (index = stuffIndex = 0, ppCh = (i2ChanStrPtr *)(pB->i2Fbuf); + nChannels && index < ABS_MOST_PORTS; + index++) + { + if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) { + continue; + } + rwlock_init(&pCh->Ibuf_spinlock); + rwlock_init(&pCh->Obuf_spinlock); + rwlock_init(&pCh->Cbuf_spinlock); + rwlock_init(&pCh->Pbuf_spinlock); + // NO LOCK needed yet - this is init + // Set up validity flag according to support level + if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) { + pCh->validity = CHANNEL_MAGIC | CHANNEL_SUPPORT; + } else { + pCh->validity = CHANNEL_MAGIC; + } + pCh->pMyBord = pB; /* Back-pointer */ + + // Prepare an outgoing flow-control packet to send as soon as the chance + // occurs. + if ( pCh->validity & CHANNEL_SUPPORT ) { + pCh->infl.hd.i2sChannel = index; + pCh->infl.hd.i2sCount = 5; + pCh->infl.hd.i2sType = PTYPE_BYPASS; + pCh->infl.fcmd = 37; + pCh->infl.asof = 0; + pCh->infl.room = IBUF_SIZE - 1; + + pCh->whenSendFlow = (IBUF_SIZE/5)*4; // when 80% full + + // The following is similar to calling i2QueueNeeds, except that this + // is done in longhand, since we are setting up initial conditions on + // many channels at once. + pCh->channelNeeds = NEED_FLOW; // Since starting from scratch + pCh->sinceLastFlow = 0; // No bytes received since last flow + // control packet was queued + stuffIndex++; + *ppCh++ = pCh; // List this channel as needing + // initial flow control packet sent + } + + // Don't allow anything to be sent until the status packets come in from + // the board. + + pCh->outfl.asof = 0; + pCh->outfl.room = 0; + + // Initialize all the ring buffers + + pCh->Ibuf_stuff = pCh->Ibuf_strip = 0; + pCh->Obuf_stuff = pCh->Obuf_strip = 0; + pCh->Cbuf_stuff = pCh->Cbuf_strip = 0; + + memset( &pCh->icount, 0, sizeof (struct async_icount) ); + pCh->hotKeyIn = HOT_CLEAR; + pCh->channelOptions = 0; + pCh->bookMarks = 0; + init_waitqueue_head(&pCh->pBookmarkWait); + + init_waitqueue_head(&pCh->open_wait); + init_waitqueue_head(&pCh->close_wait); + init_waitqueue_head(&pCh->delta_msr_wait); + + // Set base and divisor so default custom rate is 9600 + pCh->BaudBase = 921600; // MAX for ST654, changed after we get + pCh->BaudDivisor = 96; // the boxids (UART types) later + + pCh->dataSetIn = 0; + pCh->dataSetOut = 0; + + pCh->wopen = 0; + pCh->throttled = 0; + + pCh->speed = CBR_9600; + + pCh->flags = 0; + + pCh->ClosingDelay = 5*HZ/10; + pCh->ClosingWaitTime = 30*HZ; + + // Initialize task queue objects + INIT_WORK(&pCh->tqueue_input, do_input); + INIT_WORK(&pCh->tqueue_status, do_status); + +#ifdef IP2DEBUG_TRACE + pCh->trace = ip2trace; +#endif + + ++pCh; + --nChannels; + } + // No need to check for wrap here; this is initialization. + pB->i2Fbuf_stuff = stuffIndex; + I2_COMPLETE(pB, I2EE_GOOD); + +} + +//****************************************************************************** +// Function: i2DeQueueNeeds(pB, type) +// Parameters: Pointer to a board structure +// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW +// Returns: +// Pointer to a channel structure +// +// Description: Returns pointer struct of next channel that needs service of +// the type specified. Otherwise returns a NULL reference. +// +//****************************************************************************** +static i2ChanStrPtr +i2DeQueueNeeds(i2eBordStrPtr pB, int type) +{ + unsigned short queueIndex; + unsigned long flags; + + i2ChanStrPtr pCh = NULL; + + switch(type) { + + case NEED_INLINE: + + write_lock_irqsave(&pB->Dbuf_spinlock, flags); + if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip) + { + queueIndex = pB->i2Dbuf_strip; + pCh = pB->i2Dbuf[queueIndex]; + queueIndex++; + if (queueIndex >= CH_QUEUE_SIZE) { + queueIndex = 0; + } + pB->i2Dbuf_strip = queueIndex; + pCh->channelNeeds &= ~NEED_INLINE; + } + write_unlock_irqrestore(&pB->Dbuf_spinlock, flags); + break; + + case NEED_BYPASS: + + write_lock_irqsave(&pB->Bbuf_spinlock, flags); + if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip) + { + queueIndex = pB->i2Bbuf_strip; + pCh = pB->i2Bbuf[queueIndex]; + queueIndex++; + if (queueIndex >= CH_QUEUE_SIZE) { + queueIndex = 0; + } + pB->i2Bbuf_strip = queueIndex; + pCh->channelNeeds &= ~NEED_BYPASS; + } + write_unlock_irqrestore(&pB->Bbuf_spinlock, flags); + break; + + case NEED_FLOW: + + write_lock_irqsave(&pB->Fbuf_spinlock, flags); + if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip) + { + queueIndex = pB->i2Fbuf_strip; + pCh = pB->i2Fbuf[queueIndex]; + queueIndex++; + if (queueIndex >= CH_QUEUE_SIZE) { + queueIndex = 0; + } + pB->i2Fbuf_strip = queueIndex; + pCh->channelNeeds &= ~NEED_FLOW; + } + write_unlock_irqrestore(&pB->Fbuf_spinlock, flags); + break; + default: + printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type); + break; + } + return pCh; +} + +//****************************************************************************** +// Function: i2QueueNeeds(pB, pCh, type) +// Parameters: Pointer to a board structure +// Pointer to a channel structure +// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW +// Returns: Nothing +// +// Description: +// For each type of need selected, if the given channel is not already in the +// queue, adds it, and sets the flag indicating it is in the queue. +//****************************************************************************** +static void +i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type) +{ + unsigned short queueIndex; + unsigned long flags; + + // We turn off all the interrupts during this brief process, since the + // interrupt-level code might want to put things on the queue as well. + + switch (type) { + + case NEED_INLINE: + + write_lock_irqsave(&pB->Dbuf_spinlock, flags); + if ( !(pCh->channelNeeds & NEED_INLINE) ) + { + pCh->channelNeeds |= NEED_INLINE; + queueIndex = pB->i2Dbuf_stuff; + pB->i2Dbuf[queueIndex++] = pCh; + if (queueIndex >= CH_QUEUE_SIZE) + queueIndex = 0; + pB->i2Dbuf_stuff = queueIndex; + } + write_unlock_irqrestore(&pB->Dbuf_spinlock, flags); + break; + + case NEED_BYPASS: + + write_lock_irqsave(&pB->Bbuf_spinlock, flags); + if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS)) + { + pCh->channelNeeds |= NEED_BYPASS; + queueIndex = pB->i2Bbuf_stuff; + pB->i2Bbuf[queueIndex++] = pCh; + if (queueIndex >= CH_QUEUE_SIZE) + queueIndex = 0; + pB->i2Bbuf_stuff = queueIndex; + } + write_unlock_irqrestore(&pB->Bbuf_spinlock, flags); + break; + + case NEED_FLOW: + + write_lock_irqsave(&pB->Fbuf_spinlock, flags); + if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW)) + { + pCh->channelNeeds |= NEED_FLOW; + queueIndex = pB->i2Fbuf_stuff; + pB->i2Fbuf[queueIndex++] = pCh; + if (queueIndex >= CH_QUEUE_SIZE) + queueIndex = 0; + pB->i2Fbuf_stuff = queueIndex; + } + write_unlock_irqrestore(&pB->Fbuf_spinlock, flags); + break; + + case NEED_CREDIT: + pCh->channelNeeds |= NEED_CREDIT; + break; + default: + printk(KERN_ERR "i2QueueNeeds called with bad type:%x\n",type); + break; + } + return; +} + +//****************************************************************************** +// Function: i2QueueCommands(type, pCh, timeout, nCommands, pCs,...) +// Parameters: type - PTYPE_BYPASS or PTYPE_INLINE +// pointer to the channel structure +// maximum period to wait +// number of commands (n) +// n commands +// Returns: Number of commands sent, or -1 for error +// +// get board lock before calling +// +// Description: +// Queues up some commands to be sent to a channel. To send possibly several +// bypass or inline commands to the given channel. The timeout parameter +// indicates how many HUNDREDTHS OF SECONDS to wait until there is room: +// 0 = return immediately if no room, -ive = wait forever, +ive = number of +// 1/100 seconds to wait. Return values: +// -1 Some kind of nasty error: bad channel structure or invalid arguments. +// 0 No room to send all the commands +// (+) Number of commands sent +//****************************************************************************** +static int +i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands, + cmdSyntaxPtr pCs0,...) +{ + int totalsize = 0; + int blocksize; + int lastended; + cmdSyntaxPtr *ppCs; + cmdSyntaxPtr pCs; + int count; + int flag; + i2eBordStrPtr pB; + + unsigned short maxBlock; + unsigned short maxBuff; + short bufroom; + unsigned short stuffIndex; + unsigned char *pBuf; + unsigned char *pInsert; + unsigned char *pDest, *pSource; + unsigned short channel; + int cnt; + unsigned long flags = 0; + rwlock_t *lock_var_p = NULL; + + // Make sure the channel exists, otherwise do nothing + if ( !i2Validate ( pCh ) ) { + return -1; + } + + ip2trace (CHANN, ITRC_QUEUE, ITRC_ENTER, 0 ); + + pB = pCh->pMyBord; + + // Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT + if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == I2_IRQ_UNDEFINED) + return -2; + // If the board has gone fatal, return bad, and also hit the trap routine if + // it exists. + if (pB->i2eFatal) { + if ( pB->i2eFatalTrap ) { + (*(pB)->i2eFatalTrap)(pB); + } + return -3; + } + // Set up some variables, Which buffers are we using? How big are they? + switch(type) + { + case PTYPE_INLINE: + flag = INL; + maxBlock = MAX_OBUF_BLOCK; + maxBuff = OBUF_SIZE; + pBuf = pCh->Obuf; + break; + case PTYPE_BYPASS: + flag = BYP; + maxBlock = MAX_CBUF_BLOCK; + maxBuff = CBUF_SIZE; + pBuf = pCh->Cbuf; + break; + default: + return -4; + } + // Determine the total size required for all the commands + totalsize = blocksize = sizeof(i2CmdHeader); + lastended = 0; + ppCs = &pCs0; + for ( count = nCommands; count; count--, ppCs++) + { + pCs = *ppCs; + cnt = pCs->length; + // Will a new block be needed for this one? + // Two possible reasons: too + // big or previous command has to be at the end of a packet. + if ((blocksize + cnt > maxBlock) || lastended) { + blocksize = sizeof(i2CmdHeader); + totalsize += sizeof(i2CmdHeader); + } + totalsize += cnt; + blocksize += cnt; + + // If this command had to end a block, then we will make sure to + // account for it should there be any more blocks. + lastended = pCs->flags & END; + } + for (;;) { + // Make sure any pending flush commands go out before we add more data. + if ( !( pCh->flush_flags && i2RetryFlushOutput( pCh ) ) ) { + // How much room (this time through) ? + switch(type) { + case PTYPE_INLINE: + lock_var_p = &pCh->Obuf_spinlock; + write_lock_irqsave(lock_var_p, flags); + stuffIndex = pCh->Obuf_stuff; + bufroom = pCh->Obuf_strip - stuffIndex; + break; + case PTYPE_BYPASS: + lock_var_p = &pCh->Cbuf_spinlock; + write_lock_irqsave(lock_var_p, flags); + stuffIndex = pCh->Cbuf_stuff; + bufroom = pCh->Cbuf_strip - stuffIndex; + break; + default: + return -5; + } + if (--bufroom < 0) { + bufroom += maxBuff; + } + + ip2trace (CHANN, ITRC_QUEUE, 2, 1, bufroom ); + + // Check for overflow + if (totalsize <= bufroom) { + // Normal Expected path - We still hold LOCK + break; /* from for()- Enough room: goto proceed */ + } + ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize); + write_unlock_irqrestore(lock_var_p, flags); + } else + ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize); + + /* Prepare to wait for buffers to empty */ + serviceOutgoingFifo(pB); // Dump what we got + + if (timeout == 0) { + return 0; // Tired of waiting + } + if (timeout > 0) + timeout--; // So negative values == forever + + if (!in_interrupt()) { + schedule_timeout_interruptible(1); // short nap + } else { + // we cannot sched/sleep in interrupt silly + return 0; + } + if (signal_pending(current)) { + return 0; // Wake up! Time to die!!! + } + + ip2trace (CHANN, ITRC_QUEUE, 4, 0 ); + + } // end of for(;;) + + // At this point we have room and the lock - stick them in. + channel = pCh->infl.hd.i2sChannel; + pInsert = &pBuf[stuffIndex]; // Pointer to start of packet + pDest = CMD_OF(pInsert); // Pointer to start of command + + // When we start counting, the block is the size of the header + for (blocksize = sizeof(i2CmdHeader), count = nCommands, + lastended = 0, ppCs = &pCs0; + count; + count--, ppCs++) + { + pCs = *ppCs; // Points to command protocol structure + + // If this is a bookmark request command, post the fact that a bookmark + // request is pending. NOTE THIS TRICK ONLY WORKS BECAUSE CMD_BMARK_REQ + // has no parameters! The more general solution would be to reference + // pCs->cmd[0]. + if (pCs == CMD_BMARK_REQ) { + pCh->bookMarks++; + + ip2trace (CHANN, ITRC_DRAIN, 30, 1, pCh->bookMarks ); + + } + cnt = pCs->length; + + // If this command would put us over the maximum block size or + // if the last command had to be at the end of a block, we end + // the existing block here and start a new one. + if ((blocksize + cnt > maxBlock) || lastended) { + + ip2trace (CHANN, ITRC_QUEUE, 5, 0 ); + + PTYPE_OF(pInsert) = type; + CHANNEL_OF(pInsert) = channel; + // count here does not include the header + CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader); + stuffIndex += blocksize; + if(stuffIndex >= maxBuff) { + stuffIndex = 0; + pInsert = pBuf; + } + pInsert = &pBuf[stuffIndex]; // Pointer to start of next pkt + pDest = CMD_OF(pInsert); + blocksize = sizeof(i2CmdHeader); + } + // Now we know there is room for this one in the current block + + blocksize += cnt; // Total bytes in this command + pSource = pCs->cmd; // Copy the command into the buffer + while (cnt--) { + *pDest++ = *pSource++; + } + // If this command had to end a block, then we will make sure to account + // for it should there be any more blocks. + lastended = pCs->flags & END; + } // end for + // Clean up the final block by writing header, etc + + PTYPE_OF(pInsert) = type; + CHANNEL_OF(pInsert) = channel; + // count here does not include the header + CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader); + stuffIndex += blocksize; + if(stuffIndex >= maxBuff) { + stuffIndex = 0; + pInsert = pBuf; + } + // Updates the index, and post the need for service. When adding these to + // the queue of channels, we turn off the interrupt while doing so, + // because at interrupt level we might want to push a channel back to the + // end of the queue. + switch(type) + { + case PTYPE_INLINE: + pCh->Obuf_stuff = stuffIndex; // Store buffer pointer + write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); + + pB->debugInlineQueued++; + // Add the channel pointer to list of channels needing service (first + // come...), if it's not already there. + i2QueueNeeds(pB, pCh, NEED_INLINE); + break; + + case PTYPE_BYPASS: + pCh->Cbuf_stuff = stuffIndex; // Store buffer pointer + write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags); + + pB->debugBypassQueued++; + // Add the channel pointer to list of channels needing service (first + // come...), if it's not already there. + i2QueueNeeds(pB, pCh, NEED_BYPASS); + break; + } + + ip2trace (CHANN, ITRC_QUEUE, ITRC_RETURN, 1, nCommands ); + + return nCommands; // Good status: number of commands sent +} + +//****************************************************************************** +// Function: i2GetStatus(pCh,resetBits) +// Parameters: Pointer to a channel structure +// Bit map of status bits to clear +// Returns: Bit map of current status bits +// +// Description: +// Returns the state of data set signals, and whether a break has been received, +// (see i2lib.h for bit-mapped result). resetBits is a bit-map of any status +// bits to be cleared: I2_BRK, I2_PAR, I2_FRA, I2_OVR,... These are cleared +// AFTER the condition is passed. If pCh does not point to a valid channel, +// returns -1 (which would be impossible otherwise. +//****************************************************************************** +static int +i2GetStatus(i2ChanStrPtr pCh, int resetBits) +{ + unsigned short status; + i2eBordStrPtr pB; + + ip2trace (CHANN, ITRC_STATUS, ITRC_ENTER, 2, pCh->dataSetIn, resetBits ); + + // Make sure the channel exists, otherwise do nothing */ + if ( !i2Validate ( pCh ) ) + return -1; + + pB = pCh->pMyBord; + + status = pCh->dataSetIn; + + // Clear any specified error bits: but note that only actual error bits can + // be cleared, regardless of the value passed. + if (resetBits) + { + pCh->dataSetIn &= ~(resetBits & (I2_BRK | I2_PAR | I2_FRA | I2_OVR)); + pCh->dataSetIn &= ~(I2_DDCD | I2_DCTS | I2_DDSR | I2_DRI); + } + + ip2trace (CHANN, ITRC_STATUS, ITRC_RETURN, 1, pCh->dataSetIn ); + + return status; +} + +//****************************************************************************** +// Function: i2Input(pChpDest,count) +// Parameters: Pointer to a channel structure +// Pointer to data buffer +// Number of bytes to read +// Returns: Number of bytes read, or -1 for error +// +// Description: +// Strips data from the input buffer and writes it to pDest. If there is a +// collosal blunder, (invalid structure pointers or the like), returns -1. +// Otherwise, returns the number of bytes read. +//****************************************************************************** +static int +i2Input(i2ChanStrPtr pCh) +{ + int amountToMove; + unsigned short stripIndex; + int count; + unsigned long flags = 0; + + ip2trace (CHANN, ITRC_INPUT, ITRC_ENTER, 0); + + // Ensure channel structure seems real + if ( !i2Validate( pCh ) ) { + count = -1; + goto i2Input_exit; + } + write_lock_irqsave(&pCh->Ibuf_spinlock, flags); + + // initialize some accelerators and private copies + stripIndex = pCh->Ibuf_strip; + + count = pCh->Ibuf_stuff - stripIndex; + + // If buffer is empty or requested data count was 0, (trivial case) return + // without any further thought. + if ( count == 0 ) { + write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); + goto i2Input_exit; + } + // Adjust for buffer wrap + if ( count < 0 ) { + count += IBUF_SIZE; + } + // Don't give more than can be taken by the line discipline + amountToMove = pCh->pTTY->receive_room; + if (count > amountToMove) { + count = amountToMove; + } + // How much could we copy without a wrap? + amountToMove = IBUF_SIZE - stripIndex; + + if (amountToMove > count) { + amountToMove = count; + } + // Move the first block + pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, + &(pCh->Ibuf[stripIndex]), NULL, amountToMove ); + // If we needed to wrap, do the second data move + if (count > amountToMove) { + pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, + pCh->Ibuf, NULL, count - amountToMove ); + } + // Bump and wrap the stripIndex all at once by the amount of data read. This + // method is good regardless of whether the data was in one or two pieces. + stripIndex += count; + if (stripIndex >= IBUF_SIZE) { + stripIndex -= IBUF_SIZE; + } + pCh->Ibuf_strip = stripIndex; + + // Update our flow control information and possibly queue ourselves to send + // it, depending on how much data has been stripped since the last time a + // packet was sent. + pCh->infl.asof += count; + + if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) { + pCh->sinceLastFlow -= pCh->whenSendFlow; + write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); + i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW); + } else { + write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); + } + +i2Input_exit: + + ip2trace (CHANN, ITRC_INPUT, ITRC_RETURN, 1, count); + + return count; +} + +//****************************************************************************** +// Function: i2InputFlush(pCh) +// Parameters: Pointer to a channel structure +// Returns: Number of bytes stripped, or -1 for error +// +// Description: +// Strips any data from the input buffer. If there is a collosal blunder, +// (invalid structure pointers or the like), returns -1. Otherwise, returns the +// number of bytes stripped. +//****************************************************************************** +static int +i2InputFlush(i2ChanStrPtr pCh) +{ + int count; + unsigned long flags; + + // Ensure channel structure seems real + if ( !i2Validate ( pCh ) ) + return -1; + + ip2trace (CHANN, ITRC_INPUT, 10, 0); + + write_lock_irqsave(&pCh->Ibuf_spinlock, flags); + count = pCh->Ibuf_stuff - pCh->Ibuf_strip; + + // Adjust for buffer wrap + if (count < 0) { + count += IBUF_SIZE; + } + + // Expedient way to zero out the buffer + pCh->Ibuf_strip = pCh->Ibuf_stuff; + + + // Update our flow control information and possibly queue ourselves to send + // it, depending on how much data has been stripped since the last time a + // packet was sent. + + pCh->infl.asof += count; + + if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow ) + { + pCh->sinceLastFlow -= pCh->whenSendFlow; + write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); + i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW); + } else { + write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); + } + + ip2trace (CHANN, ITRC_INPUT, 19, 1, count); + + return count; +} + +//****************************************************************************** +// Function: i2InputAvailable(pCh) +// Parameters: Pointer to a channel structure +// Returns: Number of bytes available, or -1 for error +// +// Description: +// If there is a collosal blunder, (invalid structure pointers or the like), +// returns -1. Otherwise, returns the number of bytes stripped. Otherwise, +// returns the number of bytes available in the buffer. +//****************************************************************************** +#if 0 +static int +i2InputAvailable(i2ChanStrPtr pCh) +{ + int count; + + // Ensure channel structure seems real + if ( !i2Validate ( pCh ) ) return -1; + + + // initialize some accelerators and private copies + read_lock_irqsave(&pCh->Ibuf_spinlock, flags); + count = pCh->Ibuf_stuff - pCh->Ibuf_strip; + read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); + + // Adjust for buffer wrap + if (count < 0) + { + count += IBUF_SIZE; + } + + return count; +} +#endif + +//****************************************************************************** +// Function: i2Output(pCh, pSource, count) +// Parameters: Pointer to channel structure +// Pointer to source data +// Number of bytes to send +// Returns: Number of bytes sent, or -1 for error +// +// Description: +// Queues the data at pSource to be sent as data packets to the board. If there +// is a collosal blunder, (invalid structure pointers or the like), returns -1. +// Otherwise, returns the number of bytes written. What if there is not enough +// room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then +// we transfer as many characters as we can now, then return. If this bit is +// clear (default), routine will spin along until all the data is buffered. +// Should this occur, the 1-ms delay routine is called while waiting to avoid +// applications that one cannot break out of. +//****************************************************************************** +static int +i2Output(i2ChanStrPtr pCh, const char *pSource, int count) +{ + i2eBordStrPtr pB; + unsigned char *pInsert; + int amountToMove; + int countOriginal = count; + unsigned short channel; + unsigned short stuffIndex; + unsigned long flags; + + int bailout = 10; + + ip2trace (CHANN, ITRC_OUTPUT, ITRC_ENTER, 2, count, 0 ); + + // Ensure channel structure seems real + if ( !i2Validate ( pCh ) ) + return -1; + + // initialize some accelerators and private copies + pB = pCh->pMyBord; + channel = pCh->infl.hd.i2sChannel; + + // If the board has gone fatal, return bad, and also hit the trap routine if + // it exists. + if (pB->i2eFatal) { + if (pB->i2eFatalTrap) { + (*(pB)->i2eFatalTrap)(pB); + } + return -1; + } + // Proceed as though we would do everything + while ( count > 0 ) { + + // How much room in output buffer is there? + read_lock_irqsave(&pCh->Obuf_spinlock, flags); + amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1; + read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); + if (amountToMove < 0) { + amountToMove += OBUF_SIZE; + } + // Subtract off the headers size and see how much room there is for real + // data. If this is negative, we will discover later. + amountToMove -= sizeof (i2DataHeader); + + // Don't move more (now) than can go in a single packet + if ( amountToMove > (int)(MAX_OBUF_BLOCK - sizeof(i2DataHeader)) ) { + amountToMove = MAX_OBUF_BLOCK - sizeof(i2DataHeader); + } + // Don't move more than the count we were given + if (amountToMove > count) { + amountToMove = count; + } + // Now we know how much we must move: NB because the ring buffers have + // an overflow area at the end, we needn't worry about wrapping in the + // middle of a packet. + +// Small WINDOW here with no LOCK but I can't call Flush with LOCK +// We would be flushing (or ending flush) anyway + + ip2trace (CHANN, ITRC_OUTPUT, 10, 1, amountToMove ); + + if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) ) + && amountToMove > 0 ) + { + write_lock_irqsave(&pCh->Obuf_spinlock, flags); + stuffIndex = pCh->Obuf_stuff; + + // Had room to move some data: don't know whether the block size, + // buffer space, or what was the limiting factor... + pInsert = &(pCh->Obuf[stuffIndex]); + + // Set up the header + CHANNEL_OF(pInsert) = channel; + PTYPE_OF(pInsert) = PTYPE_DATA; + TAG_OF(pInsert) = 0; + ID_OF(pInsert) = ID_ORDINARY_DATA; + DATA_COUNT_OF(pInsert) = amountToMove; + + // Move the data + memcpy( (char*)(DATA_OF(pInsert)), pSource, amountToMove ); + // Adjust pointers and indices + pSource += amountToMove; + pCh->Obuf_char_count += amountToMove; + stuffIndex += amountToMove + sizeof(i2DataHeader); + count -= amountToMove; + + if (stuffIndex >= OBUF_SIZE) { + stuffIndex = 0; + } + pCh->Obuf_stuff = stuffIndex; + + write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); + + ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex ); + + } else { + + // Cannot move data + // becuz we need to stuff a flush + // or amount to move is <= 0 + + ip2trace(CHANN, ITRC_OUTPUT, 14, 3, + amountToMove, pB->i2eFifoRemains, + pB->i2eWaitingForEmptyFifo ); + + // Put this channel back on queue + // this ultimatly gets more data or wakes write output + i2QueueNeeds(pB, pCh, NEED_INLINE); + + if ( pB->i2eWaitingForEmptyFifo ) { + + ip2trace (CHANN, ITRC_OUTPUT, 16, 0 ); + + // or schedule + if (!in_interrupt()) { + + ip2trace (CHANN, ITRC_OUTPUT, 61, 0 ); + + schedule_timeout_interruptible(2); + if (signal_pending(current)) { + break; + } + continue; + } else { + + ip2trace (CHANN, ITRC_OUTPUT, 62, 0 ); + + // let interrupt in = WAS restore_flags() + // We hold no lock nor is irq off anymore??? + + break; + } + break; // from while(count) + } + else if ( pB->i2eFifoRemains < 32 && !pB->i2eTxMailEmpty ( pB ) ) + { + ip2trace (CHANN, ITRC_OUTPUT, 19, 2, + pB->i2eFifoRemains, + pB->i2eTxMailEmpty ); + + break; // from while(count) + } else if ( pCh->channelNeeds & NEED_CREDIT ) { + + ip2trace (CHANN, ITRC_OUTPUT, 22, 0 ); + + break; // from while(count) + } else if ( --bailout) { + + // Try to throw more things (maybe not us) in the fifo if we're + // not already waiting for it. + + ip2trace (CHANN, ITRC_OUTPUT, 20, 0 ); + + serviceOutgoingFifo(pB); + //break; CONTINUE; + } else { + ip2trace (CHANN, ITRC_OUTPUT, 21, 3, + pB->i2eFifoRemains, + pB->i2eOutMailWaiting, + pB->i2eWaitingForEmptyFifo ); + + break; // from while(count) + } + } + } // End of while(count) + + i2QueueNeeds(pB, pCh, NEED_INLINE); + + // We drop through either when the count expires, or when there is some + // count left, but there was a non-blocking write. + if (countOriginal > count) { + + ip2trace (CHANN, ITRC_OUTPUT, 17, 2, countOriginal, count ); + + serviceOutgoingFifo( pB ); + } + + ip2trace (CHANN, ITRC_OUTPUT, ITRC_RETURN, 2, countOriginal, count ); + + return countOriginal - count; +} + +//****************************************************************************** +// Function: i2FlushOutput(pCh) +// Parameters: Pointer to a channel structure +// Returns: Nothing +// +// Description: +// Sends bypass command to start flushing (waiting possibly forever until there +// is room), then sends inline command to stop flushing output, (again waiting +// possibly forever). +//****************************************************************************** +static inline void +i2FlushOutput(i2ChanStrPtr pCh) +{ + + ip2trace (CHANN, ITRC_FLUSH, 1, 1, pCh->flush_flags ); + + if (pCh->flush_flags) + return; + + if ( 1 != i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) { + pCh->flush_flags = STARTFL_FLAG; // Failed - flag for later + + ip2trace (CHANN, ITRC_FLUSH, 2, 0 ); + + } else if ( 1 != i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL) ) { + pCh->flush_flags = STOPFL_FLAG; // Failed - flag for later + + ip2trace (CHANN, ITRC_FLUSH, 3, 0 ); + } +} + +static int +i2RetryFlushOutput(i2ChanStrPtr pCh) +{ + int old_flags = pCh->flush_flags; + + ip2trace (CHANN, ITRC_FLUSH, 14, 1, old_flags ); + + pCh->flush_flags = 0; // Clear flag so we can avoid recursion + // and queue the commands + + if ( old_flags & STARTFL_FLAG ) { + if ( 1 == i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) { + old_flags = STOPFL_FLAG; //Success - send stop flush + } else { + old_flags = STARTFL_FLAG; //Failure - Flag for retry later + } + + ip2trace (CHANN, ITRC_FLUSH, 15, 1, old_flags ); + + } + if ( old_flags & STOPFL_FLAG ) { + if (1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL)) { + old_flags = 0; // Success - clear flags + } + + ip2trace (CHANN, ITRC_FLUSH, 16, 1, old_flags ); + } + pCh->flush_flags = old_flags; + + ip2trace (CHANN, ITRC_FLUSH, 17, 1, old_flags ); + + return old_flags; +} + +//****************************************************************************** +// Function: i2DrainOutput(pCh,timeout) +// Parameters: Pointer to a channel structure +// Maximum period to wait +// Returns: ? +// +// Description: +// Uses the bookmark request command to ask the board to send a bookmark back as +// soon as all the data is completely sent. +//****************************************************************************** +static void +i2DrainWakeup(unsigned long d) +{ + i2ChanStrPtr pCh = (i2ChanStrPtr)d; + + ip2trace (CHANN, ITRC_DRAIN, 10, 1, pCh->BookmarkTimer.expires ); + + pCh->BookmarkTimer.expires = 0; + wake_up_interruptible( &pCh->pBookmarkWait ); +} + +static void +i2DrainOutput(i2ChanStrPtr pCh, int timeout) +{ + wait_queue_t wait; + i2eBordStrPtr pB; + + ip2trace (CHANN, ITRC_DRAIN, ITRC_ENTER, 1, pCh->BookmarkTimer.expires); + + pB = pCh->pMyBord; + // If the board has gone fatal, return bad, + // and also hit the trap routine if it exists. + if (pB->i2eFatal) { + if (pB->i2eFatalTrap) { + (*(pB)->i2eFatalTrap)(pB); + } + return; + } + if ((timeout > 0) && (pCh->BookmarkTimer.expires == 0 )) { + // One per customer (channel) + setup_timer(&pCh->BookmarkTimer, i2DrainWakeup, + (unsigned long)pCh); + + ip2trace (CHANN, ITRC_DRAIN, 1, 1, pCh->BookmarkTimer.expires ); + + mod_timer(&pCh->BookmarkTimer, jiffies + timeout); + } + + i2QueueCommands( PTYPE_INLINE, pCh, -1, 1, CMD_BMARK_REQ ); + + init_waitqueue_entry(&wait, current); + add_wait_queue(&(pCh->pBookmarkWait), &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + serviceOutgoingFifo( pB ); + + schedule(); // Now we take our interruptible sleep on + + // Clean up the queue + set_current_state( TASK_RUNNING ); + remove_wait_queue(&(pCh->pBookmarkWait), &wait); + + // if expires == 0 then timer poped, then do not need to del_timer + if ((timeout > 0) && pCh->BookmarkTimer.expires && + time_before(jiffies, pCh->BookmarkTimer.expires)) { + del_timer( &(pCh->BookmarkTimer) ); + pCh->BookmarkTimer.expires = 0; + + ip2trace (CHANN, ITRC_DRAIN, 3, 1, pCh->BookmarkTimer.expires ); + + } + ip2trace (CHANN, ITRC_DRAIN, ITRC_RETURN, 1, pCh->BookmarkTimer.expires ); + return; +} + +//****************************************************************************** +// Function: i2OutputFree(pCh) +// Parameters: Pointer to a channel structure +// Returns: Space in output buffer +// +// Description: +// Returns -1 if very gross error. Otherwise returns the amount of bytes still +// free in the output buffer. +//****************************************************************************** +static int +i2OutputFree(i2ChanStrPtr pCh) +{ + int amountToMove; + unsigned long flags; + + // Ensure channel structure seems real + if ( !i2Validate ( pCh ) ) { + return -1; + } + read_lock_irqsave(&pCh->Obuf_spinlock, flags); + amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1; + read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); + + if (amountToMove < 0) { + amountToMove += OBUF_SIZE; + } + // If this is negative, we will discover later + amountToMove -= sizeof(i2DataHeader); + + return (amountToMove < 0) ? 0 : amountToMove; +} +static void + +ip2_owake( PTTY tp) +{ + i2ChanStrPtr pCh; + + if (tp == NULL) return; + + pCh = tp->driver_data; + + ip2trace (CHANN, ITRC_SICMD, 10, 2, tp->flags, + (1 << TTY_DO_WRITE_WAKEUP) ); + + tty_wakeup(tp); +} + +static inline void +set_baud_params(i2eBordStrPtr pB) +{ + int i,j; + i2ChanStrPtr *pCh; + + pCh = (i2ChanStrPtr *) pB->i2eChannelPtr; + + for (i = 0; i < ABS_MAX_BOXES; i++) { + if (pB->channelBtypes.bid_value[i]) { + if (BID_HAS_654(pB->channelBtypes.bid_value[i])) { + for (j = 0; j < ABS_BIGGEST_BOX; j++) { + if (pCh[i*16+j] == NULL) + break; + (pCh[i*16+j])->BaudBase = 921600; // MAX for ST654 + (pCh[i*16+j])->BaudDivisor = 96; + } + } else { // has cirrus cd1400 + for (j = 0; j < ABS_BIGGEST_BOX; j++) { + if (pCh[i*16+j] == NULL) + break; + (pCh[i*16+j])->BaudBase = 115200; // MAX for CD1400 + (pCh[i*16+j])->BaudDivisor = 12; + } + } + } + } +} + +//****************************************************************************** +// Function: i2StripFifo(pB) +// Parameters: Pointer to a board structure +// Returns: ? +// +// Description: +// Strips all the available data from the incoming FIFO, identifies the type of +// packet, and either buffers the data or does what needs to be done. +// +// Note there is no overflow checking here: if the board sends more data than it +// ought to, we will not detect it here, but blindly overflow... +//****************************************************************************** + +// A buffer for reading in blocks for unknown channels +static unsigned char junkBuffer[IBUF_SIZE]; + +// A buffer to read in a status packet. Because of the size of the count field +// for these things, the maximum packet size must be less than MAX_CMD_PACK_SIZE +static unsigned char cmdBuffer[MAX_CMD_PACK_SIZE + 4]; + +// This table changes the bit order from MSR order given by STAT_MODEM packet to +// status bits used in our library. +static char xlatDss[16] = { +0 | 0 | 0 | 0 , +0 | 0 | 0 | I2_CTS , +0 | 0 | I2_DSR | 0 , +0 | 0 | I2_DSR | I2_CTS , +0 | I2_RI | 0 | 0 , +0 | I2_RI | 0 | I2_CTS , +0 | I2_RI | I2_DSR | 0 , +0 | I2_RI | I2_DSR | I2_CTS , +I2_DCD | 0 | 0 | 0 , +I2_DCD | 0 | 0 | I2_CTS , +I2_DCD | 0 | I2_DSR | 0 , +I2_DCD | 0 | I2_DSR | I2_CTS , +I2_DCD | I2_RI | 0 | 0 , +I2_DCD | I2_RI | 0 | I2_CTS , +I2_DCD | I2_RI | I2_DSR | 0 , +I2_DCD | I2_RI | I2_DSR | I2_CTS }; + +static inline void +i2StripFifo(i2eBordStrPtr pB) +{ + i2ChanStrPtr pCh; + int channel; + int count; + unsigned short stuffIndex; + int amountToRead; + unsigned char *pc, *pcLimit; + unsigned char uc; + unsigned char dss_change; + unsigned long bflags,cflags; + +// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 ); + + while (I2_HAS_INPUT(pB)) { +// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 ); + + // Process packet from fifo a one atomic unit + write_lock_irqsave(&pB->read_fifo_spinlock, bflags); + + // The first word (or two bytes) will have channel number and type of + // packet, possibly other information + pB->i2eLeadoffWord[0] = iiReadWord(pB); + + switch(PTYPE_OF(pB->i2eLeadoffWord)) + { + case PTYPE_DATA: + pB->got_input = 1; + +// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 3, 0 ); + + channel = CHANNEL_OF(pB->i2eLeadoffWord); /* Store channel */ + count = iiReadWord(pB); /* Count is in the next word */ + +// NEW: Check the count for sanity! Should the hardware fail, our death +// is more pleasant. While an oversize channel is acceptable (just more +// than the driver supports), an over-length count clearly means we are +// sick! + if ( ((unsigned int)count) > IBUF_SIZE ) { + pB->i2eFatal = 2; + write_unlock_irqrestore(&pB->read_fifo_spinlock, + bflags); + return; /* Bail out ASAP */ + } + // Channel is illegally big ? + if ((channel >= pB->i2eChannelCnt) || + (NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel]))) + { + iiReadBuf(pB, junkBuffer, count); + write_unlock_irqrestore(&pB->read_fifo_spinlock, + bflags); + break; /* From switch: ready for next packet */ + } + + // Channel should be valid, then + + // If this is a hot-key, merely post its receipt for now. These are + // always supposed to be 1-byte packets, so we won't even check the + // count. Also we will post an acknowledgement to the board so that + // more data can be forthcoming. Note that we are not trying to use + // these sequences in this driver, merely to robustly ignore them. + if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY) + { + pCh->hotKeyIn = iiReadWord(pB) & 0xff; + write_unlock_irqrestore(&pB->read_fifo_spinlock, + bflags); + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK); + break; /* From the switch: ready for next packet */ + } + + // Normal data! We crudely assume there is room for the data in our + // buffer because the board wouldn't have exceeded his credit limit. + write_lock_irqsave(&pCh->Ibuf_spinlock, cflags); + // We have 2 locks now + stuffIndex = pCh->Ibuf_stuff; + amountToRead = IBUF_SIZE - stuffIndex; + if (amountToRead > count) + amountToRead = count; + + // stuffIndex would have been already adjusted so there would + // always be room for at least one, and count is always at least + // one. + + iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead); + pCh->icount.rx += amountToRead; + + // Update the stuffIndex by the amount of data moved. Note we could + // never ask for more data than would just fit. However, we might + // have read in one more byte than we wanted because the read + // rounds up to even bytes. If this byte is on the end of the + // packet, and is padding, we ignore it. If the byte is part of + // the actual data, we need to move it. + + stuffIndex += amountToRead; + + if (stuffIndex >= IBUF_SIZE) { + if ((amountToRead & 1) && (count > amountToRead)) { + pCh->Ibuf[0] = pCh->Ibuf[IBUF_SIZE]; + amountToRead++; + stuffIndex = 1; + } else { + stuffIndex = 0; + } + } + + // If there is anything left over, read it as well + if (count > amountToRead) { + amountToRead = count - amountToRead; + iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead); + pCh->icount.rx += amountToRead; + stuffIndex += amountToRead; + } + + // Update stuff index + pCh->Ibuf_stuff = stuffIndex; + write_unlock_irqrestore(&pCh->Ibuf_spinlock, cflags); + write_unlock_irqrestore(&pB->read_fifo_spinlock, + bflags); + +#ifdef USE_IQ + schedule_work(&pCh->tqueue_input); +#else + do_input(&pCh->tqueue_input); +#endif + + // Note we do not need to maintain any flow-control credits at this + // time: if we were to increment .asof and decrement .room, there + // would be no net effect. Instead, when we strip data, we will + // increment .asof and leave .room unchanged. + + break; // From switch: ready for next packet + + case PTYPE_STATUS: + ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 4, 0 ); + + count = CMD_COUNT_OF(pB->i2eLeadoffWord); + + iiReadBuf(pB, cmdBuffer, count); + // We can release early with buffer grab + write_unlock_irqrestore(&pB->read_fifo_spinlock, + bflags); + + pc = cmdBuffer; + pcLimit = &(cmdBuffer[count]); + + while (pc < pcLimit) { + channel = *pc++; + + ip2trace (channel, ITRC_SFIFO, 7, 2, channel, *pc ); + + /* check for valid channel */ + if (channel < pB->i2eChannelCnt + && + (pCh = (((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])) != NULL + ) + { + dss_change = 0; + + switch (uc = *pc++) + { + /* Breaks and modem signals are easy: just update status */ + case STAT_CTS_UP: + if ( !(pCh->dataSetIn & I2_CTS) ) + { + pCh->dataSetIn |= I2_DCTS; + pCh->icount.cts++; + dss_change = 1; + } + pCh->dataSetIn |= I2_CTS; + break; + + case STAT_CTS_DN: + if ( pCh->dataSetIn & I2_CTS ) + { + pCh->dataSetIn |= I2_DCTS; + pCh->icount.cts++; + dss_change = 1; + } + pCh->dataSetIn &= ~I2_CTS; + break; + + case STAT_DCD_UP: + ip2trace (channel, ITRC_MODEM, 1, 1, pCh->dataSetIn ); + + if ( !(pCh->dataSetIn & I2_DCD) ) + { + ip2trace (CHANN, ITRC_MODEM, 2, 0 ); + pCh->dataSetIn |= I2_DDCD; + pCh->icount.dcd++; + dss_change = 1; + } + pCh->dataSetIn |= I2_DCD; + + ip2trace (channel, ITRC_MODEM, 3, 1, pCh->dataSetIn ); + break; + + case STAT_DCD_DN: + ip2trace (channel, ITRC_MODEM, 4, 1, pCh->dataSetIn ); + if ( pCh->dataSetIn & I2_DCD ) + { + ip2trace (channel, ITRC_MODEM, 5, 0 ); + pCh->dataSetIn |= I2_DDCD; + pCh->icount.dcd++; + dss_change = 1; + } + pCh->dataSetIn &= ~I2_DCD; + + ip2trace (channel, ITRC_MODEM, 6, 1, pCh->dataSetIn ); + break; + + case STAT_DSR_UP: + if ( !(pCh->dataSetIn & I2_DSR) ) + { + pCh->dataSetIn |= I2_DDSR; + pCh->icount.dsr++; + dss_change = 1; + } + pCh->dataSetIn |= I2_DSR; + break; + + case STAT_DSR_DN: + if ( pCh->dataSetIn & I2_DSR ) + { + pCh->dataSetIn |= I2_DDSR; + pCh->icount.dsr++; + dss_change = 1; + } + pCh->dataSetIn &= ~I2_DSR; + break; + + case STAT_RI_UP: + if ( !(pCh->dataSetIn & I2_RI) ) + { + pCh->dataSetIn |= I2_DRI; + pCh->icount.rng++; + dss_change = 1; + } + pCh->dataSetIn |= I2_RI ; + break; + + case STAT_RI_DN: + // to be compat with serial.c + //if ( pCh->dataSetIn & I2_RI ) + //{ + // pCh->dataSetIn |= I2_DRI; + // pCh->icount.rng++; + // dss_change = 1; + //} + pCh->dataSetIn &= ~I2_RI ; + break; + + case STAT_BRK_DET: + pCh->dataSetIn |= I2_BRK; + pCh->icount.brk++; + dss_change = 1; + break; + + // Bookmarks? one less request we're waiting for + case STAT_BMARK: + pCh->bookMarks--; + if (pCh->bookMarks <= 0 ) { + pCh->bookMarks = 0; + wake_up_interruptible( &pCh->pBookmarkWait ); + + ip2trace (channel, ITRC_DRAIN, 20, 1, pCh->BookmarkTimer.expires ); + } + break; + + // Flow control packets? Update the new credits, and if + // someone was waiting for output, queue him up again. + case STAT_FLOW: + pCh->outfl.room = + ((flowStatPtr)pc)->room - + (pCh->outfl.asof - ((flowStatPtr)pc)->asof); + + ip2trace (channel, ITRC_STFLW, 1, 1, pCh->outfl.room ); + + if (pCh->channelNeeds & NEED_CREDIT) + { + ip2trace (channel, ITRC_STFLW, 2, 1, pCh->channelNeeds); + + pCh->channelNeeds &= ~NEED_CREDIT; + i2QueueNeeds(pB, pCh, NEED_INLINE); + if ( pCh->pTTY ) + ip2_owake(pCh->pTTY); + } + + ip2trace (channel, ITRC_STFLW, 3, 1, pCh->channelNeeds); + + pc += sizeof(flowStat); + break; + + /* Special packets: */ + /* Just copy the information into the channel structure */ + + case STAT_STATUS: + + pCh->channelStatus = *((debugStatPtr)pc); + pc += sizeof(debugStat); + break; + + case STAT_TXCNT: + + pCh->channelTcount = *((cntStatPtr)pc); + pc += sizeof(cntStat); + break; + + case STAT_RXCNT: + + pCh->channelRcount = *((cntStatPtr)pc); + pc += sizeof(cntStat); + break; + + case STAT_BOXIDS: + pB->channelBtypes = *((bidStatPtr)pc); + pc += sizeof(bidStat); + set_baud_params(pB); + break; + + case STAT_HWFAIL: + i2QueueCommands (PTYPE_INLINE, pCh, 0, 1, CMD_HW_TEST); + pCh->channelFail = *((failStatPtr)pc); + pc += sizeof(failStat); + break; + + /* No explicit match? then + * Might be an error packet... + */ + default: + switch (uc & STAT_MOD_ERROR) + { + case STAT_ERROR: + if (uc & STAT_E_PARITY) { + pCh->dataSetIn |= I2_PAR; + pCh->icount.parity++; + } + if (uc & STAT_E_FRAMING){ + pCh->dataSetIn |= I2_FRA; + pCh->icount.frame++; + } + if (uc & STAT_E_OVERRUN){ + pCh->dataSetIn |= I2_OVR; + pCh->icount.overrun++; + } + break; + + case STAT_MODEM: + // the answer to DSS_NOW request (not change) + pCh->dataSetIn = (pCh->dataSetIn + & ~(I2_RI | I2_CTS | I2_DCD | I2_DSR) ) + | xlatDss[uc & 0xf]; + wake_up_interruptible ( &pCh->dss_now_wait ); + default: + break; + } + } /* End of switch on status type */ + if (dss_change) { +#ifdef USE_IQ + schedule_work(&pCh->tqueue_status); +#else + do_status(&pCh->tqueue_status); +#endif + } + } + else /* Or else, channel is invalid */ + { + // Even though the channel is invalid, we must test the + // status to see how much additional data it has (to be + // skipped) + switch (*pc++) + { + case STAT_FLOW: + pc += 4; /* Skip the data */ + break; + + default: + break; + } + } + } // End of while (there is still some status packet left) + break; + + default: // Neither packet? should be impossible + ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1, + PTYPE_OF(pB->i2eLeadoffWord) ); + write_unlock_irqrestore(&pB->read_fifo_spinlock, + bflags); + + break; + } // End of switch on type of packets + } /*while(board I2_HAS_INPUT)*/ + + ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 ); + + // Send acknowledgement to the board even if there was no data! + pB->i2eOutMailWaiting |= MB_IN_STRIPPED; + return; +} + +//****************************************************************************** +// Function: i2Write2Fifo(pB,address,count) +// Parameters: Pointer to a board structure, source address, byte count +// Returns: bytes written +// +// Description: +// Writes count bytes to board io address(implied) from source +// Adjusts count, leaves reserve for next time around bypass cmds +//****************************************************************************** +static int +i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve) +{ + int rc = 0; + unsigned long flags; + write_lock_irqsave(&pB->write_fifo_spinlock, flags); + if (!pB->i2eWaitingForEmptyFifo) { + if (pB->i2eFifoRemains > (count+reserve)) { + pB->i2eFifoRemains -= count; + iiWriteBuf(pB, source, count); + pB->i2eOutMailWaiting |= MB_OUT_STUFFED; + rc = count; + } + } + write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); + return rc; +} +//****************************************************************************** +// Function: i2StuffFifoBypass(pB) +// Parameters: Pointer to a board structure +// Returns: Nothing +// +// Description: +// Stuffs as many bypass commands into the fifo as possible. This is simpler +// than stuffing data or inline commands to fifo, since we do not have +// flow-control to deal with. +//****************************************************************************** +static inline void +i2StuffFifoBypass(i2eBordStrPtr pB) +{ + i2ChanStrPtr pCh; + unsigned char *pRemove; + unsigned short stripIndex; + unsigned short packetSize; + unsigned short paddedSize; + unsigned short notClogged = 1; + unsigned long flags; + + int bailout = 1000; + + // Continue processing so long as there are entries, or there is room in the + // fifo. Each entry represents a channel with something to do. + while ( --bailout && notClogged && + (NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS)))) + { + write_lock_irqsave(&pCh->Cbuf_spinlock, flags); + stripIndex = pCh->Cbuf_strip; + + // as long as there are packets for this channel... + + while (stripIndex != pCh->Cbuf_stuff) { + pRemove = &(pCh->Cbuf[stripIndex]); + packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader); + paddedSize = roundup(packetSize, 2); + + if (paddedSize > 0) { + if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) { + notClogged = 0; /* fifo full */ + i2QueueNeeds(pB, pCh, NEED_BYPASS); // Put back on queue + break; // Break from the channel + } + } +#ifdef DEBUG_FIFO +WriteDBGBuf("BYPS", pRemove, paddedSize); +#endif /* DEBUG_FIFO */ + pB->debugBypassCount++; + + pRemove += packetSize; + stripIndex += packetSize; + if (stripIndex >= CBUF_SIZE) { + stripIndex = 0; + pRemove = pCh->Cbuf; + } + } + // Done with this channel. Move to next, removing this one from + // the queue of channels if we cleaned it out (i.e., didn't get clogged. + pCh->Cbuf_strip = stripIndex; + write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags); + } // Either clogged or finished all the work + +#ifdef IP2DEBUG_TRACE + if ( !bailout ) { + ip2trace (ITRC_NO_PORT, ITRC_ERROR, 1, 0 ); + } +#endif +} + +//****************************************************************************** +// Function: i2StuffFifoFlow(pB) +// Parameters: Pointer to a board structure +// Returns: Nothing +// +// Description: +// Stuffs as many flow control packets into the fifo as possible. This is easier +// even than doing normal bypass commands, because there is always at most one +// packet, already assembled, for each channel. +//****************************************************************************** +static inline void +i2StuffFifoFlow(i2eBordStrPtr pB) +{ + i2ChanStrPtr pCh; + unsigned short paddedSize = roundup(sizeof(flowIn), 2); + + ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2, + pB->i2eFifoRemains, paddedSize ); + + // Continue processing so long as there are entries, or there is room in the + // fifo. Each entry represents a channel with something to do. + while ( (NULL != (pCh = i2DeQueueNeeds(pB,NEED_FLOW)))) { + pB->debugFlowCount++; + + // NO Chan LOCK needed ??? + if ( 0 == i2Write2Fifo(pB,(unsigned char *)&(pCh->infl),paddedSize,0)) { + break; + } +#ifdef DEBUG_FIFO + WriteDBGBuf("FLOW",(unsigned char *) &(pCh->infl), paddedSize); +#endif /* DEBUG_FIFO */ + + } // Either clogged or finished all the work + + ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_RETURN, 0 ); +} + +//****************************************************************************** +// Function: i2StuffFifoInline(pB) +// Parameters: Pointer to a board structure +// Returns: Nothing +// +// Description: +// Stuffs as much data and inline commands into the fifo as possible. This is +// the most complex fifo-stuffing operation, since there if now the channel +// flow-control issue to deal with. +//****************************************************************************** +static inline void +i2StuffFifoInline(i2eBordStrPtr pB) +{ + i2ChanStrPtr pCh; + unsigned char *pRemove; + unsigned short stripIndex; + unsigned short packetSize; + unsigned short paddedSize; + unsigned short notClogged = 1; + unsigned short flowsize; + unsigned long flags; + + int bailout = 1000; + int bailout2; + + ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_ENTER, 3, pB->i2eFifoRemains, + pB->i2Dbuf_strip, pB->i2Dbuf_stuff ); + + // Continue processing so long as there are entries, or there is room in the + // fifo. Each entry represents a channel with something to do. + while ( --bailout && notClogged && + (NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) ) + { + write_lock_irqsave(&pCh->Obuf_spinlock, flags); + stripIndex = pCh->Obuf_strip; + + ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff ); + + // as long as there are packets for this channel... + bailout2 = 1000; + while ( --bailout2 && stripIndex != pCh->Obuf_stuff) { + pRemove = &(pCh->Obuf[stripIndex]); + + // Must determine whether this be a data or command packet to + // calculate correctly the header size and the amount of + // flow-control credit this type of packet will use. + if (PTYPE_OF(pRemove) == PTYPE_DATA) { + flowsize = DATA_COUNT_OF(pRemove); + packetSize = flowsize + sizeof(i2DataHeader); + } else { + flowsize = CMD_COUNT_OF(pRemove); + packetSize = flowsize + sizeof(i2CmdHeader); + } + flowsize = CREDIT_USAGE(flowsize); + paddedSize = roundup(packetSize, 2); + + ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize ); + + // If we don't have enough credits from the board to send the data, + // flag the channel that we are waiting for flow control credit, and + // break out. This will clean up this channel and remove us from the + // queue of hot things to do. + + ip2trace (CHANN, ITRC_SICMD, 5, 2, pCh->outfl.room, flowsize ); + + if (pCh->outfl.room <= flowsize) { + // Do Not have the credits to send this packet. + i2QueueNeeds(pB, pCh, NEED_CREDIT); + notClogged = 0; + break; // So to do next channel + } + if ( (paddedSize > 0) + && ( 0 == i2Write2Fifo(pB, pRemove, paddedSize, 128))) { + // Do Not have room in fifo to send this packet. + notClogged = 0; + i2QueueNeeds(pB, pCh, NEED_INLINE); + break; // Break from the channel + } +#ifdef DEBUG_FIFO +WriteDBGBuf("DATA", pRemove, paddedSize); +#endif /* DEBUG_FIFO */ + pB->debugInlineCount++; + + pCh->icount.tx += flowsize; + // Update current credits + pCh->outfl.room -= flowsize; + pCh->outfl.asof += flowsize; + if (PTYPE_OF(pRemove) == PTYPE_DATA) { + pCh->Obuf_char_count -= DATA_COUNT_OF(pRemove); + } + pRemove += packetSize; + stripIndex += packetSize; + + ip2trace (CHANN, ITRC_SICMD, 6, 2, stripIndex, pCh->Obuf_strip); + + if (stripIndex >= OBUF_SIZE) { + stripIndex = 0; + pRemove = pCh->Obuf; + + ip2trace (CHANN, ITRC_SICMD, 7, 1, stripIndex ); + + } + } /* while */ + if ( !bailout2 ) { + ip2trace (CHANN, ITRC_ERROR, 3, 0 ); + } + // Done with this channel. Move to next, removing this one from the + // queue of channels if we cleaned it out (i.e., didn't get clogged. + pCh->Obuf_strip = stripIndex; + write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); + if ( notClogged ) + { + + ip2trace (CHANN, ITRC_SICMD, 8, 0 ); + + if ( pCh->pTTY ) { + ip2_owake(pCh->pTTY); + } + } + } // Either clogged or finished all the work + + if ( !bailout ) { + ip2trace (ITRC_NO_PORT, ITRC_ERROR, 4, 0 ); + } + + ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_RETURN, 1,pB->i2Dbuf_strip); +} + +//****************************************************************************** +// Function: serviceOutgoingFifo(pB) +// Parameters: Pointer to a board structure +// Returns: Nothing +// +// Description: +// Helper routine to put data in the outgoing fifo, if we aren't already waiting +// for something to be there. If the fifo has only room for a very little data, +// go head and hit the board with a mailbox hit immediately. Otherwise, it will +// have to happen later in the interrupt processing. Since this routine may be +// called both at interrupt and foreground time, we must turn off interrupts +// during the entire process. +//****************************************************************************** +static void +serviceOutgoingFifo(i2eBordStrPtr pB) +{ + // If we aren't currently waiting for the board to empty our fifo, service + // everything that is pending, in priority order (especially, Bypass before + // Inline). + if ( ! pB->i2eWaitingForEmptyFifo ) + { + i2StuffFifoFlow(pB); + i2StuffFifoBypass(pB); + i2StuffFifoInline(pB); + + iiSendPendingMail(pB); + } +} + +//****************************************************************************** +// Function: i2ServiceBoard(pB) +// Parameters: Pointer to a board structure +// Returns: Nothing +// +// Description: +// Normally this is called from interrupt level, but there is deliberately +// nothing in here specific to being called from interrupt level. All the +// hardware-specific, interrupt-specific things happen at the outer levels. +// +// For example, a timer interrupt could drive this routine for some sort of +// polled operation. The only requirement is that the programmer deal with any +// atomiticity/concurrency issues that result. +// +// This routine responds to the board's having sent mailbox information to the +// host (which would normally cause an interrupt). This routine reads the +// incoming mailbox. If there is no data in it, this board did not create the +// interrupt and/or has nothing to be done to it. (Except, if we have been +// waiting to write mailbox data to it, we may do so. +// +// Based on the value in the mailbox, we may take various actions. +// +// No checking here of pB validity: after all, it shouldn't have been called by +// the handler unless pB were on the list. +//****************************************************************************** +static inline int +i2ServiceBoard ( i2eBordStrPtr pB ) +{ + unsigned inmail; + unsigned long flags; + + + /* This should be atomic because of the way we are called... */ + if (NO_MAIL_HERE == ( inmail = pB->i2eStartMail ) ) { + inmail = iiGetMail(pB); + } + pB->i2eStartMail = NO_MAIL_HERE; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, 2, 1, inmail ); + + if (inmail != NO_MAIL_HERE) { + // If the board has gone fatal, nothing to do but hit a bit that will + // alert foreground tasks to protest! + if ( inmail & MB_FATAL_ERROR ) { + pB->i2eFatal = 1; + goto exit_i2ServiceBoard; + } + + /* Assuming no fatal condition, we proceed to do work */ + if ( inmail & MB_IN_STUFFED ) { + pB->i2eFifoInInts++; + i2StripFifo(pB); /* There might be incoming packets */ + } + + if (inmail & MB_OUT_STRIPPED) { + pB->i2eFifoOutInts++; + write_lock_irqsave(&pB->write_fifo_spinlock, flags); + pB->i2eFifoRemains = pB->i2eFifoSize; + pB->i2eWaitingForEmptyFifo = 0; + write_unlock_irqrestore(&pB->write_fifo_spinlock, + flags); + + ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains ); + + } + serviceOutgoingFifo(pB); + } + + ip2trace (ITRC_NO_PORT, ITRC_INTR, 8, 0 ); + +exit_i2ServiceBoard: + + return 0; +} diff --git a/drivers/staging/tty/ip2/i2lib.h b/drivers/staging/tty/ip2/i2lib.h new file mode 100644 index 000000000000..e559e9bac06d --- /dev/null +++ b/drivers/staging/tty/ip2/i2lib.h @@ -0,0 +1,351 @@ +/******************************************************************************* +* +* (c) 1998 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Header file for high level library functions +* +*******************************************************************************/ +#ifndef I2LIB_H +#define I2LIB_H 1 +//------------------------------------------------------------------------------ +// I2LIB.H +// +// IntelliPort-II and IntelliPort-IIEX +// +// Defines, structure definitions, and external declarations for i2lib.c +//------------------------------------------------------------------------------ +//-------------------------------------- +// Mandatory Includes: +//-------------------------------------- +#include "ip2types.h" +#include "i2ellis.h" +#include "i2pack.h" +#include "i2cmd.h" +#include + +//------------------------------------------------------------------------------ +// i2ChanStr -- Channel Structure: +// Used to track per-channel information for the library routines using standard +// loadware. Note also, a pointer to an array of these structures is patched +// into the i2eBordStr (see i2ellis.h) +//------------------------------------------------------------------------------ +// +// If we make some limits on the maximum block sizes, we can avoid dealing with +// buffer wrap. The wrapping of the buffer is based on where the start of the +// packet is. Then there is always room for the packet contiguously. +// +// Maximum total length of an outgoing data or in-line command block. The limit +// of 36 on data is quite arbitrary and based more on DOS memory limitations +// than the board interface. However, for commands, the maximum packet length is +// MAX_CMD_PACK_SIZE, because the field size for the count is only a few bits +// (see I2PACK.H) in such packets. For data packets, the count field size is not +// the limiting factor. As of this writing, MAX_OBUF_BLOCK < MAX_CMD_PACK_SIZE, +// but be careful if wanting to modify either. +// +#define MAX_OBUF_BLOCK 36 + +// Another note on maximum block sizes: we are buffering packets here. Data is +// put into the buffer (if there is room) regardless of the credits from the +// board. The board sends new credits whenever it has removed from his buffers a +// number of characters equal to 80% of total buffer size. (Of course, the total +// buffer size is what is reported when the very first set of flow control +// status packets are received from the board. Therefore, to be robust, you must +// always fill the board to at least 80% of the current credit limit, else you +// might not give it enough to trigger a new report. These conditions are +// obtained here so long as the maximum output block size is less than 20% the +// size of the board's output buffers. This is true at present by "coincidence" +// or "infernal knowledge": the board's output buffers are at least 700 bytes +// long (20% = 140 bytes, at least). The 80% figure is "official", so the safest +// strategy might be to trap the first flow control report and guarantee that +// the effective maxObufBlock is the minimum of MAX_OBUF_BLOCK and 20% of first +// reported buffer credit. +// +#define MAX_CBUF_BLOCK 6 // Maximum total length of a bypass command block + +#define IBUF_SIZE 512 // character capacity of input buffer per channel +#define OBUF_SIZE 1024// character capacity of output buffer per channel +#define CBUF_SIZE 10 // character capacity of output bypass buffer + +typedef struct _i2ChanStr +{ + // First, back-pointers so that given a pointer to this structure, you can + // determine the correct board and channel number to reference, (say, when + // issuing commands, etc. (Note, channel number is in infl.hd.i2sChannel.) + + int port_index; // Index of port in channel structure array attached + // to board structure. + PTTY pTTY; // Pointer to tty structure for port (OS specific) + USHORT validity; // Indicates whether the given channel has been + // initialized, really exists (or is a missing + // channel, e.g. channel 9 on an 8-port box.) + + i2eBordStrPtr pMyBord; // Back-pointer to this channel's board structure + + int wopen; // waiting fer carrier + + int throttled; // Set if upper layer can take no data + + int flags; // Defined in tty.h + + PWAITQ open_wait; // Pointer for OS sleep function. + PWAITQ close_wait; // Pointer for OS sleep function. + PWAITQ delta_msr_wait;// Pointer for OS sleep function. + PWAITQ dss_now_wait; // Pointer for OS sleep function. + + struct timer_list BookmarkTimer; // Used by i2DrainOutput + wait_queue_head_t pBookmarkWait; // Used by i2DrainOutput + + int BaudBase; + int BaudDivisor; + + USHORT ClosingDelay; + USHORT ClosingWaitTime; + + volatile + flowIn infl; // This structure is initialized as a completely + // formed flow-control command packet, and as such + // has the channel number, also the capacity and + // "as-of" data needed continuously. + + USHORT sinceLastFlow; // Counts the number of characters read from input + // buffers, since the last time flow control info + // was sent. + + USHORT whenSendFlow; // Determines when new flow control is to be sent to + // the board. Note unlike earlier manifestations of + // the driver, these packets can be sent from + // in-place. + + USHORT channelNeeds; // Bit map of important things which must be done + // for this channel. (See bits below ) + + volatile + flowStat outfl; // Same type of structure is used to hold current + // flow control information used to control our + // output. "asof" is kept updated as data is sent, + // and "room" never goes to zero. + + // The incoming ring buffer + // Unlike the outgoing buffers, this holds raw data, not packets. The two + // extra bytes are used to hold the byte-padding when there is room for an + // odd number of bytes before we must wrap. + // + UCHAR Ibuf[IBUF_SIZE + 2]; + volatile + USHORT Ibuf_stuff; // Stuffing index + volatile + USHORT Ibuf_strip; // Stripping index + + // The outgoing ring-buffer: Holds Data and command packets. N.B., even + // though these are in the channel structure, the channel is also written + // here, the easier to send it to the fifo when ready. HOWEVER, individual + // packets here are NOT padded to even length: the routines for writing + // blocks to the fifo will pad to even byte counts. + // + UCHAR Obuf[OBUF_SIZE+MAX_OBUF_BLOCK+4]; + volatile + USHORT Obuf_stuff; // Stuffing index + volatile + USHORT Obuf_strip; // Stripping index + int Obuf_char_count; + + // The outgoing bypass-command buffer. Unlike earlier manifestations, the + // flow control packets are sent directly from the structures. As above, the + // channel number is included in the packet, but they are NOT padded to even + // size. + // + UCHAR Cbuf[CBUF_SIZE+MAX_CBUF_BLOCK+2]; + volatile + USHORT Cbuf_stuff; // Stuffing index + volatile + USHORT Cbuf_strip; // Stripping index + + // The temporary buffer for the Linux tty driver PutChar entry. + // + UCHAR Pbuf[MAX_OBUF_BLOCK - sizeof (i2DataHeader)]; + volatile + USHORT Pbuf_stuff; // Stuffing index + + // The state of incoming data-set signals + // + USHORT dataSetIn; // Bit-mapped according to below. Also indicates + // whether a break has been detected since last + // inquiry. + + // The state of outcoming data-set signals (as far as we can tell!) + // + USHORT dataSetOut; // Bit-mapped according to below. + + // Most recent hot-key identifier detected + // + USHORT hotKeyIn; // Hot key as sent by the board, HOT_CLEAR indicates + // no hot key detected since last examined. + + // Counter of outstanding requests for bookmarks + // + short bookMarks; // Number of outstanding bookmark requests, (+ive + // whenever a bookmark request if queued up, -ive + // whenever a bookmark is received). + + // Misc options + // + USHORT channelOptions; // See below + + // To store various incoming special packets + // + debugStat channelStatus; + cntStat channelRcount; + cntStat channelTcount; + failStat channelFail; + + // To store the last values for line characteristics we sent to the board. + // + int speed; + + int flush_flags; + + void (*trace)(unsigned short,unsigned char,unsigned char,unsigned long,...); + + /* + * Kernel counters for the 4 input interrupts + */ + struct async_icount icount; + + /* + * Task queues for processing input packets from the board. + */ + struct work_struct tqueue_input; + struct work_struct tqueue_status; + struct work_struct tqueue_hangup; + + rwlock_t Ibuf_spinlock; + rwlock_t Obuf_spinlock; + rwlock_t Cbuf_spinlock; + rwlock_t Pbuf_spinlock; + +} i2ChanStr, *i2ChanStrPtr; + +//--------------------------------------------------- +// Manifests and bit-maps for elements in i2ChanStr +//--------------------------------------------------- +// +// flush flags +// +#define STARTFL_FLAG 1 +#define STOPFL_FLAG 2 + +// validity +// +#define CHANNEL_MAGIC_BITS 0xff00 +#define CHANNEL_MAGIC 0x5300 // (validity & CHANNEL_MAGIC_BITS) == + // CHANNEL_MAGIC --> structure good + +#define CHANNEL_SUPPORT 0x0001 // Indicates channel is supported, exists, + // and passed P.O.S.T. + +// channelNeeds +// +#define NEED_FLOW 1 // Indicates flow control has been queued +#define NEED_INLINE 2 // Indicates inline commands or data queued +#define NEED_BYPASS 4 // Indicates bypass commands queued +#define NEED_CREDIT 8 // Indicates would be sending except has not sufficient + // credit. The data is still in the channel structure, + // but the channel is not enqueued in the board + // structure again until there is a credit received from + // the board. + +// dataSetIn (Also the bits for i2GetStatus return value) +// +#define I2_DCD 1 +#define I2_CTS 2 +#define I2_DSR 4 +#define I2_RI 8 + +// dataSetOut (Also the bits for i2GetStatus return value) +// +#define I2_DTR 1 +#define I2_RTS 2 + +// i2GetStatus() can optionally clear these bits +// +#define I2_BRK 0x10 // A break was detected +#define I2_PAR 0x20 // A parity error was received +#define I2_FRA 0x40 // A framing error was received +#define I2_OVR 0x80 // An overrun error was received + +// i2GetStatus() automatically clears these bits */ +// +#define I2_DDCD 0x100 // DCD changed from its former value +#define I2_DCTS 0x200 // CTS changed from its former value +#define I2_DDSR 0x400 // DSR changed from its former value +#define I2_DRI 0x800 // RI changed from its former value + +// hotKeyIn +// +#define HOT_CLEAR 0x1322 // Indicates that no hot-key has been detected + +// channelOptions +// +#define CO_NBLOCK_WRITE 1 // Writes don't block waiting for buffer. (Default + // is, they do wait.) + +// fcmodes +// +#define I2_OUTFLOW_CTS 0x0001 +#define I2_INFLOW_RTS 0x0002 +#define I2_INFLOW_DSR 0x0004 +#define I2_INFLOW_DTR 0x0008 +#define I2_OUTFLOW_DSR 0x0010 +#define I2_OUTFLOW_DTR 0x0020 +#define I2_OUTFLOW_XON 0x0040 +#define I2_OUTFLOW_XANY 0x0080 +#define I2_INFLOW_XON 0x0100 + +#define I2_CRTSCTS (I2_OUTFLOW_CTS|I2_INFLOW_RTS) +#define I2_IXANY_MODE (I2_OUTFLOW_XON|I2_OUTFLOW_XANY) + +//------------------------------------------- +// Macros used from user level like functions +//------------------------------------------- + +// Macros to set and clear channel options +// +#define i2SetOption(pCh, option) pCh->channelOptions |= option +#define i2ClrOption(pCh, option) pCh->channelOptions &= ~option + +// Macro to set fatal-error trap +// +#define i2SetFatalTrap(pB, routine) pB->i2eFatalTrap = routine + +//-------------------------------------------- +// Declarations and prototypes for i2lib.c +//-------------------------------------------- +// +static int i2InitChannels(i2eBordStrPtr, int, i2ChanStrPtr); +static int i2QueueCommands(int, i2ChanStrPtr, int, int, cmdSyntaxPtr,...); +static int i2GetStatus(i2ChanStrPtr, int); +static int i2Input(i2ChanStrPtr); +static int i2InputFlush(i2ChanStrPtr); +static int i2Output(i2ChanStrPtr, const char *, int); +static int i2OutputFree(i2ChanStrPtr); +static int i2ServiceBoard(i2eBordStrPtr); +static void i2DrainOutput(i2ChanStrPtr, int); + +#ifdef IP2DEBUG_TRACE +void ip2trace(unsigned short,unsigned char,unsigned char,unsigned long,...); +#else +#define ip2trace(a,b,c,d...) do {} while (0) +#endif + +// Argument to i2QueueCommands +// +#define C_IN_LINE 1 +#define C_BYPASS 0 + +#endif // I2LIB_H diff --git a/drivers/staging/tty/ip2/i2pack.h b/drivers/staging/tty/ip2/i2pack.h new file mode 100644 index 000000000000..00342a677c90 --- /dev/null +++ b/drivers/staging/tty/ip2/i2pack.h @@ -0,0 +1,364 @@ +/******************************************************************************* +* +* (c) 1998 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Definitions of the packets used to transfer data and commands +* Host <--> Board. Information provided here is only applicable +* when the standard loadware is active. +* +*******************************************************************************/ +#ifndef I2PACK_H +#define I2PACK_H 1 + +//----------------------------------------------- +// Revision History: +// +// 10 October 1991 MAG First draft +// 24 February 1992 MAG Additions for 1.4.x loadware +// 11 March 1992 MAG New status packets +// +//----------------------------------------------- + +//------------------------------------------------------------------------------ +// Packet Formats: +// +// Information passes between the host and board through the FIFO in packets. +// These have headers which indicate the type of packet. Because the fifo data +// path may be 16-bits wide, the protocol is constrained such that each packet +// is always padded to an even byte count. (The lower-level interface routines +// -- i2ellis.c -- are designed to do this). +// +// The sender (be it host or board) must place some number of complete packets +// in the fifo, then place a message in the mailbox that packets are available. +// Placing such a message interrupts the "receiver" (be it board or host), who +// reads the mailbox message and determines that there are incoming packets +// ready. Since there are no partial packets, and the length of a packet is +// given in the header, the remainder of the packet can be read without checking +// for FIFO empty condition. The process is repeated, packet by packet, until +// the incoming FIFO is empty. Then the receiver uses the outbound mailbox to +// signal the board that it has read the data. Only then can the sender place +// additional data in the fifo. +//------------------------------------------------------------------------------ +// +//------------------------------------------------ +// Definition of Packet Header Area +//------------------------------------------------ +// +// Caution: these only define header areas. In actual use the data runs off +// beyond the end of these structures. +// +// Since these structures are based on sequences of bytes which go to the board, +// there cannot be ANY padding between the elements. +#pragma pack(1) + +//---------------------------- +// DATA PACKETS +//---------------------------- + +typedef struct _i2DataHeader +{ + unsigned char i2sChannel; /* The channel number: 0-255 */ + + // -- Bitfields are allocated LSB first -- + + // For incoming data, indicates whether this is an ordinary packet or a + // special one (e.g., hot key hit). + unsigned i2sId : 2 __attribute__ ((__packed__)); + + // For tagging data packets. There are flush commands which flush only data + // packets bearing a particular tag. (used in implementing IntelliView and + // IntelliPrint). THE TAG VALUE 0xf is RESERVED and must not be used (it has + // meaning internally to the loadware). + unsigned i2sTag : 4; + + // These two bits determine the type of packet sent/received. + unsigned i2sType : 2; + + // The count of data to follow: does not include the possible additional + // padding byte. MAXIMUM COUNT: 4094. The top four bits must be 0. + unsigned short i2sCount; + +} i2DataHeader, *i2DataHeaderPtr; + +// Structure is immediately followed by the data, proper. + +//---------------------------- +// NON-DATA PACKETS +//---------------------------- + +typedef struct _i2CmdHeader +{ + unsigned char i2sChannel; // The channel number: 0-255 (Except where noted + // - see below + + // Number of bytes of commands, status or whatever to follow + unsigned i2sCount : 6; + + // These two bits determine the type of packet sent/received. + unsigned i2sType : 2; + +} i2CmdHeader, *i2CmdHeaderPtr; + +// Structure is immediately followed by the applicable data. + +//--------------------------------------- +// Flow Control Packets (Outbound) +//--------------------------------------- + +// One type of outbound command packet is so important that the entire structure +// is explicitly defined here. That is the flow-control packet. This is never +// sent by user-level code (as would be the commands to raise/lower DTR, for +// example). These are only sent by the library routines in response to reading +// incoming data into the buffers. +// +// The parameters inside the command block are maintained in place, then the +// block is sent at the appropriate time. + +typedef struct _flowIn +{ + i2CmdHeader hd; // Channel #, count, type (see above) + unsigned char fcmd; // The flow control command (37) + unsigned short asof; // As of byte number "asof" (LSB first!) I have room + // for "room" bytes + unsigned short room; +} flowIn, *flowInPtr; + +//---------------------------------------- +// (Incoming) Status Packets +//---------------------------------------- + +// Incoming packets which are non-data packets are status packets. In this case, +// the channel number in the header is unimportant. What follows are one or more +// sub-packets, the first word of which consists of the channel (first or low +// byte) and the status indicator (second or high byte), followed by possibly +// more data. + +#define STAT_CTS_UP 0 /* CTS raised (no other bytes) */ +#define STAT_CTS_DN 1 /* CTS dropped (no other bytes) */ +#define STAT_DCD_UP 2 /* DCD raised (no other bytes) */ +#define STAT_DCD_DN 3 /* DCD dropped (no other bytes) */ +#define STAT_DSR_UP 4 /* DSR raised (no other bytes) */ +#define STAT_DSR_DN 5 /* DSR dropped (no other bytes) */ +#define STAT_RI_UP 6 /* RI raised (no other bytes) */ +#define STAT_RI_DN 7 /* RI dropped (no other bytes) */ +#define STAT_BRK_DET 8 /* BRK detect (no other bytes) */ +#define STAT_FLOW 9 /* Flow control(-- more: see below */ +#define STAT_BMARK 10 /* Bookmark (no other bytes) + * Bookmark is sent as a response to + * a command 60: request for bookmark + */ +#define STAT_STATUS 11 /* Special packet: see below */ +#define STAT_TXCNT 12 /* Special packet: see below */ +#define STAT_RXCNT 13 /* Special packet: see below */ +#define STAT_BOXIDS 14 /* Special packet: see below */ +#define STAT_HWFAIL 15 /* Special packet: see below */ + +#define STAT_MOD_ERROR 0xc0 +#define STAT_MODEM 0xc0/* If status & STAT_MOD_ERROR: + * == STAT_MODEM, then this is a modem + * status packet, given in response to a + * CMD_DSS_NOW command. + * The low nibble has each data signal: + */ +#define STAT_MOD_DCD 0x8 +#define STAT_MOD_RI 0x4 +#define STAT_MOD_DSR 0x2 +#define STAT_MOD_CTS 0x1 + +#define STAT_ERROR 0x80/* If status & STAT_MOD_ERROR + * == STAT_ERROR, then + * sort of error on the channel. + * The remaining seven bits indicate + * what sort of error it is. + */ +/* The low three bits indicate parity, framing, or overrun errors */ + +#define STAT_E_PARITY 4 /* Parity error */ +#define STAT_E_FRAMING 2 /* Framing error */ +#define STAT_E_OVERRUN 1 /* (uxart) overrun error */ + +//--------------------------------------- +// STAT_FLOW packets +//--------------------------------------- + +typedef struct _flowStat +{ + unsigned short asof; + unsigned short room; +}flowStat, *flowStatPtr; + +// flowStat packets are received from the board to regulate the flow of outgoing +// data. A local copy of this structure is also kept to track the amount of +// credits used and credits remaining. "room" is the amount of space in the +// board's buffers, "as of" having received a certain byte number. When sending +// data to the fifo, you must calculate how much buffer space your packet will +// use. Add this to the current "asof" and subtract it from the current "room". +// +// The calculation for the board's buffer is given by CREDIT_USAGE, where size +// is the un-rounded count of either data characters or command characters. +// (Which is to say, the count rounded up, plus two). + +#define CREDIT_USAGE(size) (((size) + 3) & ~1) + +//--------------------------------------- +// STAT_STATUS packets +//--------------------------------------- + +typedef struct _debugStat +{ + unsigned char d_ccsr; + unsigned char d_txinh; + unsigned char d_stat1; + unsigned char d_stat2; +} debugStat, *debugStatPtr; + +// debugStat packets are sent to the host in response to a CMD_GET_STATUS +// command. Each byte is bit-mapped as described below: + +#define D_CCSR_XON 2 /* Has received XON, ready to transmit */ +#define D_CCSR_XOFF 4 /* Has received XOFF, not transmitting */ +#define D_CCSR_TXENAB 8 /* Transmitter is enabled */ +#define D_CCSR_RXENAB 0x80 /* Receiver is enabled */ + +#define D_TXINH_BREAK 1 /* We are sending a break */ +#define D_TXINH_EMPTY 2 /* No data to send */ +#define D_TXINH_SUSP 4 /* Output suspended via command 57 */ +#define D_TXINH_CMD 8 /* We are processing an in-line command */ +#define D_TXINH_LCD 0x10 /* LCD diagnostics are running */ +#define D_TXINH_PAUSE 0x20 /* We are processing a PAUSE command */ +#define D_TXINH_DCD 0x40 /* DCD is low, preventing transmission */ +#define D_TXINH_DSR 0x80 /* DSR is low, preventing transmission */ + +#define D_STAT1_TXEN 1 /* Transmit INTERRUPTS enabled */ +#define D_STAT1_RXEN 2 /* Receiver INTERRUPTS enabled */ +#define D_STAT1_MDEN 4 /* Modem (data set sigs) interrupts enabled */ +#define D_STAT1_RLM 8 /* Remote loopback mode selected */ +#define D_STAT1_LLM 0x10 /* Local internal loopback mode selected */ +#define D_STAT1_CTS 0x20 /* CTS is low, preventing transmission */ +#define D_STAT1_DTR 0x40 /* DTR is low, to stop remote transmission */ +#define D_STAT1_RTS 0x80 /* RTS is low, to stop remote transmission */ + +#define D_STAT2_TXMT 1 /* Transmit buffers are all empty */ +#define D_STAT2_RXMT 2 /* Receive buffers are all empty */ +#define D_STAT2_RXINH 4 /* Loadware has tried to inhibit remote + * transmission: dropped DTR, sent XOFF, + * whatever... + */ +#define D_STAT2_RXFLO 8 /* Loadware can send no more data to host + * until it receives a flow-control packet + */ +//----------------------------------------- +// STAT_TXCNT and STAT_RXCNT packets +//---------------------------------------- + +typedef struct _cntStat +{ + unsigned short cs_time; // (Assumes host is little-endian!) + unsigned short cs_count; +} cntStat, *cntStatPtr; + +// These packets are sent in response to a CMD_GET_RXCNT or a CMD_GET_TXCNT +// bypass command. cs_time is a running 1 Millisecond counter which acts as a +// time stamp. cs_count is a running counter of data sent or received from the +// uxarts. (Not including data added by the chip itself, as with CRLF +// processing). +//------------------------------------------ +// STAT_HWFAIL packets +//------------------------------------------ + +typedef struct _failStat +{ + unsigned char fs_written; + unsigned char fs_read; + unsigned short fs_address; +} failStat, *failStatPtr; + +// This packet is sent whenever the on-board diagnostic process detects an +// error. At startup, this process is dormant. The host can wake it up by +// issuing the bypass command CMD_HW_TEST. The process runs at low priority and +// performs continuous hardware verification; writing data to certain on-board +// registers, reading it back, and comparing. If it detects an error, this +// packet is sent to the host, and the process goes dormant again until the host +// sends another CMD_HW_TEST. It then continues with the next register to be +// tested. + +//------------------------------------------------------------------------------ +// Macros to deal with the headers more easily! Note that these are defined so +// they may be used as "left" as well as "right" expressions. +//------------------------------------------------------------------------------ + +// Given a pointer to the packet, reference the channel number +// +#define CHANNEL_OF(pP) ((i2DataHeaderPtr)(pP))->i2sChannel + +// Given a pointer to the packet, reference the Packet type +// +#define PTYPE_OF(pP) ((i2DataHeaderPtr)(pP))->i2sType + +// The possible types of packets +// +#define PTYPE_DATA 0 /* Host <--> Board */ +#define PTYPE_BYPASS 1 /* Host ---> Board */ +#define PTYPE_INLINE 2 /* Host ---> Board */ +#define PTYPE_STATUS 2 /* Host <--- Board */ + +// Given a pointer to a Data packet, reference the Tag +// +#define TAG_OF(pP) ((i2DataHeaderPtr)(pP))->i2sTag + +// Given a pointer to a Data packet, reference the data i.d. +// +#define ID_OF(pP) ((i2DataHeaderPtr)(pP))->i2sId + +// The possible types of ID's +// +#define ID_ORDINARY_DATA 0 +#define ID_HOT_KEY 1 + +// Given a pointer to a Data packet, reference the count +// +#define DATA_COUNT_OF(pP) ((i2DataHeaderPtr)(pP))->i2sCount + +// Given a pointer to a Data packet, reference the beginning of data +// +#define DATA_OF(pP) &((unsigned char *)(pP))[4] // 4 = size of header + +// Given a pointer to a Non-Data packet, reference the count +// +#define CMD_COUNT_OF(pP) ((i2CmdHeaderPtr)(pP))->i2sCount + +#define MAX_CMD_PACK_SIZE 62 // Maximum size of such a count + +// Given a pointer to a Non-Data packet, reference the beginning of data +// +#define CMD_OF(pP) &((unsigned char *)(pP))[2] // 2 = size of header + +//-------------------------------- +// MailBox Bits: +//-------------------------------- + +//-------------------------- +// Outgoing (host to board) +//-------------------------- +// +#define MB_OUT_STUFFED 0x80 // Host has placed output in fifo +#define MB_IN_STRIPPED 0x40 // Host has read in all input from fifo + +//-------------------------- +// Incoming (board to host) +//-------------------------- +// +#define MB_IN_STUFFED 0x80 // Board has placed input in fifo +#define MB_OUT_STRIPPED 0x40 // Board has read all output from fifo +#define MB_FATAL_ERROR 0x20 // Board has encountered a fatal error + +#pragma pack() // Reset padding to command-line default + +#endif // I2PACK_H + diff --git a/drivers/staging/tty/ip2/ip2.h b/drivers/staging/tty/ip2/ip2.h new file mode 100644 index 000000000000..936ccc533949 --- /dev/null +++ b/drivers/staging/tty/ip2/ip2.h @@ -0,0 +1,107 @@ +/******************************************************************************* +* +* (c) 1998 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Driver constants for configuration and tuning +* +* NOTES: +* +*******************************************************************************/ +#ifndef IP2_H +#define IP2_H + +#include "ip2types.h" +#include "i2cmd.h" + +/*************/ +/* Constants */ +/*************/ + +/* Device major numbers - since version 2.0.26. */ +#define IP2_TTY_MAJOR 71 +#define IP2_CALLOUT_MAJOR 72 +#define IP2_IPL_MAJOR 73 + +/* Board configuration array. + * This array defines the hardware irq and address for up to IP2_MAX_BOARDS + * (4 supported per ip2_types.h) ISA board addresses and irqs MUST be specified, + * PCI and EISA boards are probed for and automagicly configed + * iff the addresses are set to 1 and 2 respectivily. + * 0x0100 - 0x03f0 == ISA + * 1 == PCI + * 2 == EISA + * 0 == (skip this board) + * This array defines the hardware addresses for them. Special + * addresses are EISA and PCI which go sniffing for boards. + + * In a multiboard system the position in the array determines which port + * devices are assigned to each board: + * board 0 is assigned ttyF0.. to ttyF63, + * board 1 is assigned ttyF64 to ttyF127, + * board 2 is assigned ttyF128 to ttyF191, + * board 3 is assigned ttyF192 to ttyF255. + * + * In PCI and EISA bus systems each range is mapped to card in + * monotonically increasing slot number order, ISA position is as specified + * here. + + * If the irqs are ALL set to 0,0,0,0 all boards operate in + * polled mode. For interrupt operation ISA boards require that the IRQ be + * specified, while PCI and EISA boards any nonzero entry + * will enable interrupts using the BIOS configured irq for the board. + * An invalid irq entry will default to polled mode for that card and print + * console warning. + + * When the driver is loaded as a module these setting can be overridden on the + * modprobe command line or on an option line in /etc/modprobe.conf. + * If the driver is built-in the configuration must be + * set here for ISA cards and address set to 1 and 2 for PCI and EISA. + * + * Here is an example that shows most if not all possibe combinations: + + *static ip2config_t ip2config = + *{ + * {11,1,0,0}, // irqs + * { // Addresses + * 0x0308, // Board 0, ttyF0 - ttyF63// ISA card at io=0x308, irq=11 + * 0x0001, // Board 1, ttyF64 - ttyF127//PCI card configured by BIOS + * 0x0000, // Board 2, ttyF128 - ttyF191// Slot skipped + * 0x0002 // Board 3, ttyF192 - ttyF255//EISA card configured by BIOS + * // but polled not irq driven + * } + *}; + */ + + /* this structure is zeroed out because the suggested method is to configure + * the driver as a module, set up the parameters with an options line in + * /etc/modprobe.conf and load with modprobe or kmod, the kernel + * module loader + */ + + /* This structure is NOW always initialized when the driver is initialized. + * Compiled in defaults MUST be added to the io and irq arrays in + * ip2.c. Those values are configurable from insmod parameters in the + * case of modules or from command line parameters (ip2=io,irq) when + * compiled in. + */ + +static ip2config_t ip2config = +{ + {0,0,0,0}, // irqs + { // Addresses + /* Do NOT set compile time defaults HERE! Use the arrays in + ip2.c! These WILL be overwritten! =mhw= */ + 0x0000, // Board 0, ttyF0 - ttyF63 + 0x0000, // Board 1, ttyF64 - ttyF127 + 0x0000, // Board 2, ttyF128 - ttyF191 + 0x0000 // Board 3, ttyF192 - ttyF255 + } +}; + +#endif diff --git a/drivers/staging/tty/ip2/ip2ioctl.h b/drivers/staging/tty/ip2/ip2ioctl.h new file mode 100644 index 000000000000..aa0a9da85e05 --- /dev/null +++ b/drivers/staging/tty/ip2/ip2ioctl.h @@ -0,0 +1,35 @@ +/******************************************************************************* +* +* (c) 1998 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Driver constants for configuration and tuning +* +* NOTES: +* +*******************************************************************************/ + +#ifndef IP2IOCTL_H +#define IP2IOCTL_H + +//************* +//* Constants * +//************* + +// High baud rates (if not defined elsewhere. +#ifndef B153600 +# define B153600 0010005 +#endif +#ifndef B307200 +# define B307200 0010006 +#endif +#ifndef B921600 +# define B921600 0010007 +#endif + +#endif diff --git a/drivers/staging/tty/ip2/ip2main.c b/drivers/staging/tty/ip2/ip2main.c new file mode 100644 index 000000000000..ea7a8fb08283 --- /dev/null +++ b/drivers/staging/tty/ip2/ip2main.c @@ -0,0 +1,3234 @@ +/* +* +* (c) 1999 by Computone Corporation +* +******************************************************************************** +* +* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Mainline code for the device driver +* +*******************************************************************************/ +// ToDo: +// +// Fix the immediate DSS_NOW problem. +// Work over the channel stats return logic in ip2_ipl_ioctl so they +// make sense for all 256 possible channels and so the user space +// utilities will compile and work properly. +// +// Done: +// +// 1.2.14 /\/\|=mhw=|\/\/ +// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts. +// Changed the definition of ip2trace to be more consistent with kernel style +// Thanks to Andreas Dilger for these updates +// +// 1.2.13 /\/\|=mhw=|\/\/ +// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform +// to agreed devfs serial device naming convention. +// +// 1.2.12 /\/\|=mhw=|\/\/ +// Cleaned up some remove queue cut and paste errors +// +// 1.2.11 /\/\|=mhw=|\/\/ +// Clean up potential NULL pointer dereferences +// Clean up devfs registration +// Add kernel command line parsing for io and irq +// Compile defaults for io and irq are now set in ip2.c not ip2.h! +// Reworked poll_only hack for explicit parameter setting +// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0 +// Merged ip2_loadmain and old_ip2_init +// Converted all instances of interruptible_sleep_on into queue calls +// Most of these had no race conditions but better to clean up now +// +// 1.2.10 /\/\|=mhw=|\/\/ +// Fixed the bottom half interrupt handler and enabled USE_IQI +// to split the interrupt handler into a formal top-half / bottom-half +// Fixed timing window on high speed processors that queued messages to +// the outbound mail fifo faster than the board could handle. +// +// 1.2.9 +// Four box EX was barfing on >128k kmalloc, made structure smaller by +// reducing output buffer size +// +// 1.2.8 +// Device file system support (MHW) +// +// 1.2.7 +// Fixed +// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules +// +// 1.2.6 +//Fixes DCD problems +// DCD was not reported when CLOCAL was set on call to TIOCMGET +// +//Enhancements: +// TIOCMGET requests and waits for status return +// No DSS interrupts enabled except for DCD when needed +// +// For internal use only +// +//#define IP2DEBUG_INIT +//#define IP2DEBUG_OPEN +//#define IP2DEBUG_WRITE +//#define IP2DEBUG_READ +//#define IP2DEBUG_IOCTL +//#define IP2DEBUG_IPL + +//#define IP2DEBUG_TRACE +//#define DEBUG_FIFO + +/************/ +/* Includes */ +/************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#include "ip2types.h" +#include "ip2trace.h" +#include "ip2ioctl.h" +#include "ip2.h" +#include "i2ellis.h" +#include "i2lib.h" + +/***************** + * /proc/ip2mem * + *****************/ + +#include +#include + +static DEFINE_MUTEX(ip2_mutex); +static const struct file_operations ip2mem_proc_fops; +static const struct file_operations ip2_proc_fops; + +/********************/ +/* Type Definitions */ +/********************/ + +/*************/ +/* Constants */ +/*************/ + +/* String constants to identify ourselves */ +static const char pcName[] = "Computone IntelliPort Plus multiport driver"; +static const char pcVersion[] = "1.2.14"; + +/* String constants for port names */ +static const char pcDriver_name[] = "ip2"; +static const char pcIpl[] = "ip2ipl"; + +/***********************/ +/* Function Prototypes */ +/***********************/ + +/* Global module entry functions */ + +/* Private (static) functions */ +static int ip2_open(PTTY, struct file *); +static void ip2_close(PTTY, struct file *); +static int ip2_write(PTTY, const unsigned char *, int); +static int ip2_putchar(PTTY, unsigned char); +static void ip2_flush_chars(PTTY); +static int ip2_write_room(PTTY); +static int ip2_chars_in_buf(PTTY); +static void ip2_flush_buffer(PTTY); +static int ip2_ioctl(PTTY, UINT, ULONG); +static void ip2_set_termios(PTTY, struct ktermios *); +static void ip2_set_line_discipline(PTTY); +static void ip2_throttle(PTTY); +static void ip2_unthrottle(PTTY); +static void ip2_stop(PTTY); +static void ip2_start(PTTY); +static void ip2_hangup(PTTY); +static int ip2_tiocmget(struct tty_struct *tty); +static int ip2_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int ip2_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount); + +static void set_irq(int, int); +static void ip2_interrupt_bh(struct work_struct *work); +static irqreturn_t ip2_interrupt(int irq, void *dev_id); +static void ip2_poll(unsigned long arg); +static inline void service_all_boards(void); +static void do_input(struct work_struct *); +static void do_status(struct work_struct *); + +static void ip2_wait_until_sent(PTTY,int); + +static void set_params (i2ChanStrPtr, struct ktermios *); +static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *); +static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *); + +static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *); +static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *); +static long ip2_ipl_ioctl(struct file *, UINT, ULONG); +static int ip2_ipl_open(struct inode *, struct file *); + +static int DumpTraceBuffer(char __user *, int); +static int DumpFifoBuffer( char __user *, int); + +static void ip2_init_board(int, const struct firmware *); +static unsigned short find_eisa_board(int); +static int ip2_setup(char *str); + +/***************/ +/* Static Data */ +/***************/ + +static struct tty_driver *ip2_tty_driver; + +/* Here, then is a table of board pointers which the interrupt routine should + * scan through to determine who it must service. + */ +static unsigned short i2nBoards; // Number of boards here + +static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS]; + +static i2ChanStrPtr DevTable[IP2_MAX_PORTS]; +//DevTableMem just used to save addresses for kfree +static void *DevTableMem[IP2_MAX_BOARDS]; + +/* This is the driver descriptor for the ip2ipl device, which is used to + * download the loadware to the boards. + */ +static const struct file_operations ip2_ipl = { + .owner = THIS_MODULE, + .read = ip2_ipl_read, + .write = ip2_ipl_write, + .unlocked_ioctl = ip2_ipl_ioctl, + .open = ip2_ipl_open, + .llseek = noop_llseek, +}; + +static unsigned long irq_counter; +static unsigned long bh_counter; + +// Use immediate queue to service interrupts +#define USE_IQI +//#define USE_IQ // PCI&2.2 needs work + +/* The timer_list entry for our poll routine. If interrupt operation is not + * selected, the board is serviced periodically to see if anything needs doing. + */ +#define POLL_TIMEOUT (jiffies + 1) +static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0); + +#ifdef IP2DEBUG_TRACE +/* Trace (debug) buffer data */ +#define TRACEMAX 1000 +static unsigned long tracebuf[TRACEMAX]; +static int tracestuff; +static int tracestrip; +static int tracewrap; +#endif + +/**********/ +/* Macros */ +/**********/ + +#ifdef IP2DEBUG_OPEN +#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \ + tty->name,(pCh->flags), \ + tty->count,/*GET_USE_COUNT(module)*/0,s) +#else +#define DBG_CNT(s) +#endif + +/********/ +/* Code */ +/********/ + +#include "i2ellis.c" /* Extremely low-level interface services */ +#include "i2cmd.c" /* Standard loadware command definitions */ +#include "i2lib.c" /* High level interface services */ + +/* Configuration area for modprobe */ + +MODULE_AUTHOR("Doug McNash"); +MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); +MODULE_LICENSE("GPL"); + +#define MAX_CMD_STR 50 + +static int poll_only; +static char cmd[MAX_CMD_STR]; + +static int Eisa_irq; +static int Eisa_slot; + +static int iindx; +static char rirqs[IP2_MAX_BOARDS]; +static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; + +/* Note: Add compiled in defaults to these arrays, not to the structure + in ip2.h any longer. That structure WILL get overridden + by these values, or command line values, or insmod values!!! =mhw= +*/ +static int io[IP2_MAX_BOARDS]; +static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 }; + +MODULE_AUTHOR("Doug McNash"); +MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); +module_param_array(irq, int, NULL, 0); +MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards"); +module_param_array(io, int, NULL, 0); +MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards"); +module_param(poll_only, bool, 0); +MODULE_PARM_DESC(poll_only, "Do not use card interrupts"); +module_param_string(ip2, cmd, MAX_CMD_STR, 0); +MODULE_PARM_DESC(ip2, "Contains module parameter passed with 'ip2='"); + +/* for sysfs class support */ +static struct class *ip2_class; + +/* Some functions to keep track of what irqs we have */ + +static int __init is_valid_irq(int irq) +{ + int *i = Valid_Irqs; + + while (*i != 0 && *i != irq) + i++; + + return *i; +} + +static void __init mark_requested_irq(char irq) +{ + rirqs[iindx++] = irq; +} + +static int __exit clear_requested_irq(char irq) +{ + int i; + for (i = 0; i < IP2_MAX_BOARDS; ++i) { + if (rirqs[i] == irq) { + rirqs[i] = 0; + return 1; + } + } + return 0; +} + +static int have_requested_irq(char irq) +{ + /* array init to zeros so 0 irq will not be requested as a side + * effect */ + int i; + for (i = 0; i < IP2_MAX_BOARDS; ++i) + if (rirqs[i] == irq) + return 1; + return 0; +} + +/******************************************************************************/ +/* Function: cleanup_module() */ +/* Parameters: None */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This is a required entry point for an installable module. It has to return */ +/* the device and the driver to a passive state. It should not be necessary */ +/* to reset the board fully, especially as the loadware is downloaded */ +/* externally rather than in the driver. We just want to disable the board */ +/* and clear the loadware to a reset state. To allow this there has to be a */ +/* way to detect whether the board has the loadware running at init time to */ +/* handle subsequent installations of the driver. All memory allocated by the */ +/* driver should be returned since it may be unloaded from memory. */ +/******************************************************************************/ +static void __exit ip2_cleanup_module(void) +{ + int err; + int i; + + del_timer_sync(&PollTimer); + + /* Reset the boards we have. */ + for (i = 0; i < IP2_MAX_BOARDS; i++) + if (i2BoardPtrTable[i]) + iiReset(i2BoardPtrTable[i]); + + /* The following is done at most once, if any boards were installed. */ + for (i = 0; i < IP2_MAX_BOARDS; i++) { + if (i2BoardPtrTable[i]) { + iiResetDelay(i2BoardPtrTable[i]); + /* free io addresses and Tibet */ + release_region(ip2config.addr[i], 8); + device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i)); + device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, + 4 * i + 1)); + } + /* Disable and remove interrupt handler. */ + if (ip2config.irq[i] > 0 && + have_requested_irq(ip2config.irq[i])) { + free_irq(ip2config.irq[i], (void *)&pcName); + clear_requested_irq(ip2config.irq[i]); + } + } + class_destroy(ip2_class); + err = tty_unregister_driver(ip2_tty_driver); + if (err) + printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", + err); + put_tty_driver(ip2_tty_driver); + unregister_chrdev(IP2_IPL_MAJOR, pcIpl); + remove_proc_entry("ip2mem", NULL); + + /* free memory */ + for (i = 0; i < IP2_MAX_BOARDS; i++) { + void *pB; +#ifdef CONFIG_PCI + if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) { + pci_disable_device(ip2config.pci_dev[i]); + pci_dev_put(ip2config.pci_dev[i]); + ip2config.pci_dev[i] = NULL; + } +#endif + pB = i2BoardPtrTable[i]; + if (pB != NULL) { + kfree(pB); + i2BoardPtrTable[i] = NULL; + } + if (DevTableMem[i] != NULL) { + kfree(DevTableMem[i]); + DevTableMem[i] = NULL; + } + } +} +module_exit(ip2_cleanup_module); + +static const struct tty_operations ip2_ops = { + .open = ip2_open, + .close = ip2_close, + .write = ip2_write, + .put_char = ip2_putchar, + .flush_chars = ip2_flush_chars, + .write_room = ip2_write_room, + .chars_in_buffer = ip2_chars_in_buf, + .flush_buffer = ip2_flush_buffer, + .ioctl = ip2_ioctl, + .throttle = ip2_throttle, + .unthrottle = ip2_unthrottle, + .set_termios = ip2_set_termios, + .set_ldisc = ip2_set_line_discipline, + .stop = ip2_stop, + .start = ip2_start, + .hangup = ip2_hangup, + .tiocmget = ip2_tiocmget, + .tiocmset = ip2_tiocmset, + .get_icount = ip2_get_icount, + .proc_fops = &ip2_proc_fops, +}; + +/******************************************************************************/ +/* Function: ip2_loadmain() */ +/* Parameters: irq, io from command line of insmod et. al. */ +/* pointer to fip firmware and firmware size for boards */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/* This was the required entry point for all drivers (now in ip2.c) */ +/* It performs all */ +/* initialisation of the devices and driver structures, and registers itself */ +/* with the relevant kernel modules. */ +/******************************************************************************/ +/* IRQF_DISABLED - if set blocks all interrupts else only this line */ +/* IRQF_SHARED - for shared irq PCI or maybe EISA only */ +/* SA_RANDOM - can be source for cert. random number generators */ +#define IP2_SA_FLAGS 0 + + +static const struct firmware *ip2_request_firmware(void) +{ + struct platform_device *pdev; + const struct firmware *fw; + + pdev = platform_device_register_simple("ip2", 0, NULL, 0); + if (IS_ERR(pdev)) { + printk(KERN_ERR "Failed to register platform device for ip2\n"); + return NULL; + } + if (request_firmware(&fw, "intelliport2.bin", &pdev->dev)) { + printk(KERN_ERR "Failed to load firmware 'intelliport2.bin'\n"); + fw = NULL; + } + platform_device_unregister(pdev); + return fw; +} + +/****************************************************************************** + * ip2_setup: + * str: kernel command line string + * + * Can't autoprobe the boards so user must specify configuration on + * kernel command line. Sane people build it modular but the others + * come here. + * + * Alternating pairs of io,irq for up to 4 boards. + * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 + * + * io=0 => No board + * io=1 => PCI + * io=2 => EISA + * else => ISA I/O address + * + * irq=0 or invalid for ISA will revert to polling mode + * + * Any value = -1, do not overwrite compiled in value. + * + ******************************************************************************/ +static int __init ip2_setup(char *str) +{ + int j, ints[10]; /* 4 boards, 2 parameters + 2 */ + unsigned int i; + + str = get_options(str, ARRAY_SIZE(ints), ints); + + for (i = 0, j = 1; i < 4; i++) { + if (j > ints[0]) + break; + if (ints[j] >= 0) + io[i] = ints[j]; + j++; + if (j > ints[0]) + break; + if (ints[j] >= 0) + irq[i] = ints[j]; + j++; + } + return 1; +} +__setup("ip2=", ip2_setup); + +static int __init ip2_loadmain(void) +{ + int i, j, box; + int err = 0; + i2eBordStrPtr pB = NULL; + int rc = -1; + const struct firmware *fw = NULL; + char *str; + + str = cmd; + + if (poll_only) { + /* Hard lock the interrupts to zero */ + irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0; + } + + /* Check module parameter with 'ip2=' has been passed or not */ + if (!poll_only && (!strncmp(str, "ip2=", 4))) + ip2_setup(str); + + ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0); + + /* process command line arguments to modprobe or + insmod i.e. iop & irqp */ + /* irqp and iop should ALWAYS be specified now... But we check + them individually just to be sure, anyways... */ + for (i = 0; i < IP2_MAX_BOARDS; ++i) { + ip2config.addr[i] = io[i]; + if (irq[i] >= 0) + ip2config.irq[i] = irq[i]; + else + ip2config.irq[i] = 0; + /* This is a little bit of a hack. If poll_only=1 on command + line back in ip2.c OR all IRQs on all specified boards are + explicitly set to 0, then drop to poll only mode and override + PCI or EISA interrupts. This superceeds the old hack of + triggering if all interrupts were zero (like da default). + Still a hack but less prone to random acts of terrorism. + + What we really should do, now that the IRQ default is set + to -1, is to use 0 as a hard coded, do not probe. + + /\/\|=mhw=|\/\/ + */ + poll_only |= irq[i]; + } + poll_only = !poll_only; + + /* Announce our presence */ + printk(KERN_INFO "%s version %s\n", pcName, pcVersion); + + ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS); + if (!ip2_tty_driver) + return -ENOMEM; + + /* Initialise all the boards we can find (up to the maximum). */ + for (i = 0; i < IP2_MAX_BOARDS; ++i) { + switch (ip2config.addr[i]) { + case 0: /* skip this slot even if card is present */ + break; + default: /* ISA */ + /* ISA address must be specified */ + if (ip2config.addr[i] < 0x100 || + ip2config.addr[i] > 0x3f8) { + printk(KERN_ERR "IP2: Bad ISA board %d " + "address %x\n", i, + ip2config.addr[i]); + ip2config.addr[i] = 0; + break; + } + ip2config.type[i] = ISA; + + /* Check for valid irq argument, set for polling if + * invalid */ + if (ip2config.irq[i] && + !is_valid_irq(ip2config.irq[i])) { + printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n", + ip2config.irq[i]); + /* 0 is polling and is valid in that sense */ + ip2config.irq[i] = 0; + } + break; + case PCI: +#ifdef CONFIG_PCI + { + struct pci_dev *pdev = NULL; + u32 addr; + int status; + + pdev = pci_get_device(PCI_VENDOR_ID_COMPUTONE, + PCI_DEVICE_ID_COMPUTONE_IP2EX, pdev); + if (pdev == NULL) { + ip2config.addr[i] = 0; + printk(KERN_ERR "IP2: PCI board %d not " + "found\n", i); + break; + } + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, "can't enable device\n"); + goto out; + } + ip2config.type[i] = PCI; + ip2config.pci_dev[i] = pci_dev_get(pdev); + status = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1, + &addr); + if (addr & 1) + ip2config.addr[i] = (USHORT)(addr & 0xfffe); + else + dev_err(&pdev->dev, "I/O address error\n"); + + ip2config.irq[i] = pdev->irq; +out: + pci_dev_put(pdev); + } +#else + printk(KERN_ERR "IP2: PCI card specified but PCI " + "support not enabled.\n"); + printk(KERN_ERR "IP2: Recompile kernel with CONFIG_PCI " + "defined!\n"); +#endif /* CONFIG_PCI */ + break; + case EISA: + ip2config.addr[i] = find_eisa_board(Eisa_slot + 1); + if (ip2config.addr[i] != 0) { + /* Eisa_irq set as side effect, boo */ + ip2config.type[i] = EISA; + } + ip2config.irq[i] = Eisa_irq; + break; + } /* switch */ + } /* for */ + + for (i = 0; i < IP2_MAX_BOARDS; ++i) { + if (ip2config.addr[i]) { + pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL); + if (pB) { + i2BoardPtrTable[i] = pB; + iiSetAddress(pB, ip2config.addr[i], + ii2DelayTimer); + iiReset(pB); + } else + printk(KERN_ERR "IP2: board memory allocation " + "error\n"); + } + } + for (i = 0; i < IP2_MAX_BOARDS; ++i) { + pB = i2BoardPtrTable[i]; + if (pB != NULL) { + iiResetDelay(pB); + break; + } + } + for (i = 0; i < IP2_MAX_BOARDS; ++i) { + /* We don't want to request the firmware unless we have at + least one board */ + if (i2BoardPtrTable[i] != NULL) { + if (!fw) + fw = ip2_request_firmware(); + if (!fw) + break; + ip2_init_board(i, fw); + } + } + if (fw) + release_firmware(fw); + + ip2trace(ITRC_NO_PORT, ITRC_INIT, 2, 0); + + ip2_tty_driver->owner = THIS_MODULE; + ip2_tty_driver->name = "ttyF"; + ip2_tty_driver->driver_name = pcDriver_name; + ip2_tty_driver->major = IP2_TTY_MAJOR; + ip2_tty_driver->minor_start = 0; + ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL; + ip2_tty_driver->init_termios = tty_std_termios; + ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(ip2_tty_driver, &ip2_ops); + + ip2trace(ITRC_NO_PORT, ITRC_INIT, 3, 0); + + err = tty_register_driver(ip2_tty_driver); + if (err) { + printk(KERN_ERR "IP2: failed to register tty driver\n"); + put_tty_driver(ip2_tty_driver); + return err; /* leaking resources */ + } + + err = register_chrdev(IP2_IPL_MAJOR, pcIpl, &ip2_ipl); + if (err) { + printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", + err); + } else { + /* create the sysfs class */ + ip2_class = class_create(THIS_MODULE, "ip2"); + if (IS_ERR(ip2_class)) { + err = PTR_ERR(ip2_class); + goto out_chrdev; + } + } + /* Register the read_procmem thing */ + if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) { + printk(KERN_ERR "IP2: failed to register read_procmem\n"); + return -EIO; /* leaking resources */ + } + + ip2trace(ITRC_NO_PORT, ITRC_INIT, 4, 0); + /* Register the interrupt handler or poll handler, depending upon the + * specified interrupt. + */ + + for (i = 0; i < IP2_MAX_BOARDS; ++i) { + if (ip2config.addr[i] == 0) + continue; + + pB = i2BoardPtrTable[i]; + if (pB != NULL) { + device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i), + NULL, "ipl%d", i); + device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i + 1), + NULL, "stat%d", i); + + for (box = 0; box < ABS_MAX_BOXES; box++) + for (j = 0; j < ABS_BIGGEST_BOX; j++) + if (pB->i2eChannelMap[box] & (1 << j)) + tty_register_device( + ip2_tty_driver, + j + ABS_BIGGEST_BOX * + (box+i*ABS_MAX_BOXES), + NULL); + } + + if (poll_only) { + /* Poll only forces driver to only use polling and + to ignore the probed PCI or EISA interrupts. */ + ip2config.irq[i] = CIR_POLL; + } + if (ip2config.irq[i] == CIR_POLL) { +retry: + if (!timer_pending(&PollTimer)) { + mod_timer(&PollTimer, POLL_TIMEOUT); + printk(KERN_INFO "IP2: polling\n"); + } + } else { + if (have_requested_irq(ip2config.irq[i])) + continue; + rc = request_irq(ip2config.irq[i], ip2_interrupt, + IP2_SA_FLAGS | + (ip2config.type[i] == PCI ? IRQF_SHARED : 0), + pcName, i2BoardPtrTable[i]); + if (rc) { + printk(KERN_ERR "IP2: request_irq failed: " + "error %d\n", rc); + ip2config.irq[i] = CIR_POLL; + printk(KERN_INFO "IP2: Polling %ld/sec.\n", + (POLL_TIMEOUT - jiffies)); + goto retry; + } + mark_requested_irq(ip2config.irq[i]); + /* Initialise the interrupt handler bottom half + * (aka slih). */ + } + } + + for (i = 0; i < IP2_MAX_BOARDS; ++i) { + if (i2BoardPtrTable[i]) { + /* set and enable board interrupt */ + set_irq(i, ip2config.irq[i]); + } + } + + ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0); + + return 0; + +out_chrdev: + unregister_chrdev(IP2_IPL_MAJOR, "ip2"); + /* unregister and put tty here */ + return err; +} +module_init(ip2_loadmain); + +/******************************************************************************/ +/* Function: ip2_init_board() */ +/* Parameters: Index of board in configuration structure */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/* This function initializes the specified board. The loadware is copied to */ +/* the board, the channel structures are initialized, and the board details */ +/* are reported on the console. */ +/******************************************************************************/ +static void +ip2_init_board(int boardnum, const struct firmware *fw) +{ + int i; + int nports = 0, nboxes = 0; + i2ChanStrPtr pCh; + i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; + + if ( !iiInitialize ( pB ) ) { + printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n", + pB->i2eBase, pB->i2eError ); + goto err_initialize; + } + printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1, + ip2config.addr[boardnum], ip2config.irq[boardnum] ); + + if (!request_region( ip2config.addr[boardnum], 8, pcName )) { + printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]); + goto err_initialize; + } + + if ( iiDownloadAll ( pB, (loadHdrStrPtr)fw->data, 1, fw->size ) + != II_DOWN_GOOD ) { + printk ( KERN_ERR "IP2: failed to download loadware\n" ); + goto err_release_region; + } else { + printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n", + pB->i2ePom.e.porVersion, + pB->i2ePom.e.porRevision, + pB->i2ePom.e.porSubRev, pB->i2eLVersion, + pB->i2eLRevision, pB->i2eLSub ); + } + + switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) { + + default: + printk( KERN_ERR "IP2: Unknown board type, ID = %x\n", + pB->i2ePom.e.porID ); + nports = 0; + goto err_release_region; + break; + + case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */ + printk ( KERN_INFO "IP2: ISA-4\n" ); + nports = 4; + break; + + case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */ + printk ( KERN_INFO "IP2: ISA-8 std\n" ); + nports = 8; + break; + + case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */ + printk ( KERN_INFO "IP2: ISA-8 RJ11\n" ); + nports = 8; + break; + + case POR_ID_FIIEX: /* IntelliPort IIEX */ + { + int portnum = IP2_PORTS_PER_BOARD * boardnum; + int box; + + for( box = 0; box < ABS_MAX_BOXES; ++box ) { + if ( pB->i2eChannelMap[box] != 0 ) { + ++nboxes; + } + for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { + if ( pB->i2eChannelMap[box] & 1<< i ) { + ++nports; + } + } + } + DevTableMem[boardnum] = pCh = + kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL ); + if ( !pCh ) { + printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); + goto err_release_region; + } + if ( !i2InitChannels( pB, nports, pCh ) ) { + printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); + kfree ( pCh ); + goto err_release_region; + } + pB->i2eChannelPtr = &DevTable[portnum]; + pB->i2eChannelCnt = ABS_MOST_PORTS; + + for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) { + for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { + if ( pB->i2eChannelMap[box] & (1 << i) ) { + DevTable[portnum + i] = pCh; + pCh->port_index = portnum + i; + pCh++; + } + } + } + printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n", + nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 ); + } + goto ex_exit; + } + DevTableMem[boardnum] = pCh = + kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL ); + if ( !pCh ) { + printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); + goto err_release_region; + } + pB->i2eChannelPtr = pCh; + pB->i2eChannelCnt = nports; + if ( !i2InitChannels( pB, nports, pCh ) ) { + printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); + kfree ( pCh ); + goto err_release_region; + } + pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum]; + + for( i = 0; i < pB->i2eChannelCnt; ++i ) { + DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh; + pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i; + pCh++; + } +ex_exit: + INIT_WORK(&pB->tqueue_interrupt, ip2_interrupt_bh); + return; + +err_release_region: + release_region(ip2config.addr[boardnum], 8); +err_initialize: + kfree ( pB ); + i2BoardPtrTable[boardnum] = NULL; + return; +} + +/******************************************************************************/ +/* Function: find_eisa_board ( int start_slot ) */ +/* Parameters: First slot to check */ +/* Returns: Address of EISA IntelliPort II controller */ +/* */ +/* Description: */ +/* This function searches for an EISA IntelliPort controller, starting */ +/* from the specified slot number. If the motherboard is not identified as an */ +/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */ +/* it returns the base address of the controller. */ +/******************************************************************************/ +static unsigned short +find_eisa_board( int start_slot ) +{ + int i, j; + unsigned int idm = 0; + unsigned int idp = 0; + unsigned int base = 0; + unsigned int value; + int setup_address; + int setup_irq; + int ismine = 0; + + /* + * First a check for an EISA motherboard, which we do by comparing the + * EISA ID registers for the system board and the first couple of slots. + * No slot ID should match the system board ID, but on an ISA or PCI + * machine the odds are that an empty bus will return similar values for + * each slot. + */ + i = 0x0c80; + value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3); + for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) { + j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3); + if ( value == j ) + return 0; + } + + /* + * OK, so we are inclined to believe that this is an EISA machine. Find + * an IntelliPort controller. + */ + for( i = start_slot; i < 16; i++ ) { + base = i << 12; + idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff); + idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff); + ismine = 0; + if ( idm == 0x0e8e ) { + if ( idp == 0x0281 || idp == 0x0218 ) { + ismine = 1; + } else if ( idp == 0x0282 || idp == 0x0283 ) { + ismine = 3; /* Can do edge-trigger */ + } + if ( ismine ) { + Eisa_slot = i; + break; + } + } + } + if ( !ismine ) + return 0; + + /* It's some sort of EISA card, but at what address is it configured? */ + + setup_address = base + 0xc88; + value = inb(base + 0xc86); + setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0; + + if ( (ismine & 2) && !(value & 0x10) ) { + ismine = 1; /* Could be edging, but not */ + } + + if ( Eisa_irq == 0 ) { + Eisa_irq = setup_irq; + } else if ( Eisa_irq != setup_irq ) { + printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" ); + } + +#ifdef IP2DEBUG_INIT +printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x", + base >> 12, idm, idp, setup_address); + if ( Eisa_irq ) { + printk(KERN_DEBUG ", Interrupt %d %s\n", + setup_irq, (ismine & 2) ? "(edge)" : "(level)"); + } else { + printk(KERN_DEBUG ", (polled)\n"); + } +#endif + return setup_address; +} + +/******************************************************************************/ +/* Function: set_irq() */ +/* Parameters: index to board in board table */ +/* IRQ to use */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/******************************************************************************/ +static void +set_irq( int boardnum, int boardIrq ) +{ + unsigned char tempCommand[16]; + i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; + unsigned long flags; + + /* + * Notify the boards they may generate interrupts. This is done by + * sending an in-line command to channel 0 on each board. This is why + * the channels have to be defined already. For each board, if the + * interrupt has never been defined, we must do so NOW, directly, since + * board will not send flow control or even give an interrupt until this + * is done. If polling we must send 0 as the interrupt parameter. + */ + + // We will get an interrupt here at the end of this function + + iiDisableMailIrq(pB); + + /* We build up the entire packet header. */ + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_INLINE; + CMD_COUNT_OF(tempCommand) = 2; + (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ; + (CMD_OF(tempCommand))[1] = boardIrq; + /* + * Write to FIFO; don't bother to adjust fifo capacity for this, since + * board will respond almost immediately after SendMail hit. + */ + write_lock_irqsave(&pB->write_fifo_spinlock, flags); + iiWriteBuf(pB, tempCommand, 4); + write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); + pB->i2eUsingIrq = boardIrq; + pB->i2eOutMailWaiting |= MB_OUT_STUFFED; + + /* Need to update number of boards before you enable mailbox int */ + ++i2nBoards; + + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 6; + (CMD_OF(tempCommand))[0] = 88; // SILO + (CMD_OF(tempCommand))[1] = 64; // chars + (CMD_OF(tempCommand))[2] = 32; // ms + + (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK + (CMD_OF(tempCommand))[4] = 64; // chars + + (CMD_OF(tempCommand))[5] = 87; // HW_TEST + write_lock_irqsave(&pB->write_fifo_spinlock, flags); + iiWriteBuf(pB, tempCommand, 8); + write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); + + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 1; + (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */ + iiWriteBuf(pB, tempCommand, 3); + +#ifdef XXX + // enable heartbeat for test porpoises + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 2; + (CMD_OF(tempCommand))[0] = 44; /* get ping */ + (CMD_OF(tempCommand))[1] = 200; /* 200 ms */ + write_lock_irqsave(&pB->write_fifo_spinlock, flags); + iiWriteBuf(pB, tempCommand, 4); + write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); +#endif + + iiEnableMailIrq(pB); + iiSendPendingMail(pB); +} + +/******************************************************************************/ +/* Interrupt Handler Section */ +/******************************************************************************/ + +static inline void +service_all_boards(void) +{ + int i; + i2eBordStrPtr pB; + + /* Service every board on the list */ + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + pB = i2BoardPtrTable[i]; + if ( pB ) { + i2ServiceBoard( pB ); + } + } +} + + +/******************************************************************************/ +/* Function: ip2_interrupt_bh(work) */ +/* Parameters: work - pointer to the board structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* Service the board in a bottom half interrupt handler and then */ +/* reenable the board's interrupts if it has an IRQ number */ +/* */ +/******************************************************************************/ +static void +ip2_interrupt_bh(struct work_struct *work) +{ + i2eBordStrPtr pB = container_of(work, i2eBordStr, tqueue_interrupt); +// pB better well be set or we have a problem! We can only get +// here from the IMMEDIATE queue. Here, we process the boards. +// Checking pB doesn't cost much and it saves us from the sanity checkers. + + bh_counter++; + + if ( pB ) { + i2ServiceBoard( pB ); + if( pB->i2eUsingIrq ) { +// Re-enable his interrupts + iiEnableMailIrq(pB); + } + } +} + + +/******************************************************************************/ +/* Function: ip2_interrupt(int irq, void *dev_id) */ +/* Parameters: irq - interrupt number */ +/* pointer to optional device ID structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* Our task here is simply to identify each board which needs servicing. */ +/* If we are queuing then, queue it to be serviced, and disable its irq */ +/* mask otherwise process the board directly. */ +/* */ +/* We could queue by IRQ but that just complicates things on both ends */ +/* with very little gain in performance (how many instructions does */ +/* it take to iterate on the immediate queue). */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_irq_work(i2eBordStrPtr pB) +{ +#ifdef USE_IQI + if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) { +// Disable his interrupt (will be enabled when serviced) +// This is mostly to protect from reentrancy. + iiDisableMailIrq(pB); + +// Park the board on the immediate queue for processing. + schedule_work(&pB->tqueue_interrupt); + +// Make sure the immediate queue is flagged to fire. + } +#else + +// We are using immediate servicing here. This sucks and can +// cause all sorts of havoc with ppp and others. The failsafe +// check on iiSendPendingMail could also throw a hairball. + + i2ServiceBoard( pB ); + +#endif /* USE_IQI */ +} + +static void +ip2_polled_interrupt(void) +{ + int i; + i2eBordStrPtr pB; + + ip2trace(ITRC_NO_PORT, ITRC_INTR, 99, 1, 0); + + /* Service just the boards on the list using this irq */ + for( i = 0; i < i2nBoards; ++i ) { + pB = i2BoardPtrTable[i]; + +// Only process those boards which match our IRQ. +// IRQ = 0 for polled boards, we won't poll "IRQ" boards + + if (pB && pB->i2eUsingIrq == 0) + ip2_irq_work(pB); + } + + ++irq_counter; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); +} + +static irqreturn_t +ip2_interrupt(int irq, void *dev_id) +{ + i2eBordStrPtr pB = dev_id; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, pB->i2eUsingIrq ); + + ip2_irq_work(pB); + + ++irq_counter; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); + return IRQ_HANDLED; +} + +/******************************************************************************/ +/* Function: ip2_poll(unsigned long arg) */ +/* Parameters: ? */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function calls the library routine i2ServiceBoard for each board in */ +/* the board table. This is used instead of the interrupt routine when polled */ +/* mode is specified. */ +/******************************************************************************/ +static void +ip2_poll(unsigned long arg) +{ + ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 ); + + // Just polled boards, IRQ = 0 will hit all non-interrupt boards. + // It will NOT poll boards handled by hard interrupts. + // The issue of queued BH interrupts is handled in ip2_interrupt(). + ip2_polled_interrupt(); + + mod_timer(&PollTimer, POLL_TIMEOUT); + + ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); +} + +static void do_input(struct work_struct *work) +{ + i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_input); + unsigned long flags; + + ip2trace(CHANN, ITRC_INPUT, 21, 0 ); + + // Data input + if ( pCh->pTTY != NULL ) { + read_lock_irqsave(&pCh->Ibuf_spinlock, flags); + if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) { + read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); + i2Input( pCh ); + } else + read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); + } else { + ip2trace(CHANN, ITRC_INPUT, 22, 0 ); + + i2InputFlush( pCh ); + } +} + +// code duplicated from n_tty (ldisc) +static inline void isig(int sig, struct tty_struct *tty, int flush) +{ + /* FIXME: This is completely bogus */ + if (tty->pgrp) + kill_pgrp(tty->pgrp, sig, 1); + if (flush || !L_NOFLSH(tty)) { + if ( tty->ldisc->ops->flush_buffer ) + tty->ldisc->ops->flush_buffer(tty); + i2InputFlush( tty->driver_data ); + } +} + +static void do_status(struct work_struct *work) +{ + i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_status); + int status; + + status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) ); + + ip2trace (CHANN, ITRC_STATUS, 21, 1, status ); + + if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) { + if ( (status & I2_BRK) ) { + // code duplicated from n_tty (ldisc) + if (I_IGNBRK(pCh->pTTY)) + goto skip_this; + if (I_BRKINT(pCh->pTTY)) { + isig(SIGINT, pCh->pTTY, 1); + goto skip_this; + } + wake_up_interruptible(&pCh->pTTY->read_wait); + } +#ifdef NEVER_HAPPENS_AS_SETUP_XXX + // and can't work because we don't know the_char + // as the_char is reported on a separate path + // The intelligent board does this stuff as setup + { + char brkf = TTY_NORMAL; + unsigned char brkc = '\0'; + unsigned char tmp; + if ( (status & I2_BRK) ) { + brkf = TTY_BREAK; + brkc = '\0'; + } + else if (status & I2_PAR) { + brkf = TTY_PARITY; + brkc = the_char; + } else if (status & I2_FRA) { + brkf = TTY_FRAME; + brkc = the_char; + } else if (status & I2_OVR) { + brkf = TTY_OVERRUN; + brkc = the_char; + } + tmp = pCh->pTTY->real_raw; + pCh->pTTY->real_raw = 0; + pCh->pTTY->ldisc->ops.receive_buf( pCh->pTTY, &brkc, &brkf, 1 ); + pCh->pTTY->real_raw = tmp; + } +#endif /* NEVER_HAPPENS_AS_SETUP_XXX */ + } +skip_this: + + if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) { + wake_up_interruptible(&pCh->delta_msr_wait); + + if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) { + if ( status & I2_DCD ) { + if ( pCh->wopen ) { + wake_up_interruptible ( &pCh->open_wait ); + } + } else { + if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) { + tty_hangup( pCh->pTTY ); + } + } + } + } + + ip2trace (CHANN, ITRC_STATUS, 26, 0 ); +} + +/******************************************************************************/ +/* Device Open/Close/Ioctl Entry Point Section */ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: open_sanity_check() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* Verifies the structure magic numbers and cross links. */ +/******************************************************************************/ +#ifdef IP2DEBUG_OPEN +static void +open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd ) +{ + if ( pBrd->i2eValid != I2E_MAGIC ) { + printk(KERN_ERR "IP2: invalid board structure\n" ); + } else if ( pBrd != pCh->pMyBord ) { + printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n", + pCh->pMyBord ); + } else if ( pBrd->i2eChannelCnt < pCh->port_index ) { + printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index ); + } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) { + } else { + printk(KERN_INFO "IP2: all pointers check out!\n" ); + } +} +#endif + + +/******************************************************************************/ +/* Function: ip2_open() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: (MANDATORY) */ +/* A successful device open has to run a gauntlet of checks before it */ +/* completes. After some sanity checking and pointer setup, the function */ +/* blocks until all conditions are satisfied. It then initialises the port to */ +/* the default characteristics and returns. */ +/******************************************************************************/ +static int +ip2_open( PTTY tty, struct file *pFile ) +{ + wait_queue_t wait; + int rc = 0; + int do_clocal = 0; + i2ChanStrPtr pCh = DevTable[tty->index]; + + ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 ); + + if ( pCh == NULL ) { + return -ENODEV; + } + /* Setup pointer links in device and tty structures */ + pCh->pTTY = tty; + tty->driver_data = pCh; + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG \ + "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n", + tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index); + open_sanity_check ( pCh, pCh->pMyBord ); +#endif + + i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + serviceOutgoingFifo( pCh->pMyBord ); + + /* Block here until the port is ready (per serial and istallion) */ + /* + * 1. If the port is in the middle of closing wait for the completion + * and then return the appropriate error. + */ + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->close_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { + if ( pCh->flags & ASYNC_CLOSING ) { + tty_unlock(); + schedule(); + tty_lock(); + } + if ( tty_hung_up_p(pFile) ) { + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->close_wait, &wait); + return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS; + } + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->close_wait, &wait); + + /* + * 3. Handle a non-blocking open of a normal port. + */ + if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<flags |= ASYNC_NORMAL_ACTIVE; + goto noblock; + } + /* + * 4. Now loop waiting for the port to be free and carrier present + * (if required). + */ + if ( tty->termios->c_cflag & CLOCAL ) + do_clocal = 1; + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal); +#endif + + ++pCh->wopen; + + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->open_wait, &wait); + + for(;;) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + set_current_state( TASK_INTERRUPTIBLE ); + serviceOutgoingFifo( pCh->pMyBord ); + if ( tty_hung_up_p(pFile) ) { + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->open_wait, &wait); + return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS; + } + if (!(pCh->flags & ASYNC_CLOSING) && + (do_clocal || (pCh->dataSetIn & I2_DCD) )) { + rc = 0; + break; + } + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "ASYNC_CLOSING = %s\n", + (pCh->flags & ASYNC_CLOSING)?"True":"False"); + printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n"); +#endif + ip2trace (CHANN, ITRC_OPEN, 3, 2, 0, + (pCh->flags & ASYNC_CLOSING) ); + /* check for signal */ + if (signal_pending(current)) { + rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); + break; + } + tty_unlock(); + schedule(); + tty_lock(); + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->open_wait, &wait); + + --pCh->wopen; //why count? + + ip2trace (CHANN, ITRC_OPEN, 4, 0 ); + + if (rc != 0 ) { + return rc; + } + pCh->flags |= ASYNC_NORMAL_ACTIVE; + +noblock: + + /* first open - Assign termios structure to port */ + if ( tty->count == 1 ) { + i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + /* Now we must send the termios settings to the loadware */ + set_params( pCh, NULL ); + } + + /* + * Now set any i2lib options. These may go away if the i2lib code ends + * up rolled into the mainline. + */ + pCh->channelOptions |= CO_NBLOCK_WRITE; + +#ifdef IP2DEBUG_OPEN + printk (KERN_DEBUG "IP2: open completed\n" ); +#endif + serviceOutgoingFifo( pCh->pMyBord ); + + ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 ); + + return 0; +} + +/******************************************************************************/ +/* Function: ip2_close() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_close( PTTY tty, struct file *pFile ) +{ + i2ChanStrPtr pCh = tty->driver_data; + + if ( !pCh ) { + return; + } + + ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 ); + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "IP2:close %s:\n",tty->name); +#endif + + if ( tty_hung_up_p ( pFile ) ) { + + ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 ); + + return; + } + if ( tty->count > 1 ) { /* not the last close */ + + ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 ); + + return; + } + pCh->flags |= ASYNC_CLOSING; // last close actually + + tty->closing = 1; + + if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) { + /* + * Before we drop DTR, make sure the transmitter has completely drained. + * This uses an timeout, after which the close + * completes. + */ + ip2_wait_until_sent(tty, pCh->ClosingWaitTime ); + } + /* + * At this point we stop accepting input. Here we flush the channel + * input buffer which will allow the board to send up more data. Any + * additional input is tossed at interrupt/poll time. + */ + i2InputFlush( pCh ); + + /* disable DSS reporting */ + i2QueueCommands(PTYPE_INLINE, pCh, 100, 4, + CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + if (tty->termios->c_cflag & HUPCL) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + } + + serviceOutgoingFifo ( pCh->pMyBord ); + + tty_ldisc_flush(tty); + tty_driver_flush_buffer(tty); + tty->closing = 0; + + pCh->pTTY = NULL; + + if (pCh->wopen) { + if (pCh->ClosingDelay) { + msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay)); + } + wake_up_interruptible(&pCh->open_wait); + } + + pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&pCh->close_wait); + +#ifdef IP2DEBUG_OPEN + DBG_CNT("ip2_close: after wakeups--"); +#endif + + + ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 ); + + return; +} + +/******************************************************************************/ +/* Function: ip2_hangup() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_hangup ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + + if( !pCh ) { + return; + } + + ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 ); + + ip2_flush_buffer(tty); + + /* disable DSS reporting */ + + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP); + i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + if ( (tty->termios->c_cflag & HUPCL) ) { + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + } + i2QueueCommands(PTYPE_INLINE, pCh, 1, 3, + CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + serviceOutgoingFifo ( pCh->pMyBord ); + + wake_up_interruptible ( &pCh->delta_msr_wait ); + + pCh->flags &= ~ASYNC_NORMAL_ACTIVE; + pCh->pTTY = NULL; + wake_up_interruptible ( &pCh->open_wait ); + + ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 ); +} + +/******************************************************************************/ +/******************************************************************************/ +/* Device Output Section */ +/******************************************************************************/ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_write() */ +/* Parameters: Pointer to tty structure */ +/* Flag denoting data is in user (1) or kernel (0) space */ +/* Pointer to data */ +/* Number of bytes to write */ +/* Returns: Number of bytes actually written */ +/* */ +/* Description: (MANDATORY) */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_write( PTTY tty, const unsigned char *pData, int count) +{ + i2ChanStrPtr pCh = tty->driver_data; + int bytesSent = 0; + unsigned long flags; + + ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 ); + + /* Flush out any buffered data left over from ip2_putchar() calls. */ + ip2_flush_chars( tty ); + + /* This is the actual move bit. Make sure it does what we need!!!!! */ + write_lock_irqsave(&pCh->Pbuf_spinlock, flags); + bytesSent = i2Output( pCh, pData, count); + write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); + + ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent ); + + return bytesSent > 0 ? bytesSent : 0; +} + +/******************************************************************************/ +/* Function: ip2_putchar() */ +/* Parameters: Pointer to tty structure */ +/* Character to write */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_putchar( PTTY tty, unsigned char ch ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + +// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch ); + + write_lock_irqsave(&pCh->Pbuf_spinlock, flags); + pCh->Pbuf[pCh->Pbuf_stuff++] = ch; + if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) { + write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); + ip2_flush_chars( tty ); + } else + write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); + return 1; + +// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch ); +} + +/******************************************************************************/ +/* Function: ip2_flush_chars() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/******************************************************************************/ +static void +ip2_flush_chars( PTTY tty ) +{ + int strip; + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + write_lock_irqsave(&pCh->Pbuf_spinlock, flags); + if ( pCh->Pbuf_stuff ) { + +// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip ); + + // + // We may need to restart i2Output if it does not fullfill this request + // + strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff); + if ( strip != pCh->Pbuf_stuff ) { + memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip ); + } + pCh->Pbuf_stuff -= strip; + } + write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); +} + +/******************************************************************************/ +/* Function: ip2_write_room() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Number of bytes that the driver can accept */ +/* */ +/* Description: */ +/* */ +/******************************************************************************/ +static int +ip2_write_room ( PTTY tty ) +{ + int bytesFree; + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + read_lock_irqsave(&pCh->Pbuf_spinlock, flags); + bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff; + read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); + + ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree ); + + return ((bytesFree > 0) ? bytesFree : 0); +} + +/******************************************************************************/ +/* Function: ip2_chars_in_buf() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Number of bytes queued for transmission */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_chars_in_buf ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + int rc; + unsigned long flags; + + ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff ); + +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n", + pCh->Obuf_char_count + pCh->Pbuf_stuff, + pCh->Obuf_char_count, pCh->Pbuf_stuff ); +#endif + read_lock_irqsave(&pCh->Obuf_spinlock, flags); + rc = pCh->Obuf_char_count; + read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); + read_lock_irqsave(&pCh->Pbuf_spinlock, flags); + rc += pCh->Pbuf_stuff; + read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); + return rc; +} + +/******************************************************************************/ +/* Function: ip2_flush_buffer() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_flush_buffer( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 ); + +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: flush buffer\n" ); +#endif + write_lock_irqsave(&pCh->Pbuf_spinlock, flags); + pCh->Pbuf_stuff = 0; + write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags); + i2FlushOutput( pCh ); + ip2_owake(tty); + + ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 ); + +} + +/******************************************************************************/ +/* Function: ip2_wait_until_sent() */ +/* Parameters: Pointer to tty structure */ +/* Timeout for wait. */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function is used in place of the normal tty_wait_until_sent, which */ +/* only waits for the driver buffers to be empty (or rather, those buffers */ +/* reported by chars_in_buffer) which doesn't work for IP2 due to the */ +/* indeterminate number of bytes buffered on the board. */ +/******************************************************************************/ +static void +ip2_wait_until_sent ( PTTY tty, int timeout ) +{ + int i = jiffies; + i2ChanStrPtr pCh = tty->driver_data; + + tty_wait_until_sent(tty, timeout ); + if ( (i = timeout - (jiffies -i)) > 0) + i2DrainOutput( pCh, i ); +} + +/******************************************************************************/ +/******************************************************************************/ +/* Device Input Section */ +/******************************************************************************/ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_throttle() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_throttle ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "IP2: throttle\n" ); +#endif + /* + * Signal the poll/interrupt handlers not to forward incoming data to + * the line discipline. This will cause the buffers to fill up in the + * library and thus cause the library routines to send the flow control + * stuff. + */ + pCh->throttled = 1; +} + +/******************************************************************************/ +/* Function: ip2_unthrottle() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_unthrottle ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "IP2: unthrottle\n" ); +#endif + + /* Pass incoming data up to the line discipline again. */ + pCh->throttled = 0; + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); + serviceOutgoingFifo( pCh->pMyBord ); + read_lock_irqsave(&pCh->Ibuf_spinlock, flags); + if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) { + read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "i2Input called from unthrottle\n" ); +#endif + i2Input( pCh ); + } else + read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); +} + +static void +ip2_start ( PTTY tty ) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME); +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: start tx\n" ); +#endif +} + +static void +ip2_stop ( PTTY tty ) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND); +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: stop tx\n" ); +#endif +} + +/******************************************************************************/ +/* Device Ioctl Section */ +/******************************************************************************/ + +static int ip2_tiocmget(struct tty_struct *tty) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; +#ifdef ENABLE_DSSNOW + wait_queue_t wait; +#endif + + if (pCh == NULL) + return -ENODEV; + +/* + FIXME - the following code is causing a NULL pointer dereference in + 2.3.51 in an interrupt handler. It's suppose to prompt the board + to return the DSS signal status immediately. Why doesn't it do + the same thing in 2.2.14? +*/ + +/* This thing is still busted in the 1.2.12 driver on 2.4.x + and even hoses the serial console so the oops can be trapped. + /\/\|=mhw=|\/\/ */ + +#ifdef ENABLE_DSSNOW + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW); + + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->dss_now_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + serviceOutgoingFifo( pCh->pMyBord ); + + schedule(); + + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->dss_now_wait, &wait); + + if (signal_pending(current)) { + return -EINTR; + } +#endif + return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0) + | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0) + | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0) + | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0) + | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0) + | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); +} + +static int ip2_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + if (pCh == NULL) + return -ENODEV; + + if (set & TIOCM_RTS) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP); + pCh->dataSetOut |= I2_RTS; + } + if (set & TIOCM_DTR) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP); + pCh->dataSetOut |= I2_DTR; + } + + if (clear & TIOCM_RTS) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN); + pCh->dataSetOut &= ~I2_RTS; + } + if (clear & TIOCM_DTR) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN); + pCh->dataSetOut &= ~I2_DTR; + } + serviceOutgoingFifo( pCh->pMyBord ); + return 0; +} + +/******************************************************************************/ +/* Function: ip2_ioctl() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Command */ +/* Argument */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_ioctl ( PTTY tty, UINT cmd, ULONG arg ) +{ + wait_queue_t wait; + i2ChanStrPtr pCh = DevTable[tty->index]; + i2eBordStrPtr pB; + struct async_icount cprev, cnow; /* kernel counter temps */ + int rc = 0; + unsigned long flags; + void __user *argp = (void __user *)arg; + + if ( pCh == NULL ) + return -ENODEV; + + pB = pCh->pMyBord; + + ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg ); + +#ifdef IP2DEBUG_IOCTL + printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg ); +#endif + + switch(cmd) { + case TIOCGSERIAL: + + ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc ); + + rc = get_serial_info(pCh, argp); + if (rc) + return rc; + break; + + case TIOCSSERIAL: + + ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc ); + + rc = set_serial_info(pCh, argp); + if (rc) + return rc; + break; + + case TCXONC: + rc = tty_check_change(tty); + if (rc) + return rc; + switch (arg) { + case TCOOFF: + //return -ENOIOCTLCMD; + break; + case TCOON: + //return -ENOIOCTLCMD; + break; + case TCIOFF: + if (STOP_CHAR(tty) != __DISABLED_CHAR) { + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, + CMD_XMIT_NOW(STOP_CHAR(tty))); + } + break; + case TCION: + if (START_CHAR(tty) != __DISABLED_CHAR) { + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, + CMD_XMIT_NOW(START_CHAR(tty))); + } + break; + default: + return -EINVAL; + } + return 0; + + case TCSBRK: /* SVID version: non-zero arg --> no break */ + rc = tty_check_change(tty); + + ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc ); + + if (!rc) { + ip2_wait_until_sent(tty,0); + if (!arg) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250)); + serviceOutgoingFifo( pCh->pMyBord ); + } + } + break; + + case TCSBRKP: /* support for POSIX tcsendbreak() */ + rc = tty_check_change(tty); + + ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc ); + + if (!rc) { + ip2_wait_until_sent(tty,0); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_SEND_BRK(arg ? arg*100 : 250)); + serviceOutgoingFifo ( pCh->pMyBord ); + } + break; + + case TIOCGSOFTCAR: + + ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc ); + + rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); + if (rc) + return rc; + break; + + case TIOCSSOFTCAR: + + ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc ); + + rc = get_user(arg,(unsigned long __user *) argp); + if (rc) + return rc; + tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) + | (arg ? CLOCAL : 0)); + + break; + + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask + * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS + * for masking). Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + write_lock_irqsave(&pB->read_fifo_spinlock, flags); + cprev = pCh->icount; /* note the counters on entry */ + write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4, + CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP); + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->delta_msr_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + serviceOutgoingFifo( pCh->pMyBord ); + for(;;) { + ip2trace (CHANN, ITRC_IOCTL, 10, 0 ); + + schedule(); + + ip2trace (CHANN, ITRC_IOCTL, 11, 0 ); + + /* see if a signal did it */ + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + write_lock_irqsave(&pB->read_fifo_spinlock, flags); + cnow = pCh->icount; /* atomic copy */ + write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; /* no change => rc */ + break; + } + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + rc = 0; + break; + } + cprev = cnow; + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->delta_msr_wait, &wait); + + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3, + CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + if ( ! (pCh->flags & ASYNC_CHECK_CD)) { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP); + } + serviceOutgoingFifo( pCh->pMyBord ); + return rc; + break; + + /* + * The rest are not supported by this driver. By returning -ENOIOCTLCMD they + * will be passed to the line discipline for it to handle. + */ + case TIOCSERCONFIG: + case TIOCSERGWILD: + case TIOCSERGETLSR: + case TIOCSERSWILD: + case TIOCSERGSTRUCT: + case TIOCSERGETMULTI: + case TIOCSERSETMULTI: + + default: + ip2trace (CHANN, ITRC_IOCTL, 12, 0 ); + + rc = -ENOIOCTLCMD; + break; + } + + ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 ); + + return rc; +} + +static int ip2_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + i2eBordStrPtr pB; + struct async_icount cnow; /* kernel counter temp */ + unsigned long flags; + + if ( pCh == NULL ) + return -ENODEV; + + pB = pCh->pMyBord; + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for RI where + * only 0->1 is counted. The controller is quite capable of counting + * both, but this done to preserve compatibility with the standard + * serial driver. + */ + + write_lock_irqsave(&pB->read_fifo_spinlock, flags); + cnow = pCh->icount; + write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + return 0; +} + +/******************************************************************************/ +/* Function: GetSerialInfo() */ +/* Parameters: Pointer to channel structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This is to support the setserial command, and requires processing of the */ +/* standard Linux serial structure. */ +/******************************************************************************/ +static int +get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo ) +{ + struct serial_struct tmp; + + memset ( &tmp, 0, sizeof(tmp) ); + tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16]; + if (BID_HAS_654(tmp.type)) { + tmp.type = PORT_16650; + } else { + tmp.type = PORT_CIRRUS; + } + tmp.line = pCh->port_index; + tmp.port = pCh->pMyBord->i2eBase; + tmp.irq = ip2config.irq[pCh->port_index/64]; + tmp.flags = pCh->flags; + tmp.baud_base = pCh->BaudBase; + tmp.close_delay = pCh->ClosingDelay; + tmp.closing_wait = pCh->ClosingWaitTime; + tmp.custom_divisor = pCh->BaudDivisor; + return copy_to_user(retinfo,&tmp,sizeof(*retinfo)); +} + +/******************************************************************************/ +/* Function: SetSerialInfo() */ +/* Parameters: Pointer to channel structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function provides support for setserial, which uses the TIOCSSERIAL */ +/* ioctl. Not all setserial parameters are relevant. If the user attempts to */ +/* change the IRQ, address or type of the port the ioctl fails. */ +/******************************************************************************/ +static int +set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info ) +{ + struct serial_struct ns; + int old_flags, old_baud_divisor; + + if (copy_from_user(&ns, new_info, sizeof (ns))) + return -EFAULT; + + /* + * We don't allow setserial to change IRQ, board address, type or baud + * base. Also line nunber as such is meaningless but we use it for our + * array index so it is fixed also. + */ + if ( (ns.irq != ip2config.irq[pCh->port_index]) + || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase))) + || (ns.baud_base != pCh->BaudBase) + || (ns.line != pCh->port_index) ) { + return -EINVAL; + } + + old_flags = pCh->flags; + old_baud_divisor = pCh->BaudDivisor; + + if ( !capable(CAP_SYS_ADMIN) ) { + if ( ( ns.close_delay != pCh->ClosingDelay ) || + ( (ns.flags & ~ASYNC_USR_MASK) != + (pCh->flags & ~ASYNC_USR_MASK) ) ) { + return -EPERM; + } + + pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) | + (ns.flags & ASYNC_USR_MASK); + pCh->BaudDivisor = ns.custom_divisor; + } else { + pCh->flags = (pCh->flags & ~ASYNC_FLAGS) | + (ns.flags & ASYNC_FLAGS); + pCh->BaudDivisor = ns.custom_divisor; + pCh->ClosingDelay = ns.close_delay * HZ/100; + pCh->ClosingWaitTime = ns.closing_wait * HZ/100; + } + + if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) ) + || (old_baud_divisor != pCh->BaudDivisor) ) { + // Invalidate speed and reset parameters + set_params( pCh, NULL ); + } + + return 0; +} + +/******************************************************************************/ +/* Function: ip2_set_termios() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_set_termios( PTTY tty, struct ktermios *old_termios ) +{ + i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data; + +#ifdef IP2DEBUG_IOCTL + printk (KERN_DEBUG "IP2: set termios %p\n", old_termios ); +#endif + + set_params( pCh, old_termios ); +} + +/******************************************************************************/ +/* Function: ip2_set_line_discipline() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: Does nothing */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_set_line_discipline ( PTTY tty ) +{ +#ifdef IP2DEBUG_IOCTL + printk (KERN_DEBUG "IP2: set line discipline\n" ); +#endif + + ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 ); + +} + +/******************************************************************************/ +/* Function: SetLine Characteristics() */ +/* Parameters: Pointer to channel structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This routine is called to update the channel structure with the new line */ +/* characteristics, and send the appropriate commands to the board when they */ +/* change. */ +/******************************************************************************/ +static void +set_params( i2ChanStrPtr pCh, struct ktermios *o_tios ) +{ + tcflag_t cflag, iflag, lflag; + char stop_char, start_char; + struct ktermios dummy; + + lflag = pCh->pTTY->termios->c_lflag; + cflag = pCh->pTTY->termios->c_cflag; + iflag = pCh->pTTY->termios->c_iflag; + + if (o_tios == NULL) { + dummy.c_lflag = ~lflag; + dummy.c_cflag = ~cflag; + dummy.c_iflag = ~iflag; + o_tios = &dummy; + } + + { + switch ( cflag & CBAUD ) { + case B0: + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag); + goto service_it; + break; + case B38400: + /* + * This is the speed that is overloaded with all the other high + * speeds, depending upon the flag settings. + */ + if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) { + pCh->speed = CBR_57600; + } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) { + pCh->speed = CBR_115200; + } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) { + pCh->speed = CBR_C1; + } else { + pCh->speed = CBR_38400; + } + break; + case B50: pCh->speed = CBR_50; break; + case B75: pCh->speed = CBR_75; break; + case B110: pCh->speed = CBR_110; break; + case B134: pCh->speed = CBR_134; break; + case B150: pCh->speed = CBR_150; break; + case B200: pCh->speed = CBR_200; break; + case B300: pCh->speed = CBR_300; break; + case B600: pCh->speed = CBR_600; break; + case B1200: pCh->speed = CBR_1200; break; + case B1800: pCh->speed = CBR_1800; break; + case B2400: pCh->speed = CBR_2400; break; + case B4800: pCh->speed = CBR_4800; break; + case B9600: pCh->speed = CBR_9600; break; + case B19200: pCh->speed = CBR_19200; break; + case B57600: pCh->speed = CBR_57600; break; + case B115200: pCh->speed = CBR_115200; break; + case B153600: pCh->speed = CBR_153600; break; + case B230400: pCh->speed = CBR_230400; break; + case B307200: pCh->speed = CBR_307200; break; + case B460800: pCh->speed = CBR_460800; break; + case B921600: pCh->speed = CBR_921600; break; + default: pCh->speed = CBR_9600; break; + } + if ( pCh->speed == CBR_C1 ) { + // Process the custom speed parameters. + int bps = pCh->BaudBase / pCh->BaudDivisor; + if ( bps == 921600 ) { + pCh->speed = CBR_921600; + } else { + bps = bps/10; + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) ); + } + } + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed)); + + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + } + if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag)) + { + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, + CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1)); + } + if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag)) + { + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, + CMD_SETPAR( + (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP) + ) + ); + } + /* byte size and parity */ + if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag)) + { + int datasize; + switch ( cflag & CSIZE ) { + case CS5: datasize = CSZ_5; break; + case CS6: datasize = CSZ_6; break; + case CS7: datasize = CSZ_7; break; + case CS8: datasize = CSZ_8; break; + default: datasize = CSZ_5; break; /* as per serial.c */ + } + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) ); + } + /* Process CTS flow control flag setting */ + if ( (cflag & CRTSCTS) ) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, + 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB); + } else { + i2QueueCommands(PTYPE_INLINE, pCh, 100, + 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + } + // + // Process XON/XOFF flow control flags settings + // + stop_char = STOP_CHAR(pCh->pTTY); + start_char = START_CHAR(pCh->pTTY); + + //////////// can't be \000 + if (stop_char == __DISABLED_CHAR ) + { + stop_char = ~__DISABLED_CHAR; + } + if (start_char == __DISABLED_CHAR ) + { + start_char = ~__DISABLED_CHAR; + } + ///////////////////////////////// + + if ( o_tios->c_cc[VSTART] != start_char ) + { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char)); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char)); + } + if ( o_tios->c_cc[VSTOP] != stop_char ) + { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char)); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char)); + } + if (stop_char == __DISABLED_CHAR ) + { + stop_char = ~__DISABLED_CHAR; //TEST123 + goto no_xoff; + } + if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF))) + { + if ( iflag & IXOFF ) { // Enable XOFF output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON)); + } else { // Disable XOFF output flow control +no_xoff: + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE)); + } + } + if (start_char == __DISABLED_CHAR ) + { + goto no_xon; + } + if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY))) + { + if ( iflag & IXON ) { + if ( iflag & IXANY ) { // Enable XON/XANY output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY)); + } else { // Enable XON output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON)); + } + } else { // Disable XON output flow control +no_xon: + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE)); + } + } + if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) ) + { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0))); + } + if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) ) + { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB)); + } + + if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) + ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) ) + { + char brkrpt = 0; + char parrpt = 0; + + if ( iflag & IGNBRK ) { /* Ignore breaks altogether */ + /* Ignore breaks altogether */ + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP); + } else { + if ( iflag & BRKINT ) { + if ( iflag & PARMRK ) { + brkrpt = 0x0a; // exception an inline triple + } else { + brkrpt = 0x1a; // exception and NULL + } + brkrpt |= 0x04; // flush input + } else { + if ( iflag & PARMRK ) { + brkrpt = 0x0b; //POSIX triple \0377 \0 \0 + } else { + brkrpt = 0x01; // Null only + } + } + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt)); + } + + if (iflag & IGNPAR) { + parrpt = 0x20; + /* would be 2 for not cirrus bug */ + /* would be 0x20 cept for cirrus bug */ + } else { + if ( iflag & PARMRK ) { + /* + * Replace error characters with 3-byte sequence (\0377,\0,char) + */ + parrpt = 0x04 ; + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0)); + } else { + parrpt = 0x03; + } + } + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt)); + } + if (cflag & CLOCAL) { + // Status reporting fails for DCD if this is off + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP); + pCh->flags &= ~ASYNC_CHECK_CD; + } else { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP); + pCh->flags |= ASYNC_CHECK_CD; + } + +service_it: + i2DrainOutput( pCh, 100 ); +} + +/******************************************************************************/ +/* IPL Device Section */ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_ipl_read() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Pointer to data */ +/* Number of bytes to read */ +/* Returns: Success or failure */ +/* */ +/* Description: Ugly */ +/* */ +/* */ +/******************************************************************************/ + +static +ssize_t +ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off ) +{ + unsigned int minor = iminor(pFile->f_path.dentry->d_inode); + int rc = 0; + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count ); +#endif + + switch( minor ) { + case 0: // IPL device + rc = -EINVAL; + break; + case 1: // Status dump + rc = -EINVAL; + break; + case 2: // Ping device + rc = -EINVAL; + break; + case 3: // Trace device + rc = DumpTraceBuffer ( pData, count ); + break; + case 4: // Trace device + rc = DumpFifoBuffer ( pData, count ); + break; + default: + rc = -ENODEV; + break; + } + return rc; +} + +static int +DumpFifoBuffer ( char __user *pData, int count ) +{ +#ifdef DEBUG_FIFO + int rc; + rc = copy_to_user(pData, DBGBuf, count); + + printk(KERN_DEBUG "Last index %d\n", I ); + + return count; +#endif /* DEBUG_FIFO */ + return 0; +} + +static int +DumpTraceBuffer ( char __user *pData, int count ) +{ +#ifdef IP2DEBUG_TRACE + int rc; + int dumpcount; + int chunk; + int *pIndex = (int __user *)pData; + + if ( count < (sizeof(int) * 6) ) { + return -EIO; + } + rc = put_user(tracewrap, pIndex ); + rc = put_user(TRACEMAX, ++pIndex ); + rc = put_user(tracestrip, ++pIndex ); + rc = put_user(tracestuff, ++pIndex ); + pData += sizeof(int) * 6; + count -= sizeof(int) * 6; + + dumpcount = tracestuff - tracestrip; + if ( dumpcount < 0 ) { + dumpcount += TRACEMAX; + } + if ( dumpcount > count ) { + dumpcount = count; + } + chunk = TRACEMAX - tracestrip; + if ( dumpcount > chunk ) { + rc = copy_to_user(pData, &tracebuf[tracestrip], + chunk * sizeof(tracebuf[0]) ); + pData += chunk * sizeof(tracebuf[0]); + tracestrip = 0; + chunk = dumpcount - chunk; + } else { + chunk = dumpcount; + } + rc = copy_to_user(pData, &tracebuf[tracestrip], + chunk * sizeof(tracebuf[0]) ); + tracestrip += chunk; + tracewrap = 0; + + rc = put_user(tracestrip, ++pIndex ); + rc = put_user(tracestuff, ++pIndex ); + + return dumpcount; +#else + return 0; +#endif +} + +/******************************************************************************/ +/* Function: ip2_ipl_write() */ +/* Parameters: */ +/* Pointer to file structure */ +/* Pointer to data */ +/* Number of bytes to write */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static ssize_t +ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off) +{ +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count ); +#endif + return 0; +} + +/******************************************************************************/ +/* Function: ip2_ipl_ioctl() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Command */ +/* Argument */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static long +ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg ) +{ + unsigned int iplminor = iminor(pFile->f_path.dentry->d_inode); + int rc = 0; + void __user *argp = (void __user *)arg; + ULONG __user *pIndex = argp; + i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4]; + i2ChanStrPtr pCh; + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg ); +#endif + + mutex_lock(&ip2_mutex); + + switch ( iplminor ) { + case 0: // IPL device + rc = -EINVAL; + break; + case 1: // Status dump + case 5: + case 9: + case 13: + switch ( cmd ) { + case 64: /* Driver - ip2stat */ + rc = put_user(-1, pIndex++ ); + rc = put_user(irq_counter, pIndex++ ); + rc = put_user(bh_counter, pIndex++ ); + break; + + case 65: /* Board - ip2stat */ + if ( pB ) { + rc = copy_to_user(argp, pB, sizeof(i2eBordStr)); + rc = put_user(inb(pB->i2eStatus), + (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) ); + } else { + rc = -ENODEV; + } + break; + + default: + if (cmd < IP2_MAX_PORTS) { + pCh = DevTable[cmd]; + if ( pCh ) + { + rc = copy_to_user(argp, pCh, sizeof(i2ChanStr)); + if (rc) + rc = -EFAULT; + } else { + rc = -ENODEV; + } + } else { + rc = -EINVAL; + } + } + break; + + case 2: // Ping device + rc = -EINVAL; + break; + case 3: // Trace device + /* + * akpm: This used to write a whole bunch of function addresses + * to userspace, which generated lots of put_user() warnings. + * I killed it all. Just return "success" and don't do + * anything. + */ + if (cmd == 1) + rc = 0; + else + rc = -EINVAL; + break; + + default: + rc = -ENODEV; + break; + } + mutex_unlock(&ip2_mutex); + return rc; +} + +/******************************************************************************/ +/* Function: ip2_ipl_open() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_ipl_open( struct inode *pInode, struct file *pFile ) +{ + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: open\n" ); +#endif + return 0; +} + +static int +proc_ip2mem_show(struct seq_file *m, void *v) +{ + i2eBordStrPtr pB; + i2ChanStrPtr pCh; + PTTY tty; + int i; + +#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n" +#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n" +#define FMTLIN3 " 0x%04x 0x%04x rc flow\n" + + seq_printf(m,"\n"); + + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + pB = i2BoardPtrTable[i]; + if ( pB ) { + seq_printf(m,"board %d:\n",i); + seq_printf(m,"\tFifo rem: %d mty: %x outM %x\n", + pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting); + } + } + + seq_printf(m,"#: tty flags, port flags, cflags, iflags\n"); + for (i=0; i < IP2_MAX_PORTS; i++) { + pCh = DevTable[i]; + if (pCh) { + tty = pCh->pTTY; + if (tty && tty->count) { + seq_printf(m,FMTLINE,i,(int)tty->flags,pCh->flags, + tty->termios->c_cflag,tty->termios->c_iflag); + + seq_printf(m,FMTLIN2, + pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds); + seq_printf(m,FMTLIN3,pCh->infl.asof,pCh->infl.room); + } + } + } + return 0; +} + +static int proc_ip2mem_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_ip2mem_show, NULL); +} + +static const struct file_operations ip2mem_proc_fops = { + .owner = THIS_MODULE, + .open = proc_ip2mem_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * This is the handler for /proc/tty/driver/ip2 + * + * This stretch of code has been largely plagerized from at least three + * different sources including ip2mkdev.c and a couple of other drivers. + * The bugs are all mine. :-) =mhw= + */ +static int ip2_proc_show(struct seq_file *m, void *v) +{ + int i, j, box; + int boxes = 0; + int ports = 0; + int tports = 0; + i2eBordStrPtr pB; + char *sep; + + seq_printf(m, "ip2info: 1.0 driver: %s\n", pcVersion); + seq_printf(m, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", + IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR, + IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX); + + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + /* This need to be reset for a board by board count... */ + boxes = 0; + pB = i2BoardPtrTable[i]; + if( pB ) { + switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) + { + case POR_ID_FIIEX: + seq_printf(m, "Board %d: EX ports=", i); + sep = ""; + for( box = 0; box < ABS_MAX_BOXES; ++box ) + { + ports = 0; + + if( pB->i2eChannelMap[box] != 0 ) ++boxes; + for( j = 0; j < ABS_BIGGEST_BOX; ++j ) + { + if( pB->i2eChannelMap[box] & 1<< j ) { + ++ports; + } + } + seq_printf(m, "%s%d", sep, ports); + sep = ","; + tports += ports; + } + seq_printf(m, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8); + break; + + case POR_ID_II_4: + seq_printf(m, "Board %d: ISA-4 ports=4 boxes=1", i); + tports = ports = 4; + break; + + case POR_ID_II_8: + seq_printf(m, "Board %d: ISA-8-std ports=8 boxes=1", i); + tports = ports = 8; + break; + + case POR_ID_II_8R: + seq_printf(m, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i); + tports = ports = 8; + break; + + default: + seq_printf(m, "Board %d: unknown", i); + /* Don't try and probe for minor numbers */ + tports = ports = 0; + } + + } else { + /* Don't try and probe for minor numbers */ + seq_printf(m, "Board %d: vacant", i); + tports = ports = 0; + } + + if( tports ) { + seq_puts(m, " minors="); + sep = ""; + for ( box = 0; box < ABS_MAX_BOXES; ++box ) + { + for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) + { + if ( pB->i2eChannelMap[box] & (1 << j) ) + { + seq_printf(m, "%s%d", sep, + j + ABS_BIGGEST_BOX * + (box+i*ABS_MAX_BOXES)); + sep = ","; + } + } + } + } + seq_putc(m, '\n'); + } + return 0; + } + +static int ip2_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ip2_proc_show, NULL); +} + +static const struct file_operations ip2_proc_fops = { + .owner = THIS_MODULE, + .open = ip2_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/******************************************************************************/ +/* Function: ip2trace() */ +/* Parameters: Value to add to trace buffer */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +#ifdef IP2DEBUG_TRACE +void +ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...) +{ + long flags; + unsigned long *pCode = &codes; + union ip2breadcrumb bc; + i2ChanStrPtr pCh; + + + tracebuf[tracestuff++] = jiffies; + if ( tracestuff == TRACEMAX ) { + tracestuff = 0; + } + if ( tracestuff == tracestrip ) { + if ( ++tracestrip == TRACEMAX ) { + tracestrip = 0; + } + ++tracewrap; + } + + bc.hdr.port = 0xff & pn; + bc.hdr.cat = cat; + bc.hdr.codes = (unsigned char)( codes & 0xff ); + bc.hdr.label = label; + tracebuf[tracestuff++] = bc.value; + + for (;;) { + if ( tracestuff == TRACEMAX ) { + tracestuff = 0; + } + if ( tracestuff == tracestrip ) { + if ( ++tracestrip == TRACEMAX ) { + tracestrip = 0; + } + ++tracewrap; + } + + if ( !codes-- ) + break; + + tracebuf[tracestuff++] = *++pCode; + } +} +#endif + + +MODULE_LICENSE("GPL"); + +static struct pci_device_id ip2main_pci_tbl[] __devinitdata __used = { + { PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl); + +MODULE_FIRMWARE("intelliport2.bin"); diff --git a/drivers/staging/tty/ip2/ip2trace.h b/drivers/staging/tty/ip2/ip2trace.h new file mode 100644 index 000000000000..da20435dc8a6 --- /dev/null +++ b/drivers/staging/tty/ip2/ip2trace.h @@ -0,0 +1,42 @@ + +// +union ip2breadcrumb +{ + struct { + unsigned char port, cat, codes, label; + } __attribute__ ((packed)) hdr; + unsigned long value; +}; + +#define ITRC_NO_PORT 0xFF +#define CHANN (pCh->port_index) + +#define ITRC_ERROR '!' +#define ITRC_INIT 'A' +#define ITRC_OPEN 'B' +#define ITRC_CLOSE 'C' +#define ITRC_DRAIN 'D' +#define ITRC_IOCTL 'E' +#define ITRC_FLUSH 'F' +#define ITRC_STATUS 'G' +#define ITRC_HANGUP 'H' +#define ITRC_INTR 'I' +#define ITRC_SFLOW 'J' +#define ITRC_SBCMD 'K' +#define ITRC_SICMD 'L' +#define ITRC_MODEM 'M' +#define ITRC_INPUT 'N' +#define ITRC_OUTPUT 'O' +#define ITRC_PUTC 'P' +#define ITRC_QUEUE 'Q' +#define ITRC_STFLW 'R' +#define ITRC_SFIFO 'S' +#define ITRC_VERIFY 'V' +#define ITRC_WRITE 'W' + +#define ITRC_ENTER 0x00 +#define ITRC_RETURN 0xFF + +#define ITRC_QUEUE_ROOM 2 +#define ITRC_QUEUE_CMD 6 + diff --git a/drivers/staging/tty/ip2/ip2types.h b/drivers/staging/tty/ip2/ip2types.h new file mode 100644 index 000000000000..9d67b260b2f6 --- /dev/null +++ b/drivers/staging/tty/ip2/ip2types.h @@ -0,0 +1,57 @@ +/******************************************************************************* +* +* (c) 1998 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Driver constants and type definitions. +* +* NOTES: +* +*******************************************************************************/ +#ifndef IP2TYPES_H +#define IP2TYPES_H + +//************* +//* Constants * +//************* + +// Define some limits for this driver. Ports per board is a hardware limitation +// that will not change. Current hardware limits this to 64 ports per board. +// Boards per driver is a self-imposed limit. +// +#define IP2_MAX_BOARDS 4 +#define IP2_PORTS_PER_BOARD ABS_MOST_PORTS +#define IP2_MAX_PORTS (IP2_MAX_BOARDS*IP2_PORTS_PER_BOARD) + +#define ISA 0 +#define PCI 1 +#define EISA 2 + +//******************** +//* Type Definitions * +//******************** + +typedef struct tty_struct * PTTY; +typedef wait_queue_head_t PWAITQ; + +typedef unsigned char UCHAR; +typedef unsigned int UINT; +typedef unsigned short USHORT; +typedef unsigned long ULONG; + +typedef struct +{ + short irq[IP2_MAX_BOARDS]; + unsigned short addr[IP2_MAX_BOARDS]; + int type[IP2_MAX_BOARDS]; +#ifdef CONFIG_PCI + struct pci_dev *pci_dev[IP2_MAX_BOARDS]; +#endif +} ip2config_t; + +#endif diff --git a/drivers/staging/tty/istallion.c b/drivers/staging/tty/istallion.c new file mode 100644 index 000000000000..0b266272cccd --- /dev/null +++ b/drivers/staging/tty/istallion.c @@ -0,0 +1,4507 @@ +/*****************************************************************************/ + +/* + * istallion.c -- stallion intelligent multiport serial driver. + * + * Copyright (C) 1996-1999 Stallion Technologies + * Copyright (C) 1994-1996 Greg Ungerer. + * + * This code is loosely based on the Linux serial driver, written by + * Linus Torvalds, Theodore T'so and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +/*****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +/*****************************************************************************/ + +/* + * Define different board types. Not all of the following board types + * are supported by this driver. But I will use the standard "assigned" + * board numbers. Currently supported boards are abbreviated as: + * ECP = EasyConnection 8/64, ONB = ONboard, BBY = Brumby and + * STAL = Stallion. + */ +#define BRD_UNKNOWN 0 +#define BRD_STALLION 1 +#define BRD_BRUMBY4 2 +#define BRD_ONBOARD2 3 +#define BRD_ONBOARD 4 +#define BRD_ONBOARDE 7 +#define BRD_ECP 23 +#define BRD_ECPE 24 +#define BRD_ECPMC 25 +#define BRD_ECPPCI 29 + +#define BRD_BRUMBY BRD_BRUMBY4 + +/* + * Define a configuration structure to hold the board configuration. + * Need to set this up in the code (for now) with the boards that are + * to be configured into the system. This is what needs to be modified + * when adding/removing/modifying boards. Each line entry in the + * stli_brdconf[] array is a board. Each line contains io/irq/memory + * ranges for that board (as well as what type of board it is). + * Some examples: + * { BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 }, + * This line will configure an EasyConnection 8/64 at io address 2a0, + * and shared memory address of cc000. Multiple EasyConnection 8/64 + * boards can share the same shared memory address space. No interrupt + * is required for this board type. + * Another example: + * { BRD_ECPE, 0x5000, 0, 0x80000000, 0, 0 }, + * This line will configure an EasyConnection 8/64 EISA in slot 5 and + * shared memory address of 0x80000000 (2 GByte). Multiple + * EasyConnection 8/64 EISA boards can share the same shared memory + * address space. No interrupt is required for this board type. + * Another example: + * { BRD_ONBOARD, 0x240, 0, 0xd0000, 0, 0 }, + * This line will configure an ONboard (ISA type) at io address 240, + * and shared memory address of d0000. Multiple ONboards can share + * the same shared memory address space. No interrupt required. + * Another example: + * { BRD_BRUMBY4, 0x360, 0, 0xc8000, 0, 0 }, + * This line will configure a Brumby board (any number of ports!) at + * io address 360 and shared memory address of c8000. All Brumby boards + * configured into a system must have their own separate io and memory + * addresses. No interrupt is required. + * Another example: + * { BRD_STALLION, 0x330, 0, 0xd0000, 0, 0 }, + * This line will configure an original Stallion board at io address 330 + * and shared memory address d0000 (this would only be valid for a "V4.0" + * or Rev.O Stallion board). All Stallion boards configured into the + * system must have their own separate io and memory addresses. No + * interrupt is required. + */ + +struct stlconf { + int brdtype; + int ioaddr1; + int ioaddr2; + unsigned long memaddr; + int irq; + int irqtype; +}; + +static unsigned int stli_nrbrds; + +/* stli_lock must NOT be taken holding brd_lock */ +static spinlock_t stli_lock; /* TTY logic lock */ +static spinlock_t brd_lock; /* Board logic lock */ + +/* + * There is some experimental EISA board detection code in this driver. + * By default it is disabled, but for those that want to try it out, + * then set the define below to be 1. + */ +#define STLI_EISAPROBE 0 + +/*****************************************************************************/ + +/* + * Define some important driver characteristics. Device major numbers + * allocated as per Linux Device Registry. + */ +#ifndef STL_SIOMEMMAJOR +#define STL_SIOMEMMAJOR 28 +#endif +#ifndef STL_SERIALMAJOR +#define STL_SERIALMAJOR 24 +#endif +#ifndef STL_CALLOUTMAJOR +#define STL_CALLOUTMAJOR 25 +#endif + +/*****************************************************************************/ + +/* + * Define our local driver identity first. Set up stuff to deal with + * all the local structures required by a serial tty driver. + */ +static char *stli_drvtitle = "Stallion Intelligent Multiport Serial Driver"; +static char *stli_drvname = "istallion"; +static char *stli_drvversion = "5.6.0"; +static char *stli_serialname = "ttyE"; + +static struct tty_driver *stli_serial; +static const struct tty_port_operations stli_port_ops; + +#define STLI_TXBUFSIZE 4096 + +/* + * Use a fast local buffer for cooked characters. Typically a whole + * bunch of cooked characters come in for a port, 1 at a time. So we + * save those up into a local buffer, then write out the whole lot + * with a large memcpy. Just use 1 buffer for all ports, since its + * use it is only need for short periods of time by each port. + */ +static char *stli_txcookbuf; +static int stli_txcooksize; +static int stli_txcookrealsize; +static struct tty_struct *stli_txcooktty; + +/* + * Define a local default termios struct. All ports will be created + * with this termios initially. Basically all it defines is a raw port + * at 9600 baud, 8 data bits, no parity, 1 stop bit. + */ +static struct ktermios stli_deftermios = { + .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL), + .c_cc = INIT_C_CC, + .c_ispeed = 9600, + .c_ospeed = 9600, +}; + +/* + * Define global stats structures. Not used often, and can be + * re-used for each stats call. + */ +static comstats_t stli_comstats; +static combrd_t stli_brdstats; +static struct asystats stli_cdkstats; + +/*****************************************************************************/ + +static DEFINE_MUTEX(stli_brdslock); +static struct stlibrd *stli_brds[STL_MAXBRDS]; + +static int stli_shared; + +/* + * Per board state flags. Used with the state field of the board struct. + * Not really much here... All we need to do is keep track of whether + * the board has been detected, and whether it is actually running a slave + * or not. + */ +#define BST_FOUND 0 +#define BST_STARTED 1 +#define BST_PROBED 2 + +/* + * Define the set of port state flags. These are marked for internal + * state purposes only, usually to do with the state of communications + * with the slave. Most of them need to be updated atomically, so always + * use the bit setting operations (unless protected by cli/sti). + */ +#define ST_OPENING 2 +#define ST_CLOSING 3 +#define ST_CMDING 4 +#define ST_TXBUSY 5 +#define ST_RXING 6 +#define ST_DOFLUSHRX 7 +#define ST_DOFLUSHTX 8 +#define ST_DOSIGS 9 +#define ST_RXSTOP 10 +#define ST_GETSIGS 11 + +/* + * Define an array of board names as printable strings. Handy for + * referencing boards when printing trace and stuff. + */ +static char *stli_brdnames[] = { + "Unknown", + "Stallion", + "Brumby", + "ONboard-MC", + "ONboard", + "Brumby", + "Brumby", + "ONboard-EI", + NULL, + "ONboard", + "ONboard-MC", + "ONboard-MC", + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + "EasyIO", + "EC8/32-AT", + "EC8/32-MC", + "EC8/64-AT", + "EC8/64-EI", + "EC8/64-MC", + "EC8/32-PCI", + "EC8/64-PCI", + "EasyIO-PCI", + "EC/RA-PCI", +}; + +/*****************************************************************************/ + +/* + * Define some string labels for arguments passed from the module + * load line. These allow for easy board definitions, and easy + * modification of the io, memory and irq resoucres. + */ + +static char *board0[8]; +static char *board1[8]; +static char *board2[8]; +static char *board3[8]; + +static char **stli_brdsp[] = { + (char **) &board0, + (char **) &board1, + (char **) &board2, + (char **) &board3 +}; + +/* + * Define a set of common board names, and types. This is used to + * parse any module arguments. + */ + +static struct stlibrdtype { + char *name; + int type; +} stli_brdstr[] = { + { "stallion", BRD_STALLION }, + { "1", BRD_STALLION }, + { "brumby", BRD_BRUMBY }, + { "brumby4", BRD_BRUMBY }, + { "brumby/4", BRD_BRUMBY }, + { "brumby-4", BRD_BRUMBY }, + { "brumby8", BRD_BRUMBY }, + { "brumby/8", BRD_BRUMBY }, + { "brumby-8", BRD_BRUMBY }, + { "brumby16", BRD_BRUMBY }, + { "brumby/16", BRD_BRUMBY }, + { "brumby-16", BRD_BRUMBY }, + { "2", BRD_BRUMBY }, + { "onboard2", BRD_ONBOARD2 }, + { "onboard-2", BRD_ONBOARD2 }, + { "onboard/2", BRD_ONBOARD2 }, + { "onboard-mc", BRD_ONBOARD2 }, + { "onboard/mc", BRD_ONBOARD2 }, + { "onboard-mca", BRD_ONBOARD2 }, + { "onboard/mca", BRD_ONBOARD2 }, + { "3", BRD_ONBOARD2 }, + { "onboard", BRD_ONBOARD }, + { "onboardat", BRD_ONBOARD }, + { "4", BRD_ONBOARD }, + { "onboarde", BRD_ONBOARDE }, + { "onboard-e", BRD_ONBOARDE }, + { "onboard/e", BRD_ONBOARDE }, + { "onboard-ei", BRD_ONBOARDE }, + { "onboard/ei", BRD_ONBOARDE }, + { "7", BRD_ONBOARDE }, + { "ecp", BRD_ECP }, + { "ecpat", BRD_ECP }, + { "ec8/64", BRD_ECP }, + { "ec8/64-at", BRD_ECP }, + { "ec8/64-isa", BRD_ECP }, + { "23", BRD_ECP }, + { "ecpe", BRD_ECPE }, + { "ecpei", BRD_ECPE }, + { "ec8/64-e", BRD_ECPE }, + { "ec8/64-ei", BRD_ECPE }, + { "24", BRD_ECPE }, + { "ecpmc", BRD_ECPMC }, + { "ec8/64-mc", BRD_ECPMC }, + { "ec8/64-mca", BRD_ECPMC }, + { "25", BRD_ECPMC }, + { "ecppci", BRD_ECPPCI }, + { "ec/ra", BRD_ECPPCI }, + { "ec/ra-pc", BRD_ECPPCI }, + { "ec/ra-pci", BRD_ECPPCI }, + { "29", BRD_ECPPCI }, +}; + +/* + * Define the module agruments. + */ +MODULE_AUTHOR("Greg Ungerer"); +MODULE_DESCRIPTION("Stallion Intelligent Multiport Serial Driver"); +MODULE_LICENSE("GPL"); + + +module_param_array(board0, charp, NULL, 0); +MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,memaddr]"); +module_param_array(board1, charp, NULL, 0); +MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,memaddr]"); +module_param_array(board2, charp, NULL, 0); +MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]"); +module_param_array(board3, charp, NULL, 0); +MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]"); + +#if STLI_EISAPROBE != 0 +/* + * Set up a default memory address table for EISA board probing. + * The default addresses are all bellow 1Mbyte, which has to be the + * case anyway. They should be safe, since we only read values from + * them, and interrupts are disabled while we do it. If the higher + * memory support is compiled in then we also try probing around + * the 1Gb, 2Gb and 3Gb areas as well... + */ +static unsigned long stli_eisamemprobeaddrs[] = { + 0xc0000, 0xd0000, 0xe0000, 0xf0000, + 0x80000000, 0x80010000, 0x80020000, 0x80030000, + 0x40000000, 0x40010000, 0x40020000, 0x40030000, + 0xc0000000, 0xc0010000, 0xc0020000, 0xc0030000, + 0xff000000, 0xff010000, 0xff020000, 0xff030000, +}; + +static int stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs); +#endif + +/* + * Define the Stallion PCI vendor and device IDs. + */ +#ifndef PCI_DEVICE_ID_ECRA +#define PCI_DEVICE_ID_ECRA 0x0004 +#endif + +static struct pci_device_id istallion_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA), }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, istallion_pci_tbl); + +static struct pci_driver stli_pcidriver; + +/*****************************************************************************/ + +/* + * Hardware configuration info for ECP boards. These defines apply + * to the directly accessible io ports of the ECP. There is a set of + * defines for each ECP board type, ISA, EISA, MCA and PCI. + */ +#define ECP_IOSIZE 4 + +#define ECP_MEMSIZE (128 * 1024) +#define ECP_PCIMEMSIZE (256 * 1024) + +#define ECP_ATPAGESIZE (4 * 1024) +#define ECP_MCPAGESIZE (4 * 1024) +#define ECP_EIPAGESIZE (64 * 1024) +#define ECP_PCIPAGESIZE (64 * 1024) + +#define STL_EISAID 0x8c4e + +/* + * Important defines for the ISA class of ECP board. + */ +#define ECP_ATIREG 0 +#define ECP_ATCONFR 1 +#define ECP_ATMEMAR 2 +#define ECP_ATMEMPR 3 +#define ECP_ATSTOP 0x1 +#define ECP_ATINTENAB 0x10 +#define ECP_ATENABLE 0x20 +#define ECP_ATDISABLE 0x00 +#define ECP_ATADDRMASK 0x3f000 +#define ECP_ATADDRSHFT 12 + +/* + * Important defines for the EISA class of ECP board. + */ +#define ECP_EIIREG 0 +#define ECP_EIMEMARL 1 +#define ECP_EICONFR 2 +#define ECP_EIMEMARH 3 +#define ECP_EIENABLE 0x1 +#define ECP_EIDISABLE 0x0 +#define ECP_EISTOP 0x4 +#define ECP_EIEDGE 0x00 +#define ECP_EILEVEL 0x80 +#define ECP_EIADDRMASKL 0x00ff0000 +#define ECP_EIADDRSHFTL 16 +#define ECP_EIADDRMASKH 0xff000000 +#define ECP_EIADDRSHFTH 24 +#define ECP_EIBRDENAB 0xc84 + +#define ECP_EISAID 0x4 + +/* + * Important defines for the Micro-channel class of ECP board. + * (It has a lot in common with the ISA boards.) + */ +#define ECP_MCIREG 0 +#define ECP_MCCONFR 1 +#define ECP_MCSTOP 0x20 +#define ECP_MCENABLE 0x80 +#define ECP_MCDISABLE 0x00 + +/* + * Important defines for the PCI class of ECP board. + * (It has a lot in common with the other ECP boards.) + */ +#define ECP_PCIIREG 0 +#define ECP_PCICONFR 1 +#define ECP_PCISTOP 0x01 + +/* + * Hardware configuration info for ONboard and Brumby boards. These + * defines apply to the directly accessible io ports of these boards. + */ +#define ONB_IOSIZE 16 +#define ONB_MEMSIZE (64 * 1024) +#define ONB_ATPAGESIZE (64 * 1024) +#define ONB_MCPAGESIZE (64 * 1024) +#define ONB_EIMEMSIZE (128 * 1024) +#define ONB_EIPAGESIZE (64 * 1024) + +/* + * Important defines for the ISA class of ONboard board. + */ +#define ONB_ATIREG 0 +#define ONB_ATMEMAR 1 +#define ONB_ATCONFR 2 +#define ONB_ATSTOP 0x4 +#define ONB_ATENABLE 0x01 +#define ONB_ATDISABLE 0x00 +#define ONB_ATADDRMASK 0xff0000 +#define ONB_ATADDRSHFT 16 + +#define ONB_MEMENABLO 0 +#define ONB_MEMENABHI 0x02 + +/* + * Important defines for the EISA class of ONboard board. + */ +#define ONB_EIIREG 0 +#define ONB_EIMEMARL 1 +#define ONB_EICONFR 2 +#define ONB_EIMEMARH 3 +#define ONB_EIENABLE 0x1 +#define ONB_EIDISABLE 0x0 +#define ONB_EISTOP 0x4 +#define ONB_EIEDGE 0x00 +#define ONB_EILEVEL 0x80 +#define ONB_EIADDRMASKL 0x00ff0000 +#define ONB_EIADDRSHFTL 16 +#define ONB_EIADDRMASKH 0xff000000 +#define ONB_EIADDRSHFTH 24 +#define ONB_EIBRDENAB 0xc84 + +#define ONB_EISAID 0x1 + +/* + * Important defines for the Brumby boards. They are pretty simple, + * there is not much that is programmably configurable. + */ +#define BBY_IOSIZE 16 +#define BBY_MEMSIZE (64 * 1024) +#define BBY_PAGESIZE (16 * 1024) + +#define BBY_ATIREG 0 +#define BBY_ATCONFR 1 +#define BBY_ATSTOP 0x4 + +/* + * Important defines for the Stallion boards. They are pretty simple, + * there is not much that is programmably configurable. + */ +#define STAL_IOSIZE 16 +#define STAL_MEMSIZE (64 * 1024) +#define STAL_PAGESIZE (64 * 1024) + +/* + * Define the set of status register values for EasyConnection panels. + * The signature will return with the status value for each panel. From + * this we can determine what is attached to the board - before we have + * actually down loaded any code to it. + */ +#define ECH_PNLSTATUS 2 +#define ECH_PNL16PORT 0x20 +#define ECH_PNLIDMASK 0x07 +#define ECH_PNLXPID 0x40 +#define ECH_PNLINTRPEND 0x80 + +/* + * Define some macros to do things to the board. Even those these boards + * are somewhat related there is often significantly different ways of + * doing some operation on it (like enable, paging, reset, etc). So each + * board class has a set of functions which do the commonly required + * operations. The macros below basically just call these functions, + * generally checking for a NULL function - which means that the board + * needs nothing done to it to achieve this operation! + */ +#define EBRDINIT(brdp) \ + if (brdp->init != NULL) \ + (* brdp->init)(brdp) + +#define EBRDENABLE(brdp) \ + if (brdp->enable != NULL) \ + (* brdp->enable)(brdp); + +#define EBRDDISABLE(brdp) \ + if (brdp->disable != NULL) \ + (* brdp->disable)(brdp); + +#define EBRDINTR(brdp) \ + if (brdp->intr != NULL) \ + (* brdp->intr)(brdp); + +#define EBRDRESET(brdp) \ + if (brdp->reset != NULL) \ + (* brdp->reset)(brdp); + +#define EBRDGETMEMPTR(brdp,offset) \ + (* brdp->getmemptr)(brdp, offset, __LINE__) + +/* + * Define the maximal baud rate, and the default baud base for ports. + */ +#define STL_MAXBAUD 460800 +#define STL_BAUDBASE 115200 +#define STL_CLOSEDELAY (5 * HZ / 10) + +/*****************************************************************************/ + +/* + * Define macros to extract a brd or port number from a minor number. + */ +#define MINOR2BRD(min) (((min) & 0xc0) >> 6) +#define MINOR2PORT(min) ((min) & 0x3f) + +/*****************************************************************************/ + +/* + * Prototype all functions in this driver! + */ + +static int stli_parsebrd(struct stlconf *confp, char **argp); +static int stli_open(struct tty_struct *tty, struct file *filp); +static void stli_close(struct tty_struct *tty, struct file *filp); +static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count); +static int stli_putchar(struct tty_struct *tty, unsigned char ch); +static void stli_flushchars(struct tty_struct *tty); +static int stli_writeroom(struct tty_struct *tty); +static int stli_charsinbuffer(struct tty_struct *tty); +static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); +static void stli_settermios(struct tty_struct *tty, struct ktermios *old); +static void stli_throttle(struct tty_struct *tty); +static void stli_unthrottle(struct tty_struct *tty); +static void stli_stop(struct tty_struct *tty); +static void stli_start(struct tty_struct *tty); +static void stli_flushbuffer(struct tty_struct *tty); +static int stli_breakctl(struct tty_struct *tty, int state); +static void stli_waituntilsent(struct tty_struct *tty, int timeout); +static void stli_sendxchar(struct tty_struct *tty, char ch); +static void stli_hangup(struct tty_struct *tty); + +static int stli_brdinit(struct stlibrd *brdp); +static int stli_startbrd(struct stlibrd *brdp); +static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp); +static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp); +static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); +static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp); +static void stli_poll(unsigned long arg); +static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); +static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp); +static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); +static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); +static int stli_setport(struct tty_struct *tty); +static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); +static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); +static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); +static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp); +static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, asyport_t *pp, struct ktermios *tiosp); +static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts); +static long stli_mktiocm(unsigned long sigvalue); +static void stli_read(struct stlibrd *brdp, struct stliport *portp); +static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp); +static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp); +static int stli_getbrdstats(combrd_t __user *bp); +static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, comstats_t __user *cp); +static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp); +static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp); +static int stli_getportstruct(struct stliport __user *arg); +static int stli_getbrdstruct(struct stlibrd __user *arg); +static struct stlibrd *stli_allocbrd(void); + +static void stli_ecpinit(struct stlibrd *brdp); +static void stli_ecpenable(struct stlibrd *brdp); +static void stli_ecpdisable(struct stlibrd *brdp); +static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_ecpreset(struct stlibrd *brdp); +static void stli_ecpintr(struct stlibrd *brdp); +static void stli_ecpeiinit(struct stlibrd *brdp); +static void stli_ecpeienable(struct stlibrd *brdp); +static void stli_ecpeidisable(struct stlibrd *brdp); +static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_ecpeireset(struct stlibrd *brdp); +static void stli_ecpmcenable(struct stlibrd *brdp); +static void stli_ecpmcdisable(struct stlibrd *brdp); +static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_ecpmcreset(struct stlibrd *brdp); +static void stli_ecppciinit(struct stlibrd *brdp); +static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_ecppcireset(struct stlibrd *brdp); + +static void stli_onbinit(struct stlibrd *brdp); +static void stli_onbenable(struct stlibrd *brdp); +static void stli_onbdisable(struct stlibrd *brdp); +static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_onbreset(struct stlibrd *brdp); +static void stli_onbeinit(struct stlibrd *brdp); +static void stli_onbeenable(struct stlibrd *brdp); +static void stli_onbedisable(struct stlibrd *brdp); +static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_onbereset(struct stlibrd *brdp); +static void stli_bbyinit(struct stlibrd *brdp); +static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_bbyreset(struct stlibrd *brdp); +static void stli_stalinit(struct stlibrd *brdp); +static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_stalreset(struct stlibrd *brdp); + +static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, unsigned int portnr); + +static int stli_initecp(struct stlibrd *brdp); +static int stli_initonb(struct stlibrd *brdp); +#if STLI_EISAPROBE != 0 +static int stli_eisamemprobe(struct stlibrd *brdp); +#endif +static int stli_initports(struct stlibrd *brdp); + +/*****************************************************************************/ + +/* + * Define the driver info for a user level shared memory device. This + * device will work sort of like the /dev/kmem device - except that it + * will give access to the shared memory on the Stallion intelligent + * board. This is also a very useful debugging tool. + */ +static const struct file_operations stli_fsiomem = { + .owner = THIS_MODULE, + .read = stli_memread, + .write = stli_memwrite, + .unlocked_ioctl = stli_memioctl, + .llseek = default_llseek, +}; + +/*****************************************************************************/ + +/* + * Define a timer_list entry for our poll routine. The slave board + * is polled every so often to see if anything needs doing. This is + * much cheaper on host cpu than using interrupts. It turns out to + * not increase character latency by much either... + */ +static DEFINE_TIMER(stli_timerlist, stli_poll, 0, 0); + +static int stli_timeron; + +/* + * Define the calculation for the timeout routine. + */ +#define STLI_TIMEOUT (jiffies + 1) + +/*****************************************************************************/ + +static struct class *istallion_class; + +static void stli_cleanup_ports(struct stlibrd *brdp) +{ + struct stliport *portp; + unsigned int j; + struct tty_struct *tty; + + for (j = 0; j < STL_MAXPORTS; j++) { + portp = brdp->ports[j]; + if (portp != NULL) { + tty = tty_port_tty_get(&portp->port); + if (tty != NULL) { + tty_hangup(tty); + tty_kref_put(tty); + } + kfree(portp); + } + } +} + +/*****************************************************************************/ + +/* + * Parse the supplied argument string, into the board conf struct. + */ + +static int stli_parsebrd(struct stlconf *confp, char **argp) +{ + unsigned int i; + char *sp; + + if (argp[0] == NULL || *argp[0] == 0) + return 0; + + for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++) + *sp = tolower(*sp); + + for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) { + if (strcmp(stli_brdstr[i].name, argp[0]) == 0) + break; + } + if (i == ARRAY_SIZE(stli_brdstr)) { + printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]); + return 0; + } + + confp->brdtype = stli_brdstr[i].type; + if (argp[1] != NULL && *argp[1] != 0) + confp->ioaddr1 = simple_strtoul(argp[1], NULL, 0); + if (argp[2] != NULL && *argp[2] != 0) + confp->memaddr = simple_strtoul(argp[2], NULL, 0); + return(1); +} + +/*****************************************************************************/ + +/* + * On the first open of the device setup the port hardware, and + * initialize the per port data structure. Since initializing the port + * requires several commands to the board we will need to wait for any + * other open that is already initializing the port. + * + * Locking: protected by the port mutex. + */ + +static int stli_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct stliport *portp = container_of(port, struct stliport, port); + struct stlibrd *brdp = stli_brds[portp->brdnr]; + int rc; + + if ((rc = stli_initopen(tty, brdp, portp)) >= 0) + clear_bit(TTY_IO_ERROR, &tty->flags); + wake_up_interruptible(&portp->raw_wait); + return rc; +} + +static int stli_open(struct tty_struct *tty, struct file *filp) +{ + struct stlibrd *brdp; + struct stliport *portp; + unsigned int minordev, brdnr, portnr; + + minordev = tty->index; + brdnr = MINOR2BRD(minordev); + if (brdnr >= stli_nrbrds) + return -ENODEV; + brdp = stli_brds[brdnr]; + if (brdp == NULL) + return -ENODEV; + if (!test_bit(BST_STARTED, &brdp->state)) + return -ENODEV; + portnr = MINOR2PORT(minordev); + if (portnr > brdp->nrports) + return -ENODEV; + + portp = brdp->ports[portnr]; + if (portp == NULL) + return -ENODEV; + if (portp->devnr < 1) + return -ENODEV; + + tty->driver_data = portp; + return tty_port_open(&portp->port, tty, filp); +} + + +/*****************************************************************************/ + +static void stli_shutdown(struct tty_port *port) +{ + struct stlibrd *brdp; + unsigned long ftype; + unsigned long flags; + struct stliport *portp = container_of(port, struct stliport, port); + + if (portp->brdnr >= stli_nrbrds) + return; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return; + + /* + * May want to wait for data to drain before closing. The BUSY + * flag keeps track of whether we are still transmitting or not. + * It is updated by messages from the slave - indicating when all + * chars really have drained. + */ + + if (!test_bit(ST_CLOSING, &portp->state)) + stli_rawclose(brdp, portp, 0, 0); + + spin_lock_irqsave(&stli_lock, flags); + clear_bit(ST_TXBUSY, &portp->state); + clear_bit(ST_RXSTOP, &portp->state); + spin_unlock_irqrestore(&stli_lock, flags); + + ftype = FLUSHTX | FLUSHRX; + stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0); +} + +static void stli_close(struct tty_struct *tty, struct file *filp) +{ + struct stliport *portp = tty->driver_data; + unsigned long flags; + if (portp == NULL) + return; + spin_lock_irqsave(&stli_lock, flags); + /* Flush any internal buffering out first */ + if (tty == stli_txcooktty) + stli_flushchars(tty); + spin_unlock_irqrestore(&stli_lock, flags); + tty_port_close(&portp->port, tty, filp); +} + +/*****************************************************************************/ + +/* + * Carry out first open operations on a port. This involves a number of + * commands to be sent to the slave. We need to open the port, set the + * notification events, set the initial port settings, get and set the + * initial signal values. We sleep and wait in between each one. But + * this still all happens pretty quickly. + */ + +static int stli_initopen(struct tty_struct *tty, + struct stlibrd *brdp, struct stliport *portp) +{ + asynotify_t nt; + asyport_t aport; + int rc; + + if ((rc = stli_rawopen(brdp, portp, 0, 1)) < 0) + return rc; + + memset(&nt, 0, sizeof(asynotify_t)); + nt.data = (DT_TXLOW | DT_TXEMPTY | DT_RXBUSY | DT_RXBREAK); + nt.signal = SG_DCD; + if ((rc = stli_cmdwait(brdp, portp, A_SETNOTIFY, &nt, + sizeof(asynotify_t), 0)) < 0) + return rc; + + stli_mkasyport(tty, portp, &aport, tty->termios); + if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport, + sizeof(asyport_t), 0)) < 0) + return rc; + + set_bit(ST_GETSIGS, &portp->state); + if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, &portp->asig, + sizeof(asysigs_t), 1)) < 0) + return rc; + if (test_and_clear_bit(ST_GETSIGS, &portp->state)) + portp->sigs = stli_mktiocm(portp->asig.sigvalue); + stli_mkasysigs(&portp->asig, 1, 1); + if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, + sizeof(asysigs_t), 0)) < 0) + return rc; + + return 0; +} + +/*****************************************************************************/ + +/* + * Send an open message to the slave. This will sleep waiting for the + * acknowledgement, so must have user context. We need to co-ordinate + * with close events here, since we don't want open and close events + * to overlap. + */ + +static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait) +{ + cdkhdr_t __iomem *hdrp; + cdkctrl_t __iomem *cp; + unsigned char __iomem *bits; + unsigned long flags; + int rc; + +/* + * Send a message to the slave to open this port. + */ + +/* + * Slave is already closing this port. This can happen if a hangup + * occurs on this port. So we must wait until it is complete. The + * order of opens and closes may not be preserved across shared + * memory, so we must wait until it is complete. + */ + wait_event_interruptible_tty(portp->raw_wait, + !test_bit(ST_CLOSING, &portp->state)); + if (signal_pending(current)) { + return -ERESTARTSYS; + } + +/* + * Everything is ready now, so write the open message into shared + * memory. Once the message is in set the service bits to say that + * this port wants service. + */ + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; + writel(arg, &cp->openarg); + writeb(1, &cp->open); + hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); + bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + + portp->portidx; + writeb(readb(bits) | portp->portbit, bits); + EBRDDISABLE(brdp); + + if (wait == 0) { + spin_unlock_irqrestore(&brd_lock, flags); + return 0; + } + +/* + * Slave is in action, so now we must wait for the open acknowledgment + * to come back. + */ + rc = 0; + set_bit(ST_OPENING, &portp->state); + spin_unlock_irqrestore(&brd_lock, flags); + + wait_event_interruptible_tty(portp->raw_wait, + !test_bit(ST_OPENING, &portp->state)); + if (signal_pending(current)) + rc = -ERESTARTSYS; + + if ((rc == 0) && (portp->rc != 0)) + rc = -EIO; + return rc; +} + +/*****************************************************************************/ + +/* + * Send a close message to the slave. Normally this will sleep waiting + * for the acknowledgement, but if wait parameter is 0 it will not. If + * wait is true then must have user context (to sleep). + */ + +static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait) +{ + cdkhdr_t __iomem *hdrp; + cdkctrl_t __iomem *cp; + unsigned char __iomem *bits; + unsigned long flags; + int rc; + +/* + * Slave is already closing this port. This can happen if a hangup + * occurs on this port. + */ + if (wait) { + wait_event_interruptible_tty(portp->raw_wait, + !test_bit(ST_CLOSING, &portp->state)); + if (signal_pending(current)) { + return -ERESTARTSYS; + } + } + +/* + * Write the close command into shared memory. + */ + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; + writel(arg, &cp->closearg); + writeb(1, &cp->close); + hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); + bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + + portp->portidx; + writeb(readb(bits) |portp->portbit, bits); + EBRDDISABLE(brdp); + + set_bit(ST_CLOSING, &portp->state); + spin_unlock_irqrestore(&brd_lock, flags); + + if (wait == 0) + return 0; + +/* + * Slave is in action, so now we must wait for the open acknowledgment + * to come back. + */ + rc = 0; + wait_event_interruptible_tty(portp->raw_wait, + !test_bit(ST_CLOSING, &portp->state)); + if (signal_pending(current)) + rc = -ERESTARTSYS; + + if ((rc == 0) && (portp->rc != 0)) + rc = -EIO; + return rc; +} + +/*****************************************************************************/ + +/* + * Send a command to the slave and wait for the response. This must + * have user context (it sleeps). This routine is generic in that it + * can send any type of command. Its purpose is to wait for that command + * to complete (as opposed to initiating the command then returning). + */ + +static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) +{ + /* + * no need for wait_event_tty because clearing ST_CMDING cannot block + * on BTM + */ + wait_event_interruptible(portp->raw_wait, + !test_bit(ST_CMDING, &portp->state)); + if (signal_pending(current)) + return -ERESTARTSYS; + + stli_sendcmd(brdp, portp, cmd, arg, size, copyback); + + wait_event_interruptible(portp->raw_wait, + !test_bit(ST_CMDING, &portp->state)); + if (signal_pending(current)) + return -ERESTARTSYS; + + if (portp->rc != 0) + return -EIO; + return 0; +} + +/*****************************************************************************/ + +/* + * Send the termios settings for this port to the slave. This sleeps + * waiting for the command to complete - so must have user context. + */ + +static int stli_setport(struct tty_struct *tty) +{ + struct stliport *portp = tty->driver_data; + struct stlibrd *brdp; + asyport_t aport; + + if (portp == NULL) + return -ENODEV; + if (portp->brdnr >= stli_nrbrds) + return -ENODEV; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return -ENODEV; + + stli_mkasyport(tty, portp, &aport, tty->termios); + return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0)); +} + +/*****************************************************************************/ + +static int stli_carrier_raised(struct tty_port *port) +{ + struct stliport *portp = container_of(port, struct stliport, port); + return (portp->sigs & TIOCM_CD) ? 1 : 0; +} + +static void stli_dtr_rts(struct tty_port *port, int on) +{ + struct stliport *portp = container_of(port, struct stliport, port); + struct stlibrd *brdp = stli_brds[portp->brdnr]; + stli_mkasysigs(&portp->asig, on, on); + if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, + sizeof(asysigs_t), 0) < 0) + printk(KERN_WARNING "istallion: dtr set failed.\n"); +} + + +/*****************************************************************************/ + +/* + * Write routine. Take the data and put it in the shared memory ring + * queue. If port is not already sending chars then need to mark the + * service bits for this port. + */ + +static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + cdkasy_t __iomem *ap; + cdkhdr_t __iomem *hdrp; + unsigned char __iomem *bits; + unsigned char __iomem *shbuf; + unsigned char *chbuf; + struct stliport *portp; + struct stlibrd *brdp; + unsigned int len, stlen, head, tail, size; + unsigned long flags; + + if (tty == stli_txcooktty) + stli_flushchars(tty); + portp = tty->driver_data; + if (portp == NULL) + return 0; + if (portp->brdnr >= stli_nrbrds) + return 0; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return 0; + chbuf = (unsigned char *) buf; + +/* + * All data is now local, shove as much as possible into shared memory. + */ + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); + head = (unsigned int) readw(&ap->txq.head); + tail = (unsigned int) readw(&ap->txq.tail); + if (tail != ((unsigned int) readw(&ap->txq.tail))) + tail = (unsigned int) readw(&ap->txq.tail); + size = portp->txsize; + if (head >= tail) { + len = size - (head - tail) - 1; + stlen = size - head; + } else { + len = tail - head - 1; + stlen = len; + } + + len = min(len, (unsigned int)count); + count = 0; + shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->txoffset); + + while (len > 0) { + stlen = min(len, stlen); + memcpy_toio(shbuf + head, chbuf, stlen); + chbuf += stlen; + len -= stlen; + count += stlen; + head += stlen; + if (head >= size) { + head = 0; + stlen = tail; + } + } + + ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); + writew(head, &ap->txq.head); + if (test_bit(ST_TXBUSY, &portp->state)) { + if (readl(&ap->changed.data) & DT_TXEMPTY) + writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data); + } + hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); + bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + + portp->portidx; + writeb(readb(bits) | portp->portbit, bits); + set_bit(ST_TXBUSY, &portp->state); + EBRDDISABLE(brdp); + spin_unlock_irqrestore(&brd_lock, flags); + + return(count); +} + +/*****************************************************************************/ + +/* + * Output a single character. We put it into a temporary local buffer + * (for speed) then write out that buffer when the flushchars routine + * is called. There is a safety catch here so that if some other port + * writes chars before the current buffer has been, then we write them + * first them do the new ports. + */ + +static int stli_putchar(struct tty_struct *tty, unsigned char ch) +{ + if (tty != stli_txcooktty) { + if (stli_txcooktty != NULL) + stli_flushchars(stli_txcooktty); + stli_txcooktty = tty; + } + + stli_txcookbuf[stli_txcooksize++] = ch; + return 0; +} + +/*****************************************************************************/ + +/* + * Transfer characters from the local TX cooking buffer to the board. + * We sort of ignore the tty that gets passed in here. We rely on the + * info stored with the TX cook buffer to tell us which port to flush + * the data on. In any case we clean out the TX cook buffer, for re-use + * by someone else. + */ + +static void stli_flushchars(struct tty_struct *tty) +{ + cdkhdr_t __iomem *hdrp; + unsigned char __iomem *bits; + cdkasy_t __iomem *ap; + struct tty_struct *cooktty; + struct stliport *portp; + struct stlibrd *brdp; + unsigned int len, stlen, head, tail, size, count, cooksize; + unsigned char *buf; + unsigned char __iomem *shbuf; + unsigned long flags; + + cooksize = stli_txcooksize; + cooktty = stli_txcooktty; + stli_txcooksize = 0; + stli_txcookrealsize = 0; + stli_txcooktty = NULL; + + if (cooktty == NULL) + return; + if (tty != cooktty) + tty = cooktty; + if (cooksize == 0) + return; + + portp = tty->driver_data; + if (portp == NULL) + return; + if (portp->brdnr >= stli_nrbrds) + return; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return; + + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + + ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); + head = (unsigned int) readw(&ap->txq.head); + tail = (unsigned int) readw(&ap->txq.tail); + if (tail != ((unsigned int) readw(&ap->txq.tail))) + tail = (unsigned int) readw(&ap->txq.tail); + size = portp->txsize; + if (head >= tail) { + len = size - (head - tail) - 1; + stlen = size - head; + } else { + len = tail - head - 1; + stlen = len; + } + + len = min(len, cooksize); + count = 0; + shbuf = EBRDGETMEMPTR(brdp, portp->txoffset); + buf = stli_txcookbuf; + + while (len > 0) { + stlen = min(len, stlen); + memcpy_toio(shbuf + head, buf, stlen); + buf += stlen; + len -= stlen; + count += stlen; + head += stlen; + if (head >= size) { + head = 0; + stlen = tail; + } + } + + ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); + writew(head, &ap->txq.head); + + if (test_bit(ST_TXBUSY, &portp->state)) { + if (readl(&ap->changed.data) & DT_TXEMPTY) + writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data); + } + hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); + bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + + portp->portidx; + writeb(readb(bits) | portp->portbit, bits); + set_bit(ST_TXBUSY, &portp->state); + + EBRDDISABLE(brdp); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +static int stli_writeroom(struct tty_struct *tty) +{ + cdkasyrq_t __iomem *rp; + struct stliport *portp; + struct stlibrd *brdp; + unsigned int head, tail, len; + unsigned long flags; + + if (tty == stli_txcooktty) { + if (stli_txcookrealsize != 0) { + len = stli_txcookrealsize - stli_txcooksize; + return len; + } + } + + portp = tty->driver_data; + if (portp == NULL) + return 0; + if (portp->brdnr >= stli_nrbrds) + return 0; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return 0; + + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq; + head = (unsigned int) readw(&rp->head); + tail = (unsigned int) readw(&rp->tail); + if (tail != ((unsigned int) readw(&rp->tail))) + tail = (unsigned int) readw(&rp->tail); + len = (head >= tail) ? (portp->txsize - (head - tail)) : (tail - head); + len--; + EBRDDISABLE(brdp); + spin_unlock_irqrestore(&brd_lock, flags); + + if (tty == stli_txcooktty) { + stli_txcookrealsize = len; + len -= stli_txcooksize; + } + return len; +} + +/*****************************************************************************/ + +/* + * Return the number of characters in the transmit buffer. Normally we + * will return the number of chars in the shared memory ring queue. + * We need to kludge around the case where the shared memory buffer is + * empty but not all characters have drained yet, for this case just + * return that there is 1 character in the buffer! + */ + +static int stli_charsinbuffer(struct tty_struct *tty) +{ + cdkasyrq_t __iomem *rp; + struct stliport *portp; + struct stlibrd *brdp; + unsigned int head, tail, len; + unsigned long flags; + + if (tty == stli_txcooktty) + stli_flushchars(tty); + portp = tty->driver_data; + if (portp == NULL) + return 0; + if (portp->brdnr >= stli_nrbrds) + return 0; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return 0; + + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq; + head = (unsigned int) readw(&rp->head); + tail = (unsigned int) readw(&rp->tail); + if (tail != ((unsigned int) readw(&rp->tail))) + tail = (unsigned int) readw(&rp->tail); + len = (head >= tail) ? (head - tail) : (portp->txsize - (tail - head)); + if ((len == 0) && test_bit(ST_TXBUSY, &portp->state)) + len = 1; + EBRDDISABLE(brdp); + spin_unlock_irqrestore(&brd_lock, flags); + + return len; +} + +/*****************************************************************************/ + +/* + * Generate the serial struct info. + */ + +static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp) +{ + struct serial_struct sio; + struct stlibrd *brdp; + + memset(&sio, 0, sizeof(struct serial_struct)); + sio.type = PORT_UNKNOWN; + sio.line = portp->portnr; + sio.irq = 0; + sio.flags = portp->port.flags; + sio.baud_base = portp->baud_base; + sio.close_delay = portp->port.close_delay; + sio.closing_wait = portp->closing_wait; + sio.custom_divisor = portp->custom_divisor; + sio.xmit_fifo_size = 0; + sio.hub6 = 0; + + brdp = stli_brds[portp->brdnr]; + if (brdp != NULL) + sio.port = brdp->iobase; + + return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? + -EFAULT : 0; +} + +/*****************************************************************************/ + +/* + * Set port according to the serial struct info. + * At this point we do not do any auto-configure stuff, so we will + * just quietly ignore any requests to change irq, etc. + */ + +static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp) +{ + struct serial_struct sio; + int rc; + struct stliport *portp = tty->driver_data; + + if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) + return -EFAULT; + if (!capable(CAP_SYS_ADMIN)) { + if ((sio.baud_base != portp->baud_base) || + (sio.close_delay != portp->port.close_delay) || + ((sio.flags & ~ASYNC_USR_MASK) != + (portp->port.flags & ~ASYNC_USR_MASK))) + return -EPERM; + } + + portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | + (sio.flags & ASYNC_USR_MASK); + portp->baud_base = sio.baud_base; + portp->port.close_delay = sio.close_delay; + portp->closing_wait = sio.closing_wait; + portp->custom_divisor = sio.custom_divisor; + + if ((rc = stli_setport(tty)) < 0) + return rc; + return 0; +} + +/*****************************************************************************/ + +static int stli_tiocmget(struct tty_struct *tty) +{ + struct stliport *portp = tty->driver_data; + struct stlibrd *brdp; + int rc; + + if (portp == NULL) + return -ENODEV; + if (portp->brdnr >= stli_nrbrds) + return 0; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return 0; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, + &portp->asig, sizeof(asysigs_t), 1)) < 0) + return rc; + + return stli_mktiocm(portp->asig.sigvalue); +} + +static int stli_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct stliport *portp = tty->driver_data; + struct stlibrd *brdp; + int rts = -1, dtr = -1; + + if (portp == NULL) + return -ENODEV; + if (portp->brdnr >= stli_nrbrds) + return 0; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return 0; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + + stli_mkasysigs(&portp->asig, dtr, rts); + + return stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, + sizeof(asysigs_t), 0); +} + +static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) +{ + struct stliport *portp; + struct stlibrd *brdp; + int rc; + void __user *argp = (void __user *)arg; + + portp = tty->driver_data; + if (portp == NULL) + return -ENODEV; + if (portp->brdnr >= stli_nrbrds) + return 0; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return 0; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + rc = 0; + + switch (cmd) { + case TIOCGSERIAL: + rc = stli_getserial(portp, argp); + break; + case TIOCSSERIAL: + rc = stli_setserial(tty, argp); + break; + case STL_GETPFLAG: + rc = put_user(portp->pflag, (unsigned __user *)argp); + break; + case STL_SETPFLAG: + if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0) + stli_setport(tty); + break; + case COM_GETPORTSTATS: + rc = stli_getportstats(tty, portp, argp); + break; + case COM_CLRPORTSTATS: + rc = stli_clrportstats(portp, argp); + break; + case TIOCSERCONFIG: + case TIOCSERGWILD: + case TIOCSERSWILD: + case TIOCSERGETLSR: + case TIOCSERGSTRUCT: + case TIOCSERGETMULTI: + case TIOCSERSETMULTI: + default: + rc = -ENOIOCTLCMD; + break; + } + + return rc; +} + +/*****************************************************************************/ + +/* + * This routine assumes that we have user context and can sleep. + * Looks like it is true for the current ttys implementation..!! + */ + +static void stli_settermios(struct tty_struct *tty, struct ktermios *old) +{ + struct stliport *portp; + struct stlibrd *brdp; + struct ktermios *tiosp; + asyport_t aport; + + portp = tty->driver_data; + if (portp == NULL) + return; + if (portp->brdnr >= stli_nrbrds) + return; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return; + + tiosp = tty->termios; + + stli_mkasyport(tty, portp, &aport, tiosp); + stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0); + stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1); + stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, + sizeof(asysigs_t), 0); + if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) + tty->hw_stopped = 0; + if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL)) + wake_up_interruptible(&portp->port.open_wait); +} + +/*****************************************************************************/ + +/* + * Attempt to flow control who ever is sending us data. We won't really + * do any flow control action here. We can't directly, and even if we + * wanted to we would have to send a command to the slave. The slave + * knows how to flow control, and will do so when its buffers reach its + * internal high water marks. So what we will do is set a local state + * bit that will stop us sending any RX data up from the poll routine + * (which is the place where RX data from the slave is handled). + */ + +static void stli_throttle(struct tty_struct *tty) +{ + struct stliport *portp = tty->driver_data; + if (portp == NULL) + return; + set_bit(ST_RXSTOP, &portp->state); +} + +/*****************************************************************************/ + +/* + * Unflow control the device sending us data... That means that all + * we have to do is clear the RXSTOP state bit. The next poll call + * will then be able to pass the RX data back up. + */ + +static void stli_unthrottle(struct tty_struct *tty) +{ + struct stliport *portp = tty->driver_data; + if (portp == NULL) + return; + clear_bit(ST_RXSTOP, &portp->state); +} + +/*****************************************************************************/ + +/* + * Stop the transmitter. + */ + +static void stli_stop(struct tty_struct *tty) +{ +} + +/*****************************************************************************/ + +/* + * Start the transmitter again. + */ + +static void stli_start(struct tty_struct *tty) +{ +} + +/*****************************************************************************/ + + +/* + * Hangup this port. This is pretty much like closing the port, only + * a little more brutal. No waiting for data to drain. Shutdown the + * port and maybe drop signals. This is rather tricky really. We want + * to close the port as well. + */ + +static void stli_hangup(struct tty_struct *tty) +{ + struct stliport *portp = tty->driver_data; + tty_port_hangup(&portp->port); +} + +/*****************************************************************************/ + +/* + * Flush characters from the lower buffer. We may not have user context + * so we cannot sleep waiting for it to complete. Also we need to check + * if there is chars for this port in the TX cook buffer, and flush them + * as well. + */ + +static void stli_flushbuffer(struct tty_struct *tty) +{ + struct stliport *portp; + struct stlibrd *brdp; + unsigned long ftype, flags; + + portp = tty->driver_data; + if (portp == NULL) + return; + if (portp->brdnr >= stli_nrbrds) + return; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return; + + spin_lock_irqsave(&brd_lock, flags); + if (tty == stli_txcooktty) { + stli_txcooktty = NULL; + stli_txcooksize = 0; + stli_txcookrealsize = 0; + } + if (test_bit(ST_CMDING, &portp->state)) { + set_bit(ST_DOFLUSHTX, &portp->state); + } else { + ftype = FLUSHTX; + if (test_bit(ST_DOFLUSHRX, &portp->state)) { + ftype |= FLUSHRX; + clear_bit(ST_DOFLUSHRX, &portp->state); + } + __stli_sendcmd(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0); + } + spin_unlock_irqrestore(&brd_lock, flags); + tty_wakeup(tty); +} + +/*****************************************************************************/ + +static int stli_breakctl(struct tty_struct *tty, int state) +{ + struct stlibrd *brdp; + struct stliport *portp; + long arg; + + portp = tty->driver_data; + if (portp == NULL) + return -EINVAL; + if (portp->brdnr >= stli_nrbrds) + return -EINVAL; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return -EINVAL; + + arg = (state == -1) ? BREAKON : BREAKOFF; + stli_cmdwait(brdp, portp, A_BREAK, &arg, sizeof(long), 0); + return 0; +} + +/*****************************************************************************/ + +static void stli_waituntilsent(struct tty_struct *tty, int timeout) +{ + struct stliport *portp; + unsigned long tend; + + portp = tty->driver_data; + if (portp == NULL) + return; + + if (timeout == 0) + timeout = HZ; + tend = jiffies + timeout; + + while (test_bit(ST_TXBUSY, &portp->state)) { + if (signal_pending(current)) + break; + msleep_interruptible(20); + if (time_after_eq(jiffies, tend)) + break; + } +} + +/*****************************************************************************/ + +static void stli_sendxchar(struct tty_struct *tty, char ch) +{ + struct stlibrd *brdp; + struct stliport *portp; + asyctrl_t actrl; + + portp = tty->driver_data; + if (portp == NULL) + return; + if (portp->brdnr >= stli_nrbrds) + return; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return; + + memset(&actrl, 0, sizeof(asyctrl_t)); + if (ch == STOP_CHAR(tty)) { + actrl.rxctrl = CT_STOPFLOW; + } else if (ch == START_CHAR(tty)) { + actrl.rxctrl = CT_STARTFLOW; + } else { + actrl.txctrl = CT_SENDCHR; + actrl.tximdch = ch; + } + stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0); +} + +static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stliport *portp, int portnr) +{ + char *uart; + int rc; + + rc = stli_portcmdstats(NULL, portp); + + uart = "UNKNOWN"; + if (test_bit(BST_STARTED, &brdp->state)) { + switch (stli_comstats.hwid) { + case 0: uart = "2681"; break; + case 1: uart = "SC26198"; break; + default:uart = "CD1400"; break; + } + } + seq_printf(m, "%d: uart:%s ", portnr, uart); + + if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) { + char sep; + + seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal, + (int) stli_comstats.rxtotal); + + if (stli_comstats.rxframing) + seq_printf(m, " fe:%d", + (int) stli_comstats.rxframing); + if (stli_comstats.rxparity) + seq_printf(m, " pe:%d", + (int) stli_comstats.rxparity); + if (stli_comstats.rxbreaks) + seq_printf(m, " brk:%d", + (int) stli_comstats.rxbreaks); + if (stli_comstats.rxoverrun) + seq_printf(m, " oe:%d", + (int) stli_comstats.rxoverrun); + + sep = ' '; + if (stli_comstats.signals & TIOCM_RTS) { + seq_printf(m, "%c%s", sep, "RTS"); + sep = '|'; + } + if (stli_comstats.signals & TIOCM_CTS) { + seq_printf(m, "%c%s", sep, "CTS"); + sep = '|'; + } + if (stli_comstats.signals & TIOCM_DTR) { + seq_printf(m, "%c%s", sep, "DTR"); + sep = '|'; + } + if (stli_comstats.signals & TIOCM_CD) { + seq_printf(m, "%c%s", sep, "DCD"); + sep = '|'; + } + if (stli_comstats.signals & TIOCM_DSR) { + seq_printf(m, "%c%s", sep, "DSR"); + sep = '|'; + } + } + seq_putc(m, '\n'); +} + +/*****************************************************************************/ + +/* + * Port info, read from the /proc file system. + */ + +static int stli_proc_show(struct seq_file *m, void *v) +{ + struct stlibrd *brdp; + struct stliport *portp; + unsigned int brdnr, portnr, totalport; + + totalport = 0; + + seq_printf(m, "%s: version %s\n", stli_drvtitle, stli_drvversion); + +/* + * We scan through for each board, panel and port. The offset is + * calculated on the fly, and irrelevant ports are skipped. + */ + for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) { + brdp = stli_brds[brdnr]; + if (brdp == NULL) + continue; + if (brdp->state == 0) + continue; + + totalport = brdnr * STL_MAXPORTS; + for (portnr = 0; (portnr < brdp->nrports); portnr++, + totalport++) { + portp = brdp->ports[portnr]; + if (portp == NULL) + continue; + stli_portinfo(m, brdp, portp, totalport); + } + } + return 0; +} + +static int stli_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, stli_proc_show, NULL); +} + +static const struct file_operations stli_proc_fops = { + .owner = THIS_MODULE, + .open = stli_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/*****************************************************************************/ + +/* + * Generic send command routine. This will send a message to the slave, + * of the specified type with the specified argument. Must be very + * careful of data that will be copied out from shared memory - + * containing command results. The command completion is all done from + * a poll routine that does not have user context. Therefore you cannot + * copy back directly into user space, or to the kernel stack of a + * process. This routine does not sleep, so can be called from anywhere. + * + * The caller must hold the brd_lock (see also stli_sendcmd the usual + * entry point) + */ + +static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) +{ + cdkhdr_t __iomem *hdrp; + cdkctrl_t __iomem *cp; + unsigned char __iomem *bits; + + if (test_bit(ST_CMDING, &portp->state)) { + printk(KERN_ERR "istallion: command already busy, cmd=%x!