From e18ce3465477502108187c6c08b6423fb784a313 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Tue, 16 Dec 2008 02:00:00 -0800 Subject: net: Move flow control definitions to mii.h flags used within drivers for indicating tx and rx flow control are defined in 4 drivers (and probably more), move these constants to mii.h. The 3 SMSC drivers use the same constants (FLOW_CTRL_TX), but TG3 uses TG3_FLOW_CTRL_TX, so this patch also renames the constants within TG3. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc911x.h | 3 --- drivers/net/smsc9420.h | 3 --- drivers/net/tg3.c | 50 +++++++++++++++++++++++----------------------- drivers/net/tg3.h | 2 -- drivers/net/usb/smsc95xx.c | 2 -- include/linux/mii.h | 4 ++++ 6 files changed, 29 insertions(+), 35 deletions(-) diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h index f818cf0415f7..2b76654bb958 100644 --- a/drivers/net/smsc911x.h +++ b/drivers/net/smsc911x.h @@ -61,9 +61,6 @@ #define SMSC_ASSERT_MAC_LOCK(pdata) do {} while (0) #endif /* CONFIG_DEBUG_SPINLOCK */ -#define FLOW_CTRL_TX (1) -#define FLOW_CTRL_RX (2) - /* SMSC911x registers and bitfields */ #define RX_DATA_FIFO 0x00 diff --git a/drivers/net/smsc9420.h b/drivers/net/smsc9420.h index 80c426dc4325..69c351f93f86 100644 --- a/drivers/net/smsc9420.h +++ b/drivers/net/smsc9420.h @@ -45,9 +45,6 @@ #define SMSC9420_EEPROM_SIZE ((u32)11) -#define FLOW_CTRL_TX (1) -#define FLOW_CTRL_RX (2) - #define PKT_BUF_SZ (VLAN_ETH_FRAME_LEN + NET_IP_ALIGN + 4) /***********************************************/ diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6e40d52107a4..f353f69caeb8 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1187,9 +1187,9 @@ static void tg3_link_report(struct tg3 *tp) printk(KERN_INFO PFX "%s: Flow control is %s for TX and %s for RX.\n", tp->dev->name, - (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX) ? + (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ? "on" : "off", - (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX) ? + (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ? "on" : "off"); tg3_ump_link_report(tp); } @@ -1199,11 +1199,11 @@ static u16 tg3_advert_flowctrl_1000T(u8 flow_ctrl) { u16 miireg; - if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX)) + if ((flow_ctrl & FLOW_CTRL_TX) && (flow_ctrl & FLOW_CTRL_RX)) miireg = ADVERTISE_PAUSE_CAP; - else if (flow_ctrl & TG3_FLOW_CTRL_TX) + else if (flow_ctrl & FLOW_CTRL_TX) miireg = ADVERTISE_PAUSE_ASYM; - else if (flow_ctrl & TG3_FLOW_CTRL_RX) + else if (flow_ctrl & FLOW_CTRL_RX) miireg = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; else miireg = 0; @@ -1215,11 +1215,11 @@ static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl) { u16 miireg; - if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX)) + if ((flow_ctrl & FLOW_CTRL_TX) && (flow_ctrl & FLOW_CTRL_RX)) miireg = ADVERTISE_1000XPAUSE; - else if (flow_ctrl & TG3_FLOW_CTRL_TX) + else if (flow_ctrl & FLOW_CTRL_TX) miireg = ADVERTISE_1000XPSE_ASYM; - else if (flow_ctrl & TG3_FLOW_CTRL_RX) + else if (flow_ctrl & FLOW_CTRL_RX) miireg = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM; else miireg = 0; @@ -1256,16 +1256,16 @@ static u8 tg3_resolve_flowctrl_1000X(u16 lcladv, u16 rmtadv) if (lcladv & ADVERTISE_1000XPAUSE) { if (lcladv & ADVERTISE_1000XPSE_ASYM) { if (rmtadv & LPA_1000XPAUSE) - cap = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX; + cap = FLOW_CTRL_TX | FLOW_CTRL_RX; else if (rmtadv & LPA_1000XPAUSE_ASYM) - cap = TG3_FLOW_CTRL_RX; + cap = FLOW_CTRL_RX; } else { if (rmtadv & LPA_1000XPAUSE) - cap = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX; + cap = FLOW_CTRL_TX | FLOW_CTRL_RX; } } else if (lcladv & ADVERTISE_1000XPSE_ASYM) { if ((rmtadv & LPA_1000XPAUSE) && (rmtadv & LPA_1000XPAUSE_ASYM)) - cap = TG3_FLOW_CTRL_TX; + cap = FLOW_CTRL_TX; } return