From 4479ff76c43607b680f9349128d8493228b49dce Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 9 Sep 2013 09:39:01 +0200 Subject: xfrm: Fix replay size checking on async events We pass the wrong netlink attribute to xfrm_replay_verify_len(). It should be XFRMA_REPLAY_ESN_VAL and not XFRMA_REPLAY_VAL as we currently doing. This causes memory corruptions if the replay esn attribute has incorrect length. Fix this by passing the right attribute to xfrm_replay_verify_len(). Reported-by: Michael Rossberg Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 3f565e495ac6..4b26ceedff26 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1856,7 +1856,7 @@ static int xfrm_new_ae(struct sk_buff *skb, struct nlmsghdr *nlh, if (x->km.state != XFRM_STATE_VALID) goto out; - err = xfrm_replay_verify_len(x->replay_esn, rp); + err = xfrm_replay_verify_len(x->replay_esn, re); if (err) goto out; -- cgit v1.2.2 From bafd4bd4dcfa13145db7f951251eef3e10f8c278 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 9 Sep 2013 10:38:38 +0200 Subject: xfrm: Decode sessions with output interface. The output interface matching does not work on forward policy lookups, the output interface of the flowi is always 0. Fix this by setting the output interface when we decode the session. Signed-off-by: Steffen Klassert --- net/ipv4/xfrm4_policy.c | 1 + net/ipv6/xfrm6_policy.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c index 9a459be24af7..ccde54248c8c 100644 --- a/net/ipv4/xfrm4_policy.c +++ b/net/ipv4/xfrm4_policy.c @@ -107,6 +107,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse) memset(fl4, 0, sizeof(struct flowi4)); fl4->flowi4_mark = skb->mark; + fl4->flowi4_oif = skb_dst(skb)->dev->ifindex; if (!ip_is_fragment(iph)) { switch (iph->protocol) { diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index 23ed03d786c8..08ed2772b7aa 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -138,6 +138,7 @@ _decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse) memset(fl6, 0, sizeof(struct flowi6)); fl6->flowi6_mark = skb->mark; + fl6->flowi6_oif = skb_dst(skb)->dev->ifindex; fl6->daddr = reverse ? hdr->saddr : hdr->daddr; fl6->saddr = reverse ? hdr->daddr : hdr->saddr; -- cgit v1.2.2 From b3b2b9e192d5811f91f9cd92aeec489cecabc92e Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 10 Sep 2013 13:43:09 +0200 Subject: ipsec: Don't update the pmtu on ICMPV6_DEST_UNREACH Currently we update the pmtu in the IPsec protocol error handlers if icmpv6 message type is either ICMPV6_DEST_UNREACH or ICMPV6_PKT_TOOBIG. Updating the pmtu on ICMPV6_DEST_UNREACH is wrong in any case, it causes strangely fragmented packets. Only ICMPV6_PKT_TOOBIG signalizes pmtu discovery, so remove the ICMPV6_DEST_UNREACH check in the IPsec protocol error handlers. Signed-off-by: Steffen Klassert --- net/ipv6/ah6.c | 3 +-- net/ipv6/esp6.c | 3 +-- net/ipv6/ipcomp6.c | 3 +-- 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c index 73784c3d4642..82e1da3a40b9 100644 --- a/net/ipv6/ah6.c +++ b/net/ipv6/ah6.c @@ -618,8 +618,7 @@ static void ah6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, struct ip_auth_hdr *ah = (struct ip_auth_hdr*)(skb->data+offset); struct xfrm_state *x; - if (type != ICMPV6_DEST_UNREACH && - type != ICMPV6_PKT_TOOBIG && + if (type != ICMPV6_PKT_TOOBIG && type != NDISC_REDIRECT) return; diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index d3618a78fcac..e67e63f9858d 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -436,8 +436,7 @@ static void esp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, struct ip_esp_hdr *esph = (struct ip_esp_hdr *)(skb->data + offset); struct xfrm_state *x; - if (type != ICMPV6_DEST_UNREACH && - type != ICMPV6_PKT_TOOBIG && + if (type != ICMPV6_PKT_TOOBIG && type != NDISC_REDIRECT) return; diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c index 5636a912074a..ce507d9e1c90 100644 --- a/net/ipv6/ipcomp6.c +++ b/net/ipv6/ipcomp6.c @@ -64,8 +64,7 @@ static void ipcomp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, (struct ip_comp_hdr *)(skb->data + offset); struct xfrm_state *x; - if (type != ICMPV6_DEST_UNREACH && - type != ICMPV6_PKT_TOOBIG && + if (type != ICMPV6_PKT_TOOBIG && type != NDISC_REDIRECT) return; -- cgit v1.2.2 From 33fce60d6a6e137035f8e23a89d7fd55f3a24cda Mon Sep 17 00:00:00 2001 From: Fan Du Date: Tue, 17 Sep 2013 15:14:13 +0800 Subject: xfrm: Guard IPsec anti replay window against replay bitmap For legacy IPsec anti replay mechanism: bitmap in struct xfrm_replay_state could only provide a 32 bits window size limit in current design, thus user level parameter sadb_sa_replay should honor this limit, otherwise misleading outputs("replay=244") by setkey -D will be: 192.168.25.2 192.168.22.2 esp mode=transport spi=147561170(0x08cb9ad2) reqid=0(0x00000000) E: aes-cbc 9a8d7468 7655cf0b 719d27be b0ddaac2 A: hmac-sha1 2d2115c2 ebf7c126 1c54f186 3b139b58 264a7331 seq=0x00000000 replay=244 flags=0x00000000 state=mature created: Sep 17 14:00:00 2013 current: Sep 17 14:00:22 2013 diff: 22(s) hard: 30(s) soft: 26(s) last: Sep 17 14:00:00 2013 hard: 0(s) soft: 0(s) current: 1408(bytes) hard: 0(bytes) soft: 0(bytes) allocated: 22 hard: 0 soft: 0 sadb_seq=1 pid=4854 refcnt=0 192.168.22.2 192.168.25.2 esp mode=transport spi=255302123(0x0f3799eb) reqid=0(0x00000000) E: aes-cbc 6485d990 f61a6bd5 e5660252 608ad282 A: hmac-sha1 0cca811a eb4fa893 c47ae56c 98f6e413 87379a88 seq=0x00000000 replay=244 flags=0x00000000 state=mature created: Sep 17 14:00:00 2013 current: Sep 17 14:00:22 2013 diff: 22(s) hard: 30(s) soft: 26(s) last: Sep 17 14:00:00 2013 hard: 0(s) soft: 0(s) current: 1408(bytes) hard: 0(bytes) soft: 0(bytes) allocated: 22 hard: 0 soft: 0 sadb_seq=0 pid=4854 refcnt=0 And also, optimizing xfrm_replay_check window checking by setting the desirable x->props.replay_window with only doing the comparison once for all when xfrm_state is first born. Signed-off-by: Fan Du Signed-off-by: Steffen Klassert --- net/key/af_key.c | 3 ++- net/xfrm/xfrm_replay.c | 3 +-- net/xfrm/xfrm_user.c | 3 ++- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index 9d585370c5b4..911ef03bf8fb 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1098,7 +1098,8 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, x->id.proto = proto; x->id.spi = sa->sadb_sa_spi; - x->props.replay_window = sa->sadb_sa_replay; + x->props.replay_window = min_t(unsigned int, sa->sadb_sa_replay, + (sizeof(x->replay.bitmap) * 8)); if (sa->sadb_sa_flags & SADB_SAFLAGS_NOECN) x->props.flags |= XFRM_STATE_NOECN; if (sa->sadb_sa_flags & SADB_SAFLAGS_DECAP_DSCP) diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c index 8dafe6d3c6e4..eeca388effc7 100644 --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -129,8 +129,7 @@ static int xfrm_replay_check(struct xfrm_state *x, return 0; diff = x->replay.seq - seq; - if (diff >= min_t(unsigned int, x->props.replay_window, - sizeof(x->replay.bitmap) * 8)) { + if (diff >= x->props.replay_window) { x->stats.replay_window++; goto err; } diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 4b26ceedff26..f964d4c00ffb 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -446,7 +446,8 @@ static void copy_from_user_state(struct xfrm_state *x, struct xfrm_usersa_info * memcpy(&x->sel, &p->sel, sizeof(x->sel)); memcpy(&x->lft, &p->lft, sizeof(x->lft)); x->props.mode = p->mode; - x->props.replay_window = p->replay_window; + x->props.replay_window = min_t(unsigned int, p->replay_window, + sizeof(x->replay.bitmap) * 8); x->props.reqid = p->reqid; x->props.family = p->family; memcpy(&x->props.saddr, &p->saddr, sizeof(x->props.saddr)); -- cgit v1.2.2 From cd808fc9a6c7cd3a4311d9d2cffc4adbeaef5f6c Mon Sep 17 00:00:00 2001 From: Thomas Egerer Date: Thu, 19 Sep 2013 13:19:19 +0200 Subject: xfrm: Fix aevent generation for each received packet If asynchronous events are enabled for a particular netlink socket, the notify function is called by the advance function. The notify function creates and dispatches a km_event if a replay timeout occurred, or at least replay_maxdiff packets have been received since the last asynchronous event has been sent. The function is supposed to return if neither of the two events were detected for a state, or replay_maxdiff is equal to zero. Replay_maxdiff is initialized in xfrm_state_construct to the value of the xfrm.sysctl_aevent_rseqth (2 by default), and updated if for a state if the netlink attribute XFRMA_REPLAY_THRESH is set. If, however, replay_maxdiff is set to zero, then all of the three notify implementations perform a break from the switch statement instead of checking whether a timeout occurred, and -- if not -- return. As a result an asynchronous event is generated for every replay update of a state that has a zero replay_maxdiff value. This patch modifies the notify functions such that they immediately return if replay_maxdiff has the value zero, unless a timeout occurred. Signed-off-by: Thomas Egerer Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_replay.c | 51 ++++++++++++++++++++++++++------------------------ 1 file changed, 27 insertions(+), 24 deletions(-) diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c index eeca388effc7..dab57daae408 100644 --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -61,9 +61,9 @@ static void xfrm_replay_notify(struct xfrm_state *x, int event) switch (event) { case XFRM_REPLAY_UPDATE: - if (x->replay_maxdiff && - (x->replay.seq - x->preplay.seq < x->replay_maxdiff) && - (x->replay.oseq - x->preplay.oseq < x->replay_maxdiff)) { + if (!x->replay_maxdiff || + ((x->replay.seq - x->preplay.seq < x->replay_maxdiff) && + (x->replay.oseq - x->preplay.oseq < x->replay_maxdiff))) { if (x->xflags & XFRM_TIME_DEFER) event = XFRM_REPLAY_TIMEOUT; else @@ -301,9 +301,10 @@ static void xfrm_replay_notify_bmp(struct xfrm_state *x, int event) switch (event) { case XFRM_REPLAY_UPDATE: - if (x->replay_maxdiff && - (replay_esn->seq - preplay_esn->seq < x->replay_maxdiff) && - (replay_esn->oseq - preplay_esn->oseq < x->replay_maxdiff)) { + if (!x->replay_maxdiff || + ((replay_esn->seq - preplay_esn->seq < x->replay_maxdiff) && + (replay_esn->oseq - preplay_esn->oseq + < x->replay_maxdiff))) { if (x->xflags & XFRM_TIME_DEFER) event = XFRM_REPLAY_TIMEOUT; else @@ -352,28 +353,30 @@ static void xfrm_replay_notify_esn(struct xfrm_state *x, int event) switch (event) { case XFRM_REPLAY_UPDATE: - if (!x->replay_maxdiff) - break; - - if (replay_esn->seq_hi == preplay_esn->seq_hi) - seq_diff = replay_esn->seq - preplay_esn->seq; - else - seq_diff = ~preplay_esn->seq + replay_esn->seq + 1; - - if (replay_esn->oseq_hi == preplay_esn->oseq_hi) - oseq_diff = replay_esn->oseq - preplay_esn->oseq; - else - oseq_diff = ~preplay_esn->oseq + replay_esn->oseq + 1; - - if (seq_diff < x->replay_maxdiff && - oseq_diff < x->replay_maxdiff) { + if (x->replay_maxdiff) { + if (replay_esn->seq_hi == preplay_esn->seq_hi) + seq_diff = replay_esn->seq - preplay_esn->seq; + else + seq_diff = ~preplay_esn->seq + replay_esn->seq + + 1; - if (x->xflags & XFRM_TIME_DEFER) - event = XFRM_REPLAY_TIMEOUT; + if (replay_esn->oseq_hi == preplay_esn->oseq_hi) + oseq_diff = replay_esn->oseq + - preplay_esn->oseq; else - return; + oseq_diff = ~preplay_esn->oseq + + replay_esn->oseq + 1; + + if (seq_diff >= x->replay_maxdiff || + oseq_diff >= x->replay_maxdiff) + break; } + if (x->xflags & XFRM_TIME_DEFER) + event = XFRM_REPLAY_TIMEOUT; + else + return; + break; case XFRM_REPLAY_TIMEOUT: -- cgit v1.2.2 From 180032973ee97daddf5c9d733e5b425b108f8679 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 29 Aug 2013 13:26:57 +0300 Subject: cfg80211: use the correct macro to check for active monitor support Use MONITOR_FLAG_ACTIVE, which is a flag mask, instead of NL80211_MNTR_FLAG_ACTIVE, which is a flag index, when checking if the hardware supports active monitoring. Cc: stable@vger.kernel.org Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index af8d84a4a5b2..626dc3b5fd8d 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2421,7 +2421,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info) change = true; } - if (flags && (*flags & NL80211_MNTR_FLAG_ACTIVE) && + if (flags && (*flags & MONITOR_FLAG_ACTIVE) && !(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR)) return -EOPNOTSUPP; @@ -2483,7 +2483,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL, &flags); - if (!err && (flags & NL80211_MNTR_FLAG_ACTIVE) && + if (!err && (flags & MONITOR_FLAG_ACTIVE) && !(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR)) return -EOPNOTSUPP; -- cgit v1.2.2 From f478f33a93f9353dcd1fe55445343d76b1c3f84a Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 26 Sep 2013 16:55:28 +0100 Subject: cfg80211: fix warning when using WEXT for IBSS Fix kernel warning when using WEXT for configuring ad-hoc mode, e.g. "iwconfig wlan0 essid test channel 1" WARNING: at net/wireless/chan.c:373 cfg80211_chandef_usable+0x50/0x21c [cfg80211]() The warning is caused by an uninitialized variable center_freq1. Cc: stable@vger.kernel.org Signed-off-by: Bruno Randolf Signed-off-by: Johannes Berg --- net/wireless/ibss.