\n", + (int) cmd); + return; + } + + EBRDENABLE(brdp); + cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; + if (size > 0) { + memcpy_toio((void __iomem *) &(cp->args[0]), arg, size); + if (copyback) { + portp->argp = arg; + portp->argsize = size; + } + } + writel(0, &cp->status); + writel(cmd, &cp->cmd); + hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); + bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset + + portp->portidx; + writeb(readb(bits) | portp->portbit, bits); + set_bit(ST_CMDING, &portp->state); + EBRDDISABLE(brdp); +} + +static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) +{ + unsigned long flags; + + spin_lock_irqsave(&brd_lock, flags); + __stli_sendcmd(brdp, portp, cmd, arg, size, copyback); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Read data from shared memory. This assumes that the shared memory + * is enabled and that interrupts are off. Basically we just empty out + * the shared memory buffer into the tty buffer. Must be careful to + * handle the case where we fill up the tty buffer, but still have + * more chars to unload. + */ + +static void stli_read(struct stlibrd *brdp, struct stliport *portp) +{ + cdkasyrq_t __iomem *rp; + char __iomem *shbuf; + struct tty_struct *tty; + unsigned int head, tail, size; + unsigned int len, stlen; + + if (test_bit(ST_RXSTOP, &portp->state)) + return; + tty = tty_port_tty_get(&portp->port); + if (tty == NULL) + return; + + rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq; + head = (unsigned int) readw(&rp->head); + if (head != ((unsigned int) readw(&rp->head))) + head = (unsigned int) readw(&rp->head); + tail = (unsigned int) readw(&rp->tail); + size = portp->rxsize; + if (head >= tail) { + len = head - tail; + stlen = len; + } else { + len = size - (tail - head); + stlen = size - tail; + } + + len = tty_buffer_request_room(tty, len); + + shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->rxoffset); + + while (len > 0) { + unsigned char *cptr; + + stlen = min(len, stlen); + tty_prepare_flip_string(tty, &cptr, stlen); + memcpy_fromio(cptr, shbuf + tail, stlen); + len -= stlen; + tail += stlen; + if (tail >= size) { + tail = 0; + stlen = head; + } + } + rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq; + writew(tail, &rp->tail); + + if (head != tail) + set_bit(ST_RXING, &portp->state); + + tty_schedule_flip(tty); + tty_kref_put(tty); +} + +/*****************************************************************************/ + +/* + * Set up and carry out any delayed commands. There is only a small set + * of slave commands that can be done "off-level". So it is not too + * difficult to deal with them here. + */ + +static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp) +{ + int cmd; + + if (test_bit(ST_DOSIGS, &portp->state)) { + if (test_bit(ST_DOFLUSHTX, &portp->state) && + test_bit(ST_DOFLUSHRX, &portp->state)) + cmd = A_SETSIGNALSF; + else if (test_bit(ST_DOFLUSHTX, &portp->state)) + cmd = A_SETSIGNALSFTX; + else if (test_bit(ST_DOFLUSHRX, &portp->state)) + cmd = A_SETSIGNALSFRX; + else + cmd = A_SETSIGNALS; + clear_bit(ST_DOFLUSHTX, &portp->state); + clear_bit(ST_DOFLUSHRX, &portp->state); + clear_bit(ST_DOSIGS, &portp->state); + memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &portp->asig, + sizeof(asysigs_t)); + writel(0, &cp->status); + writel(cmd, &cp->cmd); + set_bit(ST_CMDING, &portp->state); + } else if (test_bit(ST_DOFLUSHTX, &portp->state) || + test_bit(ST_DOFLUSHRX, &portp->state)) { + cmd = ((test_bit(ST_DOFLUSHTX, &portp->state)) ? FLUSHTX : 0); + cmd |= ((test_bit(ST_DOFLUSHRX, &portp->state)) ? FLUSHRX : 0); + clear_bit(ST_DOFLUSHTX, &portp->state); + clear_bit(ST_DOFLUSHRX, &portp->state); + memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &cmd, sizeof(int)); + writel(0, &cp->status); + writel(A_FLUSH, &cp->cmd); + set_bit(ST_CMDING, &portp->state); + } +} + +/*****************************************************************************/ + +/* + * Host command service checking. This handles commands or messages + * coming from the slave to the host. Must have board shared memory + * enabled and interrupts off when called. Notice that by servicing the + * read data last we don't need to change the shared memory pointer + * during processing (which is a slow IO operation). + * Return value indicates if this port is still awaiting actions from + * the slave (like open, command, or even TX data being sent). If 0 + * then port is still busy, otherwise no longer busy. + */ + +static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp) +{ + cdkasy_t __iomem *ap; + cdkctrl_t __iomem *cp; + struct tty_struct *tty; + asynotify_t nt; + unsigned long oldsigs; + int rc, donerx; + + ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); + cp = &ap->ctrl; + +/* + * Check if we are waiting for an open completion message. + */ + if (test_bit(ST_OPENING, &portp->state)) { + rc = readl(&cp->openarg); + if (readb(&cp->open) == 0 && rc != 0) { + if (rc > 0) + rc--; + writel(0, &cp->openarg); + portp->rc = rc; + clear_bit(ST_OPENING, &portp->state); + wake_up_interruptible(&portp->raw_wait); + } + } + +/* + * Check if we are waiting for a close completion message. + */ + if (test_bit(ST_CLOSING, &portp->state)) { + rc = (int) readl(&cp->closearg); + if (readb(&cp->close) == 0 && rc != 0) { + if (rc > 0) + rc--; + writel(0, &cp->closearg); + portp->rc = rc; + clear_bit(ST_CLOSING, &portp->state); + wake_up_interruptible(&portp->raw_wait); + } + } + +/* + * Check if we are waiting for a command completion message. We may + * need to copy out the command results associated with this command. + */ + if (test_bit(ST_CMDING, &portp->state)) { + rc = readl(&cp->status); + if (readl(&cp->cmd) == 0 && rc != 0) { + if (rc > 0) + rc--; + if (portp->argp != NULL) { + memcpy_fromio(portp->argp, (void __iomem *) &(cp->args[0]), + portp->argsize); + portp->argp = NULL; + } + writel(0, &cp->status); + portp->rc = rc; + clear_bit(ST_CMDING, &portp->state); + stli_dodelaycmd(portp, cp); + wake_up_interruptible(&portp->raw_wait); + } + } + +/* + * Check for any notification messages ready. This includes lots of + * different types of events - RX chars ready, RX break received, + * TX data low or empty in the slave, modem signals changed state. + */ + donerx = 0; + + if (ap->notify) { + nt = ap->changed; + ap->notify = 0; + tty = tty_port_tty_get(&portp->port); + + if (nt.signal & SG_DCD) { + oldsigs = portp->sigs; + portp->sigs = stli_mktiocm(nt.sigvalue); + clear_bit(ST_GETSIGS, &portp->state); + if ((portp->sigs & TIOCM_CD) && + ((oldsigs & TIOCM_CD) == 0)) + wake_up_interruptible(&portp->port.open_wait); + if ((oldsigs & TIOCM_CD) && + ((portp->sigs & TIOCM_CD) == 0)) { + if (portp->port.flags & ASYNC_CHECK_CD) { + if (tty) + tty_hangup(tty); + } + } + } + + if (nt.data & DT_TXEMPTY) + clear_bit(ST_TXBUSY, &portp->state); + if (nt.data & (DT_TXEMPTY | DT_TXLOW)) { + if (tty != NULL) { + tty_wakeup(tty); + EBRDENABLE(brdp); + } + } + + if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) { + if (tty != NULL) { + tty_insert_flip_char(tty, 0, TTY_BREAK); + if (portp->port.flags & ASYNC_SAK) { + do_SAK(tty); + EBRDENABLE(brdp); + } + tty_schedule_flip(tty); + } + } + tty_kref_put(tty); + + if (nt.data & DT_RXBUSY) { + donerx++; + stli_read(brdp, portp); + } + } + +/* + * It might seem odd that we are checking for more RX chars here. + * But, we need to handle the case where the tty buffer was previously + * filled, but we had more characters to pass up. The slave will not + * send any more RX notify messages until the RX buffer has been emptied. + * But it will leave the service bits on (since the buffer is not empty). + * So from here we can try to process more RX chars. + */ + if ((!donerx) && test_bit(ST_RXING, &portp->state)) { + clear_bit(ST_RXING, &portp->state); + stli_read(brdp, portp); + } + + return((test_bit(ST_OPENING, &portp->state) || + test_bit(ST_CLOSING, &portp->state) || + test_bit(ST_CMDING, &portp->state) || + test_bit(ST_TXBUSY, &portp->state) || + test_bit(ST_RXING, &portp->state)) ? 0 : 1); +} + +/*****************************************************************************/ + +/* + * Service all ports on a particular board. Assumes that the boards + * shared memory is enabled, and that the page pointer is pointed + * at the cdk header structure. + */ + +static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp) +{ + struct stliport *portp; + unsigned char hostbits[(STL_MAXCHANS / 8) + 1]; + unsigned char slavebits[(STL_MAXCHANS / 8) + 1]; + unsigned char __iomem *slavep; + int bitpos, bitat, bitsize; + int channr, nrdevs, slavebitchange; + + bitsize = brdp->bitsize; + nrdevs = brdp->nrdevs; + +/* + * Check if slave wants any service. Basically we try to do as + * little work as possible here. There are 2 levels of service + * bits. So if there is nothing to do we bail early. We check + * 8 service bits at a time in the inner loop, so we can bypass + * the lot if none of them want service. + */ + memcpy_fromio(&hostbits[0], (((unsigned char __iomem *) hdrp) + brdp->hostoffset), + bitsize); + + memset(&slavebits[0], 0, bitsize); + slavebitchange = 0; + + for (bitpos = 0; (bitpos < bitsize); bitpos++) { + if (hostbits[bitpos] == 0) + continue; + channr = bitpos * 8; + for (bitat = 0x1; (channr < nrdevs); channr++, bitat <<= 1) { + if (hostbits[bitpos] & bitat) { + portp = brdp->ports[(channr - 1)]; + if (stli_hostcmd(brdp, portp)) { + slavebitchange++; + slavebits[bitpos] |= bitat; + } + } + } + } + +/* + * If any of the ports are no longer busy then update them in the + * slave request bits. We need to do this after, since a host port + * service may initiate more slave requests. + */ + if (slavebitchange) { + hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); + slavep = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset; + for (bitpos = 0; (bitpos < bitsize); bitpos++) { + if (readb(slavebits + bitpos)) + writeb(readb(slavep + bitpos) & ~slavebits[bitpos], slavebits + bitpos); + } + } +} + +/*****************************************************************************/ + +/* + * Driver poll routine. This routine polls the boards in use and passes + * messages back up to host when necessary. This is actually very + * CPU efficient, since we will always have the kernel poll clock, it + * adds only a few cycles when idle (since board service can be + * determined very easily), but when loaded generates no interrupts + * (with their expensive associated context change). + */ + +static void stli_poll(unsigned long arg) +{ + cdkhdr_t __iomem *hdrp; + struct stlibrd *brdp; + unsigned int brdnr; + + mod_timer(&stli_timerlist, STLI_TIMEOUT); + +/* + * Check each board and do any servicing required. + */ + for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) { + brdp = stli_brds[brdnr]; + if (brdp == NULL) + continue; + if (!test_bit(BST_STARTED, &brdp->state)) + continue; + + spin_lock(&brd_lock); + EBRDENABLE(brdp); + hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); + if (readb(&hdrp->hostreq)) + stli_brdpoll(brdp, hdrp); + EBRDDISABLE(brdp); + spin_unlock(&brd_lock); + } +} + +/*****************************************************************************/ + +/* + * Translate the termios settings into the port setting structure of + * the slave. + */ + +static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, + asyport_t *pp, struct ktermios *tiosp) +{ + memset(pp, 0, sizeof(asyport_t)); + +/* + * Start of by setting the baud, char size, parity and stop bit info. + */ + pp->baudout = tty_get_baud_rate(tty); + if ((tiosp->c_cflag & CBAUD) == B38400) { + if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + pp->baudout = 57600; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + pp->baudout = 115200; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + pp->baudout = 230400; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + pp->baudout = 460800; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) + pp->baudout = (portp->baud_base / portp->custom_divisor); + } + if (pp->baudout > STL_MAXBAUD) + pp->baudout = STL_MAXBAUD; + pp->baudin = pp->baudout; + + switch (tiosp->c_cflag & CSIZE) { + case CS5: + pp->csize = 5; + break; + case CS6: + pp->csize = 6; + break; + case CS7: + pp->csize = 7; + break; + default: + pp->csize = 8; + break; + } + + if (tiosp->c_cflag & CSTOPB) + pp->stopbs = PT_STOP2; + else + pp->stopbs = PT_STOP1; + + if (tiosp->c_cflag & PARENB) { + if (tiosp->c_cflag & PARODD) + pp->parity = PT_ODDPARITY; + else + pp->parity = PT_EVENPARITY; + } else { + pp->parity = PT_NOPARITY; + } + +/* + * Set up any flow control options enabled. + */ + if (tiosp->c_iflag & IXON) { + pp->flow |= F_IXON; + if (tiosp->c_iflag & IXANY) + pp->flow |= F_IXANY; + } + if (tiosp->c_cflag & CRTSCTS) + pp->flow |= (F_RTSFLOW | F_CTSFLOW); + + pp->startin = tiosp->c_cc[VSTART]; + pp->stopin = tiosp->c_cc[VSTOP]; + pp->startout = tiosp->c_cc[VSTART]; + pp->stopout = tiosp->c_cc[VSTOP]; + +/* + * Set up the RX char marking mask with those RX error types we must + * catch. We can get the slave to help us out a little here, it will + * ignore parity errors and breaks for us, and mark parity errors in + * the data stream. + */ + if (tiosp->c_iflag & IGNPAR) + pp->iflag |= FI_IGNRXERRS; + if (tiosp->c_iflag & IGNBRK) + pp->iflag |= FI_IGNBREAK; + + portp->rxmarkmsk = 0; + if (tiosp->c_iflag & (INPCK | PARMRK)) + pp->iflag |= FI_1MARKRXERRS; + if (tiosp->c_iflag & BRKINT) + portp->rxmarkmsk |= BRKINT; + +/* + * Set up clocal processing as required. + */ + if (tiosp->c_cflag & CLOCAL) + portp->port.flags &= ~ASYNC_CHECK_CD; + else + portp->port.flags |= ASYNC_CHECK_CD; + +/* + * Transfer any persistent flags into the asyport structure. + */ + pp->pflag = (portp->pflag & 0xffff); + pp->vmin = (portp->pflag & P_RXIMIN) ? 1 : 0; + pp->vtime = (portp->pflag & P_RXITIME) ? 1 : 0; + pp->cc[1] = (portp->pflag & P_RXTHOLD) ? 1 : 0; +} + +/*****************************************************************************/ + +/* + * Construct a slave signals structure for setting the DTR and RTS + * signals as specified. + */ + +static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts) +{ + memset(sp, 0, sizeof(asysigs_t)); + if (dtr >= 0) { + sp->signal |= SG_DTR; + sp->sigvalue |= ((dtr > 0) ? SG_DTR : 0); + } + if (rts >= 0) { + sp->signal |= SG_RTS; + sp->sigvalue |= ((rts > 0) ? SG_RTS : 0); + } +} + +/*****************************************************************************/ + +/* + * Convert the signals returned from the slave into a local TIOCM type + * signals value. We keep them locally in TIOCM format. + */ + +static long stli_mktiocm(unsigned long sigvalue) +{ + long tiocm = 0; + tiocm |= ((sigvalue & SG_DCD) ? TIOCM_CD : 0); + tiocm |= ((sigvalue & SG_CTS) ? TIOCM_CTS : 0); + tiocm |= ((sigvalue & SG_RI) ? TIOCM_RI : 0); + tiocm |= ((sigvalue & SG_DSR) ? TIOCM_DSR : 0); + tiocm |= ((sigvalue & SG_DTR) ? TIOCM_DTR : 0); + tiocm |= ((sigvalue & SG_RTS) ? TIOCM_RTS : 0); + return(tiocm); +} + +/*****************************************************************************/ + +/* + * All panels and ports actually attached have been worked out. All + * we need to do here is set up the appropriate per port data structures. + */ + +static int stli_initports(struct stlibrd *brdp) +{ + struct stliport *portp; + unsigned int i, panelnr, panelport; + + for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) { + portp = kzalloc(sizeof(struct stliport), GFP_KERNEL); + if (!portp) { + printk(KERN_WARNING "istallion: failed to allocate port structure\n"); + continue; + } + tty_port_init(&portp->port); + portp->port.ops = &stli_port_ops; + portp->magic = STLI_PORTMAGIC; + portp->portnr = i; + portp->brdnr = brdp->brdnr; + portp->panelnr = panelnr; + portp->baud_base = STL_BAUDBASE; + portp->port.close_delay = STL_CLOSEDELAY; + portp->closing_wait = 30 * HZ; + init_waitqueue_head(&portp->port.open_wait); + init_waitqueue_head(&portp->port.close_wait); + init_waitqueue_head(&portp->raw_wait); + panelport++; + if (panelport >= brdp->panels[panelnr]) { + panelport = 0; + panelnr++; + } + brdp->ports[i] = portp; + } + + return 0; +} + +/*****************************************************************************/ + +/* + * All the following routines are board specific hardware operations. + */ + +static void stli_ecpinit(struct stlibrd *brdp) +{ + unsigned long memconf; + + outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR)); + udelay(10); + outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); + udelay(100); + + memconf = (brdp->memaddr & ECP_ATADDRMASK) >> ECP_ATADDRSHFT; + outb(memconf, (brdp->iobase + ECP_ATMEMAR)); +} + +/*****************************************************************************/ + +static void stli_ecpenable(struct stlibrd *brdp) +{ + outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR)); +} + +/*****************************************************************************/ + +static void stli_ecpdisable(struct stlibrd *brdp) +{ + outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); +} + +/*****************************************************************************/ + +static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) +{ + void __iomem *ptr; + unsigned char val; + + if (offset > brdp->memsize) { + printk(KERN_ERR "istallion: shared memory pointer=%x out of " + "range at line=%d(%d), brd=%d\n", + (int) offset, line, __LINE__, brdp->brdnr); + ptr = NULL; + val = 0; + } else { + ptr = brdp->membase + (offset % ECP_ATPAGESIZE); + val = (unsigned char) (offset / ECP_ATPAGESIZE); + } + outb(val, (brdp->iobase + ECP_ATMEMPR)); + return(ptr); +} + +/*****************************************************************************/ + +static void stli_ecpreset(struct stlibrd *brdp) +{ + outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR)); + udelay(10); + outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); + udelay(500); +} + +/*****************************************************************************/ + +static void stli_ecpintr(struct stlibrd *brdp) +{ + outb(0x1, brdp->iobase); +} + +/*****************************************************************************/ + +/* + * The following set of functions act on ECP EISA boards. + */ + +static void stli_ecpeiinit(struct stlibrd *brdp) +{ + unsigned long memconf; + + outb(0x1, (brdp->iobase + ECP_EIBRDENAB)); + outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); + udelay(10); + outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); + udelay(500); + + memconf = (brdp->memaddr & ECP_EIADDRMASKL) >> ECP_EIADDRSHFTL; + outb(memconf, (brdp->iobase + ECP_EIMEMARL)); + memconf = (brdp->memaddr & ECP_EIADDRMASKH) >> ECP_EIADDRSHFTH; + outb(memconf, (brdp->iobase + ECP_EIMEMARH)); +} + +/*****************************************************************************/ + +static void stli_ecpeienable(struct stlibrd *brdp) +{ + outb(ECP_EIENABLE, (brdp->iobase + ECP_EICONFR)); +} + +/*****************************************************************************/ + +static void stli_ecpeidisable(struct stlibrd *brdp) +{ + outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); +} + +/*****************************************************************************/ + +static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line) +{ + void __iomem *ptr; + unsigned char val; + + if (offset > brdp->memsize) { + printk(KERN_ERR "istallion: shared memory pointer=%x out of " + "range at line=%d(%d), brd=%d\n", + (int) offset, line, __LINE__, brdp->brdnr); + ptr = NULL; + val = 0; + } else { + ptr = brdp->membase + (offset % ECP_EIPAGESIZE); + if (offset < ECP_EIPAGESIZE) + val = ECP_EIENABLE; + else + val = ECP_EIENABLE | 0x40; + } + outb(val, (brdp->iobase + ECP_EICONFR)); + return(ptr); +} + +/*****************************************************************************/ + +static void stli_ecpeireset(struct stlibrd *brdp) +{ + outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); + udelay(10); + outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); + udelay(500); +} + +/*****************************************************************************/ + +/* + * The following set of functions act on ECP MCA boards. + */ + +static void stli_ecpmcenable(struct stlibrd *brdp) +{ + outb(ECP_MCENABLE, (brdp->iobase + ECP_MCCONFR)); +} + +/*****************************************************************************/ + +static void stli_ecpmcdisable(struct stlibrd *brdp) +{ + outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR)); +} + +/*****************************************************************************/ + +static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) +{ + void __iomem *ptr; + unsigned char val; + + if (offset > brdp->memsize) { + printk(KERN_ERR "istallion: shared memory pointer=%x out of " + "range at line=%d(%d), brd=%d\n", + (int) offset, line, __LINE__, brdp->brdnr); + ptr = NULL; + val = 0; + } else { + ptr = brdp->membase + (offset % ECP_MCPAGESIZE); + val = ((unsigned char) (offset / ECP_MCPAGESIZE)) | ECP_MCENABLE; + } + outb(val, (brdp->iobase + ECP_MCCONFR)); + return(ptr); +} + +/*****************************************************************************/ + +static void stli_ecpmcreset(struct stlibrd *brdp) +{ + outb(ECP_MCSTOP, (brdp->iobase + ECP_MCCONFR)); + udelay(10); + outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR)); + udelay(500); +} + +/*****************************************************************************/ + +/* + * The following set of functions act on ECP PCI boards. + */ + +static void stli_ecppciinit(struct stlibrd *brdp) +{ + outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR)); + udelay(10); + outb(0, (brdp->iobase + ECP_PCICONFR)); + udelay(500); +} + +/*****************************************************************************/ + +static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line) +{ + void __iomem *ptr; + unsigned char val; + + if (offset > brdp->memsize) { + printk(KERN_ERR "istallion: shared memory pointer=%x out of " + "range at line=%d(%d), board=%d\n", + (int) offset, line, __LINE__, brdp->brdnr); + ptr = NULL; + val = 0; + } else { + ptr = brdp->membase + (offset % ECP_PCIPAGESIZE); + val = (offset / ECP_PCIPAGESIZE) << 1; + } + outb(val, (brdp->iobase + ECP_PCICONFR)); + return(ptr); +} + +/*****************************************************************************/ + +static void stli_ecppcireset(struct stlibrd *brdp) +{ + outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR)); + udelay(10); + outb(0, (brdp->iobase + ECP_PCICONFR)); + udelay(500); +} + +/*****************************************************************************/ + +/* + * The following routines act on ONboards. + */ + +static void stli_onbinit(struct stlibrd *brdp) +{ + unsigned long memconf; + + outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR)); + udelay(10); + outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR)); + mdelay(1000); + + memconf = (brdp->memaddr & ONB_ATADDRMASK) >> ONB_ATADDRSHFT; + outb(memconf, (brdp->iobase + ONB_ATMEMAR)); + outb(0x1, brdp->iobase); + mdelay(1); +} + +/*****************************************************************************/ + +static void stli_onbenable(struct stlibrd *brdp) +{ + outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR)); +} + +/*****************************************************************************/ + +static void stli_onbdisable(struct stlibrd *brdp) +{ + outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR)); +} + +/*****************************************************************************/ + +static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) +{ + void __iomem *ptr; + + if (offset > brdp->memsize) { + printk(KERN_ERR "istallion: shared memory pointer=%x out of " + "range at line=%d(%d), brd=%d\n", + (int) offset, line, __LINE__, brdp->brdnr); + ptr = NULL; + } else { + ptr = brdp->membase + (offset % ONB_ATPAGESIZE); + } + return(ptr); +} + +/*****************************************************************************/ + +static void stli_onbreset(struct stlibrd *brdp) +{ + outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR)); + udelay(10); + outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR)); + mdelay(1000); +} + +/*****************************************************************************/ + +/* + * The following routines act on ONboard EISA. + */ + +static void stli_onbeinit(struct stlibrd *brdp) +{ + unsigned long memconf; + + outb(0x1, (brdp->iobase + ONB_EIBRDENAB)); + outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); + udelay(10); + outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); + mdelay(1000); + + memconf = (brdp->memaddr & ONB_EIADDRMASKL) >> ONB_EIADDRSHFTL; + outb(memconf, (brdp->iobase + ONB_EIMEMARL)); + memconf = (brdp->memaddr & ONB_EIADDRMASKH) >> ONB_EIADDRSHFTH; + outb(memconf, (brdp->iobase + ONB_EIMEMARH)); + outb(0x1, brdp->iobase); + mdelay(1); +} + +/*****************************************************************************/ + +static void stli_onbeenable(struct stlibrd *brdp) +{ + outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR)); +} + +/*****************************************************************************/ + +static void stli_onbedisable(struct stlibrd *brdp) +{ + outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); +} + +/*****************************************************************************/ + +static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line) +{ + void __iomem *ptr; + unsigned char val; + + if (offset > brdp->memsize) { + printk(KERN_ERR "istallion: shared memory pointer=%x out of " + "range at line=%d(%d), brd=%d\n", + (int) offset, line, __LINE__, brdp->brdnr); + ptr = NULL; + val = 0; + } else { + ptr = brdp->membase + (offset % ONB_EIPAGESIZE); + if (offset < ONB_EIPAGESIZE) + val = ONB_EIENABLE; + else + val = ONB_EIENABLE | 0x40; + } + outb(val, (brdp->iobase + ONB_EICONFR)); + return(ptr); +} + +/*****************************************************************************/ + +static void stli_onbereset(struct stlibrd *brdp) +{ + outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); + udelay(10); + outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); + mdelay(1000); +} + +/*****************************************************************************/ + +/* + * The following routines act on Brumby boards. + */ + +static void stli_bbyinit(struct stlibrd *brdp) +{ + outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR)); + udelay(10); + outb(0, (brdp->iobase + BBY_ATCONFR)); + mdelay(1000); + outb(0x1, brdp->iobase); + mdelay(1); +} + +/*****************************************************************************/ + +static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line) +{ + void __iomem *ptr; + unsigned char val; + + BUG_ON(offset > brdp->memsize); + + ptr = brdp->membase + (offset % BBY_PAGESIZE); + val = (unsigned char) (offset / BBY_PAGESIZE); + outb(val, (brdp->iobase + BBY_ATCONFR)); + return(ptr); +} + +/*****************************************************************************/ + +static void stli_bbyreset(struct stlibrd *brdp) +{ + outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR)); + udelay(10); + outb(0, (brdp->iobase + BBY_ATCONFR)); + mdelay(1000); +} + +/*****************************************************************************/ + +/* + * The following routines act on original old Stallion boards. + */ + +static void stli_stalinit(struct stlibrd *brdp) +{ + outb(0x1, brdp->iobase); + mdelay(1000); +} + +/*****************************************************************************/ + +static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) +{ + BUG_ON(offset > brdp->memsize); + return brdp->membase + (offset % STAL_PAGESIZE); +} + +/*****************************************************************************/ + +static void stli_stalreset(struct stlibrd *brdp) +{ + u32 __iomem *vecp; + + vecp = (u32 __iomem *) (brdp->membase + 0x30); + writel(0xffff0000, vecp); + outb(0, brdp->iobase); + mdelay(1000); +} + +/*****************************************************************************/ + +/* + * Try to find an ECP board and initialize it. This handles only ECP + * board types. + */ + +static int stli_initecp(struct stlibrd *brdp) +{ + cdkecpsig_t sig; + cdkecpsig_t __iomem *sigsp; + unsigned int status, nxtid; + char *name; + int retval, panelnr, nrports; + + if ((brdp->iobase == 0) || (brdp->memaddr == 0)) { + retval = -ENODEV; + goto err; + } + + brdp->iosize = ECP_IOSIZE; + + if (!request_region(brdp->iobase, brdp->iosize, "istallion")) { + retval = -EIO; + goto err; + } + +/* + * Based on the specific board type setup the common vars to access + * and enable shared memory. Set all board specific information now + * as well. + */ + switch (brdp->brdtype) { + case BRD_ECP: + brdp->memsize = ECP_MEMSIZE; + brdp->pagesize = ECP_ATPAGESIZE; + brdp->init = stli_ecpinit; + brdp->enable = stli_ecpenable; + brdp->reenable = stli_ecpenable; + brdp->disable = stli_ecpdisable; + brdp->getmemptr = stli_ecpgetmemptr; + brdp->intr = stli_ecpintr; + brdp->reset = stli_ecpreset; + name = "serial(EC8/64)"; + break; + + case BRD_ECPE: + brdp->memsize = ECP_MEMSIZE; + brdp->pagesize = ECP_EIPAGESIZE; + brdp->init = stli_ecpeiinit; + brdp->enable = stli_ecpeienable; + brdp->reenable = stli_ecpeienable; + brdp->disable = stli_ecpeidisable; + brdp->getmemptr = stli_ecpeigetmemptr; + brdp->intr = stli_ecpintr; + brdp->reset = stli_ecpeireset; + name = "serial(EC8/64-EI)"; + break; + + case BRD_ECPMC: + brdp->memsize = ECP_MEMSIZE; + brdp->pagesize = ECP_MCPAGESIZE; + brdp->init = NULL; + brdp->enable = stli_ecpmcenable; + brdp->reenable = stli_ecpmcenable; + brdp->disable = stli_ecpmcdisable; + brdp->getmemptr = stli_ecpmcgetmemptr; + brdp->intr = stli_ecpintr; + brdp->reset = stli_ecpmcreset; + name = "serial(EC8/64-MCA)"; + break; + + case BRD_ECPPCI: + brdp->memsize = ECP_PCIMEMSIZE; + brdp->pagesize = ECP_PCIPAGESIZE; + brdp->init = stli_ecppciinit; + brdp->enable = NULL; + brdp->reenable = NULL; + brdp->disable = NULL; + brdp->getmemptr = stli_ecppcigetmemptr; + brdp->intr = stli_ecpintr; + brdp->reset = stli_ecppcireset; + name = "serial(EC/RA-PCI)"; + break; + + default: + retval = -EINVAL; + goto err_reg; + } + +/* + * The per-board operations structure is all set up, so now let's go + * and get the board operational. Firstly initialize board configuration + * registers. Set the memory mapping info so we can get at the boards + * shared memory. + */ + EBRDINIT(brdp); + + brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize); + if (brdp->membase == NULL) { + retval = -ENOMEM; + goto err_reg; + } + +/* + * Now that all specific code is set up, enable the shared memory and + * look for the a signature area that will tell us exactly what board + * this is, and what it is connected to it. + */ + EBRDENABLE(brdp); + sigsp = (cdkecpsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR); + memcpy_fromio(&sig, sigsp, sizeof(cdkecpsig_t)); + EBRDDISABLE(brdp); + + if (sig.magic != cpu_to_le32(ECP_MAGIC)) { + retval = -ENODEV; + goto err_unmap; + } + +/* + * Scan through the signature looking at the panels connected to the + * board. Calculate the total number of ports as we go. + */ + for (panelnr = 0, nxtid = 0; (panelnr < STL_MAXPANELS); panelnr++) { + status = sig.panelid[nxtid]; + if ((status & ECH_PNLIDMASK) != nxtid) + break; + + brdp->panelids[panelnr] = status; + nrports = (status & ECH_PNL16PORT) ? 16 : 8; + if ((nrports == 16) && ((status & ECH_PNLXPID) == 0)) + nxtid++; + brdp->panels[panelnr] = nrports; + brdp->nrports += nrports; + nxtid++; + brdp->nrpanels++; + } + + + set_bit(BST_FOUND, &brdp->state); + return 0; +err_unmap: + iounmap(brdp->membase); + brdp->membase = NULL; +err_reg: + release_region(brdp->iobase, brdp->iosize); +err: + return retval; +} + +/*****************************************************************************/ + +/* + * Try to find an ONboard, Brumby or Stallion board and initialize it. + * This handles only these board types. + */ + +static int stli_initonb(struct stlibrd *brdp) +{ + cdkonbsig_t sig; + cdkonbsig_t __iomem *sigsp; + char *name; + int i, retval; + +/* + * Do a basic sanity check on the IO and memory addresses. + */ + if (brdp->iobase == 0 || brdp->memaddr == 0) { + retval = -ENODEV; + goto err; + } + + brdp->iosize = ONB_IOSIZE; + + if (!request_region(brdp->iobase, brdp->iosize, "istallion")) { + retval = -EIO; + goto err; + } + +/* + * Based on the specific board type setup the common vars to access + * and enable shared memory. Set all board specific information now + * as well. + */ + switch (brdp->brdtype) { + case BRD_ONBOARD: + case BRD_ONBOARD2: + brdp->memsize = ONB_MEMSIZE; + brdp->pagesize = ONB_ATPAGESIZE; + brdp->init = stli_onbinit; + brdp->enable = stli_onbenable; + brdp->reenable = stli_onbenable; + brdp->disable = stli_onbdisable; + brdp->getmemptr = stli_onbgetmemptr; + brdp->intr = stli_ecpintr; + brdp->reset = stli_onbreset; + if (brdp->memaddr > 0x100000) + brdp->enabval = ONB_MEMENABHI; + else + brdp->enabval = ONB_MEMENABLO; + name = "serial(ONBoard)"; + break; + + case BRD_ONBOARDE: + brdp->memsize = ONB_EIMEMSIZE; + brdp->pagesize = ONB_EIPAGESIZE; + brdp->init = stli_onbeinit; + brdp->enable = stli_onbeenable; + brdp->reenable = stli_onbeenable; + brdp->disable = stli_onbedisable; + brdp->getmemptr = stli_onbegetmemptr; + brdp->intr = stli_ecpintr; + brdp->reset = stli_onbereset; + name = "serial(ONBoard/E)"; + break; + + case BRD_BRUMBY4: + brdp->memsize = BBY_MEMSIZE; + brdp->pagesize = BBY_PAGESIZE; + brdp->init = stli_bbyinit; + brdp->enable = NULL; + brdp->reenable = NULL; + brdp->disable = NULL; + brdp->getmemptr = stli_bbygetmemptr; + brdp->intr = stli_ecpintr; + brdp->reset = stli_bbyreset; + name = "serial(Brumby)"; + break; + + case BRD_STALLION: + brdp->memsize = STAL_MEMSIZE; + brdp->pagesize = STAL_PAGESIZE; + brdp->init = stli_stalinit; + brdp->enable = NULL; + brdp->reenable = NULL; + brdp->disable = NULL; + brdp->getmemptr = stli_stalgetmemptr; + brdp->intr = stli_ecpintr; + brdp->reset = stli_stalreset; + name = "serial(Stallion)"; + break; + + default: + retval = -EINVAL; + goto err_reg; + } + +/* + * The per-board operations structure is all set up, so now let's go + * and get the board operational. Firstly initialize board configuration + * registers. Set the memory mapping info so we can get at the boards + * shared memory. + */ + EBRDINIT(brdp); + + brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize); + if (brdp->membase == NULL) { + retval = -ENOMEM; + goto err_reg; + } + +/* + * Now that all specific code is set up, enable the shared memory and + * look for the a signature area that will tell us exactly what board + * this is, and how many ports. + */ + EBRDENABLE(brdp); + sigsp = (cdkonbsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR); + memcpy_fromio(&sig, sigsp, sizeof(cdkonbsig_t)); + EBRDDISABLE(brdp); + + if (sig.magic0 != cpu_to_le16(ONB_MAGIC0) || + sig.magic1 != cpu_to_le16(ONB_MAGIC1) || + sig.magic2 != cpu_to_le16(ONB_MAGIC2) || + sig.magic3 != cpu_to_le16(ONB_MAGIC3)) { + retval = -ENODEV; + goto err_unmap; + } + +/* + * Scan through the signature alive mask and calculate how many ports + * there are on this board. + */ + brdp->nrpanels = 1; + if (sig.amask1) { + brdp->nrports = 32; + } else { + for (i = 0; (i < 16); i++) { + if (((sig.amask0 << i) & 0x8000) == 0) + break; + } + brdp->nrports = i; + } + brdp->panels[0] = brdp->nrports; + + + set_bit(BST_FOUND, &brdp->state); + return 0; +err_unmap: + iounmap(brdp->membase); + brdp->membase = NULL; +err_reg: + release_region(brdp->iobase, brdp->iosize); +err: + return retval; +} + +/*****************************************************************************/ + +/* + * Start up a running board. This routine is only called after the + * code has been down loaded to the board and is operational. It will + * read in the memory map, and get the show on the road... + */ + +static int stli_startbrd(struct stlibrd *brdp) +{ + cdkhdr_t __iomem *hdrp; + cdkmem_t __iomem *memp; + cdkasy_t __iomem *ap; + unsigned long flags; + unsigned int portnr, nrdevs, i; + struct stliport *portp; + int rc = 0; + u32 memoff; + + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR); + nrdevs = hdrp->nrdevs; + +#if 0 + printk("%s(%d): CDK version %d.%d.%d --> " + "nrdevs=%d memp=%x hostp=%x slavep=%x\n", + __FILE__, __LINE__, readb(&hdrp->ver_release), readb(&hdrp->ver_modification), + readb(&hdrp->ver_fix), nrdevs, (int) readl(&hdrp->memp), readl(&hdrp->hostp), + readl(&hdrp->slavep)); +#endif + + if (nrdevs < (brdp->nrports + 1)) { + printk(KERN_ERR "istallion: slave failed to allocate memory for " + "all devices, devices=%d\n", nrdevs); + brdp->nrports = nrdevs - 1; + } + brdp->nrdevs = nrdevs; + brdp->hostoffset = hdrp->hostp - CDK_CDKADDR; + brdp->slaveoffset = hdrp->slavep - CDK_CDKADDR; + brdp->bitsize = (nrdevs + 7) / 8; + memoff = readl(&hdrp->memp); + if (memoff > brdp->memsize) { + printk(KERN_ERR "istallion: corrupted shared memory region?\n"); + rc = -EIO; + goto stli_donestartup; + } + memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff); + if (readw(&memp->dtype) != TYP_ASYNCTRL) { + printk(KERN_ERR "istallion: no slave control device found\n"); + goto stli_donestartup; + } + memp++; + +/* + * Cycle through memory allocation of each port. We are guaranteed to + * have all ports inside the first page of slave window, so no need to + * change pages while reading memory map. + */ + for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++, memp++) { + if (readw(&memp->dtype) != TYP_ASYNC) + break; + portp = brdp->ports[portnr]; + if (portp == NULL) + break; + portp->devnr = i; + portp->addr = readl(&memp->offset); + portp->reqbit = (unsigned char) (0x1 << (i * 8 / nrdevs)); + portp->portidx = (unsigned char) (i / 8); + portp->portbit = (unsigned char) (0x1 << (i % 8)); + } + + writeb(0xff, &hdrp->slavereq); + +/* + * For each port setup a local copy of the RX and TX buffer offsets + * and sizes. We do this separate from the above, because we need to + * move the shared memory page... + */ + for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++) { + portp = brdp->ports[portnr]; + if (portp == NULL) + break; + if (portp->addr == 0) + break; + ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr); + if (ap != NULL) { + portp->rxsize = readw(&ap->rxq.size); + portp->txsize = readw(&ap->txq.size); + portp->rxoffset = readl(&ap->rxq.offset); + portp->txoffset = readl(&ap->txq.offset); + } + } + +stli_donestartup: + EBRDDISABLE(brdp); + spin_unlock_irqrestore(&brd_lock, flags); + + if (rc == 0) + set_bit(BST_STARTED, &brdp->state); + + if (! stli_timeron) { + stli_timeron++; + mod_timer(&stli_timerlist, STLI_TIMEOUT); + } + + return rc; +} + +/*****************************************************************************/ + +/* + * Probe and initialize the specified board. + */ + +static int __devinit stli_brdinit(struct stlibrd *brdp) +{ + int retval; + + switch (brdp->brdtype) { + case BRD_ECP: + case BRD_ECPE: + case BRD_ECPMC: + case BRD_ECPPCI: + retval = stli_initecp(brdp); + break; + case BRD_ONBOARD: + case BRD_ONBOARDE: + case BRD_ONBOARD2: + case BRD_BRUMBY4: + case BRD_STALLION: + retval = stli_initonb(brdp); + break; + default: + printk(KERN_ERR "istallion: board=%d is unknown board " + "type=%d\n", brdp->brdnr, brdp->brdtype); + retval = -ENODEV; + } + + if (retval) + return retval; + + stli_initports(brdp); + printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x " + "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype], + brdp->brdnr, brdp->iobase, (int) brdp->memaddr, + brdp->nrpanels, brdp->nrports); + return 0; +} + +#if STLI_EISAPROBE != 0 +/*****************************************************************************/ + +/* + * Probe around trying to find where the EISA boards shared memory + * might be. This is a bit if hack, but it is the best we can do. + */ + +static int stli_eisamemprobe(struct stlibrd *brdp) +{ + cdkecpsig_t ecpsig, __iomem *ecpsigp; + cdkonbsig_t onbsig, __iomem *onbsigp; + int i, foundit; + +/* + * First up we reset the board, to get it into a known state. There + * is only 2 board types here we need to worry about. Don;t use the + * standard board init routine here, it programs up the shared + * memory address, and we don't know it yet... + */ + if (brdp->brdtype == BRD_ECPE) { + outb(0x1, (brdp->iobase + ECP_EIBRDENAB)); + outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); + udelay(10); + outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); + udelay(500); + stli_ecpeienable(brdp); + } else if (brdp->brdtype == BRD_ONBOARDE) { + outb(0x1, (brdp->iobase + ONB_EIBRDENAB)); + outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); + udelay(10); + outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); + mdelay(100); + outb(0x1, brdp->iobase); + mdelay(1); + stli_onbeenable(brdp); + } else { + return -ENODEV; + } + + foundit = 0; + brdp->memsize = ECP_MEMSIZE; + +/* + * Board shared memory is enabled, so now we have a poke around and + * see if we can find it. + */ + for (i = 0; (i < stli_eisamempsize); i++) { + brdp->memaddr = stli_eisamemprobeaddrs[i]; + brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize); + if (brdp->membase == NULL) + continue; + + if (brdp->brdtype == BRD_ECPE) { + ecpsigp = stli_ecpeigetmemptr(brdp, + CDK_SIGADDR, __LINE__); + memcpy_fromio(&ecpsig, ecpsigp, sizeof(cdkecpsig_t)); + if (ecpsig.magic == cpu_to_le32(ECP_MAGIC)) + foundit = 1; + } else { + onbsigp = (cdkonbsig_t __iomem *) stli_onbegetmemptr(brdp, + CDK_SIGADDR, __LINE__); + memcpy_fromio(&onbsig, onbsigp, sizeof(cdkonbsig_t)); + if ((onbsig.magic0 == cpu_to_le16(ONB_MAGIC0)) && + (onbsig.magic1 == cpu_to_le16(ONB_MAGIC1)) && + (onbsig.magic2 == cpu_to_le16(ONB_MAGIC2)) && + (onbsig.magic3 == cpu_to_le16(ONB_MAGIC3))) + foundit = 1; + } + + iounmap(brdp->membase); + if (foundit) + break; + } + +/* + * Regardless of whether we found the shared memory or not we must + * disable the region. After that return success or failure. + */ + if (brdp->brdtype == BRD_ECPE) + stli_ecpeidisable(brdp); + else + stli_onbedisable(brdp); + + if (! foundit) { + brdp->memaddr = 0; + brdp->membase = NULL; + printk(KERN_ERR "istallion: failed to probe shared memory " + "region for %s in EISA slot=%d\n", + stli_brdnames[brdp->brdtype], (brdp->iobase >> 12)); + return -ENODEV; + } + return 0; +} +#endif + +static int stli_getbrdnr(void) +{ + unsigned int i; + + for (i = 0; i < STL_MAXBRDS; i++) { + if (!stli_brds[i]) { + if (i >= stli_nrbrds) + stli_nrbrds = i + 1; + return i; + } + } + return -1; +} + +#if STLI_EISAPROBE != 0 +/*****************************************************************************/ + +/* + * Probe around and try to find any EISA boards in system. The biggest + * problem here is finding out what memory address is associated with + * an EISA board after it is found. The registers of the ECPE and + * ONboardE are not readable - so we can't read them from there. We + * don't have access to the EISA CMOS (or EISA BIOS) so we don't + * actually have any way to find out the real value. The best we can + * do is go probing around in the usual places hoping we can find it. + */ + +static int __init stli_findeisabrds(void) +{ + struct stlibrd *brdp; + unsigned int iobase, eid, i; + int brdnr, found = 0; + +/* + * Firstly check if this is an EISA system. If this is not an EISA system then + * don't bother going any further! + */ + if (EISA_bus) + return 0; + +/* + * Looks like an EISA system, so go searching for EISA boards. + */ + for (iobase = 0x1000; (iobase <= 0xc000); iobase += 0x1000) { + outb(0xff, (iobase + 0xc80)); + eid = inb(iobase + 0xc80); + eid |= inb(iobase + 0xc81) << 8; + if (eid != STL_EISAID) + continue; + +/* + * We have found a board. Need to check if this board was + * statically configured already (just in case!). + */ + for (i = 0; (i < STL_MAXBRDS); i++) { + brdp = stli_brds[i]; + if (brdp == NULL) + continue; + if (brdp->iobase == iobase) + break; + } + if (i < STL_MAXBRDS) + continue; + +/* + * We have found a Stallion board and it is not configured already. + * Allocate a board structure and initialize it. + */ + if ((brdp = stli_allocbrd()) == NULL) + return found ? : -ENOMEM; + brdnr = stli_getbrdnr(); + if (brdnr < 0) + return found ? : -ENOMEM; + brdp->brdnr = (unsigned int)brdnr; + eid = inb(iobase + 0xc82); + if (eid == ECP_EISAID) + brdp->brdtype = BRD_ECPE; + else if (eid == ONB_EISAID) + brdp->brdtype = BRD_ONBOARDE; + else + brdp->brdtype = BRD_UNKNOWN; + brdp->iobase = iobase; + outb(0x1, (iobase + 0xc84)); + if (stli_eisamemprobe(brdp)) + outb(0, (iobase + 0xc84)); + if (stli_brdinit(brdp) < 0) { + kfree(brdp); + continue; + } + + stli_brds[brdp->brdnr] = brdp; + found++; + + for (i = 0; i < brdp->nrports; i++) + tty_register_device(stli_serial, + brdp->brdnr * STL_MAXPORTS + i, NULL); + } + + return found; +} +#else +static inline int stli_findeisabrds(void) { return 0; } +#endif + +/*****************************************************************************/ + +/* + * Find the next available board number that is free. + */ + +/*****************************************************************************/ + +/* + * We have a Stallion board. Allocate a board structure and + * initialize it. Read its IO and MEMORY resources from PCI + * configuration space. + */ + +static int __devinit stli_pciprobe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct stlibrd *brdp; + unsigned int i; + int brdnr, retval = -EIO; + + retval = pci_enable_device(pdev); + if (retval) + goto err; + brdp = stli_allocbrd(); + if (brdp == NULL) { + retval = -ENOMEM; + goto err; + } + mutex_lock(&stli_brdslock); + brdnr = stli_getbrdnr(); + if (brdnr < 0) { + printk(KERN_INFO "istallion: too many boards found, " + "maximum supported %d\n", STL_MAXBRDS); + mutex_unlock(&stli_brdslock); + retval = -EIO; + goto err_fr; + } + brdp->brdnr = (unsigned int)brdnr; + stli_brds[brdp->brdnr] = brdp; + mutex_unlock(&stli_brdslock); + brdp->brdtype = BRD_ECPPCI; +/* + * We have all resources from the board, so lets setup the actual + * board structure now. + */ + brdp->iobase = pci_resource_start(pdev, 3); + brdp->memaddr = pci_resource_start(pdev, 2); + retval = stli_brdinit(brdp); + if (retval) + goto err_null; + + set_bit(BST_PROBED, &brdp->state); + pci_set_drvdata(pdev, brdp); + + EBRDENABLE(brdp); + brdp->enable = NULL; + brdp->disable = NULL; + + for (i = 0; i < brdp->nrports; i++) + tty_register_device(stli_serial, brdp->brdnr * STL_MAXPORTS + i, + &pdev->dev); + + return 0; +err_null: + stli_brds[brdp->brdnr] = NULL; +err_fr: + kfree(brdp); +err: + return retval; +} + +static void __devexit stli_pciremove(struct pci_dev *pdev) +{ + struct stlibrd *brdp = pci_get_drvdata(pdev); + + stli_cleanup_ports(brdp); + + iounmap(brdp->membase); + if (brdp->iosize > 0) + release_region(brdp->iobase, brdp->iosize); + + stli_brds[brdp->brdnr] = NULL; + kfree(brdp); +} + +static struct pci_driver stli_pcidriver = { + .name = "istallion", + .id_table = istallion_pci_tbl, + .probe = stli_pciprobe, + .remove = __devexit_p(stli_pciremove) +}; +/*****************************************************************************/ + +/* + * Allocate a new board structure. Fill out the basic info in it. + */ + +static struct stlibrd *stli_allocbrd(void) +{ + struct stlibrd *brdp; + + brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL); + if (!brdp) { + printk(KERN_ERR "istallion: failed to allocate memory " + "(size=%Zd)\n", sizeof(struct stlibrd)); + return NULL; + } + brdp->magic = STLI_BOARDMAGIC; + return brdp; +} + +/*****************************************************************************/ + +/* + * Scan through all the boards in the configuration and see what we + * can find. + */ + +static int __init stli_initbrds(void) +{ + struct stlibrd *brdp, *nxtbrdp; + struct stlconf conf; + unsigned int i, j, found = 0; + int retval; + + for (stli_nrbrds = 0; stli_nrbrds < ARRAY_SIZE(stli_brdsp); + stli_nrbrds++) { + memset(&conf, 0, sizeof(conf)); + if (stli_parsebrd(&conf, stli_brdsp[stli_nrbrds]) == 0) + continue; + if ((brdp = stli_allocbrd()) == NULL) + continue; + brdp->brdnr = stli_nrbrds; + brdp->brdtype = conf.brdtype; + brdp->iobase = conf.ioaddr1; + brdp->memaddr = conf.memaddr; + if (stli_brdinit(brdp) < 0) { + kfree(brdp); + continue; + } + stli_brds[brdp->brdnr] = brdp; + found++; + + for (i = 0; i < brdp->nrports; i++) + tty_register_device(stli_serial, + brdp->brdnr * STL_MAXPORTS + i, NULL); + } + + retval = stli_findeisabrds(); + if (retval > 0) + found += retval; + +/* + * All found boards are initialized. Now for a little optimization, if + * no boards are sharing the "shared memory" regions then we can just + * leave them all enabled. This is in fact the usual case. + */ + stli_shared = 0; + if (stli_nrbrds > 1) { + for (i = 0; (i < stli_nrbrds); i++) { + brdp = stli_brds[i]; + if (brdp == NULL) + continue; + for (j = i + 1; (j < stli_nrbrds); j++) { + nxtbrdp = stli_brds[j]; + if (nxtbrdp == NULL) + continue; + if ((brdp->membase >= nxtbrdp->membase) && + (brdp->membase <= (nxtbrdp->membase + + nxtbrdp->memsize - 1))) { + stli_shared++; + break; + } + } + } + } + + if (stli_shared == 0) { + for (i = 0; (i < stli_nrbrds); i++) { + brdp = stli_brds[i]; + if (brdp == NULL) + continue; + if (test_bit(BST_FOUND, &brdp->state)) { + EBRDENABLE(brdp); + brdp->enable = NULL; + brdp->disable = NULL; + } + } + } + + retval = pci_register_driver(&stli_pcidriver); + if (retval && found == 0) { + printk(KERN_ERR "Neither isa nor eisa cards found nor pci " + "driver can be registered!\n"); + goto err; + } + + return 0; +err: + return retval; +} + +/*****************************************************************************/ + +/* + * Code to handle an "staliomem" read operation. This device is the + * contents of the board shared memory. It is used for down loading + * the slave image (and debugging :-) + */ + +static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp) +{ + unsigned long flags; + void __iomem *memptr; + struct stlibrd *brdp; + unsigned int brdnr; + int size, n; + void *p; + loff_t off = *offp; + + brdnr = iminor(fp->f_path.dentry->d_inode); + if (brdnr >= stli_nrbrds) + return -ENODEV; + brdp = stli_brds[brdnr]; + if (brdp == NULL) + return -ENODEV; + if (brdp->state == 0) + return -ENODEV; + if (off >= brdp->memsize || off + count < off) + return 0; + + size = min(count, (size_t)(brdp->memsize - off)); + + /* + * Copy the data a page at a time + */ + + p = (void *)__get_free_page(GFP_KERNEL); + if(p == NULL) + return -ENOMEM; + + while (size > 0) { + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + memptr = EBRDGETMEMPTR(brdp, off); + n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize))); + n = min(n, (int)PAGE_SIZE); + memcpy_fromio(p, memptr, n); + EBRDDISABLE(brdp); + spin_unlock_irqrestore(&brd_lock, flags); + if (copy_to_user(buf, p, n)) { + count = -EFAULT; + goto out; + } + off += n; + buf += n; + size -= n; + } +out: + *offp = off; + free_page((unsigned long)p); + return count; +} + +/*****************************************************************************/ + +/* + * Code to handle an "staliomem" write operation. This device is the + * contents of the board shared memory. It is used for down loading + * the slave image (and debugging :-) + * + * FIXME: copy under lock + */ + +static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp) +{ + unsigned long flags; + void __iomem *memptr; + struct stlibrd *brdp; + char __user *chbuf; + unsigned int brdnr; + int size, n; + void *p; + loff_t off = *offp; + + brdnr = iminor(fp->f_path.dentry->d_inode); + + if (brdnr >= stli_nrbrds) + return -ENODEV; + brdp = stli_brds[brdnr]; + if (brdp == NULL) + return -ENODEV; + if (brdp->state == 0) + return -ENODEV; + if (off >= brdp->memsize || off + count < off) + return 0; + + chbuf = (char __user *) buf; + size = min(count, (size_t)(brdp->memsize - off)); + + /* + * Copy the data a page at a time + */ + + p = (void *)__get_free_page(GFP_KERNEL); + if(p == NULL) + return -ENOMEM; + + while (size > 0) { + n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize))); + n = min(n, (int)PAGE_SIZE); + if (copy_from_user(p, chbuf, n)) { + if (count == 0) + count = -EFAULT; + goto out; + } + spin_lock_irqsave(&brd_lock, flags); + EBRDENABLE(brdp); + memptr = EBRDGETMEMPTR(brdp, off); + memcpy_toio(memptr, p, n); + EBRDDISABLE(brdp); + spin_unlock_irqrestore(&brd_lock, flags); + off += n; + chbuf += n; + size -= n; + } +out: + free_page((unsigned long) p); + *offp = off; + return count; +} + +/*****************************************************************************/ + +/* + * Return the board stats structure to user app. + */ + +static int stli_getbrdstats(combrd_t __user *bp) +{ + struct stlibrd *brdp; + unsigned int i; + + if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t))) + return -EFAULT; + if (stli_brdstats.brd >= STL_MAXBRDS) + return -ENODEV; + brdp = stli_brds[stli_brdstats.brd]; + if (brdp == NULL) + return -ENODEV; + + memset(&stli_brdstats, 0, sizeof(combrd_t)); + + stli_brdstats.brd = brdp->brdnr; + stli_brdstats.type = brdp->brdtype; + stli_brdstats.hwid = 0; + stli_brdstats.state = brdp->state; + stli_brdstats.ioaddr = brdp->iobase; + stli_brdstats.memaddr = brdp->memaddr; + stli_brdstats.nrpanels = brdp->nrpanels; + stli_brdstats.nrports = brdp->nrports; + for (i = 0; (i < brdp->nrpanels); i++) { + stli_brdstats.panels[i].panel = i; + stli_brdstats.panels[i].hwid = brdp->panelids[i]; + stli_brdstats.panels[i].nrports = brdp->panels[i]; + } + + if (copy_to_user(bp, &stli_brdstats, sizeof(combrd_t))) + return -EFAULT; + return 0; +} + +/*****************************************************************************/ + +/* + * Resolve the referenced port number into a port struct pointer. + */ + +static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, + unsigned int portnr) +{ + struct stlibrd *brdp; + unsigned int i; + + if (brdnr >= STL_MAXBRDS) + return NULL; + brdp = stli_brds[brdnr]; + if (brdp == NULL) + return NULL; + for (i = 0; (i < panelnr); i++) + portnr += brdp->panels[i]; + if (portnr >= brdp->nrports) + return NULL; + return brdp->ports[portnr]; +} + +/*****************************************************************************/ + +/* + * Return the port stats structure to user app. A NULL port struct + * pointer passed in means that we need to find out from the app + * what port to get stats for (used through board control device). + */ + +static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp) +{ + unsigned long flags; + struct stlibrd *brdp; + int rc; + + memset(&stli_comstats, 0, sizeof(comstats_t)); + + if (portp == NULL) + return -ENODEV; + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) + return -ENODEV; + + mutex_lock(&portp->port.mutex); + if (test_bit(BST_STARTED, &brdp->state)) { + if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS, + &stli_cdkstats, sizeof(asystats_t), 1)) < 0) { + mutex_unlock(&portp->port.mutex); + return rc; + } + } else { + memset(&stli_cdkstats, 0, sizeof(asystats_t)); + } + + stli_comstats.brd = portp->brdnr; + stli_comstats.panel = portp->panelnr; + stli_comstats.port = portp->portnr; + stli_comstats.state = portp->state; + stli_comstats.flags = portp->port.flags; + + spin_lock_irqsave(&brd_lock, flags); + if (tty != NULL) { + if (portp->port.tty == tty) { + stli_comstats.ttystate = tty->flags; + stli_comstats.rxbuffered = -1; + if (tty->termios != NULL) { + stli_comstats.cflags = tty->termios->c_cflag; + stli_comstats.iflags = tty->termios->c_iflag; + stli_comstats.oflags = tty->termios->c_oflag; + stli_comstats.lflags = tty->termios->c_lflag; + } + } + } + spin_unlock_irqrestore(&brd_lock, flags); + + stli_comstats.txtotal = stli_cdkstats.txchars; + stli_comstats.rxtotal = stli_cdkstats.rxchars + stli_cdkstats.ringover; + stli_comstats.txbuffered = stli_cdkstats.txringq; + stli_comstats.rxbuffered += stli_cdkstats.rxringq; + stli_comstats.rxoverrun = stli_cdkstats.overruns; + stli_comstats.rxparity = stli_cdkstats.parity; + stli_comstats.rxframing = stli_cdkstats.framing; + stli_comstats.rxlost = stli_cdkstats.ringover; + stli_comstats.rxbreaks = stli_cdkstats.rxbreaks; + stli_comstats.txbreaks = stli_cdkstats.txbreaks; + stli_comstats.txxon = stli_cdkstats.txstart; + stli_comstats.txxoff = stli_cdkstats.txstop; + stli_comstats.rxxon = stli_cdkstats.rxstart; + stli_comstats.rxxoff = stli_cdkstats.rxstop; + stli_comstats.rxrtsoff = stli_cdkstats.rtscnt / 2; + stli_comstats.rxrtson = stli_cdkstats.rtscnt - stli_comstats.rxrtsoff; + stli_comstats.modem = stli_cdkstats.dcdcnt; + stli_comstats.hwid = stli_cdkstats.hwid; + stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals); + mutex_unlock(&portp->port.mutex); + + return 0; +} + +/*****************************************************************************/ + +/* + * Return the port stats structure to user app. A NULL port struct + * pointer passed in means that we need to find out from the app + * what port to get stats for (used through board control device). + */ + +static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, + comstats_t __user *cp) +{ + struct stlibrd *brdp; + int rc; + + if (!portp) { + if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t))) + return -EFAULT; + portp = stli_getport(stli_comstats.brd, stli_comstats.panel, + stli_comstats.port); + if (!portp) + return -ENODEV; + } + + brdp = stli_brds[portp->brdnr]; + if (!brdp) + return -ENODEV; + + if ((rc = stli_portcmdstats(tty, portp)) < 0) + return rc; + + return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ? + -EFAULT : 0; +} + +/*****************************************************************************/ + +/* + * Clear the port stats structure. We also return it zeroed out... + */ + +static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp) +{ + struct stlibrd *brdp; + int rc; + + if (!portp) { + if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t))) + return -EFAULT; + portp = stli_getport(stli_comstats.brd, stli_comstats.panel, + stli_comstats.port); + if (!portp) + return -ENODEV; + } + + brdp = stli_brds[portp->brdnr]; + if (!brdp) + return -ENODEV; + + mutex_lock(&portp->port.mutex); + + if (test_bit(BST_STARTED, &brdp->state)) { + if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) { + mutex_unlock(&portp->port.mutex); + return rc; + } + } + + memset(&stli_comstats, 0, sizeof(comstats_t)); + stli_comstats.brd = portp->brdnr; + stli_comstats.panel = portp->panelnr; + stli_comstats.port = portp->portnr; + mutex_unlock(&portp->port.mutex); + + if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t))) + return -EFAULT; + return 0; +} + +/*****************************************************************************/ + +/* + * Return the entire driver ports structure to a user app. + */ + +static int stli_getportstruct(struct stliport __user *arg) +{ + struct stliport stli_dummyport; + struct stliport *portp; + + if (copy_from_user(&stli_dummyport, arg, sizeof(struct stliport))) + return -EFAULT; + portp = stli_getport(stli_dummyport.brdnr, stli_dummyport.panelnr, + stli_dummyport.portnr); + if (!portp) + return -ENODEV; + if (copy_to_user(arg, portp, sizeof(struct stliport))) + return -EFAULT; + return 0; +} + +/*****************************************************************************/ + +/* + * Return the entire driver board structure to a user app. + */ + +static int stli_getbrdstruct(struct stlibrd __user *arg) +{ + struct stlibrd stli_dummybrd; + struct stlibrd *brdp; + + if (copy_from_user(&stli_dummybrd, arg, sizeof(struct stlibrd))) + return -EFAULT; + if (stli_dummybrd.brdnr >= STL_MAXBRDS) + return -ENODEV; + brdp = stli_brds[stli_dummybrd.brdnr]; + if (!brdp) + return -ENODEV; + if (copy_to_user(arg, brdp, sizeof(struct stlibrd))) + return -EFAULT; + return 0; +} + +/*****************************************************************************/ + +/* + * The "staliomem" device is also required to do some special operations on + * the board. We need to be able to send an interrupt to the board, + * reset it, and start/stop it. + */ + +static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) +{ + struct stlibrd *brdp; + int brdnr, rc, done; + void __user *argp = (void __user *)arg; + +/* + * First up handle the board independent ioctls. + */ + done = 0; + rc = 0; + + switch (cmd) { + case COM_GETPORTSTATS: + rc = stli_getportstats(NULL, NULL, argp); + done++; + break; + case COM_CLRPORTSTATS: + rc = stli_clrportstats(NULL, argp); + done++; + break; + case COM_GETBRDSTATS: + rc = stli_getbrdstats(argp); + done++; + break; + case COM_READPORT: + rc = stli_getportstruct(argp); + done++; + break; + case COM_READBOARD: + rc = stli_getbrdstruct(argp); + done++; + break; + } + if (done) + return rc; + +/* + * Now handle the board specific ioctls. These all depend on the + * minor number of the device they were called from. + */ + brdnr = iminor(fp->f_dentry->d_inode); + if (brdnr >= STL_MAXBRDS) + return -ENODEV; + brdp = stli_brds[brdnr]; + if (!brdp) + return -ENODEV; + if (brdp->state == 0) + return -ENODEV; + + switch (cmd) { + case STL_BINTR: + EBRDINTR(brdp); + break; + case STL_BSTART: + rc = stli_startbrd(brdp); + break; + case STL_BSTOP: + clear_bit(BST_STARTED, &brdp->state); + break; + case STL_BRESET: + clear_bit(BST_STARTED, &brdp->state); + EBRDRESET(brdp); + if (stli_shared == 0) { + if (brdp->reenable != NULL) + (* brdp->reenable)(brdp); + } + break; + default: + rc = -ENOIOCTLCMD; + break; + } + return rc; +} + +static const struct tty_operations stli_ops = { + .open = stli_open, + .close = stli_close, + .write = stli_write, + .put_char = stli_putchar, + .flush_chars = stli_flushchars, + .write_room = stli_writeroom, + .chars_in_buffer = stli_charsinbuffer, + .ioctl = stli_ioctl, + .set_termios = stli_settermios, + .throttle = stli_throttle, + .unthrottle = stli_unthrottle, + .stop = stli_stop, + .start = stli_start, + .hangup = stli_hangup, + .flush_buffer = stli_flushbuffer, + .break_ctl = stli_breakctl, + .wait_until_sent = stli_waituntilsent, + .send_xchar = stli_sendxchar, + .tiocmget = stli_tiocmget, + .tiocmset = stli_tiocmset, + .proc_fops = &stli_proc_fops, +}; + +static const struct tty_port_operations stli_port_ops = { + .carrier_raised = stli_carrier_raised, + .dtr_rts = stli_dtr_rts, + .activate = stli_activate, + .shutdown = stli_shutdown, +}; + +/*****************************************************************************/ +/* + * Loadable module initialization stuff. + */ + +static void istallion_cleanup_isa(void) +{ + struct stlibrd *brdp; + unsigned int j; + + for (j = 0; (j < stli_nrbrds); j++) { + if ((brdp = stli_brds[j]) == NULL || + test_bit(BST_PROBED, &brdp->state)) + continue; + + stli_cleanup_ports(brdp); + + iounmap(brdp->membase); + if (brdp->iosize > 0) + release_region(brdp->iobase, brdp->iosize); + kfree(brdp); + stli_brds[j] = NULL; + } +} + +static int __init istallion_module_init(void) +{ + unsigned int i; + int retval; + + printk(KERN_INFO "%s: version %s\n", stli_drvtitle, stli_drvversion); + + spin_lock_init(&stli_lock); + spin_lock_init(&brd_lock); + + stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); + if (!stli_txcookbuf) { + printk(KERN_ERR "istallion: failed to allocate memory " + "(size=%d)\n", STLI_TXBUFSIZE); + retval = -ENOMEM; + goto err; + } + + stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); + if (!stli_serial) { + retval = -ENOMEM; + goto err_free; + } + + stli_serial->owner = THIS_MODULE; + stli_serial->driver_name = stli_drvname; + stli_serial->name = stli_serialname; + stli_serial->major = STL_SERIALMAJOR; + stli_serial->minor_start = 0; + stli_serial->type = TTY_DRIVER_TYPE_SERIAL; + stli_serial->subtype = SERIAL_TYPE_NORMAL; + stli_serial->init_termios = stli_deftermios; + stli_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(stli_serial, &stli_ops); + + retval = tty_register_driver(stli_serial); + if (retval) { + printk(KERN_ERR "istallion: failed to register serial driver\n"); + goto err_ttyput; + } + + retval = stli_initbrds(); + if (retval) + goto err_ttyunr; + +/* + * Set up a character driver for the shared memory region. We need this + * to down load the slave code image. Also it is a useful debugging tool. + */ + retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem); + if (retval) { + printk(KERN_ERR "istallion: failed to register serial memory " + "device\n"); + goto err_deinit; + } + + istallion_class = class_create(THIS_MODULE, "staliomem"); + for (i = 0; i < 4; i++) + device_create(istallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i), + NULL, "staliomem%d", i); + + return 0; +err_deinit: + pci_unregister_driver(&stli_pcidriver); + istallion_cleanup_isa(); +err_ttyunr: + tty_unregister_driver(stli_serial); +err_ttyput: + put_tty_driver(stli_serial); +err_free: + kfree(stli_txcookbuf); +err: + return retval; +} + +/*****************************************************************************/ + +static void __exit istallion_module_exit(void) +{ + unsigned int j; + + printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle, + stli_drvversion); + + if (stli_timeron) { + stli_timeron = 0; + del_timer_sync(&stli_timerlist); + } + + unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"); + + for (j = 0; j < 4; j++) + device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, j)); + class_destroy(istallion_class); + + pci_unregister_driver(&stli_pcidriver); + istallion_cleanup_isa(); + + tty_unregister_driver(stli_serial); + put_tty_driver(stli_serial); + + kfree(stli_txcookbuf); +} + +module_init(istallion_module_init); +module_exit(istallion_module_exit); diff --git a/drivers/staging/tty/riscom8.c b/drivers/staging/tty/riscom8.c new file mode 100644 index 000000000000..602643a40b4b --- /dev/null +++ b/drivers/staging/tty/riscom8.c @@ -0,0 +1,1560 @@ +/* + * linux/drivers/char/riscom.c -- RISCom/8 multiport serial driver. + * + * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) + * + * This code is loosely based on the Linux serial driver, written by + * Linus Torvalds, Theodore T'so and others. The RISCom/8 card + * programming info was obtained from various drivers for other OSes + * (FreeBSD, ISC, etc), but no source code from those drivers were + * directly included in this driver. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Revision 1.1 + * + * ChangeLog: + * Arnaldo Carvalho de Melo - 27-Jun-2001 + * - get rid of check_region and several cleanups + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "riscom8.h" +#include "riscom8_reg.h" + +/* Am I paranoid or not ? ;-) */ +#define RISCOM_PARANOIA_CHECK + +/* + * Crazy InteliCom/8 boards sometimes have swapped CTS & DSR signals. + * You can slightly speed up things by #undefing the following option, + * if you are REALLY sure that your board is correct one. + */ + +#define RISCOM_BRAIN_DAMAGED_CTS + +/* + * The following defines are mostly for testing purposes. But if you need + * some nice reporting in your syslog, you can define them also. + */ +#undef RC_REPORT_FIFO +#undef RC_REPORT_OVERRUN + + +#define RISCOM_LEGAL_FLAGS \ + (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ + ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ + ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) + +static struct tty_driver *riscom_driver; + +static DEFINE_SPINLOCK(riscom_lock); + +static struct riscom_board rc_board[RC_NBOARD] = { + { + .base = RC_IOBASE1, + }, + { + .base = RC_IOBASE2, + }, + { + .base = RC_IOBASE3, + }, + { + .base = RC_IOBASE4, + }, +}; + +static struct riscom_port rc_port[RC_NBOARD * RC_NPORT]; + +/* RISCom/8 I/O ports addresses (without address translation) */ +static unsigned short rc_ioport[] = { +#if 1 + 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, +#else + 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10, + 0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62, + 0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101 +#endif +}; +#define RC_NIOPORT ARRAY_SIZE(rc_ioport) + + +static int rc_paranoia_check(struct riscom_port const *port, + char *name, const char *routine) +{ +#ifdef RISCOM_PARANOIA_CHECK + static const char badmagic[] = KERN_INFO + "rc: Warning: bad riscom port magic number for device %s in %s\n"; + static const char badinfo[] = KERN_INFO + "rc: Warning: null riscom port for device %s in %s\n"; + + if (!port) { + printk(badinfo, name, routine); + return 1; + } + if (port->magic != RISCOM8_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * + * Service functions for RISCom/8 driver. + * + */ + +/* Get board number from pointer */ +static inline int board_No(struct riscom_board const *bp) +{ + return bp - rc_board; +} + +/* Get port number from pointer */ +static inline int port_No(struct riscom_port const *port) +{ + return RC_PORT(port - rc_port); +} + +/* Get pointer to board from pointer to port */ +static inline struct riscom_board *port_Board(struct riscom_port const *port) +{ + return &rc_board[RC_BOARD(port - rc_port)]; +} + +/* Input Byte from CL CD180 register */ +static inline unsigned char rc_in(struct riscom_board const *bp, + unsigned short reg) +{ + return inb(bp->base + RC_TO_ISA(reg)); +} + +/* Output Byte to CL CD180 register */ +static inline void rc_out(struct riscom_board const *bp, unsigned short reg, + unsigned char val) +{ + outb(val, bp->base + RC_TO_ISA(reg)); +} + +/* Wait for Channel Command Register ready */ +static void rc_wait_CCR(struct riscom_board const *bp) +{ + unsigned long delay; + + /* FIXME: need something more descriptive then 100000 :) */ + for (delay = 100000; delay; delay--) + if (!rc_in(bp, CD180_CCR)) + return; + + printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp)); +} + +/* + * RISCom/8 probe functions. + */ + +static int rc_request_io_range(struct riscom_board * const bp) +{ + int i; + + for (i = 0; i < RC_NIOPORT; i++) + if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1, + "RISCom/8")) { + goto out_release; + } + return 0; +out_release: + printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n", + board_No(bp), bp->base); + while (--i >= 0) + release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1); + return 1; +} + +static void rc_release_io_range(struct riscom_board * const bp) +{ + int i; + + for (i = 0; i < RC_NIOPORT; i++) + release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1); +} + +/* Reset and setup CD180 chip */ +static void __init rc_init_CD180(struct riscom_board const *bp) +{ + unsigned long flags; + + spin_lock_irqsave(&riscom_lock, flags); + + rc_out(bp, RC_CTOUT, 0); /* Clear timeout */ + rc_wait_CCR(bp); /* Wait for CCR ready */ + rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */ + spin_unlock_irqrestore(&riscom_lock, flags); + msleep(50); /* Delay 0.05 sec */ + spin_lock_irqsave(&riscom_lock, flags); + rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */ + rc_out(bp, CD180_GICR, 0); /* Clear all bits */ + rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */ + rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for tx intr */ + rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for rx intr */ + + /* Setting up prescaler. We need 4 ticks per 1 ms */ + rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8); + rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff); + + spin_unlock_irqrestore(&riscom_lock, flags); +} + +/* Main probing routine, also sets irq. */ +static int __init rc_probe(struct riscom_board *bp) +{ + unsigned char val1, val2; + int irqs = 0; + int retries; + + bp->irq = 0; + + if (rc_request_io_range(bp)) + return 1; + + /* Are the I/O ports here ? */ + rc_out(bp, CD180_PPRL, 0x5a); + outb(0xff, 0x80); + val1 = rc_in(bp, CD180_PPRL); + rc_out(bp, CD180_PPRL, 0xa5); + outb(0x00, 0x80); + val2 = rc_in(bp, CD180_PPRL); + + if ((val1 != 0x5a) || (val2 != 0xa5)) { + printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n", + board_No(bp), bp->base); + goto out_release; + } + + /* It's time to find IRQ for this board */ + for (retries = 0; retries < 5 && irqs <= 0; retries++) { + irqs = probe_irq_on(); + rc_init_CD180(bp); /* Reset CD180 chip */ + rc_out(bp, CD180_CAR, 2); /* Select port 2 */ + rc_wait_CCR(bp); + rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */ + rc_out(bp, CD180_IER, IER_TXRDY);/* Enable tx empty intr */ + msleep(50); + irqs = probe_irq_off(irqs); + val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */ + val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */ + rc_init_CD180(bp); /* Reset CD180 again */ + + if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX))) { + printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not " + "found.\n", board_No(bp), bp->base); + goto out_release; + } + } + + if (irqs <= 0) { + printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board " + "at 0x%03x.\n", board_No(bp), bp->base); + goto out_release; + } + bp->irq = irqs; + bp->flags |= RC_BOARD_PRESENT; + + printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at " + "0x%03x, IRQ %d.\n", + board_No(bp), + (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A', /* Board revision */ + bp->base, bp->irq); + + return 0; +out_release: + rc_release_io_range(bp); + return 1; +} + +/* + * + * Interrupt processing routines. + * + */ + +static struct riscom_port *rc_get_port(struct riscom_board const *bp, + unsigned char const *what) +{ + unsigned char channel; + struct riscom_port *port; + + channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF; + if (channel < CD180_NCH) { + port = &rc_port[board_No(bp) * RC_NPORT + channel]; + if (port->port.flags & ASYNC_INITIALIZED) + return port; + } + printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n", + board_No(bp), what, channel); + return NULL; +} + +static void rc_receive_exc(struct riscom_board const *bp) +{ + struct riscom_port *port; + struct tty_struct *tty; + unsigned char status; + unsigned char ch, flag; + + port = rc_get_port(bp, "Receive"); + if (port == NULL) + return; + + tty = tty_port_tty_get(&port->port); + +#ifdef RC_REPORT_OVERRUN + status = rc_in(bp, CD180_RCSR); + if (status & RCSR_OE) + port->overrun++; + status &= port->mark_mask; +#else + status = rc_in(bp, CD180_RCSR) & port->mark_mask; +#endif + ch = rc_in(bp, CD180_RDR); + if (!status) + goto out; + if (status & RCSR_TOUT) { + printk(KERN_WARNING "rc%d: port %d: Receiver timeout. " + "Hardware problems ?\n", + board_No(bp), port_No(port)); + goto out; + + } else if (status & RCSR_BREAK) { + printk(KERN_INFO "rc%d: port %d: Handling break...\n", + board_No(bp), port_No(port)); + flag = TTY_BREAK; + if (tty && (port->port.flags & ASYNC_SAK)) + do_SAK(tty); + + } else if (status & RCSR_PE) + flag = TTY_PARITY; + + else if (status & RCSR_FE) + flag = TTY_FRAME; + + else if (status & RCSR_OE) + flag = TTY_OVERRUN; + else + flag = TTY_NORMAL; + + if (tty) { + tty_insert_flip_char(tty, ch, flag); + tty_flip_buffer_push(tty); + } +out: + tty_kref_put(tty); +} + +static void rc_receive(struct riscom_board const *bp) +{ + struct riscom_port *port; + struct tty_struct *tty; + unsigned char count; + + port = rc_get_port(bp, "Receive"); + if (port == NULL) + return; + + tty = tty_port_tty_get(&port->port); + + count = rc_in(bp, CD180_RDCR); + +#ifdef RC_REPORT_FIFO + port->hits[count > 8 ? 9 : count]++; +#endif + + while (count--) { + u8 ch = rc_in(bp, CD180_RDR); + if (tty) + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } + if (tty) { + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } +} + +static void rc_transmit(struct riscom_board const *bp) +{ + struct riscom_port *port; + struct tty_struct *tty; + unsigned char count; + + port = rc_get_port(bp, "Transmit"); + if (port == NULL) + return; + + tty = tty_port_tty_get(&port->port); + + if (port->IER & IER_TXEMPTY) { + /* FIFO drained */ + rc_out(bp, CD180_CAR, port_No(port)); + port->IER &= ~IER_TXEMPTY; + rc_out(bp, CD180_IER, port->IER); + goto out; + } + + if ((port->xmit_cnt <= 0 && !port->break_length) + || (tty && (tty->stopped || tty->hw_stopped))) { + rc_out(bp, CD180_CAR, port_No(port)); + port->IER &= ~IER_TXRDY; + rc_out(bp, CD180_IER, port->IER); + goto out; + } + + if (port->break_length) { + if (port->break_length > 0) { + if (port->COR2 & COR2_ETC) { + rc_out(bp, CD180_TDR, CD180_C_ESC); + rc_out(bp, CD180_TDR, CD180_C_SBRK); + port->COR2 &= ~COR2_ETC; + } + count = min_t(int, port->break_length, 0xff); + rc_out(bp, CD180_TDR, CD180_C_ESC); + rc_out(bp, CD180_TDR, CD180_C_DELAY); + rc_out(bp, CD180_TDR, count); + port->break_length -= count; + if (port->break_length == 0) + port->break_length--; + } else { + rc_out(bp, CD180_TDR, CD180_C_ESC); + rc_out(bp, CD180_TDR, CD180_C_EBRK); + rc_out(bp, CD180_COR2, port->COR2); + rc_wait_CCR(bp); + rc_out(bp, CD180_CCR, CCR_CORCHG2); + port->break_length = 0; + } + goto out; + } + + count = CD180_NFIFO; + do { + rc_out(bp, CD180_TDR, port->port.xmit_buf[port->xmit_tail++]); + port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); + if (--port->xmit_cnt <= 0) + break; + } while (--count > 0); + + if (port->xmit_cnt <= 0) { + rc_out(bp, CD180_CAR, port_No(port)); + port->IER &= ~IER_TXRDY; + rc_out(bp, CD180_IER, port->IER); + } + if (tty && port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); +out: + tty_kref_put(tty); +} + +static void rc_check_modem(struct riscom_board const *bp) +{ + struct riscom_port *port; + struct tty_struct *tty; + unsigned char mcr; + + port = rc_get_port(bp, "Modem"); + if (port == NULL) + return; + + tty = tty_port_tty_get(&port->port); + + mcr = rc_in(bp, CD180_MCR); + if (mcr & MCR_CDCHG) { + if (rc_in(bp, CD180_MSVR) & MSVR_CD) + wake_up_interruptible(&port->port.open_wait); + else if (tty) + tty_hangup(tty); + } + +#ifdef RISCOM_BRAIN_DAMAGED_CTS + if (mcr & MCR_CTSCHG) { + if (rc_in(bp, CD180_MSVR) & MSVR_CTS) { + port->IER |= IER_TXRDY; + if (tty) { + tty->hw_stopped = 0; + if (port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); + } + } else { + if (tty) + tty->hw_stopped = 1; + port->IER &= ~IER_TXRDY; + } + rc_out(bp, CD180_IER, port->IER); + } + if (mcr & MCR_DSRCHG) { + if (rc_in(bp, CD180_MSVR) & MSVR_DSR) { + port->IER |= IER_TXRDY; + if (tty) { + tty->hw_stopped = 0; + if (port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); + } + } else { + if (tty) + tty->hw_stopped = 1; + port->IER &= ~IER_TXRDY; + } + rc_out(bp, CD180_IER, port->IER); + } +#endif /* RISCOM_BRAIN_DAMAGED_CTS */ + + /* Clear change bits */ + rc_out(bp, CD180_MCR, 0); + tty_kref_put(tty); +} + +/* The main interrupt processing routine */ +static irqreturn_t rc_interrupt(int dummy, void *dev_id) +{ + unsigned char status; + unsigned char ack; + struct riscom_board *bp = dev_id; + unsigned long loop = 0; + int handled = 0; + + if (!(bp->flags & RC_BOARD_ACTIVE)) + return IRQ_NONE; + + while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) & + (RC_BSR_TOUT | RC_BSR_TINT | + RC_BSR_MINT | RC_BSR_RINT))) { + handled = 1; + if (status & RC_BSR_TOUT) + printk(KERN_WARNING "rc%d: Got timeout. Hardware " + "error?\n", board_No(bp)); + else if (status & RC_BSR_RINT) { + ack = rc_in(bp, RC_ACK_RINT); + if (ack == (RC_ID | GIVR_IT_RCV)) + rc_receive(bp); + else if (ack == (RC_ID | GIVR_IT_REXC)) + rc_receive_exc(bp); + else + printk(KERN_WARNING "rc%d: Bad receive ack " + "0x%02x.\n", + board_No(bp), ack); + } else if (status & RC_BSR_TINT) { + ack = rc_in(bp, RC_ACK_TINT); + if (ack == (RC_ID | GIVR_IT_TX)) + rc_transmit(bp); + else + printk(KERN_WARNING "rc%d: Bad transmit ack " + "0x%02x.\n", + board_No(bp), ack); + } else /* if (status & RC_BSR_MINT) */ { + ack = rc_in(bp, RC_ACK_MINT); + if (ack == (RC_ID | GIVR_IT_MODEM)) + rc_check_modem(bp); + else + printk(KERN_WARNING "rc%d: Bad modem ack " + "0x%02x.\n", + board_No(bp), ack); + } + rc_out(bp, CD180_EOIR, 0); /* Mark end of interrupt */ + rc_out(bp, RC_CTOUT, 0); /* Clear timeout flag */ + } + return IRQ_RETVAL(handled); +} + +/* + * Routines for open & close processing. + */ + +/* Called with disabled interrupts */ +static int rc_setup_board(struct riscom_board *bp) +{ + int error; + + if (bp->flags & RC_BOARD_ACTIVE) + return 0; + + error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED, + "RISCom/8", bp); + if (error) + return error; + + rc_out(bp, RC_CTOUT, 0); /* Just in case */ + bp->DTR = ~0; + rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */ + + bp->flags |= RC_BOARD_ACTIVE; + + return 0; +} + +/* Called with disabled interrupts */ +static void rc_shutdown_board(struct riscom_board *bp) +{ + if (!(bp->flags & RC_BOARD_ACTIVE)) + return; + + bp->flags &= ~RC_BOARD_ACTIVE; + + free_irq(bp->irq, NULL); + + bp->DTR = ~0; + rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */ + +} + +/* + * Setting up port characteristics. + * Must be called with disabled interrupts + */ +static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp, + struct riscom_port *port) +{ + unsigned long baud; + long tmp; + unsigned char cor1 = 0, cor3 = 0; + unsigned char mcor1 = 0, mcor2 = 0; + + port->IER = 0; + port->COR2 = 0; + port->MSVR = MSVR_RTS; + + baud = tty_get_baud_rate(tty); + + /* Select port on the board */ + rc_out(bp, CD180_CAR, port_No(port)); + + if (!baud) { + /* Drop DTR & exit */ + bp->DTR |= (1u << port_No(port)); + rc_out(bp, RC_DTR, bp->DTR); + return; + } else { + /* Set DTR on */ + bp->DTR &= ~(1u << port_No(port)); + rc_out(bp, RC_DTR, bp->DTR); + } + + /* + * Now we must calculate some speed depended things + */ + + /* Set baud rate for port */ + tmp = (((RC_OSCFREQ + baud/2) / baud + + CD180_TPC/2) / CD180_TPC); + + rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff); + rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff); + rc_out(bp, CD180_RBPRL, tmp & 0xff); + rc_out(bp, CD180_TBPRL, tmp & 0xff); + + baud = (baud + 5) / 10; /* Estimated CPS */ + + /* Two timer ticks seems enough to wakeup something like SLIP driver */ + tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; + port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? + SERIAL_XMIT_SIZE - 1 : tmp); + + /* Receiver timeout will be transmission time for 1.5 chars */ + tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud; + tmp = (tmp > 0xff) ? 0xff : tmp; + rc_out(bp, CD180_RTPR, tmp); + + switch (C_CSIZE(tty)) { + case CS5: + cor1 |= COR1_5BITS; + break; + case CS6: + cor1 |= COR1_6BITS; + break; + case CS7: + cor1 |= COR1_7BITS; + break; + case CS8: + cor1 |= COR1_8BITS; + break; + } + if (C_CSTOPB(tty)) + cor1 |= COR1_2SB; + + cor1 |= COR1_IGNORE; + if (C_PARENB(tty)) { + cor1 |= COR1_NORMPAR; + if (C_PARODD(tty)) + cor1 |= COR1_ODDP; + if (I_INPCK(tty)) + cor1 &= ~COR1_IGNORE; + } + /* Set marking of some errors */ + port->mark_mask = RCSR_OE | RCSR_TOUT; + if (I_INPCK(tty)) + port->mark_mask |= RCSR_FE | RCSR_PE; + if (I_BRKINT(tty) || I_PARMRK(tty)) + port->mark_mask |= RCSR_BREAK; + if (I_IGNPAR(tty)) + port->mark_mask &= ~(RCSR_FE | RCSR_PE); + if (I_IGNBRK(tty)) { + port->mark_mask &= ~RCSR_BREAK; + if (I_IGNPAR(tty)) + /* Real raw mode. Ignore all */ + port->mark_mask &= ~RCSR_OE; + } + /* Enable Hardware Flow Control */ + if (C_CRTSCTS(tty)) { +#ifdef RISCOM_BRAIN_DAMAGED_CTS + port->IER |= IER_DSR | IER_CTS; + mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; + mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; + tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & + (MSVR_CTS|MSVR_DSR)); +#else + port->COR2 |= COR2_CTSAE; +#endif + } + /* Enable Software Flow Control. FIXME: I'm not sure about this */ + /* Some people reported that it works, but I still doubt */ + if (I_IXON(tty)) { + port->COR2 |= COR2_TXIBE; + cor3 |= (COR3_FCT | COR3_SCDE); + if (I_IXANY(tty)) + port->COR2 |= COR2_IXM; + rc_out(bp, CD180_SCHR1, START_CHAR(tty)); + rc_out(bp, CD180_SCHR2, STOP_CHAR(tty)); + rc_out(bp, CD180_SCHR3, START_CHAR(tty)); + rc_out(bp, CD180_SCHR4, STOP_CHAR(tty)); + } + if (!C_CLOCAL(tty)) { + /* Enable CD check */ + port->IER |= IER_CD; + mcor1 |= MCOR1_CDZD; + mcor2 |= MCOR2_CDOD; + } + + if (C_CREAD(tty)) + /* Enable receiver */ + port->IER |= IER_RXD; + + /* Set input FIFO size (1-8 bytes) */ + cor3 |= RISCOM_RXFIFO; + /* Setting up CD180 channel registers */ + rc_out(bp, CD180_COR1, cor1); + rc_out(bp, CD180_COR2, port->COR2); + rc_out(bp, CD180_COR3, cor3); + /* Make CD180 know about registers change */ + rc_wait_CCR(bp); + rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); + /* Setting up modem option registers */ + rc_out(bp, CD180_MCOR1, mcor1); + rc_out(bp, CD180_MCOR2, mcor2); + /* Enable CD180 transmitter & receiver */ + rc_wait_CCR(bp); + rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN); + /* Enable interrupts */ + rc_out(bp, CD180_IER, port->IER); + /* And finally set RTS on */ + rc_out(bp, CD180_MSVR, port->MSVR); +} + +/* Must be called with interrupts enabled */ +static int rc_activate_port(struct tty_port *port, struct tty_struct *tty) +{ + struct riscom_port *rp = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(rp); + unsigned long flags; + + if (tty_port_alloc_xmit_buf(port) < 0) + return -ENOMEM; + + spin_lock_irqsave(&riscom_lock, flags); + + clear_bit(TTY_IO_ERROR, &tty->flags); + bp->count++; + rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0; + rc_change_speed(tty, bp, rp); + spin_unlock_irqrestore(&riscom_lock, flags); + return 0; +} + +/* Must be called with interrupts disabled */ +static void rc_shutdown_port(struct tty_struct *tty, + struct riscom_board *bp, struct riscom_port *port) +{ +#ifdef RC_REPORT_OVERRUN + printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n", + board_No(bp), port_No(port), port->overrun); +#endif +#ifdef RC_REPORT_FIFO + { + int i; + + printk(KERN_INFO "rc%d: port %d: FIFO hits [ ", + board_No(bp), port_No(port)); + for (i = 0; i < 10; i++) + printk("%ld ", port->hits[i]); + printk("].\n"); + } +#endif + tty_port_free_xmit_buf(&port->port); + + /* Select port */ + rc_out(bp, CD180_CAR, port_No(port)); + /* Reset port */ + rc_wait_CCR(bp); + rc_out(bp, CD180_CCR, CCR_SOFTRESET); + /* Disable all interrupts from this port */ + port->IER = 0; + rc_out(bp, CD180_IER, port->IER); + + set_bit(TTY_IO_ERROR, &tty->flags); + + if (--bp->count < 0) { + printk(KERN_INFO "rc%d: rc_shutdown_port: " + "bad board count: %d\n", + board_No(bp), bp->count); + bp->count = 0; + } + /* + * If this is the last opened port on the board + * shutdown whole board + */ + if (!bp->count) + rc_shutdown_board(bp); +} + +static int carrier_raised(struct tty_port *port) +{ + struct riscom_port *p = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(p); + unsigned long flags; + int CD; + + spin_lock_irqsave(&riscom_lock, flags); + rc_out(bp, CD180_CAR, port_No(p)); + CD = rc_in(bp, CD180_MSVR) & MSVR_CD; + rc_out(bp, CD180_MSVR, MSVR_RTS); + bp->DTR &= ~(1u << port_No(p)); + rc_out(bp, RC_DTR, bp->DTR); + spin_unlock_irqrestore(&riscom_lock, flags); + return CD; +} + +static void dtr_rts(struct tty_port *port, int onoff) +{ + struct riscom_port *p = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(p); + unsigned long flags; + + spin_lock_irqsave(&riscom_lock, flags); + bp->DTR &= ~(1u << port_No(p)); + if (onoff == 0) + bp->DTR |= (1u << port_No(p)); + rc_out(bp, RC_DTR, bp->DTR); + spin_unlock_irqrestore(&riscom_lock, flags); +} + +static int rc_open(struct tty_struct *tty, struct file *filp) +{ + int board; + int error; + struct riscom_port *port; + struct riscom_board *bp; + + board = RC_BOARD(tty->index); + if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT)) + return -ENODEV; + + bp = &rc_board[board]; + port = rc_port + board * RC_NPORT + RC_PORT(tty->index); + if (rc_paranoia_check(port, tty->name, "rc_open")) + return -ENODEV; + + error = rc_setup_board(bp); + if (error) + return error; + + tty->driver_data = port; + return tty_port_open(&port->port, tty, filp); +} + +static void rc_flush_buffer(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, "rc_flush_buffer")) + return; + + spin_lock_irqsave(&riscom_lock, flags); + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + spin_unlock_irqrestore(&riscom_lock, flags); + + tty_wakeup(tty); +} + +static void rc_close_port(struct tty_port *port) +{ + unsigned long flags; + struct riscom_port *rp = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(rp); + unsigned long timeout; + + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + + spin_lock_irqsave(&riscom_lock, flags); + rp->IER &= ~IER_RXD; + + rp->IER &= ~IER_TXRDY; + rp->IER |= IER_TXEMPTY; + rc_out(bp, CD180_CAR, port_No(rp)); + rc_out(bp, CD180_IER, rp->IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (rp->IER & IER_TXEMPTY) { + spin_unlock_irqrestore(&riscom_lock, flags); + msleep_interruptible(jiffies_to_msecs(rp->timeout)); + spin_lock_irqsave(&riscom_lock, flags); + if (time_after(jiffies, timeout)) + break; + } + rc_shutdown_port(port->tty, bp, rp); + spin_unlock_irqrestore(&riscom_lock, flags); +} + +static void rc_close(struct tty_struct *tty, struct file *filp) +{ + struct riscom_port *port = tty->driver_data; + + if (!port || rc_paranoia_check(port, tty->name, "close")) + return; + tty_port_close(&port->port, tty, filp); +} + +static int rc_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct riscom_port *port = tty->driver_data; + struct riscom_board *bp; + int c, total = 0; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, "rc_write")) + return 0; + + bp = port_Board(port); + + while (1) { + spin_lock_irqsave(&riscom_lock, flags); + + c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, + SERIAL_XMIT_SIZE - port->xmit_head)); + if (c <= 0) + break; /* lock continues to be held */ + + memcpy(port->port.xmit_buf + port->xmit_head, buf, c); + port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + port->xmit_cnt += c; + + spin_unlock_irqrestore(&riscom_lock, flags); + + buf += c; + count -= c; + total += c; + } + + if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && + !(port->IER & IER_TXRDY)) { + port->IER |= IER_TXRDY; + rc_out(bp, CD180_CAR, port_No(port)); + rc_out(bp, CD180_IER, port->IER); + } + + spin_unlock_irqrestore(&riscom_lock, flags); + + return total; +} + +static int rc_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct riscom_port *port = tty->driver_data; + unsigned long flags; + int ret = 0; + + if (rc_paranoia_check(port, tty->name, "rc_put_char")) + return 0; + + spin_lock_irqsave(&riscom_lock, flags); + + if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) + goto out; + + port->port.xmit_buf[port->xmit_head++] = ch; + port->xmit_head &= SERIAL_XMIT_SIZE - 1; + port->xmit_cnt++; + ret = 1; + +out: + spin_unlock_irqrestore(&riscom_lock, flags); + return ret; +} + +static void rc_flush_chars(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, "rc_flush_chars")) + return; + + if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped) + return; + + spin_lock_irqsave(&riscom_lock, flags); + + port->IER |= IER_TXRDY; + rc_out(port_Board(port), CD180_CAR, port_No(port)); + rc_out(port_Board(port), CD180_IER, port->IER); + + spin_unlock_irqrestore(&riscom_lock, flags); +} + +static int rc_write_room(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + int ret; + + if (rc_paranoia_check(port, tty->name, "rc_write_room")) + return 0; + + ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} + +static int rc_chars_in_buffer(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + + if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer")) + return 0; + + return port->xmit_cnt; +} + +static int rc_tiocmget(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + struct riscom_board *bp; + unsigned char status; + unsigned int result; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, __func__)) + return -ENODEV; + + bp = port_Board(port); + + spin_lock_irqsave(&riscom_lock, flags); + + rc_out(bp, CD180_CAR, port_No(port)); + status = rc_in(bp, CD180_MSVR); + result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG; + + spin_unlock_irqrestore(&riscom_lock, flags); + + result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0) + | ((status & MSVR_DTR) ? TIOCM_DTR : 0) + | ((status & MSVR_CD) ? TIOCM_CAR : 0) + | ((status & MSVR_DSR) ? TIOCM_DSR : 0) + | ((status & MSVR_CTS) ? TIOCM_CTS : 0); + return result; +} + +static int rc_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct riscom_port *port = tty->driver_data; + unsigned long flags; + struct riscom_board *bp; + + if (rc_paranoia_check(port, tty->name, __func__)) + return -ENODEV; + + bp = port_Board(port); + + spin_lock_irqsave(&riscom_lock, flags); + + if (set & TIOCM_RTS) + port->MSVR |= MSVR_RTS; + if (set & TIOCM_DTR) + bp->DTR &= ~(1u << port_No(port)); + + if (clear & TIOCM_RTS) + port->MSVR &= ~MSVR_RTS; + if (clear & TIOCM_DTR) + bp->DTR |= (1u << port_No(port)); + + rc_out(bp, CD180_CAR, port_No(port)); + rc_out(bp, CD180_MSVR, port->MSVR); + rc_out(bp, RC_DTR, bp->DTR); + + spin_unlock_irqrestore(&riscom_lock, flags); + + return 0; +} + +static int rc_send_break(struct tty_struct *tty, int length) +{ + struct riscom_port *port = tty->driver_data; + struct riscom_board *bp = port_Board(port); + unsigned long flags; + + if (length == 0 || length == -1) + return -EOPNOTSUPP; + + spin_lock_irqsave(&riscom_lock, flags); + + port->break_length = RISCOM_TPS / HZ * length; + port->COR2 |= COR2_ETC; + port->IER |= IER_TXRDY; + rc_out(bp, CD180_CAR, port_No(port)); + rc_out(bp, CD180_COR2, port->COR2); + rc_out(bp, CD180_IER, port->IER); + rc_wait_CCR(bp); + rc_out(bp, CD180_CCR, CCR_CORCHG2); + rc_wait_CCR(bp); + + spin_unlock_irqrestore(&riscom_lock, flags); + return 0; +} + +static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port, + struct serial_struct __user *newinfo) +{ + struct serial_struct tmp; + struct riscom_board *bp = port_Board(port); + int change_speed; + + if (copy_from_user(&tmp, newinfo, sizeof(tmp))) + return -EFAULT; + + mutex_lock(&port->port.mutex); + change_speed = ((port->port.flags & ASYNC_SPD_MASK) != + (tmp.flags & ASYNC_SPD_MASK)); + + if (!capable(CAP_SYS_ADMIN)) { + if ((tmp.close_delay != port->port.close_delay) || + (tmp.closing_wait != port->port.closing_wait) || + ((tmp.flags & ~ASYNC_USR_MASK) != + (port->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&port->port.mutex); + return -EPERM; + } + port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | + (tmp.flags & ASYNC_USR_MASK)); + } else { + port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | + (tmp.flags & ASYNC_FLAGS)); + port->port.close_delay = tmp.close_delay; + port->port.closing_wait = tmp.closing_wait; + } + if (change_speed) { + unsigned long flags; + + spin_lock_irqsave(&riscom_lock, flags); + rc_change_speed(tty, bp, port); + spin_unlock_irqrestore(&riscom_lock, flags); + } + mutex_unlock(&port->port.mutex); + return 0; +} + +static int rc_get_serial_info(struct riscom_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + struct riscom_board *bp = port_Board(port); + + memset(&tmp, 0, sizeof(tmp)); + tmp.type = PORT_CIRRUS; + tmp.line = port - rc_port; + + mutex_lock(&port->port.mutex); + tmp.port = bp->base; + tmp.irq = bp->irq; + tmp.flags = port->port.flags; + tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC; + tmp.close_delay = port->port.close_delay * HZ/100; + tmp.closing_wait = port->port.closing_wait * HZ/100; + mutex_unlock(&port->port.mutex); + tmp.xmit_fifo_size = CD180_NFIFO; + return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0; +} + +static int rc_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct riscom_port *port = tty->driver_data; + void __user *argp = (void __user *)arg; + int retval; + + if (rc_paranoia_check(port, tty->name, "rc_ioctl")) + return -ENODEV; + + switch (cmd) { + case TIOCGSERIAL: + retval = rc_get_serial_info(port, argp); + break; + case TIOCSSERIAL: + retval = rc_set_serial_info(tty, port, argp); + break; + default: + retval = -ENOIOCTLCMD; + } + return retval; +} + +static void rc_throttle(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + struct riscom_board *bp; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, "rc_throttle")) + return; + bp = port_Board(port); + + spin_lock_irqsave(&riscom_lock, flags); + port->MSVR &= ~MSVR_RTS; + rc_out(bp, CD180_CAR, port_No(port)); + if (I_IXOFF(tty)) { + rc_wait_CCR(bp); + rc_out(bp, CD180_CCR, CCR_SSCH2); + rc_wait_CCR(bp); + } + rc_out(bp, CD180_MSVR, port->MSVR); + spin_unlock_irqrestore(&riscom_lock, flags); +} + +static void rc_unthrottle(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + struct riscom_board *bp; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, "rc_unthrottle")) + return; + bp = port_Board(port); + + spin_lock_irqsave(&riscom_lock, flags); + port->MSVR |= MSVR_RTS; + rc_out(bp, CD180_CAR, port_No(port)); + if (I_IXOFF(tty)) { + rc_wait_CCR(bp); + rc_out(bp, CD180_CCR, CCR_SSCH1); + rc_wait_CCR(bp); + } + rc_out(bp, CD180_MSVR, port->MSVR); + spin_unlock_irqrestore(&riscom_lock, flags); +} + +static void rc_stop(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + struct riscom_board *bp; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, "rc_stop")) + return; + + bp = port_Board(port); + + spin_lock_irqsave(&riscom_lock, flags); + port->IER &= ~IER_TXRDY; + rc_out(bp, CD180_CAR, port_No(port)); + rc_out(bp, CD180_IER, port->IER); + spin_unlock_irqrestore(&riscom_lock, flags); +} + +static void rc_start(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + struct riscom_board *bp; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, "rc_start")) + return; + + bp = port_Board(port); + + spin_lock_irqsave(&riscom_lock, flags); + + if (port->xmit_cnt && port->port.xmit_buf && !(port->IER & IER_TXRDY)) { + port->IER |= IER_TXRDY; + rc_out(bp, CD180_CAR, port_No(port)); + rc_out(bp, CD180_IER, port->IER); + } + spin_unlock_irqrestore(&riscom_lock, flags); +} + +static void rc_hangup(struct tty_struct *tty) +{ + struct riscom_port *port = tty->driver_data; + + if (rc_paranoia_check(port, tty->name, "rc_hangup")) + return; + + tty_port_hangup(&port->port); +} + +static void rc_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct riscom_port *port = tty->driver_data; + unsigned long flags; + + if (rc_paranoia_check(port, tty->name, "rc_set_termios")) + return; + + spin_lock_irqsave(&riscom_lock, flags); + rc_change_speed(tty, port_Board(port), port); + spin_unlock_irqrestore(&riscom_lock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rc_start(tty); + } +} + +static const struct tty_operations riscom_ops = { + .open = rc_open, + .close = rc_close, + .write = rc_write, + .put_char = rc_put_char, + .flush_chars = rc_flush_chars, + .write_room = rc_write_room, + .chars_in_buffer = rc_chars_in_buffer, + .flush_buffer = rc_flush_buffer, + .ioctl = rc_ioctl, + .throttle = rc_throttle, + .unthrottle = rc_unthrottle, + .set_termios = rc_set_termios, + .stop = rc_stop, + .start = rc_start, + .hangup = rc_hangup, + .tiocmget = rc_tiocmget, + .tiocmset = rc_tiocmset, + .break_ctl = rc_send_break, +}; + +static const struct tty_port_operations riscom_port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, + .shutdown = rc_close_port, + .activate = rc_activate_port, +}; + + +static int __init rc_init_drivers(void) +{ + int error; + int i; + + riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT); + if (!riscom_driver) + return -ENOMEM; + + riscom_driver->owner = THIS_MODULE; + riscom_driver->name = "ttyL"; + riscom_driver->major = RISCOM8_NORMAL_MAJOR; + riscom_driver->type = TTY_DRIVER_TYPE_SERIAL; + riscom_driver->subtype = SERIAL_TYPE_NORMAL; + riscom_driver->init_termios = tty_std_termios; + riscom_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + riscom_driver->init_termios.c_ispeed = 9600; + riscom_driver->init_termios.c_ospeed = 9600; + riscom_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK; + tty_set_operations(riscom_driver, &riscom_ops); + error = tty_register_driver(riscom_driver); + if (error != 0) { + put_tty_driver(riscom_driver); + printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, " + "error = %d\n", error); + return 1; + } + memset(rc_port, 0, sizeof(rc_port)); + for (i = 0; i < RC_NPORT * RC_NBOARD; i++) { + tty_port_init(&rc_port[i].port); + rc_port[i].port.ops = &riscom_port_ops; + rc_port[i].magic = RISCOM8_MAGIC; + } + return 0; +} + +static void rc_release_drivers(void) +{ + tty_unregister_driver(riscom_driver); + put_tty_driver(riscom_driver); +} + +#ifndef MODULE +/* + * Called at boot time. + * + * You can specify IO base for up to RC_NBOARD cards, + * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt. + * Note that there will be no probing at default + * addresses in this case. + * + */ +static int __init riscom8_setup(char *str) +{ + int ints[RC_NBOARD]; + int i; + + str = get_options(str, ARRAY_SIZE(ints), ints); + + for (i = 0; i < RC_NBOARD; i++) { + if (i < ints[0]) + rc_board[i].base = ints[i+1]; + else + rc_board[i].base = 0; + } + return 1; +} + +__setup("riscom8=", riscom8_setup); +#endif + +static char banner[] __initdata = + KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin " + "1994-1996.\n"; +static char no_boards_msg[] __initdata = + KERN_INFO "rc: No RISCom/8 boards detected.\n"; + +/* + * This routine must be called by kernel at boot time + */ +static int __init riscom8_init(void) +{ + int i; + int found = 0; + + printk(banner); + + if (rc_init_drivers()) + return -EIO; + + for (i = 0; i < RC_NBOARD; i++) + if (rc_board[i].base && !rc_probe(&rc_board[i])) + found++; + if (!found) { + rc_release_drivers(); + printk(no_boards_msg); + return -EIO; + } + return 0; +} + +#ifdef MODULE +static int iobase; +static int iobase1; +static int iobase2; +static int iobase3; +module_param(iobase, int, 0); +module_param(iobase1, int, 0); +module_param(iobase2, int, 0); +module_param(iobase3, int, 0); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(RISCOM8_NORMAL_MAJOR); +#endif /* MODULE */ + +/* + * You can setup up to 4 boards (current value of RC_NBOARD) + * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter. + * + */ +static int __init riscom8_init_module(void) +{ +#ifdef MODULE + int i; + + if (iobase || iobase1 || iobase2 || iobase3) { + for (i = 0; i < RC_NBOARD; i++) + rc_board[i].base = 0; + } + + if (iobase) + rc_board[0].base = iobase; + if (iobase1) + rc_board[1].base = iobase1; + if (iobase2) + rc_board[2].base = iobase2; + if (iobase3) + rc_board[3].base = iobase3; +#endif /* MODULE */ + + return riscom8_init(); +} + +static void __exit riscom8_exit_module(void) +{ + int i; + + rc_release_drivers(); + for (i = 0; i < RC_NBOARD; i++) + if (rc_board[i].flags & RC_BOARD_PRESENT) + rc_release_io_range(&rc_board[i]); + +} + +module_init(riscom8_init_module); +module_exit(riscom8_exit_module); diff --git a/drivers/staging/tty/riscom8.h b/drivers/staging/tty/riscom8.h new file mode 100644 index 000000000000..c9876b3f9714 --- /dev/null +++ b/drivers/staging/tty/riscom8.h @@ -0,0 +1,91 @@ +/* + * linux/drivers/char/riscom8.h -- RISCom/8 multiport serial driver. + * + * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) + * + * This code is loosely based on the Linux serial driver, written by + * Linus Torvalds, Theodore T'so and others. The RISCom/8 card + * programming info was obtained from various drivers for other OSes + * (FreeBSD, ISC, etc), but no source code from those drivers were + * directly included in this driver. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_RISCOM8_H +#define __LINUX_RISCOM8_H + +#include + +#ifdef __KERNEL__ + +#define RC_NBOARD 4 +/* NOTE: RISCom decoder recognizes 16 addresses... */ +#define RC_NPORT 8 +#define RC_BOARD(line) (((line) >> 3) & 0x07) +#define RC_PORT(line) ((line) & (RC_NPORT - 1)) + +/* Ticks per sec. Used for setting receiver timeout and break length */ +#define RISCOM_TPS 4000 + +/* Yeah, after heavy testing I decided it must be 6. + * Sure, You can change it if needed. + */ +#define RISCOM_RXFIFO 6 /* Max. receiver FIFO size (1-8) */ + +#define RISCOM8_MAGIC 0x0907 + +#define RC_IOBASE1 0x220 +#define RC_IOBASE2 0x240 +#define RC_IOBASE3 0x250 +#define RC_IOBASE4 0x260 + +struct riscom_board { + unsigned long flags; + unsigned short base; + unsigned char irq; + signed char count; + unsigned char DTR; +}; + +#define RC_BOARD_PRESENT 0x00000001 +#define RC_BOARD_ACTIVE 0x00000002 + +struct riscom_port { + int magic; + struct tty_port port; + int baud_base; + int timeout; + int custom_divisor; + int xmit_head; + int xmit_tail; + int xmit_cnt; + short wakeup_chars; + short break_length; + unsigned char mark_mask; + unsigned char IER; + unsigned char MSVR; + unsigned char COR2; +#ifdef RC_REPORT_OVERRUN + unsigned long overrun; +#endif +#ifdef RC_REPORT_FIFO + unsigned long hits[10]; +#endif +}; + +#endif /* __KERNEL__ */ +#endif /* __LINUX_RISCOM8_H */ diff --git a/drivers/staging/tty/riscom8_reg.h b/drivers/staging/tty/riscom8_reg.h new file mode 100644 index 000000000000..a32475ed0d18 --- /dev/null +++ b/drivers/staging/tty/riscom8_reg.h @@ -0,0 +1,254 @@ +/* + * linux/drivers/char/riscom8_reg.h -- RISCom/8 multiport serial driver. + */ + +/* + * Definitions for RISCom/8 Async Mux card by SDL Communications, Inc. + */ + +/* + * Address mapping between Cirrus Logic CD180 chip internal registers + * and ISA port addresses: + * + * CL-CD180 A6 A5 A4 A3 A2 A1 A0 + * ISA A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 + */ +#define RC_TO_ISA(r) ((((r)&0x07)<<1) | (((r)&~0x07)<<7)) + + +/* RISCom/8 On-Board Registers (assuming address translation) */ + +#define RC_RI 0x100 /* Ring Indicator Register (R/O) */ +#define RC_DTR 0x100 /* DTR Register (W/O) */ +#define RC_BSR 0x101 /* Board Status Register (R/O) */ +#define RC_CTOUT 0x101 /* Clear Timeout (W/O) */ + + +/* Board Status Register */ + +#define RC_BSR_TOUT 0x08 /* Hardware Timeout */ +#define RC_BSR_RINT 0x04 /* Receiver Interrupt */ +#define RC_BSR_TINT 0x02 /* Transmitter Interrupt */ +#define RC_BSR_MINT 0x01 /* Modem Ctl Interrupt */ + + +/* On-board oscillator frequency (in Hz) */ +#define RC_OSCFREQ 9830400 + +/* Values of choice for Interrupt ACKs */ +#define RC_ACK_MINT 0x81 /* goes to PILR1 */ +#define RC_ACK_RINT 0x82 /* goes to PILR3 */ +#define RC_ACK_TINT 0x84 /* goes to PILR2 */ + +/* Chip ID (sorry, only one chip now) */ +#define RC_ID 0x10 + +/* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */ + +#define CD180_NCH 8 /* Total number of channels */ +#define CD180_TPC 16 /* Ticks per character */ +#define CD180_NFIFO 8 /* TX FIFO size */ + + +/* Global registers */ + +#define CD180_GIVR 0x40 /* Global Interrupt Vector Register */ +#define CD180_GICR 0x41 /* Global Interrupting Channel Register */ +#define CD180_PILR1 0x61 /* Priority Interrupt Level Register 1 */ +#define CD180_PILR2 0x62 /* Priority Interrupt Level Register 2 */ +#define CD180_PILR3 0x63 /* Priority Interrupt Level Register 3 */ +#define CD180_CAR 0x64 /* Channel Access Register */ +#define CD180_GFRCR 0x6b /* Global Firmware Revision Code Register */ +#define CD180_PPRH 0x70 /* Prescaler Period Register High */ +#define CD180_PPRL 0x71 /* Prescaler Period Register Low */ +#define CD180_RDR 0x78 /* Receiver Data Register */ +#define CD180_RCSR 0x7a /* Receiver Character Status Register */ +#define CD180_TDR 0x7b /* Transmit Data Register */ +#define CD180_EOIR 0x7f /* End of Interrupt Register */ + + +/* Channel Registers */ + +#define CD180_CCR 0x01 /* Channel Command Register */ +#define CD180_IER 0x02 /* Interrupt Enable Register */ +#define CD180_COR1 0x03 /* Channel Option Register 1 */ +#define CD180_COR2 0x04 /* Channel Option Register 2 */ +#define CD180_COR3 0x05 /* Channel Option Register 3 */ +#define CD180_CCSR 0x06 /* Channel Control Status Register */ +#define CD180_RDCR 0x07 /* Receive Data Count Register */ +#define CD180_SCHR1 0x09 /* Special Character Register 1 */ +#define CD180_SCHR2 0x0a /* Special Character Register 2 */ +#define CD180_SCHR3 0x0b /* Special Character Register 3 */ +#define CD180_SCHR4 0x0c /* Special Character Register 4 */ +#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */ +#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */ +#define CD180_MCR 0x12 /* Modem Change Register */ +#define CD180_RTPR 0x18 /* Receive Timeout Period Register */ +#define CD180_MSVR 0x28 /* Modem Signal Value Register */ +#define CD180_RBPRH 0x31 /* Receive Baud Rate Period Register High */ +#define CD180_RBPRL 0x32 /* Receive Baud Rate Period Register Low */ +#define CD180_TBPRH 0x39 /* Transmit Baud Rate Period Register High */ +#define CD180_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */ + + +/* Global Interrupt Vector Register (R/W) */ + +#define GIVR_ITMASK 0x07 /* Interrupt type mask */ +#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */ +#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */ +#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */ +#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */ + + +/* Global Interrupt Channel Register (R/W) */ + +#define GICR_CHAN 0x1c /* Channel Number Mask */ +#define GICR_CHAN_OFF 2 /* Channel Number Offset */ + + +/* Channel Address Register (R/W) */ + +#define CAR_CHAN 0x07 /* Channel Number Mask */ +#define CAR_A7 0x08 /* A7 Address Extension (unused) */ + + +/* Receive Character Status Register (R/O) */ + +#define RCSR_TOUT 0x80 /* Rx Timeout */ +#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ +#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ +#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ +#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ +#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ +#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ +#define RCSR_BREAK 0x08 /* Break has been detected */ +#define RCSR_PE 0x04 /* Parity Error */ +#define RCSR_FE 0x02 /* Frame Error */ +#define RCSR_OE 0x01 /* Overrun Error */ + + +/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ + +#define CCR_HARDRESET 0x81 /* Reset the chip */ + +#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ + +#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ +#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ +#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ + +#define CCR_SSCH1 0x21 /* Send Special Character 1 */ + +#define CCR_SSCH2 0x22 /* Send Special Character 2 */ + +#define CCR_SSCH3 0x23 /* Send Special Character 3 */ + +#define CCR_SSCH4 0x24 /* Send Special Character 4 */ + +#define CCR_TXEN 0x18 /* Enable Transmitter */ +#define CCR_RXEN 0x12 /* Enable Receiver */ + +#define CCR_TXDIS 0x14 /* Disable Transmitter */ +#define CCR_RXDIS 0x11 /* Disable Receiver */ + + +/* Interrupt Enable Register (R/W) */ + +#define IER_DSR 0x80 /* Enable interrupt on DSR change */ +#define IER_CD 0x40 /* Enable interrupt on CD change */ +#define IER_CTS 0x20 /* Enable interrupt on CTS change */ +#define IER_RXD 0x10 /* Enable interrupt on Receive Data */ +#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ +#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ +#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ +#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ + + +/* Channel Option Register 1 (R/W) */ + +#define COR1_ODDP 0x80 /* Odd Parity */ +#define COR1_PARMODE 0x60 /* Parity Mode mask */ +#define COR1_NOPAR 0x00 /* No Parity */ +#define COR1_FORCEPAR 0x20 /* Force Parity */ +#define COR1_NORMPAR 0x40 /* Normal Parity */ +#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ +#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ +#define COR1_1SB 0x00 /* 1 Stop Bit */ +#define COR1_15SB 0x04 /* 1.5 Stop Bits */ +#define COR1_2SB 0x08 /* 2 Stop Bits */ +#define COR1_CHARLEN 0x03 /* Character Length */ +#define COR1_5BITS 0x00 /* 5 bits */ +#define COR1_6BITS 0x01 /* 6 bits */ +#define COR1_7BITS 0x02 /* 7 bits */ +#define COR1_8BITS 0x03 /* 8 bits */ + + +/* Channel Option Register 2 (R/W) */ + +#define COR2_IXM 0x80 /* Implied XON mode */ +#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ +#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ +#define COR2_LLM 0x10 /* Local Loopback Mode */ +#define COR2_RLM 0x08 /* Remote Loopback Mode */ +#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ +#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ +#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ + + +/* Channel Option Register 3 (R/W) */ + +#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ +#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ +#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ +#define COR3_SCDE 0x10 /* Special Character Detection Enable */ +#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ + + +/* Channel Control Status Register (R/O) */ + +#define CCSR_RXEN 0x80 /* Receiver Enabled */ +#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ +#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ +#define CCSR_TXEN 0x08 /* Transmitter Enabled */ +#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ +#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ + + +/* Modem Change Option Register 1 (R/W) */ + +#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ +#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ +#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ +#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ +#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ + + +/* Modem Change Option Register 2 (R/W) */ + +#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ +#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ +#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ + + +/* Modem Change Register (R/W) */ + +#define MCR_DSRCHG 0x80 /* DSR Changed */ +#define MCR_CDCHG 0x40 /* CD Changed */ +#define MCR_CTSCHG 0x20 /* CTS Changed */ + + +/* Modem Signal Value Register (R/W) */ + +#define MSVR_DSR 0x80 /* Current state of DSR input */ +#define MSVR_CD 0x40 /* Current state of CD input */ +#define MSVR_CTS 0x20 /* Current state of CTS input */ +#define MSVR_DTR 0x02 /* Current state of DTR output */ +#define MSVR_RTS 0x01 /* Current state of RTS output */ + + +/* Escape characters */ + +#define CD180_C_ESC 0x00 /* Escape character */ +#define CD180_C_SBRK 0x81 /* Start sending BREAK */ +#define CD180_C_DELAY 0x82 /* Delay output */ +#define CD180_C_EBRK 0x83 /* Stop sending BREAK */ diff --git a/drivers/staging/tty/serial167.c b/drivers/staging/tty/serial167.c new file mode 100644 index 000000000000..674af6933978 --- /dev/null +++ b/drivers/staging/tty/serial167.c @@ -0,0 +1,2489 @@ +/* + * linux/drivers/char/serial167.c + * + * Driver for MVME166/7 board serial ports, which are via a CD2401. + * Based very much on cyclades.c. + * + * MVME166/7 work by Richard Hirst [richard@sleepie.demon.co.uk] + * + * ============================================================== + * + * static char rcsid[] = + * "$Revision: 1.36.1.4 $$Date: 1995/03/29 06:14:14 $"; + * + * linux/kernel/cyclades.c + * + * Maintained by Marcio Saito (cyclades@netcom.com) and + * Randolph Bentson (bentson@grieg.seaslug.org) + * + * Much of the design and some of the code came from serial.c + * which was copyright (C) 1991, 1992 Linus Torvalds. It was + * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, + * and then fixed as suggested by Michael K. Johnson 12/12/92. + * + * This version does not support shared irq's. + * + * $Log: cyclades.c,v $ + * Revision 1.36.1.4 1995/03/29 06:14:14 bentson + * disambiguate between Cyclom-16Y and Cyclom-32Ye; + * + * Changes: + * + * 200 lines of changes record removed - RGH 11-10-95, starting work on + * converting this to drive serial ports on mvme166 (cd2401). + * + * Arnaldo Carvalho de Melo - 2000/08/25 + * - get rid of verify_area + * - use get_user to access memory from userspace in set_threshold, + * set_default_threshold and set_timeout + * - don't use the panic function in serial167_init + * - do resource release on failure on serial167_init + * - include missing restore_flags in mvme167_serial_console_setup + * + * Kars de Jong - 2004/09/06 + * - replace bottom half handler with task queue handler + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#define SERIAL_PARANOIA_CHECK +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_THROTTLE +#undef SERIAL_DEBUG_OTHER +#undef SERIAL_DEBUG_IO +#undef SERIAL_DEBUG_COUNT +#undef SERIAL_DEBUG_DTR +#undef CYCLOM_16Y_HACK +#define CYCLOM_ENABLE_MONITORING + +#define WAKEUP_CHARS 256 + +#define STD_COM_FLAGS (0) + +static struct tty_driver *cy_serial_driver; +extern int serial_console; +static struct cyclades_port *serial_console_info = NULL; +static unsigned int serial_console_cflag = 0; +u_char initial_console_speed; + +/* Base address of cd2401 chip on mvme166/7 */ + +#define BASE_ADDR (0xfff45000) +#define pcc2chip ((volatile u_char *)0xfff42000) +#define PccSCCMICR 0x1d +#define PccSCCTICR 0x1e +#define PccSCCRICR 0x1f +#define PccTPIACKR 0x25 +#define PccRPIACKR 0x27 +#define PccIMLR 0x3f + +/* This is the per-port data structure */ +struct cyclades_port cy_port[] = { + /* CARD# */ + {-1}, /* ttyS0 */ + {-1}, /* ttyS1 */ + {-1}, /* ttyS2 */ + {-1}, /* ttyS3 */ +}; + +#define NR_PORTS ARRAY_SIZE(cy_port) + +/* + * This is used to look up the divisor speeds and the timeouts + * We're normally limited to 15 distinct baud rates. The extra + * are accessed via settings in info->flags. + * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, + * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, + * HI VHI + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, + 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, + 0 +}; + +#if 0 +static char baud_co[] = { /* 25 MHz clock option table */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, + 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static char baud_bpr[] = { /* 25 MHz baud rate period table */ + 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, + 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 +}; +#endif + +/* I think 166 brd clocks 2401 at 20MHz.... */ + +/* These values are written directly to tcor, and >> 5 for writing to rcor */ +static u_char baud_co[] = { /* 20 MHz clock option table */ + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40, + 0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +/* These values written directly to tbpr/rbpr */ +static u_char baud_bpr[] = { /* 20 MHz baud rate period table */ + 0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81, + 0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10 +}; + +static u_char baud_cor4[] = { /* receive threshold */ + 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07 +}; + +static void shutdown(struct cyclades_port *); +static int startup(struct cyclades_port *); +static void cy_throttle(struct tty_struct *); +static void cy_unthrottle(struct tty_struct *); +static void config_setup(struct cyclades_port *); +#ifdef CYCLOM_SHOW_STATUS +static void show_status(int); +#endif + +/* + * I have my own version of udelay(), as it is needed when initialising + * the chip, before the delay loop has been calibrated. Should probably + * reference one of the vmechip2 or pccchip2 counter for an accurate + * delay, but this wild guess will do for now. + */ + +void my_udelay(long us) +{ + u_char x; + volatile u_char *p = &x; + int i; + + while (us--) + for (i = 100; i; i--) + x |= *p; +} + +static inline int serial_paranoia_check(struct cyclades_port *info, char *name, + const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + if (!info) { + printk("Warning: null cyclades_port for (%s) in %s\n", name, + routine); + return 1; + } + + if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) { + printk("Warning: cyclades_port out of range for (%s) in %s\n", + name, routine); + return 1; + } + + if (info->magic != CYCLADES_MAGIC) { + printk("Warning: bad magic number for serial struct (%s) in " + "%s\n", name, routine); + return 1; + } +#endif + return 0; +} /* serial_paranoia_check */ + +#if 0 +/* The following diagnostic routines allow the driver to spew + information on the screen, even (especially!) during interrupts. + */ +void SP(char *data) +{ + unsigned long flags; + local_irq_save(flags); + printk(KERN_EMERG "%s", data); + local_irq_restore(flags); +} + +char scrn[2]; +void CP(char data) +{ + unsigned long flags; + local_irq_save(flags); + scrn[0] = data; + printk(KERN_EMERG "%c", scrn); + local_irq_restore(flags); +} /* CP */ + +void CP1(int data) +{ + (data < 10) ? CP(data + '0') : CP(data + 'A' - 10); +} /* CP1 */ +void CP2(int data) +{ + CP1((data >> 4) & 0x0f); + CP1(data & 0x0f); +} /* CP2 */ +void CP4(int data) +{ + CP2((data >> 8) & 0xff); + CP2(data & 0xff); +} /* CP4 */ +void CP8(long data) +{ + CP4((data >> 16) & 0xffff); + CP4(data & 0xffff); +} /* CP8 */ +#endif + +/* This routine waits up to 1000 micro-seconds for the previous + command to the Cirrus chip to complete and then issues the + new command. An error is returned if the previous command + didn't finish within the time limit. + */ +u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd) +{ + unsigned long flags; + volatile int i; + + local_irq_save(flags); + /* Check to see that the previous command has completed */ + for (i = 0; i < 100; i++) { + if (base_addr[CyCCR] == 0) { + break; + } + my_udelay(10L); + } + /* if the CCR never cleared, the previous command + didn't finish within the "reasonable time" */ + if (i == 10) { + local_irq_restore(flags); + return (-1); + } + + /* Issue the new command */ + base_addr[CyCCR] = cmd; + local_irq_restore(flags); + return (0); +} /* write_cy_cmd */ + +/* cy_start and cy_stop provide software output flow control as a + function of XON/XOFF, software CTS, and other such stuff. */ + +static void cy_stop(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + unsigned long flags; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_stop %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_stop")) + return; + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char) (channel); /* index channel */ + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + local_irq_restore(flags); +} /* cy_stop */ + +static void cy_start(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + unsigned long flags; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_start %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_start")) + return; + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char) (channel); + base_addr[CyIER] |= CyTxMpty; + local_irq_restore(flags); +} /* cy_start */ + +/* The real interrupt service routines are called + whenever the card wants its hand held--chars + received, out buffer empty, modem change, etc. + */ +static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) +{ + struct tty_struct *tty; + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + unsigned char err, rfoc; + int channel; + char data; + + /* determine the channel and change to that context */ + channel = (u_short) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + + if ((err = base_addr[CyRISR]) & CyTIMEOUT) { + /* This is a receive timeout interrupt, ignore it */ + base_addr[CyREOIR] = CyNOTRANS; + return IRQ_HANDLED; + } + + /* Read a byte of data if there is any - assume the error + * is associated with this character */ + + if ((rfoc = base_addr[CyRFOC]) != 0) + data = base_addr[CyRDR]; + else + data = 0; + + /* if there is nowhere to put the data, discard it */ + if (info->tty == 0) { + base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; + return IRQ_HANDLED; + } else { /* there is an open port for this data */ + tty = info->tty; + if (err & info->ignore_status_mask) { + base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; + return IRQ_HANDLED; + } + if (tty_buffer_request_room(tty, 1) != 0) { + if (err & info->read_status_mask) { + if (err & CyBREAK) { + tty_insert_flip_char(tty, data, + TTY_BREAK); + if (info->flags & ASYNC_SAK) { + do_SAK(tty); + } + } else if (err & CyFRAME) { + tty_insert_flip_char(tty, data, + TTY_FRAME); + } else if (err & CyPARITY) { + tty_insert_flip_char(tty, data, + TTY_PARITY); + } else if (err & CyOVERRUN) { + tty_insert_flip_char(tty, 0, + TTY_OVERRUN); + /* + If the flip buffer itself is + overflowing, we still lose + the next incoming character. + */ + if (tty_buffer_request_room(tty, 1) != + 0) { + tty_insert_flip_char(tty, data, + TTY_FRAME); + } + /* These two conditions may imply */ + /* a normal read should be done. */ + /* else if(data & CyTIMEOUT) */ + /* else if(data & CySPECHAR) */ + } else { + tty_insert_flip_char(tty, 0, + TTY_NORMAL); + } + } else { + tty_insert_flip_char(tty, data, TTY_NORMAL); + } + } else { + /* there was a software buffer overrun + and nothing could be done about it!!! */ + } + } + tty_schedule_flip(tty); + /* end of service */ + base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; + return IRQ_HANDLED; +} /* cy_rxerr_interrupt */ + +static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id) +{ + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + int mdm_change; + int mdm_status; + + /* determine the channel and change to that context */ + channel = (u_short) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + + mdm_change = base_addr[CyMISR]; + mdm_status = base_addr[CyMSVR1]; + + if (info->tty == 0) { /* nowhere to put the data, ignore it */ + ; + } else { + if ((mdm_change & CyDCD) + && (info->flags & ASYNC_CHECK_CD)) { + if (mdm_status & CyDCD) { +/* CP('!'); */ + wake_up_interruptible(&info->open_wait); + } else { +/* CP('@'); */ + tty_hangup(info->tty); + wake_up_interruptible(&info->open_wait); + info->flags &= ~ASYNC_NORMAL_ACTIVE; + } + } + if ((mdm_change & CyCTS) + && (info->flags & ASYNC_CTS_FLOW)) { + if (info->tty->stopped) { + if (mdm_status & CyCTS) { + /* !!! cy_start isn't used because... */ + info->tty->stopped = 0; + base_addr[CyIER] |= CyTxMpty; + tty_wakeup(info->tty); + } + } else { + if (!(mdm_status & CyCTS)) { + /* !!! cy_stop isn't used because... */ + info->tty->stopped = 1; + base_addr[CyIER] &= + ~(CyTxMpty | CyTxRdy); + } + } + } + if (mdm_status & CyDSR) { + } + } + base_addr[CyMEOIR] = 0; + return IRQ_HANDLED; +} /* cy_modem_interrupt */ + +static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id) +{ + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + int char_count, saved_cnt; + int outch; + + /* determine the channel and change to that context */ + channel = (u_short) (base_addr[CyLICR] >> 2); + + /* validate the port number (as configured and open) */ + if ((channel < 0) || (NR_PORTS <= channel)) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + base_addr[CyTEOIR] = CyNOTRANS; + return IRQ_HANDLED; + } + info = &cy_port[channel]; + info->last_active = jiffies; + if (info->tty == 0) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + base_addr[CyTEOIR] = CyNOTRANS; + return IRQ_HANDLED; + } + + /* load the on-chip space available for outbound data */ + saved_cnt = char_count = base_addr[CyTFTC]; + + if (info->x_char) { /* send special char */ + outch = info->x_char; + base_addr[CyTDR] = outch; + char_count--; + info->x_char = 0; + } + + if (info->x_break) { + /* The Cirrus chip requires the "Embedded Transmit + Commands" of start break, delay, and end break + sequences to be sent. The duration of the + break is given in TICs, which runs at HZ + (typically 100) and the PPR runs at 200 Hz, + so the delay is duration * 200/HZ, and thus a + break can run from 1/100 sec to about 5/4 sec. + Need to check these values - RGH 141095. + */ + base_addr[CyTDR] = 0; /* start break */ + base_addr[CyTDR] = 0x81; + base_addr[CyTDR] = 0; /* delay a bit */ + base_addr[CyTDR] = 0x82; + base_addr[CyTDR] = info->x_break * 200 / HZ; + base_addr[CyTDR] = 0; /* terminate break */ + base_addr[CyTDR] = 0x83; + char_count -= 7; + info->x_break = 0; + } + + while (char_count > 0) { + if (!info->xmit_cnt) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + break; + } + if (info->xmit_buf == 0) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + break; + } + if (info->tty->stopped || info->tty->hw_stopped) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + break; + } + /* Because the Embedded Transmit Commands have been + enabled, we must check to see if the escape + character, NULL, is being sent. If it is, we + must ensure that there is room for it to be + doubled in the output stream. Therefore we + no longer advance the pointer when the character + is fetched, but rather wait until after the check + for a NULL output character. (This is necessary + because there may not be room for the two chars + needed to send a NULL. + */ + outch = info->xmit_buf[info->xmit_tail]; + if (outch) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) + & (PAGE_SIZE - 1); + base_addr[CyTDR] = outch; + char_count--; + } else { + if (char_count > 1) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) + & (PAGE_SIZE - 1); + base_addr[CyTDR] = outch; + base_addr[CyTDR] = 0; + char_count--; + char_count--; + } else { + break; + } + } + } + + if (info->xmit_cnt < WAKEUP_CHARS) + tty_wakeup(info->tty); + + base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS; + return IRQ_HANDLED; +} /* cy_tx_interrupt */ + +static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id) +{ + struct tty_struct *tty; + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + char data; + int char_count; + int save_cnt; + + /* determine the channel and change to that context */ + channel = (u_short) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + save_cnt = char_count = base_addr[CyRFOC]; + + /* if there is nowhere to put the data, discard it */ + if (info->tty == 0) { + while (char_count--) { + data = base_addr[CyRDR]; + } + } else { /* there is an open port for this data */ + tty = info->tty; + /* load # characters available from the chip */ + +#ifdef CYCLOM_ENABLE_MONITORING + ++info->mon.int_count; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; +#endif + while (char_count--) { + data = base_addr[CyRDR]; + tty_insert_flip_char(tty, data, TTY_NORMAL); +#ifdef CYCLOM_16Y_HACK + udelay(10L); +#endif + } + tty_schedule_flip(tty); + } + /* end of service */ + base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS; + return IRQ_HANDLED; +} /* cy_rx_interrupt */ + +/* This is called whenever a port becomes active; + interrupts are enabled and DTR & RTS are turned on. + */ +static int startup(struct cyclades_port *info) +{ + unsigned long flags; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + + if (info->flags & ASYNC_INITIALIZED) { + return 0; + } + + if (!info->type) { + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); + } + return 0; + } + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); + if (!info->xmit_buf) { + return -ENOMEM; + } + } + + config_setup(info); + + channel = info->line; + +#ifdef SERIAL_DEBUG_OPEN + printk("startup channel %d\n", channel); +#endif + + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR); + + base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */ + base_addr[CyMSVR1] = CyRTS; +/* CP('S');CP('1'); */ + base_addr[CyMSVR2] = CyDTR; + +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); +#endif + + base_addr[CyIER] |= CyRxData; + info->flags |= ASYNC_INITIALIZED; + + if (info->tty) { + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + local_irq_restore(flags); + +#ifdef SERIAL_DEBUG_OPEN + printk(" done\n"); +#endif + return 0; +} /* startup */ + +void start_xmit(struct cyclades_port *info) +{ + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + + channel = info->line; + local_irq_save(flags); + base_addr[CyCAR] = channel; + base_addr[CyIER] |= CyTxMpty; + local_irq_restore(flags); +} /* start_xmit */ + +/* + * This routine shuts down a serial port; interrupts are disabled, + * and DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct cyclades_port *info) +{ + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + + if (!(info->flags & ASYNC_INITIALIZED)) { +/* CP('$'); */ + return; + } + + channel = info->line; + +#ifdef SERIAL_DEBUG_OPEN + printk("shutdown channel %d\n", channel); +#endif + + /* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE + SENT BEFORE DROPPING THE LINE !!! (Perhaps + set some flag that is read when XMTY happens.) + Other choices are to delay some fixed interval + or schedule some later processing. + */ + local_irq_save(flags); + if (info->xmit_buf) { + free_page((unsigned long)info->xmit_buf); + info->xmit_buf = NULL; + } + + base_addr[CyCAR] = (u_char) channel; + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { + base_addr[CyMSVR1] = 0; +/* CP('C');CP('1'); */ + base_addr[CyMSVR2] = 0; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); +#endif + } + write_cy_cmd(base_addr, CyDIS_RCVR); + /* it may be appropriate to clear _XMIT at + some later date (after testing)!!! */ + + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); + } + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); + +#ifdef SERIAL_DEBUG_OPEN + printk(" done\n"); +#endif +} /* shutdown */ + +/* + * This routine finds or computes the various line characteristics. + */ +static void config_setup(struct cyclades_port *info) +{ + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + unsigned cflag; + int i; + unsigned char ti, need_init_chan = 0; + + if (!info->tty || !info->tty->termios) { + return; + } + if (info->line == -1) { + return; + } + cflag = info->tty->termios->c_cflag; + + /* baud rate */ + i = cflag & CBAUD; +#ifdef CBAUDEX +/* Starting with kernel 1.1.65, there is direct support for + higher baud rates. The following code supports those + changes. The conditional aspect allows this driver to be + used for earlier as well as later kernel versions. (The + mapping is slightly different from serial.c because there + is still the possibility of supporting 75 kbit/sec with + the Cyclades board.) + */ + if (i & CBAUDEX) { + if (i == B57600) + i = 16; + else if (i == B115200) + i = 18; +#ifdef B78600 + else if (i == B78600) + i = 17; +#endif + else + info->tty->termios->c_cflag &= ~CBAUDEX; + } +#endif + if (i == 15) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + i += 1; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + i += 3; + } + /* Don't ever change the speed of the console port. It will + * run at the speed specified in bootinfo, or at 19.2K */ + /* Actually, it should run at whatever speed 166Bug was using */ + /* Note info->timeout isn't used at present */ + if (info != serial_console_info) { + info->tbpr = baud_bpr[i]; /* Tx BPR */ + info->tco = baud_co[i]; /* Tx CO */ + info->rbpr = baud_bpr[i]; /* Rx BPR */ + info->rco = baud_co[i] >> 5; /* Rx CO */ + if (baud_table[i] == 134) { + info->timeout = + (info->xmit_fifo_size * HZ * 30 / 269) + 2; + /* get it right for 134.5 baud */ + } else if (baud_table[i]) { + info->timeout = + (info->xmit_fifo_size * HZ * 15 / baud_table[i]) + + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } + } + /* By tradition (is it a standard?) a baud rate of zero + implies the line should be/has been closed. A bit + later in this routine such a test is performed. */ + + /* byte size and parity */ + info->cor7 = 0; + info->cor6 = 0; + info->cor5 = 0; + info->cor4 = (info->default_threshold ? info->default_threshold : baud_cor4[i]); /* receive threshold */ + /* Following two lines added 101295, RGH. */ + /* It is obviously wrong to access CyCORx, and not info->corx here, + * try and remember to fix it later! */ + channel = info->line; + base_addr[CyCAR] = (u_char) channel; + if (C_CLOCAL(info->tty)) { + if (base_addr[CyIER] & CyMdmCh) + base_addr[CyIER] &= ~CyMdmCh; /* without modem intr */ + /* ignore 1->0 modem transitions */ + if (base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) + base_addr[CyCOR4] &= ~(CyDSR | CyCTS | CyDCD); + /* ignore 0->1 modem transitions */ + if (base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) + base_addr[CyCOR5] &= ~(CyDSR | CyCTS | CyDCD); + } else { + if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh) + base_addr[CyIER] |= CyMdmCh; /* with modem intr */ + /* act on 1->0 modem transitions */ + if ((base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) != + (CyDSR | CyCTS | CyDCD)) + base_addr[CyCOR4] |= CyDSR | CyCTS | CyDCD; + /* act on 0->1 modem transitions */ + if ((base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) != + (CyDSR | CyCTS | CyDCD)) + base_addr[CyCOR5] |= CyDSR | CyCTS | CyDCD; + } + info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP; + info->cor2 = CyETC; + switch (cflag & CSIZE) { + case CS5: + info->cor1 = Cy_5_BITS; + break; + case CS6: + info->cor1 = Cy_6_BITS; + break; + case CS7: + info->cor1 = Cy_7_BITS; + break; + case CS8: + info->cor1 = Cy_8_BITS; + break; + } + if (cflag & PARENB) { + if (cflag & PARODD) { + info->cor1 |= CyPARITY_O; + } else { + info->cor1 |= CyPARITY_E; + } + } else { + info->cor1 |= CyPARITY_NONE; + } + + /* CTS flow control flag */ +#if 0 + /* Don't complcate matters for now! RGH 141095 */ + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + info->cor2 |= CyCtsAE; + } else { + info->flags &= ~ASYNC_CTS_FLOW; + info->cor2 &= ~CyCtsAE; + } +#endif + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; + + /*********************************************** + The hardware option, CyRtsAO, presents RTS when + the chip has characters to send. Since most modems + use RTS as reverse (inbound) flow control, this + option is not used. If inbound flow control is + necessary, DTR can be programmed to provide the + appropriate signals for use with a non-standard + cable. Contact Marcio Saito for details. + ***********************************************/ + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + + /* CyCMR set once only in mvme167_init_serial() */ + if (base_addr[CyLICR] != channel << 2) + base_addr[CyLICR] = channel << 2; + if (base_addr[CyLIVR] != 0x5c) + base_addr[CyLIVR] = 0x5c; + + /* tx and rx baud rate */ + + if (base_addr[CyCOR1] != info->cor1) + need_init_chan = 1; + if (base_addr[CyTCOR] != info->tco) + base_addr[CyTCOR] = info->tco; + if (base_addr[CyTBPR] != info->tbpr) + base_addr[CyTBPR] = info->tbpr; + if (base_addr[CyRCOR] != info->rco) + base_addr[CyRCOR] = info->rco; + if (base_addr[CyRBPR] != info->rbpr) + base_addr[CyRBPR] = info->rbpr; + + /* set line characteristics according configuration */ + + if (base_addr[CySCHR1] != START_CHAR(info->tty)) + base_addr[CySCHR1] = START_CHAR(info->tty); + if (base_addr[CySCHR2] != STOP_CHAR(info->tty)) + base_addr[CySCHR2] = STOP_CHAR(info->tty); + if (base_addr[CySCRL] != START_CHAR(info->tty)) + base_addr[CySCRL] = START_CHAR(info->tty); + if (base_addr[CySCRH] != START_CHAR(info->tty)) + base_addr[CySCRH] = START_CHAR(info->tty); + if (base_addr[CyCOR1] != info->cor1) + base_addr[CyCOR1] = info->cor1; + if (base_addr[CyCOR2] != info->cor2) + base_addr[CyCOR2] = info->cor2; + if (base_addr[CyCOR3] != info->cor3) + base_addr[CyCOR3] = info->cor3; + if (base_addr[CyCOR4] != info->cor4) + base_addr[CyCOR4] = info->cor4; + if (base_addr[CyCOR5] != info->cor5) + base_addr[CyCOR5] = info->cor5; + if (base_addr[CyCOR6] != info->cor6) + base_addr[CyCOR6] = info->cor6; + if (base_addr[CyCOR7] != info->cor7) + base_addr[CyCOR7] = info->cor7; + + if (need_init_chan) + write_cy_cmd(base_addr, CyINIT_CHAN); + + base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */ + + /* 2ms default rx timeout */ + ti = info->default_timeout ? info->default_timeout : 0x02; + if (base_addr[CyRTPRL] != ti) + base_addr[CyRTPRL] = ti; + if (base_addr[CyRTPRH] != 0) + base_addr[CyRTPRH] = 0; + + /* Set up RTS here also ????? RGH 141095 */ + if (i == 0) { /* baud rate is zero, turn off line */ + if ((base_addr[CyMSVR2] & CyDTR) == CyDTR) + base_addr[CyMSVR2] = 0; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); +#endif + } else { + if ((base_addr[CyMSVR2] & CyDTR) != CyDTR) + base_addr[CyMSVR2] = CyDTR; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); +#endif + } + + if (info->tty) { + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + + local_irq_restore(flags); + +} /* config_setup */ + +static int cy_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + +#ifdef SERIAL_DEBUG_IO + printk("cy_put_char %s(0x%02x)\n", tty->name, ch); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_put_char")) + return 0; + + if (!info->xmit_buf) + return 0; + + local_irq_save(flags); + if (info->xmit_cnt >= PAGE_SIZE - 1) { + local_irq_restore(flags); + return 0; + } + + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= PAGE_SIZE - 1; + info->xmit_cnt++; + local_irq_restore(flags); + return 1; +} /* cy_put_char */ + +static void cy_flush_chars(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + +#ifdef SERIAL_DEBUG_IO + printk("cy_flush_chars %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) + return; + + if (info->xmit_cnt <= 0 || tty->stopped + || tty->hw_stopped || !info->xmit_buf) + return; + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = channel; + base_addr[CyIER] |= CyTxMpty; + local_irq_restore(flags); +} /* cy_flush_chars */ + +/* This routine gets called when tty_write has put something into + the write_queue. If the port is not already transmitting stuff, + start it off by enabling interrupts. The interrupt service + routine will then ensure that the characters are sent. If the + port is already active, there is no need to kick it. + */ +static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + int c, total = 0; + +#ifdef SERIAL_DEBUG_IO + printk("cy_write %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_write")) { + return 0; + } + + if (!info->xmit_buf) { + return 0; + } + + while (1) { + local_irq_save(flags); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) { + local_irq_restore(flags); + break; + } + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = + (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); + info->xmit_cnt += c; + local_irq_restore(flags); + + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + start_xmit(info); + } + return total; +} /* cy_write */ + +static int cy_write_room(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + int ret; + +#ifdef SERIAL_DEBUG_IO + printk("cy_write_room %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_write_room")) + return 0; + ret = PAGE_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} /* cy_write_room */ + +static int cy_chars_in_buffer(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef SERIAL_DEBUG_IO + printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) + return 0; + + return info->xmit_cnt; +} /* cy_chars_in_buffer */ + +static void cy_flush_buffer(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + +#ifdef SERIAL_DEBUG_IO + printk("cy_flush_buffer %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) + return; + local_irq_save(flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + local_irq_restore(flags); + tty_wakeup(tty); +} /* cy_flush_buffer */ + +/* This routine is called by the upper-layer tty layer to signal + that incoming characters should be throttled or that the + throttle should be released. + */ +static void cy_throttle(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); + printk("cy_throttle %s\n", tty->name); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) { + return; + } + + if (I_IXOFF(tty)) { + info->x_char = STOP_CHAR(tty); + /* Should use the "Send Special Character" feature!!! */ + } + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + base_addr[CyMSVR1] = 0; + local_irq_restore(flags); +} /* cy_throttle */ + +static void cy_unthrottle(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); + printk("cy_unthrottle %s\n", tty->name); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) { + return; + } + + if (I_IXOFF(tty)) { + info->x_char = START_CHAR(tty); + /* Should use the "Send Special Character" feature!!! */ + } + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + base_addr[CyMSVR1] = CyRTS; + local_irq_restore(flags); +} /* cy_unthrottle */ + +static int +get_serial_info(struct cyclades_port *info, + struct serial_struct __user * retinfo) +{ + struct serial_struct tmp; + +/* CP('g'); */ + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->line; + tmp.irq = 0; + tmp.flags = info->flags; + tmp.baud_base = 0; /*!!! */ + tmp.close_delay = info->close_delay; + tmp.custom_divisor = 0; /*!!! */ + tmp.hub6 = 0; /*!!! */ + return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; +} /* get_serial_info */ + +static int +set_serial_info(struct cyclades_port *info, + struct serial_struct __user * new_info) +{ + struct serial_struct new_serial; + struct cyclades_port old_info; + +/* CP('s'); */ + if (!new_info) + return -EFAULT; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != + (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + goto check_and_exit; + } + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->close_delay = new_serial.close_delay; + +check_and_exit: + if (info->flags & ASYNC_INITIALIZED) { + config_setup(info); + return 0; + } + return startup(info); +} /* set_serial_info */ + +static int cy_tiocmget(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + int channel; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + unsigned long flags; + unsigned char status; + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + status = base_addr[CyMSVR1] | base_addr[CyMSVR2]; + local_irq_restore(flags); + + return ((status & CyRTS) ? TIOCM_RTS : 0) + | ((status & CyDTR) ? TIOCM_DTR : 0) + | ((status & CyDCD) ? TIOCM_CAR : 0) + | ((status & CyDSR) ? TIOCM_DSR : 0) + | ((status & CyCTS) ? TIOCM_CTS : 0); +} /* cy_tiocmget */ + +static int +cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) +{ + struct cyclades_port *info = tty->driver_data; + int channel; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + unsigned long flags; + + channel = info->line; + + if (set & TIOCM_RTS) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + base_addr[CyMSVR1] = CyRTS; + local_irq_restore(flags); + } + if (set & TIOCM_DTR) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; +/* CP('S');CP('2'); */ + base_addr[CyMSVR2] = CyDTR; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); +#endif + local_irq_restore(flags); + } + + if (clear & TIOCM_RTS) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + base_addr[CyMSVR1] = 0; + local_irq_restore(flags); + } + if (clear & TIOCM_DTR) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; +/* CP('C');CP('2'); */ + base_addr[CyMSVR2] = 0; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); +#endif + local_irq_restore(flags); + } + + return 0; +} /* set_modem_info */ + +static void send_break(struct cyclades_port *info, int duration) +{ /* Let the transmit ISR take care of this (since it + requires stuffing characters into the output stream). + */ + info->x_break = duration; + if (!info->xmit_cnt) { + start_xmit(info); + } +} /* send_break */ + +static int +get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon) +{ + + if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) + return -EFAULT; + info->mon.int_count = 0; + info->mon.char_count = 0; + info->mon.char_max = 0; + info->mon.char_last = 0; + return 0; +} + +static int set_threshold(struct cyclades_port *info, unsigned long __user * arg) +{ + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + unsigned long value; + int channel; + + if (get_user(value, arg)) + return -EFAULT; + + channel = info->line; + info->cor4 &= ~CyREC_FIFO; + info->cor4 |= value & CyREC_FIFO; + base_addr[CyCOR4] = info->cor4; + return 0; +} + +static int +get_threshold(struct cyclades_port *info, unsigned long __user * value) +{ + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + unsigned long tmp; + + channel = info->line; + + tmp = base_addr[CyCOR4] & CyREC_FIFO; + return put_user(tmp, value); +} + +static int +set_default_threshold(struct cyclades_port *info, unsigned long __user * arg) +{ + unsigned long value; + + if (get_user(value, arg)) + return -EFAULT; + + info->default_threshold = value & 0x0f; + return 0; +} + +static int +get_default_threshold(struct cyclades_port *info, unsigned long __user * value) +{ + return put_user(info->default_threshold, value); +} + +static int set_timeout(struct cyclades_port *info, unsigned long __user * arg) +{ + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + unsigned long value; + + if (get_user(value, arg)) + return -EFAULT; + + channel = info->line; + + base_addr[CyRTPRL] = value & 0xff; + base_addr[CyRTPRH] = (value >> 8) & 0xff; + return 0; +} + +static int get_timeout(struct cyclades_port *info, unsigned long __user * value) +{ + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + unsigned long tmp; + + channel = info->line; + + tmp = base_addr[CyRTPRL]; + return put_user(tmp, value); +} + +static int set_default_timeout(struct cyclades_port *info, unsigned long value) +{ + info->default_timeout = value & 0xff; + return 0; +} + +static int +get_default_timeout(struct cyclades_port *info, unsigned long __user * value) +{ + return put_user(info->default_timeout, value); +} + +static int +cy_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct cyclades_port *info = tty->driver_data; + int ret_val = 0; + void __user *argp = (void __user *)arg; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */ +#endif + + tty_lock(); + + switch (cmd) { + case CYGETMON: + ret_val = get_mon_info(info, argp); + break; + case CYGETTHRESH: + ret_val = get_threshold(info, argp); + break; + case CYSETTHRESH: + ret_val = set_threshold(info, argp); + break; + case CYGETDEFTHRESH: + ret_val = get_default_threshold(info, argp); + break; + case CYSETDEFTHRESH: + ret_val = set_default_threshold(info, argp); + break; + case CYGETTIMEOUT: + ret_val = get_timeout(info, argp); + break; + case CYSETTIMEOUT: + ret_val = set_timeout(info, argp); + break; + case CYGETDEFTIMEOUT: + ret_val = get_default_timeout(info, argp); + break; + case CYSETDEFTIMEOUT: + ret_val = set_default_timeout(info, (unsigned long)arg); + break; + case TCSBRK: /* SVID version: non-zero arg --> no break */ + ret_val = tty_check_change(tty); + if (ret_val) + break; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, HZ / 4); /* 1/4 second */ + break; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + ret_val = tty_check_change(tty); + if (ret_val) + break; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg * (HZ / 10) : HZ / 4); + break; + +/* The following commands are incompletely implemented!!! */ + case TIOCGSERIAL: + ret_val = get_serial_info(info, argp); + break; + case TIOCSSERIAL: + ret_val = set_serial_info(info, argp); + break; + default: + ret_val = -ENOIOCTLCMD; + } + tty_unlock(); + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_ioctl done\n"); +#endif + + return ret_val; +} /* cy_ioctl */ + +static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_set_termios %s\n", tty->name); +#endif + + if (tty->termios->c_cflag == old_termios->c_cflag) + return; + config_setup(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->stopped = 0; + cy_start(tty); + } +#ifdef tytso_patch_94Nov25_1726 + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); +#endif +} /* cy_set_termios */ + +static void cy_close(struct tty_struct *tty, struct file *filp) +{ + struct cyclades_port *info = tty->driver_data; + +/* CP('C'); */ +#ifdef SERIAL_DEBUG_OTHER + printk("cy_close %s\n", tty->name); +#endif + + if (!info || serial_paranoia_check(info, tty->name, "cy_close")) { + return; + } +#ifdef SERIAL_DEBUG_OPEN + printk("cy_close %s, count = %d\n", tty->name, info->count); +#endif + + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("cy_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: decrementing count to %d\n", __LINE__, + info->count - 1); +#endif + if (--info->count < 0) { + printk("cy_close: bad serial port count for ttys%d: %d\n", + info->line, info->count); +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: setting count to 0\n", __LINE__); +#endif + info->count = 0; + } + if (info->count) + return; + info->flags |= ASYNC_CLOSING; + if (info->flags & ASYNC_INITIALIZED) + tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ + shutdown(info); + cy_flush_buffer(tty); + tty_ldisc_flush(tty); + info->tty = NULL; + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs + (info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_close done\n"); +#endif +} /* cy_close */ + +/* + * cy_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void cy_hangup(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_hangup %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_hangup")) + return; + + shutdown(info); +#if 0 + info->event = 0; + info->count = 0; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: setting count to 0\n", __LINE__); +#endif + info->tty = 0; +#endif + info->flags &= ~ASYNC_NORMAL_ACTIVE; + wake_up_interruptible(&info->open_wait); +} /* cy_hangup */ + +/* + * ------------------------------------------------------------ + * cy_open() and friends + * ------------------------------------------------------------ + */ + +static int +block_til_ready(struct tty_struct *tty, struct file *filp, + struct cyclades_port *info) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + int channel; + int retval; + volatile u_char *base_addr = (u_char *) BASE_ADDR; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&info->close_wait); + if (info->flags & ASYNC_HUP_NOTIFY) { + return -EAGAIN; + } else { + return -ERESTARTSYS; + } + } + + /* + * If non-blocking mode is set, then make the check up front + * and then exit. + */ + if (filp->f_flags & O_NONBLOCK) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * cy_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: %s, count = %d\n", + tty->name, info->count); + /**/ +#endif + info->count--; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count); +#endif + info->blocked_open++; + + channel = info->line; + + while (1) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + base_addr[CyMSVR1] = CyRTS; +/* CP('S');CP('4'); */ + base_addr[CyMSVR2] = CyDTR; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); +#endif + local_irq_restore(flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) + || !(info->flags & ASYNC_INITIALIZED)) { + if (info->flags & ASYNC_HUP_NOTIFY) { + retval = -EAGAIN; + } else { + retval = -ERESTARTSYS; + } + break; + } + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; +/* CP('L');CP1(1 && C_CLOCAL(tty)); CP1(1 && (base_addr[CyMSVR1] & CyDCD) ); */ + if (!(info->flags & ASYNC_CLOSING) + && (C_CLOCAL(tty) + || (base_addr[CyMSVR1] & CyDCD))) { + local_irq_restore(flags); + break; + } + local_irq_restore(flags); + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: %s, count = %d\n", + tty->name, info->count); + /**/ +#endif + tty_unlock(); + schedule(); + tty_lock(); + } + __set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) { + info->count++; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: incrementing count to %d\n", __LINE__, + info->count); +#endif + } + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: %s, count = %d\n", + tty->name, info->count); + /**/ +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} /* block_til_ready */ + +/* + * This routine is called whenever a serial port is opened. It + * performs the serial-specific initialization for the tty structure. + */ +int cy_open(struct tty_struct *tty, struct file *filp) +{ + struct cyclades_port *info; + int retval, line; + +/* CP('O'); */ + line = tty->index; + if ((line < 0) || (NR_PORTS <= line)) { + return -ENODEV; + } + info = &cy_port[line]; + if (info->line < 0) { + return -ENODEV; + } +#ifdef SERIAL_DEBUG_OTHER + printk("cy_open %s\n", tty->name); /* */ +#endif + if (serial_paranoia_check(info, tty->name, "cy_open")) { + return -ENODEV; + } +#ifdef SERIAL_DEBUG_OPEN + printk("cy_open %s, count = %d\n", tty->name, info->count); + /**/ +#endif + info->count++; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count); +#endif + tty->driver_data = info; + info->tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) { + return retval; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("cy_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } +#ifdef SERIAL_DEBUG_OPEN + printk("cy_open done\n"); + /**/ +#endif + return 0; +} /* cy_open */ + +/* + * --------------------------------------------------------------------- + * serial167_init() and friends + * + * serial167_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ +static void show_version(void) +{ + printk("MVME166/167 cd2401 driver\n"); +} /* show_version */ + +/* initialize chips on card -- return number of valid + chips (which is number of ports/4) */ + +/* + * This initialises the hardware to a reasonable state. It should + * probe the chip first so as to copy 166-Bug setup as a default for + * port 0. It initialises CMR to CyASYNC; that is never done again, so + * as to limit the number of CyINIT_CHAN commands in normal running. + * + * ... I wonder what I should do if this fails ... + */ + +void mvme167_serial_console_setup(int cflag) +{ + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int ch; + u_char spd; + u_char rcor, rbpr, badspeed = 0; + unsigned long flags; + + local_irq_save(flags); + + /* + * First probe channel zero of the chip, to see what speed has + * been selected. + */ + + base_addr[CyCAR] = 0; + + rcor = base_addr[CyRCOR] << 5; + rbpr = base_addr[CyRBPR]; + + for (spd = 0; spd < sizeof(baud_bpr); spd++) + if (rbpr == baud_bpr[spd] && rcor == baud_co[spd]) + break; + if (spd >= sizeof(baud_bpr)) { + spd = 14; /* 19200 */ + badspeed = 1; /* Failed to identify speed */ + } + initial_console_speed = spd; + + /* OK, we have chosen a speed, now reset and reinitialise */ + + my_udelay(20000L); /* Allow time for any active o/p to complete */ + if (base_addr[CyCCR] != 0x00) { + local_irq_restore(flags); + /* printk(" chip is never idle (CCR != 0)\n"); */ + return; + } + + base_addr[CyCCR] = CyCHIP_RESET; /* Reset the chip */ + my_udelay(1000L); + + if (base_addr[CyGFRCR] == 0x00) { + local_irq_restore(flags); + /* printk(" chip is not responding (GFRCR stayed 0)\n"); */ + return; + } + + /* + * System clock is 20Mhz, divided by 2048, so divide by 10 for a 1.0ms + * tick + */ + + base_addr[CyTPR] = 10; + + base_addr[CyPILR1] = 0x01; /* Interrupt level for modem change */ + base_addr[CyPILR2] = 0x02; /* Interrupt level for tx ints */ + base_addr[CyPILR3] = 0x03; /* Interrupt level for rx ints */ + + /* + * Attempt to set up all channels to something reasonable, and + * bang out a INIT_CHAN command. We should then be able to limit + * the amount of fiddling we have to do in normal running. + */ + + for (ch = 3; ch >= 0; ch--) { + base_addr[CyCAR] = (u_char) ch; + base_addr[CyIER] = 0; + base_addr[CyCMR] = CyASYNC; + base_addr[CyLICR] = (u_char) ch << 2; + base_addr[CyLIVR] = 0x5c; + base_addr[CyTCOR] = baud_co[spd]; + base_addr[CyTBPR] = baud_bpr[spd]; + base_addr[CyRCOR] = baud_co[spd] >> 5; + base_addr[CyRBPR] = baud_bpr[spd]; + base_addr[CySCHR1] = 'Q' & 0x1f; + base_addr[CySCHR2] = 'X' & 0x1f; + base_addr[CySCRL] = 0; + base_addr[CySCRH] = 0; + base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE; + base_addr[CyCOR2] = 0; + base_addr[CyCOR3] = Cy_1_STOP; + base_addr[CyCOR4] = baud_cor4[spd]; + base_addr[CyCOR5] = 0; + base_addr[CyCOR6] = 0; + base_addr[CyCOR7] = 0; + base_addr[CyRTPRL] = 2; + base_addr[CyRTPRH] = 0; + base_addr[CyMSVR1] = 0; + base_addr[CyMSVR2] = 0; + write_cy_cmd(base_addr, CyINIT_CHAN | CyDIS_RCVR | CyDIS_XMTR); + } + + /* + * Now do specials for channel zero.... + */ + + base_addr[CyMSVR1] = CyRTS; + base_addr[CyMSVR2] = CyDTR; + base_addr[CyIER] = CyRxData; + write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR); + + local_irq_restore(flags); + + my_udelay(20000L); /* Let it all settle down */ + + printk("CD2401 initialised, chip is rev 0x%02x\n", base_addr[CyGFRCR]); + if (badspeed) + printk + (" WARNING: Failed to identify line speed, rcor=%02x,rbpr=%02x\n", + rcor >> 5, rbpr); +} /* serial_console_init */ + +static const struct tty_operations cy_ops = { + .open = cy_open, + .close = cy_close, + .write = cy_write, + .put_char = cy_put_char, + .flush_chars = cy_flush_chars, + .write_room = cy_write_room, + .chars_in_buffer = cy_chars_in_buffer, + .flush_buffer = cy_flush_buffer, + .ioctl = cy_ioctl, + .throttle = cy_throttle, + .unthrottle = cy_unthrottle, + .set_termios = cy_set_termios, + .stop = cy_stop, + .start = cy_start, + .hangup = cy_hangup, + .tiocmget = cy_tiocmget, + .tiocmset = cy_tiocmset, +}; + +/* The serial driver boot-time initialization code! + Hardware I/O ports are mapped to character special devices on a + first found, first allocated manner. That is, this code searches + for Cyclom cards in the system. As each is found, it is probed + to discover how many chips (and thus how many ports) are present. + These ports are mapped to the tty ports 64 and upward in monotonic + fashion. If an 8-port card is replaced with a 16-port card, the + port mapping on a following card will shift. + + This approach is different from what is used in the other serial + device driver because the Cyclom is more properly a multiplexer, + not just an aggregation of serial ports on one card. + + If there are more cards with more ports than have been statically + allocated above, a warning is printed and the extra ports are ignored. + */ +static int __init serial167_init(void) +{ + struct cyclades_port *info; + int ret = 0; + int good_ports = 0; + int port_num = 0; + int index; + int DefSpeed; +#ifdef notyet + struct sigaction sa; +#endif + + if (!(mvme16x_config & MVME16x_CONFIG_GOT_CD2401)) + return 0; + + cy_serial_driver = alloc_tty_driver(NR_PORTS); + if (!cy_serial_driver) + return -ENOMEM; + +#if 0 + scrn[1] = '\0'; +#endif + + show_version(); + + /* Has "console=0,9600n8" been used in bootinfo to change speed? */ + if (serial_console_cflag) + DefSpeed = serial_console_cflag & 0017; + else { + DefSpeed = initial_console_speed; + serial_console_info = &cy_port[0]; + serial_console_cflag = DefSpeed | CS8; +#if 0 + serial_console = 64; /*callout_driver.minor_start */ +#endif + } + + /* Initialize the tty_driver structure */ + + cy_serial_driver->owner = THIS_MODULE; + cy_serial_driver->name = "ttyS"; + cy_serial_driver->major = TTY_MAJOR; + cy_serial_driver->minor_start = 64; + cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; + cy_serial_driver->init_termios = tty_std_termios; + cy_serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + cy_serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(cy_serial_driver, &cy_ops); + + ret = tty_register_driver(cy_serial_driver); + if (ret) { + printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n"); + put_tty_driver(cy_serial_driver); + return ret; + } + + port_num = 0; + info = cy_port; + for (index = 0; index < 1; index++) { + + good_ports = 4; + + if (port_num < NR_PORTS) { + while (good_ports-- && port_num < NR_PORTS) { + /*** initialize port ***/ + info->magic = CYCLADES_MAGIC; + info->type = PORT_CIRRUS; + info->card = index; + info->line = port_num; + info->flags = STD_COM_FLAGS; + info->tty = NULL; + info->xmit_fifo_size = 12; + info->cor1 = CyPARITY_NONE | Cy_8_BITS; + info->cor2 = CyETC; + info->cor3 = Cy_1_STOP; + info->cor4 = 0x08; /* _very_ small receive threshold */ + info->cor5 = 0; + info->cor6 = 0; + info->cor7 = 0; + info->tbpr = baud_bpr[DefSpeed]; /* Tx BPR */ + info->tco = baud_co[DefSpeed]; /* Tx CO */ + info->rbpr = baud_bpr[DefSpeed]; /* Rx BPR */ + info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */ + info->close_delay = 0; + info->x_char = 0; + info->count = 0; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: setting count to 0\n", + __LINE__); +#endif + info->blocked_open = 0; + info->default_threshold = 0; + info->default_timeout = 0; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + /* info->session */ + /* info->pgrp */ +/*** !!!!!!!! this may expose new bugs !!!!!!!!! *********/ + info->read_status_mask = + CyTIMEOUT | CySPECHAR | CyBREAK | CyPARITY | + CyFRAME | CyOVERRUN; + /* info->timeout */ + + printk("ttyS%d ", info->line); + port_num++; + info++; + if (!(port_num & 7)) { + printk("\n "); + } + } + } + printk("\n"); + } + while (port_num < NR_PORTS) { + info->line = -1; + port_num++; + info++; + } + + ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0, + "cd2401_errors", cd2401_rxerr_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_errors IRQ"); + goto cleanup_serial_driver; + } + + ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0, + "cd2401_modem", cd2401_modem_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_modem IRQ"); + goto cleanup_irq_cd2401_errors; + } + + ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0, + "cd2401_txints", cd2401_tx_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_txints IRQ"); + goto cleanup_irq_cd2401_modem; + } + + ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0, + "cd2401_rxints", cd2401_rx_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_rxints IRQ"); + goto cleanup_irq_cd2401_txints; + } + + /* Now we have registered the interrupt handlers, allow the interrupts */ + + pcc2chip[PccSCCMICR] = 0x15; /* Serial ints are level 5 */ + pcc2chip[PccSCCTICR] = 0x15; + pcc2chip[PccSCCRICR] = 0x15; + + pcc2chip[PccIMLR] = 3; /* Allow PCC2 ints above 3!? */ + + return 0; +cleanup_irq_cd2401_txints: + free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt); +cleanup_irq_cd2401_modem: + free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt); +cleanup_irq_cd2401_errors: + free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt); +cleanup_serial_driver: + if (tty_unregister_driver(cy_serial_driver)) + printk(KERN_ERR + "Couldn't unregister MVME166/7 serial driver\n"); + put_tty_driver(cy_serial_driver); + return ret; +} /* serial167_init */ + +module_init(serial167_init); + +#ifdef CYCLOM_SHOW_STATUS +static void show_status(int line_num) +{ + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + struct cyclades_port *info; + unsigned long flags; + + info = &cy_port[line_num]; + channel = info->line; + printk(" channel %d\n", channel); + /**/ printk(" cy_port\n"); + printk(" card line flags = %d %d %x\n", + info->card, info->line, info->flags); + printk + (" *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n", + (long)info->tty, info->read_status_mask, info->timeout, + info->xmit_fifo_size); + printk(" cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n", + info->cor1, info->cor2, info->cor3, info->cor4, info->cor5, + info->cor6, info->cor7); + printk(" tbpr,tco,rbpr,rco = %d %d %d %d\n", info->tbpr, info->tco, + info->rbpr, info->rco); + printk(" close_delay event count = %d %d %d\n", info->close_delay, + info->event, info->count); + printk(" x_char blocked_open = %x %x\n", info->x_char, + info->blocked_open); + printk(" open_wait = %lx %lx %lx\n", (long)info->open_wait); + + local_irq_save(flags); + +/* Global Registers */ + + printk(" CyGFRCR %x\n", base_addr[CyGFRCR]); + printk(" CyCAR %x\n", base_addr[CyCAR]); + printk(" CyRISR %x\n", base_addr[CyRISR]); + printk(" CyTISR %x\n", base_addr[CyTISR]); + printk(" CyMISR %x\n", base_addr[CyMISR]); + printk(" CyRIR %x\n", base_addr[CyRIR]); + printk(" CyTIR %x\n", base_addr[CyTIR]); + printk(" CyMIR %x\n", base_addr[CyMIR]); + printk(" CyTPR %x\n", base_addr[CyTPR]); + + base_addr[CyCAR] = (u_char) channel; + +/* Virtual Registers */ + +#if 0 + printk(" CyRIVR %x\n", base_addr[CyRIVR]); + printk(" CyTIVR %x\n", base_addr[CyTIVR]); + printk(" CyMIVR %x\n", base_addr[CyMIVR]); + printk(" CyMISR %x\n", base_addr[CyMISR]); +#endif + +/* Channel Registers */ + + printk(" CyCCR %x\n", base_addr[CyCCR]); + printk(" CyIER %x\n", base_addr[CyIER]); + printk(" CyCOR1 %x\n", base_addr[CyCOR1]); + printk(" CyCOR2 %x\n", base_addr[CyCOR2]); + printk(" CyCOR3 %x\n", base_addr[CyCOR3]); + printk(" CyCOR4 %x\n", base_addr[CyCOR4]); + printk(" CyCOR5 %x\n", base_addr[CyCOR5]); +#if 0 + printk(" CyCCSR %x\n", base_addr[CyCCSR]); + printk(" CyRDCR %x\n", base_addr[CyRDCR]); +#endif + printk(" CySCHR1 %x\n", base_addr[CySCHR1]); + printk(" CySCHR2 %x\n", base_addr[CySCHR2]); +#if 0 + printk(" CySCHR3 %x\n", base_addr[CySCHR3]); + printk(" CySCHR4 %x\n", base_addr[CySCHR4]); + printk(" CySCRL %x\n", base_addr[CySCRL]); + printk(" CySCRH %x\n", base_addr[CySCRH]); + printk(" CyLNC %x\n", base_addr[CyLNC]); + printk(" CyMCOR1 %x\n", base_addr[CyMCOR1]); + printk(" CyMCOR2 %x\n", base_addr[CyMCOR2]); +#endif + printk(" CyRTPRL %x\n", base_addr[CyRTPRL]); + printk(" CyRTPRH %x\n", base_addr[CyRTPRH]); + printk(" CyMSVR1 %x\n", base_addr[CyMSVR1]); + printk(" CyMSVR2 %x\n", base_addr[CyMSVR2]); + printk(" CyRBPR %x\n", base_addr[CyRBPR]); + printk(" CyRCOR %x\n", base_addr[CyRCOR]); + printk(" CyTBPR %x\n", base_addr[CyTBPR]); + printk(" CyTCOR %x\n", base_addr[CyTCOR]); + + local_irq_restore(flags); +} /* show_status */ +#endif + +#if 0 +/* Dummy routine in mvme16x/config.c for now */ + +/* Serial console setup. Called from linux/init/main.c */ + +void console_setup(char *str, int *ints) +{ + char *s; + int baud, bits, parity; + int cflag = 0; + + /* Sanity check. */ + if (ints[0] > 3 || ints[1] > 3) + return; + + /* Get baud, bits and parity */ + baud = 2400; + bits = 8; + parity = 'n'; + if (ints[2]) + baud = ints[2]; + if ((s = strchr(str, ','))) { + do { + s++; + } while (*s >= '0' && *s <= '9'); + if (*s) + parity = *s++; + if (*s) + bits = *s - '0'; + } + + /* Now construct a cflag setting. */ + switch (baud) { + case 1200: + cflag |= B1200; + break; + case 9600: + cflag |= B9600; + break; + case 19200: + cflag |= B19200; + break; + case 38400: + cflag |= B38400; + break; + case 2400: + default: + cflag |= B2400; + break; + } + switch (bits) { + case 7: + cflag |= CS7; + break; + default: + case 8: + cflag |= CS8; + break; + } + switch (parity) { + case 'o': + case 'O': + cflag |= PARODD; + break; + case 'e': + case 'E': + cflag |= PARENB; + break; + } + + serial_console_info = &cy_port[ints[1]]; + serial_console_cflag = cflag; + serial_console = ints[1] + 64; /*callout_driver.minor_start */ +} +#endif + +/* + * The following is probably out of date for 2.1.x serial console stuff. + * + * The console is registered early on from arch/m68k/kernel/setup.c, and + * it therefore relies on the chip being setup correctly by 166-Bug. This + * seems reasonable, as the serial port has been used to invoke the system + * boot. It also means that this function must not rely on any data + * initialisation performed by serial167_init() etc. + * + * Of course, once the console has been registered, we had better ensure + * that serial167_init() doesn't leave the chip non-functional. + * + * The console must be locked when we get here. + */ + +void serial167_console_write(struct console *co, const char *str, + unsigned count) +{ + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + unsigned long flags; + volatile u_char sink; + u_char ier; + int port; + u_char do_lf = 0; + int i = 0; + + local_irq_save(flags); + + /* Ensure transmitter is enabled! */ + + port = 0; + base_addr[CyCAR] = (u_char) port; + while (base_addr[CyCCR]) + ; + base_addr[CyCCR] = CyENB_XMTR; + + ier = base_addr[CyIER]; + base_addr[CyIER] = CyTxMpty; + + while (1) { + if (pcc2chip[PccSCCTICR] & 0x20) { + /* We have a Tx int. Acknowledge it */ + sink = pcc2chip[PccTPIACKR]; + if ((base_addr[CyLICR] >> 2) == port) { + if (i == count) { + /* Last char of string is now output */ + base_addr[CyTEOIR] = CyNOTRANS; + break; + } + if (do_lf) { + base_addr[CyTDR] = '\n'; + str++; + i++; + do_lf = 0; + } else if (*str == '\n') { + base_addr[CyTDR] = '\r'; + do_lf = 1; + } else { + base_addr[CyTDR] = *str++; + i++; + } + base_addr[CyTEOIR] = 0; + } else + base_addr[CyTEOIR] = CyNOTRANS; + } + } + + base_addr[CyIER] = ier; + + local_irq_restore(flags); +} + +static struct tty_driver *serial167_console_device(struct console *c, + int *index) +{ + *index = c->index; + return cy_serial_driver; +} + +static struct console sercons = { + .name = "ttyS", + .write = serial167_console_write, + .device = serial167_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init serial167_console_init(void) +{ + if (vme_brdtype == VME_TYPE_MVME166 || + vme_brdtype == VME_TYPE_MVME167 || + vme_brdtype == VME_TYPE_MVME177) { + mvme167_serial_console_setup(0); + register_console(&sercons); + } + return 0; +} + +console_initcall(serial167_console_init); + +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/tty/specialix.c b/drivers/staging/tty/specialix.c new file mode 100644 index 000000000000..47e5753f732a --- /dev/null +++ b/drivers/staging/tty/specialix.c @@ -0,0 +1,2368 @@ +/* + * specialix.c -- specialix IO8+ multiport serial driver. + * + * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) + * + * Specialix pays for the development and support of this driver. + * Please DO contact io8-linux@specialix.co.uk if you require + * support. But please read the documentation (specialix.txt) + * first. + * + * This driver was developped in the BitWizard linux device + * driver service. If you require a linux device driver for your + * product, please contact devices@BitWizard.nl for a quote. + * + * This code is firmly based on the riscom/8 serial driver, + * written by Dmitry Gorodchanin. The specialix IO8+ card + * programming information was obtained from the CL-CD1865 Data + * Book, and Specialix document number 6200059: IO8+ Hardware + * Functional Specification. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * Revision history: + * + * Revision 1.0: April 1st 1997. + * Initial release for alpha testing. + * Revision 1.1: April 14th 1997. + * Incorporated Richard Hudsons suggestions, + * removed some debugging printk's. + * Revision 1.2: April 15th 1997. + * Ported to 2.1.x kernels. + * Revision 1.3: April 17th 1997 + * Backported to 2.0. (Compatibility macros). + * Revision 1.4: April 18th 1997 + * Fixed DTR/RTS bug that caused the card to indicate + * "don't send data" to a modem after the password prompt. + * Fixed bug for premature (fake) interrupts. + * Revision 1.5: April 19th 1997 + * fixed a minor typo in the header file, cleanup a little. + * performance warnings are now MAXed at once per minute. + * Revision 1.6: May 23 1997 + * Changed the specialix=... format to include interrupt. + * Revision 1.7: May 27 1997 + * Made many more debug printk's a compile time option. + * Revision 1.8: Jul 1 1997 + * port to linux-2.1.43 kernel. + * Revision 1.9: Oct 9 1998 + * Added stuff for the IO8+/PCI version. + * Revision 1.10: Oct 22 1999 / Jan 21 2000. + * Added stuff for setserial. + * Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr) + * + */ + +#define VERSION "1.11" + + +/* + * There is a bunch of documentation about the card, jumpers, config + * settings, restrictions, cables, device names and numbers in + * Documentation/serial/specialix.txt + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "specialix_io8.h" +#include "cd1865.h" + + +/* + This driver can spew a whole lot of debugging output at you. If you + need maximum performance, you should disable the DEBUG define. To + aid in debugging in the field, I'm leaving the compile-time debug + features enabled, and disable them "runtime". That allows me to + instruct people with problems to enable debugging without requiring + them to recompile... +*/ +#define DEBUG + +static int sx_debug; +static int sx_rxfifo = SPECIALIX_RXFIFO; +static int sx_rtscts; + +#ifdef DEBUG +#define dprintk(f, str...) if (sx_debug & f) printk(str) +#else +#define dprintk(f, str...) /* nothing */ +#endif + +#define SX_DEBUG_FLOW 0x0001 +#define SX_DEBUG_DATA 0x0002 +#define SX_DEBUG_PROBE 0x0004 +#define SX_DEBUG_CHAN 0x0008 +#define SX_DEBUG_INIT 0x0010 +#define SX_DEBUG_RX 0x0020 +#define SX_DEBUG_TX 0x0040 +#define SX_DEBUG_IRQ 0x0080 +#define SX_DEBUG_OPEN 0x0100 +#define SX_DEBUG_TERMIOS 0x0200 +#define SX_DEBUG_SIGNALS 0x0400 +#define SX_DEBUG_FIFO 0x0800 + + +#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__) +#define func_exit() dprintk(SX_DEBUG_FLOW, "io8: exit %s\n", __func__) + + +/* Configurable options: */ + +/* Am I paranoid or not ? ;-) */ +#define SPECIALIX_PARANOIA_CHECK + +/* + * The following defines are mostly for testing purposes. But if you need + * some nice reporting in your syslog, you can define them also. + */ +#undef SX_REPORT_FIFO +#undef SX_REPORT_OVERRUN + + + + +#define SPECIALIX_LEGAL_FLAGS \ + (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ + ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ + ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) + +static struct tty_driver *specialix_driver; + +static struct specialix_board sx_board[SX_NBOARD] = { + { 0, SX_IOBASE1, 9, }, + { 0, SX_IOBASE2, 11, }, + { 0, SX_IOBASE3, 12, }, + { 0, SX_IOBASE4, 15, }, +}; + +static struct specialix_port sx_port[SX_NBOARD * SX_NPORT]; + + +static int sx_paranoia_check(struct specialix_port const *port, + char *name, const char *routine) +{ +#ifdef SPECIALIX_PARANOIA_CHECK + static const char *badmagic = KERN_ERR + "sx: Warning: bad specialix port magic number for device %s in %s\n"; + static const char *badinfo = KERN_ERR + "sx: Warning: null specialix port for device %s in %s\n"; + + if (!port) { + printk(badinfo, name, routine); + return 1; + } + if (port->magic != SPECIALIX_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + + +/* + * + * Service functions for specialix IO8+ driver. + * + */ + +/* Get board number from pointer */ +static inline int board_No(struct specialix_board *bp) +{ + return bp - sx_board; +} + + +/* Get port number from pointer */ +static inline int port_No(struct specialix_port const *port) +{ + return SX_PORT(port - sx_port); +} + + +/* Get pointer to board from pointer to port */ +static inline struct specialix_board *port_Board( + struct specialix_port const *port) +{ + return &sx_board[SX_BOARD(port - sx_port)]; +} + + +/* Input Byte from CL CD186x register */ +static inline unsigned char sx_in(struct specialix_board *bp, + unsigned short reg) +{ + bp->reg = reg | 0x80; + outb(reg | 0x80, bp->base + SX_ADDR_REG); + return inb(bp->base + SX_DATA_REG); +} + + +/* Output Byte to CL CD186x register */ +static inline void sx_out(struct specialix_board *bp, unsigned short reg, + unsigned char val) +{ + bp->reg = reg | 0x80; + outb(reg | 0x80, bp->base + SX_ADDR_REG); + outb(val, bp->base + SX_DATA_REG); +} + + +/* Input Byte from CL CD186x register */ +static inline unsigned char sx_in_off(struct specialix_board *bp, + unsigned short reg) +{ + bp->reg = reg; + outb(reg, bp->base + SX_ADDR_REG); + return inb(bp->base + SX_DATA_REG); +} + + +/* Output Byte to CL CD186x register */ +static inline void sx_out_off(struct specialix_board *bp, + unsigned short reg, unsigned char val) +{ + bp->reg = reg; + outb(reg, bp->base + SX_ADDR_REG); + outb(val, bp->base + SX_DATA_REG); +} + + +/* Wait for Channel Command Register ready */ +static void sx_wait_CCR(struct specialix_board *bp) +{ + unsigned long delay, flags; + unsigned char ccr; + + for (delay = SX_CCR_TIMEOUT; delay; delay--) { + spin_lock_irqsave(&bp->lock, flags); + ccr = sx_in(bp, CD186x_CCR); + spin_unlock_irqrestore(&bp->lock, flags); + if (!ccr) + return; + udelay(1); + } + + printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); +} + + +/* Wait for Channel Command Register ready */ +static void sx_wait_CCR_off(struct specialix_board *bp) +{ + unsigned long delay; + unsigned char crr; + unsigned long flags; + + for (delay = SX_CCR_TIMEOUT; delay; delay--) { + spin_lock_irqsave(&bp->lock, flags); + crr = sx_in_off(bp, CD186x_CCR); + spin_unlock_irqrestore(&bp->lock, flags); + if (!crr) + return; + udelay(1); + } + + printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); +} + + +/* + * specialix IO8+ IO range functions. + */ + +static int sx_request_io_range(struct specialix_board *bp) +{ + return request_region(bp->base, + bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE, + "specialix IO8+") == NULL; +} + + +static void sx_release_io_range(struct specialix_board *bp) +{ + release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ? + SX_PCI_IO_SPACE : SX_IO_SPACE); +} + + +/* Set the IRQ using the RTS lines that run to the PAL on the board.... */ +static int sx_set_irq(struct specialix_board *bp) +{ + int virq; + int i; + unsigned long flags; + + if (bp->flags & SX_BOARD_IS_PCI) + return 1; + switch (bp->irq) { + /* In the same order as in the docs... */ + case 15: + virq = 0; + break; + case 12: + virq = 1; + break; + case 11: + virq = 2; + break; + case 9: + virq = 3; + break; + default:printk(KERN_ERR + "Speclialix: cannot set irq to %d.\n", bp->irq); + return 0; + } + spin_lock_irqsave(&bp->lock, flags); + for (i = 0; i < 2; i++) { + sx_out(bp, CD186x_CAR, i); + sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0); + } + spin_unlock_irqrestore(&bp->lock, flags); + return 1; +} + + +/* Reset and setup CD186x chip */ +static int sx_init_CD186x(struct specialix_board *bp) +{ + unsigned long flags; + int scaler; + int rv = 1; + + func_enter(); + sx_wait_CCR_off(bp); /* Wait for CCR ready */ + spin_lock_irqsave(&bp->lock, flags); + sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */ + spin_unlock_irqrestore(&bp->lock, flags); + msleep(50); /* Delay 0.05 sec */ + spin_lock_irqsave(&bp->lock, flags); + sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */ + sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */ + sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT); /* Prio for modem intr */ + sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT); /* Prio for transmitter intr */ + sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */ + /* Set RegAckEn */ + sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN); + + /* Setting up prescaler. We need 4 ticks per 1 ms */ + scaler = SX_OSCFREQ/SPECIALIX_TPS; + + sx_out_off(bp, CD186x_PPRH, scaler >> 8); + sx_out_off(bp, CD186x_PPRL, scaler & 0xff); + spin_unlock_irqrestore(&bp->lock, flags); + + if (!sx_set_irq(bp)) { + /* Figure out how to pass this along... */ + printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq); + rv = 0; + } + + func_exit(); + return rv; +} + + +static int read_cross_byte(struct specialix_board *bp, int reg, int bit) +{ + int i; + int t; + unsigned long flags; + + spin_lock_irqsave(&bp->lock, flags); + for (i = 0, t = 0; i < 8; i++) { + sx_out_off(bp, CD186x_CAR, i); + if (sx_in_off(bp, reg) & bit) + t |= 1 << i; + } + spin_unlock_irqrestore(&bp->lock, flags); + + return t; +} + + +/* Main probing routine, also sets irq. */ +static int sx_probe(struct specialix_board *bp) +{ + unsigned char val1, val2; + int rev; + int chip; + + func_enter(); + + if (sx_request_io_range(bp)) { + func_exit(); + return 1; + } + + /* Are the I/O ports here ? */ + sx_out_off(bp, CD186x_PPRL, 0x5a); + udelay(1); + val1 = sx_in_off(bp, CD186x_PPRL); + + sx_out_off(bp, CD186x_PPRL, 0xa5); + udelay(1); + val2 = sx_in_off(bp, CD186x_PPRL); + + + if (val1 != 0x5a || val2 != 0xa5) { + printk(KERN_INFO + "sx%d: specialix IO8+ Board at 0x%03x not found.\n", + board_No(bp), bp->base); + sx_release_io_range(bp); + func_exit(); + return 1; + } + + /* Check the DSR lines that Specialix uses as board + identification */ + val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR); + val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS); + dprintk(SX_DEBUG_INIT, + "sx%d: DSR lines are: %02x, rts lines are: %02x\n", + board_No(bp), val1, val2); + + /* They managed to switch the bit order between the docs and + the IO8+ card. The new PCI card now conforms to old docs. + They changed the PCI docs to reflect the situation on the + old card. */ + val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2; + if (val1 != val2) { + printk(KERN_INFO + "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n", + board_No(bp), val2, bp->base, val1); + sx_release_io_range(bp); + func_exit(); + return 1; + } + + + /* Reset CD186x again */ + if (!sx_init_CD186x(bp)) { + sx_release_io_range(bp); + func_exit(); + return 1; + } + + sx_request_io_range(bp); + bp->flags |= SX_BOARD_PRESENT; + + /* Chip revcode pkgtype + GFRCR SRCR bit 7 + CD180 rev B 0x81 0 + CD180 rev C 0x82 0 + CD1864 rev A 0x82 1 + CD1865 rev A 0x83 1 -- Do not use!!! Does not work. + CD1865 rev B 0x84 1 + -- Thanks to Gwen Wang, Cirrus Logic. + */ + + switch (sx_in_off(bp, CD186x_GFRCR)) { + case 0x82: + chip = 1864; + rev = 'A'; + break; + case 0x83: + chip = 1865; + rev = 'A'; + break; + case 0x84: + chip = 1865; + rev = 'B'; + break; + case 0x85: + chip = 1865; + rev = 'C'; + break; /* Does not exist at this time */ + default: + chip = -1; + rev = 'x'; + } + + dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR)); + + printk(KERN_INFO + "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n", + board_No(bp), bp->base, bp->irq, chip, rev); + + func_exit(); + return 0; +} + +/* + * + * Interrupt processing routines. + * */ + +static struct specialix_port *sx_get_port(struct specialix_board *bp, + unsigned char const *what) +{ + unsigned char channel; + struct specialix_port *port = NULL; + + channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF; + dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel); + if (channel < CD186x_NCH) { + port = &sx_port[board_No(bp) * SX_NPORT + channel]; + dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n", + board_No(bp) * SX_NPORT + channel, port, + port->port.flags & ASYNC_INITIALIZED); + + if (port->port.flags & ASYNC_INITIALIZED) { + dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port); + func_exit(); + return port; + } + } + printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n", + board_No(bp), what, channel); + return NULL; +} + + +static void sx_receive_exc(struct specialix_board *bp) +{ + struct specialix_port *port; + struct tty_struct *tty; + unsigned char status; + unsigned char ch, flag; + + func_enter(); + + port = sx_get_port(bp, "Receive"); + if (!port) { + dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); + func_exit(); + return; + } + tty = port->port.tty; + + status = sx_in(bp, CD186x_RCSR); + + dprintk(SX_DEBUG_RX, "status: 0x%x\n", status); + if (status & RCSR_OE) { + port->overrun++; + dprintk(SX_DEBUG_FIFO, + "sx%d: port %d: Overrun. Total %ld overruns.\n", + board_No(bp), port_No(port), port->overrun); + } + status &= port->mark_mask; + + /* This flip buffer check needs to be below the reading of the + status register to reset the chip's IRQ.... */ + if (tty_buffer_request_room(tty, 1) == 0) { + dprintk(SX_DEBUG_FIFO, + "sx%d: port %d: Working around flip buffer overflow.\n", + board_No(bp), port_No(port)); + func_exit(); + return; + } + + ch = sx_in(bp, CD186x_RDR); + if (!status) { + func_exit(); + return; + } + if (status & RCSR_TOUT) { + printk(KERN_INFO + "sx%d: port %d: Receiver timeout. Hardware problems ?\n", + board_No(bp), port_No(port)); + func_exit(); + return; + + } else if (status & RCSR_BREAK) { + dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n", + board_No(bp), port_No(port)); + flag = TTY_BREAK; + if (port->port.flags & ASYNC_SAK) + do_SAK(tty); + + } else if (status & RCSR_PE) + flag = TTY_PARITY; + + else if (status & RCSR_FE) + flag = TTY_FRAME; + + else if (status & RCSR_OE) + flag = TTY_OVERRUN; + + else + flag = TTY_NORMAL; + + if (tty_insert_flip_char(tty, ch, flag)) + tty_flip_buffer_push(tty); + func_exit(); +} + + +static void sx_receive(struct specialix_board *bp) +{ + struct specialix_port *port; + struct tty_struct *tty; + unsigned char count; + + func_enter(); + + port = sx_get_port(bp, "Receive"); + if (port == NULL) { + dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); + func_exit(); + return; + } + tty = port->port.tty; + + count = sx_in(bp, CD186x_RDCR); + dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count); + port->hits[count > 8 ? 9 : count]++; + + while (count--) + tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL); + tty_flip_buffer_push(tty); + func_exit(); +} + + +static void sx_transmit(struct specialix_board *bp) +{ + struct specialix_port *port; + struct tty_struct *tty; + unsigned char count; + + func_enter(); + port = sx_get_port(bp, "Transmit"); + if (port == NULL) { + func_exit(); + return; + } + dprintk(SX_DEBUG_TX, "port: %p\n", port); + tty = port->port.tty; + + if (port->IER & IER_TXEMPTY) { + /* FIFO drained */ + sx_out(bp, CD186x_CAR, port_No(port)); + port->IER &= ~IER_TXEMPTY; + sx_out(bp, CD186x_IER, port->IER); + func_exit(); + return; + } + + if ((port->xmit_cnt <= 0 && !port->break_length) + || tty->stopped || tty->hw_stopped) { + sx_out(bp, CD186x_CAR, port_No(port)); + port->IER &= ~IER_TXRDY; + sx_out(bp, CD186x_IER, port->IER); + func_exit(); + return; + } + + if (port->break_length) { + if (port->break_length > 0) { + if (port->COR2 & COR2_ETC) { + sx_out(bp, CD186x_TDR, CD186x_C_ESC); + sx_out(bp, CD186x_TDR, CD186x_C_SBRK); + port->COR2 &= ~COR2_ETC; + } + count = min_t(int, port->break_length, 0xff); + sx_out(bp, CD186x_TDR, CD186x_C_ESC); + sx_out(bp, CD186x_TDR, CD186x_C_DELAY); + sx_out(bp, CD186x_TDR, count); + port->break_length -= count; + if (port->break_length == 0) + port->break_length--; + } else { + sx_out(bp, CD186x_TDR, CD186x_C_ESC); + sx_out(bp, CD186x_TDR, CD186x_C_EBRK); + sx_out(bp, CD186x_COR2, port->COR2); + sx_wait_CCR(bp); + sx_out(bp, CD186x_CCR, CCR_CORCHG2); + port->break_length = 0; + } + + func_exit(); + return; + } + + count = CD186x_NFIFO; + do { + sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]); + port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); + if (--port->xmit_cnt <= 0) + break; + } while (--count > 0); + + if (port->xmit_cnt <= 0) { + sx_out(bp, CD186x_CAR, port_No(port)); + port->IER &= ~IER_TXRDY; + sx_out(bp, CD186x_IER, port->IER); + } + if (port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); + + func_exit(); +} + + +static void sx_check_modem(struct specialix_board *bp) +{ + struct specialix_port *port; + struct tty_struct *tty; + unsigned char mcr; + int msvr_cd; + + dprintk(SX_DEBUG_SIGNALS, "Modem intr. "); + port = sx_get_port(bp, "Modem"); + if (port == NULL) + return; + + tty = port->port.tty; + + mcr = sx_in(bp, CD186x_MCR); + + if ((mcr & MCR_CDCHG)) { + dprintk(SX_DEBUG_SIGNALS, "CD just changed... "); + msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD; + if (msvr_cd) { + dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n"); + wake_up_interruptible(&port->port.open_wait); + } else { + dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n"); + tty_hangup(tty); + } + } + +#ifdef SPECIALIX_BRAIN_DAMAGED_CTS + if (mcr & MCR_CTSCHG) { + if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) { + tty->hw_stopped = 0; + port->IER |= IER_TXRDY; + if (port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); + } else { + tty->hw_stopped = 1; + port->IER &= ~IER_TXRDY; + } + sx_out(bp, CD186x_IER, port->IER); + } + if (mcr & MCR_DSSXHG) { + if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) { + tty->hw_stopped = 0; + port->IER |= IER_TXRDY; + if (port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); + } else { + tty->hw_stopped = 1; + port->IER &= ~IER_TXRDY; + } + sx_out(bp, CD186x_IER, port->IER); + } +#endif /* SPECIALIX_BRAIN_DAMAGED_CTS */ + + /* Clear change bits */ + sx_out(bp, CD186x_MCR, 0); +} + + +/* The main interrupt processing routine */ +static irqreturn_t sx_interrupt(int dummy, void *dev_id) +{ + unsigned char status; + unsigned char ack; + struct specialix_board *bp = dev_id; + unsigned long loop = 0; + int saved_reg; + unsigned long flags; + + func_enter(); + + spin_lock_irqsave(&bp->lock, flags); + + dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, + port_No(sx_get_port(bp, "INT")), + SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1); + if (!(bp->flags & SX_BOARD_ACTIVE)) { + dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", + bp->irq); + spin_unlock_irqrestore(&bp->lock, flags); + func_exit(); + return IRQ_NONE; + } + + saved_reg = bp->reg; + + while (++loop < 16) { + status = sx_in(bp, CD186x_SRSR) & + (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint); + if (status == 0) + break; + if (status & SRSR_RREQint) { + ack = sx_in(bp, CD186x_RRAR); + + if (ack == (SX_ID | GIVR_IT_RCV)) + sx_receive(bp); + else if (ack == (SX_ID | GIVR_IT_REXC)) + sx_receive_exc(bp); + else + printk(KERN_ERR + "sx%d: status: 0x%x Bad receive ack 0x%02x.\n", + board_No(bp), status, ack); + + } else if (status & SRSR_TREQint) { + ack = sx_in(bp, CD186x_TRAR); + + if (ack == (SX_ID | GIVR_IT_TX)) + sx_transmit(bp); + else + printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n", + board_No(bp), status, ack, + port_No(sx_get_port(bp, "Int"))); + } else if (status & SRSR_MREQint) { + ack = sx_in(bp, CD186x_MRAR); + + if (ack == (SX_ID | GIVR_IT_MODEM)) + sx_check_modem(bp); + else + printk(KERN_ERR + "sx%d: status: 0x%x Bad modem ack 0x%02x.\n", + board_No(bp), status, ack); + + } + + sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */ + } + bp->reg = saved_reg; + outb(bp->reg, bp->base + SX_ADDR_REG); + spin_unlock_irqrestore(&bp->lock, flags); + func_exit(); + return IRQ_HANDLED; +} + + +/* + * Routines for open & close processing. + */ + +static void turn_ints_off(struct specialix_board *bp) +{ + unsigned long flags; + + func_enter(); + spin_lock_irqsave(&bp->lock, flags); + (void) sx_in_off(bp, 0); /* Turn off interrupts. */ + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + +static void turn_ints_on(struct specialix_board *bp) +{ + unsigned long flags; + + func_enter(); + + spin_lock_irqsave(&bp->lock, flags); + (void) sx_in(bp, 0); /* Turn ON interrupts. */ + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + + +/* Called with disabled interrupts */ +static int sx_setup_board(struct specialix_board *bp) +{ + int error; + + if (bp->flags & SX_BOARD_ACTIVE) + return 0; + + if (bp->flags & SX_BOARD_IS_PCI) + error = request_irq(bp->irq, sx_interrupt, + IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp); + else + error = request_irq(bp->irq, sx_interrupt, + IRQF_DISABLED, "specialix IO8+", bp); + + if (error) + return error; + + turn_ints_on(bp); + bp->flags |= SX_BOARD_ACTIVE; + + return 0; +} + + +/* Called with disabled interrupts */ +static void sx_shutdown_board(struct specialix_board *bp) +{ + func_enter(); + + if (!(bp->flags & SX_BOARD_ACTIVE)) { + func_exit(); + return; + } + + bp->flags &= ~SX_BOARD_ACTIVE; + + dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n", + bp->irq, board_No(bp)); + free_irq(bp->irq, bp); + turn_ints_off(bp); + func_exit(); +} + +static unsigned int sx_crtscts(struct tty_struct *tty) +{ + if (sx_rtscts) + return C_CRTSCTS(tty); + return 1; +} + +/* + * Setting up port characteristics. + * Must be called with disabled interrupts + */ +static void sx_change_speed(struct specialix_board *bp, + struct specialix_port *port) +{ + struct tty_struct *tty; + unsigned long baud; + long tmp; + unsigned char cor1 = 0, cor3 = 0; + unsigned char mcor1 = 0, mcor2 = 0; + static unsigned long again; + unsigned long flags; + + func_enter(); + + tty = port->port.tty; + if (!tty || !tty->termios) { + func_exit(); + return; + } + + port->IER = 0; + port->COR2 = 0; + /* Select port on the board */ + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + + /* The Specialix board doens't implement the RTS lines. + They are used to set the IRQ level. Don't touch them. */ + if (sx_crtscts(tty)) + port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); + else + port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS); + spin_unlock_irqrestore(&bp->lock, flags); + dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR); + baud = tty_get_baud_rate(tty); + + if (baud == 38400) { + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + baud = 57600; + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + baud = 115200; + } + + if (!baud) { + /* Drop DTR & exit */ + dprintk(SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n"); + if (!sx_crtscts(tty)) { + port->MSVR &= ~MSVR_DTR; + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock_irqrestore(&bp->lock, flags); + } else + dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n"); + return; + } else { + /* Set DTR on */ + if (!sx_crtscts(tty)) + port->MSVR |= MSVR_DTR; + } + + /* + * Now we must calculate some speed depended things + */ + + /* Set baud rate for port */ + tmp = port->custom_divisor ; + if (tmp) + printk(KERN_INFO + "sx%d: Using custom baud rate divisor %ld. \n" + "This is an untested option, please be careful.\n", + port_No(port), tmp); + else + tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) / + CD186x_TPC); + + if (tmp < 0x10 && time_before(again, jiffies)) { + again = jiffies + HZ * 60; + /* Page 48 of version 2.0 of the CL-CD1865 databook */ + if (tmp >= 12) { + printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" + "Performance degradation is possible.\n" + "Read specialix.txt for more info.\n", + port_No(port), tmp); + } else { + printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" + "Warning: overstressing Cirrus chip. This might not work.\n" + "Read specialix.txt for more info.\n", port_No(port), tmp); + } + } + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff); + sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff); + sx_out(bp, CD186x_RBPRL, tmp & 0xff); + sx_out(bp, CD186x_TBPRL, tmp & 0xff); + spin_unlock_irqrestore(&bp->lock, flags); + if (port->custom_divisor) + baud = (SX_OSCFREQ + port->custom_divisor/2) / + port->custom_divisor; + baud = (baud + 5) / 10; /* Estimated CPS */ + + /* Two timer ticks seems enough to wakeup something like SLIP driver */ + tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; + port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? + SERIAL_XMIT_SIZE - 1 : tmp); + + /* Receiver timeout will be transmission time for 1.5 chars */ + tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud; + tmp = (tmp > 0xff) ? 0xff : tmp; + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_RTPR, tmp); + spin_unlock_irqrestore(&bp->lock, flags); + switch (C_CSIZE(tty)) { + case CS5: + cor1 |= COR1_5BITS; + break; + case CS6: + cor1 |= COR1_6BITS; + break; + case CS7: + cor1 |= COR1_7BITS; + break; + case CS8: + cor1 |= COR1_8BITS; + break; + } + + if (C_CSTOPB(tty)) + cor1 |= COR1_2SB; + + cor1 |= COR1_IGNORE; + if (C_PARENB(tty)) { + cor1 |= COR1_NORMPAR; + if (C_PARODD(tty)) + cor1 |= COR1_ODDP; + if (I_INPCK(tty)) + cor1 &= ~COR1_IGNORE; + } + /* Set marking of some errors */ + port->mark_mask = RCSR_OE | RCSR_TOUT; + if (I_INPCK(tty)) + port->mark_mask |= RCSR_FE | RCSR_PE; + if (I_BRKINT(tty) || I_PARMRK(tty)) + port->mark_mask |= RCSR_BREAK; + if (I_IGNPAR(tty)) + port->mark_mask &= ~(RCSR_FE | RCSR_PE); + if (I_IGNBRK(tty)) { + port->mark_mask &= ~RCSR_BREAK; + if (I_IGNPAR(tty)) + /* Real raw mode. Ignore all */ + port->mark_mask &= ~RCSR_OE; + } + /* Enable Hardware Flow Control */ + if (C_CRTSCTS(tty)) { +#ifdef SPECIALIX_BRAIN_DAMAGED_CTS + port->IER |= IER_DSR | IER_CTS; + mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; + mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; + spin_lock_irqsave(&bp->lock, flags); + tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & + (MSVR_CTS|MSVR_DSR)); + spin_unlock_irqrestore(&bp->lock, flags); +#else + port->COR2 |= COR2_CTSAE; +#endif + } + /* Enable Software Flow Control. FIXME: I'm not sure about this */ + /* Some people reported that it works, but I still doubt it */ + if (I_IXON(tty)) { + port->COR2 |= COR2_TXIBE; + cor3 |= (COR3_FCT | COR3_SCDE); + if (I_IXANY(tty)) + port->COR2 |= COR2_IXM; + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_SCHR1, START_CHAR(tty)); + sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty)); + sx_out(bp, CD186x_SCHR3, START_CHAR(tty)); + sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty)); + spin_unlock_irqrestore(&bp->lock, flags); + } + if (!C_CLOCAL(tty)) { + /* Enable CD check */ + port->IER |= IER_CD; + mcor1 |= MCOR1_CDZD; + mcor2 |= MCOR2_CDOD; + } + + if (C_CREAD(tty)) + /* Enable receiver */ + port->IER |= IER_RXD; + + /* Set input FIFO size (1-8 bytes) */ + cor3 |= sx_rxfifo; + /* Setting up CD186x channel registers */ + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_COR1, cor1); + sx_out(bp, CD186x_COR2, port->COR2); + sx_out(bp, CD186x_COR3, cor3); + spin_unlock_irqrestore(&bp->lock, flags); + /* Make CD186x know about registers change */ + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); + /* Setting up modem option registers */ + dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", + mcor1, mcor2); + sx_out(bp, CD186x_MCOR1, mcor1); + sx_out(bp, CD186x_MCOR2, mcor2); + spin_unlock_irqrestore(&bp->lock, flags); + /* Enable CD186x transmitter & receiver */ + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN); + /* Enable interrupts */ + sx_out(bp, CD186x_IER, port->IER); + /* And finally set the modem lines... */ + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + + +/* Must be called with interrupts enabled */ +static int sx_setup_port(struct specialix_board *bp, + struct specialix_port *port) +{ + unsigned long flags; + + func_enter(); + + if (port->port.flags & ASYNC_INITIALIZED) { + func_exit(); + return 0; + } + + if (!port->xmit_buf) { + /* We may sleep in get_zeroed_page() */ + unsigned long tmp; + + tmp = get_zeroed_page(GFP_KERNEL); + if (tmp == 0L) { + func_exit(); + return -ENOMEM; + } + + if (port->xmit_buf) { + free_page(tmp); + func_exit(); + return -ERESTARTSYS; + } + port->xmit_buf = (unsigned char *) tmp; + } + + spin_lock_irqsave(&port->lock, flags); + + if (port->port.tty) + clear_bit(TTY_IO_ERROR, &port->port.tty->flags); + + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + sx_change_speed(bp, port); + port->port.flags |= ASYNC_INITIALIZED; + + spin_unlock_irqrestore(&port->lock, flags); + + + func_exit(); + return 0; +} + + +/* Must be called with interrupts disabled */ +static void sx_shutdown_port(struct specialix_board *bp, + struct specialix_port *port) +{ + struct tty_struct *tty; + int i; + unsigned long flags; + + func_enter(); + + if (!(port->port.flags & ASYNC_INITIALIZED)) { + func_exit(); + return; + } + + if (sx_debug & SX_DEBUG_FIFO) { + dprintk(SX_DEBUG_FIFO, + "sx%d: port %d: %ld overruns, FIFO hits [ ", + board_No(bp), port_No(port), port->overrun); + for (i = 0; i < 10; i++) + dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]); + dprintk(SX_DEBUG_FIFO, "].\n"); + } + + if (port->xmit_buf) { + free_page((unsigned long) port->xmit_buf); + port->xmit_buf = NULL; + } + + /* Select port */ + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + + tty = port->port.tty; + if (tty == NULL || C_HUPCL(tty)) { + /* Drop DTR */ + sx_out(bp, CD186x_MSVDTR, 0); + } + spin_unlock_irqrestore(&bp->lock, flags); + /* Reset port */ + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_SOFTRESET); + /* Disable all interrupts from this port */ + port->IER = 0; + sx_out(bp, CD186x_IER, port->IER); + spin_unlock_irqrestore(&bp->lock, flags); + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); + port->port.flags &= ~ASYNC_INITIALIZED; + + if (!bp->count) + sx_shutdown_board(bp); + func_exit(); +} + + +static int block_til_ready(struct tty_struct *tty, struct file *filp, + struct specialix_port *port) +{ + DECLARE_WAITQUEUE(wait, current); + struct specialix_board *bp = port_Board(port); + int retval; + int do_clocal = 0; + int CD; + unsigned long flags; + + func_enter(); + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->port.close_wait); + if (port->port.flags & ASYNC_HUP_NOTIFY) { + func_exit(); + return -EAGAIN; + } else { + func_exit(); + return -ERESTARTSYS; + } + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + port->port.flags |= ASYNC_NORMAL_ACTIVE; + func_exit(); + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&port->port.open_wait, &wait); + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->port.count--; + spin_unlock_irqrestore(&port->lock, flags); + port->port.blocked_open++; + while (1) { + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + CD = sx_in(bp, CD186x_MSVR) & MSVR_CD; + if (sx_crtscts(tty)) { + /* Activate RTS */ + port->MSVR |= MSVR_DTR; /* WTF? */ + sx_out(bp, CD186x_MSVR, port->MSVR); + } else { + /* Activate DTR */ + port->MSVR |= MSVR_DTR; + sx_out(bp, CD186x_MSVR, port->MSVR); + } + spin_unlock_irqrestore(&bp->lock, flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(port->port.flags & ASYNC_INITIALIZED)) { + if (port->port.flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + if (!(port->port.flags & ASYNC_CLOSING) && + (do_clocal || CD)) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + tty_unlock(); + schedule(); + tty_lock(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->port.open_wait, &wait); + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->port.count++; + port->port.blocked_open--; + spin_unlock_irqrestore(&port->lock, flags); + if (retval) { + func_exit(); + return retval; + } + + port->port.flags |= ASYNC_NORMAL_ACTIVE; + func_exit(); + return 0; +} + + +static int sx_open(struct tty_struct *tty, struct file *filp) +{ + int board; + int error; + struct specialix_port *port; + struct specialix_board *bp; + int i; + unsigned long flags; + + func_enter(); + + board = SX_BOARD(tty->index); + + if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) { + func_exit(); + return -ENODEV; + } + + bp = &sx_board[board]; + port = sx_port + board * SX_NPORT + SX_PORT(tty->index); + port->overrun = 0; + for (i = 0; i < 10; i++) + port->hits[i] = 0; + + dprintk(SX_DEBUG_OPEN, + "Board = %d, bp = %p, port = %p, portno = %d.\n", + board, bp, port, SX_PORT(tty->index)); + + if (sx_paranoia_check(port, tty->name, "sx_open")) { + func_enter(); + return -ENODEV; + } + + error = sx_setup_board(bp); + if (error) { + func_exit(); + return error; + } + + spin_lock_irqsave(&bp->lock, flags); + port->port.count++; + bp->count++; + tty->driver_data = port; + port->port.tty = tty; + spin_unlock_irqrestore(&bp->lock, flags); + + error = sx_setup_port(bp, port); + if (error) { + func_enter(); + return error; + } + + error = block_til_ready(tty, filp, port); + if (error) { + func_enter(); + return error; + } + + func_exit(); + return 0; +} + +static void sx_flush_buffer(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) { + func_exit(); + return; + } + + bp = port_Board(port); + spin_lock_irqsave(&port->lock, flags); + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + spin_unlock_irqrestore(&port->lock, flags); + tty_wakeup(tty); + + func_exit(); +} + +static void sx_close(struct tty_struct *tty, struct file *filp) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + unsigned long timeout; + + func_enter(); + if (!port || sx_paranoia_check(port, tty->name, "close")) { + func_exit(); + return; + } + spin_lock_irqsave(&port->lock, flags); + + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); + func_exit(); + return; + } + + bp = port_Board(port); + if (tty->count == 1 && port->port.count != 1) { + printk(KERN_ERR "sx%d: sx_close: bad port count;" + " tty->count is 1, port count is %d\n", + board_No(bp), port->port.count); + port->port.count = 1; + } + + if (port->port.count > 1) { + port->port.count--; + bp->count--; + + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); + return; + } + port->port.flags |= ASYNC_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); + dprintk(SX_DEBUG_OPEN, "Closing\n"); + if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, port->port.closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + dprintk(SX_DEBUG_OPEN, "Closed\n"); + port->IER &= ~IER_RXD; + if (port->port.flags & ASYNC_INITIALIZED) { + port->IER &= ~IER_TXRDY; + port->IER |= IER_TXEMPTY; + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_IER, port->IER); + spin_unlock_irqrestore(&bp->lock, flags); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies+HZ; + while (port->IER & IER_TXEMPTY) { + set_current_state(TASK_INTERRUPTIBLE); + msleep_interruptible(jiffies_to_msecs(port->timeout)); + if (time_after(jiffies, timeout)) { + printk(KERN_INFO "Timeout waiting for close\n"); + break; + } + } + + } + + if (--bp->count < 0) { + printk(KERN_ERR + "sx%d: sx_shutdown_port: bad board count: %d port: %d\n", + board_No(bp), bp->count, tty->index); + bp->count = 0; + } + if (--port->port.count < 0) { + printk(KERN_ERR + "sx%d: sx_close: bad port count for tty%d: %d\n", + board_No(bp), port_No(port), port->port.count); + port->port.count = 0; + } + + sx_shutdown_port(bp, port); + sx_flush_buffer(tty); + tty_ldisc_flush(tty); + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; + port->port.tty = NULL; + spin_unlock_irqrestore(&port->lock, flags); + if (port->port.blocked_open) { + if (port->port.close_delay) + msleep_interruptible( + jiffies_to_msecs(port->port.close_delay)); + wake_up_interruptible(&port->port.open_wait); + } + port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&port->port.close_wait); + + func_exit(); +} + + +static int sx_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + int c, total = 0; + unsigned long flags; + + func_enter(); + if (sx_paranoia_check(port, tty->name, "sx_write")) { + func_exit(); + return 0; + } + + bp = port_Board(port); + + if (!port->xmit_buf) { + func_exit(); + return 0; + } + + while (1) { + spin_lock_irqsave(&port->lock, flags); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, + SERIAL_XMIT_SIZE - port->xmit_head)); + if (c <= 0) { + spin_unlock_irqrestore(&port->lock, flags); + break; + } + memcpy(port->xmit_buf + port->xmit_head, buf, c); + port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + port->xmit_cnt += c; + spin_unlock_irqrestore(&port->lock, flags); + + buf += c; + count -= c; + total += c; + } + + spin_lock_irqsave(&bp->lock, flags); + if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && + !(port->IER & IER_TXRDY)) { + port->IER |= IER_TXRDY; + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_IER, port->IER); + } + spin_unlock_irqrestore(&bp->lock, flags); + func_exit(); + + return total; +} + + +static int sx_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_put_char")) { + func_exit(); + return 0; + } + dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf); + if (!port->xmit_buf) { + func_exit(); + return 0; + } + bp = port_Board(port); + spin_lock_irqsave(&port->lock, flags); + + dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", + port->xmit_cnt, port->xmit_buf); + if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) { + spin_unlock_irqrestore(&port->lock, flags); + dprintk(SX_DEBUG_TX, "Exit size\n"); + func_exit(); + return 0; + } + dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf); + port->xmit_buf[port->xmit_head++] = ch; + port->xmit_head &= SERIAL_XMIT_SIZE - 1; + port->xmit_cnt++; + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); + return 1; +} + + +static void sx_flush_chars(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp = port_Board(port); + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) { + func_exit(); + return; + } + if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !port->xmit_buf) { + func_exit(); + return; + } + spin_lock_irqsave(&bp->lock, flags); + port->IER |= IER_TXRDY; + sx_out(port_Board(port), CD186x_CAR, port_No(port)); + sx_out(port_Board(port), CD186x_IER, port->IER); + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + + +static int sx_write_room(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + int ret; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_write_room")) { + func_exit(); + return 0; + } + + ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; + if (ret < 0) + ret = 0; + + func_exit(); + return ret; +} + + +static int sx_chars_in_buffer(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) { + func_exit(); + return 0; + } + func_exit(); + return port->xmit_cnt; +} + +static int sx_tiocmget(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned char status; + unsigned int result; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, __func__)) { + func_exit(); + return -ENODEV; + } + + bp = port_Board(port); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + status = sx_in(bp, CD186x_MSVR); + spin_unlock_irqrestore(&bp->lock, flags); + dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n", + port_No(port), status, sx_in(bp, CD186x_CAR)); + dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port); + if (sx_crtscts(port->port.tty)) { + result = TIOCM_DTR | TIOCM_DSR + | ((status & MSVR_DTR) ? TIOCM_RTS : 0) + | ((status & MSVR_CD) ? TIOCM_CAR : 0) + | ((status & MSVR_CTS) ? TIOCM_CTS : 0); + } else { + result = TIOCM_RTS | TIOCM_DSR + | ((status & MSVR_DTR) ? TIOCM_DTR : 0) + | ((status & MSVR_CD) ? TIOCM_CAR : 0) + | ((status & MSVR_CTS) ? TIOCM_CTS : 0); + } + + func_exit(); + + return result; +} + + +static int sx_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, __func__)) { + func_exit(); + return -ENODEV; + } + + bp = port_Board(port); + + spin_lock_irqsave(&port->lock, flags); + if (sx_crtscts(port->port.tty)) { + if (set & TIOCM_RTS) + port->MSVR |= MSVR_DTR; + } else { + if (set & TIOCM_DTR) + port->MSVR |= MSVR_DTR; + } + if (sx_crtscts(port->port.tty)) { + if (clear & TIOCM_RTS) + port->MSVR &= ~MSVR_DTR; + } else { + if (clear & TIOCM_DTR) + port->MSVR &= ~MSVR_DTR; + } + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock(&bp->lock); + spin_unlock_irqrestore(&port->lock, flags); + func_exit(); + return 0; +} + + +static int sx_send_break(struct tty_struct *tty, int length) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp = port_Board(port); + unsigned long flags; + + func_enter(); + if (length == 0 || length == -1) + return -EOPNOTSUPP; + + spin_lock_irqsave(&port->lock, flags); + port->break_length = SPECIALIX_TPS / HZ * length; + port->COR2 |= COR2_ETC; + port->IER |= IER_TXRDY; + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_COR2, port->COR2); + sx_out(bp, CD186x_IER, port->IER); + spin_unlock(&bp->lock); + spin_unlock_irqrestore(&port->lock, flags); + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_CORCHG2); + spin_unlock_irqrestore(&bp->lock, flags); + sx_wait_CCR(bp); + + func_exit(); + return 0; +} + + +static int sx_set_serial_info(struct specialix_port *port, + struct serial_struct __user *newinfo) +{ + struct serial_struct tmp; + struct specialix_board *bp = port_Board(port); + int change_speed; + + func_enter(); + + if (copy_from_user(&tmp, newinfo, sizeof(tmp))) { + func_enter(); + return -EFAULT; + } + + mutex_lock(&port->port.mutex); + change_speed = ((port->port.flags & ASYNC_SPD_MASK) != + (tmp.flags & ASYNC_SPD_MASK)); + change_speed |= (tmp.custom_divisor != port->custom_divisor); + + if (!capable(CAP_SYS_ADMIN)) { + if ((tmp.close_delay != port->port.close_delay) || + (tmp.closing_wait != port->port.closing_wait) || + ((tmp.flags & ~ASYNC_USR_MASK) != + (port->port.flags & ~ASYNC_USR_MASK))) { + func_exit(); + mutex_unlock(&port->port.mutex); + return -EPERM; + } + port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | + (tmp.flags & ASYNC_USR_MASK)); + port->custom_divisor = tmp.custom_divisor; + } else { + port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | + (tmp.flags & ASYNC_FLAGS)); + port->port.close_delay = tmp.close_delay; + port->port.closing_wait = tmp.closing_wait; + port->custom_divisor = tmp.custom_divisor; + } + if (change_speed) + sx_change_speed(bp, port); + + func_exit(); + mutex_unlock(&port->port.mutex); + return 0; +} + + +static int sx_get_serial_info(struct specialix_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + struct specialix_board *bp = port_Board(port); + + func_enter(); + + memset(&tmp, 0, sizeof(tmp)); + mutex_lock(&port->port.mutex); + tmp.type = PORT_CIRRUS; + tmp.line = port - sx_port; + tmp.port = bp->base; + tmp.irq = bp->irq; + tmp.flags = port->port.flags; + tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC; + tmp.close_delay = port->port.close_delay * HZ/100; + tmp.closing_wait = port->port.closing_wait * HZ/100; + tmp.custom_divisor = port->custom_divisor; + tmp.xmit_fifo_size = CD186x_NFIFO; + mutex_unlock(&port->port.mutex); + if (copy_to_user(retinfo, &tmp, sizeof(tmp))) { + func_exit(); + return -EFAULT; + } + + func_exit(); + return 0; +} + + +static int sx_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct specialix_port *port = tty->driver_data; + void __user *argp = (void __user *)arg; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_ioctl")) { + func_exit(); + return -ENODEV; + } + + switch (cmd) { + case TIOCGSERIAL: + func_exit(); + return sx_get_serial_info(port, argp); + case TIOCSSERIAL: + func_exit(); + return sx_set_serial_info(port, argp); + default: + func_exit(); + return -ENOIOCTLCMD; + } + func_exit(); + return 0; +} + + +static void sx_throttle(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_throttle")) { + func_exit(); + return; + } + + bp = port_Board(port); + + /* Use DTR instead of RTS ! */ + if (sx_crtscts(tty)) + port->MSVR &= ~MSVR_DTR; + else { + /* Auch!!! I think the system shouldn't call this then. */ + /* Or maybe we're supposed (allowed?) to do our side of hw + handshake anyway, even when hardware handshake is off. + When you see this in your logs, please report.... */ + printk(KERN_ERR + "sx%d: Need to throttle, but can't (hardware hs is off)\n", + port_No(port)); + } + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + spin_unlock_irqrestore(&bp->lock, flags); + if (I_IXOFF(tty)) { + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_SSCH2); + spin_unlock_irqrestore(&bp->lock, flags); + sx_wait_CCR(bp); + } + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + + +static void sx_unthrottle(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) { + func_exit(); + return; + } + + bp = port_Board(port); + + spin_lock_irqsave(&port->lock, flags); + /* XXXX Use DTR INSTEAD???? */ + if (sx_crtscts(tty)) + port->MSVR |= MSVR_DTR; + /* Else clause: see remark in "sx_throttle"... */ + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + spin_unlock(&bp->lock); + if (I_IXOFF(tty)) { + spin_unlock_irqrestore(&port->lock, flags); + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_SSCH1); + spin_unlock_irqrestore(&bp->lock, flags); + sx_wait_CCR(bp); + spin_lock_irqsave(&port->lock, flags); + } + spin_lock(&bp->lock); + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock(&bp->lock); + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); +} + + +static void sx_stop(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_stop")) { + func_exit(); + return; + } + + bp = port_Board(port); + + spin_lock_irqsave(&port->lock, flags); + port->IER &= ~IER_TXRDY; + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_IER, port->IER); + spin_unlock(&bp->lock); + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); +} + + +static void sx_start(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_start")) { + func_exit(); + return; + } + + bp = port_Board(port); + + spin_lock_irqsave(&port->lock, flags); + if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { + port->IER |= IER_TXRDY; + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_IER, port->IER); + spin_unlock(&bp->lock); + } + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); +} + +static void sx_hangup(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_hangup")) { + func_exit(); + return; + } + + bp = port_Board(port); + + sx_shutdown_port(bp, port); + spin_lock_irqsave(&port->lock, flags); + bp->count -= port->port.count; + if (bp->count < 0) { + printk(KERN_ERR + "sx%d: sx_hangup: bad board count: %d port: %d\n", + board_No(bp), bp->count, tty->index); + bp->count = 0; + } + port->port.count = 0; + port->port.flags &= ~ASYNC_NORMAL_ACTIVE; + port->port.tty = NULL; + spin_unlock_irqrestore(&port->lock, flags); + wake_up_interruptible(&port->port.open_wait); + + func_exit(); +} + + +static void sx_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp; + + if (sx_paranoia_check(port, tty->name, "sx_set_termios")) + return; + + bp = port_Board(port); + spin_lock_irqsave(&port->lock, flags); + sx_change_speed(port_Board(port), port); + spin_unlock_irqrestore(&port->lock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + sx_start(tty); + } +} + +static const struct tty_operations sx_ops = { + .open = sx_open, + .close = sx_close, + .write = sx_write, + .put_char = sx_put_char, + .flush_chars = sx_flush_chars, + .write_room = sx_write_room, + .chars_in_buffer = sx_chars_in_buffer, + .flush_buffer = sx_flush_buffer, + .ioctl = sx_ioctl, + .throttle = sx_throttle, + .unthrottle = sx_unthrottle, + .set_termios = sx_set_termios, + .stop = sx_stop, + .start = sx_start, + .hangup = sx_hangup, + .tiocmget = sx_tiocmget, + .tiocmset = sx_tiocmset, + .break_ctl = sx_send_break, +}; + +static int sx_init_drivers(void) +{ + int error; + int i; + + func_enter(); + + specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT); + if (!specialix_driver) { + printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n"); + func_exit(); + return 1; + } + + specialix_driver->owner = THIS_MODULE; + specialix_driver->name = "ttyW"; + specialix_driver->major = SPECIALIX_NORMAL_MAJOR; + specialix_driver->type = TTY_DRIVER_TYPE_SERIAL; + specialix_driver->subtype = SERIAL_TYPE_NORMAL; + specialix_driver->init_termios = tty_std_termios; + specialix_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + specialix_driver->init_termios.c_ispeed = 9600; + specialix_driver->init_termios.c_ospeed = 9600; + specialix_driver->flags = TTY_DRIVER_REAL_RAW | + TTY_DRIVER_HARDWARE_BREAK; + tty_set_operations(specialix_driver, &sx_ops); + + error = tty_register_driver(specialix_driver); + if (error) { + put_tty_driver(specialix_driver); + printk(KERN_ERR + "sx: Couldn't register specialix IO8+ driver, error = %d\n", + error); + func_exit(); + return 1; + } + memset(sx_port, 0, sizeof(sx_port)); + for (i = 0; i < SX_NPORT * SX_NBOARD; i++) { + sx_port[i].magic = SPECIALIX_MAGIC; + tty_port_init(&sx_port[i].port); + spin_lock_init(&sx_port[i].lock); + } + + func_exit(); + return 0; +} + +static void sx_release_drivers(void) +{ + func_enter(); + + tty_unregister_driver(specialix_driver); + put_tty_driver(specialix_driver); + func_exit(); +} + +/* + * This routine must be called by kernel at boot time + */ +static int __init specialix_init(void) +{ + int i; + int found = 0; + + func_enter(); + + printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n"); + printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n"); + if (sx_rtscts) + printk(KERN_INFO + "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); + else + printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n"); + + for (i = 0; i < SX_NBOARD; i++) + spin_lock_init(&sx_board[i].lock); + + if (sx_init_drivers()) { + func_exit(); + return -EIO; + } + + for (i = 0; i < SX_NBOARD; i++) + if (sx_board[i].base && !sx_probe(&sx_board[i])) + found++; + +#ifdef CONFIG_PCI + { + struct pci_dev *pdev = NULL; + + i = 0; + while (i < SX_NBOARD) { + if (sx_board[i].flags & SX_BOARD_PRESENT) { + i++; + continue; + } + pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, + PCI_DEVICE_ID_SPECIALIX_IO8, pdev); + if (!pdev) + break; + + if (pci_enable_device(pdev)) + continue; + + sx_board[i].irq = pdev->irq; + + sx_board[i].base = pci_resource_start(pdev, 2); + + sx_board[i].flags |= SX_BOARD_IS_PCI; + if (!sx_probe(&sx_board[i])) + found++; + } + /* May exit pci_get sequence early with lots of boards */ + if (pdev != NULL) + pci_dev_put(pdev); + } +#endif + + if (!found) { + sx_release_drivers(); + printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n"); + func_exit(); + return -EIO; + } + + func_exit(); + return 0; +} + +static int iobase[SX_NBOARD] = {0,}; +static int irq[SX_NBOARD] = {0,}; + +module_param_array(iobase, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +module_param(sx_debug, int, 0); +module_param(sx_rtscts, int, 0); +module_param(sx_rxfifo, int, 0); + +/* + * You can setup up to 4 boards. + * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter. + * You should specify the IRQs too in that case "irq=....,...". + * + * More than 4 boards in one computer is not possible, as the card can + * only use 4 different interrupts. + * + */ +static int __init specialix_init_module(void) +{ + int i; + + func_enter(); + + if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) { + for (i = 0; i < SX_NBOARD; i++) { + sx_board[i].base = iobase[i]; + sx_board[i].irq = irq[i]; + sx_board[i].count = 0; + } + } + + func_exit(); + + return specialix_init(); +} + +static void __exit specialix_exit_module(void) +{ + int i; + + func_enter(); + + sx_release_drivers(); + for (i = 0; i < SX_NBOARD; i++) + if (sx_board[i].flags & SX_BOARD_PRESENT) + sx_release_io_range(&sx_board[i]); + func_exit(); +} + +static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = { + { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) }, + { } +}; +MODULE_DEVICE_TABLE(pci, specialx_pci_tbl); + +module_init(specialix_init_module); +module_exit(specialix_exit_module); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR); diff --git a/drivers/staging/tty/specialix_io8.h b/drivers/staging/tty/specialix_io8.h new file mode 100644 index 000000000000..c63005274d9b --- /dev/null +++ b/drivers/staging/tty/specialix_io8.h @@ -0,0 +1,140 @@ +/* + * linux/drivers/char/specialix_io8.h -- + * Specialix IO8+ multiport serial driver. + * + * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) + * + * + * Specialix pays for the development and support of this driver. + * Please DO contact io8-linux@specialix.co.uk if you require + * support. + * + * This driver was developped in the BitWizard linux device + * driver service. If you require a linux device driver for your + * product, please contact devices@BitWizard.nl for a quote. + * + * This code is firmly based on the riscom/8 serial driver, + * written by Dmitry Gorodchanin. The specialix IO8+ card + * programming information was obtained from the CL-CD1865 Data + * Book, and Specialix document number 6200059: IO8+ Hardware + * Functional Specification. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + * USA. + * */ + +#ifndef __LINUX_SPECIALIX_H +#define __LINUX_SPECIALIX_H + +#include + +#ifdef __KERNEL__ + +/* You can have max 4 ISA cards in one PC, and I recommend not much +more than a few PCI versions of the card. */ + +#define SX_NBOARD 8 + +/* NOTE: Specialix decoder recognizes 4 addresses, but only two are used.... */ +#define SX_IO_SPACE 4 +/* The PCI version decodes 8 addresses, but still only 2 are used. */ +#define SX_PCI_IO_SPACE 8 + +/* eight ports per board. */ +#define SX_NPORT 8 +#define SX_BOARD(line) ((line) / SX_NPORT) +#define SX_PORT(line) ((line) & (SX_NPORT - 1)) + + +#define SX_DATA_REG 0 /* Base+0 : Data register */ +#define SX_ADDR_REG 1 /* base+1 : Address register. */ + +#define MHz *1000000 /* I'm ashamed of myself. */ + +/* On-board oscillator frequency */ +#define SX_OSCFREQ (25 MHz/2) +/* There is a 25MHz crystal on the board, but the chip is in /2 mode */ + + +/* Ticks per sec. Used for setting receiver timeout and break length */ +#define SPECIALIX_TPS 4000 + +/* Yeah, after heavy testing I decided it must be 6. + * Sure, You can change it if needed. + */ +#define SPECIALIX_RXFIFO 6 /* Max. receiver FIFO size (1-8) */ + +#define SPECIALIX_MAGIC 0x0907 + +#define SX_CCR_TIMEOUT 10000 /* CCR timeout. You may need to wait upto + 10 milliseconds before the internal + processor is available again after + you give it a command */ + +#define SX_IOBASE1 0x100 +#define SX_IOBASE2 0x180 +#define SX_IOBASE3 0x250 +#define SX_IOBASE4 0x260 + +struct specialix_board { + unsigned long flags; + unsigned short base; + unsigned char irq; + //signed char count; + int count; + unsigned char DTR; + int reg; + spinlock_t lock; +}; + +#define SX_BOARD_PRESENT 0x00000001 +#define SX_BOARD_ACTIVE 0x00000002 +#define SX_BOARD_IS_PCI 0x00000004 + + +struct specialix_port { + int magic; + struct tty_port port; + int baud_base; + int flags; + int timeout; + unsigned char * xmit_buf; + int custom_divisor; + int xmit_head; + int xmit_tail; + int xmit_cnt; + short wakeup_chars; + short break_length; + unsigned char mark_mask; + unsigned char IER; + unsigned char MSVR; + unsigned char COR2; + unsigned long overrun; + unsigned long hits[10]; + spinlock_t lock; +}; + +#endif /* __KERNEL__ */ +#endif /* __LINUX_SPECIALIX_H */ + + + + + + + + + diff --git a/drivers/staging/tty/stallion.c b/drivers/staging/tty/stallion.c new file mode 100644 index 000000000000..4fff5cd3b163 --- /dev/null +++ b/drivers/staging/tty/stallion.c @@ -0,0 +1,4651 @@ +/*****************************************************************************/ + +/* + * stallion.c -- stallion multiport serial driver. + * + * Copyright (C) 1996-1999 Stallion Technologies + * Copyright (C) 1994-1996 Greg Ungerer. + * + * This code is loosely based on the Linux serial driver, written by + * Linus Torvalds, Theodore T'so and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +/*****************************************************************************/ + +/* + * Define different board types. Use the standard Stallion "assigned" + * board numbers. Boards supported in this driver are abbreviated as + * EIO = EasyIO and ECH = EasyConnection 8/32. + */ +#define BRD_EASYIO 20 +#define BRD_ECH 21 +#define BRD_ECHMC 22 +#define BRD_ECHPCI 26 +#define BRD_ECH64PCI 27 +#define BRD_EASYIOPCI 28 + +struct stlconf { + unsigned int brdtype; + int ioaddr1; + int ioaddr2; + unsigned long memaddr; + int irq; + int irqtype; +}; + +static unsigned int stl_nrbrds; + +/*****************************************************************************/ + +/* + * Define some important driver characteristics. Device major numbers + * allocated as per Linux Device Registry. + */ +#ifndef STL_SIOMEMMAJOR +#define STL_SIOMEMMAJOR 28 +#endif +#ifndef STL_SERIALMAJOR +#define STL_SERIALMAJOR 24 +#endif +#ifndef STL_CALLOUTMAJOR +#define STL_CALLOUTMAJOR 25 +#endif + +/* + * Set the TX buffer size. Bigger is better, but we don't want + * to chew too much memory with buffers! + */ +#define STL_TXBUFLOW 512 +#define STL_TXBUFSIZE 4096 + +/*****************************************************************************/ + +/* + * Define our local driver identity first. Set up stuff to deal with + * all the local structures required by a serial tty driver. + */ +static char *stl_drvtitle = "Stallion Multiport Serial Driver"; +static char *stl_drvname = "stallion"; +static char *stl_drvversion = "5.6.0"; + +static struct tty_driver *stl_serial; + +/* + * Define a local default termios struct. All ports will be created + * with this termios initially. Basically all it defines is a raw port + * at 9600, 8 data bits, 1 stop bit. + */ +static struct ktermios stl_deftermios = { + .