From d568df84f987a9321c1f5826a6c8678ef2bb2b70 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Jul 2006 01:47:00 -0400 Subject: ACPI: handle firmware_register init errors Signed-off-by: Randy Dunlap Signed-off-by: Len Brown --- drivers/acpi/bus.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index b2977695e120..7b77ee146a80 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -738,7 +739,10 @@ static int __init acpi_init(void) return -ENODEV; } - firmware_register(&acpi_subsys); + result = firmware_register(&acpi_subsys); + if (result < 0) + printk(KERN_WARNING "%s: firmware_register error: %d\n", + __FUNCTION__, result); result = acpi_bus_init(); -- cgit v1.2.2 From 9b6d97b64eff08b368375efcf9c1d01eba582ea2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Jul 2006 02:08:00 -0400 Subject: ACPI: scan: handle kset/kobject errors Check and handle kset_register() and kobject_register() init errors. Signed-off-by: Randy Dunlap Signed-off-by: Len Brown --- drivers/acpi/scan.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 5fcb50c7b778..698a1540e303 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -4,6 +4,7 @@ #include #include +#include #include #include @@ -113,6 +114,8 @@ static struct kset acpi_namespace_kset = { static void acpi_device_register(struct acpi_device *device, struct acpi_device *parent) { + int err; + /* * Linkage * ------- @@ -138,7 +141,10 @@ static void acpi_device_register(struct acpi_device *device, device->kobj.parent = &parent->kobj; device->kobj.ktype = &ktype_acpi_ns; device->kobj.kset = &acpi_namespace_kset; - kobject_register(&device->kobj); + err = kobject_register(&device->kobj); + if (err < 0) + printk(KERN_WARNING "%s: kobject_register error: %d\n", + __FUNCTION__, err); create_sysfs_device_files(device); } @@ -1450,7 +1456,9 @@ static int __init acpi_scan_init(void) if (acpi_disabled) return 0; - kset_register(&acpi_namespace_kset); + result = kset_register(&acpi_namespace_kset); + if (result < 0) + printk(KERN_ERR PREFIX "kset_register error: %d\n", result); result = bus_register(&acpi_bus_type); if (result) { -- cgit v1.2.2 From 9805cb76f7bcd3108e012270d9ef2fd8ea3bea55 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 25 Jul 2006 13:30:57 -0400 Subject: ACPI: restore some dmesg to DEBUG-only, ala 2.6.17 The ACPI_EXCEPTION() patch enabled a bunch of messages to print even in the non-DEBUG kernel. Need to change a couple back, and note that ACPI_EXCEPTION takes no \n, but ACPI_DEBUG_PRINT does. No context for object [%p]\n Device `[%s]' is not power manageable\n Signed-off-by: Len Brown --- drivers/acpi/bus.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 7b77ee146a80..279c4bac92e5 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -69,7 +69,8 @@ int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device) status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device); if (ACPI_FAILURE(status) || !*device) { - ACPI_EXCEPTION((AE_INFO, status, "No context for object [%p]", handle)); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n", + handle)); return -ENODEV; } @@ -193,7 +194,7 @@ int acpi_bus_set_power(acpi_handle handle, int state) /* Make sure this is a valid target state */ if (!device->flags.power_manageable) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable", + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n", device->kobj.name)); return -ENODEV; } -- cgit v1.2.2 From 16a74744231e57e354253567490ab9e4ccd2d605 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Apr 2006 08:47:00 -0400 Subject: PCI: quirk to disable e100 interrupt if RESET failed to Without this quirk, e100 can be pulling on a shared interrupt line when another device (eg. USB) loads, causing the interrupt to scream and get disabled. http://bugzilla.kernel.org/show_bug.cgi?id=5918 Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/pci/quirks.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e3c78c39b7e4..5ca1e94887be 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1511,6 +1511,63 @@ static void __devinit quirk_netmos(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); +static void __devinit quirk_e100_interrupt(struct pci_dev *dev) +{ + u16 command; + u32 bar; + u8 __iomem *csr; + u8 cmd_hi; + + switch (dev->device) { + /* PCI IDs taken from drivers/net/e100.c */ + case 0x1029: + case 0x1030 ... 0x1034: + case 0x1038 ... 0x103E: + case 0x1050 ... 0x1057: + case 0x1059: + case 0x1064 ... 0x106B: + case 0x1091 ... 0x1095: + case 0x1209: + case 0x1229: + case 0x2449: + case 0x2459: + case 0x245D: + case 0x27DC: + break; + default: + return; + } + + /* + * Some firmware hands off the e100 with interrupts enabled, + * which can cause a flood of interrupts if packets are + * received before the driver attaches to the device. So + * disable all e100 interrupts here. The driver will + * re-enable them when it's ready. + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar); + + if (!(command & PCI_COMMAND_MEMORY) || !bar) + return; + + csr = ioremap(bar, 8); + if (!csr) { + printk(KERN_WARNING "PCI: Can't map %s e100 registers\n", + pci_name(dev)); + return; + } + + cmd_hi = readb(csr + 3); + if (cmd_hi == 0) { + printk(KERN_WARNING "PCI: Firmware left %s e100 interrupts " + "enabled, disabling\n", pci_name(dev)); + writeb(1, csr + 3); + } + + iounmap(csr); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); static void __devinit fixup_rev1_53c810(struct pci_dev* dev) { -- cgit v1.2.2 From 5b9c9bf6c92274a6eb74fc8f86586ab592a7a1ec Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Wed, 26 Jul 2006 13:59:00 -0400 Subject: ACPI: add Dock Station driver to MAINTAINERS file Signed-off-by: Kristen Carlson Accardi Signed-off-by: Len Brown --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 645a9f85f33f..cf643071fbc6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -875,6 +875,12 @@ M: rdunlap@xenotime.net T: git http://tali.admingilde.org/git/linux-docbook.git S: Maintained +DOCKING STATION DRIVER +P: Kristen Carlson Accardi +M: kristen.c.accardi@intel.com +L: linux-acpi@vger.kernel.org +S: Maintained + DOUBLETALK DRIVER P: James R. Van Zandt M: jrv@vanzandt.mv.com -- cgit v1.2.2 From b2b3c121076961333977f485f0d54c22121df920 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Mon, 17 Jul 2006 07:22:45 -0600 Subject: [SCSI] sym2: claim only "Storage" class The follow patch fixes a problem for Matt Taggart. The Compaq system he had (dl380?) has a SmartArray device that exposes the 53c1510 device in both RAID and "normal" modes. The difference is in RAID mode, the smart array driver (IIRC) should claim the device instead of sym2 driver. Patch below prevents sym2 from claiming the device when the RAID "daughter board" is attached. Signed-off-by: Grant Grundler Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 8c505076c0eb..739d3ef46a40 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -2084,7 +2084,7 @@ static struct pci_device_id sym2_id_table[] __devinitdata = { { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8, 0xffff00, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895, -- cgit v1.2.2 From 8d4fbd3f978ba49498dc7c6430368c4ff86a09fc Mon Sep 17 00:00:00 2001 From: HighPoint Linux Team Date: Mon, 24 Jul 2006 15:48:54 +0800 Subject: [SCSI] hptiop: wrong register used in hptiop_reset_hba() IOP reset message should be posted to inbound message register instead of outbound message register. Signed-off-by: HighPoint Linux Team Signed-off-by: James Bottomley --- drivers/scsi/hptiop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index ab2f8b267908..74d4d22e5c05 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -577,7 +577,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) if (atomic_xchg(&hba->resetting, 1) == 0) { atomic_inc(&hba->reset_count); writel(IOPMU_INBOUND_MSG0_RESET, - &hba->iop->outbound_msgaddr0); + &hba->iop->inbound_msgaddr0); hptiop_pci_posting_flush(hba->iop); } -- cgit v1.2.2 From d82967c70658a408ea6cae5dc989ba8b2c0999e1 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:11 -0500 Subject: [SCSI] iscsi bugfixes: send correct error values to userspace In the xmit patch we are sending a -EXXX value to iscsi_conn_failure which is causing userspace to get confused. We should be sending a ISCSI_ERR_* value that userspace understands. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 848fb2aa4ca3..88dafdf45c47 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -843,7 +843,7 @@ more: if (rc == -EAGAIN) goto nomore; else { - iscsi_conn_failure(conn, rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return 0; } } @@ -859,7 +859,7 @@ more: } tcp_conn->in_progress = IN_PROGRESS_DATA_RECV; } else if (rc) { - iscsi_conn_failure(conn, rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return 0; } } @@ -897,7 +897,7 @@ more: if (rc) { if (rc == -EAGAIN) goto again; - iscsi_conn_failure(conn, rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return 0; } tcp_conn->in.copy -= tcp_conn->in.padding; -- cgit v1.2.2 From b6c395ed0387c824ddf125d3b74b576a2575c149 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:15 -0500 Subject: [SCSI] iscsi bugfixes: fix r2t handling The iscsi tcp code can pluck multiple rt2s from the tasks's r2tqueue in the xmit code. This can result in the task being queued on the xmit queue but gettting completed at the same time. This patch fixes the above bug by making the fifo a list so we always remove the entry on the list del. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 45 +++++++++++------------- drivers/scsi/libiscsi.c | 90 ++++++++++++++++++++---------------------------- include/scsi/libiscsi.h | 10 +++++- 3 files changed, 68 insertions(+), 77 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 88dafdf45c47..ab324d984b8d 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -185,11 +185,19 @@ iscsi_hdr_extract(struct iscsi_tcp_conn *tcp_conn) * must be called with session lock */ static void -__iscsi_ctask_cleanup(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; + struct iscsi_r2t_info *r2t; struct scsi_cmnd *sc; + /* flush ctask's r2t queues */ + while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) { + __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, + sizeof(void*)); + debug_scsi("iscsi_tcp_cleanup_ctask pending r2t dropped\n"); + } + sc = ctask->sc; if (unlikely(!sc)) return; @@ -374,6 +382,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) spin_unlock(&session->lock); return 0; } + rc = __kfifo_get(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*)); BUG_ON(!rc); @@ -399,7 +408,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) tcp_ctask->exp_r2tsn = r2tsn + 1; tcp_ctask->xmstate |= XMSTATE_SOL_HDR; __kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*)); - __kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*)); + list_move_tail(&ctask->running, &conn->xmitqueue); scsi_queue_work(session->host, &conn->xmitwork); conn->r2t_pdus_cnt++; @@ -484,7 +493,7 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) goto copy_hdr; spin_lock(&session->lock); - __iscsi_ctask_cleanup(conn, tcp_conn->in.ctask); + iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask); rc = __iscsi_complete_pdu(conn, hdr, NULL, 0); spin_unlock(&session->lock); break; @@ -745,10 +754,11 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn) done: /* check for non-exceptional status */ if (tcp_conn->in.hdr->flags & ISCSI_FLAG_DATA_STATUS) { - debug_scsi("done [sc %lx res %d itt 0x%x]\n", - (long)sc, sc->result, ctask->itt); + debug_scsi("done [sc %lx res %d itt 0x%x flags 0x%x]\n", + (long)sc, sc->result, ctask->itt, + tcp_conn->in.hdr->flags); spin_lock(&conn->session->lock); - __iscsi_ctask_cleanup(conn, ctask); + iscsi_tcp_cleanup_ctask(conn, ctask); __iscsi_complete_pdu(conn, tcp_conn->in.hdr, NULL, 0); spin_unlock(&conn->session->lock); } @@ -769,7 +779,7 @@ iscsi_data_recv(struct iscsi_conn *conn) break; case ISCSI_OP_SCSI_CMD_RSP: spin_lock(&conn->session->lock); - __iscsi_ctask_cleanup(conn, tcp_conn->in.ctask); + iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask); spin_unlock(&conn->session->lock); case ISCSI_OP_TEXT_RSP: case ISCSI_OP_LOGIN_RSP: @@ -1308,7 +1318,7 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask) ctask->imm_count - ctask->unsol_count; - debug_scsi("cmd [itt %x total %d imm %d imm_data %d " + debug_scsi("cmd [itt 0x%x total %d imm %d imm_data %d " "r2t_data %d]\n", ctask->itt, ctask->total_length, ctask->imm_count, ctask->unsol_count, tcp_ctask->r2t_data_count); @@ -1636,7 +1646,7 @@ handle_xmstate_sol_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) } solicit_again: /* - * send Data-Out whitnin this R2T sequence. + * send Data-Out within this R2T sequence. */ if (!r2t->data_count) goto data_out_done; @@ -1731,7 +1741,7 @@ handle_xmstate_w_pad(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct iscsi_data_task *dtask = tcp_ctask->dtask; - int sent, rc; + int sent = 0, rc; tcp_ctask->xmstate &= ~XMSTATE_W_PAD; iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad, @@ -2001,20 +2011,6 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, return 0; } -static void -iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_r2t_info *r2t; - - /* flush ctask's r2t queues */ - while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) - __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, - sizeof(void*)); - - __iscsi_ctask_cleanup(conn, ctask); -} - static void iscsi_tcp_suspend_conn_rx(struct iscsi_conn *conn) { @@ -2057,6 +2053,7 @@ iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask, iscsi_buf_init_iov(&tcp_mtask->headbuf, (char*)mtask->hdr, sizeof(struct iscsi_hdr)); tcp_mtask->xmstate = XMSTATE_IMM_HDR; + tcp_mtask->sent = 0; if (mtask->data_count) iscsi_buf_init_iov(&tcp_mtask->sendbuf, (char*)mtask->data, diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 7e6e031cc41b..1a8cd20f484f 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -189,6 +189,7 @@ static void iscsi_complete_command(struct iscsi_session *session, { struct scsi_cmnd *sc = ctask->sc; + ctask->state = ISCSI_TASK_COMPLETED; ctask->sc = NULL; list_del_init(&ctask->running); __kfifo_put(session->cmdpool.queue, (void*)&ctask, sizeof(void*)); @@ -568,20 +569,24 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) } /* process command queue */ - while (__kfifo_get(conn->xmitqueue, (void*)&conn->ctask, - sizeof(void*))) { + spin_lock_bh(&conn->session->lock); + while (!list_empty(&conn->xmitqueue)) { /* * iscsi tcp may readd the task to the xmitqueue to send * write data */ - spin_lock_bh(&conn->session->lock); - if (list_empty(&conn->ctask->running)) - list_add_tail(&conn->ctask->running, &conn->run_list); + conn->ctask = list_entry(conn->xmitqueue.next, + struct iscsi_cmd_task, running); + conn->ctask->state = ISCSI_TASK_RUNNING; + list_move_tail(conn->xmitqueue.next, &conn->run_list); spin_unlock_bh(&conn->session->lock); + rc = tt->xmit_cmd_task(conn, conn->ctask); if (rc) goto again; + spin_lock_bh(&conn->session->lock); } + spin_unlock_bh(&conn->session->lock); /* done with this ctask */ conn->ctask = NULL; @@ -691,6 +696,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) sc->SCp.phase = session->age; sc->SCp.ptr = (char *)ctask; + ctask->state = ISCSI_TASK_PENDING; ctask->mtask = NULL; ctask->conn = conn; ctask->sc = sc; @@ -700,7 +706,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) session->tt->init_cmd_task(ctask); - __kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*)); + list_add_tail(&ctask->running, &conn->xmitqueue); debug_scsi( "ctask enq [%s cid %d sc %lx itt 0x%x len %d cmdsn %d win %d]\n", sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read", @@ -977,31 +983,27 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc, /* * xmit mutex and session lock must be held */ -#define iscsi_remove_task(tasktype) \ -static struct iscsi_##tasktype * \ -iscsi_remove_##tasktype(struct kfifo *fifo, uint32_t itt) \ -{ \ - int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*); \ - struct iscsi_##tasktype *task; \ - \ - debug_scsi("searching %d tasks\n", nr_tasks); \ - \ - for (i = 0; i < nr_tasks; i++) { \ - __kfifo_get(fifo, (void*)&task, sizeof(void*)); \ - debug_scsi("check task %u\n", task->itt); \ - \ - if (task->itt == itt) { \ - debug_scsi("matched task\n"); \ - return task; \ - } \ - \ - __kfifo_put(fifo, (void*)&task, sizeof(void*)); \ - } \ - return NULL; \ -} +static struct iscsi_mgmt_task * +iscsi_remove_mgmt_task(struct kfifo *fifo, uint32_t itt) +{ + int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*); + struct iscsi_mgmt_task *task; + + debug_scsi("searching %d tasks\n", nr_tasks); + + for (i = 0; i < nr_tasks; i++) { + __kfifo_get(fifo, (void*)&task, sizeof(void*)); + debug_scsi("check task %u\n", task->itt); + + if (task->itt == itt) { + debug_scsi("matched task\n"); + return task; + } -iscsi_remove_task(mgmt_task); -iscsi_remove_task(cmd_task); + __kfifo_put(fifo, (void*)&task, sizeof(void*)); + } + return NULL; +} static int iscsi_ctask_mtask_cleanup(struct iscsi_cmd_task *ctask) { @@ -1043,7 +1045,6 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) struct iscsi_cmd_task *ctask = (struct iscsi_cmd_task *)sc->SCp.ptr; struct iscsi_conn *conn = ctask->conn; struct iscsi_session *session = conn->session; - struct iscsi_cmd_task *pending_ctask; int rc; conn->eh_abort_cnt++; @@ -1071,17 +1072,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) goto failed; } - /* check for the easy pending cmd abort */ - pending_ctask = iscsi_remove_cmd_task(conn->xmitqueue, ctask->itt); - if (pending_ctask) { - /* iscsi_tcp queues write transfers on the xmitqueue */ - if (list_empty(&pending_ctask->running)) { - debug_scsi("found pending task\n"); - goto success; - } else - __kfifo_put(conn->xmitqueue, (void*)&pending_ctask, - sizeof(void*)); - } + if (ctask->state == ISCSI_TASK_PENDING) + goto success; conn->tmabort_state = TMABORT_INITIAL; @@ -1263,6 +1255,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, if (cmd_task_size) ctask->dd_data = &ctask[1]; ctask->itt = cmd_i; + INIT_LIST_HEAD(&ctask->running); } spin_lock_init(&session->lock); @@ -1282,6 +1275,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, if (mgmt_task_size) mtask->dd_data = &mtask[1]; mtask->itt = ISCSI_MGMT_ITT_OFFSET + cmd_i; + INIT_LIST_HEAD(&mtask->running); } if (scsi_add_host(shost, NULL)) @@ -1361,12 +1355,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) conn->tmabort_state = TMABORT_INITIAL; INIT_LIST_HEAD(&conn->run_list); INIT_LIST_HEAD(&conn->mgmt_run_list); - - /* initialize general xmit PDU commands queue */ - conn->xmitqueue = kfifo_alloc(session->cmds_max * sizeof(void*), - GFP_KERNEL, NULL); - if (conn->xmitqueue == ERR_PTR(-ENOMEM)) - goto xmitqueue_alloc_fail; + INIT_LIST_HEAD(&conn->xmitqueue); /* initialize general immediate & non-immediate PDU commands queue */ conn->immqueue = kfifo_alloc(session->mgmtpool_max * sizeof(void*), @@ -1410,8 +1399,6 @@ login_mtask_alloc_fail: mgmtqueue_alloc_fail: kfifo_free(conn->immqueue); immqueue_alloc_fail: - kfifo_free(conn->xmitqueue); -xmitqueue_alloc_fail: iscsi_destroy_conn(cls_conn); return NULL; } @@ -1489,7 +1476,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) session->cmdsn = session->max_cmdsn = session->exp_cmdsn = 1; spin_unlock_bh(&session->lock); - kfifo_free(conn->xmitqueue); kfifo_free(conn->immqueue); kfifo_free(conn->mgmtqueue); @@ -1572,7 +1558,7 @@ static void fail_all_commands(struct iscsi_conn *conn) struct iscsi_cmd_task *ctask, *tmp; /* flush pending */ - while (__kfifo_get(conn->xmitqueue, (void*)&ctask, sizeof(void*))) { + list_for_each_entry_safe(ctask, tmp, &conn->xmitqueue, running) { debug_scsi("failing pending sc %p itt 0x%x\n", ctask->sc, ctask->itt); fail_command(conn, ctask, DID_BUS_BUSY << 16); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index ba2760802ded..e71d6e96eca6 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -83,6 +83,12 @@ struct iscsi_mgmt_task { struct list_head running; }; +enum { + ISCSI_TASK_COMPLETED, + ISCSI_TASK_PENDING, + ISCSI_TASK_RUNNING, +}; + struct iscsi_cmd_task { /* * Becuae LLDs allocate their hdr differently, this is a pointer to @@ -101,6 +107,8 @@ struct iscsi_cmd_task { struct iscsi_conn *conn; /* used connection */ struct iscsi_mgmt_task *mtask; /* tmf mtask in progr */ + /* state set/tested under session->lock */ + int state; struct list_head running; /* running cmd list */ void *dd_data; /* driver/transport data */ }; @@ -134,7 +142,7 @@ struct iscsi_conn { struct kfifo *immqueue; /* immediate xmit queue */ struct kfifo *mgmtqueue; /* mgmt (control) xmit queue */ struct list_head mgmt_run_list; /* list of control tasks */ - struct kfifo *xmitqueue; /* data-path cmd queue */ + struct list_head xmitqueue; /* data-path cmd queue */ struct list_head run_list; /* list of cmds in progress */ struct work_struct xmitwork; /* per-conn. xmit workqueue */ /* -- cgit v1.2.2 From 275fd7d129fdd16d1dc0ec6a8d60bd6b72a76e31 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:17 -0500 Subject: [SCSI] iscsi bugfixes: handle data rsp errors if iscsi_data_rsp fails we must bail out. Since the pdu values like data length are invalid we cannot continue to process the data since it could over run buffers. This fixes a bug with cisco 5428s where that target is sending too much data. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index ab324d984b8d..7d784596a1ea 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -486,6 +486,8 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) case ISCSI_OP_SCSI_DATA_IN: tcp_conn->in.ctask = session->cmds[itt]; rc = iscsi_data_rsp(conn, tcp_conn->in.ctask); + if (rc) + return rc; /* fall through */ case ISCSI_OP_SCSI_CMD_RSP: tcp_conn->in.ctask = session->cmds[itt]; @@ -532,7 +534,7 @@ copy_hdr: * skbs to complete the command then we have to copy the header * for later use */ - if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy < + if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy <= (tcp_conn->in.datalen + tcp_conn->in.padding + (conn->datadgst_en ? 4 : 0))) { debug_tcp("Copying header for later use. in.copy %d in.datalen" -- cgit v1.2.2 From 7ea8b82847293c2311cf08fc3ed31ab0e452a27e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:22 -0500 Subject: [SCSI] iscsi bugfixes: fix abort handling Abort handler fixes. If a connection is dropped and reconnected while an abort is running then we should assume the recovery code will clean up the abort. Not doing so causes a oops. And if a command completes then we get the status for the abort, we do not need to call into the LLD to cleanup the resources. Doing this causes and oops in iser because it ends up freeing some resources twice. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 71 ++++++++++++++++++++++++++++++++----------------- include/scsi/libiscsi.h | 1 + 2 files changed, 47 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 1a8cd20f484f..4e2ca8f7d9a1 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -276,6 +276,25 @@ out: return rc; } +static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr) +{ + struct iscsi_tm_rsp *tmf = (struct iscsi_tm_rsp *)hdr; + + conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; + conn->tmfrsp_pdus_cnt++; + + if (conn->tmabort_state != TMABORT_INITIAL) + return; + + if (tmf->response == ISCSI_TMF_RSP_COMPLETE) + conn->tmabort_state = TMABORT_SUCCESS; + else if (tmf->response == ISCSI_TMF_RSP_NO_TASK) + conn->tmabort_state = TMABORT_NOT_FOUND; + else + conn->tmabort_state = TMABORT_FAILED; + wake_up(&conn->ehwait); +} + /** * __iscsi_complete_pdu - complete pdu * @conn: iscsi conn @@ -361,16 +380,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, break; } - conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; - conn->tmfrsp_pdus_cnt++; - if (conn->tmabort_state == TMABORT_INITIAL) { - conn->tmabort_state = - ((struct iscsi_tm_rsp *)hdr)-> - response == ISCSI_TMF_RSP_COMPLETE ? - TMABORT_SUCCESS:TMABORT_FAILED; - /* unblock eh_abort() */ - wake_up(&conn->ehwait); - } + iscsi_tmf_rsp(conn, hdr); break; case ISCSI_OP_NOOP_IN: if (hdr->ttt != ISCSI_RESERVED_TAG) { @@ -1029,12 +1039,13 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, { struct scsi_cmnd *sc; - conn->session->tt->cleanup_cmd_task(conn, ctask); - iscsi_ctask_mtask_cleanup(ctask); - sc = ctask->sc; if (!sc) return; + + conn->session->tt->cleanup_cmd_task(conn, ctask); + iscsi_ctask_mtask_cleanup(ctask); + sc->result = err; sc->resid = sc->request_bufflen; iscsi_complete_command(conn->session, ctask); @@ -1062,8 +1073,11 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) goto failed; /* ctask completed before time out */ - if (!ctask->sc) - goto success; + if (!ctask->sc) { + spin_unlock_bh(&session->lock); + debug_scsi("sc completed while abort in progress\n"); + goto success_rel_mutex; + } /* what should we do here ? */ if (conn->ctask == ctask) { @@ -1073,7 +1087,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) } if (ctask->state == ISCSI_TASK_PENDING) - goto success; + goto success_cleanup; conn->tmabort_state = TMABORT_INITIAL; @@ -1081,25 +1095,31 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) rc = iscsi_exec_abort_task(sc, ctask); spin_lock_bh(&session->lock); - iscsi_ctask_mtask_cleanup(ctask); if (rc || sc->SCp.phase != session->age || session->state != ISCSI_STATE_LOGGED_IN) goto failed; + iscsi_ctask_mtask_cleanup(ctask); - /* ctask completed before tmf abort response */ - if (!ctask->sc) { - debug_scsi("sc completed while abort in progress\n"); - goto success; - } - - if (conn->tmabort_state != TMABORT_SUCCESS) { + switch (conn->tmabort_state) { + case TMABORT_SUCCESS: + goto success_cleanup; + case TMABORT_NOT_FOUND: + if (!ctask->sc) { + /* ctask completed before tmf abort response */ + spin_unlock_bh(&session->lock); + debug_scsi("sc completed while abort in progress\n"); + goto success_rel_mutex; + } + /* fall through */ + default: + /* timedout or failed */ spin_unlock_bh(&session->lock); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); spin_lock_bh(&session->lock); goto failed; } -success: +success_cleanup: debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt); spin_unlock_bh(&session->lock); @@ -1113,6 +1133,7 @@ success: spin_unlock(&session->lock); write_unlock_bh(conn->recv_lock); +success_rel_mutex: mutex_unlock(&conn->xmitmutex); return SUCCESS; diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index e71d6e96eca6..3f69f7e58f89 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -60,6 +60,7 @@ struct iscsi_nopin; #define TMABORT_SUCCESS 0x1 #define TMABORT_FAILED 0x2 #define TMABORT_TIMEDOUT 0x3 +#define TMABORT_NOT_FOUND 0x4 /* Connection suspend "bit" */ #define ISCSI_SUSPEND_BIT 1 -- cgit v1.2.2 From 1c83469d36a9dd30dbf1fb9fc5ca3be3a0e64ff4 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:26 -0500 Subject: [SCSI] iscsi bugfixes: fix oops when iser is flushing io When we enter recovery and flush the running commands we cannot freee the connection before flushing the commands. Some commands may have a reference to the connection that needs to be released before. iscsi_stop was forcing the term and suspend too early and was causing a oops in iser, so this patch removes those callbacks all together and allows the LLD to handle that detail. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/infiniband/ulp/iser/iscsi_iser.c | 22 +---------- drivers/scsi/iscsi_tcp.c | 67 ++++++++++++++------------------ drivers/scsi/libiscsi.c | 12 ++---- include/scsi/scsi_transport_iscsi.h | 4 -- 4 files changed, 34 insertions(+), 71 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 34b0da5cfa0a..1437d7ee3b19 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -378,21 +378,6 @@ iscsi_iser_conn_start(struct iscsi_cls_conn *cls_conn) return iser_conn_set_full_featured_mode(conn); } -static void -iscsi_iser_conn_terminate(struct iscsi_conn *conn) -{ - struct iscsi_iser_conn *iser_conn = conn->dd_data; - struct iser_conn *ib_conn = iser_conn->ib_conn; - - BUG_ON(!ib_conn); - /* starts conn teardown process, waits until all previously * - * posted buffers get flushed, deallocates all conn resources */ - iser_conn_terminate(ib_conn); - iser_conn->ib_conn = NULL; - conn->recv_lock = NULL; -} - - static struct iscsi_transport iscsi_iser_transport; static struct iscsi_cls_session * @@ -555,13 +540,13 @@ iscsi_iser_ep_poll(__u64 ep_handle, int timeout_ms) static void iscsi_iser_ep_disconnect(__u64 ep_handle) { - struct iser_conn *ib_conn = iscsi_iser_ib_conn_lookup(ep_handle); + struct iser_conn *ib_conn; + ib_conn = iscsi_iser_ib_conn_lookup(ep_handle); if (!ib_conn) return; iser_err("ib conn %p state %d\n",ib_conn, ib_conn->state); - iser_conn_terminate(ib_conn); } @@ -614,9 +599,6 @@ static struct iscsi_transport iscsi_iser_transport = { .get_session_param = iscsi_session_get_param, .start_conn = iscsi_iser_conn_start, .stop_conn = iscsi_conn_stop, - /* these are called as part of conn recovery */ - .suspend_conn_recv = NULL, /* FIXME is/how this relvant to iser? */ - .terminate_conn = iscsi_iser_conn_terminate, /* IO */ .send_pdu = iscsi_conn_send_pdu, .get_stats = iscsi_iser_conn_get_stats, diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 7d784596a1ea..b6c68be6b866 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1040,9 +1040,8 @@ iscsi_conn_set_callbacks(struct iscsi_conn *conn) } static void -iscsi_conn_restore_callbacks(struct iscsi_conn *conn) +iscsi_conn_restore_callbacks(struct iscsi_tcp_conn *tcp_conn) { - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct sock *sk = tcp_conn->sock->sk; /* restore socket callbacks, see also: iscsi_conn_set_callbacks() */ @@ -1932,6 +1931,23 @@ tcp_conn_alloc_fail: return NULL; } +static void +iscsi_tcp_release_conn(struct iscsi_conn *conn) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + + if (!tcp_conn->sock) + return; + + sock_hold(tcp_conn->sock->sk); + iscsi_conn_restore_callbacks(tcp_conn); + sock_put(tcp_conn->sock->sk); + + sock_release(tcp_conn->sock); + tcp_conn->sock = NULL; + conn->recv_lock = NULL; +} + static void iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) { @@ -1942,6 +1958,7 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) if (conn->hdrdgst_en || conn->datadgst_en) digest = 1; + iscsi_tcp_release_conn(conn); iscsi_conn_teardown(cls_conn); /* now free tcp_conn */ @@ -1965,6 +1982,15 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) kfree(tcp_conn); } +static void +iscsi_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + + iscsi_conn_stop(cls_conn, flag); + iscsi_tcp_release_conn(conn); +} + static int iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, struct iscsi_cls_conn *cls_conn, uint64_t transport_eph, @@ -2013,38 +2039,6 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, return 0; } -static void -iscsi_tcp_suspend_conn_rx(struct iscsi_conn *conn) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - struct sock *sk; - - if (!tcp_conn->sock) - return; - - sk = tcp_conn->sock->sk; - write_lock_bh(&sk->sk_callback_lock); - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); - write_unlock_bh(&sk->sk_callback_lock); -} - -static void -iscsi_tcp_terminate_conn(struct iscsi_conn *conn) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - - if (!tcp_conn->sock) - return; - - sock_hold(tcp_conn->sock->sk); - iscsi_conn_restore_callbacks(conn); - sock_put(tcp_conn->sock->sk); - - sock_release(tcp_conn->sock); - tcp_conn->sock = NULL; - conn->recv_lock = NULL; -} - /* called with host lock */ static void iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask, @@ -2413,10 +2407,7 @@ static struct iscsi_transport iscsi_tcp_transport = { .get_conn_param = iscsi_tcp_conn_get_param, .get_session_param = iscsi_session_get_param, .start_conn = iscsi_conn_start, - .stop_conn = iscsi_conn_stop, - /* these are called as part of conn recovery */ - .suspend_conn_recv = iscsi_tcp_suspend_conn_rx, - .terminate_conn = iscsi_tcp_terminate_conn, + .stop_conn = iscsi_tcp_conn_stop, /* IO */ .send_pdu = iscsi_conn_send_pdu, .get_stats = iscsi_conn_get_stats, diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 4e2ca8f7d9a1..36f520b9260e 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1440,12 +1440,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); mutex_lock(&conn->xmitmutex); - if (conn->c_stage == ISCSI_CONN_INITIAL_STAGE) { - if (session->tt->suspend_conn_recv) - session->tt->suspend_conn_recv(conn); - - session->tt->terminate_conn(conn); - } spin_lock_bh(&session->lock); conn->c_stage = ISCSI_CONN_CLEANUP_WAIT; @@ -1622,8 +1616,9 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); spin_unlock_bh(&session->lock); - if (session->tt->suspend_conn_recv) - session->tt->suspend_conn_recv(conn); + write_lock_bh(conn->recv_lock); + set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); + write_unlock_bh(conn->recv_lock); mutex_lock(&conn->xmitmutex); /* @@ -1642,7 +1637,6 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, } } - session->tt->terminate_conn(conn); /* * flush queues. */ diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 5a3df1d7085f..39e833260bd0 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -57,8 +57,6 @@ struct sockaddr; * @stop_conn: suspend/recover/terminate connection * @send_pdu: send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text. * @session_recovery_timedout: notify LLD a block during recovery timed out - * @suspend_conn_recv: susepend the recv side of the connection - * @termincate_conn: destroy socket connection. Called with mutex lock. * @init_cmd_task: Initialize a iscsi_cmd_task and any internal structs. * Called from queuecommand with session lock held. * @init_mgmt_task: Initialize a iscsi_mgmt_task and any internal structs. @@ -112,8 +110,6 @@ struct iscsi_transport { char *data, uint32_t data_size); void (*get_stats) (struct iscsi_cls_conn *conn, struct iscsi_stats *stats); - void (*suspend_conn_recv) (struct iscsi_conn *conn); - void (*terminate_conn) (struct iscsi_conn *conn); void (*init_cmd_task) (struct iscsi_cmd_task *ctask); void (*init_mgmt_task) (struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask, -- cgit v1.2.2 From 63f75cc8a7e6ce453e38a7b90cdcae83d63f1ea7 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:29 -0500 Subject: [SCSI] iscsi bugfixes: fix oops when removing session We are touching the cls_session after we have freed it. This causes a oops. Signed-off-by: Or Gerlitz Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 36f520b9260e..c989bc6180b3 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1337,6 +1337,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) { struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); struct iscsi_session *session = iscsi_hostdata(shost->hostdata); + struct module *owner = cls_session->transport->owner; scsi_remove_host(shost); @@ -1345,7 +1346,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) iscsi_destroy_session(cls_session); scsi_host_put(shost); - module_put(cls_session->transport->owner); + module_put(owner); } EXPORT_SYMBOL_GPL(iscsi_session_teardown); -- cgit v1.2.2 From 9aaa2b4621280b6de1ecfb6dd7cd5cbe59fd1264 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:34 -0500 Subject: [SCSI] iscsi bugfixes: dont use GFP_KERNEL for sending errors iscsi_tcp can send error events from soft irq context so we cannot use GFP_KERNEL. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 7b9e8fa1a4e0..30a47c133091 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -634,13 +634,13 @@ mempool_zone_get_skb(struct mempool_zone *zone) } static int -iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb) +iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb, gfp_t gfp) { unsigned long flags; int rc; skb_get(skb); - rc = netlink_broadcast(nls, skb, 0, 1, GFP_KERNEL); + rc = netlink_broadcast(nls, skb, 0, 1, gfp); if (rc < 0) { mempool_free(skb, zone->pool); printk(KERN_ERR "iscsi: can not broadcast skb (%d)\n", rc); @@ -749,7 +749,7 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) ev->r.connerror.cid = conn->cid; ev->r.connerror.sid = iscsi_conn_get_sid(conn); - iscsi_broadcast_skb(conn->z_error, skb); + iscsi_broadcast_skb(conn->z_error, skb, GFP_ATOMIC); dev_printk(KERN_INFO, &conn->dev, "iscsi: detected conn error (%d)\n", error); @@ -895,7 +895,7 @@ int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn) * this will occur if the daemon is not up, so we just warn * the user and when the daemon is restarted it will handle it */ - rc = iscsi_broadcast_skb(conn->z_pdu, skb); + rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL); if (rc < 0) dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " "session destruction event. Check iscsi daemon\n"); @@ -958,7 +958,7 @@ int iscsi_if_create_session_done(struct iscsi_cls_conn *conn) * this will occur if the daemon is not up, so we just warn * the user and when the daemon is restarted it will handle it */ - rc = iscsi_broadcast_skb(conn->z_pdu, skb); + rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL); if (rc < 0) dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " "session creation event. Check iscsi daemon\n"); -- cgit v1.2.2 From c8dc1e523b0f1e6dd71cdabd8c7d7587c6dc27f9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:39 -0500 Subject: [SCSI] iscsi bugfixes: reduce memory allocations We currently try to allocate a max_recv_data_segment_length which can be very large (default is 64K), and common uses are up to 1MB. It is very very difficult to allocte this much contiguous memory and it turns out we never even use it. We really only need a couple of pages, so this patch has us allocates just what we know what we need today. Later if vendors start adding vendor specific data and we need to handle large buffers we can do this, but for the last 4 years we have not seen anyone do this or request it. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 83 ++++++++++++++---------------------------------- drivers/scsi/iscsi_tcp.h | 2 -- drivers/scsi/libiscsi.c | 10 ++++-- include/scsi/libiscsi.h | 8 +++++ 4 files changed, 38 insertions(+), 65 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index b6c68be6b866..aa20adc79f02 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -511,13 +511,28 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) break; case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: - case ISCSI_OP_LOGOUT_RSP: - case ISCSI_OP_NOOP_IN: case ISCSI_OP_REJECT: case ISCSI_OP_ASYNC_EVENT: + /* + * It is possible that we could get a PDU with a buffer larger + * than 8K, but there are no targets that currently do this. + * For now we fail until we find a vendor that needs it + */ + if (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH < + tcp_conn->in.datalen) { + printk(KERN_ERR "iscsi_tcp: received buffer of len %u " + "but conn buffer is only %u (opcode %0x)\n", + tcp_conn->in.datalen, + DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, opcode); + rc = ISCSI_ERR_PROTO; + break; + } + if (tcp_conn->in.datalen) goto copy_hdr; /* fall through */ + case ISCSI_OP_LOGOUT_RSP: + case ISCSI_OP_NOOP_IN: case ISCSI_OP_SCSI_TMFUNC_RSP: rc = iscsi_complete_pdu(conn, hdr, NULL, 0); break; @@ -625,9 +640,9 @@ iscsi_ctask_copy(struct iscsi_tcp_conn *tcp_conn, struct iscsi_cmd_task *ctask, * byte counters. **/ static inline int -iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn) +iscsi_tcp_copy(struct iscsi_conn *conn) { - void *buf = tcp_conn->data; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; int buf_size = tcp_conn->in.datalen; int buf_left = buf_size - tcp_conn->data_copied; int size = min(tcp_conn->in.copy, buf_left); @@ -638,7 +653,7 @@ iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn) BUG_ON(size <= 0); rc = skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset, - (char*)buf + tcp_conn->data_copied, size); + (char*)conn->data + tcp_conn->data_copied, size); BUG_ON(rc); tcp_conn->in.offset += size; @@ -785,22 +800,21 @@ iscsi_data_recv(struct iscsi_conn *conn) spin_unlock(&conn->session->lock); case ISCSI_OP_TEXT_RSP: case ISCSI_OP_LOGIN_RSP: - case ISCSI_OP_NOOP_IN: case ISCSI_OP_ASYNC_EVENT: case ISCSI_OP_REJECT: /* * Collect data segment to the connection's data * placeholder */ - if (iscsi_tcp_copy(tcp_conn)) { + if (iscsi_tcp_copy(conn)) { rc = -EAGAIN; goto exit; } - rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, tcp_conn->data, + rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, conn->data, tcp_conn->in.datalen); if (!rc && conn->datadgst_en && opcode != ISCSI_OP_LOGIN_RSP) - iscsi_recv_digest_update(tcp_conn, tcp_conn->data, + iscsi_recv_digest_update(tcp_conn, conn->data, tcp_conn->in.datalen); break; default: @@ -1911,21 +1925,9 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx) tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; /* initial operational parameters */ tcp_conn->hdr_size = sizeof(struct iscsi_hdr); - tcp_conn->data_size = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH; - - /* allocate initial PDU receive place holder */ - if (tcp_conn->data_size <= PAGE_SIZE) - tcp_conn->data = kmalloc(tcp_conn->data_size, GFP_KERNEL); - else - tcp_conn->data = (void*)__get_free_pages(GFP_KERNEL, - get_order(tcp_conn->data_size)); - if (!tcp_conn->data) - goto max_recv_dlenght_alloc_fail; return cls_conn; -max_recv_dlenght_alloc_fail: - kfree(tcp_conn); tcp_conn_alloc_fail: iscsi_conn_teardown(cls_conn); return NULL; @@ -1973,12 +1975,6 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) crypto_free_tfm(tcp_conn->data_rx_tfm); } - /* free conn->data, size = MaxRecvDataSegmentLength */ - if (tcp_conn->data_size <= PAGE_SIZE) - kfree(tcp_conn->data); - else - free_pages((unsigned long)tcp_conn->data, - get_order(tcp_conn->data_size)); kfree(tcp_conn); } @@ -2131,39 +2127,6 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, int value; switch(param) { - case ISCSI_PARAM_MAX_RECV_DLENGTH: { - char *saveptr = tcp_conn->data; - gfp_t flags = GFP_KERNEL; - - sscanf(buf, "%d", &value); - if (tcp_conn->data_size >= value) { - iscsi_set_param(cls_conn, param, buf, buflen); - break; - } - - spin_lock_bh(&session->lock); - if (conn->stop_stage == STOP_CONN_RECOVER) - flags = GFP_ATOMIC; - spin_unlock_bh(&session->lock); - - if (value <= PAGE_SIZE) - tcp_conn->data = kmalloc(value, flags); - else - tcp_conn->data = (void*)__get_free_pages(flags, - get_order(value)); - if (tcp_conn->data == NULL) { - tcp_conn->data = saveptr; - return -ENOMEM; - } - if (tcp_conn->data_size <= PAGE_SIZE) - kfree(saveptr); - else - free_pages((unsigned long)saveptr, - get_order(tcp_conn->data_size)); - iscsi_set_param(cls_conn, param, buf, buflen); - tcp_conn->data_size = value; - break; - } case ISCSI_PARAM_HDRDGST_EN: iscsi_set_param(cls_conn, param, buf, buflen); tcp_conn->hdr_size = sizeof(struct iscsi_hdr); diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index 808302832e68..6a4ee704e46e 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -78,8 +78,6 @@ struct iscsi_tcp_conn { char hdrext[4*sizeof(__u16) + sizeof(__u32)]; int data_copied; - char *data; /* data placeholder */ - int data_size; /* actual recv_dlength */ int stop_stage; /* conn_stop() flag: * * stop to recover, * * stop to terminate */ diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index c989bc6180b3..03b3dee49009 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -360,6 +360,10 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, switch(opcode) { case ISCSI_OP_LOGOUT_RSP: + if (datalen) { + rc = ISCSI_ERR_PROTO; + break; + } conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; /* fall through */ case ISCSI_OP_LOGIN_RSP: @@ -383,7 +387,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, iscsi_tmf_rsp(conn, hdr); break; case ISCSI_OP_NOOP_IN: - if (hdr->ttt != ISCSI_RESERVED_TAG) { + if (hdr->ttt != ISCSI_RESERVED_TAG || datalen) { rc = ISCSI_ERR_PROTO; break; } @@ -1405,7 +1409,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) data = kmalloc(DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, GFP_KERNEL); if (!data) goto login_mtask_data_alloc_fail; - conn->login_mtask->data = data; + conn->login_mtask->data = conn->data = data; init_timer(&conn->tmabort_timer); mutex_init(&conn->xmitmutex); @@ -1477,7 +1481,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) } spin_lock_bh(&session->lock); - kfree(conn->login_mtask->data); + kfree(conn->data); __kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask, sizeof(void*)); list_del(&conn->item); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 3f69f7e58f89..41904f611d12 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -135,6 +135,14 @@ struct iscsi_conn { int id; /* CID */ struct list_head item; /* maintains list of conns */ int c_stage; /* connection state */ + /* + * Preallocated buffer for pdus that have data but do not + * originate from scsi-ml. We never have two pdus using the + * buffer at the same time. It is only allocated to + * the default max recv size because the pdus we support + * should always fit in this buffer + */ + char *data; struct iscsi_mgmt_task *login_mtask; /* mtask used for login/text */ struct iscsi_mgmt_task *mtask; /* xmit mtask in progress */ struct iscsi_cmd_task *ctask; /* xmit ctask in progress */ -- cgit v1.2.2 From 40527afea1a3b18ee5754e17d6f807176e03f1f2 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:45 -0500 Subject: [SCSI] iscsi bugfixes: pass errors from complete_pdu to caller Must pass ISCSI_ERR values from the recv path and propogate them upwards. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 2 +- drivers/scsi/libiscsi.c | 27 ++++++++++++++++++--------- 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index aa20adc79f02..33534f686434 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -885,7 +885,7 @@ more: } tcp_conn->in_progress = IN_PROGRESS_DATA_RECV; } else if (rc) { - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_failure(conn, rc); return 0; } } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 03b3dee49009..c628c63c51a8 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -372,7 +372,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, * login related PDU's exp_statsn is handled in * userspace */ - rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen); + if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) + rc = ISCSI_ERR_CONN_FAILED; list_del(&mtask->running); if (conn->login_mtask != mtask) __kfifo_put(session->mgmtpool.queue, @@ -393,7 +394,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, } conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; - rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen); + if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) + rc = ISCSI_ERR_CONN_FAILED; list_del(&mtask->running); if (conn->login_mtask != mtask) __kfifo_put(session->mgmtpool.queue, @@ -406,14 +408,21 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, } else if (itt == ISCSI_RESERVED_TAG) { switch(opcode) { case ISCSI_OP_NOOP_IN: - if (!datalen) { - rc = iscsi_check_assign_cmdsn(session, - (struct iscsi_nopin*)hdr); - if (!rc && hdr->ttt != ISCSI_RESERVED_TAG) - rc = iscsi_recv_pdu(conn->cls_conn, - hdr, NULL, 0); - } else + if (datalen) { rc = ISCSI_ERR_PROTO; + break; + } + + rc = iscsi_check_assign_cmdsn(session, + (struct iscsi_nopin*)hdr); + if (rc) + break; + + if (hdr->ttt == ISCSI_RESERVED_TAG) + break; + + if (iscsi_recv_pdu(conn->cls_conn, hdr, NULL, 0)) + rc = ISCSI_ERR_CONN_FAILED; break; case ISCSI_OP_REJECT: /* we need sth like iscsi_reject_rsp()*/ -- cgit v1.2.2 From f3ff0c3627df90aa28be98803b10289bb348e4e6 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:50 -0500 Subject: [SCSI] iscsi bugfixes: fix mem leaks in libiscsi We were leaking some strings. This patch just frees them. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index c628c63c51a8..5884cd26d53a 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1357,6 +1357,8 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds); iscsi_pool_free(&session->cmdpool, (void**)session->cmds); + kfree(session->targetname); + iscsi_destroy_session(cls_session); scsi_host_put(shost); module_put(owner); @@ -1491,6 +1493,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) spin_lock_bh(&session->lock); kfree(conn->data); + kfree(conn->persistent_address); __kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask, sizeof(void*)); list_del(&conn->item); -- cgit v1.2.2 From f4246b33c774bb4330eb6286beed6d3c9f4373c4 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:54 -0500 Subject: [SCSI] iscsi bugfixes: update and move version number The version info is useful for iscsi tcp, iser and qla4xxx so move to transport class. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 6 +----- drivers/scsi/scsi_transport_iscsi.c | 5 +++++ 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 33534f686434..058f094f945a 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -43,13 +43,10 @@ #include "iscsi_tcp.h" -#define ISCSI_TCP_VERSION "1.0-595" - MODULE_AUTHOR("Dmitry Yusupov , " "Alex Aizman "); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -MODULE_VERSION(ISCSI_TCP_VERSION); /* #define DEBUG_TCP */ #define DEBUG_ASSERT @@ -2317,8 +2314,7 @@ static void iscsi_tcp_session_destroy(struct iscsi_cls_session *cls_session) } static struct scsi_host_template iscsi_sht = { - .name = "iSCSI Initiator over TCP/IP, v" - ISCSI_TCP_VERSION, + .name = "iSCSI Initiator over TCP/IP", .queuecommand = iscsi_queuecommand, .change_queue_depth = iscsi_change_queue_depth, .can_queue = ISCSI_XMIT_CMDS_MAX - 1, diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 30a47c133091..2ecd14188574 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -34,6 +34,7 @@ #define ISCSI_SESSION_ATTRS 11 #define ISCSI_CONN_ATTRS 11 #define ISCSI_HOST_ATTRS 0 +#define ISCSI_TRANSPORT_VERSION "1.1-646" struct iscsi_internal { int daemon_pid; @@ -1613,6 +1614,9 @@ static __init int iscsi_transport_init(void) { int err; + printk(KERN_INFO "Loading iSCSI transport class v%s.", + ISCSI_TRANSPORT_VERSION); + err = class_register(&iscsi_transport_class); if (err) return err; @@ -1678,3 +1682,4 @@ MODULE_AUTHOR("Mike Christie , " "Alex Aizman "); MODULE_DESCRIPTION("iSCSI Transport Interface"); MODULE_LICENSE("GPL"); +MODULE_VERSION(ISCSI_TRANSPORT_VERSION); -- cgit v1.2.2 From fbf6080225a03aa2b3671acacebdf615f1d3f6ba Mon Sep 17 00:00:00 2001 From: "Ju, Seokmann" Date: Tue, 25 Jul 2006 08:44:48 -0600 Subject: [SCSI] megaraid_{mm,mbox}: 64-bit DMA capability checker This patch contains - a fix for 64-bit DMA capability check in megaraid_{mm,mbox} driver. - includes changes (going back to 32-bit DMA mask if 64-bit DMA mask failes) suggested by James with previous patch. - addition of SATA 150-4/6 as commented by Vasily Averin. With patch, the driver access PCIconfiguration space with dedicated offset to read a signature. If the signature read, it means that the controller has capability to handle 64-bit DMA. Without this patch, the driver used to blindly claim 64-bit DMA capability. The issue has been reported by Vasily Averin [vvs@sw.ru]. Thank you Vasily for the reporting. Signed-Off By: Seokmann Ju Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid | 61 +++++++++++++++++++++++++++++++++++ drivers/scsi/megaraid/mega_common.h | 3 ++ drivers/scsi/megaraid/megaraid_mbox.c | 34 +++++++++++++++---- drivers/scsi/megaraid/megaraid_mbox.h | 4 +-- 4 files changed, 94 insertions(+), 8 deletions(-) diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index c173806c91fa..fd8939e0045d 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -1,3 +1,64 @@ +Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju +Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module) +Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) + +1. Fixed a bug in megaraid_init_mbox(). + Customer reported "garbage in file on x86_64 platform". + Root Cause: the driver registered controllers as 64-bit DMA capable + for those which are not support it. + Fix: Made change in the function inserting identification machanism + identifying 64-bit DMA capable controllers. + + > -----Original Message----- + > From: Vasily Averin [mailto:vvs@sw.ru] + > Sent: Thursday, May 04, 2006 2:49 PM + > To: linux-scsi@vger.kernel.org; Kolli, Neela; Mukker, Atul; + > Ju, Seokmann; Bagalkote, Sreenivas; + > James.Bottomley@SteelEye.com; devel@openvz.org + > Subject: megaraid_mbox: garbage in file + > + > Hello all, + > + > I've investigated customers claim on the unstable work of + > their node and found a + > strange effect: reading from some files leads to the + > "attempt to access beyond end of device" messages. + > + > I've checked filesystem, memory on the node, motherboard BIOS + > version, but it + > does not help and issue still has been reproduced by simple + > file reading. + > + > Reproducer is simple: + > + > echo 0xffffffff >/proc/sys/dev/scsi/logging_level ; + > cat /vz/private/101/root/etc/ld.so.cache >/tmp/ttt ; + > echo 0 >/proc/sys/dev/scsi/logging + > + > It leads to the following messages in dmesg + > + > sd_init_command: disk=sda, block=871769260, count=26 + > sda : block=871769260 + > sda : reading 26/26 512 byte blocks. + > scsi_add_timer: scmd: f79ed980, time: 7500, (c02b1420) + > sd 0:1:0:0: send 0xf79ed980 sd 0:1:0:0: + > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 + > buffer = 0xf7cfb540, bufflen = 13312, done = 0xc0366b40, + > queuecommand 0xc0344010 + > leaving scsi_dispatch_cmnd() + > scsi_delete_timer: scmd: f79ed980, rtn: 1 + > sd 0:1:0:0: done 0xf79ed980 SUCCESS 0 sd 0:1:0:0: + > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 + > scsi host busy 1 failed 0 + > sd 0:1:0:0: Notifying upper driver of completion (result 0) + > sd_rw_intr: sda: res=0x0 + > 26 sectors total, 13312 bytes done. + > use_sg is 4 + > attempt to access beyond end of device + > sda6: rw=0, want=1044134458, limit=951401367 + > Buffer I/O error on device sda6, logical block 522067228 + > attempt to access beyond end of device + Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module) diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h index 4675343228ad..12e38125b123 100644 --- a/drivers/scsi/megaraid/mega_common.h +++ b/drivers/scsi/megaraid/mega_common.h @@ -37,6 +37,9 @@ #define LSI_MAX_CHANNELS 16 #define LSI_MAX_LOGICAL_DRIVES_64LD (64+1) +#define HBA_SIGNATURE_64_BIT 0x299 +#define PCI_CONF_AMISIG64 0xa4 + /** * scb_t - scsi command control block diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 92715130ac09..e671af0b4f58 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mbox.c - * Version : v2.20.4.8 (Apr 11 2006) + * Version : v2.20.4.9 (Jul 16 2006) * * Authors: * Atul Mukker @@ -720,6 +720,7 @@ megaraid_init_mbox(adapter_t *adapter) struct pci_dev *pdev; mraid_device_t *raid_dev; int i; + uint32_t magic64; adapter->ito = MBOX_TIMEOUT; @@ -863,12 +864,33 @@ megaraid_init_mbox(adapter_t *adapter) // Set the DMA mask to 64-bit. All supported controllers as capable of // DMA in this range - if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) { - - con_log(CL_ANN, (KERN_WARNING - "megaraid: could not set DMA mask for 64-bit.\n")); + pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64); + + if (((magic64 == HBA_SIGNATURE_64_BIT) && + ((adapter->pdev->subsystem_device != + PCI_SUBSYS_ID_MEGARAID_SATA_150_6) || + (adapter->pdev->subsystem_device != + PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_VERDE) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_DOBSON) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) || + (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) || + (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) { + if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK)) { + con_log(CL_ANN, (KERN_WARNING + "megaraid: DMA mask for 64-bit failed\n")); - goto out_free_sysfs_res; + if (pci_set_dma_mask (adapter->pdev, DMA_32BIT_MASK)) { + con_log(CL_ANN, (KERN_WARNING + "megaraid: 32-bit DMA mask failed\n")); + goto out_free_sysfs_res; + } + } } // setup tasklet for DPC diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h index 868fb0ec93e7..2b5a3285f799 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.h +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -21,8 +21,8 @@ #include "megaraid_ioctl.h" -#define MEGARAID_VERSION "2.20.4.8" -#define MEGARAID_EXT_VERSION "(Release Date: Mon Apr 11 12:27:22 EST 2006)" +#define MEGARAID_VERSION "2.20.4.9" +#define MEGARAID_EXT_VERSION "(Release Date: Sun Jul 16 12:27:22 EST 2006)" /* -- cgit v1.2.2 From aa677bc7445147f663ebde69d248a30839bada76 Mon Sep 17 00:00:00 2001 From: "Ju, Seokmann" Date: Tue, 25 Jul 2006 08:44:58 -0600 Subject: [SCSI] megaraid_{mm,mbox}: a fix on INQUIRY with EVPD With this patch, driver will protect data corruption created by INQUIRY with EVPD request to megaraid controllers. As specified in the changelog, megaraid F/W already has fixed the issue and being under process of release. Meanwhile, driver will protect the system with this patch. Signed-Off By: Seokmann Ju Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid | 7 +++++++ drivers/scsi/megaraid/mega_common.h | 3 +++ drivers/scsi/megaraid/megaraid_mbox.c | 8 ++++++++ 3 files changed, 18 insertions(+) diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index fd8939e0045d..0edb048b2ea4 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -59,6 +59,13 @@ Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) > Buffer I/O error on device sda6, logical block 522067228 > attempt to access beyond end of device +2. When INQUIRY with EVPD bit set issued to the MegaRAID controller, + system memory gets corrupted. + Root Cause: MegaRAID F/W handle the INQUIRY with EVPD bit set + incorrectly. + Fix: MegaRAID F/W has fixed the problem and being process of release, + soon. Meanwhile, driver will filter out the request. + Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module) diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h index 12e38125b123..8cd0bd1d0f7c 100644 --- a/drivers/scsi/megaraid/mega_common.h +++ b/drivers/scsi/megaraid/mega_common.h @@ -40,6 +40,9 @@ #define HBA_SIGNATURE_64_BIT 0x299 #define PCI_CONF_AMISIG64 0xa4 +#define MEGA_SCSI_INQ_EVPD 1 +#define MEGA_INVALID_FIELD_IN_CDB 0x24 + /** * scb_t - scsi command control block diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index e671af0b4f58..cd982c877da0 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -1644,6 +1644,14 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) rdev->last_disp |= (1L << SCP2CHANNEL(scp)); } + if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) { + scp->sense_buffer[0] = 0x70; + scp->sense_buffer[2] = ILLEGAL_REQUEST; + scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB; + scp->result = CHECK_CONDITION << 1; + return NULL; + } + /* Fall through */ case READ_CAPACITY: -- cgit v1.2.2 From 0b4972d59170e13ab0236e8a7148112052590c01 Mon Sep 17 00:00:00 2001 From: "Ju, Seokmann" Date: Tue, 25 Jul 2006 08:45:06 -0600 Subject: [SCSI] megaraid_{mm,mbox}: a fix on "kernel unaligned access address" issue There was an issue in the data structure defined by megaraid driver casuing "kernel unaligned access.." messages to be displayed during IOCTL on IA64 platform. The issue has been reported/fixed by Sakurai Hiroomi [sakurai_hiro@soft.fujitsu.com]. Signed-Off By: Seokmann Ju Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid | 55 ++++++++++++++++++++++++++++++++++ drivers/scsi/megaraid/megaraid_ioctl.h | 4 +++ drivers/scsi/megaraid/megaraid_mm.c | 2 +- drivers/scsi/megaraid/megaraid_mm.h | 4 +-- 4 files changed, 62 insertions(+), 3 deletions(-) diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index 0edb048b2ea4..a056bbe67c7e 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -66,6 +66,61 @@ Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Fix: MegaRAID F/W has fixed the problem and being process of release, soon. Meanwhile, driver will filter out the request. +3. One of member in the data structure of the driver leads unaligne + issue on 64-bit platform. + Customer reporeted "kernel unaligned access addrss" issue when + application communicates with MegaRAID HBA driver. + Root Cause: in uioc_t structure, one of member had misaligned and it + led system to display the error message. + Fix: A patch submitted to community from following folk. + + > -----Original Message----- + > From: linux-scsi-owner@vger.kernel.org + > [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Sakurai Hiroomi + > Sent: Wednesday, July 12, 2006 4:20 AM + > To: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org + > Subject: Re: Help: strange messages from kernel on IA64 platform + > + > Hi, + > + > I saw same message. + > + > When GAM(Global Array Manager) is started, The following + > message output. + > kernel: kernel unaligned access to 0xe0000001fe1080d4, + > ip=0xa000000200053371 + > + > The uioc structure used by ioctl is defined by packed, + > the allignment of each member are disturbed. + > In a 64 bit structure, the allignment of member doesn't fit 64 bit + > boundary. this causes this messages. + > In a 32 bit structure, we don't see the message because the allinment + > of member fit 32 bit boundary even if packed is specified. + > + > patch + > I Add 32 bit dummy member to fit 64 bit boundary. I tested. + > We confirmed this patch fix the problem by IA64 server. + > + > ************************************************************** + > **************** + > --- linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h.orig + > 2006-04-03 17:13:03.000000000 +0900 + > +++ linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h + > 2006-04-03 17:14:09.000000000 +0900 + > @@ -132,6 +132,10 @@ + > /* Driver Data: */ + > void __user * user_data; + > uint32_t user_data_len; + > + + > + /* 64bit alignment */ + > + uint32_t pad_0xBC; + > + + > mraid_passthru_t __user *user_pthru; + > + > mraid_passthru_t *pthru32; + > ************************************************************** + > **************** + Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module) diff --git a/drivers/scsi/megaraid/megaraid_ioctl.h b/drivers/scsi/megaraid/megaraid_ioctl.h index bdaee144a1c3..b8aa34202ec3 100644 --- a/drivers/scsi/megaraid/megaraid_ioctl.h +++ b/drivers/scsi/megaraid/megaraid_ioctl.h @@ -132,6 +132,10 @@ typedef struct uioc { /* Driver Data: */ void __user * user_data; uint32_t user_data_len; + + /* 64bit alignment */ + uint32_t pad_for_64bit_align; + mraid_passthru_t __user *user_pthru; mraid_passthru_t *pthru32; diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index e8f534fb336b..d85b9a8f1b8d 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mm.c - * Version : v2.20.2.6 (Mar 7 2005) + * Version : v2.20.2.7 (Jul 16 2006) * * Common management module */ diff --git a/drivers/scsi/megaraid/megaraid_mm.h b/drivers/scsi/megaraid/megaraid_mm.h index 3d9e67d6849d..c8762b2b8ed1 100644 --- a/drivers/scsi/megaraid/megaraid_mm.h +++ b/drivers/scsi/megaraid/megaraid_mm.h @@ -27,9 +27,9 @@ #include "megaraid_ioctl.h" -#define LSI_COMMON_MOD_VERSION "2.20.2.6" +#define LSI_COMMON_MOD_VERSION "2.20.2.7" #define LSI_COMMON_MOD_EXT_VERSION \ - "(Release Date: Mon Mar 7 00:01:03 EST 2005)" + "(Release Date: Sun Jul 16 00:01:03 EST 2006)" #define LSI_DBGLVL dbglevel -- cgit v1.2.2 From 0dfda7751e969902f7231fc547ca8c9e0fb9ee13 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 28 Jul 2006 09:01:36 +0200 Subject: [SCSI] fix simscsi On Thu, Jul 27, 2006 at 01:03:24AM -0700, Andrew Morton wrote: > arch/ia64/hp/sim/simscsi.c: In function `simscsi_sg_readwrite': > arch/ia64/hp/sim/simscsi.c:154: error: structure has no member named `buffer' > arch/ia64/hp/sim/simscsi.c: In function `simscsi_fillresult': > arch/ia64/hp/sim/simscsi.c:247: error: structure has no member named `buffer' > arch/ia64/hp/sim/simscsi.c: At top level: > arch/ia64/hp/sim/simscsi.c:87: warning: 'simscsi_setup' defined but not used Signed-off-by: James Bottomley --- arch/ia64/hp/sim/simscsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c index a3fe97531134..8f0a16a79a67 100644 --- a/arch/ia64/hp/sim/simscsi.c +++ b/arch/ia64/hp/sim/simscsi.c @@ -151,7 +151,7 @@ static void simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset) { int list_len = sc->use_sg; - struct scatterlist *sl = (struct scatterlist *)sc->buffer; + struct scatterlist *sl = (struct scatterlist *)sc->request_buffer; struct disk_stat stat; struct disk_req req; @@ -244,7 +244,8 @@ static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len) if (scatterlen == 0) memcpy(sc->request_buffer, buf, len); - else for (slp = (struct scatterlist *)sc->buffer; scatterlen-- > 0 && len > 0; slp++) { + else for (slp = (struct scatterlist *)sc->request_buffer; + scatterlen-- > 0 && len > 0; slp++) { unsigned thislen = min(len, slp->length); memcpy(page_address(slp->page) + slp->offset, buf, thislen); -- cgit v1.2.2 From 64ba88182962698a8cb75792372c1dddaef82989 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 2 Aug 2006 15:24:34 -0400 Subject: [SCSI] lpfc 8.1.7 : Add statistics reset callback for FC transport Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 90 +++++++++++++++++++++++++++++++++++++++++-- drivers/scsi/lpfc/lpfc_sli.c | 3 ++ drivers/scsi/lpfc/lpfc_sli.h | 14 +++++++ 3 files changed, 103 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5c68cdd8736f..762d623018f3 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1210,8 +1210,10 @@ lpfc_get_stats(struct Scsi_Host *shost) struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata; struct lpfc_sli *psli = &phba->sli; struct fc_host_statistics *hs = &phba->link_stats; + struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets; LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; + unsigned long seconds; int rc = 0; pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); @@ -1272,22 +1274,103 @@ lpfc_get_stats(struct Scsi_Host *shost) hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt; hs->error_frames = pmb->un.varRdLnk.crcCnt; + hs->link_failure_count -= lso->link_failure_count; + hs->loss_of_sync_count -= lso->loss_of_sync_count; + hs->loss_of_signal_count -= lso->loss_of_signal_count; + hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count; + hs->invalid_tx_word_count -= lso->invalid_tx_word_count; + hs->invalid_crc_count -= lso->invalid_crc_count; + hs->error_frames -= lso->error_frames; + if (phba->fc_topology == TOPOLOGY_LOOP) { hs->lip_count = (phba->fc_eventTag >> 1); + hs->lip_count -= lso->link_events; hs->nos_count = -1; } else { hs->lip_count = -1; hs->nos_count = (phba->fc_eventTag >> 1); + hs->nos_count -= lso->link_events; } hs->dumped_frames = -1; -/* FIX ME */ - /*hs->SecondsSinceLastReset = (jiffies - lpfc_loadtime) / HZ;*/ + seconds = get_seconds(); + if (seconds < psli->stats_start) + hs->seconds_since_last_reset = seconds + + ((unsigned long)-1 - psli->stats_start); + else + hs->seconds_since_last_reset = seconds - psli->stats_start; return hs; } +static void +lpfc_reset_stats(struct Scsi_Host *shost) +{ + struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets; + LPFC_MBOXQ_t *pmboxq; + MAILBOX_t *pmb; + int rc = 0; + + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) + return; + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + + pmb = &pmboxq->mb; + pmb->mbxCommand = MBX_READ_STATUS; + pmb->mbxOwner = OWN_HOST; + pmb->un.varWords[0] = 0x1; /* reset request */ + pmboxq->context1 = NULL; + + if ((phba->fc_flag & FC_OFFLINE_MODE) || + (!(psli->sli_flag & LPFC_SLI2_ACTIVE))) + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); + else + rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + + if (rc != MBX_SUCCESS) { + if (rc == MBX_TIMEOUT) + pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + else + mempool_free(pmboxq, phba->mbox_mem_pool); + return; + } + + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + pmb->mbxCommand = MBX_READ_LNK_STAT; + pmb->mbxOwner = OWN_HOST; + pmboxq->context1 = NULL; + + if ((phba->fc_flag & FC_OFFLINE_MODE) || + (!(psli->sli_flag & LPFC_SLI2_ACTIVE))) + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); + else + rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + + if (rc != MBX_SUCCESS) { + if (rc == MBX_TIMEOUT) + pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + else + mempool_free( pmboxq, phba->mbox_mem_pool); + return; + } + + lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt; + lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt; + lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt; + lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt; + lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord; + lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt; + lso->error_frames = pmb->un.varRdLnk.crcCnt; + lso->link_events = (phba->fc_eventTag >> 1); + + psli->stats_start = get_seconds(); + + return; +} /* * The LPFC driver treats linkdown handling as target loss events so there @@ -1431,8 +1514,7 @@ struct fc_function_template lpfc_transport_functions = { */ .get_fc_host_stats = lpfc_get_stats, - - /* the LPFC driver doesn't support resetting stats yet */ + .reset_fc_host_stats = lpfc_reset_stats, .dd_fcrport_size = sizeof(struct lpfc_rport_data), .show_rport_maxframe_size = 1, diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 350a625fa224..f453fccd67c8 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1792,6 +1792,9 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba) spin_unlock_irq(phba->host->host_lock); + memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets)); + psli->stats_start = get_seconds(); + if (skip_post) mdelay(100); else diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index d8ef0d2894d4..478e799c2bbf 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -172,6 +172,18 @@ struct lpfc_sli_stat { uint32_t mbox_busy; /* Mailbox cmd busy */ }; +/* Structure to store link status values when port stats are reset */ +struct lpfc_lnk_stat { + uint32_t link_failure_count; + uint32_t loss_of_sync_count; + uint32_t loss_of_signal_count; + uint32_t prim_seq_protocol_err_count; + uint32_t invalid_tx_word_count; + uint32_t invalid_crc_count; + uint32_t error_frames; + uint32_t link_events; +}; + /* Structure used to hold SLI information */ struct lpfc_sli { uint32_t num_rings; @@ -201,6 +213,8 @@ struct lpfc_sli { struct lpfc_iocbq ** iocbq_lookup; /* array to lookup IOCB by IOTAG */ size_t iocbq_lookup_len; /* current lengs of the array */ uint16_t last_iotag; /* last allocated IOTAG */ + unsigned long stats_start; /* in seconds */ + struct lpfc_lnk_stat lnk_stat_offsets; }; /* Given a pointer to the start of the ring, and the slot number of -- cgit v1.2.2 From a309a6b6e64b8147b7cfe7388237fb83834f58c9 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:33:43 -0400 Subject: [SCSI] lpfc 8.1.7 : Fix failing firmware download due to mailbox delays needing to be longer Fix failing firmware download due to mailbox delays needing to be longer. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 3 ++- drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_mbox.c | 16 ++++++++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 11 +++++++---- drivers/scsi/lpfc/lpfc_sli.h | 6 ++++++ 5 files changed, 32 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 762d623018f3..4ccce1474f2d 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1000,7 +1000,8 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count) spin_unlock_irq(phba->host->host_lock); rc = lpfc_sli_issue_mbox_wait (phba, phba->sysfs_mbox.mbox, - phba->fc_ratov * 2); + lpfc_mbox_tmo_val(phba, + phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ); spin_lock_irq(phba->host->host_lock); } diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 517e9e4dd461..2a176467f71b 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -127,6 +127,7 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *); LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *); +int lpfc_mbox_tmo_val(struct lpfc_hba *, int); int lpfc_mem_alloc(struct lpfc_hba *); void lpfc_mem_free(struct lpfc_hba *); diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index e42f22aaf71b..4d016c2a1b26 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -651,3 +651,19 @@ lpfc_mbox_get(struct lpfc_hba * phba) return mbq; } + +int +lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd) +{ + switch (cmd) { + case MBX_WRITE_NV: /* 0x03 */ + case MBX_UPDATE_CFG: /* 0x1B */ + case MBX_DOWN_LOAD: /* 0x1C */ + case MBX_DEL_LD_ENTRY: /* 0x1D */ + case MBX_LOAD_AREA: /* 0x81 */ + case MBX_FLASH_WR_ULA: /* 0x98 */ + case MBX_LOAD_EXP_ROM: /* 0x9C */ + return LPFC_MBOX_TMO_FLASH_CMD; + } + return LPFC_MBOX_TMO; +} diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index f453fccd67c8..4dc2d584319e 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2197,7 +2197,8 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) return (MBX_NOT_FINISHED); } /* timeout active mbox command */ - mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO); + mod_timer(&psli->mbox_tmo, (jiffies + + (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand)))); } /* Mailbox cmd issue */ @@ -2257,7 +2258,6 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) break; case MBX_POLL: - i = 0; psli->mbox_active = NULL; if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First read mbox status word */ @@ -2271,11 +2271,14 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) /* Read the HBA Host Attention Register */ ha_copy = readl(phba->HAregaddr); + i = lpfc_mbox_tmo_val(phba, mb->mbxCommand); + i *= 1000; /* Convert to ms */ + /* Wait for command to complete */ while (((word0 & OWN_CHIP) == OWN_CHIP) || (!(ha_copy & HA_MBATT) && (phba->hba_state > LPFC_WARM_START))) { - if (i++ >= 100) { + if (i-- <= 0) { psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; spin_unlock_irqrestore(phba->host->host_lock, drvr_flag); @@ -2293,7 +2296,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) /* Can be in interrupt context, do not sleep */ /* (or might be called with interrupts disabled) */ - mdelay(i); + mdelay(1); spin_lock_irqsave(phba->host->host_lock, drvr_flag); diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 478e799c2bbf..e26de6809358 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -225,3 +225,9 @@ struct lpfc_sli { #define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox command */ +#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write + * or erase cmds. This is especially + * long because of the potential of + * multiple flash erases that can be + * spawned. + */ -- cgit v1.2.2 From 1c067a42413c4f39c907443b8f5979cd4d82f0ff Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:33:52 -0400 Subject: [SCSI] lpfc 8.1.7 : Fix race condition between lpfc_sli_issue_mbox and lpfc_online Fix race condition between lpfc_sli_issue_mbox and lpfc_online Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_sli.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 4dc2d584319e..fbf108c9625c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1711,15 +1711,13 @@ lpfc_sli_brdreset(struct lpfc_hba * phba) phba->fc_myDID = 0; phba->fc_prevDID = 0; - psli->sli_flag = 0; - /* Turn off parity checking and serr during the physical reset */ pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value); pci_write_config_word(phba->pcidev, PCI_COMMAND, (cfg_value & ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR))); - psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA); /* Now toggle INITFF bit in the Host Control Register */ writel(HC_INITFF, phba->HCregaddr); mdelay(1); @@ -1905,6 +1903,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba) } while (resetcount < 2 && !done) { + spin_lock_irq(phba->host->host_lock); + phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE; + spin_unlock_irq(phba->host->host_lock); phba->hba_state = LPFC_STATE_UNKNOWN; lpfc_sli_brdrestart(phba); msleep(2500); @@ -1912,6 +1913,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba) if (rc) break; + spin_lock_irq(phba->host->host_lock); + phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; + spin_unlock_irq(phba->host->host_lock); resetcount++; /* Call pre CONFIG_PORT mailbox command initialization. A value of 0 -- cgit v1.2.2 From 8f6d98d2e05c38cb08fbda5e38e5f87d361c3cac Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:34:00 -0400 Subject: [SCSI] lpfc 8.1.7 : Short bug fixes Short bug fixes: - Fix iocbq list corruption due to missing list_del's in ct handling - Missing unlock in lpfc_sli_next_iotag() - Fix initialization of can_queue value - Differentiate sysfs mailbox errors with different codes. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 6 +++--- drivers/scsi/lpfc/lpfc_ct.c | 1 + drivers/scsi/lpfc/lpfc_init.c | 12 +++++++++++- drivers/scsi/lpfc/lpfc_sli.c | 5 +++-- 4 files changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 4ccce1474f2d..76f8bd53e230 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -884,7 +884,7 @@ sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count) phba->sysfs_mbox.mbox == NULL ) { sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -EINVAL; + return -EAGAIN; } } @@ -1008,7 +1008,7 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count) if (rc != MBX_SUCCESS) { sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -ENODEV; + return (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV; } phba->sysfs_mbox.state = SMBOX_READING; } @@ -1017,7 +1017,7 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count) printk(KERN_WARNING "mbox_read: Bad State\n"); sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -EINVAL; + return -EAGAIN; } memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index b65ee57af53e..cab2d9dec088 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -131,6 +131,7 @@ lpfc_ct_unsol_event(struct lpfc_hba * phba, } ct_unsol_event_exit_piocbq: + list_del(&head); if (pmbuf) { list_for_each_entry_safe(matp, next_matp, &pmbuf->list, list) { lpfc_mbuf_free(phba, matp->virt, matp->phys); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index ef47b824cbed..16dc8c82b5ce 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1616,7 +1616,11 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_iocbq; } - /* We can rely on a queue depth attribute only after SLI HBA setup */ + /* + * Set initial can_queue value since 0 is no longer supported and + * scsi_add_host will fail. This will be adjusted later based on the + * max xri value determined in hba setup. + */ host->can_queue = phba->cfg_hba_queue_depth - 10; /* Tell the midlayer we support 16 byte commands */ @@ -1656,6 +1660,12 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_irq; } + /* + * hba setup may have changed the hba_queue_depth so we need to adjust + * the value of can_queue. + */ + host->can_queue = phba->cfg_hba_queue_depth - 10; + lpfc_discovery_wait(phba); if (phba->cfg_poll & DISABLE_FCP_RING_INT) { diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index fbf108c9625c..9802ee848f1d 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -320,7 +320,8 @@ lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq) kfree(old_arr); return iotag; } - } + } else + spin_unlock_irq(phba->host->host_lock); lpfc_printf_log(phba, KERN_ERR,LOG_SLI, "%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n", @@ -1399,11 +1400,11 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, next_iocb, &saveq->list, list) { + list_del(&rspiocbp->list); lpfc_sli_release_iocbq(phba, rspiocbp); } } - lpfc_sli_release_iocbq(phba, saveq); } } -- cgit v1.2.2 From dca9479be891eac33e53ab37769e18c3259646da Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:34:08 -0400 Subject: [SCSI] lpfc 8.1.7 : ID String and Message fixes ID String and Message fixes - Fix switch symbolic name registration to match cross-OS values - Replace printk's with more standard lpfc_printf_log calls - Make all lpfc_printf_log message numbers unique Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_ct.c | 12 ++++-------- drivers/scsi/lpfc/lpfc_els.c | 6 +++--- drivers/scsi/lpfc/lpfc_hbadisc.c | 12 ++++++------ drivers/scsi/lpfc/lpfc_nportdisc.c | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 28 ++++++++++++++++------------ 6 files changed, 31 insertions(+), 31 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index cab2d9dec088..bbb7310210b0 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -482,7 +482,7 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, if (CTrsp->CommandResponse.bits.CmdRsp == be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) { lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY, - "%d:0239 NameServer Rsp " + "%d:0208 NameServer Rsp " "Data: x%x\n", phba->brd_no, phba->fc_flag); @@ -589,13 +589,9 @@ lpfc_get_hba_sym_node_name(struct lpfc_hba * phba, uint8_t * symbp) lpfc_decode_firmware_rev(phba, fwrev, 0); - if (phba->Port[0]) { - sprintf(symbp, "Emulex %s Port %s FV%s DV%s", phba->ModelName, - phba->Port, fwrev, lpfc_release_version); - } else { - sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName, - fwrev, lpfc_release_version); - } + sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName, + fwrev, lpfc_release_version); + return; } /* diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index b89f6cb641e6..60f5cca0abe9 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -2839,7 +2839,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) /* Xmit ELS RPS ACC response tag */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "%d:0128 Xmit ELS RPS ACC response tag x%x " + "%d:0118 Xmit ELS RPS ACC response tag x%x " "Data: x%x x%x x%x x%x x%x\n", phba->brd_no, elsiocb->iocb.ulpIoTag, @@ -2948,7 +2948,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_hba * phba, uint16_t cmdsize, /* Xmit ELS RPL ACC response tag */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "%d:0128 Xmit ELS RPL ACC response tag x%x " + "%d:0120 Xmit ELS RPL ACC response tag x%x " "Data: x%x x%x x%x x%x x%x\n", phba->brd_no, elsiocb->iocb.ulpIoTag, @@ -3109,7 +3109,7 @@ lpfc_els_rcv_fan(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, struct lpfc_nodelist *ndlp, *next_ndlp; /* FAN received */ - lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:265 FAN received\n", + lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:0265 FAN received\n", phba->brd_no); icmd = &cmdiocb->iocb; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 4d6cf990c4fc..1c3f2689155b 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1782,7 +1782,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to REGLOGIN */ /* FIND node DID reglogin */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID reglogin" + "%d:0901 FIND node DID reglogin" " Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1805,7 +1805,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to PRLI */ /* FIND node DID prli */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID prli " + "%d:0902 FIND node DID prli " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1828,7 +1828,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to NPR */ /* FIND node DID npr */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID npr " + "%d:0903 FIND node DID npr " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1851,7 +1851,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to UNUSED */ /* FIND node DID unused */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID unused " + "%d:0905 FIND node DID unused " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -2335,7 +2335,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba) initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!initlinkmbox) { lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, - "%d:0226 Device Discovery " + "%d:0206 Device Discovery " "completion error\n", phba->brd_no); phba->hba_state = LPFC_HBA_ERROR; @@ -2365,7 +2365,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba) if (!clearlambox) { clrlaerr = 1; lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, - "%d:0226 Device Discovery " + "%d:0207 Device Discovery " "completion error\n", phba->brd_no); phba->hba_state = LPFC_HBA_ERROR; diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index bd0b0e293d63..b38021a32c96 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -179,7 +179,7 @@ lpfc_els_abort(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, /* Abort outstanding I/O on NPort */ lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY, - "%d:0201 Abort outstanding I/O on NPort x%x " + "%d:0205 Abort outstanding I/O on NPort x%x " "Data: x%x x%x x%x\n", phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state, ndlp->nlp_rpi); diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index a760a44173df..0811c824e0e0 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1104,7 +1104,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) ndlp->rport->dd_data); if (ret != SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "%d:0713 Bus Reset on target %d failed\n", + "%d:0700 Bus Reset on target %d failed\n", phba->brd_no, i); err_count++; } diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 9802ee848f1d..70f4d5a1348e 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -970,9 +970,11 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba) * resources need to be recovered. */ if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) { - printk(KERN_INFO "%s: IOCB cmd 0x%x processed." - " Skipping completion\n", __FUNCTION__, - irsp->ulpCommand); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "%d:0314 IOCB cmd 0x%x" + " processed. Skipping" + " completion", phba->brd_no, + irsp->ulpCommand); break; } @@ -1105,7 +1107,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, if (unlikely(irsp->ulpStatus)) { /* Rsp ring error: IOCB */ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, - "%d:0326 Rsp Ring %d error: IOCB Data: " + "%d:0336 Rsp Ring %d error: IOCB Data: " "x%x x%x x%x x%x x%x x%x x%x x%x\n", phba->brd_no, pring->ringno, irsp->un.ulpWord[0], irsp->un.ulpWord[1], @@ -1123,9 +1125,11 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, * resources need to be recovered. */ if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) { - printk(KERN_INFO "%s: IOCB cmd 0x%x processed. " - "Skipping completion\n", __FUNCTION__, - irsp->ulpCommand); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "%d:0333 IOCB cmd 0x%x" + " processed. Skipping" + " completion\n", phba->brd_no, + irsp->ulpCommand); break; } @@ -1156,7 +1160,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, } else { /* Unknown IOCB command */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0321 Unknown IOCB command " + "%d:0334 Unknown IOCB command " "Data: x%x, x%x x%x x%x x%x\n", phba->brd_no, type, irsp->ulpCommand, irsp->ulpStatus, irsp->ulpIoTag, @@ -1239,7 +1243,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0312 Ring %d handler: portRspPut %d " + "%d:0303 Ring %d handler: portRspPut %d " "is bigger then rsp ring %d\n", phba->brd_no, pring->ringno, portRspPut, portRspMax); @@ -1384,7 +1388,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0321 Unknown IOCB command " + "%d:0335 Unknown IOCB command " "Data: x%x x%x x%x x%x\n", phba->brd_no, irsp->ulpCommand, @@ -1759,7 +1763,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba) /* Restart HBA */ lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "%d:0328 Restart HBA Data: x%x x%x\n", phba->brd_no, + "%d:0337 Restart HBA Data: x%x x%x\n", phba->brd_no, phba->hba_state, psli->sli_flag); word0 = 0; @@ -3016,7 +3020,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba, if (timeleft == 0) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0329 IOCB wait timeout error - no " + "%d:0338 IOCB wait timeout error - no " "wake response Data x%x\n", phba->brd_no, timeout); retval = IOCB_TIMEDOUT; -- cgit v1.2.2 From 416780d3a7836a99568c6728830ced592a7a22e3 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:34:16 -0400 Subject: [SCSI] lpfc 8.1.7 : Change version number to 8.1.8 Change version number to 8.1.8 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 10e89c6ae823..c7963f91d0a7 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.1.7" +#define LPFC_DRIVER_VERSION "8.1.8" #define LPFC_DRIVER_NAME "lpfc" -- cgit v1.2.2 From b797b6de9d4d8d085169a507c54b18e74dbe4f21 Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Tue, 1 Aug 2006 13:48:13 -0700 Subject: [SCSI] qla2xxx: Correct endianess problem while issuing a Marker IOCB on ISP24xx. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_iocb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 2b60a27eff0b..c5b3c610a32a 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -471,6 +471,7 @@ __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, mrk24->nport_handle = cpu_to_le16(loop_id); mrk24->lun[1] = LSB(lun); mrk24->lun[2] = MSB(lun); + host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun)); } else { SET_TARGET_ID(ha, mrk->target, loop_id); mrk->lun = cpu_to_le16(lun); -- cgit v1.2.2 From 45ebeb560570fd7ebae29a4105b81874063d5425 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 1 Aug 2006 13:48:14 -0700 Subject: [SCSI] qla2xxx: Log Trace/Diagonostic asynchronous events. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_isr.c | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 139ea0e27fd7..0930260aec2c 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -487,6 +487,7 @@ typedef struct { #define MBA_IP_RCV_BUFFER_EMPTY 0x8026 /* IP receive buffer queue empty. */ #define MBA_IP_HDR_DATA_SPLIT 0x8027 /* IP header/data splitting feature */ /* used. */ +#define MBA_TRACE_NOTIFICATION 0x8028 /* Trace/Diagnostic notification. */ #define MBA_POINT_TO_POINT 0x8030 /* Point to point mode. */ #define MBA_CMPLT_1_16BIT 0x8031 /* Completion 1 16bit IOSB. */ #define MBA_CMPLT_2_16BIT 0x8032 /* Completion 2 16bit IOSB. */ diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 795bf15b1b8f..de0613135f70 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -587,6 +587,11 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x " "%04x.\n", ha->host_no, mb[1], mb[2], mb[3])); break; + + case MBA_TRACE_NOTIFICATION: + DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n", + ha->host_no, mb[1], mb[2])); + break; } } -- cgit v1.2.2 From b0328beed0786b07d0102ed59cbf0b54ad8f726b Mon Sep 17 00:00:00 2001 From: Vladislav Bolkhovitin Date: Tue, 1 Aug 2006 13:48:15 -0700 Subject: [SCSI] qla2xxx: Fix to allow to reset devices using sg interface (sg_reset). Currently it is impossible to reset provided by Qlogic QLA2xxx driver SCSI devices externally using corresponding sg devices, particularly via sg_reset utility, because qla2xxx driver in qla2xxx_eh_device_reset() function checks if the input scsi_cmnd has its private data (CMD_SP()) attached. Then the found pointer isn't used anywhere inside of qla2xxx_eh_device_reset(). If the RESET request comes from sg device, it doesn't have such private data. The attached patch removes check for non-NULL CMD_SP() from qla2xxx_eh_device_reset(), hence allows to reset QLA2xxx's devices using corresponding sg devices. AV: change applies to bus/host reset handlers as well. Signed-off-by: Vladislav Bolkhovitin Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index ec7ebb6037e6..1e2b95bac830 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -744,7 +744,6 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -755,8 +754,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, @@ -875,7 +873,6 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -886,8 +883,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, @@ -936,7 +932,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -947,8 +942,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, -- cgit v1.2.2 From c2602c48b5ebde55b418ba252737bf60caa4bab0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 1 Aug 2006 13:48:16 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.01.05-k4. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index d2d683440659..f5826bf04a24 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.01.05-k3" +#define QLA2XXX_VERSION "8.01.05-k4" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 1 -- cgit v1.2.2 From fea9d6c7bcd8ff1d60ff74f27ba483b3820b18a3 Mon Sep 17 00:00:00 2001 From: Volker Sameske Date: Wed, 2 Aug 2006 11:05:16 +0200 Subject: [SCSI] zfcp: improve management of request IDs Improve request handling. Use hash table to manage request IDs. Signed-off-by: Volker Sameske Signed-off-by: Andreas Herrmann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_aux.c | 120 +++++++++++++++++++++++++++++++++++++---- drivers/s390/scsi/zfcp_ccw.c | 5 ++ drivers/s390/scsi/zfcp_def.h | 11 ++-- drivers/s390/scsi/zfcp_erp.c | 16 +++--- drivers/s390/scsi/zfcp_ext.h | 6 ++- drivers/s390/scsi/zfcp_fsf.c | 122 ++++++++++++++++++++++-------------------- drivers/s390/scsi/zfcp_qdio.c | 79 +++++++++++---------------- 7 files changed, 231 insertions(+), 128 deletions(-) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 9cd789b8acd4..adc9d8f2c28f 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -112,6 +112,105 @@ _zfcp_hex_dump(char *addr, int count) printk("\n"); } + +/****************************************************************/ +/****** Functions to handle the request ID hash table ********/ +/****************************************************************/ + +#define ZFCP_LOG_AREA ZFCP_LOG_AREA_FSF + +static int zfcp_reqlist_init(struct zfcp_adapter *adapter) +{ + int i; + + adapter->req_list = kcalloc(REQUEST_LIST_SIZE, sizeof(struct list_head), + GFP_KERNEL); + + if (!adapter->req_list) + return -ENOMEM; + + for (i=0; ireq_list[i]); + + return 0; +} + +static void zfcp_reqlist_free(struct zfcp_adapter *adapter) +{ + struct zfcp_fsf_req *request, *tmp; + unsigned int i; + + for (i=0; ireq_list[i])) + continue; + + list_for_each_entry_safe(request, tmp, + &adapter->req_list[i], list) + list_del(&request->list); + } + + kfree(adapter->req_list); +} + +void zfcp_reqlist_add(struct zfcp_adapter *adapter, + struct zfcp_fsf_req *fsf_req) +{ + unsigned int i; + + i = fsf_req->req_id % REQUEST_LIST_SIZE; + list_add_tail(&fsf_req->list, &adapter->req_list[i]); +} + +void zfcp_reqlist_remove(struct zfcp_adapter *adapter, unsigned long req_id) +{ + struct zfcp_fsf_req *request, *tmp; + unsigned int i, counter; + u64 dbg_tmp[2]; + + i = req_id % REQUEST_LIST_SIZE; + BUG_ON(list_empty(&adapter->req_list[i])); + + counter = 0; + list_for_each_entry_safe(request, tmp, &adapter->req_list[i], list) { + if (request->req_id == req_id) { + dbg_tmp[0] = (u64) atomic_read(&adapter->reqs_active); + dbg_tmp[1] = (u64) counter; + debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16); + list_del(&request->list); + break; + } + counter++; + } +} + +struct zfcp_fsf_req *zfcp_reqlist_ismember(struct zfcp_adapter *adapter, + unsigned long req_id) +{ + struct zfcp_fsf_req *request, *tmp; + unsigned int i; + + i = req_id % REQUEST_LIST_SIZE; + + list_for_each_entry_safe(request, tmp, &adapter->req_list[i], list) + if (request->req_id == req_id) + return request; + + return NULL; +} + +int zfcp_reqlist_isempty(struct zfcp_adapter *adapter) +{ + unsigned int i; + + for (i=0; ireq_list[i])) + return 0; + + return 1; +} + +#undef ZFCP_LOG_AREA + /****************************************************************/ /************** Uncategorised Functions *************************/ /****************************************************************/ @@ -961,8 +1060,12 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device) INIT_LIST_HEAD(&adapter->port_remove_lh); /* initialize list of fsf requests */ - spin_lock_init(&adapter->fsf_req_list_lock); - INIT_LIST_HEAD(&adapter->fsf_req_list_head); + spin_lock_init(&adapter->req_list_lock); + retval = zfcp_reqlist_init(adapter); + if (retval) { + ZFCP_LOG_INFO("request list initialization failed\n"); + goto failed_low_mem_buffers; + } /* initialize debug locks */ @@ -1041,8 +1144,6 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device) * !0 - struct zfcp_adapter data structure could not be removed * (e.g. still used) * locks: adapter list write lock is assumed to be held by caller - * adapter->fsf_req_list_lock is taken and released within this - * function and must not be held on entry */ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter) @@ -1054,14 +1155,14 @@ zfcp_adapter_dequeue(struct zfcp_adapter *adapter) zfcp_sysfs_adapter_remove_files(&adapter->ccw_device->dev); dev_set_drvdata(&adapter->ccw_device->dev, NULL); /* sanity check: no pending FSF requests */ - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - retval = !list_empty(&adapter->fsf_req_list_head); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - if (retval) { + spin_lock_irqsave(&adapter->req_list_lock, flags); + retval = zfcp_reqlist_isempty(adapter); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); + if (!retval) { ZFCP_LOG_NORMAL("bug: adapter %s (%p) still in use, " "%i requests outstanding\n", zfcp_get_busid_by_adapter(adapter), adapter, - atomic_read(&adapter->fsf_reqs_active)); + atomic_read(&adapter->reqs_active)); retval = -EBUSY; goto out; } @@ -1087,6 +1188,7 @@ zfcp_adapter_dequeue(struct zfcp_adapter *adapter) zfcp_free_low_mem_buffers(adapter); /* free memory of adapter data structure and queues */ zfcp_qdio_free_queues(adapter); + zfcp_reqlist_free(adapter); kfree(adapter->fc_stats); kfree(adapter->stats_reset_data); ZFCP_LOG_TRACE("freeing adapter structure\n"); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 57d8e4bfb8d9..fdabadeaa9ee 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -164,6 +164,11 @@ zfcp_ccw_set_online(struct ccw_device *ccw_device) retval = zfcp_adapter_scsi_register(adapter); if (retval) goto out_scsi_register; + + /* initialize request counter */ + BUG_ON(!zfcp_reqlist_isempty(adapter)); + adapter->req_no = 0; + zfcp_erp_modify_adapter_status(adapter, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 2df512a18e2c..72293f3870b5 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -886,11 +886,11 @@ struct zfcp_adapter { struct list_head port_remove_lh; /* head of ports to be removed */ u32 ports; /* number of remote ports */ - struct timer_list scsi_er_timer; /* SCSI err recovery watch */ - struct list_head fsf_req_list_head; /* head of FSF req list */ - spinlock_t fsf_req_list_lock; /* lock for ops on list of - FSF requests */ - atomic_t fsf_reqs_active; /* # active FSF reqs */ + struct timer_list scsi_er_timer; /* SCSI err recovery watch */ + atomic_t reqs_active; /* # active FSF reqs */ + unsigned long req_no; /* unique FSF req number */ + struct list_head *req_list; /* list of pending reqs */ + spinlock_t req_list_lock; /* request list lock */ struct zfcp_qdio_queue request_queue; /* request queue */ u32 fsf_req_seq_no; /* FSF cmnd seq number */ wait_queue_head_t request_wq; /* can be used to wait for @@ -986,6 +986,7 @@ struct zfcp_unit { /* FSF request */ struct zfcp_fsf_req { struct list_head list; /* list of FSF requests */ + unsigned long req_id; /* unique request ID */ struct zfcp_adapter *adapter; /* adapter request belongs to */ u8 sbal_number; /* nr of SBALs free for use */ u8 sbal_first; /* first SBAL for this request */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 8ec8da0beaa8..f74412bd9d6a 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -848,18 +848,16 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action) struct zfcp_adapter *adapter = erp_action->adapter; if (erp_action->fsf_req) { - /* take lock to ensure that request is not being deleted meanwhile */ - spin_lock(&adapter->fsf_req_list_lock); - /* check whether fsf req does still exist */ - list_for_each_entry(fsf_req, &adapter->fsf_req_list_head, list) - if (fsf_req == erp_action->fsf_req) - break; - if (fsf_req && (fsf_req->erp_action == erp_action)) { + /* take lock to ensure that request is not deleted meanwhile */ + spin_lock(&adapter->req_list_lock); + if ((!zfcp_reqlist_ismember(adapter, + erp_action->fsf_req->req_id)) && + (fsf_req->erp_action == erp_action)) { /* fsf_req still exists */ debug_text_event(adapter->erp_dbf, 3, "a_ca_req"); debug_event(adapter->erp_dbf, 3, &fsf_req, sizeof (unsigned long)); - /* dismiss fsf_req of timed out or dismissed erp_action */ + /* dismiss fsf_req of timed out/dismissed erp_action */ if (erp_action->status & (ZFCP_STATUS_ERP_DISMISSED | ZFCP_STATUS_ERP_TIMEDOUT)) { debug_text_event(adapter->erp_dbf, 3, @@ -892,7 +890,7 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action) */ erp_action->fsf_req = NULL; } - spin_unlock(&adapter->fsf_req_list_lock); + spin_unlock(&adapter->req_list_lock); } else debug_text_event(adapter->erp_dbf, 3, "a_ca_noreq"); diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index d02366004cdd..04bb3a9d90a8 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -63,7 +63,6 @@ extern int zfcp_qdio_allocate_queues(struct zfcp_adapter *); extern void zfcp_qdio_free_queues(struct zfcp_adapter *); extern int zfcp_qdio_determine_pci(struct zfcp_qdio_queue *, struct zfcp_fsf_req *); -extern int zfcp_qdio_reqid_check(struct zfcp_adapter *, void *); extern volatile struct qdio_buffer_element *zfcp_qdio_sbale_req (struct zfcp_fsf_req *, int, int); @@ -190,5 +189,10 @@ extern void zfcp_scsi_dbf_event_abort(const char *, struct zfcp_adapter *, struct zfcp_fsf_req *); extern void zfcp_scsi_dbf_event_devreset(const char *, u8, struct zfcp_unit *, struct scsi_cmnd *); +extern void zfcp_reqlist_add(struct zfcp_adapter *, struct zfcp_fsf_req *); +extern void zfcp_reqlist_remove(struct zfcp_adapter *, unsigned long); +extern struct zfcp_fsf_req *zfcp_reqlist_ismember(struct zfcp_adapter *, + unsigned long); +extern int zfcp_reqlist_isempty(struct zfcp_adapter *); #endif /* ZFCP_EXT_H */ diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 31db2b06faba..ff2eacf5ec8c 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -49,7 +49,6 @@ static int zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *); static void zfcp_fsf_link_down_info_eval(struct zfcp_adapter *, struct fsf_link_down_info *); static int zfcp_fsf_req_dispatch(struct zfcp_fsf_req *); -static void zfcp_fsf_req_dismiss(struct zfcp_fsf_req *); /* association between FSF command and FSF QTCB type */ static u32 fsf_qtcb_type[] = { @@ -146,47 +145,48 @@ zfcp_fsf_req_free(struct zfcp_fsf_req *fsf_req) kfree(fsf_req); } -/* - * function: - * - * purpose: - * - * returns: - * - * note: qdio queues shall be down (no ongoing inbound processing) +/** + * zfcp_fsf_req_dismiss - dismiss a single fsf request */ -int -zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter) +static void zfcp_fsf_req_dismiss(struct zfcp_adapter *adapter, + struct zfcp_fsf_req *fsf_req, + unsigned int counter) { - struct zfcp_fsf_req *fsf_req, *tmp; - unsigned long flags; - LIST_HEAD(remove_queue); + u64 dbg_tmp[2]; - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - list_splice_init(&adapter->fsf_req_list_head, &remove_queue); - atomic_set(&adapter->fsf_reqs_active, 0); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - - list_for_each_entry_safe(fsf_req, tmp, &remove_queue, list) { - list_del(&fsf_req->list); - zfcp_fsf_req_dismiss(fsf_req); - } - - return 0; + dbg_tmp[0] = (u64) atomic_read(&adapter->reqs_active); + dbg_tmp[1] = (u64) counter; + debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16); + list_del(&fsf_req->list); + fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; + zfcp_fsf_req_complete(fsf_req); } -/* - * function: - * - * purpose: - * - * returns: +/** + * zfcp_fsf_req_dismiss_all - dismiss all remaining fsf requests */ -static void -zfcp_fsf_req_dismiss(struct zfcp_fsf_req *fsf_req) +int zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter) { - fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; - zfcp_fsf_req_complete(fsf_req); + struct zfcp_fsf_req *request, *tmp; + unsigned long flags; + unsigned int i, counter; + + spin_lock_irqsave(&adapter->req_list_lock, flags); + atomic_set(&adapter->reqs_active, 0); + for (i=0; ireq_list[i])) + continue; + + counter = 0; + list_for_each_entry_safe(request, tmp, + &adapter->req_list[i], list) { + zfcp_fsf_req_dismiss(adapter, request, counter); + counter++; + } + } + spin_unlock_irqrestore(&adapter->req_list_lock, flags); + + return 0; } /* @@ -4592,12 +4592,14 @@ static inline void zfcp_fsf_req_qtcb_init(struct zfcp_fsf_req *fsf_req) { if (likely(fsf_req->qtcb != NULL)) { - fsf_req->qtcb->prefix.req_seq_no = fsf_req->adapter->fsf_req_seq_no; - fsf_req->qtcb->prefix.req_id = (unsigned long)fsf_req; + fsf_req->qtcb->prefix.req_seq_no = + fsf_req->adapter->fsf_req_seq_no; + fsf_req->qtcb->prefix.req_id = fsf_req->req_id; fsf_req->qtcb->prefix.ulp_info = ZFCP_ULP_INFO_VERSION; - fsf_req->qtcb->prefix.qtcb_type = fsf_qtcb_type[fsf_req->fsf_command]; + fsf_req->qtcb->prefix.qtcb_type = + fsf_qtcb_type[fsf_req->fsf_command]; fsf_req->qtcb->prefix.qtcb_version = ZFCP_QTCB_VERSION; - fsf_req->qtcb->header.req_handle = (unsigned long)fsf_req; + fsf_req->qtcb->header.req_handle = fsf_req->req_id; fsf_req->qtcb->header.fsf_command = fsf_req->fsf_command; } } @@ -4654,6 +4656,7 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, { volatile struct qdio_buffer_element *sbale; struct zfcp_fsf_req *fsf_req = NULL; + unsigned long flags; int ret = 0; struct zfcp_qdio_queue *req_queue = &adapter->request_queue; @@ -4668,6 +4671,12 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, fsf_req->adapter = adapter; fsf_req->fsf_command = fsf_cmd; + INIT_LIST_HEAD(&fsf_req->list); + + /* unique request id */ + spin_lock_irqsave(&adapter->req_list_lock, flags); + fsf_req->req_id = adapter->req_no++; + spin_unlock_irqrestore(&adapter->req_list_lock, flags); zfcp_fsf_req_qtcb_init(fsf_req); @@ -4707,7 +4716,7 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); /* setup common SBALE fields */ - sbale[0].addr = fsf_req; + sbale[0].addr = (void *) fsf_req->req_id; sbale[0].flags |= SBAL_FLAGS0_COMMAND; if (likely(fsf_req->qtcb != NULL)) { sbale[1].addr = (void *) fsf_req->qtcb; @@ -4747,7 +4756,7 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) volatile struct qdio_buffer_element *sbale; int inc_seq_no; int new_distance_from_int; - unsigned long flags; + u64 dbg_tmp[2]; int retval = 0; adapter = fsf_req->adapter; @@ -4761,10 +4770,10 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) sbale[1].addr, sbale[1].length); - /* put allocated FSF request at list tail */ - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - list_add_tail(&fsf_req->list, &adapter->fsf_req_list_head); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); + /* put allocated FSF request into hash table */ + spin_lock(&adapter->req_list_lock); + zfcp_reqlist_add(adapter, fsf_req); + spin_unlock(&adapter->req_list_lock); inc_seq_no = (fsf_req->qtcb != NULL); @@ -4803,6 +4812,10 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) QDIO_FLAG_SYNC_OUTPUT, 0, fsf_req->sbal_first, fsf_req->sbal_number, NULL); + dbg_tmp[0] = (unsigned long) sbale[0].addr; + dbg_tmp[1] = (u64) retval; + debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16); + if (unlikely(retval)) { /* Queues are down..... */ retval = -EIO; @@ -4812,22 +4825,17 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) */ if (timer) del_timer(timer); - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - list_del(&fsf_req->list); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - /* - * adjust the number of free SBALs in request queue as well as - * position of first one - */ + spin_lock(&adapter->req_list_lock); + zfcp_reqlist_remove(adapter, fsf_req->req_id); + spin_unlock(&adapter->req_list_lock); + /* undo changes in request queue made for this request */ zfcp_qdio_zero_sbals(req_queue->buffer, fsf_req->sbal_first, fsf_req->sbal_number); atomic_add(fsf_req->sbal_number, &req_queue->free_count); - req_queue->free_index -= fsf_req->sbal_number; /* increase */ + req_queue->free_index -= fsf_req->sbal_number; req_queue->free_index += QDIO_MAX_BUFFERS_PER_Q; req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ - ZFCP_LOG_DEBUG - ("error: do_QDIO failed. Buffers could not be enqueued " - "to request queue.\n"); + zfcp_erp_adapter_reopen(adapter, 0); } else { req_queue->distance_from_int = new_distance_from_int; /* @@ -4843,7 +4851,7 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) adapter->fsf_req_seq_no++; /* count FSF requests pending */ - atomic_inc(&adapter->fsf_reqs_active); + atomic_inc(&adapter->reqs_active); } return retval; } diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 49ea5add4abc..dbd9f48e863e 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -282,6 +282,37 @@ zfcp_qdio_request_handler(struct ccw_device *ccw_device, return; } +/** + * zfcp_qdio_reqid_check - checks for valid reqids or unsolicited status + */ +static int zfcp_qdio_reqid_check(struct zfcp_adapter *adapter, + unsigned long req_id) +{ + struct zfcp_fsf_req *fsf_req; + unsigned long flags; + + debug_long_event(adapter->erp_dbf, 4, req_id); + + spin_lock_irqsave(&adapter->req_list_lock, flags); + fsf_req = zfcp_reqlist_ismember(adapter, req_id); + + if (!fsf_req) { + spin_unlock_irqrestore(&adapter->req_list_lock, flags); + ZFCP_LOG_NORMAL("error: unknown request id (%ld).