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c index 39bff7d36768..403fe29c024d 100644 --- a/net/wireless/ibss.c +++ b/net/wireless/ibss.c @@ -263,6 +263,8 @@ int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev, if (chan->flags & IEEE80211_CHAN_DISABLED) continue; wdev->wext.ibss.chandef.chan = chan; + wdev->wext.ibss.chandef.center_freq1 = + chan->center_freq; break; } @@ -347,6 +349,7 @@ int cfg80211_ibss_wext_siwfreq(struct net_device *dev, if (chan) { wdev->wext.ibss.chandef.chan = chan; wdev->wext.ibss.chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + wdev->wext.ibss.chandef.center_freq1 = freq; wdev->wext.ibss.channel_fixed = true; } else { /* cfg80211_ibss_wext_join will pick one if needed */ -- cgit v1.2.2 From 6329b8d917adc077caa60c2447385554130853a3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 17 Sep 2013 11:15:43 +0200 Subject: mac80211: drop spoofed packets in ad-hoc mode If an Ad-Hoc node receives packets with the Cell ID or its own MAC address as source address, it hits a WARN_ON in sta_info_insert_check() With many packets, this can massively spam the logs. One way that this can easily happen is through having Cisco APs in the area with rouge AP detection and countermeasures enabled. Such Cisco APs will regularly send fake beacons, disassoc and deauth packets that trigger these warnings. To fix this issue, drop such spoofed packets early in the rx path. Cc: stable@vger.kernel.org Reported-by: Thomas Huehn Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 54395d7583ba..674eac1f996c 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -3056,6 +3056,9 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx, case NL80211_IFTYPE_ADHOC: if (!bssid) return 0; + if (ether_addr_equal(sdata->vif.addr, hdr->addr2) || + ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2)) + return 0; if (ieee80211_is_beacon(hdr->frame_control)) { return 1; } else if (!ieee80211_bssid_match(bssid, sdata->u.ibss.bssid)) { -- cgit v1.2.2 From cc63ec766b7821c8dc4dc1d1e980124aea96b553 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Sat, 7 Sep 2013 23:40:44 -0700 Subject: mac80211: fix the setting of extended supported rate IE The patch "mac80211: select and adjust bitrates according to channel mode" causes regression and breaks the extended supported rate IE setting. Since "i" is starting with 8, so this is not necessary to introduce "skip" here. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Colleen Twitty Reviewed-by: Jason Abele Signed-off-by: Johannes Berg --- net/mac80211/util.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e1b34a18b243..9c3200bcfc02 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2103,7 +2103,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; - int rate, skip, shift; + int rate, shift; u8 i, exrates, *pos; u32 basic_rates = sdata->vif.bss_conf.basic_rates; u32 rate_flags; @@ -2131,14 +2131,11 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, pos = skb_put(skb, exrates + 2); *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos++ = exrates; - skip = 0; for (i = 8; i < sband->n_bitrates; i++) { u8 basic = 0; if ((rate_flags & sband->bitrates[i].flags) != rate_flags) continue; - if (skip++ < 8) - continue; if (need_basic && basic_rates & BIT(i)) basic = 0x80; rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, -- cgit v1.2.2 From aa5f66d5a1df1c2b04bccdcb19711675c765d7c4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 26 Sep 2013 20:03:45 +0200 Subject: cfg80211: fix sysfs registration race My locking rework/race fixes caused a regression in the registration, causing uevent notifications for wireless devices before the device is really fully registered and available in nl80211. Fix this by moving the device_add() under rtnl and move the rfkill to afterwards (it can't be under rtnl.) Reported-and-tested-by: Maxime Bizon Signed-off-by: Johannes Berg --- net/wireless/core.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 67153964aad2..fe8d4f2be49b 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -566,18 +566,13 @@ int wiphy_register(struct wiphy *wiphy) /* check and set up bitrates */ ieee80211_set_bitrate_flags(wiphy); - + rtnl_lock(); res = device_add(&rdev->wiphy.dev); - if (res) - return res; - - res = rfkill_register(rdev->rfkill); if (res) { - device_del(&rdev->wiphy.dev); + rtnl_unlock(); return res; } - rtnl_lock(); /* set up regulatory info */ wiphy_regulatory_register(wiphy); @@ -606,6 +601,15 @@ int wiphy_register(struct wiphy *wiphy) rdev->wiphy.registered = true; rtnl_unlock(); + + res = rfkill_register(rdev->rfkill); + if (res) { + rfkill_destroy(rdev->rfkill); + rdev->rfkill = NULL; + wiphy_unregister(&rdev->wiphy); + return res; + } + return 0; } EXPORT_SYMBOL(wiphy_register); @@ -640,7 +644,8 @@ void wiphy_unregister(struct wiphy *wiphy) rtnl_unlock(); __count == 0; })); - rfkill_unregister(rdev->rfkill); + if (rdev->rfkill) + rfkill_unregister(rdev->rfkill); rtnl_lock(); rdev->wiphy.registered = false; -- cgit v1.2.2 From 03bb7f42765ce596604f03d179f3137d7df05bba Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 29 Sep 2013 21:39:33 +0200 Subject: mac80211: use sta_info_get_bss() for nl80211 tx and client probing This allows calls for clients in AP_VLANs (e.g. for 4-addr) to succeed Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 +- net/mac80211/tx.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 2e7855a1b10d..629dee7ec9bf 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -3518,7 +3518,7 @@ static int ieee80211_probe_client(struct wiphy *wiphy, struct net_device *dev, return -EINVAL; } band = chanctx_conf->def.chan->band; - sta = sta_info_get(sdata, peer); + sta = sta_info_get_bss(sdata, peer); if (sta) { qos = test_sta_flag(sta, WLAN_STA_WME); } else { diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 3456c0486b48..70b5a05c0a4e 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1120,7 +1120,8 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, tx->sta = rcu_dereference(sdata->u.vlan.sta); if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr) return TX_DROP; - } else if (info->flags & IEEE80211_TX_CTL_INJECTED || + } else if (info->flags & (IEEE80211_TX_CTL_INJECTED | + IEEE80211_TX_INTFL_NL80211_FRAME_TX) || tx->sdata->control_port_protocol == tx->skb->protocol) { tx->sta = sta_info_get_bss(sdata, hdr->addr1); } -- cgit v1.2.2 From 0c5b93290b2f3c7a376567c03ae8d385b0e99851 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 29 Sep 2013 21:39:34 +0200 Subject: mac80211: update sta->last_rx on acked tx frames When clients are idle for too long, hostapd sends nullfunc frames for probing. When those are acked by the client, the idle time needs to be updated. To make this work (and to avoid unnecessary probing), update sta->last_rx whenever an ACK was received for a tx packet. Only do this if the flag IEEE80211_HW_REPORTS_TX_ACK_STATUS is set. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/status.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 368837fe3b80..78dc2e99027e 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -180,6 +180,9 @@ static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb) struct ieee80211_local *local = sta->local; struct ieee80211_sub_if_data *sdata = sta->sdata; + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + sta->last_rx = jiffies; + if (ieee80211_is_data_qos(mgmt->frame_control)) { struct ieee80211_hdr *hdr = (void *) skb->data; u8 *qc = ieee80211_get_qos_ctl(hdr); -- cgit v1.2.2 From 22c4ceed0184318ec5a6182c6d75d398452c2e39 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 30 Sep 2013 12:36:05 +0300 Subject: mac80211: Run deferred scan if last roc_list item is not started mac80211 scan processing could get stuck if roc work for pending, but not started when a scan request was deferred due to such roc item. Normally the deferred scan would be started from ieee80211_start_next_roc(), but ieee80211_sw_roc_work() calls that only if the finished ROC was started. Fix this by calling ieee80211_run_deferred_scan() in the case the last ROC was not actually started. This issue was hit relatively easily in P2P find operations where Listen state (remain-on-channel) and Search state (scan) are repeated in a loop. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/offchannel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index acd1f71adc03..0c2a29484c07 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -394,6 +394,8 @@ void ieee80211_sw_roc_work(struct work_struct *work) if (started) ieee80211_start_next_roc(local); + else if (list_empty(&local->roc_list)) + ieee80211_run_deferred_scan(local); } out_unlock: -- cgit v1.2.2 From dfb6b7c109a7f98d324a759599d1b4616f02c79f Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 23 Sep 2013 04:08:13 +0200 Subject: Revert "rt2x00pci: Use PCI MSIs whenever possible" This reverts commit 9483f40d8d01918b399b4e24d0c1111db0afffeb. Some devices stop to connect with above commit, see: https://bugzilla.kernel.org/show_bug.cgi?id=61621 Since there is no clear benefit of having MSI enabled, just revert change to fix the problem. Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Stanislaw Gruszka Acked-by: Jakub Kicinski Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00pci.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 76d95deb274b..dc49e525ae5e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -105,13 +105,11 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops) goto exit_release_regions; } - pci_enable_msi(pci_dev); - hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); if (!hw) { rt2x00_probe_err("Failed to allocate hardware\n"); retval = -ENOMEM; - goto exit_disable_msi; + goto exit_release_regions; } pci_set_drvdata(pci_dev, hw); @@ -152,9 +150,6 @@ exit_free_reg: exit_free_device: ieee80211_free_hw(hw); -exit_disable_msi: - pci_disable_msi(pci_dev); - exit_release_regions: pci_release_regions(pci_dev); @@ -179,8 +174,6 @@ void rt2x00pci_remove(struct pci_dev *pci_dev) rt2x00pci_free_reg(rt2x00dev); ieee80211_free_hw(hw); - pci_disable_msi(pci_dev); - /* * Free the PCI device data. */ -- cgit v1.2.2 From 453b0c3f6910672f79da354077af728d92f95c5b Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 27 Sep 2013 10:55:38 -0700 Subject: mwifiex: fix SDIO interrupt lost issue 601216e "mwifiex: process RX packets in SDIO IRQ thread directly" introduced a command timeout issue which can be reproduced easily on an AM33xx platform using a test application written by Daniel Mack: https://gist.github.com/zonque/6579314 mwifiex_main_process() is called from both the SDIO handler and the workqueue. In case an interrupt occurs right after the int_status check, but before updating the mwifiex_processing flag, this interrupt gets lost, resulting in a command timeout and consequently a card reset. Let main_proc_lock protect both int_status and mwifiex_processing flag. This fixes the interrupt lost issue. Cc: # 3.7+ Reported-by: Sven Neumann Reported-by: Andreas Fenkart Tested-by: Daniel Mack Reviewed-by: Dylan Reid Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Paul Stewart Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index fd778337deee..c2b91f566e05 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -358,10 +358,12 @@ process_start: } } while (true); - if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter)) + spin_lock_irqsave(&adapter->main_proc_lock, flags); + if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter)) { + spin_unlock_irqrestore(&adapter->main_proc_lock, flags); goto process_start; + } - spin_lock_irqsave(&adapter->main_proc_lock, flags); adapter->mwifiex_processing = false; spin_unlock_irqrestore(&adapter->main_proc_lock, flags); -- cgit v1.2.2 From f69727fd78fa761dc49ee3091c432a8c6ab81292 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 29 Sep 2013 13:06:31 +0200 Subject: ath9k: fix powersave response handling for BA session packets When a packet is passed from mac80211 to the driver with the IEEE80211_TX_CTL_PS_RESPONSE flag set, it bypasses the normal driver internal queueing and goes directly to the UAPSD queue. When that happens, packets that are part of a BlockAck session still need to be tracked as such inside the driver, otherwise it will create discrepancies in the receiver BA reorder window, causing traffic stalls. This only happens in AP mode with powersave-enabled clients. This patch fixes the regression introduced in the commit "ath9k: use software queues for un-aggregated data packets" Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 5ac713d2ff5d..dd30452df966 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1969,15 +1969,18 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq, static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq, struct ath_atx_tid *tid, struct sk_buff *skb) { + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ath_frame_info *fi = get_frame_info(skb); struct list_head bf_head; - struct ath_buf *bf; - - bf = fi->bf; + struct ath_buf *bf = fi->bf; INIT_LIST_HEAD(&bf_head); list_add_tail(&bf->list, &bf_head); bf->bf_state.bf_type = 0; + if (tid && (tx_info->flags & IEEE80211_TX_CTL_AMPDU)) { + bf->bf_state.bf_type = BUF_AMPDU; + ath_tx_addto_baw(sc, tid, bf); + } bf->bf_next = NULL; bf->bf_lastbf = bf; -- cgit v1.2.2 From 01ea748cd5bfb88e2d3eaf2ded0f047d37b11484 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Fri, 30 Aug 2013 11:12:05 +0300 Subject: iwlwifi: mvm: Disable uAPSD for D3 image The D3 firmware image doesn't support uAPSD, so disable it. Signed-off-by: Alexander Bondar Reviewed-by: Guy Cohen Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/power.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index 21407a353a3b..d58e393324ef 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -273,7 +273,10 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, if (!mvmvif->queue_params[ac].uapsd) continue; - cmd->flags |= cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK); + if (mvm->cur_ucode != IWL_UCODE_WOWLAN) + cmd->flags |= + cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK); + cmd->uapsd_ac_flags |= BIT(ac); /* QNDP TID - the highest TID with no admission control */ -- cgit v1.2.2 From f477252051c6cdbd1c8ba299fba8f8b98667ca31 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 24 Jul 2013 14:15:21 +0300 Subject: iwlwifi: pcie: don't reset the TX queue counter A few NICs can get into trouble if we reset the TX queue counters in certain very rare situation. To be on the safe side, simply avoid to reset the TX queue counter. This is relevant for non-AMPDU queues only since on AMPDU we have no choice - we must start the TX queue at the right index. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index f45eb29c2ede..1424335163b9 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1102,6 +1102,8 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo, * non-AGG queue. */ iwl_clear_bits_prph(trans, SCD_AGGR_SEL, BIT(txq_id)); + + ssn = trans_pcie->txq[txq_id].q.read_ptr; } /* Place first TFD at index corresponding to start sequence number. -- cgit v1.2.2 From b49926629fb5c324bb1ed3960fb0d7905a4a8562 Mon Sep 17 00:00:00 2001 From: Matti Gottlieb Date: Sun, 22 Sep 2013 08:23:23 +0300 Subject: iwlwifi: pcie: add new SKUs for 7000 & 3160 NIC series Add some new PCI IDs to the table for 7000 & 3160 series Cc: stable@vger.kernel.org Signed-off-by: Matti Gottlieb Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/drv.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index dc02cb9792af..349f46636885 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -260,54 +260,86 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { #if IS_ENABLED(CONFIG_IWLMVM) /* 7000 Series */ {IWL_PCI_DEVICE(0x08B1, 0x4070, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x4072, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4170, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4060, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x406A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4160, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4062, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4162, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0x4270, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0x4272, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0x4260, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0x426A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0x4262, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4470, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x4472, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4460, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x446A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4462, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4870, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x486E, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4A70, iwl7260_2ac_cfg_high_temp)}, {IWL_PCI_DEVICE(0x08B1, 0x4A6E, iwl7260_2ac_cfg_high_temp)}, {IWL_PCI_DEVICE(0x08B1, 0x4A6C, iwl7260_2ac_cfg_high_temp)}, + {IWL_PCI_DEVICE(0x08B1, 0x4570, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x4560, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0x4370, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0x4360, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x5070, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4020, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x402A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0x4220, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4420, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC070, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC072, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC170, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC060, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC06A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC160, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC062, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC162, iwl7260_n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC770, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC760, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0xC270, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0xC272, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0xC260, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0xC26A, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0xC262, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC470, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC472, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC460, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC462, iwl7260_n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC570, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC560, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0xC370, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC360, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC020, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC02A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0xC220, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC420, iwl7260_2n_cfg)}, /* 3160 Series */ {IWL_PCI_DEVICE(0x08B3, 0x0070, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x0072, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x0170, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x0172, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x0060, iwl3160_2n_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x0062, iwl3160_n_cfg)}, {IWL_PCI_DEVICE(0x08B4, 0x0270, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B4, 0x0272, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x0470, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x0472, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B4, 0x0370, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8070, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x8072, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8170, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x8172, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8060, iwl3160_2n_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8062, iwl3160_n_cfg)}, {IWL_PCI_DEVICE(0x08B4, 0x8270, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8470, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x8570, iwl3160_2ac_cfg)}, #endif /* CONFIG_IWLMVM */ {0} -- cgit v1.2.2 From 8ca95995e64f5d270889badb3e449dca91106a2b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 15 Sep 2013 11:37:17 +0300 Subject: iwlwifi: don't WARN on host commands sent when firmware is dead This triggers automatic bug reports and add no valuable information. Print a simple error instead and drop the host command. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-trans.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index dd57a36ecb10..80b47508647c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -601,8 +601,10 @@ static inline int iwl_trans_send_cmd(struct iwl_trans *trans, { int ret; - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); + if (trans->state != IWL_TRANS_FW_ALIVE) { + IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); + return -EIO; + } if (!(cmd->flags & CMD_ASYNC)) lock_map_acquire_read(&trans->sync_cmd_lockdep_map); -- cgit v1.2.2 From 08a5dd3842f2ac61c6d69661d2d96022df8ae359 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 24 Sep 2013 19:34:26 +0300 Subject: iwlwifi: pcie: add SKUs for 6000, 6005 and 6235 series Add some new PCI IDs to the table for 6000, 6005 and 6235 series. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-6000.c | 6 ++++++ drivers/net/wireless/iwlwifi/iwl-config.h | 1 + drivers/net/wireless/iwlwifi/pcie/drv.c | 10 ++++++++++ 3 files changed, 17 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 30d45e2fc193..8ac305be68f4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -240,6 +240,12 @@ const struct iwl_cfg iwl6035_2agn_cfg = { .ht_params = &iwl6000_ht_params, }; +const struct iwl_cfg iwl6035_2agn_sff_cfg = { + .name = "Intel(R) Centrino(R) Ultimate-N 6235 AGN", + IWL_DEVICE_6035, + .ht_params = &iwl6000_ht_params, +}; + const struct iwl_cfg iwl1030_bgn_cfg = { .name = "Intel(R) Centrino(R) Wireless-N 1030 BGN", IWL_DEVICE_6030, diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index e4d370bff306..b03c25e14903 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -280,6 +280,7 @@ extern const struct iwl_cfg iwl2000_2bgn_cfg; extern const struct iwl_cfg iwl2000_2bgn_d_cfg; extern const struct iwl_cfg iwl2030_2bgn_cfg; extern const struct iwl_cfg iwl6035_2agn_cfg; +extern const struct iwl_cfg iwl6035_2agn_sff_cfg; extern const struct iwl_cfg iwl105_bgn_cfg; extern const struct iwl_cfg iwl105_bgn_d_cfg; extern const struct iwl_cfg iwl135_bgn_cfg; diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 349f46636885..26108a1a29fa 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -139,13 +139,16 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 6x00 Series */ {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x422B, 0x1108, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x422B, 0x1128, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)}, {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x4238, 0x1118, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)}, {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)}, @@ -153,12 +156,16 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x0082, 0x1301, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1306, iwl6005_2abg_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1307, iwl6005_2bg_cfg)}, + {IWL_PCI_DEVICE(0x0082, 0x1308, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1321, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1326, iwl6005_2abg_cfg)}, + {IWL_PCI_DEVICE(0x0082, 0x1328, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0085, 0x1311, iwl6005_2agn_cfg)}, + {IWL_PCI_DEVICE(0x0085, 0x1318, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0085, 0x1316, iwl6005_2abg_cfg)}, {IWL_PCI_DEVICE(0x0082, 0xC020, iwl6005_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x0085, 0xC220, iwl6005_2agn_sff_cfg)}, + {IWL_PCI_DEVICE(0x0085, 0xC228, iwl6005_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x4820, iwl6005_2agn_d_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1304, iwl6005_2agn_mow1_cfg)},/* low 5GHz active */ {IWL_PCI_DEVICE(0x0082, 0x1305, iwl6005_2agn_mow2_cfg)},/* high 5GHz active */ @@ -240,8 +247,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 6x35 Series */ {IWL_PCI_DEVICE(0x088E, 0x4060, iwl6035_2agn_cfg)}, + {IWL_PCI_DEVICE(0x088E, 0x406A, iwl6035_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x088F, 0x4260, iwl6035_2agn_cfg)}, + {IWL_PCI_DEVICE(0x088F, 0x426A, iwl6035_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x088E, 0x4460, iwl6035_2agn_cfg)}, + {IWL_PCI_DEVICE(0x088E, 0x446A, iwl6035_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x088E, 0x4860, iwl6035_2agn_cfg)}, {IWL_PCI_DEVICE(0x088F, 0x5260, iwl6035_2agn_cfg)}, -- cgit v1.2.2 From 5a3e9f7f8c8768b5f7df81100c684e4cd00a6eb5 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 15 Sep 2013 14:39:02 +0300 Subject: iwlwifi: mvm: call ieee80211_scan_completed when needed When RFKill cuts short a scan, mac80211 cancels the scan. This is done by sending a host command to the firmware, but this command was dropped because of RFKill. Flag this command as "SEND_IN_RFKILL" to make sure it is sent to the firmware. The firmware will send SCAN_COMPLETE_NOTIFICATION which will trigger a call to ieee80211_scan_completed. If the scan cannot be aborted, it is because the firmware already finished the scan but we hadn't notified mac80211 at the time mac80211 decided to cancel the scan. By the time we see the scan could not be aborted, mac80211 has been notified already. This patch fixes situations in which we didn't notify mac80211 upon completion of the scan that was cut short by RFkill. Cc: stable@vger.kernel.org [3.10+] Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/scan.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 9a7ab8495300..621fb71f282a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -394,6 +394,11 @@ static bool iwl_mvm_scan_abort_notif(struct iwl_notif_wait_data *notif_wait, return false; } + /* + * If scan cannot be aborted, it means that we had a + * SCAN_COMPLETE_NOTIFICATION in the pipe and it called + * ieee80211_scan_completed already. + */ IWL_DEBUG_SCAN(mvm, "Scan cannot be aborted, exit now: %d\n", *resp); return true; @@ -417,14 +422,19 @@ void iwl_mvm_cancel_scan(struct iwl_mvm *mvm) SCAN_COMPLETE_NOTIFICATION }; int ret; + if (mvm->scan_status == IWL_MVM_SCAN_NONE) + return; + iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort, scan_abort_notif, ARRAY_SIZE(scan_abort_notif), iwl_mvm_scan_abort_notif, NULL); - ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, CMD_SYNC, 0, NULL); + ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, + CMD_SYNC | CMD_SEND_IN_RFKILL, 0, NULL); if (ret) { IWL_ERR(mvm, "Couldn't send SCAN_ABORT_CMD: %d\n", ret); + /* mac80211's state will be cleaned in the fw_restart flow */ goto out_remove_notif; } -- cgit v1.2.2 From 6c519bad7b19a2c14a075b400edabaa630330123 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Fri, 27 Sep 2013 18:03:39 +0200 Subject: batman-adv: set up network coding packet handlers during module init batman-adv saves its table of packet handlers as a global state, so handlers must be set up only once (and setting them up a second time will fail). The recently-added network coding support tries to set up its handler each time a new softif is registered, which obviously fails when more that one softif is used (and in consequence, the softif creation fails). Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called only once) and batadv_nc_mesh_init (which is called for each softif); in addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming consistent. Signed-off-by: Matthias Schiffer Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/main.c | 5 +++-- net/batman-adv/network-coding.c | 28 ++++++++++++++++++---------- net/batman-adv/network-coding.h | 14 ++++++++++---- 3 files changed, 31 insertions(+), 16 deletions(-) diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index c72d1bcdcf49..1356af660b5b 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -65,6 +65,7 @@ static int __init batadv_init(void) batadv_recv_handler_init(); batadv_iv_init(); + batadv_nc_init(); batadv_event_workqueue = create_singlethread_workqueue("bat_events"); @@ -142,7 +143,7 @@ int batadv_mesh_init(struct net_device *soft_iface) if (ret < 0) goto err; - ret = batadv_nc_init(bat_priv); + ret = batadv_nc_mesh_init(bat_priv); if (ret < 0) goto err; @@ -167,7 +168,7 @@ void batadv_mesh_free(struct net_device *soft_iface) batadv_vis_quit(bat_priv); batadv_gw_node_purge(bat_priv); - batadv_nc_free(bat_priv); + batadv_nc_mesh_free(bat_priv); batadv_dat_free(bat_priv); batadv_bla_free(bat_priv); diff --git a/net/batman-adv/network-coding.c b/net/batman-adv/network-coding.c index a487d46e0aec..4ecc0b6bf8ab 100644 --- a/net/batman-adv/network-coding.c +++ b/net/batman-adv/network-coding.c @@ -34,6 +34,20 @@ static void batadv_nc_worker(struct work_struct *work); static int batadv_nc_recv_coded_packet(struct sk_buff *skb, struct batadv_hard_iface *recv_if); +/** + * batadv_nc_init - one-time initialization for network coding + */ +int __init batadv_nc_init(void) +{ + int ret; + + /* Register our packet type */ + ret = batadv_recv_handler_register(BATADV_CODED, + batadv_nc_recv_coded_packet); + + return ret; +} + /** * batadv_nc_start_timer - initialise the nc periodic worker * @bat_priv: the bat priv with all the soft interface information @@ -45,10 +59,10 @@ static void batadv_nc_start_timer(struct batadv_priv *bat_priv) } /** - * batadv_nc_init - initialise coding hash table and start house keeping + * batadv_nc_mesh_init - initialise coding hash table and start house keeping * @bat_priv: the bat priv with all the soft interface information */ -int batadv_nc_init(struct batadv_priv *bat_priv) +int batadv_nc_mesh_init(struct batadv_priv *bat_priv) { bat_priv->nc.timestamp_fwd_flush = jiffies; bat_priv->nc.timestamp_sniffed_purge = jiffies; @@ -70,11 +84,6 @@ int batadv_nc_init(struct batadv_priv *bat_priv) batadv_hash_set_lock_class(bat_priv->nc.coding_hash, &batadv_nc_decoding_hash_lock_class_key); - /* Register our packet type */ - if (batadv_recv_handler_register(BATADV_CODED, - batadv_nc_recv_coded_packet) < 0) - goto err; - INIT_DELAYED_WORK(&bat_priv->nc.work, batadv_nc_worker); batadv_nc_start_timer(bat_priv); @@ -1721,12 +1730,11 @@ free_nc_packet: } /** - * batadv_nc_free - clean up network coding memory + * batadv_nc_mesh_free - clean up network coding memory * @bat_priv: the bat priv with all the soft interface information */ -void batadv_nc_free(struct batadv_priv *bat_priv) +void batadv_nc_mesh_free(struct batadv_priv *bat_priv) { - batadv_recv_handler_unregister(BATADV_CODED); cancel_delayed_work_sync(&bat_priv->nc.work); batadv_nc_purge_paths(bat_priv, bat_priv->nc.coding_hash, NULL); diff --git a/net/batman-adv/network-coding.h b/net/batman-adv/network-coding.h index 85a4ec81ad50..ddfa618e80bf 100644 --- a/net/batman-adv/network-coding.h +++ b/net/batman-adv/network-coding.h @@ -22,8 +22,9 @@ #ifdef CONFIG_BATMAN_ADV_NC -int batadv_nc_init(struct batadv_priv *bat_priv); -void batadv_nc_free(struct batadv_priv *bat_priv); +int batadv_nc_init(void); +int batadv_nc_mesh_init(struct batadv_priv *bat_priv); +void batadv_nc_mesh_free(struct batadv_priv *bat_priv); void batadv_nc_update_nc_node(struct batadv_priv *bat_priv, struct batadv_orig_node *orig_node, struct batadv_orig_node *orig_neigh_node, @@ -46,12 +47,17 @@ int batadv_nc_init_debugfs(struct batadv_priv *bat_priv); #else /* ifdef CONFIG_BATMAN_ADV_NC */ -static inline int batadv_nc_init(struct batadv_priv *bat_priv) +static inline int batadv_nc_init(void) { return 0; } -static inline void batadv_nc_free(struct batadv_priv *bat_priv) +static inline int batadv_nc_mesh_init(struct batadv_priv *bat_priv) +{ + return 0; +} + +static inline void batadv_nc_mesh_free(struct batadv_priv *bat_priv) { return; } -- cgit v1.2.2 From e727ca82e0e9616ab4844301e6bae60ca7327682 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 30 Sep 2013 22:03:06 +0200 Subject: proc connector: fix info leaks Initialize event_data for all possible message types to prevent leaking kernel stack contents to userland (up to 20 bytes). Also set the flags member of the connector message to 0 to prevent leaking two more stack bytes this way. Cc: stable@vger.kernel.org # v2.6.15+ Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- drivers/connector/cn_proc.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index 08ae128cce9b..c73fc2b74de2 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -65,6 +65,7 @@ void proc_fork_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -80,6 +81,7 @@ void proc_fork_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ /* If cn_netlink_send() failed, the data is not sent */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -96,6 +98,7 @@ void proc_exec_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -106,6 +109,7 @@ void proc_exec_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -122,6 +126,7 @@ void proc_id_connector(struct task_struct *task, int which_id) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); ev->what = which_id; ev->event_data.id.process_pid = task->pid; ev->event_data.id.process_tgid = task->tgid; @@ -145,6 +150,7 @@ void proc_id_connector(struct task_struct *task, int which_id) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -160,6 +166,7 @@ void proc_sid_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -170,6 +177,7 @@ void proc_sid_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -185,6 +193,7 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -203,6 +212,7 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -218,6 +228,7 @@ void proc_comm_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -229,6 +240,7 @@ void proc_comm_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -244,6 +256,7 @@ void proc_coredump_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -254,6 +267,7 @@ void proc_coredump_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -269,6 +283,7 @@ void proc_exit_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -281,6 +296,7 @@ void proc_exit_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -304,6 +320,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); msg->seq = rcvd_seq; ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -313,6 +330,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = rcvd_ack + 1; msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } -- cgit v1.2.2 From 162b2bedc084d2d908a04c93383ba02348b648b0 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 30 Sep 2013 22:03:07 +0200 Subject: connector: use nlmsg_len() to check message length The current code tests the length of the whole netlink message to be at least as long to fit a cn_msg. This is wrong as nlmsg_len includes the length of the netlink message header. Use nlmsg_len() instead to fix this "off-by-NLMSG_HDRLEN" size check. Cc: stable@vger.kernel.org # v2.6.14+ Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- drivers/connector/connector.