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL), + .c_cc = INIT_C_CC, + .c_ispeed = 9600, + .c_ospeed = 9600, +}; + +/* + * Define global place to put buffer overflow characters. + */ +static char stl_unwanted[SC26198_RXFIFOSIZE]; + +/*****************************************************************************/ + +static DEFINE_MUTEX(stl_brdslock); +static struct stlbrd *stl_brds[STL_MAXBRDS]; + +static const struct tty_port_operations stl_port_ops; + +/* + * Per board state flags. Used with the state field of the board struct. + * Not really much here! + */ +#define BRD_FOUND 0x1 +#define STL_PROBED 0x2 + + +/* + * Define the port structure istate flags. These set of flags are + * modified at interrupt time - so setting and reseting them needs + * to be atomic. Use the bit clear/setting routines for this. + */ +#define ASYI_TXBUSY 1 +#define ASYI_TXLOW 2 +#define ASYI_TXFLOWED 3 + +/* + * Define an array of board names as printable strings. Handy for + * referencing boards when printing trace and stuff. + */ +static char *stl_brdnames[] = { + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + "EasyIO", + "EC8/32-AT", + "EC8/32-MC", + NULL, + NULL, + NULL, + "EC8/32-PCI", + "EC8/64-PCI", + "EasyIO-PCI", +}; + +/*****************************************************************************/ + +/* + * Define some string labels for arguments passed from the module + * load line. These allow for easy board definitions, and easy + * modification of the io, memory and irq resoucres. + */ +static unsigned int stl_nargs; +static char *board0[4]; +static char *board1[4]; +static char *board2[4]; +static char *board3[4]; + +static char **stl_brdsp[] = { + (char **) &board0, + (char **) &board1, + (char **) &board2, + (char **) &board3 +}; + +/* + * Define a set of common board names, and types. This is used to + * parse any module arguments. + */ + +static struct { + char *name; + int type; +} stl_brdstr[] = { + { "easyio", BRD_EASYIO }, + { "eio", BRD_EASYIO }, + { "20", BRD_EASYIO }, + { "ec8/32", BRD_ECH }, + { "ec8/32-at", BRD_ECH }, + { "ec8/32-isa", BRD_ECH }, + { "ech", BRD_ECH }, + { "echat", BRD_ECH }, + { "21", BRD_ECH }, + { "ec8/32-mc", BRD_ECHMC }, + { "ec8/32-mca", BRD_ECHMC }, + { "echmc", BRD_ECHMC }, + { "echmca", BRD_ECHMC }, + { "22", BRD_ECHMC }, + { "ec8/32-pc", BRD_ECHPCI }, + { "ec8/32-pci", BRD_ECHPCI }, + { "26", BRD_ECHPCI }, + { "ec8/64-pc", BRD_ECH64PCI }, + { "ec8/64-pci", BRD_ECH64PCI }, + { "ech-pci", BRD_ECH64PCI }, + { "echpci", BRD_ECH64PCI }, + { "echpc", BRD_ECH64PCI }, + { "27", BRD_ECH64PCI }, + { "easyio-pc", BRD_EASYIOPCI }, + { "easyio-pci", BRD_EASYIOPCI }, + { "eio-pci", BRD_EASYIOPCI }, + { "eiopci", BRD_EASYIOPCI }, + { "28", BRD_EASYIOPCI }, +}; + +/* + * Define the module agruments. + */ + +module_param_array(board0, charp, &stl_nargs, 0); +MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]"); +module_param_array(board1, charp, &stl_nargs, 0); +MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]"); +module_param_array(board2, charp, &stl_nargs, 0); +MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]"); +module_param_array(board3, charp, &stl_nargs, 0); +MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]"); + +/*****************************************************************************/ + +/* + * Hardware ID bits for the EasyIO and ECH boards. These defines apply + * to the directly accessible io ports of these boards (not the uarts - + * they are in cd1400.h and sc26198.h). + */ +#define EIO_8PORTRS 0x04 +#define EIO_4PORTRS 0x05 +#define EIO_8PORTDI 0x00 +#define EIO_8PORTM 0x06 +#define EIO_MK3 0x03 +#define EIO_IDBITMASK 0x07 + +#define EIO_BRDMASK 0xf0 +#define ID_BRD4 0x10 +#define ID_BRD8 0x20 +#define ID_BRD16 0x30 + +#define EIO_INTRPEND 0x08 +#define EIO_INTEDGE 0x00 +#define EIO_INTLEVEL 0x08 +#define EIO_0WS 0x10 + +#define ECH_ID 0xa0 +#define ECH_IDBITMASK 0xe0 +#define ECH_BRDENABLE 0x08 +#define ECH_BRDDISABLE 0x00 +#define ECH_INTENABLE 0x01 +#define ECH_INTDISABLE 0x00 +#define ECH_INTLEVEL 0x02 +#define ECH_INTEDGE 0x00 +#define ECH_INTRPEND 0x01 +#define ECH_BRDRESET 0x01 + +#define ECHMC_INTENABLE 0x01 +#define ECHMC_BRDRESET 0x02 + +#define ECH_PNLSTATUS 2 +#define ECH_PNL16PORT 0x20 +#define ECH_PNLIDMASK 0x07 +#define ECH_PNLXPID 0x40 +#define ECH_PNLINTRPEND 0x80 + +#define ECH_ADDR2MASK 0x1e0 + +/* + * Define the vector mapping bits for the programmable interrupt board + * hardware. These bits encode the interrupt for the board to use - it + * is software selectable (except the EIO-8M). + */ +static unsigned char stl_vecmap[] = { + 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07, + 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03 +}; + +/* + * Lock ordering is that you may not take stallion_lock holding + * brd_lock. + */ + +static spinlock_t brd_lock; /* Guard the board mapping */ +static spinlock_t stallion_lock; /* Guard the tty driver */ + +/* + * Set up enable and disable macros for the ECH boards. They require + * the secondary io address space to be activated and deactivated. + * This way all ECH boards can share their secondary io region. + * If this is an ECH-PCI board then also need to set the page pointer + * to point to the correct page. + */ +#define BRDENABLE(brdnr,pagenr) \ + if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \ + outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \ + stl_brds[(brdnr)]->ioctrl); \ + else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \ + outb((pagenr), stl_brds[(brdnr)]->ioctrl); + +#define BRDDISABLE(brdnr) \ + if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \ + outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \ + stl_brds[(brdnr)]->ioctrl); + +#define STL_CD1400MAXBAUD 230400 +#define STL_SC26198MAXBAUD 460800 + +#define STL_BAUDBASE 115200 +#define STL_CLOSEDELAY (5 * HZ / 10) + +/*****************************************************************************/ + +/* + * Define the Stallion PCI vendor and device IDs. + */ +#ifndef PCI_VENDOR_ID_STALLION +#define PCI_VENDOR_ID_STALLION 0x124d +#endif +#ifndef PCI_DEVICE_ID_ECHPCI832 +#define PCI_DEVICE_ID_ECHPCI832 0x0000 +#endif +#ifndef PCI_DEVICE_ID_ECHPCI864 +#define PCI_DEVICE_ID_ECHPCI864 0x0002 +#endif +#ifndef PCI_DEVICE_ID_EIOPCI +#define PCI_DEVICE_ID_EIOPCI 0x0003 +#endif + +/* + * Define structure to hold all Stallion PCI boards. + */ + +static struct pci_device_id stl_pcibrds[] = { + { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864), + .driver_data = BRD_ECH64PCI }, + { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI), + .driver_data = BRD_EASYIOPCI }, + { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832), + .driver_data = BRD_ECHPCI }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410), + .driver_data = BRD_ECHPCI }, + { } +}; +MODULE_DEVICE_TABLE(pci, stl_pcibrds); + +/*****************************************************************************/ + +/* + * Define macros to extract a brd/port number from a minor number. + */ +#define MINOR2BRD(min) (((min) & 0xc0) >> 6) +#define MINOR2PORT(min) ((min) & 0x3f) + +/* + * Define a baud rate table that converts termios baud rate selector + * into the actual baud rate value. All baud rate calculations are + * based on the actual baud rate required. + */ +static unsigned int stl_baudrates[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 +}; + +/*****************************************************************************/ + +/* + * Declare all those functions in this driver! + */ + +static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); +static int stl_brdinit(struct stlbrd *brdp); +static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); +static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); + +/* + * CD1400 uart specific handling functions. + */ +static void stl_cd1400setreg(struct stlport *portp, int regnr, int value); +static int stl_cd1400getreg(struct stlport *portp, int regnr); +static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value); +static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp); +static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); +static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp); +static int stl_cd1400getsignals(struct stlport *portp); +static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts); +static void stl_cd1400ccrwait(struct stlport *portp); +static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx); +static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx); +static void stl_cd1400disableintrs(struct stlport *portp); +static void stl_cd1400sendbreak(struct stlport *portp, int len); +static void stl_cd1400flowctrl(struct stlport *portp, int state); +static void stl_cd1400sendflow(struct stlport *portp, int state); +static void stl_cd1400flush(struct stlport *portp); +static int stl_cd1400datastate(struct stlport *portp); +static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase); +static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase); +static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr); +static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr); +static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr); + +static inline int stl_cd1400breakisr(struct stlport *portp, int ioaddr); + +/* + * SC26198 uart specific handling functions. + */ +static void stl_sc26198setreg(struct stlport *portp, int regnr, int value); +static int stl_sc26198getreg(struct stlport *portp, int regnr); +static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value); +static int stl_sc26198getglobreg(struct stlport *portp, int regnr); +static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp); +static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); +static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp); +static int stl_sc26198getsignals(struct stlport *portp); +static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts); +static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx); +static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx); +static void stl_sc26198disableintrs(struct stlport *portp); +static void stl_sc26198sendbreak(struct stlport *portp, int len); +static void stl_sc26198flowctrl(struct stlport *portp, int state); +static void stl_sc26198sendflow(struct stlport *portp, int state); +static void stl_sc26198flush(struct stlport *portp); +static int stl_sc26198datastate(struct stlport *portp); +static void stl_sc26198wait(struct stlport *portp); +static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty); +static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase); +static void stl_sc26198txisr(struct stlport *port); +static void stl_sc26198rxisr(struct stlport *port, unsigned int iack); +static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch); +static void stl_sc26198rxbadchars(struct stlport *portp); +static void stl_sc26198otherisr(struct stlport *port, unsigned int iack); + +/*****************************************************************************/ + +/* + * Generic UART support structure. + */ +typedef struct uart { + int (*panelinit)(struct stlbrd *brdp, struct stlpanel *panelp); + void (*portinit)(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); + void (*setport)(struct stlport *portp, struct ktermios *tiosp); + int (*getsignals)(struct stlport *portp); + void (*setsignals)(struct stlport *portp, int dtr, int rts); + void (*enablerxtx)(struct stlport *portp, int rx, int tx); + void (*startrxtx)(struct stlport *portp, int rx, int tx); + void (*disableintrs)(struct stlport *portp); + void (*sendbreak)(struct stlport *portp, int len); + void (*flowctrl)(struct stlport *portp, int state); + void (*sendflow)(struct stlport *portp, int state); + void (*flush)(struct stlport *portp); + int (*datastate)(struct stlport *portp); + void (*intr)(struct stlpanel *panelp, unsigned int iobase); +} uart_t; + +/* + * Define some macros to make calling these functions nice and clean. + */ +#define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit) +#define stl_portinit (* ((uart_t *) portp->uartp)->portinit) +#define stl_setport (* ((uart_t *) portp->uartp)->setport) +#define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals) +#define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals) +#define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx) +#define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx) +#define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs) +#define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak) +#define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl) +#define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow) +#define stl_flush (* ((uart_t *) portp->uartp)->flush) +#define stl_datastate (* ((uart_t *) portp->uartp)->datastate) + +/*****************************************************************************/ + +/* + * CD1400 UART specific data initialization. + */ +static uart_t stl_cd1400uart = { + stl_cd1400panelinit, + stl_cd1400portinit, + stl_cd1400setport, + stl_cd1400getsignals, + stl_cd1400setsignals, + stl_cd1400enablerxtx, + stl_cd1400startrxtx, + stl_cd1400disableintrs, + stl_cd1400sendbreak, + stl_cd1400flowctrl, + stl_cd1400sendflow, + stl_cd1400flush, + stl_cd1400datastate, + stl_cd1400eiointr +}; + +/* + * Define the offsets within the register bank of a cd1400 based panel. + * These io address offsets are common to the EasyIO board as well. + */ +#define EREG_ADDR 0 +#define EREG_DATA 4 +#define EREG_RXACK 5 +#define EREG_TXACK 6 +#define EREG_MDACK 7 + +#define EREG_BANKSIZE 8 + +#define CD1400_CLK 25000000 +#define CD1400_CLK8M 20000000 + +/* + * Define the cd1400 baud rate clocks. These are used when calculating + * what clock and divisor to use for the required baud rate. Also + * define the maximum baud rate allowed, and the default base baud. + */ +static int stl_cd1400clkdivs[] = { + CD1400_CLK0, CD1400_CLK1, CD1400_CLK2, CD1400_CLK3, CD1400_CLK4 +}; + +/*****************************************************************************/ + +/* + * SC26198 UART specific data initization. + */ +static uart_t stl_sc26198uart = { + stl_sc26198panelinit, + stl_sc26198portinit, + stl_sc26198setport, + stl_sc26198getsignals, + stl_sc26198setsignals, + stl_sc26198enablerxtx, + stl_sc26198startrxtx, + stl_sc26198disableintrs, + stl_sc26198sendbreak, + stl_sc26198flowctrl, + stl_sc26198sendflow, + stl_sc26198flush, + stl_sc26198datastate, + stl_sc26198intr +}; + +/* + * Define the offsets within the register bank of a sc26198 based panel. + */ +#define XP_DATA 0 +#define XP_ADDR 1 +#define XP_MODID 2 +#define XP_STATUS 2 +#define XP_IACK 3 + +#define XP_BANKSIZE 4 + +/* + * Define the sc26198 baud rate table. Offsets within the table + * represent the actual baud rate selector of sc26198 registers. + */ +static unsigned int sc26198_baudtable[] = { + 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600, + 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200, + 230400, 460800, 921600 +}; + +#define SC26198_NRBAUDS ARRAY_SIZE(sc26198_baudtable) + +/*****************************************************************************/ + +/* + * Define the driver info for a user level control device. Used mainly + * to get at port stats - only not using the port device itself. + */ +static const struct file_operations stl_fsiomem = { + .owner = THIS_MODULE, + .unlocked_ioctl = stl_memioctl, + .llseek = noop_llseek, +}; + +static struct class *stallion_class; + +static void stl_cd_change(struct stlport *portp) +{ + unsigned int oldsigs = portp->sigs; + struct tty_struct *tty = tty_port_tty_get(&portp->port); + + if (!tty) + return; + + portp->sigs = stl_getsignals(portp); + + if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0)) + wake_up_interruptible(&portp->port.open_wait); + + if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) + if (portp->port.flags & ASYNC_CHECK_CD) + tty_hangup(tty); + tty_kref_put(tty); +} + +/* + * Check for any arguments passed in on the module load command line. + */ + +/*****************************************************************************/ + +/* + * Parse the supplied argument string, into the board conf struct. + */ + +static int __init stl_parsebrd(struct stlconf *confp, char **argp) +{ + char *sp; + unsigned int i; + + pr_debug("stl_parsebrd(confp=%p,argp=%p)\n", confp, argp); + + if ((argp[0] == NULL) || (*argp[0] == 0)) + return 0; + + for (sp = argp[0], i = 0; (*sp != 0) && (i < 25); sp++, i++) + *sp = tolower(*sp); + + for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++) + if (strcmp(stl_brdstr[i].name, argp[0]) == 0) + break; + + if (i == ARRAY_SIZE(stl_brdstr)) { + printk("STALLION: unknown board name, %s?\n", argp[0]); + return 0; + } + + confp->brdtype = stl_brdstr[i].type; + + i = 1; + if ((argp[i] != NULL) && (*argp[i] != 0)) + confp->ioaddr1 = simple_strtoul(argp[i], NULL, 0); + i++; + if (confp->brdtype == BRD_ECH) { + if ((argp[i] != NULL) && (*argp[i] != 0)) + confp->ioaddr2 = simple_strtoul(argp[i], NULL, 0); + i++; + } + if ((argp[i] != NULL) && (*argp[i] != 0)) + confp->irq = simple_strtoul(argp[i], NULL, 0); + return 1; +} + +/*****************************************************************************/ + +/* + * Allocate a new board structure. Fill out the basic info in it. + */ + +static struct stlbrd *stl_allocbrd(void) +{ + struct stlbrd *brdp; + + brdp = kzalloc(sizeof(struct stlbrd), GFP_KERNEL); + if (!brdp) { + printk("STALLION: failed to allocate memory (size=%Zd)\n", + sizeof(struct stlbrd)); + return NULL; + } + + brdp->magic = STL_BOARDMAGIC; + return brdp; +} + +/*****************************************************************************/ + +static int stl_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct stlport *portp = container_of(port, struct stlport, port); + if (!portp->tx.buf) { + portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); + if (!portp->tx.buf) + return -ENOMEM; + portp->tx.head = portp->tx.buf; + portp->tx.tail = portp->tx.buf; + } + stl_setport(portp, tty->termios); + portp->sigs = stl_getsignals(portp); + stl_setsignals(portp, 1, 1); + stl_enablerxtx(portp, 1, 1); + stl_startrxtx(portp, 1, 0); + return 0; +} + +static int stl_open(struct tty_struct *tty, struct file *filp) +{ + struct stlport *portp; + struct stlbrd *brdp; + unsigned int minordev, brdnr, panelnr; + int portnr; + + pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name); + + minordev = tty->index; + brdnr = MINOR2BRD(minordev); + if (brdnr >= stl_nrbrds) + return -ENODEV; + brdp = stl_brds[brdnr]; + if (brdp == NULL) + return -ENODEV; + + minordev = MINOR2PORT(minordev); + for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) { + if (brdp->panels[panelnr] == NULL) + break; + if (minordev < brdp->panels[panelnr]->nrports) { + portnr = minordev; + break; + } + minordev -= brdp->panels[panelnr]->nrports; + } + if (portnr < 0) + return -ENODEV; + + portp = brdp->panels[panelnr]->ports[portnr]; + if (portp == NULL) + return -ENODEV; + + tty->driver_data = portp; + return tty_port_open(&portp->port, tty, filp); + +} + +/*****************************************************************************/ + +static int stl_carrier_raised(struct tty_port *port) +{ + struct stlport *portp = container_of(port, struct stlport, port); + return (portp->sigs & TIOCM_CD) ? 1 : 0; +} + +static void stl_dtr_rts(struct tty_port *port, int on) +{ + struct stlport *portp = container_of(port, struct stlport, port); + /* Takes brd_lock internally */ + stl_setsignals(portp, on, on); +} + +/*****************************************************************************/ + +static void stl_flushbuffer(struct tty_struct *tty) +{ + struct stlport *portp; + + pr_debug("stl_flushbuffer(tty=%p)\n", tty); + + portp = tty->driver_data; + if (portp == NULL) + return; + + stl_flush(portp); + tty_wakeup(tty); +} + +/*****************************************************************************/ + +static void stl_waituntilsent(struct tty_struct *tty, int timeout) +{ + struct stlport *portp; + unsigned long tend; + + pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout); + + portp = tty->driver_data; + if (portp == NULL) + return; + + if (timeout == 0) + timeout = HZ; + tend = jiffies + timeout; + + while (stl_datastate(portp)) { + if (signal_pending(current)) + break; + msleep_interruptible(20); + if (time_after_eq(jiffies, tend)) + break; + } +} + +/*****************************************************************************/ + +static void stl_shutdown(struct tty_port *port) +{ + struct stlport *portp = container_of(port, struct stlport, port); + stl_disableintrs(portp); + stl_enablerxtx(portp, 0, 0); + stl_flush(portp); + portp->istate = 0; + if (portp->tx.buf != NULL) { + kfree(portp->tx.buf); + portp->tx.buf = NULL; + portp->tx.head = NULL; + portp->tx.tail = NULL; + } +} + +static void stl_close(struct tty_struct *tty, struct file *filp) +{ + struct stlport*portp; + pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); + + portp = tty->driver_data; + if(portp == NULL) + return; + tty_port_close(&portp->port, tty, filp); +} + +/*****************************************************************************/ + +/* + * Write routine. Take data and stuff it in to the TX ring queue. + * If transmit interrupts are not running then start them. + */ + +static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct stlport *portp; + unsigned int len, stlen; + unsigned char *chbuf; + char *head, *tail; + + pr_debug("stl_write(tty=%p,buf=%p,count=%d)\n", tty, buf, count); + + portp = tty->driver_data; + if (portp == NULL) + return 0; + if (portp->tx.buf == NULL) + return 0; + +/* + * If copying direct from user space we must cater for page faults, + * causing us to "sleep" here for a while. To handle this copy in all + * the data we need now, into a local buffer. Then when we got it all + * copy it into the TX buffer. + */ + chbuf = (unsigned char *) buf; + + head = portp->tx.head; + tail = portp->tx.tail; + if (head >= tail) { + len = STL_TXBUFSIZE - (head - tail) - 1; + stlen = STL_TXBUFSIZE - (head - portp->tx.buf); + } else { + len = tail - head - 1; + stlen = len; + } + + len = min(len, (unsigned int)count); + count = 0; + while (len > 0) { + stlen = min(len, stlen); + memcpy(head, chbuf, stlen); + len -= stlen; + chbuf += stlen; + count += stlen; + head += stlen; + if (head >= (portp->tx.buf + STL_TXBUFSIZE)) { + head = portp->tx.buf; + stlen = tail - head; + } + } + portp->tx.head = head; + + clear_bit(ASYI_TXLOW, &portp->istate); + stl_startrxtx(portp, -1, 1); + + return count; +} + +/*****************************************************************************/ + +static int stl_putchar(struct tty_struct *tty, unsigned char ch) +{ + struct stlport *portp; + unsigned int len; + char *head, *tail; + + pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch); + + portp = tty->driver_data; + if (portp == NULL) + return -EINVAL; + if (portp->tx.buf == NULL) + return -EINVAL; + + head = portp->tx.head; + tail = portp->tx.tail; + + len = (head >= tail) ? (STL_TXBUFSIZE - (head - tail)) : (tail - head); + len--; + + if (len > 0) { + *head++ = ch; + if (head >= (portp->tx.buf + STL_TXBUFSIZE)) + head = portp->tx.buf; + } + portp->tx.head = head; + return 0; +} + +/*****************************************************************************/ + +/* + * If there are any characters in the buffer then make sure that TX + * interrupts are on and get'em out. Normally used after the putchar + * routine has been called. + */ + +static void stl_flushchars(struct tty_struct *tty) +{ + struct stlport *portp; + + pr_debug("stl_flushchars(tty=%p)\n", tty); + + portp = tty->driver_data; + if (portp == NULL) + return; + if (portp->tx.buf == NULL) + return; + + stl_startrxtx(portp, -1, 1); +} + +/*****************************************************************************/ + +static int stl_writeroom(struct tty_struct *tty) +{ + struct stlport *portp; + char *head, *tail; + + pr_debug("stl_writeroom(tty=%p)\n", tty); + + portp = tty->driver_data; + if (portp == NULL) + return 0; + if (portp->tx.buf == NULL) + return 0; + + head = portp->tx.head; + tail = portp->tx.tail; + return (head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1); +} + +/*****************************************************************************/ + +/* + * Return number of chars in the TX buffer. Normally we would just + * calculate the number of chars in the buffer and return that, but if + * the buffer is empty and TX interrupts are still on then we return + * that the buffer still has 1 char in it. This way whoever called us + * will not think that ALL chars have drained - since the UART still + * must have some chars in it (we are busy after all). + */ + +static int stl_charsinbuffer(struct tty_struct *tty) +{ + struct stlport *portp; + unsigned int size; + char *head, *tail; + + pr_debug("stl_charsinbuffer(tty=%p)\n", tty); + + portp = tty->driver_data; + if (portp == NULL) + return 0; + if (portp->tx.buf == NULL) + return 0; + + head = portp->tx.head; + tail = portp->tx.tail; + size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); + if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate)) + size = 1; + return size; +} + +/*****************************************************************************/ + +/* + * Generate the serial struct info. + */ + +static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) +{ + struct serial_struct sio; + struct stlbrd *brdp; + + pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp); + + memset(&sio, 0, sizeof(struct serial_struct)); + + mutex_lock(&portp->port.mutex); + sio.line = portp->portnr; + sio.port = portp->ioaddr; + sio.flags = portp->port.flags; + sio.baud_base = portp->baud_base; + sio.close_delay = portp->close_delay; + sio.closing_wait = portp->closing_wait; + sio.custom_divisor = portp->custom_divisor; + sio.hub6 = 0; + if (portp->uartp == &stl_cd1400uart) { + sio.type = PORT_CIRRUS; + sio.xmit_fifo_size = CD1400_TXFIFOSIZE; + } else { + sio.type = PORT_UNKNOWN; + sio.xmit_fifo_size = SC26198_TXFIFOSIZE; + } + + brdp = stl_brds[portp->brdnr]; + if (brdp != NULL) + sio.irq = brdp->irq; + mutex_unlock(&portp->port.mutex); + + return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0; +} + +/*****************************************************************************/ + +/* + * Set port according to the serial struct info. + * At this point we do not do any auto-configure stuff, so we will + * just quietly ignore any requests to change irq, etc. + */ + +static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp) +{ + struct stlport * portp = tty->driver_data; + struct serial_struct sio; + + pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp); + + if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) + return -EFAULT; + mutex_lock(&portp->port.mutex); + if (!capable(CAP_SYS_ADMIN)) { + if ((sio.baud_base != portp->baud_base) || + (sio.close_delay != portp->close_delay) || + ((sio.flags & ~ASYNC_USR_MASK) != + (portp->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&portp->port.mutex); + return -EPERM; + } + } + + portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | + (sio.flags & ASYNC_USR_MASK); + portp->baud_base = sio.baud_base; + portp->close_delay = sio.close_delay; + portp->closing_wait = sio.closing_wait; + portp->custom_divisor = sio.custom_divisor; + mutex_unlock(&portp->port.mutex); + stl_setport(portp, tty->termios); + return 0; +} + +/*****************************************************************************/ + +static int stl_tiocmget(struct tty_struct *tty) +{ + struct stlport *portp; + + portp = tty->driver_data; + if (portp == NULL) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + return stl_getsignals(portp); +} + +static int stl_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct stlport *portp; + int rts = -1, dtr = -1; + + portp = tty->driver_data; + if (portp == NULL) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + + stl_setsignals(portp, dtr, rts); + return 0; +} + +static int stl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) +{ + struct stlport *portp; + int rc; + void __user *argp = (void __user *)arg; + + pr_debug("stl_ioctl(tty=%p,cmd=%x,arg=%lx)\n", tty, cmd, arg); + + portp = tty->driver_data; + if (portp == NULL) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + rc = 0; + + switch (cmd) { + case TIOCGSERIAL: + rc = stl_getserial(portp, argp); + break; + case TIOCSSERIAL: + rc = stl_setserial(tty, argp); + break; + case COM_GETPORTSTATS: + rc = stl_getportstats(tty, portp, argp); + break; + case COM_CLRPORTSTATS: + rc = stl_clrportstats(portp, argp); + break; + case TIOCSERCONFIG: + case TIOCSERGWILD: + case TIOCSERSWILD: + case TIOCSERGETLSR: + case TIOCSERGSTRUCT: + case TIOCSERGETMULTI: + case TIOCSERSETMULTI: + default: + rc = -ENOIOCTLCMD; + break; + } + return rc; +} + +/*****************************************************************************/ + +/* + * Start the transmitter again. Just turn TX interrupts back on. + */ + +static void stl_start(struct tty_struct *tty) +{ + struct stlport *portp; + + pr_debug("stl_start(tty=%p)\n", tty); + + portp = tty->driver_data; + if (portp == NULL) + return; + stl_startrxtx(portp, -1, 1); +} + +/*****************************************************************************/ + +static void stl_settermios(struct tty_struct *tty, struct ktermios *old) +{ + struct stlport *portp; + struct ktermios *tiosp; + + pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old); + + portp = tty->driver_data; + if (portp == NULL) + return; + + tiosp = tty->termios; + if ((tiosp->c_cflag == old->c_cflag) && + (tiosp->c_iflag == old->c_iflag)) + return; + + stl_setport(portp, tiosp); + stl_setsignals(portp, ((tiosp->c_cflag & (CBAUD & ~CBAUDEX)) ? 1 : 0), + -1); + if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) { + tty->hw_stopped = 0; + stl_start(tty); + } + if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL)) + wake_up_interruptible(&portp->port.open_wait); +} + +/*****************************************************************************/ + +/* + * Attempt to flow control who ever is sending us data. Based on termios + * settings use software or/and hardware flow control. + */ + +static void stl_throttle(struct tty_struct *tty) +{ + struct stlport *portp; + + pr_debug("stl_throttle(tty=%p)\n", tty); + + portp = tty->driver_data; + if (portp == NULL) + return; + stl_flowctrl(portp, 0); +} + +/*****************************************************************************/ + +/* + * Unflow control the device sending us data... + */ + +static void stl_unthrottle(struct tty_struct *tty) +{ + struct stlport *portp; + + pr_debug("stl_unthrottle(tty=%p)\n", tty); + + portp = tty->driver_data; + if (portp == NULL) + return; + stl_flowctrl(portp, 1); +} + +/*****************************************************************************/ + +/* + * Stop the transmitter. Basically to do this we will just turn TX + * interrupts off. + */ + +static void stl_stop(struct tty_struct *tty) +{ + struct stlport *portp; + + pr_debug("stl_stop(tty=%p)\n", tty); + + portp = tty->driver_data; + if (portp == NULL) + return; + stl_startrxtx(portp, -1, 0); +} + +/*****************************************************************************/ + +/* + * Hangup this port. This is pretty much like closing the port, only + * a little more brutal. No waiting for data to drain. Shutdown the + * port and maybe drop signals. + */ + +static void stl_hangup(struct tty_struct *tty) +{ + struct stlport *portp = tty->driver_data; + pr_debug("stl_hangup(tty=%p)\n", tty); + + if (portp == NULL) + return; + tty_port_hangup(&portp->port); +} + +/*****************************************************************************/ + +static int stl_breakctl(struct tty_struct *tty, int state) +{ + struct stlport *portp; + + pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state); + + portp = tty->driver_data; + if (portp == NULL) + return -EINVAL; + + stl_sendbreak(portp, ((state == -1) ? 1 : 2)); + return 0; +} + +/*****************************************************************************/ + +static void stl_sendxchar(struct tty_struct *tty, char ch) +{ + struct stlport *portp; + + pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch); + + portp = tty->driver_data; + if (portp == NULL) + return; + + if (ch == STOP_CHAR(tty)) + stl_sendflow(portp, 0); + else if (ch == START_CHAR(tty)) + stl_sendflow(portp, 1); + else + stl_putchar(tty, ch); +} + +static void stl_portinfo(struct seq_file *m, struct stlport *portp, int portnr) +{ + int sigs; + char sep; + + seq_printf(m, "%d: uart:%s tx:%d rx:%d", + portnr, (portp->hwid == 1) ? "SC26198" : "CD1400", + (int) portp->stats.txtotal, (int) portp->stats.rxtotal); + + if (portp->stats.rxframing) + seq_printf(m, " fe:%d", (int) portp->stats.rxframing); + if (portp->stats.rxparity) + seq_printf(m, " pe:%d", (int) portp->stats.rxparity); + if (portp->stats.rxbreaks) + seq_printf(m, " brk:%d", (int) portp->stats.rxbreaks); + if (portp->stats.rxoverrun) + seq_printf(m, " oe:%d", (int) portp->stats.rxoverrun); + + sigs = stl_getsignals(portp); + sep = ' '; + if (sigs & TIOCM_RTS) { + seq_printf(m, "%c%s", sep, "RTS"); + sep = '|'; + } + if (sigs & TIOCM_CTS) { + seq_printf(m, "%c%s", sep, "CTS"); + sep = '|'; + } + if (sigs & TIOCM_DTR) { + seq_printf(m, "%c%s", sep, "DTR"); + sep = '|'; + } + if (sigs & TIOCM_CD) { + seq_printf(m, "%c%s", sep, "DCD"); + sep = '|'; + } + if (sigs & TIOCM_DSR) { + seq_printf(m, "%c%s", sep, "DSR"); + sep = '|'; + } + seq_putc(m, '\n'); +} + +/*****************************************************************************/ + +/* + * Port info, read from the /proc file system. + */ + +static int stl_proc_show(struct seq_file *m, void *v) +{ + struct stlbrd *brdp; + struct stlpanel *panelp; + struct stlport *portp; + unsigned int brdnr, panelnr, portnr; + int totalport; + + totalport = 0; + + seq_printf(m, "%s: version %s\n", stl_drvtitle, stl_drvversion); + +/* + * We scan through for each board, panel and port. The offset is + * calculated on the fly, and irrelevant ports are skipped. + */ + for (brdnr = 0; brdnr < stl_nrbrds; brdnr++) { + brdp = stl_brds[brdnr]; + if (brdp == NULL) + continue; + if (brdp->state == 0) + continue; + + totalport = brdnr * STL_MAXPORTS; + for (panelnr = 0; panelnr < brdp->nrpanels; panelnr++) { + panelp = brdp->panels[panelnr]; + if (panelp == NULL) + continue; + + for (portnr = 0; portnr < panelp->nrports; portnr++, + totalport++) { + portp = panelp->ports[portnr]; + if (portp == NULL) + continue; + stl_portinfo(m, portp, totalport); + } + } + } + return 0; +} + +static int stl_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, stl_proc_show, NULL); +} + +static const struct file_operations stl_proc_fops = { + .owner = THIS_MODULE, + .open = stl_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/*****************************************************************************/ + +/* + * All board interrupts are vectored through here first. This code then + * calls off to the approrpriate board interrupt handlers. + */ + +static irqreturn_t stl_intr(int irq, void *dev_id) +{ + struct stlbrd *brdp = dev_id; + + pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp, brdp->irq); + + return IRQ_RETVAL((* brdp->isr)(brdp)); +} + +/*****************************************************************************/ + +/* + * Interrupt service routine for EasyIO board types. + */ + +static int stl_eiointr(struct stlbrd *brdp) +{ + struct stlpanel *panelp; + unsigned int iobase; + int handled = 0; + + spin_lock(&brd_lock); + panelp = brdp->panels[0]; + iobase = panelp->iobase; + while (inb(brdp->iostatus) & EIO_INTRPEND) { + handled = 1; + (* panelp->isr)(panelp, iobase); + } + spin_unlock(&brd_lock); + return handled; +} + +/*****************************************************************************/ + +/* + * Interrupt service routine for ECH-AT board types. + */ + +static int stl_echatintr(struct stlbrd *brdp) +{ + struct stlpanel *panelp; + unsigned int ioaddr, bnknr; + int handled = 0; + + outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl); + + while (inb(brdp->iostatus) & ECH_INTRPEND) { + handled = 1; + for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { + ioaddr = brdp->bnkstataddr[bnknr]; + if (inb(ioaddr) & ECH_PNLINTRPEND) { + panelp = brdp->bnk2panel[bnknr]; + (* panelp->isr)(panelp, (ioaddr & 0xfffc)); + } + } + } + + outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl); + + return handled; +} + +/*****************************************************************************/ + +/* + * Interrupt service routine for ECH-MCA board types. + */ + +static int stl_echmcaintr(struct stlbrd *brdp) +{ + struct stlpanel *panelp; + unsigned int ioaddr, bnknr; + int handled = 0; + + while (inb(brdp->iostatus) & ECH_INTRPEND) { + handled = 1; + for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { + ioaddr = brdp->bnkstataddr[bnknr]; + if (inb(ioaddr) & ECH_PNLINTRPEND) { + panelp = brdp->bnk2panel[bnknr]; + (* panelp->isr)(panelp, (ioaddr & 0xfffc)); + } + } + } + return handled; +} + +/*****************************************************************************/ + +/* + * Interrupt service routine for ECH-PCI board types. + */ + +static int stl_echpciintr(struct stlbrd *brdp) +{ + struct stlpanel *panelp; + unsigned int ioaddr, bnknr, recheck; + int handled = 0; + + while (1) { + recheck = 0; + for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { + outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl); + ioaddr = brdp->bnkstataddr[bnknr]; + if (inb(ioaddr) & ECH_PNLINTRPEND) { + panelp = brdp->bnk2panel[bnknr]; + (* panelp->isr)(panelp, (ioaddr & 0xfffc)); + recheck++; + handled = 1; + } + } + if (! recheck) + break; + } + return handled; +} + +/*****************************************************************************/ + +/* + * Interrupt service routine for ECH-8/64-PCI board types. + */ + +static int stl_echpci64intr(struct stlbrd *brdp) +{ + struct stlpanel *panelp; + unsigned int ioaddr, bnknr; + int handled = 0; + + while (inb(brdp->ioctrl) & 0x1) { + handled = 1; + for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) { + ioaddr = brdp->bnkstataddr[bnknr]; + if (inb(ioaddr) & ECH_PNLINTRPEND) { + panelp = brdp->bnk2panel[bnknr]; + (* panelp->isr)(panelp, (ioaddr & 0xfffc)); + } + } + } + + return handled; +} + +/*****************************************************************************/ + +/* + * Initialize all the ports on a panel. + */ + +static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) +{ + struct stlport *portp; + unsigned int i; + int chipmask; + + pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp, panelp); + + chipmask = stl_panelinit(brdp, panelp); + +/* + * All UART's are initialized (if found!). Now go through and setup + * each ports data structures. + */ + for (i = 0; i < panelp->nrports; i++) { + portp = kzalloc(sizeof(struct stlport), GFP_KERNEL); + if (!portp) { + printk("STALLION: failed to allocate memory " + "(size=%Zd)\n", sizeof(struct stlport)); + break; + } + tty_port_init(&portp->port); + portp->port.ops = &stl_port_ops; + portp->magic = STL_PORTMAGIC; + portp->portnr = i; + portp->brdnr = panelp->brdnr; + portp->panelnr = panelp->panelnr; + portp->uartp = panelp->uartp; + portp->clk = brdp->clk; + portp->baud_base = STL_BAUDBASE; + portp->close_delay = STL_CLOSEDELAY; + portp->closing_wait = 30 * HZ; + init_waitqueue_head(&portp->port.open_wait); + init_waitqueue_head(&portp->port.close_wait); + portp->stats.brd = portp->brdnr; + portp->stats.panel = portp->panelnr; + portp->stats.port = portp->portnr; + panelp->ports[i] = portp; + stl_portinit(brdp, panelp, portp); + } + + return 0; +} + +static void stl_cleanup_panels(struct stlbrd *brdp) +{ + struct stlpanel *panelp; + struct stlport *portp; + unsigned int j, k; + struct tty_struct *tty; + + for (j = 0; j < STL_MAXPANELS; j++) { + panelp = brdp->panels[j]; + if (panelp == NULL) + continue; + for (k = 0; k < STL_PORTSPERPANEL; k++) { + portp = panelp->ports[k]; + if (portp == NULL) + continue; + tty = tty_port_tty_get(&portp->port); + if (tty != NULL) { + stl_hangup(tty); + tty_kref_put(tty); + } + kfree(portp->tx.buf); + kfree(portp); + } + kfree(panelp); + } +} + +/*****************************************************************************/ + +/* + * Try to find and initialize an EasyIO board. + */ + +static int __devinit stl_initeio(struct stlbrd *brdp) +{ + struct stlpanel *panelp; + unsigned int status; + char *name; + int retval; + + pr_debug("stl_initeio(brdp=%p)\n", brdp); + + brdp->ioctrl = brdp->ioaddr1 + 1; + brdp->iostatus = brdp->ioaddr1 + 2; + + status = inb(brdp->iostatus); + if ((status & EIO_IDBITMASK) == EIO_MK3) + brdp->ioctrl++; + +/* + * Handle board specific stuff now. The real difference is PCI + * or not PCI. + */ + if (brdp->brdtype == BRD_EASYIOPCI) { + brdp->iosize1 = 0x80; + brdp->iosize2 = 0x80; + name = "serial(EIO-PCI)"; + outb(0x41, (brdp->ioaddr2 + 0x4c)); + } else { + brdp->iosize1 = 8; + name = "serial(EIO)"; + if ((brdp->irq < 0) || (brdp->irq > 15) || + (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { + printk("STALLION: invalid irq=%d for brd=%d\n", + brdp->irq, brdp->brdnr); + retval = -EINVAL; + goto err; + } + outb((stl_vecmap[brdp->irq] | EIO_0WS | + ((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)), + brdp->ioctrl); + } + + retval = -EBUSY; + if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) { + printk(KERN_WARNING "STALLION: Warning, board %d I/O address " + "%x conflicts with another device\n", brdp->brdnr, + brdp->ioaddr1); + goto err; + } + + if (brdp->iosize2 > 0) + if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) { + printk(KERN_WARNING "STALLION: Warning, board %d I/O " + "address %x conflicts with another device\n", + brdp->brdnr, brdp->ioaddr2); + printk(KERN_WARNING "STALLION: Warning, also " + "releasing board %d I/O address %x \n", + brdp->brdnr, brdp->ioaddr1); + goto err_rel1; + } + +/* + * Everything looks OK, so let's go ahead and probe for the hardware. + */ + brdp->clk = CD1400_CLK; + brdp->isr = stl_eiointr; + + retval = -ENODEV; + switch (status & EIO_IDBITMASK) { + case EIO_8PORTM: + brdp->clk = CD1400_CLK8M; + /* fall thru */ + case EIO_8PORTRS: + case EIO_8PORTDI: + brdp->nrports = 8; + break; + case EIO_4PORTRS: + brdp->nrports = 4; + break; + case EIO_MK3: + switch (status & EIO_BRDMASK) { + case ID_BRD4: + brdp->nrports = 4; + break; + case ID_BRD8: + brdp->nrports = 8; + break; + case ID_BRD16: + brdp->nrports = 16; + break; + default: + goto err_rel2; + } + break; + default: + goto err_rel2; + } + +/* + * We have verified that the board is actually present, so now we + * can complete the setup. + */ + + panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL); + if (!panelp) { + printk(KERN_WARNING "STALLION: failed to allocate memory " + "(size=%Zd)\n", sizeof(struct stlpanel)); + retval = -ENOMEM; + goto err_rel2; + } + + panelp->magic = STL_PANELMAGIC; + panelp->brdnr = brdp->brdnr; + panelp->panelnr = 0; + panelp->nrports = brdp->nrports; + panelp->iobase = brdp->ioaddr1; + panelp->hwid = status; + if ((status & EIO_IDBITMASK) == EIO_MK3) { + panelp->uartp = &stl_sc26198uart; + panelp->isr = stl_sc26198intr; + } else { + panelp->uartp = &stl_cd1400uart; + panelp->isr = stl_cd1400eiointr; + } + + brdp->panels[0] = panelp; + brdp->nrpanels = 1; + brdp->state |= BRD_FOUND; + brdp->hwid = status; + if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) { + printk("STALLION: failed to register interrupt " + "routine for %s irq=%d\n", name, brdp->irq); + retval = -ENODEV; + goto err_fr; + } + + return 0; +err_fr: + stl_cleanup_panels(brdp); +err_rel2: + if (brdp->iosize2 > 0) + release_region(brdp->ioaddr2, brdp->iosize2); +err_rel1: + release_region(brdp->ioaddr1, brdp->iosize1); +err: + return retval; +} + +/*****************************************************************************/ + +/* + * Try to find an ECH board and initialize it. This code is capable of + * dealing with all types of ECH board. + */ + +static int __devinit stl_initech(struct stlbrd *brdp) +{ + struct stlpanel *panelp; + unsigned int status, nxtid, ioaddr, conflict, panelnr, banknr, i; + int retval; + char *name; + + pr_debug("stl_initech(brdp=%p)\n", brdp); + + status = 0; + conflict = 0; + +/* + * Set up the initial board register contents for boards. This varies a + * bit between the different board types. So we need to handle each + * separately. Also do a check that the supplied IRQ is good. + */ + switch (brdp->brdtype) { + + case BRD_ECH: + brdp->isr = stl_echatintr; + brdp->ioctrl = brdp->ioaddr1 + 1; + brdp->iostatus = brdp->ioaddr1 + 1; + status = inb(brdp->iostatus); + if ((status & ECH_IDBITMASK) != ECH_ID) { + retval = -ENODEV; + goto err; + } + if ((brdp->irq < 0) || (brdp->irq > 15) || + (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { + printk("STALLION: invalid irq=%d for brd=%d\n", + brdp->irq, brdp->brdnr); + retval = -EINVAL; + goto err; + } + status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1); + status |= (stl_vecmap[brdp->irq] << 1); + outb((status | ECH_BRDRESET), brdp->ioaddr1); + brdp->ioctrlval = ECH_INTENABLE | + ((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE); + for (i = 0; i < 10; i++) + outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl); + brdp->iosize1 = 2; + brdp->iosize2 = 32; + name = "serial(EC8/32)"; + outb(status, brdp->ioaddr1); + break; + + case BRD_ECHMC: + brdp->isr = stl_echmcaintr; + brdp->ioctrl = brdp->ioaddr1 + 0x20; + brdp->iostatus = brdp->ioctrl; + status = inb(brdp->iostatus); + if ((status & ECH_IDBITMASK) != ECH_ID) { + retval = -ENODEV; + goto err; + } + if ((brdp->irq < 0) || (brdp->irq > 15) || + (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { + printk("STALLION: invalid irq=%d for brd=%d\n", + brdp->irq, brdp->brdnr); + retval = -EINVAL; + goto err; + } + outb(ECHMC_BRDRESET, brdp->ioctrl); + outb(ECHMC_INTENABLE, brdp->ioctrl); + brdp->iosize1 = 64; + name = "serial(EC8/32-MC)"; + break; + + case BRD_ECHPCI: + brdp->isr = stl_echpciintr; + brdp->ioctrl = brdp->ioaddr1 + 2; + brdp->iosize1 = 4; + brdp->iosize2 = 8; + name = "serial(EC8/32-PCI)"; + break; + + case BRD_ECH64PCI: + brdp->isr = stl_echpci64intr; + brdp->ioctrl = brdp->ioaddr2 + 0x40; + outb(0x43, (brdp->ioaddr1 + 0x4c)); + brdp->iosize1 = 0x80; + brdp->iosize2 = 0x80; + name = "serial(EC8/64-PCI)"; + break; + + default: + printk("STALLION: unknown board type=%d\n", brdp->brdtype); + retval = -EINVAL; + goto err; + } + +/* + * Check boards for possible IO address conflicts and return fail status + * if an IO conflict found. + */ + retval = -EBUSY; + if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) { + printk(KERN_WARNING "STALLION: Warning, board %d I/O address " + "%x conflicts with another device\n", brdp->brdnr, + brdp->ioaddr1); + goto err; + } + + if (brdp->iosize2 > 0) + if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) { + printk(KERN_WARNING "STALLION: Warning, board %d I/O " + "address %x conflicts with another device\n", + brdp->brdnr, brdp->ioaddr2); + printk(KERN_WARNING "STALLION: Warning, also " + "releasing board %d I/O address %x \n", + brdp->brdnr, brdp->ioaddr1); + goto err_rel1; + } + +/* + * Scan through the secondary io address space looking for panels. + * As we find'em allocate and initialize panel structures for each. + */ + brdp->clk = CD1400_CLK; + brdp->hwid = status; + + ioaddr = brdp->ioaddr2; + banknr = 0; + panelnr = 0; + nxtid = 0; + + for (i = 0; i < STL_MAXPANELS; i++) { + if (brdp->brdtype == BRD_ECHPCI) { + outb(nxtid, brdp->ioctrl); + ioaddr = brdp->ioaddr2; + } + status = inb(ioaddr + ECH_PNLSTATUS); + if ((status & ECH_PNLIDMASK) != nxtid) + break; + panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL); + if (!panelp) { + printk("STALLION: failed to allocate memory " + "(size=%Zd)\n", sizeof(struct stlpanel)); + retval = -ENOMEM; + goto err_fr; + } + panelp->magic = STL_PANELMAGIC; + panelp->brdnr = brdp->brdnr; + panelp->panelnr = panelnr; + panelp->iobase = ioaddr; + panelp->pagenr = nxtid; + panelp->hwid = status; + brdp->bnk2panel[banknr] = panelp; + brdp->bnkpageaddr[banknr] = nxtid; + brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS; + + if (status & ECH_PNLXPID) { + panelp->uartp = &stl_sc26198uart; + panelp->isr = stl_sc26198intr; + if (status & ECH_PNL16PORT) { + panelp->nrports = 16; + brdp->bnk2panel[banknr] = panelp; + brdp->bnkpageaddr[banknr] = nxtid; + brdp->bnkstataddr[banknr++] = ioaddr + 4 + + ECH_PNLSTATUS; + } else + panelp->nrports = 8; + } else { + panelp->uartp = &stl_cd1400uart; + panelp->isr = stl_cd1400echintr; + if (status & ECH_PNL16PORT) { + panelp->nrports = 16; + panelp->ackmask = 0x80; + if (brdp->brdtype != BRD_ECHPCI) + ioaddr += EREG_BANKSIZE; + brdp->bnk2panel[banknr] = panelp; + brdp->bnkpageaddr[banknr] = ++nxtid; + brdp->bnkstataddr[banknr++] = ioaddr + + ECH_PNLSTATUS; + } else { + panelp->nrports = 8; + panelp->ackmask = 0xc0; + } + } + + nxtid++; + ioaddr += EREG_BANKSIZE; + brdp->nrports += panelp->nrports; + brdp->panels[panelnr++] = panelp; + if ((brdp->brdtype != BRD_ECHPCI) && + (ioaddr >= (brdp->ioaddr2 + brdp->iosize2))) { + retval = -EINVAL; + goto err_fr; + } + } + + brdp->nrpanels = panelnr; + brdp->nrbnks = banknr; + if (brdp->brdtype == BRD_ECH) + outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl); + + brdp->state |= BRD_FOUND; + if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) { + printk("STALLION: failed to register interrupt " + "routine for %s irq=%d\n", name, brdp->irq); + retval = -ENODEV; + goto err_fr; + } + + return 0; +err_fr: + stl_cleanup_panels(brdp); + if (brdp->iosize2 > 0) + release_region(brdp->ioaddr2, brdp->iosize2); +err_rel1: + release_region(brdp->ioaddr1, brdp->iosize1); +err: + return retval; +} + +/*****************************************************************************/ + +/* + * Initialize and configure the specified board. + * Scan through all the boards in the configuration and see what we + * can find. Handle EIO and the ECH boards a little differently here + * since the initial search and setup is very different. + */ + +static int __devinit stl_brdinit(struct stlbrd *brdp) +{ + int i, retval; + + pr_debug("stl_brdinit(brdp=%p)\n", brdp); + + switch (brdp->brdtype) { + case BRD_EASYIO: + case BRD_EASYIOPCI: + retval = stl_initeio(brdp); + if (retval) + goto err; + break; + case BRD_ECH: + case BRD_ECHMC: + case BRD_ECHPCI: + case BRD_ECH64PCI: + retval = stl_initech(brdp); + if (retval) + goto err; + break; + default: + printk("STALLION: board=%d is unknown board type=%d\n", + brdp->brdnr, brdp->brdtype); + retval = -ENODEV; + goto err; + } + + if ((brdp->state & BRD_FOUND) == 0) { + printk("STALLION: %s board not found, board=%d io=%x irq=%d\n", + stl_brdnames[brdp->brdtype], brdp->brdnr, + brdp->ioaddr1, brdp->irq); + goto err_free; + } + + for (i = 0; i < STL_MAXPANELS; i++) + if (brdp->panels[i] != NULL) + stl_initports(brdp, brdp->panels[i]); + + printk("STALLION: %s found, board=%d io=%x irq=%d " + "nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype], + brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels, + brdp->nrports); + + return 0; +err_free: + free_irq(brdp->irq, brdp); + + stl_cleanup_panels(brdp); + + release_region(brdp->ioaddr1, brdp->iosize1); + if (brdp->iosize2 > 0) + release_region(brdp->ioaddr2, brdp->iosize2); +err: + return retval; +} + +/*****************************************************************************/ + +/* + * Find the next available board number that is free. + */ + +static int __devinit stl_getbrdnr(void) +{ + unsigned int i; + + for (i = 0; i < STL_MAXBRDS; i++) + if (stl_brds[i] == NULL) { + if (i >= stl_nrbrds) + stl_nrbrds = i + 1; + return i; + } + + return -1; +} + +/*****************************************************************************/ +/* + * We have a Stallion board. Allocate a board structure and + * initialize it. Read its IO and IRQ resources from PCI + * configuration space. + */ + +static int __devinit stl_pciprobe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct stlbrd *brdp; + unsigned int i, brdtype = ent->driver_data; + int brdnr, retval = -ENODEV; + + if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) + goto err; + + retval = pci_enable_device(pdev); + if (retval) + goto err; + brdp = stl_allocbrd(); + if (brdp == NULL) { + retval = -ENOMEM; + goto err; + } + mutex_lock(&stl_brdslock); + brdnr = stl_getbrdnr(); + if (brdnr < 0) { + dev_err(&pdev->dev, "too many boards found, " + "maximum supported %d\n", STL_MAXBRDS); + mutex_unlock(&stl_brdslock); + retval = -ENODEV; + goto err_fr; + } + brdp->brdnr = (unsigned int)brdnr; + stl_brds[brdp->brdnr] = brdp; + mutex_unlock(&stl_brdslock); + + brdp->brdtype = brdtype; + brdp->state |= STL_PROBED; + +/* + * We have all resources from the board, so let's setup the actual + * board structure now. + */ + switch (brdtype) { + case BRD_ECHPCI: + brdp->ioaddr2 = pci_resource_start(pdev, 0); + brdp->ioaddr1 = pci_resource_start(pdev, 1); + break; + case BRD_ECH64PCI: + brdp->ioaddr2 = pci_resource_start(pdev, 2); + brdp->ioaddr1 = pci_resource_start(pdev, 1); + break; + case BRD_EASYIOPCI: + brdp->ioaddr1 = pci_resource_start(pdev, 2); + brdp->ioaddr2 = pci_resource_start(pdev, 1); + break; + default: + dev_err(&pdev->dev, "unknown PCI board type=%u\n", brdtype); + break; + } + + brdp->irq = pdev->irq; + retval = stl_brdinit(brdp); + if (retval) + goto err_null; + + pci_set_drvdata(pdev, brdp); + + for (i = 0; i < brdp->nrports; i++) + tty_register_device(stl_serial, + brdp->brdnr * STL_MAXPORTS + i, &pdev->dev); + + return 0; +err_null: + stl_brds[brdp->brdnr] = NULL; +err_fr: + kfree(brdp); +err: + return retval; +} + +static void __devexit stl_pciremove(struct pci_dev *pdev) +{ + struct stlbrd *brdp = pci_get_drvdata(pdev); + unsigned int i; + + free_irq(brdp->irq, brdp); + + stl_cleanup_panels(brdp); + + release_region(brdp->ioaddr1, brdp->iosize1); + if (brdp->iosize2 > 0) + release_region(brdp->ioaddr2, brdp->iosize2); + + for (i = 0; i < brdp->nrports; i++) + tty_unregister_device(stl_serial, + brdp->brdnr * STL_MAXPORTS + i); + + stl_brds[brdp->brdnr] = NULL; + kfree(brdp); +} + +static struct pci_driver stl_pcidriver = { + .name = "stallion", + .id_table = stl_pcibrds, + .probe = stl_pciprobe, + .remove = __devexit_p(stl_pciremove) +}; + +/*****************************************************************************/ + +/* + * Return the board stats structure to user app. + */ + +static int stl_getbrdstats(combrd_t __user *bp) +{ + combrd_t stl_brdstats; + struct stlbrd *brdp; + struct stlpanel *panelp; + unsigned int i; + + if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t))) + return -EFAULT; + if (stl_brdstats.brd >= STL_MAXBRDS) + return -ENODEV; + brdp = stl_brds[stl_brdstats.brd]; + if (brdp == NULL) + return -ENODEV; + + memset(&stl_brdstats, 0, sizeof(combrd_t)); + stl_brdstats.brd = brdp->brdnr; + stl_brdstats.type = brdp->brdtype; + stl_brdstats.hwid = brdp->hwid; + stl_brdstats.state = brdp->state; + stl_brdstats.ioaddr = brdp->ioaddr1; + stl_brdstats.ioaddr2 = brdp->ioaddr2; + stl_brdstats.irq = brdp->irq; + stl_brdstats.nrpanels = brdp->nrpanels; + stl_brdstats.nrports = brdp->nrports; + for (i = 0; i < brdp->nrpanels; i++) { + panelp = brdp->panels[i]; + stl_brdstats.panels[i].panel = i; + stl_brdstats.panels[i].hwid = panelp->hwid; + stl_brdstats.panels[i].nrports = panelp->nrports; + } + + return copy_to_user(bp, &stl_brdstats, sizeof(combrd_t)) ? -EFAULT : 0; +} + +/*****************************************************************************/ + +/* + * Resolve the referenced port number into a port struct pointer. + */ + +static struct stlport *stl_getport(int brdnr, int panelnr, int portnr) +{ + struct stlbrd *brdp; + struct stlpanel *panelp; + + if (brdnr < 0 || brdnr >= STL_MAXBRDS) + return NULL; + brdp = stl_brds[brdnr]; + if (brdp == NULL) + return NULL; + if (panelnr < 0 || (unsigned int)panelnr >= brdp->nrpanels) + return NULL; + panelp = brdp->panels[panelnr]; + if (panelp == NULL) + return NULL; + if (portnr < 0 || (unsigned int)portnr >= panelp->nrports) + return NULL; + return panelp->ports[portnr]; +} + +/*****************************************************************************/ + +/* + * Return the port stats structure to user app. A NULL port struct + * pointer passed in means that we need to find out from the app + * what port to get stats for (used through board control device). + */ + +static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp) +{ + comstats_t stl_comstats; + unsigned char *head, *tail; + unsigned long flags; + + if (!portp) { + if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) + return -EFAULT; + portp = stl_getport(stl_comstats.brd, stl_comstats.panel, + stl_comstats.port); + if (portp == NULL) + return -ENODEV; + } + + mutex_lock(&portp->port.mutex); + portp->stats.state = portp->istate; + portp->stats.flags = portp->port.flags; + portp->stats.hwid = portp->hwid; + + portp->stats.ttystate = 0; + portp->stats.cflags = 0; + portp->stats.iflags = 0; + portp->stats.oflags = 0; + portp->stats.lflags = 0; + portp->stats.rxbuffered = 0; + + spin_lock_irqsave(&stallion_lock, flags); + if (tty != NULL && portp->port.tty == tty) { + portp->stats.ttystate = tty->flags; + /* No longer available as a statistic */ + portp->stats.rxbuffered = 1; /*tty->flip.count; */ + if (tty->termios != NULL) { + portp->stats.cflags = tty->termios->c_cflag; + portp->stats.iflags = tty->termios->c_iflag; + portp->stats.oflags = tty->termios->c_oflag; + portp->stats.lflags = tty->termios->c_lflag; + } + } + spin_unlock_irqrestore(&stallion_lock, flags); + + head = portp->tx.head; + tail = portp->tx.tail; + portp->stats.txbuffered = (head >= tail) ? (head - tail) : + (STL_TXBUFSIZE - (tail - head)); + + portp->stats.signals = (unsigned long) stl_getsignals(portp); + mutex_unlock(&portp->port.mutex); + + return copy_to_user(cp, &portp->stats, + sizeof(comstats_t)) ? -EFAULT : 0; +} + +/*****************************************************************************/ + +/* + * Clear the port stats structure. We also return it zeroed out... + */ + +static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp) +{ + comstats_t stl_comstats; + + if (!portp) { + if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) + return -EFAULT; + portp = stl_getport(stl_comstats.brd, stl_comstats.panel, + stl_comstats.port); + if (portp == NULL) + return -ENODEV; + } + + mutex_lock(&portp->port.mutex); + memset(&portp->stats, 0, sizeof(comstats_t)); + portp->stats.brd = portp->brdnr; + portp->stats.panel = portp->panelnr; + portp->stats.port = portp->portnr; + mutex_unlock(&portp->port.mutex); + return copy_to_user(cp, &portp->stats, + sizeof(comstats_t)) ? -EFAULT : 0; +} + +/*****************************************************************************/ + +/* + * Return the entire driver ports structure to a user app. + */ + +static int stl_getportstruct(struct stlport __user *arg) +{ + struct stlport stl_dummyport; + struct stlport *portp; + + if (copy_from_user(&stl_dummyport, arg, sizeof(struct stlport))) + return -EFAULT; + portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr, + stl_dummyport.portnr); + if (!portp) + return -ENODEV; + return copy_to_user(arg, portp, sizeof(struct stlport)) ? -EFAULT : 0; +} + +/*****************************************************************************/ + +/* + * Return the entire driver board structure to a user app. + */ + +static int stl_getbrdstruct(struct stlbrd __user *arg) +{ + struct stlbrd stl_dummybrd; + struct stlbrd *brdp; + + if (copy_from_user(&stl_dummybrd, arg, sizeof(struct stlbrd))) + return -EFAULT; + if (stl_dummybrd.brdnr >= STL_MAXBRDS) + return -ENODEV; + brdp = stl_brds[stl_dummybrd.brdnr]; + if (!brdp) + return -ENODEV; + return copy_to_user(arg, brdp, sizeof(struct stlbrd)) ? -EFAULT : 0; +} + +/*****************************************************************************/ + +/* + * The "staliomem" device is also required to do some special operations + * on the board and/or ports. In this driver it is mostly used for stats + * collection. + */ + +static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) +{ + int brdnr, rc; + void __user *argp = (void __user *)arg; + + pr_debug("stl_memioctl(fp=%p,cmd=%x,arg=%lx)\n", fp, cmd,arg); + + brdnr = iminor(fp->f_dentry->d_inode); + if (brdnr >= STL_MAXBRDS) + return -ENODEV; + rc = 0; + + switch (cmd) { + case COM_GETPORTSTATS: + rc = stl_getportstats(NULL, NULL, argp); + break; + case COM_CLRPORTSTATS: + rc = stl_clrportstats(NULL, argp); + break; + case COM_GETBRDSTATS: + rc = stl_getbrdstats(argp); + break; + case COM_READPORT: + rc = stl_getportstruct(argp); + break; + case COM_READBOARD: + rc = stl_getbrdstruct(argp); + break; + default: + rc = -ENOIOCTLCMD; + break; + } + return rc; +} + +static const struct tty_operations stl_ops = { + .open = stl_open, + .close = stl_close, + .write = stl_write, + .put_char = stl_putchar, + .flush_chars = stl_flushchars, + .write_room = stl_writeroom, + .chars_in_buffer = stl_charsinbuffer, + .ioctl = stl_ioctl, + .set_termios = stl_settermios, + .throttle = stl_throttle, + .unthrottle = stl_unthrottle, + .stop = stl_stop, + .start = stl_start, + .hangup = stl_hangup, + .flush_buffer = stl_flushbuffer, + .break_ctl = stl_breakctl, + .wait_until_sent = stl_waituntilsent, + .send_xchar = stl_sendxchar, + .tiocmget = stl_tiocmget, + .tiocmset = stl_tiocmset, + .proc_fops = &stl_proc_fops, +}; + +static const struct tty_port_operations stl_port_ops = { + .carrier_raised = stl_carrier_raised, + .dtr_rts = stl_dtr_rts, + .activate = stl_activate, + .shutdown = stl_shutdown, +}; + +/*****************************************************************************/ +/* CD1400 HARDWARE FUNCTIONS */ +/*****************************************************************************/ + +/* + * These functions get/set/update the registers of the cd1400 UARTs. + * Access to the cd1400 registers is via an address/data io port pair. + * (Maybe should make this inline...) + */ + +static int stl_cd1400getreg(struct stlport *portp, int regnr) +{ + outb((regnr + portp->uartaddr), portp->ioaddr); + return inb(portp->ioaddr + EREG_DATA); +} + +static void stl_cd1400setreg(struct stlport *portp, int regnr, int value) +{ + outb(regnr + portp->uartaddr, portp->ioaddr); + outb(value, portp->ioaddr + EREG_DATA); +} + +static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value) +{ + outb(regnr + portp->uartaddr, portp->ioaddr); + if (inb(portp->ioaddr + EREG_DATA) != value) { + outb(value, portp->ioaddr + EREG_DATA); + return 1; + } + return 0; +} + +/*****************************************************************************/ + +/* + * Inbitialize the UARTs in a panel. We don't care what sort of board + * these ports are on - since the port io registers are almost + * identical when dealing with ports. + */ + +static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp) +{ + unsigned int gfrcr; + int chipmask, i, j; + int nrchips, uartaddr, ioaddr; + unsigned long flags; + + pr_debug("stl_panelinit(brdp=%p,panelp=%p)\n", brdp, panelp); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(panelp->brdnr, panelp->pagenr); + +/* + * Check that each chip is present and started up OK. + */ + chipmask = 0; + nrchips = panelp->nrports / CD1400_PORTS; + for (i = 0; i < nrchips; i++) { + if (brdp->brdtype == BRD_ECHPCI) { + outb((panelp->pagenr + (i >> 1)), brdp->ioctrl); + ioaddr = panelp->iobase; + } else + ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1)); + uartaddr = (i & 0x01) ? 0x080 : 0; + outb((GFRCR + uartaddr), ioaddr); + outb(0, (ioaddr + EREG_DATA)); + outb((CCR + uartaddr), ioaddr); + outb(CCR_RESETFULL, (ioaddr + EREG_DATA)); + outb(CCR_RESETFULL, (ioaddr + EREG_DATA)); + outb((GFRCR + uartaddr), ioaddr); + for (j = 0; j < CCR_MAXWAIT; j++) + if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0) + break; + + if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) { + printk("STALLION: cd1400 not responding, " + "brd=%d panel=%d chip=%d\n", + panelp->brdnr, panelp->panelnr, i); + continue; + } + chipmask |= (0x1 << i); + outb((PPR + uartaddr), ioaddr); + outb(PPR_SCALAR, (ioaddr + EREG_DATA)); + } + + BRDDISABLE(panelp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); + return chipmask; +} + +/*****************************************************************************/ + +/* + * Initialize hardware specific port registers. + */ + +static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp) +{ + unsigned long flags; + pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp, + panelp, portp); + + if ((brdp == NULL) || (panelp == NULL) || + (portp == NULL)) + return; + + spin_lock_irqsave(&brd_lock, flags); + portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) || + (portp->portnr < 8)) ? 0 : EREG_BANKSIZE); + portp->uartaddr = (portp->portnr & 0x04) << 5; + portp->pagenr = panelp->pagenr + (portp->portnr >> 3); + + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + stl_cd1400setreg(portp, LIVR, (portp->portnr << 3)); + portp->hwid = stl_cd1400getreg(portp, GFRCR); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Wait for the command register to be ready. We will poll this, + * since it won't usually take too long to be ready. + */ + +static void stl_cd1400ccrwait(struct stlport *portp) +{ + int i; + + for (i = 0; i < CCR_MAXWAIT; i++) + if (stl_cd1400getreg(portp, CCR) == 0) + return; + + printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n", + portp->portnr, portp->panelnr, portp->brdnr); +} + +/*****************************************************************************/ + +/* + * Set up the cd1400 registers for a port based on the termios port + * settings. + */ + +static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp) +{ + struct stlbrd *brdp; + unsigned long flags; + unsigned int clkdiv, baudrate; + unsigned char cor1, cor2, cor3; + unsigned char cor4, cor5, ccr; + unsigned char srer, sreron, sreroff; + unsigned char mcor1, mcor2, rtpr; + unsigned char clk, div; + + cor1 = 0; + cor2 = 0; + cor3 = 0; + cor4 = 0; + cor5 = 0; + ccr = 0; + rtpr = 0; + clk = 0; + div = 0; + mcor1 = 0; + mcor2 = 0; + sreron = 0; + sreroff = 0; + + brdp = stl_brds[portp->brdnr]; + if (brdp == NULL) + return; + +/* + * Set up the RX char ignore mask with those RX error types we + * can ignore. We can get the cd1400 to help us out a little here, + * it will ignore parity errors and breaks for us. + */ + portp->rxignoremsk = 0; + if (tiosp->c_iflag & IGNPAR) { + portp->rxignoremsk |= (ST_PARITY | ST_FRAMING | ST_OVERRUN); + cor1 |= COR1_PARIGNORE; + } + if (tiosp->c_iflag & IGNBRK) { + portp->rxignoremsk |= ST_BREAK; + cor4 |= COR4_IGNBRK; + } + + portp->rxmarkmsk = ST_OVERRUN; + if (tiosp->c_iflag & (INPCK | PARMRK)) + portp->rxmarkmsk |= (ST_PARITY | ST_FRAMING); + if (tiosp->c_iflag & BRKINT) + portp->rxmarkmsk |= ST_BREAK; + +/* + * Go through the char size, parity and stop bits and set all the + * option register appropriately. + */ + switch (tiosp->c_cflag & CSIZE) { + case CS5: + cor1 |= COR1_CHL5; + break; + case CS6: + cor1 |= COR1_CHL6; + break; + case CS7: + cor1 |= COR1_CHL7; + break; + default: + cor1 |= COR1_CHL8; + break; + } + + if (tiosp->c_cflag & CSTOPB) + cor1 |= COR1_STOP2; + else + cor1 |= COR1_STOP1; + + if (tiosp->c_cflag & PARENB) { + if (tiosp->c_cflag & PARODD) + cor1 |= (COR1_PARENB | COR1_PARODD); + else + cor1 |= (COR1_PARENB | COR1_PAREVEN); + } else { + cor1 |= COR1_PARNONE; + } + +/* + * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing + * space for hardware flow control and the like. This should be set to + * VMIN. Also here we will set the RX data timeout to 10ms - this should + * really be based on VTIME. + */ + cor3 |= FIFO_RXTHRESHOLD; + rtpr = 2; + +/* + * Calculate the baud rate timers. For now we will just assume that + * the input and output baud are the same. Could have used a baud + * table here, but this way we can generate virtually any baud rate + * we like! + */ + baudrate = tiosp->c_cflag & CBAUD; + if (baudrate & CBAUDEX) { + baudrate &= ~CBAUDEX; + if ((baudrate < 1) || (baudrate > 4)) + tiosp->c_cflag &= ~CBAUDEX; + else + baudrate += 15; + } + baudrate = stl_baudrates[baudrate]; + if ((tiosp->c_cflag & CBAUD) == B38400) { + if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + baudrate = 57600; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + baudrate = 115200; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + baudrate = 230400; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + baudrate = 460800; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) + baudrate = (portp->baud_base / portp->custom_divisor); + } + if (baudrate > STL_CD1400MAXBAUD) + baudrate = STL_CD1400MAXBAUD; + + if (baudrate > 0) { + for (clk = 0; clk < CD1400_NUMCLKS; clk++) { + clkdiv = (portp->clk / stl_cd1400clkdivs[clk]) / baudrate; + if (clkdiv < 0x100) + break; + } + div = (unsigned char) clkdiv; + } + +/* + * Check what form of modem signaling is required and set it up. + */ + if ((tiosp->c_cflag & CLOCAL) == 0) { + mcor1 |= MCOR1_DCD; + mcor2 |= MCOR2_DCD; + sreron |= SRER_MODEM; + portp->port.flags |= ASYNC_CHECK_CD; + } else + portp->port.flags &= ~ASYNC_CHECK_CD; + +/* + * Setup cd1400 enhanced modes if we can. In particular we want to + * handle as much of the flow control as possible automatically. As + * well as saving a few CPU cycles it will also greatly improve flow + * control reliability. + */ + if (tiosp->c_iflag & IXON) { + cor2 |= COR2_TXIBE; + cor3 |= COR3_SCD12; + if (tiosp->c_iflag & IXANY) + cor2 |= COR2_IXM; + } + + if (tiosp->c_cflag & CRTSCTS) { + cor2 |= COR2_CTSAE; + mcor1 |= FIFO_RTSTHRESHOLD; + } + +/* + * All cd1400 register values calculated so go through and set + * them all up. + */ + + pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", + portp->portnr, portp->panelnr, portp->brdnr); + pr_debug(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n", + cor1, cor2, cor3, cor4, cor5); + pr_debug(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n", + mcor1, mcor2, rtpr, sreron, sreroff); + pr_debug(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div); + pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n", + tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], + tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3)); + srer = stl_cd1400getreg(portp, SRER); + stl_cd1400setreg(portp, SRER, 0); + if (stl_cd1400updatereg(portp, COR1, cor1)) + ccr = 1; + if (stl_cd1400updatereg(portp, COR2, cor2)) + ccr = 1; + if (stl_cd1400updatereg(portp, COR3, cor3)) + ccr = 1; + if (ccr) { + stl_cd1400ccrwait(portp); + stl_cd1400setreg(portp, CCR, CCR_CORCHANGE); + } + stl_cd1400setreg(portp, COR4, cor4); + stl_cd1400setreg(portp, COR5, cor5); + stl_cd1400setreg(portp, MCOR1, mcor1); + stl_cd1400setreg(portp, MCOR2, mcor2); + if (baudrate > 0) { + stl_cd1400setreg(portp, TCOR, clk); + stl_cd1400setreg(portp, TBPR, div); + stl_cd1400setreg(portp, RCOR, clk); + stl_cd1400setreg(portp, RBPR, div); + } + stl_cd1400setreg(portp, SCHR1, tiosp->c_cc[VSTART]); + stl_cd1400setreg(portp, SCHR2, tiosp->c_cc[VSTOP]); + stl_cd1400setreg(portp, SCHR3, tiosp->c_cc[VSTART]); + stl_cd1400setreg(portp, SCHR4, tiosp->c_cc[VSTOP]); + stl_cd1400setreg(portp, RTPR, rtpr); + mcor1 = stl_cd1400getreg(portp, MSVR1); + if (mcor1 & MSVR1_DCD) + portp->sigs |= TIOCM_CD; + else + portp->sigs &= ~TIOCM_CD; + stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron)); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Set the state of the DTR and RTS signals. + */ + +static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts) +{ + unsigned char msvr1, msvr2; + unsigned long flags; + + pr_debug("stl_cd1400setsignals(portp=%p,dtr=%d,rts=%d)\n", + portp, dtr, rts); + + msvr1 = 0; + msvr2 = 0; + if (dtr > 0) + msvr1 = MSVR1_DTR; + if (rts > 0) + msvr2 = MSVR2_RTS; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + if (rts >= 0) + stl_cd1400setreg(portp, MSVR2, msvr2); + if (dtr >= 0) + stl_cd1400setreg(portp, MSVR1, msvr1); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Return the state of the signals. + */ + +static int stl_cd1400getsignals(struct stlport *portp) +{ + unsigned char msvr1, msvr2; + unsigned long flags; + int sigs; + + pr_debug("stl_cd1400getsignals(portp=%p)\n", portp); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + msvr1 = stl_cd1400getreg(portp, MSVR1); + msvr2 = stl_cd1400getreg(portp, MSVR2); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); + + sigs = 0; + sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0; + sigs |= (msvr1 & MSVR1_CTS) ? TIOCM_CTS : 0; + sigs |= (msvr1 & MSVR1_DTR) ? TIOCM_DTR : 0; + sigs |= (msvr2 & MSVR2_RTS) ? TIOCM_RTS : 0; +#if 0 + sigs |= (msvr1 & MSVR1_RI) ? TIOCM_RI : 0; + sigs |= (msvr1 & MSVR1_DSR) ? TIOCM_DSR : 0; +#else + sigs |= TIOCM_DSR; +#endif + return sigs; +} + +/*****************************************************************************/ + +/* + * Enable/Disable the Transmitter and/or Receiver. + */ + +static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx) +{ + unsigned char ccr; + unsigned long flags; + + pr_debug("stl_cd1400enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); + + ccr = 0; + + if (tx == 0) + ccr |= CCR_TXDISABLE; + else if (tx > 0) + ccr |= CCR_TXENABLE; + if (rx == 0) + ccr |= CCR_RXDISABLE; + else if (rx > 0) + ccr |= CCR_RXENABLE; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + stl_cd1400ccrwait(portp); + stl_cd1400setreg(portp, CCR, ccr); + stl_cd1400ccrwait(portp); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Start/stop the Transmitter and/or Receiver. + */ + +static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx) +{ + unsigned char sreron, sreroff; + unsigned long flags; + + pr_debug("stl_cd1400startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); + + sreron = 0; + sreroff = 0; + if (tx == 0) + sreroff |= (SRER_TXDATA | SRER_TXEMPTY); + else if (tx == 1) + sreron |= SRER_TXDATA; + else if (tx >= 2) + sreron |= SRER_TXEMPTY; + if (rx == 0) + sreroff |= SRER_RXDATA; + else if (rx > 0) + sreron |= SRER_RXDATA; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + stl_cd1400setreg(portp, SRER, + ((stl_cd1400getreg(portp, SRER) & ~sreroff) | sreron)); + BRDDISABLE(portp->brdnr); + if (tx > 0) + set_bit(ASYI_TXBUSY, &portp->istate); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Disable all interrupts from this port. + */ + +static void stl_cd1400disableintrs(struct stlport *portp) +{ + unsigned long flags; + + pr_debug("stl_cd1400disableintrs(portp=%p)\n", portp); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + stl_cd1400setreg(portp, SRER, 0); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +static void stl_cd1400sendbreak(struct stlport *portp, int len) +{ + unsigned long flags; + + pr_debug("stl_cd1400sendbreak(portp=%p,len=%d)\n", portp, len); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + stl_cd1400setreg(portp, SRER, + ((stl_cd1400getreg(portp, SRER) & ~SRER_TXDATA) | + SRER_TXEMPTY)); + BRDDISABLE(portp->brdnr); + portp->brklen = len; + if (len == 1) + portp->stats.txbreaks++; + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Take flow control actions... + */ + +static void stl_cd1400flowctrl(struct stlport *portp, int state) +{ + struct tty_struct *tty; + unsigned long flags; + + pr_debug("stl_cd1400flowctrl(portp=%p,state=%x)\n", portp, state); + + if (portp == NULL) + return; + tty = tty_port_tty_get(&portp->port); + if (tty == NULL) + return; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + + if (state) { + if (tty->termios->c_iflag & IXOFF) { + stl_cd1400ccrwait(portp); + stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1); + portp->stats.rxxon++; + stl_cd1400ccrwait(portp); + } +/* + * Question: should we return RTS to what it was before? It may + * have been set by an ioctl... Suppose not, since if you have + * hardware flow control set then it is pretty silly to go and + * set the RTS line by hand. + */ + if (tty->termios->c_cflag & CRTSCTS) { + stl_cd1400setreg(portp, MCOR1, + (stl_cd1400getreg(portp, MCOR1) | + FIFO_RTSTHRESHOLD)); + stl_cd1400setreg(portp, MSVR2, MSVR2_RTS); + portp->stats.rxrtson++; + } + } else { + if (tty->termios->c_iflag & IXOFF) { + stl_cd1400ccrwait(portp); + stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2); + portp->stats.rxxoff++; + stl_cd1400ccrwait(portp); + } + if (tty->termios->c_cflag & CRTSCTS) { + stl_cd1400setreg(portp, MCOR1, + (stl_cd1400getreg(portp, MCOR1) & 0xf0)); + stl_cd1400setreg(portp, MSVR2, 0); + portp->stats.rxrtsoff++; + } + } + + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); + tty_kref_put(tty); +} + +/*****************************************************************************/ + +/* + * Send a flow control character... + */ + +static void stl_cd1400sendflow(struct stlport *portp, int state) +{ + struct tty_struct *tty; + unsigned long flags; + + pr_debug("stl_cd1400sendflow(portp=%p,state=%x)\n", portp, state); + + if (portp == NULL) + return; + tty = tty_port_tty_get(&portp->port); + if (tty == NULL) + return; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + if (state) { + stl_cd1400ccrwait(portp); + stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1); + portp->stats.rxxon++; + stl_cd1400ccrwait(portp); + } else { + stl_cd1400ccrwait(portp); + stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2); + portp->stats.rxxoff++; + stl_cd1400ccrwait(portp); + } + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); + tty_kref_put(tty); +} + +/*****************************************************************************/ + +static void stl_cd1400flush(struct stlport *portp) +{ + unsigned long flags; + + pr_debug("stl_cd1400flush(portp=%p)\n", portp); + + if (portp == NULL) + return; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); + stl_cd1400ccrwait(portp); + stl_cd1400setreg(portp, CCR, CCR_TXFLUSHFIFO); + stl_cd1400ccrwait(portp); + portp->tx.tail = portp->tx.head; + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Return the current state of data flow on this port. This is only + * really interesting when determining if data has fully completed + * transmission or not... This is easy for the cd1400, it accurately + * maintains the busy port flag. + */ + +static int stl_cd1400datastate(struct stlport *portp) +{ + pr_debug("stl_cd1400datastate(portp=%p)\n", portp); + + if (portp == NULL) + return 0; + + return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0; +} + +/*****************************************************************************/ + +/* + * Interrupt service routine for cd1400 EasyIO boards. + */ + +static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase) +{ + unsigned char svrtype; + + pr_debug("stl_cd1400eiointr(panelp=%p,iobase=%x)\n", panelp, iobase); + + spin_lock(&brd_lock); + outb(SVRR, iobase); + svrtype = inb(iobase + EREG_DATA); + if (panelp->nrports > 4) { + outb((SVRR + 0x80), iobase); + svrtype |= inb(iobase + EREG_DATA); + } + + if (svrtype & SVRR_RX) + stl_cd1400rxisr(panelp, iobase); + else if (svrtype & SVRR_TX) + stl_cd1400txisr(panelp, iobase); + else if (svrtype & SVRR_MDM) + stl_cd1400mdmisr(panelp, iobase); + + spin_unlock(&brd_lock); +} + +/*****************************************************************************/ + +/* + * Interrupt service routine for cd1400 panels. + */ + +static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase) +{ + unsigned char svrtype; + + pr_debug("stl_cd1400echintr(panelp=%p,iobase=%x)\n", panelp, iobase); + + outb(SVRR, iobase); + svrtype = inb(iobase + EREG_DATA); + outb((SVRR + 0x80), iobase); + svrtype |= inb(iobase + EREG_DATA); + if (svrtype & SVRR_RX) + stl_cd1400rxisr(panelp, iobase); + else if (svrtype & SVRR_TX) + stl_cd1400txisr(panelp, iobase); + else if (svrtype & SVRR_MDM) + stl_cd1400mdmisr(panelp, iobase); +} + + +/*****************************************************************************/ + +/* + * Unfortunately we need to handle breaks in the TX data stream, since + * this is the only way to generate them on the cd1400. + */ + +static int stl_cd1400breakisr(struct stlport *portp, int ioaddr) +{ + if (portp->brklen == 1) { + outb((COR2 + portp->uartaddr), ioaddr); + outb((inb(ioaddr + EREG_DATA) | COR2_ETC), + (ioaddr + EREG_DATA)); + outb((TDR + portp->uartaddr), ioaddr); + outb(ETC_CMD, (ioaddr + EREG_DATA)); + outb(ETC_STARTBREAK, (ioaddr + EREG_DATA)); + outb((SRER + portp->uartaddr), ioaddr); + outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)), + (ioaddr + EREG_DATA)); + return 1; + } else if (portp->brklen > 1) { + outb((TDR + portp->uartaddr), ioaddr); + outb(ETC_CMD, (ioaddr + EREG_DATA)); + outb(ETC_STOPBREAK, (ioaddr + EREG_DATA)); + portp->brklen = -1; + return 1; + } else { + outb((COR2 + portp->uartaddr), ioaddr); + outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC), + (ioaddr + EREG_DATA)); + portp->brklen = 0; + } + return 0; +} + +/*****************************************************************************/ + +/* + * Transmit interrupt handler. This has gotta be fast! Handling TX + * chars is pretty simple, stuff as many as possible from the TX buffer + * into the cd1400 FIFO. Must also handle TX breaks here, since they + * are embedded as commands in the data stream. Oh no, had to use a goto! + * This could be optimized more, will do when I get time... + * In practice it is possible that interrupts are enabled but that the + * port has been hung up. Need to handle not having any TX buffer here, + * this is done by using the side effect that head and tail will also + * be NULL if the buffer has been freed. + */ + +static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) +{ + struct stlport *portp; + int len, stlen; + char *head, *tail; + unsigned char ioack, srer; + struct tty_struct *tty; + + pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr); + + ioack = inb(ioaddr + EREG_TXACK); + if (((ioack & panelp->ackmask) != 0) || + ((ioack & ACK_TYPMASK) != ACK_TYPTX)) { + printk("STALLION: bad TX interrupt ack value=%x\n", ioack); + return; + } + portp = panelp->ports[(ioack >> 3)]; + +/* + * Unfortunately we need to handle breaks in the data stream, since + * this is the only way to generate them on the cd1400. Do it now if + * a break is to be sent. + */ + if (portp->brklen != 0) + if (stl_cd1400breakisr(portp, ioaddr)) + goto stl_txalldone; + + head = portp->tx.head; + tail = portp->tx.tail; + len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); + if ((len == 0) || ((len < STL_TXBUFLOW) && + (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { + set_bit(ASYI_TXLOW, &portp->istate); + tty = tty_port_tty_get(&portp->port); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } + } + + if (len == 0) { + outb((SRER + portp->uartaddr), ioaddr); + srer = inb(ioaddr + EREG_DATA); + if (srer & SRER_TXDATA) { + srer = (srer & ~SRER_TXDATA) | SRER_TXEMPTY; + } else { + srer &= ~(SRER_TXDATA | SRER_TXEMPTY); + clear_bit(ASYI_TXBUSY, &portp->istate); + } + outb(srer, (ioaddr + EREG_DATA)); + } else { + len = min(len, CD1400_TXFIFOSIZE); + portp->stats.txtotal += len; + stlen = min_t(unsigned int, len, + (portp->tx.buf + STL_TXBUFSIZE) - tail); + outb((TDR + portp->uartaddr), ioaddr); + outsb((ioaddr + EREG_DATA), tail, stlen); + len -= stlen; + tail += stlen; + if (tail >= (portp->tx.buf + STL_TXBUFSIZE)) + tail = portp->tx.buf; + if (len > 0) { + outsb((ioaddr + EREG_DATA), tail, len); + tail += len; + } + portp->tx.tail = tail; + } + +stl_txalldone: + outb((EOSRR + portp->uartaddr), ioaddr); + outb(0, (ioaddr + EREG_DATA)); +} + +/*****************************************************************************/ + +/* + * Receive character interrupt handler. Determine if we have good chars + * or bad chars and then process appropriately. Good chars are easy + * just shove the lot into the RX buffer and set all status byte to 0. + * If a bad RX char then process as required. This routine needs to be + * fast! In practice it is possible that we get an interrupt on a port + * that is closed. This can happen on hangups - since they completely + * shutdown a port not in user context. Need to handle this case. + */ + +static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr) +{ + struct stlport *portp; + struct tty_struct *tty; + unsigned int ioack, len, buflen; + unsigned char status; + char ch; + + pr_debug("stl_cd1400rxisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr); + + ioack = inb(ioaddr + EREG_RXACK); + if ((ioack & panelp->ackmask) != 0) { + printk("STALLION: bad RX interrupt ack value=%x\n", ioack); + return; + } + portp = panelp->ports[(ioack >> 3)]; + tty = tty_port_tty_get(&portp->port); + + if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) { + outb((RDCR + portp->uartaddr), ioaddr); + len = inb(ioaddr + EREG_DATA); + if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { + len = min_t(unsigned int, len, sizeof(stl_unwanted)); + outb((RDSR + portp->uartaddr), ioaddr); + insb((ioaddr + EREG_DATA), &stl_unwanted[0], len); + portp->stats.rxlost += len; + portp->stats.rxtotal += len; + } else { + len = min(len, buflen); + if (len > 0) { + unsigned char *ptr; + outb((RDSR + portp->uartaddr), ioaddr); + tty_prepare_flip_string(tty, &ptr, len); + insb((ioaddr + EREG_DATA), ptr, len); + tty_schedule_flip(tty); + portp->stats.rxtotal += len; + } + } + } else if ((ioack & ACK_TYPMASK) == ACK_TYPRXBAD) { + outb((RDSR + portp->uartaddr), ioaddr); + status = inb(ioaddr + EREG_DATA); + ch = inb(ioaddr + EREG_DATA); + if (status & ST_PARITY) + portp->stats.rxparity++; + if (status & ST_FRAMING) + portp->stats.rxframing++; + if (status & ST_OVERRUN) + portp->stats.rxoverrun++; + if (status & ST_BREAK) + portp->stats.rxbreaks++; + if (status & ST_SCHARMASK) { + if ((status & ST_SCHARMASK) == ST_SCHAR1) + portp->stats.txxon++; + if ((status & ST_SCHARMASK) == ST_SCHAR2) + portp->stats.txxoff++; + goto stl_rxalldone; + } + if (tty != NULL && (portp->rxignoremsk & status) == 0) { + if (portp->rxmarkmsk & status) { + if (status & ST_BREAK) { + status = TTY_BREAK; + if (portp->port.flags & ASYNC_SAK) { + do_SAK(tty); + BRDENABLE(portp->brdnr, portp->pagenr); + } + } else if (status & ST_PARITY) + status = TTY_PARITY; + else if (status & ST_FRAMING) + status = TTY_FRAME; + else if(status & ST_OVERRUN) + status = TTY_OVERRUN; + else + status = 0; + } else + status = 0; + tty_insert_flip_char(tty, ch, status); + tty_schedule_flip(tty); + } + } else { + printk("STALLION: bad RX interrupt ack value=%x\n", ioack); + tty_kref_put(tty); + return; + } + +stl_rxalldone: + tty_kref_put(tty); + outb((EOSRR + portp->uartaddr), ioaddr); + outb(0, (ioaddr + EREG_DATA)); +} + +/*****************************************************************************/ + +/* + * Modem interrupt handler. The is called when the modem signal line + * (DCD) has changed state. Leave most of the work to the off-level + * processing routine. + */ + +static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr) +{ + struct stlport *portp; + unsigned int ioack; + unsigned char misr; + + pr_debug("stl_cd1400mdmisr(panelp=%p)\n", panelp); + + ioack = inb(ioaddr + EREG_MDACK); + if (((ioack & panelp->ackmask) != 0) || + ((ioack & ACK_TYPMASK) != ACK_TYPMDM)) { + printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack); + return; + } + portp = panelp->ports[(ioack >> 3)]; + + outb((MISR + portp->uartaddr), ioaddr); + misr = inb(ioaddr + EREG_DATA); + if (misr & MISR_DCD) { + stl_cd_change(portp); + portp->stats.modem++; + } + + outb((EOSRR + portp->uartaddr), ioaddr); + outb(0, (ioaddr + EREG_DATA)); +} + +/*****************************************************************************/ +/* SC26198 HARDWARE FUNCTIONS */ +/*****************************************************************************/ + +/* + * These functions get/set/update the registers of the sc26198 UARTs. + * Access to the sc26198 registers is via an address/data io port pair. + * (Maybe should make this inline...) + */ + +static int stl_sc26198getreg(struct stlport *portp, int regnr) +{ + outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); + return inb(portp->ioaddr + XP_DATA); +} + +static void stl_sc26198setreg(struct stlport *portp, int regnr, int value) +{ + outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); + outb(value, (portp->ioaddr + XP_DATA)); +} + +static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value) +{ + outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); + if (inb(portp->ioaddr + XP_DATA) != value) { + outb(value, (portp->ioaddr + XP_DATA)); + return 1; + } + return 0; +} + +/*****************************************************************************/ + +/* + * Functions to get and set the sc26198 global registers. + */ + +static int stl_sc26198getglobreg(struct stlport *portp, int regnr) +{ + outb(regnr, (portp->ioaddr + XP_ADDR)); + return inb(portp->ioaddr + XP_DATA); +} + +#if 0 +static void stl_sc26198setglobreg(struct stlport *portp, int regnr, int value) +{ + outb(regnr, (portp->ioaddr + XP_ADDR)); + outb(value, (portp->ioaddr + XP_DATA)); +} +#endif + +/*****************************************************************************/ + +/* + * Inbitialize the UARTs in a panel. We don't care what sort of board + * these ports are on - since the port io registers are almost + * identical when dealing with ports. + */ + +static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp) +{ + int chipmask, i; + int nrchips, ioaddr; + + pr_debug("stl_sc26198panelinit(brdp=%p,panelp=%p)\n", brdp, panelp); + + BRDENABLE(panelp->brdnr, panelp->pagenr); + +/* + * Check that each chip is present and started up OK. + */ + chipmask = 0; + nrchips = (panelp->nrports + 4) / SC26198_PORTS; + if (brdp->brdtype == BRD_ECHPCI) + outb(panelp->pagenr, brdp->ioctrl); + + for (i = 0; i < nrchips; i++) { + ioaddr = panelp->iobase + (i * 4); + outb(SCCR, (ioaddr + XP_ADDR)); + outb(CR_RESETALL, (ioaddr + XP_DATA)); + outb(TSTR, (ioaddr + XP_ADDR)); + if (inb(ioaddr + XP_DATA) != 0) { + printk("STALLION: sc26198 not responding, " + "brd=%d panel=%d chip=%d\n", + panelp->brdnr, panelp->panelnr, i); + continue; + } + chipmask |= (0x1 << i); + outb(GCCR, (ioaddr + XP_ADDR)); + outb(GCCR_IVRTYPCHANACK, (ioaddr + XP_DATA)); + outb(WDTRCR, (ioaddr + XP_ADDR)); + outb(0xff, (ioaddr + XP_DATA)); + } + + BRDDISABLE(panelp->brdnr); + return chipmask; +} + +/*****************************************************************************/ + +/* + * Initialize hardware specific port registers. + */ + +static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp) +{ + pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp, + panelp, portp); + + if ((brdp == NULL) || (panelp == NULL) || + (portp == NULL)) + return; + + portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4); + portp->uartaddr = (portp->portnr & 0x07) << 4; + portp->pagenr = panelp->pagenr; + portp->hwid = 0x1; + + BRDENABLE(portp->brdnr, portp->pagenr); + stl_sc26198setreg(portp, IOPCR, IOPCR_SETSIGS); + BRDDISABLE(portp->brdnr); +} + +/*****************************************************************************/ + +/* + * Set up the sc26198 registers for a port based on the termios port + * settings. + */ + +static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp) +{ + struct stlbrd *brdp; + unsigned long flags; + unsigned int baudrate; + unsigned char mr0, mr1, mr2, clk; + unsigned char imron, imroff, iopr, ipr; + + mr0 = 0; + mr1 = 0; + mr2 = 0; + clk = 0; + iopr = 0; + imron = 0; + imroff = 0; + + brdp = stl_brds[portp->brdnr]; + if (brdp == NULL) + return; + +/* + * Set up the RX char ignore mask with those RX error types we + * can ignore. + */ + portp->rxignoremsk = 0; + if (tiosp->c_iflag & IGNPAR) + portp->rxignoremsk |= (SR_RXPARITY | SR_RXFRAMING | + SR_RXOVERRUN); + if (tiosp->c_iflag & IGNBRK) + portp->rxignoremsk |= SR_RXBREAK; + + portp->rxmarkmsk = SR_RXOVERRUN; + if (tiosp->c_iflag & (INPCK | PARMRK)) + portp->rxmarkmsk |= (SR_RXPARITY | SR_RXFRAMING); + if (tiosp->c_iflag & BRKINT) + portp->rxmarkmsk |= SR_RXBREAK; + +/* + * Go through the char size, parity and stop bits and set all the + * option register appropriately. + */ + switch (tiosp->c_cflag & CSIZE) { + case CS5: + mr1 |= MR1_CS5; + break; + case CS6: + mr1 |= MR1_CS6; + break; + case CS7: + mr1 |= MR1_CS7; + break; + default: + mr1 |= MR1_CS8; + break; + } + + if (tiosp->c_cflag & CSTOPB) + mr2 |= MR2_STOP2; + else + mr2 |= MR2_STOP1; + + if (tiosp->c_cflag & PARENB) { + if (tiosp->c_cflag & PARODD) + mr1 |= (MR1_PARENB | MR1_PARODD); + else + mr1 |= (MR1_PARENB | MR1_PAREVEN); + } else + mr1 |= MR1_PARNONE; + + mr1 |= MR1_ERRBLOCK; + +/* + * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing + * space for hardware flow control and the like. This should be set to + * VMIN. + */ + mr2 |= MR2_RXFIFOHALF; + +/* + * Calculate the baud rate timers. For now we will just assume that + * the input and output baud are the same. The sc26198 has a fixed + * baud rate table, so only discrete baud rates possible. + */ + baudrate = tiosp->c_cflag & CBAUD; + if (baudrate & CBAUDEX) { + baudrate &= ~CBAUDEX; + if ((baudrate < 1) || (baudrate > 4)) + tiosp->c_cflag &= ~CBAUDEX; + else + baudrate += 15; + } + baudrate = stl_baudrates[baudrate]; + if ((tiosp->c_cflag & CBAUD) == B38400) { + if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + baudrate = 57600; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + baudrate = 115200; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + baudrate = 230400; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + baudrate = 460800; + else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) + baudrate = (portp->baud_base / portp->custom_divisor); + } + if (baudrate > STL_SC26198MAXBAUD) + baudrate = STL_SC26198MAXBAUD; + + if (baudrate > 0) + for (clk = 0; clk < SC26198_NRBAUDS; clk++) + if (baudrate <= sc26198_baudtable[clk]) + break; + +/* + * Check what form of modem signaling is required and set it up. + */ + if (tiosp->c_cflag & CLOCAL) { + portp->port.flags &= ~ASYNC_CHECK_CD; + } else { + iopr |= IOPR_DCDCOS; + imron |= IR_IOPORT; + portp->port.flags |= ASYNC_CHECK_CD; + } + +/* + * Setup sc26198 enhanced modes if we can. In particular we want to + * handle as much of the flow control as possible automatically. As + * well as saving a few CPU cycles it will also greatly improve flow + * control reliability. + */ + if (tiosp->c_iflag & IXON) { + mr0 |= MR0_SWFTX | MR0_SWFT; + imron |= IR_XONXOFF; + } else + imroff |= IR_XONXOFF; + + if (tiosp->c_iflag & IXOFF) + mr0 |= MR0_SWFRX; + + if (tiosp->c_cflag & CRTSCTS) { + mr2 |= MR2_AUTOCTS; + mr1 |= MR1_AUTORTS; + } + +/* + * All sc26198 register values calculated so go through and set + * them all up. + */ + + pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", + portp->portnr, portp->panelnr, portp->brdnr); + pr_debug(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk); + pr_debug(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff); + pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n", + tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], + tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_sc26198setreg(portp, IMR, 0); + stl_sc26198updatereg(portp, MR0, mr0); + stl_sc26198updatereg(portp, MR1, mr1); + stl_sc26198setreg(portp, SCCR, CR_RXERRBLOCK); + stl_sc26198updatereg(portp, MR2, mr2); + stl_sc26198updatereg(portp, IOPIOR, + ((stl_sc26198getreg(portp, IOPIOR) & ~IPR_CHANGEMASK) | iopr)); + + if (baudrate > 0) { + stl_sc26198setreg(portp, TXCSR, clk); + stl_sc26198setreg(portp, RXCSR, clk); + } + + stl_sc26198setreg(portp, XONCR, tiosp->c_cc[VSTART]); + stl_sc26198setreg(portp, XOFFCR, tiosp->c_cc[VSTOP]); + + ipr = stl_sc26198getreg(portp, IPR); + if (ipr & IPR_DCD) + portp->sigs &= ~TIOCM_CD; + else + portp->sigs |= TIOCM_CD; + + portp->imr = (portp->imr & ~imroff) | imron; + stl_sc26198setreg(portp, IMR, portp->imr); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Set the state of the DTR and RTS signals. + */ + +static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts) +{ + unsigned char iopioron, iopioroff; + unsigned long flags; + + pr_debug("stl_sc26198setsignals(portp=%p,dtr=%d,rts=%d)\n", portp, + dtr, rts); + + iopioron = 0; + iopioroff = 0; + if (dtr == 0) + iopioroff |= IPR_DTR; + else if (dtr > 0) + iopioron |= IPR_DTR; + if (rts == 0) + iopioroff |= IPR_RTS; + else if (rts > 0) + iopioron |= IPR_RTS; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_sc26198setreg(portp, IOPIOR, + ((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron)); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Return the state of the signals. + */ + +static int stl_sc26198getsignals(struct stlport *portp) +{ + unsigned char ipr; + unsigned long flags; + int sigs; + + pr_debug("stl_sc26198getsignals(portp=%p)\n", portp); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + ipr = stl_sc26198getreg(portp, IPR); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); + + sigs = 0; + sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD; + sigs |= (ipr & IPR_CTS) ? 0 : TIOCM_CTS; + sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR; + sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS; + sigs |= TIOCM_DSR; + return sigs; +} + +/*****************************************************************************/ + +/* + * Enable/Disable the Transmitter and/or Receiver. + */ + +static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx) +{ + unsigned char ccr; + unsigned long flags; + + pr_debug("stl_sc26198enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx,tx); + + ccr = portp->crenable; + if (tx == 0) + ccr &= ~CR_TXENABLE; + else if (tx > 0) + ccr |= CR_TXENABLE; + if (rx == 0) + ccr &= ~CR_RXENABLE; + else if (rx > 0) + ccr |= CR_RXENABLE; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_sc26198setreg(portp, SCCR, ccr); + BRDDISABLE(portp->brdnr); + portp->crenable = ccr; + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Start/stop the Transmitter and/or Receiver. + */ + +static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx) +{ + unsigned char imr; + unsigned long flags; + + pr_debug("stl_sc26198startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx); + + imr = portp->imr; + if (tx == 0) + imr &= ~IR_TXRDY; + else if (tx == 1) + imr |= IR_TXRDY; + if (rx == 0) + imr &= ~(IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG); + else if (rx > 0) + imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_sc26198setreg(portp, IMR, imr); + BRDDISABLE(portp->brdnr); + portp->imr = imr; + if (tx > 0) + set_bit(ASYI_TXBUSY, &portp->istate); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Disable all interrupts from this port. + */ + +static void stl_sc26198disableintrs(struct stlport *portp) +{ + unsigned long flags; + + pr_debug("stl_sc26198disableintrs(portp=%p)\n", portp); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + portp->imr = 0; + stl_sc26198setreg(portp, IMR, 0); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +static void stl_sc26198sendbreak(struct stlport *portp, int len) +{ + unsigned long flags; + + pr_debug("stl_sc26198sendbreak(portp=%p,len=%d)\n", portp, len); + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + if (len == 1) { + stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK); + portp->stats.txbreaks++; + } else + stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK); + + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Take flow control actions... + */ + +static void stl_sc26198flowctrl(struct stlport *portp, int state) +{ + struct tty_struct *tty; + unsigned long flags; + unsigned char mr0; + + pr_debug("stl_sc26198flowctrl(portp=%p,state=%x)\n", portp, state); + + if (portp == NULL) + return; + tty = tty_port_tty_get(&portp->port); + if (tty == NULL) + return; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + + if (state) { + if (tty->termios->c_iflag & IXOFF) { + mr0 = stl_sc26198getreg(portp, MR0); + stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); + stl_sc26198setreg(portp, SCCR, CR_TXSENDXON); + mr0 |= MR0_SWFRX; + portp->stats.rxxon++; + stl_sc26198wait(portp); + stl_sc26198setreg(portp, MR0, mr0); + } +/* + * Question: should we return RTS to what it was before? It may + * have been set by an ioctl... Suppose not, since if you have + * hardware flow control set then it is pretty silly to go and + * set the RTS line by hand. + */ + if (tty->termios->c_cflag & CRTSCTS) { + stl_sc26198setreg(portp, MR1, + (stl_sc26198getreg(portp, MR1) | MR1_AUTORTS)); + stl_sc26198setreg(portp, IOPIOR, + (stl_sc26198getreg(portp, IOPIOR) | IOPR_RTS)); + portp->stats.rxrtson++; + } + } else { + if (tty->termios->c_iflag & IXOFF) { + mr0 = stl_sc26198getreg(portp, MR0); + stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); + stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF); + mr0 &= ~MR0_SWFRX; + portp->stats.rxxoff++; + stl_sc26198wait(portp); + stl_sc26198setreg(portp, MR0, mr0); + } + if (tty->termios->c_cflag & CRTSCTS) { + stl_sc26198setreg(portp, MR1, + (stl_sc26198getreg(portp, MR1) & ~MR1_AUTORTS)); + stl_sc26198setreg(portp, IOPIOR, + (stl_sc26198getreg(portp, IOPIOR) & ~IOPR_RTS)); + portp->stats.rxrtsoff++; + } + } + + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); + tty_kref_put(tty); +} + +/*****************************************************************************/ + +/* + * Send a flow control character. + */ + +static void stl_sc26198sendflow(struct stlport *portp, int state) +{ + struct tty_struct *tty; + unsigned long flags; + unsigned char mr0; + + pr_debug("stl_sc26198sendflow(portp=%p,state=%x)\n", portp, state); + + if (portp == NULL) + return; + tty = tty_port_tty_get(&portp->port); + if (tty == NULL) + return; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + if (state) { + mr0 = stl_sc26198getreg(portp, MR0); + stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); + stl_sc26198setreg(portp, SCCR, CR_TXSENDXON); + mr0 |= MR0_SWFRX; + portp->stats.rxxon++; + stl_sc26198wait(portp); + stl_sc26198setreg(portp, MR0, mr0); + } else { + mr0 = stl_sc26198getreg(portp, MR0); + stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); + stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF); + mr0 &= ~MR0_SWFRX; + portp->stats.rxxoff++; + stl_sc26198wait(portp); + stl_sc26198setreg(portp, MR0, mr0); + } + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); + tty_kref_put(tty); +} + +/*****************************************************************************/ + +static void stl_sc26198flush(struct stlport *portp) +{ + unsigned long flags; + + pr_debug("stl_sc26198flush(portp=%p)\n", portp); + + if (portp == NULL) + return; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + stl_sc26198setreg(portp, SCCR, CR_TXRESET); + stl_sc26198setreg(portp, SCCR, portp->crenable); + BRDDISABLE(portp->brdnr); + portp->tx.tail = portp->tx.head; + spin_unlock_irqrestore(&brd_lock, flags); +} + +/*****************************************************************************/ + +/* + * Return the current state of data flow on this port. This is only + * really interesting when determining if data has fully completed + * transmission or not... The sc26198 interrupt scheme cannot + * determine when all data has actually drained, so we need to + * check the port statusy register to be sure. + */ + +static int stl_sc26198datastate(struct stlport *portp) +{ + unsigned long flags; + unsigned char sr; + + pr_debug("stl_sc26198datastate(portp=%p)\n", portp); + + if (portp == NULL) + return 0; + if (test_bit(ASYI_TXBUSY, &portp->istate)) + return 1; + + spin_lock_irqsave(&brd_lock, flags); + BRDENABLE(portp->brdnr, portp->pagenr); + sr = stl_sc26198getreg(portp, SR); + BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); + + return (sr & SR_TXEMPTY) ? 0 : 1; +} + +/*****************************************************************************/ + +/* + * Delay for a small amount of time, to give the sc26198 a chance + * to process a command... + */ + +static void stl_sc26198wait(struct stlport *portp) +{ + int i; + + pr_debug("stl_sc26198wait(portp=%p)\n", portp); + + if (portp == NULL) + return; + + for (i = 0; i < 20; i++) + stl_sc26198getglobreg(portp, TSTR); +} + +/*****************************************************************************/ + +/* + * If we are TX flow controlled and in IXANY mode then we may + * need to unflow control here. We gotta do this because of the + * automatic flow control modes of the sc26198. + */ + +static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty) +{ + unsigned char mr0; + + mr0 = stl_sc26198getreg(portp, MR0); + stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); + stl_sc26198setreg(portp, SCCR, CR_HOSTXON); + stl_sc26198wait(portp); + stl_sc26198setreg(portp, MR0, mr0); + clear_bit(ASYI_TXFLOWED, &portp->istate); +} + +/*****************************************************************************/ + +/* + * Interrupt service routine for sc26198 panels. + */ + +static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase) +{ + struct stlport *portp; + unsigned int iack; + + spin_lock(&brd_lock); + +/* + * Work around bug in sc26198 chip... Cannot have A6 address + * line of UART high, else iack will be returned as 0. + */ + outb(0, (iobase + 1)); + + iack = inb(iobase + XP_IACK); + portp = panelp->ports[(iack & IVR_CHANMASK) + ((iobase & 0x4) << 1)]; + + if (iack & IVR_RXDATA) + stl_sc26198rxisr(portp, iack); + else if (iack & IVR_TXDATA) + stl_sc26198txisr(portp); + else + stl_sc26198otherisr(portp, iack); + + spin_unlock(&brd_lock); +} + +/*****************************************************************************/ + +/* + * Transmit interrupt handler. This has gotta be fast! Handling TX + * chars is pretty simple, stuff as many as possible from the TX buffer + * into the sc26198 FIFO. + * In practice it is possible that interrupts are enabled but that the + * port has been hung up. Need to handle not having any TX buffer here, + * this is done by using the side effect that head and tail will also + * be NULL if the buffer has been freed. + */ + +static void stl_sc26198txisr(struct stlport *portp) +{ + struct tty_struct *tty; + unsigned int ioaddr; + unsigned char mr0; + int len, stlen; + char *head, *tail; + + pr_debug("stl_sc26198txisr(portp=%p)\n", portp); + + ioaddr = portp->ioaddr; + head = portp->tx.head; + tail = portp->tx.tail; + len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); + if ((len == 0) || ((len < STL_TXBUFLOW) && + (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { + set_bit(ASYI_TXLOW, &portp->istate); + tty = tty_port_tty_get(&portp->port); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } + } + + if (len == 0) { + outb((MR0 | portp->uartaddr), (ioaddr + XP_ADDR)); + mr0 = inb(ioaddr + XP_DATA); + if ((mr0 & MR0_TXMASK) == MR0_TXEMPTY) { + portp->imr &= ~IR_TXRDY; + outb((IMR | portp->uartaddr), (ioaddr + XP_ADDR)); + outb(portp->imr, (ioaddr + XP_DATA)); + clear_bit(ASYI_TXBUSY, &portp->istate); + } else { + mr0 |= ((mr0 & ~MR0_TXMASK) | MR0_TXEMPTY); + outb(mr0, (ioaddr + XP_DATA)); + } + } else { + len = min(len, SC26198_TXFIFOSIZE); + portp->stats.txtotal += len; + stlen = min_t(unsigned int, len, + (portp->tx.buf + STL_TXBUFSIZE) - tail); + outb(GTXFIFO, (ioaddr + XP_ADDR)); + outsb((ioaddr + XP_DATA), tail, stlen); + len -= stlen; + tail += stlen; + if (tail >= (portp->tx.buf + STL_TXBUFSIZE)) + tail = portp->tx.buf; + if (len > 0) { + outsb((ioaddr + XP_DATA), tail, len); + tail += len; + } + portp->tx.tail = tail; + } +} + +/*****************************************************************************/ + +/* + * Receive character interrupt handler. Determine if we have good chars + * or bad chars and then process appropriately. Good chars are easy + * just shove the lot into the RX buffer and set all status byte to 0. + * If a bad RX char then process as required. This routine needs to be + * fast! In practice it is possible that we get an interrupt on a port + * that is closed. This can happen on hangups - since they completely + * shutdown a port not in user context. Need to handle this case. + */ + +static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack) +{ + struct tty_struct *tty; + unsigned int len, buflen, ioaddr; + + pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack); + + tty = tty_port_tty_get(&portp->port); + ioaddr = portp->ioaddr; + outb(GIBCR, (ioaddr + XP_ADDR)); + len = inb(ioaddr + XP_DATA) + 1; + + if ((iack & IVR_TYPEMASK) == IVR_RXDATA) { + if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { + len = min_t(unsigned int, len, sizeof(stl_unwanted)); + outb(GRXFIFO, (ioaddr + XP_ADDR)); + insb((ioaddr + XP_DATA), &stl_unwanted[0], len); + portp->stats.rxlost += len; + portp->stats.rxtotal += len; + } else { + len = min(len, buflen); + if (len > 0) { + unsigned char *ptr; + outb(GRXFIFO, (ioaddr + XP_ADDR)); + tty_prepare_flip_string(tty, &ptr, len); + insb((ioaddr + XP_DATA), ptr, len); + tty_schedule_flip(tty); + portp->stats.rxtotal += len; + } + } + } else { + stl_sc26198rxbadchars(portp); + } + +/* + * If we are TX flow controlled and in IXANY mode then we may need + * to unflow control here. We gotta do this because of the automatic + * flow control modes of the sc26198. + */ + if (test_bit(ASYI_TXFLOWED, &portp->istate)) { + if ((tty != NULL) && + (tty->termios != NULL) && + (tty->termios->c_iflag & IXANY)) { + stl_sc26198txunflow(portp, tty); + } + } + tty_kref_put(tty); +} + +/*****************************************************************************/ + +/* + * Process an RX bad character. + */ + +static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch) +{ + struct tty_struct *tty; + unsigned int ioaddr; + + tty = tty_port_tty_get(&portp->port); + ioaddr = portp->ioaddr; + + if (status & SR_RXPARITY) + portp->stats.rxparity++; + if (status & SR_RXFRAMING) + portp->stats.rxframing++; + if (status & SR_RXOVERRUN) + portp->stats.rxoverrun++; + if (status & SR_RXBREAK) + portp->stats.rxbreaks++; + + if ((tty != NULL) && + ((portp->rxignoremsk & status) == 0)) { + if (portp->rxmarkmsk & status) { + if (status & SR_RXBREAK) { + status = TTY_BREAK; + if (portp->port.flags & ASYNC_SAK) { + do_SAK(tty); + BRDENABLE(portp->brdnr, portp->pagenr); + } + } else if (status & SR_RXPARITY) + status = TTY_PARITY; + else if (status & SR_RXFRAMING) + status = TTY_FRAME; + else if(status & SR_RXOVERRUN) + status = TTY_OVERRUN; + else + status = 0; + } else + status = 0; + + tty_insert_flip_char(tty, ch, status); + tty_schedule_flip(tty); + + if (status == 0) + portp->stats.rxtotal++; + } + tty_kref_put(tty); +} + +/*****************************************************************************/ + +/* + * Process all characters in the RX FIFO of the UART. Check all char + * status bytes as well, and process as required. We need to check + * all bytes in the FIFO, in case some more enter the FIFO while we + * are here. To get the exact character error type we need to switch + * into CHAR error mode (that is why we need to make sure we empty + * the FIFO). + */ + +static void stl_sc26198rxbadchars(struct stlport *portp) +{ + unsigned char status, mr1; + char ch; + +/* + * To get the precise error type for each character we must switch + * back into CHAR error mode. + */ + mr1 = stl_sc26198getreg(portp, MR1); + stl_sc26198setreg(portp, MR1, (mr1 & ~MR1_ERRBLOCK)); + + while ((status = stl_sc26198getreg(portp, SR)) & SR_RXRDY) { + stl_sc26198setreg(portp, SCCR, CR_CLEARRXERR); + ch = stl_sc26198getreg(portp, RXFIFO); + stl_sc26198rxbadch(portp, status, ch); + } + +/* + * To get correct interrupt class we must switch back into BLOCK + * error mode. + */ + stl_sc26198setreg(portp, MR1, mr1); +} + +/*****************************************************************************/ + +/* + * Other interrupt handler. This includes modem signals, flow + * control actions, etc. Most stuff is left to off-level interrupt + * processing time. + */ + +static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack) +{ + unsigned char cir, ipr, xisr; + + pr_debug("stl_sc26198otherisr(portp=%p,iack=%x)\n", portp, iack); + + cir = stl_sc26198getglobreg(portp, CIR); + + switch (cir & CIR_SUBTYPEMASK) { + case CIR_SUBCOS: + ipr = stl_sc26198getreg(portp, IPR); + if (ipr & IPR_DCDCHANGE) { + stl_cd_change(portp); + portp->stats.modem++; + } + break; + case CIR_SUBXONXOFF: + xisr = stl_sc26198getreg(portp, XISR); + if (xisr & XISR_RXXONGOT) { + set_bit(ASYI_TXFLOWED, &portp->istate); + portp->stats.txxoff++; + } + if (xisr & XISR_RXXOFFGOT) { + clear_bit(ASYI_TXFLOWED, &portp->istate); + portp->stats.txxon++; + } + break; + case CIR_SUBBREAK: + stl_sc26198setreg(portp, SCCR, CR_BREAKRESET); + stl_sc26198rxbadchars(portp); + break; + default: + break; + } +} + +static void stl_free_isabrds(void) +{ + struct stlbrd *brdp; + unsigned int i; + + for (i = 0; i < stl_nrbrds; i++) { + if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED)) + continue; + + free_irq(brdp->irq, brdp); + + stl_cleanup_panels(brdp); + + release_region(brdp->ioaddr1, brdp->iosize1); + if (brdp->iosize2 > 0) + release_region(brdp->ioaddr2, brdp->iosize2); + + kfree(brdp); + stl_brds[i] = NULL; + } +} + +/* + * Loadable module initialization stuff. + */ +static int __init stallion_module_init(void) +{ + struct stlbrd *brdp; + struct stlconf conf; + unsigned int i, j; + int retval; + + printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion); + + spin_lock_init(&stallion_lock); + spin_lock_init(&brd_lock); + + stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); + if (!stl_serial) { + retval = -ENOMEM; + goto err; + } + + stl_serial->owner = THIS_MODULE; + stl_serial->driver_name = stl_drvname; + stl_serial->name = "ttyE"; + stl_serial->major = STL_SERIALMAJOR; + stl_serial->minor_start = 0; + stl_serial->type = TTY_DRIVER_TYPE_SERIAL; + stl_serial->subtype = SERIAL_TYPE_NORMAL; + stl_serial->init_termios = stl_deftermios; + stl_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(stl_serial, &stl_ops); + + retval = tty_register_driver(stl_serial); + if (retval) { + printk("STALLION: failed to register serial driver\n"); + goto err_frtty; + } + +/* + * Find any dynamically supported boards. That is via module load + * line options. + */ + for (i = stl_nrbrds; i < stl_nargs; i++) { + memset(&conf, 0, sizeof(conf)); + if (stl_parsebrd(&conf, stl_brdsp[i]) == 0) + continue; + if ((brdp = stl_allocbrd()) == NULL) + continue; + brdp->brdnr = i; + brdp->brdtype = conf.brdtype; + brdp->ioaddr1 = conf.ioaddr1; + brdp->ioaddr2 = conf.ioaddr2; + brdp->irq = conf.irq; + brdp->irqtype = conf.irqtype; + stl_brds[brdp->brdnr] = brdp; + if (stl_brdinit(brdp)) { + stl_brds[brdp->brdnr] = NULL; + kfree(brdp); + } else { + for (j = 0; j < brdp->nrports; j++) + tty_register_device(stl_serial, + brdp->brdnr * STL_MAXPORTS + j, NULL); + stl_nrbrds = i + 1; + } + } + + /* this has to be _after_ isa finding because of locking */ + retval = pci_register_driver(&stl_pcidriver); + if (retval && stl_nrbrds == 0) { + printk(KERN_ERR "STALLION: can't register pci driver\n"); + goto err_unrtty; + } + +/* + * Set up a character driver for per board stuff. This is mainly used + * to do stats ioctls on the ports. + */ + if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem)) + printk("STALLION: failed to register serial board device\n"); + + stallion_class = class_create(THIS_MODULE, "staliomem"); + if (IS_ERR(stallion_class)) + printk("STALLION: failed to create class\n"); + for (i = 0; i < 4; i++) + device_create(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i), + NULL, "staliomem%d", i); + + return 0; +err_unrtty: + tty_unregister_driver(stl_serial); +err_frtty: + put_tty_driver(stl_serial); +err: + return retval; +} + +static void __exit stallion_module_exit(void) +{ + struct stlbrd *brdp; + unsigned int i, j; + + pr_debug("cleanup_module()\n"); + + printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle, + stl_drvversion); + +/* + * Free up all allocated resources used by the ports. This includes + * memory and interrupts. As part of this process we will also do + * a hangup on every open port - to try to flush out any processes + * hanging onto ports. + */ + for (i = 0; i < stl_nrbrds; i++) { + if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED)) + continue; + for (j = 0; j < brdp->nrports; j++) + tty_unregister_device(stl_serial, + brdp->brdnr * STL_MAXPORTS + j); + } + + for (i = 0; i < 4; i++) + device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i)); + unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"); + class_destroy(stallion_class); + + pci_unregister_driver(&stl_pcidriver); + + stl_free_isabrds(); + + tty_unregister_driver(stl_serial); + put_tty_driver(stl_serial); +} + +module_init(stallion_module_init); +module_exit(stallion_module_exit); + +MODULE_AUTHOR("Greg Ungerer"); +MODULE_DESCRIPTION("Stallion Multiport Serial Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.2 From 4c37705877e74c02c968735c2eee0f84914cf557 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 22 Feb 2011 17:09:33 -0800 Subject: tty: move obsolete and broken generic_serial drivers to drivers/staging/generic_serial/ As planned by Arnd Bergmann, this moves the following drivers to the drivers/staging/generic_serial directory where they will be removed after 2.6.41 if no one steps up to claim them. generic_serial rio ser_a2232 sx vme_scc Cc: Arnd Bergmann Cc: Alan Cox Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/char/Kconfig | 44 - drivers/char/Makefile | 6 - drivers/char/generic_serial.c | 844 ------ drivers/char/rio/Makefile | 12 - drivers/char/rio/board.h | 132 - drivers/char/rio/cirrus.h | 210 -- drivers/char/rio/cmdblk.h | 53 - drivers/char/rio/cmdpkt.h | 177 -- drivers/char/rio/daemon.h | 307 --- drivers/char/rio/errors.h | 98 - drivers/char/rio/func.h | 143 - drivers/char/rio/host.h | 123 - drivers/char/rio/link.h | 96 - drivers/char/rio/linux_compat.h | 77 - drivers/char/rio/map.h | 98 - drivers/char/rio/param.h | 55 - drivers/char/rio/parmmap.h | 81 - drivers/char/rio/pci.h | 72 - drivers/char/rio/phb.h | 142 - drivers/char/rio/pkt.h | 77 - drivers/char/rio/port.h | 179 -- drivers/char/rio/protsts.h | 110 - drivers/char/rio/rio.h | 208 -- drivers/char/rio/rio_linux.c | 1204 --------- drivers/char/rio/rio_linux.h | 197 -- drivers/char/rio/rioboard.h | 275 -- drivers/char/rio/rioboot.c | 1113 -------- drivers/char/rio/riocmd.c | 939 ------- drivers/char/rio/rioctrl.c | 1504 ----------- drivers/char/rio/riodrvr.h | 138 - drivers/char/rio/rioinfo.h | 92 - drivers/char/rio/rioinit.c | 421 --- drivers/char/rio/riointr.c | 645 ----- drivers/char/rio/rioioctl.h | 57 - drivers/char/rio/rioparam.c | 663 ----- drivers/char/rio/rioroute.c | 1039 -------- drivers/char/rio/riospace.h | 154 -- drivers/char/rio/riotable.c | 941 ------- drivers/char/rio/riotty.c | 654 ----- drivers/char/rio/route.h | 101 - drivers/char/rio/rup.h | 69 - drivers/char/rio/unixrup.h | 51 - drivers/char/ser_a2232.c | 831 ------ drivers/char/ser_a2232.h | 202 -- drivers/char/ser_a2232fw.ax | 529 ---- drivers/char/ser_a2232fw.h | 306 --- drivers/char/sx.c | 2894 --------------------- drivers/char/sx.h | 201 -- drivers/char/sxboards.h | 206 -- drivers/char/sxwindow.h | 393 --- drivers/char/vme_scc.c | 1145 -------- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/generic_serial/Kconfig | 45 + drivers/staging/generic_serial/Makefile | 6 + drivers/staging/generic_serial/TODO | 6 + drivers/staging/generic_serial/generic_serial.c | 844 ++++++ drivers/staging/generic_serial/rio/Makefile | 12 + drivers/staging/generic_serial/rio/board.h | 132 + drivers/staging/generic_serial/rio/cirrus.h | 210 ++ drivers/staging/generic_serial/rio/cmdblk.h | 53 + drivers/staging/generic_serial/rio/cmdpkt.h | 177 ++ drivers/staging/generic_serial/rio/daemon.h | 307 +++ drivers/staging/generic_serial/rio/errors.h | 98 + drivers/staging/generic_serial/rio/func.h | 143 + drivers/staging/generic_serial/rio/host.h | 123 + drivers/staging/generic_serial/rio/link.h | 96 + drivers/staging/generic_serial/rio/linux_compat.h | 77 + drivers/staging/generic_serial/rio/map.h | 98 + drivers/staging/generic_serial/rio/param.h | 55 + drivers/staging/generic_serial/rio/parmmap.h | 81 + drivers/staging/generic_serial/rio/pci.h | 72 + drivers/staging/generic_serial/rio/phb.h | 142 + drivers/staging/generic_serial/rio/pkt.h | 77 + drivers/staging/generic_serial/rio/port.h | 179 ++ drivers/staging/generic_serial/rio/protsts.h | 110 + drivers/staging/generic_serial/rio/rio.h | 208 ++ drivers/staging/generic_serial/rio/rio_linux.c | 1204 +++++++++ drivers/staging/generic_serial/rio/rio_linux.h | 197 ++ drivers/staging/generic_serial/rio/rioboard.h | 275 ++ drivers/staging/generic_serial/rio/rioboot.c | 1113 ++++++++ drivers/staging/generic_serial/rio/riocmd.c | 939 +++++++ drivers/staging/generic_serial/rio/rioctrl.c | 1504 +++++++++++ drivers/staging/generic_serial/rio/riodrvr.h | 138 + drivers/staging/generic_serial/rio/rioinfo.h | 92 + drivers/staging/generic_serial/rio/rioinit.c | 421 +++ drivers/staging/generic_serial/rio/riointr.c | 645 +++++ drivers/staging/generic_serial/rio/rioioctl.h | 57 + drivers/staging/generic_serial/rio/rioparam.c | 663 +++++ drivers/staging/generic_serial/rio/rioroute.c | 1039 ++++++++ drivers/staging/generic_serial/rio/riospace.h | 154 ++ drivers/staging/generic_serial/rio/riotable.c | 941 +++++++ drivers/staging/generic_serial/rio/riotty.c | 654 +++++ drivers/staging/generic_serial/rio/route.h | 101 + drivers/staging/generic_serial/rio/rup.h | 69 + drivers/staging/generic_serial/rio/unixrup.h | 51 + drivers/staging/generic_serial/ser_a2232.c | 831 ++++++ drivers/staging/generic_serial/ser_a2232.h | 202 ++ drivers/staging/generic_serial/ser_a2232fw.ax | 529 ++++ drivers/staging/generic_serial/ser_a2232fw.h | 306 +++ drivers/staging/generic_serial/sx.c | 2894 +++++++++++++++++++++ drivers/staging/generic_serial/sx.h | 201 ++ drivers/staging/generic_serial/sxboards.h | 206 ++ drivers/staging/generic_serial/sxwindow.h | 393 +++ drivers/staging/generic_serial/vme_scc.c | 1145 ++++++++ 105 files changed, 20318 insertions(+), 20308 deletions(-) delete mode 100644 drivers/char/generic_serial.c delete mode 100644 drivers/char/rio/Makefile delete mode 100644 drivers/char/rio/board.h delete mode 100644 drivers/char/rio/cirrus.h delete mode 100644 drivers/char/rio/cmdblk.h delete mode 100644 drivers/char/rio/cmdpkt.h delete mode 100644 drivers/char/rio/daemon.h delete mode 100644 drivers/char/rio/errors.h delete mode 100644 drivers/char/rio/func.h delete mode 100644 drivers/char/rio/host.h delete mode 100644 drivers/char/rio/link.h delete mode 100644 drivers/char/rio/linux_compat.h delete mode 100644 drivers/char/rio/map.h delete mode 100644 drivers/char/rio/param.h delete mode 100644 drivers/char/rio/parmmap.h delete mode 100644 drivers/char/rio/pci.h delete mode 100644 drivers/char/rio/phb.h delete mode 100644 drivers/char/rio/pkt.h delete mode 100644 drivers/char/rio/port.h delete mode 100644 drivers/char/rio/protsts.h delete mode 100644 drivers/char/rio/rio.h delete mode 100644 drivers/char/rio/rio_linux.c delete mode 100644 drivers/char/rio/rio_linux.h delete mode 100644 drivers/char/rio/rioboard.h delete mode 100644 drivers/char/rio/rioboot.c delete mode 100644 drivers/char/rio/riocmd.c delete mode 100644 drivers/char/rio/rioctrl.c delete mode 100644 drivers/char/rio/riodrvr.h delete mode 100644 drivers/char/rio/rioinfo.h delete mode 100644 drivers/char/rio/rioinit.c delete mode 100644 drivers/char/rio/riointr.c delete mode 100644 drivers/char/rio/rioioctl.h delete mode 100644 drivers/char/rio/rioparam.c delete mode 100644 drivers/char/rio/rioroute.c delete mode 100644 drivers/char/rio/riospace.h delete mode 100644 drivers/char/rio/riotable.c delete mode 100644 drivers/char/rio/riotty.c delete mode 100644 drivers/char/rio/route.h delete mode 100644 drivers/char/rio/rup.h delete mode 100644 drivers/char/rio/unixrup.h delete mode 100644 drivers/char/ser_a2232.c delete mode 100644 drivers/char/ser_a2232.h delete mode 100644 drivers/char/ser_a2232fw.ax delete mode 100644 drivers/char/ser_a2232fw.h delete mode 100644 drivers/char/sx.c delete mode 100644 drivers/char/sx.h delete mode 100644 drivers/char/sxboards.h delete mode 100644 drivers/char/sxwindow.h delete mode 100644 drivers/char/vme_scc.c create mode 100644 drivers/staging/generic_serial/Kconfig create mode 100644 drivers/staging/generic_serial/Makefile create mode 100644 drivers/staging/generic_serial/TODO create mode 100644 drivers/staging/generic_serial/generic_serial.c create mode 100644 drivers/staging/generic_serial/rio/Makefile create mode 100644 drivers/staging/generic_serial/rio/board.h create mode 100644 drivers/staging/generic_serial/rio/cirrus.h create mode 100644 drivers/staging/generic_serial/rio/cmdblk.h create mode 100644 drivers/staging/generic_serial/rio/cmdpkt.h create mode 100644 drivers/staging/generic_serial/rio/daemon.h create mode 100644 drivers/staging/generic_serial/rio/errors.h create mode 100644 drivers/staging/generic_serial/rio/func.h create mode 100644 drivers/staging/generic_serial/rio/host.h create mode 100644 drivers/staging/generic_serial/rio/link.h create mode 100644 drivers/staging/generic_serial/rio/linux_compat.h create mode 100644 drivers/staging/generic_serial/rio/map.h create mode 100644 drivers/staging/generic_serial/rio/param.h create mode 100644 drivers/staging/generic_serial/rio/parmmap.h create mode 100644 drivers/staging/generic_serial/rio/pci.h create mode 100644 drivers/staging/generic_serial/rio/phb.h create mode 100644 drivers/staging/generic_serial/rio/pkt.h create mode 100644 drivers/staging/generic_serial/rio/port.h create mode 100644 drivers/staging/generic_serial/rio/protsts.h create mode 100644 drivers/staging/generic_serial/rio/rio.h create mode 100644 drivers/staging/generic_serial/rio/rio_linux.c create mode 100644 drivers/staging/generic_serial/rio/rio_linux.h create mode 100644 drivers/staging/generic_serial/rio/rioboard.h create mode 100644 drivers/staging/generic_serial/rio/rioboot.c create mode 100644 drivers/staging/generic_serial/rio/riocmd.c create mode 100644 drivers/staging/generic_serial/rio/rioctrl.c create mode 100644 drivers/staging/generic_serial/rio/riodrvr.h create mode 100644 drivers/staging/generic_serial/rio/rioinfo.h create mode 100644 drivers/staging/generic_serial/rio/rioinit.c create mode 100644 drivers/staging/generic_serial/rio/riointr.c create mode 100644 drivers/staging/generic_serial/rio/rioioctl.h create mode 100644 drivers/staging/generic_serial/rio/rioparam.c create mode 100644 drivers/staging/generic_serial/rio/rioroute.c create mode 100644 drivers/staging/generic_serial/rio/riospace.h create mode 100644 drivers/staging/generic_serial/rio/riotable.c create mode 100644 drivers/staging/generic_serial/rio/riotty.c create mode 100644 drivers/staging/generic_serial/rio/route.h create mode 100644 drivers/staging/generic_serial/rio/rup.h create mode 100644 drivers/staging/generic_serial/rio/unixrup.h create mode 100644 drivers/staging/generic_serial/ser_a2232.c create mode 100644 drivers/staging/generic_serial/ser_a2232.h create mode 100644 drivers/staging/generic_serial/ser_a2232fw.ax create mode 100644 drivers/staging/generic_serial/ser_a2232fw.h create mode 100644 drivers/staging/generic_serial/sx.c create mode 100644 drivers/staging/generic_serial/sx.h create mode 100644 drivers/staging/generic_serial/sxboards.h create mode 100644 drivers/staging/generic_serial/sxwindow.h create mode 100644 drivers/staging/generic_serial/vme_scc.c diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 7b8cf0295f6c..04f8b2d083c6 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -15,34 +15,6 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". -config SX - tristate "Specialix SX (and SI) card support" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN - help - This is a driver for the SX and SI multiport serial cards. - Please read the file for details. - - This driver can only be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called sx. If you want to do that, say M here. - -config RIO - tristate "Specialix RIO system support" - depends on SERIAL_NONSTANDARD && BROKEN - help - This is a driver for the Specialix RIO, a smart serial card which - drives an outboard box that can support up to 128 ports. Product - information is at . - There are both ISA and PCI versions. - -config RIO_OLDPCI - bool "Support really old RIO/PCI cards" - depends on RIO - help - Older RIO PCI cards need some initialization-time configuration to - determine the IRQ and some control addresses. If you have a RIO and - this doesn't seem to work, try setting this to Y. - config STALDRV bool "Stallion multiport serial support" depends on SERIAL_NONSTANDARD @@ -55,22 +27,6 @@ config STALDRV in this case. If you have never heard about all this, it's safe to say N. -config A2232 - tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ZORRO && BROKEN - ---help--- - This option supports the 2232 7-port serial card shipped with the - Amiga 2000 and other Zorro-bus machines, dating from 1989. At - a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip - each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The - ports were connected with 8 pin DIN connectors on the card bracket, - for which 8 pin to DB25 adapters were supplied. The card also had - jumpers internally to toggle various pinning configurations. - - This driver can be built as a module; but then "generic_serial" - will also be built as a module. This has to be loaded before - "ser_a2232". If you want to do this, answer M here. - config SGI_SNSC bool "SGI Altix system controller communication support" depends on (IA64_SGI_SN2 || IA64_GENERIC) diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 48bb8acbea49..3ca1f627be8a 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -5,13 +5,7 @@ obj-y += mem.o random.o obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o obj-y += misc.o -obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -obj-$(CONFIG_SX) += sx.o generic_serial.o -obj-$(CONFIG_RIO) += rio/ generic_serial.o obj-$(CONFIG_RAW_DRIVER) += raw.o obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o obj-$(CONFIG_MSPEC) += mspec.o diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c deleted file mode 100644 index 5954ee1dc953..000000000000 --- a/drivers/char/generic_serial.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * generic_serial.c - * - * Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl - * - * written for the SX serial driver. - * Contains the code that should be shared over all the serial drivers. - * - * Credit for the idea to do it this way might go to Alan Cox. - * - * - * Version 0.1 -- December, 1998. Initial version. - * Version 0.2 -- March, 1999. Some more routines. Bugfixes. Etc. - * Version 0.5 -- August, 1999. Some more fixes. Reformat for Linus. - * - * BitWizard is actively maintaining this file. We sometimes find - * that someone submitted changes to this file. We really appreciate - * your help, but please submit changes through us. We're doing our - * best to be responsive. -- REW - * */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEBUG - -static int gs_debug; - -#ifdef DEBUG -#define gs_dprintk(f, str...) if (gs_debug & f) printk (str) -#else -#define gs_dprintk(f, str...) /* nothing */ -#endif - -#define func_enter() gs_dprintk (GS_DEBUG_FLOW, "gs: enter %s\n", __func__) -#define func_exit() gs_dprintk (GS_DEBUG_FLOW, "gs: exit %s\n", __func__) - -#define RS_EVENT_WRITE_WAKEUP 1 - -module_param(gs_debug, int, 0644); - - -int gs_put_char(struct tty_struct * tty, unsigned char ch) -{ - struct gs_port *port; - - func_enter (); - - port = tty->driver_data; - - if (!port) return 0; - - if (! (port->port.flags & ASYNC_INITIALIZED)) return 0; - - /* Take a lock on the serial tranmit buffer! */ - mutex_lock(& port->port_write_mutex); - - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { - /* Sorry, buffer is full, drop character. Update statistics???? -- REW */ - mutex_unlock(&port->port_write_mutex); - return 0; - } - - port->xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= SERIAL_XMIT_SIZE - 1; - port->xmit_cnt++; /* Characters in buffer */ - - mutex_unlock(&port->port_write_mutex); - func_exit (); - return 1; -} - - -/* -> Problems to take into account are: -> -1- Interrupts that empty part of the buffer. -> -2- page faults on the access to userspace. -> -3- Other processes that are also trying to do a "write". -*/ - -int gs_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - struct gs_port *port; - int c, total = 0; - int t; - - func_enter (); - - port = tty->driver_data; - - if (!port) return 0; - - if (! (port->port.flags & ASYNC_INITIALIZED)) - return 0; - - /* get exclusive "write" access to this port (problem 3) */ - /* This is not a spinlock because we can have a disk access (page - fault) in copy_from_user */ - mutex_lock(& port->port_write_mutex); - - while (1) { - - c = count; - - /* This is safe because we "OWN" the "head". Noone else can - change the "head": we own the port_write_mutex. */ - /* Don't overrun the end of the buffer */ - t = SERIAL_XMIT_SIZE - port->xmit_head; - if (t < c) c = t; - - /* This is safe because the xmit_cnt can only decrease. This - would increase "t", so we might copy too little chars. */ - /* Don't copy past the "head" of the buffer */ - t = SERIAL_XMIT_SIZE - 1 - port->xmit_cnt; - if (t < c) c = t; - - /* Can't copy more? break out! */ - if (c <= 0) break; - - memcpy (port->xmit_buf + port->xmit_head, buf, c); - - port -> xmit_cnt += c; - port -> xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE -1); - buf += c; - count -= c; - total += c; - } - mutex_unlock(& port->port_write_mutex); - - gs_dprintk (GS_DEBUG_WRITE, "write: interrupts are %s\n", - (port->port.flags & GS_TX_INTEN)?"enabled": "disabled"); - - if (port->xmit_cnt && - !tty->stopped && - !tty->hw_stopped && - !(port->port.flags & GS_TX_INTEN)) { - port->port.flags |= GS_TX_INTEN; - port->rd->enable_tx_interrupts (port); - } - func_exit (); - return total; -} - - - -int gs_write_room(struct tty_struct * tty) -{ - struct gs_port *port = tty->driver_data; - int ret; - - func_enter (); - ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (ret < 0) - ret = 0; - func_exit (); - return ret; -} - - -int gs_chars_in_buffer(struct tty_struct *tty) -{ - struct gs_port *port = tty->driver_data; - func_enter (); - - func_exit (); - return port->xmit_cnt; -} - - -static int gs_real_chars_in_buffer(struct tty_struct *tty) -{ - struct gs_port *port; - func_enter (); - - port = tty->driver_data; - - if (!port->rd) return 0; - if (!port->rd->chars_in_buffer) return 0; - - func_exit (); - return port->xmit_cnt + port->rd->chars_in_buffer (port); -} - - -static int gs_wait_tx_flushed (void * ptr, unsigned long timeout) -{ - struct gs_port *port = ptr; - unsigned long end_jiffies; - int jiffies_to_transmit, charsleft = 0, rv = 0; - int rcib; - - func_enter(); - - gs_dprintk (GS_DEBUG_FLUSH, "port=%p.\n", port); - if (port) { - gs_dprintk (GS_DEBUG_FLUSH, "xmit_cnt=%x, xmit_buf=%p, tty=%p.\n", - port->xmit_cnt, port->xmit_buf, port->port.tty); - } - - if (!port || port->xmit_cnt < 0 || !port->xmit_buf) { - gs_dprintk (GS_DEBUG_FLUSH, "ERROR: !port, !port->xmit_buf or prot->xmit_cnt < 0.\n"); - func_exit(); - return -EINVAL; /* This is an error which we don't know how to handle. */ - } - - rcib = gs_real_chars_in_buffer(port->port.tty); - - if(rcib <= 0) { - gs_dprintk (GS_DEBUG_FLUSH, "nothing to wait for.\n"); - func_exit(); - return rv; - } - /* stop trying: now + twice the time it would normally take + seconds */ - if (timeout == 0) timeout = MAX_SCHEDULE_TIMEOUT; - end_jiffies = jiffies; - if (timeout != MAX_SCHEDULE_TIMEOUT) - end_jiffies += port->baud?(2 * rcib * 10 * HZ / port->baud):0; - end_jiffies += timeout; - - gs_dprintk (GS_DEBUG_FLUSH, "now=%lx, end=%lx (%ld).\n", - jiffies, end_jiffies, end_jiffies-jiffies); - - /* the expression is actually jiffies < end_jiffies, but that won't - work around the wraparound. Tricky eh? */ - while ((charsleft = gs_real_chars_in_buffer (port->port.tty)) && - time_after (end_jiffies, jiffies)) { - /* Units check: - chars * (bits/char) * (jiffies /sec) / (bits/sec) = jiffies! - check! */ - - charsleft += 16; /* Allow 16 chars more to be transmitted ... */ - jiffies_to_transmit = port->baud?(1 + charsleft * 10 * HZ / port->baud):0; - /* ^^^ Round up.... */ - if (jiffies_to_transmit <= 0) jiffies_to_transmit = 1; - - gs_dprintk (GS_DEBUG_FLUSH, "Expect to finish in %d jiffies " - "(%d chars).\n", jiffies_to_transmit, charsleft); - - msleep_interruptible(jiffies_to_msecs(jiffies_to_transmit)); - if (signal_pending (current)) { - gs_dprintk (GS_DEBUG_FLUSH, "Signal pending. Bombing out: "); - rv = -EINTR; - break; - } - } - - gs_dprintk (GS_DEBUG_FLUSH, "charsleft = %d.\n", charsleft); - set_current_state (TASK_RUNNING); - - func_exit(); - return rv; -} - - - -void gs_flush_buffer(struct tty_struct *tty) -{ - struct gs_port *port; - unsigned long flags; - - func_enter (); - - port = tty->driver_data; - - if (!port) return; - - /* XXX Would the write semaphore do? */ - spin_lock_irqsave (&port->driver_lock, flags); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore (&port->driver_lock, flags); - - tty_wakeup(tty); - func_exit (); -} - - -void gs_flush_chars(struct tty_struct * tty) -{ - struct gs_port *port; - - func_enter (); - - port = tty->driver_data; - - if (!port) return; - - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !port->xmit_buf) { - func_exit (); - return; - } - - /* Beats me -- REW */ - port->port.flags |= GS_TX_INTEN; - port->rd->enable_tx_interrupts (port); - func_exit (); -} - - -void gs_stop(struct tty_struct * tty) -{ - struct gs_port *port; - - func_enter (); - - port = tty->driver_data; - - if (!port) return; - - if (port->xmit_cnt && - port->xmit_buf && - (port->port.flags & GS_TX_INTEN) ) { - port->port.flags &= ~GS_TX_INTEN; - port->rd->disable_tx_interrupts (port); - } - func_exit (); -} - - -void gs_start(struct tty_struct * tty) -{ - struct gs_port *port; - - port = tty->driver_data; - - if (!port) return; - - if (port->xmit_cnt && - port->xmit_buf && - !(port->port.flags & GS_TX_INTEN) ) { - port->port.flags |= GS_TX_INTEN; - port->rd->enable_tx_interrupts (port); - } - func_exit (); -} - - -static void gs_shutdown_port (struct gs_port *port) -{ - unsigned long flags; - - func_enter(); - - if (!port) return; - - if (!(port->port.flags & ASYNC_INITIALIZED)) - return; - - spin_lock_irqsave(&port->driver_lock, flags); - - if (port->xmit_buf) { - free_page((unsigned long) port->xmit_buf); - port->xmit_buf = NULL; - } - - if (port->port.tty) - set_bit(TTY_IO_ERROR, &port->port.tty->flags); - - port->rd->shutdown_port (port); - - port->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->driver_lock, flags); - - func_exit(); -} - - -void gs_hangup(struct tty_struct *tty) -{ - struct gs_port *port; - unsigned long flags; - - func_enter (); - - port = tty->driver_data; - tty = port->port.tty; - if (!tty) - return; - - gs_shutdown_port (port); - spin_lock_irqsave(&port->port.lock, flags); - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE); - port->port.tty = NULL; - port->port.count = 0; - spin_unlock_irqrestore(&port->port.lock, flags); - - wake_up_interruptible(&port->port.open_wait); - func_exit (); -} - - -int gs_block_til_ready(void *port_, struct file * filp) -{ - struct gs_port *gp = port_; - struct tty_port *port = &gp->port; - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - int CD; - struct tty_struct *tty; - unsigned long flags; - - func_enter (); - - if (!port) return 0; - - tty = port->tty; - - gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n"); - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->close_wait); - if (port->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - gs_dprintk (GS_DEBUG_BTR, "after hung up\n"); - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - gs_dprintk (GS_DEBUG_BTR, "after nonblock\n"); - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - - add_wait_queue(&port->open_wait, &wait); - - gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n"); - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) { - port->count--; - } - port->blocked_open++; - spin_unlock_irqrestore(&port->lock, flags); - while (1) { - CD = tty_port_carrier_raised(port); - gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD); - set_current_state (TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->flags & ASYNC_INITIALIZED)) { - if (port->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n", - (int)signal_pending (current), *(long*)(¤t->blocked)); - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n", - port->blocked_open); - set_current_state (TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) { - port->count++; - } - port->blocked_open--; - if (retval == 0) - port->flags |= ASYNC_NORMAL_ACTIVE; - spin_unlock_irqrestore(&port->lock, flags); - func_exit (); - return retval; -} - - -void gs_close(struct tty_struct * tty, struct file * filp) -{ - unsigned long flags; - struct gs_port *port; - - func_enter (); - - port = tty->driver_data; - - if (!port) return; - - if (!port->port.tty) { - /* This seems to happen when this is called from vhangup. */ - gs_dprintk (GS_DEBUG_CLOSE, "gs: Odd: port->port.tty is NULL\n"); - port->port.tty = tty; - } - - spin_lock_irqsave(&port->port.lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->port.lock, flags); - if (port->rd->hungup) - port->rd->hungup (port); - func_exit (); - return; - } - - if ((tty->count == 1) && (port->port.count != 1)) { - printk(KERN_ERR "gs: gs_close port %p: bad port count;" - " tty->count is 1, port count is %d\n", port, port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_ERR "gs: gs_close port %p: bad port count: %d\n", port, port->port.count); - port->port.count = 0; - } - - if (port->port.count) { - gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->port.count); - spin_unlock_irqrestore(&port->port.lock, flags); - func_exit (); - return; - } - port->port.flags |= ASYNC_CLOSING; - - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - /* if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->closing_wait); */ - - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - - spin_lock_irqsave(&port->driver_lock, flags); - port->rd->disable_rx_interrupts (port); - spin_unlock_irqrestore(&port->driver_lock, flags); - spin_unlock_irqrestore(&port->port.lock, flags); - - /* close has no way of returning "EINTR", so discard return value */ - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - gs_wait_tx_flushed (port, port->closing_wait); - - port->port.flags &= ~GS_ACTIVE; - - gs_flush_buffer(tty); - - tty_ldisc_flush(tty); - tty->closing = 0; - - spin_lock_irqsave(&port->driver_lock, flags); - port->event = 0; - port->rd->close (port); - port->rd->shutdown_port (port); - spin_unlock_irqrestore(&port->driver_lock, flags); - - spin_lock_irqsave(&port->port.lock, flags); - port->port.tty = NULL; - - if (port->port.blocked_open) { - if (port->close_delay) { - spin_unlock_irqrestore(&port->port.lock, flags); - msleep_interruptible(jiffies_to_msecs(port->close_delay)); - spin_lock_irqsave(&port->port.lock, flags); - } - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED); - spin_unlock_irqrestore(&port->port.lock, flags); - wake_up_interruptible(&port->port.close_wait); - - func_exit (); -} - - -void gs_set_termios (struct tty_struct * tty, - struct ktermios * old_termios) -{ - struct gs_port *port; - int baudrate, tmp, rv; - struct ktermios *tiosp; - - func_enter(); - - port = tty->driver_data; - - if (!port) return; - if (!port->port.tty) { - /* This seems to happen when this is called after gs_close. */ - gs_dprintk (GS_DEBUG_TERMIOS, "gs: Odd: port->port.tty is NULL\n"); - port->port.tty = tty; - } - - - tiosp = tty->termios; - - if (gs_debug & GS_DEBUG_TERMIOS) { - gs_dprintk (GS_DEBUG_TERMIOS, "termios structure (%p):\n", tiosp); - } - - if(old_termios && (gs_debug & GS_DEBUG_TERMIOS)) { - if(tiosp->c_iflag != old_termios->c_iflag) printk("c_iflag changed\n"); - if(tiosp->c_oflag != old_termios->c_oflag) printk("c_oflag changed\n"); - if(tiosp->c_cflag != old_termios->c_cflag) printk("c_cflag changed\n"); - if(tiosp->c_lflag != old_termios->c_lflag) printk("c_lflag changed\n"); - if(tiosp->c_line != old_termios->c_line) printk("c_line changed\n"); - if(!memcmp(tiosp->c_cc, old_termios->c_cc, NCC)) printk("c_cc changed\n"); - } - - baudrate = tty_get_baud_rate(tty); - - if ((tiosp->c_cflag & CBAUD) == B38400) { - if ( (port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baudrate = 57600; - else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baudrate = 115200; - else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - baudrate = 230400; - else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - baudrate = 460800; - else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) - baudrate = (port->baud_base / port->custom_divisor); - } - - /* I recommend using THIS instead of the mess in termios (and - duplicating the above code). Next we should create a clean - interface towards this variable. If your card supports arbitrary - baud rates, (e.g. CD1400 or 16550 based cards) then everything - will be very easy..... */ - port->baud = baudrate; - - /* Two timer ticks seems enough to wakeup something like SLIP driver */ - /* Baudrate/10 is cps. Divide by HZ to get chars per tick. */ - tmp = (baudrate / 10 / HZ) * 2; - - if (tmp < 0) tmp = 0; - if (tmp >= SERIAL_XMIT_SIZE) tmp = SERIAL_XMIT_SIZE-1; - - port->wakeup_chars = tmp; - - /* We should really wait for the characters to be all sent before - changing the settings. -- CAL */ - rv = gs_wait_tx_flushed (port, MAX_SCHEDULE_TIMEOUT); - if (rv < 0) return /* rv */; - - rv = port->rd->set_real_termios(port); - if (rv < 0) return /* rv */; - - if ((!old_termios || - (old_termios->c_cflag & CRTSCTS)) && - !( tiosp->c_cflag & CRTSCTS)) { - tty->stopped = 0; - gs_start(tty); - } - -#ifdef tytso_patch_94Nov25_1726 - /* This "makes sense", Why is it commented out? */ - - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&port->gs.open_wait); -#endif - - func_exit(); - return /* 0 */; -} - - - -/* Must be called with interrupts enabled */ -int gs_init_port(struct gs_port *port) -{ - unsigned long flags; - - func_enter (); - - if (port->port.flags & ASYNC_INITIALIZED) { - func_exit (); - return 0; - } - if (!port->xmit_buf) { - /* We may sleep in get_zeroed_page() */ - unsigned long tmp; - - tmp = get_zeroed_page(GFP_KERNEL); - spin_lock_irqsave (&port->driver_lock, flags); - if (port->xmit_buf) - free_page (tmp); - else - port->xmit_buf = (unsigned char *) tmp; - spin_unlock_irqrestore(&port->driver_lock, flags); - if (!port->xmit_buf) { - func_exit (); - return -ENOMEM; - } - } - - spin_lock_irqsave (&port->driver_lock, flags); - if (port->port.tty) - clear_bit(TTY_IO_ERROR, &port->port.tty->flags); - mutex_init(&port->port_write_mutex); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore(&port->driver_lock, flags); - gs_set_termios(port->port.tty, NULL); - spin_lock_irqsave (&port->driver_lock, flags); - port->port.flags |= ASYNC_INITIALIZED; - port->port.flags &= ~GS_TX_INTEN; - - spin_unlock_irqrestore(&port->driver_lock, flags); - func_exit (); - return 0; -} - - -int gs_setserial(struct gs_port *port, struct serial_struct __user *sp) -{ - struct serial_struct sio; - - if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) - return(-EFAULT); - - if (!capable(CAP_SYS_ADMIN)) { - if ((sio.baud_base != port->baud_base) || - (sio.close_delay != port->close_delay) || - ((sio.flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) - return(-EPERM); - } - - port->port.flags = (port->port.flags & ~ASYNC_USR_MASK) | - (sio.flags & ASYNC_USR_MASK); - - port->baud_base = sio.baud_base; - port->close_delay = sio.close_delay; - port->closing_wait = sio.closing_wait; - port->custom_divisor = sio.custom_divisor; - - gs_set_termios (port->port.tty, NULL); - - return 0; -} - - -/*****************************************************************************/ - -/* - * Generate the serial struct info. - */ - -int gs_getserial(struct gs_port *port, struct serial_struct __user *sp) -{ - struct serial_struct sio; - - memset(&sio, 0, sizeof(struct serial_struct)); - sio.flags = port->port.flags; - sio.baud_base = port->baud_base; - sio.close_delay = port->close_delay; - sio.closing_wait = port->closing_wait; - sio.custom_divisor = port->custom_divisor; - sio.hub6 = 0; - - /* If you want you can override these. */ - sio.type = PORT_UNKNOWN; - sio.xmit_fifo_size = -1; - sio.line = -1; - sio.port = -1; - sio.irq = -1; - - if (port->rd->getserial) - port->rd->getserial (port, &sio); - - if (copy_to_user(sp, &sio, sizeof(struct serial_struct))) - return -EFAULT; - return 0; - -} - - -void gs_got_break(struct gs_port *port) -{ - func_enter (); - - tty_insert_flip_char(port->port.tty, 0, TTY_BREAK); - tty_schedule_flip(port->port.tty); - if (port->port.flags & ASYNC_SAK) { - do_SAK (port->port.tty); - } - - func_exit (); -} - - -EXPORT_SYMBOL(gs_put_char); -EXPORT_SYMBOL(gs_write); -EXPORT_SYMBOL(gs_write_room); -EXPORT_SYMBOL(gs_chars_in_buffer); -EXPORT_SYMBOL(gs_flush_buffer); -EXPORT_SYMBOL(gs_flush_chars); -EXPORT_SYMBOL(gs_stop); -EXPORT_SYMBOL(gs_start); -EXPORT_SYMBOL(gs_hangup); -EXPORT_SYMBOL(gs_block_til_ready); -EXPORT_SYMBOL(gs_close); -EXPORT_SYMBOL(gs_set_termios); -EXPORT_SYMBOL(gs_init_port); -EXPORT_SYMBOL(gs_setserial); -EXPORT_SYMBOL(gs_getserial); -EXPORT_SYMBOL(gs_got_break); - -MODULE_LICENSE("GPL"); diff --git a/drivers/char/rio/Makefile b/drivers/char/rio/Makefile deleted file mode 100644 index 1661875883fb..000000000000 --- a/drivers/char/rio/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux rio-subsystem. -# -# (C) R.E.Wolff@BitWizard.nl -# -# This file is GPL. See other files for the full Blurb. I'm lazy today. -# - -obj-$(CONFIG_RIO) += rio.o - -rio-y := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \ - rioparam.o rioroute.o riotable.o riotty.o diff --git a/drivers/char/rio/board.h b/drivers/char/rio/board.h deleted file mode 100644 index bdea633a9076..000000000000 --- a/drivers/char/rio/board.h +++ /dev/null @@ -1,132 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : board.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:07 -** Retrieved : 11/6/98 11:34:20 -** -** ident @(#)board.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_board_h__ -#define __rio_board_h__ - -/* -** board.h contains the definitions for the *hardware* of the host cards. -** It describes the memory overlay for the dual port RAM area. -*/ - -#define DP_SRAM1_SIZE 0x7C00 -#define DP_SRAM2_SIZE 0x0200 -#define DP_SRAM3_SIZE 0x7000 -#define DP_SCRATCH_SIZE 0x1000 -#define DP_PARMMAP_ADDR 0x01FE /* offset into SRAM2 */ -#define DP_STARTUP_ADDR 0x01F8 /* offset into SRAM2 */ - -/* -** The shape of the Host Control area, at offset 0x7C00, Write Only -*/ -struct s_Ctrl { - u8 DpCtl; /* 7C00 */ - u8 Dp_Unused2_[127]; - u8 DpIntSet; /* 7C80 */ - u8 Dp_Unused3_[127]; - u8 DpTpuReset; /* 7D00 */ - u8 Dp_Unused4_[127]; - u8 DpIntReset; /* 7D80 */ - u8 Dp_Unused5_[127]; -}; - -/* -** The PROM data area on the host (0x7C00), Read Only -*/ -struct s_Prom { - u16 DpSlxCode[2]; - u16 DpRev; - u16 Dp_Unused6_; - u16 DpUniq[4]; - u16 DpJahre; - u16 DpWoche; - u16 DpHwFeature[5]; - u16 DpOemId; - u16 DpSiggy[16]; -}; - -/* -** Union of the Ctrl and Prom areas -*/ -union u_CtrlProm { /* This is the control/PROM area (0x7C00) */ - struct s_Ctrl DpCtrl; - struct s_Prom DpProm; -}; - -/* -** The top end of memory! -*/ -struct s_ParmMapS { /* Area containing Parm Map Pointer */ - u8 Dp_Unused8_[DP_PARMMAP_ADDR]; - u16 DpParmMapAd; -}; - -struct s_StartUpS { - u8 Dp_Unused9_[DP_STARTUP_ADDR]; - u8 Dp_LongJump[0x4]; - u8 Dp_Unused10_[2]; - u8 Dp_ShortJump[0x2]; -}; - -union u_Sram2ParmMap { /* This is the top of memory (0x7E00-0x7FFF) */ - u8 DpSramMem[DP_SRAM2_SIZE]; - struct s_ParmMapS DpParmMapS; - struct s_StartUpS DpStartUpS; -}; - -/* -** This is the DP RAM overlay. -*/ -struct DpRam { - u8 DpSram1[DP_SRAM1_SIZE]; /* 0000 - 7BFF */ - union u_CtrlProm DpCtrlProm; /* 7C00 - 7DFF */ - union u_Sram2ParmMap DpSram2ParmMap; /* 7E00 - 7FFF */ - u8 DpScratch[DP_SCRATCH_SIZE]; /* 8000 - 8FFF */ - u8 DpSram3[DP_SRAM3_SIZE]; /* 9000 - FFFF */ -}; - -#define DpControl DpCtrlProm.DpCtrl.DpCtl -#define DpSetInt DpCtrlProm.DpCtrl.DpIntSet -#define DpResetTpu DpCtrlProm.DpCtrl.DpTpuReset -#define DpResetInt DpCtrlProm.DpCtrl.DpIntReset - -#define DpSlx DpCtrlProm.DpProm.DpSlxCode -#define DpRevision DpCtrlProm.DpProm.DpRev -#define DpUnique DpCtrlProm.DpProm.DpUniq -#define DpYear DpCtrlProm.DpProm.DpJahre -#define DpWeek DpCtrlProm.DpProm.DpWoche -#define DpSignature DpCtrlProm.DpProm.DpSiggy - -#define DpParmMapR DpSram2ParmMap.DpParmMapS.DpParmMapAd -#define DpSram2 DpSram2ParmMap.DpSramMem - -#endif diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h deleted file mode 100644 index 5ab51679caa2..000000000000 --- a/drivers/char/rio/cirrus.h +++ /dev/null @@ -1,210 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* CIRRUS.H ******* - ******* ******* - **************************************************************************** - - Author : Jeremy Rolls - Date : 3 Aug 1990 - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _cirrus_h -#define _cirrus_h 1 - -/* Bit fields for particular registers shared with driver */ - -/* COR1 - driver and RTA */ -#define RIOC_COR1_ODD 0x80 /* Odd parity */ -#define RIOC_COR1_EVEN 0x00 /* Even parity */ -#define RIOC_COR1_NOP 0x00 /* No parity */ -#define RIOC_COR1_FORCE 0x20 /* Force parity */ -#define RIOC_COR1_NORMAL 0x40 /* With parity */ -#define RIOC_COR1_1STOP 0x00 /* 1 stop bit */ -#define RIOC_COR1_15STOP 0x04 /* 1.5 stop bits */ -#define RIOC_COR1_2STOP 0x08 /* 2 stop bits */ -#define RIOC_COR1_5BITS 0x00 /* 5 data bits */ -#define RIOC_COR1_6BITS 0x01 /* 6 data bits */ -#define RIOC_COR1_7BITS 0x02 /* 7 data bits */ -#define RIOC_COR1_8BITS 0x03 /* 8 data bits */ - -#define RIOC_COR1_HOST 0xef /* Safe host bits */ - -/* RTA only */ -#define RIOC_COR1_CINPCK 0x00 /* Check parity of received characters */ -#define RIOC_COR1_CNINPCK 0x10 /* Don't check parity */ - -/* COR2 bits for both RTA and driver use */ -#define RIOC_COR2_IXANY 0x80 /* IXANY - any character is XON */ -#define RIOC_COR2_IXON 0x40 /* IXON - enable tx soft flowcontrol */ -#define RIOC_COR2_RTSFLOW 0x02 /* Enable tx hardware flow control */ - -/* Additional driver bits */ -#define RIOC_COR2_HUPCL 0x20 /* Hang up on close */ -#define RIOC_COR2_CTSFLOW 0x04 /* Enable rx hardware flow control */ -#define RIOC_COR2_IXOFF 0x01 /* Enable rx software flow control */ -#define RIOC_COR2_DTRFLOW 0x08 /* Enable tx hardware flow control */ - -/* RTA use only */ -#define RIOC_COR2_ETC 0x20 /* Embedded transmit options */ -#define RIOC_COR2_LOCAL 0x10 /* Local loopback mode */ -#define RIOC_COR2_REMOTE 0x08 /* Remote loopback mode */ -#define RIOC_COR2_HOST 0xc2 /* Safe host bits */ - -/* COR3 - RTA use only */ -#define RIOC_COR3_SCDRNG 0x80 /* Enable special char detect for range */ -#define RIOC_COR3_SCD34 0x40 /* Special character detect for SCHR's 3 + 4 */ -#define RIOC_COR3_FCT 0x20 /* Flow control transparency */ -#define RIOC_COR3_SCD12 0x10 /* Special character detect for SCHR's 1 + 2 */ -#define RIOC_COR3_FIFO12 0x0c /* 12 chars for receive FIFO threshold */ -#define RIOC_COR3_FIFO10 0x0a /* 10 chars for receive FIFO threshold */ -#define RIOC_COR3_FIFO8 0x08 /* 8 chars for receive FIFO threshold */ -#define RIOC_COR3_FIFO6 0x06 /* 6 chars for receive FIFO threshold */ - -#define RIOC_COR3_THRESHOLD RIOC_COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */ - -#define RIOC_COR3_DEFAULT (RIOC_COR3_FCT | RIOC_COR3_THRESHOLD) - /* Default bits for COR3 */ - -/* COR4 driver and RTA use */ -#define RIOC_COR4_IGNCR 0x80 /* Throw away CR's on input */ -#define RIOC_COR4_ICRNL 0x40 /* Map CR -> NL on input */ -#define RIOC_COR4_INLCR 0x20 /* Map NL -> CR on input */ -#define RIOC_COR4_IGNBRK 0x10 /* Ignore Break */ -#define RIOC_COR4_NBRKINT 0x08 /* No interrupt on break (-BRKINT) */ -#define RIOC_COR4_RAISEMOD 0x01 /* Raise modem output lines on non-zero baud */ - - -/* COR4 driver only */ -#define RIOC_COR4_IGNPAR 0x04 /* IGNPAR (ignore characters with errors) */ -#define RIOC_COR4_PARMRK 0x02 /* PARMRK */ - -#define RIOC_COR4_HOST 0xf8 /* Safe host bits */ - -/* COR4 RTA only */ -#define RIOC_COR4_CIGNPAR 0x02 /* Thrown away bad characters */ -#define RIOC_COR4_CPARMRK 0x04 /* PARMRK characters */ -#define RIOC_COR4_CNPARMRK 0x03 /* Don't PARMRK */ - -/* COR5 driver and RTA use */ -#define RIOC_COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */ -#define RIOC_COR5_LNE 0x40 /* Enable LNEXT processing */ -#define RIOC_COR5_CMOE 0x20 /* Match good and errored characters */ -#define RIOC_COR5_ONLCR 0x02 /* NL -> CR NL on output */ -#define RIOC_COR5_OCRNL 0x01 /* CR -> NL on output */ - -/* -** Spare bits - these are not used in the CIRRUS registers, so we use -** them to set various other features. -*/ -/* -** tstop and tbusy indication -*/ -#define RIOC_COR5_TSTATE_ON 0x08 /* Turn on monitoring of tbusy and tstop */ -#define RIOC_COR5_TSTATE_OFF 0x04 /* Turn off monitoring of tbusy and tstop */ -/* -** TAB3 -*/ -#define RIOC_COR5_TAB3 0x10 /* TAB3 mode */ - -#define RIOC_COR5_HOST 0xc3 /* Safe host bits */ - -/* CCSR */ -#define RIOC_CCSR_TXFLOFF 0x04 /* Tx is xoffed */ - -/* MSVR1 */ -/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the - RTA. This is because otherwise DCD would get lost on the 1 parallel / 3 - serial option. -*/ -#define RIOC_MSVR1_CD 0x80 /* CD (DSR on Cirrus) */ -#define RIOC_MSVR1_RTS 0x40 /* RTS (CTS on Cirrus) */ -#define RIOC_MSVR1_RI 0x20 /* RI */ -#define RIOC_MSVR1_DTR 0x10 /* DTR (CD on Cirrus) */ -#define RIOC_MSVR1_CTS 0x01 /* CTS output pin (RTS on Cirrus) */ -/* Next two used to indicate state of tbusy and tstop to driver */ -#define RIOC_MSVR1_TSTOP 0x08 /* Set if port flow controlled */ -#define RIOC_MSVR1_TEMPTY 0x04 /* Set if port tx buffer empty */ - -#define RIOC_MSVR1_HOST 0xf3 /* The bits the host wants */ - -/* Defines for the subscripts of a CONFIG packet */ -#define RIOC_CONFIG_COR1 1 /* Option register 1 */ -#define RIOC_CONFIG_COR2 2 /* Option register 2 */ -#define RIOC_CONFIG_COR4 3 /* Option register 4 */ -#define RIOC_CONFIG_COR5 4 /* Option register 5 */ -#define RIOC_CONFIG_TXXON 5 /* Tx XON character */ -#define RIOC_CONFIG_TXXOFF 6 /* Tx XOFF character */ -#define RIOC_CONFIG_RXXON 7 /* Rx XON character */ -#define RIOC_CONFIG_RXXOFF 8 /* Rx XOFF character */ -#define RIOC_CONFIG_LNEXT 9 /* LNEXT character */ -#define RIOC_CONFIG_TXBAUD 10 /* Tx baud rate */ -#define RIOC_CONFIG_RXBAUD 11 /* Rx baud rate */ - -#define RIOC_PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */ - -/* Packet types going from Host to remote - with the exception of OPEN, MOPEN, - CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not - be used -*/ -#define RIOC_OPEN 0x00 /* Open a port */ -#define RIOC_CONFIG 0x01 /* Configure a port */ -#define RIOC_MOPEN 0x02 /* Modem open (block for DCD) */ -#define RIOC_CLOSE 0x03 /* Close a port */ -#define RIOC_WFLUSH (0x04 | RIOC_PRE_EMPTIVE) /* Write flush */ -#define RIOC_RFLUSH (0x05 | RIOC_PRE_EMPTIVE) /* Read flush */ -#define RIOC_RESUME (0x06 | RIOC_PRE_EMPTIVE) /* Resume if xoffed */ -#define RIOC_SBREAK 0x07 /* Start break */ -#define RIOC_EBREAK 0x08 /* End break */ -#define RIOC_SUSPEND (0x09 | RIOC_PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */ -#define RIOC_FCLOSE (0x0a | RIOC_PRE_EMPTIVE) /* Force close */ -#define RIOC_XPRINT 0x0b /* Xprint packet */ -#define RIOC_MBIS (0x0c | RIOC_PRE_EMPTIVE) /* Set modem lines */ -#define RIOC_MBIC (0x0d | RIOC_PRE_EMPTIVE) /* Clear modem lines */ -#define RIOC_MSET (0x0e | RIOC_PRE_EMPTIVE) /* Set modem lines */ -#define RIOC_PCLOSE 0x0f /* Pseudo close - Leaves rx/tx enabled */ -#define RIOC_MGET (0x10 | RIOC_PRE_EMPTIVE) /* Force update of modem status */ -#define RIOC_MEMDUMP (0x11 | RIOC_PRE_EMPTIVE) /* Send back mem from addr supplied */ -#define RIOC_READ_REGISTER (0x12 | RIOC_PRE_EMPTIVE) /* Read CD1400 register (debug) */ - -/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS - use data[4] / data[3] to indicate current state and modem status respectively -*/ - -#define RIOC_COMPLETE (0x20 | RIOC_PRE_EMPTIVE) - /* Command complete */ -#define RIOC_BREAK_RECEIVED (0x21 | RIOC_PRE_EMPTIVE) - /* Break received */ -#define RIOC_MODEM_STATUS (0x22 | RIOC_PRE_EMPTIVE) - /* Change in modem status */ - -/* "Command" packet that could go either way - handshake wake-up */ -#define RIOC_HANDSHAKE (0x23 | RIOC_PRE_EMPTIVE) - /* Wake-up to HOST / RTA */ - -#endif diff --git a/drivers/char/rio/cmdblk.h b/drivers/char/rio/cmdblk.h deleted file mode 100644 index 9ed4f861675a..000000000000 --- a/drivers/char/rio/cmdblk.h +++ /dev/null @@ -1,53 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : cmdblk.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:09 -** Retrieved : 11/6/98 11:34:20 -** -** ident @(#)cmdblk.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_cmdblk_h__ -#define __rio_cmdblk_h__ - -/* -** the structure of a command block, used to queue commands destined for -** a rup. -*/ - -struct CmdBlk { - struct CmdBlk *NextP; /* Pointer to next command block */ - struct PKT Packet; /* A packet, to copy to the rup */ - /* The func to call to check if OK */ - int (*PreFuncP) (unsigned long, struct CmdBlk *); - int PreArg; /* The arg for the func */ - /* The func to call when completed */ - int (*PostFuncP) (unsigned long, struct CmdBlk *); - int PostArg; /* The arg for the func */ -}; - -#define NUM_RIO_CMD_BLKS (3 * (MAX_RUP * 4 + LINKS_PER_UNIT * 4)) -#endif diff --git a/drivers/char/rio/cmdpkt.h b/drivers/char/rio/cmdpkt.h deleted file mode 100644 index c1e7a2798070..000000000000 --- a/drivers/char/rio/cmdpkt.h +++ /dev/null @@ -1,177 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : cmdpkt.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:09 -** Retrieved : 11/6/98 11:34:20 -** -** ident @(#)cmdpkt.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ -#ifndef __rio_cmdpkt_h__ -#define __rio_cmdpkt_h__ - -/* -** overlays for the data area of a packet. Used in both directions -** (to build a packet to send, and to interpret a packet that arrives) -** and is very inconvenient for MIPS, so they appear as two separate -** structures - those used for modifying/reading packets on the card -** and those for modifying/reading packets in real memory, which have an _M -** suffix. -*/ - -#define RTA_BOOT_DATA_SIZE (PKT_MAX_DATA_LEN-2) - -/* -** The boot information packet looks like this: -** This structure overlays a PktCmd->CmdData structure, and so starts -** at Data[2] in the actual pkt! -*/ -struct BootSequence { - u16 NumPackets; - u16 LoadBase; - u16 CodeSize; -}; - -#define BOOT_SEQUENCE_LEN 8 - -struct SamTop { - u8 Unit; - u8 Link; -}; - -struct CmdHdr { - u8 PcCommand; - union { - u8 PcPhbNum; - u8 PcLinkNum; - u8 PcIDNum; - } U0; -}; - - -struct PktCmd { - union { - struct { - struct CmdHdr CmdHdr; - struct BootSequence PcBootSequence; - } S1; - struct { - u16 PcSequence; - u8 PcBootData[RTA_BOOT_DATA_SIZE]; - } S2; - struct { - u16 __crud__; - u8 PcUniqNum[4]; /* this is really a uint. */ - u8 PcModuleTypes; /* what modules are fitted */ - } S3; - struct { - struct CmdHdr CmdHdr; - u8 __undefined__; - u8 PcModemStatus; - u8 PcPortStatus; - u8 PcSubCommand; /* commands like mem or register dump */ - u16 PcSubAddr; /* Address for command */ - u8 PcSubData[64]; /* Date area for command */ - } S4; - struct { - struct CmdHdr CmdHdr; - u8 PcCommandText[1]; - u8 __crud__[20]; - u8 PcIDNum2; /* It had to go somewhere! */ - } S5; - struct { - struct CmdHdr CmdHdr; - struct SamTop Topology[LINKS_PER_UNIT]; - } S6; - } U1; -}; - -struct PktCmd_M { - union { - struct { - struct { - u8 PcCommand; - union { - u8 PcPhbNum; - u8 PcLinkNum; - u8 PcIDNum; - } U0; - } CmdHdr; - struct { - u16 NumPackets; - u16 LoadBase; - u16 CodeSize; - } PcBootSequence; - } S1; - struct { - u16 PcSequence; - u8 PcBootData[RTA_BOOT_DATA_SIZE]; - } S2; - struct { - u16 __crud__; - u8 PcUniqNum[4]; /* this is really a uint. */ - u8 PcModuleTypes; /* what modules are fitted */ - } S3; - struct { - u16 __cmd_hdr__; - u8 __undefined__; - u8 PcModemStatus; - u8 PcPortStatus; - u8 PcSubCommand; - u16 PcSubAddr; - u8 PcSubData[64]; - } S4; - struct { - u16 __cmd_hdr__; - u8 PcCommandText[1]; - u8 __crud__[20]; - u8 PcIDNum2; /* Tacked on end */ - } S5; - struct { - u16 __cmd_hdr__; - struct Top Topology[LINKS_PER_UNIT]; - } S6; - } U1; -}; - -#define Command U1.S1.CmdHdr.PcCommand -#define PhbNum U1.S1.CmdHdr.U0.PcPhbNum -#define IDNum U1.S1.CmdHdr.U0.PcIDNum -#define IDNum2 U1.S5.PcIDNum2 -#define LinkNum U1.S1.CmdHdr.U0.PcLinkNum -#define Sequence U1.S2.PcSequence -#define BootData U1.S2.PcBootData -#define BootSequence U1.S1.PcBootSequence -#define UniqNum U1.S3.PcUniqNum -#define ModemStatus U1.S4.PcModemStatus -#define PortStatus U1.S4.PcPortStatus -#define SubCommand U1.S4.PcSubCommand -#define SubAddr U1.S4.PcSubAddr -#define SubData U1.S4.PcSubData -#define CommandText U1.S5.PcCommandText -#define RouteTopology U1.S6.Topology -#define ModuleTypes U1.S3.PcModuleTypes - -#endif diff --git a/drivers/char/rio/daemon.h b/drivers/char/rio/daemon.h deleted file mode 100644 index 4af90323fd00..000000000000 --- a/drivers/char/rio/daemon.h +++ /dev/null @@ -1,307 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : daemon.h -** SID : 1.3 -** Last Modified : 11/6/98 11:34:09 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)daemon.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_daemon_h__ -#define __rio_daemon_h__ - - -/* -** structures used on /dev/rio -*/ - -struct Error { - unsigned int Error; - unsigned int Entry; - unsigned int Other; -}; - -struct DownLoad { - char __user *DataP; - unsigned int Count; - unsigned int ProductCode; -}; - -/* -** A few constants.... -*/ -#ifndef MAX_VERSION_LEN -#define MAX_VERSION_LEN 256 -#endif - -#ifndef MAX_XP_CTRL_LEN -#define MAX_XP_CTRL_LEN 16 /* ALSO IN PORT.H */ -#endif - -struct PortSetup { - unsigned int From; /* Set/Clear XP & IXANY Control from this port.... */ - unsigned int To; /* .... to this port */ - unsigned int XpCps; /* at this speed */ - char XpOn[MAX_XP_CTRL_LEN]; /* this is the start string */ - char XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */ - u8 IxAny; /* enable/disable IXANY */ - u8 IxOn; /* enable/disable IXON */ - u8 Lock; /* lock port params */ - u8 Store; /* store params across closes */ - u8 Drain; /* close only when drained */ -}; - -struct LpbReq { - unsigned int Host; - unsigned int Link; - struct LPB __user *LpbP; -}; - -struct RupReq { - unsigned int HostNum; - unsigned int RupNum; - struct RUP __user *RupP; -}; - -struct PortReq { - unsigned int SysPort; - struct Port __user *PortP; -}; - -struct StreamInfo { - unsigned int SysPort; - int RQueue; - int WQueue; -}; - -struct HostReq { - unsigned int HostNum; - struct Host __user *HostP; -}; - -struct HostDpRam { - unsigned int HostNum; - struct DpRam __user *DpRamP; -}; - -struct DebugCtrl { - unsigned int SysPort; - unsigned int Debug; - unsigned int Wait; -}; - -struct MapInfo { - unsigned int FirstPort; /* 8 ports, starting from this (tty) number */ - unsigned int RtaUnique; /* reside on this RTA (unique number) */ -}; - -struct MapIn { - unsigned int NumEntries; /* How many port sets are we mapping? */ - struct MapInfo *MapInfoP; /* Pointer to (user space) info */ -}; - -struct SendPack { - unsigned int PortNum; - unsigned char Len; - unsigned char Data[PKT_MAX_DATA_LEN]; -}; - -struct SpecialRupCmd { - struct PKT Packet; - unsigned short Host; - unsigned short RupNum; -}; - -struct IdentifyRta { - unsigned long RtaUnique; - u8 ID; -}; - -struct KillNeighbour { - unsigned long UniqueNum; - u8 Link; -}; - -struct rioVersion { - char version[MAX_VERSION_LEN]; - char relid[MAX_VERSION_LEN]; - int buildLevel; - char buildDate[MAX_VERSION_LEN]; -}; - - -/* -** RIOC commands are for the daemon type operations -** -** 09.12.1998 ARG - ESIL 0776 part fix -** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a -** #ifndef here first. -** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now -** allowed to be used by customers. -*/ -#ifndef RIOC -#define RIOC ('R'<<8)|('i'<<16)|('o'<<24) -#endif - -/* -** Boot stuff -*/ -#define RIO_GET_TABLE (RIOC | 100) -#define RIO_PUT_TABLE (RIOC | 101) -#define RIO_ASSIGN_RTA (RIOC | 102) -#define RIO_DELETE_RTA (RIOC | 103) -#define RIO_HOST_FOAD (RIOC | 104) -#define RIO_QUICK_CHECK (RIOC | 105) -#define RIO_SIGNALS_ON (RIOC | 106) -#define RIO_SIGNALS_OFF (RIOC | 107) -#define RIO_CHANGE_NAME (RIOC | 108) -#define RIO_DOWNLOAD (RIOC | 109) -#define RIO_GET_LOG (RIOC | 110) -#define RIO_SETUP_PORTS (RIOC | 111) -#define RIO_ALL_MODEM (RIOC | 112) - -/* -** card state, debug stuff -*/ -#define RIO_NUM_HOSTS (RIOC | 120) -#define RIO_HOST_LPB (RIOC | 121) -#define RIO_HOST_RUP (RIOC | 122) -#define RIO_HOST_PORT (RIOC | 123) -#define RIO_PARMS (RIOC | 124) -#define RIO_HOST_REQ (RIOC | 125) -#define RIO_READ_CONFIG (RIOC | 126) -#define RIO_SET_CONFIG (RIOC | 127) -#define RIO_VERSID (RIOC | 128) -#define RIO_FLAGS (RIOC | 129) -#define RIO_SETDEBUG (RIOC | 130) -#define RIO_GETDEBUG (RIOC | 131) -#define RIO_READ_LEVELS (RIOC | 132) -#define RIO_SET_FAST_BUS (RIOC | 133) -#define RIO_SET_SLOW_BUS (RIOC | 134) -#define RIO_SET_BYTE_MODE (RIOC | 135) -#define RIO_SET_WORD_MODE (RIOC | 136) -#define RIO_STREAM_INFO (RIOC | 137) -#define RIO_START_POLLER (RIOC | 138) -#define RIO_STOP_POLLER (RIOC | 139) -#define RIO_LAST_ERROR (RIOC | 140) -#define RIO_TICK (RIOC | 141) -#define RIO_TOCK (RIOC | 241) /* I did this on purpose, you know. */ -#define RIO_SEND_PACKET (RIOC | 142) -#define RIO_SET_BUSY (RIOC | 143) -#define SPECIAL_RUP_CMD (RIOC | 144) -#define RIO_FOAD_RTA (RIOC | 145) -#define RIO_ZOMBIE_RTA (RIOC | 146) -#define RIO_IDENTIFY_RTA (RIOC | 147) -#define RIO_KILL_NEIGHBOUR (RIOC | 148) -#define RIO_DEBUG_MEM (RIOC | 149) -/* -** 150 - 167 used..... See below -*/ -#define RIO_GET_PORT_SETUP (RIOC | 168) -#define RIO_RESUME (RIOC | 169) -#define RIO_MESG (RIOC | 170) -#define RIO_NO_MESG (RIOC | 171) -#define RIO_WHAT_MESG (RIOC | 172) -#define RIO_HOST_DPRAM (RIOC | 173) -#define RIO_MAP_B50_TO_50 (RIOC | 174) -#define RIO_MAP_B50_TO_57600 (RIOC | 175) -#define RIO_MAP_B110_TO_110 (RIOC | 176) -#define RIO_MAP_B110_TO_115200 (RIOC | 177) -#define RIO_GET_PORT_PARAMS (RIOC | 178) -#define RIO_SET_PORT_PARAMS (RIOC | 179) -#define RIO_GET_PORT_TTY (RIOC | 180) -#define RIO_SET_PORT_TTY (RIOC | 181) -#define RIO_SYSLOG_ONLY (RIOC | 182) -#define RIO_SYSLOG_CONS (RIOC | 183) -#define RIO_CONS_ONLY (RIOC | 184) -#define RIO_BLOCK_OPENS (RIOC | 185) - -/* -** 02.03.1999 ARG - ESIL 0820 fix : -** RIOBootMode is no longer use by the driver, so these ioctls -** are now obsolete : -** -#define RIO_GET_BOOT_MODE (RIOC | 186) -#define RIO_SET_BOOT_MODE (RIOC | 187) -** -*/ - -#define RIO_MEM_DUMP (RIOC | 189) -#define RIO_READ_REGISTER (RIOC | 190) -#define RIO_GET_MODTYPE (RIOC | 191) -#define RIO_SET_TIMER (RIOC | 192) -#define RIO_READ_CHECK (RIOC | 196) -#define RIO_WAITING_FOR_RESTART (RIOC | 197) -#define RIO_BIND_RTA (RIOC | 198) -#define RIO_GET_BINDINGS (RIOC | 199) -#define RIO_PUT_BINDINGS (RIOC | 200) - -#define RIO_MAKE_DEV (RIOC | 201) -#define RIO_MINOR (RIOC | 202) - -#define RIO_IDENTIFY_DRIVER (RIOC | 203) -#define RIO_DISPLAY_HOST_CFG (RIOC | 204) - - -/* -** MAKE_DEV / MINOR stuff -*/ -#define RIO_DEV_DIRECT 0x0000 -#define RIO_DEV_MODEM 0x0200 -#define RIO_DEV_XPRINT 0x0400 -#define RIO_DEV_MASK 0x0600 - -/* -** port management, xprint stuff -*/ -#define rIOCN(N) (RIOC|(N)) -#define rIOCR(N,T) (RIOC|(N)) -#define rIOCW(N,T) (RIOC|(N)) - -#define RIO_GET_XP_ON rIOCR(150,char[16]) /* start xprint string */ -#define RIO_SET_XP_ON rIOCW(151,char[16]) -#define RIO_GET_XP_OFF rIOCR(152,char[16]) /* finish xprint string */ -#define RIO_SET_XP_OFF rIOCW(153,char[16]) -#define RIO_GET_XP_CPS rIOCR(154,int) /* xprint CPS */ -#define RIO_SET_XP_CPS rIOCW(155,int) -#define RIO_GET_IXANY rIOCR(156,int) /* ixany allowed? */ -#define RIO_SET_IXANY rIOCW(157,int) -#define RIO_SET_IXANY_ON rIOCN(158) /* allow ixany */ -#define RIO_SET_IXANY_OFF rIOCN(159) /* disallow ixany */ -#define RIO_GET_MODEM rIOCR(160,int) /* port is modem/direct line? */ -#define RIO_SET_MODEM rIOCW(161,int) -#define RIO_SET_MODEM_ON rIOCN(162) /* port is a modem */ -#define RIO_SET_MODEM_OFF rIOCN(163) /* port is direct */ -#define RIO_GET_IXON rIOCR(164,int) /* ixon allowed? */ -#define RIO_SET_IXON rIOCW(165,int) -#define RIO_SET_IXON_ON rIOCN(166) /* allow ixon */ -#define RIO_SET_IXON_OFF rIOCN(167) /* disallow ixon */ - -#define RIO_GET_SIVIEW ((('s')<<8) | 106) /* backwards compatible with SI */ - -#define RIO_IOCTL_UNKNOWN -2 - -#endif diff --git a/drivers/char/rio/errors.h b/drivers/char/rio/errors.h deleted file mode 100644 index bdb05234090a..000000000000 --- a/drivers/char/rio/errors.h +++ /dev/null @@ -1,98 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : errors.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:10 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)errors.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_errors_h__ -#define __rio_errors_h__ - -/* -** error codes -*/ - -#define NOTHING_WRONG_AT_ALL 0 -#define BAD_CHARACTER_IN_NAME 1 -#define TABLE_ENTRY_ISNT_PROPERLY_NULL 2 -#define UNKNOWN_HOST_NUMBER 3 -#define ZERO_RTA_ID 4 -#define BAD_RTA_ID 5 -#define DUPLICATED_RTA_ID 6 -#define DUPLICATE_UNIQUE_NUMBER 7 -#define BAD_TTY_NUMBER 8 -#define TTY_NUMBER_IN_USE 9 -#define NAME_USED_TWICE 10 -#define HOST_ID_NOT_ZERO 11 -#define BOOT_IN_PROGRESS 12 -#define COPYIN_FAILED 13 -#define HOST_FILE_TOO_LARGE 14 -#define COPYOUT_FAILED 15 -#define NOT_SUPER_USER 16 -#define RIO_ALREADY_POLLING 17 - -#define ID_NUMBER_OUT_OF_RANGE 18 -#define PORT_NUMBER_OUT_OF_RANGE 19 -#define HOST_NUMBER_OUT_OF_RANGE 20 -#define RUP_NUMBER_OUT_OF_RANGE 21 -#define TTY_NUMBER_OUT_OF_RANGE 22 -#define LINK_NUMBER_OUT_OF_RANGE 23 - -#define HOST_NOT_RUNNING 24 -#define IOCTL_COMMAND_UNKNOWN 25 -#define RIO_SYSTEM_HALTED 26 -#define WAIT_FOR_DRAIN_BROKEN 27 -#define PORT_NOT_MAPPED_INTO_SYSTEM 28 -#define EXCLUSIVE_USE_SET 29 -#define WAIT_FOR_NOT_CLOSING_BROKEN 30 -#define WAIT_FOR_PORT_TO_OPEN_BROKEN 31 -#define WAIT_FOR_CARRIER_BROKEN 32 -#define WAIT_FOR_NOT_IN_USE_BROKEN 33 -#define WAIT_FOR_CAN_ADD_COMMAND_BROKEN 34 -#define WAIT_FOR_ADD_COMMAND_BROKEN 35 -#define WAIT_FOR_NOT_PARAM_BROKEN 36 -#define WAIT_FOR_RETRY_BROKEN 37 -#define HOST_HAS_ALREADY_BEEN_BOOTED 38 -#define UNIT_IS_IN_USE 39 -#define COULDNT_FIND_ENTRY 40 -#define RTA_UNIQUE_NUMBER_ZERO 41 -#define CLOSE_COMMAND_FAILED 42 -#define WAIT_FOR_CLOSE_BROKEN 43 -#define CPS_VALUE_OUT_OF_RANGE 44 -#define ID_ALREADY_IN_USE 45 -#define SIGNALS_ALREADY_SET 46 -#define NOT_RECEIVING_PROCESS 47 -#define RTA_NUMBER_WRONG 48 -#define NO_SUCH_PRODUCT 49 -#define HOST_SYSPORT_BAD 50 -#define ID_NOT_TENTATIVE 51 -#define XPRINT_CPS_OUT_OF_RANGE 52 -#define NOT_ENOUGH_CORE_FOR_PCI_COPY 53 - - -#endif /* __rio_errors_h__ */ diff --git a/drivers/char/rio/func.h b/drivers/char/rio/func.h deleted file mode 100644 index 078d44f85e45..000000000000 --- a/drivers/char/rio/func.h +++ /dev/null @@ -1,143 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : func.h -** SID : 1.3 -** Last Modified : 11/6/98 11:34:10 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)func.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __func_h_def -#define __func_h_def - -#include - -/* rioboot.c */ -int RIOBootCodeRTA(struct rio_info *, struct DownLoad *); -int RIOBootCodeHOST(struct rio_info *, struct DownLoad *); -int RIOBootCodeUNKNOWN(struct rio_info *, struct DownLoad *); -void msec_timeout(struct Host *); -int RIOBootRup(struct rio_info *, unsigned int, struct Host *, struct PKT __iomem *); -int RIOBootOk(struct rio_info *, struct Host *, unsigned long); -int RIORtaBound(struct rio_info *, unsigned int); -void rio_fill_host_slot(int, int, unsigned int, struct Host *); - -/* riocmd.c */ -int RIOFoadRta(struct Host *, struct Map *); -int RIOZombieRta(struct Host *, struct Map *); -int RIOCommandRta(struct rio_info *, unsigned long, int (*func) (struct Host *, struct Map *)); -int RIOIdentifyRta(struct rio_info *, void __user *); -int RIOKillNeighbour(struct rio_info *, void __user *); -int RIOSuspendBootRta(struct Host *, int, int); -int RIOFoadWakeup(struct rio_info *); -struct CmdBlk *RIOGetCmdBlk(void); -void RIOFreeCmdBlk(struct CmdBlk *); -int RIOQueueCmdBlk(struct Host *, unsigned int, struct CmdBlk *); -void RIOPollHostCommands(struct rio_info *, struct Host *); -int RIOWFlushMark(unsigned long, struct CmdBlk *); -int RIORFlushEnable(unsigned long, struct CmdBlk *); -int RIOUnUse(unsigned long, struct CmdBlk *); - -/* rioctrl.c */ -int riocontrol(struct rio_info *, dev_t, int, unsigned long, int); - -int RIOPreemptiveCmd(struct rio_info *, struct Port *, unsigned char); - -/* rioinit.c */ -void rioinit(struct rio_info *, struct RioHostInfo *); -void RIOInitHosts(struct rio_info *, struct RioHostInfo *); -void RIOISAinit(struct rio_info *, int); -int RIODoAT(struct rio_info *, int, int); -caddr_t RIOCheckForATCard(int); -int RIOAssignAT(struct rio_info *, int, void __iomem *, int); -int RIOBoardTest(unsigned long, void __iomem *, unsigned char, int); -void RIOAllocDataStructs(struct rio_info *); -void RIOSetupDataStructs(struct rio_info *); -int RIODefaultName(struct rio_info *, struct Host *, unsigned int); -struct rioVersion *RIOVersid(void); -void RIOHostReset(unsigned int, struct DpRam __iomem *, unsigned int); - -/* riointr.c */ -void RIOTxEnable(char *); -void RIOServiceHost(struct rio_info *, struct Host *); -int riotproc(struct rio_info *, struct ttystatics *, int, int); - -/* rioparam.c */ -int RIOParam(struct Port *, int, int, int); -int RIODelay(struct Port *PortP, int); -int RIODelay_ni(struct Port *PortP, int); -void ms_timeout(struct Port *); -int can_add_transmit(struct PKT __iomem **, struct Port *); -void add_transmit(struct Port *); -void put_free_end(struct Host *, struct PKT __iomem *); -int can_remove_receive(struct PKT __iomem **, struct Port *); -void remove_receive(struct Port *); - -/* rioroute.c */ -int RIORouteRup(struct rio_info *, unsigned int, struct Host *, struct PKT __iomem *); -void RIOFixPhbs(struct rio_info *, struct Host *, unsigned int); -unsigned int GetUnitType(unsigned int); -int RIOSetChange(struct rio_info *); -int RIOFindFreeID(struct rio_info *, struct Host *, unsigned int *, unsigned int *); - - -/* riotty.c */ - -int riotopen(struct tty_struct *tty, struct file *filp); -int riotclose(void *ptr); -int riotioctl(struct rio_info *, struct tty_struct *, int, caddr_t); -void ttyseth(struct Port *, struct ttystatics *, struct old_sgttyb *sg); - -/* riotable.c */ -int RIONewTable(struct rio_info *); -int RIOApel(struct rio_info *); -int RIODeleteRta(struct rio_info *, struct Map *); -int RIOAssignRta(struct rio_info *, struct Map *); -int RIOReMapPorts(struct rio_info *, struct Host *, struct Map *); -int RIOChangeName(struct rio_info *, struct Map *); - -#if 0 -/* riodrvr.c */ -struct rio_info *rio_install(struct RioHostInfo *); -int rio_uninstall(struct rio_info *); -int rio_open(struct rio_info *, int, struct file *); -int rio_close(struct rio_info *, struct file *); -int rio_read(struct rio_info *, struct file *, char *, int); -int rio_write(struct rio_info *, struct file *f, char *, int); -int rio_ioctl(struct rio_info *, struct file *, int, char *); -int rio_select(struct rio_info *, struct file *f, int, struct sel *); -int rio_intr(char *); -int rio_isr_thread(char *); -struct rio_info *rio_info_store(int cmd, struct rio_info *p); -#endif - -extern void rio_copy_to_card(void *from, void __iomem *to, int len); -extern int rio_minor(struct tty_struct *tty); -extern int rio_ismodem(struct tty_struct *tty); - -extern void rio_start_card_running(struct Host *HostP); - -#endif /* __func_h_def */ diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h deleted file mode 100644 index 78f24540c224..000000000000 --- a/drivers/char/rio/host.h +++ /dev/null @@ -1,123 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : host.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:10 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)host.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_host_h__ -#define __rio_host_h__ - -/* -** the host structure - one per host card in the system. -*/ - -#define MAX_EXTRA_UNITS 64 - -/* -** Host data structure. This is used for the software equiv. of -** the host. -*/ -struct Host { - struct pci_dev *pdev; - unsigned char Type; /* RIO_EISA, RIO_MCA, ... */ - unsigned char Ivec; /* POLLED or ivec number */ - unsigned char Mode; /* Control stuff */ - unsigned char Slot; /* Slot */ - void __iomem *Caddr; /* KV address of DPRAM */ - struct DpRam __iomem *CardP; /* KV address of DPRAM, with overlay */ - unsigned long PaddrP; /* Phys. address of DPRAM */ - char Name[MAX_NAME_LEN]; /* The name of the host */ - unsigned int UniqueNum; /* host unique number */ - spinlock_t HostLock; /* Lock structure for MPX */ - unsigned int WorkToBeDone; /* set to true each interrupt */ - unsigned int InIntr; /* Being serviced? */ - unsigned int IntSrvDone; /* host's interrupt has been serviced */ - void (*Copy) (void *, void __iomem *, int); /* copy func */ - struct timer_list timer; - /* - ** I M P O R T A N T ! - ** - ** The rest of this data structure is cleared to zero after - ** a RIO_HOST_FOAD command. - */ - - unsigned long Flags; /* Whats going down */ -#define RC_WAITING 0 -#define RC_STARTUP 1 -#define RC_RUNNING 2 -#define RC_STUFFED 3 -#define RC_READY 7 -#define RUN_STATE 7 -/* -** Boot mode applies to the way in which hosts in this system will -** boot RTAs -*/ -#define RC_BOOT_ALL 0x8 /* Boot all RTAs attached */ -#define RC_BOOT_OWN 0x10 /* Only boot RTAs bound to this system */ -#define RC_BOOT_NONE 0x20 /* Don't boot any RTAs (slave mode) */ - - struct Top Topology[LINKS_PER_UNIT]; /* one per link */ - struct Map Mapping[MAX_RUP]; /* Mappings for host */ - struct PHB __iomem *PhbP; /* Pointer to the PHB array */ - unsigned short __iomem *PhbNumP; /* Ptr to Number of PHB's */ - struct LPB __iomem *LinkStrP; /* Link Structure Array */ - struct RUP __iomem *RupP; /* Sixteen real rups here */ - struct PARM_MAP __iomem *ParmMapP; /* points to the parmmap */ - unsigned int ExtraUnits[MAX_EXTRA_UNITS]; /* unknown things */ - unsigned int NumExtraBooted; /* how many of the above */ - /* - ** Twenty logical rups. - ** The first sixteen are the real Rup entries (above), the last four - ** are the link RUPs. - */ - struct UnixRup UnixRups[MAX_RUP + LINKS_PER_UNIT]; - int timeout_id; /* For calling 100 ms delays */ - int timeout_sem; /* For calling 100 ms delays */ - unsigned long locks; /* long req'd for set_bit --RR */ - char ____end_marker____; -}; -#define Control CardP->DpControl -#define SetInt CardP->DpSetInt -#define ResetTpu CardP->DpResetTpu -#define ResetInt CardP->DpResetInt -#define Signature CardP->DpSignature -#define Sram1 CardP->DpSram1 -#define Sram2 CardP->DpSram2 -#define Sram3 CardP->DpSram3 -#define Scratch CardP->DpScratch -#define __ParmMapR CardP->DpParmMapR -#define SLX CardP->DpSlx -#define Revision CardP->DpRevision -#define Unique CardP->DpUnique -#define Year CardP->DpYear -#define Week CardP->DpWeek - -#define RIO_DUMBPARM 0x0860 /* what not to expect */ - -#endif diff --git a/drivers/char/rio/link.h b/drivers/char/rio/link.h deleted file mode 100644 index f3bf11a04d41..000000000000 --- a/drivers/char/rio/link.h +++ /dev/null @@ -1,96 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* L I N K - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _link_h -#define _link_h 1 - -/************************************************* - * Define the Link Status stuff - ************************************************/ -/* Boot request stuff */ -#define BOOT_REQUEST ((ushort) 0) /* Request for a boot */ -#define BOOT_ABORT ((ushort) 1) /* Abort a boot */ -#define BOOT_SEQUENCE ((ushort) 2) /* Packet with the number of packets - and load address */ -#define BOOT_COMPLETED ((ushort) 3) /* Boot completed */ - - -struct LPB { - u16 link_number; /* Link Number */ - u16 in_ch; /* Link In Channel */ - u16 out_ch; /* Link Out Channel */ - u8 attached_serial[4]; /* Attached serial number */ - u8 attached_host_serial[4]; - /* Serial number of Host who - booted the other end */ - u16 descheduled; /* Currently Descheduled */ - u16 state; /* Current state */ - u16 send_poll; /* Send a Poll Packet */ - u16 ltt_p; /* Process Descriptor */ - u16 lrt_p; /* Process Descriptor */ - u16 lrt_status; /* Current lrt status */ - u16 ltt_status; /* Current ltt status */ - u16 timeout; /* Timeout value */ - u16 topology; /* Topology bits */ - u16 mon_ltt; - u16 mon_lrt; - u16 WaitNoBoot; /* Secs to hold off booting */ - u16 add_packet_list; /* Add packets to here */ - u16 remove_packet_list; /* Send packets from here */ - - u16 lrt_fail_chan; /* Lrt's failure channel */ - u16 ltt_fail_chan; /* Ltt's failure channel */ - - /* RUP structure for HOST to driver communications */ - struct RUP rup; - struct RUP link_rup; /* RUP for the link (POLL, - topology etc.) */ - u16 attached_link; /* Number of attached link */ - u16 csum_errors; /* csum errors */ - u16 num_disconnects; /* number of disconnects */ - u16 num_sync_rcvd; /* # sync's received */ - u16 num_sync_rqst; /* # sync requests */ - u16 num_tx; /* Num pkts sent */ - u16 num_rx; /* Num pkts received */ - u16 module_attached; /* Module tpyes of attached */ - u16 led_timeout; /* LED timeout */ - u16 first_port; /* First port to service */ - u16 last_port; /* Last port to service */ -}; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/linux_compat.h b/drivers/char/rio/linux_compat.h deleted file mode 100644 index 34c0d2899ef1..000000000000 --- a/drivers/char/rio/linux_compat.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) 2000 R.E.Wolff@BitWizard.nl - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - - -#define DEBUG_ALL - -struct ttystatics { - struct termios tm; -}; - -extern int rio_debug; - -#define RIO_DEBUG_INIT 0x000001 -#define RIO_DEBUG_BOOT 0x000002 -#define RIO_DEBUG_CMD 0x000004 -#define RIO_DEBUG_CTRL 0x000008 -#define RIO_DEBUG_INTR 0x000010 -#define RIO_DEBUG_PARAM 0x000020 -#define RIO_DEBUG_ROUTE 0x000040 -#define RIO_DEBUG_TABLE 0x000080 -#define RIO_DEBUG_TTY 0x000100 -#define RIO_DEBUG_FLOW 0x000200 -#define RIO_DEBUG_MODEMSIGNALS 0x000400 -#define RIO_DEBUG_PROBE 0x000800 -#define RIO_DEBUG_CLEANUP 0x001000 -#define RIO_DEBUG_IFLOW 0x002000 -#define RIO_DEBUG_PFE 0x004000 -#define RIO_DEBUG_REC 0x008000 -#define RIO_DEBUG_SPINLOCK 0x010000 -#define RIO_DEBUG_DELAY 0x020000 -#define RIO_DEBUG_MOD_COUNT 0x040000 - - -/* Copied over from riowinif.h . This is ugly. The winif file declares -also much other stuff which is incompatible with the headers from -the older driver. The older driver includes "brates.h" which shadows -the definitions from Linux, and is incompatible... */ - -/* RxBaud and TxBaud definitions... */ -#define RIO_B0 0x00 /* RTS / DTR signals dropped */ -#define RIO_B50 0x01 /* 50 baud */ -#define RIO_B75 0x02 /* 75 baud */ -#define RIO_B110 0x03 /* 110 baud */ -#define RIO_B134 0x04 /* 134.5 baud */ -#define RIO_B150 0x05 /* 150 baud */ -#define RIO_B200 0x06 /* 200 baud */ -#define RIO_B300 0x07 /* 300 baud */ -#define RIO_B600 0x08 /* 600 baud */ -#define RIO_B1200 0x09 /* 1200 baud */ -#define RIO_B1800 0x0A /* 1800 baud */ -#define RIO_B2400 0x0B /* 2400 baud */ -#define RIO_B4800 0x0C /* 4800 baud */ -#define RIO_B9600 0x0D /* 9600 baud */ -#define RIO_B19200 0x0E /* 19200 baud */ -#define RIO_B38400 0x0F /* 38400 baud */ -#define RIO_B56000 0x10 /* 56000 baud */ -#define RIO_B57600 0x11 /* 57600 baud */ -#define RIO_B64000 0x12 /* 64000 baud */ -#define RIO_B115200 0x13 /* 115200 baud */ -#define RIO_B2000 0x14 /* 2000 baud */ diff --git a/drivers/char/rio/map.h b/drivers/char/rio/map.h deleted file mode 100644 index 8366978578c1..000000000000 --- a/drivers/char/rio/map.h +++ /dev/null @@ -1,98 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : map.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:11 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)map.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_map_h__ -#define __rio_map_h__ - -/* -** mapping structure passed to and from the config.rio program to -** determine the current topology of the world -*/ - -#define MAX_MAP_ENTRY 17 -#define TOTAL_MAP_ENTRIES (MAX_MAP_ENTRY*RIO_SLOTS) -#define MAX_NAME_LEN 32 - -struct Map { - unsigned int HostUniqueNum; /* Supporting hosts unique number */ - unsigned int RtaUniqueNum; /* Unique number */ - /* - ** The next two IDs must be swapped on big-endian architectures - ** when using a v2.04 /etc/rio/config with a v3.00 driver (when - ** upgrading for example). - */ - unsigned short ID; /* ID used in the subnet */ - unsigned short ID2; /* ID of 2nd block of 8 for 16 port */ - unsigned long Flags; /* Booted, ID Given, Disconnected */ - unsigned long SysPort; /* First tty mapped to this port */ - struct Top Topology[LINKS_PER_UNIT]; /* ID connected to each link */ - char Name[MAX_NAME_LEN]; /* Cute name by which RTA is known */ -}; - -/* -** Flag values: -*/ -#define RTA_BOOTED 0x00000001 -#define RTA_NEWBOOT 0x00000010 -#define MSG_DONE 0x00000020 -#define RTA_INTERCONNECT 0x00000040 -#define RTA16_SECOND_SLOT 0x00000080 -#define BEEN_HERE 0x00000100 -#define SLOT_TENTATIVE 0x40000000 -#define SLOT_IN_USE 0x80000000 - -/* -** HostUniqueNum is the unique number from the host card that this RTA -** is to be connected to. -** RtaUniqueNum is the unique number of the RTA concerned. It will be ZERO -** if the slot in the table is unused. If it is the same as the HostUniqueNum -** then this slot represents a host card. -** Flags contains current boot/route state info -** SysPort is a value in the range 0-504, being the number of the first tty -** on this RTA. Each RTA supports 8 ports. The SysPort value must be modulo 8. -** SysPort 0-127 correspond to /dev/ttyr001 to /dev/ttyr128, with minor -** numbers 0-127. SysPort 128-255 correspond to /dev/ttyr129 to /dev/ttyr256, -** again with minor numbers 0-127, and so on for SysPorts 256-383 and 384-511 -** ID will be in the range 0-16 for a `known' RTA. ID will be 0xFFFF for an -** unused slot/unknown ID etc. -** The Topology array contains the ID of the unit connected to each of the -** four links on this unit. The entry will be 0xFFFF if NOTHING is connected -** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link. -** The Name field is a null-terminated string, upto 31 characters, containing -** the 'cute' name that the sysadmin/users know the RTA by. It is permissible -** for this string to contain any character in the range \040 to \176 inclusive. -** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The -** special character '%' IS allowable, and needs no special action. -** -*/ - -#endif diff --git a/drivers/char/rio/param.h b/drivers/char/rio/param.h deleted file mode 100644 index 7e9b6283e8aa..000000000000 --- a/drivers/char/rio/param.h +++ /dev/null @@ -1,55 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : param.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:12 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)param.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_param_h__ -#define __rio_param_h__ - -/* -** the param command block, as used in OPEN and PARAM calls. -*/ - -struct phb_param { - u8 Cmd; /* It is very important that these line up */ - u8 Cor1; /* with what is expected at the other end. */ - u8 Cor2; /* to confirm that you've got it right, */ - u8 Cor4; /* check with cirrus/cirrus.h */ - u8 Cor5; - u8 TxXon; /* Transmit X-On character */ - u8 TxXoff; /* Transmit X-Off character */ - u8 RxXon; /* Receive X-On character */ - u8 RxXoff; /* Receive X-Off character */ - u8 LNext; /* Literal-next character */ - u8 TxBaud; /* Transmit baudrate */ - u8 RxBaud; /* Receive baudrate */ -}; - -#endif diff --git a/drivers/char/rio/parmmap.h b/drivers/char/rio/parmmap.h deleted file mode 100644 index acc8fa439df5..000000000000 --- a/drivers/char/rio/parmmap.h +++ /dev/null @@ -1,81 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* H O S T M E M O R Y M A P - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- -6/4/1991 jonb Made changes to accommodate Mips R3230 bus - ***************************************************************************/ - -#ifndef _parmap_h -#define _parmap_h - -typedef struct PARM_MAP PARM_MAP; - -struct PARM_MAP { - u16 phb_ptr; /* Pointer to the PHB array */ - u16 phb_num_ptr; /* Ptr to Number of PHB's */ - u16 free_list; /* Free List pointer */ - u16 free_list_end; /* Free List End pointer */ - u16 q_free_list_ptr; /* Ptr to Q_BUF variable */ - u16 unit_id_ptr; /* Unit Id */ - u16 link_str_ptr; /* Link Structure Array */ - u16 bootloader_1; /* 1st Stage Boot Loader */ - u16 bootloader_2; /* 2nd Stage Boot Loader */ - u16 port_route_map_ptr; /* Port Route Map */ - u16 route_ptr; /* Unit Route Map */ - u16 map_present; /* Route Map present */ - s16 pkt_num; /* Total number of packets */ - s16 q_num; /* Total number of Q packets */ - u16 buffers_per_port; /* Number of buffers per port */ - u16 heap_size; /* Initial size of heap */ - u16 heap_left; /* Current Heap left */ - u16 error; /* Error code */ - u16 tx_max; /* Max number of tx pkts per phb */ - u16 rx_max; /* Max number of rx pkts per phb */ - u16 rx_limit; /* For high / low watermarks */ - s16 links; /* Links to use */ - s16 timer; /* Interrupts per second */ - u16 rups; /* Pointer to the RUPs */ - u16 max_phb; /* Mostly for debugging */ - u16 living; /* Just increments!! */ - u16 init_done; /* Initialisation over */ - u16 booting_link; - u16 idle_count; /* Idle time counter */ - u16 busy_count; /* Busy counter */ - u16 idle_control; /* Control Idle Process */ - u16 tx_intr; /* TX interrupt pending */ - u16 rx_intr; /* RX interrupt pending */ - u16 rup_intr; /* RUP interrupt pending */ -}; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/pci.h b/drivers/char/rio/pci.h deleted file mode 100644 index 6032f9135956..000000000000 --- a/drivers/char/rio/pci.h +++ /dev/null @@ -1,72 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : pci.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:12 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)pci.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_pci_h__ -#define __rio_pci_h__ - -/* -** PCI stuff -*/ - -#define PCITpFastClock 0x80 -#define PCITpSlowClock 0x00 -#define PCITpFastLinks 0x40 -#define PCITpSlowLinks 0x00 -#define PCITpIntEnable 0x04 -#define PCITpIntDisable 0x00 -#define PCITpBusEnable 0x02 -#define PCITpBusDisable 0x00 -#define PCITpBootFromRam 0x01 -#define PCITpBootFromLink 0x00 - -#define RIO_PCI_VENDOR 0x11CB -#define RIO_PCI_DEVICE 0x8000 -#define RIO_PCI_BASE_CLASS 0x02 -#define RIO_PCI_SUB_CLASS 0x80 -#define RIO_PCI_PROG_IFACE 0x00 - -#define RIO_PCI_RID 0x0008 -#define RIO_PCI_BADR0 0x0010 -#define RIO_PCI_INTLN 0x003C -#define RIO_PCI_INTPIN 0x003D - -#define RIO_PCI_MEM_SIZE 65536 - -#define RIO_PCI_TURBO_TP 0x80 -#define RIO_PCI_FAST_LINKS 0x40 -#define RIO_PCI_INT_ENABLE 0x04 -#define RIO_PCI_TP_BUS_ENABLE 0x02 -#define RIO_PCI_BOOT_FROM_RAM 0x01 - -#define RIO_PCI_DEFAULT_MODE 0x05 - -#endif /* __rio_pci_h__ */ diff --git a/drivers/char/rio/phb.h b/drivers/char/rio/phb.h deleted file mode 100644 index a4c48ae4e365..000000000000 --- a/drivers/char/rio/phb.h +++ /dev/null @@ -1,142 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* P H B H E A D E R ******* - ******* ******* - **************************************************************************** - - Author : Ian Nandhra, Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _phb_h -#define _phb_h 1 - -/************************************************* - * Handshake asserted. Deasserted by the LTT(s) - ************************************************/ -#define PHB_HANDSHAKE_SET ((ushort) 0x001) /* Set by LRT */ - -#define PHB_HANDSHAKE_RESET ((ushort) 0x002) /* Set by ISR / driver */ - -#define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET | PHB_HANDSHAKE_SET) - /* Reset by ltt */ - - -/************************************************* - * Maximum number of PHB's - ************************************************/ -#define MAX_PHB ((ushort) 128) /* range 0-127 */ - -/************************************************* - * Defines for the mode fields - ************************************************/ -#define TXPKT_INCOMPLETE 0x0001 /* Previous tx packet not completed */ -#define TXINTR_ENABLED 0x0002 /* Tx interrupt is enabled */ -#define TX_TAB3 0x0004 /* TAB3 mode */ -#define TX_OCRNL 0x0008 /* OCRNL mode */ -#define TX_ONLCR 0x0010 /* ONLCR mode */ -#define TX_SENDSPACES 0x0020 /* Send n spaces command needs - completing */ -#define TX_SENDNULL 0x0040 /* Escaping NULL needs completing */ -#define TX_SENDLF 0x0080 /* LF -> CR LF needs completing */ -#define TX_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel - port */ -#define TX_HANGOVER (TX_SENDSPACES | TX_SENDLF | TX_SENDNULL) -#define TX_DTRFLOW 0x0200 /* DTR tx flow control */ -#define TX_DTRFLOWED 0x0400 /* DTR is low - don't allow more data - into the FIFO */ -#define TX_DATAINFIFO 0x0800 /* There is data in the FIFO */ -#define TX_BUSY 0x1000 /* Data in FIFO, shift or holding regs */ - -#define RX_SPARE 0x0001 /* SPARE */ -#define RXINTR_ENABLED 0x0002 /* Rx interrupt enabled */ -#define RX_ICRNL 0x0008 /* ICRNL mode */ -#define RX_INLCR 0x0010 /* INLCR mode */ -#define RX_IGNCR 0x0020 /* IGNCR mode */ -#define RX_CTSFLOW 0x0040 /* CTSFLOW enabled */ -#define RX_IXOFF 0x0080 /* IXOFF enabled */ -#define RX_CTSFLOWED 0x0100 /* CTSFLOW and CTS dropped */ -#define RX_IXOFFED 0x0200 /* IXOFF and xoff sent */ -#define RX_BUFFERED 0x0400 /* Try and pass on complete packets */ - -#define PORT_ISOPEN 0x0001 /* Port open? */ -#define PORT_HUPCL 0x0002 /* Hangup on close? */ -#define PORT_MOPENPEND 0x0004 /* Modem open pending */ -#define PORT_ISPARALLEL 0x0008 /* Parallel port */ -#define PORT_BREAK 0x0010 /* Port on break */ -#define PORT_STATUSPEND 0x0020 /* Status packet pending */ -#define PORT_BREAKPEND 0x0040 /* Break packet pending */ -#define PORT_MODEMPEND 0x0080 /* Modem status packet pending */ -#define PORT_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel - port */ -#define PORT_FULLMODEM 0x0200 /* Full modem signals */ -#define PORT_RJ45 0x0400 /* RJ45 connector - no RI signal */ -#define PORT_RESTRICTED 0x0600 /* Restricted connector - no RI / DTR */ - -#define PORT_MODEMBITS 0x0600 /* Mask for modem fields */ - -#define PORT_WCLOSE 0x0800 /* Waiting for close */ -#define PORT_HANDSHAKEFIX 0x1000 /* Port has H/W flow control fix */ -#define PORT_WASPCLOSED 0x2000 /* Port closed with PCLOSE */ -#define DUMPMODE 0x4000 /* Dump RTA mem */ -#define READ_REG 0x8000 /* Read CD1400 register */ - - - -/************************************************************************** - * PHB Structure - * A few words. - * - * Normally Packets are added to the end of the list and removed from - * the start. The pointer tx_add points to a SPACE to put a Packet. - * The pointer tx_remove points to the next Packet to remove - *************************************************************************/ - -struct PHB { - u8 source; - u8 handshake; - u8 status; - u16 timeout; /* Maximum of 1.9 seconds */ - u8 link; /* Send down this link */ - u8 destination; - u16 tx_start; - u16 tx_end; - u16 tx_add; - u16 tx_remove; - - u16 rx_start; - u16 rx_end; - u16 rx_add; - u16 rx_remove; - -}; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/pkt.h b/drivers/char/rio/pkt.h deleted file mode 100644 index a9458164f02f..000000000000 --- a/drivers/char/rio/pkt.h +++ /dev/null @@ -1,77 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* P A C K E T H E A D E R F I L E - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _pkt_h -#define _pkt_h 1 - -#define PKT_CMD_BIT ((ushort) 0x080) -#define PKT_CMD_DATA ((ushort) 0x080) - -#define PKT_ACK ((ushort) 0x040) - -#define PKT_TGL ((ushort) 0x020) - -#define PKT_LEN_MASK ((ushort) 0x07f) - -#define DATA_WNDW ((ushort) 0x10) -#define PKT_TTL_MASK ((ushort) 0x0f) - -#define PKT_MAX_DATA_LEN 72 - -#define PKT_LENGTH sizeof(struct PKT) -#define SYNC_PKT_LENGTH (PKT_LENGTH + 4) - -#define CONTROL_PKT_LEN_MASK PKT_LEN_MASK -#define CONTROL_PKT_CMD_BIT PKT_CMD_BIT -#define CONTROL_PKT_ACK (PKT_ACK << 8) -#define CONTROL_PKT_TGL (PKT_TGL << 8) -#define CONTROL_PKT_TTL_MASK (PKT_TTL_MASK << 8) -#define CONTROL_DATA_WNDW (DATA_WNDW << 8) - -struct PKT { - u8 dest_unit; /* Destination Unit Id */ - u8 dest_port; /* Destination POrt */ - u8 src_unit; /* Source Unit Id */ - u8 src_port; /* Source POrt */ - u8 len; - u8 control; - u8 data[PKT_MAX_DATA_LEN]; - /* Actual data :-) */ - u16 csum; /* C-SUM */ -}; -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/port.h b/drivers/char/rio/port.h deleted file mode 100644 index 49cf6d15ee54..000000000000 --- a/drivers/char/rio/port.h +++ /dev/null @@ -1,179 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : port.h -** SID : 1.3 -** Last Modified : 11/6/98 11:34:12 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)port.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_port_h__ -#define __rio_port_h__ - -/* -** Port data structure -*/ -struct Port { - struct gs_port gs; - int PortNum; /* RIO port no., 0-511 */ - struct Host *HostP; - void __iomem *Caddr; - unsigned short HostPort; /* Port number on host card */ - unsigned char RupNum; /* Number of RUP for port */ - unsigned char ID2; /* Second ID of RTA for port */ - unsigned long State; /* FLAGS for open & xopen */ -#define RIO_LOPEN 0x00001 /* Local open */ -#define RIO_MOPEN 0x00002 /* Modem open */ -#define RIO_WOPEN 0x00004 /* Waiting for open */ -#define RIO_CLOSING 0x00008 /* The port is being close */ -#define RIO_XPBUSY 0x00010 /* Transparent printer busy */ -#define RIO_BREAKING 0x00020 /* Break in progress */ -#define RIO_DIRECT 0x00040 /* Doing Direct output */ -#define RIO_EXCLUSIVE 0x00080 /* Stream open for exclusive use */ -#define RIO_NDELAY 0x00100 /* Stream is open FNDELAY */ -#define RIO_CARR_ON 0x00200 /* Stream has carrier present */ -#define RIO_XPWANTR 0x00400 /* Stream wanted by Xprint */ -#define RIO_RBLK 0x00800 /* Stream is read-blocked */ -#define RIO_BUSY 0x01000 /* Stream is BUSY for write */ -#define RIO_TIMEOUT 0x02000 /* Stream timeout in progress */ -#define RIO_TXSTOP 0x04000 /* Stream output is stopped */ -#define RIO_WAITFLUSH 0x08000 /* Stream waiting for flush */ -#define RIO_DYNOROD 0x10000 /* Drain failed */ -#define RIO_DELETED 0x20000 /* RTA has been deleted */ -#define RIO_ISSCANCODE 0x40000 /* This line is in scancode mode */ -#define RIO_USING_EUC 0x100000 /* Using extended Unix chars */ -#define RIO_CAN_COOK 0x200000 /* This line can do cooking */ -#define RIO_TRIAD_MODE 0x400000 /* Enable TRIAD special ops. */ -#define RIO_TRIAD_BLOCK 0x800000 /* Next read will block */ -#define RIO_TRIAD_FUNC 0x1000000 /* Seen a function key coming in */ -#define RIO_THROTTLE_RX 0x2000000 /* RX needs to be throttled. */ - - unsigned long Config; /* FLAGS for NOREAD.... */ -#define RIO_NOREAD 0x0001 /* Are not allowed to read port */ -#define RIO_NOWRITE 0x0002 /* Are not allowed to write port */ -#define RIO_NOXPRINT 0x0004 /* Are not allowed to xprint port */ -#define RIO_NOMASK 0x0007 /* All not allowed things */ -#define RIO_IXANY 0x0008 /* Port is allowed ixany */ -#define RIO_MODEM 0x0010 /* Stream is a modem device */ -#define RIO_IXON 0x0020 /* Port is allowed ixon */ -#define RIO_WAITDRAIN 0x0040 /* Wait for port to completely drain */ -#define RIO_MAP_50_TO_50 0x0080 /* Map 50 baud to 50 baud */ -#define RIO_MAP_110_TO_110 0x0100 /* Map 110 baud to 110 baud */ - -/* -** 15.10.1998 ARG - ESIL 0761 prt fix -** As LynxOS does not appear to support Hardware Flow Control ..... -** Define our own flow control flags in 'Config'. -*/ -#define RIO_CTSFLOW 0x0200 /* RIO's own CTSFLOW flag */ -#define RIO_RTSFLOW 0x0400 /* RIO's own RTSFLOW flag */ - - - struct PHB __iomem *PhbP; /* pointer to PHB for port */ - u16 __iomem *TxAdd; /* Add packets here */ - u16 __iomem *TxStart; /* Start of add array */ - u16 __iomem *TxEnd; /* End of add array */ - u16 __iomem *RxRemove; /* Remove packets here */ - u16 __iomem *RxStart; /* Start of remove array */ - u16 __iomem *RxEnd; /* End of remove array */ - unsigned int RtaUniqueNum; /* Unique number of RTA */ - unsigned short PortState; /* status of port */ - unsigned short ModemState; /* status of modem lines */ - unsigned long ModemLines; /* Modem bits sent to RTA */ - unsigned char CookMode; /* who expands CR/LF? */ - unsigned char ParamSem; /* Prevent write during param */ - unsigned char Mapped; /* if port mapped onto host */ - unsigned char SecondBlock; /* if port belongs to 2nd block - of 16 port RTA */ - unsigned char InUse; /* how many pre-emptive cmds */ - unsigned char Lock; /* if params locked */ - unsigned char Store; /* if params stored across closes */ - unsigned char FirstOpen; /* TRUE if first time port opened */ - unsigned char FlushCmdBodge; /* if doing a (non)flush */ - unsigned char MagicFlags; /* require intr processing */ -#define MAGIC_FLUSH 0x01 /* mirror of WflushFlag */ -#define MAGIC_REBOOT 0x02 /* RTA re-booted, re-open ports */ -#define MORE_OUTPUT_EYGOR 0x04 /* riotproc failed to empty clists */ - unsigned char WflushFlag; /* 1 How many WFLUSHs active */ -/* -** Transparent print stuff -*/ - struct Xprint { -#ifndef MAX_XP_CTRL_LEN -#define MAX_XP_CTRL_LEN 16 /* ALSO IN DAEMON.H */ -#endif - unsigned int XpCps; - char XpOn[MAX_XP_CTRL_LEN]; - char XpOff[MAX_XP_CTRL_LEN]; - unsigned short XpLen; /* strlen(XpOn)+strlen(XpOff) */ - unsigned char XpActive; - unsigned char XpLastTickOk; /* TRUE if we can process */ -#define XP_OPEN 00001 -#define XP_RUNABLE 00002 - struct ttystatics *XttyP; - } Xprint; - unsigned char RxDataStart; - unsigned char Cor2Copy; /* copy of COR2 */ - char *Name; /* points to the Rta's name */ - char *TxRingBuffer; - unsigned short TxBufferIn; /* New data arrives here */ - unsigned short TxBufferOut; /* Intr removes data here */ - unsigned short OldTxBufferOut; /* Indicates if draining */ - int TimeoutId; /* Timeout ID */ - unsigned int Debug; - unsigned char WaitUntilBooted; /* True if open should block */ - unsigned int statsGather; /* True if gathering stats */ - unsigned long txchars; /* Chars transmitted */ - unsigned long rxchars; /* Chars received */ - unsigned long opens; /* port open count */ - unsigned long closes; /* port close count */ - unsigned long ioctls; /* ioctl count */ - unsigned char LastRxTgl; /* Last state of rx toggle bit */ - spinlock_t portSem; /* Lock using this sem */ - int MonitorTstate; /* Monitoring ? */ - int timeout_id; /* For calling 100 ms delays */ - int timeout_sem; /* For calling 100 ms delays */ - int firstOpen; /* First time open ? */ - char *p; /* save the global struc here .. */ -}; - -struct ModuleInfo { - char *Name; - unsigned int Flags[4]; /* one per port on a module */ -}; - -/* -** This struct is required because trying to grab an entire Port structure -** runs into problems with differing struct sizes between driver and config. -*/ -struct PortParams { - unsigned int Port; - unsigned long Config; - unsigned long State; - struct ttystatics *TtyP; -}; - -#endif diff --git a/drivers/char/rio/protsts.h b/drivers/char/rio/protsts.h deleted file mode 100644 index 8ab79401d3ee..000000000000 --- a/drivers/char/rio/protsts.h +++ /dev/null @@ -1,110 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* P R O T O C O L S T A T U S S T R U C T U R E ******* - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _protsts_h -#define _protsts_h 1 - -/************************************************* - * ACK bit. Last Packet received OK. Set by - * rxpkt to indicate that the Packet has been - * received OK and that the LTT must set the ACK - * bit in the next outward bound Packet - * and re-set by LTT's after xmit. - * - * Gets shoved into rx_status - ************************************************/ -#define PHB_RX_LAST_PKT_ACKED ((ushort) 0x080) - -/******************************************************* - * The Rx TOGGLE bit. - * Stuffed into rx_status by RXPKT - ******************************************************/ -#define PHB_RX_DATA_WNDW ((ushort) 0x040) - -/******************************************************* - * The Rx TOGGLE bit. Matches the setting in PKT.H - * Stuffed into rx_status - ******************************************************/ -#define PHB_RX_TGL ((ushort) 0x2000) - - -/************************************************* - * This bit is set by the LRT to indicate that - * an ACK (packet) must be returned. - * - * Gets shoved into tx_status - ************************************************/ -#define PHB_TX_SEND_PKT_ACK ((ushort) 0x08) - -/************************************************* - * Set by LTT to indicate that an ACK is required - *************************************************/ -#define PHB_TX_ACK_RQRD ((ushort) 0x01) - - -/******************************************************* - * The Tx TOGGLE bit. - * Stuffed into tx_status by RXPKT from the PKT WndW - * field. Looked by the LTT when the NEXT Packet - * is going to be sent. - ******************************************************/ -#define PHB_TX_DATA_WNDW ((ushort) 0x04) - - -/******************************************************* - * The Tx TOGGLE bit. Matches the setting in PKT.H - * Stuffed into tx_status - ******************************************************/ -#define PHB_TX_TGL ((ushort) 0x02) - -/******************************************************* - * Request intr bit. Set when the queue has gone quiet - * and the PHB has requested an interrupt. - ******************************************************/ -#define PHB_TX_INTR ((ushort) 0x100) - -/******************************************************* - * SET if the PHB cannot send any more data down the - * Link - ******************************************************/ -#define PHB_TX_HANDSHAKE ((ushort) 0x010) - - -#define RUP_SEND_WNDW ((ushort) 0x08) ; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/rio.h b/drivers/char/rio/rio.h deleted file mode 100644 index 1bf36223a4e8..000000000000 --- a/drivers/char/rio/rio.h +++ /dev/null @@ -1,208 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 1998 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rio.h -** SID : 1.3 -** Last Modified : 11/6/98 11:34:13 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)rio.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_rio_h__ -#define __rio_rio_h__ - -/* -** Maximum numbers of things -*/ -#define RIO_SLOTS 4 /* number of configuration slots */ -#define RIO_HOSTS 4 /* number of hosts that can be found */ -#define PORTS_PER_HOST 128 /* number of ports per host */ -#define LINKS_PER_UNIT 4 /* number of links from a host */ -#define RIO_PORTS (PORTS_PER_HOST * RIO_HOSTS) /* max. no. of ports */ -#define RTAS_PER_HOST (MAX_RUP) /* number of RTAs per host */ -#define PORTS_PER_RTA (PORTS_PER_HOST/RTAS_PER_HOST) /* ports on a rta */ -#define PORTS_PER_MODULE 4 /* number of ports on a plug-in module */ - /* number of modules on an RTA */ -#define MODULES_PER_RTA (PORTS_PER_RTA/PORTS_PER_MODULE) -#define MAX_PRODUCT 16 /* numbr of different product codes */ -#define MAX_MODULE_TYPES 16 /* number of different types of module */ - -#define RIO_CONTROL_DEV 128 /* minor number of host/control device */ -#define RIO_INVALID_MAJOR 0 /* test first host card's major no for validity */ - -/* -** number of RTAs that can be bound to a master -*/ -#define MAX_RTA_BINDINGS (MAX_RUP * RIO_HOSTS) - -/* -** Unit types -*/ -#define PC_RTA16 0x90000000 -#define PC_RTA8 0xe0000000 -#define TYPE_HOST 0 -#define TYPE_RTA8 1 -#define TYPE_RTA16 2 - -/* -** Flag values returned by functions -*/ - -#define RIO_FAIL -1 - -/* -** SysPort value for something that hasn't any ports -*/ -#define NO_PORT 0xFFFFFFFF - -/* -** Unit ID Of all hosts -*/ -#define HOST_ID 0 - -/* -** Break bytes into nybles -*/ -#define LONYBLE(X) ((X) & 0xF) -#define HINYBLE(X) (((X)>>4) & 0xF) - -/* -** Flag values passed into some functions -*/ -#define DONT_SLEEP 0 -#define OK_TO_SLEEP 1 - -#define DONT_PRINT 1 -#define DO_PRINT 0 - -#define PRINT_TO_LOG_CONS 0 -#define PRINT_TO_CONS 1 -#define PRINT_TO_LOG 2 - -/* -** Timeout has trouble with times of less than 3 ticks... -*/ -#define MIN_TIMEOUT 3 - -/* -** Generally useful constants -*/ - -#define HUNDRED_MS ((HZ/10)?(HZ/10):1) -#define ONE_MEG 0x100000 -#define SIXTY_FOUR_K 0x10000 - -#define RIO_AT_MEM_SIZE SIXTY_FOUR_K -#define RIO_EISA_MEM_SIZE SIXTY_FOUR_K -#define RIO_MCA_MEM_SIZE SIXTY_FOUR_K - -#define COOK_WELL 0 -#define COOK_MEDIUM 1 -#define COOK_RAW 2 - -/* -** Pointer manipulation stuff -** RIO_PTR takes hostp->Caddr and the offset into the DP RAM area -** and produces a UNIX caddr_t (pointer) to the object -** RIO_OBJ takes hostp->Caddr and a UNIX pointer to an object and -** returns the offset into the DP RAM area. -*/ -#define RIO_PTR(C,O) (((unsigned char __iomem *)(C))+(0xFFFF&(O))) -#define RIO_OFF(C,O) ((unsigned char __iomem *)(O)-(unsigned char __iomem *)(C)) - -/* -** How to convert from various different device number formats: -** DEV is a dev number, as passed to open, close etc - NOT a minor -** number! -**/ - -#define RIO_MODEM_MASK 0x1FF -#define RIO_MODEM_BIT 0x200 -#define RIO_UNMODEM(DEV) (MINOR(DEV) & RIO_MODEM_MASK) -#define RIO_ISMODEM(DEV) (MINOR(DEV) & RIO_MODEM_BIT) -#define RIO_PORT(DEV,FIRST_MAJ) ( (MAJOR(DEV) - FIRST_MAJ) * PORTS_PER_HOST) \ - + MINOR(DEV) -#define CSUM(pkt_ptr) (((u16 *)(pkt_ptr))[0] + ((u16 *)(pkt_ptr))[1] + \ - ((u16 *)(pkt_ptr))[2] + ((u16 *)(pkt_ptr))[3] + \ - ((u16 *)(pkt_ptr))[4] + ((u16 *)(pkt_ptr))[5] + \ - ((u16 *)(pkt_ptr))[6] + ((u16 *)(pkt_ptr))[7] + \ - ((u16 *)(pkt_ptr))[8] + ((u16 *)(pkt_ptr))[9] ) - -#define RIO_LINK_ENABLE 0x80FF /* FF is a hack, mainly for Mips, to */ - /* prevent a really stupid race condition. */ - -#define NOT_INITIALISED 0 -#define INITIALISED 1 - -#define NOT_POLLING 0 -#define POLLING 1 - -#define NOT_CHANGED 0 -#define CHANGED 1 - -#define NOT_INUSE 0 - -#define DISCONNECT 0 -#define CONNECT 1 - -/* ------ Control Codes ------ */ - -#define CONTROL '^' -#define IFOAD ( CONTROL + 1 ) -#define IDENTIFY ( CONTROL + 2 ) -#define ZOMBIE ( CONTROL + 3 ) -#define UFOAD ( CONTROL + 4 ) -#define IWAIT ( CONTROL + 5 ) - -#define IFOAD_MAGIC 0xF0AD /* of course */ -#define ZOMBIE_MAGIC (~0xDEAD) /* not dead -> zombie */ -#define UFOAD_MAGIC 0xD1E /* kill-your-neighbour */ -#define IWAIT_MAGIC 0xB1DE /* Bide your time */ - -/* ------ Error Codes ------ */ - -#define E_NO_ERROR ((ushort) 0) - -/* ------ Free Lists ------ */ - -struct rio_free_list { - u16 next; - u16 prev; -}; - -/* NULL for card side linked lists */ -#define TPNULL ((ushort)(0x8000)) -/* We can add another packet to a transmit queue if the packet pointer pointed - * to by the TxAdd pointer has PKT_IN_USE clear in its address. */ -#define PKT_IN_USE 0x1 - -/* ------ Topology ------ */ - -struct Top { - u8 Unit; - u8 Link; -}; - -#endif /* __rio_h__ */ diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c deleted file mode 100644 index 5e33293d24e3..000000000000 --- a/drivers/char/rio/rio_linux.c +++ /dev/null @@ -1,1204 +0,0 @@ - -/* rio_linux.c -- Linux driver for the Specialix RIO series cards. - * - * - * (C) 1999 R.E.Wolff@BitWizard.nl - * - * Specialix pays for the development and support of this driver. - * Please DO contact support@specialix.co.uk if you require - * support. But please read the documentation (rio.txt) first. - * - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - * */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "linux_compat.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" -#include "protsts.h" -#include "rioboard.h" - - -#include "rio_linux.h" - -/* I don't think that this driver can handle more than 512 ports on -one machine. Specialix specifies max 4 boards in one machine. I don't -know why. If you want to try anyway you'll have to increase the number -of boards in rio.h. You'll have to allocate more majors if you need -more than 512 ports.... */ - -#ifndef RIO_NORMAL_MAJOR0 -/* This allows overriding on the compiler commandline, or in a "major.h" - include or something like that */ -#define RIO_NORMAL_MAJOR0 154 -#define RIO_NORMAL_MAJOR1 156 -#endif - -#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 -#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000 -#endif - -#ifndef RIO_WINDOW_LEN -#define RIO_WINDOW_LEN 0x10000 -#endif - - -/* Configurable options: - (Don't be too sure that it'll work if you toggle them) */ - -/* Am I paranoid or not ? ;-) */ -#undef RIO_PARANOIA_CHECK - - -/* 20 -> 2000 per second. The card should rate-limit interrupts at 1000 - Hz, but it is user configurable. I don't recommend going above 1000 - Hz. The interrupt ratelimit might trigger if the interrupt is - shared with a very active other device. - undef this if you want to disable the check.... -*/ -#define IRQ_RATE_LIMIT 200 - - -/* These constants are derived from SCO Source */ -static DEFINE_MUTEX(rio_fw_mutex); -static struct Conf - RIOConf = { - /* locator */ "RIO Config here", - /* startuptime */ HZ * 2, - /* how long to wait for card to run */ - /* slowcook */ 0, - /* TRUE -> always use line disc. */ - /* intrpolltime */ 1, - /* The frequency of OUR polls */ - /* breakinterval */ 25, - /* x10 mS XXX: units seem to be 1ms not 10! -- REW */ - /* timer */ 10, - /* mS */ - /* RtaLoadBase */ 0x7000, - /* HostLoadBase */ 0x7C00, - /* XpHz */ 5, - /* number of Xprint hits per second */ - /* XpCps */ 120, - /* Xprint characters per second */ - /* XpOn */ "\033d#", - /* start Xprint for a wyse 60 */ - /* XpOff */ "\024", - /* end Xprint for a wyse 60 */ - /* MaxXpCps */ 2000, - /* highest Xprint speed */ - /* MinXpCps */ 10, - /* slowest Xprint speed */ - /* SpinCmds */ 1, - /* non-zero for mega fast boots */ - /* First Addr */ 0x0A0000, - /* First address to look at */ - /* Last Addr */ 0xFF0000, - /* Last address looked at */ - /* BufferSize */ 1024, - /* Bytes per port of buffering */ - /* LowWater */ 256, - /* how much data left before wakeup */ - /* LineLength */ 80, - /* how wide is the console? */ - /* CmdTimeout */ HZ, - /* how long a close command may take */ -}; - - - - -/* Function prototypes */ - -static void rio_disable_tx_interrupts(void *ptr); -static void rio_enable_tx_interrupts(void *ptr); -static void rio_disable_rx_interrupts(void *ptr); -static void rio_enable_rx_interrupts(void *ptr); -static int rio_carrier_raised(struct tty_port *port); -static void rio_shutdown_port(void *ptr); -static int rio_set_real_termios(void *ptr); -static void rio_hungup(void *ptr); -static void rio_close(void *ptr); -static int rio_chars_in_buffer(void *ptr); -static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); -static int rio_init_drivers(void); - -static void my_hd(void *addr, int len); - -static struct tty_driver *rio_driver, *rio_driver2; - -/* The name "p" is a bit non-descript. But that's what the rio-lynxos -sources use all over the place. */ -struct rio_info *p; - -int rio_debug; - - -/* You can have the driver poll your card. - - Set rio_poll to 1 to poll every timer tick (10ms on Intel). - This is used when the card cannot use an interrupt for some reason. -*/ -static int rio_poll = 1; - - -/* These are the only open spaces in my computer. Yours may have more - or less.... */ -static int rio_probe_addrs[] = { 0xc0000, 0xd0000, 0xe0000 }; - -#define NR_RIO_ADDRS ARRAY_SIZE(rio_probe_addrs) - - -/* Set the mask to all-ones. This alas, only supports 32 interrupts. - Some architectures may need more. -- Changed to LONG to - support up to 64 bits on 64bit architectures. -- REW 20/06/99 */ -static long rio_irqmask = -1; - -MODULE_AUTHOR("Rogier Wolff , Patrick van de Lageweg "); -MODULE_DESCRIPTION("RIO driver"); -MODULE_LICENSE("GPL"); -module_param(rio_poll, int, 0); -module_param(rio_debug, int, 0644); -module_param(rio_irqmask, long, 0); - -static struct real_driver rio_real_driver = { - rio_disable_tx_interrupts, - rio_enable_tx_interrupts, - rio_disable_rx_interrupts, - rio_enable_rx_interrupts, - rio_shutdown_port, - rio_set_real_termios, - rio_chars_in_buffer, - rio_close, - rio_hungup, - NULL -}; - -/* - * Firmware loader driver specific routines - * - */ - -static const struct file_operations rio_fw_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = rio_fw_ioctl, - .llseek = noop_llseek, -}; - -static struct miscdevice rio_fw_device = { - RIOCTL_MISC_MINOR, "rioctl", &rio_fw_fops -}; - - - - - -#ifdef RIO_PARANOIA_CHECK - -/* This doesn't work. Who's paranoid around here? Not me! */ - -static inline int rio_paranoia_check(struct rio_port const *port, char *name, const char *routine) -{ - - static const char *badmagic = KERN_ERR "rio: Warning: bad rio port magic number for device %s in %s\n"; - static const char *badinfo = KERN_ERR "rio: Warning: null rio port for device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != RIO_MAGIC) { - printk(badmagic, name, routine); - return 1; - } - - return 0; -} -#else -#define rio_paranoia_check(a,b,c) 0 -#endif - - -#ifdef DEBUG -static void my_hd(void *ad, int len) -{ - int i, j, ch; - unsigned char *addr = ad; - - for (i = 0; i < len; i += 16) { - rio_dprintk(RIO_DEBUG_PARAM, "%08lx ", (unsigned long) addr + i); - for (j = 0; j < 16; j++) { - rio_dprintk(RIO_DEBUG_PARAM, "%02x %s", addr[j + i], (j == 7) ? " " : ""); - } - for (j = 0; j < 16; j++) { - ch = addr[j + i]; - rio_dprintk(RIO_DEBUG_PARAM, "%c", (ch < 0x20) ? '.' : ((ch > 0x7f) ? '.' : ch)); - } - rio_dprintk(RIO_DEBUG_PARAM, "\n"); - } -} -#else -#define my_hd(ad,len) do{/* nothing*/ } while (0) -#endif - - -/* Delay a number of jiffies, allowing a signal to interrupt */ -int RIODelay(struct Port *PortP, int njiffies) -{ - func_enter(); - - rio_dprintk(RIO_DEBUG_DELAY, "delaying %d jiffies\n", njiffies); - msleep_interruptible(jiffies_to_msecs(njiffies)); - func_exit(); - - if (signal_pending(current)) - return RIO_FAIL; - else - return !RIO_FAIL; -} - - -/* Delay a number of jiffies, disallowing a signal to interrupt */ -int RIODelay_ni(struct Port *PortP, int njiffies) -{ - func_enter(); - - rio_dprintk(RIO_DEBUG_DELAY, "delaying %d jiffies (ni)\n", njiffies); - msleep(jiffies_to_msecs(njiffies)); - func_exit(); - return !RIO_FAIL; -} - -void rio_copy_to_card(void *from, void __iomem *to, int len) -{ - rio_copy_toio(to, from, len); -} - -int rio_minor(struct tty_struct *tty) -{ - return tty->index + ((tty->driver == rio_driver) ? 0 : 256); -} - -static int rio_set_real_termios(void *ptr) -{ - return RIOParam((struct Port *) ptr, RIOC_CONFIG, 1, 1); -} - - -static void rio_reset_interrupt(struct Host *HostP) -{ - func_enter(); - - switch (HostP->Type) { - case RIO_AT: - case RIO_MCA: - case RIO_PCI: - writeb(0xFF, &HostP->ResetInt); - } - - func_exit(); -} - - -static irqreturn_t rio_interrupt(int irq, void *ptr) -{ - struct Host *HostP; - func_enter(); - - HostP = ptr; /* &p->RIOHosts[(long)ptr]; */ - rio_dprintk(RIO_DEBUG_IFLOW, "rio: enter rio_interrupt (%d/%d)\n", irq, HostP->Ivec); - - /* AAargh! The order in which to do these things is essential and - not trivial. - - - hardware twiddling goes before "recursive". Otherwise when we - poll the card, and a recursive interrupt happens, we won't - ack the card, so it might keep on interrupting us. (especially - level sensitive interrupt systems like PCI). - - - Rate limit goes before hardware twiddling. Otherwise we won't - catch a card that has gone bonkers. - - - The "initialized" test goes after the hardware twiddling. Otherwise - the card will stick us in the interrupt routine again. - - - The initialized test goes before recursive. - */ - - rio_dprintk(RIO_DEBUG_IFLOW, "rio: We've have noticed the interrupt\n"); - if (HostP->Ivec == irq) { - /* Tell the card we've noticed the interrupt. */ - rio_reset_interrupt(HostP); - } - - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) - return IRQ_HANDLED; - - if (test_and_set_bit(RIO_BOARD_INTR_LOCK, &HostP->locks)) { - printk(KERN_ERR "Recursive interrupt! (host %p/irq%d)\n", ptr, HostP->Ivec); - return IRQ_HANDLED; - } - - RIOServiceHost(p, HostP); - - rio_dprintk(RIO_DEBUG_IFLOW, "riointr() doing host %p type %d\n", ptr, HostP->Type); - - clear_bit(RIO_BOARD_INTR_LOCK, &HostP->locks); - rio_dprintk(RIO_DEBUG_IFLOW, "rio: exit rio_interrupt (%d/%d)\n", irq, HostP->Ivec); - func_exit(); - return IRQ_HANDLED; -} - - -static void rio_pollfunc(unsigned long data) -{ - func_enter(); - - rio_interrupt(0, &p->RIOHosts[data]); - mod_timer(&p->RIOHosts[data].timer, jiffies + rio_poll); - - func_exit(); -} - - -/* ********************************************************************** * - * Here are the routines that actually * - * interface with the generic_serial driver * - * ********************************************************************** */ - -/* Ehhm. I don't know how to fiddle with interrupts on the Specialix - cards. .... Hmm. Ok I figured it out. You don't. -- REW */ - -static void rio_disable_tx_interrupts(void *ptr) -{ - func_enter(); - - /* port->gs.port.flags &= ~GS_TX_INTEN; */ - - func_exit(); -} - - -static void rio_enable_tx_interrupts(void *ptr) -{ - struct Port *PortP = ptr; - /* int hn; */ - - func_enter(); - - /* hn = PortP->HostP - p->RIOHosts; - - rio_dprintk (RIO_DEBUG_TTY, "Pushing host %d\n", hn); - rio_interrupt (-1,(void *) hn, NULL); */ - - RIOTxEnable((char *) PortP); - - /* - * In general we cannot count on "tx empty" interrupts, although - * the interrupt routine seems to be able to tell the difference. - */ - PortP->gs.port.flags &= ~GS_TX_INTEN; - - func_exit(); -} - - -static void rio_disable_rx_interrupts(void *ptr) -{ - func_enter(); - func_exit(); -} - -static void rio_enable_rx_interrupts(void *ptr) -{ - /* struct rio_port *port = ptr; */ - func_enter(); - func_exit(); -} - - -/* Jeez. Isn't this simple? */ -static int rio_carrier_raised(struct tty_port *port) -{ - struct Port *PortP = container_of(port, struct Port, gs.port); - int rv; - - func_enter(); - rv = (PortP->ModemState & RIOC_MSVR1_CD) != 0; - - rio_dprintk(RIO_DEBUG_INIT, "Getting CD status: %d\n", rv); - - func_exit(); - return rv; -} - - -/* Jeez. Isn't this simple? Actually, we can sync with the actual port - by just pushing stuff into the queue going to the port... */ -static int rio_chars_in_buffer(void *ptr) -{ - func_enter(); - - func_exit(); - return 0; -} - - -/* Nothing special here... */ -static void rio_shutdown_port(void *ptr) -{ - struct Port *PortP; - - func_enter(); - - PortP = (struct Port *) ptr; - PortP->gs.port.tty = NULL; - func_exit(); -} - - -/* I haven't the foggiest why the decrement use count has to happen - here. The whole linux serial drivers stuff needs to be redesigned. - My guess is that this is a hack to minimize the impact of a bug - elsewhere. Thinking about it some more. (try it sometime) Try - running minicom on a serial port that is driven by a modularized - driver. Have the modem hangup. Then remove the driver module. Then - exit minicom. I expect an "oops". -- REW */ -static void rio_hungup(void *ptr) -{ - struct Port *PortP; - - func_enter(); - - PortP = (struct Port *) ptr; - PortP->gs.port.tty = NULL; - - func_exit(); -} - - -/* The standard serial_close would become shorter if you'd wrap it like - this. - rs_close (...){save_flags;cli;real_close();dec_use_count;restore_flags;} - */ -static void rio_close(void *ptr) -{ - struct Port *PortP; - - func_enter(); - - PortP = (struct Port *) ptr; - - riotclose(ptr); - - if (PortP->gs.port.count) { - printk(KERN_ERR "WARNING port count:%d\n", PortP->gs.port.count); - PortP->gs.port.count = 0; - } - - PortP->gs.port.tty = NULL; - func_exit(); -} - - - -static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - int rc = 0; - func_enter(); - - /* The "dev" argument isn't used. */ - mutex_lock(&rio_fw_mutex); - rc = riocontrol(p, 0, cmd, arg, capable(CAP_SYS_ADMIN)); - mutex_unlock(&rio_fw_mutex); - - func_exit(); - return rc; -} - -extern int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg); - -static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int rc; - struct Port *PortP; - int ival; - - func_enter(); - - PortP = (struct Port *) tty->driver_data; - - rc = 0; - switch (cmd) { - case TIOCSSOFTCAR: - if ((rc = get_user(ival, (unsigned __user *) argp)) == 0) { - tty->termios->c_cflag = (tty->termios->c_cflag & ~CLOCAL) | (ival ? CLOCAL : 0); - } - break; - case TIOCGSERIAL: - rc = -EFAULT; - if (access_ok(VERIFY_WRITE, argp, sizeof(struct serial_struct))) - rc = gs_getserial(&PortP->gs, argp); - break; - case TCSBRK: - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n"); - rc = -EIO; - } else { - if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2, 250) == - RIO_FAIL) { - rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n"); - rc = -EIO; - } - } - break; - case TCSBRKP: - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n"); - rc = -EIO; - } else { - int l; - l = arg ? arg * 100 : 250; - if (l > 255) - l = 255; - if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2, - arg ? arg * 100 : 250) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n"); - rc = -EIO; - } - } - break; - case TIOCSSERIAL: - rc = -EFAULT; - if (access_ok(VERIFY_READ, argp, sizeof(struct serial_struct))) - rc = gs_setserial(&PortP->gs, argp); - break; - default: - rc = -ENOIOCTLCMD; - break; - } - func_exit(); - return rc; -} - - -/* The throttle/unthrottle scheme for the Specialix card is different - * from other drivers and deserves some explanation. - * The Specialix hardware takes care of XON/XOFF - * and CTS/RTS flow control itself. This means that all we have to - * do when signalled by the upper tty layer to throttle/unthrottle is - * to make a note of it here. When we come to read characters from the - * rx buffers on the card (rio_receive_chars()) we look to see if the - * upper layer can accept more (as noted here in rio_rx_throt[]). - * If it can't we simply don't remove chars from the cards buffer. - * When the tty layer can accept chars, we again note that here and when - * rio_receive_chars() is called it will remove them from the cards buffer. - * The card will notice that a ports buffer has drained below some low - * water mark and will unflow control the line itself, using whatever - * flow control scheme is in use for that port. -- Simon Allen - */ - -static void rio_throttle(struct tty_struct *tty) -{ - struct Port *port = (struct Port *) tty->driver_data; - - func_enter(); - /* If the port is using any type of input flow - * control then throttle the port. - */ - - if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) { - port->State |= RIO_THROTTLE_RX; - } - - func_exit(); -} - - -static void rio_unthrottle(struct tty_struct *tty) -{ - struct Port *port = (struct Port *) tty->driver_data; - - func_enter(); - /* Always unthrottle even if flow control is not enabled on - * this port in case we disabled flow control while the port - * was throttled - */ - - port->State &= ~RIO_THROTTLE_RX; - - func_exit(); - return; -} - - - - - -/* ********************************************************************** * - * Here are the initialization routines. * - * ********************************************************************** */ - - -static struct vpd_prom *get_VPD_PROM(struct Host *hp) -{ - static struct vpd_prom vpdp; - char *p; - int i; - - func_enter(); - rio_dprintk(RIO_DEBUG_PROBE, "Going to verify vpd prom at %p.\n", hp->Caddr + RIO_VPD_ROM); - - p = (char *) &vpdp; - for (i = 0; i < sizeof(struct vpd_prom); i++) - *p++ = readb(hp->Caddr + RIO_VPD_ROM + i * 2); - /* read_rio_byte (hp, RIO_VPD_ROM + i*2); */ - - /* Terminate the identifier string. - *** requires one extra byte in struct vpd_prom *** */ - *p++ = 0; - - if (rio_debug & RIO_DEBUG_PROBE) - my_hd((char *) &vpdp, 0x20); - - func_exit(); - - return &vpdp; -} - -static const struct tty_operations rio_ops = { - .open = riotopen, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = rio_ioctl, - .throttle = rio_throttle, - .unthrottle = rio_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, -}; - -static int rio_init_drivers(void) -{ - int error = -ENOMEM; - - rio_driver = alloc_tty_driver(256); - if (!rio_driver) - goto out; - rio_driver2 = alloc_tty_driver(256); - if (!rio_driver2) - goto out1; - - func_enter(); - - rio_driver->owner = THIS_MODULE; - rio_driver->driver_name = "specialix_rio"; - rio_driver->name = "ttySR"; - rio_driver->major = RIO_NORMAL_MAJOR0; - rio_driver->type = TTY_DRIVER_TYPE_SERIAL; - rio_driver->subtype = SERIAL_TYPE_NORMAL; - rio_driver->init_termios = tty_std_termios; - rio_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - rio_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(rio_driver, &rio_ops); - - rio_driver2->owner = THIS_MODULE; - rio_driver2->driver_name = "specialix_rio"; - rio_driver2->name = "ttySR"; - rio_driver2->major = RIO_NORMAL_MAJOR1; - rio_driver2->type = TTY_DRIVER_TYPE_SERIAL; - rio_driver2->subtype = SERIAL_TYPE_NORMAL; - rio_driver2->init_termios = tty_std_termios; - rio_driver2->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - rio_driver2->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(rio_driver2, &rio_ops); - - rio_dprintk(RIO_DEBUG_INIT, "set_termios = %p\n", gs_set_termios); - - if ((error = tty_register_driver(rio_driver))) - goto out2; - if ((error = tty_register_driver(rio_driver2))) - goto out3; - func_exit(); - return 0; - out3: - tty_unregister_driver(rio_driver); - out2: - put_tty_driver(rio_driver2); - out1: - put_tty_driver(rio_driver); - out: - printk(KERN_ERR "rio: Couldn't register a rio driver, error = %d\n", error); - return 1; -} - -static const struct tty_port_operations rio_port_ops = { - .carrier_raised = rio_carrier_raised, -}; - -static int rio_init_datastructures(void) -{ - int i; - struct Port *port; - func_enter(); - - /* Many drivers statically allocate the maximum number of ports - There is no reason not to allocate them dynamically. Is there? -- REW */ - /* However, the RIO driver allows users to configure their first - RTA as the ports numbered 504-511. We therefore need to allocate - the whole range. :-( -- REW */ - -#define RI_SZ sizeof(struct rio_info) -#define HOST_SZ sizeof(struct Host) -#define PORT_SZ sizeof(struct Port *) -#define TMIO_SZ sizeof(struct termios *) - rio_dprintk(RIO_DEBUG_INIT, "getting : %Zd %Zd %Zd %Zd %Zd bytes\n", RI_SZ, RIO_HOSTS * HOST_SZ, RIO_PORTS * PORT_SZ, RIO_PORTS * TMIO_SZ, RIO_PORTS * TMIO_SZ); - - if (!