\n", req_id); + zfcp_erp_adapter_reopen(adapter, 0); + return -EINVAL; + } + + zfcp_reqlist_remove(adapter, req_id); + atomic_dec(&adapter->reqs_active); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); + + /* finish the FSF request */ + zfcp_fsf_req_complete(fsf_req); + + return 0; +} + /* * function: zfcp_qdio_response_handler * @@ -344,7 +375,7 @@ zfcp_qdio_response_handler(struct ccw_device *ccw_device, /* look for QDIO request identifiers in SB */ buffere = &buffer->element[buffere_index]; retval = zfcp_qdio_reqid_check(adapter, - (void *) buffere->addr); + (unsigned long) buffere->addr); if (retval) { ZFCP_LOG_NORMAL("bug: unexpected inbound " @@ -415,52 +446,6 @@ zfcp_qdio_response_handler(struct ccw_device *ccw_device, return; } -/* - * function: zfcp_qdio_reqid_check - * - * purpose: checks for valid reqids or unsolicited status - * - * returns: 0 - valid request id or unsolicited status - * !0 - otherwise - */ -int -zfcp_qdio_reqid_check(struct zfcp_adapter *adapter, void *sbale_addr) -{ - struct zfcp_fsf_req *fsf_req; - unsigned long flags; - - /* invalid (per convention used in this driver) */ - if (unlikely(!sbale_addr)) { - ZFCP_LOG_NORMAL("bug: invalid reqid\n"); - return -EINVAL; - } - - /* valid request id and thus (hopefully :) valid fsf_req address */ - fsf_req = (struct zfcp_fsf_req *) sbale_addr; - - /* serialize with zfcp_fsf_req_dismiss_all */ - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - if (list_empty(&adapter->fsf_req_list_head)) { - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - return 0; - } - list_del(&fsf_req->list); - atomic_dec(&adapter->fsf_reqs_active); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - - if (unlikely(adapter != fsf_req->adapter)) { - ZFCP_LOG_NORMAL("bug: invalid reqid (fsf_req=%p, " - "fsf_req->adapter=%p, adapter=%p)\n", - fsf_req, fsf_req->adapter, adapter); - return -EINVAL; - } - - /* finish the FSF request */ - zfcp_fsf_req_complete(fsf_req); - - return 0; -} - /** * zfcp_qdio_sbale_get - return pointer to SBALE of qdio_queue * @queue: queue from which SBALE should be returned -- cgit v1.2.2 From f6c0e7a7b3b6db15146877c0cef43b413af5b76e Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 2 Aug 2006 11:05:52 +0200 Subject: [SCSI] zfcp: minor erp bug fixes Bug fixes for zfcp's erp: - trigger adapter reopen if do_QDIO fails - avoid erp deadlock if registration of scsi target or remote port hang - do not treat as error if exchange port data fails - decrease timeout for target reset and aborts - mark unit failed if slave_destroy is called Additionally some code cleanup was done: - made some functions void when retval is not of interest - shortened initialization of zfcp's host_template - corrected some comments Signed-off-by: Andreas Herrmann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_def.h | 2 +- drivers/s390/scsi/zfcp_erp.c | 196 +++++++++++++++--------------------------- drivers/s390/scsi/zfcp_ext.h | 3 +- drivers/s390/scsi/zfcp_scsi.c | 73 ++++++++-------- 4 files changed, 107 insertions(+), 167 deletions(-) diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 72293f3870b5..904d6a7e9312 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -80,7 +80,7 @@ zfcp_address_to_sg(void *address, struct scatterlist *list) #define REQUEST_LIST_SIZE 128 /********************* SCSI SPECIFIC DEFINES *********************************/ -#define ZFCP_SCSI_ER_TIMEOUT (100*HZ) +#define ZFCP_SCSI_ER_TIMEOUT (10*HZ) /********************* CIO/QDIO SPECIFIC DEFINES *****************************/ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index f74412bd9d6a..7f60b6fdf724 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -64,8 +64,8 @@ static int zfcp_erp_strategy_check_action(struct zfcp_erp_action *, int); static int zfcp_erp_adapter_strategy(struct zfcp_erp_action *); static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *, int); static int zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *); -static int zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *); -static int zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *); +static void zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *); +static void zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *); static int zfcp_erp_adapter_strategy_open(struct zfcp_erp_action *); static int zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *); static int zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *); @@ -93,10 +93,9 @@ static int zfcp_erp_unit_strategy_clearstati(struct zfcp_unit *); static int zfcp_erp_unit_strategy_close(struct zfcp_erp_action *); static int zfcp_erp_unit_strategy_open(struct zfcp_erp_action *); -static int zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *); -static int zfcp_erp_action_dismiss_port(struct zfcp_port *); -static int zfcp_erp_action_dismiss_unit(struct zfcp_unit *); -static int zfcp_erp_action_dismiss(struct zfcp_erp_action *); +static void zfcp_erp_action_dismiss_port(struct zfcp_port *); +static void zfcp_erp_action_dismiss_unit(struct zfcp_unit *); +static void zfcp_erp_action_dismiss(struct zfcp_erp_action *); static int zfcp_erp_action_enqueue(int, struct zfcp_adapter *, struct zfcp_port *, struct zfcp_unit *); @@ -135,29 +134,39 @@ zfcp_fsf_request_timeout_handler(unsigned long data) zfcp_erp_adapter_reopen(adapter, 0); } -/* - * function: zfcp_fsf_scsi_er_timeout_handler - * - * purpose: This function needs to be called whenever a SCSI error recovery - * action (abort/reset) does not return. - * Re-opening the adapter means that the command can be returned - * by zfcp (it is guarranteed that it does not return via the - * adapter anymore). The buffer can then be used again. - * - * returns: sod all +/** + * zfcp_fsf_scsi_er_timeout_handler - timeout handler for scsi eh tasks + * + * This function needs to be called whenever a SCSI error recovery + * action (abort/reset) does not return. Re-opening the adapter means + * that the abort/reset command can be returned by zfcp. It won't complete + * via the adapter anymore (because qdio queues are closed). If ERP is + * already running on this adapter it will be stopped. */ -void -zfcp_fsf_scsi_er_timeout_handler(unsigned long data) +void zfcp_fsf_scsi_er_timeout_handler(unsigned long data) { struct zfcp_adapter *adapter = (struct zfcp_adapter *) data; + unsigned long flags; ZFCP_LOG_NORMAL("warning: SCSI error recovery timed out. " "Restarting all operations on the adapter %s\n", zfcp_get_busid_by_adapter(adapter)); debug_text_event(adapter->erp_dbf, 1, "eh_lmem_tout"); - zfcp_erp_adapter_reopen(adapter, 0); - return; + write_lock_irqsave(&adapter->erp_lock, flags); + if (atomic_test_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING, + &adapter->status)) { + zfcp_erp_modify_adapter_status(adapter, + ZFCP_STATUS_COMMON_UNBLOCKED|ZFCP_STATUS_COMMON_OPEN, + ZFCP_CLEAR); + zfcp_erp_action_dismiss_adapter(adapter); + write_unlock_irqrestore(&adapter->erp_lock, flags); + /* dismiss all pending requests including requests for ERP */ + zfcp_fsf_req_dismiss_all(adapter); + adapter->fsf_req_seq_no = 0; + } else + write_unlock_irqrestore(&adapter->erp_lock, flags); + zfcp_erp_adapter_reopen(adapter, 0); } /* @@ -670,17 +679,10 @@ zfcp_erp_unit_reopen(struct zfcp_unit *unit, int clear_mask) return retval; } -/* - * function: - * - * purpose: disable I/O, - * return any open requests and clean them up, - * aim: no pending and incoming I/O - * - * returns: +/** + * zfcp_erp_adapter_block - mark adapter as blocked, block scsi requests */ -static void -zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask) +static void zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask) { debug_text_event(adapter->erp_dbf, 6, "a_bl"); zfcp_erp_modify_adapter_status(adapter, @@ -688,15 +690,10 @@ zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask) clear_mask, ZFCP_CLEAR); } -/* - * function: - * - * purpose: enable I/O - * - * returns: +/** + * zfcp_erp_adapter_unblock - mark adapter as unblocked, allow scsi requests */ -static void -zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter) +static void zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter) { debug_text_event(adapter->erp_dbf, 6, "a_ubl"); atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->status); @@ -897,23 +894,15 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action) return retval; } -/* - * purpose: generic handler for asynchronous events related to erp_action events - * (normal completion, time-out, dismissing, retry after - * low memory condition) - * - * note: deletion of timer is not required (e.g. in case of a time-out), - * but a second try does no harm, - * we leave it in here to allow for greater simplification +/** + * zfcp_erp_async_handler_nolock - complete erp_action * - * returns: 0 - there was an action to handle - * !0 - otherwise + * Used for normal completion, time-out, dismissal and failure after + * low memory condition. */ -static int -zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action, - unsigned long set_mask) +static void zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action, + unsigned long set_mask) { - int retval; struct zfcp_adapter *adapter = erp_action->adapter; if (zfcp_erp_action_exists(erp_action) == ZFCP_ERP_ACTION_RUNNING) { @@ -924,43 +913,26 @@ zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action, del_timer(&erp_action->timer); erp_action->status |= set_mask; zfcp_erp_action_ready(erp_action); - retval = 0; } else { /* action is ready or gone - nothing to do */ debug_text_event(adapter->erp_dbf, 3, "a_asyh_gone"); debug_event(adapter->erp_dbf, 3, &erp_action->action, sizeof (int)); - retval = 1; } - - return retval; } -/* - * purpose: generic handler for asynchronous events related to erp_action - * events (normal completion, time-out, dismissing, retry after - * low memory condition) - * - * note: deletion of timer is not required (e.g. in case of a time-out), - * but a second try does no harm, - * we leave it in here to allow for greater simplification - * - * returns: 0 - there was an action to handle - * !0 - otherwise +/** + * zfcp_erp_async_handler - wrapper for erp_async_handler_nolock w/ locking */ -int -zfcp_erp_async_handler(struct zfcp_erp_action *erp_action, - unsigned long set_mask) +void zfcp_erp_async_handler(struct zfcp_erp_action *erp_action, + unsigned long set_mask) { struct zfcp_adapter *adapter = erp_action->adapter; unsigned long flags; - int retval; write_lock_irqsave(&adapter->erp_lock, flags); - retval = zfcp_erp_async_handler_nolock(erp_action, set_mask); + zfcp_erp_async_handler_nolock(erp_action, set_mask); write_unlock_irqrestore(&adapter->erp_lock, flags); - - return retval; } /* @@ -997,17 +969,15 @@ zfcp_erp_timeout_handler(unsigned long data) zfcp_erp_async_handler(erp_action, ZFCP_STATUS_ERP_TIMEDOUT); } -/* - * purpose: is called for an erp_action which needs to be ended - * though not being done, - * this is usually required if an higher is generated, - * action gets an appropriate flag and will be processed - * accordingly +/** + * zfcp_erp_action_dismiss - dismiss an erp_action * - * locks: erp_lock held (thus we need to call another handler variant) + * adapter->erp_lock must be held + * + * Dismissal of an erp_action is usually required if an erp_action of + * higher priority is generated. */ -static int -zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action) +static void zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action) { struct zfcp_adapter *adapter = erp_action->adapter; @@ -1015,8 +985,6 @@ zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action) debug_event(adapter->erp_dbf, 2, &erp_action->action, sizeof (int)); zfcp_erp_async_handler_nolock(erp_action, ZFCP_STATUS_ERP_DISMISSED); - - return 0; } int @@ -2072,18 +2040,12 @@ zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *erp_action) return retval; } -/* - * function: zfcp_qdio_cleanup - * - * purpose: cleans up QDIO operation for the specified adapter - * - * returns: 0 - successful cleanup - * !0 - failed cleanup +/** + * zfcp_erp_adapter_strategy_close_qdio - close qdio queues for an adapter */ -int +static void zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action) { - int retval = ZFCP_ERP_SUCCEEDED; int first_used; int used_count; struct zfcp_adapter *adapter = erp_action->adapter; @@ -2092,15 +2054,13 @@ zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action) ZFCP_LOG_DEBUG("error: attempt to shut down inactive QDIO " "queues on adapter %s\n", zfcp_get_busid_by_adapter(adapter)); - retval = ZFCP_ERP_FAILED; - goto out; + return; } /* * Get queue_lock and clear QDIOUP flag. Thus it's guaranteed that * do_QDIO won't be called while qdio_shutdown is in progress. */ - write_lock_irq(&adapter->request_queue.queue_lock); atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status); write_unlock_irq(&adapter->request_queue.queue_lock); @@ -2132,8 +2092,6 @@ zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action) adapter->request_queue.free_index = 0; atomic_set(&adapter->request_queue.free_count, 0); adapter->request_queue.distance_from_int = 0; - out: - return retval; } static int @@ -2256,11 +2214,11 @@ zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *erp_action) "%s)\n", zfcp_get_busid_by_adapter(adapter)); ret = ZFCP_ERP_FAILED; } - if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status)) { - ZFCP_LOG_INFO("error: exchange port data failed (adapter " + + /* don't treat as error for the sake of compatibility */ + if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status)) + ZFCP_LOG_INFO("warning: exchange port data failed (adapter " "%s\n", zfcp_get_busid_by_adapter(adapter)); - ret = ZFCP_ERP_FAILED; - } return ret; } @@ -2290,18 +2248,12 @@ zfcp_erp_adapter_strategy_open_fsf_statusread(struct zfcp_erp_action return retval; } -/* - * function: zfcp_fsf_cleanup - * - * purpose: cleanup FSF operation for specified adapter - * - * returns: 0 - FSF operation successfully cleaned up - * !0 - failed to cleanup FSF operation for this adapter +/** + * zfcp_erp_adapter_strategy_close_fsf - stop FSF operations for an adapter */ -static int +static void zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *erp_action) { - int retval = ZFCP_ERP_SUCCEEDED; struct zfcp_adapter *adapter = erp_action->adapter; /* @@ -2315,8 +2267,6 @@ zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *erp_action) /* all ports and units are closed */ zfcp_erp_modify_adapter_status(adapter, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); - - return retval; } /* @@ -3291,10 +3241,8 @@ zfcp_erp_action_cleanup(int action, struct zfcp_adapter *adapter, } -static int -zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter) +void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter) { - int retval = 0; struct zfcp_port *port; debug_text_event(adapter->erp_dbf, 5, "a_actab"); @@ -3303,14 +3251,10 @@ zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter) else list_for_each_entry(port, &adapter->port_list_head, list) zfcp_erp_action_dismiss_port(port); - - return retval; } -static int -zfcp_erp_action_dismiss_port(struct zfcp_port *port) +static void zfcp_erp_action_dismiss_port(struct zfcp_port *port) { - int retval = 0; struct zfcp_unit *unit; struct zfcp_adapter *adapter = port->adapter; @@ -3321,22 +3265,16 @@ zfcp_erp_action_dismiss_port(struct zfcp_port *port) else list_for_each_entry(unit, &port->unit_list_head, list) zfcp_erp_action_dismiss_unit(unit); - - return retval; } -static int -zfcp_erp_action_dismiss_unit(struct zfcp_unit *unit) +static void zfcp_erp_action_dismiss_unit(struct zfcp_unit *unit) { - int retval = 0; struct zfcp_adapter *adapter = unit->port->adapter; debug_text_event(adapter->erp_dbf, 5, "u_actab"); debug_event(adapter->erp_dbf, 5, &unit->fcp_lun, sizeof (fcp_lun_t)); if (atomic_test_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &unit->status)) zfcp_erp_action_dismiss(&unit->erp_action); - - return retval; } static inline void diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 04bb3a9d90a8..146d7a2b4c4a 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -139,6 +139,7 @@ extern void zfcp_erp_modify_adapter_status(struct zfcp_adapter *, u32, int); extern int zfcp_erp_adapter_reopen(struct zfcp_adapter *, int); extern int zfcp_erp_adapter_shutdown(struct zfcp_adapter *, int); extern void zfcp_erp_adapter_failed(struct zfcp_adapter *); +extern void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *); extern void zfcp_erp_modify_port_status(struct zfcp_port *, u32, int); extern int zfcp_erp_port_reopen(struct zfcp_port *, int); @@ -155,7 +156,7 @@ extern void zfcp_erp_unit_failed(struct zfcp_unit *); extern int zfcp_erp_thread_setup(struct zfcp_adapter *); extern int zfcp_erp_thread_kill(struct zfcp_adapter *); extern int zfcp_erp_wait(struct zfcp_adapter *); -extern int zfcp_erp_async_handler(struct zfcp_erp_action *, unsigned long); +extern void zfcp_erp_async_handler(struct zfcp_erp_action *, unsigned long); extern int zfcp_test_link(struct zfcp_port *); diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 671f4a6a5d18..1bb55086db9f 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -30,7 +30,6 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *, void (*done) (struct scsi_cmnd *)); static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *); static int zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *); -static int zfcp_scsi_eh_bus_reset_handler(struct scsi_cmnd *); static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *); static int zfcp_task_management_function(struct zfcp_unit *, u8, struct scsi_cmnd *); @@ -46,30 +45,22 @@ struct zfcp_data zfcp_data = { .scsi_host_template = { .name = ZFCP_NAME, .proc_name = "zfcp", - .proc_info = NULL, - .detect = NULL, .slave_alloc = zfcp_scsi_slave_alloc, .slave_configure = zfcp_scsi_slave_configure, .slave_destroy = zfcp_scsi_slave_destroy, .queuecommand = zfcp_scsi_queuecommand, .eh_abort_handler = zfcp_scsi_eh_abort_handler, .eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler, - .eh_bus_reset_handler = zfcp_scsi_eh_bus_reset_handler, + .eh_bus_reset_handler = zfcp_scsi_eh_host_reset_handler, .eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler, .can_queue = 4096, .this_id = -1, - /* - * FIXME: - * one less? can zfcp_create_sbale cope with it? - */ .sg_tablesize = ZFCP_MAX_SBALES_PER_REQ, .cmd_per_lun = 1, - .unchecked_isa_dma = 0, .use_clustering = 1, .sdev_attrs = zfcp_sysfs_sdev_attrs, }, .driver_version = ZFCP_VERSION, - /* rest initialised with zeros */ }; /* Find start of Response Information in FCP response unit*/ @@ -176,8 +167,14 @@ zfcp_scsi_slave_alloc(struct scsi_device *sdp) return retval; } -static void -zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) +/** + * zfcp_scsi_slave_destroy - called when scsi device is removed + * + * Remove reference to associated scsi device for an zfcp_unit. + * Mark zfcp_unit as failed. The scsi device might be deleted via sysfs + * or a scan for this device might have failed. + */ +static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; @@ -185,6 +182,7 @@ zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); sdpnt->hostdata = NULL; unit->device = NULL; + zfcp_erp_unit_failed(unit); zfcp_unit_put(unit); } else { ZFCP_LOG_NORMAL("bug: no unit associated with SCSI device at " @@ -549,35 +547,38 @@ zfcp_task_management_function(struct zfcp_unit *unit, u8 tm_flags, } /** - * zfcp_scsi_eh_bus_reset_handler - reset bus (reopen adapter) + * zfcp_scsi_eh_host_reset_handler - handler for host and bus reset + * + * If ERP is already running it will be stopped. */ -int -zfcp_scsi_eh_bus_reset_handler(struct scsi_cmnd *scpnt) +int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) { - struct zfcp_unit *unit = (struct zfcp_unit*) scpnt->device->hostdata; - struct zfcp_adapter *adapter = unit->port->adapter; - - ZFCP_LOG_NORMAL("bus reset because of problems with " - "unit 0x%016Lx\n", unit->fcp_lun); - zfcp_erp_adapter_reopen(adapter, 0); - zfcp_erp_wait(adapter); - - return SUCCESS; -} + struct zfcp_unit *unit; + struct zfcp_adapter *adapter; + unsigned long flags; -/** - * zfcp_scsi_eh_host_reset_handler - reset host (reopen adapter) - */ -int -zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) -{ - struct zfcp_unit *unit = (struct zfcp_unit*) scpnt->device->hostdata; - struct zfcp_adapter *adapter = unit->port->adapter; + unit = (struct zfcp_unit*) scpnt->device->hostdata; + adapter = unit->port->adapter; - ZFCP_LOG_NORMAL("host reset because of problems with " + ZFCP_LOG_NORMAL("host/bus reset because of problems with " "unit 0x%016Lx\n", unit->fcp_lun); - zfcp_erp_adapter_reopen(adapter, 0); - zfcp_erp_wait(adapter); + + write_lock_irqsave(&adapter->erp_lock, flags); + if (atomic_test_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING, + &adapter->status)) { + zfcp_erp_modify_adapter_status(adapter, + ZFCP_STATUS_COMMON_UNBLOCKED|ZFCP_STATUS_COMMON_OPEN, + ZFCP_CLEAR); + zfcp_erp_action_dismiss_adapter(adapter); + write_unlock_irqrestore(&adapter->erp_lock, flags); + zfcp_fsf_req_dismiss_all(adapter); + adapter->fsf_req_seq_no = 0; + zfcp_erp_adapter_reopen(adapter, 0); + } else { + write_unlock_irqrestore(&adapter->erp_lock, flags); + zfcp_erp_adapter_reopen(adapter, 0); + zfcp_erp_wait(adapter); + } return SUCCESS; } -- cgit v1.2.2 From 58b3ac07fed31ffc1349380b78305af6522fe1f4 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 2 Aug 2006 11:06:21 +0200 Subject: [SCSI] zfcp: bump version number New version number fo zfcp driver. Signed-off-by: Andreas Herrmann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_def.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 904d6a7e9312..94d1b74db356 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -52,7 +52,7 @@ /********************* GENERAL DEFINES *********************************/ /* zfcp version number, it consists of major, minor, and patch-level number */ -#define ZFCP_VERSION "4.7.0" +#define ZFCP_VERSION "4.8.0" /** * zfcp_sg_to_address - determine kernel address from struct scatterlist -- cgit v1.2.2 From 3e74051bc7b780c5ba28939f9d5c4cd3280a5ff7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Jul 2006 19:13:36 +0200 Subject: [SCSI] hptiop: backout ioctl mess The hptiop just got merged with a horrible amount of really bad ioctl code that is against the standards for new scsi drivers. This patch backs it out (and fixes a small bug where scsi_add_host is called to early). We can re-add proper APIs once we agree on them. Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/hptiop.c | 566 +------------------------------------------------- 1 file changed, 8 insertions(+), 558 deletions(-) diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 74d4d22e5c05..bcb3444f1dcf 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -45,10 +45,6 @@ static char driver_name[] = "hptiop"; static const char driver_name_long[] = "RocketRAID 3xxx SATA Controller driver"; static const char driver_ver[] = "v1.0 (060426)"; -static DEFINE_SPINLOCK(hptiop_hba_list_lock); -static LIST_HEAD(hptiop_hba_list); -static int hptiop_cdev_major = -1; - static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag); static void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag); static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg); @@ -620,532 +616,11 @@ static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev, return queue_depth; } -struct hptiop_getinfo { - char __user *buffer; - loff_t buflength; - loff_t bufoffset; - loff_t buffillen; - loff_t filpos; -}; - -static void hptiop_copy_mem_info(struct hptiop_getinfo *pinfo, - char *data, int datalen) -{ - if (pinfo->filpos < pinfo->bufoffset) { - if (pinfo->filpos + datalen <= pinfo->bufoffset) { - pinfo->filpos += datalen; - return; - } else { - data += (pinfo->bufoffset - pinfo->filpos); - datalen -= (pinfo->bufoffset - pinfo->filpos); - pinfo->filpos = pinfo->bufoffset; - } - } - - pinfo->filpos += datalen; - if (pinfo->buffillen == pinfo->buflength) - return; - - if (pinfo->buflength - pinfo->buffillen < datalen) - datalen = pinfo->buflength - pinfo->buffillen; - - if (copy_to_user(pinfo->buffer + pinfo->buffillen, data, datalen)) - return; - - pinfo->buffillen += datalen; -} - -static int hptiop_copy_info(struct hptiop_getinfo *pinfo, char *fmt, ...) -{ - va_list args; - char buf[128]; - int len; - - va_start(args, fmt); - len = vsnprintf(buf, sizeof(buf), fmt, args); - va_end(args); - hptiop_copy_mem_info(pinfo, buf, len); - return len; -} - -static void hptiop_ioctl_done(struct hpt_ioctl_k *arg) -{ - arg->done = NULL; - wake_up(&arg->hba->ioctl_wq); -} - -static void hptiop_do_ioctl(struct hpt_ioctl_k *arg) -{ - struct hptiop_hba *hba = arg->hba; - u32 val; - struct hpt_iop_request_ioctl_command __iomem *req; - int ioctl_retry = 0; - - dprintk("scsi%d: hptiop_do_ioctl\n", hba->host->host_no); - - /* - * check (in + out) buff size from application. - * outbuf must be dword aligned. - */ - if (((arg->inbuf_size + 3) & ~3) + arg->outbuf_size > - hba->max_request_size - - sizeof(struct hpt_iop_request_header) - - 4 * sizeof(u32)) { - dprintk("scsi%d: ioctl buf size (%d/%d) is too large\n", - hba->host->host_no, - arg->inbuf_size, arg->outbuf_size); - arg->result = HPT_IOCTL_RESULT_FAILED; - return; - } - -retry: - spin_lock_irq(hba->host->host_lock); - - val = readl(&hba->iop->inbound_queue); - if (val == IOPMU_QUEUE_EMPTY) { - spin_unlock_irq(hba->host->host_lock); - dprintk("scsi%d: no free req for ioctl\n", hba->host->host_no); - arg->result = -1; - return; - } - - req = (struct hpt_iop_request_ioctl_command __iomem *) - ((unsigned long)hba->iop + val); - - writel(HPT_CTL_CODE_LINUX_TO_IOP(arg->ioctl_code), - &req->ioctl_code); - writel(arg->inbuf_size, &req->inbuf_size); - writel(arg->outbuf_size, &req->outbuf_size); - - /* - * use the buffer on the IOP local memory first, then copy it - * back to host. - * the caller's request buffer shoudl be little-endian. - */ - if (arg->inbuf_size) - memcpy_toio(req->buf, arg->inbuf, arg->inbuf_size); - - /* correct the controller ID for IOP */ - if ((arg->ioctl_code == HPT_IOCTL_GET_CHANNEL_INFO || - arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO_V2 || - arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO) - && arg->inbuf_size >= sizeof(u32)) - writel(0, req->buf); - - writel(IOP_REQUEST_TYPE_IOCTL_COMMAND, &req->header.type); - writel(0, &req->header.flags); - writel(offsetof(struct hpt_iop_request_ioctl_command, buf) - + arg->inbuf_size, &req->header.size); - writel((u32)(unsigned long)arg, &req->header.context); - writel(BITS_PER_LONG > 32 ? (u32)((unsigned long)arg>>32) : 0, - &req->header.context_hi32); - writel(IOP_RESULT_PENDING, &req->header.result); - - arg->result = HPT_IOCTL_RESULT_FAILED; - arg->done = hptiop_ioctl_done; - - writel(val, &hba->iop->inbound_queue); - hptiop_pci_posting_flush(hba->iop); - - spin_unlock_irq(hba->host->host_lock); - - wait_event_timeout(hba->ioctl_wq, arg->done == NULL, 60 * HZ); - - if (arg->done != NULL) { - hptiop_reset_hba(hba); - if (ioctl_retry++ < 3) - goto retry; - } - - dprintk("hpt_iop_ioctl %x result %d\n", - arg->ioctl_code, arg->result); -} - -static int __hpt_do_ioctl(struct hptiop_hba *hba, u32 code, void *inbuf, - u32 insize, void *outbuf, u32 outsize) -{ - struct hpt_ioctl_k arg; - arg.hba = hba; - arg.ioctl_code = code; - arg.inbuf = inbuf; - arg.outbuf = outbuf; - arg.inbuf_size = insize; - arg.outbuf_size = outsize; - arg.bytes_returned = NULL; - hptiop_do_ioctl(&arg); - return arg.result; -} - -static inline int hpt_id_valid(__le32 id) -{ - return id != 0 && id != cpu_to_le32(0xffffffff); -} - -static int hptiop_get_controller_info(struct hptiop_hba *hba, - struct hpt_controller_info *pinfo) -{ - int id = 0; - - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CONTROLLER_INFO, - &id, sizeof(int), pinfo, sizeof(*pinfo)); -} - - -static int hptiop_get_channel_info(struct hptiop_hba *hba, int bus, - struct hpt_channel_info *pinfo) -{ - u32 ids[2]; - - ids[0] = 0; - ids[1] = bus; - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CHANNEL_INFO, - ids, sizeof(ids), pinfo, sizeof(*pinfo)); - -} - -static int hptiop_get_logical_devices(struct hptiop_hba *hba, - __le32 *pids, int maxcount) -{ - int i; - u32 count = maxcount - 1; - - if (__hpt_do_ioctl(hba, HPT_IOCTL_GET_LOGICAL_DEVICES, - &count, sizeof(u32), - pids, sizeof(u32) * maxcount)) - return -1; - - maxcount = le32_to_cpu(pids[0]); - for (i = 0; i < maxcount; i++) - pids[i] = pids[i+1]; - - return maxcount; -} - -static int hptiop_get_device_info_v3(struct hptiop_hba *hba, __le32 id, - struct hpt_logical_device_info_v3 *pinfo) -{ - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_DEVICE_INFO_V3, - &id, sizeof(u32), - pinfo, sizeof(*pinfo)); -} - -static const char *get_array_status(struct hpt_logical_device_info_v3 *devinfo) -{ - static char s[64]; - u32 flags = le32_to_cpu(devinfo->u.array.flags); - u32 trans_prog = le32_to_cpu(devinfo->u.array.transforming_progress); - u32 reb_prog = le32_to_cpu(devinfo->u.array.rebuilding_progress); - - if (flags & ARRAY_FLAG_DISABLED) - return "Disabled"; - else if (flags & ARRAY_FLAG_TRANSFORMING) - sprintf(s, "Expanding/Migrating %d.%d%%%s%s", - trans_prog / 100, - trans_prog % 100, - (flags & (ARRAY_FLAG_NEEDBUILDING|ARRAY_FLAG_BROKEN))? - ", Critical" : "", - ((flags & ARRAY_FLAG_NEEDINITIALIZING) && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING))? - ", Unintialized" : ""); - else if ((flags & ARRAY_FLAG_BROKEN) && - devinfo->u.array.array_type != AT_RAID6) - return "Critical"; - else if (flags & ARRAY_FLAG_REBUILDING) - sprintf(s, - (flags & ARRAY_FLAG_NEEDINITIALIZING)? - "%sBackground initializing %d.%d%%" : - "%sRebuilding %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_VERIFYING) - sprintf(s, "%sVerifying %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_INITIALIZING) - sprintf(s, "%sForground initializing %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_NEEDTRANSFORM) - sprintf(s,"%s%s%s", "Need Expanding/Migrating", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - ((flags & ARRAY_FLAG_NEEDINITIALIZING) && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING))? - ", Unintialized" : ""); - else if (flags & ARRAY_FLAG_NEEDINITIALIZING && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING)) - sprintf(s,"%sUninitialized", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : ""); - else if ((flags & ARRAY_FLAG_NEEDBUILDING) || - (flags & ARRAY_FLAG_BROKEN)) - return "Critical"; - else - return "Normal"; - return s; -} - -static void hptiop_dump_devinfo(struct hptiop_hba *hba, - struct hptiop_getinfo *pinfo, __le32 id, int indent) -{ - struct hpt_logical_device_info_v3 devinfo; - int i; - u64 capacity; - - for (i = 0; i < indent; i++) - hptiop_copy_info(pinfo, "\t"); - - if (hptiop_get_device_info_v3(hba, id, &devinfo)) { - hptiop_copy_info(pinfo, "unknown\n"); - return; - } - - switch (devinfo.type) { - - case LDT_DEVICE: { - struct hd_driveid *driveid; - u32 flags = le32_to_cpu(devinfo.u.device.flags); - - driveid = (struct hd_driveid *)devinfo.u.device.ident; - /* model[] is 40 chars long, but we just want 20 chars here */ - driveid->model[20] = 0; - - if (indent) - if (flags & DEVICE_FLAG_DISABLED) - hptiop_copy_info(pinfo,"Missing\n"); - else - hptiop_copy_info(pinfo, "CH%d %s\n", - devinfo.u.device.path_id + 1, - driveid->model); - else { - capacity = le64_to_cpu(devinfo.capacity) * 512; - do_div(capacity, 1000000); - hptiop_copy_info(pinfo, - "CH%d %s, %lluMB, %s %s%s%s%s\n", - devinfo.u.device.path_id + 1, - driveid->model, - capacity, - (flags & DEVICE_FLAG_DISABLED)? - "Disabled" : "Normal", - devinfo.u.device.read_ahead_enabled? - "[RA]" : "", - devinfo.u.device.write_cache_enabled? - "[WC]" : "", - devinfo.u.device.TCQ_enabled? - "[TCQ]" : "", - devinfo.u.device.NCQ_enabled? - "[NCQ]" : "" - ); - } - break; - } - - case LDT_ARRAY: - if (devinfo.target_id != INVALID_TARGET_ID) - hptiop_copy_info(pinfo, "[DISK %d_%d] ", - devinfo.vbus_id, devinfo.target_id); - - capacity = le64_to_cpu(devinfo.capacity) * 512; - do_div(capacity, 1000000); - hptiop_copy_info(pinfo, "%s (%s), %lluMB, %s\n", - devinfo.u.array.name, - devinfo.u.array.array_type==AT_RAID0? "RAID0" : - devinfo.u.array.array_type==AT_RAID1? "RAID1" : - devinfo.u.array.array_type==AT_RAID5? "RAID5" : - devinfo.u.array.array_type==AT_RAID6? "RAID6" : - devinfo.u.array.array_type==AT_JBOD? "JBOD" : - "unknown", - capacity, - get_array_status(&devinfo)); - for (i = 0; i < devinfo.u.array.ndisk; i++) { - if (hpt_id_valid(devinfo.u.array.members[i])) { - if (cpu_to_le16(1<private_data; - struct hptiop_getinfo info; - int i, j, ndev; - struct hpt_controller_info con_info; - struct hpt_channel_info chan_info; - __le32 ids[32]; - - info.buffer = buf; - info.buflength = count; - info.bufoffset = ppos ? *ppos : 0; - info.filpos = 0; - info.buffillen = 0; - - if (hptiop_get_controller_info(hba, &con_info)) - return -EIO; - - for (i = 0; i < con_info.num_buses; i++) { - if (hptiop_get_channel_info(hba, i, &chan_info) == 0) { - if (hpt_id_valid(chan_info.devices[0])) - hptiop_dump_devinfo(hba, &info, - chan_info.devices[0], 0); - if (hpt_id_valid(chan_info.devices[1])) - hptiop_dump_devinfo(hba, &info, - chan_info.devices[1], 0); - } - } - - ndev = hptiop_get_logical_devices(hba, ids, - sizeof(ids) / sizeof(ids[0])); - - /* - * if hptiop_get_logical_devices fails, ndev==-1 and it just - * output nothing here - */ - for (j = 0; j < ndev; j++) - hptiop_dump_devinfo(hba, &info, ids[j], 0); - - if (ppos) - *ppos += info.buffillen; - - return info.buffillen; -} - -static int hptiop_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct hptiop_hba *hba = file->private_data; - struct hpt_ioctl_u ioctl_u; - struct hpt_ioctl_k ioctl_k; - u32 bytes_returned; - int err = -EINVAL; - - if (copy_from_user(&ioctl_u, - (void __user *)arg, sizeof(struct hpt_ioctl_u))) - return -EINVAL; - - if (ioctl_u.magic != HPT_IOCTL_MAGIC) - return -EINVAL; - - ioctl_k.ioctl_code = ioctl_u.ioctl_code; - ioctl_k.inbuf = NULL; - ioctl_k.inbuf_size = ioctl_u.inbuf_size; - ioctl_k.outbuf = NULL; - ioctl_k.outbuf_size = ioctl_u.outbuf_size; - ioctl_k.hba = hba; - ioctl_k.bytes_returned = &bytes_returned; - - /* verify user buffer */ - if ((ioctl_k.inbuf_size && !access_ok(VERIFY_READ, - ioctl_u.inbuf, ioctl_k.inbuf_size)) || - (ioctl_k.outbuf_size && !access_ok(VERIFY_WRITE, - ioctl_u.outbuf, ioctl_k.outbuf_size)) || - (ioctl_u.bytes_returned && !access_ok(VERIFY_WRITE, - ioctl_u.bytes_returned, sizeof(u32))) || - ioctl_k.inbuf_size + ioctl_k.outbuf_size > 0x10000) { - - dprintk("scsi%d: got bad user address\n", hba->host->host_no); - return -EINVAL; - } - - /* map buffer to kernel. */ - if (ioctl_k.inbuf_size) { - ioctl_k.inbuf = kmalloc(ioctl_k.inbuf_size, GFP_KERNEL); - if (!ioctl_k.inbuf) { - dprintk("scsi%d: fail to alloc inbuf\n", - hba->host->host_no); - err = -ENOMEM; - goto err_exit; - } - - if (copy_from_user(ioctl_k.inbuf, - ioctl_u.inbuf, ioctl_k.inbuf_size)) { - goto err_exit; - } - } - - if (ioctl_k.outbuf_size) { - ioctl_k.outbuf = kmalloc(ioctl_k.outbuf_size, GFP_KERNEL); - if (!ioctl_k.outbuf) { - dprintk("scsi%d: fail to alloc outbuf\n", - hba->host->host_no); - err = -ENOMEM; - goto err_exit; - } - } - - hptiop_do_ioctl(&ioctl_k); - - if (ioctl_k.result == HPT_IOCTL_RESULT_OK) { - if (ioctl_k.outbuf_size && - copy_to_user(ioctl_u.outbuf, - ioctl_k.outbuf, ioctl_k.outbuf_size)) - goto err_exit; - - if (ioctl_u.bytes_returned && - copy_to_user(ioctl_u.bytes_returned, - &bytes_returned, sizeof(u32))) - goto err_exit; - - err = 0; - } - -err_exit: - kfree(ioctl_k.inbuf); - kfree(ioctl_k.outbuf); - - return err; -} - -static int hptiop_cdev_open(struct inode *inode, struct file *file) -{ - struct hptiop_hba *hba; - unsigned i = 0, minor = iminor(inode); - int ret = -ENODEV; - - spin_lock(&hptiop_hba_list_lock); - list_for_each_entry(hba, &hptiop_hba_list, link) { - if (i == minor) { - file->private_data = hba; - ret = 0; - goto out; - } - i++; - } - -out: - spin_unlock(&hptiop_hba_list_lock); - return ret; -} - -static struct file_operations hptiop_cdev_fops = { - .owner = THIS_MODULE, - .read = hptiop_cdev_read, - .ioctl = hptiop_cdev_ioctl, - .open = hptiop_cdev_open, -}; - static ssize_t hptiop_show_fw_version(struct class_device *class_dev, char *buf) { struct Scsi_Host *host = class_to_shost(class_dev); @@ -1296,19 +771,13 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, goto unmap_pci_bar; } - if (scsi_add_host(host, &pcidev->dev)) { - printk(KERN_ERR "scsi%d: scsi_add_host failed\n", - hba->host->host_no); - goto unmap_pci_bar; - } - pci_set_drvdata(pcidev, host); if (request_irq(pcidev->irq, hptiop_intr, IRQF_SHARED, driver_name, hba)) { printk(KERN_ERR "scsi%d: request irq %d failed\n", hba->host->host_no, pcidev->irq); - goto remove_scsi_host; + goto unmap_pci_bar; } /* Allocate request mem */ @@ -1355,9 +824,12 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, if (hptiop_initialize_iop(hba)) goto free_request_mem; - spin_lock(&hptiop_hba_list_lock); - list_add_tail(&hba->link, &hptiop_hba_list); - spin_unlock(&hptiop_hba_list_lock); + if (scsi_add_host(host, &pcidev->dev)) { + printk(KERN_ERR "scsi%d: scsi_add_host failed\n", + hba->host->host_no); + goto free_request_mem; + } + scsi_scan_host(host); @@ -1372,9 +844,6 @@ free_request_mem: free_request_irq: free_irq(hba->pcidev->irq, hba); -remove_scsi_host: - scsi_remove_host(host); - unmap_pci_bar: iounmap(hba->iop); @@ -1422,10 +891,6 @@ static void hptiop_remove(struct pci_dev *pcidev) scsi_remove_host(host); - spin_lock(&hptiop_hba_list_lock); - list_del_init(&hba->link); - spin_unlock(&hptiop_hba_list_lock); - hptiop_shutdown(pcidev); free_irq(hba->pcidev->irq, hba); @@ -1462,27 +927,12 @@ static struct pci_driver hptiop_pci_driver = { static int __init hptiop_module_init(void) { - int error; - printk(KERN_INFO "%s %s\n", driver_name_long, driver_ver); - - error = pci_register_driver(&hptiop_pci_driver); - if (error < 0) - return error; - - hptiop_cdev_major = register_chrdev(0, "hptiop", &hptiop_cdev_fops); - if (hptiop_cdev_major < 0) { - printk(KERN_WARNING "unable to register hptiop device.\n"); - return hptiop_cdev_major; - } - - return 0; + return pci_register_driver(&hptiop_pci_driver); } static void __exit hptiop_module_exit(void) { - dprintk("hptiop_module_exit\n"); - unregister_chrdev(hptiop_cdev_major, "hptiop"); pci_unregister_driver(&hptiop_pci_driver); } -- cgit v1.2.2 From 77d88ee275aeba5da447987f30401bbd4c901ca9 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Mon, 31 Jul 2006 12:19:40 -0500 Subject: [SCSI] mptfc: properly wait for firmware target discovery to complete Based upon a conversation I had with LSI's fibre channel firmware guru, this patch adds another condition under which the driver waits for the firmware link initialization / target discovery to complete. Signed-off-by: Michael Reed Acked-by: Moore, Eric Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 90da7d63b08e..2144554a640d 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -669,7 +669,10 @@ mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) * if still doing discovery, * hang loose a while until finished */ - if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { + if ((pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) || + (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_ONLINE && + (pp0dest->Flags & MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK) + == MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT)) { if (count-- > 0) { msleep(100); goto try_again; -- cgit v1.2.2 From 3a0c56d801df6785b30e36c19e89d7e971c151da Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Mon, 31 Jul 2006 12:19:50 -0500 Subject: [SCSI] mptfc: correct out of order event processing This patch corrects a problem in mptfc which can result in targets being removed after executing an "lsiutil 99" reset of the fibre channel ports. The last rescan event was being processed before the setup reset work due to an inappropriate optimization in the event processing logic. Every rescan event is now queued for execution and the setup reset work now executes in the proper sequence. Signed-off-by: Michael Reed Acked-by: Moore, Eric Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.h | 1 - drivers/message/fusion/mptfc.c | 87 ++++++++++++++++------------------------ 2 files changed, 34 insertions(+), 54 deletions(-) diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index d4cb144ab402..c537d71c18e4 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -640,7 +640,6 @@ typedef struct _MPT_ADAPTER struct work_struct fc_setup_reset_work; struct list_head fc_rports; spinlock_t fc_rescan_work_lock; - int fc_rescan_work_count; struct work_struct fc_rescan_work; char fc_rescan_work_q_name[KOBJ_NAME_LEN]; struct workqueue_struct *fc_rescan_work_q; diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 2144554a640d..85696f34c310 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -898,59 +898,45 @@ mptfc_rescan_devices(void *arg) { MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; int ii; - int work_to_do; u64 pn; - unsigned long flags; struct mptfc_rport_info *ri; - do { - /* start by tagging all ports as missing */ - list_for_each_entry(ri, &ioc->fc_rports, list) { - if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) { - ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING; - } + /* start by tagging all ports as missing */ + list_for_each_entry(ri, &ioc->fc_rports, list) { + if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) { + ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING; } + } - /* - * now rescan devices known to adapter, - * will reregister existing rports - */ - for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) mptfc_GetFcPortPage0(ioc, ii); - mptfc_init_host_attr(ioc,ii); /* refresh */ - mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev); - } + /* + * now rescan devices known to adapter, + * will reregister existing rports + */ + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + (void) mptfc_GetFcPortPage0(ioc, ii); + mptfc_init_host_attr(ioc, ii); /* refresh */ + mptfc_GetFcDevPage0(ioc, ii, mptfc_register_dev); + } - /* delete devices still missing */ - list_for_each_entry(ri, &ioc->fc_rports, list) { - /* if newly missing, delete it */ - if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) { + /* delete devices still missing */ + list_for_each_entry(ri, &ioc->fc_rports, list) { + /* if newly missing, delete it */ + if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) { - ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED| - MPT_RPORT_INFO_FLAGS_MISSING); - fc_remote_port_delete(ri->rport); /* won't sleep */ - ri->rport = NULL; + ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED| + MPT_RPORT_INFO_FLAGS_MISSING); + fc_remote_port_delete(ri->rport); /* won't sleep */ + ri->rport = NULL; - pn = (u64)ri->pg0.WWPN.High << 32 | - (u64)ri->pg0.WWPN.Low; - dfcprintk ((MYIOC_s_INFO_FMT - "mptfc_rescan.%d: %llx deleted\n", - ioc->name, - ioc->sh->host_no, - (unsigned long long)pn)); - } + pn = (u64)ri->pg0.WWPN.High << 32 | + (u64)ri->pg0.WWPN.Low; + dfcprintk ((MYIOC_s_INFO_FMT + "mptfc_rescan.%d: %llx deleted\n", + ioc->name, + ioc->sh->host_no, + (unsigned long long)pn)); } - - /* - * allow multiple passes as target state - * might have changed during scan - */ - spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); - if (ioc->fc_rescan_work_count > 2) /* only need one more */ - ioc->fc_rescan_work_count = 2; - work_to_do = --ioc->fc_rescan_work_count; - spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); - } while (work_to_do); + } } static int @@ -1162,7 +1148,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) * by doing it via the workqueue, some locking is eliminated */ - ioc->fc_rescan_work_count = 1; queue_work(ioc->fc_rescan_work_q, &ioc->fc_rescan_work); flush_workqueue(ioc->fc_rescan_work_q); @@ -1205,10 +1190,8 @@ mptfc_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) case MPI_EVENT_RESCAN: spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); if (ioc->fc_rescan_work_q) { - if (ioc->fc_rescan_work_count++ == 0) { - queue_work(ioc->fc_rescan_work_q, - &ioc->fc_rescan_work); - } + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_rescan_work); } spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); break; @@ -1251,10 +1234,8 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) mptfc_SetFcPortPage1_defaults(ioc); spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); if (ioc->fc_rescan_work_q) { - if (ioc->fc_rescan_work_count++ == 0) { - queue_work(ioc->fc_rescan_work_q, - &ioc->fc_rescan_work); - } + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_rescan_work); } spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); } -- cgit v1.2.2 From 51704c609fcf256dacfcfae3622eb6ef53ac5b48 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 9 Aug 2006 18:36:22 +0800 Subject: [PATCH] libata: Use ATA_FLAG_PIO_POLLING for pdc_adma pdc_adma was overlooked and broken by the irq-pio patch: Only HSM_ST_LAST interrupts should be delivered to this LLDD. Adding ATA_FLAG_PIO_POLLING to pdc_adma fixes the problem (temporarily), before we convert the irq handler of pdc_adma to handle all interrupts. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/pdc_adma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index d1f38c32aa15..efc8fff1d250 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -183,7 +183,8 @@ static struct ata_port_info adma_port_info[] = { { .sht = &adma_ata_sht, .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | - ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, + ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | + ATA_FLAG_PIO_POLLING, .pio_mask = 0x10, /* pio4 */ .udma_mask = 0x1f, /* udma0-4 */ .port_ops = &adma_ata_ops, -- cgit v1.2.2 From a34b6fc04d58ad72fe0cc74cd448f4551bd2ebaf Mon Sep 17 00:00:00 2001 From: Martin Hicks Date: Wed, 5 Jul 2006 15:06:13 -0400 Subject: [PATCH] libata: PHY reset requires writing 0x4 to SControl Hi, Reading the Intel VSC and AHCI it seems like writing 0x302 is incorrect. The only valid values are 4, 1 and 0. Writing 4 disables the PHY. Signed-off-by: Martin Hicks Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 16fc2dd8f2f7..73dd6c8deede 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2746,7 +2746,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) return rc; - scontrol = (scontrol & 0x0f0) | 0x302; + scontrol = (scontrol & 0x0f0) | 0x304; if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) return rc; -- cgit v1.2.2 From 8d3d35b4e20dc2e678fc7cb51165905b5a32fb76 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 9 Aug 2006 14:14:50 -0700 Subject: [PATCH] sky2: phy power problems on 88e805X chips On the 88E805X chipsets (used in laptops), the PHY was not getting powered out of shutdown properly. The variable reg1 was getting reused incorrectly. This is probably the cause of the bug. http://bugzilla.kernel.org/show_bug.cgi?id=6471 Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index de91609ca112..933e87f1cc68 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -233,6 +233,8 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) if (hw->ports > 1) reg1 |= PCI_Y2_PHY2_COMA; } + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + udelay(100); if (hw->chip_id == CHIP_ID_YUKON_EC_U) { sky2_pci_write32(hw, PCI_DEV_REG3, 0); @@ -242,9 +244,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) sky2_pci_write32(hw, PCI_DEV_REG5, 0); } - sky2_pci_write32(hw, PCI_DEV_REG1, reg1); - udelay(100); - break; case PCI_D3hot: -- cgit v1.2.2 From e54b82d739d4a2ef992976c8c0692cdf89286420 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 10 Aug 2006 10:46:56 -0700 Subject: IB/mthca: Make fence flag work for send work requests The fence bit needs to be set in the doorbell too, not just the WQE. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_qp.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index cd8b6721ac9c..157b4f8ac407 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -99,6 +99,10 @@ enum { MTHCA_QP_BIT_RSC = 1 << 3 }; +enum { + MTHCA_SEND_DOORBELL_FENCE = 1 << 5 +}; + struct mthca_qp_path { __be32 port_pkey; u8 rnr_retry; @@ -1502,7 +1506,7 @@ int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, int i; int size; int size0 = 0; - u32 f0 = 0; + u32 f0; int ind; u8 op0 = 0; @@ -1686,6 +1690,8 @@ int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, if (!size0) { size0 = size; op0 = mthca_opcode[wr->opcode]; + f0 = wr->send_flags & IB_SEND_FENCE ? + MTHCA_SEND_DOORBELL_FENCE : 0; } ++ind; @@ -1843,7 +1849,7 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, int i; int size; int size0 = 0; - u32 f0 = 0; + u32 f0; int ind; u8 op0 = 0; @@ -2051,6 +2057,8 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, if (!size0) { size0 = size; op0 = mthca_opcode[wr->opcode]; + f0 = wr->send_flags & IB_SEND_FENCE ? + MTHCA_SEND_DOORBELL_FENCE : 0; } ++ind; -- cgit v1.2.2 From a19aa5c5fdda8b556ab238177ee27c5ef7873c94 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 11 Aug 2006 08:56:57 -0700 Subject: IB/mthca: Fix potential AB-BA deadlock with CQ locks When destroying a QP, mthca locks both the QP's send CQ and receive CQ. However, the following scenario is perfectly valid: QP_a: send_cq == CQ_x, recv_cq == CQ_y QP_b: send_cq == CQ_y, recv_cq == CQ_x The old mthca code simply locked send_cq and then recv_cq, which in this case could lead to an AB-BA deadlock if QP_a and QP_b were destroyed simultaneously. We can fix this by changing the locking code to lock the CQ with the lower CQ number first, which will create a consistent lock ordering. Also, the second CQ is locked with spin_lock_nested() to tell lockdep that we know what we're doing with the lock nesting. This bug was found by lockdep. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_provider.h | 4 +-- drivers/infiniband/hw/mthca/mthca_qp.c | 42 ++++++++++++++++++++-------- 2 files changed, 32 insertions(+), 14 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 8de2887ba15c..9a5bece3fa5c 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -136,8 +136,8 @@ struct mthca_ah { * We have one global lock that protects dev->cq/qp_table. Each * struct mthca_cq/qp also has its own lock. An individual qp lock * may be taken inside of an individual cq lock. Both cqs attached to - * a qp may be locked, with the send cq locked first. No other - * nesting should be done. + * a qp may be locked, with the cq with the lower cqn locked first. + * No other nesting should be done. * * Each struct mthca_cq/qp also has an ref count, protected by the * corresponding table lock. The pointer from the cq/qp_table to the diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 157b4f8ac407..2e8f6f36e0a5 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -1263,6 +1263,32 @@ int mthca_alloc_qp(struct mthca_dev *dev, return 0; } +static void mthca_lock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq) +{ + if (send_cq == recv_cq) + spin_lock_irq(&send_cq->lock); + else if (send_cq->cqn < recv_cq->cqn) { + spin_lock_irq(&send_cq->lock); + spin_lock_nested(&recv_cq->lock, SINGLE_DEPTH_NESTING); + } else { + spin_lock_irq(&recv_cq->lock); + spin_lock_nested(&send_cq->lock, SINGLE_DEPTH_NESTING); + } +} + +static void mthca_unlock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq) +{ + if (send_cq == recv_cq) + spin_unlock_irq(&send_cq->lock); + else if (send_cq->cqn < recv_cq->cqn) { + spin_unlock(&recv_cq->lock); + spin_unlock_irq(&send_cq->lock); + } else { + spin_unlock(&send_cq->lock); + spin_unlock_irq(&recv_cq->lock); + } +} + int mthca_alloc_sqp(struct mthca_dev *dev, struct mthca_pd *pd, struct mthca_cq *send_cq, @@ -1315,17 +1341,13 @@ int mthca_alloc_sqp(struct mthca_dev *dev, * Lock CQs here, so that CQ polling code can do QP lookup * without taking a lock. */ - spin_lock_irq(&send_cq->lock); - if (send_cq != recv_cq) - spin_lock(&recv_cq->lock); + mthca_lock_cqs(send_cq, recv_cq); spin_lock(&dev->qp_table.lock); mthca_array_clear(&dev->qp_table.qp, mqpn); spin_unlock(&dev->qp_table.lock); - if (send_cq != recv_cq) - spin_unlock(&recv_cq->lock); - spin_unlock_irq(&send_cq->lock); + mthca_unlock_cqs(send_cq, recv_cq); err_out: dma_free_coherent(&dev->pdev->dev, sqp->header_buf_size, @@ -1359,9 +1381,7 @@ void mthca_free_qp(struct mthca_dev *dev, * Lock CQs here, so that CQ polling code can do QP lookup * without taking a lock. */ - spin_lock_irq(&send_cq->lock); - if (send_cq != recv_cq) - spin_lock(&recv_cq->lock); + mthca_lock_cqs(send_cq, recv_cq); spin_lock(&dev->qp_table.lock); mthca_array_clear(&dev->qp_table.qp, @@ -1369,9 +1389,7 @@ void mthca_free_qp(struct mthca_dev *dev, --qp->refcount; spin_unlock(&dev->qp_table.lock); - if (send_cq != recv_cq) - spin_unlock(&recv_cq->lock); - spin_unlock_irq(&send_cq->lock); + mthca_unlock_cqs(send_cq, recv_cq); wait_event(qp->wait, !get_qp_refcount(dev, qp)); -- cgit v1.2.2 From 0ee6a17389ceef65f1a86c38872fa98f08489022 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 11 Aug 2006 08:30:31 +0200 Subject: ACPI: fix kfree in i2c_ec error path Signed-off-by: Jean Delvare Signed-off-by: Len Brown --- drivers/acpi/i2c_ec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c index 84239d51dc0c..6809c283ec58 100644 --- a/drivers/acpi/i2c_ec.c +++ b/drivers/acpi/i2c_ec.c @@ -330,7 +330,7 @@ static int acpi_ec_hc_add(struct acpi_device *device) status = acpi_evaluate_integer(ec_hc->handle, "_EC", NULL, &val); if (ACPI_FAILURE(status)) { ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Error obtaining _EC\n")); - kfree(ec_hc->smbus); + kfree(ec_hc); kfree(smbus); return -EIO; } -- cgit v1.2.2 From a0c5a64552e3c57d7f9eb593c6ce21a285ac86b4 Mon Sep 17 00:00:00 2001 From: Yoav Steinberg Date: Sun, 13 Aug 2006 14:17:12 +0100 Subject: [ARM] 3752/1: fix versatile flash resource map Patch from Yoav Steinberg Flash resource mapping for versatile machine included one extra byte for the end address. This results in failure to map other resources on physical address directly after the NOR flash. Signed-off-by: Yoav Steinberg Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index c4e3f8c68479..f2bbef07b1e4 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -285,7 +285,7 @@ static struct flash_platform_data versatile_flash_data = { static struct resource versatile_flash_resource = { .start = VERSATILE_FLASH_BASE, - .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE, + .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }; -- cgit v1.2.2 From 09e590e5d5a93f2eaa748a89c623258e6bad1648 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 12 Aug 2006 10:55:07 +0200 Subject: [PATCH] smc91x: disable DMA mode on the logicpd pxa270 Enabling PXA DMA for the smc91x on the logicpd pxa270 produces unacceptable interference with the TFT panel, so disable it. Also delete the lpd270 versions of the SMC_{in,out}[bl]() macros, as they aren't used, since the board only supports 16bit accesses. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 4ec4b4d23ae5..9f9f8f2d5338 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -136,14 +136,9 @@ #define SMC_CAN_USE_32BIT 0 #define SMC_IO_SHIFT 0 #define SMC_NOWAIT 1 -#define SMC_USE_PXA_DMA 1 -#define SMC_inb(a, r) readb((a) + (r)) #define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -- cgit v1.2.2 From 4d8316d5ea4dcf0bf15d8a06d539ed7c99e9cfbe Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 14 Aug 2006 22:37:22 -0700 Subject: ACPI: fix boot with acpi=off Fix acpi_ac/battery boot with acpi=off Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/ac.c | 2 ++ drivers/acpi/battery.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 96309b9660da..11abc7bf777e 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -285,6 +285,8 @@ static int __init acpi_ac_init(void) { int result; + if (acpi_disabled) + return -ENODEV; acpi_ac_dir = acpi_lock_ac_dir(); if (!acpi_ac_dir) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 6e5221707d97..9810e2a55d0a 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -757,6 +757,9 @@ static int __init acpi_battery_init(void) { int result; + if (acpi_disabled) + return -ENODEV; + acpi_battery_dir = acpi_lock_battery_dir(); if (!acpi_battery_dir) return -ENODEV; -- cgit v1.2.2 From b20d2aeb0ad322cbe7fd9120acae6118231b17a3 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 15 Aug 2006 23:21:37 -0400 Subject: ACPI: skip smart battery init when acpi=off Signed-off-by: Len Brown --- drivers/acpi/sbs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index db7b350a5035..62bef0b3b614 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -1714,6 +1714,9 @@ static int __init acpi_sbs_init(void) { int result = 0; + if (acpi_disabled) + return -ENODEV; + init_MUTEX(&sbs_sem); if (capacity_mode != DEF_CAPACITY_UNIT -- cgit v1.2.2 From 7daef60721e03809c7e5f8aa8491df4190f6b56f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 14 Aug 2006 22:37:24 -0700 Subject: ACPI: add message if firmware_register() init fails Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/bus.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index b2977695e120..7b77ee146a80 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -738,7 +739,10 @@ static int __init acpi_init(void) return -ENODEV; } - firmware_register(&acpi_subsys); + result = firmware_register(&acpi_subsys); + if (result < 0) + printk(KERN_WARNING "%s: firmware_register error: %d\n", + __FUNCTION__, result); result = acpi_bus_init(); -- cgit v1.2.2 From e9a315bcae3b9e0c54fb68ef90d0095956314480 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 14 Aug 2006 22:37:24 -0700 Subject: ACPI: verbose on kset/kobject_register errors Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/scan.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 5fcb50c7b778..698a1540e303 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -4,6 +4,7 @@ #include #include +#include #include #include @@ -113,6 +114,8 @@ static struct kset acpi_namespace_kset = { static void acpi_device_register(struct acpi_device *device, struct acpi_device *parent) { + int err; + /* * Linkage * ------- @@ -138,7 +141,10 @@ static void acpi_device_register(struct acpi_device *device, device->kobj.parent = &parent->kobj; device->kobj.ktype = &ktype_acpi_ns; device->kobj.kset = &acpi_namespace_kset; - kobject_register(&device->kobj); + err = kobject_register(&device->kobj); + if (err < 0) + printk(KERN_WARNING "%s: kobject_register error: %d\n", + __FUNCTION__, err); create_sysfs_device_files(device); } @@ -1450,7 +1456,9 @@ static int __init acpi_scan_init(void) if (acpi_disabled) return 0; - kset_register(&acpi_namespace_kset); + result = kset_register(&acpi_namespace_kset); + if (result < 0) + printk(KERN_ERR PREFIX "kset_register error: %d\n", result); result = bus_register(&acpi_bus_type); if (result) { -- cgit v1.2.2 From 07dd4855e7fffeb50565826e5e736509ee8f6129 Mon Sep 17 00:00:00 2001 From: Yasunori Goto Date: Mon, 14 Aug 2006 22:37:32 -0700 Subject: ACPI: memory hotplug: remove useless message at boot time This is to remove noisy useless message at boot. The message is a ton of "ACPI Exception (acpi_memory-0492): AE_ERROR, handle is no memory device" In my emulation, number of memory devices are not so many (only 6), but, this messages are displayed 114 times. It is showed by acpi_memory_register_notify_handler() which is called by acpi_walk_namespace(). acpi_walk_namespace() parses all of ACPI's namespace and execute acpi_memory_register_notify_handler(). So, it is called for all of the device which is defined in namespace. If the parsing device is not memory, acpi_memhotplug ignores it due to "no match" and will parse next device. This is normal route, not an exception. Signed-off-by: Yasunori Goto Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/acpi_memhotplug.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index b0d4b147b19e..1dda370f402b 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -484,10 +484,8 @@ acpi_memory_register_notify_handler(acpi_handle handle, status = is_memory_device(handle); - if (ACPI_FAILURE(status)){ - ACPI_EXCEPTION((AE_INFO, status, "handle is no memory device")); + if (ACPI_FAILURE(status)) return AE_OK; /* continue */ - } status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, acpi_memory_device_notify, NULL); @@ -503,10 +501,8 @@ acpi_memory_deregister_notify_handler(acpi_handle handle, status = is_memory_device(handle); - if (ACPI_FAILURE(status)){ - ACPI_EXCEPTION((AE_INFO, status, "handle is no memory device")); + if (ACPI_FAILURE(status)) return AE_OK; /* continue */ - } status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, -- cgit v1.2.2 From b5240b32b9b2b75917c478d768191862a2b190cc Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Wed, 26 Jul 2006 13:32:00 -0400 Subject: ACPIPHP: allow acpiphp to build without ACPI_DOCK Change the build options for acpiphp so that it may build without being dependent on the ACPI_DOCK option, but yet does not allow the option of acpiphp being built-in when dock is built as a module. This does not change the previous patch for ACPI_IBM_DOCK Kconfig. For the following matrix of config options, I built an i386 kernel. Dock acpiphp should it build? confirmed y y y y y n y y y m y y m y no - acpiphp should acpiphp was convert to m converted to m m n y y m m y y n y y y n n y y n m y y Signed-off-by: Anil S Keshavamurthy Signed-off-by: Kristen Carlson Accardi Signed-off-by: Len Brown --- drivers/pci/hotplug/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 3fae77ffb2fa..1c363d814279 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -76,7 +76,7 @@ config HOTPLUG_PCI_IBM config HOTPLUG_PCI_ACPI tristate "ACPI PCI Hotplug driver" - depends on ACPI_DOCK && HOTPLUG_PCI + depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI) help Say Y here if you have a system that supports PCI Hotplug using ACPI. -- cgit v1.2.2 From acaea9ee460d0ba5a14f0066ba26cfa43dd5fdf3 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 15 Aug 2006 17:20:50 +0300 Subject: IB/core: Fix SM LID/LID change with client reregister set After commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5, when SM LID change or LID change MAD also has a client reregistration bit set, only CLIENT_REREGISTER event is generated. As a result, the sa_query module and the cache module don't update the port information, and ULPs (e.g. IPoIB) stop working. This is the regression we observe as compared to 2.6.17. Rather than generate multiple events (which would have negative performance impact), let us simply let cache and SA query respond to reregister event in the same way as to LID and SM change events. Signed-off-by: Jack Morgenstein Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/core/cache.c | 3 ++- drivers/infiniband/core/sa_query.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index e05ca2cdc73f..75313ade2e0d 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -301,7 +301,8 @@ static void ib_cache_event(struct ib_event_handler *handler, event->event == IB_EVENT_PORT_ACTIVE || event->event == IB_EVENT_LID_CHANGE || event->event == IB_EVENT_PKEY_CHANGE || - event->event == IB_EVENT_SM_CHANGE) { + event->event == IB_EVENT_SM_CHANGE || + event->event == IB_EVENT_CLIENT_REREGISTER) { work = kmalloc(sizeof *work, GFP_ATOMIC); if (work) { INIT_WORK(&work->work, ib_cache_task, work); diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index aeda484ffd82..d6b84226bba7 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -405,7 +405,8 @@ static void ib_sa_event(struct ib_event_handler *handler, struct ib_event *event event->event == IB_EVENT_PORT_ACTIVE || event->event == IB_EVENT_LID_CHANGE || event->event == IB_EVENT_PKEY_CHANGE || - event->event == IB_EVENT_SM_CHANGE) { + event->event == IB_EVENT_SM_CHANGE || + event->event == IB_EVENT_CLIENT_REREGISTER) { struct ib_sa_device *sa_dev; sa_dev = container_of(handler, typeof(*sa_dev), event_handler); -- cgit v1.2.2 From 4e6e6504a4572dee3afcb0925ce92ad559e1e0db Mon Sep 17 00:00:00 2001 From: William Morrrow Date: Mon, 14 Aug 2006 22:37:31 -0700 Subject: ACPI: Handle BIOS that resumes from S3 to suspend routine rather than resume vector A BIOS has been found that resumes from S3 to the routine that invoked suspend, ignoring the resume vector. This appears to the OS as a failed S3 attempt. This same system suspend/resume's properly with Windows. It is possible to invoke the protected mode register restore routine (which would normally restore the sysenter registers) when the BIOS returns from S3. This has no effect on a correctly running system and repairs the damage from the deviant BIOS. Signed-off-by: William Morrow Signed-off-by: Jordan Crouse Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/i386/kernel/acpi/wakeup.S | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S index 9f408eee4e6f..b781b38131c0 100644 --- a/arch/i386/kernel/acpi/wakeup.S +++ b/arch/i386/kernel/acpi/wakeup.S @@ -292,7 +292,10 @@ ENTRY(do_suspend_lowlevel) pushl $3 call acpi_enter_sleep_state addl $4, %esp - ret + +# In case of S3 failure, we'll emerge here. Jump +# to ret_point to recover + jmp ret_point .p2align 4,,7 ret_point: call restore_registers -- cgit v1.2.2 From 5672bde6355f2d12c49df1eec083d25afe489063 Mon Sep 17 00:00:00 2001 From: Handle X Date: Mon, 14 Aug 2006 22:37:27 -0700 Subject: ACPI: hotkey.c fixes, fix for potential crash of hotkey.c While going through the code, I found out some memory leaks and potential crashes in drivers/acpi/hotkey.c Please find the patch to fix them. This patch does the following, 1. Fixes memory leaks in error paths of hotkey_write_config 2. Fixes freeing unallocated pointers in the error paths of hotkey_write_config 3. Uses a loop instead of linear searching for parsing the userspace input in get_params 4. Uses array of char * instead of passing 4 pointer parameters explicitly into the init_{poll_}hotkey_* static functions Signed-off-by: Andrew Morton Acked-by: Luming Yu Signed-off-by: Len Brown --- drivers/acpi/hotkey.c | 281 +++++++++++++++++++++----------------------------- 1 file changed, 119 insertions(+), 162 deletions(-) diff --git a/drivers/acpi/hotkey.c b/drivers/acpi/hotkey.c index 32c9d88fd196..1ba2db671865 100644 --- a/drivers/acpi/hotkey.c +++ b/drivers/acpi/hotkey.c @@ -91,6 +91,14 @@ enum { HK_EVENT_ENTERRING_S5, }; +enum conf_entry_enum { + bus_handle = 0, + bus_method = 1, + action_handle = 2, + method = 3, + LAST_CONF_ENTRY +}; + /* procdir we use */ static struct proc_dir_entry *hotkey_proc_dir; static struct proc_dir_entry *hotkey_config; @@ -244,19 +252,15 @@ static int hotkey_info_open_fs(struct inode *inode, struct file *file) static char *format_result(union acpi_object *object) { - char *buf = NULL; - - buf = (char *)kmalloc(RESULT_STR_LEN, GFP_KERNEL); - if (buf) - memset(buf, 0, RESULT_STR_LEN); - else - goto do_fail; + char *buf; + buf = kzalloc(RESULT_STR_LEN, GFP_KERNEL); + if (!buf) + return NULL; /* Now, just support integer type */ if (object->type == ACPI_TYPE_INTEGER) sprintf(buf, "%d\n", (u32) object->integer.value); - do_fail: - return (buf); + return buf; } static int hotkey_polling_seq_show(struct seq_file *seq, void *offset) @@ -486,98 +490,102 @@ static void free_hotkey_device(union acpi_hotkey *key) static void free_hotkey_buffer(union acpi_hotkey *key) { + /* key would never be null, action method could be */ kfree(key->event_hotkey.action_method); } static void free_poll_hotkey_buffer(union acpi_hotkey *key) { + /* key would never be null, others could be*/ kfree(key->poll_hotkey.action_method); kfree(key->poll_hotkey.poll_method); kfree(key->poll_hotkey.poll_result); } static int -init_hotkey_device(union acpi_hotkey *key, char *bus_str, char *action_str, - char *method, int std_num, int external_num) +init_hotkey_device(union acpi_hotkey *key, char **config_entry, + int std_num, int external_num) { acpi_handle tmp_handle; acpi_status status = AE_OK; - if (std_num < 0 || IS_POLL(std_num) || !key) goto do_fail; - if (!bus_str || !action_str || !method) + if (!config_entry[bus_handle] || !config_entry[action_handle] + || !config_entry[method]) goto do_fail; key->link.hotkey_type = ACPI_HOTKEY_EVENT; key->link.hotkey_standard_num = std_num; key->event_hotkey.flag = 0; - key->event_hotkey.action_method = method; + key->event_hotkey.action_method = config_entry[method]; - status = - acpi_get_handle(NULL, bus_str, &(key->event_hotkey.bus_handle)); + status = acpi_get_handle(NULL, config_entry[bus_handle], + &(key->event_hotkey.bus_handle)); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; key->event_hotkey.external_hotkey_num = external_num; - status = - acpi_get_handle(NULL, action_str, + status = acpi_get_handle(NULL, config_entry[action_handle], &(key->event_hotkey.action_handle)); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; status = acpi_get_handle(key->event_hotkey.action_handle, - method, &tmp_handle); + config_entry[method], &tmp_handle); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; return AE_OK; - do_fail: +do_fail_zero: + key->event_hotkey.action_method = NULL; +do_fail: return -ENODEV; } static int -init_poll_hotkey_device(union acpi_hotkey *key, - char *poll_str, - char *poll_method, - char *action_str, char *action_method, int std_num) +init_poll_hotkey_device(union acpi_hotkey *key, char **config_entry, + int std_num) { acpi_status status = AE_OK; acpi_handle tmp_handle; - if (std_num < 0 || IS_EVENT(std_num) || !key) goto do_fail; - - if (!poll_str || !poll_method || !action_str || !action_method) + if (!config_entry[bus_handle] ||!config_entry[bus_method] || + !config_entry[action_handle] || !config_entry[method]) goto do_fail; key->link.hotkey_type = ACPI_HOTKEY_POLLING; key->link.hotkey_standard_num = std_num; key->poll_hotkey.flag = 0; - key->poll_hotkey.poll_method = poll_method; - key->poll_hotkey.action_method = action_method; + key->poll_hotkey.poll_method = config_entry[bus_method]; + key->poll_hotkey.action_method = config_entry[method]; - status = - acpi_get_handle(NULL, poll_str, &(key->poll_hotkey.poll_handle)); + status = acpi_get_handle(NULL, config_entry[bus_handle], + &(key->poll_hotkey.poll_handle)); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; status = acpi_get_handle(key->poll_hotkey.poll_handle, - poll_method, &tmp_handle); + config_entry[bus_method], &tmp_handle); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; status = - acpi_get_handle(NULL, action_str, + acpi_get_handle(NULL, config_entry[action_handle], &(key->poll_hotkey.action_handle)); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; status = acpi_get_handle(key->poll_hotkey.action_handle, - action_method, &tmp_handle); + config_entry[method], &tmp_handle); if (ACPI_FAILURE(status)) - goto do_fail; + goto do_fail_zero; key->poll_hotkey.poll_result = (union acpi_object *)kmalloc(sizeof(union acpi_object), GFP_KERNEL); if (!key->poll_hotkey.poll_result) - goto do_fail; + goto do_fail_zero; return AE_OK; - do_fail: + +do_fail_zero: + key->poll_hotkey.poll_method = NULL; + key->poll_hotkey.action_method = NULL; +do_fail: return -ENODEV; } @@ -652,17 +660,18 @@ static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset) } static int -get_parms(char *config_record, - int *cmd, - char **bus_handle, - char **bus_method, - char **action_handle, - char **method, int *internal_event_num, int *external_event_num) +get_parms(char *config_record, int *cmd, char **config_entry, + int *internal_event_num, int *external_event_num) { +/* the format of *config_record = + * "1:\d+:*" : "cmd:internal_event_num" + * "\d+:\w+:\w+:\w+:\w+:\d+:\d+" : + * "cmd:bus_handle:bus_method:action_handle:method:internal_event_num:external_event_num" + */ char *tmp, *tmp1, count; + int i; sscanf(config_record, "%d", cmd); - if (*cmd == 1) { if (sscanf(config_record, "%d:%d", cmd, internal_event_num) != 2) @@ -674,59 +683,27 @@ get_parms(char *config_record, if (!tmp) goto do_fail; tmp++; - tmp1 = strchr(tmp, ':'); - if (!tmp1) - goto do_fail; - - count = tmp1 - tmp; - *bus_handle = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!*bus_handle) - goto do_fail; - strncpy(*bus_handle, tmp, count); - *(*bus_handle + count) = 0; - - tmp = tmp1; - tmp++; - tmp1 = strchr(tmp, ':'); - if (!tmp1) - goto do_fail; - count = tmp1 - tmp; - *bus_method = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!*bus_method) - goto do_fail; - strncpy(*bus_method, tmp, count); - *(*bus_method + count) = 0; - - tmp = tmp1; - tmp++; - tmp1 = strchr(tmp, ':'); - if (!tmp1) - goto do_fail; - count = tmp1 - tmp; - *action_handle = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!*action_handle) - goto do_fail; - strncpy(*action_handle, tmp, count); - *(*action_handle + count) = 0; - - tmp = tmp1; - tmp++; - tmp1 = strchr(tmp, ':'); - if (!tmp1) - goto do_fail; - count = tmp1 - tmp; - *method = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!*method) - goto do_fail; - strncpy(*method, tmp, count); - *(*method + count) = 0; - - if (sscanf(tmp1 + 1, "%d:%d", internal_event_num, external_event_num) <= - 0) - goto do_fail; - - return 6; - do_fail: + for (i = 0; i < LAST_CONF_ENTRY; i++) { + tmp1 = strchr(tmp, ':'); + if (!tmp1) { + goto do_fail; + } + count = tmp1 - tmp; + config_entry[i] = kzalloc(count + 1, GFP_KERNEL); + if (!config_entry[i]) + goto handle_failure; + strncpy(config_entry[i], tmp, count); + tmp = tmp1 + 1; + } + if (sscanf(tmp, "%d:%d", internal_event_num, external_event_num) <= 0) + goto handle_failure; + if (!IS_OTHERS(*internal_event_num)) { + return 6; + } +handle_failure: + while (i-- > 0) + kfree(config_entry[i]); +do_fail: return -1; } @@ -736,50 +713,34 @@ static ssize_t hotkey_write_config(struct file *file, size_t count, loff_t * data) { char *config_record = NULL; - char *bus_handle = NULL; - char *bus_method = NULL; - char *action_handle = NULL; - char *method = NULL; + char *config_entry[LAST_CONF_ENTRY]; int cmd, internal_event_num, external_event_num; int ret = 0; - union acpi_hotkey *key = NULL; + union acpi_hotkey *key = kzalloc(sizeof(union acpi_hotkey), GFP_KERNEL); + if (!key) + return -ENOMEM; - config_record = (char *)kmalloc(count + 1, GFP_KERNEL); - if (!config_record) + config_record = kzalloc(count + 1, GFP_KERNEL); + if (!config_record) { + kfree(key); return -ENOMEM; + } if (copy_from_user(config_record, buffer, count)) { kfree(config_record); + kfree(key); printk(KERN_ERR PREFIX "Invalid data\n"); return -EINVAL; } - config_record[count] = 0; - - ret = get_parms(config_record, - &cmd, - &bus_handle, - &bus_method, - &action_handle, - &method, &internal_event_num, &external_event_num); - + ret = get_parms(config_record, &cmd, config_entry, + &internal_event_num, &external_event_num); kfree(config_record); - if (IS_OTHERS(internal_event_num)) - goto do_fail; if (ret != 6) { - do_fail: - kfree(bus_handle); - kfree(bus_method); - kfree(action_handle); - kfree(method); printk(KERN_ERR PREFIX "Invalid data format ret=%d\n", ret); return -EINVAL; } - key = kmalloc(sizeof(union acpi_hotkey), GFP_KERNEL); - if (!key) - goto do_fail; - memset(key, 0, sizeof(union acpi_hotkey)); if (cmd == 1) { union acpi_hotkey *tmp = NULL; tmp = get_hotkey_by_event(&global_hotkey_list, @@ -791,34 +752,19 @@ static ssize_t hotkey_write_config(struct file *file, goto cont_cmd; } if (IS_EVENT(internal_event_num)) { - kfree(bus_method); - ret = init_hotkey_device(key, bus_handle, action_handle, method, - internal_event_num, - external_event_num); - } else - ret = init_poll_hotkey_device(key, bus_handle, bus_method, - action_handle, method, - internal_event_num); - if (ret) { - kfree(bus_handle); - kfree(action_handle); - if (IS_EVENT(internal_event_num)) - free_hotkey_buffer(key); - else - free_poll_hotkey_buffer(key); - kfree(key); - printk(KERN_ERR PREFIX "Invalid hotkey\n"); - return -EINVAL; + if (init_hotkey_device(key, config_entry, + internal_event_num, external_event_num)) + goto init_hotkey_fail; + } else { + if (init_poll_hotkey_device(key, config_entry, + internal_event_num)) + goto init_poll_hotkey_fail; } - - cont_cmd: - kfree(bus_handle); - kfree(action_handle); - +cont_cmd: switch (cmd) { case 0: - if (get_hotkey_by_event - (&global_hotkey_list, key->link.hotkey_standard_num)) + if (get_hotkey_by_event(&global_hotkey_list, + key->link.hotkey_standard_num)) goto fail_out; else hotkey_add(key); @@ -827,6 +773,7 @@ static ssize_t hotkey_write_config(struct file *file, hotkey_remove(key); break; case 2: + /* key is kfree()ed if matched*/ if (hotkey_update(key)) goto fail_out; break; @@ -835,11 +782,22 @@ static ssize_t hotkey_write_config(struct file *file, break; } return count; - fail_out: - if (IS_EVENT(internal_event_num)) - free_hotkey_buffer(key); - else - free_poll_hotkey_buffer(key); + +init_poll_hotkey_fail: /* failed init_poll_hotkey_device */ + kfree(config_entry[bus_method]); + config_entry[bus_method] = NULL; +init_hotkey_fail: /* failed init_hotkey_device */ + kfree(config_entry[method]); +fail_out: + kfree(config_entry[bus_handle]); + kfree(config_entry[action_handle]); + /* No double free since elements =NULL for error cases */ + if (IS_EVENT(internal_event_num)) { + if (config_entry[bus_method]) + kfree(config_entry[bus_method]); + free_hotkey_buffer(key); /* frees [method] */ + } else + free_poll_hotkey_buffer(key); /* frees [bus_method]+[method] */ kfree(key); printk(KERN_ERR PREFIX "invalid key\n"); return -EINVAL; @@ -923,10 +881,9 @@ static ssize_t hotkey_execute_aml_method(struct file *file, union acpi_hotkey *key; - arg = (char *)kmalloc(count + 1, GFP_KERNEL); + arg = kzalloc(count + 1, GFP_KERNEL); if (!arg) return -ENOMEM; - arg[count] = 0; if (copy_from_user(arg, buffer, count)) { kfree(arg); -- cgit v1.2.2 From d68909f4c3eee09c13d4e5c86512c6c075553dbd Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 16 Aug 2006 19:16:58 -0400 Subject: ACPI: avoid irqrouter_resume might_sleep oops on resume from S4 __might_sleep+0x8e/0x93 acpi_os_wait_semaphore+0x50/0xa3 acpi_ut_acquire_mutex+0x28/0x6a acpi_ns_get_node+0x46/0x88 acpi_ns_evaluate+0x2d/0xfc acpi_rs_set_srs_method_data+0xc5/0xe1 acpi_set_current_resources+0x31/0x3f acpi_pci_link_set+0xfc/0x1a5 irqrouter_resume+0x48/0x5f and __might_sleep+0x8e/0x93 kmem_cache_alloc+0x2a/0x8f acpi_evaluate_integer+0x32/0x96 acpi_bus_get_status+0x30/0x84 acpi_pci_link_set+0x12a/0x1a5 irqrouter_resume+0x48/0x5f http://bugzilla.kernel.org/show_bug.cgi?id=6810 Signed-off-by: Len Brown --- drivers/acpi/osl.c | 10 ++++++++++ drivers/acpi/utils.c | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index b7d1514cd199..507f051d1cef 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -746,6 +746,16 @@ acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout) ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Waiting for semaphore[%p|%d|%d]\n", handle, units, timeout)); + /* + * This can be called during resume with interrupts off. + * Like boot-time, we should be single threaded and will + * always get the lock if we try -- timeout or not. + * If this doesn't succeed, then we will oops courtesy of + * might_sleep() in down(). + */ + if (!down_trylock(sem)) + return AE_OK; + switch (timeout) { /* * No Wait: diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index f48227f4c8c9..d0d84c43a9d4 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -262,7 +262,7 @@ acpi_evaluate_integer(acpi_handle handle, if (!data) return AE_BAD_PARAMETER; - element = kmalloc(sizeof(union acpi_object), GFP_KERNEL); + element = kmalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL); if (!element) return AE_NO_MEMORY; -- cgit v1.2.2 From f57e1abd1bb297994c7398478b4c37e628095243 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 18 Aug 2006 15:32:10 +0100 Subject: [ARM] 3753/1: S3C24XX: DMA fixes Patch from Ben Dooks A number of small issues with the S3C24XX DMA have cropped up, which this patch fixes. These are: - check wether we can load another buff in start - update state handling in s3c2410_dma_lastxfer - only reload in irq if channel is not idle - more informative timeout errors (add source) - do not call request_irq() with irqs locked - added waitforstop function The patch also adds a S3C2410_DMAOP_STARTED for the occasions when the driver wants to ensure that the DMA system load state is resynced after loading. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/dma.c | 163 ++++++++++++++++++++++++++++++++----- include/asm-arm/arch-s3c2410/dma.h | 1 + 2 files changed, 145 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 094cc52745c5..25855452fe8c 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -112,7 +112,7 @@ dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs) } static void -dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan, +dmadbg_dumpregs(const char *fname, int line, s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs) { printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", @@ -132,7 +132,16 @@ dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan) chan->number, fname, line, chan->load_state, chan->curr, chan->next, chan->end); - dmadbg_showregs(fname, line, chan, &state); + dmadbg_dumpregs(fname, line, chan, &state); +} + +static void +dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan) +{ + struct s3c2410_dma_regstate state; + + dmadbg_capture(chan, &state); + dmadbg_dumpregs(fname, line, chan, &state); } #define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan)) @@ -253,10 +262,14 @@ s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan, buf->next); reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; } else { - pr_debug("load_state is %d => autoreload\n", chan->load_state); + //pr_debug("load_state is %d => autoreload\n", chan->load_state); reload = S3C2410_DCON_AUTORELOAD; } + if ((buf->data & 0xf0000000) != 0x30000000) { + dmawarn("dmaload: buffer is %p\n", (void *)buf->data); + } + writel(buf->data, chan->addr_reg); dma_wrreg(chan, S3C2410_DMA_DCON, @@ -370,7 +383,7 @@ static int s3c2410_dma_start(s3c2410_dma_chan_t *chan) tmp |= S3C2410_DMASKTRIG_ON; dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - pr_debug("wrote %08lx to DMASKTRIG\n", tmp); + pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); #if 0 /* the dma buffer loads should take care of clearing the AUTO @@ -384,7 +397,30 @@ static int s3c2410_dma_start(s3c2410_dma_chan_t *chan) dbg_showchan(chan); + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __FUNCTION__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + local_irq_restore(flags); + return 0; } @@ -436,12 +472,11 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); if (buf == NULL) { pr_debug("%s: out of memory (%ld alloc)\n", - __FUNCTION__, sizeof(*buf)); + __FUNCTION__, (long)sizeof(*buf)); return -ENOMEM; } - pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); - + //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); //dbg_showchan(chan); buf->next = NULL; @@ -537,14 +572,20 @@ s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan) case S3C2410_DMALOAD_1LOADED: if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load\n", - chan->number); + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __FUNCTION__); return; } break; + case S3C2410_DMALOAD_1LOADED_1RUNNING: + /* I belive in this case we do not have anything to do + * until the next buffer comes along, and we turn off the + * reload */ + return; + default: - pr_debug("dma%d: lastxfer: unhandled load_state %d with no next", + pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", chan->number, chan->load_state); return; @@ -629,7 +670,14 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) } else { } - if (chan->next != NULL) { + /* only reload if the channel is still running... our buffer done + * routine may have altered the state by requesting the dma channel + * to stop or shutdown... */ + + /* todo: check that when the channel is shut-down from inside this + * function, we cope with unsetting reload, etc */ + + if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { unsigned long flags; switch (chan->load_state) { @@ -644,8 +692,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) case S3C2410_DMALOAD_1LOADED: if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load\n", - chan->number); + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __FUNCTION__); return IRQ_HANDLED; } @@ -678,8 +726,6 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) return IRQ_HANDLED; } - - /* s3c2410_request_dma * * get control of an dma channel @@ -718,11 +764,17 @@ int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client, pr_debug("dma%d: %s : requesting irq %d\n", channel, __FUNCTION__, chan->irq); + chan->irq_claimed = 1; + local_irq_restore(flags); + err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, client->name, (void *)chan); + local_irq_save(flags); + if (err) { chan->in_use = 0; + chan->irq_claimed = 0; local_irq_restore(flags); printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", @@ -730,7 +782,6 @@ int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client, return err; } - chan->irq_claimed = 1; chan->irq_enabled = 1; } @@ -810,6 +861,7 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan) tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); tmp |= S3C2410_DMASKTRIG_STOP; + //tmp &= ~S3C2410_DMASKTRIG_ON; dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); #if 0 @@ -819,6 +871,7 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan) dma_wrreg(chan, S3C2410_DMA_DCON, tmp); #endif + /* should stop do this, or should we wait for flush? */ chan->state = S3C2410_DMA_IDLE; chan->load_state = S3C2410_DMALOAD_NONE; @@ -827,6 +880,22 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan) return 0; } +void s3c2410_dma_waitforstop(s3c2410_dma_chan_t *chan) +{ + unsigned long tmp; + unsigned int timeout = 0x10000; + + while (timeout-- > 0) { + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + + if (!(tmp & S3C2410_DMASKTRIG_ON)) + return; + } + + pr_debug("dma%d: failed to stop?\n", chan->number); +} + + /* s3c2410_dma_flush * * stop the channel, and remove all current and pending transfers @@ -837,7 +906,9 @@ static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan) s3c2410_dma_buf_t *buf, *next; unsigned long flags; - pr_debug("%s:\n", __FUNCTION__); + pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number); + + dbg_showchan(chan); local_irq_save(flags); @@ -864,11 +935,64 @@ static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan) } } + dbg_showregs(chan); + + s3c2410_dma_waitforstop(chan); + +#if 0 + /* should also clear interrupts, according to WinCE BSP */ + { + unsigned long tmp; + + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp |= S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); + } +#endif + + dbg_showregs(chan); + local_irq_restore(flags); return 0; } +int +s3c2410_dma_started(s3c2410_dma_chan_t *chan) +{ + unsigned long flags; + + local_irq_save(flags); + + dbg_showchan(chan); + + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __FUNCTION__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + + local_irq_restore(flags); + + return 0; + +} int s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op) @@ -885,14 +1009,15 @@ s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op) return s3c2410_dma_dostop(chan); case S3C2410_DMAOP_PAUSE: - return -ENOENT; - case S3C2410_DMAOP_RESUME: return -ENOENT; case S3C2410_DMAOP_FLUSH: return s3c2410_dma_flush(chan); + case S3C2410_DMAOP_STARTED: + return s3c2410_dma_started(chan); + case S3C2410_DMAOP_TIMEOUT: return 0; diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index 72964f9b8414..7463fd5252ce 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -104,6 +104,7 @@ enum s3c2410_chan_op_e { S3C2410_DMAOP_RESUME, S3C2410_DMAOP_FLUSH, S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ + S3C2410_DMAOP_STARTED, /* indicate channel started */ }; typedef enum s3c2410_chan_op_e s3c2410_chan_op_t; -- cgit v1.2.2 From 332158e7c206dc6bee0dfb24f2c1d6096e0989cd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 18 Aug 2006 15:32:12 +0100 Subject: [ARM] 3754/1: S3C24XX: tidy arch/arm/mach-s3c2410/Makefile Patch from Ben Dooks tidy up the makefile by using TABs to indent, and ensure that all items are indented the same. Move the DMA to its own section, ready for the next set of updates Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Makefile | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 0c7938645df6..273e05f2b8de 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -10,45 +10,47 @@ obj-m := obj-n := obj- := +# DMA +obj-$(CONFIG_S3C2410_DMA) += dma.o + # S3C2400 support files -obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o +obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o # S3C2410 support files -obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o -obj-$(CONFIG_S3C2410_DMA) += dma.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o # Power Management support -obj-$(CONFIG_PM) += pm.o sleep.o -obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o +obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2412 support -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o # # S3C244X support -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o # Clock control -obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o +obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o # S3C2440 support -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o -obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o +obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o # S3C2442 support -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o # bast extras -- cgit v1.2.2 From e2785f0d4251c35d6e82ec819354374c8c17d63d Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 18 Aug 2006 15:32:14 +0100 Subject: [ARM] 3755/1: dmabounce: fix return value for find_safe_buffer Patch from Kevin Hilman Previous locking changes to dmabounce incorrectly return non-NULL even when buffer not found. Fix it up. Signed-off-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/common/dmabounce.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5b7c26395b44..028bdc9228fb 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -179,17 +179,19 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, static inline struct safe_buffer * find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr) { - struct safe_buffer *b = NULL; + struct safe_buffer *b, *rb = NULL; unsigned long flags; read_lock_irqsave(&device_info->lock, flags); list_for_each_entry(b, &device_info->safe_buffers, node) - if (b->safe_dma_addr == safe_dma_addr) + if (b->safe_dma_addr == safe_dma_addr) { + rb = b; break; + } read_unlock_irqrestore(&device_info->lock, flags); - return b; + return rb; } static inline void -- cgit v1.2.2 From 3a834635e8953839dba3f417a26414039b0c7c48 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Fri, 18 Aug 2006 15:32:17 +0100 Subject: [ARM] 3756/1: Assign value for HWCAP_IWMMXT Patch from Paul Gortmaker Some folks here at Wind River asked me if I'd push this out so that the value was generally agreed upon in advance by all folks interested in working with iWMMXt. Seems simple enough... Signed-off-by: Paul Gortmaker Signed-off-by: Russell King --- include/asm-arm/procinfo.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h index edb7b6502fcf..91a31adfa8a8 100644 --- a/include/asm-arm/procinfo.h +++ b/include/asm-arm/procinfo.h @@ -55,5 +55,6 @@ extern unsigned int elf_hwcap; #define HWCAP_VFP 64 #define HWCAP_EDSP 128 #define HWCAP_JAVA 256 +#define HWCAP_IWMMXT 512 #endif -- cgit v1.2.2 From 90af774ab150b97c0aa8ed0375f4652be986bdce Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 18 Aug 2006 15:34:46 +0100 Subject: [ARM] 3757/1: Use PROCINFO_INITFUNC in head.S Patch from Catalin Marinas This is instead of a magic number. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/head.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4fe386eea4b4..5365d4e5949e 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -118,7 +118,7 @@ ENTRY(secondary_startup) sub r4, r4, r5 @ mmu has been enabled ldr r4, [r7, r4] @ get secondary_data.pgdir adr lr, __enable_mmu @ return address - add pc, r10, #12 @ initialise processor + add pc, r10, #PROCINFO_INITFUNC @ initialise processor @ (return control reg) /* -- cgit v1.2.2 From ba9b5d76372dc290b6ca04dad93927a22c2ac49a Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 18 Aug 2006 17:20:15 +0100 Subject: [ARM] 3746/2: Userspace helpers must be Thumb mode interworkable Patch from Nicolas Pitre The userspace helpers in clean/arch/arm/kernel/entry-armv.S are called directly in/from userspace. They need to cope with being called from Thumb code. Patch below uses the bx interworking instruction when CONFIG_ARM_THUMB=y. Based on an earlier patch from Paul Brook Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 7ea5f01dfc7b..de4e33137901 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -634,6 +634,14 @@ ENTRY(__switch_to) * purpose. */ + .macro usr_ret, reg +#ifdef CONFIG_ARM_THUMB + bx \reg +#else + mov pc, \reg +#endif + .endm + .align 5 .globl __kuser_helper_start __kuser_helper_start: @@ -675,7 +683,7 @@ __kuser_memory_barrier: @ 0xffff0fa0 #if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP) mcr p15, 0, r0, c7, c10, 5 @ dmb #endif - mov pc, lr + usr_ret lr .align 5 @@ -778,7 +786,7 @@ __kuser_cmpxchg: @ 0xffff0fc0 mov r0, #-1 adds r0, r0, #0 #endif - mov pc, lr + usr_ret lr #else @@ -792,7 +800,7 @@ __kuser_cmpxchg: @ 0xffff0fc0 #ifdef CONFIG_SMP mcr p15, 0, r0, c7, c10, 5 @ dmb #endif - mov pc, lr + usr_ret lr #endif @@ -834,16 +842,11 @@ __kuser_cmpxchg: @ 0xffff0fc0 __kuser_get_tls: @ 0xffff0fe0 #if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL) - ldr r0, [pc, #(16 - 8)] @ TLS stored at 0xffff0ff0 - mov pc, lr - #else - mrc p15, 0, r0, c13, c0, 3 @ read TLS register - mov pc, lr - #endif + usr_ret lr .rep 5 .word 0 @ pad up to __kuser_helper_version -- cgit v1.2.2 From df6fd31995cb2e38b2a7e94bc8f1559b8f55404e Mon Sep 17 00:00:00 2001 From: "Starikovskiy, Alexey Y" Date: Fri, 18 Aug 2006 11:23:00 -0400 Subject: ACPI: relax BAD_MADT_ENTRY check to allow LSAPIC variable length string UIDs ACPI 3.0 appended a variable length UID string to the LAPIC structure as part of support for > 256 processors. So the BAD_MADT_ENTRY() sanity check can no longer compare for equality with a fixed structure length. Signed-off-by: Alexey Y Starikovskiy Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 2 +- arch/ia64/kernel/acpi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 0db6387025ca..ee003bc0e8b1 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -59,7 +59,7 @@ static inline int gsi_irq_sharing(int gsi) { return gsi; } #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ - ((acpi_table_entry_header *)entry)->length != sizeof(*entry)) + ((acpi_table_entry_header *)entry)->length < sizeof(*entry)) #define PREFIX "ACPI: " diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 99761b81db44..0176556aeecc 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -55,7 +55,7 @@ #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ - ((acpi_table_entry_header *)entry)->length != sizeof(*entry)) + ((acpi_table_entry_header *)entry)->length < sizeof(*entry)) #define PREFIX "ACPI: " -- cgit v1.2.2 From 5beba53230351b2d77c317c22e66c415f2ebaf02 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 18 Aug 2006 10:41:46 -0700 Subject: IB/mthca: No userspace SRQs if HCA doesn't have SRQ support Leave all SRQ methods out of the device's uverbs_cmd_mask if the device doesn't have SRQ support (because of ancient firmware) so that we don't allow userspace to call the driver's create_srq method. This fixes a userspace-triggerable oops caused by ib_uverbs_create_srq() following the device's ->create_srq function pointer, which will be NULL if the device doesn't support SRQs. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_provider.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 230ae21db8fd..265b1d1c4a62 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1287,11 +1287,7 @@ int mthca_register_device(struct mthca_dev *dev) (1ull << IB_USER_VERBS_CMD_MODIFY_QP) | (1ull << IB_USER_VERBS_CMD_DESTROY_QP) | (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) | - (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) | - (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) | - (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) | - (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) | - (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ); + (1ull << IB_USER_VERBS_CMD_DETACH_MCAST); dev->ib_dev.node_type = IB_NODE_CA; dev->ib_dev.phys_port_cnt = dev->limits.num_ports; dev->ib_dev.dma_device = &dev->pdev->dev; @@ -1316,6 +1312,11 @@ int mthca_register_device(struct mthca_dev *dev) dev->ib_dev.modify_srq = mthca_modify_srq; dev->ib_dev.query_srq = mthca_query_srq; dev->ib_dev.destroy_srq = mthca_destroy_srq; + dev->ib_dev.uverbs_cmd_mask |= + (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) | + (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) | + (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ); if (mthca_is_memfree(dev)) dev->ib_dev.post_srq_recv = mthca_arbel_post_srq_recv; -- cgit v1.2.2 From 33ccf8d1080bdccb4751a92f6da361a6e01b7cc0 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 17 Aug 2006 11:57:58 -0400 Subject: [SCSI] lpfc 8.1.9 : Misc Bug Fixes Misc Bug Fixes: - Cap MBX_DOWN_LINK command timeout to 60 seconds - Fix double free of ndlp object - Don't free mbox structures on error. The completion handlers expect to do so. - Clear host attention work items when going offline - Fixed discovery issues in multi-initiator environments. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 2 +- drivers/scsi/lpfc/lpfc_els.c | 15 ++++++++++++--- drivers/scsi/lpfc/lpfc_hbadisc.c | 3 +++ drivers/scsi/lpfc/lpfc_init.c | 1 + drivers/scsi/lpfc/lpfc_nportdisc.c | 22 +++++++++++++++++++++- 5 files changed, 38 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 76f8bd53e230..d384c16f4a87 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -222,7 +222,7 @@ lpfc_issue_lip(struct Scsi_Host *host) pmboxq->mb.mbxCommand = MBX_DOWN_LINK; pmboxq->mb.mbxOwner = OWN_HOST; - mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2); if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) { memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 60f5cca0abe9..3567de613162 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1848,9 +1848,12 @@ static void lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, struct lpfc_iocbq * rspiocb) { + IOCB_t *irsp; struct lpfc_nodelist *ndlp; LPFC_MBOXQ_t *mbox = NULL; + irsp = &rspiocb->iocb; + ndlp = (struct lpfc_nodelist *) cmdiocb->context1; if (cmdiocb->context_un.mbox) mbox = cmdiocb->context_un.mbox; @@ -1893,9 +1896,15 @@ lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, mempool_free( mbox, phba->mbox_mem_pool); } else { mempool_free( mbox, phba->mbox_mem_pool); - if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) { - lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); - ndlp = NULL; + /* Do not call NO_LIST for lpfc_els_abort'ed ELS cmds */ + if (!((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && + ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) || + (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) || + (irsp->un.ulpWord[4] == IOERR_SLI_DOWN)))) { + if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) { + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); + ndlp = NULL; + } } } } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 1c3f2689155b..b2f1552f1848 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1557,6 +1557,8 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp) mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; } } + + spin_lock_irq(phba->host->host_lock); list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) && (ndlp == (struct lpfc_nodelist *) mb->context2)) { @@ -1569,6 +1571,7 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp) mempool_free(mb, phba->mbox_mem_pool); } } + spin_unlock_irq(phba->host->host_lock); lpfc_els_abort(phba,ndlp,0); spin_lock_irq(phba->host->host_lock); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 16dc8c82b5ce..f6948ffe689a 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1379,6 +1379,7 @@ lpfc_offline(struct lpfc_hba * phba) /* stop all timers associated with this hba */ lpfc_stop_timer(phba); phba->work_hba_events = 0; + phba->work_ha = 0; lpfc_printf_log(phba, KERN_WARNING, diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index b38021a32c96..20449a8dd53d 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -393,6 +393,20 @@ lpfc_rcv_plogi(struct lpfc_hba * phba, mbox->context2 = ndlp; ndlp->nlp_flag |= (NLP_ACC_REGLOGIN | NLP_RCV_PLOGI); + /* + * If there is an outstanding PLOGI issued, abort it before + * sending ACC rsp for received PLOGI. If pending plogi + * is not canceled here, the plogi will be rejected by + * remote port and will be retried. On a configuration with + * single discovery thread, this will cause a huge delay in + * discovery. Also this will cause multiple state machines + * running in parallel for this node. + */ + if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) { + /* software abort outstanding PLOGI */ + lpfc_els_abort(phba, ndlp, 1); + } + lpfc_els_rsp_acc(phba, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox, 0); return 1; @@ -1601,7 +1615,13 @@ lpfc_rcv_padisc_npr_node(struct lpfc_hba * phba, lpfc_rcv_padisc(phba, ndlp, cmdiocb); - if (!(ndlp->nlp_flag & NLP_DELAY_TMO)) { + /* + * Do not start discovery if discovery is about to start + * or discovery in progress for this node. Starting discovery + * here will affect the counting of discovery threads. + */ + if ((!(ndlp->nlp_flag & NLP_DELAY_TMO)) && + (ndlp->nlp_flag & NLP_NPR_2B_DISC)){ if (ndlp->nlp_flag & NLP_NPR_ADISC) { ndlp->nlp_prev_state = NLP_STE_NPR_NODE; ndlp->nlp_state = NLP_STE_ADISC_ISSUE; -- cgit v1.2.2 From a90f56847e8df9034c1c05d1157e1b0cd96987fb Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 17 Aug 2006 11:58:04 -0400 Subject: [SCSI] lpfc 8.1.9 : Stall eh handlers if resetting while rport blocked Stall error handler if attempting resets/aborts while an rport is blocked. This avoids device offline scenarios due to errors in the error handler. Background: Although the transport is using the scsi_timed_out functionality to restart the timeout if the rport is blocked, if the timeout has already fired before the block occurs, the eh handler still runs and can take the device offline. Ultimately, this window cannot be resolved without significant work in the error handler thread. Christoph noted the first level of these issues when he noted the poor error response handling by the error thread. We found, under heavy load and error testing, that time window from when the scsi_times_out() adds the io to the queue to when the scsi_error_handler gets around to servicing it, can be in the several seconds range. In most cases, these test conditions are highly unusual, but possible. As a result, we're stalling the error handler in this race window so that we can avoid the device_offline transitions. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 0811c824e0e0..a8816a8738f8 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -21,6 +21,7 @@ #include #include +#include #include #include @@ -841,6 +842,21 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) return 0; } +static void +lpfc_block_error_handler(struct scsi_cmnd *cmnd) +{ + struct Scsi_Host *shost = cmnd->device->host; + struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); + + spin_lock_irq(shost->host_lock); + while (rport->port_state == FC_PORTSTATE_BLOCKED) { + spin_unlock_irq(shost->host_lock); + msleep(1000); + spin_lock_irq(shost->host_lock); + } + spin_unlock_irq(shost->host_lock); + return; +} static int lpfc_abort_handler(struct scsi_cmnd *cmnd) @@ -855,6 +871,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) unsigned int loop_count = 0; int ret = SUCCESS; + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble; @@ -957,6 +974,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) int ret = FAILED; int cnt, loopcnt; + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); /* * If target is not in a MAPPED state, delay the reset until @@ -1073,6 +1091,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) int cnt, loopcnt; struct lpfc_scsi_buf * lpfc_cmd; + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); lpfc_cmd = lpfc_get_scsi_buf(phba); -- cgit v1.2.2 From 48e2691f9c3bd6719e773f0b883449f4cef39585 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 17 Aug 2006 11:58:11 -0400 Subject: [SCSI] lpfc 8.1.9 : Change version number to 8.1.9 Change version number to 8.1.9 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index c7963f91d0a7..c7091ea29f3f 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.1.8" +#define LPFC_DRIVER_VERSION "8.1.9" #define LPFC_DRIVER_NAME "lpfc" -- cgit v1.2.2 From 864fe05dfa4ff3e230acf3b4ccf878b6f22603c4 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:57 -0700 Subject: [PATCH] 82596 section fixes WARNING: drivers/net/82596.o - Section mismatch: reference to .init.text:i82596_probe from .text between 'init_module' (at offset 0x141) and 'i596_add_cmd' Also nail a couple of crazy inlines. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/82596.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/82596.c b/drivers/net/82596.c index 7e2ca9571467..257d3bce3993 100644 --- a/drivers/net/82596.c +++ b/drivers/net/82596.c @@ -899,7 +899,7 @@ memory_squeeze: } -static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp) +static void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp) { struct i596_cmd *ptr; @@ -932,7 +932,8 @@ static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private lp->scb.cmd = I596_NULL; } -static inline void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) +static void i596_reset(struct net_device *dev, struct i596_private *lp, + int ioaddr) { unsigned long flags; @@ -1578,7 +1579,7 @@ static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "i82596 debug mask"); -int init_module(void) +int __init init_module(void) { if (debug >= 0) i596_debug = debug; @@ -1588,7 +1589,7 @@ int init_module(void) return 0; } -void cleanup_module(void) +void __exit cleanup_module(void) { unregister_netdev(dev_82596); #ifdef __mc68000__ -- cgit v1.2.2 From 62a87b8051ded3d1fcb89773c9febd1bb34d3cbd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:57 -0700 Subject: [PATCH] ac3200 section fixes WARNING: drivers/net/ac3200.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xf9) and 'ac_close_card' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ac3200.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ac3200.c b/drivers/net/ac3200.c index 7952dc6d77e3..0fbbcb75af69 100644 --- a/drivers/net/ac3200.c +++ b/drivers/net/ac3200.c @@ -370,8 +370,7 @@ MODULE_PARM_DESC(mem, "Memory base address(es)"); MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver"); MODULE_LICENSE("GPL"); -int -init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.2 From 5f3bc456ce190a963a8816be5a318df9998f3bc5 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:58 -0700 Subject: [PATCH] cops section fix WARNING: drivers/net/appletalk/cops.o - Section mismatch: reference to .init.text:cops_probe from .text between 'init_module' (at offset 0xae) and 'cops_rx' Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/appletalk/cops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 1d01ac0000e4..ae7f828344d9 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -1030,7 +1030,7 @@ module_param(io, int, 0); module_param(irq, int, 0); module_param(board_type, int, 0); -int init_module(void) +int __init init_module(void) { if (io == 0) printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n", -- cgit v1.2.2 From e26c129a49a7a4990f362a9cdb3084198b4d9d7b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:59 -0700 Subject: [PATCH] cs89x0 section fix WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.data:version from .text between 'init_module' (at offset 0x13d8) and 'net_get_stats' WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x1634) and 'net_get_stats' WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x1a1f) and 'net_get_stats' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/cs89x0.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 47eecce35fa4..2dcca79b1f6a 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -1905,8 +1905,7 @@ MODULE_LICENSE("GPL"); */ -int -init_module(void) +int __init init_module(void) { struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); struct net_local *lp; -- cgit v1.2.2 From 5d930108c914c04fbb0bfbb059d23a5fcaf0d1e7 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:59 -0700 Subject: [PATCH] at1700 section fix WARNING: drivers/net/at1700.o - Section mismatch: reference to .init.text:at1700_probe from .text between 'init_module' (at offset 0x75) and 'net_get_stats' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/at1700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c index 5d7929c79bce..4ca061c2d5b2 100644 --- a/drivers/net/at1700.c +++ b/drivers/net/at1700.c @@ -901,7 +901,7 @@ MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address"); MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number"); MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)"); -int init_module(void) +int __init init_module(void) { if (io == 0) printk("at1700: You should not use auto-probing with insmod!\n"); -- cgit v1.2.2 From d543cbb6d192313d9027ed09c7a1e085b1234082 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:00 -0700 Subject: [PATCH] e2100 section fix WARNING: drivers/net/e2100.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xd9) and 'e21_reset_8390' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e2100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/e2100.c b/drivers/net/e2100.c index e5c5cd2a2712..e4e733a380e3 100644 --- a/drivers/net/e2100.c +++ b/drivers/net/e2100.c @@ -425,8 +425,8 @@ MODULE_LICENSE("GPL"); /* This is set up so that only a single autoprobe takes place per call. ISA device autoprobes on a running machine are not recommended. */ -int -init_module(void) + +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.2 From 02a3245fcf0911ff92100aa54823dc1c5950fba9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:01 -0700 Subject: [PATCH] eepro section fix WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x284) and 'eepro_ethtool_get_drvinfo' WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x2a7) and 'eepro_ethtool_get_drvinfo' WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.data:eepro_portlist from .text between 'init_module' (at offset 0x2b3) and 'eepro_ethtool_get_drvinfo' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/eepro.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index 20d31430c74f..8dc61d65dd23 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1807,8 +1807,7 @@ MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)"); MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)"); MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)"); -int -init_module(void) +int __init init_module(void) { struct net_device *dev; int i; -- cgit v1.2.2 From b1176b95b4b851b05a2f541ef54e7ce3ed358d19 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:01 -0700 Subject: [PATCH] eexpress section fix WARNING: drivers/net/eexpress.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x6c3) and 'eexp_hw_lasttxstat' WARNING: drivers/net/eexpress.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x74f) and 'eexp_hw_lasttxstat' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/eexpress.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index 33291bcf6d4c..0701c1d810ca 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -1698,7 +1698,7 @@ MODULE_LICENSE("GPL"); * are specified, we verify and then use them. If no parameters are given, we * autoprobe for one card only. */ -int init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.2 From 5757f5c6d7d9cbe4bf6a464f1842a767f505d440 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:02 -0700 Subject: [PATCH] es3210 section fix WARNING: drivers/net/es3210.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xdf) and 'es_close' WARNING: drivers/net/es3210.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x100) and 'es_close' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/es3210.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/es3210.c b/drivers/net/es3210.c index 6b0ab1eac3fb..fd7b32a24ea4 100644 --- a/drivers/net/es3210.c +++ b/drivers/net/es3210.c @@ -421,8 +421,7 @@ MODULE_PARM_DESC(mem, "memory base address(es)"); MODULE_DESCRIPTION("Racal-Interlan ES3210 EISA ethernet driver"); MODULE_LICENSE("GPL"); -int -init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.2 From 58f149fc65ebced1148789cfb37457a8c7aaca75 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:03 -0700 Subject: [PATCH] eth16i section fix WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x6d2) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x6ef) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x702) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x70e) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x71d) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x729) and 'eth16i_multicast' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/eth16i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c index 4bf76f86d8e9..ca42efa9143c 100644 --- a/drivers/net/eth16i.c +++ b/drivers/net/eth16i.c @@ -1434,7 +1434,7 @@ MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto, module_param(debug, int, 0); MODULE_PARM_DESC(debug, "eth16i debug level (0-6)"); -int init_module(void) +int __init init_module(void) { int this_dev, found = 0; struct net_device *dev; -- cgit v1.2.2 From 3805f0e28ca313893b87e881201561d5c1857dd8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:03 -0700 Subject: [PATCH] lance section fix WARNING: drivers/net/lance.o - Section mismatch: reference to .init.data:lance_portlist from .text between 'init_module' (at offset 0x8d3) and 'lance_purge_ring' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/lance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/lance.c b/drivers/net/lance.c index c1c3452c90ca..5b4dbfe5fb77 100644 --- a/drivers/net/lance.c +++ b/drivers/net/lance.c @@ -326,7 +326,7 @@ MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)"); MODULE_PARM_DESC(irq, "LANCE/PCnet IRQ number (ignored for some devices)"); MODULE_PARM_DESC(lance_debug, "LANCE/PCnet debug level (0-7)"); -int init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.2 From dab3d02ec05d16aab680de471cb5d20c5d4852e8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:04 -0700 Subject: [PATCH] lne390 section fix WARNING: drivers/net/lne390.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x100) and 'lne390_close' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/lne390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/lne390.c b/drivers/net/lne390.c index 646e89fc3562..c0ec7f6abcb2 100644 --- a/drivers/net/lne390.c +++ b/drivers/net/lne390.c @@ -406,7 +406,7 @@ MODULE_PARM_DESC(mem, "memory base address(es)"); MODULE_DESCRIPTION("Mylex LNE390A/B EISA Ethernet driver"); MODULE_LICENSE("GPL"); -int init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.2 From 19a8664d8a05f75cab3cd4eb8022d22d3f0c53c3 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:05 -0700 Subject: [PATCH] ni52 section fix WARNING: drivers/net/ni52.o - Section mismatch: reference to .init.text:ni52_probe from .text between 'init_module' (at offset 0x997) and 'ni52_close' WARNING: drivers/net/ni65.o - Section mismatch: reference to .init.text:ni65_probe from .text between 'init_module' (at offset 0x54a) and 'ni65_stop_start' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ni52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c index fa854c8fde75..4d52ecf8af56 100644 --- a/drivers/net/ni52.c +++ b/drivers/net/ni52.c @@ -1323,7 +1323,7 @@ MODULE_PARM_DESC(irq, "NI5210 IRQ number,required"); MODULE_PARM_DESC(memstart, "NI5210 memory base address,required"); MODULE_PARM_DESC(memend, "NI5210 memory end address,required"); -int init_module(void) +int __init init_module(void) { if(io <= 0x0 || !memend || !memstart || irq < 2) { printk("ni52: Autoprobing not allowed for modules.\nni52: Set symbols 'io' 'irq' 'memstart' and 'memend'\n"); -- cgit v1.2.2 From 6d2cdb4fd1cc1b15ad070a57c9b2bc40bb1565e7 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:05 -0700 Subject: [PATCH] ibmtr section fix WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x6e6) and 'ibmtr_probe_card' WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x74a) and 'ibmtr_probe_card' WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x7fd) and 'ibmtr_probe_card' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tokenring/ibmtr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 9f491563944e..4470025ff7f8 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -140,7 +140,7 @@ in the event that chatty debug messages are desired - jjs 12/30/98 */ /* version and credits */ #ifndef PCMCIA -static char version[] __initdata = +static char version[] __devinitdata = "\nibmtr.c: v1.3.57 8/ 7/94 Peter De Schrijver and Mark Swanson\n" " v2.1.125 10/20/98 Paul Norton \n" " v2.2.0 12/30/98 Joel Sloan \n" @@ -216,7 +216,7 @@ static int __devinitdata turbo_irq[IBMTR_MAX_ADAPTERS] = {0}; static int __devinitdata turbo_searched = 0; #ifndef PCMCIA -static __u32 ibmtr_mem_base __initdata = 0xd0000; +static __u32 ibmtr_mem_base __devinitdata = 0xd0000; #endif static void __devinit PrtChanID(char *pcid, short stride) -- cgit v1.2.2 From daca7cd7612639848c39744e02dab537755b31a1 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:06 -0700 Subject: [PATCH] smctr section fix WARNING: drivers/net/tokenring/smctr.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x2ba0) and 'smctr_reset_adapter' WARNING: drivers/net/tokenring/smctr.o - Section mismatch: reference to .init.text:smctr_probe from .text between 'init_module' (at offset 0x2bf4) and 'smctr_reset_adapter' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tokenring/smctr.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index cd2e0251e2bc..85a7f797d343 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -5666,7 +5666,7 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param(ringspeed, int, 0); -static struct net_device *setup_card(int n) +static struct net_device * __init setup_card(int n) { struct net_device *dev = alloc_trdev(sizeof(struct net_local)); int err; @@ -5696,9 +5696,8 @@ out: free_netdev(dev); return ERR_PTR(err); } - -int init_module(void) +int __init init_module(void) { int i, found = 0; struct net_device *dev; -- cgit v1.2.2 From 5e5fa01d55e9949660a89b23f4a43884eaf49097 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:06 -0700 Subject: [PATCH] wd section fix WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xfd) and 'wd_open' WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x14b) and 'wd_open' WARNING: drivers/net/wd.o - Section mismatch: reference to .init.data:wd_portlist from .text between 'init_module' (at offset 0x17f) and 'wd_open' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wd.c b/drivers/net/wd.c index 7caa8dc88a58..b1ba1872f315 100644 --- a/drivers/net/wd.c +++ b/drivers/net/wd.c @@ -500,8 +500,8 @@ MODULE_LICENSE("GPL"); /* This is set up so that only a single autoprobe takes place per call. ISA device autoprobes on a running machine are not recommended. */ -int -init_module(void) + +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.2 From 1e13b0d82d24ac3c8b2f16a09dd9ce537cad134c Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:07 -0700 Subject: [PATCH] ni65 section fix WARNING: drivers/net/ni65.o - Section mismatch: reference to .init.text:ni65_probe from .text between 'init_module' (at offset 0x54a) and 'ni65_stop_start' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ni65.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c index bb42ff218484..810cc572f5f7 100644 --- a/drivers/net/ni65.c +++ b/drivers/net/ni65.c @@ -1253,7 +1253,7 @@ MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)"); MODULE_PARM_DESC(io, "ni6510 I/O base address"); MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)"); -int init_module(void) +int __init init_module(void) { dev_ni65 = ni65_probe(-1); return IS_ERR(dev_ni65) ? PTR_ERR(dev_ni65) : 0; -- cgit v1.2.2 From c971ef46cb94b8bb4a12555fa757e5f67934fcd9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:08 -0700 Subject: [PATCH] seeq8005 section fix WARNING: drivers/net/seeq8005.o - Section mismatch: reference to .init.text:seeq8005_probe from .text between 'init_module' (at offset 0x106) and 'seeq8005_open' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/seeq8005.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c index efd0f235020f..01392bca0223 100644 --- a/drivers/net/seeq8005.c +++ b/drivers/net/seeq8005.c @@ -742,7 +742,7 @@ module_param(irq, int, 0); MODULE_PARM_DESC(io, "SEEQ 8005 I/O base address"); MODULE_PARM_DESC(irq, "SEEQ 8005 IRQ number"); -int init_module(void) +int __init init_module(void) { dev_seeq = seeq8005_probe(-1); if (IS_ERR(dev_seeq)) -- cgit v1.2.2 From c9d26c9785d900d8547b268f0c0507f252879c48 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:08 -0700 Subject: [PATCH] winbond-840 section fix With CONFIG_HOTPLUG=n it won't compile: drivers/net/tulip/winbond-840.c:141: error: version causes a section type conflict (For some reason it gets the same error if marked __initdata. Give up.) Cc: Valerie Henson Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tulip/winbond-840.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index 7f414815cc62..eba9083da146 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -138,7 +138,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; #include /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker \n" KERN_INFO " http://www.scyld.com/network/drivers.html\n"; -- cgit v1.2.2 From 90d5aed2d9c7d2f3915b75342988114fd7b6c13d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:09 -0700 Subject: [PATCH] fealnx section fix With CONFIG_HOTPLUG=n it won't compile: distcc[25607] ERROR: compile drivers/net/fealnx.c on g5/64 failed version[] is referred to from both __init code and from __devinit code, so move it out of __init altogether. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/fealnx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index 97d34fee8c1f..567e27413cfd 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -92,7 +92,7 @@ static int full_duplex[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; #include /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE "\n"; -- cgit v1.2.2 From 3418e469ebaebec16f7df83074087eb901fb76b9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:10 -0700 Subject: [PATCH] sundance section fix drivers/net/sundance.c:110: error: version causes a section type conflict I don't understand this error. It's referred to from both __init and __devinit code. With CONFIG_HOTPLUG=n, version[] is placed in .init.data and is referred to from .init.text. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index ac17377b3e9f..698568e751da 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -107,7 +107,7 @@ static char *media[MAX_UNITS]; #endif /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n" KERN_INFO " http://www.scyld.com/network/sundance.html\n"; -- cgit v1.2.2 From e4c780b1ffc7d7bc27b7dc57fcf17ebb8d3006bc Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 14 Aug 2006 23:00:10 -0700 Subject: [PATCH] drivers/net/e1000/: possible cleanups - make needlessly global functions static - #if 0 the following unused global functions: - e1000_hw.c: e1000_mc_addr_list_update() - e1000_hw.c: e1000_read_reg_io() - e1000_hw.c: e1000_enable_pciex_master() - e1000_hw.c: e1000_ife_disable_dynamic_power_down() - e1000_hw.c: e1000_ife_enable_dynamic_power_down() - e1000_hw.c: e1000_write_ich8_word() - e1000_hw.c: e1000_duplex_reversal() - e1000_main.c: e1000_io_read() Signed-off-by: Adrian Bunk Cc: John Ronciak Cc: Jesse Brandeburg Cc: Jeff Kirsher Cc: Auke Kok Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_hw.c | 89 ++++++++++++++++++++++++++++++------------ drivers/net/e1000/e1000_hw.h | 32 --------------- drivers/net/e1000/e1000_main.c | 2 + 3 files changed, 67 insertions(+), 56 deletions(-) diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 583518ae49ce..b3b919116e0f 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -105,6 +105,33 @@ static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex); static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw); +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, + uint32_t segment); +static int32_t e1000_get_software_flag(struct e1000_hw *hw); +static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); +static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); +static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t* data); +static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, + uint16_t *data); +static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, + uint16_t *data); +static void e1000_release_software_flag(struct e1000_hw *hw); +static void e1000_release_software_semaphore(struct e1000_hw *hw); +static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, + uint32_t no_snoop); +static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, + uint32_t index, uint8_t byte); +static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t data); +static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, + uint16_t data); + /* IGP cable length table */ static const uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = @@ -3233,7 +3260,7 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw) return data; } -int32_t +static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) { uint32_t swfw_sync = 0; @@ -3277,7 +3304,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) return E1000_SUCCESS; } -void +static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask) { uint32_t swfw_sync; @@ -3575,7 +3602,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, return E1000_SUCCESS; } -int32_t +static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data) @@ -3608,7 +3635,7 @@ e1000_read_kmrn_reg(struct e1000_hw *hw, return E1000_SUCCESS; } -int32_t +static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data) @@ -3839,7 +3866,7 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw) * * hw - struct containing variables accessed by shared code ******************************************************************************/ -int32_t +static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) { int32_t ret_val; @@ -4086,7 +4113,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * phy_info - PHY information structure ******************************************************************************/ -int32_t +static int32_t e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { @@ -5643,6 +5670,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw) * for the first 15 multicast addresses, and hashes the rest into the * multicast table. *****************************************************************************/ +#if 0 void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t *mc_addr_list, @@ -5719,6 +5747,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, } DEBUGOUT("MC Update Complete\n"); } +#endif /* 0 */ /****************************************************************************** * Hashes an address to determine its location in the multicast table @@ -6587,6 +6616,7 @@ e1000_get_bus_info(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code * offset - offset to read from *****************************************************************************/ +#if 0 uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset) @@ -6597,6 +6627,7 @@ e1000_read_reg_io(struct e1000_hw *hw, e1000_io_write(hw, io_addr, offset); return e1000_io_read(hw, io_data); } +#endif /* 0 */ /****************************************************************************** * Writes a value to one of the devices registers using port I/O (as opposed to @@ -7909,6 +7940,7 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) * returns: - none. * ***************************************************************************/ +#if 0 void e1000_enable_pciex_master(struct e1000_hw *hw) { @@ -7923,6 +7955,7 @@ e1000_enable_pciex_master(struct e1000_hw *hw) ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; E1000_WRITE_REG(hw, CTRL, ctrl); } +#endif /* 0 */ /******************************************************************************* * @@ -8148,7 +8181,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ***************************************************************************/ -int32_t +static int32_t e1000_get_software_semaphore(struct e1000_hw *hw) { int32_t timeout = hw->eeprom.word_size + 1; @@ -8183,7 +8216,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -void +static void e1000_release_software_semaphore(struct e1000_hw *hw) { uint32_t swsm; @@ -8265,7 +8298,7 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) * returns: E1000_SUCCESS * *****************************************************************************/ -int32_t +static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop) { uint32_t gcr_reg = 0; @@ -8306,7 +8339,7 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -int32_t +static int32_t e1000_get_software_flag(struct e1000_hw *hw) { int32_t timeout = PHY_CFG_TIMEOUT; @@ -8345,7 +8378,7 @@ e1000_get_software_flag(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -void +static void e1000_release_software_flag(struct e1000_hw *hw) { uint32_t extcnf_ctrl; @@ -8369,6 +8402,7 @@ e1000_release_software_flag(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ +#if 0 int32_t e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) { @@ -8388,6 +8422,7 @@ e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) return ret_val; } +#endif /* 0 */ /*************************************************************************** * @@ -8397,6 +8432,7 @@ e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ +#if 0 int32_t e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) { @@ -8416,6 +8452,7 @@ e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) return ret_val; } +#endif /* 0 */ /****************************************************************************** * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access @@ -8426,7 +8463,7 @@ e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -int32_t +static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data) { @@ -8482,7 +8519,7 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, * words - number of words to write * data - words to write to the EEPROM *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data) { @@ -8529,7 +8566,7 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, * * hw - The pointer to the hw structure ****************************************************************************/ -int32_t +static int32_t e1000_ich8_cycle_init(struct e1000_hw *hw) { union ich8_hws_flash_status hsfsts; @@ -8596,7 +8633,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) * * hw - The pointer to the hw structure ****************************************************************************/ -int32_t +static int32_t e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout) { union ich8_hws_flash_ctrl hsflctl; @@ -8631,7 +8668,7 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout) * size - Size of data to read, 1=byte 2=word * data - Pointer to the word to store the value read. *****************************************************************************/ -int32_t +static int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t* data) { @@ -8710,7 +8747,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, * size - Size of data to read, 1=byte 2=word * data - The byte(s) to write to the NVM. *****************************************************************************/ -int32_t +static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t data) { @@ -8785,7 +8822,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, * index - The index of the byte to read. * data - Pointer to a byte to store the value read. *****************************************************************************/ -int32_t +static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data) { int32_t status = E1000_SUCCESS; @@ -8808,7 +8845,7 @@ e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data) * index - The index of the byte to write. * byte - The byte to write to the NVM. *****************************************************************************/ -int32_t +static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte) { int32_t error = E1000_SUCCESS; @@ -8839,7 +8876,7 @@ e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte) * index - The index of the byte to read. * data - The byte to write to the NVM. *****************************************************************************/ -int32_t +static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data) { int32_t status = E1000_SUCCESS; @@ -8857,7 +8894,7 @@ e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data) * index - The starting byte index of the word to read. * data - Pointer to a word to store the value read. *****************************************************************************/ -int32_t +static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) { int32_t status = E1000_SUCCESS; @@ -8872,6 +8909,7 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) * index - The starting byte index of the word to read. * data - The word to write to the NVM. *****************************************************************************/ +#if 0 int32_t e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) { @@ -8879,6 +8917,7 @@ e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) status = e1000_write_ich8_data(hw, index, 2, data); return status; } +#endif /* 0 */ /****************************************************************************** * Erases the bank specified. Each bank is a 4k block. Segments are 0 based. @@ -8887,7 +8926,7 @@ e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) * hw - pointer to e1000_hw structure * segment - 0 for first segment, 1 for second segment, etc. *****************************************************************************/ -int32_t +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) { union ich8_hws_flash_status hsfsts; @@ -8984,6 +9023,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) * hw: Struct containing variables accessed by shared code * *****************************************************************************/ +#if 0 int32_t e1000_duplex_reversal(struct e1000_hw *hw) { @@ -9012,8 +9052,9 @@ e1000_duplex_reversal(struct e1000_hw *hw) return ret_val; } +#endif /* 0 */ -int32_t +static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size) { @@ -9047,7 +9088,7 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, } -int32_t +static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw) { uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop; diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index f9341e3276b3..375b95518c31 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -323,13 +323,8 @@ int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t dat int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); void e1000_phy_powerdown_workaround(struct e1000_hw *hw); -int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); -int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size); -int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); -int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data); -int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); /* EEPROM Functions */ int32_t e1000_init_eeprom_params(struct e1000_hw *hw); @@ -400,13 +395,8 @@ int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); -int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); -void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); -void e1000_release_software_flag(struct e1000_hw *hw); -int32_t e1000_get_software_flag(struct e1000_hw *hw); /* Filters (multicast, vlan, receive) */ -void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count); uint32_t e1000_hash_mc_addr(struct e1000_hw *hw, uint8_t * mc_addr); void e1000_mta_set(struct e1000_hw *hw, uint32_t hash_value); void e1000_rar_set(struct e1000_hw *hw, uint8_t * mc_addr, uint32_t rar_index); @@ -431,31 +421,9 @@ void e1000_pci_clear_mwi(struct e1000_hw *hw); void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); /* Port I/O is only supported on 82544 and newer */ -uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port); -uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset); void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value); -void e1000_enable_pciex_master(struct e1000_hw *hw); int32_t e1000_disable_pciex_master(struct e1000_hw *hw); -int32_t e1000_get_software_semaphore(struct e1000_hw *hw); -void e1000_release_software_semaphore(struct e1000_hw *hw); int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); -int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); - -int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t *data); -int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t byte); -int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t byte); -int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, - uint16_t *data); -int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, - uint32_t size, uint16_t *data); -int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment); #define E1000_READ_REG_IO(a, reg) \ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 627f224d78bc..726f43d55937 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4386,11 +4386,13 @@ e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) pci_write_config_word(adapter->pdev, reg, *value); } +#if 0 uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port) { return inl(port); } +#endif /* 0 */ void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value) -- cgit v1.2.2 From ce973b141dfac4a0f160c7435d65e3ea47753ce8 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Mon, 14 Aug 2006 23:00:11 -0700 Subject: [PATCH] Freescale QE UCC gigabit ethernet driver QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: Shlomi Gridish Signed-off-by: Li Yang Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 27 + drivers/net/Makefile | 3 + drivers/net/ucc_geth.c | 4278 ++++++++++++++++++++++++++++++++++++++++++++ drivers/net/ucc_geth.h | 1339 ++++++++++++++ drivers/net/ucc_geth_phy.c | 801 +++++++++ drivers/net/ucc_geth_phy.h | 217 +++ 6 files changed, 6665 insertions(+) create mode 100644 drivers/net/ucc_geth.c create mode 100644 drivers/net/ucc_geth.h create mode 100644 drivers/net/ucc_geth_phy.c create mode 100644 drivers/net/ucc_geth_phy.h diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 39189903e355..ea1796e767b7 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2219,6 +2219,33 @@ config GFAR_NAPI bool "NAPI Support" depends on GIANFAR +config UCC_GETH + tristate "Freescale QE UCC GETH" + depends on QUICC_ENGINE && UCC_FAST + help + This driver supports the Gigabit Ethernet mode of QE UCC. + QE can be found on MPC836x CPUs. + +config UGETH_NAPI + bool "NAPI Support" + depends on UCC_GETH + +config UGETH_MAGIC_PACKET + bool "Magic Packet detection support" + depends on UCC_GETH + +config UGETH_FILTERING + bool "Mac address filtering support" + depends on UCC_GETH + +config UGETH_TX_ON_DEMOND + bool "Transmit on Demond support" + depends on UCC_GETH + +config UGETH_HAS_GIGA + bool + depends on UCC_GETH && MPC836x + config MV643XX_ETH tristate "MV-643XX Ethernet support" depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c91e95126f78..8427bf9dec9d 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -18,6 +18,9 @@ gianfar_driver-objs := gianfar.o \ gianfar_mii.o \ gianfar_sysfs.o +obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o +ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o + # # link order important here # diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c new file mode 100644 index 000000000000..47f49ef72bdc --- /dev/null +++ b/drivers/net/ucc_geth.c @@ -0,0 +1,4278 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Shlomi Gridish + * + * Description: + * QE UCC Gigabit Ethernet Driver + * + * Changelog: + * Jul 6, 2006 Li Yang + * - Rearrange code and style fixes + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "ucc_geth.h" +#include "ucc_geth_phy.h" + +#undef DEBUG + +#define DRV_DESC "QE UCC Gigabit Ethernet Controller version:June 20, 2006" +#define DRV_NAME "ucc_geth" + +#define ugeth_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define ugeth_dbg(format, arg...) \ + ugeth_printk(KERN_DEBUG , format , ## arg) +#define ugeth_err(format, arg...) \ + ugeth_printk(KERN_ERR , format , ## arg) +#define ugeth_info(format, arg...) \ + ugeth_printk(KERN_INFO , format , ## arg) +#define ugeth_warn(format, arg...) \ + ugeth_printk(KERN_WARNING , format , ## arg) + +#ifdef UGETH_VERBOSE_DEBUG +#define ugeth_vdbg ugeth_dbg +#else +#define ugeth_vdbg(fmt, args...) do { } while (0) +#endif /* UGETH_VERBOSE_DEBUG */ + +static DEFINE_SPINLOCK(ugeth_lock); + +static ucc_geth_info_t ugeth_primary_info = { + .uf_info = { + .bd_mem_part = MEM_PART_SYSTEM, + .rtsm = UCC_FAST_SEND_IDLES_BETWEEN_FRAMES, + .max_rx_buf_length = 1536, +/* FIXME: should be changed in run time for 1G and 100M */ +#ifdef CONFIG_UGETH_HAS_GIGA + .urfs = UCC_GETH_URFS_GIGA_INIT, + .urfet = UCC_GETH_URFET_GIGA_INIT, + .urfset = UCC_GETH_URFSET_GIGA_INIT, + .utfs = UCC_GETH_UTFS_GIGA_INIT, + .utfet = UCC_GETH_UTFET_GIGA_INIT, + .utftt = UCC_GETH_UTFTT_GIGA_INIT, +#else + .urfs = UCC_GETH_URFS_INIT, + .urfet = UCC_GETH_URFET_INIT, + .urfset = UCC_GETH_URFSET_INIT, + .utfs = UCC_GETH_UTFS_INIT, + .utfet = UCC_GETH_UTFET_INIT, + .utftt = UCC_GETH_UTFTT_INIT, +#endif + .ufpt = 256, + .mode = UCC_FAST_PROTOCOL_MODE_ETHERNET, + .ttx_trx = UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL, + .tenc = UCC_FAST_TX_ENCODING_NRZ, + .renc = UCC_FAST_RX_ENCODING_NRZ, + .tcrc = UCC_FAST_16_BIT_CRC, + .synl = UCC_FAST_SYNC_LEN_NOT_USED, + }, + .numQueuesTx = 1, + .numQueuesRx = 1, + .extendedFilteringChainPointer = ((uint32_t) NULL), + .typeorlen = 3072 /*1536 */ , + .nonBackToBackIfgPart1 = 0x40, + .nonBackToBackIfgPart2 = 0x60, + .miminumInterFrameGapEnforcement = 0x50, + .backToBackInterFrameGap = 0x60, + .mblinterval = 128, + .nortsrbytetime = 5, + .fracsiz = 1, + .strictpriorityq = 0xff, + .altBebTruncation = 0xa, + .excessDefer = 1, + .maxRetransmission = 0xf, + .collisionWindow = 0x37, + .receiveFlowControl = 1, + .maxGroupAddrInHash = 4, + .maxIndAddrInHash = 4, + .prel = 7, + .maxFrameLength = 1518, + .minFrameLength = 64, + .maxD1Length = 1520, + .maxD2Length = 1520, + .vlantype = 0x8100, + .ecamptr = ((uint32_t) NULL), + .eventRegMask = UCCE_OTHER, + .pausePeriod = 0xf000, + .interruptcoalescingmaxvalue = {1, 1, 1, 1, 1, 1, 1, 1}, + .bdRingLenTx = { + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN}, + + .bdRingLenRx = { + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN}, + + .numStationAddresses = UCC_GETH_NUM_OF_STATION_ADDRESSES_1, + .largestexternallookupkeysize = + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE, + .statisticsMode = UCC_GETH_STATISTICS_GATHERING_MODE_NONE, + .vlanOperationTagged = UCC_GETH_VLAN_OPERATION_TAGGED_NOP, + .vlanOperationNonTagged = UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP, + .rxQoSMode = UCC_GETH_QOS_MODE_DEFAULT, + .aufc = UPSMR_AUTOMATIC_FLOW_CONTROL_MODE_NONE, + .padAndCrc = MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC, + .numThreadsTx = UCC_GETH_NUM_OF_THREADS_4, + .numThreadsRx = UCC_GETH_NUM_OF_THREADS_4, + .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, + .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, +}; + +static ucc_geth_info_t ugeth_info[8]; + +#ifdef DEBUG +static void mem_disp(u8 *addr, int size) +{ + u8 *i; + int size16Aling = (size >> 4) << 4; + int size4Aling = (size >> 2) << 2; + int notAlign = 0; + if (size % 16) + notAlign = 1; + + for (i = addr; (u32) i < (u32) addr + size16Aling; i += 16) + printk("0x%08x: %08x %08x %08x %08x\r\n", + (u32) i, + *((u32 *) (i)), + *((u32 *) (i + 4)), + *((u32 *) (i + 8)), *((u32 *) (i + 12))); + if (notAlign == 1) + printk("0x%08x: ", (u32) i); + for (; (u32) i < (u32) addr + size4Aling; i += 4) + printk("%08x ", *((u32 *) (i))); + for (; (u32) i < (u32) addr + size; i++) + printk("%02x", *((u8 *) (i))); + if (notAlign == 1) + printk("\r\n"); +} +#endif /* DEBUG */ + +#ifdef CONFIG_UGETH_FILTERING +static void enqueue(struct list_head *node, struct list_head *lh) +{ + unsigned long flags; + + spin_lock_irqsave(ugeth_lock, flags); + list_add_tail(node, lh); + spin_unlock_irqrestore(ugeth_lock, flags); +} +#endif /* CONFIG_UGETH_FILTERING */ + +static struct list_head *dequeue(struct list_head *lh) +{ + unsigned long flags; + + spin_lock_irqsave(ugeth_lock, flags); + if (!list_empty(lh)) { + struct list_head *node = lh->next; + list_del(node); + spin_unlock_irqrestore(ugeth_lock, flags); + return node; + } else { + spin_unlock_irqrestore(ugeth_lock, flags); + return NULL; + } +} + +static int get_interface_details(enet_interface_e enet_interface, + enet_speed_e *speed, + int *r10m, + int *rmm, + int *rpm, + int *tbi, int *limited_to_full_duplex) +{ + /* Analyze enet_interface according to Interface Mode + Configuration table */ + switch (enet_interface) { + case ENET_10_MII: + *speed = ENET_SPEED_10BT; + break; + case ENET_10_RMII: + *speed = ENET_SPEED_10BT; + *r10m = 1; + *rmm = 1; + break; + case ENET_10_RGMII: + *speed = ENET_SPEED_10BT; + *rpm = 1; + *r10m = 1; + *limited_to_full_duplex = 1; + break; + case ENET_100_MII: + *speed = ENET_SPEED_100BT; + break; + case ENET_100_RMII: + *speed = ENET_SPEED_100BT; + *rmm = 1; + break; + case ENET_100_RGMII: + *speed = ENET_SPEED_100BT; + *rpm = 1; + *limited_to_full_duplex = 1; + break; + case ENET_1000_GMII: + *speed = ENET_SPEED_1000BT; + *limited_to_full_duplex = 1; + break; + case ENET_1000_RGMII: + *speed = ENET_SPEED_1000BT; + *rpm = 1; + *limited_to_full_duplex = 1; + break; + case ENET_1000_TBI: + *speed = ENET_SPEED_1000BT; + *tbi = 1; + *limited_to_full_duplex = 1; + break; + case ENET_1000_RTBI: + *speed = ENET_SPEED_1000BT; + *rpm = 1; + *tbi = 1; + *limited_to_full_duplex = 1; + break; + default: + return -EINVAL; + break; + } + + return 0; +} + +static struct sk_buff *get_new_skb(ucc_geth_private_t *ugeth, u8 *bd) +{ + struct sk_buff *skb = NULL; + + skb = dev_alloc_skb(ugeth->ug_info->uf_info.max_rx_buf_length + + UCC_GETH_RX_DATA_BUF_ALIGNMENT); + + if (skb == NULL) + return NULL; + + /* We need the data buffer to be aligned properly. We will reserve + * as many bytes as needed to align the data properly + */ + skb_reserve(skb, + UCC_GETH_RX_DATA_BUF_ALIGNMENT - + (((unsigned)skb->data) & (UCC_GETH_RX_DATA_BUF_ALIGNMENT - + 1))); + + skb->dev = ugeth->dev; + + BD_BUFFER_SET(bd, + dma_map_single(NULL, + skb->data, + ugeth->ug_info->uf_info.max_rx_buf_length + + UCC_GETH_RX_DATA_BUF_ALIGNMENT, + DMA_FROM_DEVICE)); + + BD_STATUS_AND_LENGTH_SET(bd, + (R_E | R_I | + (BD_STATUS_AND_LENGTH(bd) & R_W))); + + return skb; +} + +static int rx_bd_buffer_set(ucc_geth_private_t *ugeth, u8 rxQ) +{ + u8 *bd; + u32 bd_status; + struct sk_buff *skb; + int i; + + bd = ugeth->p_rx_bd_ring[rxQ]; + i = 0; + + do { + bd_status = BD_STATUS_AND_LENGTH(bd); + skb = get_new_skb(ugeth, bd); + + if (!skb) /* If can not allocate data buffer, + abort. Cleanup will be elsewhere */ + return -ENOMEM; + + ugeth->rx_skbuff[rxQ][i] = skb; + + /* advance the BD pointer */ + bd += UCC_GETH_SIZE_OF_BD; + i++; + } while (!(bd_status & R_W)); + + return 0; +} + +static int fill_init_enet_entries(ucc_geth_private_t *ugeth, + volatile u32 *p_start, + u8 num_entries, + u32 thread_size, + u32 thread_alignment, + qe_risc_allocation_e risc, + int skip_page_for_first_entry) +{ + u32 init_enet_offset; + u8 i; + int snum; + + for (i = 0; i < num_entries; i++) { + if ((snum = qe_get_snum()) < 0) { + ugeth_err("fill_init_enet_entries: Can not get SNUM."); + return snum; + } + if ((i == 0) && skip_page_for_first_entry) + /* First entry of Rx does not have page */ + init_enet_offset = 0; + else { + init_enet_offset = + qe_muram_alloc(thread_size, thread_alignment); + if (IS_MURAM_ERR(init_enet_offset)) { + ugeth_err + ("fill_init_enet_entries: Can not allocate DPRAM memory."); + qe_put_snum((u8) snum); + return -ENOMEM; + } + } + *(p_start++) = + ((u8) snum << ENET_INIT_PARAM_SNUM_SHIFT) | init_enet_offset + | risc; + } + + return 0; +} + +static int return_init_enet_entries(ucc_geth_private_t *ugeth, + volatile u32 *p_start, + u8 num_entries, + qe_risc_allocation_e risc, + int skip_page_for_first_entry) +{ + u32 init_enet_offset; + u8 i; + int snum; + + for (i = 0; i < num_entries; i++) { + /* Check that this entry was actually valid -- + needed in case failed in allocations */ + if ((*p_start & ENET_INIT_PARAM_RISC_MASK) == risc) { + snum = + (u32) (*p_start & ENET_INIT_PARAM_SNUM_MASK) >> + ENET_INIT_PARAM_SNUM_SHIFT; + qe_put_snum((u8) snum); + if (!((i == 0) && skip_page_for_first_entry)) { + /* First entry of Rx does not have page */ + init_enet_offset = + (in_be32(p_start) & + ENET_INIT_PARAM_PTR_MASK); + qe_muram_free(init_enet_offset); + } + *(p_start++) = 0; /* Just for cosmetics */ + } + } + + return 0; +} + +#ifdef DEBUG +static int dump_init_enet_entries(ucc_geth_private_t *ugeth, + volatile u32 *p_start, + u8 num_entries, + u32 thread_size, + qe_risc_allocation_e risc, + int skip_page_for_first_entry) +{ + u32 init_enet_offset; + u8 i; + int snum; + + for (i = 0; i < num_entries; i++) { + /* Check that this entry was actually valid -- + needed in case failed in allocations */ + if ((*p_start & ENET_INIT_PARAM_RISC_MASK) == risc) { + snum = + (u32) (*p_start & ENET_INIT_PARAM_SNUM_MASK) >> + ENET_INIT_PARAM_SNUM_SHIFT; + qe_put_snum((u8) snum); + if (!((i == 0) && skip_page_for_first_entry)) { + /* First entry of Rx does not have page */ + init_enet_offset = + (in_be32(p_start) & + ENET_INIT_PARAM_PTR_MASK); + ugeth_info("Init enet entry %d:", i); + ugeth_info("Base address: 0x%08x", + (u32) + qe_muram_addr(init_enet_offset)); + mem_disp(qe_muram_addr(init_enet_offset), + thread_size); + } + p_start++; + } + } + + return 0; +} +#endif + +#ifdef CONFIG_UGETH_FILTERING +static enet_addr_container_t *get_enet_addr_container(void) +{ + enet_addr_container_t *enet_addr_cont; + + /* allocate memory */ + enet_addr_cont = kmalloc(sizeof(enet_addr_container_t), GFP_KERNEL); + if (!enet_addr_cont) { + ugeth_err("%s: No memory for enet_addr_container_t object.", + __FUNCTION__); + return NULL; + } + + return enet_addr_cont; +} +#endif /* CONFIG_UGETH_FILTERING */ + +static void put_enet_addr_container(enet_addr_container_t *enet_addr_cont) +{ + kfree(enet_addr_cont); +} + +#ifdef CONFIG_UGETH_FILTERING +static int hw_add_addr_in_paddr(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr, u8 paddr_num) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + + if (!(paddr_num < NUM_OF_PADDRS)) { + ugeth_warn("%s: Illagel paddr_num.", __FUNCTION__); + return -EINVAL; + } + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + /* Ethernet frames are defined in Little Endian mode, */ + /* therefore to insert the address we reverse the bytes. */ + out_be16(&p_82xx_addr_filt->paddr[paddr_num].h, + (u16) (((u16) (((u16) ((*p_enet_addr)[5])) << 8)) | + (u16) (*p_enet_addr)[4])); + out_be16(&p_82xx_addr_filt->paddr[paddr_num].m, + (u16) (((u16) (((u16) ((*p_enet_addr)[3])) << 8)) | + (u16) (*p_enet_addr)[2])); + out_be16(&p_82xx_addr_filt->paddr[paddr_num].l, + (u16) (((u16) (((u16) ((*p_enet_addr)[1])) << 8)) | + (u16) (*p_enet_addr)[0])); + + return 0; +} +#endif /* CONFIG_UGETH_FILTERING */ + +static int hw_clear_addr_in_paddr(ucc_geth_private_t *ugeth, u8 paddr_num) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + + if (!(paddr_num < NUM_OF_PADDRS)) { + ugeth_warn("%s: Illagel paddr_num.", __FUNCTION__); + return -EINVAL; + } + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + /* Writing address ff.ff.ff.ff.ff.ff disables address + recognition for this register */ + out_be16(&p_82xx_addr_filt->paddr[paddr_num].h, 0xffff); + out_be16(&p_82xx_addr_filt->paddr[paddr_num].m, 0xffff); + out_be16(&p_82xx_addr_filt->paddr[paddr_num].l, 0xffff); + + return 0; +} + +static void hw_add_addr_in_hash(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + u32 cecr_subblock; + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + + /* Ethernet frames are defined in Little Endian mode, + therefor to insert */ + /* the address to the hash (Big Endian mode), we reverse the bytes.*/ + out_be16(&p_82xx_addr_filt->taddr.h, + (u16) (((u16) (((u16) ((*p_enet_addr)[5])) << 8)) | + (u16) (*p_enet_addr)[4])); + out_be16(&p_82xx_addr_filt->taddr.m, + (u16) (((u16) (((u16) ((*p_enet_addr)[3])) << 8)) | + (u16) (*p_enet_addr)[2])); + out_be16(&p_82xx_addr_filt->taddr.l, + (u16) (((u16) (((u16) ((*p_enet_addr)[1])) << 8)) | + (u16) (*p_enet_addr)[0])); + + qe_issue_cmd(QE_SET_GROUP_ADDRESS, cecr_subblock, + (u8) QE_CR_PROTOCOL_ETHERNET, 0); +} + +#ifdef CONFIG_UGETH_MAGIC_PACKET +static void magic_packet_detection_enable(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + ucc_geth_t *ug_regs; + u32 maccfg2, uccm; + + uccf = ugeth->uccf; + ug_regs = ugeth->ug_regs; + + /* Enable interrupts for magic packet detection */ + uccm = in_be32(uccf->p_uccm); + uccm |= UCCE_MPD; + out_be32(uccf->p_uccm, uccm); + + /* Enable magic packet detection */ + maccfg2 = in_be32(&ug_regs->maccfg2); + maccfg2 |= MACCFG2_MPE; + out_be32(&ug_regs->maccfg2, maccfg2); +} + +static void magic_packet_detection_disable(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + ucc_geth_t *ug_regs; + u32 maccfg2, uccm; + + uccf = ugeth->uccf; + ug_regs = ugeth->ug_regs; + + /* Disable interrupts for magic packet detection */ + uccm = in_be32(uccf->p_uccm); + uccm &= ~UCCE_MPD; + out_be32(uccf->p_uccm, uccm); + + /* Disable magic packet detection */ + maccfg2 = in_be32(&ug_regs->maccfg2); + maccfg2 &= ~MACCFG2_MPE; + out_be32(&ug_regs->maccfg2, maccfg2); +} +#endif /* MAGIC_PACKET */ + +static inline int compare_addr(enet_addr_t *addr1, enet_addr_t *addr2) +{ + return memcmp(addr1, addr2, ENET_NUM_OCTETS_PER_ADDRESS); +} + +#ifdef DEBUG +static void get_statistics(ucc_geth_private_t *ugeth, + ucc_geth_tx_firmware_statistics_t * + tx_firmware_statistics, + ucc_geth_rx_firmware_statistics_t * + rx_firmware_statistics, + ucc_geth_hardware_statistics_t *hardware_statistics) +{ + ucc_fast_t *uf_regs; + ucc_geth_t *ug_regs; + ucc_geth_tx_firmware_statistics_pram_t *p_tx_fw_statistics_pram; + ucc_geth_rx_firmware_statistics_pram_t *p_rx_fw_statistics_pram; + + ug_regs = ugeth->ug_regs; + uf_regs = (ucc_fast_t *) ug_regs; + p_tx_fw_statistics_pram = ugeth->p_tx_fw_statistics_pram; + p_rx_fw_statistics_pram = ugeth->p_rx_fw_statistics_pram; + + /* Tx firmware only if user handed pointer and driver actually + gathers Tx firmware statistics */ + if (tx_firmware_statistics && p_tx_fw_statistics_pram) { + tx_firmware_statistics->sicoltx = + in_be32(&p_tx_fw_statistics_pram->sicoltx); + tx_firmware_statistics->mulcoltx = + in_be32(&p_tx_fw_statistics_pram->mulcoltx); + tx_firmware_statistics->latecoltxfr = + in_be32(&p_tx_fw_statistics_pram->latecoltxfr); + tx_firmware_statistics->frabortduecol = + in_be32(&p_tx_fw_statistics_pram->frabortduecol); + tx_firmware_statistics->frlostinmactxer = + in_be32(&p_tx_fw_statistics_pram->frlostinmactxer); + tx_firmware_statistics->carriersenseertx = + in_be32(&p_tx_fw_statistics_pram->carriersenseertx); + tx_firmware_statistics->frtxok = + in_be32(&p_tx_fw_statistics_pram->frtxok); + tx_firmware_statistics->txfrexcessivedefer = + in_be32(&p_tx_fw_statistics_pram->txfrexcessivedefer); + tx_firmware_statistics->txpkts256 = + in_be32(&p_tx_fw_statistics_pram->txpkts256); + tx_firmware_statistics->txpkts512 = + in_be32(&p_tx_fw_statistics_pram->txpkts512); + tx_firmware_statistics->txpkts1024 = + in_be32(&p_tx_fw_statistics_pram->txpkts1024); + tx_firmware_statistics->txpktsjumbo = + in_be32(&p_tx_fw_statistics_pram->txpktsjumbo); + } + + /* Rx firmware only if user handed pointer and driver actually + * gathers Rx firmware statistics */ + if (rx_firmware_statistics && p_rx_fw_statistics_pram) { + int i; + rx_firmware_statistics->frrxfcser = + in_be32(&p_rx_fw_statistics_pram->frrxfcser); + rx_firmware_statistics->fraligner = + in_be32(&p_rx_fw_statistics_pram->fraligner); + rx_firmware_statistics->inrangelenrxer = + in_be32(&p_rx_fw_statistics_pram->inrangelenrxer); + rx_firmware_statistics->outrangelenrxer = + in_be32(&p_rx_fw_statistics_pram->outrangelenrxer); + rx_firmware_statistics->frtoolong = + in_be32(&p_rx_fw_statistics_pram->frtoolong); + rx_firmware_statistics->runt = + in_be32(&p_rx_fw_statistics_pram->runt); + rx_firmware_statistics->verylongevent = + in_be32(&p_rx_fw_statistics_pram->verylongevent); + rx_firmware_statistics->symbolerror = + in_be32(&p_rx_fw_statistics_pram->symbolerror); + rx_firmware_statistics->dropbsy = + in_be32(&p_rx_fw_statistics_pram->dropbsy); + for (i = 0; i < 0x8; i++) + rx_firmware_statistics->res0[i] = + p_rx_fw_statistics_pram->res0[i]; + rx_firmware_statistics->mismatchdrop = + in_be32(&p_rx_fw_statistics_pram->mismatchdrop); + rx_firmware_statistics->underpkts = + in_be32(&p_rx_fw_statistics_pram->underpkts); + rx_firmware_statistics->pkts256 = + in_be32(&p_rx_fw_statistics_pram->pkts256); + rx_firmware_statistics->pkts512 = + in_be32(&p_rx_fw_statistics_pram->pkts512); + rx_firmware_statistics->pkts1024 = + in_be32(&p_rx_fw_statistics_pram->pkts1024); + rx_firmware_statistics->pktsjumbo = + in_be32(&p_rx_fw_statistics_pram->pktsjumbo); + rx_firmware_statistics->frlossinmacer = + in_be32(&p_rx_fw_statistics_pram->frlossinmacer); + rx_firmware_statistics->pausefr = + in_be32(&p_rx_fw_statistics_pram->pausefr); + for (i = 0; i < 0x4; i++) + rx_firmware_statistics->res1[i] = + p_rx_fw_statistics_pram->res1[i]; + rx_firmware_statistics->removevlan = + in_be32(&p_rx_fw_statistics_pram->removevlan); + rx_firmware_statistics->replacevlan = + in_be32(&p_rx_fw_statistics_pram->replacevlan); + rx_firmware_statistics->insertvlan = + in_be32(&p_rx_fw_statistics_pram->insertvlan); + } + + /* Hardware only if user handed pointer and driver actually + gathers hardware statistics */ + if (hardware_statistics && (in_be32(&uf_regs->upsmr) & UPSMR_HSE)) { + hardware_statistics->tx64 = in_be32(&ug_regs->tx64); + hardware_statistics->tx127 = in_be32(&ug_regs->tx127); + hardware_statistics->tx255 = in_be32(&ug_regs->tx255); + hardware_statistics->rx64 = in_be32(&ug_regs->rx64); + hardware_statistics->rx127 = in_be32(&ug_regs->rx127); + hardware_statistics->rx255 = in_be32(&ug_regs->rx255); + hardware_statistics->txok = in_be32(&ug_regs->txok); + hardware_statistics->txcf = in_be16(&ug_regs->txcf); + hardware_statistics->tmca = in_be32(&ug_regs->tmca); + hardware_statistics->tbca = in_be32(&ug_regs->tbca); + hardware_statistics->rxfok = in_be32(&ug_regs->rxfok); + hardware_statistics->rxbok = in_be32(&ug_regs->rxbok); + hardware_statistics->rbyt = in_be32(&ug_regs->rbyt); + hardware_statistics->rmca = in_be32(&ug_regs->rmca); + hardware_statistics->rbca = in_be32(&ug_regs->rbca); + } +} + +static void dump_bds(ucc_geth_private_t *ugeth) +{ + int i; + int length; + + for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) { + if (ugeth->p_tx_bd_ring[i]) { + length = + (ugeth->ug_info->bdRingLenTx[i] * + UCC_GETH_SIZE_OF_BD); + ugeth_info("TX BDs[%d]", i); + mem_disp(ugeth->p_tx_bd_ring[i], length); + } + } + for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) { + if (ugeth->p_rx_bd_ring[i]) { + length = + (ugeth->ug_info->bdRingLenRx[i] * + UCC_GETH_SIZE_OF_BD); + ugeth_info("RX BDs[%d]", i); + mem_disp(ugeth->p_rx_bd_ring[i], length); + } + } +} + +static void dump_regs(ucc_geth_private_t *ugeth) +{ + int i; + + ugeth_info("UCC%d Geth registers:", ugeth->ug_info->uf_info.ucc_num); + ugeth_info("Base address: 0x%08x", (u32) ugeth->ug_regs); + + ugeth_info("maccfg1 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->maccfg1, + in_be32(&ugeth->ug_regs->maccfg1)); + ugeth_info("maccfg2 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->maccfg2, + in_be32(&ugeth->ug_regs->maccfg2)); + ugeth_info("ipgifg : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->ipgifg, + in_be32(&ugeth->ug_regs->ipgifg)); + ugeth_info("hafdup : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->hafdup, + in_be32(&ugeth->ug_regs->hafdup)); + ugeth_info("miimcfg : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimcfg, + in_be32(&ugeth->ug_regs->miimng.miimcfg)); + ugeth_info("miimcom : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimcom, + in_be32(&ugeth->ug_regs->miimng.miimcom)); + ugeth_info("miimadd : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimadd, + in_be32(&ugeth->ug_regs->miimng.miimadd)); + ugeth_info("miimcon : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimcon, + in_be32(&ugeth->ug_regs->miimng.miimcon)); + ugeth_info("miimstat : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimstat, + in_be32(&ugeth->ug_regs->miimng.miimstat)); + ugeth_info("miimmind : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimind, + in_be32(&ugeth->ug_regs->miimng.miimind)); + ugeth_info("ifctl : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->ifctl, + in_be32(&ugeth->ug_regs->ifctl)); + ugeth_info("ifstat : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->ifstat, + in_be32(&ugeth->ug_regs->ifstat)); + ugeth_info("macstnaddr1: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->macstnaddr1, + in_be32(&ugeth->ug_regs->macstnaddr1)); + ugeth_info("macstnaddr2: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->macstnaddr2, + in_be32(&ugeth->ug_regs->macstnaddr2)); + ugeth_info("uempr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->uempr, + in_be32(&ugeth->ug_regs->uempr)); + ugeth_info("utbipar : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->utbipar, + in_be32(&ugeth->ug_regs->utbipar)); + ugeth_info("uescr : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->ug_regs->uescr, + in_be16(&ugeth->ug_regs->uescr)); + ugeth_info("tx64 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tx64, + in_be32(&ugeth->ug_regs->tx64)); + ugeth_info("tx127 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tx127, + in_be32(&ugeth->ug_regs->tx127)); + ugeth_info("tx255 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tx255, + in_be32(&ugeth->ug_regs->tx255)); + ugeth_info("rx64 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rx64, + in_be32(&ugeth->ug_regs->rx64)); + ugeth_info("rx127 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rx127, + in_be32(&ugeth->ug_regs->rx127)); + ugeth_info("rx255 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rx255, + in_be32(&ugeth->ug_regs->rx255)); + ugeth_info("txok : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->txok, + in_be32(&ugeth->ug_regs->txok)); + ugeth_info("txcf : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->ug_regs->txcf, + in_be16(&ugeth->ug_regs->txcf)); + ugeth_info("tmca : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tmca, + in_be32(&ugeth->ug_regs->tmca)); + ugeth_info("tbca : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tbca, + in_be32(&ugeth->ug_regs->tbca)); + ugeth_info("rxfok : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rxfok, + in_be32(&ugeth->ug_regs->rxfok)); + ugeth_info("rxbok : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rxbok, + in_be32(&ugeth->ug_regs->rxbok)); + ugeth_info("rbyt : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rbyt, + in_be32(&ugeth->ug_regs->rbyt)); + ugeth_info("rmca : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rmca, + in_be32(&ugeth->ug_regs->rmca)); + ugeth_info("rbca : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rbca, + in_be32(&ugeth->ug_regs->rbca)); + ugeth_info("scar : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->scar, + in_be32(&ugeth->ug_regs->scar)); + ugeth_info("scam : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->scam, + in_be32(&ugeth->ug_regs->scam)); + + if (ugeth->p_thread_data_tx) { + int numThreadsTxNumerical; + switch (ugeth->ug_info->numThreadsTx) { + case UCC_GETH_NUM_OF_THREADS_1: + numThreadsTxNumerical = 1; + break; + case UCC_GETH_NUM_OF_THREADS_2: + numThreadsTxNumerical = 2; + break; + case UCC_GETH_NUM_OF_THREADS_4: + numThreadsTxNumerical = 4; + break; + case UCC_GETH_NUM_OF_THREADS_6: + numThreadsTxNumerical = 6; + break; + case UCC_GETH_NUM_OF_THREADS_8: + numThreadsTxNumerical = 8; + break; + default: + numThreadsTxNumerical = 0; + break; + } + + ugeth_info("Thread data TXs:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_thread_data_tx); + for (i = 0; i < numThreadsTxNumerical; i++) { + ugeth_info("Thread data TX[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_thread_data_tx[i]); + mem_disp((u8 *) & ugeth->p_thread_data_tx[i], + sizeof(ucc_geth_thread_data_tx_t)); + } + } + if (ugeth->p_thread_data_rx) { + int numThreadsRxNumerical; + switch (ugeth->ug_info->numThreadsRx) { + case UCC_GETH_NUM_OF_THREADS_1: + numThreadsRxNumerical = 1; + break; + case UCC_GETH_NUM_OF_THREADS_2: + numThreadsRxNumerical = 2; + break; + case UCC_GETH_NUM_OF_THREADS_4: + numThreadsRxNumerical = 4; + break; + case UCC_GETH_NUM_OF_THREADS_6: + numThreadsRxNumerical = 6; + break; + case UCC_GETH_NUM_OF_THREADS_8: + numThreadsRxNumerical = 8; + break; + default: + numThreadsRxNumerical = 0; + break; + } + + ugeth_info("Thread data RX:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_thread_data_rx); + for (i = 0; i < numThreadsRxNumerical; i++) { + ugeth_info("Thread data RX[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_thread_data_rx[i]); + mem_disp((u8 *) & ugeth->p_thread_data_rx[i], + sizeof(ucc_geth_thread_data_rx_t)); + } + } + if (ugeth->p_exf_glbl_param) { + ugeth_info("EXF global param:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_exf_glbl_param); + mem_disp((u8 *) ugeth->p_exf_glbl_param, + sizeof(*ugeth->p_exf_glbl_param)); + } + if (ugeth->p_tx_glbl_pram) { + ugeth_info("TX global param:"); + ugeth_info("Base address: 0x%08x", (u32) ugeth->p_tx_glbl_pram); + ugeth_info("temoder : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_tx_glbl_pram->temoder, + in_be16(&ugeth->p_tx_glbl_pram->temoder)); + ugeth_info("sqptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->sqptr, + in_be32(&ugeth->p_tx_glbl_pram->sqptr)); + ugeth_info("schedulerbasepointer: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->schedulerbasepointer, + in_be32(&ugeth->p_tx_glbl_pram-> + schedulerbasepointer)); + ugeth_info("txrmonbaseptr: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->txrmonbaseptr, + in_be32(&ugeth->p_tx_glbl_pram->txrmonbaseptr)); + ugeth_info("tstate : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->tstate, + in_be32(&ugeth->p_tx_glbl_pram->tstate)); + ugeth_info("iphoffset[0] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[0], + ugeth->p_tx_glbl_pram->iphoffset[0]); + ugeth_info("iphoffset[1] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[1], + ugeth->p_tx_glbl_pram->iphoffset[1]); + ugeth_info("iphoffset[2] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[2], + ugeth->p_tx_glbl_pram->iphoffset[2]); + ugeth_info("iphoffset[3] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[3], + ugeth->p_tx_glbl_pram->iphoffset[3]); + ugeth_info("iphoffset[4] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[4], + ugeth->p_tx_glbl_pram->iphoffset[4]); + ugeth_info("iphoffset[5] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[5], + ugeth->p_tx_glbl_pram->iphoffset[5]); + ugeth_info("iphoffset[6] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[6], + ugeth->p_tx_glbl_pram->iphoffset[6]); + ugeth_info("iphoffset[7] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[7], + ugeth->p_tx_glbl_pram->iphoffset[7]); + ugeth_info("vtagtable[0] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[0], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[0])); + ugeth_info("vtagtable[1] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[1], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[1])); + ugeth_info("vtagtable[2] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[2], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[2])); + ugeth_info("vtagtable[3] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[3], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[3])); + ugeth_info("vtagtable[4] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[4], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[4])); + ugeth_info("vtagtable[5] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[5], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[5])); + ugeth_info("vtagtable[6] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[6], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[6])); + ugeth_info("vtagtable[7] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[7], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[7])); + ugeth_info("tqptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->tqptr, + in_be32(&ugeth->p_tx_glbl_pram->tqptr)); + } + if (ugeth->p_rx_glbl_pram) { + ugeth_info("RX global param:"); + ugeth_info("Base address: 0x%08x", (u32) ugeth->p_rx_glbl_pram); + ugeth_info("remoder : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->remoder, + in_be32(&ugeth->p_rx_glbl_pram->remoder)); + ugeth_info("rqptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->rqptr, + in_be32(&ugeth->p_rx_glbl_pram->rqptr)); + ugeth_info("typeorlen : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->typeorlen, + in_be16(&ugeth->p_rx_glbl_pram->typeorlen)); + ugeth_info("rxgstpack : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_rx_glbl_pram->rxgstpack, + ugeth->p_rx_glbl_pram->rxgstpack); + ugeth_info("rxrmonbaseptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->rxrmonbaseptr, + in_be32(&ugeth->p_rx_glbl_pram->rxrmonbaseptr)); + ugeth_info("intcoalescingptr: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->intcoalescingptr, + in_be32(&ugeth->p_rx_glbl_pram->intcoalescingptr)); + ugeth_info("rstate : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_rx_glbl_pram->rstate, + ugeth->p_rx_glbl_pram->rstate); + ugeth_info("mrblr : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->mrblr, + in_be16(&ugeth->p_rx_glbl_pram->mrblr)); + ugeth_info("rbdqptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->rbdqptr, + in_be32(&ugeth->p_rx_glbl_pram->rbdqptr)); + ugeth_info("mflr : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->mflr, + in_be16(&ugeth->p_rx_glbl_pram->mflr)); + ugeth_info("minflr : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->minflr, + in_be16(&ugeth->p_rx_glbl_pram->minflr)); + ugeth_info("maxd1 : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->maxd1, + in_be16(&ugeth->p_rx_glbl_pram->maxd1)); + ugeth_info("maxd2 : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->maxd2, + in_be16(&ugeth->p_rx_glbl_pram->maxd2)); + ugeth_info("ecamptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->ecamptr, + in_be32(&ugeth->p_rx_glbl_pram->ecamptr)); + ugeth_info("l2qt : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l2qt, + in_be32(&ugeth->p_rx_glbl_pram->l2qt)); + ugeth_info("l3qt[0] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[0], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[0])); + ugeth_info("l3qt[1] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[1], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[1])); + ugeth_info("l3qt[2] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[2], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[2])); + ugeth_info("l3qt[3] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[3], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[3])); + ugeth_info("l3qt[4] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[4], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[4])); + ugeth_info("l3qt[5] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[5], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[5])); + ugeth_info("l3qt[6] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[6], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[6])); + ugeth_info("l3qt[7] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[7], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[7])); + ugeth_info("vlantype : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->vlantype, + in_be16(&ugeth->p_rx_glbl_pram->vlantype)); + ugeth_info("vlantci : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->vlantci, + in_be16(&ugeth->p_rx_glbl_pram->vlantci)); + for (i = 0; i < 64; i++) + ugeth_info + ("addressfiltering[%d]: addr - 0x%08x, val - 0x%02x", + i, + (u32) & ugeth->p_rx_glbl_pram->addressfiltering[i], + ugeth->p_rx_glbl_pram->addressfiltering[i]); + ugeth_info("exfGlobalParam : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->exfGlobalParam, + in_be32(&ugeth->p_rx_glbl_pram->exfGlobalParam)); + } + if (ugeth->p_send_q_mem_reg) { + ugeth_info("Send Q memory registers:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_send_q_mem_reg); + for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) { + ugeth_info("SQQD[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_send_q_mem_reg->sqqd[i]); + mem_disp((u8 *) & ugeth->p_send_q_mem_reg->sqqd[i], + sizeof(ucc_geth_send_queue_qd_t)); + } + } + if (ugeth->p_scheduler) { + ugeth_info("Scheduler:"); + ugeth_info("Base address: 0x%08x", (u32) ugeth->p_scheduler); + mem_disp((u8 *) ugeth->p_scheduler, + sizeof(*ugeth->p_scheduler)); + } + if (ugeth->p_tx_fw_statistics_pram) { + ugeth_info("TX FW statistics pram:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_tx_fw_statistics_pram); + mem_disp((u8 *) ugeth->p_tx_fw_statistics_pram, + sizeof(*ugeth->p_tx_fw_statistics_pram)); + } + if (ugeth->p_rx_fw_statistics_pram) { + ugeth_info("RX FW statistics pram:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_rx_fw_statistics_pram); + mem_disp((u8 *) ugeth->p_rx_fw_statistics_pram, + sizeof(*ugeth->p_rx_fw_statistics_pram)); + } + if (ugeth->p_rx_irq_coalescing_tbl) { + ugeth_info("RX IRQ coalescing tables:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_rx_irq_coalescing_tbl); + for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) { + ugeth_info("RX IRQ coalescing table entry[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i]); + ugeth_info + ("interruptcoalescingmaxvalue: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i].interruptcoalescingmaxvalue, + in_be32(&ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i]. + interruptcoalescingmaxvalue)); + ugeth_info + ("interruptcoalescingcounter : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i].interruptcoalescingcounter, + in_be32(&ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i]. + interruptcoalescingcounter)); + } + } + if (ugeth->p_rx_bd_qs_tbl) { + ugeth_info("RX BD QS tables:"); + ugeth_info("Base address: 0x%08x", (u32) ugeth->p_rx_bd_qs_tbl); + for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) { + ugeth_info("RX BD QS table[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i]); + ugeth_info + ("bdbaseptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i].bdbaseptr, + in_be32(&ugeth->p_rx_bd_qs_tbl[i].bdbaseptr)); + ugeth_info + ("bdptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i].bdptr, + in_be32(&ugeth->p_rx_bd_qs_tbl[i].bdptr)); + ugeth_info + ("externalbdbaseptr: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr, + in_be32(&ugeth->p_rx_bd_qs_tbl[i]. + externalbdbaseptr)); + ugeth_info + ("externalbdptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i].externalbdptr, + in_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdptr)); + ugeth_info("ucode RX Prefetched BDs:"); + ugeth_info("Base address: 0x%08x", + (u32) + qe_muram_addr(in_be32 + (&ugeth->p_rx_bd_qs_tbl[i]. + bdbaseptr))); + mem_disp((u8 *) + qe_muram_addr(in_be32 + (&ugeth->p_rx_bd_qs_tbl[i]. + bdbaseptr)), + sizeof(ucc_geth_rx_prefetched_bds_t)); + } + } + if (ugeth->p_init_enet_param_shadow) { + int size; + ugeth_info("Init enet param shadow:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_init_enet_param_shadow); + mem_disp((u8 *) ugeth->p_init_enet_param_shadow, + sizeof(*ugeth->p_init_enet_param_shadow)); + + size = sizeof(ucc_geth_thread_rx_pram_t); + if (ugeth->ug_info->rxExtendedFiltering) { + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING; + if (ugeth->ug_info->largestexternallookupkeysize == + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES) + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_8; + if (ugeth->ug_info->largestexternallookupkeysize == + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES) + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_16; + } + + dump_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + txthread[0]), + ENET_INIT_PARAM_MAX_ENTRIES_TX, + sizeof(ucc_geth_thread_tx_pram_t), + ugeth->ug_info->riscTx, 0); + dump_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + rxthread[0]), + ENET_INIT_PARAM_MAX_ENTRIES_RX, size, + ugeth->ug_info->riscRx, 1); + } +} +#endif /* DEBUG */ + +static void init_default_reg_vals(volatile u32 *upsmr_register, + volatile u32 *maccfg1_register, + volatile u32 *maccfg2_register) +{ + out_be32(upsmr_register, UCC_GETH_UPSMR_INIT); + out_be32(maccfg1_register, UCC_GETH_MACCFG1_INIT); + out_be32(maccfg2_register, UCC_GETH_MACCFG2_INIT); +} + +static int init_half_duplex_params(int alt_beb, + int back_pressure_no_backoff, + int no_backoff, + int excess_defer, + u8 alt_beb_truncation, + u8 max_retransmissions, + u8 collision_window, + volatile u32 *hafdup_register) +{ + u32 value = 0; + + if ((alt_beb_truncation > HALFDUP_ALT_BEB_TRUNCATION_MAX) || + (max_retransmissions > HALFDUP_MAX_RETRANSMISSION_MAX) || + (collision_window > HALFDUP_COLLISION_WINDOW_MAX)) + return -EINVAL; + + value = (u32) (alt_beb_truncation << HALFDUP_ALT_BEB_TRUNCATION_SHIFT); + + if (alt_beb) + value |= HALFDUP_ALT_BEB; + if (back_pressure_no_backoff) + value |= HALFDUP_BACK_PRESSURE_NO_BACKOFF; + if (no_backoff) + value |= HALFDUP_NO_BACKOFF; + if (excess_defer) + value |= HALFDUP_EXCESSIVE_DEFER; + + value |= (max_retransmissions << HALFDUP_MAX_RETRANSMISSION_SHIFT); + + value |= collision_window; + + out_be32(hafdup_register, value); + return 0; +} + +static int init_inter_frame_gap_params(u8 non_btb_cs_ipg, + u8 non_btb_ipg, + u8 min_ifg, + u8 btb_ipg, + volatile u32 *ipgifg_register) +{ + u32 value = 0; + + /* Non-Back-to-back IPG part 1 should be <= Non-Back-to-back + IPG part 2 */ + if (non_btb_cs_ipg > non_btb_ipg) + return -EINVAL; + + if ((non_btb_cs_ipg > IPGIFG_NON_BACK_TO_BACK_IFG_PART1_MAX) || + (non_btb_ipg > IPGIFG_NON_BACK_TO_BACK_IFG_PART2_MAX) || + /*(min_ifg > IPGIFG_MINIMUM_IFG_ENFORCEMENT_MAX) || */ + (btb_ipg > IPGIFG_BACK_TO_BACK_IFG_MAX)) + return -EINVAL; + + value |= + ((non_btb_cs_ipg << IPGIFG_NON_BACK_TO_BACK_IFG_PART1_SHIFT) & + IPGIFG_NBTB_CS_IPG_MASK); + value |= + ((non_btb_ipg << IPGIFG_NON_BACK_TO_BACK_IFG_PART2_SHIFT) & + IPGIFG_NBTB_IPG_MASK); + value |= + ((min_ifg << IPGIFG_MINIMUM_IFG_ENFORCEMENT_SHIFT) & + IPGIFG_MIN_IFG_MASK); + value |= (btb_ipg & IPGIFG_BTB_IPG_MASK); + + out_be32(ipgifg_register, value); + return 0; +} + +static int init_flow_control_params(u32 automatic_flow_control_mode, + int rx_flow_control_enable, + int tx_flow_control_enable, + u16 pause_period, + u16 extension_field, + volatile u32 *upsmr_register, + volatile u32 *uempr_register, + volatile u32 *maccfg1_register) +{ + u32 value = 0; + + /* Set UEMPR register */ + value = (u32) pause_period << UEMPR_PAUSE_TIME_VALUE_SHIFT; + value |= (u32) extension_field << UEMPR_EXTENDED_PAUSE_TIME_VALUE_SHIFT; + out_be32(uempr_register, value); + + /* Set UPSMR register */ + value = in_be32(upsmr_register); + value |= automatic_flow_control_mode; + out_be32(upsmr_register, value); + + value = in_be32(maccfg1_register); + if (rx_flow_control_enable) + value |= MACCFG1_FLOW_RX; + if (tx_flow_control_enable) + value |= MACCFG1_FLOW_TX; + out_be32(maccfg1_register, value); + + return 0; +} + +static int init_hw_statistics_gathering_mode(int enable_hardware_statistics, + int auto_zero_hardware_statistics, + volatile u32 *upsmr_register, + volatile u16 *uescr_register) +{ + u32 upsmr_value = 0; + u16 uescr_value = 0; + /* Enable hardware statistics gathering if requested */ + if (enable_hardware_statistics) { + upsmr_value = in_be32(upsmr_register); + upsmr_value |= UPSMR_HSE; + out_be32(upsmr_register, upsmr_value); + } + + /* Clear hardware statistics counters */ + uescr_value = in_be16(uescr_register); + uescr_value |= UESCR_CLRCNT; + /* Automatically zero hardware statistics counters on read, + if requested */ + if (auto_zero_hardware_statistics) + uescr_value |= UESCR_AUTOZ; + out_be16(uescr_register, uescr_value); + + return 0; +} + +static int init_firmware_statistics_gathering_mode(int + enable_tx_firmware_statistics, + int enable_rx_firmware_statistics, + volatile u32 *tx_rmon_base_ptr, + u32 tx_firmware_statistics_structure_address, + volatile u32 *rx_rmon_base_ptr, + u32 rx_firmware_statistics_structure_address, + volatile u16 *temoder_register, + volatile u32 *remoder_register) +{ + /* Note: this function does not check if */ + /* the parameters it receives are NULL */ + u16 temoder_value; + u32 remoder_value; + + if (enable_tx_firmware_statistics) { + out_be32(tx_rmon_base_ptr, + tx_firmware_statistics_structure_address); + temoder_value = in_be16(temoder_register); + temoder_value |= TEMODER_TX_RMON_STATISTICS_ENABLE; + out_be16(temoder_register, temoder_value); + } + + if (enable_rx_firmware_statistics) { + out_be32(rx_rmon_base_ptr, + rx_firmware_statistics_structure_address); + remoder_value = in_be32(remoder_register); + remoder_value |= REMODER_RX_RMON_STATISTICS_ENABLE; + out_be32(remoder_register, remoder_value); + } + + return 0; +} + +static int init_mac_station_addr_regs(u8 address_byte_0, + u8 address_byte_1, + u8 address_byte_2, + u8 address_byte_3, + u8 address_byte_4, + u8 address_byte_5, + volatile u32 *macstnaddr1_register, + volatile u32 *macstnaddr2_register) +{ + u32 value = 0; + + /* Example: for a station address of 0x12345678ABCD, */ + /* 0x12 is byte 0, 0x34 is byte 1 and so on and 0xCD is byte 5 */ + + /* MACSTNADDR1 Register: */ + + /* 0 7 8 15 */ + /* station address byte 5 station address byte 4 */ + /* 16 23 24 31 */ + /* station address byte 3 station address byte 2 */ + value |= (u32) ((address_byte_2 << 0) & 0x000000FF); + value |= (u32) ((address_byte_3 << 8) & 0x0000FF00); + value |= (u32) ((address_byte_4 << 16) & 0x00FF0000); + value |= (u32) ((address_byte_5 << 24) & 0xFF000000); + + out_be32(macstnaddr1_register, value); + + /* MACSTNADDR2 Register: */ + + /* 0 7 8 15 */ + /* station address byte 1 station address byte 0 */ + /* 16 23 24 31 */ + /* reserved reserved */ + value = 0; + value |= (u32) ((address_byte_0 << 16) & 0x00FF0000); + value |= (u32) ((address_byte_1 << 24) & 0xFF000000); + + out_be32(macstnaddr2_register, value); + + return 0; +} + +static int init_mac_duplex_mode(int full_duplex, + int limited_to_full_duplex, + volatile u32 *maccfg2_register) +{ + u32 value = 0; + + /* some interfaces must work in full duplex mode */ + if ((full_duplex == 0) && (limited_to_full_duplex == 1)) + return -EINVAL; + + value = in_be32(maccfg2_register); + + if (full_duplex) + value |= MACCFG2_FDX; + else + value &= ~MACCFG2_FDX; + + out_be32(maccfg2_register, value); + return 0; +} + +static int init_check_frame_length_mode(int length_check, + volatile u32 *maccfg2_register) +{ + u32 value = 0; + + value = in_be32(maccfg2_register); + + if (length_check) + value |= MACCFG2_LC; + else + value &= ~MACCFG2_LC; + + out_be32(maccfg2_register, value); + return 0; +} + +static int init_preamble_length(u8 preamble_length, + volatile u32 *maccfg2_register) +{ + u32 value = 0; + + if ((preamble_length < 3) || (preamble_length > 7)) + return -EINVAL; + + value = in_be32(maccfg2_register); + value &= ~MACCFG2_PREL_MASK; + value |= (preamble_length << MACCFG2_PREL_SHIFT); + out_be32(maccfg2_register, value); + return 0; +} + +static int init_mii_management_configuration(int reset_mgmt, + int preamble_supress, + volatile u32 *miimcfg_register, + volatile u32 *miimind_register) +{ + unsigned int timeout = PHY_INIT_TIMEOUT; + u32 value = 0; + + value = in_be32(miimcfg_register); + if (reset_mgmt) { + value |= MIIMCFG_RESET_MANAGEMENT; + out_be32(miimcfg_register, value); + } + + value = 0; + + if (preamble_supress) + value |= MIIMCFG_NO_PREAMBLE; + + value |= UCC_GETH_MIIMCFG_MNGMNT_CLC_DIV_INIT; + out_be32(miimcfg_register, value); + + /* Wait until the bus is free */ + while ((in_be32(miimind_register) & MIIMIND_BUSY) && timeout--) + cpu_relax(); + + if (timeout <= 0) { + ugeth_err("%s: The MII Bus is stuck!", __FUNCTION__); + return -ETIMEDOUT; + } + + return 0; +} + +static int init_rx_parameters(int reject_broadcast, + int receive_short_frames, + int promiscuous, volatile u32 *upsmr_register) +{ + u32 value = 0; + + value = in_be32(upsmr_register); + + if (reject_broadcast) + value |= UPSMR_BRO; + else + value &= ~UPSMR_BRO; + + if (receive_short_frames) + value |= UPSMR_RSH; + else + value &= ~UPSMR_RSH; + + if (promiscuous) + value |= UPSMR_PRO; + else + value &= ~UPSMR_PRO; + + out_be32(upsmr_register, value); + + return 0; +} + +static int init_max_rx_buff_len(u16 max_rx_buf_len, + volatile u16 *mrblr_register) +{ + /* max_rx_buf_len value must be a multiple of 128 */ + if ((max_rx_buf_len == 0) + || (max_rx_buf_len % UCC_GETH_MRBLR_ALIGNMENT)) + return -EINVAL; + + out_be16(mrblr_register, max_rx_buf_len); + return 0; +} + +static int init_min_frame_len(u16 min_frame_length, + volatile u16 *minflr_register, + volatile u16 *mrblr_register) +{ + u16 mrblr_value = 0; + + mrblr_value = in_be16(mrblr_register); + if (min_frame_length >= (mrblr_value - 4)) + return -EINVAL; + + out_be16(minflr_register, min_frame_length); + return 0; +} + +static int adjust_enet_interface(ucc_geth_private_t *ugeth) +{ + ucc_geth_info_t *ug_info; + ucc_geth_t *ug_regs; + ucc_fast_t *uf_regs; + enet_speed_e speed; + int ret_val, rpm = 0, tbi = 0, r10m = 0, rmm = + 0, limited_to_full_duplex = 0; + u32 upsmr, maccfg2, utbipar, tbiBaseAddress; + u16 value; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ug_info = ugeth->ug_info; + ug_regs = ugeth->ug_regs; + uf_regs = ugeth->uccf->uf_regs; + + /* Analyze enet_interface according to Interface Mode Configuration + table */ + ret_val = + get_interface_details(ug_info->enet_interface, &speed, &r10m, &rmm, + &rpm, &tbi, &limited_to_full_duplex); + if (ret_val != 0) { + ugeth_err + ("%s: half duplex not supported in requested configuration.", + __FUNCTION__); + return ret_val; + } + + /* Set MACCFG2 */ + maccfg2 = in_be32(&ug_regs->maccfg2); + maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; + if ((speed == ENET_SPEED_10BT) || (speed == ENET_SPEED_100BT)) + maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; + else if (speed == ENET_SPEED_1000BT) + maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; + maccfg2 |= ug_info->padAndCrc; + out_be32(&ug_regs->maccfg2, maccfg2); + + /* Set UPSMR */ + upsmr = in_be32(&uf_regs->upsmr); + upsmr &= ~(UPSMR_RPM | UPSMR_R10M | UPSMR_TBIM | UPSMR_RMM); + if (rpm) + upsmr |= UPSMR_RPM; + if (r10m) + upsmr |= UPSMR_R10M; + if (tbi) + upsmr |= UPSMR_TBIM; + if (rmm) + upsmr |= UPSMR_RMM; + out_be32(&uf_regs->upsmr, upsmr); + + /* Set UTBIPAR */ + utbipar = in_be32(&ug_regs->utbipar); + utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; + if (tbi) + utbipar |= + (ug_info->phy_address + + ugeth->ug_info->uf_info. + ucc_num) << UTBIPAR_PHY_ADDRESS_SHIFT; + else + utbipar |= + (0x10 + + ugeth->ug_info->uf_info. + ucc_num) << UTBIPAR_PHY_ADDRESS_SHIFT; + out_be32(&ug_regs->utbipar, utbipar); + + /* Disable autonegotiation in tbi mode, because by default it + comes up in autonegotiation mode. */ + /* Note that this depends on proper setting in utbipar register. */ + if (tbi) { + tbiBaseAddress = in_be32(&ug_regs->utbipar); + tbiBaseAddress &= UTBIPAR_PHY_ADDRESS_MASK; + tbiBaseAddress >>= UTBIPAR_PHY_ADDRESS_SHIFT; + value = + ugeth->mii_info->mdio_read(ugeth->dev, (u8) tbiBaseAddress, + ENET_TBI_MII_CR); + value &= ~0x1000; /* Turn off autonegotiation */ + ugeth->mii_info->mdio_write(ugeth->dev, (u8) tbiBaseAddress, + ENET_TBI_MII_CR, value); + } + + ret_val = init_mac_duplex_mode(1, + limited_to_full_duplex, + &ug_regs->maccfg2); + if (ret_val != 0) { + ugeth_err + ("%s: half duplex not supported in requested configuration.", + __FUNCTION__); + return ret_val; + } + + init_check_frame_length_mode(ug_info->lengthCheckRx, &ug_regs->maccfg2); + + ret_val = init_preamble_length(ug_info->prel, &ug_regs->maccfg2); + if (ret_val != 0) { + ugeth_err + ("%s: Preamble length must be between 3 and 7 inclusive.", + __FUNCTION__); + return ret_val; + } + + return 0; +} + +/* Called every time the controller might need to be made + * aware of new link state. The PHY code conveys this + * information through variables in the ugeth structure, and this + * function converts those variables into the appropriate + * register values, and can bring down the device if needed. + */ +static void adjust_link(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_geth_t *ug_regs; + u32 tempval; + struct ugeth_mii_info *mii_info = ugeth->mii_info; + + ug_regs = ugeth->ug_regs; + + if (mii_info->link) { + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (mii_info->duplex != ugeth->oldduplex) { + if (!(mii_info->duplex)) { + tempval = in_be32(&ug_regs->maccfg2); + tempval &= ~(MACCFG2_FDX); + out_be32(&ug_regs->maccfg2, tempval); + + ugeth_info("%s: Half Duplex", dev->name); + } else { + tempval = in_be32(&ug_regs->maccfg2); + tempval |= MACCFG2_FDX; + out_be32(&ug_regs->maccfg2, tempval); + + ugeth_info("%s: Full Duplex", dev->name); + } + + ugeth->oldduplex = mii_info->duplex; + } + + if (mii_info->speed != ugeth->oldspeed) { + switch (mii_info->speed) { + case 1000: +#ifdef CONFIG_MPC836x +/* FIXME: This code is for 100Mbs BUG fixing, +remove this when it is fixed!!! */ + if (ugeth->ug_info->enet_interface == + ENET_1000_GMII) + /* Run the commands which initialize the PHY */ + { + tempval = + (u32) mii_info->mdio_read(ugeth-> + dev, mii_info->mii_id, 0x1b); + tempval |= 0x000f; + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, 0x1b, + (u16) tempval); + tempval = + (u32) mii_info->mdio_read(ugeth-> + dev, mii_info->mii_id, + MII_BMCR); + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, MII_BMCR, + (u16) (tempval | BMCR_RESET)); + } else if (ugeth->ug_info->enet_interface == + ENET_1000_RGMII) + /* Run the commands which initialize the PHY */ + { + tempval = + (u32) mii_info->mdio_read(ugeth-> + dev, mii_info->mii_id, 0x1b); + tempval = (tempval & ~0x000f) | 0x000b; + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, 0x1b, + (u16) tempval); + tempval = + (u32) mii_info->mdio_read(ugeth-> + dev, mii_info->mii_id, + MII_BMCR); + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, MII_BMCR, + (u16) (tempval | BMCR_RESET)); + } + msleep(4000); +#endif /* CONFIG_MPC8360 */ + adjust_enet_interface(ugeth); + break; + case 100: + case 10: +#ifdef CONFIG_MPC836x +/* FIXME: This code is for 100Mbs BUG fixing, +remove this lines when it will be fixed!!! */ + ugeth->ug_info->enet_interface = ENET_100_RGMII; + tempval = + (u32) mii_info->mdio_read(ugeth->dev, + mii_info->mii_id, + 0x1b); + tempval = (tempval & ~0x000f) | 0x000b; + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, 0x1b, + (u16) tempval); + tempval = + (u32) mii_info->mdio_read(ugeth->dev, + mii_info->mii_id, + MII_BMCR); + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, MII_BMCR, + (u16) (tempval | + BMCR_RESET)); + msleep(4000); +#endif /* CONFIG_MPC8360 */ + adjust_enet_interface(ugeth); + break; + default: + ugeth_warn + ("%s: Ack! Speed (%d) is not 10/100/1000!", + dev->name, mii_info->speed); + break; + } + + ugeth_info("%s: Speed %dBT", dev->name, + mii_info->speed); + + ugeth->oldspeed = mii_info->speed; + } + + if (!ugeth->oldlink) { + ugeth_info("%s: Link is up", dev->name); + ugeth->oldlink = 1; + netif_carrier_on(dev); + netif_schedule(dev); + } + } else { + if (ugeth->oldlink) { + ugeth_info("%s: Link is down", dev->name); + ugeth->oldlink = 0; + ugeth->oldspeed = 0; + ugeth->oldduplex = -1; + netif_carrier_off(dev); + } + } +} + +/* Configure the PHY for dev. + * returns 0 if success. -1 if failure + */ +static int init_phy(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + struct phy_info *curphy; + ucc_mii_mng_t *mii_regs; + struct ugeth_mii_info *mii_info; + int err; + + mii_regs = &ugeth->ug_regs->miimng; + + ugeth->oldlink = 0; + ugeth->oldspeed = 0; + ugeth->oldduplex = -1; + + mii_info = kmalloc(sizeof(struct ugeth_mii_info), GFP_KERNEL); + + if (NULL == mii_info) { + ugeth_err("%s: Could not allocate mii_info", dev->name); + return -ENOMEM; + } + + mii_info->mii_regs = mii_regs; + mii_info->speed = SPEED_1000; + mii_info->duplex = DUPLEX_FULL; + mii_info->pause = 0; + mii_info->link = 0; + + mii_info->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full); + mii_info->autoneg = 1; + + mii_info->mii_id = ugeth->ug_info->phy_address; + + mii_info->dev = dev; + + mii_info->mdio_read = &read_phy_reg; + mii_info->mdio_write = &write_phy_reg; + + ugeth->mii_info = mii_info; + + spin_lock_irq(&ugeth->lock); + + /* Set this UCC to be the master of the MII managment */ + ucc_set_qe_mux_mii_mng(ugeth->ug_info->uf_info.ucc_num); + + if (init_mii_management_configuration(1, + ugeth->ug_info-> + miiPreambleSupress, + &mii_regs->miimcfg, + &mii_regs->miimind)) { + ugeth_err("%s: The MII Bus is stuck!", dev->name); + err = -1; + goto bus_fail; + } + + spin_unlock_irq(&ugeth->lock); + + /* get info for this PHY */ + curphy = get_phy_info(ugeth->mii_info); + + if (curphy == NULL) { + ugeth_err("%s: No PHY found", dev->name); + err = -1; + goto no_phy; + } + + mii_info->phyinfo = curphy; + + /* Run the commands which initialize the PHY */ + if (curphy->init) { + err = curphy->init(ugeth->mii_info); + if (err) + goto phy_init_fail; + } + + return 0; + + phy_init_fail: + no_phy: + bus_fail: + kfree(mii_info); + + return err; +} + +#ifdef CONFIG_UGETH_TX_ON_DEMOND +static int ugeth_transmit_on_demand(ucc_geth_private_t *ugeth) +{ + ucc_fast_transmit_on_demand(ugeth->uccf); + + return 0; +} +#endif + +static int ugeth_graceful_stop_tx(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + u32 cecr_subblock; + u32 temp; + + uccf = ugeth->uccf; + + /* Mask GRACEFUL STOP TX interrupt bit and clear it */ + temp = in_be32(uccf->p_uccm); + temp &= ~UCCE_GRA; + out_be32(uccf->p_uccm, temp); + out_be32(uccf->p_ucce, UCCE_GRA); /* clear by writing 1 */ + + /* Issue host command */ + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, + (u8) QE_CR_PROTOCOL_ETHERNET, 0); + + /* Wait for command to complete */ + do { + temp = in_be32(uccf->p_ucce); + } while (!(temp & UCCE_GRA)); + + uccf->stopped_tx = 1; + + return 0; +} + +static int ugeth_graceful_stop_rx(ucc_geth_private_t * ugeth) +{ + ucc_fast_private_t *uccf; + u32 cecr_subblock; + u8 temp; + + uccf = ugeth->uccf; + + /* Clear acknowledge bit */ + temp = ugeth->p_rx_glbl_pram->rxgstpack; + temp &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; + ugeth->p_rx_glbl_pram->rxgstpack = temp; + + /* Keep issuing command and checking acknowledge bit until + it is asserted, according to spec */ + do { + /* Issue host command */ + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info. + ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, + (u8) QE_CR_PROTOCOL_ETHERNET, 0); + + temp = ugeth->p_rx_glbl_pram->rxgstpack; + } while (!(temp & GRACEFUL_STOP_ACKNOWLEDGE_RX)); + + uccf->stopped_rx = 1; + + return 0; +} + +static int ugeth_restart_tx(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + u32 cecr_subblock; + + uccf = ugeth->uccf; + + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + qe_issue_cmd(QE_RESTART_TX, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, + 0); + uccf->stopped_tx = 0; + + return 0; +} + +static int ugeth_restart_rx(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + u32 cecr_subblock; + + uccf = ugeth->uccf; + + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + qe_issue_cmd(QE_RESTART_RX, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, + 0); + uccf->stopped_rx = 0; + + return 0; +} + +static int ugeth_enable(ucc_geth_private_t *ugeth, comm_dir_e mode) +{ + ucc_fast_private_t *uccf; + int enabled_tx, enabled_rx; + + uccf = ugeth->uccf; + + /* check if the UCC number is in range. */ + if (ugeth->ug_info->uf_info.ucc_num >= UCC_MAX_NUM) { + ugeth_err("%s: ucc_num out of range.", __FUNCTION__); + return -EINVAL; + } + + enabled_tx = uccf->enabled_tx; + enabled_rx = uccf->enabled_rx; + + /* Get Tx and Rx going again, in case this channel was actively + disabled. */ + if ((mode & COMM_DIR_TX) && (!enabled_tx) && uccf->stopped_tx) + ugeth_restart_tx(ugeth); + if ((mode & COMM_DIR_RX) && (!enabled_rx) && uccf->stopped_rx) + ugeth_restart_rx(ugeth); + + ucc_fast_enable(uccf, mode); /* OK to do even if not disabled */ + + return 0; + +} + +static int ugeth_disable(ucc_geth_private_t * ugeth, comm_dir_e mode) +{ + ucc_fast_private_t *uccf; + + uccf = ugeth->uccf; + + /* check if the UCC number is in range. */ + if (ugeth->ug_info->uf_info.ucc_num >= UCC_MAX_NUM) { + ugeth_err("%s: ucc_num out of range.", __FUNCTION__); + return -EINVAL; + } + + /* Stop any transmissions */ + if ((mode & COMM_DIR_TX) && uccf->enabled_tx && !uccf->stopped_tx) + ugeth_graceful_stop_tx(ugeth); + + /* Stop any receptions */ + if ((mode & COMM_DIR_RX) && uccf->enabled_rx && !uccf->stopped_rx) + ugeth_graceful_stop_rx(ugeth); + + ucc_fast_disable(ugeth->uccf, mode); /* OK to do even if not enabled */ + + return 0; +} + +static void ugeth_dump_regs(ucc_geth_private_t *ugeth) +{ +#ifdef DEBUG + ucc_fast_dump_regs(ugeth->uccf); + dump_regs(ugeth); + dump_bds(ugeth); +#endif +} + +#ifdef CONFIG_UGETH_FILTERING +static int ugeth_ext_filtering_serialize_tad(ucc_geth_tad_params_t * + p_UccGethTadParams, + qe_fltr_tad_t *qe_fltr_tad) +{ + u16 temp; + + /* Zero serialized TAD */ + memset(qe_fltr_tad, 0, QE_FLTR_TAD_SIZE); + + qe_fltr_tad->serialized[0] |= UCC_GETH_TAD_V; /* Must have this */ + if (p_UccGethTadParams->rx_non_dynamic_extended_features_mode || + (p_UccGethTadParams->vtag_op != UCC_GETH_VLAN_OPERATION_TAGGED_NOP) + || (p_UccGethTadParams->vnontag_op != + UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP) + ) + qe_fltr_tad->serialized[0] |= UCC_GETH_TAD_EF; + if (p_UccGethTadParams->reject_frame) + qe_fltr_tad->serialized[0] |= UCC_GETH_TAD_REJ; + temp = + (u16) (((u16) p_UccGethTadParams-> + vtag_op) << UCC_GETH_TAD_VTAG_OP_SHIFT); + qe_fltr_tad->serialized[0] |= (u8) (temp >> 8); /* upper bits */ + + qe_fltr_tad->serialized[1] |= (u8) (temp & 0x00ff); /* lower bits */ + if (p_UccGethTadParams->vnontag_op == + UCC_GETH_VLAN_OPERATION_NON_TAGGED_Q_TAG_INSERT) + qe_fltr_tad->serialized[1] |= UCC_GETH_TAD_V_NON_VTAG_OP; + qe_fltr_tad->serialized[1] |= + p_UccGethTadParams->rqos << UCC_GETH_TAD_RQOS_SHIFT; + + qe_fltr_tad->serialized[2] |= + p_UccGethTadParams->vpri << UCC_GETH_TAD_V_PRIORITY_SHIFT; + /* upper bits */ + qe_fltr_tad->serialized[2] |= (u8) (p_UccGethTadParams->vid >> 8); + /* lower bits */ + qe_fltr_tad->serialized[3] |= (u8) (p_UccGethTadParams->vid & 0x00ff); + + return 0; +} + +static enet_addr_container_t + *ugeth_82xx_filtering_get_match_addr_in_hash(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr) +{ + enet_addr_container_t *enet_addr_cont; + struct list_head *p_lh; + u16 i, num; + int32_t j; + u8 *p_counter; + + if ((*p_enet_addr)[0] & ENET_GROUP_ADDR) { + p_lh = &ugeth->group_hash_q; + p_counter = &(ugeth->numGroupAddrInHash); + } else { + p_lh = &ugeth->ind_hash_q; + p_counter = &(ugeth->numIndAddrInHash); + } + + if (!p_lh) + return NULL; + + num = *p_counter; + + for (i = 0; i < num; i++) { + enet_addr_cont = + (enet_addr_container_t *) + ENET_ADDR_CONT_ENTRY(dequeue(p_lh)); + for (j = ENET_NUM_OCTETS_PER_ADDRESS - 1; j >= 0; j--) { + if ((*p_enet_addr)[j] != (enet_addr_cont->address)[j]) + break; + if (j == 0) + return enet_addr_cont; /* Found */ + } + enqueue(p_lh, &enet_addr_cont->node); /* Put it back */ + } + return NULL; +} + +static int ugeth_82xx_filtering_add_addr_in_hash(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr) +{ + ucc_geth_enet_address_recognition_location_e location; + enet_addr_container_t *enet_addr_cont; + struct list_head *p_lh; + u8 i; + u32 limit; + u8 *p_counter; + + if ((*p_enet_addr)[0] & ENET_GROUP_ADDR) { + p_lh = &ugeth->group_hash_q; + limit = ugeth->ug_info->maxGroupAddrInHash; + location = + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_GROUP_HASH; + p_counter = &(ugeth->numGroupAddrInHash); + } else { + p_lh = &ugeth->ind_hash_q; + limit = ugeth->ug_info->maxIndAddrInHash; + location = + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_INDIVIDUAL_HASH; + p_counter = &(ugeth->numIndAddrInHash); + } + + if ((enet_addr_cont = + ugeth_82xx_filtering_get_match_addr_in_hash(ugeth, p_enet_addr))) { + list_add(p_lh, &enet_addr_cont->node); /* Put it back */ + return 0; + } + if ((!p_lh) || (!(*p_counter < limit))) + return -EBUSY; + if (!(enet_addr_cont = get_enet_addr_container())) + return -ENOMEM; + for (i = 0; i < ENET_NUM_OCTETS_PER_ADDRESS; i++) + (enet_addr_cont->address)[i] = (*p_enet_addr)[i]; + enet_addr_cont->location = location; + enqueue(p_lh, &enet_addr_cont->node); /* Put it back */ + ++(*p_counter); + + hw_add_addr_in_hash(ugeth, &(enet_addr_cont->address)); + + return 0; +} + +static int ugeth_82xx_filtering_clear_addr_in_hash(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + enet_addr_container_t *enet_addr_cont; + ucc_fast_private_t *uccf; + comm_dir_e comm_dir; + u16 i, num; + struct list_head *p_lh; + u32 *addr_h, *addr_l; + u8 *p_counter; + + uccf = ugeth->uccf; + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + if (! + (enet_addr_cont = + ugeth_82xx_filtering_get_match_addr_in_hash(ugeth, p_enet_addr))) + return -ENOENT; + + /* It's been found and removed from the CQ. */ + /* Now destroy its container */ + put_enet_addr_container(enet_addr_cont); + + if ((*p_enet_addr)[0] & ENET_GROUP_ADDR) { + addr_h = &(p_82xx_addr_filt->gaddr_h); + addr_l = &(p_82xx_addr_filt->gaddr_l); + p_lh = &ugeth->group_hash_q; + p_counter = &(ugeth->numGroupAddrInHash); + } else { + addr_h = &(p_82xx_addr_filt->iaddr_h); + addr_l = &(p_82xx_addr_filt->iaddr_l); + p_lh = &ugeth->ind_hash_q; + p_counter = &(ugeth->numIndAddrInHash); + } + + comm_dir = 0; + if (uccf->enabled_tx) + comm_dir |= COMM_DIR_TX; + if (uccf->enabled_rx) + comm_dir |= COMM_DIR_RX; + if (comm_dir) + ugeth_disable(ugeth, comm_dir); + + /* Clear the hash table. */ + out_be32(addr_h, 0x00000000); + out_be32(addr_l, 0x00000000); + + /* Add all remaining CQ elements back into hash */ + num = --(*p_counter); + for (i = 0; i < num; i++) { + enet_addr_cont = + (enet_addr_container_t *) + ENET_ADDR_CONT_ENTRY(dequeue(p_lh)); + hw_add_addr_in_hash(ugeth, &(enet_addr_cont->address)); + enqueue(p_lh, &enet_addr_cont->node); /* Put it back */ + } + + if (comm_dir) + ugeth_enable(ugeth, comm_dir); + + return 0; +} +#endif /* CONFIG_UGETH_FILTERING */ + +static int ugeth_82xx_filtering_clear_all_addr_in_hash(ucc_geth_private_t * + ugeth, + enet_addr_type_e + enet_addr_type) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + ucc_fast_private_t *uccf; + comm_dir_e comm_dir; + struct list_head *p_lh; + u16 i, num; + u32 *addr_h, *addr_l; + u8 *p_counter; + + uccf = ugeth->uccf; + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + if (enet_addr_type == ENET_ADDR_TYPE_GROUP) { + addr_h = &(p_82xx_addr_filt->gaddr_h); + addr_l = &(p_82xx_addr_filt->gaddr_l); + p_lh = &ugeth->group_hash_q; + p_counter = &(ugeth->numGroupAddrInHash); + } else if (enet_addr_type == ENET_ADDR_TYPE_INDIVIDUAL) { + addr_h = &(p_82xx_addr_filt->iaddr_h); + addr_l = &(p_82xx_addr_filt->iaddr_l); + p_lh = &ugeth->ind_hash_q; + p_counter = &(ugeth->numIndAddrInHash); + } else + return -EINVAL; + + comm_dir = 0; + if (uccf->enabled_tx) + comm_dir |= COMM_DIR_TX; + if (uccf->enabled_rx) + comm_dir |= COMM_DIR_RX; + if (comm_dir) + ugeth_disable(ugeth, comm_dir); + + /* Clear the hash table. */ + out_be32(addr_h, 0x00000000); + out_be32(addr_l, 0x00000000); + + if (!p_lh) + return 0; + + num = *p_counter; + + /* Delete all remaining CQ elements */ + for (i = 0; i < num; i++) + put_enet_addr_container(ENET_ADDR_CONT_ENTRY(dequeue(p_lh))); + + *p_counter = 0; + + if (comm_dir) + ugeth_enable(ugeth, comm_dir); + + return 0; +} + +#ifdef CONFIG_UGETH_FILTERING +static int ugeth_82xx_filtering_add_addr_in_paddr(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr, + u8 paddr_num) +{ + int i; + + if ((*p_enet_addr)[0] & ENET_GROUP_ADDR) + ugeth_warn + ("%s: multicast address added to paddr will have no " + "effect - is this what you wanted?", + __FUNCTION__); + + ugeth->indAddrRegUsed[paddr_num] = 1; /* mark this paddr as used */ + /* store address in our database */ + for (i = 0; i < ENET_NUM_OCTETS_PER_ADDRESS; i++) + ugeth->paddr[paddr_num][i] = (*p_enet_addr)[i]; + /* put in hardware */ + return hw_add_addr_in_paddr(ugeth, p_enet_addr, paddr_num); +} +#endif /* CONFIG_UGETH_FILTERING */ + +static int ugeth_82xx_filtering_clear_addr_in_paddr(ucc_geth_private_t *ugeth, + u8 paddr_num) +{ + ugeth->indAddrRegUsed[paddr_num] = 0; /* mark this paddr as not used */ + return hw_clear_addr_in_paddr(ugeth, paddr_num);/* clear in hardware */ +} + +static void ucc_geth_memclean(ucc_geth_private_t *ugeth) +{ + u16 i, j; + u8 *bd; + + if (!ugeth) + return; + + if (ugeth->uccf) + ucc_fast_free(ugeth->uccf); + + if (ugeth->p_thread_data_tx) { + qe_muram_free(ugeth->thread_dat_tx_offset); + ugeth->p_thread_data_tx = NULL; + } + if (ugeth->p_thread_data_rx) { + qe_muram_free(ugeth->thread_dat_rx_offset); + ugeth->p_thread_data_rx = NULL; + } + if (ugeth->p_exf_glbl_param) { + qe_muram_free(ugeth->exf_glbl_param_offset); + ugeth->p_exf_glbl_param = NULL; + } + if (ugeth->p_rx_glbl_pram) { + qe_muram_free(ugeth->rx_glbl_pram_offset); + ugeth->p_rx_glbl_pram = NULL; + } + if (ugeth->p_tx_glbl_pram) { + qe_muram_free(ugeth->tx_glbl_pram_offset); + ugeth->p_tx_glbl_pram = NULL; + } + if (ugeth->p_send_q_mem_reg) { + qe_muram_free(ugeth->send_q_mem_reg_offset); + ugeth->p_send_q_mem_reg = NULL; + } + if (ugeth->p_scheduler) { + qe_muram_free(ugeth->scheduler_offset); + ugeth->p_scheduler = NULL; + } + if (ugeth->p_tx_fw_statistics_pram) { + qe_muram_free(ugeth->tx_fw_statistics_pram_offset); + ugeth->p_tx_fw_statistics_pram = NULL; + } + if (ugeth->p_rx_fw_statistics_pram) { + qe_muram_free(ugeth->rx_fw_statistics_pram_offset); + ugeth->p_rx_fw_statistics_pram = NULL; + } + if (ugeth->p_rx_irq_coalescing_tbl) { + qe_muram_free(ugeth->rx_irq_coalescing_tbl_offset); + ugeth->p_rx_irq_coalescing_tbl = NULL; + } + if (ugeth->p_rx_bd_qs_tbl) { + qe_muram_free(ugeth->rx_bd_qs_tbl_offset); + ugeth->p_rx_bd_qs_tbl = NULL; + } + if (ugeth->p_init_enet_param_shadow) { + return_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + rxthread[0]), + ENET_INIT_PARAM_MAX_ENTRIES_RX, + ugeth->ug_info->riscRx, 1); + return_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + txthread[0]), + ENET_INIT_PARAM_MAX_ENTRIES_TX, + ugeth->ug_info->riscTx, 0); + kfree(ugeth->p_init_enet_param_shadow); + ugeth->p_init_enet_param_shadow = NULL; + } + for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) { + bd = ugeth->p_tx_bd_ring[i]; + for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) { + if (ugeth->tx_skbuff[i][j]) { + dma_unmap_single(NULL, + BD_BUFFER_ARG(bd), + (BD_STATUS_AND_LENGTH(bd) & + BD_LENGTH_MASK), + DMA_TO_DEVICE); + dev_kfree_skb_any(ugeth->tx_skbuff[i][j]); + ugeth->tx_skbuff[i][j] = NULL; + } + } + + kfree(ugeth->tx_skbuff[i]); + + if (ugeth->p_tx_bd_ring[i]) { + if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_SYSTEM) + kfree((void *)ugeth->tx_bd_ring_offset[i]); + else if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_MURAM) + qe_muram_free(ugeth->tx_bd_ring_offset[i]); + ugeth->p_tx_bd_ring[i] = NULL; + } + } + for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) { + if (ugeth->p_rx_bd_ring[i]) { + /* Return existing data buffers in ring */ + bd = ugeth->p_rx_bd_ring[i]; + for (j = 0; j < ugeth->ug_info->bdRingLenRx[i]; j++) { + if (ugeth->rx_skbuff[i][j]) { + dma_unmap_single(NULL, BD_BUFFER(bd), + ugeth->ug_info-> + uf_info. + max_rx_buf_length + + UCC_GETH_RX_DATA_BUF_ALIGNMENT, + DMA_FROM_DEVICE); + + dev_kfree_skb_any(ugeth-> + rx_skbuff[i][j]); + ugeth->rx_skbuff[i][j] = NULL; + } + bd += UCC_GETH_SIZE_OF_BD; + } + + kfree(ugeth->rx_skbuff[i]); + + if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_SYSTEM) + kfree((void *)ugeth->rx_bd_ring_offset[i]); + else if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_MURAM) + qe_muram_free(ugeth->rx_bd_ring_offset[i]); + ugeth->p_rx_bd_ring[i] = NULL; + } + } + while (!list_empty(&ugeth->group_hash_q)) + put_enet_addr_container(ENET_ADDR_CONT_ENTRY + (dequeue(&ugeth->group_hash_q))); + while (!list_empty(&ugeth->ind_hash_q)) + put_enet_addr_container(ENET_ADDR_CONT_ENTRY + (dequeue(&ugeth->ind_hash_q))); + +} + +static void ucc_geth_set_multi(struct net_device *dev) +{ + ucc_geth_private_t *ugeth; + struct dev_mc_list *dmi; + ucc_fast_t *uf_regs; + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + enet_addr_t tempaddr; + u8 *mcptr, *tdptr; + int i, j; + + ugeth = netdev_priv(dev); + + uf_regs = ugeth->uccf->uf_regs; + + if (dev->flags & IFF_PROMISC) { + + /* Log any net taps. */ + printk("%s: Promiscuous mode enabled.\n", dev->name); + uf_regs->upsmr |= UPSMR_PRO; + + } else { + + uf_regs->upsmr &= ~UPSMR_PRO; + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth-> + p_rx_glbl_pram->addressfiltering; + + if (dev->flags & IFF_ALLMULTI) { + /* Catch all multicast addresses, so set the + * filter to all 1's. + */ + out_be32(&p_82xx_addr_filt->gaddr_h, 0xffffffff); + out_be32(&p_82xx_addr_filt->gaddr_l, 0xffffffff); + } else { + /* Clear filter and add the addresses in the list. + */ + out_be32(&p_82xx_addr_filt->gaddr_h, 0x0); + out_be32(&p_82xx_addr_filt->gaddr_l, 0x0); + + dmi = dev->mc_list; + + for (i = 0; i < dev->mc_count; i++, dmi = dmi->next) { + + /* Only support group multicast for now. + */ + if (!(dmi->dmi_addr[0] & 1)) + continue; + + /* The address in dmi_addr is LSB first, + * and taddr is MSB first. We have to + * copy bytes MSB first from dmi_addr. + */ + mcptr = (u8 *) dmi->dmi_addr + 5; + tdptr = (u8 *) & tempaddr; + for (j = 0; j < 6; j++) + *tdptr++ = *mcptr--; + + /* Ask CPM to run CRC and set bit in + * filter mask. + */ + hw_add_addr_in_hash(ugeth, &tempaddr); + + } + } + } +} + +static void ucc_geth_stop(ucc_geth_private_t *ugeth) +{ + ucc_geth_t *ug_regs = ugeth->ug_regs; + u32 tempval; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + /* Disable the controller */ + ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); + + /* Tell the kernel the link is down */ + ugeth->mii_info->link = 0; + adjust_link(ugeth->dev); + + /* Mask all interrupts */ + out_be32(ugeth->uccf->p_ucce, 0x00000000); + + /* Clear all interrupts */ + out_be32(ugeth->uccf->p_ucce, 0xffffffff); + + /* Disable Rx and Tx */ + tempval = in_be32(&ug_regs->maccfg1); + tempval &= ~(MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX); + out_be32(&ug_regs->maccfg1, tempval); + + if (ugeth->ug_info->board_flags & FSL_UGETH_BRD_HAS_PHY_INTR) { + /* Clear any pending interrupts */ + mii_clear_phy_interrupt(ugeth->mii_info); + + /* Disable PHY Interrupts */ + mii_configure_phy_interrupt(ugeth->mii_info, + MII_INTERRUPT_DISABLED); + } + + free_irq(ugeth->ug_info->uf_info.irq, ugeth->dev); + + if (ugeth->ug_info->board_flags & FSL_UGETH_BRD_HAS_PHY_INTR) { + free_irq(ugeth->ug_info->phy_interrupt, ugeth->dev); + } else { + del_timer_sync(&ugeth->phy_info_timer); + } + + ucc_geth_memclean(ugeth); +} + +static int ucc_geth_startup(ucc_geth_private_t *ugeth) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + ucc_geth_init_pram_t *p_init_enet_pram; + ucc_fast_private_t *uccf; + ucc_geth_info_t *ug_info; + ucc_fast_info_t *uf_info; + ucc_fast_t *uf_regs; + ucc_geth_t *ug_regs; + int ret_val = -EINVAL; + u32 remoder = UCC_GETH_REMODER_INIT; + u32 init_enet_pram_offset, cecr_subblock, command, maccfg1; + u32 ifstat, i, j, size, l2qt, l3qt, length; + u16 temoder = UCC_GETH_TEMODER_INIT; + u16 test; + u8 function_code = 0; + u8 *bd, *endOfRing; + u8 numThreadsRxNumerical, numThreadsTxNumerical; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ug_info = ugeth->ug_info; + uf_info = &ug_info->uf_info; + + if (!((uf_info->bd_mem_part == MEM_PART_SYSTEM) || + (uf_info->bd_mem_part == MEM_PART_MURAM))) { + ugeth_err("%s: Bad memory partition value.", __FUNCTION__); + return -EINVAL; + } + + /* Rx BD lengths */ + for (i = 0; i < ug_info->numQueuesRx; i++) { + if ((ug_info->bdRingLenRx[i] < UCC_GETH_RX_BD_RING_SIZE_MIN) || + (ug_info->bdRingLenRx[i] % + UCC_GETH_RX_BD_RING_SIZE_ALIGNMENT)) { + ugeth_err + ("%s: Rx BD ring length must be multiple of 4," + " no smaller than 8.", __FUNCTION__); + return -EINVAL; + } + } + + /* Tx BD lengths */ + for (i = 0; i < ug_info->numQueuesTx; i++) { + if (ug_info->bdRingLenTx[i] < UCC_GETH_TX_BD_RING_SIZE_MIN) { + ugeth_err + ("%s: Tx BD ring length must be no smaller than 2.", + __FUNCTION__); + return -EINVAL; + } + } + + /* mrblr */ + if ((uf_info->max_rx_buf_length == 0) || + (uf_info->max_rx_buf_length % UCC_GETH_MRBLR_ALIGNMENT)) { + ugeth_err + ("%s: max_rx_buf_length must be non-zero multiple of 128.", + __FUNCTION__); + return -EINVAL; + } + + /* num Tx queues */ + if (ug_info->numQueuesTx > NUM_TX_QUEUES) { + ugeth_err("%s: number of tx queues too large.", __FUNCTION__); + return -EINVAL; + } + + /* num Rx queues */ + if (ug_info->numQueuesRx > NUM_RX_QUEUES) { + ugeth_err("%s: number of rx queues too large.", __FUNCTION__); + return -EINVAL; + } + + /* l2qt */ + for (i = 0; i < UCC_GETH_VLAN_PRIORITY_MAX; i++) { + if (ug_info->l2qt[i] >= ug_info->numQueuesRx) { + ugeth_err + ("%s: VLAN priority table entry must not be" + " larger than number of Rx queues.", + __FUNCTION__); + return -EINVAL; + } + } + + /* l3qt */ + for (i = 0; i < UCC_GETH_IP_PRIORITY_MAX; i++) { + if (ug_info->l3qt[i] >= ug_info->numQueuesRx) { + ugeth_err + ("%s: IP priority table entry must not be" + " larger than number of Rx queues.", + __FUNCTION__); + return -EINVAL; + } + } + + if (ug_info->cam && !ug_info->ecamptr) { + ugeth_err("%s: If cam mode is chosen, must supply cam ptr.", + __FUNCTION__); + return -EINVAL; + } + + if ((ug_info->numStationAddresses != + UCC_GETH_NUM_OF_STATION_ADDRESSES_1) + && ug_info->rxExtendedFiltering) { + ugeth_err("%s: Number of station addresses greater than 1 " + "not allowed in extended parsing mode.", + __FUNCTION__); + return -EINVAL; + } + + /* Generate uccm_mask for receive */ + uf_info->uccm_mask = ug_info->eventRegMask & UCCE_OTHER;/* Errors */ + for (i = 0; i < ug_info->numQueuesRx; i++) + uf_info->uccm_mask |= (UCCE_RXBF_SINGLE_MASK << i); + + for (i = 0; i < ug_info->numQueuesTx; i++) + uf_info->uccm_mask |= (UCCE_TXBF_SINGLE_MASK << i); + /* Initialize the general fast UCC block. */ + if (ucc_fast_init(uf_info, &uccf)) { + ugeth_err("%s: Failed to init uccf.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->uccf = uccf; + + switch (ug_info->numThreadsRx) { + case UCC_GETH_NUM_OF_THREADS_1: + numThreadsRxNumerical = 1; + break; + case UCC_GETH_NUM_OF_THREADS_2: + numThreadsRxNumerical = 2; + break; + case UCC_GETH_NUM_OF_THREADS_4: + numThreadsRxNumerical = 4; + break; + case UCC_GETH_NUM_OF_THREADS_6: + numThreadsRxNumerical = 6; + break; + case UCC_GETH_NUM_OF_THREADS_8: + numThreadsRxNumerical = 8; + break; + default: + ugeth_err("%s: Bad number of Rx threads value.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -EINVAL; + break; + } + + switch (ug_info->numThreadsTx) { + case UCC_GETH_NUM_OF_THREADS_1: + numThreadsTxNumerical = 1; + break; + case UCC_GETH_NUM_OF_THREADS_2: + numThreadsTxNumerical = 2; + break; + case UCC_GETH_NUM_OF_THREADS_4: + numThreadsTxNumerical = 4; + break; + case UCC_GETH_NUM_OF_THREADS_6: + numThreadsTxNumerical = 6; + break; + case UCC_GETH_NUM_OF_THREADS_8: + numThreadsTxNumerical = 8; + break; + default: + ugeth_err("%s: Bad number of Tx threads value.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -EINVAL; + break; + } + + /* Calculate rx_extended_features */ + ugeth->rx_non_dynamic_extended_features = ug_info->ipCheckSumCheck || + ug_info->ipAddressAlignment || + (ug_info->numStationAddresses != + UCC_GETH_NUM_OF_STATION_ADDRESSES_1); + + ugeth->rx_extended_features = ugeth->rx_non_dynamic_extended_features || + (ug_info->vlanOperationTagged != UCC_GETH_VLAN_OPERATION_TAGGED_NOP) + || (ug_info->vlanOperationNonTagged != + UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP); + + uf_regs = uccf->uf_regs; + ug_regs = (ucc_geth_t *) (uccf->uf_regs); + ugeth->ug_regs = ug_regs; + + init_default_reg_vals(&uf_regs->upsmr, + &ug_regs->maccfg1, &ug_regs->maccfg2); + + /* Set UPSMR */ + /* For more details see the hardware spec. */ + init_rx_parameters(ug_info->bro, + ug_info->rsh, ug_info->pro, &uf_regs->upsmr); + + /* We're going to ignore other registers for now, */ + /* except as needed to get up and running */ + + /* Set MACCFG1 */ + /* For more details see the hardware spec. */ + init_flow_control_params(ug_info->aufc, + ug_info->receiveFlowControl, + 1, + ug_info->pausePeriod, + ug_info->extensionField, + &uf_regs->upsmr, + &ug_regs->uempr, &ug_regs->maccfg1); + + maccfg1 = in_be32(&ug_regs->maccfg1); + maccfg1 |= MACCFG1_ENABLE_RX; + maccfg1 |= MACCFG1_ENABLE_TX; + out_be32(&ug_regs->maccfg1, maccfg1); + + /* Set IPGIFG */ + /* For more details see the hardware spec. */ + ret_val = init_inter_frame_gap_params(ug_info->nonBackToBackIfgPart1, + ug_info->nonBackToBackIfgPart2, + ug_info-> + miminumInterFrameGapEnforcement, + ug_info->backToBackInterFrameGap, + &ug_regs->ipgifg); + if (ret_val != 0) { + ugeth_err("%s: IPGIFG initialization parameter too large.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + + /* Set HAFDUP */ + /* For more details see the hardware spec. */ + ret_val = init_half_duplex_params(ug_info->altBeb, + ug_info->backPressureNoBackoff, + ug_info->noBackoff, + ug_info->excessDefer, + ug_info->altBebTruncation, + ug_info->maxRetransmission, + ug_info->collisionWindow, + &ug_regs->hafdup); + if (ret_val != 0) { + ugeth_err("%s: Half Duplex initialization parameter too large.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + + /* Set IFSTAT */ + /* For more details see the hardware spec. */ + /* Read only - resets upon read */ + ifstat = in_be32(&ug_regs->ifstat); + + /* Clear UEMPR */ + /* For more details see the hardware spec. */ + out_be32(&ug_regs->uempr, 0); + + /* Set UESCR */ + /* For more details see the hardware spec. */ + init_hw_statistics_gathering_mode((ug_info->statisticsMode & + UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE), + 0, &uf_regs->upsmr, &ug_regs->uescr); + + /* Allocate Tx bds */ + for (j = 0; j < ug_info->numQueuesTx; j++) { + /* Allocate in multiple of + UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT, + according to spec */ + length = ((ug_info->bdRingLenTx[j] * UCC_GETH_SIZE_OF_BD) + / UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) + * UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; + if ((ug_info->bdRingLenTx[j] * UCC_GETH_SIZE_OF_BD) % + UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) + length += UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; + if (uf_info->bd_mem_part == MEM_PART_SYSTEM) { + u32 align = 4; + if (UCC_GETH_TX_BD_RING_ALIGNMENT > 4) + align = UCC_GETH_TX_BD_RING_ALIGNMENT; + ugeth->tx_bd_ring_offset[j] = + (u32) (kmalloc((u32) (length + align), + GFP_KERNEL)); + if (ugeth->tx_bd_ring_offset[j] != 0) + ugeth->p_tx_bd_ring[j] = + (void*)((ugeth->tx_bd_ring_offset[j] + + align) & ~(align - 1)); + } else if (uf_info->bd_mem_part == MEM_PART_MURAM) { + ugeth->tx_bd_ring_offset[j] = + qe_muram_alloc(length, + UCC_GETH_TX_BD_RING_ALIGNMENT); + if (!IS_MURAM_ERR(ugeth->tx_bd_ring_offset[j])) + ugeth->p_tx_bd_ring[j] = + (u8 *) qe_muram_addr(ugeth-> + tx_bd_ring_offset[j]); + } + if (!ugeth->p_tx_bd_ring[j]) { + ugeth_err + ("%s: Can not allocate memory for Tx bd rings.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + /* Zero unused end of bd ring, according to spec */ + memset(ugeth->p_tx_bd_ring[j] + + ug_info->bdRingLenTx[j] * UCC_GETH_SIZE_OF_BD, 0, + length - ug_info->bdRingLenTx[j] * UCC_GETH_SIZE_OF_BD); + } + + /* Allocate Rx bds */ + for (j = 0; j < ug_info->numQueuesRx; j++) { + length = ug_info->bdRingLenRx[j] * UCC_GETH_SIZE_OF_BD; + if (uf_info->bd_mem_part == MEM_PART_SYSTEM) { + u32 align = 4; + if (UCC_GETH_RX_BD_RING_ALIGNMENT > 4) + align = UCC_GETH_RX_BD_RING_ALIGNMENT; + ugeth->rx_bd_ring_offset[j] = + (u32) (kmalloc((u32) (length + align), GFP_KERNEL)); + if (ugeth->rx_bd_ring_offset[j] != 0) + ugeth->p_rx_bd_ring[j] = + (void*)((ugeth->rx_bd_ring_offset[j] + + align) & ~(align - 1)); + } else if (uf_info->bd_mem_part == MEM_PART_MURAM) { + ugeth->rx_bd_ring_offset[j] = + qe_muram_alloc(length, + UCC_GETH_RX_BD_RING_ALIGNMENT); + if (!IS_MURAM_ERR(ugeth->rx_bd_ring_offset[j])) + ugeth->p_rx_bd_ring[j] = + (u8 *) qe_muram_addr(ugeth-> + rx_bd_ring_offset[j]); + } + if (!ugeth->p_rx_bd_ring[j]) { + ugeth_err + ("%s: Can not allocate memory for Rx bd rings.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + } + + /* Init Tx bds */ + for (j = 0; j < ug_info->numQueuesTx; j++) { + /* Setup the skbuff rings */ + ugeth->tx_skbuff[j] = + (struct sk_buff **)kmalloc(sizeof(struct sk_buff *) * + ugeth->ug_info->bdRingLenTx[j], + GFP_KERNEL); + + if (ugeth->tx_skbuff[j] == NULL) { + ugeth_err("%s: Could not allocate tx_skbuff", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + for (i = 0; i < ugeth->ug_info->bdRingLenTx[j]; i++) + ugeth->tx_skbuff[j][i] = NULL; + + ugeth->skb_curtx[j] = ugeth->skb_dirtytx[j] = 0; + bd = ugeth->confBd[j] = ugeth->txBd[j] = ugeth->p_tx_bd_ring[j]; + for (i = 0; i < ug_info->bdRingLenTx[j]; i++) { + BD_BUFFER_CLEAR(bd); + BD_STATUS_AND_LENGTH_SET(bd, 0); + bd += UCC_GETH_SIZE_OF_BD; + } + bd -= UCC_GETH_SIZE_OF_BD; + BD_STATUS_AND_LENGTH_SET(bd, T_W);/* for last BD set Wrap bit */ + } + + /* Init Rx bds */ + for (j = 0; j < ug_info->numQueuesRx; j++) { + /* Setup the skbuff rings */ + ugeth->rx_skbuff[j] = + (struct sk_buff **)kmalloc(sizeof(struct sk_buff *) * + ugeth->ug_info->bdRingLenRx[j], + GFP_KERNEL); + + if (ugeth->rx_skbuff[j] == NULL) { + ugeth_err("%s: Could not allocate rx_skbuff", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + for (i = 0; i < ugeth->ug_info->bdRingLenRx[j]; i++) + ugeth->rx_skbuff[j][i] = NULL; + + ugeth->skb_currx[j] = 0; + bd = ugeth->rxBd[j] = ugeth->p_rx_bd_ring[j]; + for (i = 0; i < ug_info->bdRingLenRx[j]; i++) { + BD_STATUS_AND_LENGTH_SET(bd, R_I); + BD_BUFFER_CLEAR(bd); + bd += UCC_GETH_SIZE_OF_BD; + } + bd -= UCC_GETH_SIZE_OF_BD; + BD_STATUS_AND_LENGTH_SET(bd, R_W);/* for last BD set Wrap bit */ + } + + /* + * Global PRAM + */ + /* Tx global PRAM */ + /* Allocate global tx parameter RAM page */ + ugeth->tx_glbl_pram_offset = + qe_muram_alloc(sizeof(ucc_geth_tx_global_pram_t), + UCC_GETH_TX_GLOBAL_PRAM_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->tx_glbl_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_tx_glbl_pram.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->p_tx_glbl_pram = + (ucc_geth_tx_global_pram_t *) qe_muram_addr(ugeth-> + tx_glbl_pram_offset); + /* Zero out p_tx_glbl_pram */ + memset(ugeth->p_tx_glbl_pram, 0, sizeof(ucc_geth_tx_global_pram_t)); + + /* Fill global PRAM */ + + /* TQPTR */ + /* Size varies with number of Tx threads */ + ugeth->thread_dat_tx_offset = + qe_muram_alloc(numThreadsTxNumerical * + sizeof(ucc_geth_thread_data_tx_t) + + 32 * (numThreadsTxNumerical == 1), + UCC_GETH_THREAD_DATA_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->thread_dat_tx_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_thread_data_tx.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_thread_data_tx = + (ucc_geth_thread_data_tx_t *) qe_muram_addr(ugeth-> + thread_dat_tx_offset); + out_be32(&ugeth->p_tx_glbl_pram->tqptr, ugeth->thread_dat_tx_offset); + + /* vtagtable */ + for (i = 0; i < UCC_GETH_TX_VTAG_TABLE_ENTRY_MAX; i++) + out_be32(&ugeth->p_tx_glbl_pram->vtagtable[i], + ug_info->vtagtable[i]); + + /* iphoffset */ + for (i = 0; i < TX_IP_OFFSET_ENTRY_MAX; i++) + ugeth->p_tx_glbl_pram->iphoffset[i] = ug_info->iphoffset[i]; + + /* SQPTR */ + /* Size varies with number of Tx queues */ + ugeth->send_q_mem_reg_offset = + qe_muram_alloc(ug_info->numQueuesTx * + sizeof(ucc_geth_send_queue_qd_t), + UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->send_q_mem_reg_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_send_q_mem_reg.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_send_q_mem_reg = + (ucc_geth_send_queue_mem_region_t *) qe_muram_addr(ugeth-> + send_q_mem_reg_offset); + out_be32(&ugeth->p_tx_glbl_pram->sqptr, ugeth->send_q_mem_reg_offset); + + /* Setup the table */ + /* Assume BD rings are already established */ + for (i = 0; i < ug_info->numQueuesTx; i++) { + endOfRing = + ugeth->p_tx_bd_ring[i] + (ug_info->bdRingLenTx[i] - + 1) * UCC_GETH_SIZE_OF_BD; + if (ugeth->ug_info->uf_info.bd_mem_part == MEM_PART_SYSTEM) { + out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].bd_ring_base, + (u32) virt_to_phys(ugeth->p_tx_bd_ring[i])); + out_be32(&ugeth->p_send_q_mem_reg->sqqd[i]. + last_bd_completed_address, + (u32) virt_to_phys(endOfRing)); + } else if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_MURAM) { + out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].bd_ring_base, + (u32) immrbar_virt_to_phys(ugeth-> + p_tx_bd_ring[i])); + out_be32(&ugeth->p_send_q_mem_reg->sqqd[i]. + last_bd_completed_address, + (u32) immrbar_virt_to_phys(endOfRing)); + } + } + + /* schedulerbasepointer */ + + if (ug_info->numQueuesTx > 1) { + /* scheduler exists only if more than 1 tx queue */ + ugeth->scheduler_offset = + qe_muram_alloc(sizeof(ucc_geth_scheduler_t), + UCC_GETH_SCHEDULER_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->scheduler_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_scheduler.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_scheduler = + (ucc_geth_scheduler_t *) qe_muram_addr(ugeth-> + scheduler_offset); + out_be32(&ugeth->p_tx_glbl_pram->schedulerbasepointer, + ugeth->scheduler_offset); + /* Zero out p_scheduler */ + memset(ugeth->p_scheduler, 0, sizeof(ucc_geth_scheduler_t)); + + /* Set values in scheduler */ + out_be32(&ugeth->p_scheduler->mblinterval, + ug_info->mblinterval); + out_be16(&ugeth->p_scheduler->nortsrbytetime, + ug_info->nortsrbytetime); + ugeth->p_scheduler->fracsiz = ug_info->fracsiz; + ugeth->p_scheduler->strictpriorityq = ug_info->strictpriorityq; + ugeth->p_scheduler->txasap = ug_info->txasap; + ugeth->p_scheduler->extrabw = ug_info->extrabw; + for (i = 0; i < NUM_TX_QUEUES; i++) + ugeth->p_scheduler->weightfactor[i] = + ug_info->weightfactor[i]; + + /* Set pointers to cpucount registers in scheduler */ + ugeth->p_cpucount[0] = &(ugeth->p_scheduler->cpucount0); + ugeth->p_cpucount[1] = &(ugeth->p_scheduler->cpucount1); + ugeth->p_cpucount[2] = &(ugeth->p_scheduler->cpucount2); + ugeth->p_cpucount[3] = &(ugeth->p_scheduler->cpucount3); + ugeth->p_cpucount[4] = &(ugeth->p_scheduler->cpucount4); + ugeth->p_cpucount[5] = &(ugeth->p_scheduler->cpucount5); + ugeth->p_cpucount[6] = &(ugeth->p_scheduler->cpucount6); + ugeth->p_cpucount[7] = &(ugeth->p_scheduler->cpucount7); + } + + /* schedulerbasepointer */ + /* TxRMON_PTR (statistics) */ + if (ug_info-> + statisticsMode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { + ugeth->tx_fw_statistics_pram_offset = + qe_muram_alloc(sizeof + (ucc_geth_tx_firmware_statistics_pram_t), + UCC_GETH_TX_STATISTICS_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->tx_fw_statistics_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for" + " p_tx_fw_statistics_pram.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->p_tx_fw_statistics_pram = + (ucc_geth_tx_firmware_statistics_pram_t *) + qe_muram_addr(ugeth->tx_fw_statistics_pram_offset); + /* Zero out p_tx_fw_statistics_pram */ + memset(ugeth->p_tx_fw_statistics_pram, + 0, sizeof(ucc_geth_tx_firmware_statistics_pram_t)); + } + + /* temoder */ + /* Already has speed set */ + + if (ug_info->numQueuesTx > 1) + temoder |= TEMODER_SCHEDULER_ENABLE; + if (ug_info->ipCheckSumGenerate) + temoder |= TEMODER_IP_CHECKSUM_GENERATE; + temoder |= ((ug_info->numQueuesTx - 1) << TEMODER_NUM_OF_QUEUES_SHIFT); + out_be16(&ugeth->p_tx_glbl_pram->temoder, temoder); + + test = in_be16(&ugeth->p_tx_glbl_pram->temoder); + + /* Function code register value to be used later */ + function_code = QE_BMR_BYTE_ORDER_BO_MOT | UCC_FAST_FUNCTION_CODE_GBL; + /* Required for QE */ + + /* function code register */ + out_be32(&ugeth->p_tx_glbl_pram->tstate, ((u32) function_code) << 24); + + /* Rx global PRAM */ + /* Allocate global rx parameter RAM page */ + ugeth->rx_glbl_pram_offset = + qe_muram_alloc(sizeof(ucc_geth_rx_global_pram_t), + UCC_GETH_RX_GLOBAL_PRAM_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->rx_glbl_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_rx_glbl_pram.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->p_rx_glbl_pram = + (ucc_geth_rx_global_pram_t *) qe_muram_addr(ugeth-> + rx_glbl_pram_offset); + /* Zero out p_rx_glbl_pram */ + memset(ugeth->p_rx_glbl_pram, 0, sizeof(ucc_geth_rx_global_pram_t)); + + /* Fill global PRAM */ + + /* RQPTR */ + /* Size varies with number of Rx threads */ + ugeth->thread_dat_rx_offset = + qe_muram_alloc(numThreadsRxNumerical * + sizeof(ucc_geth_thread_data_rx_t), + UCC_GETH_THREAD_DATA_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->thread_dat_rx_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_thread_data_rx.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_thread_data_rx = + (ucc_geth_thread_data_rx_t *) qe_muram_addr(ugeth-> + thread_dat_rx_offset); + out_be32(&ugeth->p_rx_glbl_pram->rqptr, ugeth->thread_dat_rx_offset); + + /* typeorlen */ + out_be16(&ugeth->p_rx_glbl_pram->typeorlen, ug_info->typeorlen); + + /* rxrmonbaseptr (statistics) */ + if (ug_info-> + statisticsMode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { + ugeth->rx_fw_statistics_pram_offset = + qe_muram_alloc(sizeof + (ucc_geth_rx_firmware_statistics_pram_t), + UCC_GETH_RX_STATISTICS_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->rx_fw_statistics_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for" + " p_rx_fw_statistics_pram.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->p_rx_fw_statistics_pram = + (ucc_geth_rx_firmware_statistics_pram_t *) + qe_muram_addr(ugeth->rx_fw_statistics_pram_offset); + /* Zero out p_rx_fw_statistics_pram */ + memset(ugeth->p_rx_fw_statistics_pram, 0, + sizeof(ucc_geth_rx_firmware_statistics_pram_t)); + } + + /* intCoalescingPtr */ + + /* Size varies with number of Rx queues */ + ugeth->rx_irq_coalescing_tbl_offset = + qe_muram_alloc(ug_info->numQueuesRx * + sizeof(ucc_geth_rx_interrupt_coalescing_entry_t), + UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->rx_irq_coalescing_tbl_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for" + " p_rx_irq_coalescing_tbl.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_rx_irq_coalescing_tbl = + (ucc_geth_rx_interrupt_coalescing_table_t *) + qe_muram_addr(ugeth->rx_irq_coalescing_tbl_offset); + out_be32(&ugeth->p_rx_glbl_pram->intcoalescingptr, + ugeth->rx_irq_coalescing_tbl_offset); + + /* Fill interrupt coalescing table */ + for (i = 0; i < ug_info->numQueuesRx; i++) { + out_be32(&ugeth->p_rx_irq_coalescing_tbl->coalescingentry[i]. + interruptcoalescingmaxvalue, + ug_info->interruptcoalescingmaxvalue[i]); + out_be32(&ugeth->p_rx_irq_coalescing_tbl->coalescingentry[i]. + interruptcoalescingcounter, + ug_info->interruptcoalescingmaxvalue[i]); + } + + /* MRBLR */ + init_max_rx_buff_len(uf_info->max_rx_buf_length, + &ugeth->p_rx_glbl_pram->mrblr); + /* MFLR */ + out_be16(&ugeth->p_rx_glbl_pram->mflr, ug_info->maxFrameLength); + /* MINFLR */ + init_min_frame_len(ug_info->minFrameLength, + &ugeth->p_rx_glbl_pram->minflr, + &ugeth->p_rx_glbl_pram->mrblr); + /* MAXD1 */ + out_be16(&ugeth->p_rx_glbl_pram->maxd1, ug_info->maxD1Length); + /* MAXD2 */ + out_be16(&ugeth->p_rx_glbl_pram->maxd2, ug_info->maxD2Length); + + /* l2qt */ + l2qt = 0; + for (i = 0; i < UCC_GETH_VLAN_PRIORITY_MAX; i++) + l2qt |= (ug_info->l2qt[i] << (28 - 4 * i)); + out_be32(&ugeth->p_rx_glbl_pram->l2qt, l2qt); + + /* l3qt */ + for (j = 0; j < UCC_GETH_IP_PRIORITY_MAX; j += 8) { + l3qt = 0; + for (i = 0; i < 8; i++) + l3qt |= (ug_info->l3qt[j + i] << (28 - 4 * i)); + out_be32(&ugeth->p_rx_glbl_pram->l3qt[j], l3qt); + } + + /* vlantype */ + out_be16(&ugeth->p_rx_glbl_pram->vlantype, ug_info->vlantype); + + /* vlantci */ + out_be16(&ugeth->p_rx_glbl_pram->vlantci, ug_info->vlantci); + + /* ecamptr */ + out_be32(&ugeth->p_rx_glbl_pram->ecamptr, ug_info->ecamptr); + + /* RBDQPTR */ + /* Size varies with number of Rx queues */ + ugeth->rx_bd_qs_tbl_offset = + qe_muram_alloc(ug_info->numQueuesRx * + (sizeof(ucc_geth_rx_bd_queues_entry_t) + + sizeof(ucc_geth_rx_prefetched_bds_t)), + UCC_GETH_RX_BD_QUEUES_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->rx_bd_qs_tbl_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_rx_bd_qs_tbl.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_rx_bd_qs_tbl = + (ucc_geth_rx_bd_queues_entry_t *) qe_muram_addr(ugeth-> + rx_bd_qs_tbl_offset); + out_be32(&ugeth->p_rx_glbl_pram->rbdqptr, ugeth->rx_bd_qs_tbl_offset); + /* Zero out p_rx_bd_qs_tbl */ + memset(ugeth->p_rx_bd_qs_tbl, + 0, + ug_info->numQueuesRx * (sizeof(ucc_geth_rx_bd_queues_entry_t) + + sizeof(ucc_geth_rx_prefetched_bds_t))); + + /* Setup the table */ + /* Assume BD rings are already established */ + for (i = 0; i < ug_info->numQueuesRx; i++) { + if (ugeth->ug_info->uf_info.bd_mem_part == MEM_PART_SYSTEM) { + out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr, + (u32) virt_to_phys(ugeth->p_rx_bd_ring[i])); + } else if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_MURAM) { + out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr, + (u32) immrbar_virt_to_phys(ugeth-> + p_rx_bd_ring[i])); + } + /* rest of fields handled by QE */ + } + + /* remoder */ + /* Already has speed set */ + + if (ugeth->rx_extended_features) + remoder |= REMODER_RX_EXTENDED_FEATURES; + if (ug_info->rxExtendedFiltering) + remoder |= REMODER_RX_EXTENDED_FILTERING; + if (ug_info->dynamicMaxFrameLength) + remoder |= REMODER_DYNAMIC_MAX_FRAME_LENGTH; + if (ug_info->dynamicMinFrameLength) + remoder |= REMODER_DYNAMIC_MIN_FRAME_LENGTH; + remoder |= + ug_info->vlanOperationTagged << REMODER_VLAN_OPERATION_TAGGED_SHIFT; + remoder |= + ug_info-> + vlanOperationNonTagged << REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT; + remoder |= ug_info->rxQoSMode << REMODER_RX_QOS_MODE_SHIFT; + remoder |= ((ug_info->numQueuesRx - 1) << REMODER_NUM_OF_QUEUES_SHIFT); + if (ug_info->ipCheckSumCheck) + remoder |= REMODER_IP_CHECKSUM_CHECK; + if (ug_info->ipAddressAlignment) + remoder |= REMODER_IP_ADDRESS_ALIGNMENT; + out_be32(&ugeth->p_rx_glbl_pram->remoder, remoder); + + /* Note that this function must be called */ + /* ONLY AFTER p_tx_fw_statistics_pram */ + /* andp_UccGethRxFirmwareStatisticsPram are allocated ! */ + init_firmware_statistics_gathering_mode((ug_info-> + statisticsMode & + UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX), + (ug_info->statisticsMode & + UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX), + &ugeth->p_tx_glbl_pram->txrmonbaseptr, + ugeth->tx_fw_statistics_pram_offset, + &ugeth->p_rx_glbl_pram->rxrmonbaseptr, + ugeth->rx_fw_statistics_pram_offset, + &ugeth->p_tx_glbl_pram->temoder, + &ugeth->p_rx_glbl_pram->remoder); + + /* function code register */ + ugeth->p_rx_glbl_pram->rstate = function_code; + + /* initialize extended filtering */ + if (ug_info->rxExtendedFiltering) { + if (!ug_info->extendedFilteringChainPointer) { + ugeth_err("%s: Null Extended Filtering Chain Pointer.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -EINVAL; + } + + /* Allocate memory for extended filtering Mode Global + Parameters */ + ugeth->exf_glbl_param_offset = + qe_muram_alloc(sizeof(ucc_geth_exf_global_pram_t), + UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->exf_glbl_param_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for" + " p_exf_glbl_param.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_exf_glbl_param = + (ucc_geth_exf_global_pram_t *) qe_muram_addr(ugeth-> + exf_glbl_param_offset); + out_be32(&ugeth->p_rx_glbl_pram->exfGlobalParam, + ugeth->exf_glbl_param_offset); + out_be32(&ugeth->p_exf_glbl_param->l2pcdptr, + (u32) ug_info->extendedFilteringChainPointer); + + } else { /* initialize 82xx style address filtering */ + + /* Init individual address recognition registers to disabled */ + + for (j = 0; j < NUM_OF_PADDRS; j++) + ugeth_82xx_filtering_clear_addr_in_paddr(ugeth, (u8) j); + + /* Create CQs for hash tables */ + if (ug_info->maxGroupAddrInHash > 0) { + INIT_LIST_HEAD(&ugeth->group_hash_q); + } + if (ug_info->maxIndAddrInHash > 0) { + INIT_LIST_HEAD(&ugeth->ind_hash_q); + } + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth-> + p_rx_glbl_pram->addressfiltering; + + ugeth_82xx_filtering_clear_all_addr_in_hash(ugeth, + ENET_ADDR_TYPE_GROUP); + ugeth_82xx_filtering_clear_all_addr_in_hash(ugeth, + ENET_ADDR_TYPE_INDIVIDUAL); + } + + /* + * Initialize UCC at QE level + */ + + command = QE_INIT_TX_RX; + + /* Allocate shadow InitEnet command parameter structure. + * This is needed because after the InitEnet command is executed, + * the structure in DPRAM is released, because DPRAM is a premium + * resource. + * This shadow structure keeps a copy of what was done so that the + * allocated resources can be released when the channel is freed. + */ + if (!(ugeth->p_init_enet_param_shadow = + (ucc_geth_init_pram_t *) kmalloc(sizeof(ucc_geth_init_pram_t), + GFP_KERNEL))) { + ugeth_err + ("%s: Can not allocate memory for" + " p_UccInitEnetParamShadows.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + /* Zero out *p_init_enet_param_shadow */ + memset((char *)ugeth->p_init_enet_param_shadow, + 0, sizeof(ucc_geth_init_pram_t)); + + /* Fill shadow InitEnet command parameter structure */ + + ugeth->p_init_enet_param_shadow->resinit1 = + ENET_INIT_PARAM_MAGIC_RES_INIT1; + ugeth->p_init_enet_param_shadow->resinit2 = + ENET_INIT_PARAM_MAGIC_RES_INIT2; + ugeth->p_init_enet_param_shadow->resinit3 = + ENET_INIT_PARAM_MAGIC_RES_INIT3; + ugeth->p_init_enet_param_shadow->resinit4 = + ENET_INIT_PARAM_MAGIC_RES_INIT4; + ugeth->p_init_enet_param_shadow->resinit5 = + ENET_INIT_PARAM_MAGIC_RES_INIT5; + ugeth->p_init_enet_param_shadow->rgftgfrxglobal |= + ((u32) ug_info->numThreadsRx) << ENET_INIT_PARAM_RGF_SHIFT; + ugeth->p_init_enet_param_shadow->rgftgfrxglobal |= + ((u32) ug_info->numThreadsTx) << ENET_INIT_PARAM_TGF_SHIFT; + + ugeth->p_init_enet_param_shadow->rgftgfrxglobal |= + ugeth->rx_glbl_pram_offset | ug_info->riscRx; + if ((ug_info->largestexternallookupkeysize != + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE) + && (ug_info->largestexternallookupkeysize != + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES) + && (ug_info->largestexternallookupkeysize != + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES)) { + ugeth_err("%s: Invalid largest External Lookup Key Size.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -EINVAL; + } + ugeth->p_init_enet_param_shadow->largestexternallookupkeysize = + ug_info->largestexternallookupkeysize; + size = sizeof(ucc_geth_thread_rx_pram_t); + if (ug_info->rxExtendedFiltering) { + size += THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING; + if (ug_info->largestexternallookupkeysize == + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES) + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_8; + if (ug_info->largestexternallookupkeysize == + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES) + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_16; + } + + if ((ret_val = fill_init_enet_entries(ugeth, &(ugeth-> + p_init_enet_param_shadow->rxthread[0]), + (u8) (numThreadsRxNumerical + 1) + /* Rx needs one extra for terminator */ + , size, UCC_GETH_THREAD_RX_PRAM_ALIGNMENT, + ug_info->riscRx, 1)) != 0) { + ugeth_err("%s: Can not fill p_init_enet_param_shadow.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + + ugeth->p_init_enet_param_shadow->txglobal = + ugeth->tx_glbl_pram_offset | ug_info->riscTx; + if ((ret_val = + fill_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + txthread[0]), numThreadsTxNumerical, + sizeof(ucc_geth_thread_tx_pram_t), + UCC_GETH_THREAD_TX_PRAM_ALIGNMENT, + ug_info->riscTx, 0)) != 0) { + ugeth_err("%s: Can not fill p_init_enet_param_shadow.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + + /* Load Rx bds with buffers */ + for (i = 0; i < ug_info->numQueuesRx; i++) { + if ((ret_val = rx_bd_buffer_set(ugeth, (u8) i)) != 0) { + ugeth_err("%s: Can not fill Rx bds with buffers.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + } + + /* Allocate InitEnet command parameter structure */ + init_enet_pram_offset = qe_muram_alloc(sizeof(ucc_geth_init_pram_t), 4); + if (IS_MURAM_ERR(init_enet_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_init_enet_pram.