cap; @@ -1294,7 +1294,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv) tp->link_config.active_flowctrl = flowctrl; - if (flowctrl & TG3_FLOW_CTRL_RX) + if (flowctrl & FLOW_CTRL_RX) tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE; else tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE; @@ -1302,7 +1302,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv) if (old_rx_mode != tp->rx_mode) tw32_f(MAC_RX_MODE, tp->rx_mode); - if (flowctrl & TG3_FLOW_CTRL_TX) + if (flowctrl & FLOW_CTRL_TX) tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE; else tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE; @@ -9419,12 +9419,12 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0; - if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX) + if (tp->link_config.active_flowctrl & FLOW_CTRL_RX) epause->rx_pause = 1; else epause->rx_pause = 0; - if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX) + if (tp->link_config.active_flowctrl & FLOW_CTRL_TX) epause->tx_pause = 1; else epause->tx_pause = 0; @@ -9475,14 +9475,14 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam } } else { if (epause->rx_pause) - tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX; + tp->link_config.flowctrl |= FLOW_CTRL_RX; else - tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX; + tp->link_config.flowctrl &= ~FLOW_CTRL_RX; if (epause->tx_pause) - tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX; + tp->link_config.flowctrl |= FLOW_CTRL_TX; else - tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX; + tp->link_config.flowctrl &= ~FLOW_CTRL_TX; if (netif_running(dev)) tg3_setup_flow_control(tp, 0, 0); @@ -9502,13 +9502,13 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam else tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG; if (epause->rx_pause) - tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX; + tp->link_config.flowctrl |= FLOW_CTRL_RX; else - tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX; + tp->link_config.flowctrl &= ~FLOW_CTRL_RX; if (epause->tx_pause) - tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX; + tp->link_config.flowctrl |= FLOW_CTRL_TX; else - tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX; + tp->link_config.flowctrl &= ~FLOW_CTRL_TX; if (netif_running(dev)) { tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); @@ -13849,7 +13849,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, /* flow control autonegotiation is default behavior */ tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG; - tp->link_config.flowctrl = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX; + tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; tg3_init_coal(tp); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 61556764a505..0880cfacdcba 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2338,8 +2338,6 @@ struct tg3_link_config { u8 duplex; u8 autoneg; u8 flowctrl; -#define TG3_FLOW_CTRL_TX 0x01 -#define TG3_FLOW_CTRL_RX 0x02 /* Describes what we actually have. */ u8 active_flowctrl; diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 4638a7bb471e..ee2eac3047b3 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -45,8 +45,6 @@ #define SMSC95XX_INTERNAL_PHY_ID (1) #define SMSC95XX_TX_OVERHEAD (8) #define SMSC95XX_TX_OVERHEAD_CSUM (12) -#define FLOW_CTRL_TX (1) -#define FLOW_CTRL_RX (2) struct smsc95xx_priv { u32 mac_cr; diff --git a/include/linux/mii.h b/include/linux/mii.h index 151b7e0182c7..4a376e0816fd 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -135,6 +135,10 @@ #define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ #define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ +/* Flow control flags */ +#define FLOW_CTRL_TX 0x01 +#define FLOW_CTRL_RX 0x02 + /* This structure is used in all SIOCxMIIxxx ioctl calls */ struct mii_ioctl_data { __u16 phy_id; -- cgit v1.2.2