(p = kzalloc(RI_SZ, GFP_KERNEL))) - goto free0; - if (!(p->RIOHosts = kzalloc(RIO_HOSTS * HOST_SZ, GFP_KERNEL))) - goto free1; - if (!(p->RIOPortp = kzalloc(RIO_PORTS * PORT_SZ, GFP_KERNEL))) - goto free2; - p->RIOConf = RIOConf; - rio_dprintk(RIO_DEBUG_INIT, "Got : %p %p %p\n", p, p->RIOHosts, p->RIOPortp); - -#if 1 - for (i = 0; i < RIO_PORTS; i++) { - port = p->RIOPortp[i] = kzalloc(sizeof(struct Port), GFP_KERNEL); - if (!port) { - goto free6; - } - rio_dprintk(RIO_DEBUG_INIT, "initing port %d (%d)\n", i, port->Mapped); - tty_port_init(&port->gs.port); - port->gs.port.ops = &rio_port_ops; - port->PortNum = i; - port->gs.magic = RIO_MAGIC; - port->gs.close_delay = HZ / 2; - port->gs.closing_wait = 30 * HZ; - port->gs.rd = &rio_real_driver; - spin_lock_init(&port->portSem); - } -#else - /* We could postpone initializing them to when they are configured. */ -#endif - - - - if (rio_debug & RIO_DEBUG_INIT) { - my_hd(&rio_real_driver, sizeof(rio_real_driver)); - } - - - func_exit(); - return 0; - - free6:for (i--; i >= 0; i--) - kfree(p->RIOPortp[i]); -/*free5: - free4: - free3:*/ kfree(p->RIOPortp); - free2:kfree(p->RIOHosts); - free1: - rio_dprintk(RIO_DEBUG_INIT, "Not enough memory! %p %p %p\n", p, p->RIOHosts, p->RIOPortp); - kfree(p); - free0: - return -ENOMEM; -} - -static void __exit rio_release_drivers(void) -{ - func_enter(); - tty_unregister_driver(rio_driver2); - tty_unregister_driver(rio_driver); - put_tty_driver(rio_driver2); - put_tty_driver(rio_driver); - func_exit(); -} - - -#ifdef CONFIG_PCI - /* This was written for SX, but applies to RIO too... - (including bugs....) - - There is another bit besides Bit 17. Turning that bit off - (on boards shipped with the fix in the eeprom) results in a - hang on the next access to the card. - */ - - /******************************************************** - * Setting bit 17 in the CNTRL register of the PLX 9050 * - * chip forces a retry on writes while a read is pending.* - * This is to prevent the card locking up on Intel Xeon * - * multiprocessor systems with the NX chipset. -- NV * - ********************************************************/ - -/* Newer cards are produced with this bit set from the configuration - EEprom. As the bit is read/write for the CPU, we can fix it here, - if we detect that it isn't set correctly. -- REW */ - -static void fix_rio_pci(struct pci_dev *pdev) -{ - unsigned long hwbase; - unsigned char __iomem *rebase; - unsigned int t; - -#define CNTRL_REG_OFFSET 0x50 -#define CNTRL_REG_GOODVALUE 0x18260000 - - hwbase = pci_resource_start(pdev, 0); - rebase = ioremap(hwbase, 0x80); - t = readl(rebase + CNTRL_REG_OFFSET); - if (t != CNTRL_REG_GOODVALUE) { - printk(KERN_DEBUG "rio: performing cntrl reg fix: %08x -> %08x\n", t, CNTRL_REG_GOODVALUE); - writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET); - } - iounmap(rebase); -} -#endif - - -static int __init rio_init(void) -{ - int found = 0; - int i; - struct Host *hp; - int retval; - struct vpd_prom *vpdp; - int okboard; - -#ifdef CONFIG_PCI - struct pci_dev *pdev = NULL; - unsigned short tshort; -#endif - - func_enter(); - rio_dprintk(RIO_DEBUG_INIT, "Initing rio module... (rio_debug=%d)\n", rio_debug); - - if (abs((long) (&rio_debug) - rio_debug) < 0x10000) { - printk(KERN_WARNING "rio: rio_debug is an address, instead of a value. " "Assuming -1. Was %x/%p.\n", rio_debug, &rio_debug); - rio_debug = -1; - } - - if (misc_register(&rio_fw_device) < 0) { - printk(KERN_ERR "RIO: Unable to register firmware loader driver.\n"); - return -EIO; - } - - retval = rio_init_datastructures(); - if (retval < 0) { - misc_deregister(&rio_fw_device); - return retval; - } -#ifdef CONFIG_PCI - /* First look for the JET devices: */ - while ((pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, pdev))) { - u32 tint; - - if (pci_enable_device(pdev)) - continue; - - /* Specialix has a whole bunch of cards with - 0x2000 as the device ID. They say its because - the standard requires it. Stupid standard. */ - /* It seems that reading a word doesn't work reliably on 2.0. - Also, reading a non-aligned dword doesn't work. So we read the - whole dword at 0x2c and extract the word at 0x2e (SUBSYSTEM_ID) - ourselves */ - pci_read_config_dword(pdev, 0x2c, &tint); - tshort = (tint >> 16) & 0xffff; - rio_dprintk(RIO_DEBUG_PROBE, "Got a specialix card: %x.\n", tint); - if (tshort != 0x0100) { - rio_dprintk(RIO_DEBUG_PROBE, "But it's not a RIO card (%d)...\n", tshort); - continue; - } - rio_dprintk(RIO_DEBUG_PROBE, "cp1\n"); - - hp = &p->RIOHosts[p->RIONumHosts]; - hp->PaddrP = pci_resource_start(pdev, 2); - hp->Ivec = pdev->irq; - if (((1 << hp->Ivec) & rio_irqmask) == 0) - hp->Ivec = 0; - hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); - hp->CardP = (struct DpRam __iomem *) hp->Caddr; - hp->Type = RIO_PCI; - hp->Copy = rio_copy_to_card; - hp->Mode = RIO_PCI_BOOT_FROM_RAM; - spin_lock_init(&hp->HostLock); - rio_reset_interrupt(hp); - rio_start_card_running(hp); - - rio_dprintk(RIO_DEBUG_PROBE, "Going to test it (%p/%p).\n", (void *) p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr); - if (RIOBoardTest(p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr, RIO_PCI, 0) == 0) { - rio_dprintk(RIO_DEBUG_INIT, "Done RIOBoardTest\n"); - writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); - p->RIOHosts[p->RIONumHosts].UniqueNum = - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0]) & 0xFF) << 0) | - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24); - rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); - - fix_rio_pci(pdev); - - p->RIOHosts[p->RIONumHosts].pdev = pdev; - pci_dev_get(pdev); - - p->RIOLastPCISearch = 0; - p->RIONumHosts++; - found++; - } else { - iounmap(p->RIOHosts[p->RIONumHosts].Caddr); - p->RIOHosts[p->RIONumHosts].Caddr = NULL; - } - } - - /* Then look for the older PCI card.... : */ - - /* These older PCI cards have problems (only byte-mode access is - supported), which makes them a bit awkward to support. - They also have problems sharing interrupts. Be careful. - (The driver now refuses to share interrupts for these - cards. This should be sufficient). - */ - - /* Then look for the older RIO/PCI devices: */ - while ((pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_RIO, pdev))) { - if (pci_enable_device(pdev)) - continue; - -#ifdef CONFIG_RIO_OLDPCI - hp = &p->RIOHosts[p->RIONumHosts]; - hp->PaddrP = pci_resource_start(pdev, 0); - hp->Ivec = pdev->irq; - if (((1 << hp->Ivec) & rio_irqmask) == 0) - hp->Ivec = 0; - hp->Ivec |= 0x8000; /* Mark as non-sharable */ - hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); - hp->CardP = (struct DpRam __iomem *) hp->Caddr; - hp->Type = RIO_PCI; - hp->Copy = rio_copy_to_card; - hp->Mode = RIO_PCI_BOOT_FROM_RAM; - spin_lock_init(&hp->HostLock); - - rio_dprintk(RIO_DEBUG_PROBE, "Ivec: %x\n", hp->Ivec); - rio_dprintk(RIO_DEBUG_PROBE, "Mode: %x\n", hp->Mode); - - rio_reset_interrupt(hp); - rio_start_card_running(hp); - rio_dprintk(RIO_DEBUG_PROBE, "Going to test it (%p/%p).\n", (void *) p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr); - if (RIOBoardTest(p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr, RIO_PCI, 0) == 0) { - writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); - p->RIOHosts[p->RIONumHosts].UniqueNum = - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0]) & 0xFF) << 0) | - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24); - rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); - - p->RIOHosts[p->RIONumHosts].pdev = pdev; - pci_dev_get(pdev); - - p->RIOLastPCISearch = 0; - p->RIONumHosts++; - found++; - } else { - iounmap(p->RIOHosts[p->RIONumHosts].Caddr); - p->RIOHosts[p->RIONumHosts].Caddr = NULL; - } -#else - printk(KERN_ERR "Found an older RIO PCI card, but the driver is not " "compiled to support it.\n"); -#endif - } -#endif /* PCI */ - - /* Now probe for ISA cards... */ - for (i = 0; i < NR_RIO_ADDRS; i++) { - hp = &p->RIOHosts[p->RIONumHosts]; - hp->PaddrP = rio_probe_addrs[i]; - /* There was something about the IRQs of these cards. 'Forget what.--REW */ - hp->Ivec = 0; - hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); - hp->CardP = (struct DpRam __iomem *) hp->Caddr; - hp->Type = RIO_AT; - hp->Copy = rio_copy_to_card; /* AT card PCI???? - PVDL - * -- YES! this is now a normal copy. Only the - * old PCI card uses the special PCI copy. - * Moreover, the ISA card will work with the - * special PCI copy anyway. -- REW */ - hp->Mode = 0; - spin_lock_init(&hp->HostLock); - - vpdp = get_VPD_PROM(hp); - rio_dprintk(RIO_DEBUG_PROBE, "Got VPD ROM\n"); - okboard = 0; - if ((strncmp(vpdp->identifier, RIO_ISA_IDENT, 16) == 0) || (strncmp(vpdp->identifier, RIO_ISA2_IDENT, 16) == 0) || (strncmp(vpdp->identifier, RIO_ISA3_IDENT, 16) == 0)) { - /* Board is present... */ - if (RIOBoardTest(hp->PaddrP, hp->Caddr, RIO_AT, 0) == 0) { - /* ... and feeling fine!!!! */ - rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); - if (RIOAssignAT(p, hp->PaddrP, hp->Caddr, 0)) { - rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, host%d uniqid = %x.\n", p->RIONumHosts, p->RIOHosts[p->RIONumHosts - 1].UniqueNum); - okboard++; - found++; - } - } - - if (!okboard) { - iounmap(hp->Caddr); - hp->Caddr = NULL; - } - } - } - - - for (i = 0; i < p->RIONumHosts; i++) { - hp = &p->RIOHosts[i]; - if (hp->Ivec) { - int mode = IRQF_SHARED; - if (hp->Ivec & 0x8000) { - mode = 0; - hp->Ivec &= 0x7fff; - } - rio_dprintk(RIO_DEBUG_INIT, "Requesting interrupt hp: %p rio_interrupt: %d Mode: %x\n", hp, hp->Ivec, hp->Mode); - retval = request_irq(hp->Ivec, rio_interrupt, mode, "rio", hp); - rio_dprintk(RIO_DEBUG_INIT, "Return value from request_irq: %d\n", retval); - if (retval) { - printk(KERN_ERR "rio: Cannot allocate irq %d.\n", hp->Ivec); - hp->Ivec = 0; - } - rio_dprintk(RIO_DEBUG_INIT, "Got irq %d.\n", hp->Ivec); - if (hp->Ivec != 0) { - rio_dprintk(RIO_DEBUG_INIT, "Enabling interrupts on rio card.\n"); - hp->Mode |= RIO_PCI_INT_ENABLE; - } else - hp->Mode &= ~RIO_PCI_INT_ENABLE; - rio_dprintk(RIO_DEBUG_INIT, "New Mode: %x\n", hp->Mode); - rio_start_card_running(hp); - } - /* Init the timer "always" to make sure that it can safely be - deleted when we unload... */ - - setup_timer(&hp->timer, rio_pollfunc, i); - if (!hp->Ivec) { - rio_dprintk(RIO_DEBUG_INIT, "Starting polling at %dj intervals.\n", rio_poll); - mod_timer(&hp->timer, jiffies + rio_poll); - } - } - - if (found) { - rio_dprintk(RIO_DEBUG_INIT, "rio: total of %d boards detected.\n", found); - rio_init_drivers(); - } else { - /* deregister the misc device we created earlier */ - misc_deregister(&rio_fw_device); - } - - func_exit(); - return found ? 0 : -EIO; -} - - -static void __exit rio_exit(void) -{ - int i; - struct Host *hp; - - func_enter(); - - for (i = 0, hp = p->RIOHosts; i < p->RIONumHosts; i++, hp++) { - RIOHostReset(hp->Type, hp->CardP, hp->Slot); - if (hp->Ivec) { - free_irq(hp->Ivec, hp); - rio_dprintk(RIO_DEBUG_INIT, "freed irq %d.\n", hp->Ivec); - } - /* It is safe/allowed to del_timer a non-active timer */ - del_timer_sync(&hp->timer); - if (hp->Caddr) - iounmap(hp->Caddr); - if (hp->Type == RIO_PCI) - pci_dev_put(hp->pdev); - } - - if (misc_deregister(&rio_fw_device) < 0) { - printk(KERN_INFO "rio: couldn't deregister control-device\n"); - } - - - rio_dprintk(RIO_DEBUG_CLEANUP, "Cleaning up drivers\n"); - - rio_release_drivers(); - - /* Release dynamically allocated memory */ - kfree(p->RIOPortp); - kfree(p->RIOHosts); - kfree(p); - - func_exit(); -} - -module_init(rio_init); -module_exit(rio_exit); diff --git a/drivers/char/rio/rio_linux.h b/drivers/char/rio/rio_linux.h deleted file mode 100644 index 7f26cd7c815e..000000000000 --- a/drivers/char/rio/rio_linux.h +++ /dev/null @@ -1,197 +0,0 @@ - -/* - * rio_linux.h - * - * Copyright (C) 1998,1999,2000 R.E.Wolff@BitWizard.nl - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * RIO serial driver. - * - * Version 1.0 -- July, 1999. - * - */ - -#define RIO_NBOARDS 4 -#define RIO_PORTSPERBOARD 128 -#define RIO_NPORTS (RIO_NBOARDS * RIO_PORTSPERBOARD) - -#define MODEM_SUPPORT - -#ifdef __KERNEL__ - -#define RIO_MAGIC 0x12345678 - - -struct vpd_prom { - unsigned short id; - char hwrev; - char hwass; - int uniqid; - char myear; - char mweek; - char hw_feature[5]; - char oem_id; - char identifier[16]; -}; - - -#define RIO_DEBUG_ALL 0xffffffff - -#define O_OTHER(tty) \ - ((O_OLCUC(tty)) ||\ - (O_ONLCR(tty)) ||\ - (O_OCRNL(tty)) ||\ - (O_ONOCR(tty)) ||\ - (O_ONLRET(tty)) ||\ - (O_OFILL(tty)) ||\ - (O_OFDEL(tty)) ||\ - (O_NLDLY(tty)) ||\ - (O_CRDLY(tty)) ||\ - (O_TABDLY(tty)) ||\ - (O_BSDLY(tty)) ||\ - (O_VTDLY(tty)) ||\ - (O_FFDLY(tty))) - -/* Same for input. */ -#define I_OTHER(tty) \ - ((I_INLCR(tty)) ||\ - (I_IGNCR(tty)) ||\ - (I_ICRNL(tty)) ||\ - (I_IUCLC(tty)) ||\ - (L_ISIG(tty))) - - -#endif /* __KERNEL__ */ - - -#define RIO_BOARD_INTR_LOCK 1 - - -#ifndef RIOCTL_MISC_MINOR -/* Allow others to gather this into "major.h" or something like that */ -#define RIOCTL_MISC_MINOR 169 -#endif - - -/* Allow us to debug "in the field" without requiring clients to - recompile.... */ -#if 1 -#define rio_spin_lock_irqsave(sem, flags) do { \ - rio_dprintk (RIO_DEBUG_SPINLOCK, "spinlockirqsave: %p %s:%d\n", \ - sem, __FILE__, __LINE__);\ - spin_lock_irqsave(sem, flags);\ - } while (0) - -#define rio_spin_unlock_irqrestore(sem, flags) do { \ - rio_dprintk (RIO_DEBUG_SPINLOCK, "spinunlockirqrestore: %p %s:%d\n",\ - sem, __FILE__, __LINE__);\ - spin_unlock_irqrestore(sem, flags);\ - } while (0) - -#define rio_spin_lock(sem) do { \ - rio_dprintk (RIO_DEBUG_SPINLOCK, "spinlock: %p %s:%d\n",\ - sem, __FILE__, __LINE__);\ - spin_lock(sem);\ - } while (0) - -#define rio_spin_unlock(sem) do { \ - rio_dprintk (RIO_DEBUG_SPINLOCK, "spinunlock: %p %s:%d\n",\ - sem, __FILE__, __LINE__);\ - spin_unlock(sem);\ - } while (0) -#else -#define rio_spin_lock_irqsave(sem, flags) \ - spin_lock_irqsave(sem, flags) - -#define rio_spin_unlock_irqrestore(sem, flags) \ - spin_unlock_irqrestore(sem, flags) - -#define rio_spin_lock(sem) \ - spin_lock(sem) - -#define rio_spin_unlock(sem) \ - spin_unlock(sem) - -#endif - - - -#ifdef CONFIG_RIO_OLDPCI -static inline void __iomem *rio_memcpy_toio(void __iomem *dummy, void __iomem *dest, void *source, int n) -{ - char __iomem *dst = dest; - char *src = source; - - while (n--) { - writeb(*src++, dst++); - (void) readb(dummy); - } - - return dest; -} - -static inline void __iomem *rio_copy_toio(void __iomem *dest, void *source, int n) -{ - char __iomem *dst = dest; - char *src = source; - - while (n--) - writeb(*src++, dst++); - - return dest; -} - - -static inline void *rio_memcpy_fromio(void *dest, void __iomem *source, int n) -{ - char *dst = dest; - char __iomem *src = source; - - while (n--) - *dst++ = readb(src++); - - return dest; -} - -#else -#define rio_memcpy_toio(dummy,dest,source,n) memcpy_toio(dest, source, n) -#define rio_copy_toio memcpy_toio -#define rio_memcpy_fromio memcpy_fromio -#endif - -#define DEBUG 1 - - -/* - This driver can spew a whole lot of debugging output at you. If you - need maximum performance, you should disable the DEBUG define. To - aid in debugging in the field, I'm leaving the compile-time debug - features enabled, and disable them "runtime". That allows me to - instruct people with problems to enable debugging without requiring - them to recompile... -*/ - -#ifdef DEBUG -#define rio_dprintk(f, str...) do { if (rio_debug & f) printk (str);} while (0) -#define func_enter() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s\n", __func__) -#define func_exit() rio_dprintk (RIO_DEBUG_FLOW, "rio: exit %s\n", __func__) -#define func_enter2() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s (port %d)\n",__func__, port->line) -#else -#define rio_dprintk(f, str...) /* nothing */ -#define func_enter() -#define func_exit() -#define func_enter2() -#endif diff --git a/drivers/char/rio/rioboard.h b/drivers/char/rio/rioboard.h deleted file mode 100644 index 252230043c82..000000000000 --- a/drivers/char/rio/rioboard.h +++ /dev/null @@ -1,275 +0,0 @@ -/************************************************************************/ -/* */ -/* Title : RIO Host Card Hardware Definitions */ -/* */ -/* Author : N.P.Vassallo */ -/* */ -/* Creation : 26th April 1999 */ -/* */ -/* Version : 1.0.0 */ -/* */ -/* Copyright : (c) Specialix International Ltd. 1999 * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * */ -/* Description : Prototypes, structures and definitions */ -/* describing the RIO board hardware */ -/* */ -/************************************************************************/ - -#ifndef _rioboard_h /* If RIOBOARD.H not already defined */ -#define _rioboard_h 1 - -/***************************************************************************** -*********************** *********************** -*********************** Hardware Control Registers *********************** -*********************** *********************** -*****************************************************************************/ - -/* Hardware Registers... */ - -#define RIO_REG_BASE 0x7C00 /* Base of control registers */ - -#define RIO_CONFIG RIO_REG_BASE + 0x0000 /* WRITE: Configuration Register */ -#define RIO_INTSET RIO_REG_BASE + 0x0080 /* WRITE: Interrupt Set */ -#define RIO_RESET RIO_REG_BASE + 0x0100 /* WRITE: Host Reset */ -#define RIO_INTRESET RIO_REG_BASE + 0x0180 /* WRITE: Interrupt Reset */ - -#define RIO_VPD_ROM RIO_REG_BASE + 0x0000 /* READ: Vital Product Data ROM */ -#define RIO_INTSTAT RIO_REG_BASE + 0x0080 /* READ: Interrupt Status (Jet boards only) */ -#define RIO_RESETSTAT RIO_REG_BASE + 0x0100 /* READ: Reset Status (Jet boards only) */ - -/* RIO_VPD_ROM definitions... */ -#define VPD_SLX_ID1 0x00 /* READ: Specialix Identifier #1 */ -#define VPD_SLX_ID2 0x01 /* READ: Specialix Identifier #2 */ -#define VPD_HW_REV 0x02 /* READ: Hardware Revision */ -#define VPD_HW_ASSEM 0x03 /* READ: Hardware Assembly Level */ -#define VPD_UNIQUEID4 0x04 /* READ: Unique Identifier #4 */ -#define VPD_UNIQUEID3 0x05 /* READ: Unique Identifier #3 */ -#define VPD_UNIQUEID2 0x06 /* READ: Unique Identifier #2 */ -#define VPD_UNIQUEID1 0x07 /* READ: Unique Identifier #1 */ -#define VPD_MANU_YEAR 0x08 /* READ: Year Of Manufacture (0 = 1970) */ -#define VPD_MANU_WEEK 0x09 /* READ: Week Of Manufacture (0 = week 1 Jan) */ -#define VPD_HWFEATURE1 0x0A /* READ: Hardware Feature Byte 1 */ -#define VPD_HWFEATURE2 0x0B /* READ: Hardware Feature Byte 2 */ -#define VPD_HWFEATURE3 0x0C /* READ: Hardware Feature Byte 3 */ -#define VPD_HWFEATURE4 0x0D /* READ: Hardware Feature Byte 4 */ -#define VPD_HWFEATURE5 0x0E /* READ: Hardware Feature Byte 5 */ -#define VPD_OEMID 0x0F /* READ: OEM Identifier */ -#define VPD_IDENT 0x10 /* READ: Identifier string (16 bytes) */ -#define VPD_IDENT_LEN 0x10 - -/* VPD ROM Definitions... */ -#define SLX_ID1 0x4D -#define SLX_ID2 0x98 - -#define PRODUCT_ID(a) ((a>>4)&0xF) /* Use to obtain Product ID from VPD_UNIQUEID1 */ - -#define ID_SX_ISA 0x2 -#define ID_RIO_EISA 0x3 -#define ID_SX_PCI 0x5 -#define ID_SX_EISA 0x7 -#define ID_RIO_RTA16 0x9 -#define ID_RIO_ISA 0xA -#define ID_RIO_MCA 0xB -#define ID_RIO_SBUS 0xC -#define ID_RIO_PCI 0xD -#define ID_RIO_RTA8 0xE - -/* Transputer bootstrap definitions... */ - -#define BOOTLOADADDR (0x8000 - 6) -#define BOOTINDICATE (0x8000 - 2) - -/* Firmware load position... */ - -#define FIRMWARELOADADDR 0x7C00 /* Firmware is loaded _before_ this address */ - -/***************************************************************************** -***************************** ***************************** -***************************** RIO (Rev1) ISA ***************************** -***************************** ***************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_ISA_IDENT "JBJGPGGHINSMJPJR" - -#define RIO_ISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_ISA_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_ISA_CFG_IRQMASK 0x30 /* Interrupt mask */ -#define RIO_ISA_CFG_IRQ12 0x10 /* Interrupt Level 12 */ -#define RIO_ISA_CFG_IRQ11 0x20 /* Interrupt Level 11 */ -#define RIO_ISA_CFG_IRQ9 0x30 /* Interrupt Level 9 */ -#define RIO_ISA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ -#define RIO_ISA_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */ - -/***************************************************************************** -***************************** ***************************** -***************************** RIO (Rev2) ISA ***************************** -***************************** ***************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_ISA2_IDENT "JBJGPGGHINSMJPJR" - -#define RIO_ISA2_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_ISA2_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_ISA2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ -#define RIO_ISA2_CFG_16BIT 0x08 /* 16bit mode, else 8bit */ -#define RIO_ISA2_CFG_IRQMASK 0x30 /* Interrupt mask */ -#define RIO_ISA2_CFG_IRQ15 0x00 /* Interrupt Level 15 */ -#define RIO_ISA2_CFG_IRQ12 0x10 /* Interrupt Level 12 */ -#define RIO_ISA2_CFG_IRQ11 0x20 /* Interrupt Level 11 */ -#define RIO_ISA2_CFG_IRQ9 0x30 /* Interrupt Level 9 */ -#define RIO_ISA2_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ -#define RIO_ISA2_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */ - -/***************************************************************************** -***************************** ****************************** -***************************** RIO (Jet) ISA ****************************** -***************************** ****************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_ISA3_IDENT "JET HOST BY KEV#" - -#define RIO_ISA3_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_ISA3_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ -#define RIO_ISA32_CFG_IRQMASK 0xF30 /* Interrupt mask */ -#define RIO_ISA3_CFG_IRQ15 0xF0 /* Interrupt Level 15 */ -#define RIO_ISA3_CFG_IRQ12 0xC0 /* Interrupt Level 12 */ -#define RIO_ISA3_CFG_IRQ11 0xB0 /* Interrupt Level 11 */ -#define RIO_ISA3_CFG_IRQ10 0xA0 /* Interrupt Level 10 */ -#define RIO_ISA3_CFG_IRQ9 0x90 /* Interrupt Level 9 */ - -/***************************************************************************** -********************************* ******************************** -********************************* RIO MCA ******************************** -********************************* ******************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_MCA_IDENT "JBJGPGGHINSMJPJR" - -#define RIO_MCA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_MCA_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_MCA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ - -/***************************************************************************** -******************************** ******************************** -******************************** RIO EISA ******************************** -******************************** ******************************** -*****************************************************************************/ - -/* EISA Configuration Space Definitions... */ -#define EISA_PRODUCT_ID1 0xC80 -#define EISA_PRODUCT_ID2 0xC81 -#define EISA_PRODUCT_NUMBER 0xC82 -#define EISA_REVISION_NUMBER 0xC83 -#define EISA_CARD_ENABLE 0xC84 -#define EISA_VPD_UNIQUEID4 0xC88 /* READ: Unique Identifier #4 */ -#define EISA_VPD_UNIQUEID3 0xC8A /* READ: Unique Identifier #3 */ -#define EISA_VPD_UNIQUEID2 0xC90 /* READ: Unique Identifier #2 */ -#define EISA_VPD_UNIQUEID1 0xC92 /* READ: Unique Identifier #1 */ -#define EISA_VPD_MANU_YEAR 0xC98 /* READ: Year Of Manufacture (0 = 1970) */ -#define EISA_VPD_MANU_WEEK 0xC9A /* READ: Week Of Manufacture (0 = week 1 Jan) */ -#define EISA_MEM_ADDR_23_16 0xC00 -#define EISA_MEM_ADDR_31_24 0xC01 -#define EISA_RIO_CONFIG 0xC02 /* WRITE: Configuration Register */ -#define EISA_RIO_INTSET 0xC03 /* WRITE: Interrupt Set */ -#define EISA_RIO_INTRESET 0xC03 /* READ: Interrupt Reset */ - -/* Control Register Definitions... */ -#define RIO_EISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_EISA_CFG_LINK20 0x02 /* 20Mbps link, else 10Mbps */ -#define RIO_EISA_CFG_BUSENABLE 0x04 /* Enable processor bus */ -#define RIO_EISA_CFG_PROCRUN 0x08 /* Processor running, else reset */ -#define RIO_EISA_CFG_IRQMASK 0xF0 /* Interrupt mask */ -#define RIO_EISA_CFG_IRQ15 0xF0 /* Interrupt Level 15 */ -#define RIO_EISA_CFG_IRQ14 0xE0 /* Interrupt Level 14 */ -#define RIO_EISA_CFG_IRQ12 0xC0 /* Interrupt Level 12 */ -#define RIO_EISA_CFG_IRQ11 0xB0 /* Interrupt Level 11 */ -#define RIO_EISA_CFG_IRQ10 0xA0 /* Interrupt Level 10 */ -#define RIO_EISA_CFG_IRQ9 0x90 /* Interrupt Level 9 */ -#define RIO_EISA_CFG_IRQ7 0x70 /* Interrupt Level 7 */ -#define RIO_EISA_CFG_IRQ6 0x60 /* Interrupt Level 6 */ -#define RIO_EISA_CFG_IRQ5 0x50 /* Interrupt Level 5 */ -#define RIO_EISA_CFG_IRQ4 0x40 /* Interrupt Level 4 */ -#define RIO_EISA_CFG_IRQ3 0x30 /* Interrupt Level 3 */ - -/***************************************************************************** -******************************** ******************************** -******************************** RIO SBus ******************************** -******************************** ******************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_SBUS_IDENT "JBPGK#\0\0\0\0\0\0\0\0\0\0" - -#define RIO_SBUS_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_SBUS_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_SBUS_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ -#define RIO_SBUS_CFG_IRQMASK 0x38 /* Interrupt mask */ -#define RIO_SBUS_CFG_IRQNONE 0x00 /* No Interrupt */ -#define RIO_SBUS_CFG_IRQ7 0x38 /* Interrupt Level 7 */ -#define RIO_SBUS_CFG_IRQ6 0x30 /* Interrupt Level 6 */ -#define RIO_SBUS_CFG_IRQ5 0x28 /* Interrupt Level 5 */ -#define RIO_SBUS_CFG_IRQ4 0x20 /* Interrupt Level 4 */ -#define RIO_SBUS_CFG_IRQ3 0x18 /* Interrupt Level 3 */ -#define RIO_SBUS_CFG_IRQ2 0x10 /* Interrupt Level 2 */ -#define RIO_SBUS_CFG_IRQ1 0x08 /* Interrupt Level 1 */ -#define RIO_SBUS_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ -#define RIO_SBUS_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */ - -/***************************************************************************** -********************************* ******************************** -********************************* RIO PCI ******************************** -********************************* ******************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_PCI_IDENT "ECDDPGJGJHJRGSK#" - -#define RIO_PCI_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_PCI_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_PCI_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ -#define RIO_PCI_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ -#define RIO_PCI_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */ - -/* PCI Definitions... */ -#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */ -#define SPX_DEVICE_ID 0x8000 /* RIO bridge boards */ -#define SPX_PLXDEVICE_ID 0x2000 /* PLX bridge boards */ -#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */ -#define RIO_SUB_SYS_ID 0x0800 /* RIO PCI board */ - -/***************************************************************************** -***************************** ****************************** -***************************** RIO (Jet) PCI ****************************** -***************************** ****************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_PCI2_IDENT "JET HOST BY KEV#" - -#define RIO_PCI2_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_PCI2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ - -/* PCI Definitions... */ -#define RIO2_SUB_SYS_ID 0x0100 /* RIO (Jet) PCI board */ - -#endif /*_rioboard_h */ - -/* End of RIOBOARD.H */ diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c deleted file mode 100644 index d956dd316005..000000000000 --- a/drivers/char/rio/rioboot.c +++ /dev/null @@ -1,1113 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioboot.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:36 -** Retrieved : 11/6/98 10:33:48 -** -** ident @(#)rioboot.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" - -static int RIOBootComplete(struct rio_info *p, struct Host *HostP, unsigned int Rup, struct PktCmd __iomem *PktCmdP); - -static const unsigned char RIOAtVec2Ctrl[] = { - /* 0 */ INTERRUPT_DISABLE, - /* 1 */ INTERRUPT_DISABLE, - /* 2 */ INTERRUPT_DISABLE, - /* 3 */ INTERRUPT_DISABLE, - /* 4 */ INTERRUPT_DISABLE, - /* 5 */ INTERRUPT_DISABLE, - /* 6 */ INTERRUPT_DISABLE, - /* 7 */ INTERRUPT_DISABLE, - /* 8 */ INTERRUPT_DISABLE, - /* 9 */ IRQ_9 | INTERRUPT_ENABLE, - /* 10 */ INTERRUPT_DISABLE, - /* 11 */ IRQ_11 | INTERRUPT_ENABLE, - /* 12 */ IRQ_12 | INTERRUPT_ENABLE, - /* 13 */ INTERRUPT_DISABLE, - /* 14 */ INTERRUPT_DISABLE, - /* 15 */ IRQ_15 | INTERRUPT_ENABLE -}; - -/** - * RIOBootCodeRTA - Load RTA boot code - * @p: RIO to load - * @rbp: Download descriptor - * - * Called when the user process initiates booting of the card firmware. - * Lads the firmware - */ - -int RIOBootCodeRTA(struct rio_info *p, struct DownLoad * rbp) -{ - int offset; - - func_enter(); - - rio_dprintk(RIO_DEBUG_BOOT, "Data at user address %p\n", rbp->DataP); - - /* - ** Check that we have set asside enough memory for this - */ - if (rbp->Count > SIXTY_FOUR_K) { - rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n"); - p->RIOError.Error = HOST_FILE_TOO_LARGE; - func_exit(); - return -ENOMEM; - } - - if (p->RIOBooting) { - rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code : BUSY BUSY BUSY!\n"); - p->RIOError.Error = BOOT_IN_PROGRESS; - func_exit(); - return -EBUSY; - } - - /* - ** The data we load in must end on a (RTA_BOOT_DATA_SIZE) byte boundary, - ** so calculate how far we have to move the data up the buffer - ** to achieve this. - */ - offset = (RTA_BOOT_DATA_SIZE - (rbp->Count % RTA_BOOT_DATA_SIZE)) % RTA_BOOT_DATA_SIZE; - - /* - ** Be clean, and clear the 'unused' portion of the boot buffer, - ** because it will (eventually) be part of the Rta run time environment - ** and so should be zeroed. - */ - memset(p->RIOBootPackets, 0, offset); - - /* - ** Copy the data from user space into the array - */ - - if (copy_from_user(((u8 *)p->RIOBootPackets) + offset, rbp->DataP, rbp->Count)) { - rio_dprintk(RIO_DEBUG_BOOT, "Bad data copy from user space\n"); - p->RIOError.Error = COPYIN_FAILED; - func_exit(); - return -EFAULT; - } - - /* - ** Make sure that our copy of the size includes that offset we discussed - ** earlier. - */ - p->RIONumBootPkts = (rbp->Count + offset) / RTA_BOOT_DATA_SIZE; - p->RIOBootCount = rbp->Count; - - func_exit(); - return 0; -} - -/** - * rio_start_card_running - host card start - * @HostP: The RIO to kick off - * - * Start a RIO processor unit running. Encapsulates the knowledge - * of the card type. - */ - -void rio_start_card_running(struct Host *HostP) -{ - switch (HostP->Type) { - case RIO_AT: - rio_dprintk(RIO_DEBUG_BOOT, "Start ISA card running\n"); - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_ON | HostP->Mode | RIOAtVec2Ctrl[HostP->Ivec & 0xF], &HostP->Control); - break; - case RIO_PCI: - /* - ** PCI is much the same as MCA. Everything is once again memory - ** mapped, so we are writing to memory registers instead of io - ** ports. - */ - rio_dprintk(RIO_DEBUG_BOOT, "Start PCI card running\n"); - writeb(PCITpBootFromRam | PCITpBusEnable | HostP->Mode, &HostP->Control); - break; - default: - rio_dprintk(RIO_DEBUG_BOOT, "Unknown host type %d\n", HostP->Type); - break; - } - return; -} - -/* -** Load in the host boot code - load it directly onto all halted hosts -** of the correct type. -** -** Put your rubber pants on before messing with this code - even the magic -** numbers have trouble understanding what they are doing here. -*/ - -int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp) -{ - struct Host *HostP; - u8 __iomem *Cad; - PARM_MAP __iomem *ParmMapP; - int RupN; - int PortN; - unsigned int host; - u8 __iomem *StartP; - u8 __iomem *DestP; - int wait_count; - u16 OldParmMap; - u16 offset; /* It is very important that this is a u16 */ - u8 *DownCode = NULL; - unsigned long flags; - - HostP = NULL; /* Assure the compiler we've initialized it */ - - - /* Walk the hosts */ - for (host = 0; host < p->RIONumHosts; host++) { - rio_dprintk(RIO_DEBUG_BOOT, "Attempt to boot host %d\n", host); - HostP = &p->RIOHosts[host]; - - rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec); - - /* Don't boot hosts already running */ - if ((HostP->Flags & RUN_STATE) != RC_WAITING) { - rio_dprintk(RIO_DEBUG_BOOT, "%s %d already running\n", "Host", host); - continue; - } - - /* - ** Grab a pointer to the card (ioremapped) - */ - Cad = HostP->Caddr; - - /* - ** We are going to (try) and load in rbp->Count bytes. - ** The last byte will reside at p->RIOConf.HostLoadBase-1; - ** Therefore, we need to start copying at address - ** (caddr+p->RIOConf.HostLoadBase-rbp->Count) - */ - StartP = &Cad[p->RIOConf.HostLoadBase - rbp->Count]; - - rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for host is %p\n", Cad); - rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for download is %p\n", StartP); - rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase); - rio_dprintk(RIO_DEBUG_BOOT, "size of download is 0x%x\n", rbp->Count); - - /* Make sure it fits */ - if (p->RIOConf.HostLoadBase < rbp->Count) { - rio_dprintk(RIO_DEBUG_BOOT, "Bin too large\n"); - p->RIOError.Error = HOST_FILE_TOO_LARGE; - func_exit(); - return -EFBIG; - } - /* - ** Ensure that the host really is stopped. - ** Disable it's external bus & twang its reset line. - */ - RIOHostReset(HostP->Type, HostP->CardP, HostP->Slot); - - /* - ** Copy the data directly from user space to the SRAM. - ** This ain't going to be none too clever if the download - ** code is bigger than this segment. - */ - rio_dprintk(RIO_DEBUG_BOOT, "Copy in code\n"); - - /* Buffer to local memory as we want to use I/O space and - some cards only do 8 or 16 bit I/O */ - - DownCode = vmalloc(rbp->Count); - if (!DownCode) { - p->RIOError.Error = NOT_ENOUGH_CORE_FOR_PCI_COPY; - func_exit(); - return -ENOMEM; - } - if (copy_from_user(DownCode, rbp->DataP, rbp->Count)) { - kfree(DownCode); - p->RIOError.Error = COPYIN_FAILED; - func_exit(); - return -EFAULT; - } - HostP->Copy(DownCode, StartP, rbp->Count); - vfree(DownCode); - - rio_dprintk(RIO_DEBUG_BOOT, "Copy completed\n"); - - /* - ** S T O P ! - ** - ** Upto this point the code has been fairly rational, and possibly - ** even straight forward. What follows is a pile of crud that will - ** magically turn into six bytes of transputer assembler. Normally - ** you would expect an array or something, but, being me, I have - ** chosen [been told] to use a technique whereby the startup code - ** will be correct if we change the loadbase for the code. Which - ** brings us onto another issue - the loadbase is the *end* of the - ** code, not the start. - ** - ** If I were you I wouldn't start from here. - */ - - /* - ** We now need to insert a short boot section into - ** the memory at the end of Sram2. This is normally (de)composed - ** of the last eight bytes of the download code. The - ** download has been assembled/compiled to expect to be - ** loaded from 0x7FFF downwards. We have loaded it - ** at some other address. The startup code goes into the small - ** ram window at Sram2, in the last 8 bytes, which are really - ** at addresses 0x7FF8-0x7FFF. - ** - ** If the loadbase is, say, 0x7C00, then we need to branch to - ** address 0x7BFE to run the host.bin startup code. We assemble - ** this jump manually. - ** - ** The two byte sequence 60 08 is loaded into memory at address - ** 0x7FFE,F. This is a local branch to location 0x7FF8 (60 is nfix 0, - ** which adds '0' to the .O register, complements .O, and then shifts - ** it left by 4 bit positions, 08 is a jump .O+8 instruction. This will - ** add 8 to .O (which was 0xFFF0), and will branch RELATIVE to the new - ** location. Now, the branch starts from the value of .PC (or .IP or - ** whatever the bloody register is called on this chip), and the .PC - ** will be pointing to the location AFTER the branch, in this case - ** .PC == 0x8000, so the branch will be to 0x8000+0xFFF8 = 0x7FF8. - ** - ** A long branch is coded at 0x7FF8. This consists of loading a four - ** byte offset into .O using nfix (as above) and pfix operators. The - ** pfix operates in exactly the same way as the nfix operator, but - ** without the complement operation. The offset, of course, must be - ** relative to the address of the byte AFTER the branch instruction, - ** which will be (urm) 0x7FFC, so, our final destination of the branch - ** (loadbase-2), has to be reached from here. Imagine that the loadbase - ** is 0x7C00 (which it is), then we will need to branch to 0x7BFE (which - ** is the first byte of the initial two byte short local branch of the - ** download code). - ** - ** To code a jump from 0x7FFC (which is where the branch will start - ** from) to 0x7BFE, we will need to branch 0xFC02 bytes (0x7FFC+0xFC02)= - ** 0x7BFE. - ** This will be coded as four bytes: - ** 60 2C 20 02 - ** being nfix .O+0 - ** pfix .O+C - ** pfix .O+0 - ** jump .O+2 - ** - ** The nfix operator is used, so that the startup code will be - ** compatible with the whole Tp family. (lies, damn lies, it'll never - ** work in a month of Sundays). - ** - ** The nfix nyble is the 1s complement of the nyble value you - ** want to load - in this case we wanted 'F' so we nfix loaded '0'. - */ - - - /* - ** Dest points to the top 8 bytes of Sram2. The Tp jumps - ** to 0x7FFE at reset time, and starts executing. This is - ** a short branch to 0x7FF8, where a long branch is coded. - */ - - DestP = &Cad[0x7FF8]; /* <<<---- READ THE ABOVE COMMENTS */ - -#define NFIX(N) (0x60 | (N)) /* .O = (~(.O + N))<<4 */ -#define PFIX(N) (0x20 | (N)) /* .O = (.O + N)<<4 */ -#define JUMP(N) (0x00 | (N)) /* .PC = .PC + .O */ - - /* - ** 0x7FFC is the address of the location following the last byte of - ** the four byte jump instruction. - ** READ THE ABOVE COMMENTS - ** - ** offset is (TO-FROM) % MEMSIZE, but with compound buggering about. - ** Memsize is 64K for this range of Tp, so offset is a short (unsigned, - ** cos I don't understand 2's complement). - */ - offset = (p->RIOConf.HostLoadBase - 2) - 0x7FFC; - - writeb(NFIX(((unsigned short) (~offset) >> (unsigned short) 12) & 0xF), DestP); - writeb(PFIX((offset >> 8) & 0xF), DestP + 1); - writeb(PFIX((offset >> 4) & 0xF), DestP + 2); - writeb(JUMP(offset & 0xF), DestP + 3); - - writeb(NFIX(0), DestP + 6); - writeb(JUMP(8), DestP + 7); - - rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase); - rio_dprintk(RIO_DEBUG_BOOT, "startup offset is 0x%x\n", offset); - - /* - ** Flag what is going on - */ - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_STARTUP; - - /* - ** Grab a copy of the current ParmMap pointer, so we - ** can tell when it has changed. - */ - OldParmMap = readw(&HostP->__ParmMapR); - - rio_dprintk(RIO_DEBUG_BOOT, "Original parmmap is 0x%x\n", OldParmMap); - - /* - ** And start it running (I hope). - ** As there is nothing dodgy or obscure about the - ** above code, this is guaranteed to work every time. - */ - rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec); - - rio_start_card_running(HostP); - - rio_dprintk(RIO_DEBUG_BOOT, "Set control port\n"); - - /* - ** Now, wait for upto five seconds for the Tp to setup the parmmap - ** pointer: - */ - for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && (readw(&HostP->__ParmMapR) == OldParmMap); wait_count++) { - rio_dprintk(RIO_DEBUG_BOOT, "Checkout %d, 0x%x\n", wait_count, readw(&HostP->__ParmMapR)); - mdelay(100); - - } - - /* - ** If the parmmap pointer is unchanged, then the host code - ** has crashed & burned in a really spectacular way - */ - if (readw(&HostP->__ParmMapR) == OldParmMap) { - rio_dprintk(RIO_DEBUG_BOOT, "parmmap 0x%x\n", readw(&HostP->__ParmMapR)); - rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail\n"); - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_STUFFED; - RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); - continue; - } - - rio_dprintk(RIO_DEBUG_BOOT, "Running 0x%x\n", readw(&HostP->__ParmMapR)); - - /* - ** Well, the board thought it was OK, and setup its parmmap - ** pointer. For the time being, we will pretend that this - ** board is running, and check out what the error flag says. - */ - - /* - ** Grab a 32 bit pointer to the parmmap structure - */ - ParmMapP = (PARM_MAP __iomem *) RIO_PTR(Cad, readw(&HostP->__ParmMapR)); - rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %p\n", ParmMapP); - ParmMapP = (PARM_MAP __iomem *)(Cad + readw(&HostP->__ParmMapR)); - rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %p\n", ParmMapP); - - /* - ** The links entry should be 0xFFFF; we set it up - ** with a mask to say how many PHBs to use, and - ** which links to use. - */ - if (readw(&ParmMapP->links) != 0xFFFF) { - rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name); - rio_dprintk(RIO_DEBUG_BOOT, "Links = 0x%x\n", readw(&ParmMapP->links)); - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_STUFFED; - RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); - continue; - } - - writew(RIO_LINK_ENABLE, &ParmMapP->links); - - /* - ** now wait for the card to set all the parmmap->XXX stuff - ** this is a wait of upto two seconds.... - */ - rio_dprintk(RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n", p->RIOConf.StartupTime); - HostP->timeout_id = 0; - for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && !readw(&ParmMapP->init_done); wait_count++) { - rio_dprintk(RIO_DEBUG_BOOT, "Waiting for init_done\n"); - mdelay(100); - } - rio_dprintk(RIO_DEBUG_BOOT, "OK! init_done!\n"); - - if (readw(&ParmMapP->error) != E_NO_ERROR || !readw(&ParmMapP->init_done)) { - rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name); - rio_dprintk(RIO_DEBUG_BOOT, "Timedout waiting for init_done\n"); - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_STUFFED; - RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); - continue; - } - - rio_dprintk(RIO_DEBUG_BOOT, "Got init_done\n"); - - /* - ** It runs! It runs! - */ - rio_dprintk(RIO_DEBUG_BOOT, "Host ID %x Running\n", HostP->UniqueNum); - - /* - ** set the time period between interrupts. - */ - writew(p->RIOConf.Timer, &ParmMapP->timer); - - /* - ** Translate all the 16 bit pointers in the __ParmMapR into - ** 32 bit pointers for the driver in ioremap space. - */ - HostP->ParmMapP = ParmMapP; - HostP->PhbP = (struct PHB __iomem *) RIO_PTR(Cad, readw(&ParmMapP->phb_ptr)); - HostP->RupP = (struct RUP __iomem *) RIO_PTR(Cad, readw(&ParmMapP->rups)); - HostP->PhbNumP = (unsigned short __iomem *) RIO_PTR(Cad, readw(&ParmMapP->phb_num_ptr)); - HostP->LinkStrP = (struct LPB __iomem *) RIO_PTR(Cad, readw(&ParmMapP->link_str_ptr)); - - /* - ** point the UnixRups at the real Rups - */ - for (RupN = 0; RupN < MAX_RUP; RupN++) { - HostP->UnixRups[RupN].RupP = &HostP->RupP[RupN]; - HostP->UnixRups[RupN].Id = RupN + 1; - HostP->UnixRups[RupN].BaseSysPort = NO_PORT; - spin_lock_init(&HostP->UnixRups[RupN].RupLock); - } - - for (RupN = 0; RupN < LINKS_PER_UNIT; RupN++) { - HostP->UnixRups[RupN + MAX_RUP].RupP = &HostP->LinkStrP[RupN].rup; - HostP->UnixRups[RupN + MAX_RUP].Id = 0; - HostP->UnixRups[RupN + MAX_RUP].BaseSysPort = NO_PORT; - spin_lock_init(&HostP->UnixRups[RupN + MAX_RUP].RupLock); - } - - /* - ** point the PortP->Phbs at the real Phbs - */ - for (PortN = p->RIOFirstPortsMapped; PortN < p->RIOLastPortsMapped + PORTS_PER_RTA; PortN++) { - if (p->RIOPortp[PortN]->HostP == HostP) { - struct Port *PortP = p->RIOPortp[PortN]; - struct PHB __iomem *PhbP; - /* int oldspl; */ - - if (!PortP->Mapped) - continue; - - PhbP = &HostP->PhbP[PortP->HostPort]; - rio_spin_lock_irqsave(&PortP->portSem, flags); - - PortP->PhbP = PhbP; - - PortP->TxAdd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_add)); - PortP->TxStart = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_start)); - PortP->TxEnd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_end)); - PortP->RxRemove = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_remove)); - PortP->RxStart = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_start)); - PortP->RxEnd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_end)); - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - /* - ** point the UnixRup at the base SysPort - */ - if (!(PortN % PORTS_PER_RTA)) - HostP->UnixRups[PortP->RupNum].BaseSysPort = PortN; - } - } - - rio_dprintk(RIO_DEBUG_BOOT, "Set the card running... \n"); - /* - ** last thing - show the world that everything is in place - */ - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_RUNNING; - } - /* - ** MPX always uses a poller. This is actually patched into the system - ** configuration and called directly from each clock tick. - ** - */ - p->RIOPolling = 1; - - p->RIOSystemUp++; - - rio_dprintk(RIO_DEBUG_BOOT, "Done everything %x\n", HostP->Ivec); - func_exit(); - return 0; -} - - - -/** - * RIOBootRup - Boot an RTA - * @p: rio we are working with - * @Rup: Rup number - * @HostP: host object - * @PacketP: packet to use - * - * If we have successfully processed this boot, then - * return 1. If we havent, then return 0. - */ - -int RIOBootRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem *PacketP) -{ - struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data; - struct PktCmd_M *PktReplyP; - struct CmdBlk *CmdBlkP; - unsigned int sequence; - - /* - ** If we haven't been told what to boot, we can't boot it. - */ - if (p->RIONumBootPkts == 0) { - rio_dprintk(RIO_DEBUG_BOOT, "No RTA code to download yet\n"); - return 0; - } - - /* - ** Special case of boot completed - if we get one of these then we - ** don't need a command block. For all other cases we do, so handle - ** this first and then get a command block, then handle every other - ** case, relinquishing the command block if disaster strikes! - */ - if ((readb(&PacketP->len) & PKT_CMD_BIT) && (readb(&PktCmdP->Command) == BOOT_COMPLETED)) - return RIOBootComplete(p, HostP, Rup, PktCmdP); - - /* - ** Try to allocate a command block. This is in kernel space - */ - if (!(CmdBlkP = RIOGetCmdBlk())) { - rio_dprintk(RIO_DEBUG_BOOT, "No command blocks to boot RTA! come back later.\n"); - return 0; - } - - /* - ** Fill in the default info on the command block - */ - CmdBlkP->Packet.dest_unit = Rup < (unsigned short) MAX_RUP ? Rup : 0; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - - CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; - PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data; - - /* - ** process COMMANDS on the boot rup! - */ - if (readb(&PacketP->len) & PKT_CMD_BIT) { - /* - ** We only expect one type of command - a BOOT_REQUEST! - */ - if (readb(&PktCmdP->Command) != BOOT_REQUEST) { - rio_dprintk(RIO_DEBUG_BOOT, "Unexpected command %d on BOOT RUP %d of host %Zd\n", readb(&PktCmdP->Command), Rup, HostP - p->RIOHosts); - RIOFreeCmdBlk(CmdBlkP); - return 1; - } - - /* - ** Build a Boot Sequence command block - ** - ** We no longer need to use "Boot Mode", we'll always allow - ** boot requests - the boot will not complete if the device - ** appears in the bindings table. - ** - ** We'll just (always) set the command field in packet reply - ** to allow an attempted boot sequence : - */ - PktReplyP->Command = BOOT_SEQUENCE; - - PktReplyP->BootSequence.NumPackets = p->RIONumBootPkts; - PktReplyP->BootSequence.LoadBase = p->RIOConf.RtaLoadBase; - PktReplyP->BootSequence.CodeSize = p->RIOBootCount; - - CmdBlkP->Packet.len = BOOT_SEQUENCE_LEN | PKT_CMD_BIT; - - memcpy((void *) &CmdBlkP->Packet.data[BOOT_SEQUENCE_LEN], "BOOT", 4); - - rio_dprintk(RIO_DEBUG_BOOT, "Boot RTA on Host %Zd Rup %d - %d (0x%x) packets to 0x%x\n", HostP - p->RIOHosts, Rup, p->RIONumBootPkts, p->RIONumBootPkts, p->RIOConf.RtaLoadBase); - - /* - ** If this host is in slave mode, send the RTA an invalid boot - ** sequence command block to force it to kill the boot. We wait - ** for half a second before sending this packet to prevent the RTA - ** attempting to boot too often. The master host should then grab - ** the RTA and make it its own. - */ - p->RIOBooting++; - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; - } - - /* - ** It is a request for boot data. - */ - sequence = readw(&PktCmdP->Sequence); - - rio_dprintk(RIO_DEBUG_BOOT, "Boot block %d on Host %Zd Rup%d\n", sequence, HostP - p->RIOHosts, Rup); - - if (sequence >= p->RIONumBootPkts) { - rio_dprintk(RIO_DEBUG_BOOT, "Got a request for packet %d, max is %d\n", sequence, p->RIONumBootPkts); - } - - PktReplyP->Sequence = sequence; - memcpy(PktReplyP->BootData, p->RIOBootPackets[p->RIONumBootPkts - sequence - 1], RTA_BOOT_DATA_SIZE); - CmdBlkP->Packet.len = PKT_MAX_DATA_LEN; - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; -} - -/** - * RIOBootComplete - RTA boot is done - * @p: RIO we are working with - * @HostP: Host structure - * @Rup: RUP being used - * @PktCmdP: Packet command that was used - * - * This function is called when an RTA been booted. - * If booted by a host, HostP->HostUniqueNum is the booting host. - * If booted by an RTA, HostP->Mapping[Rup].RtaUniqueNum is the booting RTA. - * RtaUniq is the booted RTA. - */ - -static int RIOBootComplete(struct rio_info *p, struct Host *HostP, unsigned int Rup, struct PktCmd __iomem *PktCmdP) -{ - struct Map *MapP = NULL; - struct Map *MapP2 = NULL; - int Flag; - int found; - int host, rta; - int EmptySlot = -1; - int entry, entry2; - char *MyType, *MyName; - unsigned int MyLink; - unsigned short RtaType; - u32 RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24); - - p->RIOBooting = 0; - - rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot completed - BootInProgress now %d\n", p->RIOBooting); - - /* - ** Determine type of unit (16/8 port RTA). - */ - - RtaType = GetUnitType(RtaUniq); - if (Rup >= (unsigned short) MAX_RUP) - rio_dprintk(RIO_DEBUG_BOOT, "RIO: Host %s has booted an RTA(%d) on link %c\n", HostP->Name, 8 * RtaType, readb(&PktCmdP->LinkNum) + 'A'); - else - rio_dprintk(RIO_DEBUG_BOOT, "RIO: RTA %s has booted an RTA(%d) on link %c\n", HostP->Mapping[Rup].Name, 8 * RtaType, readb(&PktCmdP->LinkNum) + 'A'); - - rio_dprintk(RIO_DEBUG_BOOT, "UniqNum is 0x%x\n", RtaUniq); - - if (RtaUniq == 0x00000000 || RtaUniq == 0xffffffff) { - rio_dprintk(RIO_DEBUG_BOOT, "Illegal RTA Uniq Number\n"); - return 1; - } - - /* - ** If this RTA has just booted an RTA which doesn't belong to this - ** system, or the system is in slave mode, do not attempt to create - ** a new table entry for it. - */ - - if (!RIOBootOk(p, HostP, RtaUniq)) { - MyLink = readb(&PktCmdP->LinkNum); - if (Rup < (unsigned short) MAX_RUP) { - /* - ** RtaUniq was clone booted (by this RTA). Instruct this RTA - ** to hold off further attempts to boot on this link for 30 - ** seconds. - */ - if (RIOSuspendBootRta(HostP, HostP->Mapping[Rup].ID, MyLink)) { - rio_dprintk(RIO_DEBUG_BOOT, "RTA failed to suspend booting on link %c\n", 'A' + MyLink); - } - } else - /* - ** RtaUniq was booted by this host. Set the booting link - ** to hold off for 30 seconds to give another unit a - ** chance to boot it. - */ - writew(30, &HostP->LinkStrP[MyLink].WaitNoBoot); - rio_dprintk(RIO_DEBUG_BOOT, "RTA %x not owned - suspend booting down link %c on unit %x\n", RtaUniq, 'A' + MyLink, HostP->Mapping[Rup].RtaUniqueNum); - return 1; - } - - /* - ** Check for a SLOT_IN_USE entry for this RTA attached to the - ** current host card in the driver table. - ** - ** If it exists, make a note that we have booted it. Other parts of - ** the driver are interested in this information at a later date, - ** in particular when the booting RTA asks for an ID for this unit, - ** we must have set the BOOTED flag, and the NEWBOOT flag is used - ** to force an open on any ports that where previously open on this - ** unit. - */ - for (entry = 0; entry < MAX_RUP; entry++) { - unsigned int sysport; - - if ((HostP->Mapping[entry].Flags & SLOT_IN_USE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) { - HostP->Mapping[entry].Flags |= RTA_BOOTED | RTA_NEWBOOT; - if ((sysport = HostP->Mapping[entry].SysPort) != NO_PORT) { - if (sysport < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = sysport; - if (sysport > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = sysport; - /* - ** For a 16 port RTA, check the second bank of 8 ports - */ - if (RtaType == TYPE_RTA16) { - entry2 = HostP->Mapping[entry].ID2 - 1; - HostP->Mapping[entry2].Flags |= RTA_BOOTED | RTA_NEWBOOT; - sysport = HostP->Mapping[entry2].SysPort; - if (sysport < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = sysport; - if (sysport > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = sysport; - } - } - if (RtaType == TYPE_RTA16) - rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given IDs %d+%d\n", entry + 1, entry2 + 1); - else - rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given ID %d\n", entry + 1); - return 1; - } - } - - rio_dprintk(RIO_DEBUG_BOOT, "RTA not configured for this host\n"); - - if (Rup >= (unsigned short) MAX_RUP) { - /* - ** It was a host that did the booting - */ - MyType = "Host"; - MyName = HostP->Name; - } else { - /* - ** It was an RTA that did the booting - */ - MyType = "RTA"; - MyName = HostP->Mapping[Rup].Name; - } - MyLink = readb(&PktCmdP->LinkNum); - - /* - ** There is no SLOT_IN_USE entry for this RTA attached to the current - ** host card in the driver table. - ** - ** Check for a SLOT_TENTATIVE entry for this RTA attached to the - ** current host card in the driver table. - ** - ** If we find one, then we re-use that slot. - */ - for (entry = 0; entry < MAX_RUP; entry++) { - if ((HostP->Mapping[entry].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) { - if (RtaType == TYPE_RTA16) { - entry2 = HostP->Mapping[entry].ID2 - 1; - if ((HostP->Mapping[entry2].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry2].RtaUniqueNum == RtaUniq)) - rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slots (%d+%d)\n", entry, entry2); - else - continue; - } else - rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slot (%d)\n", entry); - if (!p->RIONoMessage) - printk("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A'); - return 1; - } - } - - /* - ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA - ** attached to the current host card in the driver table. - ** - ** Check if there is a SLOT_IN_USE or SLOT_TENTATIVE entry on another - ** host for this RTA in the driver table. - ** - ** For a SLOT_IN_USE entry on another host, we need to delete the RTA - ** entry from the other host and add it to this host (using some of - ** the functions from table.c which do this). - ** For a SLOT_TENTATIVE entry on another host, we must cope with the - ** following scenario: - ** - ** + Plug 8 port RTA into host A. (This creates SLOT_TENTATIVE entry - ** in table) - ** + Unplug RTA and plug into host B. (We now have 2 SLOT_TENTATIVE - ** entries) - ** + Configure RTA on host B. (This slot now becomes SLOT_IN_USE) - ** + Unplug RTA and plug back into host A. - ** + Configure RTA on host A. We now have the same RTA configured - ** with different ports on two different hosts. - */ - rio_dprintk(RIO_DEBUG_BOOT, "Have we seen RTA %x before?\n", RtaUniq); - found = 0; - Flag = 0; /* Convince the compiler this variable is initialized */ - for (host = 0; !found && (host < p->RIONumHosts); host++) { - for (rta = 0; rta < MAX_RUP; rta++) { - if ((p->RIOHosts[host].Mapping[rta].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (p->RIOHosts[host].Mapping[rta].RtaUniqueNum == RtaUniq)) { - Flag = p->RIOHosts[host].Mapping[rta].Flags; - MapP = &p->RIOHosts[host].Mapping[rta]; - if (RtaType == TYPE_RTA16) { - MapP2 = &p->RIOHosts[host].Mapping[MapP->ID2 - 1]; - rio_dprintk(RIO_DEBUG_BOOT, "This RTA is units %d+%d from host %s\n", rta + 1, MapP->ID2, p->RIOHosts[host].Name); - } else - rio_dprintk(RIO_DEBUG_BOOT, "This RTA is unit %d from host %s\n", rta + 1, p->RIOHosts[host].Name); - found = 1; - break; - } - } - } - - /* - ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA - ** attached to the current host card in the driver table. - ** - ** If we have not found a SLOT_IN_USE or SLOT_TENTATIVE entry on - ** another host for this RTA in the driver table... - ** - ** Check for a SLOT_IN_USE entry for this RTA in the config table. - */ - if (!MapP) { - rio_dprintk(RIO_DEBUG_BOOT, "Look for RTA %x in RIOSavedTable\n", RtaUniq); - for (rta = 0; rta < TOTAL_MAP_ENTRIES; rta++) { - rio_dprintk(RIO_DEBUG_BOOT, "Check table entry %d (%x)", rta, p->RIOSavedTable[rta].RtaUniqueNum); - - if ((p->RIOSavedTable[rta].Flags & SLOT_IN_USE) && (p->RIOSavedTable[rta].RtaUniqueNum == RtaUniq)) { - MapP = &p->RIOSavedTable[rta]; - Flag = p->RIOSavedTable[rta].Flags; - if (RtaType == TYPE_RTA16) { - for (entry2 = rta + 1; entry2 < TOTAL_MAP_ENTRIES; entry2++) { - if (p->RIOSavedTable[entry2].RtaUniqueNum == RtaUniq) - break; - } - MapP2 = &p->RIOSavedTable[entry2]; - rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entries %d+%d\n", rta, entry2); - } else - rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entry %d\n", rta); - break; - } - } - } - - /* - ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA - ** attached to the current host card in the driver table. - ** - ** We may have found a SLOT_IN_USE entry on another host for this - ** RTA in the config table, or a SLOT_IN_USE or SLOT_TENTATIVE entry - ** on another host for this RTA in the driver table. - ** - ** Check the driver table for room to fit this newly discovered RTA. - ** RIOFindFreeID() first looks for free slots and if it does not - ** find any free slots it will then attempt to oust any - ** tentative entry in the table. - */ - EmptySlot = 1; - if (RtaType == TYPE_RTA16) { - if (RIOFindFreeID(p, HostP, &entry, &entry2) == 0) { - RIODefaultName(p, HostP, entry); - rio_fill_host_slot(entry, entry2, RtaUniq, HostP); - EmptySlot = 0; - } - } else { - if (RIOFindFreeID(p, HostP, &entry, NULL) == 0) { - RIODefaultName(p, HostP, entry); - rio_fill_host_slot(entry, 0, RtaUniq, HostP); - EmptySlot = 0; - } - } - - /* - ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA - ** attached to the current host card in the driver table. - ** - ** If we found a SLOT_IN_USE entry on another host for this - ** RTA in the config or driver table, and there are enough free - ** slots in the driver table, then we need to move it over and - ** delete it from the other host. - ** If we found a SLOT_TENTATIVE entry on another host for this - ** RTA in the driver table, just delete the other host entry. - */ - if (EmptySlot == 0) { - if (MapP) { - if (Flag & SLOT_IN_USE) { - rio_dprintk(RIO_DEBUG_BOOT, "This RTA configured on another host - move entry to current host (1)\n"); - HostP->Mapping[entry].SysPort = MapP->SysPort; - memcpy(HostP->Mapping[entry].Name, MapP->Name, MAX_NAME_LEN); - HostP->Mapping[entry].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT; - RIOReMapPorts(p, HostP, &HostP->Mapping[entry]); - if (HostP->Mapping[entry].SysPort < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = HostP->Mapping[entry].SysPort; - if (HostP->Mapping[entry].SysPort > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = HostP->Mapping[entry].SysPort; - rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) MapP->SysPort, MapP->Name); - } else { - rio_dprintk(RIO_DEBUG_BOOT, "This RTA has a tentative entry on another host - delete that entry (1)\n"); - HostP->Mapping[entry].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT; - } - if (RtaType == TYPE_RTA16) { - if (Flag & SLOT_IN_USE) { - HostP->Mapping[entry2].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT; - HostP->Mapping[entry2].SysPort = MapP2->SysPort; - /* - ** Map second block of ttys for 16 port RTA - */ - RIOReMapPorts(p, HostP, &HostP->Mapping[entry2]); - if (HostP->Mapping[entry2].SysPort < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = HostP->Mapping[entry2].SysPort; - if (HostP->Mapping[entry2].SysPort > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = HostP->Mapping[entry2].SysPort; - rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) HostP->Mapping[entry2].SysPort, HostP->Mapping[entry].Name); - } else - HostP->Mapping[entry2].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT; - memset(MapP2, 0, sizeof(struct Map)); - } - memset(MapP, 0, sizeof(struct Map)); - if (!p->RIONoMessage) - printk("An orphaned RTA has been adopted by %s '%s' (%c).\n", MyType, MyName, MyLink + 'A'); - } else if (!p->RIONoMessage) - printk("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A'); - RIOSetChange(p); - return 1; - } - - /* - ** There is no room in the driver table to make an entry for the - ** booted RTA. Keep a note of its Uniq Num in the overflow table, - ** so we can ignore it's ID requests. - */ - if (!p->RIONoMessage) - printk("The RTA connected to %s '%s' (%c) cannot be configured. You cannot configure more than 128 ports to one host card.\n", MyType, MyName, MyLink + 'A'); - for (entry = 0; entry < HostP->NumExtraBooted; entry++) { - if (HostP->ExtraUnits[entry] == RtaUniq) { - /* - ** already got it! - */ - return 1; - } - } - /* - ** If there is room, add the unit to the list of extras - */ - if (HostP->NumExtraBooted < MAX_EXTRA_UNITS) - HostP->ExtraUnits[HostP->NumExtraBooted++] = RtaUniq; - return 1; -} - - -/* -** If the RTA or its host appears in the RIOBindTab[] structure then -** we mustn't boot the RTA and should return 0. -** This operation is slightly different from the other drivers for RIO -** in that this is designed to work with the new utilities -** not config.rio and is FAR SIMPLER. -** We no longer support the RIOBootMode variable. It is all done from the -** "boot/noboot" field in the rio.cf file. -*/ -int RIOBootOk(struct rio_info *p, struct Host *HostP, unsigned long RtaUniq) -{ - int Entry; - unsigned int HostUniq = HostP->UniqueNum; - - /* - ** Search bindings table for RTA or its parent. - ** If it exists, return 0, else 1. - */ - for (Entry = 0; (Entry < MAX_RTA_BINDINGS) && (p->RIOBindTab[Entry] != 0); Entry++) { - if ((p->RIOBindTab[Entry] == HostUniq) || (p->RIOBindTab[Entry] == RtaUniq)) - return 0; - } - return 1; -} - -/* -** Make an empty slot tentative. If this is a 16 port RTA, make both -** slots tentative, and the second one RTA_SECOND_SLOT as well. -*/ - -void rio_fill_host_slot(int entry, int entry2, unsigned int rta_uniq, struct Host *host) -{ - int link; - - rio_dprintk(RIO_DEBUG_BOOT, "rio_fill_host_slot(%d, %d, 0x%x...)\n", entry, entry2, rta_uniq); - - host->Mapping[entry].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE); - host->Mapping[entry].SysPort = NO_PORT; - host->Mapping[entry].RtaUniqueNum = rta_uniq; - host->Mapping[entry].HostUniqueNum = host->UniqueNum; - host->Mapping[entry].ID = entry + 1; - host->Mapping[entry].ID2 = 0; - if (entry2) { - host->Mapping[entry2].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE | RTA16_SECOND_SLOT); - host->Mapping[entry2].SysPort = NO_PORT; - host->Mapping[entry2].RtaUniqueNum = rta_uniq; - host->Mapping[entry2].HostUniqueNum = host->UniqueNum; - host->Mapping[entry2].Name[0] = '\0'; - host->Mapping[entry2].ID = entry2 + 1; - host->Mapping[entry2].ID2 = entry + 1; - host->Mapping[entry].ID2 = entry2 + 1; - } - /* - ** Must set these up, so that utilities show - ** topology of 16 port RTAs correctly - */ - for (link = 0; link < LINKS_PER_UNIT; link++) { - host->Mapping[entry].Topology[link].Unit = ROUTE_DISCONNECT; - host->Mapping[entry].Topology[link].Link = NO_LINK; - if (entry2) { - host->Mapping[entry2].Topology[link].Unit = ROUTE_DISCONNECT; - host->Mapping[entry2].Topology[link].Link = NO_LINK; - } - } -} diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c deleted file mode 100644 index f121357e5af0..000000000000 --- a/drivers/char/rio/riocmd.c +++ /dev/null @@ -1,939 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** ported from the existing SCO driver source -** - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riocmd.c -** SID : 1.2 -** Last Modified : 11/6/98 10:33:41 -** Retrieved : 11/6/98 10:33:49 -** -** ident @(#)riocmd.c 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" - - -static struct IdentifyRta IdRta; -static struct KillNeighbour KillUnit; - -int RIOFoadRta(struct Host *HostP, struct Map *MapP) -{ - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA\n"); - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = MapP->ID; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = IFOAD; - CmdBlkP->Packet.data[1] = 0; - CmdBlkP->Packet.data[2] = IFOAD_MAGIC & 0xFF; - CmdBlkP->Packet.data[3] = (IFOAD_MAGIC >> 8) & 0xFF; - - if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: Failed to queue foad command\n"); - return -EIO; - } - return 0; -} - -int RIOZombieRta(struct Host *HostP, struct Map *MapP) -{ - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA\n"); - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = MapP->ID; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = ZOMBIE; - CmdBlkP->Packet.data[1] = 0; - CmdBlkP->Packet.data[2] = ZOMBIE_MAGIC & 0xFF; - CmdBlkP->Packet.data[3] = (ZOMBIE_MAGIC >> 8) & 0xFF; - - if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: Failed to queue zombie command\n"); - return -EIO; - } - return 0; -} - -int RIOCommandRta(struct rio_info *p, unsigned long RtaUnique, int (*func) (struct Host * HostP, struct Map * MapP)) -{ - unsigned int Host; - - rio_dprintk(RIO_DEBUG_CMD, "Command RTA 0x%lx func %p\n", RtaUnique, func); - - if (!RtaUnique) - return (0); - - for (Host = 0; Host < p->RIONumHosts; Host++) { - unsigned int Rta; - struct Host *HostP = &p->RIOHosts[Host]; - - for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) { - struct Map *MapP = &HostP->Mapping[Rta]; - - if (MapP->RtaUniqueNum == RtaUnique) { - uint Link; - - /* - ** now, lets just check we have a route to it... - ** IF the routing stuff is working, then one of the - ** topology entries for this unit will have a legit - ** route *somewhere*. We care not where - if its got - ** any connections, we can get to it. - */ - for (Link = 0; Link < LINKS_PER_UNIT; Link++) { - if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) { - /* - ** Its worth trying the operation... - */ - return (*func) (HostP, MapP); - } - } - } - } - } - return -ENXIO; -} - - -int RIOIdentifyRta(struct rio_info *p, void __user * arg) -{ - unsigned int Host; - - if (copy_from_user(&IdRta, arg, sizeof(IdRta))) { - rio_dprintk(RIO_DEBUG_CMD, "RIO_IDENTIFY_RTA copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - - for (Host = 0; Host < p->RIONumHosts; Host++) { - unsigned int Rta; - struct Host *HostP = &p->RIOHosts[Host]; - - for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) { - struct Map *MapP = &HostP->Mapping[Rta]; - - if (MapP->RtaUniqueNum == IdRta.RtaUnique) { - uint Link; - /* - ** now, lets just check we have a route to it... - ** IF the routing stuff is working, then one of the - ** topology entries for this unit will have a legit - ** route *somewhere*. We care not where - if its got - ** any connections, we can get to it. - */ - for (Link = 0; Link < LINKS_PER_UNIT; Link++) { - if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) { - /* - ** Its worth trying the operation... - */ - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA\n"); - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = MapP->ID; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = IDENTIFY; - CmdBlkP->Packet.data[1] = 0; - CmdBlkP->Packet.data[2] = IdRta.ID; - - if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: Failed to queue command\n"); - return -EIO; - } - return 0; - } - } - } - } - } - return -ENOENT; -} - - -int RIOKillNeighbour(struct rio_info *p, void __user * arg) -{ - uint Host; - uint ID; - struct Host *HostP; - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "KILL HOST NEIGHBOUR\n"); - - if (copy_from_user(&KillUnit, arg, sizeof(KillUnit))) { - rio_dprintk(RIO_DEBUG_CMD, "RIO_KILL_NEIGHBOUR copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - - if (KillUnit.Link > 3) - return -ENXIO; - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "UFOAD: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = 0; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = UFOAD; - CmdBlkP->Packet.data[1] = KillUnit.Link; - CmdBlkP->Packet.data[2] = UFOAD_MAGIC & 0xFF; - CmdBlkP->Packet.data[3] = (UFOAD_MAGIC >> 8) & 0xFF; - - for (Host = 0; Host < p->RIONumHosts; Host++) { - ID = 0; - HostP = &p->RIOHosts[Host]; - - if (HostP->UniqueNum == KillUnit.UniqueNum) { - if (RIOQueueCmdBlk(HostP, RTAS_PER_HOST + KillUnit.Link, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n"); - return -EIO; - } - return 0; - } - - for (ID = 0; ID < RTAS_PER_HOST; ID++) { - if (HostP->Mapping[ID].RtaUniqueNum == KillUnit.UniqueNum) { - CmdBlkP->Packet.dest_unit = ID + 1; - if (RIOQueueCmdBlk(HostP, ID, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n"); - return -EIO; - } - return 0; - } - } - } - RIOFreeCmdBlk(CmdBlkP); - return -ENXIO; -} - -int RIOSuspendBootRta(struct Host *HostP, int ID, int Link) -{ - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA ID %d, link %c\n", ID, 'A' + Link); - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = ID; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = IWAIT; - CmdBlkP->Packet.data[1] = Link; - CmdBlkP->Packet.data[2] = IWAIT_MAGIC & 0xFF; - CmdBlkP->Packet.data[3] = (IWAIT_MAGIC >> 8) & 0xFF; - - if (RIOQueueCmdBlk(HostP, ID - 1, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: Failed to queue iwait command\n"); - return -EIO; - } - return 0; -} - -int RIOFoadWakeup(struct rio_info *p) -{ - int port; - struct Port *PortP; - unsigned long flags; - - for (port = 0; port < RIO_PORTS; port++) { - PortP = p->RIOPortp[port]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->Config = 0; - PortP->State = 0; - PortP->InUse = NOT_INUSE; - PortP->PortState = 0; - PortP->FlushCmdBodge = 0; - PortP->ModemLines = 0; - PortP->ModemState = 0; - PortP->CookMode = 0; - PortP->ParamSem = 0; - PortP->Mapped = 0; - PortP->WflushFlag = 0; - PortP->MagicFlags = 0; - PortP->RxDataStart = 0; - PortP->TxBufferIn = 0; - PortP->TxBufferOut = 0; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - return (0); -} - -/* -** Incoming command on the COMMAND_RUP to be processed. -*/ -static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struct PKT __iomem *PacketP) -{ - struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *)PacketP->data; - struct Port *PortP; - struct UnixRup *UnixRupP; - unsigned short SysPort; - unsigned short ReportedModemStatus; - unsigned short rup; - unsigned short subCommand; - unsigned long flags; - - func_enter(); - - /* - ** 16 port RTA note: - ** Command rup packets coming from the RTA will have pkt->data[1] (which - ** translates to PktCmdP->PhbNum) set to the host port number for the - ** particular unit. To access the correct BaseSysPort for a 16 port RTA, - ** we can use PhbNum to get the rup number for the appropriate 8 port - ** block (for the first block, this should be equal to 'Rup'). - */ - rup = readb(&PktCmdP->PhbNum) / (unsigned short) PORTS_PER_RTA; - UnixRupP = &HostP->UnixRups[rup]; - SysPort = UnixRupP->BaseSysPort + (readb(&PktCmdP->PhbNum) % (unsigned short) PORTS_PER_RTA); - rio_dprintk(RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort); - - if (UnixRupP->BaseSysPort == NO_PORT) { - rio_dprintk(RIO_DEBUG_CMD, "OBSCURE ERROR!\n"); - rio_dprintk(RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n"); - rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Host number %Zd, name ``%s''\n", HostP - p->RIOHosts, HostP->Name); - rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Rup number 0x%x\n", rup); - - if (Rup < (unsigned short) MAX_RUP) { - rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for RTA ``%s''\n", HostP->Mapping[Rup].Name); - } else - rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for link ``%c'' of host ``%s''\n", ('A' + Rup - MAX_RUP), HostP->Name); - - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Destination 0x%x:0x%x\n", readb(&PacketP->dest_unit), readb(&PacketP->dest_port)); - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Source 0x%x:0x%x\n", readb(&PacketP->src_unit), readb(&PacketP->src_port)); - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Length 0x%x (%d)\n", readb(&PacketP->len), readb(&PacketP->len)); - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Control 0x%x (%d)\n", readb(&PacketP->control), readb(&PacketP->control)); - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Check 0x%x (%d)\n", readw(&PacketP->csum), readw(&PacketP->csum)); - rio_dprintk(RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, " "Command Code 0x%x\n", readb(&PktCmdP->PhbNum), readb(&PktCmdP->Command)); - return 1; - } - PortP = p->RIOPortp[SysPort]; - rio_spin_lock_irqsave(&PortP->portSem, flags); - switch (readb(&PktCmdP->Command)) { - case RIOC_BREAK_RECEIVED: - rio_dprintk(RIO_DEBUG_CMD, "Received a break!\n"); - /* If the current line disc. is not multi-threading and - the current processor is not the default, reset rup_intr - and return 0 to ensure that the command packet is - not freed. */ - /* Call tmgr HANGUP HERE */ - /* Fix this later when every thing works !!!! RAMRAJ */ - gs_got_break(&PortP->gs); - break; - - case RIOC_COMPLETE: - rio_dprintk(RIO_DEBUG_CMD, "Command complete on phb %d host %Zd\n", readb(&PktCmdP->PhbNum), HostP - p->RIOHosts); - subCommand = 1; - switch (readb(&PktCmdP->SubCommand)) { - case RIOC_MEMDUMP: - rio_dprintk(RIO_DEBUG_CMD, "Memory dump cmd (0x%x) from addr 0x%x\n", readb(&PktCmdP->SubCommand), readw(&PktCmdP->SubAddr)); - break; - case RIOC_READ_REGISTER: - rio_dprintk(RIO_DEBUG_CMD, "Read register (0x%x)\n", readw(&PktCmdP->SubAddr)); - p->CdRegister = (readb(&PktCmdP->ModemStatus) & RIOC_MSVR1_HOST); - break; - default: - subCommand = 0; - break; - } - if (subCommand) - break; - rio_dprintk(RIO_DEBUG_CMD, "New status is 0x%x was 0x%x\n", readb(&PktCmdP->PortStatus), PortP->PortState); - if (PortP->PortState != readb(&PktCmdP->PortStatus)) { - rio_dprintk(RIO_DEBUG_CMD, "Mark status & wakeup\n"); - PortP->PortState = readb(&PktCmdP->PortStatus); - /* What should we do here ... - wakeup( &PortP->PortState ); - */ - } else - rio_dprintk(RIO_DEBUG_CMD, "No change\n"); - - /* FALLTHROUGH */ - case RIOC_MODEM_STATUS: - /* - ** Knock out the tbusy and tstop bits, as these are not relevant - ** to the check for modem status change (they're just there because - ** it's a convenient place to put them!). - */ - ReportedModemStatus = readb(&PktCmdP->ModemStatus); - if ((PortP->ModemState & RIOC_MSVR1_HOST) == - (ReportedModemStatus & RIOC_MSVR1_HOST)) { - rio_dprintk(RIO_DEBUG_CMD, "Modem status unchanged 0x%x\n", PortP->ModemState); - /* - ** Update ModemState just in case tbusy or tstop states have - ** changed. - */ - PortP->ModemState = ReportedModemStatus; - } else { - rio_dprintk(RIO_DEBUG_CMD, "Modem status change from 0x%x to 0x%x\n", PortP->ModemState, ReportedModemStatus); - PortP->ModemState = ReportedModemStatus; -#ifdef MODEM_SUPPORT - if (PortP->Mapped) { - /***********************************************************\ - ************************************************************* - *** *** - *** M O D E M S T A T E C H A N G E *** - *** *** - ************************************************************* - \***********************************************************/ - /* - ** If the device is a modem, then check the modem - ** carrier. - */ - if (PortP->gs.port.tty == NULL) - break; - if (PortP->gs.port.tty->termios == NULL) - break; - - if (!(PortP->gs.port.tty->termios->c_cflag & CLOCAL) && ((PortP->State & (RIO_MOPEN | RIO_WOPEN)))) { - - rio_dprintk(RIO_DEBUG_CMD, "Is there a Carrier?\n"); - /* - ** Is there a carrier? - */ - if (PortP->ModemState & RIOC_MSVR1_CD) { - /* - ** Has carrier just appeared? - */ - if (!(PortP->State & RIO_CARR_ON)) { - rio_dprintk(RIO_DEBUG_CMD, "Carrier just came up.\n"); - PortP->State |= RIO_CARR_ON; - /* - ** wakeup anyone in WOPEN - */ - if (PortP->State & (PORT_ISOPEN | RIO_WOPEN)) - wake_up_interruptible(&PortP->gs.port.open_wait); - } - } else { - /* - ** Has carrier just dropped? - */ - if (PortP->State & RIO_CARR_ON) { - if (PortP->State & (PORT_ISOPEN | RIO_WOPEN | RIO_MOPEN)) - tty_hangup(PortP->gs.port.tty); - PortP->State &= ~RIO_CARR_ON; - rio_dprintk(RIO_DEBUG_CMD, "Carrirer just went down\n"); - } - } - } - } -#endif - } - break; - - default: - rio_dprintk(RIO_DEBUG_CMD, "Unknown command %d on CMD_RUP of host %Zd\n", readb(&PktCmdP->Command), HostP - p->RIOHosts); - break; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - func_exit(); - - return 1; -} - -/* -** The command mechanism: -** Each rup has a chain of commands associated with it. -** This chain is maintained by routines in this file. -** Periodically we are called and we run a quick check of all the -** active chains to determine if there is a command to be executed, -** and if the rup is ready to accept it. -** -*/ - -/* -** Allocate an empty command block. -*/ -struct CmdBlk *RIOGetCmdBlk(void) -{ - struct CmdBlk *CmdBlkP; - - CmdBlkP = kzalloc(sizeof(struct CmdBlk), GFP_ATOMIC); - return CmdBlkP; -} - -/* -** Return a block to the head of the free list. -*/ -void RIOFreeCmdBlk(struct CmdBlk *CmdBlkP) -{ - kfree(CmdBlkP); -} - -/* -** attach a command block to the list of commands to be performed for -** a given rup. -*/ -int RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP) -{ - struct CmdBlk **Base; - struct UnixRup *UnixRupP; - unsigned long flags; - - if (Rup >= (unsigned short) (MAX_RUP + LINKS_PER_UNIT)) { - rio_dprintk(RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n", Rup); - RIOFreeCmdBlk(CmdBlkP); - return RIO_FAIL; - } - - UnixRupP = &HostP->UnixRups[Rup]; - - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - - /* - ** If the RUP is currently inactive, then put the request - ** straight on the RUP.... - */ - if ((UnixRupP->CmdsWaitingP == NULL) && (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE) && (CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) - : 1)) { - rio_dprintk(RIO_DEBUG_CMD, "RUP inactive-placing command straight on. Cmd byte is 0x%x\n", CmdBlkP->Packet.data[0]); - - /* - ** Whammy! blat that pack! - */ - HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT)); - - /* - ** place command packet on the pending position. - */ - UnixRupP->CmdPendingP = CmdBlkP; - - /* - ** set the command register - */ - writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol); - - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - - return 0; - } - rio_dprintk(RIO_DEBUG_CMD, "RUP active - en-queing\n"); - - if (UnixRupP->CmdsWaitingP != NULL) - rio_dprintk(RIO_DEBUG_CMD, "Rup active - command waiting\n"); - if (UnixRupP->CmdPendingP != NULL) - rio_dprintk(RIO_DEBUG_CMD, "Rup active - command pending\n"); - if (readw(&UnixRupP->RupP->txcontrol) != TX_RUP_INACTIVE) - rio_dprintk(RIO_DEBUG_CMD, "Rup active - command rup not ready\n"); - - Base = &UnixRupP->CmdsWaitingP; - - rio_dprintk(RIO_DEBUG_CMD, "First try to queue cmdblk %p at %p\n", CmdBlkP, Base); - - while (*Base) { - rio_dprintk(RIO_DEBUG_CMD, "Command cmdblk %p here\n", *Base); - Base = &((*Base)->NextP); - rio_dprintk(RIO_DEBUG_CMD, "Now try to queue cmd cmdblk %p at %p\n", CmdBlkP, Base); - } - - rio_dprintk(RIO_DEBUG_CMD, "Will queue cmdblk %p at %p\n", CmdBlkP, Base); - - *Base = CmdBlkP; - - CmdBlkP->NextP = NULL; - - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - - return 0; -} - -/* -** Here we go - if there is an empty rup, fill it! -** must be called at splrio() or higher. -*/ -void RIOPollHostCommands(struct rio_info *p, struct Host *HostP) -{ - struct CmdBlk *CmdBlkP; - struct UnixRup *UnixRupP; - struct PKT __iomem *PacketP; - unsigned short Rup; - unsigned long flags; - - - Rup = MAX_RUP + LINKS_PER_UNIT; - - do { /* do this loop for each RUP */ - /* - ** locate the rup we are processing & lock it - */ - UnixRupP = &HostP->UnixRups[--Rup]; - - spin_lock_irqsave(&UnixRupP->RupLock, flags); - - /* - ** First check for incoming commands: - */ - if (readw(&UnixRupP->RupP->rxcontrol) != RX_RUP_INACTIVE) { - int FreeMe; - - PacketP = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->rxpkt)); - - switch (readb(&PacketP->dest_port)) { - case BOOT_RUP: - rio_dprintk(RIO_DEBUG_CMD, "Incoming Boot %s packet '%x'\n", readb(&PacketP->len) & 0x80 ? "Command" : "Data", readb(&PacketP->data[0])); - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - FreeMe = RIOBootRup(p, Rup, HostP, PacketP); - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - break; - - case COMMAND_RUP: - /* - ** Free the RUP lock as loss of carrier causes a - ** ttyflush which will (eventually) call another - ** routine that uses the RUP lock. - */ - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - FreeMe = RIOCommandRup(p, Rup, HostP, PacketP); - if (readb(&PacketP->data[5]) == RIOC_MEMDUMP) { - rio_dprintk(RIO_DEBUG_CMD, "Memdump from 0x%x complete\n", readw(&(PacketP->data[6]))); - rio_memcpy_fromio(p->RIOMemDump, &(PacketP->data[8]), 32); - } - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - break; - - case ROUTE_RUP: - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - FreeMe = RIORouteRup(p, Rup, HostP, PacketP); - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - break; - - default: - rio_dprintk(RIO_DEBUG_CMD, "Unknown RUP %d\n", readb(&PacketP->dest_port)); - FreeMe = 1; - break; - } - - if (FreeMe) { - rio_dprintk(RIO_DEBUG_CMD, "Free processed incoming command packet\n"); - put_free_end(HostP, PacketP); - - writew(RX_RUP_INACTIVE, &UnixRupP->RupP->rxcontrol); - - if (readw(&UnixRupP->RupP->handshake) == PHB_HANDSHAKE_SET) { - rio_dprintk(RIO_DEBUG_CMD, "Handshake rup %d\n", Rup); - writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &UnixRupP->RupP->handshake); - } - } - } - - /* - ** IF a command was running on the port, - ** and it has completed, then tidy it up. - */ - if ((CmdBlkP = UnixRupP->CmdPendingP) && /* ASSIGN! */ - (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) { - /* - ** we are idle. - ** there is a command in pending. - ** Therefore, this command has finished. - ** So, wakeup whoever is waiting for it (and tell them - ** what happened). - */ - if (CmdBlkP->Packet.dest_port == BOOT_RUP) - rio_dprintk(RIO_DEBUG_CMD, "Free Boot %s Command Block '%x'\n", CmdBlkP->Packet.len & 0x80 ? "Command" : "Data", CmdBlkP->Packet.data[0]); - - rio_dprintk(RIO_DEBUG_CMD, "Command %p completed\n", CmdBlkP); - - /* - ** Clear the Rup lock to prevent mutual exclusion. - */ - if (CmdBlkP->PostFuncP) { - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - (*CmdBlkP->PostFuncP) (CmdBlkP->PostArg, CmdBlkP); - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - } - - /* - ** ....clear the pending flag.... - */ - UnixRupP->CmdPendingP = NULL; - - /* - ** ....and return the command block to the freelist. - */ - RIOFreeCmdBlk(CmdBlkP); - } - - /* - ** If there is a command for this rup, and the rup - ** is idle, then process the command - */ - if ((CmdBlkP = UnixRupP->CmdsWaitingP) && /* ASSIGN! */ - (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) { - /* - ** if the pre-function is non-zero, call it. - ** If it returns RIO_FAIL then don't - ** send this command yet! - */ - if (!(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) : 1)) { - rio_dprintk(RIO_DEBUG_CMD, "Not ready to start command %p\n", CmdBlkP); - } else { - rio_dprintk(RIO_DEBUG_CMD, "Start new command %p Cmd byte is 0x%x\n", CmdBlkP, CmdBlkP->Packet.data[0]); - /* - ** Whammy! blat that pack! - */ - HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT)); - - /* - ** remove the command from the rup command queue... - */ - UnixRupP->CmdsWaitingP = CmdBlkP->NextP; - - /* - ** ...and place it on the pending position. - */ - UnixRupP->CmdPendingP = CmdBlkP; - - /* - ** set the command register - */ - writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol); - - /* - ** the command block will be freed - ** when the command has been processed. - */ - } - } - spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - } while (Rup); -} - -int RIOWFlushMark(unsigned long iPortP, struct CmdBlk *CmdBlkP) -{ - struct Port *PortP = (struct Port *) iPortP; - unsigned long flags; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->WflushFlag++; - PortP->MagicFlags |= MAGIC_FLUSH; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return RIOUnUse(iPortP, CmdBlkP); -} - -int RIORFlushEnable(unsigned long iPortP, struct CmdBlk *CmdBlkP) -{ - struct Port *PortP = (struct Port *) iPortP; - struct PKT __iomem *PacketP; - unsigned long flags; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - while (can_remove_receive(&PacketP, PortP)) { - remove_receive(PortP); - put_free_end(PortP->HostP, PacketP); - } - - if (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET) { - /* - ** MAGIC! (Basically, handshake the RX buffer, so that - ** the RTAs upstream can be re-enabled.) - */ - rio_dprintk(RIO_DEBUG_CMD, "Util: Set RX handshake bit\n"); - writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake); - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return RIOUnUse(iPortP, CmdBlkP); -} - -int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP) -{ - struct Port *PortP = (struct Port *) iPortP; - unsigned long flags; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - rio_dprintk(RIO_DEBUG_CMD, "Decrement in use count for port\n"); - - if (PortP->InUse) { - if (--PortP->InUse != NOT_INUSE) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - } - } - /* - ** While PortP->InUse is set (i.e. a preemptive command has been sent to - ** the RTA and is awaiting completion), any transmit data is prevented from - ** being transferred from the write queue into the transmit packets - ** (add_transmit) and no furthur transmit interrupt will be sent for that - ** data. The next interrupt will occur up to 500ms later (RIOIntr is called - ** twice a second as a saftey measure). This was the case when kermit was - ** used to send data into a RIO port. After each packet was sent, TCFLSH - ** was called to flush the read queue preemptively. PortP->InUse was - ** incremented, thereby blocking the 6 byte acknowledgement packet - ** transmitted back. This acknowledgment hung around for 500ms before - ** being sent, thus reducing input performance substantially!. - ** When PortP->InUse becomes NOT_INUSE, we must ensure that any data - ** hanging around in the transmit buffer is sent immediately. - */ - writew(1, &PortP->HostP->ParmMapP->tx_intr); - /* What to do here .. - wakeup( (caddr_t)&(PortP->InUse) ); - */ - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; -} - -/* -** -** How to use this file: -** -** To send a command down a rup, you need to allocate a command block, fill -** in the packet information, fill in the command number, fill in the pre- -** and post- functions and arguments, and then add the command block to the -** queue of command blocks for the port in question. When the port is idle, -** then the pre-function will be called. If this returns RIO_FAIL then the -** command will be re-queued and tried again at a later date (probably in one -** clock tick). If the pre-function returns NOT RIO_FAIL, then the command -** packet will be queued on the RUP, and the txcontrol field set to the -** command number. When the txcontrol field has changed from being the -** command number, then the post-function will be called, with the argument -** specified earlier, a pointer to the command block, and the value of -** txcontrol. -** -** To allocate a command block, call RIOGetCmdBlk(). This returns a pointer -** to the command block structure allocated, or NULL if there aren't any. -** The block will have been zeroed for you. -** -** The structure has the following fields: -** -** struct CmdBlk -** { -** struct CmdBlk *NextP; ** Pointer to next command block ** -** struct PKT Packet; ** A packet, to copy to the rup ** -** int (*PreFuncP)(); ** The func to call to check if OK ** -** int PreArg; ** The arg for the func ** -** int (*PostFuncP)(); ** The func to call when completed ** -** int PostArg; ** The arg for the func ** -** }; -** -** You need to fill in ALL fields EXCEPT NextP, which is used to link the -** blocks together either on the free list or on the Rup list. -** -** Packet is an actual packet structure to be filled in with the packet -** information associated with the command. You need to fill in everything, -** as the command processor doesn't process the command packet in any way. -** -** The PreFuncP is called before the packet is enqueued on the host rup. -** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must -** return !RIO_FAIL to have the packet queued on the rup, and RIO_FAIL -** if the packet is NOT to be queued. -** -** The PostFuncP is called when the command has completed. It is called -** as (*PostFuncP)(PostArg, CmdBlkP, txcontrol);. PostFuncP is not expected -** to return a value. PostFuncP does NOT need to free the command block, -** as this happens automatically after PostFuncP returns. -** -** Once the command block has been filled in, it is attached to the correct -** queue by calling RIOQueueCmdBlk( HostP, Rup, CmdBlkP ) where HostP is -** a pointer to the struct Host, Rup is the NUMBER of the rup (NOT a pointer -** to it!), and CmdBlkP is the pointer to the command block allocated using -** RIOGetCmdBlk(). -** -*/ diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c deleted file mode 100644 index 780506326a73..000000000000 --- a/drivers/char/rio/rioctrl.c +++ /dev/null @@ -1,1504 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioctrl.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:42 -** Retrieved : 11/6/98 10:33:49 -** -** ident @(#)rioctrl.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" - - -static struct LpbReq LpbReq; -static struct RupReq RupReq; -static struct PortReq PortReq; -static struct HostReq HostReq; /* oh really? global? and no locking? */ -static struct HostDpRam HostDpRam; -static struct DebugCtrl DebugCtrl; -static struct Map MapEnt; -static struct PortSetup PortSetup; -static struct DownLoad DownLoad; -static struct SendPack SendPack; -/* static struct StreamInfo StreamInfo; */ -/* static char modemtable[RIO_PORTS]; */ -static struct SpecialRupCmd SpecialRupCmd; -static struct PortParams PortParams; -static struct portStats portStats; - -static struct SubCmdStruct { - ushort Host; - ushort Rup; - ushort Port; - ushort Addr; -} SubCmd; - -struct PortTty { - uint port; - struct ttystatics Tty; -}; - -static struct PortTty PortTty; -typedef struct ttystatics TERMIO; - -/* -** This table is used when the config.rio downloads bin code to the -** driver. We index the table using the product code, 0-F, and call -** the function pointed to by the entry, passing the information -** about the boot. -** The RIOBootCodeUNKNOWN entry is there to politely tell the calling -** process to bog off. -*/ -static int - (*RIOBootTable[MAX_PRODUCT]) (struct rio_info *, struct DownLoad *) = { - /* 0 */ RIOBootCodeHOST, - /* Host Card */ - /* 1 */ RIOBootCodeRTA, - /* RTA */ -}; - -#define drv_makedev(maj, min) ((((uint) maj & 0xff) << 8) | ((uint) min & 0xff)) - -static int copy_from_io(void __user *to, void __iomem *from, size_t size) -{ - void *buf = kmalloc(size, GFP_KERNEL); - int res = -ENOMEM; - if (buf) { - rio_memcpy_fromio(buf, from, size); - res = copy_to_user(to, buf, size); - kfree(buf); - } - return res; -} - -int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su) -{ - uint Host; /* leave me unsigned! */ - uint port; /* and me! */ - struct Host *HostP; - ushort loop; - int Entry; - struct Port *PortP; - struct PKT __iomem *PacketP; - int retval = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; - - func_enter(); - - /* Confuse the compiler to think that we've initialized these */ - Host = 0; - PortP = NULL; - - rio_dprintk(RIO_DEBUG_CTRL, "control ioctl cmd: 0x%x arg: %p\n", cmd, argp); - - switch (cmd) { - /* - ** RIO_SET_TIMER - ** - ** Change the value of the host card interrupt timer. - ** If the host card number is -1 then all host cards are changed - ** otherwise just the specified host card will be changed. - */ - case RIO_SET_TIMER: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_TIMER to %ldms\n", arg); - { - int host, value; - host = (arg >> 16) & 0x0000FFFF; - value = arg & 0x0000ffff; - if (host == -1) { - for (host = 0; host < p->RIONumHosts; host++) { - if (p->RIOHosts[host].Flags == RC_RUNNING) { - writew(value, &p->RIOHosts[host].ParmMapP->timer); - } - } - } else if (host >= p->RIONumHosts) { - return -EINVAL; - } else { - if (p->RIOHosts[host].Flags == RC_RUNNING) { - writew(value, &p->RIOHosts[host].ParmMapP->timer); - } - } - } - return 0; - - case RIO_FOAD_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_FOAD_RTA\n"); - return RIOCommandRta(p, arg, RIOFoadRta); - - case RIO_ZOMBIE_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_ZOMBIE_RTA\n"); - return RIOCommandRta(p, arg, RIOZombieRta); - - case RIO_IDENTIFY_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_IDENTIFY_RTA\n"); - return RIOIdentifyRta(p, argp); - - case RIO_KILL_NEIGHBOUR: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_KILL_NEIGHBOUR\n"); - return RIOKillNeighbour(p, argp); - - case SPECIAL_RUP_CMD: - { - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD\n"); - if (copy_from_user(&SpecialRupCmd, argp, sizeof(SpecialRupCmd))) { - rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - CmdBlkP = RIOGetCmdBlk(); - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD GetCmdBlk failed\n"); - return -ENXIO; - } - CmdBlkP->Packet = SpecialRupCmd.Packet; - if (SpecialRupCmd.Host >= p->RIONumHosts) - SpecialRupCmd.Host = 0; - rio_dprintk(RIO_DEBUG_CTRL, "Queue special rup command for host %d rup %d\n", SpecialRupCmd.Host, SpecialRupCmd.RupNum); - if (RIOQueueCmdBlk(&p->RIOHosts[SpecialRupCmd.Host], SpecialRupCmd.RupNum, CmdBlkP) == RIO_FAIL) { - printk(KERN_WARNING "rio: FAILED TO QUEUE SPECIAL RUP COMMAND\n"); - } - return 0; - } - - case RIO_DEBUG_MEM: - return -EPERM; - - case RIO_ALL_MODEM: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_ALL_MODEM\n"); - p->RIOError.Error = IOCTL_COMMAND_UNKNOWN; - return -EINVAL; - - case RIO_GET_TABLE: - /* - ** Read the routing table from the device driver to user space - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_TABLE\n"); - - if ((retval = RIOApel(p)) != 0) - return retval; - - if (copy_to_user(argp, p->RIOConnectTable, TOTAL_MAP_ENTRIES * sizeof(struct Map))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_TABLE copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - - { - int entry; - rio_dprintk(RIO_DEBUG_CTRL, "*****\nMAP ENTRIES\n"); - for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { - if ((p->RIOConnectTable[entry].ID == 0) && (p->RIOConnectTable[entry].HostUniqueNum == 0) && (p->RIOConnectTable[entry].RtaUniqueNum == 0)) - continue; - - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.HostUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].HostUniqueNum); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.RtaUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].RtaUniqueNum); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.ID = 0x%x\n", entry, p->RIOConnectTable[entry].ID); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.ID2 = 0x%x\n", entry, p->RIOConnectTable[entry].ID2); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Flags = 0x%x\n", entry, (int) p->RIOConnectTable[entry].Flags); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.SysPort = 0x%x\n", entry, (int) p->RIOConnectTable[entry].SysPort); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[0].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[0].Unit); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[0].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[0].Link); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[1].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[1].Unit); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[1].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[1].Link); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[2].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[2].Unit); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[2].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[2].Link); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[3].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[3].Unit); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[4].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[3].Link); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Name = %s\n", entry, p->RIOConnectTable[entry].Name); - } - rio_dprintk(RIO_DEBUG_CTRL, "*****\nEND MAP ENTRIES\n"); - } - p->RIOQuickCheck = NOT_CHANGED; /* a table has been gotten */ - return 0; - - case RIO_PUT_TABLE: - /* - ** Write the routing table to the device driver from user space - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE\n"); - - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&p->RIOConnectTable[0], argp, TOTAL_MAP_ENTRIES * sizeof(struct Map))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } -/* -*********************************** - { - int entry; - rio_dprint(RIO_DEBUG_CTRL, ("*****\nMAP ENTRIES\n") ); - for ( entry=0; entryRIOConnectTable[entry].HostUniqueNum ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.RtaUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].RtaUniqueNum ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.ID = 0x%x\n", entry, p->RIOConnectTable[entry].ID ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.ID2 = 0x%x\n", entry, p->RIOConnectTable[entry].ID2 ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Flags = 0x%x\n", entry, p->RIOConnectTable[entry].Flags ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.SysPort = 0x%x\n", entry, p->RIOConnectTable[entry].SysPort ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[0].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[0].Unit ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[0].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[0].Link ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[1].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[1].Unit ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[1].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[1].Link ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[2].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[2].Unit ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[2].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[2].Link ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[3].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[3].Unit ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[4].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[3].Link ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Name = %s\n", entry, p->RIOConnectTable[entry].Name ) ); - } - rio_dprint(RIO_DEBUG_CTRL, ("*****\nEND MAP ENTRIES\n") ); - } -*********************************** -*/ - return RIONewTable(p); - - case RIO_GET_BINDINGS: - /* - ** Send bindings table, containing unique numbers of RTAs owned - ** by this system to user space - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS\n"); - - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_to_user(argp, p->RIOBindTab, (sizeof(ulong) * MAX_RTA_BINDINGS))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_PUT_BINDINGS: - /* - ** Receive a bindings table, containing unique numbers of RTAs owned - ** by this system - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS\n"); - - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&p->RIOBindTab[0], argp, (sizeof(ulong) * MAX_RTA_BINDINGS))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - return 0; - - case RIO_BIND_RTA: - { - int EmptySlot = -1; - /* - ** Bind this RTA to host, so that it will be booted by - ** host in 'boot owned RTAs' mode. - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_BIND_RTA\n"); - - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_BIND_RTA !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - for (Entry = 0; Entry < MAX_RTA_BINDINGS; Entry++) { - if ((EmptySlot == -1) && (p->RIOBindTab[Entry] == 0L)) - EmptySlot = Entry; - else if (p->RIOBindTab[Entry] == arg) { - /* - ** Already exists - delete - */ - p->RIOBindTab[Entry] = 0L; - rio_dprintk(RIO_DEBUG_CTRL, "Removing Rta %ld from p->RIOBindTab\n", arg); - return 0; - } - } - /* - ** Dosen't exist - add - */ - if (EmptySlot != -1) { - p->RIOBindTab[EmptySlot] = arg; - rio_dprintk(RIO_DEBUG_CTRL, "Adding Rta %lx to p->RIOBindTab\n", arg); - } else { - rio_dprintk(RIO_DEBUG_CTRL, "p->RIOBindTab full! - Rta %lx not added\n", arg); - return -ENOMEM; - } - return 0; - } - - case RIO_RESUME: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME\n"); - port = arg; - if ((port < 0) || (port > 511)) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Bad port number %d\n", port); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - PortP = p->RIOPortp[port]; - if (!PortP->Mapped) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d not mapped\n", port); - p->RIOError.Error = PORT_NOT_MAPPED_INTO_SYSTEM; - return -EINVAL; - } - if (!(PortP->State & (RIO_LOPEN | RIO_MOPEN))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d not open\n", port); - return -EINVAL; - } - - rio_spin_lock_irqsave(&PortP->portSem, flags); - if (RIOPreemptiveCmd(p, (p->RIOPortp[port]), RIOC_RESUME) == - RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME failed\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EBUSY; - } else { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d resumed\n", port); - PortP->State |= RIO_BUSY; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_ASSIGN_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_ASSIGN_RTA\n"); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_ASSIGN_RTA !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { - rio_dprintk(RIO_DEBUG_CTRL, "Copy from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - return RIOAssignRta(p, &MapEnt); - - case RIO_CHANGE_NAME: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_CHANGE_NAME\n"); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_CHANGE_NAME !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { - rio_dprintk(RIO_DEBUG_CTRL, "Copy from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - return RIOChangeName(p, &MapEnt); - - case RIO_DELETE_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DELETE_RTA\n"); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DELETE_RTA !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { - rio_dprintk(RIO_DEBUG_CTRL, "Copy from data space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - return RIODeleteRta(p, &MapEnt); - - case RIO_QUICK_CHECK: - if (copy_to_user(argp, &p->RIORtaDisCons, sizeof(unsigned int))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_LAST_ERROR: - if (copy_to_user(argp, &p->RIOError, sizeof(struct Error))) - return -EFAULT; - return 0; - - case RIO_GET_LOG: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_LOG\n"); - return -EINVAL; - - case RIO_GET_MODTYPE: - if (copy_from_user(&port, argp, sizeof(unsigned int))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "Get module type for port %d\n", port); - if (port < 0 || port > 511) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_MODTYPE: Bad port number %d\n", port); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - PortP = (p->RIOPortp[port]); - if (!PortP->Mapped) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_MODTYPE: Port %d not mapped\n", port); - p->RIOError.Error = PORT_NOT_MAPPED_INTO_SYSTEM; - return -EINVAL; - } - /* - ** Return module type of port - */ - port = PortP->HostP->UnixRups[PortP->RupNum].ModTypes; - if (copy_to_user(argp, &port, sizeof(unsigned int))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return (0); - case RIO_BLOCK_OPENS: - rio_dprintk(RIO_DEBUG_CTRL, "Opens block until booted\n"); - for (Entry = 0; Entry < RIO_PORTS; Entry++) { - rio_spin_lock_irqsave(&PortP->portSem, flags); - p->RIOPortp[Entry]->WaitUntilBooted = 1; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - return 0; - - case RIO_SETUP_PORTS: - rio_dprintk(RIO_DEBUG_CTRL, "Setup ports\n"); - if (copy_from_user(&PortSetup, argp, sizeof(PortSetup))) { - p->RIOError.Error = COPYIN_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "EFAULT"); - return -EFAULT; - } - if (PortSetup.From > PortSetup.To || PortSetup.To >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - rio_dprintk(RIO_DEBUG_CTRL, "ENXIO"); - return -ENXIO; - } - if (PortSetup.XpCps > p->RIOConf.MaxXpCps || PortSetup.XpCps < p->RIOConf.MinXpCps) { - p->RIOError.Error = XPRINT_CPS_OUT_OF_RANGE; - rio_dprintk(RIO_DEBUG_CTRL, "EINVAL"); - return -EINVAL; - } - if (!p->RIOPortp) { - printk(KERN_ERR "rio: No p->RIOPortp array!\n"); - rio_dprintk(RIO_DEBUG_CTRL, "No p->RIOPortp array!\n"); - return -EIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "entering loop (%d %d)!\n", PortSetup.From, PortSetup.To); - for (loop = PortSetup.From; loop <= PortSetup.To; loop++) { - rio_dprintk(RIO_DEBUG_CTRL, "in loop (%d)!\n", loop); - } - rio_dprintk(RIO_DEBUG_CTRL, "after loop (%d)!\n", loop); - rio_dprintk(RIO_DEBUG_CTRL, "Retval:%x\n", retval); - return retval; - - case RIO_GET_PORT_SETUP: - rio_dprintk(RIO_DEBUG_CTRL, "Get port setup\n"); - if (copy_from_user(&PortSetup, argp, sizeof(PortSetup))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (PortSetup.From >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - - port = PortSetup.To = PortSetup.From; - PortSetup.IxAny = (p->RIOPortp[port]->Config & RIO_IXANY) ? 1 : 0; - PortSetup.IxOn = (p->RIOPortp[port]->Config & RIO_IXON) ? 1 : 0; - PortSetup.Drain = (p->RIOPortp[port]->Config & RIO_WAITDRAIN) ? 1 : 0; - PortSetup.Store = p->RIOPortp[port]->Store; - PortSetup.Lock = p->RIOPortp[port]->Lock; - PortSetup.XpCps = p->RIOPortp[port]->Xprint.XpCps; - memcpy(PortSetup.XpOn, p->RIOPortp[port]->Xprint.XpOn, MAX_XP_CTRL_LEN); - memcpy(PortSetup.XpOff, p->RIOPortp[port]->Xprint.XpOff, MAX_XP_CTRL_LEN); - PortSetup.XpOn[MAX_XP_CTRL_LEN - 1] = '\0'; - PortSetup.XpOff[MAX_XP_CTRL_LEN - 1] = '\0'; - - if (copy_to_user(argp, &PortSetup, sizeof(PortSetup))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_GET_PORT_PARAMS: - rio_dprintk(RIO_DEBUG_CTRL, "Get port params\n"); - if (copy_from_user(&PortParams, argp, sizeof(struct PortParams))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (PortParams.Port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[PortParams.Port]); - PortParams.Config = PortP->Config; - PortParams.State = PortP->State; - rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortParams.Port); - - if (copy_to_user(argp, &PortParams, sizeof(struct PortParams))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_GET_PORT_TTY: - rio_dprintk(RIO_DEBUG_CTRL, "Get port tty\n"); - if (copy_from_user(&PortTty, argp, sizeof(struct PortTty))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (PortTty.port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - - rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortTty.port); - PortP = (p->RIOPortp[PortTty.port]); - if (copy_to_user(argp, &PortTty, sizeof(struct PortTty))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_SET_PORT_TTY: - if (copy_from_user(&PortTty, argp, sizeof(struct PortTty))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "Set port %d tty\n", PortTty.port); - if (PortTty.port >= (ushort) RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[PortTty.port]); - RIOParam(PortP, RIOC_CONFIG, PortP->State & RIO_MODEM, - OK_TO_SLEEP); - return retval; - - case RIO_SET_PORT_PARAMS: - rio_dprintk(RIO_DEBUG_CTRL, "Set port params\n"); - if (copy_from_user(&PortParams, argp, sizeof(PortParams))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (PortParams.Port >= (ushort) RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[PortParams.Port]); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->Config = PortParams.Config; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_GET_PORT_STATS: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_PORT_STATS\n"); - if (copy_from_user(&portStats, argp, sizeof(struct portStats))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (portStats.port < 0 || portStats.port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[portStats.port]); - portStats.gather = PortP->statsGather; - portStats.txchars = PortP->txchars; - portStats.rxchars = PortP->rxchars; - portStats.opens = PortP->opens; - portStats.closes = PortP->closes; - portStats.ioctls = PortP->ioctls; - if (copy_to_user(argp, &portStats, sizeof(struct portStats))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_RESET_PORT_STATS: - port = arg; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESET_PORT_STATS\n"); - if (port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[port]); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->txchars = 0; - PortP->rxchars = 0; - PortP->opens = 0; - PortP->closes = 0; - PortP->ioctls = 0; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_GATHER_PORT_STATS: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GATHER_PORT_STATS\n"); - if (copy_from_user(&portStats, argp, sizeof(struct portStats))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (portStats.port < 0 || portStats.port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[portStats.port]); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->statsGather = portStats.gather; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_READ_CONFIG: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_CONFIG\n"); - if (copy_to_user(argp, &p->RIOConf, sizeof(struct Conf))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_SET_CONFIG: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_CONFIG\n"); - if (!su) { - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&p->RIOConf, argp, sizeof(struct Conf))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - /* - ** move a few value around - */ - for (Host = 0; Host < p->RIONumHosts; Host++) - if ((p->RIOHosts[Host].Flags & RUN_STATE) == RC_RUNNING) - writew(p->RIOConf.Timer, &p->RIOHosts[Host].ParmMapP->timer); - return retval; - - case RIO_START_POLLER: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_START_POLLER\n"); - return -EINVAL; - - case RIO_STOP_POLLER: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_STOP_POLLER\n"); - if (!su) { - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - p->RIOPolling = NOT_POLLING; - return retval; - - case RIO_SETDEBUG: - case RIO_GETDEBUG: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SETDEBUG/RIO_GETDEBUG\n"); - if (copy_from_user(&DebugCtrl, argp, sizeof(DebugCtrl))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (DebugCtrl.SysPort == NO_PORT) { - if (cmd == RIO_SETDEBUG) { - if (!su) { - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - p->rio_debug = DebugCtrl.Debug; - p->RIODebugWait = DebugCtrl.Wait; - rio_dprintk(RIO_DEBUG_CTRL, "Set global debug to 0x%x set wait to 0x%x\n", p->rio_debug, p->RIODebugWait); - } else { - rio_dprintk(RIO_DEBUG_CTRL, "Get global debug 0x%x wait 0x%x\n", p->rio_debug, p->RIODebugWait); - DebugCtrl.Debug = p->rio_debug; - DebugCtrl.Wait = p->RIODebugWait; - if (copy_to_user(argp, &DebugCtrl, sizeof(DebugCtrl))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET/GET DEBUG: bad port number %d\n", DebugCtrl.SysPort); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - } - } else if (DebugCtrl.SysPort >= RIO_PORTS && DebugCtrl.SysPort != NO_PORT) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET/GET DEBUG: bad port number %d\n", DebugCtrl.SysPort); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } else if (cmd == RIO_SETDEBUG) { - if (!su) { - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - p->RIOPortp[DebugCtrl.SysPort]->Debug = DebugCtrl.Debug; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SETDEBUG 0x%x\n", p->RIOPortp[DebugCtrl.SysPort]->Debug); - } else { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GETDEBUG 0x%x\n", p->RIOPortp[DebugCtrl.SysPort]->Debug); - DebugCtrl.Debug = p->RIOPortp[DebugCtrl.SysPort]->Debug; - if (copy_to_user(argp, &DebugCtrl, sizeof(DebugCtrl))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GETDEBUG: Bad copy to user space\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - } - return retval; - - case RIO_VERSID: - /* - ** Enquire about the release and version. - ** We return MAX_VERSION_LEN bytes, being a - ** textual null terminated string. - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_VERSID\n"); - if (copy_to_user(argp, RIOVersid(), sizeof(struct rioVersion))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_VERSID: Bad copy to user space (host=%d)\n", Host); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_NUM_HOSTS: - /* - ** Enquire as to the number of hosts located - ** at init time. - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_NUM_HOSTS\n"); - if (copy_to_user(argp, &p->RIONumHosts, sizeof(p->RIONumHosts))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_NUM_HOSTS: Bad copy to user space\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_HOST_FOAD: - /* - ** Kill host. This may not be in the final version... - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_FOAD %ld\n", arg); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_FOAD: Not super user\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - p->RIOHalted = 1; - p->RIOSystemUp = 0; - - for (Host = 0; Host < p->RIONumHosts; Host++) { - (void) RIOBoardTest(p->RIOHosts[Host].PaddrP, p->RIOHosts[Host].Caddr, p->RIOHosts[Host].Type, p->RIOHosts[Host].Slot); - memset(&p->RIOHosts[Host].Flags, 0, ((char *) &p->RIOHosts[Host].____end_marker____) - ((char *) &p->RIOHosts[Host].Flags)); - p->RIOHosts[Host].Flags = RC_WAITING; - } - RIOFoadWakeup(p); - p->RIONumBootPkts = 0; - p->RIOBooting = 0; - printk("HEEEEELP!\n"); - - for (loop = 0; loop < RIO_PORTS; loop++) { - spin_lock_init(&p->RIOPortp[loop]->portSem); - p->RIOPortp[loop]->InUse = NOT_INUSE; - } - - p->RIOSystemUp = 0; - return retval; - - case RIO_DOWNLOAD: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD\n"); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Not super user\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&DownLoad, argp, sizeof(DownLoad))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "Copied in download code for product code 0x%x\n", DownLoad.ProductCode); - - /* - ** It is important that the product code is an unsigned object! - */ - if (DownLoad.ProductCode >= MAX_PRODUCT) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Bad product code %d passed\n", DownLoad.ProductCode); - p->RIOError.Error = NO_SUCH_PRODUCT; - return -ENXIO; - } - /* - ** do something! - */ - retval = (*(RIOBootTable[DownLoad.ProductCode])) (p, &DownLoad); - /* <-- Panic */ - p->RIOHalted = 0; - /* - ** and go back, content with a job well completed. - */ - return retval; - - case RIO_PARMS: - { - unsigned int host; - - if (copy_from_user(&host, argp, sizeof(host))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - /* - ** Fetch the parmmap - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PARMS\n"); - if (copy_from_io(argp, p->RIOHosts[host].ParmMapP, sizeof(PARM_MAP))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PARMS: Copy out to user space failed\n"); - return -EFAULT; - } - } - return retval; - - case RIO_HOST_REQ: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ\n"); - if (copy_from_user(&HostReq, argp, sizeof(HostReq))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (HostReq.HostNum >= p->RIONumHosts) { - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Illegal host number %d\n", HostReq.HostNum); - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for host %d\n", HostReq.HostNum); - - if (copy_to_user(HostReq.HostP, &p->RIOHosts[HostReq.HostNum], sizeof(struct Host))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Bad copy to user space\n"); - return -EFAULT; - } - return retval; - - case RIO_HOST_DPRAM: - rio_dprintk(RIO_DEBUG_CTRL, "Request for DPRAM\n"); - if (copy_from_user(&HostDpRam, argp, sizeof(HostDpRam))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (HostDpRam.HostNum >= p->RIONumHosts) { - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Illegal host number %d\n", HostDpRam.HostNum); - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for host %d\n", HostDpRam.HostNum); - - if (p->RIOHosts[HostDpRam.HostNum].Type == RIO_PCI) { - int off; - /* It's hardware like this that really gets on my tits. */ - static unsigned char copy[sizeof(struct DpRam)]; - for (off = 0; off < sizeof(struct DpRam); off++) - copy[off] = readb(p->RIOHosts[HostDpRam.HostNum].Caddr + off); - if (copy_to_user(HostDpRam.DpRamP, copy, sizeof(struct DpRam))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Bad copy to user space\n"); - return -EFAULT; - } - } else if (copy_from_io(HostDpRam.DpRamP, p->RIOHosts[HostDpRam.HostNum].Caddr, sizeof(struct DpRam))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Bad copy to user space\n"); - return -EFAULT; - } - return retval; - - case RIO_SET_BUSY: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_BUSY\n"); - if (arg > 511) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_BUSY: Bad port number %ld\n", arg); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - p->RIOPortp[arg]->State |= RIO_BUSY; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_HOST_PORT: - /* - ** The daemon want port information - ** (probably for debug reasons) - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT\n"); - if (copy_from_user(&PortReq, argp, sizeof(PortReq))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - - if (PortReq.SysPort >= RIO_PORTS) { /* SysPort is unsigned */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Illegal port number %d\n", PortReq.SysPort); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for port %d\n", PortReq.SysPort); - if (copy_to_user(PortReq.PortP, p->RIOPortp[PortReq.SysPort], sizeof(struct Port))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Bad copy to user space\n"); - return -EFAULT; - } - return retval; - - case RIO_HOST_RUP: - /* - ** The daemon want rup information - ** (probably for debug reasons) - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP\n"); - if (copy_from_user(&RupReq, argp, sizeof(RupReq))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (RupReq.HostNum >= p->RIONumHosts) { /* host is unsigned */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Illegal host number %d\n", RupReq.HostNum); - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - if (RupReq.RupNum >= MAX_RUP + LINKS_PER_UNIT) { /* eek! */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Illegal rup number %d\n", RupReq.RupNum); - p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - HostP = &p->RIOHosts[RupReq.HostNum]; - - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Host %d not running\n", RupReq.HostNum); - p->RIOError.Error = HOST_NOT_RUNNING; - return -EIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for rup %d from host %d\n", RupReq.RupNum, RupReq.HostNum); - - if (copy_from_io(RupReq.RupP, HostP->UnixRups[RupReq.RupNum].RupP, sizeof(struct RUP))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Bad copy to user space\n"); - return -EFAULT; - } - return retval; - - case RIO_HOST_LPB: - /* - ** The daemon want lpb information - ** (probably for debug reasons) - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB\n"); - if (copy_from_user(&LpbReq, argp, sizeof(LpbReq))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Bad copy from user space\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (LpbReq.Host >= p->RIONumHosts) { /* host is unsigned */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Illegal host number %d\n", LpbReq.Host); - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - if (LpbReq.Link >= LINKS_PER_UNIT) { /* eek! */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Illegal link number %d\n", LpbReq.Link); - p->RIOError.Error = LINK_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - HostP = &p->RIOHosts[LpbReq.Host]; - - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Host %d not running\n", LpbReq.Host); - p->RIOError.Error = HOST_NOT_RUNNING; - return -EIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for lpb %d from host %d\n", LpbReq.Link, LpbReq.Host); - - if (copy_from_io(LpbReq.LpbP, &HostP->LinkStrP[LpbReq.Link], sizeof(struct LPB))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Bad copy to user space\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - /* - ** Here 3 IOCTL's that allow us to change the way in which - ** rio logs errors. send them just to syslog or send them - ** to both syslog and console or send them to just the console. - ** - ** See RioStrBuf() in util.c for the other half. - */ - case RIO_SYSLOG_ONLY: - p->RIOPrintLogState = PRINT_TO_LOG; /* Just syslog */ - return 0; - - case RIO_SYSLOG_CONS: - p->RIOPrintLogState = PRINT_TO_LOG_CONS; /* syslog and console */ - return 0; - - case RIO_CONS_ONLY: - p->RIOPrintLogState = PRINT_TO_CONS; /* Just console */ - return 0; - - case RIO_SIGNALS_ON: - if (p->RIOSignalProcess) { - p->RIOError.Error = SIGNALS_ALREADY_SET; - return -EBUSY; - } - /* FIXME: PID tracking */ - p->RIOSignalProcess = current->pid; - p->RIOPrintDisabled = DONT_PRINT; - return retval; - - case RIO_SIGNALS_OFF: - if (p->RIOSignalProcess != current->pid) { - p->RIOError.Error = NOT_RECEIVING_PROCESS; - return -EPERM; - } - rio_dprintk(RIO_DEBUG_CTRL, "Clear signal process to zero\n"); - p->RIOSignalProcess = 0; - return retval; - - case RIO_SET_BYTE_MODE: - for (Host = 0; Host < p->RIONumHosts; Host++) - if (p->RIOHosts[Host].Type == RIO_AT) - p->RIOHosts[Host].Mode &= ~WORD_OPERATION; - return retval; - - case RIO_SET_WORD_MODE: - for (Host = 0; Host < p->RIONumHosts; Host++) - if (p->RIOHosts[Host].Type == RIO_AT) - p->RIOHosts[Host].Mode |= WORD_OPERATION; - return retval; - - case RIO_SET_FAST_BUS: - for (Host = 0; Host < p->RIONumHosts; Host++) - if (p->RIOHosts[Host].Type == RIO_AT) - p->RIOHosts[Host].Mode |= FAST_AT_BUS; - return retval; - - case RIO_SET_SLOW_BUS: - for (Host = 0; Host < p->RIONumHosts; Host++) - if (p->RIOHosts[Host].Type == RIO_AT) - p->RIOHosts[Host].Mode &= ~FAST_AT_BUS; - return retval; - - case RIO_MAP_B50_TO_50: - case RIO_MAP_B50_TO_57600: - case RIO_MAP_B110_TO_110: - case RIO_MAP_B110_TO_115200: - rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping\n"); - port = arg; - if (port < 0 || port > 511) { - rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping: Bad port number %d\n", port); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - switch (cmd) { - case RIO_MAP_B50_TO_50: - p->RIOPortp[port]->Config |= RIO_MAP_50_TO_50; - break; - case RIO_MAP_B50_TO_57600: - p->RIOPortp[port]->Config &= ~RIO_MAP_50_TO_50; - break; - case RIO_MAP_B110_TO_110: - p->RIOPortp[port]->Config |= RIO_MAP_110_TO_110; - break; - case RIO_MAP_B110_TO_115200: - p->RIOPortp[port]->Config &= ~RIO_MAP_110_TO_110; - break; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_STREAM_INFO: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_STREAM_INFO\n"); - return -EINVAL; - - case RIO_SEND_PACKET: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SEND_PACKET\n"); - if (copy_from_user(&SendPack, argp, sizeof(SendPack))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SEND_PACKET: Bad copy from user space\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (SendPack.PortNum >= 128) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - - PortP = p->RIOPortp[SendPack.PortNum]; - rio_spin_lock_irqsave(&PortP->portSem, flags); - - if (!can_add_transmit(&PacketP, PortP)) { - p->RIOError.Error = UNIT_IS_IN_USE; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -ENOSPC; - } - - for (loop = 0; loop < (ushort) (SendPack.Len & 127); loop++) - writeb(SendPack.Data[loop], &PacketP->data[loop]); - - writeb(SendPack.Len, &PacketP->len); - - add_transmit(PortP); - /* - ** Count characters transmitted for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += (SendPack.Len & 127); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_NO_MESG: - if (su) - p->RIONoMessage = 1; - return su ? 0 : -EPERM; - - case RIO_MESG: - if (su) - p->RIONoMessage = 0; - return su ? 0 : -EPERM; - - case RIO_WHAT_MESG: - if (copy_to_user(argp, &p->RIONoMessage, sizeof(p->RIONoMessage))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_WHAT_MESG: Bad copy to user space\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_MEM_DUMP: - if (copy_from_user(&SubCmd, argp, sizeof(struct SubCmdStruct))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP host %d rup %d addr %x\n", SubCmd.Host, SubCmd.Rup, SubCmd.Addr); - - if (SubCmd.Rup >= MAX_RUP + LINKS_PER_UNIT) { - p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - if (SubCmd.Host >= p->RIONumHosts) { - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - port = p->RIOHosts[SubCmd.Host].UnixRups[SubCmd.Rup].BaseSysPort; - - PortP = p->RIOPortp[port]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - if (RIOPreemptiveCmd(p, PortP, RIOC_MEMDUMP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP failed\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EBUSY; - } else - PortP->State |= RIO_BUSY; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (copy_to_user(argp, p->RIOMemDump, MEMDUMP_SIZE)) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_TICK: - if (arg >= p->RIONumHosts) - return -EINVAL; - rio_dprintk(RIO_DEBUG_CTRL, "Set interrupt for host %ld\n", arg); - writeb(0xFF, &p->RIOHosts[arg].SetInt); - return 0; - - case RIO_TOCK: - if (arg >= p->RIONumHosts) - return -EINVAL; - rio_dprintk(RIO_DEBUG_CTRL, "Clear interrupt for host %ld\n", arg); - writeb(0xFF, &p->RIOHosts[arg].ResetInt); - return 0; - - case RIO_READ_CHECK: - /* Check reads for pkts with data[0] the same */ - p->RIOReadCheck = !p->RIOReadCheck; - if (copy_to_user(argp, &p->RIOReadCheck, sizeof(unsigned int))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_READ_REGISTER: - if (copy_from_user(&SubCmd, argp, sizeof(struct SubCmdStruct))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER host %d rup %d port %d reg %x\n", SubCmd.Host, SubCmd.Rup, SubCmd.Port, SubCmd.Addr); - - if (SubCmd.Port > 511) { - rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping: Bad port number %d\n", SubCmd.Port); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - if (SubCmd.Rup >= MAX_RUP + LINKS_PER_UNIT) { - p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - if (SubCmd.Host >= p->RIONumHosts) { - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - port = p->RIOHosts[SubCmd.Host].UnixRups[SubCmd.Rup].BaseSysPort + SubCmd.Port; - PortP = p->RIOPortp[port]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - if (RIOPreemptiveCmd(p, PortP, RIOC_READ_REGISTER) == - RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER failed\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EBUSY; - } else - PortP->State |= RIO_BUSY; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (copy_to_user(argp, &p->CdRegister, sizeof(unsigned int))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - /* - ** rio_make_dev: given port number (0-511) ORed with port type - ** (RIO_DEV_DIRECT, RIO_DEV_MODEM, RIO_DEV_XPRINT) return dev_t - ** value to pass to mknod to create the correct device node. - */ - case RIO_MAKE_DEV: - { - unsigned int port = arg & RIO_MODEM_MASK; - unsigned int ret; - - switch (arg & RIO_DEV_MASK) { - case RIO_DEV_DIRECT: - ret = drv_makedev(MAJOR(dev), port); - rio_dprintk(RIO_DEBUG_CTRL, "Makedev direct 0x%x is 0x%x\n", port, ret); - return ret; - case RIO_DEV_MODEM: - ret = drv_makedev(MAJOR(dev), (port | RIO_MODEM_BIT)); - rio_dprintk(RIO_DEBUG_CTRL, "Makedev modem 0x%x is 0x%x\n", port, ret); - return ret; - case RIO_DEV_XPRINT: - ret = drv_makedev(MAJOR(dev), port); - rio_dprintk(RIO_DEBUG_CTRL, "Makedev printer 0x%x is 0x%x\n", port, ret); - return ret; - } - rio_dprintk(RIO_DEBUG_CTRL, "MAKE Device is called\n"); - return -EINVAL; - } - /* - ** rio_minor: given a dev_t from a stat() call, return - ** the port number (0-511) ORed with the port type - ** ( RIO_DEV_DIRECT, RIO_DEV_MODEM, RIO_DEV_XPRINT ) - */ - case RIO_MINOR: - { - dev_t dv; - int mino; - unsigned long ret; - - dv = (dev_t) (arg); - mino = RIO_UNMODEM(dv); - - if (RIO_ISMODEM(dv)) { - rio_dprintk(RIO_DEBUG_CTRL, "Minor for device 0x%x: modem %d\n", dv, mino); - ret = mino | RIO_DEV_MODEM; - } else { - rio_dprintk(RIO_DEBUG_CTRL, "Minor for device 0x%x: direct %d\n", dv, mino); - ret = mino | RIO_DEV_DIRECT; - } - return ret; - } - } - rio_dprintk(RIO_DEBUG_CTRL, "INVALID DAEMON IOCTL 0x%x\n", cmd); - p->RIOError.Error = IOCTL_COMMAND_UNKNOWN; - - func_exit(); - return -EINVAL; -} - -/* -** Pre-emptive commands go on RUPs and are only one byte long. -*/ -int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd) -{ - struct CmdBlk *CmdBlkP; - struct PktCmd_M *PktCmdP; - int Ret; - ushort rup; - int port; - - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_CTRL, "Preemptive command to deleted RTA ignored\n"); - return RIO_FAIL; - } - - if ((PortP->InUse == (typeof(PortP->InUse))-1) || - !(CmdBlkP = RIOGetCmdBlk())) { - rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block " - "for command %d on port %d\n", Cmd, PortP->PortNum); - return RIO_FAIL; - } - - rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", - CmdBlkP, PortP->InUse); - - PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0]; - - CmdBlkP->Packet.src_unit = 0; - if (PortP->SecondBlock) - rup = PortP->ID2; - else - rup = PortP->RupNum; - CmdBlkP->Packet.dest_unit = rup; - CmdBlkP->Packet.src_port = COMMAND_RUP; - CmdBlkP->Packet.dest_port = COMMAND_RUP; - CmdBlkP->Packet.len = PKT_CMD_BIT | 2; - CmdBlkP->PostFuncP = RIOUnUse; - CmdBlkP->PostArg = (unsigned long) PortP; - PktCmdP->Command = Cmd; - port = PortP->HostPort % (ushort) PORTS_PER_RTA; - /* - ** Index ports 8-15 for 2nd block of 16 port RTA. - */ - if (PortP->SecondBlock) - port += (ushort) PORTS_PER_RTA; - PktCmdP->PhbNum = port; - - switch (Cmd) { - case RIOC_MEMDUMP: - rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p " - "(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr); - PktCmdP->SubCommand = RIOC_MEMDUMP; - PktCmdP->SubAddr = SubCmd.Addr; - break; - case RIOC_FCLOSE: - rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", - CmdBlkP); - break; - case RIOC_READ_REGISTER: - rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) " - "command blk %p\n", (int) SubCmd.Addr, CmdBlkP); - PktCmdP->SubCommand = RIOC_READ_REGISTER; - PktCmdP->SubAddr = SubCmd.Addr; - break; - case RIOC_RESUME: - rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", - CmdBlkP); - break; - case RIOC_RFLUSH: - rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", - CmdBlkP); - CmdBlkP->PostFuncP = RIORFlushEnable; - break; - case RIOC_SUSPEND: - rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", - CmdBlkP); - break; - - case RIOC_MGET: - rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", - CmdBlkP); - break; - - case RIOC_MSET: - case RIOC_MBIC: - case RIOC_MBIS: - CmdBlkP->Packet.data[4] = (char) PortP->ModemLines; - rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command " - "blk %p\n", CmdBlkP); - break; - - case RIOC_WFLUSH: - /* - ** If we have queued up the maximum number of Write flushes - ** allowed then we should not bother sending any more to the - ** RTA. - */ - if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) { - rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, " - "WflushFlag about to wrap!"); - RIOFreeCmdBlk(CmdBlkP); - return (RIO_FAIL); - } else { - rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command " - "blk %p\n", CmdBlkP); - CmdBlkP->PostFuncP = RIOWFlushMark; - } - break; - } - - PortP->InUse++; - - Ret = RIOQueueCmdBlk(PortP->HostP, rup, CmdBlkP); - - return Ret; -} diff --git a/drivers/char/rio/riodrvr.h b/drivers/char/rio/riodrvr.h deleted file mode 100644 index 0907e711b355..000000000000 --- a/drivers/char/rio/riodrvr.h +++ /dev/null @@ -1,138 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riodrvr.h -** SID : 1.3 -** Last Modified : 11/6/98 09:22:46 -** Retrieved : 11/6/98 09:22:46 -** -** ident @(#)riodrvr.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __riodrvr_h -#define __riodrvr_h - -#include /* for HZ */ - -#define MEMDUMP_SIZE 32 -#define MOD_DISABLE (RIO_NOREAD|RIO_NOWRITE|RIO_NOXPRINT) - - -struct rio_info { - int mode; /* Intr or polled, word/byte */ - spinlock_t RIOIntrSem; /* Interrupt thread sem */ - int current_chan; /* current channel */ - int RIOFailed; /* Not initialised ? */ - int RIOInstallAttempts; /* no. of rio-install() calls */ - int RIOLastPCISearch; /* status of last search */ - int RIONumHosts; /* Number of RIO Hosts */ - struct Host *RIOHosts; /* RIO Host values */ - struct Port **RIOPortp; /* RIO port values */ -/* -** 02.03.1999 ARG - ESIL 0820 fix -** We no longer use RIOBootMode -** - int RIOBootMode; * RIO boot mode * -** -*/ - int RIOPrintDisabled; /* RIO printing disabled ? */ - int RIOPrintLogState; /* RIO printing state ? */ - int RIOPolling; /* Polling ? */ -/* -** 09.12.1998 ARG - ESIL 0776 part fix -** The 'RIO_QUICK_CHECK' ioctl was using RIOHalted. -** The fix for this ESIL introduces another member (RIORtaDisCons) here to be -** updated in RIOConCon() - to keep track of RTA connections/disconnections. -** 'RIO_QUICK_CHECK' now returns the value of RIORtaDisCons. -*/ - int RIOHalted; /* halted ? */ - int RIORtaDisCons; /* RTA connections/disconnections */ - unsigned int RIOReadCheck; /* Rio read check */ - unsigned int RIONoMessage; /* To display message or not */ - unsigned int RIONumBootPkts; /* how many packets for an RTA */ - unsigned int RIOBootCount; /* size of RTA code */ - unsigned int RIOBooting; /* count of outstanding boots */ - unsigned int RIOSystemUp; /* Booted ?? */ - unsigned int RIOCounting; /* for counting interrupts */ - unsigned int RIOIntCount; /* # of intr since last check */ - unsigned int RIOTxCount; /* number of xmit intrs */ - unsigned int RIORxCount; /* number of rx intrs */ - unsigned int RIORupCount; /* number of rup intrs */ - int RIXTimer; - int RIOBufferSize; /* Buffersize */ - int RIOBufferMask; /* Buffersize */ - - int RIOFirstMajor; /* First host card's major no */ - - unsigned int RIOLastPortsMapped; /* highest port number known */ - unsigned int RIOFirstPortsMapped; /* lowest port number known */ - - unsigned int RIOLastPortsBooted; /* highest port number running */ - unsigned int RIOFirstPortsBooted; /* lowest port number running */ - - unsigned int RIOLastPortsOpened; /* highest port number running */ - unsigned int RIOFirstPortsOpened; /* lowest port number running */ - - /* Flag to say that the topology information has been changed. */ - unsigned int RIOQuickCheck; - unsigned int CdRegister; /* ??? */ - int RIOSignalProcess; /* Signalling process */ - int rio_debug; /* To debug ... */ - int RIODebugWait; /* For what ??? */ - int tpri; /* Thread prio */ - int tid; /* Thread id */ - unsigned int _RIO_Polled; /* Counter for polling */ - unsigned int _RIO_Interrupted; /* Counter for interrupt */ - int intr_tid; /* iointset return value */ - int TxEnSem; /* TxEnable Semaphore */ - - - struct Error RIOError; /* to Identify what went wrong */ - struct Conf RIOConf; /* Configuration ??? */ - struct ttystatics channel[RIO_PORTS]; /* channel information */ - char RIOBootPackets[1 + (SIXTY_FOUR_K / RTA_BOOT_DATA_SIZE)] - [RTA_BOOT_DATA_SIZE]; - struct Map RIOConnectTable[TOTAL_MAP_ENTRIES]; - struct Map RIOSavedTable[TOTAL_MAP_ENTRIES]; - - /* RTA to host binding table for master/slave operation */ - unsigned long RIOBindTab[MAX_RTA_BINDINGS]; - /* RTA memory dump variable */ - unsigned char RIOMemDump[MEMDUMP_SIZE]; - struct ModuleInfo RIOModuleTypes[MAX_MODULE_TYPES]; - -}; - - -#ifdef linux -#define debug(x) printk x -#else -#define debug(x) kkprintf x -#endif - - - -#define RIO_RESET_INT 0x7d80 - -#endif /* __riodrvr.h */ diff --git a/drivers/char/rio/rioinfo.h b/drivers/char/rio/rioinfo.h deleted file mode 100644 index 42ff1e79d96f..000000000000 --- a/drivers/char/rio/rioinfo.h +++ /dev/null @@ -1,92 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioinfo.h -** SID : 1.2 -** Last Modified : 11/6/98 14:07:49 -** Retrieved : 11/6/98 14:07:50 -** -** ident @(#)rioinfo.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rioinfo_h -#define __rioinfo_h - -/* -** Host card data structure -*/ -struct RioHostInfo { - long location; /* RIO Card Base I/O address */ - long vector; /* RIO Card IRQ vector */ - int bus; /* ISA/EISA/MCA/PCI */ - int mode; /* pointer to host mode - INTERRUPT / POLLED */ - struct old_sgttyb - *Sg; /* pointer to default term characteristics */ -}; - - -/* Mode in rio device info */ -#define INTERRUPTED_MODE 0x01 /* Interrupt is generated */ -#define POLLED_MODE 0x02 /* No interrupt */ -#define AUTO_MODE 0x03 /* Auto mode */ - -#define WORD_ACCESS_MODE 0x10 /* Word Access Mode */ -#define BYTE_ACCESS_MODE 0x20 /* Byte Access Mode */ - - -/* Bus type that RIO supports */ -#define ISA_BUS 0x01 /* The card is ISA */ -#define EISA_BUS 0x02 /* The card is EISA */ -#define MCA_BUS 0x04 /* The card is MCA */ -#define PCI_BUS 0x08 /* The card is PCI */ - -/* -** 11.11.1998 ARG - ESIL ???? part fix -** Moved definition for 'CHAN' here from rioinfo.c (it is now -** called 'DEF_TERM_CHARACTERISTICS'). -*/ - -#define DEF_TERM_CHARACTERISTICS \ -{ \ - B19200, B19200, /* input and output speed */ \ - 'H' - '@', /* erase char */ \ - -1, /* 2nd erase char */ \ - 'U' - '@', /* kill char */ \ - ECHO | CRMOD, /* mode */ \ - 'C' - '@', /* interrupt character */ \ - '\\' - '@', /* quit char */ \ - 'Q' - '@', /* start char */ \ - 'S' - '@', /* stop char */ \ - 'D' - '@', /* EOF */ \ - -1, /* brk */ \ - (LCRTBS | LCRTERA | LCRTKIL | LCTLECH), /* local mode word */ \ - 'Z' - '@', /* process stop */ \ - 'Y' - '@', /* delayed stop */ \ - 'R' - '@', /* reprint line */ \ - 'O' - '@', /* flush output */ \ - 'W' - '@', /* word erase */ \ - 'V' - '@' /* literal next char */ \ -} - -#endif /* __rioinfo_h */ diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c deleted file mode 100644 index 24a282bb89d4..000000000000 --- a/drivers/char/rio/rioinit.c +++ /dev/null @@ -1,421 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioinit.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:43 -** Retrieved : 11/6/98 10:33:49 -** -** ident @(#)rioinit.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - - -#include "linux_compat.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "rio_linux.h" - -int RIOPCIinit(struct rio_info *p, int Mode); - -static int RIOScrub(int, u8 __iomem *, int); - - -/** -** RIOAssignAT : -** -** Fill out the fields in the p->RIOHosts structure now we know we know -** we have a board present. -** -** bits < 0 indicates 8 bit operation requested, -** bits > 0 indicates 16 bit operation. -*/ - -int RIOAssignAT(struct rio_info *p, int Base, void __iomem *virtAddr, int mode) -{ - int bits; - struct DpRam __iomem *cardp = (struct DpRam __iomem *)virtAddr; - - if ((Base < ONE_MEG) || (mode & BYTE_ACCESS_MODE)) - bits = BYTE_OPERATION; - else - bits = WORD_OPERATION; - - /* - ** Board has passed its scrub test. Fill in all the - ** transient stuff. - */ - p->RIOHosts[p->RIONumHosts].Caddr = virtAddr; - p->RIOHosts[p->RIONumHosts].CardP = virtAddr; - - /* - ** Revision 01 AT host cards don't support WORD operations, - */ - if (readb(&cardp->DpRevision) == 01) - bits = BYTE_OPERATION; - - p->RIOHosts[p->RIONumHosts].Type = RIO_AT; - p->RIOHosts[p->RIONumHosts].Copy = rio_copy_to_card; - /* set this later */ - p->RIOHosts[p->RIONumHosts].Slot = -1; - p->RIOHosts[p->RIONumHosts].Mode = SLOW_LINKS | SLOW_AT_BUS | bits; - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE , - &p->RIOHosts[p->RIONumHosts].Control); - writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE, - &p->RIOHosts[p->RIONumHosts].Control); - writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); - p->RIOHosts[p->RIONumHosts].UniqueNum = - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)| - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)| - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)| - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Uniquenum 0x%x\n",p->RIOHosts[p->RIONumHosts].UniqueNum); - - p->RIONumHosts++; - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base); - return(1); -} - -static u8 val[] = { -#ifdef VERY_LONG_TEST - 0x00, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, - 0xa5, 0xff, 0x5a, 0x00, 0xff, 0xc9, 0x36, -#endif - 0xff, 0x00, 0x00 }; - -#define TEST_END sizeof(val) - -/* -** RAM test a board. -** Nothing too complicated, just enough to check it out. -*/ -int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, int slot) -{ - struct DpRam __iomem *DpRam = caddr; - void __iomem *ram[4]; - int size[4]; - int op, bank; - int nbanks; - - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Reset host type=%d, DpRam=%p, slot=%d\n", - type, DpRam, slot); - - RIOHostReset(type, DpRam, slot); - - /* - ** Scrub the memory. This comes in several banks: - ** DPsram1 - 7000h bytes - ** DPsram2 - 200h bytes - ** DPsram3 - 7000h bytes - ** scratch - 1000h bytes - */ - - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Setup ram/size arrays\n"); - - size[0] = DP_SRAM1_SIZE; - size[1] = DP_SRAM2_SIZE; - size[2] = DP_SRAM3_SIZE; - size[3] = DP_SCRATCH_SIZE; - - ram[0] = DpRam->DpSram1; - ram[1] = DpRam->DpSram2; - ram[2] = DpRam->DpSram3; - nbanks = (type == RIO_PCI) ? 3 : 4; - if (nbanks == 4) - ram[3] = DpRam->DpScratch; - - - if (nbanks == 3) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Memory: %p(0x%x), %p(0x%x), %p(0x%x)\n", - ram[0], size[0], ram[1], size[1], ram[2], size[2]); - } else { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: %p(0x%x), %p(0x%x), %p(0x%x), %p(0x%x)\n", - ram[0], size[0], ram[1], size[1], ram[2], size[2], ram[3], size[3]); - } - - /* - ** This scrub operation will test for crosstalk between - ** banks. TEST_END is a magic number, and relates to the offset - ** within the 'val' array used by Scrub. - */ - for (op=0; opMapping[UnitId].Name, "UNKNOWN RTA X-XX", 17); - HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts); - if ((UnitId+1) > 9) { - HostP->Mapping[UnitId].Name[14]='0'+((UnitId+1)/10); - HostP->Mapping[UnitId].Name[15]='0'+((UnitId+1)%10); - } - else { - HostP->Mapping[UnitId].Name[14]='1'+UnitId; - HostP->Mapping[UnitId].Name[15]=0; - } - return 0; -} - -#define RIO_RELEASE "Linux" -#define RELEASE_ID "1.0" - -static struct rioVersion stVersion; - -struct rioVersion *RIOVersid(void) -{ - strlcpy(stVersion.version, "RIO driver for linux V1.0", - sizeof(stVersion.version)); - strlcpy(stVersion.buildDate, __DATE__, - sizeof(stVersion.buildDate)); - - return &stVersion; -} - -void RIOHostReset(unsigned int Type, struct DpRam __iomem *DpRamP, unsigned int Slot) -{ - /* - ** Reset the Tpu - */ - rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: type 0x%x", Type); - switch ( Type ) { - case RIO_AT: - rio_dprintk (RIO_DEBUG_INIT, " (RIO_AT)\n"); - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | BYTE_OPERATION | - SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl); - writeb(0xFF, &DpRamP->DpResetTpu); - udelay(3); - rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: Don't know if it worked. Try reset again\n"); - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | - BYTE_OPERATION | SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl); - writeb(0xFF, &DpRamP->DpResetTpu); - udelay(3); - break; - case RIO_PCI: - rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n"); - writeb(RIO_PCI_BOOT_FROM_RAM, &DpRamP->DpControl); - writeb(0xFF, &DpRamP->DpResetInt); - writeb(0xFF, &DpRamP->DpResetTpu); - udelay(100); - break; - default: - rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n"); - break; - } - return; -} diff --git a/drivers/char/rio/riointr.c b/drivers/char/rio/riointr.c deleted file mode 100644 index 2e71aecae206..000000000000 --- a/drivers/char/rio/riointr.c +++ /dev/null @@ -1,645 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riointr.c -** SID : 1.2 -** Last Modified : 11/6/98 10:33:44 -** Retrieved : 11/6/98 10:33:49 -** -** ident @(#)riointr.c 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" - - -static void RIOReceive(struct rio_info *, struct Port *); - - -static char *firstchars(char *p, int nch) -{ - static char buf[2][128]; - static int t = 0; - t = !t; - memcpy(buf[t], p, nch); - buf[t][nch] = 0; - return buf[t]; -} - - -#define INCR( P, I ) ((P) = (((P)+(I)) & p->RIOBufferMask)) -/* Enable and start the transmission of packets */ -void RIOTxEnable(char *en) -{ - struct Port *PortP; - struct rio_info *p; - struct tty_struct *tty; - int c; - struct PKT __iomem *PacketP; - unsigned long flags; - - PortP = (struct Port *) en; - p = (struct rio_info *) PortP->p; - tty = PortP->gs.port.tty; - - - rio_dprintk(RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", PortP->PortNum, PortP->gs.xmit_cnt); - - if (!PortP->gs.xmit_cnt) - return; - - - /* This routine is an order of magnitude simpler than the specialix - version. One of the disadvantages is that this version will send - an incomplete packet (usually 64 bytes instead of 72) once for - every 4k worth of data. Let's just say that this won't influence - performance significantly..... */ - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - while (can_add_transmit(&PacketP, PortP)) { - c = PortP->gs.xmit_cnt; - if (c > PKT_MAX_DATA_LEN) - c = PKT_MAX_DATA_LEN; - - /* Don't copy past the end of the source buffer */ - if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail) - c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail; - - { - int t; - t = (c > 10) ? 10 : c; - - rio_dprintk(RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", PortP->PortNum, c, firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail, t), firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail + c - t, t)); - } - /* If for one reason or another, we can't copy more data, - we're done! */ - if (c == 0) - break; - - rio_memcpy_toio(PortP->HostP->Caddr, PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c); - /* udelay (1); */ - - writeb(c, &(PacketP->len)); - if (!(PortP->State & RIO_DELETED)) { - add_transmit(PortP); - /* - ** Count chars tx'd for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += c; - } - PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE - 1); - PortP->gs.xmit_cnt -= c; - } - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2 * PKT_MAX_DATA_LEN)) - tty_wakeup(PortP->gs.port.tty); - -} - - -/* -** RIO Host Service routine. Does all the work traditionally associated with an -** interrupt. -*/ -static int RupIntr; -static int RxIntr; -static int TxIntr; - -void RIOServiceHost(struct rio_info *p, struct Host *HostP) -{ - rio_spin_lock(&HostP->HostLock); - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - static int t = 0; - rio_spin_unlock(&HostP->HostLock); - if ((t++ % 200) == 0) - rio_dprintk(RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int) HostP->Flags); - return; - } - rio_spin_unlock(&HostP->HostLock); - - if (readw(&HostP->ParmMapP->rup_intr)) { - writew(0, &HostP->ParmMapP->rup_intr); - p->RIORupCount++; - RupIntr++; - rio_dprintk(RIO_DEBUG_INTR, "rio: RUP interrupt on host %Zd\n", HostP - p->RIOHosts); - RIOPollHostCommands(p, HostP); - } - - if (readw(&HostP->ParmMapP->rx_intr)) { - int port; - - writew(0, &HostP->ParmMapP->rx_intr); - p->RIORxCount++; - RxIntr++; - - rio_dprintk(RIO_DEBUG_INTR, "rio: RX interrupt on host %Zd\n", HostP - p->RIOHosts); - /* - ** Loop through every port. If the port is mapped into - ** the system ( i.e. has /dev/ttyXXXX associated ) then it is - ** worth checking. If the port isn't open, grab any packets - ** hanging on its receive queue and stuff them on the free - ** list; check for commands on the way. - */ - for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) { - struct Port *PortP = p->RIOPortp[port]; - struct tty_struct *ttyP; - struct PKT __iomem *PacketP; - - /* - ** not mapped in - most of the RIOPortp[] information - ** has not been set up! - ** Optimise: ports come in bundles of eight. - */ - if (!PortP->Mapped) { - port += 7; - continue; /* with the next port */ - } - - /* - ** If the host board isn't THIS host board, check the next one. - ** optimise: ports come in bundles of eight. - */ - if (PortP->HostP != HostP) { - port += 7; - continue; - } - - /* - ** Let us see - is the port open? If not, then don't service it. - */ - if (!(PortP->PortState & PORT_ISOPEN)) { - continue; - } - - /* - ** find corresponding tty structure. The process of mapping - ** the ports puts these here. - */ - ttyP = PortP->gs.port.tty; - - /* - ** Lock the port before we begin working on it. - */ - rio_spin_lock(&PortP->portSem); - - /* - ** Process received data if there is any. - */ - if (can_remove_receive(&PacketP, PortP)) - RIOReceive(p, PortP); - - /* - ** If there is no data left to be read from the port, and - ** it's handshake bit is set, then we must clear the handshake, - ** so that that downstream RTA is re-enabled. - */ - if (!can_remove_receive(&PacketP, PortP) && (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET)) { - /* - ** MAGIC! ( Basically, handshake the RX buffer, so that - ** the RTAs upstream can be re-enabled. ) - */ - rio_dprintk(RIO_DEBUG_INTR, "Set RX handshake bit\n"); - writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake); - } - rio_spin_unlock(&PortP->portSem); - } - } - - if (readw(&HostP->ParmMapP->tx_intr)) { - int port; - - writew(0, &HostP->ParmMapP->tx_intr); - - p->RIOTxCount++; - TxIntr++; - rio_dprintk(RIO_DEBUG_INTR, "rio: TX interrupt on host %Zd\n", HostP - p->RIOHosts); - - /* - ** Loop through every port. - ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX - ** associated ) then it is worth checking. - */ - for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) { - struct Port *PortP = p->RIOPortp[port]; - struct tty_struct *ttyP; - struct PKT __iomem *PacketP; - - /* - ** not mapped in - most of the RIOPortp[] information - ** has not been set up! - */ - if (!PortP->Mapped) { - port += 7; - continue; /* with the next port */ - } - - /* - ** If the host board isn't running, then its data structures - ** are no use to us - continue quietly. - */ - if (PortP->HostP != HostP) { - port += 7; - continue; /* with the next port */ - } - - /* - ** Let us see - is the port open? If not, then don't service it. - */ - if (!(PortP->PortState & PORT_ISOPEN)) { - continue; - } - - rio_dprintk(RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port); - /* - ** Lock the port before we begin working on it. - */ - rio_spin_lock(&PortP->portSem); - - /* - ** If we can't add anything to the transmit queue, then - ** we need do none of this processing. - */ - if (!can_add_transmit(&PacketP, PortP)) { - rio_dprintk(RIO_DEBUG_INTR, "Can't add to port, so skipping.\n"); - rio_spin_unlock(&PortP->portSem); - continue; - } - - /* - ** find corresponding tty structure. The process of mapping - ** the ports puts these here. - */ - ttyP = PortP->gs.port.tty; - /* If ttyP is NULL, the port is getting closed. Forget about it. */ - if (!ttyP) { - rio_dprintk(RIO_DEBUG_INTR, "no tty, so skipping.\n"); - rio_spin_unlock(&PortP->portSem); - continue; - } - /* - ** If there is more room available we start up the transmit - ** data process again. This can be direct I/O, if the cookmode - ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the - ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch - ** characters via the line discipline. We must always call - ** the line discipline, - ** so that user input characters can be echoed correctly. - ** - ** ++++ Update +++++ - ** With the advent of double buffering, we now see if - ** TxBufferOut-In is non-zero. If so, then we copy a packet - ** to the output place, and set it going. If this empties - ** the buffer, then we must issue a wakeup( ) on OUT. - ** If it frees space in the buffer then we must issue - ** a wakeup( ) on IN. - ** - ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we - ** have to send a WFLUSH command down the PHB, to mark the - ** end point of a WFLUSH. We also need to clear out any - ** data from the double buffer! ( note that WflushFlag is a - ** *count* of the number of WFLUSH commands outstanding! ) - ** - ** ++++ And there's more! - ** If an RTA is powered off, then on again, and rebooted, - ** whilst it has ports open, then we need to re-open the ports. - ** ( reasonable enough ). We can't do this when we spot the - ** re-boot, in interrupt time, because the queue is probably - ** full. So, when we come in here, we need to test if any - ** ports are in this condition, and re-open the port before - ** we try to send any more data to it. Now, the re-booted - ** RTA will be discarding packets from the PHB until it - ** receives this open packet, but don't worry tooo much - ** about that. The one thing that is interesting is the - ** combination of this effect and the WFLUSH effect! - */ - /* For now don't handle RTA reboots. -- REW. - Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */ - if (PortP->MagicFlags) { - if (PortP->MagicFlags & MAGIC_REBOOT) { - /* - ** well, the RTA has been rebooted, and there is room - ** on its queue to add the open packet that is required. - ** - ** The messy part of this line is trying to decide if - ** we need to call the Param function as a tty or as - ** a modem. - ** DONT USE CLOCAL AS A TEST FOR THIS! - ** - ** If we can't param the port, then move on to the - ** next port. - */ - PortP->InUse = NOT_INUSE; - - rio_spin_unlock(&PortP->portSem); - if (RIOParam(PortP, RIOC_OPEN, ((PortP->Cor2Copy & (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) == (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL) - continue; /* with next port */ - rio_spin_lock(&PortP->portSem); - PortP->MagicFlags &= ~MAGIC_REBOOT; - } - - /* - ** As mentioned above, this is a tacky hack to cope - ** with WFLUSH - */ - if (PortP->WflushFlag) { - rio_dprintk(RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n"); - - if (PortP->InUse) - rio_dprintk(RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n"); - } - - while (PortP->WflushFlag && can_add_transmit(&PacketP, PortP) && (PortP->InUse == NOT_INUSE)) { - int p; - struct PktCmd __iomem *PktCmdP; - - rio_dprintk(RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n"); - /* - ** make it look just like a WFLUSH command - */ - PktCmdP = (struct PktCmd __iomem *) &PacketP->data[0]; - - writeb(RIOC_WFLUSH, &PktCmdP->Command); - - p = PortP->HostPort % (u16) PORTS_PER_RTA; - - /* - ** If second block of ports for 16 port RTA, add 8 - ** to index 8-15. - */ - if (PortP->SecondBlock) - p += PORTS_PER_RTA; - - writeb(p, &PktCmdP->PhbNum); - - /* - ** to make debuggery easier - */ - writeb('W', &PacketP->data[2]); - writeb('F', &PacketP->data[3]); - writeb('L', &PacketP->data[4]); - writeb('U', &PacketP->data[5]); - writeb('S', &PacketP->data[6]); - writeb('H', &PacketP->data[7]); - writeb(' ', &PacketP->data[8]); - writeb('0' + PortP->WflushFlag, &PacketP->data[9]); - writeb(' ', &PacketP->data[10]); - writeb(' ', &PacketP->data[11]); - writeb('\0', &PacketP->data[12]); - - /* - ** its two bytes long! - */ - writeb(PKT_CMD_BIT | 2, &PacketP->len); - - /* - ** queue it! - */ - if (!(PortP->State & RIO_DELETED)) { - add_transmit(PortP); - /* - ** Count chars tx'd for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += 2; - } - - if (--(PortP->WflushFlag) == 0) { - PortP->MagicFlags &= ~MAGIC_FLUSH; - } - - rio_dprintk(RIO_DEBUG_INTR, "Wflush count now stands at %d\n", PortP->WflushFlag); - } - if (PortP->MagicFlags & MORE_OUTPUT_EYGOR) { - if (PortP->MagicFlags & MAGIC_FLUSH) { - PortP->MagicFlags |= MORE_OUTPUT_EYGOR; - } else { - if (!can_add_transmit(&PacketP, PortP)) { - rio_spin_unlock(&PortP->portSem); - continue; - } - rio_spin_unlock(&PortP->portSem); - RIOTxEnable((char *) PortP); - rio_spin_lock(&PortP->portSem); - PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR; - } - } - } - - - /* - ** If we can't add anything to the transmit queue, then - ** we need do none of the remaining processing. - */ - if (!can_add_transmit(&PacketP, PortP)) { - rio_spin_unlock(&PortP->portSem); - continue; - } - - rio_spin_unlock(&PortP->portSem); - RIOTxEnable((char *) PortP); - } - } -} - -/* -** Routine for handling received data for tty drivers -*/ -static void RIOReceive(struct rio_info *p, struct Port *PortP) -{ - struct tty_struct *TtyP; - unsigned short transCount; - struct PKT __iomem *PacketP; - register unsigned int DataCnt; - unsigned char __iomem *ptr; - unsigned char *buf; - int copied = 0; - - static int intCount, RxIntCnt; - - /* - ** The receive data process is to remove packets from the - ** PHB until there aren't any more or the current cblock - ** is full. When this occurs, there will be some left over - ** data in the packet, that we must do something with. - ** As we haven't unhooked the packet from the read list - ** yet, we can just leave the packet there, having first - ** made a note of how far we got. This means that we need - ** a pointer per port saying where we start taking the - ** data from - this will normally be zero, but when we - ** run out of space it will be set to the offset of the - ** next byte to copy from the packet data area. The packet - ** length field is decremented by the number of bytes that - ** we successfully removed from the packet. When this reaches - ** zero, we reset the offset pointer to be zero, and free - ** the packet from the front of the queue. - */ - - intCount++; - - TtyP = PortP->gs.port.tty; - if (!TtyP) { - rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: tty is null. \n"); - return; - } - - if (PortP->State & RIO_THROTTLE_RX) { - rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n"); - return; - } - - if (PortP->State & RIO_DELETED) { - while (can_remove_receive(&PacketP, PortP)) { - remove_receive(PortP); - put_free_end(PortP->HostP, PacketP); - } - } else { - /* - ** loop, just so long as: - ** i ) there's some data ( i.e. can_remove_receive ) - ** ii ) we haven't been blocked - ** iii ) there's somewhere to put the data - ** iv ) we haven't outstayed our welcome - */ - transCount = 1; - while (can_remove_receive(&PacketP, PortP) - && transCount) { - RxIntCnt++; - - /* - ** check that it is not a command! - */ - if (readb(&PacketP->len) & PKT_CMD_BIT) { - rio_dprintk(RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n"); - /* rio_dprint(RIO_DEBUG_INTR, (" sysport = %d\n", p->RIOPortp->PortNum)); */ - rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", readb(&PacketP->dest_unit)); - rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", readb(&PacketP->dest_port)); - rio_dprintk(RIO_DEBUG_INTR, " src_unit = %d\n", readb(&PacketP->src_unit)); - rio_dprintk(RIO_DEBUG_INTR, " src_port = %d\n", readb(&PacketP->src_port)); - rio_dprintk(RIO_DEBUG_INTR, " len = %d\n", readb(&PacketP->len)); - rio_dprintk(RIO_DEBUG_INTR, " control = %d\n", readb(&PacketP->control)); - rio_dprintk(RIO_DEBUG_INTR, " csum = %d\n", readw(&PacketP->csum)); - rio_dprintk(RIO_DEBUG_INTR, " data bytes: "); - for (DataCnt = 0; DataCnt < PKT_MAX_DATA_LEN; DataCnt++) - rio_dprintk(RIO_DEBUG_INTR, "%d\n", readb(&PacketP->data[DataCnt])); - remove_receive(PortP); - put_free_end(PortP->HostP, PacketP); - continue; /* with next packet */ - } - - /* - ** How many characters can we move 'upstream' ? - ** - ** Determine the minimum of the amount of data - ** available and the amount of space in which to - ** put it. - ** - ** 1. Get the packet length by masking 'len' - ** for only the length bits. - ** 2. Available space is [buffer size] - [space used] - ** - ** Transfer count is the minimum of packet length - ** and available space. - */ - - transCount = tty_buffer_request_room(TtyP, readb(&PacketP->len) & PKT_LEN_MASK); - rio_dprintk(RIO_DEBUG_REC, "port %d: Copy %d bytes\n", PortP->PortNum, transCount); - /* - ** To use the following 'kkprintfs' for debugging - change the '#undef' - ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the - ** driver). - */ - ptr = (unsigned char __iomem *) PacketP->data + PortP->RxDataStart; - - tty_prepare_flip_string(TtyP, &buf, transCount); - rio_memcpy_fromio(buf, ptr, transCount); - PortP->RxDataStart += transCount; - writeb(readb(&PacketP->len)-transCount, &PacketP->len); - copied += transCount; - - - - if (readb(&PacketP->len) == 0) { - /* - ** If we have emptied the packet, then we can - ** free it, and reset the start pointer for - ** the next packet. - */ - remove_receive(PortP); - put_free_end(PortP->HostP, PacketP); - PortP->RxDataStart = 0; - } - } - } - if (copied) { - rio_dprintk(RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied); - tty_flip_buffer_push(TtyP); - } - - return; -} - diff --git a/drivers/char/rio/rioioctl.h b/drivers/char/rio/rioioctl.h deleted file mode 100644 index e8af5b30519e..000000000000 --- a/drivers/char/rio/rioioctl.h +++ /dev/null @@ -1,57 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioioctl.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:13 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)rioioctl.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rioioctl_h__ -#define __rioioctl_h__ - -/* -** RIO device driver - user ioctls and associated structures. -*/ - -struct portStats { - int port; - int gather; - unsigned long txchars; - unsigned long rxchars; - unsigned long opens; - unsigned long closes; - unsigned long ioctls; -}; - -#define RIOC ('R'<<8)|('i'<<16)|('o'<<24) - -#define RIO_QUICK_CHECK (RIOC | 105) -#define RIO_GATHER_PORT_STATS (RIOC | 193) -#define RIO_RESET_PORT_STATS (RIOC | 194) -#define RIO_GET_PORT_STATS (RIOC | 195) - -#endif /* __rioioctl_h__ */ diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c deleted file mode 100644 index 6415f3f32a72..000000000000 --- a/drivers/char/rio/rioparam.c +++ /dev/null @@ -1,663 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioparam.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:45 -** Retrieved : 11/6/98 10:33:50 -** -** ident @(#)rioparam.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" - - - -/* -** The Scam, based on email from jeremyr@bugs.specialix.co.uk.... -** -** To send a command on a particular port, you put a packet with the -** command bit set onto the port. The command bit is in the len field, -** and gets ORed in with the actual byte count. -** -** When you send a packet with the command bit set the first -** data byte (data[0]) is interpreted as the command to execute. -** It also governs what data structure overlay should accompany the packet. -** Commands are defined in cirrus/cirrus.h -** -** If you want the command to pre-emt data already on the queue for the -** port, set the pre-emptive bit in conjunction with the command bit. -** It is not defined what will happen if you set the preemptive bit -** on a packet that is NOT a command. -** -** Pre-emptive commands should be queued at the head of the queue using -** add_start(), whereas normal commands and data are enqueued using -** add_end(). -** -** Most commands do not use the remaining bytes in the data array. The -** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and -** OPEN are currently analogous). With these three commands the following -** 11 data bytes are all used to pass config information such as baud rate etc. -** The fields are also defined in cirrus.h. Some contain straightforward -** information such as the transmit XON character. Two contain the transmit and -** receive baud rates respectively. For most baud rates there is a direct -** mapping between the rates defined in and the byte in the -** packet. There are additional (non UNIX-standard) rates defined in -** /u/dos/rio/cirrus/h/brates.h. -** -** The rest of the data fields contain approximations to the Cirrus registers -** that are used to program number of bits etc. Each registers bit fields is -** defined in cirrus.h. -** -** NB. Only use those bits that are defined as being driver specific -** or common to the RTA and the driver. -** -** All commands going from RTA->Host will be dealt with by the Host code - you -** will never see them. As with the SI there will be three fields to look out -** for in each phb (not yet defined - needs defining a.s.a.p). -** -** modem_status - current state of handshake pins. -** -** port_status - current port status - equivalent to hi_stat for SI, indicates -** if port is IDLE_OPEN, IDLE_CLOSED etc. -** -** break_status - bit X set if break has been received. -** -** Happy hacking. -** -*/ - -/* -** RIOParam is used to open or configure a port. You pass it a PortP, -** which will have a tty struct attached to it. You also pass a command, -** either OPEN or CONFIG. The port's setup is taken from the t_ fields -** of the tty struct inside the PortP, and the port is either opened -** or re-configured. You must also tell RIOParam if the device is a modem -** device or not (i.e. top bit of minor number set or clear - take special -** care when deciding on this!). -** RIOParam neither flushes nor waits for drain, and is NOT preemptive. -** -** RIOParam assumes it will be called at splrio(), and also assumes -** that CookMode is set correctly in the port structure. -** -** NB. for MPX -** tty lock must NOT have been previously acquired. -*/ -int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag) -{ - struct tty_struct *TtyP; - int retval; - struct phb_param __iomem *phb_param_ptr; - struct PKT __iomem *PacketP; - int res; - u8 Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0; - u8 TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0; - u8 LNext = 0, TxBaud = 0, RxBaud = 0; - int retries = 0xff; - unsigned long flags; - - func_enter(); - - TtyP = PortP->gs.port.tty; - - rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP); - - if (!TtyP) { - rio_dprintk(RIO_DEBUG_PARAM, "Can't call rioparam with null tty.\n"); - - func_exit(); - - return RIO_FAIL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - - if (cmd == RIOC_OPEN) { - /* - ** If the port is set to store or lock the parameters, and it is - ** paramed with OPEN, we want to restore the saved port termio, but - ** only if StoredTermio has been saved, i.e. NOT 1st open after reboot. - */ - } - - /* - ** wait for space - */ - while (!(res = can_add_transmit(&PacketP, PortP)) || (PortP->InUse != NOT_INUSE)) { - if (retries-- <= 0) { - break; - } - if (PortP->InUse != NOT_INUSE) { - rio_dprintk(RIO_DEBUG_PARAM, "Port IN_USE for pre-emptive command\n"); - } - - if (!res) { - rio_dprintk(RIO_DEBUG_PARAM, "Port has no space on transmit queue\n"); - } - - if (SleepFlag != OK_TO_SLEEP) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - - return RIO_FAIL; - } - - rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - retval = RIODelay(PortP, HUNDRED_MS); - rio_spin_lock_irqsave(&PortP->portSem, flags); - if (retval == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - return -EINTR; - } - if (PortP->State & RIO_DELETED) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - return 0; - } - } - - if (!res) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - - return RIO_FAIL; - } - - rio_dprintk(RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n", res); - rio_dprintk(RIO_DEBUG_PARAM, "Packet is %p\n", PacketP); - - phb_param_ptr = (struct phb_param __iomem *) PacketP->data; - - - switch (TtyP->termios->c_cflag & CSIZE) { - case CS5: - { - rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n"); - Cor1 |= RIOC_COR1_5BITS; - break; - } - case CS6: - { - rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n"); - Cor1 |= RIOC_COR1_6BITS; - break; - } - case CS7: - { - rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n"); - Cor1 |= RIOC_COR1_7BITS; - break; - } - case CS8: - { - rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n"); - Cor1 |= RIOC_COR1_8BITS; - break; - } - } - - if (TtyP->termios->c_cflag & CSTOPB) { - rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n"); - Cor1 |= RIOC_COR1_2STOP; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n"); - Cor1 |= RIOC_COR1_1STOP; - } - - if (TtyP->termios->c_cflag & PARENB) { - rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n"); - Cor1 |= RIOC_COR1_NORMAL; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n"); - Cor1 |= RIOC_COR1_NOP; - } - if (TtyP->termios->c_cflag & PARODD) { - rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n"); - Cor1 |= RIOC_COR1_ODD; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n"); - Cor1 |= RIOC_COR1_EVEN; - } - - /* - ** COR 2 - */ - if (TtyP->termios->c_iflag & IXON) { - rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n"); - Cor2 |= RIOC_COR2_IXON; - } else { - if (PortP->Config & RIO_IXON) { - rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n"); - Cor2 |= RIOC_COR2_IXON; - } else - rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n"); - } - - if (TtyP->termios->c_iflag & IXANY) { - if (PortP->Config & RIO_IXANY) { - rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n"); - Cor2 |= RIOC_COR2_IXANY; - } else - rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n"); - } - - if (TtyP->termios->c_iflag & IXOFF) { - rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n"); - Cor2 |= RIOC_COR2_IXOFF; - } - - if (TtyP->termios->c_cflag & HUPCL) { - rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n"); - Cor2 |= RIOC_COR2_HUPCL; - } - - if (C_CRTSCTS(TtyP)) { - rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n"); - Cor2 |= RIOC_COR2_CTSFLOW; - Cor2 |= RIOC_COR2_RTSFLOW; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n"); - Cor2 &= ~RIOC_COR2_CTSFLOW; - Cor2 &= ~RIOC_COR2_RTSFLOW; - } - - - if (TtyP->termios->c_cflag & CLOCAL) { - rio_dprintk(RIO_DEBUG_PARAM, "Local line\n"); - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Possible Modem line\n"); - } - - /* - ** COR 4 (there is no COR 3) - */ - if (TtyP->termios->c_iflag & IGNBRK) { - rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n"); - Cor4 |= RIOC_COR4_IGNBRK; - } - if (!(TtyP->termios->c_iflag & BRKINT)) { - rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n"); - Cor4 |= RIOC_COR4_NBRKINT; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on break condition\n"); - } - - if (TtyP->termios->c_iflag & INLCR) { - rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n"); - Cor4 |= RIOC_COR4_INLCR; - } - - if (TtyP->termios->c_iflag & IGNCR) { - rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n"); - Cor4 |= RIOC_COR4_IGNCR; - } - - if (TtyP->termios->c_iflag & ICRNL) { - rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n"); - Cor4 |= RIOC_COR4_ICRNL; - } - if (TtyP->termios->c_iflag & IGNPAR) { - rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n"); - Cor4 |= RIOC_COR4_IGNPAR; - } - if (TtyP->termios->c_iflag & PARMRK) { - rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n"); - Cor4 |= RIOC_COR4_PARMRK; - } - - /* - ** Set the RAISEMOD flag to ensure that the modem lines are raised - ** on reception of a config packet. - ** The download code handles the zero baud condition. - */ - Cor4 |= RIOC_COR4_RAISEMOD; - - /* - ** COR 5 - */ - - Cor5 = RIOC_COR5_CMOE; - - /* - ** Set to monitor tbusy/tstop (or not). - */ - - if (PortP->MonitorTstate) - Cor5 |= RIOC_COR5_TSTATE_ON; - else - Cor5 |= RIOC_COR5_TSTATE_OFF; - - /* - ** Could set LNE here if you wanted LNext processing. SVR4 will use it. - */ - if (TtyP->termios->c_iflag & ISTRIP) { - rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n"); - if (!(PortP->State & RIO_TRIAD_MODE)) { - Cor5 |= RIOC_COR5_ISTRIP; - } - } - - if (TtyP->termios->c_oflag & ONLCR) { - rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n"); - if (PortP->CookMode == COOK_MEDIUM) - Cor5 |= RIOC_COR5_ONLCR; - } - if (TtyP->termios->c_oflag & OCRNL) { - rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n"); - if (PortP->CookMode == COOK_MEDIUM) - Cor5 |= RIOC_COR5_OCRNL; - } - if ((TtyP->termios->c_oflag & TABDLY) == TAB3) { - rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n"); - if (PortP->CookMode == COOK_MEDIUM) - Cor5 |= RIOC_COR5_TAB3; - } - - /* - ** Flow control bytes. - */ - TxXon = TtyP->termios->c_cc[VSTART]; - TxXoff = TtyP->termios->c_cc[VSTOP]; - RxXon = TtyP->termios->c_cc[VSTART]; - RxXoff = TtyP->termios->c_cc[VSTOP]; - /* - ** LNEXT byte - */ - LNext = 0; - - /* - ** Baud rate bytes - */ - rio_dprintk(RIO_DEBUG_PARAM, "Mapping of rx/tx baud %x (%x)\n", TtyP->termios->c_cflag, CBAUD); - - switch (TtyP->termios->c_cflag & CBAUD) { -#define e(b) case B ## b : RxBaud = TxBaud = RIO_B ## b ;break - e(50); - e(75); - e(110); - e(134); - e(150); - e(200); - e(300); - e(600); - e(1200); - e(1800); - e(2400); - e(4800); - e(9600); - e(19200); - e(38400); - e(57600); - e(115200); /* e(230400);e(460800); e(921600); */ - } - - rio_dprintk(RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud); - - - /* - ** Leftovers - */ - if (TtyP->termios->c_cflag & CREAD) - rio_dprintk(RIO_DEBUG_PARAM, "Enable receiver\n"); -#ifdef RCV1EN - if (TtyP->termios->c_cflag & RCV1EN) - rio_dprintk(RIO_DEBUG_PARAM, "RCV1EN (?)\n"); -#endif -#ifdef XMT1EN - if (TtyP->termios->c_cflag & XMT1EN) - rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n"); -#endif - if (TtyP->termios->c_lflag & ISIG) - rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n"); - if (TtyP->termios->c_lflag & ICANON) - rio_dprintk(RIO_DEBUG_PARAM, "Canonical input: erase and kill enabled\n"); - if (TtyP->termios->c_lflag & XCASE) - rio_dprintk(RIO_DEBUG_PARAM, "Canonical upper/lower presentation\n"); - if (TtyP->termios->c_lflag & ECHO) - rio_dprintk(RIO_DEBUG_PARAM, "Enable input echo\n"); - if (TtyP->termios->c_lflag & ECHOE) - rio_dprintk(RIO_DEBUG_PARAM, "Enable echo erase\n"); - if (TtyP->termios->c_lflag & ECHOK) - rio_dprintk(RIO_DEBUG_PARAM, "Enable echo kill\n"); - if (TtyP->termios->c_lflag & ECHONL) - rio_dprintk(RIO_DEBUG_PARAM, "Enable echo newline\n"); - if (TtyP->termios->c_lflag & NOFLSH) - rio_dprintk(RIO_DEBUG_PARAM, "Disable flush after interrupt or quit\n"); -#ifdef TOSTOP - if (TtyP->termios->c_lflag & TOSTOP) - rio_dprintk(RIO_DEBUG_PARAM, "Send SIGTTOU for background output\n"); -#endif -#ifdef XCLUDE - if (TtyP->termios->c_lflag & XCLUDE) - rio_dprintk(RIO_DEBUG_PARAM, "Exclusive use of this line\n"); -#endif - if (TtyP->termios->c_iflag & IUCLC) - rio_dprintk(RIO_DEBUG_PARAM, "Map uppercase to lowercase on input\n"); - if (TtyP->termios->c_oflag & OPOST) - rio_dprintk(RIO_DEBUG_PARAM, "Enable output post-processing\n"); - if (TtyP->termios->c_oflag & OLCUC) - rio_dprintk(RIO_DEBUG_PARAM, "Map lowercase to uppercase on output\n"); - if (TtyP->termios->c_oflag & ONOCR) - rio_dprintk(RIO_DEBUG_PARAM, "No carriage return output at column 0\n"); - if (TtyP->termios->c_oflag & ONLRET) - rio_dprintk(RIO_DEBUG_PARAM, "Newline performs carriage return function\n"); - if (TtyP->termios->c_oflag & OFILL) - rio_dprintk(RIO_DEBUG_PARAM, "Use fill characters for delay\n"); - if (TtyP->termios->c_oflag & OFDEL) - rio_dprintk(RIO_DEBUG_PARAM, "Fill character is DEL\n"); - if (TtyP->termios->c_oflag & NLDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Newline delay set\n"); - if (TtyP->termios->c_oflag & CRDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n"); - if (TtyP->termios->c_oflag & TABDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n"); - /* - ** These things are kind of useful in a later life! - */ - PortP->Cor2Copy = Cor2; - - if (PortP->State & RIO_DELETED) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - - return RIO_FAIL; - } - - /* - ** Actually write the info into the packet to be sent - */ - writeb(cmd, &phb_param_ptr->Cmd); - writeb(Cor1, &phb_param_ptr->Cor1); - writeb(Cor2, &phb_param_ptr->Cor2); - writeb(Cor4, &phb_param_ptr->Cor4); - writeb(Cor5, &phb_param_ptr->Cor5); - writeb(TxXon, &phb_param_ptr->TxXon); - writeb(RxXon, &phb_param_ptr->RxXon); - writeb(TxXoff, &phb_param_ptr->TxXoff); - writeb(RxXoff, &phb_param_ptr->RxXoff); - writeb(LNext, &phb_param_ptr->LNext); - writeb(TxBaud, &phb_param_ptr->TxBaud); - writeb(RxBaud, &phb_param_ptr->RxBaud); - - /* - ** Set the length/command field - */ - writeb(12 | PKT_CMD_BIT, &PacketP->len); - - /* - ** The packet is formed - now, whack it off - ** to its final destination: - */ - add_transmit(PortP); - /* - ** Count characters transmitted for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += 12; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - rio_dprintk(RIO_DEBUG_PARAM, "add_transmit returned.\n"); - /* - ** job done. - */ - func_exit(); - - return 0; -} - - -/* -** We can add another packet to a transmit queue if the packet pointer pointed -** to by the TxAdd pointer has PKT_IN_USE clear in its address. -*/ -int can_add_transmit(struct PKT __iomem **PktP, struct Port *PortP) -{ - struct PKT __iomem *tp; - - *PktP = tp = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->TxAdd)); - - return !((unsigned long) tp & PKT_IN_USE); -} - -/* -** To add a packet to the queue, you set the PKT_IN_USE bit in the address, -** and then move the TxAdd pointer along one position to point to the next -** packet pointer. You must wrap the pointer from the end back to the start. -*/ -void add_transmit(struct Port *PortP) -{ - if (readw(PortP->TxAdd) & PKT_IN_USE) { - rio_dprintk(RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!"); - } - writew(readw(PortP->TxAdd) | PKT_IN_USE, PortP->TxAdd); - PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : PortP->TxAdd + 1; - writew(RIO_OFF(PortP->Caddr, PortP->TxAdd), &PortP->PhbP->tx_add); -} - -/**************************************** - * Put a packet onto the end of the - * free list - ****************************************/ -void put_free_end(struct Host *HostP, struct PKT __iomem *PktP) -{ - struct rio_free_list __iomem *tmp_pointer; - unsigned short old_end, new_end; - unsigned long flags; - - rio_spin_lock_irqsave(&HostP->HostLock, flags); - - /************************************************* - * Put a packet back onto the back of the free list - * - ************************************************/ - - rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%p)\n", PktP); - - if ((old_end = readw(&HostP->ParmMapP->free_list_end)) != TPNULL) { - new_end = RIO_OFF(HostP->Caddr, PktP); - tmp_pointer = (struct rio_free_list __iomem *) RIO_PTR(HostP->Caddr, old_end); - writew(new_end, &tmp_pointer->next); - writew(old_end, &((struct rio_free_list __iomem *) PktP)->prev); - writew(TPNULL, &((struct rio_free_list __iomem *) PktP)->next); - writew(new_end, &HostP->ParmMapP->free_list_end); - } else { /* First packet on the free list this should never happen! */ - rio_dprintk(RIO_DEBUG_PFE, "put_free_end(): This should never happen\n"); - writew(RIO_OFF(HostP->Caddr, PktP), &HostP->ParmMapP->free_list_end); - tmp_pointer = (struct rio_free_list __iomem *) PktP; - writew(TPNULL, &tmp_pointer->prev); - writew(TPNULL, &tmp_pointer->next); - } - rio_dprintk(RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock); - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); -} - -/* -** can_remove_receive(PktP,P) returns non-zero if PKT_IN_USE is set -** for the next packet on the queue. It will also set PktP to point to the -** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear, -** then can_remove_receive() returns 0. -*/ -int can_remove_receive(struct PKT __iomem **PktP, struct Port *PortP) -{ - if (readw(PortP->RxRemove) & PKT_IN_USE) { - *PktP = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->RxRemove) & ~PKT_IN_USE); - return 1; - } - return 0; -} - -/* -** To remove a packet from the receive queue you clear its PKT_IN_USE bit, -** and then bump the pointers. Once the pointers get to the end, they must -** be wrapped back to the start. -*/ -void remove_receive(struct Port *PortP) -{ - writew(readw(PortP->RxRemove) & ~PKT_IN_USE, PortP->RxRemove); - PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : PortP->RxRemove + 1; - writew(RIO_OFF(PortP->Caddr, PortP->RxRemove), &PortP->PhbP->rx_remove); -} diff --git a/drivers/char/rio/rioroute.c b/drivers/char/rio/rioroute.c deleted file mode 100644 index f9b936ac3394..000000000000 --- a/drivers/char/rio/rioroute.c +++ /dev/null @@ -1,1039 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioroute.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:46 -** Retrieved : 11/6/98 10:33:50 -** -** ident @(#)rioroute.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" - -static int RIOCheckIsolated(struct rio_info *, struct Host *, unsigned int); -static int RIOIsolate(struct rio_info *, struct Host *, unsigned int); -static int RIOCheck(struct Host *, unsigned int); -static void RIOConCon(struct rio_info *, struct Host *, unsigned int, unsigned int, unsigned int, unsigned int, int); - - -/* -** Incoming on the ROUTE_RUP -** I wrote this while I was tired. Forgive me. -*/ -int RIORouteRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem * PacketP) -{ - struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data; - struct PktCmd_M *PktReplyP; - struct CmdBlk *CmdBlkP; - struct Port *PortP; - struct Map *MapP; - struct Top *TopP; - int ThisLink, ThisLinkMin, ThisLinkMax; - int port; - int Mod, Mod1, Mod2; - unsigned short RtaType; - unsigned int RtaUniq; - unsigned int ThisUnit, ThisUnit2; /* 2 ids to accommodate 16 port RTA */ - unsigned int OldUnit, NewUnit, OldLink, NewLink; - char *MyType, *MyName; - int Lies; - unsigned long flags; - - /* - ** Is this unit telling us it's current link topology? - */ - if (readb(&PktCmdP->Command) == ROUTE_TOPOLOGY) { - MapP = HostP->Mapping; - - /* - ** The packet can be sent either by the host or by an RTA. - ** If it comes from the host, then we need to fill in the - ** Topology array in the host structure. If it came in - ** from an RTA then we need to fill in the Mapping structure's - ** Topology array for the unit. - */ - if (Rup >= (unsigned short) MAX_RUP) { - ThisUnit = HOST_ID; - TopP = HostP->Topology; - MyType = "Host"; - MyName = HostP->Name; - ThisLinkMin = ThisLinkMax = Rup - MAX_RUP; - } else { - ThisUnit = Rup + 1; - TopP = HostP->Mapping[Rup].Topology; - MyType = "RTA"; - MyName = HostP->Mapping[Rup].Name; - ThisLinkMin = 0; - ThisLinkMax = LINKS_PER_UNIT - 1; - } - - /* - ** Lies will not be tolerated. - ** If any pair of links claim to be connected to the same - ** place, then ignore this packet completely. - */ - Lies = 0; - for (ThisLink = ThisLinkMin + 1; ThisLink <= ThisLinkMax; ThisLink++) { - /* - ** it won't lie about network interconnect, total disconnects - ** and no-IDs. (or at least, it doesn't *matter* if it does) - */ - if (readb(&PktCmdP->RouteTopology[ThisLink].Unit) > (unsigned short) MAX_RUP) - continue; - - for (NewLink = ThisLinkMin; NewLink < ThisLink; NewLink++) { - if ((readb(&PktCmdP->RouteTopology[ThisLink].Unit) == readb(&PktCmdP->RouteTopology[NewLink].Unit)) && (readb(&PktCmdP->RouteTopology[ThisLink].Link) == readb(&PktCmdP->RouteTopology[NewLink].Link))) { - Lies++; - } - } - } - - if (Lies) { - rio_dprintk(RIO_DEBUG_ROUTE, "LIES! DAMN LIES! %d LIES!\n", Lies); - rio_dprintk(RIO_DEBUG_ROUTE, "%d:%c %d:%c %d:%c %d:%c\n", - readb(&PktCmdP->RouteTopology[0].Unit), - 'A' + readb(&PktCmdP->RouteTopology[0].Link), - readb(&PktCmdP->RouteTopology[1].Unit), - 'A' + readb(&PktCmdP->RouteTopology[1].Link), readb(&PktCmdP->RouteTopology[2].Unit), 'A' + readb(&PktCmdP->RouteTopology[2].Link), readb(&PktCmdP->RouteTopology[3].Unit), 'A' + readb(&PktCmdP->RouteTopology[3].Link)); - return 1; - } - - /* - ** now, process each link. - */ - for (ThisLink = ThisLinkMin; ThisLink <= ThisLinkMax; ThisLink++) { - /* - ** this is what it was connected to - */ - OldUnit = TopP[ThisLink].Unit; - OldLink = TopP[ThisLink].Link; - - /* - ** this is what it is now connected to - */ - NewUnit = readb(&PktCmdP->RouteTopology[ThisLink].Unit); - NewLink = readb(&PktCmdP->RouteTopology[ThisLink].Link); - - if (OldUnit != NewUnit || OldLink != NewLink) { - /* - ** something has changed! - */ - - if (NewUnit > MAX_RUP && NewUnit != ROUTE_DISCONNECT && NewUnit != ROUTE_NO_ID && NewUnit != ROUTE_INTERCONNECT) { - rio_dprintk(RIO_DEBUG_ROUTE, "I have a link from %s %s to unit %d:%d - I don't like it.\n", MyType, MyName, NewUnit, NewLink); - } else { - /* - ** put the new values in - */ - TopP[ThisLink].Unit = NewUnit; - TopP[ThisLink].Link = NewLink; - - RIOSetChange(p); - - if (OldUnit <= MAX_RUP) { - /* - ** If something has become bust, then re-enable them messages - */ - if (!p->RIONoMessage) - RIOConCon(p, HostP, ThisUnit, ThisLink, OldUnit, OldLink, DISCONNECT); - } - - if ((NewUnit <= MAX_RUP) && !p->RIONoMessage) - RIOConCon(p, HostP, ThisUnit, ThisLink, NewUnit, NewLink, CONNECT); - - if (NewUnit == ROUTE_NO_ID) - rio_dprintk(RIO_DEBUG_ROUTE, "%s %s (%c) is connected to an unconfigured unit.\n", MyType, MyName, 'A' + ThisLink); - - if (NewUnit == ROUTE_INTERCONNECT) { - if (!p->RIONoMessage) - printk(KERN_DEBUG "rio: %s '%s' (%c) is connected to another network.\n", MyType, MyName, 'A' + ThisLink); - } - - /* - ** perform an update for 'the other end', so that these messages - ** only appears once. Only disconnect the other end if it is pointing - ** at us! - */ - if (OldUnit == HOST_ID) { - if (HostP->Topology[OldLink].Unit == ThisUnit && HostP->Topology[OldLink].Link == ThisLink) { - rio_dprintk(RIO_DEBUG_ROUTE, "SETTING HOST (%c) TO DISCONNECTED!\n", OldLink + 'A'); - HostP->Topology[OldLink].Unit = ROUTE_DISCONNECT; - HostP->Topology[OldLink].Link = NO_LINK; - } else { - rio_dprintk(RIO_DEBUG_ROUTE, "HOST(%c) WAS NOT CONNECTED TO %s (%c)!\n", OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A'); - } - } else if (OldUnit <= MAX_RUP) { - if (HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit == ThisUnit && HostP->Mapping[OldUnit - 1].Topology[OldLink].Link == ThisLink) { - rio_dprintk(RIO_DEBUG_ROUTE, "SETTING RTA %s (%c) TO DISCONNECTED!\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A'); - HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit = ROUTE_DISCONNECT; - HostP->Mapping[OldUnit - 1].Topology[OldLink].Link = NO_LINK; - } else { - rio_dprintk(RIO_DEBUG_ROUTE, "RTA %s (%c) WAS NOT CONNECTED TO %s (%c)\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A'); - } - } - if (NewUnit == HOST_ID) { - rio_dprintk(RIO_DEBUG_ROUTE, "MARKING HOST (%c) CONNECTED TO %s (%c)\n", NewLink + 'A', MyName, ThisLink + 'A'); - HostP->Topology[NewLink].Unit = ThisUnit; - HostP->Topology[NewLink].Link = ThisLink; - } else if (NewUnit <= MAX_RUP) { - rio_dprintk(RIO_DEBUG_ROUTE, "MARKING RTA %s (%c) CONNECTED TO %s (%c)\n", HostP->Mapping[NewUnit - 1].Name, NewLink + 'A', MyName, ThisLink + 'A'); - HostP->Mapping[NewUnit - 1].Topology[NewLink].Unit = ThisUnit; - HostP->Mapping[NewUnit - 1].Topology[NewLink].Link = ThisLink; - } - } - RIOSetChange(p); - RIOCheckIsolated(p, HostP, OldUnit); - } - } - return 1; - } - - /* - ** The only other command we recognise is a route_request command - */ - if (readb(&PktCmdP->Command) != ROUTE_REQUEST) { - rio_dprintk(RIO_DEBUG_ROUTE, "Unknown command %d received on rup %d host %p ROUTE_RUP\n", readb(&PktCmdP->Command), Rup, HostP); - return 1; - } - - RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24); - - /* - ** Determine if 8 or 16 port RTA - */ - RtaType = GetUnitType(RtaUniq); - - rio_dprintk(RIO_DEBUG_ROUTE, "Received a request for an ID for serial number %x\n", RtaUniq); - - Mod = readb(&PktCmdP->ModuleTypes); - Mod1 = LONYBLE(Mod); - if (RtaType == TYPE_RTA16) { - /* - ** Only one ident is set for a 16 port RTA. To make compatible - ** with 8 port, set 2nd ident in Mod2 to the same as Mod1. - */ - Mod2 = Mod1; - rio_dprintk(RIO_DEBUG_ROUTE, "Backplane type is %s (all ports)\n", p->RIOModuleTypes[Mod1].Name); - } else { - Mod2 = HINYBLE(Mod); - rio_dprintk(RIO_DEBUG_ROUTE, "Module types are %s (ports 0-3) and %s (ports 4-7)\n", p->RIOModuleTypes[Mod1].Name, p->RIOModuleTypes[Mod2].Name); - } - - /* - ** try to unhook a command block from the command free list. - */ - if (!(CmdBlkP = RIOGetCmdBlk())) { - rio_dprintk(RIO_DEBUG_ROUTE, "No command blocks to route RTA! come back later.\n"); - return 0; - } - - /* - ** Fill in the default info on the command block - */ - CmdBlkP->Packet.dest_unit = Rup; - CmdBlkP->Packet.dest_port = ROUTE_RUP; - CmdBlkP->Packet.src_unit = HOST_ID; - CmdBlkP->Packet.src_port = ROUTE_RUP; - CmdBlkP->Packet.len = PKT_CMD_BIT | 1; - CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; - PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data; - - if (!RIOBootOk(p, HostP, RtaUniq)) { - rio_dprintk(RIO_DEBUG_ROUTE, "RTA %x tried to get an ID, but does not belong - FOAD it!\n", RtaUniq); - PktReplyP->Command = ROUTE_FOAD; - memcpy(PktReplyP->CommandText, "RT_FOAD", 7); - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; - } - - /* - ** Check to see if the RTA is configured for this host - */ - for (ThisUnit = 0; ThisUnit < MAX_RUP; ThisUnit++) { - rio_dprintk(RIO_DEBUG_ROUTE, "Entry %d Flags=%s %s UniqueNum=0x%x\n", - ThisUnit, HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE ? "Slot-In-Use" : "Not In Use", HostP->Mapping[ThisUnit].Flags & SLOT_TENTATIVE ? "Slot-Tentative" : "Not Tentative", HostP->Mapping[ThisUnit].RtaUniqueNum); - - /* - ** We have an entry for it. - */ - if ((HostP->Mapping[ThisUnit].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (HostP->Mapping[ThisUnit].RtaUniqueNum == RtaUniq)) { - if (RtaType == TYPE_RTA16) { - ThisUnit2 = HostP->Mapping[ThisUnit].ID2 - 1; - rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slots %d+%d\n", RtaUniq, ThisUnit, ThisUnit2); - } else - rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slot %d\n", RtaUniq, ThisUnit); - /* - ** If we have no knowledge of booting it, then the host has - ** been re-booted, and so we must kill the RTA, so that it - ** will be booted again (potentially with new bins) - ** and it will then re-ask for an ID, which we will service. - */ - if ((HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) && !(HostP->Mapping[ThisUnit].Flags & RTA_BOOTED)) { - if (!(HostP->Mapping[ThisUnit].Flags & MSG_DONE)) { - if (!p->RIONoMessage) - printk(KERN_DEBUG "rio: RTA '%s' is being updated.\n", HostP->Mapping[ThisUnit].Name); - HostP->Mapping[ThisUnit].Flags |= MSG_DONE; - } - PktReplyP->Command = ROUTE_FOAD; - memcpy(PktReplyP->CommandText, "RT_FOAD", 7); - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; - } - - /* - ** Send the ID (entry) to this RTA. The ID number is implicit as - ** the offset into the table. It is worth noting at this stage - ** that offset zero in the table contains the entries for the - ** RTA with ID 1!!!! - */ - PktReplyP->Command = ROUTE_ALLOCATE; - PktReplyP->IDNum = ThisUnit + 1; - if (RtaType == TYPE_RTA16) { - if (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) - /* - ** Adjust the phb and tx pkt dest_units for 2nd block of 8 - ** only if the RTA has ports associated (SLOT_IN_USE) - */ - RIOFixPhbs(p, HostP, ThisUnit2); - PktReplyP->IDNum2 = ThisUnit2 + 1; - rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated IDs %d+%d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum, PktReplyP->IDNum2); - } else { - PktReplyP->IDNum2 = ROUTE_NO_ID; - rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated ID %d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum); - } - memcpy(PktReplyP->CommandText, "RT_ALLOCAT", 10); - - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - - /* - ** If this is a freshly booted RTA, then we need to re-open - ** the ports, if any where open, so that data may once more - ** flow around the system! - */ - if ((HostP->Mapping[ThisUnit].Flags & RTA_NEWBOOT) && (HostP->Mapping[ThisUnit].SysPort != NO_PORT)) { - /* - ** look at the ports associated with this beast and - ** see if any where open. If they was, then re-open - ** them, using the info from the tty flags. - */ - for (port = 0; port < PORTS_PER_RTA; port++) { - PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]; - if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { - rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n"); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->MagicFlags |= MAGIC_REBOOT; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - } - if (RtaType == TYPE_RTA16) { - for (port = 0; port < PORTS_PER_RTA; port++) { - PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]; - if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { - rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n"); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->MagicFlags |= MAGIC_REBOOT; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - } - } - } - - /* - ** keep a copy of the module types! - */ - HostP->UnixRups[ThisUnit].ModTypes = Mod; - if (RtaType == TYPE_RTA16) - HostP->UnixRups[ThisUnit2].ModTypes = Mod; - - /* - ** If either of the modules on this unit is read-only or write-only - ** or none-xprint, then we need to transfer that info over to the - ** relevant ports. - */ - if (HostP->Mapping[ThisUnit].SysPort != NO_PORT) { - for (port = 0; port < PORTS_PER_MODULE; port++) { - p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; - p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; - } - if (RtaType == TYPE_RTA16) { - for (port = 0; port < PORTS_PER_MODULE; port++) { - p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; - p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; - } - } - } - - /* - ** Job done, get on with the interrupts! - */ - return 1; - } - } - /* - ** There is no table entry for this RTA at all. - ** - ** Lets check to see if we actually booted this unit - if not, - ** then we reset it and it will go round the loop of being booted - ** we can then worry about trying to fit it into the table. - */ - for (ThisUnit = 0; ThisUnit < HostP->NumExtraBooted; ThisUnit++) - if (HostP->ExtraUnits[ThisUnit] == RtaUniq) - break; - if (ThisUnit == HostP->NumExtraBooted && ThisUnit != MAX_EXTRA_UNITS) { - /* - ** if the unit wasn't in the table, and the table wasn't full, then - ** we reset the unit, because we didn't boot it. - ** However, if the table is full, it could be that we did boot - ** this unit, and so we won't reboot it, because it isn't really - ** all that disasterous to keep the old bins in most cases. This - ** is a rather tacky feature, but we are on the edge of reallity - ** here, because the implication is that someone has connected - ** 16+MAX_EXTRA_UNITS onto one host. - */ - static int UnknownMesgDone = 0; - - if (!UnknownMesgDone) { - if (!p->RIONoMessage) - printk(KERN_DEBUG "rio: One or more unknown RTAs are being updated.\n"); - UnknownMesgDone = 1; - } - - PktReplyP->Command = ROUTE_FOAD; - memcpy(PktReplyP->CommandText, "RT_FOAD", 7); - } else { - /* - ** we did boot it (as an extra), and there may now be a table - ** slot free (because of a delete), so we will try to make - ** a tentative entry for it, so that the configurator can see it - ** and fill in the details for us. - */ - if (RtaType == TYPE_RTA16) { - if (RIOFindFreeID(p, HostP, &ThisUnit, &ThisUnit2) == 0) { - RIODefaultName(p, HostP, ThisUnit); - rio_fill_host_slot(ThisUnit, ThisUnit2, RtaUniq, HostP); - } - } else { - if (RIOFindFreeID(p, HostP, &ThisUnit, NULL) == 0) { - RIODefaultName(p, HostP, ThisUnit); - rio_fill_host_slot(ThisUnit, 0, RtaUniq, HostP); - } - } - PktReplyP->Command = ROUTE_USED; - memcpy(PktReplyP->CommandText, "RT_USED", 7); - } - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; -} - - -void RIOFixPhbs(struct rio_info *p, struct Host *HostP, unsigned int unit) -{ - unsigned short link, port; - struct Port *PortP; - unsigned long flags; - int PortN = HostP->Mapping[unit].SysPort; - - rio_dprintk(RIO_DEBUG_ROUTE, "RIOFixPhbs unit %d sysport %d\n", unit, PortN); - - if (PortN != -1) { - unsigned short dest_unit = HostP->Mapping[unit].ID2; - - /* - ** Get the link number used for the 1st 8 phbs on this unit. - */ - PortP = p->RIOPortp[HostP->Mapping[dest_unit - 1].SysPort]; - - link = readw(&PortP->PhbP->link); - - for (port = 0; port < PORTS_PER_RTA; port++, PortN++) { - unsigned short dest_port = port + 8; - u16 __iomem *TxPktP; - struct PKT __iomem *Pkt; - - PortP = p->RIOPortp[PortN]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - /* - ** If RTA is not powered on, the tx packets will be - ** unset, so go no further. - */ - if (!PortP->TxStart) { - rio_dprintk(RIO_DEBUG_ROUTE, "Tx pkts not set up yet\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - break; - } - - /* - ** For the second slot of a 16 port RTA, the driver needs to - ** sort out the phb to port mappings. The dest_unit for this - ** group of 8 phbs is set to the dest_unit of the accompanying - ** 8 port block. The dest_port of the second unit is set to - ** be in the range 8-15 (i.e. 8 is added). Thus, for a 16 port - ** RTA with IDs 5 and 6, traffic bound for port 6 of unit 6 - ** (being the second map ID) will be sent to dest_unit 5, port - ** 14. When this RTA is deleted, dest_unit for ID 6 will be - ** restored, and the dest_port will be reduced by 8. - ** Transmit packets also have a destination field which needs - ** adjusting in the same manner. - ** Note that the unit/port bytes in 'dest' are swapped. - ** We also need to adjust the phb and rup link numbers for the - ** second block of 8 ttys. - */ - for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) { - /* - ** *TxPktP is the pointer to the transmit packet on the host - ** card. This needs to be translated into a 32 bit pointer - ** so it can be accessed from the driver. - */ - Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(TxPktP)); - - /* - ** If the packet is used, reset it. - */ - Pkt = (struct PKT __iomem *) ((unsigned long) Pkt & ~PKT_IN_USE); - writeb(dest_unit, &Pkt->dest_unit); - writeb(dest_port, &Pkt->dest_port); - } - rio_dprintk(RIO_DEBUG_ROUTE, "phb dest: Old %x:%x New %x:%x\n", readw(&PortP->PhbP->destination) & 0xff, (readw(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port); - writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination); - writew(link, &PortP->PhbP->link); - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - /* - ** Now make sure the range of ports to be serviced includes - ** the 2nd 8 on this 16 port RTA. - */ - if (link > 3) - return; - if (((unit * 8) + 7) > readw(&HostP->LinkStrP[link].last_port)) { - rio_dprintk(RIO_DEBUG_ROUTE, "last port on host link %d: %d\n", link, (unit * 8) + 7); - writew((unit * 8) + 7, &HostP->LinkStrP[link].last_port); - } - } -} - -/* -** Check to see if the new disconnection has isolated this unit. -** If it has, then invalidate all its link information, and tell -** the world about it. This is done to ensure that the configurator -** only gets up-to-date information about what is going on. -*/ -static int RIOCheckIsolated(struct rio_info *p, struct Host *HostP, unsigned int UnitId) -{ - unsigned long flags; - rio_spin_lock_irqsave(&HostP->HostLock, flags); - - if (RIOCheck(HostP, UnitId)) { - rio_dprintk(RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId); - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - return (0); - } - - RIOIsolate(p, HostP, UnitId); - RIOSetChange(p); - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - return 1; -} - -/* -** Invalidate all the link interconnectivity of this unit, and of -** all the units attached to it. This will mean that the entire -** subnet will re-introduce itself. -*/ -static int RIOIsolate(struct rio_info *p, struct Host *HostP, unsigned int UnitId) -{ - unsigned int link, unit; - - UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */ - - if (UnitId >= MAX_RUP) /* dontcha just lurv unsigned maths! */ - return (0); - - if (HostP->Mapping[UnitId].Flags & BEEN_HERE) - return (0); - - HostP->Mapping[UnitId].Flags |= BEEN_HERE; - - if (p->RIOPrintDisabled == DO_PRINT) - rio_dprintk(RIO_DEBUG_ROUTE, "RIOMesgIsolated %s", HostP->Mapping[UnitId].Name); - - for (link = 0; link < LINKS_PER_UNIT; link++) { - unit = HostP->Mapping[UnitId].Topology[link].Unit; - HostP->Mapping[UnitId].Topology[link].Unit = ROUTE_DISCONNECT; - HostP->Mapping[UnitId].Topology[link].Link = NO_LINK; - RIOIsolate(p, HostP, unit); - } - HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; - return 1; -} - -static int RIOCheck(struct Host *HostP, unsigned int UnitId) -{ - unsigned char link; - -/* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */ - rio_dprintk(RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId); - - if (UnitId == HOST_ID) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is NOT isolated - it IS the host!\n", UnitId)); */ - return 1; - } - - UnitId--; - - if (UnitId >= MAX_RUP) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d - ignored.\n", UnitId)); */ - return 0; - } - - for (link = 0; link < LINKS_PER_UNIT; link++) { - if (HostP->Mapping[UnitId].Topology[link].Unit == HOST_ID) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected directly to host via link (%c).\n", - UnitId, 'A'+link)); */ - return 1; - } - } - - if (HostP->Mapping[UnitId].Flags & BEEN_HERE) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Been to Unit %d before - ignoring\n", UnitId)); */ - return 0; - } - - HostP->Mapping[UnitId].Flags |= BEEN_HERE; - - for (link = 0; link < LINKS_PER_UNIT; link++) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d check link (%c)\n", UnitId,'A'+link)); */ - if (RIOCheck(HostP, HostP->Mapping[UnitId].Topology[link].Unit)) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected to something that knows the host via link (%c)\n", UnitId,link+'A')); */ - HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; - return 1; - } - } - - HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; - - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESNT KNOW THE HOST!\n", UnitId)); */ - - return 0; -} - -/* -** Returns the type of unit (host, 16/8 port RTA) -*/ - -unsigned int GetUnitType(unsigned int Uniq) -{ - switch ((Uniq >> 28) & 0xf) { - case RIO_AT: - case RIO_MCA: - case RIO_EISA: - case RIO_PCI: - rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Host\n"); - return (TYPE_HOST); - case RIO_RTA_16: - rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 16 port RTA\n"); - return (TYPE_RTA16); - case RIO_RTA: - rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 8 port RTA\n"); - return (TYPE_RTA8); - default: - rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Unrecognised\n"); - return (99); - } -} - -int RIOSetChange(struct rio_info *p) -{ - if (p->RIOQuickCheck != NOT_CHANGED) - return (0); - p->RIOQuickCheck = CHANGED; - if (p->RIOSignalProcess) { - rio_dprintk(RIO_DEBUG_ROUTE, "Send SIG-HUP"); - /* - psignal( RIOSignalProcess, SIGHUP ); - */ - } - return (0); -} - -static void RIOConCon(struct rio_info *p, - struct Host *HostP, - unsigned int FromId, - unsigned int FromLink, - unsigned int ToId, - unsigned int ToLink, - int Change) -{ - char *FromName; - char *FromType; - char *ToName; - char *ToType; - unsigned int tp; - -/* -** 15.10.1998 ARG - ESIL 0759 -** (Part) fix for port being trashed when opened whilst RTA "disconnected" -** -** What's this doing in here anyway ? -** It was causing the port to be 'unmapped' if opened whilst RTA "disconnected" -** -** 09.12.1998 ARG - ESIL 0776 - part fix -** Okay, We've found out what this was all about now ! -** Someone had botched this to use RIOHalted to indicated the number of RTAs -** 'disconnected'. The value in RIOHalted was then being used in the -** 'RIO_QUICK_CHECK' ioctl. A none zero value indicating that a least one RTA -** is 'disconnected'. The change was put in to satisfy a customer's needs. -** Having taken this bit of code out 'RIO_QUICK_CHECK' now no longer works for -** the customer. -** - if (Change == CONNECT) { - if (p->RIOHalted) p->RIOHalted --; - } - else { - p->RIOHalted ++; - } -** -** So - we need to implement it slightly differently - a new member of the -** rio_info struct - RIORtaDisCons (RIO RTA connections) keeps track of RTA -** connections and disconnections. -*/ - if (Change == CONNECT) { - if (p->RIORtaDisCons) - p->RIORtaDisCons--; - } else { - p->RIORtaDisCons++; - } - - if (p->RIOPrintDisabled == DONT_PRINT) - return; - - if (FromId > ToId) { - tp = FromId; - FromId = ToId; - ToId = tp; - tp = FromLink; - FromLink = ToLink; - ToLink = tp; - } - - FromName = FromId ? HostP->Mapping[FromId - 1].Name : HostP->Name; - FromType = FromId ? "RTA" : "HOST"; - ToName = ToId ? HostP->Mapping[ToId - 1].Name : HostP->Name; - ToType = ToId ? "RTA" : "HOST"; - - rio_dprintk(RIO_DEBUG_ROUTE, "Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected"); - printk(KERN_DEBUG "rio: Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected"); -} - -/* -** RIORemoveFromSavedTable : -** -** Delete and RTA entry from the saved table given to us -** by the configuration program. -*/ -static int RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap) -{ - int entry; - - /* - ** We loop for all entries even after finding an entry and - ** zeroing it because we may have two entries to delete if - ** it's a 16 port RTA. - */ - for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { - if (p->RIOSavedTable[entry].RtaUniqueNum == pMap->RtaUniqueNum) { - memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map)); - } - } - return 0; -} - - -/* -** RIOCheckDisconnected : -** -** Scan the unit links to and return zero if the unit is completely -** disconnected. -*/ -static int RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit) -{ - int link; - - - rio_dprintk(RIO_DEBUG_ROUTE, "RIOFreeDisconnect unit %d\n", unit); - /* - ** If the slot is tentative and does not belong to the - ** second half of a 16 port RTA then scan to see if - ** is disconnected. - */ - for (link = 0; link < LINKS_PER_UNIT; link++) { - if (HostP->Mapping[unit].Topology[link].Unit != ROUTE_DISCONNECT) - break; - } - - /* - ** If not all links are disconnected then we can forget about it. - */ - if (link < LINKS_PER_UNIT) - return 1; - -#ifdef NEED_TO_FIX_THIS - /* Ok so all the links are disconnected. But we may have only just - ** made this slot tentative and not yet received a topology update. - ** Lets check how long ago we made it tentative. - */ - rio_dprintk(RIO_DEBUG_ROUTE, "Just about to check LBOLT on entry %d\n", unit); - if (drv_getparm(LBOLT, (ulong_t *) & current_time)) - rio_dprintk(RIO_DEBUG_ROUTE, "drv_getparm(LBOLT,....) Failed.\n"); - - elapse_time = current_time - TentTime[unit]; - rio_dprintk(RIO_DEBUG_ROUTE, "elapse %d = current %d - tent %d (%d usec)\n", elapse_time, current_time, TentTime[unit], drv_hztousec(elapse_time)); - if (drv_hztousec(elapse_time) < WAIT_TO_FINISH) { - rio_dprintk(RIO_DEBUG_ROUTE, "Skipping slot %d, not timed out yet %d\n", unit, drv_hztousec(elapse_time)); - return 1; - } -#endif - - /* - ** We have found an usable slot. - ** If it is half of a 16 port RTA then delete the other half. - */ - if (HostP->Mapping[unit].ID2 != 0) { - int nOther = (HostP->Mapping[unit].ID2) - 1; - - rio_dprintk(RIO_DEBUG_ROUTE, "RioFreedis second slot %d.\n", nOther); - memset(&HostP->Mapping[nOther], 0, sizeof(struct Map)); - } - RIORemoveFromSavedTable(p, &HostP->Mapping[unit]); - - return 0; -} - - -/* -** RIOFindFreeID : -** -** This function scans the given host table for either one -** or two free unit ID's. -*/ - -int RIOFindFreeID(struct rio_info *p, struct Host *HostP, unsigned int * pID1, unsigned int * pID2) -{ - int unit, tempID; - - /* - ** Initialise the ID's to MAX_RUP. - ** We do this to make the loop for setting the ID's as simple as - ** possible. - */ - *pID1 = MAX_RUP; - if (pID2 != NULL) - *pID2 = MAX_RUP; - - /* - ** Scan all entries of the host mapping table for free slots. - ** We scan for free slots first and then if that is not successful - ** we start all over again looking for tentative slots we can re-use. - */ - for (unit = 0; unit < MAX_RUP; unit++) { - rio_dprintk(RIO_DEBUG_ROUTE, "Scanning unit %d\n", unit); - /* - ** If the flags are zero then the slot is empty. - */ - if (HostP->Mapping[unit].Flags == 0) { - rio_dprintk(RIO_DEBUG_ROUTE, " This slot is empty.\n"); - /* - ** If we haven't allocated the first ID then do it now. - */ - if (*pID1 == MAX_RUP) { - rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for first unit %d\n", unit); - *pID1 = unit; - - /* - ** If the second ID is not needed then we can return - ** now. - */ - if (pID2 == NULL) - return 0; - } else { - /* - ** Allocate the second slot and return. - */ - rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for second unit %d\n", unit); - *pID2 = unit; - return 0; - } - } - } - - /* - ** If we manage to come out of the free slot loop then we - ** need to start all over again looking for tentative slots - ** that we can re-use. - */ - rio_dprintk(RIO_DEBUG_ROUTE, "Starting to scan for tentative slots\n"); - for (unit = 0; unit < MAX_RUP; unit++) { - if (((HostP->Mapping[unit].Flags & SLOT_TENTATIVE) || (HostP->Mapping[unit].Flags == 0)) && !(HostP->Mapping[unit].Flags & RTA16_SECOND_SLOT)) { - rio_dprintk(RIO_DEBUG_ROUTE, " Slot %d looks promising.\n", unit); - - if (unit == *pID1) { - rio_dprintk(RIO_DEBUG_ROUTE, " No it isn't, its the 1st half\n"); - continue; - } - - /* - ** Slot is Tentative or Empty, but not a tentative second - ** slot of a 16 porter. - ** Attempt to free up this slot (and its parnter if - ** it is a 16 port slot. The second slot will become - ** empty after a call to RIOFreeDisconnected so thats why - ** we look for empty slots above as well). - */ - if (HostP->Mapping[unit].Flags != 0) - if (RIOFreeDisconnected(p, HostP, unit) != 0) - continue; - /* - ** If we haven't allocated the first ID then do it now. - */ - if (*pID1 == MAX_RUP) { - rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative entry for first unit %d\n", unit); - *pID1 = unit; - - /* - ** Clear out this slot now that we intend to use it. - */ - memset(&HostP->Mapping[unit], 0, sizeof(struct Map)); - - /* - ** If the second ID is not needed then we can return - ** now. - */ - if (pID2 == NULL) - return 0; - } else { - /* - ** Allocate the second slot and return. - */ - rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative/empty entry for second unit %d\n", unit); - *pID2 = unit; - - /* - ** Clear out this slot now that we intend to use it. - */ - memset(&HostP->Mapping[unit], 0, sizeof(struct Map)); - - /* At this point under the right(wrong?) conditions - ** we may have a first unit ID being higher than the - ** second unit ID. This is a bad idea if we are about - ** to fill the slots with a 16 port RTA. - ** Better check and swap them over. - */ - - if (*pID1 > *pID2) { - rio_dprintk(RIO_DEBUG_ROUTE, "Swapping IDS %d %d\n", *pID1, *pID2); - tempID = *pID1; - *pID1 = *pID2; - *pID2 = tempID; - } - return 0; - } - } - } - - /* - ** If we manage to get to the end of the second loop then we - ** can give up and return a failure. - */ - return 1; -} - - -/* -** The link switch scenario. -** -** Rta Wun (A) is connected to Tuw (A). -** The tables are all up to date, and the system is OK. -** -** If Wun (A) is now moved to Wun (B) before Wun (A) can -** become disconnected, then the follow happens: -** -** Tuw (A) spots the change of unit:link at the other end -** of its link and Tuw sends a topology packet reflecting -** the change: Tuw (A) now disconnected from Wun (A), and -** this is closely followed by a packet indicating that -** Tuw (A) is now connected to Wun (B). -** -** Wun (B) will spot that it has now become connected, and -** Wun will send a topology packet, which indicates that -** both Wun (A) and Wun (B) is connected to Tuw (A). -** -** Eventually Wun (A) realises that it is now disconnected -** and Wun will send out a topology packet indicating that -** Wun (A) is now disconnected. -*/ diff --git a/drivers/char/rio/riospace.h b/drivers/char/rio/riospace.h deleted file mode 100644 index ffb31d4332b9..000000000000 --- a/drivers/char/rio/riospace.h +++ /dev/null @@ -1,154 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riospace.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:13 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)riospace.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_riospace_h__ -#define __rio_riospace_h__ - -#define RIO_LOCATOR_LEN 16 -#define MAX_RIO_BOARDS 4 - -/* -** DONT change this file. At all. Unless you can rebuild the entire -** device driver, which you probably can't, then the rest of the -** driver won't see any changes you make here. So don't make any. -** In particular, it won't be able to see changes to RIO_SLOTS -*/ - -struct Conf { - char Locator[24]; - unsigned int StartupTime; - unsigned int SlowCook; - unsigned int IntrPollTime; - unsigned int BreakInterval; - unsigned int Timer; - unsigned int RtaLoadBase; - unsigned int HostLoadBase; - unsigned int XpHz; - unsigned int XpCps; - char *XpOn; - char *XpOff; - unsigned int MaxXpCps; - unsigned int MinXpCps; - unsigned int SpinCmds; - unsigned int FirstAddr; - unsigned int LastAddr; - unsigned int BufferSize; - unsigned int LowWater; - unsigned int LineLength; - unsigned int CmdTime; -}; - -/* -** Board types - these MUST correspond to product codes! -*/ -#define RIO_EMPTY 0x0 -#define RIO_EISA 0x3 -#define RIO_RTA_16 0x9 -#define RIO_AT 0xA -#define RIO_MCA 0xB -#define RIO_PCI 0xD -#define RIO_RTA 0xE - -/* -** Board data structure. This is used for configuration info -*/ -struct Brd { - unsigned char Type; /* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */ - unsigned char Ivec; /* POLLED or ivec number */ - unsigned char Mode; /* Control stuff, see below */ -}; - -struct Board { - char Locator[RIO_LOCATOR_LEN]; - int NumSlots; - struct Brd Boards[MAX_RIO_BOARDS]; -}; - -#define BOOT_FROM_LINK 0x00 -#define BOOT_FROM_RAM 0x01 -#define EXTERNAL_BUS_OFF 0x00 -#define EXTERNAL_BUS_ON 0x02 -#define INTERRUPT_DISABLE 0x00 -#define INTERRUPT_ENABLE 0x04 -#define BYTE_OPERATION 0x00 -#define WORD_OPERATION 0x08 -#define POLLED INTERRUPT_DISABLE -#define IRQ_15 (0x00 | INTERRUPT_ENABLE) -#define IRQ_12 (0x10 | INTERRUPT_ENABLE) -#define IRQ_11 (0x20 | INTERRUPT_ENABLE) -#define IRQ_9 (0x30 | INTERRUPT_ENABLE) -#define SLOW_LINKS 0x00 -#define FAST_LINKS 0x40 -#define SLOW_AT_BUS 0x00 -#define FAST_AT_BUS 0x80 -#define SLOW_PCI_TP 0x00 -#define FAST_PCI_TP 0x80 -/* -** Debug levels -*/ -#define DBG_NONE 0x00000000 - -#define DBG_INIT 0x00000001 -#define DBG_OPEN 0x00000002 -#define DBG_CLOSE 0x00000004 -#define DBG_IOCTL 0x00000008 - -#define DBG_READ 0x00000010 -#define DBG_WRITE 0x00000020 -#define DBG_INTR 0x00000040 -#define DBG_PROC 0x00000080 - -#define DBG_PARAM 0x00000100 -#define DBG_CMD 0x00000200 -#define DBG_XPRINT 0x00000400 -#define DBG_POLL 0x00000800 - -#define DBG_DAEMON 0x00001000 -#define DBG_FAIL 0x00002000 -#define DBG_MODEM 0x00004000 -#define DBG_LIST 0x00008000 - -#define DBG_ROUTE 0x00010000 -#define DBG_UTIL 0x00020000 -#define DBG_BOOT 0x00040000 -#define DBG_BUFFER 0x00080000 - -#define DBG_MON 0x00100000 -#define DBG_SPECIAL 0x00200000 -#define DBG_VPIX 0x00400000 -#define DBG_FLUSH 0x00800000 - -#define DBG_QENABLE 0x01000000 - -#define DBG_ALWAYS 0x80000000 - -#endif /* __rio_riospace_h__ */ diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c deleted file mode 100644 index 3d15802dc0f3..000000000000 --- a/drivers/char/rio/riotable.c +++ /dev/null @@ -1,941 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riotable.c -** SID : 1.2 -** Last Modified : 11/6/98 10:33:47 -** Retrieved : 11/6/98 10:33:50 -** -** ident @(#)riotable.c 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" -#include "protsts.h" - -/* -** A configuration table has been loaded. It is now up to us -** to sort it out and use the information contained therein. -*/ -int RIONewTable(struct rio_info *p) -{ - int Host, Host1, Host2, NameIsUnique, Entry, SubEnt; - struct Map *MapP; - struct Map *HostMapP; - struct Host *HostP; - - char *cptr; - - /* - ** We have been sent a new table to install. We need to break - ** it down into little bits and spread it around a bit to see - ** what we have got. - */ - /* - ** Things to check: - ** (things marked 'xx' aren't checked any more!) - ** (1) That there are no booted Hosts/RTAs out there. - ** (2) That the names are properly formed - ** (3) That blank entries really are. - ** xx (4) That hosts mentioned in the table actually exist. xx - ** (5) That the IDs are unique (per host). - ** (6) That host IDs are zero - ** (7) That port numbers are valid - ** (8) That port numbers aren't duplicated - ** (9) That names aren't duplicated - ** xx (10) That hosts that actually exist are mentioned in the table. xx - */ - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(1)\n"); - if (p->RIOSystemUp) { /* (1) */ - p->RIOError.Error = HOST_HAS_ALREADY_BEEN_BOOTED; - return -EBUSY; - } - - p->RIOError.Error = NOTHING_WRONG_AT_ALL; - p->RIOError.Entry = -1; - p->RIOError.Other = -1; - - for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { - MapP = &p->RIOConnectTable[Entry]; - if ((MapP->Flags & RTA16_SECOND_SLOT) == 0) { - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(2)\n"); - cptr = MapP->Name; /* (2) */ - cptr[MAX_NAME_LEN - 1] = '\0'; - if (cptr[0] == '\0') { - memcpy(MapP->Name, MapP->RtaUniqueNum ? "RTA NN" : "HOST NN", 8); - MapP->Name[5] = '0' + Entry / 10; - MapP->Name[6] = '0' + Entry % 10; - } - while (*cptr) { - if (*cptr < ' ' || *cptr > '~') { - p->RIOError.Error = BAD_CHARACTER_IN_NAME; - p->RIOError.Entry = Entry; - return -ENXIO; - } - cptr++; - } - } - - /* - ** If the entry saved was a tentative entry then just forget - ** about it. - */ - if (MapP->Flags & SLOT_TENTATIVE) { - MapP->HostUniqueNum = 0; - MapP->RtaUniqueNum = 0; - continue; - } - - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(3)\n"); - if (!MapP->RtaUniqueNum && !MapP->HostUniqueNum) { /* (3) */ - if (MapP->ID || MapP->SysPort || MapP->Flags) { - rio_dprintk(RIO_DEBUG_TABLE, "%s pretending to be empty but isn't\n", MapP->Name); - p->RIOError.Error = TABLE_ENTRY_ISNT_PROPERLY_NULL; - p->RIOError.Entry = Entry; - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_TABLE, "!RIO: Daemon: test (3) passes\n"); - continue; - } - - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(4)\n"); - for (Host = 0; Host < p->RIONumHosts; Host++) { /* (4) */ - if (p->RIOHosts[Host].UniqueNum == MapP->HostUniqueNum) { - HostP = &p->RIOHosts[Host]; - /* - ** having done the lookup, we don't really want to do - ** it again, so hang the host number in a safe place - */ - MapP->Topology[0].Unit = Host; - break; - } - } - - if (Host >= p->RIONumHosts) { - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has unknown host unique number 0x%x\n", MapP->Name, MapP->HostUniqueNum); - MapP->HostUniqueNum = 0; - /* MapP->RtaUniqueNum = 0; */ - /* MapP->ID = 0; */ - /* MapP->Flags = 0; */ - /* MapP->SysPort = 0; */ - /* MapP->Name[0] = 0; */ - continue; - } - - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(5)\n"); - if (MapP->RtaUniqueNum) { /* (5) */ - if (!MapP->ID) { - rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an ID of zero!\n", MapP->Name); - p->RIOError.Error = ZERO_RTA_ID; - p->RIOError.Entry = Entry; - return -ENXIO; - } - if (MapP->ID > MAX_RUP) { - rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an invalid ID %d\n", MapP->Name, MapP->ID); - p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; - p->RIOError.Entry = Entry; - return -ENXIO; - } - for (SubEnt = 0; SubEnt < Entry; SubEnt++) { - if (MapP->HostUniqueNum == p->RIOConnectTable[SubEnt].HostUniqueNum && MapP->ID == p->RIOConnectTable[SubEnt].ID) { - rio_dprintk(RIO_DEBUG_TABLE, "Dupl. ID number allocated to RTA %s and RTA %s\n", MapP->Name, p->RIOConnectTable[SubEnt].Name); - p->RIOError.Error = DUPLICATED_RTA_ID; - p->RIOError.Entry = Entry; - p->RIOError.Other = SubEnt; - return -ENXIO; - } - /* - ** If the RtaUniqueNum is the same, it may be looking at both - ** entries for a 16 port RTA, so check the ids - */ - if ((MapP->RtaUniqueNum == p->RIOConnectTable[SubEnt].RtaUniqueNum) - && (MapP->ID2 != p->RIOConnectTable[SubEnt].ID)) { - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", MapP->Name); - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", p->RIOConnectTable[SubEnt].Name); - p->RIOError.Error = DUPLICATE_UNIQUE_NUMBER; - p->RIOError.Entry = Entry; - p->RIOError.Other = SubEnt; - return -ENXIO; - } - } - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7a)\n"); - /* (7a) */ - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) { - rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d-RTA %s is not a multiple of %d!\n", (int) MapP->SysPort, MapP->Name, PORTS_PER_RTA); - p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; - p->RIOError.Entry = Entry; - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7b)\n"); - /* (7b) */ - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) { - rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d for RTA %s is too big\n", (int) MapP->SysPort, MapP->Name); - p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; - p->RIOError.Entry = Entry; - return -ENXIO; - } - for (SubEnt = 0; SubEnt < Entry; SubEnt++) { - if (p->RIOConnectTable[SubEnt].Flags & RTA16_SECOND_SLOT) - continue; - if (p->RIOConnectTable[SubEnt].RtaUniqueNum) { - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(8)\n"); - /* (8) */ - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort == p->RIOConnectTable[SubEnt].SysPort)) { - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s:same TTY port # as RTA %s (%d)\n", MapP->Name, p->RIOConnectTable[SubEnt].Name, (int) MapP->SysPort); - p->RIOError.Error = TTY_NUMBER_IN_USE; - p->RIOError.Entry = Entry; - p->RIOError.Other = SubEnt; - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(9)\n"); - if (strcmp(MapP->Name, p->RIOConnectTable[SubEnt].Name) == 0 && !(MapP->Flags & RTA16_SECOND_SLOT)) { /* (9) */ - rio_dprintk(RIO_DEBUG_TABLE, "RTA name %s used twice\n", MapP->Name); - p->RIOError.Error = NAME_USED_TWICE; - p->RIOError.Entry = Entry; - p->RIOError.Other = SubEnt; - return -ENXIO; - } - } - } - } else { /* (6) */ - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(6)\n"); - if (MapP->ID) { - rio_dprintk(RIO_DEBUG_TABLE, "RIO:HOST %s has been allocated ID that isn't zero!\n", MapP->Name); - p->RIOError.Error = HOST_ID_NOT_ZERO; - p->RIOError.Entry = Entry; - return -ENXIO; - } - if (MapP->SysPort != NO_PORT) { - rio_dprintk(RIO_DEBUG_TABLE, "RIO: HOST %s has been allocated port numbers!\n", MapP->Name); - p->RIOError.Error = HOST_SYSPORT_BAD; - p->RIOError.Entry = Entry; - return -ENXIO; - } - } - } - - /* - ** wow! if we get here then it's a goody! - */ - - /* - ** Zero the (old) entries for each host... - */ - for (Host = 0; Host < RIO_HOSTS; Host++) { - for (Entry = 0; Entry < MAX_RUP; Entry++) { - memset(&p->RIOHosts[Host].Mapping[Entry], 0, sizeof(struct Map)); - } - memset(&p->RIOHosts[Host].Name[0], 0, sizeof(p->RIOHosts[Host].Name)); - } - - /* - ** Copy in the new table entries - */ - for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: Copy table for Host entry %d\n", Entry); - MapP = &p->RIOConnectTable[Entry]; - - /* - ** Now, if it is an empty slot ignore it! - */ - if (MapP->HostUniqueNum == 0) - continue; - - /* - ** we saved the host number earlier, so grab it back - */ - HostP = &p->RIOHosts[MapP->Topology[0].Unit]; - - /* - ** If it is a host, then we only need to fill in the name field. - */ - if (MapP->ID == 0) { - rio_dprintk(RIO_DEBUG_TABLE, "Host entry found. Name %s\n", MapP->Name); - memcpy(HostP->Name, MapP->Name, MAX_NAME_LEN); - continue; - } - - /* - ** Its an RTA entry, so fill in the host mapping entries for it - ** and the port mapping entries. Notice that entry zero is for - ** ID one. - */ - HostMapP = &HostP->Mapping[MapP->ID - 1]; - - if (MapP->Flags & SLOT_IN_USE) { - rio_dprintk(RIO_DEBUG_TABLE, "Rta entry found. Name %s\n", MapP->Name); - /* - ** structure assign, then sort out the bits we shouldn't have done - */ - *HostMapP = *MapP; - - HostMapP->Flags = SLOT_IN_USE; - if (MapP->Flags & RTA16_SECOND_SLOT) - HostMapP->Flags |= RTA16_SECOND_SLOT; - - RIOReMapPorts(p, HostP, HostMapP); - } else { - rio_dprintk(RIO_DEBUG_TABLE, "TENTATIVE Rta entry found. Name %s\n", MapP->Name); - } - } - - for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { - p->RIOSavedTable[Entry] = p->RIOConnectTable[Entry]; - } - - for (Host = 0; Host < p->RIONumHosts; Host++) { - for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) { - p->RIOHosts[Host].Topology[SubEnt].Unit = ROUTE_DISCONNECT; - p->RIOHosts[Host].Topology[SubEnt].Link = NO_LINK; - } - for (Entry = 0; Entry < MAX_RUP; Entry++) { - for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) { - p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Unit = ROUTE_DISCONNECT; - p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Link = NO_LINK; - } - } - if (!p->RIOHosts[Host].Name[0]) { - memcpy(p->RIOHosts[Host].Name, "HOST 1", 7); - p->RIOHosts[Host].Name[5] += Host; - } - /* - ** Check that default name assigned is unique. - */ - Host1 = Host; - NameIsUnique = 0; - while (!NameIsUnique) { - NameIsUnique = 1; - for (Host2 = 0; Host2 < p->RIONumHosts; Host2++) { - if (Host2 == Host) - continue; - if (strcmp(p->RIOHosts[Host].Name, p->RIOHosts[Host2].Name) - == 0) { - NameIsUnique = 0; - Host1++; - if (Host1 >= p->RIONumHosts) - Host1 = 0; - p->RIOHosts[Host].Name[5] = '1' + Host1; - } - } - } - /* - ** Rename host if name already used. - */ - if (Host1 != Host) { - rio_dprintk(RIO_DEBUG_TABLE, "Default name %s already used\n", p->RIOHosts[Host].Name); - memcpy(p->RIOHosts[Host].Name, "HOST 1", 7); - p->RIOHosts[Host].Name[5] += Host1; - } - rio_dprintk(RIO_DEBUG_TABLE, "Assigning default name %s\n", p->RIOHosts[Host].Name); - } - return 0; -} - -/* -** User process needs the config table - build it from first -** principles. -** -* FIXME: SMP locking -*/ -int RIOApel(struct rio_info *p) -{ - int Host; - int link; - int Rup; - int Next = 0; - struct Map *MapP; - struct Host *HostP; - unsigned long flags; - - rio_dprintk(RIO_DEBUG_TABLE, "Generating a table to return to config.rio\n"); - - memset(&p->RIOConnectTable[0], 0, sizeof(struct Map) * TOTAL_MAP_ENTRIES); - - for (Host = 0; Host < RIO_HOSTS; Host++) { - rio_dprintk(RIO_DEBUG_TABLE, "Processing host %d\n", Host); - HostP = &p->RIOHosts[Host]; - rio_spin_lock_irqsave(&HostP->HostLock, flags); - - MapP = &p->RIOConnectTable[Next++]; - MapP->HostUniqueNum = HostP->UniqueNum; - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - continue; - } - MapP->RtaUniqueNum = 0; - MapP->ID = 0; - MapP->Flags = SLOT_IN_USE; - MapP->SysPort = NO_PORT; - for (link = 0; link < LINKS_PER_UNIT; link++) - MapP->Topology[link] = HostP->Topology[link]; - memcpy(MapP->Name, HostP->Name, MAX_NAME_LEN); - for (Rup = 0; Rup < MAX_RUP; Rup++) { - if (HostP->Mapping[Rup].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) { - p->RIOConnectTable[Next] = HostP->Mapping[Rup]; - if (HostP->Mapping[Rup].Flags & SLOT_IN_USE) - p->RIOConnectTable[Next].Flags |= SLOT_IN_USE; - if (HostP->Mapping[Rup].Flags & SLOT_TENTATIVE) - p->RIOConnectTable[Next].Flags |= SLOT_TENTATIVE; - if (HostP->Mapping[Rup].Flags & RTA16_SECOND_SLOT) - p->RIOConnectTable[Next].Flags |= RTA16_SECOND_SLOT; - Next++; - } - } - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - } - return 0; -} - -/* -** config.rio has taken a dislike to one of the gross maps entries. -** if the entry is suitably inactive, then we can gob on it and remove -** it from the table. -*/ -int RIODeleteRta(struct rio_info *p, struct Map *MapP) -{ - int host, entry, port, link; - int SysPort; - struct Host *HostP; - struct Map *HostMapP; - struct Port *PortP; - int work_done = 0; - unsigned long lock_flags, sem_flags; - - rio_dprintk(RIO_DEBUG_TABLE, "Delete entry on host %x, rta %x\n", MapP->HostUniqueNum, MapP->RtaUniqueNum); - - for (host = 0; host < p->RIONumHosts; host++) { - HostP = &p->RIOHosts[host]; - - rio_spin_lock_irqsave(&HostP->HostLock, lock_flags); - - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); - continue; - } - - for (entry = 0; entry < MAX_RUP; entry++) { - if (MapP->RtaUniqueNum == HostP->Mapping[entry].RtaUniqueNum) { - HostMapP = &HostP->Mapping[entry]; - rio_dprintk(RIO_DEBUG_TABLE, "Found entry offset %d on host %s\n", entry, HostP->Name); - - /* - ** Check all four links of the unit are disconnected - */ - for (link = 0; link < LINKS_PER_UNIT; link++) { - if (HostMapP->Topology[link].Unit != ROUTE_DISCONNECT) { - rio_dprintk(RIO_DEBUG_TABLE, "Entry is in use and cannot be deleted!