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + p_init_enet_pram = + (ucc_geth_init_pram_t *) qe_muram_addr(init_enet_pram_offset); + + /* Copy shadow InitEnet command parameter structure into PRAM */ + p_init_enet_pram->resinit1 = ugeth->p_init_enet_param_shadow->resinit1; + p_init_enet_pram->resinit2 = ugeth->p_init_enet_param_shadow->resinit2; + p_init_enet_pram->resinit3 = ugeth->p_init_enet_param_shadow->resinit3; + p_init_enet_pram->resinit4 = ugeth->p_init_enet_param_shadow->resinit4; + out_be16(&p_init_enet_pram->resinit5, + ugeth->p_init_enet_param_shadow->resinit5); + p_init_enet_pram->largestexternallookupkeysize = + ugeth->p_init_enet_param_shadow->largestexternallookupkeysize; + out_be32(&p_init_enet_pram->rgftgfrxglobal, + ugeth->p_init_enet_param_shadow->rgftgfrxglobal); + for (i = 0; i < ENET_INIT_PARAM_MAX_ENTRIES_RX; i++) + out_be32(&p_init_enet_pram->rxthread[i], + ugeth->p_init_enet_param_shadow->rxthread[i]); + out_be32(&p_init_enet_pram->txglobal, + ugeth->p_init_enet_param_shadow->txglobal); + for (i = 0; i < ENET_INIT_PARAM_MAX_ENTRIES_TX; i++) + out_be32(&p_init_enet_pram->txthread[i], + ugeth->p_init_enet_param_shadow->txthread[i]); + + /* Issue QE command */ + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, + init_enet_pram_offset); + + /* Free InitEnet command parameter */ + qe_muram_free(init_enet_pram_offset); + + return 0; +} + +/* returns a net_device_stats structure pointer */ +static struct net_device_stats *ucc_geth_get_stats(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + + return &(ugeth->stats); +} + +/* ucc_geth_timeout gets called when a packet has not been + * transmitted after a set amount of time. + * For now, assume that clearing out all the structures, and + * starting over will fix the problem. */ +static void ucc_geth_timeout(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ugeth->stats.tx_errors++; + + ugeth_dump_regs(ugeth); + + if (dev->flags & IFF_UP) { + ucc_geth_stop(ugeth); + ucc_geth_startup(ugeth); + } + + netif_schedule(dev); +} + +/* This is called by the kernel when a frame is ready for transmission. */ +/* It is pointed to by the dev->hard_start_xmit function pointer */ +static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + u8 *bd; /* BD pointer */ + u32 bd_status; + u8 txQ = 0; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irq(&ugeth->lock); + + ugeth->stats.tx_bytes += skb->len; + + /* Start from the next BD that should be filled */ + bd = ugeth->txBd[txQ]; + bd_status = BD_STATUS_AND_LENGTH(bd); + /* Save the skb pointer so we can free it later */ + ugeth->tx_skbuff[txQ][ugeth->skb_curtx[txQ]] = skb; + + /* Update the current skb pointer (wrapping if this was the last) */ + ugeth->skb_curtx[txQ] = + (ugeth->skb_curtx[txQ] + + 1) & TX_RING_MOD_MASK(ugeth->ug_info->bdRingLenTx[txQ]); + + /* set up the buffer descriptor */ + BD_BUFFER_SET(bd, + dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE)); + + //printk(KERN_DEBUG"skb->data is 0x%x\n",skb->data); + + bd_status = (bd_status & T_W) | T_R | T_I | T_L | skb->len; + + BD_STATUS_AND_LENGTH_SET(bd, bd_status); + + dev->trans_start = jiffies; + + /* Move to next BD in the ring */ + if (!(bd_status & T_W)) + ugeth->txBd[txQ] = bd + UCC_GETH_SIZE_OF_BD; + else + ugeth->txBd[txQ] = ugeth->p_tx_bd_ring[txQ]; + + /* If the next BD still needs to be cleaned up, then the bds + are full. We need to tell the kernel to stop sending us stuff. */ + if (bd == ugeth->confBd[txQ]) { + if (!netif_queue_stopped(dev)) + netif_stop_queue(dev); + } + + if (ugeth->p_scheduler) { + ugeth->cpucount[txQ]++; + /* Indicate to QE that there are more Tx bds ready for + transmission */ + /* This is done by writing a running counter of the bd + count to the scheduler PRAM. */ + out_be16(ugeth->p_cpucount[txQ], ugeth->cpucount[txQ]); + } + + spin_unlock_irq(&ugeth->lock); + + return 0; +} + +static int ucc_geth_rx(ucc_geth_private_t *ugeth, u8 rxQ, int rx_work_limit) +{ + struct sk_buff *skb; + u8 *bd; + u16 length, howmany = 0; + u32 bd_status; + u8 *bdBuffer; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + spin_lock(&ugeth->lock); + /* collect received buffers */ + bd = ugeth->rxBd[rxQ]; + + bd_status = BD_STATUS_AND_LENGTH(bd); + + /* while there are received buffers and BD is full (~R_E) */ + while (!((bd_status & (R_E)) || (--rx_work_limit < 0))) { + bdBuffer = (u8 *) BD_BUFFER(bd); + length = (u16) ((bd_status & BD_LENGTH_MASK) - 4); + skb = ugeth->rx_skbuff[rxQ][ugeth->skb_currx[rxQ]]; + + /* determine whether buffer is first, last, first and last + (single buffer frame) or middle (not first and not last) */ + if (!skb || + (!(bd_status & (R_F | R_L))) || + (bd_status & R_ERRORS_FATAL)) { + ugeth_vdbg("%s, %d: ERROR!!! skb - 0x%08x", + __FUNCTION__, __LINE__, (u32) skb); + if (skb) + dev_kfree_skb_any(skb); + + ugeth->rx_skbuff[rxQ][ugeth->skb_currx[rxQ]] = NULL; + ugeth->stats.rx_dropped++; + } else { + ugeth->stats.rx_packets++; + howmany++; + + /* Prep the skb for the packet */ + skb_put(skb, length); + + /* Tell the skb what kind of packet this is */ + skb->protocol = eth_type_trans(skb, ugeth->dev); + + ugeth->stats.rx_bytes += length; + /* Send the packet up the stack */ +#ifdef CONFIG_UGETH_NAPI + netif_receive_skb(skb); +#else + netif_rx(skb); +#endif /* CONFIG_UGETH_NAPI */ + } + + ugeth->dev->last_rx = jiffies; + + skb = get_new_skb(ugeth, bd); + if (!skb) { + ugeth_warn("%s: No Rx Data Buffer", __FUNCTION__); + spin_unlock(&ugeth->lock); + ugeth->stats.rx_dropped++; + break; + } + + ugeth->rx_skbuff[rxQ][ugeth->skb_currx[rxQ]] = skb; + + /* update to point at the next skb */ + ugeth->skb_currx[rxQ] = + (ugeth->skb_currx[rxQ] + + 1) & RX_RING_MOD_MASK(ugeth->ug_info->bdRingLenRx[rxQ]); + + if (bd_status & R_W) + bd = ugeth->p_rx_bd_ring[rxQ]; + else + bd += UCC_GETH_SIZE_OF_BD; + + bd_status = BD_STATUS_AND_LENGTH(bd); + } + + ugeth->rxBd[rxQ] = bd; + spin_unlock(&ugeth->lock); + return howmany; +} + +static int ucc_geth_tx(struct net_device *dev, u8 txQ) +{ + /* Start from the next BD that should be filled */ + ucc_geth_private_t *ugeth = netdev_priv(dev); + u8 *bd; /* BD pointer */ + u32 bd_status; + + bd = ugeth->confBd[txQ]; + bd_status = BD_STATUS_AND_LENGTH(bd); + + /* Normal processing. */ + while ((bd_status & T_R) == 0) { + /* BD contains already transmitted buffer. */ + /* Handle the transmitted buffer and release */ + /* the BD to be used with the current frame */ + + if ((bd = ugeth->txBd[txQ]) && (netif_queue_stopped(dev) == 0)) + break; + + ugeth->stats.tx_packets++; + + /* Free the sk buffer associated with this TxBD */ + dev_kfree_skb_irq(ugeth-> + tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]); + ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]] = NULL; + ugeth->skb_dirtytx[txQ] = + (ugeth->skb_dirtytx[txQ] + + 1) & TX_RING_MOD_MASK(ugeth->ug_info->bdRingLenTx[txQ]); + + /* We freed a buffer, so now we can restart transmission */ + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + + /* Advance the confirmation BD pointer */ + if (!(bd_status & T_W)) + ugeth->confBd[txQ] += UCC_GETH_SIZE_OF_BD; + else + ugeth->confBd[txQ] = ugeth->p_tx_bd_ring[txQ]; + } + return 0; +} + +#ifdef CONFIG_UGETH_NAPI +static int ucc_geth_poll(struct net_device *dev, int *budget) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + int howmany; + int rx_work_limit = *budget; + u8 rxQ = 0; + + if (rx_work_limit > dev->quota) + rx_work_limit = dev->quota; + + howmany = ucc_geth_rx(ugeth, rxQ, rx_work_limit); + + dev->quota -= howmany; + rx_work_limit -= howmany; + *budget -= howmany; + + if (rx_work_limit >= 0) + netif_rx_complete(dev); + + return (rx_work_limit < 0) ? 1 : 0; +} +#endif /* CONFIG_UGETH_NAPI */ + +static irqreturn_t ucc_geth_irq_handler(int irq, void *info, + struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)info; + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_fast_private_t *uccf; + ucc_geth_info_t *ug_info; + register u32 ucce = 0; + register u32 bit_mask = UCCE_RXBF_SINGLE_MASK; + register u32 tx_mask = UCCE_TXBF_SINGLE_MASK; + register u8 i; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + if (!ugeth) + return IRQ_NONE; + + uccf = ugeth->uccf; + ug_info = ugeth->ug_info; + + do { + ucce |= (u32) (in_be32(uccf->p_ucce) & in_be32(uccf->p_uccm)); + + /* clear event bits for next time */ + /* Side effect here is to mask ucce variable + for future processing below. */ + out_be32(uccf->p_ucce, ucce); /* Clear with ones, + but only bits in UCCM */ + + /* We ignore Tx interrupts because Tx confirmation is + done inside Tx routine */ + + for (i = 0; i < ug_info->numQueuesRx; i++) { + if (ucce & bit_mask) + ucc_geth_rx(ugeth, i, + (int)ugeth->ug_info-> + bdRingLenRx[i]); + ucce &= ~bit_mask; + bit_mask <<= 1; + } + + for (i = 0; i < ug_info->numQueuesTx; i++) { + if (ucce & tx_mask) + ucc_geth_tx(dev, i); + ucce &= ~tx_mask; + tx_mask <<= 1; + } + + /* Exceptions */ + if (ucce & UCCE_BSY) { + ugeth_vdbg("Got BUSY irq!!!!"); + ugeth->stats.rx_errors++; + ucce &= ~UCCE_BSY; + } + if (ucce & UCCE_OTHER) { + ugeth_vdbg("Got frame with error (ucce - 0x%08x)!!!!", + ucce); + ugeth->stats.rx_errors++; + ucce &= ~ucce; + } + } + while (ucce); + + return IRQ_HANDLED; +} + +static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)dev_id; + ucc_geth_private_t *ugeth = netdev_priv(dev); + + ugeth_vdbg("%s: IN", __FUNCTION__); + + /* Clear the interrupt */ + mii_clear_phy_interrupt(ugeth->mii_info); + + /* Disable PHY interrupts */ + mii_configure_phy_interrupt(ugeth->mii_info, MII_INTERRUPT_DISABLED); + + /* Schedule the phy change */ + schedule_work(&ugeth->tq); + + return IRQ_HANDLED; +} + +/* Scheduled by the phy_interrupt/timer to handle PHY changes */ +static void ugeth_phy_change(void *data) +{ + struct net_device *dev = (struct net_device *)data; + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_geth_t *ug_regs; + int result = 0; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ug_regs = ugeth->ug_regs; + + /* Delay to give the PHY a chance to change the + * register state */ + msleep(1); + + /* Update the link, speed, duplex */ + result = ugeth->mii_info->phyinfo->read_status(ugeth->mii_info); + + /* Adjust the known status as long as the link + * isn't still coming up */ + if ((0 == result) || (ugeth->mii_info->link == 0)) + adjust_link(dev); + + /* Reenable interrupts, if needed */ + if (ugeth->ug_info->board_flags & FSL_UGETH_BRD_HAS_PHY_INTR) + mii_configure_phy_interrupt(ugeth->mii_info, + MII_INTERRUPT_ENABLED); +} + +/* Called every so often on systems that don't interrupt + * the core for PHY changes */ +static void ugeth_phy_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + ucc_geth_private_t *ugeth = netdev_priv(dev); + + schedule_work(&ugeth->tq); + + mod_timer(&ugeth->phy_info_timer, jiffies + PHY_CHANGE_TIME * HZ); +} + +/* Keep trying aneg for some time + * If, after GFAR_AN_TIMEOUT seconds, it has not + * finished, we switch to forced. + * Either way, once the process has completed, we either + * request the interrupt, or switch the timer over to + * using ugeth_phy_timer to check status */ +static void ugeth_phy_startup_timer(unsigned long data) +{ + struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data; + ucc_geth_private_t *ugeth = netdev_priv(mii_info->dev); + static int secondary = UGETH_AN_TIMEOUT; + int result; + + /* Configure the Auto-negotiation */ + result = mii_info->phyinfo->config_aneg(mii_info); + + /* If autonegotiation failed to start, and + * we haven't timed out, reset the timer, and return */ + if (result && secondary--) { + mod_timer(&ugeth->phy_info_timer, jiffies + HZ); + return; + } else if (result) { + /* Couldn't start autonegotiation. + * Try switching to forced */ + mii_info->autoneg = 0; + result = mii_info->phyinfo->config_aneg(mii_info); + + /* Forcing failed! Give up */ + if (result) { + ugeth_err("%s: Forcing failed!", mii_info->dev->name); + return; + } + } + + /* Kill the timer so it can be restarted */ + del_timer_sync(&ugeth->phy_info_timer); + + /* Grab the PHY interrupt, if necessary/possible */ + if (ugeth->ug_info->board_flags & FSL_UGETH_BRD_HAS_PHY_INTR) { + if (request_irq(ugeth->ug_info->phy_interrupt, + phy_interrupt, + SA_SHIRQ, "phy_interrupt", mii_info->dev) < 0) { + ugeth_err("%s: Can't get IRQ %d (PHY)", + mii_info->dev->name, + ugeth->ug_info->phy_interrupt); + } else { + mii_configure_phy_interrupt(ugeth->mii_info, + MII_INTERRUPT_ENABLED); + return; + } + } + + /* Start the timer again, this time in order to + * handle a change in status */ + init_timer(&ugeth->phy_info_timer); + ugeth->phy_info_timer.function = &ugeth_phy_timer; + ugeth->phy_info_timer.data = (unsigned long)mii_info->dev; + mod_timer(&ugeth->phy_info_timer, jiffies + PHY_CHANGE_TIME * HZ); +} + +/* Called when something needs to use the ethernet device */ +/* Returns 0 for success. */ +static int ucc_geth_open(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + int err; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + /* Test station address */ + if (dev->dev_addr[0] & ENET_GROUP_ADDR) { + ugeth_err("%s: Multicast address used for station address" + " - is this what you wanted?", __FUNCTION__); + return -EINVAL; + } + + err = ucc_geth_startup(ugeth); + if (err) { + ugeth_err("%s: Cannot configure net device, aborting.", + dev->name); + return err; + } + + err = adjust_enet_interface(ugeth); + if (err) { + ugeth_err("%s: Cannot configure net device, aborting.", + dev->name); + return err; + } + + /* Set MACSTNADDR1, MACSTNADDR2 */ + /* For more details see the hardware spec. */ + init_mac_station_addr_regs(dev->dev_addr[0], + dev->dev_addr[1], + dev->dev_addr[2], + dev->dev_addr[3], + dev->dev_addr[4], + dev->dev_addr[5], + &ugeth->ug_regs->macstnaddr1, + &ugeth->ug_regs->macstnaddr2); + + err = init_phy(dev); + if (err) { + ugeth_err("%s: Cannot initialzie PHY, aborting.", dev->name); + return err; + } +#ifndef CONFIG_UGETH_NAPI + err = + request_irq(ugeth->ug_info->uf_info.irq, ucc_geth_irq_handler, 0, + "UCC Geth", dev); + if (err) { + ugeth_err("%s: Cannot get IRQ for net device, aborting.", + dev->name); + ucc_geth_stop(ugeth); + return err; + } +#endif /* CONFIG_UGETH_NAPI */ + + /* Set up the PHY change work queue */ + INIT_WORK(&ugeth->tq, ugeth_phy_change, dev); + + init_timer(&ugeth->phy_info_timer); + ugeth->phy_info_timer.function = &ugeth_phy_startup_timer; + ugeth->phy_info_timer.data = (unsigned long)ugeth->mii_info; + mod_timer(&ugeth->phy_info_timer, jiffies + HZ); + + err = ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); + if (err) { + ugeth_err("%s: Cannot enable net device, aborting.", dev->name); + ucc_geth_stop(ugeth); + return err; + } + + netif_start_queue(dev); + + return err; +} + +/* Stops the kernel queue, and halts the controller */ +static int ucc_geth_close(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ucc_geth_stop(ugeth); + + /* Shutdown the PHY */ + if (ugeth->mii_info->phyinfo->close) + ugeth->mii_info->phyinfo->close(ugeth->mii_info); + + kfree(ugeth->mii_info); + + netif_stop_queue(dev); + + return 0; +} + +struct ethtool_ops ucc_geth_ethtool_ops = { + .get_settings = NULL, + .get_drvinfo = NULL, + .get_regs_len = NULL, + .get_regs = NULL, + .get_link = NULL, + .get_coalesce = NULL, + .set_coalesce = NULL, + .get_ringparam = NULL, + .set_ringparam = NULL, + .get_strings = NULL, + .get_stats_count = NULL, + .get_ethtool_stats = NULL, +}; + +static int ucc_geth_probe(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct ucc_geth_platform_data *ugeth_pdata; + struct net_device *dev = NULL; + struct ucc_geth_private *ugeth = NULL; + struct ucc_geth_info *ug_info; + int err; + static int mii_mng_configured = 0; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ugeth_pdata = (struct ucc_geth_platform_data *)pdev->dev.platform_data; + + ug_info = &ugeth_info[pdev->id]; + ug_info->uf_info.ucc_num = pdev->id; + ug_info->uf_info.rx_clock = ugeth_pdata->rx_clock; + ug_info->uf_info.tx_clock = ugeth_pdata->tx_clock; + ug_info->uf_info.regs = ugeth_pdata->phy_reg_addr; + ug_info->uf_info.irq = platform_get_irq(pdev, 0); + ug_info->phy_address = ugeth_pdata->phy_id; + ug_info->enet_interface = ugeth_pdata->phy_interface; + ug_info->board_flags = ugeth_pdata->board_flags; + ug_info->phy_interrupt = ugeth_pdata->phy_interrupt; + + printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x (irq = %d) \n", + ug_info->uf_info.ucc_num + 1, ug_info->uf_info.regs, + ug_info->uf_info.irq); + + if (ug_info == NULL) { + ugeth_err("%s: [%d] Missing additional data!", __FUNCTION__, + pdev->id); + return -ENODEV; + } + + if (!mii_mng_configured) { + ucc_set_qe_mux_mii_mng(ug_info->uf_info.ucc_num); + mii_mng_configured = 1; + } + + /* Create an ethernet device instance */ + dev = alloc_etherdev(sizeof(*ugeth)); + + if (dev == NULL) + return -ENOMEM; + + ugeth = netdev_priv(dev); + spin_lock_init(&ugeth->lock); + + dev_set_drvdata(device, dev); + + /* Set the dev->base_addr to the gfar reg region */ + dev->base_addr = (unsigned long)(ug_info->uf_info.regs); + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, device); + + /* Fill in the dev structure */ + dev->open = ucc_geth_open; + dev->hard_start_xmit = ucc_geth_start_xmit; + dev->tx_timeout = ucc_geth_timeout; + dev->watchdog_timeo = TX_TIMEOUT; +#ifdef CONFIG_UGETH_NAPI + dev->poll = ucc_geth_poll; + dev->weight = UCC_GETH_DEV_WEIGHT; +#endif /* CONFIG_UGETH_NAPI */ + dev->stop = ucc_geth_close; + dev->get_stats = ucc_geth_get_stats; +// dev->change_mtu = ucc_geth_change_mtu; + dev->mtu = 1500; + dev->set_multicast_list = ucc_geth_set_multi; + dev->ethtool_ops = &ucc_geth_ethtool_ops; + + err = register_netdev(dev); + if (err) { + ugeth_err("%s: Cannot register net device, aborting.", + dev->name); + free_netdev(dev); + return err; + } + + ugeth->ug_info = ug_info; + ugeth->dev = dev; + memcpy(dev->dev_addr, ugeth_pdata->mac_addr, 6); + + return 0; +} + +static int ucc_geth_remove(struct device *device) +{ + struct net_device *dev = dev_get_drvdata(device); + struct ucc_geth_private *ugeth = netdev_priv(dev); + + dev_set_drvdata(device, NULL); + ucc_geth_memclean(ugeth); + free_netdev(dev); + + return 0; +} + +/* Structure for a device driver */ +static struct device_driver ucc_geth_driver = { + .name = DRV_NAME, + .bus = &platform_bus_type, + .probe = ucc_geth_probe, + .remove = ucc_geth_remove, +}; + +static int __init ucc_geth_init(void) +{ + int i; + printk(KERN_INFO "ucc_geth: " DRV_DESC "\n"); + for (i = 0; i < 8; i++) + memcpy(&(ugeth_info[i]), &ugeth_primary_info, + sizeof(ugeth_primary_info)); + + return driver_register(&ucc_geth_driver); +} + +static void __exit ucc_geth_exit(void) +{ + driver_unregister(&ucc_geth_driver); +} + +module_init(ucc_geth_init); +module_exit(ucc_geth_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc"); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h new file mode 100644 index 000000000000..005965f5dd9b --- /dev/null +++ b/drivers/net/ucc_geth.h @@ -0,0 +1,1339 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Shlomi Gridish + * + * Description: + * Internal header file for UCC Gigabit Ethernet unit routines. + * + * Changelog: + * Jun 28, 2006 Li Yang + * - Rearrange code and style fixes + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __UCC_GETH_H__ +#define __UCC_GETH_H__ + +#include +#include +#include + +#include +#include + +#include +#include + +#define NUM_TX_QUEUES 8 +#define NUM_RX_QUEUES 8 +#define NUM_BDS_IN_PREFETCHED_BDS 4 +#define TX_IP_OFFSET_ENTRY_MAX 8 +#define NUM_OF_PADDRS 4 +#define ENET_INIT_PARAM_MAX_ENTRIES_RX 9 +#define ENET_INIT_PARAM_MAX_ENTRIES_TX 8 + +typedef struct ucc_mii_mng { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ +} __attribute__ ((packed)) ucc_mii_mng_t; + +typedef struct ucc_geth { + ucc_fast_t uccf; + + u32 maccfg1; /* mac configuration reg. 1 */ + u32 maccfg2; /* mac configuration reg. 2 */ + u32 ipgifg; /* interframe gap reg. */ + u32 hafdup; /* half-duplex reg. */ + u8 res1[0x10]; + ucc_mii_mng_t miimng; /* MII management structure */ + u32 ifctl; /* interface control reg */ + u32 ifstat; /* interface statux reg */ + u32 macstnaddr1; /* mac station address part 1 reg */ + u32 macstnaddr2; /* mac station address part 2 reg */ + u8 res2[0x8]; + u32 uempr; /* UCC Ethernet Mac parameter reg */ + u32 utbipar; /* UCC tbi address reg */ + u16 uescr; /* UCC Ethernet statistics control reg */ + u8 res3[0x180 - 0x15A]; + u32 tx64; /* Total number of frames (including bad + frames) transmitted that were exactly of the + minimal length (64 for un tagged, 68 for + tagged, or with length exactly equal to the + parameter MINLength */ + u32 tx127; /* Total number of frames (including bad + frames) transmitted that were between + MINLength (Including FCS length==4) and 127 + octets */ + u32 tx255; /* Total number of frames (including bad + frames) transmitted that were between 128 + (Including FCS length==4) and 255 octets */ + u32 rx64; /* Total number of frames received including + bad frames that were exactly of the mninimal + length (64 bytes) */ + u32 rx127; /* Total number of frames (including bad + frames) received that were between MINLength + (Including FCS length==4) and 127 octets */ + u32 rx255; /* Total number of frames (including bad + frames) received that were between 128 + (Including FCS length==4) and 255 octets */ + u32 txok; /* Total number of octets residing in frames + that where involved in succesfull + transmission */ + u16 txcf; /* Total number of PAUSE control frames + transmitted by this MAC */ + u8 res4[0x2]; + u32 tmca; /* Total number of frames that were transmitted + succesfully with the group address bit set + that are not broadcast frames */ + u32 tbca; /* Total number of frames transmitted + succesfully that had destination address + field equal to the broadcast address */ + u32 rxfok; /* Total number of frames received OK */ + u32 rxbok; /* Total number of octets received OK */ + u32 rbyt; /* Total number of octets received including + octets in bad frames. Must be implemented in + HW because it includes octets in frames that + never even reach the UCC */ + u32 rmca; /* Total number of frames that were received + succesfully with the group address bit set + that are not broadcast frames */ + u32 rbca; /* Total number of frames received succesfully + that had destination address equal to the + broadcast address */ + u32 scar; /* Statistics carry register */ + u32 scam; /* Statistics caryy mask register */ + u8 res5[0x200 - 0x1c4]; +} __attribute__ ((packed)) ucc_geth_t; + +/* UCC GETH TEMODR Register */ +#define TEMODER_TX_RMON_STATISTICS_ENABLE 0x0100 /* enable Tx statistics + */ +#define TEMODER_SCHEDULER_ENABLE 0x2000 /* enable scheduler */ +#define TEMODER_IP_CHECKSUM_GENERATE 0x0400 /* generate IPv4 + checksums */ +#define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1 0x0200 /* enable performance + optimization + enhancement (mode1) */ +#define TEMODER_RMON_STATISTICS 0x0100 /* enable tx statistics + */ +#define TEMODER_NUM_OF_QUEUES_SHIFT (15-15) /* Number of queues << + shift */ + +/* UCC GETH TEMODR Register */ +#define REMODER_RX_RMON_STATISTICS_ENABLE 0x00001000 /* enable Rx + statistics */ +#define REMODER_RX_EXTENDED_FEATURES 0x80000000 /* enable + extended + features */ +#define REMODER_VLAN_OPERATION_TAGGED_SHIFT (31-9 ) /* vlan operation + tagged << shift */ +#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT (31-10) /* vlan operation non + tagged << shift */ +#define REMODER_RX_QOS_MODE_SHIFT (31-15) /* rx QoS mode << shift + */ +#define REMODER_RMON_STATISTICS 0x00001000 /* enable rx + statistics */ +#define REMODER_RX_EXTENDED_FILTERING 0x00000800 /* extended + filtering + vs. + mpc82xx-like + filtering */ +#define REMODER_NUM_OF_QUEUES_SHIFT (31-23) /* Number of queues << + shift */ +#define REMODER_DYNAMIC_MAX_FRAME_LENGTH 0x00000008 /* enable + dynamic max + frame length + */ +#define REMODER_DYNAMIC_MIN_FRAME_LENGTH 0x00000004 /* enable + dynamic min + frame length + */ +#define REMODER_IP_CHECKSUM_CHECK 0x00000002 /* check IPv4 + checksums */ +#define REMODER_IP_ADDRESS_ALIGNMENT 0x00000001 /* align ip + address to + 4-byte + boundary */ + +/* UCC GETH Event Register */ +#define UCCE_MPD 0x80000000 /* Magic packet + detection */ +#define UCCE_SCAR 0x40000000 +#define UCCE_GRA 0x20000000 /* Tx graceful + stop + complete */ +#define UCCE_CBPR 0x10000000 +#define UCCE_BSY 0x08000000 +#define UCCE_RXC 0x04000000 +#define UCCE_TXC 0x02000000 +#define UCCE_TXE 0x01000000 +#define UCCE_TXB7 0x00800000 +#define UCCE_TXB6 0x00400000 +#define UCCE_TXB5 0x00200000 +#define UCCE_TXB4 0x00100000 +#define UCCE_TXB3 0x00080000 +#define UCCE_TXB2 0x00040000 +#define UCCE_TXB1 0x00020000 +#define UCCE_TXB0 0x00010000 +#define UCCE_RXB7 0x00008000 +#define UCCE_RXB6 0x00004000 +#define UCCE_RXB5 0x00002000 +#define UCCE_RXB4 0x00001000 +#define UCCE_RXB3 0x00000800 +#define UCCE_RXB2 0x00000400 +#define UCCE_RXB1 0x00000200 +#define UCCE_RXB0 0x00000100 +#define UCCE_RXF7 0x00000080 +#define UCCE_RXF6 0x00000040 +#define UCCE_RXF5 0x00000020 +#define UCCE_RXF4 0x00000010 +#define UCCE_RXF3 0x00000008 +#define UCCE_RXF2 0x00000004 +#define UCCE_RXF1 0x00000002 +#define UCCE_RXF0 0x00000001 + +#define UCCE_RXBF_SINGLE_MASK (UCCE_RXF0) +#define UCCE_TXBF_SINGLE_MASK (UCCE_TXB0) + +#define UCCE_TXB (UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 |\ + UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0) +#define UCCE_RXB (UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 |\ + UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0) +#define UCCE_RXF (UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 |\ + UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0) +#define UCCE_OTHER (UCCE_SCAR | UCCE_GRA | UCCE_CBPR | UCCE_BSY |\ + UCCE_RXC | UCCE_TXC | UCCE_TXE) + +/* UCC GETH UPSMR (Protocol Specific Mode Register) */ +#define UPSMR_ECM 0x04000000 /* Enable CAM + Miss or + Enable + Filtering + Miss */ +#define UPSMR_HSE 0x02000000 /* Hardware + Statistics + Enable */ +#define UPSMR_PRO 0x00400000 /* Promiscuous*/ +#define UPSMR_CAP 0x00200000 /* CAM polarity + */ +#define UPSMR_RSH 0x00100000 /* Receive + Short Frames + */ +#define UPSMR_RPM 0x00080000 /* Reduced Pin + Mode + interfaces */ +#define UPSMR_R10M 0x00040000 /* RGMII/RMII + 10 Mode */ +#define UPSMR_RLPB 0x00020000 /* RMII + Loopback + Mode */ +#define UPSMR_TBIM 0x00010000 /* Ten-bit + Interface + Mode */ +#define UPSMR_RMM 0x00001000 /* RMII/RGMII + Mode */ +#define UPSMR_CAM 0x00000400 /* CAM Address + Matching */ +#define UPSMR_BRO 0x00000200 /* Broadcast + Address */ +#define UPSMR_RES1 0x00002000 /* Reserved + feild - must + be 1 */ + +/* UCC GETH MACCFG1 (MAC Configuration 1 Register) */ +#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control + Rx */ +#define MACCFG1_FLOW_TX 0x00000010 /* Flow Control + Tx */ +#define MACCFG1_ENABLE_SYNCHED_RX 0x00000008 /* Rx Enable + synchronized + to Rx stream + */ +#define MACCFG1_ENABLE_RX 0x00000004 /* Enable Rx */ +#define MACCFG1_ENABLE_SYNCHED_TX 0x00000002 /* Tx Enable + synchronized + to Tx stream + */ +#define MACCFG1_ENABLE_TX 0x00000001 /* Enable Tx */ + +/* UCC GETH MACCFG2 (MAC Configuration 2 Register) */ +#define MACCFG2_PREL_SHIFT (31 - 19) /* Preamble + Length << + shift */ +#define MACCFG2_PREL_MASK 0x0000f000 /* Preamble + Length mask */ +#define MACCFG2_SRP 0x00000080 /* Soft Receive + Preamble */ +#define MACCFG2_STP 0x00000040 /* Soft + Transmit + Preamble */ +#define MACCFG2_RESERVED_1 0x00000020 /* Reserved - + must be set + to 1 */ +#define MACCFG2_LC 0x00000010 /* Length Check + */ +#define MACCFG2_MPE 0x00000008 /* Magic packet + detect */ +#define MACCFG2_FDX 0x00000001 /* Full Duplex */ +#define MACCFG2_FDX_MASK 0x00000001 /* Full Duplex + mask */ +#define MACCFG2_PAD_CRC 0x00000004 +#define MACCFG2_CRC_EN 0x00000002 +#define MACCFG2_PAD_AND_CRC_MODE_NONE 0x00000000 /* Neither + Padding + short frames + nor CRC */ +#define MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY 0x00000002 /* Append CRC + only */ +#define MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC 0x00000004 +#define MACCFG2_INTERFACE_MODE_NIBBLE 0x00000100 /* nibble mode + (MII/RMII/RGMII + 10/100bps) */ +#define MACCFG2_INTERFACE_MODE_BYTE 0x00000200 /* byte mode + (GMII/TBI/RTB/RGMII + 1000bps ) */ +#define MACCFG2_INTERFACE_MODE_MASK 0x00000300 /* mask + covering all + relevant + bits */ + +/* UCC GETH IPGIFG (Inter-frame Gap / Inter-Frame Gap Register) */ +#define IPGIFG_NON_BACK_TO_BACK_IFG_PART1_SHIFT (31 - 7) /* Non + back-to-back + inter frame + gap part 1. + << shift */ +#define IPGIFG_NON_BACK_TO_BACK_IFG_PART2_SHIFT (31 - 15) /* Non + back-to-back + inter frame + gap part 2. + << shift */ +#define IPGIFG_MINIMUM_IFG_ENFORCEMENT_SHIFT (31 - 23) /* Mimimum IFG + Enforcement + << shift */ +#define IPGIFG_BACK_TO_BACK_IFG_SHIFT (31 - 31) /* back-to-back + inter frame + gap << shift + */ +#define IPGIFG_NON_BACK_TO_BACK_IFG_PART1_MAX 127 /* Non back-to-back + inter frame gap part + 1. max val */ +#define IPGIFG_NON_BACK_TO_BACK_IFG_PART2_MAX 127 /* Non back-to-back + inter frame gap part + 2. max val */ +#define IPGIFG_MINIMUM_IFG_ENFORCEMENT_MAX 255 /* Mimimum IFG + Enforcement max val */ +#define IPGIFG_BACK_TO_BACK_IFG_MAX 127 /* back-to-back inter + frame gap max val */ +#define IPGIFG_NBTB_CS_IPG_MASK 0x7F000000 +#define IPGIFG_NBTB_IPG_MASK 0x007F0000 +#define IPGIFG_MIN_IFG_MASK 0x0000FF00 +#define IPGIFG_BTB_IPG_MASK 0x0000007F + +/* UCC GETH HAFDUP (Half Duplex Register) */ +#define HALFDUP_ALT_BEB_TRUNCATION_SHIFT (31 - 11) /* Alternate + Binary + Exponential + Backoff + Truncation + << shift */ +#define HALFDUP_ALT_BEB_TRUNCATION_MAX 0xf /* Alternate Binary + Exponential Backoff + Truncation max val */ +#define HALFDUP_ALT_BEB 0x00080000 /* Alternate + Binary + Exponential + Backoff */ +#define HALFDUP_BACK_PRESSURE_NO_BACKOFF 0x00040000 /* Back + pressure no + backoff */ +#define HALFDUP_NO_BACKOFF 0x00020000 /* No Backoff */ +#define HALFDUP_EXCESSIVE_DEFER 0x00010000 /* Excessive + Defer */ +#define HALFDUP_MAX_RETRANSMISSION_SHIFT (31 - 19) /* Maximum + Retransmission + << shift */ +#define HALFDUP_MAX_RETRANSMISSION_MAX 0xf /* Maximum + Retransmission max + val */ +#define HALFDUP_COLLISION_WINDOW_SHIFT (31 - 31) /* Collision + Window << + shift */ +#define HALFDUP_COLLISION_WINDOW_MAX 0x3f /* Collision Window max + val */ +#define HALFDUP_ALT_BEB_TR_MASK 0x00F00000 +#define HALFDUP_RETRANS_MASK 0x0000F000 +#define HALFDUP_COL_WINDOW_MASK 0x0000003F + +/* UCC GETH UCCS (Ethernet Status Register) */ +#define UCCS_BPR 0x02 /* Back pressure (in + half duplex mode) */ +#define UCCS_PAU 0x02 /* Pause state (in full + duplex mode) */ +#define UCCS_MPD 0x01 /* Magic Packet + Detected */ + +/* UCC GETH MIIMCFG (MII Management Configuration Register) */ +#define MIIMCFG_RESET_MANAGEMENT 0x80000000 /* Reset + management */ +#define MIIMCFG_NO_PREAMBLE 0x00000010 /* Preamble + suppress */ +#define MIIMCFG_CLOCK_DIVIDE_SHIFT (31 - 31) /* clock divide + << shift */ +#define MIIMCFG_CLOCK_DIVIDE_MAX 0xf /* clock divide max val + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_2 0x00000000 /* divide by 2 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4 0x00000001 /* divide by 4 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6 0x00000002 /* divide by 6 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8 0x00000003 /* divide by 8 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 0x00000004 /* divide by 10 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14 0x00000005 /* divide by 14 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_16 0x00000008 /* divide by 16 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20 0x00000006 /* divide by 20 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28 0x00000007 /* divide by 28 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_32 0x00000009 /* divide by 32 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_48 0x0000000a /* divide by 48 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_64 0x0000000b /* divide by 64 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_80 0x0000000c /* divide by 80 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112 0x0000000d /* divide by + 112 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_160 0x0000000e /* divide by + 160 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_224 0x0000000f /* divide by + 224 */ + +/* UCC GETH MIIMCOM (MII Management Command Register) */ +#define MIIMCOM_SCAN_CYCLE 0x00000002 /* Scan cycle */ +#define MIIMCOM_READ_CYCLE 0x00000001 /* Read cycle */ + +/* UCC GETH MIIMADD (MII Management Address Register) */ +#define MIIMADD_PHY_ADDRESS_SHIFT (31 - 23) /* PHY Address + << shift */ +#define MIIMADD_PHY_REGISTER_SHIFT (31 - 31) /* PHY Register + << shift */ + +/* UCC GETH MIIMCON (MII Management Control Register) */ +#define MIIMCON_PHY_CONTROL_SHIFT (31 - 31) /* PHY Control + << shift */ +#define MIIMCON_PHY_STATUS_SHIFT (31 - 31) /* PHY Status + << shift */ + +/* UCC GETH MIIMIND (MII Management Indicator Register) */ +#define MIIMIND_NOT_VALID 0x00000004 /* Not valid */ +#define MIIMIND_SCAN 0x00000002 /* Scan in + progress */ +#define MIIMIND_BUSY 0x00000001 + +/* UCC GETH IFSTAT (Interface Status Register) */ +#define IFSTAT_EXCESS_DEFER 0x00000200 /* Excessive + transmission + defer */ + +/* UCC GETH MACSTNADDR1 (Station Address Part 1 Register) */ +#define MACSTNADDR1_OCTET_6_SHIFT (31 - 7) /* Station + address 6th + octet << + shift */ +#define MACSTNADDR1_OCTET_5_SHIFT (31 - 15) /* Station + address 5th + octet << + shift */ +#define MACSTNADDR1_OCTET_4_SHIFT (31 - 23) /* Station + address 4th + octet << + shift */ +#define MACSTNADDR1_OCTET_3_SHIFT (31 - 31) /* Station + address 3rd + octet << + shift */ + +/* UCC GETH MACSTNADDR2 (Station Address Part 2 Register) */ +#define MACSTNADDR2_OCTET_2_SHIFT (31 - 7) /* Station + address 2nd + octet << + shift */ +#define MACSTNADDR2_OCTET_1_SHIFT (31 - 15) /* Station + address 1st + octet << + shift */ + +/* UCC GETH UEMPR (Ethernet Mac Parameter Register) */ +#define UEMPR_PAUSE_TIME_VALUE_SHIFT (31 - 15) /* Pause time + value << + shift */ +#define UEMPR_EXTENDED_PAUSE_TIME_VALUE_SHIFT (31 - 31) /* Extended + pause time + value << + shift */ + +/* UCC GETH UTBIPAR (Ten Bit Interface Physical Address Register) */ +#define UTBIPAR_PHY_ADDRESS_SHIFT (31 - 31) /* Phy address + << shift */ +#define UTBIPAR_PHY_ADDRESS_MASK 0x0000001f /* Phy address + mask */ + +/* UCC GETH UESCR (Ethernet Statistics Control Register) */ +#define UESCR_AUTOZ 0x8000 /* Automatically zero + addressed + statistical counter + values */ +#define UESCR_CLRCNT 0x4000 /* Clear all statistics + counters */ +#define UESCR_MAXCOV_SHIFT (15 - 7) /* Max + Coalescing + Value << + shift */ +#define UESCR_SCOV_SHIFT (15 - 15) /* Status + Coalescing + Value << + shift */ + +/* UCC GETH UDSR (Data Synchronization Register) */ +#define UDSR_MAGIC 0x067E + +typedef struct ucc_geth_thread_data_tx { + u8 res0[104]; +} __attribute__ ((packed)) ucc_geth_thread_data_tx_t; + +typedef struct ucc_geth_thread_data_rx { + u8 res0[40]; +} __attribute__ ((packed)) ucc_geth_thread_data_rx_t; + +/* Send Queue Queue-Descriptor */ +typedef struct ucc_geth_send_queue_qd { + u32 bd_ring_base; /* pointer to BD ring base address */ + u8 res0[0x8]; + u32 last_bd_completed_address;/* initialize to last entry in BD ring */ + u8 res1[0x30]; +} __attribute__ ((packed)) ucc_geth_send_queue_qd_t; + +typedef struct ucc_geth_send_queue_mem_region { + ucc_geth_send_queue_qd_t sqqd[NUM_TX_QUEUES]; +} __attribute__ ((packed)) ucc_geth_send_queue_mem_region_t; + +typedef struct ucc_geth_thread_tx_pram { + u8 res0[64]; +} __attribute__ ((packed)) ucc_geth_thread_tx_pram_t; + +typedef struct ucc_geth_thread_rx_pram { + u8 res0[128]; +} __attribute__ ((packed)) ucc_geth_thread_rx_pram_t; + +#define THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING 64 +#define THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_8 64 +#define THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_16 96 + +typedef struct ucc_geth_scheduler { + u16 cpucount0; /* CPU packet counter */ + u16 cpucount1; /* CPU packet counter */ + u16 cecount0; /* QE packet counter */ + u16 cecount1; /* QE packet counter */ + u16 cpucount2; /* CPU packet counter */ + u16 cpucount3; /* CPU packet counter */ + u16 cecount2; /* QE packet counter */ + u16 cecount3; /* QE packet counter */ + u16 cpucount4; /* CPU packet counter */ + u16 cpucount5; /* CPU packet counter */ + u16 cecount4; /* QE packet counter */ + u16 cecount5; /* QE packet counter */ + u16 cpucount6; /* CPU packet counter */ + u16 cpucount7; /* CPU packet counter */ + u16 cecount6; /* QE packet counter */ + u16 cecount7; /* QE packet counter */ + u32 weightstatus[NUM_TX_QUEUES]; /* accumulated weight factor */ + u32 rtsrshadow; /* temporary variable handled by QE */ + u32 time; /* temporary variable handled by QE */ + u32 ttl; /* temporary variable handled by QE */ + u32 mblinterval; /* max burst length interval */ + u16 nortsrbytetime; /* normalized value of byte time in tsr units */ + u8 fracsiz; /* radix 2 log value of denom. of + NorTSRByteTime */ + u8 res0[1]; + u8 strictpriorityq; /* Strict Priority Mask register */ + u8 txasap; /* Transmit ASAP register */ + u8 extrabw; /* Extra BandWidth register */ + u8 oldwfqmask; /* temporary variable handled by QE */ + u8 weightfactor[NUM_TX_QUEUES]; + /**< weight factor for queues */ + u32 minw; /* temporary variable handled by QE */ + u8 res1[0x70 - 0x64]; +} __attribute__ ((packed)) ucc_geth_scheduler_t; + +typedef struct ucc_geth_tx_firmware_statistics_pram { + u32 sicoltx; /* single collision */ + u32 mulcoltx; /* multiple collision */ + u32 latecoltxfr; /* late collision */ + u32 frabortduecol; /* frames aborted due to transmit collision */ + u32 frlostinmactxer; /* frames lost due to internal MAC error + transmission that are not counted on any + other counter */ + u32 carriersenseertx; /* carrier sense error */ + u32 frtxok; /* frames transmitted OK */ + u32 txfrexcessivedefer; /* frames with defferal time greater than + specified threshold */ + u32 txpkts256; /* total packets (including bad) between 256 + and 511 octets */ + u32 txpkts512; /* total packets (including bad) between 512 + and 1023 octets */ + u32 txpkts1024; /* total packets (including bad) between 1024 + and 1518 octets */ + u32 txpktsjumbo; /* total packets (including bad) between 1024 + and MAXLength octets */ +} __attribute__ ((packed)) ucc_geth_tx_firmware_statistics_pram_t; + +typedef struct ucc_geth_rx_firmware_statistics_pram { + u32 frrxfcser; /* frames with crc error */ + u32 fraligner; /* frames with alignment error */ + u32 inrangelenrxer; /* in range length error */ + u32 outrangelenrxer; /* out of range length error */ + u32 frtoolong; /* frame too long */ + u32 runt; /* runt */ + u32 verylongevent; /* very long event */ + u32 symbolerror; /* symbol error */ + u32 dropbsy; /* drop because of BD not ready */ + u8 res0[0x8]; + u32 mismatchdrop; /* drop because of MAC filtering (e.g. address + or type mismatch) */ + u32 underpkts; /* total frames less than 64 octets */ + u32 pkts256; /* total frames (including bad) between 256 and + 511 octets */ + u32 pkts512; /* total frames (including bad) between 512 and + 1023 octets */ + u32 pkts1024; /* total frames (including bad) between 1024 + and 1518 octets */ + u32 pktsjumbo; /* total frames (including bad) between 1024 + and MAXLength octets */ + u32 frlossinmacer; /* frames lost because of internal MAC error + that is not counted in any other counter */ + u32 pausefr; /* pause frames */ + u8 res1[0x4]; + u32 removevlan; /* total frames that had their VLAN tag removed + */ + u32 replacevlan; /* total frames that had their VLAN tag + replaced */ + u32 insertvlan; /* total frames that had their VLAN tag + inserted */ +} __attribute__ ((packed)) ucc_geth_rx_firmware_statistics_pram_t; + +typedef struct ucc_geth_rx_interrupt_coalescing_entry { + u32 interruptcoalescingmaxvalue; /* interrupt coalescing max + value */ + u32 interruptcoalescingcounter; /* interrupt coalescing counter, + initialize to + interruptcoalescingmaxvalue */ +} __attribute__ ((packed)) ucc_geth_rx_interrupt_coalescing_entry_t; + +typedef struct ucc_geth_rx_interrupt_coalescing_table { + ucc_geth_rx_interrupt_coalescing_entry_t coalescingentry[NUM_RX_QUEUES]; + /**< interrupt coalescing entry */ +} __attribute__ ((packed)) ucc_geth_rx_interrupt_coalescing_table_t; + +typedef struct ucc_geth_rx_prefetched_bds { + qe_bd_t bd[NUM_BDS_IN_PREFETCHED_BDS]; /* prefetched bd */ +} __attribute__ ((packed)) ucc_geth_rx_prefetched_bds_t; + +typedef struct ucc_geth_rx_bd_queues_entry { + u32 bdbaseptr; /* BD base pointer */ + u32 bdptr; /* BD pointer */ + u32 externalbdbaseptr; /* external BD base pointer */ + u32 externalbdptr; /* external BD pointer */ +} __attribute__ ((packed)) ucc_geth_rx_bd_queues_entry_t; + +typedef struct ucc_geth_tx_global_pram { + u16 temoder; + u8 res0[0x38 - 0x02]; + u32 sqptr; /* a base pointer to send queue memory region */ + u32 schedulerbasepointer; /* a base pointer to scheduler memory + region */ + u32 txrmonbaseptr; /* base pointer to Tx RMON statistics counter */ + u32 tstate; /* tx internal state. High byte contains + function code */ + u8 iphoffset[TX_IP_OFFSET_ENTRY_MAX]; + u32 vtagtable[0x8]; /* 8 4-byte VLAN tags */ + u32 tqptr; /* a base pointer to the Tx Queues Memory + Region */ + u8 res2[0x80 - 0x74]; +} __attribute__ ((packed)) ucc_geth_tx_global_pram_t; + +/* structure representing Extended Filtering Global Parameters in PRAM */ +typedef struct ucc_geth_exf_global_pram { + u32 l2pcdptr; /* individual address filter, high */ + u8 res0[0x10 - 0x04]; +} __attribute__ ((packed)) ucc_geth_exf_global_pram_t; + +typedef struct ucc_geth_rx_global_pram { + u32 remoder; /* ethernet mode reg. */ + u32 rqptr; /* base pointer to the Rx Queues Memory Region*/ + u32 res0[0x1]; + u8 res1[0x20 - 0xC]; + u16 typeorlen; /* cutoff point less than which, type/len field + is considered length */ + u8 res2[0x1]; + u8 rxgstpack; /* acknowledgement on GRACEFUL STOP RX command*/ + u32 rxrmonbaseptr; /* base pointer to Rx RMON statistics counter */ + u8 res3[0x30 - 0x28]; + u32 intcoalescingptr; /* Interrupt coalescing table pointer */ + u8 res4[0x36 - 0x34]; + u8 rstate; /* rx internal state. High byte contains + function code */ + u8 res5[0x46 - 0x37]; + u16 mrblr; /* max receive buffer length reg. */ + u32 rbdqptr; /* base pointer to RxBD parameter table + description */ + u16 mflr; /* max frame length reg. */ + u16 minflr; /* min frame length reg. */ + u16 maxd1; /* max dma1 length reg. */ + u16 maxd2; /* max dma2 length reg. */ + u32 ecamptr; /* external CAM address */ + u32 l2qt; /* VLAN priority mapping table. */ + u32 l3qt[0x8]; /* IP priority mapping table. */ + u16 vlantype; /* vlan type */ + u16 vlantci; /* default vlan tci */ + u8 addressfiltering[64]; /* address filtering data structure */ + u32 exfGlobalParam; /* base address for extended filtering global + parameters */ + u8 res6[0x100 - 0xC4]; /* Initialize to zero */ +} __attribute__ ((packed)) ucc_geth_rx_global_pram_t; + +#define GRACEFUL_STOP_ACKNOWLEDGE_RX 0x01 + +/* structure representing InitEnet command */ +typedef struct ucc_geth_init_pram { + u8 resinit1; + u8 resinit2; + u8 resinit3; + u8 resinit4; + u16 resinit5; + u8 res1[0x1]; + u8 largestexternallookupkeysize; + u32 rgftgfrxglobal; + u32 rxthread[ENET_INIT_PARAM_MAX_ENTRIES_RX]; /* rx threads */ + u8 res2[0x38 - 0x30]; + u32 txglobal; /* tx global */ + u32 txthread[ENET_INIT_PARAM_MAX_ENTRIES_TX]; /* tx threads */ + u8 res3[0x1]; +} __attribute__ ((packed)) ucc_geth_init_pram_t; + +#define ENET_INIT_PARAM_RGF_SHIFT (32 - 4) +#define ENET_INIT_PARAM_TGF_SHIFT (32 - 8) + +#define ENET_INIT_PARAM_RISC_MASK 0x0000003f +#define ENET_INIT_PARAM_PTR_MASK 0x00ffffc0 +#define ENET_INIT_PARAM_SNUM_MASK 0xff000000 +#define ENET_INIT_PARAM_SNUM_SHIFT 24 + +#define ENET_INIT_PARAM_MAGIC_RES_INIT1 0x06 +#define ENET_INIT_PARAM_MAGIC_RES_INIT2 0x30 +#define ENET_INIT_PARAM_MAGIC_RES_INIT3 0xff +#define ENET_INIT_PARAM_MAGIC_RES_INIT4 0x00 +#define ENET_INIT_PARAM_MAGIC_RES_INIT5 0x0400 + +/* structure representing 82xx Address Filtering Enet Address in PRAM */ +typedef struct ucc_geth_82xx_enet_address { + u8 res1[0x2]; + u16 h; /* address (MSB) */ + u16 m; /* address */ + u16 l; /* address (LSB) */ +} __attribute__ ((packed)) ucc_geth_82xx_enet_address_t; + +/* structure representing 82xx Address Filtering PRAM */ +typedef struct ucc_geth_82xx_address_filtering_pram { + u32 iaddr_h; /* individual address filter, high */ + u32 iaddr_l; /* individual address filter, low */ + u32 gaddr_h; /* group address filter, high */ + u32 gaddr_l; /* group address filter, low */ + ucc_geth_82xx_enet_address_t taddr; + ucc_geth_82xx_enet_address_t paddr[NUM_OF_PADDRS]; + u8 res0[0x40 - 0x38]; +} __attribute__ ((packed)) ucc_geth_82xx_address_filtering_pram_t; + +/* GETH Tx firmware statistics structure, used when calling + UCC_GETH_GetStatistics. */ +typedef struct ucc_geth_tx_firmware_statistics { + u32 sicoltx; /* single collision */ + u32 mulcoltx; /* multiple collision */ + u32 latecoltxfr; /* late collision */ + u32 frabortduecol; /* frames aborted due to transmit collision */ + u32 frlostinmactxer; /* frames lost due to internal MAC error + transmission that are not counted on any + other counter */ + u32 carriersenseertx; /* carrier sense error */ + u32 frtxok; /* frames transmitted OK */ + u32 txfrexcessivedefer; /* frames with defferal time greater than + specified threshold */ + u32 txpkts256; /* total packets (including bad) between 256 + and 511 octets */ + u32 txpkts512; /* total packets (including bad) between 512 + and 1023 octets */ + u32 txpkts1024; /* total packets (including bad) between 1024 + and 1518 octets */ + u32 txpktsjumbo; /* total packets (including bad) between 1024 + and MAXLength octets */ +} __attribute__ ((packed)) ucc_geth_tx_firmware_statistics_t; + +/* GETH Rx firmware statistics structure, used when calling + UCC_GETH_GetStatistics. */ +typedef struct ucc_geth_rx_firmware_statistics { + u32 frrxfcser; /* frames with crc error */ + u32 fraligner; /* frames with alignment error */ + u32 inrangelenrxer; /* in range length error */ + u32 outrangelenrxer; /* out of range length error */ + u32 frtoolong; /* frame too long */ + u32 runt; /* runt */ + u32 verylongevent; /* very long event */ + u32 symbolerror; /* symbol error */ + u32 dropbsy; /* drop because of BD not ready */ + u8 res0[0x8]; + u32 mismatchdrop; /* drop because of MAC filtering (e.g. address + or type mismatch) */ + u32 underpkts; /* total frames less than 64 octets */ + u32 pkts256; /* total frames (including bad) between 256 and + 511 octets */ + u32 pkts512; /* total frames (including bad) between 512 and + 1023 octets */ + u32 pkts1024; /* total frames (including bad) between 1024 + and 1518 octets */ + u32 pktsjumbo; /* total frames (including bad) between 1024 + and MAXLength octets */ + u32 frlossinmacer; /* frames lost because of internal MAC error + that is not counted in any other counter */ + u32 pausefr; /* pause frames */ + u8 res1[0x4]; + u32 removevlan; /* total frames that had their VLAN tag removed + */ + u32 replacevlan; /* total frames that had their VLAN tag + replaced */ + u32 insertvlan; /* total frames that had their VLAN tag + inserted */ +} __attribute__ ((packed)) ucc_geth_rx_firmware_statistics_t; + +/* GETH hardware statistics structure, used when calling + UCC_GETH_GetStatistics. */ +typedef struct ucc_geth_hardware_statistics { + u32 tx64; /* Total number of frames (including bad + frames) transmitted that were exactly of the + minimal length (64 for un tagged, 68 for + tagged, or with length exactly equal to the + parameter MINLength */ + u32 tx127; /* Total number of frames (including bad + frames) transmitted that were between + MINLength (Including FCS length==4) and 127 + octets */ + u32 tx255; /* Total number of frames (including bad + frames) transmitted that were between 128 + (Including FCS length==4) and 255 octets */ + u32 rx64; /* Total number of frames received including + bad frames that were exactly of the mninimal + length (64 bytes) */ + u32 rx127; /* Total number of frames (including bad + frames) received that were between MINLength + (Including FCS length==4) and 127 octets */ + u32 rx255; /* Total number of frames (including bad + frames) received that were between 128 + (Including FCS length==4) and 255 octets */ + u32 txok; /* Total number of octets residing in frames + that where involved in succesfull + transmission */ + u16 txcf; /* Total number of PAUSE control frames + transmitted by this MAC */ + u32 tmca; /* Total number of frames that were transmitted + succesfully with the group address bit set + that are not broadcast frames */ + u32 tbca; /* Total number of frames transmitted + succesfully that had destination address + field equal to the broadcast address */ + u32 rxfok; /* Total number of frames received OK */ + u32 rxbok; /* Total number of octets received OK */ + u32 rbyt; /* Total number of octets received including + octets in bad frames. Must be implemented in + HW because it includes octets in frames that + never even reach the UCC */ + u32 rmca; /* Total number of frames that were received + succesfully with the group address bit set + that are not broadcast frames */ + u32 rbca; /* Total number of frames received succesfully + that had destination address equal to the + broadcast address */ +} __attribute__ ((packed)) ucc_geth_hardware_statistics_t; + +/* UCC GETH Tx errors returned via TxConf callback */ +#define TX_ERRORS_DEF 0x0200 +#define TX_ERRORS_EXDEF 0x0100 +#define TX_ERRORS_LC 0x0080 +#define TX_ERRORS_RL 0x0040 +#define TX_ERRORS_RC_MASK 0x003C +#define TX_ERRORS_RC_SHIFT 2 +#define TX_ERRORS_UN 0x0002 +#define TX_ERRORS_CSL 0x0001 + +/* UCC GETH Rx errors returned via RxStore callback */ +#define RX_ERRORS_CMR 0x0200 +#define RX_ERRORS_M 0x0100 +#define RX_ERRORS_BC 0x0080 +#define RX_ERRORS_MC 0x0040 + +/* Transmit BD. These are in addition to values defined in uccf. */ +#define T_VID 0x003c0000 /* insert VLAN id index mask. */ +#define T_DEF (((u32) TX_ERRORS_DEF ) << 16) +#define T_EXDEF (((u32) TX_ERRORS_EXDEF ) << 16) +#define T_LC (((u32) TX_ERRORS_LC ) << 16) +#define T_RL (((u32) TX_ERRORS_RL ) << 16) +#define T_RC_MASK (((u32) TX_ERRORS_RC_MASK ) << 16) +#define T_UN (((u32) TX_ERRORS_UN ) << 16) +#define T_CSL (((u32) TX_ERRORS_CSL ) << 16) +#define T_ERRORS_REPORT (T_DEF | T_EXDEF | T_LC | T_RL | T_RC_MASK \ + | T_UN | T_CSL) /* transmit errors to report */ + +/* Receive BD. These are in addition to values defined in uccf. */ +#define R_LG 0x00200000 /* Frame length violation. */ +#define R_NO 0x00100000 /* Non-octet aligned frame. */ +#define R_SH 0x00080000 /* Short frame. */ +#define R_CR 0x00040000 /* CRC error. */ +#define R_OV 0x00020000 /* Overrun. */ +#define R_IPCH 0x00010000 /* IP checksum check failed. */ +#define R_CMR (((u32) RX_ERRORS_CMR ) << 16) +#define R_M (((u32) RX_ERRORS_M ) << 16) +#define R_BC (((u32) RX_ERRORS_BC ) << 16) +#define R_MC (((u32) RX_ERRORS_MC ) << 16) +#define R_ERRORS_REPORT (R_CMR | R_M | R_BC | R_MC) /* receive errors to + report */ +#define R_ERRORS_FATAL (R_LG | R_NO | R_SH | R_CR | \ + R_OV | R_IPCH) /* receive errors to discard */ + +/* Alignments */ +#define UCC_GETH_RX_GLOBAL_PRAM_ALIGNMENT 256 +#define UCC_GETH_TX_GLOBAL_PRAM_ALIGNMENT 128 +#define UCC_GETH_THREAD_RX_PRAM_ALIGNMENT 128 +#define UCC_GETH_THREAD_TX_PRAM_ALIGNMENT 64 +#define UCC_GETH_THREAD_DATA_ALIGNMENT 256 /* spec gives values + based on num of + threads, but always + using the maximum is + easier */ +#define UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32 +#define UCC_GETH_SCHEDULER_ALIGNMENT 4 /* This is a guess */ +#define UCC_GETH_TX_STATISTICS_ALIGNMENT 4 /* This is a guess */ +#define UCC_GETH_RX_STATISTICS_ALIGNMENT 4 /* This is a guess */ +#define UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT 4 /* This is a + guess */ +#define UCC_GETH_RX_BD_QUEUES_ALIGNMENT 8 /* This is a guess */ +#define UCC_GETH_RX_PREFETCHED_BDS_ALIGNMENT 128 /* This is a guess */ +#define UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4 /* This + is a + guess + */ +#define UCC_GETH_RX_BD_RING_ALIGNMENT 32 +#define UCC_GETH_TX_BD_RING_ALIGNMENT 32 +#define UCC_GETH_MRBLR_ALIGNMENT 128 +#define UCC_GETH_RX_BD_RING_SIZE_ALIGNMENT 4 +#define UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT 32 +#define UCC_GETH_RX_DATA_BUF_ALIGNMENT 64 + +#define UCC_GETH_TAD_EF 0x80 +#define UCC_GETH_TAD_V 0x40 +#define UCC_GETH_TAD_REJ 0x20 +#define UCC_GETH_TAD_VTAG_OP_RIGHT_SHIFT 2 +#define UCC_GETH_TAD_VTAG_OP_SHIFT 6 +#define UCC_GETH_TAD_V_NON_VTAG_OP 0x20 +#define UCC_GETH_TAD_RQOS_SHIFT 0 +#define UCC_GETH_TAD_V_PRIORITY_SHIFT 5 +#define UCC_GETH_TAD_CFI 0x10 + +#define UCC_GETH_VLAN_PRIORITY_MAX 8 +#define UCC_GETH_IP_PRIORITY_MAX 64 +#define UCC_GETH_TX_VTAG_TABLE_ENTRY_MAX 8 +#define UCC_GETH_RX_BD_RING_SIZE_MIN 8 +#define UCC_GETH_TX_BD_RING_SIZE_MIN 2 + +#define UCC_GETH_SIZE_OF_BD QE_SIZEOF_BD + +/* Driver definitions */ +#define TX_BD_RING_LEN 0x10 +#define RX_BD_RING_LEN 0x10 +#define UCC_GETH_DEV_WEIGHT TX_BD_RING_LEN + +#define TX_RING_MOD_MASK(size) (size-1) +#define RX_RING_MOD_MASK(size) (size-1) + +#define ENET_NUM_OCTETS_PER_ADDRESS 6 +#define ENET_GROUP_ADDR 0x01 /* Group address mask + for ethernet + addresses */ + +#define TX_TIMEOUT (1*HZ) +#define SKB_ALLOC_TIMEOUT 100000 +#define PHY_INIT_TIMEOUT 100000 +#define PHY_CHANGE_TIME 2 + +/* Fast Ethernet (10/100 Mbps) */ +#define UCC_GETH_URFS_INIT 512 /* Rx virtual FIFO size + */ +#define UCC_GETH_URFET_INIT 256 /* 1/2 urfs */ +#define UCC_GETH_URFSET_INIT 384 /* 3/4 urfs */ +#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size + */ +#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */ +#define UCC_GETH_UTFTT_INIT 128 +/* Gigabit Ethernet (1000 Mbps) */ +#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual + FIFO size */ +#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */ +#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */ +#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual + FIFO size */ +#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */ +#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */ + +#define UCC_GETH_REMODER_INIT 0 /* bits that must be + set */ +#define UCC_GETH_TEMODER_INIT 0xC000 /* bits that must */ +#define UCC_GETH_UPSMR_INIT (UPSMR_RES1) /* Start value + for this + register */ +#define UCC_GETH_MACCFG1_INIT 0 +#define UCC_GETH_MACCFG2_INIT (MACCFG2_RESERVED_1) +#define UCC_GETH_MIIMCFG_MNGMNT_CLC_DIV_INIT \ + (MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112) + +/* Ethernet speed */ +typedef enum enet_speed { + ENET_SPEED_10BT, /* 10 Base T */ + ENET_SPEED_100BT, /* 100 Base T */ + ENET_SPEED_1000BT /* 1000 Base T */ +} enet_speed_e; + +/* Ethernet Address Type. */ +typedef enum enet_addr_type { + ENET_ADDR_TYPE_INDIVIDUAL, + ENET_ADDR_TYPE_GROUP, + ENET_ADDR_TYPE_BROADCAST +} enet_addr_type_e; + +/* TBI / MII Set Register */ +typedef enum enet_tbi_mii_reg { + ENET_TBI_MII_CR = 0x00, /* Control (CR ) */ + ENET_TBI_MII_SR = 0x01, /* Status (SR ) */ + ENET_TBI_MII_ANA = 0x04, /* AN advertisement (ANA ) */ + ENET_TBI_MII_ANLPBPA = 0x05, /* AN link partner base page ability + (ANLPBPA) */ + ENET_TBI_MII_ANEX = 0x06, /* AN expansion (ANEX ) */ + ENET_TBI_MII_ANNPT = 0x07, /* AN next page transmit (ANNPT ) */ + ENET_TBI_MII_ANLPANP = 0x08, /* AN link partner ability next page + (ANLPANP) */ + ENET_TBI_MII_EXST = 0x0F, /* Extended status (EXST ) */ + ENET_TBI_MII_JD = 0x10, /* Jitter diagnostics (JD ) */ + ENET_TBI_MII_TBICON = 0x11 /* TBI control (TBICON ) */ +} enet_tbi_mii_reg_e; + +/* UCC GETH 82xx Ethernet Address Recognition Location */ +typedef enum ucc_geth_enet_address_recognition_location { + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_STATION_ADDRESS,/* station + address */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_PADDR_FIRST, /* additional + station + address + paddr1 */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_PADDR2, /* additional + station + address + paddr2 */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_PADDR3, /* additional + station + address + paddr3 */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_PADDR_LAST, /* additional + station + address + paddr4 */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_GROUP_HASH, /* group hash */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_INDIVIDUAL_HASH /* individual + hash */ +} ucc_geth_enet_address_recognition_location_e; + +/* UCC GETH vlan operation tagged */ +typedef enum ucc_geth_vlan_operation_tagged { + UCC_GETH_VLAN_OPERATION_TAGGED_NOP = 0x0, /* Tagged - nop */ + UCC_GETH_VLAN_OPERATION_TAGGED_REPLACE_VID_PORTION_OF_Q_TAG + = 0x1, /* Tagged - replace vid portion of q tag */ + UCC_GETH_VLAN_OPERATION_TAGGED_IF_VID0_REPLACE_VID_WITH_DEFAULT_VALUE + = 0x2, /* Tagged - if vid0 replace vid with default value */ + UCC_GETH_VLAN_OPERATION_TAGGED_EXTRACT_Q_TAG_FROM_FRAME + = 0x3 /* Tagged - extract q tag from frame */ +} ucc_geth_vlan_operation_tagged_e; + +/* UCC GETH vlan operation non-tagged */ +typedef enum ucc_geth_vlan_operation_non_tagged { + UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP = 0x0, /* Non tagged - nop */ + UCC_GETH_VLAN_OPERATION_NON_TAGGED_Q_TAG_INSERT = 0x1 /* Non tagged - + q tag insert + */ +} ucc_geth_vlan_operation_non_tagged_e; + +/* UCC GETH Rx Quality of Service Mode */ +typedef enum ucc_geth_qos_mode { + UCC_GETH_QOS_MODE_DEFAULT = 0x0, /* default queue */ + UCC_GETH_QOS_MODE_QUEUE_NUM_FROM_L2_CRITERIA = 0x1, /* queue + determined + by L2 + criteria */ + UCC_GETH_QOS_MODE_QUEUE_NUM_FROM_L3_CRITERIA = 0x2 /* queue + determined + by L3 + criteria */ +} ucc_geth_qos_mode_e; + +/* UCC GETH Statistics Gathering Mode - These are bit flags, 'or' them together + for combined functionality */ +typedef enum ucc_geth_statistics_gathering_mode { + UCC_GETH_STATISTICS_GATHERING_MODE_NONE = 0x00000000, /* No + statistics + gathering */ + UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE = 0x00000001,/* Enable + hardware + statistics + gathering + */ + UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX = 0x00000004,/*Enable + firmware + tx + statistics + gathering + */ + UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX = 0x00000008/* Enable + firmware + rx + statistics + gathering + */ +} ucc_geth_statistics_gathering_mode_e; + +/* UCC GETH Pad and CRC Mode - Note, Padding without CRC is not possible */ +typedef enum ucc_geth_maccfg2_pad_and_crc_mode { + UCC_GETH_PAD_AND_CRC_MODE_NONE + = MACCFG2_PAD_AND_CRC_MODE_NONE, /* Neither Padding + short frames + nor CRC */ + UCC_GETH_PAD_AND_CRC_MODE_CRC_ONLY + = MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY, /* Append + CRC only */ + UCC_GETH_PAD_AND_CRC_MODE_PAD_AND_CRC = + MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC +} ucc_geth_maccfg2_pad_and_crc_mode_e; + +/* UCC GETH upsmr Flow Control Mode */ +typedef enum ucc_geth_flow_control_mode { + UPSMR_AUTOMATIC_FLOW_CONTROL_MODE_NONE = 0x00000000, /* No automatic + flow control + */ + UPSMR_AUTOMATIC_FLOW_CONTROL_MODE_PAUSE_WHEN_EMERGENCY + = 0x00004000 /* Send pause frame when RxFIFO reaches its + emergency threshold */ +} ucc_geth_flow_control_mode_e; + +/* UCC GETH number of threads */ +typedef enum ucc_geth_num_of_threads { + UCC_GETH_NUM_OF_THREADS_1 = 0x1, /* 1 */ + UCC_GETH_NUM_OF_THREADS_2 = 0x2, /* 2 */ + UCC_GETH_NUM_OF_THREADS_4 = 0x0, /* 4 */ + UCC_GETH_NUM_OF_THREADS_6 = 0x3, /* 6 */ + UCC_GETH_NUM_OF_THREADS_8 = 0x4 /* 8 */ +} ucc_geth_num_of_threads_e; + +/* UCC GETH number of station addresses */ +typedef enum ucc_geth_num_of_station_addresses { + UCC_GETH_NUM_OF_STATION_ADDRESSES_1, /* 1 */ + UCC_GETH_NUM_OF_STATION_ADDRESSES_5 /* 5 */ +} ucc_geth_num_of_station_addresses_e; + +typedef u8 enet_addr_t[ENET_NUM_OCTETS_PER_ADDRESS]; + +/* UCC GETH 82xx Ethernet Address Container */ +typedef struct enet_addr_container { + enet_addr_t address; /* ethernet address */ + ucc_geth_enet_address_recognition_location_e location; /* location in + 82xx address + recognition + hardware */ + struct list_head node; +} enet_addr_container_t; + +#define ENET_ADDR_CONT_ENTRY(ptr) list_entry(ptr, enet_addr_container_t, node) + +/* UCC GETH Termination Action Descriptor (TAD) structure. */ +typedef struct ucc_geth_tad_params { + int rx_non_dynamic_extended_features_mode; + int reject_frame; + ucc_geth_vlan_operation_tagged_e vtag_op; + ucc_geth_vlan_operation_non_tagged_e vnontag_op; + ucc_geth_qos_mode_e rqos; + u8 vpri; + u16 vid; +} ucc_geth_tad_params_t; + +/* GETH protocol initialization structure */ +typedef struct ucc_geth_info { + ucc_fast_info_t uf_info; + u8 numQueuesTx; + u8 numQueuesRx; + int ipCheckSumCheck; + int ipCheckSumGenerate; + int rxExtendedFiltering; + u32 extendedFilteringChainPointer; + u16 typeorlen; + int dynamicMaxFrameLength; + int dynamicMinFrameLength; + u8 nonBackToBackIfgPart1; + u8 nonBackToBackIfgPart2; + u8 miminumInterFrameGapEnforcement; + u8 backToBackInterFrameGap; + int ipAddressAlignment; + int lengthCheckRx; + u32 mblinterval; + u16 nortsrbytetime; + u8 fracsiz; + u8 strictpriorityq; + u8 txasap; + u8 extrabw; + int miiPreambleSupress; + u8 altBebTruncation; + int altBeb; + int backPressureNoBackoff; + int noBackoff; + int excessDefer; + u8 maxRetransmission; + u8 collisionWindow; + int pro; + int cap; + int rsh; + int rlpb; + int cam; + int bro; + int ecm; + int receiveFlowControl; + u8 maxGroupAddrInHash; + u8 maxIndAddrInHash; + u8 prel; + u16 maxFrameLength; + u16 minFrameLength; + u16 maxD1Length; + u16 maxD2Length; + u16 vlantype; + u16 vlantci; + u32 ecamptr; + u32 eventRegMask; + u16 pausePeriod; + u16 extensionField; + u8 phy_address; + u32 board_flags; + u32 phy_interrupt; + u8 weightfactor[NUM_TX_QUEUES]; + u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES]; + u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX]; + u8 l3qt[UCC_GETH_IP_PRIORITY_MAX]; + u32 vtagtable[UCC_GETH_TX_VTAG_TABLE_ENTRY_MAX]; + u8 iphoffset[TX_IP_OFFSET_ENTRY_MAX]; + u16 bdRingLenTx[NUM_TX_QUEUES]; + u16 bdRingLenRx[NUM_RX_QUEUES]; + enet_interface_e enet_interface; + ucc_geth_num_of_station_addresses_e numStationAddresses; + qe_fltr_largest_external_tbl_lookup_key_size_e + largestexternallookupkeysize; + ucc_geth_statistics_gathering_mode_e statisticsMode; + ucc_geth_vlan_operation_tagged_e vlanOperationTagged; + ucc_geth_vlan_operation_non_tagged_e vlanOperationNonTagged; + ucc_geth_qos_mode_e rxQoSMode; + ucc_geth_flow_control_mode_e aufc; + ucc_geth_maccfg2_pad_and_crc_mode_e padAndCrc; + ucc_geth_num_of_threads_e numThreadsTx; + ucc_geth_num_of_threads_e numThreadsRx; + qe_risc_allocation_e riscTx; + qe_risc_allocation_e riscRx; +} ucc_geth_info_t; + +/* structure representing UCC GETH */ +typedef struct ucc_geth_private { + ucc_geth_info_t *ug_info; + ucc_fast_private_t *uccf; + struct net_device *dev; + struct net_device_stats stats; /* linux network statistics */ + ucc_geth_t *ug_regs; + ucc_geth_init_pram_t *p_init_enet_param_shadow; + ucc_geth_exf_global_pram_t *p_exf_glbl_param; + u32 exf_glbl_param_offset; + ucc_geth_rx_global_pram_t *p_rx_glbl_pram; + u32 rx_glbl_pram_offset; + ucc_geth_tx_global_pram_t *p_tx_glbl_pram; + u32 tx_glbl_pram_offset; + ucc_geth_send_queue_mem_region_t *p_send_q_mem_reg; + u32 send_q_mem_reg_offset; + ucc_geth_thread_data_tx_t *p_thread_data_tx; + u32 thread_dat_tx_offset; + ucc_geth_thread_data_rx_t *p_thread_data_rx; + u32 thread_dat_rx_offset; + ucc_geth_scheduler_t *p_scheduler; + u32 scheduler_offset; + ucc_geth_tx_firmware_statistics_pram_t *p_tx_fw_statistics_pram; + u32 tx_fw_statistics_pram_offset; + ucc_geth_rx_firmware_statistics_pram_t *p_rx_fw_statistics_pram; + u32 rx_fw_statistics_pram_offset; + ucc_geth_rx_interrupt_coalescing_table_t *p_rx_irq_coalescing_tbl; + u32 rx_irq_coalescing_tbl_offset; + ucc_geth_rx_bd_queues_entry_t *p_rx_bd_qs_tbl; + u32 rx_bd_qs_tbl_offset; + u8 *p_tx_bd_ring[NUM_TX_QUEUES]; + u32 tx_bd_ring_offset[NUM_TX_QUEUES]; + u8 *p_rx_bd_ring[NUM_RX_QUEUES]; + u32 rx_bd_ring_offset[NUM_RX_QUEUES]; + u8 *confBd[NUM_TX_QUEUES]; + u8 *txBd[NUM_TX_QUEUES]; + u8 *rxBd[NUM_RX_QUEUES]; + int badFrame[NUM_RX_QUEUES]; + u16 cpucount[NUM_TX_QUEUES]; + volatile u16 *p_cpucount[NUM_TX_QUEUES]; + int indAddrRegUsed[NUM_OF_PADDRS]; + enet_addr_t paddr[NUM_OF_PADDRS]; + u8 numGroupAddrInHash; + u8 numIndAddrInHash; + u8 numIndAddrInReg; + int rx_extended_features; + int rx_non_dynamic_extended_features; + struct list_head conf_skbs; + struct list_head group_hash_q; + struct list_head ind_hash_q; + u32 saved_uccm; + spinlock_t lock; + /* pointers to arrays of skbuffs for tx and rx */ + struct sk_buff **tx_skbuff[NUM_TX_QUEUES]; + struct sk_buff **rx_skbuff[NUM_RX_QUEUES]; + /* indices pointing to the next free sbk in skb arrays */ + u16 skb_curtx[NUM_TX_QUEUES]; + u16 skb_currx[NUM_RX_QUEUES]; + /* index of the first skb which hasn't been transmitted yet. */ + u16 skb_dirtytx[NUM_TX_QUEUES]; + + struct work_struct tq; + struct timer_list phy_info_timer; + struct ugeth_mii_info *mii_info; + int oldspeed; + int oldduplex; + int oldlink; +} ucc_geth_private_t; + +#endif /* __UCC_GETH_H__ */ diff --git a/drivers/net/ucc_geth_phy.c b/drivers/net/ucc_geth_phy.c new file mode 100644 index 000000000000..f91028c5386d --- /dev/null +++ b/drivers/net/ucc_geth_phy.c @@ -0,0 +1,801 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Shlomi Gridish + * + * Description: + * UCC GETH Driver -- PHY handling + * + * Changelog: + * Jun 28, 2006 Li Yang + * - Rearrange code and style fixes + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "ucc_geth.h" +#include "ucc_geth_phy.h" +#include + +#define ugphy_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define ugphy_dbg(format, arg...) \ + ugphy_printk(KERN_DEBUG, format , ## arg) +#define ugphy_err(format, arg...) \ + ugphy_printk(KERN_ERR, format , ## arg) +#define ugphy_info(format, arg...) \ + ugphy_printk(KERN_INFO, format , ## arg) +#define ugphy_warn(format, arg...) \ + ugphy_printk(KERN_WARNING, format , ## arg) + +#ifdef UGETH_VERBOSE_DEBUG +#define ugphy_vdbg ugphy_dbg +#else +#define ugphy_vdbg(fmt, args...) do { } while (0) +#endif /* UGETH_VERBOSE_DEBUG */ + +static void config_genmii_advert(struct ugeth_mii_info *mii_info); +static void genmii_setup_forced(struct ugeth_mii_info *mii_info); +static void genmii_restart_aneg(struct ugeth_mii_info *mii_info); +static int gbit_config_aneg(struct ugeth_mii_info *mii_info); +static int genmii_config_aneg(struct ugeth_mii_info *mii_info); +static int genmii_update_link(struct ugeth_mii_info *mii_info); +static int genmii_read_status(struct ugeth_mii_info *mii_info); +u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum); +void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val); + +static u8 *bcsr_regs = NULL; + +/* Write value to the PHY for this device to the register at regnum, */ +/* waiting until the write is done before it returns. All PHY */ +/* configuration has to be done through the TSEC1 MIIM regs */ +void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_mii_mng_t *mii_regs; + enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; + u32 tmp_reg; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irq(&ugeth->lock); + + mii_regs = ugeth->mii_info->mii_regs; + + /* Set this UCC to be the master of the MII managment */ + ucc_set_qe_mux_mii_mng(ugeth->ug_info->uf_info.ucc_num); + + /* Stop the MII management read cycle */ + out_be32(&mii_regs->miimcom, 0); + /* Setting up the MII Mangement Address Register */ + tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; + out_be32(&mii_regs->miimadd, tmp_reg); + + /* Setting up the MII Mangement Control Register with the value */ + out_be32(&mii_regs->miimcon, (u32) value); + + /* Wait till MII management write is complete */ + while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY) + cpu_relax(); + + spin_unlock_irq(&ugeth->lock); + + udelay(10000); +} + +/* Reads from register regnum in the PHY for device dev, */ +/* returning the value. Clears miimcom first. All PHY */ +/* configuration has to be done through the TSEC1 MIIM regs */ +int read_phy_reg(struct net_device *dev, int mii_id, int regnum) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_mii_mng_t *mii_regs; + enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; + u32 tmp_reg; + u16 value; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irq(&ugeth->lock); + + mii_regs = ugeth->mii_info->mii_regs; + + /* Setting up the MII Mangement Address Register */ + tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; + out_be32(&mii_regs->miimadd, tmp_reg); + + /* Perform an MII management read cycle */ + out_be32(&mii_regs->miimcom, MIIMCOM_READ_CYCLE); + + /* Wait till MII management write is complete */ + while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY) + cpu_relax(); + + udelay(10000); + + /* Read MII management status */ + value = (u16) in_be32(&mii_regs->miimstat); + out_be32(&mii_regs->miimcom, 0); + if (value == 0xffff) + ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x", + mii_id, mii_reg, (u32) & (mii_regs->miimcfg)); + + spin_unlock_irq(&ugeth->lock); + + return (value); +} + +void mii_clear_phy_interrupt(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->phyinfo->ack_interrupt) + mii_info->phyinfo->ack_interrupt(mii_info); +} + +void mii_configure_phy_interrupt(struct ugeth_mii_info *mii_info, + u32 interrupts) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + mii_info->interrupts = interrupts; + if (mii_info->phyinfo->config_intr) + mii_info->phyinfo->config_intr(mii_info); +} + +/* Writes MII_ADVERTISE with the appropriate values, after + * sanitizing advertise to make sure only supported features + * are advertised + */ +static void config_genmii_advert(struct ugeth_mii_info *mii_info) +{ + u32 advertise; + u16 adv; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Only allow advertising what this PHY supports */ + mii_info->advertising &= mii_info->phyinfo->features; + advertise = mii_info->advertising; + + /* Setup standard advertisement */ + adv = phy_read(mii_info, MII_ADVERTISE); + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + phy_write(mii_info, MII_ADVERTISE, adv); +} + +static void genmii_setup_forced(struct ugeth_mii_info *mii_info) +{ + u16 ctrl; + u32 features = mii_info->phyinfo->features; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + ctrl = phy_read(mii_info, MII_BMCR); + + ctrl &= + ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); + ctrl |= BMCR_RESET; + + switch (mii_info->speed) { + case SPEED_1000: + if (features & (SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full)) { + ctrl |= BMCR_SPEED1000; + break; + } + mii_info->speed = SPEED_100; + case SPEED_100: + if (features & (SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full)) { + ctrl |= BMCR_SPEED100; + break; + } + mii_info->speed = SPEED_10; + case SPEED_10: + if (features & (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full)) + break; + default: /* Unsupported speed! */ + ugphy_err("%s: Bad speed!", mii_info->dev->name); + break; + } + + phy_write(mii_info, MII_BMCR, ctrl); +} + +/* Enable and Restart Autonegotiation */ +static void genmii_restart_aneg(struct ugeth_mii_info *mii_info) +{ + u16 ctl; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + ctl = phy_read(mii_info, MII_BMCR); + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + phy_write(mii_info, MII_BMCR, ctl); +} + +static int gbit_config_aneg(struct ugeth_mii_info *mii_info) +{ + u16 adv; + u32 advertise; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->autoneg) { + /* Configure the ADVERTISE register */ + config_genmii_advert(mii_info); + advertise = mii_info->advertising; + + adv = phy_read(mii_info, MII_1000BASETCONTROL); + adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | + MII_1000BASETCONTROL_HALFDUPLEXCAP); + if (advertise & SUPPORTED_1000baseT_Half) + adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; + if (advertise & SUPPORTED_1000baseT_Full) + adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; + phy_write(mii_info, MII_1000BASETCONTROL, adv); + + /* Start/Restart aneg */ + genmii_restart_aneg(mii_info); + } else + genmii_setup_forced(mii_info); + + return 0; +} + +static int genmii_config_aneg(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->autoneg) { + config_genmii_advert(mii_info); + genmii_restart_aneg(mii_info); + } else + genmii_setup_forced(mii_info); + + return 0; +} + +static int genmii_update_link(struct ugeth_mii_info *mii_info) +{ + u16 status; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Do a fake read */ + phy_read(mii_info, MII_BMSR); + + /* Read link and autonegotiation status */ + status = phy_read(mii_info, MII_BMSR); + if ((status & BMSR_LSTATUS) == 0) + mii_info->link = 0; + else + mii_info->link = 1; + + /* If we are autonegotiating, and not done, + * return an error */ + if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE)) + return -EAGAIN; + + return 0; +} + +static int genmii_read_status(struct ugeth_mii_info *mii_info) +{ + u16 status; + int err; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + if (mii_info->autoneg) { + status = phy_read(mii_info, MII_LPA); + + if (status & (LPA_10FULL | LPA_100FULL)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + if (status & (LPA_100FULL | LPA_100HALF)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + mii_info->pause = 0; + } + /* On non-aneg, we assume what we put in BMCR is the speed, + * though magic-aneg shouldn't prevent this case from occurring + */ + + return 0; +} + +static int marvell_init(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + phy_write(mii_info, 0x14, 0x0cd2); + phy_write(mii_info, MII_BMCR, + phy_read(mii_info, MII_BMCR) | BMCR_RESET); + msleep(4000); + + return 0; +} + +static int marvell_config_aneg(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation */ + phy_write(mii_info, MII_BMCR, BMCR_RESET); + + phy_write(mii_info, 0x1d, 0x1f); + phy_write(mii_info, 0x1e, 0x200c); + phy_write(mii_info, 0x1d, 0x5); + phy_write(mii_info, 0x1e, 0); + phy_write(mii_info, 0x1e, 0x100); + + gbit_config_aneg(mii_info); + + return 0; +} + +static int marvell_read_status(struct ugeth_mii_info *mii_info) +{ + u16 status; + int err; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + int speed; + status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); + + /* Get the duplexity */ + if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + + /* Get the speed */ + speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; + switch (speed) { + case MII_M1011_PHY_SPEC_STATUS_1000: + mii_info->speed = SPEED_1000; + break; + case MII_M1011_PHY_SPEC_STATUS_100: + mii_info->speed = SPEED_100; + break; + default: + mii_info->speed = SPEED_10; + break; + } + mii_info->pause = 0; + } + + return 0; +} + +static int marvell_ack_interrupt(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Clear the interrupts by reading the reg */ + phy_read(mii_info, MII_M1011_IEVENT); + + return 0; +} + +static int marvell_config_intr(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); + else + phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); + + return 0; +} + +static int cis820x_init(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + phy_write(mii_info, MII_CIS8201_AUX_CONSTAT, + MII_CIS8201_AUXCONSTAT_INIT); + phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT); + + return 0; +} + +static int cis820x_read_status(struct ugeth_mii_info *mii_info) +{ + u16 status; + int err; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + int speed; + + status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT); + if (status & MII_CIS8201_AUXCONSTAT_DUPLEX) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + + speed = status & MII_CIS8201_AUXCONSTAT_SPEED; + + switch (speed) { + case MII_CIS8201_AUXCONSTAT_GBIT: + mii_info->speed = SPEED_1000; + break; + case MII_CIS8201_AUXCONSTAT_100: + mii_info->speed = SPEED_100; + break; + default: + mii_info->speed = SPEED_10; + break; + } + } + + return 0; +} + +static int cis820x_ack_interrupt(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + phy_read(mii_info, MII_CIS8201_ISTAT); + + return 0; +} + +static int cis820x_config_intr(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK); + else + phy_write(mii_info, MII_CIS8201_IMASK, 0); + + return 0; +} + +#define DM9161_DELAY 10 + +static int dm9161_read_status(struct ugeth_mii_info *mii_info) +{ + u16 status; + int err; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + status = phy_read(mii_info, MII_DM9161_SCSR); + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + } + + return 0; +} + +static int dm9161_config_aneg(struct ugeth_mii_info *mii_info) +{ + struct dm9161_private *priv = mii_info->priv; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (0 == priv->resetdone) + return -EAGAIN; + + return 0; +} + +static void dm9161_timer(unsigned long data) +{ + struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data; + struct dm9161_private *priv = mii_info->priv; + u16 status = phy_read(mii_info, MII_BMSR); + + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (status & BMSR_ANEGCOMPLETE) { + priv->resetdone = 1; + } else + mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); +} + +static int dm9161_init(struct ugeth_mii_info *mii_info) +{ + struct dm9161_private *priv; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Allocate the private data structure */ + priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL); + + if (NULL == priv) + return -ENOMEM; + + mii_info->priv = priv; + + /* Reset is not done yet */ + priv->resetdone = 0; + + phy_write(mii_info, MII_BMCR, + phy_read(mii_info, MII_BMCR) | BMCR_RESET); + + phy_write(mii_info, MII_BMCR, + phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE); + + config_genmii_advert(mii_info); + /* Start/Restart aneg */ + genmii_config_aneg(mii_info); + + /* Start a timer for DM9161_DELAY seconds to wait + * for the PHY to be ready */ + init_timer(&priv->timer); + priv->timer.function = &dm9161_timer; + priv->timer.data = (unsigned long)mii_info; + mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); + + return 0; +} + +static void dm9161_close(struct ugeth_mii_info *mii_info) +{ + struct dm9161_private *priv = mii_info->priv; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + del_timer_sync(&priv->timer); + kfree(priv); +} + +static int dm9161_ack_interrupt(struct ugeth_mii_info *mii_info) +{ +/* FIXME: This lines are for BUG fixing in the mpc8325. +Remove this from here when it's fixed */ + if (bcsr_regs == NULL) + bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + bcsr_regs[14] |= 0x40; + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Clear the interrupts by reading the reg */ + phy_read(mii_info, MII_DM9161_INTR); + + + return 0; +} + +static int dm9161_config_intr(struct ugeth_mii_info *mii_info) +{ +/* FIXME: This lines are for BUG fixing in the mpc8325. +Remove this from here when it's fixed */ + if (bcsr_regs == NULL) { + bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + bcsr_regs[14] &= ~0x40; + } + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); + else + phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); + + return 0; +} + +/* Cicada 820x */ +static struct phy_info phy_info_cis820x = { + .phy_id = 0x000fc440, + .name = "Cicada Cis8204", + .phy_id_mask = 0x000fffc0, + .features = MII_GBIT_FEATURES, + .init = &cis820x_init, + .config_aneg = &gbit_config_aneg, + .read_status = &cis820x_read_status, + .ack_interrupt = &cis820x_ack_interrupt, + .config_intr = &cis820x_config_intr, +}; + +static struct phy_info phy_info_dm9161 = { + .phy_id = 0x0181b880, + .phy_id_mask = 0x0ffffff0, + .name = "Davicom DM9161E", + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .close = dm9161_close, +}; + +static struct phy_info phy_info_dm9161a = { + .phy_id = 0x0181b8a0, + .phy_id_mask = 0x0ffffff0, + .name = "Davicom DM9161A", + .features = MII_BASIC_FEATURES, + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .ack_interrupt = dm9161_ack_interrupt, + .config_intr = dm9161_config_intr, + .close = dm9161_close, +}; + +static struct phy_info phy_info_marvell = { + .phy_id = 0x01410c00, + .phy_id_mask = 0xffffff00, + .name = "Marvell 88E11x1", + .features = MII_GBIT_FEATURES, + .init = &marvell_init, + .config_aneg = &marvell_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, +}; + +static struct phy_info phy_info_genmii = { + .phy_id = 0x00000000, + .phy_id_mask = 0x00000000, + .name = "Generic MII", + .features = MII_BASIC_FEATURES, + .config_aneg = genmii_config_aneg, + .read_status = genmii_read_status, +}; + +static struct phy_info *phy_info[] = { + &phy_info_cis820x, + &phy_info_marvell, + &phy_info_dm9161, + &phy_info_dm9161a, + &phy_info_genmii, + NULL +}; + +u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum) +{ + u16 retval; + unsigned long flags; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irqsave(&mii_info->mdio_lock, flags); + retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); + spin_unlock_irqrestore(&mii_info->mdio_lock, flags); + + return retval; +} + +void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val) +{ + unsigned long flags; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irqsave(&mii_info->mdio_lock, flags); + mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val); + spin_unlock_irqrestore(&mii_info->mdio_lock, flags); +} + +/* Use the PHY ID registers to determine what type of PHY is attached + * to device dev. return a struct phy_info structure describing that PHY + */ +struct phy_info *get_phy_info(struct ugeth_mii_info *mii_info) +{ + u16 phy_reg; + u32 phy_ID; + int i; + struct phy_info *theInfo = NULL; + struct net_device *dev = mii_info->dev; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Grab the bits from PHYIR1, and put them in the upper half */ + phy_reg = phy_read(mii_info, MII_PHYSID1); + phy_ID = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = phy_read(mii_info, MII_PHYSID2); + phy_ID |= (phy_reg & 0xffff); + + /* loop through all the known PHY types, and find one that */ + /* matches the ID we read from the PHY. */ + for (i = 0; phy_info[i]; i++) + if (phy_info[i]->phy_id == (phy_ID & phy_info[i]->phy_id_mask)){ + theInfo = phy_info[i]; + break; + } + + /* This shouldn't happen, as we have generic PHY support */ + if (theInfo == NULL) { + ugphy_info("%s: PHY id %x is not supported!", dev->name, + phy_ID); + return NULL; + } else { + ugphy_info("%s: PHY is %s (%x)", dev->name, theInfo->name, + phy_ID); + } + + return theInfo; +} diff --git a/drivers/net/ucc_geth_phy.h b/drivers/net/ucc_geth_phy.h new file mode 100644 index 000000000000..2f98b8f1bb0a --- /dev/null +++ b/drivers/net/ucc_geth_phy.h @@ -0,0 +1,217 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Shlomi Gridish + * + * Description: + * UCC GETH Driver -- PHY handling + * + * Changelog: + * Jun 28, 2006 Li Yang + * - Rearrange code and style fixes + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __UCC_GETH_PHY_H__ +#define __UCC_GETH_PHY_H__ + +#define MII_end ((u32)-2) +#define MII_read ((u32)-1) + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +#define UGETH_AN_TIMEOUT 2000 + +/* 1000BT control (Marvell & BCM54xx at least) */ +#define MII_1000BASETCONTROL 0x09 +#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 +#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 + +/* Cicada Extended Control Register 1 */ +#define MII_CIS8201_EXT_CON1 0x17 +#define MII_CIS8201_EXTCON1_INIT 0x0000 + +/* Cicada Interrupt Mask Register */ +#define MII_CIS8201_IMASK 0x19 +#define MII_CIS8201_IMASK_IEN 0x8000 +#define MII_CIS8201_IMASK_SPEED 0x4000 +#define MII_CIS8201_IMASK_LINK 0x2000 +#define MII_CIS8201_IMASK_DUPLEX 0x1000 +#define MII_CIS8201_IMASK_MASK 0xf000 + +/* Cicada Interrupt Status Register */ +#define MII_CIS8201_ISTAT 0x1a +#define MII_CIS8201_ISTAT_STATUS 0x8000 +#define MII_CIS8201_ISTAT_SPEED 0x4000 +#define MII_CIS8201_ISTAT_LINK 0x2000 +#define MII_CIS8201_ISTAT_DUPLEX 0x1000 + +/* Cicada Auxiliary Control/Status Register */ +#define MII_CIS8201_AUX_CONSTAT 0x1c +#define MII_CIS8201_AUXCONSTAT_INIT 0x0004 +#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 +#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 +#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010 +#define MII_CIS8201_AUXCONSTAT_100 0x0008 + +/* 88E1011 PHY Status Register */ +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 + +#define MII_M1011_IEVENT 0x13 +#define MII_M1011_IEVENT_CLEAR 0x0000 + +#define MII_M1011_IMASK 0x12 +#define MII_M1011_IMASK_INIT 0x6400 +#define MII_M1011_IMASK_CLEAR 0x0000 + +#define MII_DM9161_SCR 0x10 +#define MII_DM9161_SCR_INIT 0x0610 + +/* DM9161 Specified Configuration and Status Register */ +#define MII_DM9161_SCSR 0x11 +#define MII_DM9161_SCSR_100F 0x8000 +#define MII_DM9161_SCSR_100H 0x4000 +#define MII_DM9161_SCSR_10F 0x2000 +#define MII_DM9161_SCSR_10H 0x1000 + +/* DM9161 Interrupt Register */ +#define MII_DM9161_INTR 0x15 +#define MII_DM9161_INTR_PEND 0x8000 +#define MII_DM9161_INTR_DPLX_MASK 0x0800 +#define MII_DM9161_INTR_SPD_MASK 0x0400 +#define MII_DM9161_INTR_LINK_MASK 0x0200 +#define MII_DM9161_INTR_MASK 0x0100 +#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 +#define MII_DM9161_INTR_SPD_CHANGE 0x0008 +#define MII_DM9161_INTR_LINK_CHANGE 0x0004 +#define MII_DM9161_INTR_INIT 0x0000 +#define MII_DM9161_INTR_STOP \ +(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ + | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) + +/* DM9161 10BT Configuration/Status */ +#define MII_DM9161_10BTCSR 0x12 +#define MII_DM9161_10BTCSR_INIT 0x7800 + +#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) + +#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) + +#define MII_READ_COMMAND 0x00000001 + +#define MII_INTERRUPT_DISABLED 0x0 +#define MII_INTERRUPT_ENABLED 0x1 +/* Taken from mii_if_info and sungem_phy.h */ +struct ugeth_mii_info { + /* Information about the PHY type */ + /* And management functions */ + struct phy_info *phyinfo; + + ucc_mii_mng_t *mii_regs; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + + /* The most recently read link state */ + int link; + + /* Enabled Interrupts */ + u32 interrupts; + + u32 advertising; + int autoneg; + int mii_id; + + /* private data pointer */ + /* For use by PHYs to maintain extra state */ + void *priv; + + /* Provided by host chip */ + struct net_device *dev; + + /* A lock to ensure that only one thing can read/write + * the MDIO bus at a time */ + spinlock_t mdio_lock; + + /* Provided by ethernet driver */ + int (*mdio_read) (struct net_device * dev, int mii_id, int reg); + void (*mdio_write) (struct net_device * dev, int mii_id, int reg, + int val); +}; + +/* struct phy_info: a structure which defines attributes for a PHY + * + * id will contain a number which represents the PHY. During + * startup, the driver will poll the PHY to find out what its + * UID--as defined by registers 2 and 3--is. The 32-bit result + * gotten from the PHY will be ANDed with phy_id_mask to + * discard any bits which may change based on revision numbers + * unimportant to functionality + * + * There are 6 commands which take a ugeth_mii_info structure. + * Each PHY must declare config_aneg, and read_status. + */ +struct phy_info { + u32 phy_id; + char *name; + unsigned int phy_id_mask; + u32 features; + + /* Called to initialize the PHY */ + int (*init) (struct ugeth_mii_info * mii_info); + + /* Called to suspend the PHY for power */ + int (*suspend) (struct ugeth_mii_info * mii_info); + + /* Reconfigures autonegotiation (or disables it) */ + int (*config_aneg) (struct ugeth_mii_info * mii_info); + + /* Determines the negotiated speed and duplex */ + int (*read_status) (struct ugeth_mii_info * mii_info); + + /* Clears any pending interrupts */ + int (*ack_interrupt) (struct ugeth_mii_info * mii_info); + + /* Enables or disables interrupts */ + int (*config_intr) (struct ugeth_mii_info * mii_info); + + /* Clears up any memory if needed */ + void (*close) (struct ugeth_mii_info * mii_info); +}; + +struct phy_info *get_phy_info(struct ugeth_mii_info *mii_info); +void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value); +int read_phy_reg(struct net_device *dev, int mii_id, int regnum); +void mii_clear_phy_interrupt(struct ugeth_mii_info *mii_info); +void mii_configure_phy_interrupt(struct ugeth_mii_info *mii_info, + u32 interrupts); + +struct dm9161_private { + struct timer_list timer; + int resetdone; +}; + +#endif /* __UCC_GETH_PHY_H__ */ -- cgit v1.2.2 From 6fd7587bc284af61f92e547287aa5cd616a9c7ba Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 14 Aug 2006 23:00:13 -0700 Subject: [PATCH] Update smc91x driver with ARM Versatile board info We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 () Signed-off-by: Deepak Saxena Cc: Jeff Garzik Cc: Russell King Cc: Nicolas Pitre Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 9f9f8f2d5338..95ac2ddca433 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -367,6 +367,24 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_IRQ_FLAGS (0) +#elif defined(CONFIG_ARCH_VERSATILE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +#define SMC_IRQ_FLAGS (0) + #else #define SMC_CAN_USE_8BIT 1 -- cgit v1.2.2 From 330ce0de93fd7cc0f72fa57a7ec892befe7035d2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:14 -0700 Subject: [PATCH] s2io build fix sparc32: drivers/net/s2io.c:2636: warning: implicit declaration of function 'disable_irq' drivers/net/s2io.c:2656: warning: implicit declaration of function 'enable_irq' Cc: Ananda Raju Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 132ed32bce1a..e72e0e099060 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -71,6 +71,7 @@ #include #include #include +#include /* local include */ #include "s2io.h" -- cgit v1.2.2 From 2fd0e33f4f967022ef2f3249b6c512b309734384 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Mon, 14 Aug 2006 23:00:15 -0700 Subject: [PATCH] net: Add netconsole support to dm9000 driver Add netconsole support to dm9000 driver. Cc: Jeff Garzik Cc: Sascha Hauer Cc: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/dm9000.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 1b758b707134..3d76fa144c4f 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -339,6 +339,17 @@ static void dm9000_timeout(struct net_device *dev) spin_unlock_irqrestore(&db->lock,flags); } +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + *Used by netconsole + */ +static void dm9000_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + dm9000_interrupt(dev->irq,dev,NULL); + enable_irq(dev->irq); +} +#endif /* dm9000_release_board * @@ -538,6 +549,9 @@ dm9000_probe(struct platform_device *pdev) ndev->stop = &dm9000_stop; ndev->get_stats = &dm9000_get_stats; ndev->set_multicast_list = &dm9000_hash_table; +#ifdef CONFIG_NET_POLL_CONTROLLER + ndev->poll_controller = &dm9000_poll_controller; +#endif #ifdef DM9000_PROGRAM_EEPROM program_eeprom(db); -- cgit v1.2.2 From a4d09272480e57cd4aa1156cac7aba9b08885bf9 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 14 Aug 2006 23:00:17 -0700 Subject: [PATCH] smc911x: Re-release spinlock on spurious interrupt The smc911x driver forgets to release the spinlock on spurious interrupts. This little patch fixes it. Cc: Jeff Garzik Signed-off-by: Peter Korsgaard Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index d37bd860b336..0b15290df278 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1092,6 +1092,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs /* Spurious interrupt check */ if ((SMC_GET_IRQ_CFG() & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) != (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) { + spin_unlock_irqrestore(&lp->lock, flags); return IRQ_NONE; } -- cgit v1.2.2 From 633949a145df19d6d338b0f227f033a0a1c5562a Mon Sep 17 00:00:00 2001 From: Roger Luethi Date: Mon, 14 Aug 2006 23:00:17 -0700 Subject: [PATCH] via-rhine: NAPI support Add NAPI support to the via-rhine driver so that it can handle higher speeds and doesn't get overloaded by interrupts as easily. Signed-off-by: Stephen Hemminger Signed-off-by: Roger Luethi Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 14 +++++++++ drivers/net/via-rhine.c | 77 +++++++++++++++++++++++++++++++++++++++++-------- 2 files changed, 79 insertions(+), 12 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ea1796e767b7..30b3671d833d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1724,6 +1724,20 @@ config VIA_RHINE_MMIO If unsure, say Y. +config VIA_RHINE_NAPI + bool "Use Rx Polling (NAPI)" + depends on VIA_RHINE + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See for more + information. + config LAN_SAA9730 bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)" depends on NET_PCI && EXPERIMENTAL && MIPS diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index d3d0ec970318..fee824002d10 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -30,8 +30,8 @@ */ #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.4.0" -#define DRV_RELDATE "June-27-2006" +#define DRV_VERSION "1.4.1" +#define DRV_RELDATE "July-24-2006" /* A few user-configurable values. @@ -63,7 +63,11 @@ static const int multicast_filter_limit = 32; There are no ill effects from too-large receive rings. */ #define TX_RING_SIZE 16 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#ifdef CONFIG_VIA_RHINE_NAPI +#define RX_RING_SIZE 64 +#else #define RX_RING_SIZE 16 +#endif /* Operational parameters that usually are not changed. */ @@ -396,7 +400,7 @@ static void rhine_tx_timeout(struct net_device *dev); static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev); static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static void rhine_tx(struct net_device *dev); -static void rhine_rx(struct net_device *dev); +static int rhine_rx(struct net_device *dev, int limit); static void rhine_error(struct net_device *dev, int intr_status); static void rhine_set_rx_mode(struct net_device *dev); static struct net_device_stats *rhine_get_stats(struct net_device *dev); @@ -564,6 +568,32 @@ static void rhine_poll(struct net_device *dev) } #endif +#ifdef CONFIG_VIA_RHINE_NAPI +static int rhine_napipoll(struct net_device *dev, int *budget) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + int done, limit = min(dev->quota, *budget); + + done = rhine_rx(dev, limit); + *budget -= done; + dev->quota -= done; + + if (done < limit) { + netif_rx_complete(dev); + + iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | + IntrRxDropped | IntrRxNoBuf | IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + return 0; + } + else + return 1; +} +#endif + static void rhine_hw_init(struct net_device *dev, long pioaddr) { struct rhine_private *rp = netdev_priv(dev); @@ -743,6 +773,10 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, dev->watchdog_timeo = TX_TIMEOUT; #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = rhine_poll; +#endif +#ifdef CONFIG_VIA_RHINE_NAPI + dev->poll = rhine_napipoll; + dev->weight = 64; #endif if (rp->quirks & rqRhineI) dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; @@ -1165,6 +1199,7 @@ static void rhine_tx_timeout(struct net_device *dev) dev->trans_start = jiffies; rp->stats.tx_errors++; netif_wake_queue(dev); + netif_poll_enable(dev); } static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) @@ -1268,8 +1303,18 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs * dev->name, intr_status); if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | - IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) - rhine_rx(dev); + IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) { +#ifdef CONFIG_VIA_RHINE_NAPI + iowrite16(IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + + netif_rx_schedule(dev); +#else + rhine_rx(dev, RX_RING_SIZE); +#endif + } if (intr_status & (IntrTxErrSummary | IntrTxDone)) { if (intr_status & IntrTxErrSummary) { @@ -1367,13 +1412,12 @@ static void rhine_tx(struct net_device *dev) spin_unlock(&rp->lock); } -/* This routine is logically part of the interrupt handler, but isolated - for clarity and better register allocation. */ -static void rhine_rx(struct net_device *dev) +/* Process up to limit frames from receive ring */ +static int rhine_rx(struct net_device *dev, int limit) { struct rhine_private *rp = netdev_priv(dev); + int count; int entry = rp->cur_rx % RX_RING_SIZE; - int boguscnt = rp->dirty_rx + RX_RING_SIZE - rp->cur_rx; if (debug > 4) { printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n", @@ -1382,16 +1426,18 @@ static void rhine_rx(struct net_device *dev) } /* If EOP is set on the next entry, it's a new packet. Send it up. */ - while (!(rp->rx_head_desc->rx_status & cpu_to_le32(DescOwn))) { + for (count = 0; count < limit; ++count) { struct rx_desc *desc = rp->rx_head_desc; u32 desc_status = le32_to_cpu(desc->rx_status); int data_size = desc_status >> 16; + if (desc_status & DescOwn) + break; + if (debug > 4) printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n", desc_status); - if (--boguscnt < 0) - break; + if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { if ((desc_status & RxWholePkt) != RxWholePkt) { printk(KERN_WARNING "%s: Oversized Ethernet " @@ -1460,7 +1506,11 @@ static void rhine_rx(struct net_device *dev) PCI_DMA_FROMDEVICE); } skb->protocol = eth_type_trans(skb, dev); +#ifdef CONFIG_VIA_RHINE_NAPI + netif_receive_skb(skb); +#else netif_rx(skb); +#endif dev->last_rx = jiffies; rp->stats.rx_bytes += pkt_len; rp->stats.rx_packets++; @@ -1487,6 +1537,8 @@ static void rhine_rx(struct net_device *dev) } rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); } + + return count; } /* @@ -1776,6 +1828,7 @@ static int rhine_close(struct net_device *dev) spin_lock_irq(&rp->lock); netif_stop_queue(dev); + netif_poll_disable(dev); if (debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard, " -- cgit v1.2.2 From ab1976682f31661a898b92593bccfeae14d0a0ae Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 14 Aug 2006 23:00:18 -0700 Subject: [PATCH] via-rhine: NAPI poll enable The poll_enable should be in init_registers before enabling interrupts, not in tx_timeout. Thanks for spotting it Roger. Signed-off-by: Stephen Hemminger Cc: Roger Luethi Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index fee824002d10..fda367b92a28 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -1048,6 +1048,8 @@ static void init_registers(struct net_device *dev) rhine_set_rx_mode(dev); + netif_poll_enable(dev); + /* Enable interrupts by setting the interrupt mask. */ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | IntrRxDropped | IntrRxNoBuf | IntrTxAborted | @@ -1199,7 +1201,6 @@ static void rhine_tx_timeout(struct net_device *dev) dev->trans_start = jiffies; rp->stats.tx_errors++; netif_wake_queue(dev); - netif_poll_enable(dev); } static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) -- cgit v1.2.2 From 76cb4fe7c0926c2c59f4a36ab169aa2d547c93d1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 14 Aug 2006 23:00:20 -0700 Subject: [PATCH] lockdep: fix smc91x When booting using root-nfs, I'm seeing (independently) two lockdep dumps in the smc91x driver. The patch below fixes both. Both dumps look like real locking issues. Nico - please review and ack if you think the patch is correct. Dump 1: Sending DHCP requests . ================================= [ INFO: inconsistent lock state ] Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 3d8dcb6c8758..cf62373b808b 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -321,12 +321,12 @@ static void smc_reset(struct net_device *dev) DBG(2, "%s: %s\n", dev->name, __FUNCTION__); /* Disable all interrupts, block TX tasklet */ - spin_lock(&lp->lock); + spin_lock_irq(&lp->lock); SMC_SELECT_BANK(2); SMC_SET_INT_MASK(0); pending_skb = lp->pending_tx_skb; lp->pending_tx_skb = NULL; - spin_unlock(&lp->lock); + spin_unlock_irq(&lp->lock); /* free any pending tx skb */ if (pending_skb) { @@ -448,12 +448,12 @@ static void smc_shutdown(struct net_device *dev) DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__); /* no more interrupts for me */ - spin_lock(&lp->lock); + spin_lock_irq(&lp->lock); SMC_SELECT_BANK(2); SMC_SET_INT_MASK(0); pending_skb = lp->pending_tx_skb; lp->pending_tx_skb = NULL; - spin_unlock(&lp->lock); + spin_unlock_irq(&lp->lock); if (pending_skb) dev_kfree_skb(pending_skb); -- cgit v1.2.2 From b933b4d93888b584eda826bffa68a3a1283f8411 Mon Sep 17 00:00:00 2001 From: Roger Luethi Date: Mon, 14 Aug 2006 23:00:21 -0700 Subject: [PATCH] via-rhine: add option avoid_D3 (work around broken BIOSes) It looks like broken BIOSes controlling Rhine chips will remain in use in significant numbers; such systems fail to come up via PXE after they have been put into D3 (power-saving) mode. This patch adds a module option for disabling the call that puts the chip to sleep. Signed-off-by: Roger Luethi Cc: Jeff Garzik Cc: Joerg Bashir Cc: Tim Phipps Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index fda367b92a28..ae971080e2e4 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -44,6 +44,10 @@ static int max_interrupt_work = 20; Setting to > 1518 effectively disables this feature. */ static int rx_copybreak; +/* Work-around for broken BIOSes: they are unable to get the chip back out of + power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ +static int avoid_D3; + /* * In case you are looking for 'options[]' or 'full_duplex[]', they * are gone. Use ethtool(8) instead. @@ -120,9 +124,11 @@ MODULE_LICENSE("GPL"); module_param(max_interrupt_work, int, 0); module_param(debug, int, 0); module_param(rx_copybreak, int, 0); +module_param(avoid_D3, bool, 0); MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); /* Theory of Operation @@ -823,6 +829,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, } } rp->mii_if.phy_id = phy_id; + if (debug > 1 && avoid_D3) + printk(KERN_INFO "%s: No D3 power state at shutdown.\n", + dev->name); return 0; @@ -1911,7 +1920,8 @@ static void rhine_shutdown (struct pci_dev *pdev) } /* Hit power state D3 (sleep) */ - iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); + if (!avoid_D3) + iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); /* TODO: Check use of pci_enable_wake() */ -- cgit v1.2.2 From 7e29f8bf39de372e3903a0b12f34285d30a8a244 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 Aug 2006 23:00:22 -0700 Subject: [PATCH] build fixes: smc91x Unclear how these bugs arrived, presumably from incorrect cleanup of the 16-bit-only paths, but smc91x wouldn't build for OMAP. Signed-off-by: David Brownell Cc: Nicolas Pitre Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 95ac2ddca433..7aa7fbac8224 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -184,16 +184,10 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_IO_SHIFT 0 #define SMC_NOWAIT 1 -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_inw(a, r) readw((a) + (r)) #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) #include #include -- cgit v1.2.2 From b68a60e598c0d1e738c807c47cb181e8cc52a0d8 Mon Sep 17 00:00:00 2001 From: Jim Lewis Date: Mon, 14 Aug 2006 23:00:23 -0700 Subject: [PATCH] Add ethtool -g support to Spidernet network driver Add ethtool -g (show ring sizes) support to the Spidernet network driver. Signed-off-by: James K Lewis Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/spider_net.c | 12 +++++++----- drivers/net/spider_net.h | 3 +++ drivers/net/spider_net_ethtool.c | 13 +++++++++++++ 3 files changed, 23 insertions(+), 5 deletions(-) diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 647f62e9707d..88907218457a 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1611,13 +1611,12 @@ spider_net_open(struct net_device *netdev) int result; result = -ENOMEM; - if (spider_net_init_chain(card, &card->tx_chain, - card->descr, - PCI_DMA_TODEVICE, tx_descriptors)) + if (spider_net_init_chain(card, &card->tx_chain, card->descr, + PCI_DMA_TODEVICE, card->tx_desc)) goto alloc_tx_failed; if (spider_net_init_chain(card, &card->rx_chain, - card->descr + tx_descriptors, - PCI_DMA_FROMDEVICE, rx_descriptors)) + card->descr + card->rx_desc, + PCI_DMA_FROMDEVICE, card->rx_desc)) goto alloc_rx_failed; /* allocate rx skbs */ @@ -2005,6 +2004,9 @@ spider_net_setup_netdev(struct spider_net_card *card) card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT; + card->tx_desc = tx_descriptors; + card->rx_desc = rx_descriptors; + spider_net_setup_netdev_ops(netdev); netdev->features = NETIF_F_HW_CSUM | NETIF_F_LLTX; diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h index f6dcf180ae3d..30407cdf0892 100644 --- a/drivers/net/spider_net.h +++ b/drivers/net/spider_net.h @@ -440,6 +440,9 @@ struct spider_net_card { /* for ethtool */ int msg_enable; + int rx_desc; + int tx_desc; + struct spider_net_descr descr[0]; }; diff --git a/drivers/net/spider_net_ethtool.c b/drivers/net/spider_net_ethtool.c index a5bb0b7633af..02209222b8c9 100644 --- a/drivers/net/spider_net_ethtool.c +++ b/drivers/net/spider_net_ethtool.c @@ -130,6 +130,18 @@ spider_net_ethtool_set_tx_csum(struct net_device *netdev, uint32_t data) return 0; } +static void +spider_net_ethtool_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ering) +{ + struct spider_net_card *card = netdev->priv; + + ering->tx_max_pending = SPIDER_NET_TX_DESCRIPTORS_MAX; + ering->tx_pending = card->tx_desc; + ering->rx_max_pending = SPIDER_NET_RX_DESCRIPTORS_MAX; + ering->rx_pending = card->rx_desc; +} + struct ethtool_ops spider_net_ethtool_ops = { .get_settings = spider_net_ethtool_get_settings, .get_drvinfo = spider_net_ethtool_get_drvinfo, @@ -141,5 +153,6 @@ struct ethtool_ops spider_net_ethtool_ops = { .set_rx_csum = spider_net_ethtool_set_rx_csum, .get_tx_csum = spider_net_ethtool_get_tx_csum, .set_tx_csum = spider_net_ethtool_set_tx_csum, + .get_ringparam = spider_net_ethtool_get_ringparam, }; -- cgit v1.2.2 From 239e44e1f05e2163ee066c07a753f9fb445979b2 Mon Sep 17 00:00:00 2001 From: "Edgar E. Iglesias" Date: Mon, 14 Aug 2006 23:00:24 -0700 Subject: [PATCH] skge: remember to run netif_poll_disable() Signed-off-by: Edgar E. Iglesias Cc: Stephen Hemminger Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 7de9a07b2ac2..ad878dfddef4 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2211,6 +2211,7 @@ static int skge_up(struct net_device *dev) skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F); skge_led(skge, LED_MODE_ON); + netif_poll_enable(dev); return 0; free_rx_ring: @@ -2279,6 +2280,7 @@ static int skge_down(struct net_device *dev) skge_led(skge, LED_MODE_OFF); + netif_poll_disable(dev); skge_tx_clean(skge); skge_rx_clean(skge); -- cgit v1.2.2 From 3d8f3f3c3697a7603a802427c9226f5dfe6d67ad Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 14 Aug 2006 23:00:27 -0700 Subject: [PATCH] s390: fix arp_tbl lock usage in qeth qeth: bhs must be disabled when accessing neighbour tables. ================================= [ INFO: inconsistent lock state ] Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 5fff1f93973a..e1327b8fce00 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -8510,9 +8510,9 @@ static int qeth_ipv6_init(void) { qeth_old_arp_constructor = arp_tbl.constructor; - write_lock(&arp_tbl.lock); + write_lock_bh(&arp_tbl.lock); arp_tbl.constructor = qeth_arp_constructor; - write_unlock(&arp_tbl.lock); + write_unlock_bh(&arp_tbl.lock); arp_direct_ops = (struct neigh_ops*) kmalloc(sizeof(struct neigh_ops), GFP_KERNEL); @@ -8528,9 +8528,9 @@ qeth_ipv6_init(void) static void qeth_ipv6_uninit(void) { - write_lock(&arp_tbl.lock); + write_lock_bh(&arp_tbl.lock); arp_tbl.constructor = qeth_old_arp_constructor; - write_unlock(&arp_tbl.lock); + write_unlock_bh(&arp_tbl.lock); kfree(arp_direct_ops); } #endif /* CONFIG_QETH_IPV6 */ -- cgit v1.2.2 From ec42cdb624059bb9d9d1accca5ed4345bf8f5fda Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 14 Aug 2006 23:00:28 -0700 Subject: [PATCH] xircom_cb: wire up errors from pci_register_driver() Signed-off-by: Alexey Dobriyan Cc: Jeff Garzik Cc: Dominik Brodowski Cc: Valerie Henson Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tulip/xircom_cb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c index f874e4f6ccf6..cf43390d2c80 100644 --- a/drivers/net/tulip/xircom_cb.c +++ b/drivers/net/tulip/xircom_cb.c @@ -1264,8 +1264,7 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p static int __init xircom_init(void) { - pci_register_driver(&xircom_ops); - return 0; + return pci_register_driver(&xircom_ops); } static void __exit xircom_exit(void) -- cgit v1.2.2 From 11b0bacd717c285c94dbb56505a28434b34f0639 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Mon, 14 Aug 2006 23:00:29 -0700 Subject: [PATCH] PAL: Support of the fixed PHY This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/phy/Kconfig | 17 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/fixed.c | 358 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/mdio_bus.c | 1 + drivers/net/phy/phy_device.c | 51 +++--- include/linux/phy.h | 1 + 6 files changed, 408 insertions(+), 21 deletions(-) create mode 100644 drivers/net/phy/fixed.c diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 2ba6d3a40e2e..b79ec0d7480f 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -56,5 +56,22 @@ config SMSC_PHY ---help--- Currently supports the LAN83C185 PHY +config FIXED_PHY + tristate "Drivers for PHY emulation on fixed speed/link" + depends on PHYLIB + ---help--- + Adds the driver to PHY layer to cover the boards that do not have any PHY bound, + but with the ability to manipulate with speed/link in software. The relavant MII + speed/duplex parameters could be effectively handled in user-specified fuction. + Currently tested with mpc866ads. + +config FIXED_MII_10_FDX + bool "Emulation for 10M Fdx fixed PHY behavior" + depends on FIXED_PHY + +config FIXED_MII_100_FDX + bool "Emulation for 100M Fdx fixed PHY behavior" + depends on FIXED_PHY + endmenu diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index a00e61942525..320f8323123f 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o +obj-$(CONFIG_FIXED_PHY) += fixed.o diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c new file mode 100644 index 000000000000..341036df4710 --- /dev/null +++ b/drivers/net/phy/fixed.c @@ -0,0 +1,358 @@ +/* + * drivers/net/phy/fixed.c + * + * Driver for fixed PHYs, when transceiver is able to operate in one fixed mode. + * + * Author: Vitaly Bordug + * + * Copyright (c) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define MII_REGS_NUM 7 + +/* + The idea is to emulate normal phy behavior by responding with + pre-defined values to mii BMCR read, so that read_status hook could + take all the needed info. +*/ + +struct fixed_phy_status { + u8 link; + u16 speed; + u8 duplex; +}; + +/*----------------------------------------------------------------------------- + * Private information hoder for mii_bus + *-----------------------------------------------------------------------------*/ +struct fixed_info { + u16 *regs; + u8 regs_num; + struct fixed_phy_status phy_status; + struct phy_device *phydev; /* pointer to the container */ + /* link & speed cb */ + int(*link_update)(struct net_device*, struct fixed_phy_status*); + +}; + +/*----------------------------------------------------------------------------- + * If something weird is required to be done with link/speed, + * network driver is able to assign a function to implement this. + * May be useful for PHY's that need to be software-driven. + *-----------------------------------------------------------------------------*/ +int fixed_mdio_set_link_update(struct phy_device* phydev, + int(*link_update)(struct net_device*, struct fixed_phy_status*)) +{ + struct fixed_info *fixed; + + if(link_update == NULL) + return -EINVAL; + + if(phydev) { + if(phydev->bus) { + fixed = phydev->bus->priv; + fixed->link_update = link_update; + return 0; + } + } + return -EINVAL; +} +EXPORT_SYMBOL(fixed_mdio_set_link_update); + +/*----------------------------------------------------------------------------- + * This is used for updating internal mii regs from the status + *-----------------------------------------------------------------------------*/ +static int fixed_mdio_update_regs(struct fixed_info *fixed) +{ + u16 *regs = fixed->regs; + u16 bmsr = 0; + u16 bmcr = 0; + + if(!regs) { + printk(KERN_ERR "%s: regs not set up", __FUNCTION__); + return -EINVAL; + } + + if(fixed->phy_status.link) + bmsr |= BMSR_LSTATUS; + + if(fixed->phy_status.duplex) { + bmcr |= BMCR_FULLDPLX; + + switch ( fixed->phy_status.speed ) { + case 100: + bmsr |= BMSR_100FULL; + bmcr |= BMCR_SPEED100; + break; + + case 10: + bmsr |= BMSR_10FULL; + break; + } + } else { + switch ( fixed->phy_status.speed ) { + case 100: + bmsr |= BMSR_100HALF; + bmcr |= BMCR_SPEED100; + break; + + case 10: + bmsr |= BMSR_100HALF; + break; + } + } + + regs[MII_BMCR] = bmcr; + regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx*/ + + return 0; +} + +static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location) +{ + struct fixed_info *fixed = bus->priv; + + /* if user has registered link update callback, use it */ + if(fixed->phydev) + if(fixed->phydev->attached_dev) { + if(fixed->link_update) { + fixed->link_update(fixed->phydev->attached_dev, + &fixed->phy_status); + fixed_mdio_update_regs(fixed); + } + } + + if ((unsigned int)location >= fixed->regs_num) + return -1; + return fixed->regs[location]; +} + +static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val) +{ + /* do nothing for now*/ + return 0; +} + +static int fixed_mii_reset(struct mii_bus *bus) +{ + /*nothing here - no way/need to reset it*/ + return 0; +} + +static int fixed_config_aneg(struct phy_device *phydev) +{ + /* :TODO:03/13/2006 09:45:37 PM:: + The full autoneg funcionality can be emulated, + but no need to have anything here for now + */ + return 0; +} + +/*----------------------------------------------------------------------------- + * the manual bind will do the magic - with phy_id_mask == 0 + * match will never return true... + *-----------------------------------------------------------------------------*/ +static struct phy_driver fixed_mdio_driver = { + .name = "Fixed PHY", + .features = PHY_BASIC_FEATURES, + .config_aneg = fixed_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +/*----------------------------------------------------------------------------- + * This func is used to create all the necessary stuff, bind + * the fixed phy driver and register all it on the mdio_bus_type. + * speed is either 10 or 100, duplex is boolean. + * number is used to create multiple fixed PHYs, so that several devices can + * utilize them simultaneously. + *-----------------------------------------------------------------------------*/ +static int fixed_mdio_register_device(int number, int speed, int duplex) +{ + struct mii_bus *new_bus; + struct fixed_info *fixed; + struct phy_device *phydev; + int err = 0; + + struct device* dev = kzalloc(sizeof(struct device), GFP_KERNEL); + + if (NULL == dev) + return -ENOMEM; + + new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) { + kfree(dev); + return -ENOMEM; + } + fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL); + + if (NULL == fixed) { + kfree(dev); + kfree(new_bus); + return -ENOMEM; + } + + fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); + fixed->regs_num = MII_REGS_NUM; + fixed->phy_status.speed = speed; + fixed->phy_status.duplex = duplex; + fixed->phy_status.link = 1; + + new_bus->name = "Fixed MII Bus", + new_bus->read = &fixed_mii_read, + new_bus->write = &fixed_mii_write, + new_bus->reset = &fixed_mii_reset, + + /*set up workspace*/ + fixed_mdio_update_regs(fixed); + new_bus->priv = fixed; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + /* create phy_device and register it on the mdio bus */ + phydev = phy_device_create(new_bus, 0, 0); + + /* + Put the phydev pointer into the fixed pack so that bus read/write code could + be able to access for instance attached netdev. Well it doesn't have to do + so, only in case of utilizing user-specified link-update... + */ + fixed->phydev = phydev; + + if(NULL == phydev) { + err = -ENOMEM; + goto device_create_fail; + } + + phydev->irq = -1; + phydev->dev.bus = &mdio_bus_type; + + if(number) + snprintf(phydev->dev.bus_id, BUS_ID_SIZE, + "fixed_%d@%d:%d", number, speed, duplex); + else + snprintf(phydev->dev.bus_id, BUS_ID_SIZE, + "fixed@%d:%d", speed, duplex); + phydev->bus = new_bus; + + err = device_register(&phydev->dev); + if(err) { + printk(KERN_ERR "Phy %s failed to register\n", + phydev->dev.bus_id); + goto bus_register_fail; + } + + /* + the mdio bus has phy_id match... In order not to do it + artificially, we are binding the driver here by hand; + it will be the same for all the fixed phys anyway. + */ + down_write(&phydev->dev.bus->subsys.rwsem); + + phydev->dev.driver = &fixed_mdio_driver.driver; + + err = phydev->dev.driver->probe(&phydev->dev); + if(err < 0) { + printk(KERN_ERR "Phy %s: problems with fixed driver\n",phydev->dev.bus_id); + up_write(&phydev->dev.bus->subsys.rwsem); + goto probe_fail; + } + + device_bind_driver(&phydev->dev); + up_write(&phydev->dev.bus->subsys.rwsem); + + return 0; + +probe_fail: + device_unregister(&phydev->dev); +bus_register_fail: + kfree(phydev); +device_create_fail: + kfree(dev); + kfree(new_bus); + kfree(fixed); + + return err; +} + + +MODULE_DESCRIPTION("Fixed PHY device & driver for PAL"); +MODULE_AUTHOR("Vitaly Bordug"); +MODULE_LICENSE("GPL"); + +static int __init fixed_init(void) +{ + int ret; + int duplex = 0; + + /* register on the bus... Not expected to be matched with anything there... */ + phy_driver_register(&fixed_mdio_driver); + + /* So let the fun begin... + We will create several mdio devices here, and will bound the upper + driver to them. + + Then the external software can lookup the phy bus by searching + fixed@speed:duplex, e.g. fixed@100:1, to be connected to the + virtual 100M Fdx phy. + + In case several virtual PHYs required, the bus_id will be in form + fixed_@:, which make it able even to define + driver-specific link control callback, if for instance PHY is completely + SW-driven. + + */ + +#ifdef CONFIG_FIXED_MII_DUPLEX + duplex = 1; +#endif + +#ifdef CONFIG_FIXED_MII_100_FDX + fixed_mdio_register_device(0, 100, 1); +#endif + +#ifdef CONFIX_FIXED_MII_10_FDX + fixed_mdio_register_device(0, 10, 1); +#endif + return 0; +} + +static void __exit fixed_exit(void) +{ + phy_driver_unregister(&fixed_mdio_driver); + /* :WARNING:02/18/2006 04:32:40 AM:: Cleanup all the created stuff */ +} + +module_init(fixed_init); +module_exit(fixed_exit); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 1dde390c164d..cf6660c93ffa 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -159,6 +159,7 @@ struct bus_type mdio_bus_type = { .suspend = mdio_bus_suspend, .resume = mdio_bus_resume, }; +EXPORT_SYMBOL(mdio_bus_type); int __init mdio_bus_init(void) { diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 1bc1e032c5d6..2d1ecfdc80db 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -45,6 +45,35 @@ static struct phy_driver genphy_driver; extern int mdio_bus_init(void); extern void mdio_bus_exit(void); +struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) +{ + struct phy_device *dev; + /* We allocate the device, and initialize the + * default values */ + dev = kcalloc(1, sizeof(*dev), GFP_KERNEL); + + if (NULL == dev) + return (struct phy_device*) PTR_ERR((void*)-ENOMEM); + + dev->speed = 0; + dev->duplex = -1; + dev->pause = dev->asym_pause = 0; + dev->link = 1; + + dev->autoneg = AUTONEG_ENABLE; + + dev->addr = addr; + dev->phy_id = phy_id; + dev->bus = bus; + + dev->state = PHY_DOWN; + + spin_lock_init(&dev->lock); + + return dev; +} +EXPORT_SYMBOL(phy_device_create); + /* get_phy_device * * description: Reads the ID registers of the PHY at addr on the @@ -78,27 +107,7 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (0xffffffff == phy_id) return NULL; - /* Otherwise, we allocate the device, and initialize the - * default values */ - dev = kcalloc(1, sizeof(*dev), GFP_KERNEL); - - if (NULL == dev) - return ERR_PTR(-ENOMEM); - - dev->speed = 0; - dev->duplex = -1; - dev->pause = dev->asym_pause = 0; - dev->link = 1; - - dev->autoneg = AUTONEG_ENABLE; - - dev->addr = addr; - dev->phy_id = phy_id; - dev->bus = bus; - - dev->state = PHY_DOWN; - - spin_lock_init(&dev->lock); + dev = phy_device_create(bus, addr, phy_id); return dev; } diff --git a/include/linux/phy.h b/include/linux/phy.h index 331521a10a2d..9447a57ee8a9 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -378,6 +378,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct mii_ioctl_data *mii_data, int cmd); int phy_start_interrupts(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); +struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id); extern struct bus_type mdio_bus_type; #endif /* __PHY_H */ -- cgit v1.2.2 From 5b4b8454344a0391bb0f69fda0f4ec8e1f0d2fed Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Mon, 14 Aug 2006 23:00:30 -0700 Subject: [PATCH] FS_ENET: use PAL for mii management This patch should update the fs_enet infrastructure to utilize Phy Abstraction Layer subsystem. Along with the above, there are apparent bugfixes, overhaul and improvements. Signed-off-by: Vitaly Bordug Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/Makefile | 6 +- drivers/net/fs_enet/fec.h | 42 +++ drivers/net/fs_enet/fs_enet-main.c | 207 +++++++++------ drivers/net/fs_enet/fs_enet-mii.c | 505 ------------------------------------- drivers/net/fs_enet/fs_enet.h | 40 +-- drivers/net/fs_enet/mac-fcc.c | 32 ++- drivers/net/fs_enet/mac-fec.c | 142 ++--------- drivers/net/fs_enet/mac-scc.c | 4 +- drivers/net/fs_enet/mii-bitbang.c | 448 ++++++++++++++++---------------- drivers/net/fs_enet/mii-fec.c | 243 ++++++++++++++++++ drivers/net/fs_enet/mii-fixed.c | 91 ------- 11 files changed, 711 insertions(+), 1049 deletions(-) create mode 100644 drivers/net/fs_enet/fec.h delete mode 100644 drivers/net/fs_enet/fs_enet-mii.c create mode 100644 drivers/net/fs_enet/mii-fec.c delete mode 100644 drivers/net/fs_enet/mii-fixed.c diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile index d6dd3f2fb43e..02d4dc18ba69 100644 --- a/drivers/net/fs_enet/Makefile +++ b/drivers/net/fs_enet/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_FS_ENET) += fs_enet.o -obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o -obj-$(CONFIG_8260) += mac-fcc.o +obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o mii-fec.o +obj-$(CONFIG_CPM2) += mac-fcc.o mii-bitbang.o -fs_enet-objs := fs_enet-main.o fs_enet-mii.o mii-bitbang.o mii-fixed.o +fs_enet-objs := fs_enet-main.o diff --git a/drivers/net/fs_enet/fec.h b/drivers/net/fs_enet/fec.h new file mode 100644 index 000000000000..e980527e2b99 --- /dev/null +++ b/drivers/net/fs_enet/fec.h @@ -0,0 +1,42 @@ +#ifndef FS_ENET_FEC_H +#define FS_ENET_FEC_H + +/* CRC polynomium used by the FEC for the multicast group filtering */ +#define FEC_CRC_POLY 0x04C11DB7 + +#define FEC_MAX_MULTICAST_ADDRS 64 + +/* Interrupt events/masks. +*/ +#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */ +#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */ +#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */ +#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */ +#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */ +#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */ +#define FEC_ENET_RXF 0x02000000U /* Full frame received */ +#define FEC_ENET_RXB 0x01000000U /* A buffer was received */ +#define FEC_ENET_MII 0x00800000U /* MII interrupt */ +#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */ + +#define FEC_ECNTRL_PINMUX 0x00000004 +#define FEC_ECNTRL_ETHER_EN 0x00000002 +#define FEC_ECNTRL_RESET 0x00000001 + +#define FEC_RCNTRL_BC_REJ 0x00000010 +#define FEC_RCNTRL_PROM 0x00000008 +#define FEC_RCNTRL_MII_MODE 0x00000004 +#define FEC_RCNTRL_DRT 0x00000002 +#define FEC_RCNTRL_LOOP 0x00000001 + +#define FEC_TCNTRL_FDEN 0x00000004 +#define FEC_TCNTRL_HBC 0x00000002 +#define FEC_TCNTRL_GTS 0x00000001 + + + +/* + * Delay to wait for FEC reset command to complete (in us) + */ +#define FEC_RESET_DELAY 50 +#endif diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index f6abff5846b3..df62506a1787 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -682,35 +683,6 @@ static void fs_free_irq(struct net_device *dev, int irq) (*fep->ops->post_free_irq)(dev, irq); } -/**********************************************************************************/ - -/* This interrupt occurs when the PHY detects a link change. */ -static irqreturn_t -fs_mii_link_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct net_device *dev = dev_id; - struct fs_enet_private *fep; - const struct fs_platform_info *fpi; - - fep = netdev_priv(dev); - fpi = fep->fpi; - - /* - * Acknowledge the interrupt if possible. If we have not - * found the PHY yet we can't process or acknowledge the - * interrupt now. Instead we ignore this interrupt for now, - * which we can do since it is edge triggered. It will be - * acknowledged later by fs_enet_open(). - */ - if (!fep->phy) - return IRQ_NONE; - - fs_mii_ack_int(dev); - fs_mii_link_status_change_check(dev, 0); - - return IRQ_HANDLED; -} - static void fs_timeout(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); @@ -722,10 +694,13 @@ static void fs_timeout(struct net_device *dev) spin_lock_irqsave(&fep->lock, flags); if (dev->flags & IFF_UP) { + phy_stop(fep->phydev); (*fep->ops->stop)(dev); (*fep->ops->restart)(dev); + phy_start(fep->phydev); } + phy_start(fep->phydev); wake = fep->tx_free && !(CBDR_SC(fep->cur_tx) & BD_ENET_TX_READY); spin_unlock_irqrestore(&fep->lock, flags); @@ -733,35 +708,112 @@ static void fs_timeout(struct net_device *dev) netif_wake_queue(dev); } +/*----------------------------------------------------------------------------- + * generic link-change handler - should be sufficient for most cases + *-----------------------------------------------------------------------------*/ +static void generic_adjust_link(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct phy_device *phydev = fep->phydev; + int new_state = 0; + + if (phydev->link) { + + /* adjust to duplex mode */ + if (phydev->duplex != fep->oldduplex){ + new_state = 1; + fep->oldduplex = phydev->duplex; + } + + if (phydev->speed != fep->oldspeed) { + new_state = 1; + fep->oldspeed = phydev->speed; + } + + if (!fep->oldlink) { + new_state = 1; + fep->oldlink = 1; + netif_schedule(dev); + netif_carrier_on(dev); + netif_start_queue(dev); + } + + if (new_state) + fep->ops->restart(dev); + + } else if (fep->oldlink) { + new_state = 1; + fep->oldlink = 0; + fep->oldspeed = 0; + fep->oldduplex = -1; + netif_carrier_off(dev); + netif_stop_queue(dev); + } + + if (new_state && netif_msg_link(fep)) + phy_print_status(phydev); +} + + +static void fs_adjust_link(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&fep->lock, flags); + + if(fep->ops->adjust_link) + fep->ops->adjust_link(dev); + else + generic_adjust_link(dev); + + spin_unlock_irqrestore(&fep->lock, flags); +} + +static int fs_init_phy(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct phy_device *phydev; + + fep->oldlink = 0; + fep->oldspeed = 0; + fep->oldduplex = -1; + if(fep->fpi->bus_id) + phydev = phy_connect(dev, fep->fpi->bus_id, &fs_adjust_link, 0); + else { + printk("No phy bus ID specified in BSP code\n"); + return -EINVAL; + } + if (IS_ERR(phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + fep->phydev = phydev; + + return 0; +} + + static int fs_enet_open(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); - const struct fs_platform_info *fpi = fep->fpi; int r; + int err; /* Install our interrupt handler. */ r = fs_request_irq(dev, fep->interrupt, "fs_enet-mac", fs_enet_interrupt); if (r != 0) { printk(KERN_ERR DRV_MODULE_NAME - ": %s Could not allocate FEC IRQ!", dev->name); + ": %s Could not allocate FS_ENET IRQ!", dev->name); return -EINVAL; } - /* Install our phy interrupt handler */ - if (fpi->phy_irq != -1) { - - r = fs_request_irq(dev, fpi->phy_irq, "fs_enet-phy", fs_mii_link_interrupt); - if (r != 0) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s Could not allocate PHY IRQ!", dev->name); - fs_free_irq(dev, fep->interrupt); - return -EINVAL; - } - } + err = fs_init_phy(dev); + if(err) + return err; - fs_mii_startup(dev); - netif_carrier_off(dev); - fs_mii_link_status_change_check(dev, 1); + phy_start(fep->phydev); return 0; } @@ -769,20 +821,19 @@ static int fs_enet_open(struct net_device *dev) static int fs_enet_close(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); - const struct fs_platform_info *fpi = fep->fpi; unsigned long flags; netif_stop_queue(dev); netif_carrier_off(dev); - fs_mii_shutdown(dev); + phy_stop(fep->phydev); spin_lock_irqsave(&fep->lock, flags); (*fep->ops->stop)(dev); spin_unlock_irqrestore(&fep->lock, flags); /* release any irqs */ - if (fpi->phy_irq != -1) - fs_free_irq(dev, fpi->phy_irq); + phy_disconnect(fep->phydev); + fep->phydev = NULL; fs_free_irq(dev, fep->interrupt); return 0; @@ -830,33 +881,19 @@ static void fs_get_regs(struct net_device *dev, struct ethtool_regs *regs, static int fs_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct fs_enet_private *fep = netdev_priv(dev); - unsigned long flags; - int rc; - - spin_lock_irqsave(&fep->lock, flags); - rc = mii_ethtool_gset(&fep->mii_if, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - - return rc; + return phy_ethtool_gset(fep->phydev, cmd); } static int fs_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct fs_enet_private *fep = netdev_priv(dev); - unsigned long flags; - int rc; - - spin_lock_irqsave(&fep->lock, flags); - rc = mii_ethtool_sset(&fep->mii_if, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - - return rc; + phy_ethtool_sset(fep->phydev, cmd); + return 0; } static int fs_nway_reset(struct net_device *dev) { - struct fs_enet_private *fep = netdev_priv(dev); - return mii_nway_restart(&fep->mii_if); + return 0; } static u32 fs_get_msglevel(struct net_device *dev) @@ -898,7 +935,7 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return -EINVAL; spin_lock_irqsave(&fep->lock, flags); - rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL); + rc = phy_mii_ioctl(fep->phydev, mii, cmd); spin_unlock_irqrestore(&fep->lock, flags); return rc; } @@ -1030,12 +1067,6 @@ static struct net_device *fs_init_instance(struct device *dev, } registered = 1; - err = fs_mii_connect(ndev); - if (err != 0) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s fs_mii_connect failed.\n", ndev->name); - goto err; - } return ndev; @@ -1073,8 +1104,6 @@ static int fs_cleanup_instance(struct net_device *ndev) fpi = fep->fpi; - fs_mii_disconnect(ndev); - unregister_netdev(ndev); dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t), @@ -1196,17 +1225,39 @@ static int __init fs_init(void) r = setup_immap(); if (r != 0) return r; - r = driver_register(&fs_enet_fec_driver); + +#ifdef CONFIG_FS_ENET_HAS_FCC + /* let's insert mii stuff */ + r = fs_enet_mdio_bb_init(); + + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + "BB PHY init failed.\n"); + return r; + } + r = driver_register(&fs_enet_fcc_driver); if (r != 0) goto err; +#endif - r = driver_register(&fs_enet_fcc_driver); +#ifdef CONFIG_FS_ENET_HAS_FEC + r = fs_enet_mdio_fec_init(); + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + "FEC PHY init failed.\n"); + return r; + } + + r = driver_register(&fs_enet_fec_driver); if (r != 0) goto err; +#endif +#ifdef CONFIG_FS_ENET_HAS_SCC r = driver_register(&fs_enet_scc_driver); if (r != 0) goto err; +#endif return 0; err: diff --git a/drivers/net/fs_enet/fs_enet-mii.c b/drivers/net/fs_enet/fs_enet-mii.c deleted file mode 100644 index b7e6e21725cb..000000000000 --- a/drivers/net/fs_enet/fs_enet-mii.c +++ /dev/null @@ -1,505 +0,0 @@ -/* - * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. - * - * Copyright (c) 2003 Intracom S.A. - * by Pantelis Antoniou - * - * 2005 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * Heavily based on original FEC driver by Dan Malek - * and modifications by Joakim Tjernlund - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "fs_enet.h" - -/*************************************************/ - -/* - * Generic PHY support. - * Should work for all PHYs, but link change is detected by polling - */ - -static void generic_timer_callback(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct fs_enet_private *fep = netdev_priv(dev); - - fep->phy_timer_list.expires = jiffies + HZ / 2; - - add_timer(&fep->phy_timer_list); - - fs_mii_link_status_change_check(dev, 0); -} - -static void generic_startup(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */ - fep->phy_timer_list.data = (unsigned long)dev; - fep->phy_timer_list.function = generic_timer_callback; - add_timer(&fep->phy_timer_list); -} - -static void generic_shutdown(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - del_timer_sync(&fep->phy_timer_list); -} - -/* ------------------------------------------------------------------------- */ -/* The Davicom DM9161 is used on the NETTA board */ - -/* register definitions */ - -#define MII_DM9161_ANAR 4 /* Aux. Config Register */ -#define MII_DM9161_ACR 16 /* Aux. Config Register */ -#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */ -#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */ -#define MII_DM9161_INTR 21 /* Interrupt Register */ -#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */ -#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */ - -static void dm9161_startup(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000); - /* Start autonegotiation */ - fs_mii_write(dev, fep->mii_if.phy_id, MII_BMCR, 0x1200); - - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ*8); -} - -static void dm9161_ack_int(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - fs_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR); -} - -static void dm9161_shutdown(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00); -} - -/**********************************************************************************/ - -static const struct phy_info phy_info[] = { - { - .id = 0x00181b88, - .name = "DM9161", - .startup = dm9161_startup, - .ack_int = dm9161_ack_int, - .shutdown = dm9161_shutdown, - }, { - .id = 0, - .name = "GENERIC", - .startup = generic_startup, - .shutdown = generic_shutdown, - }, -}; - -/**********************************************************************************/ - -static int phy_id_detect(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - const struct fs_platform_info *fpi = fep->fpi; - struct fs_enet_mii_bus *bus = fep->mii_bus; - int i, r, start, end, phytype, physubtype; - const struct phy_info *phy; - int phy_hwid, phy_id; - - phy_hwid = -1; - fep->phy = NULL; - - /* auto-detect? */ - if (fpi->phy_addr == -1) { - start = 1; - end = 32; - } else { /* direct */ - start = fpi->phy_addr; - end = start + 1; - } - - for (phy_id = start; phy_id < end; phy_id++) { - /* skip already used phy addresses on this bus */ - if (bus->usage_map & (1 << phy_id)) - continue; - r = fs_mii_read(dev, phy_id, MII_PHYSID1); - if (r == -1 || (phytype = (r & 0xffff)) == 0xffff) - continue; - r = fs_mii_read(dev, phy_id, MII_PHYSID2); - if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff) - continue; - phy_hwid = (phytype << 16) | physubtype; - if (phy_hwid != -1) - break; - } - - if (phy_hwid == -1) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s No PHY detected! range=0x%02x-0x%02x\n", - dev->name, start, end); - return -1; - } - - for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++) - if (phy->id == (phy_hwid >> 4) || phy->id == 0) - break; - - if (i >= ARRAY_SIZE(phy_info)) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s PHY id 0x%08x is not supported!\n", - dev->name, phy_hwid); - return -1; - } - - fep->phy = phy; - - /* mark this address as used */ - bus->usage_map |= (1 << phy_id); - - printk(KERN_INFO DRV_MODULE_NAME - ": %s Phy @ 0x%x, type %s (0x%08x)%s\n", - dev->name, phy_id, fep->phy->name, phy_hwid, - fpi->phy_addr == -1 ? " (auto-detected)" : ""); - - return phy_id; -} - -void fs_mii_startup(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - if (fep->phy->startup) - (*fep->phy->startup) (dev); -} - -void fs_mii_shutdown(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - if (fep->phy->shutdown) - (*fep->phy->shutdown) (dev); -} - -void fs_mii_ack_int(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - if (fep->phy->ack_int) - (*fep->phy->ack_int) (dev); -} - -#define MII_LINK 0x0001 -#define MII_HALF 0x0002 -#define MII_FULL 0x0004 -#define MII_BASE4 0x0008 -#define MII_10M 0x0010 -#define MII_100M 0x0020 -#define MII_1G 0x0040 -#define MII_10G 0x0080 - -/* return full mii info at one gulp, with a usable form */ -static unsigned int mii_full_status(struct mii_if_info *mii) -{ - unsigned int status; - int bmsr, adv, lpa, neg; - struct fs_enet_private* fep = netdev_priv(mii->dev); - - /* first, a dummy read, needed to latch some MII phys */ - (void)mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); - bmsr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); - - /* no link */ - if ((bmsr & BMSR_LSTATUS) == 0) - return 0; - - status = MII_LINK; - - /* Lets look what ANEG says if it's supported - otherwize we shall - take the right values from the platform info*/ - if(!mii->force_media) { - /* autoneg not completed; don't bother */ - if ((bmsr & BMSR_ANEGCOMPLETE) == 0) - return 0; - - adv = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_ADVERTISE); - lpa = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_LPA); - - neg = lpa & adv; - } else { - neg = fep->fpi->bus_info->lpa; - } - - if (neg & LPA_100FULL) - status |= MII_FULL | MII_100M; - else if (neg & LPA_100BASE4) - status |= MII_FULL | MII_BASE4 | MII_100M; - else if (neg & LPA_100HALF) - status |= MII_HALF | MII_100M; - else if (neg & LPA_10FULL) - status |= MII_FULL | MII_10M; - else - status |= MII_HALF | MII_10M; - - return status; -} - -void fs_mii_link_status_change_check(struct net_device *dev, int init_media) -{ - struct fs_enet_private *fep = netdev_priv(dev); - struct mii_if_info *mii = &fep->mii_if; - unsigned int mii_status; - int ok_to_print, link, duplex, speed; - unsigned long flags; - - ok_to_print = netif_msg_link(fep); - - mii_status = mii_full_status(mii); - - if (!init_media && mii_status == fep->last_mii_status) - return; - - fep->last_mii_status = mii_status; - - link = !!(mii_status & MII_LINK); - duplex = !!(mii_status & MII_FULL); - speed = (mii_status & MII_100M) ? 100 : 10; - - if (link == 0) { - netif_carrier_off(mii->dev); - netif_stop_queue(dev); - if (!init_media) { - spin_lock_irqsave(&fep->lock, flags); - (*fep->ops->stop)(dev); - spin_unlock_irqrestore(&fep->lock, flags); - } - - if (ok_to_print) - printk(KERN_INFO "%s: link down\n", mii->dev->name); - - } else { - - mii->full_duplex = duplex; - - netif_carrier_on(mii->dev); - - spin_lock_irqsave(&fep->lock, flags); - fep->duplex = duplex; - fep->speed = speed; - (*fep->ops->restart)(dev); - spin_unlock_irqrestore(&fep->lock, flags); - - netif_start_queue(dev); - - if (ok_to_print) - printk(KERN_INFO "%s: link up, %dMbps, %s-duplex\n", - dev->name, speed, duplex ? "full" : "half"); - } -} - -/**********************************************************************************/ - -int fs_mii_read(struct net_device *dev, int phy_id, int location) -{ - struct fs_enet_private *fep = netdev_priv(dev); - struct fs_enet_mii_bus *bus = fep->mii_bus; - - unsigned long flags; - int ret; - - spin_lock_irqsave(&bus->mii_lock, flags); - ret = (*bus->mii_read)(bus, phy_id, location); - spin_unlock_irqrestore(&bus->mii_lock, flags); - - return ret; -} - -void fs_mii_write(struct net_device *dev, int phy_id, int location, int value) -{ - struct fs_enet_private *fep = netdev_priv(dev); - struct fs_enet_mii_bus *bus = fep->mii_bus; - unsigned long flags; - - spin_lock_irqsave(&bus->mii_lock, flags); - (*bus->mii_write)(bus, phy_id, location, value); - spin_unlock_irqrestore(&bus->mii_lock, flags); -} - -/*****************************************************************************/ - -/* list of all registered mii buses */ -static LIST_HEAD(fs_mii_bus_list); - -static struct fs_enet_mii_bus *lookup_bus(int method, int id) -{ - struct list_head *ptr; - struct fs_enet_mii_bus *bus; - - list_for_each(ptr, &fs_mii_bus_list) { - bus = list_entry(ptr, struct fs_enet_mii_bus, list); - if (bus->bus_info->method == method && - bus->bus_info->id == id) - return bus; - } - return NULL; -} - -static struct fs_enet_mii_bus *create_bus(const struct fs_mii_bus_info *bi) -{ - struct fs_enet_mii_bus *bus; - int ret = 0; - - bus = kmalloc(sizeof(*bus), GFP_KERNEL); - if (bus == NULL) { - ret = -ENOMEM; - goto err; - } - memset(bus, 0, sizeof(*bus)); - spin_lock_init(&bus->mii_lock); - bus->bus_info = bi; - bus->refs = 0; - bus->usage_map = 0; - - /* perform initialization */ - switch (bi->method) { - - case fsmii_fixed: - ret = fs_mii_fixed_init(bus); - if (ret != 0) - goto err; - break; - - case fsmii_bitbang: - ret = fs_mii_bitbang_init(bus); - if (ret != 0) - goto err; - break; -#ifdef CONFIG_FS_ENET_HAS_FEC - case fsmii_fec: - ret = fs_mii_fec_init(bus); - if (ret != 0) - goto err; - break; -#endif - default: - ret = -EINVAL; - goto err; - } - - list_add(&bus->list, &fs_mii_bus_list); - - return bus; - -err: - kfree(bus); - return ERR_PTR(ret); -} - -static void destroy_bus(struct fs_enet_mii_bus *bus) -{ - /* remove from bus list */ - list_del(&bus->list); - - /* nothing more needed */ - kfree(bus); -} - -int fs_mii_connect(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - const struct fs_platform_info *fpi = fep->fpi; - struct fs_enet_mii_bus *bus = NULL; - - /* check method validity */ - switch (fpi->bus_info->method) { - case fsmii_fixed: - case fsmii_bitbang: - break; -#ifdef CONFIG_FS_ENET_HAS_FEC - case fsmii_fec: - break; -#endif - default: - printk(KERN_ERR DRV_MODULE_NAME - ": %s Unknown MII bus method (%d)!\n", - dev->name, fpi->bus_info->method); - return -EINVAL; - } - - bus = lookup_bus(fpi->bus_info->method, fpi->bus_info->id); - - /* if not found create new bus */ - if (bus == NULL) { - bus = create_bus(fpi->bus_info); - if (IS_ERR(bus)) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s MII bus creation failure!\n", dev->name); - return PTR_ERR(bus); - } - } - - bus->refs++; - - fep->mii_bus = bus; - - fep->mii_if.dev = dev; - fep->mii_if.phy_id_mask = 0x1f; - fep->mii_if.reg_num_mask = 0x1f; - fep->mii_if.mdio_read = fs_mii_read; - fep->mii_if.mdio_write = fs_mii_write; - fep->mii_if.force_media = fpi->bus_info->disable_aneg; - fep->mii_if.phy_id = phy_id_detect(dev); - - return 0; -} - -void fs_mii_disconnect(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - struct fs_enet_mii_bus *bus = NULL; - - bus = fep->mii_bus; - fep->mii_bus = NULL; - - if (--bus->refs <= 0) - destroy_bus(bus); -} diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h index e7ec96c964a9..95022c005f75 100644 --- a/drivers/net/fs_enet/fs_enet.h +++ b/drivers/net/fs_enet/fs_enet.h @@ -5,6 +5,7 @@ #include #include #include +#include #include @@ -12,12 +13,30 @@ #ifdef CONFIG_CPM1 #include + +struct fec_info { + fec_t* fecp; + u32 mii_speed; +}; #endif #ifdef CONFIG_CPM2 #include #endif +/* This is used to operate with pins. + Note that the actual port size may + be different; cpm(s) handle it OK */ +struct bb_info { + u8 mdio_dat_msk; + u8 mdio_dir_msk; + u8 *mdio_dir; + u8 *mdio_dat; + u8 mdc_msk; + u8 *mdc_dat; + int delay; +}; + /* hw driver ops */ struct fs_ops { int (*setup_data)(struct net_device *dev); @@ -25,6 +44,7 @@ struct fs_ops { void (*free_bd)(struct net_device *dev); void (*cleanup_data)(struct net_device *dev); void (*set_multicast_list)(struct net_device *dev); + void (*adjust_link)(struct net_device *dev); void (*restart)(struct net_device *dev); void (*stop)(struct net_device *dev); void (*pre_request_irq)(struct net_device *dev, int irq); @@ -100,10 +120,6 @@ struct fs_enet_mii_bus { }; }; -int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus); -int fs_mii_fixed_init(struct fs_enet_mii_bus *bus); -int fs_mii_fec_init(struct fs_enet_mii_bus *bus); - struct fs_enet_private { struct device *dev; /* pointer back to the device (must be initialized first) */ spinlock_t lock; /* during all ops except TX pckt processing */ @@ -130,7 +146,8 @@ struct fs_enet_private { struct fs_enet_mii_bus *mii_bus; int interrupt; - int duplex, speed; /* current settings */ + struct phy_device *phydev; + int oldduplex, oldspeed, oldlink; /* current settings */ /* event masks */ u32 ev_napi_rx; /* mask of NAPI rx events */ @@ -168,15 +185,9 @@ struct fs_enet_private { }; /***************************************************************************/ - -int fs_mii_read(struct net_device *dev, int phy_id, int location); -void fs_mii_write(struct net_device *dev, int phy_id, int location, int value); - -void fs_mii_startup(struct net_device *dev); -void fs_mii_shutdown(struct net_device *dev); -void fs_mii_ack_int(struct net_device *dev); - -void fs_mii_link_status_change_check(struct net_device *dev, int init_media); +int fs_enet_mdio_bb_init(void); +int fs_mii_fixed_init(struct fs_enet_mii_bus *bus); +int fs_enet_mdio_fec_init(void); void fs_init_bds(struct net_device *dev); void fs_cleanup_bds(struct net_device *dev); @@ -194,7 +205,6 @@ int fs_enet_platform_init(void); void fs_enet_platform_cleanup(void); /***************************************************************************/ - /* buffer descriptor access macros */ /* access macros */ diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 64e20982c1fe..1ff2597b8495 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -122,22 +123,32 @@ static int do_pd_setup(struct fs_enet_private *fep) /* Attach the memory for the FCC Parameter RAM */ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram"); - fep->fcc.ep = (void *)r->start; - + fep->fcc.ep = (void *)ioremap(r->start, r->end - r->start + 1); if (fep->fcc.ep == NULL) return -EINVAL; r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs"); - fep->fcc.fccp = (void *)r->start; - + fep->fcc.fccp = (void *)ioremap(r->start, r->end - r->start + 1); if (fep->fcc.fccp == NULL) return -EINVAL; - fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c; + if (fep->fpi->fcc_regs_c) { + + fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c; + } else { + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "fcc_regs_c"); + fep->fcc.fcccp = (void *)ioremap(r->start, + r->end - r->start + 1); + } if (fep->fcc.fcccp == NULL) return -EINVAL; + fep->fcc.mem = (void *)fep->fpi->mem_offset; + if (fep->fcc.mem == NULL) + return -EINVAL; + return 0; } @@ -155,8 +166,6 @@ static int setup_data(struct net_device *dev) if ((unsigned int)fep->fcc.idx >= 3) /* max 3 FCCs */ return -EINVAL; - fep->fcc.mem = (void *)fpi->mem_offset; - if (do_pd_setup(fep) != 0) return -EINVAL; @@ -394,7 +403,7 @@ static void restart(struct net_device *dev) /* adjust to speed (for RMII mode) */ if (fpi->use_rmii) { - if (fep->speed == 100) + if (fep->phydev->speed == 100) C8(fcccp, fcc_gfemr, 0x20); else S8(fcccp, fcc_gfemr, 0x20); @@ -420,7 +429,7 @@ static void restart(struct net_device *dev) S32(fccp, fcc_fpsmr, FCC_PSMR_RMII); /* adjust to duplex mode */ - if (fep->duplex) + if (fep->phydev->duplex) S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); else C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); @@ -486,7 +495,10 @@ static void rx_bd_done(struct net_device *dev) static void tx_kickstart(struct net_device *dev) { - /* nothing */ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + S32(fccp, fcc_ftodr, 0x80); } static u32 get_int_events(struct net_device *dev) diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c index e09547077529..c2c5fd419bd0 100644 --- a/drivers/net/fs_enet/mac-fec.c +++ b/drivers/net/fs_enet/mac-fec.c @@ -46,6 +46,7 @@ #endif #include "fs_enet.h" +#include "fec.h" /*************************************************/ @@ -75,50 +76,8 @@ /* clear bits */ #define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v)) - -/* CRC polynomium used by the FEC for the multicast group filtering */ -#define FEC_CRC_POLY 0x04C11DB7 - -#define FEC_MAX_MULTICAST_ADDRS 64 - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */ -#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */ -#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */ -#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */ -#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */ -#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */ -#define FEC_ENET_RXF 0x02000000U /* Full frame received */ -#define FEC_ENET_RXB 0x01000000U /* A buffer was received */ -#define FEC_ENET_MII 0x00800000U /* MII interrupt */ -#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */ - -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - - -/* Make MII read/write commands for the FEC. -*/ -#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) -#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) -#define mk_mii_end 0 - -#define FEC_MII_LOOPS 10000 - /* - * Delay to wait for FEC reset command to complete (in us) + * Delay to wait for FEC reset command to complete (in us) */ #define FEC_RESET_DELAY 50 @@ -303,13 +262,15 @@ static void restart(struct net_device *dev) int r; u32 addrhi, addrlo; + struct mii_bus* mii = fep->phydev->bus; + struct fec_info* fec_inf = mii->priv; + r = whack_reset(fep->fec.fecp); if (r != 0) printk(KERN_ERR DRV_MODULE_NAME ": %s FEC Reset FAILED!\n", dev->name); - /* - * Set station address. + * Set station address. */ addrhi = ((u32) dev->dev_addr[0] << 24) | ((u32) dev->dev_addr[1] << 16) | @@ -350,12 +311,12 @@ static void restart(struct net_device *dev) FW(fecp, fun_code, 0x78000000); /* - * Set MII speed. + * Set MII speed. */ - FW(fecp, mii_speed, fep->mii_bus->fec.mii_speed); + FW(fecp, mii_speed, fec_inf->mii_speed); /* - * Clear any outstanding interrupt. + * Clear any outstanding interrupt. */ FW(fecp, ievent, 0xffc0); FW(fecp, ivec, (fep->interrupt / 2) << 29); @@ -390,11 +351,12 @@ static void restart(struct net_device *dev) } #endif + FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ /* - * adjust to duplex mode + * adjust to duplex mode */ - if (fep->duplex) { + if (fep->phydev->duplex) { FC(fecp, r_cntrl, FEC_RCNTRL_DRT); FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */ } else { @@ -418,9 +380,11 @@ static void restart(struct net_device *dev) static void stop(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; fec_t *fecp = fep->fec.fecp; - struct fs_enet_mii_bus *bus = fep->mii_bus; - const struct fs_mii_bus_info *bi = bus->bus_info; + + struct fec_info* feci= fep->phydev->bus->priv; + int i; if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0) @@ -444,11 +408,11 @@ static void stop(struct net_device *dev) fs_cleanup_bds(dev); /* shut down FEC1? that's where the mii bus is */ - if (fep->fec.idx == 0 && bus->refs > 1 && bi->method == fsmii_fec) { + if (fpi->has_phy) { FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); FW(fecp, ievent, FEC_ENET_MII); - FW(fecp, mii_speed, bus->fec.mii_speed); + FW(fecp, mii_speed, feci->mii_speed); } } @@ -583,73 +547,3 @@ const struct fs_ops fs_fec_ops = { .free_bd = free_bd, }; -/***********************************************************************/ - -static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) -{ - fec_t *fecp = bus->fec.fecp; - int i, ret = -1; - - if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) - BUG(); - - /* Add PHY address to register command. */ - FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location)); - - for (i = 0; i < FEC_MII_LOOPS; i++) - if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) - break; - - if (i < FEC_MII_LOOPS) { - FW(fecp, ievent, FEC_ENET_MII); - ret = FR(fecp, mii_data) & 0xffff; - } - - return ret; -} - -static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int value) -{ - fec_t *fecp = bus->fec.fecp; - int i; - - /* this must never happen */ - if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) - BUG(); - - /* Add PHY address to register command. */ - FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value)); - - for (i = 0; i < FEC_MII_LOOPS; i++) - if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) - break; - - if (i < FEC_MII_LOOPS) - FW(fecp, ievent, FEC_ENET_MII); -} - -int fs_mii_fec_init(struct fs_enet_mii_bus *bus) -{ - bd_t *bd = (bd_t *)__res; - const struct fs_mii_bus_info *bi = bus->bus_info; - fec_t *fecp; - - if (bi->id != 0) - return -1; - - bus->fec.fecp = &((immap_t *)fs_enet_immap)->im_cpm.cp_fec; - bus->fec.mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) - & 0x3F) << 1; - - fecp = bus->fec.fecp; - - FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ - FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); - FW(fecp, ievent, FEC_ENET_MII); - FW(fecp, mii_speed, bus->fec.mii_speed); - - bus->mii_read = mii_read; - bus->mii_write = mii_write; - - return 0; -} diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c index eaa24fab645f..95ec5872c507 100644 --- a/drivers/net/fs_enet/mac-scc.c +++ b/drivers/net/fs_enet/mac-scc.c @@ -369,7 +369,7 @@ static void restart(struct net_device *dev) W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22); /* Set full duplex mode if needed */ - if (fep->duplex) + if (fep->phydev->duplex) S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE); S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); @@ -500,6 +500,8 @@ static void tx_restart(struct net_device *dev) scc_cr_cmd(fep, CPM_CR_RESTART_TX); } + + /*************************************************************************/ const struct fs_ops fs_scc_ops = { diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c index 48f9cf83ab6f..0b9b8b5c847c 100644 --- a/drivers/net/fs_enet/mii-bitbang.c +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -40,129 +41,25 @@ #include "fs_enet.h" -#ifdef CONFIG_8xx -static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) +static int bitbang_prep_bit(u8 **datp, u8 *mskp, + struct fs_mii_bit *mii_bit) { - immap_t *im = (immap_t *)fs_enet_immap; - void *dir, *dat, *ppar; + void *dat; int adv; u8 msk; - switch (port) { - case fsiop_porta: - dir = &im->im_ioport.iop_padir; - dat = &im->im_ioport.iop_padat; - ppar = &im->im_ioport.iop_papar; - break; - - case fsiop_portb: - dir = &im->im_cpm.cp_pbdir; - dat = &im->im_cpm.cp_pbdat; - ppar = &im->im_cpm.cp_pbpar; - break; - - case fsiop_portc: - dir = &im->im_ioport.iop_pcdir; - dat = &im->im_ioport.iop_pcdat; - ppar = &im->im_ioport.iop_pcpar; - break; - - case fsiop_portd: - dir = &im->im_ioport.iop_pddir; - dat = &im->im_ioport.iop_pddat; - ppar = &im->im_ioport.iop_pdpar; - break; - - case fsiop_porte: - dir = &im->im_cpm.cp_pedir; - dat = &im->im_cpm.cp_pedat; - ppar = &im->im_cpm.cp_pepar; - break; - - default: - printk(KERN_ERR DRV_MODULE_NAME - "Illegal port value %d!\n", port); - return -EINVAL; - } - - adv = bit >> 3; - dir = (char *)dir + adv; - dat = (char *)dat + adv; - ppar = (char *)ppar + adv; - - msk = 1 << (7 - (bit & 7)); - if ((in_8(ppar) & msk) != 0) { - printk(KERN_ERR DRV_MODULE_NAME - "pin %d on port %d is not general purpose!\n", bit, port); - return -EINVAL; - } - - *dirp = dir; - *datp = dat; - *mskp = msk; - - return 0; -} -#endif - -#ifdef CONFIG_8260 -static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) -{ - iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport; - void *dir, *dat, *ppar; - int adv; - u8 msk; - - switch (port) { - case fsiop_porta: - dir = &io->iop_pdira; - dat = &io->iop_pdata; - ppar = &io->iop_ppara; - break; - - case fsiop_portb: - dir = &io->iop_pdirb; - dat = &io->iop_pdatb; - ppar = &io->iop_pparb; - break; - - case fsiop_portc: - dir = &io->iop_pdirc; - dat = &io->iop_pdatc; - ppar = &io->iop_pparc; - break; - - case fsiop_portd: - dir = &io->iop_pdird; - dat = &io->iop_pdatd; - ppar = &io->iop_ppard; - break; - - default: - printk(KERN_ERR DRV_MODULE_NAME - "Illegal port value %d!\n", port); - return -EINVAL; - } + dat = (void*) mii_bit->offset; - adv = bit >> 3; - dir = (char *)dir + adv; + adv = mii_bit->bit >> 3; dat = (char *)dat + adv; - ppar = (char *)ppar + adv; - msk = 1 << (7 - (bit & 7)); - if ((in_8(ppar) & msk) != 0) { - printk(KERN_ERR DRV_MODULE_NAME - "pin %d on port %d is not general purpose!\n", bit, port); - return -EINVAL; - } + msk = 1 << (7 - (mii_bit->bit & 7)); - *dirp = dir; *datp = dat; *mskp = msk; return 0; } -#endif static inline void bb_set(u8 *p, u8 m) { @@ -179,44 +76,44 @@ static inline int bb_read(u8 *p, u8 m) return (in_8(p) & m) != 0; } -static inline void mdio_active(struct fs_enet_mii_bus *bus) +static inline void mdio_active(struct bb_info *bitbang) { - bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); + bb_set(bitbang->mdio_dir, bitbang->mdio_dir_msk); } -static inline void mdio_tristate(struct fs_enet_mii_bus *bus) +static inline void mdio_tristate(struct bb_info *bitbang ) { - bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); + bb_clr(bitbang->mdio_dir, bitbang->mdio_dir_msk); } -static inline int mdio_read(struct fs_enet_mii_bus *bus) +static inline int mdio_read(struct bb_info *bitbang ) { - return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); + return bb_read(bitbang->mdio_dat, bitbang->mdio_dat_msk); } -static inline void mdio(struct fs_enet_mii_bus *bus, int what) +static inline void mdio(struct bb_info *bitbang , int what) { if (what) - bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); + bb_set(bitbang->mdio_dat, bitbang->mdio_dat_msk); else - bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); + bb_clr(bitbang->mdio_dat, bitbang->mdio_dat_msk); } -static inline void mdc(struct fs_enet_mii_bus *bus, int what) +static inline void mdc(struct bb_info *bitbang , int what) { if (what) - bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); + bb_set(bitbang->mdc_dat, bitbang->mdc_msk); else - bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); + bb_clr(bitbang->mdc_dat, bitbang->mdc_msk); } -static inline void mii_delay(struct fs_enet_mii_bus *bus) +static inline void mii_delay(struct bb_info *bitbang ) { - udelay(bus->bus_info->i.bitbang.delay); + udelay(bitbang->delay); } /* Utility to send the preamble, address, and register (common to read and write). */ -static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg) +static void bitbang_pre(struct bb_info *bitbang , int read, u8 addr, u8 reg) { int j; @@ -228,177 +125,284 @@ static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg) * but it is safer and will be much more robust. */ - mdio_active(bus); - mdio(bus, 1); + mdio_active(bitbang); + mdio(bitbang, 1); for (j = 0; j < 32; j++) { - mdc(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); } /* send the start bit (01) and the read opcode (10) or write (10) */ - mdc(bus, 0); - mdio(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mdio(bus, 1); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mdio(bus, read); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mdio(bus, !read); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mdio(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mdio(bitbang, read); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mdio(bitbang, !read); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); /* send the PHY address */ for (j = 0; j < 5; j++) { - mdc(bus, 0); - mdio(bus, (addr & 0x10) != 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, (addr & 0x10) != 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); addr <<= 1; } /* send the register address */ for (j = 0; j < 5; j++) { - mdc(bus, 0); - mdio(bus, (reg & 0x10) != 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, (reg & 0x10) != 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); reg <<= 1; } } -static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) +static int fs_enet_mii_bb_read(struct mii_bus *bus , int phy_id, int location) { u16 rdreg; int ret, j; u8 addr = phy_id & 0xff; u8 reg = location & 0xff; + struct bb_info* bitbang = bus->priv; - bitbang_pre(bus, 1, addr, reg); + bitbang_pre(bitbang, 1, addr, reg); /* tri-state our MDIO I/O pin so we can read */ - mdc(bus, 0); - mdio_tristate(bus); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio_tristate(bitbang); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); /* check the turnaround bit: the PHY should be driving it to zero */ - if (mdio_read(bus) != 0) { + if (mdio_read(bitbang) != 0) { /* PHY didn't drive TA low */ for (j = 0; j < 32; j++) { - mdc(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); } ret = -1; goto out; } - mdc(bus, 0); - mii_delay(bus); + mdc(bitbang, 0); + mii_delay(bitbang); /* read 16 bits of register data, MSB first */ rdreg = 0; for (j = 0; j < 16; j++) { - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 1); + mii_delay(bitbang); rdreg <<= 1; - rdreg |= mdio_read(bus); - mdc(bus, 0); - mii_delay(bus); + rdreg |= mdio_read(bitbang); + mdc(bitbang, 0); + mii_delay(bitbang); } - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); ret = rdreg; out: return ret; } -static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) +static int fs_enet_mii_bb_write(struct mii_bus *bus, int phy_id, int location, u16 val) { int j; + struct bb_info* bitbang = bus->priv; + u8 addr = phy_id & 0xff; u8 reg = location & 0xff; u16 value = val & 0xffff; - bitbang_pre(bus, 0, addr, reg); + bitbang_pre(bitbang, 0, addr, reg); /* send the turnaround (10) */ - mdc(bus, 0); - mdio(bus, 1); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mdio(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mdio(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); /* write 16 bits of register data, MSB first */ for (j = 0; j < 16; j++) { - mdc(bus, 0); - mdio(bus, (value & 0x8000) != 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, (value & 0x8000) != 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); value <<= 1; } /* * Tri-state the MDIO line. */ - mdio_tristate(bus); - mdc(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdio_tristate(bitbang); + mdc(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + return 0; } -int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus) +static int fs_enet_mii_bb_reset(struct mii_bus *bus) +{ + /*nothing here - dunno how to reset it*/ + return 0; +} + +static int fs_mii_bitbang_init(struct bb_info *bitbang, struct fs_mii_bb_platform_info* fmpi) { - const struct fs_mii_bus_info *bi = bus->bus_info; int r; - r = bitbang_prep_bit(&bus->bitbang.mdio_dir, - &bus->bitbang.mdio_dat, - &bus->bitbang.mdio_msk, - bi->i.bitbang.mdio_port, - bi->i.bitbang.mdio_bit); + bitbang->delay = fmpi->delay; + + r = bitbang_prep_bit(&bitbang->mdio_dir, + &bitbang->mdio_dir_msk, + &fmpi->mdio_dir); if (r != 0) return r; - r = bitbang_prep_bit(&bus->bitbang.mdc_dir, - &bus->bitbang.mdc_dat, - &bus->bitbang.mdc_msk, - bi->i.bitbang.mdc_port, - bi->i.bitbang.mdc_bit); + r = bitbang_prep_bit(&bitbang->mdio_dat, + &bitbang->mdio_dat_msk, + &fmpi->mdio_dat); if (r != 0) return r; - bus->mii_read = mii_read; - bus->mii_write = mii_write; + r = bitbang_prep_bit(&bitbang->mdc_dat, + &bitbang->mdc_msk, + &fmpi->mdc_dat); + if (r != 0) + return r; return 0; } + + +static int __devinit fs_enet_mdio_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fs_mii_bb_platform_info *pdata; + struct mii_bus *new_bus; + struct bb_info *bitbang; + int err = 0; + + if (NULL == dev) + return -EINVAL; + + new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) + return -ENOMEM; + + bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL); + + if (NULL == bitbang) + return -ENOMEM; + + new_bus->name = "BB MII Bus", + new_bus->read = &fs_enet_mii_bb_read, + new_bus->write = &fs_enet_mii_bb_write, + new_bus->reset = &fs_enet_mii_bb_reset, + new_bus->id = pdev->id; + + new_bus->phy_mask = ~0x9; + pdata = (struct fs_mii_bb_platform_info *)pdev->dev.platform_data; + + if (NULL == pdata) { + printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id); + return -ENODEV; + } + + /*set up workspace*/ + fs_mii_bitbang_init(bitbang, pdata); + + new_bus->priv = bitbang; + + new_bus->irq = pdata->irq; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + err = mdiobus_register(new_bus); + + if (0 != err) { + printk (KERN_ERR "%s: Cannot register as MDIO bus\n", + new_bus->name); + goto bus_register_fail; + } + + return 0; + +bus_register_fail: + kfree(bitbang); + kfree(new_bus); + + return err; +} + + +static int fs_enet_mdio_remove(struct device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(dev, NULL); + + iounmap((void *) (&bus->priv)); + bus->priv = NULL; + kfree(bus); + + return 0; +} + +static struct device_driver fs_enet_bb_mdio_driver = { + .name = "fsl-bb-mdio", + .bus = &platform_bus_type, + .probe = fs_enet_mdio_probe, + .remove = fs_enet_mdio_remove, +}; + +int fs_enet_mdio_bb_init(void) +{ + return driver_register(&fs_enet_bb_mdio_driver); +} + +void fs_enet_mdio_bb_exit(void) +{ + driver_unregister(&fs_enet_bb_mdio_driver); +} + diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c new file mode 100644 index 000000000000..1328e10caa35 --- /dev/null +++ b/drivers/net/fs_enet/mii-fec.c @@ -0,0 +1,243 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" +#include "fec.h" + +/* Make MII read/write commands for the FEC. +*/ +#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) +#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) +#define mk_mii_end 0 + +#define FEC_MII_LOOPS 10000 + +static int match_has_phy (struct device *dev, void* data) +{ + struct platform_device* pdev = container_of(dev, struct platform_device, dev); + struct fs_platform_info* fpi; + if(strcmp(pdev->name, (char*)data)) + { + return 0; + } + + fpi = pdev->dev.platform_data; + if((fpi)&&(fpi->has_phy)) + return 1; + return 0; +} + +static int fs_mii_fec_init(struct fec_info* fec, struct fs_mii_fec_platform_info *fmpi) +{ + struct resource *r; + fec_t *fecp; + char* name = "fsl-cpm-fec"; + + /* we need fec in order to be useful */ + struct platform_device *fec_pdev = + container_of(bus_find_device(&platform_bus_type, NULL, name, match_has_phy), + struct platform_device, dev); + + if(fec_pdev == NULL) { + printk(KERN_ERR"Unable to find PHY for %s", name); + return -ENODEV; + } + + r = platform_get_resource_byname(fec_pdev, IORESOURCE_MEM, "regs"); + + fec->fecp = fecp = (fec_t*)ioremap(r->start,sizeof(fec_t)); + fec->mii_speed = fmpi->mii_speed; + + setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ + setbits32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); + out_be32(&fecp->fec_ievent, FEC_ENET_MII); + out_be32(&fecp->fec_mii_speed, fec->mii_speed); + + return 0; +} + +static int fs_enet_fec_mii_read(struct mii_bus *bus , int phy_id, int location) +{ + struct fec_info* fec = bus->priv; + fec_t *fecp = fec->fecp; + int i, ret = -1; + + if ((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) + BUG(); + + /* Add PHY address to register command. */ + out_be32(&fecp->fec_mii_data, (phy_id << 23) | mk_mii_read(location)); + + for (i = 0; i < FEC_MII_LOOPS; i++) + if ((in_be32(&fecp->fec_ievent) & FEC_ENET_MII) != 0) + break; + + if (i < FEC_MII_LOOPS) { + out_be32(&fecp->fec_ievent, FEC_ENET_MII); + ret = in_be32(&fecp->fec_mii_data) & 0xffff; + } + + return ret; + +} + +static int fs_enet_fec_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val) +{ + struct fec_info* fec = bus->priv; + fec_t *fecp = fec->fecp; + int i; + + /* this must never happen */ + if ((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) + BUG(); + + /* Add PHY address to register command. */ + out_be32(&fecp->fec_mii_data, (phy_id << 23) | mk_mii_write(location, val)); + + for (i = 0; i < FEC_MII_LOOPS; i++) + if ((in_be32(&fecp->fec_ievent) & FEC_ENET_MII) != 0) + break; + + if (i < FEC_MII_LOOPS) + out_be32(&fecp->fec_ievent, FEC_ENET_MII); + + return 0; + +} + +static int fs_enet_fec_mii_reset(struct mii_bus *bus) +{ + /* nothing here - for now */ + return 0; +} + +static int __devinit fs_enet_fec_mdio_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fs_mii_fec_platform_info *pdata; + struct mii_bus *new_bus; + struct fec_info *fec; + int err = 0; + if (NULL == dev) + return -EINVAL; + new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) + return -ENOMEM; + + fec = kzalloc(sizeof(struct fec_info), GFP_KERNEL); + + if (NULL == fec) + return -ENOMEM; + + new_bus->name = "FEC MII Bus", + new_bus->read = &fs_enet_fec_mii_read, + new_bus->write = &fs_enet_fec_mii_write, + new_bus->reset = &fs_enet_fec_mii_reset, + new_bus->id = pdev->id; + + pdata = (struct fs_mii_fec_platform_info *)pdev->dev.platform_data; + + if (NULL == pdata) { + printk(KERN_ERR "fs_enet FEC mdio %d: Missing platform data!\n", pdev->id); + return -ENODEV; + } + + /*set up workspace*/ + + fs_mii_fec_init(fec, pdata); + new_bus->priv = fec; + + new_bus->irq = pdata->irq; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + err = mdiobus_register(new_bus); + + if (0 != err) { + printk (KERN_ERR "%s: Cannot register as MDIO bus\n", + new_bus->name); + goto bus_register_fail; + } + + return 0; + +bus_register_fail: + kfree(new_bus); + + return err; +} + + +static int fs_enet_fec_mdio_remove(struct device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(dev, NULL); + kfree(bus->priv); + + bus->priv = NULL; + kfree(bus); + + return 0; +} + +static struct device_driver fs_enet_fec_mdio_driver = { + .name = "fsl-cpm-fec-mdio", + .bus = &platform_bus_type, + .probe = fs_enet_fec_mdio_probe, + .remove = fs_enet_fec_mdio_remove, +}; + +int fs_enet_mdio_fec_init(void) +{ + return driver_register(&fs_enet_fec_mdio_driver); +} + +void fs_enet_mdio_fec_exit(void) +{ + driver_unregister(&fs_enet_fec_mdio_driver); +} + diff --git a/drivers/net/fs_enet/mii-fixed.c b/drivers/net/fs_enet/mii-fixed.c deleted file mode 100644 index ae4a9c3bb393..000000000000 --- a/drivers/net/fs_enet/mii-fixed.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. - * - * Copyright (c) 2003 Intracom S.A. - * by Pantelis Antoniou - * - * 2005 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "fs_enet.h" - -static const u16 mii_regs[7] = { - 0x3100, - 0x786d, - 0x0fff, - 0x0fff, - 0x01e1, - 0x45e1, - 0x0003, -}; - -static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) -{ - int ret = 0; - - if ((unsigned int)location >= ARRAY_SIZE(mii_regs)) - return -1; - - if (location != 5) - ret = mii_regs[location]; - else - ret = bus->fixed.lpa; - - return ret; -} - -static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) -{ - /* do nothing */ -} - -int fs_mii_fixed_init(struct fs_enet_mii_bus *bus) -{ - const struct fs_mii_bus_info *bi = bus->bus_info; - - bus->fixed.lpa = 0x45e1; /* default 100Mb, full duplex */ - - /* if speed is fixed at 10Mb, remove 100Mb modes */ - if (bi->i.fixed.speed == 10) - bus->fixed.lpa &= ~LPA_100; - - /* if duplex is half, remove full duplex modes */ - if (bi->i.fixed.duplex == 0) - bus->fixed.lpa &= ~LPA_DUPLEX; - - bus->mii_read = mii_read; - bus->mii_write = mii_write; - - return 0; -} -- cgit v1.2.2 From 2ca2d5e84c19ddbc0126087af6288533a05f1799 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Mon, 14 Aug 2006 23:00:31 -0700 Subject: [PATCH] ppc32: board-specific part of fs_enet update This contains board-specific portion to respect driver changes (for 8272ads , 885ads and 866ads). Altered platform_data structures as well as initial setup routines relevant to fs_enet. Changes to the mpc8560ads ppc/ code are also introduced, but mainly as reference, since the entire board support is going to appear in arch/powerpc. Signed-off-by: Vitaly Bordug Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- arch/ppc/platforms/85xx/mpc8560_ads.c | 89 +++++++++++++ arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 19 +++ arch/ppc/platforms/mpc8272ads_setup.c | 154 +++++++++++---------- arch/ppc/platforms/mpc866ads_setup.c | 192 +++++++++++++-------------- arch/ppc/platforms/mpc885ads_setup.c | 175 +++++++++--------------- arch/ppc/platforms/pq2ads_pd.h | 82 ------------ arch/ppc/syslib/mpc85xx_devices.c | 89 ++++++++++++- arch/ppc/syslib/mpc8xx_devices.c | 8 ++ arch/ppc/syslib/mpc8xx_sys.c | 6 +- arch/ppc/syslib/pq2_devices.c | 5 + arch/ppc/syslib/pq2_sys.c | 3 +- include/asm-ppc/cpm2.h | 95 +++++++++++++ include/asm-ppc/mpc8260.h | 1 + include/asm-ppc/mpc8xx.h | 1 + include/linux/fs_enet_pd.h | 50 +++---- 15 files changed, 578 insertions(+), 391 deletions(-) diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index d90cd24d018e..94badafe4ef1 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -58,6 +59,71 @@ * Setup the architecture * */ +static void init_fcc_ioports(void) +{ + struct immap *immap; + struct io_port *io; + u32 tempval; + + immap = cpm2_immr; + + io = &immap->im_ioport; + /* FCC2/3 are on the ports B/C. */ + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB2_DIRB0 | PB2_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB3_DIRB0; + tempval |= PB3_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB3_PSORB0; + tempval |= PB3_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB3_DIRB0 | PB3_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pdirc, tempval); + + tempval = in_be32(&io->iop_pparc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pparc, tempval); + + /* Port C has clocks...... */ + tempval = in_be32(&io->iop_psorc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_psorc, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_pdirc, tempval); + tempval = in_be32(&io->iop_pparc); + tempval |= (CLK_TRX); + out_be32(&io->iop_pparc, tempval); + + /* Configure Serial Interface clock routing. + * First, clear all FCC bits to zero, + * then set the ones we want. + */ + immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK); + immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE; +} static void __init mpc8560ads_setup_arch(void) @@ -66,6 +132,7 @@ mpc8560ads_setup_arch(void) unsigned int freq; struct gianfar_platform_data *pdata; struct gianfar_mdio_data *mdata; + struct fs_platform_info *fpi; cpm2_reset(); @@ -110,6 +177,28 @@ mpc8560ads_setup_arch(void) memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); } + init_fcc_ioports(); + ppc_sys_device_remove(MPC85xx_CPM_FCC1); + + fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2); + if (fpi) { + memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); + fpi->bus_id = "0:02"; + fpi->phy_addr = 2; + fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; + fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1]; + } + + fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3); + if (fpi) { + memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); + fpi->macaddr[5] += 1; + fpi->bus_id = "0:03"; + fpi->phy_addr = 3; + fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; + fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2]; + } + #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index abf32281655d..c8c322fe3680 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -45,4 +45,23 @@ extern void mpc85xx_ads_map_io(void) __init; #define MPC85XX_PCI1_IO_SIZE 0x01000000 +/* FCC1 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK9-12 */ +#define F1_RXCLK 12 +#define F1_TXCLK 11 + +/* FCC2 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F2_RXCLK 13 +#define F2_TXCLK 14 + +/* FCC3 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F3_RXCLK 15 +#define F3_TXCLK 16 + + #endif /* __MACH_MPC85XX_ADS_H__ */ diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index abb7154de2c7..2a35fe2b9b96 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -56,64 +56,51 @@ static struct fs_uart_platform_info mpc8272_uart_pdata[] = { }, }; -static struct fs_mii_bus_info mii_bus_info = { - .method = fsmii_bitbang, - .id = 0, - .i.bitbang = { - .mdio_port = fsiop_portc, - .mdio_bit = 18, - .mdc_port = fsiop_portc, - .mdc_bit = 19, - .delay = 1, - }, -}; - -static struct fs_platform_info mpc82xx_fcc1_pdata = { - .fs_no = fsid_fcc1, - .cp_page = CPM_CR_FCC1_PAGE, - .cp_block = CPM_CR_FCC1_SBLOCK, - .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), - .clk_route = CMX1_CLK_ROUTE, - .clk_mask = CMX1_CLK_MASK, - .init_ioports = init_fcc1_ioports, - - .phy_addr = 0, -#ifdef PHY_INTERRUPT - .phy_irq = PHY_INTERRUPT, -#else - .phy_irq = -1; -#endif - .mem_offset = FCC1_MEM_OFFSET, - .bus_info = &mii_bus_info, - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, +static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = { + .mdio_dat.bit = 18, + .mdio_dir.bit = 18, + .mdc_dat.bit = 19, + .delay = 1, }; -static struct fs_platform_info mpc82xx_fcc2_pdata = { - .fs_no = fsid_fcc2, - .cp_page = CPM_CR_FCC2_PAGE, - .cp_block = CPM_CR_FCC2_SBLOCK, - .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), - .clk_route = CMX2_CLK_ROUTE, - .clk_mask = CMX2_CLK_MASK, - .init_ioports = init_fcc2_ioports, - - .phy_addr = 3, -#ifdef PHY_INTERRUPT - .phy_irq = PHY_INTERRUPT, -#else - .phy_irq = -1; -#endif - .mem_offset = FCC2_MEM_OFFSET, - .bus_info = &mii_bus_info, - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, +static struct fs_platform_info mpc82xx_enet_pdata[] = { + [fsid_fcc1] = { + .fs_no = fsid_fcc1, + .cp_page = CPM_CR_FCC1_PAGE, + .cp_block = CPM_CR_FCC1_SBLOCK, + + .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), + .clk_route = CMX1_CLK_ROUTE, + .clk_mask = CMX1_CLK_MASK, + .init_ioports = init_fcc1_ioports, + + .mem_offset = FCC1_MEM_OFFSET, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + .bus_id = "0:00", + }, + [fsid_fcc2] = { + .fs_no = fsid_fcc2, + .cp_page = CPM_CR_FCC2_PAGE, + .cp_block = CPM_CR_FCC2_SBLOCK, + .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), + .clk_route = CMX2_CLK_ROUTE, + .clk_mask = CMX2_CLK_MASK, + .init_ioports = init_fcc2_ioports, + + .mem_offset = FCC2_MEM_OFFSET, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + .bus_id = "0:03", + }, }; static void init_fcc1_ioports(void) @@ -209,20 +196,21 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev, bd_t* bi = (void*)__res; int fs_no = fsid_fcc1+pdev->id-1; - mpc82xx_fcc1_pdata.dpram_offset = mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase; - mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c = (u32)cpm2_immr->im_fcc_c; - - switch(fs_no) { - case fsid_fcc1: - memcpy(&mpc82xx_fcc1_pdata.macaddr,bi->bi_enetaddr,6); - pdev->dev.platform_data = &mpc82xx_fcc1_pdata; - break; - case fsid_fcc2: - memcpy(&mpc82xx_fcc2_pdata.macaddr,bi->bi_enetaddr,6); - mpc82xx_fcc2_pdata.macaddr[5] ^= 1; - pdev->dev.platform_data = &mpc82xx_fcc2_pdata; - break; + if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) { + return; } + + mpc82xx_enet_pdata[fs_no].dpram_offset= + (u32)cpm2_immr->im_dprambase; + mpc82xx_enet_pdata[fs_no].fcc_regs_c = + (u32)cpm2_immr->im_fcc_c; + memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6); + + /* prevent dup mac */ + if(fs_no == fsid_fcc2) + mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1; + + pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no]; } static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, @@ -274,6 +262,29 @@ static void init_scc4_uart_ioports(void) iounmap(immap); } +static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev, + int idx) +{ + m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT; + m82xx_mii_bb_pdata.irq[1] = -1; + m82xx_mii_bb_pdata.irq[2] = -1; + m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT; + m82xx_mii_bb_pdata.irq[31] = -1; + + + m82xx_mii_bb_pdata.mdio_dat.offset = + (u32)&cpm2_immr->im_ioport.iop_pdatc; + + m82xx_mii_bb_pdata.mdio_dir.offset = + (u32)&cpm2_immr->im_ioport.iop_pdirc; + + m82xx_mii_bb_pdata.mdc_dat.offset = + (u32)&cpm2_immr->im_ioport.iop_pdatc; + + + pdev->dev.platform_data = &m82xx_mii_bb_pdata; +} + static int mpc8272ads_platform_notify(struct device *dev) { static const struct platform_notify_dev_map dev_map[] = { @@ -285,6 +296,10 @@ static int mpc8272ads_platform_notify(struct device *dev) .bus_id = "fsl-cpm-scc:uart", .rtn = mpc8272ads_fixup_uart_pdata, }, + { + .bus_id = "fsl-bb-mdio", + .rtn = mpc8272ads_fixup_mdio_pdata, + }, { .bus_id = NULL } @@ -319,6 +334,7 @@ int __init mpc8272ads_init(void) ppc_sys_device_enable(MPC82xx_CPM_SCC4); #endif + ppc_sys_device_enable(MPC82xx_MDIO_BB); return 0; } diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index f19b6167c770..e12cece4c9fd 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -1,10 +1,10 @@ -/*arch/ppc/platforms/mpc885ads-setup.c +/*arch/ppc/platforms/mpc866ads-setup.c * - * Platform setup for the Freescale mpc885ads board + * Platform setup for the Freescale mpc866ads board * * Vitaly Bordug * - * Copyright 2005 MontaVista Software Inc. + * Copyright 2005-2006 MontaVista Software Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -42,49 +42,36 @@ static void setup_scc1_ioports(void); static void setup_smc1_ioports(void); static void setup_smc2_ioports(void); -static struct fs_mii_bus_info fec_mii_bus_info = { - .method = fsmii_fec, - .id = 0, -}; - -static struct fs_mii_bus_info scc_mii_bus_info = { - .method = fsmii_fixed, - .id = 0, - .i.fixed.speed = 10, - .i.fixed.duplex = 0, -}; +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; -static struct fs_platform_info mpc8xx_fec_pdata[] = { - { - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; - .use_napi = 1, - .napi_weight = 17, +static struct fs_platform_info mpc8xx_enet_pdata[] = { + [fsid_fec1] = { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, - .phy_addr = 15, - .phy_irq = -1, + .use_napi = 1, + .napi_weight = 17, - .use_rmii = 0, + .init_ioports = setup_fec1_ioports, - .bus_info = &fec_mii_bus_info, - } -}; + .bus_id = "0:0f", + .has_phy = 1, + }, + [fsid_scc1] = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, + .use_napi = 1, + .napi_weight = 17, -static struct fs_platform_info mpc8xx_scc_pdata = { - .rx_ring = 64, - .tx_ring = 8, - .rx_copybreak = 240, - .use_napi = 1, - .napi_weight = 17, - - .phy_addr = -1, - .phy_irq = -1, - - .bus_info = &scc_mii_bus_info, + .init_ioports = setup_scc1_ioports, + .bus_id = "fixed@100:1", + }, }; static struct fs_uart_platform_info mpc866_uart_pdata[] = { @@ -207,63 +194,6 @@ static void setup_scc1_ioports(void) } -static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) -{ - struct fs_platform_info *fpi = pdev->dev.platform_data; - - volatile cpm8xx_t *cp; - bd_t *bd = (bd_t *) __res; - char *e; - int i; - - /* Get pointer to Communication Processor */ - cp = cpmp; - switch (fs_no) { - case fsid_fec1: - fpi = &mpc8xx_fec_pdata[0]; - fpi->init_ioports = &setup_fec1_ioports; - - break; - case fsid_scc1: - fpi = &mpc8xx_scc_pdata; - fpi->init_ioports = &setup_scc1_ioports; - - break; - default: - printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); - return; - } - - pdev->dev.platform_data = fpi; - fpi->fs_no = fs_no; - - e = (unsigned char *)&bd->bi_enetaddr; - for (i = 0; i < 6; i++) - fpi->macaddr[i] = *e++; - - fpi->macaddr[5 - pdev->id]++; - -} - -static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for FEC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) - return; - mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); -} - -static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for SCC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) - return; - - mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); -} - static void setup_smc1_ioports(void) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -315,6 +245,56 @@ static void setup_smc2_ioports(void) } +static int ma_count = 0; + +static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) +{ + struct fs_platform_info *fpi; + + volatile cpm8xx_t *cp; + bd_t *bd = (bd_t *) __res; + char *e; + int i; + + /* Get pointer to Communication Processor */ + cp = cpmp; + + if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) { + printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); + return; + } + + + fpi = &mpc8xx_enet_pdata[fs_no]; + fpi->fs_no = fs_no; + pdev->dev.platform_data = fpi; + + e = (unsigned char *)&bd->bi_enetaddr; + for (i = 0; i < 6; i++) + fpi->macaddr[i] = *e++; + + fpi->macaddr[5] += ma_count++; +} + +static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for FEC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) + return; + mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); +} + +static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for SCC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) + return; + + mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); +} + static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev, int idx) { @@ -359,6 +339,9 @@ static int mpc866ads_platform_notify(struct device *dev) int __init mpc866ads_init(void) { + bd_t *bd = (bd_t *) __res; + struct fs_mii_fec_platform_info* fmpi; + printk(KERN_NOTICE "mpc866ads: Init\n"); platform_notify = mpc866ads_platform_notify; @@ -366,11 +349,20 @@ int __init mpc866ads_init(void) ppc_sys_device_initfunc(); ppc_sys_device_disable_all(); -#ifdef MPC8xx_SECOND_ETH_SCC1 +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC1 ppc_sys_device_enable(MPC8xx_CPM_SCC1); #endif ppc_sys_device_enable(MPC8xx_CPM_FEC1); + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + /* No PHY interrupt line here */ + fmpi->irq[0xf] = -1; + /* Since either of the uarts could be used as console, they need to ready */ #ifdef CONFIG_SERIAL_CPM_SMC1 ppc_sys_device_enable(MPC8xx_CPM_SMC1); @@ -381,6 +373,14 @@ int __init mpc866ads_init(void) ppc_sys_device_enable(MPC8xx_CPM_SMC2); ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); #endif + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + /* No PHY interrupt line here */ + fmpi->irq[0xf] = -1; return 0; } diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index c1fc4a16fea9..5dfa4e6c2af0 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -38,7 +38,10 @@ extern unsigned char __res[]; static void setup_smc1_ioports(void); static void setup_smc2_ioports(void); -static void __init mpc885ads_scc_phy_init(char); +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; +static void setup_fec1_ioports(void); +static void setup_fec2_ioports(void); +static void setup_scc3_ioports(void); static struct fs_uart_platform_info mpc885_uart_pdata[] = { [fsid_smc1_uart] = { @@ -61,23 +64,8 @@ static struct fs_uart_platform_info mpc885_uart_pdata[] = { }, }; -static struct fs_mii_bus_info fec_mii_bus_info = { - .method = fsmii_fec, - .id = 0, -}; - -static struct fs_mii_bus_info scc_mii_bus_info = { -#ifdef CONFIG_SCC_ENET_8xx_FIXED - .method = fsmii_fixed, -#else - .method = fsmii_fec, -#endif - - .id = 0, -}; - -static struct fs_platform_info mpc8xx_fec_pdata[] = { - { +static struct fs_platform_info mpc8xx_enet_pdata[] = { + [fsid_fec1] = { .rx_ring = 128, .tx_ring = 16, .rx_copybreak = 240, @@ -85,11 +73,12 @@ static struct fs_platform_info mpc8xx_fec_pdata[] = { .use_napi = 1, .napi_weight = 17, - .phy_addr = 0, - .phy_irq = SIU_IRQ7, + .init_ioports = setup_fec1_ioports, - .bus_info = &fec_mii_bus_info, - }, { + .bus_id = "0:00", + .has_phy = 1, + }, + [fsid_fec2] = { .rx_ring = 128, .tx_ring = 16, .rx_copybreak = 240, @@ -97,35 +86,32 @@ static struct fs_platform_info mpc8xx_fec_pdata[] = { .use_napi = 1, .napi_weight = 17, - .phy_addr = 1, - .phy_irq = SIU_IRQ7, - - .bus_info = &fec_mii_bus_info, - } -}; + .init_ioports = setup_fec2_ioports, -static struct fs_platform_info mpc8xx_scc_pdata = { - .rx_ring = 64, - .tx_ring = 8, - .rx_copybreak = 240, + .bus_id = "0:01", + .has_phy = 1, + }, + [fsid_scc3] = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, - .use_napi = 1, - .napi_weight = 17, + .use_napi = 1, + .napi_weight = 17, - .phy_addr = 2, -#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED - .phy_irq = -1, + .init_ioports = setup_scc3_ioports, +#ifdef CONFIG_FIXED_MII_10_FDX + .bus_id = "fixed@100:1", #else - .phy_irq = SIU_IRQ7, -#endif - - .bus_info = &scc_mii_bus_info, + .bus_id = "0:02", + #endif + }, }; void __init board_init(void) { - volatile cpm8xx_t *cp = cpmp; - unsigned int *bcsr_io; + cpm8xx_t *cp = cpmp; + unsigned int *bcsr_io; #ifdef CONFIG_FS_ENET immap_t *immap = (immap_t *) IMAP_ADDR; @@ -164,6 +150,14 @@ void __init board_init(void) /* use MDC for MII (common) */ setbits16(&immap->im_ioport.iop_pdpar, 0x0080); clrbits16(&immap->im_ioport.iop_pddir, 0x0080); + bcsr_io = ioremap(BCSR5, sizeof(unsigned long)); + clrbits32(bcsr_io,BCSR5_MII1_EN); + clrbits32(bcsr_io,BCSR5_MII1_RST); +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + clrbits32(bcsr_io,BCSR5_MII2_EN); + clrbits32(bcsr_io,BCSR5_MII2_RST); +#endif + iounmap(bcsr_io); #endif } @@ -194,8 +188,8 @@ static void setup_fec2_ioports(void) /* configure FEC2 pins */ setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc); setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc); - setbits32(&immap->im_cpm.cp_peso, 0x00037800); clrbits32(&immap->im_cpm.cp_peso, 0x000087fc); + setbits32(&immap->im_cpm.cp_peso, 0x00037800); clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); } @@ -213,6 +207,8 @@ static void setup_scc3_ioports(void) /* Enable the PHY. */ + clrbits32(bcsr_io+4, BCSR4_ETH10_RST); + udelay(1000); setbits32(bcsr_io+4, BCSR4_ETH10_RST); /* Configure port A pins for Txd and Rxd. */ @@ -254,37 +250,38 @@ static void setup_scc3_ioports(void) clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA); setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); - setbits32(bcsr_io+1, BCSR1_ETHEN); + setbits32(bcsr_io+4, BCSR1_ETHEN); iounmap(bcsr_io); } +static int mac_count = 0; + static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) { - struct fs_platform_info *fpi = pdev->dev.platform_data; - - volatile cpm8xx_t *cp; + struct fs_platform_info *fpi; bd_t *bd = (bd_t *) __res; char *e; int i; - /* Get pointer to Communication Processor */ - cp = cpmp; + if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) { + printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); + return; + } + + fpi = &mpc8xx_enet_pdata[fs_no]; + switch (fs_no) { case fsid_fec1: - fpi = &mpc8xx_fec_pdata[0]; fpi->init_ioports = &setup_fec1_ioports; break; case fsid_fec2: - fpi = &mpc8xx_fec_pdata[1]; fpi->init_ioports = &setup_fec2_ioports; break; case fsid_scc3: - fpi = &mpc8xx_scc_pdata; fpi->init_ioports = &setup_scc3_ioports; - mpc885ads_scc_phy_init(fpi->phy_addr); break; default: - printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); + printk(KERN_WARNING "Device %s is not supported!\n", pdev->name); return; } @@ -295,7 +292,7 @@ static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) for (i = 0; i < 6; i++) fpi->macaddr[i] = *e++; - fpi->macaddr[5 - pdev->id]++; + fpi->macaddr[5] += mac_count++; } @@ -318,58 +315,6 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); } -/* SCC ethernet controller does not have MII management channel. FEC1 MII - * channel is used to communicate with the 10Mbit PHY. - */ - -#define MII_ECNTRL_PINMUX 0x4 -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_RCNTRL_MII_MODE 0x00000004 - -/* Make MII read/write commands. - */ -#define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) << 18) | \ - ((VAL) & 0xffff) | ((PHY_ADDR) << 23)) - -static void mpc885ads_scc_phy_init(char phy_addr) -{ - volatile immap_t *immap; - volatile fec_t *fecp; - bd_t *bd; - - bd = (bd_t *) __res; - immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */ - fecp = &(immap->im_cpm.cp_fec); - - /* Enable MII pins of the FEC1 - */ - setbits16(&immap->im_ioport.iop_pdpar, 0x0080); - clrbits16(&immap->im_ioport.iop_pddir, 0x0080); - /* Set MII speed to 2.5 MHz - */ - out_be32(&fecp->fec_mii_speed, - ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1); - - /* Enable FEC pin MUX - */ - setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); - setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); - - out_be32(&fecp->fec_mii_data, - mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr)); - udelay(100); - out_be32(&fecp->fec_mii_data, - mk_mii_write(MII_ADVERTISE, - ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr)); - udelay(100); - - /* Disable FEC MII settings - */ - clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); - clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); - out_be32(&fecp->fec_mii_speed, 0); -} - static void setup_smc1_ioports(void) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -462,6 +407,9 @@ static int mpc885ads_platform_notify(struct device *dev) int __init mpc885ads_init(void) { + struct fs_mii_fec_platform_info* fmpi; + bd_t *bd = (bd_t *) __res; + printk(KERN_NOTICE "mpc885ads: Init\n"); platform_notify = mpc885ads_platform_notify; @@ -471,8 +419,17 @@ int __init mpc885ads_init(void) ppc_sys_device_enable(MPC8xx_CPM_FEC1); + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + + /* No PHY interrupt line here */ + fmpi->irq[0xf] = SIU_IRQ7; + #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 - ppc_sys_device_enable(MPC8xx_CPM_SCC1); + ppc_sys_device_enable(MPC8xx_CPM_SCC3); #endif #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h index 8f14a43eafec..672483df8079 100644 --- a/arch/ppc/platforms/pq2ads_pd.h +++ b/arch/ppc/platforms/pq2ads_pd.h @@ -29,86 +29,4 @@ #define F3_RXCLK 13 #define F3_TXCLK 14 -/* Automatically generates register configurations */ -#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ - -#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ -#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ -#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ -#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ -#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ -#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ - -#define PC_F1RXCLK PC_CLK(F1_RXCLK) -#define PC_F1TXCLK PC_CLK(F1_TXCLK) -#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) -#define CMX1_CLK_MASK ((uint)0xff000000) - -#define PC_F2RXCLK PC_CLK(F2_RXCLK) -#define PC_F2TXCLK PC_CLK(F2_TXCLK) -#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) -#define CMX2_CLK_MASK ((uint)0x00ff0000) - -#define PC_F3RXCLK PC_CLK(F3_RXCLK) -#define PC_F3TXCLK PC_CLK(F3_TXCLK) -#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) -#define CMX3_CLK_MASK ((uint)0x0000ff00) - -/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PA1_COL 0x00000001U -#define PA1_CRS 0x00000002U -#define PA1_TXER 0x00000004U -#define PA1_TXEN 0x00000008U -#define PA1_RXDV 0x00000010U -#define PA1_RXER 0x00000020U -#define PA1_TXDAT 0x00003c00U -#define PA1_RXDAT 0x0003c000U -#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) -#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ - PA1_RXDV | PA1_RXER) -#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) -#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) - - -/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB2_TXER 0x00000001U -#define PB2_RXDV 0x00000002U -#define PB2_TXEN 0x00000004U -#define PB2_RXER 0x00000008U -#define PB2_COL 0x00000010U -#define PB2_CRS 0x00000020U -#define PB2_TXDAT 0x000003c0U -#define PB2_RXDAT 0x00003c00U -#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ - PB2_RXER | PB2_RXDV | PB2_TXER) -#define PB2_PSORB1 (PB2_TXEN) -#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) -#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) - - -/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB3_RXDV 0x00004000U -#define PB3_RXER 0x00008000U -#define PB3_TXER 0x00010000U -#define PB3_TXEN 0x00020000U -#define PB3_COL 0x00040000U -#define PB3_CRS 0x00080000U -#define PB3_TXDAT 0x0f000000U -#define PB3_RXDAT 0x00f00000U -#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ - PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) -#define PB3_PSORB1 0 -#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) -#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) - -#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) -#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) - #endif diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 7735336f5b8f..325136e5aee0 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -16,9 +16,11 @@ #include #include #include +#include #include #include #include +#include /* We use offsets for IORESOURCE_MEM since we do not know at compile time * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup @@ -82,6 +84,60 @@ static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = { .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, }; +static struct fs_platform_info mpc85xx_fcc1_pdata = { + .fs_no = fsid_fcc1, + .cp_page = CPM_CR_FCC1_PAGE, + .cp_block = CPM_CR_FCC1_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX1_CLK_MASK, + .clk_route = CMX1_CLK_ROUTE, + .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), + + .mem_offset = FCC1_MEM_OFFSET, +}; + +static struct fs_platform_info mpc85xx_fcc2_pdata = { + .fs_no = fsid_fcc2, + .cp_page = CPM_CR_FCC2_PAGE, + .cp_block = CPM_CR_FCC2_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX2_CLK_MASK, + .clk_route = CMX2_CLK_ROUTE, + .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), + + .mem_offset = FCC2_MEM_OFFSET, +}; + +static struct fs_platform_info mpc85xx_fcc3_pdata = { + .fs_no = fsid_fcc3, + .cp_page = CPM_CR_FCC3_PAGE, + .cp_block = CPM_CR_FCC3_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX3_CLK_MASK, + .clk_route = CMX3_CLK_ROUTE, + .clk_trx = (PC_F3RXCLK | PC_F3TXCLK), + + .mem_offset = FCC3_MEM_OFFSET, +}; + static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = 0x4500, @@ -318,18 +374,27 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC85xx_CPM_FCC1] = { .name = "fsl-cpm-fcc", .id = 1, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc1_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91300, .end = 0x9131F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x91380, .end = 0x9139F, .flags = IORESOURCE_MEM, }, + { + .name = "fcc_pram", + .start = 0x88400, + .end = 0x884ff, + .flags = IORESOURCE_MEM, + }, { .start = SIU_INT_FCC1, .end = SIU_INT_FCC1, @@ -340,18 +405,27 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC85xx_CPM_FCC2] = { .name = "fsl-cpm-fcc", .id = 2, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc2_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91320, .end = 0x9133F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x913A0, .end = 0x913CF, .flags = IORESOURCE_MEM, }, + { + .name = "fcc_pram", + .start = 0x88500, + .end = 0x885ff, + .flags = IORESOURCE_MEM, + }, { .start = SIU_INT_FCC2, .end = SIU_INT_FCC2, @@ -362,18 +436,27 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC85xx_CPM_FCC3] = { .name = "fsl-cpm-fcc", .id = 3, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc3_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91340, .end = 0x9135F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x913D0, .end = 0x913FF, .flags = IORESOURCE_MEM, }, + { + .name = "fcc_pram", + .start = 0x88600, + .end = 0x886ff, + .flags = IORESOURCE_MEM, + }, { .start = SIU_INT_FCC3, .end = SIU_INT_FCC3, diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 6f536383866e..cf5ab47487a7 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -218,6 +218,14 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, + + [MPC8xx_MDIO_FEC] = { + .name = "fsl-cpm-fec-mdio", + .id = 0, + .num_resources = 0, + + }, + }; static int __init mach_mpc8xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c index eee213284855..18ba1d7ff9f1 100644 --- a/arch/ppc/syslib/mpc8xx_sys.c +++ b/arch/ppc/syslib/mpc8xx_sys.c @@ -22,7 +22,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "MPC86X", .mask = 0xFFFFFFFF, .value = 0x00000000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC8xx_CPM_FEC1, @@ -32,13 +32,14 @@ struct ppc_sys_spec ppc_sys_specs[] = { MPC8xx_CPM_SCC4, MPC8xx_CPM_SMC1, MPC8xx_CPM_SMC2, + MPC8xx_MDIO_FEC, }, }, { .ppc_sys_name = "MPC885", .mask = 0xFFFFFFFF, .value = 0x00000000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC8xx_CPM_FEC1, @@ -49,6 +50,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { MPC8xx_CPM_SCC4, MPC8xx_CPM_SMC1, MPC8xx_CPM_SMC2, + MPC8xx_MDIO_FEC, }, }, { /* default match */ diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c index 8692d00c08c4..fefbc217a56d 100644 --- a/arch/ppc/syslib/pq2_devices.c +++ b/arch/ppc/syslib/pq2_devices.c @@ -369,6 +369,11 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, + [MPC82xx_MDIO_BB] = { + .name = "fsl-bb-mdio", + .id = 0, + .num_resources = 0, + }, }; static int __init mach_mpc82xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index fee8948162b9..f52600c0db20 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -139,13 +139,14 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8272", .mask = 0x0000ff00, .value = 0x00000c00, - .num_devices = 12, + .num_devices = 13, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1, + MPC82xx_MDIO_BB, }, }, /* below is a list of the 8280 family of processors */ diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index c70344b91049..f6a7ff04ffe5 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1093,5 +1093,100 @@ typedef struct im_idma { #define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ +/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK + * in order to use clock-computing stuff below for the FCC x + */ + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) +#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) + +#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PC3_TXDAT 0x00000010U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) +#define PC3_DIRC1 (PC3_TXDAT) + +/* Handy macro to specify mem for FCCs*/ +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2) + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h index 4b93481e7679..23579d4afae7 100644 --- a/include/asm-ppc/mpc8260.h +++ b/include/asm-ppc/mpc8260.h @@ -82,6 +82,7 @@ enum ppc_sys_devices { MPC82xx_CPM_SMC2, MPC82xx_CPM_USB, MPC82xx_SEC1, + MPC82xx_MDIO_BB, NUM_PPC_SYS_DEVS, }; diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h index adcce33f20ae..d3a2f2fe230c 100644 --- a/include/asm-ppc/mpc8xx.h +++ b/include/asm-ppc/mpc8xx.h @@ -110,6 +110,7 @@ enum ppc_sys_devices { MPC8xx_CPM_SMC1, MPC8xx_CPM_SMC2, MPC8xx_CPM_USB, + MPC8xx_MDIO_FEC, NUM_PPC_SYS_DEVS, }; diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h index 783c476b8674..74ed35a00a94 100644 --- a/include/linux/fs_enet_pd.h +++ b/include/linux/fs_enet_pd.h @@ -69,34 +69,21 @@ enum fs_ioport { fsiop_porte, }; -struct fs_mii_bus_info { - int method; /* mii method */ - int id; /* the id of the mii_bus */ - int disable_aneg; /* if the controller needs to negothiate speed & duplex */ - int lpa; /* the default board-specific vallues will be applied otherwise */ - - union { - struct { - int duplex; - int speed; - } fixed; - - struct { - /* nothing */ - } fec; - - struct { - /* nothing */ - } scc; - - struct { - int mdio_port; /* port & bit for MDIO */ - int mdio_bit; - int mdc_port; /* port & bit for MDC */ - int mdc_bit; - int delay; /* delay in us */ - } bitbang; - } i; +struct fs_mii_bit { + u32 offset; + u8 bit; + u8 polarity; +}; +struct fs_mii_bb_platform_info { + struct fs_mii_bit mdio_dir; + struct fs_mii_bit mdio_dat; + struct fs_mii_bit mdc_dat; + int mdio_port; /* port & bit for MDIO */ + int mdio_bit; + int mdc_port; /* port & bit for MDC */ + int mdc_bit; + int delay; /* delay in us */ + int irq[32]; /* irqs per phy's */ }; struct fs_platform_info { @@ -119,6 +106,7 @@ struct fs_platform_info { u32 device_flags; int phy_addr; /* the phy address (-1 no phy) */ + const char* bus_id; int phy_irq; /* the phy irq (if it exists) */ const struct fs_mii_bus_info *bus_info; @@ -130,6 +118,10 @@ struct fs_platform_info { int napi_weight; /* NAPI weight */ int use_rmii; /* use RMII mode */ + int has_phy; /* if the network is phy container as well...*/ +}; +struct fs_mii_fec_platform_info { + u32 irq[32]; + u32 mii_speed; }; - #endif -- cgit v1.2.2 From a76b044af147135b5fb7570aba35d4908f143cc9 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Wed, 16 Aug 2006 01:52:23 +0200 Subject: [PATCH] WAN: fix C101 card carrier handling Hi, One of my recent changes broke C101 carrier handling, this patch fixes it. Also fixes an old TX underrun checking bug. 2.6.18 material. Please apply. Thanks. Signed-off-by: Krzysztof Halasa Signed-off-by: Jeff Garzik --- drivers/net/wan/c101.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index 435e91ec4620..6b63b350cd52 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -118,7 +118,7 @@ static inline void openwin(card_t *card, u8 page) static inline void set_carrier(port_t *port) { - if (!sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD) + if (!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD)) netif_carrier_on(port_to_dev(port)); else netif_carrier_off(port_to_dev(port)); @@ -127,10 +127,10 @@ static inline void set_carrier(port_t *port) static void sca_msci_intr(port_t *port) { - u8 stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI ST1 status */ + u8 stat = sca_in(MSCI0_OFFSET + ST1, port); /* read MSCI ST1 status */ - /* Reset MSCI TX underrun status bit */ - sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, port); + /* Reset MSCI TX underrun and CDCD (ignored) status bit */ + sca_out(stat & (ST1_UDRN | ST1_CDCD), MSCI0_OFFSET + ST1, port); if (stat & ST1_UDRN) { struct net_device_stats *stats = hdlc_stats(port_to_dev(port)); @@ -138,6 +138,7 @@ static void sca_msci_intr(port_t *port) stats->tx_fifo_errors++; } + stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI1 ST1 status */ /* Reset MSCI CDCD status bit - uses ch#2 DCD input */ sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port); -- cgit v1.2.2 From 78bd4d484f81a611ef6ff02f909e576cb9aac7f2 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Aug 2006 08:33:23 +0200 Subject: [PATCH] sys_ioprio_set: minor do_each_thread+break fix From include/linux/sched.h: * Careful: do_each_thread/while_each_thread is a double loop so * 'break' will not work as expected - use goto instead. */ Signed-off-by: Oleg Nesterov Signed-off-by: Jens Axboe --- fs/ioprio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ioprio.c b/fs/ioprio.c index 93aa5715f224..3db31038e9ab 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -111,9 +111,9 @@ asmlinkage long sys_ioprio_set(int which, int who, int ioprio) continue; ret = set_task_ioprio(p, ioprio); if (ret) - break; + goto free_uid; } while_each_thread(g, p); - +free_uid: if (who) free_uid(user); break; -- cgit v1.2.2 From 9f83e45eb54fc7198dc59fc63255341851ba4c48 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Aug 2006 08:34:15 +0200 Subject: [PATCH] Fix current_io_context() vs set_task_ioprio() race I know nothing about io scheduler, but I suspect set_task_ioprio() is not safe. current_io_context() initializes "struct io_context", then sets ->io_context. set_task_ioprio() running on another cpu may see the changes out of order, so ->set_ioprio(ioc) may use io_context which was not initialized properly. Signed-off-by: Oleg Nesterov Signed-off-by: Jens Axboe --- block/ll_rw_blk.c | 2 ++ fs/ioprio.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 61d6b3c65b66..ddd9253f9d55 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -3628,6 +3628,8 @@ struct io_context *current_io_context(gfp_t gfp_flags) ret->nr_batch_requests = 0; /* because this is 0 */ ret->aic = NULL; ret->cic_root.rb_node = NULL; + /* make sure set_task_ioprio() sees the settings above */ + smp_wmb(); tsk->io_context = ret; } diff --git a/fs/ioprio.c b/fs/ioprio.c index 3db31038e9ab..06578311c63f 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -44,6 +44,9 @@ static int set_task_ioprio(struct task_struct *task, int ioprio) task->ioprio = ioprio; ioc = task->io_context; + /* see wmb() in current_io_context() */ + smp_read_barrier_depends(); + if (ioc && ioc->set_ioprio) ioc->set_ioprio(ioc, ioprio); -- cgit v1.2.2 From e014ff8d4285b81f0de0719d8eee72bc50bfd4be Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Aug 2006 10:02:50 +0200 Subject: [PATCH] uninline ioprio_best() Saves 376 bytes (5 callers) for me. Signed-off-by: Oleg Nesterov Signed-off-by: Jens Axboe --- fs/ioprio.c | 23 +++++++++++++++++++++++ include/linux/ioprio.h | 23 +---------------------- 2 files changed, 24 insertions(+), 22 deletions(-) diff --git a/fs/ioprio.c b/fs/ioprio.c index 06578311c63f..78b1deae3fa2 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -140,6 +140,29 @@ out: return ret; } +int ioprio_best(unsigned short aprio, unsigned short bprio) +{ + unsigned short aclass = IOPRIO_PRIO_CLASS(aprio); + unsigned short bclass = IOPRIO_PRIO_CLASS(bprio); + + if (!ioprio_valid(aprio)) + return bprio; + if (!ioprio_valid(bprio)) + return aprio; + + if (aclass == IOPRIO_CLASS_NONE) + aclass = IOPRIO_CLASS_BE; + if (bclass == IOPRIO_CLASS_NONE) + bclass = IOPRIO_CLASS_BE; + + if (aclass == bclass) + return min(aprio, bprio); + if (aclass > bclass) + return bprio; + else + return aprio; +} + asmlinkage long sys_ioprio_get(int which, int who) { struct task_struct *g, *p; diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h index 88d5961f7a3f..8e2042b9d471 100644 --- a/include/linux/ioprio.h +++ b/include/linux/ioprio.h @@ -59,27 +59,6 @@ static inline int task_nice_ioprio(struct task_struct *task) /* * For inheritance, return the highest of the two given priorities */ -static inline int ioprio_best(unsigned short aprio, unsigned short bprio) -{ - unsigned short aclass = IOPRIO_PRIO_CLASS(aprio); - unsigned short bclass = IOPRIO_PRIO_CLASS(bprio); - - if (!ioprio_valid(aprio)) - return bprio; - if (!ioprio_valid(bprio)) - return aprio; - - if (aclass == IOPRIO_CLASS_NONE) - aclass = IOPRIO_CLASS_BE; - if (bclass == IOPRIO_CLASS_NONE) - bclass = IOPRIO_CLASS_BE; - - if (aclass == bclass) - return min(aprio, bprio); - if (aclass > bclass) - return bprio; - else - return aprio; -} +extern int ioprio_best(unsigned short aprio, unsigned short bprio); #endif -- cgit v1.2.2 From be33c3a67bb717508ab1eab0f2fa570fabcbc4d2 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Aug 2006 08:36:12 +0200 Subject: [PATCH] cfq_cic_link: fix usage of wrong cfq_io_context Obviously, cfq_cic_link() shouldn't free a just allocated cfq_io_context? The dead key is from __cic, so drop that. Signed-off-by: Oleg Nesterov Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index aae3123bf3ee..3a3aee08ec5f 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1561,7 +1561,7 @@ restart: /* ->key must be copied to avoid race with cfq_exit_queue() */ k = __cic->key; if (unlikely(!k)) { - cfq_drop_dead_cic(ioc, cic); + cfq_drop_dead_cic(ioc, __cic); goto restart; } -- cgit v1.2.2 From f1a58ecae527fc67c87ce4dcb9e73894f64aadfe Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 20 Aug 2006 17:56:38 +0900 Subject: [PATCH] ata_piix: fix ghost device probing by honoring PCS present bits Move out PCS handling from piix_sata_prereset() into piix_sata_present_mask() and use it from newly implemented piix_sata_softreset(). Class codes for devices which are indicated to be absent by PCS are cleared to ATA_DEV_NONE. This fixes ghost device problem reported on ICH6 and 7. This patch moves PCS handling from prereset to softreset, which makes two behavior changes. * perform softreset even when PCS indicates no device * PCS handling is repeated before retrying softresets due to reset failures. Both behavior changes are intended and more consistent with how other drivers behave. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 60 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 43 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 5e8afc876980..01b3530cf6df 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -531,27 +531,25 @@ static void piix_pata_error_handler(struct ata_port *ap) } /** - * piix_sata_prereset - prereset for SATA host controller + * piix_sata_present_mask - determine present mask for SATA host controller * @ap: Target port * - * Reads and configures SATA PCI device's PCI config register - * Port Configuration and Status (PCS) to determine port and - * device availability. Return -ENODEV to skip reset if no - * device is present. + * Reads SATA PCI device's PCI config register Port Configuration + * and Status (PCS) to determine port and device availability. * * LOCKING: * None (inherited from caller). * * RETURNS: - * 0 if device is present, -ENODEV otherwise. + * determined present_mask */ -static int piix_sata_prereset(struct ata_port *ap) +static unsigned int piix_sata_present_mask(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); struct piix_host_priv *hpriv = ap->host_set->private_data; const unsigned int *map = hpriv->map; int base = 2 * ap->hard_port_no; - unsigned int present = 0; + unsigned int present_mask = 0; int port, i; u16 pcs; @@ -564,24 +562,52 @@ static int piix_sata_prereset(struct ata_port *ap) continue; if ((ap->flags & PIIX_FLAG_IGNORE_PCS) || (pcs & 1 << (hpriv->map_db->present_shift + port))) - present = 1; + present_mask |= 1 << i; } - DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n", - ap->id, pcs, present); + DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", + ap->id, pcs, present_mask); - if (!present) { - ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); - ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; - return 0; + return present_mask; +} + +/** + * piix_sata_softreset - reset SATA host port via ATA SRST + * @ap: port to reset + * @classes: resulting classes of attached devices + * + * Reset SATA host port via ATA SRST. On controllers with + * reliable PCS present bits, the bits are used to determine + * device presence. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int piix_sata_softreset(struct ata_port *ap, unsigned int *classes) +{ + unsigned int present_mask; + int i, rc; + + present_mask = piix_sata_present_mask(ap); + + rc = ata_std_softreset(ap, classes); + if (rc) + return rc; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (!(present_mask & (1 << i))) + classes[i] = ATA_DEV_NONE; } - return ata_std_prereset(ap); + return 0; } static void piix_sata_error_handler(struct ata_port *ap) { - ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, + ata_bmdma_drive_eh(ap, ata_std_prereset, piix_sata_softreset, NULL, ata_std_postreset); } -- cgit v1.2.2 From c164a9ba0a8870c5c9d353f63085319931d69f23 Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Tue, 22 Aug 2006 11:50:39 -0700 Subject: Fix sctp privilege elevation (CVE-2006-3745) sctp_make_abort_user() now takes the msg_len along with the msg so that we don't have to recalculate the bytes in iovec. It also uses memcpy_fromiovec() so that we don't go beyond the length allocated. It is good to have this fix even if verify_iovec() is fixed to return error on overflow. Signed-off-by: Sridhar Samudrala Signed-off-by: Greg Kroah-Hartman --- include/net/sctp/sctp.h | 13 ------------- include/net/sctp/sm.h | 3 +-- net/sctp/sm_make_chunk.c | 30 +++++++++--------------------- net/sctp/sm_statefuns.c | 20 ++++---------------- net/sctp/socket.c | 10 +++++++++- 5 files changed, 23 insertions(+), 53 deletions(-) diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index a9663b49ea54..92eae0e0f3f1 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -404,19 +404,6 @@ static inline int sctp_list_single_entry(struct list_head *head) return ((head->next != head) && (head->next == head->prev)); } -/* Calculate the size (in bytes) occupied by the data of an iovec. */ -static inline size_t get_user_iov_size(struct iovec *iov, int iovlen) -{ - size_t retval = 0; - - for (; iovlen > 0; --iovlen) { - retval += iov->iov_len; - iov++; - } - - return retval; -} - /* Generate a random jitter in the range of -50% ~ +50% of input RTO. */ static inline __s32 sctp_jitter(__u32 rto) { diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 1eac3d0eb7a9..de313de4fefe 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -221,8 +221,7 @@ struct sctp_chunk *sctp_make_abort_no_data(const struct sctp_association *, const struct sctp_chunk *, __u32 tsn); struct sctp_chunk *sctp_make_abort_user(const struct sctp_association *, - const struct sctp_chunk *, - const struct msghdr *); + const struct msghdr *, size_t msg_len); struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *, const struct sctp_chunk *, const __u8 *, diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 4f11f5858209..17b509282cf2 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -806,38 +806,26 @@ no_mem: /* Helper to create ABORT with a SCTP_ERROR_USER_ABORT error. */ struct sctp_chunk *sctp_make_abort_user(const struct sctp_association *asoc, - const struct sctp_chunk *chunk, - const struct msghdr *msg) + const struct msghdr *msg, + size_t paylen) { struct sctp_chunk *retval; - void *payload = NULL, *payoff; - size_t paylen = 0; - struct iovec *iov = NULL; - int iovlen = 0; - - if (msg) { - iov = msg->msg_iov; - iovlen = msg->msg_iovlen; - paylen = get_user_iov_size(iov, iovlen); - } + void *payload = NULL; + int err; - retval = sctp_make_abort(asoc, chunk, sizeof(sctp_errhdr_t) + paylen); + retval = sctp_make_abort(asoc, NULL, sizeof(sctp_errhdr_t) + paylen); if (!retval) goto err_chunk; if (paylen) { /* Put the msg_iov together into payload. */ - payload = kmalloc(paylen, GFP_ATOMIC); + payload = kmalloc(paylen, GFP_KERNEL); if (!payload) goto err_payload; - payoff = payload; - for (; iovlen > 0; --iovlen) { - if (copy_from_user(payoff, iov->iov_base,iov->iov_len)) - goto err_copy; - payoff += iov->iov_len; - iov++; - } + err = memcpy_fromiovec(payload, msg->msg_iov, paylen); + if (err < 0) + goto err_copy; } sctp_init_cause(retval, SCTP_ERROR_USER_ABORT, payload, paylen); diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index ead3f1b0ea3d..5b5ae7958322 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -4031,18 +4031,12 @@ sctp_disposition_t sctp_sf_do_9_1_prm_abort( * from its upper layer, but retransmits data to the far end * if necessary to fill gaps. */ - struct msghdr *msg = arg; - struct sctp_chunk *abort; + struct sctp_chunk *abort = arg; sctp_disposition_t retval; retval = SCTP_DISPOSITION_CONSUME; - /* Generate ABORT chunk to send the peer. */ - abort = sctp_make_abort_user(asoc, NULL, msg); - if (!abort) - retval = SCTP_DISPOSITION_NOMEM; - else - sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); /* Even if we can't send the ABORT due to low memory delete the * TCB. This is a departure from our typical NOMEM handling. @@ -4166,8 +4160,7 @@ sctp_disposition_t sctp_sf_cookie_wait_prm_abort( void *arg, sctp_cmd_seq_t *commands) { - struct msghdr *msg = arg; - struct sctp_chunk *abort; + struct sctp_chunk *abort = arg; sctp_disposition_t retval; /* Stop T1-init timer */ @@ -4175,12 +4168,7 @@ sctp_disposition_t sctp_sf_cookie_wait_prm_abort( SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT)); retval = SCTP_DISPOSITION_CONSUME; - /* Generate ABORT chunk to send the peer */ - abort = sctp_make_abort_user(asoc, NULL, msg); - if (!abort) - retval = SCTP_DISPOSITION_NOMEM; - else - sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE, SCTP_STATE(SCTP_STATE_CLOSED)); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 54722e622e6d..fde3f55bfd4b 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1520,8 +1520,16 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, goto out_unlock; } if (sinfo_flags & SCTP_ABORT) { + struct sctp_chunk *chunk; + + chunk = sctp_make_abort_user(asoc, msg, msg_len); + if (!chunk) { + err = -ENOMEM; + goto out_unlock; + } + SCTP_DEBUG_PRINTK("Aborting association: %p\n", asoc); - sctp_primitive_ABORT(asoc, msg); + sctp_primitive_ABORT(asoc, chunk); err = 0; goto out_unlock; } -- cgit v1.2.2 From 00a2b0f6dd2372842df73de72d51621b539fea44 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 15 Aug 2006 13:56:26 +0200 Subject: Fix possible UDF deadlock and memory corruption (CVE-2006-4145) UDF code is not really ready to handle extents larger that 1GB. This is the easy way to forbid creating those. Also truncation code did not count with the case when there are no extents in the file and we are extending the file. Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman --- fs/udf/super.c | 2 +- fs/udf/truncate.c | 64 +++++++++++++++++++++++++++++++++---------------------- 2 files changed, 40 insertions(+), 26 deletions(-) diff --git a/fs/udf/super.c b/fs/udf/super.c index 7de172efa084..fcce1a21a51b 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -1659,7 +1659,7 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent) iput(inode); goto error_out; } - sb->s_maxbytes = MAX_LFS_FILESIZE; + sb->s_maxbytes = 1<<30; return 0; error_out: diff --git a/fs/udf/truncate.c b/fs/udf/truncate.c index e1b0e8cfecb4..0abd66ce36ea 100644 --- a/fs/udf/truncate.c +++ b/fs/udf/truncate.c @@ -239,37 +239,51 @@ void udf_truncate_extents(struct inode * inode) { if (offset) { - extoffset -= adsize; - etype = udf_next_aext(inode, &bloc, &extoffset, &eloc, &elen, &bh, 1); - if (etype == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) - { - extoffset -= adsize; - elen = EXT_NOT_RECORDED_NOT_ALLOCATED | (elen + offset); - udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 0); + /* + * OK, there is not extent covering inode->i_size and + * no extent above inode->i_size => truncate is + * extending the file by 'offset'. + */ + if ((!bh && extoffset == udf_file_entry_alloc_offset(inode)) || + (bh && extoffset == sizeof(struct allocExtDesc))) { + /* File has no extents at all! */ + memset(&eloc, 0x00, sizeof(kernel_lb_addr)); + elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset; + udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1); } - else if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30)) - { - kernel_lb_addr neloc = { 0, 0 }; + else { extoffset -= adsize; - nelen = EXT_NOT_RECORDED_NOT_ALLOCATED | - ((elen + offset + inode->i_sb->s_blocksize - 1) & - ~(inode->i_sb->s_blocksize - 1)); - udf_write_aext(inode, bloc, &extoffset, neloc, nelen, bh, 1); - udf_add_aext(inode, &bloc, &extoffset, eloc, (etype << 30) | elen, &bh, 1); - } - else - { - if (elen & (inode->i_sb->s_blocksize - 1)) + etype = udf_next_aext(inode, &bloc, &extoffset, &eloc, &elen, &bh, 1); + if (etype == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) + { + extoffset -= adsize; + elen = EXT_NOT_RECORDED_NOT_ALLOCATED | (elen + offset); + udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 0); + } + else if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30)) { + kernel_lb_addr neloc = { 0, 0 }; extoffset -= adsize; - elen = EXT_RECORDED_ALLOCATED | - ((elen + inode->i_sb->s_blocksize - 1) & + nelen = EXT_NOT_RECORDED_NOT_ALLOCATED | + ((elen + offset + inode->i_sb->s_blocksize - 1) & ~(inode->i_sb->s_blocksize - 1)); - udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 1); + udf_write_aext(inode, bloc, &extoffset, neloc, nelen, bh, 1); + udf_add_aext(inode, &bloc, &extoffset, eloc, (etype << 30) | elen, &bh, 1); + } + else + { + if (elen & (inode->i_sb->s_blocksize - 1)) + { + extoffset -= adsize; + elen = EXT_RECORDED_ALLOCATED | + ((elen + inode->i_sb->s_blocksize - 1) & + ~(inode->i_sb->s_blocksize - 1)); + udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 1); + } + memset(&eloc, 0x00, sizeof(kernel_lb_addr)); + elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset; + udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1); } - memset(&eloc, 0x00, sizeof(kernel_lb_addr)); - elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset; - udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1); } } } -- cgit v1.2.2 From 2d8f613160ed303f5fe310f21bba334a4b074fa5 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 22 Aug 2006 21:22:13 +0400 Subject: elv_unregister: fix possible crash on module unload An exiting task or process which didn't do I/O yet have no io context, elv_unregister() should check it is not NULL. Signed-off-by: Oleg Nesterov Acked-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- block/elevator.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/block/elevator.c b/block/elevator.c index bc7baeec0d10..9b72dc7c8a5c 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -765,7 +765,8 @@ void elv_unregister(struct elevator_type *e) read_lock(&tasklist_lock); do_each_thread(g, p) { task_lock(p); - e->ops.trim(p->io_context); + if (p->io_context) + e->ops.trim(p->io_context); task_unlock(p); } while_each_thread(g, p); read_unlock(&tasklist_lock); -- cgit v1.2.2 From e0b7cde9975e17a61b4511c7822803dfb7210011 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 21 Aug 2006 15:31:08 -0700 Subject: [NETFILTER]: arp_tables: fix table locking in arpt_do_table table->private might change because of ruleset changes, don't use it without holding the lock. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv4/netfilter/arp_tables.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index df4854cf598b..8d1d7a6e72a5 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -236,7 +236,7 @@ unsigned int arpt_do_table(struct sk_buff **pskb, struct arpt_entry *e, *back; const char *indev, *outdev; void *table_base; - struct xt_table_info *private = table->private; + struct xt_table_info *private; /* ARP header, plus 2 device addresses, plus 2 IP addresses. */ if (!pskb_may_pull((*pskb), (sizeof(struct arphdr) + @@ -248,6 +248,7 @@ unsigned int arpt_do_table(struct sk_buff **pskb, outdev = out ? out->name : nulldevname; read_lock_bh(&table->lock); + private = table->private; table_base = (void *)private->entries[smp_processor_id()]; e = get_entry(table_base, private->hook_entry[hook]); back = get_entry(table_base, private->underflow[hook]); -- cgit v1.2.2 From 316c1592bea94ead75301cb764523661fbbcc1ca Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 22 Aug 2006 00:06:11 -0700 Subject: [TCP]: Limit window scaling if window is clamped. This small change allows for easy per-route workarounds for broken hosts or middleboxes that are not compliant with TCP standards for window scaling. Rather than having to turn off window scaling globally. This patch allows reducing or disabling window scaling if window clamp is present. Example: Mark Lord reported a problem with 2.6.17 kernel being unable to access http://www.everymac.com # ip route add 216.145.246.23/32 via 10.8.0.1 window 65535 Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 507adefbc17c..b4f3ffe1b3b4 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -201,6 +201,7 @@ void tcp_select_initial_window(int __space, __u32 mss, * See RFC1323 for an explanation of the limit to 14 */ space = max_t(u32, sysctl_tcp_rmem[2], sysctl_rmem_max); + space = min_t(u32, space, *window_clamp); while (space > 65535 && (*rcv_wscale) < 14) { space >>= 1; (*rcv_wscale)++; -- cgit v1.2.2 From 3ffaa8c7c0f884171a273cd2145b8fbbf233ba22 Mon Sep 17 00:00:00 2001 From: Michael Rash Date: Tue, 22 Aug 2006 00:45:22 -0700 Subject: [TEXTSEARCH]: Fix Boyer Moore initialization bug The pattern is set after trying to compute the prefix table, which tries to use it. Initialize it before calling compute_prefix_tbl, make compute_prefix_tbl consistently use only the data from struct ts_bm and remove the now unnecessary arguments. Signed-off-by: Michael Rash Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- lib/ts_bm.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/lib/ts_bm.c b/lib/ts_bm.c index 0110e4414805..d90822c378a4 100644 --- a/lib/ts_bm.c +++ b/lib/ts_bm.c @@ -111,15 +111,14 @@ static int subpattern(u8 *pattern, int i, int j, int g) return ret; } -static void compute_prefix_tbl(struct ts_bm *bm, const u8 *pattern, - unsigned int len) +static void compute_prefix_tbl(struct ts_bm *bm) { int i, j, g; for (i = 0; i < ASIZE; i++) - bm->bad_shift[i] = len; - for (i = 0; i < len - 1; i++) - bm->bad_shift[pattern[i]] = len - 1 - i; + bm->bad_shift[i] = bm->patlen; + for (i = 0; i < bm->patlen - 1; i++) + bm->bad_shift[bm->pattern[i]] = bm->patlen - 1 - i; /* Compute the good shift array, used to match reocurrences * of a subpattern */ @@ -150,8 +149,8 @@ static struct ts_config *bm_init(const void *pattern, unsigned int len, bm = ts_config_priv(conf); bm->patlen = len; bm->pattern = (u8 *) bm->good_shift + prefix_tbl_len; - compute_prefix_tbl(bm, pattern, len); memcpy(bm->pattern, pattern, len); + compute_prefix_tbl(bm); return conf; } -- cgit v1.2.2 From c46f4774228e4dbf716b713e91ad20db50f629ef Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 21 Aug 2006 15:27:16 -0700 Subject: [SPARC64]: Fix pfn_pte() build failure. The "%uhi" needs to be "%%uhi" because we want a real "%" character in the assembler here, instead of an assembler variable expansion. Aparently older GCCs were more liberal and interpreted this %-letter as a literal "%" for whatever reason. Based upon a build failure report from Meelis Roos. Signed-off-by: David S. Miller --- include/asm-sparc64/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h index 1ba19eb34ce3..ebfe395cfb87 100644 --- a/include/asm-sparc64/pgtable.h +++ b/include/asm-sparc64/pgtable.h @@ -234,7 +234,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot) sz_bits = 0UL; if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) { __asm__ __volatile__( - "\n661: sethi %uhi(%1), %0\n" + "\n661: sethi %%uhi(%1), %0\n" " sllx %0, 32, %0\n" " .section .sun4v_2insn_patch, \"ax\"\n" " .word 661b\n" -- cgit v1.2.2 From 8ea371fb6df5a6e8056265e0089fd578e87797fc Mon Sep 17 00:00:00 2001 From: Florin Malita Date: Wed, 23 Aug 2006 00:45:33 -0400 Subject: Input: atkbd - fix overrun in atkbd_set_repeat_rate() This was introduced in commit 3d0f0fa0cb554541e10cb8cb84104e4b10828468: bounds checking is performed against period[32] while indexing delay[4]. Spotted by Coverity, CID 1376. Signed-off-by: Florin Malita Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 6bfa0cf4b1d2..a86afd0a5ef1 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -498,7 +498,7 @@ static int atkbd_set_repeat_rate(struct atkbd *atkbd) i++; dev->rep[REP_PERIOD] = period[i]; - while (j < ARRAY_SIZE(period) - 1 && delay[j] < dev->rep[REP_DELAY]) + while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY]) j++; dev->rep[REP_DELAY] = delay[j]; -- cgit v1.2.2 From 72a623be00fa3d77724c1b0cac07c1bac60e70a5 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 23 Aug 2006 00:47:39 -0400 Subject: Input: wistron - fix crash due to referencing __initdata Remove __initdata markings from keymaps as they are used during normal driver operations. Signed-off-by: Dmitry Torokhov --- drivers/input/misc/wistron_btns.