\n"); - p->RIOError.Error = UNIT_IS_IN_USE; - rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); - return -EBUSY; - } - } - /* - ** Slot has been allocated, BUT not booted/routed/ - ** connected/selected or anything else-ed - */ - SysPort = HostMapP->SysPort; - - if (SysPort != NO_PORT) { - for (port = SysPort; port < SysPort + PORTS_PER_RTA; port++) { - PortP = p->RIOPortp[port]; - rio_dprintk(RIO_DEBUG_TABLE, "Unmap port\n"); - - rio_spin_lock_irqsave(&PortP->portSem, sem_flags); - - PortP->Mapped = 0; - - if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { - - rio_dprintk(RIO_DEBUG_TABLE, "Gob on port\n"); - PortP->TxBufferIn = PortP->TxBufferOut = 0; - /* What should I do - wakeup( &PortP->TxBufferIn ); - wakeup( &PortP->TxBufferOut); - */ - PortP->InUse = NOT_INUSE; - /* What should I do - wakeup( &PortP->InUse ); - signal(PortP->TtyP->t_pgrp,SIGKILL); - ttyflush(PortP->TtyP,(FREAD|FWRITE)); - */ - PortP->State |= RIO_CLOSING | RIO_DELETED; - } - - /* - ** For the second slot of a 16 port RTA, the - ** driver needs to reset the changes made to - ** the phb to port mappings in RIORouteRup. - */ - if (PortP->SecondBlock) { - u16 dest_unit = HostMapP->ID; - u16 dest_port = port - SysPort; - u16 __iomem *TxPktP; - struct PKT __iomem *Pkt; - - for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) { - /* - ** *TxPktP is the pointer to the - ** transmit packet on the host card. - ** This needs to be translated into - ** a 32 bit pointer so it can be - ** accessed from the driver. - */ - Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&*TxPktP)); - rio_dprintk(RIO_DEBUG_TABLE, "Tx packet (%x) destination: Old %x:%x New %x:%x\n", readw(TxPktP), readb(&Pkt->dest_unit), readb(&Pkt->dest_port), dest_unit, dest_port); - writew(dest_unit, &Pkt->dest_unit); - writew(dest_port, &Pkt->dest_port); - } - rio_dprintk(RIO_DEBUG_TABLE, "Port %d phb destination: Old %x:%x New %x:%x\n", port, readb(&PortP->PhbP->destination) & 0xff, (readb(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port); - writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination); - } - rio_spin_unlock_irqrestore(&PortP->portSem, sem_flags); - } - } - rio_dprintk(RIO_DEBUG_TABLE, "Entry nulled.\n"); - memset(HostMapP, 0, sizeof(struct Map)); - work_done++; - } - } - rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); - } - - /* XXXXX lock me up */ - for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { - if (p->RIOSavedTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) { - memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map)); - work_done++; - } - if (p->RIOConnectTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) { - memset(&p->RIOConnectTable[entry], 0, sizeof(struct Map)); - work_done++; - } - } - if (work_done) - return 0; - - rio_dprintk(RIO_DEBUG_TABLE, "Couldn't find entry to be deleted\n"); - p->RIOError.Error = COULDNT_FIND_ENTRY; - return -ENXIO; -} - -int RIOAssignRta(struct rio_info *p, struct Map *MapP) -{ - int host; - struct Map *HostMapP; - char *sptr; - int link; - - - rio_dprintk(RIO_DEBUG_TABLE, "Assign entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort); - - if ((MapP->ID != (u16) - 1) && ((int) MapP->ID < (int) 1 || (int) MapP->ID > MAX_RUP)) { - rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n"); - p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - if (MapP->RtaUniqueNum == 0) { - rio_dprintk(RIO_DEBUG_TABLE, "Rta Unique number zero!\n"); - p->RIOError.Error = RTA_UNIQUE_NUMBER_ZERO; - return -EINVAL; - } - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) { - rio_dprintk(RIO_DEBUG_TABLE, "Port %d not multiple of %d!\n", (int) MapP->SysPort, PORTS_PER_RTA); - p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) { - rio_dprintk(RIO_DEBUG_TABLE, "Port %d not valid!\n", (int) MapP->SysPort); - p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - /* - ** Copy the name across to the map entry. - */ - MapP->Name[MAX_NAME_LEN - 1] = '\0'; - sptr = MapP->Name; - while (*sptr) { - if (*sptr < ' ' || *sptr > '~') { - rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n"); - p->RIOError.Error = BAD_CHARACTER_IN_NAME; - return -EINVAL; - } - sptr++; - } - - for (host = 0; host < p->RIONumHosts; host++) { - if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) { - if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) { - p->RIOError.Error = HOST_NOT_RUNNING; - return -ENXIO; - } - - /* - ** Now we have a host we need to allocate an ID - ** if the entry does not already have one. - */ - if (MapP->ID == (u16) - 1) { - int nNewID; - - rio_dprintk(RIO_DEBUG_TABLE, "Attempting to get a new ID for rta \"%s\"\n", MapP->Name); - /* - ** The idea here is to allow RTA's to be assigned - ** before they actually appear on the network. - ** This allows the addition of RTA's without having - ** to plug them in. - ** What we do is: - ** - Find a free ID and allocate it to the RTA. - ** - If this map entry is the second half of a - ** 16 port entry then find the other half and - ** make sure the 2 cross reference each other. - */ - if (RIOFindFreeID(p, &p->RIOHosts[host], &nNewID, NULL) != 0) { - p->RIOError.Error = COULDNT_FIND_ENTRY; - return -EBUSY; - } - MapP->ID = (u16) nNewID + 1; - rio_dprintk(RIO_DEBUG_TABLE, "Allocated ID %d for this new RTA.\n", MapP->ID); - HostMapP = &p->RIOHosts[host].Mapping[nNewID]; - HostMapP->RtaUniqueNum = MapP->RtaUniqueNum; - HostMapP->HostUniqueNum = MapP->HostUniqueNum; - HostMapP->ID = MapP->ID; - for (link = 0; link < LINKS_PER_UNIT; link++) { - HostMapP->Topology[link].Unit = ROUTE_DISCONNECT; - HostMapP->Topology[link].Link = NO_LINK; - } - if (MapP->Flags & RTA16_SECOND_SLOT) { - int unit; - - for (unit = 0; unit < MAX_RUP; unit++) - if (p->RIOHosts[host].Mapping[unit].RtaUniqueNum == MapP->RtaUniqueNum) - break; - if (unit == MAX_RUP) { - p->RIOError.Error = COULDNT_FIND_ENTRY; - return -EBUSY; - } - HostMapP->Flags |= RTA16_SECOND_SLOT; - HostMapP->ID2 = MapP->ID2 = p->RIOHosts[host].Mapping[unit].ID; - p->RIOHosts[host].Mapping[unit].ID2 = MapP->ID; - rio_dprintk(RIO_DEBUG_TABLE, "Cross referenced id %d to ID %d.\n", MapP->ID, p->RIOHosts[host].Mapping[unit].ID); - } - } - - HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1]; - - if (HostMapP->Flags & SLOT_IN_USE) { - rio_dprintk(RIO_DEBUG_TABLE, "Map table slot for ID %d is already in use.\n", MapP->ID); - p->RIOError.Error = ID_ALREADY_IN_USE; - return -EBUSY; - } - - /* - ** Assign the sys ports and the name, and mark the slot as - ** being in use. - */ - HostMapP->SysPort = MapP->SysPort; - if ((MapP->Flags & RTA16_SECOND_SLOT) == 0) - memcpy(HostMapP->Name, MapP->Name, MAX_NAME_LEN); - HostMapP->Flags = SLOT_IN_USE | RTA_BOOTED; -#ifdef NEED_TO_FIX - RIO_SV_BROADCAST(p->RIOHosts[host].svFlags[MapP->ID - 1]); -#endif - if (MapP->Flags & RTA16_SECOND_SLOT) - HostMapP->Flags |= RTA16_SECOND_SLOT; - - RIOReMapPorts(p, &p->RIOHosts[host], HostMapP); - /* - ** Adjust 2nd block of 8 phbs - */ - if (MapP->Flags & RTA16_SECOND_SLOT) - RIOFixPhbs(p, &p->RIOHosts[host], HostMapP->ID - 1); - - if (HostMapP->SysPort != NO_PORT) { - if (HostMapP->SysPort < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = HostMapP->SysPort; - if (HostMapP->SysPort > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = HostMapP->SysPort; - } - if (MapP->Flags & RTA16_SECOND_SLOT) - rio_dprintk(RIO_DEBUG_TABLE, "Second map of RTA %s added to configuration\n", p->RIOHosts[host].Mapping[MapP->ID2 - 1].Name); - else - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s added to configuration\n", MapP->Name); - return 0; - } - } - p->RIOError.Error = UNKNOWN_HOST_NUMBER; - rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum); - return -ENXIO; -} - - -int RIOReMapPorts(struct rio_info *p, struct Host *HostP, struct Map *HostMapP) -{ - struct Port *PortP; - unsigned int SubEnt; - unsigned int HostPort; - unsigned int SysPort; - u16 RtaType; - unsigned long flags; - - rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d to id %d\n", (int) HostMapP->SysPort, HostMapP->ID); - - /* - ** We need to tell the UnixRups which sysport the rup corresponds to - */ - HostP->UnixRups[HostMapP->ID - 1].BaseSysPort = HostMapP->SysPort; - - if (HostMapP->SysPort == NO_PORT) - return (0); - - RtaType = GetUnitType(HostMapP->RtaUniqueNum); - rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d-%d\n", (int) HostMapP->SysPort, (int) HostMapP->SysPort + PORTS_PER_RTA - 1); - - /* - ** now map each of its eight ports - */ - for (SubEnt = 0; SubEnt < PORTS_PER_RTA; SubEnt++) { - rio_dprintk(RIO_DEBUG_TABLE, "subent = %d, HostMapP->SysPort = %d\n", SubEnt, (int) HostMapP->SysPort); - SysPort = HostMapP->SysPort + SubEnt; /* portnumber within system */ - /* portnumber on host */ - - HostPort = (HostMapP->ID - 1) * PORTS_PER_RTA + SubEnt; - - rio_dprintk(RIO_DEBUG_TABLE, "c1 p = %p, p->rioPortp = %p\n", p, p->RIOPortp); - PortP = p->RIOPortp[SysPort]; - rio_dprintk(RIO_DEBUG_TABLE, "Map port\n"); - - /* - ** Point at all the real neat data structures - */ - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->HostP = HostP; - PortP->Caddr = HostP->Caddr; - - /* - ** The PhbP cannot be filled in yet - ** unless the host has been booted - */ - if ((HostP->Flags & RUN_STATE) == RC_RUNNING) { - struct PHB __iomem *PhbP = PortP->PhbP = &HostP->PhbP[HostPort]; - PortP->TxAdd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_add)); - PortP->TxStart = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_start)); - PortP->TxEnd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_end)); - PortP->RxRemove = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_remove)); - PortP->RxStart = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_start)); - PortP->RxEnd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_end)); - } else - PortP->PhbP = NULL; - - /* - ** port related flags - */ - PortP->HostPort = HostPort; - /* - ** For each part of a 16 port RTA, RupNum is ID - 1. - */ - PortP->RupNum = HostMapP->ID - 1; - if (HostMapP->Flags & RTA16_SECOND_SLOT) { - PortP->ID2 = HostMapP->ID2 - 1; - PortP->SecondBlock = 1; - } else { - PortP->ID2 = 0; - PortP->SecondBlock = 0; - } - PortP->RtaUniqueNum = HostMapP->RtaUniqueNum; - - /* - ** If the port was already mapped then thats all we need to do. - */ - if (PortP->Mapped) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - continue; - } else - HostMapP->Flags &= ~RTA_NEWBOOT; - - PortP->State = 0; - PortP->Config = 0; - /* - ** Check out the module type - if it is special (read only etc.) - ** then we need to set flags in the PortP->Config. - ** Note: For 16 port RTA, all ports are of the same type. - */ - if (RtaType == TYPE_RTA16) { - PortP->Config |= p->RIOModuleTypes[HostP->UnixRups[HostMapP->ID - 1].ModTypes].Flags[SubEnt % PORTS_PER_MODULE]; - } else { - if (SubEnt < PORTS_PER_MODULE) - PortP->Config |= p->RIOModuleTypes[LONYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE]; - else - PortP->Config |= p->RIOModuleTypes[HINYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE]; - } - - /* - ** more port related flags - */ - PortP->PortState = 0; - PortP->ModemLines = 0; - PortP->ModemState = 0; - PortP->CookMode = COOK_WELL; - PortP->ParamSem = 0; - PortP->FlushCmdBodge = 0; - PortP->WflushFlag = 0; - PortP->MagicFlags = 0; - PortP->Lock = 0; - PortP->Store = 0; - PortP->FirstOpen = 1; - - /* - ** Buffers 'n things - */ - PortP->RxDataStart = 0; - PortP->Cor2Copy = 0; - PortP->Name = &HostMapP->Name[0]; - PortP->statsGather = 0; - PortP->txchars = 0; - PortP->rxchars = 0; - PortP->opens = 0; - PortP->closes = 0; - PortP->ioctls = 0; - if (PortP->TxRingBuffer) - memset(PortP->TxRingBuffer, 0, p->RIOBufferSize); - else if (p->RIOBufferSize) { - PortP->TxRingBuffer = kzalloc(p->RIOBufferSize, GFP_KERNEL); - } - PortP->TxBufferOut = 0; - PortP->TxBufferIn = 0; - PortP->Debug = 0; - /* - ** LastRxTgl stores the state of the rx toggle bit for this - ** port, to be compared with the state of the next pkt received. - ** If the same, we have received the same rx pkt from the RTA - ** twice. Initialise to a value not equal to PHB_RX_TGL or 0. - */ - PortP->LastRxTgl = ~(u8) PHB_RX_TGL; - - /* - ** and mark the port as usable - */ - PortP->Mapped = 1; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - if (HostMapP->SysPort < p->RIOFirstPortsMapped) - p->RIOFirstPortsMapped = HostMapP->SysPort; - if (HostMapP->SysPort > p->RIOLastPortsMapped) - p->RIOLastPortsMapped = HostMapP->SysPort; - - return 0; -} - -int RIOChangeName(struct rio_info *p, struct Map *MapP) -{ - int host; - struct Map *HostMapP; - char *sptr; - - rio_dprintk(RIO_DEBUG_TABLE, "Change name entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort); - - if (MapP->ID > MAX_RUP) { - rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n"); - p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - MapP->Name[MAX_NAME_LEN - 1] = '\0'; - sptr = MapP->Name; - - while (*sptr) { - if (*sptr < ' ' || *sptr > '~') { - rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n"); - p->RIOError.Error = BAD_CHARACTER_IN_NAME; - return -EINVAL; - } - sptr++; - } - - for (host = 0; host < p->RIONumHosts; host++) { - if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) { - if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) { - p->RIOError.Error = HOST_NOT_RUNNING; - return -ENXIO; - } - if (MapP->ID == 0) { - memcpy(p->RIOHosts[host].Name, MapP->Name, MAX_NAME_LEN); - return 0; - } - - HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1]; - - if (HostMapP->RtaUniqueNum != MapP->RtaUniqueNum) { - p->RIOError.Error = RTA_NUMBER_WRONG; - return -ENXIO; - } - memcpy(HostMapP->Name, MapP->Name, MAX_NAME_LEN); - return 0; - } - } - p->RIOError.Error = UNKNOWN_HOST_NUMBER; - rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum); - return -ENXIO; -} diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c deleted file mode 100644 index 8a90393faf3c..000000000000 --- a/drivers/char/rio/riotty.c +++ /dev/null @@ -1,654 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riotty.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:47 -** Retrieved : 11/6/98 10:33:50 -** -** ident @(#)riotty.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#define __EXPLICIT_DEF_H__ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#include - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" - -static void RIOClearUp(struct Port *PortP); - -/* Below belongs in func.h */ -int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg); - - -extern struct rio_info *p; - - -int riotopen(struct tty_struct *tty, struct file *filp) -{ - unsigned int SysPort; - int repeat_this = 250; - struct Port *PortP; /* pointer to the port structure */ - unsigned long flags; - int retval = 0; - - func_enter(); - - /* Make sure driver_data is NULL in case the rio isn't booted jet. Else gs_close - is going to oops. - */ - tty->driver_data = NULL; - - SysPort = rio_minor(tty); - - if (p->RIOFailed) { - rio_dprintk(RIO_DEBUG_TTY, "System initialisation failed\n"); - func_exit(); - return -ENXIO; - } - - rio_dprintk(RIO_DEBUG_TTY, "port open SysPort %d (mapped:%d)\n", SysPort, p->RIOPortp[SysPort]->Mapped); - - /* - ** Validate that we have received a legitimate request. - ** Currently, just check that we are opening a port on - ** a host card that actually exists, and that the port - ** has been mapped onto a host. - */ - if (SysPort >= RIO_PORTS) { /* out of range ? */ - rio_dprintk(RIO_DEBUG_TTY, "Illegal port number %d\n", SysPort); - func_exit(); - return -ENXIO; - } - - /* - ** Grab pointer to the port stucture - */ - PortP = p->RIOPortp[SysPort]; /* Get control struc */ - rio_dprintk(RIO_DEBUG_TTY, "PortP: %p\n", PortP); - if (!PortP->Mapped) { /* we aren't mapped yet! */ - /* - ** The system doesn't know which RTA this port - ** corresponds to. - */ - rio_dprintk(RIO_DEBUG_TTY, "port not mapped into system\n"); - func_exit(); - return -ENXIO; - } - - tty->driver_data = PortP; - - PortP->gs.port.tty = tty; - PortP->gs.port.count++; - - rio_dprintk(RIO_DEBUG_TTY, "%d bytes in tx buffer\n", PortP->gs.xmit_cnt); - - retval = gs_init_port(&PortP->gs); - if (retval) { - PortP->gs.port.count--; - return -ENXIO; - } - /* - ** If the host hasn't been booted yet, then - ** fail - */ - if ((PortP->HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_dprintk(RIO_DEBUG_TTY, "Host not running\n"); - func_exit(); - return -ENXIO; - } - - /* - ** If the RTA has not booted yet and the user has choosen to block - ** until the RTA is present then we must spin here waiting for - ** the RTA to boot. - */ - /* I find the above code a bit hairy. I find the below code - easier to read and shorter. Now, if it works too that would - be great... -- REW - */ - rio_dprintk(RIO_DEBUG_TTY, "Checking if RTA has booted... \n"); - while (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)) { - if (!PortP->WaitUntilBooted) { - rio_dprintk(RIO_DEBUG_TTY, "RTA never booted\n"); - func_exit(); - return -ENXIO; - } - - /* Under Linux you'd normally use a wait instead of this - busy-waiting. I'll stick with the old implementation for - now. --REW - */ - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "RTA_wait_for_boot: EINTR in delay \n"); - func_exit(); - return -EINTR; - } - if (repeat_this-- <= 0) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for RTA to boot timeout\n"); - func_exit(); - return -EIO; - } - } - rio_dprintk(RIO_DEBUG_TTY, "RTA has been booted\n"); - rio_spin_lock_irqsave(&PortP->portSem, flags); - if (p->RIOHalted) { - goto bombout; - } - - /* - ** If the port is in the final throws of being closed, - ** we should wait here (politely), waiting - ** for it to finish, so that it doesn't close us! - */ - while ((PortP->State & RIO_CLOSING) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for RIO_CLOSING to go away\n"); - if (repeat_this-- <= 0) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - retval = -EINTR; - goto bombout; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_spin_lock_irqsave(&PortP->portSem, flags); - retval = -EINTR; - goto bombout; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - if (!PortP->Mapped) { - rio_dprintk(RIO_DEBUG_TTY, "Port unmapped while closing!\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - retval = -ENXIO; - func_exit(); - return retval; - } - - if (p->RIOHalted) { - goto bombout; - } - -/* -** 15.10.1998 ARG - ESIL 0761 part fix -** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure, -** we need to make sure that the flags are clear when the port is opened. -*/ - /* Uh? Suppose I turn these on and then another process opens - the port again? The flags get cleared! Not good. -- REW */ - if (!(PortP->State & (RIO_LOPEN | RIO_MOPEN))) { - PortP->Config &= ~(RIO_CTSFLOW | RIO_RTSFLOW); - } - - if (!(PortP->firstOpen)) { /* First time ? */ - rio_dprintk(RIO_DEBUG_TTY, "First open for this port\n"); - - - PortP->firstOpen++; - PortP->CookMode = 0; /* XXX RIOCookMode(tp); */ - PortP->InUse = NOT_INUSE; - - /* Tentative fix for bug PR27. Didn't work. */ - /* PortP->gs.xmit_cnt = 0; */ - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - /* Someone explain to me why this delay/config is - here. If I read the docs correctly the "open" - command piggybacks the parameters immediately. - -- REW */ - RIOParam(PortP, RIOC_OPEN, 1, OK_TO_SLEEP); /* Open the port */ - rio_spin_lock_irqsave(&PortP->portSem, flags); - - /* - ** wait for the port to be not closed. - */ - while (!(PortP->PortState & PORT_ISOPEN) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for PORT_ISOPEN-currently %x\n", PortP->PortState); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for open to finish broken by signal\n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - func_exit(); - return -EINTR; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - if (p->RIOHalted) { - retval = -EIO; - bombout: - /* RIOClearUp( PortP ); */ - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - } - rio_dprintk(RIO_DEBUG_TTY, "PORT_ISOPEN found\n"); - } - rio_dprintk(RIO_DEBUG_TTY, "Modem - test for carrier\n"); - /* - ** ACTION - ** insert test for carrier here. -- ??? - ** I already see that test here. What's the deal? -- REW - */ - if ((PortP->gs.port.tty->termios->c_cflag & CLOCAL) || - (PortP->ModemState & RIOC_MSVR1_CD)) { - rio_dprintk(RIO_DEBUG_TTY, "open(%d) Modem carr on\n", SysPort); - /* - tp->tm.c_state |= CARR_ON; - wakeup((caddr_t) &tp->tm.c_canq); - */ - PortP->State |= RIO_CARR_ON; - wake_up_interruptible(&PortP->gs.port.open_wait); - } else { /* no carrier - wait for DCD */ - /* - while (!(PortP->gs.port.tty->termios->c_state & CARR_ON) && - !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted ) - */ - while (!(PortP->State & RIO_CARR_ON) && !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr on\n", SysPort); - /* - PortP->gs.port.tty->termios->c_state |= WOPEN; - */ - PortP->State |= RIO_WOPEN; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_spin_lock_irqsave(&PortP->portSem, flags); - /* - ** ACTION: verify that this is a good thing - ** to do here. -- ??? - ** I think it's OK. -- REW - */ - rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr broken by signal\n", SysPort); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - /* - tp->tm.c_state &= ~WOPEN; - */ - PortP->State &= ~RIO_WOPEN; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - return -EINTR; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - PortP->State &= ~RIO_WOPEN; - } - if (p->RIOHalted) - goto bombout; - rio_dprintk(RIO_DEBUG_TTY, "Setting RIO_MOPEN\n"); - PortP->State |= RIO_MOPEN; - - if (p->RIOHalted) - goto bombout; - - rio_dprintk(RIO_DEBUG_TTY, "high level open done\n"); - - /* - ** Count opens for port statistics reporting - */ - if (PortP->statsGather) - PortP->opens++; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_TTY, "Returning from open\n"); - func_exit(); - return 0; -} - -/* -** RIOClose the port. -** The operating system thinks that this is last close for the device. -** As there are two interfaces to the port (Modem and tty), we need to -** check that both are closed before we close the device. -*/ -int riotclose(void *ptr) -{ - struct Port *PortP = ptr; /* pointer to the port structure */ - int deleted = 0; - int try = -1; /* Disable the timeouts by setting them to -1 */ - int repeat_this = -1; /* Congrats to those having 15 years of - uptime! (You get to break the driver.) */ - unsigned long end_time; - struct tty_struct *tty; - unsigned long flags; - int rv = 0; - - rio_dprintk(RIO_DEBUG_TTY, "port close SysPort %d\n", PortP->PortNum); - - /* PortP = p->RIOPortp[SysPort]; */ - rio_dprintk(RIO_DEBUG_TTY, "Port is at address %p\n", PortP); - /* tp = PortP->TtyP; *//* Get tty */ - tty = PortP->gs.port.tty; - rio_dprintk(RIO_DEBUG_TTY, "TTY is at address %p\n", tty); - - if (PortP->gs.closing_wait) - end_time = jiffies + PortP->gs.closing_wait; - else - end_time = jiffies + MAX_SCHEDULE_TIMEOUT; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - /* - ** Setting this flag will make any process trying to open - ** this port block until we are complete closing it. - */ - PortP->State |= RIO_CLOSING; - - if ((PortP->State & RIO_DELETED)) { - rio_dprintk(RIO_DEBUG_TTY, "Close on deleted RTA\n"); - deleted = 1; - } - - if (p->RIOHalted) { - RIOClearUp(PortP); - rv = -EIO; - goto close_end; - } - - rio_dprintk(RIO_DEBUG_TTY, "Clear bits\n"); - /* - ** clear the open bits for this device - */ - PortP->State &= ~RIO_MOPEN; - PortP->State &= ~RIO_CARR_ON; - PortP->ModemState &= ~RIOC_MSVR1_CD; - /* - ** If the device was open as both a Modem and a tty line - ** then we need to wimp out here, as the port has not really - ** been finally closed (gee, whizz!) The test here uses the - ** bit for the OTHER mode of operation, to see if THAT is - ** still active! - */ - if ((PortP->State & (RIO_LOPEN | RIO_MOPEN))) { - /* - ** The port is still open for the other task - - ** return, pretending that we are still active. - */ - rio_dprintk(RIO_DEBUG_TTY, "Channel %d still open !\n", PortP->PortNum); - PortP->State &= ~RIO_CLOSING; - if (PortP->firstOpen) - PortP->firstOpen--; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EIO; - } - - rio_dprintk(RIO_DEBUG_TTY, "Closing down - everything must go!\n"); - - PortP->State &= ~RIO_DYNOROD; - - /* - ** This is where we wait for the port - ** to drain down before closing. Bye-bye.... - ** (We never meant to do this) - */ - rio_dprintk(RIO_DEBUG_TTY, "Timeout 1 starts\n"); - - if (!deleted) - while ((PortP->InUse != NOT_INUSE) && !p->RIOHalted && (PortP->TxBufferIn != PortP->TxBufferOut)) { - if (repeat_this-- <= 0) { - rv = -EINTR; - rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - goto close_end; - } - rio_dprintk(RIO_DEBUG_TTY, "Calling timeout to flush in closing\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (RIODelay_ni(PortP, HUNDRED_MS * 10) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n"); - rv = -EINTR; - rio_spin_lock_irqsave(&PortP->portSem, flags); - goto close_end; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - PortP->TxBufferIn = PortP->TxBufferOut = 0; - repeat_this = 0xff; - - PortP->InUse = 0; - if ((PortP->State & (RIO_LOPEN | RIO_MOPEN))) { - /* - ** The port has been re-opened for the other task - - ** return, pretending that we are still active. - */ - rio_dprintk(RIO_DEBUG_TTY, "Channel %d re-open!\n", PortP->PortNum); - PortP->State &= ~RIO_CLOSING; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (PortP->firstOpen) - PortP->firstOpen--; - return -EIO; - } - - if (p->RIOHalted) { - RIOClearUp(PortP); - goto close_end; - } - - /* Can't call RIOShortCommand with the port locked. */ - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - if (RIOShortCommand(p, PortP, RIOC_CLOSE, 1, 0) == RIO_FAIL) { - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - rio_spin_lock_irqsave(&PortP->portSem, flags); - goto close_end; - } - - if (!deleted) - while (try && (PortP->PortState & PORT_ISOPEN)) { - try--; - if (time_after(jiffies, end_time)) { - rio_dprintk(RIO_DEBUG_TTY, "Run out of tries - force the bugger shut!\n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - break; - } - rio_dprintk(RIO_DEBUG_TTY, "Close: PortState:ISOPEN is %d\n", PortP->PortState & PORT_ISOPEN); - - if (p->RIOHalted) { - RIOClearUp(PortP); - rio_spin_lock_irqsave(&PortP->portSem, flags); - goto close_end; - } - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - break; - } - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_TTY, "Close: try was %d on completion\n", try); - - /* RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); */ - -/* -** 15.10.1998 ARG - ESIL 0761 part fix -** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure,** we need to make sure that the flags are clear when the port is opened. -*/ - PortP->Config &= ~(RIO_CTSFLOW | RIO_RTSFLOW); - - /* - ** Count opens for port statistics reporting - */ - if (PortP->statsGather) - PortP->closes++; - -close_end: - /* XXX: Why would a "DELETED" flag be reset here? I'd have - thought that a "deleted" flag means that the port was - permanently gone, but here we can make it reappear by it - being in close during the "deletion". - */ - PortP->State &= ~(RIO_CLOSING | RIO_DELETED); - if (PortP->firstOpen) - PortP->firstOpen--; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_TTY, "Return from close\n"); - return rv; -} - - - -static void RIOClearUp(struct Port *PortP) -{ - rio_dprintk(RIO_DEBUG_TTY, "RIOHalted set\n"); - PortP->Config = 0; /* Direct semaphore */ - PortP->PortState = 0; - PortP->firstOpen = 0; - PortP->FlushCmdBodge = 0; - PortP->ModemState = PortP->CookMode = 0; - PortP->Mapped = 0; - PortP->WflushFlag = 0; - PortP->MagicFlags = 0; - PortP->RxDataStart = 0; - PortP->TxBufferIn = 0; - PortP->TxBufferOut = 0; -} - -/* -** Put a command onto a port. -** The PortPointer, command, length and arg are passed. -** The len is the length *inclusive* of the command byte, -** and so for a command that takes no data, len==1. -** The arg is a single byte, and is only used if len==2. -** Other values of len aren't allowed, and will cause -** a panic. -*/ -int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg) -{ - struct PKT __iomem *PacketP; - int retries = 20; /* at 10 per second -> 2 seconds */ - unsigned long flags; - - rio_dprintk(RIO_DEBUG_TTY, "entering shortcommand.\n"); - - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n"); - return RIO_FAIL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - - /* - ** If the port is in use for pre-emptive command, then wait for it to - ** be free again. - */ - while ((PortP->InUse != NOT_INUSE) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for not in use (%d)\n", retries); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (retries-- <= 0) { - return RIO_FAIL; - } - if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) { - return RIO_FAIL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return RIO_FAIL; - } - - while (!can_add_transmit(&PacketP, PortP) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting to add short command to queue (%d)\n", retries); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (retries-- <= 0) { - rio_dprintk(RIO_DEBUG_TTY, "out of tries. Failing\n"); - return RIO_FAIL; - } - if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) { - return RIO_FAIL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - if (p->RIOHalted) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return RIO_FAIL; - } - - /* - ** set the command byte and the argument byte - */ - writeb(command, &PacketP->data[0]); - - if (len == 2) - writeb(arg, &PacketP->data[1]); - - /* - ** set the length of the packet and set the command bit. - */ - writeb(PKT_CMD_BIT | len, &PacketP->len); - - add_transmit(PortP); - /* - ** Count characters transmitted for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += len; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return p->RIOHalted ? RIO_FAIL : ~RIO_FAIL; -} - - diff --git a/drivers/char/rio/route.h b/drivers/char/rio/route.h deleted file mode 100644 index 46e963771c30..000000000000 --- a/drivers/char/rio/route.h +++ /dev/null @@ -1,101 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* R O U T E H E A D E R - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _route_h -#define _route_h - -#define MAX_LINKS 4 -#define MAX_NODES 17 /* Maximum nodes in a subnet */ -#define NODE_BYTES ((MAX_NODES / 8) + 1) /* Number of bytes needed for - 1 bit per node */ -#define ROUTE_DATA_SIZE (NODE_BYTES + 2) /* Number of bytes for complete - info about cost etc. */ -#define ROUTES_PER_PACKET ((PKT_MAX_DATA_LEN -2)/ ROUTE_DATA_SIZE) - /* Number of nodes we can squeeze - into one packet */ -#define MAX_TOPOLOGY_PACKETS (MAX_NODES / ROUTES_PER_PACKET + 1) -/************************************************ - * Define the types of command for the ROUTE RUP. - ************************************************/ -#define ROUTE_REQUEST 0 /* Request an ID */ -#define ROUTE_FOAD 1 /* Kill the RTA */ -#define ROUTE_ALREADY 2 /* ID given already */ -#define ROUTE_USED 3 /* All ID's used */ -#define ROUTE_ALLOCATE 4 /* Here it is */ -#define ROUTE_REQ_TOP 5 /* I bet you didn't expect.... - the Topological Inquisition */ -#define ROUTE_TOPOLOGY 6 /* Topology request answered FD */ -/******************************************************************* - * Define the Route Map Structure - * - * The route map gives a pointer to a Link Structure to use. - * This allows Disconnected Links to be checked quickly - ******************************************************************/ -typedef struct COST_ROUTE COST_ROUTE; -struct COST_ROUTE { - unsigned char cost; /* Cost down this link */ - unsigned char route[NODE_BYTES]; /* Nodes through this route */ -}; - -typedef struct ROUTE_STR ROUTE_STR; -struct ROUTE_STR { - COST_ROUTE cost_route[MAX_LINKS]; - /* cost / route for this link */ - ushort favoured; /* favoured link */ -}; - - -#define NO_LINK (short) 5 /* Link unattached */ -#define ROUTE_NO_ID (short) 100 /* No Id */ -#define ROUTE_DISCONNECT (ushort) 0xff /* Not connected */ -#define ROUTE_INTERCONNECT (ushort) 0x40 /* Sub-net interconnect */ - - -#define SYNC_RUP (ushort) 255 -#define COMMAND_RUP (ushort) 254 -#define ERROR_RUP (ushort) 253 -#define POLL_RUP (ushort) 252 -#define BOOT_RUP (ushort) 251 -#define ROUTE_RUP (ushort) 250 -#define STATUS_RUP (ushort) 249 -#define POWER_RUP (ushort) 248 - -#define HIGHEST_RUP (ushort) 255 /* Set to Top one */ -#define LOWEST_RUP (ushort) 248 /* Set to bottom one */ - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/rup.h b/drivers/char/rio/rup.h deleted file mode 100644 index 4ae90cb207a9..000000000000 --- a/drivers/char/rio/rup.h +++ /dev/null @@ -1,69 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* R U P S T R U C T U R E - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _rup_h -#define _rup_h 1 - -#define MAX_RUP ((short) 16) -#define PKTS_PER_RUP ((short) 2) /* They are always used in pairs */ - -/************************************************* - * Define all the packet request stuff - ************************************************/ -#define TX_RUP_INACTIVE 0 /* Nothing to transmit */ -#define TX_PACKET_READY 1 /* Transmit packet ready */ -#define TX_LOCK_RUP 2 /* Transmit side locked */ - -#define RX_RUP_INACTIVE 0 /* Nothing received */ -#define RX_PACKET_READY 1 /* Packet received */ - -#define RUP_NO_OWNER 0xff /* RUP not owned by any process */ - -struct RUP { - u16 txpkt; /* Outgoing packet */ - u16 rxpkt; /* Incoming packet */ - u16 link; /* Which link to send down? */ - u8 rup_dest_unit[2]; /* Destination unit */ - u16 handshake; /* For handshaking */ - u16 timeout; /* Timeout */ - u16 status; /* Status */ - u16 txcontrol; /* Transmit control */ - u16 rxcontrol; /* Receive control */ -}; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/unixrup.h b/drivers/char/rio/unixrup.h deleted file mode 100644 index 7abf0cba0f2c..000000000000 --- a/drivers/char/rio/unixrup.h +++ /dev/null @@ -1,51 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : unixrup.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:20 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)unixrup.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_unixrup_h__ -#define __rio_unixrup_h__ - -/* -** UnixRup data structure. This contains pointers to actual RUPs on the -** host card, and all the command/boot control stuff. -*/ -struct UnixRup { - struct CmdBlk *CmdsWaitingP; /* Commands waiting to be done */ - struct CmdBlk *CmdPendingP; /* The command currently being sent */ - struct RUP __iomem *RupP; /* the Rup to send it to */ - unsigned int Id; /* Id number */ - unsigned int BaseSysPort; /* SysPort of first tty on this RTA */ - unsigned int ModTypes; /* Modules on this RTA */ - spinlock_t RupLock; /* Lock structure for MPX */ - /* struct lockb RupLock; *//* Lock structure for MPX */ -}; - -#endif /* __rio_unixrup_h__ */ diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c deleted file mode 100644 index 3f47c2ead8e5..000000000000 --- a/drivers/char/ser_a2232.c +++ /dev/null @@ -1,831 +0,0 @@ -/* drivers/char/ser_a2232.c */ - -/* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ - -/* Linux serial driver for the Amiga A2232 board */ - -/* This driver is MAINTAINED. Before applying any changes, please contact - * the author. - */ - -/* Copyright (c) 2000-2001 Enver Haase - * alias The A2232 driver project - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -/***************************** Documentation ************************/ -/* - * This driver is in EXPERIMENTAL state. That means I could not find - * someone with five A2232 boards with 35 ports running at 19200 bps - * at the same time and test the machine's behaviour. - * However, I know that you can performance-tweak this driver (see - * the source code). - * One thing to consider is the time this driver consumes during the - * Amiga's vertical blank interrupt. Everything that is to be done - * _IS DONE_ when entering the vertical blank interrupt handler of - * this driver. - * However, it would be more sane to only do the job for only ONE card - * instead of ALL cards at a time; or, more generally, to handle only - * SOME ports instead of ALL ports at a time. - * However, as long as no-one runs into problems I guess I shouldn't - * change the driver as it runs fine for me :) . - * - * Version history of this file: - * 0.4 Resolved licensing issues. - * 0.3 Inclusion in the Linux/m68k tree, small fixes. - * 0.2 Added documentation, minor typo fixes. - * 0.1 Initial release. - * - * TO DO: - * - Handle incoming BREAK events. I guess "Stevens: Advanced - * Programming in the UNIX(R) Environment" is a good reference - * on what is to be done. - * - When installing as a module, don't simply 'printk' text, but - * send it to the TTY used by the user. - * - * THANKS TO: - * - Jukka Marin (65EC02 code). - * - The other NetBSD developers on whose A2232 driver I had a - * pretty close look. However, I didn't copy any code so it - * is okay to put my code under the GPL and include it into - * Linux. - */ -/***************************** End of Documentation *****************/ - -/***************************** Defines ******************************/ -/* - * Enables experimental 115200 (normal) 230400 (turbo) baud rate. - * The A2232 specification states it can only operate at speeds up to - * 19200 bits per second, and I was not able to send a file via - * "sz"/"rz" and a null-modem cable from one A2232 port to another - * at 115200 bits per second. - * However, this might work for you. - */ -#undef A2232_SPEEDHACK -/* - * Default is not to use RTS/CTS so you could be talked to death. - */ -#define A2232_SUPPRESS_RTSCTS_WARNING -/************************* End of Defines ***************************/ - -/***************************** Includes *****************************/ -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#include "ser_a2232.h" -#include "ser_a2232fw.h" -/************************* End of Includes **************************/ - -/***************************** Prototypes ***************************/ -/* The interrupt service routine */ -static irqreturn_t a2232_vbl_inter(int irq, void *data); -/* Initialize the port structures */ -static void a2232_init_portstructs(void); -/* Initialize and register TTY drivers. */ -/* returns 0 IFF successful */ -static int a2232_init_drivers(void); - -/* BEGIN GENERIC_SERIAL PROTOTYPES */ -static void a2232_disable_tx_interrupts(void *ptr); -static void a2232_enable_tx_interrupts(void *ptr); -static void a2232_disable_rx_interrupts(void *ptr); -static void a2232_enable_rx_interrupts(void *ptr); -static int a2232_carrier_raised(struct tty_port *port); -static void a2232_shutdown_port(void *ptr); -static int a2232_set_real_termios(void *ptr); -static int a2232_chars_in_buffer(void *ptr); -static void a2232_close(void *ptr); -static void a2232_hungup(void *ptr); -/* static void a2232_getserial (void *ptr, struct serial_struct *sp); */ -/* END GENERIC_SERIAL PROTOTYPES */ - -/* Functions that the TTY driver struct expects */ -static int a2232_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static void a2232_throttle(struct tty_struct *tty); -static void a2232_unthrottle(struct tty_struct *tty); -static int a2232_open(struct tty_struct * tty, struct file * filp); -/************************* End of Prototypes ************************/ - -/***************************** Global variables *********************/ -/*--------------------------------------------------------------------------- - * Interface from generic_serial.c back here - *--------------------------------------------------------------------------*/ -static struct real_driver a2232_real_driver = { - a2232_disable_tx_interrupts, - a2232_enable_tx_interrupts, - a2232_disable_rx_interrupts, - a2232_enable_rx_interrupts, - a2232_shutdown_port, - a2232_set_real_termios, - a2232_chars_in_buffer, - a2232_close, - a2232_hungup, - NULL /* a2232_getserial */ -}; - -static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own. - -/* Ports structs */ -static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES]; - -/* TTY driver structs */ -static struct tty_driver *a2232_driver; - -/* nr of cards completely (all ports) and correctly configured */ -static int nr_a2232; - -/* zorro_dev structs for the A2232's */ -static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS]; -/***************************** End of Global variables **************/ - -/* Helper functions */ - -static inline volatile struct a2232memory *a2232mem(unsigned int board) -{ - return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start); -} - -static inline volatile struct a2232status *a2232stat(unsigned int board, - unsigned int portonboard) -{ - volatile struct a2232memory *mem = a2232mem(board); - return &(mem->Status[portonboard]); -} - -static inline void a2232_receive_char(struct a2232_port *port, int ch, int err) -{ -/* Mostly stolen from other drivers. - Maybe one could implement a more efficient version by not only - transferring one character at a time. -*/ - struct tty_struct *tty = port->gs.port.tty; - -#if 0 - switch(err) { - case TTY_BREAK: - break; - case TTY_PARITY: - break; - case TTY_OVERRUN: - break; - case TTY_FRAME: - break; - } -#endif - - tty_insert_flip_char(tty, ch, err); - tty_flip_buffer_push(tty); -} - -/***************************** Functions ****************************/ -/*** BEGIN OF REAL_DRIVER FUNCTIONS ***/ - -static void a2232_disable_tx_interrupts(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - stat->OutDisable = -1; - - /* Does this here really have to be? */ - local_irq_save(flags); - port->gs.port.flags &= ~GS_TX_INTEN; - local_irq_restore(flags); -} - -static void a2232_enable_tx_interrupts(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - stat->OutDisable = 0; - - /* Does this here really have to be? */ - local_irq_save(flags); - port->gs.port.flags |= GS_TX_INTEN; - local_irq_restore(flags); -} - -static void a2232_disable_rx_interrupts(void *ptr) -{ - struct a2232_port *port; - port = ptr; - port->disable_rx = -1; -} - -static void a2232_enable_rx_interrupts(void *ptr) -{ - struct a2232_port *port; - port = ptr; - port->disable_rx = 0; -} - -static int a2232_carrier_raised(struct tty_port *port) -{ - struct a2232_port *ap = container_of(port, struct a2232_port, gs.port); - return ap->cd_status; -} - -static void a2232_shutdown_port(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - - local_irq_save(flags); - - port->gs.port.flags &= ~GS_ACTIVE; - - if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { - /* Set DTR and RTS to Low, flush output. - The NetBSD driver "msc.c" does it this way. */ - stat->Command = ( (stat->Command & ~A2232CMD_CMask) | - A2232CMD_Close ); - stat->OutFlush = -1; - stat->Setup = -1; - } - - local_irq_restore(flags); - - /* After analyzing control flow, I think a2232_shutdown_port - is actually the last call from the system when at application - level someone issues a "echo Hello >>/dev/ttyY0". - Therefore I think the MOD_DEC_USE_COUNT should be here and - not in "a2232_close()". See the comment in "sx.c", too. - If you run into problems, compile this driver into the - kernel instead of compiling it as a module. */ -} - -static int a2232_set_real_termios(void *ptr) -{ - unsigned int cflag, baud, chsize, stopb, parity, softflow; - int rate; - int a2232_param, a2232_cmd; - unsigned long flags; - unsigned int i; - struct a2232_port *port = ptr; - volatile struct a2232status *status; - volatile struct a2232memory *mem; - - if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; - - status = a2232stat(port->which_a2232, port->which_port_on_a2232); - mem = a2232mem(port->which_a2232); - - a2232_param = a2232_cmd = 0; - - // get baud rate - baud = port->gs.baud; - if (baud == 0) { - /* speed == 0 -> drop DTR, do nothing else */ - local_irq_save(flags); - // Clear DTR (and RTS... mhhh). - status->Command = ( (status->Command & ~A2232CMD_CMask) | - A2232CMD_Close ); - status->OutFlush = -1; - status->Setup = -1; - - local_irq_restore(flags); - return 0; - } - - rate = A2232_BAUD_TABLE_NOAVAIL; - for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){ - if (a2232_baud_table[i] == baud){ - if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2]; - else rate = a2232_baud_table[i+1]; - } - } - if (rate == A2232_BAUD_TABLE_NOAVAIL){ - printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud); - // This is useful for both (turbo or normal) Crystal versions. - rate = A2232PARAM_B9600; - } - a2232_param |= rate; - - cflag = port->gs.port.tty->termios->c_cflag; - - // get character size - chsize = cflag & CSIZE; - switch (chsize){ - case CS8: a2232_param |= A2232PARAM_8Bit; break; - case CS7: a2232_param |= A2232PARAM_7Bit; break; - case CS6: a2232_param |= A2232PARAM_6Bit; break; - case CS5: a2232_param |= A2232PARAM_5Bit; break; - default: printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n", - port->which_a2232,port->which_port_on_a2232,chsize); - a2232_param |= A2232PARAM_8Bit; break; - } - - // get number of stop bits - stopb = cflag & CSTOPB; - if (stopb){ // two stop bits instead of one - printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n", - port->which_a2232,port->which_port_on_a2232); - } - - // Warn if RTS/CTS not wanted - if (!(cflag & CRTSCTS)){ -#ifndef A2232_SUPPRESS_RTSCTS_WARNING - printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n", - port->which_a2232,port->which_port_on_a2232); -#endif - } - - /* I think this is correct. - However, IXOFF means _input_ flow control and I wonder - if one should care about IXON _output_ flow control, - too. If this makes problems, one should turn the A2232 - firmware XON/XOFF "SoftFlow" flow control off and use - the conventional way of inserting START/STOP characters - by hand in throttle()/unthrottle(). - */ - softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF ); - - // get Parity (Enabled/Disabled? If Enabled, Odd or Even?) - parity = cflag & (PARENB | PARODD); - if (parity & PARENB){ - if (parity & PARODD){ - a2232_cmd |= A2232CMD_OddParity; - } - else{ - a2232_cmd |= A2232CMD_EvenParity; - } - } - else a2232_cmd |= A2232CMD_NoParity; - - - /* Hmm. Maybe an own a2232_port structure - member would be cleaner? */ - if (cflag & CLOCAL) - port->gs.port.flags &= ~ASYNC_CHECK_CD; - else - port->gs.port.flags |= ASYNC_CHECK_CD; - - - /* Now we have all parameters and can go to set them: */ - local_irq_save(flags); - - status->Param = a2232_param | A2232PARAM_RcvBaud; - status->Command = a2232_cmd | A2232CMD_Open | A2232CMD_Enable; - status->SoftFlow = softflow; - status->OutDisable = 0; - status->Setup = -1; - - local_irq_restore(flags); - return 0; -} - -static int a2232_chars_in_buffer(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *status; - unsigned char ret; /* we need modulo-256 arithmetics */ - port = ptr; - status = a2232stat(port->which_a2232, port->which_port_on_a2232); -#if A2232_IOBUFLEN != 256 -#error "Re-Implement a2232_chars_in_buffer()!" -#endif - ret = (status->OutHead - status->OutTail); - return ret; -} - -static void a2232_close(void *ptr) -{ - a2232_disable_tx_interrupts(ptr); - a2232_disable_rx_interrupts(ptr); - /* see the comment in a2232_shutdown_port above. */ -} - -static void a2232_hungup(void *ptr) -{ - a2232_close(ptr); -} -/*** END OF REAL_DRIVER FUNCTIONS ***/ - -/*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ -static int a2232_ioctl( struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; -} - -static void a2232_throttle(struct tty_struct *tty) -{ -/* Throttle: System cannot take another chars: Drop RTS or - send the STOP char or whatever. - The A2232 firmware does RTS/CTS anyway, and XON/XOFF - if switched on. So the only thing we can do at this - layer here is not taking any characters out of the - A2232 buffer any more. */ - struct a2232_port *port = tty->driver_data; - port->throttle_input = -1; -} - -static void a2232_unthrottle(struct tty_struct *tty) -{ -/* Unthrottle: dual to "throttle()" above. */ - struct a2232_port *port = tty->driver_data; - port->throttle_input = 0; -} - -static int a2232_open(struct tty_struct * tty, struct file * filp) -{ -/* More or less stolen from other drivers. */ - int line; - int retval; - struct a2232_port *port; - - line = tty->index; - port = &a2232_ports[line]; - - tty->driver_data = port; - port->gs.port.tty = tty; - port->gs.port.count++; - retval = gs_init_port(&port->gs); - if (retval) { - port->gs.port.count--; - return retval; - } - port->gs.port.flags |= GS_ACTIVE; - retval = gs_block_til_ready(port, filp); - - if (retval) { - port->gs.port.count--; - return retval; - } - - a2232_enable_rx_interrupts(port); - - return 0; -} -/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ - -static irqreturn_t a2232_vbl_inter(int irq, void *data) -{ -#if A2232_IOBUFLEN != 256 -#error "Re-Implement a2232_vbl_inter()!" -#endif - -struct a2232_port *port; -volatile struct a2232memory *mem; -volatile struct a2232status *status; -unsigned char newhead; -unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */ -unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */ -volatile u_char *ibuf, *cbuf, *obuf; -int ch, err, n, p; - for (n = 0; n < nr_a2232; n++){ /* for every completely initialized A2232 board */ - mem = a2232mem(n); - for (p = 0; p < NUMLINES; p++){ /* for every port on this board */ - err = 0; - port = &a2232_ports[n*NUMLINES+p]; - if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */ - - status = a2232stat(n,p); - - if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */ - newhead = status->InHead; /* 65EC02 write pointer */ - bufpos = status->InTail; - - /* check for input for this port */ - if (newhead != bufpos) { - /* buffer for input chars/events */ - ibuf = mem->InBuf[p]; - - /* data types of bytes in ibuf */ - cbuf = mem->InCtl[p]; - - /* do for all chars */ - while (bufpos != newhead) { - /* which type of input data? */ - switch (cbuf[bufpos]) { - /* switch on input event (CD, BREAK, etc.) */ - case A2232INCTL_EVENT: - switch (ibuf[bufpos++]) { - case A2232EVENT_Break: - /* TODO: Handle BREAK signal */ - break; - /* A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are - handled in a separate queue and should not occur here. */ - case A2232EVENT_Sync: - printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring."); - break; - default: - printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]); - } /* event type switch */ - break; - case A2232INCTL_CHAR: - /* Receive incoming char */ - a2232_receive_char(port, ibuf[bufpos], err); - bufpos++; - break; - default: - printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]); - bufpos++; - } /* switch on input data type */ - } /* while there's something in the buffer */ - - status->InTail = bufpos; /* tell 65EC02 what we've read */ - - } /* if there was something in the buffer */ - } /* If input is not disabled */ - - /* Now check if there's something to output */ - obuf = mem->OutBuf[p]; - bufpos = status->OutHead; - while ( (port->gs.xmit_cnt > 0) && - (!port->gs.port.tty->stopped) && - (!port->gs.port.tty->hw_stopped) ){ /* While there are chars to transmit */ - if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */ - ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */ - port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */ - obuf[bufpos++] = ch; /* put it into the A2232 buffer */ - port->gs.xmit_cnt--; - } - else{ /* If A2232 the buffer is full */ - break; /* simply stop filling it. */ - } - } - status->OutHead = bufpos; - - /* WakeUp if output buffer runs low */ - if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { - tty_wakeup(port->gs.port.tty); - } - } // if the port is used - } // for every port on the board - - /* Now check the CD message queue */ - newhead = mem->Common.CDHead; - bufpos = mem->Common.CDTail; - if (newhead != bufpos){ /* There are CD events in queue */ - ocd = mem->Common.CDStatus; /* get old status bits */ - while (newhead != bufpos){ /* read all events */ - ncd = mem->CDBuf[bufpos++]; /* get one event */ - ccd = ncd ^ ocd; /* mask of changed lines */ - ocd = ncd; /* save new status bits */ - for(p=0; p < NUMLINES; p++){ /* for all ports */ - if (ccd & 1){ /* this one changed */ - - struct a2232_port *port = &a2232_ports[n*7+p]; - port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */ - - if (!(port->gs.port.flags & ASYNC_CHECK_CD)) - ; /* Don't report DCD changes */ - else if (port->cd_status) { // if DCD on: DCD went UP! - - /* Are we blocking in open?*/ - wake_up_interruptible(&port->gs.port.open_wait); - } - else { // if DCD off: DCD went DOWN! - if (port->gs.port.tty) - tty_hangup (port->gs.port.tty); - } - - } // if CD changed for this port - ccd >>= 1; - ncd >>= 1; /* Shift bits for next line */ - } // for every port - } // while CD events in queue - mem->Common.CDStatus = ocd; /* save new status */ - mem->Common.CDTail = bufpos; /* remove events */ - } // if events in CD queue - - } // for every completely initialized A2232 board - return IRQ_HANDLED; -} - -static const struct tty_port_operations a2232_port_ops = { - .carrier_raised = a2232_carrier_raised, -}; - -static void a2232_init_portstructs(void) -{ - struct a2232_port *port; - int i; - - for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { - port = a2232_ports + i; - tty_port_init(&port->gs.port); - port->gs.port.ops = &a2232_port_ops; - port->which_a2232 = i/NUMLINES; - port->which_port_on_a2232 = i%NUMLINES; - port->disable_rx = port->throttle_input = port->cd_status = 0; - port->gs.magic = A2232_MAGIC; - port->gs.close_delay = HZ/2; - port->gs.closing_wait = 30 * HZ; - port->gs.rd = &a2232_real_driver; - } -} - -static const struct tty_operations a2232_ops = { - .open = a2232_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = a2232_ioctl, - .throttle = a2232_throttle, - .unthrottle = a2232_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, -}; - -static int a2232_init_drivers(void) -{ - int error; - - a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232); - if (!a2232_driver) - return -ENOMEM; - a2232_driver->owner = THIS_MODULE; - a2232_driver->driver_name = "commodore_a2232"; - a2232_driver->name = "ttyY"; - a2232_driver->major = A2232_NORMAL_MAJOR; - a2232_driver->type = TTY_DRIVER_TYPE_SERIAL; - a2232_driver->subtype = SERIAL_TYPE_NORMAL; - a2232_driver->init_termios = tty_std_termios; - a2232_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - a2232_driver->init_termios.c_ispeed = 9600; - a2232_driver->init_termios.c_ospeed = 9600; - a2232_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(a2232_driver, &a2232_ops); - if ((error = tty_register_driver(a2232_driver))) { - printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n", - error); - put_tty_driver(a2232_driver); - return 1; - } - return 0; -} - -static int __init a2232board_init(void) -{ - struct zorro_dev *z; - - unsigned int boardaddr; - int bcount; - short start; - u_char *from; - volatile u_char *to; - volatile struct a2232memory *mem; - int error, i; - -#ifdef CONFIG_SMP - return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */ -#endif - - if (!MACH_IS_AMIGA){ - return -ENODEV; - } - - printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */ - - z = NULL; - nr_a2232 = 0; - while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){ - if ( (z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) && - (z->id != ZORRO_PROD_CBM_A2232) ){ - continue; // The board found was no A2232 - } - if (!zorro_request_device(z,"A2232 driver")) - continue; - - printk("Commodore A2232 found (#%d).\n",nr_a2232); - - zd_a2232[nr_a2232] = z; - - boardaddr = ZTWO_VADDR( z->resource.start ); - printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start))); - - mem = (volatile struct a2232memory *) boardaddr; - - (void) mem->Enable6502Reset; /* copy the code across to the board */ - to = (u_char *)mem; from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2; - start = *(short *)from; - from += sizeof(start); - to += start; - while(bcount--) *to++ = *from++; - printk("65EC02 software uploaded to the A2232 memory.\n"); - - mem->Common.Crystal = A2232_UNKNOWN; /* use automatic speed check */ - - /* start 6502 running */ - (void) mem->ResetBoard; - printk("A2232's 65EC02 CPU up and running.\n"); - - /* wait until speed detector has finished */ - for (bcount = 0; bcount < 2000; bcount++) { - udelay(1000); - if (mem->Common.Crystal) - break; - } - printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: ")); - switch (mem->Common.Crystal){ - case A2232_UNKNOWN: - printk("Unknown crystal.\n"); - break; - case A2232_NORMAL: - printk ("Normal crystal.\n"); - break; - case A2232_TURBO: - printk ("Turbo crystal.\n"); - break; - default: - printk ("0x%x. Huh?\n",mem->Common.Crystal); - } - - nr_a2232++; - - } - - printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */ - - a2232_init_portstructs(); - - /* - a2232_init_drivers also registers the drivers. Must be here because all boards - have to be detected first. - */ - if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx? - - error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, - "A2232 serial VBL", a2232_driver_ID); - if (error) { - for (i = 0; i < nr_a2232; i++) - zorro_release_device(zd_a2232[i]); - tty_unregister_driver(a2232_driver); - put_tty_driver(a2232_driver); - } - return error; -} - -static void __exit a2232board_exit(void) -{ - int i; - - for (i = 0; i < nr_a2232; i++) { - zorro_release_device(zd_a2232[i]); - } - - tty_unregister_driver(a2232_driver); - put_tty_driver(a2232_driver); - free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID); -} - -module_init(a2232board_init); -module_exit(a2232board_exit); - -MODULE_AUTHOR("Enver Haase"); -MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/char/ser_a2232.h b/drivers/char/ser_a2232.h deleted file mode 100644 index bc09eb9e118b..000000000000 --- a/drivers/char/ser_a2232.h +++ /dev/null @@ -1,202 +0,0 @@ -/* drivers/char/ser_a2232.h */ - -/* $Id: ser_a2232.h,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ - -/* Linux serial driver for the Amiga A2232 board */ - -/* This driver is MAINTAINED. Before applying any changes, please contact - * the author. - */ - -/* Copyright (c) 2000-2001 Enver Haase - * alias The A2232 driver project - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef _SER_A2232_H_ -#define _SER_A2232_H_ - -/* - How many boards are to be supported at maximum; - "up to five A2232 Multiport Serial Cards may be installed in a - single Amiga 2000" states the A2232 User's Guide. If you have - more slots available, you might want to change the value below. -*/ -#define MAX_A2232_BOARDS 5 - -#ifndef A2232_NORMAL_MAJOR -/* This allows overriding on the compiler commandline, or in a "major.h" - include or something like that */ -#define A2232_NORMAL_MAJOR 224 /* /dev/ttyY* */ -#define A2232_CALLOUT_MAJOR 225 /* /dev/cuy* */ -#endif - -/* Some magic is always good - Who knows :) */ -#define A2232_MAGIC 0x000a2232 - -/* A2232 port structure to keep track of the - status of every single line used */ -struct a2232_port{ - struct gs_port gs; - unsigned int which_a2232; - unsigned int which_port_on_a2232; - short disable_rx; - short throttle_input; - short cd_status; -}; - -#define NUMLINES 7 /* number of lines per board */ -#define A2232_IOBUFLEN 256 /* number of bytes per buffer */ -#define A2232_IOBUFLENMASK 0xff /* mask for maximum number of bytes */ - - -#define A2232_UNKNOWN 0 /* crystal not known */ -#define A2232_NORMAL 1 /* normal A2232 (1.8432 MHz oscillator) */ -#define A2232_TURBO 2 /* turbo A2232 (3.6864 MHz oscillator) */ - - -struct a2232common { - char Crystal; /* normal (1) or turbo (2) board? */ - u_char Pad_a; - u_char TimerH; /* timer value after speed check */ - u_char TimerL; - u_char CDHead; /* head pointer for CD message queue */ - u_char CDTail; /* tail pointer for CD message queue */ - u_char CDStatus; - u_char Pad_b; -}; - -struct a2232status { - u_char InHead; /* input queue head */ - u_char InTail; /* input queue tail */ - u_char OutDisable; /* disables output */ - u_char OutHead; /* output queue head */ - u_char OutTail; /* output queue tail */ - u_char OutCtrl; /* soft flow control character to send */ - u_char OutFlush; /* flushes output buffer */ - u_char Setup; /* causes reconfiguration */ - u_char Param; /* parameter byte - see A2232PARAM */ - u_char Command; /* command byte - see A2232CMD */ - u_char SoftFlow; /* enables xon/xoff flow control */ - /* private 65EC02 fields: */ - u_char XonOff; /* stores XON/XOFF enable/disable */ -}; - -#define A2232_MEMPAD1 \ - (0x0200 - NUMLINES * sizeof(struct a2232status) - \ - sizeof(struct a2232common)) -#define A2232_MEMPAD2 (0x2000 - NUMLINES * A2232_IOBUFLEN - A2232_IOBUFLEN) - -struct a2232memory { - struct a2232status Status[NUMLINES]; /* 0x0000-0x006f status areas */ - struct a2232common Common; /* 0x0070-0x0077 common flags */ - u_char Dummy1[A2232_MEMPAD1]; /* 0x00XX-0x01ff */ - u_char OutBuf[NUMLINES][A2232_IOBUFLEN];/* 0x0200-0x08ff output bufs */ - u_char InBuf[NUMLINES][A2232_IOBUFLEN]; /* 0x0900-0x0fff input bufs */ - u_char InCtl[NUMLINES][A2232_IOBUFLEN]; /* 0x1000-0x16ff control data */ - u_char CDBuf[A2232_IOBUFLEN]; /* 0x1700-0x17ff CD event buffer */ - u_char Dummy2[A2232_MEMPAD2]; /* 0x1800-0x2fff */ - u_char Code[0x1000]; /* 0x3000-0x3fff code area */ - u_short InterruptAck; /* 0x4000 intr ack */ - u_char Dummy3[0x3ffe]; /* 0x4002-0x7fff */ - u_short Enable6502Reset; /* 0x8000 Stop board, */ - /* 6502 RESET line held low */ - u_char Dummy4[0x3ffe]; /* 0x8002-0xbfff */ - u_short ResetBoard; /* 0xc000 reset board & run, */ - /* 6502 RESET line held high */ -}; - -#undef A2232_MEMPAD1 -#undef A2232_MEMPAD2 - -#define A2232INCTL_CHAR 0 /* corresponding byte in InBuf is a character */ -#define A2232INCTL_EVENT 1 /* corresponding byte in InBuf is an event */ - -#define A2232EVENT_Break 1 /* break set */ -#define A2232EVENT_CarrierOn 2 /* carrier raised */ -#define A2232EVENT_CarrierOff 3 /* carrier dropped */ -#define A2232EVENT_Sync 4 /* don't know, defined in 2232.ax */ - -#define A2232CMD_Enable 0x1 /* enable/DTR bit */ -#define A2232CMD_Close 0x2 /* close the device */ -#define A2232CMD_Open 0xb /* open the device */ -#define A2232CMD_CMask 0xf /* command mask */ -#define A2232CMD_RTSOff 0x0 /* turn off RTS */ -#define A2232CMD_RTSOn 0x8 /* turn on RTS */ -#define A2232CMD_Break 0xd /* transmit a break */ -#define A2232CMD_RTSMask 0xc /* mask for RTS stuff */ -#define A2232CMD_NoParity 0x00 /* don't use parity */ -#define A2232CMD_OddParity 0x20 /* odd parity */ -#define A2232CMD_EvenParity 0x60 /* even parity */ -#define A2232CMD_ParityMask 0xe0 /* parity mask */ - -#define A2232PARAM_B115200 0x0 /* baud rates */ -#define A2232PARAM_B50 0x1 -#define A2232PARAM_B75 0x2 -#define A2232PARAM_B110 0x3 -#define A2232PARAM_B134 0x4 -#define A2232PARAM_B150 0x5 -#define A2232PARAM_B300 0x6 -#define A2232PARAM_B600 0x7 -#define A2232PARAM_B1200 0x8 -#define A2232PARAM_B1800 0x9 -#define A2232PARAM_B2400 0xa -#define A2232PARAM_B3600 0xb -#define A2232PARAM_B4800 0xc -#define A2232PARAM_B7200 0xd -#define A2232PARAM_B9600 0xe -#define A2232PARAM_B19200 0xf -#define A2232PARAM_BaudMask 0xf /* baud rate mask */ -#define A2232PARAM_RcvBaud 0x10 /* enable receive baud rate */ -#define A2232PARAM_8Bit 0x00 /* numbers of bits */ -#define A2232PARAM_7Bit 0x20 -#define A2232PARAM_6Bit 0x40 -#define A2232PARAM_5Bit 0x60 -#define A2232PARAM_BitMask 0x60 /* numbers of bits mask */ - - -/* Standard speeds tables, -1 means unavailable, -2 means 0 baud: switch off line */ -#define A2232_BAUD_TABLE_NOAVAIL -1 -#define A2232_BAUD_TABLE_NUM_RATES (18) -static int a2232_baud_table[A2232_BAUD_TABLE_NUM_RATES*3] = { - //Baud //Normal //Turbo - 50, A2232PARAM_B50, A2232_BAUD_TABLE_NOAVAIL, - 75, A2232PARAM_B75, A2232_BAUD_TABLE_NOAVAIL, - 110, A2232PARAM_B110, A2232_BAUD_TABLE_NOAVAIL, - 134, A2232PARAM_B134, A2232_BAUD_TABLE_NOAVAIL, - 150, A2232PARAM_B150, A2232PARAM_B75, - 200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, - 300, A2232PARAM_B300, A2232PARAM_B150, - 600, A2232PARAM_B600, A2232PARAM_B300, - 1200, A2232PARAM_B1200, A2232PARAM_B600, - 1800, A2232PARAM_B1800, A2232_BAUD_TABLE_NOAVAIL, - 2400, A2232PARAM_B2400, A2232PARAM_B1200, - 4800, A2232PARAM_B4800, A2232PARAM_B2400, - 9600, A2232PARAM_B9600, A2232PARAM_B4800, - 19200, A2232PARAM_B19200, A2232PARAM_B9600, - 38400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B19200, - 57600, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, -#ifdef A2232_SPEEDHACK - 115200, A2232PARAM_B115200, A2232_BAUD_TABLE_NOAVAIL, - 230400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B115200 -#else - 115200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, - 230400, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL -#endif -}; -#endif diff --git a/drivers/char/ser_a2232fw.ax b/drivers/char/ser_a2232fw.ax deleted file mode 100644 index 736438032768..000000000000 --- a/drivers/char/ser_a2232fw.ax +++ /dev/null @@ -1,529 +0,0 @@ -;.lib "axm" -; -;begin -;title "A2232 serial board driver" -; -;set modules "2232" -;set executable "2232.bin" -; -;;;;set nolink -; -;set temporary directory "t:" -; -;set assembly options "-m6502 -l60:t:list" -;set link options "bin"; loadadr" -;;;bin2c 2232.bin msc6502.h msc6502code -;end -; -; -; ### Commodore A2232 serial board driver for NetBSD by JM v1.3 ### -; -; - Created 950501 by JM - -; -; -; Serial board driver software. -; -; -% Copyright (c) 1995 Jukka Marin . -% All rights reserved. -% -% Redistribution and use in source and binary forms, with or without -% modification, are permitted provided that the following conditions -% are met: -% 1. Redistributions of source code must retain the above copyright -% notice, and the entire permission notice in its entirety, -% including the disclaimer of warranties. -% 2. Redistributions in binary form must reproduce the above copyright -% notice, this list of conditions and the following disclaimer in the -% documentation and/or other materials provided with the distribution. -% 3. The name of the author may not be used to endorse or promote -% products derived from this software without specific prior -% written permission. -% -% ALTERNATIVELY, this product may be distributed under the terms of -% the GNU General Public License, in which case the provisions of the -% GPL are required INSTEAD OF the above restrictions. (This clause is -% necessary due to a potential bad interaction between the GPL and -% the restrictions contained in a BSD-style copyright.) -% -% THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED -% WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -% OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -% DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, -% INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -% (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -% SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -% HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -% STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED -% OF THE POSSIBILITY OF SUCH DAMAGE. -; -; -; Bugs: -; -; - Can't send a break yet -; -; -; -; Edited: -; -; - 950501 by JM -> v0.1 - Created this file. -; - 951029 by JM -> v1.3 - Carrier Detect events now queued in a separate -; queue. -; -; - - -CODE equ $3800 ; start address for program code - - -CTL_CHAR equ $00 ; byte in ibuf is a character -CTL_EVENT equ $01 ; byte in ibuf is an event - -EVENT_BREAK equ $01 -EVENT_CDON equ $02 -EVENT_CDOFF equ $03 -EVENT_SYNC equ $04 - -XON equ $11 -XOFF equ $13 - - -VARBASE macro *starting_address ; was VARINIT -_varbase set \1 - endm - -VARDEF macro *name space_needs -\1 equ _varbase -_varbase set _varbase+\2 - endm - - -stz macro * address - db $64,\1 - endm - -stzax macro * address - db $9e,<\1,>\1 - endm - - -biti macro * immediate value - db $89,\1 - endm - -smb0 macro * address - db $87,\1 - endm -smb1 macro * address - db $97,\1 - endm -smb2 macro * address - db $a7,\1 - endm -smb3 macro * address - db $b7,\1 - endm -smb4 macro * address - db $c7,\1 - endm -smb5 macro * address - db $d7,\1 - endm -smb6 macro * address - db $e7,\1 - endm -smb7 macro * address - db $f7,\1 - endm - - - -;-----------------------------------------------------------------------; -; ; -; stuff common for all ports, non-critical (run once / loop) ; -; ; -DO_SLOW macro * port_number ; - .local ; ; - lda CIA+C_PA ; check all CD inputs ; - cmp CommonCDo ; changed from previous accptd? ; - beq =over ; nope, do nothing else here ; - ; ; - cmp CommonCDb ; bouncing? ; - beq =nobounce ; nope -> ; - ; ; - sta CommonCDb ; save current state ; - lda #64 ; reinitialize counter ; - sta CommonCDc ; ; - jmp =over ; skip CD save ; - ; ; -=nobounce dec CommonCDc ; no, decrement bounce counter ; - bpl =over ; not done yet, so skip CD save ; - ; ; -=saveCD ldx CDHead ; get write index ; - sta cdbuf,x ; save status in buffer ; - inx ; ; - cpx CDTail ; buffer full? ; - .if ne ; no: preserve status: ; - stx CDHead ; update index in RAM ; - sta CommonCDo ; save state for the next check ; - .end ; ; -=over .end local ; - endm ; - ; -;-----------------------------------------------------------------------; - - -; port specific stuff (no data transfer) - -DO_PORT macro * port_number - .local ; ; - lda SetUp\1 ; reconfiguration request? ; - .if ne ; yes: ; - lda SoftFlow\1 ; get XON/XOFF flag ; - sta XonOff\1 ; save it ; - lda Param\1 ; get parameter ; - ora #%00010000 ; use baud generator for Rx ; - sta ACIA\1+A_CTRL ; store in control register ; - stz OutDisable\1 ; enable transmit output ; - stz SetUp\1 ; no reconfiguration no more ; - .end ; ; - ; ; - lda InHead\1 ; get write index ; - sbc InTail\1 ; buffer full soon? ; - cmp #200 ; 200 chars or more in buffer? ; - lda Command\1 ; get Command reg value ; - and #%11110011 ; turn RTS OFF by default ; - .if cc ; still room in buffer: ; - ora #%00001000 ; turn RTS ON ; - .end ; ; - sta ACIA\1+A_CMD ; set/clear RTS ; - ; ; - lda OutFlush\1 ; request to flush output buffer; - .if ne ; yessh! ; - lda OutHead\1 ; get head ; - sta OutTail\1 ; save as tail ; - stz OutDisable\1 ; enable transmit output ; - stz OutFlush\1 ; clear request ; - .end - .end local - endm - - -DO_DATA macro * port number - .local - lda ACIA\1+A_SR ; read ACIA status register ; - biti [1<<3] ; something received? ; - .if ne ; yes: ; - biti [1<<1] ; framing error? ; - .if ne ; yes: ; - lda ACIA\1+A_DATA ; read received character ; - bne =SEND ; not break -> ignore it ; - ldx InHead\1 ; get write pointer ; - lda #CTL_EVENT ; get type of byte ; - sta ictl\1,x ; save it in InCtl buffer ; - lda #EVENT_BREAK ; event code ; - sta ibuf\1,x ; save it as well ; - inx ; ; - cpx InTail\1 ; still room in buffer? ; - .if ne ; absolutely: ; - stx InHead\1 ; update index in memory ; - .end ; ; - jmp =SEND ; go check if anything to send ; - .end ; ; - ; normal char received: ; - ldx InHead\1 ; get write index ; - lda ACIA\1+A_DATA ; read received character ; - sta ibuf\1,x ; save char in buffer ; - stzax ictl\1 ; set type to CTL_CHAR ; - inx ; ; - cpx InTail\1 ; buffer full? ; - .if ne ; no: preserve character: ; - stx InHead\1 ; update index in RAM ; - .end ; ; - and #$7f ; mask off parity if any ; - cmp #XOFF ; XOFF from remote host? ; - .if eq ; yes: ; - lda XonOff\1 ; if XON/XOFF handshaking.. ; - sta OutDisable\1 ; ..disable transmitter ; - .end ; ; - .end ; ; - ; ; - ; BUFFER FULL CHECK WAS HERE ; - ; ; -=SEND lda ACIA\1+A_SR ; transmit register empty? ; - and #[1<<4] ; ; - .if ne ; yes: ; - ldx OutCtrl\1 ; sending out XON/XOFF? ; - .if ne ; yes: ; - lda CIA+C_PB ; check CTS signal ; - and #[1<<\1] ; (for this port only) ; - bne =DONE ; not allowed to send -> done ; - stx ACIA\1+A_DATA ; transmit control char ; - stz OutCtrl\1 ; clear flag ; - jmp =DONE ; and we're done ; - .end ; ; - ; ; - ldx OutTail\1 ; anything to transmit? ; - cpx OutHead\1 ; ; - .if ne ; yes: ; - lda OutDisable\1 ; allowed to transmit? ; - .if eq ; yes: ; - lda CIA+C_PB ; check CTS signal ; - and #[1<<\1] ; (for this port only) ; - bne =DONE ; not allowed to send -> done ; - lda obuf\1,x ; get a char from buffer ; - sta ACIA\1+A_DATA ; send it away ; - inc OutTail\1 ; update read index ; - .end ; ; - .end ; ; - .end ; ; -=DONE .end local - endm - - - -PORTVAR macro * port number - VARDEF InHead\1 1 - VARDEF InTail\1 1 - VARDEF OutDisable\1 1 - VARDEF OutHead\1 1 - VARDEF OutTail\1 1 - VARDEF OutCtrl\1 1 - VARDEF OutFlush\1 1 - VARDEF SetUp\1 1 - VARDEF Param\1 1 - VARDEF Command\1 1 - VARDEF SoftFlow\1 1 - ; private: - VARDEF XonOff\1 1 - endm - - - VARBASE 0 ; start variables at address $0000 - PORTVAR 0 ; define variables for port 0 - PORTVAR 1 ; define variables for port 1 - PORTVAR 2 ; define variables for port 2 - PORTVAR 3 ; define variables for port 3 - PORTVAR 4 ; define variables for port 4 - PORTVAR 5 ; define variables for port 5 - PORTVAR 6 ; define variables for port 6 - - - - VARDEF Crystal 1 ; 0 = unknown, 1 = normal, 2 = turbo - VARDEF Pad_a 1 - VARDEF TimerH 1 - VARDEF TimerL 1 - VARDEF CDHead 1 - VARDEF CDTail 1 - VARDEF CDStatus 1 - VARDEF Pad_b 1 - - VARDEF CommonCDo 1 ; for carrier detect optimization - VARDEF CommonCDc 1 ; for carrier detect debouncing - VARDEF CommonCDb 1 ; for carrier detect debouncing - - - VARBASE $0200 - VARDEF obuf0 256 ; output data (characters only) - VARDEF obuf1 256 - VARDEF obuf2 256 - VARDEF obuf3 256 - VARDEF obuf4 256 - VARDEF obuf5 256 - VARDEF obuf6 256 - - VARDEF ibuf0 256 ; input data (characters, events etc - see ictl) - VARDEF ibuf1 256 - VARDEF ibuf2 256 - VARDEF ibuf3 256 - VARDEF ibuf4 256 - VARDEF ibuf5 256 - VARDEF ibuf6 256 - - VARDEF ictl0 256 ; input control information (type of data in ibuf) - VARDEF ictl1 256 - VARDEF ictl2 256 - VARDEF ictl3 256 - VARDEF ictl4 256 - VARDEF ictl5 256 - VARDEF ictl6 256 - - VARDEF cdbuf 256 ; CD event queue - - -ACIA0 equ $4400 -ACIA1 equ $4c00 -ACIA2 equ $5400 -ACIA3 equ $5c00 -ACIA4 equ $6400 -ACIA5 equ $6c00 -ACIA6 equ $7400 - -A_DATA equ $00 -A_SR equ $02 -A_CMD equ $04 -A_CTRL equ $06 -; 00 write transmit data read received data -; 02 reset ACIA read status register -; 04 write command register read command register -; 06 write control register read control register - -CIA equ $7c00 ; 8520 CIA -C_PA equ $00 ; port A data register -C_PB equ $02 ; port B data register -C_DDRA equ $04 ; data direction register for port A -C_DDRB equ $06 ; data direction register for port B -C_TAL equ $08 ; timer A -C_TAH equ $0a -C_TBL equ $0c ; timer B -C_TBH equ $0e -C_TODL equ $10 ; TOD LSB -C_TODM equ $12 ; TOD middle byte -C_TODH equ $14 ; TOD MSB -C_DATA equ $18 ; serial data register -C_INTCTRL equ $1a ; interrupt control register -C_CTRLA equ $1c ; control register A -C_CTRLB equ $1e ; control register B - - - - - - section main,code,CODE-2 - - db >CODE,. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, and the entire permission notice in its entirety, - * including the disclaimer of warranties. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote - * products derived from this software without specific prior - * written permission. - * - * ALTERNATIVELY, this product may be distributed under the terms of - * the GNU Public License, in which case the provisions of the GPL are - * required INSTEAD OF the above restrictions. (This clause is - * necessary due to a potential bad interaction between the GPL and - * the restrictions contained in a BSD-style copyright.) - * - * THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - -/* This is the 65EC02 code by Jukka Marin that is executed by - the A2232's 65EC02 processor (base address: 0x3800) - Source file: ser_a2232fw.ax - Version: 1.3 (951029) - Known Bugs: Cannot send a break yet -*/ -static unsigned char a2232_65EC02code[] = { - 0x38, 0x00, 0xA2, 0xFF, 0x9A, 0xD8, 0xA2, 0x00, - 0xA9, 0x00, 0xA0, 0x54, 0x95, 0x00, 0xE8, 0x88, - 0xD0, 0xFA, 0x64, 0x5C, 0x64, 0x5E, 0x64, 0x58, - 0x64, 0x59, 0xA9, 0x00, 0x85, 0x55, 0xA9, 0xAA, - 0xC9, 0x64, 0x90, 0x02, 0xE6, 0x55, 0xA5, 0x54, - 0xF0, 0x03, 0x4C, 0x92, 0x38, 0xA9, 0x98, 0x8D, - 0x06, 0x44, 0xA9, 0x0B, 0x8D, 0x04, 0x44, 0xAD, - 0x02, 0x44, 0xA9, 0x80, 0x8D, 0x1A, 0x7C, 0xA9, - 0xFF, 0x8D, 0x08, 0x7C, 0x8D, 0x0A, 0x7C, 0xA2, - 0x00, 0x8E, 0x00, 0x44, 0xEA, 0xEA, 0xAD, 0x02, - 0x44, 0xEA, 0xEA, 0x8E, 0x00, 0x44, 0xAD, 0x02, - 0x44, 0x29, 0x10, 0xF0, 0xF9, 0xA9, 0x11, 0x8E, - 0x00, 0x44, 0x8D, 0x1C, 0x7C, 0xAD, 0x02, 0x44, - 0x29, 0x10, 0xF0, 0xF9, 0x8E, 0x1C, 0x7C, 0xAD, - 0x08, 0x7C, 0x85, 0x57, 0xAD, 0x0A, 0x7C, 0x85, - 0x56, 0xC9, 0xD0, 0x90, 0x05, 0xA9, 0x02, 0x4C, - 0x82, 0x38, 0xA9, 0x01, 0x85, 0x54, 0xA9, 0x00, - 0x8D, 0x02, 0x44, 0x8D, 0x06, 0x44, 0x8D, 0x04, - 0x44, 0x4C, 0x92, 0x38, 0xAD, 0x00, 0x7C, 0xC5, - 0x5C, 0xF0, 0x1F, 0xC5, 0x5E, 0xF0, 0x09, 0x85, - 0x5E, 0xA9, 0x40, 0x85, 0x5D, 0x4C, 0xB8, 0x38, - 0xC6, 0x5D, 0x10, 0x0E, 0xA6, 0x58, 0x9D, 0x00, - 0x17, 0xE8, 0xE4, 0x59, 0xF0, 0x04, 0x86, 0x58, - 0x85, 0x5C, 0x20, 0x23, 0x3A, 0xA5, 0x07, 0xF0, - 0x0F, 0xA5, 0x0A, 0x85, 0x0B, 0xA5, 0x08, 0x09, - 0x10, 0x8D, 0x06, 0x44, 0x64, 0x02, 0x64, 0x07, - 0xA5, 0x00, 0xE5, 0x01, 0xC9, 0xC8, 0xA5, 0x09, - 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, - 0x44, 0xA5, 0x06, 0xF0, 0x08, 0xA5, 0x03, 0x85, - 0x04, 0x64, 0x02, 0x64, 0x06, 0x20, 0x23, 0x3A, - 0xA5, 0x13, 0xF0, 0x0F, 0xA5, 0x16, 0x85, 0x17, - 0xA5, 0x14, 0x09, 0x10, 0x8D, 0x06, 0x4C, 0x64, - 0x0E, 0x64, 0x13, 0xA5, 0x0C, 0xE5, 0x0D, 0xC9, - 0xC8, 0xA5, 0x15, 0x29, 0xF3, 0xB0, 0x02, 0x09, - 0x08, 0x8D, 0x04, 0x4C, 0xA5, 0x12, 0xF0, 0x08, - 0xA5, 0x0F, 0x85, 0x10, 0x64, 0x0E, 0x64, 0x12, - 0x20, 0x23, 0x3A, 0xA5, 0x1F, 0xF0, 0x0F, 0xA5, - 0x22, 0x85, 0x23, 0xA5, 0x20, 0x09, 0x10, 0x8D, - 0x06, 0x54, 0x64, 0x1A, 0x64, 0x1F, 0xA5, 0x18, - 0xE5, 0x19, 0xC9, 0xC8, 0xA5, 0x21, 0x29, 0xF3, - 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, 0x54, 0xA5, - 0x1E, 0xF0, 0x08, 0xA5, 0x1B, 0x85, 0x1C, 0x64, - 0x1A, 0x64, 0x1E, 0x20, 0x23, 0x3A, 0xA5, 0x2B, - 0xF0, 0x0F, 0xA5, 0x2E, 0x85, 0x2F, 0xA5, 0x2C, - 0x09, 0x10, 0x8D, 0x06, 0x5C, 0x64, 0x26, 0x64, - 0x2B, 0xA5, 0x24, 0xE5, 0x25, 0xC9, 0xC8, 0xA5, - 0x2D, 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, - 0x04, 0x5C, 0xA5, 0x2A, 0xF0, 0x08, 0xA5, 0x27, - 0x85, 0x28, 0x64, 0x26, 0x64, 0x2A, 0x20, 0x23, - 0x3A, 0xA5, 0x37, 0xF0, 0x0F, 0xA5, 0x3A, 0x85, - 0x3B, 0xA5, 0x38, 0x09, 0x10, 0x8D, 0x06, 0x64, - 0x64, 0x32, 0x64, 0x37, 0xA5, 0x30, 0xE5, 0x31, - 0xC9, 0xC8, 0xA5, 0x39, 0x29, 0xF3, 0xB0, 0x02, - 0x09, 0x08, 0x8D, 0x04, 0x64, 0xA5, 0x36, 0xF0, - 0x08, 0xA5, 0x33, 0x85, 0x34, 0x64, 0x32, 0x64, - 0x36, 0x20, 0x23, 0x3A, 0xA5, 0x43, 0xF0, 0x0F, - 0xA5, 0x46, 0x85, 0x47, 0xA5, 0x44, 0x09, 0x10, - 0x8D, 0x06, 0x6C, 0x64, 0x3E, 0x64, 0x43, 0xA5, - 0x3C, 0xE5, 0x3D, 0xC9, 0xC8, 0xA5, 0x45, 0x29, - 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, 0x6C, - 0xA5, 0x42, 0xF0, 0x08, 0xA5, 0x3F, 0x85, 0x40, - 0x64, 0x3E, 0x64, 0x42, 0x20, 0x23, 0x3A, 0xA5, - 0x4F, 0xF0, 0x0F, 0xA5, 0x52, 0x85, 0x53, 0xA5, - 0x50, 0x09, 0x10, 0x8D, 0x06, 0x74, 0x64, 0x4A, - 0x64, 0x4F, 0xA5, 0x48, 0xE5, 0x49, 0xC9, 0xC8, - 0xA5, 0x51, 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, - 0x8D, 0x04, 0x74, 0xA5, 0x4E, 0xF0, 0x08, 0xA5, - 0x4B, 0x85, 0x4C, 0x64, 0x4A, 0x64, 0x4E, 0x20, - 0x23, 0x3A, 0x4C, 0x92, 0x38, 0xAD, 0x02, 0x44, - 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, - 0xAD, 0x00, 0x44, 0xD0, 0x32, 0xA6, 0x00, 0xA9, - 0x01, 0x9D, 0x00, 0x10, 0xA9, 0x01, 0x9D, 0x00, - 0x09, 0xE8, 0xE4, 0x01, 0xF0, 0x02, 0x86, 0x00, - 0x4C, 0x65, 0x3A, 0xA6, 0x00, 0xAD, 0x00, 0x44, - 0x9D, 0x00, 0x09, 0x9E, 0x00, 0x10, 0xE8, 0xE4, - 0x01, 0xF0, 0x02, 0x86, 0x00, 0x29, 0x7F, 0xC9, - 0x13, 0xD0, 0x04, 0xA5, 0x0B, 0x85, 0x02, 0xAD, - 0x02, 0x44, 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x05, - 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x01, 0xD0, - 0x21, 0x8E, 0x00, 0x44, 0x64, 0x05, 0x4C, 0x98, - 0x3A, 0xA6, 0x04, 0xE4, 0x03, 0xF0, 0x13, 0xA5, - 0x02, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x01, - 0xD0, 0x08, 0xBD, 0x00, 0x02, 0x8D, 0x00, 0x44, - 0xE6, 0x04, 0xAD, 0x02, 0x4C, 0x89, 0x08, 0xF0, - 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, 0x4C, - 0xD0, 0x32, 0xA6, 0x0C, 0xA9, 0x01, 0x9D, 0x00, - 0x11, 0xA9, 0x01, 0x9D, 0x00, 0x0A, 0xE8, 0xE4, - 0x0D, 0xF0, 0x02, 0x86, 0x0C, 0x4C, 0xDA, 0x3A, - 0xA6, 0x0C, 0xAD, 0x00, 0x4C, 0x9D, 0x00, 0x0A, - 0x9E, 0x00, 0x11, 0xE8, 0xE4, 0x0D, 0xF0, 0x02, - 0x86, 0x0C, 0x29, 0x7F, 0xC9, 0x13, 0xD0, 0x04, - 0xA5, 0x17, 0x85, 0x0E, 0xAD, 0x02, 0x4C, 0x29, - 0x10, 0xF0, 0x2C, 0xA6, 0x11, 0xF0, 0x0F, 0xAD, - 0x02, 0x7C, 0x29, 0x02, 0xD0, 0x21, 0x8E, 0x00, - 0x4C, 0x64, 0x11, 0x4C, 0x0D, 0x3B, 0xA6, 0x10, - 0xE4, 0x0F, 0xF0, 0x13, 0xA5, 0x0E, 0xD0, 0x0F, - 0xAD, 0x02, 0x7C, 0x29, 0x02, 0xD0, 0x08, 0xBD, - 0x00, 0x03, 0x8D, 0x00, 0x4C, 0xE6, 0x10, 0xAD, - 0x02, 0x54, 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, - 0xF0, 0x1B, 0xAD, 0x00, 0x54, 0xD0, 0x32, 0xA6, - 0x18, 0xA9, 0x01, 0x9D, 0x00, 0x12, 0xA9, 0x01, - 0x9D, 0x00, 0x0B, 0xE8, 0xE4, 0x19, 0xF0, 0x02, - 0x86, 0x18, 0x4C, 0x4F, 0x3B, 0xA6, 0x18, 0xAD, - 0x00, 0x54, 0x9D, 0x00, 0x0B, 0x9E, 0x00, 0x12, - 0xE8, 0xE4, 0x19, 0xF0, 0x02, 0x86, 0x18, 0x29, - 0x7F, 0xC9, 0x13, 0xD0, 0x04, 0xA5, 0x23, 0x85, - 0x1A, 0xAD, 0x02, 0x54, 0x29, 0x10, 0xF0, 0x2C, - 0xA6, 0x1D, 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, - 0x04, 0xD0, 0x21, 0x8E, 0x00, 0x54, 0x64, 0x1D, - 0x4C, 0x82, 0x3B, 0xA6, 0x1C, 0xE4, 0x1B, 0xF0, - 0x13, 0xA5, 0x1A, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, - 0x29, 0x04, 0xD0, 0x08, 0xBD, 0x00, 0x04, 0x8D, - 0x00, 0x54, 0xE6, 0x1C, 0xAD, 0x02, 0x5C, 0x89, - 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, - 0x00, 0x5C, 0xD0, 0x32, 0xA6, 0x24, 0xA9, 0x01, - 0x9D, 0x00, 0x13, 0xA9, 0x01, 0x9D, 0x00, 0x0C, - 0xE8, 0xE4, 0x25, 0xF0, 0x02, 0x86, 0x24, 0x4C, - 0xC4, 0x3B, 0xA6, 0x24, 0xAD, 0x00, 0x5C, 0x9D, - 0x00, 0x0C, 0x9E, 0x00, 0x13, 0xE8, 0xE4, 0x25, - 0xF0, 0x02, 0x86, 0x24, 0x29, 0x7F, 0xC9, 0x13, - 0xD0, 0x04, 0xA5, 0x2F, 0x85, 0x26, 0xAD, 0x02, - 0x5C, 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x29, 0xF0, - 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x08, 0xD0, 0x21, - 0x8E, 0x00, 0x5C, 0x64, 0x29, 0x4C, 0xF7, 0x3B, - 0xA6, 0x28, 0xE4, 0x27, 0xF0, 0x13, 0xA5, 0x26, - 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x08, 0xD0, - 0x08, 0xBD, 0x00, 0x05, 0x8D, 0x00, 0x5C, 0xE6, - 0x28, 0xAD, 0x02, 0x64, 0x89, 0x08, 0xF0, 0x3B, - 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, 0x64, 0xD0, - 0x32, 0xA6, 0x30, 0xA9, 0x01, 0x9D, 0x00, 0x14, - 0xA9, 0x01, 0x9D, 0x00, 0x0D, 0xE8, 0xE4, 0x31, - 0xF0, 0x02, 0x86, 0x30, 0x4C, 0x39, 0x3C, 0xA6, - 0x30, 0xAD, 0x00, 0x64, 0x9D, 0x00, 0x0D, 0x9E, - 0x00, 0x14, 0xE8, 0xE4, 0x31, 0xF0, 0x02, 0x86, - 0x30, 0x29, 0x7F, 0xC9, 0x13, 0xD0, 0x04, 0xA5, - 0x3B, 0x85, 0x32, 0xAD, 0x02, 0x64, 0x29, 0x10, - 0xF0, 0x2C, 0xA6, 0x35, 0xF0, 0x0F, 0xAD, 0x02, - 0x7C, 0x29, 0x10, 0xD0, 0x21, 0x8E, 0x00, 0x64, - 0x64, 0x35, 0x4C, 0x6C, 0x3C, 0xA6, 0x34, 0xE4, - 0x33, 0xF0, 0x13, 0xA5, 0x32, 0xD0, 0x0F, 0xAD, - 0x02, 0x7C, 0x29, 0x10, 0xD0, 0x08, 0xBD, 0x00, - 0x06, 0x8D, 0x00, 0x64, 0xE6, 0x34, 0xAD, 0x02, - 0x6C, 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, - 0x1B, 0xAD, 0x00, 0x6C, 0xD0, 0x32, 0xA6, 0x3C, - 0xA9, 0x01, 0x9D, 0x00, 0x15, 0xA9, 0x01, 0x9D, - 0x00, 0x0E, 0xE8, 0xE4, 0x3D, 0xF0, 0x02, 0x86, - 0x3C, 0x4C, 0xAE, 0x3C, 0xA6, 0x3C, 0xAD, 0x00, - 0x6C, 0x9D, 0x00, 0x0E, 0x9E, 0x00, 0x15, 0xE8, - 0xE4, 0x3D, 0xF0, 0x02, 0x86, 0x3C, 0x29, 0x7F, - 0xC9, 0x13, 0xD0, 0x04, 0xA5, 0x47, 0x85, 0x3E, - 0xAD, 0x02, 0x6C, 0x29, 0x10, 0xF0, 0x2C, 0xA6, - 0x41, 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x20, - 0xD0, 0x21, 0x8E, 0x00, 0x6C, 0x64, 0x41, 0x4C, - 0xE1, 0x3C, 0xA6, 0x40, 0xE4, 0x3F, 0xF0, 0x13, - 0xA5, 0x3E, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, - 0x20, 0xD0, 0x08, 0xBD, 0x00, 0x07, 0x8D, 0x00, - 0x6C, 0xE6, 0x40, 0xAD, 0x02, 0x74, 0x89, 0x08, - 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, - 0x74, 0xD0, 0x32, 0xA6, 0x48, 0xA9, 0x01, 0x9D, - 0x00, 0x16, 0xA9, 0x01, 0x9D, 0x00, 0x0F, 0xE8, - 0xE4, 0x49, 0xF0, 0x02, 0x86, 0x48, 0x4C, 0x23, - 0x3D, 0xA6, 0x48, 0xAD, 0x00, 0x74, 0x9D, 0x00, - 0x0F, 0x9E, 0x00, 0x16, 0xE8, 0xE4, 0x49, 0xF0, - 0x02, 0x86, 0x48, 0x29, 0x7F, 0xC9, 0x13, 0xD0, - 0x04, 0xA5, 0x53, 0x85, 0x4A, 0xAD, 0x02, 0x74, - 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x4D, 0xF0, 0x0F, - 0xAD, 0x02, 0x7C, 0x29, 0x40, 0xD0, 0x21, 0x8E, - 0x00, 0x74, 0x64, 0x4D, 0x4C, 0x56, 0x3D, 0xA6, - 0x4C, 0xE4, 0x4B, 0xF0, 0x13, 0xA5, 0x4A, 0xD0, - 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x40, 0xD0, 0x08, - 0xBD, 0x00, 0x08, 0x8D, 0x00, 0x74, 0xE6, 0x4C, - 0x60, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xD0, 0xD0, 0x00, 0x38, - 0xCE, 0xC0, -}; diff --git a/drivers/char/sx.c b/drivers/char/sx.c deleted file mode 100644 index 1291462bcddb..000000000000 --- a/drivers/char/sx.c +++ /dev/null @@ -1,2894 +0,0 @@ -/* sx.c -- driver for the Specialix SX series cards. - * - * This driver will also support the older SI, and XIO cards. - * - * - * (C) 1998 - 2004 R.E.Wolff@BitWizard.nl - * - * Simon Allen (simonallen@cix.compulink.co.uk) wrote a previous - * version of this driver. Some fragments may have been copied. (none - * yet :-) - * - * Specialix pays for the development and support of this driver. - * Please DO contact support@specialix.co.uk if you require - * support. But please read the documentation (sx.txt) first. - * - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - * Revision history: - * Revision 1.33 2000/03/09 10:00:00 pvdl,wolff - * - Fixed module and port counting - * - Fixed signal handling - * - Fixed an Ooops - * - * Revision 1.32 2000/03/07 09:00:00 wolff,pvdl - * - Fixed some sx_dprintk typos - * - added detection for an invalid board/module configuration - * - * Revision 1.31 2000/03/06 12:00:00 wolff,pvdl - * - Added support for EISA - * - * Revision 1.30 2000/01/21 17:43:06 wolff - * - Added support for SX+ - * - * Revision 1.26 1999/08/05 15:22:14 wolff - * - Port to 2.3.x - * - Reformatted to Linus' liking. - * - * Revision 1.25 1999/07/30 14:24:08 wolff - * Had accidentally left "gs_debug" set to "-1" instead of "off" (=0). - * - * Revision 1.24 1999/07/28 09:41:52 wolff - * - I noticed the remark about use-count straying in sx.txt. I checked - * sx_open, and found a few places where that could happen. I hope it's - * fixed now. - * - * Revision 1.23 1999/07/28 08:56:06 wolff - * - Fixed crash when sx_firmware run twice. - * - Added sx_slowpoll as a module parameter (I guess nobody really wanted - * to change it from the default... ) - * - Fixed a stupid editing problem I introduced in 1.22. - * - Fixed dropping characters on a termios change. - * - * Revision 1.22 1999/07/26 21:01:43 wolff - * Russell Brown noticed that I had overlooked 4 out of six modem control - * signals in sx_getsignals. Ooops. - * - * Revision 1.21 1999/07/23 09:11:33 wolff - * I forgot to free dynamically allocated memory when the driver is unloaded. - * - * Revision 1.20 1999/07/20 06:25:26 wolff - * The "closing wait" wasn't honoured. Thanks to James Griffiths for - * reporting this. - * - * Revision 1.19 1999/07/11 08:59:59 wolff - * Fixed an oops in close, when an open was pending. Changed the memtest - * a bit. Should also test the board in word-mode, however my card fails the - * memtest then. I still have to figure out what is wrong... - * - * Revision 1.18 1999/06/10 09:38:42 wolff - * Changed the format of the firmware revision from %04x to %x.%02x . - * - * Revision 1.17 1999/06/04 09:44:35 wolff - * fixed problem: reference to pci stuff when config_pci was off... - * Thanks to Jorge Novo for noticing this. - * - * Revision 1.16 1999/06/02 08:30:15 wolff - * added/removed the workaround for the DCD bug in the Firmware. - * A bit more debugging code to locate that... - * - * Revision 1.15 1999/06/01 11:35:30 wolff - * when DCD is left low (floating?), on TA's the firmware first tells us - * that DCD is high, but after a short while suddenly comes to the - * conclusion that it is low. All this would be fine, if it weren't that - * Unix requires us to send a "hangup" signal in that case. This usually - * all happens BEFORE the program has had a chance to ioctl the device - * into clocal mode.. - * - * Revision 1.14 1999/05/25 11:18:59 wolff - * Added PCI-fix. - * Added checks for return code of sx_sendcommand. - * Don't issue "reconfig" if port isn't open yet. (bit us on TA modules...) - * - * Revision 1.13 1999/04/29 15:18:01 wolff - * Fixed an "oops" that showed on SuSE 6.0 systems. - * Activate DTR again after stty 0. - * - * Revision 1.12 1999/04/29 07:49:52 wolff - * Improved "stty 0" handling a bit. (used to change baud to 9600 assuming - * the connection would be dropped anyway. That is not always the case, - * and confuses people). - * Told the card to always monitor the modem signals. - * Added support for dynamic gs_debug adjustments. - * Now tells the rest of the system the number of ports. - * - * Revision 1.11 1999/04/24 11:11:30 wolff - * Fixed two stupid typos in the memory test. - * - * Revision 1.10 1999/04/24 10:53:39 wolff - * Added some of Christian's suggestions. - * Fixed an HW_COOK_IN bug (ISIG was not in I_OTHER. We used to trust the - * card to send the signal to the process.....) - * - * Revision 1.9 1999/04/23 07:26:38 wolff - * Included Christian Lademann's 2.0 compile-warning fixes and interrupt - * assignment redesign. - * Cleanup of some other stuff. - * - * Revision 1.8 1999/04/16 13:05:30 wolff - * fixed a DCD change unnoticed bug. - * - * Revision 1.7 1999/04/14 22:19:51 wolff - * Fixed typo that showed up in 2.0.x builds (get_user instead of Get_user!) - * - * Revision 1.6 1999/04/13 18:40:20 wolff - * changed misc-minor to 161, as assigned by HPA. - * - * Revision 1.5 1999/04/13 15:12:25 wolff - * Fixed use-count leak when "hangup" occurred. - * Added workaround for a stupid-PCIBIOS bug. - * - * - * Revision 1.4 1999/04/01 22:47:40 wolff - * Fixed < 1M linux-2.0 problem. - * (vremap isn't compatible with ioremap in that case) - * - * Revision 1.3 1999/03/31 13:45:45 wolff - * Firmware loading is now done through a separate IOCTL. - * - * Revision 1.2 1999/03/28 12:22:29 wolff - * rcs cleanup - * - * Revision 1.1 1999/03/28 12:10:34 wolff - * Readying for release on 2.0.x (sorry David, 1.01 becomes 1.1 for RCS). - * - * Revision 0.12 1999/03/28 09:20:10 wolff - * Fixed problem in 0.11, continueing cleanup. - * - * Revision 0.11 1999/03/28 08:46:44 wolff - * cleanup. Not good. - * - * Revision 0.10 1999/03/28 08:09:43 wolff - * Fixed loosing characters on close. - * - * Revision 0.9 1999/03/21 22:52:01 wolff - * Ported back to 2.2.... (minor things) - * - * Revision 0.8 1999/03/21 22:40:33 wolff - * Port to 2.0 - * - * Revision 0.7 1999/03/21 19:06:34 wolff - * Fixed hangup processing. - * - * Revision 0.6 1999/02/05 08:45:14 wolff - * fixed real_raw problems. Inclusion into kernel imminent. - * - * Revision 0.5 1998/12/21 23:51:06 wolff - * Snatched a nasty bug: sx_transmit_chars was getting re-entered, and it - * shouldn't have. THATs why I want to have transmit interrupts even when - * the buffer is empty. - * - * Revision 0.4 1998/12/17 09:34:46 wolff - * PPP works. ioctl works. Basically works! - * - * Revision 0.3 1998/12/15 13:05:18 wolff - * It works! Wow! Gotta start implementing IOCTL and stuff.... - * - * Revision 0.2 1998/12/01 08:33:53 wolff - * moved over to 2.1.130 - * - * Revision 0.1 1998/11/03 21:23:51 wolff - * Initial revision. Detects SX card. - * - * */ - -#define SX_VERSION 1.33 - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* The 3.0.0 version of sxboards/sxwindow.h uses BYTE and WORD.... */ -#define BYTE u8 -#define WORD u16 - -/* .... but the 3.0.4 version uses _u8 and _u16. */ -#define _u8 u8 -#define _u16 u16 - -#include "sxboards.h" -#include "sxwindow.h" - -#include -#include "sx.h" - -/* I don't think that this driver can handle more than 256 ports on - one machine. You'll have to increase the number of boards in sx.h - if you want more than 4 boards. */ - -#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 -#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000 -#endif - -/* Configurable options: - (Don't be too sure that it'll work if you toggle them) */ - -/* Am I paranoid or not ? ;-) */ -#undef SX_PARANOIA_CHECK - -/* 20 -> 2000 per second. The card should rate-limit interrupts at 100 - Hz, but it is user configurable. I don't recommend going above 1000 - Hz. The interrupt ratelimit might trigger if the interrupt is - shared with a very active other device. */ -#define IRQ_RATE_LIMIT 20 - -/* Sharing interrupts is possible now. If the other device wants more - than 2000 interrupts per second, we'd gracefully decline further - interrupts. That's not what we want. On the other hand, if the - other device interrupts 2000 times a second, don't use the SX - interrupt. Use polling. */ -#undef IRQ_RATE_LIMIT - -#if 0 -/* Not implemented */ -/* - * The following defines are mostly for testing purposes. But if you need - * some nice reporting in your syslog, you can define them also. - */ -#define SX_REPORT_FIFO -#define SX_REPORT_OVERRUN -#endif - -/* Function prototypes */ -static void sx_disable_tx_interrupts(void *ptr); -static void sx_enable_tx_interrupts(void *ptr); -static void sx_disable_rx_interrupts(void *ptr); -static void sx_enable_rx_interrupts(void *ptr); -static int sx_carrier_raised(struct tty_port *port); -static void sx_shutdown_port(void *ptr); -static int sx_set_real_termios(void *ptr); -static void sx_close(void *ptr); -static int sx_chars_in_buffer(void *ptr); -static int sx_init_board(struct sx_board *board); -static int sx_init_portstructs(int nboards, int nports); -static long sx_fw_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg); -static int sx_init_drivers(void); - -static struct tty_driver *sx_driver; - -static DEFINE_MUTEX(sx_boards_lock); -static struct sx_board boards[SX_NBOARDS]; -static struct sx_port *sx_ports; -static int sx_initialized; -static int sx_nports; -static int sx_debug; - -/* You can have the driver poll your card. - - Set sx_poll to 1 to poll every timer tick (10ms on Intel). - This is used when the card cannot use an interrupt for some reason. - - - set sx_slowpoll to 100 to do an extra poll once a second (on Intel). If - the driver misses an interrupt (report this if it DOES happen to you!) - everything will continue to work.... - */ -static int sx_poll = 1; -static int sx_slowpoll; - -/* The card limits the number of interrupts per second. - At 115k2 "100" should be sufficient. - If you're using higher baudrates, you can increase this... - */ - -static int sx_maxints = 100; - -#ifdef CONFIG_ISA - -/* These are the only open spaces in my computer. Yours may have more - or less.... -- REW - duh: Card at 0xa0000 is possible on HP Netserver?? -- pvdl -*/ -static int sx_probe_addrs[] = { - 0xc0000, 0xd0000, 0xe0000, - 0xc8000, 0xd8000, 0xe8000 -}; -static int si_probe_addrs[] = { - 0xc0000, 0xd0000, 0xe0000, - 0xc8000, 0xd8000, 0xe8000, 0xa0000 -}; -static int si1_probe_addrs[] = { - 0xd0000 -}; - -#define NR_SX_ADDRS ARRAY_SIZE(sx_probe_addrs) -#define NR_SI_ADDRS ARRAY_SIZE(si_probe_addrs) -#define NR_SI1_ADDRS ARRAY_SIZE(si1_probe_addrs) - -module_param_array(sx_probe_addrs, int, NULL, 0); -module_param_array(si_probe_addrs, int, NULL, 0); -#endif - -/* Set the mask to all-ones. This alas, only supports 32 interrupts. - Some architectures may need more. */ -static int sx_irqmask = -1; - -module_param(sx_poll, int, 0); -module_param(sx_slowpoll, int, 0); -module_param(sx_maxints, int, 0); -module_param(sx_debug, int, 0); -module_param(sx_irqmask, int, 0); - -MODULE_LICENSE("GPL"); - -static struct real_driver sx_real_driver = { - sx_disable_tx_interrupts, - sx_enable_tx_interrupts, - sx_disable_rx_interrupts, - sx_enable_rx_interrupts, - sx_shutdown_port, - sx_set_real_termios, - sx_chars_in_buffer, - sx_close, -}; - -/* - This driver can spew a whole lot of debugging output at you. If you - need maximum performance, you should disable the DEBUG define. To - aid in debugging in the field, I'm leaving the compile-time debug - features enabled, and disable them "runtime". That allows me to - instruct people with problems to enable debugging without requiring - them to recompile... -*/ -#define DEBUG - -#ifdef DEBUG -#define sx_dprintk(f, str...) if (sx_debug & f) printk (str) -#else -#define sx_dprintk(f, str...) /* nothing */ -#endif - -#define func_enter() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s\n",__func__) -#define func_exit() sx_dprintk(SX_DEBUG_FLOW, "sx: exit %s\n",__func__) - -#define func_enter2() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \ - __func__, port->line) - -/* - * Firmware loader driver specific routines - * - */ - -static const struct file_operations sx_fw_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = sx_fw_ioctl, - .llseek = noop_llseek, -}; - -static struct miscdevice sx_fw_device = { - SXCTL_MISC_MINOR, "sxctl", &sx_fw_fops -}; - -#ifdef SX_PARANOIA_CHECK - -/* This doesn't work. Who's paranoid around here? Not me! */ - -static inline int sx_paranoia_check(struct sx_port const *port, - char *name, const char *routine) -{ - static const char *badmagic = KERN_ERR "sx: Warning: bad sx port magic " - "number for device %s in %s\n"; - static const char *badinfo = KERN_ERR "sx: Warning: null sx port for " - "device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != SX_MAGIC) { - printk(badmagic, name, routine); - return 1; - } - - return 0; -} -#else -#define sx_paranoia_check(a,b,c) 0 -#endif - -/* The timeouts. First try 30 times as fast as possible. Then give - the card some time to breathe between accesses. (Otherwise the - processor on the card might not be able to access its OWN bus... */ - -#define TIMEOUT_1 30 -#define TIMEOUT_2 1000000 - -#ifdef DEBUG -static void my_hd_io(void __iomem *p, int len) -{ - int i, j, ch; - unsigned char __iomem *addr = p; - - for (i = 0; i < len; i += 16) { - printk("%p ", addr + i); - for (j = 0; j < 16; j++) { - printk("%02x %s", readb(addr + j + i), - (j == 7) ? " " : ""); - } - for (j = 0; j < 16; j++) { - ch = readb(addr + j + i); - printk("%c", (ch < 0x20) ? '.' : - ((ch > 0x7f) ? '.' : ch)); - } - printk("\n"); - } -} -static void my_hd(void *p, int len) -{ - int i, j, ch; - unsigned char *addr = p; - - for (i = 0; i < len; i += 16) { - printk("%p ", addr + i); - for (j = 0; j < 16; j++) { - printk("%02x %s", addr[j + i], (j == 7) ? " " : ""); - } - for (j = 0; j < 16; j++) { - ch = addr[j + i]; - printk("%c", (ch < 0x20) ? '.' : - ((ch > 0x7f) ? '.' : ch)); - } - printk("\n"); - } -} -#endif - -/* This needs redoing for Alpha -- REW -- Done. */ - -static inline void write_sx_byte(struct sx_board *board, int offset, u8 byte) -{ - writeb(byte, board->base + offset); -} - -static inline u8 read_sx_byte(struct sx_board *board, int offset) -{ - return readb(board->base + offset); -} - -static inline void write_sx_word(struct sx_board *board, int offset, u16 word) -{ - writew(word, board->base + offset); -} - -static inline u16 read_sx_word(struct sx_board *board, int offset) -{ - return readw(board->base + offset); -} - -static int sx_busy_wait_eq(struct sx_board *board, - int offset, int mask, int correctval) -{ - int i; - - func_enter(); - - for (i = 0; i < TIMEOUT_1; i++) - if ((read_sx_byte(board, offset) & mask) == correctval) { - func_exit(); - return 1; - } - - for (i = 0; i < TIMEOUT_2; i++) { - if ((read_sx_byte(board, offset) & mask) == correctval) { - func_exit(); - return 1; - } - udelay(1); - } - - func_exit(); - return 0; -} - -static int sx_busy_wait_neq(struct sx_board *board, - int offset, int mask, int badval) -{ - int i; - - func_enter(); - - for (i = 0; i < TIMEOUT_1; i++) - if ((read_sx_byte(board, offset) & mask) != badval) { - func_exit(); - return 1; - } - - for (i = 0; i < TIMEOUT_2; i++) { - if ((read_sx_byte(board, offset) & mask) != badval) { - func_exit(); - return 1; - } - udelay(1); - } - - func_exit(); - return 0; -} - -/* 5.6.4 of 6210028 r2.3 */ -static int sx_reset(struct sx_board *board) -{ - func_enter(); - - if (IS_SX_BOARD(board)) { - - write_sx_byte(board, SX_CONFIG, 0); - write_sx_byte(board, SX_RESET, 1); /* Value doesn't matter */ - - if (!sx_busy_wait_eq(board, SX_RESET_STATUS, 1, 0)) { - printk(KERN_INFO "sx: Card doesn't respond to " - "reset...\n"); - return 0; - } - } else if (IS_EISA_BOARD(board)) { - outb(board->irq << 4, board->eisa_base + 0xc02); - } else if (IS_SI1_BOARD(board)) { - write_sx_byte(board, SI1_ISA_RESET, 0); /*value doesn't matter*/ - } else { - /* Gory details of the SI/ISA board */ - write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_SET); - write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_CLEAR); - write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_CLEAR); - write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_CLEAR); - write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR); - write_sx_byte(board, SI2_ISA_IRQSET, SI2_ISA_IRQSET_CLEAR); - } - - func_exit(); - return 1; -} - -/* This doesn't work on machines where "NULL" isn't 0 */ -/* If you have one of those, someone will need to write - the equivalent of this, which will amount to about 3 lines. I don't - want to complicate this right now. -- REW - (See, I do write comments every now and then :-) */ -#define OFFSETOF(strct, elem) ((long)&(((struct strct *)NULL)->elem)) - -#define CHAN_OFFSET(port,elem) (port->ch_base + OFFSETOF (_SXCHANNEL, elem)) -#define MODU_OFFSET(board,addr,elem) (addr + OFFSETOF (_SXMODULE, elem)) -#define BRD_OFFSET(board,elem) (OFFSETOF (_SXCARD, elem)) - -#define sx_write_channel_byte(port, elem, val) \ - write_sx_byte (port->board, CHAN_OFFSET (port, elem), val) - -#define sx_read_channel_byte(port, elem) \ - read_sx_byte (port->board, CHAN_OFFSET (port, elem)) - -#define sx_write_channel_word(port, elem, val) \ - write_sx_word (port->board, CHAN_OFFSET (port, elem), val) - -#define sx_read_channel_word(port, elem) \ - read_sx_word (port->board, CHAN_OFFSET (port, elem)) - -#define sx_write_module_byte(board, addr, elem, val) \ - write_sx_byte (board, MODU_OFFSET (board, addr, elem), val) - -#define sx_read_module_byte(board, addr, elem) \ - read_sx_byte (board, MODU_OFFSET (board, addr, elem)) - -#define sx_write_module_word(board, addr, elem, val) \ - write_sx_word (board, MODU_OFFSET (board, addr, elem), val) - -#define sx_read_module_word(board, addr, elem) \ - read_sx_word (board, MODU_OFFSET (board, addr, elem)) - -#define sx_write_board_byte(board, elem, val) \ - write_sx_byte (board, BRD_OFFSET (board, elem), val) - -#define sx_read_board_byte(board, elem) \ - read_sx_byte (board, BRD_OFFSET (board, elem)) - -#define sx_write_board_word(board, elem, val) \ - write_sx_word (board, BRD_OFFSET (board, elem), val) - -#define sx_read_board_word(board, elem) \ - read_sx_word (board, BRD_OFFSET (board, elem)) - -static int sx_start_board(struct sx_board *board) -{ - if (IS_SX_BOARD(board)) { - write_sx_byte(board, SX_CONFIG, SX_CONF_BUSEN); - } else if (IS_EISA_BOARD(board)) { - write_sx_byte(board, SI2_EISA_OFF, SI2_EISA_VAL); - outb((board->irq << 4) | 4, board->eisa_base + 0xc02); - } else if (IS_SI1_BOARD(board)) { - write_sx_byte(board, SI1_ISA_RESET_CLEAR, 0); - write_sx_byte(board, SI1_ISA_INTCL, 0); - } else { - /* Don't bug me about the clear_set. - I haven't the foggiest idea what it's about -- REW */ - write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_CLEAR); - write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET); - } - return 1; -} - -#define SX_IRQ_REG_VAL(board) \ - ((board->flags & SX_ISA_BOARD) ? (board->irq << 4) : 0) - -/* Note. The SX register is write-only. Therefore, we have to enable the - bus too. This is a no-op, if you don't mess with this driver... */ -static int sx_start_interrupts(struct sx_board *board) -{ - - /* Don't call this with board->irq == 0 */ - - if (IS_SX_BOARD(board)) { - write_sx_byte(board, SX_CONFIG, SX_IRQ_REG_VAL(board) | - SX_CONF_BUSEN | SX_CONF_HOSTIRQ); - } else if (IS_EISA_BOARD(board)) { - inb(board->eisa_base + 0xc03); - } else if (IS_SI1_BOARD(board)) { - write_sx_byte(board, SI1_ISA_INTCL, 0); - write_sx_byte(board, SI1_ISA_INTCL_CLEAR, 0); - } else { - switch (board->irq) { - case 11: - write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_SET); - break; - case 12: - write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_SET); - break; - case 15: - write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_SET); - break; - default: - printk(KERN_INFO "sx: SI/XIO card doesn't support " - "interrupt %d.\n", board->irq); - return 0; - } - write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET); - } - - return 1; -} - -static int sx_send_command(struct sx_port *port, - int command, int mask, int newstat) -{ - func_enter2(); - write_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat), command); - func_exit(); - return sx_busy_wait_eq(port->board, CHAN_OFFSET(port, hi_hstat), mask, - newstat); -} - -static char *mod_type_s(int module_type) -{ - switch (module_type) { - case TA4: - return "TA4"; - case TA8: - return "TA8"; - case TA4_ASIC: - return "TA4_ASIC"; - case TA8_ASIC: - return "TA8_ASIC"; - case MTA_CD1400: - return "MTA_CD1400"; - case SXDC: - return "SXDC"; - default: - return "Unknown/invalid"; - } -} - -static char *pan_type_s(int pan_type) -{ - switch (pan_type) { - case MOD_RS232DB25: - return "MOD_RS232DB25"; - case MOD_RS232RJ45: - return "MOD_RS232RJ45"; - case MOD_RS422DB25: - return "MOD_RS422DB25"; - case MOD_PARALLEL: - return "MOD_PARALLEL"; - case MOD_2_RS232DB25: - return "MOD_2_RS232DB25"; - case MOD_2_RS232RJ45: - return "MOD_2_RS232RJ45"; - case MOD_2_RS422DB25: - return "MOD_2_RS422DB25"; - case MOD_RS232DB25MALE: - return "MOD_RS232DB25MALE"; - case MOD_2_PARALLEL: - return "MOD_2_PARALLEL"; - case MOD_BLANK: - return "empty"; - default: - return "invalid"; - } -} - -static int mod_compat_type(int module_type) -{ - return module_type >> 4; -} - -static void sx_reconfigure_port(struct sx_port *port) -{ - if (sx_read_channel_byte(port, hi_hstat) == HS_IDLE_OPEN) { - if (sx_send_command(port, HS_CONFIG, -1, HS_IDLE_OPEN) != 1) { - printk(KERN_WARNING "sx: Sent reconfigure command, but " - "card didn't react.\n"); - } - } else { - sx_dprintk(SX_DEBUG_TERMIOS, "sx: Not sending reconfigure: " - "port isn't open (%02x).\n", - sx_read_channel_byte(port, hi_hstat)); - } -} - -static void sx_setsignals(struct sx_port *port, int dtr, int rts) -{ - int t; - func_enter2(); - - t = sx_read_channel_byte(port, hi_op); - if (dtr >= 0) - t = dtr ? (t | OP_DTR) : (t & ~OP_DTR); - if (rts >= 0) - t = rts ? (t | OP_RTS) : (t & ~OP_RTS); - sx_write_channel_byte(port, hi_op, t); - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "setsignals: %d/%d\n", dtr, rts); - - func_exit(); -} - -static int sx_getsignals(struct sx_port *port) -{ - int i_stat, o_stat; - - o_stat = sx_read_channel_byte(port, hi_op); - i_stat = sx_read_channel_byte(port, hi_ip); - - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) " - "%02x/%02x\n", - (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0, - port->c_dcd, tty_port_carrier_raised(&port->gs.port), - sx_read_channel_byte(port, hi_ip), - sx_read_channel_byte(port, hi_state)); - - return (((o_stat & OP_DTR) ? TIOCM_DTR : 0) | - ((o_stat & OP_RTS) ? TIOCM_RTS : 0) | - ((i_stat & IP_CTS) ? TIOCM_CTS : 0) | - ((i_stat & IP_DCD) ? TIOCM_CAR : 0) | - ((i_stat & IP_DSR) ? TIOCM_DSR : 0) | - ((i_stat & IP_RI) ? TIOCM_RNG : 0)); -} - -static void sx_set_baud(struct sx_port *port) -{ - int t; - - if (port->board->ta_type == MOD_SXDC) { - switch (port->gs.baud) { - /* Save some typing work... */ -#define e(x) case x: t = BAUD_ ## x; break - e(50); - e(75); - e(110); - e(150); - e(200); - e(300); - e(600); - e(1200); - e(1800); - e(2000); - e(2400); - e(4800); - e(7200); - e(9600); - e(14400); - e(19200); - e(28800); - e(38400); - e(56000); - e(57600); - e(64000); - e(76800); - e(115200); - e(128000); - e(150000); - e(230400); - e(256000); - e(460800); - e(921600); - case 134: - t = BAUD_134_5; - break; - case 0: - t = -1; - break; - default: - /* Can I return "invalid"? */ - t = BAUD_9600; - printk(KERN_INFO "sx: unsupported baud rate: %d.\n", - port->gs.baud); - break; - } -#undef e - if (t > 0) { -/* The baud rate is not set to 0, so we're enabeling DTR... -- REW */ - sx_setsignals(port, 1, -1); - /* XXX This is not TA & MTA compatible */ - sx_write_channel_byte(port, hi_csr, 0xff); - - sx_write_channel_byte(port, hi_txbaud, t); - sx_write_channel_byte(port, hi_rxbaud, t); - } else { - sx_setsignals(port, 0, -1); - } - } else { - switch (port->gs.baud) { -#define e(x) case x: t = CSR_ ## x; break - e(75); - e(150); - e(300); - e(600); - e(1200); - e(2400); - e(4800); - e(1800); - e(9600); - e(19200); - e(57600); - e(38400); -/* TA supports 110, but not 115200, MTA supports 115200, but not 110 */ - case 110: - if (port->board->ta_type == MOD_TA) { - t = CSR_110; - break; - } else { - t = CSR_9600; - printk(KERN_INFO "sx: Unsupported baud rate: " - "%d.\n", port->gs.baud); - break; - } - case 115200: - if (port->board->ta_type == MOD_TA) { - t = CSR_9600; - printk(KERN_INFO "sx: Unsupported baud rate: " - "%d.\n", port->gs.baud); - break; - } else { - t = CSR_110; - break; - } - case 0: - t = -1; - break; - default: - t = CSR_9600; - printk(KERN_INFO "sx: Unsupported baud rate: %d.\n", - port->gs.baud); - break; - } -#undef e - if (t >= 0) { - sx_setsignals(port, 1, -1); - sx_write_channel_byte(port, hi_csr, t * 0x11); - } else { - sx_setsignals(port, 0, -1); - } - } -} - -/* Simon Allen's version of this routine was 225 lines long. 85 is a lot - better. -- REW */ - -static int sx_set_real_termios(void *ptr) -{ - struct sx_port *port = ptr; - - func_enter2(); - - if (!port->gs.port.tty) - return 0; - - /* What is this doing here? -- REW - Ha! figured it out. It is to allow you to get DTR active again - if you've dropped it with stty 0. Moved to set_baud, where it - belongs (next to the drop dtr if baud == 0) -- REW */ - /* sx_setsignals (port, 1, -1); */ - - sx_set_baud(port); - -#define CFLAG port->gs.port.tty->termios->c_cflag - sx_write_channel_byte(port, hi_mr1, - (C_PARENB(port->gs.port.tty) ? MR1_WITH : MR1_NONE) | - (C_PARODD(port->gs.port.tty) ? MR1_ODD : MR1_EVEN) | - (C_CRTSCTS(port->gs.port.tty) ? MR1_RTS_RXFLOW : 0) | - (((CFLAG & CSIZE) == CS8) ? MR1_8_BITS : 0) | - (((CFLAG & CSIZE) == CS7) ? MR1_7_BITS : 0) | - (((CFLAG & CSIZE) == CS6) ? MR1_6_BITS : 0) | - (((CFLAG & CSIZE) == CS5) ? MR1_5_BITS : 0)); - - sx_write_channel_byte(port, hi_mr2, - (C_CRTSCTS(port->gs.port.tty) ? MR2_CTS_TXFLOW : 0) | - (C_CSTOPB(port->gs.port.tty) ? MR2_2_STOP : - MR2_1_STOP)); - - switch (CFLAG & CSIZE) { - case CS8: - sx_write_channel_byte(port, hi_mask, 0xff); - break; - case CS7: - sx_write_channel_byte(port, hi_mask, 0x7f); - break; - case CS6: - sx_write_channel_byte(port, hi_mask, 0x3f); - break; - case CS5: - sx_write_channel_byte(port, hi_mask, 0x1f); - break; - default: - printk(KERN_INFO "sx: Invalid wordsize: %u\n", - (unsigned int)CFLAG & CSIZE); - break; - } - - sx_write_channel_byte(port, hi_prtcl, - (I_IXON(port->gs.port.tty) ? SP_TXEN : 0) | - (I_IXOFF(port->gs.port.tty) ? SP_RXEN : 0) | - (I_IXANY(port->gs.port.tty) ? SP_TANY : 0) | SP_DCEN); - - sx_write_channel_byte(port, hi_break, - (I_IGNBRK(port->gs.port.tty) ? BR_IGN : 0 | - I_BRKINT(port->gs.port.tty) ? BR_INT : 0)); - - sx_write_channel_byte(port, hi_txon, START_CHAR(port->gs.port.tty)); - sx_write_channel_byte(port, hi_rxon, START_CHAR(port->gs.port.tty)); - sx_write_channel_byte(port, hi_txoff, STOP_CHAR(port->gs.port.tty)); - sx_write_channel_byte(port, hi_rxoff, STOP_CHAR(port->gs.port.tty)); - - sx_reconfigure_port(port); - - /* Tell line discipline whether we will do input cooking */ - if (I_OTHER(port->gs.port.tty)) { - clear_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags); - } else { - set_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags); - } - sx_dprintk(SX_DEBUG_TERMIOS, "iflags: %x(%d) ", - (unsigned int)port->gs.port.tty->termios->c_iflag, - I_OTHER(port->gs.port.tty)); - -/* Tell line discipline whether we will do output cooking. - * If OPOST is set and no other output flags are set then we can do output - * processing. Even if only *one* other flag in the O_OTHER group is set - * we do cooking in software. - */ - if (O_OPOST(port->gs.port.tty) && !O_OTHER(port->gs.port.tty)) { - set_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags); - } else { - clear_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags); - } - sx_dprintk(SX_DEBUG_TERMIOS, "oflags: %x(%d)\n", - (unsigned int)port->gs.port.tty->termios->c_oflag, - O_OTHER(port->gs.port.tty)); - /* port->c_dcd = sx_get_CD (port); */ - func_exit(); - return 0; -} - -/* ********************************************************************** * - * the interrupt related routines * - * ********************************************************************** */ - -/* Note: - Other drivers use the macro "MIN" to calculate how much to copy. - This has the disadvantage that it will evaluate parts twice. That's - expensive when it's IO (and the compiler cannot optimize those away!). - Moreover, I'm not sure that you're race-free. - - I assign a value, and then only allow the value to decrease. This - is always safe. This makes the code a few lines longer, and you - know I'm dead against that, but I think it is required in this - case. */ - -static void sx_transmit_chars(struct sx_port *port) -{ - int c; - int tx_ip; - int txroom; - - func_enter2(); - sx_dprintk(SX_DEBUG_TRANSMIT, "Port %p: transmit %d chars\n", - port, port->gs.xmit_cnt); - - if (test_and_set_bit(SX_PORT_TRANSMIT_LOCK, &port->locks)) { - return; - } - - while (1) { - c = port->gs.xmit_cnt; - - sx_dprintk(SX_DEBUG_TRANSMIT, "Copying %d ", c); - tx_ip = sx_read_channel_byte(port, hi_txipos); - - /* Took me 5 minutes to deduce this formula. - Luckily it is literally in the manual in section 6.5.4.3.5 */ - txroom = (sx_read_channel_byte(port, hi_txopos) - tx_ip - 1) & - 0xff; - - /* Don't copy more bytes than there is room for in the buffer */ - if (c > txroom) - c = txroom; - sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, txroom); - - /* Don't copy past the end of the hardware transmit buffer */ - if (c > 0x100 - tx_ip) - c = 0x100 - tx_ip; - - sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, 0x100 - tx_ip); - - /* Don't copy pas the end of the source buffer */ - if (c > SERIAL_XMIT_SIZE - port->gs.xmit_tail) - c = SERIAL_XMIT_SIZE - port->gs.xmit_tail; - - sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%ld) \n", - c, SERIAL_XMIT_SIZE - port->gs.xmit_tail); - - /* If for one reason or another, we can't copy more data, we're - done! */ - if (c == 0) - break; - - memcpy_toio(port->board->base + CHAN_OFFSET(port, hi_txbuf) + - tx_ip, port->gs.xmit_buf + port->gs.xmit_tail, c); - - /* Update the pointer in the card */ - sx_write_channel_byte(port, hi_txipos, (tx_ip + c) & 0xff); - - /* Update the kernel buffer end */ - port->gs.xmit_tail = (port->gs.xmit_tail + c) & - (SERIAL_XMIT_SIZE - 1); - - /* This one last. (this is essential) - It would allow others to start putting more data into the - buffer! */ - port->gs.xmit_cnt -= c; - } - - if (port->gs.xmit_cnt == 0) { - sx_disable_tx_interrupts(port); - } - - if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { - tty_wakeup(port->gs.port.tty); - sx_dprintk(SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n", - port->gs.wakeup_chars); - } - - clear_bit(SX_PORT_TRANSMIT_LOCK, &port->locks); - func_exit(); -} - -/* Note the symmetry between receiving chars and transmitting them! - Note: The kernel should have implemented both a receive buffer and - a transmit buffer. */ - -/* Inlined: Called only once. Remove the inline when you add another call */ -static inline void sx_receive_chars(struct sx_port *port) -{ - int c; - int rx_op; - struct tty_struct *tty; - int copied = 0; - unsigned char *rp; - - func_enter2(); - tty = port->gs.port.tty; - while (1) { - rx_op = sx_read_channel_byte(port, hi_rxopos); - c = (sx_read_channel_byte(port, hi_rxipos) - rx_op) & 0xff; - - sx_dprintk(SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c); - - /* Don't copy past the end of the hardware receive buffer */ - if (rx_op + c > 0x100) - c = 0x100 - rx_op; - - sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c); - - /* Don't copy more bytes than there is room for in the buffer */ - - c = tty_prepare_flip_string(tty, &rp, c); - - sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c); - - /* If for one reason or another, we can't copy more data, we're done! */ - if (c == 0) - break; - - sx_dprintk(SX_DEBUG_RECEIVE, "Copying over %d chars. First is " - "%d at %lx\n", c, read_sx_byte(port->board, - CHAN_OFFSET(port, hi_rxbuf) + rx_op), - CHAN_OFFSET(port, hi_rxbuf)); - memcpy_fromio(rp, port->board->base + - CHAN_OFFSET(port, hi_rxbuf) + rx_op, c); - - /* This one last. ( Not essential.) - It allows the card to start putting more data into the - buffer! - Update the pointer in the card */ - sx_write_channel_byte(port, hi_rxopos, (rx_op + c) & 0xff); - - copied += c; - } - if (copied) { - struct timeval tv; - - do_gettimeofday(&tv); - sx_dprintk(SX_DEBUG_RECEIVE, "pushing flipq port %d (%3d " - "chars): %d.%06d (%d/%d)\n", port->line, - copied, (int)(tv.tv_sec % 60), (int)tv.tv_usec, - tty->raw, tty->real_raw); - - /* Tell the rest of the system the news. Great news. New - characters! */ - tty_flip_buffer_push(tty); - /* tty_schedule_flip (tty); */ - } - - func_exit(); -} - -/* Inlined: it is called only once. Remove the inline if you add another - call */ -static inline void sx_check_modem_signals(struct sx_port *port) -{ - int hi_state; - int c_dcd; - - hi_state = sx_read_channel_byte(port, hi_state); - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n", - port->c_dcd, tty_port_carrier_raised(&port->gs.port)); - - if (hi_state & ST_BREAK) { - hi_state &= ~ST_BREAK; - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a break.\n"); - sx_write_channel_byte(port, hi_state, hi_state); - gs_got_break(&port->gs); - } - if (hi_state & ST_DCD) { - hi_state &= ~ST_DCD; - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n"); - sx_write_channel_byte(port, hi_state, hi_state); - c_dcd = tty_port_carrier_raised(&port->gs.port); - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd); - if (c_dcd != port->c_dcd) { - port->c_dcd = c_dcd; - if (tty_port_carrier_raised(&port->gs.port)) { - /* DCD went UP */ - if ((sx_read_channel_byte(port, hi_hstat) != - HS_IDLE_CLOSED) && - !(port->gs.port.tty->termios-> - c_cflag & CLOCAL)) { - /* Are we blocking in open? */ - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " - "active, unblocking open\n"); - wake_up_interruptible(&port->gs.port. - open_wait); - } else { - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " - "raised. Ignoring.\n"); - } - } else { - /* DCD went down! */ - if (!(port->gs.port.tty->termios->c_cflag & CLOCAL)){ - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " - "dropped. hanging up....\n"); - tty_hangup(port->gs.port.tty); - } else { - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " - "dropped. ignoring.\n"); - } - } - } else { - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Hmmm. card told us " - "DCD changed, but it didn't.\n"); - } - } -} - -/* This is what an interrupt routine should look like. - * Small, elegant, clear. - */ - -static irqreturn_t sx_interrupt(int irq, void *ptr) -{ - struct sx_board *board = ptr; - struct sx_port *port; - int i; - - func_enter(); - sx_dprintk(SX_DEBUG_FLOW, "sx: enter sx_interrupt (%d/%d)\n", irq, - board->irq); - - /* AAargh! The order in which to do these things is essential and - not trivial. - - - Rate limit goes before "recursive". Otherwise a series of - recursive calls will hang the machine in the interrupt routine. - - - hardware twiddling goes before "recursive". Otherwise when we - poll the card, and a recursive interrupt happens, we won't - ack the card, so it might keep on interrupting us. (especially - level sensitive interrupt systems like PCI). - - - Rate limit goes before hardware twiddling. Otherwise we won't - catch a card that has gone bonkers. - - - The "initialized" test goes after the hardware twiddling. Otherwise - the card will stick us in the interrupt routine again. - - - The initialized test goes before recursive. - */ - -#ifdef IRQ_RATE_LIMIT - /* Aaargh! I'm ashamed. This costs more lines-of-code than the - actual interrupt routine!. (Well, used to when I wrote that - comment) */ - { - static int lastjif; - static int nintr = 0; - - if (lastjif == jiffies) { - if (++nintr > IRQ_RATE_LIMIT) { - free_irq(board->irq, board); - printk(KERN_ERR "sx: Too many interrupts. " - "Turning off interrupt %d.\n", - board->irq); - } - } else { - lastjif = jiffies; - nintr = 0; - } - } -#endif - - if (board->irq == irq) { - /* Tell the card we've noticed the interrupt. */ - - sx_write_board_word(board, cc_int_pending, 0); - if (IS_SX_BOARD(board)) { - write_sx_byte(board, SX_RESET_IRQ, 1); - } else if (IS_EISA_BOARD(board)) { - inb(board->eisa_base + 0xc03); - write_sx_word(board, 8, 0); - } else { - write_sx_byte(board, SI2_ISA_INTCLEAR, - SI2_ISA_INTCLEAR_CLEAR); - write_sx_byte(board, SI2_ISA_INTCLEAR, - SI2_ISA_INTCLEAR_SET); - } - } - - if (!sx_initialized) - return IRQ_HANDLED; - if (!(board->flags & SX_BOARD_INITIALIZED)) - return IRQ_HANDLED; - - if (test_and_set_bit(SX_BOARD_INTR_LOCK, &board->locks)) { - printk(KERN_ERR "Recursive interrupt! (%d)\n", board->irq); - return IRQ_HANDLED; - } - - for (i = 0; i < board->nports; i++) { - port = &board->ports[i]; - if (port->gs.port.flags & GS_ACTIVE) { - if (sx_read_channel_byte(port, hi_state)) { - sx_dprintk(SX_DEBUG_INTERRUPTS, "Port %d: " - "modem signal change?... \n",i); - sx_check_modem_signals(port); - } - if (port->gs.xmit_cnt) { - sx_transmit_chars(port); - } - if (!(port->gs.port.flags & SX_RX_THROTTLE)) { - sx_receive_chars(port); - } - } - } - - clear_bit(SX_BOARD_INTR_LOCK, &board->locks); - - sx_dprintk(SX_DEBUG_FLOW, "sx: exit sx_interrupt (%d/%d)\n", irq, - board->irq); - func_exit(); - return IRQ_HANDLED; -} - -static void sx_pollfunc(unsigned long data) -{ - struct sx_board *board = (struct sx_board *)data; - - func_enter(); - - sx_interrupt(0, board); - - mod_timer(&board->timer, jiffies + sx_poll); - func_exit(); -} - -/* ********************************************************************** * - * Here are the routines that actually * - * interface with the generic_serial driver * - * ********************************************************************** */ - -/* Ehhm. I don't know how to fiddle with interrupts on the SX card. --REW */ -/* Hmm. Ok I figured it out. You don't. */ - -static void sx_disable_tx_interrupts(void *ptr) -{ - struct sx_port *port = ptr; - func_enter2(); - - port->gs.port.flags &= ~GS_TX_INTEN; - - func_exit(); -} - -static void sx_enable_tx_interrupts(void *ptr) -{ - struct sx_port *port = ptr; - int data_in_buffer; - func_enter2(); - - /* First transmit the characters that we're supposed to */ - sx_transmit_chars(port); - - /* The sx card will never interrupt us if we don't fill the buffer - past 25%. So we keep considering interrupts off if that's the case. */ - data_in_buffer = (sx_read_channel_byte(port, hi_txipos) - - sx_read_channel_byte(port, hi_txopos)) & 0xff; - - /* XXX Must be "HIGH_WATER" for SI card according to doc. */ - if (data_in_buffer < LOW_WATER) - port->gs.port.flags &= ~GS_TX_INTEN; - - func_exit(); -} - -static void sx_disable_rx_interrupts(void *ptr) -{ - /* struct sx_port *port = ptr; */ - func_enter(); - - func_exit(); -} - -static void sx_enable_rx_interrupts(void *ptr) -{ - /* struct sx_port *port = ptr; */ - func_enter(); - - func_exit(); -} - -/* Jeez. Isn't this simple? */ -static int sx_carrier_raised(struct tty_port *port) -{ - struct sx_port *sp = container_of(port, struct sx_port, gs.port); - return ((sx_read_channel_byte(sp, hi_ip) & IP_DCD) != 0); -} - -/* Jeez. Isn't this simple? */ -static int sx_chars_in_buffer(void *ptr) -{ - struct sx_port *port = ptr; - func_enter2(); - - func_exit(); - return ((sx_read_channel_byte(port, hi_txipos) - - sx_read_channel_byte(port, hi_txopos)) & 0xff); -} - -static void sx_shutdown_port(void *ptr) -{ - struct sx_port *port = ptr; - - func_enter(); - - port->gs.port.flags &= ~GS_ACTIVE; - if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { - sx_setsignals(port, 0, 0); - sx_reconfigure_port(port); - } - - func_exit(); -} - -/* ********************************************************************** * - * Here are the routines that actually * - * interface with the rest of the system * - * ********************************************************************** */ - -static int sx_open(struct tty_struct *tty, struct file *filp) -{ - struct sx_port *port; - int retval, line; - unsigned long flags; - - func_enter(); - - if (!sx_initialized) { - return -EIO; - } - - line = tty->index; - sx_dprintk(SX_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p, " - "np=%d)\n", task_pid_nr(current), line, tty, - current->signal->tty, sx_nports); - - if ((line < 0) || (line >= SX_NPORTS) || (line >= sx_nports)) - return -ENODEV; - - port = &sx_ports[line]; - port->c_dcd = 0; /* Make sure that the first interrupt doesn't detect a - 1 -> 0 transition. */ - - sx_dprintk(SX_DEBUG_OPEN, "port = %p c_dcd = %d\n", port, port->c_dcd); - - spin_lock_irqsave(&port->gs.driver_lock, flags); - - tty->driver_data = port; - port->gs.port.tty = tty; - port->gs.port.count++; - spin_unlock_irqrestore(&port->gs.driver_lock, flags); - - sx_dprintk(SX_DEBUG_OPEN, "starting port\n"); - - /* - * Start up serial port - */ - retval = gs_init_port(&port->gs); - sx_dprintk(SX_DEBUG_OPEN, "done gs_init\n"); - if (retval) { - port->gs.port.count--; - return retval; - } - - port->gs.port.flags |= GS_ACTIVE; - if (port->gs.port.count <= 1) - sx_setsignals(port, 1, 1); - -#if 0 - if (sx_debug & SX_DEBUG_OPEN) - my_hd(port, sizeof(*port)); -#else - if (sx_debug & SX_DEBUG_OPEN) - my_hd_io(port->board->base + port->ch_base, sizeof(*port)); -#endif - - if (port->gs.port.count <= 1) { - if (sx_send_command(port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) { - printk(KERN_ERR "sx: Card didn't respond to LOPEN " - "command.\n"); - spin_lock_irqsave(&port->gs.driver_lock, flags); - port->gs.port.count--; - spin_unlock_irqrestore(&port->gs.driver_lock, flags); - return -EIO; - } - } - - retval = gs_block_til_ready(port, filp); - sx_dprintk(SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n", - retval, port->gs.port.count); - - if (retval) { -/* - * Don't lower gs.port.count here because sx_close() will be called later - */ - - return retval; - } - /* tty->low_latency = 1; */ - - port->c_dcd = sx_carrier_raised(&port->gs.port); - sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd); - - func_exit(); - return 0; - -} - -static void sx_close(void *ptr) -{ - struct sx_port *port = ptr; - /* Give the port 5 seconds to close down. */ - int to = 5 * HZ; - - func_enter(); - - sx_setsignals(port, 0, 0); - sx_reconfigure_port(port); - sx_send_command(port, HS_CLOSE, 0, 0); - - while (to-- && (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED)) - if (msleep_interruptible(10)) - break; - if (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) { - if (sx_send_command(port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED) - != 1) { - printk(KERN_ERR "sx: sent the force_close command, but " - "card didn't react\n"); - } else - sx_dprintk(SX_DEBUG_CLOSE, "sent the force_close " - "command.\n"); - } - - sx_dprintk(SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n", - 5 * HZ - to - 1, port->gs.port.count); - - if (port->gs.port.count) { - sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n", - port->gs.port.count); - /*printk("%s SETTING port count to zero: %p count: %d\n", - __func__, port, port->gs.port.count); - port->gs.port.count = 0;*/ - } - - func_exit(); -} - -/* This is relatively thorough. But then again it is only 20 lines. */ -#define MARCHUP for (i = min; i < max; i++) -#define MARCHDOWN for (i = max - 1; i >= min; i--) -#define W0 write_sx_byte(board, i, 0x55) -#define W1 write_sx_byte(board, i, 0xaa) -#define R0 if (read_sx_byte(board, i) != 0x55) return 1 -#define R1 if (read_sx_byte(board, i) != 0xaa) return 1 - -/* This memtest takes a human-noticable time. You normally only do it - once a boot, so I guess that it is worth it. */ -static int do_memtest(struct sx_board *board, int min, int max) -{ - int i; - - /* This is a marchb. Theoretically, marchb catches much more than - simpler tests. In practise, the longer test just catches more - intermittent errors. -- REW - (For the theory behind memory testing see: - Testing Semiconductor Memories by A.J. van de Goor.) */ - MARCHUP { - W0; - } - MARCHUP { - R0; - W1; - R1; - W0; - R0; - W1; - } - MARCHUP { - R1; - W0; - W1; - } - MARCHDOWN { - R1; - W0; - W1; - W0; - } - MARCHDOWN { - R0; - W1; - W0; - } - - return 0; -} - -#undef MARCHUP -#undef MARCHDOWN -#undef W0 -#undef W1 -#undef R0 -#undef R1 - -#define MARCHUP for (i = min; i < max; i += 2) -#define MARCHDOWN for (i = max - 1; i >= min; i -= 2) -#define W0 write_sx_word(board, i, 0x55aa) -#define W1 write_sx_word(board, i, 0xaa55) -#define R0 if (read_sx_word(board, i) != 0x55aa) return 1 -#define R1 if (read_sx_word(board, i) != 0xaa55) return 1 - -#if 0 -/* This memtest takes a human-noticable time. You normally only do it - once a boot, so I guess that it is worth it. */ -static int do_memtest_w(struct sx_board *board, int min, int max) -{ - int i; - - MARCHUP { - W0; - } - MARCHUP { - R0; - W1; - R1; - W0; - R0; - W1; - } - MARCHUP { - R1; - W0; - W1; - } - MARCHDOWN { - R1; - W0; - W1; - W0; - } - MARCHDOWN { - R0; - W1; - W0; - } - - return 0; -} -#endif - -static long sx_fw_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg) -{ - long rc = 0; - int __user *descr = (int __user *)arg; - int i; - static struct sx_board *board = NULL; - int nbytes, offset; - unsigned long data; - char *tmp; - - func_enter(); - - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - - tty_lock(); - - sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg); - - if (!board) - board = &boards[0]; - if (board->flags & SX_BOARD_PRESENT) { - sx_dprintk(SX_DEBUG_FIRMWARE, "Board present! (%x)\n", - board->flags); - } else { - sx_dprintk(SX_DEBUG_FIRMWARE, "Board not present! (%x) all:", - board->flags); - for (i = 0; i < SX_NBOARDS; i++) - sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags); - sx_dprintk(SX_DEBUG_FIRMWARE, "\n"); - rc = -EIO; - goto out; - } - - switch (cmd) { - case SXIO_SET_BOARD: - sx_dprintk(SX_DEBUG_FIRMWARE, "set board to %ld\n", arg); - rc = -EIO; - if (arg >= SX_NBOARDS) - break; - sx_dprintk(SX_DEBUG_FIRMWARE, "not out of range\n"); - if (!(boards[arg].flags & SX_BOARD_PRESENT)) - break; - sx_dprintk(SX_DEBUG_FIRMWARE, ".. and present!\n"); - board = &boards[arg]; - rc = 0; - /* FIXME: And this does ... nothing?? */ - break; - case SXIO_GET_TYPE: - rc = -ENOENT; /* If we manage to miss one, return error. */ - if (IS_SX_BOARD(board)) - rc = SX_TYPE_SX; - if (IS_CF_BOARD(board)) - rc = SX_TYPE_CF; - if (IS_SI_BOARD(board)) - rc = SX_TYPE_SI; - if (IS_SI1_BOARD(board)) - rc = SX_TYPE_SI; - if (IS_EISA_BOARD(board)) - rc = SX_TYPE_SI; - sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc); - break; - case SXIO_DO_RAMTEST: - if (sx_initialized) { /* Already initialized: better not ramtest the board. */ - rc = -EPERM; - break; - } - if (IS_SX_BOARD(board)) { - rc = do_memtest(board, 0, 0x7000); - if (!rc) - rc = do_memtest(board, 0, 0x7000); - /*if (!rc) rc = do_memtest_w (board, 0, 0x7000); */ - } else { - rc = do_memtest(board, 0, 0x7ff8); - /* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */ - } - sx_dprintk(SX_DEBUG_FIRMWARE, - "returning memtest result= %ld\n", rc); - break; - case SXIO_DOWNLOAD: - if (sx_initialized) {/* Already initialized */ - rc = -EEXIST; - break; - } - if (!sx_reset(board)) { - rc = -EIO; - break; - } - sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); - - tmp = kmalloc(SX_CHUNK_SIZE, GFP_USER); - if (!tmp) { - rc = -ENOMEM; - break; - } - /* FIXME: check returns */ - get_user(nbytes, descr++); - get_user(offset, descr++); - get_user(data, descr++); - while (nbytes && data) { - for (i = 0; i < nbytes; i += SX_CHUNK_SIZE) { - if (copy_from_user(tmp, (char __user *)data + i, - (i + SX_CHUNK_SIZE > nbytes) ? - nbytes - i : SX_CHUNK_SIZE)) { - kfree(tmp); - rc = -EFAULT; - goto out; - } - memcpy_toio(board->base2 + offset + i, tmp, - (i + SX_CHUNK_SIZE > nbytes) ? - nbytes - i : SX_CHUNK_SIZE); - } - - get_user(nbytes, descr++); - get_user(offset, descr++); - get_user(data, descr++); - } - kfree(tmp); - sx_nports += sx_init_board(board); - rc = sx_nports; - break; - case SXIO_INIT: - if (sx_initialized) { /* Already initialized */ - rc = -EEXIST; - break; - } - /* This is not allowed until all boards are initialized... */ - for (i = 0; i < SX_NBOARDS; i++) { - if ((boards[i].flags & SX_BOARD_PRESENT) && - !(boards[i].flags & SX_BOARD_INITIALIZED)) { - rc = -EIO; - break; - } - } - for (i = 0; i < SX_NBOARDS; i++) - if (!(boards[i].flags & SX_BOARD_PRESENT)) - break; - - sx_dprintk(SX_DEBUG_FIRMWARE, "initing portstructs, %d boards, " - "%d channels, first board: %d ports\n", - i, sx_nports, boards[0].nports); - rc = sx_init_portstructs(i, sx_nports); - sx_init_drivers(); - if (rc >= 0) - sx_initialized++; - break; - case SXIO_SETDEBUG: - sx_debug = arg; - break; - case SXIO_GETDEBUG: - rc = sx_debug; - break; - case SXIO_GETGSDEBUG: - case SXIO_SETGSDEBUG: - rc = -EINVAL; - break; - case SXIO_GETNPORTS: - rc = sx_nports; - break; - default: - rc = -ENOTTY; - break; - } -out: - tty_unlock(); - func_exit(); - return rc; -} - -static int sx_break(struct tty_struct *tty, int flag) -{ - struct sx_port *port = tty->driver_data; - int rv; - - func_enter(); - tty_lock(); - - if (flag) - rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK); - else - rv = sx_send_command(port, HS_STOP, -1, HS_IDLE_OPEN); - if (rv != 1) - printk(KERN_ERR "sx: couldn't send break (%x).\n", - read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat))); - tty_unlock(); - func_exit(); - return 0; -} - -static int sx_tiocmget(struct tty_struct *tty) -{ - struct sx_port *port = tty->driver_data; - return sx_getsignals(port); -} - -static int sx_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct sx_port *port = tty->driver_data; - int rts = -1, dtr = -1; - - if (set & TIOCM_RTS) - rts = 1; - if (set & TIOCM_DTR) - dtr = 1; - if (clear & TIOCM_RTS) - rts = 0; - if (clear & TIOCM_DTR) - dtr = 0; - - sx_setsignals(port, dtr, rts); - sx_reconfigure_port(port); - return 0; -} - -static int sx_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - int rc; - struct sx_port *port = tty->driver_data; - void __user *argp = (void __user *)arg; - - /* func_enter2(); */ - - rc = 0; - tty_lock(); - switch (cmd) { - case TIOCGSERIAL: - rc = gs_getserial(&port->gs, argp); - break; - case TIOCSSERIAL: - rc = gs_setserial(&port->gs, argp); - break; - default: - rc = -ENOIOCTLCMD; - break; - } - tty_unlock(); - - /* func_exit(); */ - return rc; -} - -/* The throttle/unthrottle scheme for the Specialix card is different - * from other drivers and deserves some explanation. - * The Specialix hardware takes care of XON/XOFF - * and CTS/RTS flow control itself. This means that all we have to - * do when signalled by the upper tty layer to throttle/unthrottle is - * to make a note of it here. When we come to read characters from the - * rx buffers on the card (sx_receive_chars()) we look to see if the - * upper layer can accept more (as noted here in sx_rx_throt[]). - * If it can't we simply don't remove chars from the cards buffer. - * When the tty layer can accept chars, we again note that here and when - * sx_receive_chars() is called it will remove them from the cards buffer. - * The card will notice that a ports buffer has drained below some low - * water mark and will unflow control the line itself, using whatever - * flow control scheme is in use for that port. -- Simon Allen - */ - -static void sx_throttle(struct tty_struct *tty) -{ - struct sx_port *port = tty->driver_data; - - func_enter2(); - /* If the port is using any type of input flow - * control then throttle the port. - */ - if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) { - port->gs.port.flags |= SX_RX_THROTTLE; - } - func_exit(); -} - -static void sx_unthrottle(struct tty_struct *tty) -{ - struct sx_port *port = tty->driver_data; - - func_enter2(); - /* Always unthrottle even if flow control is not enabled on - * this port in case we disabled flow control while the port - * was throttled - */ - port->gs.port.flags &= ~SX_RX_THROTTLE; - func_exit(); - return; -} - -/* ********************************************************************** * - * Here are the initialization routines. * - * ********************************************************************** */ - -static int sx_init_board(struct sx_board *board) -{ - int addr; - int chans; - int type; - - func_enter(); - - /* This is preceded by downloading the download code. */ - - board->flags |= SX_BOARD_INITIALIZED; - - if (read_sx_byte(board, 0)) - /* CF boards may need this. */ - write_sx_byte(board, 0, 0); - - /* This resets the processor again, to make sure it didn't do any - foolish things while we were downloading the image */ - if (!sx_reset(board)) - return 0; - - sx_start_board(board); - udelay(10); - if (!sx_busy_wait_neq(board, 0, 0xff, 0)) { - printk(KERN_ERR "sx: Ooops. Board won't initialize.\n"); - return 0; - } - - /* Ok. So now the processor on the card is running. It gathered - some info for us... */ - sx_dprintk(SX_DEBUG_INIT, "The sxcard structure:\n"); - if (sx_debug & SX_DEBUG_INIT) - my_hd_io(board->base, 0x10); - sx_dprintk(SX_DEBUG_INIT, "the first sx_module structure:\n"); - if (sx_debug & SX_DEBUG_INIT) - my_hd_io(board->base + 0x80, 0x30); - - sx_dprintk(SX_DEBUG_INIT, "init_status: %x, %dk memory, firmware " - "V%x.%02x,\n", - read_sx_byte(board, 0), read_sx_byte(board, 1), - read_sx_byte(board, 5), read_sx_byte(board, 4)); - - if (read_sx_byte(board, 0) == 0xff) { - printk(KERN_INFO "sx: No modules found. Sorry.\n"); - board->nports = 0; - return 0; - } - - chans = 0; - - if (IS_SX_BOARD(board)) { - sx_write_board_word(board, cc_int_count, sx_maxints); - } else { - if (sx_maxints) - sx_write_board_word(board, cc_int_count, - SI_PROCESSOR_CLOCK / 8 / sx_maxints); - } - - /* grab the first module type... */ - /* board->ta_type = mod_compat_type (read_sx_byte (board, 0x80 + 0x08)); */ - board->ta_type = mod_compat_type(sx_read_module_byte(board, 0x80, - mc_chip)); - - /* XXX byteorder */ - for (addr = 0x80; addr != 0; addr = read_sx_word(board, addr) & 0x7fff){ - type = sx_read_module_byte(board, addr, mc_chip); - sx_dprintk(SX_DEBUG_INIT, "Module at %x: %d channels\n", - addr, read_sx_byte(board, addr + 2)); - - chans += sx_read_module_byte(board, addr, mc_type); - - sx_dprintk(SX_DEBUG_INIT, "module is an %s, which has %s/%s " - "panels\n", - mod_type_s(type), - pan_type_s(sx_read_module_byte(board, addr, - mc_mods) & 0xf), - pan_type_s(sx_read_module_byte(board, addr, - mc_mods) >> 4)); - - sx_dprintk(SX_DEBUG_INIT, "CD1400 versions: %x/%x, ASIC " - "version: %x\n", - sx_read_module_byte(board, addr, mc_rev1), - sx_read_module_byte(board, addr, mc_rev2), - sx_read_module_byte(board, addr, mc_mtaasic_rev)); - - /* The following combinations are illegal: It should theoretically - work, but timing problems make the bus HANG. */ - - if (mod_compat_type(type) != board->ta_type) { - printk(KERN_ERR "sx: This is an invalid " - "configuration.\nDon't mix TA/MTA/SXDC on the " - "same hostadapter.\n"); - chans = 0; - break; - } - if ((IS_EISA_BOARD(board) || - IS_SI_BOARD(board)) && - (mod_compat_type(type) == 4)) { - printk(KERN_ERR "sx: This is an invalid " - "configuration.\nDon't use SXDCs on an SI/XIO " - "adapter.\n"); - chans = 0; - break; - } -#if 0 /* Problem fixed: firmware 3.05 */ - if (IS_SX_BOARD(board) && (type == TA8)) { - /* There are some issues with the firmware and the DCD/RTS - lines. It might work if you tie them together or something. - It might also work if you get a newer sx_firmware. Therefore - this is just a warning. */ - printk(KERN_WARNING - "sx: The SX host doesn't work too well " - "with the TA8 adapters.\nSpecialix is working on it.\n"); - } -#endif - } - - if (chans) { - if (board->irq > 0) { - /* fixed irq, probably PCI */ - if (sx_irqmask & (1 << board->irq)) { /* may we use this irq? */ - if (request_irq(board->irq, sx_interrupt, - IRQF_SHARED | IRQF_DISABLED, - "sx", board)) { - printk(KERN_ERR "sx: Cannot allocate " - "irq %d.\n", board->irq); - board->irq = 0; - } - } else - board->irq = 0; - } else if (board->irq < 0 && sx_irqmask) { - /* auto-allocate irq */ - int irqnr; - int irqmask = sx_irqmask & (IS_SX_BOARD(board) ? - SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK); - for (irqnr = 15; irqnr > 0; irqnr--) - if (irqmask & (1 << irqnr)) - if (!request_irq(irqnr, sx_interrupt, - IRQF_SHARED | IRQF_DISABLED, - "sx", board)) - break; - if (!irqnr) - printk(KERN_ERR "sx: Cannot allocate IRQ.\n"); - board->irq = irqnr; - } else - board->irq = 0; - - if (board->irq) { - /* Found a valid interrupt, start up interrupts! */ - sx_dprintk(SX_DEBUG_INIT, "Using irq %d.\n", - board->irq); - sx_start_interrupts(board); - board->poll = sx_slowpoll; - board->flags |= SX_IRQ_ALLOCATED; - } else { - /* no irq: setup board for polled operation */ - board->poll = sx_poll; - sx_dprintk(SX_DEBUG_INIT, "Using poll-interval %d.\n", - board->poll); - } - - /* The timer should be initialized anyway: That way we can - safely del_timer it when the module is unloaded. */ - setup_timer(&board->timer, sx_pollfunc, (unsigned long)board); - - if (board->poll) - mod_timer(&board->timer, jiffies + board->poll); - } else { - board->irq = 0; - } - - board->nports = chans; - sx_dprintk(SX_DEBUG_INIT, "returning %d ports.", board->nports); - - func_exit(); - return chans; -} - -static void __devinit printheader(void) -{ - static int header_printed; - - if (!header_printed) { - printk(KERN_INFO "Specialix SX driver " - "(C) 1998/1999 R.E.Wolff@BitWizard.nl\n"); - printk(KERN_INFO "sx: version " __stringify(SX_VERSION) "\n"); - header_printed = 1; - } -} - -static int __devinit probe_sx(struct sx_board *board) -{ - struct vpd_prom vpdp; - char *p; - int i; - - func_enter(); - - if (!IS_CF_BOARD(board)) { - sx_dprintk(SX_DEBUG_PROBE, "Going to verify vpd prom at %p.\n", - board->base + SX_VPD_ROM); - - if (sx_debug & SX_DEBUG_PROBE) - my_hd_io(board->base + SX_VPD_ROM, 0x40); - - p = (char *)&vpdp; - for (i = 0; i < sizeof(struct vpd_prom); i++) - *p++ = read_sx_byte(board, SX_VPD_ROM + i * 2); - - if (sx_debug & SX_DEBUG_PROBE) - my_hd(&vpdp, 0x20); - - sx_dprintk(SX_DEBUG_PROBE, "checking identifier...\n"); - - if (strncmp(vpdp.identifier, SX_VPD_IDENT_STRING, 16) != 0) { - sx_dprintk(SX_DEBUG_PROBE, "Got non-SX identifier: " - "'%s'\n", vpdp.identifier); - return 0; - } - } - - printheader(); - - if (!IS_CF_BOARD(board)) { - printk(KERN_DEBUG "sx: Found an SX board at %lx\n", - board->hw_base); - printk(KERN_DEBUG "sx: hw_rev: %d, assembly level: %d, " - "uniq ID:%08x, ", - vpdp.hwrev, vpdp.hwass, vpdp.uniqid); - printk("Manufactured: %d/%d\n", 1970 + vpdp.myear, vpdp.mweek); - - if ((((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) != - SX_PCI_UNIQUEID1) && (((vpdp.uniqid >> 24) & - SX_UNIQUEID_MASK) != SX_ISA_UNIQUEID1)) { - /* This might be a bit harsh. This was the primary - reason the SX/ISA card didn't work at first... */ - printk(KERN_ERR "sx: Hmm. Not an SX/PCI or SX/ISA " - "card. Sorry: giving up.\n"); - return (0); - } - - if (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) == - SX_ISA_UNIQUEID1) { - if (((unsigned long)board->hw_base) & 0x8000) { - printk(KERN_WARNING "sx: Warning: There may be " - "hardware problems with the card at " - "%lx.\n", board->hw_base); - printk(KERN_WARNING "sx: Read sx.txt for more " - "info.\n"); - } - } - } - - board->nports = -1; - - /* This resets the processor, and keeps it off the bus. */ - if (!sx_reset(board)) - return 0; - sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); - - func_exit(); - return 1; -} - -#if defined(CONFIG_ISA) || defined(CONFIG_EISA) - -/* Specialix probes for this card at 32k increments from 640k to 16M. - I consider machines with less than 16M unlikely nowadays, so I'm - not probing above 1Mb. Also, 0xa0000, 0xb0000, are taken by the VGA - card. 0xe0000 and 0xf0000 are taken by the BIOS. That only leaves - 0xc0000, 0xc8000, 0xd0000 and 0xd8000 . */ - -static int __devinit probe_si(struct sx_board *board) -{ - int i; - - func_enter(); - sx_dprintk(SX_DEBUG_PROBE, "Going to verify SI signature hw %lx at " - "%p.\n", board->hw_base, board->base + SI2_ISA_ID_BASE); - - if (sx_debug & SX_DEBUG_PROBE) - my_hd_io(board->base + SI2_ISA_ID_BASE, 0x8); - - if (!IS_EISA_BOARD(board)) { - if (IS_SI1_BOARD(board)) { - for (i = 0; i < 8; i++) { - write_sx_byte(board, SI2_ISA_ID_BASE + 7 - i,i); - } - } - for (i = 0; i < 8; i++) { - if ((read_sx_byte(board, SI2_ISA_ID_BASE + 7 - i) & 7) - != i) { - func_exit(); - return 0; - } - } - } - - /* Now we're pretty much convinced that there is an SI board here, - but to prevent trouble, we'd better double check that we don't - have an SI1 board when we're probing for an SI2 board.... */ - - write_sx_byte(board, SI2_ISA_ID_BASE, 0x10); - if (IS_SI1_BOARD(board)) { - /* This should be an SI1 board, which has this - location writable... */ - if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) { - func_exit(); - return 0; - } - } else { - /* This should be an SI2 board, which has the bottom - 3 bits non-writable... */ - if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) { - func_exit(); - return 0; - } - } - - /* Now we're pretty much convinced that there is an SI board here, - but to prevent trouble, we'd better double check that we don't - have an SI1 board when we're probing for an SI2 board.... */ - - write_sx_byte(board, SI2_ISA_ID_BASE, 0x10); - if (IS_SI1_BOARD(board)) { - /* This should be an SI1 board, which has this - location writable... */ - if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) { - func_exit(); - return 0; - } - } else { - /* This should be an SI2 board, which has the bottom - 3 bits non-writable... */ - if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) { - func_exit(); - return 0; - } - } - - printheader(); - - printk(KERN_DEBUG "sx: Found an SI board at %lx\n", board->hw_base); - /* Compared to the SX boards, it is a complete guess as to what - this card is up to... */ - - board->nports = -1; - - /* This resets the processor, and keeps it off the bus. */ - if (!sx_reset(board)) - return 0; - sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); - - func_exit(); - return 1; -} -#endif - -static const struct tty_operations sx_ops = { - .break_ctl = sx_break, - .open = sx_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = sx_ioctl, - .throttle = sx_throttle, - .unthrottle = sx_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, - .tiocmget = sx_tiocmget, - .tiocmset = sx_tiocmset, -}; - -static const struct tty_port_operations sx_port_ops = { - .carrier_raised = sx_carrier_raised, -}; - -static int sx_init_drivers(void) -{ - int error; - - func_enter(); - - sx_driver = alloc_tty_driver(sx_nports); - if (!sx_driver) - return 1; - sx_driver->owner = THIS_MODULE; - sx_driver->driver_name = "specialix_sx"; - sx_driver->name = "ttyX"; - sx_driver->major = SX_NORMAL_MAJOR; - sx_driver->type = TTY_DRIVER_TYPE_SERIAL; - sx_driver->subtype = SERIAL_TYPE_NORMAL; - sx_driver->init_termios = tty_std_termios; - sx_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - sx_driver->init_termios.c_ispeed = 9600; - sx_driver->init_termios.c_ospeed = 9600; - sx_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(sx_driver, &sx_ops); - - if ((error = tty_register_driver(sx_driver))) { - put_tty_driver(sx_driver); - printk(KERN_ERR "sx: Couldn't register sx driver, error = %d\n", - error); - return 1; - } - func_exit(); - return 0; -} - -static int sx_init_portstructs(int nboards, int nports) -{ - struct sx_board *board; - struct sx_port *port; - int i, j; - int addr, chans; - int portno; - - func_enter(); - - /* Many drivers statically allocate the maximum number of ports - There is no reason not to allocate them dynamically. - Is there? -- REW */ - sx_ports = kcalloc(nports, sizeof(struct sx_port), GFP_KERNEL); - if (!sx_ports) - return -ENOMEM; - - port = sx_ports; - for (i = 0; i < nboards; i++) { - board = &boards[i]; - board->ports = port; - for (j = 0; j < boards[i].nports; j++) { - sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j); - tty_port_init(&port->gs.port); - port->gs.port.ops = &sx_port_ops; - port->gs.magic = SX_MAGIC; - port->gs.close_delay = HZ / 2; - port->gs.closing_wait = 30 * HZ; - port->board = board; - port->gs.rd = &sx_real_driver; -#ifdef NEW_WRITE_LOCKING - port->gs.port_write_mutex = MUTEX; -#endif - spin_lock_init(&port->gs.driver_lock); - /* - * Initializing wait queue - */ - port++; - } - } - - port = sx_ports; - portno = 0; - for (i = 0; i < nboards; i++) { - board = &boards[i]; - board->port_base = portno; - /* Possibly the configuration was rejected. */ - sx_dprintk(SX_DEBUG_PROBE, "Board has %d channels\n", - board->nports); - if (board->nports <= 0) - continue; - /* XXX byteorder ?? */ - for (addr = 0x80; addr != 0; - addr = read_sx_word(board, addr) & 0x7fff) { - chans = sx_read_module_byte(board, addr, mc_type); - sx_dprintk(SX_DEBUG_PROBE, "Module at %x: %d " - "channels\n", addr, chans); - sx_dprintk(SX_DEBUG_PROBE, "Port at"); - for (j = 0; j < chans; j++) { - /* The "sx-way" is the way it SHOULD be done. - That way in the future, the firmware may for - example pack the structures a bit more - efficient. Neil tells me it isn't going to - happen anytime soon though. */ - if (IS_SX_BOARD(board)) - port->ch_base = sx_read_module_word( - board, addr + j * 2, - mc_chan_pointer); - else - port->ch_base = addr + 0x100 + 0x300 *j; - - sx_dprintk(SX_DEBUG_PROBE, " %x", - port->ch_base); - port->line = portno++; - port++; - } - sx_dprintk(SX_DEBUG_PROBE, "\n"); - } - /* This has to be done earlier. */ - /* board->flags |= SX_BOARD_INITIALIZED; */ - } - - func_exit(); - return 0; -} - -static unsigned int sx_find_free_board(void) -{ - unsigned int i; - - for (i = 0; i < SX_NBOARDS; i++) - if (!(boards[i].flags & SX_BOARD_PRESENT)) - break; - - return i; -} - -static void __exit sx_release_drivers(void) -{ - func_enter(); - tty_unregister_driver(sx_driver); - put_tty_driver(sx_driver); - func_exit(); -} - -static void __devexit sx_remove_card(struct sx_board *board, - struct pci_dev *pdev) -{ - if (board->flags & SX_BOARD_INITIALIZED) { - /* The board should stop messing with us. (actually I mean the - interrupt) */ - sx_reset(board); - if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED)) - free_irq(board->irq, board); - - /* It is safe/allowed to del_timer a non-active timer */ - del_timer(&board->timer); - if (pdev) { -#ifdef CONFIG_PCI - iounmap(board->base2); - pci_release_region(pdev, IS_CF_BOARD(board) ? 3 : 2); -#endif - } else { - iounmap(board->base); - release_region(board->hw_base, board->hw_len); - } - - board->flags &= ~(SX_BOARD_INITIALIZED | SX_BOARD_PRESENT); - } -} - -#ifdef CONFIG_EISA - -static int __devinit sx_eisa_probe(struct device *dev) -{ - struct eisa_device *edev = to_eisa_device(dev); - struct sx_board *board; - unsigned long eisa_slot = edev->base_addr; - unsigned int i; - int retval = -EIO; - - mutex_lock(&sx_boards_lock); - i = sx_find_free_board(); - if (i == SX_NBOARDS) { - mutex_unlock(&sx_boards_lock); - goto err; - } - board = &boards[i]; - board->flags |= SX_BOARD_PRESENT; - mutex_unlock(&sx_boards_lock); - - dev_info(dev, "XIO : Signature found in EISA slot %lu, " - "Product %d Rev %d (REPORT THIS TO LKLM)\n", - eisa_slot >> 12, - inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 2), - inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 3)); - - board->eisa_base = eisa_slot; - board->flags &= ~SX_BOARD_TYPE; - board->flags |= SI_EISA_BOARD; - - board->hw_base = ((inb(eisa_slot + 0xc01) << 8) + - inb(eisa_slot + 0xc00)) << 16; - board->hw_len = SI2_EISA_WINDOW_LEN; - if (!request_region(board->hw_base, board->hw_len, "sx")) { - dev_err(dev, "can't request region\n"); - goto err_flag; - } - board->base2 = - board->base = ioremap_nocache(board->hw_base, SI2_EISA_WINDOW_LEN); - if (!board->base) { - dev_err(dev, "can't remap memory\n"); - goto err_reg; - } - - sx_dprintk(SX_DEBUG_PROBE, "IO hw_base address: %lx\n", board->hw_base); - sx_dprintk(SX_DEBUG_PROBE, "base: %p\n", board->base); - board->irq = inb(eisa_slot + 0xc02) >> 4; - sx_dprintk(SX_DEBUG_PROBE, "IRQ: %d\n", board->irq); - - if (!probe_si(board)) - goto err_unmap; - - dev_set_drvdata(dev, board); - - return 0; -err_unmap: - iounmap(board->base); -err_reg: - release_region(board->hw_base, board->hw_len); -err_flag: - board->flags &= ~SX_BOARD_PRESENT; -err: - return retval; -} - -static int __devexit sx_eisa_remove(struct device *dev) -{ - struct sx_board *board = dev_get_drvdata(dev); - - sx_remove_card(board, NULL); - - return 0; -} - -static struct eisa_device_id sx_eisa_tbl[] = { - { "SLX" }, - { "" } -}; - -MODULE_DEVICE_TABLE(eisa, sx_eisa_tbl); - -static struct eisa_driver sx_eisadriver = { - .id_table = sx_eisa_tbl, - .driver = { - .name = "sx", - .probe = sx_eisa_probe, - .remove = __devexit_p(sx_eisa_remove), - } -}; - -#endif - -#ifdef CONFIG_PCI - /******************************************************** - * Setting bit 17 in the CNTRL register of the PLX 9050 * - * chip forces a retry on writes while a read is pending.* - * This is to prevent the card locking up on Intel Xeon * - * multiprocessor systems with the NX chipset. -- NV * - ********************************************************/ - -/* Newer cards are produced with this bit set from the configuration - EEprom. As the bit is read/write for the CPU, we can fix it here, - if we detect that it isn't set correctly. -- REW */ - -static void __devinit fix_sx_pci(struct pci_dev *pdev, struct sx_board *board) -{ - unsigned int hwbase; - void __iomem *rebase; - unsigned int t; - -#define CNTRL_REG_OFFSET 0x50 -#define CNTRL_REG_GOODVALUE 0x18260000 - - pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase); - hwbase &= PCI_BASE_ADDRESS_MEM_MASK; - rebase = ioremap_nocache(hwbase, 0x80); - t = readl(rebase + CNTRL_REG_OFFSET); - if (t != CNTRL_REG_GOODVALUE) { - printk(KERN_DEBUG "sx: performing cntrl reg fix: %08x -> " - "%08x\n", t, CNTRL_REG_GOODVALUE); - writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET); - } - iounmap(rebase); -} -#endif - -static int __devinit sx_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ -#ifdef CONFIG_PCI - struct sx_board *board; - unsigned int i, reg; - int retval = -EIO; - - mutex_lock(&sx_boards_lock); - i = sx_find_free_board(); - if (i == SX_NBOARDS) { - mutex_unlock(&sx_boards_lock); - goto err; - } - board = &boards[i]; - board->flags |= SX_BOARD_PRESENT; - mutex_unlock(&sx_boards_lock); - - retval = pci_enable_device(pdev); - if (retval) - goto err_flag; - - board->flags &= ~SX_BOARD_TYPE; - board->flags |= (pdev->subsystem_vendor == 0x200) ? SX_PCI_BOARD : - SX_CFPCI_BOARD; - - /* CF boards use base address 3.... */ - reg = IS_CF_BOARD(board) ? 3 : 2; - retval = pci_request_region(pdev, reg, "sx"); - if (retval) { - dev_err(&pdev->dev, "can't request region\n"); - goto err_flag; - } - board->hw_base = pci_resource_start(pdev, reg); - board->base2 = - board->base = ioremap_nocache(board->hw_base, WINDOW_LEN(board)); - if (!board->base) { - dev_err(&pdev->dev, "ioremap failed\n"); - goto err_reg; - } - - /* Most of the stuff on the CF board is offset by 0x18000 .... */ - if (IS_CF_BOARD(board)) - board->base += 0x18000; - - board->irq = pdev->irq; - - dev_info(&pdev->dev, "Got a specialix card: %p(%d) %x.\n", board->base, - board->irq, board->flags); - - if (!probe_sx(board)) { - retval = -EIO; - goto err_unmap; - } - - fix_sx_pci(pdev, board); - - pci_set_drvdata(pdev, board); - - return 0; -err_unmap: - iounmap(board->base2); -err_reg: - pci_release_region(pdev, reg); -err_flag: - board->flags &= ~SX_BOARD_PRESENT; -err: - return retval; -#else - return -ENODEV; -#endif -} - -static void __devexit sx_pci_remove(struct pci_dev *pdev) -{ - struct sx_board *board = pci_get_drvdata(pdev); - - sx_remove_card(board, pdev); -} - -/* Specialix has a whole bunch of cards with 0x2000 as the device ID. They say - its because the standard requires it. So check for SUBVENDOR_ID. */ -static struct pci_device_id sx_pci_tbl[] = { - { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, - .subvendor = PCI_ANY_ID, .subdevice = 0x0200 }, - { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, - .subvendor = PCI_ANY_ID, .subdevice = 0x0300 }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, sx_pci_tbl); - -static struct pci_driver sx_pcidriver = { - .name = "sx", - .id_table = sx_pci_tbl, - .probe = sx_pci_probe, - .remove = __devexit_p(sx_pci_remove) -}; - -static int __init sx_init(void) -{ -#ifdef CONFIG_EISA - int retval1; -#endif -#ifdef CONFIG_ISA - struct sx_board *board; - unsigned int i; -#endif - unsigned int found = 0; - int retval; - - func_enter(); - sx_dprintk(SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n", - sx_debug); - if (abs((long)(&sx_debug) - sx_debug) < 0x10000) { - printk(KERN_WARNING "sx: sx_debug is an address, instead of a " - "value. Assuming -1.\n(%p)\n", &sx_debug); - sx_debug = -1; - } - - if (misc_register(&sx_fw_device) < 0) { - printk(KERN_ERR "SX: Unable to register firmware loader " - "driver.\n"); - return -EIO; - } -#ifdef CONFIG_ISA - for (i = 0; i < NR_SX_ADDRS; i++) { - board = &boards[found]; - board->hw_base = sx_probe_addrs[i]; - board->hw_len = SX_WINDOW_LEN; - if (!request_region(board->hw_base, board->hw_len, "sx")) - continue; - board->base2 = - board->base = ioremap_nocache(board->hw_base, board->hw_len); - if (!board->base) - goto err_sx_reg; - board->flags &= ~SX_BOARD_TYPE; - board->flags |= SX_ISA_BOARD; - board->irq = sx_irqmask ? -1 : 0; - - if (probe_sx(board)) { - board->flags |= SX_BOARD_PRESENT; - found++; - } else { - iounmap(board->base); -err_sx_reg: - release_region(board->hw_base, board->hw_len); - } - } - - for (i = 0; i < NR_SI_ADDRS; i++) { - board = &boards[found]; - board->hw_base = si_probe_addrs[i]; - board->hw_len = SI2_ISA_WINDOW_LEN; - if (!request_region(board->hw_base, board->hw_len, "sx")) - continue; - board->base2 = - board->base = ioremap_nocache(board->hw_base, board->hw_len); - if (!board->base) - goto err_si_reg; - board->flags &= ~SX_BOARD_TYPE; - board->flags |= SI_ISA_BOARD; - board->irq = sx_irqmask ? -1 : 0; - - if (probe_si(board)) { - board->flags |= SX_BOARD_PRESENT; - found++; - } else { - iounmap(board->base); -err_si_reg: - release_region(board->hw_base, board->hw_len); - } - } - for (i = 0; i < NR_SI1_ADDRS; i++) { - board = &boards[found]; - board->hw_base = si1_probe_addrs[i]; - board->hw_len = SI1_ISA_WINDOW_LEN; - if (!request_region(board->hw_base, board->hw_len, "sx")) - continue; - board->base2 = - board->base = ioremap_nocache(board->hw_base, board->hw_len); - if (!board->base) - goto err_si1_reg; - board->flags &= ~SX_BOARD_TYPE; - board->flags |= SI1_ISA_BOARD; - board->irq = sx_irqmask ? -1 : 0; - - if (probe_si(board)) { - board->flags |= SX_BOARD_PRESENT; - found++; - } else { - iounmap(board->base); -err_si1_reg: - release_region(board->hw_base, board->hw_len); - } - } -#endif -#ifdef CONFIG_EISA - retval1 = eisa_driver_register(&sx_eisadriver); -#endif - retval = pci_register_driver(&sx_pcidriver); - - if (found) { - printk(KERN_INFO "sx: total of %d boards detected.\n", found); - retval = 0; - } else if (retval) { -#ifdef CONFIG_EISA - retval = retval1; - if (retval1) -#endif - misc_deregister(&sx_fw_device); - } - - func_exit(); - return retval; -} - -static void __exit sx_exit(void) -{ - int i; - - func_enter(); -#ifdef CONFIG_EISA - eisa_driver_unregister(&sx_eisadriver); -#endif - pci_unregister_driver(&sx_pcidriver); - - for (i = 0; i < SX_NBOARDS; i++) - sx_remove_card(&boards[i], NULL); - - if (misc_deregister(&sx_fw_device) < 0) { - printk(KERN_INFO "sx: couldn't deregister firmware loader " - "device\n"); - } - sx_dprintk(SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n", - sx_initialized); - if (sx_initialized) - sx_release_drivers(); - - kfree(sx_ports); - func_exit(); -} - -module_init(sx_init); -module_exit(sx_exit); diff --git a/drivers/char/sx.h b/drivers/char/sx.h deleted file mode 100644 index 87c2defdead7..000000000000 --- a/drivers/char/sx.h +++ /dev/null @@ -1,201 +0,0 @@ - -/* - * sx.h - * - * Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl - * - * SX serial driver. - * -- Supports SI, XIO and SX host cards. - * -- Supports TAs, MTAs and SXDCs. - * - * Version 1.3 -- March, 1999. - * - */ - -#define SX_NBOARDS 4 -#define SX_PORTSPERBOARD 32 -#define SX_NPORTS (SX_NBOARDS * SX_PORTSPERBOARD) - -#ifdef __KERNEL__ - -#define SX_MAGIC 0x12345678 - -struct sx_port { - struct gs_port gs; - struct wait_queue *shutdown_wait; - int ch_base; - int c_dcd; - struct sx_board *board; - int line; - unsigned long locks; -}; - -struct sx_board { - int magic; - void __iomem *base; - void __iomem *base2; - unsigned long hw_base; - resource_size_t hw_len; - int eisa_base; - int port_base; /* Number of the first port */ - struct sx_port *ports; - int nports; - int flags; - int irq; - int poll; - int ta_type; - struct timer_list timer; - unsigned long locks; -}; - -struct vpd_prom { - unsigned short id; - char hwrev; - char hwass; - int uniqid; - char myear; - char mweek; - char hw_feature[5]; - char oem_id; - char identifier[16]; -}; - -#ifndef MOD_RS232DB25MALE -#define MOD_RS232DB25MALE 0x0a -#endif - -#define SI_ISA_BOARD 0x00000001 -#define SX_ISA_BOARD 0x00000002 -#define SX_PCI_BOARD 0x00000004 -#define SX_CFPCI_BOARD 0x00000008 -#define SX_CFISA_BOARD 0x00000010 -#define SI_EISA_BOARD 0x00000020 -#define SI1_ISA_BOARD 0x00000040 - -#define SX_BOARD_PRESENT 0x00001000 -#define SX_BOARD_INITIALIZED 0x00002000 -#define SX_IRQ_ALLOCATED 0x00004000 - -#define SX_BOARD_TYPE 0x000000ff - -#define IS_SX_BOARD(board) (board->flags & (SX_PCI_BOARD | SX_CFPCI_BOARD | \ - SX_ISA_BOARD | SX_CFISA_BOARD)) - -#define IS_SI_BOARD(board) (board->flags & SI_ISA_BOARD) -#define IS_SI1_BOARD(board) (board->flags & SI1_ISA_BOARD) - -#define IS_EISA_BOARD(board) (board->flags & SI_EISA_BOARD) - -#define IS_CF_BOARD(board) (board->flags & (SX_CFISA_BOARD | SX_CFPCI_BOARD)) - -/* The SI processor clock is required to calculate the cc_int_count register - value for the SI cards. */ -#define SI_PROCESSOR_CLOCK 25000000 - - -/* port flags */ -/* Make sure these don't clash with gs flags or async flags */ -#define SX_RX_THROTTLE 0x0000001 - - - -#define SX_PORT_TRANSMIT_LOCK 0 -#define SX_BOARD_INTR_LOCK 0 - - - -/* Debug flags. Add these together to get more debug info. */ - -#define SX_DEBUG_OPEN 0x00000001 -#define SX_DEBUG_SETTING 0x00000002 -#define SX_DEBUG_FLOW 0x00000004 -#define SX_DEBUG_MODEMSIGNALS 0x00000008 -#define SX_DEBUG_TERMIOS 0x00000010 -#define SX_DEBUG_TRANSMIT 0x00000020 -#define SX_DEBUG_RECEIVE 0x00000040 -#define SX_DEBUG_INTERRUPTS 0x00000080 -#define SX_DEBUG_PROBE 0x00000100 -#define SX_DEBUG_INIT 0x00000200 -#define SX_DEBUG_CLEANUP 0x00000400 -#define SX_DEBUG_CLOSE 0x00000800 -#define SX_DEBUG_FIRMWARE 0x00001000 -#define SX_DEBUG_MEMTEST 0x00002000 - -#define SX_DEBUG_ALL 0xffffffff - - -#define O_OTHER(tty) \ - ((O_OLCUC(tty)) ||\ - (O_ONLCR(tty)) ||\ - (O_OCRNL(tty)) ||\ - (O_ONOCR(tty)) ||\ - (O_ONLRET(tty)) ||\ - (O_OFILL(tty)) ||\ - (O_OFDEL(tty)) ||\ - (O_NLDLY(tty)) ||\ - (O_CRDLY(tty)) ||\ - (O_TABDLY(tty)) ||\ - (O_BSDLY(tty)) ||\ - (O_VTDLY(tty)) ||\ - (O_FFDLY(tty))) - -/* Same for input. */ -#define I_OTHER(tty) \ - ((I_INLCR(tty)) ||\ - (I_IGNCR(tty)) ||\ - (I_ICRNL(tty)) ||\ - (I_IUCLC(tty)) ||\ - (L_ISIG(tty))) - -#define MOD_TA ( TA>>4) -#define MOD_MTA (MTA_CD1400>>4) -#define MOD_SXDC ( SXDC>>4) - - -/* We copy the download code over to the card in chunks of ... bytes */ -#define SX_CHUNK_SIZE 128 - -#endif /* __KERNEL__ */ - - - -/* Specialix document 6210046-11 page 3 */ -#define SPX(X) (('S'<<24) | ('P' << 16) | (X)) - -/* Specialix-Linux specific IOCTLS. */ -#define SPXL(X) (SPX(('L' << 8) | (X))) - - -#define SXIO_SET_BOARD SPXL(0x01) -#define SXIO_GET_TYPE SPXL(0x02) -#define SXIO_DOWNLOAD SPXL(0x03) -#define SXIO_INIT SPXL(0x04) -#define SXIO_SETDEBUG SPXL(0x05) -#define SXIO_GETDEBUG SPXL(0x06) -#define SXIO_DO_RAMTEST SPXL(0x07) -#define SXIO_SETGSDEBUG SPXL(0x08) -#define SXIO_GETGSDEBUG SPXL(0x09) -#define SXIO_GETNPORTS SPXL(0x0a) - - -#ifndef SXCTL_MISC_MINOR -/* Allow others to gather this into "major.h" or something like that */ -#define SXCTL_MISC_MINOR 167 -#endif - -#ifndef SX_NORMAL_MAJOR -/* This allows overriding on the compiler commandline, or in a "major.h" - include or something like that */ -#define SX_NORMAL_MAJOR 32 -#define SX_CALLOUT_MAJOR 33 -#endif - - -#define SX_TYPE_SX 0x01 -#define SX_TYPE_SI 0x02 -#define SX_TYPE_CF 0x03 - - -#define WINDOW_LEN(board) (IS_CF_BOARD(board)?0x20000:SX_WINDOW_LEN) -/* Need a #define for ^^^^^^^ !!! */ - diff --git a/drivers/char/sxboards.h b/drivers/char/sxboards.h deleted file mode 100644 index 427927dc7dbf..000000000000 --- a/drivers/char/sxboards.h +++ /dev/null @@ -1,206 +0,0 @@ -/************************************************************************/ -/* */ -/* Title : SX/SI/XIO Board Hardware Definitions */ -/* */ -/* Author : N.P.Vassallo */ -/* */ -/* Creation : 16th March 1998 */ -/* */ -/* Version : 3.0.0 */ -/* */ -/* Copyright : (c) Specialix International Ltd. 1998 */ -/* */ -/* Description : Prototypes, structures and definitions */ -/* describing the SX/SI/XIO board hardware */ -/* */ -/************************************************************************/ - -/* History... - -3.0.0 16/03/98 NPV Creation. - -*/ - -#ifndef _sxboards_h /* If SXBOARDS.H not already defined */ -#define _sxboards_h 1 - -/***************************************************************************** -******************************* ****************************** -******************************* Board Types ****************************** -******************************* ****************************** -*****************************************************************************/ - -/* BUS types... */ -#define BUS_ISA 0 -#define BUS_MCA 1 -#define BUS_EISA 2 -#define BUS_PCI 3 - -/* Board phases... */ -#define SI1_Z280 1 -#define SI2_Z280 2 -#define SI3_T225 3 - -/* Board types... */ -#define CARD_TYPE(bus,phase) (bus<<4|phase) -#define CARD_BUS(type) ((type>>4)&0xF) -#define CARD_PHASE(type) (type&0xF) - -#define TYPE_SI1_ISA CARD_TYPE(BUS_ISA,SI1_Z280) -#define TYPE_SI2_ISA CARD_TYPE(BUS_ISA,SI2_Z280) -#define TYPE_SI2_EISA CARD_TYPE(BUS_EISA,SI2_Z280) -#define TYPE_SI2_PCI CARD_TYPE(BUS_PCI,SI2_Z280) - -#define TYPE_SX_ISA CARD_TYPE(BUS_ISA,SI3_T225) -#define TYPE_SX_PCI CARD_TYPE(BUS_PCI,SI3_T225) -/***************************************************************************** -****************************** ****************************** -****************************** Phase 1 Z280 ****************************** -****************************** ****************************** -*****************************************************************************/ - -/* ISA board details... */ -#define SI1_ISA_WINDOW_LEN 0x10000 /* 64 Kbyte shared memory window */ -//#define SI1_ISA_MEMORY_LEN 0x8000 /* Usable memory - unused define*/ -//#define SI1_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ -//#define SI1_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ -//#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */ -//#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */ - -/* ISA board, register definitions... */ -//#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */ -#define SI1_ISA_RESET 0x8000 /* WRITE: Host Reset */ -#define SI1_ISA_RESET_CLEAR 0xc000 /* WRITE: Host Reset clear*/ -#define SI1_ISA_WAIT 0x9000 /* WRITE: Host wait */ -#define SI1_ISA_WAIT_CLEAR 0xd000 /* WRITE: Host wait clear */ -#define SI1_ISA_INTCL 0xa000 /* WRITE: Host Reset */ -#define SI1_ISA_INTCL_CLEAR 0xe000 /* WRITE: Host Reset */ - - -/***************************************************************************** -****************************** ****************************** -****************************** Phase 2 Z280 ****************************** -****************************** ****************************** -*****************************************************************************/ - -/* ISA board details... */ -#define SI2_ISA_WINDOW_LEN 0x8000 /* 32 Kbyte shared memory window */ -#define SI2_ISA_MEMORY_LEN 0x7FF8 /* Usable memory */ -#define SI2_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ -#define SI2_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ -#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */ -#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */ - -/* ISA board, register definitions... */ -#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */ -#define SI2_ISA_RESET SI2_ISA_ID_BASE /* WRITE: Host Reset */ -#define SI2_ISA_IRQ11 (SI2_ISA_ID_BASE+1) /* WRITE: Set IRQ11 */ -#define SI2_ISA_IRQ12 (SI2_ISA_ID_BASE+2) /* WRITE: Set IRQ12 */ -#define SI2_ISA_IRQ15 (SI2_ISA_ID_BASE+3) /* WRITE: Set IRQ15 */ -#define SI2_ISA_IRQSET (SI2_ISA_ID_BASE+4) /* WRITE: Set Host Interrupt */ -#define SI2_ISA_INTCLEAR (SI2_ISA_ID_BASE+5) /* WRITE: Enable Host Interrupt */ - -#define SI2_ISA_IRQ11_SET 0x10 -#define SI2_ISA_IRQ11_CLEAR 0x00 -#define SI2_ISA_IRQ12_SET 0x10 -#define SI2_ISA_IRQ12_CLEAR 0x00 -#define SI2_ISA_IRQ15_SET 0x10 -#define SI2_ISA_IRQ15_CLEAR 0x00 -#define SI2_ISA_INTCLEAR_SET 0x10 -#define SI2_ISA_INTCLEAR_CLEAR 0x00 -#define SI2_ISA_IRQSET_CLEAR 0x10 -#define SI2_ISA_IRQSET_SET 0x00 -#define SI2_ISA_RESET_SET 0x00 -#define SI2_ISA_RESET_CLEAR 0x10 - -/* PCI board details... */ -#define SI2_PCI_WINDOW_LEN 0x100000 /* 1 Mbyte memory window */ - -/* PCI board register definitions... */ -#define SI2_PCI_SET_IRQ 0x40001 /* Set Host Interrupt */ -#define SI2_PCI_RESET 0xC0001 /* Host Reset */ - -/***************************************************************************** -****************************** ****************************** -****************************** Phase 3 T225 ****************************** -****************************** ****************************** -*****************************************************************************/ - -/* General board details... */ -#define SX_WINDOW_LEN 64*1024 /* 64 Kbyte memory window */ - -/* ISA board details... */ -#define SX_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ -#define SX_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ -#define SX_ISA_ADDR_STEP SX_WINDOW_LEN /* ISA board address step */ -#define SX_ISA_IRQ_MASK 0x9E00 /* IRQs 15,12,11,10,9 */ - -/* Hardware register definitions... */ -#define SX_EVENT_STATUS 0x7800 /* READ: T225 Event Status */ -#define SX_EVENT_STROBE 0x7800 /* WRITE: T225 Event Strobe */ -#define SX_EVENT_ENABLE 0x7880 /* WRITE: T225 Event Enable */ -#define SX_VPD_ROM 0x7C00 /* READ: Vital Product Data ROM */ -#define SX_CONFIG 0x7C00 /* WRITE: Host Configuration Register */ -#define SX_IRQ_STATUS 0x7C80 /* READ: Host Interrupt Status */ -#define SX_SET_IRQ 0x7C80 /* WRITE: Set Host Interrupt */ -#define SX_RESET_STATUS 0x7D00 /* READ: Host Reset Status */ -#define SX_RESET 0x7D00 /* WRITE: Host Reset */ -#define SX_RESET_IRQ 0x7D80 /* WRITE: Reset Host Interrupt */ - -/* SX_VPD_ROM definitions... */ -#define SX_VPD_SLX_ID1 0x00 -#define SX_VPD_SLX_ID2 0x01 -#define SX_VPD_HW_REV 0x02 -#define SX_VPD_HW_ASSEM 0x03 -#define SX_VPD_UNIQUEID4 0x04 -#define SX_VPD_UNIQUEID3 0x05 -#define SX_VPD_UNIQUEID2 0x06 -#define SX_VPD_UNIQUEID1 0x07 -#define SX_VPD_MANU_YEAR 0x08 -#define SX_VPD_MANU_WEEK 0x09 -#define SX_VPD_IDENT 0x10 -#define SX_VPD_IDENT_STRING "JET HOST BY KEV#" - -/* SX unique identifiers... */ -#define SX_UNIQUEID_MASK 0xF0 -#define SX_ISA_UNIQUEID1 0x20 -#define SX_PCI_UNIQUEID1 0x50 - -/* SX_CONFIG definitions... */ -#define SX_CONF_BUSEN 0x02 /* Enable T225 memory and I/O */ -#define SX_CONF_HOSTIRQ 0x04 /* Enable board to host interrupt */ - -/* SX bootstrap... */ -#define SX_BOOTSTRAP "\x28\x20\x21\x02\x60\x0a" -#define SX_BOOTSTRAP_SIZE 6 -#define SX_BOOTSTRAP_ADDR (0x8000-SX_BOOTSTRAP_SIZE) - -/***************************************************************************** -********************************** ********************************** -********************************** EISA ********************************** -********************************** ********************************** -*****************************************************************************/ - -#define SI2_EISA_OFF 0x42 -#define SI2_EISA_VAL 0x01 -#define SI2_EISA_WINDOW_LEN 0x10000 - -/***************************************************************************** -*********************************** ********************************** -*********************************** PCI ********************************** -*********************************** ********************************** -*****************************************************************************/ - -/* General definitions... */ - -#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */ -#define SPX_DEVICE_ID 0x4000 /* SI/XIO boards */ -#define SPX_PLXDEVICE_ID 0x2000 /* SX boards */ - -#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */ -#define SI2_SUB_SYS_ID 0x400 /* Phase 2 (Z280) board */ -#define SX_SUB_SYS_ID 0x200 /* Phase 3 (t225) board */ - -#endif /*_sxboards_h */ - -/* End of SXBOARDS.H */ diff --git a/drivers/char/sxwindow.h b/drivers/char/sxwindow.h deleted file mode 100644 index cf01b662aefc..000000000000 --- a/drivers/char/sxwindow.h +++ /dev/null @@ -1,393 +0,0 @@ -/************************************************************************/ -/* */ -/* Title : SX Shared Memory Window Structure */ -/* */ -/* Author : N.P.Vassallo */ -/* */ -/* Creation : 16th March 1998 */ -/* */ -/* Version : 3.0.0 */ -/* */ -/* Copyright : (c) Specialix International Ltd. 1998 */ -/* */ -/* Description : Prototypes, structures and definitions */ -/* describing the SX/SI/XIO cards shared */ -/* memory window structure: */ -/* SXCARD */ -/* SXMODULE */ -/* SXCHANNEL */ -/* */ -/************************************************************************/ - -/* History... - -3.0.0 16/03/98 NPV Creation. (based on STRUCT.H) - -*/ - -#ifndef _sxwindow_h /* If SXWINDOW.H not already defined */ -#define _sxwindow_h 1 - -/***************************************************************************** -*************************** *************************** -*************************** Common Definitions *************************** -*************************** *************************** -*****************************************************************************/ - -typedef struct _SXCARD *PSXCARD; /* SXCARD structure pointer */ -typedef struct _SXMODULE *PMOD; /* SXMODULE structure pointer */ -typedef struct _SXCHANNEL *PCHAN; /* SXCHANNEL structure pointer */ - -/***************************************************************************** -********************************* ********************************* -********************************* SXCARD ********************************* -********************************* ********************************* -*****************************************************************************/ - -typedef struct _SXCARD -{ - BYTE cc_init_status; /* 0x00 Initialisation status */ - BYTE cc_mem_size; /* 0x01 Size of memory on card */ - WORD cc_int_count; /* 0x02 Interrupt count */ - WORD cc_revision; /* 0x04 Download code revision */ - BYTE cc_isr_count; /* 0x06 Count when ISR is run */ - BYTE cc_main_count; /* 0x07 Count when main loop is run */ - WORD cc_int_pending; /* 0x08 Interrupt pending */ - WORD cc_poll_count; /* 0x0A Count when poll is run */ - BYTE cc_int_set_count; /* 0x0C Count when host interrupt is set */ - BYTE cc_rfu[0x80 - 0x0D]; /* 0x0D Pad structure to 128 bytes (0x80) */ - -} SXCARD; - -/* SXCARD.cc_init_status definitions... */ -#define ADAPTERS_FOUND (BYTE)0x01 -#define NO_ADAPTERS_FOUND (BYTE)0xFF - -/* SXCARD.cc_mem_size definitions... */ -#define SX_MEMORY_SIZE (BYTE)0x40 - -/* SXCARD.cc_int_count definitions... */ -#define INT_COUNT_DEFAULT 100 /* Hz */ - -/***************************************************************************** -******************************** ******************************** -******************************** SXMODULE ******************************** -******************************** ******************************** -*****************************************************************************/ - -#define TOP_POINTER(a) ((a)|0x8000) /* Sets top bit of word */ -#define UNTOP_POINTER(a) ((a)&~0x8000) /* Clears top bit of word */ - -typedef struct _SXMODULE -{ - WORD mc_next; /* 0x00 Next module "pointer" (ORed with 0x8000) */ - BYTE mc_type; /* 0x02 Type of TA in terms of number of channels */ - BYTE mc_mod_no; /* 0x03 Module number on SI bus cable (0 closest to card) */ - BYTE mc_dtr; /* 0x04 Private DTR copy (TA only) */ - BYTE mc_rfu1; /* 0x05 Reserved */ - WORD mc_uart; /* 0x06 UART base address for this module */ - BYTE mc_chip; /* 0x08 Chip type / number of ports */ - BYTE mc_current_uart; /* 0x09 Current uart selected for this module */ -#ifdef DOWNLOAD - PCHAN mc_chan_pointer[8]; /* 0x0A Pointer to each channel structure */ -#else - WORD mc_chan_pointer[8]; /* 0x0A Define as WORD if not compiling into download */ -#endif - WORD mc_rfu2; /* 0x1A Reserved */ - BYTE mc_opens1; /* 0x1C Number of open ports on first four ports on MTA/SXDC */ - BYTE mc_opens2; /* 0x1D Number of open ports on second four ports on MTA/SXDC */ - BYTE mc_mods; /* 0x1E Types of connector module attached to MTA/SXDC */ - BYTE mc_rev1; /* 0x1F Revision of first CD1400 on MTA/SXDC */ - BYTE mc_rev2; /* 0x20 Revision of second CD1400 on MTA/SXDC */ - BYTE mc_mtaasic_rev; /* 0x21 Revision of MTA ASIC 1..4 -> A, B, C, D */ - BYTE mc_rfu3[0x100 - 0x22]; /* 0x22 Pad structure to 256 bytes (0x100) */ - -} SXMODULE; - -/* SXMODULE.mc_type definitions... */ -#define FOUR_PORTS (BYTE)4 -#define EIGHT_PORTS (BYTE)8 - -/* SXMODULE.mc_chip definitions... */ -#define CHIP_MASK 0xF0 -#define TA (BYTE)0 -#define TA4 (TA | FOUR_PORTS) -#define TA8 (TA | EIGHT_PORTS) -#define TA4_ASIC (BYTE)0x0A -#define TA8_ASIC (BYTE)0x0B -#define MTA_CD1400 (BYTE)0x28 -#define SXDC (BYTE)0x48 - -/* SXMODULE.mc_mods definitions... */ -#define MOD_RS232DB25 0x00 /* RS232 DB25 (socket/plug) */ -#define MOD_RS232RJ45 0x01 /* RS232 RJ45 (shielded/opto-isolated) */ -#define MOD_RESERVED_2 0x02 /* Reserved (RS485) */ -#define MOD_RS422DB25 0x03 /* RS422 DB25 Socket */ -#define MOD_RESERVED_4 0x04 /* Reserved */ -#define MOD_PARALLEL 0x05 /* Parallel */ -#define MOD_RESERVED_6 0x06 /* Reserved (RS423) */ -#define MOD_RESERVED_7 0x07 /* Reserved */ -#define MOD_2_RS232DB25 0x08 /* Rev 2.0 RS232 DB25 (socket/plug) */ -#define MOD_2_RS232RJ45 0x09 /* Rev 2.0 RS232 RJ45 */ -#define MOD_RESERVED_A 0x0A /* Rev 2.0 Reserved */ -#define MOD_2_RS422DB25 0x0B /* Rev 2.0 RS422 DB25 */ -#define MOD_RESERVED_C 0x0C /* Rev 2.0 Reserved */ -#define MOD_2_PARALLEL 0x0D /* Rev 2.0 Parallel */ -#define MOD_RESERVED_E 0x0E /* Rev 2.0 Reserved */ -#define MOD_BLANK 0x0F /* Blank Panel */ - -/***************************************************************************** -******************************** ******************************* -******************************** SXCHANNEL ******************************* -******************************** ******************************* -*****************************************************************************/ - -#define TX_BUFF_OFFSET 0x60 /* Transmit buffer offset in channel structure */ -#define BUFF_POINTER(a) (((a)+TX_BUFF_OFFSET)|0x8000) -#define UNBUFF_POINTER(a) (jet_channel*)(((a)&~0x8000)-TX_BUFF_OFFSET) -#define BUFFER_SIZE 256 -#define HIGH_WATER ((BUFFER_SIZE / 4) * 3) -#define LOW_WATER (BUFFER_SIZE / 4) - -typedef struct _SXCHANNEL -{ - WORD next_item; /* 0x00 Offset from window base of next channels hi_txbuf (ORred with 0x8000) */ - WORD addr_uart; /* 0x02 INTERNAL pointer to uart address. Includes FASTPATH bit */ - WORD module; /* 0x04 Offset from window base of parent SXMODULE structure */ - BYTE type; /* 0x06 Chip type / number of ports (copy of mc_chip) */ - BYTE chan_number; /* 0x07 Channel number on the TA/MTA/SXDC */ - WORD xc_status; /* 0x08 Flow control and I/O status */ - BYTE hi_rxipos; /* 0x0A Receive buffer input index */ - BYTE hi_rxopos; /* 0x0B Receive buffer output index */ - BYTE hi_txopos; /* 0x0C Transmit buffer output index */ - BYTE hi_txipos; /* 0x0D Transmit buffer input index */ - BYTE hi_hstat; /* 0x0E Command register */ - BYTE dtr_bit; /* 0x0F INTERNAL DTR control byte (TA only) */ - BYTE txon; /* 0x10 INTERNAL copy of hi_txon */ - BYTE txoff; /* 0x11 INTERNAL copy of hi_txoff */ - BYTE rxon; /* 0x12 INTERNAL copy of hi_rxon */ - BYTE rxoff; /* 0x13 INTERNAL copy of hi_rxoff */ - BYTE hi_mr1; /* 0x14 Mode Register 1 (databits,parity,RTS rx flow)*/ - BYTE hi_mr2; /* 0x15 Mode Register 2 (stopbits,local,CTS tx flow)*/ - BYTE hi_csr; /* 0x16 Clock Select Register (baud rate) */ - BYTE hi_op; /* 0x17 Modem Output Signal */ - BYTE hi_ip; /* 0x18 Modem Input Signal */ - BYTE hi_state; /* 0x19 Channel status */ - BYTE hi_prtcl; /* 0x1A Channel protocol (flow control) */ - BYTE hi_txon; /* 0x1B Transmit XON character */ - BYTE hi_txoff; /* 0x1C Transmit XOFF character */ - BYTE hi_rxon; /* 0x1D Receive XON character */ - BYTE hi_rxoff; /* 0x1E Receive XOFF character */ - BYTE close_prev; /* 0x1F INTERNAL channel previously closed flag */ - BYTE hi_break; /* 0x20 Break and error control */ - BYTE break_state; /* 0x21 INTERNAL copy of hi_break */ - BYTE hi_mask; /* 0x22 Mask for received data */ - BYTE mask; /* 0x23 INTERNAL copy of hi_mask */ - BYTE mod_type; /* 0x24 MTA/SXDC hardware module type */ - BYTE ccr_state; /* 0x25 INTERNAL MTA/SXDC state of CCR register */ - BYTE ip_mask; /* 0x26 Input handshake mask */ - BYTE hi_parallel; /* 0x27 Parallel port flag */ - BYTE par_error; /* 0x28 Error code for parallel loopback test */ - BYTE any_sent; /* 0x29 INTERNAL data sent flag */ - BYTE asic_txfifo_size; /* 0x2A INTERNAL SXDC transmit FIFO size */ - BYTE rfu1[2]; /* 0x2B Reserved */ - BYTE csr; /* 0x2D INTERNAL copy of hi_csr */ -#ifdef DOWNLOAD - PCHAN nextp; /* 0x2E Offset from window base of next channel structure */ -#else - WORD nextp; /* 0x2E Define as WORD if not compiling into download */ -#endif - BYTE prtcl; /* 0x30 INTERNAL copy of hi_prtcl */ - BYTE mr1; /* 0x31 INTERNAL copy of hi_mr1 */ - BYTE mr2; /* 0x32 INTERNAL copy of hi_mr2 */ - BYTE hi_txbaud; /* 0x33 Extended transmit baud rate (SXDC only if((hi_csr&0x0F)==0x0F) */ - BYTE hi_rxbaud; /* 0x34 Extended receive baud rate (SXDC only if((hi_csr&0xF0)==0xF0) */ - BYTE txbreak_state; /* 0x35 INTERNAL MTA/SXDC transmit break state */ - BYTE txbaud; /* 0x36 INTERNAL copy of hi_txbaud */ - BYTE rxbaud; /* 0x37 INTERNAL copy of hi_rxbaud */ - WORD err_framing; /* 0x38 Count of receive framing errors */ - WORD err_parity; /* 0x3A Count of receive parity errors */ - WORD err_overrun; /* 0x3C Count of receive overrun errors */ - WORD err_overflow; /* 0x3E Count of receive buffer overflow errors */ - BYTE rfu2[TX_BUFF_OFFSET - 0x40]; /* 0x40 Reserved until hi_txbuf */ - BYTE hi_txbuf[BUFFER_SIZE]; /* 0x060 Transmit buffer */ - BYTE hi_rxbuf[BUFFER_SIZE]; /* 0x160 Receive buffer */ - BYTE rfu3[0x300 - 0x260]; /* 0x260 Reserved until 768 bytes (0x300) */ - -} SXCHANNEL; - -/* SXCHANNEL.addr_uart definitions... */ -#define FASTPATH 0x1000 /* Set to indicate fast rx/tx processing (TA only) */ - -/* SXCHANNEL.xc_status definitions... */ -#define X_TANY 0x0001 /* XON is any character (TA only) */ -#define X_TION 0x0001 /* Tx interrupts on (MTA only) */ -#define X_TXEN 0x0002 /* Tx XON/XOFF enabled (TA only) */ -#define X_RTSEN 0x0002 /* RTS FLOW enabled (MTA only) */ -#define X_TXRC 0x0004 /* XOFF received (TA only) */ -#define X_RTSLOW 0x0004 /* RTS dropped (MTA only) */ -#define X_RXEN 0x0008 /* Rx XON/XOFF enabled */ -#define X_ANYXO 0x0010 /* XOFF pending/sent or RTS dropped */ -#define X_RXSE 0x0020 /* Rx XOFF sent */ -#define X_NPEND 0x0040 /* Rx XON pending or XOFF pending */ -#define X_FPEND 0x0080 /* Rx XOFF pending */ -#define C_CRSE 0x0100 /* Carriage return sent (TA only) */ -#define C_TEMR 0x0100 /* Tx empty requested (MTA only) */ -#define C_TEMA 0x0200 /* Tx empty acked (MTA only) */ -#define C_ANYP 0x0200 /* Any protocol bar tx XON/XOFF (TA only) */ -#define C_EN 0x0400 /* Cooking enabled (on MTA means port is also || */ -#define C_HIGH 0x0800 /* Buffer previously hit high water */ -#define C_CTSEN 0x1000 /* CTS automatic flow-control enabled */ -#define C_DCDEN 0x2000 /* DCD/DTR checking enabled */ -#define C_BREAK 0x4000 /* Break detected */ -#define C_RTSEN 0x8000 /* RTS automatic flow control enabled (MTA only) */ -#define C_PARITY 0x8000 /* Parity checking enabled (TA only) */ - -/* SXCHANNEL.hi_hstat definitions... */ -#define HS_IDLE_OPEN 0x00 /* Channel open state */ -#define HS_LOPEN 0x02 /* Local open command (no modem monitoring) */ -#define HS_MOPEN 0x04 /* Modem open command (wait for DCD signal) */ -#define HS_IDLE_MPEND 0x06 /* Waiting for DCD signal state */ -#define HS_CONFIG 0x08 /* Configuration command */ -#define HS_CLOSE 0x0A /* Close command */ -#define HS_START 0x0C /* Start transmit break command */ -#define HS_STOP 0x0E /* Stop transmit break command */ -#define HS_IDLE_CLOSED 0x10 /* Closed channel state */ -#define HS_IDLE_BREAK 0x12 /* Transmit break state */ -#define HS_FORCE_CLOSED 0x14 /* Force close command */ -#define HS_RESUME 0x16 /* Clear pending XOFF command */ -#define HS_WFLUSH 0x18 /* Flush transmit buffer command */ -#define HS_RFLUSH 0x1A /* Flush receive buffer command */ -#define HS_SUSPEND 0x1C /* Suspend output command (like XOFF received) */ -#define PARALLEL 0x1E /* Parallel port loopback test command (Diagnostics Only) */ -#define ENABLE_RX_INTS 0x20 /* Enable receive interrupts command (Diagnostics Only) */ -#define ENABLE_TX_INTS 0x22 /* Enable transmit interrupts command (Diagnostics Only) */ -#define ENABLE_MDM_INTS 0x24 /* Enable modem interrupts command (Diagnostics Only) */ -#define DISABLE_INTS 0x26 /* Disable interrupts command (Diagnostics Only) */ - -/* SXCHANNEL.hi_mr1 definitions... */ -#define MR1_BITS 0x03 /* Data bits mask */ -#define MR1_5_BITS 0x00 /* 5 data bits */ -#define MR1_6_BITS 0x01 /* 6 data bits */ -#define MR1_7_BITS 0x02 /* 7 data bits */ -#define MR1_8_BITS 0x03 /* 8 data bits */ -#define MR1_PARITY 0x1C /* Parity mask */ -#define MR1_ODD 0x04 /* Odd parity */ -#define MR1_EVEN 0x00 /* Even parity */ -#define MR1_WITH 0x00 /* Parity enabled */ -#define MR1_FORCE 0x08 /* Force parity */ -#define MR1_NONE 0x10 /* No parity */ -#define MR1_NOPARITY MR1_NONE /* No parity */ -#define MR1_ODDPARITY (MR1_WITH|MR1_ODD) /* Odd parity */ -#define MR1_EVENPARITY (MR1_WITH|MR1_EVEN) /* Even parity */ -#define MR1_MARKPARITY (MR1_FORCE|MR1_ODD) /* Mark parity */ -#define MR1_SPACEPARITY (MR1_FORCE|MR1_EVEN) /* Space parity */ -#define MR1_RTS_RXFLOW 0x80 /* RTS receive flow control */ - -/* SXCHANNEL.hi_mr2 definitions... */ -#define MR2_STOP 0x0F /* Stop bits mask */ -#define MR2_1_STOP 0x07 /* 1 stop bit */ -#define MR2_2_STOP 0x0F /* 2 stop bits */ -#define MR2_CTS_TXFLOW 0x10 /* CTS transmit flow control */ -#define MR2_RTS_TOGGLE 0x20 /* RTS toggle on transmit */ -#define MR2_NORMAL 0x00 /* Normal mode */ -#define MR2_AUTO 0x40 /* Auto-echo mode (TA only) */ -#define MR2_LOCAL 0x80 /* Local echo mode */ -#define MR2_REMOTE 0xC0 /* Remote echo mode (TA only) */ - -/* SXCHANNEL.hi_csr definitions... */ -#define CSR_75 0x0 /* 75 baud */ -#define CSR_110 0x1 /* 110 baud (TA), 115200 (MTA/SXDC) */ -#define CSR_38400 0x2 /* 38400 baud */ -#define CSR_150 0x3 /* 150 baud */ -#define CSR_300 0x4 /* 300 baud */ -#define CSR_600 0x5 /* 600 baud */ -#define CSR_1200 0x6 /* 1200 baud */ -#define CSR_2000 0x7 /* 2000 baud */ -#define CSR_2400 0x8 /* 2400 baud */ -#define CSR_4800 0x9 /* 4800 baud */ -#define CSR_1800 0xA /* 1800 baud */ -#define CSR_9600 0xB /* 9600 baud */ -#define CSR_19200 0xC /* 19200 baud */ -#define CSR_57600 0xD /* 57600 baud */ -#define CSR_EXTBAUD 0xF /* Extended baud rate (hi_txbaud/hi_rxbaud) */ - -/* SXCHANNEL.hi_op definitions... */ -#define OP_RTS 0x01 /* RTS modem output signal */ -#define OP_DTR 0x02 /* DTR modem output signal */ - -/* SXCHANNEL.hi_ip definitions... */ -#define IP_CTS 0x02 /* CTS modem input signal */ -#define IP_DCD 0x04 /* DCD modem input signal */ -#define IP_DSR 0x20 /* DTR modem input signal */ -#define IP_RI 0x40 /* RI modem input signal */ - -/* SXCHANNEL.hi_state definitions... */ -#define ST_BREAK 0x01 /* Break received (clear with config) */ -#define ST_DCD 0x02 /* DCD signal changed state */ - -/* SXCHANNEL.hi_prtcl definitions... */ -#define SP_TANY 0x01 /* Transmit XON/XANY (if SP_TXEN enabled) */ -#define SP_TXEN 0x02 /* Transmit XON/XOFF flow control */ -#define SP_CEN 0x04 /* Cooking enabled */ -#define SP_RXEN 0x08 /* Rx XON/XOFF enabled */ -#define SP_DCEN 0x20 /* DCD / DTR check */ -#define SP_DTR_RXFLOW 0x40 /* DTR receive flow control */ -#define SP_PAEN 0x80 /* Parity checking enabled */ - -/* SXCHANNEL.hi_break definitions... */ -#define BR_IGN 0x01 /* Ignore any received breaks */ -#define BR_INT 0x02 /* Interrupt on received break */ -#define BR_PARMRK 0x04 /* Enable parmrk parity error processing */ -#define BR_PARIGN 0x08 /* Ignore chars with parity errors */ -#define BR_ERRINT 0x80 /* Treat parity/framing/overrun errors as exceptions */ - -/* SXCHANNEL.par_error definitions.. */ -#define DIAG_IRQ_RX 0x01 /* Indicate serial receive interrupt (diags only) */ -#define DIAG_IRQ_TX 0x02 /* Indicate serial transmit interrupt (diags only) */ -#define DIAG_IRQ_MD 0x04 /* Indicate serial modem interrupt (diags only) */ - -/* SXCHANNEL.hi_txbaud/hi_rxbaud definitions... (SXDC only) */ -#define BAUD_75 0x00 /* 75 baud */ -#define BAUD_115200 0x01 /* 115200 baud */ -#define BAUD_38400 0x02 /* 38400 baud */ -#define BAUD_150 0x03 /* 150 baud */ -#define BAUD_300 0x04 /* 300 baud */ -#define BAUD_600 0x05 /* 600 baud */ -#define BAUD_1200 0x06 /* 1200 baud */ -#define BAUD_2000 0x07 /* 2000 baud */ -#define BAUD_2400 0x08 /* 2400 baud */ -#define BAUD_4800 0x09 /* 4800 baud */ -#define BAUD_1800 0x0A /* 1800 baud */ -#define BAUD_9600 0x0B /* 9600 baud */ -#define BAUD_19200 0x0C /* 19200 baud */ -#define BAUD_57600 0x0D /* 57600 baud */ -#define BAUD_230400 0x0E /* 230400 baud */ -#define BAUD_460800 0x0F /* 460800 baud */ -#define BAUD_921600 0x10 /* 921600 baud */ -#define BAUD_50 0x11 /* 50 baud */ -#define BAUD_110 0x12 /* 110 baud */ -#define BAUD_134_5 0x13 /* 134.5 baud */ -#define BAUD_200 0x14 /* 200 baud */ -#define BAUD_7200 0x15 /* 7200 baud */ -#define BAUD_56000 0x16 /* 56000 baud */ -#define BAUD_64000 0x17 /* 64000 baud */ -#define BAUD_76800 0x18 /* 76800 baud */ -#define BAUD_128000 0x19 /* 128000 baud */ -#define BAUD_150000 0x1A /* 150000 baud */ -#define BAUD_14400 0x1B /* 14400 baud */ -#define BAUD_256000 0x1C /* 256000 baud */ -#define BAUD_28800 0x1D /* 28800 baud */ - -/* SXCHANNEL.txbreak_state definiions... */ -#define TXBREAK_OFF 0 /* Not sending break */ -#define TXBREAK_START 1 /* Begin sending break */ -#define TXBREAK_START1 2 /* Begin sending break, part 1 */ -#define TXBREAK_ON 3 /* Sending break */ -#define TXBREAK_STOP 4 /* Stop sending break */ -#define TXBREAK_STOP1 5 /* Stop sending break, part 1 */ - -#endif /* _sxwindow_h */ - -/* End of SXWINDOW.H */ - diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c deleted file mode 100644 index 96838640f575..000000000000 --- a/drivers/char/vme_scc.c +++ /dev/null @@ -1,1145 +0,0 @@ -/* - * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports - * implementation. - * Copyright 1999 Richard Hirst - * - * Based on atari_SCC.c which was - * Copyright 1994-95 Roman Hodek - * Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_MVME147_SCC -#include -#endif -#ifdef CONFIG_MVME162_SCC -#include -#endif -#ifdef CONFIG_BVME6000_SCC -#include -#endif - -#include -#include "scc.h" - - -#define CHANNEL_A 0 -#define CHANNEL_B 1 - -#define SCC_MINOR_BASE 64 - -/* Shadows for all SCC write registers */ -static unsigned char scc_shadow[2][16]; - -/* Location to access for SCC register access delay */ -static volatile unsigned char *scc_del = NULL; - -/* To keep track of STATUS_REG state for detection of Ext/Status int source */ -static unsigned char scc_last_status_reg[2]; - -/***************************** Prototypes *****************************/ - -/* Function prototypes */ -static void scc_disable_tx_interrupts(void * ptr); -static void scc_enable_tx_interrupts(void * ptr); -static void scc_disable_rx_interrupts(void * ptr); -static void scc_enable_rx_interrupts(void * ptr); -static int scc_carrier_raised(struct tty_port *port); -static void scc_shutdown_port(void * ptr); -static int scc_set_real_termios(void *ptr); -static void scc_hungup(void *ptr); -static void scc_close(void *ptr); -static int scc_chars_in_buffer(void * ptr); -static int scc_open(struct tty_struct * tty, struct file * filp); -static int scc_ioctl(struct tty_struct * tty, - unsigned int cmd, unsigned long arg); -static void scc_throttle(struct tty_struct *tty); -static void scc_unthrottle(struct tty_struct *tty); -static irqreturn_t scc_tx_int(int irq, void *data); -static irqreturn_t scc_rx_int(int irq, void *data); -static irqreturn_t scc_stat_int(int irq, void *data); -static irqreturn_t scc_spcond_int(int irq, void *data); -static void scc_setsignals(struct scc_port *port, int dtr, int rts); -static int scc_break_ctl(struct tty_struct *tty, int break_state); - -static struct tty_driver *scc_driver; - -static struct scc_port scc_ports[2]; - -/*--------------------------------------------------------------------------- - * Interface from generic_serial.c back here - *--------------------------------------------------------------------------*/ - -static struct real_driver scc_real_driver = { - scc_disable_tx_interrupts, - scc_enable_tx_interrupts, - scc_disable_rx_interrupts, - scc_enable_rx_interrupts, - scc_shutdown_port, - scc_set_real_termios, - scc_chars_in_buffer, - scc_close, - scc_hungup, - NULL -}; - - -static const struct tty_operations scc_ops = { - .open = scc_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = scc_ioctl, - .throttle = scc_throttle, - .unthrottle = scc_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, - .break_ctl = scc_break_ctl, -}; - -static const struct tty_port_operations scc_port_ops = { - .carrier_raised = scc_carrier_raised, -}; - -/*---------------------------------------------------------------------------- - * vme_scc_init() and support functions - *---------------------------------------------------------------------------*/ - -static int __init scc_init_drivers(void) -{ - int error; - - scc_driver = alloc_tty_driver(2); - if (!scc_driver) - return -ENOMEM; - scc_driver->owner = THIS_MODULE; - scc_driver->driver_name = "scc"; - scc_driver->name = "ttyS"; - scc_driver->major = TTY_MAJOR; - scc_driver->minor_start = SCC_MINOR_BASE; - scc_driver->type = TTY_DRIVER_TYPE_SERIAL; - scc_driver->subtype = SERIAL_TYPE_NORMAL; - scc_driver->init_termios = tty_std_termios; - scc_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - scc_driver->init_termios.c_ispeed = 9600; - scc_driver->init_termios.c_ospeed = 9600; - scc_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(scc_driver, &scc_ops); - - if ((error = tty_register_driver(scc_driver))) { - printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n", - error); - put_tty_driver(scc_driver); - return 1; - } - - return 0; -} - - -/* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1). - */ - -static void __init scc_init_portstructs(void) -{ - struct scc_port *port; - int i; - - for (i = 0; i < 2; i++) { - port = scc_ports + i; - tty_port_init(&port->gs.port); - port->gs.port.ops = &scc_port_ops; - port->gs.magic = SCC_MAGIC; - port->gs.close_delay = HZ/2; - port->gs.closing_wait = 30 * HZ; - port->gs.rd = &scc_real_driver; -#ifdef NEW_WRITE_LOCKING - port->gs.port_write_mutex = MUTEX; -#endif - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); - } -} - - -#ifdef CONFIG_MVME147_SCC -static int __init mvme147_scc_init(void) -{ - struct scc_port *port; - int error; - - printk(KERN_INFO "SCC: MVME147 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR; - port->datap = port->ctrlp + 1; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR; - port->datap = port->ctrlp + 1; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Ensure interrupts are enabled in the PCC chip */ - m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB; - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail_free_b_rx: - free_irq(MVME147_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(MVME147_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(MVME147_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(MVME147_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(MVME147_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(MVME147_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(MVME147_IRQ_SCCA_TX, port); -fail: - return error; -} -#endif - - -#ifdef CONFIG_MVME162_SCC -static int __init mvme162_scc_init(void) -{ - struct scc_port *port; - int error; - - if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA)) - return (-ENODEV); - - printk(KERN_INFO "SCC: MVME162 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR; - port->datap = port->ctrlp + 2; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR; - port->datap = port->ctrlp + 2; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); /* Either channel will do */ - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Ensure interrupts are enabled in the MC2 chip */ - *(volatile char *)0xfff4201d = 0x14; - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail_free_b_rx: - free_irq(MVME162_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(MVME162_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(MVME162_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(MVME162_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(MVME162_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(MVME162_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(MVME162_IRQ_SCCA_TX, port); -fail: - return error; -} -#endif - - -#ifdef CONFIG_BVME6000_SCC -static int __init bvme6000_scc_init(void) -{ - struct scc_port *port; - int error; - - printk(KERN_INFO "SCC: BVME6000 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR; - port->datap = port->ctrlp + 4; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR; - port->datap = port->ctrlp + 4; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); /* Either channel will do */ - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail: - free_irq(BVME_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(BVME_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(BVME_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(BVME_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(BVME_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(BVME_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(BVME_IRQ_SCCB_SPCOND, port); -fail_free_b_rx: - return error; -} -#endif - - -static int __init vme_scc_init(void) -{ - int res = -ENODEV; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - res = mvme147_scc_init(); -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - res = mvme162_scc_init(); -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - res = bvme6000_scc_init(); -#endif - return res; -} - -module_init(vme_scc_init); - - -/*--------------------------------------------------------------------------- - * Interrupt handlers - *--------------------------------------------------------------------------*/ - -static irqreturn_t scc_rx_int(int irq, void *data) -{ - unsigned char ch; - struct scc_port *port = data; - struct tty_struct *tty = port->gs.port.tty; - SCC_ACCESS_INIT(port); - - ch = SCCread_NB(RX_DATA_REG); - if (!tty) { - printk(KERN_WARNING "scc_rx_int with NULL tty!\n"); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - tty_insert_flip_char(tty, ch, 0); - - /* Check if another character is already ready; in that case, the - * spcond_int() function must be used, because this character may have an - * error condition that isn't signalled by the interrupt vector used! - */ - if (SCCread(INT_PENDING_REG) & - (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) { - scc_spcond_int (irq, data); - return IRQ_HANDLED; - } - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_spcond_int(int irq, void *data) -{ - struct scc_port *port = data; - struct tty_struct *tty = port->gs.port.tty; - unsigned char stat, ch, err; - int int_pending_mask = port->channel == CHANNEL_A ? - IPR_A_RX : IPR_B_RX; - SCC_ACCESS_INIT(port); - - if (!tty) { - printk(KERN_WARNING "scc_spcond_int with NULL tty!\n"); - SCCwrite(COMMAND_REG, CR_ERROR_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - do { - stat = SCCread(SPCOND_STATUS_REG); - ch = SCCread_NB(RX_DATA_REG); - - if (stat & SCSR_RX_OVERRUN) - err = TTY_OVERRUN; - else if (stat & SCSR_PARITY_ERR) - err = TTY_PARITY; - else if (stat & SCSR_CRC_FRAME_ERR) - err = TTY_FRAME; - else - err = 0; - - tty_insert_flip_char(tty, ch, err); - - /* ++TeSche: *All* errors have to be cleared manually, - * else the condition persists for the next chars - */ - if (err) - SCCwrite(COMMAND_REG, CR_ERROR_RESET); - - } while(SCCread(INT_PENDING_REG) & int_pending_mask); - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_tx_int(int irq, void *data) -{ - struct scc_port *port = data; - SCC_ACCESS_INIT(port); - - if (!port->gs.port.tty) { - printk(KERN_WARNING "scc_tx_int with NULL tty!\n"); - SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) { - if (port->x_char) { - SCCwrite(TX_DATA_REG, port->x_char); - port->x_char = 0; - } - else if ((port->gs.xmit_cnt <= 0) || - port->gs.port.tty->stopped || - port->gs.port.tty->hw_stopped) - break; - else { - SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]); - port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1); - if (--port->gs.xmit_cnt <= 0) - break; - } - } - if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped || - port->gs.port.tty->hw_stopped) { - /* disable tx interrupts */ - SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */ - port->gs.port.flags &= ~GS_TX_INTEN; - } - if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars) - tty_wakeup(port->gs.port.tty); - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_stat_int(int irq, void *data) -{ - struct scc_port *port = data; - unsigned channel = port->channel; - unsigned char last_sr, sr, changed; - SCC_ACCESS_INIT(port); - - last_sr = scc_last_status_reg[channel]; - sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG); - changed = last_sr ^ sr; - - if (changed & SR_DCD) { - port->c_dcd = !!(sr & SR_DCD); - if (!(port->gs.port.flags & ASYNC_CHECK_CD)) - ; /* Don't report DCD changes */ - else if (port->c_dcd) { - wake_up_interruptible(&port->gs.port.open_wait); - } - else { - if (port->gs.port.tty) - tty_hangup (port->gs.port.tty); - } - } - SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; -} - - -/*--------------------------------------------------------------------------- - * generic_serial.c callback funtions - *--------------------------------------------------------------------------*/ - -static void scc_disable_tx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - port->gs.port.flags &= ~GS_TX_INTEN; - local_irq_restore(flags); -} - - -static void scc_enable_tx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB); - /* restart the transmitter */ - scc_tx_int (0, port); - local_irq_restore(flags); -} - - -static void scc_disable_rx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, - ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0); - local_irq_restore(flags); -} - - -static void scc_enable_rx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, 0xff, - IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL); - local_irq_restore(flags); -} - - -static int scc_carrier_raised(struct tty_port *port) -{ - struct scc_port *sc = container_of(port, struct scc_port, gs.port); - unsigned channel = sc->channel; - - return !!(scc_last_status_reg[channel] & SR_DCD); -} - - -static void scc_shutdown_port(void *ptr) -{ - struct scc_port *port = ptr; - - port->gs.port.flags &= ~ GS_ACTIVE; - if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { - scc_setsignals (port, 0, 0); - } -} - - -static int scc_set_real_termios (void *ptr) -{ - /* the SCC has char sizes 5,7,6,8 in that order! */ - static int chsize_map[4] = { 0, 2, 1, 3 }; - unsigned cflag, baud, chsize, channel, brgval = 0; - unsigned long flags; - struct scc_port *port = ptr; - SCC_ACCESS_INIT(port); - - if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; - - channel = port->channel; - - if (channel == CHANNEL_A) - return 0; /* Settings controlled by boot PROM */ - - cflag = port->gs.port.tty->termios->c_cflag; - baud = port->gs.baud; - chsize = (cflag & CSIZE) >> 4; - - if (baud == 0) { - /* speed == 0 -> drop DTR */ - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_DTR, 0); - local_irq_restore(flags); - return 0; - } - else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) || - (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) || - (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) { - printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud); - return 0; - } - - if (cflag & CLOCAL) - port->gs.port.flags &= ~ASYNC_CHECK_CD; - else - port->gs.port.flags |= ASYNC_CHECK_CD; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2; -#endif - /* Now we have all parameters and can go to set them: */ - local_irq_save(flags); - - /* receiver's character size and auto-enables */ - SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE), - (chsize_map[chsize] << 6) | - ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0)); - /* parity and stop bits (both, Tx and Rx), clock mode never changes */ - SCCmod (AUX1_CTRL_REG, - ~(A1CR_PARITY_MASK | A1CR_MODE_MASK), - ((cflag & PARENB - ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN) - : A1CR_PARITY_NONE) - | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1))); - /* sender's character size, set DTR for valid baud rate */ - SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR); - /* clock sources never change */ - /* disable BRG before changing the value */ - SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0); - /* BRG value */ - SCCwrite(TIMER_LOW_REG, brgval & 0xff); - SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff); - /* BRG enable, and clock source never changes */ - SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB); - - local_irq_restore(flags); - - return 0; -} - - -static int scc_chars_in_buffer (void *ptr) -{ - struct scc_port *port = ptr; - SCC_ACCESS_INIT(port); - - return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0 : 1; -} - - -/* Comment taken from sx.c (2.4.0): - I haven't the foggiest why the decrement use count has to happen - here. The whole linux serial drivers stuff needs to be redesigned. - My guess is that this is a hack to minimize the impact of a bug - elsewhere. Thinking about it some more. (try it sometime) Try - running minicom on a serial port that is driven by a modularized - driver. Have the modem hangup. Then remove the driver module. Then - exit minicom. I expect an "oops". -- REW */ - -static void scc_hungup(void *ptr) -{ - scc_disable_tx_interrupts(ptr); - scc_disable_rx_interrupts(ptr); -} - - -static void scc_close(void *ptr) -{ - scc_disable_tx_interrupts(ptr); - scc_disable_rx_interrupts(ptr); -} - - -/*--------------------------------------------------------------------------- - * Internal support functions - *--------------------------------------------------------------------------*/ - -static void scc_setsignals(struct scc_port *port, int dtr, int rts) -{ - unsigned long flags; - unsigned char t; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - t = SCCread(TX_CTRL_REG); - if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR); - if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS); - SCCwrite(TX_CTRL_REG, t); - local_irq_restore(flags); -} - - -static void scc_send_xchar(struct tty_struct *tty, char ch) -{ - struct scc_port *port = tty->driver_data; - - port->x_char = ch; - if (ch) - scc_enable_tx_interrupts(port); -} - - -/*--------------------------------------------------------------------------- - * Driver entrypoints referenced from above - *--------------------------------------------------------------------------*/ - -static int scc_open (struct tty_struct * tty, struct file * filp) -{ - int line = tty->index; - int retval; - struct scc_port *port = &scc_ports[line]; - int i, channel = port->channel; - unsigned long flags; - SCC_ACCESS_INIT(port); -#if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC) - static const struct { - unsigned reg, val; - } mvme_init_tab[] = { - /* Values for MVME162 and MVME147 */ - /* no parity, 1 stop bit, async, 1:16 */ - { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, - /* parity error is special cond, ints disabled, no DMA */ - { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, - /* Rx 8 bits/char, no auto enable, Rx off */ - { RX_CTRL_REG, RCR_CHSIZE_8 }, - /* DTR off, Tx 8 bits/char, RTS off, Tx off */ - { TX_CTRL_REG, TCR_CHSIZE_8 }, - /* special features off */ - { AUX2_CTRL_REG, 0 }, - { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG }, - { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK }, - /* Start Rx */ - { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, - /* Start Tx */ - { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, - /* Ext/Stat ints: DCD only */ - { INT_CTRL_REG, ICR_ENAB_DCD_INT }, - /* Reset Ext/Stat ints */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - /* ...again */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - }; -#endif -#if defined(CONFIG_BVME6000_SCC) - static const struct { - unsigned reg, val; - } bvme_init_tab[] = { - /* Values for BVME6000 */ - /* no parity, 1 stop bit, async, 1:16 */ - { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, - /* parity error is special cond, ints disabled, no DMA */ - { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, - /* Rx 8 bits/char, no auto enable, Rx off */ - { RX_CTRL_REG, RCR_CHSIZE_8 }, - /* DTR off, Tx 8 bits/char, RTS off, Tx off */ - { TX_CTRL_REG, TCR_CHSIZE_8 }, - /* special features off */ - { AUX2_CTRL_REG, 0 }, - { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG }, - { DPLL_CTRL_REG, DCR_BRG_ENAB }, - /* Start Rx */ - { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, - /* Start Tx */ - { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, - /* Ext/Stat ints: DCD only */ - { INT_CTRL_REG, ICR_ENAB_DCD_INT }, - /* Reset Ext/Stat ints */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - /* ...again */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - }; -#endif - if (!(port->gs.port.flags & ASYNC_INITIALIZED)) { - local_irq_save(flags); -#if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC) - if (MACH_IS_MVME147 || MACH_IS_MVME16x) { - for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i) - SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val); - } -#endif -#if defined(CONFIG_BVME6000_SCC) - if (MACH_IS_BVME6000) { - for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i) - SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val); - } -#endif - - /* remember status register for detection of DCD and CTS changes */ - scc_last_status_reg[channel] = SCCread(STATUS_REG); - - port->c_dcd = 0; /* Prevent initial 1->0 interrupt */ - scc_setsignals (port, 1,1); - local_irq_restore(flags); - } - - tty->driver_data = port; - port->gs.port.tty = tty; - port->gs.port.count++; - retval = gs_init_port(&port->gs); - if (retval) { - port->gs.port.count--; - return retval; - } - port->gs.port.flags |= GS_ACTIVE; - retval = gs_block_til_ready(port, filp); - - if (retval) { - port->gs.port.count--; - return retval; - } - - port->c_dcd = tty_port_carrier_raised(&port->gs.port); - - scc_enable_rx_interrupts(port); - - return 0; -} - - -static void scc_throttle (struct tty_struct * tty) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - if (tty->termios->c_cflag & CRTSCTS) { - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_RTS, 0); - local_irq_restore(flags); - } - if (I_IXOFF(tty)) - scc_send_xchar(tty, STOP_CHAR(tty)); -} - - -static void scc_unthrottle (struct tty_struct * tty) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - if (tty->termios->c_cflag & CRTSCTS) { - local_irq_save(flags); - SCCmod(TX_CTRL_REG, 0xff, TCR_RTS); - local_irq_restore(flags); - } - if (I_IXOFF(tty)) - scc_send_xchar(tty, START_CHAR(tty)); -} - - -static int scc_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; -} - - -static int scc_break_ctl(struct tty_struct *tty, int break_state) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK, - break_state ? TCR_SEND_BREAK : 0); - local_irq_restore(flags); - return 0; -} - - -/*--------------------------------------------------------------------------- - * Serial console stuff... - *--------------------------------------------------------------------------*/ - -#define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0) - -static void scc_ch_write (char ch) -{ - volatile char *p = NULL; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - p = (volatile char *)M147_SCC_A_ADDR; -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - p = (volatile char *)MVME_SCC_A_ADDR; -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - p = (volatile char *)BVME_SCC_A_ADDR; -#endif - - do { - scc_delay(); - } - while (!(*p & 4)); - scc_delay(); - *p = 8; - scc_delay(); - *p = ch; -} - -/* The console must be locked when we get here. */ - -static void scc_console_write (struct console *co, const char *str, unsigned count) -{ - unsigned long flags; - - local_irq_save(flags); - - while (count--) - { - if (*str == '\n') - scc_ch_write ('\r'); - scc_ch_write (*str++); - } - local_irq_restore(flags); -} - -static struct tty_driver *scc_console_device(struct console *c, int *index) -{ - *index = c->index; - return scc_driver; -} - -static struct console sercons = { - .name = "ttyS", - .write = scc_console_write, - .device = scc_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - - -static int __init vme_scc_console_init(void) -{ - if (vme_brdtype == VME_TYPE_MVME147 || - vme_brdtype == VME_TYPE_MVME162 || - vme_brdtype == VME_TYPE_MVME172 || - vme_brdtype == VME_TYPE_BVME4000 || - vme_brdtype == VME_TYPE_BVME6000) - register_console(&sercons); - return 0; -} -console_initcall(vme_scc_console_init); diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index fb1fc4e5a8cb..58e4a8e15a0e 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -43,6 +43,8 @@ if !STAGING_EXCLUDE_BUILD source "drivers/staging/tty/Kconfig" +source "drivers/staging/generic_serial/Kconfig" + source "drivers/staging/et131x/Kconfig" source "drivers/staging/slicoss/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index f498e345a01d..ff7372d25c91 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_STAGING) += staging.o obj-y += tty/ +obj-y += generic_serial/ obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_VIDEO_GO7007) += go7007/ diff --git a/drivers/staging/generic_serial/Kconfig b/drivers/staging/generic_serial/Kconfig new file mode 100644 index 000000000000..795daea37750 --- /dev/null +++ b/drivers/staging/generic_serial/Kconfig @@ -0,0 +1,45 @@ +config A2232 + tristate "Commodore A2232 serial support (EXPERIMENTAL)" + depends on EXPERIMENTAL && ZORRO && BROKEN + ---help--- + This option supports the 2232 7-port serial card shipped with the + Amiga 2000 and other Zorro-bus machines, dating from 1989. At + a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip + each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The + ports were connected with 8 pin DIN connectors on the card bracket, + for which 8 pin to DB25 adapters were supplied. The card also had + jumpers internally to toggle various pinning configurations. + + This driver can be built as a module; but then "generic_serial" + will also be built as a module. This has to be loaded before + "ser_a2232". If you want to do this, answer M here. + +config SX + tristate "Specialix SX (and SI) card support" + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN + help + This is a driver for the SX and SI multiport serial cards. + Please read the file for details. + + This driver can only be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called sx. If you want to do that, say M here. + +config RIO + tristate "Specialix RIO system support" + depends on SERIAL_NONSTANDARD && BROKEN + help + This is a driver for the Specialix RIO, a smart serial card which + drives an outboard box that can support up to 128 ports. Product + information is at . + There are both ISA and PCI versions. + +config RIO_OLDPCI + bool "Support really old RIO/PCI cards" + depends on RIO + help + Older RIO PCI cards need some initialization-time configuration to + determine the IRQ and some control addresses. If you have a RIO and + this doesn't seem to work, try setting this to Y. + + diff --git a/drivers/staging/generic_serial/Makefile b/drivers/staging/generic_serial/Makefile new file mode 100644 index 000000000000..ffc90c8b013c --- /dev/null +++ b/drivers/staging/generic_serial/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o +obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o +obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o +obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o +obj-$(CONFIG_SX) += sx.o generic_serial.o +obj-$(CONFIG_RIO) += rio/ generic_serial.o diff --git a/drivers/staging/generic_serial/TODO b/drivers/staging/generic_serial/TODO new file mode 100644 index 000000000000..88756453ac6c --- /dev/null +++ b/drivers/staging/generic_serial/TODO @@ -0,0 +1,6 @@ +These are a few tty/serial drivers that either do not build, +or work if they do build, or if they seem to work, are for obsolete +hardware, or are full of unfixable races and no one uses them anymore. + +If no one steps up to adopt any of these drivers, they will be removed +in the 2.6.41 release. diff --git a/drivers/staging/generic_serial/generic_serial.c b/drivers/staging/generic_serial/generic_serial.c new file mode 100644 index 000000000000..5954ee1dc953 --- /dev/null +++ b/drivers/staging/generic_serial/generic_serial.c @@ -0,0 +1,844 @@ +/* + * generic_serial.c + * + * Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl + * + * written for the SX serial driver. + * Contains the code that should be shared over all the serial drivers. + * + * Credit for the idea to do it this way might go to Alan Cox. + * + * + * Version 0.1 -- December, 1998. Initial version. + * Version 0.2 -- March, 1999. Some more routines. Bugfixes. Etc. + * Version 0.5 -- August, 1999. Some more fixes. Reformat for Linus. + * + * BitWizard is actively maintaining this file. We sometimes find + * that someone submitted changes to this file. We really appreciate + * your help, but please submit changes through us. We're doing our + * best to be responsive. -- REW + * */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEBUG + +static int gs_debug; + +#ifdef DEBUG +#define gs_dprintk(f, str...) if (gs_debug & f) printk (str) +#else +#define gs_dprintk(f, str...) /* nothing */ +#endif + +#define func_enter() gs_dprintk (GS_DEBUG_FLOW, "gs: enter %s\n", __func__) +#define func_exit() gs_dprintk (GS_DEBUG_FLOW, "gs: exit %s\n", __func__) + +#define RS_EVENT_WRITE_WAKEUP 1 + +module_param(gs_debug, int, 0644); + + +int gs_put_char(struct tty_struct * tty, unsigned char ch) +{ + struct gs_port *port; + + func_enter (); + + port = tty->driver_data; + + if (!port) return 0; + + if (! (port->port.flags & ASYNC_INITIALIZED)) return 0; + + /* Take a lock on the serial tranmit buffer! */ + mutex_lock(& port->port_write_mutex); + + if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { + /* Sorry, buffer is full, drop character. Update statistics???? -- REW */ + mutex_unlock(&port->port_write_mutex); + return 0; + } + + port->xmit_buf[port->xmit_head++] = ch; + port->xmit_head &= SERIAL_XMIT_SIZE - 1; + port->xmit_cnt++; /* Characters in buffer */ + + mutex_unlock(&port->port_write_mutex); + func_exit (); + return 1; +} + + +/* +> Problems to take into account are: +> -1- Interrupts that empty part of the buffer. +> -2- page faults on the access to userspace. +> -3- Other processes that are also trying to do a "write". +*/ + +int gs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + struct gs_port *port; + int c, total = 0; + int t; + + func_enter (); + + port = tty->driver_data; + + if (!port) return 0; + + if (! (port->port.flags & ASYNC_INITIALIZED)) + return 0; + + /* get exclusive "write" access to this port (problem 3) */ + /* This is not a spinlock because we can have a disk access (page + fault) in copy_from_user */ + mutex_lock(& port->port_write_mutex); + + while (1) { + + c = count; + + /* This is safe because we "OWN" the "head". Noone else can + change the "head": we own the port_write_mutex. */ + /* Don't overrun the end of the buffer */ + t = SERIAL_XMIT_SIZE - port->xmit_head; + if (t < c) c = t; + + /* This is safe because the xmit_cnt can only decrease. This + would increase "t", so we might copy too little chars. */ + /* Don't copy past the "head" of the buffer */ + t = SERIAL_XMIT_SIZE - 1 - port->xmit_cnt; + if (t < c) c = t; + + /* Can't copy more? break out! */ + if (c <= 0) break; + + memcpy (port->xmit_buf + port->xmit_head, buf, c); + + port -> xmit_cnt += c; + port -> xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE -1); + buf += c; + count -= c; + total += c; + } + mutex_unlock(& port->port_write_mutex); + + gs_dprintk (GS_DEBUG_WRITE, "write: interrupts are %s\n", + (port->port.flags & GS_TX_INTEN)?"enabled": "disabled"); + + if (port->xmit_cnt && + !tty->stopped && + !tty->hw_stopped && + !(port->port.flags & GS_TX_INTEN)) { + port->port.flags |= GS_TX_INTEN; + port->rd->enable_tx_interrupts (port); + } + func_exit (); + return total; +} + + + +int gs_write_room(struct tty_struct * tty) +{ + struct gs_port *port = tty->driver_data; + int ret; + + func_enter (); + ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; + if (ret < 0) + ret = 0; + func_exit (); + return ret; +} + + +int gs_chars_in_buffer(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + func_enter (); + + func_exit (); + return port->xmit_cnt; +} + + +static int gs_real_chars_in_buffer(struct tty_struct *tty) +{ + struct gs_port *port; + func_enter (); + + port = tty->driver_data; + + if (!port->rd) return 0; + if (!port->rd->chars_in_buffer) return 0; + + func_exit (); + return port->xmit_cnt + port->rd->chars_in_buffer (port); +} + + +static int gs_wait_tx_flushed (void * ptr, unsigned long timeout) +{ + struct gs_port *port = ptr; + unsigned long end_jiffies; + int jiffies_to_transmit, charsleft = 0, rv = 0; + int rcib; + + func_enter(); + + gs_dprintk (GS_DEBUG_FLUSH, "port=%p.\n", port); + if (port) { + gs_dprintk (GS_DEBUG_FLUSH, "xmit_cnt=%x, xmit_buf=%p, tty=%p.\n", + port->xmit_cnt, port->xmit_buf, port->port.tty); + } + + if (!port || port->xmit_cnt < 0 || !port->xmit_buf) { + gs_dprintk (GS_DEBUG_FLUSH, "ERROR: !port, !port->xmit_buf or prot->xmit_cnt < 0.\n"); + func_exit(); + return -EINVAL; /* This is an error which we don't know how to handle. */ + } + + rcib = gs_real_chars_in_buffer(port->port.tty); + + if(rcib <= 0) { + gs_dprintk (GS_DEBUG_FLUSH, "nothing to wait for.\n"); + func_exit(); + return rv; + } + /* stop trying: now + twice the time it would normally take + seconds */ + if (timeout == 0) timeout = MAX_SCHEDULE_TIMEOUT; + end_jiffies = jiffies; + if (timeout != MAX_SCHEDULE_TIMEOUT) + end_jiffies += port->baud?(2 * rcib * 10 * HZ / port->baud):0; + end_jiffies += timeout; + + gs_dprintk (GS_DEBUG_FLUSH, "now=%lx, end=%lx (%ld).\n", + jiffies, end_jiffies, end_jiffies-jiffies); + + /* the expression is actually jiffies < end_jiffies, but that won't + work around the wraparound. Tricky eh? */ + while ((charsleft = gs_real_chars_in_buffer (port->port.tty)) && + time_after (end_jiffies, jiffies)) { + /* Units check: + chars * (bits/char) * (jiffies /sec) / (bits/sec) = jiffies! + check! */ + + charsleft += 16; /* Allow 16 chars more to be transmitted ... */ + jiffies_to_transmit = port->baud?(1 + charsleft * 10 * HZ / port->baud):0; + /* ^^^ Round up.... */ + if (jiffies_to_transmit <= 0) jiffies_to_transmit = 1; + + gs_dprintk (GS_DEBUG_FLUSH, "Expect to finish in %d jiffies " + "(%d chars).\n", jiffies_to_transmit, charsleft); + + msleep_interruptible(jiffies_to_msecs(jiffies_to_transmit)); + if (signal_pending (current)) { + gs_dprintk (GS_DEBUG_FLUSH, "Signal pending. Bombing out: "); + rv = -EINTR; + break; + } + } + + gs_dprintk (GS_DEBUG_FLUSH, "charsleft = %d.\n", charsleft); + set_current_state (TASK_RUNNING); + + func_exit(); + return rv; +} + + + +void gs_flush_buffer(struct tty_struct *tty) +{ + struct gs_port *port; + unsigned long flags; + + func_enter (); + + port = tty->driver_data; + + if (!port) return; + + /* XXX Would the write semaphore do? */ + spin_lock_irqsave (&port->driver_lock, flags); + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + spin_unlock_irqrestore (&port->driver_lock, flags); + + tty_wakeup(tty); + func_exit (); +} + + +void gs_flush_chars(struct tty_struct * tty) +{ + struct gs_port *port; + + func_enter (); + + port = tty->driver_data; + + if (!port) return; + + if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !port->xmit_buf) { + func_exit (); + return; + } + + /* Beats me -- REW */ + port->port.flags |= GS_TX_INTEN; + port->rd->enable_tx_interrupts (port); + func_exit (); +} + + +void gs_stop(struct tty_struct * tty) +{ + struct gs_port *port; + + func_enter (); + + port = tty->driver_data; + + if (!port) return; + + if (port->xmit_cnt && + port->xmit_buf && + (port->port.flags & GS_TX_INTEN) ) { + port->port.flags &= ~GS_TX_INTEN; + port->rd->disable_tx_interrupts (port); + } + func_exit (); +} + + +void gs_start(struct tty_struct * tty) +{ + struct gs_port *port; + + port = tty->driver_data; + + if (!port) return; + + if (port->xmit_cnt && + port->xmit_buf && + !(port->port.flags & GS_TX_INTEN) ) { + port->port.flags |= GS_TX_INTEN; + port->rd->enable_tx_interrupts (port); + } + func_exit (); +} + + +static void gs_shutdown_port (struct gs_port *port) +{ + unsigned long flags; + + func_enter(); + + if (!port) return; + + if (!(port->port.flags & ASYNC_INITIALIZED)) + return; + + spin_lock_irqsave(&port->driver_lock, flags); + + if (port->xmit_buf) { + free_page((unsigned long) port->xmit_buf); + port->xmit_buf = NULL; + } + + if (port->port.tty) + set_bit(TTY_IO_ERROR, &port->port.tty->flags); + + port->rd->shutdown_port (port); + + port->port.flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->driver_lock, flags); + + func_exit(); +} + + +void gs_hangup(struct tty_struct *tty) +{ + struct gs_port *port; + unsigned long flags; + + func_enter (); + + port = tty->driver_data; + tty = port->port.tty; + if (!tty) + return; + + gs_shutdown_port (port); + spin_lock_irqsave(&port->port.lock, flags); + port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE); + port->port.tty = NULL; + port->port.count = 0; + spin_unlock_irqrestore(&port->port.lock, flags); + + wake_up_interruptible(&port->port.open_wait); + func_exit (); +} + + +int gs_block_til_ready(void *port_, struct file * filp) +{ + struct gs_port *gp = port_; + struct tty_port *port = &gp->port; + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + int CD; + struct tty_struct *tty; + unsigned long flags; + + func_enter (); + + if (!port) return 0; + + tty = port->tty; + + gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n"); + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->close_wait); + if (port->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; + } + + gs_dprintk (GS_DEBUG_BTR, "after hung up\n"); + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + gs_dprintk (GS_DEBUG_BTR, "after nonblock\n"); + + if (C_CLOCAL(tty)) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + + add_wait_queue(&port->open_wait, &wait); + + gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n"); + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) { + port->count--; + } + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); + while (1) { + CD = tty_port_carrier_raised(port); + gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD); + set_current_state (TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(port->flags & ASYNC_INITIALIZED)) { + if (port->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + if (!