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index a8efc1af36cb..de0f46dd9692 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -259,11 +259,11 @@ static int __init dmi_matched(struct dmi_system_id *dmi) return 1; } -static struct key_entry keymap_empty[] __initdata = { +static struct key_entry keymap_empty[] = { { KE_END, 0 } }; -static struct key_entry keymap_fs_amilo_pro_v2000[] __initdata = { +static struct key_entry keymap_fs_amilo_pro_v2000[] = { { KE_KEY, 0x01, KEY_HELP }, { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, @@ -273,7 +273,7 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_fujitsu_n3510[] __initdata = { +static struct key_entry keymap_fujitsu_n3510[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, { KE_KEY, 0x36, KEY_WWW }, @@ -285,7 +285,7 @@ static struct key_entry keymap_fujitsu_n3510[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_wistron_ms2111[] __initdata = { +static struct key_entry keymap_wistron_ms2111[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, { KE_KEY, 0x13, KEY_PROG3 }, @@ -294,7 +294,7 @@ static struct key_entry keymap_wistron_ms2111[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_wistron_ms2141[] __initdata = { +static struct key_entry keymap_wistron_ms2141[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, { KE_WIFI, 0x30, 0 }, @@ -307,7 +307,7 @@ static struct key_entry keymap_wistron_ms2141[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_acer_aspire_1500[] __initdata = { +static struct key_entry keymap_acer_aspire_1500[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, { KE_WIFI, 0x30, 0 }, @@ -317,7 +317,7 @@ static struct key_entry keymap_acer_aspire_1500[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_acer_travelmate_240[] __initdata = { +static struct key_entry keymap_acer_travelmate_240[] = { { KE_KEY, 0x31, KEY_MAIL }, { KE_KEY, 0x36, KEY_WWW }, { KE_KEY, 0x11, KEY_PROG1 }, @@ -327,7 +327,7 @@ static struct key_entry keymap_acer_travelmate_240[] __initdata = { { KE_END, 0 } }; -static struct key_entry keymap_aopen_1559as[] __initdata = { +static struct key_entry keymap_aopen_1559as[] = { { KE_KEY, 0x01, KEY_HELP }, { KE_KEY, 0x06, KEY_PROG3 }, { KE_KEY, 0x11, KEY_PROG1 }, -- cgit v1.2.2 From 90414be9523208f0b667fd58c22e26b8db0594de Mon Sep 17 00:00:00 2001 From: Pozsar Balazs Date: Wed, 23 Aug 2006 00:48:03 -0400 Subject: Input: psmouse - fix Intellimouse 4.0 initialization Revert the superfluous initilization causing some mice become jumpy. Signed-off-by: Pozsar Balazs Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 8bc9f51ae6c2..343afa38f4c2 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -485,13 +485,6 @@ static int im_explorer_detect(struct psmouse *psmouse, int set_properties) param[0] = 40; ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); - param[0] = 200; - ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); - param[0] = 200; - ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); - param[0] = 60; - ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); - if (set_properties) { set_bit(BTN_MIDDLE, psmouse->dev->keybit); set_bit(REL_WHEEL, psmouse->dev->relbit); -- cgit v1.2.2 From c712a9de94a5df5bc0087c14ad0b1aac2c147991 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 23 Aug 2006 00:48:33 -0400 Subject: Input: remove dead URLs from Doclumentation/input/joystick.txt Closes #2804. Signed-off-by: Alexey Dobriyan Signed-off-by: Dmitry Torokhov --- Documentation/input/joystick.txt | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt index d53b857a3710..841c353297e6 100644 --- a/Documentation/input/joystick.txt +++ b/Documentation/input/joystick.txt @@ -39,7 +39,6 @@ them. Bug reports and success stories are also welcome. The input project website is at: - http://www.suse.cz/development/input/ http://atrey.karlin.mff.cuni.cz/~vojtech/input/ There is also a mailing list for the driver at: -- cgit v1.2.2 From 4c86cd9c59428a40233fb707f5de18caa5ab5cb7 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 18 Aug 2006 18:03:08 -0500 Subject: [POWERPC] Fix interrupts on 8540 ADS board * Fixed 8540 ADS support for the new irq layer * Fixed 8540 ADS support for mapping PCI interrupts * Updated 8540 ADS to use device tree for interrupt assignment and sense values Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 162 ++++++++++-------------------- 1 file changed, 55 insertions(+), 107 deletions(-) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 06a497676c99..9d2acfbbeccd 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -37,79 +37,7 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ - -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * This is little evil, but works around the fact - * that revA boards have IDSEL starting at 18 - * and others boards (older) start at 12 - * - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ - }; - - const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - int mpc85xx_exclude_device(u_char bus, u_char devfn) { @@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } +void __init +mpc85xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} #endif /* CONFIG_PCI */ void __init mpc85xx_ads_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; - - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; - - mpic1 = mpic_alloc(OpenPIC_PAddr, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_ads_openpic_initsenses, - sizeof(mpc85xx_ads_openpic_initsenses), - " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - mpic_init(mpic1); + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if(of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Could not map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Unused on this platform (leave room for 8548) */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); } /* @@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void) static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; +#ifdef CONFIG_PCI struct device_node *np; +#endif if (ppc_md.progress) ppc_md.progress("mpc85xx_ads_setup_arch()", 0); @@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif -- cgit v1.2.2 From ddd64159eb0d090766eee79b191a974ffdd83a42 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 17 Aug 2006 20:24:48 -0500 Subject: [POWERPC] Fix CDS IRQ handling and PCI code * Fix IRQ support in the 85xx CDS boards so it uses the new generic stuff * Fix PCI IRQ mapping to use the device tree * Disabled i8259 support to allow the CDS to boot. This will be fixed soon, but the current code doesn't even compile, so this is a vast improvement Signed-off-by: Andy Fleming Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/85xx/Kconfig | 1 - arch/powerpc/platforms/85xx/mpc85xx_cds.c | 210 +++++++++++++----------------- 2 files changed, 88 insertions(+), 123 deletions(-) diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 454fc53289ab..c3268d9877e4 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -14,7 +14,6 @@ config MPC8540_ADS config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE - select PPC_I8259 if PCI help This option enables support for the MPC85xx CDS board diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 18e6e11f7020..1d357d32a29f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */ -#else - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ -#ifdef CONFIG_PCI - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */ -#else - 0x0, /* External 11: */ -#endif -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - - if (!hose->index) - { - /* Handle PCI1 interrupts */ - char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - - /* Note IRQ assignment for slots is based on which slot the elysium is - * in -- in this setup elysium is in slot #2 (this PIRQA as first - * interrupt on slot */ - { - { 0, 1, 2, 3 }, /* 16 - PMC */ - { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ - { 0, 1, 2, 3 }, /* 18 - Slot 1 */ - { 1, 2, 3, 0 }, /* 19 - Slot 2 */ - { 2, 3, 0, 1 }, /* 20 - Slot 3 */ - { 3, 0, 1, 2 }, /* 21 - Slot 4 */ - }; - - const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; - int i, j; - - for (i = 0; i < 6; i++) - for (j = 0; j < 4; j++) - pci_irq_table[i][j] = - ((pci_irq_table[i][j] + 5 - - cds_pci_slot) & 0x3) + PIRQ0A; - - return PCI_IRQ_TABLE_LOOKUP; - } else { - /* Handle PCI2 interrupts (if we have one) */ - char pci_irq_table[][4] = - { - /* - * We only have one slot and one interrupt - * going to PIRQA - PIRQD */ - { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ - }; - - const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; - - return PCI_IRQ_TABLE_LOOKUP; - } -} #define ARCADIA_HOST_BRIDGE_IDSEL 17 #define ARCADIA_2ND_BRIDGE_IDSEL 3 @@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); pci_dev_put(dev); } + + /* Now map all the PCI irqs */ + dev = NULL; + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + +#ifdef CONFIG_PPC_I8259 +#warning The i8259 PIC support is currently broken +static void mpc85xx_8259_cascade(unsigned int irq, struct + irq_desc *desc, struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + + desc->chip->eoi(irq); } +#endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ void __init mpc85xx_cds_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + struct device_node *cascade_node = NULL; + int cascade_irq; - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } - mpic1 = mpic_alloc(OpenPIC_PAddr, + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_cds_openpic_initsenses, - sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - - mpic_init(mpic1); + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + + /* Return the mpic node */ + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Used only for 8548 so far, but no harm in + * allocating them for everyone */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + +#ifdef CONFIG_PPC_I8259 + /* Initialize the i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_DEBUG "Could not find i8259 PIC\n"); + return; + } -#ifdef CONFIG_PCI - mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "Failed to map cascade interrupt\n"); + return; + } - i8259_init(0,0); -#endif + i8259_init(cascade_node, 0); + of_node_put(cascade_node); + + set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade); +#endif /* CONFIG_PPC_I8259 */ } @@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void) add_bridge(np); ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif -- cgit v1.2.2 From 2654d6385f6cad00cfb8f5087aeb10d0ed781e74 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 18 Aug 2006 18:04:34 -0500 Subject: [POWERPC] Add 85xx DTS files to powerpc Added the mpc85xx family of dts files to the powerpc tree Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8540ads.dts | 257 +++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8541cds.dts | 244 +++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8548cds.dts | 287 +++++++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8555cds.dts | 244 +++++++++++++++++++++++++++++ 4 files changed, 1032 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8540ads.dts create mode 100644 arch/powerpc/boot/dts/mpc8541cds.dts create mode 100644 arch/powerpc/boot/dts/mpc8548cds.dts create mode 100644 arch/powerpc/boot/dts/mpc8555cds.dts diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts new file mode 100644 index 000000000000..93d2c2de6566 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -0,0 +1,257 @@ +/* + * MPC8540 ADS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8540ADS"; + compatible = "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8540@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 E0 0C 00 73 00 ]; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 E0 0C 00 73 01 ]; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + address = [ 00 E0 0C 00 73 02 ]; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <19 2>; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x02 */ + 1000 0 0 1 40000 31 1 + 1000 0 0 2 40000 32 1 + 1000 0 0 3 40000 33 1 + 1000 0 0 4 40000 34 1 + + /* IDSEL 0x03 */ + 1800 0 0 1 40000 34 1 + 1800 0 0 2 40000 31 1 + 1800 0 0 3 40000 32 1 + 1800 0 0 4 40000 33 1 + + /* IDSEL 0x04 */ + 2000 0 0 1 40000 33 1 + 2000 0 0 2 40000 34 1 + 2000 0 0 3 40000 31 1 + 2000 0 0 4 40000 32 1 + + /* IDSEL 0x05 */ + 2800 0 0 1 40000 32 1 + 2800 0 0 2 40000 33 1 + 2800 0 0 3 40000 34 1 + 2800 0 0 4 40000 31 1 + + /* IDSEL 0x0c */ + 6000 0 0 1 40000 31 1 + 6000 0 0 2 40000 32 1 + 6000 0 0 3 40000 33 1 + 6000 0 0 4 40000 34 1 + + /* IDSEL 0x0d */ + 6800 0 0 1 40000 34 1 + 6800 0 0 2 40000 31 1 + 6800 0 0 3 40000 32 1 + 6800 0 0 4 40000 33 1 + + /* IDSEL 0x0e */ + 7000 0 0 1 40000 33 1 + 7000 0 0 2 40000 34 1 + 7000 0 0 3 40000 31 1 + 7000 0 0 4 40000 32 1 + + /* IDSEL 0x0f */ + 7800 0 0 1 40000 32 1 + 7800 0 0 2 40000 33 1 + 7800 0 0 3 40000 34 1 + 7800 0 0 4 40000 31 1 + + /* IDSEL 0x12 */ + 9000 0 0 1 40000 31 1 + 9000 0 0 2 40000 32 1 + 9000 0 0 3 40000 33 1 + 9000 0 0 4 40000 34 1 + + /* IDSEL 0x13 */ + 9800 0 0 1 40000 34 1 + 9800 0 0 2 40000 31 1 + 9800 0 0 3 40000 32 1 + 9800 0 0 4 40000 33 1 + + /* IDSEL 0x14 */ + a000 0 0 1 40000 33 1 + a000 0 0 2 40000 34 1 + a000 0 0 3 40000 31 1 + a000 0 0 4 40000 32 1 + + /* IDSEL 0x15 */ + a800 0 0 1 40000 32 1 + a800 0 0 2 40000 33 1 + a800 0 0 3 40000 34 1 + a800 0 0 4 40000 31 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts new file mode 100644 index 000000000000..7be0bc659e1c --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8541 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8541CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8541@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts new file mode 100644 index 000000000000..893d7957c174 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -0,0 +1,287 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8548CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + +/* eTSEC 4 is currently broken + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + local-mac-address = [ 00 E0 0C 00 73 03 ]; + interrupts = <15 2 16 2 17 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + */ + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts new file mode 100644 index 000000000000..118f5a887651 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8555CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <0d 2 0e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; -- cgit v1.2.2 From 343832734fac000d2d276ccc41955daded1265f5 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Fri, 18 Aug 2006 14:30:35 -0500 Subject: [POWERPC] Rewrite the PPC 86xx IRQ handling to use Flat Device Tree IRQ setup now comes from the Flat Device Tree and use the new generic IRQ code. Fixed the fsl_soc.c IRQ OF interrupt node parsing. Removed some unused MPC86xx macro definition. Signed-off-by: Zhang Wei Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras (cherry picked from 919fede6edab94cccb3ca8c1c0b32fa62c9369a5 commit) --- arch/powerpc/platforms/86xx/mpc8641_hpcn.h | 32 --- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 324 ++++++++++++++++------------- arch/powerpc/sysdev/fsl_soc.c | 30 ++- 3 files changed, 188 insertions(+), 198 deletions(-) diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h index 5d2bcf78cef7..41e554c4af94 100644 --- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -16,38 +16,6 @@ #include -/* PCI interrupt controller */ -#define PIRQA 3 -#define PIRQB 4 -#define PIRQC 5 -#define PIRQD 6 -#define PIRQ7 7 -#define PIRQE 9 -#define PIRQF 10 -#define PIRQG 11 -#define PIRQH 12 - -/* PCI-Express memory map */ -#define MPC86XX_PCIE_LOWER_IO 0x00000000 -#define MPC86XX_PCIE_UPPER_IO 0x00ffffff - -#define MPC86XX_PCIE_LOWER_MEM 0x80000000 -#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff - -#define MPC86XX_PCIE_IO_BASE 0xe2000000 -#define MPC86XX_PCIE_MEM_OFFSET 0x00000000 - -#define MPC86XX_PCIE_IO_SIZE 0x01000000 - -#define PCIE1_CFG_ADDR_OFFSET (0x8000) -#define PCIE1_CFG_DATA_OFFSET (0x8004) - -#define PCIE2_CFG_ADDR_OFFSET (0x9000) -#define PCIE2_CFG_DATA_OFFSET (0x9004) - -#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET -#define MPC86xx_PCIE_SIZE (0x1000) - #define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ #endif /* __MPC8641_HPCN_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index ebae73eb0063..146da3001c67 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -37,6 +37,14 @@ #include "mpc86xx.h" #include "mpc8641_hpcn.h" +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - */ - -static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */ - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */ - 0x0, /* External 11: */ - 0x0, - 0x0, - 0x0, - 0x0, -}; - +static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); +} void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; + struct device_node *np, *cascade_node = NULL; + int cascade_irq; phys_addr_t openpic_paddr; + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + /* Determine the Physical Address of the OpenPIC regs */ openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; /* Alloc mpic structure and per isu has 16 INT entries. */ - mpic1 = mpic_alloc(openpic_paddr, + mpic1 = mpic_alloc(np, openpic_paddr, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc86xx_hpcn_openpic_initsenses, - sizeof(mpc86xx_hpcn_openpic_initsenses), + 16, NR_IRQS - 4, " MPIC "); BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000); + /* 48 Internal Interrupts */ - mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); - mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); - mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); + mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200); + mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400); + mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600); - /* 16 External interrupts */ - mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); + /* 16 External interrupts + * Moving them from [0 - 15] to [64 - 79] + */ + mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000); mpic_init(mpic1); #ifdef CONFIG_PCI - mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); - i8259_init(0, I8259_OFFSET); -#endif -} + /* Initialize i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + if (cascade_node == NULL) { + printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n"); + return; + } + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt"); + return; + } + DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq); + i8259_init(cascade_node, 0); + set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade); +#endif +} #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; +const unsigned char uli1575_irq_route_table[16] = { + 0, /* 0: Reserved */ + 0x8, /* 1: 0b1000 */ + 0, /* 2: Reserved */ + 0x2, /* 3: 0b0010 */ + 0x4, /* 4: 0b0100 */ + 0x5, /* 5: 0b0101 */ + 0x7, /* 6: 0b0111 */ + 0x6, /* 7: 0b0110 */ + 0, /* 8: Reserved */ + 0x1, /* 9: 0b0001 */ + 0x3, /* 10: 0b0011 */ + 0x9, /* 11: 0b1001 */ + 0xb, /* 12: 0b1011 */ + 0, /* 13: Reserved */ + 0xd, /* 14, 0b1101 */ + 0xf, /* 15, 0b1111 */ +}; + +static int __devinit +get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) { - static char pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ - {0, 0, 0, 0}, /* IDSEL 19 */ - {0, 0, 0, 0}, /* IDSEL 20 */ - {0, 0, 0, 0}, /* IDSEL 21 */ - {0, 0, 0, 0}, /* IDSEL 22 */ - {0, 0, 0, 0}, /* IDSEL 23 */ - {0, 0, 0, 0}, /* IDSEL 24 */ - {0, 0, 0, 0}, /* IDSEL 25 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/ - {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */ - {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */ - {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */ - {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/ - {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */ - }; - - const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; + struct of_irq oirq; + u32 laddr[3]; + struct device_node *hosenode = hose ? hose->arch_data : NULL; + + if (!hosenode) return -EINVAL; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, laddr, &oirq); + DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", + laddr[0], slot, pin, oirq.specifier[0]); + return oirq.specifier[0]; } -static void __devinit quirk_ali1575(struct pci_dev *dev) +static void __devinit quirk_uli1575(struct pci_dev *dev) { unsigned short temp; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned char irq2pin[16]; + unsigned long pirq_map_word = 0; + u32 irq; + int i; /* - * ALI1575 interrupts route table setup: + * ULI1575 interrupts route setup + */ + memset(irq2pin, 0, 16); /* Initialize default value 0 */ + + /* + * PIRQA -> PIRQD mapping read from OF-tree + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + for (i = 0; i < 4; i++){ + irq = get_pci_irq_from_of(hose, 17, i + 1); + if (irq > 0 && irq < 16) + irq2pin[irq] = PIRQA + i; + else + printk(KERN_WARNING "ULI1575 device" + "(slot %d, pin %d) irq %d is invalid.\n", + 17, i, irq); + } + + /* + * PIRQE -> PIRQF mapping set manually * * IRQ pin IRQ# - * PIRQA ---- 3 - * PIRQB ---- 4 - * PIRQC ---- 5 - * PIRQD ---- 6 * PIRQE ---- 9 * PIRQF ---- 10 * PIRQG ---- 11 * PIRQH ---- 12 - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA */ - pci_write_config_dword(dev, 0x48, 0xb9317542); + for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; + + /* Set IRQ-PIRQ Mapping to ULI1575 */ + for (i = 0; i < 16; i++) + if (irq2pin[i]) + pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) + << ((irq2pin[i] - PIRQA) * 4); - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x86, 0x0c); + /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ + DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", + pirq_map_word); + pci_write_config_dword(dev, 0x48, pirq_map_word); - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x87, 0x0d); +#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ + do { \ + int irq; \ + irq = get_pci_irq_from_of(hose, slot, pin); \ + if (irq > 0 && irq < 16) \ + pci_write_config_byte(dev, reg, irq2pin[irq]); \ + else \ + printk(KERN_WARNING "ULI1575 device" \ + "(slot %d, pin %d) irq %d is invalid.\n", \ + slot, pin, irq); \ + } while(0) - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ - pci_write_config_byte(dev, 0x88, 0x0f); + /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ + ULI1575_SET_DEV_IRQ(28, 1, 0x86); - /* USB 2.0 controller, interrupt: PIRQ7 */ - pci_write_config_byte(dev, 0x74, 0x06); + /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ + ULI1575_SET_DEV_IRQ(28, 2, 0x87); - /* Audio controller, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x8a, 0x0c); + /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ + ULI1575_SET_DEV_IRQ(28, 3, 0x88); - /* Modem controller, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x8b, 0x0d); + /* USB 2.0 controller, slot 28, pin 4 */ + irq = get_pci_irq_from_of(hose, 28, 4); + if (irq >= 0 && irq <=15) + pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - /* HD audio controller, interrupt: PIRQG */ - pci_write_config_byte(dev, 0x8c, 0x0e); + /* Audio controller, slot 29, pin 1 */ + ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - /* Serial ATA interrupt: PIRQD */ - pci_write_config_byte(dev, 0x8d, 0x0b); + /* Modem controller, slot 29, pin 2 */ + ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - /* SMB interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8e, 0x0f); + /* HD audio controller, slot 29, pin 3 */ + ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - /* PMU ACPI SCI interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8f, 0x0f); + /* SMB interrupt: slot 30, pin 1 */ + ULI1575_SET_DEV_IRQ(30, 1, 0x8e); + + /* PMU ACPI SCI interrupt: slot 30, pin 2 */ + ULI1575_SET_DEV_IRQ(30, 2, 0x8f); + + /* Serial ATA interrupt: slot 31, pin 1 */ + ULI1575_SET_DEV_IRQ(31, 1, 0x8d); /* Primary PATA IDE IRQ: 14 * Secondary PATA IDE IRQ: 15 */ - pci_write_config_byte(dev, 0x44, 0x3d); - pci_write_config_byte(dev, 0x75, 0x0f); + pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); + pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); /* Set IRQ14 and IRQ15 to legacy IRQs */ pci_read_config_word(dev, 0x46, &temp); @@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev) */ outb(0xfa, 0x4d0); outb(0x1e, 0x4d1); + +#undef ULI1575_SET_DEV_IRQ } static void __devinit quirk_uli5288(struct pci_dev *dev) @@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev) dev->class |= 0x1; } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); @@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc86xx_map_irq; ppc_md.pci_exclude_device = mpc86xx_exclude_device; #endif @@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) } +void __init mpc86xx_hpcn_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + + /* * Called very early, device-tree isn't unflattened */ @@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) { .setup_arch = mpc86xx_hpcn_setup_arch, .init_IRQ = mpc86xx_hpcn_init_irq, .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, + .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup, .get_irq = mpic_get_irq, .restart = mpc86xx_restart, .time_init = mpc86xx_time_init, diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 12b65609c072..ef10bcf2d943 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void) mdio_data.irq[k] = -1; while ((child = of_get_next_child(np, child)) != NULL) { - if (child->n_intrs) { - u32 *id = - (u32 *) get_property(child, "reg", NULL); - mdio_data.irq[*id] = child->intrs[0].line; - } + u32 *id = get_property(child, "reg", NULL); + mdio_data.irq[*id] = irq_of_parse_and_map(child, 0); } ret = @@ -131,6 +128,7 @@ static int __init gfar_of_init(void) char *model; void *mac_addr; phandle *ph; + int n_res = 1; memset(r, 0, sizeof(r)); memset(&gfar_data, 0, sizeof(gfar_data)); @@ -139,8 +137,7 @@ static int __init gfar_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; model = get_property(np, "model", NULL); @@ -150,19 +147,19 @@ static int __init gfar_of_init(void) r[1].name = gfar_tx_intr; r[2].name = gfar_rx_intr; - r[2].start = np->intrs[1].line; - r[2].end = np->intrs[1].line; + r[2].start = r[2].end = irq_of_parse_and_map(np, 1); r[2].flags = IORESOURCE_IRQ; r[3].name = gfar_err_intr; - r[3].start = np->intrs[2].line; - r[3].end = np->intrs[2].line; + r[3].start = r[3].end = irq_of_parse_and_map(np, 2); r[3].flags = IORESOURCE_IRQ; + + n_res += 2; } gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], - np->n_intrs + 1); + n_res + 1); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); @@ -259,8 +256,7 @@ static int __init fsl_i2c_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); @@ -396,8 +392,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_mph = @@ -445,8 +440,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto unreg_mph; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_dr = -- cgit v1.2.2 From aa74a30be971c632d734e487df42278b1cf85151 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Mon, 21 Aug 2006 14:29:28 -0500 Subject: [POWERPC] Fix FEC node in 8540 ADS dts * Fixed the FEC node, and its accompanying PHY * Fixed a spacing issue in the PIC node Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8540ads.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 93d2c2de6566..5f41c1f7a5f3 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -83,11 +83,11 @@ reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@2 { - linux,phandle = <2452002>; + ethernet-phy@3 { + linux,phandle = <2452003>; interrupt-parent = <40000>; interrupts = <37 1>; - reg = <2>; + reg = <3>; device_type = "ethernet-phy"; }; }; @@ -124,14 +124,14 @@ #address-cells = <1>; #size-cells = <0>; device_type = "network"; - model = "TSEC"; + model = "FEC"; compatible = "gianfar"; reg = <26000 1000>; address = [ 00 E0 0C 00 73 02 ]; local-mac-address = [ 00 E0 0C 00 73 02 ]; interrupts = <19 2>; interrupt-parent = <40000>; - phy-handle = <2452002>; + phy-handle = <2452003>; }; serial@4500 { @@ -251,7 +251,7 @@ built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; - big-endian; + big-endian; }; }; }; -- cgit v1.2.2 From 5db9fa9593e2ff69f2b95f9d59229dc4faaa564d Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Tue, 22 Aug 2006 20:36:05 -0500 Subject: [POWERPC] Fix gettimeofday inaccuracies There are two problems in the powerpc gettimeofday code which can cause incorrect results to be returned. The first is that there is a race between do_gettimeofday and the timer interrupt: 1. do_gettimeofday does get_tb() 2. decrementer exception on boot cpu which runs timer_recalc_offset, which also samples the timebase and updates the do_gtod structure with a greater timebase value. 3. do_gettimeofday calls __do_gettimeofday, which leads to the negative result from tb_val - temp_varp->tb_orig_stamp. The second is caused by taking the boot cpu offline, which can cause the value of tb_last_jiffy to be increased past the currently available timebase, causing the same underflow as above. [paulus@samba.org - define and use data_barrier() instead of mb().] Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/time.c | 25 +++++++++++++++++-------- include/asm-powerpc/system.h | 9 +++++++++ 2 files changed, 26 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 774c0a3c5019..18e59e43d2b3 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -417,7 +417,7 @@ static __inline__ void timer_check_rtc(void) /* * This version of gettimeofday has microsecond resolution. */ -static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) +static inline void __do_gettimeofday(struct timeval *tv) { unsigned long sec, usec; u64 tb_ticks, xsec; @@ -431,7 +431,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) * without a divide (and in fact, without a multiply) */ temp_varp = do_gtod.varp; - tb_ticks = tb_val - temp_varp->tb_orig_stamp; + + /* Sampling the time base must be done after loading + * do_gtod.varp in order to avoid racing with update_gtod. + */ + data_barrier(temp_varp); + tb_ticks = get_tb() - temp_varp->tb_orig_stamp; temp_tb_to_xs = temp_varp->tb_to_xs; temp_stamp_xsec = temp_varp->stamp_xsec; xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs); @@ -464,7 +469,7 @@ void do_gettimeofday(struct timeval *tv) tv->tv_usec = usec; return; } - __do_gettimeofday(tv, get_tb()); + __do_gettimeofday(tv); } EXPORT_SYMBOL(do_gettimeofday); @@ -650,6 +655,7 @@ void timer_interrupt(struct pt_regs * regs) int next_dec; int cpu = smp_processor_id(); unsigned long ticks; + u64 tb_next_jiffy; #ifdef CONFIG_PPC32 if (atomic_read(&ppc_n_lost_interrupts) != 0) @@ -691,11 +697,14 @@ void timer_interrupt(struct pt_regs * regs) continue; write_seqlock(&xtime_lock); - tb_last_jiffy += tb_ticks_per_jiffy; - tb_last_stamp = per_cpu(last_jiffy, cpu); - do_timer(regs); - timer_recalc_offset(tb_last_jiffy); - timer_check_rtc(); + tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy; + if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) { + tb_last_jiffy = tb_next_jiffy; + tb_last_stamp = per_cpu(last_jiffy, cpu); + do_timer(regs); + timer_recalc_offset(tb_last_jiffy); + timer_check_rtc(); + } write_sequnlock(&xtime_lock); } diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 7307aa775671..4c9f5229e833 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -53,6 +53,15 @@ #define smp_read_barrier_depends() do { } while(0) #endif /* CONFIG_SMP */ +/* + * This is a barrier which prevents following instructions from being + * started until the value of the argument x is known. For example, if + * x is a variable loaded from memory, this prevents following + * instructions from being executed until the load has been performed. + */ +#define data_barrier(x) \ + asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory"); + struct task_struct; struct pt_regs; -- cgit v1.2.2 From 6cdd2bdfb9e2449f1c8a0f729cdf9cfd733dd63f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 23 Aug 2006 11:45:12 +1000 Subject: [POWERPC] Fix BootX booting with an initrd The bootx_init.c trampoline didn't properly add the ramdisk to the "reserve map" (list of reserved areas of memory), thus causing all sorts of failures when using BootX with an initrd. Also fixes a possible problem if the ramdisk is located before the device-tree passed by BootX. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/bootx_init.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index 6a026c733f6a..9d73d0234c5d 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -411,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start) DBG("End of boot params: %x\n", mem_end); rsvmap[0] = mem_start; rsvmap[1] = mem_end; - rsvmap[2] = 0; - rsvmap[3] = 0; + if (bootx_info->ramDisk) { + rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk; + rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize; + rsvmap[4] = 0; + rsvmap[5] = 0; + } else { + rsvmap[2] = 0; + rsvmap[3] = 0; + } return (unsigned long)hdr; } @@ -543,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4) */ if (bi->version < 5) { space = bi->deviceTreeOffset + bi->deviceTreeSize; - if (bi->ramDisk) + if (bi->ramDisk >= space) space = bi->ramDisk + bi->ramDiskSize; } else space = bi->totalParamsSize; - bootx_printf("Total space used by parameters & ramdisk: %x \n", space); + bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space); /* New BootX will have flushed all TLBs and enters kernel with * MMU switched OFF, so this should not be useful anymore. -- cgit v1.2.2 From c4342ff92bed26f2e0e3543a9f0fdc5f3a29b8fd Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Wed, 23 Aug 2006 10:19:50 +0800 Subject: [POWERPC] Update mpc7448hpc2 board irq support using device tree The patch rewrites mpc7448hpc2 board irq support according to the new mpic device tree interface. Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 73 +++++-------- arch/powerpc/sysdev/tsi108_dev.c | 10 +- arch/powerpc/sysdev/tsi108_pci.c | 21 ++-- include/asm-powerpc/tsi108.h | 14 +-- include/asm-powerpc/tsi108_irq.h | 124 ++++++++++++++++++++++ 5 files changed, 174 insertions(+), 68 deletions(-) create mode 100644 include/asm-powerpc/tsi108_irq.h diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d7a4fc7ca238..ed00ed2455dd 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -1,7 +1,7 @@ /* * mpc7448_hpc2.c * - * Board setup routines for the Freescale Taiga platform + * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan * jacob.pan@freescale.com @@ -12,10 +12,10 @@ * * Copyright 2004-2006 Freescale Semiconductor, Inc. * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ #include @@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; extern int tsi108_setup_pci(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); extern void tsi108_pci_int_init(void); -extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); - -/* - * Define all of the IRQ senses and polarities. Taken from the - * mpc7448hpc manual. - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ - -static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { - /* External on-board sources */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ - /* Internal Tsi108/109 interrupt sources */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ -}; +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs); int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) { @@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; phys_addr_t mpic_paddr = 0; + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; struct device_node *tsi_pic; tsi_pic = of_find_node_by_type(NULL, "open-pic"); @@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void) DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, (u32) mpic_paddr); - mpic = mpic_alloc(mpic_paddr, + mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), 0, /* num_sources used */ - TSI108_IRQ_BASE, 0, /* num_sources used */ - NR_IRQS - 4 /* XXXX */, - mpc7448_hpc2_pic_initsenses, - sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + "Tsi108_PIC"); BUG_ON(mpic == NULL); /* XXXX */ - mpic_init(mpic); - mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == 0) { + printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + set_irq_data(cascade_pci_irq, mpic); + set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + tsi108_pci_int_init(); /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); + of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) @@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 0; } + define_machine(mpc7448_hpc2){ .name = "MPC7448 HPC2", .probe = mpc7448_hpc2_probe, diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 26a0cc820cde..f3038461d4c0 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void) goto err; r[1].name = "tx"; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = irq_of_parse_and_map(np, 0); + r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i, &r[0], - np->n_intrs + 1); + 1); if (IS_ERR(tsi_eth_dev)) { ret = PTR_ERR(tsi_eth_dev); @@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void) tsi_eth_data.regs = r[0].start; tsi_eth_data.phyregs = res.start; tsi_eth_data.phy = *phy_id; - tsi_eth_data.irq_num = np->intrs[0].line; + tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); of_node_put(phy); ret = platform_device_add_data(tsi_eth_dev, &tsi_eth_data, diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 3265d54c82ed..2ab06ed3ae73 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -26,7 +26,6 @@ #include #include - #include #include #include @@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev) (hose)->ops = &tsi108_direct_pci_ops; - printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " "Firmware bus number: %d->%d\n", rsrc.start, hose->first_busno, hose->last_busno); @@ -278,7 +277,7 @@ static void init_pci_source(void) mb(); } -static inline int get_pci_source(void) +static inline unsigned int get_pci_source(void) { u_int temp = 0; int irq = -1; @@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq) * Interrupt controller descriptor for cascaded PCI interrupt controller. */ -struct hw_interrupt_type tsi108_pci_irq = { +static struct irq_chip tsi108_pci_irq = { .typename = "tsi108_PCI_int", - .enable = tsi108_pci_irq_enable, - .disable = tsi108_pci_irq_disable, + .mask = tsi108_pci_irq_disable, .ack = tsi108_pci_irq_ack, .end = tsi108_pci_irq_end, + .unmask = tsi108_pci_irq_enable, }; /* @@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void) DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); for (i = 0; i < NUM_PCI_IRQS; i++) { - irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq; irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; } init_pci_source(); } -int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) { - return get_pci_source(); + unsigned int cascade_irq = get_pci_source(); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); } diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h index c4c278d72f71..2c702d35a7cf 100644 --- a/include/asm-powerpc/tsi108.h +++ b/include/asm-powerpc/tsi108.h @@ -1,16 +1,18 @@ /* - * include/asm-ppc/tsi108.h - * * common routine and memory layout for Tundra TSI108(Grendel) host bridge * memory controller. * * Author: Jacob Pan (jacob.pan@freescale.com) * Alex Bounine (alexandreb@tundra.com) - * 2004 (c) Freescale Semiconductor Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ + #ifndef __PPC_KERNEL_TSI108_H #define __PPC_KERNEL_TSI108_H diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h new file mode 100644 index 000000000000..3e4d04effa57 --- /dev/null +++ b/include/asm-powerpc/tsi108_irq.h @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2005 Tundra Semiconductor Corp. + * Alex Bounine, Date: Wed, 23 Aug 2006 10:20:27 +0800 Subject: [POWERPC] Pass UPIO_TSI flag to 8259 serial driver The patch passes the UPIO_TSI flag to general 8259 serial driver Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/legacy_serial.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 359ab89748e0..40a39291861f 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -115,6 +115,7 @@ static int __init add_legacy_soc_port(struct device_node *np, u64 addr; u32 *addrp; upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly * encoded in the device-tree. @@ -134,7 +135,10 @@ static int __init add_legacy_soc_port(struct device_node *np, /* Add port, irq will be dealt with later. We passed a translated * IO port value. It will be fixed up later along with the irq */ - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0); + else + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, @@ -464,7 +468,7 @@ static int __init serial_dev_init(void) fixup_port_irq(i, np, port); if (port->iotype == UPIO_PORT) fixup_port_pio(i, np, port); - if (port->iotype == UPIO_MEM) + if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI)) fixup_port_mmio(i, np, port); } -- cgit v1.2.2 From 87589f08beaec3e1f8a3af0c72406c845f706821 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 23 Aug 2006 16:58:39 +1000 Subject: [POWERPC] Correct masks used in emulating some instructions When we get an illegal instruction exception, we check to see whether the instruction is one that we emulate for the user program. Some of the masks we use in checking whether the offending instruction is one we care about didn't have the top bit set, which is the MSB of the major opcode. Thus some undefined opcodes could get emulated as other (defined but unimplemented) instructions. This corrects the masks. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/traps.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 125761aaa40b..4d0b4e74d579 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -585,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs) #define INST_MFSPR_PVR_MASK 0xfc1fffff #define INST_DCBA 0x7c0005ec -#define INST_DCBA_MASK 0x7c0007fe +#define INST_DCBA_MASK 0xfc0007fe #define INST_MCRXR 0x7c000400 -#define INST_MCRXR_MASK 0x7c0007fe +#define INST_MCRXR_MASK 0xfc0007fe #define INST_STRING 0x7c00042a -#define INST_STRING_MASK 0x7c0007fe -#define INST_STRING_GEN_MASK 0x7c00067e +#define INST_STRING_MASK 0xfc0007fe +#define INST_STRING_GEN_MASK 0xfc00067e #define INST_LSWI 0x7c0004aa #define INST_LSWX 0x7c00042a #define INST_STSWI 0x7c0005aa -- cgit v1.2.2 From d55c4a76f26160482158cd43788dcfc96a320a4f Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 23 Aug 2006 14:13:08 +0800 Subject: [POWERPC] Fix compile problem without CONFIG_PCI Compile fails without defining CONFIG_PCI. The patch fix this. [paulus@samba.org: Moved of_irq_pci_swizzle so we only need one #ifdef] Signed-off-by: Li Yang Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 6a7e997c401d..11052c212ad5 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -598,11 +598,6 @@ static struct device_node *of_irq_find_parent(struct device_node *child) return p; } -static u8 of_irq_pci_swizzle(u8 slot, u8 pin) -{ - return (((pin - 1) + slot) % 4) + 1; -} - /* This doesn't need to be called if you don't have any special workaround * flags to pass */ @@ -891,6 +886,12 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq } EXPORT_SYMBOL_GPL(of_irq_map_one); +#ifdef CONFIG_PCI +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) { struct device_node *dn, *ppnode; @@ -967,4 +968,4 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) return of_irq_map_raw(ppnode, &lspec, laddr, out_irq); } EXPORT_SYMBOL_GPL(of_irq_map_pci); - +#endif /* CONFIG_PCI */ -- cgit v1.2.2 From 834ac73d4bc804db8ccb3f2a517e36db5f6bc4bd Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 22 Aug 2006 22:45:06 +0300 Subject: IB/mthca: Update HCA firmware revisions Update the driver's list of HCA firmware revisions to make sure people running Sinai firmware older than 1.1.0 get a message suggesting a firmware upgrade. Update the Arbel versions as well while we are at it. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 557cde3a4563..7b82c1907f04 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -967,12 +967,12 @@ static struct { } mthca_hca_table[] = { [TAVOR] = { .latest_fw = MTHCA_FW_VER(3, 4, 0), .flags = 0 }, - [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 400), + [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 600), .flags = MTHCA_FLAG_PCIE }, - [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 0), + [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 400), .flags = MTHCA_FLAG_MEMFREE | MTHCA_FLAG_PCIE }, - [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 0, 800), + [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 1, 0), .flags = MTHCA_FLAG_MEMFREE | MTHCA_FLAG_PCIE | MTHCA_FLAG_SINAI_OPT } -- cgit v1.2.2 From 25848c4e502ec2bb94ee1f3c82709311059d0857 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 23 Aug 2006 15:33:07 -0700 Subject: [SCSI] esp: Fix build on SUN4. Noted by Alexey Dobriyan. Signed-off-by: David S. Miller --- drivers/scsi/esp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c index 98bd22714d0d..5630868c1b25 100644 --- a/drivers/scsi/esp.c +++ b/drivers/scsi/esp.c @@ -1146,7 +1146,7 @@ static struct sbus_dev sun4_esp_dev; static int __init esp_sun4_probe(struct scsi_host_template *tpnt) { if (sun4_esp_physaddr) { - memset(&sun4_esp_dev, 0, sizeof(esp_dev)); + memset(&sun4_esp_dev, 0, sizeof(sun4_esp_dev)); sun4_esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr; sun4_esp_dev.irqs[0] = 4; sun4_esp_dev.resource[0].start = sun4_esp_physaddr; @@ -1162,6 +1162,7 @@ static int __init esp_sun4_probe(struct scsi_host_template *tpnt) static int __devexit esp_sun4_remove(void) { + struct of_device *dev = &sun4_esp_dev.ofdev; struct esp *esp = dev_get_drvdata(&dev->dev); return esp_remove_common(esp); -- cgit v1.2.2 From 0f4184f73d5233214d3225a94fcf1bd4d6678d74 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 23 Aug 2006 15:50:57 -0700 Subject: [SERIAL] sunsab: Fix E250 console with RSC. This fixes yet another sunsab problem, when console is set to anything but the first port. The console framework calls sunsab_console_setup for each port, and we end up setting up a console on a not yet discovered port, which leads to an Oops. Instead, defer console setup until the requested port is properly initialized. Tested on an E250 through an RSC console. Reported by Daniel Smolik Signed-off-by: Marc Zyngier Signed-off-by: David S. Miller --- drivers/serial/sunsab.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index dc673e1b6fd9..cfe20f730436 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -886,6 +886,15 @@ static int sunsab_console_setup(struct console *con, char *options) unsigned long flags; unsigned int baud, quot; + /* + * The console framework calls us for each and every port + * registered. Defer the console setup until the requested + * port has been properly discovered. A bit of a hack, + * though... + */ + if (up->port.type != PORT_SUNSAB) + return -1; + printk("Console: ttyS%d (SAB82532)\n", (sunsab_reg.minor - 64) + con->index); -- cgit v1.2.2 From b8b99e857d0e258b0da17e55466e5142465d35fd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 23 Aug 2006 15:53:39 -0700 Subject: [SERIAL] sunzilog: Mirror the sunsab serial setup bug fix. Signed-off-by: David S. Miller --- drivers/serial/sunzilog.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 47bc3d57e019..d34f336d53d8 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1146,6 +1146,9 @@ static int __init sunzilog_console_setup(struct console *con, char *options) unsigned long flags; int baud, brg; + if (up->port.type != PORT_SUNZILOG) + return -1; + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", (sunzilog_reg.minor - 64) + con->index, con->index); -- cgit v1.2.2 From c9169f8747bb282cbe518132bf7d49755a00b6c1 Mon Sep 17 00:00:00 2001 From: Adam Litke Date: Fri, 18 Aug 2006 11:22:21 -0700 Subject: [POWERPC] hugepage BUG fix On Tue, 2006-08-15 at 08:22 -0700, Dave Hansen wrote: > kernel BUG in cache_free_debugcheck at mm/slab.c:2748! Alright, this one is only triggered when slab debugging is enabled. The slabs are assumed to be aligned on a HUGEPTE_TABLE_SIZE boundary. The free path makes use of this assumption and uses the lowest nibble to pass around an index into an array of kmem_cache pointers. With slab debugging turned on, the slab is still aligned, but the "working" object pointer is not. This would break the assumption above that a full nibble is available for the PGF_CACHENUM_MASK. The following patch reduces PGF_CACHENUM_MASK to cover only the two least significant bits, which is enough to cover the current number of 4 pgtable cache types. Then use this constant to mask out the appropriate part of the huge pte pointer. Signed-off-by: Adam Litke Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hugetlbpage.c | 2 +- include/asm-powerpc/pgalloc.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 266b8b2ceac9..5615acc29527 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) hpdp->pd = 0; tlb->need_flush = 1; pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, - HUGEPTE_TABLE_SIZE-1)); + PGF_CACHENUM_MASK)); } #ifdef CONFIG_PPC_64K_PAGES diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h index 9f0917c68659..ae63db7b3e7d 100644 --- a/include/asm-powerpc/pgalloc.h +++ b/include/asm-powerpc/pgalloc.h @@ -117,7 +117,7 @@ static inline void pte_free(struct page *ptepage) pte_free_kernel(page_address(ptepage)); } -#define PGF_CACHENUM_MASK 0xf +#define PGF_CACHENUM_MASK 0x3 typedef struct pgtable_free { unsigned long val; -- cgit v1.2.2 From cb958186ed543d1a4f074ceb1c783fe8b0908437 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Sat, 19 Aug 2006 19:37:57 +0200 Subject: [PATCH] Signedness issue in drivers/net/3c515.c while playing with gcc 4.1 -Wextra warnings, I came across this one: drivers/net/3c515.c:1027: warning: comparison of unsigned expression >= 0 is always true Since i is unsigned the >= 0 check in the for loop is always true, so we might spin there forever unless the if condition triggers. Since i is only used in this loop, this patch changes it to an integer. Signed-off-by: Eric Sesterhenn Signed-off-by: Jeff Garzik --- drivers/net/3c515.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c index 4532b17e40ea..aedfddf20cb3 100644 --- a/drivers/net/3c515.c +++ b/drivers/net/3c515.c @@ -1003,7 +1003,8 @@ static int corkscrew_start_xmit(struct sk_buff *skb, /* Calculate the next Tx descriptor entry. */ int entry = vp->cur_tx % TX_RING_SIZE; struct boom_tx_desc *prev_entry; - unsigned long flags, i; + unsigned long flags; + int i; if (vp->tx_full) /* No room to transmit with */ return 1; -- cgit v1.2.2 From 9a469abe9c6bab3ce237ee433541931bbd827faf Mon Sep 17 00:00:00 2001 From: Joerg Ahrens Date: Sun, 20 Aug 2006 21:51:57 +0100 Subject: [PATCH] xirc2ps_cs: Cannot reset card in atomic context I am using a Xircom CEM33 pcmcia NIC which has occasional hardware problems. If the netdev watchdog detects a transmit timeout, do_reset is called which msleeps - this is illegal in atomic context. This patch schedules the timeout handling as a workqueue item. Signed-off-by: Daniel Drake Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/xirc2ps_cs.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 9bae77ce1314..4122bb46f5ff 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -345,6 +345,7 @@ typedef struct local_info_t { void __iomem *dingo_ccr; /* only used for CEM56 cards */ unsigned last_ptr_value; /* last packets transmitted value */ const char *manf_str; + struct work_struct tx_timeout_task; } local_info_t; /**************** @@ -352,6 +353,7 @@ typedef struct local_info_t { */ static int do_start_xmit(struct sk_buff *skb, struct net_device *dev); static void do_tx_timeout(struct net_device *dev); +static void xirc2ps_tx_timeout_task(void *data); static struct net_device_stats *do_get_stats(struct net_device *dev); static void set_addresses(struct net_device *dev); static void set_multicast_list(struct net_device *dev); @@ -589,6 +591,7 @@ xirc2ps_probe(struct pcmcia_device *link) #ifdef HAVE_TX_TIMEOUT dev->tx_timeout = do_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; + INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task, dev); #endif return xirc2ps_config(link); @@ -1341,17 +1344,24 @@ xirc2ps_interrupt(int irq, void *dev_id, struct pt_regs *regs) /*====================================================================*/ static void -do_tx_timeout(struct net_device *dev) +xirc2ps_tx_timeout_task(void *data) { - local_info_t *lp = netdev_priv(dev); - printk(KERN_NOTICE "%s: transmit timed out\n", dev->name); - lp->stats.tx_errors++; + struct net_device *dev = data; /* reset the card */ do_reset(dev,1); dev->trans_start = jiffies; netif_wake_queue(dev); } +static void +do_tx_timeout(struct net_device *dev) +{ + local_info_t *lp = netdev_priv(dev); + lp->stats.tx_errors++; + printk(KERN_NOTICE "%s: transmit timed out\n", dev->name); + schedule_work(&lp->tx_timeout_task); +} + static int do_start_xmit(struct sk_buff *skb, struct net_device *dev) { -- cgit v1.2.2 From 8d91626636ed9ce8b742edb52ae48f2faefd5864 Mon Sep 17 00:00:00 2001 From: Don Fry Date: Tue, 22 Aug 2006 10:22:37 -0700 Subject: [PATCH] pcnet32: break in 2.6.18-rc1 identified A change I made for 2.6.17 and another for 2.6.18 do not work on older pcnet32 chips which I do not have access to. If the chip is a 79C970 or 79C965, do not try and suspend or check the link status. I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976, and 79C978. Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 4daafe303358..d50bcb89dd28 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -202,6 +202,8 @@ static int homepna[MAX_UNITS]; #define CSR15 15 #define PCNET32_MC_FILTER 8 +#define PCNET32_79C970A 0x2621 + /* The PCNET32 Rx and Tx ring descriptors. */ struct pcnet32_rx_head { u32 base; @@ -289,6 +291,7 @@ struct pcnet32_private { /* each bit indicates an available PHY */ u32 phymask; + unsigned short chip_version; /* which variant this is */ }; static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *); @@ -724,9 +727,11 @@ static u32 pcnet32_get_link(struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); if (lp->mii) { r = mii_link_ok(&lp->mii_if); - } else { + } else if (lp->chip_version >= PCNET32_79C970A) { ulong ioaddr = dev->base_addr; /* card base I/O address */ r = (lp->a.read_bcr(ioaddr, 4) != 0xc0); + } else { /* can not detect link on really old chips */ + r = 1; } spin_unlock_irqrestore(&lp->lock, flags); @@ -1091,6 +1096,10 @@ static int pcnet32_suspend(struct net_device *dev, unsigned long *flags, ulong ioaddr = dev->base_addr; int ticks; + /* really old chips have to be stopped. */ + if (lp->chip_version < PCNET32_79C970A) + return 0; + /* set SUSPEND (SPND) - CSR5 bit 0 */ csr5 = a->read_csr(ioaddr, CSR5); a->write_csr(ioaddr, CSR5, csr5 | CSR5_SUSPEND); @@ -1529,6 +1538,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) lp->mii_if.reg_num_mask = 0x1f; lp->dxsuflo = dxsuflo; lp->mii = mii; + lp->chip_version = chip_version; lp->msg_enable = pcnet32_debug; if ((cards_found >= MAX_UNITS) || (options[cards_found] > sizeof(options_mapping))) @@ -1839,10 +1849,7 @@ static int pcnet32_open(struct net_device *dev) val |= 2; } else if (lp->options & PCNET32_PORT_ASEL) { /* workaround of xSeries250, turn on for 79C975 only */ - i = ((lp->a.read_csr(ioaddr, 88) | - (lp->a. - read_csr(ioaddr, 89) << 16)) >> 12) & 0xffff; - if (i == 0x2627) + if (lp->chip_version == 0x2627) val |= 3; } lp->a.write_bcr(ioaddr, 9, val); @@ -1986,9 +1993,11 @@ static int pcnet32_open(struct net_device *dev) netif_start_queue(dev); - /* Print the link status and start the watchdog */ - pcnet32_check_media(dev, 1); - mod_timer(&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT); + if (lp->chip_version >= PCNET32_79C970A) { + /* Print the link status and start the watchdog */ + pcnet32_check_media(dev, 1); + mod_timer(&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT); + } i = 0; while (i++ < 100) -- cgit v1.2.2 From c5ab964debe92d0ec7af330f350a3433c1b5b61e Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Tue, 22 Aug 2006 18:55:44 +0100 Subject: [PATCH] spectrum_cs: Fix firmware uploading errors spectrum_cs: Fix the logic so we error when the device is *not* present! This fixes firmware upload failures which prevent the driver from working (the bug is also present in 2.6.17). Signed-off-by: Richard Purdie Signed-off-by: Jeff Garzik --- drivers/net/wireless/spectrum_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 7f78b7801fb3..bcc7038130f6 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -242,7 +242,7 @@ spectrum_reset(struct pcmcia_device *link, int idle) u_int save_cor; /* Doing it if hardware is gone is guaranteed crash */ - if (pcmcia_dev_present(link)) + if (!pcmcia_dev_present(link)) return -ENODEV; /* Save original COR value */ -- cgit v1.2.2 From f3745a3f9fa39fa3c62f7d5b8549ee787d2c6848 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 22 Aug 2006 21:06:46 +0900 Subject: [PATCH] ata_piix: ignore PCS on ICH5 There have been a number of reports regarding some ICH5s failing to detect devices since the PCS handling update. Analysis shows that these problems are caused by bogus PCS values from those controllers. Before the PCS update, the driver didn't honor PCS regs exactly and probed them in many cases PCS reports no device. Now that PCS is honored exactly, these hardware problems are visible. This patch makes ICH5 ignore PCS. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 01b3530cf6df..3b98f1813356 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -390,7 +390,8 @@ static struct ata_port_info piix_port_info[] = { /* ich5_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | + PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ -- cgit v1.2.2 From 9dd9c16465c82d1385f97d2a245641464fcb7894 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 22 Aug 2006 21:15:58 +0900 Subject: [PATCH] ata_piix: implement force_pcs module parameter This patch implements force_pcs module parameter for ata_piix. If 1, PCS is ignored, 2 honored. As there seem to be quite a few ICHs w/ impaired PCS, this option will be useful for cases where the default setting doesn't work. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 3b98f1813356..2d20caf377f5 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -468,6 +468,11 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, piix_pci_tbl); MODULE_VERSION(DRV_VERSION); +static int force_pcs = 0; +module_param(force_pcs, int, 0444); +MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around " + "device mis-detection (0=default, 1=ignore PCS, 2=honor PCS)"); + /** * piix_pata_cbl_detect - Probe host controller cable detect info * @ap: Port for which cable detect info is desired @@ -812,6 +817,7 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) } static void __devinit piix_init_pcs(struct pci_dev *pdev, + struct ata_port_info *pinfo, const struct piix_map_db *map_db) { u16 pcs, new_pcs; @@ -825,6 +831,18 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev, pci_write_config_word(pdev, ICH5_PCS, new_pcs); msleep(150); } + + if (force_pcs == 1) { + dev_printk(KERN_INFO, &pdev->dev, + "force ignoring PCS (0x%x)\n", new_pcs); + pinfo[0].host_flags |= PIIX_FLAG_IGNORE_PCS; + pinfo[1].host_flags |= PIIX_FLAG_IGNORE_PCS; + } else if (force_pcs == 2) { + dev_printk(KERN_INFO, &pdev->dev, + "force honoring PCS (0x%x)\n", new_pcs); + pinfo[0].host_flags &= ~PIIX_FLAG_IGNORE_PCS; + pinfo[1].host_flags &= ~PIIX_FLAG_IGNORE_PCS; + } } static void __devinit piix_init_sata_map(struct pci_dev *pdev, @@ -933,7 +951,8 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (host_flags & ATA_FLAG_SATA) { piix_init_sata_map(pdev, port_info, piix_map_db_table[ent->driver_data]); - piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]); + piix_init_pcs(pdev, port_info, + piix_map_db_table[ent->driver_data]); } /* On ICH5, some BIOSen disable the interrupt using the -- cgit v1.2.2 From ac2164d5e425fa4755bdbab9641d8dab7239b6f5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 23 Aug 2006 01:00:27 +0900 Subject: [PATCH] sata_via: use old SCR access pattern on vt6420 vt6420 has super-fragile SCR registers which can hang the whole machine if accessed with the wrong timings. This patch makes sata_via use SCR registers only during probing and with the same timings as before (pre new EH), which is proven to work. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_via.c | 117 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 112 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 03baec2191bf..01d40369a8a5 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -74,6 +74,7 @@ enum { static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg); static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static void vt6420_error_handler(struct ata_port *ap); static const struct pci_device_id svia_pci_tbl[] = { { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, @@ -107,7 +108,38 @@ static struct scsi_host_template svia_sht = { .bios_param = ata_std_bios_param, }; -static const struct ata_port_operations svia_sata_ops = { +static const struct ata_port_operations vt6420_sata_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = vt6420_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations vt6421_sata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, @@ -141,13 +173,13 @@ static const struct ata_port_operations svia_sata_ops = { .host_stop = ata_host_stop, }; -static struct ata_port_info svia_port_info = { +static struct ata_port_info vt6420_port_info = { .sht = &svia_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = 0x7f, - .port_ops = &svia_sata_ops, + .port_ops = &vt6420_sata_ops, }; MODULE_AUTHOR("Jeff Garzik"); @@ -170,6 +202,81 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) outl(val, ap->ioaddr.scr_addr + (4 * sc_reg)); } +/** + * vt6420_prereset - prereset for vt6420 + * @ap: target ATA port + * + * SCR registers on vt6420 are pieces of shit and may hang the + * whole machine completely if accessed with the wrong timing. + * To avoid such catastrophe, vt6420 doesn't provide generic SCR + * access operations, but uses SStatus and SControl only during + * boot probing in controlled way. + * + * As the old (pre EH update) probing code is proven to work, we + * strictly follow the access pattern. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int vt6420_prereset(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned long timeout = jiffies + (HZ * 5); + u32 sstatus, scontrol; + int online; + + /* don't do any SCR stuff if we're not loading */ + if (!ATA_PFLAG_LOADING) + goto skip_scr; + + /* Resume phy. This is the old resume sequence from + * __sata_phy_reset(). + */ + svia_scr_write(ap, SCR_CONTROL, 0x300); + svia_scr_read(ap, SCR_CONTROL); /* flush */ + + /* wait for phy to become ready, if necessary */ + do { + msleep(200); + if ((svia_scr_read(ap, SCR_STATUS) & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); + + /* open code sata_print_link_status() */ + sstatus = svia_scr_read(ap, SCR_STATUS); + scontrol = svia_scr_read(ap, SCR_CONTROL); + + online = (sstatus & 0xf) == 0x3; + + ata_port_printk(ap, KERN_INFO, + "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n", + online ? "up" : "down", sstatus, scontrol); + + /* SStatus is read one more time */ + svia_scr_read(ap, SCR_STATUS); + + if (!online) { + /* tell EH to bail */ + ehc->i.action &= ~ATA_EH_RESET_MASK; + return 0; + } + + skip_scr: + /* wait for !BSY */ + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + return 0; +} + +static void vt6420_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset, + NULL, ata_std_postreset); +} + static const unsigned int svia_bar_sizes[] = { 8, 4, 8, 4, 16, 256 }; @@ -210,7 +317,7 @@ static void vt6421_init_addrs(struct ata_probe_ent *probe_ent, static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) { struct ata_probe_ent *probe_ent; - struct ata_port_info *ppi = &svia_port_info; + struct ata_port_info *ppi = &vt6420_port_info; probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) @@ -239,7 +346,7 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) probe_ent->sht = &svia_sht; probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; - probe_ent->port_ops = &svia_sata_ops; + probe_ent->port_ops = &vt6421_sata_ops; probe_ent->n_ports = N_PORTS; probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; -- cgit v1.2.2 From 8e79a441a4d8a34d64efe93add49b3eefca5cd1c Mon Sep 17 00:00:00 2001 From: Horst Hummel Date: Thu, 24 Aug 2006 13:22:36 +0200 Subject: [S390] dasd PAV enabling. The subsystem check in the PAV code is incorrect, it enables PAV per device instead of per subsystem. Signed-off-by: Horst Hummel Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_devmap.c | 8 ++++---- drivers/s390/block/dasd_eckd.c | 14 +++++++------- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index 9d0c6e1a0e66..9af02c79ce8a 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -54,11 +54,11 @@ struct dasd_devmap { */ struct dasd_server_ssid_map { struct list_head list; - struct server_id { + struct system_id { char vendor[4]; char serial[15]; + __u16 ssid; } sid; - __u16 ssid; }; static struct list_head dasd_server_ssid_list; @@ -904,14 +904,14 @@ dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid) return -ENOMEM; strncpy(srv->sid.vendor, uid->vendor, sizeof(srv->sid.vendor) - 1); strncpy(srv->sid.serial, uid->serial, sizeof(srv->sid.serial) - 1); - srv->ssid = uid->ssid; + srv->sid.ssid = uid->ssid; /* server is already contained ? */ spin_lock(&dasd_devmap_lock); devmap->uid = *uid; list_for_each_entry(tmp, &dasd_server_ssid_list, list) { if (!memcmp(&srv->sid, &tmp->sid, - sizeof(struct dasd_server_ssid_map))) { + sizeof(struct system_id))) { kfree(srv); srv = NULL; break; diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 957ed5db98e4..b7a7fac3f7c3 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -607,7 +607,7 @@ dasd_eckd_psf_ssc(struct dasd_device *device) * Valide storage server of current device. */ static int -dasd_eckd_validate_server(struct dasd_device *device) +dasd_eckd_validate_server(struct dasd_device *device, struct dasd_uid *uid) { int rc; @@ -616,11 +616,11 @@ dasd_eckd_validate_server(struct dasd_device *device) return 0; rc = dasd_eckd_psf_ssc(device); - if (rc) - /* may be requested feature is not available on server, - * therefore just report error and go ahead */ - DEV_MESSAGE(KERN_INFO, device, - "Perform Subsystem Function returned rc=%d", rc); + /* may be requested feature is not available on server, + * therefore just report error and go ahead */ + DEV_MESSAGE(KERN_INFO, device, + "PSF-SSC on storage subsystem %s.%s.%04x returned rc=%d", + uid->vendor, uid->serial, uid->ssid, rc); /* RE-Read Configuration Data */ return dasd_eckd_read_conf(device); } @@ -666,7 +666,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) return rc; rc = dasd_set_uid(device->cdev, &uid); if (rc == 1) /* new server found */ - rc = dasd_eckd_validate_server(device); + rc = dasd_eckd_validate_server(device, &uid); if (rc) return rc; -- cgit v1.2.2 From ddeff520f02b92128132c282c350fa72afffb84a Mon Sep 17 00:00:00 2001 From: Nikita Danilov Date: Wed, 9 Aug 2006 13:53:47 -0400 Subject: NFS: Fix a potential deadlock in nfs_release_page nfs_wb_page() waits on request completion and, as a result, is not safe to be called from nfs_release_page() invoked by VM scanner as part of GFP_NOFS allocation. Fix possible deadlock by analyzing gfp mask and refusing to release page if __GFP_FS is not set. Signed-off-by: Nikita Danilov Signed-off-by: Trond Myklebust (cherry picked from 374d969debfb290bafcb41d28918dc6f7e43ce31 commit) --- fs/nfs/file.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index cc2b874ad5a4..48e892880d5b 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -312,7 +312,13 @@ static void nfs_invalidate_page(struct page *page, unsigned long offset) static int nfs_release_page(struct page *page, gfp_t gfp) { - return !nfs_wb_page(page->mapping->host, page); + if (gfp & __GFP_FS) + return !nfs_wb_page(page->mapping->host, page); + else + /* + * Avoid deadlock on nfs_wait_on_request(). + */ + return 0; } const struct address_space_operations nfs_file_aops = { -- cgit v1.2.2 From a634904a7de0d3a0bc606f608007a34e8c05bfee Mon Sep 17 00:00:00 2001 From: ASANO Masahiro Date: Tue, 22 Aug 2006 20:06:02 -0400 Subject: VFS: add lookup hint for network file systems I'm trying to speeding up mkdir(2) for network file systems. A typical mkdir(2) calls two inode_operations: lookup and mkdir. The lookup operation would fail with ENOENT in common case. I think it is unnecessary because the subsequent mkdir operation can check it. In case of creat(2), lookup operation is called with the LOOKUP_CREATE flag, so individual filesystem can omit real lookup. e.g. nfs_lookup(). Here is a sample patch which uses LOOKUP_CREATE and O_EXCL on mkdir, symlink and mknod. This uses the gadget for creat(2). And here is the result of a benchmark on NFSv3. mkdir(2) 10,000 times: original 50.5 sec patched 29.0 sec Signed-off-by: ASANO Masahiro Signed-off-by: Andrew Morton Signed-off-by: Trond Myklebust (cherry picked from fab7bf44449b29f9d5572a5dd8adcf7c91d5bf0f commit) --- fs/namei.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/namei.c b/fs/namei.c index 55a131230f94..863166441bf3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1767,6 +1767,8 @@ struct dentry *lookup_create(struct nameidata *nd, int is_dir) if (nd->last_type != LAST_NORM) goto fail; nd->flags &= ~LOOKUP_PARENT; + nd->flags |= LOOKUP_CREATE; + nd->intent.open.flags = O_EXCL; /* * Do the final lookup. -- cgit v1.2.2 From 5d67476fff2df6ff12f60b540fd0e74cf2a668f9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 31 Jul 2006 14:11:48 -0700 Subject: SUNRPC: make rpc_unlink() take a dentry argument instead of a path Signe-off-by: Trond Myklebust (cherry picked from 88bf6d811b01a4be7fd507d18bf5f1c527989089 commit) --- fs/nfs/idmap.c | 3 +-- include/linux/sunrpc/rpc_pipe_fs.h | 2 +- net/sunrpc/auth_gss/auth_gss.c | 2 +- net/sunrpc/rpc_pipe.c | 20 ++++++-------------- 4 files changed, 9 insertions(+), 18 deletions(-) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index b81e7ed3c902..df0be1214358 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -130,9 +130,8 @@ nfs_idmap_delete(struct nfs4_client *clp) if (!idmap) return; + rpc_unlink(idmap->idmap_dentry); dput(idmap->idmap_dentry); - idmap->idmap_dentry = NULL; - rpc_unlink(idmap->idmap_path); clp->cl_idmap = NULL; kfree(idmap); } diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 2c2189cb30aa..04d2767d5ef7 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -44,7 +44,7 @@ extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *); extern int rpc_rmdir(char *); extern struct dentry *rpc_mkpipe(char *, void *, struct rpc_pipe_ops *, int flags); -extern int rpc_unlink(char *); +extern int rpc_unlink(struct dentry *); extern struct vfsmount *rpc_get_mount(void); extern void rpc_put_mount(void); diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 4a9aa9393b97..beaa7b848246 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -718,7 +718,7 @@ gss_destroy(struct rpc_auth *auth) auth, auth->au_flavor); gss_auth = container_of(auth, struct gss_auth, rpc_auth); - rpc_unlink(gss_auth->path); + rpc_unlink(gss_auth->dentry); dput(gss_auth->dentry); gss_auth->dentry = NULL; gss_mech_put(gss_auth->mech); diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index a3bd2db2e024..9144f2767b66 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -746,22 +746,15 @@ err_dput: } int -rpc_unlink(char *path) +rpc_unlink(struct dentry *dentry) { - struct nameidata nd; - struct dentry *dentry; + struct dentry *parent; struct inode *dir; - int error; + int error = 0; - if ((error = rpc_lookup_parent(path, &nd)) != 0) - return error; - dir = nd.dentry->d_inode; + parent = dget_parent(dentry); + dir = parent->d_inode; mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT); - dentry = lookup_one_len(nd.last.name, nd.dentry, nd.last.len); - if (IS_ERR(dentry)) { - error = PTR_ERR(dentry); - goto out_release; - } d_drop(dentry); if (dentry->d_inode) { rpc_close_pipes(dentry->d_inode); @@ -769,9 +762,8 @@ rpc_unlink(char *path) } dput(dentry); inode_dir_notify(dir, DN_DELETE); -out_release: mutex_unlock(&dir->i_mutex); - rpc_release_path(&nd); + dput(parent); return error; } -- cgit v1.2.2 From dff02cc1a34fcb60904a2c57cb351857cc11219e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 31 Jul 2006 14:17:18 -0700 Subject: NFS: clean up rpc_rmdir Make it take a dentry argument instead of a path Signed-off-by: Trond Myklebust (cherry picked from 648d4116eb2509f010f7f34704a650150309b3e7 commit) --- include/linux/sunrpc/rpc_pipe_fs.h | 2 +- net/sunrpc/clnt.c | 6 +++--- net/sunrpc/rpc_pipe.c | 18 +++++------------- 3 files changed, 9 insertions(+), 17 deletions(-) diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 04d2767d5ef7..a481472c9484 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -42,7 +42,7 @@ RPC_I(struct inode *inode) extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *); -extern int rpc_rmdir(char *); +extern int rpc_rmdir(struct dentry *); extern struct dentry *rpc_mkpipe(char *, void *, struct rpc_pipe_ops *, int flags); extern int rpc_unlink(struct dentry *); extern struct vfsmount *rpc_get_mount(void); diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index d6409e757219..d307556872db 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -183,7 +183,7 @@ rpc_new_client(struct rpc_xprt *xprt, char *servname, out_no_auth: if (!IS_ERR(clnt->cl_dentry)) { - rpc_rmdir(clnt->cl_pathname); + rpc_rmdir(clnt->cl_dentry); dput(clnt->cl_dentry); rpc_put_mount(); } @@ -320,8 +320,8 @@ rpc_destroy_client(struct rpc_clnt *clnt) rpc_destroy_client(clnt->cl_parent); goto out_free; } - if (clnt->cl_pathname[0]) - rpc_rmdir(clnt->cl_pathname); + if (!IS_ERR(clnt->cl_dentry)) + rpc_rmdir(clnt->cl_dentry); if (clnt->cl_xprt) { xprt_destroy(clnt->cl_xprt); clnt->cl_xprt = NULL; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 9144f2767b66..9c355e1ae61a 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -684,28 +684,20 @@ err_dput: } int -rpc_rmdir(char *path) +rpc_rmdir(struct dentry *dentry) { - struct nameidata nd; - struct dentry *dentry; + struct dentry *parent; struct inode *dir; int error; - if ((error = rpc_lookup_parent(path, &nd)) != 0) - return error; - dir = nd.dentry->d_inode; + parent = dget_parent(dentry); + dir = parent->d_inode; mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT); - dentry = lookup_one_len(nd.last.name, nd.dentry, nd.last.len); - if (IS_ERR(dentry)) { - error = PTR_ERR(dentry); - goto out_release; - } rpc_depopulate(dentry); error = __rpc_rmdir(dir, dentry); dput(dentry); -out_release: mutex_unlock(&dir->i_mutex); - rpc_release_path(&nd); + dput(parent); return error; } -- cgit v1.2.2 From 68adb0af51ebccb72ffb14d49cb8121b1afc4259 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 10 Aug 2006 17:51:46 -0400 Subject: SUNRPC: rpc_unlink() must check for unhashed dentries A prior call to rpc_depopulate() by rpc_rmdir() on the parent directory may have already called simple_unlink() on this entry. Add the same check to rpc_rmdir(). Also remove a redundant call to rpc_close_pipes() in rpc_rmdir. Signed-off-by: Trond Myklebust (cherry picked from 0bbfb9d20f6437c4031aa3bf9b4d311a053e58e3 commit) --- net/sunrpc/rpc_pipe.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 9c355e1ae61a..0b1a1ac8a4bc 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -539,6 +539,7 @@ repeat: rpc_close_pipes(dentry->d_inode); simple_unlink(dir, dentry); } + inode_dir_notify(dir, DN_DELETE); dput(dentry); } while (n); goto repeat; @@ -610,8 +611,8 @@ __rpc_rmdir(struct inode *dir, struct dentry *dentry) int error; shrink_dcache_parent(dentry); - if (dentry->d_inode) - rpc_close_pipes(dentry->d_inode); + if (d_unhashed(dentry)) + return 0; if ((error = simple_rmdir(dir, dentry)) != 0) return error; if (!error) { @@ -747,13 +748,15 @@ rpc_unlink(struct dentry *dentry) parent = dget_parent(dentry); dir = parent->d_inode; mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT); - d_drop(dentry); - if (dentry->d_inode) { - rpc_close_pipes(dentry->d_inode); - error = simple_unlink(dir, dentry); + if (!d_unhashed(dentry)) { + d_drop(dentry); + if (dentry->d_inode) { + rpc_close_pipes(dentry->d_inode); + error = simple_unlink(dir, dentry); + } + inode_dir_notify(dir, DN_DELETE); } dput(dentry); - inode_dir_notify(dir, DN_DELETE); mutex_unlock(&dir->i_mutex); dput(parent); return error; -- cgit v1.2.2 From 8f8e7a50f450fcb86a5b2ffb94543c57a14f8260 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 14 Aug 2006 13:11:15 -0400 Subject: SUNRPC: Fix dentry refcounting issues with users of rpc_pipefs rpc_unlink() and rpc_rmdir() will dput the dentry reference for you. Signed-off-by: Trond Myklebust (cherry picked from a05a57effa71a1f67ccbfc52335c10c8b85f3f6a commit) --- fs/nfs/idmap.c | 1 - net/sunrpc/auth_gss/auth_gss.c | 1 - net/sunrpc/clnt.c | 15 ++++++--------- 3 files changed, 6 insertions(+), 11 deletions(-) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index df0be1214358..07a5dd57646e 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -131,7 +131,6 @@ nfs_idmap_delete(struct nfs4_client *clp) if (!idmap) return; rpc_unlink(idmap->idmap_dentry); - dput(idmap->idmap_dentry); clp->cl_idmap = NULL; kfree(idmap); } diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index beaa7b848246..ef1cf5b476c8 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -719,7 +719,6 @@ gss_destroy(struct rpc_auth *auth) gss_auth = container_of(auth, struct gss_auth, rpc_auth); rpc_unlink(gss_auth->dentry); - dput(gss_auth->dentry); gss_auth->dentry = NULL; gss_mech_put(gss_auth->mech); diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index d307556872db..d9eac7069101 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -184,7 +184,6 @@ rpc_new_client(struct rpc_xprt *xprt, char *servname, out_no_auth: if (!IS_ERR(clnt->cl_dentry)) { rpc_rmdir(clnt->cl_dentry); - dput(clnt->cl_dentry); rpc_put_mount(); } out_no_path: @@ -251,10 +250,8 @@ rpc_clone_client(struct rpc_clnt *clnt) new->cl_autobind = 0; new->cl_oneshot = 0; new->cl_dead = 0; - if (!IS_ERR(new->cl_dentry)) { + if (!IS_ERR(new->cl_dentry)) dget(new->cl_dentry); - rpc_get_mount(); - } rpc_init_rtt(&new->cl_rtt_default, clnt->cl_xprt->timeout.to_initval); if (new->cl_auth) atomic_inc(&new->cl_auth->au_count); @@ -317,11 +314,15 @@ rpc_destroy_client(struct rpc_clnt *clnt) clnt->cl_auth = NULL; } if (clnt->cl_parent != clnt) { + if (!IS_ERR(clnt->cl_dentry)) + dput(clnt->cl_dentry); rpc_destroy_client(clnt->cl_parent); goto out_free; } - if (!IS_ERR(clnt->cl_dentry)) + if (!IS_ERR(clnt->cl_dentry)) { rpc_rmdir(clnt->cl_dentry); + rpc_put_mount(); + } if (clnt->cl_xprt) { xprt_destroy(clnt->cl_xprt); clnt->cl_xprt = NULL; @@ -331,10 +332,6 @@ rpc_destroy_client(struct rpc_clnt *clnt) out_free: rpc_free_iostats(clnt->cl_metrics); clnt->cl_metrics = NULL; - if (!IS_ERR(clnt->cl_dentry)) { - dput(clnt->cl_dentry); - rpc_put_mount(); - } kfree(clnt); return 0; } -- cgit v1.2.2 From 01df9c5e918ae5559f2d96da0143f8bfbb9e6171 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 10 Aug 2006 11:58:57 -0400 Subject: LOCKD: Fix a deadlock in nlm_traverse_files() nlm_traverse_files() is not allowed to hold the nlm_file_mutex while calling nlm_inspect file, since it may end up calling nlm_release_file() when releaseing the blocks. Signed-off-by: Trond Myklebust (cherry picked from e558d3cde986e04f68afe8c790ad68ef4b94587a commit) --- fs/lockd/svcsubs.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/lockd/svcsubs.c b/fs/lockd/svcsubs.c index 2a4df9b3779a..01b4db9e5466 100644 --- a/fs/lockd/svcsubs.c +++ b/fs/lockd/svcsubs.c @@ -237,19 +237,22 @@ static int nlm_traverse_files(struct nlm_host *host, int action) { struct nlm_file *file, **fp; - int i; + int i, ret = 0; mutex_lock(&nlm_file_mutex); for (i = 0; i < FILE_NRHASH; i++) { fp = nlm_files + i; while ((file = *fp) != NULL) { + file->f_count++; + mutex_unlock(&nlm_file_mutex); + /* Traverse locks, blocks and shares of this file * and update file->f_locks count */ - if (nlm_inspect_file(host, file, action)) { - mutex_unlock(&nlm_file_mutex); - return 1; - } + if (nlm_inspect_file(host, file, action)) + ret = 1; + mutex_lock(&nlm_file_mutex); + file->f_count--; /* No more references to this file. Let go of it. */ if (!file->f_blocks && !file->f_locks && !file->f_shares && !file->f_count) { @@ -262,7 +265,7 @@ nlm_traverse_files(struct nlm_host *host, int action) } } mutex_unlock(&nlm_file_mutex); - return 0; + return ret; } /* -- cgit v1.2.2 From 79558f3610efd7928e8882b2eaca3093b283630e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 22 Aug 2006 13:44:32 -0400 Subject: NFS: Fix issue with EIO on NFS read The problem is that we may be caching writes that would extend the file and create a hole in the region that we are reading. In this case, we need to detect the eof from the server, ensure that we zero out the pages that are part of the hole and mark them as up to date. Signed-off-by: Trond Myklebust (cherry picked from 856b603b01b99146918c093969b6cb1b1b0f1c01 commit) --- fs/nfs/read.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 65c0c5b32351..da9cf11c326f 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -116,10 +116,17 @@ static void nfs_readpage_truncate_uninitialised_page(struct nfs_read_data *data) pages = &data->args.pages[base >> PAGE_CACHE_SHIFT]; base &= ~PAGE_CACHE_MASK; pglen = PAGE_CACHE_SIZE - base; - if (pglen < remainder) + for (;;) { + if (remainder <= pglen) { + memclear_highpage_flush(*pages, base, remainder); + break; + } memclear_highpage_flush(*pages, base, pglen); - else - memclear_highpage_flush(*pages, base, remainder); + pages++; + remainder -= pglen; + pglen = PAGE_CACHE_SIZE; + base = 0; + } } /* @@ -476,6 +483,8 @@ static void nfs_readpage_set_pages_uptodate(struct nfs_read_data *data) unsigned int base = data->args.pgbase; struct page **pages; + if (data->res.eof) + count = data->args.count; if (unlikely(count == 0)) return; pages = &data->args.pages[base >> PAGE_CACHE_SHIFT]; @@ -483,11 +492,7 @@ static void nfs_readpage_set_pages_uptodate(struct nfs_read_data *data) count += base; for (;count >= PAGE_CACHE_SIZE; count -= PAGE_CACHE_SIZE, pages++) SetPageUptodate(*pages); - /* - * Was this an eof or a short read? If the latter, don't mark the page - * as uptodate yet. - */ - if (count > 0 && (data->res.eof || data->args.count == data->res.count)) + if (count != 0) SetPageUptodate(*pages); } @@ -502,6 +507,8 @@ static void nfs_readpage_set_pages_error(struct nfs_read_data *data) count += base; for (;count >= PAGE_CACHE_SIZE; count -= PAGE_CACHE_SIZE, pages++) SetPageError(*pages); + if (count != 0) + SetPageError(*pages); } /* -- cgit v1.2.2 From 8e037094c414172481c5ce903efdab50ce932343 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 22 Aug 2006 20:06:15 -0400 Subject: SUNRPC: avoid choosing an IPMI port for RPC traffic Some hardware uses port 664 for its hardware-based IPMI listener. Teach the RPC client to avoid using that port by raising the default minimum port number to 665. Test plan: Find a mainboard known to use port 664 for IPMI; enable IPMI; mount NFS servers in a tight loop. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust (cherry picked from 58e8cb3a035d22fc386e1c53a5d98c3f219530fb commit) --- include/linux/sunrpc/xprt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 840e47a4ccc5..3a0cca255b76 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -37,7 +37,7 @@ extern unsigned int xprt_max_resvport; #define RPC_MIN_RESVPORT (1U) #define RPC_MAX_RESVPORT (65535U) -#define RPC_DEF_MIN_RESVPORT (650U) +#define RPC_DEF_MIN_RESVPORT (665U) #define RPC_DEF_MAX_RESVPORT (1023U) /* -- cgit v1.2.2 From 3cedf13af9f7e61aca0dbbd11b601ac93bf93a9f Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 24 Aug 2006 15:44:12 -0400 Subject: NFSv4: increase client-provided nfs4 clientid size Neil Brown observed that the current limit of 32 bytes isn't enough to hold two ip addresses and the rest of the stuff we're putting in it, so it's often truncated to the point where it's unlikely to be unique. This can cause spurious CLID_INUSE's from the server. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust (cherry picked from fc8c17ec251e984ab3df9182ed097aa5b577c915 commit) --- include/linux/nfs_xdr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 2d3fb6416d91..db9cbf68e12b 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -659,7 +659,7 @@ struct nfs4_rename_res { struct nfs4_setclientid { const nfs4_verifier * sc_verifier; /* request */ unsigned int sc_name_len; - char sc_name[32]; /* request */ + char sc_name[48]; /* request */ u32 sc_prog; /* request */ unsigned int sc_netid_len; char sc_netid[4]; /* request */ -- cgit v1.2.2 From e8896495bca8490a427409e0886d63d05419ec65 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 24 Aug 2006 15:44:19 -0400 Subject: NFS: Check lengths more thoroughly in NFS4 readdir XDR decode Check the bounds of length specifiers more thoroughly in the XDR decoding of NFS4 readdir reply data. Currently, if the server returns a bitmap or attr length that causes the current decode point pointer to wrap, this could go undetected (consider a small "negative" length on a 32-bit machine). Also add a check into the main XDR decode handler to make sure that the amount of data is a multiple of four bytes (as specified by RFC-1014). This makes sure that we can do u32* pointer subtraction in the NFS client without risking an undefined result (the result is undefined if the pointers are not correctly aligned with respect to one another). Signed-Off-By: David Howells Signed-off-by: Trond Myklebust (cherry picked from 5861fddd64a7eaf7e8b1a9997455a24e7f688092 commit) --- fs/nfs/nfs4xdr.c | 21 +++++++++++---------- net/sunrpc/clnt.c | 11 +++++++++++ 2 files changed, 22 insertions(+), 10 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 1750d996f49f..730ec8fb31c6 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -3355,7 +3355,7 @@ static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct n struct kvec *iov = rcvbuf->head; unsigned int nr, pglen = rcvbuf->page_len; uint32_t *end, *entry, *p, *kaddr; - uint32_t len, attrlen; + uint32_t len, attrlen, xlen; int hdrlen, recvd, status; status = decode_op_hdr(xdr, OP_READDIR); @@ -3377,10 +3377,10 @@ static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct n BUG_ON(pglen + readdir->pgbase > PAGE_CACHE_SIZE); kaddr = p = (uint32_t *) kmap_atomic(page, KM_USER0); - end = (uint32_t *) ((char *)p + pglen + readdir->pgbase); + end = p + ((pglen + readdir->pgbase) >> 2); entry = p; for (nr = 0; *p++; nr++) { - if (p + 3 > end) + if (end - p < 3) goto short_pkt; dprintk("cookie = %Lu, ", *((unsigned long long *)p)); p += 2; /* cookie */ @@ -3389,18 +3389,19 @@ static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct n printk(KERN_WARNING "NFS: giant filename in readdir (len 0x%x)\n", len); goto err_unmap; } - dprintk("filename = %*s\n", len, (char *)p); - p += XDR_QUADLEN(len); - if (p + 1 > end) + xlen = XDR_QUADLEN(len); + if (end - p < xlen + 1) goto short_pkt; + dprintk("filename = %*s\n", len, (char *)p); + p += xlen; len = ntohl(*p++); /* bitmap length */ - p += len; - if (p + 1 > end) + if (end - p < len + 1) goto short_pkt; + p += len; attrlen = XDR_QUADLEN(ntohl(*p++)); - p += attrlen; /* attributes */ - if (p + 2 > end) + if (end - p < attrlen + 2) goto short_pkt; + p += attrlen; /* attributes */ entry = p; } if (!nr && (entry[0] != 0 || entry[1] == 0)) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index d9eac7069101..3e19d321067a 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1181,6 +1181,17 @@ call_verify(struct rpc_task *task) u32 *p = iov->iov_base, n; int error = -EACCES; + if ((task->tk_rqstp->rq_rcv_buf.len & 3) != 0) { + /* RFC-1014 says that the representation of XDR data must be a + * multiple of four bytes + * - if it isn't pointer subtraction in the NFS client may give + * undefined results + */ + printk(KERN_WARNING + "call_verify: XDR representation not a multiple of" + " 4 bytes: 0x%x\n", task->tk_rqstp->rq_rcv_buf.len); + goto out_eio; + } if ((len -= 3) < 0) goto out_overflow; p += 1; /* skip XID */ -- cgit v1.2.2 From 16b4289c7460ba9c04af40c574949dcca9029658 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 24 Aug 2006 12:27:15 -0400 Subject: NFSv4: Add v4 exception handling for the ACL functions. This is needed in order to handle any NFS4ERR_DELAY errors that might be returned by the server. It also ensures that we map the NFSv4 errors before they are returned to userland. Signed-off-by: Trond Myklebust (cherry picked from 71c12b3f0abc7501f6ed231a6d17bc9c05a238dc commit) --- fs/nfs/nfs4proc.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index e6ee97f19d81..153898e1331f 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2668,7 +2668,7 @@ out: nfs4_set_cached_acl(inode, acl); } -static inline ssize_t nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t buflen) +static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t buflen) { struct page *pages[NFS4ACL_MAXPAGES]; struct nfs_getaclargs args = { @@ -2721,6 +2721,19 @@ out_free: return ret; } +static ssize_t nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t buflen) +{ + struct nfs4_exception exception = { }; + ssize_t ret; + do { + ret = __nfs4_get_acl_uncached(inode, buf, buflen); + if (ret >= 0) + break; + ret = nfs4_handle_exception(NFS_SERVER(inode), ret, &exception); + } while (exception.retry); + return ret; +} + static ssize_t nfs4_proc_get_acl(struct inode *inode, void *buf, size_t buflen) { struct nfs_server *server = NFS_SERVER(inode); @@ -2737,7 +2750,7 @@ static ssize_t nfs4_proc_get_acl(struct inode *inode, void *buf, size_t buflen) return nfs4_get_acl_uncached(inode, buf, buflen); } -static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen) +static int __nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen) { struct nfs_server *server = NFS_SERVER(inode); struct page *pages[NFS4ACL_MAXPAGES]; @@ -2763,6 +2776,18 @@ static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen return ret; } +static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen) +{ + struct nfs4_exception exception = { }; + int err; + do { + err = nfs4_handle_exception(NFS_SERVER(inode), + __nfs4_proc_set_acl(inode, buf, buflen), + &exception); + } while (exception.retry); + return err; +} + static int nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server) { -- cgit v1.2.2 From a343bb7750e6a098909c34f5c5dfddbc4fa40053 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 22 Aug 2006 20:06:03 -0400 Subject: VFS: Fix access("file", X_OK) in the presence of ACLs Currently, the access() call will return incorrect information on NFS if there exists an ACL that grants execute access to the user on a regular file. The reason the information is incorrect is that the VFS overrides this execute access in open_exec() by checking (inode->i_mode & 0111). This patch propagates the VFS execute bit check back into the generic permission() call. Signed-off-by: Trond Myklebust (cherry picked from 64cbae98848c4c99851cb0a405f0b4982cd76c1e commit) --- fs/namei.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 863166441bf3..432d6bc6fab0 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -227,10 +227,10 @@ int generic_permission(struct inode *inode, int mask, int permission(struct inode *inode, int mask, struct nameidata *nd) { + umode_t mode = inode->i_mode; int retval, submask; if (mask & MAY_WRITE) { - umode_t mode = inode->i_mode; /* * Nobody gets write access to a read-only fs. @@ -247,6 +247,13 @@ int permission(struct inode *inode, int mask, struct nameidata *nd) } + /* + * MAY_EXEC on regular files requires special handling: We override + * filesystem execute permissions if the mode bits aren't set. + */ + if ((mask & MAY_EXEC) && S_ISREG(mode) && !(mode & S_IXUGO)) + return -EACCES; + /* Ordinary permission routines do not understand MAY_APPEND. */ submask = mask & ~MAY_APPEND; if (inode->i_op && inode->i_op->permission) -- cgit v1.2.2 From 9167b0b9a0ab7907191523f5a0528e3b9c288e21 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 22 Aug 2006 20:06:03 -0400 Subject: VFS: Remove redundant open-coded mode bit check in prepare_binfmt(). The check in prepare_binfmt() for inode->i_mode & 0111 is redundant, since open_exec() will already have done that. Signed-off-by: Trond Myklebust (cherry picked from 822dec482ced07af32c378cd936d77345786572b commit) --- fs/exec.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 8344ba73a2a6..a6f64a98ac50 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -922,12 +922,6 @@ int prepare_binprm(struct linux_binprm *bprm) int retval; mode = inode->i_mode; - /* - * Check execute perms again - if the caller has CAP_DAC_OVERRIDE, - * generic_permission lets a non-executable through - */ - if (!(mode & 0111)) /* with at least _one_ execute bit set */ - return -EACCES; if (bprm->file->f_op == NULL) return -EACCES; -- cgit v1.2.2 From a969fd5a4e162c4485ae8f3e49d674656a18fa36 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 22 Aug 2006 20:06:04 -0400 Subject: VFS: Remove redundant open-coded mode bit checks in open_exec(). The check in open_exec() for inode->i_mode & 0111 has been made redundant by the fix to permission(). Signed-off-by: Trond Myklebust (cherry picked from 1d3741c5d991686699f100b65b9956f7ee7ae0ae commit) --- fs/exec.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index a6f64a98ac50..f7aabfeca033 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -486,8 +486,6 @@ struct file *open_exec(const char *name) if (!(nd.mnt->mnt_flags & MNT_NOEXEC) && S_ISREG(inode->i_mode)) { int err = vfs_permission(&nd, MAY_EXEC); - if (!err && !(inode->i_mode & 0111)) - err = -EACCES; file = ERR_PTR(err); if (!err) { file = nameidata_to_filp(&nd, O_RDONLY); -- cgit v1.2.2 From b2155d0417df9f2b4c0d396b6530b864d9f08623 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sat, 19 Aug 2006 00:11:34 -0400 Subject: [SCSI] sg: fix incorrect page problem There's a problem where sg is executing a ->nopage operation on a compound page, it actually calls get_page() on the first page in the compound rather than the page which is being mapped. The fix is to select the correct page by indexing into the compound. Signed-off-by: James Bottomley --- drivers/scsi/sg.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 65eef33846bb..34f9343ed0af 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -18,8 +18,8 @@ * */ -static int sg_version_num = 30533; /* 2 digits for each component */ -#define SG_VERSION_STR "3.5.33" +static int sg_version_num = 30534; /* 2 digits for each component */ +#define SG_VERSION_STR "3.5.34" /* * D. P. Gilbert (dgilbert@interlog.com, dougg@triode.net.au), notes: @@ -60,7 +60,7 @@ static int sg_version_num = 30533; /* 2 digits for each component */ #ifdef CONFIG_SCSI_PROC_FS #include -static char *sg_version_date = "20050908"; +static char *sg_version_date = "20060818"; static int sg_proc_init(void); static void sg_proc_cleanup(void); @@ -1164,7 +1164,7 @@ sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type) len = vma->vm_end - sa; len = (len < sg->length) ? len : sg->length; if (offset < len) { - page = sg->page; + page = virt_to_page(page_address(sg->page) + offset); get_page(page); /* increment page count */ break; } -- cgit v1.2.2 From 9c06938aa458843fb71fa35371f23a3b89317252 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 23 Aug 2006 14:54:54 -0700 Subject: [SCSI] qla2xxx: Correct PLOGI retry logic. Original code attempts to retry PLOGIs to fcports that are FCP_TARGETs only. If the driver never performed a successful PLOGI/PRLI, the port-type would never be assigned, and the relogin logic would silently drop the request (and thus the port would not be recognized and registered). The fix is relatively straightforward, drop the FCP_TARGET-only check. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 1e2b95bac830..65cbe2f5eea2 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2238,9 +2238,6 @@ qla2x00_do_dpc(void *data) next_loopid = 0; list_for_each_entry(fcport, &ha->fcports, list) { - if (fcport->port_type != FCT_TARGET) - continue; - /* * If the port is not ONLINE then try to login * to it if we haven't run out of retries. -- cgit v1.2.2 From 476e8978d9ccacfc911bd42e083dd784ad1465b1 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 23 Aug 2006 14:54:55 -0700 Subject: [SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort. Software must explicitely re-enable extended firmware tracing after any ISP abort condition. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 9758dba95542..859649160caa 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3063,6 +3063,7 @@ qla2x00_update_fcports(scsi_qla_host_t *ha) int qla2x00_abort_isp(scsi_qla_host_t *ha) { + int rval; unsigned long flags = 0; uint16_t cnt; srb_t *sp; @@ -3119,6 +3120,16 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) ha->isp_abort_cnt = 0; clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); + + if (ha->eft) { + rval = qla2x00_trace_control(ha, TC_ENABLE, + ha->eft_dma, EFT_NUM_BUFFERS); + if (rval) { + qla_printk(KERN_WARNING, ha, + "Unable to reinitialize EFT " + "(%d).\n", rval); + } + } } else { /* failed the ISP abort */ ha->flags.online = 1; if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) { -- cgit v1.2.2 From 15a3758dc9e1c9d862e46acdf607de70c302fa6a Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 23 Aug 2006 14:54:56 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.01.07-k1. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index f5826bf04a24..971259032ef7 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,9 +7,9 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.01.05-k4" +#define QLA2XXX_VERSION "8.01.07-k1" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 1 -#define QLA_DRIVER_PATCH_VER 5 +#define QLA_DRIVER_PATCH_VER 7 #define QLA_DRIVER_BETA_VER 0 -- cgit v1.2.2 From 0db99e3359234be181590463184b9959059a9ea9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sat, 26 Aug 2006 03:00:22 -0400 Subject: [SCSI] fix scsi_send_eh_cmnd regression The callers of scsi_send_eh_cmnd are setting the cmnd buffer, and then scsi_send_eh_cmnd is copying that updated buffer to the old_cmnd variable. Then after the command runs, we end up copying that old_cmnd var which has the new cmnd to the scsi command buffer. When this command gets recent, all types of fun things happen like getting TUR or START_STOP commands with data and scatterlists. This patch made against scsi-rc-fixes, has the callers of scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd can do the right thing. This should go into 2.6.18 since this fixes a regression added when we removed some of the scsi_cmnd fields and replaced them with local variables. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 6a5b731bd5ba..a8ed5a22009d 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -460,7 +460,8 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) * Return value: * SUCCESS or FAILED or NEEDS_RETRY **/ -static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense) +static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, + int cmnd_size, int timeout, int copy_sense) { struct scsi_device *sdev = scmd->device; struct Scsi_Host *shost = sdev->host; @@ -490,6 +491,9 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense old_cmd_len = scmd->cmd_len; old_use_sg = scmd->use_sg; + memset(scmd->cmnd, 0, sizeof(scmd->cmnd)); + memcpy(scmd->cmnd, cmnd, cmnd_size); + if (copy_sense) { int gfp_mask = GFP_ATOMIC; @@ -610,8 +614,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) static unsigned char generic_sense[6] = {REQUEST_SENSE, 0, 0, 0, 252, 0}; - memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense)); - return scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 1); + return scsi_send_eh_cmnd(scmd, generic_sense, 6, SENSE_TIMEOUT, 1); } /** @@ -736,10 +739,7 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd) int retry_cnt = 1, rtn; retry_tur: - memcpy(scmd->cmnd, tur_command, sizeof(tur_command)); - - - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 0); + rtn = scsi_send_eh_cmnd(scmd, tur_command, 6, SENSE_TIMEOUT, 0); SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n", __FUNCTION__, scmd, rtn)); @@ -839,8 +839,8 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) if (scmd->device->allow_restart) { int rtn; - memcpy(scmd->cmnd, stu_command, sizeof(stu_command)); - rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT, 0); + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, + START_UNIT_TIMEOUT, 0); if (rtn == SUCCESS) return 0; } -- cgit v1.2.2 From 4801bc25f37a969ea773c24d12fd4738541848a1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 11 Aug 2006 22:53:08 +0200 Subject: [PATCH] i2c: tps65010 build fixes The tps65010.c driver in the main tree never got updated with build fixes since the last batch of I2C driver changes; and the genirq trigger flags were updated wierdly too. This also includes a minor tweak to reduce the frequency used to poll for unplug-the-AC-power on the TPS chips that don't provide relevant IRQs. It _would_ be nice to sense whether there's even a battery, but that'd normally be an HDQ/1-wire interface to a smart battery, and such APIs aren't standardized. Signed-off-by: David Brownell Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/tps65010.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index e7e27049fbfa..0be6fd6a267d 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -43,13 +43,12 @@ /*-------------------------------------------------------------------------*/ #define DRIVER_VERSION "2 May 2005" -#define DRIVER_NAME (tps65010_driver.name) +#define DRIVER_NAME (tps65010_driver.driver.name) MODULE_DESCRIPTION("TPS6501x Power Management Driver"); MODULE_LICENSE("GPL"); static unsigned short normal_i2c[] = { 0x48, /* 0x49, */ I2C_CLIENT_END }; -static unsigned short normal_i2c_range[] = { I2C_CLIENT_END }; I2C_CLIENT_INSMOD; @@ -100,7 +99,7 @@ struct tps65010 { /* not currently tracking GPIO state */ }; -#define POWER_POLL_DELAY msecs_to_jiffies(800) +#define POWER_POLL_DELAY msecs_to_jiffies(5000) /*-------------------------------------------------------------------------*/ @@ -520,8 +519,11 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) goto fail1; } + /* the IRQ is active low, but many gpio lines can't support that + * so this driver can use falling-edge triggers instead. + */ + irqflags = IRQF_SAMPLE_RANDOM; #ifdef CONFIG_ARM - irqflags = IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_LOW; if (machine_is_omap_h2()) { tps->model = TPS65010; omap_cfg_reg(W4_GPIO58); @@ -543,8 +545,6 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) // FIXME set up this board's IRQ ... } -#else - irqflags = IRQF_SAMPLE_RANDOM; #endif if (tps->irq > 0) { -- cgit v1.2.2 From faf9b616325430422fa13fead88ca7843eb249d6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Aug 2006 10:24:20 +0200 Subject: [PATCH] hwmon: abituguru timeout fixes This patch contains 2 sets of fixes for the abituguru: 1) Much improved timeout handling, drasticly reducing the amount of timeout errors on some motherboards 2) Fix the exit paths in the bank1 sensor type detect code to always restore the original settings even on an error. Without this our special test settings could remain seriously confusing the system BIOS's setup menu. Both are very much related and are must haves, to avoid messing up the uguru CMOS settings. Detailed changes: - Much improved timeout / wait for status handling. Many thanks to Sunil Kumar, for all his testing, ideas and patches! The code now first busy waits, polling the uguru for the expected status as this usually succeeds pretty quickly (within 90 reads). To avoid unnecessary CPU burn in timeout conditions, the amount of busy waiting has been halved from previous versions (120 tries instead of 250). This is not a problem, because this version goes to sleep after 120 attemps for 1 jiffy and then tries again, it does this sleep and try again 5 times before finally giving up. This (almost?) completly removes the timeout errors some people have seen regulary. Apparently some older uguru versions sometimes are distracted for a (relatively) long time. This solves this. - These timeout errors not only occur in the sending address part of reading the uguru but also in the wait for read state, so errors in this state are now handled as retryable just like send address state errors and are only logged and reported to userspace if 3 executive tries fail. - Fix a very nasty bug in the bank1 sensor type detection code, where it would not restore the original settings in any of the error paths! - Since not successfully restoring the original settings can seriously confuse the system BIOS (hang when entering the relevant setup menu), we now try restoring them 3 times before giving up. Signed-off-by: Hans de Goede Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/abituguru.c | 99 +++++++++++++++++++++++++++++------------------ 1 file changed, 61 insertions(+), 38 deletions(-) diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index cc15c4f2e9ec..35ad1b032726 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -64,17 +65,17 @@ #define ABIT_UGURU_IN_SENSOR 0 #define ABIT_UGURU_TEMP_SENSOR 1 #define ABIT_UGURU_NC 2 -/* Timeouts / Retries, if these turn out to need a lot of fiddling we could - convert them to params. */ -/* 250 was determined by trial and error, 200 works most of the time, but not - always. I assume this is cpu-speed independent, since the ISA-bus and not - the CPU should be the bottleneck. Note that 250 sometimes is still not - enough (only reported on AN7 mb) this is handled by a higher layer. */ -#define ABIT_UGURU_WAIT_TIMEOUT 250 +/* In many cases we need to wait for the uGuru to reach a certain status, most + of the time it will reach this status within 30 - 90 ISA reads, and thus we + can best busy wait. This define gives the total amount of reads to try. */ +#define ABIT_UGURU_WAIT_TIMEOUT 125 +/* However sometimes older versions of the uGuru seem to be distracted and they + do not respond for a long time. To handle this we sleep before each of the + last ABIT_UGURU_WAIT_TIMEOUT_SLEEP tries. */ +#define ABIT_UGURU_WAIT_TIMEOUT_SLEEP 5 /* Normally all expected status in abituguru_ready, are reported after the - first read, but sometimes not and we need to poll, 5 polls was not enough - 50 sofar is. */ -#define ABIT_UGURU_READY_TIMEOUT 50 + first read, but sometimes not and we need to poll. */ +#define ABIT_UGURU_READY_TIMEOUT 5 /* Maximum 3 retries on timedout reads/writes, delay 200 ms before retrying */ #define ABIT_UGURU_MAX_RETRIES 3 #define ABIT_UGURU_RETRY_DELAY (HZ/5) @@ -226,6 +227,10 @@ static int abituguru_wait(struct abituguru_data *data, u8 state) timeout--; if (timeout == 0) return -EBUSY; + /* sleep a bit before our last few tries, see the comment on + this where ABIT_UGURU_WAIT_TIMEOUT_SLEEP is defined. */ + if (timeout <= ABIT_UGURU_WAIT_TIMEOUT_SLEEP) + msleep(0); } return 0; } @@ -256,6 +261,7 @@ static int abituguru_ready(struct abituguru_data *data) "CMD reg does not hold 0xAC after ready command\n"); return -EIO; } + msleep(0); } /* After this the ABIT_UGURU_DATA port should contain @@ -268,6 +274,7 @@ static int abituguru_ready(struct abituguru_data *data) "state != more input after ready command\n"); return -EIO; } + msleep(0); } data->uguru_ready = 1; @@ -331,7 +338,8 @@ static int abituguru_read(struct abituguru_data *data, /* And read the data */ for (i = 0; i < count; i++) { if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) { - ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for " + ABIT_UGURU_DEBUG(retries ? 1 : 3, + "timeout exceeded waiting for " "read state (bank: %d, sensor: %d)\n", (int)bank_addr, (int)sensor_addr); break; @@ -350,7 +358,9 @@ static int abituguru_read(struct abituguru_data *data, static int abituguru_write(struct abituguru_data *data, u8 bank_addr, u8 sensor_addr, u8 *buf, int count) { - int i; + /* We use the ready timeout as we have to wait for 0xAC just like the + ready function */ + int i, timeout = ABIT_UGURU_READY_TIMEOUT; /* Send the address */ i = abituguru_send_address(data, bank_addr, sensor_addr, @@ -370,7 +380,8 @@ static int abituguru_write(struct abituguru_data *data, } /* Now we need to wait till the chip is ready to be read again, - don't ask why */ + so that we can read 0xAC as confirmation that our write has + succeeded. */ if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) { ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for read state " "after write (bank: %d, sensor: %d)\n", (int)bank_addr, @@ -379,11 +390,15 @@ static int abituguru_write(struct abituguru_data *data, } /* Cmd port MUST be read now and should contain 0xAC */ - if (inb_p(data->addr + ABIT_UGURU_CMD) != 0xAC) { - ABIT_UGURU_DEBUG(1, "CMD reg does not hold 0xAC after write " - "(bank: %d, sensor: %d)\n", (int)bank_addr, - (int)sensor_addr); - return -EIO; + while (inb_p(data->addr + ABIT_UGURU_CMD) != 0xAC) { + timeout--; + if (timeout == 0) { + ABIT_UGURU_DEBUG(1, "CMD reg does not hold 0xAC after " + "write (bank: %d, sensor: %d)\n", + (int)bank_addr, (int)sensor_addr); + return -EIO; + } + msleep(0); } /* Last put the chip back in ready state */ @@ -403,7 +418,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, u8 sensor_addr) { u8 val, buf[3]; - int ret = ABIT_UGURU_NC; + int i, ret = -ENODEV; /* error is the most common used retval :| */ /* If overriden by the user return the user selected type */ if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR && @@ -439,7 +454,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, buf[2] = 250; if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, buf, 3) != 3) - return -ENODEV; + goto abituguru_detect_bank1_sensor_type_exit; /* Now we need 20 ms to give the uguru time to read the sensors and raise a voltage alarm */ set_current_state(TASK_UNINTERRUPTIBLE); @@ -447,21 +462,16 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, /* Check for alarm and check the alarm is a volt low alarm. */ if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, buf, 3, ABIT_UGURU_MAX_RETRIES) != 3) - return -ENODEV; + goto abituguru_detect_bank1_sensor_type_exit; if (buf[sensor_addr/8] & (0x01 << (sensor_addr % 8))) { if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1, sensor_addr, buf, 3, ABIT_UGURU_MAX_RETRIES) != 3) - return -ENODEV; + goto abituguru_detect_bank1_sensor_type_exit; if (buf[0] & ABIT_UGURU_VOLT_LOW_ALARM_FLAG) { - /* Restore original settings */ - if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, - sensor_addr, - data->bank1_settings[sensor_addr], - 3) != 3) - return -ENODEV; ABIT_UGURU_DEBUG(2, " found volt sensor\n"); - return ABIT_UGURU_IN_SENSOR; + ret = ABIT_UGURU_IN_SENSOR; + goto abituguru_detect_bank1_sensor_type_exit; } else ABIT_UGURU_DEBUG(2, " alarm raised during volt " "sensor test, but volt low flag not set\n"); @@ -477,7 +487,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, buf[2] = 10; if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, buf, 3) != 3) - return -ENODEV; + goto abituguru_detect_bank1_sensor_type_exit; /* Now we need 50 ms to give the uguru time to read the sensors and raise a temp alarm */ set_current_state(TASK_UNINTERRUPTIBLE); @@ -485,15 +495,16 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, /* Check for alarm and check the alarm is a temp high alarm. */ if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, buf, 3, ABIT_UGURU_MAX_RETRIES) != 3) - return -ENODEV; + goto abituguru_detect_bank1_sensor_type_exit; if (buf[sensor_addr/8] & (0x01 << (sensor_addr % 8))) { if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1, sensor_addr, buf, 3, ABIT_UGURU_MAX_RETRIES) != 3) - return -ENODEV; + goto abituguru_detect_bank1_sensor_type_exit; if (buf[0] & ABIT_UGURU_TEMP_HIGH_ALARM_FLAG) { - ret = ABIT_UGURU_TEMP_SENSOR; ABIT_UGURU_DEBUG(2, " found temp sensor\n"); + ret = ABIT_UGURU_TEMP_SENSOR; + goto abituguru_detect_bank1_sensor_type_exit; } else ABIT_UGURU_DEBUG(2, " alarm raised during temp " "sensor test, but temp high flag not set\n"); @@ -501,11 +512,23 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, ABIT_UGURU_DEBUG(2, " alarm not raised during temp sensor " "test\n"); - /* Restore original settings */ - if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, - data->bank1_settings[sensor_addr], 3) != 3) + ret = ABIT_UGURU_NC; +abituguru_detect_bank1_sensor_type_exit: + /* Restore original settings, failing here is really BAD, it has been + reported that some BIOS-es hang when entering the uGuru menu with + invalid settings present in the uGuru, so we try this 3 times. */ + for (i = 0; i < 3; i++) + if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, + sensor_addr, data->bank1_settings[sensor_addr], + 3) == 3) + break; + if (i == 3) { + printk(KERN_ERR ABIT_UGURU_NAME + ": Fatal error could not restore original settings. " + "This should never happen please report this to the " + "abituguru maintainer (see MAINTAINERS)\n"); return -ENODEV; - + } return ret; } @@ -1305,7 +1328,7 @@ static struct abituguru_data *abituguru_update_device(struct device *dev) data->update_timeouts = 0; LEAVE_UPDATE: /* handle timeout condition */ - if (err == -EBUSY) { + if (!success && (err == -EBUSY || err >= 0)) { /* No overflow please */ if (data->update_timeouts < 255u) data->update_timeouts++; -- cgit v1.2.2 From 954c0b7cd5b9aaa11fb67a0c011fcb5e5897385a Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Tue, 22 Aug 2006 07:29:08 -0700 Subject: [PATCH] PCI: use PCBIOS as last fallback there was a change in 2.6.17 which affected the order in which the PCI access methods are probed. this gives regressions on some machines with broken BIOS. the problem is that PCBIOS sometimes reports last bus wrong, leaving cardbus non-funcational. previously those system worked fine with direct access. The patch changes the PCI init code to have PCBIOS as last fallback, yet the PCBIOS code still has to run first to set pcibios_last_bus to the value reported by the BIOS. this is needed in case legacy PCI probing (arch/i386/pci/legacy.c) is used to detect peer busses. using direct access if available fixes the cardbus problems. Signed-off-by: Daniel Ritz Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/init.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c index c7650a7e0b07..51087a9d9172 100644 --- a/arch/i386/pci/init.c +++ b/arch/i386/pci/init.c @@ -14,8 +14,12 @@ static __init int pci_access_init(void) #ifdef CONFIG_PCI_BIOS pci_pcbios_init(); #endif - if (raw_pci_ops) - return 0; + /* + * don't check for raw_pci_ops here because we want pcbios as last + * fallback, yet it's needed to run first to set pcibios_last_bus + * in case legacy PCI probing is used. otherwise detecting peer busses + * fails. + */ #ifdef CONFIG_PCI_DIRECT pci_direct_init(); #endif -- cgit v1.2.2 From fd4dc27cff15f77cde218613baa36b855c85ad9f Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Tue, 22 Aug 2006 07:29:09 -0700 Subject: [PATCH] PCI: i386 mmconfig: don't forget bus number when setting fallback_slots bits On i386 PCI mmconfig forgets the bus number when setting the fallback_slots bits which means fallback to conf1 only works for bus 0. Signed-off-by: Daniel Ritz Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/mmconfig.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index e545b0992c48..972180f738d9 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -178,7 +178,7 @@ static __init void unreachable_devices(void) pci_exp_set_dev_base(addr, k, PCI_DEVFN(i, 0)); if (addr == 0 || readl((u32 __iomem *)mmcfg_virt_addr) != val1) { - set_bit(i, fallback_slots); + set_bit(i + 32*k, fallback_slots); printk(KERN_NOTICE "PCI: No mmconfig possible on %x:%x\n", k, i); } -- cgit v1.2.2 From 65ae4dddbb56c7415c31e9aae0b3811cb583bbea Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Tue, 22 Aug 2006 07:29:10 -0700 Subject: [PATCH] PCI: fix ICH6 quirks - add the ICH6(R) LPC to the ICH6 ACPI quirks. currently only the ICH6-M is handled. [ PCI_DEVICE_ID_INTEL_ICH6_1 is the ICH6-M LPC, ICH6_0 is the ICH6(R) ] - remove the wrong quirk calling asus_hides_smbus_lpc() for ICH6. the register modified in asus_hides_smbus_lpc() has a different meaning in ICH6. Signed-off-by: Daniel Ritz Acked-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 04618d4d7d74..73177429fe74 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -438,6 +438,7 @@ static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev) pci_read_config_dword(dev, 0x48, ®ion); quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO"); } +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi ); /* @@ -1091,7 +1092,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asu DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc ); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc ); static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev) { -- cgit v1.2.2 From cc702c2c5e5ab51e1b0d3386d447e7b1772879ee Mon Sep 17 00:00:00 2001 From: Scott Murray Date: Tue, 22 Aug 2006 19:55:57 -0400 Subject: [PATCH] CPCI hotplug: fix resource assignment Here is a patch against the CPCI hotplug core to fix up PCI resource assignment such that things will actually work when a hot inserted device is enabled. I mentioned this patch to you way back in April at ELC, but am only now out from under things enough to clean it up and submit it. I've basically cribbed the corresponding code from shpchp_pci.c, so there are no big surprises. If it's still possible, I wouldn't mind this going into 2.6.18, but it wouldn't be the end of the world if it went into 2.6.19. Signed-off-by: Scott Murray Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/cpci_hotplug_pci.c | 54 ++++++++++++++++++++++++++-------- 1 file changed, 42 insertions(+), 12 deletions(-) diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 02be74caa89f..4afcaffd031c 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -254,8 +254,8 @@ int cpci_led_off(struct slot* slot) int cpci_configure_slot(struct slot* slot) { - unsigned char busnr; - struct pci_bus *child; + struct pci_bus *parent; + int fn; dbg("%s - enter", __FUNCTION__); @@ -276,23 +276,53 @@ int cpci_configure_slot(struct slot* slot) */ n = pci_scan_slot(slot->bus, slot->devfn); dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n); - if (n > 0) - pci_bus_add_devices(slot->bus); slot->dev = pci_get_slot(slot->bus, slot->devfn); if (slot->dev == NULL) { err("Could not find PCI device for slot %02x", slot->number); - return 1; + return -ENODEV; } } - - if (slot->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - pci_read_config_byte(slot->dev, PCI_SECONDARY_BUS, &busnr); - child = pci_add_new_bus(slot->dev->bus, slot->dev, busnr); - pci_do_scan_bus(child); - pci_bus_size_bridges(child); + parent = slot->dev->bus; + + for (fn = 0; fn < 8; fn++) { + struct pci_dev *dev; + + dev = pci_get_slot(parent, PCI_DEVFN(PCI_SLOT(slot->devfn), fn)); + if (!dev) + continue; + if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) || + (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) { + /* Find an unused bus number for the new bridge */ + struct pci_bus *child; + unsigned char busnr, start = parent->secondary; + unsigned char end = parent->subordinate; + + for (busnr = start; busnr <= end; busnr++) { + if (!pci_find_bus(pci_domain_nr(parent), + busnr)) + break; + } + if (busnr >= end) { + err("No free bus for hot-added bridge\n"); + pci_dev_put(dev); + continue; + } + child = pci_add_new_bus(parent, dev, busnr); + if (!child) { + err("Cannot add new bus for %s\n", + pci_name(dev)); + pci_dev_put(dev); + continue; + } + child->subordinate = pci_do_scan_bus(child); + pci_bus_size_bridges(child); + } + pci_dev_put(dev); } - pci_bus_assign_resources(slot->dev->bus); + pci_bus_assign_resources(parent); + pci_bus_add_devices(parent); + pci_enable_bridges(parent); dbg("%s - exit", __FUNCTION__); return 0; -- cgit v1.2.2 From 39ba487fe22a63b3df7c543c82d01db0f0fed700 Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Tue, 15 Aug 2006 10:57:16 +0200 Subject: [PATCH] PCI: kerneldoc correction in pci-driver Removes an unused kerneldoc entry from pci_match_device and put the others into correct order. Signed-off-by: Henrik Kretzschmar Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci-driver.