(port->flags & ASYNC_CLOSING) && + (do_clocal || CD)) + break; + gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n", + (int)signal_pending (current), *(long*)(¤t->blocked)); + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + } + gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n", + port->blocked_open); + set_current_state (TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) { + port->count++; + } + port->blocked_open--; + if (retval == 0) + port->flags |= ASYNC_NORMAL_ACTIVE; + spin_unlock_irqrestore(&port->lock, flags); + func_exit (); + return retval; +} + + +void gs_close(struct tty_struct * tty, struct file * filp) +{ + unsigned long flags; + struct gs_port *port; + + func_enter (); + + port = tty->driver_data; + + if (!port) return; + + if (!port->port.tty) { + /* This seems to happen when this is called from vhangup. */ + gs_dprintk (GS_DEBUG_CLOSE, "gs: Odd: port->port.tty is NULL\n"); + port->port.tty = tty; + } + + spin_lock_irqsave(&port->port.lock, flags); + + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->port.lock, flags); + if (port->rd->hungup) + port->rd->hungup (port); + func_exit (); + return; + } + + if ((tty->count == 1) && (port->port.count != 1)) { + printk(KERN_ERR "gs: gs_close port %p: bad port count;" + " tty->count is 1, port count is %d\n", port, port->port.count); + port->port.count = 1; + } + if (--port->port.count < 0) { + printk(KERN_ERR "gs: gs_close port %p: bad port count: %d\n", port, port->port.count); + port->port.count = 0; + } + + if (port->port.count) { + gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->port.count); + spin_unlock_irqrestore(&port->port.lock, flags); + func_exit (); + return; + } + port->port.flags |= ASYNC_CLOSING; + + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + /* if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, port->closing_wait); */ + + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + + spin_lock_irqsave(&port->driver_lock, flags); + port->rd->disable_rx_interrupts (port); + spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); + + /* close has no way of returning "EINTR", so discard return value */ + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + gs_wait_tx_flushed (port, port->closing_wait); + + port->port.flags &= ~GS_ACTIVE; + + gs_flush_buffer(tty); + + tty_ldisc_flush(tty); + tty->closing = 0; + + spin_lock_irqsave(&port->driver_lock, flags); + port->event = 0; + port->rd->close (port); + port->rd->shutdown_port (port); + spin_unlock_irqrestore(&port->driver_lock, flags); + + spin_lock_irqsave(&port->port.lock, flags); + port->port.tty = NULL; + + if (port->port.blocked_open) { + if (port->close_delay) { + spin_unlock_irqrestore(&port->port.lock, flags); + msleep_interruptible(jiffies_to_msecs(port->close_delay)); + spin_lock_irqsave(&port->port.lock, flags); + } + wake_up_interruptible(&port->port.open_wait); + } + port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED); + spin_unlock_irqrestore(&port->port.lock, flags); + wake_up_interruptible(&port->port.close_wait); + + func_exit (); +} + + +void gs_set_termios (struct tty_struct * tty, + struct ktermios * old_termios) +{ + struct gs_port *port; + int baudrate, tmp, rv; + struct ktermios *tiosp; + + func_enter(); + + port = tty->driver_data; + + if (!port) return; + if (!port->port.tty) { + /* This seems to happen when this is called after gs_close. */ + gs_dprintk (GS_DEBUG_TERMIOS, "gs: Odd: port->port.tty is NULL\n"); + port->port.tty = tty; + } + + + tiosp = tty->termios; + + if (gs_debug & GS_DEBUG_TERMIOS) { + gs_dprintk (GS_DEBUG_TERMIOS, "termios structure (%p):\n", tiosp); + } + + if(old_termios && (gs_debug & GS_DEBUG_TERMIOS)) { + if(tiosp->c_iflag != old_termios->c_iflag) printk("c_iflag changed\n"); + if(tiosp->c_oflag != old_termios->c_oflag) printk("c_oflag changed\n"); + if(tiosp->c_cflag != old_termios->c_cflag) printk("c_cflag changed\n"); + if(tiosp->c_lflag != old_termios->c_lflag) printk("c_lflag changed\n"); + if(tiosp->c_line != old_termios->c_line) printk("c_line changed\n"); + if(!memcmp(tiosp->c_cc, old_termios->c_cc, NCC)) printk("c_cc changed\n"); + } + + baudrate = tty_get_baud_rate(tty); + + if ((tiosp->c_cflag & CBAUD) == B38400) { + if ( (port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + baudrate = 57600; + else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + baudrate = 115200; + else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + baudrate = 230400; + else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + baudrate = 460800; + else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) + baudrate = (port->baud_base / port->custom_divisor); + } + + /* I recommend using THIS instead of the mess in termios (and + duplicating the above code). Next we should create a clean + interface towards this variable. If your card supports arbitrary + baud rates, (e.g. CD1400 or 16550 based cards) then everything + will be very easy..... */ + port->baud = baudrate; + + /* Two timer ticks seems enough to wakeup something like SLIP driver */ + /* Baudrate/10 is cps. Divide by HZ to get chars per tick. */ + tmp = (baudrate / 10 / HZ) * 2; + + if (tmp < 0) tmp = 0; + if (tmp >= SERIAL_XMIT_SIZE) tmp = SERIAL_XMIT_SIZE-1; + + port->wakeup_chars = tmp; + + /* We should really wait for the characters to be all sent before + changing the settings. -- CAL */ + rv = gs_wait_tx_flushed (port, MAX_SCHEDULE_TIMEOUT); + if (rv < 0) return /* rv */; + + rv = port->rd->set_real_termios(port); + if (rv < 0) return /* rv */; + + if ((!old_termios || + (old_termios->c_cflag & CRTSCTS)) && + !( tiosp->c_cflag & CRTSCTS)) { + tty->stopped = 0; + gs_start(tty); + } + +#ifdef tytso_patch_94Nov25_1726 + /* This "makes sense", Why is it commented out? */ + + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&port->gs.open_wait); +#endif + + func_exit(); + return /* 0 */; +} + + + +/* Must be called with interrupts enabled */ +int gs_init_port(struct gs_port *port) +{ + unsigned long flags; + + func_enter (); + + if (port->port.flags & ASYNC_INITIALIZED) { + func_exit (); + return 0; + } + if (!port->xmit_buf) { + /* We may sleep in get_zeroed_page() */ + unsigned long tmp; + + tmp = get_zeroed_page(GFP_KERNEL); + spin_lock_irqsave (&port->driver_lock, flags); + if (port->xmit_buf) + free_page (tmp); + else + port->xmit_buf = (unsigned char *) tmp; + spin_unlock_irqrestore(&port->driver_lock, flags); + if (!port->xmit_buf) { + func_exit (); + return -ENOMEM; + } + } + + spin_lock_irqsave (&port->driver_lock, flags); + if (port->port.tty) + clear_bit(TTY_IO_ERROR, &port->port.tty->flags); + mutex_init(&port->port_write_mutex); + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + spin_unlock_irqrestore(&port->driver_lock, flags); + gs_set_termios(port->port.tty, NULL); + spin_lock_irqsave (&port->driver_lock, flags); + port->port.flags |= ASYNC_INITIALIZED; + port->port.flags &= ~GS_TX_INTEN; + + spin_unlock_irqrestore(&port->driver_lock, flags); + func_exit (); + return 0; +} + + +int gs_setserial(struct gs_port *port, struct serial_struct __user *sp) +{ + struct serial_struct sio; + + if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) + return(-EFAULT); + + if (!capable(CAP_SYS_ADMIN)) { + if ((sio.baud_base != port->baud_base) || + (sio.close_delay != port->close_delay) || + ((sio.flags & ~ASYNC_USR_MASK) != + (port->port.flags & ~ASYNC_USR_MASK))) + return(-EPERM); + } + + port->port.flags = (port->port.flags & ~ASYNC_USR_MASK) | + (sio.flags & ASYNC_USR_MASK); + + port->baud_base = sio.baud_base; + port->close_delay = sio.close_delay; + port->closing_wait = sio.closing_wait; + port->custom_divisor = sio.custom_divisor; + + gs_set_termios (port->port.tty, NULL); + + return 0; +} + + +/*****************************************************************************/ + +/* + * Generate the serial struct info. + */ + +int gs_getserial(struct gs_port *port, struct serial_struct __user *sp) +{ + struct serial_struct sio; + + memset(&sio, 0, sizeof(struct serial_struct)); + sio.flags = port->port.flags; + sio.baud_base = port->baud_base; + sio.close_delay = port->close_delay; + sio.closing_wait = port->closing_wait; + sio.custom_divisor = port->custom_divisor; + sio.hub6 = 0; + + /* If you want you can override these. */ + sio.type = PORT_UNKNOWN; + sio.xmit_fifo_size = -1; + sio.line = -1; + sio.port = -1; + sio.irq = -1; + + if (port->rd->getserial) + port->rd->getserial (port, &sio); + + if (copy_to_user(sp, &sio, sizeof(struct serial_struct))) + return -EFAULT; + return 0; + +} + + +void gs_got_break(struct gs_port *port) +{ + func_enter (); + + tty_insert_flip_char(port->port.tty, 0, TTY_BREAK); + tty_schedule_flip(port->port.tty); + if (port->port.flags & ASYNC_SAK) { + do_SAK (port->port.tty); + } + + func_exit (); +} + + +EXPORT_SYMBOL(gs_put_char); +EXPORT_SYMBOL(gs_write); +EXPORT_SYMBOL(gs_write_room); +EXPORT_SYMBOL(gs_chars_in_buffer); +EXPORT_SYMBOL(gs_flush_buffer); +EXPORT_SYMBOL(gs_flush_chars); +EXPORT_SYMBOL(gs_stop); +EXPORT_SYMBOL(gs_start); +EXPORT_SYMBOL(gs_hangup); +EXPORT_SYMBOL(gs_block_til_ready); +EXPORT_SYMBOL(gs_close); +EXPORT_SYMBOL(gs_set_termios); +EXPORT_SYMBOL(gs_init_port); +EXPORT_SYMBOL(gs_setserial); +EXPORT_SYMBOL(gs_getserial); +EXPORT_SYMBOL(gs_got_break); + +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/generic_serial/rio/Makefile b/drivers/staging/generic_serial/rio/Makefile new file mode 100644 index 000000000000..1661875883fb --- /dev/null +++ b/drivers/staging/generic_serial/rio/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the linux rio-subsystem. +# +# (C) R.E.Wolff@BitWizard.nl +# +# This file is GPL. See other files for the full Blurb. I'm lazy today. +# + +obj-$(CONFIG_RIO) += rio.o + +rio-y := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \ + rioparam.o rioroute.o riotable.o riotty.o diff --git a/drivers/staging/generic_serial/rio/board.h b/drivers/staging/generic_serial/rio/board.h new file mode 100644 index 000000000000..bdea633a9076 --- /dev/null +++ b/drivers/staging/generic_serial/rio/board.h @@ -0,0 +1,132 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : board.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:07 +** Retrieved : 11/6/98 11:34:20 +** +** ident @(#)board.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_board_h__ +#define __rio_board_h__ + +/* +** board.h contains the definitions for the *hardware* of the host cards. +** It describes the memory overlay for the dual port RAM area. +*/ + +#define DP_SRAM1_SIZE 0x7C00 +#define DP_SRAM2_SIZE 0x0200 +#define DP_SRAM3_SIZE 0x7000 +#define DP_SCRATCH_SIZE 0x1000 +#define DP_PARMMAP_ADDR 0x01FE /* offset into SRAM2 */ +#define DP_STARTUP_ADDR 0x01F8 /* offset into SRAM2 */ + +/* +** The shape of the Host Control area, at offset 0x7C00, Write Only +*/ +struct s_Ctrl { + u8 DpCtl; /* 7C00 */ + u8 Dp_Unused2_[127]; + u8 DpIntSet; /* 7C80 */ + u8 Dp_Unused3_[127]; + u8 DpTpuReset; /* 7D00 */ + u8 Dp_Unused4_[127]; + u8 DpIntReset; /* 7D80 */ + u8 Dp_Unused5_[127]; +}; + +/* +** The PROM data area on the host (0x7C00), Read Only +*/ +struct s_Prom { + u16 DpSlxCode[2]; + u16 DpRev; + u16 Dp_Unused6_; + u16 DpUniq[4]; + u16 DpJahre; + u16 DpWoche; + u16 DpHwFeature[5]; + u16 DpOemId; + u16 DpSiggy[16]; +}; + +/* +** Union of the Ctrl and Prom areas +*/ +union u_CtrlProm { /* This is the control/PROM area (0x7C00) */ + struct s_Ctrl DpCtrl; + struct s_Prom DpProm; +}; + +/* +** The top end of memory! +*/ +struct s_ParmMapS { /* Area containing Parm Map Pointer */ + u8 Dp_Unused8_[DP_PARMMAP_ADDR]; + u16 DpParmMapAd; +}; + +struct s_StartUpS { + u8 Dp_Unused9_[DP_STARTUP_ADDR]; + u8 Dp_LongJump[0x4]; + u8 Dp_Unused10_[2]; + u8 Dp_ShortJump[0x2]; +}; + +union u_Sram2ParmMap { /* This is the top of memory (0x7E00-0x7FFF) */ + u8 DpSramMem[DP_SRAM2_SIZE]; + struct s_ParmMapS DpParmMapS; + struct s_StartUpS DpStartUpS; +}; + +/* +** This is the DP RAM overlay. +*/ +struct DpRam { + u8 DpSram1[DP_SRAM1_SIZE]; /* 0000 - 7BFF */ + union u_CtrlProm DpCtrlProm; /* 7C00 - 7DFF */ + union u_Sram2ParmMap DpSram2ParmMap; /* 7E00 - 7FFF */ + u8 DpScratch[DP_SCRATCH_SIZE]; /* 8000 - 8FFF */ + u8 DpSram3[DP_SRAM3_SIZE]; /* 9000 - FFFF */ +}; + +#define DpControl DpCtrlProm.DpCtrl.DpCtl +#define DpSetInt DpCtrlProm.DpCtrl.DpIntSet +#define DpResetTpu DpCtrlProm.DpCtrl.DpTpuReset +#define DpResetInt DpCtrlProm.DpCtrl.DpIntReset + +#define DpSlx DpCtrlProm.DpProm.DpSlxCode +#define DpRevision DpCtrlProm.DpProm.DpRev +#define DpUnique DpCtrlProm.DpProm.DpUniq +#define DpYear DpCtrlProm.DpProm.DpJahre +#define DpWeek DpCtrlProm.DpProm.DpWoche +#define DpSignature DpCtrlProm.DpProm.DpSiggy + +#define DpParmMapR DpSram2ParmMap.DpParmMapS.DpParmMapAd +#define DpSram2 DpSram2ParmMap.DpSramMem + +#endif diff --git a/drivers/staging/generic_serial/rio/cirrus.h b/drivers/staging/generic_serial/rio/cirrus.h new file mode 100644 index 000000000000..5ab51679caa2 --- /dev/null +++ b/drivers/staging/generic_serial/rio/cirrus.h @@ -0,0 +1,210 @@ +/**************************************************************************** + ******* ******* + ******* CIRRUS.H ******* + ******* ******* + **************************************************************************** + + Author : Jeremy Rolls + Date : 3 Aug 1990 + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- + + ***************************************************************************/ + +#ifndef _cirrus_h +#define _cirrus_h 1 + +/* Bit fields for particular registers shared with driver */ + +/* COR1 - driver and RTA */ +#define RIOC_COR1_ODD 0x80 /* Odd parity */ +#define RIOC_COR1_EVEN 0x00 /* Even parity */ +#define RIOC_COR1_NOP 0x00 /* No parity */ +#define RIOC_COR1_FORCE 0x20 /* Force parity */ +#define RIOC_COR1_NORMAL 0x40 /* With parity */ +#define RIOC_COR1_1STOP 0x00 /* 1 stop bit */ +#define RIOC_COR1_15STOP 0x04 /* 1.5 stop bits */ +#define RIOC_COR1_2STOP 0x08 /* 2 stop bits */ +#define RIOC_COR1_5BITS 0x00 /* 5 data bits */ +#define RIOC_COR1_6BITS 0x01 /* 6 data bits */ +#define RIOC_COR1_7BITS 0x02 /* 7 data bits */ +#define RIOC_COR1_8BITS 0x03 /* 8 data bits */ + +#define RIOC_COR1_HOST 0xef /* Safe host bits */ + +/* RTA only */ +#define RIOC_COR1_CINPCK 0x00 /* Check parity of received characters */ +#define RIOC_COR1_CNINPCK 0x10 /* Don't check parity */ + +/* COR2 bits for both RTA and driver use */ +#define RIOC_COR2_IXANY 0x80 /* IXANY - any character is XON */ +#define RIOC_COR2_IXON 0x40 /* IXON - enable tx soft flowcontrol */ +#define RIOC_COR2_RTSFLOW 0x02 /* Enable tx hardware flow control */ + +/* Additional driver bits */ +#define RIOC_COR2_HUPCL 0x20 /* Hang up on close */ +#define RIOC_COR2_CTSFLOW 0x04 /* Enable rx hardware flow control */ +#define RIOC_COR2_IXOFF 0x01 /* Enable rx software flow control */ +#define RIOC_COR2_DTRFLOW 0x08 /* Enable tx hardware flow control */ + +/* RTA use only */ +#define RIOC_COR2_ETC 0x20 /* Embedded transmit options */ +#define RIOC_COR2_LOCAL 0x10 /* Local loopback mode */ +#define RIOC_COR2_REMOTE 0x08 /* Remote loopback mode */ +#define RIOC_COR2_HOST 0xc2 /* Safe host bits */ + +/* COR3 - RTA use only */ +#define RIOC_COR3_SCDRNG 0x80 /* Enable special char detect for range */ +#define RIOC_COR3_SCD34 0x40 /* Special character detect for SCHR's 3 + 4 */ +#define RIOC_COR3_FCT 0x20 /* Flow control transparency */ +#define RIOC_COR3_SCD12 0x10 /* Special character detect for SCHR's 1 + 2 */ +#define RIOC_COR3_FIFO12 0x0c /* 12 chars for receive FIFO threshold */ +#define RIOC_COR3_FIFO10 0x0a /* 10 chars for receive FIFO threshold */ +#define RIOC_COR3_FIFO8 0x08 /* 8 chars for receive FIFO threshold */ +#define RIOC_COR3_FIFO6 0x06 /* 6 chars for receive FIFO threshold */ + +#define RIOC_COR3_THRESHOLD RIOC_COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */ + +#define RIOC_COR3_DEFAULT (RIOC_COR3_FCT | RIOC_COR3_THRESHOLD) + /* Default bits for COR3 */ + +/* COR4 driver and RTA use */ +#define RIOC_COR4_IGNCR 0x80 /* Throw away CR's on input */ +#define RIOC_COR4_ICRNL 0x40 /* Map CR -> NL on input */ +#define RIOC_COR4_INLCR 0x20 /* Map NL -> CR on input */ +#define RIOC_COR4_IGNBRK 0x10 /* Ignore Break */ +#define RIOC_COR4_NBRKINT 0x08 /* No interrupt on break (-BRKINT) */ +#define RIOC_COR4_RAISEMOD 0x01 /* Raise modem output lines on non-zero baud */ + + +/* COR4 driver only */ +#define RIOC_COR4_IGNPAR 0x04 /* IGNPAR (ignore characters with errors) */ +#define RIOC_COR4_PARMRK 0x02 /* PARMRK */ + +#define RIOC_COR4_HOST 0xf8 /* Safe host bits */ + +/* COR4 RTA only */ +#define RIOC_COR4_CIGNPAR 0x02 /* Thrown away bad characters */ +#define RIOC_COR4_CPARMRK 0x04 /* PARMRK characters */ +#define RIOC_COR4_CNPARMRK 0x03 /* Don't PARMRK */ + +/* COR5 driver and RTA use */ +#define RIOC_COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */ +#define RIOC_COR5_LNE 0x40 /* Enable LNEXT processing */ +#define RIOC_COR5_CMOE 0x20 /* Match good and errored characters */ +#define RIOC_COR5_ONLCR 0x02 /* NL -> CR NL on output */ +#define RIOC_COR5_OCRNL 0x01 /* CR -> NL on output */ + +/* +** Spare bits - these are not used in the CIRRUS registers, so we use +** them to set various other features. +*/ +/* +** tstop and tbusy indication +*/ +#define RIOC_COR5_TSTATE_ON 0x08 /* Turn on monitoring of tbusy and tstop */ +#define RIOC_COR5_TSTATE_OFF 0x04 /* Turn off monitoring of tbusy and tstop */ +/* +** TAB3 +*/ +#define RIOC_COR5_TAB3 0x10 /* TAB3 mode */ + +#define RIOC_COR5_HOST 0xc3 /* Safe host bits */ + +/* CCSR */ +#define RIOC_CCSR_TXFLOFF 0x04 /* Tx is xoffed */ + +/* MSVR1 */ +/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the + RTA. This is because otherwise DCD would get lost on the 1 parallel / 3 + serial option. +*/ +#define RIOC_MSVR1_CD 0x80 /* CD (DSR on Cirrus) */ +#define RIOC_MSVR1_RTS 0x40 /* RTS (CTS on Cirrus) */ +#define RIOC_MSVR1_RI 0x20 /* RI */ +#define RIOC_MSVR1_DTR 0x10 /* DTR (CD on Cirrus) */ +#define RIOC_MSVR1_CTS 0x01 /* CTS output pin (RTS on Cirrus) */ +/* Next two used to indicate state of tbusy and tstop to driver */ +#define RIOC_MSVR1_TSTOP 0x08 /* Set if port flow controlled */ +#define RIOC_MSVR1_TEMPTY 0x04 /* Set if port tx buffer empty */ + +#define RIOC_MSVR1_HOST 0xf3 /* The bits the host wants */ + +/* Defines for the subscripts of a CONFIG packet */ +#define RIOC_CONFIG_COR1 1 /* Option register 1 */ +#define RIOC_CONFIG_COR2 2 /* Option register 2 */ +#define RIOC_CONFIG_COR4 3 /* Option register 4 */ +#define RIOC_CONFIG_COR5 4 /* Option register 5 */ +#define RIOC_CONFIG_TXXON 5 /* Tx XON character */ +#define RIOC_CONFIG_TXXOFF 6 /* Tx XOFF character */ +#define RIOC_CONFIG_RXXON 7 /* Rx XON character */ +#define RIOC_CONFIG_RXXOFF 8 /* Rx XOFF character */ +#define RIOC_CONFIG_LNEXT 9 /* LNEXT character */ +#define RIOC_CONFIG_TXBAUD 10 /* Tx baud rate */ +#define RIOC_CONFIG_RXBAUD 11 /* Rx baud rate */ + +#define RIOC_PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */ + +/* Packet types going from Host to remote - with the exception of OPEN, MOPEN, + CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not + be used +*/ +#define RIOC_OPEN 0x00 /* Open a port */ +#define RIOC_CONFIG 0x01 /* Configure a port */ +#define RIOC_MOPEN 0x02 /* Modem open (block for DCD) */ +#define RIOC_CLOSE 0x03 /* Close a port */ +#define RIOC_WFLUSH (0x04 | RIOC_PRE_EMPTIVE) /* Write flush */ +#define RIOC_RFLUSH (0x05 | RIOC_PRE_EMPTIVE) /* Read flush */ +#define RIOC_RESUME (0x06 | RIOC_PRE_EMPTIVE) /* Resume if xoffed */ +#define RIOC_SBREAK 0x07 /* Start break */ +#define RIOC_EBREAK 0x08 /* End break */ +#define RIOC_SUSPEND (0x09 | RIOC_PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */ +#define RIOC_FCLOSE (0x0a | RIOC_PRE_EMPTIVE) /* Force close */ +#define RIOC_XPRINT 0x0b /* Xprint packet */ +#define RIOC_MBIS (0x0c | RIOC_PRE_EMPTIVE) /* Set modem lines */ +#define RIOC_MBIC (0x0d | RIOC_PRE_EMPTIVE) /* Clear modem lines */ +#define RIOC_MSET (0x0e | RIOC_PRE_EMPTIVE) /* Set modem lines */ +#define RIOC_PCLOSE 0x0f /* Pseudo close - Leaves rx/tx enabled */ +#define RIOC_MGET (0x10 | RIOC_PRE_EMPTIVE) /* Force update of modem status */ +#define RIOC_MEMDUMP (0x11 | RIOC_PRE_EMPTIVE) /* Send back mem from addr supplied */ +#define RIOC_READ_REGISTER (0x12 | RIOC_PRE_EMPTIVE) /* Read CD1400 register (debug) */ + +/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS + use data[4] / data[3] to indicate current state and modem status respectively +*/ + +#define RIOC_COMPLETE (0x20 | RIOC_PRE_EMPTIVE) + /* Command complete */ +#define RIOC_BREAK_RECEIVED (0x21 | RIOC_PRE_EMPTIVE) + /* Break received */ +#define RIOC_MODEM_STATUS (0x22 | RIOC_PRE_EMPTIVE) + /* Change in modem status */ + +/* "Command" packet that could go either way - handshake wake-up */ +#define RIOC_HANDSHAKE (0x23 | RIOC_PRE_EMPTIVE) + /* Wake-up to HOST / RTA */ + +#endif diff --git a/drivers/staging/generic_serial/rio/cmdblk.h b/drivers/staging/generic_serial/rio/cmdblk.h new file mode 100644 index 000000000000..9ed4f861675a --- /dev/null +++ b/drivers/staging/generic_serial/rio/cmdblk.h @@ -0,0 +1,53 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : cmdblk.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:09 +** Retrieved : 11/6/98 11:34:20 +** +** ident @(#)cmdblk.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_cmdblk_h__ +#define __rio_cmdblk_h__ + +/* +** the structure of a command block, used to queue commands destined for +** a rup. +*/ + +struct CmdBlk { + struct CmdBlk *NextP; /* Pointer to next command block */ + struct PKT Packet; /* A packet, to copy to the rup */ + /* The func to call to check if OK */ + int (*PreFuncP) (unsigned long, struct CmdBlk *); + int PreArg; /* The arg for the func */ + /* The func to call when completed */ + int (*PostFuncP) (unsigned long, struct CmdBlk *); + int PostArg; /* The arg for the func */ +}; + +#define NUM_RIO_CMD_BLKS (3 * (MAX_RUP * 4 + LINKS_PER_UNIT * 4)) +#endif diff --git a/drivers/staging/generic_serial/rio/cmdpkt.h b/drivers/staging/generic_serial/rio/cmdpkt.h new file mode 100644 index 000000000000..c1e7a2798070 --- /dev/null +++ b/drivers/staging/generic_serial/rio/cmdpkt.h @@ -0,0 +1,177 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : cmdpkt.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:09 +** Retrieved : 11/6/98 11:34:20 +** +** ident @(#)cmdpkt.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ +#ifndef __rio_cmdpkt_h__ +#define __rio_cmdpkt_h__ + +/* +** overlays for the data area of a packet. Used in both directions +** (to build a packet to send, and to interpret a packet that arrives) +** and is very inconvenient for MIPS, so they appear as two separate +** structures - those used for modifying/reading packets on the card +** and those for modifying/reading packets in real memory, which have an _M +** suffix. +*/ + +#define RTA_BOOT_DATA_SIZE (PKT_MAX_DATA_LEN-2) + +/* +** The boot information packet looks like this: +** This structure overlays a PktCmd->CmdData structure, and so starts +** at Data[2] in the actual pkt! +*/ +struct BootSequence { + u16 NumPackets; + u16 LoadBase; + u16 CodeSize; +}; + +#define BOOT_SEQUENCE_LEN 8 + +struct SamTop { + u8 Unit; + u8 Link; +}; + +struct CmdHdr { + u8 PcCommand; + union { + u8 PcPhbNum; + u8 PcLinkNum; + u8 PcIDNum; + } U0; +}; + + +struct PktCmd { + union { + struct { + struct CmdHdr CmdHdr; + struct BootSequence PcBootSequence; + } S1; + struct { + u16 PcSequence; + u8 PcBootData[RTA_BOOT_DATA_SIZE]; + } S2; + struct { + u16 __crud__; + u8 PcUniqNum[4]; /* this is really a uint. */ + u8 PcModuleTypes; /* what modules are fitted */ + } S3; + struct { + struct CmdHdr CmdHdr; + u8 __undefined__; + u8 PcModemStatus; + u8 PcPortStatus; + u8 PcSubCommand; /* commands like mem or register dump */ + u16 PcSubAddr; /* Address for command */ + u8 PcSubData[64]; /* Date area for command */ + } S4; + struct { + struct CmdHdr CmdHdr; + u8 PcCommandText[1]; + u8 __crud__[20]; + u8 PcIDNum2; /* It had to go somewhere! */ + } S5; + struct { + struct CmdHdr CmdHdr; + struct SamTop Topology[LINKS_PER_UNIT]; + } S6; + } U1; +}; + +struct PktCmd_M { + union { + struct { + struct { + u8 PcCommand; + union { + u8 PcPhbNum; + u8 PcLinkNum; + u8 PcIDNum; + } U0; + } CmdHdr; + struct { + u16 NumPackets; + u16 LoadBase; + u16 CodeSize; + } PcBootSequence; + } S1; + struct { + u16 PcSequence; + u8 PcBootData[RTA_BOOT_DATA_SIZE]; + } S2; + struct { + u16 __crud__; + u8 PcUniqNum[4]; /* this is really a uint. */ + u8 PcModuleTypes; /* what modules are fitted */ + } S3; + struct { + u16 __cmd_hdr__; + u8 __undefined__; + u8 PcModemStatus; + u8 PcPortStatus; + u8 PcSubCommand; + u16 PcSubAddr; + u8 PcSubData[64]; + } S4; + struct { + u16 __cmd_hdr__; + u8 PcCommandText[1]; + u8 __crud__[20]; + u8 PcIDNum2; /* Tacked on end */ + } S5; + struct { + u16 __cmd_hdr__; + struct Top Topology[LINKS_PER_UNIT]; + } S6; + } U1; +}; + +#define Command U1.S1.CmdHdr.PcCommand +#define PhbNum U1.S1.CmdHdr.U0.PcPhbNum +#define IDNum U1.S1.CmdHdr.U0.PcIDNum +#define IDNum2 U1.S5.PcIDNum2 +#define LinkNum U1.S1.CmdHdr.U0.PcLinkNum +#define Sequence U1.S2.PcSequence +#define BootData U1.S2.PcBootData +#define BootSequence U1.S1.PcBootSequence +#define UniqNum U1.S3.PcUniqNum +#define ModemStatus U1.S4.PcModemStatus +#define PortStatus U1.S4.PcPortStatus +#define SubCommand U1.S4.PcSubCommand +#define SubAddr U1.S4.PcSubAddr +#define SubData U1.S4.PcSubData +#define CommandText U1.S5.PcCommandText +#define RouteTopology U1.S6.Topology +#define ModuleTypes U1.S3.PcModuleTypes + +#endif diff --git a/drivers/staging/generic_serial/rio/daemon.h b/drivers/staging/generic_serial/rio/daemon.h new file mode 100644 index 000000000000..4af90323fd00 --- /dev/null +++ b/drivers/staging/generic_serial/rio/daemon.h @@ -0,0 +1,307 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : daemon.h +** SID : 1.3 +** Last Modified : 11/6/98 11:34:09 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)daemon.h 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_daemon_h__ +#define __rio_daemon_h__ + + +/* +** structures used on /dev/rio +*/ + +struct Error { + unsigned int Error; + unsigned int Entry; + unsigned int Other; +}; + +struct DownLoad { + char __user *DataP; + unsigned int Count; + unsigned int ProductCode; +}; + +/* +** A few constants.... +*/ +#ifndef MAX_VERSION_LEN +#define MAX_VERSION_LEN 256 +#endif + +#ifndef MAX_XP_CTRL_LEN +#define MAX_XP_CTRL_LEN 16 /* ALSO IN PORT.H */ +#endif + +struct PortSetup { + unsigned int From; /* Set/Clear XP & IXANY Control from this port.... */ + unsigned int To; /* .... to this port */ + unsigned int XpCps; /* at this speed */ + char XpOn[MAX_XP_CTRL_LEN]; /* this is the start string */ + char XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */ + u8 IxAny; /* enable/disable IXANY */ + u8 IxOn; /* enable/disable IXON */ + u8 Lock; /* lock port params */ + u8 Store; /* store params across closes */ + u8 Drain; /* close only when drained */ +}; + +struct LpbReq { + unsigned int Host; + unsigned int Link; + struct LPB __user *LpbP; +}; + +struct RupReq { + unsigned int HostNum; + unsigned int RupNum; + struct RUP __user *RupP; +}; + +struct PortReq { + unsigned int SysPort; + struct Port __user *PortP; +}; + +struct StreamInfo { + unsigned int SysPort; + int RQueue; + int WQueue; +}; + +struct HostReq { + unsigned int HostNum; + struct Host __user *HostP; +}; + +struct HostDpRam { + unsigned int HostNum; + struct DpRam __user *DpRamP; +}; + +struct DebugCtrl { + unsigned int SysPort; + unsigned int Debug; + unsigned int Wait; +}; + +struct MapInfo { + unsigned int FirstPort; /* 8 ports, starting from this (tty) number */ + unsigned int RtaUnique; /* reside on this RTA (unique number) */ +}; + +struct MapIn { + unsigned int NumEntries; /* How many port sets are we mapping? */ + struct MapInfo *MapInfoP; /* Pointer to (user space) info */ +}; + +struct SendPack { + unsigned int PortNum; + unsigned char Len; + unsigned char Data[PKT_MAX_DATA_LEN]; +}; + +struct SpecialRupCmd { + struct PKT Packet; + unsigned short Host; + unsigned short RupNum; +}; + +struct IdentifyRta { + unsigned long RtaUnique; + u8 ID; +}; + +struct KillNeighbour { + unsigned long UniqueNum; + u8 Link; +}; + +struct rioVersion { + char version[MAX_VERSION_LEN]; + char relid[MAX_VERSION_LEN]; + int buildLevel; + char buildDate[MAX_VERSION_LEN]; +}; + + +/* +** RIOC commands are for the daemon type operations +** +** 09.12.1998 ARG - ESIL 0776 part fix +** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a +** #ifndef here first. +** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now +** allowed to be used by customers. +*/ +#ifndef RIOC +#define RIOC ('R'<<8)|('i'<<16)|('o'<<24) +#endif + +/* +** Boot stuff +*/ +#define RIO_GET_TABLE (RIOC | 100) +#define RIO_PUT_TABLE (RIOC | 101) +#define RIO_ASSIGN_RTA (RIOC | 102) +#define RIO_DELETE_RTA (RIOC | 103) +#define RIO_HOST_FOAD (RIOC | 104) +#define RIO_QUICK_CHECK (RIOC | 105) +#define RIO_SIGNALS_ON (RIOC | 106) +#define RIO_SIGNALS_OFF (RIOC | 107) +#define RIO_CHANGE_NAME (RIOC | 108) +#define RIO_DOWNLOAD (RIOC | 109) +#define RIO_GET_LOG (RIOC | 110) +#define RIO_SETUP_PORTS (RIOC | 111) +#define RIO_ALL_MODEM (RIOC | 112) + +/* +** card state, debug stuff +*/ +#define RIO_NUM_HOSTS (RIOC | 120) +#define RIO_HOST_LPB (RIOC | 121) +#define RIO_HOST_RUP (RIOC | 122) +#define RIO_HOST_PORT (RIOC | 123) +#define RIO_PARMS (RIOC | 124) +#define RIO_HOST_REQ (RIOC | 125) +#define RIO_READ_CONFIG (RIOC | 126) +#define RIO_SET_CONFIG (RIOC | 127) +#define RIO_VERSID (RIOC | 128) +#define RIO_FLAGS (RIOC | 129) +#define RIO_SETDEBUG (RIOC | 130) +#define RIO_GETDEBUG (RIOC | 131) +#define RIO_READ_LEVELS (RIOC | 132) +#define RIO_SET_FAST_BUS (RIOC | 133) +#define RIO_SET_SLOW_BUS (RIOC | 134) +#define RIO_SET_BYTE_MODE (RIOC | 135) +#define RIO_SET_WORD_MODE (RIOC | 136) +#define RIO_STREAM_INFO (RIOC | 137) +#define RIO_START_POLLER (RIOC | 138) +#define RIO_STOP_POLLER (RIOC | 139) +#define RIO_LAST_ERROR (RIOC | 140) +#define RIO_TICK (RIOC | 141) +#define RIO_TOCK (RIOC | 241) /* I did this on purpose, you know. */ +#define RIO_SEND_PACKET (RIOC | 142) +#define RIO_SET_BUSY (RIOC | 143) +#define SPECIAL_RUP_CMD (RIOC | 144) +#define RIO_FOAD_RTA (RIOC | 145) +#define RIO_ZOMBIE_RTA (RIOC | 146) +#define RIO_IDENTIFY_RTA (RIOC | 147) +#define RIO_KILL_NEIGHBOUR (RIOC | 148) +#define RIO_DEBUG_MEM (RIOC | 149) +/* +** 150 - 167 used..... See below +*/ +#define RIO_GET_PORT_SETUP (RIOC | 168) +#define RIO_RESUME (RIOC | 169) +#define RIO_MESG (RIOC | 170) +#define RIO_NO_MESG (RIOC | 171) +#define RIO_WHAT_MESG (RIOC | 172) +#define RIO_HOST_DPRAM (RIOC | 173) +#define RIO_MAP_B50_TO_50 (RIOC | 174) +#define RIO_MAP_B50_TO_57600 (RIOC | 175) +#define RIO_MAP_B110_TO_110 (RIOC | 176) +#define RIO_MAP_B110_TO_115200 (RIOC | 177) +#define RIO_GET_PORT_PARAMS (RIOC | 178) +#define RIO_SET_PORT_PARAMS (RIOC | 179) +#define RIO_GET_PORT_TTY (RIOC | 180) +#define RIO_SET_PORT_TTY (RIOC | 181) +#define RIO_SYSLOG_ONLY (RIOC | 182) +#define RIO_SYSLOG_CONS (RIOC | 183) +#define RIO_CONS_ONLY (RIOC | 184) +#define RIO_BLOCK_OPENS (RIOC | 185) + +/* +** 02.03.1999 ARG - ESIL 0820 fix : +** RIOBootMode is no longer use by the driver, so these ioctls +** are now obsolete : +** +#define RIO_GET_BOOT_MODE (RIOC | 186) +#define RIO_SET_BOOT_MODE (RIOC | 187) +** +*/ + +#define RIO_MEM_DUMP (RIOC | 189) +#define RIO_READ_REGISTER (RIOC | 190) +#define RIO_GET_MODTYPE (RIOC | 191) +#define RIO_SET_TIMER (RIOC | 192) +#define RIO_READ_CHECK (RIOC | 196) +#define RIO_WAITING_FOR_RESTART (RIOC | 197) +#define RIO_BIND_RTA (RIOC | 198) +#define RIO_GET_BINDINGS (RIOC | 199) +#define RIO_PUT_BINDINGS (RIOC | 200) + +#define RIO_MAKE_DEV (RIOC | 201) +#define RIO_MINOR (RIOC | 202) + +#define RIO_IDENTIFY_DRIVER (RIOC | 203) +#define RIO_DISPLAY_HOST_CFG (RIOC | 204) + + +/* +** MAKE_DEV / MINOR stuff +*/ +#define RIO_DEV_DIRECT 0x0000 +#define RIO_DEV_MODEM 0x0200 +#define RIO_DEV_XPRINT 0x0400 +#define RIO_DEV_MASK 0x0600 + +/* +** port management, xprint stuff +*/ +#define rIOCN(N) (RIOC|(N)) +#define rIOCR(N,T) (RIOC|(N)) +#define rIOCW(N,T) (RIOC|(N)) + +#define RIO_GET_XP_ON rIOCR(150,char[16]) /* start xprint string */ +#define RIO_SET_XP_ON rIOCW(151,char[16]) +#define RIO_GET_XP_OFF rIOCR(152,char[16]) /* finish xprint string */ +#define RIO_SET_XP_OFF rIOCW(153,char[16]) +#define RIO_GET_XP_CPS rIOCR(154,int) /* xprint CPS */ +#define RIO_SET_XP_CPS rIOCW(155,int) +#define RIO_GET_IXANY rIOCR(156,int) /* ixany allowed? */ +#define RIO_SET_IXANY rIOCW(157,int) +#define RIO_SET_IXANY_ON rIOCN(158) /* allow ixany */ +#define RIO_SET_IXANY_OFF rIOCN(159) /* disallow ixany */ +#define RIO_GET_MODEM rIOCR(160,int) /* port is modem/direct line? */ +#define RIO_SET_MODEM rIOCW(161,int) +#define RIO_SET_MODEM_ON rIOCN(162) /* port is a modem */ +#define RIO_SET_MODEM_OFF rIOCN(163) /* port is direct */ +#define RIO_GET_IXON rIOCR(164,int) /* ixon allowed? */ +#define RIO_SET_IXON rIOCW(165,int) +#define RIO_SET_IXON_ON rIOCN(166) /* allow ixon */ +#define RIO_SET_IXON_OFF rIOCN(167) /* disallow ixon */ + +#define RIO_GET_SIVIEW ((('s')<<8) | 106) /* backwards compatible with SI */ + +#define RIO_IOCTL_UNKNOWN -2 + +#endif diff --git a/drivers/staging/generic_serial/rio/errors.h b/drivers/staging/generic_serial/rio/errors.h new file mode 100644 index 000000000000..bdb05234090a --- /dev/null +++ b/drivers/staging/generic_serial/rio/errors.h @@ -0,0 +1,98 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : errors.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:10 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)errors.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_errors_h__ +#define __rio_errors_h__ + +/* +** error codes +*/ + +#define NOTHING_WRONG_AT_ALL 0 +#define BAD_CHARACTER_IN_NAME 1 +#define TABLE_ENTRY_ISNT_PROPERLY_NULL 2 +#define UNKNOWN_HOST_NUMBER 3 +#define ZERO_RTA_ID 4 +#define BAD_RTA_ID 5 +#define DUPLICATED_RTA_ID 6 +#define DUPLICATE_UNIQUE_NUMBER 7 +#define BAD_TTY_NUMBER 8 +#define TTY_NUMBER_IN_USE 9 +#define NAME_USED_TWICE 10 +#define HOST_ID_NOT_ZERO 11 +#define BOOT_IN_PROGRESS 12 +#define COPYIN_FAILED 13 +#define HOST_FILE_TOO_LARGE 14 +#define COPYOUT_FAILED 15 +#define NOT_SUPER_USER 16 +#define RIO_ALREADY_POLLING 17 + +#define ID_NUMBER_OUT_OF_RANGE 18 +#define PORT_NUMBER_OUT_OF_RANGE 19 +#define HOST_NUMBER_OUT_OF_RANGE 20 +#define RUP_NUMBER_OUT_OF_RANGE 21 +#define TTY_NUMBER_OUT_OF_RANGE 22 +#define LINK_NUMBER_OUT_OF_RANGE 23 + +#define HOST_NOT_RUNNING 24 +#define IOCTL_COMMAND_UNKNOWN 25 +#define RIO_SYSTEM_HALTED 26 +#define WAIT_FOR_DRAIN_BROKEN 27 +#define PORT_NOT_MAPPED_INTO_SYSTEM 28 +#define EXCLUSIVE_USE_SET 29 +#define WAIT_FOR_NOT_CLOSING_BROKEN 30 +#define WAIT_FOR_PORT_TO_OPEN_BROKEN 31 +#define WAIT_FOR_CARRIER_BROKEN 32 +#define WAIT_FOR_NOT_IN_USE_BROKEN 33 +#define WAIT_FOR_CAN_ADD_COMMAND_BROKEN 34 +#define WAIT_FOR_ADD_COMMAND_BROKEN 35 +#define WAIT_FOR_NOT_PARAM_BROKEN 36 +#define WAIT_FOR_RETRY_BROKEN 37 +#define HOST_HAS_ALREADY_BEEN_BOOTED 38 +#define UNIT_IS_IN_USE 39 +#define COULDNT_FIND_ENTRY 40 +#define RTA_UNIQUE_NUMBER_ZERO 41 +#define CLOSE_COMMAND_FAILED 42 +#define WAIT_FOR_CLOSE_BROKEN 43 +#define CPS_VALUE_OUT_OF_RANGE 44 +#define ID_ALREADY_IN_USE 45 +#define SIGNALS_ALREADY_SET 46 +#define NOT_RECEIVING_PROCESS 47 +#define RTA_NUMBER_WRONG 48 +#define NO_SUCH_PRODUCT 49 +#define HOST_SYSPORT_BAD 50 +#define ID_NOT_TENTATIVE 51 +#define XPRINT_CPS_OUT_OF_RANGE 52 +#define NOT_ENOUGH_CORE_FOR_PCI_COPY 53 + + +#endif /* __rio_errors_h__ */ diff --git a/drivers/staging/generic_serial/rio/func.h b/drivers/staging/generic_serial/rio/func.h new file mode 100644 index 000000000000..078d44f85e45 --- /dev/null +++ b/drivers/staging/generic_serial/rio/func.h @@ -0,0 +1,143 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : func.h +** SID : 1.3 +** Last Modified : 11/6/98 11:34:10 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)func.h 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __func_h_def +#define __func_h_def + +#include + +/* rioboot.c */ +int RIOBootCodeRTA(struct rio_info *, struct DownLoad *); +int RIOBootCodeHOST(struct rio_info *, struct DownLoad *); +int RIOBootCodeUNKNOWN(struct rio_info *, struct DownLoad *); +void msec_timeout(struct Host *); +int RIOBootRup(struct rio_info *, unsigned int, struct Host *, struct PKT __iomem *); +int RIOBootOk(struct rio_info *, struct Host *, unsigned long); +int RIORtaBound(struct rio_info *, unsigned int); +void rio_fill_host_slot(int, int, unsigned int, struct Host *); + +/* riocmd.c */ +int RIOFoadRta(struct Host *, struct Map *); +int RIOZombieRta(struct Host *, struct Map *); +int RIOCommandRta(struct rio_info *, unsigned long, int (*func) (struct Host *, struct Map *)); +int RIOIdentifyRta(struct rio_info *, void __user *); +int RIOKillNeighbour(struct rio_info *, void __user *); +int RIOSuspendBootRta(struct Host *, int, int); +int RIOFoadWakeup(struct rio_info *); +struct CmdBlk *RIOGetCmdBlk(void); +void RIOFreeCmdBlk(struct CmdBlk *); +int RIOQueueCmdBlk(struct Host *, unsigned int, struct CmdBlk *); +void RIOPollHostCommands(struct rio_info *, struct Host *); +int RIOWFlushMark(unsigned long, struct CmdBlk *); +int RIORFlushEnable(unsigned long, struct CmdBlk *); +int RIOUnUse(unsigned long, struct CmdBlk *); + +/* rioctrl.c */ +int riocontrol(struct rio_info *, dev_t, int, unsigned long, int); + +int RIOPreemptiveCmd(struct rio_info *, struct Port *, unsigned char); + +/* rioinit.c */ +void rioinit(struct rio_info *, struct RioHostInfo *); +void RIOInitHosts(struct rio_info *, struct RioHostInfo *); +void RIOISAinit(struct rio_info *, int); +int RIODoAT(struct rio_info *, int, int); +caddr_t RIOCheckForATCard(int); +int RIOAssignAT(struct rio_info *, int, void __iomem *, int); +int RIOBoardTest(unsigned long, void __iomem *, unsigned char, int); +void RIOAllocDataStructs(struct rio_info *); +void RIOSetupDataStructs(struct rio_info *); +int RIODefaultName(struct rio_info *, struct Host *, unsigned int); +struct rioVersion *RIOVersid(void); +void RIOHostReset(unsigned int, struct DpRam __iomem *, unsigned int); + +/* riointr.c */ +void RIOTxEnable(char *); +void RIOServiceHost(struct rio_info *, struct Host *); +int riotproc(struct rio_info *, struct ttystatics *, int, int); + +/* rioparam.c */ +int RIOParam(struct Port *, int, int, int); +int RIODelay(struct Port *PortP, int); +int RIODelay_ni(struct Port *PortP, int); +void ms_timeout(struct Port *); +int can_add_transmit(struct PKT __iomem **, struct Port *); +void add_transmit(struct Port *); +void put_free_end(struct Host *, struct PKT __iomem *); +int can_remove_receive(struct PKT __iomem **, struct Port *); +void remove_receive(struct Port *); + +/* rioroute.c */ +int RIORouteRup(struct rio_info *, unsigned int, struct Host *, struct PKT __iomem *); +void RIOFixPhbs(struct rio_info *, struct Host *, unsigned int); +unsigned int GetUnitType(unsigned int); +int RIOSetChange(struct rio_info *); +int RIOFindFreeID(struct rio_info *, struct Host *, unsigned int *, unsigned int *); + + +/* riotty.c */ + +int riotopen(struct tty_struct *tty, struct file *filp); +int riotclose(void *ptr); +int riotioctl(struct rio_info *, struct tty_struct *, int, caddr_t); +void ttyseth(struct Port *, struct ttystatics *, struct old_sgttyb *sg); + +/* riotable.c */ +int RIONewTable(struct rio_info *); +int RIOApel(struct rio_info *); +int RIODeleteRta(struct rio_info *, struct Map *); +int RIOAssignRta(struct rio_info *, struct Map *); +int RIOReMapPorts(struct rio_info *, struct Host *, struct Map *); +int RIOChangeName(struct rio_info *, struct Map *); + +#if 0 +/* riodrvr.c */ +struct rio_info *rio_install(struct RioHostInfo *); +int rio_uninstall(struct rio_info *); +int rio_open(struct rio_info *, int, struct file *); +int rio_close(struct rio_info *, struct file *); +int rio_read(struct rio_info *, struct file *, char *, int); +int rio_write(struct rio_info *, struct file *f, char *, int); +int rio_ioctl(struct rio_info *, struct file *, int, char *); +int rio_select(struct rio_info *, struct file *f, int, struct sel *); +int rio_intr(char *); +int rio_isr_thread(char *); +struct rio_info *rio_info_store(int cmd, struct rio_info *p); +#endif + +extern void rio_copy_to_card(void *from, void __iomem *to, int len); +extern int rio_minor(struct tty_struct *tty); +extern int rio_ismodem(struct tty_struct *tty); + +extern void rio_start_card_running(struct Host *HostP); + +#endif /* __func_h_def */ diff --git a/drivers/staging/generic_serial/rio/host.h b/drivers/staging/generic_serial/rio/host.h new file mode 100644 index 000000000000..78f24540c224 --- /dev/null +++ b/drivers/staging/generic_serial/rio/host.h @@ -0,0 +1,123 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : host.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:10 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)host.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_host_h__ +#define __rio_host_h__ + +/* +** the host structure - one per host card in the system. +*/ + +#define MAX_EXTRA_UNITS 64 + +/* +** Host data structure. This is used for the software equiv. of +** the host. +*/ +struct Host { + struct pci_dev *pdev; + unsigned char Type; /* RIO_EISA, RIO_MCA, ... */ + unsigned char Ivec; /* POLLED or ivec number */ + unsigned char Mode; /* Control stuff */ + unsigned char Slot; /* Slot */ + void __iomem *Caddr; /* KV address of DPRAM */ + struct DpRam __iomem *CardP; /* KV address of DPRAM, with overlay */ + unsigned long PaddrP; /* Phys. address of DPRAM */ + char Name[MAX_NAME_LEN]; /* The name of the host */ + unsigned int UniqueNum; /* host unique number */ + spinlock_t HostLock; /* Lock structure for MPX */ + unsigned int WorkToBeDone; /* set to true each interrupt */ + unsigned int InIntr; /* Being serviced? */ + unsigned int IntSrvDone; /* host's interrupt has been serviced */ + void (*Copy) (void *, void __iomem *, int); /* copy func */ + struct timer_list timer; + /* + ** I M P O R T A N T ! + ** + ** The rest of this data structure is cleared to zero after + ** a RIO_HOST_FOAD command. + */ + + unsigned long Flags; /* Whats going down */ +#define RC_WAITING 0 +#define RC_STARTUP 1 +#define RC_RUNNING 2 +#define RC_STUFFED 3 +#define RC_READY 7 +#define RUN_STATE 7 +/* +** Boot mode applies to the way in which hosts in this system will +** boot RTAs +*/ +#define RC_BOOT_ALL 0x8 /* Boot all RTAs attached */ +#define RC_BOOT_OWN 0x10 /* Only boot RTAs bound to this system */ +#define RC_BOOT_NONE 0x20 /* Don't boot any RTAs (slave mode) */ + + struct Top Topology[LINKS_PER_UNIT]; /* one per link */ + struct Map Mapping[MAX_RUP]; /* Mappings for host */ + struct PHB __iomem *PhbP; /* Pointer to the PHB array */ + unsigned short __iomem *PhbNumP; /* Ptr to Number of PHB's */ + struct LPB __iomem *LinkStrP; /* Link Structure Array */ + struct RUP __iomem *RupP; /* Sixteen real rups here */ + struct PARM_MAP __iomem *ParmMapP; /* points to the parmmap */ + unsigned int ExtraUnits[MAX_EXTRA_UNITS]; /* unknown things */ + unsigned int NumExtraBooted; /* how many of the above */ + /* + ** Twenty logical rups. + ** The first sixteen are the real Rup entries (above), the last four + ** are the link RUPs. + */ + struct UnixRup UnixRups[MAX_RUP + LINKS_PER_UNIT]; + int timeout_id; /* For calling 100 ms delays */ + int timeout_sem; /* For calling 100 ms delays */ + unsigned long locks; /* long req'd for set_bit --RR */ + char ____end_marker____; +}; +#define Control CardP->DpControl +#define SetInt CardP->DpSetInt +#define ResetTpu CardP->DpResetTpu +#define ResetInt CardP->DpResetInt +#define Signature CardP->DpSignature +#define Sram1 CardP->DpSram1 +#define Sram2 CardP->DpSram2 +#define Sram3 CardP->DpSram3 +#define Scratch CardP->DpScratch +#define __ParmMapR CardP->DpParmMapR +#define SLX CardP->DpSlx +#define Revision CardP->DpRevision +#define Unique CardP->DpUnique +#define Year CardP->DpYear +#define Week CardP->DpWeek + +#define RIO_DUMBPARM 0x0860 /* what not to expect */ + +#endif diff --git a/drivers/staging/generic_serial/rio/link.h b/drivers/staging/generic_serial/rio/link.h new file mode 100644 index 000000000000..f3bf11a04d41 --- /dev/null +++ b/drivers/staging/generic_serial/rio/link.h @@ -0,0 +1,96 @@ +/**************************************************************************** + ******* ******* + ******* L I N K + ******* ******* + **************************************************************************** + + Author : Ian Nandhra / Jeremy Rolls + Date : + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- + + ***************************************************************************/ + +#ifndef _link_h +#define _link_h 1 + +/************************************************* + * Define the Link Status stuff + ************************************************/ +/* Boot request stuff */ +#define BOOT_REQUEST ((ushort) 0) /* Request for a boot */ +#define BOOT_ABORT ((ushort) 1) /* Abort a boot */ +#define BOOT_SEQUENCE ((ushort) 2) /* Packet with the number of packets + and load address */ +#define BOOT_COMPLETED ((ushort) 3) /* Boot completed */ + + +struct LPB { + u16 link_number; /* Link Number */ + u16 in_ch; /* Link In Channel */ + u16 out_ch; /* Link Out Channel */ + u8 attached_serial[4]; /* Attached serial number */ + u8 attached_host_serial[4]; + /* Serial number of Host who + booted the other end */ + u16 descheduled; /* Currently Descheduled */ + u16 state; /* Current state */ + u16 send_poll; /* Send a Poll Packet */ + u16 ltt_p; /* Process Descriptor */ + u16 lrt_p; /* Process Descriptor */ + u16 lrt_status; /* Current lrt status */ + u16 ltt_status; /* Current ltt status */ + u16 timeout; /* Timeout value */ + u16 topology; /* Topology bits */ + u16 mon_ltt; + u16 mon_lrt; + u16 WaitNoBoot; /* Secs to hold off booting */ + u16 add_packet_list; /* Add packets to here */ + u16 remove_packet_list; /* Send packets from here */ + + u16 lrt_fail_chan; /* Lrt's failure channel */ + u16 ltt_fail_chan; /* Ltt's failure channel */ + + /* RUP structure for HOST to driver communications */ + struct RUP rup; + struct RUP link_rup; /* RUP for the link (POLL, + topology etc.) */ + u16 attached_link; /* Number of attached link */ + u16 csum_errors; /* csum errors */ + u16 num_disconnects; /* number of disconnects */ + u16 num_sync_rcvd; /* # sync's received */ + u16 num_sync_rqst; /* # sync requests */ + u16 num_tx; /* Num pkts sent */ + u16 num_rx; /* Num pkts received */ + u16 module_attached; /* Module tpyes of attached */ + u16 led_timeout; /* LED timeout */ + u16 first_port; /* First port to service */ + u16 last_port; /* Last port to service */ +}; + +#endif + +/*********** end of file ***********/ diff --git a/drivers/staging/generic_serial/rio/linux_compat.h b/drivers/staging/generic_serial/rio/linux_compat.h new file mode 100644 index 000000000000..34c0d2899ef1 --- /dev/null +++ b/drivers/staging/generic_serial/rio/linux_compat.h @@ -0,0 +1,77 @@ +/* + * (C) 2000 R.E.Wolff@BitWizard.nl + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + + +#define DEBUG_ALL + +struct ttystatics { + struct termios tm; +}; + +extern int rio_debug; + +#define RIO_DEBUG_INIT 0x000001 +#define RIO_DEBUG_BOOT 0x000002 +#define RIO_DEBUG_CMD 0x000004 +#define RIO_DEBUG_CTRL 0x000008 +#define RIO_DEBUG_INTR 0x000010 +#define RIO_DEBUG_PARAM 0x000020 +#define RIO_DEBUG_ROUTE 0x000040 +#define RIO_DEBUG_TABLE 0x000080 +#define RIO_DEBUG_TTY 0x000100 +#define RIO_DEBUG_FLOW 0x000200 +#define RIO_DEBUG_MODEMSIGNALS 0x000400 +#define RIO_DEBUG_PROBE 0x000800 +#define RIO_DEBUG_CLEANUP 0x001000 +#define RIO_DEBUG_IFLOW 0x002000 +#define RIO_DEBUG_PFE 0x004000 +#define RIO_DEBUG_REC 0x008000 +#define RIO_DEBUG_SPINLOCK 0x010000 +#define RIO_DEBUG_DELAY 0x020000 +#define RIO_DEBUG_MOD_COUNT 0x040000 + + +/* Copied over from riowinif.h . This is ugly. The winif file declares +also much other stuff which is incompatible with the headers from +the older driver. The older driver includes "brates.h" which shadows +the definitions from Linux, and is incompatible... */ + +/* RxBaud and TxBaud definitions... */ +#define RIO_B0 0x00 /* RTS / DTR signals dropped */ +#define RIO_B50 0x01 /* 50 baud */ +#define RIO_B75 0x02 /* 75 baud */ +#define RIO_B110 0x03 /* 110 baud */ +#define RIO_B134 0x04 /* 134.5 baud */ +#define RIO_B150 0x05 /* 150 baud */ +#define RIO_B200 0x06 /* 200 baud */ +#define RIO_B300 0x07 /* 300 baud */ +#define RIO_B600 0x08 /* 600 baud */ +#define RIO_B1200 0x09 /* 1200 baud */ +#define RIO_B1800 0x0A /* 1800 baud */ +#define RIO_B2400 0x0B /* 2400 baud */ +#define RIO_B4800 0x0C /* 4800 baud */ +#define RIO_B9600 0x0D /* 9600 baud */ +#define RIO_B19200 0x0E /* 19200 baud */ +#define RIO_B38400 0x0F /* 38400 baud */ +#define RIO_B56000 0x10 /* 56000 baud */ +#define RIO_B57600 0x11 /* 57600 baud */ +#define RIO_B64000 0x12 /* 64000 baud */ +#define RIO_B115200 0x13 /* 115200 baud */ +#define RIO_B2000 0x14 /* 2000 baud */ diff --git a/drivers/staging/generic_serial/rio/map.h b/drivers/staging/generic_serial/rio/map.h new file mode 100644 index 000000000000..8366978578c1 --- /dev/null +++ b/drivers/staging/generic_serial/rio/map.h @@ -0,0 +1,98 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : map.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:11 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)map.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_map_h__ +#define __rio_map_h__ + +/* +** mapping structure passed to and from the config.rio program to +** determine the current topology of the world +*/ + +#define MAX_MAP_ENTRY 17 +#define TOTAL_MAP_ENTRIES (MAX_MAP_ENTRY*RIO_SLOTS) +#define MAX_NAME_LEN 32 + +struct Map { + unsigned int HostUniqueNum; /* Supporting hosts unique number */ + unsigned int RtaUniqueNum; /* Unique number */ + /* + ** The next two IDs must be swapped on big-endian architectures + ** when using a v2.04 /etc/rio/config with a v3.00 driver (when + ** upgrading for example). + */ + unsigned short ID; /* ID used in the subnet */ + unsigned short ID2; /* ID of 2nd block of 8 for 16 port */ + unsigned long Flags; /* Booted, ID Given, Disconnected */ + unsigned long SysPort; /* First tty mapped to this port */ + struct Top Topology[LINKS_PER_UNIT]; /* ID connected to each link */ + char Name[MAX_NAME_LEN]; /* Cute name by which RTA is known */ +}; + +/* +** Flag values: +*/ +#define RTA_BOOTED 0x00000001 +#define RTA_NEWBOOT 0x00000010 +#define MSG_DONE 0x00000020 +#define RTA_INTERCONNECT 0x00000040 +#define RTA16_SECOND_SLOT 0x00000080 +#define BEEN_HERE 0x00000100 +#define SLOT_TENTATIVE 0x40000000 +#define SLOT_IN_USE 0x80000000 + +/* +** HostUniqueNum is the unique number from the host card that this RTA +** is to be connected to. +** RtaUniqueNum is the unique number of the RTA concerned. It will be ZERO +** if the slot in the table is unused. If it is the same as the HostUniqueNum +** then this slot represents a host card. +** Flags contains current boot/route state info +** SysPort is a value in the range 0-504, being the number of the first tty +** on this RTA. Each RTA supports 8 ports. The SysPort value must be modulo 8. +** SysPort 0-127 correspond to /dev/ttyr001 to /dev/ttyr128, with minor +** numbers 0-127. SysPort 128-255 correspond to /dev/ttyr129 to /dev/ttyr256, +** again with minor numbers 0-127, and so on for SysPorts 256-383 and 384-511 +** ID will be in the range 0-16 for a `known' RTA. ID will be 0xFFFF for an +** unused slot/unknown ID etc. +** The Topology array contains the ID of the unit connected to each of the +** four links on this unit. The entry will be 0xFFFF if NOTHING is connected +** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link. +** The Name field is a null-terminated string, upto 31 characters, containing +** the 'cute' name that the sysadmin/users know the RTA by. It is permissible +** for this string to contain any character in the range \040 to \176 inclusive. +** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The +** special character '%' IS allowable, and needs no special action. +** +*/ + +#endif diff --git a/drivers/staging/generic_serial/rio/param.h b/drivers/staging/generic_serial/rio/param.h new file mode 100644 index 000000000000..7e9b6283e8aa --- /dev/null +++ b/drivers/staging/generic_serial/rio/param.h @@ -0,0 +1,55 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : param.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:12 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)param.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_param_h__ +#define __rio_param_h__ + +/* +** the param command block, as used in OPEN and PARAM calls. +*/ + +struct phb_param { + u8 Cmd; /* It is very important that these line up */ + u8 Cor1; /* with what is expected at the other end. */ + u8 Cor2; /* to confirm that you've got it right, */ + u8 Cor4; /* check with cirrus/cirrus.h */ + u8 Cor5; + u8 TxXon; /* Transmit X-On character */ + u8 TxXoff; /* Transmit X-Off character */ + u8 RxXon; /* Receive X-On character */ + u8 RxXoff; /* Receive X-Off character */ + u8 LNext; /* Literal-next character */ + u8 TxBaud; /* Transmit baudrate */ + u8 RxBaud; /* Receive baudrate */ +}; + +#endif diff --git a/drivers/staging/generic_serial/rio/parmmap.h b/drivers/staging/generic_serial/rio/parmmap.h new file mode 100644 index 000000000000..acc8fa439df5 --- /dev/null +++ b/drivers/staging/generic_serial/rio/parmmap.h @@ -0,0 +1,81 @@ +/**************************************************************************** + ******* ******* + ******* H O S T M E M O R Y M A P + ******* ******* + **************************************************************************** + + Author : Ian Nandhra / Jeremy Rolls + Date : + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- +6/4/1991 jonb Made changes to accommodate Mips R3230 bus + ***************************************************************************/ + +#ifndef _parmap_h +#define _parmap_h + +typedef struct PARM_MAP PARM_MAP; + +struct PARM_MAP { + u16 phb_ptr; /* Pointer to the PHB array */ + u16 phb_num_ptr; /* Ptr to Number of PHB's */ + u16 free_list; /* Free List pointer */ + u16 free_list_end; /* Free List End pointer */ + u16 q_free_list_ptr; /* Ptr to Q_BUF variable */ + u16 unit_id_ptr; /* Unit Id */ + u16 link_str_ptr; /* Link Structure Array */ + u16 bootloader_1; /* 1st Stage Boot Loader */ + u16 bootloader_2; /* 2nd Stage Boot Loader */ + u16 port_route_map_ptr; /* Port Route Map */ + u16 route_ptr; /* Unit Route Map */ + u16 map_present; /* Route Map present */ + s16 pkt_num; /* Total number of packets */ + s16 q_num; /* Total number of Q packets */ + u16 buffers_per_port; /* Number of buffers per port */ + u16 heap_size; /* Initial size of heap */ + u16 heap_left; /* Current Heap left */ + u16 error; /* Error code */ + u16 tx_max; /* Max number of tx pkts per phb */ + u16 rx_max; /* Max number of rx pkts per phb */ + u16 rx_limit; /* For high / low watermarks */ + s16 links; /* Links to use */ + s16 timer; /* Interrupts per second */ + u16 rups; /* Pointer to the RUPs */ + u16 max_phb; /* Mostly for debugging */ + u16 living; /* Just increments!! */ + u16 init_done; /* Initialisation over */ + u16 booting_link; + u16 idle_count; /* Idle time counter */ + u16 busy_count; /* Busy counter */ + u16 idle_control; /* Control Idle Process */ + u16 tx_intr; /* TX interrupt pending */ + u16 rx_intr; /* RX interrupt pending */ + u16 rup_intr; /* RUP interrupt pending */ +}; + +#endif + +/*********** end of file ***********/ diff --git a/drivers/staging/generic_serial/rio/pci.h b/drivers/staging/generic_serial/rio/pci.h new file mode 100644 index 000000000000..6032f9135956 --- /dev/null +++ b/drivers/staging/generic_serial/rio/pci.h @@ -0,0 +1,72 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : pci.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:12 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)pci.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_pci_h__ +#define __rio_pci_h__ + +/* +** PCI stuff +*/ + +#define PCITpFastClock 0x80 +#define PCITpSlowClock 0x00 +#define PCITpFastLinks 0x40 +#define PCITpSlowLinks 0x00 +#define PCITpIntEnable 0x04 +#define PCITpIntDisable 0x00 +#define PCITpBusEnable 0x02 +#define PCITpBusDisable 0x00 +#define PCITpBootFromRam 0x01 +#define PCITpBootFromLink 0x00 + +#define RIO_PCI_VENDOR 0x11CB +#define RIO_PCI_DEVICE 0x8000 +#define RIO_PCI_BASE_CLASS 0x02 +#define RIO_PCI_SUB_CLASS 0x80 +#define RIO_PCI_PROG_IFACE 0x00 + +#define RIO_PCI_RID 0x0008 +#define RIO_PCI_BADR0 0x0010 +#define RIO_PCI_INTLN 0x003C +#define RIO_PCI_INTPIN 0x003D + +#define RIO_PCI_MEM_SIZE 65536 + +#define RIO_PCI_TURBO_TP 0x80 +#define RIO_PCI_FAST_LINKS 0x40 +#define RIO_PCI_INT_ENABLE 0x04 +#define RIO_PCI_TP_BUS_ENABLE 0x02 +#define RIO_PCI_BOOT_FROM_RAM 0x01 + +#define RIO_PCI_DEFAULT_MODE 0x05 + +#endif /* __rio_pci_h__ */ diff --git a/drivers/staging/generic_serial/rio/phb.h b/drivers/staging/generic_serial/rio/phb.h new file mode 100644 index 000000000000..a4c48ae4e365 --- /dev/null +++ b/drivers/staging/generic_serial/rio/phb.h @@ -0,0 +1,142 @@ +/**************************************************************************** + ******* ******* + ******* P H B H E A D E R ******* + ******* ******* + **************************************************************************** + + Author : Ian Nandhra, Jeremy Rolls + Date : + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- + + ***************************************************************************/ + +#ifndef _phb_h +#define _phb_h 1 + +/************************************************* + * Handshake asserted. Deasserted by the LTT(s) + ************************************************/ +#define PHB_HANDSHAKE_SET ((ushort) 0x001) /* Set by LRT */ + +#define PHB_HANDSHAKE_RESET ((ushort) 0x002) /* Set by ISR / driver */ + +#define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET | PHB_HANDSHAKE_SET) + /* Reset by ltt */ + + +/************************************************* + * Maximum number of PHB's + ************************************************/ +#define MAX_PHB ((ushort) 128) /* range 0-127 */ + +/************************************************* + * Defines for the mode fields + ************************************************/ +#define TXPKT_INCOMPLETE 0x0001 /* Previous tx packet not completed */ +#define TXINTR_ENABLED 0x0002 /* Tx interrupt is enabled */ +#define TX_TAB3 0x0004 /* TAB3 mode */ +#define TX_OCRNL 0x0008 /* OCRNL mode */ +#define TX_ONLCR 0x0010 /* ONLCR mode */ +#define TX_SENDSPACES 0x0020 /* Send n spaces command needs + completing */ +#define TX_SENDNULL 0x0040 /* Escaping NULL needs completing */ +#define TX_SENDLF 0x0080 /* LF -> CR LF needs completing */ +#define TX_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel + port */ +#define TX_HANGOVER (TX_SENDSPACES | TX_SENDLF | TX_SENDNULL) +#define TX_DTRFLOW 0x0200 /* DTR tx flow control */ +#define TX_DTRFLOWED 0x0400 /* DTR is low - don't allow more data + into the FIFO */ +#define TX_DATAINFIFO 0x0800 /* There is data in the FIFO */ +#define TX_BUSY 0x1000 /* Data in FIFO, shift or holding regs */ + +#define RX_SPARE 0x0001 /* SPARE */ +#define RXINTR_ENABLED 0x0002 /* Rx interrupt enabled */ +#define RX_ICRNL 0x0008 /* ICRNL mode */ +#define RX_INLCR 0x0010 /* INLCR mode */ +#define RX_IGNCR 0x0020 /* IGNCR mode */ +#define RX_CTSFLOW 0x0040 /* CTSFLOW enabled */ +#define RX_IXOFF 0x0080 /* IXOFF enabled */ +#define RX_CTSFLOWED 0x0100 /* CTSFLOW and CTS dropped */ +#define RX_IXOFFED 0x0200 /* IXOFF and xoff sent */ +#define RX_BUFFERED 0x0400 /* Try and pass on complete packets */ + +#define PORT_ISOPEN 0x0001 /* Port open? */ +#define PORT_HUPCL 0x0002 /* Hangup on close? */ +#define PORT_MOPENPEND 0x0004 /* Modem open pending */ +#define PORT_ISPARALLEL 0x0008 /* Parallel port */ +#define PORT_BREAK 0x0010 /* Port on break */ +#define PORT_STATUSPEND 0x0020 /* Status packet pending */ +#define PORT_BREAKPEND 0x0040 /* Break packet pending */ +#define PORT_MODEMPEND 0x0080 /* Modem status packet pending */ +#define PORT_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel + port */ +#define PORT_FULLMODEM 0x0200 /* Full modem signals */ +#define PORT_RJ45 0x0400 /* RJ45 connector - no RI signal */ +#define PORT_RESTRICTED 0x0600 /* Restricted connector - no RI / DTR */ + +#define PORT_MODEMBITS 0x0600 /* Mask for modem fields */ + +#define PORT_WCLOSE 0x0800 /* Waiting for close */ +#define PORT_HANDSHAKEFIX 0x1000 /* Port has H/W flow control fix */ +#define PORT_WASPCLOSED 0x2000 /* Port closed with PCLOSE */ +#define DUMPMODE 0x4000 /* Dump RTA mem */ +#define READ_REG 0x8000 /* Read CD1400 register */ + + + +/************************************************************************** + * PHB Structure + * A few words. + * + * Normally Packets are added to the end of the list and removed from + * the start. The pointer tx_add points to a SPACE to put a Packet. + * The pointer tx_remove points to the next Packet to remove + *************************************************************************/ + +struct PHB { + u8 source; + u8 handshake; + u8 status; + u16 timeout; /* Maximum of 1.9 seconds */ + u8 link; /* Send down this link */ + u8 destination; + u16 tx_start; + u16 tx_end; + u16 tx_add; + u16 tx_remove; + + u16 rx_start; + u16 rx_end; + u16 rx_add; + u16 rx_remove; + +}; + +#endif + +/*********** end of file ***********/ diff --git a/drivers/staging/generic_serial/rio/pkt.h b/drivers/staging/generic_serial/rio/pkt.h new file mode 100644 index 000000000000..a9458164f02f --- /dev/null +++ b/drivers/staging/generic_serial/rio/pkt.h @@ -0,0 +1,77 @@ +/**************************************************************************** + ******* ******* + ******* P A C K E T H E A D E R F I L E + ******* ******* + **************************************************************************** + + Author : Ian Nandhra / Jeremy Rolls + Date : + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- + + ***************************************************************************/ + +#ifndef _pkt_h +#define _pkt_h 1 + +#define PKT_CMD_BIT ((ushort) 0x080) +#define PKT_CMD_DATA ((ushort) 0x080) + +#define PKT_ACK ((ushort) 0x040) + +#define PKT_TGL ((ushort) 0x020) + +#define PKT_LEN_MASK ((ushort) 0x07f) + +#define DATA_WNDW ((ushort) 0x10) +#define PKT_TTL_MASK ((ushort) 0x0f) + +#define PKT_MAX_DATA_LEN 72 + +#define PKT_LENGTH sizeof(struct PKT) +#define SYNC_PKT_LENGTH (PKT_LENGTH + 4) + +#define CONTROL_PKT_LEN_MASK PKT_LEN_MASK +#define CONTROL_PKT_CMD_BIT PKT_CMD_BIT +#define CONTROL_PKT_ACK (PKT_ACK << 8) +#define CONTROL_PKT_TGL (PKT_TGL << 8) +#define CONTROL_PKT_TTL_MASK (PKT_TTL_MASK << 8) +#define CONTROL_DATA_WNDW (DATA_WNDW << 8) + +struct PKT { + u8 dest_unit; /* Destination Unit Id */ + u8 dest_port; /* Destination POrt */ + u8 src_unit; /* Source Unit Id */ + u8 src_port; /* Source POrt */ + u8 len; + u8 control; + u8 data[PKT_MAX_DATA_LEN]; + /* Actual data :-) */ + u16 csum; /* C-SUM */ +}; +#endif + +/*********** end of file ***********/ diff --git a/drivers/staging/generic_serial/rio/port.h b/drivers/staging/generic_serial/rio/port.h new file mode 100644 index 000000000000..49cf6d15ee54 --- /dev/null +++ b/drivers/staging/generic_serial/rio/port.h @@ -0,0 +1,179 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : port.h +** SID : 1.3 +** Last Modified : 11/6/98 11:34:12 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)port.h 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_port_h__ +#define __rio_port_h__ + +/* +** Port data structure +*/ +struct Port { + struct gs_port gs; + int PortNum; /* RIO port no., 0-511 */ + struct Host *HostP; + void __iomem *Caddr; + unsigned short HostPort; /* Port number on host card */ + unsigned char RupNum; /* Number of RUP for port */ + unsigned char ID2; /* Second ID of RTA for port */ + unsigned long State; /* FLAGS for open & xopen */ +#define RIO_LOPEN 0x00001 /* Local open */ +#define RIO_MOPEN 0x00002 /* Modem open */ +#define RIO_WOPEN 0x00004 /* Waiting for open */ +#define RIO_CLOSING 0x00008 /* The port is being close */ +#define RIO_XPBUSY 0x00010 /* Transparent printer busy */ +#define RIO_BREAKING 0x00020 /* Break in progress */ +#define RIO_DIRECT 0x00040 /* Doing Direct output */ +#define RIO_EXCLUSIVE 0x00080 /* Stream open for exclusive use */ +#define RIO_NDELAY 0x00100 /* Stream is open FNDELAY */ +#define RIO_CARR_ON 0x00200 /* Stream has carrier present */ +#define RIO_XPWANTR 0x00400 /* Stream wanted by Xprint */ +#define RIO_RBLK 0x00800 /* Stream is read-blocked */ +#define RIO_BUSY 0x01000 /* Stream is BUSY for write */ +#define RIO_TIMEOUT 0x02000 /* Stream timeout in progress */ +#define RIO_TXSTOP 0x04000 /* Stream output is stopped */ +#define RIO_WAITFLUSH 0x08000 /* Stream waiting for flush */ +#define RIO_DYNOROD 0x10000 /* Drain failed */ +#define RIO_DELETED 0x20000 /* RTA has been deleted */ +#define RIO_ISSCANCODE 0x40000 /* This line is in scancode mode */ +#define RIO_USING_EUC 0x100000 /* Using extended Unix chars */ +#define RIO_CAN_COOK 0x200000 /* This line can do cooking */ +#define RIO_TRIAD_MODE 0x400000 /* Enable TRIAD special ops. */ +#define RIO_TRIAD_BLOCK 0x800000 /* Next read will block */ +#define RIO_TRIAD_FUNC 0x1000000 /* Seen a function key coming in */ +#define RIO_THROTTLE_RX 0x2000000 /* RX needs to be throttled. */ + + unsigned long Config; /* FLAGS for NOREAD.... */ +#define RIO_NOREAD 0x0001 /* Are not allowed to read port */ +#define RIO_NOWRITE 0x0002 /* Are not allowed to write port */ +#define RIO_NOXPRINT 0x0004 /* Are not allowed to xprint port */ +#define RIO_NOMASK 0x0007 /* All not allowed things */ +#define RIO_IXANY 0x0008 /* Port is allowed ixany */ +#define RIO_MODEM 0x0010 /* Stream is a modem device */ +#define RIO_IXON 0x0020 /* Port is allowed ixon */ +#define RIO_WAITDRAIN 0x0040 /* Wait for port to completely drain */ +#define RIO_MAP_50_TO_50 0x0080 /* Map 50 baud to 50 baud */ +#define RIO_MAP_110_TO_110 0x0100 /* Map 110 baud to 110 baud */ + +/* +** 15.10.1998 ARG - ESIL 0761 prt fix +** As LynxOS does not appear to support Hardware Flow Control ..... +** Define our own flow control flags in 'Config'. +*/ +#define RIO_CTSFLOW 0x0200 /* RIO's own CTSFLOW flag */ +#define RIO_RTSFLOW 0x0400 /* RIO's own RTSFLOW flag */ + + + struct PHB __iomem *PhbP; /* pointer to PHB for port */ + u16 __iomem *TxAdd; /* Add packets here */ + u16 __iomem *TxStart; /* Start of add array */ + u16 __iomem *TxEnd; /* End of add array */ + u16 __iomem *RxRemove; /* Remove packets here */ + u16 __iomem *RxStart; /* Start of remove array */ + u16 __iomem *RxEnd; /* End of remove array */ + unsigned int RtaUniqueNum; /* Unique number of RTA */ + unsigned short PortState; /* status of port */ + unsigned short ModemState; /* status of modem lines */ + unsigned long ModemLines; /* Modem bits sent to RTA */ + unsigned char CookMode; /* who expands CR/LF? */ + unsigned char ParamSem; /* Prevent write during param */ + unsigned char Mapped; /* if port mapped onto host */ + unsigned char SecondBlock; /* if port belongs to 2nd block + of 16 port RTA */ + unsigned char InUse; /* how many pre-emptive cmds */ + unsigned char Lock; /* if params locked */ + unsigned char Store; /* if params stored across closes */ + unsigned char FirstOpen; /* TRUE if first time port opened */ + unsigned char FlushCmdBodge; /* if doing a (non)flush */ + unsigned char MagicFlags; /* require intr processing */ +#define MAGIC_FLUSH 0x01 /* mirror of WflushFlag */ +#define MAGIC_REBOOT 0x02 /* RTA re-booted, re-open ports */ +#define MORE_OUTPUT_EYGOR 0x04 /* riotproc failed to empty clists */ + unsigned char WflushFlag; /* 1 How many WFLUSHs active */ +/* +** Transparent print stuff +*/ + struct Xprint { +#ifndef MAX_XP_CTRL_LEN +#define MAX_XP_CTRL_LEN 16 /* ALSO IN DAEMON.H */ +#endif + unsigned int XpCps; + char XpOn[MAX_XP_CTRL_LEN]; + char XpOff[MAX_XP_CTRL_LEN]; + unsigned short XpLen; /* strlen(XpOn)+strlen(XpOff) */ + unsigned char XpActive; + unsigned char XpLastTickOk; /* TRUE if we can process */ +#define XP_OPEN 00001 +#define XP_RUNABLE 00002 + struct ttystatics *XttyP; + } Xprint; + unsigned char RxDataStart; + unsigned char Cor2Copy; /* copy of COR2 */ + char *Name; /* points to the Rta's name */ + char *TxRingBuffer; + unsigned short TxBufferIn; /* New data arrives here */ + unsigned short TxBufferOut; /* Intr removes data here */ + unsigned short OldTxBufferOut; /* Indicates if draining */ + int TimeoutId; /* Timeout ID */ + unsigned int Debug; + unsigned char WaitUntilBooted; /* True if open should block */ + unsigned int statsGather; /* True if gathering stats */ + unsigned long txchars; /* Chars transmitted */ + unsigned long rxchars; /* Chars received */ + unsigned long opens; /* port open count */ + unsigned long closes; /* port close count */ + unsigned long ioctls; /* ioctl count */ + unsigned char LastRxTgl; /* Last state of rx toggle bit */ + spinlock_t portSem; /* Lock using this sem */ + int MonitorTstate; /* Monitoring ? */ + int timeout_id; /* For calling 100 ms delays */ + int timeout_sem; /* For calling 100 ms delays */ + int firstOpen; /* First time open ? */ + char *p; /* save the global struc here .. */ +}; + +struct ModuleInfo { + char *Name; + unsigned int Flags[4]; /* one per port on a module */ +}; + +/* +** This struct is required because trying to grab an entire Port structure +** runs into problems with differing struct sizes between driver and config. +*/ +struct PortParams { + unsigned int Port; + unsigned long Config; + unsigned long State; + struct ttystatics *TtyP; +}; + +#endif diff --git a/drivers/staging/generic_serial/rio/protsts.h b/drivers/staging/generic_serial/rio/protsts.h new file mode 100644 index 000000000000..8ab79401d3ee --- /dev/null +++ b/drivers/staging/generic_serial/rio/protsts.h @@ -0,0 +1,110 @@ +/**************************************************************************** + ******* ******* + ******* P R O T O C O L S T A T U S S T R U C T U R E ******* + ******* ******* + **************************************************************************** + + Author : Ian Nandhra / Jeremy Rolls + Date : + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- + + ***************************************************************************/ + +#ifndef _protsts_h +#define _protsts_h 1 + +/************************************************* + * ACK bit. Last Packet received OK. Set by + * rxpkt to indicate that the Packet has been + * received OK and that the LTT must set the ACK + * bit in the next outward bound Packet + * and re-set by LTT's after xmit. + * + * Gets shoved into rx_status + ************************************************/ +#define PHB_RX_LAST_PKT_ACKED ((ushort) 0x080) + +/******************************************************* + * The Rx TOGGLE bit. + * Stuffed into rx_status by RXPKT + ******************************************************/ +#define PHB_RX_DATA_WNDW ((ushort) 0x040) + +/******************************************************* + * The Rx TOGGLE bit. Matches the setting in PKT.H + * Stuffed into rx_status + ******************************************************/ +#define PHB_RX_TGL ((ushort) 0x2000) + + +/************************************************* + * This bit is set by the LRT to indicate that + * an ACK (packet) must be returned. + * + * Gets shoved into tx_status + ************************************************/ +#define PHB_TX_SEND_PKT_ACK ((ushort) 0x08) + +/************************************************* + * Set by LTT to indicate that an ACK is required + *************************************************/ +#define PHB_TX_ACK_RQRD ((ushort) 0x01) + + +/******************************************************* + * The Tx TOGGLE bit. + * Stuffed into tx_status by RXPKT from the PKT WndW + * field. Looked by the LTT when the NEXT Packet + * is going to be sent. + ******************************************************/ +#define PHB_TX_DATA_WNDW ((ushort) 0x04) + + +/******************************************************* + * The Tx TOGGLE bit. Matches the setting in PKT.H + * Stuffed into tx_status + ******************************************************/ +#define PHB_TX_TGL ((ushort) 0x02) + +/******************************************************* + * Request intr bit. Set when the queue has gone quiet + * and the PHB has requested an interrupt. + ******************************************************/ +#define PHB_TX_INTR ((ushort) 0x100) + +/******************************************************* + * SET if the PHB cannot send any more data down the + * Link + ******************************************************/ +#define PHB_TX_HANDSHAKE ((ushort) 0x010) + + +#define RUP_SEND_WNDW ((ushort) 0x08) ; + +#endif + +/*********** end of file ***********/ diff --git a/drivers/staging/generic_serial/rio/rio.h b/drivers/staging/generic_serial/rio/rio.h new file mode 100644 index 000000000000..1bf36223a4e8 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rio.h @@ -0,0 +1,208 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 1998 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rio.h +** SID : 1.3 +** Last Modified : 11/6/98 11:34:13 +** Retrieved : 11/6/98 11:34:22 +** +** ident @(#)rio.h 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_rio_h__ +#define __rio_rio_h__ + +/* +** Maximum numbers of things +*/ +#define RIO_SLOTS 4 /* number of configuration slots */ +#define RIO_HOSTS 4 /* number of hosts that can be found */ +#define PORTS_PER_HOST 128 /* number of ports per host */ +#define LINKS_PER_UNIT 4 /* number of links from a host */ +#define RIO_PORTS (PORTS_PER_HOST * RIO_HOSTS) /* max. no. of ports */ +#define RTAS_PER_HOST (MAX_RUP) /* number of RTAs per host */ +#define PORTS_PER_RTA (PORTS_PER_HOST/RTAS_PER_HOST) /* ports on a rta */ +#define PORTS_PER_MODULE 4 /* number of ports on a plug-in module */ + /* number of modules on an RTA */ +#define MODULES_PER_RTA (PORTS_PER_RTA/PORTS_PER_MODULE) +#define MAX_PRODUCT 16 /* numbr of different product codes */ +#define MAX_MODULE_TYPES 16 /* number of different types of module */ + +#define RIO_CONTROL_DEV 128 /* minor number of host/control device */ +#define RIO_INVALID_MAJOR 0 /* test first host card's major no for validity */ + +/* +** number of RTAs that can be bound to a master +*/ +#define MAX_RTA_BINDINGS (MAX_RUP * RIO_HOSTS) + +/* +** Unit types +*/ +#define PC_RTA16 0x90000000 +#define PC_RTA8 0xe0000000 +#define TYPE_HOST 0 +#define TYPE_RTA8 1 +#define TYPE_RTA16 2 + +/* +** Flag values returned by functions +*/ + +#define RIO_FAIL -1 + +/* +** SysPort value for something that hasn't any ports +*/ +#define NO_PORT 0xFFFFFFFF + +/* +** Unit ID Of all hosts +*/ +#define HOST_ID 0 + +/* +** Break bytes into nybles +*/ +#define LONYBLE(X) ((X) & 0xF) +#define HINYBLE(X) (((X)>>4) & 0xF) + +/* +** Flag values passed into some functions +*/ +#define DONT_SLEEP 0 +#define OK_TO_SLEEP 1 + +#define DONT_PRINT 1 +#define DO_PRINT 0 + +#define PRINT_TO_LOG_CONS 0 +#define PRINT_TO_CONS 1 +#define PRINT_TO_LOG 2 + +/* +** Timeout has trouble with times of less than 3 ticks... +*/ +#define MIN_TIMEOUT 3 + +/* +** Generally useful constants +*/ + +#define HUNDRED_MS ((HZ/10)?(HZ/10):1) +#define ONE_MEG 0x100000 +#define SIXTY_FOUR_K 0x10000 + +#define RIO_AT_MEM_SIZE SIXTY_FOUR_K +#define RIO_EISA_MEM_SIZE SIXTY_FOUR_K +#define RIO_MCA_MEM_SIZE SIXTY_FOUR_K + +#define COOK_WELL 0 +#define COOK_MEDIUM 1 +#define COOK_RAW 2 + +/* +** Pointer manipulation stuff +** RIO_PTR takes hostp->Caddr and the offset into the DP RAM area +** and produces a UNIX caddr_t (pointer) to the object +** RIO_OBJ takes hostp->Caddr and a UNIX pointer to an object and +** returns the offset into the DP RAM area. +*/ +#define RIO_PTR(C,O) (((unsigned char __iomem *)(C))+(0xFFFF&(O))) +#define RIO_OFF(C,O) ((unsigned char __iomem *)(O)-(unsigned char __iomem *)(C)) + +/* +** How to convert from various different device number formats: +** DEV is a dev number, as passed to open, close etc - NOT a minor +** number! +**/ + +#define RIO_MODEM_MASK 0x1FF +#define RIO_MODEM_BIT 0x200 +#define RIO_UNMODEM(DEV) (MINOR(DEV) & RIO_MODEM_MASK) +#define RIO_ISMODEM(DEV) (MINOR(DEV) & RIO_MODEM_BIT) +#define RIO_PORT(DEV,FIRST_MAJ) ( (MAJOR(DEV) - FIRST_MAJ) * PORTS_PER_HOST) \ + + MINOR(DEV) +#define CSUM(pkt_ptr) (((u16 *)(pkt_ptr))[0] + ((u16 *)(pkt_ptr))[1] + \ + ((u16 *)(pkt_ptr))[2] + ((u16 *)(pkt_ptr))[3] + \ + ((u16 *)(pkt_ptr))[4] + ((u16 *)(pkt_ptr))[5] + \ + ((u16 *)(pkt_ptr))[6] + ((u16 *)(pkt_ptr))[7] + \ + ((u16 *)(pkt_ptr))[8] + ((u16 *)(pkt_ptr))[9] ) + +#define RIO_LINK_ENABLE 0x80FF /* FF is a hack, mainly for Mips, to */ + /* prevent a really stupid race condition. */ + +#define NOT_INITIALISED 0 +#define INITIALISED 1 + +#define NOT_POLLING 0 +#define POLLING 1 + +#define NOT_CHANGED 0 +#define CHANGED 1 + +#define NOT_INUSE 0 + +#define DISCONNECT 0 +#define CONNECT 1 + +/* ------ Control Codes ------ */ + +#define CONTROL '^' +#define IFOAD ( CONTROL + 1 ) +#define IDENTIFY ( CONTROL + 2 ) +#define ZOMBIE ( CONTROL + 3 ) +#define UFOAD ( CONTROL + 4 ) +#define IWAIT ( CONTROL + 5 ) + +#define IFOAD_MAGIC 0xF0AD /* of course */ +#define ZOMBIE_MAGIC (~0xDEAD) /* not dead -> zombie */ +#define UFOAD_MAGIC 0xD1E /* kill-your-neighbour */ +#define IWAIT_MAGIC 0xB1DE /* Bide your time */ + +/* ------ Error Codes ------ */ + +#define E_NO_ERROR ((ushort) 0) + +/* ------ Free Lists ------ */ + +struct rio_free_list { + u16 next; + u16 prev; +}; + +/* NULL for card side linked lists */ +#define TPNULL ((ushort)(0x8000)) +/* We can add another packet to a transmit queue if the packet pointer pointed + * to by the TxAdd pointer has PKT_IN_USE clear in its address. */ +#define PKT_IN_USE 0x1 + +/* ------ Topology ------ */ + +struct Top { + u8 Unit; + u8 Link; +}; + +#endif /* __rio_h__ */ diff --git a/drivers/staging/generic_serial/rio/rio_linux.c b/drivers/staging/generic_serial/rio/rio_linux.c new file mode 100644 index 000000000000..5e33293d24e3 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rio_linux.c @@ -0,0 +1,1204 @@ + +/* rio_linux.c -- Linux driver for the Specialix RIO series cards. + * + * + * (C) 1999 R.E.Wolff@BitWizard.nl + * + * Specialix pays for the development and support of this driver. + * Please DO contact support@specialix.co.uk if you require + * support. But please read the documentation (rio.txt) first. + * + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "linux_compat.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" +#include "rioioctl.h" +#include "param.h" +#include "protsts.h" +#include "rioboard.h" + + +#include "rio_linux.h" + +/* I don't think that this driver can handle more than 512 ports on +one machine. Specialix specifies max 4 boards in one machine. I don't +know why. If you want to try anyway you'll have to increase the number +of boards in rio.h. You'll have to allocate more majors if you need +more than 512 ports.... */ + +#ifndef RIO_NORMAL_MAJOR0 +/* This allows overriding on the compiler commandline, or in a "major.h" + include or something like that */ +#define RIO_NORMAL_MAJOR0 154 +#define RIO_NORMAL_MAJOR1 156 +#endif + +#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 +#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000 +#endif + +#ifndef RIO_WINDOW_LEN +#define RIO_WINDOW_LEN 0x10000 +#endif + + +/* Configurable options: + (Don't be too sure that it'll work if you toggle them) */ + +/* Am I paranoid or not ? ;-) */ +#undef RIO_PARANOIA_CHECK + + +/* 20 -> 2000 per second. The card should rate-limit interrupts at 1000 + Hz, but it is user configurable. I don't recommend going above 1000 + Hz. The interrupt ratelimit might trigger if the interrupt is + shared with a very active other device. + undef this if you want to disable the check.... +*/ +#define IRQ_RATE_LIMIT 200 + + +/* These constants are derived from SCO Source */ +static DEFINE_MUTEX(rio_fw_mutex); +static struct Conf + RIOConf = { + /* locator */ "RIO Config here", + /* startuptime */ HZ * 2, + /* how long to wait for card to run */ + /* slowcook */ 0, + /* TRUE -> always use line disc. */ + /* intrpolltime */ 1, + /* The frequency of OUR polls */ + /* breakinterval */ 25, + /* x10 mS XXX: units seem to be 1ms not 10! -- REW */ + /* timer */ 10, + /* mS */ + /* RtaLoadBase */ 0x7000, + /* HostLoadBase */ 0x7C00, + /* XpHz */ 5, + /* number of Xprint hits per second */ + /* XpCps */ 120, + /* Xprint characters per second */ + /* XpOn */ "\033d#", + /* start Xprint for a wyse 60 */ + /* XpOff */ "\024", + /* end Xprint for a wyse 60 */ + /* MaxXpCps */ 2000, + /* highest Xprint speed */ + /* MinXpCps */ 10, + /* slowest Xprint speed */ + /* SpinCmds */ 1, + /* non-zero for mega fast boots */ + /* First Addr */ 0x0A0000, + /* First address to look at */ + /* Last Addr */ 0xFF0000, + /* Last address looked at */ + /* BufferSize */ 1024, + /* Bytes per port of buffering */ + /* LowWater */ 256, + /* how much data left before wakeup */ + /* LineLength */ 80, + /* how wide is the console? */ + /* CmdTimeout */ HZ, + /* how long a close command may take */ +}; + + + + +/* Function prototypes */ + +static void rio_disable_tx_interrupts(void *ptr); +static void rio_enable_tx_interrupts(void *ptr); +static void rio_disable_rx_interrupts(void *ptr); +static void rio_enable_rx_interrupts(void *ptr); +static int rio_carrier_raised(struct tty_port *port); +static void rio_shutdown_port(void *ptr); +static int rio_set_real_termios(void *ptr); +static void rio_hungup(void *ptr); +static void rio_close(void *ptr); +static int rio_chars_in_buffer(void *ptr); +static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); +static int rio_init_drivers(void); + +static void my_hd(void *addr, int len); + +static struct tty_driver *rio_driver, *rio_driver2; + +/* The name "p" is a bit non-descript. But that's what the rio-lynxos +sources use all over the place. */ +struct rio_info *p; + +int rio_debug; + + +/* You can have the driver poll your card. + - Set rio_poll to 1 to poll every timer tick (10ms on Intel). + This is used when the card cannot use an interrupt for some reason. +*/ +static int rio_poll = 1; + + +/* These are the only open spaces in my computer. Yours may have more + or less.... */ +static int rio_probe_addrs[] = { 0xc0000, 0xd0000, 0xe0000 }; + +#define NR_RIO_ADDRS ARRAY_SIZE(rio_probe_addrs) + + +/* Set the mask to all-ones. This alas, only supports 32 interrupts. + Some architectures may need more. -- Changed to LONG to + support up to 64 bits on 64bit architectures. -- REW 20/06/99 */ +static long rio_irqmask = -1; + +MODULE_AUTHOR("Rogier Wolff , Patrick van de Lageweg "); +MODULE_DESCRIPTION("RIO driver"); +MODULE_LICENSE("GPL"); +module_param(rio_poll, int, 0); +module_param(rio_debug, int, 0644); +module_param(rio_irqmask, long, 0); + +static struct real_driver rio_real_driver = { + rio_disable_tx_interrupts, + rio_enable_tx_interrupts, + rio_disable_rx_interrupts, + rio_enable_rx_interrupts, + rio_shutdown_port, + rio_set_real_termios, + rio_chars_in_buffer, + rio_close, + rio_hungup, + NULL +}; + +/* + * Firmware loader driver specific routines + * + */ + +static const struct file_operations rio_fw_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = rio_fw_ioctl, + .llseek = noop_llseek, +}; + +static struct miscdevice rio_fw_device = { + RIOCTL_MISC_MINOR, "rioctl", &rio_fw_fops +}; + + + + + +#ifdef RIO_PARANOIA_CHECK + +/* This doesn't work. Who's paranoid around here? Not me! */ + +static inline int rio_paranoia_check(struct rio_port const *port, char *name, const char *routine) +{ + + static const char *badmagic = KERN_ERR "rio: Warning: bad rio port magic number for device %s in %s\n"; + static const char *badinfo = KERN_ERR "rio: Warning: null rio port for device %s in %s\n"; + + if (!port) { + printk(badinfo, name, routine); + return 1; + } + if (port->magic != RIO_MAGIC) { + printk(badmagic, name, routine); + return 1; + } + + return 0; +} +#else +#define rio_paranoia_check(a,b,c) 0 +#endif + + +#ifdef DEBUG +static void my_hd(void *ad, int len) +{ + int i, j, ch; + unsigned char *addr = ad; + + for (i = 0; i < len; i += 16) { + rio_dprintk(RIO_DEBUG_PARAM, "%08lx ", (unsigned long) addr + i); + for (j = 0; j < 16; j++) { + rio_dprintk(RIO_DEBUG_PARAM, "%02x %s", addr[j + i], (j == 7) ? " " : ""); + } + for (j = 0; j < 16; j++) { + ch = addr[j + i]; + rio_dprintk(RIO_DEBUG_PARAM, "%c", (ch < 0x20) ? '.' : ((ch > 0x7f) ? '.' : ch)); + } + rio_dprintk(RIO_DEBUG_PARAM, "\n"); + } +} +#else +#define my_hd(ad,len) do{/* nothing*/ } while (0) +#endif + + +/* Delay a number of jiffies, allowing a signal to interrupt */ +int RIODelay(struct Port *PortP, int njiffies) +{ + func_enter(); + + rio_dprintk(RIO_DEBUG_DELAY, "delaying %d jiffies\n", njiffies); + msleep_interruptible(jiffies_to_msecs(njiffies)); + func_exit(); + + if (signal_pending(current)) + return RIO_FAIL; + else + return !RIO_FAIL; +} + + +/* Delay a number of jiffies, disallowing a signal to interrupt */ +int RIODelay_ni(struct Port *PortP, int njiffies) +{ + func_enter(); + + rio_dprintk(RIO_DEBUG_DELAY, "delaying %d jiffies (ni)\n", njiffies); + msleep(jiffies_to_msecs(njiffies)); + func_exit(); + return !RIO_FAIL; +} + +void rio_copy_to_card(void *from, void __iomem *to, int len) +{ + rio_copy_toio(to, from, len); +} + +int rio_minor(struct tty_struct *tty) +{ + return tty->index + ((tty->driver == rio_driver) ? 0 : 256); +} + +static int rio_set_real_termios(void *ptr) +{ + return RIOParam((struct Port *) ptr, RIOC_CONFIG, 1, 1); +} + + +static void rio_reset_interrupt(struct Host *HostP) +{ + func_enter(); + + switch (HostP->Type) { + case RIO_AT: + case RIO_MCA: + case RIO_PCI: + writeb(0xFF, &HostP->ResetInt); + } + + func_exit(); +} + + +static irqreturn_t rio_interrupt(int irq, void *ptr) +{ + struct Host *HostP; + func_enter(); + + HostP = ptr; /* &p->RIOHosts[(long)ptr]; */ + rio_dprintk(RIO_DEBUG_IFLOW, "rio: enter rio_interrupt (%d/%d)\n", irq, HostP->Ivec); + + /* AAargh! The order in which to do these things is essential and + not trivial. + + - hardware twiddling goes before "recursive". Otherwise when we + poll the card, and a recursive interrupt happens, we won't + ack the card, so it might keep on interrupting us. (especially + level sensitive interrupt systems like PCI). + + - Rate limit goes before hardware twiddling. Otherwise we won't + catch a card that has gone bonkers. + + - The "initialized" test goes after the hardware twiddling. Otherwise + the card will stick us in the interrupt routine again. + + - The initialized test goes before recursive. + */ + + rio_dprintk(RIO_DEBUG_IFLOW, "rio: We've have noticed the interrupt\n"); + if (HostP->Ivec == irq) { + /* Tell the card we've noticed the interrupt. */ + rio_reset_interrupt(HostP); + } + + if ((HostP->Flags & RUN_STATE) != RC_RUNNING) + return IRQ_HANDLED; + + if (test_and_set_bit(RIO_BOARD_INTR_LOCK, &HostP->locks)) { + printk(KERN_ERR "Recursive interrupt! (host %p/irq%d)\n", ptr, HostP->Ivec); + return IRQ_HANDLED; + } + + RIOServiceHost(p, HostP); + + rio_dprintk(RIO_DEBUG_IFLOW, "riointr() doing host %p type %d\n", ptr, HostP->Type); + + clear_bit(RIO_BOARD_INTR_LOCK, &HostP->locks); + rio_dprintk(RIO_DEBUG_IFLOW, "rio: exit rio_interrupt (%d/%d)\n", irq, HostP->Ivec); + func_exit(); + return IRQ_HANDLED; +} + + +static void rio_pollfunc(unsigned long data) +{ + func_enter(); + + rio_interrupt(0, &p->RIOHosts[data]); + mod_timer(&p->RIOHosts[data].timer, jiffies + rio_poll); + + func_exit(); +} + + +/* ********************************************************************** * + * Here are the routines that actually * + * interface with the generic_serial driver * + * ********************************************************************** */ + +/* Ehhm. I don't know how to fiddle with interrupts on the Specialix + cards. .... Hmm. Ok I figured it out. You don't. -- REW */ + +static void rio_disable_tx_interrupts(void *ptr) +{ + func_enter(); + + /* port->gs.port.flags &= ~GS_TX_INTEN; */ + + func_exit(); +} + + +static void rio_enable_tx_interrupts(void *ptr) +{ + struct Port *PortP = ptr; + /* int hn; */ + + func_enter(); + + /* hn = PortP->HostP - p->RIOHosts; + + rio_dprintk (RIO_DEBUG_TTY, "Pushing host %d\n", hn); + rio_interrupt (-1,(void *) hn, NULL); */ + + RIOTxEnable((char *) PortP); + + /* + * In general we cannot count on "tx empty" interrupts, although + * the interrupt routine seems to be able to tell the difference. + */ + PortP->gs.port.flags &= ~GS_TX_INTEN; + + func_exit(); +} + + +static void rio_disable_rx_interrupts(void *ptr) +{ + func_enter(); + func_exit(); +} + +static void rio_enable_rx_interrupts(void *ptr) +{ + /* struct rio_port *port = ptr; */ + func_enter(); + func_exit(); +} + + +/* Jeez. Isn't this simple? */ +static int rio_carrier_raised(struct tty_port *port) +{ + struct Port *PortP = container_of(port, struct Port, gs.port); + int rv; + + func_enter(); + rv = (PortP->ModemState & RIOC_MSVR1_CD) != 0; + + rio_dprintk(RIO_DEBUG_INIT, "Getting CD status: %d\n", rv); + + func_exit(); + return rv; +} + + +/* Jeez. Isn't this simple? Actually, we can sync with the actual port + by just pushing stuff into the queue going to the port... */ +static int rio_chars_in_buffer(void *ptr) +{ + func_enter(); + + func_exit(); + return 0; +} + + +/* Nothing special here... */ +static void rio_shutdown_port(void *ptr) +{ + struct Port *PortP; + + func_enter(); + + PortP = (struct Port *) ptr; + PortP->gs.port.tty = NULL; + func_exit(); +} + + +/* I haven't the foggiest why the decrement use count has to happen + here. The whole linux serial drivers stuff needs to be redesigned. + My guess is that this is a hack to minimize the impact of a bug + elsewhere. Thinking about it some more. (try it sometime) Try + running minicom on a serial port that is driven by a modularized + driver. Have the modem hangup. Then remove the driver module. Then + exit minicom. I expect an "oops". -- REW */ +static void rio_hungup(void *ptr) +{ + struct Port *PortP; + + func_enter(); + + PortP = (struct Port *) ptr; + PortP->gs.port.tty = NULL; + + func_exit(); +} + + +/* The standard serial_close would become shorter if you'd wrap it like + this. + rs_close (...){save_flags;cli;real_close();dec_use_count;restore_flags;} + */ +static void rio_close(void *ptr) +{ + struct Port *PortP; + + func_enter(); + + PortP = (struct Port *) ptr; + + riotclose(ptr); + + if (PortP->gs.port.count) { + printk(KERN_ERR "WARNING port count:%d\n", PortP->gs.port.count); + PortP->gs.port.count = 0; + } + + PortP->gs.port.tty = NULL; + func_exit(); +} + + + +static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + int rc = 0; + func_enter(); + + /* The "dev" argument isn't used. */ + mutex_lock(&rio_fw_mutex); + rc = riocontrol(p, 0, cmd, arg, capable(CAP_SYS_ADMIN)); + mutex_unlock(&rio_fw_mutex); + + func_exit(); + return rc; +} + +extern int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg); + +static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int rc; + struct Port *PortP; + int ival; + + func_enter(); + + PortP = (struct Port *) tty->driver_data; + + rc = 0; + switch (cmd) { + case TIOCSSOFTCAR: + if ((rc = get_user(ival, (unsigned __user *) argp)) == 0) { + tty->termios->c_cflag = (tty->termios->c_cflag & ~CLOCAL) | (ival ? CLOCAL : 0); + } + break; + case TIOCGSERIAL: + rc = -EFAULT; + if (access_ok(VERIFY_WRITE, argp, sizeof(struct serial_struct))) + rc = gs_getserial(&PortP->gs, argp); + break; + case TCSBRK: + if (PortP->State & RIO_DELETED) { + rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n"); + rc = -EIO; + } else { + if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2, 250) == + RIO_FAIL) { + rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n"); + rc = -EIO; + } + } + break; + case TCSBRKP: + if (PortP->State & RIO_DELETED) { + rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n"); + rc = -EIO; + } else { + int l; + l = arg ? arg * 100 : 250; + if (l > 255) + l = 255; + if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2, + arg ? arg * 100 : 250) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n"); + rc = -EIO; + } + } + break; + case TIOCSSERIAL: + rc = -EFAULT; + if (access_ok(VERIFY_READ, argp, sizeof(struct serial_struct))) + rc = gs_setserial(&PortP->gs, argp); + break; + default: + rc = -ENOIOCTLCMD; + break; + } + func_exit(); + return rc; +} + + +/* The throttle/unthrottle scheme for the Specialix card is different + * from other drivers and deserves some explanation. + * The Specialix hardware takes care of XON/XOFF + * and CTS/RTS flow control itself. This means that all we have to + * do when signalled by the upper tty layer to throttle/unthrottle is + * to make a note of it here. When we come to read characters from the + * rx buffers on the card (rio_receive_chars()) we look to see if the + * upper layer can accept more (as noted here in rio_rx_throt[]). + * If it can't we simply don't remove chars from the cards buffer. + * When the tty layer can accept chars, we again note that here and when + * rio_receive_chars() is called it will remove them from the cards buffer. + * The card will notice that a ports buffer has drained below some low + * water mark and will unflow control the line itself, using whatever + * flow control scheme is in use for that port. -- Simon Allen + */ + +static void rio_throttle(struct tty_struct *tty) +{ + struct Port *port = (struct Port *) tty->driver_data; + + func_enter(); + /* If the port is using any type of input flow + * control then throttle the port. + */ + + if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) { + port->State |= RIO_THROTTLE_RX; + } + + func_exit(); +} + + +static void rio_unthrottle(struct tty_struct *tty) +{ + struct Port *port = (struct Port *) tty->driver_data; + + func_enter(); + /* Always unthrottle even if flow control is not enabled on + * this port in case we disabled flow control while the port + * was throttled + */ + + port->State &= ~RIO_THROTTLE_RX; + + func_exit(); + return; +} + + + + + +/* ********************************************************************** * + * Here are the initialization routines. * + * ********************************************************************** */ + + +static struct vpd_prom *get_VPD_PROM(struct Host *hp) +{ + static struct vpd_prom vpdp; + char *p; + int i; + + func_enter(); + rio_dprintk(RIO_DEBUG_PROBE, "Going to verify vpd prom at %p.\n", hp->Caddr + RIO_VPD_ROM); + + p = (char *) &vpdp; + for (i = 0; i < sizeof(struct vpd_prom); i++) + *p++ = readb(hp->Caddr + RIO_VPD_ROM + i * 2); + /* read_rio_byte (hp, RIO_VPD_ROM + i*2); */ + + /* Terminate the identifier string. + *** requires one extra byte in struct vpd_prom *** */ + *p++ = 0; + + if (rio_debug & RIO_DEBUG_PROBE) + my_hd((char *) &vpdp, 0x20); + + func_exit(); + + return &vpdp; +} + +static const struct tty_operations rio_ops = { + .open = riotopen, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .chars_in_buffer = gs_chars_in_buffer, + .flush_buffer = gs_flush_buffer, + .ioctl = rio_ioctl, + .throttle = rio_throttle, + .unthrottle = rio_unthrottle, + .set_termios = gs_set_termios, + .stop = gs_stop, + .start = gs_start, + .hangup = gs_hangup, +}; + +static int rio_init_drivers(void) +{ + int error = -ENOMEM; + + rio_driver = alloc_tty_driver(256); + if (!rio_driver) + goto out; + rio_driver2 = alloc_tty_driver(256); + if (!rio_driver2) + goto out1; + + func_enter(); + + rio_driver->owner = THIS_MODULE; + rio_driver->driver_name = "specialix_rio"; + rio_driver->name = "ttySR"; + rio_driver->major = RIO_NORMAL_MAJOR0; + rio_driver->type = TTY_DRIVER_TYPE_SERIAL; + rio_driver->subtype = SERIAL_TYPE_NORMAL; + rio_driver->init_termios = tty_std_termios; + rio_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + rio_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(rio_driver, &rio_ops); + + rio_driver2->owner = THIS_MODULE; + rio_driver2->driver_name = "specialix_rio"; + rio_driver2->name = "ttySR"; + rio_driver2->major = RIO_NORMAL_MAJOR1; + rio_driver2->type = TTY_DRIVER_TYPE_SERIAL; + rio_driver2->subtype = SERIAL_TYPE_NORMAL; + rio_driver2->init_termios = tty_std_termios; + rio_driver2->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + rio_driver2->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(rio_driver2, &rio_ops); + + rio_dprintk(RIO_DEBUG_INIT, "set_termios = %p\n", gs_set_termios); + + if ((error = tty_register_driver(rio_driver))) + goto out2; + if ((error = tty_register_driver(rio_driver2))) + goto out3; + func_exit(); + return 0; + out3: + tty_unregister_driver(rio_driver); + out2: + put_tty_driver(rio_driver2); + out1: + put_tty_driver(rio_driver); + out: + printk(KERN_ERR "rio: Couldn't register a rio driver, error = %d\n", error); + return 1; +} + +static const struct tty_port_operations rio_port_ops = { + .carrier_raised = rio_carrier_raised, +}; + +static int rio_init_datastructures(void) +{ + int i; + struct Port *port; + func_enter(); + + /* Many drivers statically allocate the maximum number of ports + There is no reason not to allocate them dynamically. Is there? -- REW */ + /* However, the RIO driver allows users to configure their first + RTA as the ports numbered 504-511. We therefore need to allocate + the whole range. :-( -- REW */ + +#define RI_SZ sizeof(struct rio_info) +#define HOST_SZ sizeof(struct Host) +#define PORT_SZ sizeof(struct Port *) +#define TMIO_SZ sizeof(struct termios *) + rio_dprintk(RIO_DEBUG_INIT, "getting : %Zd %Zd %Zd %Zd %Zd bytes\n", RI_SZ, RIO_HOSTS * HOST_SZ, RIO_PORTS * PORT_SZ, RIO_PORTS * TMIO_SZ, RIO_PORTS * TMIO_SZ); + + if (!(p = kzalloc(RI_SZ, GFP_KERNEL))) + goto free0; + if (!(p->RIOHosts = kzalloc(RIO_HOSTS * HOST_SZ, GFP_KERNEL))) + goto free1; + if (!(p->RIOPortp = kzalloc(RIO_PORTS * PORT_SZ, GFP_KERNEL))) + goto free2; + p->RIOConf = RIOConf; + rio_dprintk(RIO_DEBUG_INIT, "Got : %p %p %p\n", p, p->RIOHosts, p->RIOPortp); + +#if 1 + for (i = 0; i < RIO_PORTS; i++) { + port = p->RIOPortp[i] = kzalloc(sizeof(struct Port), GFP_KERNEL); + if (!port) { + goto free6; + } + rio_dprintk(RIO_DEBUG_INIT, "initing port %d (%d)\n", i, port->Mapped); + tty_port_init(&port->gs.port); + port->gs.port.ops = &rio_port_ops; + port->PortNum = i; + port->gs.magic = RIO_MAGIC; + port->gs.close_delay = HZ / 2; + port->gs.closing_wait = 30 * HZ; + port->gs.rd = &rio_real_driver; + spin_lock_init(&port->portSem); + } +#else + /* We could postpone initializing them to when they are configured. */ +#endif + + + + if (rio_debug & RIO_DEBUG_INIT) { + my_hd(&rio_real_driver, sizeof(rio_real_driver)); + } + + + func_exit(); + return 0; + + free6:for (i--; i >= 0; i--) + kfree(p->RIOPortp[i]); +/*free5: + free4: + free3:*/ kfree(p->RIOPortp); + free2:kfree(p->RIOHosts); + free1: + rio_dprintk(RIO_DEBUG_INIT, "Not enough memory! %p %p %p\n", p, p->RIOHosts, p->RIOPortp); + kfree(p); + free0: + return -ENOMEM; +} + +static void __exit rio_release_drivers(void) +{ + func_enter(); + tty_unregister_driver(rio_driver2); + tty_unregister_driver(rio_driver); + put_tty_driver(rio_driver2); + put_tty_driver(rio_driver); + func_exit(); +} + + +#ifdef CONFIG_PCI + /* This was written for SX, but applies to RIO too... + (including bugs....) + + There is another bit besides Bit 17. Turning that bit off + (on boards shipped with the fix in the eeprom) results in a + hang on the next access to the card. + */ + + /******************************************************** + * Setting bit 17 in the CNTRL register of the PLX 9050 * + * chip forces a retry on writes while a read is pending.* + * This is to prevent the card locking up on Intel Xeon * + * multiprocessor systems with the NX chipset. -- NV * + ********************************************************/ + +/* Newer cards are produced with this bit set from the configuration + EEprom. As the bit is read/write for the CPU, we can fix it here, + if we detect that it isn't set correctly. -- REW */ + +static void fix_rio_pci(struct pci_dev *pdev) +{ + unsigned long hwbase; + unsigned char __iomem *rebase; + unsigned int t; + +#define CNTRL_REG_OFFSET 0x50 +#define CNTRL_REG_GOODVALUE 0x18260000 + + hwbase = pci_resource_start(pdev, 0); + rebase = ioremap(hwbase, 0x80); + t = readl(rebase + CNTRL_REG_OFFSET); + if (t != CNTRL_REG_GOODVALUE) { + printk(KERN_DEBUG "rio: performing cntrl reg fix: %08x -> %08x\n", t, CNTRL_REG_GOODVALUE); + writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET); + } + iounmap(rebase); +} +#endif + + +static int __init rio_init(void) +{ + int found = 0; + int i; + struct Host *hp; + int retval; + struct vpd_prom *vpdp; + int okboard; + +#ifdef CONFIG_PCI + struct pci_dev *pdev = NULL; + unsigned short tshort; +#endif + + func_enter(); + rio_dprintk(RIO_DEBUG_INIT, "Initing rio module... (rio_debug=%d)\n", rio_debug); + + if (abs((long) (&rio_debug) - rio_debug) < 0x10000) { + printk(KERN_WARNING "rio: rio_debug is an address, instead of a value. " "Assuming -1. Was %x/%p.\n", rio_debug, &rio_debug); + rio_debug = -1; + } + + if (misc_register(&rio_fw_device) < 0) { + printk(KERN_ERR "RIO: Unable to register firmware loader driver.\n"); + return -EIO; + } + + retval = rio_init_datastructures(); + if (retval < 0) { + misc_deregister(&rio_fw_device); + return retval; + } +#ifdef CONFIG_PCI + /* First look for the JET devices: */ + while ((pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, pdev))) { + u32 tint; + + if (pci_enable_device(pdev)) + continue; + + /* Specialix has a whole bunch of cards with + 0x2000 as the device ID. They say its because + the standard requires it. Stupid standard. */ + /* It seems that reading a word doesn't work reliably on 2.0. + Also, reading a non-aligned dword doesn't work. So we read the + whole dword at 0x2c and extract the word at 0x2e (SUBSYSTEM_ID) + ourselves */ + pci_read_config_dword(pdev, 0x2c, &tint); + tshort = (tint >> 16) & 0xffff; + rio_dprintk(RIO_DEBUG_PROBE, "Got a specialix card: %x.\n", tint); + if (tshort != 0x0100) { + rio_dprintk(RIO_DEBUG_PROBE, "But it's not a RIO card (%d)...\n", tshort); + continue; + } + rio_dprintk(RIO_DEBUG_PROBE, "cp1\n"); + + hp = &p->RIOHosts[p->RIONumHosts]; + hp->PaddrP = pci_resource_start(pdev, 2); + hp->Ivec = pdev->irq; + if (((1 << hp->Ivec) & rio_irqmask) == 0) + hp->Ivec = 0; + hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); + hp->CardP = (struct DpRam __iomem *) hp->Caddr; + hp->Type = RIO_PCI; + hp->Copy = rio_copy_to_card; + hp->Mode = RIO_PCI_BOOT_FROM_RAM; + spin_lock_init(&hp->HostLock); + rio_reset_interrupt(hp); + rio_start_card_running(hp); + + rio_dprintk(RIO_DEBUG_PROBE, "Going to test it (%p/%p).\n", (void *) p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr); + if (RIOBoardTest(p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr, RIO_PCI, 0) == 0) { + rio_dprintk(RIO_DEBUG_INIT, "Done RIOBoardTest\n"); + writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); + p->RIOHosts[p->RIONumHosts].UniqueNum = + ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0]) & 0xFF) << 0) | + ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24); + rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); + + fix_rio_pci(pdev); + + p->RIOHosts[p->RIONumHosts].pdev = pdev; + pci_dev_get(pdev); + + p->RIOLastPCISearch = 0; + p->RIONumHosts++; + found++; + } else { + iounmap(p->RIOHosts[p->RIONumHosts].Caddr); + p->RIOHosts[p->RIONumHosts].Caddr = NULL; + } + } + + /* Then look for the older PCI card.... : */ + + /* These older PCI cards have problems (only byte-mode access is + supported), which makes them a bit awkward to support. + They also have problems sharing interrupts. Be careful. + (The driver now refuses to share interrupts for these + cards. This should be sufficient). + */ + + /* Then look for the older RIO/PCI devices: */ + while ((pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_RIO, pdev))) { + if (pci_enable_device(pdev)) + continue; + +#ifdef CONFIG_RIO_OLDPCI + hp = &p->RIOHosts[p->RIONumHosts]; + hp->PaddrP = pci_resource_start(pdev, 0); + hp->Ivec = pdev->irq; + if (((1 << hp->Ivec) & rio_irqmask) == 0) + hp->Ivec = 0; + hp->Ivec |= 0x8000; /* Mark as non-sharable */ + hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); + hp->CardP = (struct DpRam __iomem *) hp->Caddr; + hp->Type = RIO_PCI; + hp->Copy = rio_copy_to_card; + hp->Mode = RIO_PCI_BOOT_FROM_RAM; + spin_lock_init(&hp->HostLock); + + rio_dprintk(RIO_DEBUG_PROBE, "Ivec: %x\n", hp->Ivec); + rio_dprintk(RIO_DEBUG_PROBE, "Mode: %x\n", hp->Mode); + + rio_reset_interrupt(hp); + rio_start_card_running(hp); + rio_dprintk(RIO_DEBUG_PROBE, "Going to test it (%p/%p).\n", (void *) p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr); + if (RIOBoardTest(p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr, RIO_PCI, 0) == 0) { + writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); + p->RIOHosts[p->RIONumHosts].UniqueNum = + ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0]) & 0xFF) << 0) | + ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24); + rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); + + p->RIOHosts[p->RIONumHosts].pdev = pdev; + pci_dev_get(pdev); + + p->RIOLastPCISearch = 0; + p->RIONumHosts++; + found++; + } else { + iounmap(p->RIOHosts[p->RIONumHosts].Caddr); + p->RIOHosts[p->RIONumHosts].Caddr = NULL; + } +#else + printk(KERN_ERR "Found an older RIO PCI card, but the driver is not " "compiled to support it.\n"); +#endif + } +#endif /* PCI */ + + /* Now probe for ISA cards... */ + for (i = 0; i < NR_RIO_ADDRS; i++) { + hp = &p->RIOHosts[p->RIONumHosts]; + hp->PaddrP = rio_probe_addrs[i]; + /* There was something about the IRQs of these cards. 'Forget what.--REW */ + hp->Ivec = 0; + hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); + hp->CardP = (struct DpRam __iomem *) hp->Caddr; + hp->Type = RIO_AT; + hp->Copy = rio_copy_to_card; /* AT card PCI???? - PVDL + * -- YES! this is now a normal copy. Only the + * old PCI card uses the special PCI copy. + * Moreover, the ISA card will work with the + * special PCI copy anyway. -- REW */ + hp->Mode = 0; + spin_lock_init(&hp->HostLock); + + vpdp = get_VPD_PROM(hp); + rio_dprintk(RIO_DEBUG_PROBE, "Got VPD ROM\n"); + okboard = 0; + if ((strncmp(vpdp->identifier, RIO_ISA_IDENT, 16) == 0) || (strncmp(vpdp->identifier, RIO_ISA2_IDENT, 16) == 0) || (strncmp(vpdp->identifier, RIO_ISA3_IDENT, 16) == 0)) { + /* Board is present... */ + if (RIOBoardTest(hp->PaddrP, hp->Caddr, RIO_AT, 0) == 0) { + /* ... and feeling fine!!!! */ + rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); + if (RIOAssignAT(p, hp->PaddrP, hp->Caddr, 0)) { + rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, host%d uniqid = %x.\n", p->RIONumHosts, p->RIOHosts[p->RIONumHosts - 1].UniqueNum); + okboard++; + found++; + } + } + + if (!okboard) { + iounmap(hp->Caddr); + hp->Caddr = NULL; + } + } + } + + + for (i = 0; i < p->RIONumHosts; i++) { + hp = &p->RIOHosts[i]; + if (hp->Ivec) { + int mode = IRQF_SHARED; + if (hp->Ivec & 0x8000) { + mode = 0; + hp->Ivec &= 0x7fff; + } + rio_dprintk(RIO_DEBUG_INIT, "Requesting interrupt hp: %p rio_interrupt: %d Mode: %x\n", hp, hp->Ivec, hp->Mode); + retval = request_irq(hp->Ivec, rio_interrupt, mode, "rio", hp); + rio_dprintk(RIO_DEBUG_INIT, "Return value from request_irq: %d\n", retval); + if (retval) { + printk(KERN_ERR "rio: Cannot allocate irq %d.\n", hp->Ivec); + hp->Ivec = 0; + } + rio_dprintk(RIO_DEBUG_INIT, "Got irq %d.\n", hp->Ivec); + if (hp->Ivec != 0) { + rio_dprintk(RIO_DEBUG_INIT, "Enabling interrupts on rio card.\n"); + hp->Mode |= RIO_PCI_INT_ENABLE; + } else + hp->Mode &= ~RIO_PCI_INT_ENABLE; + rio_dprintk(RIO_DEBUG_INIT, "New Mode: %x\n", hp->Mode); + rio_start_card_running(hp); + } + /* Init the timer "always" to make sure that it can safely be + deleted when we unload... */ + + setup_timer(&hp->timer, rio_pollfunc, i); + if (!hp->Ivec) { + rio_dprintk(RIO_DEBUG_INIT, "Starting polling at %dj intervals.\n", rio_poll); + mod_timer(&hp->timer, jiffies + rio_poll); + } + } + + if (found) { + rio_dprintk(RIO_DEBUG_INIT, "rio: total of %d boards detected.\n", found); + rio_init_drivers(); + } else { + /* deregister the misc device we created earlier */ + misc_deregister(&rio_fw_device); + } + + func_exit(); + return found ? 0 : -EIO; +} + + +static void __exit rio_exit(void) +{ + int i; + struct Host *hp; + + func_enter(); + + for (i = 0, hp = p->RIOHosts; i < p->RIONumHosts; i++, hp++) { + RIOHostReset(hp->Type, hp->CardP, hp->Slot); + if (hp->Ivec) { + free_irq(hp->Ivec, hp); + rio_dprintk(RIO_DEBUG_INIT, "freed irq %d.\n", hp->Ivec); + } + /* It is safe/allowed to del_timer a non-active timer */ + del_timer_sync(&hp->timer); + if (hp->Caddr) + iounmap(hp->Caddr); + if (hp->Type == RIO_PCI) + pci_dev_put(hp->pdev); + } + + if (misc_deregister(&rio_fw_device) < 0) { + printk(KERN_INFO "rio: couldn't deregister control-device\n"); + } + + + rio_dprintk(RIO_DEBUG_CLEANUP, "Cleaning up drivers\n"); + + rio_release_drivers(); + + /* Release dynamically allocated memory */ + kfree(p->RIOPortp); + kfree(p->RIOHosts); + kfree(p); + + func_exit(); +} + +module_init(rio_init); +module_exit(rio_exit); diff --git a/drivers/staging/generic_serial/rio/rio_linux.h b/drivers/staging/generic_serial/rio/rio_linux.h new file mode 100644 index 000000000000..7f26cd7c815e --- /dev/null +++ b/drivers/staging/generic_serial/rio/rio_linux.h @@ -0,0 +1,197 @@ + +/* + * rio_linux.h + * + * Copyright (C) 1998,1999,2000 R.E.Wolff@BitWizard.nl + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * RIO serial driver. + * + * Version 1.0 -- July, 1999. + * + */ + +#define RIO_NBOARDS 4 +#define RIO_PORTSPERBOARD 128 +#define RIO_NPORTS (RIO_NBOARDS * RIO_PORTSPERBOARD) + +#define MODEM_SUPPORT + +#ifdef __KERNEL__ + +#define RIO_MAGIC 0x12345678 + + +struct vpd_prom { + unsigned short id; + char hwrev; + char hwass; + int uniqid; + char myear; + char mweek; + char hw_feature[5]; + char oem_id; + char identifier[16]; +}; + + +#define RIO_DEBUG_ALL 0xffffffff + +#define O_OTHER(tty) \ + ((O_OLCUC(tty)) ||\ + (O_ONLCR(tty)) ||\ + (O_OCRNL(tty)) ||\ + (O_ONOCR(tty)) ||\ + (O_ONLRET(tty)) ||\ + (O_OFILL(tty)) ||\ + (O_OFDEL(tty)) ||\ + (O_NLDLY(tty)) ||\ + (O_CRDLY(tty)) ||\ + (O_TABDLY(tty)) ||\ + (O_BSDLY(tty)) ||\ + (O_VTDLY(tty)) ||\ + (O_FFDLY(tty))) + +/* Same for input. */ +#define I_OTHER(tty) \ + ((I_INLCR(tty)) ||\ + (I_IGNCR(tty)) ||\ + (I_ICRNL(tty)) ||\ + (I_IUCLC(tty)) ||\ + (L_ISIG(tty))) + + +#endif /* __KERNEL__ */ + + +#define RIO_BOARD_INTR_LOCK 1 + + +#ifndef RIOCTL_MISC_MINOR +/* Allow others to gather this into "major.h" or something like that */ +#define RIOCTL_MISC_MINOR 169 +#endif + + +/* Allow us to debug "in the field" without requiring clients to + recompile.... */ +#if 1 +#define rio_spin_lock_irqsave(sem, flags) do { \ + rio_dprintk (RIO_DEBUG_SPINLOCK, "spinlockirqsave: %p %s:%d\n", \ + sem, __FILE__, __LINE__);\ + spin_lock_irqsave(sem, flags);\ + } while (0) + +#define rio_spin_unlock_irqrestore(sem, flags) do { \ + rio_dprintk (RIO_DEBUG_SPINLOCK, "spinunlockirqrestore: %p %s:%d\n",\ + sem, __FILE__, __LINE__);\ + spin_unlock_irqrestore(sem, flags);\ + } while (0) + +#define rio_spin_lock(sem) do { \ + rio_dprintk (RIO_DEBUG_SPINLOCK, "spinlock: %p %s:%d\n",\ + sem, __FILE__, __LINE__);\ + spin_lock(sem);\ + } while (0) + +#define rio_spin_unlock(sem) do { \ + rio_dprintk (RIO_DEBUG_SPINLOCK, "spinunlock: %p %s:%d\n",\ + sem, __FILE__, __LINE__);\ + spin_unlock(sem);\ + } while (0) +#else +#define rio_spin_lock_irqsave(sem, flags) \ + spin_lock_irqsave(sem, flags) + +#define rio_spin_unlock_irqrestore(sem, flags) \ + spin_unlock_irqrestore(sem, flags) + +#define rio_spin_lock(sem) \ + spin_lock(sem) + +#define rio_spin_unlock(sem) \ + spin_unlock(sem) + +#endif + + + +#ifdef CONFIG_RIO_OLDPCI +static inline void __iomem *rio_memcpy_toio(void __iomem *dummy, void __iomem *dest, void *source, int n) +{ + char __iomem *dst = dest; + char *src = source; + + while (n--) { + writeb(*src++, dst++); + (void) readb(dummy); + } + + return dest; +} + +static inline void __iomem *rio_copy_toio(void __iomem *dest, void *source, int n) +{ + char __iomem *dst = dest; + char *src = source; + + while (n--) + writeb(*src++, dst++); + + return dest; +} + + +static inline void *rio_memcpy_fromio(void *dest, void __iomem *source, int n) +{ + char *dst = dest; + char __iomem *src = source; + + while (n--) + *dst++ = readb(src++); + + return dest; +} + +#else +#define rio_memcpy_toio(dummy,dest,source,n) memcpy_toio(dest, source, n) +#define rio_copy_toio memcpy_toio +#define rio_memcpy_fromio memcpy_fromio +#endif + +#define DEBUG 1 + + +/* + This driver can spew a whole lot of debugging output at you. If you + need maximum performance, you should disable the DEBUG define. To + aid in debugging in the field, I'm leaving the compile-time debug + features enabled, and disable them "runtime". That allows me to + instruct people with problems to enable debugging without requiring + them to recompile... +*/ + +#ifdef DEBUG +#define rio_dprintk(f, str...) do { if (rio_debug & f) printk (str);} while (0) +#define func_enter() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s\n", __func__) +#define func_exit() rio_dprintk (RIO_DEBUG_FLOW, "rio: exit %s\n", __func__) +#define func_enter2() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s (port %d)\n",__func__, port->line) +#else +#define rio_dprintk(f, str...) /* nothing */ +#define func_enter() +#define func_exit() +#define func_enter2() +#endif diff --git a/drivers/staging/generic_serial/rio/rioboard.h b/drivers/staging/generic_serial/rio/rioboard.h new file mode 100644 index 000000000000..252230043c82 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rioboard.h @@ -0,0 +1,275 @@ +/************************************************************************/ +/* */ +/* Title : RIO Host Card Hardware Definitions */ +/* */ +/* Author : N.P.Vassallo */ +/* */ +/* Creation : 26th April 1999 */ +/* */ +/* Version : 1.0.0 */ +/* */ +/* Copyright : (c) Specialix International Ltd. 1999 * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * */ +/* Description : Prototypes, structures and definitions */ +/* describing the RIO board hardware */ +/* */ +/************************************************************************/ + +#ifndef _rioboard_h /* If RIOBOARD.H not already defined */ +#define _rioboard_h 1 + +/***************************************************************************** +*********************** *********************** +*********************** Hardware Control Registers *********************** +*********************** *********************** +*****************************************************************************/ + +/* Hardware Registers... */ + +#define RIO_REG_BASE 0x7C00 /* Base of control registers */ + +#define RIO_CONFIG RIO_REG_BASE + 0x0000 /* WRITE: Configuration Register */ +#define RIO_INTSET RIO_REG_BASE + 0x0080 /* WRITE: Interrupt Set */ +#define RIO_RESET RIO_REG_BASE + 0x0100 /* WRITE: Host Reset */ +#define RIO_INTRESET RIO_REG_BASE + 0x0180 /* WRITE: Interrupt Reset */ + +#define RIO_VPD_ROM RIO_REG_BASE + 0x0000 /* READ: Vital Product Data ROM */ +#define RIO_INTSTAT RIO_REG_BASE + 0x0080 /* READ: Interrupt Status (Jet boards only) */ +#define RIO_RESETSTAT RIO_REG_BASE + 0x0100 /* READ: Reset Status (Jet boards only) */ + +/* RIO_VPD_ROM definitions... */ +#define VPD_SLX_ID1 0x00 /* READ: Specialix Identifier #1 */ +#define VPD_SLX_ID2 0x01 /* READ: Specialix Identifier #2 */ +#define VPD_HW_REV 0x02 /* READ: Hardware Revision */ +#define VPD_HW_ASSEM 0x03 /* READ: Hardware Assembly Level */ +#define VPD_UNIQUEID4 0x04 /* READ: Unique Identifier #4 */ +#define VPD_UNIQUEID3 0x05 /* READ: Unique Identifier #3 */ +#define VPD_UNIQUEID2 0x06 /* READ: Unique Identifier #2 */ +#define VPD_UNIQUEID1 0x07 /* READ: Unique Identifier #1 */ +#define VPD_MANU_YEAR 0x08 /* READ: Year Of Manufacture (0 = 1970) */ +#define VPD_MANU_WEEK 0x09 /* READ: Week Of Manufacture (0 = week 1 Jan) */ +#define VPD_HWFEATURE1 0x0A /* READ: Hardware Feature Byte 1 */ +#define VPD_HWFEATURE2 0x0B /* READ: Hardware Feature Byte 2 */ +#define VPD_HWFEATURE3 0x0C /* READ: Hardware Feature Byte 3 */ +#define VPD_HWFEATURE4 0x0D /* READ: Hardware Feature Byte 4 */ +#define VPD_HWFEATURE5 0x0E /* READ: Hardware Feature Byte 5 */ +#define VPD_OEMID 0x0F /* READ: OEM Identifier */ +#define VPD_IDENT 0x10 /* READ: Identifier string (16 bytes) */ +#define VPD_IDENT_LEN 0x10 + +/* VPD ROM Definitions... */ +#define SLX_ID1 0x4D +#define SLX_ID2 0x98 + +#define PRODUCT_ID(a) ((a>>4)&0xF) /* Use to obtain Product ID from VPD_UNIQUEID1 */ + +#define ID_SX_ISA 0x2 +#define ID_RIO_EISA 0x3 +#define ID_SX_PCI 0x5 +#define ID_SX_EISA 0x7 +#define ID_RIO_RTA16 0x9 +#define ID_RIO_ISA 0xA +#define ID_RIO_MCA 0xB +#define ID_RIO_SBUS 0xC +#define ID_RIO_PCI 0xD +#define ID_RIO_RTA8 0xE + +/* Transputer bootstrap definitions... */ + +#define BOOTLOADADDR (0x8000 - 6) +#define BOOTINDICATE (0x8000 - 2) + +/* Firmware load position... */ + +#define FIRMWARELOADADDR 0x7C00 /* Firmware is loaded _before_ this address */ + +/***************************************************************************** +***************************** ***************************** +***************************** RIO (Rev1) ISA ***************************** +***************************** ***************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_ISA_IDENT "JBJGPGGHINSMJPJR" + +#define RIO_ISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_ISA_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_ISA_CFG_IRQMASK 0x30 /* Interrupt mask */ +#define RIO_ISA_CFG_IRQ12 0x10 /* Interrupt Level 12 */ +#define RIO_ISA_CFG_IRQ11 0x20 /* Interrupt Level 11 */ +#define RIO_ISA_CFG_IRQ9 0x30 /* Interrupt Level 9 */ +#define RIO_ISA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ +#define RIO_ISA_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */ + +/***************************************************************************** +***************************** ***************************** +***************************** RIO (Rev2) ISA ***************************** +***************************** ***************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_ISA2_IDENT "JBJGPGGHINSMJPJR" + +#define RIO_ISA2_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_ISA2_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_ISA2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ +#define RIO_ISA2_CFG_16BIT 0x08 /* 16bit mode, else 8bit */ +#define RIO_ISA2_CFG_IRQMASK 0x30 /* Interrupt mask */ +#define RIO_ISA2_CFG_IRQ15 0x00 /* Interrupt Level 15 */ +#define RIO_ISA2_CFG_IRQ12 0x10 /* Interrupt Level 12 */ +#define RIO_ISA2_CFG_IRQ11 0x20 /* Interrupt Level 11 */ +#define RIO_ISA2_CFG_IRQ9 0x30 /* Interrupt Level 9 */ +#define RIO_ISA2_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ +#define RIO_ISA2_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */ + +/***************************************************************************** +***************************** ****************************** +***************************** RIO (Jet) ISA ****************************** +***************************** ****************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_ISA3_IDENT "JET HOST BY KEV#" + +#define RIO_ISA3_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_ISA3_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ +#define RIO_ISA32_CFG_IRQMASK 0xF30 /* Interrupt mask */ +#define RIO_ISA3_CFG_IRQ15 0xF0 /* Interrupt Level 15 */ +#define RIO_ISA3_CFG_IRQ12 0xC0 /* Interrupt Level 12 */ +#define RIO_ISA3_CFG_IRQ11 0xB0 /* Interrupt Level 11 */ +#define RIO_ISA3_CFG_IRQ10 0xA0 /* Interrupt Level 10 */ +#define RIO_ISA3_CFG_IRQ9 0x90 /* Interrupt Level 9 */ + +/***************************************************************************** +********************************* ******************************** +********************************* RIO MCA ******************************** +********************************* ******************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_MCA_IDENT "JBJGPGGHINSMJPJR" + +#define RIO_MCA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_MCA_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_MCA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ + +/***************************************************************************** +******************************** ******************************** +******************************** RIO EISA ******************************** +******************************** ******************************** +*****************************************************************************/ + +/* EISA Configuration Space Definitions... */ +#define EISA_PRODUCT_ID1 0xC80 +#define EISA_PRODUCT_ID2 0xC81 +#define EISA_PRODUCT_NUMBER 0xC82 +#define EISA_REVISION_NUMBER 0xC83 +#define EISA_CARD_ENABLE 0xC84 +#define EISA_VPD_UNIQUEID4 0xC88 /* READ: Unique Identifier #4 */ +#define EISA_VPD_UNIQUEID3 0xC8A /* READ: Unique Identifier #3 */ +#define EISA_VPD_UNIQUEID2 0xC90 /* READ: Unique Identifier #2 */ +#define EISA_VPD_UNIQUEID1 0xC92 /* READ: Unique Identifier #1 */ +#define EISA_VPD_MANU_YEAR 0xC98 /* READ: Year Of Manufacture (0 = 1970) */ +#define EISA_VPD_MANU_WEEK 0xC9A /* READ: Week Of Manufacture (0 = week 1 Jan) */ +#define EISA_MEM_ADDR_23_16 0xC00 +#define EISA_MEM_ADDR_31_24 0xC01 +#define EISA_RIO_CONFIG 0xC02 /* WRITE: Configuration Register */ +#define EISA_RIO_INTSET 0xC03 /* WRITE: Interrupt Set */ +#define EISA_RIO_INTRESET 0xC03 /* READ: Interrupt Reset */ + +/* Control Register Definitions... */ +#define RIO_EISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_EISA_CFG_LINK20 0x02 /* 20Mbps link, else 10Mbps */ +#define RIO_EISA_CFG_BUSENABLE 0x04 /* Enable processor bus */ +#define RIO_EISA_CFG_PROCRUN 0x08 /* Processor running, else reset */ +#define RIO_EISA_CFG_IRQMASK 0xF0 /* Interrupt mask */ +#define RIO_EISA_CFG_IRQ15 0xF0 /* Interrupt Level 15 */ +#define RIO_EISA_CFG_IRQ14 0xE0 /* Interrupt Level 14 */ +#define RIO_EISA_CFG_IRQ12 0xC0 /* Interrupt Level 12 */ +#define RIO_EISA_CFG_IRQ11 0xB0 /* Interrupt Level 11 */ +#define RIO_EISA_CFG_IRQ10 0xA0 /* Interrupt Level 10 */ +#define RIO_EISA_CFG_IRQ9 0x90 /* Interrupt Level 9 */ +#define RIO_EISA_CFG_IRQ7 0x70 /* Interrupt Level 7 */ +#define RIO_EISA_CFG_IRQ6 0x60 /* Interrupt Level 6 */ +#define RIO_EISA_CFG_IRQ5 0x50 /* Interrupt Level 5 */ +#define RIO_EISA_CFG_IRQ4 0x40 /* Interrupt Level 4 */ +#define RIO_EISA_CFG_IRQ3 0x30 /* Interrupt Level 3 */ + +/***************************************************************************** +******************************** ******************************** +******************************** RIO SBus ******************************** +******************************** ******************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_SBUS_IDENT "JBPGK#\0\0\0\0\0\0\0\0\0\0" + +#define RIO_SBUS_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_SBUS_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_SBUS_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ +#define RIO_SBUS_CFG_IRQMASK 0x38 /* Interrupt mask */ +#define RIO_SBUS_CFG_IRQNONE 0x00 /* No Interrupt */ +#define RIO_SBUS_CFG_IRQ7 0x38 /* Interrupt Level 7 */ +#define RIO_SBUS_CFG_IRQ6 0x30 /* Interrupt Level 6 */ +#define RIO_SBUS_CFG_IRQ5 0x28 /* Interrupt Level 5 */ +#define RIO_SBUS_CFG_IRQ4 0x20 /* Interrupt Level 4 */ +#define RIO_SBUS_CFG_IRQ3 0x18 /* Interrupt Level 3 */ +#define RIO_SBUS_CFG_IRQ2 0x10 /* Interrupt Level 2 */ +#define RIO_SBUS_CFG_IRQ1 0x08 /* Interrupt Level 1 */ +#define RIO_SBUS_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ +#define RIO_SBUS_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */ + +/***************************************************************************** +********************************* ******************************** +********************************* RIO PCI ******************************** +********************************* ******************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_PCI_IDENT "ECDDPGJGJHJRGSK#" + +#define RIO_PCI_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ +#define RIO_PCI_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_PCI_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ +#define RIO_PCI_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ +#define RIO_PCI_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */ + +/* PCI Definitions... */ +#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */ +#define SPX_DEVICE_ID 0x8000 /* RIO bridge boards */ +#define SPX_PLXDEVICE_ID 0x2000 /* PLX bridge boards */ +#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */ +#define RIO_SUB_SYS_ID 0x0800 /* RIO PCI board */ + +/***************************************************************************** +***************************** ****************************** +***************************** RIO (Jet) PCI ****************************** +***************************** ****************************** +*****************************************************************************/ + +/* Control Register Definitions... */ +#define RIO_PCI2_IDENT "JET HOST BY KEV#" + +#define RIO_PCI2_CFG_BUSENABLE 0x02 /* Enable processor bus */ +#define RIO_PCI2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ + +/* PCI Definitions... */ +#define RIO2_SUB_SYS_ID 0x0100 /* RIO (Jet) PCI board */ + +#endif /*_rioboard_h */ + +/* End of RIOBOARD.H */ diff --git a/drivers/staging/generic_serial/rio/rioboot.c b/drivers/staging/generic_serial/rio/rioboot.c new file mode 100644 index 000000000000..d956dd316005 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rioboot.c @@ -0,0 +1,1113 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rioboot.c +** SID : 1.3 +** Last Modified : 11/6/98 10:33:36 +** Retrieved : 11/6/98 10:33:48 +** +** ident @(#)rioboot.c 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#include "linux_compat.h" +#include "rio_linux.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" + +static int RIOBootComplete(struct rio_info *p, struct Host *HostP, unsigned int Rup, struct PktCmd __iomem *PktCmdP); + +static const unsigned char RIOAtVec2Ctrl[] = { + /* 0 */ INTERRUPT_DISABLE, + /* 1 */ INTERRUPT_DISABLE, + /* 2 */ INTERRUPT_DISABLE, + /* 3 */ INTERRUPT_DISABLE, + /* 4 */ INTERRUPT_DISABLE, + /* 5 */ INTERRUPT_DISABLE, + /* 6 */ INTERRUPT_DISABLE, + /* 7 */ INTERRUPT_DISABLE, + /* 8 */ INTERRUPT_DISABLE, + /* 9 */ IRQ_9 | INTERRUPT_ENABLE, + /* 10 */ INTERRUPT_DISABLE, + /* 11 */ IRQ_11 | INTERRUPT_ENABLE, + /* 12 */ IRQ_12 | INTERRUPT_ENABLE, + /* 13 */ INTERRUPT_DISABLE, + /* 14 */ INTERRUPT_DISABLE, + /* 15 */ IRQ_15 | INTERRUPT_ENABLE +}; + +/** + * RIOBootCodeRTA - Load RTA boot code + * @p: RIO to load + * @rbp: Download descriptor + * + * Called when the user process initiates booting of the card firmware. + * Lads the firmware + */ + +int RIOBootCodeRTA(struct rio_info *p, struct DownLoad * rbp) +{ + int offset; + + func_enter(); + + rio_dprintk(RIO_DEBUG_BOOT, "Data at user address %p\n", rbp->DataP); + + /* + ** Check that we have set asside enough memory for this + */ + if (rbp->Count > SIXTY_FOUR_K) { + rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n"); + p->RIOError.Error = HOST_FILE_TOO_LARGE; + func_exit(); + return -ENOMEM; + } + + if (p->RIOBooting) { + rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code : BUSY BUSY BUSY!\n"); + p->RIOError.Error = BOOT_IN_PROGRESS; + func_exit(); + return -EBUSY; + } + + /* + ** The data we load in must end on a (RTA_BOOT_DATA_SIZE) byte boundary, + ** so calculate how far we have to move the data up the buffer + ** to achieve this. + */ + offset = (RTA_BOOT_DATA_SIZE - (rbp->Count % RTA_BOOT_DATA_SIZE)) % RTA_BOOT_DATA_SIZE; + + /* + ** Be clean, and clear the 'unused' portion of the boot buffer, + ** because it will (eventually) be part of the Rta run time environment + ** and so should be zeroed. + */ + memset(p->RIOBootPackets, 0, offset); + + /* + ** Copy the data from user space into the array + */ + + if (copy_from_user(((u8 *)p->RIOBootPackets) + offset, rbp->DataP, rbp->Count)) { + rio_dprintk(RIO_DEBUG_BOOT, "Bad data copy from user space\n"); + p->RIOError.Error = COPYIN_FAILED; + func_exit(); + return -EFAULT; + } + + /* + ** Make sure that our copy of the size includes that offset we discussed + ** earlier. + */ + p->RIONumBootPkts = (rbp->Count + offset) / RTA_BOOT_DATA_SIZE; + p->RIOBootCount = rbp->Count; + + func_exit(); + return 0; +} + +/** + * rio_start_card_running - host card start + * @HostP: The RIO to kick off + * + * Start a RIO processor unit running. Encapsulates the knowledge + * of the card type. + */ + +void rio_start_card_running(struct Host *HostP) +{ + switch (HostP->Type) { + case RIO_AT: + rio_dprintk(RIO_DEBUG_BOOT, "Start ISA card running\n"); + writeb(BOOT_FROM_RAM | EXTERNAL_BUS_ON | HostP->Mode | RIOAtVec2Ctrl[HostP->Ivec & 0xF], &HostP->Control); + break; + case RIO_PCI: + /* + ** PCI is much the same as MCA. Everything is once again memory + ** mapped, so we are writing to memory registers instead of io + ** ports. + */ + rio_dprintk(RIO_DEBUG_BOOT, "Start PCI card running\n"); + writeb(PCITpBootFromRam | PCITpBusEnable | HostP->Mode, &HostP->Control); + break; + default: + rio_dprintk(RIO_DEBUG_BOOT, "Unknown host type %d\n", HostP->Type); + break; + } + return; +} + +/* +** Load in the host boot code - load it directly onto all halted hosts +** of the correct type. +** +** Put your rubber pants on before messing with this code - even the magic +** numbers have trouble understanding what they are doing here. +*/ + +int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp) +{ + struct Host *HostP; + u8 __iomem *Cad; + PARM_MAP __iomem *ParmMapP; + int RupN; + int PortN; + unsigned int host; + u8 __iomem *StartP; + u8 __iomem *DestP; + int wait_count; + u16 OldParmMap; + u16 offset; /* It is very important that this is a u16 */ + u8 *DownCode = NULL; + unsigned long flags; + + HostP = NULL; /* Assure the compiler we've initialized it */ + + + /* Walk the hosts */ + for (host = 0; host < p->RIONumHosts; host++) { + rio_dprintk(RIO_DEBUG_BOOT, "Attempt to boot host %d\n", host); + HostP = &p->RIOHosts[host]; + + rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec); + + /* Don't boot hosts already running */ + if ((HostP->Flags & RUN_STATE) != RC_WAITING) { + rio_dprintk(RIO_DEBUG_BOOT, "%s %d already running\n", "Host", host); + continue; + } + + /* + ** Grab a pointer to the card (ioremapped) + */ + Cad = HostP->Caddr; + + /* + ** We are going to (try) and load in rbp->Count bytes. + ** The last byte will reside at p->RIOConf.HostLoadBase-1; + ** Therefore, we need to start copying at address + ** (caddr+p->RIOConf.HostLoadBase-rbp->Count) + */ + StartP = &Cad[p->RIOConf.HostLoadBase - rbp->Count]; + + rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for host is %p\n", Cad); + rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for download is %p\n", StartP); + rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase); + rio_dprintk(RIO_DEBUG_BOOT, "size of download is 0x%x\n", rbp->Count); + + /* Make sure it fits */ + if (p->RIOConf.HostLoadBase < rbp->Count) { + rio_dprintk(RIO_DEBUG_BOOT, "Bin too large\n"); + p->RIOError.Error = HOST_FILE_TOO_LARGE; + func_exit(); + return -EFBIG; + } + /* + ** Ensure that the host really is stopped. + ** Disable it's external bus & twang its reset line. + */ + RIOHostReset(HostP->Type, HostP->CardP, HostP->Slot); + + /* + ** Copy the data directly from user space to the SRAM. + ** This ain't going to be none too clever if the download + ** code is bigger than this segment. + */ + rio_dprintk(RIO_DEBUG_BOOT, "Copy in code\n"); + + /* Buffer to local memory as we want to use I/O space and + some cards only do 8 or 16 bit I/O */ + + DownCode = vmalloc(rbp->Count); + if (!DownCode) { + p->RIOError.Error = NOT_ENOUGH_CORE_FOR_PCI_COPY; + func_exit(); + return -ENOMEM; + } + if (copy_from_user(DownCode, rbp->DataP, rbp->Count)) { + kfree(DownCode); + p->RIOError.Error = COPYIN_FAILED; + func_exit(); + return -EFAULT; + } + HostP->Copy(DownCode, StartP, rbp->Count); + vfree(DownCode); + + rio_dprintk(RIO_DEBUG_BOOT, "Copy completed\n"); + + /* + ** S T O P ! + ** + ** Upto this point the code has been fairly rational, and possibly + ** even straight forward. What follows is a pile of crud that will + ** magically turn into six bytes of transputer assembler. Normally + ** you would expect an array or something, but, being me, I have + ** chosen [been told] to use a technique whereby the startup code + ** will be correct if we change the loadbase for the code. Which + ** brings us onto another issue - the loadbase is the *end* of the + ** code, not the start. + ** + ** If I were you I wouldn't start from here. + */ + + /* + ** We now need to insert a short boot section into + ** the memory at the end of Sram2. This is normally (de)composed + ** of the last eight bytes of the download code. The + ** download has been assembled/compiled to expect to be + ** loaded from 0x7FFF downwards. We have loaded it + ** at some other address. The startup code goes into the small + ** ram window at Sram2, in the last 8 bytes, which are really + ** at addresses 0x7FF8-0x7FFF. + ** + ** If the loadbase is, say, 0x7C00, then we need to branch to + ** address 0x7BFE to run the host.bin startup code. We assemble + ** this jump manually. + ** + ** The two byte sequence 60 08 is loaded into memory at address + ** 0x7FFE,F. This is a local branch to location 0x7FF8 (60 is nfix 0, + ** which adds '0' to the .O register, complements .O, and then shifts + ** it left by 4 bit positions, 08 is a jump .O+8 instruction. This will + ** add 8 to .O (which was 0xFFF0), and will branch RELATIVE to the new + ** location. Now, the branch starts from the value of .PC (or .IP or + ** whatever the bloody register is called on this chip), and the .PC + ** will be pointing to the location AFTER the branch, in this case + ** .PC == 0x8000, so the branch will be to 0x8000+0xFFF8 = 0x7FF8. + ** + ** A long branch is coded at 0x7FF8. This consists of loading a four + ** byte offset into .O using nfix (as above) and pfix operators. The + ** pfix operates in exactly the same way as the nfix operator, but + ** without the complement operation. The offset, of course, must be + ** relative to the address of the byte AFTER the branch instruction, + ** which will be (urm) 0x7FFC, so, our final destination of the branch + ** (loadbase-2), has to be reached from here. Imagine that the loadbase + ** is 0x7C00 (which it is), then we will need to branch to 0x7BFE (which + ** is the first byte of the initial two byte short local branch of the + ** download code). + ** + ** To code a jump from 0x7FFC (which is where the branch will start + ** from) to 0x7BFE, we will need to branch 0xFC02 bytes (0x7FFC+0xFC02)= + ** 0x7BFE. + ** This will be coded as four bytes: + ** 60 2C 20 02 + ** being nfix .O+0 + ** pfix .O+C + ** pfix .O+0 + ** jump .O+2 + ** + ** The nfix operator is used, so that the startup code will be + ** compatible with the whole Tp family. (lies, damn lies, it'll never + ** work in a month of Sundays). + ** + ** The nfix nyble is the 1s complement of the nyble value you + ** want to load - in this case we wanted 'F' so we nfix loaded '0'. + */ + + + /* + ** Dest points to the top 8 bytes of Sram2. The Tp jumps + ** to 0x7FFE at reset time, and starts executing. This is + ** a short branch to 0x7FF8, where a long branch is coded. + */ + + DestP = &Cad[0x7FF8]; /* <<<---- READ THE ABOVE COMMENTS */ + +#define NFIX(N) (0x60 | (N)) /* .O = (~(.O + N))<<4 */ +#define PFIX(N) (0x20 | (N)) /* .O = (.O + N)<<4 */ +#define JUMP(N) (0x00 | (N)) /* .PC = .PC + .O */ + + /* + ** 0x7FFC is the address of the location following the last byte of + ** the four byte jump instruction. + ** READ THE ABOVE COMMENTS + ** + ** offset is (TO-FROM) % MEMSIZE, but with compound buggering about. + ** Memsize is 64K for this range of Tp, so offset is a short (unsigned, + ** cos I don't understand 2's complement). + */ + offset = (p->RIOConf.HostLoadBase - 2) - 0x7FFC; + + writeb(NFIX(((unsigned short) (~offset) >> (unsigned short) 12) & 0xF), DestP); + writeb(PFIX((offset >> 8) & 0xF), DestP + 1); + writeb(PFIX((offset >> 4) & 0xF), DestP + 2); + writeb(JUMP(offset & 0xF), DestP + 3); + + writeb(NFIX(0), DestP + 6); + writeb(JUMP(8), DestP + 7); + + rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase); + rio_dprintk(RIO_DEBUG_BOOT, "startup offset is 0x%x\n", offset); + + /* + ** Flag what is going on + */ + HostP->Flags &= ~RUN_STATE; + HostP->Flags |= RC_STARTUP; + + /* + ** Grab a copy of the current ParmMap pointer, so we + ** can tell when it has changed. + */ + OldParmMap = readw(&HostP->__ParmMapR); + + rio_dprintk(RIO_DEBUG_BOOT, "Original parmmap is 0x%x\n", OldParmMap); + + /* + ** And start it running (I hope). + ** As there is nothing dodgy or obscure about the + ** above code, this is guaranteed to work every time. + */ + rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec); + + rio_start_card_running(HostP); + + rio_dprintk(RIO_DEBUG_BOOT, "Set control port\n"); + + /* + ** Now, wait for upto five seconds for the Tp to setup the parmmap + ** pointer: + */ + for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && (readw(&HostP->__ParmMapR) == OldParmMap); wait_count++) { + rio_dprintk(RIO_DEBUG_BOOT, "Checkout %d, 0x%x\n", wait_count, readw(&HostP->__ParmMapR)); + mdelay(100); + + } + + /* + ** If the parmmap pointer is unchanged, then the host code + ** has crashed & burned in a really spectacular way + */ + if (readw(&HostP->__ParmMapR) == OldParmMap) { + rio_dprintk(RIO_DEBUG_BOOT, "parmmap 0x%x\n", readw(&HostP->__ParmMapR)); + rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail\n"); + HostP->Flags &= ~RUN_STATE; + HostP->Flags |= RC_STUFFED; + RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); + continue; + } + + rio_dprintk(RIO_DEBUG_BOOT, "Running 0x%x\n", readw(&HostP->__ParmMapR)); + + /* + ** Well, the board thought it was OK, and setup its parmmap + ** pointer. For the time being, we will pretend that this + ** board is running, and check out what the error flag says. + */ + + /* + ** Grab a 32 bit pointer to the parmmap structure + */ + ParmMapP = (PARM_MAP __iomem *) RIO_PTR(Cad, readw(&HostP->__ParmMapR)); + rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %p\n", ParmMapP); + ParmMapP = (PARM_MAP __iomem *)(Cad + readw(&HostP->__ParmMapR)); + rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %p\n", ParmMapP); + + /* + ** The links entry should be 0xFFFF; we set it up + ** with a mask to say how many PHBs to use, and + ** which links to use. + */ + if (readw(&ParmMapP->links) != 0xFFFF) { + rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name); + rio_dprintk(RIO_DEBUG_BOOT, "Links = 0x%x\n", readw(&ParmMapP->links)); + HostP->Flags &= ~RUN_STATE; + HostP->Flags |= RC_STUFFED; + RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); + continue; + } + + writew(RIO_LINK_ENABLE, &ParmMapP->links); + + /* + ** now wait for the card to set all the parmmap->XXX stuff + ** this is a wait of upto two seconds.... + */ + rio_dprintk(RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n", p->RIOConf.StartupTime); + HostP->timeout_id = 0; + for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && !readw(&ParmMapP->init_done); wait_count++) { + rio_dprintk(RIO_DEBUG_BOOT, "Waiting for init_done\n"); + mdelay(100); + } + rio_dprintk(RIO_DEBUG_BOOT, "OK! init_done!\n"); + + if (readw(&ParmMapP->error) != E_NO_ERROR || !readw(&ParmMapP->init_done)) { + rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name); + rio_dprintk(RIO_DEBUG_BOOT, "Timedout waiting for init_done\n"); + HostP->Flags &= ~RUN_STATE; + HostP->Flags |= RC_STUFFED; + RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); + continue; + } + + rio_dprintk(RIO_DEBUG_BOOT, "Got init_done\n"); + + /* + ** It runs! It runs! + */ + rio_dprintk(RIO_DEBUG_BOOT, "Host ID %x Running\n", HostP->UniqueNum); + + /* + ** set the time period between interrupts. + */ + writew(p->RIOConf.Timer, &ParmMapP->timer); + + /* + ** Translate all the 16 bit pointers in the __ParmMapR into + ** 32 bit pointers for the driver in ioremap space. + */ + HostP->ParmMapP = ParmMapP; + HostP->PhbP = (struct PHB __iomem *) RIO_PTR(Cad, readw(&ParmMapP->phb_ptr)); + HostP->RupP = (struct RUP __iomem *) RIO_PTR(Cad, readw(&ParmMapP->rups)); + HostP->PhbNumP = (unsigned short __iomem *) RIO_PTR(Cad, readw(&ParmMapP->phb_num_ptr)); + HostP->LinkStrP = (struct LPB __iomem *) RIO_PTR(Cad, readw(&ParmMapP->link_str_ptr)); + + /* + ** point the UnixRups at the real Rups + */ + for (RupN = 0; RupN < MAX_RUP; RupN++) { + HostP->UnixRups[RupN].RupP = &HostP->RupP[RupN]; + HostP->UnixRups[RupN].Id = RupN + 1; + HostP->UnixRups[RupN].BaseSysPort = NO_PORT; + spin_lock_init(&HostP->UnixRups[RupN].RupLock); + } + + for (RupN = 0; RupN < LINKS_PER_UNIT; RupN++) { + HostP->UnixRups[RupN + MAX_RUP].RupP = &HostP->LinkStrP[RupN].rup; + HostP->UnixRups[RupN + MAX_RUP].Id = 0; + HostP->UnixRups[RupN + MAX_RUP].BaseSysPort = NO_PORT; + spin_lock_init(&HostP->UnixRups[RupN + MAX_RUP].RupLock); + } + + /* + ** point the PortP->Phbs at the real Phbs + */ + for (PortN = p->RIOFirstPortsMapped; PortN < p->RIOLastPortsMapped + PORTS_PER_RTA; PortN++) { + if (p->RIOPortp[PortN]->HostP == HostP) { + struct Port *PortP = p->RIOPortp[PortN]; + struct PHB __iomem *PhbP; + /* int oldspl; */ + + if (!PortP->Mapped) + continue; + + PhbP = &HostP->PhbP[PortP->HostPort]; + rio_spin_lock_irqsave(&PortP->portSem, flags); + + PortP->PhbP = PhbP; + + PortP->TxAdd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_add)); + PortP->TxStart = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_start)); + PortP->TxEnd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_end)); + PortP->RxRemove = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_remove)); + PortP->RxStart = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_start)); + PortP->RxEnd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_end)); + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + /* + ** point the UnixRup at the base SysPort + */ + if (!(PortN % PORTS_PER_RTA)) + HostP->UnixRups[PortP->RupNum].BaseSysPort = PortN; + } + } + + rio_dprintk(RIO_DEBUG_BOOT, "Set the card running... \n"); + /* + ** last thing - show the world that everything is in place + */ + HostP->Flags &= ~RUN_STATE; + HostP->Flags |= RC_RUNNING; + } + /* + ** MPX always uses a poller. This is actually patched into the system + ** configuration and called directly from each clock tick. + ** + */ + p->RIOPolling = 1; + + p->RIOSystemUp++; + + rio_dprintk(RIO_DEBUG_BOOT, "Done everything %x\n", HostP->Ivec); + func_exit(); + return 0; +} + + + +/** + * RIOBootRup - Boot an RTA + * @p: rio we are working with + * @Rup: Rup number + * @HostP: host object + * @PacketP: packet to use + * + * If we have successfully processed this boot, then + * return 1. If we havent, then return 0. + */ + +int RIOBootRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem *PacketP) +{ + struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data; + struct PktCmd_M *PktReplyP; + struct CmdBlk *CmdBlkP; + unsigned int sequence; + + /* + ** If we haven't been told what to boot, we can't boot it. + */ + if (p->RIONumBootPkts == 0) { + rio_dprintk(RIO_DEBUG_BOOT, "No RTA code to download yet\n"); + return 0; + } + + /* + ** Special case of boot completed - if we get one of these then we + ** don't need a command block. For all other cases we do, so handle + ** this first and then get a command block, then handle every other + ** case, relinquishing the command block if disaster strikes! + */ + if ((readb(&PacketP->len) & PKT_CMD_BIT) && (readb(&PktCmdP->Command) == BOOT_COMPLETED)) + return RIOBootComplete(p, HostP, Rup, PktCmdP); + + /* + ** Try to allocate a command block. This is in kernel space + */ + if (!(CmdBlkP = RIOGetCmdBlk())) { + rio_dprintk(RIO_DEBUG_BOOT, "No command blocks to boot RTA! come back later.\n"); + return 0; + } + + /* + ** Fill in the default info on the command block + */ + CmdBlkP->Packet.dest_unit = Rup < (unsigned short) MAX_RUP ? Rup : 0; + CmdBlkP->Packet.dest_port = BOOT_RUP; + CmdBlkP->Packet.src_unit = 0; + CmdBlkP->Packet.src_port = BOOT_RUP; + + CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; + PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data; + + /* + ** process COMMANDS on the boot rup! + */ + if (readb(&PacketP->len) & PKT_CMD_BIT) { + /* + ** We only expect one type of command - a BOOT_REQUEST! + */ + if (readb(&PktCmdP->Command) != BOOT_REQUEST) { + rio_dprintk(RIO_DEBUG_BOOT, "Unexpected command %d on BOOT RUP %d of host %Zd\n", readb(&PktCmdP->Command), Rup, HostP - p->RIOHosts); + RIOFreeCmdBlk(CmdBlkP); + return 1; + } + + /* + ** Build a Boot Sequence command block + ** + ** We no longer need to use "Boot Mode", we'll always allow + ** boot requests - the boot will not complete if the device + ** appears in the bindings table. + ** + ** We'll just (always) set the command field in packet reply + ** to allow an attempted boot sequence : + */ + PktReplyP->Command = BOOT_SEQUENCE; + + PktReplyP->BootSequence.NumPackets = p->RIONumBootPkts; + PktReplyP->BootSequence.LoadBase = p->RIOConf.RtaLoadBase; + PktReplyP->BootSequence.CodeSize = p->RIOBootCount; + + CmdBlkP->Packet.len = BOOT_SEQUENCE_LEN | PKT_CMD_BIT; + + memcpy((void *) &CmdBlkP->Packet.data[BOOT_SEQUENCE_LEN], "BOOT", 4); + + rio_dprintk(RIO_DEBUG_BOOT, "Boot RTA on Host %Zd Rup %d - %d (0x%x) packets to 0x%x\n", HostP - p->RIOHosts, Rup, p->RIONumBootPkts, p->RIONumBootPkts, p->RIOConf.RtaLoadBase); + + /* + ** If this host is in slave mode, send the RTA an invalid boot + ** sequence command block to force it to kill the boot. We wait + ** for half a second before sending this packet to prevent the RTA + ** attempting to boot too often. The master host should then grab + ** the RTA and make it its own. + */ + p->RIOBooting++; + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + return 1; + } + + /* + ** It is a request for boot data. + */ + sequence = readw(&PktCmdP->Sequence); + + rio_dprintk(RIO_DEBUG_BOOT, "Boot block %d on Host %Zd Rup%d\n", sequence, HostP - p->RIOHosts, Rup); + + if (sequence >= p->RIONumBootPkts) { + rio_dprintk(RIO_DEBUG_BOOT, "Got a request for packet %d, max is %d\n", sequence, p->RIONumBootPkts); + } + + PktReplyP->Sequence = sequence; + memcpy(PktReplyP->BootData, p->RIOBootPackets[p->RIONumBootPkts - sequence - 1], RTA_BOOT_DATA_SIZE); + CmdBlkP->Packet.len = PKT_MAX_DATA_LEN; + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + return 1; +} + +/** + * RIOBootComplete - RTA boot is done + * @p: RIO we are working with + * @HostP: Host structure + * @Rup: RUP being used + * @PktCmdP: Packet command that was used + * + * This function is called when an RTA been booted. + * If booted by a host, HostP->HostUniqueNum is the booting host. + * If booted by an RTA, HostP->Mapping[Rup].RtaUniqueNum is the booting RTA. + * RtaUniq is the booted RTA. + */ + +static int RIOBootComplete(struct rio_info *p, struct Host *HostP, unsigned int Rup, struct PktCmd __iomem *PktCmdP) +{ + struct Map *MapP = NULL; + struct Map *MapP2 = NULL; + int Flag; + int found; + int host, rta; + int EmptySlot = -1; + int entry, entry2; + char *MyType, *MyName; + unsigned int MyLink; + unsigned short RtaType; + u32 RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24); + + p->RIOBooting = 0; + + rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot completed - BootInProgress now %d\n", p->RIOBooting); + + /* + ** Determine type of unit (16/8 port RTA). + */ + + RtaType = GetUnitType(RtaUniq); + if (Rup >= (unsigned short) MAX_RUP) + rio_dprintk(RIO_DEBUG_BOOT, "RIO: Host %s has booted an RTA(%d) on link %c\n", HostP->Name, 8 * RtaType, readb(&PktCmdP->LinkNum) + 'A'); + else + rio_dprintk(RIO_DEBUG_BOOT, "RIO: RTA %s has booted an RTA(%d) on link %c\n", HostP->Mapping[Rup].Name, 8 * RtaType, readb(&PktCmdP->LinkNum) + 'A'); + + rio_dprintk(RIO_DEBUG_BOOT, "UniqNum is 0x%x\n", RtaUniq); + + if (RtaUniq == 0x00000000 || RtaUniq == 0xffffffff) { + rio_dprintk(RIO_DEBUG_BOOT, "Illegal RTA Uniq Number\n"); + return 1; + } + + /* + ** If this RTA has just booted an RTA which doesn't belong to this + ** system, or the system is in slave mode, do not attempt to create + ** a new table entry for it. + */ + + if (!RIOBootOk(p, HostP, RtaUniq)) { + MyLink = readb(&PktCmdP->LinkNum); + if (Rup < (unsigned short) MAX_RUP) { + /* + ** RtaUniq was clone booted (by this RTA). Instruct this RTA + ** to hold off further attempts to boot on this link for 30 + ** seconds. + */ + if (RIOSuspendBootRta(HostP, HostP->Mapping[Rup].ID, MyLink)) { + rio_dprintk(RIO_DEBUG_BOOT, "RTA failed to suspend booting on link %c\n", 'A' + MyLink); + } + } else + /* + ** RtaUniq was booted by this host. Set the booting link + ** to hold off for 30 seconds to give another unit a + ** chance to boot it. + */ + writew(30, &HostP->LinkStrP[MyLink].WaitNoBoot); + rio_dprintk(RIO_DEBUG_BOOT, "RTA %x not owned - suspend booting down link %c on unit %x\n", RtaUniq, 'A' + MyLink, HostP->Mapping[Rup].RtaUniqueNum); + return 1; + } + + /* + ** Check for a SLOT_IN_USE entry for this RTA attached to the + ** current host card in the driver table. + ** + ** If it exists, make a note that we have booted it. Other parts of + ** the driver are interested in this information at a later date, + ** in particular when the booting RTA asks for an ID for this unit, + ** we must have set the BOOTED flag, and the NEWBOOT flag is used + ** to force an open on any ports that where previously open on this + ** unit. + */ + for (entry = 0; entry < MAX_RUP; entry++) { + unsigned int sysport; + + if ((HostP->Mapping[entry].Flags & SLOT_IN_USE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) { + HostP->Mapping[entry].Flags |= RTA_BOOTED | RTA_NEWBOOT; + if ((sysport = HostP->Mapping[entry].SysPort) != NO_PORT) { + if (sysport < p->RIOFirstPortsBooted) + p->RIOFirstPortsBooted = sysport; + if (sysport > p->RIOLastPortsBooted) + p->RIOLastPortsBooted = sysport; + /* + ** For a 16 port RTA, check the second bank of 8 ports + */ + if (RtaType == TYPE_RTA16) { + entry2 = HostP->Mapping[entry].ID2 - 1; + HostP->Mapping[entry2].Flags |= RTA_BOOTED | RTA_NEWBOOT; + sysport = HostP->Mapping[entry2].SysPort; + if (sysport < p->RIOFirstPortsBooted) + p->RIOFirstPortsBooted = sysport; + if (sysport > p->RIOLastPortsBooted) + p->RIOLastPortsBooted = sysport; + } + } + if (RtaType == TYPE_RTA16) + rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given IDs %d+%d\n", entry + 1, entry2 + 1); + else + rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given ID %d\n", entry + 1); + return 1; + } + } + + rio_dprintk(RIO_DEBUG_BOOT, "RTA not configured for this host\n"); + + if (Rup >= (unsigned short) MAX_RUP) { + /* + ** It was a host that did the booting + */ + MyType = "Host"; + MyName = HostP->Name; + } else { + /* + ** It was an RTA that did the booting + */ + MyType = "RTA"; + MyName = HostP->Mapping[Rup].Name; + } + MyLink = readb(&PktCmdP->LinkNum); + + /* + ** There is no SLOT_IN_USE entry for this RTA attached to the current + ** host card in the driver table. + ** + ** Check for a SLOT_TENTATIVE entry for this RTA attached to the + ** current host card in the driver table. + ** + ** If we find one, then we re-use that slot. + */ + for (entry = 0; entry < MAX_RUP; entry++) { + if ((HostP->Mapping[entry].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) { + if (RtaType == TYPE_RTA16) { + entry2 = HostP->Mapping[entry].ID2 - 1; + if ((HostP->Mapping[entry2].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry2].RtaUniqueNum == RtaUniq)) + rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slots (%d+%d)\n", entry, entry2); + else + continue; + } else + rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slot (%d)\n", entry); + if (!p->RIONoMessage) + printk("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A'); + return 1; + } + } + + /* + ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA + ** attached to the current host card in the driver table. + ** + ** Check if there is a SLOT_IN_USE or SLOT_TENTATIVE entry on another + ** host for this RTA in the driver table. + ** + ** For a SLOT_IN_USE entry on another host, we need to delete the RTA + ** entry from the other host and add it to this host (using some of + ** the functions from table.c which do this). + ** For a SLOT_TENTATIVE entry on another host, we must cope with the + ** following scenario: + ** + ** + Plug 8 port RTA into host A. (This creates SLOT_TENTATIVE entry + ** in table) + ** + Unplug RTA and plug into host B. (We now have 2 SLOT_TENTATIVE + ** entries) + ** + Configure RTA on host B. (This slot now becomes SLOT_IN_USE) + ** + Unplug RTA and plug back into host A. + ** + Configure RTA on host A. We now have the same RTA configured + ** with different ports on two different hosts. + */ + rio_dprintk(RIO_DEBUG_BOOT, "Have we seen RTA %x before?\n", RtaUniq); + found = 0; + Flag = 0; /* Convince the compiler this variable is initialized */ + for (host = 0; !found && (host < p->RIONumHosts); host++) { + for (rta = 0; rta < MAX_RUP; rta++) { + if ((p->RIOHosts[host].Mapping[rta].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (p->RIOHosts[host].Mapping[rta].RtaUniqueNum == RtaUniq)) { + Flag = p->RIOHosts[host].Mapping[rta].Flags; + MapP = &p->RIOHosts[host].Mapping[rta]; + if (RtaType == TYPE_RTA16) { + MapP2 = &p->RIOHosts[host].Mapping[MapP->ID2 - 1]; + rio_dprintk(RIO_DEBUG_BOOT, "This RTA is units %d+%d from host %s\n", rta + 1, MapP->ID2, p->RIOHosts[host].Name); + } else + rio_dprintk(RIO_DEBUG_BOOT, "This RTA is unit %d from host %s\n", rta + 1, p->RIOHosts[host].Name); + found = 1; + break; + } + } + } + + /* + ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA + ** attached to the current host card in the driver table. + ** + ** If we have not found a SLOT_IN_USE or SLOT_TENTATIVE entry on + ** another host for this RTA in the driver table... + ** + ** Check for a SLOT_IN_USE entry for this RTA in the config table. + */ + if (!MapP) { + rio_dprintk(RIO_DEBUG_BOOT, "Look for RTA %x in RIOSavedTable\n", RtaUniq); + for (rta = 0; rta < TOTAL_MAP_ENTRIES; rta++) { + rio_dprintk(RIO_DEBUG_BOOT, "Check table entry %d (%x)", rta, p->RIOSavedTable[rta].RtaUniqueNum); + + if ((p->RIOSavedTable[rta].Flags & SLOT_IN_USE) && (p->RIOSavedTable[rta].RtaUniqueNum == RtaUniq)) { + MapP = &p->RIOSavedTable[rta]; + Flag = p->RIOSavedTable[rta].Flags; + if (RtaType == TYPE_RTA16) { + for (entry2 = rta + 1; entry2 < TOTAL_MAP_ENTRIES; entry2++) { + if (p->RIOSavedTable[entry2].RtaUniqueNum == RtaUniq) + break; + } + MapP2 = &p->RIOSavedTable[entry2]; + rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entries %d+%d\n", rta, entry2); + } else + rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entry %d\n", rta); + break; + } + } + } + + /* + ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA + ** attached to the current host card in the driver table. + ** + ** We may have found a SLOT_IN_USE entry on another host for this + ** RTA in the config table, or a SLOT_IN_USE or SLOT_TENTATIVE entry + ** on another host for this RTA in the driver table. + ** + ** Check the driver table for room to fit this newly discovered RTA. + ** RIOFindFreeID() first looks for free slots and if it does not + ** find any free slots it will then attempt to oust any + ** tentative entry in the table. + */ + EmptySlot = 1; + if (RtaType == TYPE_RTA16) { + if (RIOFindFreeID(p, HostP, &entry, &entry2) == 0) { + RIODefaultName(p, HostP, entry); + rio_fill_host_slot(entry, entry2, RtaUniq, HostP); + EmptySlot = 0; + } + } else { + if (RIOFindFreeID(p, HostP, &entry, NULL) == 0) { + RIODefaultName(p, HostP, entry); + rio_fill_host_slot(entry, 0, RtaUniq, HostP); + EmptySlot = 0; + } + } + + /* + ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA + ** attached to the current host card in the driver table. + ** + ** If we found a SLOT_IN_USE entry on another host for this + ** RTA in the config or driver table, and there are enough free + ** slots in the driver table, then we need to move it over and + ** delete it from the other host. + ** If we found a SLOT_TENTATIVE entry on another host for this + ** RTA in the driver table, just delete the other host entry. + */ + if (EmptySlot == 0) { + if (MapP) { + if (Flag & SLOT_IN_USE) { + rio_dprintk(RIO_DEBUG_BOOT, "This RTA configured on another host - move entry to current host (1)\n"); + HostP->Mapping[entry].SysPort = MapP->SysPort; + memcpy(HostP->Mapping[entry].Name, MapP->Name, MAX_NAME_LEN); + HostP->Mapping[entry].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT; + RIOReMapPorts(p, HostP, &HostP->Mapping[entry]); + if (HostP->Mapping[entry].SysPort < p->RIOFirstPortsBooted) + p->RIOFirstPortsBooted = HostP->Mapping[entry].SysPort; + if (HostP->Mapping[entry].SysPort > p->RIOLastPortsBooted) + p->RIOLastPortsBooted = HostP->Mapping[entry].SysPort; + rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) MapP->SysPort, MapP->Name); + } else { + rio_dprintk(RIO_DEBUG_BOOT, "This RTA has a tentative entry on another host - delete that entry (1)\n"); + HostP->Mapping[entry].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT; + } + if (RtaType == TYPE_RTA16) { + if (Flag & SLOT_IN_USE) { + HostP->Mapping[entry2].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT; + HostP->Mapping[entry2].SysPort = MapP2->SysPort; + /* + ** Map second block of ttys for 16 port RTA + */ + RIOReMapPorts(p, HostP, &HostP->Mapping[entry2]); + if (HostP->Mapping[entry2].SysPort < p->RIOFirstPortsBooted) + p->RIOFirstPortsBooted = HostP->Mapping[entry2].SysPort; + if (HostP->Mapping[entry2].SysPort > p->RIOLastPortsBooted) + p->RIOLastPortsBooted = HostP->Mapping[entry2].SysPort; + rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) HostP->Mapping[entry2].SysPort, HostP->Mapping[entry].Name); + } else + HostP->Mapping[entry2].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT; + memset(MapP2, 0, sizeof(struct Map)); + } + memset(MapP, 0, sizeof(struct Map)); + if (!p->RIONoMessage) + printk("An orphaned RTA has been adopted by %s '%s' (%c).\n", MyType, MyName, MyLink + 'A'); + } else if (!p->RIONoMessage) + printk("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A'); + RIOSetChange(p); + return 1; + } + + /* + ** There is no room in the driver table to make an entry for the + ** booted RTA. Keep a note of its Uniq Num in the overflow table, + ** so we can ignore it's ID requests. + */ + if (!p->RIONoMessage) + printk("The RTA connected to %s '%s' (%c) cannot be configured. You cannot configure more than 128 ports to one host card.\n", MyType, MyName, MyLink + 'A'); + for (entry = 0; entry < HostP->NumExtraBooted; entry++) { + if (HostP->ExtraUnits[entry] == RtaUniq) { + /* + ** already got it! + */ + return 1; + } + } + /* + ** If there is room, add the unit to the list of extras + */ + if (HostP->NumExtraBooted < MAX_EXTRA_UNITS) + HostP->ExtraUnits[HostP->NumExtraBooted++] = RtaUniq; + return 1; +} + + +/* +** If the RTA or its host appears in the RIOBindTab[] structure then +** we mustn't boot the RTA and should return 0. +** This operation is slightly different from the other drivers for RIO +** in that this is designed to work with the new utilities +** not config.rio and is FAR SIMPLER. +** We no longer support the RIOBootMode variable. It is all done from the +** "boot/noboot" field in the rio.cf file. +*/ +int RIOBootOk(struct rio_info *p, struct Host *HostP, unsigned long RtaUniq) +{ + int Entry; + unsigned int HostUniq = HostP->UniqueNum; + + /* + ** Search bindings table for RTA or its parent. + ** If it exists, return 0, else 1. + */ + for (Entry = 0; (Entry < MAX_RTA_BINDINGS) && (p->RIOBindTab[Entry] != 0); Entry++) { + if ((p->RIOBindTab[Entry] == HostUniq) || (p->RIOBindTab[Entry] == RtaUniq)) + return 0; + } + return 1; +} + +/* +** Make an empty slot tentative. If this is a 16 port RTA, make both +** slots tentative, and the second one RTA_SECOND_SLOT as well. +*/ + +void rio_fill_host_slot(int entry, int entry2, unsigned int rta_uniq, struct Host *host) +{ + int link; + + rio_dprintk(RIO_DEBUG_BOOT, "rio_fill_host_slot(%d, %d, 0x%x...)\n", entry, entry2, rta_uniq); + + host->Mapping[entry].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE); + host->Mapping[entry].SysPort = NO_PORT; + host->Mapping[entry].RtaUniqueNum = rta_uniq; + host->Mapping[entry].HostUniqueNum = host->UniqueNum; + host->Mapping[entry].ID = entry + 1; + host->Mapping[entry].ID2 = 0; + if (entry2) { + host->Mapping[entry2].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE | RTA16_SECOND_SLOT); + host->Mapping[entry2].SysPort = NO_PORT; + host->Mapping[entry2].RtaUniqueNum = rta_uniq; + host->Mapping[entry2].HostUniqueNum = host->UniqueNum; + host->Mapping[entry2].Name[0] = '\0'; + host->Mapping[entry2].ID = entry2 + 1; + host->Mapping[entry2].ID2 = entry + 1; + host->Mapping[entry].ID2 = entry2 + 1; + } + /* + ** Must set these up, so that utilities show + ** topology of 16 port RTAs correctly + */ + for (link = 0; link < LINKS_PER_UNIT; link++) { + host->Mapping[entry].Topology[link].Unit = ROUTE_DISCONNECT; + host->Mapping[entry].Topology[link].Link = NO_LINK; + if (entry2) { + host->Mapping[entry2].Topology[link].Unit = ROUTE_DISCONNECT; + host->Mapping[entry2].Topology[link].Link = NO_LINK; + } + } +} diff --git a/drivers/staging/generic_serial/rio/riocmd.c b/drivers/staging/generic_serial/rio/riocmd.c new file mode 100644 index 000000000000..f121357e5af0 --- /dev/null +++ b/drivers/staging/generic_serial/rio/riocmd.c @@ -0,0 +1,939 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** ported from the existing SCO driver source +** + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : riocmd.c +** SID : 1.2 +** Last Modified : 11/6/98 10:33:41 +** Retrieved : 11/6/98 10:33:49 +** +** ident @(#)riocmd.c 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include "linux_compat.h" +#include "rio_linux.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" + + +static struct IdentifyRta IdRta; +static struct KillNeighbour KillUnit; + +int RIOFoadRta(struct Host *HostP, struct Map *MapP) +{ + struct CmdBlk *CmdBlkP; + + rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA\n"); + + CmdBlkP = RIOGetCmdBlk(); + + if (!CmdBlkP) { + rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: GetCmdBlk failed\n"); + return -ENXIO; + } + + CmdBlkP->Packet.dest_unit = MapP->ID; + CmdBlkP->Packet.dest_port = BOOT_RUP; + CmdBlkP->Packet.src_unit = 0; + CmdBlkP->Packet.src_port = BOOT_RUP; + CmdBlkP->Packet.len = 0x84; + CmdBlkP->Packet.data[0] = IFOAD; + CmdBlkP->Packet.data[1] = 0; + CmdBlkP->Packet.data[2] = IFOAD_MAGIC & 0xFF; + CmdBlkP->Packet.data[3] = (IFOAD_MAGIC >> 8) & 0xFF; + + if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: Failed to queue foad command\n"); + return -EIO; + } + return 0; +} + +int RIOZombieRta(struct Host *HostP, struct Map *MapP) +{ + struct CmdBlk *CmdBlkP; + + rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA\n"); + + CmdBlkP = RIOGetCmdBlk(); + + if (!CmdBlkP) { + rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: GetCmdBlk failed\n"); + return -ENXIO; + } + + CmdBlkP->Packet.dest_unit = MapP->ID; + CmdBlkP->Packet.dest_port = BOOT_RUP; + CmdBlkP->Packet.src_unit = 0; + CmdBlkP->Packet.src_port = BOOT_RUP; + CmdBlkP->Packet.len = 0x84; + CmdBlkP->Packet.data[0] = ZOMBIE; + CmdBlkP->Packet.data[1] = 0; + CmdBlkP->Packet.data[2] = ZOMBIE_MAGIC & 0xFF; + CmdBlkP->Packet.data[3] = (ZOMBIE_MAGIC >> 8) & 0xFF; + + if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: Failed to queue zombie command\n"); + return -EIO; + } + return 0; +} + +int RIOCommandRta(struct rio_info *p, unsigned long RtaUnique, int (*func) (struct Host * HostP, struct Map * MapP)) +{ + unsigned int Host; + + rio_dprintk(RIO_DEBUG_CMD, "Command RTA 0x%lx func %p\n", RtaUnique, func); + + if (!RtaUnique) + return (0); + + for (Host = 0; Host < p->RIONumHosts; Host++) { + unsigned int Rta; + struct Host *HostP = &p->RIOHosts[Host]; + + for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) { + struct Map *MapP = &HostP->Mapping[Rta]; + + if (MapP->RtaUniqueNum == RtaUnique) { + uint Link; + + /* + ** now, lets just check we have a route to it... + ** IF the routing stuff is working, then one of the + ** topology entries for this unit will have a legit + ** route *somewhere*. We care not where - if its got + ** any connections, we can get to it. + */ + for (Link = 0; Link < LINKS_PER_UNIT; Link++) { + if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) { + /* + ** Its worth trying the operation... + */ + return (*func) (HostP, MapP); + } + } + } + } + } + return -ENXIO; +} + + +int RIOIdentifyRta(struct rio_info *p, void __user * arg) +{ + unsigned int Host; + + if (copy_from_user(&IdRta, arg, sizeof(IdRta))) { + rio_dprintk(RIO_DEBUG_CMD, "RIO_IDENTIFY_RTA copy failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + + for (Host = 0; Host < p->RIONumHosts; Host++) { + unsigned int Rta; + struct Host *HostP = &p->RIOHosts[Host]; + + for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) { + struct Map *MapP = &HostP->Mapping[Rta]; + + if (MapP->RtaUniqueNum == IdRta.RtaUnique) { + uint Link; + /* + ** now, lets just check we have a route to it... + ** IF the routing stuff is working, then one of the + ** topology entries for this unit will have a legit + ** route *somewhere*. We care not where - if its got + ** any connections, we can get to it. + */ + for (Link = 0; Link < LINKS_PER_UNIT; Link++) { + if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) { + /* + ** Its worth trying the operation... + */ + struct CmdBlk *CmdBlkP; + + rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA\n"); + + CmdBlkP = RIOGetCmdBlk(); + + if (!CmdBlkP) { + rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: GetCmdBlk failed\n"); + return -ENXIO; + } + + CmdBlkP->Packet.dest_unit = MapP->ID; + CmdBlkP->Packet.dest_port = BOOT_RUP; + CmdBlkP->Packet.src_unit = 0; + CmdBlkP->Packet.src_port = BOOT_RUP; + CmdBlkP->Packet.len = 0x84; + CmdBlkP->Packet.data[0] = IDENTIFY; + CmdBlkP->Packet.data[1] = 0; + CmdBlkP->Packet.data[2] = IdRta.ID; + + if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: Failed to queue command\n"); + return -EIO; + } + return 0; + } + } + } + } + } + return -ENOENT; +} + + +int RIOKillNeighbour(struct rio_info *p, void __user * arg) +{ + uint Host; + uint ID; + struct Host *HostP; + struct CmdBlk *CmdBlkP; + + rio_dprintk(RIO_DEBUG_CMD, "KILL HOST NEIGHBOUR\n"); + + if (copy_from_user(&KillUnit, arg, sizeof(KillUnit))) { + rio_dprintk(RIO_DEBUG_CMD, "RIO_KILL_NEIGHBOUR copy failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + + if (KillUnit.Link > 3) + return -ENXIO; + + CmdBlkP = RIOGetCmdBlk(); + + if (!CmdBlkP) { + rio_dprintk(RIO_DEBUG_CMD, "UFOAD: GetCmdBlk failed\n"); + return -ENXIO; + } + + CmdBlkP->Packet.dest_unit = 0; + CmdBlkP->Packet.src_unit = 0; + CmdBlkP->Packet.dest_port = BOOT_RUP; + CmdBlkP->Packet.src_port = BOOT_RUP; + CmdBlkP->Packet.len = 0x84; + CmdBlkP->Packet.data[0] = UFOAD; + CmdBlkP->Packet.data[1] = KillUnit.Link; + CmdBlkP->Packet.data[2] = UFOAD_MAGIC & 0xFF; + CmdBlkP->Packet.data[3] = (UFOAD_MAGIC >> 8) & 0xFF; + + for (Host = 0; Host < p->RIONumHosts; Host++) { + ID = 0; + HostP = &p->RIOHosts[Host]; + + if (HostP->UniqueNum == KillUnit.UniqueNum) { + if (RIOQueueCmdBlk(HostP, RTAS_PER_HOST + KillUnit.Link, CmdBlkP) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n"); + return -EIO; + } + return 0; + } + + for (ID = 0; ID < RTAS_PER_HOST; ID++) { + if (HostP->Mapping[ID].RtaUniqueNum == KillUnit.UniqueNum) { + CmdBlkP->Packet.dest_unit = ID + 1; + if (RIOQueueCmdBlk(HostP, ID, CmdBlkP) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n"); + return -EIO; + } + return 0; + } + } + } + RIOFreeCmdBlk(CmdBlkP); + return -ENXIO; +} + +int RIOSuspendBootRta(struct Host *HostP, int ID, int Link) +{ + struct CmdBlk *CmdBlkP; + + rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA ID %d, link %c\n", ID, 'A' + Link); + + CmdBlkP = RIOGetCmdBlk(); + + if (!CmdBlkP) { + rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: GetCmdBlk failed\n"); + return -ENXIO; + } + + CmdBlkP->Packet.dest_unit = ID; + CmdBlkP->Packet.dest_port = BOOT_RUP; + CmdBlkP->Packet.src_unit = 0; + CmdBlkP->Packet.src_port = BOOT_RUP; + CmdBlkP->Packet.len = 0x84; + CmdBlkP->Packet.data[0] = IWAIT; + CmdBlkP->Packet.data[1] = Link; + CmdBlkP->Packet.data[2] = IWAIT_MAGIC & 0xFF; + CmdBlkP->Packet.data[3] = (IWAIT_MAGIC >> 8) & 0xFF; + + if (RIOQueueCmdBlk(HostP, ID - 1, CmdBlkP) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: Failed to queue iwait command\n"); + return -EIO; + } + return 0; +} + +int RIOFoadWakeup(struct rio_info *p) +{ + int port; + struct Port *PortP; + unsigned long flags; + + for (port = 0; port < RIO_PORTS; port++) { + PortP = p->RIOPortp[port]; + + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->Config = 0; + PortP->State = 0; + PortP->InUse = NOT_INUSE; + PortP->PortState = 0; + PortP->FlushCmdBodge = 0; + PortP->ModemLines = 0; + PortP->ModemState = 0; + PortP->CookMode = 0; + PortP->ParamSem = 0; + PortP->Mapped = 0; + PortP->WflushFlag = 0; + PortP->MagicFlags = 0; + PortP->RxDataStart = 0; + PortP->TxBufferIn = 0; + PortP->TxBufferOut = 0; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + } + return (0); +} + +/* +** Incoming command on the COMMAND_RUP to be processed. +*/ +static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struct PKT __iomem *PacketP) +{ + struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *)PacketP->data; + struct Port *PortP; + struct UnixRup *UnixRupP; + unsigned short SysPort; + unsigned short ReportedModemStatus; + unsigned short rup; + unsigned short subCommand; + unsigned long flags; + + func_enter(); + + /* + ** 16 port RTA note: + ** Command rup packets coming from the RTA will have pkt->data[1] (which + ** translates to PktCmdP->PhbNum) set to the host port number for the + ** particular unit. To access the correct BaseSysPort for a 16 port RTA, + ** we can use PhbNum to get the rup number for the appropriate 8 port + ** block (for the first block, this should be equal to 'Rup'). + */ + rup = readb(&PktCmdP->PhbNum) / (unsigned short) PORTS_PER_RTA; + UnixRupP = &HostP->UnixRups[rup]; + SysPort = UnixRupP->BaseSysPort + (readb(&PktCmdP->PhbNum) % (unsigned short) PORTS_PER_RTA); + rio_dprintk(RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort); + + if (UnixRupP->BaseSysPort == NO_PORT) { + rio_dprintk(RIO_DEBUG_CMD, "OBSCURE ERROR!\n"); + rio_dprintk(RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n"); + rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Host number %Zd, name ``%s''\n", HostP - p->RIOHosts, HostP->Name); + rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Rup number 0x%x\n", rup); + + if (Rup < (unsigned short) MAX_RUP) { + rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for RTA ``%s''\n", HostP->Mapping[Rup].Name); + } else + rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for link ``%c'' of host ``%s''\n", ('A' + Rup - MAX_RUP), HostP->Name); + + rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Destination 0x%x:0x%x\n", readb(&PacketP->dest_unit), readb(&PacketP->dest_port)); + rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Source 0x%x:0x%x\n", readb(&PacketP->src_unit), readb(&PacketP->src_port)); + rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Length 0x%x (%d)\n", readb(&PacketP->len), readb(&PacketP->len)); + rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Control 0x%x (%d)\n", readb(&PacketP->control), readb(&PacketP->control)); + rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Check 0x%x (%d)\n", readw(&PacketP->csum), readw(&PacketP->csum)); + rio_dprintk(RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, " "Command Code 0x%x\n", readb(&PktCmdP->PhbNum), readb(&PktCmdP->Command)); + return 1; + } + PortP = p->RIOPortp[SysPort]; + rio_spin_lock_irqsave(&PortP->portSem, flags); + switch (readb(&PktCmdP->Command)) { + case RIOC_BREAK_RECEIVED: + rio_dprintk(RIO_DEBUG_CMD, "Received a break!\n"); + /* If the current line disc. is not multi-threading and + the current processor is not the default, reset rup_intr + and return 0 to ensure that the command packet is + not freed. */ + /* Call tmgr HANGUP HERE */ + /* Fix this later when every thing works !!!! RAMRAJ */ + gs_got_break(&PortP->gs); + break; + + case RIOC_COMPLETE: + rio_dprintk(RIO_DEBUG_CMD, "Command complete on phb %d host %Zd\n", readb(&PktCmdP->PhbNum), HostP - p->RIOHosts); + subCommand = 1; + switch (readb(&PktCmdP->SubCommand)) { + case RIOC_MEMDUMP: + rio_dprintk(RIO_DEBUG_CMD, "Memory dump cmd (0x%x) from addr 0x%x\n", readb(&PktCmdP->SubCommand), readw(&PktCmdP->SubAddr)); + break; + case RIOC_READ_REGISTER: + rio_dprintk(RIO_DEBUG_CMD, "Read register (0x%x)\n", readw(&PktCmdP->SubAddr)); + p->CdRegister = (readb(&PktCmdP->ModemStatus) & RIOC_MSVR1_HOST); + break; + default: + subCommand = 0; + break; + } + if (subCommand) + break; + rio_dprintk(RIO_DEBUG_CMD, "New status is 0x%x was 0x%x\n", readb(&PktCmdP->PortStatus), PortP->PortState); + if (PortP->PortState != readb(&PktCmdP->PortStatus)) { + rio_dprintk(RIO_DEBUG_CMD, "Mark status & wakeup\n"); + PortP->PortState = readb(&PktCmdP->PortStatus); + /* What should we do here ... + wakeup( &PortP->PortState ); + */ + } else + rio_dprintk(RIO_DEBUG_CMD, "No change\n"); + + /* FALLTHROUGH */ + case RIOC_MODEM_STATUS: + /* + ** Knock out the tbusy and tstop bits, as these are not relevant + ** to the check for modem status change (they're just there because + ** it's a convenient place to put them!). + */ + ReportedModemStatus = readb(&PktCmdP->ModemStatus); + if ((PortP->ModemState & RIOC_MSVR1_HOST) == + (ReportedModemStatus & RIOC_MSVR1_HOST)) { + rio_dprintk(RIO_DEBUG_CMD, "Modem status unchanged 0x%x\n", PortP->ModemState); + /* + ** Update ModemState just in case tbusy or tstop states have + ** changed. + */ + PortP->ModemState = ReportedModemStatus; + } else { + rio_dprintk(RIO_DEBUG_CMD, "Modem status change from 0x%x to 0x%x\n", PortP->ModemState, ReportedModemStatus); + PortP->ModemState = ReportedModemStatus; +#ifdef MODEM_SUPPORT + if (PortP->Mapped) { + /***********************************************************\ + ************************************************************* + *** *** + *** M O D E M S T A T E C H A N G E *** + *** *** + ************************************************************* + \***********************************************************/ + /* + ** If the device is a modem, then check the modem + ** carrier. + */ + if (PortP->gs.port.tty == NULL) + break; + if (PortP->gs.port.tty->termios == NULL) + break; + + if (!(PortP->gs.port.tty->termios->c_cflag & CLOCAL) && ((PortP->State & (RIO_MOPEN | RIO_WOPEN)))) { + + rio_dprintk(RIO_DEBUG_CMD, "Is there a Carrier?\n"); + /* + ** Is there a carrier? + */ + if (PortP->ModemState & RIOC_MSVR1_CD) { + /* + ** Has carrier just appeared? + */ + if (!(PortP->State & RIO_CARR_ON)) { + rio_dprintk(RIO_DEBUG_CMD, "Carrier just came up.\n"); + PortP->State |= RIO_CARR_ON; + /* + ** wakeup anyone in WOPEN + */ + if (PortP->State & (PORT_ISOPEN | RIO_WOPEN)) + wake_up_interruptible(&PortP->gs.port.open_wait); + } + } else { + /* + ** Has carrier just dropped? + */ + if (PortP->State & RIO_CARR_ON) { + if (PortP->State & (PORT_ISOPEN | RIO_WOPEN | RIO_MOPEN)) + tty_hangup(PortP->gs.port.tty); + PortP->State &= ~RIO_CARR_ON; + rio_dprintk(RIO_DEBUG_CMD, "Carrirer just went down\n"); + } + } + } + } +#endif + } + break; + + default: + rio_dprintk(RIO_DEBUG_CMD, "Unknown command %d on CMD_RUP of host %Zd\n", readb(&PktCmdP->Command), HostP - p->RIOHosts); + break; + } + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + + func_exit(); + + return 1; +} + +/* +** The command mechanism: +** Each rup has a chain of commands associated with it. +** This chain is maintained by routines in this file. +** Periodically we are called and we run a quick check of all the +** active chains to determine if there is a command to be executed, +** and if the rup is ready to accept it. +** +*/ + +/* +** Allocate an empty command block. +*/ +struct CmdBlk *RIOGetCmdBlk(void) +{ + struct CmdBlk *CmdBlkP; + + CmdBlkP = kzalloc(sizeof(struct CmdBlk), GFP_ATOMIC); + return CmdBlkP; +} + +/* +** Return a block to the head of the free list. +*/ +void RIOFreeCmdBlk(struct CmdBlk *CmdBlkP) +{ + kfree(CmdBlkP); +} + +/* +** attach a command block to the list of commands to be performed for +** a given rup. +*/ +int RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP) +{ + struct CmdBlk **Base; + struct UnixRup *UnixRupP; + unsigned long flags; + + if (Rup >= (unsigned short) (MAX_RUP + LINKS_PER_UNIT)) { + rio_dprintk(RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n", Rup); + RIOFreeCmdBlk(CmdBlkP); + return RIO_FAIL; + } + + UnixRupP = &HostP->UnixRups[Rup]; + + rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); + + /* + ** If the RUP is currently inactive, then put the request + ** straight on the RUP.... + */ + if ((UnixRupP->CmdsWaitingP == NULL) && (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE) && (CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) + : 1)) { + rio_dprintk(RIO_DEBUG_CMD, "RUP inactive-placing command straight on. Cmd byte is 0x%x\n", CmdBlkP->Packet.data[0]); + + /* + ** Whammy! blat that pack! + */ + HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT)); + + /* + ** place command packet on the pending position. + */ + UnixRupP->CmdPendingP = CmdBlkP; + + /* + ** set the command register + */ + writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol); + + rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); + + return 0; + } + rio_dprintk(RIO_DEBUG_CMD, "RUP active - en-queing\n"); + + if (UnixRupP->CmdsWaitingP != NULL) + rio_dprintk(RIO_DEBUG_CMD, "Rup active - command waiting\n"); + if (UnixRupP->CmdPendingP != NULL) + rio_dprintk(RIO_DEBUG_CMD, "Rup active - command pending\n"); + if (readw(&UnixRupP->RupP->txcontrol) != TX_RUP_INACTIVE) + rio_dprintk(RIO_DEBUG_CMD, "Rup active - command rup not ready\n"); + + Base = &UnixRupP->CmdsWaitingP; + + rio_dprintk(RIO_DEBUG_CMD, "First try to queue cmdblk %p at %p\n", CmdBlkP, Base); + + while (*Base) { + rio_dprintk(RIO_DEBUG_CMD, "Command cmdblk %p here\n", *Base); + Base = &((*Base)->NextP); + rio_dprintk(RIO_DEBUG_CMD, "Now try to queue cmd cmdblk %p at %p\n", CmdBlkP, Base); + } + + rio_dprintk(RIO_DEBUG_CMD, "Will queue cmdblk %p at %p\n", CmdBlkP, Base); + + *Base = CmdBlkP; + + CmdBlkP->NextP = NULL; + + rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); + + return 0; +} + +/* +** Here we go - if there is an empty rup, fill it! +** must be called at splrio() or higher. +*/ +void RIOPollHostCommands(struct rio_info *p, struct Host *HostP) +{ + struct CmdBlk *CmdBlkP; + struct UnixRup *UnixRupP; + struct PKT __iomem *PacketP; + unsigned short Rup; + unsigned long flags; + + + Rup = MAX_RUP + LINKS_PER_UNIT; + + do { /* do this loop for each RUP */ + /* + ** locate the rup we are processing & lock it + */ + UnixRupP = &HostP->UnixRups[--Rup]; + + spin_lock_irqsave(&UnixRupP->RupLock, flags); + + /* + ** First check for incoming commands: + */ + if (readw(&UnixRupP->RupP->rxcontrol) != RX_RUP_INACTIVE) { + int FreeMe; + + PacketP = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->rxpkt)); + + switch (readb(&PacketP->dest_port)) { + case BOOT_RUP: + rio_dprintk(RIO_DEBUG_CMD, "Incoming Boot %s packet '%x'\n", readb(&PacketP->len) & 0x80 ? "Command" : "Data", readb(&PacketP->data[0])); + rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); + FreeMe = RIOBootRup(p, Rup, HostP, PacketP); + rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); + break; + + case COMMAND_RUP: + /* + ** Free the RUP lock as loss of carrier causes a + ** ttyflush which will (eventually) call another + ** routine that uses the RUP lock. + */ + rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); + FreeMe = RIOCommandRup(p, Rup, HostP, PacketP); + if (readb(&PacketP->data[5]) == RIOC_MEMDUMP) { + rio_dprintk(RIO_DEBUG_CMD, "Memdump from 0x%x complete\n", readw(&(PacketP->data[6]))); + rio_memcpy_fromio(p->RIOMemDump, &(PacketP->data[8]), 32); + } + rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); + break; + + case ROUTE_RUP: + rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); + FreeMe = RIORouteRup(p, Rup, HostP, PacketP); + rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); + break; + + default: + rio_dprintk(RIO_DEBUG_CMD, "Unknown RUP %d\n", readb(&PacketP->dest_port)); + FreeMe = 1; + break; + } + + if (FreeMe) { + rio_dprintk(RIO_DEBUG_CMD, "Free processed incoming command packet\n"); + put_free_end(HostP, PacketP); + + writew(RX_RUP_INACTIVE, &UnixRupP->RupP->rxcontrol); + + if (readw(&UnixRupP->RupP->handshake) == PHB_HANDSHAKE_SET) { + rio_dprintk(RIO_DEBUG_CMD, "Handshake rup %d\n", Rup); + writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &UnixRupP->RupP->handshake); + } + } + } + + /* + ** IF a command was running on the port, + ** and it has completed, then tidy it up. + */ + if ((CmdBlkP = UnixRupP->CmdPendingP) && /* ASSIGN! */ + (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) { + /* + ** we are idle. + ** there is a command in pending. + ** Therefore, this command has finished. + ** So, wakeup whoever is waiting for it (and tell them + ** what happened). + */ + if (CmdBlkP->Packet.dest_port == BOOT_RUP) + rio_dprintk(RIO_DEBUG_CMD, "Free Boot %s Command Block '%x'\n", CmdBlkP->Packet.len & 0x80 ? "Command" : "Data", CmdBlkP->Packet.data[0]); + + rio_dprintk(RIO_DEBUG_CMD, "Command %p completed\n", CmdBlkP); + + /* + ** Clear the Rup lock to prevent mutual exclusion. + */ + if (CmdBlkP->PostFuncP) { + rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); + (*CmdBlkP->PostFuncP) (CmdBlkP->PostArg, CmdBlkP); + rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); + } + + /* + ** ....clear the pending flag.... + */ + UnixRupP->CmdPendingP = NULL; + + /* + ** ....and return the command block to the freelist. + */ + RIOFreeCmdBlk(CmdBlkP); + } + + /* + ** If there is a command for this rup, and the rup + ** is idle, then process the command + */ + if ((CmdBlkP = UnixRupP->CmdsWaitingP) && /* ASSIGN! */ + (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) { + /* + ** if the pre-function is non-zero, call it. + ** If it returns RIO_FAIL then don't + ** send this command yet! + */ + if (!(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) : 1)) { + rio_dprintk(RIO_DEBUG_CMD, "Not ready to start command %p\n", CmdBlkP); + } else { + rio_dprintk(RIO_DEBUG_CMD, "Start new command %p Cmd byte is 0x%x\n", CmdBlkP, CmdBlkP->Packet.data[0]); + /* + ** Whammy! blat that pack! + */ + HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT)); + + /* + ** remove the command from the rup command queue... + */ + UnixRupP->CmdsWaitingP = CmdBlkP->NextP; + + /* + ** ...and place it on the pending position. + */ + UnixRupP->CmdPendingP = CmdBlkP; + + /* + ** set the command register + */ + writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol); + + /* + ** the command block will be freed + ** when the command has been processed. + */ + } + } + spin_unlock_irqrestore(&UnixRupP->RupLock, flags); + } while (Rup); +} + +int RIOWFlushMark(unsigned long iPortP, struct CmdBlk *CmdBlkP) +{ + struct Port *PortP = (struct Port *) iPortP; + unsigned long flags; + + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->WflushFlag++; + PortP->MagicFlags |= MAGIC_FLUSH; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return RIOUnUse(iPortP, CmdBlkP); +} + +int RIORFlushEnable(unsigned long iPortP, struct CmdBlk *CmdBlkP) +{ + struct Port *PortP = (struct Port *) iPortP; + struct PKT __iomem *PacketP; + unsigned long flags; + + rio_spin_lock_irqsave(&PortP->portSem, flags); + + while (can_remove_receive(&PacketP, PortP)) { + remove_receive(PortP); + put_free_end(PortP->HostP, PacketP); + } + + if (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET) { + /* + ** MAGIC! (Basically, handshake the RX buffer, so that + ** the RTAs upstream can be re-enabled.) + */ + rio_dprintk(RIO_DEBUG_CMD, "Util: Set RX handshake bit\n"); + writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake); + } + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return RIOUnUse(iPortP, CmdBlkP); +} + +int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP) +{ + struct Port *PortP = (struct Port *) iPortP; + unsigned long flags; + + rio_spin_lock_irqsave(&PortP->portSem, flags); + + rio_dprintk(RIO_DEBUG_CMD, "Decrement in use count for port\n"); + + if (PortP->InUse) { + if (--PortP->InUse != NOT_INUSE) { + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return 0; + } + } + /* + ** While PortP->InUse is set (i.e. a preemptive command has been sent to + ** the RTA and is awaiting completion), any transmit data is prevented from + ** being transferred from the write queue into the transmit packets + ** (add_transmit) and no furthur transmit interrupt will be sent for that + ** data. The next interrupt will occur up to 500ms later (RIOIntr is called + ** twice a second as a saftey measure). This was the case when kermit was + ** used to send data into a RIO port. After each packet was sent, TCFLSH + ** was called to flush the read queue preemptively. PortP->InUse was + ** incremented, thereby blocking the 6 byte acknowledgement packet + ** transmitted back. This acknowledgment hung around for 500ms before + ** being sent, thus reducing input performance substantially!. + ** When PortP->InUse becomes NOT_INUSE, we must ensure that any data + ** hanging around in the transmit buffer is sent immediately. + */ + writew(1, &PortP->HostP->ParmMapP->tx_intr); + /* What to do here .. + wakeup( (caddr_t)&(PortP->InUse) ); + */ + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return 0; +} + +/* +** +** How to use this file: +** +** To send a command down a rup, you need to allocate a command block, fill +** in the packet information, fill in the command number, fill in the pre- +** and post- functions and arguments, and then add the command block to the +** queue of command blocks for the port in question. When the port is idle, +** then the pre-function will be called. If this returns RIO_FAIL then the +** command will be re-queued and tried again at a later date (probably in one +** clock tick). If the pre-function returns NOT RIO_FAIL, then the command +** packet will be queued on the RUP, and the txcontrol field set to the +** command number. When the txcontrol field has changed from being the +** command number, then the post-function will be called, with the argument +** specified earlier, a pointer to the command block, and the value of +** txcontrol. +** +** To allocate a command block, call RIOGetCmdBlk(). This returns a pointer +** to the command block structure allocated, or NULL if there aren't any. +** The block will have been zeroed for you. +** +** The structure has the following fields: +** +** struct CmdBlk +** { +** struct CmdBlk *NextP; ** Pointer to next command block ** +** struct PKT Packet; ** A packet, to copy to the rup ** +** int (*PreFuncP)(); ** The func to call to check if OK ** +** int PreArg; ** The arg for the func ** +** int (*PostFuncP)(); ** The func to call when completed ** +** int PostArg; ** The arg for the func ** +** }; +** +** You need to fill in ALL fields EXCEPT NextP, which is used to link the +** blocks together either on the free list or on the Rup list. +** +** Packet is an actual packet structure to be filled in with the packet +** information associated with the command. You need to fill in everything, +** as the command processor doesn't process the command packet in any way. +** +** The PreFuncP is called before the packet is enqueued on the host rup. +** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must +** return !RIO_FAIL to have the packet queued on the rup, and RIO_FAIL +** if the packet is NOT to be queued. +** +** The PostFuncP is called when the command has completed. It is called +** as (*PostFuncP)(PostArg, CmdBlkP, txcontrol);. PostFuncP is not expected +** to return a value. PostFuncP does NOT need to free the command block, +** as this happens automatically after PostFuncP returns. +** +** Once the command block has been filled in, it is attached to the correct +** queue by calling RIOQueueCmdBlk( HostP, Rup, CmdBlkP ) where HostP is +** a pointer to the struct Host, Rup is the NUMBER of the rup (NOT a pointer +** to it!), and CmdBlkP is the pointer to the command block allocated using +** RIOGetCmdBlk(). +** +*/ diff --git a/drivers/staging/generic_serial/rio/rioctrl.c b/drivers/staging/generic_serial/rio/rioctrl.c new file mode 100644 index 000000000000..780506326a73 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rioctrl.c @@ -0,0 +1,1504 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rioctrl.c +** SID : 1.3 +** Last Modified : 11/6/98 10:33:42 +** Retrieved : 11/6/98 10:33:49 +** +** ident @(#)rioctrl.c 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + + +#include "linux_compat.h" +#include "rio_linux.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" +#include "rioioctl.h" + + +static struct LpbReq LpbReq; +static struct RupReq RupReq; +static struct PortReq PortReq; +static struct HostReq HostReq; /* oh really? global? and no locking? */ +static struct HostDpRam HostDpRam; +static struct DebugCtrl DebugCtrl; +static struct Map MapEnt; +static struct PortSetup PortSetup; +static struct DownLoad DownLoad; +static struct SendPack SendPack; +/* static struct StreamInfo StreamInfo; */ +/* static char modemtable[RIO_PORTS]; */ +static struct SpecialRupCmd SpecialRupCmd; +static struct PortParams PortParams; +static struct portStats portStats; + +static struct SubCmdStruct { + ushort Host; + ushort Rup; + ushort Port; + ushort Addr; +} SubCmd; + +struct PortTty { + uint port; + struct ttystatics Tty; +}; + +static struct PortTty PortTty; +typedef struct ttystatics TERMIO; + +/* +** This table is used when the config.rio downloads bin code to the +** driver. We index the table using the product code, 0-F, and call +** the function pointed to by the entry, passing the information +** about the boot. +** The RIOBootCodeUNKNOWN entry is there to politely tell the calling +** process to bog off. +*/ +static int + (*RIOBootTable[MAX_PRODUCT]) (struct rio_info *, struct DownLoad *) = { + /* 0 */ RIOBootCodeHOST, + /* Host Card */ + /* 1 */ RIOBootCodeRTA, + /* RTA */ +}; + +#define drv_makedev(maj, min) ((((uint) maj & 0xff) << 8) | ((uint) min & 0xff)) + +static int copy_from_io(void __user *to, void __iomem *from, size_t size) +{ + void *buf = kmalloc(size, GFP_KERNEL); + int res = -ENOMEM; + if (buf) { + rio_memcpy_fromio(buf, from, size); + res = copy_to_user(to, buf, size); + kfree(buf); + } + return res; +} + +int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su) +{ + uint Host; /* leave me unsigned! */ + uint port; /* and me! */ + struct Host *HostP; + ushort loop; + int Entry; + struct Port *PortP; + struct PKT __iomem *PacketP; + int retval = 0; + unsigned long flags; + void __user *argp = (void __user *)arg; + + func_enter(); + + /* Confuse the compiler to think that we've initialized these */ + Host = 0; + PortP = NULL; + + rio_dprintk(RIO_DEBUG_CTRL, "control ioctl cmd: 0x%x arg: %p\n", cmd, argp); + + switch (cmd) { + /* + ** RIO_SET_TIMER + ** + ** Change the value of the host card interrupt timer. + ** If the host card number is -1 then all host cards are changed + ** otherwise just the specified host card will be changed. + */ + case RIO_SET_TIMER: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_TIMER to %ldms\n", arg); + { + int host, value; + host = (arg >> 16) & 0x0000FFFF; + value = arg & 0x0000ffff; + if (host == -1) { + for (host = 0; host < p->RIONumHosts; host++) { + if (p->RIOHosts[host].Flags == RC_RUNNING) { + writew(value, &p->RIOHosts[host].ParmMapP->timer); + } + } + } else if (host >= p->RIONumHosts) { + return -EINVAL; + } else { + if (p->RIOHosts[host].Flags == RC_RUNNING) { + writew(value, &p->RIOHosts[host].ParmMapP->timer); + } + } + } + return 0; + + case RIO_FOAD_RTA: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_FOAD_RTA\n"); + return RIOCommandRta(p, arg, RIOFoadRta); + + case RIO_ZOMBIE_RTA: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_ZOMBIE_RTA\n"); + return RIOCommandRta(p, arg, RIOZombieRta); + + case RIO_IDENTIFY_RTA: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_IDENTIFY_RTA\n"); + return RIOIdentifyRta(p, argp); + + case RIO_KILL_NEIGHBOUR: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_KILL_NEIGHBOUR\n"); + return RIOKillNeighbour(p, argp); + + case SPECIAL_RUP_CMD: + { + struct CmdBlk *CmdBlkP; + + rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD\n"); + if (copy_from_user(&SpecialRupCmd, argp, sizeof(SpecialRupCmd))) { + rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD copy failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + CmdBlkP = RIOGetCmdBlk(); + if (!CmdBlkP) { + rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD GetCmdBlk failed\n"); + return -ENXIO; + } + CmdBlkP->Packet = SpecialRupCmd.Packet; + if (SpecialRupCmd.Host >= p->RIONumHosts) + SpecialRupCmd.Host = 0; + rio_dprintk(RIO_DEBUG_CTRL, "Queue special rup command for host %d rup %d\n", SpecialRupCmd.Host, SpecialRupCmd.RupNum); + if (RIOQueueCmdBlk(&p->RIOHosts[SpecialRupCmd.Host], SpecialRupCmd.RupNum, CmdBlkP) == RIO_FAIL) { + printk(KERN_WARNING "rio: FAILED TO QUEUE SPECIAL RUP COMMAND\n"); + } + return 0; + } + + case RIO_DEBUG_MEM: + return -EPERM; + + case RIO_ALL_MODEM: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_ALL_MODEM\n"); + p->RIOError.Error = IOCTL_COMMAND_UNKNOWN; + return -EINVAL; + + case RIO_GET_TABLE: + /* + ** Read the routing table from the device driver to user space + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_TABLE\n"); + + if ((retval = RIOApel(p)) != 0) + return retval; + + if (copy_to_user(argp, p->RIOConnectTable, TOTAL_MAP_ENTRIES * sizeof(struct Map))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_TABLE copy failed\n"); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + + { + int entry; + rio_dprintk(RIO_DEBUG_CTRL, "*****\nMAP ENTRIES\n"); + for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { + if ((p->RIOConnectTable[entry].ID == 0) && (p->RIOConnectTable[entry].HostUniqueNum == 0) && (p->RIOConnectTable[entry].RtaUniqueNum == 0)) + continue; + + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.HostUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].HostUniqueNum); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.RtaUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].RtaUniqueNum); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.ID = 0x%x\n", entry, p->RIOConnectTable[entry].ID); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.ID2 = 0x%x\n", entry, p->RIOConnectTable[entry].ID2); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Flags = 0x%x\n", entry, (int) p->RIOConnectTable[entry].Flags); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.SysPort = 0x%x\n", entry, (int) p->RIOConnectTable[entry].SysPort); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[0].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[0].Unit); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[0].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[0].Link); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[1].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[1].Unit); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[1].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[1].Link); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[2].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[2].Unit); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[2].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[2].Link); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[3].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[3].Unit); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[4].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[3].Link); + rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Name = %s\n", entry, p->RIOConnectTable[entry].Name); + } + rio_dprintk(RIO_DEBUG_CTRL, "*****\nEND MAP ENTRIES\n"); + } + p->RIOQuickCheck = NOT_CHANGED; /* a table has been gotten */ + return 0; + + case RIO_PUT_TABLE: + /* + ** Write the routing table to the device driver from user space + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE\n"); + + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE !Root\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + if (copy_from_user(&p->RIOConnectTable[0], argp, TOTAL_MAP_ENTRIES * sizeof(struct Map))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE copy failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } +/* +*********************************** + { + int entry; + rio_dprint(RIO_DEBUG_CTRL, ("*****\nMAP ENTRIES\n") ); + for ( entry=0; entryRIOConnectTable[entry].HostUniqueNum ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.RtaUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].RtaUniqueNum ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.ID = 0x%x\n", entry, p->RIOConnectTable[entry].ID ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.ID2 = 0x%x\n", entry, p->RIOConnectTable[entry].ID2 ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Flags = 0x%x\n", entry, p->RIOConnectTable[entry].Flags ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.SysPort = 0x%x\n", entry, p->RIOConnectTable[entry].SysPort ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[0].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[0].Unit ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[0].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[0].Link ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[1].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[1].Unit ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[1].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[1].Link ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[2].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[2].Unit ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[2].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[2].Link ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[3].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[3].Unit ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[4].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[3].Link ) ); + rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Name = %s\n", entry, p->RIOConnectTable[entry].Name ) ); + } + rio_dprint(RIO_DEBUG_CTRL, ("*****\nEND MAP ENTRIES\n") ); + } +*********************************** +*/ + return RIONewTable(p); + + case RIO_GET_BINDINGS: + /* + ** Send bindings table, containing unique numbers of RTAs owned + ** by this system to user space + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS\n"); + + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS !Root\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + if (copy_to_user(argp, p->RIOBindTab, (sizeof(ulong) * MAX_RTA_BINDINGS))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS copy failed\n"); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return 0; + + case RIO_PUT_BINDINGS: + /* + ** Receive a bindings table, containing unique numbers of RTAs owned + ** by this system + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS\n"); + + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS !Root\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + if (copy_from_user(&p->RIOBindTab[0], argp, (sizeof(ulong) * MAX_RTA_BINDINGS))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS copy failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + return 0; + + case RIO_BIND_RTA: + { + int EmptySlot = -1; + /* + ** Bind this RTA to host, so that it will be booted by + ** host in 'boot owned RTAs' mode. + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_BIND_RTA\n"); + + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_BIND_RTA !Root\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + for (Entry = 0; Entry < MAX_RTA_BINDINGS; Entry++) { + if ((EmptySlot == -1) && (p->RIOBindTab[Entry] == 0L)) + EmptySlot = Entry; + else if (p->RIOBindTab[Entry] == arg) { + /* + ** Already exists - delete + */ + p->RIOBindTab[Entry] = 0L; + rio_dprintk(RIO_DEBUG_CTRL, "Removing Rta %ld from p->RIOBindTab\n", arg); + return 0; + } + } + /* + ** Dosen't exist - add + */ + if (EmptySlot != -1) { + p->RIOBindTab[EmptySlot] = arg; + rio_dprintk(RIO_DEBUG_CTRL, "Adding Rta %lx to p->RIOBindTab\n", arg); + } else { + rio_dprintk(RIO_DEBUG_CTRL, "p->RIOBindTab full! - Rta %lx not added\n", arg); + return -ENOMEM; + } + return 0; + } + + case RIO_RESUME: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME\n"); + port = arg; + if ((port < 0) || (port > 511)) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Bad port number %d\n", port); + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + PortP = p->RIOPortp[port]; + if (!PortP->Mapped) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d not mapped\n", port); + p->RIOError.Error = PORT_NOT_MAPPED_INTO_SYSTEM; + return -EINVAL; + } + if (!(PortP->State & (RIO_LOPEN | RIO_MOPEN))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d not open\n", port); + return -EINVAL; + } + + rio_spin_lock_irqsave(&PortP->portSem, flags); + if (RIOPreemptiveCmd(p, (p->RIOPortp[port]), RIOC_RESUME) == + RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME failed\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return -EBUSY; + } else { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d resumed\n", port); + PortP->State |= RIO_BUSY; + } + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return retval; + + case RIO_ASSIGN_RTA: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_ASSIGN_RTA\n"); + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_ASSIGN_RTA !Root\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { + rio_dprintk(RIO_DEBUG_CTRL, "Copy from user space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + return RIOAssignRta(p, &MapEnt); + + case RIO_CHANGE_NAME: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_CHANGE_NAME\n"); + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_CHANGE_NAME !Root\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { + rio_dprintk(RIO_DEBUG_CTRL, "Copy from user space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + return RIOChangeName(p, &MapEnt); + + case RIO_DELETE_RTA: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_DELETE_RTA\n"); + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_DELETE_RTA !Root\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { + rio_dprintk(RIO_DEBUG_CTRL, "Copy from data space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + return RIODeleteRta(p, &MapEnt); + + case RIO_QUICK_CHECK: + if (copy_to_user(argp, &p->RIORtaDisCons, sizeof(unsigned int))) { + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return 0; + + case RIO_LAST_ERROR: + if (copy_to_user(argp, &p->RIOError, sizeof(struct Error))) + return -EFAULT; + return 0; + + case RIO_GET_LOG: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_LOG\n"); + return -EINVAL; + + case RIO_GET_MODTYPE: + if (copy_from_user(&port, argp, sizeof(unsigned int))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + rio_dprintk(RIO_DEBUG_CTRL, "Get module type for port %d\n", port); + if (port < 0 || port > 511) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_MODTYPE: Bad port number %d\n", port); + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + PortP = (p->RIOPortp[port]); + if (!PortP->Mapped) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_MODTYPE: Port %d not mapped\n", port); + p->RIOError.Error = PORT_NOT_MAPPED_INTO_SYSTEM; + return -EINVAL; + } + /* + ** Return module type of port + */ + port = PortP->HostP->UnixRups[PortP->RupNum].ModTypes; + if (copy_to_user(argp, &port, sizeof(unsigned int))) { + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return (0); + case RIO_BLOCK_OPENS: + rio_dprintk(RIO_DEBUG_CTRL, "Opens block until booted\n"); + for (Entry = 0; Entry < RIO_PORTS; Entry++) { + rio_spin_lock_irqsave(&PortP->portSem, flags); + p->RIOPortp[Entry]->WaitUntilBooted = 1; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + } + return 0; + + case RIO_SETUP_PORTS: + rio_dprintk(RIO_DEBUG_CTRL, "Setup ports\n"); + if (copy_from_user(&PortSetup, argp, sizeof(PortSetup))) { + p->RIOError.Error = COPYIN_FAILED; + rio_dprintk(RIO_DEBUG_CTRL, "EFAULT"); + return -EFAULT; + } + if (PortSetup.From > PortSetup.To || PortSetup.To >= RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + rio_dprintk(RIO_DEBUG_CTRL, "ENXIO"); + return -ENXIO; + } + if (PortSetup.XpCps > p->RIOConf.MaxXpCps || PortSetup.XpCps < p->RIOConf.MinXpCps) { + p->RIOError.Error = XPRINT_CPS_OUT_OF_RANGE; + rio_dprintk(RIO_DEBUG_CTRL, "EINVAL"); + return -EINVAL; + } + if (!p->RIOPortp) { + printk(KERN_ERR "rio: No p->RIOPortp array!\n"); + rio_dprintk(RIO_DEBUG_CTRL, "No p->RIOPortp array!\n"); + return -EIO; + } + rio_dprintk(RIO_DEBUG_CTRL, "entering loop (%d %d)!\n", PortSetup.From, PortSetup.To); + for (loop = PortSetup.From; loop <= PortSetup.To; loop++) { + rio_dprintk(RIO_DEBUG_CTRL, "in loop (%d)!\n", loop); + } + rio_dprintk(RIO_DEBUG_CTRL, "after loop (%d)!\n", loop); + rio_dprintk(RIO_DEBUG_CTRL, "Retval:%x\n", retval); + return retval; + + case RIO_GET_PORT_SETUP: + rio_dprintk(RIO_DEBUG_CTRL, "Get port setup\n"); + if (copy_from_user(&PortSetup, argp, sizeof(PortSetup))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (PortSetup.From >= RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + + port = PortSetup.To = PortSetup.From; + PortSetup.IxAny = (p->RIOPortp[port]->Config & RIO_IXANY) ? 1 : 0; + PortSetup.IxOn = (p->RIOPortp[port]->Config & RIO_IXON) ? 1 : 0; + PortSetup.Drain = (p->RIOPortp[port]->Config & RIO_WAITDRAIN) ? 1 : 0; + PortSetup.Store = p->RIOPortp[port]->Store; + PortSetup.Lock = p->RIOPortp[port]->Lock; + PortSetup.XpCps = p->RIOPortp[port]->Xprint.XpCps; + memcpy(PortSetup.XpOn, p->RIOPortp[port]->Xprint.XpOn, MAX_XP_CTRL_LEN); + memcpy(PortSetup.XpOff, p->RIOPortp[port]->Xprint.XpOff, MAX_XP_CTRL_LEN); + PortSetup.XpOn[MAX_XP_CTRL_LEN - 1] = '\0'; + PortSetup.XpOff[MAX_XP_CTRL_LEN - 1] = '\0'; + + if (copy_to_user(argp, &PortSetup, sizeof(PortSetup))) { + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return retval; + + case RIO_GET_PORT_PARAMS: + rio_dprintk(RIO_DEBUG_CTRL, "Get port params\n"); + if (copy_from_user(&PortParams, argp, sizeof(struct PortParams))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (PortParams.Port >= RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + PortP = (p->RIOPortp[PortParams.Port]); + PortParams.Config = PortP->Config; + PortParams.State = PortP->State; + rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortParams.Port); + + if (copy_to_user(argp, &PortParams, sizeof(struct PortParams))) { + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return retval; + + case RIO_GET_PORT_TTY: + rio_dprintk(RIO_DEBUG_CTRL, "Get port tty\n"); + if (copy_from_user(&PortTty, argp, sizeof(struct PortTty))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (PortTty.port >= RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + + rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortTty.port); + PortP = (p->RIOPortp[PortTty.port]); + if (copy_to_user(argp, &PortTty, sizeof(struct PortTty))) { + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return retval; + + case RIO_SET_PORT_TTY: + if (copy_from_user(&PortTty, argp, sizeof(struct PortTty))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + rio_dprintk(RIO_DEBUG_CTRL, "Set port %d tty\n", PortTty.port); + if (PortTty.port >= (ushort) RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + PortP = (p->RIOPortp[PortTty.port]); + RIOParam(PortP, RIOC_CONFIG, PortP->State & RIO_MODEM, + OK_TO_SLEEP); + return retval; + + case RIO_SET_PORT_PARAMS: + rio_dprintk(RIO_DEBUG_CTRL, "Set port params\n"); + if (copy_from_user(&PortParams, argp, sizeof(PortParams))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (PortParams.Port >= (ushort) RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + PortP = (p->RIOPortp[PortParams.Port]); + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->Config = PortParams.Config; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return retval; + + case RIO_GET_PORT_STATS: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_PORT_STATS\n"); + if (copy_from_user(&portStats, argp, sizeof(struct portStats))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (portStats.port < 0 || portStats.port >= RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + PortP = (p->RIOPortp[portStats.port]); + portStats.gather = PortP->statsGather; + portStats.txchars = PortP->txchars; + portStats.rxchars = PortP->rxchars; + portStats.opens = PortP->opens; + portStats.closes = PortP->closes; + portStats.ioctls = PortP->ioctls; + if (copy_to_user(argp, &portStats, sizeof(struct portStats))) { + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return retval; + + case RIO_RESET_PORT_STATS: + port = arg; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESET_PORT_STATS\n"); + if (port >= RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + PortP = (p->RIOPortp[port]); + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->txchars = 0; + PortP->rxchars = 0; + PortP->opens = 0; + PortP->closes = 0; + PortP->ioctls = 0; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return retval; + + case RIO_GATHER_PORT_STATS: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GATHER_PORT_STATS\n"); + if (copy_from_user(&portStats, argp, sizeof(struct portStats))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (portStats.port < 0 || portStats.port >= RIO_PORTS) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + PortP = (p->RIOPortp[portStats.port]); + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->statsGather = portStats.gather; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return retval; + + case RIO_READ_CONFIG: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_CONFIG\n"); + if (copy_to_user(argp, &p->RIOConf, sizeof(struct Conf))) { + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return retval; + + case RIO_SET_CONFIG: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_CONFIG\n"); + if (!su) { + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + if (copy_from_user(&p->RIOConf, argp, sizeof(struct Conf))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + /* + ** move a few value around + */ + for (Host = 0; Host < p->RIONumHosts; Host++) + if ((p->RIOHosts[Host].Flags & RUN_STATE) == RC_RUNNING) + writew(p->RIOConf.Timer, &p->RIOHosts[Host].ParmMapP->timer); + return retval; + + case RIO_START_POLLER: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_START_POLLER\n"); + return -EINVAL; + + case RIO_STOP_POLLER: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_STOP_POLLER\n"); + if (!su) { + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + p->RIOPolling = NOT_POLLING; + return retval; + + case RIO_SETDEBUG: + case RIO_GETDEBUG: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SETDEBUG/RIO_GETDEBUG\n"); + if (copy_from_user(&DebugCtrl, argp, sizeof(DebugCtrl))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (DebugCtrl.SysPort == NO_PORT) { + if (cmd == RIO_SETDEBUG) { + if (!su) { + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + p->rio_debug = DebugCtrl.Debug; + p->RIODebugWait = DebugCtrl.Wait; + rio_dprintk(RIO_DEBUG_CTRL, "Set global debug to 0x%x set wait to 0x%x\n", p->rio_debug, p->RIODebugWait); + } else { + rio_dprintk(RIO_DEBUG_CTRL, "Get global debug 0x%x wait 0x%x\n", p->rio_debug, p->RIODebugWait); + DebugCtrl.Debug = p->rio_debug; + DebugCtrl.Wait = p->RIODebugWait; + if (copy_to_user(argp, &DebugCtrl, sizeof(DebugCtrl))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET/GET DEBUG: bad port number %d\n", DebugCtrl.SysPort); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + } + } else if (DebugCtrl.SysPort >= RIO_PORTS && DebugCtrl.SysPort != NO_PORT) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET/GET DEBUG: bad port number %d\n", DebugCtrl.SysPort); + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } else if (cmd == RIO_SETDEBUG) { + if (!su) { + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + p->RIOPortp[DebugCtrl.SysPort]->Debug = DebugCtrl.Debug; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SETDEBUG 0x%x\n", p->RIOPortp[DebugCtrl.SysPort]->Debug); + } else { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GETDEBUG 0x%x\n", p->RIOPortp[DebugCtrl.SysPort]->Debug); + DebugCtrl.Debug = p->RIOPortp[DebugCtrl.SysPort]->Debug; + if (copy_to_user(argp, &DebugCtrl, sizeof(DebugCtrl))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_GETDEBUG: Bad copy to user space\n"); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + } + return retval; + + case RIO_VERSID: + /* + ** Enquire about the release and version. + ** We return MAX_VERSION_LEN bytes, being a + ** textual null terminated string. + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_VERSID\n"); + if (copy_to_user(argp, RIOVersid(), sizeof(struct rioVersion))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_VERSID: Bad copy to user space (host=%d)\n", Host); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return retval; + + case RIO_NUM_HOSTS: + /* + ** Enquire as to the number of hosts located + ** at init time. + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_NUM_HOSTS\n"); + if (copy_to_user(argp, &p->RIONumHosts, sizeof(p->RIONumHosts))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_NUM_HOSTS: Bad copy to user space\n"); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return retval; + + case RIO_HOST_FOAD: + /* + ** Kill host. This may not be in the final version... + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_FOAD %ld\n", arg); + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_FOAD: Not super user\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + p->RIOHalted = 1; + p->RIOSystemUp = 0; + + for (Host = 0; Host < p->RIONumHosts; Host++) { + (void) RIOBoardTest(p->RIOHosts[Host].PaddrP, p->RIOHosts[Host].Caddr, p->RIOHosts[Host].Type, p->RIOHosts[Host].Slot); + memset(&p->RIOHosts[Host].Flags, 0, ((char *) &p->RIOHosts[Host].____end_marker____) - ((char *) &p->RIOHosts[Host].Flags)); + p->RIOHosts[Host].Flags = RC_WAITING; + } + RIOFoadWakeup(p); + p->RIONumBootPkts = 0; + p->RIOBooting = 0; + printk("HEEEEELP!\n"); + + for (loop = 0; loop < RIO_PORTS; loop++) { + spin_lock_init(&p->RIOPortp[loop]->portSem); + p->RIOPortp[loop]->InUse = NOT_INUSE; + } + + p->RIOSystemUp = 0; + return retval; + + case RIO_DOWNLOAD: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD\n"); + if (!su) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Not super user\n"); + p->RIOError.Error = NOT_SUPER_USER; + return -EPERM; + } + if (copy_from_user(&DownLoad, argp, sizeof(DownLoad))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Copy in from user space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + rio_dprintk(RIO_DEBUG_CTRL, "Copied in download code for product code 0x%x\n", DownLoad.ProductCode); + + /* + ** It is important that the product code is an unsigned object! + */ + if (DownLoad.ProductCode >= MAX_PRODUCT) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Bad product code %d passed\n", DownLoad.ProductCode); + p->RIOError.Error = NO_SUCH_PRODUCT; + return -ENXIO; + } + /* + ** do something! + */ + retval = (*(RIOBootTable[DownLoad.ProductCode])) (p, &DownLoad); + /* <-- Panic */ + p->RIOHalted = 0; + /* + ** and go back, content with a job well completed. + */ + return retval; + + case RIO_PARMS: + { + unsigned int host; + + if (copy_from_user(&host, argp, sizeof(host))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Copy in from user space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + /* + ** Fetch the parmmap + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_PARMS\n"); + if (copy_from_io(argp, p->RIOHosts[host].ParmMapP, sizeof(PARM_MAP))) { + p->RIOError.Error = COPYOUT_FAILED; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_PARMS: Copy out to user space failed\n"); + return -EFAULT; + } + } + return retval; + + case RIO_HOST_REQ: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ\n"); + if (copy_from_user(&HostReq, argp, sizeof(HostReq))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Copy in from user space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (HostReq.HostNum >= p->RIONumHosts) { + p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Illegal host number %d\n", HostReq.HostNum); + return -ENXIO; + } + rio_dprintk(RIO_DEBUG_CTRL, "Request for host %d\n", HostReq.HostNum); + + if (copy_to_user(HostReq.HostP, &p->RIOHosts[HostReq.HostNum], sizeof(struct Host))) { + p->RIOError.Error = COPYOUT_FAILED; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Bad copy to user space\n"); + return -EFAULT; + } + return retval; + + case RIO_HOST_DPRAM: + rio_dprintk(RIO_DEBUG_CTRL, "Request for DPRAM\n"); + if (copy_from_user(&HostDpRam, argp, sizeof(HostDpRam))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Copy in from user space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (HostDpRam.HostNum >= p->RIONumHosts) { + p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Illegal host number %d\n", HostDpRam.HostNum); + return -ENXIO; + } + rio_dprintk(RIO_DEBUG_CTRL, "Request for host %d\n", HostDpRam.HostNum); + + if (p->RIOHosts[HostDpRam.HostNum].Type == RIO_PCI) { + int off; + /* It's hardware like this that really gets on my tits. */ + static unsigned char copy[sizeof(struct DpRam)]; + for (off = 0; off < sizeof(struct DpRam); off++) + copy[off] = readb(p->RIOHosts[HostDpRam.HostNum].Caddr + off); + if (copy_to_user(HostDpRam.DpRamP, copy, sizeof(struct DpRam))) { + p->RIOError.Error = COPYOUT_FAILED; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Bad copy to user space\n"); + return -EFAULT; + } + } else if (copy_from_io(HostDpRam.DpRamP, p->RIOHosts[HostDpRam.HostNum].Caddr, sizeof(struct DpRam))) { + p->RIOError.Error = COPYOUT_FAILED; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Bad copy to user space\n"); + return -EFAULT; + } + return retval; + + case RIO_SET_BUSY: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_BUSY\n"); + if (arg > 511) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_BUSY: Bad port number %ld\n", arg); + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + p->RIOPortp[arg]->State |= RIO_BUSY; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return retval; + + case RIO_HOST_PORT: + /* + ** The daemon want port information + ** (probably for debug reasons) + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT\n"); + if (copy_from_user(&PortReq, argp, sizeof(PortReq))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Copy in from user space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + + if (PortReq.SysPort >= RIO_PORTS) { /* SysPort is unsigned */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Illegal port number %d\n", PortReq.SysPort); + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + rio_dprintk(RIO_DEBUG_CTRL, "Request for port %d\n", PortReq.SysPort); + if (copy_to_user(PortReq.PortP, p->RIOPortp[PortReq.SysPort], sizeof(struct Port))) { + p->RIOError.Error = COPYOUT_FAILED; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Bad copy to user space\n"); + return -EFAULT; + } + return retval; + + case RIO_HOST_RUP: + /* + ** The daemon want rup information + ** (probably for debug reasons) + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP\n"); + if (copy_from_user(&RupReq, argp, sizeof(RupReq))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Copy in from user space failed\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (RupReq.HostNum >= p->RIONumHosts) { /* host is unsigned */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Illegal host number %d\n", RupReq.HostNum); + p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + if (RupReq.RupNum >= MAX_RUP + LINKS_PER_UNIT) { /* eek! */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Illegal rup number %d\n", RupReq.RupNum); + p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + HostP = &p->RIOHosts[RupReq.HostNum]; + + if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Host %d not running\n", RupReq.HostNum); + p->RIOError.Error = HOST_NOT_RUNNING; + return -EIO; + } + rio_dprintk(RIO_DEBUG_CTRL, "Request for rup %d from host %d\n", RupReq.RupNum, RupReq.HostNum); + + if (copy_from_io(RupReq.RupP, HostP->UnixRups[RupReq.RupNum].RupP, sizeof(struct RUP))) { + p->RIOError.Error = COPYOUT_FAILED; + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Bad copy to user space\n"); + return -EFAULT; + } + return retval; + + case RIO_HOST_LPB: + /* + ** The daemon want lpb information + ** (probably for debug reasons) + */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB\n"); + if (copy_from_user(&LpbReq, argp, sizeof(LpbReq))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Bad copy from user space\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (LpbReq.Host >= p->RIONumHosts) { /* host is unsigned */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Illegal host number %d\n", LpbReq.Host); + p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + if (LpbReq.Link >= LINKS_PER_UNIT) { /* eek! */ + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Illegal link number %d\n", LpbReq.Link); + p->RIOError.Error = LINK_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + HostP = &p->RIOHosts[LpbReq.Host]; + + if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Host %d not running\n", LpbReq.Host); + p->RIOError.Error = HOST_NOT_RUNNING; + return -EIO; + } + rio_dprintk(RIO_DEBUG_CTRL, "Request for lpb %d from host %d\n", LpbReq.Link, LpbReq.Host); + + if (copy_from_io(LpbReq.LpbP, &HostP->LinkStrP[LpbReq.Link], sizeof(struct LPB))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Bad copy to user space\n"); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return retval; + + /* + ** Here 3 IOCTL's that allow us to change the way in which + ** rio logs errors. send them just to syslog or send them + ** to both syslog and console or send them to just the console. + ** + ** See RioStrBuf() in util.c for the other half. + */ + case RIO_SYSLOG_ONLY: + p->RIOPrintLogState = PRINT_TO_LOG; /* Just syslog */ + return 0; + + case RIO_SYSLOG_CONS: + p->RIOPrintLogState = PRINT_TO_LOG_CONS; /* syslog and console */ + return 0; + + case RIO_CONS_ONLY: + p->RIOPrintLogState = PRINT_TO_CONS; /* Just console */ + return 0; + + case RIO_SIGNALS_ON: + if (p->RIOSignalProcess) { + p->RIOError.Error = SIGNALS_ALREADY_SET; + return -EBUSY; + } + /* FIXME: PID tracking */ + p->RIOSignalProcess = current->pid; + p->RIOPrintDisabled = DONT_PRINT; + return retval; + + case RIO_SIGNALS_OFF: + if (p->RIOSignalProcess != current->pid) { + p->RIOError.Error = NOT_RECEIVING_PROCESS; + return -EPERM; + } + rio_dprintk(RIO_DEBUG_CTRL, "Clear signal process to zero\n"); + p->RIOSignalProcess = 0; + return retval; + + case RIO_SET_BYTE_MODE: + for (Host = 0; Host < p->RIONumHosts; Host++) + if (p->RIOHosts[Host].Type == RIO_AT) + p->RIOHosts[Host].Mode &= ~WORD_OPERATION; + return retval; + + case RIO_SET_WORD_MODE: + for (Host = 0; Host < p->RIONumHosts; Host++) + if (p->RIOHosts[Host].Type == RIO_AT) + p->RIOHosts[Host].Mode |= WORD_OPERATION; + return retval; + + case RIO_SET_FAST_BUS: + for (Host = 0; Host < p->RIONumHosts; Host++) + if (p->RIOHosts[Host].Type == RIO_AT) + p->RIOHosts[Host].Mode |= FAST_AT_BUS; + return retval; + + case RIO_SET_SLOW_BUS: + for (Host = 0; Host < p->RIONumHosts; Host++) + if (p->RIOHosts[Host].Type == RIO_AT) + p->RIOHosts[Host].Mode &= ~FAST_AT_BUS; + return retval; + + case RIO_MAP_B50_TO_50: + case RIO_MAP_B50_TO_57600: + case RIO_MAP_B110_TO_110: + case RIO_MAP_B110_TO_115200: + rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping\n"); + port = arg; + if (port < 0 || port > 511) { + rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping: Bad port number %d\n", port); + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + switch (cmd) { + case RIO_MAP_B50_TO_50: + p->RIOPortp[port]->Config |= RIO_MAP_50_TO_50; + break; + case RIO_MAP_B50_TO_57600: + p->RIOPortp[port]->Config &= ~RIO_MAP_50_TO_50; + break; + case RIO_MAP_B110_TO_110: + p->RIOPortp[port]->Config |= RIO_MAP_110_TO_110; + break; + case RIO_MAP_B110_TO_115200: + p->RIOPortp[port]->Config &= ~RIO_MAP_110_TO_110; + break; + } + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return retval; + + case RIO_STREAM_INFO: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_STREAM_INFO\n"); + return -EINVAL; + + case RIO_SEND_PACKET: + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SEND_PACKET\n"); + if (copy_from_user(&SendPack, argp, sizeof(SendPack))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_SEND_PACKET: Bad copy from user space\n"); + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + if (SendPack.PortNum >= 128) { + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -ENXIO; + } + + PortP = p->RIOPortp[SendPack.PortNum]; + rio_spin_lock_irqsave(&PortP->portSem, flags); + + if (!can_add_transmit(&PacketP, PortP)) { + p->RIOError.Error = UNIT_IS_IN_USE; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return -ENOSPC; + } + + for (loop = 0; loop < (ushort) (SendPack.Len & 127); loop++) + writeb(SendPack.Data[loop], &PacketP->data[loop]); + + writeb(SendPack.Len, &PacketP->len); + + add_transmit(PortP); + /* + ** Count characters transmitted for port statistics reporting + */ + if (PortP->statsGather) + PortP->txchars += (SendPack.Len & 127); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return retval; + + case RIO_NO_MESG: + if (su) + p->RIONoMessage = 1; + return su ? 0 : -EPERM; + + case RIO_MESG: + if (su) + p->RIONoMessage = 0; + return su ? 0 : -EPERM; + + case RIO_WHAT_MESG: + if (copy_to_user(argp, &p->RIONoMessage, sizeof(p->RIONoMessage))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_WHAT_MESG: Bad copy to user space\n"); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return 0; + + case RIO_MEM_DUMP: + if (copy_from_user(&SubCmd, argp, sizeof(struct SubCmdStruct))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP host %d rup %d addr %x\n", SubCmd.Host, SubCmd.Rup, SubCmd.Addr); + + if (SubCmd.Rup >= MAX_RUP + LINKS_PER_UNIT) { + p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + + if (SubCmd.Host >= p->RIONumHosts) { + p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + + port = p->RIOHosts[SubCmd.Host].UnixRups[SubCmd.Rup].BaseSysPort; + + PortP = p->RIOPortp[port]; + + rio_spin_lock_irqsave(&PortP->portSem, flags); + + if (RIOPreemptiveCmd(p, PortP, RIOC_MEMDUMP) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP failed\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return -EBUSY; + } else + PortP->State |= RIO_BUSY; + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (copy_to_user(argp, p->RIOMemDump, MEMDUMP_SIZE)) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP copy failed\n"); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return 0; + + case RIO_TICK: + if (arg >= p->RIONumHosts) + return -EINVAL; + rio_dprintk(RIO_DEBUG_CTRL, "Set interrupt for host %ld\n", arg); + writeb(0xFF, &p->RIOHosts[arg].SetInt); + return 0; + + case RIO_TOCK: + if (arg >= p->RIONumHosts) + return -EINVAL; + rio_dprintk(RIO_DEBUG_CTRL, "Clear interrupt for host %ld\n", arg); + writeb(0xFF, &p->RIOHosts[arg].ResetInt); + return 0; + + case RIO_READ_CHECK: + /* Check reads for pkts with data[0] the same */ + p->RIOReadCheck = !p->RIOReadCheck; + if (copy_to_user(argp, &p->RIOReadCheck, sizeof(unsigned int))) { + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return 0; + + case RIO_READ_REGISTER: + if (copy_from_user(&SubCmd, argp, sizeof(struct SubCmdStruct))) { + p->RIOError.Error = COPYIN_FAILED; + return -EFAULT; + } + rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER host %d rup %d port %d reg %x\n", SubCmd.Host, SubCmd.Rup, SubCmd.Port, SubCmd.Addr); + + if (SubCmd.Port > 511) { + rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping: Bad port number %d\n", SubCmd.Port); + p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + + if (SubCmd.Rup >= MAX_RUP + LINKS_PER_UNIT) { + p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + + if (SubCmd.Host >= p->RIONumHosts) { + p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + + port = p->RIOHosts[SubCmd.Host].UnixRups[SubCmd.Rup].BaseSysPort + SubCmd.Port; + PortP = p->RIOPortp[port]; + + rio_spin_lock_irqsave(&PortP->portSem, flags); + + if (RIOPreemptiveCmd(p, PortP, RIOC_READ_REGISTER) == + RIO_FAIL) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER failed\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return -EBUSY; + } else + PortP->State |= RIO_BUSY; + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (copy_to_user(argp, &p->CdRegister, sizeof(unsigned int))) { + rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER copy failed\n"); + p->RIOError.Error = COPYOUT_FAILED; + return -EFAULT; + } + return 0; + /* + ** rio_make_dev: given port number (0-511) ORed with port type + ** (RIO_DEV_DIRECT, RIO_DEV_MODEM, RIO_DEV_XPRINT) return dev_t + ** value to pass to mknod to create the correct device node. + */ + case RIO_MAKE_DEV: + { + unsigned int port = arg & RIO_MODEM_MASK; + unsigned int ret; + + switch (arg & RIO_DEV_MASK) { + case RIO_DEV_DIRECT: + ret = drv_makedev(MAJOR(dev), port); + rio_dprintk(RIO_DEBUG_CTRL, "Makedev direct 0x%x is 0x%x\n", port, ret); + return ret; + case RIO_DEV_MODEM: + ret = drv_makedev(MAJOR(dev), (port | RIO_MODEM_BIT)); + rio_dprintk(RIO_DEBUG_CTRL, "Makedev modem 0x%x is 0x%x\n", port, ret); + return ret; + case RIO_DEV_XPRINT: + ret = drv_makedev(MAJOR(dev), port); + rio_dprintk(RIO_DEBUG_CTRL, "Makedev printer 0x%x is 0x%x\n", port, ret); + return ret; + } + rio_dprintk(RIO_DEBUG_CTRL, "MAKE Device is called\n"); + return -EINVAL; + } + /* + ** rio_minor: given a dev_t from a stat() call, return + ** the port number (0-511) ORed with the port type + ** ( RIO_DEV_DIRECT, RIO_DEV_MODEM, RIO_DEV_XPRINT ) + */ + case RIO_MINOR: + { + dev_t dv; + int mino; + unsigned long ret; + + dv = (dev_t) (arg); + mino = RIO_UNMODEM(dv); + + if (RIO_ISMODEM(dv)) { + rio_dprintk(RIO_DEBUG_CTRL, "Minor for device 0x%x: modem %d\n", dv, mino); + ret = mino | RIO_DEV_MODEM; + } else { + rio_dprintk(RIO_DEBUG_CTRL, "Minor for device 0x%x: direct %d\n", dv, mino); + ret = mino | RIO_DEV_DIRECT; + } + return ret; + } + } + rio_dprintk(RIO_DEBUG_CTRL, "INVALID DAEMON IOCTL 0x%x\n", cmd); + p->RIOError.Error = IOCTL_COMMAND_UNKNOWN; + + func_exit(); + return -EINVAL; +} + +/* +** Pre-emptive commands go on RUPs and are only one byte long. +*/ +int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd) +{ + struct CmdBlk *CmdBlkP; + struct PktCmd_M *PktCmdP; + int Ret; + ushort rup; + int port; + + if (PortP->State & RIO_DELETED) { + rio_dprintk(RIO_DEBUG_CTRL, "Preemptive command to deleted RTA ignored\n"); + return RIO_FAIL; + } + + if ((PortP->InUse == (typeof(PortP->InUse))-1) || + !