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 10e1a905c144..474e9cd0e9e4 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -139,9 +139,8 @@ const struct pci_device_id *pci_match_id(const struct pci_device_id *ids, /** * pci_match_device - Tell if a PCI device structure has a matching * PCI device id structure - * @ids: array of PCI device id structures to search in - * @dev: the PCI device structure to match against * @drv: the PCI driver to match against + * @dev: the PCI device structure to match against * * Used by a driver to check whether a PCI device present in the * system is in its list of supported devices. Returns the matching -- cgit v1.2.2 From b93b58eea81beacac55770dd39e34fbffdc36000 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 14 Aug 2006 17:32:51 -0700 Subject: [PATCH] USB: fix bug in cypress_cy7c63.c driver This was pointed out by Adrian Bunk , as found by the Coverity Checker. Cc: Adrian Bunk Cc: Oliver Bock Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/cypress_cy7c63.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index a4062a6adbb8..9c46746d5d00 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -208,7 +208,7 @@ static int cypress_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { - dev_err(&dev->udev->dev, "Out of memory!\n"); + dev_err(&interface->dev, "Out of memory!\n"); goto error; } -- cgit v1.2.2 From be729523369ec7825bde4a0e774ee7932e9d3dff Mon Sep 17 00:00:00 2001 From: Tomasz Kazmierczak Date: Fri, 18 Aug 2006 23:43:29 +0200 Subject: [PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cable This patch removes support for a clone of Nokia DKU-5 cable made by Ours Technology Inc, as it turned out that the cable does not use the pl2303 chip, but OTI-6858 chip which is not compatible with the pl2303. Signed-off-by: Tomasz Kazmierczak Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 1 - drivers/usb/serial/pl2303.h | 4 ---- 2 files changed, 5 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index efbbc0adb89a..65e4d046951a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -79,7 +79,6 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) }, { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) }, { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, - { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) }, { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, { } /* Terminating entry */ diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index a692ac66ca6c..55195e76eb6f 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -82,10 +82,6 @@ #define SPEEDDRAGON_VENDOR_ID 0x0e55 #define SPEEDDRAGON_PRODUCT_ID 0x110b -/* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */ -#define OTI_VENDOR_ID 0x0ea0 -#define OTI_PRODUCT_ID 0x6858 - /* DATAPILOT Universal-2 Phone Cable */ #define DATAPILOT_U2_VENDOR_ID 0x0731 #define DATAPILOT_U2_PRODUCT_ID 0x2003 -- cgit v1.2.2 From 94918ff68a7c78fdd3241d13e18444ef80b8ff4a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 14 Aug 2006 11:40:46 -0400 Subject: [PATCH] unusual_devs update for UCR-61S2B The existing unusual_devs entry for the UCR-61S2B appears to have too wide a revision range. It matches at least one device that doesn't respond to the initialization sequence. Perhaps the sequence needs to be updated, or perhaps something else can be done. For now, this patch (as764) restricts the range to include only the revision mentioned in the original comment. This resolves (for now!) Bugzilla entry #6950. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fd158e063c06..4a803d69fa36 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1261,7 +1261,7 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, * Tested on hardware version 1.10. * Entry is needed only for the initializer function override. */ -UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999, +UNUSUAL_DEV( 0x1019, 0x0c55, 0x0110, 0x0110, "Desknote", "UCR-61S2B", US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, -- cgit v1.2.2 From a23b423ec0573ead85e2c92f2a5df5d4bf47e26b Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 25 Aug 2006 00:46:02 -0700 Subject: [SPARC]: enabling of the 2nd CPU in 2.6.18-rc4 smp_setup_cpu_possible_map() needs to run after paging_init() so that the in-kernel device tree is setup. Signed-off-by: Krzysztof Helt Signed-off-by: David S. Miller --- arch/sparc/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c index 35488d6c7457..0251cab4708b 100644 --- a/arch/sparc/kernel/setup.c +++ b/arch/sparc/kernel/setup.c @@ -348,9 +348,9 @@ void __init setup_arch(char **cmdline_p) init_mm.context = (unsigned long) NO_CONTEXT; init_task.thread.kregs = &fake_swapper_regs; - smp_setup_cpu_possible_map(); - paging_init(); + + smp_setup_cpu_possible_map(); } static int __init set_preferred_console(void) -- cgit v1.2.2 From 5fec811e99bb6f537e67b6bcbe9fe6505aa8a114 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 25 Aug 2006 16:22:21 -0700 Subject: [SPARC]: Small smp cleanup. It moves the smp_procesors_ready variable to sun4d_smp.c only. Signed-off-by: Krzysztof Helt (krzysztof.h1@wp.pl) Signed-off-by: David S. Miller --- arch/sparc/kernel/smp.c | 1 - arch/sparc/kernel/sun4d_smp.c | 2 +- arch/sparc/kernel/sun4m_smp.c | 2 -- 3 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c index e311ade1b490..276f22881d0f 100644 --- a/arch/sparc/kernel/smp.c +++ b/arch/sparc/kernel/smp.c @@ -34,7 +34,6 @@ #include #include -volatile int smp_processors_ready = 0; int smp_num_cpus = 1; volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,}; unsigned char boot_cpu_id = 0; diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index ba843f6a2832..3ff4edd32815 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -42,7 +42,7 @@ extern ctxd_t *srmmu_ctx_table_phys; extern void calibrate_delay(void); -extern volatile int smp_processors_ready; +static volatile int smp_processors_ready = 0; static int smp_highest_cpu; extern volatile unsigned long cpu_callin_map[NR_CPUS]; extern cpuinfo_sparc cpu_data[NR_CPUS]; diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 3b32096134aa..7d4a649138f6 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -39,7 +39,6 @@ extern ctxd_t *srmmu_ctx_table_phys; extern void calibrate_delay(void); -extern volatile int smp_processors_ready; extern volatile unsigned long cpu_callin_map[NR_CPUS]; extern unsigned char boot_cpu_id; @@ -217,7 +216,6 @@ void __init smp4m_smp_done(void) } /* Ok, they are spinning and ready to go. */ - smp_processors_ready = 1; } /* At each hardware IRQ, we get this called to forward IRQ reception -- cgit v1.2.2 From 81a42d298d8bd1b96be4bd459494f25fdd99b594 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 25 Aug 2006 15:58:57 -0700 Subject: [DISKLABEL] SUN: Fix signed int usage for sector count The current sun disklabel code uses a signed int for the sector count. When partitions larger than 1 TB are used, the cast to a sector_t causes the partition sizes to be invalid: # cat /proc/paritions | grep sdan 66 112 2146435072 sdan 66 115 9223372036853660736 sdan3 66 120 9223372036853660736 sdan8 This patch switches the sector count to an unsigned int to fix this. Signed-off-by: Jeff Mahoney Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- fs/partitions/sun.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/partitions/sun.c b/fs/partitions/sun.c index abe91ca03edf..0a5927c806ca 100644 --- a/fs/partitions/sun.c +++ b/fs/partitions/sun.c @@ -74,7 +74,7 @@ int sun_partition(struct parsed_partitions *state, struct block_device *bdev) spc = be16_to_cpu(label->ntrks) * be16_to_cpu(label->nsect); for (i = 0; i < 8; i++, p++) { unsigned long st_sector; - int num_sectors; + unsigned int num_sectors; st_sector = be32_to_cpu(p->start_cylinder) * spc; num_sectors = be32_to_cpu(p->num_sectors); -- cgit v1.2.2 From 897522ea1c20691b6a65f32f03ae4e77e508b31c Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 25 Aug 2006 00:52:06 -0700 Subject: [CONNECTOR]: Add userspace example code into Documentation/connector/ I was asked several times to include userspace example code into Documentation, so if there is no policy against it, consider attached patch for 2.6.18. This program works with included Documentation/connector/cn_test.c connector module. Signed-off-by: Evgeniy Polyakov Signed-off-by: David S. Miller --- Documentation/connector/ucon.c | 206 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100644 Documentation/connector/ucon.c diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c new file mode 100644 index 000000000000..d738cde2a8d5 --- /dev/null +++ b/Documentation/connector/ucon.c @@ -0,0 +1,206 @@ +/* + * ucon.c + * + * Copyright (c) 2004+ Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include +#include +#include +#include + +#include + +#define DEBUG +#define NETLINK_CONNECTOR 11 + +#ifdef DEBUG +#define ulog(f, a...) fprintf(stdout, f, ##a) +#else +#define ulog(f, a...) do {} while (0) +#endif + +static int need_exit; +static __u32 seq; + +static int netlink_send(int s, struct cn_msg *msg) +{ + struct nlmsghdr *nlh; + unsigned int size; + int err; + char buf[128]; + struct cn_msg *m; + + size = NLMSG_SPACE(sizeof(struct cn_msg) + msg->len); + + nlh = (struct nlmsghdr *)buf; + nlh->nlmsg_seq = seq++; + nlh->nlmsg_pid = getpid(); + nlh->nlmsg_type = NLMSG_DONE; + nlh->nlmsg_len = NLMSG_LENGTH(size - sizeof(*nlh)); + nlh->nlmsg_flags = 0; + + m = NLMSG_DATA(nlh); +#if 0 + ulog("%s: [%08x.%08x] len=%u, seq=%u, ack=%u.\n", + __func__, msg->id.idx, msg->id.val, msg->len, msg->seq, msg->ack); +#endif + memcpy(m, msg, sizeof(*m) + msg->len); + + err = send(s, nlh, size, 0); + if (err == -1) + ulog("Failed to send: %s [%d].\n", + strerror(errno), errno); + + return err; +} + +int main(int argc, char *argv[]) +{ + int s; + char buf[1024]; + int len; + struct nlmsghdr *reply; + struct sockaddr_nl l_local; + struct cn_msg *data; + FILE *out; + time_t tm; + struct pollfd pfd; + + if (argc < 2) + out = stdout; + else { + out = fopen(argv[1], "a+"); + if (!out) { + ulog("Unable to open %s for writing: %s\n", + argv[1], strerror(errno)); + out = stdout; + } + } + + memset(buf, 0, sizeof(buf)); + + s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); + if (s == -1) { + perror("socket"); + return -1; + } + + l_local.nl_family = AF_NETLINK; + l_local.nl_groups = 0x123; /* bitmask of requested groups */ + l_local.nl_pid = 0; + + if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) { + perror("bind"); + close(s); + return -1; + } + +#if 0 + { + int on = 0x57; /* Additional group number */ + setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on)); + } +#endif + if (0) { + int i, j; + + memset(buf, 0, sizeof(buf)); + + data = (struct cn_msg *)buf; + + data->id.idx = 0x123; + data->id.val = 0x456; + data->seq = seq++; + data->ack = 0; + data->len = 0; + + for (j=0; j<10; ++j) { + for (i=0; i<1000; ++i) { + len = netlink_send(s, data); + } + + ulog("%d messages have been sent to %08x.%08x.\n", i, data->id.idx, data->id.val); + } + + return 0; + } + + + pfd.fd = s; + + while (!need_exit) { + pfd.events = POLLIN; + pfd.revents = 0; + switch (poll(&pfd, 1, -1)) { + case 0: + need_exit = 1; + break; + case -1: + if (errno != EINTR) { + need_exit = 1; + break; + } + continue; + } + if (need_exit) + break; + + memset(buf, 0, sizeof(buf)); + len = recv(s, buf, sizeof(buf), 0); + if (len == -1) { + perror("recv buf"); + close(s); + return -1; + } + reply = (struct nlmsghdr *)buf; + + switch (reply->nlmsg_type) { + case NLMSG_ERROR: + fprintf(out, "Error message received.\n"); + fflush(out); + break; + case NLMSG_DONE: + data = (struct cn_msg *)NLMSG_DATA(reply); + + time(&tm); + fprintf(out, "%.24s : [%x.%x] [%08u.%08u].\n", + ctime(&tm), data->id.idx, data->id.val, data->seq, data->ack); + fflush(out); + break; + default: + break; + } + } + + close(s); + return 0; +} -- cgit v1.2.2 From 59eed279c5daa88d95e429782ddb8ef87e52c44b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 25 Aug 2006 15:55:43 -0700 Subject: [IPV6]: Segmentation offload not set correctly on TCP children TCP over IPV6 would incorrectly inherit the GSO settings. This would cause kernel to send Tcp Segmentation Offload packets for IPV6 data to devices that can't handle it. It caused the sky2 driver to lock http://bugzilla.kernel.org/show_bug.cgi?id=7050 and the e1000 would generate bogus packets. I can't blame the hardware for gagging if the upper layers feed it garbage. This was a new bug in 2.6.18 introduced with GSO support. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index b843a650be71..802a1a6b1037 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -944,7 +944,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb, * comment in that function for the gory details. -acme */ - sk->sk_gso_type = SKB_GSO_TCPV6; + newsk->sk_gso_type = SKB_GSO_TCPV6; __ip6_dst_store(newsk, dst, NULL); newtcp6sk = (struct tcp6_sock *)newsk; -- cgit v1.2.2 From f3166c07175c1639687288006aeabed363a921f3 Mon Sep 17 00:00:00 2001 From: Ian McDonald Date: Sat, 26 Aug 2006 19:01:03 -0700 Subject: [DCCP]: Fix typo This fixes a small typo in net/dccp/libs/packet_history.c Signed off by: Ian McDonald Signed-off-by: David S. Miller --- net/dccp/ccids/lib/packet_history.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/dccp/ccids/lib/packet_history.c b/net/dccp/ccids/lib/packet_history.c index ad98d6a322eb..6739be1681c9 100644 --- a/net/dccp/ccids/lib/packet_history.c +++ b/net/dccp/ccids/lib/packet_history.c @@ -1,5 +1,5 @@ /* - * net/dccp/packet_history.h + * net/dccp/packet_history.c * * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. * -- cgit v1.2.2 From e6bccd357343e98db9e1fd0d487f4f924e1a7921 Mon Sep 17 00:00:00 2001 From: Ian McDonald Date: Sat, 26 Aug 2006 19:01:30 -0700 Subject: [DCCP]: Update contact details and copyright Just updating copyright and contacts Signed off by: Ian McDonald Signed-off-by: David S. Miller --- CREDITS | 2 +- net/dccp/ccids/ccid3.c | 4 ++-- net/dccp/ccids/ccid3.h | 4 ++-- net/dccp/ccids/lib/loss_interval.c | 2 +- net/dccp/ccids/lib/loss_interval.h | 2 +- net/dccp/ccids/lib/packet_history.c | 6 +++--- net/dccp/ccids/lib/packet_history.h | 4 ++-- net/dccp/ccids/lib/tfrc.h | 2 +- net/dccp/ccids/lib/tfrc_equation.c | 2 +- net/dccp/dccp.h | 2 +- net/dccp/options.c | 2 +- 11 files changed, 16 insertions(+), 16 deletions(-) diff --git a/CREDITS b/CREDITS index 29be6d1fdf49..0fe904ebb7c7 100644 --- a/CREDITS +++ b/CREDITS @@ -2209,7 +2209,7 @@ S: (address available on request) S: USA N: Ian McDonald -E: iam4@cs.waikato.ac.nz +E: ian.mcdonald@jandi.co.nz E: imcdnzl@gmail.com W: http://wand.net.nz/~iam4 W: http://imcdnzl.blogspot.com diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index c39bff706cfc..0f85970ee6d1 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -2,7 +2,7 @@ * net/dccp/ccids/ccid3.c * * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. - * Copyright (c) 2005-6 Ian McDonald + * Copyright (c) 2005-6 Ian McDonald * * An implementation of the DCCP protocol * @@ -1230,7 +1230,7 @@ static __exit void ccid3_module_exit(void) } module_exit(ccid3_module_exit); -MODULE_AUTHOR("Ian McDonald , " +MODULE_AUTHOR("Ian McDonald , " "Arnaldo Carvalho de Melo "); MODULE_DESCRIPTION("DCCP TFRC CCID3 CCID"); MODULE_LICENSE("GPL"); diff --git a/net/dccp/ccids/ccid3.h b/net/dccp/ccids/ccid3.h index 5ade4f668b22..22cb9f80a09d 100644 --- a/net/dccp/ccids/ccid3.h +++ b/net/dccp/ccids/ccid3.h @@ -1,13 +1,13 @@ /* * net/dccp/ccids/ccid3.h * - * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. + * Copyright (c) 2005-6 The University of Waikato, Hamilton, New Zealand. * * An implementation of the DCCP protocol * * This code has been developed by the University of Waikato WAND * research group. For further information please see http://www.wand.net.nz/ - * or e-mail Ian McDonald - iam4@cs.waikato.ac.nz + * or e-mail Ian McDonald - ian.mcdonald@jandi.co.nz * * This code also uses code from Lulea University, rereleased as GPL by its * authors: diff --git a/net/dccp/ccids/lib/loss_interval.c b/net/dccp/ccids/lib/loss_interval.c index 5d7b7d864385..b93d9fc98cb8 100644 --- a/net/dccp/ccids/lib/loss_interval.c +++ b/net/dccp/ccids/lib/loss_interval.c @@ -2,7 +2,7 @@ * net/dccp/ccids/lib/loss_interval.c * * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. - * Copyright (c) 2005 Ian McDonald + * Copyright (c) 2005-6 Ian McDonald * Copyright (c) 2005 Arnaldo Carvalho de Melo * * This program is free software; you can redistribute it and/or modify diff --git a/net/dccp/ccids/lib/loss_interval.h b/net/dccp/ccids/lib/loss_interval.h index 43bf78269d1d..dcb370a53f57 100644 --- a/net/dccp/ccids/lib/loss_interval.h +++ b/net/dccp/ccids/lib/loss_interval.h @@ -4,7 +4,7 @@ * net/dccp/ccids/lib/loss_interval.h * * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. - * Copyright (c) 2005 Ian McDonald + * Copyright (c) 2005 Ian McDonald * Copyright (c) 2005 Arnaldo Carvalho de Melo * * This program is free software; you can redistribute it and/or modify it diff --git a/net/dccp/ccids/lib/packet_history.c b/net/dccp/ccids/lib/packet_history.c index 6739be1681c9..7b6b03e9271a 100644 --- a/net/dccp/ccids/lib/packet_history.c +++ b/net/dccp/ccids/lib/packet_history.c @@ -1,13 +1,13 @@ /* * net/dccp/packet_history.c * - * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. + * Copyright (c) 2005-6 The University of Waikato, Hamilton, New Zealand. * * An implementation of the DCCP protocol * * This code has been developed by the University of Waikato WAND * research group. For further information please see http://www.wand.net.nz/ - * or e-mail Ian McDonald - iam4@cs.waikato.ac.nz + * or e-mail Ian McDonald - ian.mcdonald@jandi.co.nz * * This code also uses code from Lulea University, rereleased as GPL by its * authors: @@ -391,7 +391,7 @@ void dccp_tx_hist_purge(struct dccp_tx_hist *hist, struct list_head *list) EXPORT_SYMBOL_GPL(dccp_tx_hist_purge); -MODULE_AUTHOR("Ian McDonald , " +MODULE_AUTHOR("Ian McDonald , " "Arnaldo Carvalho de Melo "); MODULE_DESCRIPTION("DCCP TFRC library"); MODULE_LICENSE("GPL"); diff --git a/net/dccp/ccids/lib/packet_history.h b/net/dccp/ccids/lib/packet_history.h index 673c209e4e85..27c43092636c 100644 --- a/net/dccp/ccids/lib/packet_history.h +++ b/net/dccp/ccids/lib/packet_history.h @@ -1,13 +1,13 @@ /* * net/dccp/packet_history.h * - * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. + * Copyright (c) 2005-6 The University of Waikato, Hamilton, New Zealand. * * An implementation of the DCCP protocol * * This code has been developed by the University of Waikato WAND * research group. For further information please see http://www.wand.net.nz/ - * or e-mail Ian McDonald - iam4@cs.waikato.ac.nz + * or e-mail Ian McDonald - ian.mcdonald@jandi.co.nz * * This code also uses code from Lulea University, rereleased as GPL by its * authors: diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h index 130c4c40cfe3..45f30f59ea2a 100644 --- a/net/dccp/ccids/lib/tfrc.h +++ b/net/dccp/ccids/lib/tfrc.h @@ -4,7 +4,7 @@ * net/dccp/ccids/lib/tfrc.h * * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. - * Copyright (c) 2005 Ian McDonald + * Copyright (c) 2005 Ian McDonald * Copyright (c) 2005 Arnaldo Carvalho de Melo * Copyright (c) 2003 Nils-Erik Mattsson, Joacim Haggmark, Magnus Erixzon * diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c index 4fd2ebebf5a0..44076e0c6591 100644 --- a/net/dccp/ccids/lib/tfrc_equation.c +++ b/net/dccp/ccids/lib/tfrc_equation.c @@ -2,7 +2,7 @@ * net/dccp/ccids/lib/tfrc_equation.c * * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand. - * Copyright (c) 2005 Ian McDonald + * Copyright (c) 2005 Ian McDonald * Copyright (c) 2005 Arnaldo Carvalho de Melo * Copyright (c) 2003 Nils-Erik Mattsson, Joacim Haggmark, Magnus Erixzon * diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index d00a2f4ee5dd..b8931d33bec3 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -5,7 +5,7 @@ * * An implementation of the DCCP protocol * Copyright (c) 2005 Arnaldo Carvalho de Melo - * Copyright (c) 2005 Ian McDonald + * Copyright (c) 2005-6 Ian McDonald * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as diff --git a/net/dccp/options.c b/net/dccp/options.c index daf72bb671f0..07a34696ac97 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -4,7 +4,7 @@ * An implementation of the DCCP protocol * Copyright (c) 2005 Aristeu Sergio Rozanski Filho * Copyright (c) 2005 Arnaldo Carvalho de Melo - * Copyright (c) 2005 Ian McDonald + * Copyright (c) 2005 Ian McDonald * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License -- cgit v1.2.2 From 837d107cd101fbf734e9ea2bbb5c7336a329e432 Mon Sep 17 00:00:00 2001 From: Ian McDonald Date: Sat, 26 Aug 2006 19:06:42 -0700 Subject: [DCCP]: Introduces follows48 function This adds a new function to see if two sequence numbers follow each other. Signed off by: Ian McDonald Signed-off-by: David S. Miller --- net/dccp/dccp.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index b8931d33bec3..a5c5475724c0 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -81,6 +81,14 @@ static inline u64 max48(const u64 seq1, const u64 seq2) return after48(seq1, seq2) ? seq1 : seq2; } +/* is seq1 next seqno after seq2 */ +static inline int follows48(const u64 seq1, const u64 seq2) +{ + int diff = (seq1 & 0xFFFF) - (seq2 & 0xFFFF); + + return diff==1; +} + enum { DCCP_MIB_NUM = 0, DCCP_MIB_ACTIVEOPENS, /* ActiveOpens */ -- cgit v1.2.2 From 80193aee18bc862e284ba18504f3a3e14706a997 Mon Sep 17 00:00:00 2001 From: Ian McDonald Date: Sat, 26 Aug 2006 19:07:36 -0700 Subject: [DCCP]: Introduce dccp_rx_hist_find_entry This adds a new function dccp_rx_hist_find_entry. Signed off by: Ian McDonald Signed-off-by: David S. Miller --- net/dccp/ccids/lib/packet_history.c | 19 +++++++++++++++++++ net/dccp/ccids/lib/packet_history.h | 2 ++ 2 files changed, 21 insertions(+) diff --git a/net/dccp/ccids/lib/packet_history.c b/net/dccp/ccids/lib/packet_history.c index 7b6b03e9271a..420c60f8604d 100644 --- a/net/dccp/ccids/lib/packet_history.c +++ b/net/dccp/ccids/lib/packet_history.c @@ -365,6 +365,25 @@ struct dccp_tx_hist_entry * EXPORT_SYMBOL_GPL(dccp_tx_hist_find_entry); +int dccp_rx_hist_find_entry(const struct list_head *list, const u64 seq, + u8 *ccval) +{ + struct dccp_rx_hist_entry *packet = NULL, *entry; + + list_for_each_entry(entry, list, dccphrx_node) + if (entry->dccphrx_seqno == seq) { + packet = entry; + break; + } + + if (packet) + *ccval = packet->dccphrx_ccval; + + return packet != NULL; +} + +EXPORT_SYMBOL_GPL(dccp_rx_hist_find_entry); + void dccp_tx_hist_purge_older(struct dccp_tx_hist *hist, struct list_head *list, struct dccp_tx_hist_entry *packet) diff --git a/net/dccp/ccids/lib/packet_history.h b/net/dccp/ccids/lib/packet_history.h index 27c43092636c..aea9c5d70910 100644 --- a/net/dccp/ccids/lib/packet_history.h +++ b/net/dccp/ccids/lib/packet_history.h @@ -106,6 +106,8 @@ static inline void dccp_tx_hist_entry_delete(struct dccp_tx_hist *hist, extern struct dccp_tx_hist_entry * dccp_tx_hist_find_entry(const struct list_head *list, const u64 seq); +extern int dccp_rx_hist_find_entry(const struct list_head *list, const u64 seq, + u8 *ccval); static inline void dccp_tx_hist_add_entry(struct list_head *list, struct dccp_tx_hist_entry *entry) -- cgit v1.2.2 From 3a13813e6effcfad5910d47b15b724621b50b878 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sat, 26 Aug 2006 20:28:30 -0700 Subject: [BRIDGE] netfilter: memory corruption fix The bridge-netfilter code will overwrite memory if there is not headroom in the skb to save the header. This first showed up when using Xen with sky2 driver that doesn't allocate the extra space. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/netfilter_bridge.h | 14 ++++++++++++-- net/bridge/br_forward.c | 10 +++++++--- 2 files changed, 19 insertions(+), 5 deletions(-) diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 10c13dc4665b..427c67ff89e9 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -48,15 +48,25 @@ enum nf_br_hook_priorities { /* Only used in br_forward.c */ static inline -void nf_bridge_maybe_copy_header(struct sk_buff *skb) +int nf_bridge_maybe_copy_header(struct sk_buff *skb) { + int err; + if (skb->nf_bridge) { if (skb->protocol == __constant_htons(ETH_P_8021Q)) { + err = skb_cow(skb, 18); + if (err) + return err; memcpy(skb->data - 18, skb->nf_bridge->data, 18); skb_push(skb, 4); - } else + } else { + err = skb_cow(skb, 16); + if (err) + return err; memcpy(skb->data - 16, skb->nf_bridge->data, 16); + } } + return 0; } /* This is called by the IP fragmenting code and it ensures there is diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 6ccd32b30809..864fbbc7b24d 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -40,11 +40,15 @@ int br_dev_queue_push_xmit(struct sk_buff *skb) else { #ifdef CONFIG_BRIDGE_NETFILTER /* ip_refrag calls ip_fragment, doesn't copy the MAC header. */ - nf_bridge_maybe_copy_header(skb); + if (nf_bridge_maybe_copy_header(skb)) + kfree_skb(skb); + else #endif - skb_push(skb, ETH_HLEN); + { + skb_push(skb, ETH_HLEN); - dev_queue_xmit(skb); + dev_queue_xmit(skb); + } } return 0; -- cgit v1.2.2 From 66a377c5041e1e399633153c8b500d457281e7c1 Mon Sep 17 00:00:00 2001 From: Ian McDonald Date: Sat, 26 Aug 2006 23:40:50 -0700 Subject: [DCCP]: Fix CCID3 This fixes CCID3 to give much closer performance to RFC4342. CCID3 is meant to alter sending rate based on RTT and loss. The performance was verified against: http://wand.net.nz/~perry/max_download.php For example I tested with netem and had the following parameters: Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%. This gives a theoretical speed of 71.9 Kbits/s. I measured across three runs with this patch set and got 70.1 Kbits/s. Without this patchset the average was 232 Kbits/s which means Linux can't be used for CCID3 research properly. I also tested with netem turned off so box just acting as router with 1.2 msec RTT. The performance with this is the same with or without the patch at around 30 Mbit/s. Signed off by: Ian McDonald Signed-off-by: David S. Miller --- net/dccp/ccids/ccid3.c | 149 ++++++++++++++++++++++++++++-------- net/dccp/ccids/ccid3.h | 5 +- net/dccp/ccids/lib/loss_interval.c | 34 ++++---- net/dccp/ccids/lib/loss_interval.h | 7 +- net/dccp/ccids/lib/packet_history.c | 141 +++------------------------------- net/dccp/ccids/lib/packet_history.h | 11 +-- 6 files changed, 154 insertions(+), 193 deletions(-) diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index 0f85970ee6d1..090bc39e8199 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -342,6 +342,8 @@ static int ccid3_hc_tx_send_packet(struct sock *sk, new_packet->dccphtx_ccval = DCCP_SKB_CB(skb)->dccpd_ccval = hctx->ccid3hctx_last_win_count; + timeval_add_usecs(&hctx->ccid3hctx_t_nom, + hctx->ccid3hctx_t_ipi); } out: return rc; @@ -413,7 +415,8 @@ static void ccid3_hc_tx_packet_sent(struct sock *sk, int more, int len) case TFRC_SSTATE_NO_FBACK: case TFRC_SSTATE_FBACK: if (len > 0) { - hctx->ccid3hctx_t_nom = now; + timeval_sub_usecs(&hctx->ccid3hctx_t_nom, + hctx->ccid3hctx_t_ipi); ccid3_calc_new_t_ipi(hctx); ccid3_calc_new_delta(hctx); timeval_add_usecs(&hctx->ccid3hctx_t_nom, @@ -757,8 +760,7 @@ static void ccid3_hc_rx_send_feedback(struct sock *sk) } hcrx->ccid3hcrx_tstamp_last_feedback = now; - hcrx->ccid3hcrx_last_counter = packet->dccphrx_ccval; - hcrx->ccid3hcrx_seqno_last_counter = packet->dccphrx_seqno; + hcrx->ccid3hcrx_ccval_last_counter = packet->dccphrx_ccval; hcrx->ccid3hcrx_bytes_recv = 0; /* Convert to multiples of 10us */ @@ -782,7 +784,7 @@ static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb) if (!(sk->sk_state == DCCP_OPEN || sk->sk_state == DCCP_PARTOPEN)) return 0; - DCCP_SKB_CB(skb)->dccpd_ccval = hcrx->ccid3hcrx_last_counter; + DCCP_SKB_CB(skb)->dccpd_ccval = hcrx->ccid3hcrx_ccval_last_counter; if (dccp_packet_without_ack(skb)) return 0; @@ -854,6 +856,11 @@ static u32 ccid3_hc_rx_calc_first_li(struct sock *sk) interval = 1; } found: + if (!tail) { + LIMIT_NETDEBUG(KERN_WARNING "%s: tail is null\n", + __FUNCTION__); + return ~0; + } rtt = timeval_delta(&tstamp, &tail->dccphrx_tstamp) * 4 / interval; ccid3_pr_debug("%s, sk=%p, approximated RTT to %uus\n", dccp_role(sk), sk, rtt); @@ -864,9 +871,20 @@ found: delta = timeval_delta(&tstamp, &hcrx->ccid3hcrx_tstamp_last_feedback); x_recv = usecs_div(hcrx->ccid3hcrx_bytes_recv, delta); + if (x_recv == 0) + x_recv = hcrx->ccid3hcrx_x_recv; + tmp1 = (u64)x_recv * (u64)rtt; do_div(tmp1,10000000); tmp2 = (u32)tmp1; + + if (!tmp2) { + LIMIT_NETDEBUG(KERN_WARNING "tmp2 = 0 " + "%s: x_recv = %u, rtt =%u\n", + __FUNCTION__, x_recv, rtt); + return ~0; + } + fval = (hcrx->ccid3hcrx_s * 100000) / tmp2; /* do not alter order above or you will get overflow on 32 bit */ p = tfrc_calc_x_reverse_lookup(fval); @@ -882,31 +900,101 @@ found: static void ccid3_hc_rx_update_li(struct sock *sk, u64 seq_loss, u8 win_loss) { struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); + struct dccp_li_hist_entry *next, *head; + u64 seq_temp; - if (seq_loss != DCCP_MAX_SEQNO + 1 && - list_empty(&hcrx->ccid3hcrx_li_hist)) { - struct dccp_li_hist_entry *li_tail; + if (list_empty(&hcrx->ccid3hcrx_li_hist)) { + if (!dccp_li_hist_interval_new(ccid3_li_hist, + &hcrx->ccid3hcrx_li_hist, seq_loss, win_loss)) + return; - li_tail = dccp_li_hist_interval_new(ccid3_li_hist, - &hcrx->ccid3hcrx_li_hist, - seq_loss, win_loss); - if (li_tail == NULL) + next = (struct dccp_li_hist_entry *) + hcrx->ccid3hcrx_li_hist.next; + next->dccplih_interval = ccid3_hc_rx_calc_first_li(sk); + } else { + struct dccp_li_hist_entry *entry; + struct list_head *tail; + + head = (struct dccp_li_hist_entry *) + hcrx->ccid3hcrx_li_hist.next; + /* FIXME win count check removed as was wrong */ + /* should make this check with receive history */ + /* and compare there as per section 10.2 of RFC4342 */ + + /* new loss event detected */ + /* calculate last interval length */ + seq_temp = dccp_delta_seqno(head->dccplih_seqno, seq_loss); + entry = dccp_li_hist_entry_new(ccid3_li_hist, SLAB_ATOMIC); + + if (entry == NULL) { + printk(KERN_CRIT "%s: out of memory\n",__FUNCTION__); + dump_stack(); return; - li_tail->dccplih_interval = ccid3_hc_rx_calc_first_li(sk); - } else - LIMIT_NETDEBUG(KERN_WARNING "%s: FIXME: find end of " - "interval\n", __FUNCTION__); + } + + list_add(&entry->dccplih_node, &hcrx->ccid3hcrx_li_hist); + + tail = hcrx->ccid3hcrx_li_hist.prev; + list_del(tail); + kmem_cache_free(ccid3_li_hist->dccplih_slab, tail); + + /* Create the newest interval */ + entry->dccplih_seqno = seq_loss; + entry->dccplih_interval = seq_temp; + entry->dccplih_win_count = win_loss; + } } -static void ccid3_hc_rx_detect_loss(struct sock *sk) +static int ccid3_hc_rx_detect_loss(struct sock *sk, + struct dccp_rx_hist_entry *packet) { struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); - u8 win_loss; - const u64 seq_loss = dccp_rx_hist_detect_loss(&hcrx->ccid3hcrx_hist, - &hcrx->ccid3hcrx_li_hist, - &win_loss); + struct dccp_rx_hist_entry *rx_hist = dccp_rx_hist_head(&hcrx->ccid3hcrx_hist); + u64 seqno = packet->dccphrx_seqno; + u64 tmp_seqno; + int loss = 0; + u8 ccval; + + + tmp_seqno = hcrx->ccid3hcrx_seqno_nonloss; + + if (!rx_hist || + follows48(packet->dccphrx_seqno, hcrx->ccid3hcrx_seqno_nonloss)) { + hcrx->ccid3hcrx_seqno_nonloss = seqno; + hcrx->ccid3hcrx_ccval_nonloss = packet->dccphrx_ccval; + goto detect_out; + } + - ccid3_hc_rx_update_li(sk, seq_loss, win_loss); + while (dccp_delta_seqno(hcrx->ccid3hcrx_seqno_nonloss, seqno) + > TFRC_RECV_NUM_LATE_LOSS) { + loss = 1; + ccid3_hc_rx_update_li(sk, hcrx->ccid3hcrx_seqno_nonloss, + hcrx->ccid3hcrx_ccval_nonloss); + tmp_seqno = hcrx->ccid3hcrx_seqno_nonloss; + dccp_inc_seqno(&tmp_seqno); + hcrx->ccid3hcrx_seqno_nonloss = tmp_seqno; + dccp_inc_seqno(&tmp_seqno); + while (dccp_rx_hist_find_entry(&hcrx->ccid3hcrx_hist, + tmp_seqno, &ccval)) { + hcrx->ccid3hcrx_seqno_nonloss = tmp_seqno; + hcrx->ccid3hcrx_ccval_nonloss = ccval; + dccp_inc_seqno(&tmp_seqno); + } + } + + /* FIXME - this code could be simplified with above while */ + /* but works at moment */ + if (follows48(packet->dccphrx_seqno, hcrx->ccid3hcrx_seqno_nonloss)) { + hcrx->ccid3hcrx_seqno_nonloss = seqno; + hcrx->ccid3hcrx_ccval_nonloss = packet->dccphrx_ccval; + } + +detect_out: + dccp_rx_hist_add_packet(ccid3_rx_hist, &hcrx->ccid3hcrx_hist, + &hcrx->ccid3hcrx_li_hist, packet, + hcrx->ccid3hcrx_seqno_nonloss); + return loss; } static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) @@ -916,8 +1004,8 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) struct dccp_rx_hist_entry *packet; struct timeval now; u8 win_count; - u32 p_prev, r_sample, t_elapsed; - int ins; + u32 p_prev, rtt_prev, r_sample, t_elapsed; + int loss; BUG_ON(hcrx == NULL || !(hcrx->ccid3hcrx_state == TFRC_RSTATE_NO_DATA || @@ -932,7 +1020,7 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) case DCCP_PKT_DATAACK: if (opt_recv->dccpor_timestamp_echo == 0) break; - p_prev = hcrx->ccid3hcrx_rtt; + rtt_prev = hcrx->ccid3hcrx_rtt; dccp_timestamp(sk, &now); timeval_sub_usecs(&now, opt_recv->dccpor_timestamp_echo * 10); r_sample = timeval_usecs(&now); @@ -951,8 +1039,8 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) hcrx->ccid3hcrx_rtt = (hcrx->ccid3hcrx_rtt * 9) / 10 + r_sample / 10; - if (p_prev != hcrx->ccid3hcrx_rtt) - ccid3_pr_debug("%s, New RTT=%luus, elapsed time=%u\n", + if (rtt_prev != hcrx->ccid3hcrx_rtt) + ccid3_pr_debug("%s, New RTT=%uus, elapsed time=%u\n", dccp_role(sk), hcrx->ccid3hcrx_rtt, opt_recv->dccpor_elapsed_time); break; @@ -973,8 +1061,7 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) win_count = packet->dccphrx_ccval; - ins = dccp_rx_hist_add_packet(ccid3_rx_hist, &hcrx->ccid3hcrx_hist, - &hcrx->ccid3hcrx_li_hist, packet); + loss = ccid3_hc_rx_detect_loss(sk, packet); if (DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_ACK) return; @@ -991,7 +1078,7 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) case TFRC_RSTATE_DATA: hcrx->ccid3hcrx_bytes_recv += skb->len - dccp_hdr(skb)->dccph_doff * 4; - if (ins != 0) + if (loss) break; dccp_timestamp(sk, &now); @@ -1012,7 +1099,6 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) ccid3_pr_debug("%s, sk=%p(%s), data loss! Reacting...\n", dccp_role(sk), sk, dccp_state_name(sk->sk_state)); - ccid3_hc_rx_detect_loss(sk); p_prev = hcrx->ccid3hcrx_p; /* Calculate loss event rate */ @@ -1022,6 +1108,9 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) /* Scaling up by 1000000 as fixed decimal */ if (i_mean != 0) hcrx->ccid3hcrx_p = 1000000 / i_mean; + } else { + printk(KERN_CRIT "%s: empty loss hist\n",__FUNCTION__); + dump_stack(); } if (hcrx->ccid3hcrx_p > p_prev) { diff --git a/net/dccp/ccids/ccid3.h b/net/dccp/ccids/ccid3.h index 22cb9f80a09d..0a2cb7536d26 100644 --- a/net/dccp/ccids/ccid3.h +++ b/net/dccp/ccids/ccid3.h @@ -120,9 +120,10 @@ struct ccid3_hc_rx_sock { #define ccid3hcrx_x_recv ccid3hcrx_tfrc.tfrcrx_x_recv #define ccid3hcrx_rtt ccid3hcrx_tfrc.tfrcrx_rtt #define ccid3hcrx_p ccid3hcrx_tfrc.tfrcrx_p - u64 ccid3hcrx_seqno_last_counter:48, + u64 ccid3hcrx_seqno_nonloss:48, + ccid3hcrx_ccval_nonloss:4, ccid3hcrx_state:8, - ccid3hcrx_last_counter:4; + ccid3hcrx_ccval_last_counter:4; u32 ccid3hcrx_bytes_recv; struct timeval ccid3hcrx_tstamp_last_feedback; struct timeval ccid3hcrx_tstamp_last_ack; diff --git a/net/dccp/ccids/lib/loss_interval.c b/net/dccp/ccids/lib/loss_interval.c index b93d9fc98cb8..906c81ab9d4f 100644 --- a/net/dccp/ccids/lib/loss_interval.c +++ b/net/dccp/ccids/lib/loss_interval.c @@ -12,6 +12,7 @@ */ #include +#include #include "loss_interval.h" @@ -90,13 +91,13 @@ u32 dccp_li_hist_calc_i_mean(struct list_head *list) u32 w_tot = 0; list_for_each_entry_safe(li_entry, li_next, list, dccplih_node) { - if (i < DCCP_LI_HIST_IVAL_F_LENGTH) { + if (li_entry->dccplih_interval != ~0) { i_tot0 += li_entry->dccplih_interval * dccp_li_hist_w[i]; w_tot += dccp_li_hist_w[i]; + if (i != 0) + i_tot1 += li_entry->dccplih_interval * dccp_li_hist_w[i - 1]; } - if (i != 0) - i_tot1 += li_entry->dccplih_interval * dccp_li_hist_w[i - 1]; if (++i > DCCP_LI_HIST_IVAL_F_LENGTH) break; @@ -107,37 +108,36 @@ u32 dccp_li_hist_calc_i_mean(struct list_head *list) i_tot = max(i_tot0, i_tot1); - /* FIXME: Why do we do this? -Ian McDonald */ - if (i_tot * 4 < w_tot) - i_tot = w_tot * 4; + if (!w_tot) { + LIMIT_NETDEBUG(KERN_WARNING "%s: w_tot = 0\n", __FUNCTION__); + return 1; + } - return i_tot * 4 / w_tot; + return i_tot / w_tot; } EXPORT_SYMBOL_GPL(dccp_li_hist_calc_i_mean); -struct dccp_li_hist_entry *dccp_li_hist_interval_new(struct dccp_li_hist *hist, - struct list_head *list, - const u64 seq_loss, - const u8 win_loss) +int dccp_li_hist_interval_new(struct dccp_li_hist *hist, + struct list_head *list, const u64 seq_loss, const u8 win_loss) { - struct dccp_li_hist_entry *tail = NULL, *entry; + struct dccp_li_hist_entry *entry; int i; - for (i = 0; i <= DCCP_LI_HIST_IVAL_F_LENGTH; ++i) { + for (i = 0; i < DCCP_LI_HIST_IVAL_F_LENGTH; i++) { entry = dccp_li_hist_entry_new(hist, SLAB_ATOMIC); if (entry == NULL) { dccp_li_hist_purge(hist, list); - return NULL; + dump_stack(); + return 0; } - if (tail == NULL) - tail = entry; + entry->dccplih_interval = ~0; list_add(&entry->dccplih_node, list); } entry->dccplih_seqno = seq_loss; entry->dccplih_win_count = win_loss; - return tail; + return 1; } EXPORT_SYMBOL_GPL(dccp_li_hist_interval_new); diff --git a/net/dccp/ccids/lib/loss_interval.h b/net/dccp/ccids/lib/loss_interval.h index dcb370a53f57..0ae85f0340b2 100644 --- a/net/dccp/ccids/lib/loss_interval.h +++ b/net/dccp/ccids/lib/loss_interval.h @@ -52,9 +52,6 @@ extern void dccp_li_hist_purge(struct dccp_li_hist *hist, extern u32 dccp_li_hist_calc_i_mean(struct list_head *list); -extern struct dccp_li_hist_entry * - dccp_li_hist_interval_new(struct dccp_li_hist *hist, - struct list_head *list, - const u64 seq_loss, - const u8 win_loss); +extern int dccp_li_hist_interval_new(struct dccp_li_hist *hist, + struct list_head *list, const u64 seq_loss, const u8 win_loss); #endif /* _DCCP_LI_HIST_ */ diff --git a/net/dccp/ccids/lib/packet_history.c b/net/dccp/ccids/lib/packet_history.c index 420c60f8604d..b876c9c81c65 100644 --- a/net/dccp/ccids/lib/packet_history.c +++ b/net/dccp/ccids/lib/packet_history.c @@ -112,64 +112,27 @@ struct dccp_rx_hist_entry * EXPORT_SYMBOL_GPL(dccp_rx_hist_find_data_packet); -int dccp_rx_hist_add_packet(struct dccp_rx_hist *hist, +void dccp_rx_hist_add_packet(struct dccp_rx_hist *hist, struct list_head *rx_list, struct list_head *li_list, - struct dccp_rx_hist_entry *packet) + struct dccp_rx_hist_entry *packet, + u64 nonloss_seqno) { - struct dccp_rx_hist_entry *entry, *next, *iter; + struct dccp_rx_hist_entry *entry, *next; u8 num_later = 0; - iter = dccp_rx_hist_head(rx_list); - if (iter == NULL) - dccp_rx_hist_add_entry(rx_list, packet); - else { - const u64 seqno = packet->dccphrx_seqno; - - if (after48(seqno, iter->dccphrx_seqno)) - dccp_rx_hist_add_entry(rx_list, packet); - else { - if (dccp_rx_hist_entry_data_packet(iter)) - num_later = 1; - - list_for_each_entry_continue(iter, rx_list, - dccphrx_node) { - if (after48(seqno, iter->dccphrx_seqno)) { - dccp_rx_hist_add_entry(&iter->dccphrx_node, - packet); - goto trim_history; - } - - if (dccp_rx_hist_entry_data_packet(iter)) - num_later++; - - if (num_later == TFRC_RECV_NUM_LATE_LOSS) { - dccp_rx_hist_entry_delete(hist, packet); - return 1; - } - } - - if (num_later < TFRC_RECV_NUM_LATE_LOSS) - dccp_rx_hist_add_entry(rx_list, packet); - /* - * FIXME: else what? should we destroy the packet - * like above? - */ - } - } + list_add(&packet->dccphrx_node, rx_list); -trim_history: - /* - * Trim history (remove all packets after the NUM_LATE_LOSS + 1 - * data packets) - */ num_later = TFRC_RECV_NUM_LATE_LOSS + 1; if (!list_empty(li_list)) { list_for_each_entry_safe(entry, next, rx_list, dccphrx_node) { if (num_later == 0) { - list_del_init(&entry->dccphrx_node); - dccp_rx_hist_entry_delete(hist, entry); + if (after48(nonloss_seqno, + entry->dccphrx_seqno)) { + list_del_init(&entry->dccphrx_node); + dccp_rx_hist_entry_delete(hist, entry); + } } else if (dccp_rx_hist_entry_data_packet(entry)) --num_later; } @@ -217,94 +180,10 @@ trim_history: --num_later; } } - - return 0; } EXPORT_SYMBOL_GPL(dccp_rx_hist_add_packet); -u64 dccp_rx_hist_detect_loss(struct list_head *rx_list, - struct list_head *li_list, u8 *win_loss) -{ - struct dccp_rx_hist_entry *entry, *next, *packet; - struct dccp_rx_hist_entry *a_loss = NULL; - struct dccp_rx_hist_entry *b_loss = NULL; - u64 seq_loss = DCCP_MAX_SEQNO + 1; - u8 num_later = TFRC_RECV_NUM_LATE_LOSS; - - list_for_each_entry_safe(entry, next, rx_list, dccphrx_node) { - if (num_later == 0) { - b_loss = entry; - break; - } else if (dccp_rx_hist_entry_data_packet(entry)) - --num_later; - } - - if (b_loss == NULL) - goto out; - - num_later = 1; - list_for_each_entry_safe_continue(entry, next, rx_list, dccphrx_node) { - if (num_later == 0) { - a_loss = entry; - break; - } else if (dccp_rx_hist_entry_data_packet(entry)) - --num_later; - } - - if (a_loss == NULL) { - if (list_empty(li_list)) { - /* no loss event have occured yet */ - LIMIT_NETDEBUG("%s: TODO: find a lost data packet by " - "comparing to initial seqno\n", - __FUNCTION__); - goto out; - } else { - LIMIT_NETDEBUG("%s: Less than 4 data pkts in history!", - __FUNCTION__); - goto out; - } - } - - /* Locate a lost data packet */ - entry = packet = b_loss; - list_for_each_entry_safe_continue(entry, next, rx_list, dccphrx_node) { - u64 delta = dccp_delta_seqno(entry->dccphrx_seqno, - packet->dccphrx_seqno); - - if (delta != 0) { - if (dccp_rx_hist_entry_data_packet(packet)) - --delta; - /* - * FIXME: check this, probably this % usage is because - * in earlier drafts the ndp count was just 8 bits - * long, but now it cam be up to 24 bits long. - */ -#if 0 - if (delta % DCCP_NDP_LIMIT != - (packet->dccphrx_ndp - - entry->dccphrx_ndp) % DCCP_NDP_LIMIT) -#endif - if (delta != packet->dccphrx_ndp - entry->dccphrx_ndp) { - seq_loss = entry->dccphrx_seqno; - dccp_inc_seqno(&seq_loss); - } - } - packet = entry; - if (packet == a_loss) - break; - } -out: - if (seq_loss != DCCP_MAX_SEQNO + 1) - *win_loss = a_loss->dccphrx_ccval; - else - *win_loss = 0; /* Paranoia */ - - return seq_loss; -} - -EXPORT_SYMBOL_GPL(dccp_rx_hist_detect_loss); - struct dccp_tx_hist *dccp_tx_hist_new(const char *name) { struct dccp_tx_hist *hist = kmalloc(sizeof(*hist), GFP_ATOMIC); diff --git a/net/dccp/ccids/lib/packet_history.h b/net/dccp/ccids/lib/packet_history.h index aea9c5d70910..067cf1c85a37 100644 --- a/net/dccp/ccids/lib/packet_history.h +++ b/net/dccp/ccids/lib/packet_history.h @@ -166,12 +166,6 @@ static inline void dccp_rx_hist_entry_delete(struct dccp_rx_hist *hist, extern void dccp_rx_hist_purge(struct dccp_rx_hist *hist, struct list_head *list); -static inline void dccp_rx_hist_add_entry(struct list_head *list, - struct dccp_rx_hist_entry *entry) -{ - list_add(&entry->dccphrx_node, list); -} - static inline struct dccp_rx_hist_entry * dccp_rx_hist_head(struct list_head *list) { @@ -190,10 +184,11 @@ static inline int entry->dccphrx_type == DCCP_PKT_DATAACK; } -extern int dccp_rx_hist_add_packet(struct dccp_rx_hist *hist, +extern void dccp_rx_hist_add_packet(struct dccp_rx_hist *hist, struct list_head *rx_list, struct list_head *li_list, - struct dccp_rx_hist_entry *packet); + struct dccp_rx_hist_entry *packet, + u64 nonloss_seqno); extern u64 dccp_rx_hist_detect_loss(struct list_head *rx_list, struct list_head *li_list, u8 *win_loss); -- cgit v1.2.2 From 737c17561fb2c6a72810cca7d7c0b8bdc29bb120 Mon Sep 17 00:00:00 2001 From: Peter Horton Date: Sat, 26 Aug 2006 09:07:36 +0100 Subject: [SERIAL] Support for Intashield 2 port PCI serial card Here is a patch that adds support for the Instashield IS-200 2 port PCI serial card. Signed-off-by: Peter Horton Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 14 ++++++++++++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 17 insertions(+) diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index a1d322f8a16c..cd1979daf2b8 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -936,6 +936,7 @@ enum pci_board_num_t { pbn_b1_8_1382400, pbn_b2_1_115200, + pbn_b2_2_115200, pbn_b2_8_115200, pbn_b2_1_460800, @@ -1243,6 +1244,12 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 115200, .uart_offset = 8, }, + [pbn_b2_2_115200] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, [pbn_b2_8_115200] = { .flags = FL_BASE2, .num_ports = 8, @@ -2339,6 +2346,13 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_1_115200 }, + /* + * IntaShield IS-200 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ + pbn_b2_2_115200 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 4eae06b08cf2..4c2839eab7f4 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1726,6 +1726,9 @@ #define PCI_VENDOR_ID_DOMEX 0x134a #define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001 +#define PCI_VENDOR_ID_INTASHIELD 0x135a +#define PCI_DEVICE_ID_INTASHIELD_IS200 0x0d80 + #define PCI_VENDOR_ID_QUATECH 0x135C #define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 #define PCI_DEVICE_ID_QUATECH_DSC100 0x0020 -- cgit v1.2.2 From 7c6f25141b88b5e926f9d43932ce668602d611ae Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Sun, 27 Aug 2006 12:42:08 +0100 Subject: [ARM] 3748/3: Correct error check in vfp_raise_exceptions Patch from Daniel Jacobowitz The recent fix to hide VFP_NAN_FLAG broke the check in vfp_raise_exceptions; it would attempt to deliver an exception mask of 0xfffffeff instead of reporting a serious error condition using printk. Define a safe constant to use for an invalid exception maskm, and use it at both ends. Signed-off-by: Daniel Jacobowitz Signed-off-by: Russell King --- arch/arm/vfp/vfp.h | 8 ++++++++ arch/arm/vfp/vfpmodule.c | 4 ++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 4b97950984e9..5fbdf81a8aaf 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -353,3 +353,11 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand); * A special flag to tell the normalisation code not to normalise. */ #define VFP_NAN_FLAG 0x100 + +/* + * A bit pattern used to indicate the initial (unset) value of the + * exception mask, in case nothing handles an instruction. This + * doesn't include the NAN flag, which get masked out before + * we check for an error. + */ +#define VFP_EXCEPTION_ERROR ((u32)-1 & ~VFP_NAN_FLAG) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 9d265d5e748c..4178f6cc3d37 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -131,7 +131,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ pr_debug("VFP: raising exceptions %08x\n", exceptions); - if (exceptions == (u32)-1) { + if (exceptions == VFP_EXCEPTION_ERROR) { vfp_panic("unhandled bounce"); vfp_raise_sigfpe(0, regs); return; @@ -170,7 +170,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ */ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs) { - u32 exceptions = (u32)-1; + u32 exceptions = VFP_EXCEPTION_ERROR; pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr); -- cgit v1.2.2 From c29ecac18cb740ae845db14963ac586c53962453 Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Sun, 27 Aug 2006 12:42:10 +0100 Subject: [ARM] 3749/3: Correct VFP single/double conversion emulation Patch from Daniel Jacobowitz The fcvtsd/fcvtds emulation was left behind when the numbering of double precision registers was changed from 0-30 to 0-15. Both conversion instructions were writing their results to the wrong register. Also, the conversion instructions should stop after the first element even if a vector length is specified. Signed-off-by: Daniel Jacobowitz Signed-off-by: Russell King --- arch/arm/vfp/vfpdouble.c | 28 +++++++++++++++++++++------- arch/arm/vfp/vfpsingle.c | 33 ++++++++++++++++++++++----------- 2 files changed, 43 insertions(+), 18 deletions(-) diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index 009038c8113e..021581680e94 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -1127,7 +1127,7 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr) { u32 op = inst & FOP_MASK; u32 exceptions = 0; - unsigned int dd = vfp_get_dd(inst); + unsigned int dest; unsigned int dn = vfp_get_dn(inst); unsigned int dm = vfp_get_dm(inst); unsigned int vecitr, veclen, vecstride; @@ -1136,11 +1136,21 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr) veclen = fpscr & FPSCR_LENGTH_MASK; vecstride = (1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK)) * 2; + /* + * fcvtds takes an sN register number as destination, not dN. + * It also always operates on scalars. + */ + if ((inst & FEXT_MASK) == FEXT_FCVT) { + veclen = 0; + dest = vfp_get_sd(inst); + } else + dest = vfp_get_dd(inst); + /* * If destination bank is zero, vector length is always '1'. * ARM DDI0100F C5.1.3, C5.3.2. */ - if (FREG_BANK(dd) == 0) + if (FREG_BANK(dest) == 0) veclen = 0; pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride, @@ -1153,16 +1163,20 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr) for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) { u32 except; - if (op == FOP_EXT) + if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT) + pr_debug("VFP: itr%d (s%u) = op[%u] (d%u)\n", + vecitr >> FPSCR_LENGTH_BIT, + dest, dn, dm); + else if (op == FOP_EXT) pr_debug("VFP: itr%d (d%u) = op[%u] (d%u)\n", vecitr >> FPSCR_LENGTH_BIT, - dd, dn, dm); + dest, dn, dm); else pr_debug("VFP: itr%d (d%u) = (d%u) op[%u] (d%u)\n", vecitr >> FPSCR_LENGTH_BIT, - dd, dn, FOP_TO_IDX(op), dm); + dest, dn, FOP_TO_IDX(op), dm); - except = fop(dd, dn, dm, fpscr); + except = fop(dest, dn, dm, fpscr); pr_debug("VFP: itr%d: exceptions=%08x\n", vecitr >> FPSCR_LENGTH_BIT, except); @@ -1180,7 +1194,7 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr) * we encounter an exception. We continue. */ - dd = FREG_BANK(dd) + ((FREG_IDX(dd) + vecstride) & 6); + dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 6); dn = FREG_BANK(dn) + ((FREG_IDX(dn) + vecstride) & 6); if (FREG_BANK(dm) != 0) dm = FREG_BANK(dm) + ((FREG_IDX(dm) + vecstride) & 6); diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index dae2c2f46052..5bbd5d1c8a5f 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -514,10 +514,6 @@ static u32 vfp_single_fcvtd(int dd, int unused, s32 m, u32 fpscr) else vdd.exponent = vsm.exponent + (1023 - 127); - /* - * Technically, if bit 0 of dd is set, this is an invalid - * instruction. However, we ignore this for efficiency. - */ return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fcvtd"); pack_nan: @@ -1174,7 +1170,7 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr) { u32 op = inst & FOP_MASK; u32 exceptions = 0; - unsigned int sd = vfp_get_sd(inst); + unsigned int dest; unsigned int sn = vfp_get_sn(inst); unsigned int sm = vfp_get_sm(inst); unsigned int vecitr, veclen, vecstride; @@ -1183,11 +1179,23 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr) veclen = fpscr & FPSCR_LENGTH_MASK; vecstride = 1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK); + /* + * fcvtsd takes a dN register number as destination, not sN. + * Technically, if bit 0 of dd is set, this is an invalid + * instruction. However, we ignore this for efficiency. + * It also only operates on scalars. + */ + if ((inst & FEXT_MASK) == FEXT_FCVT) { + veclen = 0; + dest = vfp_get_dd(inst); + } else + dest = vfp_get_sd(inst); + /* * If destination bank is zero, vector length is always '1'. * ARM DDI0100F C5.1.3, C5.3.2. */ - if (FREG_BANK(sd) == 0) + if (FREG_BANK(dest) == 0) veclen = 0; pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride, @@ -1201,15 +1209,18 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr) s32 m = vfp_get_float(sm); u32 except; - if (op == FOP_EXT) + if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT) + pr_debug("VFP: itr%d (d%u) = op[%u] (s%u=%08x)\n", + vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m); + else if (op == FOP_EXT) pr_debug("VFP: itr%d (s%u) = op[%u] (s%u=%08x)\n", - vecitr >> FPSCR_LENGTH_BIT, sd, sn, sm, m); + vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m); else pr_debug("VFP: itr%d (s%u) = (s%u) op[%u] (s%u=%08x)\n", - vecitr >> FPSCR_LENGTH_BIT, sd, sn, + vecitr >> FPSCR_LENGTH_BIT, dest, sn, FOP_TO_IDX(op), sm, m); - except = fop(sd, sn, m, fpscr); + except = fop(dest, sn, m, fpscr); pr_debug("VFP: itr%d: exceptions=%08x\n", vecitr >> FPSCR_LENGTH_BIT, except); @@ -1227,7 +1238,7 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr) * we encounter an exception. We continue. */ - sd = FREG_BANK(sd) + ((FREG_IDX(sd) + vecstride) & 7); + dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 7); sn = FREG_BANK(sn) + ((FREG_IDX(sn) + vecstride) & 7); if (FREG_BANK(sm) != 0) sm = FREG_BANK(sm) + ((FREG_IDX(sm) + vecstride) & 7); -- cgit v1.2.2 From b53a2b41f156a9c9b62c14502037cbc15bc08b54 Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Sun, 27 Aug 2006 12:42:14 +0100 Subject: [ARM] 3758/1: Preserve signalling NaNs in conversion Patch from Daniel Jacobowitz The fcvtds and fcvtsd instructions were generating a qnan bit pattern for both quiet and signalling NaNs. Signed-off-by: Daniel Jacobowitz Signed-off-by: Russell King --- arch/arm/vfp/vfpdouble.c | 2 +- arch/arm/vfp/vfpsingle.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index 021581680e94..04bd3425b29b 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -465,7 +465,7 @@ static u32 vfp_double_fcvts(int sd, int unused, int dm, u32 fpscr) */ if (tm & (VFP_INFINITY|VFP_NAN)) { vsd.exponent = 255; - if (tm & VFP_NAN) + if (tm == VFP_QNAN) vsd.significand |= VFP_SINGLE_SIGNIFICAND_QNAN; goto pack_nan; } else if (tm & VFP_ZERO) diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 5bbd5d1c8a5f..78d7cac5f36b 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -506,7 +506,7 @@ static u32 vfp_single_fcvtd(int dd, int unused, s32 m, u32 fpscr) */ if (tm & (VFP_INFINITY|VFP_NAN)) { vdd.exponent = 2047; - if (tm & VFP_NAN) + if (tm == VFP_QNAN) vdd.significand |= VFP_DOUBLE_SIGNIFICAND_QNAN; goto pack_nan; } else if (tm & VFP_ZERO) -- cgit v1.2.2 From 8f1bf8743c459399685f5df43021acd156548c22 Mon Sep 17 00:00:00 2001 From: Paul Sokolovsky Date: Sun, 27 Aug 2006 12:54:56 +0100 Subject: [ARM] 3760/1: This patch adds timeouts while working with SSP registers. Such timeouts were en Patch from Paul Sokolovsky This patch adds timeouts while working with SSP registers. Such timeouts were envisioned by docstrings in ssp.c, but were not implemented. There were actual lockups while accessing touchscreen for iPaqs h1910, h4000 due to lack of the timeouts. This is updated version of previously submitted patch: 3738/1. Signed-off-by: Paul Sokolovsky Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi_ssp.c | 20 ++++++++++-------- arch/arm/mach-pxa/ssp.c | 35 +++++++++++++++++++++++++------- arch/arm/mach-sa1100/ssp.c | 46 ++++++++++++++++++++++++++++++++++-------- include/asm-arm/arch-pxa/ssp.h | 4 ++-- include/asm-arm/hardware/ssp.h | 4 ++-- 5 files changed, 82 insertions(+), 27 deletions(-) diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index f9421318cb7a..ff6b4ee037f5 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -47,14 +47,15 @@ static struct corgissp_machinfo *ssp_machinfo; */ unsigned long corgi_ssp_ads7846_putget(ulong data) { - unsigned long ret,flag; + unsigned long flag; + u32 ret = 0; spin_lock_irqsave(&corgi_ssp_lock, flag); if (ssp_machinfo->cs_ads7846 >= 0) GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); ssp_write_word(&corgi_ssp_dev,data); - ret = ssp_read_word(&corgi_ssp_dev); + ssp_read_word(&corgi_ssp_dev, &ret); if (ssp_machinfo->cs_ads7846 >= 0) GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); @@ -88,7 +89,9 @@ void corgi_ssp_ads7846_put(ulong data) unsigned long corgi_ssp_ads7846_get(void) { - return ssp_read_word(&corgi_ssp_dev); + u32 ret = 0; + ssp_read_word(&corgi_ssp_dev, &ret); + return ret; } EXPORT_SYMBOL(corgi_ssp_ads7846_putget); @@ -104,6 +107,7 @@ EXPORT_SYMBOL(corgi_ssp_ads7846_get); unsigned long corgi_ssp_dac_put(ulong data) { unsigned long flag, sscr1 = SSCR1_SPH; + u32 tmp; spin_lock_irqsave(&corgi_ssp_lock, flag); @@ -118,7 +122,7 @@ unsigned long corgi_ssp_dac_put(ulong data) GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); ssp_write_word(&corgi_ssp_dev,data); /* Read null data back from device to prevent SSP overflow */ - ssp_read_word(&corgi_ssp_dev); + ssp_read_word(&corgi_ssp_dev, &tmp); if (ssp_machinfo->cs_lcdcon >= 0) GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); @@ -150,7 +154,7 @@ EXPORT_SYMBOL(corgi_ssp_blduty_set); int corgi_ssp_max1111_get(ulong data) { unsigned long flag; - int voltage,voltage1,voltage2; + long voltage = 0, voltage1 = 0, voltage2 = 0; spin_lock_irqsave(&corgi_ssp_lock, flag); if (ssp_machinfo->cs_max1111 >= 0) @@ -163,15 +167,15 @@ int corgi_ssp_max1111_get(ulong data) /* TB1/RB1 */ ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev); /* null read */ + ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */ /* TB12/RB2 */ ssp_write_word(&corgi_ssp_dev,0); - voltage1=ssp_read_word(&corgi_ssp_dev); + ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* TB13/RB3*/ ssp_write_word(&corgi_ssp_dev,0); - voltage2=ssp_read_word(&corgi_ssp_dev); + ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2); ssp_disable(&corgi_ssp_dev); ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 93096befd017..1fddfeaa630d 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -40,6 +40,8 @@ #define PXA_SSP_PORTS 3 +#define TIMEOUT 100000 + struct ssp_info_ { int irq; u32 clock; @@ -92,13 +94,18 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs) * The caller is expected to perform the necessary locking. * * Returns: - * %-ETIMEDOUT timeout occurred (for future) + * %-ETIMEDOUT timeout occurred * 0 success */ int ssp_write_word(struct ssp_dev *dev, u32 data) { - while (!(SSSR_P(dev->port) & SSSR_TNF)) + int timeout = TIMEOUT; + + while (!(SSSR_P(dev->port) & SSSR_TNF)) { + if (!--timeout) + return -ETIMEDOUT; cpu_relax(); + } SSDR_P(dev->port) = data; @@ -117,15 +124,21 @@ int ssp_write_word(struct ssp_dev *dev, u32 data) * The caller is expected to perform the necessary locking. * * Returns: - * %-ETIMEDOUT timeout occurred (for future) + * %-ETIMEDOUT timeout occurred * 32-bit data success */ -int ssp_read_word(struct ssp_dev *dev) +int ssp_read_word(struct ssp_dev *dev, u32 *data) { - while (!(SSSR_P(dev->port) & SSSR_RNE)) + int timeout = TIMEOUT; + + while (!(SSSR_P(dev->port) & SSSR_RNE)) { + if (!--timeout) + return -ETIMEDOUT; cpu_relax(); + } - return SSDR_P(dev->port); + *data = SSDR_P(dev->port); + return 0; } /** @@ -136,13 +149,21 @@ int ssp_read_word(struct ssp_dev *dev) * * The caller is expected to perform the necessary locking. */ -void ssp_flush(struct ssp_dev *dev) +int ssp_flush(struct ssp_dev *dev) { + int timeout = TIMEOUT * 2; + do { while (SSSR_P(dev->port) & SSSR_RNE) { + if (!--timeout) + return -ETIMEDOUT; (void) SSDR_P(dev->port); } + if (!--timeout) + return -ETIMEDOUT; } while (SSSR_P(dev->port) & SSSR_BSY); + + return 0; } /** diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c index 1604dadf27fc..5eba5fbbb561 100644 --- a/arch/arm/mach-sa1100/ssp.c +++ b/arch/arm/mach-sa1100/ssp.c @@ -23,6 +23,8 @@ #include #include +#define TIMEOUT 100000 + static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs) { unsigned int status = Ser4SSSR; @@ -47,18 +49,27 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs) * The caller is expected to perform the necessary locking. * * Returns: - * %-ETIMEDOUT timeout occurred (for future) + * %-ETIMEDOUT timeout occurred * 0 success */ int ssp_write_word(u16 data) { - while (!(Ser4SSSR & SSSR_TNF)) + int timeout = TIMEOUT; + + while (!(Ser4SSSR & SSSR_TNF)) { + if (!--timeout) + return -ETIMEDOUT; cpu_relax(); + } Ser4SSDR = data; - while (!(Ser4SSSR & SSSR_BSY)) + timeout = TIMEOUT; + while (!(Ser4SSSR & SSSR_BSY)) { + if (!--timeout) + return -ETIMEDOUT; cpu_relax(); + } return 0; } @@ -75,15 +86,22 @@ int ssp_write_word(u16 data) * The caller is expected to perform the necessary locking. * * Returns: - * %-ETIMEDOUT timeout occurred (for future) + * %-ETIMEDOUT timeout occurred * 16-bit data success */ -int ssp_read_word(void) +int ssp_read_word(u16 *data) { - while (!(Ser4SSSR & SSSR_RNE)) + int timeout = TIMEOUT; + + while (!(Ser4SSSR & SSSR_RNE)) { + if (!--timeout) + return -ETIMEDOUT; cpu_relax(); + } + + *data = (u16)Ser4SSDR; - return Ser4SSDR; + return 0; } /** @@ -93,14 +111,26 @@ int ssp_read_word(void) * is empty. * * The caller is expected to perform the necessary locking. + * + * Returns: + * %-ETIMEDOUT timeout occurred + * 0 success */ -void ssp_flush(void) +int ssp_flush(void) { + int timeout = TIMEOUT * 2; + do { while (Ser4SSSR & SSSR_RNE) { + if (!--timeout) + return -ETIMEDOUT; (void) Ser4SSDR; } + if (!--timeout) + return -ETIMEDOUT; } while (Ser4SSSR & SSSR_BSY); + + return 0; } /** diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h index 949878c0d908..ea200551a75f 100644 --- a/include/asm-arm/arch-pxa/ssp.h +++ b/include/asm-arm/arch-pxa/ssp.h @@ -40,8 +40,8 @@ struct ssp_dev { }; int ssp_write_word(struct ssp_dev *dev, u32 data); -int ssp_read_word(struct ssp_dev *dev); -void ssp_flush(struct ssp_dev *dev); +int ssp_read_word(struct ssp_dev *dev, u32 *data); +int ssp_flush(struct ssp_dev *dev); void ssp_enable(struct ssp_dev *dev); void ssp_disable(struct ssp_dev *dev); void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp); diff --git a/include/asm-arm/hardware/ssp.h b/include/asm-arm/hardware/ssp.h index 28aa11b769cd..3b42e181997c 100644 --- a/include/asm-arm/hardware/ssp.h +++ b/include/asm-arm/hardware/ssp.h @@ -16,8 +16,8 @@ struct ssp_state { }; int ssp_write_word(u16 data); -int ssp_read_word(void); -void ssp_flush(void); +int ssp_read_word(u16 *data); +int ssp_flush(void); void ssp_enable(void); void ssp_disable(void); void ssp_save_state(struct ssp_state *ssp); -- cgit v1.2.2 From 416112f818afcc08aeaba79ebba899aee5ddf571 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 27 Aug 2006 13:09:14 +0100 Subject: [ARM] 3741/1: remove sa1111.c build warning on non-sa1100 systems Patch from David Brownell Remove buld warning when building sa1111 on non-sa1100 platforms (e.g. PXA). Signed-off-by: David Brownell Signed-off-by: Russell King --- arch/arm/common/sa1111.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index a331c12cead9..29818bd3248f 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -618,7 +618,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) { struct sa1111 *sachip; unsigned long id; - unsigned int has_devs, val; + unsigned int has_devs; int i, ret = -ENODEV; sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL); @@ -669,6 +669,9 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) sa1111_wake(sachip); #ifdef CONFIG_ARCH_SA1100 + { + unsigned int val; + /* * The SDRAM configuration of the SA1110 and the SA1111 must * match. This is very important to ensure that SA1111 accesses @@ -692,6 +695,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) * Enable the SA1110 memory bus request and grant signals. */ sa1110_mb_enable(); + } #endif /* -- cgit v1.2.2 From 9a654518e1b774b8e8f74a819fd12a931e7672c9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 27 Aug 2006 01:23:22 -0700 Subject: [PATCH] drivers/rtc: fix rtc-s3c.c In the cleanups of drivers/rtc/s3c-rtc.c, the base address for the registers got broken. This patch fixes that by ensuring the readb/writeb are all prefixed with the base returned from ioremap()ing the registers. Also fix check for valid year range, which was the wrong way around. Signed-off-by: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-s3c.c | 121 ++++++++++++++++++-------------- include/asm-arm/arch-s3c2410/regs-rtc.h | 2 +- 2 files changed, 68 insertions(+), 55 deletions(-) diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index d6d1bff52b8e..aacbfea98678 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -69,12 +69,12 @@ static void s3c_rtc_setaie(int to) pr_debug("%s: aie=%d\n", __FUNCTION__, to); - tmp = readb(S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN; + tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN; if (to) tmp |= S3C2410_RTCALM_ALMEN; - writeb(tmp, S3C2410_RTCALM); + writeb(tmp, s3c_rtc_base + S3C2410_RTCALM); } static void s3c_rtc_setpie(int to) @@ -84,12 +84,12 @@ static void s3c_rtc_setpie(int to) pr_debug("%s: pie=%d\n", __FUNCTION__, to); spin_lock_irq(&s3c_rtc_pie_lock); - tmp = readb(S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE; + tmp = readb(s3c_rtc_base + S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE; if (to) tmp |= S3C2410_TICNT_ENABLE; - writeb(tmp, S3C2410_TICNT); + writeb(tmp, s3c_rtc_base + S3C2410_TICNT); spin_unlock_irq(&s3c_rtc_pie_lock); } @@ -98,13 +98,13 @@ static void s3c_rtc_setfreq(int freq) unsigned int tmp; spin_lock_irq(&s3c_rtc_pie_lock); - tmp = readb(S3C2410_TICNT) & S3C2410_TICNT_ENABLE; + tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE; s3c_rtc_freq = freq; tmp |= (128 / freq)-1; - writeb(tmp, S3C2410_TICNT); + writeb(tmp, s3c_rtc_base + S3C2410_TICNT); spin_unlock_irq(&s3c_rtc_pie_lock); } @@ -113,14 +113,15 @@ static void s3c_rtc_setfreq(int freq) static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) { unsigned int have_retried = 0; + void __iomem *base = s3c_rtc_base; retry_get_time: - rtc_tm->tm_min = readb(S3C2410_RTCMIN); - rtc_tm->tm_hour = readb(S3C2410_RTCHOUR); - rtc_tm->tm_mday = readb(S3C2410_RTCDATE); - rtc_tm->tm_mon = readb(S3C2410_RTCMON); - rtc_tm->tm_year = readb(S3C2410_RTCYEAR); - rtc_tm->tm_sec = readb(S3C2410_RTCSEC); + rtc_tm->tm_min = readb(base + S3C2410_RTCMIN); + rtc_tm->tm_hour = readb(base + S3C2410_RTCHOUR); + rtc_tm->tm_mday = readb(base + S3C2410_RTCDATE); + rtc_tm->tm_mon = readb(base + S3C2410_RTCMON); + rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR); + rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC); /* the only way to work out wether the system was mid-update * when we read it is to check the second counter, and if it @@ -151,17 +152,25 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) { + void __iomem *base = s3c_rtc_base; + /* the rtc gets round the y2k problem by just not supporting it */ - if (tm->tm_year < 100) + if (tm->tm_year > 100) { + dev_err(dev, "rtc only supports 100 years\n"); return -EINVAL; + } + + pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); - writeb(BIN2BCD(tm->tm_sec), S3C2410_RTCSEC); - writeb(BIN2BCD(tm->tm_min), S3C2410_RTCMIN); - writeb(BIN2BCD(tm->tm_hour), S3C2410_RTCHOUR); - writeb(BIN2BCD(tm->tm_mday), S3C2410_RTCDATE); - writeb(BIN2BCD(tm->tm_mon + 1), S3C2410_RTCMON); - writeb(BIN2BCD(tm->tm_year - 100), S3C2410_RTCYEAR); + writeb(BIN2BCD(tm->tm_sec), base + S3C2410_RTCSEC); + writeb(BIN2BCD(tm->tm_min), base + S3C2410_RTCMIN); + writeb(BIN2BCD(tm->tm_hour), base + S3C2410_RTCHOUR); + writeb(BIN2BCD(tm->tm_mday), base + S3C2410_RTCDATE); + writeb(BIN2BCD(tm->tm_mon + 1), base + S3C2410_RTCMON); + writeb(BIN2BCD(tm->tm_year - 100), base + S3C2410_RTCYEAR); return 0; } @@ -169,16 +178,17 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct rtc_time *alm_tm = &alrm->time; + void __iomem *base = s3c_rtc_base; unsigned int alm_en; - alm_tm->tm_sec = readb(S3C2410_ALMSEC); - alm_tm->tm_min = readb(S3C2410_ALMMIN); - alm_tm->tm_hour = readb(S3C2410_ALMHOUR); - alm_tm->tm_mon = readb(S3C2410_ALMMON); - alm_tm->tm_mday = readb(S3C2410_ALMDATE); - alm_tm->tm_year = readb(S3C2410_ALMYEAR); + alm_tm->tm_sec = readb(base + S3C2410_ALMSEC); + alm_tm->tm_min = readb(base + S3C2410_ALMMIN); + alm_tm->tm_hour = readb(base + S3C2410_ALMHOUR); + alm_tm->tm_mon = readb(base + S3C2410_ALMMON); + alm_tm->tm_mday = readb(base + S3C2410_ALMDATE); + alm_tm->tm_year = readb(base + S3C2410_ALMYEAR); - alm_en = readb(S3C2410_RTCALM); + alm_en = readb(base + S3C2410_RTCALM); pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n", alm_en, @@ -226,6 +236,7 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm) static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct rtc_time *tm = &alrm->time; + void __iomem *base = s3c_rtc_base; unsigned int alrm_en; pr_debug("s3c_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n", @@ -234,32 +245,32 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec); - alrm_en = readb(S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN; - writeb(0x00, S3C2410_RTCALM); + alrm_en = readb(base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN; + writeb(0x00, base + S3C2410_RTCALM); if (tm->tm_sec < 60 && tm->tm_sec >= 0) { alrm_en |= S3C2410_RTCALM_SECEN; - writeb(BIN2BCD(tm->tm_sec), S3C2410_ALMSEC); + writeb(BIN2BCD(tm->tm_sec), base + S3C2410_ALMSEC); } if (tm->tm_min < 60 && tm->tm_min >= 0) { alrm_en |= S3C2410_RTCALM_MINEN; - writeb(BIN2BCD(tm->tm_min), S3C2410_ALMMIN); + writeb(BIN2BCD(tm->tm_min), base + S3C2410_ALMMIN); } if (tm->tm_hour < 24 && tm->tm_hour >= 0) { alrm_en |= S3C2410_RTCALM_HOUREN; - writeb(BIN2BCD(tm->tm_hour), S3C2410_ALMHOUR); + writeb(BIN2BCD(tm->tm_hour), base + S3C2410_ALMHOUR); } pr_debug("setting S3C2410_RTCALM to %08x\n", alrm_en); - writeb(alrm_en, S3C2410_RTCALM); + writeb(alrm_en, base + S3C2410_RTCALM); if (0) { - alrm_en = readb(S3C2410_RTCALM); + alrm_en = readb(base + S3C2410_RTCALM); alrm_en &= ~S3C2410_RTCALM_ALMEN; - writeb(alrm_en, S3C2410_RTCALM); + writeb(alrm_en, base + S3C2410_RTCALM); disable_irq_wake(s3c_rtc_alarmno); } @@ -319,8 +330,8 @@ static int s3c_rtc_ioctl(struct device *dev, static int s3c_rtc_proc(struct device *dev, struct seq_file *seq) { - unsigned int rtcalm = readb(S3C2410_RTCALM); - unsigned int ticnt = readb (S3C2410_TICNT); + unsigned int rtcalm = readb(s3c_rtc_base + S3C2410_RTCALM); + unsigned int ticnt = readb(s3c_rtc_base + S3C2410_TICNT); seq_printf(seq, "alarm_IRQ\t: %s\n", (rtcalm & S3C2410_RTCALM_ALMEN) ? "yes" : "no" ); @@ -387,39 +398,40 @@ static struct rtc_class_ops s3c_rtcops = { static void s3c_rtc_enable(struct platform_device *pdev, int en) { + void __iomem *base = s3c_rtc_base; unsigned int tmp; if (s3c_rtc_base == NULL) return; if (!en) { - tmp = readb(S3C2410_RTCCON); - writeb(tmp & ~S3C2410_RTCCON_RTCEN, S3C2410_RTCCON); + tmp = readb(base + S3C2410_RTCCON); + writeb(tmp & ~S3C2410_RTCCON_RTCEN, base + S3C2410_RTCCON); - tmp = readb(S3C2410_TICNT); - writeb(tmp & ~S3C2410_TICNT_ENABLE, S3C2410_TICNT); + tmp = readb(base + S3C2410_TICNT); + writeb(tmp & ~S3C2410_TICNT_ENABLE, base + S3C2410_TICNT); } else { /* re-enable the device, and check it is ok */ - if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){ + if ((readb(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){ dev_info(&pdev->dev, "rtc disabled, re-enabling\n"); - tmp = readb(S3C2410_RTCCON); - writeb(tmp | S3C2410_RTCCON_RTCEN , S3C2410_RTCCON); + tmp = readb(base + S3C2410_RTCCON); + writeb(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON); } - if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){ + if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){ dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n"); - tmp = readb(S3C2410_RTCCON); - writeb(tmp& ~S3C2410_RTCCON_CNTSEL , S3C2410_RTCCON); + tmp = readb(base + S3C2410_RTCCON); + writeb(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON); } - if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){ + if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){ dev_info(&pdev->dev, "removing RTCCON_CLKRST\n"); - tmp = readb(S3C2410_RTCCON); - writeb(tmp & ~S3C2410_RTCCON_CLKRST, S3C2410_RTCCON); + tmp = readb(base + S3C2410_RTCCON); + writeb(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON); } } } @@ -475,8 +487,8 @@ static int s3c_rtc_probe(struct platform_device *pdev) } s3c_rtc_mem = request_mem_region(res->start, - res->end-res->start+1, - pdev->name); + res->end-res->start+1, + pdev->name); if (s3c_rtc_mem == NULL) { dev_err(&pdev->dev, "failed to reserve memory region\n"); @@ -495,7 +507,8 @@ static int s3c_rtc_probe(struct platform_device *pdev) s3c_rtc_enable(pdev, 1); - pr_debug("s3c2410_rtc: RTCCON=%02x\n", readb(S3C2410_RTCCON)); + pr_debug("s3c2410_rtc: RTCCON=%02x\n", + readb(s3c_rtc_base + S3C2410_RTCCON)); s3c_rtc_setfreq(s3c_rtc_freq); @@ -543,7 +556,7 @@ static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state) /* save TICNT for anyone using periodic interrupts */ - ticnt_save = readb(S3C2410_TICNT); + ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT); /* calculate time delta for suspend */ @@ -567,7 +580,7 @@ static int s3c_rtc_resume(struct platform_device *pdev) rtc_tm_to_time(&tm, &time.tv_sec); restore_time_delta(&s3c_rtc_delta, &time); - writeb(ticnt_save, S3C2410_TICNT); + writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT); return 0; } #else diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/arch-s3c2410/regs-rtc.h index 228983f89bc8..0fbec07bb6b8 100644 --- a/include/asm-arm/arch-s3c2410/regs-rtc.h +++ b/include/asm-arm/arch-s3c2410/regs-rtc.h @@ -18,7 +18,7 @@ #ifndef __ASM_ARCH_REGS_RTC_H #define __ASM_ARCH_REGS_RTC_H __FILE__ -#define S3C2410_RTCREG(x) ((x) + S3C24XX_VA_RTC) +#define S3C2410_RTCREG(x) (x) #define S3C2410_RTCCON S3C2410_RTCREG(0x40) #define S3C2410_RTCCON_RTCEN (1<<0) -- cgit v1.2.2 From c06aad854fdb9da38fcc22dccfe9d72919453e43 Mon Sep 17 00:00:00 2001 From: Daniel Kobras Date: Sun, 27 Aug 2006 01:23:24 -0700 Subject: [PATCH] dm: Fix deadlock under high i/o load in raid1 setup. On an nForce4-equipped machine with two SATA disk in raid1 setup using dmraid, we experienced frequent deadlock of the system under high i/o load. 'cat /dev/zero > ~/zero' was the most reliable way to reproduce them: Randomly after a few GB, 'cp' would be left in 'D' state along with kjournald and kmirrord. The functions cp and kjournald were blocked in did vary, but kmirrord's wchan always pointed to 'mempool_alloc()'. We've seen this pattern on 2.6.15 and 2.6.17 kernels. http://lkml.org/lkml/2005/4/20/142 indicates that this problem has been around even before. So much for the facts, here's my interpretation: mempool_alloc() first tries to atomically allocate the requested memory, or falls back to hand out preallocated chunks from the mempool. If both fail, it puts the calling process (kmirrord in this case) on a private waitqueue until somebody refills the pool. Where the only 'somebody' is kmirrord itself, so we have a deadlock. I worked around this problem by falling back to a (blocking) kmalloc when before kmirrord would have ended up on the waitqueue. This defeats part of the benefits of using the mempool, but at least keeps the system running. And it could be done with a two-line change. Note that mempool_alloc() clears the GFP_NOIO flag internally, and only uses it to decide whether to wait or return an error if immediate allocation fails, so the attached patch doesn't change behaviour in the non-deadlocking case. Path is against current git (2.6.18-rc4), but should apply to earlier versions as well. I've tested on 2.6.15, where this patch makes the difference between random lockup and a stable system. Signed-off-by: Daniel Kobras Acked-by: Alasdair G Kergon Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/dm-raid1.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index be48cedf986b..c54de989eb00 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -255,7 +255,9 @@ static struct region *__rh_alloc(struct region_hash *rh, region_t region) struct region *reg, *nreg; read_unlock(&rh->hash_lock); - nreg = mempool_alloc(rh->region_pool, GFP_NOIO); + nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC); + if (unlikely(!nreg)) + nreg = kmalloc(sizeof(struct region), GFP_NOIO); nreg->state = rh->log->type->in_sync(rh->log, region, 1) ? RH_CLEAN : RH_NOSYNC; nreg->rh = rh; -- cgit v1.2.2 From b6b5bce3571e496504a89ee575d32101e0a98b93 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 27 Aug 2006 01:23:25 -0700 Subject: [PATCH] swsusp: Fix swap_type_of There is a bug in mm/swapfile.c#swap_type_of() that makes swsusp only be able to use the first active swap partition as the resume device. Fix it. Signed-off-by: Rafael J. Wysocki Cc: Hugh Dickins Acked-by: Pavel Machek Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swapfile.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/swapfile.c b/mm/swapfile.c index e70d6c6d6fee..f1f5ec783781 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -442,11 +442,12 @@ int swap_type_of(dev_t device) if (!(swap_info[i].flags & SWP_WRITEOK)) continue; + if (!device) { spin_unlock(&swap_lock); return i; } - inode = swap_info->swap_file->f_dentry->d_inode; + inode = swap_info[i].swap_file->f_dentry->d_inode; if (S_ISBLK(inode->i_mode) && device == MKDEV(imajor(inode), iminor(inode))) { spin_unlock(&swap_lock); -- cgit v1.2.2 From 641741e010b615bae417c876a21d17dbd616241f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 27 Aug 2006 01:23:27 -0700 Subject: [PATCH] rtc-s3c.c: fix time setting checks Fix the year check on setting the time with the S3C24XX RTC driver. Also move the debug to before the set to see what is going on if it does fail. Signed-off-by: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-s3c.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index aacbfea98678..2c7de79c83b9 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -153,24 +153,25 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) { void __iomem *base = s3c_rtc_base; + int year = tm->tm_year - 100; - /* the rtc gets round the y2k problem by just not supporting it */ + pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + /* we get around y2k by simply not supporting it */ - if (tm->tm_year > 100) { + if (year < 0 || year >= 100) { dev_err(dev, "rtc only supports 100 years\n"); return -EINVAL; } - pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n", - tm->tm_year, tm->tm_mon, tm->tm_mday, - tm->tm_hour, tm->tm_min, tm->tm_sec); - writeb(BIN2BCD(tm->tm_sec), base + S3C2410_RTCSEC); writeb(BIN2BCD(tm->tm_min), base + S3C2410_RTCMIN); writeb(BIN2BCD(tm->tm_hour), base + S3C2410_RTCHOUR); writeb(BIN2BCD(tm->tm_mday), base + S3C2410_RTCDATE); writeb(BIN2BCD(tm->tm_mon + 1), base + S3C2410_RTCMON); - writeb(BIN2BCD(tm->tm_year - 100), base + S3C2410_RTCYEAR); + writeb(BIN2BCD(year), base + S3C2410_RTCYEAR); return 0; } -- cgit v1.2.2 From cc36e7f124da139a819ad316c39d9dbcb5ba1897 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Sun, 27 Aug 2006 01:23:27 -0700 Subject: [PATCH] tty: remove bogus call to cdev_del() When cdev_add() failed there is no reason to call cdev_del(). Signed-off-by: Rolf Eike Beer Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index bfdb90242a90..d6e4eaa48538 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -3094,7 +3094,6 @@ int tty_register_driver(struct tty_driver *driver) driver->cdev.owner = driver->owner; error = cdev_add(&driver->cdev, dev, driver->num); if (error) { - cdev_del(&driver->cdev); unregister_chrdev_region(dev, driver->num); driver->ttys = NULL; driver->termios = driver->termios_locked = NULL; -- cgit v1.2.2 From a2e0b56316fa90e137802fdad6a7c6a9b85c86c3 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 27 Aug 2006 01:23:28 -0700 Subject: [PATCH] Fix docs for fs.suid_dumpable Sergey Vlasov noticed that there is not kernel.suid_dumpable, but fs.suid_dumpable. How KERN_SETUID_DUMPABLE ended up in fs_table[]? Hell knows... Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/fs.txt | 20 ++++++++++++++++++++ Documentation/sysctl/kernel.txt | 20 -------------------- 2 files changed, 20 insertions(+), 20 deletions(-) diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index 0b62c62142cf..5c3a51905969 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -25,6 +25,7 @@ Currently, these files are in /proc/sys/fs: - inode-state - overflowuid - overflowgid +- suid_dumpable - super-max - super-nr @@ -131,6 +132,25 @@ The default is 65534. ============================================================== +suid_dumpable: + +This value can be used to query and set the core dump mode for setuid +or otherwise protected/tainted binaries. The modes are + +0 - (default) - traditional behaviour. Any process which has changed + privilege levels or is execute only will not be dumped +1 - (debug) - all processes dump core when possible. The core dump is + owned by the current user and no security is applied. This is + intended for system debugging situations only. Ptrace is unchecked. +2 - (suidsafe) - any binary which normally would not be dumped is dumped + readable by root only. This allows the end user to remove + such a dump but not access it directly. For security reasons + core dumps in this mode will not overwrite one another or + other files. This mode is appropriate when adminstrators are + attempting to debug problems in a normal environment. + +============================================================== + super-max & super-nr: These numbers control the maximum number of superblocks, and diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 7345c338080a..89bf8c20a586 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -50,7 +50,6 @@ show up in /proc/sys/kernel: - shmmax [ sysv ipc ] - shmmni - stop-a [ SPARC only ] -- suid_dumpable - sysrq ==> Documentation/sysrq.txt - tainted - threads-max @@ -310,25 +309,6 @@ kernel. This value defaults to SHMMAX. ============================================================== -suid_dumpable: - -This value can be used to query and set the core dump mode for setuid -or otherwise protected/tainted binaries. The modes are - -0 - (default) - traditional behaviour. Any process which has changed - privilege levels or is execute only will not be dumped -1 - (debug) - all processes dump core when possible. The core dump is - owned by the current user and no security is applied. This is - intended for system debugging situations only. Ptrace is unchecked. -2 - (suidsafe) - any binary which normally would not be dumped is dumped - readable by root only. This allows the end user to remove - such a dump but not access it directly. For security reasons - core dumps in this mode will not overwrite one another or - other files. This mode is appropriate when adminstrators are - attempting to debug problems in a normal environment. - -============================================================== - tainted: Non-zero if the kernel has been tainted. Numeric values, which -- cgit v1.2.2 From 7334bb4ae931159384acf168eacb0d5d6e0d083c Mon Sep 17 00:00:00 2001 From: Danny Tholen Date: Sun, 27 Aug 2006 01:23:29 -0700 Subject: [PATCH] 1394: fix for recently added firewire patch that breaks things on ppc Recently a patch was added for preliminary suspend/resume handling on !PPC_PMAC. However, this broke both suspend and firewire on powerpc because it saves the pci state after the device has already been disabled. This moves the save state to before the pmac specific code. Signed-off-by: Danny Tholen Cc: Stefan Richter Acked-by: Benjamin Herrenschmidt Cc: Ben Collins Cc: Jody McIntyre Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ieee1394/ohci1394.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index d4bad6704bbe..448df2773377 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -3552,6 +3552,8 @@ static int ohci1394_pci_resume (struct pci_dev *pdev) static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state) { + pci_save_state(pdev); + #ifdef CONFIG_PPC_PMAC if (machine_is(powermac)) { struct device_node *of_node; @@ -3563,8 +3565,6 @@ static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state) } #endif - pci_save_state(pdev); - return 0; } -- cgit v1.2.2 From 6946bd636364effce06ea46fe8f8cd6e2edb004e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 27 Aug 2006 01:23:31 -0700 Subject: [PATCH] lockdep: fix blkdev_open() warning On Wed, 2006-08-09 at 07:57 +0200, Rolf Eike Beer wrote: > ============================================= > [ INFO: possible recursive locking detected ] > --------------------------------------------- > parted/7929 is trying to acquire lock: > (&bdev->bd_mutex){--..}, at: [] __blkdev_put+0x1e/0x13c > > but task is already holding lock: > (&bdev->bd_mutex){--..}, at: [] do_open+0x72/0x3a8 > > other info that might help us debug this: > 1 lock held by parted/7929: > #0: (&bdev->bd_mutex){--..}, at: [] do_open+0x72/0x3a8 > stack backtrace: > [] show_trace_log_lvl+0x58/0x15b > [] show_trace+0xd/0x10 > [] dump_stack+0x17/0x1a > [] __lock_acquire+0x753/0x99c > [] lock_acquire+0x4a/0x6a > [] mutex_lock_nested+0xc8/0x20c > [] __blkdev_put+0x1e/0x13c > [] blkdev_put+0xa/0xc > [] do_open+0x336/0x3a8 > [] blkdev_open+0x1f/0x4c > [] __dentry_open+0xc7/0x1aa > [] nameidata_to_filp+0x1c/0x2e > [] do_filp_open+0x2e/0x35 > [] do_sys_open+0x38/0x68 > [] sys_open+0x16/0x18 > [] sysenter_past_esp+0x56/0x8d OK, I'm having a look here; its all new to me so bear with me. blkdev_open() calls do_open(bdev, ...,BD_MUTEX_NORMAL) and takes mutex_lock_nested(&bdev->bd_mutex, BD_MUTEX_NORMAL) then something fails, and we're thrown to: out_first: where if (bdev != bdev->bd_contains) blkdev_put(bdev->bd_contains) which is __blkdev_put(bdev->bd_contains, BD_MUTEX_NORMAL) which does mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_NORMAL) <--- lockdep trigger When going to out_first, dbev->bd_contains is either bdev or whole, and since we take the branch it must be whole. So it seems to me the following patch would be the right one: [akpm@osdl.org: compile fix] Signed-off-by: Peter Zijlstra Cc: Arjan van de Ven Acked-by: NeilBrown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/block_dev.c | 114 ++++++++++++++++++++++++++++----------------------------- 1 file changed, 56 insertions(+), 58 deletions(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index 37534573960b..045f98854f14 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -884,6 +884,61 @@ void bd_set_size(struct block_device *bdev, loff_t size) } EXPORT_SYMBOL(bd_set_size); +static int __blkdev_put(struct block_device *bdev, unsigned int subclass) +{ + int ret = 0; + struct inode *bd_inode = bdev->bd_inode; + struct gendisk *disk = bdev->bd_disk; + + mutex_lock_nested(&bdev->bd_mutex, subclass); + lock_kernel(); + if (!--bdev->bd_openers) { + sync_blockdev(bdev); + kill_bdev(bdev); + } + if (bdev->bd_contains == bdev) { + if (disk->fops->release) + ret = disk->fops->release(bd_inode, NULL); + } else { + mutex_lock_nested(&bdev->bd_contains->bd_mutex, + subclass + 1); + bdev->bd_contains->bd_part_count--; + mutex_unlock(&bdev->bd_contains->bd_mutex); + } + if (!bdev->bd_openers) { + struct module *owner = disk->fops->owner; + + put_disk(disk); + module_put(owner); + + if (bdev->bd_contains != bdev) { + kobject_put(&bdev->bd_part->kobj); + bdev->bd_part = NULL; + } + bdev->bd_disk = NULL; + bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info; + if (bdev != bdev->bd_contains) + __blkdev_put(bdev->bd_contains, subclass + 1); + bdev->bd_contains = NULL; + } + unlock_kernel(); + mutex_unlock(&bdev->bd_mutex); + bdput(bdev); + return ret; +} + +int blkdev_put(struct block_device *bdev) +{ + return __blkdev_put(bdev, BD_MUTEX_NORMAL); +} +EXPORT_SYMBOL(blkdev_put); + +int blkdev_put_partition(struct block_device *bdev) +{ + return __blkdev_put(bdev, BD_MUTEX_PARTITION); +} +EXPORT_SYMBOL(blkdev_put_partition); + static int blkdev_get_whole(struct block_device *bdev, mode_t mode, unsigned flags); @@ -980,7 +1035,7 @@ out_first: bdev->bd_disk = NULL; bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info; if (bdev != bdev->bd_contains) - blkdev_put(bdev->bd_contains); + __blkdev_put(bdev->bd_contains, BD_MUTEX_WHOLE); bdev->bd_contains = NULL; put_disk(disk); module_put(owner); @@ -1079,63 +1134,6 @@ static int blkdev_open(struct inode * inode, struct file * filp) return res; } -static int __blkdev_put(struct block_device *bdev, unsigned int subclass) -{ - int ret = 0; - struct inode *bd_inode = bdev->bd_inode; - struct gendisk *disk = bdev->bd_disk; - - mutex_lock_nested(&bdev->bd_mutex, subclass); - lock_kernel(); - if (!--bdev->bd_openers) { - sync_blockdev(bdev); - kill_bdev(bdev); - } - if (bdev->bd_contains == bdev) { - if (disk->fops->release) - ret = disk->fops->release(bd_inode, NULL); - } else { - mutex_lock_nested(&bdev->bd_contains->bd_mutex, - subclass + 1); - bdev->bd_contains->bd_part_count--; - mutex_unlock(&bdev->bd_contains->bd_mutex); - } - if (!bdev->bd_openers) { - struct module *owner = disk->fops->owner; - - put_disk(disk); - module_put(owner); - - if (bdev->bd_contains != bdev) { - kobject_put(&bdev->bd_part->kobj); - bdev->bd_part = NULL; - } - bdev->bd_disk = NULL; - bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info; - if (bdev != bdev->bd_contains) - __blkdev_put(bdev->bd_contains, subclass + 1); - bdev->bd_contains = NULL; - } - unlock_kernel(); - mutex_unlock(&bdev->bd_mutex); - bdput(bdev); - return ret; -} - -int blkdev_put(struct block_device *bdev) -{ - return __blkdev_put(bdev, BD_MUTEX_NORMAL); -} - -EXPORT_SYMBOL(blkdev_put); - -int blkdev_put_partition(struct block_device *bdev) -{ - return __blkdev_put(bdev, BD_MUTEX_PARTITION); -} - -EXPORT_SYMBOL(blkdev_put_partition); - static int blkdev_close(struct inode * inode, struct file * filp) { struct block_device *bdev = I_BDEV(filp->f_mapping->host); -- cgit v1.2.2 From 7fd5aecc5d32882f8e29b14370e9ce2520e7e56f Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sun, 27 Aug 2006 01:23:33 -0700 Subject: [PATCH] mtd corruption fix Read the return value before we release the nand device otherwise the value can become corrupted by another user of chip->ops, ultimately resulting in filesystem corruption. Signed-off-by: Richard Purdie Cc: David Woodhouse Acked-by: Josh Boyer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/nand/nand_base.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 62b861304e03..c8cbc00243fe 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1093,9 +1093,10 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, ret = nand_do_read_ops(mtd, from, &chip->ops); + *retlen = chip->ops.retlen; + nand_release_device(mtd); - *retlen = chip->ops.retlen; return ret; } @@ -1691,9 +1692,10 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, ret = nand_do_write_ops(mtd, to, &chip->ops); + *retlen = chip->ops.retlen; + nand_release_device(mtd); - *retlen = chip->ops.retlen; return ret; } -- cgit v1.2.2 From cb3e0fe3a5dabdc5eda50b825acb23bdfa2d1d55 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Sun, 27 Aug 2006 01:23:33 -0700 Subject: [PATCH] x86: Fix dmi detection of MacBookPro and iMac Commit b64ef8afa58f397e1eaba2bd9ecaa6812064d464 ("[PATCH] add imacfb documentation and detection") contained a wrong DMI_MATCH. Signed-off-by: Thomas Meyer Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/imacfb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/imacfb.c b/drivers/video/imacfb.c index b485bece5fc9..18ea4a549105 100644 --- a/drivers/video/imacfb.c +++ b/drivers/video/imacfb.c @@ -71,10 +71,10 @@ static int set_system(struct dmi_system_id *id) static struct dmi_system_id __initdata dmi_system_table[] = { { set_system, "iMac4,1", { DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), - DMI_MATCH(DMI_BIOS_VERSION,"iMac4,1") }, (void*)M_I17}, + DMI_MATCH(DMI_PRODUCT_NAME,"iMac4,1") }, (void*)M_I17}, { set_system, "MacBookPro1,1", { DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), - DMI_MATCH(DMI_BIOS_VERSION,"MacBookPro1,1") }, (void*)M_I17}, + DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro1,1") }, (void*)M_I17}, { set_system, "MacBook1,1", { DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook1,1")}, (void *)M_MACBOOK}, -- cgit v1.2.2 From f8986c241dfd54d51c9eff967129a550ae230144 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 27 Aug 2006 01:23:34 -0700 Subject: [PATCH] revert "Drop tasklist lock in do_sched_setscheduler" sched_setscheduler() looks at ->signal->rlim[]. It is unsafe do dereference ->signal unless tasklist_lock or ->siglock is held (or p == current). We pin the task structure, but this can't prevent from release_task()->__exit_signal() which sets ->signal = NULL. Restore tasklist_lock across the setscheduler call. Signed-off-by: Oleg Nesterov Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sched.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index a2be2d055299..a234fbee1238 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4162,10 +4162,8 @@ do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param) read_unlock_irq(&tasklist_lock); return -ESRCH; } - get_task_struct(p); - read_unlock_irq(&tasklist_lock); retval = sched_setscheduler(p, policy, &lparam); - put_task_struct(p); + read_unlock_irq(&tasklist_lock); return retval; } -- cgit v1.2.2 From a0cc621f52a4dea10c34eeed6eb4e36b26db63dc Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 27 Aug 2006 01:23:35 -0700 Subject: [PATCH] cpufreq: acpi-cpufreq: Ignore failure from acpi_cpufreq_early_init_acpi Ignore the return value of early_init_acpi(), as it can give false error messages. If there is something really wrong, then register_driver will fail cleanly with EINVAL later. [ background: modprobe acpi-cpufreq on systems not capable of speed-scaling started failing with 'invalid argument', where previously it would only ever -ENODEV I'm not 100% happy with the solution. It'd be better to handle failure properly, but this is a low-impact change for 2.6.18 We can always revisit doing this better in .19 --davej.] Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index efb41e81351c..e6ea00edcb54 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -567,16 +567,11 @@ static struct cpufreq_driver acpi_cpufreq_driver = { static int __init acpi_cpufreq_init (void) { - int result = 0; - dprintk("acpi_cpufreq_init\n"); - result = acpi_cpufreq_early_init_acpi(); + acpi_cpufreq_early_init_acpi(); - if (!result) - result = cpufreq_register_driver(&acpi_cpufreq_driver); - - return (result); + return cpufreq_register_driver(&acpi_cpufreq_driver); } -- cgit v1.2.2 From 01cfaf0d12ae5fa092cc916ca4066ee1598e857d Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Sun, 27 Aug 2006 01:23:36 -0700 Subject: [PATCH] char/moxa.c: fix endianess and multiple-card issues While testing Moxa C218T/PCI on PowerPC 405EP I found that loading firmware using the linux kernel driver fails because calculation of the checksum is not endianess independent in the original code. After I fixed this I found that uploading firmware in a system with multiple cards causes a kernel oops. I had a look in the recent moxa sources and found that they do some kind of locking there. Applying this lock fixed the problem. Alan sayeth: Checksum changes are clearly correct. Other changes is an improvement but not I think enough to handle malicious firmware attacks. That said such an attacker has CAP_SYS_RAWIO anyway so that part is irrelevant except for neatness. [akpm@osdl.org: cleanups] Signed-off-by: Dirk Eibach Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/moxa.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 4ea7bd5f4f56..a369dd6877d8 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -142,6 +142,7 @@ typedef struct _moxa_board_conf { static moxa_board_conf moxa_boards[MAX_BOARDS]; static void __iomem *moxaBaseAddr[MAX_BOARDS]; +static int loadstat[MAX_BOARDS]; struct moxa_str { int type; @@ -1688,6 +1689,8 @@ int MoxaDriverPoll(void) if (moxaCard == 0) return (-1); for (card = 0; card < MAX_BOARDS; card++) { + if (loadstat[card] == 0) + continue; if ((ports = moxa_boards[card].numPorts) == 0) continue; if (readb(moxaIntPend[card]) == 0xff) { @@ -2903,6 +2906,7 @@ static int moxaloadcode(int cardno, unsigned char __user *tmp, int len) } break; } + loadstat[cardno] = 1; return (0); } @@ -2920,7 +2924,7 @@ static int moxaloadc218(int cardno, void __iomem *baseAddr, int len) len1 = len >> 1; ptr = (ushort *) moxaBuff; for (i = 0; i < len1; i++) - usum += *(ptr + i); + usum += le16_to_cpu(*(ptr + i)); retry = 0; do { len1 = len >> 1; @@ -2992,7 +2996,7 @@ static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPor wlen = len >> 1; uptr = (ushort *) moxaBuff; for (i = 0; i < wlen; i++) - usum += uptr[i]; + usum += le16_to_cpu(uptr[i]); retry = 0; j = 0; do { -- cgit v1.2.2 From b8cf368944807e29b16b24588a2a35c829bc9d9a Mon Sep 17 00:00:00 2001 From: "Paul A. Clarke" Date: Sun, 27 Aug 2006 01:23:37 -0700 Subject: [PATCH] matroxfb: fix jittery display on non-ppc systems I wish I was happier about this patch. It'll serve as a placeholder for the moment. I'm still trying to get a G550 working in order to even reproduce the problem this patch introduces. I find that the G450 has jitter even without this patch, so it won't show me what the patch changed. At this point, I'll continue trying to get the G550 to work, and in parallel work with the G450 to work out the kinks. The patch is below. Set XDVICLKCTRL only on PPC, as doing this apparently introduces jitter on the G550, at least on x86 architectures. Signed-off-by: Paul A. Clarke Signed-off-by: Petr Vandrovec Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/matrox/g450_pll.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/matrox/g450_pll.c index 440272ad10e7..7c76e079ca7d 100644 --- a/drivers/video/matrox/g450_pll.c +++ b/drivers/video/matrox/g450_pll.c @@ -331,7 +331,15 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll, tmp |= M1064_XPIXCLKCTRL_PLL_UP; } matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp); +#ifdef __powerpc__ + /* This is necessary to avoid jitter on PowerPC + * (OpenFirmware) systems, but apparently + * introduces jitter, at least on a x86-64 + * using DVI. + * A simple workaround is disable for non-PPC. + */ matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0); +#endif /* __powerpc__ */ matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl); matroxfb_DAC_unlock_irqrestore(flags); -- cgit v1.2.2 From 533475d3d48eb839be2b57f6b020150abae91063 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sun, 27 Aug 2006 01:23:39 -0700 Subject: [PATCH] vcsa attribute bits -> ioctl(VT_GETHIFONTMASK) When reading /dev/vcsa while a font with more than 256 characters is loaded, one of the attribute bits records the 9th bit of the character. But depending on the console driver (vgacon or fbcon for instance), that's bit 3 or bit 0. And there is no way for userland to know that, thus no way for userland to safely grab the screen content. So here is a (tested) patch: Add a VT_GETHIFONTMASK ioctl for knowing which bit is the 9th bit for VC text (vc_hi_font_mask field of the vc_data structure). Signed-off-by: Samuel Thibault Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/vt_ioctl.c | 2 ++ include/linux/compat_ioctl.h | 1 + include/linux/vt.h | 1 + 3 files changed, 4 insertions(+) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index eccffaf26faa..a5628a8b6620 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -1011,6 +1011,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, return -EPERM; vt_dont_switch = 0; return 0; + case VT_GETHIFONTMASK: + return put_user(vc->vc_hi_font_mask, (unsigned short __user *)arg); default: return -ENOIOCTLCMD; } diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h index 269d000bb2a3..bea0255196c4 100644 --- a/include/linux/compat_ioctl.h +++ b/include/linux/compat_ioctl.h @@ -216,6 +216,7 @@ COMPATIBLE_IOCTL(VT_RESIZE) COMPATIBLE_IOCTL(VT_RESIZEX) COMPATIBLE_IOCTL(VT_LOCKSWITCH) COMPATIBLE_IOCTL(VT_UNLOCKSWITCH) +COMPATIBLE_IOCTL(VT_GETHIFONTMASK) /* Little p (/dev/rtc, /dev/envctrl, etc.) */ COMPATIBLE_IOCTL(RTC_AIE_ON) COMPATIBLE_IOCTL(RTC_AIE_OFF) diff --git a/include/linux/vt.h b/include/linux/vt.h index 8ab334a48222..ba806e8711be 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -60,5 +60,6 @@ struct vt_consize { #define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */ #define VT_LOCKSWITCH 0x560B /* disallow vt switching */ #define VT_UNLOCKSWITCH 0x560C /* allow vt switching */ +#define VT_GETHIFONTMASK 0x560D /* return hi font mask */ #endif /* _LINUX_VT_H */ -- cgit v1.2.2 From d015baebba44613ef59ddffeae2114fa4ede7104 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 27 Aug 2006 01:23:40 -0700 Subject: [PATCH] futex_find_get_task(): remove an obscure EXIT_ZOMBIE check futex_find_get_task: if (p->state == EXIT_ZOMBIE || p->exit_state == EXIT_ZOMBIE) return NULL; I can't understand this. First, p->state can't be EXIT_ZOMBIE. The ->exit_state check looks strange too. Sub-threads or tasks whose ->parent ignores SIGCHLD go directly to EXIT_DEAD state (I am ignoring a ptrace case). Why EXIT_DEAD tasks should be ok? Yes, EXIT_ZOMBIE is more important (a task may stay zombie for a long time), but this doesn't mean we should explicitely ignore other EXIT_XXX states. Signed-off-by: Oleg Nesterov Acked-by: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/futex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/futex.c b/kernel/futex.c index d4633c588f33..b9b8aea5389e 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -397,7 +397,7 @@ static struct task_struct * futex_find_get_task(pid_t pid) p = NULL; goto out_unlock; } - if (p->state == EXIT_ZOMBIE || p->exit_state == EXIT_ZOMBIE) { + if (p->exit_state != 0) { p = NULL; goto out_unlock; } -- cgit v1.2.2 From fb8d81e47783f9198f3d6248bd4c0d16a1d5424e Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Sun, 27 Aug 2006 01:23:41 -0700 Subject: [PATCH] MTD NAND: Fix ams-delta after core conversion The recent hwctrl core conversion for MTD NAND devices broke the Amstrad Delta driver. This fixes it up and uses the existing control line defines rather than unclear magic numbers. Signed-off-by: Jonathan McDowell Acked-by: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/nand/ams-delta.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index d7897dc6b3c8..a0ba07c36ee9 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -130,11 +130,13 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd, if (ctrl & NAND_CTRL_CHANGE) { unsigned long bits; - bits = (~ctrl & NAND_NCE) << 2; - bits |= (ctrl & NAND_CLE) << 7; - bits |= (ctrl & NAND_ALE) << 6; + bits = (~ctrl & NAND_NCE) ? AMS_DELTA_LATCH2_NAND_NCE : 0; + bits |= (ctrl & NAND_CLE) ? AMS_DELTA_LATCH2_NAND_CLE : 0; + bits |= (ctrl & NAND_ALE) ? AMS_DELTA_LATCH2_NAND_ALE : 0; - ams_delta_latch2_write(0xC2, bits); + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_CLE | + AMS_DELTA_LATCH2_NAND_ALE | + AMS_DELTA_LATCH2_NAND_NCE, bits); } if (cmd != NAND_CMD_NONE) -- cgit v1.2.2 From f5fb09fa3392ad43fbcfc2f4580752f383ab5996 Mon Sep 17 00:00:00 2001 From: Andries Brouwer Date: Sun, 27 Aug 2006 01:23:42 -0700 Subject: [PATCH] Fix for minix crash Mounting a (corrupt) minix filesystem with zero s_zmap_blocks gives a spectacular crash on my 2.6.17.8 system, no doubt because minix/inode.c does an unconditional minix_set_bit(0,sbi->s_zmap[0]->b_data); [akpm@osdl.org: make labels conistent while we're there] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/minix/inode.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/minix/inode.c b/fs/minix/inode.c index 9ea91c5eeb7b..330ff9fc7cf0 100644 --- a/fs/minix/inode.c +++ b/fs/minix/inode.c @@ -204,6 +204,8 @@ static int minix_fill_super(struct super_block *s, void *data, int silent) /* * Allocate the buffer map to keep the superblock small. */ + if (sbi->s_imap_blocks == 0 || sbi->s_zmap_blocks == 0) + goto out_illegal_sb; i = (sbi->s_imap_blocks + sbi->s_zmap_blocks) * sizeof(bh); map = kmalloc(i, GFP_KERNEL); if (!map) @@ -263,7 +265,7 @@ out_no_root: out_no_bitmap: printk("MINIX-fs: bad superblock or unable to read bitmaps\n"); - out_freemap: +out_freemap: for (i = 0; i < sbi->s_imap_blocks; i++) brelse(sbi->s_imap[i]); for (i = 0; i < sbi->s_zmap_blocks; i++) @@ -276,11 +278,16 @@ out_no_map: printk("MINIX-fs: can't allocate map\n"); goto out_release; +out_illegal_sb: + if (!silent) + printk("MINIX-fs: bad superblock\n"); + goto out_release; + out_no_fs: if (!silent) printk("VFS: Can't find a Minix or Minix V2 filesystem " "on device %s\n", s->s_id); - out_release: +out_release: brelse(bh); goto out; @@ -290,7 +297,7 @@ out_bad_hblock: out_bad_sb: printk("MINIX-fs: unable to read superblock\n"); - out: +out: s->s_fs_info = NULL; kfree(sbi); return -EINVAL; -- cgit v1.2.2 From 607eb266aea9dd2abe515985e12c5cd8b32546e8 Mon Sep 17 00:00:00 2001 From: Andries Brouwer Date: Sun, 27 Aug 2006 01:23:43 -0700 Subject: [PATCH] ext2: prevent div-by-zero on corrupted fs Mounting an ext2 filesystem with zero s_inodes_per_group will cause a divide error. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext2/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext2/super.c b/fs/ext2/super.c index f2702cda9779..681dea8f9532 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -775,7 +775,7 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent) if (EXT2_INODE_SIZE(sb) == 0) goto cantfind_ext2; sbi->s_inodes_per_block = sb->s_blocksize / EXT2_INODE_SIZE(sb); - if (sbi->s_inodes_per_block == 0) + if (sbi->s_inodes_per_block == 0 || sbi->s_inodes_per_group == 0) goto cantfind_ext2; sbi->s_itb_per_group = sbi->s_inodes_per_group / sbi->s_inodes_per_block; -- cgit v1.2.2 From 08fb306fe63d98eb86e3b16f4cc21816fa47f18e Mon Sep 17 00:00:00 2001 From: Mingming Cao Date: Sun, 27 Aug 2006 01:23:44 -0700 Subject: [PATCH] ext3 filesystem bogus ENOSPC with reservation fix To handle the earlier bogus ENOSPC error caused by filesystem full of block reservation, current code falls back to non block reservation, starts to allocate block(s) from the goal allocation block group as if there is no block reservation. Current code needs to re-load the corresponding block group descriptor for the initial goal block group in this case. The patch fixes this. Signed-off-by: Mingming Cao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext3/balloc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c index a504a40d6d29..063d994bda0b 100644 --- a/fs/ext3/balloc.c +++ b/fs/ext3/balloc.c @@ -1269,12 +1269,12 @@ ext3_fsblk_t ext3_new_blocks(handle_t *handle, struct inode *inode, goal = le32_to_cpu(es->s_first_data_block); group_no = (goal - le32_to_cpu(es->s_first_data_block)) / EXT3_BLOCKS_PER_GROUP(sb); + goal_group = group_no; +retry_alloc: gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); if (!gdp) goto io_error; - goal_group = group_no; -retry: free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); /* * if there is not enough free blocks to make a new resevation @@ -1349,7 +1349,7 @@ retry: if (my_rsv) { my_rsv = NULL; group_no = goal_group; - goto retry; + goto retry_alloc; } /* No space left on the device */ *errp = -ENOSPC; -- cgit v1.2.2 From c37336b078ba9d2ff38c535b194996a7ad6e69f8 Mon Sep 17 00:00:00 2001 From: Evgeniy Dushistov Date: Sun, 27 Aug 2006 01:23:45 -0700 Subject: [PATCH] ufs: write to hole in big file On UFS, this scenario: open(O_TRUNC) lseek(1024 * 1024 * 80) write("A") lseek(1024 * 2) write("A") may cause access to invalid address. This happened because of "goal" is calculated in wrong way in block allocation path, as I see this problem exists also in 2.4. We use construction like this i_data[lastfrag], i_data array of pointers to direct blocks, indirect and so on, it has ceratain size ~20 elements, and lastfrag may have value for example 40000. Also this patch fixes related to handling such scenario issues, wrong zeroing metadata, in case of block(not fragment) allocation, and wrong goal calculation, when we allocate block Signed-off-by: Evgeniy Dushistov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ufs/inode.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index e7c8615beb65..30c6e8a9446c 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -169,18 +169,20 @@ static void ufs_clear_frag(struct inode *inode, struct buffer_head *bh) static struct buffer_head * ufs_clear_frags(struct inode *inode, sector_t beg, - unsigned int n) + unsigned int n, sector_t want) { - struct buffer_head *res, *bh; + struct buffer_head *res = NULL, *bh; sector_t end = beg + n; - res = sb_getblk(inode->i_sb, beg); - ufs_clear_frag(inode, res); - for (++beg; beg < end; ++beg) { + for (; beg < end; ++beg) { bh = sb_getblk(inode->i_sb, beg); ufs_clear_frag(inode, bh); - brelse(bh); + if (want != beg) + brelse(bh); + else + res = bh; } + BUG_ON(!res); return res; } @@ -265,7 +267,9 @@ repeat: lastfrag = ufsi->i_lastfrag; } - goal = fs32_to_cpu(sb, ufsi->i_u1.i_data[lastblock]) + uspi->s_fpb; + tmp = fs32_to_cpu(sb, ufsi->i_u1.i_data[lastblock]); + if (tmp) + goal = tmp + uspi->s_fpb; tmp = ufs_new_fragments (inode, p, fragment - blockoff, goal, required + blockoff, err, locked_page); @@ -277,13 +281,15 @@ repeat: tmp = ufs_new_fragments(inode, p, fragment - (blockoff - lastblockoff), fs32_to_cpu(sb, *p), required + (blockoff - lastblockoff), err, locked_page); - } + } else /* (lastblock > block) */ { /* * We will allocate new block before last allocated block */ - else /* (lastblock > block) */ { - if (lastblock && (tmp = fs32_to_cpu(sb, ufsi->i_u1.i_data[lastblock-1]))) - goal = tmp + uspi->s_fpb; + if (block) { + tmp = fs32_to_cpu(sb, ufsi->i_u1.i_data[block-1]); + if (tmp) + goal = tmp + uspi->s_fpb; + } tmp = ufs_new_fragments(inode, p, fragment - blockoff, goal, uspi->s_fpb, err, locked_page); } @@ -296,7 +302,7 @@ repeat: } if (!phys) { - result = ufs_clear_frags(inode, tmp + blockoff, required); + result = ufs_clear_frags(inode, tmp, required, tmp + blockoff); } else { *phys = tmp + blockoff; result = NULL; @@ -383,7 +389,7 @@ repeat: } } - if (block && (tmp = fs32_to_cpu(sb, ((__fs32*)bh->b_data)[block-1]) + uspi->s_fpb)) + if (block && (tmp = fs32_to_cpu(sb, ((__fs32*)bh->b_data)[block-1]))) goal = tmp + uspi->s_fpb; else goal = bh->b_blocknr + uspi->s_fpb; @@ -397,7 +403,8 @@ repeat: if (!phys) { - result = ufs_clear_frags(inode, tmp + blockoff, uspi->s_fpb); + result = ufs_clear_frags(inode, tmp, uspi->s_fpb, + tmp + blockoff); } else { *phys = tmp + blockoff; *new = 1; -- cgit v1.2.2 From ecdc63948763586e101108dfe1ba316ec069fe39 Mon Sep 17 00:00:00 2001 From: Evgeniy Dushistov Date: Sun, 27 Aug 2006 01:23:46 -0700 Subject: [PATCH] ufs: truncate correction 1) When we allocated last fragment in ufs_truncate, we read page, check if block mapped to address, and if not trying to allocate it. This is wrong behaviour, fragment may be NOT allocated, but mapped, this happened because of "block map" function not checked allocated fragment or not, it just take address of the first fragment in the block, add offset of fragment and return result, this is correct behaviour in almost all situation except call from ufs_truncate. 2) Almost all implementation of UFS, which I can investigate have such "defect": if you have full disk, and try truncate file, for example 3GB to 2MB, and have hole in this region, truncate return -ENOSPC. I tried evade from this problem, but "block allocation" algorithm is tied to right value of i_lastfrag, and fix of this corner case may slow down of ordinaries scenarios, so this patch makes behavior of "truncate" operations similar to what other UFS implementations do. Signed-off-by: Evgeniy Dushistov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ufs/truncate.c | 77 ++++++++++++++++++------------------------------------- 1 file changed, 25 insertions(+), 52 deletions(-) diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c index c9b55872079b..ea11d04c41a0 100644 --- a/fs/ufs/truncate.c +++ b/fs/ufs/truncate.c @@ -375,17 +375,15 @@ static int ufs_alloc_lastblock(struct inode *inode) int err = 0; struct address_space *mapping = inode->i_mapping; struct ufs_sb_private_info *uspi = UFS_SB(inode->i_sb)->s_uspi; - struct ufs_inode_info *ufsi = UFS_I(inode); unsigned lastfrag, i, end; struct page *lastpage; struct buffer_head *bh; lastfrag = (i_size_read(inode) + uspi->s_fsize - 1) >> uspi->s_fshift; - if (!lastfrag) { - ufsi->i_lastfrag = 0; + if (!lastfrag) goto out; - } + lastfrag--; lastpage = ufs_get_locked_page(mapping, lastfrag >> @@ -400,25 +398,25 @@ static int ufs_alloc_lastblock(struct inode *inode) for (i = 0; i < end; ++i) bh = bh->b_this_page; - if (!buffer_mapped(bh)) { - err = ufs_getfrag_block(inode, lastfrag, bh, 1); - - if (unlikely(err)) - goto out_unlock; - - if (buffer_new(bh)) { - clear_buffer_new(bh); - unmap_underlying_metadata(bh->b_bdev, - bh->b_blocknr); - /* - * we do not zeroize fragment, because of - * if it maped to hole, it already contains zeroes - */ - set_buffer_uptodate(bh); - mark_buffer_dirty(bh); - set_page_dirty(lastpage); - } + + err = ufs_getfrag_block(inode, lastfrag, bh, 1); + + if (unlikely(err)) + goto out_unlock; + + if (buffer_new(bh)) { + clear_buffer_new(bh); + unmap_underlying_metadata(bh->b_bdev, + bh->b_blocknr); + /* + * we do not zeroize fragment, because of + * if it maped to hole, it already contains zeroes + */ + set_buffer_uptodate(bh); + mark_buffer_dirty(bh); + set_page_dirty(lastpage); } + out_unlock: ufs_put_locked_page(lastpage); out: @@ -440,23 +438,11 @@ int ufs_truncate(struct inode *inode, loff_t old_i_size) if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) return -EPERM; - if (inode->i_size > old_i_size) { - /* - * if we expand file we should care about - * allocation of block for last byte first of all - */ - err = ufs_alloc_lastblock(inode); + err = ufs_alloc_lastblock(inode); - if (err) { - i_size_write(inode, old_i_size); - goto out; - } - /* - * go away, because of we expand file, and we do not - * need free blocks, and zeroizes page - */ - lock_kernel(); - goto almost_end; + if (err) { + i_size_write(inode, old_i_size); + goto out; } block_truncate_page(inode->i_mapping, inode->i_size, ufs_getfrag_block); @@ -477,21 +463,8 @@ int ufs_truncate(struct inode *inode, loff_t old_i_size) yield(); } - if (inode->i_size < old_i_size) { - /* - * now we should have enough space - * to allocate block for last byte - */ - err = ufs_alloc_lastblock(inode); - if (err) - /* - * looks like all the same - we have no space, - * but we truncate file already - */ - inode->i_size = (ufsi->i_lastfrag - 1) * uspi->s_fsize; - } -almost_end: inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC; + ufsi->i_lastfrag = DIRECT_FRAGMENT; unlock_kernel(); mark_inode_dirty(inode); out: -- cgit v1.2.2 From 4edb9a143e31d2e191c199262226e1a5923ff8f7 Mon Sep 17 00:00:00 2001 From: Yingchao Zhou Date: Sun, 27 Aug 2006 01:23:46 -0700 Subject: [PATCH] Remove redundant up() in stop_machine() An up() is called in kernel/stop_machine.c on failure, and also in the caller (unconditionally). Signed-off-by: Zhou Yingchao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/stop_machine.