(CmdBlkP = RIOGetCmdBlk())) { + rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block " + "for command %d on port %d\n", Cmd, PortP->PortNum); + return RIO_FAIL; + } + + rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", + CmdBlkP, PortP->InUse); + + PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0]; + + CmdBlkP->Packet.src_unit = 0; + if (PortP->SecondBlock) + rup = PortP->ID2; + else + rup = PortP->RupNum; + CmdBlkP->Packet.dest_unit = rup; + CmdBlkP->Packet.src_port = COMMAND_RUP; + CmdBlkP->Packet.dest_port = COMMAND_RUP; + CmdBlkP->Packet.len = PKT_CMD_BIT | 2; + CmdBlkP->PostFuncP = RIOUnUse; + CmdBlkP->PostArg = (unsigned long) PortP; + PktCmdP->Command = Cmd; + port = PortP->HostPort % (ushort) PORTS_PER_RTA; + /* + ** Index ports 8-15 for 2nd block of 16 port RTA. + */ + if (PortP->SecondBlock) + port += (ushort) PORTS_PER_RTA; + PktCmdP->PhbNum = port; + + switch (Cmd) { + case RIOC_MEMDUMP: + rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p " + "(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr); + PktCmdP->SubCommand = RIOC_MEMDUMP; + PktCmdP->SubAddr = SubCmd.Addr; + break; + case RIOC_FCLOSE: + rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", + CmdBlkP); + break; + case RIOC_READ_REGISTER: + rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) " + "command blk %p\n", (int) SubCmd.Addr, CmdBlkP); + PktCmdP->SubCommand = RIOC_READ_REGISTER; + PktCmdP->SubAddr = SubCmd.Addr; + break; + case RIOC_RESUME: + rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", + CmdBlkP); + break; + case RIOC_RFLUSH: + rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", + CmdBlkP); + CmdBlkP->PostFuncP = RIORFlushEnable; + break; + case RIOC_SUSPEND: + rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", + CmdBlkP); + break; + + case RIOC_MGET: + rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", + CmdBlkP); + break; + + case RIOC_MSET: + case RIOC_MBIC: + case RIOC_MBIS: + CmdBlkP->Packet.data[4] = (char) PortP->ModemLines; + rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command " + "blk %p\n", CmdBlkP); + break; + + case RIOC_WFLUSH: + /* + ** If we have queued up the maximum number of Write flushes + ** allowed then we should not bother sending any more to the + ** RTA. + */ + if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) { + rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, " + "WflushFlag about to wrap!"); + RIOFreeCmdBlk(CmdBlkP); + return (RIO_FAIL); + } else { + rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command " + "blk %p\n", CmdBlkP); + CmdBlkP->PostFuncP = RIOWFlushMark; + } + break; + } + + PortP->InUse++; + + Ret = RIOQueueCmdBlk(PortP->HostP, rup, CmdBlkP); + + return Ret; +} diff --git a/drivers/staging/generic_serial/rio/riodrvr.h b/drivers/staging/generic_serial/rio/riodrvr.h new file mode 100644 index 000000000000..0907e711b355 --- /dev/null +++ b/drivers/staging/generic_serial/rio/riodrvr.h @@ -0,0 +1,138 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : riodrvr.h +** SID : 1.3 +** Last Modified : 11/6/98 09:22:46 +** Retrieved : 11/6/98 09:22:46 +** +** ident @(#)riodrvr.h 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __riodrvr_h +#define __riodrvr_h + +#include /* for HZ */ + +#define MEMDUMP_SIZE 32 +#define MOD_DISABLE (RIO_NOREAD|RIO_NOWRITE|RIO_NOXPRINT) + + +struct rio_info { + int mode; /* Intr or polled, word/byte */ + spinlock_t RIOIntrSem; /* Interrupt thread sem */ + int current_chan; /* current channel */ + int RIOFailed; /* Not initialised ? */ + int RIOInstallAttempts; /* no. of rio-install() calls */ + int RIOLastPCISearch; /* status of last search */ + int RIONumHosts; /* Number of RIO Hosts */ + struct Host *RIOHosts; /* RIO Host values */ + struct Port **RIOPortp; /* RIO port values */ +/* +** 02.03.1999 ARG - ESIL 0820 fix +** We no longer use RIOBootMode +** + int RIOBootMode; * RIO boot mode * +** +*/ + int RIOPrintDisabled; /* RIO printing disabled ? */ + int RIOPrintLogState; /* RIO printing state ? */ + int RIOPolling; /* Polling ? */ +/* +** 09.12.1998 ARG - ESIL 0776 part fix +** The 'RIO_QUICK_CHECK' ioctl was using RIOHalted. +** The fix for this ESIL introduces another member (RIORtaDisCons) here to be +** updated in RIOConCon() - to keep track of RTA connections/disconnections. +** 'RIO_QUICK_CHECK' now returns the value of RIORtaDisCons. +*/ + int RIOHalted; /* halted ? */ + int RIORtaDisCons; /* RTA connections/disconnections */ + unsigned int RIOReadCheck; /* Rio read check */ + unsigned int RIONoMessage; /* To display message or not */ + unsigned int RIONumBootPkts; /* how many packets for an RTA */ + unsigned int RIOBootCount; /* size of RTA code */ + unsigned int RIOBooting; /* count of outstanding boots */ + unsigned int RIOSystemUp; /* Booted ?? */ + unsigned int RIOCounting; /* for counting interrupts */ + unsigned int RIOIntCount; /* # of intr since last check */ + unsigned int RIOTxCount; /* number of xmit intrs */ + unsigned int RIORxCount; /* number of rx intrs */ + unsigned int RIORupCount; /* number of rup intrs */ + int RIXTimer; + int RIOBufferSize; /* Buffersize */ + int RIOBufferMask; /* Buffersize */ + + int RIOFirstMajor; /* First host card's major no */ + + unsigned int RIOLastPortsMapped; /* highest port number known */ + unsigned int RIOFirstPortsMapped; /* lowest port number known */ + + unsigned int RIOLastPortsBooted; /* highest port number running */ + unsigned int RIOFirstPortsBooted; /* lowest port number running */ + + unsigned int RIOLastPortsOpened; /* highest port number running */ + unsigned int RIOFirstPortsOpened; /* lowest port number running */ + + /* Flag to say that the topology information has been changed. */ + unsigned int RIOQuickCheck; + unsigned int CdRegister; /* ??? */ + int RIOSignalProcess; /* Signalling process */ + int rio_debug; /* To debug ... */ + int RIODebugWait; /* For what ??? */ + int tpri; /* Thread prio */ + int tid; /* Thread id */ + unsigned int _RIO_Polled; /* Counter for polling */ + unsigned int _RIO_Interrupted; /* Counter for interrupt */ + int intr_tid; /* iointset return value */ + int TxEnSem; /* TxEnable Semaphore */ + + + struct Error RIOError; /* to Identify what went wrong */ + struct Conf RIOConf; /* Configuration ??? */ + struct ttystatics channel[RIO_PORTS]; /* channel information */ + char RIOBootPackets[1 + (SIXTY_FOUR_K / RTA_BOOT_DATA_SIZE)] + [RTA_BOOT_DATA_SIZE]; + struct Map RIOConnectTable[TOTAL_MAP_ENTRIES]; + struct Map RIOSavedTable[TOTAL_MAP_ENTRIES]; + + /* RTA to host binding table for master/slave operation */ + unsigned long RIOBindTab[MAX_RTA_BINDINGS]; + /* RTA memory dump variable */ + unsigned char RIOMemDump[MEMDUMP_SIZE]; + struct ModuleInfo RIOModuleTypes[MAX_MODULE_TYPES]; + +}; + + +#ifdef linux +#define debug(x) printk x +#else +#define debug(x) kkprintf x +#endif + + + +#define RIO_RESET_INT 0x7d80 + +#endif /* __riodrvr.h */ diff --git a/drivers/staging/generic_serial/rio/rioinfo.h b/drivers/staging/generic_serial/rio/rioinfo.h new file mode 100644 index 000000000000..42ff1e79d96f --- /dev/null +++ b/drivers/staging/generic_serial/rio/rioinfo.h @@ -0,0 +1,92 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rioinfo.h +** SID : 1.2 +** Last Modified : 11/6/98 14:07:49 +** Retrieved : 11/6/98 14:07:50 +** +** ident @(#)rioinfo.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rioinfo_h +#define __rioinfo_h + +/* +** Host card data structure +*/ +struct RioHostInfo { + long location; /* RIO Card Base I/O address */ + long vector; /* RIO Card IRQ vector */ + int bus; /* ISA/EISA/MCA/PCI */ + int mode; /* pointer to host mode - INTERRUPT / POLLED */ + struct old_sgttyb + *Sg; /* pointer to default term characteristics */ +}; + + +/* Mode in rio device info */ +#define INTERRUPTED_MODE 0x01 /* Interrupt is generated */ +#define POLLED_MODE 0x02 /* No interrupt */ +#define AUTO_MODE 0x03 /* Auto mode */ + +#define WORD_ACCESS_MODE 0x10 /* Word Access Mode */ +#define BYTE_ACCESS_MODE 0x20 /* Byte Access Mode */ + + +/* Bus type that RIO supports */ +#define ISA_BUS 0x01 /* The card is ISA */ +#define EISA_BUS 0x02 /* The card is EISA */ +#define MCA_BUS 0x04 /* The card is MCA */ +#define PCI_BUS 0x08 /* The card is PCI */ + +/* +** 11.11.1998 ARG - ESIL ???? part fix +** Moved definition for 'CHAN' here from rioinfo.c (it is now +** called 'DEF_TERM_CHARACTERISTICS'). +*/ + +#define DEF_TERM_CHARACTERISTICS \ +{ \ + B19200, B19200, /* input and output speed */ \ + 'H' - '@', /* erase char */ \ + -1, /* 2nd erase char */ \ + 'U' - '@', /* kill char */ \ + ECHO | CRMOD, /* mode */ \ + 'C' - '@', /* interrupt character */ \ + '\\' - '@', /* quit char */ \ + 'Q' - '@', /* start char */ \ + 'S' - '@', /* stop char */ \ + 'D' - '@', /* EOF */ \ + -1, /* brk */ \ + (LCRTBS | LCRTERA | LCRTKIL | LCTLECH), /* local mode word */ \ + 'Z' - '@', /* process stop */ \ + 'Y' - '@', /* delayed stop */ \ + 'R' - '@', /* reprint line */ \ + 'O' - '@', /* flush output */ \ + 'W' - '@', /* word erase */ \ + 'V' - '@' /* literal next char */ \ +} + +#endif /* __rioinfo_h */ diff --git a/drivers/staging/generic_serial/rio/rioinit.c b/drivers/staging/generic_serial/rio/rioinit.c new file mode 100644 index 000000000000..24a282bb89d4 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rioinit.c @@ -0,0 +1,421 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rioinit.c +** SID : 1.3 +** Last Modified : 11/6/98 10:33:43 +** Retrieved : 11/6/98 10:33:49 +** +** ident @(#)rioinit.c 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + + +#include "linux_compat.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" +#include "rioioctl.h" +#include "rio_linux.h" + +int RIOPCIinit(struct rio_info *p, int Mode); + +static int RIOScrub(int, u8 __iomem *, int); + + +/** +** RIOAssignAT : +** +** Fill out the fields in the p->RIOHosts structure now we know we know +** we have a board present. +** +** bits < 0 indicates 8 bit operation requested, +** bits > 0 indicates 16 bit operation. +*/ + +int RIOAssignAT(struct rio_info *p, int Base, void __iomem *virtAddr, int mode) +{ + int bits; + struct DpRam __iomem *cardp = (struct DpRam __iomem *)virtAddr; + + if ((Base < ONE_MEG) || (mode & BYTE_ACCESS_MODE)) + bits = BYTE_OPERATION; + else + bits = WORD_OPERATION; + + /* + ** Board has passed its scrub test. Fill in all the + ** transient stuff. + */ + p->RIOHosts[p->RIONumHosts].Caddr = virtAddr; + p->RIOHosts[p->RIONumHosts].CardP = virtAddr; + + /* + ** Revision 01 AT host cards don't support WORD operations, + */ + if (readb(&cardp->DpRevision) == 01) + bits = BYTE_OPERATION; + + p->RIOHosts[p->RIONumHosts].Type = RIO_AT; + p->RIOHosts[p->RIONumHosts].Copy = rio_copy_to_card; + /* set this later */ + p->RIOHosts[p->RIONumHosts].Slot = -1; + p->RIOHosts[p->RIONumHosts].Mode = SLOW_LINKS | SLOW_AT_BUS | bits; + writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE , + &p->RIOHosts[p->RIONumHosts].Control); + writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); + writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE, + &p->RIOHosts[p->RIONumHosts].Control); + writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); + p->RIOHosts[p->RIONumHosts].UniqueNum = + ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)| + ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)| + ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)| + ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Uniquenum 0x%x\n",p->RIOHosts[p->RIONumHosts].UniqueNum); + + p->RIONumHosts++; + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base); + return(1); +} + +static u8 val[] = { +#ifdef VERY_LONG_TEST + 0x00, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, + 0xa5, 0xff, 0x5a, 0x00, 0xff, 0xc9, 0x36, +#endif + 0xff, 0x00, 0x00 }; + +#define TEST_END sizeof(val) + +/* +** RAM test a board. +** Nothing too complicated, just enough to check it out. +*/ +int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, int slot) +{ + struct DpRam __iomem *DpRam = caddr; + void __iomem *ram[4]; + int size[4]; + int op, bank; + int nbanks; + + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Reset host type=%d, DpRam=%p, slot=%d\n", + type, DpRam, slot); + + RIOHostReset(type, DpRam, slot); + + /* + ** Scrub the memory. This comes in several banks: + ** DPsram1 - 7000h bytes + ** DPsram2 - 200h bytes + ** DPsram3 - 7000h bytes + ** scratch - 1000h bytes + */ + + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Setup ram/size arrays\n"); + + size[0] = DP_SRAM1_SIZE; + size[1] = DP_SRAM2_SIZE; + size[2] = DP_SRAM3_SIZE; + size[3] = DP_SCRATCH_SIZE; + + ram[0] = DpRam->DpSram1; + ram[1] = DpRam->DpSram2; + ram[2] = DpRam->DpSram3; + nbanks = (type == RIO_PCI) ? 3 : 4; + if (nbanks == 4) + ram[3] = DpRam->DpScratch; + + + if (nbanks == 3) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Memory: %p(0x%x), %p(0x%x), %p(0x%x)\n", + ram[0], size[0], ram[1], size[1], ram[2], size[2]); + } else { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: %p(0x%x), %p(0x%x), %p(0x%x), %p(0x%x)\n", + ram[0], size[0], ram[1], size[1], ram[2], size[2], ram[3], size[3]); + } + + /* + ** This scrub operation will test for crosstalk between + ** banks. TEST_END is a magic number, and relates to the offset + ** within the 'val' array used by Scrub. + */ + for (op=0; opMapping[UnitId].Name, "UNKNOWN RTA X-XX", 17); + HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts); + if ((UnitId+1) > 9) { + HostP->Mapping[UnitId].Name[14]='0'+((UnitId+1)/10); + HostP->Mapping[UnitId].Name[15]='0'+((UnitId+1)%10); + } + else { + HostP->Mapping[UnitId].Name[14]='1'+UnitId; + HostP->Mapping[UnitId].Name[15]=0; + } + return 0; +} + +#define RIO_RELEASE "Linux" +#define RELEASE_ID "1.0" + +static struct rioVersion stVersion; + +struct rioVersion *RIOVersid(void) +{ + strlcpy(stVersion.version, "RIO driver for linux V1.0", + sizeof(stVersion.version)); + strlcpy(stVersion.buildDate, __DATE__, + sizeof(stVersion.buildDate)); + + return &stVersion; +} + +void RIOHostReset(unsigned int Type, struct DpRam __iomem *DpRamP, unsigned int Slot) +{ + /* + ** Reset the Tpu + */ + rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: type 0x%x", Type); + switch ( Type ) { + case RIO_AT: + rio_dprintk (RIO_DEBUG_INIT, " (RIO_AT)\n"); + writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | BYTE_OPERATION | + SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl); + writeb(0xFF, &DpRamP->DpResetTpu); + udelay(3); + rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: Don't know if it worked. Try reset again\n"); + writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | + BYTE_OPERATION | SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl); + writeb(0xFF, &DpRamP->DpResetTpu); + udelay(3); + break; + case RIO_PCI: + rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n"); + writeb(RIO_PCI_BOOT_FROM_RAM, &DpRamP->DpControl); + writeb(0xFF, &DpRamP->DpResetInt); + writeb(0xFF, &DpRamP->DpResetTpu); + udelay(100); + break; + default: + rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n"); + break; + } + return; +} diff --git a/drivers/staging/generic_serial/rio/riointr.c b/drivers/staging/generic_serial/rio/riointr.c new file mode 100644 index 000000000000..2e71aecae206 --- /dev/null +++ b/drivers/staging/generic_serial/rio/riointr.c @@ -0,0 +1,645 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : riointr.c +** SID : 1.2 +** Last Modified : 11/6/98 10:33:44 +** Retrieved : 11/6/98 10:33:49 +** +** ident @(#)riointr.c 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include + +#include "linux_compat.h" +#include "rio_linux.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" +#include "rioioctl.h" + + +static void RIOReceive(struct rio_info *, struct Port *); + + +static char *firstchars(char *p, int nch) +{ + static char buf[2][128]; + static int t = 0; + t = !t; + memcpy(buf[t], p, nch); + buf[t][nch] = 0; + return buf[t]; +} + + +#define INCR( P, I ) ((P) = (((P)+(I)) & p->RIOBufferMask)) +/* Enable and start the transmission of packets */ +void RIOTxEnable(char *en) +{ + struct Port *PortP; + struct rio_info *p; + struct tty_struct *tty; + int c; + struct PKT __iomem *PacketP; + unsigned long flags; + + PortP = (struct Port *) en; + p = (struct rio_info *) PortP->p; + tty = PortP->gs.port.tty; + + + rio_dprintk(RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", PortP->PortNum, PortP->gs.xmit_cnt); + + if (!PortP->gs.xmit_cnt) + return; + + + /* This routine is an order of magnitude simpler than the specialix + version. One of the disadvantages is that this version will send + an incomplete packet (usually 64 bytes instead of 72) once for + every 4k worth of data. Let's just say that this won't influence + performance significantly..... */ + + rio_spin_lock_irqsave(&PortP->portSem, flags); + + while (can_add_transmit(&PacketP, PortP)) { + c = PortP->gs.xmit_cnt; + if (c > PKT_MAX_DATA_LEN) + c = PKT_MAX_DATA_LEN; + + /* Don't copy past the end of the source buffer */ + if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail) + c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail; + + { + int t; + t = (c > 10) ? 10 : c; + + rio_dprintk(RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", PortP->PortNum, c, firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail, t), firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail + c - t, t)); + } + /* If for one reason or another, we can't copy more data, + we're done! */ + if (c == 0) + break; + + rio_memcpy_toio(PortP->HostP->Caddr, PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c); + /* udelay (1); */ + + writeb(c, &(PacketP->len)); + if (!(PortP->State & RIO_DELETED)) { + add_transmit(PortP); + /* + ** Count chars tx'd for port statistics reporting + */ + if (PortP->statsGather) + PortP->txchars += c; + } + PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE - 1); + PortP->gs.xmit_cnt -= c; + } + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + + if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2 * PKT_MAX_DATA_LEN)) + tty_wakeup(PortP->gs.port.tty); + +} + + +/* +** RIO Host Service routine. Does all the work traditionally associated with an +** interrupt. +*/ +static int RupIntr; +static int RxIntr; +static int TxIntr; + +void RIOServiceHost(struct rio_info *p, struct Host *HostP) +{ + rio_spin_lock(&HostP->HostLock); + if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { + static int t = 0; + rio_spin_unlock(&HostP->HostLock); + if ((t++ % 200) == 0) + rio_dprintk(RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int) HostP->Flags); + return; + } + rio_spin_unlock(&HostP->HostLock); + + if (readw(&HostP->ParmMapP->rup_intr)) { + writew(0, &HostP->ParmMapP->rup_intr); + p->RIORupCount++; + RupIntr++; + rio_dprintk(RIO_DEBUG_INTR, "rio: RUP interrupt on host %Zd\n", HostP - p->RIOHosts); + RIOPollHostCommands(p, HostP); + } + + if (readw(&HostP->ParmMapP->rx_intr)) { + int port; + + writew(0, &HostP->ParmMapP->rx_intr); + p->RIORxCount++; + RxIntr++; + + rio_dprintk(RIO_DEBUG_INTR, "rio: RX interrupt on host %Zd\n", HostP - p->RIOHosts); + /* + ** Loop through every port. If the port is mapped into + ** the system ( i.e. has /dev/ttyXXXX associated ) then it is + ** worth checking. If the port isn't open, grab any packets + ** hanging on its receive queue and stuff them on the free + ** list; check for commands on the way. + */ + for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) { + struct Port *PortP = p->RIOPortp[port]; + struct tty_struct *ttyP; + struct PKT __iomem *PacketP; + + /* + ** not mapped in - most of the RIOPortp[] information + ** has not been set up! + ** Optimise: ports come in bundles of eight. + */ + if (!PortP->Mapped) { + port += 7; + continue; /* with the next port */ + } + + /* + ** If the host board isn't THIS host board, check the next one. + ** optimise: ports come in bundles of eight. + */ + if (PortP->HostP != HostP) { + port += 7; + continue; + } + + /* + ** Let us see - is the port open? If not, then don't service it. + */ + if (!(PortP->PortState & PORT_ISOPEN)) { + continue; + } + + /* + ** find corresponding tty structure. The process of mapping + ** the ports puts these here. + */ + ttyP = PortP->gs.port.tty; + + /* + ** Lock the port before we begin working on it. + */ + rio_spin_lock(&PortP->portSem); + + /* + ** Process received data if there is any. + */ + if (can_remove_receive(&PacketP, PortP)) + RIOReceive(p, PortP); + + /* + ** If there is no data left to be read from the port, and + ** it's handshake bit is set, then we must clear the handshake, + ** so that that downstream RTA is re-enabled. + */ + if (!can_remove_receive(&PacketP, PortP) && (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET)) { + /* + ** MAGIC! ( Basically, handshake the RX buffer, so that + ** the RTAs upstream can be re-enabled. ) + */ + rio_dprintk(RIO_DEBUG_INTR, "Set RX handshake bit\n"); + writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake); + } + rio_spin_unlock(&PortP->portSem); + } + } + + if (readw(&HostP->ParmMapP->tx_intr)) { + int port; + + writew(0, &HostP->ParmMapP->tx_intr); + + p->RIOTxCount++; + TxIntr++; + rio_dprintk(RIO_DEBUG_INTR, "rio: TX interrupt on host %Zd\n", HostP - p->RIOHosts); + + /* + ** Loop through every port. + ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX + ** associated ) then it is worth checking. + */ + for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) { + struct Port *PortP = p->RIOPortp[port]; + struct tty_struct *ttyP; + struct PKT __iomem *PacketP; + + /* + ** not mapped in - most of the RIOPortp[] information + ** has not been set up! + */ + if (!PortP->Mapped) { + port += 7; + continue; /* with the next port */ + } + + /* + ** If the host board isn't running, then its data structures + ** are no use to us - continue quietly. + */ + if (PortP->HostP != HostP) { + port += 7; + continue; /* with the next port */ + } + + /* + ** Let us see - is the port open? If not, then don't service it. + */ + if (!(PortP->PortState & PORT_ISOPEN)) { + continue; + } + + rio_dprintk(RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port); + /* + ** Lock the port before we begin working on it. + */ + rio_spin_lock(&PortP->portSem); + + /* + ** If we can't add anything to the transmit queue, then + ** we need do none of this processing. + */ + if (!can_add_transmit(&PacketP, PortP)) { + rio_dprintk(RIO_DEBUG_INTR, "Can't add to port, so skipping.\n"); + rio_spin_unlock(&PortP->portSem); + continue; + } + + /* + ** find corresponding tty structure. The process of mapping + ** the ports puts these here. + */ + ttyP = PortP->gs.port.tty; + /* If ttyP is NULL, the port is getting closed. Forget about it. */ + if (!ttyP) { + rio_dprintk(RIO_DEBUG_INTR, "no tty, so skipping.\n"); + rio_spin_unlock(&PortP->portSem); + continue; + } + /* + ** If there is more room available we start up the transmit + ** data process again. This can be direct I/O, if the cookmode + ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the + ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch + ** characters via the line discipline. We must always call + ** the line discipline, + ** so that user input characters can be echoed correctly. + ** + ** ++++ Update +++++ + ** With the advent of double buffering, we now see if + ** TxBufferOut-In is non-zero. If so, then we copy a packet + ** to the output place, and set it going. If this empties + ** the buffer, then we must issue a wakeup( ) on OUT. + ** If it frees space in the buffer then we must issue + ** a wakeup( ) on IN. + ** + ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we + ** have to send a WFLUSH command down the PHB, to mark the + ** end point of a WFLUSH. We also need to clear out any + ** data from the double buffer! ( note that WflushFlag is a + ** *count* of the number of WFLUSH commands outstanding! ) + ** + ** ++++ And there's more! + ** If an RTA is powered off, then on again, and rebooted, + ** whilst it has ports open, then we need to re-open the ports. + ** ( reasonable enough ). We can't do this when we spot the + ** re-boot, in interrupt time, because the queue is probably + ** full. So, when we come in here, we need to test if any + ** ports are in this condition, and re-open the port before + ** we try to send any more data to it. Now, the re-booted + ** RTA will be discarding packets from the PHB until it + ** receives this open packet, but don't worry tooo much + ** about that. The one thing that is interesting is the + ** combination of this effect and the WFLUSH effect! + */ + /* For now don't handle RTA reboots. -- REW. + Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */ + if (PortP->MagicFlags) { + if (PortP->MagicFlags & MAGIC_REBOOT) { + /* + ** well, the RTA has been rebooted, and there is room + ** on its queue to add the open packet that is required. + ** + ** The messy part of this line is trying to decide if + ** we need to call the Param function as a tty or as + ** a modem. + ** DONT USE CLOCAL AS A TEST FOR THIS! + ** + ** If we can't param the port, then move on to the + ** next port. + */ + PortP->InUse = NOT_INUSE; + + rio_spin_unlock(&PortP->portSem); + if (RIOParam(PortP, RIOC_OPEN, ((PortP->Cor2Copy & (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) == (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL) + continue; /* with next port */ + rio_spin_lock(&PortP->portSem); + PortP->MagicFlags &= ~MAGIC_REBOOT; + } + + /* + ** As mentioned above, this is a tacky hack to cope + ** with WFLUSH + */ + if (PortP->WflushFlag) { + rio_dprintk(RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n"); + + if (PortP->InUse) + rio_dprintk(RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n"); + } + + while (PortP->WflushFlag && can_add_transmit(&PacketP, PortP) && (PortP->InUse == NOT_INUSE)) { + int p; + struct PktCmd __iomem *PktCmdP; + + rio_dprintk(RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n"); + /* + ** make it look just like a WFLUSH command + */ + PktCmdP = (struct PktCmd __iomem *) &PacketP->data[0]; + + writeb(RIOC_WFLUSH, &PktCmdP->Command); + + p = PortP->HostPort % (u16) PORTS_PER_RTA; + + /* + ** If second block of ports for 16 port RTA, add 8 + ** to index 8-15. + */ + if (PortP->SecondBlock) + p += PORTS_PER_RTA; + + writeb(p, &PktCmdP->PhbNum); + + /* + ** to make debuggery easier + */ + writeb('W', &PacketP->data[2]); + writeb('F', &PacketP->data[3]); + writeb('L', &PacketP->data[4]); + writeb('U', &PacketP->data[5]); + writeb('S', &PacketP->data[6]); + writeb('H', &PacketP->data[7]); + writeb(' ', &PacketP->data[8]); + writeb('0' + PortP->WflushFlag, &PacketP->data[9]); + writeb(' ', &PacketP->data[10]); + writeb(' ', &PacketP->data[11]); + writeb('\0', &PacketP->data[12]); + + /* + ** its two bytes long! + */ + writeb(PKT_CMD_BIT | 2, &PacketP->len); + + /* + ** queue it! + */ + if (!(PortP->State & RIO_DELETED)) { + add_transmit(PortP); + /* + ** Count chars tx'd for port statistics reporting + */ + if (PortP->statsGather) + PortP->txchars += 2; + } + + if (--(PortP->WflushFlag) == 0) { + PortP->MagicFlags &= ~MAGIC_FLUSH; + } + + rio_dprintk(RIO_DEBUG_INTR, "Wflush count now stands at %d\n", PortP->WflushFlag); + } + if (PortP->MagicFlags & MORE_OUTPUT_EYGOR) { + if (PortP->MagicFlags & MAGIC_FLUSH) { + PortP->MagicFlags |= MORE_OUTPUT_EYGOR; + } else { + if (!can_add_transmit(&PacketP, PortP)) { + rio_spin_unlock(&PortP->portSem); + continue; + } + rio_spin_unlock(&PortP->portSem); + RIOTxEnable((char *) PortP); + rio_spin_lock(&PortP->portSem); + PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR; + } + } + } + + + /* + ** If we can't add anything to the transmit queue, then + ** we need do none of the remaining processing. + */ + if (!can_add_transmit(&PacketP, PortP)) { + rio_spin_unlock(&PortP->portSem); + continue; + } + + rio_spin_unlock(&PortP->portSem); + RIOTxEnable((char *) PortP); + } + } +} + +/* +** Routine for handling received data for tty drivers +*/ +static void RIOReceive(struct rio_info *p, struct Port *PortP) +{ + struct tty_struct *TtyP; + unsigned short transCount; + struct PKT __iomem *PacketP; + register unsigned int DataCnt; + unsigned char __iomem *ptr; + unsigned char *buf; + int copied = 0; + + static int intCount, RxIntCnt; + + /* + ** The receive data process is to remove packets from the + ** PHB until there aren't any more or the current cblock + ** is full. When this occurs, there will be some left over + ** data in the packet, that we must do something with. + ** As we haven't unhooked the packet from the read list + ** yet, we can just leave the packet there, having first + ** made a note of how far we got. This means that we need + ** a pointer per port saying where we start taking the + ** data from - this will normally be zero, but when we + ** run out of space it will be set to the offset of the + ** next byte to copy from the packet data area. The packet + ** length field is decremented by the number of bytes that + ** we successfully removed from the packet. When this reaches + ** zero, we reset the offset pointer to be zero, and free + ** the packet from the front of the queue. + */ + + intCount++; + + TtyP = PortP->gs.port.tty; + if (!TtyP) { + rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: tty is null. \n"); + return; + } + + if (PortP->State & RIO_THROTTLE_RX) { + rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n"); + return; + } + + if (PortP->State & RIO_DELETED) { + while (can_remove_receive(&PacketP, PortP)) { + remove_receive(PortP); + put_free_end(PortP->HostP, PacketP); + } + } else { + /* + ** loop, just so long as: + ** i ) there's some data ( i.e. can_remove_receive ) + ** ii ) we haven't been blocked + ** iii ) there's somewhere to put the data + ** iv ) we haven't outstayed our welcome + */ + transCount = 1; + while (can_remove_receive(&PacketP, PortP) + && transCount) { + RxIntCnt++; + + /* + ** check that it is not a command! + */ + if (readb(&PacketP->len) & PKT_CMD_BIT) { + rio_dprintk(RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n"); + /* rio_dprint(RIO_DEBUG_INTR, (" sysport = %d\n", p->RIOPortp->PortNum)); */ + rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", readb(&PacketP->dest_unit)); + rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", readb(&PacketP->dest_port)); + rio_dprintk(RIO_DEBUG_INTR, " src_unit = %d\n", readb(&PacketP->src_unit)); + rio_dprintk(RIO_DEBUG_INTR, " src_port = %d\n", readb(&PacketP->src_port)); + rio_dprintk(RIO_DEBUG_INTR, " len = %d\n", readb(&PacketP->len)); + rio_dprintk(RIO_DEBUG_INTR, " control = %d\n", readb(&PacketP->control)); + rio_dprintk(RIO_DEBUG_INTR, " csum = %d\n", readw(&PacketP->csum)); + rio_dprintk(RIO_DEBUG_INTR, " data bytes: "); + for (DataCnt = 0; DataCnt < PKT_MAX_DATA_LEN; DataCnt++) + rio_dprintk(RIO_DEBUG_INTR, "%d\n", readb(&PacketP->data[DataCnt])); + remove_receive(PortP); + put_free_end(PortP->HostP, PacketP); + continue; /* with next packet */ + } + + /* + ** How many characters can we move 'upstream' ? + ** + ** Determine the minimum of the amount of data + ** available and the amount of space in which to + ** put it. + ** + ** 1. Get the packet length by masking 'len' + ** for only the length bits. + ** 2. Available space is [buffer size] - [space used] + ** + ** Transfer count is the minimum of packet length + ** and available space. + */ + + transCount = tty_buffer_request_room(TtyP, readb(&PacketP->len) & PKT_LEN_MASK); + rio_dprintk(RIO_DEBUG_REC, "port %d: Copy %d bytes\n", PortP->PortNum, transCount); + /* + ** To use the following 'kkprintfs' for debugging - change the '#undef' + ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the + ** driver). + */ + ptr = (unsigned char __iomem *) PacketP->data + PortP->RxDataStart; + + tty_prepare_flip_string(TtyP, &buf, transCount); + rio_memcpy_fromio(buf, ptr, transCount); + PortP->RxDataStart += transCount; + writeb(readb(&PacketP->len)-transCount, &PacketP->len); + copied += transCount; + + + + if (readb(&PacketP->len) == 0) { + /* + ** If we have emptied the packet, then we can + ** free it, and reset the start pointer for + ** the next packet. + */ + remove_receive(PortP); + put_free_end(PortP->HostP, PacketP); + PortP->RxDataStart = 0; + } + } + } + if (copied) { + rio_dprintk(RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied); + tty_flip_buffer_push(TtyP); + } + + return; +} + diff --git a/drivers/staging/generic_serial/rio/rioioctl.h b/drivers/staging/generic_serial/rio/rioioctl.h new file mode 100644 index 000000000000..e8af5b30519e --- /dev/null +++ b/drivers/staging/generic_serial/rio/rioioctl.h @@ -0,0 +1,57 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rioioctl.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:13 +** Retrieved : 11/6/98 11:34:22 +** +** ident @(#)rioioctl.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rioioctl_h__ +#define __rioioctl_h__ + +/* +** RIO device driver - user ioctls and associated structures. +*/ + +struct portStats { + int port; + int gather; + unsigned long txchars; + unsigned long rxchars; + unsigned long opens; + unsigned long closes; + unsigned long ioctls; +}; + +#define RIOC ('R'<<8)|('i'<<16)|('o'<<24) + +#define RIO_QUICK_CHECK (RIOC | 105) +#define RIO_GATHER_PORT_STATS (RIOC | 193) +#define RIO_RESET_PORT_STATS (RIOC | 194) +#define RIO_GET_PORT_STATS (RIOC | 195) + +#endif /* __rioioctl_h__ */ diff --git a/drivers/staging/generic_serial/rio/rioparam.c b/drivers/staging/generic_serial/rio/rioparam.c new file mode 100644 index 000000000000..6415f3f32a72 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rioparam.c @@ -0,0 +1,663 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rioparam.c +** SID : 1.3 +** Last Modified : 11/6/98 10:33:45 +** Retrieved : 11/6/98 10:33:50 +** +** ident @(#)rioparam.c 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + + +#include "linux_compat.h" +#include "rio_linux.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" +#include "rioioctl.h" +#include "param.h" + + + +/* +** The Scam, based on email from jeremyr@bugs.specialix.co.uk.... +** +** To send a command on a particular port, you put a packet with the +** command bit set onto the port. The command bit is in the len field, +** and gets ORed in with the actual byte count. +** +** When you send a packet with the command bit set the first +** data byte (data[0]) is interpreted as the command to execute. +** It also governs what data structure overlay should accompany the packet. +** Commands are defined in cirrus/cirrus.h +** +** If you want the command to pre-emt data already on the queue for the +** port, set the pre-emptive bit in conjunction with the command bit. +** It is not defined what will happen if you set the preemptive bit +** on a packet that is NOT a command. +** +** Pre-emptive commands should be queued at the head of the queue using +** add_start(), whereas normal commands and data are enqueued using +** add_end(). +** +** Most commands do not use the remaining bytes in the data array. The +** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and +** OPEN are currently analogous). With these three commands the following +** 11 data bytes are all used to pass config information such as baud rate etc. +** The fields are also defined in cirrus.h. Some contain straightforward +** information such as the transmit XON character. Two contain the transmit and +** receive baud rates respectively. For most baud rates there is a direct +** mapping between the rates defined in and the byte in the +** packet. There are additional (non UNIX-standard) rates defined in +** /u/dos/rio/cirrus/h/brates.h. +** +** The rest of the data fields contain approximations to the Cirrus registers +** that are used to program number of bits etc. Each registers bit fields is +** defined in cirrus.h. +** +** NB. Only use those bits that are defined as being driver specific +** or common to the RTA and the driver. +** +** All commands going from RTA->Host will be dealt with by the Host code - you +** will never see them. As with the SI there will be three fields to look out +** for in each phb (not yet defined - needs defining a.s.a.p). +** +** modem_status - current state of handshake pins. +** +** port_status - current port status - equivalent to hi_stat for SI, indicates +** if port is IDLE_OPEN, IDLE_CLOSED etc. +** +** break_status - bit X set if break has been received. +** +** Happy hacking. +** +*/ + +/* +** RIOParam is used to open or configure a port. You pass it a PortP, +** which will have a tty struct attached to it. You also pass a command, +** either OPEN or CONFIG. The port's setup is taken from the t_ fields +** of the tty struct inside the PortP, and the port is either opened +** or re-configured. You must also tell RIOParam if the device is a modem +** device or not (i.e. top bit of minor number set or clear - take special +** care when deciding on this!). +** RIOParam neither flushes nor waits for drain, and is NOT preemptive. +** +** RIOParam assumes it will be called at splrio(), and also assumes +** that CookMode is set correctly in the port structure. +** +** NB. for MPX +** tty lock must NOT have been previously acquired. +*/ +int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag) +{ + struct tty_struct *TtyP; + int retval; + struct phb_param __iomem *phb_param_ptr; + struct PKT __iomem *PacketP; + int res; + u8 Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0; + u8 TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0; + u8 LNext = 0, TxBaud = 0, RxBaud = 0; + int retries = 0xff; + unsigned long flags; + + func_enter(); + + TtyP = PortP->gs.port.tty; + + rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP); + + if (!TtyP) { + rio_dprintk(RIO_DEBUG_PARAM, "Can't call rioparam with null tty.\n"); + + func_exit(); + + return RIO_FAIL; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + + if (cmd == RIOC_OPEN) { + /* + ** If the port is set to store or lock the parameters, and it is + ** paramed with OPEN, we want to restore the saved port termio, but + ** only if StoredTermio has been saved, i.e. NOT 1st open after reboot. + */ + } + + /* + ** wait for space + */ + while (!(res = can_add_transmit(&PacketP, PortP)) || (PortP->InUse != NOT_INUSE)) { + if (retries-- <= 0) { + break; + } + if (PortP->InUse != NOT_INUSE) { + rio_dprintk(RIO_DEBUG_PARAM, "Port IN_USE for pre-emptive command\n"); + } + + if (!res) { + rio_dprintk(RIO_DEBUG_PARAM, "Port has no space on transmit queue\n"); + } + + if (SleepFlag != OK_TO_SLEEP) { + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + func_exit(); + + return RIO_FAIL; + } + + rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + retval = RIODelay(PortP, HUNDRED_MS); + rio_spin_lock_irqsave(&PortP->portSem, flags); + if (retval == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + func_exit(); + return -EINTR; + } + if (PortP->State & RIO_DELETED) { + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + func_exit(); + return 0; + } + } + + if (!res) { + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + func_exit(); + + return RIO_FAIL; + } + + rio_dprintk(RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n", res); + rio_dprintk(RIO_DEBUG_PARAM, "Packet is %p\n", PacketP); + + phb_param_ptr = (struct phb_param __iomem *) PacketP->data; + + + switch (TtyP->termios->c_cflag & CSIZE) { + case CS5: + { + rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n"); + Cor1 |= RIOC_COR1_5BITS; + break; + } + case CS6: + { + rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n"); + Cor1 |= RIOC_COR1_6BITS; + break; + } + case CS7: + { + rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n"); + Cor1 |= RIOC_COR1_7BITS; + break; + } + case CS8: + { + rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n"); + Cor1 |= RIOC_COR1_8BITS; + break; + } + } + + if (TtyP->termios->c_cflag & CSTOPB) { + rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n"); + Cor1 |= RIOC_COR1_2STOP; + } else { + rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n"); + Cor1 |= RIOC_COR1_1STOP; + } + + if (TtyP->termios->c_cflag & PARENB) { + rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n"); + Cor1 |= RIOC_COR1_NORMAL; + } else { + rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n"); + Cor1 |= RIOC_COR1_NOP; + } + if (TtyP->termios->c_cflag & PARODD) { + rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n"); + Cor1 |= RIOC_COR1_ODD; + } else { + rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n"); + Cor1 |= RIOC_COR1_EVEN; + } + + /* + ** COR 2 + */ + if (TtyP->termios->c_iflag & IXON) { + rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n"); + Cor2 |= RIOC_COR2_IXON; + } else { + if (PortP->Config & RIO_IXON) { + rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n"); + Cor2 |= RIOC_COR2_IXON; + } else + rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n"); + } + + if (TtyP->termios->c_iflag & IXANY) { + if (PortP->Config & RIO_IXANY) { + rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n"); + Cor2 |= RIOC_COR2_IXANY; + } else + rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n"); + } + + if (TtyP->termios->c_iflag & IXOFF) { + rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n"); + Cor2 |= RIOC_COR2_IXOFF; + } + + if (TtyP->termios->c_cflag & HUPCL) { + rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n"); + Cor2 |= RIOC_COR2_HUPCL; + } + + if (C_CRTSCTS(TtyP)) { + rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n"); + Cor2 |= RIOC_COR2_CTSFLOW; + Cor2 |= RIOC_COR2_RTSFLOW; + } else { + rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n"); + Cor2 &= ~RIOC_COR2_CTSFLOW; + Cor2 &= ~RIOC_COR2_RTSFLOW; + } + + + if (TtyP->termios->c_cflag & CLOCAL) { + rio_dprintk(RIO_DEBUG_PARAM, "Local line\n"); + } else { + rio_dprintk(RIO_DEBUG_PARAM, "Possible Modem line\n"); + } + + /* + ** COR 4 (there is no COR 3) + */ + if (TtyP->termios->c_iflag & IGNBRK) { + rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n"); + Cor4 |= RIOC_COR4_IGNBRK; + } + if (!(TtyP->termios->c_iflag & BRKINT)) { + rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n"); + Cor4 |= RIOC_COR4_NBRKINT; + } else { + rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on break condition\n"); + } + + if (TtyP->termios->c_iflag & INLCR) { + rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n"); + Cor4 |= RIOC_COR4_INLCR; + } + + if (TtyP->termios->c_iflag & IGNCR) { + rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n"); + Cor4 |= RIOC_COR4_IGNCR; + } + + if (TtyP->termios->c_iflag & ICRNL) { + rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n"); + Cor4 |= RIOC_COR4_ICRNL; + } + if (TtyP->termios->c_iflag & IGNPAR) { + rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n"); + Cor4 |= RIOC_COR4_IGNPAR; + } + if (TtyP->termios->c_iflag & PARMRK) { + rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n"); + Cor4 |= RIOC_COR4_PARMRK; + } + + /* + ** Set the RAISEMOD flag to ensure that the modem lines are raised + ** on reception of a config packet. + ** The download code handles the zero baud condition. + */ + Cor4 |= RIOC_COR4_RAISEMOD; + + /* + ** COR 5 + */ + + Cor5 = RIOC_COR5_CMOE; + + /* + ** Set to monitor tbusy/tstop (or not). + */ + + if (PortP->MonitorTstate) + Cor5 |= RIOC_COR5_TSTATE_ON; + else + Cor5 |= RIOC_COR5_TSTATE_OFF; + + /* + ** Could set LNE here if you wanted LNext processing. SVR4 will use it. + */ + if (TtyP->termios->c_iflag & ISTRIP) { + rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n"); + if (!(PortP->State & RIO_TRIAD_MODE)) { + Cor5 |= RIOC_COR5_ISTRIP; + } + } + + if (TtyP->termios->c_oflag & ONLCR) { + rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n"); + if (PortP->CookMode == COOK_MEDIUM) + Cor5 |= RIOC_COR5_ONLCR; + } + if (TtyP->termios->c_oflag & OCRNL) { + rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n"); + if (PortP->CookMode == COOK_MEDIUM) + Cor5 |= RIOC_COR5_OCRNL; + } + if ((TtyP->termios->c_oflag & TABDLY) == TAB3) { + rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n"); + if (PortP->CookMode == COOK_MEDIUM) + Cor5 |= RIOC_COR5_TAB3; + } + + /* + ** Flow control bytes. + */ + TxXon = TtyP->termios->c_cc[VSTART]; + TxXoff = TtyP->termios->c_cc[VSTOP]; + RxXon = TtyP->termios->c_cc[VSTART]; + RxXoff = TtyP->termios->c_cc[VSTOP]; + /* + ** LNEXT byte + */ + LNext = 0; + + /* + ** Baud rate bytes + */ + rio_dprintk(RIO_DEBUG_PARAM, "Mapping of rx/tx baud %x (%x)\n", TtyP->termios->c_cflag, CBAUD); + + switch (TtyP->termios->c_cflag & CBAUD) { +#define e(b) case B ## b : RxBaud = TxBaud = RIO_B ## b ;break + e(50); + e(75); + e(110); + e(134); + e(150); + e(200); + e(300); + e(600); + e(1200); + e(1800); + e(2400); + e(4800); + e(9600); + e(19200); + e(38400); + e(57600); + e(115200); /* e(230400);e(460800); e(921600); */ + } + + rio_dprintk(RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud); + + + /* + ** Leftovers + */ + if (TtyP->termios->c_cflag & CREAD) + rio_dprintk(RIO_DEBUG_PARAM, "Enable receiver\n"); +#ifdef RCV1EN + if (TtyP->termios->c_cflag & RCV1EN) + rio_dprintk(RIO_DEBUG_PARAM, "RCV1EN (?)\n"); +#endif +#ifdef XMT1EN + if (TtyP->termios->c_cflag & XMT1EN) + rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n"); +#endif + if (TtyP->termios->c_lflag & ISIG) + rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n"); + if (TtyP->termios->c_lflag & ICANON) + rio_dprintk(RIO_DEBUG_PARAM, "Canonical input: erase and kill enabled\n"); + if (TtyP->termios->c_lflag & XCASE) + rio_dprintk(RIO_DEBUG_PARAM, "Canonical upper/lower presentation\n"); + if (TtyP->termios->c_lflag & ECHO) + rio_dprintk(RIO_DEBUG_PARAM, "Enable input echo\n"); + if (TtyP->termios->c_lflag & ECHOE) + rio_dprintk(RIO_DEBUG_PARAM, "Enable echo erase\n"); + if (TtyP->termios->c_lflag & ECHOK) + rio_dprintk(RIO_DEBUG_PARAM, "Enable echo kill\n"); + if (TtyP->termios->c_lflag & ECHONL) + rio_dprintk(RIO_DEBUG_PARAM, "Enable echo newline\n"); + if (TtyP->termios->c_lflag & NOFLSH) + rio_dprintk(RIO_DEBUG_PARAM, "Disable flush after interrupt or quit\n"); +#ifdef TOSTOP + if (TtyP->termios->c_lflag & TOSTOP) + rio_dprintk(RIO_DEBUG_PARAM, "Send SIGTTOU for background output\n"); +#endif +#ifdef XCLUDE + if (TtyP->termios->c_lflag & XCLUDE) + rio_dprintk(RIO_DEBUG_PARAM, "Exclusive use of this line\n"); +#endif + if (TtyP->termios->c_iflag & IUCLC) + rio_dprintk(RIO_DEBUG_PARAM, "Map uppercase to lowercase on input\n"); + if (TtyP->termios->c_oflag & OPOST) + rio_dprintk(RIO_DEBUG_PARAM, "Enable output post-processing\n"); + if (TtyP->termios->c_oflag & OLCUC) + rio_dprintk(RIO_DEBUG_PARAM, "Map lowercase to uppercase on output\n"); + if (TtyP->termios->c_oflag & ONOCR) + rio_dprintk(RIO_DEBUG_PARAM, "No carriage return output at column 0\n"); + if (TtyP->termios->c_oflag & ONLRET) + rio_dprintk(RIO_DEBUG_PARAM, "Newline performs carriage return function\n"); + if (TtyP->termios->c_oflag & OFILL) + rio_dprintk(RIO_DEBUG_PARAM, "Use fill characters for delay\n"); + if (TtyP->termios->c_oflag & OFDEL) + rio_dprintk(RIO_DEBUG_PARAM, "Fill character is DEL\n"); + if (TtyP->termios->c_oflag & NLDLY) + rio_dprintk(RIO_DEBUG_PARAM, "Newline delay set\n"); + if (TtyP->termios->c_oflag & CRDLY) + rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n"); + if (TtyP->termios->c_oflag & TABDLY) + rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n"); + /* + ** These things are kind of useful in a later life! + */ + PortP->Cor2Copy = Cor2; + + if (PortP->State & RIO_DELETED) { + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + func_exit(); + + return RIO_FAIL; + } + + /* + ** Actually write the info into the packet to be sent + */ + writeb(cmd, &phb_param_ptr->Cmd); + writeb(Cor1, &phb_param_ptr->Cor1); + writeb(Cor2, &phb_param_ptr->Cor2); + writeb(Cor4, &phb_param_ptr->Cor4); + writeb(Cor5, &phb_param_ptr->Cor5); + writeb(TxXon, &phb_param_ptr->TxXon); + writeb(RxXon, &phb_param_ptr->RxXon); + writeb(TxXoff, &phb_param_ptr->TxXoff); + writeb(RxXoff, &phb_param_ptr->RxXoff); + writeb(LNext, &phb_param_ptr->LNext); + writeb(TxBaud, &phb_param_ptr->TxBaud); + writeb(RxBaud, &phb_param_ptr->RxBaud); + + /* + ** Set the length/command field + */ + writeb(12 | PKT_CMD_BIT, &PacketP->len); + + /* + ** The packet is formed - now, whack it off + ** to its final destination: + */ + add_transmit(PortP); + /* + ** Count characters transmitted for port statistics reporting + */ + if (PortP->statsGather) + PortP->txchars += 12; + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + + rio_dprintk(RIO_DEBUG_PARAM, "add_transmit returned.\n"); + /* + ** job done. + */ + func_exit(); + + return 0; +} + + +/* +** We can add another packet to a transmit queue if the packet pointer pointed +** to by the TxAdd pointer has PKT_IN_USE clear in its address. +*/ +int can_add_transmit(struct PKT __iomem **PktP, struct Port *PortP) +{ + struct PKT __iomem *tp; + + *PktP = tp = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->TxAdd)); + + return !((unsigned long) tp & PKT_IN_USE); +} + +/* +** To add a packet to the queue, you set the PKT_IN_USE bit in the address, +** and then move the TxAdd pointer along one position to point to the next +** packet pointer. You must wrap the pointer from the end back to the start. +*/ +void add_transmit(struct Port *PortP) +{ + if (readw(PortP->TxAdd) & PKT_IN_USE) { + rio_dprintk(RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!"); + } + writew(readw(PortP->TxAdd) | PKT_IN_USE, PortP->TxAdd); + PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : PortP->TxAdd + 1; + writew(RIO_OFF(PortP->Caddr, PortP->TxAdd), &PortP->PhbP->tx_add); +} + +/**************************************** + * Put a packet onto the end of the + * free list + ****************************************/ +void put_free_end(struct Host *HostP, struct PKT __iomem *PktP) +{ + struct rio_free_list __iomem *tmp_pointer; + unsigned short old_end, new_end; + unsigned long flags; + + rio_spin_lock_irqsave(&HostP->HostLock, flags); + + /************************************************* + * Put a packet back onto the back of the free list + * + ************************************************/ + + rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%p)\n", PktP); + + if ((old_end = readw(&HostP->ParmMapP->free_list_end)) != TPNULL) { + new_end = RIO_OFF(HostP->Caddr, PktP); + tmp_pointer = (struct rio_free_list __iomem *) RIO_PTR(HostP->Caddr, old_end); + writew(new_end, &tmp_pointer->next); + writew(old_end, &((struct rio_free_list __iomem *) PktP)->prev); + writew(TPNULL, &((struct rio_free_list __iomem *) PktP)->next); + writew(new_end, &HostP->ParmMapP->free_list_end); + } else { /* First packet on the free list this should never happen! */ + rio_dprintk(RIO_DEBUG_PFE, "put_free_end(): This should never happen\n"); + writew(RIO_OFF(HostP->Caddr, PktP), &HostP->ParmMapP->free_list_end); + tmp_pointer = (struct rio_free_list __iomem *) PktP; + writew(TPNULL, &tmp_pointer->prev); + writew(TPNULL, &tmp_pointer->next); + } + rio_dprintk(RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock); + rio_spin_unlock_irqrestore(&HostP->HostLock, flags); +} + +/* +** can_remove_receive(PktP,P) returns non-zero if PKT_IN_USE is set +** for the next packet on the queue. It will also set PktP to point to the +** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear, +** then can_remove_receive() returns 0. +*/ +int can_remove_receive(struct PKT __iomem **PktP, struct Port *PortP) +{ + if (readw(PortP->RxRemove) & PKT_IN_USE) { + *PktP = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->RxRemove) & ~PKT_IN_USE); + return 1; + } + return 0; +} + +/* +** To remove a packet from the receive queue you clear its PKT_IN_USE bit, +** and then bump the pointers. Once the pointers get to the end, they must +** be wrapped back to the start. +*/ +void remove_receive(struct Port *PortP) +{ + writew(readw(PortP->RxRemove) & ~PKT_IN_USE, PortP->RxRemove); + PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : PortP->RxRemove + 1; + writew(RIO_OFF(PortP->Caddr, PortP->RxRemove), &PortP->PhbP->rx_remove); +} diff --git a/drivers/staging/generic_serial/rio/rioroute.c b/drivers/staging/generic_serial/rio/rioroute.c new file mode 100644 index 000000000000..f9b936ac3394 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rioroute.c @@ -0,0 +1,1039 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rioroute.c +** SID : 1.3 +** Last Modified : 11/6/98 10:33:46 +** Retrieved : 11/6/98 10:33:50 +** +** ident @(#)rioroute.c 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + + +#include "linux_compat.h" +#include "rio_linux.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" +#include "rioioctl.h" +#include "param.h" + +static int RIOCheckIsolated(struct rio_info *, struct Host *, unsigned int); +static int RIOIsolate(struct rio_info *, struct Host *, unsigned int); +static int RIOCheck(struct Host *, unsigned int); +static void RIOConCon(struct rio_info *, struct Host *, unsigned int, unsigned int, unsigned int, unsigned int, int); + + +/* +** Incoming on the ROUTE_RUP +** I wrote this while I was tired. Forgive me. +*/ +int RIORouteRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem * PacketP) +{ + struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data; + struct PktCmd_M *PktReplyP; + struct CmdBlk *CmdBlkP; + struct Port *PortP; + struct Map *MapP; + struct Top *TopP; + int ThisLink, ThisLinkMin, ThisLinkMax; + int port; + int Mod, Mod1, Mod2; + unsigned short RtaType; + unsigned int RtaUniq; + unsigned int ThisUnit, ThisUnit2; /* 2 ids to accommodate 16 port RTA */ + unsigned int OldUnit, NewUnit, OldLink, NewLink; + char *MyType, *MyName; + int Lies; + unsigned long flags; + + /* + ** Is this unit telling us it's current link topology? + */ + if (readb(&PktCmdP->Command) == ROUTE_TOPOLOGY) { + MapP = HostP->Mapping; + + /* + ** The packet can be sent either by the host or by an RTA. + ** If it comes from the host, then we need to fill in the + ** Topology array in the host structure. If it came in + ** from an RTA then we need to fill in the Mapping structure's + ** Topology array for the unit. + */ + if (Rup >= (unsigned short) MAX_RUP) { + ThisUnit = HOST_ID; + TopP = HostP->Topology; + MyType = "Host"; + MyName = HostP->Name; + ThisLinkMin = ThisLinkMax = Rup - MAX_RUP; + } else { + ThisUnit = Rup + 1; + TopP = HostP->Mapping[Rup].Topology; + MyType = "RTA"; + MyName = HostP->Mapping[Rup].Name; + ThisLinkMin = 0; + ThisLinkMax = LINKS_PER_UNIT - 1; + } + + /* + ** Lies will not be tolerated. + ** If any pair of links claim to be connected to the same + ** place, then ignore this packet completely. + */ + Lies = 0; + for (ThisLink = ThisLinkMin + 1; ThisLink <= ThisLinkMax; ThisLink++) { + /* + ** it won't lie about network interconnect, total disconnects + ** and no-IDs. (or at least, it doesn't *matter* if it does) + */ + if (readb(&PktCmdP->RouteTopology[ThisLink].Unit) > (unsigned short) MAX_RUP) + continue; + + for (NewLink = ThisLinkMin; NewLink < ThisLink; NewLink++) { + if ((readb(&PktCmdP->RouteTopology[ThisLink].Unit) == readb(&PktCmdP->RouteTopology[NewLink].Unit)) && (readb(&PktCmdP->RouteTopology[ThisLink].Link) == readb(&PktCmdP->RouteTopology[NewLink].Link))) { + Lies++; + } + } + } + + if (Lies) { + rio_dprintk(RIO_DEBUG_ROUTE, "LIES! DAMN LIES! %d LIES!\n", Lies); + rio_dprintk(RIO_DEBUG_ROUTE, "%d:%c %d:%c %d:%c %d:%c\n", + readb(&PktCmdP->RouteTopology[0].Unit), + 'A' + readb(&PktCmdP->RouteTopology[0].Link), + readb(&PktCmdP->RouteTopology[1].Unit), + 'A' + readb(&PktCmdP->RouteTopology[1].Link), readb(&PktCmdP->RouteTopology[2].Unit), 'A' + readb(&PktCmdP->RouteTopology[2].Link), readb(&PktCmdP->RouteTopology[3].Unit), 'A' + readb(&PktCmdP->RouteTopology[3].Link)); + return 1; + } + + /* + ** now, process each link. + */ + for (ThisLink = ThisLinkMin; ThisLink <= ThisLinkMax; ThisLink++) { + /* + ** this is what it was connected to + */ + OldUnit = TopP[ThisLink].Unit; + OldLink = TopP[ThisLink].Link; + + /* + ** this is what it is now connected to + */ + NewUnit = readb(&PktCmdP->RouteTopology[ThisLink].Unit); + NewLink = readb(&PktCmdP->RouteTopology[ThisLink].Link); + + if (OldUnit != NewUnit || OldLink != NewLink) { + /* + ** something has changed! + */ + + if (NewUnit > MAX_RUP && NewUnit != ROUTE_DISCONNECT && NewUnit != ROUTE_NO_ID && NewUnit != ROUTE_INTERCONNECT) { + rio_dprintk(RIO_DEBUG_ROUTE, "I have a link from %s %s to unit %d:%d - I don't like it.\n", MyType, MyName, NewUnit, NewLink); + } else { + /* + ** put the new values in + */ + TopP[ThisLink].Unit = NewUnit; + TopP[ThisLink].Link = NewLink; + + RIOSetChange(p); + + if (OldUnit <= MAX_RUP) { + /* + ** If something has become bust, then re-enable them messages + */ + if (!p->RIONoMessage) + RIOConCon(p, HostP, ThisUnit, ThisLink, OldUnit, OldLink, DISCONNECT); + } + + if ((NewUnit <= MAX_RUP) && !p->RIONoMessage) + RIOConCon(p, HostP, ThisUnit, ThisLink, NewUnit, NewLink, CONNECT); + + if (NewUnit == ROUTE_NO_ID) + rio_dprintk(RIO_DEBUG_ROUTE, "%s %s (%c) is connected to an unconfigured unit.\n", MyType, MyName, 'A' + ThisLink); + + if (NewUnit == ROUTE_INTERCONNECT) { + if (!p->RIONoMessage) + printk(KERN_DEBUG "rio: %s '%s' (%c) is connected to another network.\n", MyType, MyName, 'A' + ThisLink); + } + + /* + ** perform an update for 'the other end', so that these messages + ** only appears once. Only disconnect the other end if it is pointing + ** at us! + */ + if (OldUnit == HOST_ID) { + if (HostP->Topology[OldLink].Unit == ThisUnit && HostP->Topology[OldLink].Link == ThisLink) { + rio_dprintk(RIO_DEBUG_ROUTE, "SETTING HOST (%c) TO DISCONNECTED!\n", OldLink + 'A'); + HostP->Topology[OldLink].Unit = ROUTE_DISCONNECT; + HostP->Topology[OldLink].Link = NO_LINK; + } else { + rio_dprintk(RIO_DEBUG_ROUTE, "HOST(%c) WAS NOT CONNECTED TO %s (%c)!\n", OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A'); + } + } else if (OldUnit <= MAX_RUP) { + if (HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit == ThisUnit && HostP->Mapping[OldUnit - 1].Topology[OldLink].Link == ThisLink) { + rio_dprintk(RIO_DEBUG_ROUTE, "SETTING RTA %s (%c) TO DISCONNECTED!\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A'); + HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit = ROUTE_DISCONNECT; + HostP->Mapping[OldUnit - 1].Topology[OldLink].Link = NO_LINK; + } else { + rio_dprintk(RIO_DEBUG_ROUTE, "RTA %s (%c) WAS NOT CONNECTED TO %s (%c)\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A'); + } + } + if (NewUnit == HOST_ID) { + rio_dprintk(RIO_DEBUG_ROUTE, "MARKING HOST (%c) CONNECTED TO %s (%c)\n", NewLink + 'A', MyName, ThisLink + 'A'); + HostP->Topology[NewLink].Unit = ThisUnit; + HostP->Topology[NewLink].Link = ThisLink; + } else if (NewUnit <= MAX_RUP) { + rio_dprintk(RIO_DEBUG_ROUTE, "MARKING RTA %s (%c) CONNECTED TO %s (%c)\n", HostP->Mapping[NewUnit - 1].Name, NewLink + 'A', MyName, ThisLink + 'A'); + HostP->Mapping[NewUnit - 1].Topology[NewLink].Unit = ThisUnit; + HostP->Mapping[NewUnit - 1].Topology[NewLink].Link = ThisLink; + } + } + RIOSetChange(p); + RIOCheckIsolated(p, HostP, OldUnit); + } + } + return 1; + } + + /* + ** The only other command we recognise is a route_request command + */ + if (readb(&PktCmdP->Command) != ROUTE_REQUEST) { + rio_dprintk(RIO_DEBUG_ROUTE, "Unknown command %d received on rup %d host %p ROUTE_RUP\n", readb(&PktCmdP->Command), Rup, HostP); + return 1; + } + + RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24); + + /* + ** Determine if 8 or 16 port RTA + */ + RtaType = GetUnitType(RtaUniq); + + rio_dprintk(RIO_DEBUG_ROUTE, "Received a request for an ID for serial number %x\n", RtaUniq); + + Mod = readb(&PktCmdP->ModuleTypes); + Mod1 = LONYBLE(Mod); + if (RtaType == TYPE_RTA16) { + /* + ** Only one ident is set for a 16 port RTA. To make compatible + ** with 8 port, set 2nd ident in Mod2 to the same as Mod1. + */ + Mod2 = Mod1; + rio_dprintk(RIO_DEBUG_ROUTE, "Backplane type is %s (all ports)\n", p->RIOModuleTypes[Mod1].Name); + } else { + Mod2 = HINYBLE(Mod); + rio_dprintk(RIO_DEBUG_ROUTE, "Module types are %s (ports 0-3) and %s (ports 4-7)\n", p->RIOModuleTypes[Mod1].Name, p->RIOModuleTypes[Mod2].Name); + } + + /* + ** try to unhook a command block from the command free list. + */ + if (!(CmdBlkP = RIOGetCmdBlk())) { + rio_dprintk(RIO_DEBUG_ROUTE, "No command blocks to route RTA! come back later.\n"); + return 0; + } + + /* + ** Fill in the default info on the command block + */ + CmdBlkP->Packet.dest_unit = Rup; + CmdBlkP->Packet.dest_port = ROUTE_RUP; + CmdBlkP->Packet.src_unit = HOST_ID; + CmdBlkP->Packet.src_port = ROUTE_RUP; + CmdBlkP->Packet.len = PKT_CMD_BIT | 1; + CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; + PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data; + + if (!RIOBootOk(p, HostP, RtaUniq)) { + rio_dprintk(RIO_DEBUG_ROUTE, "RTA %x tried to get an ID, but does not belong - FOAD it!\n", RtaUniq); + PktReplyP->Command = ROUTE_FOAD; + memcpy(PktReplyP->CommandText, "RT_FOAD", 7); + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + return 1; + } + + /* + ** Check to see if the RTA is configured for this host + */ + for (ThisUnit = 0; ThisUnit < MAX_RUP; ThisUnit++) { + rio_dprintk(RIO_DEBUG_ROUTE, "Entry %d Flags=%s %s UniqueNum=0x%x\n", + ThisUnit, HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE ? "Slot-In-Use" : "Not In Use", HostP->Mapping[ThisUnit].Flags & SLOT_TENTATIVE ? "Slot-Tentative" : "Not Tentative", HostP->Mapping[ThisUnit].RtaUniqueNum); + + /* + ** We have an entry for it. + */ + if ((HostP->Mapping[ThisUnit].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (HostP->Mapping[ThisUnit].RtaUniqueNum == RtaUniq)) { + if (RtaType == TYPE_RTA16) { + ThisUnit2 = HostP->Mapping[ThisUnit].ID2 - 1; + rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slots %d+%d\n", RtaUniq, ThisUnit, ThisUnit2); + } else + rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slot %d\n", RtaUniq, ThisUnit); + /* + ** If we have no knowledge of booting it, then the host has + ** been re-booted, and so we must kill the RTA, so that it + ** will be booted again (potentially with new bins) + ** and it will then re-ask for an ID, which we will service. + */ + if ((HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) && !(HostP->Mapping[ThisUnit].Flags & RTA_BOOTED)) { + if (!(HostP->Mapping[ThisUnit].Flags & MSG_DONE)) { + if (!p->RIONoMessage) + printk(KERN_DEBUG "rio: RTA '%s' is being updated.\n", HostP->Mapping[ThisUnit].Name); + HostP->Mapping[ThisUnit].Flags |= MSG_DONE; + } + PktReplyP->Command = ROUTE_FOAD; + memcpy(PktReplyP->CommandText, "RT_FOAD", 7); + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + return 1; + } + + /* + ** Send the ID (entry) to this RTA. The ID number is implicit as + ** the offset into the table. It is worth noting at this stage + ** that offset zero in the table contains the entries for the + ** RTA with ID 1!!!! + */ + PktReplyP->Command = ROUTE_ALLOCATE; + PktReplyP->IDNum = ThisUnit + 1; + if (RtaType == TYPE_RTA16) { + if (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) + /* + ** Adjust the phb and tx pkt dest_units for 2nd block of 8 + ** only if the RTA has ports associated (SLOT_IN_USE) + */ + RIOFixPhbs(p, HostP, ThisUnit2); + PktReplyP->IDNum2 = ThisUnit2 + 1; + rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated IDs %d+%d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum, PktReplyP->IDNum2); + } else { + PktReplyP->IDNum2 = ROUTE_NO_ID; + rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated ID %d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum); + } + memcpy(PktReplyP->CommandText, "RT_ALLOCAT", 10); + + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + + /* + ** If this is a freshly booted RTA, then we need to re-open + ** the ports, if any where open, so that data may once more + ** flow around the system! + */ + if ((HostP->Mapping[ThisUnit].Flags & RTA_NEWBOOT) && (HostP->Mapping[ThisUnit].SysPort != NO_PORT)) { + /* + ** look at the ports associated with this beast and + ** see if any where open. If they was, then re-open + ** them, using the info from the tty flags. + */ + for (port = 0; port < PORTS_PER_RTA; port++) { + PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]; + if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { + rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n"); + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->MagicFlags |= MAGIC_REBOOT; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + } + } + if (RtaType == TYPE_RTA16) { + for (port = 0; port < PORTS_PER_RTA; port++) { + PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]; + if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { + rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n"); + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->MagicFlags |= MAGIC_REBOOT; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + } + } + } + } + + /* + ** keep a copy of the module types! + */ + HostP->UnixRups[ThisUnit].ModTypes = Mod; + if (RtaType == TYPE_RTA16) + HostP->UnixRups[ThisUnit2].ModTypes = Mod; + + /* + ** If either of the modules on this unit is read-only or write-only + ** or none-xprint, then we need to transfer that info over to the + ** relevant ports. + */ + if (HostP->Mapping[ThisUnit].SysPort != NO_PORT) { + for (port = 0; port < PORTS_PER_MODULE; port++) { + p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; + p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; + p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; + p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; + } + if (RtaType == TYPE_RTA16) { + for (port = 0; port < PORTS_PER_MODULE; port++) { + p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; + p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; + p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; + p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; + } + } + } + + /* + ** Job done, get on with the interrupts! + */ + return 1; + } + } + /* + ** There is no table entry for this RTA at all. + ** + ** Lets check to see if we actually booted this unit - if not, + ** then we reset it and it will go round the loop of being booted + ** we can then worry about trying to fit it into the table. + */ + for (ThisUnit = 0; ThisUnit < HostP->NumExtraBooted; ThisUnit++) + if (HostP->ExtraUnits[ThisUnit] == RtaUniq) + break; + if (ThisUnit == HostP->NumExtraBooted && ThisUnit != MAX_EXTRA_UNITS) { + /* + ** if the unit wasn't in the table, and the table wasn't full, then + ** we reset the unit, because we didn't boot it. + ** However, if the table is full, it could be that we did boot + ** this unit, and so we won't reboot it, because it isn't really + ** all that disasterous to keep the old bins in most cases. This + ** is a rather tacky feature, but we are on the edge of reallity + ** here, because the implication is that someone has connected + ** 16+MAX_EXTRA_UNITS onto one host. + */ + static int UnknownMesgDone = 0; + + if (!UnknownMesgDone) { + if (!p->RIONoMessage) + printk(KERN_DEBUG "rio: One or more unknown RTAs are being updated.\n"); + UnknownMesgDone = 1; + } + + PktReplyP->Command = ROUTE_FOAD; + memcpy(PktReplyP->CommandText, "RT_FOAD", 7); + } else { + /* + ** we did boot it (as an extra), and there may now be a table + ** slot free (because of a delete), so we will try to make + ** a tentative entry for it, so that the configurator can see it + ** and fill in the details for us. + */ + if (RtaType == TYPE_RTA16) { + if (RIOFindFreeID(p, HostP, &ThisUnit, &ThisUnit2) == 0) { + RIODefaultName(p, HostP, ThisUnit); + rio_fill_host_slot(ThisUnit, ThisUnit2, RtaUniq, HostP); + } + } else { + if (RIOFindFreeID(p, HostP, &ThisUnit, NULL) == 0) { + RIODefaultName(p, HostP, ThisUnit); + rio_fill_host_slot(ThisUnit, 0, RtaUniq, HostP); + } + } + PktReplyP->Command = ROUTE_USED; + memcpy(PktReplyP->CommandText, "RT_USED", 7); + } + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + return 1; +} + + +void RIOFixPhbs(struct rio_info *p, struct Host *HostP, unsigned int unit) +{ + unsigned short link, port; + struct Port *PortP; + unsigned long flags; + int PortN = HostP->Mapping[unit].SysPort; + + rio_dprintk(RIO_DEBUG_ROUTE, "RIOFixPhbs unit %d sysport %d\n", unit, PortN); + + if (PortN != -1) { + unsigned short dest_unit = HostP->Mapping[unit].ID2; + + /* + ** Get the link number used for the 1st 8 phbs on this unit. + */ + PortP = p->RIOPortp[HostP->Mapping[dest_unit - 1].SysPort]; + + link = readw(&PortP->PhbP->link); + + for (port = 0; port < PORTS_PER_RTA; port++, PortN++) { + unsigned short dest_port = port + 8; + u16 __iomem *TxPktP; + struct PKT __iomem *Pkt; + + PortP = p->RIOPortp[PortN]; + + rio_spin_lock_irqsave(&PortP->portSem, flags); + /* + ** If RTA is not powered on, the tx packets will be + ** unset, so go no further. + */ + if (!PortP->TxStart) { + rio_dprintk(RIO_DEBUG_ROUTE, "Tx pkts not set up yet\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + break; + } + + /* + ** For the second slot of a 16 port RTA, the driver needs to + ** sort out the phb to port mappings. The dest_unit for this + ** group of 8 phbs is set to the dest_unit of the accompanying + ** 8 port block. The dest_port of the second unit is set to + ** be in the range 8-15 (i.e. 8 is added). Thus, for a 16 port + ** RTA with IDs 5 and 6, traffic bound for port 6 of unit 6 + ** (being the second map ID) will be sent to dest_unit 5, port + ** 14. When this RTA is deleted, dest_unit for ID 6 will be + ** restored, and the dest_port will be reduced by 8. + ** Transmit packets also have a destination field which needs + ** adjusting in the same manner. + ** Note that the unit/port bytes in 'dest' are swapped. + ** We also need to adjust the phb and rup link numbers for the + ** second block of 8 ttys. + */ + for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) { + /* + ** *TxPktP is the pointer to the transmit packet on the host + ** card. This needs to be translated into a 32 bit pointer + ** so it can be accessed from the driver. + */ + Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(TxPktP)); + + /* + ** If the packet is used, reset it. + */ + Pkt = (struct PKT __iomem *) ((unsigned long) Pkt & ~PKT_IN_USE); + writeb(dest_unit, &Pkt->dest_unit); + writeb(dest_port, &Pkt->dest_port); + } + rio_dprintk(RIO_DEBUG_ROUTE, "phb dest: Old %x:%x New %x:%x\n", readw(&PortP->PhbP->destination) & 0xff, (readw(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port); + writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination); + writew(link, &PortP->PhbP->link); + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + } + /* + ** Now make sure the range of ports to be serviced includes + ** the 2nd 8 on this 16 port RTA. + */ + if (link > 3) + return; + if (((unit * 8) + 7) > readw(&HostP->LinkStrP[link].last_port)) { + rio_dprintk(RIO_DEBUG_ROUTE, "last port on host link %d: %d\n", link, (unit * 8) + 7); + writew((unit * 8) + 7, &HostP->LinkStrP[link].last_port); + } + } +} + +/* +** Check to see if the new disconnection has isolated this unit. +** If it has, then invalidate all its link information, and tell +** the world about it. This is done to ensure that the configurator +** only gets up-to-date information about what is going on. +*/ +static int RIOCheckIsolated(struct rio_info *p, struct Host *HostP, unsigned int UnitId) +{ + unsigned long flags; + rio_spin_lock_irqsave(&HostP->HostLock, flags); + + if (RIOCheck(HostP, UnitId)) { + rio_dprintk(RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId); + rio_spin_unlock_irqrestore(&HostP->HostLock, flags); + return (0); + } + + RIOIsolate(p, HostP, UnitId); + RIOSetChange(p); + rio_spin_unlock_irqrestore(&HostP->HostLock, flags); + return 1; +} + +/* +** Invalidate all the link interconnectivity of this unit, and of +** all the units attached to it. This will mean that the entire +** subnet will re-introduce itself. +*/ +static int RIOIsolate(struct rio_info *p, struct Host *HostP, unsigned int UnitId) +{ + unsigned int link, unit; + + UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */ + + if (UnitId >= MAX_RUP) /* dontcha just lurv unsigned maths! */ + return (0); + + if (HostP->Mapping[UnitId].Flags & BEEN_HERE) + return (0); + + HostP->Mapping[UnitId].Flags |= BEEN_HERE; + + if (p->RIOPrintDisabled == DO_PRINT) + rio_dprintk(RIO_DEBUG_ROUTE, "RIOMesgIsolated %s", HostP->Mapping[UnitId].Name); + + for (link = 0; link < LINKS_PER_UNIT; link++) { + unit = HostP->Mapping[UnitId].Topology[link].Unit; + HostP->Mapping[UnitId].Topology[link].Unit = ROUTE_DISCONNECT; + HostP->Mapping[UnitId].Topology[link].Link = NO_LINK; + RIOIsolate(p, HostP, unit); + } + HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; + return 1; +} + +static int RIOCheck(struct Host *HostP, unsigned int UnitId) +{ + unsigned char link; + +/* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */ + rio_dprintk(RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId); + + if (UnitId == HOST_ID) { + /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is NOT isolated - it IS the host!\n", UnitId)); */ + return 1; + } + + UnitId--; + + if (UnitId >= MAX_RUP) { + /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d - ignored.\n", UnitId)); */ + return 0; + } + + for (link = 0; link < LINKS_PER_UNIT; link++) { + if (HostP->Mapping[UnitId].Topology[link].Unit == HOST_ID) { + /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected directly to host via link (%c).\n", + UnitId, 'A'+link)); */ + return 1; + } + } + + if (HostP->Mapping[UnitId].Flags & BEEN_HERE) { + /* rio_dprint(RIO_DEBUG_ROUTE, ("Been to Unit %d before - ignoring\n", UnitId)); */ + return 0; + } + + HostP->Mapping[UnitId].Flags |= BEEN_HERE; + + for (link = 0; link < LINKS_PER_UNIT; link++) { + /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d check link (%c)\n", UnitId,'A'+link)); */ + if (RIOCheck(HostP, HostP->Mapping[UnitId].Topology[link].Unit)) { + /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected to something that knows the host via link (%c)\n", UnitId,link+'A')); */ + HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; + return 1; + } + } + + HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; + + /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESNT KNOW THE HOST!\n", UnitId)); */ + + return 0; +} + +/* +** Returns the type of unit (host, 16/8 port RTA) +*/ + +unsigned int GetUnitType(unsigned int Uniq) +{ + switch ((Uniq >> 28) & 0xf) { + case RIO_AT: + case RIO_MCA: + case RIO_EISA: + case RIO_PCI: + rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Host\n"); + return (TYPE_HOST); + case RIO_RTA_16: + rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 16 port RTA\n"); + return (TYPE_RTA16); + case RIO_RTA: + rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 8 port RTA\n"); + return (TYPE_RTA8); + default: + rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Unrecognised\n"); + return (99); + } +} + +int RIOSetChange(struct rio_info *p) +{ + if (p->RIOQuickCheck != NOT_CHANGED) + return (0); + p->RIOQuickCheck = CHANGED; + if (p->RIOSignalProcess) { + rio_dprintk(RIO_DEBUG_ROUTE, "Send SIG-HUP"); + /* + psignal( RIOSignalProcess, SIGHUP ); + */ + } + return (0); +} + +static void RIOConCon(struct rio_info *p, + struct Host *HostP, + unsigned int FromId, + unsigned int FromLink, + unsigned int ToId, + unsigned int ToLink, + int Change) +{ + char *FromName; + char *FromType; + char *ToName; + char *ToType; + unsigned int tp; + +/* +** 15.10.1998 ARG - ESIL 0759 +** (Part) fix for port being trashed when opened whilst RTA "disconnected" +** +** What's this doing in here anyway ? +** It was causing the port to be 'unmapped' if opened whilst RTA "disconnected" +** +** 09.12.1998 ARG - ESIL 0776 - part fix +** Okay, We've found out what this was all about now ! +** Someone had botched this to use RIOHalted to indicated the number of RTAs +** 'disconnected'. The value in RIOHalted was then being used in the +** 'RIO_QUICK_CHECK' ioctl. A none zero value indicating that a least one RTA +** is 'disconnected'. The change was put in to satisfy a customer's needs. +** Having taken this bit of code out 'RIO_QUICK_CHECK' now no longer works for +** the customer. +** + if (Change == CONNECT) { + if (p->RIOHalted) p->RIOHalted --; + } + else { + p->RIOHalted ++; + } +** +** So - we need to implement it slightly differently - a new member of the +** rio_info struct - RIORtaDisCons (RIO RTA connections) keeps track of RTA +** connections and disconnections. +*/ + if (Change == CONNECT) { + if (p->RIORtaDisCons) + p->RIORtaDisCons--; + } else { + p->RIORtaDisCons++; + } + + if (p->RIOPrintDisabled == DONT_PRINT) + return; + + if (FromId > ToId) { + tp = FromId; + FromId = ToId; + ToId = tp; + tp = FromLink; + FromLink = ToLink; + ToLink = tp; + } + + FromName = FromId ? HostP->Mapping[FromId - 1].Name : HostP->Name; + FromType = FromId ? "RTA" : "HOST"; + ToName = ToId ? HostP->Mapping[ToId - 1].Name : HostP->Name; + ToType = ToId ? "RTA" : "HOST"; + + rio_dprintk(RIO_DEBUG_ROUTE, "Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected"); + printk(KERN_DEBUG "rio: Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected"); +} + +/* +** RIORemoveFromSavedTable : +** +** Delete and RTA entry from the saved table given to us +** by the configuration program. +*/ +static int RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap) +{ + int entry; + + /* + ** We loop for all entries even after finding an entry and + ** zeroing it because we may have two entries to delete if + ** it's a 16 port RTA. + */ + for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { + if (p->RIOSavedTable[entry].RtaUniqueNum == pMap->RtaUniqueNum) { + memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map)); + } + } + return 0; +} + + +/* +** RIOCheckDisconnected : +** +** Scan the unit links to and return zero if the unit is completely +** disconnected. +*/ +static int RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit) +{ + int link; + + + rio_dprintk(RIO_DEBUG_ROUTE, "RIOFreeDisconnect unit %d\n", unit); + /* + ** If the slot is tentative and does not belong to the + ** second half of a 16 port RTA then scan to see if + ** is disconnected. + */ + for (link = 0; link < LINKS_PER_UNIT; link++) { + if (HostP->Mapping[unit].Topology[link].Unit != ROUTE_DISCONNECT) + break; + } + + /* + ** If not all links are disconnected then we can forget about it. + */ + if (link < LINKS_PER_UNIT) + return 1; + +#ifdef NEED_TO_FIX_THIS + /* Ok so all the links are disconnected. But we may have only just + ** made this slot tentative and not yet received a topology update. + ** Lets check how long ago we made it tentative. + */ + rio_dprintk(RIO_DEBUG_ROUTE, "Just about to check LBOLT on entry %d\n", unit); + if (drv_getparm(LBOLT, (ulong_t *) & current_time)) + rio_dprintk(RIO_DEBUG_ROUTE, "drv_getparm(LBOLT,....) Failed.\n"); + + elapse_time = current_time - TentTime[unit]; + rio_dprintk(RIO_DEBUG_ROUTE, "elapse %d = current %d - tent %d (%d usec)\n", elapse_time, current_time, TentTime[unit], drv_hztousec(elapse_time)); + if (drv_hztousec(elapse_time) < WAIT_TO_FINISH) { + rio_dprintk(RIO_DEBUG_ROUTE, "Skipping slot %d, not timed out yet %d\n", unit, drv_hztousec(elapse_time)); + return 1; + } +#endif + + /* + ** We have found an usable slot. + ** If it is half of a 16 port RTA then delete the other half. + */ + if (HostP->Mapping[unit].ID2 != 0) { + int nOther = (HostP->Mapping[unit].ID2) - 1; + + rio_dprintk(RIO_DEBUG_ROUTE, "RioFreedis second slot %d.\n", nOther); + memset(&HostP->Mapping[nOther], 0, sizeof(struct Map)); + } + RIORemoveFromSavedTable(p, &HostP->Mapping[unit]); + + return 0; +} + + +/* +** RIOFindFreeID : +** +** This function scans the given host table for either one +** or two free unit ID's. +*/ + +int RIOFindFreeID(struct rio_info *p, struct Host *HostP, unsigned int * pID1, unsigned int * pID2) +{ + int unit, tempID; + + /* + ** Initialise the ID's to MAX_RUP. + ** We do this to make the loop for setting the ID's as simple as + ** possible. + */ + *pID1 = MAX_RUP; + if (pID2 != NULL) + *pID2 = MAX_RUP; + + /* + ** Scan all entries of the host mapping table for free slots. + ** We scan for free slots first and then if that is not successful + ** we start all over again looking for tentative slots we can re-use. + */ + for (unit = 0; unit < MAX_RUP; unit++) { + rio_dprintk(RIO_DEBUG_ROUTE, "Scanning unit %d\n", unit); + /* + ** If the flags are zero then the slot is empty. + */ + if (HostP->Mapping[unit].Flags == 0) { + rio_dprintk(RIO_DEBUG_ROUTE, " This slot is empty.\n"); + /* + ** If we haven't allocated the first ID then do it now. + */ + if (*pID1 == MAX_RUP) { + rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for first unit %d\n", unit); + *pID1 = unit; + + /* + ** If the second ID is not needed then we can return + ** now. + */ + if (pID2 == NULL) + return 0; + } else { + /* + ** Allocate the second slot and return. + */ + rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for second unit %d\n", unit); + *pID2 = unit; + return 0; + } + } + } + + /* + ** If we manage to come out of the free slot loop then we + ** need to start all over again looking for tentative slots + ** that we can re-use. + */ + rio_dprintk(RIO_DEBUG_ROUTE, "Starting to scan for tentative slots\n"); + for (unit = 0; unit < MAX_RUP; unit++) { + if (((HostP->Mapping[unit].Flags & SLOT_TENTATIVE) || (HostP->Mapping[unit].Flags == 0)) && !(HostP->Mapping[unit].Flags & RTA16_SECOND_SLOT)) { + rio_dprintk(RIO_DEBUG_ROUTE, " Slot %d looks promising.\n", unit); + + if (unit == *pID1) { + rio_dprintk(RIO_DEBUG_ROUTE, " No it isn't, its the 1st half\n"); + continue; + } + + /* + ** Slot is Tentative or Empty, but not a tentative second + ** slot of a 16 porter. + ** Attempt to free up this slot (and its parnter if + ** it is a 16 port slot. The second slot will become + ** empty after a call to RIOFreeDisconnected so thats why + ** we look for empty slots above as well). + */ + if (HostP->Mapping[unit].Flags != 0) + if (RIOFreeDisconnected(p, HostP, unit) != 0) + continue; + /* + ** If we haven't allocated the first ID then do it now. + */ + if (*pID1 == MAX_RUP) { + rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative entry for first unit %d\n", unit); + *pID1 = unit; + + /* + ** Clear out this slot now that we intend to use it. + */ + memset(&HostP->Mapping[unit], 0, sizeof(struct Map)); + + /* + ** If the second ID is not needed then we can return + ** now. + */ + if (pID2 == NULL) + return 0; + } else { + /* + ** Allocate the second slot and return. + */ + rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative/empty entry for second unit %d\n", unit); + *pID2 = unit; + + /* + ** Clear out this slot now that we intend to use it. + */ + memset(&HostP->Mapping[unit], 0, sizeof(struct Map)); + + /* At this point under the right(wrong?) conditions + ** we may have a first unit ID being higher than the + ** second unit ID. This is a bad idea if we are about + ** to fill the slots with a 16 port RTA. + ** Better check and swap them over. + */ + + if (*pID1 > *pID2) { + rio_dprintk(RIO_DEBUG_ROUTE, "Swapping IDS %d %d\n", *pID1, *pID2); + tempID = *pID1; + *pID1 = *pID2; + *pID2 = tempID; + } + return 0; + } + } + } + + /* + ** If we manage to get to the end of the second loop then we + ** can give up and return a failure. + */ + return 1; +} + + +/* +** The link switch scenario. +** +** Rta Wun (A) is connected to Tuw (A). +** The tables are all up to date, and the system is OK. +** +** If Wun (A) is now moved to Wun (B) before Wun (A) can +** become disconnected, then the follow happens: +** +** Tuw (A) spots the change of unit:link at the other end +** of its link and Tuw sends a topology packet reflecting +** the change: Tuw (A) now disconnected from Wun (A), and +** this is closely followed by a packet indicating that +** Tuw (A) is now connected to Wun (B). +** +** Wun (B) will spot that it has now become connected, and +** Wun will send a topology packet, which indicates that +** both Wun (A) and Wun (B) is connected to Tuw (A). +** +** Eventually Wun (A) realises that it is now disconnected +** and Wun will send out a topology packet indicating that +** Wun (A) is now disconnected. +*/ diff --git a/drivers/staging/generic_serial/rio/riospace.h b/drivers/staging/generic_serial/rio/riospace.h new file mode 100644 index 000000000000..ffb31d4332b9 --- /dev/null +++ b/drivers/staging/generic_serial/rio/riospace.h @@ -0,0 +1,154 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : riospace.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:13 +** Retrieved : 11/6/98 11:34:22 +** +** ident @(#)riospace.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_riospace_h__ +#define __rio_riospace_h__ + +#define RIO_LOCATOR_LEN 16 +#define MAX_RIO_BOARDS 4 + +/* +** DONT change this file. At all. Unless you can rebuild the entire +** device driver, which you probably can't, then the rest of the +** driver won't see any changes you make here. So don't make any. +** In particular, it won't be able to see changes to RIO_SLOTS +*/ + +struct Conf { + char Locator[24]; + unsigned int StartupTime; + unsigned int SlowCook; + unsigned int IntrPollTime; + unsigned int BreakInterval; + unsigned int Timer; + unsigned int RtaLoadBase; + unsigned int HostLoadBase; + unsigned int XpHz; + unsigned int XpCps; + char *XpOn; + char *XpOff; + unsigned int MaxXpCps; + unsigned int MinXpCps; + unsigned int SpinCmds; + unsigned int FirstAddr; + unsigned int LastAddr; + unsigned int BufferSize; + unsigned int LowWater; + unsigned int LineLength; + unsigned int CmdTime; +}; + +/* +** Board types - these MUST correspond to product codes! +*/ +#define RIO_EMPTY 0x0 +#define RIO_EISA 0x3 +#define RIO_RTA_16 0x9 +#define RIO_AT 0xA +#define RIO_MCA 0xB +#define RIO_PCI 0xD +#define RIO_RTA 0xE + +/* +** Board data structure. This is used for configuration info +*/ +struct Brd { + unsigned char Type; /* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */ + unsigned char Ivec; /* POLLED or ivec number */ + unsigned char Mode; /* Control stuff, see below */ +}; + +struct Board { + char Locator[RIO_LOCATOR_LEN]; + int NumSlots; + struct Brd Boards[MAX_RIO_BOARDS]; +}; + +#define BOOT_FROM_LINK 0x00 +#define BOOT_FROM_RAM 0x01 +#define EXTERNAL_BUS_OFF 0x00 +#define EXTERNAL_BUS_ON 0x02 +#define INTERRUPT_DISABLE 0x00 +#define INTERRUPT_ENABLE 0x04 +#define BYTE_OPERATION 0x00 +#define WORD_OPERATION 0x08 +#define POLLED INTERRUPT_DISABLE +#define IRQ_15 (0x00 | INTERRUPT_ENABLE) +#define IRQ_12 (0x10 | INTERRUPT_ENABLE) +#define IRQ_11 (0x20 | INTERRUPT_ENABLE) +#define IRQ_9 (0x30 | INTERRUPT_ENABLE) +#define SLOW_LINKS 0x00 +#define FAST_LINKS 0x40 +#define SLOW_AT_BUS 0x00 +#define FAST_AT_BUS 0x80 +#define SLOW_PCI_TP 0x00 +#define FAST_PCI_TP 0x80 +/* +** Debug levels +*/ +#define DBG_NONE 0x00000000 + +#define DBG_INIT 0x00000001 +#define DBG_OPEN 0x00000002 +#define DBG_CLOSE 0x00000004 +#define DBG_IOCTL 0x00000008 + +#define DBG_READ 0x00000010 +#define DBG_WRITE 0x00000020 +#define DBG_INTR 0x00000040 +#define DBG_PROC 0x00000080 + +#define DBG_PARAM 0x00000100 +#define DBG_CMD 0x00000200 +#define DBG_XPRINT 0x00000400 +#define DBG_POLL 0x00000800 + +#define DBG_DAEMON 0x00001000 +#define DBG_FAIL 0x00002000 +#define DBG_MODEM 0x00004000 +#define DBG_LIST 0x00008000 + +#define DBG_ROUTE 0x00010000 +#define DBG_UTIL 0x00020000 +#define DBG_BOOT 0x00040000 +#define DBG_BUFFER 0x00080000 + +#define DBG_MON 0x00100000 +#define DBG_SPECIAL 0x00200000 +#define DBG_VPIX 0x00400000 +#define DBG_FLUSH 0x00800000 + +#define DBG_QENABLE 0x01000000 + +#define DBG_ALWAYS 0x80000000 + +#endif /* __rio_riospace_h__ */ diff --git a/drivers/staging/generic_serial/rio/riotable.c b/drivers/staging/generic_serial/rio/riotable.c new file mode 100644 index 000000000000..3d15802dc0f3 --- /dev/null +++ b/drivers/staging/generic_serial/rio/riotable.c @@ -0,0 +1,941 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : riotable.c +** SID : 1.2 +** Last Modified : 11/6/98 10:33:47 +** Retrieved : 11/6/98 10:33:50 +** +** ident @(#)riotable.c 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include + + +#include "linux_compat.h" +#include "rio_linux.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" +#include "rioioctl.h" +#include "param.h" +#include "protsts.h" + +/* +** A configuration table has been loaded. It is now up to us +** to sort it out and use the information contained therein. +*/ +int RIONewTable(struct rio_info *p) +{ + int Host, Host1, Host2, NameIsUnique, Entry, SubEnt; + struct Map *MapP; + struct Map *HostMapP; + struct Host *HostP; + + char *cptr; + + /* + ** We have been sent a new table to install. We need to break + ** it down into little bits and spread it around a bit to see + ** what we have got. + */ + /* + ** Things to check: + ** (things marked 'xx' aren't checked any more!) + ** (1) That there are no booted Hosts/RTAs out there. + ** (2) That the names are properly formed + ** (3) That blank entries really are. + ** xx (4) That hosts mentioned in the table actually exist. xx + ** (5) That the IDs are unique (per host). + ** (6) That host IDs are zero + ** (7) That port numbers are valid + ** (8) That port numbers aren't duplicated + ** (9) That names aren't duplicated + ** xx (10) That hosts that actually exist are mentioned in the table. xx + */ + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(1)\n"); + if (p->RIOSystemUp) { /* (1) */ + p->RIOError.Error = HOST_HAS_ALREADY_BEEN_BOOTED; + return -EBUSY; + } + + p->RIOError.Error = NOTHING_WRONG_AT_ALL; + p->RIOError.Entry = -1; + p->RIOError.Other = -1; + + for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { + MapP = &p->RIOConnectTable[Entry]; + if ((MapP->Flags & RTA16_SECOND_SLOT) == 0) { + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(2)\n"); + cptr = MapP->Name; /* (2) */ + cptr[MAX_NAME_LEN - 1] = '\0'; + if (cptr[0] == '\0') { + memcpy(MapP->Name, MapP->RtaUniqueNum ? "RTA NN" : "HOST NN", 8); + MapP->Name[5] = '0' + Entry / 10; + MapP->Name[6] = '0' + Entry % 10; + } + while (*cptr) { + if (*cptr < ' ' || *cptr > '~') { + p->RIOError.Error = BAD_CHARACTER_IN_NAME; + p->RIOError.Entry = Entry; + return -ENXIO; + } + cptr++; + } + } + + /* + ** If the entry saved was a tentative entry then just forget + ** about it. + */ + if (MapP->Flags & SLOT_TENTATIVE) { + MapP->HostUniqueNum = 0; + MapP->RtaUniqueNum = 0; + continue; + } + + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(3)\n"); + if (!MapP->RtaUniqueNum && !MapP->HostUniqueNum) { /* (3) */ + if (MapP->ID || MapP->SysPort || MapP->Flags) { + rio_dprintk(RIO_DEBUG_TABLE, "%s pretending to be empty but isn't\n", MapP->Name); + p->RIOError.Error = TABLE_ENTRY_ISNT_PROPERLY_NULL; + p->RIOError.Entry = Entry; + return -ENXIO; + } + rio_dprintk(RIO_DEBUG_TABLE, "!RIO: Daemon: test (3) passes\n"); + continue; + } + + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(4)\n"); + for (Host = 0; Host < p->RIONumHosts; Host++) { /* (4) */ + if (p->RIOHosts[Host].UniqueNum == MapP->HostUniqueNum) { + HostP = &p->RIOHosts[Host]; + /* + ** having done the lookup, we don't really want to do + ** it again, so hang the host number in a safe place + */ + MapP->Topology[0].Unit = Host; + break; + } + } + + if (Host >= p->RIONumHosts) { + rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has unknown host unique number 0x%x\n", MapP->Name, MapP->HostUniqueNum); + MapP->HostUniqueNum = 0; + /* MapP->RtaUniqueNum = 0; */ + /* MapP->ID = 0; */ + /* MapP->Flags = 0; */ + /* MapP->SysPort = 0; */ + /* MapP->Name[0] = 0; */ + continue; + } + + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(5)\n"); + if (MapP->RtaUniqueNum) { /* (5) */ + if (!MapP->ID) { + rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an ID of zero!\n", MapP->Name); + p->RIOError.Error = ZERO_RTA_ID; + p->RIOError.Entry = Entry; + return -ENXIO; + } + if (MapP->ID > MAX_RUP) { + rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an invalid ID %d\n", MapP->Name, MapP->ID); + p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; + p->RIOError.Entry = Entry; + return -ENXIO; + } + for (SubEnt = 0; SubEnt < Entry; SubEnt++) { + if (MapP->HostUniqueNum == p->RIOConnectTable[SubEnt].HostUniqueNum && MapP->ID == p->RIOConnectTable[SubEnt].ID) { + rio_dprintk(RIO_DEBUG_TABLE, "Dupl. ID number allocated to RTA %s and RTA %s\n", MapP->Name, p->RIOConnectTable[SubEnt].Name); + p->RIOError.Error = DUPLICATED_RTA_ID; + p->RIOError.Entry = Entry; + p->RIOError.Other = SubEnt; + return -ENXIO; + } + /* + ** If the RtaUniqueNum is the same, it may be looking at both + ** entries for a 16 port RTA, so check the ids + */ + if ((MapP->RtaUniqueNum == p->RIOConnectTable[SubEnt].RtaUniqueNum) + && (MapP->ID2 != p->RIOConnectTable[SubEnt].ID)) { + rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", MapP->Name); + rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", p->RIOConnectTable[SubEnt].Name); + p->RIOError.Error = DUPLICATE_UNIQUE_NUMBER; + p->RIOError.Entry = Entry; + p->RIOError.Other = SubEnt; + return -ENXIO; + } + } + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7a)\n"); + /* (7a) */ + if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) { + rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d-RTA %s is not a multiple of %d!\n", (int) MapP->SysPort, MapP->Name, PORTS_PER_RTA); + p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; + p->RIOError.Entry = Entry; + return -ENXIO; + } + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7b)\n"); + /* (7b) */ + if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) { + rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d for RTA %s is too big\n", (int) MapP->SysPort, MapP->Name); + p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; + p->RIOError.Entry = Entry; + return -ENXIO; + } + for (SubEnt = 0; SubEnt < Entry; SubEnt++) { + if (p->RIOConnectTable[SubEnt].Flags & RTA16_SECOND_SLOT) + continue; + if (p->RIOConnectTable[SubEnt].RtaUniqueNum) { + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(8)\n"); + /* (8) */ + if ((MapP->SysPort != NO_PORT) && (MapP->SysPort == p->RIOConnectTable[SubEnt].SysPort)) { + rio_dprintk(RIO_DEBUG_TABLE, "RTA %s:same TTY port # as RTA %s (%d)\n", MapP->Name, p->RIOConnectTable[SubEnt].Name, (int) MapP->SysPort); + p->RIOError.Error = TTY_NUMBER_IN_USE; + p->RIOError.Entry = Entry; + p->RIOError.Other = SubEnt; + return -ENXIO; + } + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(9)\n"); + if (strcmp(MapP->Name, p->RIOConnectTable[SubEnt].Name) == 0 && !(MapP->Flags & RTA16_SECOND_SLOT)) { /* (9) */ + rio_dprintk(RIO_DEBUG_TABLE, "RTA name %s used twice\n", MapP->Name); + p->RIOError.Error = NAME_USED_TWICE; + p->RIOError.Entry = Entry; + p->RIOError.Other = SubEnt; + return -ENXIO; + } + } + } + } else { /* (6) */ + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(6)\n"); + if (MapP->ID) { + rio_dprintk(RIO_DEBUG_TABLE, "RIO:HOST %s has been allocated ID that isn't zero!\n", MapP->Name); + p->RIOError.Error = HOST_ID_NOT_ZERO; + p->RIOError.Entry = Entry; + return -ENXIO; + } + if (MapP->SysPort != NO_PORT) { + rio_dprintk(RIO_DEBUG_TABLE, "RIO: HOST %s has been allocated port numbers!\n", MapP->Name); + p->RIOError.Error = HOST_SYSPORT_BAD; + p->RIOError.Entry = Entry; + return -ENXIO; + } + } + } + + /* + ** wow! if we get here then it's a goody! + */ + + /* + ** Zero the (old) entries for each host... + */ + for (Host = 0; Host < RIO_HOSTS; Host++) { + for (Entry = 0; Entry < MAX_RUP; Entry++) { + memset(&p->RIOHosts[Host].Mapping[Entry], 0, sizeof(struct Map)); + } + memset(&p->RIOHosts[Host].Name[0], 0, sizeof(p->RIOHosts[Host].Name)); + } + + /* + ** Copy in the new table entries + */ + for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { + rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: Copy table for Host entry %d\n", Entry); + MapP = &p->RIOConnectTable[Entry]; + + /* + ** Now, if it is an empty slot ignore it! + */ + if (MapP->HostUniqueNum == 0) + continue; + + /* + ** we saved the host number earlier, so grab it back + */ + HostP = &p->RIOHosts[MapP->Topology[0].Unit]; + + /* + ** If it is a host, then we only need to fill in the name field. + */ + if (MapP->ID == 0) { + rio_dprintk(RIO_DEBUG_TABLE, "Host entry found. Name %s\n", MapP->Name); + memcpy(HostP->Name, MapP->Name, MAX_NAME_LEN); + continue; + } + + /* + ** Its an RTA entry, so fill in the host mapping entries for it + ** and the port mapping entries. Notice that entry zero is for + ** ID one. + */ + HostMapP = &HostP->Mapping[MapP->ID - 1]; + + if (MapP->Flags & SLOT_IN_USE) { + rio_dprintk(RIO_DEBUG_TABLE, "Rta entry found. Name %s\n", MapP->Name); + /* + ** structure assign, then sort out the bits we shouldn't have done + */ + *HostMapP = *MapP; + + HostMapP->Flags = SLOT_IN_USE; + if (MapP->Flags & RTA16_SECOND_SLOT) + HostMapP->Flags |= RTA16_SECOND_SLOT; + + RIOReMapPorts(p, HostP, HostMapP); + } else { + rio_dprintk(RIO_DEBUG_TABLE, "TENTATIVE Rta entry found. Name %s\n", MapP->Name); + } + } + + for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { + p->RIOSavedTable[Entry] = p->RIOConnectTable[Entry]; + } + + for (Host = 0; Host < p->RIONumHosts; Host++) { + for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) { + p->RIOHosts[Host].Topology[SubEnt].Unit = ROUTE_DISCONNECT; + p->RIOHosts[Host].Topology[SubEnt].Link = NO_LINK; + } + for (Entry = 0; Entry < MAX_RUP; Entry++) { + for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) { + p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Unit = ROUTE_DISCONNECT; + p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Link = NO_LINK; + } + } + if (!p->RIOHosts[Host].Name[0]) { + memcpy(p->RIOHosts[Host].Name, "HOST 1", 7); + p->RIOHosts[Host].Name[5] += Host; + } + /* + ** Check that default name assigned is unique. + */ + Host1 = Host; + NameIsUnique = 0; + while (!NameIsUnique) { + NameIsUnique = 1; + for (Host2 = 0; Host2 < p->RIONumHosts; Host2++) { + if (Host2 == Host) + continue; + if (strcmp(p->RIOHosts[Host].Name, p->RIOHosts[Host2].Name) + == 0) { + NameIsUnique = 0; + Host1++; + if (Host1 >= p->RIONumHosts) + Host1 = 0; + p->RIOHosts[Host].Name[5] = '1' + Host1; + } + } + } + /* + ** Rename host if name already used. + */ + if (Host1 != Host) { + rio_dprintk(RIO_DEBUG_TABLE, "Default name %s already used\n", p->RIOHosts[Host].Name); + memcpy(p->RIOHosts[Host].Name, "HOST 1", 7); + p->RIOHosts[Host].Name[5] += Host1; + } + rio_dprintk(RIO_DEBUG_TABLE, "Assigning default name %s\n", p->RIOHosts[Host].Name); + } + return 0; +} + +/* +** User process needs the config table - build it from first +** principles. +** +* FIXME: SMP locking +*/ +int RIOApel(struct rio_info *p) +{ + int Host; + int link; + int Rup; + int Next = 0; + struct Map *MapP; + struct Host *HostP; + unsigned long flags; + + rio_dprintk(RIO_DEBUG_TABLE, "Generating a table to return to config.rio\n"); + + memset(&p->RIOConnectTable[0], 0, sizeof(struct Map) * TOTAL_MAP_ENTRIES); + + for (Host = 0; Host < RIO_HOSTS; Host++) { + rio_dprintk(RIO_DEBUG_TABLE, "Processing host %d\n", Host); + HostP = &p->RIOHosts[Host]; + rio_spin_lock_irqsave(&HostP->HostLock, flags); + + MapP = &p->RIOConnectTable[Next++]; + MapP->HostUniqueNum = HostP->UniqueNum; + if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { + rio_spin_unlock_irqrestore(&HostP->HostLock, flags); + continue; + } + MapP->RtaUniqueNum = 0; + MapP->ID = 0; + MapP->Flags = SLOT_IN_USE; + MapP->SysPort = NO_PORT; + for (link = 0; link < LINKS_PER_UNIT; link++) + MapP->Topology[link] = HostP->Topology[link]; + memcpy(MapP->Name, HostP->Name, MAX_NAME_LEN); + for (Rup = 0; Rup < MAX_RUP; Rup++) { + if (HostP->Mapping[Rup].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) { + p->RIOConnectTable[Next] = HostP->Mapping[Rup]; + if (HostP->Mapping[Rup].Flags & SLOT_IN_USE) + p->RIOConnectTable[Next].Flags |= SLOT_IN_USE; + if (HostP->Mapping[Rup].Flags & SLOT_TENTATIVE) + p->RIOConnectTable[Next].Flags |= SLOT_TENTATIVE; + if (HostP->Mapping[Rup].Flags & RTA16_SECOND_SLOT) + p->RIOConnectTable[Next].Flags |= RTA16_SECOND_SLOT; + Next++; + } + } + rio_spin_unlock_irqrestore(&HostP->HostLock, flags); + } + return 0; +} + +/* +** config.rio has taken a dislike to one of the gross maps entries. +** if the entry is suitably inactive, then we can gob on it and remove +** it from the table. +*/ +int RIODeleteRta(struct rio_info *p, struct Map *MapP) +{ + int host, entry, port, link; + int SysPort; + struct Host *HostP; + struct Map *HostMapP; + struct Port *PortP; + int work_done = 0; + unsigned long lock_flags, sem_flags; + + rio_dprintk(RIO_DEBUG_TABLE, "Delete entry on host %x, rta %x\n", MapP->HostUniqueNum, MapP->RtaUniqueNum); + + for (host = 0; host < p->RIONumHosts; host++) { + HostP = &p->RIOHosts[host]; + + rio_spin_lock_irqsave(&HostP->HostLock, lock_flags); + + if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { + rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); + continue; + } + + for (entry = 0; entry < MAX_RUP; entry++) { + if (MapP->RtaUniqueNum == HostP->Mapping[entry].RtaUniqueNum) { + HostMapP = &HostP->Mapping[entry]; + rio_dprintk(RIO_DEBUG_TABLE, "Found entry offset %d on host %s\n", entry, HostP->Name); + + /* + ** Check all four links of the unit are disconnected + */ + for (link = 0; link < LINKS_PER_UNIT; link++) { + if (HostMapP->Topology[link].Unit != ROUTE_DISCONNECT) { + rio_dprintk(RIO_DEBUG_TABLE, "Entry is in use and cannot be deleted!\n"); + p->RIOError.Error = UNIT_IS_IN_USE; + rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); + return -EBUSY; + } + } + /* + ** Slot has been allocated, BUT not booted/routed/ + ** connected/selected or anything else-ed + */ + SysPort = HostMapP->SysPort; + + if (SysPort != NO_PORT) { + for (port = SysPort; port < SysPort + PORTS_PER_RTA; port++) { + PortP = p->RIOPortp[port]; + rio_dprintk(RIO_DEBUG_TABLE, "Unmap port\n"); + + rio_spin_lock_irqsave(&PortP->portSem, sem_flags); + + PortP->Mapped = 0; + + if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { + + rio_dprintk(RIO_DEBUG_TABLE, "Gob on port\n"); + PortP->TxBufferIn = PortP->TxBufferOut = 0; + /* What should I do + wakeup( &PortP->TxBufferIn ); + wakeup( &PortP->TxBufferOut); + */ + PortP->InUse = NOT_INUSE; + /* What should I do + wakeup( &PortP->InUse ); + signal(PortP->TtyP->t_pgrp,SIGKILL); + ttyflush(PortP->TtyP,(FREAD|FWRITE)); + */ + PortP->State |= RIO_CLOSING | RIO_DELETED; + } + + /* + ** For the second slot of a 16 port RTA, the + ** driver needs to reset the changes made to + ** the phb to port mappings in RIORouteRup. + */ + if (PortP->SecondBlock) { + u16 dest_unit = HostMapP->ID; + u16 dest_port = port - SysPort; + u16 __iomem *TxPktP; + struct PKT __iomem *Pkt; + + for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) { + /* + ** *TxPktP is the pointer to the + ** transmit packet on the host card. + ** This needs to be translated into + ** a 32 bit pointer so it can be + ** accessed from the driver. + */ + Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&*TxPktP)); + rio_dprintk(RIO_DEBUG_TABLE, "Tx packet (%x) destination: Old %x:%x New %x:%x\n", readw(TxPktP), readb(&Pkt->dest_unit), readb(&Pkt->dest_port), dest_unit, dest_port); + writew(dest_unit, &Pkt->dest_unit); + writew(dest_port, &Pkt->dest_port); + } + rio_dprintk(RIO_DEBUG_TABLE, "Port %d phb destination: Old %x:%x New %x:%x\n", port, readb(&PortP->PhbP->destination) & 0xff, (readb(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port); + writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination); + } + rio_spin_unlock_irqrestore(&PortP->portSem, sem_flags); + } + } + rio_dprintk(RIO_DEBUG_TABLE, "Entry nulled.\n"); + memset(HostMapP, 0, sizeof(struct Map)); + work_done++; + } + } + rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); + } + + /* XXXXX lock me up */ + for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { + if (p->RIOSavedTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) { + memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map)); + work_done++; + } + if (p->RIOConnectTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) { + memset(&p->RIOConnectTable[entry], 0, sizeof(struct Map)); + work_done++; + } + } + if (work_done) + return 0; + + rio_dprintk(RIO_DEBUG_TABLE, "Couldn't find entry to be deleted\n"); + p->RIOError.Error = COULDNT_FIND_ENTRY; + return -ENXIO; +} + +int RIOAssignRta(struct rio_info *p, struct Map *MapP) +{ + int host; + struct Map *HostMapP; + char *sptr; + int link; + + + rio_dprintk(RIO_DEBUG_TABLE, "Assign entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort); + + if ((MapP->ID != (u16) - 1) && ((int) MapP->ID < (int) 1 || (int) MapP->ID > MAX_RUP)) { + rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n"); + p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + if (MapP->RtaUniqueNum == 0) { + rio_dprintk(RIO_DEBUG_TABLE, "Rta Unique number zero!\n"); + p->RIOError.Error = RTA_UNIQUE_NUMBER_ZERO; + return -EINVAL; + } + if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) { + rio_dprintk(RIO_DEBUG_TABLE, "Port %d not multiple of %d!\n", (int) MapP->SysPort, PORTS_PER_RTA); + p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) { + rio_dprintk(RIO_DEBUG_TABLE, "Port %d not valid!\n", (int) MapP->SysPort); + p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + + /* + ** Copy the name across to the map entry. + */ + MapP->Name[MAX_NAME_LEN - 1] = '\0'; + sptr = MapP->Name; + while (*sptr) { + if (*sptr < ' ' || *sptr > '~') { + rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n"); + p->RIOError.Error = BAD_CHARACTER_IN_NAME; + return -EINVAL; + } + sptr++; + } + + for (host = 0; host < p->RIONumHosts; host++) { + if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) { + if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) { + p->RIOError.Error = HOST_NOT_RUNNING; + return -ENXIO; + } + + /* + ** Now we have a host we need to allocate an ID + ** if the entry does not already have one. + */ + if (MapP->ID == (u16) - 1) { + int nNewID; + + rio_dprintk(RIO_DEBUG_TABLE, "Attempting to get a new ID for rta \"%s\"\n", MapP->Name); + /* + ** The idea here is to allow RTA's to be assigned + ** before they actually appear on the network. + ** This allows the addition of RTA's without having + ** to plug them in. + ** What we do is: + ** - Find a free ID and allocate it to the RTA. + ** - If this map entry is the second half of a + ** 16 port entry then find the other half and + ** make sure the 2 cross reference each other. + */ + if (RIOFindFreeID(p, &p->RIOHosts[host], &nNewID, NULL) != 0) { + p->RIOError.Error = COULDNT_FIND_ENTRY; + return -EBUSY; + } + MapP->ID = (u16) nNewID + 1; + rio_dprintk(RIO_DEBUG_TABLE, "Allocated ID %d for this new RTA.\n", MapP->ID); + HostMapP = &p->RIOHosts[host].Mapping[nNewID]; + HostMapP->RtaUniqueNum = MapP->RtaUniqueNum; + HostMapP->HostUniqueNum = MapP->HostUniqueNum; + HostMapP->ID = MapP->ID; + for (link = 0; link < LINKS_PER_UNIT; link++) { + HostMapP->Topology[link].Unit = ROUTE_DISCONNECT; + HostMapP->Topology[link].Link = NO_LINK; + } + if (MapP->Flags & RTA16_SECOND_SLOT) { + int unit; + + for (unit = 0; unit < MAX_RUP; unit++) + if (p->RIOHosts[host].Mapping[unit].RtaUniqueNum == MapP->RtaUniqueNum) + break; + if (unit == MAX_RUP) { + p->RIOError.Error = COULDNT_FIND_ENTRY; + return -EBUSY; + } + HostMapP->Flags |= RTA16_SECOND_SLOT; + HostMapP->ID2 = MapP->ID2 = p->RIOHosts[host].Mapping[unit].ID; + p->RIOHosts[host].Mapping[unit].ID2 = MapP->ID; + rio_dprintk(RIO_DEBUG_TABLE, "Cross referenced id %d to ID %d.\n", MapP->ID, p->RIOHosts[host].Mapping[unit].ID); + } + } + + HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1]; + + if (HostMapP->Flags & SLOT_IN_USE) { + rio_dprintk(RIO_DEBUG_TABLE, "Map table slot for ID %d is already in use.\n", MapP->ID); + p->RIOError.Error = ID_ALREADY_IN_USE; + return -EBUSY; + } + + /* + ** Assign the sys ports and the name, and mark the slot as + ** being in use. + */ + HostMapP->SysPort = MapP->SysPort; + if ((MapP->Flags & RTA16_SECOND_SLOT) == 0) + memcpy(HostMapP->Name, MapP->Name, MAX_NAME_LEN); + HostMapP->Flags = SLOT_IN_USE | RTA_BOOTED; +#ifdef NEED_TO_FIX + RIO_SV_BROADCAST(p->RIOHosts[host].svFlags[MapP->ID - 1]); +#endif + if (MapP->Flags & RTA16_SECOND_SLOT) + HostMapP->Flags |= RTA16_SECOND_SLOT; + + RIOReMapPorts(p, &p->RIOHosts[host], HostMapP); + /* + ** Adjust 2nd block of 8 phbs + */ + if (MapP->Flags & RTA16_SECOND_SLOT) + RIOFixPhbs(p, &p->RIOHosts[host], HostMapP->ID - 1); + + if (HostMapP->SysPort != NO_PORT) { + if (HostMapP->SysPort < p->RIOFirstPortsBooted) + p->RIOFirstPortsBooted = HostMapP->SysPort; + if (HostMapP->SysPort > p->RIOLastPortsBooted) + p->RIOLastPortsBooted = HostMapP->SysPort; + } + if (MapP->Flags & RTA16_SECOND_SLOT) + rio_dprintk(RIO_DEBUG_TABLE, "Second map of RTA %s added to configuration\n", p->RIOHosts[host].Mapping[MapP->ID2 - 1].Name); + else + rio_dprintk(RIO_DEBUG_TABLE, "RTA %s added to configuration\n", MapP->Name); + return 0; + } + } + p->RIOError.Error = UNKNOWN_HOST_NUMBER; + rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum); + return -ENXIO; +} + + +int RIOReMapPorts(struct rio_info *p, struct Host *HostP, struct Map *HostMapP) +{ + struct Port *PortP; + unsigned int SubEnt; + unsigned int HostPort; + unsigned int SysPort; + u16 RtaType; + unsigned long flags; + + rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d to id %d\n", (int) HostMapP->SysPort, HostMapP->ID); + + /* + ** We need to tell the UnixRups which sysport the rup corresponds to + */ + HostP->UnixRups[HostMapP->ID - 1].BaseSysPort = HostMapP->SysPort; + + if (HostMapP->SysPort == NO_PORT) + return (0); + + RtaType = GetUnitType(HostMapP->RtaUniqueNum); + rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d-%d\n", (int) HostMapP->SysPort, (int) HostMapP->SysPort + PORTS_PER_RTA - 1); + + /* + ** now map each of its eight ports + */ + for (SubEnt = 0; SubEnt < PORTS_PER_RTA; SubEnt++) { + rio_dprintk(RIO_DEBUG_TABLE, "subent = %d, HostMapP->SysPort = %d\n", SubEnt, (int) HostMapP->SysPort); + SysPort = HostMapP->SysPort + SubEnt; /* portnumber within system */ + /* portnumber on host */ + + HostPort = (HostMapP->ID - 1) * PORTS_PER_RTA + SubEnt; + + rio_dprintk(RIO_DEBUG_TABLE, "c1 p = %p, p->rioPortp = %p\n", p, p->RIOPortp); + PortP = p->RIOPortp[SysPort]; + rio_dprintk(RIO_DEBUG_TABLE, "Map port\n"); + + /* + ** Point at all the real neat data structures + */ + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->HostP = HostP; + PortP->Caddr = HostP->Caddr; + + /* + ** The PhbP cannot be filled in yet + ** unless the host has been booted + */ + if ((HostP->Flags & RUN_STATE) == RC_RUNNING) { + struct PHB __iomem *PhbP = PortP->PhbP = &HostP->PhbP[HostPort]; + PortP->TxAdd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_add)); + PortP->TxStart = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_start)); + PortP->TxEnd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_end)); + PortP->RxRemove = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_remove)); + PortP->RxStart = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_start)); + PortP->RxEnd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_end)); + } else + PortP->PhbP = NULL; + + /* + ** port related flags + */ + PortP->HostPort = HostPort; + /* + ** For each part of a 16 port RTA, RupNum is ID - 1. + */ + PortP->RupNum = HostMapP->ID - 1; + if (HostMapP->Flags & RTA16_SECOND_SLOT) { + PortP->ID2 = HostMapP->ID2 - 1; + PortP->SecondBlock = 1; + } else { + PortP->ID2 = 0; + PortP->SecondBlock = 0; + } + PortP->RtaUniqueNum = HostMapP->RtaUniqueNum; + + /* + ** If the port was already mapped then thats all we need to do. + */ + if (PortP->Mapped) { + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + continue; + } else + HostMapP->Flags &= ~RTA_NEWBOOT; + + PortP->State = 0; + PortP->Config = 0; + /* + ** Check out the module type - if it is special (read only etc.) + ** then we need to set flags in the PortP->Config. + ** Note: For 16 port RTA, all ports are of the same type. + */ + if (RtaType == TYPE_RTA16) { + PortP->Config |= p->RIOModuleTypes[HostP->UnixRups[HostMapP->ID - 1].ModTypes].Flags[SubEnt % PORTS_PER_MODULE]; + } else { + if (SubEnt < PORTS_PER_MODULE) + PortP->Config |= p->RIOModuleTypes[LONYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE]; + else + PortP->Config |= p->RIOModuleTypes[HINYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE]; + } + + /* + ** more port related flags + */ + PortP->PortState = 0; + PortP->ModemLines = 0; + PortP->ModemState = 0; + PortP->CookMode = COOK_WELL; + PortP->ParamSem = 0; + PortP->FlushCmdBodge = 0; + PortP->WflushFlag = 0; + PortP->MagicFlags = 0; + PortP->Lock = 0; + PortP->Store = 0; + PortP->FirstOpen = 1; + + /* + ** Buffers 'n things + */ + PortP->RxDataStart = 0; + PortP->Cor2Copy = 0; + PortP->Name = &HostMapP->Name[0]; + PortP->statsGather = 0; + PortP->txchars = 0; + PortP->rxchars = 0; + PortP->opens = 0; + PortP->closes = 0; + PortP->ioctls = 0; + if (PortP->TxRingBuffer) + memset(PortP->TxRingBuffer, 0, p->RIOBufferSize); + else if (p->RIOBufferSize) { + PortP->TxRingBuffer = kzalloc(p->RIOBufferSize, GFP_KERNEL); + } + PortP->TxBufferOut = 0; + PortP->TxBufferIn = 0; + PortP->Debug = 0; + /* + ** LastRxTgl stores the state of the rx toggle bit for this + ** port, to be compared with the state of the next pkt received. + ** If the same, we have received the same rx pkt from the RTA + ** twice. Initialise to a value not equal to PHB_RX_TGL or 0. + */ + PortP->LastRxTgl = ~(u8) PHB_RX_TGL; + + /* + ** and mark the port as usable + */ + PortP->Mapped = 1; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + } + if (HostMapP->SysPort < p->RIOFirstPortsMapped) + p->RIOFirstPortsMapped = HostMapP->SysPort; + if (HostMapP->SysPort > p->RIOLastPortsMapped) + p->RIOLastPortsMapped = HostMapP->SysPort; + + return 0; +} + +int RIOChangeName(struct rio_info *p, struct Map *MapP) +{ + int host; + struct Map *HostMapP; + char *sptr; + + rio_dprintk(RIO_DEBUG_TABLE, "Change name entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort); + + if (MapP->ID > MAX_RUP) { + rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n"); + p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; + return -EINVAL; + } + + MapP->Name[MAX_NAME_LEN - 1] = '\0'; + sptr = MapP->Name; + + while (*sptr) { + if (*sptr < ' ' || *sptr > '~') { + rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n"); + p->RIOError.Error = BAD_CHARACTER_IN_NAME; + return -EINVAL; + } + sptr++; + } + + for (host = 0; host < p->RIONumHosts; host++) { + if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) { + if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) { + p->RIOError.Error = HOST_NOT_RUNNING; + return -ENXIO; + } + if (MapP->ID == 0) { + memcpy(p->RIOHosts[host].Name, MapP->Name, MAX_NAME_LEN); + return 0; + } + + HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1]; + + if (HostMapP->RtaUniqueNum != MapP->RtaUniqueNum) { + p->RIOError.Error = RTA_NUMBER_WRONG; + return -ENXIO; + } + memcpy(HostMapP->Name, MapP->Name, MAX_NAME_LEN); + return 0; + } + } + p->RIOError.Error = UNKNOWN_HOST_NUMBER; + rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum); + return -ENXIO; +} diff --git a/drivers/staging/generic_serial/rio/riotty.c b/drivers/staging/generic_serial/rio/riotty.c new file mode 100644 index 000000000000..8a90393faf3c --- /dev/null +++ b/drivers/staging/generic_serial/rio/riotty.c @@ -0,0 +1,654 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : riotty.c +** SID : 1.3 +** Last Modified : 11/6/98 10:33:47 +** Retrieved : 11/6/98 10:33:50 +** +** ident @(#)riotty.c 1.3 +** +** ----------------------------------------------------------------------------- +*/ + +#define __EXPLICIT_DEF_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include + + +#include "linux_compat.h" +#include "rio_linux.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "cmdpkt.h" +#include "map.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "cirrus.h" +#include "rioioctl.h" +#include "param.h" + +static void RIOClearUp(struct Port *PortP); + +/* Below belongs in func.h */ +int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg); + + +extern struct rio_info *p; + + +int riotopen(struct tty_struct *tty, struct file *filp) +{ + unsigned int SysPort; + int repeat_this = 250; + struct Port *PortP; /* pointer to the port structure */ + unsigned long flags; + int retval = 0; + + func_enter(); + + /* Make sure driver_data is NULL in case the rio isn't booted jet. Else gs_close + is going to oops. + */ + tty->driver_data = NULL; + + SysPort = rio_minor(tty); + + if (p->RIOFailed) { + rio_dprintk(RIO_DEBUG_TTY, "System initialisation failed\n"); + func_exit(); + return -ENXIO; + } + + rio_dprintk(RIO_DEBUG_TTY, "port open SysPort %d (mapped:%d)\n", SysPort, p->RIOPortp[SysPort]->Mapped); + + /* + ** Validate that we have received a legitimate request. + ** Currently, just check that we are opening a port on + ** a host card that actually exists, and that the port + ** has been mapped onto a host. + */ + if (SysPort >= RIO_PORTS) { /* out of range ? */ + rio_dprintk(RIO_DEBUG_TTY, "Illegal port number %d\n", SysPort); + func_exit(); + return -ENXIO; + } + + /* + ** Grab pointer to the port stucture + */ + PortP = p->RIOPortp[SysPort]; /* Get control struc */ + rio_dprintk(RIO_DEBUG_TTY, "PortP: %p\n", PortP); + if (!PortP->Mapped) { /* we aren't mapped yet! */ + /* + ** The system doesn't know which RTA this port + ** corresponds to. + */ + rio_dprintk(RIO_DEBUG_TTY, "port not mapped into system\n"); + func_exit(); + return -ENXIO; + } + + tty->driver_data = PortP; + + PortP->gs.port.tty = tty; + PortP->gs.port.count++; + + rio_dprintk(RIO_DEBUG_TTY, "%d bytes in tx buffer\n", PortP->gs.xmit_cnt); + + retval = gs_init_port(&PortP->gs); + if (retval) { + PortP->gs.port.count--; + return -ENXIO; + } + /* + ** If the host hasn't been booted yet, then + ** fail + */ + if ((PortP->HostP->Flags & RUN_STATE) != RC_RUNNING) { + rio_dprintk(RIO_DEBUG_TTY, "Host not running\n"); + func_exit(); + return -ENXIO; + } + + /* + ** If the RTA has not booted yet and the user has choosen to block + ** until the RTA is present then we must spin here waiting for + ** the RTA to boot. + */ + /* I find the above code a bit hairy. I find the below code + easier to read and shorter. Now, if it works too that would + be great... -- REW + */ + rio_dprintk(RIO_DEBUG_TTY, "Checking if RTA has booted... \n"); + while (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)) { + if (!PortP->WaitUntilBooted) { + rio_dprintk(RIO_DEBUG_TTY, "RTA never booted\n"); + func_exit(); + return -ENXIO; + } + + /* Under Linux you'd normally use a wait instead of this + busy-waiting. I'll stick with the old implementation for + now. --REW + */ + if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_TTY, "RTA_wait_for_boot: EINTR in delay \n"); + func_exit(); + return -EINTR; + } + if (repeat_this-- <= 0) { + rio_dprintk(RIO_DEBUG_TTY, "Waiting for RTA to boot timeout\n"); + func_exit(); + return -EIO; + } + } + rio_dprintk(RIO_DEBUG_TTY, "RTA has been booted\n"); + rio_spin_lock_irqsave(&PortP->portSem, flags); + if (p->RIOHalted) { + goto bombout; + } + + /* + ** If the port is in the final throws of being closed, + ** we should wait here (politely), waiting + ** for it to finish, so that it doesn't close us! + */ + while ((PortP->State & RIO_CLOSING) && !p->RIOHalted) { + rio_dprintk(RIO_DEBUG_TTY, "Waiting for RIO_CLOSING to go away\n"); + if (repeat_this-- <= 0) { + rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n"); + RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); + retval = -EINTR; + goto bombout; + } + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { + rio_spin_lock_irqsave(&PortP->portSem, flags); + retval = -EINTR; + goto bombout; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + } + + if (!PortP->Mapped) { + rio_dprintk(RIO_DEBUG_TTY, "Port unmapped while closing!\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + retval = -ENXIO; + func_exit(); + return retval; + } + + if (p->RIOHalted) { + goto bombout; + } + +/* +** 15.10.1998 ARG - ESIL 0761 part fix +** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure, +** we need to make sure that the flags are clear when the port is opened. +*/ + /* Uh? Suppose I turn these on and then another process opens + the port again? The flags get cleared! Not good. -- REW */ + if (!(PortP->State & (RIO_LOPEN | RIO_MOPEN))) { + PortP->Config &= ~(RIO_CTSFLOW | RIO_RTSFLOW); + } + + if (!(PortP->firstOpen)) { /* First time ? */ + rio_dprintk(RIO_DEBUG_TTY, "First open for this port\n"); + + + PortP->firstOpen++; + PortP->CookMode = 0; /* XXX RIOCookMode(tp); */ + PortP->InUse = NOT_INUSE; + + /* Tentative fix for bug PR27. Didn't work. */ + /* PortP->gs.xmit_cnt = 0; */ + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + + /* Someone explain to me why this delay/config is + here. If I read the docs correctly the "open" + command piggybacks the parameters immediately. + -- REW */ + RIOParam(PortP, RIOC_OPEN, 1, OK_TO_SLEEP); /* Open the port */ + rio_spin_lock_irqsave(&PortP->portSem, flags); + + /* + ** wait for the port to be not closed. + */ + while (!(PortP->PortState & PORT_ISOPEN) && !p->RIOHalted) { + rio_dprintk(RIO_DEBUG_TTY, "Waiting for PORT_ISOPEN-currently %x\n", PortP->PortState); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_TTY, "Waiting for open to finish broken by signal\n"); + RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); + func_exit(); + return -EINTR; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + } + + if (p->RIOHalted) { + retval = -EIO; + bombout: + /* RIOClearUp( PortP ); */ + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return retval; + } + rio_dprintk(RIO_DEBUG_TTY, "PORT_ISOPEN found\n"); + } + rio_dprintk(RIO_DEBUG_TTY, "Modem - test for carrier\n"); + /* + ** ACTION + ** insert test for carrier here. -- ??? + ** I already see that test here. What's the deal? -- REW + */ + if ((PortP->gs.port.tty->termios->c_cflag & CLOCAL) || + (PortP->ModemState & RIOC_MSVR1_CD)) { + rio_dprintk(RIO_DEBUG_TTY, "open(%d) Modem carr on\n", SysPort); + /* + tp->tm.c_state |= CARR_ON; + wakeup((caddr_t) &tp->tm.c_canq); + */ + PortP->State |= RIO_CARR_ON; + wake_up_interruptible(&PortP->gs.port.open_wait); + } else { /* no carrier - wait for DCD */ + /* + while (!(PortP->gs.port.tty->termios->c_state & CARR_ON) && + !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted ) + */ + while (!(PortP->State & RIO_CARR_ON) && !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted) { + rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr on\n", SysPort); + /* + PortP->gs.port.tty->termios->c_state |= WOPEN; + */ + PortP->State |= RIO_WOPEN; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { + rio_spin_lock_irqsave(&PortP->portSem, flags); + /* + ** ACTION: verify that this is a good thing + ** to do here. -- ??? + ** I think it's OK. -- REW + */ + rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr broken by signal\n", SysPort); + RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); + /* + tp->tm.c_state &= ~WOPEN; + */ + PortP->State &= ~RIO_WOPEN; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + func_exit(); + return -EINTR; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + } + PortP->State &= ~RIO_WOPEN; + } + if (p->RIOHalted) + goto bombout; + rio_dprintk(RIO_DEBUG_TTY, "Setting RIO_MOPEN\n"); + PortP->State |= RIO_MOPEN; + + if (p->RIOHalted) + goto bombout; + + rio_dprintk(RIO_DEBUG_TTY, "high level open done\n"); + + /* + ** Count opens for port statistics reporting + */ + if (PortP->statsGather) + PortP->opens++; + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + rio_dprintk(RIO_DEBUG_TTY, "Returning from open\n"); + func_exit(); + return 0; +} + +/* +** RIOClose the port. +** The operating system thinks that this is last close for the device. +** As there are two interfaces to the port (Modem and tty), we need to +** check that both are closed before we close the device. +*/ +int riotclose(void *ptr) +{ + struct Port *PortP = ptr; /* pointer to the port structure */ + int deleted = 0; + int try = -1; /* Disable the timeouts by setting them to -1 */ + int repeat_this = -1; /* Congrats to those having 15 years of + uptime! (You get to break the driver.) */ + unsigned long end_time; + struct tty_struct *tty; + unsigned long flags; + int rv = 0; + + rio_dprintk(RIO_DEBUG_TTY, "port close SysPort %d\n", PortP->PortNum); + + /* PortP = p->RIOPortp[SysPort]; */ + rio_dprintk(RIO_DEBUG_TTY, "Port is at address %p\n", PortP); + /* tp = PortP->TtyP; *//* Get tty */ + tty = PortP->gs.port.tty; + rio_dprintk(RIO_DEBUG_TTY, "TTY is at address %p\n", tty); + + if (PortP->gs.closing_wait) + end_time = jiffies + PortP->gs.closing_wait; + else + end_time = jiffies + MAX_SCHEDULE_TIMEOUT; + + rio_spin_lock_irqsave(&PortP->portSem, flags); + + /* + ** Setting this flag will make any process trying to open + ** this port block until we are complete closing it. + */ + PortP->State |= RIO_CLOSING; + + if ((PortP->State & RIO_DELETED)) { + rio_dprintk(RIO_DEBUG_TTY, "Close on deleted RTA\n"); + deleted = 1; + } + + if (p->RIOHalted) { + RIOClearUp(PortP); + rv = -EIO; + goto close_end; + } + + rio_dprintk(RIO_DEBUG_TTY, "Clear bits\n"); + /* + ** clear the open bits for this device + */ + PortP->State &= ~RIO_MOPEN; + PortP->State &= ~RIO_CARR_ON; + PortP->ModemState &= ~RIOC_MSVR1_CD; + /* + ** If the device was open as both a Modem and a tty line + ** then we need to wimp out here, as the port has not really + ** been finally closed (gee, whizz!) The test here uses the + ** bit for the OTHER mode of operation, to see if THAT is + ** still active! + */ + if ((PortP->State & (RIO_LOPEN | RIO_MOPEN))) { + /* + ** The port is still open for the other task - + ** return, pretending that we are still active. + */ + rio_dprintk(RIO_DEBUG_TTY, "Channel %d still open !\n", PortP->PortNum); + PortP->State &= ~RIO_CLOSING; + if (PortP->firstOpen) + PortP->firstOpen--; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return -EIO; + } + + rio_dprintk(RIO_DEBUG_TTY, "Closing down - everything must go!\n"); + + PortP->State &= ~RIO_DYNOROD; + + /* + ** This is where we wait for the port + ** to drain down before closing. Bye-bye.... + ** (We never meant to do this) + */ + rio_dprintk(RIO_DEBUG_TTY, "Timeout 1 starts\n"); + + if (!deleted) + while ((PortP->InUse != NOT_INUSE) && !p->RIOHalted && (PortP->TxBufferIn != PortP->TxBufferOut)) { + if (repeat_this-- <= 0) { + rv = -EINTR; + rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n"); + RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); + goto close_end; + } + rio_dprintk(RIO_DEBUG_TTY, "Calling timeout to flush in closing\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (RIODelay_ni(PortP, HUNDRED_MS * 10) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n"); + rv = -EINTR; + rio_spin_lock_irqsave(&PortP->portSem, flags); + goto close_end; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + } + + PortP->TxBufferIn = PortP->TxBufferOut = 0; + repeat_this = 0xff; + + PortP->InUse = 0; + if ((PortP->State & (RIO_LOPEN | RIO_MOPEN))) { + /* + ** The port has been re-opened for the other task - + ** return, pretending that we are still active. + */ + rio_dprintk(RIO_DEBUG_TTY, "Channel %d re-open!\n", PortP->PortNum); + PortP->State &= ~RIO_CLOSING; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (PortP->firstOpen) + PortP->firstOpen--; + return -EIO; + } + + if (p->RIOHalted) { + RIOClearUp(PortP); + goto close_end; + } + + /* Can't call RIOShortCommand with the port locked. */ + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + + if (RIOShortCommand(p, PortP, RIOC_CLOSE, 1, 0) == RIO_FAIL) { + RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); + rio_spin_lock_irqsave(&PortP->portSem, flags); + goto close_end; + } + + if (!deleted) + while (try && (PortP->PortState & PORT_ISOPEN)) { + try--; + if (time_after(jiffies, end_time)) { + rio_dprintk(RIO_DEBUG_TTY, "Run out of tries - force the bugger shut!\n"); + RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); + break; + } + rio_dprintk(RIO_DEBUG_TTY, "Close: PortState:ISOPEN is %d\n", PortP->PortState & PORT_ISOPEN); + + if (p->RIOHalted) { + RIOClearUp(PortP); + rio_spin_lock_irqsave(&PortP->portSem, flags); + goto close_end; + } + if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { + rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n"); + RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); + break; + } + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + rio_dprintk(RIO_DEBUG_TTY, "Close: try was %d on completion\n", try); + + /* RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); */ + +/* +** 15.10.1998 ARG - ESIL 0761 part fix +** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure,** we need to make sure that the flags are clear when the port is opened. +*/ + PortP->Config &= ~(RIO_CTSFLOW | RIO_RTSFLOW); + + /* + ** Count opens for port statistics reporting + */ + if (PortP->statsGather) + PortP->closes++; + +close_end: + /* XXX: Why would a "DELETED" flag be reset here? I'd have + thought that a "deleted" flag means that the port was + permanently gone, but here we can make it reappear by it + being in close during the "deletion". + */ + PortP->State &= ~(RIO_CLOSING | RIO_DELETED); + if (PortP->firstOpen) + PortP->firstOpen--; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + rio_dprintk(RIO_DEBUG_TTY, "Return from close\n"); + return rv; +} + + + +static void RIOClearUp(struct Port *PortP) +{ + rio_dprintk(RIO_DEBUG_TTY, "RIOHalted set\n"); + PortP->Config = 0; /* Direct semaphore */ + PortP->PortState = 0; + PortP->firstOpen = 0; + PortP->FlushCmdBodge = 0; + PortP->ModemState = PortP->CookMode = 0; + PortP->Mapped = 0; + PortP->WflushFlag = 0; + PortP->MagicFlags = 0; + PortP->RxDataStart = 0; + PortP->TxBufferIn = 0; + PortP->TxBufferOut = 0; +} + +/* +** Put a command onto a port. +** The PortPointer, command, length and arg are passed. +** The len is the length *inclusive* of the command byte, +** and so for a command that takes no data, len==1. +** The arg is a single byte, and is only used if len==2. +** Other values of len aren't allowed, and will cause +** a panic. +*/ +int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg) +{ + struct PKT __iomem *PacketP; + int retries = 20; /* at 10 per second -> 2 seconds */ + unsigned long flags; + + rio_dprintk(RIO_DEBUG_TTY, "entering shortcommand.\n"); + + if (PortP->State & RIO_DELETED) { + rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n"); + return RIO_FAIL; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + + /* + ** If the port is in use for pre-emptive command, then wait for it to + ** be free again. + */ + while ((PortP->InUse != NOT_INUSE) && !p->RIOHalted) { + rio_dprintk(RIO_DEBUG_TTY, "Waiting for not in use (%d)\n", retries); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (retries-- <= 0) { + return RIO_FAIL; + } + if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) { + return RIO_FAIL; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + } + if (PortP->State & RIO_DELETED) { + rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return RIO_FAIL; + } + + while (!can_add_transmit(&PacketP, PortP) && !p->RIOHalted) { + rio_dprintk(RIO_DEBUG_TTY, "Waiting to add short command to queue (%d)\n", retries); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + if (retries-- <= 0) { + rio_dprintk(RIO_DEBUG_TTY, "out of tries. Failing\n"); + return RIO_FAIL; + } + if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) { + return RIO_FAIL; + } + rio_spin_lock_irqsave(&PortP->portSem, flags); + } + + if (p->RIOHalted) { + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return RIO_FAIL; + } + + /* + ** set the command byte and the argument byte + */ + writeb(command, &PacketP->data[0]); + + if (len == 2) + writeb(arg, &PacketP->data[1]); + + /* + ** set the length of the packet and set the command bit. + */ + writeb(PKT_CMD_BIT | len, &PacketP->len); + + add_transmit(PortP); + /* + ** Count characters transmitted for port statistics reporting + */ + if (PortP->statsGather) + PortP->txchars += len; + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + return p->RIOHalted ? RIO_FAIL : ~RIO_FAIL; +} + + diff --git a/drivers/staging/generic_serial/rio/route.h b/drivers/staging/generic_serial/rio/route.h new file mode 100644 index 000000000000..46e963771c30 --- /dev/null +++ b/drivers/staging/generic_serial/rio/route.h @@ -0,0 +1,101 @@ +/**************************************************************************** + ******* ******* + ******* R O U T E H E A D E R + ******* ******* + **************************************************************************** + + Author : Ian Nandhra / Jeremy Rolls + Date : + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- + + ***************************************************************************/ + +#ifndef _route_h +#define _route_h + +#define MAX_LINKS 4 +#define MAX_NODES 17 /* Maximum nodes in a subnet */ +#define NODE_BYTES ((MAX_NODES / 8) + 1) /* Number of bytes needed for + 1 bit per node */ +#define ROUTE_DATA_SIZE (NODE_BYTES + 2) /* Number of bytes for complete + info about cost etc. */ +#define ROUTES_PER_PACKET ((PKT_MAX_DATA_LEN -2)/ ROUTE_DATA_SIZE) + /* Number of nodes we can squeeze + into one packet */ +#define MAX_TOPOLOGY_PACKETS (MAX_NODES / ROUTES_PER_PACKET + 1) +/************************************************ + * Define the types of command for the ROUTE RUP. + ************************************************/ +#define ROUTE_REQUEST 0 /* Request an ID */ +#define ROUTE_FOAD 1 /* Kill the RTA */ +#define ROUTE_ALREADY 2 /* ID given already */ +#define ROUTE_USED 3 /* All ID's used */ +#define ROUTE_ALLOCATE 4 /* Here it is */ +#define ROUTE_REQ_TOP 5 /* I bet you didn't expect.... + the Topological Inquisition */ +#define ROUTE_TOPOLOGY 6 /* Topology request answered FD */ +/******************************************************************* + * Define the Route Map Structure + * + * The route map gives a pointer to a Link Structure to use. + * This allows Disconnected Links to be checked quickly + ******************************************************************/ +typedef struct COST_ROUTE COST_ROUTE; +struct COST_ROUTE { + unsigned char cost; /* Cost down this link */ + unsigned char route[NODE_BYTES]; /* Nodes through this route */ +}; + +typedef struct ROUTE_STR ROUTE_STR; +struct ROUTE_STR { + COST_ROUTE cost_route[MAX_LINKS]; + /* cost / route for this link */ + ushort favoured; /* favoured link */ +}; + + +#define NO_LINK (short) 5 /* Link unattached */ +#define ROUTE_NO_ID (short) 100 /* No Id */ +#define ROUTE_DISCONNECT (ushort) 0xff /* Not connected */ +#define ROUTE_INTERCONNECT (ushort) 0x40 /* Sub-net interconnect */ + + +#define SYNC_RUP (ushort) 255 +#define COMMAND_RUP (ushort) 254 +#define ERROR_RUP (ushort) 253 +#define POLL_RUP (ushort) 252 +#define BOOT_RUP (ushort) 251 +#define ROUTE_RUP (ushort) 250 +#define STATUS_RUP (ushort) 249 +#define POWER_RUP (ushort) 248 + +#define HIGHEST_RUP (ushort) 255 /* Set to Top one */ +#define LOWEST_RUP (ushort) 248 /* Set to bottom one */ + +#endif + +/*********** end of file ***********/ diff --git a/drivers/staging/generic_serial/rio/rup.h b/drivers/staging/generic_serial/rio/rup.h new file mode 100644 index 000000000000..4ae90cb207a9 --- /dev/null +++ b/drivers/staging/generic_serial/rio/rup.h @@ -0,0 +1,69 @@ +/**************************************************************************** + ******* ******* + ******* R U P S T R U C T U R E + ******* ******* + **************************************************************************** + + Author : Ian Nandhra + Date : + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- + + ***************************************************************************/ + +#ifndef _rup_h +#define _rup_h 1 + +#define MAX_RUP ((short) 16) +#define PKTS_PER_RUP ((short) 2) /* They are always used in pairs */ + +/************************************************* + * Define all the packet request stuff + ************************************************/ +#define TX_RUP_INACTIVE 0 /* Nothing to transmit */ +#define TX_PACKET_READY 1 /* Transmit packet ready */ +#define TX_LOCK_RUP 2 /* Transmit side locked */ + +#define RX_RUP_INACTIVE 0 /* Nothing received */ +#define RX_PACKET_READY 1 /* Packet received */ + +#define RUP_NO_OWNER 0xff /* RUP not owned by any process */ + +struct RUP { + u16 txpkt; /* Outgoing packet */ + u16 rxpkt; /* Incoming packet */ + u16 link; /* Which link to send down? */ + u8 rup_dest_unit[2]; /* Destination unit */ + u16 handshake; /* For handshaking */ + u16 timeout; /* Timeout */ + u16 status; /* Status */ + u16 txcontrol; /* Transmit control */ + u16 rxcontrol; /* Receive control */ +}; + +#endif + +/*********** end of file ***********/ diff --git a/drivers/staging/generic_serial/rio/unixrup.h b/drivers/staging/generic_serial/rio/unixrup.h new file mode 100644 index 000000000000..7abf0cba0f2c --- /dev/null +++ b/drivers/staging/generic_serial/rio/unixrup.h @@ -0,0 +1,51 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : unixrup.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:20 +** Retrieved : 11/6/98 11:34:22 +** +** ident @(#)unixrup.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_unixrup_h__ +#define __rio_unixrup_h__ + +/* +** UnixRup data structure. This contains pointers to actual RUPs on the +** host card, and all the command/boot control stuff. +*/ +struct UnixRup { + struct CmdBlk *CmdsWaitingP; /* Commands waiting to be done */ + struct CmdBlk *CmdPendingP; /* The command currently being sent */ + struct RUP __iomem *RupP; /* the Rup to send it to */ + unsigned int Id; /* Id number */ + unsigned int BaseSysPort; /* SysPort of first tty on this RTA */ + unsigned int ModTypes; /* Modules on this RTA */ + spinlock_t RupLock; /* Lock structure for MPX */ + /* struct lockb RupLock; *//* Lock structure for MPX */ +}; + +#endif /* __rio_unixrup_h__ */ diff --git a/drivers/staging/generic_serial/ser_a2232.c b/drivers/staging/generic_serial/ser_a2232.c new file mode 100644 index 000000000000..3f47c2ead8e5 --- /dev/null +++ b/drivers/staging/generic_serial/ser_a2232.c @@ -0,0 +1,831 @@ +/* drivers/char/ser_a2232.c */ + +/* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ + +/* Linux serial driver for the Amiga A2232 board */ + +/* This driver is MAINTAINED. Before applying any changes, please contact + * the author. + */ + +/* Copyright (c) 2000-2001 Enver Haase + * alias The A2232 driver project + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +/***************************** Documentation ************************/ +/* + * This driver is in EXPERIMENTAL state. That means I could not find + * someone with five A2232 boards with 35 ports running at 19200 bps + * at the same time and test the machine's behaviour. + * However, I know that you can performance-tweak this driver (see + * the source code). + * One thing to consider is the time this driver consumes during the + * Amiga's vertical blank interrupt. Everything that is to be done + * _IS DONE_ when entering the vertical blank interrupt handler of + * this driver. + * However, it would be more sane to only do the job for only ONE card + * instead of ALL cards at a time; or, more generally, to handle only + * SOME ports instead of ALL ports at a time. + * However, as long as no-one runs into problems I guess I shouldn't + * change the driver as it runs fine for me :) . + * + * Version history of this file: + * 0.4 Resolved licensing issues. + * 0.3 Inclusion in the Linux/m68k tree, small fixes. + * 0.2 Added documentation, minor typo fixes. + * 0.1 Initial release. + * + * TO DO: + * - Handle incoming BREAK events. I guess "Stevens: Advanced + * Programming in the UNIX(R) Environment" is a good reference + * on what is to be done. + * - When installing as a module, don't simply 'printk' text, but + * send it to the TTY used by the user. + * + * THANKS TO: + * - Jukka Marin (65EC02 code). + * - The other NetBSD developers on whose A2232 driver I had a + * pretty close look. However, I didn't copy any code so it + * is okay to put my code under the GPL and include it into + * Linux. + */ +/***************************** End of Documentation *****************/ + +/***************************** Defines ******************************/ +/* + * Enables experimental 115200 (normal) 230400 (turbo) baud rate. + * The A2232 specification states it can only operate at speeds up to + * 19200 bits per second, and I was not able to send a file via + * "sz"/"rz" and a null-modem cable from one A2232 port to another + * at 115200 bits per second. + * However, this might work for you. + */ +#undef A2232_SPEEDHACK +/* + * Default is not to use RTS/CTS so you could be talked to death. + */ +#define A2232_SUPPRESS_RTSCTS_WARNING +/************************* End of Defines ***************************/ + +/***************************** Includes *****************************/ +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include "ser_a2232.h" +#include "ser_a2232fw.h" +/************************* End of Includes **************************/ + +/***************************** Prototypes ***************************/ +/* The interrupt service routine */ +static irqreturn_t a2232_vbl_inter(int irq, void *data); +/* Initialize the port structures */ +static void a2232_init_portstructs(void); +/* Initialize and register TTY drivers. */ +/* returns 0 IFF successful */ +static int a2232_init_drivers(void); + +/* BEGIN GENERIC_SERIAL PROTOTYPES */ +static void a2232_disable_tx_interrupts(void *ptr); +static void a2232_enable_tx_interrupts(void *ptr); +static void a2232_disable_rx_interrupts(void *ptr); +static void a2232_enable_rx_interrupts(void *ptr); +static int a2232_carrier_raised(struct tty_port *port); +static void a2232_shutdown_port(void *ptr); +static int a2232_set_real_termios(void *ptr); +static int a2232_chars_in_buffer(void *ptr); +static void a2232_close(void *ptr); +static void a2232_hungup(void *ptr); +/* static void a2232_getserial (void *ptr, struct serial_struct *sp); */ +/* END GENERIC_SERIAL PROTOTYPES */ + +/* Functions that the TTY driver struct expects */ +static int a2232_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); +static void a2232_throttle(struct tty_struct *tty); +static void a2232_unthrottle(struct tty_struct *tty); +static int a2232_open(struct tty_struct * tty, struct file * filp); +/************************* End of Prototypes ************************/ + +/***************************** Global variables *********************/ +/*--------------------------------------------------------------------------- + * Interface from generic_serial.c back here + *--------------------------------------------------------------------------*/ +static struct real_driver a2232_real_driver = { + a2232_disable_tx_interrupts, + a2232_enable_tx_interrupts, + a2232_disable_rx_interrupts, + a2232_enable_rx_interrupts, + a2232_shutdown_port, + a2232_set_real_termios, + a2232_chars_in_buffer, + a2232_close, + a2232_hungup, + NULL /* a2232_getserial */ +}; + +static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own. + +/* Ports structs */ +static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES]; + +/* TTY driver structs */ +static struct tty_driver *a2232_driver; + +/* nr of cards completely (all ports) and correctly configured */ +static int nr_a2232; + +/* zorro_dev structs for the A2232's */ +static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS]; +/***************************** End of Global variables **************/ + +/* Helper functions */ + +static inline volatile struct a2232memory *a2232mem(unsigned int board) +{ + return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start); +} + +static inline volatile struct a2232status *a2232stat(unsigned int board, + unsigned int portonboard) +{ + volatile struct a2232memory *mem = a2232mem(board); + return &(mem->Status[portonboard]); +} + +static inline void a2232_receive_char(struct a2232_port *port, int ch, int err) +{ +/* Mostly stolen from other drivers. + Maybe one could implement a more efficient version by not only + transferring one character at a time. +*/ + struct tty_struct *tty = port->gs.port.tty; + +#if 0 + switch(err) { + case TTY_BREAK: + break; + case TTY_PARITY: + break; + case TTY_OVERRUN: + break; + case TTY_FRAME: + break; + } +#endif + + tty_insert_flip_char(tty, ch, err); + tty_flip_buffer_push(tty); +} + +/***************************** Functions ****************************/ +/*** BEGIN OF REAL_DRIVER FUNCTIONS ***/ + +static void a2232_disable_tx_interrupts(void *ptr) +{ + struct a2232_port *port; + volatile struct a2232status *stat; + unsigned long flags; + + port = ptr; + stat = a2232stat(port->which_a2232, port->which_port_on_a2232); + stat->OutDisable = -1; + + /* Does this here really have to be? */ + local_irq_save(flags); + port->gs.port.flags &= ~GS_TX_INTEN; + local_irq_restore(flags); +} + +static void a2232_enable_tx_interrupts(void *ptr) +{ + struct a2232_port *port; + volatile struct a2232status *stat; + unsigned long flags; + + port = ptr; + stat = a2232stat(port->which_a2232, port->which_port_on_a2232); + stat->OutDisable = 0; + + /* Does this here really have to be? */ + local_irq_save(flags); + port->gs.port.flags |= GS_TX_INTEN; + local_irq_restore(flags); +} + +static void a2232_disable_rx_interrupts(void *ptr) +{ + struct a2232_port *port; + port = ptr; + port->disable_rx = -1; +} + +static void a2232_enable_rx_interrupts(void *ptr) +{ + struct a2232_port *port; + port = ptr; + port->disable_rx = 0; +} + +static int a2232_carrier_raised(struct tty_port *port) +{ + struct a2232_port *ap = container_of(port, struct a2232_port, gs.port); + return ap->cd_status; +} + +static void a2232_shutdown_port(void *ptr) +{ + struct a2232_port *port; + volatile struct a2232status *stat; + unsigned long flags; + + port = ptr; + stat = a2232stat(port->which_a2232, port->which_port_on_a2232); + + local_irq_save(flags); + + port->gs.port.flags &= ~GS_ACTIVE; + + if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { + /* Set DTR and RTS to Low, flush output. + The NetBSD driver "msc.c" does it this way. */ + stat->Command = ( (stat->Command & ~A2232CMD_CMask) | + A2232CMD_Close ); + stat->OutFlush = -1; + stat->Setup = -1; + } + + local_irq_restore(flags); + + /* After analyzing control flow, I think a2232_shutdown_port + is actually the last call from the system when at application + level someone issues a "echo Hello >>/dev/ttyY0". + Therefore I think the MOD_DEC_USE_COUNT should be here and + not in "a2232_close()". See the comment in "sx.c", too. + If you run into problems, compile this driver into the + kernel instead of compiling it as a module. */ +} + +static int a2232_set_real_termios(void *ptr) +{ + unsigned int cflag, baud, chsize, stopb, parity, softflow; + int rate; + int a2232_param, a2232_cmd; + unsigned long flags; + unsigned int i; + struct a2232_port *port = ptr; + volatile struct a2232status *status; + volatile struct a2232memory *mem; + + if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; + + status = a2232stat(port->which_a2232, port->which_port_on_a2232); + mem = a2232mem(port->which_a2232); + + a2232_param = a2232_cmd = 0; + + // get baud rate + baud = port->gs.baud; + if (baud == 0) { + /* speed == 0 -> drop DTR, do nothing else */ + local_irq_save(flags); + // Clear DTR (and RTS... mhhh). + status->Command = ( (status->Command & ~A2232CMD_CMask) | + A2232CMD_Close ); + status->OutFlush = -1; + status->Setup = -1; + + local_irq_restore(flags); + return 0; + } + + rate = A2232_BAUD_TABLE_NOAVAIL; + for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){ + if (a2232_baud_table[i] == baud){ + if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2]; + else rate = a2232_baud_table[i+1]; + } + } + if (rate == A2232_BAUD_TABLE_NOAVAIL){ + printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud); + // This is useful for both (turbo or normal) Crystal versions. + rate = A2232PARAM_B9600; + } + a2232_param |= rate; + + cflag = port->gs.port.tty->termios->c_cflag; + + // get character size + chsize = cflag & CSIZE; + switch (chsize){ + case CS8: a2232_param |= A2232PARAM_8Bit; break; + case CS7: a2232_param |= A2232PARAM_7Bit; break; + case CS6: a2232_param |= A2232PARAM_6Bit; break; + case CS5: a2232_param |= A2232PARAM_5Bit; break; + default: printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n", + port->which_a2232,port->which_port_on_a2232,chsize); + a2232_param |= A2232PARAM_8Bit; break; + } + + // get number of stop bits + stopb = cflag & CSTOPB; + if (stopb){ // two stop bits instead of one + printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n", + port->which_a2232,port->which_port_on_a2232); + } + + // Warn if RTS/CTS not wanted + if (!(cflag & CRTSCTS)){ +#ifndef A2232_SUPPRESS_RTSCTS_WARNING + printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n", + port->which_a2232,port->which_port_on_a2232); +#endif + } + + /* I think this is correct. + However, IXOFF means _input_ flow control and I wonder + if one should care about IXON _output_ flow control, + too. If this makes problems, one should turn the A2232 + firmware XON/XOFF "SoftFlow" flow control off and use + the conventional way of inserting START/STOP characters + by hand in throttle()/unthrottle(). + */ + softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF ); + + // get Parity (Enabled/Disabled? If Enabled, Odd or Even?) + parity = cflag & (PARENB | PARODD); + if (parity & PARENB){ + if (parity & PARODD){ + a2232_cmd |= A2232CMD_OddParity; + } + else{ + a2232_cmd |= A2232CMD_EvenParity; + } + } + else a2232_cmd |= A2232CMD_NoParity; + + + /* Hmm. Maybe an own a2232_port structure + member would be cleaner? */ + if (cflag & CLOCAL) + port->gs.port.flags &= ~ASYNC_CHECK_CD; + else + port->gs.port.flags |= ASYNC_CHECK_CD; + + + /* Now we have all parameters and can go to set them: */ + local_irq_save(flags); + + status->Param = a2232_param | A2232PARAM_RcvBaud; + status->Command = a2232_cmd | A2232CMD_Open | A2232CMD_Enable; + status->SoftFlow = softflow; + status->OutDisable = 0; + status->Setup = -1; + + local_irq_restore(flags); + return 0; +} + +static int a2232_chars_in_buffer(void *ptr) +{ + struct a2232_port *port; + volatile struct a2232status *status; + unsigned char ret; /* we need modulo-256 arithmetics */ + port = ptr; + status = a2232stat(port->which_a2232, port->which_port_on_a2232); +#if A2232_IOBUFLEN != 256 +#error "Re-Implement a2232_chars_in_buffer()!" +#endif + ret = (status->OutHead - status->OutTail); + return ret; +} + +static void a2232_close(void *ptr) +{ + a2232_disable_tx_interrupts(ptr); + a2232_disable_rx_interrupts(ptr); + /* see the comment in a2232_shutdown_port above. */ +} + +static void a2232_hungup(void *ptr) +{ + a2232_close(ptr); +} +/*** END OF REAL_DRIVER FUNCTIONS ***/ + +/*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ +static int a2232_ioctl( struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +static void a2232_throttle(struct tty_struct *tty) +{ +/* Throttle: System cannot take another chars: Drop RTS or + send the STOP char or whatever. + The A2232 firmware does RTS/CTS anyway, and XON/XOFF + if switched on. So the only thing we can do at this + layer here is not taking any characters out of the + A2232 buffer any more. */ + struct a2232_port *port = tty->driver_data; + port->throttle_input = -1; +} + +static void a2232_unthrottle(struct tty_struct *tty) +{ +/* Unthrottle: dual to "throttle()" above. */ + struct a2232_port *port = tty->driver_data; + port->throttle_input = 0; +} + +static int a2232_open(struct tty_struct * tty, struct file * filp) +{ +/* More or less stolen from other drivers. */ + int line; + int retval; + struct a2232_port *port; + + line = tty->index; + port = &a2232_ports[line]; + + tty->driver_data = port; + port->gs.port.tty = tty; + port->gs.port.count++; + retval = gs_init_port(&port->gs); + if (retval) { + port->gs.port.count--; + return retval; + } + port->gs.port.flags |= GS_ACTIVE; + retval = gs_block_til_ready(port, filp); + + if (retval) { + port->gs.port.count--; + return retval; + } + + a2232_enable_rx_interrupts(port); + + return 0; +} +/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ + +static irqreturn_t a2232_vbl_inter(int irq, void *data) +{ +#if A2232_IOBUFLEN != 256 +#error "Re-Implement a2232_vbl_inter()!" +#endif + +struct a2232_port *port; +volatile struct a2232memory *mem; +volatile struct a2232status *status; +unsigned char newhead; +unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */ +unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */ +volatile u_char *ibuf, *cbuf, *obuf; +int ch, err, n, p; + for (n = 0; n < nr_a2232; n++){ /* for every completely initialized A2232 board */ + mem = a2232mem(n); + for (p = 0; p < NUMLINES; p++){ /* for every port on this board */ + err = 0; + port = &a2232_ports[n*NUMLINES+p]; + if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */ + + status = a2232stat(n,p); + + if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */ + newhead = status->InHead; /* 65EC02 write pointer */ + bufpos = status->InTail; + + /* check for input for this port */ + if (newhead != bufpos) { + /* buffer for input chars/events */ + ibuf = mem->InBuf[p]; + + /* data types of bytes in ibuf */ + cbuf = mem->InCtl[p]; + + /* do for all chars */ + while (bufpos != newhead) { + /* which type of input data? */ + switch (cbuf[bufpos]) { + /* switch on input event (CD, BREAK, etc.) */ + case A2232INCTL_EVENT: + switch (ibuf[bufpos++]) { + case A2232EVENT_Break: + /* TODO: Handle BREAK signal */ + break; + /* A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are + handled in a separate queue and should not occur here. */ + case A2232EVENT_Sync: + printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring."); + break; + default: + printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]); + } /* event type switch */ + break; + case A2232INCTL_CHAR: + /* Receive incoming char */ + a2232_receive_char(port, ibuf[bufpos], err); + bufpos++; + break; + default: + printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]); + bufpos++; + } /* switch on input data type */ + } /* while there's something in the buffer */ + + status->InTail = bufpos; /* tell 65EC02 what we've read */ + + } /* if there was something in the buffer */ + } /* If input is not disabled */ + + /* Now check if there's something to output */ + obuf = mem->OutBuf[p]; + bufpos = status->OutHead; + while ( (port->gs.xmit_cnt > 0) && + (!port->gs.port.tty->stopped) && + (!port->gs.port.tty->hw_stopped) ){ /* While there are chars to transmit */ + if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */ + ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */ + port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */ + obuf[bufpos++] = ch; /* put it into the A2232 buffer */ + port->gs.xmit_cnt--; + } + else{ /* If A2232 the buffer is full */ + break; /* simply stop filling it. */ + } + } + status->OutHead = bufpos; + + /* WakeUp if output buffer runs low */ + if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { + tty_wakeup(port->gs.port.tty); + } + } // if the port is used + } // for every port on the board + + /* Now check the CD message queue */ + newhead = mem->Common.CDHead; + bufpos = mem->Common.CDTail; + if (newhead != bufpos){ /* There are CD events in queue */ + ocd = mem->Common.CDStatus; /* get old status bits */ + while (newhead != bufpos){ /* read all events */ + ncd = mem->CDBuf[bufpos++]; /* get one event */ + ccd = ncd ^ ocd; /* mask of changed lines */ + ocd = ncd; /* save new status bits */ + for(p=0; p < NUMLINES; p++){ /* for all ports */ + if (ccd & 1){ /* this one changed */ + + struct a2232_port *port = &a2232_ports[n*7+p]; + port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */ + + if (!(port->gs.port.flags & ASYNC_CHECK_CD)) + ; /* Don't report DCD changes */ + else if (port->cd_status) { // if DCD on: DCD went UP! + + /* Are we blocking in open?*/ + wake_up_interruptible(&port->gs.port.open_wait); + } + else { // if DCD off: DCD went DOWN! + if (port->gs.port.tty) + tty_hangup (port->gs.port.tty); + } + + } // if CD changed for this port + ccd >>= 1; + ncd >>= 1; /* Shift bits for next line */ + } // for every port + } // while CD events in queue + mem->Common.CDStatus = ocd; /* save new status */ + mem->Common.CDTail = bufpos; /* remove events */ + } // if events in CD queue + + } // for every completely initialized A2232 board + return IRQ_HANDLED; +} + +static const struct tty_port_operations a2232_port_ops = { + .carrier_raised = a2232_carrier_raised, +}; + +static void a2232_init_portstructs(void) +{ + struct a2232_port *port; + int i; + + for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { + port = a2232_ports + i; + tty_port_init(&port->gs.port); + port->gs.port.ops = &a2232_port_ops; + port->which_a2232 = i/NUMLINES; + port->which_port_on_a2232 = i%NUMLINES; + port->disable_rx = port->throttle_input = port->cd_status = 0; + port->gs.magic = A2232_MAGIC; + port->gs.close_delay = HZ/2; + port->gs.closing_wait = 30 * HZ; + port->gs.rd = &a2232_real_driver; + } +} + +static const struct tty_operations a2232_ops = { + .open = a2232_open, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .chars_in_buffer = gs_chars_in_buffer, + .flush_buffer = gs_flush_buffer, + .ioctl = a2232_ioctl, + .throttle = a2232_throttle, + .unthrottle = a2232_unthrottle, + .set_termios = gs_set_termios, + .stop = gs_stop, + .start = gs_start, + .hangup = gs_hangup, +}; + +static int a2232_init_drivers(void) +{ + int error; + + a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232); + if (!a2232_driver) + return -ENOMEM; + a2232_driver->owner = THIS_MODULE; + a2232_driver->driver_name = "commodore_a2232"; + a2232_driver->name = "ttyY"; + a2232_driver->major = A2232_NORMAL_MAJOR; + a2232_driver->type = TTY_DRIVER_TYPE_SERIAL; + a2232_driver->subtype = SERIAL_TYPE_NORMAL; + a2232_driver->init_termios = tty_std_termios; + a2232_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + a2232_driver->init_termios.c_ispeed = 9600; + a2232_driver->init_termios.c_ospeed = 9600; + a2232_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(a2232_driver, &a2232_ops); + if ((error = tty_register_driver(a2232_driver))) { + printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n", + error); + put_tty_driver(a2232_driver); + return 1; + } + return 0; +} + +static int __init a2232board_init(void) +{ + struct zorro_dev *z; + + unsigned int boardaddr; + int bcount; + short start; + u_char *from; + volatile u_char *to; + volatile struct a2232memory *mem; + int error, i; + +#ifdef CONFIG_SMP + return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */ +#endif + + if (!MACH_IS_AMIGA){ + return -ENODEV; + } + + printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */ + + z = NULL; + nr_a2232 = 0; + while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){ + if ( (z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) && + (z->id != ZORRO_PROD_CBM_A2232) ){ + continue; // The board found was no A2232 + } + if (!zorro_request_device(z,"A2232 driver")) + continue; + + printk("Commodore A2232 found (#%d).\n",nr_a2232); + + zd_a2232[nr_a2232] = z; + + boardaddr = ZTWO_VADDR( z->resource.start ); + printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start))); + + mem = (volatile struct a2232memory *) boardaddr; + + (void) mem->Enable6502Reset; /* copy the code across to the board */ + to = (u_char *)mem; from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2; + start = *(short *)from; + from += sizeof(start); + to += start; + while(bcount--) *to++ = *from++; + printk("65EC02 software uploaded to the A2232 memory.\n"); + + mem->Common.Crystal = A2232_UNKNOWN; /* use automatic speed check */ + + /* start 6502 running */ + (void) mem->ResetBoard; + printk("A2232's 65EC02 CPU up and running.\n"); + + /* wait until speed detector has finished */ + for (bcount = 0; bcount < 2000; bcount++) { + udelay(1000); + if (mem->Common.Crystal) + break; + } + printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: ")); + switch (mem->Common.Crystal){ + case A2232_UNKNOWN: + printk("Unknown crystal.\n"); + break; + case A2232_NORMAL: + printk ("Normal crystal.\n"); + break; + case A2232_TURBO: + printk ("Turbo crystal.\n"); + break; + default: + printk ("0x%x. Huh?\n",mem->Common.Crystal); + } + + nr_a2232++; + + } + + printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */ + + a2232_init_portstructs(); + + /* + a2232_init_drivers also registers the drivers. Must be here because all boards + have to be detected first. + */ + if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx? + + error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, + "A2232 serial VBL", a2232_driver_ID); + if (error) { + for (i = 0; i < nr_a2232; i++) + zorro_release_device(zd_a2232[i]); + tty_unregister_driver(a2232_driver); + put_tty_driver(a2232_driver); + } + return error; +} + +static void __exit a2232board_exit(void) +{ + int i; + + for (i = 0; i < nr_a2232; i++) { + zorro_release_device(zd_a2232[i]); + } + + tty_unregister_driver(a2232_driver); + put_tty_driver(a2232_driver); + free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID); +} + +module_init(a2232board_init); +module_exit(a2232board_exit); + +MODULE_AUTHOR("Enver Haase"); +MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/generic_serial/ser_a2232.h b/drivers/staging/generic_serial/ser_a2232.h new file mode 100644 index 000000000000..bc09eb9e118b --- /dev/null +++ b/drivers/staging/generic_serial/ser_a2232.h @@ -0,0 +1,202 @@ +/* drivers/char/ser_a2232.h */ + +/* $Id: ser_a2232.h,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ + +/* Linux serial driver for the Amiga A2232 board */ + +/* This driver is MAINTAINED. Before applying any changes, please contact + * the author. + */ + +/* Copyright (c) 2000-2001 Enver Haase + * alias The A2232 driver project + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _SER_A2232_H_ +#define _SER_A2232_H_ + +/* + How many boards are to be supported at maximum; + "up to five A2232 Multiport Serial Cards may be installed in a + single Amiga 2000" states the A2232 User's Guide. If you have + more slots available, you might want to change the value below. +*/ +#define MAX_A2232_BOARDS 5 + +#ifndef A2232_NORMAL_MAJOR +/* This allows overriding on the compiler commandline, or in a "major.h" + include or something like that */ +#define A2232_NORMAL_MAJOR 224 /* /dev/ttyY* */ +#define A2232_CALLOUT_MAJOR 225 /* /dev/cuy* */ +#endif + +/* Some magic is always good - Who knows :) */ +#define A2232_MAGIC 0x000a2232 + +/* A2232 port structure to keep track of the + status of every single line used */ +struct a2232_port{ + struct gs_port gs; + unsigned int which_a2232; + unsigned int which_port_on_a2232; + short disable_rx; + short throttle_input; + short cd_status; +}; + +#define NUMLINES 7 /* number of lines per board */ +#define A2232_IOBUFLEN 256 /* number of bytes per buffer */ +#define A2232_IOBUFLENMASK 0xff /* mask for maximum number of bytes */ + + +#define A2232_UNKNOWN 0 /* crystal not known */ +#define A2232_NORMAL 1 /* normal A2232 (1.8432 MHz oscillator) */ +#define A2232_TURBO 2 /* turbo A2232 (3.6864 MHz oscillator) */ + + +struct a2232common { + char Crystal; /* normal (1) or turbo (2) board? */ + u_char Pad_a; + u_char TimerH; /* timer value after speed check */ + u_char TimerL; + u_char CDHead; /* head pointer for CD message queue */ + u_char CDTail; /* tail pointer for CD message queue */ + u_char CDStatus; + u_char Pad_b; +}; + +struct a2232status { + u_char InHead; /* input queue head */ + u_char InTail; /* input queue tail */ + u_char OutDisable; /* disables output */ + u_char OutHead; /* output queue head */ + u_char OutTail; /* output queue tail */ + u_char OutCtrl; /* soft flow control character to send */ + u_char OutFlush; /* flushes output buffer */ + u_char Setup; /* causes reconfiguration */ + u_char Param; /* parameter byte - see A2232PARAM */ + u_char Command; /* command byte - see A2232CMD */ + u_char SoftFlow; /* enables xon/xoff flow control */ + /* private 65EC02 fields: */ + u_char XonOff; /* stores XON/XOFF enable/disable */ +}; + +#define A2232_MEMPAD1 \ + (0x0200 - NUMLINES * sizeof(struct a2232status) - \ + sizeof(struct a2232common)) +#define A2232_MEMPAD2 (0x2000 - NUMLINES * A2232_IOBUFLEN - A2232_IOBUFLEN) + +struct a2232memory { + struct a2232status Status[NUMLINES]; /* 0x0000-0x006f status areas */ + struct a2232common Common; /* 0x0070-0x0077 common flags */ + u_char Dummy1[A2232_MEMPAD1]; /* 0x00XX-0x01ff */ + u_char OutBuf[NUMLINES][A2232_IOBUFLEN];/* 0x0200-0x08ff output bufs */ + u_char InBuf[NUMLINES][A2232_IOBUFLEN]; /* 0x0900-0x0fff input bufs */ + u_char InCtl[NUMLINES][A2232_IOBUFLEN]; /* 0x1000-0x16ff control data */ + u_char CDBuf[A2232_IOBUFLEN]; /* 0x1700-0x17ff CD event buffer */ + u_char Dummy2[A2232_MEMPAD2]; /* 0x1800-0x2fff */ + u_char Code[0x1000]; /* 0x3000-0x3fff code area */ + u_short InterruptAck; /* 0x4000 intr ack */ + u_char Dummy3[0x3ffe]; /* 0x4002-0x7fff */ + u_short Enable6502Reset; /* 0x8000 Stop board, */ + /* 6502 RESET line held low */ + u_char Dummy4[0x3ffe]; /* 0x8002-0xbfff */ + u_short ResetBoard; /* 0xc000 reset board & run, */ + /* 6502 RESET line held high */ +}; + +#undef A2232_MEMPAD1 +#undef A2232_MEMPAD2 + +#define A2232INCTL_CHAR 0 /* corresponding byte in InBuf is a character */ +#define A2232INCTL_EVENT 1 /* corresponding byte in InBuf is an event */ + +#define A2232EVENT_Break 1 /* break set */ +#define A2232EVENT_CarrierOn 2 /* carrier raised */ +#define A2232EVENT_CarrierOff 3 /* carrier dropped */ +#define A2232EVENT_Sync 4 /* don't know, defined in 2232.ax */ + +#define A2232CMD_Enable 0x1 /* enable/DTR bit */ +#define A2232CMD_Close 0x2 /* close the device */ +#define A2232CMD_Open 0xb /* open the device */ +#define A2232CMD_CMask 0xf /* command mask */ +#define A2232CMD_RTSOff 0x0 /* turn off RTS */ +#define A2232CMD_RTSOn 0x8 /* turn on RTS */ +#define A2232CMD_Break 0xd /* transmit a break */ +#define A2232CMD_RTSMask 0xc /* mask for RTS stuff */ +#define A2232CMD_NoParity 0x00 /* don't use parity */ +#define A2232CMD_OddParity 0x20 /* odd parity */ +#define A2232CMD_EvenParity 0x60 /* even parity */ +#define A2232CMD_ParityMask 0xe0 /* parity mask */ + +#define A2232PARAM_B115200 0x0 /* baud rates */ +#define A2232PARAM_B50 0x1 +#define A2232PARAM_B75 0x2 +#define A2232PARAM_B110 0x3 +#define A2232PARAM_B134 0x4 +#define A2232PARAM_B150 0x5 +#define A2232PARAM_B300 0x6 +#define A2232PARAM_B600 0x7 +#define A2232PARAM_B1200 0x8 +#define A2232PARAM_B1800 0x9 +#define A2232PARAM_B2400 0xa +#define A2232PARAM_B3600 0xb +#define A2232PARAM_B4800 0xc +#define A2232PARAM_B7200 0xd +#define A2232PARAM_B9600 0xe +#define A2232PARAM_B19200 0xf +#define A2232PARAM_BaudMask 0xf /* baud rate mask */ +#define A2232PARAM_RcvBaud 0x10 /* enable receive baud rate */ +#define A2232PARAM_8Bit 0x00 /* numbers of bits */ +#define A2232PARAM_7Bit 0x20 +#define A2232PARAM_6Bit 0x40 +#define A2232PARAM_5Bit 0x60 +#define A2232PARAM_BitMask 0x60 /* numbers of bits mask */ + + +/* Standard speeds tables, -1 means unavailable, -2 means 0 baud: switch off line */ +#define A2232_BAUD_TABLE_NOAVAIL -1 +#define A2232_BAUD_TABLE_NUM_RATES (18) +static int a2232_baud_table[A2232_BAUD_TABLE_NUM_RATES*3] = { + //Baud //Normal //Turbo + 50, A2232PARAM_B50, A2232_BAUD_TABLE_NOAVAIL, + 75, A2232PARAM_B75, A2232_BAUD_TABLE_NOAVAIL, + 110, A2232PARAM_B110, A2232_BAUD_TABLE_NOAVAIL, + 134, A2232PARAM_B134, A2232_BAUD_TABLE_NOAVAIL, + 150, A2232PARAM_B150, A2232PARAM_B75, + 200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, + 300, A2232PARAM_B300, A2232PARAM_B150, + 600, A2232PARAM_B600, A2232PARAM_B300, + 1200, A2232PARAM_B1200, A2232PARAM_B600, + 1800, A2232PARAM_B1800, A2232_BAUD_TABLE_NOAVAIL, + 2400, A2232PARAM_B2400, A2232PARAM_B1200, + 4800, A2232PARAM_B4800, A2232PARAM_B2400, + 9600, A2232PARAM_B9600, A2232PARAM_B4800, + 19200, A2232PARAM_B19200, A2232PARAM_B9600, + 38400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B19200, + 57600, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, +#ifdef A2232_SPEEDHACK + 115200, A2232PARAM_B115200, A2232_BAUD_TABLE_NOAVAIL, + 230400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B115200 +#else + 115200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, + 230400, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL +#endif +}; +#endif diff --git a/drivers/staging/generic_serial/ser_a2232fw.ax b/drivers/staging/generic_serial/ser_a2232fw.ax new file mode 100644 index 000000000000..736438032768 --- /dev/null +++ b/drivers/staging/generic_serial/ser_a2232fw.ax @@ -0,0 +1,529 @@ +;.lib "axm" +; +;begin +;title "A2232 serial board driver" +; +;set modules "2232" +;set executable "2232.bin" +; +;;;;set nolink +; +;set temporary directory "t:" +; +;set assembly options "-m6502 -l60:t:list" +;set link options "bin"; loadadr" +;;;bin2c 2232.bin msc6502.h msc6502code +;end +; +; +; ### Commodore A2232 serial board driver for NetBSD by JM v1.3 ### +; +; - Created 950501 by JM - +; +; +; Serial board driver software. +; +; +% Copyright (c) 1995 Jukka Marin . +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions +% are met: +% 1. Redistributions of source code must retain the above copyright +% notice, and the entire permission notice in its entirety, +% including the disclaimer of warranties. +% 2. Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% 3. The name of the author may not be used to endorse or promote +% products derived from this software without specific prior +% written permission. +% +% ALTERNATIVELY, this product may be distributed under the terms of +% the GNU General Public License, in which case the provisions of the +% GPL are required INSTEAD OF the above restrictions. (This clause is +% necessary due to a potential bad interaction between the GPL and +% the restrictions contained in a BSD-style copyright.) +% +% THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED +% WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +% OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +% DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, +% INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +% (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +% SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +% HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +% STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED +% OF THE POSSIBILITY OF SUCH DAMAGE. +; +; +; Bugs: +; +; - Can't send a break yet +; +; +; +; Edited: +; +; - 950501 by JM -> v0.1 - Created this file. +; - 951029 by JM -> v1.3 - Carrier Detect events now queued in a separate +; queue. +; +; + + +CODE equ $3800 ; start address for program code + + +CTL_CHAR equ $00 ; byte in ibuf is a character +CTL_EVENT equ $01 ; byte in ibuf is an event + +EVENT_BREAK equ $01 +EVENT_CDON equ $02 +EVENT_CDOFF equ $03 +EVENT_SYNC equ $04 + +XON equ $11 +XOFF equ $13 + + +VARBASE macro *starting_address ; was VARINIT +_varbase set \1 + endm + +VARDEF macro *name space_needs +\1 equ _varbase +_varbase set _varbase+\2 + endm + + +stz macro * address + db $64,\1 + endm + +stzax macro * address + db $9e,<\1,>\1 + endm + + +biti macro * immediate value + db $89,\1 + endm + +smb0 macro * address + db $87,\1 + endm +smb1 macro * address + db $97,\1 + endm +smb2 macro * address + db $a7,\1 + endm +smb3 macro * address + db $b7,\1 + endm +smb4 macro * address + db $c7,\1 + endm +smb5 macro * address + db $d7,\1 + endm +smb6 macro * address + db $e7,\1 + endm +smb7 macro * address + db $f7,\1 + endm + + + +;-----------------------------------------------------------------------; +; ; +; stuff common for all ports, non-critical (run once / loop) ; +; ; +DO_SLOW macro * port_number ; + .local ; ; + lda CIA+C_PA ; check all CD inputs ; + cmp CommonCDo ; changed from previous accptd? ; + beq =over ; nope, do nothing else here ; + ; ; + cmp CommonCDb ; bouncing? ; + beq =nobounce ; nope -> ; + ; ; + sta CommonCDb ; save current state ; + lda #64 ; reinitialize counter ; + sta CommonCDc ; ; + jmp =over ; skip CD save ; + ; ; +=nobounce dec CommonCDc ; no, decrement bounce counter ; + bpl =over ; not done yet, so skip CD save ; + ; ; +=saveCD ldx CDHead ; get write index ; + sta cdbuf,x ; save status in buffer ; + inx ; ; + cpx CDTail ; buffer full? ; + .if ne ; no: preserve status: ; + stx CDHead ; update index in RAM ; + sta CommonCDo ; save state for the next check ; + .end ; ; +=over .end local ; + endm ; + ; +;-----------------------------------------------------------------------; + + +; port specific stuff (no data transfer) + +DO_PORT macro * port_number + .local ; ; + lda SetUp\1 ; reconfiguration request? ; + .if ne ; yes: ; + lda SoftFlow\1 ; get XON/XOFF flag ; + sta XonOff\1 ; save it ; + lda Param\1 ; get parameter ; + ora #%00010000 ; use baud generator for Rx ; + sta ACIA\1+A_CTRL ; store in control register ; + stz OutDisable\1 ; enable transmit output ; + stz SetUp\1 ; no reconfiguration no more ; + .end ; ; + ; ; + lda InHead\1 ; get write index ; + sbc InTail\1 ; buffer full soon? ; + cmp #200 ; 200 chars or more in buffer? ; + lda Command\1 ; get Command reg value ; + and #%11110011 ; turn RTS OFF by default ; + .if cc ; still room in buffer: ; + ora #%00001000 ; turn RTS ON ; + .end ; ; + sta ACIA\1+A_CMD ; set/clear RTS ; + ; ; + lda OutFlush\1 ; request to flush output buffer; + .if ne ; yessh! ; + lda OutHead\1 ; get head ; + sta OutTail\1 ; save as tail ; + stz OutDisable\1 ; enable transmit output ; + stz OutFlush\1 ; clear request ; + .end + .end local + endm + + +DO_DATA macro * port number + .local + lda ACIA\1+A_SR ; read ACIA status register ; + biti [1<<3] ; something received? ; + .if ne ; yes: ; + biti [1<<1] ; framing error? ; + .if ne ; yes: ; + lda ACIA\1+A_DATA ; read received character ; + bne =SEND ; not break -> ignore it ; + ldx InHead\1 ; get write pointer ; + lda #CTL_EVENT ; get type of byte ; + sta ictl\1,x ; save it in InCtl buffer ; + lda #EVENT_BREAK ; event code ; + sta ibuf\1,x ; save it as well ; + inx ; ; + cpx InTail\1 ; still room in buffer? ; + .if ne ; absolutely: ; + stx InHead\1 ; update index in memory ; + .end ; ; + jmp =SEND ; go check if anything to send ; + .end ; ; + ; normal char received: ; + ldx InHead\1 ; get write index ; + lda ACIA\1+A_DATA ; read received character ; + sta ibuf\1,x ; save char in buffer ; + stzax ictl\1 ; set type to CTL_CHAR ; + inx ; ; + cpx InTail\1 ; buffer full? ; + .if ne ; no: preserve character: ; + stx InHead\1 ; update index in RAM ; + .end ; ; + and #$7f ; mask off parity if any ; + cmp #XOFF ; XOFF from remote host? ; + .if eq ; yes: ; + lda XonOff\1 ; if XON/XOFF handshaking.. ; + sta OutDisable\1 ; ..disable transmitter ; + .end ; ; + .end ; ; + ; ; + ; BUFFER FULL CHECK WAS HERE ; + ; ; +=SEND lda ACIA\1+A_SR ; transmit register empty? ; + and #[1<<4] ; ; + .if ne ; yes: ; + ldx OutCtrl\1 ; sending out XON/XOFF? ; + .if ne ; yes: ; + lda CIA+C_PB ; check CTS signal ; + and #[1<<\1] ; (for this port only) ; + bne =DONE ; not allowed to send -> done ; + stx ACIA\1+A_DATA ; transmit control char ; + stz OutCtrl\1 ; clear flag ; + jmp =DONE ; and we're done ; + .end ; ; + ; ; + ldx OutTail\1 ; anything to transmit? ; + cpx OutHead\1 ; ; + .if ne ; yes: ; + lda OutDisable\1 ; allowed to transmit? ; + .if eq ; yes: ; + lda CIA+C_PB ; check CTS signal ; + and #[1<<\1] ; (for this port only) ; + bne =DONE ; not allowed to send -> done ; + lda obuf\1,x ; get a char from buffer ; + sta ACIA\1+A_DATA ; send it away ; + inc OutTail\1 ; update read index ; + .end ; ; + .end ; ; + .end ; ; +=DONE .end local + endm + + + +PORTVAR macro * port number + VARDEF InHead\1 1 + VARDEF InTail\1 1 + VARDEF OutDisable\1 1 + VARDEF OutHead\1 1 + VARDEF OutTail\1 1 + VARDEF OutCtrl\1 1 + VARDEF OutFlush\1 1 + VARDEF SetUp\1 1 + VARDEF Param\1 1 + VARDEF Command\1 1 + VARDEF SoftFlow\1 1 + ; private: + VARDEF XonOff\1 1 + endm + + + VARBASE 0 ; start variables at address $0000 + PORTVAR 0 ; define variables for port 0 + PORTVAR 1 ; define variables for port 1 + PORTVAR 2 ; define variables for port 2 + PORTVAR 3 ; define variables for port 3 + PORTVAR 4 ; define variables for port 4 + PORTVAR 5 ; define variables for port 5 + PORTVAR 6 ; define variables for port 6 + + + + VARDEF Crystal 1 ; 0 = unknown, 1 = normal, 2 = turbo + VARDEF Pad_a 1 + VARDEF TimerH 1 + VARDEF TimerL 1 + VARDEF CDHead 1 + VARDEF CDTail 1 + VARDEF CDStatus 1 + VARDEF Pad_b 1 + + VARDEF CommonCDo 1 ; for carrier detect optimization + VARDEF CommonCDc 1 ; for carrier detect debouncing + VARDEF CommonCDb 1 ; for carrier detect debouncing + + + VARBASE $0200 + VARDEF obuf0 256 ; output data (characters only) + VARDEF obuf1 256 + VARDEF obuf2 256 + VARDEF obuf3 256 + VARDEF obuf4 256 + VARDEF obuf5 256 + VARDEF obuf6 256 + + VARDEF ibuf0 256 ; input data (characters, events etc - see ictl) + VARDEF ibuf1 256 + VARDEF ibuf2 256 + VARDEF ibuf3 256 + VARDEF ibuf4 256 + VARDEF ibuf5 256 + VARDEF ibuf6 256 + + VARDEF ictl0 256 ; input control information (type of data in ibuf) + VARDEF ictl1 256 + VARDEF ictl2 256 + VARDEF ictl3 256 + VARDEF ictl4 256 + VARDEF ictl5 256 + VARDEF ictl6 256 + + VARDEF cdbuf 256 ; CD event queue + + +ACIA0 equ $4400 +ACIA1 equ $4c00 +ACIA2 equ $5400 +ACIA3 equ $5c00 +ACIA4 equ $6400 +ACIA5 equ $6c00 +ACIA6 equ $7400 + +A_DATA equ $00 +A_SR equ $02 +A_CMD equ $04 +A_CTRL equ $06 +; 00 write transmit data read received data +; 02 reset ACIA read status register +; 04 write command register read command register +; 06 write control register read control register + +CIA equ $7c00 ; 8520 CIA +C_PA equ $00 ; port A data register +C_PB equ $02 ; port B data register +C_DDRA equ $04 ; data direction register for port A +C_DDRB equ $06 ; data direction register for port B +C_TAL equ $08 ; timer A +C_TAH equ $0a +C_TBL equ $0c ; timer B +C_TBH equ $0e +C_TODL equ $10 ; TOD LSB +C_TODM equ $12 ; TOD middle byte +C_TODH equ $14 ; TOD MSB +C_DATA equ $18 ; serial data register +C_INTCTRL equ $1a ; interrupt control register +C_CTRLA equ $1c ; control register A +C_CTRLB equ $1e ; control register B + + + + + + section main,code,CODE-2 + + db >CODE,. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, and the entire permission notice in its entirety, + * including the disclaimer of warranties. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * ALTERNATIVELY, this product may be distributed under the terms of + * the GNU Public License, in which case the provisions of the GPL are + * required INSTEAD OF the above restrictions. (This clause is + * necessary due to a potential bad interaction between the GPL and + * the restrictions contained in a BSD-style copyright.) + * + * THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* This is the 65EC02 code by Jukka Marin that is executed by + the A2232's 65EC02 processor (base address: 0x3800) + Source file: ser_a2232fw.ax + Version: 1.3 (951029) + Known Bugs: Cannot send a break yet +*/ +static unsigned char a2232_65EC02code[] = { + 0x38, 0x00, 0xA2, 0xFF, 0x9A, 0xD8, 0xA2, 0x00, + 0xA9, 0x00, 0xA0, 0x54, 0x95, 0x00, 0xE8, 0x88, + 0xD0, 0xFA, 0x64, 0x5C, 0x64, 0x5E, 0x64, 0x58, + 0x64, 0x59, 0xA9, 0x00, 0x85, 0x55, 0xA9, 0xAA, + 0xC9, 0x64, 0x90, 0x02, 0xE6, 0x55, 0xA5, 0x54, + 0xF0, 0x03, 0x4C, 0x92, 0x38, 0xA9, 0x98, 0x8D, + 0x06, 0x44, 0xA9, 0x0B, 0x8D, 0x04, 0x44, 0xAD, + 0x02, 0x44, 0xA9, 0x80, 0x8D, 0x1A, 0x7C, 0xA9, + 0xFF, 0x8D, 0x08, 0x7C, 0x8D, 0x0A, 0x7C, 0xA2, + 0x00, 0x8E, 0x00, 0x44, 0xEA, 0xEA, 0xAD, 0x02, + 0x44, 0xEA, 0xEA, 0x8E, 0x00, 0x44, 0xAD, 0x02, + 0x44, 0x29, 0x10, 0xF0, 0xF9, 0xA9, 0x11, 0x8E, + 0x00, 0x44, 0x8D, 0x1C, 0x7C, 0xAD, 0x02, 0x44, + 0x29, 0x10, 0xF0, 0xF9, 0x8E, 0x1C, 0x7C, 0xAD, + 0x08, 0x7C, 0x85, 0x57, 0xAD, 0x0A, 0x7C, 0x85, + 0x56, 0xC9, 0xD0, 0x90, 0x05, 0xA9, 0x02, 0x4C, + 0x82, 0x38, 0xA9, 0x01, 0x85, 0x54, 0xA9, 0x00, + 0x8D, 0x02, 0x44, 0x8D, 0x06, 0x44, 0x8D, 0x04, + 0x44, 0x4C, 0x92, 0x38, 0xAD, 0x00, 0x7C, 0xC5, + 0x5C, 0xF0, 0x1F, 0xC5, 0x5E, 0xF0, 0x09, 0x85, + 0x5E, 0xA9, 0x40, 0x85, 0x5D, 0x4C, 0xB8, 0x38, + 0xC6, 0x5D, 0x10, 0x0E, 0xA6, 0x58, 0x9D, 0x00, + 0x17, 0xE8, 0xE4, 0x59, 0xF0, 0x04, 0x86, 0x58, + 0x85, 0x5C, 0x20, 0x23, 0x3A, 0xA5, 0x07, 0xF0, + 0x0F, 0xA5, 0x0A, 0x85, 0x0B, 0xA5, 0x08, 0x09, + 0x10, 0x8D, 0x06, 0x44, 0x64, 0x02, 0x64, 0x07, + 0xA5, 0x00, 0xE5, 0x01, 0xC9, 0xC8, 0xA5, 0x09, + 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, + 0x44, 0xA5, 0x06, 0xF0, 0x08, 0xA5, 0x03, 0x85, + 0x04, 0x64, 0x02, 0x64, 0x06, 0x20, 0x23, 0x3A, + 0xA5, 0x13, 0xF0, 0x0F, 0xA5, 0x16, 0x85, 0x17, + 0xA5, 0x14, 0x09, 0x10, 0x8D, 0x06, 0x4C, 0x64, + 0x0E, 0x64, 0x13, 0xA5, 0x0C, 0xE5, 0x0D, 0xC9, + 0xC8, 0xA5, 0x15, 0x29, 0xF3, 0xB0, 0x02, 0x09, + 0x08, 0x8D, 0x04, 0x4C, 0xA5, 0x12, 0xF0, 0x08, + 0xA5, 0x0F, 0x85, 0x10, 0x64, 0x0E, 0x64, 0x12, + 0x20, 0x23, 0x3A, 0xA5, 0x1F, 0xF0, 0x0F, 0xA5, + 0x22, 0x85, 0x23, 0xA5, 0x20, 0x09, 0x10, 0x8D, + 0x06, 0x54, 0x64, 0x1A, 0x64, 0x1F, 0xA5, 0x18, + 0xE5, 0x19, 0xC9, 0xC8, 0xA5, 0x21, 0x29, 0xF3, + 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, 0x54, 0xA5, + 0x1E, 0xF0, 0x08, 0xA5, 0x1B, 0x85, 0x1C, 0x64, + 0x1A, 0x64, 0x1E, 0x20, 0x23, 0x3A, 0xA5, 0x2B, + 0xF0, 0x0F, 0xA5, 0x2E, 0x85, 0x2F, 0xA5, 0x2C, + 0x09, 0x10, 0x8D, 0x06, 0x5C, 0x64, 0x26, 0x64, + 0x2B, 0xA5, 0x24, 0xE5, 0x25, 0xC9, 0xC8, 0xA5, + 0x2D, 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, + 0x04, 0x5C, 0xA5, 0x2A, 0xF0, 0x08, 0xA5, 0x27, + 0x85, 0x28, 0x64, 0x26, 0x64, 0x2A, 0x20, 0x23, + 0x3A, 0xA5, 0x37, 0xF0, 0x0F, 0xA5, 0x3A, 0x85, + 0x3B, 0xA5, 0x38, 0x09, 0x10, 0x8D, 0x06, 0x64, + 0x64, 0x32, 0x64, 0x37, 0xA5, 0x30, 0xE5, 0x31, + 0xC9, 0xC8, 0xA5, 0x39, 0x29, 0xF3, 0xB0, 0x02, + 0x09, 0x08, 0x8D, 0x04, 0x64, 0xA5, 0x36, 0xF0, + 0x08, 0xA5, 0x33, 0x85, 0x34, 0x64, 0x32, 0x64, + 0x36, 0x20, 0x23, 0x3A, 0xA5, 0x43, 0xF0, 0x0F, + 0xA5, 0x46, 0x85, 0x47, 0xA5, 0x44, 0x09, 0x10, + 0x8D, 0x06, 0x6C, 0x64, 0x3E, 0x64, 0x43, 0xA5, + 0x3C, 0xE5, 0x3D, 0xC9, 0xC8, 0xA5, 0x45, 0x29, + 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, 0x6C, + 0xA5, 0x42, 0xF0, 0x08, 0xA5, 0x3F, 0x85, 0x40, + 0x64, 0x3E, 0x64, 0x42, 0x20, 0x23, 0x3A, 0xA5, + 0x4F, 0xF0, 0x0F, 0xA5, 0x52, 0x85, 0x53, 0xA5, + 0x50, 0x09, 0x10, 0x8D, 0x06, 0x74, 0x64, 0x4A, + 0x64, 0x4F, 0xA5, 0x48, 0xE5, 0x49, 0xC9, 0xC8, + 0xA5, 0x51, 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, + 0x8D, 0x04, 0x74, 0xA5, 0x4E, 0xF0, 0x08, 0xA5, + 0x4B, 0x85, 0x4C, 0x64, 0x4A, 0x64, 0x4E, 0x20, + 0x23, 0x3A, 0x4C, 0x92, 0x38, 0xAD, 0x02, 0x44, + 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, + 0xAD, 0x00, 0x44, 0xD0, 0x32, 0xA6, 0x00, 0xA9, + 0x01, 0x9D, 0x00, 0x10, 0xA9, 0x01, 0x9D, 0x00, + 0x09, 0xE8, 0xE4, 0x01, 0xF0, 0x02, 0x86, 0x00, + 0x4C, 0x65, 0x3A, 0xA6, 0x00, 0xAD, 0x00, 0x44, + 0x9D, 0x00, 0x09, 0x9E, 0x00, 0x10, 0xE8, 0xE4, + 0x01, 0xF0, 0x02, 0x86, 0x00, 0x29, 0x7F, 0xC9, + 0x13, 0xD0, 0x04, 0xA5, 0x0B, 0x85, 0x02, 0xAD, + 0x02, 0x44, 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x05, + 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x01, 0xD0, + 0x21, 0x8E, 0x00, 0x44, 0x64, 0x05, 0x4C, 0x98, + 0x3A, 0xA6, 0x04, 0xE4, 0x03, 0xF0, 0x13, 0xA5, + 0x02, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x01, + 0xD0, 0x08, 0xBD, 0x00, 0x02, 0x8D, 0x00, 0x44, + 0xE6, 0x04, 0xAD, 0x02, 0x4C, 0x89, 0x08, 0xF0, + 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, 0x4C, + 0xD0, 0x32, 0xA6, 0x0C, 0xA9, 0x01, 0x9D, 0x00, + 0x11, 0xA9, 0x01, 0x9D, 0x00, 0x0A, 0xE8, 0xE4, + 0x0D, 0xF0, 0x02, 0x86, 0x0C, 0x4C, 0xDA, 0x3A, + 0xA6, 0x0C, 0xAD, 0x00, 0x4C, 0x9D, 0x00, 0x0A, + 0x9E, 0x00, 0x11, 0xE8, 0xE4, 0x0D, 0xF0, 0x02, + 0x86, 0x0C, 0x29, 0x7F, 0xC9, 0x13, 0xD0, 0x04, + 0xA5, 0x17, 0x85, 0x0E, 0xAD, 0x02, 0x4C, 0x29, + 0x10, 0xF0, 0x2C, 0xA6, 0x11, 0xF0, 0x0F, 0xAD, + 0x02, 0x7C, 0x29, 0x02, 0xD0, 0x21, 0x8E, 0x00, + 0x4C, 0x64, 0x11, 0x4C, 0x0D, 0x3B, 0xA6, 0x10, + 0xE4, 0x0F, 0xF0, 0x13, 0xA5, 0x0E, 0xD0, 0x0F, + 0xAD, 0x02, 0x7C, 0x29, 0x02, 0xD0, 0x08, 0xBD, + 0x00, 0x03, 0x8D, 0x00, 0x4C, 0xE6, 0x10, 0xAD, + 0x02, 0x54, 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, + 0xF0, 0x1B, 0xAD, 0x00, 0x54, 0xD0, 0x32, 0xA6, + 0x18, 0xA9, 0x01, 0x9D, 0x00, 0x12, 0xA9, 0x01, + 0x9D, 0x00, 0x0B, 0xE8, 0xE4, 0x19, 0xF0, 0x02, + 0x86, 0x18, 0x4C, 0x4F, 0x3B, 0xA6, 0x18, 0xAD, + 0x00, 0x54, 0x9D, 0x00, 0x0B, 0x9E, 0x00, 0x12, + 0xE8, 0xE4, 0x19, 0xF0, 0x02, 0x86, 0x18, 0x29, + 0x7F, 0xC9, 0x13, 0xD0, 0x04, 0xA5, 0x23, 0x85, + 0x1A, 0xAD, 0x02, 0x54, 0x29, 0x10, 0xF0, 0x2C, + 0xA6, 0x1D, 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, + 0x04, 0xD0, 0x21, 0x8E, 0x00, 0x54, 0x64, 0x1D, + 0x4C, 0x82, 0x3B, 0xA6, 0x1C, 0xE4, 0x1B, 0xF0, + 0x13, 0xA5, 0x1A, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, + 0x29, 0x04, 0xD0, 0x08, 0xBD, 0x00, 0x04, 0x8D, + 0x00, 0x54, 0xE6, 0x1C, 0xAD, 0x02, 0x5C, 0x89, + 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, + 0x00, 0x5C, 0xD0, 0x32, 0xA6, 0x24, 0xA9, 0x01, + 0x9D, 0x00, 0x13, 0xA9, 0x01, 0x9D, 0x00, 0x0C, + 0xE8, 0xE4, 0x25, 0xF0, 0x02, 0x86, 0x24, 0x4C, + 0xC4, 0x3B, 0xA6, 0x24, 0xAD, 0x00, 0x5C, 0x9D, + 0x00, 0x0C, 0x9E, 0x00, 0x13, 0xE8, 0xE4, 0x25, + 0xF0, 0x02, 0x86, 0x24, 0x29, 0x7F, 0xC9, 0x13, + 0xD0, 0x04, 0xA5, 0x2F, 0x85, 0x26, 0xAD, 0x02, + 0x5C, 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x29, 0xF0, + 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x08, 0xD0, 0x21, + 0x8E, 0x00, 0x5C, 0x64, 0x29, 0x4C, 0xF7, 0x3B, + 0xA6, 0x28, 0xE4, 0x27, 0xF0, 0x13, 0xA5, 0x26, + 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x08, 0xD0, + 0x08, 0xBD, 0x00, 0x05, 0x8D, 0x00, 0x5C, 0xE6, + 0x28, 0xAD, 0x02, 0x64, 0x89, 0x08, 0xF0, 0x3B, + 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, 0x64, 0xD0, + 0x32, 0xA6, 0x30, 0xA9, 0x01, 0x9D, 0x00, 0x14, + 0xA9, 0x01, 0x9D, 0x00, 0x0D, 0xE8, 0xE4, 0x31, + 0xF0, 0x02, 0x86, 0x30, 0x4C, 0x39, 0x3C, 0xA6, + 0x30, 0xAD, 0x00, 0x64, 0x9D, 0x00, 0x0D, 0x9E, + 0x00, 0x14, 0xE8, 0xE4, 0x31, 0xF0, 0x02, 0x86, + 0x30, 0x29, 0x7F, 0xC9, 0x13, 0xD0, 0x04, 0xA5, + 0x3B, 0x85, 0x32, 0xAD, 0x02, 0x64, 0x29, 0x10, + 0xF0, 0x2C, 0xA6, 0x35, 0xF0, 0x0F, 0xAD, 0x02, + 0x7C, 0x29, 0x10, 0xD0, 0x21, 0x8E, 0x00, 0x64, + 0x64, 0x35, 0x4C, 0x6C, 0x3C, 0xA6, 0x34, 0xE4, + 0x33, 0xF0, 0x13, 0xA5, 0x32, 0xD0, 0x0F, 0xAD, + 0x02, 0x7C, 0x29, 0x10, 0xD0, 0x08, 0xBD, 0x00, + 0x06, 0x8D, 0x00, 0x64, 0xE6, 0x34, 0xAD, 0x02, + 0x6C, 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, + 0x1B, 0xAD, 0x00, 0x6C, 0xD0, 0x32, 0xA6, 0x3C, + 0xA9, 0x01, 0x9D, 0x00, 0x15, 0xA9, 0x01, 0x9D, + 0x00, 0x0E, 0xE8, 0xE4, 0x3D, 0xF0, 0x02, 0x86, + 0x3C, 0x4C, 0xAE, 0x3C, 0xA6, 0x3C, 0xAD, 0x00, + 0x6C, 0x9D, 0x00, 0x0E, 0x9E, 0x00, 0x15, 0xE8, + 0xE4, 0x3D, 0xF0, 0x02, 0x86, 0x3C, 0x29, 0x7F, + 0xC9, 0x13, 0xD0, 0x04, 0xA5, 0x47, 0x85, 0x3E, + 0xAD, 0x02, 0x6C, 0x29, 0x10, 0xF0, 0x2C, 0xA6, + 0x41, 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x20, + 0xD0, 0x21, 0x8E, 0x00, 0x6C, 0x64, 0x41, 0x4C, + 0xE1, 0x3C, 0xA6, 0x40, 0xE4, 0x3F, 0xF0, 0x13, + 0xA5, 0x3E, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, + 0x20, 0xD0, 0x08, 0xBD, 0x00, 0x07, 0x8D, 0x00, + 0x6C, 0xE6, 0x40, 0xAD, 0x02, 0x74, 0x89, 0x08, + 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, + 0x74, 0xD0, 0x32, 0xA6, 0x48, 0xA9, 0x01, 0x9D, + 0x00, 0x16, 0xA9, 0x01, 0x9D, 0x00, 0x0F, 0xE8, + 0xE4, 0x49, 0xF0, 0x02, 0x86, 0x48, 0x4C, 0x23, + 0x3D, 0xA6, 0x48, 0xAD, 0x00, 0x74, 0x9D, 0x00, + 0x0F, 0x9E, 0x00, 0x16, 0xE8, 0xE4, 0x49, 0xF0, + 0x02, 0x86, 0x48, 0x29, 0x7F, 0xC9, 0x13, 0xD0, + 0x04, 0xA5, 0x53, 0x85, 0x4A, 0xAD, 0x02, 0x74, + 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x4D, 0xF0, 0x0F, + 0xAD, 0x02, 0x7C, 0x29, 0x40, 0xD0, 0x21, 0x8E, + 0x00, 0x74, 0x64, 0x4D, 0x4C, 0x56, 0x3D, 0xA6, + 0x4C, 0xE4, 0x4B, 0xF0, 0x13, 0xA5, 0x4A, 0xD0, + 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x40, 0xD0, 0x08, + 0xBD, 0x00, 0x08, 0x8D, 0x00, 0x74, 0xE6, 0x4C, + 0x60, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xD0, 0xD0, 0x00, 0x38, + 0xCE, 0xC0, +}; diff --git a/drivers/staging/generic_serial/sx.c b/drivers/staging/generic_serial/sx.c new file mode 100644 index 000000000000..1291462bcddb --- /dev/null +++ b/drivers/staging/generic_serial/sx.c @@ -0,0 +1,2894 @@ +/* sx.c -- driver for the Specialix SX series cards. + * + * This driver will also support the older SI, and XIO cards. + * + * + * (C) 1998 - 2004 R.E.Wolff@BitWizard.nl + * + * Simon Allen (simonallen@cix.compulink.co.uk) wrote a previous + * version of this driver. Some fragments may have been copied. (none + * yet :-) + * + * Specialix pays for the development and support of this driver. + * Please DO contact support@specialix.co.uk if you require + * support. But please read the documentation (sx.txt) first. + * + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * Revision history: + * Revision 1.33 2000/03/09 10:00:00 pvdl,wolff + * - Fixed module and port counting + * - Fixed signal handling + * - Fixed an Ooops + * + * Revision 1.32 2000/03/07 09:00:00 wolff,pvdl + * - Fixed some sx_dprintk typos + * - added detection for an invalid board/module configuration + * + * Revision 1.31 2000/03/06 12:00:00 wolff,pvdl + * - Added support for EISA + * + * Revision 1.30 2000/01/21 17:43:06 wolff + * - Added support for SX+ + * + * Revision 1.26 1999/08/05 15:22:14 wolff + * - Port to 2.3.x + * - Reformatted to Linus' liking. + * + * Revision 1.25 1999/07/30 14:24:08 wolff + * Had accidentally left "gs_debug" set to "-1" instead of "off" (=0). + * + * Revision 1.24 1999/07/28 09:41:52 wolff + * - I noticed the remark about use-count straying in sx.txt. I checked + * sx_open, and found a few places where that could happen. I hope it's + * fixed now. + * + * Revision 1.23 1999/07/28 08:56:06 wolff + * - Fixed crash when sx_firmware run twice. + * - Added sx_slowpoll as a module parameter (I guess nobody really wanted + * to change it from the default... ) + * - Fixed a stupid editing problem I introduced in 1.22. + * - Fixed dropping characters on a termios change. + * + * Revision 1.22 1999/07/26 21:01:43 wolff + * Russell Brown noticed that I had overlooked 4 out of six modem control + * signals in sx_getsignals. Ooops. + * + * Revision 1.21 1999/07/23 09:11:33 wolff + * I forgot to free dynamically allocated memory when the driver is unloaded. + * + * Revision 1.20 1999/07/20 06:25:26 wolff + * The "closing wait" wasn't honoured. Thanks to James Griffiths for + * reporting this. + * + * Revision 1.19 1999/07/11 08:59:59 wolff + * Fixed an oops in close, when an open was pending. Changed the memtest + * a bit. Should also test the board in word-mode, however my card fails the + * memtest then. I still have to figure out what is wrong... + * + * Revision 1.18 1999/06/10 09:38:42 wolff + * Changed the format of the firmware revision from %04x to %x.%02x . + * + * Revision 1.17 1999/06/04 09:44:35 wolff + * fixed problem: reference to pci stuff when config_pci was off... + * Thanks to Jorge Novo for noticing this. + * + * Revision 1.16 1999/06/02 08:30:15 wolff + * added/removed the workaround for the DCD bug in the Firmware. + * A bit more debugging code to locate that... + * + * Revision 1.15 1999/06/01 11:35:30 wolff + * when DCD is left low (floating?), on TA's the firmware first tells us + * that DCD is high, but after a short while suddenly comes to the + * conclusion that it is low. All this would be fine, if it weren't that + * Unix requires us to send a "hangup" signal in that case. This usually + * all happens BEFORE the program has had a chance to ioctl the device + * into clocal mode.. + * + * Revision 1.14 1999/05/25 11:18:59 wolff + * Added PCI-fix. + * Added checks for return code of sx_sendcommand. + * Don't issue "reconfig" if port isn't open yet. (bit us on TA modules...) + * + * Revision 1.13 1999/04/29 15:18:01 wolff + * Fixed an "oops" that showed on SuSE 6.0 systems. + * Activate DTR again after stty 0. + * + * Revision 1.12 1999/04/29 07:49:52 wolff + * Improved "stty 0" handling a bit. (used to change baud to 9600 assuming + * the connection would be dropped anyway. That is not always the case, + * and confuses people). + * Told the card to always monitor the modem signals. + * Added support for dynamic gs_debug adjustments. + * Now tells the rest of the system the number of ports. + * + * Revision 1.11 1999/04/24 11:11:30 wolff + * Fixed two stupid typos in the memory test. + * + * Revision 1.10 1999/04/24 10:53:39 wolff + * Added some of Christian's suggestions. + * Fixed an HW_COOK_IN bug (ISIG was not in I_OTHER. We used to trust the + * card to send the signal to the process.....) + * + * Revision 1.9 1999/04/23 07:26:38 wolff + * Included Christian Lademann's 2.0 compile-warning fixes and interrupt + * assignment redesign. + * Cleanup of some other stuff. + * + * Revision 1.8 1999/04/16 13:05:30 wolff + * fixed a DCD change unnoticed bug. + * + * Revision 1.7 1999/04/14 22:19:51 wolff + * Fixed typo that showed up in 2.0.x builds (get_user instead of Get_user!) + * + * Revision 1.6 1999/04/13 18:40:20 wolff + * changed misc-minor to 161, as assigned by HPA. + * + * Revision 1.5 1999/04/13 15:12:25 wolff + * Fixed use-count leak when "hangup" occurred. + * Added workaround for a stupid-PCIBIOS bug. + * + * + * Revision 1.4 1999/04/01 22:47:40 wolff + * Fixed < 1M linux-2.0 problem. + * (vremap isn't compatible with ioremap in that case) + * + * Revision 1.3 1999/03/31 13:45:45 wolff + * Firmware loading is now done through a separate IOCTL. + * + * Revision 1.2 1999/03/28 12:22:29 wolff + * rcs cleanup + * + * Revision 1.1 1999/03/28 12:10:34 wolff + * Readying for release on 2.0.x (sorry David, 1.01 becomes 1.1 for RCS). + * + * Revision 0.12 1999/03/28 09:20:10 wolff + * Fixed problem in 0.11, continueing cleanup. + * + * Revision 0.11 1999/03/28 08:46:44 wolff + * cleanup. Not good. + * + * Revision 0.10 1999/03/28 08:09:43 wolff + * Fixed loosing characters on close. + * + * Revision 0.9 1999/03/21 22:52:01 wolff + * Ported back to 2.2.... (minor things) + * + * Revision 0.8 1999/03/21 22:40:33 wolff + * Port to 2.0 + * + * Revision 0.7 1999/03/21 19:06:34 wolff + * Fixed hangup processing. + * + * Revision 0.6 1999/02/05 08:45:14 wolff + * fixed real_raw problems. Inclusion into kernel imminent. + * + * Revision 0.5 1998/12/21 23:51:06 wolff + * Snatched a nasty bug: sx_transmit_chars was getting re-entered, and it + * shouldn't have. THATs why I want to have transmit interrupts even when + * the buffer is empty. + * + * Revision 0.4 1998/12/17 09:34:46 wolff + * PPP works. ioctl works. Basically works! + * + * Revision 0.3 1998/12/15 13:05:18 wolff + * It works! Wow! Gotta start implementing IOCTL and stuff.... + * + * Revision 0.2 1998/12/01 08:33:53 wolff + * moved over to 2.1.130 + * + * Revision 0.1 1998/11/03 21:23:51 wolff + * Initial revision. Detects SX card. + * + * */ + +#define SX_VERSION 1.33 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* The 3.0.0 version of sxboards/sxwindow.h uses BYTE and WORD.... */ +#define BYTE u8 +#define WORD u16 + +/* .... but the 3.0.4 version uses _u8 and _u16. */ +#define _u8 u8 +#define _u16 u16 + +#include "sxboards.h" +#include "sxwindow.h" + +#include +#include "sx.h" + +/* I don't think that this driver can handle more than 256 ports on + one machine. You'll have to increase the number of boards in sx.h + if you want more than 4 boards. */ + +#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 +#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000 +#endif + +/* Configurable options: + (Don't be too sure that it'll work if you toggle them) */ + +/* Am I paranoid or not ? ;-) */ +#undef SX_PARANOIA_CHECK + +/* 20 -> 2000 per second. The card should rate-limit interrupts at 100 + Hz, but it is user configurable. I don't recommend going above 1000 + Hz. The interrupt ratelimit might trigger if the interrupt is + shared with a very active other device. */ +#define IRQ_RATE_LIMIT 20 + +/* Sharing interrupts is possible now. If the other device wants more + than 2000 interrupts per second, we'd gracefully decline further + interrupts. That's not what we want. On the other hand, if the + other device interrupts 2000 times a second, don't use the SX + interrupt. Use polling. */ +#undef IRQ_RATE_LIMIT + +#if 0 +/* Not implemented */ +/* + * The following defines are mostly for testing purposes. But if you need + * some nice reporting in your syslog, you can define them also. + */ +#define SX_REPORT_FIFO +#define SX_REPORT_OVERRUN +#endif + +/* Function prototypes */ +static void sx_disable_tx_interrupts(void *ptr); +static void sx_enable_tx_interrupts(void *ptr); +static void sx_disable_rx_interrupts(void *ptr); +static void sx_enable_rx_interrupts(void *ptr); +static int sx_carrier_raised(struct tty_port *port); +static void sx_shutdown_port(void *ptr); +static int sx_set_real_termios(void *ptr); +static void sx_close(void *ptr); +static int sx_chars_in_buffer(void *ptr); +static int sx_init_board(struct sx_board *board); +static int sx_init_portstructs(int nboards, int nports); +static long sx_fw_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg); +static int sx_init_drivers(void); + +static struct tty_driver *sx_driver; + +static DEFINE_MUTEX(sx_boards_lock); +static struct sx_board boards[SX_NBOARDS]; +static struct sx_port *sx_ports; +static int sx_initialized; +static int sx_nports; +static int sx_debug; + +/* You can have the driver poll your card. + - Set sx_poll to 1 to poll every timer tick (10ms on Intel). + This is used when the card cannot use an interrupt for some reason. + + - set sx_slowpoll to 100 to do an extra poll once a second (on Intel). If + the driver misses an interrupt (report this if it DOES happen to you!) + everything will continue to work.... + */ +static int sx_poll = 1; +static int sx_slowpoll; + +/* The card limits the number of interrupts per second. + At 115k2 "100" should be sufficient. + If you're using higher baudrates, you can increase this... + */ + +static int sx_maxints = 100; + +#ifdef CONFIG_ISA + +/* These are the only open spaces in my computer. Yours may have more + or less.... -- REW + duh: Card at 0xa0000 is possible on HP Netserver?? -- pvdl +*/ +static int sx_probe_addrs[] = { + 0xc0000, 0xd0000, 0xe0000, + 0xc8000, 0xd8000, 0xe8000 +}; +static int si_probe_addrs[] = { + 0xc0000, 0xd0000, 0xe0000, + 0xc8000, 0xd8000, 0xe8000, 0xa0000 +}; +static int si1_probe_addrs[] = { + 0xd0000 +}; + +#define NR_SX_ADDRS ARRAY_SIZE(sx_probe_addrs) +#define NR_SI_ADDRS ARRAY_SIZE(si_probe_addrs) +#define NR_SI1_ADDRS ARRAY_SIZE(si1_probe_addrs) + +module_param_array(sx_probe_addrs, int, NULL, 0); +module_param_array(si_probe_addrs, int, NULL, 0); +#endif + +/* Set the mask to all-ones. This alas, only supports 32 interrupts. + Some architectures may need more. */ +static int sx_irqmask = -1; + +module_param(sx_poll, int, 0); +module_param(sx_slowpoll, int, 0); +module_param(sx_maxints, int, 0); +module_param(sx_debug, int, 0); +module_param(sx_irqmask, int, 0); + +MODULE_LICENSE("GPL"); + +static struct real_driver sx_real_driver = { + sx_disable_tx_interrupts, + sx_enable_tx_interrupts, + sx_disable_rx_interrupts, + sx_enable_rx_interrupts, + sx_shutdown_port, + sx_set_real_termios, + sx_chars_in_buffer, + sx_close, +}; + +/* + This driver can spew a whole lot of debugging output at you. If you + need maximum performance, you should disable the DEBUG define. To + aid in debugging in the field, I'm leaving the compile-time debug + features enabled, and disable them "runtime". That allows me to + instruct people with problems to enable debugging without requiring + them to recompile... +*/ +#define DEBUG + +#ifdef DEBUG +#define sx_dprintk(f, str...) if (sx_debug & f) printk (str) +#else +#define sx_dprintk(f, str...) /* nothing */ +#endif + +#define func_enter() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s\n",__func__) +#define func_exit() sx_dprintk(SX_DEBUG_FLOW, "sx: exit %s\n",__func__) + +#define func_enter2() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \ + __func__, port->line) + +/* + * Firmware loader driver specific routines + * + */ + +static const struct file_operations sx_fw_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = sx_fw_ioctl, + .llseek = noop_llseek, +}; + +static struct miscdevice sx_fw_device = { + SXCTL_MISC_MINOR, "sxctl", &sx_fw_fops +}; + +#ifdef SX_PARANOIA_CHECK + +/* This doesn't work. Who's paranoid around here? Not me! */ + +static inline int sx_paranoia_check(struct sx_port const *port, + char *name, const char *routine) +{ + static const char *badmagic = KERN_ERR "sx: Warning: bad sx port magic " + "number for device %s in %s\n"; + static const char *badinfo = KERN_ERR "sx: Warning: null sx port for " + "device %s in %s\n"; + + if (!port) { + printk(badinfo, name, routine); + return 1; + } + if (port->magic != SX_MAGIC) { + printk(badmagic, name, routine); + return 1; + } + + return 0; +} +#else +#define sx_paranoia_check(a,b,c) 0 +#endif + +/* The timeouts. First try 30 times as fast as possible. Then give + the card some time to breathe between accesses. (Otherwise the + processor on the card might not be able to access its OWN bus... */ + +#define TIMEOUT_1 30 +#define TIMEOUT_2 1000000 + +#ifdef DEBUG +static void my_hd_io(void __iomem *p, int len) +{ + int i, j, ch; + unsigned char __iomem *addr = p; + + for (i = 0; i < len; i += 16) { + printk("%p ", addr + i); + for (j = 0; j < 16; j++) { + printk("%02x %s", readb(addr + j + i), + (j == 7) ? " " : ""); + } + for (j = 0; j < 16; j++) { + ch = readb(addr + j + i); + printk("%c", (ch < 0x20) ? '.' : + ((ch > 0x7f) ? '.' : ch)); + } + printk("\n"); + } +} +static void my_hd(void *p, int len) +{ + int i, j, ch; + unsigned char *addr = p; + + for (i = 0; i < len; i += 16) { + printk("%p ", addr + i); + for (j = 0; j < 16; j++) { + printk("%02x %s", addr[j + i], (j == 7) ? " " : ""); + } + for (j = 0; j < 16; j++) { + ch = addr[j + i]; + printk("%c", (ch < 0x20) ? '.' : + ((ch > 0x7f) ? '.' : ch)); + } + printk("\n"); + } +} +#endif + +/* This needs redoing for Alpha -- REW -- Done. */ + +static inline void write_sx_byte(struct sx_board *board, int offset, u8 byte) +{ + writeb(byte, board->base + offset); +} + +static inline u8 read_sx_byte(struct sx_board *board, int offset) +{ + return readb(board->base + offset); +} + +static inline void write_sx_word(struct sx_board *board, int offset, u16 word) +{ + writew(word, board->base + offset); +} + +static inline u16 read_sx_word(struct sx_board *board, int offset) +{ + return readw(board->base + offset); +} + +static int sx_busy_wait_eq(struct sx_board *board, + int offset, int mask, int correctval) +{ + int i; + + func_enter(); + + for (i = 0; i < TIMEOUT_1; i++) + if ((read_sx_byte(board, offset) & mask) == correctval) { + func_exit(); + return 1; + } + + for (i = 0; i < TIMEOUT_2; i++) { + if ((read_sx_byte(board, offset) & mask) == correctval) { + func_exit(); + return 1; + } + udelay(1); + } + + func_exit(); + return 0; +} + +static int sx_busy_wait_neq(struct sx_board *board, + int offset, int mask, int badval) +{ + int i; + + func_enter(); + + for (i = 0; i < TIMEOUT_1; i++) + if ((read_sx_byte(board, offset) & mask) != badval) { + func_exit(); + return 1; + } + + for (i = 0; i < TIMEOUT_2; i++) { + if ((read_sx_byte(board, offset) & mask) != badval) { + func_exit(); + return 1; + } + udelay(1); + } + + func_exit(); + return 0; +} + +/* 5.6.4 of 6210028 r2.3 */ +static int sx_reset(struct sx_board *board) +{ + func_enter(); + + if (IS_SX_BOARD(board)) { + + write_sx_byte(board, SX_CONFIG, 0); + write_sx_byte(board, SX_RESET, 1); /* Value doesn't matter */ + + if (!sx_busy_wait_eq(board, SX_RESET_STATUS, 1, 0)) { + printk(KERN_INFO "sx: Card doesn't respond to " + "reset...\n"); + return 0; + } + } else if (IS_EISA_BOARD(board)) { + outb(board->irq << 4, board->eisa_base + 0xc02); + } else if (IS_SI1_BOARD(board)) { + write_sx_byte(board, SI1_ISA_RESET, 0); /*value doesn't matter*/ + } else { + /* Gory details of the SI/ISA board */ + write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_SET); + write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_CLEAR); + write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_CLEAR); + write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_CLEAR); + write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR); + write_sx_byte(board, SI2_ISA_IRQSET, SI2_ISA_IRQSET_CLEAR); + } + + func_exit(); + return 1; +} + +/* This doesn't work on machines where "NULL" isn't 0 */ +/* If you have one of those, someone will need to write + the equivalent of this, which will amount to about 3 lines. I don't + want to complicate this right now. -- REW + (See, I do write comments every now and then :-) */ +#define OFFSETOF(strct, elem) ((long)&(((struct strct *)NULL)->elem)) + +#define CHAN_OFFSET(port,elem) (port->ch_base + OFFSETOF (_SXCHANNEL, elem)) +#define MODU_OFFSET(board,addr,elem) (addr + OFFSETOF (_SXMODULE, elem)) +#define BRD_OFFSET(board,elem) (OFFSETOF (_SXCARD, elem)) + +#define sx_write_channel_byte(port, elem, val) \ + write_sx_byte (port->board, CHAN_OFFSET (port, elem), val) + +#define sx_read_channel_byte(port, elem) \ + read_sx_byte (port->board, CHAN_OFFSET (port, elem)) + +#define sx_write_channel_word(port, elem, val) \ + write_sx_word (port->board, CHAN_OFFSET (port, elem), val) + +#define sx_read_channel_word(port, elem) \ + read_sx_word (port->board, CHAN_OFFSET (port, elem)) + +#define sx_write_module_byte(board, addr, elem, val) \ + write_sx_byte (board, MODU_OFFSET (board, addr, elem), val) + +#define sx_read_module_byte(board, addr, elem) \ + read_sx_byte (board, MODU_OFFSET (board, addr, elem)) + +#define sx_write_module_word(board, addr, elem, val) \ + write_sx_word (board, MODU_OFFSET (board, addr, elem), val) + +#define sx_read_module_word(board, addr, elem) \ + read_sx_word (board, MODU_OFFSET (board, addr, elem)) + +#define sx_write_board_byte(board, elem, val) \ + write_sx_byte (board, BRD_OFFSET (board, elem), val) + +#define sx_read_board_byte(board, elem) \ + read_sx_byte (board, BRD_OFFSET (board, elem)) + +#define sx_write_board_word(board, elem, val) \ + write_sx_word (board, BRD_OFFSET (board, elem), val) + +#define sx_read_board_word(board, elem) \ + read_sx_word (board, BRD_OFFSET (board, elem)) + +static int sx_start_board(struct sx_board *board) +{ + if (IS_SX_BOARD(board)) { + write_sx_byte(board, SX_CONFIG, SX_CONF_BUSEN); + } else if (IS_EISA_BOARD(board)) { + write_sx_byte(board, SI2_EISA_OFF, SI2_EISA_VAL); + outb((board->irq << 4) | 4, board->eisa_base + 0xc02); + } else if (IS_SI1_BOARD(board)) { + write_sx_byte(board, SI1_ISA_RESET_CLEAR, 0); + write_sx_byte(board, SI1_ISA_INTCL, 0); + } else { + /* Don't bug me about the clear_set. + I haven't the foggiest idea what it's about -- REW */ + write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_CLEAR); + write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET); + } + return 1; +} + +#define SX_IRQ_REG_VAL(board) \ + ((board->flags & SX_ISA_BOARD) ? (board->irq << 4) : 0) + +/* Note. The SX register is write-only. Therefore, we have to enable the + bus too. This is a no-op, if you don't mess with this driver... */ +static int sx_start_interrupts(struct sx_board *board) +{ + + /* Don't call this with board->irq == 0 */ + + if (IS_SX_BOARD(board)) { + write_sx_byte(board, SX_CONFIG, SX_IRQ_REG_VAL(board) | + SX_CONF_BUSEN | SX_CONF_HOSTIRQ); + } else if (IS_EISA_BOARD(board)) { + inb(board->eisa_base + 0xc03); + } else if (IS_SI1_BOARD(board)) { + write_sx_byte(board, SI1_ISA_INTCL, 0); + write_sx_byte(board, SI1_ISA_INTCL_CLEAR, 0); + } else { + switch (board->irq) { + case 11: + write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_SET); + break; + case 12: + write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_SET); + break; + case 15: + write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_SET); + break; + default: + printk(KERN_INFO "sx: SI/XIO card doesn't support " + "interrupt %d.\n", board->irq); + return 0; + } + write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET); + } + + return 1; +} + +static int sx_send_command(struct sx_port *port, + int command, int mask, int newstat) +{ + func_enter2(); + write_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat), command); + func_exit(); + return sx_busy_wait_eq(port->board, CHAN_OFFSET(port, hi_hstat), mask, + newstat); +} + +static char *mod_type_s(int module_type) +{ + switch (module_type) { + case TA4: + return "TA4"; + case TA8: + return "TA8"; + case TA4_ASIC: + return "TA4_ASIC"; + case TA8_ASIC: + return "TA8_ASIC"; + case MTA_CD1400: + return "MTA_CD1400"; + case SXDC: + return "SXDC"; + default: + return "Unknown/invalid"; + } +} + +static char *pan_type_s(int pan_type) +{ + switch (pan_type) { + case MOD_RS232DB25: + return "MOD_RS232DB25"; + case MOD_RS232RJ45: + return "MOD_RS232RJ45"; + case MOD_RS422DB25: + return "MOD_RS422DB25"; + case MOD_PARALLEL: + return "MOD_PARALLEL"; + case MOD_2_RS232DB25: + return "MOD_2_RS232DB25"; + case MOD_2_RS232RJ45: + return "MOD_2_RS232RJ45"; + case MOD_2_RS422DB25: + return "MOD_2_RS422DB25"; + case MOD_RS232DB25MALE: + return "MOD_RS232DB25MALE"; + case MOD_2_PARALLEL: + return "MOD_2_PARALLEL"; + case MOD_BLANK: + return "empty"; + default: + return "invalid"; + } +} + +static int mod_compat_type(int module_type) +{ + return module_type >> 4; +} + +static void sx_reconfigure_port(struct sx_port *port) +{ + if (sx_read_channel_byte(port, hi_hstat) == HS_IDLE_OPEN) { + if (sx_send_command(port, HS_CONFIG, -1, HS_IDLE_OPEN) != 1) { + printk(KERN_WARNING "sx: Sent reconfigure command, but " + "card didn't react.\n"); + } + } else { + sx_dprintk(SX_DEBUG_TERMIOS, "sx: Not sending reconfigure: " + "port isn't open (%02x).\n", + sx_read_channel_byte(port, hi_hstat)); + } +} + +static void sx_setsignals(struct sx_port *port, int dtr, int rts) +{ + int t; + func_enter2(); + + t = sx_read_channel_byte(port, hi_op); + if (dtr >= 0) + t = dtr ? (t | OP_DTR) : (t & ~OP_DTR); + if (rts >= 0) + t = rts ? (t | OP_RTS) : (t & ~OP_RTS); + sx_write_channel_byte(port, hi_op, t); + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "setsignals: %d/%d\n", dtr, rts); + + func_exit(); +} + +static int sx_getsignals(struct sx_port *port) +{ + int i_stat, o_stat; + + o_stat = sx_read_channel_byte(port, hi_op); + i_stat = sx_read_channel_byte(port, hi_ip); + + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) " + "%02x/%02x\n", + (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0, + port->c_dcd, tty_port_carrier_raised(&port->gs.port), + sx_read_channel_byte(port, hi_ip), + sx_read_channel_byte(port, hi_state)); + + return (((o_stat & OP_DTR) ? TIOCM_DTR : 0) | + ((o_stat & OP_RTS) ? TIOCM_RTS : 0) | + ((i_stat & IP_CTS) ? TIOCM_CTS : 0) | + ((i_stat & IP_DCD) ? TIOCM_CAR : 0) | + ((i_stat & IP_DSR) ? TIOCM_DSR : 0) | + ((i_stat & IP_RI) ? TIOCM_RNG : 0)); +} + +static void sx_set_baud(struct sx_port *port) +{ + int t; + + if (port->board->ta_type == MOD_SXDC) { + switch (port->gs.baud) { + /* Save some typing work... */ +#define e(x) case x: t = BAUD_ ## x; break + e(50); + e(75); + e(110); + e(150); + e(200); + e(300); + e(600); + e(1200); + e(1800); + e(2000); + e(2400); + e(4800); + e(7200); + e(9600); + e(14400); + e(19200); + e(28800); + e(38400); + e(56000); + e(57600); + e(64000); + e(76800); + e(115200); + e(128000); + e(150000); + e(230400); + e(256000); + e(460800); + e(921600); + case 134: + t = BAUD_134_5; + break; + case 0: + t = -1; + break; + default: + /* Can I return "invalid"? */ + t = BAUD_9600; + printk(KERN_INFO "sx: unsupported baud rate: %d.\n", + port->gs.baud); + break; + } +#undef e + if (t > 0) { +/* The baud rate is not set to 0, so we're enabeling DTR... -- REW */ + sx_setsignals(port, 1, -1); + /* XXX This is not TA & MTA compatible */ + sx_write_channel_byte(port, hi_csr, 0xff); + + sx_write_channel_byte(port, hi_txbaud, t); + sx_write_channel_byte(port, hi_rxbaud, t); + } else { + sx_setsignals(port, 0, -1); + } + } else { + switch (port->gs.baud) { +#define e(x) case x: t = CSR_ ## x; break + e(75); + e(150); + e(300); + e(600); + e(1200); + e(2400); + e(4800); + e(1800); + e(9600); + e(19200); + e(57600); + e(38400); +/* TA supports 110, but not 115200, MTA supports 115200, but not 110 */ + case 110: + if (port->board->ta_type == MOD_TA) { + t = CSR_110; + break; + } else { + t = CSR_9600; + printk(KERN_INFO "sx: Unsupported baud rate: " + "%d.\n", port->gs.baud); + break; + } + case 115200: + if (port->board->ta_type == MOD_TA) { + t = CSR_9600; + printk(KERN_INFO "sx: Unsupported baud rate: " + "%d.\n", port->gs.baud); + break; + } else { + t = CSR_110; + break; + } + case 0: + t = -1; + break; + default: + t = CSR_9600; + printk(KERN_INFO "sx: Unsupported baud rate: %d.\n", + port->gs.baud); + break; + } +#undef e + if (t >= 0) { + sx_setsignals(port, 1, -1); + sx_write_channel_byte(port, hi_csr, t * 0x11); + } else { + sx_setsignals(port, 0, -1); + } + } +} + +/* Simon Allen's version of this routine was 225 lines long. 85 is a lot + better. -- REW */ + +static int sx_set_real_termios(void *ptr) +{ + struct sx_port *port = ptr; + + func_enter2(); + + if (!port->gs.port.tty) + return 0; + + /* What is this doing here? -- REW + Ha! figured it out. It is to allow you to get DTR active again + if you've dropped it with stty 0. Moved to set_baud, where it + belongs (next to the drop dtr if baud == 0) -- REW */ + /* sx_setsignals (port, 1, -1); */ + + sx_set_baud(port); + +#define CFLAG port->gs.port.tty->termios->c_cflag + sx_write_channel_byte(port, hi_mr1, + (C_PARENB(port->gs.port.tty) ? MR1_WITH : MR1_NONE) | + (C_PARODD(port->gs.port.tty) ? MR1_ODD : MR1_EVEN) | + (C_CRTSCTS(port->gs.port.tty) ? MR1_RTS_RXFLOW : 0) | + (((CFLAG & CSIZE) == CS8) ? MR1_8_BITS : 0) | + (((CFLAG & CSIZE) == CS7) ? MR1_7_BITS : 0) | + (((CFLAG & CSIZE) == CS6) ? MR1_6_BITS : 0) | + (((CFLAG & CSIZE) == CS5) ? MR1_5_BITS : 0)); + + sx_write_channel_byte(port, hi_mr2, + (C_CRTSCTS(port->gs.port.tty) ? MR2_CTS_TXFLOW : 0) | + (C_CSTOPB(port->gs.port.tty) ? MR2_2_STOP : + MR2_1_STOP)); + + switch (CFLAG & CSIZE) { + case CS8: + sx_write_channel_byte(port, hi_mask, 0xff); + break; + case CS7: + sx_write_channel_byte(port, hi_mask, 0x7f); + break; + case CS6: + sx_write_channel_byte(port, hi_mask, 0x3f); + break; + case CS5: + sx_write_channel_byte(port, hi_mask, 0x1f); + break; + default: + printk(KERN_INFO "sx: Invalid wordsize: %u\n", + (unsigned int)CFLAG & CSIZE); + break; + } + + sx_write_channel_byte(port, hi_prtcl, + (I_IXON(port->gs.port.tty) ? SP_TXEN : 0) | + (I_IXOFF(port->gs.port.tty) ? SP_RXEN : 0) | + (I_IXANY(port->gs.port.tty) ? SP_TANY : 0) | SP_DCEN); + + sx_write_channel_byte(port, hi_break, + (I_IGNBRK(port->gs.port.tty) ? BR_IGN : 0 | + I_BRKINT(port->gs.port.tty) ? BR_INT : 0)); + + sx_write_channel_byte(port, hi_txon, START_CHAR(port->gs.port.tty)); + sx_write_channel_byte(port, hi_rxon, START_CHAR(port->gs.port.tty)); + sx_write_channel_byte(port, hi_txoff, STOP_CHAR(port->gs.port.tty)); + sx_write_channel_byte(port, hi_rxoff, STOP_CHAR(port->gs.port.tty)); + + sx_reconfigure_port(port); + + /* Tell line discipline whether we will do input cooking */ + if (I_OTHER(port->gs.port.tty)) { + clear_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags); + } else { + set_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags); + } + sx_dprintk(SX_DEBUG_TERMIOS, "iflags: %x(%d) ", + (unsigned int)port->gs.port.tty->termios->c_iflag, + I_OTHER(port->gs.port.tty)); + +/* Tell line discipline whether we will do output cooking. + * If OPOST is set and no other output flags are set then we can do output + * processing. Even if only *one* other flag in the O_OTHER group is set + * we do cooking in software. + */ + if (O_OPOST(port->gs.port.tty) && !O_OTHER(port->gs.port.tty)) { + set_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags); + } else { + clear_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags); + } + sx_dprintk(SX_DEBUG_TERMIOS, "oflags: %x(%d)\n", + (unsigned int)port->gs.port.tty->termios->c_oflag, + O_OTHER(port->gs.port.tty)); + /* port->c_dcd = sx_get_CD (port); */ + func_exit(); + return 0; +} + +/* ********************************************************************** * + * the interrupt related routines * + * ********************************************************************** */ + +/* Note: + Other drivers use the macro "MIN" to calculate how much to copy. + This has the disadvantage that it will evaluate parts twice. That's + expensive when it's IO (and the compiler cannot optimize those away!). + Moreover, I'm not sure that you're race-free. + + I assign a value, and then only allow the value to decrease. This + is always safe. This makes the code a few lines longer, and you + know I'm dead against that, but I think it is required in this + case. */ + +static void sx_transmit_chars(struct sx_port *port) +{ + int c; + int tx_ip; + int txroom; + + func_enter2(); + sx_dprintk(SX_DEBUG_TRANSMIT, "Port %p: transmit %d chars\n", + port, port->gs.xmit_cnt); + + if (test_and_set_bit(SX_PORT_TRANSMIT_LOCK, &port->locks)) { + return; + } + + while (1) { + c = port->gs.xmit_cnt; + + sx_dprintk(SX_DEBUG_TRANSMIT, "Copying %d ", c); + tx_ip = sx_read_channel_byte(port, hi_txipos); + + /* Took me 5 minutes to deduce this formula. + Luckily it is literally in the manual in section 6.5.4.3.5 */ + txroom = (sx_read_channel_byte(port, hi_txopos) - tx_ip - 1) & + 0xff; + + /* Don't copy more bytes than there is room for in the buffer */ + if (c > txroom) + c = txroom; + sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, txroom); + + /* Don't copy past the end of the hardware transmit buffer */ + if (c > 0x100 - tx_ip) + c = 0x100 - tx_ip; + + sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, 0x100 - tx_ip); + + /* Don't copy pas the end of the source buffer */ + if (c > SERIAL_XMIT_SIZE - port->gs.xmit_tail) + c = SERIAL_XMIT_SIZE - port->gs.xmit_tail; + + sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%ld) \n", + c, SERIAL_XMIT_SIZE - port->gs.xmit_tail); + + /* If for one reason or another, we can't copy more data, we're + done! */ + if (c == 0) + break; + + memcpy_toio(port->board->base + CHAN_OFFSET(port, hi_txbuf) + + tx_ip, port->gs.xmit_buf + port->gs.xmit_tail, c); + + /* Update the pointer in the card */ + sx_write_channel_byte(port, hi_txipos, (tx_ip + c) & 0xff); + + /* Update the kernel buffer end */ + port->gs.xmit_tail = (port->gs.xmit_tail + c) & + (SERIAL_XMIT_SIZE - 1); + + /* This one last. (this is essential) + It would allow others to start putting more data into the + buffer! */ + port->gs.xmit_cnt -= c; + } + + if (port->gs.xmit_cnt == 0) { + sx_disable_tx_interrupts(port); + } + + if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { + tty_wakeup(port->gs.port.tty); + sx_dprintk(SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n", + port->gs.wakeup_chars); + } + + clear_bit(SX_PORT_TRANSMIT_LOCK, &port->locks); + func_exit(); +} + +/* Note the symmetry between receiving chars and transmitting them! + Note: The kernel should have implemented both a receive buffer and + a transmit buffer. */ + +/* Inlined: Called only once. Remove the inline when you add another call */ +static inline void sx_receive_chars(struct sx_port *port) +{ + int c; + int rx_op; + struct tty_struct *tty; + int copied = 0; + unsigned char *rp; + + func_enter2(); + tty = port->gs.port.tty; + while (1) { + rx_op = sx_read_channel_byte(port, hi_rxopos); + c = (sx_read_channel_byte(port, hi_rxipos) - rx_op) & 0xff; + + sx_dprintk(SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c); + + /* Don't copy past the end of the hardware receive buffer */ + if (rx_op + c > 0x100) + c = 0x100 - rx_op; + + sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c); + + /* Don't copy more bytes than there is room for in the buffer */ + + c = tty_prepare_flip_string(tty, &rp, c); + + sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c); + + /* If for one reason or another, we can't copy more data, we're done! */ + if (c == 0) + break; + + sx_dprintk(SX_DEBUG_RECEIVE, "Copying over %d chars. First is " + "%d at %lx\n", c, read_sx_byte(port->board, + CHAN_OFFSET(port, hi_rxbuf) + rx_op), + CHAN_OFFSET(port, hi_rxbuf)); + memcpy_fromio(rp, port->board->base + + CHAN_OFFSET(port, hi_rxbuf) + rx_op, c); + + /* This one last. ( Not essential.) + It allows the card to start putting more data into the + buffer! + Update the pointer in the card */ + sx_write_channel_byte(port, hi_rxopos, (rx_op + c) & 0xff); + + copied += c; + } + if (copied) { + struct timeval tv; + + do_gettimeofday(&tv); + sx_dprintk(SX_DEBUG_RECEIVE, "pushing flipq port %d (%3d " + "chars): %d.%06d (%d/%d)\n", port->line, + copied, (int)(tv.tv_sec % 60), (int)tv.tv_usec, + tty->raw, tty->real_raw); + + /* Tell the rest of the system the news. Great news. New + characters! */ + tty_flip_buffer_push(tty); + /* tty_schedule_flip (tty); */ + } + + func_exit(); +} + +/* Inlined: it is called only once. Remove the inline if you add another + call */ +static inline void sx_check_modem_signals(struct sx_port *port) +{ + int hi_state; + int c_dcd; + + hi_state = sx_read_channel_byte(port, hi_state); + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n", + port->c_dcd, tty_port_carrier_raised(&port->gs.port)); + + if (hi_state & ST_BREAK) { + hi_state &= ~ST_BREAK; + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a break.\n"); + sx_write_channel_byte(port, hi_state, hi_state); + gs_got_break(&port->gs); + } + if (hi_state & ST_DCD) { + hi_state &= ~ST_DCD; + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n"); + sx_write_channel_byte(port, hi_state, hi_state); + c_dcd = tty_port_carrier_raised(&port->gs.port); + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd); + if (c_dcd != port->c_dcd) { + port->c_dcd = c_dcd; + if (tty_port_carrier_raised(&port->gs.port)) { + /* DCD went UP */ + if ((sx_read_channel_byte(port, hi_hstat) != + HS_IDLE_CLOSED) && + !(port->gs.port.tty->termios-> + c_cflag & CLOCAL)) { + /* Are we blocking in open? */ + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " + "active, unblocking open\n"); + wake_up_interruptible(&port->gs.port. + open_wait); + } else { + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " + "raised. Ignoring.\n"); + } + } else { + /* DCD went down! */ + if (!(port->gs.port.tty->termios->c_cflag & CLOCAL)){ + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " + "dropped. hanging up....\n"); + tty_hangup(port->gs.port.tty); + } else { + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " + "dropped. ignoring.\n"); + } + } + } else { + sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Hmmm. card told us " + "DCD changed, but it didn't.\n"); + } + } +} + +/* This is what an interrupt routine should look like. + * Small, elegant, clear. + */ + +static irqreturn_t sx_interrupt(int irq, void *ptr) +{ + struct sx_board *board = ptr; + struct sx_port *port; + int i; + + func_enter(); + sx_dprintk(SX_DEBUG_FLOW, "sx: enter sx_interrupt (%d/%d)\n", irq, + board->irq); + + /* AAargh! The order in which to do these things is essential and + not trivial. + + - Rate limit goes before "recursive". Otherwise a series of + recursive calls will hang the machine in the interrupt routine. + + - hardware twiddling goes before "recursive". Otherwise when we + poll the card, and a recursive interrupt happens, we won't + ack the card, so it might keep on interrupting us. (especially + level sensitive interrupt systems like PCI). + + - Rate limit goes before hardware twiddling. Otherwise we won't + catch a card that has gone bonkers. + + - The "initialized" test goes after the hardware twiddling. Otherwise + the card will stick us in the interrupt routine again. + + - The initialized test goes before recursive. + */ + +#ifdef IRQ_RATE_LIMIT + /* Aaargh! I'm ashamed. This costs more lines-of-code than the + actual interrupt routine!. (Well, used to when I wrote that + comment) */ + { + static int lastjif; + static int nintr = 0; + + if (lastjif == jiffies) { + if (++nintr > IRQ_RATE_LIMIT) { + free_irq(board->irq, board); + printk(KERN_ERR "sx: Too many interrupts. " + "Turning off interrupt %d.\n", + board->irq); + } + } else { + lastjif = jiffies; + nintr = 0; + } + } +#endif + + if (board->irq == irq) { + /* Tell the card we've noticed the interrupt. */ + + sx_write_board_word(board, cc_int_pending, 0); + if (IS_SX_BOARD(board)) { + write_sx_byte(board, SX_RESET_IRQ, 1); + } else if (IS_EISA_BOARD(board)) { + inb(board->eisa_base + 0xc03); + write_sx_word(board, 8, 0); + } else { + write_sx_byte(board, SI2_ISA_INTCLEAR, + SI2_ISA_INTCLEAR_CLEAR); + write_sx_byte(board, SI2_ISA_INTCLEAR, + SI2_ISA_INTCLEAR_SET); + } + } + + if (!sx_initialized) + return IRQ_HANDLED; + if (!(board->flags & SX_BOARD_INITIALIZED)) + return IRQ_HANDLED; + + if (test_and_set_bit(SX_BOARD_INTR_LOCK, &board->locks)) { + printk(KERN_ERR "Recursive interrupt! (%d)\n", board->irq); + return IRQ_HANDLED; + } + + for (i = 0; i < board->nports; i++) { + port = &board->ports[i]; + if (port->gs.port.flags & GS_ACTIVE) { + if (sx_read_channel_byte(port, hi_state)) { + sx_dprintk(SX_DEBUG_INTERRUPTS, "Port %d: " + "modem signal change?... \n",i); + sx_check_modem_signals(port); + } + if (port->gs.xmit_cnt) { + sx_transmit_chars(port); + } + if (!(port->gs.port.flags & SX_RX_THROTTLE)) { + sx_receive_chars(port); + } + } + } + + clear_bit(SX_BOARD_INTR_LOCK, &board->locks); + + sx_dprintk(SX_DEBUG_FLOW, "sx: exit sx_interrupt (%d/%d)\n", irq, + board->irq); + func_exit(); + return IRQ_HANDLED; +} + +static void sx_pollfunc(unsigned long data) +{ + struct sx_board *board = (struct sx_board *)data; + + func_enter(); + + sx_interrupt(0, board); + + mod_timer(&board->timer, jiffies + sx_poll); + func_exit(); +} + +/* ********************************************************************** * + * Here are the routines that actually * + * interface with the generic_serial driver * + * ********************************************************************** */ + +/* Ehhm. I don't know how to fiddle with interrupts on the SX card. --REW */ +/* Hmm. Ok I figured it out. You don't. */ + +static void sx_disable_tx_interrupts(void *ptr) +{ + struct sx_port *port = ptr; + func_enter2(); + + port->gs.port.flags &= ~GS_TX_INTEN; + + func_exit(); +} + +static void sx_enable_tx_interrupts(void *ptr) +{ + struct sx_port *port = ptr; + int data_in_buffer; + func_enter2(); + + /* First transmit the characters that we're supposed to */ + sx_transmit_chars(port); + + /* The sx card will never interrupt us if we don't fill the buffer + past 25%. So we keep considering interrupts off if that's the case. */ + data_in_buffer = (sx_read_channel_byte(port, hi_txipos) - + sx_read_channel_byte(port, hi_txopos)) & 0xff; + + /* XXX Must be "HIGH_WATER" for SI card according to doc. */ + if (data_in_buffer < LOW_WATER) + port->gs.port.flags &= ~GS_TX_INTEN; + + func_exit(); +} + +static void sx_disable_rx_interrupts(void *ptr) +{ + /* struct sx_port *port = ptr; */ + func_enter(); + + func_exit(); +} + +static void sx_enable_rx_interrupts(void *ptr) +{ + /* struct sx_port *port = ptr; */ + func_enter(); + + func_exit(); +} + +/* Jeez. Isn't this simple? */ +static int sx_carrier_raised(struct tty_port *port) +{ + struct sx_port *sp = container_of(port, struct sx_port, gs.port); + return ((sx_read_channel_byte(sp, hi_ip) & IP_DCD) != 0); +} + +/* Jeez. Isn't this simple? */ +static int sx_chars_in_buffer(void *ptr) +{ + struct sx_port *port = ptr; + func_enter2(); + + func_exit(); + return ((sx_read_channel_byte(port, hi_txipos) - + sx_read_channel_byte(port, hi_txopos)) & 0xff); +} + +static void sx_shutdown_port(void *ptr) +{ + struct sx_port *port = ptr; + + func_enter(); + + port->gs.port.flags &= ~GS_ACTIVE; + if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { + sx_setsignals(port, 0, 0); + sx_reconfigure_port(port); + } + + func_exit(); +} + +/* ********************************************************************** * + * Here are the routines that actually * + * interface with the rest of the system * + * ********************************************************************** */ + +static int sx_open(struct tty_struct *tty, struct file *filp) +{ + struct sx_port *port; + int retval, line; + unsigned long flags; + + func_enter(); + + if (!sx_initialized) { + return -EIO; + } + + line = tty->index; + sx_dprintk(SX_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p, " + "np=%d)\n", task_pid_nr(current), line, tty, + current->signal->tty, sx_nports); + + if ((line < 0) || (line >= SX_NPORTS) || (line >= sx_nports)) + return -ENODEV; + + port = &sx_ports[line]; + port->c_dcd = 0; /* Make sure that the first interrupt doesn't detect a + 1 -> 0 transition. */ + + sx_dprintk(SX_DEBUG_OPEN, "port = %p c_dcd = %d\n", port, port->c_dcd); + + spin_lock_irqsave(&port->gs.driver_lock, flags); + + tty->driver_data = port; + port->gs.port.tty = tty; + port->gs.port.count++; + spin_unlock_irqrestore(&port->gs.driver_lock, flags); + + sx_dprintk(SX_DEBUG_OPEN, "starting port\n"); + + /* + * Start up serial port + */ + retval = gs_init_port(&port->gs); + sx_dprintk(SX_DEBUG_OPEN, "done gs_init\n"); + if (retval) { + port->gs.port.count--; + return retval; + } + + port->gs.port.flags |= GS_ACTIVE; + if (port->gs.port.count <= 1) + sx_setsignals(port, 1, 1); + +#if 0 + if (sx_debug & SX_DEBUG_OPEN) + my_hd(port, sizeof(*port)); +#else + if (sx_debug & SX_DEBUG_OPEN) + my_hd_io(port->board->base + port->ch_base, sizeof(*port)); +#endif + + if (port->gs.port.count <= 1) { + if (sx_send_command(port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) { + printk(KERN_ERR "sx: Card didn't respond to LOPEN " + "command.\n"); + spin_lock_irqsave(&port->gs.driver_lock, flags); + port->gs.port.count--; + spin_unlock_irqrestore(&port->gs.driver_lock, flags); + return -EIO; + } + } + + retval = gs_block_til_ready(port, filp); + sx_dprintk(SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n", + retval, port->gs.port.count); + + if (retval) { +/* + * Don't lower gs.port.count here because sx_close() will be called later + */ + + return retval; + } + /* tty->low_latency = 1; */ + + port->c_dcd = sx_carrier_raised(&port->gs.port); + sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd); + + func_exit(); + return 0; + +} + +static void sx_close(void *ptr) +{ + struct sx_port *port = ptr; + /* Give the port 5 seconds to close down. */ + int to = 5 * HZ; + + func_enter(); + + sx_setsignals(port, 0, 0); + sx_reconfigure_port(port); + sx_send_command(port, HS_CLOSE, 0, 0); + + while (to-- && (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED)) + if (msleep_interruptible(10)) + break; + if (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) { + if (sx_send_command(port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED) + != 1) { + printk(KERN_ERR "sx: sent the force_close command, but " + "card didn't react\n"); + } else + sx_dprintk(SX_DEBUG_CLOSE, "sent the force_close " + "command.\n"); + } + + sx_dprintk(SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n", + 5 * HZ - to - 1, port->gs.port.count); + + if (port->gs.port.count) { + sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n", + port->gs.port.count); + /*printk("%s SETTING port count to zero: %p count: %d\n", + __func__, port, port->gs.port.count); + port->gs.port.count = 0;*/ + } + + func_exit(); +} + +/* This is relatively thorough. But then again it is only 20 lines. */ +#define MARCHUP for (i = min; i < max; i++) +#define MARCHDOWN for (i = max - 1; i >= min; i--) +#define W0 write_sx_byte(board, i, 0x55) +#define W1 write_sx_byte(board, i, 0xaa) +#define R0 if (read_sx_byte(board, i) != 0x55) return 1 +#define R1 if (read_sx_byte(board, i) != 0xaa) return 1 + +/* This memtest takes a human-noticable time. You normally only do it + once a boot, so I guess that it is worth it. */ +static int do_memtest(struct sx_board *board, int min, int max) +{ + int i; + + /* This is a marchb. Theoretically, marchb catches much more than + simpler tests. In practise, the longer test just catches more + intermittent errors. -- REW + (For the theory behind memory testing see: + Testing Semiconductor Memories by A.J. van de Goor.) */ + MARCHUP { + W0; + } + MARCHUP { + R0; + W1; + R1; + W0; + R0; + W1; + } + MARCHUP { + R1; + W0; + W1; + } + MARCHDOWN { + R1; + W0; + W1; + W0; + } + MARCHDOWN { + R0; + W1; + W0; + } + + return 0; +} + +#undef MARCHUP +#undef MARCHDOWN +#undef W0 +#undef W1 +#undef R0 +#undef R1 + +#define MARCHUP for (i = min; i < max; i += 2) +#define MARCHDOWN for (i = max - 1; i >= min; i -= 2) +#define W0 write_sx_word(board, i, 0x55aa) +#define W1 write_sx_word(board, i, 0xaa55) +#define R0 if (read_sx_word(board, i) != 0x55aa) return 1 +#define R1 if (read_sx_word(board, i) != 0xaa55) return 1 + +#if 0 +/* This memtest takes a human-noticable time. You normally only do it + once a boot, so I guess that it is worth it. */ +static int do_memtest_w(struct sx_board *board, int min, int max) +{ + int i; + + MARCHUP { + W0; + } + MARCHUP { + R0; + W1; + R1; + W0; + R0; + W1; + } + MARCHUP { + R1; + W0; + W1; + } + MARCHDOWN { + R1; + W0; + W1; + W0; + } + MARCHDOWN { + R0; + W1; + W0; + } + + return 0; +} +#endif + +static long sx_fw_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + long rc = 0; + int __user *descr = (int __user *)arg; + int i; + static struct sx_board *board = NULL; + int nbytes, offset; + unsigned long data; + char *tmp; + + func_enter(); + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + tty_lock(); + + sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg); + + if (!board) + board = &boards[0]; + if (board->flags & SX_BOARD_PRESENT) { + sx_dprintk(SX_DEBUG_FIRMWARE, "Board present! (%x)\n", + board->flags); + } else { + sx_dprintk(SX_DEBUG_FIRMWARE, "Board not present! (%x) all:", + board->flags); + for (i = 0; i < SX_NBOARDS; i++) + sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags); + sx_dprintk(SX_DEBUG_FIRMWARE, "\n"); + rc = -EIO; + goto out; + } + + switch (cmd) { + case SXIO_SET_BOARD: + sx_dprintk(SX_DEBUG_FIRMWARE, "set board to %ld\n", arg); + rc = -EIO; + if (arg >= SX_NBOARDS) + break; + sx_dprintk(SX_DEBUG_FIRMWARE, "not out of range\n"); + if (!(boards[arg].flags & SX_BOARD_PRESENT)) + break; + sx_dprintk(SX_DEBUG_FIRMWARE, ".. and present!\n"); + board = &boards[arg]; + rc = 0; + /* FIXME: And this does ... nothing?? */ + break; + case SXIO_GET_TYPE: + rc = -ENOENT; /* If we manage to miss one, return error. */ + if (IS_SX_BOARD(board)) + rc = SX_TYPE_SX; + if (IS_CF_BOARD(board)) + rc = SX_TYPE_CF; + if (IS_SI_BOARD(board)) + rc = SX_TYPE_SI; + if (IS_SI1_BOARD(board)) + rc = SX_TYPE_SI; + if (IS_EISA_BOARD(board)) + rc = SX_TYPE_SI; + sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc); + break; + case SXIO_DO_RAMTEST: + if (sx_initialized) { /* Already initialized: better not ramtest the board. */ + rc = -EPERM; + break; + } + if (IS_SX_BOARD(board)) { + rc = do_memtest(board, 0, 0x7000); + if (!rc) + rc = do_memtest(board, 0, 0x7000); + /*if (!rc) rc = do_memtest_w (board, 0, 0x7000); */ + } else { + rc = do_memtest(board, 0, 0x7ff8); + /* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */ + } + sx_dprintk(SX_DEBUG_FIRMWARE, + "returning memtest result= %ld\n", rc); + break; + case SXIO_DOWNLOAD: + if (sx_initialized) {/* Already initialized */ + rc = -EEXIST; + break; + } + if (!sx_reset(board)) { + rc = -EIO; + break; + } + sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); + + tmp = kmalloc(SX_CHUNK_SIZE, GFP_USER); + if (!tmp) { + rc = -ENOMEM; + break; + } + /* FIXME: check returns */ + get_user(nbytes, descr++); + get_user(offset, descr++); + get_user(data, descr++); + while (nbytes && data) { + for (i = 0; i < nbytes; i += SX_CHUNK_SIZE) { + if (copy_from_user(tmp, (char __user *)data + i, + (i + SX_CHUNK_SIZE > nbytes) ? + nbytes - i : SX_CHUNK_SIZE)) { + kfree(tmp); + rc = -EFAULT; + goto out; + } + memcpy_toio(board->base2 + offset + i, tmp, + (i + SX_CHUNK_SIZE > nbytes) ? + nbytes - i : SX_CHUNK_SIZE); + } + + get_user(nbytes, descr++); + get_user(offset, descr++); + get_user(data, descr++); + } + kfree(tmp); + sx_nports += sx_init_board(board); + rc = sx_nports; + break; + case SXIO_INIT: + if (sx_initialized) { /* Already initialized */ + rc = -EEXIST; + break; + } + /* This is not allowed until all boards are initialized... */ + for (i = 0; i < SX_NBOARDS; i++) { + if ((boards[i].flags & SX_BOARD_PRESENT) && + !(boards[i].flags & SX_BOARD_INITIALIZED)) { + rc = -EIO; + break; + } + } + for (i = 0; i < SX_NBOARDS; i++) + if (!(boards[i].flags & SX_BOARD_PRESENT)) + break; + + sx_dprintk(SX_DEBUG_FIRMWARE, "initing portstructs, %d boards, " + "%d channels, first board: %d ports\n", + i, sx_nports, boards[0].nports); + rc = sx_init_portstructs(i, sx_nports); + sx_init_drivers(); + if (rc >= 0) + sx_initialized++; + break; + case SXIO_SETDEBUG: + sx_debug = arg; + break; + case SXIO_GETDEBUG: + rc = sx_debug; + break; + case SXIO_GETGSDEBUG: + case SXIO_SETGSDEBUG: + rc = -EINVAL; + break; + case SXIO_GETNPORTS: + rc = sx_nports; + break; + default: + rc = -ENOTTY; + break; + } +out: + tty_unlock(); + func_exit(); + return rc; +} + +static int sx_break(struct tty_struct *tty, int flag) +{ + struct sx_port *port = tty->driver_data; + int rv; + + func_enter(); + tty_lock(); + + if (flag) + rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK); + else + rv = sx_send_command(port, HS_STOP, -1, HS_IDLE_OPEN); + if (rv != 1) + printk(KERN_ERR "sx: couldn't send break (%x).\n", + read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat))); + tty_unlock(); + func_exit(); + return 0; +} + +static int sx_tiocmget(struct tty_struct *tty) +{ + struct sx_port *port = tty->driver_data; + return sx_getsignals(port); +} + +static int sx_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct sx_port *port = tty->driver_data; + int rts = -1, dtr = -1; + + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + + sx_setsignals(port, dtr, rts); + sx_reconfigure_port(port); + return 0; +} + +static int sx_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + int rc; + struct sx_port *port = tty->driver_data; + void __user *argp = (void __user *)arg; + + /* func_enter2(); */ + + rc = 0; + tty_lock(); + switch (cmd) { + case TIOCGSERIAL: + rc = gs_getserial(&port->gs, argp); + break; + case TIOCSSERIAL: + rc = gs_setserial(&port->gs, argp); + break; + default: + rc = -ENOIOCTLCMD; + break; + } + tty_unlock(); + + /* func_exit(); */ + return rc; +} + +/* The throttle/unthrottle scheme for the Specialix card is different + * from other drivers and deserves some explanation. + * The Specialix hardware takes care of XON/XOFF + * and CTS/RTS flow control itself. This means that all we have to + * do when signalled by the upper tty layer to throttle/unthrottle is + * to make a note of it here. When we come to read characters from the + * rx buffers on the card (sx_receive_chars()) we look to see if the + * upper layer can accept more (as noted here in sx_rx_throt[]). + * If it can't we simply don't remove chars from the cards buffer. + * When the tty layer can accept chars, we again note that here and when + * sx_receive_chars() is called it will remove them from the cards buffer. + * The card will notice that a ports buffer has drained below some low + * water mark and will unflow control the line itself, using whatever + * flow control scheme is in use for that port. -- Simon Allen + */ + +static void sx_throttle(struct tty_struct *tty) +{ + struct sx_port *port = tty->driver_data; + + func_enter2(); + /* If the port is using any type of input flow + * control then throttle the port. + */ + if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) { + port->gs.port.flags |= SX_RX_THROTTLE; + } + func_exit(); +} + +static void sx_unthrottle(struct tty_struct *tty) +{ + struct sx_port *port = tty->driver_data; + + func_enter2(); + /* Always unthrottle even if flow control is not enabled on + * this port in case we disabled flow control while the port + * was throttled + */ + port->gs.port.flags &= ~SX_RX_THROTTLE; + func_exit(); + return; +} + +/* ********************************************************************** * + * Here are the initialization routines. * + * ********************************************************************** */ + +static int sx_init_board(struct sx_board *board) +{ + int addr; + int chans; + int type; + + func_enter(); + + /* This is preceded by downloading the download code. */ + + board->flags |= SX_BOARD_INITIALIZED; + + if (read_sx_byte(board, 0)) + /* CF boards may need this. */ + write_sx_byte(board, 0, 0); + + /* This resets the processor again, to make sure it didn't do any + foolish things while we were downloading the image */ + if (!sx_reset(board)) + return 0; + + sx_start_board(board); + udelay(10); + if (!sx_busy_wait_neq(board, 0, 0xff, 0)) { + printk(KERN_ERR "sx: Ooops. Board won't initialize.\n"); + return 0; + } + + /* Ok. So now the processor on the card is running. It gathered + some info for us... */ + sx_dprintk(SX_DEBUG_INIT, "The sxcard structure:\n"); + if (sx_debug & SX_DEBUG_INIT) + my_hd_io(board->base, 0x10); + sx_dprintk(SX_DEBUG_INIT, "the first sx_module structure:\n"); + if (sx_debug & SX_DEBUG_INIT) + my_hd_io(board->base + 0x80, 0x30); + + sx_dprintk(SX_DEBUG_INIT, "init_status: %x, %dk memory, firmware " + "V%x.%02x,\n", + read_sx_byte(board, 0), read_sx_byte(board, 1), + read_sx_byte(board, 5), read_sx_byte(board, 4)); + + if (read_sx_byte(board, 0) == 0xff) { + printk(KERN_INFO "sx: No modules found. Sorry.\n"); + board->nports = 0; + return 0; + } + + chans = 0; + + if (IS_SX_BOARD(board)) { + sx_write_board_word(board, cc_int_count, sx_maxints); + } else { + if (sx_maxints) + sx_write_board_word(board, cc_int_count, + SI_PROCESSOR_CLOCK / 8 / sx_maxints); + } + + /* grab the first module type... */ + /* board->ta_type = mod_compat_type (read_sx_byte (board, 0x80 + 0x08)); */ + board->ta_type = mod_compat_type(sx_read_module_byte(board, 0x80, + mc_chip)); + + /* XXX byteorder */ + for (addr = 0x80; addr != 0; addr = read_sx_word(board, addr) & 0x7fff){ + type = sx_read_module_byte(board, addr, mc_chip); + sx_dprintk(SX_DEBUG_INIT, "Module at %x: %d channels\n", + addr, read_sx_byte(board, addr + 2)); + + chans += sx_read_module_byte(board, addr, mc_type); + + sx_dprintk(SX_DEBUG_INIT, "module is an %s, which has %s/%s " + "panels\n", + mod_type_s(type), + pan_type_s(sx_read_module_byte(board, addr, + mc_mods) & 0xf), + pan_type_s(sx_read_module_byte(board, addr, + mc_mods) >> 4)); + + sx_dprintk(SX_DEBUG_INIT, "CD1400 versions: %x/%x, ASIC " + "version: %x\n", + sx_read_module_byte(board, addr, mc_rev1), + sx_read_module_byte(board, addr, mc_rev2), + sx_read_module_byte(board, addr, mc_mtaasic_rev)); + + /* The following combinations are illegal: It should theoretically + work, but timing problems make the bus HANG. */ + + if (mod_compat_type(type) != board->ta_type) { + printk(KERN_ERR "sx: This is an invalid " + "configuration.\nDon't mix TA/MTA/SXDC on the " + "same hostadapter.\n"); + chans = 0; + break; + } + if ((IS_EISA_BOARD(board) || + IS_SI_BOARD(board)) && + (mod_compat_type(type) == 4)) { + printk(KERN_ERR "sx: This is an invalid " + "configuration.\nDon't use SXDCs on an SI/XIO " + "adapter.\n"); + chans = 0; + break; + } +#if 0 /* Problem fixed: firmware 3.05 */ + if (IS_SX_BOARD(board) && (type == TA8)) { + /* There are some issues with the firmware and the DCD/RTS + lines. It might work if you tie them together or something. + It might also work if you get a newer sx_firmware. Therefore + this is just a warning. */ + printk(KERN_WARNING + "sx: The SX host doesn't work too well " + "with the TA8 adapters.\nSpecialix is working on it.\n"); + } +#endif + } + + if (chans) { + if (board->irq > 0) { + /* fixed irq, probably PCI */ + if (sx_irqmask & (1 << board->irq)) { /* may we use this irq? */ + if (request_irq(board->irq, sx_interrupt, + IRQF_SHARED | IRQF_DISABLED, + "sx", board)) { + printk(KERN_ERR "sx: Cannot allocate " + "irq %d.\n", board->irq); + board->irq = 0; + } + } else + board->irq = 0; + } else if (board->irq < 0 && sx_irqmask) { + /* auto-allocate irq */ + int irqnr; + int irqmask = sx_irqmask & (IS_SX_BOARD(board) ? + SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK); + for (irqnr = 15; irqnr > 0; irqnr--) + if (irqmask & (1 << irqnr)) + if (!request_irq(irqnr, sx_interrupt, + IRQF_SHARED | IRQF_DISABLED, + "sx", board)) + break; + if (!irqnr) + printk(KERN_ERR "sx: Cannot allocate IRQ.\n"); + board->irq = irqnr; + } else + board->irq = 0; + + if (board->irq) { + /* Found a valid interrupt, start up interrupts! */ + sx_dprintk(SX_DEBUG_INIT, "Using irq %d.\n", + board->irq); + sx_start_interrupts(board); + board->poll = sx_slowpoll; + board->flags |= SX_IRQ_ALLOCATED; + } else { + /* no irq: setup board for polled operation */ + board->poll = sx_poll; + sx_dprintk(SX_DEBUG_INIT, "Using poll-interval %d.\n", + board->poll); + } + + /* The timer should be initialized anyway: That way we can + safely del_timer it when the module is unloaded. */ + setup_timer(&board->timer, sx_pollfunc, (unsigned long)board); + + if (board->poll) + mod_timer(&board->timer, jiffies + board->poll); + } else { + board->irq = 0; + } + + board->nports = chans; + sx_dprintk(SX_DEBUG_INIT, "returning %d ports.", board->nports); + + func_exit(); + return chans; +} + +static void __devinit printheader(void) +{ + static int header_printed; + + if (!header_printed) { + printk(KERN_INFO "Specialix SX driver " + "(C) 1998/1999 R.E.Wolff@BitWizard.nl\n"); + printk(KERN_INFO "sx: version " __stringify(SX_VERSION) "\n"); + header_printed = 1; + } +} + +static int __devinit probe_sx(struct sx_board *board) +{ + struct vpd_prom vpdp; + char *p; + int i; + + func_enter(); + + if (!IS_CF_BOARD(board)) { + sx_dprintk(SX_DEBUG_PROBE, "Going to verify vpd prom at %p.\n", + board->base + SX_VPD_ROM); + + if (sx_debug & SX_DEBUG_PROBE) + my_hd_io(board->base + SX_VPD_ROM, 0x40); + + p = (char *)&vpdp; + for (i = 0; i < sizeof(struct vpd_prom); i++) + *p++ = read_sx_byte(board, SX_VPD_ROM + i * 2); + + if (sx_debug & SX_DEBUG_PROBE) + my_hd(&vpdp, 0x20); + + sx_dprintk(SX_DEBUG_PROBE, "checking identifier...\n"); + + if (strncmp(vpdp.identifier, SX_VPD_IDENT_STRING, 16) != 0) { + sx_dprintk(SX_DEBUG_PROBE, "Got non-SX identifier: " + "'%s'\n", vpdp.identifier); + return 0; + } + } + + printheader(); + + if (!IS_CF_BOARD(board)) { + printk(KERN_DEBUG "sx: Found an SX board at %lx\n", + board->hw_base); + printk(KERN_DEBUG "sx: hw_rev: %d, assembly level: %d, " + "uniq ID:%08x, ", + vpdp.hwrev, vpdp.hwass, vpdp.uniqid); + printk("Manufactured: %d/%d\n", 1970 + vpdp.myear, vpdp.mweek); + + if ((((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) != + SX_PCI_UNIQUEID1) && (((vpdp.uniqid >> 24) & + SX_UNIQUEID_MASK) != SX_ISA_UNIQUEID1)) { + /* This might be a bit harsh. This was the primary + reason the SX/ISA card didn't work at first... */ + printk(KERN_ERR "sx: Hmm. Not an SX/PCI or SX/ISA " + "card. Sorry: giving up.\n"); + return (0); + } + + if (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) == + SX_ISA_UNIQUEID1) { + if (((unsigned long)board->hw_base) & 0x8000) { + printk(KERN_WARNING "sx: Warning: There may be " + "hardware problems with the card at " + "%lx.\n", board->hw_base); + printk(KERN_WARNING "sx: Read sx.txt for more " + "info.\n"); + } + } + } + + board->nports = -1; + + /* This resets the processor, and keeps it off the bus. */ + if (!sx_reset(board)) + return 0; + sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); + + func_exit(); + return 1; +} + +#if defined(CONFIG_ISA) || defined(CONFIG_EISA) + +/* Specialix probes for this card at 32k increments from 640k to 16M. + I consider machines with less than 16M unlikely nowadays, so I'm + not probing above 1Mb. Also, 0xa0000, 0xb0000, are taken by the VGA + card. 0xe0000 and 0xf0000 are taken by the BIOS. That only leaves + 0xc0000, 0xc8000, 0xd0000 and 0xd8000 . */ + +static int __devinit probe_si(struct sx_board *board) +{ + int i; + + func_enter(); + sx_dprintk(SX_DEBUG_PROBE, "Going to verify SI signature hw %lx at " + "%p.\n", board->hw_base, board->base + SI2_ISA_ID_BASE); + + if (sx_debug & SX_DEBUG_PROBE) + my_hd_io(board->base + SI2_ISA_ID_BASE, 0x8); + + if (!IS_EISA_BOARD(board)) { + if (IS_SI1_BOARD(board)) { + for (i = 0; i < 8; i++) { + write_sx_byte(board, SI2_ISA_ID_BASE + 7 - i,i); + } + } + for (i = 0; i < 8; i++) { + if ((read_sx_byte(board, SI2_ISA_ID_BASE + 7 - i) & 7) + != i) { + func_exit(); + return 0; + } + } + } + + /* Now we're pretty much convinced that there is an SI board here, + but to prevent trouble, we'd better double check that we don't + have an SI1 board when we're probing for an SI2 board.... */ + + write_sx_byte(board, SI2_ISA_ID_BASE, 0x10); + if (IS_SI1_BOARD(board)) { + /* This should be an SI1 board, which has this + location writable... */ + if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) { + func_exit(); + return 0; + } + } else { + /* This should be an SI2 board, which has the bottom + 3 bits non-writable... */ + if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) { + func_exit(); + return 0; + } + } + + /* Now we're pretty much convinced that there is an SI board here, + but to prevent trouble, we'd better double check that we don't + have an SI1 board when we're probing for an SI2 board.... */ + + write_sx_byte(board, SI2_ISA_ID_BASE, 0x10); + if (IS_SI1_BOARD(board)) { + /* This should be an SI1 board, which has this + location writable... */ + if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) { + func_exit(); + return 0; + } + } else { + /* This should be an SI2 board, which has the bottom + 3 bits non-writable... */ + if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) { + func_exit(); + return 0; + } + } + + printheader(); + + printk(KERN_DEBUG "sx: Found an SI board at %lx\n", board->hw_base); + /* Compared to the SX boards, it is a complete guess as to what + this card is up to... */ + + board->nports = -1; + + /* This resets the processor, and keeps it off the bus. */ + if (!sx_reset(board)) + return 0; + sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); + + func_exit(); + return 1; +} +#endif + +static const struct tty_operations sx_ops = { + .break_ctl = sx_break, + .open = sx_open, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .chars_in_buffer = gs_chars_in_buffer, + .flush_buffer = gs_flush_buffer, + .ioctl = sx_ioctl, + .throttle = sx_throttle, + .unthrottle = sx_unthrottle, + .set_termios = gs_set_termios, + .stop = gs_stop, + .start = gs_start, + .hangup = gs_hangup, + .tiocmget = sx_tiocmget, + .tiocmset = sx_tiocmset, +}; + +static const struct tty_port_operations sx_port_ops = { + .carrier_raised = sx_carrier_raised, +}; + +static int sx_init_drivers(void) +{ + int error; + + func_enter(); + + sx_driver = alloc_tty_driver(sx_nports); + if (!sx_driver) + return 1; + sx_driver->owner = THIS_MODULE; + sx_driver->driver_name = "specialix_sx"; + sx_driver->name = "ttyX"; + sx_driver->major = SX_NORMAL_MAJOR; + sx_driver->type = TTY_DRIVER_TYPE_SERIAL; + sx_driver->subtype = SERIAL_TYPE_NORMAL; + sx_driver->init_termios = tty_std_termios; + sx_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + sx_driver->init_termios.c_ispeed = 9600; + sx_driver->init_termios.c_ospeed = 9600; + sx_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(sx_driver, &sx_ops); + + if ((error = tty_register_driver(sx_driver))) { + put_tty_driver(sx_driver); + printk(KERN_ERR "sx: Couldn't register sx driver, error = %d\n", + error); + return 1; + } + func_exit(); + return 0; +} + +static int sx_init_portstructs(int nboards, int nports) +{ + struct sx_board *board; + struct sx_port *port; + int i, j; + int addr, chans; + int portno; + + func_enter(); + + /* Many drivers statically allocate the maximum number of ports + There is no reason not to allocate them dynamically. + Is there? -- REW */ + sx_ports = kcalloc(nports, sizeof(struct sx_port), GFP_KERNEL); + if (!sx_ports) + return -ENOMEM; + + port = sx_ports; + for (i = 0; i < nboards; i++) { + board = &boards[i]; + board->ports = port; + for (j = 0; j < boards[i].nports; j++) { + sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j); + tty_port_init(&port->gs.port); + port->gs.port.ops = &sx_port_ops; + port->gs.magic = SX_MAGIC; + port->gs.close_delay = HZ / 2; + port->gs.closing_wait = 30 * HZ; + port->board = board; + port->gs.rd = &sx_real_driver; +#ifdef NEW_WRITE_LOCKING + port->gs.port_write_mutex = MUTEX; +#endif + spin_lock_init(&port->gs.driver_lock); + /* + * Initializing wait queue + */ + port++; + } + } + + port = sx_ports; + portno = 0; + for (i = 0; i < nboards; i++) { + board = &boards[i]; + board->port_base = portno; + /* Possibly the configuration was rejected. */ + sx_dprintk(SX_DEBUG_PROBE, "Board has %d channels\n", + board->nports); + if (board->nports <= 0) + continue; + /* XXX byteorder ?? */ + for (addr = 0x80; addr != 0; + addr = read_sx_word(board, addr) & 0x7fff) { + chans = sx_read_module_byte(board, addr, mc_type); + sx_dprintk(SX_DEBUG_PROBE, "Module at %x: %d " + "channels\n", addr, chans); + sx_dprintk(SX_DEBUG_PROBE, "Port at"); + for (j = 0; j < chans; j++) { + /* The "sx-way" is the way it SHOULD be done. + That way in the future, the firmware may for + example pack the structures a bit more + efficient. Neil tells me it isn't going to + happen anytime soon though. */ + if (IS_SX_BOARD(board)) + port->ch_base = sx_read_module_word( + board, addr + j * 2, + mc_chan_pointer); + else + port->ch_base = addr + 0x100 + 0x300 *j; + + sx_dprintk(SX_DEBUG_PROBE, " %x", + port->ch_base); + port->line = portno++; + port++; + } + sx_dprintk(SX_DEBUG_PROBE, "\n"); + } + /* This has to be done earlier. */ + /* board->flags |= SX_BOARD_INITIALIZED; */ + } + + func_exit(); + return 0; +} + +static unsigned int sx_find_free_board(void) +{ + unsigned int i; + + for (i = 0; i < SX_NBOARDS; i++) + if (!(boards[i].flags & SX_BOARD_PRESENT)) + break; + + return i; +} + +static void __exit sx_release_drivers(void) +{ + func_enter(); + tty_unregister_driver(sx_driver); + put_tty_driver(sx_driver); + func_exit(); +} + +static void __devexit sx_remove_card(struct sx_board *board, + struct pci_dev *pdev) +{ + if (board->flags & SX_BOARD_INITIALIZED) { + /* The board should stop messing with us. (actually I mean the + interrupt) */ + sx_reset(board); + if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED)) + free_irq(board->irq, board); + + /* It is safe/allowed to del_timer a non-active timer */ + del_timer(&board->timer); + if (pdev) { +#ifdef CONFIG_PCI + iounmap(board->base2); + pci_release_region(pdev, IS_CF_BOARD(board) ? 3 : 2); +#endif + } else { + iounmap(board->base); + release_region(board->hw_base, board->hw_len); + } + + board->flags &= ~(SX_BOARD_INITIALIZED | SX_BOARD_PRESENT); + } +} + +#ifdef CONFIG_EISA + +static int __devinit sx_eisa_probe(struct device *dev) +{ + struct eisa_device *edev = to_eisa_device(dev); + struct sx_board *board; + unsigned long eisa_slot = edev->base_addr; + unsigned int i; + int retval = -EIO; + + mutex_lock(&sx_boards_lock); + i = sx_find_free_board(); + if (i == SX_NBOARDS) { + mutex_unlock(&sx_boards_lock); + goto err; + } + board = &boards[i]; + board->flags |= SX_BOARD_PRESENT; + mutex_unlock(&sx_boards_lock); + + dev_info(dev, "XIO : Signature found in EISA slot %lu, " + "Product %d Rev %d (REPORT THIS TO LKLM)\n", + eisa_slot >> 12, + inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 2), + inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 3)); + + board->eisa_base = eisa_slot; + board->flags &= ~SX_BOARD_TYPE; + board->flags |= SI_EISA_BOARD; + + board->hw_base = ((inb(eisa_slot + 0xc01) << 8) + + inb(eisa_slot + 0xc00)) << 16; + board->hw_len = SI2_EISA_WINDOW_LEN; + if (!request_region(board->hw_base, board->hw_len, "sx")) { + dev_err(dev, "can't request region\n"); + goto err_flag; + } + board->base2 = + board->base = ioremap_nocache(board->hw_base, SI2_EISA_WINDOW_LEN); + if (!board->base) { + dev_err(dev, "can't remap memory\n"); + goto err_reg; + } + + sx_dprintk(SX_DEBUG_PROBE, "IO hw_base address: %lx\n", board->hw_base); + sx_dprintk(SX_DEBUG_PROBE, "base: %p\n", board->base); + board->irq = inb(eisa_slot + 0xc02) >> 4; + sx_dprintk(SX_DEBUG_PROBE, "IRQ: %d\n", board->irq); + + if (!probe_si(board)) + goto err_unmap; + + dev_set_drvdata(dev, board); + + return 0; +err_unmap: + iounmap(board->base); +err_reg: + release_region(board->hw_base, board->hw_len); +err_flag: + board->flags &= ~SX_BOARD_PRESENT; +err: + return retval; +} + +static int __devexit sx_eisa_remove(struct device *dev) +{ + struct sx_board *board = dev_get_drvdata(dev); + + sx_remove_card(board, NULL); + + return 0; +} + +static struct eisa_device_id sx_eisa_tbl[] = { + { "SLX" }, + { "" } +}; + +MODULE_DEVICE_TABLE(eisa, sx_eisa_tbl); + +static struct eisa_driver sx_eisadriver = { + .id_table = sx_eisa_tbl, + .driver = { + .name = "sx", + .probe = sx_eisa_probe, + .remove = __devexit_p(sx_eisa_remove), + } +}; + +#endif + +#ifdef CONFIG_PCI + /******************************************************** + * Setting bit 17 in the CNTRL register of the PLX 9050 * + * chip forces a retry on writes while a read is pending.* + * This is to prevent the card locking up on Intel Xeon * + * multiprocessor systems with the NX chipset. -- NV * + ********************************************************/ + +/* Newer cards are produced with this bit set from the configuration + EEprom. As the bit is read/write for the CPU, we can fix it here, + if we detect that it isn't set correctly. -- REW */ + +static void __devinit fix_sx_pci(struct pci_dev *pdev, struct sx_board *board) +{ + unsigned int hwbase; + void __iomem *rebase; + unsigned int t; + +#define CNTRL_REG_OFFSET 0x50 +#define CNTRL_REG_GOODVALUE 0x18260000 + + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase); + hwbase &= PCI_BASE_ADDRESS_MEM_MASK; + rebase = ioremap_nocache(hwbase, 0x80); + t = readl(rebase + CNTRL_REG_OFFSET); + if (t != CNTRL_REG_GOODVALUE) { + printk(KERN_DEBUG "sx: performing cntrl reg fix: %08x -> " + "%08x\n", t, CNTRL_REG_GOODVALUE); + writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET); + } + iounmap(rebase); +} +#endif + +static int __devinit sx_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ +#ifdef CONFIG_PCI + struct sx_board *board; + unsigned int i, reg; + int retval = -EIO; + + mutex_lock(&sx_boards_lock); + i = sx_find_free_board(); + if (i == SX_NBOARDS) { + mutex_unlock(&sx_boards_lock); + goto err; + } + board = &boards[i]; + board->flags |= SX_BOARD_PRESENT; + mutex_unlock(&sx_boards_lock); + + retval = pci_enable_device(pdev); + if (retval) + goto err_flag; + + board->flags &= ~SX_BOARD_TYPE; + board->flags |= (pdev->subsystem_vendor == 0x200) ? SX_PCI_BOARD : + SX_CFPCI_BOARD; + + /* CF boards use base address 3.... */ + reg = IS_CF_BOARD(board) ? 3 : 2; + retval = pci_request_region(pdev, reg, "sx"); + if (retval) { + dev_err(&pdev->dev, "can't request region\n"); + goto err_flag; + } + board->hw_base = pci_resource_start(pdev, reg); + board->base2 = + board->base = ioremap_nocache(board->hw_base, WINDOW_LEN(board)); + if (!board->base) { + dev_err(&pdev->dev, "ioremap failed\n"); + goto err_reg; + } + + /* Most of the stuff on the CF board is offset by 0x18000 .... */ + if (IS_CF_BOARD(board)) + board->base += 0x18000; + + board->irq = pdev->irq; + + dev_info(&pdev->dev, "Got a specialix card: %p(%d) %x.\n", board->base, + board->irq, board->flags); + + if (!probe_sx(board)) { + retval = -EIO; + goto err_unmap; + } + + fix_sx_pci(pdev, board); + + pci_set_drvdata(pdev, board); + + return 0; +err_unmap: + iounmap(board->base2); +err_reg: + pci_release_region(pdev, reg); +err_flag: + board->flags &= ~SX_BOARD_PRESENT; +err: + return retval; +#else + return -ENODEV; +#endif +} + +static void __devexit sx_pci_remove(struct pci_dev *pdev) +{ + struct sx_board *board = pci_get_drvdata(pdev); + + sx_remove_card(board, pdev); +} + +/* Specialix has a whole bunch of cards with 0x2000 as the device ID. They say + its because the standard requires it. So check for SUBVENDOR_ID. */ +static struct pci_device_id sx_pci_tbl[] = { + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, + .subvendor = PCI_ANY_ID, .subdevice = 0x0200 }, + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, + .subvendor = PCI_ANY_ID, .subdevice = 0x0300 }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, sx_pci_tbl); + +static struct pci_driver sx_pcidriver = { + .name = "sx", + .id_table = sx_pci_tbl, + .probe = sx_pci_probe, + .remove = __devexit_p(sx_pci_remove) +}; + +static int __init sx_init(void) +{ +#ifdef CONFIG_EISA + int retval1; +#endif +#ifdef CONFIG_ISA + struct sx_board *board; + unsigned int i; +#endif + unsigned int found = 0; + int retval; + + func_enter(); + sx_dprintk(SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n", + sx_debug); + if (abs((long)(&sx_debug) - sx_debug) < 0x10000) { + printk(KERN_WARNING "sx: sx_debug is an address, instead of a " + "value. Assuming -1.\n(%p)\n", &sx_debug); + sx_debug = -1; + } + + if (misc_register(&sx_fw_device) < 0) { + printk(KERN_ERR "SX: Unable to register firmware loader " + "driver.\n"); + return -EIO; + } +#ifdef CONFIG_ISA + for (i = 0; i < NR_SX_ADDRS; i++) { + board = &boards[found]; + board->hw_base = sx_probe_addrs[i]; + board->hw_len = SX_WINDOW_LEN; + if (!request_region(board->hw_base, board->hw_len, "sx")) + continue; + board->base2 = + board->base = ioremap_nocache(board->hw_base, board->hw_len); + if (!board->base) + goto err_sx_reg; + board->flags &= ~SX_BOARD_TYPE; + board->flags |= SX_ISA_BOARD; + board->irq = sx_irqmask ? -1 : 0; + + if (probe_sx(board)) { + board->flags |= SX_BOARD_PRESENT; + found++; + } else { + iounmap(board->base); +err_sx_reg: + release_region(board->hw_base, board->hw_len); + } + } + + for (i = 0; i < NR_SI_ADDRS; i++) { + board = &boards[found]; + board->hw_base = si_probe_addrs[i]; + board->hw_len = SI2_ISA_WINDOW_LEN; + if (!request_region(board->hw_base, board->hw_len, "sx")) + continue; + board->base2 = + board->base = ioremap_nocache(board->hw_base, board->hw_len); + if (!board->base) + goto err_si_reg; + board->flags &= ~SX_BOARD_TYPE; + board->flags |= SI_ISA_BOARD; + board->irq = sx_irqmask ? -1 : 0; + + if (probe_si(board)) { + board->flags |= SX_BOARD_PRESENT; + found++; + } else { + iounmap(board->base); +err_si_reg: + release_region(board->hw_base, board->hw_len); + } + } + for (i = 0; i < NR_SI1_ADDRS; i++) { + board = &boards[found]; + board->hw_base = si1_probe_addrs[i]; + board->hw_len = SI1_ISA_WINDOW_LEN; + if (!request_region(board->hw_base, board->hw_len, "sx")) + continue; + board->base2 = + board->base = ioremap_nocache(board->hw_base, board->hw_len); + if (!board->base) + goto err_si1_reg; + board->flags &= ~SX_BOARD_TYPE; + board->flags |= SI1_ISA_BOARD; + board->irq = sx_irqmask ? -1 : 0; + + if (probe_si(board)) { + board->flags |= SX_BOARD_PRESENT; + found++; + } else { + iounmap(board->base); +err_si1_reg: + release_region(board->hw_base, board->hw_len); + } + } +#endif +#ifdef CONFIG_EISA + retval1 = eisa_driver_register(&sx_eisadriver); +#endif + retval = pci_register_driver(&sx_pcidriver); + + if (found) { + printk(KERN_INFO "sx: total of %d boards detected.\n", found); + retval = 0; + } else if (retval) { +#ifdef CONFIG_EISA + retval = retval1; + if (retval1) +#endif + misc_deregister(&sx_fw_device); + } + + func_exit(); + return retval; +} + +static void __exit sx_exit(void) +{ + int i; + + func_enter(); +#ifdef CONFIG_EISA + eisa_driver_unregister(&sx_eisadriver); +#endif + pci_unregister_driver(&sx_pcidriver); + + for (i = 0; i < SX_NBOARDS; i++) + sx_remove_card(&boards[i], NULL); + + if (misc_deregister(&sx_fw_device) < 0) { + printk(KERN_INFO "sx: couldn't deregister firmware loader " + "device\n"); + } + sx_dprintk(SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n", + sx_initialized); + if (sx_initialized) + sx_release_drivers(); + + kfree(sx_ports); + func_exit(); +} + +module_init(sx_init); +module_exit(sx_exit); diff --git a/drivers/staging/generic_serial/sx.h b/drivers/staging/generic_serial/sx.h new file mode 100644 index 000000000000..87c2defdead7 --- /dev/null +++ b/drivers/staging/generic_serial/sx.h @@ -0,0 +1,201 @@ + +/* + * sx.h + * + * Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl + * + * SX serial driver. + * -- Supports SI, XIO and SX host cards. + * -- Supports TAs, MTAs and SXDCs. + * + * Version 1.3 -- March, 1999. + * + */ + +#define SX_NBOARDS 4 +#define SX_PORTSPERBOARD 32 +#define SX_NPORTS (SX_NBOARDS * SX_PORTSPERBOARD) + +#ifdef __KERNEL__ + +#define SX_MAGIC 0x12345678 + +struct sx_port { + struct gs_port gs; + struct wait_queue *shutdown_wait; + int ch_base; + int c_dcd; + struct sx_board *board; + int line; + unsigned long locks; +}; + +struct sx_board { + int magic; + void __iomem *base; + void __iomem *base2; + unsigned long hw_base; + resource_size_t hw_len; + int eisa_base; + int port_base; /* Number of the first port */ + struct sx_port *ports; + int nports; + int flags; + int irq; + int poll; + int ta_type; + struct timer_list timer; + unsigned long locks; +}; + +struct vpd_prom { + unsigned short id; + char hwrev; + char hwass; + int uniqid; + char myear; + char mweek; + char hw_feature[5]; + char oem_id; + char identifier[16]; +}; + +#ifndef MOD_RS232DB25MALE +#define MOD_RS232DB25MALE 0x0a +#endif + +#define SI_ISA_BOARD 0x00000001 +#define SX_ISA_BOARD 0x00000002 +#define SX_PCI_BOARD 0x00000004 +#define SX_CFPCI_BOARD 0x00000008 +#define SX_CFISA_BOARD 0x00000010 +#define SI_EISA_BOARD 0x00000020 +#define SI1_ISA_BOARD 0x00000040 + +#define SX_BOARD_PRESENT 0x00001000 +#define SX_BOARD_INITIALIZED 0x00002000 +#define SX_IRQ_ALLOCATED 0x00004000 + +#define SX_BOARD_TYPE 0x000000ff + +#define IS_SX_BOARD(board) (board->flags & (SX_PCI_BOARD | SX_CFPCI_BOARD | \ + SX_ISA_BOARD | SX_CFISA_BOARD)) + +#define IS_SI_BOARD(board) (board->flags & SI_ISA_BOARD) +#define IS_SI1_BOARD(board) (board->flags & SI1_ISA_BOARD) + +#define IS_EISA_BOARD(board) (board->flags & SI_EISA_BOARD) + +#define IS_CF_BOARD(board) (board->flags & (SX_CFISA_BOARD | SX_CFPCI_BOARD)) + +/* The SI processor clock is required to calculate the cc_int_count register + value for the SI cards. */ +#define SI_PROCESSOR_CLOCK 25000000 + + +/* port flags */ +/* Make sure these don't clash with gs flags or async flags */ +#define SX_RX_THROTTLE 0x0000001 + + + +#define SX_PORT_TRANSMIT_LOCK 0 +#define SX_BOARD_INTR_LOCK 0 + + + +/* Debug flags. Add these together to get more debug info. */ + +#define SX_DEBUG_OPEN 0x00000001 +#define SX_DEBUG_SETTING 0x00000002 +#define SX_DEBUG_FLOW 0x00000004 +#define SX_DEBUG_MODEMSIGNALS 0x00000008 +#define SX_DEBUG_TERMIOS 0x00000010 +#define SX_DEBUG_TRANSMIT 0x00000020 +#define SX_DEBUG_RECEIVE 0x00000040 +#define SX_DEBUG_INTERRUPTS 0x00000080 +#define SX_DEBUG_PROBE 0x00000100 +#define SX_DEBUG_INIT 0x00000200 +#define SX_DEBUG_CLEANUP 0x00000400 +#define SX_DEBUG_CLOSE 0x00000800 +#define SX_DEBUG_FIRMWARE 0x00001000 +#define SX_DEBUG_MEMTEST 0x00002000 + +#define SX_DEBUG_ALL 0xffffffff + + +#define O_OTHER(tty) \ + ((O_OLCUC(tty)) ||\ + (O_ONLCR(tty)) ||\ + (O_OCRNL(tty)) ||\ + (O_ONOCR(tty)) ||\ + (O_ONLRET(tty)) ||\ + (O_OFILL(tty)) ||\ + (O_OFDEL(tty)) ||\ + (O_NLDLY(tty)) ||\ + (O_CRDLY(tty)) ||\ + (O_TABDLY(tty)) ||\ + (O_BSDLY(tty)) ||\ + (O_VTDLY(tty)) ||\ + (O_FFDLY(tty))) + +/* Same for input. */ +#define I_OTHER(tty) \ + ((I_INLCR(tty)) ||\ + (I_IGNCR(tty)) ||\ + (I_ICRNL(tty)) ||\ + (I_IUCLC(tty)) ||\ + (L_ISIG(tty))) + +#define MOD_TA ( TA>>4) +#define MOD_MTA (MTA_CD1400>>4) +#define MOD_SXDC ( SXDC>>4) + + +/* We copy the download code over to the card in chunks of ... bytes */ +#define SX_CHUNK_SIZE 128 + +#endif /* __KERNEL__ */ + + + +/* Specialix document 6210046-11 page 3 */ +#define SPX(X) (('S'<<24) | ('P' << 16) | (X)) + +/* Specialix-Linux specific IOCTLS. */ +#define SPXL(X) (SPX(('L' << 8) | (X))) + + +#define SXIO_SET_BOARD SPXL(0x01) +#define SXIO_GET_TYPE SPXL(0x02) +#define SXIO_DOWNLOAD SPXL(0x03) +#define SXIO_INIT SPXL(0x04) +#define SXIO_SETDEBUG SPXL(0x05) +#define SXIO_GETDEBUG SPXL(0x06) +#define SXIO_DO_RAMTEST SPXL(0x07) +#define SXIO_SETGSDEBUG SPXL(0x08) +#define SXIO_GETGSDEBUG SPXL(0x09) +#define SXIO_GETNPORTS SPXL(0x0a) + + +#ifndef SXCTL_MISC_MINOR +/* Allow others to gather this into "major.h" or something like that */ +#define SXCTL_MISC_MINOR 167 +#endif + +#ifndef SX_NORMAL_MAJOR +/* This allows overriding on the compiler commandline, or in a "major.h" + include or something like that */ +#define SX_NORMAL_MAJOR 32 +#define SX_CALLOUT_MAJOR 33 +#endif + + +#define SX_TYPE_SX 0x01 +#define SX_TYPE_SI 0x02 +#define SX_TYPE_CF 0x03 + + +#define WINDOW_LEN(board) (IS_CF_BOARD(board)?0x20000:SX_WINDOW_LEN) +/* Need a #define for ^^^^^^^ !!! */ + diff --git a/drivers/staging/generic_serial/sxboards.h b/drivers/staging/generic_serial/sxboards.h new file mode 100644 index 000000000000..427927dc7dbf --- /dev/null +++ b/drivers/staging/generic_serial/sxboards.h @@ -0,0 +1,206 @@ +/************************************************************************/ +/* */ +/* Title : SX/SI/XIO Board Hardware Definitions */ +/* */ +/* Author : N.P.Vassallo */ +/* */ +/* Creation : 16th March 1998 */ +/* */ +/* Version : 3.0.0 */ +/* */ +/* Copyright : (c) Specialix International Ltd. 1998 */ +/* */ +/* Description : Prototypes, structures and definitions */ +/* describing the SX/SI/XIO board hardware */ +/* */ +/************************************************************************/ + +/* History... + +3.0.0 16/03/98 NPV Creation. + +*/ + +#ifndef _sxboards_h /* If SXBOARDS.H not already defined */ +#define _sxboards_h 1 + +/***************************************************************************** +******************************* ****************************** +******************************* Board Types ****************************** +******************************* ****************************** +*****************************************************************************/ + +/* BUS types... */ +#define BUS_ISA 0 +#define BUS_MCA 1 +#define BUS_EISA 2 +#define BUS_PCI 3 + +/* Board phases... */ +#define SI1_Z280 1 +#define SI2_Z280 2 +#define SI3_T225 3 + +/* Board types... */ +#define CARD_TYPE(bus,phase) (bus<<4|phase) +#define CARD_BUS(type) ((type>>4)&0xF) +#define CARD_PHASE(type) (type&0xF) + +#define TYPE_SI1_ISA CARD_TYPE(BUS_ISA,SI1_Z280) +#define TYPE_SI2_ISA CARD_TYPE(BUS_ISA,SI2_Z280) +#define TYPE_SI2_EISA CARD_TYPE(BUS_EISA,SI2_Z280) +#define TYPE_SI2_PCI CARD_TYPE(BUS_PCI,SI2_Z280) + +#define TYPE_SX_ISA CARD_TYPE(BUS_ISA,SI3_T225) +#define TYPE_SX_PCI CARD_TYPE(BUS_PCI,SI3_T225) +/***************************************************************************** +****************************** ****************************** +****************************** Phase 1 Z280 ****************************** +****************************** ****************************** +*****************************************************************************/ + +/* ISA board details... */ +#define SI1_ISA_WINDOW_LEN 0x10000 /* 64 Kbyte shared memory window */ +//#define SI1_ISA_MEMORY_LEN 0x8000 /* Usable memory - unused define*/ +//#define SI1_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ +//#define SI1_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ +//#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */ +//#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */ + +/* ISA board, register definitions... */ +//#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */ +#define SI1_ISA_RESET 0x8000 /* WRITE: Host Reset */ +#define SI1_ISA_RESET_CLEAR 0xc000 /* WRITE: Host Reset clear*/ +#define SI1_ISA_WAIT 0x9000 /* WRITE: Host wait */ +#define SI1_ISA_WAIT_CLEAR 0xd000 /* WRITE: Host wait clear */ +#define SI1_ISA_INTCL 0xa000 /* WRITE: Host Reset */ +#define SI1_ISA_INTCL_CLEAR 0xe000 /* WRITE: Host Reset */ + + +/***************************************************************************** +****************************** ****************************** +****************************** Phase 2 Z280 ****************************** +****************************** ****************************** +*****************************************************************************/ + +/* ISA board details... */ +#define SI2_ISA_WINDOW_LEN 0x8000 /* 32 Kbyte shared memory window */ +#define SI2_ISA_MEMORY_LEN 0x7FF8 /* Usable memory */ +#define SI2_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ +#define SI2_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ +#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */ +#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */ + +/* ISA board, register definitions... */ +#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */ +#define SI2_ISA_RESET SI2_ISA_ID_BASE /* WRITE: Host Reset */ +#define SI2_ISA_IRQ11 (SI2_ISA_ID_BASE+1) /* WRITE: Set IRQ11 */ +#define SI2_ISA_IRQ12 (SI2_ISA_ID_BASE+2) /* WRITE: Set IRQ12 */ +#define SI2_ISA_IRQ15 (SI2_ISA_ID_BASE+3) /* WRITE: Set IRQ15 */ +#define SI2_ISA_IRQSET (SI2_ISA_ID_BASE+4) /* WRITE: Set Host Interrupt */ +#define SI2_ISA_INTCLEAR (SI2_ISA_ID_BASE+5) /* WRITE: Enable Host Interrupt */ + +#define SI2_ISA_IRQ11_SET 0x10 +#define SI2_ISA_IRQ11_CLEAR 0x00 +#define SI2_ISA_IRQ12_SET 0x10 +#define SI2_ISA_IRQ12_CLEAR 0x00 +#define SI2_ISA_IRQ15_SET 0x10 +#define SI2_ISA_IRQ15_CLEAR 0x00 +#define SI2_ISA_INTCLEAR_SET 0x10 +#define SI2_ISA_INTCLEAR_CLEAR 0x00 +#define SI2_ISA_IRQSET_CLEAR 0x10 +#define SI2_ISA_IRQSET_SET 0x00 +#define SI2_ISA_RESET_SET 0x00 +#define SI2_ISA_RESET_CLEAR 0x10 + +/* PCI board details... */ +#define SI2_PCI_WINDOW_LEN 0x100000 /* 1 Mbyte memory window */ + +/* PCI board register definitions... */ +#define SI2_PCI_SET_IRQ 0x40001 /* Set Host Interrupt */ +#define SI2_PCI_RESET 0xC0001 /* Host Reset */ + +/***************************************************************************** +****************************** ****************************** +****************************** Phase 3 T225 ****************************** +****************************** ****************************** +*****************************************************************************/ + +/* General board details... */ +#define SX_WINDOW_LEN 64*1024 /* 64 Kbyte memory window */ + +/* ISA board details... */ +#define SX_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ +#define SX_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ +#define SX_ISA_ADDR_STEP SX_WINDOW_LEN /* ISA board address step */ +#define SX_ISA_IRQ_MASK 0x9E00 /* IRQs 15,12,11,10,9 */ + +/* Hardware register definitions... */ +#define SX_EVENT_STATUS 0x7800 /* READ: T225 Event Status */ +#define SX_EVENT_STROBE 0x7800 /* WRITE: T225 Event Strobe */ +#define SX_EVENT_ENABLE 0x7880 /* WRITE: T225 Event Enable */ +#define SX_VPD_ROM 0x7C00 /* READ: Vital Product Data ROM */ +#define SX_CONFIG 0x7C00 /* WRITE: Host Configuration Register */ +#define SX_IRQ_STATUS 0x7C80 /* READ: Host Interrupt Status */ +#define SX_SET_IRQ 0x7C80 /* WRITE: Set Host Interrupt */ +#define SX_RESET_STATUS 0x7D00 /* READ: Host Reset Status */ +#define SX_RESET 0x7D00 /* WRITE: Host Reset */ +#define SX_RESET_IRQ 0x7D80 /* WRITE: Reset Host Interrupt */ + +/* SX_VPD_ROM definitions... */ +#define SX_VPD_SLX_ID1 0x00 +#define SX_VPD_SLX_ID2 0x01 +#define SX_VPD_HW_REV 0x02 +#define SX_VPD_HW_ASSEM 0x03 +#define SX_VPD_UNIQUEID4 0x04 +#define SX_VPD_UNIQUEID3 0x05 +#define SX_VPD_UNIQUEID2 0x06 +#define SX_VPD_UNIQUEID1 0x07 +#define SX_VPD_MANU_YEAR 0x08 +#define SX_VPD_MANU_WEEK 0x09 +#define SX_VPD_IDENT 0x10 +#define SX_VPD_IDENT_STRING "JET HOST BY KEV#" + +/* SX unique identifiers... */ +#define SX_UNIQUEID_MASK 0xF0 +#define SX_ISA_UNIQUEID1 0x20 +#define SX_PCI_UNIQUEID1 0x50 + +/* SX_CONFIG definitions... */ +#define SX_CONF_BUSEN 0x02 /* Enable T225 memory and I/O */ +#define SX_CONF_HOSTIRQ 0x04 /* Enable board to host interrupt */ + +/* SX bootstrap... */ +#define SX_BOOTSTRAP "\x28\x20\x21\x02\x60\x0a" +#define SX_BOOTSTRAP_SIZE 6 +#define SX_BOOTSTRAP_ADDR (0x8000-SX_BOOTSTRAP_SIZE) + +/***************************************************************************** +********************************** ********************************** +********************************** EISA ********************************** +********************************** ********************************** +*****************************************************************************/ + +#define SI2_EISA_OFF 0x42 +#define SI2_EISA_VAL 0x01 +#define SI2_EISA_WINDOW_LEN 0x10000 + +/***************************************************************************** +*********************************** ********************************** +*********************************** PCI ********************************** +*********************************** ********************************** +*****************************************************************************/ + +/* General definitions... */ + +#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */ +#define SPX_DEVICE_ID 0x4000 /* SI/XIO boards */ +#define SPX_PLXDEVICE_ID 0x2000 /* SX boards */ + +#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */ +#define SI2_SUB_SYS_ID 0x400 /* Phase 2 (Z280) board */ +#define SX_SUB_SYS_ID 0x200 /* Phase 3 (t225) board */ + +#endif /*_sxboards_h */ + +/* End of SXBOARDS.H */ diff --git a/drivers/staging/generic_serial/sxwindow.h b/drivers/staging/generic_serial/sxwindow.h new file mode 100644 index 000000000000..cf01b662aefc --- /dev/null +++ b/drivers/staging/generic_serial/sxwindow.h @@ -0,0 +1,393 @@ +/************************************************************************/ +/* */ +/* Title : SX Shared Memory Window Structure */ +/* */ +/* Author : N.P.Vassallo */ +/* */ +/* Creation : 16th March 1998 */ +/* */ +/* Version : 3.0.0 */ +/* */ +/* Copyright : (c) Specialix International Ltd. 1998 */ +/* */ +/* Description : Prototypes, structures and definitions */ +/* describing the SX/SI/XIO cards shared */ +/* memory window structure: */ +/* SXCARD */ +/* SXMODULE */ +/* SXCHANNEL */ +/* */ +/************************************************************************/ + +/* History... + +3.0.0 16/03/98 NPV Creation. (based on STRUCT.H) + +*/ + +#ifndef _sxwindow_h /* If SXWINDOW.H not already defined */ +#define _sxwindow_h 1 + +/***************************************************************************** +*************************** *************************** +*************************** Common Definitions *************************** +*************************** *************************** +*****************************************************************************/ + +typedef struct _SXCARD *PSXCARD; /* SXCARD structure pointer */ +typedef struct _SXMODULE *PMOD; /* SXMODULE structure pointer */ +typedef struct _SXCHANNEL *PCHAN; /* SXCHANNEL structure pointer */ + +/***************************************************************************** +********************************* ********************************* +********************************* SXCARD ********************************* +********************************* ********************************* +*****************************************************************************/ + +typedef struct _SXCARD +{ + BYTE cc_init_status; /* 0x00 Initialisation status */ + BYTE cc_mem_size; /* 0x01 Size of memory on card */ + WORD cc_int_count; /* 0x02 Interrupt count */ + WORD cc_revision; /* 0x04 Download code revision */ + BYTE cc_isr_count; /* 0x06 Count when ISR is run */ + BYTE cc_main_count; /* 0x07 Count when main loop is run */ + WORD cc_int_pending; /* 0x08 Interrupt pending */ + WORD cc_poll_count; /* 0x0A Count when poll is run */ + BYTE cc_int_set_count; /* 0x0C Count when host interrupt is set */ + BYTE cc_rfu[0x80 - 0x0D]; /* 0x0D Pad structure to 128 bytes (0x80) */ + +} SXCARD; + +/* SXCARD.cc_init_status definitions... */ +#define ADAPTERS_FOUND (BYTE)0x01 +#define NO_ADAPTERS_FOUND (BYTE)0xFF + +/* SXCARD.cc_mem_size definitions... */ +#define SX_MEMORY_SIZE (BYTE)0x40 + +/* SXCARD.cc_int_count definitions... */ +#define INT_COUNT_DEFAULT 100 /* Hz */ + +/***************************************************************************** +******************************** ******************************** +******************************** SXMODULE ******************************** +******************************** ******************************** +*****************************************************************************/ + +#define TOP_POINTER(a) ((a)|0x8000) /* Sets top bit of word */ +#define UNTOP_POINTER(a) ((a)&~0x8000) /* Clears top bit of word */ + +typedef struct _SXMODULE +{ + WORD mc_next; /* 0x00 Next module "pointer" (ORed with 0x8000) */ + BYTE mc_type; /* 0x02 Type of TA in terms of number of channels */ + BYTE mc_mod_no; /* 0x03 Module number on SI bus cable (0 closest to card) */ + BYTE mc_dtr; /* 0x04 Private DTR copy (TA only) */ + BYTE mc_rfu1; /* 0x05 Reserved */ + WORD mc_uart; /* 0x06 UART base address for this module */ + BYTE mc_chip; /* 0x08 Chip type / number of ports */ + BYTE mc_current_uart; /* 0x09 Current uart selected for this module */ +#ifdef DOWNLOAD + PCHAN mc_chan_pointer[8]; /* 0x0A Pointer to each channel structure */ +#else + WORD mc_chan_pointer[8]; /* 0x0A Define as WORD if not compiling into download */ +#endif + WORD mc_rfu2; /* 0x1A Reserved */ + BYTE mc_opens1; /* 0x1C Number of open ports on first four ports on MTA/SXDC */ + BYTE mc_opens2; /* 0x1D Number of open ports on second four ports on MTA/SXDC */ + BYTE mc_mods; /* 0x1E Types of connector module attached to MTA/SXDC */ + BYTE mc_rev1; /* 0x1F Revision of first CD1400 on MTA/SXDC */ + BYTE mc_rev2; /* 0x20 Revision of second CD1400 on MTA/SXDC */ + BYTE mc_mtaasic_rev; /* 0x21 Revision of MTA ASIC 1..4 -> A, B, C, D */ + BYTE mc_rfu3[0x100 - 0x22]; /* 0x22 Pad structure to 256 bytes (0x100) */ + +} SXMODULE; + +/* SXMODULE.mc_type definitions... */ +#define FOUR_PORTS (BYTE)4 +#define EIGHT_PORTS (BYTE)8 + +/* SXMODULE.mc_chip definitions... */ +#define CHIP_MASK 0xF0 +#define TA (BYTE)0 +#define TA4 (TA | FOUR_PORTS) +#define TA8 (TA | EIGHT_PORTS) +#define TA4_ASIC (BYTE)0x0A +#define TA8_ASIC (BYTE)0x0B +#define MTA_CD1400 (BYTE)0x28 +#define SXDC (BYTE)0x48 + +/* SXMODULE.mc_mods definitions... */ +#define MOD_RS232DB25 0x00 /* RS232 DB25 (socket/plug) */ +#define MOD_RS232RJ45 0x01 /* RS232 RJ45 (shielded/opto-isolated) */ +#define MOD_RESERVED_2 0x02 /* Reserved (RS485) */ +#define MOD_RS422DB25 0x03 /* RS422 DB25 Socket */ +#define MOD_RESERVED_4 0x04 /* Reserved */ +#define MOD_PARALLEL 0x05 /* Parallel */ +#define MOD_RESERVED_6 0x06 /* Reserved (RS423) */ +#define MOD_RESERVED_7 0x07 /* Reserved */ +#define MOD_2_RS232DB25 0x08 /* Rev 2.0 RS232 DB25 (socket/plug) */ +#define MOD_2_RS232RJ45 0x09 /* Rev 2.0 RS232 RJ45 */ +#define MOD_RESERVED_A 0x0A /* Rev 2.0 Reserved */ +#define MOD_2_RS422DB25 0x0B /* Rev 2.0 RS422 DB25 */ +#define MOD_RESERVED_C 0x0C /* Rev 2.0 Reserved */ +#define MOD_2_PARALLEL 0x0D /* Rev 2.0 Parallel */ +#define MOD_RESERVED_E 0x0E /* Rev 2.0 Reserved */ +#define MOD_BLANK 0x0F /* Blank Panel */ + +/***************************************************************************** +******************************** ******************************* +******************************** SXCHANNEL ******************************* +******************************** ******************************* +*****************************************************************************/ + +#define TX_BUFF_OFFSET 0x60 /* Transmit buffer offset in channel structure */ +#define BUFF_POINTER(a) (((a)+TX_BUFF_OFFSET)|0x8000) +#define UNBUFF_POINTER(a) (jet_channel*)(((a)&~0x8000)-TX_BUFF_OFFSET) +#define BUFFER_SIZE 256 +#define HIGH_WATER ((BUFFER_SIZE / 4) * 3) +#define LOW_WATER (BUFFER_SIZE / 4) + +typedef struct _SXCHANNEL +{ + WORD next_item; /* 0x00 Offset from window base of next channels hi_txbuf (ORred with 0x8000) */ + WORD addr_uart; /* 0x02 INTERNAL pointer to uart address. Includes FASTPATH bit */ + WORD module; /* 0x04 Offset from window base of parent SXMODULE structure */ + BYTE type; /* 0x06 Chip type / number of ports (copy of mc_chip) */ + BYTE chan_number; /* 0x07 Channel number on the TA/MTA/SXDC */ + WORD xc_status; /* 0x08 Flow control and I/O status */ + BYTE hi_rxipos; /* 0x0A Receive buffer input index */ + BYTE hi_rxopos; /* 0x0B Receive buffer output index */ + BYTE hi_txopos; /* 0x0C Transmit buffer output index */ + BYTE hi_txipos; /* 0x0D Transmit buffer input index */ + BYTE hi_hstat; /* 0x0E Command register */ + BYTE dtr_bit; /* 0x0F INTERNAL DTR control byte (TA only) */ + BYTE txon; /* 0x10 INTERNAL copy of hi_txon */ + BYTE txoff; /* 0x11 INTERNAL copy of hi_txoff */ + BYTE rxon; /* 0x12 INTERNAL copy of hi_rxon */ + BYTE rxoff; /* 0x13 INTERNAL copy of hi_rxoff */ + BYTE hi_mr1; /* 0x14 Mode Register 1 (databits,parity,RTS rx flow)*/ + BYTE hi_mr2; /* 0x15 Mode Register 2 (stopbits,local,CTS tx flow)*/ + BYTE hi_csr; /* 0x16 Clock Select Register (baud rate) */ + BYTE hi_op; /* 0x17 Modem Output Signal */ + BYTE hi_ip; /* 0x18 Modem Input Signal */ + BYTE hi_state; /* 0x19 Channel status */ + BYTE hi_prtcl; /* 0x1A Channel protocol (flow control) */ + BYTE hi_txon; /* 0x1B Transmit XON character */ + BYTE hi_txoff; /* 0x1C Transmit XOFF character */ + BYTE hi_rxon; /* 0x1D Receive XON character */ + BYTE hi_rxoff; /* 0x1E Receive XOFF character */ + BYTE close_prev; /* 0x1F INTERNAL channel previously closed flag */ + BYTE hi_break; /* 0x20 Break and error control */ + BYTE break_state; /* 0x21 INTERNAL copy of hi_break */ + BYTE hi_mask; /* 0x22 Mask for received data */ + BYTE mask; /* 0x23 INTERNAL copy of hi_mask */ + BYTE mod_type; /* 0x24 MTA/SXDC hardware module type */ + BYTE ccr_state; /* 0x25 INTERNAL MTA/SXDC state of CCR register */ + BYTE ip_mask; /* 0x26 Input handshake mask */ + BYTE hi_parallel; /* 0x27 Parallel port flag */ + BYTE par_error; /* 0x28 Error code for parallel loopback test */ + BYTE any_sent; /* 0x29 INTERNAL data sent flag */ + BYTE asic_txfifo_size; /* 0x2A INTERNAL SXDC transmit FIFO size */ + BYTE rfu1[2]; /* 0x2B Reserved */ + BYTE csr; /* 0x2D INTERNAL copy of hi_csr */ +#ifdef DOWNLOAD + PCHAN nextp; /* 0x2E Offset from window base of next channel structure */ +#else + WORD nextp; /* 0x2E Define as WORD if not compiling into download */ +#endif + BYTE prtcl; /* 0x30 INTERNAL copy of hi_prtcl */ + BYTE mr1; /* 0x31 INTERNAL copy of hi_mr1 */ + BYTE mr2; /* 0x32 INTERNAL copy of hi_mr2 */ + BYTE hi_txbaud; /* 0x33 Extended transmit baud rate (SXDC only if((hi_csr&0x0F)==0x0F) */ + BYTE hi_rxbaud; /* 0x34 Extended receive baud rate (SXDC only if((hi_csr&0xF0)==0xF0) */ + BYTE txbreak_state; /* 0x35 INTERNAL MTA/SXDC transmit break state */ + BYTE txbaud; /* 0x36 INTERNAL copy of hi_txbaud */ + BYTE rxbaud; /* 0x37 INTERNAL copy of hi_rxbaud */ + WORD err_framing; /* 0x38 Count of receive framing errors */ + WORD err_parity; /* 0x3A Count of receive parity errors */ + WORD err_overrun; /* 0x3C Count of receive overrun errors */ + WORD err_overflow; /* 0x3E Count of receive buffer overflow errors */ + BYTE rfu2[TX_BUFF_OFFSET - 0x40]; /* 0x40 Reserved until hi_txbuf */ + BYTE hi_txbuf[BUFFER_SIZE]; /* 0x060 Transmit buffer */ + BYTE hi_rxbuf[BUFFER_SIZE]; /* 0x160 Receive buffer */ + BYTE rfu3[0x300 - 0x260]; /* 0x260 Reserved until 768 bytes (0x300) */ + +} SXCHANNEL; + +/* SXCHANNEL.addr_uart definitions... */ +#define FASTPATH 0x1000 /* Set to indicate fast rx/tx processing (TA only) */ + +/* SXCHANNEL.xc_status definitions... */ +#define X_TANY 0x0001 /* XON is any character (TA only) */ +#define X_TION 0x0001 /* Tx interrupts on (MTA only) */ +#define X_TXEN 0x0002 /* Tx XON/XOFF enabled (TA only) */ +#define X_RTSEN 0x0002 /* RTS FLOW enabled (MTA only) */ +#define X_TXRC 0x0004 /* XOFF received (TA only) */ +#define X_RTSLOW 0x0004 /* RTS dropped (MTA only) */ +#define X_RXEN 0x0008 /* Rx XON/XOFF enabled */ +#define X_ANYXO 0x0010 /* XOFF pending/sent or RTS dropped */ +#define X_RXSE 0x0020 /* Rx XOFF sent */ +#define X_NPEND 0x0040 /* Rx XON pending or XOFF pending */ +#define X_FPEND 0x0080 /* Rx XOFF pending */ +#define C_CRSE 0x0100 /* Carriage return sent (TA only) */ +#define C_TEMR 0x0100 /* Tx empty requested (MTA only) */ +#define C_TEMA 0x0200 /* Tx empty acked (MTA only) */ +#define C_ANYP 0x0200 /* Any protocol bar tx XON/XOFF (TA only) */ +#define C_EN 0x0400 /* Cooking enabled (on MTA means port is also || */ +#define C_HIGH 0x0800 /* Buffer previously hit high water */ +#define C_CTSEN 0x1000 /* CTS automatic flow-control enabled */ +#define C_DCDEN 0x2000 /* DCD/DTR checking enabled */ +#define C_BREAK 0x4000 /* Break detected */ +#define C_RTSEN 0x8000 /* RTS automatic flow control enabled (MTA only) */ +#define C_PARITY 0x8000 /* Parity checking enabled (TA only) */ + +/* SXCHANNEL.hi_hstat definitions... */ +#define HS_IDLE_OPEN 0x00 /* Channel open state */ +#define HS_LOPEN 0x02 /* Local open command (no modem monitoring) */ +#define HS_MOPEN 0x04 /* Modem open command (wait for DCD signal) */ +#define HS_IDLE_MPEND 0x06 /* Waiting for DCD signal state */ +#define HS_CONFIG 0x08 /* Configuration command */ +#define HS_CLOSE 0x0A /* Close command */ +#define HS_START 0x0C /* Start transmit break command */ +#define HS_STOP 0x0E /* Stop transmit break command */ +#define HS_IDLE_CLOSED 0x10 /* Closed channel state */ +#define HS_IDLE_BREAK 0x12 /* Transmit break state */ +#define HS_FORCE_CLOSED 0x14 /* Force close command */ +#define HS_RESUME 0x16 /* Clear pending XOFF command */ +#define HS_WFLUSH 0x18 /* Flush transmit buffer command */ +#define HS_RFLUSH 0x1A /* Flush receive buffer command */ +#define HS_SUSPEND 0x1C /* Suspend output command (like XOFF received) */ +#define PARALLEL 0x1E /* Parallel port loopback test command (Diagnostics Only) */ +#define ENABLE_RX_INTS 0x20 /* Enable receive interrupts command (Diagnostics Only) */ +#define ENABLE_TX_INTS 0x22 /* Enable transmit interrupts command (Diagnostics Only) */ +#define ENABLE_MDM_INTS 0x24 /* Enable modem interrupts command (Diagnostics Only) */ +#define DISABLE_INTS 0x26 /* Disable interrupts command (Diagnostics Only) */ + +/* SXCHANNEL.hi_mr1 definitions... */ +#define MR1_BITS 0x03 /* Data bits mask */ +#define MR1_5_BITS 0x00 /* 5 data bits */ +#define MR1_6_BITS 0x01 /* 6 data bits */ +#define MR1_7_BITS 0x02 /* 7 data bits */ +#define MR1_8_BITS 0x03 /* 8 data bits */ +#define MR1_PARITY 0x1C /* Parity mask */ +#define MR1_ODD 0x04 /* Odd parity */ +#define MR1_EVEN 0x00 /* Even parity */ +#define MR1_WITH 0x00 /* Parity enabled */ +#define MR1_FORCE 0x08 /* Force parity */ +#define MR1_NONE 0x10 /* No parity */ +#define MR1_NOPARITY MR1_NONE /* No parity */ +#define MR1_ODDPARITY (MR1_WITH|MR1_ODD) /* Odd parity */ +#define MR1_EVENPARITY (MR1_WITH|MR1_EVEN) /* Even parity */ +#define MR1_MARKPARITY (MR1_FORCE|MR1_ODD) /* Mark parity */ +#define MR1_SPACEPARITY (MR1_FORCE|MR1_EVEN) /* Space parity */ +#define MR1_RTS_RXFLOW 0x80 /* RTS receive flow control */ + +/* SXCHANNEL.hi_mr2 definitions... */ +#define MR2_STOP 0x0F /* Stop bits mask */ +#define MR2_1_STOP 0x07 /* 1 stop bit */ +#define MR2_2_STOP 0x0F /* 2 stop bits */ +#define MR2_CTS_TXFLOW 0x10 /* CTS transmit flow control */ +#define MR2_RTS_TOGGLE 0x20 /* RTS toggle on transmit */ +#define MR2_NORMAL 0x00 /* Normal mode */ +#define MR2_AUTO 0x40 /* Auto-echo mode (TA only) */ +#define MR2_LOCAL 0x80 /* Local echo mode */ +#define MR2_REMOTE 0xC0 /* Remote echo mode (TA only) */ + +/* SXCHANNEL.hi_csr definitions... */ +#define CSR_75 0x0 /* 75 baud */ +#define CSR_110 0x1 /* 110 baud (TA), 115200 (MTA/SXDC) */ +#define CSR_38400 0x2 /* 38400 baud */ +#define CSR_150 0x3 /* 150 baud */ +#define CSR_300 0x4 /* 300 baud */ +#define CSR_600 0x5 /* 600 baud */ +#define CSR_1200 0x6 /* 1200 baud */ +#define CSR_2000 0x7 /* 2000 baud */ +#define CSR_2400 0x8 /* 2400 baud */ +#define CSR_4800 0x9 /* 4800 baud */ +#define CSR_1800 0xA /* 1800 baud */ +#define CSR_9600 0xB /* 9600 baud */ +#define CSR_19200 0xC /* 19200 baud */ +#define CSR_57600 0xD /* 57600 baud */ +#define CSR_EXTBAUD 0xF /* Extended baud rate (hi_txbaud/hi_rxbaud) */ + +/* SXCHANNEL.hi_op definitions... */ +#define OP_RTS 0x01 /* RTS modem output signal */ +#define OP_DTR 0x02 /* DTR modem output signal */ + +/* SXCHANNEL.hi_ip definitions... */ +#define IP_CTS 0x02 /* CTS modem input signal */ +#define IP_DCD 0x04 /* DCD modem input signal */ +#define IP_DSR 0x20 /* DTR modem input signal */ +#define IP_RI 0x40 /* RI modem input signal */ + +/* SXCHANNEL.hi_state definitions... */ +#define ST_BREAK 0x01 /* Break received (clear with config) */ +#define ST_DCD 0x02 /* DCD signal changed state */ + +/* SXCHANNEL.hi_prtcl definitions... */ +#define SP_TANY 0x01 /* Transmit XON/XANY (if SP_TXEN enabled) */ +#define SP_TXEN 0x02 /* Transmit XON/XOFF flow control */ +#define SP_CEN 0x04 /* Cooking enabled */ +#define SP_RXEN 0x08 /* Rx XON/XOFF enabled */ +#define SP_DCEN 0x20 /* DCD / DTR check */ +#define SP_DTR_RXFLOW 0x40 /* DTR receive flow control */ +#define SP_PAEN 0x80 /* Parity checking enabled */ + +/* SXCHANNEL.hi_break definitions... */ +#define BR_IGN 0x01 /* Ignore any received breaks */ +#define BR_INT 0x02 /* Interrupt on received break */ +#define BR_PARMRK 0x04 /* Enable parmrk parity error processing */ +#define BR_PARIGN 0x08 /* Ignore chars with parity errors */ +#define BR_ERRINT 0x80 /* Treat parity/framing/overrun errors as exceptions */ + +/* SXCHANNEL.par_error definitions.. */ +#define DIAG_IRQ_RX 0x01 /* Indicate serial receive interrupt (diags only) */ +#define DIAG_IRQ_TX 0x02 /* Indicate serial transmit interrupt (diags only) */ +#define DIAG_IRQ_MD 0x04 /* Indicate serial modem interrupt (diags only) */ + +/* SXCHANNEL.hi_txbaud/hi_rxbaud definitions... (SXDC only) */ +#define BAUD_75 0x00 /* 75 baud */ +#define BAUD_115200 0x01 /* 115200 baud */ +#define BAUD_38400 0x02 /* 38400 baud */ +#define BAUD_150 0x03 /* 150 baud */ +#define BAUD_300 0x04 /* 300 baud */ +#define BAUD_600 0x05 /* 600 baud */ +#define BAUD_1200 0x06 /* 1200 baud */ +#define BAUD_2000 0x07 /* 2000 baud */ +#define BAUD_2400 0x08 /* 2400 baud */ +#define BAUD_4800 0x09 /* 4800 baud */ +#define BAUD_1800 0x0A /* 1800 baud */ +#define BAUD_9600 0x0B /* 9600 baud */ +#define BAUD_19200 0x0C /* 19200 baud */ +#define BAUD_57600 0x0D /* 57600 baud */ +#define BAUD_230400 0x0E /* 230400 baud */ +#define BAUD_460800 0x0F /* 460800 baud */ +#define BAUD_921600 0x10 /* 921600 baud */ +#define BAUD_50 0x11 /* 50 baud */ +#define BAUD_110 0x12 /* 110 baud */ +#define BAUD_134_5 0x13 /* 134.5 baud */ +#define BAUD_200 0x14 /* 200 baud */ +#define BAUD_7200 0x15 /* 7200 baud */ +#define BAUD_56000 0x16 /* 56000 baud */ +#define BAUD_64000 0x17 /* 64000 baud */ +#define BAUD_76800 0x18 /* 76800 baud */ +#define BAUD_128000 0x19 /* 128000 baud */ +#define BAUD_150000 0x1A /* 150000 baud */ +#define BAUD_14400 0x1B /* 14400 baud */ +#define BAUD_256000 0x1C /* 256000 baud */ +#define BAUD_28800 0x1D /* 28800 baud */ + +/* SXCHANNEL.txbreak_state definiions... */ +#define TXBREAK_OFF 0 /* Not sending break */ +#define TXBREAK_START 1 /* Begin sending break */ +#define TXBREAK_START1 2 /* Begin sending break, part 1 */ +#define TXBREAK_ON 3 /* Sending break */ +#define TXBREAK_STOP 4 /* Stop sending break */ +#define TXBREAK_STOP1 5 /* Stop sending break, part 1 */ + +#endif /* _sxwindow_h */ + +/* End of SXWINDOW.H */ + diff --git a/drivers/staging/generic_serial/vme_scc.c b/drivers/staging/generic_serial/vme_scc.c new file mode 100644 index 000000000000..96838640f575 --- /dev/null +++ b/drivers/staging/generic_serial/vme_scc.c @@ -0,0 +1,1145 @@ +/* + * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports + * implementation. + * Copyright 1999 Richard Hirst + * + * Based on atari_SCC.c which was + * Copyright 1994-95 Roman Hodek + * Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MVME147_SCC +#include +#endif +#ifdef CONFIG_MVME162_SCC +#include +#endif +#ifdef CONFIG_BVME6000_SCC +#include +#endif + +#include +#include "scc.h" + + +#define CHANNEL_A 0 +#define CHANNEL_B 1 + +#define SCC_MINOR_BASE 64 + +/* Shadows for all SCC write registers */ +static unsigned char scc_shadow[2][16]; + +/* Location to access for SCC register access delay */ +static volatile unsigned char *scc_del = NULL; + +/* To keep track of STATUS_REG state for detection of Ext/Status int source */ +static unsigned char scc_last_status_reg[2]; + +/***************************** Prototypes *****************************/ + +/* Function prototypes */ +static void scc_disable_tx_interrupts(void * ptr); +static void scc_enable_tx_interrupts(void * ptr); +static void scc_disable_rx_interrupts(void * ptr); +static void scc_enable_rx_interrupts(void * ptr); +static int scc_carrier_raised(struct tty_port *port); +static void scc_shutdown_port(void * ptr); +static int scc_set_real_termios(void *ptr); +static void scc_hungup(void *ptr); +static void scc_close(void *ptr); +static int scc_chars_in_buffer(void * ptr); +static int scc_open(struct tty_struct * tty, struct file * filp); +static int scc_ioctl(struct tty_struct * tty, + unsigned int cmd, unsigned long arg); +static void scc_throttle(struct tty_struct *tty); +static void scc_unthrottle(struct tty_struct *tty); +static irqreturn_t scc_tx_int(int irq, void *data); +static irqreturn_t scc_rx_int(int irq, void *data); +static irqreturn_t scc_stat_int(int irq, void *data); +static irqreturn_t scc_spcond_int(int irq, void *data); +static void scc_setsignals(struct scc_port *port, int dtr, int rts); +static int scc_break_ctl(struct tty_struct *tty, int break_state); + +static struct tty_driver *scc_driver; + +static struct scc_port scc_ports[2]; + +/*--------------------------------------------------------------------------- + * Interface from generic_serial.c back here + *--------------------------------------------------------------------------*/ + +static struct real_driver scc_real_driver = { + scc_disable_tx_interrupts, + scc_enable_tx_interrupts, + scc_disable_rx_interrupts, + scc_enable_rx_interrupts, + scc_shutdown_port, + scc_set_real_termios, + scc_chars_in_buffer, + scc_close, + scc_hungup, + NULL +}; + + +static const struct tty_operations scc_ops = { + .open = scc_open, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .chars_in_buffer = gs_chars_in_buffer, + .flush_buffer = gs_flush_buffer, + .ioctl = scc_ioctl, + .throttle = scc_throttle, + .unthrottle = scc_unthrottle, + .set_termios = gs_set_termios, + .stop = gs_stop, + .start = gs_start, + .hangup = gs_hangup, + .break_ctl = scc_break_ctl, +}; + +static const struct tty_port_operations scc_port_ops = { + .carrier_raised = scc_carrier_raised, +}; + +/*---------------------------------------------------------------------------- + * vme_scc_init() and support functions + *---------------------------------------------------------------------------*/ + +static int __init scc_init_drivers(void) +{ + int error; + + scc_driver = alloc_tty_driver(2); + if (!scc_driver) + return -ENOMEM; + scc_driver->owner = THIS_MODULE; + scc_driver->driver_name = "scc"; + scc_driver->name = "ttyS"; + scc_driver->major = TTY_MAJOR; + scc_driver->minor_start = SCC_MINOR_BASE; + scc_driver->type = TTY_DRIVER_TYPE_SERIAL; + scc_driver->subtype = SERIAL_TYPE_NORMAL; + scc_driver->init_termios = tty_std_termios; + scc_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + scc_driver->init_termios.c_ispeed = 9600; + scc_driver->init_termios.c_ospeed = 9600; + scc_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(scc_driver, &scc_ops); + + if ((error = tty_register_driver(scc_driver))) { + printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n", + error); + put_tty_driver(scc_driver); + return 1; + } + + return 0; +} + + +/* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1). + */ + +static void __init scc_init_portstructs(void) +{ + struct scc_port *port; + int i; + + for (i = 0; i < 2; i++) { + port = scc_ports + i; + tty_port_init(&port->gs.port); + port->gs.port.ops = &scc_port_ops; + port->gs.magic = SCC_MAGIC; + port->gs.close_delay = HZ/2; + port->gs.closing_wait = 30 * HZ; + port->gs.rd = &scc_real_driver; +#ifdef NEW_WRITE_LOCKING + port->gs.port_write_mutex = MUTEX; +#endif + init_waitqueue_head(&port->gs.port.open_wait); + init_waitqueue_head(&port->gs.port.close_wait); + } +} + + +#ifdef CONFIG_MVME147_SCC +static int __init mvme147_scc_init(void) +{ + struct scc_port *port; + int error; + + printk(KERN_INFO "SCC: MVME147 Serial Driver\n"); + /* Init channel A */ + port = &scc_ports[0]; + port->channel = CHANNEL_A; + port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR; + port->datap = port->ctrlp + 1; + port->port_a = &scc_ports[0]; + port->port_b = &scc_ports[1]; + error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, + "SCC-A TX", port); + if (error) + goto fail; + error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, + "SCC-A status", port); + if (error) + goto fail_free_a_tx; + error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, + "SCC-A RX", port); + if (error) + goto fail_free_a_stat; + error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-A special cond", port); + if (error) + goto fail_free_a_rx; + + { + SCC_ACCESS_INIT(port); + + /* disable interrupts for this channel */ + SCCwrite(INT_AND_DMA_REG, 0); + /* Set the interrupt vector */ + SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE); + /* Interrupt parameters: vector includes status, status low */ + SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); + SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); + } + + /* Init channel B */ + port = &scc_ports[1]; + port->channel = CHANNEL_B; + port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR; + port->datap = port->ctrlp + 1; + port->port_a = &scc_ports[0]; + port->port_b = &scc_ports[1]; + error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, + "SCC-B TX", port); + if (error) + goto fail_free_a_spcond; + error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, + "SCC-B status", port); + if (error) + goto fail_free_b_tx; + error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, + "SCC-B RX", port); + if (error) + goto fail_free_b_stat; + error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-B special cond", port); + if (error) + goto fail_free_b_rx; + + { + SCC_ACCESS_INIT(port); + + /* disable interrupts for this channel */ + SCCwrite(INT_AND_DMA_REG, 0); + } + + /* Ensure interrupts are enabled in the PCC chip */ + m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB; + + /* Initialise the tty driver structures and register */ + scc_init_portstructs(); + scc_init_drivers(); + + return 0; + +fail_free_b_rx: + free_irq(MVME147_IRQ_SCCB_RX, port); +fail_free_b_stat: + free_irq(MVME147_IRQ_SCCB_STAT, port); +fail_free_b_tx: + free_irq(MVME147_IRQ_SCCB_TX, port); +fail_free_a_spcond: + free_irq(MVME147_IRQ_SCCA_SPCOND, port); +fail_free_a_rx: + free_irq(MVME147_IRQ_SCCA_RX, port); +fail_free_a_stat: + free_irq(MVME147_IRQ_SCCA_STAT, port); +fail_free_a_tx: + free_irq(MVME147_IRQ_SCCA_TX, port); +fail: + return error; +} +#endif + + +#ifdef CONFIG_MVME162_SCC +static int __init mvme162_scc_init(void) +{ + struct scc_port *port; + int error; + + if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA)) + return (-ENODEV); + + printk(KERN_INFO "SCC: MVME162 Serial Driver\n"); + /* Init channel A */ + port = &scc_ports[0]; + port->channel = CHANNEL_A; + port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR; + port->datap = port->ctrlp + 2; + port->port_a = &scc_ports[0]; + port->port_b = &scc_ports[1]; + error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, + "SCC-A TX", port); + if (error) + goto fail; + error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, + "SCC-A status", port); + if (error) + goto fail_free_a_tx; + error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, + "SCC-A RX", port); + if (error) + goto fail_free_a_stat; + error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-A special cond", port); + if (error) + goto fail_free_a_rx; + + { + SCC_ACCESS_INIT(port); + + /* disable interrupts for this channel */ + SCCwrite(INT_AND_DMA_REG, 0); + /* Set the interrupt vector */ + SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE); + /* Interrupt parameters: vector includes status, status low */ + SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); + SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); + } + + /* Init channel B */ + port = &scc_ports[1]; + port->channel = CHANNEL_B; + port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR; + port->datap = port->ctrlp + 2; + port->port_a = &scc_ports[0]; + port->port_b = &scc_ports[1]; + error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, + "SCC-B TX", port); + if (error) + goto fail_free_a_spcond; + error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, + "SCC-B status", port); + if (error) + goto fail_free_b_tx; + error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, + "SCC-B RX", port); + if (error) + goto fail_free_b_stat; + error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-B special cond", port); + if (error) + goto fail_free_b_rx; + + { + SCC_ACCESS_INIT(port); /* Either channel will do */ + + /* disable interrupts for this channel */ + SCCwrite(INT_AND_DMA_REG, 0); + } + + /* Ensure interrupts are enabled in the MC2 chip */ + *(volatile char *)0xfff4201d = 0x14; + + /* Initialise the tty driver structures and register */ + scc_init_portstructs(); + scc_init_drivers(); + + return 0; + +fail_free_b_rx: + free_irq(MVME162_IRQ_SCCB_RX, port); +fail_free_b_stat: + free_irq(MVME162_IRQ_SCCB_STAT, port); +fail_free_b_tx: + free_irq(MVME162_IRQ_SCCB_TX, port); +fail_free_a_spcond: + free_irq(MVME162_IRQ_SCCA_SPCOND, port); +fail_free_a_rx: + free_irq(MVME162_IRQ_SCCA_RX, port); +fail_free_a_stat: + free_irq(MVME162_IRQ_SCCA_STAT, port); +fail_free_a_tx: + free_irq(MVME162_IRQ_SCCA_TX, port); +fail: + return error; +} +#endif + + +#ifdef CONFIG_BVME6000_SCC +static int __init bvme6000_scc_init(void) +{ + struct scc_port *port; + int error; + + printk(KERN_INFO "SCC: BVME6000 Serial Driver\n"); + /* Init channel A */ + port = &scc_ports[0]; + port->channel = CHANNEL_A; + port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR; + port->datap = port->ctrlp + 4; + port->port_a = &scc_ports[0]; + port->port_b = &scc_ports[1]; + error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, + "SCC-A TX", port); + if (error) + goto fail; + error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, + "SCC-A status", port); + if (error) + goto fail_free_a_tx; + error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, + "SCC-A RX", port); + if (error) + goto fail_free_a_stat; + error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-A special cond", port); + if (error) + goto fail_free_a_rx; + + { + SCC_ACCESS_INIT(port); + + /* disable interrupts for this channel */ + SCCwrite(INT_AND_DMA_REG, 0); + /* Set the interrupt vector */ + SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE); + /* Interrupt parameters: vector includes status, status low */ + SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); + SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); + } + + /* Init channel B */ + port = &scc_ports[1]; + port->channel = CHANNEL_B; + port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR; + port->datap = port->ctrlp + 4; + port->port_a = &scc_ports[0]; + port->port_b = &scc_ports[1]; + error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, + "SCC-B TX", port); + if (error) + goto fail_free_a_spcond; + error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, + "SCC-B status", port); + if (error) + goto fail_free_b_tx; + error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, + "SCC-B RX", port); + if (error) + goto fail_free_b_stat; + error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-B special cond", port); + if (error) + goto fail_free_b_rx; + + { + SCC_ACCESS_INIT(port); /* Either channel will do */ + + /* disable interrupts for this channel */ + SCCwrite(INT_AND_DMA_REG, 0); + } + + /* Initialise the tty driver structures and register */ + scc_init_portstructs(); + scc_init_drivers(); + + return 0; + +fail: + free_irq(BVME_IRQ_SCCA_STAT, port); +fail_free_a_tx: + free_irq(BVME_IRQ_SCCA_RX, port); +fail_free_a_stat: + free_irq(BVME_IRQ_SCCA_SPCOND, port); +fail_free_a_rx: + free_irq(BVME_IRQ_SCCB_TX, port); +fail_free_a_spcond: + free_irq(BVME_IRQ_SCCB_STAT, port); +fail_free_b_tx: + free_irq(BVME_IRQ_SCCB_RX, port); +fail_free_b_stat: + free_irq(BVME_IRQ_SCCB_SPCOND, port); +fail_free_b_rx: + return error; +} +#endif + + +static int __init vme_scc_init(void) +{ + int res = -ENODEV; + +#ifdef CONFIG_MVME147_SCC + if (MACH_IS_MVME147) + res = mvme147_scc_init(); +#endif +#ifdef CONFIG_MVME162_SCC + if (MACH_IS_MVME16x) + res = mvme162_scc_init(); +#endif +#ifdef CONFIG_BVME6000_SCC + if (MACH_IS_BVME6000) + res = bvme6000_scc_init(); +#endif + return res; +} + +module_init(vme_scc_init); + + +/*--------------------------------------------------------------------------- + * Interrupt handlers + *--------------------------------------------------------------------------*/ + +static irqreturn_t scc_rx_int(int irq, void *data) +{ + unsigned char ch; + struct scc_port *port = data; + struct tty_struct *tty = port->gs.port.tty; + SCC_ACCESS_INIT(port); + + ch = SCCread_NB(RX_DATA_REG); + if (!tty) { + printk(KERN_WARNING "scc_rx_int with NULL tty!\n"); + SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); + return IRQ_HANDLED; + } + tty_insert_flip_char(tty, ch, 0); + + /* Check if another character is already ready; in that case, the + * spcond_int() function must be used, because this character may have an + * error condition that isn't signalled by the interrupt vector used! + */ + if (SCCread(INT_PENDING_REG) & + (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) { + scc_spcond_int (irq, data); + return IRQ_HANDLED; + } + + SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); + + tty_flip_buffer_push(tty); + return IRQ_HANDLED; +} + + +static irqreturn_t scc_spcond_int(int irq, void *data) +{ + struct scc_port *port = data; + struct tty_struct *tty = port->gs.port.tty; + unsigned char stat, ch, err; + int int_pending_mask = port->channel == CHANNEL_A ? + IPR_A_RX : IPR_B_RX; + SCC_ACCESS_INIT(port); + + if (!tty) { + printk(KERN_WARNING "scc_spcond_int with NULL tty!\n"); + SCCwrite(COMMAND_REG, CR_ERROR_RESET); + SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); + return IRQ_HANDLED; + } + do { + stat = SCCread(SPCOND_STATUS_REG); + ch = SCCread_NB(RX_DATA_REG); + + if (stat & SCSR_RX_OVERRUN) + err = TTY_OVERRUN; + else if (stat & SCSR_PARITY_ERR) + err = TTY_PARITY; + else if (stat & SCSR_CRC_FRAME_ERR) + err = TTY_FRAME; + else + err = 0; + + tty_insert_flip_char(tty, ch, err); + + /* ++TeSche: *All* errors have to be cleared manually, + * else the condition persists for the next chars + */ + if (err) + SCCwrite(COMMAND_REG, CR_ERROR_RESET); + + } while(SCCread(INT_PENDING_REG) & int_pending_mask); + + SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); + + tty_flip_buffer_push(tty); + return IRQ_HANDLED; +} + + +static irqreturn_t scc_tx_int(int irq, void *data) +{ + struct scc_port *port = data; + SCC_ACCESS_INIT(port); + + if (!port->gs.port.tty) { + printk(KERN_WARNING "scc_tx_int with NULL tty!\n"); + SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); + SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); + SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); + return IRQ_HANDLED; + } + while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) { + if (port->x_char) { + SCCwrite(TX_DATA_REG, port->x_char); + port->x_char = 0; + } + else if ((port->gs.xmit_cnt <= 0) || + port->gs.port.tty->stopped || + port->gs.port.tty->hw_stopped) + break; + else { + SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]); + port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1); + if (--port->gs.xmit_cnt <= 0) + break; + } + } + if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped || + port->gs.port.tty->hw_stopped) { + /* disable tx interrupts */ + SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); + SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */ + port->gs.port.flags &= ~GS_TX_INTEN; + } + if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars) + tty_wakeup(port->gs.port.tty); + + SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); + return IRQ_HANDLED; +} + + +static irqreturn_t scc_stat_int(int irq, void *data) +{ + struct scc_port *port = data; + unsigned channel = port->channel; + unsigned char last_sr, sr, changed; + SCC_ACCESS_INIT(port); + + last_sr = scc_last_status_reg[channel]; + sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG); + changed = last_sr ^ sr; + + if (changed & SR_DCD) { + port->c_dcd = !!(sr & SR_DCD); + if (!(port->gs.port.flags & ASYNC_CHECK_CD)) + ; /* Don't report DCD changes */ + else if (port->c_dcd) { + wake_up_interruptible(&port->gs.port.open_wait); + } + else { + if (port->gs.port.tty) + tty_hangup (port->gs.port.tty); + } + } + SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET); + SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); + return IRQ_HANDLED; +} + + +/*--------------------------------------------------------------------------- + * generic_serial.c callback funtions + *--------------------------------------------------------------------------*/ + +static void scc_disable_tx_interrupts(void *ptr) +{ + struct scc_port *port = ptr; + unsigned long flags; + SCC_ACCESS_INIT(port); + + local_irq_save(flags); + SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); + port->gs.port.flags &= ~GS_TX_INTEN; + local_irq_restore(flags); +} + + +static void scc_enable_tx_interrupts(void *ptr) +{ + struct scc_port *port = ptr; + unsigned long flags; + SCC_ACCESS_INIT(port); + + local_irq_save(flags); + SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB); + /* restart the transmitter */ + scc_tx_int (0, port); + local_irq_restore(flags); +} + + +static void scc_disable_rx_interrupts(void *ptr) +{ + struct scc_port *port = ptr; + unsigned long flags; + SCC_ACCESS_INIT(port); + + local_irq_save(flags); + SCCmod(INT_AND_DMA_REG, + ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0); + local_irq_restore(flags); +} + + +static void scc_enable_rx_interrupts(void *ptr) +{ + struct scc_port *port = ptr; + unsigned long flags; + SCC_ACCESS_INIT(port); + + local_irq_save(flags); + SCCmod(INT_AND_DMA_REG, 0xff, + IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL); + local_irq_restore(flags); +} + + +static int scc_carrier_raised(struct tty_port *port) +{ + struct scc_port *sc = container_of(port, struct scc_port, gs.port); + unsigned channel = sc->channel; + + return !!(scc_last_status_reg[channel] & SR_DCD); +} + + +static void scc_shutdown_port(void *ptr) +{ + struct scc_port *port = ptr; + + port->gs.port.flags &= ~ GS_ACTIVE; + if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { + scc_setsignals (port, 0, 0); + } +} + + +static int scc_set_real_termios (void *ptr) +{ + /* the SCC has char sizes 5,7,6,8 in that order! */ + static int chsize_map[4] = { 0, 2, 1, 3 }; + unsigned cflag, baud, chsize, channel, brgval = 0; + unsigned long flags; + struct scc_port *port = ptr; + SCC_ACCESS_INIT(port); + + if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; + + channel = port->channel; + + if (channel == CHANNEL_A) + return 0; /* Settings controlled by boot PROM */ + + cflag = port->gs.port.tty->termios->c_cflag; + baud = port->gs.baud; + chsize = (cflag & CSIZE) >> 4; + + if (baud == 0) { + /* speed == 0 -> drop DTR */ + local_irq_save(flags); + SCCmod(TX_CTRL_REG, ~TCR_DTR, 0); + local_irq_restore(flags); + return 0; + } + else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) || + (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) || + (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) { + printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud); + return 0; + } + + if (cflag & CLOCAL) + port->gs.port.flags &= ~ASYNC_CHECK_CD; + else + port->gs.port.flags |= ASYNC_CHECK_CD; + +#ifdef CONFIG_MVME147_SCC + if (MACH_IS_MVME147) + brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; +#endif +#ifdef CONFIG_MVME162_SCC + if (MACH_IS_MVME16x) + brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; +#endif +#ifdef CONFIG_BVME6000_SCC + if (MACH_IS_BVME6000) + brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2; +#endif + /* Now we have all parameters and can go to set them: */ + local_irq_save(flags); + + /* receiver's character size and auto-enables */ + SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE), + (chsize_map[chsize] << 6) | + ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0)); + /* parity and stop bits (both, Tx and Rx), clock mode never changes */ + SCCmod (AUX1_CTRL_REG, + ~(A1CR_PARITY_MASK | A1CR_MODE_MASK), + ((cflag & PARENB + ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN) + : A1CR_PARITY_NONE) + | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1))); + /* sender's character size, set DTR for valid baud rate */ + SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR); + /* clock sources never change */ + /* disable BRG before changing the value */ + SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0); + /* BRG value */ + SCCwrite(TIMER_LOW_REG, brgval & 0xff); + SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff); + /* BRG enable, and clock source never changes */ + SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB); + + local_irq_restore(flags); + + return 0; +} + + +static int scc_chars_in_buffer (void *ptr) +{ + struct scc_port *port = ptr; + SCC_ACCESS_INIT(port); + + return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0 : 1; +} + + +/* Comment taken from sx.c (2.4.0): + I haven't the foggiest why the decrement use count has to happen + here. The whole linux serial drivers stuff needs to be redesigned. + My guess is that this is a hack to minimize the impact of a bug + elsewhere. Thinking about it some more. (try it sometime) Try + running minicom on a serial port that is driven by a modularized + driver. Have the modem hangup. Then remove the driver module. Then + exit minicom. I expect an "oops". -- REW */ + +static void scc_hungup(void *ptr) +{ + scc_disable_tx_interrupts(ptr); + scc_disable_rx_interrupts(ptr); +} + + +static void scc_close(void *ptr) +{ + scc_disable_tx_interrupts(ptr); + scc_disable_rx_interrupts(ptr); +} + + +/*--------------------------------------------------------------------------- + * Internal support functions + *--------------------------------------------------------------------------*/ + +static void scc_setsignals(struct scc_port *port, int dtr, int rts) +{ + unsigned long flags; + unsigned char t; + SCC_ACCESS_INIT(port); + + local_irq_save(flags); + t = SCCread(TX_CTRL_REG); + if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR); + if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS); + SCCwrite(TX_CTRL_REG, t); + local_irq_restore(flags); +} + + +static void scc_send_xchar(struct tty_struct *tty, char ch) +{ + struct scc_port *port = tty->driver_data; + + port->x_char = ch; + if (ch) + scc_enable_tx_interrupts(port); +} + + +/*--------------------------------------------------------------------------- + * Driver entrypoints referenced from above + *--------------------------------------------------------------------------*/ + +static int scc_open (struct tty_struct * tty, struct file * filp) +{ + int line = tty->index; + int retval; + struct scc_port *port = &scc_ports[line]; + int i, channel = port->channel; + unsigned long flags; + SCC_ACCESS_INIT(port); +#if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC) + static const struct { + unsigned reg, val; + } mvme_init_tab[] = { + /* Values for MVME162 and MVME147 */ + /* no parity, 1 stop bit, async, 1:16 */ + { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, + /* parity error is special cond, ints disabled, no DMA */ + { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, + /* Rx 8 bits/char, no auto enable, Rx off */ + { RX_CTRL_REG, RCR_CHSIZE_8 }, + /* DTR off, Tx 8 bits/char, RTS off, Tx off */ + { TX_CTRL_REG, TCR_CHSIZE_8 }, + /* special features off */ + { AUX2_CTRL_REG, 0 }, + { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG }, + { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK }, + /* Start Rx */ + { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, + /* Start Tx */ + { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, + /* Ext/Stat ints: DCD only */ + { INT_CTRL_REG, ICR_ENAB_DCD_INT }, + /* Reset Ext/Stat ints */ + { COMMAND_REG, CR_EXTSTAT_RESET }, + /* ...again */ + { COMMAND_REG, CR_EXTSTAT_RESET }, + }; +#endif +#if defined(CONFIG_BVME6000_SCC) + static const struct { + unsigned reg, val; + } bvme_init_tab[] = { + /* Values for BVME6000 */ + /* no parity, 1 stop bit, async, 1:16 */ + { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, + /* parity error is special cond, ints disabled, no DMA */ + { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, + /* Rx 8 bits/char, no auto enable, Rx off */ + { RX_CTRL_REG, RCR_CHSIZE_8 }, + /* DTR off, Tx 8 bits/char, RTS off, Tx off */ + { TX_CTRL_REG, TCR_CHSIZE_8 }, + /* special features off */ + { AUX2_CTRL_REG, 0 }, + { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG }, + { DPLL_CTRL_REG, DCR_BRG_ENAB }, + /* Start Rx */ + { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, + /* Start Tx */ + { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, + /* Ext/Stat ints: DCD only */ + { INT_CTRL_REG, ICR_ENAB_DCD_INT }, + /* Reset Ext/Stat ints */ + { COMMAND_REG, CR_EXTSTAT_RESET }, + /* ...again */ + { COMMAND_REG, CR_EXTSTAT_RESET }, + }; +#endif + if (!(port->gs.port.flags & ASYNC_INITIALIZED)) { + local_irq_save(flags); +#if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC) + if (MACH_IS_MVME147 || MACH_IS_MVME16x) { + for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i) + SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val); + } +#endif +#if defined(CONFIG_BVME6000_SCC) + if (MACH_IS_BVME6000) { + for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i) + SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val); + } +#endif + + /* remember status register for detection of DCD and CTS changes */ + scc_last_status_reg[channel] = SCCread(STATUS_REG); + + port->c_dcd = 0; /* Prevent initial 1->0 interrupt */ + scc_setsignals (port, 1,1); + local_irq_restore(flags); + } + + tty->driver_data = port; + port->gs.port.tty = tty; + port->gs.port.count++; + retval = gs_init_port(&port->gs); + if (retval) { + port->gs.port.count--; + return retval; + } + port->gs.port.flags |= GS_ACTIVE; + retval = gs_block_til_ready(port, filp); + + if (retval) { + port->gs.port.count--; + return retval; + } + + port->c_dcd = tty_port_carrier_raised(&port->gs.port); + + scc_enable_rx_interrupts(port); + + return 0; +} + + +static void scc_throttle (struct tty_struct * tty) +{ + struct scc_port *port = tty->driver_data; + unsigned long flags; + SCC_ACCESS_INIT(port); + + if (tty->termios->c_cflag & CRTSCTS) { + local_irq_save(flags); + SCCmod(TX_CTRL_REG, ~TCR_RTS, 0); + local_irq_restore(flags); + } + if (I_IXOFF(tty)) + scc_send_xchar(tty, STOP_CHAR(tty)); +} + + +static void scc_unthrottle (struct tty_struct * tty) +{ + struct scc_port *port = tty->driver_data; + unsigned long flags; + SCC_ACCESS_INIT(port); + + if (tty->termios->c_cflag & CRTSCTS) { + local_irq_save(flags); + SCCmod(TX_CTRL_REG, 0xff, TCR_RTS); + local_irq_restore(flags); + } + if (I_IXOFF(tty)) + scc_send_xchar(tty, START_CHAR(tty)); +} + + +static int scc_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + + +static int scc_break_ctl(struct tty_struct *tty, int break_state) +{ + struct scc_port *port = tty->driver_data; + unsigned long flags; + SCC_ACCESS_INIT(port); + + local_irq_save(flags); + SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK, + break_state ? TCR_SEND_BREAK : 0); + local_irq_restore(flags); + return 0; +} + + +/*--------------------------------------------------------------------------- + * Serial console stuff... + *--------------------------------------------------------------------------*/ + +#define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0) + +static void scc_ch_write (char ch) +{ + volatile char *p = NULL; + +#ifdef CONFIG_MVME147_SCC + if (MACH_IS_MVME147) + p = (volatile char *)M147_SCC_A_ADDR; +#endif +#ifdef CONFIG_MVME162_SCC + if (MACH_IS_MVME16x) + p = (volatile char *)MVME_SCC_A_ADDR; +#endif +#ifdef CONFIG_BVME6000_SCC + if (MACH_IS_BVME6000) + p = (volatile char *)BVME_SCC_A_ADDR; +#endif + + do { + scc_delay(); + } + while (!(*p & 4)); + scc_delay(); + *p = 8; + scc_delay(); + *p = ch; +} + +/* The console must be locked when we get here. */ + +static void scc_console_write (struct console *co, const char *str, unsigned count) +{ + unsigned long flags; + + local_irq_save(flags); + + while (count--) + { + if (*str == '\n') + scc_ch_write ('\r'); + scc_ch_write (*str++); + } + local_irq_restore(flags); +} + +static struct tty_driver *scc_console_device(struct console *c, int *index) +{ + *index = c->index; + return scc_driver; +} + +static struct console sercons = { + .name = "ttyS", + .write = scc_console_write, + .device = scc_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + + +static int __init vme_scc_console_init(void) +{ + if (vme_brdtype == VME_TYPE_MVME147 || + vme_brdtype == VME_TYPE_MVME162 || + vme_brdtype == VME_TYPE_MVME172 || + vme_brdtype == VME_TYPE_BVME4000 || + vme_brdtype == VME_TYPE_BVME6000) + register_console(&sercons); + return 0; +} +console_initcall(vme_scc_console_init); -- cgit v1.2.2 From da3564ee027e788a5ff8e520fb2d2b00a78b2464 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:12 +0900 Subject: pch_uart: add multi-scatter processing Currently, this driver can handle only single scatterlist. Thus, it can't send data beyond FIFO size. This patch enables this driver can handle multiple scatter list. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 117 ++++++++++++++++++++++++++++++++---------- 1 file changed, 89 insertions(+), 28 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 3b2fb93e1fa1..c1386eb255d3 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -226,7 +226,8 @@ struct eg20t_port { struct pch_dma_slave param_rx; struct dma_chan *chan_tx; struct dma_chan *chan_rx; - struct scatterlist sg_tx; + struct scatterlist *sg_tx_p; + int nent; struct scatterlist sg_rx; int tx_dma_use; void *rx_buf_virt; @@ -595,16 +596,20 @@ static void pch_dma_rx_complete(void *arg) struct eg20t_port *priv = arg; struct uart_port *port = &priv->port; struct tty_struct *tty = tty_port_tty_get(&port->state->port); + int count; if (!tty) { pr_debug("%s:tty is busy now", __func__); return; } - if (dma_push_rx(priv, priv->trigger_level)) + dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE); + count = dma_push_rx(priv, priv->trigger_level); + if (count) tty_flip_buffer_push(tty); - tty_kref_put(tty); + async_tx_ack(priv->desc_rx); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); } static void pch_dma_tx_complete(void *arg) @@ -612,13 +617,21 @@ static void pch_dma_tx_complete(void *arg) struct eg20t_port *priv = arg; struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = priv->sg_tx_p; + int i; - xmit->tail += sg_dma_len(&priv->sg_tx); + for (i = 0; i < priv->nent; i++, sg++) { + xmit->tail += sg_dma_len(sg); + port->icount.tx += sg_dma_len(sg); + } xmit->tail &= UART_XMIT_SIZE - 1; - port->icount.tx += sg_dma_len(&priv->sg_tx); - async_tx_ack(priv->desc_tx); + dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE); priv->tx_dma_use = 0; + priv->nent = 0; + kfree(priv->sg_tx_p); + if (uart_circ_chars_pending(xmit)) + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); } static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) @@ -682,7 +695,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ - sg_dma_len(sg) = priv->fifo_size; + sg_dma_len(sg) = priv->trigger_level; sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & @@ -692,7 +705,8 @@ static int dma_handle_rx(struct eg20t_port *priv) desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, sg, 1, DMA_FROM_DEVICE, - DMA_PREP_INTERRUPT); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) return 0; @@ -731,6 +745,9 @@ static unsigned int handle_tx(struct eg20t_port *priv) fifo_size--; } size = min(xmit->head - xmit->tail, fifo_size); + if (size < 0) + size = fifo_size; + tx_size = pop_tx(priv, xmit->buf, size); if (tx_size > 0) { ret = pch_uart_hal_write(priv, xmit->buf, tx_size); @@ -740,8 +757,10 @@ static unsigned int handle_tx(struct eg20t_port *priv) priv->tx_empty = tx_empty; - if (tx_empty) + if (tx_empty) { pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + } return PCH_UART_HANDLED_TX_INT; } @@ -750,11 +769,16 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) { struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; - struct scatterlist *sg = &priv->sg_tx; + struct scatterlist *sg; int nent; int fifo_size; int tx_empty; struct dma_async_tx_descriptor *desc; + int num; + int i; + int bytes; + int size; + int rem; if (!priv->start_tx) { pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); @@ -772,37 +796,68 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) fifo_size--; } - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + bytes = min((int)CIRC_CNT(xmit->head, xmit->tail, + UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE)); + if (!bytes) { + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + return 0; + } + + if (bytes > fifo_size) { + num = bytes / fifo_size + 1; + size = fifo_size; + rem = bytes % fifo_size; + } else { + num = 1; + size = bytes; + rem = bytes; + } priv->tx_dma_use = 1; - sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */ + priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC); + + sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */ + sg = priv->sg_tx_p; - sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf), - UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK); + for (i = 0; i < num; i++, sg++) { + if (i == (num - 1)) + sg_set_page(sg, virt_to_page(xmit->buf), + rem, fifo_size * i); + else + sg_set_page(sg, virt_to_page(xmit->buf), + size, fifo_size * i); + } - nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE); + sg = priv->sg_tx_p; + nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE); if (!nent) { pr_err("%s:dma_map_sg Failed\n", __func__); return 0; } - - sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + - sg->offset; - sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, - UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, - xmit->tail, UART_XMIT_SIZE)); + priv->nent = nent; + + for (i = 0; i < nent; i++, sg++) { + sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) + + fifo_size * i; + sg_dma_address(sg) = (sg_dma_address(sg) & + ~(UART_XMIT_SIZE - 1)) + sg->offset; + if (i == (nent - 1)) + sg_dma_len(sg) = rem; + else + sg_dma_len(sg) = size; + } desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, - sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + priv->sg_tx_p, nent, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("%s:device_prep_slave_sg Failed\n", __func__); return 0; } - - dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); - + dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE); priv->desc_tx = desc; desc->callback = pch_dma_tx_complete; desc->callback_param = priv; @@ -857,10 +912,16 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) } break; case PCH_UART_IID_RDR: /* Received Data Ready */ - if (priv->use_dma) + if (priv->use_dma) { + pch_uart_hal_disable_interrupt(priv, + PCH_UART_HAL_RX_INT); ret = dma_handle_rx(priv); - else + if (!ret) + pch_uart_hal_enable_interrupt(priv, + PCH_UART_HAL_RX_INT); + } else { ret = handle_rx(priv); + } break; case PCH_UART_IID_RDR_TO: /* Received Data Ready (FIFO Timeout) */ -- cgit v1.2.2 From 7e4613296576c843643ceb97091d98da1e8caab8 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:13 +0900 Subject: pch_uart: add spin_lock_init Currently, spin_lock is not initialized. Thus, add spin_lock_init(). Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index c1386eb255d3..9e1b8652de7f 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1370,6 +1370,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, priv->port.line = num++; priv->trigger = PCH_UART_HAL_TRIGGER_M; + spin_lock_init(&priv->port.lock); + pci_set_drvdata(pdev, priv); pch_uart_hal_request(pdev, fifosize, base_baud); -- cgit v1.2.2 From 1822076cf324dde1eb9678ae2174dc8b4662417c Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:14 +0900 Subject: pch_uart : Reduce memcpy Reduce memcpy for performance improvement. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 9e1b8652de7f..0e171b8f0700 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -390,7 +390,7 @@ static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) return get_msr(priv, priv->membase); } -static int pch_uart_hal_write(struct eg20t_port *priv, +static void pch_uart_hal_write(struct eg20t_port *priv, const unsigned char *buf, int tx_size) { int i; @@ -400,7 +400,6 @@ static int pch_uart_hal_write(struct eg20t_port *priv, thr = buf[i++]; iowrite8(thr, priv->membase + PCH_UART_THR); } - return i; } static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, @@ -634,7 +633,7 @@ static void pch_dma_tx_complete(void *arg) pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); } -static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) +static int pop_tx(struct eg20t_port *priv, int size) { int count = 0; struct uart_port *port = &priv->port; @@ -647,7 +646,7 @@ static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) int cnt_to_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); int sz = min(size - count, cnt_to_end); - memcpy(&buf[count], &xmit->buf[xmit->tail], sz); + pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz); xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); count += sz; } while (!uart_circ_empty(xmit) && count < size); @@ -723,7 +722,6 @@ static unsigned int handle_tx(struct eg20t_port *priv) { struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; - int ret; int fifo_size; int tx_size; int size; @@ -748,10 +746,9 @@ static unsigned int handle_tx(struct eg20t_port *priv) if (size < 0) size = fifo_size; - tx_size = pop_tx(priv, xmit->buf, size); + tx_size = pop_tx(priv, size); if (tx_size > 0) { - ret = pch_uart_hal_write(priv, xmit->buf, tx_size); - port->icount.tx += ret; + port->icount.tx += tx_size; tx_empty = 0; } -- cgit v1.2.2 From 23877fdc6df3306037d81d2ac71c2d6e26ec08f4 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:15 +0900 Subject: pch_uart : Use dev_xxx not pr_xxx For easy to understad which port the message is out, replace pr_xxx with dev_xxx. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 77 +++++++++++++++++++++++++++---------------- 1 file changed, 49 insertions(+), 28 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 0e171b8f0700..68855351c76e 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -282,7 +282,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, div = DIV_ROUND(priv->base_baud / 16, baud); if (div < 0 || USHRT_MAX <= div) { - pr_err("Invalid Baud(div=0x%x)\n", div); + dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div); return -EINVAL; } @@ -290,17 +290,17 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, dlm = ((unsigned int)div >> 8) & 0x00FFU; if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { - pr_err("Invalid parity(0x%x)\n", parity); + dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity); return -EINVAL; } if (bits & ~PCH_UART_LCR_WLS) { - pr_err("Invalid bits(0x%x)\n", bits); + dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits); return -EINVAL; } if (stb & ~PCH_UART_LCR_STB) { - pr_err("Invalid STB(0x%x)\n", stb); + dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb); return -EINVAL; } @@ -308,7 +308,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, lcr |= bits; lcr |= stb; - pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", + dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", __func__, baud, div, lcr, jiffies); iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); iowrite8(dll, priv->membase + PCH_UART_DLL); @@ -322,7 +322,8 @@ static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, unsigned int flag) { if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { - pr_err("%s:Invalid flag(0x%x)\n", __func__, flag); + dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n", + __func__, flag); return -EINVAL; } @@ -341,17 +342,20 @@ static int pch_uart_hal_set_fifo(struct eg20t_port *priv, u8 fcr; if (dmamode & ~PCH_UART_FCR_DMS) { - pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode); + dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n", + __func__, dmamode); return -EINVAL; } if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { - pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size); + dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n", + __func__, fifo_size); return -EINVAL; } if (trigger & ~PCH_UART_FCR_RFTL) { - pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger); + dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n", + __func__, trigger); return -EINVAL; } @@ -455,7 +459,7 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf, port = &priv->port; tty = tty_port_tty_get(&port->state->port); if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return -EBUSY; } @@ -472,8 +476,8 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) struct uart_port *port = &priv->port; if (port->x_char) { - pr_debug("%s:X character send %02x (%lu)\n", __func__, - port->x_char, jiffies); + dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n", + __func__, port->x_char, jiffies); buf[0] = port->x_char; port->x_char = 0; ret = 1; @@ -493,7 +497,7 @@ static int dma_push_rx(struct eg20t_port *priv, int size) port = &priv->port; tty = tty_port_tty_get(&port->state->port); if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return 0; } @@ -567,7 +571,8 @@ static void pch_request_dma(struct uart_port *port) param->tx_reg = port->mapbase + UART_TX; chan = dma_request_channel(mask, filter, param); if (!chan) { - pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__); + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n", + __func__); return; } priv->chan_tx = chan; @@ -579,7 +584,8 @@ static void pch_request_dma(struct uart_port *port) param->rx_reg = port->mapbase + UART_RX; chan = dma_request_channel(mask, filter, param); if (!chan) { - pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__); + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", + __func__); dma_release_channel(priv->chan_tx); return; } @@ -598,7 +604,7 @@ static void pch_dma_rx_complete(void *arg) int count; if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return; } @@ -652,7 +658,7 @@ static int pop_tx(struct eg20t_port *priv, int size) } while (!uart_circ_empty(xmit) && count < size); pop_tx_end: - pr_debug("%d characters. Remained %d characters. (%lu)\n", + dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n", count, size - count, jiffies); return count; @@ -728,7 +734,8 @@ static unsigned int handle_tx(struct eg20t_port *priv) int tx_empty; if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); priv->tx_empty = 1; return 0; @@ -778,7 +785,8 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) int rem; if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); priv->tx_empty = 1; return 0; @@ -797,6 +805,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); if (!bytes) { + dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); uart_write_wakeup(port); return 0; @@ -812,6 +821,9 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) rem = bytes; } + dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n", + __func__, num, size, rem); + priv->tx_dma_use = 1; priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC); @@ -831,7 +843,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) sg = priv->sg_tx_p; nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE); if (!nent) { - pr_err("%s:dma_map_sg Failed\n", __func__); + dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__); return 0; } priv->nent = nent; @@ -851,7 +863,8 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) priv->sg_tx_p, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { - pr_err("%s:device_prep_slave_sg Failed\n", __func__); + dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n", + __func__); return 0; } dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE); @@ -935,7 +948,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) ret = PCH_UART_HANDLED_MS_INT; break; default: /* Never junp to this label */ - pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies); + dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__, + iid, jiffies); ret = -1; break; } @@ -1024,9 +1038,13 @@ static void pch_uart_start_tx(struct uart_port *port) priv = container_of(port, struct eg20t_port, port); - if (priv->use_dma) - if (priv->tx_dma_use) + if (priv->use_dma) { + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n", + __func__); return; + } + } priv->start_tx = 1; pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); @@ -1142,7 +1160,8 @@ static void pch_uart_shutdown(struct uart_port *port) ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); if (ret) - pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); + dev_err(priv->port.dev, + "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); if (priv->use_dma_flag) pch_free_dma(port); @@ -1263,17 +1282,19 @@ static int pch_uart_verify_port(struct uart_port *port, priv = container_of(port, struct eg20t_port, port); if (serinfo->flags & UPF_LOW_LATENCY) { - pr_info("PCH UART : Use PIO Mode (without DMA)\n"); + dev_info(priv->port.dev, + "PCH UART : Use PIO Mode (without DMA)\n"); priv->use_dma = 0; serinfo->flags &= ~UPF_LOW_LATENCY; } else { #ifndef CONFIG_PCH_DMA - pr_err("%s : PCH DMA is not Loaded.\n", __func__); + dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n", + __func__); return -EOPNOTSUPP; #endif priv->use_dma = 1; priv->use_dma_flag = 1; - pr_info("PCH UART : Use DMA Mode\n"); + dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n"); } return 0; -- cgit v1.2.2 From aac6c0b0fd6458f166651fc102695fb8836a4d95 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:16 +0900 Subject: pch_uart: fix uart clock setting issue Currently, uart clock is not set correctly. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 68855351c76e..189886122516 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1089,7 +1089,12 @@ static int pch_uart_startup(struct uart_port *port) priv = container_of(port, struct eg20t_port, port); priv->tx_empty = 1; - port->uartclk = priv->base_baud; + + if (port->uartclk) + priv->base_baud = port->uartclk; + else + port->uartclk = priv->base_baud; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); ret = pch_uart_hal_set_line(priv, default_baud, PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, -- cgit v1.2.2 From 9af7155bb03675ba2d4d68428a4345e0511ce8dd Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:17 +0900 Subject: pch_uart: fix auto flow control miss-setting issue Currently, auto-flow control setting processing is not set correctly. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 189886122516..0c95051fa0a4 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -218,6 +218,7 @@ struct eg20t_port { struct pch_uart_buffer rxbuf; unsigned int dmsr; unsigned int fcr; + unsigned int mcr; unsigned int use_dma; unsigned int use_dma_flag; struct dma_async_tx_descriptor *desc_tx; @@ -1007,7 +1008,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port) static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { u32 mcr = 0; - unsigned int dat; struct eg20t_port *priv = container_of(port, struct eg20t_port, port); if (mctrl & TIOCM_DTR) @@ -1017,11 +1017,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - if (mctrl) { - dat = pch_uart_get_mctrl(port); - dat |= mcr; - iowrite8(dat, priv->membase + UART_MCR); - } + if (priv->mcr & UART_MCR_AFE) + mcr |= UART_MCR_AFE; + + if (mctrl) + iowrite8(mcr, priv->membase + UART_MCR); } static void pch_uart_stop_tx(struct uart_port *port) @@ -1215,6 +1215,13 @@ static void pch_uart_set_termios(struct uart_port *port, } else { parity = PCH_UART_HAL_PARITY_NONE; } + + /* Only UART0 has auto hardware flow function */ + if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256)) + priv->mcr |= UART_MCR_AFE; + else + priv->mcr &= ~UART_MCR_AFE; + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); -- cgit v1.2.2 From 60d1031e114a3e96e4420421e34ddc0dcd10cbae Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:18 +0900 Subject: pch_uart: fix exclusive access issue Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 0c95051fa0a4..da0ba0fa2b99 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -636,8 +636,7 @@ static void pch_dma_tx_complete(void *arg) priv->tx_dma_use = 0; priv->nent = 0; kfree(priv->sg_tx_p); - if (uart_circ_chars_pending(xmit)) - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); } static int pop_tx(struct eg20t_port *priv, int size) @@ -793,6 +792,14 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) return 0; } + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + fifo_size = max(priv->fifo_size, 1); tx_empty = 1; if (pop_tx_x(priv, xmit->buf)) { -- cgit v1.2.2 From fec38d1752c01ad72789bac9f1a128f7e933735d Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:19 +0900 Subject: pch_uart: Fix DMA channel miss-setting issue. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 59 ++++++++++++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 12 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index da0ba0fa2b99..a5ce9a5c018d 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -235,6 +235,36 @@ struct eg20t_port { dma_addr_t rx_buf_dma; }; +/** + * struct pch_uart_driver_data - private data structure for UART-DMA + * @port_type: The number of DMA channel + * @line_no: UART port line number (0, 1, 2...) + */ +struct pch_uart_driver_data { + int port_type; + int line_no; +}; + +enum pch_uart_num_t { + pch_et20t_uart0 = 0, + pch_et20t_uart1, + pch_et20t_uart2, + pch_et20t_uart3, + pch_ml7213_uart0, + pch_ml7213_uart1, + pch_ml7213_uart2, +}; + +static struct pch_uart_driver_data drv_dat[] = { + [pch_et20t_uart0] = {PCH_UART_8LINE, 0}, + [pch_et20t_uart1] = {PCH_UART_2LINE, 1}, + [pch_et20t_uart2] = {PCH_UART_2LINE, 2}, + [pch_et20t_uart3] = {PCH_UART_2LINE, 3}, + [pch_ml7213_uart0] = {PCH_UART_8LINE, 0}, + [pch_ml7213_uart1] = {PCH_UART_2LINE, 1}, + [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, +}; + static unsigned int default_baud = 9600; static const int trigger_level_256[4] = { 1, 64, 128, 224 }; static const int trigger_level_64[4] = { 1, 16, 32, 56 }; @@ -568,7 +598,8 @@ static void pch_request_dma(struct uart_port *port) /* Set Tx DMA */ param = &priv->param_tx; param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line; + param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */ + param->tx_reg = port->mapbase + UART_TX; chan = dma_request_channel(mask, filter, param); if (!chan) { @@ -581,7 +612,8 @@ static void pch_request_dma(struct uart_port *port) /* Set Rx DMA */ param = &priv->param_rx; param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */ + param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */ + param->rx_reg = port->mapbase + UART_RX; chan = dma_request_channel(mask, filter, param); if (!chan) { @@ -1358,8 +1390,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, unsigned int mapbase; unsigned char *rxbuf; int fifosize, base_baud; - static int num; - int port_type = id->driver_data; + int port_type; + struct pch_uart_driver_data *board; + + board = &drv_dat[id->driver_data]; + port_type = board->port_type; priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); if (priv == NULL) @@ -1404,7 +1439,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, priv->port.ops = &pch_uart_ops; priv->port.flags = UPF_BOOT_AUTOCONF; priv->port.fifosize = fifosize; - priv->port.line = num++; + priv->port.line = board->line_no; priv->trigger = PCH_UART_HAL_TRIGGER_M; spin_lock_init(&priv->port.lock); @@ -1482,19 +1517,19 @@ static int pch_uart_pci_resume(struct pci_dev *pdev) static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), - .driver_data = PCH_UART_8LINE}, + .driver_data = pch_et20t_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart1}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart2}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart3}, {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027), - .driver_data = PCH_UART_8LINE}, + .driver_data = pch_ml7213_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_ml7213_uart1}, {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_ml7213_uart2}, {0,}, }; -- cgit v1.2.2 From 310388beea4d00bb1c56e81ded82bdc25bdcf719 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 25 Feb 2011 09:53:41 -0800 Subject: tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile This caused a build error. Many thanks to Stephen Rothwell for pointing this mistake out. Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman --- drivers/char/pcmcia/Makefile | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile index be8f287aa398..0aae20985d57 100644 --- a/drivers/char/pcmcia/Makefile +++ b/drivers/char/pcmcia/Makefile @@ -4,8 +4,6 @@ # Makefile for the Linux PCMCIA char device drivers. # -obj-y += ipwireless/ - obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o -- cgit v1.2.2 From 65c56e073e4fd10385283561b91189572e33b519 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 25 Feb 2011 14:28:30 +0100 Subject: tty: phase out of ioctl file pointer for tty3270 as well The patch "tty: now phase out the ioctl file pointer for good" missed the tty3270 driver. This is the missing piece. Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman --- drivers/s390/char/keyboard.c | 4 +--- drivers/s390/char/keyboard.h | 2 +- drivers/s390/char/tty3270.c | 14 ++++++-------- 3 files changed, 8 insertions(+), 12 deletions(-) diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c index 8cd58e412b5e..d6673345c5f4 100644 --- a/drivers/s390/char/keyboard.c +++ b/drivers/s390/char/keyboard.c @@ -455,9 +455,7 @@ do_kdgkb_ioctl(struct kbd_data *kbd, struct kbsentry __user *u_kbs, return 0; } -int -kbd_ioctl(struct kbd_data *kbd, struct file *file, - unsigned int cmd, unsigned long arg) +int kbd_ioctl(struct kbd_data *kbd, unsigned int cmd, unsigned long arg) { void __user *argp; int ct, perm; diff --git a/drivers/s390/char/keyboard.h b/drivers/s390/char/keyboard.h index 5ccfe9cf126d..7e736aaeae6e 100644 --- a/drivers/s390/char/keyboard.h +++ b/drivers/s390/char/keyboard.h @@ -36,7 +36,7 @@ void kbd_free(struct kbd_data *); void kbd_ascebc(struct kbd_data *, unsigned char *); void kbd_keycode(struct kbd_data *, unsigned int); -int kbd_ioctl(struct kbd_data *, struct file *, unsigned int, unsigned long); +int kbd_ioctl(struct kbd_data *, unsigned int, unsigned long); /* * Helper Functions. diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index 911822db614d..d33554df2b06 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -1718,9 +1718,8 @@ tty3270_wait_until_sent(struct tty_struct *tty, int timeout) { } -static int -tty3270_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) +static int tty3270_ioctl(struct tty_struct *tty, unsigned int cmd, + unsigned long arg) { struct tty3270 *tp; @@ -1729,13 +1728,12 @@ tty3270_ioctl(struct tty_struct *tty, struct file *file, return -ENODEV; if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; - return kbd_ioctl(tp->kbd, file, cmd, arg); + return kbd_ioctl(tp->kbd, cmd, arg); } #ifdef CONFIG_COMPAT -static long -tty3270_compat_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) +static long tty3270_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) { struct tty3270 *tp; @@ -1744,7 +1742,7 @@ tty3270_compat_ioctl(struct tty_struct *tty, struct file *file, return -ENODEV; if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; - return kbd_ioctl(tp->kbd, file, cmd, (unsigned long)compat_ptr(arg)); + return kbd_ioctl(tp->kbd, cmd, (unsigned long)compat_ptr(arg)); } #endif -- cgit v1.2.2 From a2e6093c638a9846cfe81b84ea9a0643f9540c1f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 22 Feb 2011 21:42:01 -0800 Subject: MAINTAINERS: Update HVC file patterns Commit 728674a7e466628df2aeec6d11a2ae1ef968fb67 ("tty: move hvc drivers to drivers/tty/hvc/") moved the files, update the patterns as appropriate. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5099856ee15e..ab3a9ac2e212 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2819,7 +2819,7 @@ F: mm/hwpoison-inject.c HYPERVISOR VIRTUAL CONSOLE DRIVER L: linuxppc-dev@lists.ozlabs.org S: Odd Fixes -F: drivers/char/hvc_* +F: drivers/tty/hvc/ iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER M: Peter Jones @@ -6090,7 +6090,7 @@ M: Chris Metcalf W: http://www.tilera.com/scm/ S: Supported F: arch/tile/ -F: drivers/char/hvc_tile.c +F: drivers/tty/hvc/hvc_tile.c F: drivers/net/tile/ TLAN NETWORK DRIVER -- cgit v1.2.2 From 8c6e9112ebc7ba5a782e986152c8e766dad1486f Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 22 Feb 2011 19:12:21 -0700 Subject: tty/serial: Relax the device_type restriction from of_serial There is no need to test for a device_type property in ns8250 compatible serial ports. device_type is an OpenFirmware property that is not required when using the flattened tree representation. Signed-off-by: Grant Likely Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/of_serial.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 5c7abe4c94dd..6a18ca6ddaa9 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -160,17 +160,17 @@ static int of_platform_serial_remove(struct platform_device *ofdev) * A few common types, add more as needed. */ static struct of_device_id __devinitdata of_platform_serial_table[] = { - { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, - { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, - { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, - { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, - { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, - { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, + { .compatible = "ns8250", .data = (void *)PORT_8250, }, + { .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .compatible = "ns16550a", .data = (void *)PORT_16550A, }, + { .compatible = "ns16550", .data = (void *)PORT_16550, }, + { .compatible = "ns16750", .data = (void *)PORT_16750, }, + { .compatible = "ns16850", .data = (void *)PORT_16850, }, #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - { .type = "serial", .compatible = "ibm,qpace-nwp-serial", - .data = (void *)PORT_NWPSERIAL, }, + { .compatible = "ibm,qpace-nwp-serial", + .data = (void *)PORT_NWPSERIAL, }, #endif - { .type = "serial", .data = (void *)PORT_UNKNOWN, }, + { .type = "serial", .data = (void *)PORT_UNKNOWN, }, { /* end of list */ }, }; -- cgit v1.2.2 From 2c590f3ca99c193a04fe90ec89046138b66fcc1e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 24 Jan 2011 17:54:48 +0100 Subject: nozomi: don't use flush_scheduled_work() flush_scheduled_work() in tty_exit() doesn't seem to target any specific work. If it was to flush work items used in tty generic layer, they're already flushed properly during tty release. flush_scheduled_work() is going away. Remove the seemingly redundant usage. Signed-off-by: Tejun Heo Cc: Jiri Slaby Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/nozomi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index 513ba12064ea..f4f11164efe5 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -1514,8 +1514,6 @@ static void __devexit tty_exit(struct nozomi *dc) DBG1(" "); - flush_scheduled_work(); - for (i = 0; i < MAX_PORT; ++i) { struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port); if (tty && list_empty(&tty->hangup_work.entry)) -- cgit v1.2.2 From c976cc3aa99e813084fc4bd295c9f7b706738b48 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 28 Feb 2011 22:28:31 +0300 Subject: Staging: generic_serial: fix double locking bug spin_lock_irqsave() is not nestable. The second time that it gets called it overwrites the "flags" variable and so IRQs can't be restored properly. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/generic_serial/generic_serial.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/generic_serial/generic_serial.c b/drivers/staging/generic_serial/generic_serial.c index 5954ee1dc953..466988dbc37d 100644 --- a/drivers/staging/generic_serial/generic_serial.c +++ b/drivers/staging/generic_serial/generic_serial.c @@ -566,9 +566,9 @@ void gs_close(struct tty_struct * tty, struct file * filp) * line status register. */ - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock(&port->driver_lock); port->rd->disable_rx_interrupts (port); - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock(&port->driver_lock); spin_unlock_irqrestore(&port->port.lock, flags); /* close has no way of returning "EINTR", so discard return value */ -- cgit v1.2.2 From 751b3840d216f1ecd3b91ff5251bf7703b690cd8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 1 Mar 2011 13:12:47 +0800 Subject: pcmcia: synclink_cs: fix prototype for mgslpc_ioctl() The ioctl file pointer was removed in commit 6caa76 "tty: now phase out the ioctl file pointer for good". Thus fix the prototype for mgslpc_ioctl() and eliminate below warning: CC [M] drivers/char/pcmcia/synclink_cs.o drivers/char/pcmcia/synclink_cs.c:2787: warning: initialization from incompatible pointer type Signed-off-by: Axel Lin Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/pcmcia/synclink_cs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 02127cad0980..beca80bb9bdb 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2222,13 +2222,12 @@ static int mgslpc_get_icount(struct tty_struct *tty, * Arguments: * * tty pointer to tty instance data - * file pointer to associated file object for device * cmd IOCTL command code * arg command argument/context * * Return Value: 0 if success, otherwise error code */ -static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, +static int mgslpc_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; -- cgit v1.2.2 From 8d971e98a7be749445ac6eb9eb37b116f1a6d3c0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 7 Mar 2011 12:03:07 -0800 Subject: Staging: tty: fix build with epca.c driver I forgot to move the digi*.h files from drivers/char/ to drivers/staging/tty/ Thanks to Randy for pointing out the issue. Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/char/digi1.h | 100 ------------------------------ drivers/char/digiFep1.h | 136 ----------------------------------------- drivers/char/digiPCI.h | 42 ------------- drivers/staging/tty/digi1.h | 100 ++++++++++++++++++++++++++++++ drivers/staging/tty/digiFep1.h | 136 +++++++++++++++++++++++++++++++++++++++++ drivers/staging/tty/digiPCI.h | 42 +++++++++++++ 6 files changed, 278 insertions(+), 278 deletions(-) delete mode 100644 drivers/char/digi1.h delete mode 100644 drivers/char/digiFep1.h delete mode 100644 drivers/char/digiPCI.h create mode 100644 drivers/staging/tty/digi1.h create mode 100644 drivers/staging/tty/digiFep1.h create mode 100644 drivers/staging/tty/digiPCI.h diff --git a/drivers/char/digi1.h b/drivers/char/digi1.h deleted file mode 100644 index 94d4eab5d3ca..000000000000 --- a/drivers/char/digi1.h +++ /dev/null @@ -1,100 +0,0 @@ -/* Definitions for DigiBoard ditty(1) command. */ - -#if !defined(TIOCMODG) -#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */ -#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */ -#endif - -#if !defined(TIOCMSET) -#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */ -#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */ -#endif - -#if !defined(TIOCMBIC) -#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */ -#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */ -#endif - -#if !defined(TIOCSDTR) -#define TIOCSDTR (('e'<<8) | 0) /* set DTR */ -#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */ -#endif - -/************************************************************************ - * Ioctl command arguments for DIGI parameters. - ************************************************************************/ -#define DIGI_GETA (('e'<<8) | 94) /* Read params */ - -#define DIGI_SETA (('e'<<8) | 95) /* Set params */ -#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */ -#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */ - -#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */ - /* control characters */ -#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */ - /* control characters */ -#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */ - /* flow control chars */ -#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */ - /* flow control chars */ - -#define DIGI_GETINFO (('e'<<8) | 103) /* Fill in digi_info */ -#define DIGI_POLLER (('e'<<8) | 104) /* Turn on/off poller */ -#define DIGI_INIT (('e'<<8) | 105) /* Allow things to run. */ - -struct digiflow_struct -{ - unsigned char startc; /* flow cntl start char */ - unsigned char stopc; /* flow cntl stop char */ -}; - -typedef struct digiflow_struct digiflow_t; - - -/************************************************************************ - * Values for digi_flags - ************************************************************************/ -#define DIGI_IXON 0x0001 /* Handle IXON in the FEP */ -#define DIGI_FAST 0x0002 /* Fast baud rates */ -#define RTSPACE 0x0004 /* RTS input flow control */ -#define CTSPACE 0x0008 /* CTS output flow control */ -#define DSRPACE 0x0010 /* DSR output flow control */ -#define DCDPACE 0x0020 /* DCD output flow control */ -#define DTRPACE 0x0040 /* DTR input flow control */ -#define DIGI_FORCEDCD 0x0100 /* Force carrier */ -#define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */ -#define DIGI_AIXON 0x0400 /* Aux flow control in fep */ - - -/************************************************************************ - * Values for digiDload - ************************************************************************/ -#define NORMAL 0 -#define PCI_CTL 1 - -#define SIZE8 0 -#define SIZE16 1 -#define SIZE32 2 - -/************************************************************************ - * Structure used with ioctl commands for DIGI parameters. - ************************************************************************/ -struct digi_struct -{ - unsigned short digi_flags; /* Flags (see above) */ -}; - -typedef struct digi_struct digi_t; - -struct digi_info -{ - unsigned long board; /* Which board is this ? */ - unsigned char status; /* Alive or dead */ - unsigned char type; /* see epca.h */ - unsigned char subtype; /* For future XEM, XR, etc ... */ - unsigned short numports; /* Number of ports configured */ - unsigned char *port; /* I/O Address */ - unsigned char *membase; /* DPR Address */ - unsigned char *version; /* For future ... */ - unsigned short windowData; /* For future ... */ -} ; diff --git a/drivers/char/digiFep1.h b/drivers/char/digiFep1.h deleted file mode 100644 index 3c1f1922c798..000000000000 --- a/drivers/char/digiFep1.h +++ /dev/null @@ -1,136 +0,0 @@ - -#define CSTART 0x400L -#define CMAX 0x800L -#define ISTART 0x800L -#define IMAX 0xC00L -#define CIN 0xD10L -#define GLOBAL 0xD10L -#define EIN 0xD18L -#define FEPSTAT 0xD20L -#define CHANSTRUCT 0x1000L -#define RXTXBUF 0x4000L - - -struct global_data -{ - u16 cin; - u16 cout; - u16 cstart; - u16 cmax; - u16 ein; - u16 eout; - u16 istart; - u16 imax; -}; - - -struct board_chan -{ - u32 filler1; - u32 filler2; - u16 tseg; - u16 tin; - u16 tout; - u16 tmax; - - u16 rseg; - u16 rin; - u16 rout; - u16 rmax; - - u16 tlow; - u16 rlow; - u16 rhigh; - u16 incr; - - u16 etime; - u16 edelay; - unchar *dev; - - u16 iflag; - u16 oflag; - u16 cflag; - u16 gmask; - - u16 col; - u16 delay; - u16 imask; - u16 tflush; - - u32 filler3; - u32 filler4; - u32 filler5; - u32 filler6; - - u8 num; - u8 ract; - u8 bstat; - u8 tbusy; - u8 iempty; - u8 ilow; - u8 idata; - u8 eflag; - - u8 tflag; - u8 rflag; - u8 xmask; - u8 xval; - u8 mstat; - u8 mchange; - u8 mint; - u8 lstat; - - u8 mtran; - u8 orun; - u8 startca; - u8 stopca; - u8 startc; - u8 stopc; - u8 vnext; - u8 hflow; - - u8 fillc; - u8 ochar; - u8 omask; - - u8 filler7; - u8 filler8[28]; -}; - - -#define SRXLWATER 0xE0 -#define SRXHWATER 0xE1 -#define STOUT 0xE2 -#define PAUSETX 0xE3 -#define RESUMETX 0xE4 -#define SAUXONOFFC 0xE6 -#define SENDBREAK 0xE8 -#define SETMODEM 0xE9 -#define SETIFLAGS 0xEA -#define SONOFFC 0xEB -#define STXLWATER 0xEC -#define PAUSERX 0xEE -#define RESUMERX 0xEF -#define SETBUFFER 0xF2 -#define SETCOOKED 0xF3 -#define SETHFLOW 0xF4 -#define SETCTRLFLAGS 0xF5 -#define SETVNEXT 0xF6 - - - -#define BREAK_IND 0x01 -#define LOWTX_IND 0x02 -#define EMPTYTX_IND 0x04 -#define DATA_IND 0x08 -#define MODEMCHG_IND 0x20 - -#define FEP_HUPCL 0002000 -#if 0 -#define RTS 0x02 -#define CD 0x08 -#define DSR 0x10 -#define CTS 0x20 -#define RI 0x40 -#define DTR 0x80 -#endif diff --git a/drivers/char/digiPCI.h b/drivers/char/digiPCI.h deleted file mode 100644 index 6ca7819e5069..000000000000 --- a/drivers/char/digiPCI.h +++ /dev/null @@ -1,42 +0,0 @@ -/************************************************************************* - * Defines and structure definitions for PCI BIOS Interface - *************************************************************************/ -#define PCIMAX 32 /* maximum number of PCI boards */ - - -#define PCI_VENDOR_DIGI 0x114F -#define PCI_DEVICE_EPC 0x0002 -#define PCI_DEVICE_RIGHTSWITCH 0x0003 /* For testing */ -#define PCI_DEVICE_XEM 0x0004 -#define PCI_DEVICE_XR 0x0005 -#define PCI_DEVICE_CX 0x0006 -#define PCI_DEVICE_XRJ 0x0009 /* Jupiter boards with */ -#define PCI_DEVICE_EPCJ 0x000a /* PLX 9060 chip for PCI */ - - -/* - * On the PCI boards, there is no IO space allocated - * The I/O registers will be in the first 3 bytes of the - * upper 2MB of the 4MB memory space. The board memory - * will be mapped into the low 2MB of the 4MB memory space - */ - -/* Potential location of PCI Bios from E0000 to FFFFF*/ -#define PCI_BIOS_SIZE 0x00020000 - -/* Size of Memory and I/O for PCI (4MB) */ -#define PCI_RAM_SIZE 0x00400000 - -/* Size of Memory (2MB) */ -#define PCI_MEM_SIZE 0x00200000 - -/* Offset of I/0 in Memory (2MB) */ -#define PCI_IO_OFFSET 0x00200000 - -#define MEMOUTB(basemem, pnum, setmemval) *(caddr_t)((basemem) + ( PCI_IO_OFFSET | pnum << 4 | pnum )) = (setmemval) -#define MEMINB(basemem, pnum) *(caddr_t)((basemem) + (PCI_IO_OFFSET | pnum << 4 | pnum )) /* for PCI I/O */ - - - - - diff --git a/drivers/staging/tty/digi1.h b/drivers/staging/tty/digi1.h new file mode 100644 index 000000000000..94d4eab5d3ca --- /dev/null +++ b/drivers/staging/tty/digi1.h @@ -0,0 +1,100 @@ +/* Definitions for DigiBoard ditty(1) command. */ + +#if !defined(TIOCMODG) +#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */ +#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */ +#endif + +#if !defined(TIOCMSET) +#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */ +#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */ +#endif + +#if !defined(TIOCMBIC) +#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */ +#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */ +#endif + +#if !defined(TIOCSDTR) +#define TIOCSDTR (('e'<<8) | 0) /* set DTR */ +#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */ +#endif + +/************************************************************************ + * Ioctl command arguments for DIGI parameters. + ************************************************************************/ +#define DIGI_GETA (('e'<<8) | 94) /* Read params */ + +#define DIGI_SETA (('e'<<8) | 95) /* Set params */ +#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */ +#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */ + +#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */ + /* control characters */ +#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */ + /* control characters */ +#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */ + /* flow control chars */ +#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */ + /* flow control chars */ + +#define DIGI_GETINFO (('e'<<8) | 103) /* Fill in digi_info */ +#define DIGI_POLLER (('e'<<8) | 104) /* Turn on/off poller */ +#define DIGI_INIT (('e'<<8) | 105) /* Allow things to run. */ + +struct digiflow_struct +{ + unsigned char startc; /* flow cntl start char */ + unsigned char stopc; /* flow cntl stop char */ +}; + +typedef struct digiflow_struct digiflow_t; + + +/************************************************************************ + * Values for digi_flags + ************************************************************************/ +#define DIGI_IXON 0x0001 /* Handle IXON in the FEP */ +#define DIGI_FAST 0x0002 /* Fast baud rates */ +#define RTSPACE 0x0004 /* RTS input flow control */ +#define CTSPACE 0x0008 /* CTS output flow control */ +#define DSRPACE 0x0010 /* DSR output flow control */ +#define DCDPACE 0x0020 /* DCD output flow control */ +#define DTRPACE 0x0040 /* DTR input flow control */ +#define DIGI_FORCEDCD 0x0100 /* Force carrier */ +#define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */ +#define DIGI_AIXON 0x0400 /* Aux flow control in fep */ + + +/************************************************************************ + * Values for digiDload + ************************************************************************/ +#define NORMAL 0 +#define PCI_CTL 1 + +#define SIZE8 0 +#define SIZE16 1 +#define SIZE32 2 + +/************************************************************************ + * Structure used with ioctl commands for DIGI parameters. + ************************************************************************/ +struct digi_struct +{ + unsigned short digi_flags; /* Flags (see above) */ +}; + +typedef struct digi_struct digi_t; + +struct digi_info +{ + unsigned long board; /* Which board is this ? */ + unsigned char status; /* Alive or dead */ + unsigned char type; /* see epca.h */ + unsigned char subtype; /* For future XEM, XR, etc ... */ + unsigned short numports; /* Number of ports configured */ + unsigned char *port; /* I/O Address */ + unsigned char *membase; /* DPR Address */ + unsigned char *version; /* For future ... */ + unsigned short windowData; /* For future ... */ +} ; diff --git a/drivers/staging/tty/digiFep1.h b/drivers/staging/tty/digiFep1.h new file mode 100644 index 000000000000..3c1f1922c798 --- /dev/null +++ b/drivers/staging/tty/digiFep1.h @@ -0,0 +1,136 @@ + +#define CSTART 0x400L +#define CMAX 0x800L +#define ISTART 0x800L +#define IMAX 0xC00L +#define CIN 0xD10L +#define GLOBAL 0xD10L +#define EIN 0xD18L +#define FEPSTAT 0xD20L +#define CHANSTRUCT 0x1000L +#define RXTXBUF 0x4000L + + +struct global_data +{ + u16 cin; + u16 cout; + u16 cstart; + u16 cmax; + u16 ein; + u16 eout; + u16 istart; + u16 imax; +}; + + +struct board_chan +{ + u32 filler1; + u32 filler2; + u16 tseg; + u16 tin; + u16 tout; + u16 tmax; + + u16 rseg; + u16 rin; + u16 rout; + u16 rmax; + + u16 tlow; + u16 rlow; + u16 rhigh; + u16 incr; + + u16 etime; + u16 edelay; + unchar *dev; + + u16 iflag; + u16 oflag; + u16 cflag; + u16 gmask; + + u16 col; + u16 delay; + u16 imask; + u16 tflush; + + u32 filler3; + u32 filler4; + u32 filler5; + u32 filler6; + + u8 num; + u8 ract; + u8 bstat; + u8 tbusy; + u8 iempty; + u8 ilow; + u8 idata; + u8 eflag; + + u8 tflag; + u8 rflag; + u8 xmask; + u8 xval; + u8 mstat; + u8 mchange; + u8 mint; + u8 lstat; + + u8 mtran; + u8 orun; + u8 startca; + u8 stopca; + u8 startc; + u8 stopc; + u8 vnext; + u8 hflow; + + u8 fillc; + u8 ochar; + u8 omask; + + u8 filler7; + u8 filler8[28]; +}; + + +#define SRXLWATER 0xE0 +#define SRXHWATER 0xE1 +#define STOUT 0xE2 +#define PAUSETX 0xE3 +#define RESUMETX 0xE4 +#define SAUXONOFFC 0xE6 +#define SENDBREAK 0xE8 +#define SETMODEM 0xE9 +#define SETIFLAGS 0xEA +#define SONOFFC 0xEB +#define STXLWATER 0xEC +#define PAUSERX 0xEE +#define RESUMERX 0xEF +#define SETBUFFER 0xF2 +#define SETCOOKED 0xF3 +#define SETHFLOW 0xF4 +#define SETCTRLFLAGS 0xF5 +#define SETVNEXT 0xF6 + + + +#define BREAK_IND 0x01 +#define LOWTX_IND 0x02 +#define EMPTYTX_IND 0x04 +#define DATA_IND 0x08 +#define MODEMCHG_IND 0x20 + +#define FEP_HUPCL 0002000 +#if 0 +#define RTS 0x02 +#define CD 0x08 +#define DSR 0x10 +#define CTS 0x20 +#define RI 0x40 +#define DTR 0x80 +#endif diff --git a/drivers/staging/tty/digiPCI.h b/drivers/staging/tty/digiPCI.h new file mode 100644 index 000000000000..6ca7819e5069 --- /dev/null +++ b/drivers/staging/tty/digiPCI.h @@ -0,0 +1,42 @@ +/************************************************************************* + * Defines and structure definitions for PCI BIOS Interface + *************************************************************************/ +#define PCIMAX 32 /* maximum number of PCI boards */ + + +#define PCI_VENDOR_DIGI 0x114F +#define PCI_DEVICE_EPC 0x0002 +#define PCI_DEVICE_RIGHTSWITCH 0x0003 /* For testing */ +#define PCI_DEVICE_XEM 0x0004 +#define PCI_DEVICE_XR 0x0005 +#define PCI_DEVICE_CX 0x0006 +#define PCI_DEVICE_XRJ 0x0009 /* Jupiter boards with */ +#define PCI_DEVICE_EPCJ 0x000a /* PLX 9060 chip for PCI */ + + +/* + * On the PCI boards, there is no IO space allocated + * The I/O registers will be in the first 3 bytes of the + * upper 2MB of the 4MB memory space. The board memory + * will be mapped into the low 2MB of the 4MB memory space + */ + +/* Potential location of PCI Bios from E0000 to FFFFF*/ +#define PCI_BIOS_SIZE 0x00020000 + +/* Size of Memory and I/O for PCI (4MB) */ +#define PCI_RAM_SIZE 0x00400000 + +/* Size of Memory (2MB) */ +#define PCI_MEM_SIZE 0x00200000 + +/* Offset of I/0 in Memory (2MB) */ +#define PCI_IO_OFFSET 0x00200000 + +#define MEMOUTB(basemem, pnum, setmemval) *(caddr_t)((basemem) + ( PCI_IO_OFFSET | pnum << 4 | pnum )) = (setmemval) +#define MEMINB(basemem, pnum) *(caddr_t)((basemem) + (PCI_IO_OFFSET | pnum << 4 | pnum )) /* for PCI I/O */ + + + + + -- cgit v1.2.2 From b71dc8873427bb5bf0ce31b968c3f219a1d6d014 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 3 Mar 2011 18:38:22 +0100 Subject: tty: move cd1865.h to drivers/staging/tty/ The file is required by the specialix driver, which was moved to drivers/staging/. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/char/cd1865.h | 263 ------------------------------------------- drivers/staging/tty/cd1865.h | 263 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 263 insertions(+), 263 deletions(-) delete mode 100644 drivers/char/cd1865.h create mode 100644 drivers/staging/tty/cd1865.h diff --git a/drivers/char/cd1865.h b/drivers/char/cd1865.h deleted file mode 100644 index 9940966e7a1d..000000000000 --- a/drivers/char/cd1865.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * linux/drivers/char/cd1865.h -- Definitions relating to the CD1865 - * for the Specialix IO8+ multiport serial driver. - * - * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) - * - * Specialix pays for the development and support of this driver. - * Please DO contact io8-linux@specialix.co.uk if you require - * support. - * - * This driver was developped in the BitWizard linux device - * driver service. If you require a linux device driver for your - * product, please contact devices@BitWizard.nl for a quote. - * - */ - -/* - * Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards. - */ - - -/* Values of choice for Interrupt ACKs */ -/* These values are "obligatory" if you use the register based - * interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865 - * databook */ -#define SX_ACK_MINT 0x75 /* goes to PILR1 */ -#define SX_ACK_TINT 0x76 /* goes to PILR2 */ -#define SX_ACK_RINT 0x77 /* goes to PILR3 */ - -/* Chip ID (is used when chips ar daisy chained.) */ -#define SX_ID 0x10 - -/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */ - -#define CD186x_NCH 8 /* Total number of channels */ -#define CD186x_TPC 16 /* Ticks per character */ -#define CD186x_NFIFO 8 /* TX FIFO size */ - - -/* Global registers */ - -#define CD186x_GIVR 0x40 /* Global Interrupt Vector Register */ -#define CD186x_GICR 0x41 /* Global Interrupting Channel Register */ -#define CD186x_PILR1 0x61 /* Priority Interrupt Level Register 1 */ -#define CD186x_PILR2 0x62 /* Priority Interrupt Level Register 2 */ -#define CD186x_PILR3 0x63 /* Priority Interrupt Level Register 3 */ -#define CD186x_CAR 0x64 /* Channel Access Register */ -#define CD186x_SRSR 0x65 /* Channel Access Register */ -#define CD186x_GFRCR 0x6b /* Global Firmware Revision Code Register */ -#define CD186x_PPRH 0x70 /* Prescaler Period Register High */ -#define CD186x_PPRL 0x71 /* Prescaler Period Register Low */ -#define CD186x_RDR 0x78 /* Receiver Data Register */ -#define CD186x_RCSR 0x7a /* Receiver Character Status Register */ -#define CD186x_TDR 0x7b /* Transmit Data Register */ -#define CD186x_EOIR 0x7f /* End of Interrupt Register */ -#define CD186x_MRAR 0x75 /* Modem Request Acknowledge register */ -#define CD186x_TRAR 0x76 /* Transmit Request Acknowledge register */ -#define CD186x_RRAR 0x77 /* Receive Request Acknowledge register */ -#define CD186x_SRCR 0x66 /* Service Request Configuration register */ - -/* Channel Registers */ - -#define CD186x_CCR 0x01 /* Channel Command Register */ -#define CD186x_IER 0x02 /* Interrupt Enable Register */ -#define CD186x_COR1 0x03 /* Channel Option Register 1 */ -#define CD186x_COR2 0x04 /* Channel Option Register 2 */ -#define CD186x_COR3 0x05 /* Channel Option Register 3 */ -#define CD186x_CCSR 0x06 /* Channel Control Status Register */ -#define CD186x_RDCR 0x07 /* Receive Data Count Register */ -#define CD186x_SCHR1 0x09 /* Special Character Register 1 */ -#define CD186x_SCHR2 0x0a /* Special Character Register 2 */ -#define CD186x_SCHR3 0x0b /* Special Character Register 3 */ -#define CD186x_SCHR4 0x0c /* Special Character Register 4 */ -#define CD186x_MCOR1 0x10 /* Modem Change Option 1 Register */ -#define CD186x_MCOR2 0x11 /* Modem Change Option 2 Register */ -#define CD186x_MCR 0x12 /* Modem Change Register */ -#define CD186x_RTPR 0x18 /* Receive Timeout Period Register */ -#define CD186x_MSVR 0x28 /* Modem Signal Value Register */ -#define CD186x_MSVRTS 0x29 /* Modem Signal Value Register */ -#define CD186x_MSVDTR 0x2a /* Modem Signal Value Register */ -#define CD186x_RBPRH 0x31 /* Receive Baud Rate Period Register High */ -#define CD186x_RBPRL 0x32 /* Receive Baud Rate Period Register Low */ -#define CD186x_TBPRH 0x39 /* Transmit Baud Rate Period Register High */ -#define CD186x_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */ - - -/* Global Interrupt Vector Register (R/W) */ - -#define GIVR_ITMASK 0x07 /* Interrupt type mask */ -#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */ -#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */ -#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */ -#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */ - - -/* Global Interrupt Channel Register (R/W) */ - -#define GICR_CHAN 0x1c /* Channel Number Mask */ -#define GICR_CHAN_OFF 2 /* Channel Number shift */ - - -/* Channel Address Register (R/W) */ - -#define CAR_CHAN 0x07 /* Channel Number Mask */ -#define CAR_A7 0x08 /* A7 Address Extension (unused) */ - - -/* Receive Character Status Register (R/O) */ - -#define RCSR_TOUT 0x80 /* Rx Timeout */ -#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ -#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ -#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ -#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ -#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ -#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ -#define RCSR_BREAK 0x08 /* Break has been detected */ -#define RCSR_PE 0x04 /* Parity Error */ -#define RCSR_FE 0x02 /* Frame Error */ -#define RCSR_OE 0x01 /* Overrun Error */ - - -/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ - -#define CCR_HARDRESET 0x81 /* Reset the chip */ - -#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ - -#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ -#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ -#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ - -#define CCR_SSCH1 0x21 /* Send Special Character 1 */ - -#define CCR_SSCH2 0x22 /* Send Special Character 2 */ - -#define CCR_SSCH3 0x23 /* Send Special Character 3 */ - -#define CCR_SSCH4 0x24 /* Send Special Character 4 */ - -#define CCR_TXEN 0x18 /* Enable Transmitter */ -#define CCR_RXEN 0x12 /* Enable Receiver */ - -#define CCR_TXDIS 0x14 /* Disable Transmitter */ -#define CCR_RXDIS 0x11 /* Disable Receiver */ - - -/* Interrupt Enable Register (R/W) */ - -#define IER_DSR 0x80 /* Enable interrupt on DSR change */ -#define IER_CD 0x40 /* Enable interrupt on CD change */ -#define IER_CTS 0x20 /* Enable interrupt on CTS change */ -#define IER_RXD 0x10 /* Enable interrupt on Receive Data */ -#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ -#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ -#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ -#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ - - -/* Channel Option Register 1 (R/W) */ - -#define COR1_ODDP 0x80 /* Odd Parity */ -#define COR1_PARMODE 0x60 /* Parity Mode mask */ -#define COR1_NOPAR 0x00 /* No Parity */ -#define COR1_FORCEPAR 0x20 /* Force Parity */ -#define COR1_NORMPAR 0x40 /* Normal Parity */ -#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ -#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ -#define COR1_1SB 0x00 /* 1 Stop Bit */ -#define COR1_15SB 0x04 /* 1.5 Stop Bits */ -#define COR1_2SB 0x08 /* 2 Stop Bits */ -#define COR1_CHARLEN 0x03 /* Character Length */ -#define COR1_5BITS 0x00 /* 5 bits */ -#define COR1_6BITS 0x01 /* 6 bits */ -#define COR1_7BITS 0x02 /* 7 bits */ -#define COR1_8BITS 0x03 /* 8 bits */ - - -/* Channel Option Register 2 (R/W) */ - -#define COR2_IXM 0x80 /* Implied XON mode */ -#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ -#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ -#define COR2_LLM 0x10 /* Local Loopback Mode */ -#define COR2_RLM 0x08 /* Remote Loopback Mode */ -#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ -#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ -#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ - - -/* Channel Option Register 3 (R/W) */ - -#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ -#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ -#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ -#define COR3_SCDE 0x10 /* Special Character Detection Enable */ -#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ - - -/* Channel Control Status Register (R/O) */ - -#define CCSR_RXEN 0x80 /* Receiver Enabled */ -#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ -#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ -#define CCSR_TXEN 0x08 /* Transmitter Enabled */ -#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ -#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ - - -/* Modem Change Option Register 1 (R/W) */ - -#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ -#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ -#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ -#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ -#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ - - -/* Modem Change Option Register 2 (R/W) */ - -#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ -#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ -#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ - -/* Modem Change Register (R/W) */ - -#define MCR_DSRCHG 0x80 /* DSR Changed */ -#define MCR_CDCHG 0x40 /* CD Changed */ -#define MCR_CTSCHG 0x20 /* CTS Changed */ - - -/* Modem Signal Value Register (R/W) */ - -#define MSVR_DSR 0x80 /* Current state of DSR input */ -#define MSVR_CD 0x40 /* Current state of CD input */ -#define MSVR_CTS 0x20 /* Current state of CTS input */ -#define MSVR_DTR 0x02 /* Current state of DTR output */ -#define MSVR_RTS 0x01 /* Current state of RTS output */ - - -/* Escape characters */ - -#define CD186x_C_ESC 0x00 /* Escape character */ -#define CD186x_C_SBRK 0x81 /* Start sending BREAK */ -#define CD186x_C_DELAY 0x82 /* Delay output */ -#define CD186x_C_EBRK 0x83 /* Stop sending BREAK */ - -#define SRSR_RREQint 0x10 /* This chip wants "rec" serviced */ -#define SRSR_TREQint 0x04 /* This chip wants "transmit" serviced */ -#define SRSR_MREQint 0x01 /* This chip wants "mdm change" serviced */ - - - -#define SRCR_PKGTYPE 0x80 -#define SRCR_REGACKEN 0x40 -#define SRCR_DAISYEN 0x20 -#define SRCR_GLOBPRI 0x10 -#define SRCR_UNFAIR 0x08 -#define SRCR_AUTOPRI 0x02 -#define SRCR_PRISEL 0x01 - - diff --git a/drivers/staging/tty/cd1865.h b/drivers/staging/tty/cd1865.h new file mode 100644 index 000000000000..9940966e7a1d --- /dev/null +++ b/drivers/staging/tty/cd1865.h @@ -0,0 +1,263 @@ +/* + * linux/drivers/char/cd1865.h -- Definitions relating to the CD1865 + * for the Specialix IO8+ multiport serial driver. + * + * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) + * + * Specialix pays for the development and support of this driver. + * Please DO contact io8-linux@specialix.co.uk if you require + * support. + * + * This driver was developped in the BitWizard linux device + * driver service. If you require a linux device driver for your + * product, please contact devices@BitWizard.nl for a quote. + * + */ + +/* + * Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards. + */ + + +/* Values of choice for Interrupt ACKs */ +/* These values are "obligatory" if you use the register based + * interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865 + * databook */ +#define SX_ACK_MINT 0x75 /* goes to PILR1 */ +#define SX_ACK_TINT 0x76 /* goes to PILR2 */ +#define SX_ACK_RINT 0x77 /* goes to PILR3 */ + +/* Chip ID (is used when chips ar daisy chained.) */ +#define SX_ID 0x10 + +/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */ + +#define CD186x_NCH 8 /* Total number of channels */ +#define CD186x_TPC 16 /* Ticks per character */ +#define CD186x_NFIFO 8 /* TX FIFO size */ + + +/* Global registers */ + +#define CD186x_GIVR 0x40 /* Global Interrupt Vector Register */ +#define CD186x_GICR 0x41 /* Global Interrupting Channel Register */ +#define CD186x_PILR1 0x61 /* Priority Interrupt Level Register 1 */ +#define CD186x_PILR2 0x62 /* Priority Interrupt Level Register 2 */ +#define CD186x_PILR3 0x63 /* Priority Interrupt Level Register 3 */ +#define CD186x_CAR 0x64 /* Channel Access Register */ +#define CD186x_SRSR 0x65 /* Channel Access Register */ +#define CD186x_GFRCR 0x6b /* Global Firmware Revision Code Register */ +#define CD186x_PPRH 0x70 /* Prescaler Period Register High */ +#define CD186x_PPRL 0x71 /* Prescaler Period Register Low */ +#define CD186x_RDR 0x78 /* Receiver Data Register */ +#define CD186x_RCSR 0x7a /* Receiver Character Status Register */ +#define CD186x_TDR 0x7b /* Transmit Data Register */ +#define CD186x_EOIR 0x7f /* End of Interrupt Register */ +#define CD186x_MRAR 0x75 /* Modem Request Acknowledge register */ +#define CD186x_TRAR 0x76 /* Transmit Request Acknowledge register */ +#define CD186x_RRAR 0x77 /* Receive Request Acknowledge register */ +#define CD186x_SRCR 0x66 /* Service Request Configuration register */ + +/* Channel Registers */ + +#define CD186x_CCR 0x01 /* Channel Command Register */ +#define CD186x_IER 0x02 /* Interrupt Enable Register */ +#define CD186x_COR1 0x03 /* Channel Option Register 1 */ +#define CD186x_COR2 0x04 /* Channel Option Register 2 */ +#define CD186x_COR3 0x05 /* Channel Option Register 3 */ +#define CD186x_CCSR 0x06 /* Channel Control Status Register */ +#define CD186x_RDCR 0x07 /* Receive Data Count Register */ +#define CD186x_SCHR1 0x09 /* Special Character Register 1 */ +#define CD186x_SCHR2 0x0a /* Special Character Register 2 */ +#define CD186x_SCHR3 0x0b /* Special Character Register 3 */ +#define CD186x_SCHR4 0x0c /* Special Character Register 4 */ +#define CD186x_MCOR1 0x10 /* Modem Change Option 1 Register */ +#define CD186x_MCOR2 0x11 /* Modem Change Option 2 Register */ +#define CD186x_MCR 0x12 /* Modem Change Register */ +#define CD186x_RTPR 0x18 /* Receive Timeout Period Register */ +#define CD186x_MSVR 0x28 /* Modem Signal Value Register */ +#define CD186x_MSVRTS 0x29 /* Modem Signal Value Register */ +#define CD186x_MSVDTR 0x2a /* Modem Signal Value Register */ +#define CD186x_RBPRH 0x31 /* Receive Baud Rate Period Register High */ +#define CD186x_RBPRL 0x32 /* Receive Baud Rate Period Register Low */ +#define CD186x_TBPRH 0x39 /* Transmit Baud Rate Period Register High */ +#define CD186x_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */ + + +/* Global Interrupt Vector Register (R/W) */ + +#define GIVR_ITMASK 0x07 /* Interrupt type mask */ +#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */ +#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */ +#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */ +#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */ + + +/* Global Interrupt Channel Register (R/W) */ + +#define GICR_CHAN 0x1c /* Channel Number Mask */ +#define GICR_CHAN_OFF 2 /* Channel Number shift */ + + +/* Channel Address Register (R/W) */ + +#define CAR_CHAN 0x07 /* Channel Number Mask */ +#define CAR_A7 0x08 /* A7 Address Extension (unused) */ + + +/* Receive Character Status Register (R/O) */ + +#define RCSR_TOUT 0x80 /* Rx Timeout */ +#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ +#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ +#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ +#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ +#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ +#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ +#define RCSR_BREAK 0x08 /* Break has been detected */ +#define RCSR_PE 0x04 /* Parity Error */ +#define RCSR_FE 0x02 /* Frame Error */ +#define RCSR_OE 0x01 /* Overrun Error */ + + +/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ + +#define CCR_HARDRESET 0x81 /* Reset the chip */ + +#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ + +#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ +#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ +#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ + +#define CCR_SSCH1 0x21 /* Send Special Character 1 */ + +#define CCR_SSCH2 0x22 /* Send Special Character 2 */ + +#define CCR_SSCH3 0x23 /* Send Special Character 3 */ + +#define CCR_SSCH4 0x24 /* Send Special Character 4 */ + +#define CCR_TXEN 0x18 /* Enable Transmitter */ +#define CCR_RXEN 0x12 /* Enable Receiver */ + +#define CCR_TXDIS 0x14 /* Disable Transmitter */ +#define CCR_RXDIS 0x11 /* Disable Receiver */ + + +/* Interrupt Enable Register (R/W) */ + +#define IER_DSR 0x80 /* Enable interrupt on DSR change */ +#define IER_CD 0x40 /* Enable interrupt on CD change */ +#define IER_CTS 0x20 /* Enable interrupt on CTS change */ +#define IER_RXD 0x10 /* Enable interrupt on Receive Data */ +#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ +#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ +#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ +#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ + + +/* Channel Option Register 1 (R/W) */ + +#define COR1_ODDP 0x80 /* Odd Parity */ +#define COR1_PARMODE 0x60 /* Parity Mode mask */ +#define COR1_NOPAR 0x00 /* No Parity */ +#define COR1_FORCEPAR 0x20 /* Force Parity */ +#define COR1_NORMPAR 0x40 /* Normal Parity */ +#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ +#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ +#define COR1_1SB 0x00 /* 1 Stop Bit */ +#define COR1_15SB 0x04 /* 1.5 Stop Bits */ +#define COR1_2SB 0x08 /* 2 Stop Bits */ +#define COR1_CHARLEN 0x03 /* Character Length */ +#define COR1_5BITS 0x00 /* 5 bits */ +#define COR1_6BITS 0x01 /* 6 bits */ +#define COR1_7BITS 0x02 /* 7 bits */ +#define COR1_8BITS 0x03 /* 8 bits */ + + +/* Channel Option Register 2 (R/W) */ + +#define COR2_IXM 0x80 /* Implied XON mode */ +#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ +#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ +#define COR2_LLM 0x10 /* Local Loopback Mode */ +#define COR2_RLM 0x08 /* Remote Loopback Mode */ +#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ +#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ +#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ + + +/* Channel Option Register 3 (R/W) */ + +#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ +#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ +#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ +#define COR3_SCDE 0x10 /* Special Character Detection Enable */ +#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ + + +/* Channel Control Status Register (R/O) */ + +#define CCSR_RXEN 0x80 /* Receiver Enabled */ +#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ +#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ +#define CCSR_TXEN 0x08 /* Transmitter Enabled */ +#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ +#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ + + +/* Modem Change Option Register 1 (R/W) */ + +#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ +#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ +#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ +#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ +#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ + + +/* Modem Change Option Register 2 (R/W) */ + +#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ +#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ +#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ + +/* Modem Change Register (R/W) */ + +#define MCR_DSRCHG 0x80 /* DSR Changed */ +#define MCR_CDCHG 0x40 /* CD Changed */ +#define MCR_CTSCHG 0x20 /* CTS Changed */ + + +/* Modem Signal Value Register (R/W) */ + +#define MSVR_DSR 0x80 /* Current state of DSR input */ +#define MSVR_CD 0x40 /* Current state of CD input */ +#define MSVR_CTS 0x20 /* Current state of CTS input */ +#define MSVR_DTR 0x02 /* Current state of DTR output */ +#define MSVR_RTS 0x01 /* Current state of RTS output */ + + +/* Escape characters */ + +#define CD186x_C_ESC 0x00 /* Escape character */ +#define CD186x_C_SBRK 0x81 /* Start sending BREAK */ +#define CD186x_C_DELAY 0x82 /* Delay output */ +#define CD186x_C_EBRK 0x83 /* Stop sending BREAK */ + +#define SRSR_RREQint 0x10 /* This chip wants "rec" serviced */ +#define SRSR_TREQint 0x04 /* This chip wants "transmit" serviced */ +#define SRSR_MREQint 0x01 /* This chip wants "mdm change" serviced */ + + + +#define SRCR_PKGTYPE 0x80 +#define SRCR_REGACKEN 0x40 +#define SRCR_DAISYEN 0x20 +#define SRCR_GLOBPRI 0x10 +#define SRCR_UNFAIR 0x08 +#define SRCR_AUTOPRI 0x02 +#define SRCR_PRISEL 0x01 + + -- cgit v1.2.2 From 00bff392c81e4fb1901e5160fdd5afdb2546a6ab Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 3 Mar 2011 18:08:24 +0800 Subject: tty_audit: fix tty_audit_add_data live lock on audit disabled The current tty_audit_add_data code: do { size_t run; run = N_TTY_BUF_SIZE - buf->valid; if (run > size) run = size; memcpy(buf->data + buf->valid, data, run); buf->valid += run; data += run; size -= run; if (buf->valid == N_TTY_BUF_SIZE) tty_audit_buf_push_current(buf); } while (size != 0); If the current buffer is full, kernel will then call tty_audit_buf_push_current to empty the buffer. But if we disabled audit at the same time, tty_audit_buf_push() returns immediately if audit_enabled is zero. Without emptying the buffer. With obvious effect on tty_audit_add_data() that ends up spinning in that loop, copying 0 bytes at each iteration and attempting to push each time without any effect. Holding the lock all along. Suggested-by: Alexander Viro Signed-off-by: Xiaotian Feng Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_audit.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c index f64582b0f623..7c5866920622 100644 --- a/drivers/tty/tty_audit.c +++ b/drivers/tty/tty_audit.c @@ -95,8 +95,10 @@ static void tty_audit_buf_push(struct task_struct *tsk, uid_t loginuid, { if (buf->valid == 0) return; - if (audit_enabled == 0) + if (audit_enabled == 0) { + buf->valid = 0; return; + } tty_audit_log("tty", tsk, loginuid, sessionid, buf->major, buf->minor, buf->data, buf->valid); buf->valid = 0; -- cgit v1.2.2 From 550462378515a82279e07f12e2c105f617f112f8 Mon Sep 17 00:00:00 2001 From: Mayank Rana Date: Mon, 7 Mar 2011 10:28:42 +0530 Subject: serial: msm_serial_hs: Add MSM high speed UART driver This driver supports UART-DM HW on MSM platforms. It uses the on chip DMA to drive data transfers and has optional support for UART power management independent of Linux suspend/resume and wakeup from Rx. The driver was originally developed by Google. It is functionally equivalent to the version available at: http://android.git.kernel.org/?p=kernel/experimental.git the differences being: 1) Remove wakelocks and change unsupported DMA API. 2) Replace clock selection register codes by macros. 3) Fix checkpatch errors and add inline documentation. 4) Add runtime PM hooks for active power state transitions. 5) Handle error path and cleanup resources if required. CC: Nick Pelly Signed-off-by: Sankalp Bose Signed-off-by: Mayank Rana Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 12 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/msm_serial_hs.c | 1880 +++++++++++++++++++++++++++ include/linux/platform_data/msm_serial_hs.h | 49 + 4 files changed, 1942 insertions(+) create mode 100644 drivers/tty/serial/msm_serial_hs.c create mode 100644 include/linux/platform_data/msm_serial_hs.h diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 90d939a4ee5d..d9ccbf825095 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1319,6 +1319,18 @@ config SERIAL_MSM_CONSOLE depends on SERIAL_MSM=y select SERIAL_CORE_CONSOLE +config SERIAL_MSM_HS + tristate "MSM UART High Speed: Serial Driver" + depends on ARCH_MSM + select SERIAL_CORE + help + If you have a machine based on MSM family of SoCs, you + can enable its onboard high speed serial port by enabling + this option. + + Choose M here to compile it as a module. The module will be + called msm_serial_hs. + config SERIAL_VT8500 bool "VIA VT8500 on-chip serial port support" depends on ARM && ARCH_VT8500 diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 0c6aefb55acf..d94dc005c8a6 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o +obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c new file mode 100644 index 000000000000..2e7fc9cee9cc --- /dev/null +++ b/drivers/tty/serial/msm_serial_hs.c @@ -0,0 +1,1880 @@ +/* + * MSM 7k/8k High speed uart driver + * + * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008 Google Inc. + * Modified: Nick Pelly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * Has optional support for uart power management independent of linux + * suspend/resume: + * + * RX wakeup. + * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the + * UART RX pin). This should only be used if there is not a wakeup + * GPIO on the UART CTS, and the first RX byte is known (for example, with the + * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will + * always be lost. RTS will be asserted even while the UART is off in this mode + * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq. + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +/* HSUART Registers */ +#define UARTDM_MR1_ADDR 0x0 +#define UARTDM_MR2_ADDR 0x4 + +/* Data Mover result codes */ +#define RSLT_FIFO_CNTR_BMSK (0xE << 28) +#define RSLT_VLD BIT(1) + +/* write only register */ +#define UARTDM_CSR_ADDR 0x8 +#define UARTDM_CSR_115200 0xFF +#define UARTDM_CSR_57600 0xEE +#define UARTDM_CSR_38400 0xDD +#define UARTDM_CSR_28800 0xCC +#define UARTDM_CSR_19200 0xBB +#define UARTDM_CSR_14400 0xAA +#define UARTDM_CSR_9600 0x99 +#define UARTDM_CSR_7200 0x88 +#define UARTDM_CSR_4800 0x77 +#define UARTDM_CSR_3600 0x66 +#define UARTDM_CSR_2400 0x55 +#define UARTDM_CSR_1200 0x44 +#define UARTDM_CSR_600 0x33 +#define UARTDM_CSR_300 0x22 +#define UARTDM_CSR_150 0x11 +#define UARTDM_CSR_75 0x00 + +/* write only register */ +#define UARTDM_TF_ADDR 0x70 +#define UARTDM_TF2_ADDR 0x74 +#define UARTDM_TF3_ADDR 0x78 +#define UARTDM_TF4_ADDR 0x7C + +/* write only register */ +#define UARTDM_CR_ADDR 0x10 +#define UARTDM_IMR_ADDR 0x14 + +#define UARTDM_IPR_ADDR 0x18 +#define UARTDM_TFWR_ADDR 0x1c +#define UARTDM_RFWR_ADDR 0x20 +#define UARTDM_HCR_ADDR 0x24 +#define UARTDM_DMRX_ADDR 0x34 +#define UARTDM_IRDA_ADDR 0x38 +#define UARTDM_DMEN_ADDR 0x3c + +/* UART_DM_NO_CHARS_FOR_TX */ +#define UARTDM_NCF_TX_ADDR 0x40 + +#define UARTDM_BADR_ADDR 0x44 + +#define UARTDM_SIM_CFG_ADDR 0x80 +/* Read Only register */ +#define UARTDM_SR_ADDR 0x8 + +/* Read Only register */ +#define UARTDM_RF_ADDR 0x70 +#define UARTDM_RF2_ADDR 0x74 +#define UARTDM_RF3_ADDR 0x78 +#define UARTDM_RF4_ADDR 0x7C + +/* Read Only register */ +#define UARTDM_MISR_ADDR 0x10 + +/* Read Only register */ +#define UARTDM_ISR_ADDR 0x14 +#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38 + +#define UARTDM_RXFS_ADDR 0x50 + +/* Register field Mask Mapping */ +#define UARTDM_SR_PAR_FRAME_BMSK BIT(5) +#define UARTDM_SR_OVERRUN_BMSK BIT(4) +#define UARTDM_SR_TXEMT_BMSK BIT(3) +#define UARTDM_SR_TXRDY_BMSK BIT(2) +#define UARTDM_SR_RXRDY_BMSK BIT(0) + +#define UARTDM_CR_TX_DISABLE_BMSK BIT(3) +#define UARTDM_CR_RX_DISABLE_BMSK BIT(1) +#define UARTDM_CR_TX_EN_BMSK BIT(2) +#define UARTDM_CR_RX_EN_BMSK BIT(0) + +/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */ +#define RESET_RX 0x10 +#define RESET_TX 0x20 +#define RESET_ERROR_STATUS 0x30 +#define RESET_BREAK_INT 0x40 +#define START_BREAK 0x50 +#define STOP_BREAK 0x60 +#define RESET_CTS 0x70 +#define RESET_STALE_INT 0x80 +#define RFR_LOW 0xD0 +#define RFR_HIGH 0xE0 +#define CR_PROTECTION_EN 0x100 +#define STALE_EVENT_ENABLE 0x500 +#define STALE_EVENT_DISABLE 0x600 +#define FORCE_STALE_EVENT 0x400 +#define CLEAR_TX_READY 0x300 +#define RESET_TX_ERROR 0x800 +#define RESET_TX_DONE 0x810 + +#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00 +#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f +#define UARTDM_MR1_CTS_CTL_BMSK 0x40 +#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80 + +#define UARTDM_MR2_ERROR_MODE_BMSK 0x40 +#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30 + +/* bits per character configuration */ +#define FIVE_BPC (0 << 4) +#define SIX_BPC (1 << 4) +#define SEVEN_BPC (2 << 4) +#define EIGHT_BPC (3 << 4) + +#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc +#define STOP_BIT_ONE (1 << 2) +#define STOP_BIT_TWO (3 << 2) + +#define UARTDM_MR2_PARITY_MODE_BMSK 0x3 + +/* Parity configuration */ +#define NO_PARITY 0x0 +#define EVEN_PARITY 0x1 +#define ODD_PARITY 0x2 +#define SPACE_PARITY 0x3 + +#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80 +#define UARTDM_IPR_STALE_LSB_BMSK 0x1f + +/* These can be used for both ISR and IMR register */ +#define UARTDM_ISR_TX_READY_BMSK BIT(7) +#define UARTDM_ISR_CURRENT_CTS_BMSK BIT(6) +#define UARTDM_ISR_DELTA_CTS_BMSK BIT(5) +#define UARTDM_ISR_RXLEV_BMSK BIT(4) +#define UARTDM_ISR_RXSTALE_BMSK BIT(3) +#define UARTDM_ISR_RXBREAK_BMSK BIT(2) +#define UARTDM_ISR_RXHUNT_BMSK BIT(1) +#define UARTDM_ISR_TXLEV_BMSK BIT(0) + +/* Field definitions for UART_DM_DMEN*/ +#define UARTDM_TX_DM_EN_BMSK 0x1 +#define UARTDM_RX_DM_EN_BMSK 0x2 + +#define UART_FIFOSIZE 64 +#define UARTCLK 7372800 + +/* Rx DMA request states */ +enum flush_reason { + FLUSH_NONE, + FLUSH_DATA_READY, + FLUSH_DATA_INVALID, /* values after this indicate invalid data */ + FLUSH_IGNORE = FLUSH_DATA_INVALID, + FLUSH_STOP, + FLUSH_SHUTDOWN, +}; + +/* UART clock states */ +enum msm_hs_clk_states_e { + MSM_HS_CLK_PORT_OFF, /* port not in use */ + MSM_HS_CLK_OFF, /* clock disabled */ + MSM_HS_CLK_REQUEST_OFF, /* disable after TX and RX flushed */ + MSM_HS_CLK_ON, /* clock enabled */ +}; + +/* Track the forced RXSTALE flush during clock off sequence. + * These states are only valid during MSM_HS_CLK_REQUEST_OFF */ +enum msm_hs_clk_req_off_state_e { + CLK_REQ_OFF_START, + CLK_REQ_OFF_RXSTALE_ISSUED, + CLK_REQ_OFF_FLUSH_ISSUED, + CLK_REQ_OFF_RXSTALE_FLUSHED, +}; + +/** + * struct msm_hs_tx + * @tx_ready_int_en: ok to dma more tx? + * @dma_in_flight: tx dma in progress + * @xfer: top level DMA command pointer structure + * @command_ptr: third level command struct pointer + * @command_ptr_ptr: second level command list struct pointer + * @mapped_cmd_ptr: DMA view of third level command struct + * @mapped_cmd_ptr_ptr: DMA view of second level command list struct + * @tx_count: number of bytes to transfer in DMA transfer + * @dma_base: DMA view of UART xmit buffer + * + * This structure describes a single Tx DMA transaction. MSM DMA + * commands have two levels of indirection. The top level command + * ptr points to a list of command ptr which in turn points to a + * single DMA 'command'. In our case each Tx transaction consists + * of a single second level pointer pointing to a 'box type' command. + */ +struct msm_hs_tx { + unsigned int tx_ready_int_en; + unsigned int dma_in_flight; + struct msm_dmov_cmd xfer; + dmov_box *command_ptr; + u32 *command_ptr_ptr; + dma_addr_t mapped_cmd_ptr; + dma_addr_t mapped_cmd_ptr_ptr; + int tx_count; + dma_addr_t dma_base; +}; + +/** + * struct msm_hs_rx + * @flush: Rx DMA request state + * @xfer: top level DMA command pointer structure + * @cmdptr_dmaaddr: DMA view of second level command structure + * @command_ptr: third level DMA command pointer structure + * @command_ptr_ptr: second level DMA command list pointer + * @mapped_cmd_ptr: DMA view of the third level command structure + * @wait: wait for DMA completion before shutdown + * @buffer: destination buffer for RX DMA + * @rbuffer: DMA view of buffer + * @pool: dma pool out of which coherent rx buffer is allocated + * @tty_work: private work-queue for tty flip buffer push task + * + * This structure describes a single Rx DMA transaction. Rx DMA + * transactions use box mode DMA commands. + */ +struct msm_hs_rx { + enum flush_reason flush; + struct msm_dmov_cmd xfer; + dma_addr_t cmdptr_dmaaddr; + dmov_box *command_ptr; + u32 *command_ptr_ptr; + dma_addr_t mapped_cmd_ptr; + wait_queue_head_t wait; + dma_addr_t rbuffer; + unsigned char *buffer; + struct dma_pool *pool; + struct work_struct tty_work; +}; + +/** + * struct msm_hs_rx_wakeup + * @irq: IRQ line to be configured as interrupt source on Rx activity + * @ignore: boolean value. 1 = ignore the wakeup interrupt + * @rx_to_inject: extra character to be inserted to Rx tty on wakeup + * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character + * + * This is an optional structure required for UART Rx GPIO IRQ based + * wakeup from low power state. UART wakeup can be triggered by RX activity + * (using a wakeup GPIO on the UART RX pin). This should only be used if + * there is not a wakeup GPIO on the UART CTS, and the first RX byte is + * known (eg., with the Bluetooth Texas Instruments HCILL protocol), + * since the first RX byte will always be lost. RTS will be asserted even + * while the UART is clocked off in this mode of operation. + */ +struct msm_hs_rx_wakeup { + int irq; /* < 0 indicates low power wakeup disabled */ + unsigned char ignore; + unsigned char inject_rx; + char rx_to_inject; +}; + +/** + * struct msm_hs_port + * @uport: embedded uart port structure + * @imr_reg: shadow value of UARTDM_IMR + * @clk: uart input clock handle + * @tx: Tx transaction related data structure + * @rx: Rx transaction related data structure + * @dma_tx_channel: Tx DMA command channel + * @dma_rx_channel Rx DMA command channel + * @dma_tx_crci: Tx channel rate control interface number + * @dma_rx_crci: Rx channel rate control interface number + * @clk_off_timer: Timer to poll DMA event completion before clock off + * @clk_off_delay: clk_off_timer poll interval + * @clk_state: overall clock state + * @clk_req_off_state: post flush clock states + * @rx_wakeup: optional rx_wakeup feature related data + * @exit_lpm_cb: optional callback to exit low power mode + * + * Low level serial port structure. + */ +struct msm_hs_port { + struct uart_port uport; + unsigned long imr_reg; + struct clk *clk; + struct msm_hs_tx tx; + struct msm_hs_rx rx; + + int dma_tx_channel; + int dma_rx_channel; + int dma_tx_crci; + int dma_rx_crci; + + struct hrtimer clk_off_timer; + ktime_t clk_off_delay; + enum msm_hs_clk_states_e clk_state; + enum msm_hs_clk_req_off_state_e clk_req_off_state; + + struct msm_hs_rx_wakeup rx_wakeup; + void (*exit_lpm_cb)(struct uart_port *); +}; + +#define MSM_UARTDM_BURST_SIZE 16 /* DM burst size (in bytes) */ +#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE +#define UARTDM_RX_BUF_SIZE 512 + +#define UARTDM_NR 2 + +static struct msm_hs_port q_uart_port[UARTDM_NR]; +static struct platform_driver msm_serial_hs_platform_driver; +static struct uart_driver msm_hs_driver; +static struct uart_ops msm_hs_ops; +static struct workqueue_struct *msm_hs_workqueue; + +#define UARTDM_TO_MSM(uart_port) \ + container_of((uart_port), struct msm_hs_port, uport) + +static unsigned int use_low_power_rx_wakeup(struct msm_hs_port + *msm_uport) +{ + return (msm_uport->rx_wakeup.irq >= 0); +} + +static unsigned int msm_hs_read(struct uart_port *uport, + unsigned int offset) +{ + return ioread32(uport->membase + offset); +} + +static void msm_hs_write(struct uart_port *uport, unsigned int offset, + unsigned int value) +{ + iowrite32(value, uport->membase + offset); +} + +static void msm_hs_release_port(struct uart_port *port) +{ + iounmap(port->membase); +} + +static int msm_hs_request_port(struct uart_port *port) +{ + port->membase = ioremap(port->mapbase, PAGE_SIZE); + if (unlikely(!port->membase)) + return -ENOMEM; + + /* configure the CR Protection to Enable */ + msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN); + return 0; +} + +static int __devexit msm_hs_remove(struct platform_device *pdev) +{ + + struct msm_hs_port *msm_uport; + struct device *dev; + + if (pdev->id < 0 || pdev->id >= UARTDM_NR) { + printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); + return -EINVAL; + } + + msm_uport = &q_uart_port[pdev->id]; + dev = msm_uport->uport.dev; + + dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box), + DMA_TO_DEVICE); + dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer, + msm_uport->rx.rbuffer); + dma_pool_destroy(msm_uport->rx.pool); + + dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *), + DMA_TO_DEVICE); + dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *), + DMA_TO_DEVICE); + dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box), + DMA_TO_DEVICE); + + uart_remove_one_port(&msm_hs_driver, &msm_uport->uport); + clk_put(msm_uport->clk); + + /* Free the tx resources */ + kfree(msm_uport->tx.command_ptr); + kfree(msm_uport->tx.command_ptr_ptr); + + /* Free the rx resources */ + kfree(msm_uport->rx.command_ptr); + kfree(msm_uport->rx.command_ptr_ptr); + + iounmap(msm_uport->uport.membase); + + return 0; +} + +static int msm_hs_init_clk_locked(struct uart_port *uport) +{ + int ret; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + ret = clk_enable(msm_uport->clk); + if (ret) { + printk(KERN_ERR "Error could not turn on UART clk\n"); + return ret; + } + + /* Set up the MREG/NREG/DREG/MNDREG */ + ret = clk_set_rate(msm_uport->clk, uport->uartclk); + if (ret) { + printk(KERN_WARNING "Error setting clock rate on UART\n"); + clk_disable(msm_uport->clk); + return ret; + } + + msm_uport->clk_state = MSM_HS_CLK_ON; + return 0; +} + +/* Enable and Disable clocks (Used for power management) */ +static void msm_hs_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + if (use_low_power_rx_wakeup(msm_uport) || + msm_uport->exit_lpm_cb) + return; /* ignore linux PM states, + use msm_hs_request_clock API */ + + switch (state) { + case 0: + clk_enable(msm_uport->clk); + break; + case 3: + clk_disable(msm_uport->clk); + break; + default: + dev_err(uport->dev, "msm_serial: Unknown PM state %d\n", + state); + } +} + +/* + * programs the UARTDM_CSR register with correct bit rates + * + * Interrupts should be disabled before we are called, as + * we modify Set Baud rate + * Set receive stale interrupt level, dependant on Bit Rate + * Goal is to have around 8 ms before indicate stale. + * roundup (((Bit Rate * .008) / 10) + 1 + */ +static void msm_hs_set_bps_locked(struct uart_port *uport, + unsigned int bps) +{ + unsigned long rxstale; + unsigned long data; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + switch (bps) { + case 300: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75); + rxstale = 1; + break; + case 600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150); + rxstale = 1; + break; + case 1200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300); + rxstale = 1; + break; + case 2400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600); + rxstale = 1; + break; + case 4800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200); + rxstale = 1; + break; + case 9600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400); + rxstale = 2; + break; + case 14400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600); + rxstale = 3; + break; + case 19200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800); + rxstale = 4; + break; + case 28800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200); + rxstale = 6; + break; + case 38400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600); + rxstale = 8; + break; + case 57600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400); + rxstale = 16; + break; + case 76800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200); + rxstale = 16; + break; + case 115200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800); + rxstale = 31; + break; + case 230400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600); + rxstale = 31; + break; + case 460800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200); + rxstale = 31; + break; + case 4000000: + case 3686400: + case 3200000: + case 3500000: + case 3000000: + case 2500000: + case 1500000: + case 1152000: + case 1000000: + case 921600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200); + rxstale = 31; + break; + default: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400); + /* default to 9600 */ + bps = 9600; + rxstale = 2; + break; + } + if (bps > 460800) + uport->uartclk = bps * 16; + else + uport->uartclk = UARTCLK; + + if (clk_set_rate(msm_uport->clk, uport->uartclk)) { + printk(KERN_WARNING "Error setting clock rate on UART\n"); + return; + } + + data = rxstale & UARTDM_IPR_STALE_LSB_BMSK; + data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2); + + msm_hs_write(uport, UARTDM_IPR_ADDR, data); +} + +/* + * termios : new ktermios + * oldtermios: old ktermios previous setting + * + * Configure the serial port + */ +static void msm_hs_set_termios(struct uart_port *uport, + struct ktermios *termios, + struct ktermios *oldtermios) +{ + unsigned int bps; + unsigned long data; + unsigned long flags; + unsigned int c_cflag = termios->c_cflag; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* 300 is the minimum baud support by the driver */ + bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000); + + /* Temporary remapping 200 BAUD to 3.2 mbps */ + if (bps == 200) + bps = 3200000; + + msm_hs_set_bps_locked(uport, bps); + + data = msm_hs_read(uport, UARTDM_MR2_ADDR); + data &= ~UARTDM_MR2_PARITY_MODE_BMSK; + /* set parity */ + if (PARENB == (c_cflag & PARENB)) { + if (PARODD == (c_cflag & PARODD)) + data |= ODD_PARITY; + else if (CMSPAR == (c_cflag & CMSPAR)) + data |= SPACE_PARITY; + else + data |= EVEN_PARITY; + } + + /* Set bits per char */ + data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK; + + switch (c_cflag & CSIZE) { + case CS5: + data |= FIVE_BPC; + break; + case CS6: + data |= SIX_BPC; + break; + case CS7: + data |= SEVEN_BPC; + break; + default: + data |= EIGHT_BPC; + break; + } + /* stop bits */ + if (c_cflag & CSTOPB) { + data |= STOP_BIT_TWO; + } else { + /* otherwise 1 stop bit */ + data |= STOP_BIT_ONE; + } + data |= UARTDM_MR2_ERROR_MODE_BMSK; + /* write parity/bits per char/stop bit configuration */ + msm_hs_write(uport, UARTDM_MR2_ADDR, data); + + /* Configure HW flow control */ + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + + data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK); + + if (c_cflag & CRTSCTS) { + data |= UARTDM_MR1_CTS_CTL_BMSK; + data |= UARTDM_MR1_RX_RDY_CTL_BMSK; + } + + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + + uport->ignore_status_mask = termios->c_iflag & INPCK; + uport->ignore_status_mask |= termios->c_iflag & IGNPAR; + uport->read_status_mask = (termios->c_cflag & CREAD); + + msm_hs_write(uport, UARTDM_IMR_ADDR, 0); + + /* Set Transmit software time out */ + uart_update_timeout(uport, c_cflag, bps); + + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX); + + if (msm_uport->rx.flush == FLUSH_NONE) { + msm_uport->rx.flush = FLUSH_IGNORE; + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + } + + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&uport->lock, flags); +} + +/* + * Standard API, Transmitter + * Any character in the transmit shift register is sent + */ +static unsigned int msm_hs_tx_empty(struct uart_port *uport) +{ + unsigned int data; + unsigned int ret = 0; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + data = msm_hs_read(uport, UARTDM_SR_ADDR); + if (data & UARTDM_SR_TXEMT_BMSK) + ret = TIOCSER_TEMT; + + clk_disable(msm_uport->clk); + + return ret; +} + +/* + * Standard API, Stop transmitter. + * Any character in the transmit shift register is sent as + * well as the current data mover transfer . + */ +static void msm_hs_stop_tx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + msm_uport->tx.tx_ready_int_en = 0; +} + +/* + * Standard API, Stop receiver as soon as possible. + * + * Function immediately terminates the operation of the + * channel receiver and any incoming characters are lost. None + * of the receiver status bits are affected by this command and + * characters that are already in the receive FIFO there. + */ +static void msm_hs_stop_rx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + unsigned int data; + + clk_enable(msm_uport->clk); + + /* disable dlink */ + data = msm_hs_read(uport, UARTDM_DMEN_ADDR); + data &= ~UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + + /* Disable the receiver */ + if (msm_uport->rx.flush == FLUSH_NONE) + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + + if (msm_uport->rx.flush != FLUSH_SHUTDOWN) + msm_uport->rx.flush = FLUSH_STOP; + + clk_disable(msm_uport->clk); +} + +/* Transmit the next chunk of data */ +static void msm_hs_submit_tx_locked(struct uart_port *uport) +{ + int left; + int tx_count; + dma_addr_t src_addr; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct msm_hs_tx *tx = &msm_uport->tx; + struct circ_buf *tx_buf = &msm_uport->uport.state->xmit; + + if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) { + msm_hs_stop_tx_locked(uport); + return; + } + + tx->dma_in_flight = 1; + + tx_count = uart_circ_chars_pending(tx_buf); + + if (UARTDM_TX_BUF_SIZE < tx_count) + tx_count = UARTDM_TX_BUF_SIZE; + + left = UART_XMIT_SIZE - tx_buf->tail; + + if (tx_count > left) + tx_count = left; + + src_addr = tx->dma_base + tx_buf->tail; + dma_sync_single_for_device(uport->dev, src_addr, tx_count, + DMA_TO_DEVICE); + + tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) | + ((tx_count + 15) >> 4); + tx->command_ptr->src_row_addr = src_addr; + + dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + + *tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr); + + dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + + /* Save tx_count to use in Callback */ + tx->tx_count = tx_count; + msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count); + + /* Disable the tx_ready interrupt */ + msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer); +} + +/* Start to receive the next chunk of data */ +static void msm_hs_start_rx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE); + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE); + msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + msm_uport->rx.flush = FLUSH_NONE; + msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer); + + /* might have finished RX and be ready to clock off */ + hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay, + HRTIMER_MODE_REL); +} + +/* Enable the transmitter Interrupt */ +static void msm_hs_start_tx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + if (msm_uport->exit_lpm_cb) + msm_uport->exit_lpm_cb(uport); + + if (msm_uport->tx.tx_ready_int_en == 0) { + msm_uport->tx.tx_ready_int_en = 1; + msm_hs_submit_tx_locked(uport); + } + + clk_disable(msm_uport->clk); +} + +/* + * This routine is called when we are done with a DMA transfer + * + * This routine is registered with Data mover when we set + * up a Data Mover transfer. It is called from Data mover ISR + * when the DMA transfer is done. + */ +static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr, + unsigned int result, + struct msm_dmov_errdata *err) +{ + unsigned long flags; + struct msm_hs_port *msm_uport; + + /* DMA did not finish properly */ + WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) && + !(result & RSLT_VLD)); + + msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer); + + spin_lock_irqsave(&msm_uport->uport.lock, flags); + clk_enable(msm_uport->clk); + + msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK; + msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&msm_uport->uport.lock, flags); +} + +/* + * This routine is called when we are done with a DMA transfer or the + * a flush has been sent to the data mover driver. + * + * This routine is registered with Data mover when we set up a Data Mover + * transfer. It is called from Data mover ISR when the DMA transfer is done. + */ +static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr, + unsigned int result, + struct msm_dmov_errdata *err) +{ + int retval; + int rx_count; + unsigned long status; + unsigned int error_f = 0; + unsigned long flags; + unsigned int flush; + struct tty_struct *tty; + struct uart_port *uport; + struct msm_hs_port *msm_uport; + + msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer); + uport = &msm_uport->uport; + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + tty = uport->state->port.tty; + + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); + + status = msm_hs_read(uport, UARTDM_SR_ADDR); + + /* overflow is not connect to data in a FIFO */ + if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) && + (uport->read_status_mask & CREAD))) { + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + uport->icount.buf_overrun++; + error_f = 1; + } + + if (!(uport->ignore_status_mask & INPCK)) + status = status & ~(UARTDM_SR_PAR_FRAME_BMSK); + + if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) { + /* Can not tell difference between parity & frame error */ + uport->icount.parity++; + error_f = 1; + if (uport->ignore_status_mask & IGNPAR) + tty_insert_flip_char(tty, 0, TTY_PARITY); + } + + if (error_f) + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS); + + if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED) + msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED; + + flush = msm_uport->rx.flush; + if (flush == FLUSH_IGNORE) + msm_hs_start_rx_locked(uport); + if (flush == FLUSH_STOP) + msm_uport->rx.flush = FLUSH_SHUTDOWN; + if (flush >= FLUSH_DATA_INVALID) + goto out; + + rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR); + + if (0 != (uport->read_status_mask & CREAD)) { + retval = tty_insert_flip_string(tty, msm_uport->rx.buffer, + rx_count); + BUG_ON(retval != rx_count); + } + + msm_hs_start_rx_locked(uport); + +out: + clk_disable(msm_uport->clk); + + spin_unlock_irqrestore(&uport->lock, flags); + + if (flush < FLUSH_DATA_INVALID) + queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); +} + +static void msm_hs_tty_flip_buffer_work(struct work_struct *work) +{ + struct msm_hs_port *msm_uport = + container_of(work, struct msm_hs_port, rx.tty_work); + struct tty_struct *tty = msm_uport->uport.state->port.tty; + + tty_flip_buffer_push(tty); +} + +/* + * Standard API, Current states of modem control inputs + * + * Since CTS can be handled entirely by HARDWARE we always + * indicate clear to send and count on the TX FIFO to block when + * it fills up. + * + * - TIOCM_DCD + * - TIOCM_CTS + * - TIOCM_DSR + * - TIOCM_RI + * (Unsupported) DCD and DSR will return them high. RI will return low. + */ +static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; +} + +/* + * True enables UART auto RFR, which indicates we are ready for data if the RX + * buffer is not full. False disables auto RFR, and deasserts RFR to indicate + * we are not ready for data. Must be called with UART clock on. + */ +static void set_rfr_locked(struct uart_port *uport, int auto_rfr) +{ + unsigned int data; + + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + + if (auto_rfr) { + /* enable auto ready-for-receiving */ + data |= UARTDM_MR1_RX_RDY_CTL_BMSK; + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + } else { + /* disable auto ready-for-receiving */ + data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK; + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + /* RFR is active low, set high */ + msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH); + } +} + +/* + * Standard API, used to set or clear RFR + */ +static void msm_hs_set_mctrl_locked(struct uart_port *uport, + unsigned int mctrl) +{ + unsigned int auto_rfr; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + auto_rfr = TIOCM_RTS & mctrl ? 1 : 0; + set_rfr_locked(uport, auto_rfr); + + clk_disable(msm_uport->clk); +} + +/* Standard API, Enable modem status (CTS) interrupt */ +static void msm_hs_enable_ms_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + /* Enable DELTA_CTS Interrupt */ + msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + +} + +/* + * Standard API, Break Signal + * + * Control the transmission of a break signal. ctl eq 0 => break + * signal terminate ctl ne 0 => start break signal + */ +static void msm_hs_break_ctl(struct uart_port *uport, int ctl) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK); + clk_disable(msm_uport->clk); +} + +static void msm_hs_config_port(struct uart_port *uport, int cfg_flags) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + if (cfg_flags & UART_CONFIG_TYPE) { + uport->type = PORT_MSM; + msm_hs_request_port(uport); + } + spin_unlock_irqrestore(&uport->lock, flags); +} + +/* Handle CTS changes (Called from interrupt handler) */ +static void msm_hs_handle_delta_cts(struct uart_port *uport) +{ + unsigned long flags; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* clear interrupt */ + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS); + uport->icount.cts++; + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&uport->lock, flags); + + /* clear the IOCTL TIOCMIWAIT if called */ + wake_up_interruptible(&uport->state->port.delta_msr_wait); +} + +/* check if the TX path is flushed, and if so clock off + * returns 0 did not clock off, need to retry (still sending final byte) + * -1 did not clock off, do not retry + * 1 if we clocked off + */ +static int msm_hs_check_clock_off_locked(struct uart_port *uport) +{ + unsigned long sr_status; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct circ_buf *tx_buf = &uport->state->xmit; + + /* Cancel if tx tty buffer is not empty, dma is in flight, + * or tx fifo is not empty, or rx fifo is not empty */ + if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF || + !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight || + (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) || + !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK)) { + return -1; + } + + /* Make sure the uart is finished with the last byte */ + sr_status = msm_hs_read(uport, UARTDM_SR_ADDR); + if (!(sr_status & UARTDM_SR_TXEMT_BMSK)) + return 0; /* retry */ + + /* Make sure forced RXSTALE flush complete */ + switch (msm_uport->clk_req_off_state) { + case CLK_REQ_OFF_START: + msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED; + msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT); + return 0; /* RXSTALE flush not complete - retry */ + case CLK_REQ_OFF_RXSTALE_ISSUED: + case CLK_REQ_OFF_FLUSH_ISSUED: + return 0; /* RXSTALE flush not complete - retry */ + case CLK_REQ_OFF_RXSTALE_FLUSHED: + break; /* continue */ + } + + if (msm_uport->rx.flush != FLUSH_SHUTDOWN) { + if (msm_uport->rx.flush == FLUSH_NONE) + msm_hs_stop_rx_locked(uport); + return 0; /* come back later to really clock off */ + } + + /* we really want to clock off */ + clk_disable(msm_uport->clk); + msm_uport->clk_state = MSM_HS_CLK_OFF; + + if (use_low_power_rx_wakeup(msm_uport)) { + msm_uport->rx_wakeup.ignore = 1; + enable_irq(msm_uport->rx_wakeup.irq); + } + return 1; +} + +static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer) +{ + unsigned long flags; + int ret = HRTIMER_NORESTART; + struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port, + clk_off_timer); + struct uart_port *uport = &msm_uport->uport; + + spin_lock_irqsave(&uport->lock, flags); + + if (!msm_hs_check_clock_off_locked(uport)) { + hrtimer_forward_now(timer, msm_uport->clk_off_delay); + ret = HRTIMER_RESTART; + } + + spin_unlock_irqrestore(&uport->lock, flags); + + return ret; +} + +static irqreturn_t msm_hs_isr(int irq, void *dev) +{ + unsigned long flags; + unsigned long isr_status; + struct msm_hs_port *msm_uport = dev; + struct uart_port *uport = &msm_uport->uport; + struct circ_buf *tx_buf = &uport->state->xmit; + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + spin_lock_irqsave(&uport->lock, flags); + + isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR); + + /* Uart RX starting */ + if (isr_status & UARTDM_ISR_RXLEV_BMSK) { + msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + } + /* Stale rx interrupt */ + if (isr_status & UARTDM_ISR_RXSTALE_BMSK) { + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + + if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED) + msm_uport->clk_req_off_state = + CLK_REQ_OFF_FLUSH_ISSUED; + if (rx->flush == FLUSH_NONE) { + rx->flush = FLUSH_DATA_READY; + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + } + } + /* tx ready interrupt */ + if (isr_status & UARTDM_ISR_TX_READY_BMSK) { + /* Clear TX Ready */ + msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY); + + if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) { + msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, + msm_uport->imr_reg); + } + + /* Complete DMA TX transactions and submit new transactions */ + tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE; + + tx->dma_in_flight = 0; + + uport->icount.tx += tx->tx_count; + if (tx->tx_ready_int_en) + msm_hs_submit_tx_locked(uport); + + if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS) + uart_write_wakeup(uport); + } + if (isr_status & UARTDM_ISR_TXLEV_BMSK) { + /* TX FIFO is empty */ + msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + if (!msm_hs_check_clock_off_locked(uport)) + hrtimer_start(&msm_uport->clk_off_timer, + msm_uport->clk_off_delay, + HRTIMER_MODE_REL); + } + + /* Change in CTS interrupt */ + if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK) + msm_hs_handle_delta_cts(uport); + + spin_unlock_irqrestore(&uport->lock, flags); + + return IRQ_HANDLED; +} + +void msm_hs_request_clock_off_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + if (msm_uport->clk_state == MSM_HS_CLK_ON) { + msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF; + msm_uport->clk_req_off_state = CLK_REQ_OFF_START; + if (!use_low_power_rx_wakeup(msm_uport)) + set_rfr_locked(uport, 0); + msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + } +} + +/** + * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart + * clock once pending TX is flushed and Rx DMA command is terminated. + * @uport: uart_port structure for the device instance. + * + * This functions puts the device into a partially active low power mode. It + * waits to complete all pending tx transactions, flushes ongoing Rx DMA + * command and terminates UART side Rx transaction, puts UART HW in non DMA + * mode and then clocks off the device. A client calls this when no UART + * data is expected. msm_request_clock_on() must be called before any further + * UART can be sent or received. + */ +void msm_hs_request_clock_off(struct uart_port *uport) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + msm_hs_request_clock_off_locked(uport); + spin_unlock_irqrestore(&uport->lock, flags); +} + +void msm_hs_request_clock_on_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + unsigned int data; + + switch (msm_uport->clk_state) { + case MSM_HS_CLK_OFF: + clk_enable(msm_uport->clk); + disable_irq_nosync(msm_uport->rx_wakeup.irq); + /* fall-through */ + case MSM_HS_CLK_REQUEST_OFF: + if (msm_uport->rx.flush == FLUSH_STOP || + msm_uport->rx.flush == FLUSH_SHUTDOWN) { + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + data = msm_hs_read(uport, UARTDM_DMEN_ADDR); + data |= UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + } + hrtimer_try_to_cancel(&msm_uport->clk_off_timer); + if (msm_uport->rx.flush == FLUSH_SHUTDOWN) + msm_hs_start_rx_locked(uport); + if (!use_low_power_rx_wakeup(msm_uport)) + set_rfr_locked(uport, 1); + if (msm_uport->rx.flush == FLUSH_STOP) + msm_uport->rx.flush = FLUSH_IGNORE; + msm_uport->clk_state = MSM_HS_CLK_ON; + break; + case MSM_HS_CLK_ON: + break; + case MSM_HS_CLK_PORT_OFF: + break; + } +} + +/** + * msm_hs_request_clock_on - Switch the device from partially active low + * power mode to fully active (i.e. clock on) mode. + * @uport: uart_port structure for the device. + * + * This function switches on the input clock, puts UART HW into DMA mode + * and enqueues an Rx DMA command if the device was in partially active + * mode. It has no effect if called with the device in inactive state. + */ +void msm_hs_request_clock_on(struct uart_port *uport) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + msm_hs_request_clock_on_locked(uport); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev) +{ + unsigned int wakeup = 0; + unsigned long flags; + struct msm_hs_port *msm_uport = dev; + struct uart_port *uport = &msm_uport->uport; + struct tty_struct *tty = NULL; + + spin_lock_irqsave(&uport->lock, flags); + if (msm_uport->clk_state == MSM_HS_CLK_OFF) { + /* ignore the first irq - it is a pending irq that occured + * before enable_irq() */ + if (msm_uport->rx_wakeup.ignore) + msm_uport->rx_wakeup.ignore = 0; + else + wakeup = 1; + } + + if (wakeup) { + /* the uart was clocked off during an rx, wake up and + * optionally inject char into tty rx */ + msm_hs_request_clock_on_locked(uport); + if (msm_uport->rx_wakeup.inject_rx) { + tty = uport->state->port.tty; + tty_insert_flip_char(tty, + msm_uport->rx_wakeup.rx_to_inject, + TTY_NORMAL); + queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); + } + } + + spin_unlock_irqrestore(&uport->lock, flags); + + return IRQ_HANDLED; +} + +static const char *msm_hs_type(struct uart_port *port) +{ + return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL; +} + +/* Called when port is opened */ +static int msm_hs_startup(struct uart_port *uport) +{ + int ret; + int rfr_level; + unsigned long flags; + unsigned int data; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct circ_buf *tx_buf = &uport->state->xmit; + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + rfr_level = uport->fifosize; + if (rfr_level > 16) + rfr_level -= 16; + + tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE, + DMA_TO_DEVICE); + + /* do not let tty layer execute RX in global workqueue, use a + * dedicated workqueue managed by this driver */ + uport->state->port.tty->low_latency = 1; + + /* turn on uart clk */ + ret = msm_hs_init_clk_locked(uport); + if (unlikely(ret)) { + printk(KERN_ERR "Turning uartclk failed!\n"); + goto err_msm_hs_init_clk; + } + + /* Set auto RFR Level */ + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK; + data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK; + data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2)); + data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level); + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + + /* Make sure RXSTALE count is non-zero */ + data = msm_hs_read(uport, UARTDM_IPR_ADDR); + if (!data) { + data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK; + msm_hs_write(uport, UARTDM_IPR_ADDR, data); + } + + /* Enable Data Mover Mode */ + data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + + /* Reset TX */ + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS); + msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW); + /* Turn on Uart Receiver */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK); + + /* Turn on Uart Transmitter */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK); + + /* Initialize the tx */ + tx->tx_ready_int_en = 0; + tx->dma_in_flight = 0; + + tx->xfer.complete_func = msm_hs_dmov_tx_callback; + tx->xfer.execute_func = NULL; + + tx->command_ptr->cmd = CMD_LC | + CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX; + + tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16) + | (MSM_UARTDM_BURST_SIZE); + + tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16); + + tx->command_ptr->dst_row_addr = + msm_uport->uport.mapbase + UARTDM_TF_ADDR; + + + /* Turn on Uart Receive */ + rx->xfer.complete_func = msm_hs_dmov_rx_callback; + rx->xfer.execute_func = NULL; + + rx->command_ptr->cmd = CMD_LC | + CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX; + + rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16) + | (MSM_UARTDM_BURST_SIZE); + rx->command_ptr->row_offset = MSM_UARTDM_BURST_SIZE; + rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR; + + + msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK; + /* Enable reading the current CTS, no harm even if CTS is ignored */ + msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK; + + msm_hs_write(uport, UARTDM_TFWR_ADDR, 0); /* TXLEV on empty TX fifo */ + + + ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH, + "msm_hs_uart", msm_uport); + if (unlikely(ret)) { + printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n"); + goto err_request_irq; + } + if (use_low_power_rx_wakeup(msm_uport)) { + ret = request_irq(msm_uport->rx_wakeup.irq, + msm_hs_rx_wakeup_isr, + IRQF_TRIGGER_FALLING, + "msm_hs_rx_wakeup", msm_uport); + if (unlikely(ret)) { + printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n"); + free_irq(uport->irq, msm_uport); + goto err_request_irq; + } + disable_irq(msm_uport->rx_wakeup.irq); + } + + spin_lock_irqsave(&uport->lock, flags); + + msm_hs_write(uport, UARTDM_RFWR_ADDR, 0); + msm_hs_start_rx_locked(uport); + + spin_unlock_irqrestore(&uport->lock, flags); + ret = pm_runtime_set_active(uport->dev); + if (ret) + dev_err(uport->dev, "set active error:%d\n", ret); + pm_runtime_enable(uport->dev); + + return 0; + +err_request_irq: +err_msm_hs_init_clk: + dma_unmap_single(uport->dev, tx->dma_base, + UART_XMIT_SIZE, DMA_TO_DEVICE); + return ret; +} + +/* Initialize tx and rx data structures */ +static int __devinit uartdm_init_port(struct uart_port *uport) +{ + int ret = 0; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + /* Allocate the command pointer. Needs to be 64 bit aligned */ + tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA); + if (!tx->command_ptr) + return -ENOMEM; + + tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA); + if (!tx->command_ptr_ptr) { + ret = -ENOMEM; + goto err_tx_command_ptr_ptr; + } + + tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev, + tx->command_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr); + + init_waitqueue_head(&rx->wait); + + rx->pool = dma_pool_create("rx_buffer_pool", uport->dev, + UARTDM_RX_BUF_SIZE, 16, 0); + if (!rx->pool) { + pr_err("%s(): cannot allocate rx_buffer_pool", __func__); + ret = -ENOMEM; + goto err_dma_pool_create; + } + + rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer); + if (!rx->buffer) { + pr_err("%s(): cannot allocate rx->buffer", __func__); + ret = -ENOMEM; + goto err_dma_pool_alloc; + } + + /* Allocate the command pointer. Needs to be 64 bit aligned */ + rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA); + if (!rx->command_ptr) { + pr_err("%s(): cannot allocate rx->command_ptr", __func__); + ret = -ENOMEM; + goto err_rx_command_ptr; + } + + rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA); + if (!rx->command_ptr_ptr) { + pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__); + ret = -ENOMEM; + goto err_rx_command_ptr_ptr; + } + + rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) | + (UARTDM_RX_BUF_SIZE >> 4); + + rx->command_ptr->dst_row_addr = rx->rbuffer; + + rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + + *rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr); + + rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr); + + INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work); + + return ret; + +err_rx_command_ptr_ptr: + kfree(rx->command_ptr); +err_rx_command_ptr: + dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer, + msm_uport->rx.rbuffer); +err_dma_pool_alloc: + dma_pool_destroy(msm_uport->rx.pool); +err_dma_pool_create: + dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + kfree(msm_uport->tx.command_ptr_ptr); +err_tx_command_ptr_ptr: + kfree(msm_uport->tx.command_ptr); + return ret; +} + +static int __devinit msm_hs_probe(struct platform_device *pdev) +{ + int ret; + struct uart_port *uport; + struct msm_hs_port *msm_uport; + struct resource *resource; + const struct msm_serial_hs_platform_data *pdata = + pdev->dev.platform_data; + + if (pdev->id < 0 || pdev->id >= UARTDM_NR) { + printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); + return -EINVAL; + } + + msm_uport = &q_uart_port[pdev->id]; + uport = &msm_uport->uport; + + uport->dev = &pdev->dev; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + + uport->mapbase = resource->start; + uport->irq = platform_get_irq(pdev, 0); + if (unlikely(uport->irq < 0)) + return -ENXIO; + + if (unlikely(set_irq_wake(uport->irq, 1))) + return -ENXIO; + + if (pdata == NULL || pdata->rx_wakeup_irq < 0) + msm_uport->rx_wakeup.irq = -1; + else { + msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq; + msm_uport->rx_wakeup.ignore = 1; + msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup; + msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject; + + if (unlikely(msm_uport->rx_wakeup.irq < 0)) + return -ENXIO; + + if (unlikely(set_irq_wake(msm_uport->rx_wakeup.irq, 1))) + return -ENXIO; + } + + if (pdata == NULL) + msm_uport->exit_lpm_cb = NULL; + else + msm_uport->exit_lpm_cb = pdata->exit_lpm_cb; + + resource = platform_get_resource_byname(pdev, IORESOURCE_DMA, + "uartdm_channels"); + if (unlikely(!resource)) + return -ENXIO; + + msm_uport->dma_tx_channel = resource->start; + msm_uport->dma_rx_channel = resource->end; + + resource = platform_get_resource_byname(pdev, IORESOURCE_DMA, + "uartdm_crci"); + if (unlikely(!resource)) + return -ENXIO; + + msm_uport->dma_tx_crci = resource->start; + msm_uport->dma_rx_crci = resource->end; + + uport->iotype = UPIO_MEM; + uport->fifosize = UART_FIFOSIZE; + uport->ops = &msm_hs_ops; + uport->flags = UPF_BOOT_AUTOCONF; + uport->uartclk = UARTCLK; + msm_uport->imr_reg = 0x0; + msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk"); + if (IS_ERR(msm_uport->clk)) + return PTR_ERR(msm_uport->clk); + + ret = uartdm_init_port(uport); + if (unlikely(ret)) + return ret; + + msm_uport->clk_state = MSM_HS_CLK_PORT_OFF; + hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + msm_uport->clk_off_timer.function = msm_hs_clk_off_retry; + msm_uport->clk_off_delay = ktime_set(0, 1000000); /* 1ms */ + + uport->line = pdev->id; + return uart_add_one_port(&msm_hs_driver, uport); +} + +static int __init msm_serial_hs_init(void) +{ + int ret, i; + + /* Init all UARTS as non-configured */ + for (i = 0; i < UARTDM_NR; i++) + q_uart_port[i].uport.type = PORT_UNKNOWN; + + msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs"); + if (unlikely(!msm_hs_workqueue)) + return -ENOMEM; + + ret = uart_register_driver(&msm_hs_driver); + if (unlikely(ret)) { + printk(KERN_ERR "%s failed to load\n", __func__); + goto err_uart_register_driver; + } + + ret = platform_driver_register(&msm_serial_hs_platform_driver); + if (ret) { + printk(KERN_ERR "%s failed to load\n", __func__); + goto err_platform_driver_register; + } + + return ret; + +err_platform_driver_register: + uart_unregister_driver(&msm_hs_driver); +err_uart_register_driver: + destroy_workqueue(msm_hs_workqueue); + return ret; +} +module_init(msm_serial_hs_init); + +/* + * Called by the upper layer when port is closed. + * - Disables the port + * - Unhook the ISR + */ +static void msm_hs_shutdown(struct uart_port *uport) +{ + unsigned long flags; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + BUG_ON(msm_uport->rx.flush < FLUSH_STOP); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* Disable the transmitter */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK); + /* Disable the receiver */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK); + + pm_runtime_disable(uport->dev); + pm_runtime_set_suspended(uport->dev); + + /* Free the interrupt */ + free_irq(uport->irq, msm_uport); + if (use_low_power_rx_wakeup(msm_uport)) + free_irq(msm_uport->rx_wakeup.irq, msm_uport); + + msm_uport->imr_reg = 0; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN); + + clk_disable(msm_uport->clk); /* to balance local clk_enable() */ + if (msm_uport->clk_state != MSM_HS_CLK_OFF) + clk_disable(msm_uport->clk); /* to balance clk_state */ + msm_uport->clk_state = MSM_HS_CLK_PORT_OFF; + + dma_unmap_single(uport->dev, msm_uport->tx.dma_base, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_unlock_irqrestore(&uport->lock, flags); + + if (cancel_work_sync(&msm_uport->rx.tty_work)) + msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work); +} + +static void __exit msm_serial_hs_exit(void) +{ + flush_workqueue(msm_hs_workqueue); + destroy_workqueue(msm_hs_workqueue); + platform_driver_unregister(&msm_serial_hs_platform_driver); + uart_unregister_driver(&msm_hs_driver); +} +module_exit(msm_serial_hs_exit); + +#ifdef CONFIG_PM_RUNTIME +static int msm_hs_runtime_idle(struct device *dev) +{ + /* + * returning success from idle results in runtime suspend to be + * called + */ + return 0; +} + +static int msm_hs_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct + platform_device, dev); + struct msm_hs_port *msm_uport = &q_uart_port[pdev->id]; + + msm_hs_request_clock_on(&msm_uport->uport); + return 0; +} + +static int msm_hs_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct + platform_device, dev); + struct msm_hs_port *msm_uport = &q_uart_port[pdev->id]; + + msm_hs_request_clock_off(&msm_uport->uport); + return 0; +} +#else +#define msm_hs_runtime_idle NULL +#define msm_hs_runtime_resume NULL +#define msm_hs_runtime_suspend NULL +#endif + +static const struct dev_pm_ops msm_hs_dev_pm_ops = { + .runtime_suspend = msm_hs_runtime_suspend, + .runtime_resume = msm_hs_runtime_resume, + .runtime_idle = msm_hs_runtime_idle, +}; + +static struct platform_driver msm_serial_hs_platform_driver = { + .probe = msm_hs_probe, + .remove = __devexit_p(msm_hs_remove), + .driver = { + .name = "msm_serial_hs", + .owner = THIS_MODULE, + .pm = &msm_hs_dev_pm_ops, + }, +}; + +static struct uart_driver msm_hs_driver = { + .owner = THIS_MODULE, + .driver_name = "msm_serial_hs", + .dev_name = "ttyHS", + .nr = UARTDM_NR, + .cons = 0, +}; + +static struct uart_ops msm_hs_ops = { + .tx_empty = msm_hs_tx_empty, + .set_mctrl = msm_hs_set_mctrl_locked, + .get_mctrl = msm_hs_get_mctrl_locked, + .stop_tx = msm_hs_stop_tx_locked, + .start_tx = msm_hs_start_tx_locked, + .stop_rx = msm_hs_stop_rx_locked, + .enable_ms = msm_hs_enable_ms_locked, + .break_ctl = msm_hs_break_ctl, + .startup = msm_hs_startup, + .shutdown = msm_hs_shutdown, + .set_termios = msm_hs_set_termios, + .pm = msm_hs_pm, + .type = msm_hs_type, + .config_port = msm_hs_config_port, + .release_port = msm_hs_release_port, + .request_port = msm_hs_request_port, +}; + +MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset"); +MODULE_VERSION("1.2"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/msm_serial_hs.h b/include/linux/platform_data/msm_serial_hs.h new file mode 100644 index 000000000000..98a2046f8b31 --- /dev/null +++ b/include/linux/platform_data/msm_serial_hs.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2008 Google, Inc. + * Author: Nick Pelly + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MSM_SERIAL_HS_H +#define __ASM_ARCH_MSM_SERIAL_HS_H + +#include + +/* API to request the uart clock off or on for low power management + * Clients should call request_clock_off() when no uart data is expected, + * and must call request_clock_on() before any further uart data can be + * received. */ +extern void msm_hs_request_clock_off(struct uart_port *uport); +extern void msm_hs_request_clock_on(struct uart_port *uport); + +/** + * struct msm_serial_hs_platform_data + * @rx_wakeup_irq: Rx activity irq + * @rx_to_inject: extra character to be inserted to Rx tty on wakeup + * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character + * @exit_lpm_cb: function called before every Tx transaction + * + * This is an optional structure required for UART Rx GPIO IRQ based + * wakeup from low power state. UART wakeup can be triggered by RX activity + * (using a wakeup GPIO on the UART RX pin). This should only be used if + * there is not a wakeup GPIO on the UART CTS, and the first RX byte is + * known (eg., with the Bluetooth Texas Instruments HCILL protocol), + * since the first RX byte will always be lost. RTS will be asserted even + * while the UART is clocked off in this mode of operation. + */ +struct msm_serial_hs_platform_data { + int rx_wakeup_irq; + unsigned char inject_rx_on_wakeup; + char rx_to_inject; + void (*exit_lpm_cb)(struct uart_port *); +}; + +#endif -- cgit v1.2.2 From 323e84122ec6447a5a18de42b0dc7114f77e76c4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eric=20B=C3=A9nard?= Date: Wed, 9 Mar 2011 19:24:48 +0100 Subject: n_gsm: add a documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * this documentation gives some details on how to get the n_gsm line discipline to work with modems supporting 07.10 basic option. * it was tested on Telit and Simcom modems. Signed-off-by: Eric Bénard Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- Documentation/serial/n_gsm.txt | 89 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) create mode 100644 Documentation/serial/n_gsm.txt diff --git a/Documentation/serial/n_gsm.txt b/Documentation/serial/n_gsm.txt new file mode 100644 index 000000000000..397f41a1f153 --- /dev/null +++ b/Documentation/serial/n_gsm.txt @@ -0,0 +1,89 @@ +n_gsm.c GSM 0710 tty multiplexor HOWTO +=================================================== + +This line discipline implements the GSM 07.10 multiplexing protocol +detailed in the following 3GPP document : +http://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip + +This document give some hints on how to use this driver with GPRS and 3G +modems connected to a physical serial port. + +How to use it +------------- +1- initialize the modem in 0710 mux mode (usually AT+CMUX= command) through +its serial port. Depending on the modem used, you can pass more or less +parameters to this command, +2- switch the serial line to using the n_gsm line discipline by using +TIOCSETD ioctl, +3- configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl, + +Major parts of the initialization program : +(a good starting point is util-linux-ng/sys-utils/ldattach.c) +#include +#define N_GSM0710 21 /* GSM 0710 Mux */ +#define DEFAULT_SPEED B115200 +#define SERIAL_PORT /dev/ttyS0 + + int ldisc = N_GSM0710; + struct gsm_config c; + struct termios configuration; + + /* open the serial port connected to the modem */ + fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY); + + /* configure the serial port : speed, flow control ... */ + + /* send the AT commands to switch the modem to CMUX mode + and check that it's succesful (should return OK) */ + write(fd, "AT+CMUX=0\r", 10); + + /* experience showed that some modems need some time before + being able to answer to the first MUX packet so a delay + may be needed here in some case */ + sleep(3); + + /* use n_gsm line discipline */ + ioctl(fd, TIOCSETD, &ldisc); + + /* get n_gsm configuration */ + ioctl(fd, GSMIOC_GETCONF, &c); + /* we are initiator and need encoding 0 (basic) */ + c.initiator = 1; + c.encapsulation = 0; + /* our modem defaults to a maximum size of 127 bytes */ + c.mru = 127; + c.mtu = 127; + /* set the new configuration */ + ioctl(fd, GSMIOC_SETCONF, &c); + + /* and wait for ever to keep the line discipline enabled */ + daemon(0,0); + pause(); + +4- create the devices corresponding to the "virtual" serial ports (take care, +each modem has its configuration and some DLC have dedicated functions, +for example GPS), starting with minor 1 (DLC0 is reserved for the management +of the mux) + +MAJOR=`cat /proc/devices |grep gsmtty | awk '{print $1}` +for i in `seq 1 4`; do + mknod /dev/ttygsm$i c $MAJOR $i +done + +5- use these devices as plain serial ports. +for example, it's possible : +- and to use gnokii to send / receive SMS on ttygsm1 +- to use ppp to establish a datalink on ttygsm2 + +6- first close all virtual ports before closing the physical port. + +Additional Documentation +------------------------ +More practical details on the protocol and how it's supported by industrial +modems can be found in the following documents : +http://www.telit.com/module/infopool/download.php?id=616 +http://www.u-blox.com/images/downloads/Product_Docs/LEON-G100-G200-MuxImplementation_ApplicationNote_%28GSM%20G1-CS-10002%29.pdf +http://www.sierrawireless.com/Support/Downloads/AirPrime/WMP_Series/~/media/Support_Downloads/AirPrime/Application_notes/CMUX_Feature_Application_Note-Rev004.ashx +http://wm.sim.com/sim/News/photo/2010721161442.pdf + +11-03-08 - Eric Bénard - -- cgit v1.2.2 From ed43b47b29bce303f86e1bff69b6f9924f5afcc4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eric=20B=C3=A9nard?= Date: Wed, 9 Mar 2011 19:24:49 +0100 Subject: n_gsm: fix UIH control byte : P bit should be 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * the GSM 07.10 specification says in 5.4.3.1 that 'both stations shall set the P bit to 0' thanks to Alan Cox for finding this explanation in the spec * without this fix, on Telit & Sim.com modems, opening a new DLC randomly fails. Not setting PF bit of the control byte gives a reliable behaviour on these modems. Signed-off-by: Eric Bénard Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 0d90be48463d..176f63256b37 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1250,8 +1250,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command, static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl) { - struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, - gsm->ftype|PF); + struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype); if (msg == NULL) return; msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */ -- cgit v1.2.2 From 1a738dcf6dac74a0ce10853a068d822f66f73268 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 22 Dec 2010 21:04:11 +0900 Subject: pch_phub: add new device ML7213 Add ML7213 device information. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 7 ++++- drivers/misc/pch_phub.c | 69 +++++++++++++++++++++++++++++++++---------------- 2 files changed, 53 insertions(+), 23 deletions(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index cc8e49db45fe..b7d5ef234ac9 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -441,7 +441,7 @@ config BMP085 module will be called bmp085. config PCH_PHUB - tristate "PCH Packet Hub of Intel Topcliff" + tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213" depends on PCI help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of @@ -449,6 +449,11 @@ config PCH_PHUB processor. The Topcliff has MAC address and Option ROM data in SROM. This driver can access MAC address and Option ROM data in SROM. + This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is + for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. + To compile this driver as a module, choose M here: the module will be called pch_phub. diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index 744b804aca15..98bffc471b17 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,7 +33,12 @@ #define PHUB_TIMEOUT 0x05 /* Time out value for Status Register */ #define PCH_PHUB_ROM_WRITE_ENABLE 0x01 /* Enabling for writing ROM */ #define PCH_PHUB_ROM_WRITE_DISABLE 0x00 /* Disabling for writing ROM */ -#define PCH_PHUB_ROM_START_ADDR 0x14 /* ROM data area start address offset */ +#define PCH_PHUB_MAC_START_ADDR 0x20C /* MAC data area start address offset */ +#define PCH_PHUB_ROM_START_ADDR_EG20T 0x14 /* ROM data area start address offset + (Intel EG20T PCH)*/ +#define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address + offset(OKI SEMICONDUCTOR ML7213) + */ /* MAX number of INT_REDUCE_CONTROL registers */ #define MAX_NUM_INT_REDUCE_CONTROL_REG 128 @@ -42,6 +47,10 @@ #define CLKCFG_CAN_50MHZ 0x12000000 #define CLKCFG_CANCLK_MASK 0xFF000000 +/* Macros for ML7213 */ +#define PCI_VENDOR_ID_ROHM 0x10db +#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A + /* SROM ACCESS Macro */ #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1)) @@ -298,7 +307,7 @@ static void pch_phub_read_serial_rom_val(struct pch_phub_reg *chip, { unsigned int mem_addr; - mem_addr = PCH_PHUB_ROM_START_ADDR + + mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T + pch_phub_mac_offset[offset_address]; pch_phub_read_serial_rom(chip, mem_addr, data); @@ -315,7 +324,7 @@ static int pch_phub_write_serial_rom_val(struct pch_phub_reg *chip, int retval; unsigned int mem_addr; - mem_addr = PCH_PHUB_ROM_START_ADDR + + mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T + pch_phub_mac_offset[offset_address]; retval = pch_phub_write_serial_rom(chip, mem_addr, data); @@ -594,23 +603,38 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, "pch_phub_extrom_base_address variable is %p\n", __func__, chip->pch_phub_extrom_base_address); - pci_set_drvdata(pdev, chip); - - retval = sysfs_create_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr); - if (retval) - goto err_sysfs_create; - - retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr); - if (retval) - goto exit_bin_attr; - - pch_phub_read_modify_write_reg(chip, (unsigned int)CLKCFG_REG_OFFSET, - CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK); + if (id->driver_data == 1) { + retval = sysfs_create_file(&pdev->dev.kobj, + &dev_attr_pch_mac.attr); + if (retval) + goto err_sysfs_create; - /* set the prefech value */ - iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14); - /* set the interrupt delay value */ - iowrite32(0x25, chip->pch_phub_base_address + 0x44); + retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr); + if (retval) + goto exit_bin_attr; + + pch_phub_read_modify_write_reg(chip, + (unsigned int)CLKCFG_REG_OFFSET, + CLKCFG_CAN_50MHZ, + CLKCFG_CANCLK_MASK); + + /* set the prefech value */ + iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14); + /* set the interrupt delay value */ + iowrite32(0x25, chip->pch_phub_base_address + 0x44); + } else if (id->driver_data == 2) { + retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr); + if (retval) + goto err_sysfs_create; + /* set the prefech value + * Device2(USB OHCI #1/ USB EHCI #1/ USB Device):a + * Device4(SDIO #0,1,2):f + * Device6(SATA 2):f + * Device8(USB OHCI #0/ USB EHCI #0):a + */ + iowrite32(0x000affa0, chip->pch_phub_base_address + 0x14); + } + pci_set_drvdata(pdev, chip); return 0; exit_bin_attr: @@ -687,8 +711,9 @@ static int pch_phub_resume(struct pci_dev *pdev) #endif /* CONFIG_PM */ static struct pci_device_id pch_phub_pcidev_id[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH1_PHUB)}, - {0,} + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH1_PHUB), 1, }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, }, + { } }; static struct pci_driver pch_phub_driver = { -- cgit v1.2.2 From 6ae705b23be8da52d3163be9d81e9b767876aaf9 Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 10 Mar 2011 15:14:00 +0200 Subject: pch_uart: reference clock on CM-iTC Default clock source for UARTs on Topcliff is external UART_CLK. On CM-iTC USB_48MHz is used instead. After VCO2PLL and DIV manipulations UARTs will receive 192 MHz. Clock manipulations on Topcliff are controlled in pch_phub.c v2: redone against the linux-next tree v3: redone against linux/kernel/git/next/linux-next.git snapshot Signed-off-by: Denis Turischev Signed-off-by: Greg Kroah-Hartman --- drivers/misc/pch_phub.c | 16 ++++++++++++++++ drivers/tty/serial/pch_uart.c | 9 +++++++-- 2 files changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index 98bffc471b17..5dd0b921bfc6 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -27,6 +27,7 @@ #include #include #include +#include #define PHUB_STATUS 0x00 /* Status Register offset */ #define PHUB_CONTROL 0x04 /* Control Register offset */ @@ -46,6 +47,13 @@ #define PCH_MINOR_NOS 1 #define CLKCFG_CAN_50MHZ 0x12000000 #define CLKCFG_CANCLK_MASK 0xFF000000 +#define CLKCFG_UART_MASK 0xFFFFFF + +/* CM-iTC */ +#define CLKCFG_UART_48MHZ (1 << 16) +#define CLKCFG_BAUDDIV (2 << 20) +#define CLKCFG_PLL2VCO (8 << 9) +#define CLKCFG_UARTCLKSEL (1 << 18) /* Macros for ML7213 */ #define PCI_VENDOR_ID_ROHM 0x10db @@ -618,6 +626,14 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK); + /* quirk for CM-iTC board */ + if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC")) + pch_phub_read_modify_write_reg(chip, + (unsigned int)CLKCFG_REG_OFFSET, + CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV | + CLKCFG_PLL2VCO | CLKCFG_UARTCLKSEL, + CLKCFG_UART_MASK); + /* set the prefech value */ iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14); /* set the interrupt delay value */ diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index a5ce9a5c018d..a9ad7f33526d 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -1404,14 +1405,18 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, if (!rxbuf) goto init_port_free_txbuf; + base_baud = 1843200; /* 1.8432MHz */ + + /* quirk for CM-iTC board */ + if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC")) + base_baud = 192000000; /* 192.0MHz */ + switch (port_type) { case PORT_UNKNOWN: fifosize = 256; /* EG20T/ML7213: UART0 */ - base_baud = 1843200; /* 1.8432MHz */ break; case PORT_8250: fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/ - base_baud = 1843200; /* 1.8432MHz */ break; default: dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); -- cgit v1.2.2