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index dcfb5d731466..51cacd111dbd 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -111,7 +111,6 @@ static int stop_machine(void) /* If some failed, kill them all. */ if (ret < 0) { stopmachine_set_state(STOPMACHINE_EXIT); - up(&stopmachine_mutex); return ret; } -- cgit v1.2.2 From e88d78f6ba50d773096e26ca3f5c2464853c682d Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Sun, 27 Aug 2006 01:23:47 -0700 Subject: [PATCH] Documentation update for relay interface Here's updated documentation for the relay interface, rewritten to match the relayfs->relay changes. It also moves relayfs.txt to relay.txt in the process. It includes the changes to relayfs.txt previously posted by Randy Dunlap, thanks for those. The relay-apps examples have also been updated to match, and can be found on the sourceforge relayfs website. Signed-off-by: Tom Zanussi Cc: "Randy.Dunlap" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/00-INDEX | 4 +- Documentation/filesystems/relay.txt | 479 ++++++++++++++++++++++++++++++++++ Documentation/filesystems/relayfs.txt | 442 ------------------------------- 3 files changed, 481 insertions(+), 444 deletions(-) create mode 100644 Documentation/filesystems/relay.txt delete mode 100644 Documentation/filesystems/relayfs.txt diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 66fdc0744fe0..16dec61d7671 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -62,8 +62,8 @@ ramfs-rootfs-initramfs.txt - info on the 'in memory' filesystems ramfs, rootfs and initramfs. reiser4.txt - info on the Reiser4 filesystem based on dancing tree algorithms. -relayfs.txt - - info on relayfs, for efficient streaming from kernel to user space. +relay.txt + - info on relay, for efficient streaming from kernel to user space. romfs.txt - description of the ROMFS filesystem. smbfs.txt diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt new file mode 100644 index 000000000000..d6788dae0349 --- /dev/null +++ b/Documentation/filesystems/relay.txt @@ -0,0 +1,479 @@ +relay interface (formerly relayfs) +================================== + +The relay interface provides a means for kernel applications to +efficiently log and transfer large quantities of data from the kernel +to userspace via user-defined 'relay channels'. + +A 'relay channel' is a kernel->user data relay mechanism implemented +as a set of per-cpu kernel buffers ('channel buffers'), each +represented as a regular file ('relay file') in user space. Kernel +clients write into the channel buffers using efficient write +functions; these automatically log into the current cpu's channel +buffer. User space applications mmap() or read() from the relay files +and retrieve the data as it becomes available. The relay files +themselves are files created in a host filesystem, e.g. debugfs, and +are associated with the channel buffers using the API described below. + +The format of the data logged into the channel buffers is completely +up to the kernel client; the relay interface does however provide +hooks which allow kernel clients to impose some structure on the +buffer data. The relay interface doesn't implement any form of data +filtering - this also is left to the kernel client. The purpose is to +keep things as simple as possible. + +This document provides an overview of the relay interface API. The +details of the function parameters are documented along with the +functions in the relay interface code - please see that for details. + +Semantics +========= + +Each relay channel has one buffer per CPU, each buffer has one or more +sub-buffers. Messages are written to the first sub-buffer until it is +too full to contain a new message, in which case it it is written to +the next (if available). Messages are never split across sub-buffers. +At this point, userspace can be notified so it empties the first +sub-buffer, while the kernel continues writing to the next. + +When notified that a sub-buffer is full, the kernel knows how many +bytes of it are padding i.e. unused space occurring because a complete +message couldn't fit into a sub-buffer. Userspace can use this +knowledge to copy only valid data. + +After copying it, userspace can notify the kernel that a sub-buffer +has been consumed. + +A relay channel can operate in a mode where it will overwrite data not +yet collected by userspace, and not wait for it to be consumed. + +The relay channel itself does not provide for communication of such +data between userspace and kernel, allowing the kernel side to remain +simple and not impose a single interface on userspace. It does +provide a set of examples and a separate helper though, described +below. + +The read() interface both removes padding and internally consumes the +read sub-buffers; thus in cases where read(2) is being used to drain +the channel buffers, special-purpose communication between kernel and +user isn't necessary for basic operation. + +One of the major goals of the relay interface is to provide a low +overhead mechanism for conveying kernel data to userspace. While the +read() interface is easy to use, it's not as efficient as the mmap() +approach; the example code attempts to make the tradeoff between the +two approaches as small as possible. + +klog and relay-apps example code +================================ + +The relay interface itself is ready to use, but to make things easier, +a couple simple utility functions and a set of examples are provided. + +The relay-apps example tarball, available on the relay sourceforge +site, contains a set of self-contained examples, each consisting of a +pair of .c files containing boilerplate code for each of the user and +kernel sides of a relay application. When combined these two sets of +boilerplate code provide glue to easily stream data to disk, without +having to bother with mundane housekeeping chores. + +The 'klog debugging functions' patch (klog.patch in the relay-apps +tarball) provides a couple of high-level logging functions to the +kernel which allow writing formatted text or raw data to a channel, +regardless of whether a channel to write into exists or not, or even +whether the relay interface is compiled into the kernel or not. These +functions allow you to put unconditional 'trace' statements anywhere +in the kernel or kernel modules; only when there is a 'klog handler' +registered will data actually be logged (see the klog and kleak +examples for details). + +It is of course possible to use the relay interface from scratch, +i.e. without using any of the relay-apps example code or klog, but +you'll have to implement communication between userspace and kernel, +allowing both to convey the state of buffers (full, empty, amount of +padding). The read() interface both removes padding and internally +consumes the read sub-buffers; thus in cases where read(2) is being +used to drain the channel buffers, special-purpose communication +between kernel and user isn't necessary for basic operation. Things +such as buffer-full conditions would still need to be communicated via +some channel though. + +klog and the relay-apps examples can be found in the relay-apps +tarball on http://relayfs.sourceforge.net + +The relay interface user space API +================================== + +The relay interface implements basic file operations for user space +access to relay channel buffer data. Here are the file operations +that are available and some comments regarding their behavior: + +open() enables user to open an _existing_ channel buffer. + +mmap() results in channel buffer being mapped into the caller's + memory space. Note that you can't do a partial mmap - you + must map the entire file, which is NRBUF * SUBBUFSIZE. + +read() read the contents of a channel buffer. The bytes read are + 'consumed' by the reader, i.e. they won't be available + again to subsequent reads. If the channel is being used + in no-overwrite mode (the default), it can be read at any + time even if there's an active kernel writer. If the + channel is being used in overwrite mode and there are + active channel writers, results may be unpredictable - + users should make sure that all logging to the channel has + ended before using read() with overwrite mode. Sub-buffer + padding is automatically removed and will not be seen by + the reader. + +sendfile() transfer data from a channel buffer to an output file + descriptor. Sub-buffer padding is automatically removed + and will not be seen by the reader. + +poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are + notified when sub-buffer boundaries are crossed. + +close() decrements the channel buffer's refcount. When the refcount + reaches 0, i.e. when no process or kernel client has the + buffer open, the channel buffer is freed. + +In order for a user application to make use of relay files, the +host filesystem must be mounted. For example, + + mount -t debugfs debugfs /debug + +NOTE: the host filesystem doesn't need to be mounted for kernel + clients to create or use channels - it only needs to be + mounted when user space applications need access to the buffer + data. + + +The relay interface kernel API +============================== + +Here's a summary of the API the relay interface provides to in-kernel clients: + +TBD(curr. line MT:/API/) + channel management functions: + + relay_open(base_filename, parent, subbuf_size, n_subbufs, + callbacks) + relay_close(chan) + relay_flush(chan) + relay_reset(chan) + + channel management typically called on instigation of userspace: + + relay_subbufs_consumed(chan, cpu, subbufs_consumed) + + write functions: + + relay_write(chan, data, length) + __relay_write(chan, data, length) + relay_reserve(chan, length) + + callbacks: + + subbuf_start(buf, subbuf, prev_subbuf, prev_padding) + buf_mapped(buf, filp) + buf_unmapped(buf, filp) + create_buf_file(filename, parent, mode, buf, is_global) + remove_buf_file(dentry) + + helper functions: + + relay_buf_full(buf) + subbuf_start_reserve(buf, length) + + +Creating a channel +------------------ + +relay_open() is used to create a channel, along with its per-cpu +channel buffers. Each channel buffer will have an associated file +created for it in the host filesystem, which can be and mmapped or +read from in user space. The files are named basename0...basenameN-1 +where N is the number of online cpus, and by default will be created +in the root of the filesystem (if the parent param is NULL). If you +want a directory structure to contain your relay files, you should +create it using the host filesystem's directory creation function, +e.g. debugfs_create_dir(), and pass the parent directory to +relay_open(). Users are responsible for cleaning up any directory +structure they create, when the channel is closed - again the host +filesystem's directory removal functions should be used for that, +e.g. debugfs_remove(). + +In order for a channel to be created and the host filesystem's files +associated with its channel buffers, the user must provide definitions +for two callback functions, create_buf_file() and remove_buf_file(). +create_buf_file() is called once for each per-cpu buffer from +relay_open() and allows the user to create the file which will be used +to represent the corresponding channel buffer. The callback should +return the dentry of the file created to represent the channel buffer. +remove_buf_file() must also be defined; it's responsible for deleting +the file(s) created in create_buf_file() and is called during +relay_close(). + +Here are some typical definitions for these callbacks, in this case +using debugfs: + +/* + * create_buf_file() callback. Creates relay file in debugfs. + */ +static struct dentry *create_buf_file_handler(const char *filename, + struct dentry *parent, + int mode, + struct rchan_buf *buf, + int *is_global) +{ + return debugfs_create_file(filename, mode, parent, buf, + &relay_file_operations); +} + +/* + * remove_buf_file() callback. Removes relay file from debugfs. + */ +static int remove_buf_file_handler(struct dentry *dentry) +{ + debugfs_remove(dentry); + + return 0; +} + +/* + * relay interface callbacks + */ +static struct rchan_callbacks relay_callbacks = +{ + .create_buf_file = create_buf_file_handler, + .remove_buf_file = remove_buf_file_handler, +}; + +And an example relay_open() invocation using them: + + chan = relay_open("cpu", NULL, SUBBUF_SIZE, N_SUBBUFS, &relay_callbacks); + +If the create_buf_file() callback fails, or isn't defined, channel +creation and thus relay_open() will fail. + +The total size of each per-cpu buffer is calculated by multiplying the +number of sub-buffers by the sub-buffer size passed into relay_open(). +The idea behind sub-buffers is that they're basically an extension of +double-buffering to N buffers, and they also allow applications to +easily implement random-access-on-buffer-boundary schemes, which can +be important for some high-volume applications. The number and size +of sub-buffers is completely dependent on the application and even for +the same application, different conditions will warrant different +values for these parameters at different times. Typically, the right +values to use are best decided after some experimentation; in general, +though, it's safe to assume that having only 1 sub-buffer is a bad +idea - you're guaranteed to either overwrite data or lose events +depending on the channel mode being used. + +The create_buf_file() implementation can also be defined in such a way +as to allow the creation of a single 'global' buffer instead of the +default per-cpu set. This can be useful for applications interested +mainly in seeing the relative ordering of system-wide events without +the need to bother with saving explicit timestamps for the purpose of +merging/sorting per-cpu files in a postprocessing step. + +To have relay_open() create a global buffer, the create_buf_file() +implementation should set the value of the is_global outparam to a +non-zero value in addition to creating the file that will be used to +represent the single buffer. In the case of a global buffer, +create_buf_file() and remove_buf_file() will be called only once. The +normal channel-writing functions, e.g. relay_write(), can still be +used - writes from any cpu will transparently end up in the global +buffer - but since it is a global buffer, callers should make sure +they use the proper locking for such a buffer, either by wrapping +writes in a spinlock, or by copying a write function from relay.h and +creating a local version that internally does the proper locking. + +Channel 'modes' +--------------- + +relay channels can be used in either of two modes - 'overwrite' or +'no-overwrite'. The mode is entirely determined by the implementation +of the subbuf_start() callback, as described below. The default if no +subbuf_start() callback is defined is 'no-overwrite' mode. If the +default mode suits your needs, and you plan to use the read() +interface to retrieve channel data, you can ignore the details of this +section, as it pertains mainly to mmap() implementations. + +In 'overwrite' mode, also known as 'flight recorder' mode, writes +continuously cycle around the buffer and will never fail, but will +unconditionally overwrite old data regardless of whether it's actually +been consumed. In no-overwrite mode, writes will fail, i.e. data will +be lost, if the number of unconsumed sub-buffers equals the total +number of sub-buffers in the channel. It should be clear that if +there is no consumer or if the consumer can't consume sub-buffers fast +enough, data will be lost in either case; the only difference is +whether data is lost from the beginning or the end of a buffer. + +As explained above, a relay channel is made of up one or more +per-cpu channel buffers, each implemented as a circular buffer +subdivided into one or more sub-buffers. Messages are written into +the current sub-buffer of the channel's current per-cpu buffer via the +write functions described below. Whenever a message can't fit into +the current sub-buffer, because there's no room left for it, the +client is notified via the subbuf_start() callback that a switch to a +new sub-buffer is about to occur. The client uses this callback to 1) +initialize the next sub-buffer if appropriate 2) finalize the previous +sub-buffer if appropriate and 3) return a boolean value indicating +whether or not to actually move on to the next sub-buffer. + +To implement 'no-overwrite' mode, the userspace client would provide +an implementation of the subbuf_start() callback something like the +following: + +static int subbuf_start(struct rchan_buf *buf, + void *subbuf, + void *prev_subbuf, + unsigned int prev_padding) +{ + if (prev_subbuf) + *((unsigned *)prev_subbuf) = prev_padding; + + if (relay_buf_full(buf)) + return 0; + + subbuf_start_reserve(buf, sizeof(unsigned int)); + + return 1; +} + +If the current buffer is full, i.e. all sub-buffers remain unconsumed, +the callback returns 0 to indicate that the buffer switch should not +occur yet, i.e. until the consumer has had a chance to read the +current set of ready sub-buffers. For the relay_buf_full() function +to make sense, the consumer is reponsible for notifying the relay +interface when sub-buffers have been consumed via +relay_subbufs_consumed(). Any subsequent attempts to write into the +buffer will again invoke the subbuf_start() callback with the same +parameters; only when the consumer has consumed one or more of the +ready sub-buffers will relay_buf_full() return 0, in which case the +buffer switch can continue. + +The implementation of the subbuf_start() callback for 'overwrite' mode +would be very similar: + +static int subbuf_start(struct rchan_buf *buf, + void *subbuf, + void *prev_subbuf, + unsigned int prev_padding) +{ + if (prev_subbuf) + *((unsigned *)prev_subbuf) = prev_padding; + + subbuf_start_reserve(buf, sizeof(unsigned int)); + + return 1; +} + +In this case, the relay_buf_full() check is meaningless and the +callback always returns 1, causing the buffer switch to occur +unconditionally. It's also meaningless for the client to use the +relay_subbufs_consumed() function in this mode, as it's never +consulted. + +The default subbuf_start() implementation, used if the client doesn't +define any callbacks, or doesn't define the subbuf_start() callback, +implements the simplest possible 'no-overwrite' mode, i.e. it does +nothing but return 0. + +Header information can be reserved at the beginning of each sub-buffer +by calling the subbuf_start_reserve() helper function from within the +subbuf_start() callback. This reserved area can be used to store +whatever information the client wants. In the example above, room is +reserved in each sub-buffer to store the padding count for that +sub-buffer. This is filled in for the previous sub-buffer in the +subbuf_start() implementation; the padding value for the previous +sub-buffer is passed into the subbuf_start() callback along with a +pointer to the previous sub-buffer, since the padding value isn't +known until a sub-buffer is filled. The subbuf_start() callback is +also called for the first sub-buffer when the channel is opened, to +give the client a chance to reserve space in it. In this case the +previous sub-buffer pointer passed into the callback will be NULL, so +the client should check the value of the prev_subbuf pointer before +writing into the previous sub-buffer. + +Writing to a channel +-------------------- + +Kernel clients write data into the current cpu's channel buffer using +relay_write() or __relay_write(). relay_write() is the main logging +function - it uses local_irqsave() to protect the buffer and should be +used if you might be logging from interrupt context. If you know +you'll never be logging from interrupt context, you can use +__relay_write(), which only disables preemption. These functions +don't return a value, so you can't determine whether or not they +failed - the assumption is that you wouldn't want to check a return +value in the fast logging path anyway, and that they'll always succeed +unless the buffer is full and no-overwrite mode is being used, in +which case you can detect a failed write in the subbuf_start() +callback by calling the relay_buf_full() helper function. + +relay_reserve() is used to reserve a slot in a channel buffer which +can be written to later. This would typically be used in applications +that need to write directly into a channel buffer without having to +stage data in a temporary buffer beforehand. Because the actual write +may not happen immediately after the slot is reserved, applications +using relay_reserve() can keep a count of the number of bytes actually +written, either in space reserved in the sub-buffers themselves or as +a separate array. See the 'reserve' example in the relay-apps tarball +at http://relayfs.sourceforge.net for an example of how this can be +done. Because the write is under control of the client and is +separated from the reserve, relay_reserve() doesn't protect the buffer +at all - it's up to the client to provide the appropriate +synchronization when using relay_reserve(). + +Closing a channel +----------------- + +The client calls relay_close() when it's finished using the channel. +The channel and its associated buffers are destroyed when there are no +longer any references to any of the channel buffers. relay_flush() +forces a sub-buffer switch on all the channel buffers, and can be used +to finalize and process the last sub-buffers before the channel is +closed. + +Misc +---- + +Some applications may want to keep a channel around and re-use it +rather than open and close a new channel for each use. relay_reset() +can be used for this purpose - it resets a channel to its initial +state without reallocating channel buffer memory or destroying +existing mappings. It should however only be called when it's safe to +do so, i.e. when the channel isn't currently being written to. + +Finally, there are a couple of utility callbacks that can be used for +different purposes. buf_mapped() is called whenever a channel buffer +is mmapped from user space and buf_unmapped() is called when it's +unmapped. The client can use this notification to trigger actions +within the kernel application, such as enabling/disabling logging to +the channel. + + +Resources +========= + +For news, example code, mailing list, etc. see the relay interface homepage: + + http://relayfs.sourceforge.net + + +Credits +======= + +The ideas and specs for the relay interface came about as a result of +discussions on tracing involving the following: + +Michel Dagenais +Richard Moore +Bob Wisniewski +Karim Yaghmour +Tom Zanussi + +Also thanks to Hubertus Franke for a lot of useful suggestions and bug +reports. diff --git a/Documentation/filesystems/relayfs.txt b/Documentation/filesystems/relayfs.txt deleted file mode 100644 index 5832377b7340..000000000000 --- a/Documentation/filesystems/relayfs.txt +++ /dev/null @@ -1,442 +0,0 @@ - -relayfs - a high-speed data relay filesystem -============================================ - -relayfs is a filesystem designed to provide an efficient mechanism for -tools and facilities to relay large and potentially sustained streams -of data from kernel space to user space. - -The main abstraction of relayfs is the 'channel'. A channel consists -of a set of per-cpu kernel buffers each represented by a file in the -relayfs filesystem. Kernel clients write into a channel using -efficient write functions which automatically log to the current cpu's -channel buffer. User space applications mmap() the per-cpu files and -retrieve the data as it becomes available. - -The format of the data logged into the channel buffers is completely -up to the relayfs client; relayfs does however provide hooks which -allow clients to impose some structure on the buffer data. Nor does -relayfs implement any form of data filtering - this also is left to -the client. The purpose is to keep relayfs as simple as possible. - -This document provides an overview of the relayfs API. The details of -the function parameters are documented along with the functions in the -filesystem code - please see that for details. - -Semantics -========= - -Each relayfs channel has one buffer per CPU, each buffer has one or -more sub-buffers. Messages are written to the first sub-buffer until -it is too full to contain a new message, in which case it it is -written to the next (if available). Messages are never split across -sub-buffers. At this point, userspace can be notified so it empties -the first sub-buffer, while the kernel continues writing to the next. - -When notified that a sub-buffer is full, the kernel knows how many -bytes of it are padding i.e. unused. Userspace can use this knowledge -to copy only valid data. - -After copying it, userspace can notify the kernel that a sub-buffer -has been consumed. - -relayfs can operate in a mode where it will overwrite data not yet -collected by userspace, and not wait for it to consume it. - -relayfs itself does not provide for communication of such data between -userspace and kernel, allowing the kernel side to remain simple and -not impose a single interface on userspace. It does provide a set of -examples and a separate helper though, described below. - -klog and relay-apps example code -================================ - -relayfs itself is ready to use, but to make things easier, a couple -simple utility functions and a set of examples are provided. - -The relay-apps example tarball, available on the relayfs sourceforge -site, contains a set of self-contained examples, each consisting of a -pair of .c files containing boilerplate code for each of the user and -kernel sides of a relayfs application; combined these two sets of -boilerplate code provide glue to easily stream data to disk, without -having to bother with mundane housekeeping chores. - -The 'klog debugging functions' patch (klog.patch in the relay-apps -tarball) provides a couple of high-level logging functions to the -kernel which allow writing formatted text or raw data to a channel, -regardless of whether a channel to write into exists or not, or -whether relayfs is compiled into the kernel or is configured as a -module. These functions allow you to put unconditional 'trace' -statements anywhere in the kernel or kernel modules; only when there -is a 'klog handler' registered will data actually be logged (see the -klog and kleak examples for details). - -It is of course possible to use relayfs from scratch i.e. without -using any of the relay-apps example code or klog, but you'll have to -implement communication between userspace and kernel, allowing both to -convey the state of buffers (full, empty, amount of padding). - -klog and the relay-apps examples can be found in the relay-apps -tarball on http://relayfs.sourceforge.net - - -The relayfs user space API -========================== - -relayfs implements basic file operations for user space access to -relayfs channel buffer data. Here are the file operations that are -available and some comments regarding their behavior: - -open() enables user to open an _existing_ buffer. - -mmap() results in channel buffer being mapped into the caller's - memory space. Note that you can't do a partial mmap - you must - map the entire file, which is NRBUF * SUBBUFSIZE. - -read() read the contents of a channel buffer. The bytes read are - 'consumed' by the reader i.e. they won't be available again - to subsequent reads. If the channel is being used in - no-overwrite mode (the default), it can be read at any time - even if there's an active kernel writer. If the channel is - being used in overwrite mode and there are active channel - writers, results may be unpredictable - users should make - sure that all logging to the channel has ended before using - read() with overwrite mode. - -poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are - notified when sub-buffer boundaries are crossed. - -close() decrements the channel buffer's refcount. When the refcount - reaches 0 i.e. when no process or kernel client has the buffer - open, the channel buffer is freed. - - -In order for a user application to make use of relayfs files, the -relayfs filesystem must be mounted. For example, - - mount -t relayfs relayfs /mnt/relay - -NOTE: relayfs doesn't need to be mounted for kernel clients to create - or use channels - it only needs to be mounted when user space - applications need access to the buffer data. - - -The relayfs kernel API -====================== - -Here's a summary of the API relayfs provides to in-kernel clients: - - - channel management functions: - - relay_open(base_filename, parent, subbuf_size, n_subbufs, - callbacks) - relay_close(chan) - relay_flush(chan) - relay_reset(chan) - relayfs_create_dir(name, parent) - relayfs_remove_dir(dentry) - relayfs_create_file(name, parent, mode, fops, data) - relayfs_remove_file(dentry) - - channel management typically called on instigation of userspace: - - relay_subbufs_consumed(chan, cpu, subbufs_consumed) - - write functions: - - relay_write(chan, data, length) - __relay_write(chan, data, length) - relay_reserve(chan, length) - - callbacks: - - subbuf_start(buf, subbuf, prev_subbuf, prev_padding) - buf_mapped(buf, filp) - buf_unmapped(buf, filp) - create_buf_file(filename, parent, mode, buf, is_global) - remove_buf_file(dentry) - - helper functions: - - relay_buf_full(buf) - subbuf_start_reserve(buf, length) - - -Creating a channel ------------------- - -relay_open() is used to create a channel, along with its per-cpu -channel buffers. Each channel buffer will have an associated file -created for it in the relayfs filesystem, which can be opened and -mmapped from user space if desired. The files are named -basename0...basenameN-1 where N is the number of online cpus, and by -default will be created in the root of the filesystem. If you want a -directory structure to contain your relayfs files, you can create it -with relayfs_create_dir() and pass the parent directory to -relay_open(). Clients are responsible for cleaning up any directory -structure they create when the channel is closed - use -relayfs_remove_dir() for that. - -The total size of each per-cpu buffer is calculated by multiplying the -number of sub-buffers by the sub-buffer size passed into relay_open(). -The idea behind sub-buffers is that they're basically an extension of -double-buffering to N buffers, and they also allow applications to -easily implement random-access-on-buffer-boundary schemes, which can -be important for some high-volume applications. The number and size -of sub-buffers is completely dependent on the application and even for -the same application, different conditions will warrant different -values for these parameters at different times. Typically, the right -values to use are best decided after some experimentation; in general, -though, it's safe to assume that having only 1 sub-buffer is a bad -idea - you're guaranteed to either overwrite data or lose events -depending on the channel mode being used. - -Channel 'modes' ---------------- - -relayfs channels can be used in either of two modes - 'overwrite' or -'no-overwrite'. The mode is entirely determined by the implementation -of the subbuf_start() callback, as described below. In 'overwrite' -mode, also known as 'flight recorder' mode, writes continuously cycle -around the buffer and will never fail, but will unconditionally -overwrite old data regardless of whether it's actually been consumed. -In no-overwrite mode, writes will fail i.e. data will be lost, if the -number of unconsumed sub-buffers equals the total number of -sub-buffers in the channel. It should be clear that if there is no -consumer or if the consumer can't consume sub-buffers fast enought, -data will be lost in either case; the only difference is whether data -is lost from the beginning or the end of a buffer. - -As explained above, a relayfs channel is made of up one or more -per-cpu channel buffers, each implemented as a circular buffer -subdivided into one or more sub-buffers. Messages are written into -the current sub-buffer of the channel's current per-cpu buffer via the -write functions described below. Whenever a message can't fit into -the current sub-buffer, because there's no room left for it, the -client is notified via the subbuf_start() callback that a switch to a -new sub-buffer is about to occur. The client uses this callback to 1) -initialize the next sub-buffer if appropriate 2) finalize the previous -sub-buffer if appropriate and 3) return a boolean value indicating -whether or not to actually go ahead with the sub-buffer switch. - -To implement 'no-overwrite' mode, the userspace client would provide -an implementation of the subbuf_start() callback something like the -following: - -static int subbuf_start(struct rchan_buf *buf, - void *subbuf, - void *prev_subbuf, - unsigned int prev_padding) -{ - if (prev_subbuf) - *((unsigned *)prev_subbuf) = prev_padding; - - if (relay_buf_full(buf)) - return 0; - - subbuf_start_reserve(buf, sizeof(unsigned int)); - - return 1; -} - -If the current buffer is full i.e. all sub-buffers remain unconsumed, -the callback returns 0 to indicate that the buffer switch should not -occur yet i.e. until the consumer has had a chance to read the current -set of ready sub-buffers. For the relay_buf_full() function to make -sense, the consumer is reponsible for notifying relayfs when -sub-buffers have been consumed via relay_subbufs_consumed(). Any -subsequent attempts to write into the buffer will again invoke the -subbuf_start() callback with the same parameters; only when the -consumer has consumed one or more of the ready sub-buffers will -relay_buf_full() return 0, in which case the buffer switch can -continue. - -The implementation of the subbuf_start() callback for 'overwrite' mode -would be very similar: - -static int subbuf_start(struct rchan_buf *buf, - void *subbuf, - void *prev_subbuf, - unsigned int prev_padding) -{ - if (prev_subbuf) - *((unsigned *)prev_subbuf) = prev_padding; - - subbuf_start_reserve(buf, sizeof(unsigned int)); - - return 1; -} - -In this case, the relay_buf_full() check is meaningless and the -callback always returns 1, causing the buffer switch to occur -unconditionally. It's also meaningless for the client to use the -relay_subbufs_consumed() function in this mode, as it's never -consulted. - -The default subbuf_start() implementation, used if the client doesn't -define any callbacks, or doesn't define the subbuf_start() callback, -implements the simplest possible 'no-overwrite' mode i.e. it does -nothing but return 0. - -Header information can be reserved at the beginning of each sub-buffer -by calling the subbuf_start_reserve() helper function from within the -subbuf_start() callback. This reserved area can be used to store -whatever information the client wants. In the example above, room is -reserved in each sub-buffer to store the padding count for that -sub-buffer. This is filled in for the previous sub-buffer in the -subbuf_start() implementation; the padding value for the previous -sub-buffer is passed into the subbuf_start() callback along with a -pointer to the previous sub-buffer, since the padding value isn't -known until a sub-buffer is filled. The subbuf_start() callback is -also called for the first sub-buffer when the channel is opened, to -give the client a chance to reserve space in it. In this case the -previous sub-buffer pointer passed into the callback will be NULL, so -the client should check the value of the prev_subbuf pointer before -writing into the previous sub-buffer. - -Writing to a channel --------------------- - -kernel clients write data into the current cpu's channel buffer using -relay_write() or __relay_write(). relay_write() is the main logging -function - it uses local_irqsave() to protect the buffer and should be -used if you might be logging from interrupt context. If you know -you'll never be logging from interrupt context, you can use -__relay_write(), which only disables preemption. These functions -don't return a value, so you can't determine whether or not they -failed - the assumption is that you wouldn't want to check a return -value in the fast logging path anyway, and that they'll always succeed -unless the buffer is full and no-overwrite mode is being used, in -which case you can detect a failed write in the subbuf_start() -callback by calling the relay_buf_full() helper function. - -relay_reserve() is used to reserve a slot in a channel buffer which -can be written to later. This would typically be used in applications -that need to write directly into a channel buffer without having to -stage data in a temporary buffer beforehand. Because the actual write -may not happen immediately after the slot is reserved, applications -using relay_reserve() can keep a count of the number of bytes actually -written, either in space reserved in the sub-buffers themselves or as -a separate array. See the 'reserve' example in the relay-apps tarball -at http://relayfs.sourceforge.net for an example of how this can be -done. Because the write is under control of the client and is -separated from the reserve, relay_reserve() doesn't protect the buffer -at all - it's up to the client to provide the appropriate -synchronization when using relay_reserve(). - -Closing a channel ------------------ - -The client calls relay_close() when it's finished using the channel. -The channel and its associated buffers are destroyed when there are no -longer any references to any of the channel buffers. relay_flush() -forces a sub-buffer switch on all the channel buffers, and can be used -to finalize and process the last sub-buffers before the channel is -closed. - -Creating non-relay files ------------------------- - -relay_open() automatically creates files in the relayfs filesystem to -represent the per-cpu kernel buffers; it's often useful for -applications to be able to create their own files alongside the relay -files in the relayfs filesystem as well e.g. 'control' files much like -those created in /proc or debugfs for similar purposes, used to -communicate control information between the kernel and user sides of a -relayfs application. For this purpose the relayfs_create_file() and -relayfs_remove_file() API functions exist. For relayfs_create_file(), -the caller passes in a set of user-defined file operations to be used -for the file and an optional void * to a user-specified data item, -which will be accessible via inode->u.generic_ip (see the relay-apps -tarball for examples). The file_operations are a required parameter -to relayfs_create_file() and thus the semantics of these files are -completely defined by the caller. - -See the relay-apps tarball at http://relayfs.sourceforge.net for -examples of how these non-relay files are meant to be used. - -Creating relay files in other filesystems ------------------------------------------ - -By default of course, relay_open() creates relay files in the relayfs -filesystem. Because relay_file_operations is exported, however, it's -also possible to create and use relay files in other pseudo-filesytems -such as debugfs. - -For this purpose, two callback functions are provided, -create_buf_file() and remove_buf_file(). create_buf_file() is called -once for each per-cpu buffer from relay_open() to allow the client to -create a file to be used to represent the corresponding buffer; if -this callback is not defined, the default implementation will create -and return a file in the relayfs filesystem to represent the buffer. -The callback should return the dentry of the file created to represent -the relay buffer. Note that the parent directory passed to -relay_open() (and passed along to the callback), if specified, must -exist in the same filesystem the new relay file is created in. If -create_buf_file() is defined, remove_buf_file() must also be defined; -it's responsible for deleting the file(s) created in create_buf_file() -and is called during relay_close(). - -The create_buf_file() implementation can also be defined in such a way -as to allow the creation of a single 'global' buffer instead of the -default per-cpu set. This can be useful for applications interested -mainly in seeing the relative ordering of system-wide events without -the need to bother with saving explicit timestamps for the purpose of -merging/sorting per-cpu files in a postprocessing step. - -To have relay_open() create a global buffer, the create_buf_file() -implementation should set the value of the is_global outparam to a -non-zero value in addition to creating the file that will be used to -represent the single buffer. In the case of a global buffer, -create_buf_file() and remove_buf_file() will be called only once. The -normal channel-writing functions e.g. relay_write() can still be used -- writes from any cpu will transparently end up in the global buffer - -but since it is a global buffer, callers should make sure they use the -proper locking for such a buffer, either by wrapping writes in a -spinlock, or by copying a write function from relayfs_fs.h and -creating a local version that internally does the proper locking. - -See the 'exported-relayfile' examples in the relay-apps tarball for -examples of creating and using relay files in debugfs. - -Misc ----- - -Some applications may want to keep a channel around and re-use it -rather than open and close a new channel for each use. relay_reset() -can be used for this purpose - it resets a channel to its initial -state without reallocating channel buffer memory or destroying -existing mappings. It should however only be called when it's safe to -do so i.e. when the channel isn't currently being written to. - -Finally, there are a couple of utility callbacks that can be used for -different purposes. buf_mapped() is called whenever a channel buffer -is mmapped from user space and buf_unmapped() is called when it's -unmapped. The client can use this notification to trigger actions -within the kernel application, such as enabling/disabling logging to -the channel. - - -Resources -========= - -For news, example code, mailing list, etc. see the relayfs homepage: - - http://relayfs.sourceforge.net - - -Credits -======= - -The ideas and specs for relayfs came about as a result of discussions -on tracing involving the following: - -Michel Dagenais -Richard Moore -Bob Wisniewski -Karim Yaghmour -Tom Zanussi - -Also thanks to Hubertus Franke for a lot of useful suggestions and bug -reports. -- cgit v1.2.2 From 45f17e0c2ae05c133a348452690de0e5fa863293 Mon Sep 17 00:00:00 2001 From: Masoud Asgharifard Sharbiani Date: Sun, 27 Aug 2006 01:23:48 -0700 Subject: [PATCH] eventpoll.c compile fix Fix two compile failures in eventpoll.c code which would happen if DEBUG_EPOLL is bigger than zero. Signed-off-by: Masoud Sharbiani Cc: Davide Libenzi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 19ffb043abbc..3a3567433b92 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1168,7 +1168,7 @@ static int ep_unlink(struct eventpoll *ep, struct epitem *epi) eexit_1: DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_unlink(%p, %p) = %d\n", - current, ep, epi->file, error)); + current, ep, epi->ffd.file, error)); return error; } @@ -1236,7 +1236,7 @@ static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *k struct eventpoll *ep = epi->ep; DNPRINTK(3, (KERN_INFO "[%p] eventpoll: poll_callback(%p) epi=%p ep=%p\n", - current, epi->file, epi, ep)); + current, epi->ffd.file, epi, ep)); write_lock_irqsave(&ep->lock, flags); -- cgit v1.2.2 From 84692195969b83f0ba57dc33ecf73e6c124dd186 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sun, 27 Aug 2006 01:23:49 -0700 Subject: [PATCH] md: avoid backward event updates in md superblock when degraded. If we - shut down a clean array, - restart with one (or more) drive(s) missing - make some changes - pause, so that they array gets marked 'clean', the event count on the superblock of included drives will be the same as that of the removed drives. So adding the removed drive back in will cause it to be included with no resync. To avoid this, we only update the eventcount backwards when the array is not degraded. In this case there can (should) be no non-connected drives that we can get confused with, and this is the particular case where updating-backwards is valuable. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index b6d16022a53e..8dbab2ef3885 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1597,6 +1597,19 @@ void md_update_sb(mddev_t * mddev) repeat: spin_lock_irq(&mddev->write_lock); + + if (mddev->degraded && mddev->sb_dirty == 3) + /* If the array is degraded, then skipping spares is both + * dangerous and fairly pointless. + * Dangerous because a device that was removed from the array + * might have a event_count that still looks up-to-date, + * so it can be re-added without a resync. + * Pointless because if there are any spares to skip, + * then a recovery will happen and soon that array won't + * be degraded any more and the spare can go back to sleep then. + */ + mddev->sb_dirty = 1; + sync_req = mddev->in_sync; mddev->utime = get_seconds(); if (mddev->sb_dirty == 3) -- cgit v1.2.2 From 6394cca54894f6a9bcf927ab78d28985944298ff Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sun, 27 Aug 2006 01:23:50 -0700 Subject: [PATCH] md: fix recent breakage of md/raid1 array checking A recent patch broke the ability to do a user-request check of a raid1. This patch fixes the breakage and also moves a comment that was dislocated by the same patch. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/raid1.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 1efe22a2d041..87bfe9e7d8ca 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1625,15 +1625,16 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i return 0; } - /* before building a request, check if we can skip these blocks.. - * This call the bitmap_start_sync doesn't actually record anything - */ if (mddev->bitmap == NULL && mddev->recovery_cp == MaxSector && + !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) && conf->fullsync == 0) { *skipped = 1; return max_sector - sector_nr; } + /* before building a request, check if we can skip these blocks.. + * This call the bitmap_start_sync doesn't actually record anything + */ if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) && !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { /* We can skip this block, and probably several more */ -- cgit v1.2.2 From 4c4d50f7b39cc58f1064b93a61ad617451ae41df Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Sun, 27 Aug 2006 01:23:51 -0700 Subject: [PATCH] cpuset: top_cpuset tracks hotplug changes to cpu_online_map Change the list of cpus allowed to tasks in the top (root) cpuset to dynamically track what cpus are online, using a CPU hotplug notifier. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support CPU hotplug, then these tasks cannot make use of CPUs that are added after system boot, because the CPUs are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'cpus' file in the top (root) cpuset, making it read only, and making it automatically track the value of cpu_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged CPUs allowed by their cpuset. Thanks to Anton Blanchard and Nathan Lynch for reporting this problem, driving the fix, and earlier versions of this patch. Signed-off-by: Paul Jackson Cc: Nathan Lynch Cc: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cpusets.txt | 6 ++++++ kernel/cpuset.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index 159e2a0c3e80..76b44290c154 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -217,6 +217,12 @@ exclusive cpuset. Also, the use of a Linux virtual file system (vfs) to represent the cpuset hierarchy provides for a familiar permission and name space for cpusets, with a minimum of additional kernel code. +The cpus file in the root (top_cpuset) cpuset is read-only. +It automatically tracks the value of cpu_online_map, using a CPU +hotplug notifier. If and when memory nodes can be hotplugged, +we expect to make the mems file in the root cpuset read-only +as well, and have it track the value of node_online_map. + 1.4 What are exclusive cpusets ? -------------------------------- diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 1a649f2bb9bb..f1dda98bdffe 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -816,6 +816,10 @@ static int update_cpumask(struct cpuset *cs, char *buf) struct cpuset trialcs; int retval, cpus_unchanged; + /* top_cpuset.cpus_allowed tracks cpu_online_map; it's read-only */ + if (cs == &top_cpuset) + return -EACCES; + trialcs = *cs; retval = cpulist_parse(buf, trialcs.cpus_allowed); if (retval < 0) @@ -2033,6 +2037,33 @@ out: return err; } +/* + * The top_cpuset tracks what CPUs and Memory Nodes are online, + * period. This is necessary in order to make cpusets transparent + * (of no affect) on systems that are actively using CPU hotplug + * but making no active use of cpusets. + * + * This handles CPU hotplug (cpuhp) events. If someday Memory + * Nodes can be hotplugged (dynamically changing node_online_map) + * then we should handle that too, perhaps in a similar way. + */ + +#ifdef CONFIG_HOTPLUG_CPU +static int cpuset_handle_cpuhp(struct notifier_block *nb, + unsigned long phase, void *cpu) +{ + mutex_lock(&manage_mutex); + mutex_lock(&callback_mutex); + + top_cpuset.cpus_allowed = cpu_online_map; + + mutex_unlock(&callback_mutex); + mutex_unlock(&manage_mutex); + + return 0; +} +#endif + /** * cpuset_init_smp - initialize cpus_allowed * @@ -2043,6 +2074,8 @@ void __init cpuset_init_smp(void) { top_cpuset.cpus_allowed = cpu_online_map; top_cpuset.mems_allowed = node_online_map; + + hotcpu_notifier(cpuset_handle_cpuhp, 0); } /** -- cgit v1.2.2 From ea817398e68dfa25612229fda7fc74580cf915fb Mon Sep 17 00:00:00 2001 From: Badari Pulavarty Date: Sun, 27 Aug 2006 01:23:52 -0700 Subject: [PATCH] Manage jbd allocations from its own slabs JBD currently allocates commit and frozen buffers from slabs. With CONFIG_SLAB_DEBUG, its possible for an allocation to cross the page boundary causing IO problems. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=200127 So, instead of allocating these from regular slabs - manage allocation from its own slabs and disable slab debug for these slabs. [akpm@osdl.org: cleanups] Signed-off-by: Badari Pulavarty Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/jbd/commit.c | 6 ++-- fs/jbd/journal.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++---- fs/jbd/transaction.c | 9 ++--- include/linux/jbd.h | 3 ++ 4 files changed, 97 insertions(+), 13 deletions(-) diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index 0971814c38b8..42da60784311 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -261,7 +261,7 @@ void journal_commit_transaction(journal_t *journal) struct buffer_head *bh = jh2bh(jh); jbd_lock_bh_state(bh); - kfree(jh->b_committed_data); + jbd_slab_free(jh->b_committed_data, bh->b_size); jh->b_committed_data = NULL; jbd_unlock_bh_state(bh); } @@ -745,14 +745,14 @@ restart_loop: * Otherwise, we can just throw away the frozen data now. */ if (jh->b_committed_data) { - kfree(jh->b_committed_data); + jbd_slab_free(jh->b_committed_data, bh->b_size); jh->b_committed_data = NULL; if (jh->b_frozen_data) { jh->b_committed_data = jh->b_frozen_data; jh->b_frozen_data = NULL; } } else if (jh->b_frozen_data) { - kfree(jh->b_frozen_data); + jbd_slab_free(jh->b_frozen_data, bh->b_size); jh->b_frozen_data = NULL; } diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 8c9b28dff119..f66724ce443a 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -84,6 +84,7 @@ EXPORT_SYMBOL(journal_force_commit); static int journal_convert_superblock_v1(journal_t *, journal_superblock_t *); static void __journal_abort_soft (journal_t *journal, int errno); +static int journal_create_jbd_slab(size_t slab_size); /* * Helper function used to manage commit timeouts @@ -328,10 +329,10 @@ repeat: char *tmp; jbd_unlock_bh_state(bh_in); - tmp = jbd_rep_kmalloc(bh_in->b_size, GFP_NOFS); + tmp = jbd_slab_alloc(bh_in->b_size, GFP_NOFS); jbd_lock_bh_state(bh_in); if (jh_in->b_frozen_data) { - kfree(tmp); + jbd_slab_free(tmp, bh_in->b_size); goto repeat; } @@ -1069,17 +1070,17 @@ static int load_superblock(journal_t *journal) int journal_load(journal_t *journal) { int err; + journal_superblock_t *sb; err = load_superblock(journal); if (err) return err; + sb = journal->j_superblock; /* If this is a V2 superblock, then we have to check the * features flags on it. */ if (journal->j_format_version >= 2) { - journal_superblock_t *sb = journal->j_superblock; - if ((sb->s_feature_ro_compat & ~cpu_to_be32(JFS_KNOWN_ROCOMPAT_FEATURES)) || (sb->s_feature_incompat & @@ -1090,6 +1091,13 @@ int journal_load(journal_t *journal) } } + /* + * Create a slab for this blocksize + */ + err = journal_create_jbd_slab(cpu_to_be32(sb->s_blocksize)); + if (err) + return err; + /* Let the recovery code check whether it needs to recover any * data from the journal. */ if (journal_recover(journal)) @@ -1611,6 +1619,77 @@ void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry) return kmalloc(size, flags | (retry ? __GFP_NOFAIL : 0)); } +/* + * jbd slab management: create 1k, 2k, 4k, 8k slabs as needed + * and allocate frozen and commit buffers from these slabs. + * + * Reason for doing this is to avoid, SLAB_DEBUG - since it could + * cause bh to cross page boundary. + */ + +#define JBD_MAX_SLABS 5 +#define JBD_SLAB_INDEX(size) (size >> 11) + +static kmem_cache_t *jbd_slab[JBD_MAX_SLABS]; +static const char *jbd_slab_names[JBD_MAX_SLABS] = { + "jbd_1k", "jbd_2k", "jbd_4k", NULL, "jbd_8k" +}; + +static void journal_destroy_jbd_slabs(void) +{ + int i; + + for (i = 0; i < JBD_MAX_SLABS; i++) { + if (jbd_slab[i]) + kmem_cache_destroy(jbd_slab[i]); + jbd_slab[i] = NULL; + } +} + +static int journal_create_jbd_slab(size_t slab_size) +{ + int i = JBD_SLAB_INDEX(slab_size); + + BUG_ON(i >= JBD_MAX_SLABS); + + /* + * Check if we already have a slab created for this size + */ + if (jbd_slab[i]) + return 0; + + /* + * Create a slab and force alignment to be same as slabsize - + * this will make sure that allocations won't cross the page + * boundary. + */ + jbd_slab[i] = kmem_cache_create(jbd_slab_names[i], + slab_size, slab_size, 0, NULL, NULL); + if (!jbd_slab[i]) { + printk(KERN_EMERG "JBD: no memory for jbd_slab cache\n"); + return -ENOMEM; + } + return 0; +} + +void * jbd_slab_alloc(size_t size, gfp_t flags) +{ + int idx; + + idx = JBD_SLAB_INDEX(size); + BUG_ON(jbd_slab[idx] == NULL); + return kmem_cache_alloc(jbd_slab[idx], flags | __GFP_NOFAIL); +} + +void jbd_slab_free(void *ptr, size_t size) +{ + int idx; + + idx = JBD_SLAB_INDEX(size); + BUG_ON(jbd_slab[idx] == NULL); + kmem_cache_free(jbd_slab[idx], ptr); +} + /* * Journal_head storage management */ @@ -1799,13 +1878,13 @@ static void __journal_remove_journal_head(struct buffer_head *bh) printk(KERN_WARNING "%s: freeing " "b_frozen_data\n", __FUNCTION__); - kfree(jh->b_frozen_data); + jbd_slab_free(jh->b_frozen_data, bh->b_size); } if (jh->b_committed_data) { printk(KERN_WARNING "%s: freeing " "b_committed_data\n", __FUNCTION__); - kfree(jh->b_committed_data); + jbd_slab_free(jh->b_committed_data, bh->b_size); } bh->b_private = NULL; jh->b_bh = NULL; /* debug, really */ @@ -1961,6 +2040,7 @@ static void journal_destroy_caches(void) journal_destroy_revoke_caches(); journal_destroy_journal_head_cache(); journal_destroy_handle_cache(); + journal_destroy_jbd_slabs(); } static int __init journal_init(void) diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 508b2ea91f43..de2e4cbbf79a 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -666,8 +666,9 @@ repeat: if (!frozen_buffer) { JBUFFER_TRACE(jh, "allocate memory for buffer"); jbd_unlock_bh_state(bh); - frozen_buffer = jbd_kmalloc(jh2bh(jh)->b_size, - GFP_NOFS); + frozen_buffer = + jbd_slab_alloc(jh2bh(jh)->b_size, + GFP_NOFS); if (!frozen_buffer) { printk(KERN_EMERG "%s: OOM for frozen_buffer\n", @@ -879,7 +880,7 @@ int journal_get_undo_access(handle_t *handle, struct buffer_head *bh) repeat: if (!jh->b_committed_data) { - committed_data = jbd_kmalloc(jh2bh(jh)->b_size, GFP_NOFS); + committed_data = jbd_slab_alloc(jh2bh(jh)->b_size, GFP_NOFS); if (!committed_data) { printk(KERN_EMERG "%s: No memory for committed data\n", __FUNCTION__); @@ -906,7 +907,7 @@ repeat: out: journal_put_journal_head(jh); if (unlikely(committed_data)) - kfree(committed_data); + jbd_slab_free(committed_data, bh->b_size); return err; } diff --git a/include/linux/jbd.h b/include/linux/jbd.h index 20eb34403d0c..a04c154c5207 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -72,6 +72,9 @@ extern int journal_enable_debug; #endif extern void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry); +extern void * jbd_slab_alloc(size_t size, gfp_t flags); +extern void jbd_slab_free(void *ptr, size_t size); + #define jbd_kmalloc(size, flags) \ __jbd_kmalloc(__FUNCTION__, (size), (flags), journal_oom_retry) #define jbd_rep_kmalloc(size, flags) \ -- cgit v1.2.2 From 36920e069a87c6fccffbc0ec5e74985d94d3bcc4 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Sun, 27 Aug 2006 01:23:52 -0700 Subject: [PATCH] register_one_node() compile fix register_one_node()'s should be defined under CONFIG_NUMA=n. fixes following bug. CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 mm/built-in.o: In function `add_memory': undefined reference to `register_one_node' Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Yasunori Goto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/node.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/include/linux/node.h b/include/linux/node.h index 81dcec84cd8f..bc001bc225c3 100644 --- a/include/linux/node.h +++ b/include/linux/node.h @@ -30,12 +30,20 @@ extern struct node node_devices[]; extern int register_node(struct node *, int, struct node *); extern void unregister_node(struct node *node); +#ifdef CONFIG_NUMA extern int register_one_node(int nid); extern void unregister_one_node(int nid); -#ifdef CONFIG_NUMA extern int register_cpu_under_node(unsigned int cpu, unsigned int nid); extern int unregister_cpu_under_node(unsigned int cpu, unsigned int nid); #else +static inline int register_one_node(int nid) +{ + return 0; +} +static inline int unregister_one_node(int nid) +{ + return 0; +} static inline int register_cpu_under_node(unsigned int cpu, unsigned int nid) { return 0; -- cgit v1.2.2 From 0d673a5a4775d3dc565b6668ed75fd2db2ede624 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Sun, 27 Aug 2006 01:23:54 -0700 Subject: [PATCH] cpuset: oom panic fix cpuset_excl_nodes_overlap always returns 0 if current is exiting. This caused customer's systems to panic in the OOM killer when processes were having trouble getting memory for the final put_user in mm_release. Even though there were lots of processes to kill. Change to returning 1 in this case. This achieves parity with !CONFIG_CPUSETS case, and was observed to fix the problem. Signed-off-by: Nick Piggin Acked-by: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cpuset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index f1dda98bdffe..4ea6f0dc2fc5 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -2420,7 +2420,7 @@ EXPORT_SYMBOL_GPL(cpuset_mem_spread_node); int cpuset_excl_nodes_overlap(const struct task_struct *p) { const struct cpuset *cs1, *cs2; /* my and p's cpuset ancestors */ - int overlap = 0; /* do cpusets overlap? */ + int overlap = 1; /* do cpusets overlap? */ task_lock(current); if (current->flags & PF_EXITING) { -- cgit v1.2.2 From 4e54bdaa9cf55d7e74409ea288b705c144b2627e Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Sun, 27 Aug 2006 01:23:55 -0700 Subject: [PATCH] CONFIG_ACPI_SRAT NUMA build fix In file included from include/asm/mmzone.h:18, from include/linux/mmzone.h:439, include/asm/srat.h:31:2: error: #error CONFIG_ACPI_SRAT not defined, and srat.h header has been included make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1 This can happen with CONFIG_NUMA && !CONFIG_ACPI && !CONFIG_X86_NUMAQ Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/mmzone.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-i386/mmzone.h b/include/asm-i386/mmzone.h index e33e9f9e4c66..22cb07cc8f32 100644 --- a/include/asm-i386/mmzone.h +++ b/include/asm-i386/mmzone.h @@ -14,7 +14,7 @@ extern struct pglist_data *node_data[]; #ifdef CONFIG_X86_NUMAQ #include -#else /* summit or generic arch */ +#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */ #include #endif -- cgit v1.2.2 From 36e8e5783297fbb83bdebe7e245ef659958f23cb Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 27 Aug 2006 01:23:56 -0700 Subject: [PATCH] lockdep: annotate idescsi_pc_intr() idescsi_pc_intr() uses local_irq_enable() in IRQ context: annotate it. (this has no effect on kernels with lockdep disabled. On kernels with lockdep enabled this means that we wont actually disable interrupts, and the warning message will go away as well.) Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/ide-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index f7b5d7372d26..94d1de55607f 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -517,7 +517,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) /* No more interrupts */ if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred); - local_irq_enable(); + local_irq_enable_in_hardirq(); if (status.b.check) rq->errors++; idescsi_end_request (drive, 1, 0); -- cgit v1.2.2 From 4df46240a1312161e3c794f6ace50ef7eb5ff3d7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 27 Aug 2006 01:23:56 -0700 Subject: [PATCH] lockdep: annotate reiserfs reiserfs seems to have another locking level layer for the i_mutex due to the xattrs-are-a-directory thing. Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/reiserfs/xattr.c | 2 +- include/linux/fs.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 39fedaa88a0c..d935fb9394e3 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -424,7 +424,7 @@ int xattr_readdir(struct file *file, filldir_t filler, void *buf) int res = -ENOTDIR; if (!file->f_op || !file->f_op->readdir) goto out; - mutex_lock(&inode->i_mutex); + mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR); // down(&inode->i_zombie); res = -ENOENT; if (!IS_DEADDIR(inode)) { diff --git a/include/linux/fs.h b/include/linux/fs.h index 25610205c90d..555bc195c420 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -570,13 +570,14 @@ struct inode { * 3: quota file * * The locking order between these classes is - * parent -> child -> normal -> quota + * parent -> child -> normal -> xattr -> quota */ enum inode_i_mutex_lock_class { I_MUTEX_NORMAL, I_MUTEX_PARENT, I_MUTEX_CHILD, + I_MUTEX_XATTR, I_MUTEX_QUOTA }; -- cgit v1.2.2 From 513627d7fec6fcb7b3d56ce355cb4d192c76b530 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 27 Aug 2006 01:23:57 -0700 Subject: [PATCH] fix up lockdep trace in fs/exec.c This fixes the locking error noticed by lockdep: ============================================= [ INFO: possible recursive locking detected ] --------------------------------------------- init/1 is trying to acquire lock: (&sighand->siglock){....}, at: [] flush_old_exec+0x3ae/0x859 but task is already holding lock: (&sighand->siglock){....}, at: [] flush_old_exec+0x39e/0x859 other info that might help us debug this: 2 locks held by init/1: #0: (tasklist_lock){..--}, at: [] flush_old_exec+0x38e/0x859 #1: (&sighand->siglock){....}, at: [] flush_old_exec+0x39e/0x859 stack backtrace: [] show_trace_log_lvl+0x54/0xfd [] show_trace+0xd/0x10 [] dump_stack+0x19/0x1b [] __lock_acquire+0x773/0x997 [] lock_acquire+0x4b/0x6c [] _spin_lock+0x19/0x28 [] flush_old_exec+0x3ae/0x859 [] load_elf_binary+0x4aa/0x1628 [] search_binary_handler+0xa7/0x24e [] do_execve+0x15b/0x1f9 [] sys_execve+0x29/0x4d [] syscall_call+0x7/0xb Signed-off-by: Arjan van de Ven Signed-off-by: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/exec.c b/fs/exec.c index f7aabfeca033..54135df2a966 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -751,7 +751,7 @@ no_thread_group: write_lock_irq(&tasklist_lock); spin_lock(&oldsighand->siglock); - spin_lock(&newsighand->siglock); + spin_lock_nested(&newsighand->siglock, SINGLE_DEPTH_NESTING); rcu_assign_pointer(current->sighand, newsighand); recalc_sigpending(); -- cgit v1.2.2 From f5ef68da5fda5e095b585ea5ecdd42af3c8695f7 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 27 Aug 2006 01:23:58 -0700 Subject: [PATCH] /proc/meminfo: don't put spaces in names None of the other /proc/meminfo lines have a space in the identifier. This post-2.6.17 addition has the potential to break existing parsers, so use an underscore instead (like Committed_AS). Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/node.c | 2 +- fs/proc/proc_misc.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/node.c b/drivers/base/node.c index d7de1753e094..e9b0957f15d1 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -64,7 +64,7 @@ static ssize_t node_read_meminfo(struct sys_device * dev, char * buf) "Node %d Mapped: %8lu kB\n" "Node %d AnonPages: %8lu kB\n" "Node %d PageTables: %8lu kB\n" - "Node %d NFS Unstable: %8lu kB\n" + "Node %d NFS_Unstable: %8lu kB\n" "Node %d Bounce: %8lu kB\n" "Node %d Slab: %8lu kB\n", nid, K(i.totalram), diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 9f2cfc30f9cf..942156225447 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -169,7 +169,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off, "Mapped: %8lu kB\n" "Slab: %8lu kB\n" "PageTables: %8lu kB\n" - "NFS Unstable: %8lu kB\n" + "NFS_Unstable: %8lu kB\n" "Bounce: %8lu kB\n" "CommitLimit: %8lu kB\n" "Committed_AS: %8lu kB\n" -- cgit v1.2.2 From 38e716aa016dfd8466c11500c56ab7773344fdf7 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Sun, 27 Aug 2006 01:24:00 -0700 Subject: [PATCH] x86: NUMAQ Kconfig fix When we select NUMA with i386, the system is only X86_NUMAQ or using ACPI. Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index f71fb4a029cb..b2751eadbc56 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -142,6 +142,7 @@ config X86_SUMMIT In particular, it is needed for the x440. If you don't have one of these computers, you should say N here. + If you want to build a NUMA kernel, you must select ACPI. config X86_BIGSMP bool "Support for other sub-arch SMP systems with more than 8 CPUs" @@ -169,6 +170,7 @@ config X86_GENERICARCH help This option compiles in the Summit, bigsmp, ES7000, default subarchitectures. It is intended for a generic binary kernel. + If you want a NUMA kernel, select ACPI. We need SRAT for NUMA. config X86_ES7000 bool "Support for Unisys ES7000 IA32 series" @@ -542,7 +544,7 @@ config X86_PAE # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support" - depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI)) + depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT) -- cgit v1.2.2 From 9c275a8391d96b49fa135d1e4073d4798b7c6445 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 27 Aug 2006 01:24:00 -0700 Subject: [PATCH] cdrom/gdsc: fix printk format warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix printk format warning: drivers/cdrom/gscd.c:269: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ Signed-off-by: Randy Dunlap Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/cdrom/gscd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cdrom/gscd.c b/drivers/cdrom/gscd.c index b6ee50a2916d..fa7082489765 100644 --- a/drivers/cdrom/gscd.c +++ b/drivers/cdrom/gscd.c @@ -266,7 +266,7 @@ repeat: goto out; if (req->cmd != READ) { - printk("GSCD: bad cmd %lu\n", rq_data_dir(req)); + printk("GSCD: bad cmd %u\n", rq_data_dir(req)); end_request(req, 0); goto repeat; } -- cgit v1.2.2 From af9b897ee639d96b2bd29b65b50cd0a1f2b6d6c9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 27 Aug 2006 01:24:01 -0700 Subject: [PATCH] tty layer comment the locking assumptions and functions somewhat Doesn't fix them but does show up some interesting areas that need review and fixing. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 718 +++++++++++++++++++++++++++++++++++++++++++---- drivers/char/tty_ioctl.c | 59 +++- 2 files changed, 715 insertions(+), 62 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index d6e4eaa48538..2cef982585f0 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -153,6 +153,15 @@ int tty_ioctl(struct inode * inode, struct file * file, static int tty_fasync(int fd, struct file * filp, int on); static void release_mem(struct tty_struct *tty, int idx); +/** + * alloc_tty_struct - allocate a tty object + * + * Return a new empty tty structure. The data fields have not + * been initialized in any way but has been zeroed + * + * Locking: none + * FIXME: use kzalloc + */ static struct tty_struct *alloc_tty_struct(void) { @@ -166,6 +175,15 @@ static struct tty_struct *alloc_tty_struct(void) static void tty_buffer_free_all(struct tty_struct *); +/** + * free_tty_struct - free a disused tty + * @tty: tty struct to free + * + * Free the write buffers, tty queue and tty memory itself. + * + * Locking: none. Must be called after tty is definitely unused + */ + static inline void free_tty_struct(struct tty_struct *tty) { kfree(tty->write_buf); @@ -175,6 +193,17 @@ static inline void free_tty_struct(struct tty_struct *tty) #define TTY_NUMBER(tty) ((tty)->index + (tty)->driver->name_base) +/** + * tty_name - return tty naming + * @tty: tty structure + * @buf: buffer for output + * + * Convert a tty structure into a name. The name reflects the kernel + * naming policy and if udev is in use may not reflect user space + * + * Locking: none + */ + char *tty_name(struct tty_struct *tty, char *buf) { if (!tty) /* Hmm. NULL pointer. That's fun. */ @@ -235,6 +264,17 @@ static int check_tty_count(struct tty_struct *tty, const char *routine) * Tty buffer allocation management */ + +/** + * tty_buffer_free_all - free buffers used by a tty + * @tty: tty to free from + * + * Remove all the buffers pending on a tty whether queued with data + * or in the free ring. Must be called when the tty is no longer in use + * + * Locking: none + */ + static void tty_buffer_free_all(struct tty_struct *tty) { struct tty_buffer *thead; @@ -347,6 +387,18 @@ int tty_buffer_request_room(struct tty_struct *tty, size_t size) } EXPORT_SYMBOL_GPL(tty_buffer_request_room); +/** + * tty_insert_flip_string - Add characters to the tty buffer + * @tty: tty structure + * @chars: characters + * @size: size + * + * Queue a series of bytes to the tty buffering. All the characters + * passed are marked as without error. Returns the number added. + * + * Locking: Called functions may take tty->buf.lock + */ + int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size) { @@ -370,6 +422,20 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, } EXPORT_SYMBOL(tty_insert_flip_string); +/** + * tty_insert_flip_string_flags - Add characters to the tty buffer + * @tty: tty structure + * @chars: characters + * @flags: flag bytes + * @size: size + * + * Queue a series of bytes to the tty buffering. For each character + * the flags array indicates the status of the character. Returns the + * number added. + * + * Locking: Called functions may take tty->buf.lock + */ + int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size) { @@ -394,6 +460,17 @@ int tty_insert_flip_string_flags(struct tty_struct *tty, } EXPORT_SYMBOL(tty_insert_flip_string_flags); +/** + * tty_schedule_flip - push characters to ldisc + * @tty: tty to push from + * + * Takes any pending buffers and transfers their ownership to the + * ldisc side of the queue. It then schedules those characters for + * processing by the line discipline. + * + * Locking: Takes tty->buf.lock + */ + void tty_schedule_flip(struct tty_struct *tty) { unsigned long flags; @@ -405,12 +482,19 @@ void tty_schedule_flip(struct tty_struct *tty) } EXPORT_SYMBOL(tty_schedule_flip); -/* +/** + * tty_prepare_flip_string - make room for characters + * @tty: tty + * @chars: return pointer for character write area + * @size: desired size + * * Prepare a block of space in the buffer for data. Returns the length * available and buffer pointer to the space which is now allocated and * accounted for as ready for normal characters. This is used for drivers * that need their own block copy routines into the buffer. There is no * guarantee the buffer is a DMA target! + * + * Locking: May call functions taking tty->buf.lock */ int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size) @@ -427,12 +511,20 @@ int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_ EXPORT_SYMBOL_GPL(tty_prepare_flip_string); -/* +/** + * tty_prepare_flip_string_flags - make room for characters + * @tty: tty + * @chars: return pointer for character write area + * @flags: return pointer for status flag write area + * @size: desired size + * * Prepare a block of space in the buffer for data. Returns the length * available and buffer pointer to the space which is now allocated and * accounted for as ready for characters. This is used for drivers * that need their own block copy routines into the buffer. There is no * guarantee the buffer is a DMA target! + * + * Locking: May call functions taking tty->buf.lock */ int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size) @@ -451,10 +543,16 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags); -/* +/** + * tty_set_termios_ldisc - set ldisc field + * @tty: tty structure + * @num: line discipline number + * * This is probably overkill for real world processors but * they are not on hot paths so a little discipline won't do * any harm. + * + * Locking: takes termios_sem */ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) @@ -474,6 +572,19 @@ static DEFINE_SPINLOCK(tty_ldisc_lock); static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait); static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /* line disc dispatch table */ +/** + * tty_register_ldisc - install a line discipline + * @disc: ldisc number + * @new_ldisc: pointer to the ldisc object + * + * Installs a new line discipline into the kernel. The discipline + * is set up as unreferenced and then made available to the kernel + * from this point onwards. + * + * Locking: + * takes tty_ldisc_lock to guard against ldisc races + */ + int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc) { unsigned long flags; @@ -493,6 +604,18 @@ int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc) } EXPORT_SYMBOL(tty_register_ldisc); +/** + * tty_unregister_ldisc - unload a line discipline + * @disc: ldisc number + * @new_ldisc: pointer to the ldisc object + * + * Remove a line discipline from the kernel providing it is not + * currently in use. + * + * Locking: + * takes tty_ldisc_lock to guard against ldisc races + */ + int tty_unregister_ldisc(int disc) { unsigned long flags; @@ -512,6 +635,19 @@ int tty_unregister_ldisc(int disc) } EXPORT_SYMBOL(tty_unregister_ldisc); +/** + * tty_ldisc_get - take a reference to an ldisc + * @disc: ldisc number + * + * Takes a reference to a line discipline. Deals with refcounts and + * module locking counts. Returns NULL if the discipline is not available. + * Returns a pointer to the discipline and bumps the ref count if it is + * available + * + * Locking: + * takes tty_ldisc_lock to guard against ldisc races + */ + struct tty_ldisc *tty_ldisc_get(int disc) { unsigned long flags; @@ -540,6 +676,17 @@ struct tty_ldisc *tty_ldisc_get(int disc) EXPORT_SYMBOL_GPL(tty_ldisc_get); +/** + * tty_ldisc_put - drop ldisc reference + * @disc: ldisc number + * + * Drop a reference to a line discipline. Manage refcounts and + * module usage counts + * + * Locking: + * takes tty_ldisc_lock to guard against ldisc races + */ + void tty_ldisc_put(int disc) { struct tty_ldisc *ld; @@ -557,6 +704,19 @@ void tty_ldisc_put(int disc) EXPORT_SYMBOL_GPL(tty_ldisc_put); +/** + * tty_ldisc_assign - set ldisc on a tty + * @tty: tty to assign + * @ld: line discipline + * + * Install an instance of a line discipline into a tty structure. The + * ldisc must have a reference count above zero to ensure it remains/ + * The tty instance refcount starts at zero. + * + * Locking: + * Caller must hold references + */ + static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld) { tty->ldisc = *ld; @@ -571,6 +731,8 @@ static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld) * the tty ldisc. Return 0 on failure or 1 on success. This is * used to implement both the waiting and non waiting versions * of tty_ldisc_ref + * + * Locking: takes tty_ldisc_lock */ static int tty_ldisc_try(struct tty_struct *tty) @@ -602,6 +764,8 @@ static int tty_ldisc_try(struct tty_struct *tty) * must also be careful not to hold other locks that will deadlock * against a discipline change, such as an existing ldisc reference * (which we check for) + * + * Locking: call functions take tty_ldisc_lock */ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) @@ -622,6 +786,8 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); * Dereference the line discipline for the terminal and take a * reference to it. If the line discipline is in flux then * return NULL. Can be called from IRQ and timer functions. + * + * Locking: called functions take tty_ldisc_lock */ struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) @@ -639,6 +805,8 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref); * * Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May * be called in IRQ context. + * + * Locking: takes tty_ldisc_lock */ void tty_ldisc_deref(struct tty_ldisc *ld) @@ -683,6 +851,9 @@ static void tty_ldisc_enable(struct tty_struct *tty) * * Set the discipline of a tty line. Must be called from a process * context. + * + * Locking: takes tty_ldisc_lock. + * called functions take termios_sem */ static int tty_set_ldisc(struct tty_struct *tty, int ldisc) @@ -846,9 +1017,17 @@ restart: return retval; } -/* - * This routine returns a tty driver structure, given a device number +/** + * get_tty_driver - find device of a tty + * @dev_t: device identifier + * @index: returns the index of the tty + * + * This routine returns a tty driver structure, given a device number + * and also passes back the index number. + * + * Locking: caller must hold tty_mutex */ + static struct tty_driver *get_tty_driver(dev_t device, int *index) { struct tty_driver *p; @@ -863,11 +1042,17 @@ static struct tty_driver *get_tty_driver(dev_t device, int *index) return NULL; } -/* - * If we try to write to, or set the state of, a terminal and we're - * not in the foreground, send a SIGTTOU. If the signal is blocked or - * ignored, go ahead and perform the operation. (POSIX 7.2) +/** + * tty_check_change - check for POSIX terminal changes + * @tty: tty to check + * + * If we try to write to, or set the state of, a terminal and we're + * not in the foreground, send a SIGTTOU. If the signal is blocked or + * ignored, go ahead and perform the operation. (POSIX 7.2) + * + * Locking: none */ + int tty_check_change(struct tty_struct * tty) { if (current->signal->tty != tty) @@ -1005,10 +1190,27 @@ void tty_ldisc_flush(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_ldisc_flush); -/* - * This can be called by the "eventd" kernel thread. That is process synchronous, - * but doesn't hold any locks, so we need to make sure we have the appropriate - * locks for what we're doing.. +/** + * do_tty_hangup - actual handler for hangup events + * @data: tty device + * + * This can be called by the "eventd" kernel thread. That is process + * synchronous but doesn't hold any locks, so we need to make sure we + * have the appropriate locks for what we're doing. + * + * The hangup event clears any pending redirections onto the hung up + * device. It ensures future writes will error and it does the needed + * line discipline hangup and signal delivery. The tty object itself + * remains intact. + * + * Locking: + * BKL + * redirect lock for undoing redirection + * file list lock for manipulating list of ttys + * tty_ldisc_lock from called functions + * termios_sem resetting termios data + * tasklist_lock to walk task list for hangup event + * */ static void do_tty_hangup(void *data) { @@ -1133,6 +1335,14 @@ static void do_tty_hangup(void *data) fput(f); } +/** + * tty_hangup - trigger a hangup event + * @tty: tty to hangup + * + * A carrier loss (virtual or otherwise) has occurred on this like + * schedule a hangup sequence to run after this event. + */ + void tty_hangup(struct tty_struct * tty) { #ifdef TTY_DEBUG_HANGUP @@ -1145,6 +1355,15 @@ void tty_hangup(struct tty_struct * tty) EXPORT_SYMBOL(tty_hangup); +/** + * tty_vhangup - process vhangup + * @tty: tty to hangup + * + * The user has asked via system call for the terminal to be hung up. + * We do this synchronously so that when the syscall returns the process + * is complete. That guarantee is neccessary for security reasons. + */ + void tty_vhangup(struct tty_struct * tty) { #ifdef TTY_DEBUG_HANGUP @@ -1156,6 +1375,14 @@ void tty_vhangup(struct tty_struct * tty) } EXPORT_SYMBOL(tty_vhangup); +/** + * tty_hung_up_p - was tty hung up + * @filp: file pointer of tty + * + * Return true if the tty has been subject to a vhangup or a carrier + * loss + */ + int tty_hung_up_p(struct file * filp) { return (filp->f_op == &hung_up_tty_fops); @@ -1163,19 +1390,28 @@ int tty_hung_up_p(struct file * filp) EXPORT_SYMBOL(tty_hung_up_p); -/* - * This function is typically called only by the session leader, when - * it wants to disassociate itself from its controlling tty. +/** + * disassociate_ctty - disconnect controlling tty + * @on_exit: true if exiting so need to "hang up" the session * - * It performs the following functions: + * This function is typically called only by the session leader, when + * it wants to disassociate itself from its controlling tty. + * + * It performs the following functions: * (1) Sends a SIGHUP and SIGCONT to the foreground process group * (2) Clears the tty from being controlling the session * (3) Clears the controlling tty for all processes in the * session group. * - * The argument on_exit is set to 1 if called when a process is - * exiting; it is 0 if called by the ioctl TIOCNOTTY. + * The argument on_exit is set to 1 if called when a process is + * exiting; it is 0 if called by the ioctl TIOCNOTTY. + * + * Locking: tty_mutex is taken to protect current->signal->tty + * BKL is taken for hysterical raisins + * Tasklist lock is taken (under tty_mutex) to walk process + * lists for the session. */ + void disassociate_ctty(int on_exit) { struct tty_struct *tty; @@ -1222,6 +1458,25 @@ void disassociate_ctty(int on_exit) unlock_kernel(); } + +/** + * stop_tty - propogate flow control + * @tty: tty to stop + * + * Perform flow control to the driver. For PTY/TTY pairs we + * must also propogate the TIOCKPKT status. May be called + * on an already stopped device and will not re-call the driver + * method. + * + * This functionality is used by both the line disciplines for + * halting incoming flow and by the driver. It may therefore be + * called from any context, may be under the tty atomic_write_lock + * but not always. + * + * Locking: + * Broken. Relies on BKL which is unsafe here. + */ + void stop_tty(struct tty_struct *tty) { if (tty->stopped) @@ -1238,6 +1493,19 @@ void stop_tty(struct tty_struct *tty) EXPORT_SYMBOL(stop_tty); +/** + * start_tty - propogate flow control + * @tty: tty to start + * + * Start a tty that has been stopped if at all possible. Perform + * any neccessary wakeups and propogate the TIOCPKT status. If this + * is the tty was previous stopped and is being started then the + * driver start method is invoked and the line discipline woken. + * + * Locking: + * Broken. Relies on BKL which is unsafe here. + */ + void start_tty(struct tty_struct *tty) { if (!tty->stopped || tty->flow_stopped) @@ -1258,6 +1526,23 @@ void start_tty(struct tty_struct *tty) EXPORT_SYMBOL(start_tty); +/** + * tty_read - read method for tty device files + * @file: pointer to tty file + * @buf: user buffer + * @count: size of user buffer + * @ppos: unused + * + * Perform the read system call function on this terminal device. Checks + * for hung up devices before calling the line discipline method. + * + * Locking: + * Locks the line discipline internally while needed + * For historical reasons the line discipline read method is + * invoked under the BKL. This will go away in time so do not rely on it + * in new code. Multiple read calls may be outstanding in parallel. + */ + static ssize_t tty_read(struct file * file, char __user * buf, size_t count, loff_t *ppos) { @@ -1302,6 +1587,7 @@ static inline ssize_t do_tty_write( ssize_t ret = 0, written = 0; unsigned int chunk; + /* FIXME: O_NDELAY ... */ if (mutex_lock_interruptible(&tty->atomic_write_lock)) { return -ERESTARTSYS; } @@ -1318,6 +1604,9 @@ static inline ssize_t do_tty_write( * layer has problems with bigger chunks. It will * claim to be able to handle more characters than * it actually does. + * + * FIXME: This can probably go away now except that 64K chunks + * are too likely to fail unless switched to vmalloc... */ chunk = 2048; if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags)) @@ -1375,6 +1664,24 @@ static inline ssize_t do_tty_write( } +/** + * tty_write - write method for tty device file + * @file: tty file pointer + * @buf: user data to write + * @count: bytes to write + * @ppos: unused + * + * Write data to a tty device via the line discipline. + * + * Locking: + * Locks the line discipline as required + * Writes to the tty driver are serialized by the atomic_write_lock + * and are then processed in chunks to the device. The line discipline + * write method will not be involked in parallel for each device + * The line discipline write method is called under the big + * kernel lock for historical reasons. New code should not rely on this. + */ + static ssize_t tty_write(struct file * file, const char __user * buf, size_t count, loff_t *ppos) { @@ -1422,7 +1729,18 @@ ssize_t redirected_tty_write(struct file * file, const char __user * buf, size_t static char ptychar[] = "pqrstuvwxyzabcde"; -static inline void pty_line_name(struct tty_driver *driver, int index, char *p) +/** + * pty_line_name - generate name for a pty + * @driver: the tty driver in use + * @index: the minor number + * @p: output buffer of at least 6 bytes + * + * Generate a name from a driver reference and write it to the output + * buffer. + * + * Locking: None + */ +static void pty_line_name(struct tty_driver *driver, int index, char *p) { int i = index + driver->name_base; /* ->name is initialized to "ttyp", but "tty" is expected */ @@ -1431,24 +1749,53 @@ static inline void pty_line_name(struct tty_driver *driver, int index, char *p) ptychar[i >> 4 & 0xf], i & 0xf); } -static inline void tty_line_name(struct tty_driver *driver, int index, char *p) +/** + * pty_line_name - generate name for a tty + * @driver: the tty driver in use + * @index: the minor number + * @p: output buffer of at least 7 bytes + * + * Generate a name from a driver reference and write it to the output + * buffer. + * + * Locking: None + */ +static void tty_line_name(struct tty_driver *driver, int index, char *p) { sprintf(p, "%s%d", driver->name, index + driver->name_base); } -/* +/** + * init_dev - initialise a tty device + * @driver: tty driver we are opening a device on + * @idx: device index + * @tty: returned tty structure + * + * Prepare a tty device. This may not be a "new" clean device but + * could also be an active device. The pty drivers require special + * handling because of this. + * + * Locking: + * The function is called under the tty_mutex, which + * protects us from the tty struct or driver itself going away. + * + * On exit the tty device has the line discipline attached and + * a reference count of 1. If a pair was created for pty/tty use + * and the other was a pty master then it too has a reference count of 1. + * * WSH 06/09/97: Rewritten to remove races and properly clean up after a * failed open. The new code protects the open with a mutex, so it's * really quite straightforward. The mutex locking can probably be * relaxed for the (most common) case of reopening a tty. */ + static int init_dev(struct tty_driver *driver, int idx, struct tty_struct **ret_tty) { struct tty_struct *tty, *o_tty; struct termios *tp, **tp_loc, *o_tp, **o_tp_loc; struct termios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc; - int retval=0; + int retval = 0; /* check whether we're reopening an existing tty */ if (driver->flags & TTY_DRIVER_DEVPTS_MEM) { @@ -1662,10 +2009,20 @@ release_mem_out: goto end_init; } -/* - * Releases memory associated with a tty structure, and clears out the - * driver table slots. +/** + * release_mem - release tty structure memory + * + * Releases memory associated with a tty structure, and clears out the + * driver table slots. This function is called when a device is no longer + * in use. It also gets called when setup of a device fails. + * + * Locking: + * tty_mutex - sometimes only + * takes the file list lock internally when working on the list + * of ttys that the driver keeps. + * FIXME: should we require tty_mutex is held here ?? */ + static void release_mem(struct tty_struct *tty, int idx) { struct tty_struct *o_tty; @@ -2006,18 +2363,27 @@ static void release_dev(struct file * filp) } -/* - * tty_open and tty_release keep up the tty count that contains the - * number of opens done on a tty. We cannot use the inode-count, as - * different inodes might point to the same tty. +/** + * tty_open - open a tty device + * @inode: inode of device file + * @filp: file pointer to tty * - * Open-counting is needed for pty masters, as well as for keeping - * track of serial lines: DTR is dropped when the last close happens. - * (This is not done solely through tty->count, now. - Ted 1/27/92) + * tty_open and tty_release keep up the tty count that contains the + * number of opens done on a tty. We cannot use the inode-count, as + * different inodes might point to the same tty. * - * The termios state of a pty is reset on first open so that - * settings don't persist across reuse. + * Open-counting is needed for pty masters, as well as for keeping + * track of serial lines: DTR is dropped when the last close happens. + * (This is not done solely through tty->count, now. - Ted 1/27/92) + * + * The termios state of a pty is reset on first open so that + * settings don't persist across reuse. + * + * Locking: tty_mutex protects current->signal->tty, get_tty_driver and + * init_dev work. tty->count should protect the rest. + * task_lock is held to update task details for sessions */ + static int tty_open(struct inode * inode, struct file * filp) { struct tty_struct *tty; @@ -2132,6 +2498,18 @@ got_driver: } #ifdef CONFIG_UNIX98_PTYS +/** + * ptmx_open - open a unix 98 pty master + * @inode: inode of device file + * @filp: file pointer to tty + * + * Allocate a unix98 pty master device from the ptmx driver. + * + * Locking: tty_mutex protects theinit_dev work. tty->count should + protect the rest. + * allocated_ptys_lock handles the list of free pty numbers + */ + static int ptmx_open(struct inode * inode, struct file * filp) { struct tty_struct *tty; @@ -2191,6 +2569,18 @@ out: } #endif +/** + * tty_release - vfs callback for close + * @inode: inode of tty + * @filp: file pointer for handle to tty + * + * Called the last time each file handle is closed that references + * this tty. There may however be several such references. + * + * Locking: + * Takes bkl. See release_dev + */ + static int tty_release(struct inode * inode, struct file * filp) { lock_kernel(); @@ -2199,7 +2589,18 @@ static int tty_release(struct inode * inode, struct file * filp) return 0; } -/* No kernel lock held - fine */ +/** + * tty_poll - check tty status + * @filp: file being polled + * @wait: poll wait structures to update + * + * Call the line discipline polling method to obtain the poll + * status of the device. + * + * Locking: locks called line discipline but ldisc poll method + * may be re-entered freely by other callers. + */ + static unsigned int tty_poll(struct file * filp, poll_table * wait) { struct tty_struct * tty; @@ -2243,6 +2644,21 @@ static int tty_fasync(int fd, struct file * filp, int on) return 0; } +/** + * tiocsti - fake input character + * @tty: tty to fake input into + * @p: pointer to character + * + * Fake input to a tty device. Does the neccessary locking and + * input management. + * + * FIXME: does not honour flow control ?? + * + * Locking: + * Called functions take tty_ldisc_lock + * current->signal->tty check is safe without locks + */ + static int tiocsti(struct tty_struct *tty, char __user *p) { char ch, mbz = 0; @@ -2258,6 +2674,18 @@ static int tiocsti(struct tty_struct *tty, char __user *p) return 0; } +/** + * tiocgwinsz - implement window query ioctl + * @tty; tty + * @arg: user buffer for result + * + * Copies the kernel idea of the window size into the user buffer. No + * locking is done. + * + * FIXME: Returning random values racing a window size set is wrong + * should lock here against that + */ + static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg) { if (copy_to_user(arg, &tty->winsize, sizeof(*arg))) @@ -2265,6 +2693,24 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg) return 0; } +/** + * tiocswinsz - implement window size set ioctl + * @tty; tty + * @arg: user buffer for result + * + * Copies the user idea of the window size to the kernel. Traditionally + * this is just advisory information but for the Linux console it + * actually has driver level meaning and triggers a VC resize. + * + * Locking: + * The console_sem is used to ensure we do not try and resize + * the console twice at once. + * FIXME: Two racing size sets may leave the console and kernel + * parameters disagreeing. Is this exploitable ? + * FIXME: Random values racing a window size get is wrong + * should lock here against that + */ + static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, struct winsize __user * arg) { @@ -2294,6 +2740,15 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, return 0; } +/** + * tioccons - allow admin to move logical console + * @file: the file to become console + * + * Allow the adminstrator to move the redirected console device + * + * Locking: uses redirect_lock to guard the redirect information + */ + static int tioccons(struct file *file) { if (!capable(CAP_SYS_ADMIN)) @@ -2319,6 +2774,17 @@ static int tioccons(struct file *file) return 0; } +/** + * fionbio - non blocking ioctl + * @file: file to set blocking value + * @p: user parameter + * + * Historical tty interfaces had a blocking control ioctl before + * the generic functionality existed. This piece of history is preserved + * in the expected tty API of posix OS's. + * + * Locking: none, the open fle handle ensures it won't go away. + */ static int fionbio(struct file *file, int __user *p) { @@ -2334,6 +2800,23 @@ static int fionbio(struct file *file, int __user *p) return 0; } +/** + * tiocsctty - set controlling tty + * @tty: tty structure + * @arg: user argument + * + * This ioctl is used to manage job control. It permits a session + * leader to set this tty as the controlling tty for the session. + * + * Locking: + * Takes tasklist lock internally to walk sessions + * Takes task_lock() when updating signal->tty + * + * FIXME: tty_mutex is needed to protect signal->tty references. + * FIXME: why task_lock on the signal->tty reference ?? + * + */ + static int tiocsctty(struct tty_struct *tty, int arg) { struct task_struct *p; @@ -2374,6 +2857,18 @@ static int tiocsctty(struct tty_struct *tty, int arg) return 0; } +/** + * tiocgpgrp - get process group + * @tty: tty passed by user + * @real_tty: tty side of the tty pased by the user if a pty else the tty + * @p: returned pid + * + * Obtain the process group of the tty. If there is no process group + * return an error. + * + * Locking: none. Reference to ->signal->tty is safe. + */ + static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) { /* @@ -2385,6 +2880,20 @@ static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t return put_user(real_tty->pgrp, p); } +/** + * tiocspgrp - attempt to set process group + * @tty: tty passed by user + * @real_tty: tty side device matching tty passed by user + * @p: pid pointer + * + * Set the process group of the tty to the session passed. Only + * permitted where the tty session is our session. + * + * Locking: None + * + * FIXME: current->signal->tty referencing is unsafe. + */ + static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) { pid_t pgrp; @@ -2408,6 +2917,18 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t return 0; } +/** + * tiocgsid - get session id + * @tty: tty passed by user + * @real_tty: tty side of the tty pased by the user if a pty else the tty + * @p: pointer to returned session id + * + * Obtain the session id of the tty. If there is no session + * return an error. + * + * Locking: none. Reference to ->signal->tty is safe. + */ + static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) { /* @@ -2421,6 +2942,16 @@ static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t _ return put_user(real_tty->session, p); } +/** + * tiocsetd - set line discipline + * @tty: tty device + * @p: pointer to user data + * + * Set the line discipline according to user request. + * + * Locking: see tty_set_ldisc, this function is just a helper + */ + static int tiocsetd(struct tty_struct *tty, int __user *p) { int ldisc; @@ -2430,6 +2961,21 @@ static int tiocsetd(struct tty_struct *tty, int __user *p) return tty_set_ldisc(tty, ldisc); } +/** + * send_break - performed time break + * @tty: device to break on + * @duration: timeout in mS + * + * Perform a timed break on hardware that lacks its own driver level + * timed break functionality. + * + * Locking: + * None + * + * FIXME: + * What if two overlap + */ + static int send_break(struct tty_struct *tty, unsigned int duration) { tty->driver->break_ctl(tty, -1); @@ -2442,8 +2988,19 @@ static int send_break(struct tty_struct *tty, unsigned int duration) return 0; } -static int -tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p) +/** + * tiocmget - get modem status + * @tty: tty device + * @file: user file pointer + * @p: pointer to result + * + * Obtain the modem status bits from the tty driver if the feature + * is supported. Return -EINVAL if it is not available. + * + * Locking: none (up to the driver) + */ + +static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p) { int retval = -EINVAL; @@ -2456,8 +3013,20 @@ tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p) return retval; } -static int -tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd, +/** + * tiocmset - set modem status + * @tty: tty device + * @file: user file pointer + * @cmd: command - clear bits, set bits or set all + * @p: pointer to desired bits + * + * Set the modem status bits from the tty driver if the feature + * is supported. Return -EINVAL if it is not available. + * + * Locking: none (up to the driver) + */ + +static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned __user *p) { int retval = -EINVAL; @@ -2573,6 +3142,7 @@ int tty_ioctl(struct inode * inode, struct file * file, clear_bit(TTY_EXCLUSIVE, &tty->flags); return 0; case TIOCNOTTY: + /* FIXME: taks lock or tty_mutex ? */ if (current->signal->tty != tty) return -ENOTTY; if (current->signal->leader) @@ -2753,9 +3323,16 @@ void do_SAK(struct tty_struct *tty) EXPORT_SYMBOL(do_SAK); -/* - * This routine is called out of the software interrupt to flush data - * from the buffer chain to the line discipline. +/** + * flush_to_ldisc + * @private_: tty structure passed from work queue. + * + * This routine is called out of the software interrupt to flush data + * from the buffer chain to the line discipline. + * + * Locking: holds tty->buf.lock to guard buffer list. Drops the lock + * while invoking the line discipline receive_buf method. The + * receive_buf method is single threaded for each tty instance. */ static void flush_to_ldisc(void *private_) @@ -2831,6 +3408,8 @@ static int n_baud_table = ARRAY_SIZE(baud_table); * Convert termios baud rate data into a speed. This should be called * with the termios lock held if this termios is a terminal termios * structure. May change the termios data. + * + * Locking: none */ int tty_termios_baud_rate(struct termios *termios) @@ -2859,6 +3438,8 @@ EXPORT_SYMBOL(tty_termios_baud_rate); * Returns the baud rate as an integer for this terminal. The * termios lock must be held by the caller and the terminal bit * flags may be updated. + * + * Locking: none */ int tty_get_baud_rate(struct tty_struct *tty) @@ -2888,6 +3469,8 @@ EXPORT_SYMBOL(tty_get_baud_rate); * * In the event of the queue being busy for flipping the work will be * held off and retried later. + * + * Locking: tty buffer lock. Driver locks in low latency mode. */ void tty_flip_buffer_push(struct tty_struct *tty) @@ -2907,9 +3490,16 @@ void tty_flip_buffer_push(struct tty_struct *tty) EXPORT_SYMBOL(tty_flip_buffer_push); -/* - * This subroutine initializes a tty structure. +/** + * initialize_tty_struct + * @tty: tty to initialize + * + * This subroutine initializes a tty structure that has been newly + * allocated. + * + * Locking: none - tty in question must not be exposed at this point */ + static void initialize_tty_struct(struct tty_struct *tty) { memset(tty, 0, sizeof(struct tty_struct)); @@ -2935,6 +3525,7 @@ static void initialize_tty_struct(struct tty_struct *tty) /* * The default put_char routine if the driver did not define one. */ + static void tty_default_put_char(struct tty_struct *tty, unsigned char ch) { tty->driver->write(tty, &ch, 1); @@ -2943,19 +3534,23 @@ static void tty_default_put_char(struct tty_struct *tty, unsigned char ch) static struct class *tty_class; /** - * tty_register_device - register a tty device - * @driver: the tty driver that describes the tty device - * @index: the index in the tty driver for this tty device - * @device: a struct device that is associated with this tty device. - * This field is optional, if there is no known struct device for this - * tty device it can be set to NULL safely. + * tty_register_device - register a tty device + * @driver: the tty driver that describes the tty device + * @index: the index in the tty driver for this tty device + * @device: a struct device that is associated with this tty device. + * This field is optional, if there is no known struct device + * for this tty device it can be set to NULL safely. * - * Returns a pointer to the class device (or ERR_PTR(-EFOO) on error). + * Returns a pointer to the class device (or ERR_PTR(-EFOO) on error). * - * This call is required to be made to register an individual tty device if - * the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If that - * bit is not set, this function should not be called by a tty driver. + * This call is required to be made to register an individual tty device + * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If + * that bit is not set, this function should not be called by a tty + * driver. + * + * Locking: ?? */ + struct class_device *tty_register_device(struct tty_driver *driver, unsigned index, struct device *device) { @@ -2977,13 +3572,16 @@ struct class_device *tty_register_device(struct tty_driver *driver, } /** - * tty_unregister_device - unregister a tty device - * @driver: the tty driver that describes the tty device - * @index: the index in the tty driver for this tty device + * tty_unregister_device - unregister a tty device + * @driver: the tty driver that describes the tty device + * @index: the index in the tty driver for this tty device * - * If a tty device is registered with a call to tty_register_device() then - * this function must be made when the tty device is gone. + * If a tty device is registered with a call to tty_register_device() then + * this function must be called when the tty device is gone. + * + * Locking: ?? */ + void tty_unregister_device(struct tty_driver *driver, unsigned index) { class_device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index); diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index f19cf9d7792d..4ad47d321bd4 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -36,6 +36,18 @@ #define TERMIOS_WAIT 2 #define TERMIOS_TERMIO 4 + +/** + * tty_wait_until_sent - wait for I/O to finish + * @tty: tty we are waiting for + * @timeout: how long we will wait + * + * Wait for characters pending in a tty driver to hit the wire, or + * for a timeout to occur (eg due to flow control) + * + * Locking: none + */ + void tty_wait_until_sent(struct tty_struct * tty, long timeout) { DECLARE_WAITQUEUE(wait, current); @@ -94,6 +106,18 @@ static void unset_locked_termios(struct termios *termios, old->c_cc[i] : termios->c_cc[i]; } +/** + * change_termios - update termios values + * @tty: tty to update + * @new_termios: desired new value + * + * Perform updates to the termios values set on this terminal. There + * is a bit of layering violation here with n_tty in terms of the + * internal knowledge of this function. + * + * Locking: termios_sem + */ + static void change_termios(struct tty_struct * tty, struct termios * new_termios) { int canon_change; @@ -155,6 +179,19 @@ static void change_termios(struct tty_struct * tty, struct termios * new_termios up(&tty->termios_sem); } +/** + * set_termios - set termios values for a tty + * @tty: terminal device + * @arg: user data + * @opt: option information + * + * Helper function to prepare termios data and run neccessary other + * functions before using change_termios to do the actual changes. + * + * Locking: + * Called functions take ldisc and termios_sem locks + */ + static int set_termios(struct tty_struct * tty, void __user *arg, int opt) { struct termios tmp_termios; @@ -284,6 +321,17 @@ static void set_sgflags(struct termios * termios, int flags) } } +/** + * set_sgttyb - set legacy terminal values + * @tty: tty structure + * @sgttyb: pointer to old style terminal structure + * + * Updates a terminal from the legacy BSD style terminal information + * structure. + * + * Locking: termios_sem + */ + static int set_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb) { int retval; @@ -369,9 +417,16 @@ static int set_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars) } #endif -/* - * Send a high priority character to the tty. +/** + * send_prio_char - send priority character + * + * Send a high priority character to the tty even if stopped + * + * Locking: none + * + * FIXME: overlapping calls with start/stop tty lose state of tty */ + static void send_prio_char(struct tty_struct *tty, char ch) { int was_stopped = tty->stopped; -- cgit v1.2.2 From 01da5fd83d6b2c5e36b77539f6cbdd8f49849225 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 27 Aug 2006 01:24:02 -0700 Subject: [PATCH] Fix tty layer DoS and comment relevant code Unlike the other tty comment patch this one has code changes. Specifically it limits the queue size for a tty to 64K characters (128Kbytes) worst case even if the tty is ignoring tty->throttle. This is because certain drivers don't honour the throttle value correctly, although it is a useful safeguard anyway. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 89 +++++++++++++++++++++++++++++++++++++++++++++------ include/linux/tty.h | 1 + 2 files changed, 80 insertions(+), 10 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 2cef982585f0..bb0d9199e994 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -265,6 +265,17 @@ static int check_tty_count(struct tty_struct *tty, const char *routine) */ +/** + * tty_buffer_free_all - free buffers used by a tty + * @tty: tty to free from + * + * Remove all the buffers pending on a tty whether queued with data + * or in the free ring. Must be called when the tty is no longer in use + * + * Locking: none + */ + + /** * tty_buffer_free_all - free buffers used by a tty * @tty: tty to free from @@ -287,19 +298,47 @@ static void tty_buffer_free_all(struct tty_struct *tty) kfree(thead); } tty->buf.tail = NULL; + tty->buf.memory_used = 0; } +/** + * tty_buffer_init - prepare a tty buffer structure + * @tty: tty to initialise + * + * Set up the initial state of the buffer management for a tty device. + * Must be called before the other tty buffer functions are used. + * + * Locking: none + */ + static void tty_buffer_init(struct tty_struct *tty) { spin_lock_init(&tty->buf.lock); tty->buf.head = NULL; tty->buf.tail = NULL; tty->buf.free = NULL; + tty->buf.memory_used = 0; } -static struct tty_buffer *tty_buffer_alloc(size_t size) +/** + * tty_buffer_alloc - allocate a tty buffer + * @tty: tty device + * @size: desired size (characters) + * + * Allocate a new tty buffer to hold the desired number of characters. + * Return NULL if out of memory or the allocation would exceed the + * per device queue + * + * Locking: Caller must hold tty->buf.lock + */ + +static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size) { - struct tty_buffer *p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); + struct tty_buffer *p; + + if (tty->buf.memory_used + size > 65536) + return NULL; + p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); if(p == NULL) return NULL; p->used = 0; @@ -309,17 +348,27 @@ static struct tty_buffer *tty_buffer_alloc(size_t size) p->read = 0; p->char_buf_ptr = (char *)(p->data); p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size; -/* printk("Flip create %p\n", p); */ + tty->buf.memory_used += size; return p; } -/* Must be called with the tty_read lock held. This needs to acquire strategy - code to decide if we should kfree or relink a given expired buffer */ +/** + * tty_buffer_free - free a tty buffer + * @tty: tty owning the buffer + * @b: the buffer to free + * + * Free a tty buffer, or add it to the free list according to our + * internal strategy + * + * Locking: Caller must hold tty->buf.lock + */ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b) { /* Dumb strategy for now - should keep some stats */ -/* printk("Flip dispose %p\n", b); */ + tty->buf.memory_used -= b->size; + WARN_ON(tty->buf.memory_used < 0); + if(b->size >= 512) kfree(b); else { @@ -328,6 +377,18 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b) } } +/** + * tty_buffer_find - find a free tty buffer + * @tty: tty owning the buffer + * @size: characters wanted + * + * Locate an existing suitable tty buffer or if we are lacking one then + * allocate a new one. We round our buffers off in 256 character chunks + * to get better allocation behaviour. + * + * Locking: Caller must hold tty->buf.lock + */ + static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) { struct tty_buffer **tbh = &tty->buf.free; @@ -339,20 +400,28 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) t->used = 0; t->commit = 0; t->read = 0; - /* DEBUG ONLY */ -/* memset(t->data, '*', size); */ -/* printk("Flip recycle %p\n", t); */ + tty->buf.memory_used += t->size; return t; } tbh = &((*tbh)->next); } /* Round the buffer size out */ size = (size + 0xFF) & ~ 0xFF; - return tty_buffer_alloc(size); + return tty_buffer_alloc(tty, size); /* Should possibly check if this fails for the largest buffer we have queued and recycle that ? */ } +/** + * tty_buffer_request_room - grow tty buffer if needed + * @tty: tty structure + * @size: size desired + * + * Make at least size bytes of linear space available for the tty + * buffer. If we fail return the size we managed to find. + * + * Locking: Takes tty->buf.lock + */ int tty_buffer_request_room(struct tty_struct *tty, size_t size) { struct tty_buffer *b, *n; diff --git a/include/linux/tty.h b/include/linux/tty.h index e421d5e34818..04827ca65781 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -59,6 +59,7 @@ struct tty_bufhead { struct tty_buffer *head; /* Queue head */ struct tty_buffer *tail; /* Active buffer */ struct tty_buffer *free; /* Free queue head */ + int memory_used; /* Buffer space used excluding free queue */ }; /* * The pty uses char_buf and flag_buf as a contiguous buffer -- cgit v1.2.2 From 60d4684068ff1eec78f55b5888d0bd2d4cca1520 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 27 Aug 2006 20:41:48 -0700 Subject: Linux v2.6.18-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 8406d02c6385..33559b566449 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 18 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME=Crazed Snow-Weasel # *DOCUMENTATION* -- cgit v1.2.2 From 7034b0e60a2ccfab4ee2d3a468cb8cad6de3740d Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 28 Aug 2006 12:44:03 +0100 Subject: [ARM] Arrange for isa.c to use named initialisers Convert isa.c (the glibc interface for emulating ISA IO) to use named initialisers. Signed-off-by: Russell King --- arch/arm/kernel/isa.c | 63 ++++++++++++++++++++++++++++++++++----------------- 1 file changed, 42 insertions(+), 21 deletions(-) diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c index 685c3e591a7e..54bbd9fe255c 100644 --- a/arch/arm/kernel/isa.c +++ b/arch/arm/kernel/isa.c @@ -3,21 +3,14 @@ * * Copyright (C) 1999 Phil Blundell * - * ISA shared memory and I/O port support - */ - -/* * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. + * + * ISA shared memory and I/O port support, and is required to support + * iopl, inb, outb and friends in userspace via glibc emulation. */ - -/* - * Nothing about this is actually ARM specific. One day we could move - * it into kernel/resource.c or some place like that. - */ - #include #include #include @@ -27,21 +20,49 @@ static unsigned int isa_membase, isa_portbase, isa_portshift; static ctl_table ctl_isa_vars[4] = { - {BUS_ISA_MEM_BASE, "membase", &isa_membase, - sizeof(isa_membase), 0444, NULL, &proc_dointvec}, - {BUS_ISA_PORT_BASE, "portbase", &isa_portbase, - sizeof(isa_portbase), 0444, NULL, &proc_dointvec}, - {BUS_ISA_PORT_SHIFT, "portshift", &isa_portshift, - sizeof(isa_portshift), 0444, NULL, &proc_dointvec}, - {0} + { + .ctl_name = BUS_ISA_MEM_BASE, + .procname = "membase", + .data = &isa_membase, + .maxlen = sizeof(isa_membase), + .mode = 0444, + .proc_handler = &proc_dointvec, + }, { + .ctl_name = BUS_ISA_PORT_BASE, + .procname = "portbase", + .data = &isa_portbase, + .maxlen = sizeof(isa_portbase), + .mode = 0444, + .proc_handler = &proc_dointvec, + }, { + .ctl_name = BUS_ISA_PORT_SHIFT, + .procname = "portshift", + .data = &isa_portshift, + .maxlen = sizeof(isa_portshift), + .mode = 0444, + .proc_handler = &proc_dointvec, + }, {0} }; static struct ctl_table_header *isa_sysctl_header; -static ctl_table ctl_isa[2] = {{CTL_BUS_ISA, "isa", NULL, 0, 0555, ctl_isa_vars}, - {0}}; -static ctl_table ctl_bus[2] = {{CTL_BUS, "bus", NULL, 0, 0555, ctl_isa}, - {0}}; +static ctl_table ctl_isa[2] = { + { + .ctl_name = CTL_BUS_ISA, + .procname = "isa", + .mode = 0555, + .child = ctl_isa_vars, + }, {0} +}; + +static ctl_table ctl_bus[2] = { + { + .ctl_name = CTL_BUS, + .procname = "bus", + .mode = 0555, + .child = ctl_isa, + }, {0} +}; void __init register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int portshift) -- cgit v1.2.2 From 1645f20bc4440d6f67f73f570f3cf873b4e37f3c Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 28 Aug 2006 12:45:16 +0100 Subject: [ARM] Move prototype for register_isa_ports to asm/io.h Signed-off-by: Russell King --- arch/arm/mach-footbridge/dc21285.c | 1 - include/asm-arm/io.h | 7 +++++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 607ed1f5b3f8..823e25d4547e 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -35,7 +35,6 @@ extern int setup_arm_irq(int, struct irqaction *); extern void pcibios_report_status(u_int status_mask, int warn); -extern void register_isa_ports(unsigned int, unsigned int, unsigned int); static unsigned long dc21285_base_address(struct pci_bus *bus, unsigned int devfn) diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index b3479fc1cc8f..bf7b9dea30f1 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -291,5 +291,12 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); */ #define xlate_dev_kmem_ptr(p) p +/* + * Register ISA memory and port locations for glibc iopl/inb/outb + * emulation. + */ +extern void register_isa_ports(unsigned int mmio, unsigned int io, + unsigned int io_shift); + #endif /* __KERNEL__ */ #endif /* __ASM_ARM_IO_H */ -- cgit v1.2.2 From 863dab453b869136453944bda63e20b6ed39c5ef Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 28 Aug 2006 12:47:05 +0100 Subject: [ARM] Add Integrator support for glibc outb() and friends Add the necessary call to register_isa_ports() so that glibc knows where these are found on Integrator platforms. Signed-off-by: Russell King --- arch/arm/kernel/Makefile | 3 +-- arch/arm/mach-integrator/pci_v3.c | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index f0c0cdb1c183..1320a0efca73 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -13,12 +13,11 @@ obj-y := compat.o entry-armv.o entry-common.o irq.o \ obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o -obj-$(CONFIG_FOOTBRIDGE) += isa.o obj-$(CONFIG_FIQ) += fiq.o obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o -obj-$(CONFIG_PCI) += bios32.o +obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index f9043592e299..4418f6d7572d 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -600,4 +600,6 @@ void __init pci_v3_postinit(void) printk(KERN_ERR "PCI: unable to grab local bus timeout " "interrupt: %d\n", ret); #endif + + register_isa_ports(PHYS_PCI_MEM_BASE, PHYS_PCI_IO_BASE, 0); } -- cgit v1.2.2 From 260e98edc8ae8ea862c9c222eeffb1a2eeafa7fc Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 28 Aug 2006 12:51:20 +0100 Subject: [ARM] 3761/1: fix armv4t breakage after adding thumb interworking to userspace helpers Patch from Lennert Buytenhek On armv4t systems, we have always compiled the kernel with -march=armv4 instead of -march=armv4t, which means that any use of bx will bomb out. Commit ba9b5d76372dc290b6ca04dad93927a22c2ac49a introduced the use of bx in the kernel, which means we need to compile with -march=armv4t on armv4t systems now. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/Makefile | 3 ++- arch/arm/mm/Kconfig | 13 +++++++++---- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 3345c6d0fd1e..92873cdee31f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -47,7 +47,8 @@ comma = , # testing for a specific architecture or later rather impossible. arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k) -arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4) +arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t) +arch-$(CONFIG_CPU_32v4T) :=-D__LINUX_ARM_ARCH__=4 -march=armv4t arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4 arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3 diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5f80f184cd32..b4f220dd5eb8 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -46,7 +46,7 @@ config CPU_ARM710 config CPU_ARM720T bool "Support ARM720T processor" if !ARCH_CLPS711X && !ARCH_L7200 && !ARCH_CDB89712 && ARCH_INTEGRATOR default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X - select CPU_32v4 + select CPU_32v4T select CPU_ABRT_LV4T select CPU_CACHE_V4 select CPU_CACHE_VIVT @@ -64,7 +64,7 @@ config CPU_ARM920T bool "Support ARM920T processor" depends on ARCH_EP93XX || ARCH_INTEGRATOR || CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200 - select CPU_32v4 + select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT @@ -85,7 +85,7 @@ config CPU_ARM922T bool "Support ARM922T processor" if ARCH_INTEGRATOR depends on ARCH_LH7A40X || ARCH_INTEGRATOR default y if ARCH_LH7A40X - select CPU_32v4 + select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT @@ -104,7 +104,7 @@ config CPU_ARM925T bool "Support ARM925T processor" if ARCH_OMAP1 depends on ARCH_OMAP15XX default y if ARCH_OMAP15XX - select CPU_32v4 + select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT @@ -285,6 +285,11 @@ config CPU_32v4 select TLS_REG_EMUL if SMP || !MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP +config CPU_32v4T + bool + select TLS_REG_EMUL if SMP || !MMU + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + config CPU_32v5 bool select TLS_REG_EMUL if SMP || !MMU -- cgit v1.2.2