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 6ecfa758942c..0daa11e418b1 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -157,17 +157,18 @@ static int cn_call_callback(struct sk_buff *skb) static void cn_rx_skb(struct sk_buff *__skb) { struct nlmsghdr *nlh; - int err; struct sk_buff *skb; + int len, err; skb = skb_get(__skb); if (skb->len >= NLMSG_HDRLEN) { nlh = nlmsg_hdr(skb); + len = nlmsg_len(nlh); - if (nlh->nlmsg_len < sizeof(struct cn_msg) || + if (len < (int)sizeof(struct cn_msg) || skb->len < nlh->nlmsg_len || - nlh->nlmsg_len > CONNECTOR_MAX_MSG_SIZE) { + len > CONNECTOR_MAX_MSG_SIZE) { kfree_skb(skb); return; } -- cgit v1.2.2 From ac73bf50b709dea4e39635151b861b8a8f52bfbb Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 30 Sep 2013 22:03:08 +0200 Subject: connector: use 'size' everywhere in cn_netlink_send() We calculated the size for the netlink message buffer as size. Use size in the memcpy() call as well instead of recalculating it. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- drivers/connector/connector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 0daa11e418b1..a36749f1e44a 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -109,7 +109,7 @@ int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask) data = nlmsg_data(nlh); - memcpy(data, msg, sizeof(*data) + msg->len); + memcpy(data, msg, size); NETLINK_CB(skb).dst_group = group; -- cgit v1.2.2 From 05742faf2512b94907f49b21581ed4667b9bd702 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 30 Sep 2013 22:03:09 +0200 Subject: connector - documentation: simplify netlink message length assignment Use the precalculated size instead of obfuscating the message length calculation by first subtracting the netlink header length from size and then use the NLMSG_LENGTH() macro to add it back again. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- Documentation/connector/ucon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c index 4848db8c71ff..8a4da64e02a8 100644 --- a/Documentation/connector/ucon.c +++ b/Documentation/connector/ucon.c @@ -71,7 +71,7 @@ static int netlink_send(int s, struct cn_msg *msg) nlh->nlmsg_seq = seq++; nlh->nlmsg_pid = getpid(); nlh->nlmsg_type = NLMSG_DONE; - nlh->nlmsg_len = NLMSG_LENGTH(size - sizeof(*nlh)); + nlh->nlmsg_len = size; nlh->nlmsg_flags = 0; m = NLMSG_DATA(nlh); -- cgit v1.2.2 From 6865d1e834be84ddd5808d93d5035b492346c64a Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 30 Sep 2013 22:05:40 +0200 Subject: unix_diag: fix info leak When filling the netlink message we miss to wipe the pad field, therefore leak one byte of heap memory to userland. Fix this by setting pad to 0. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/unix/diag.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/unix/diag.c b/net/unix/diag.c index d591091603bf..86fa0f3b2caf 100644 --- a/net/unix/diag.c +++ b/net/unix/diag.c @@ -124,6 +124,7 @@ static int sk_diag_fill(struct sock *sk, struct sk_buff *skb, struct unix_diag_r rep->udiag_family = AF_UNIX; rep->udiag_type = sk->sk_type; rep->udiag_state = sk->sk_state; + rep->pad = 0; rep->udiag_ino = sk_ino; sock_diag_save_cookie(sk, rep->udiag_cookie); -- cgit v1.2.2 From 8c1c58ec70ce45cd5c7866811e90df131e7a3005 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 30 Sep 2013 15:12:15 -0500 Subject: net: calxedaxgmac: fix clearing of old filter addresses In commit 2ee68f621af280 (net: calxedaxgmac: fix various errors in xgmac_set_rx_mode), a fix to clean-up old address entries was added. However, the loop to zero out the entries failed to increment the register address resulting in only 1 entry getting cleared. Fix this to correctly use the loop index. Also, the end of the loop condition was off by 1 and should have been <= rather than <. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 78d6d6b970e1..94358d234e73 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1342,8 +1342,8 @@ static void xgmac_set_rx_mode(struct net_device *dev) } out: - for (i = reg; i < XGMAC_MAX_FILTER_ADDR; i++) - xgmac_set_mac_addr(ioaddr, NULL, reg); + for (i = reg; i <= XGMAC_MAX_FILTER_ADDR; i++) + xgmac_set_mac_addr(ioaddr, NULL, i); for (i = 0; i < XGMAC_NUM_HASH; i++) writel(hash_filter[i], ioaddr + XGMAC_HASH(i)); -- cgit v1.2.2 From 8a8c3f5bebe2455200cd488aea8546d01645b06b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 30 Sep 2013 15:12:16 -0500 Subject: net: calxedaxgmac: add uc and mc filter addresses in promiscuous mode Even in promiscuous mode, we need to add filter addresses for correct operation. This fixes silent failures when using a bridge and adding addresses using the "bridge fdb add" command. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 94358d234e73..35da09b80c7c 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1291,10 +1291,8 @@ static void xgmac_set_rx_mode(struct net_device *dev) netdev_dbg(priv->dev, "# mcasts %d, # unicast %d\n", netdev_mc_count(dev), netdev_uc_count(dev)); - if (dev->flags & IFF_PROMISC) { - writel(XGMAC_FRAME_FILTER_PR, ioaddr + XGMAC_FRAME_FILTER); - return; - } + if (dev->flags & IFF_PROMISC) + value |= XGMAC_FRAME_FILTER_PR; memset(hash_filter, 0, sizeof(hash_filter)); -- cgit v1.2.2 From 0cf2f380073867e5d0cfb526fdf9bee0e7f8a9c6 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 30 Sep 2013 15:12:17 -0500 Subject: net: calxedaxgmac: determine number of address filters at runtime Highbank and Midway xgmac h/w have different number of MAC address filter registers with 7 and 31, respectively. Highbank has been wrong, so fix it and detect the number of filter registers at run-time. Unfortunately, the version register is the same on both SOCs, so simply test if write to the last filter register will take a value. It always reads as 0 if not. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 35da09b80c7c..48f52882a22b 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -106,7 +106,6 @@ #define XGMAC_DMA_HW_FEATURE 0x00000f58 /* Enabled Hardware Features */ #define XGMAC_ADDR_AE 0x80000000 -#define XGMAC_MAX_FILTER_ADDR 31 /* PMT Control and Status */ #define XGMAC_PMT_POINTER_RESET 0x80000000 @@ -384,6 +383,7 @@ struct xgmac_priv { struct device *device; struct napi_struct napi; + int max_macs; struct xgmac_extra_stats xstats; spinlock_t stats_lock; @@ -1296,7 +1296,7 @@ static void xgmac_set_rx_mode(struct net_device *dev) memset(hash_filter, 0, sizeof(hash_filter)); - if (netdev_uc_count(dev) > XGMAC_MAX_FILTER_ADDR) { + if (netdev_uc_count(dev) > priv->max_macs) { use_hash = true; value |= XGMAC_FRAME_FILTER_HUC | XGMAC_FRAME_FILTER_HPF; } @@ -1319,7 +1319,7 @@ static void xgmac_set_rx_mode(struct net_device *dev) goto out; } - if ((netdev_mc_count(dev) + reg - 1) > XGMAC_MAX_FILTER_ADDR) { + if ((netdev_mc_count(dev) + reg - 1) > priv->max_macs) { use_hash = true; value |= XGMAC_FRAME_FILTER_HMC | XGMAC_FRAME_FILTER_HPF; } else { @@ -1340,7 +1340,7 @@ static void xgmac_set_rx_mode(struct net_device *dev) } out: - for (i = reg; i <= XGMAC_MAX_FILTER_ADDR; i++) + for (i = reg; i <= priv->max_macs; i++) xgmac_set_mac_addr(ioaddr, NULL, i); for (i = 0; i < XGMAC_NUM_HASH; i++) writel(hash_filter[i], ioaddr + XGMAC_HASH(i)); @@ -1759,6 +1759,13 @@ static int xgmac_probe(struct platform_device *pdev) uid = readl(priv->base + XGMAC_VERSION); netdev_info(ndev, "h/w version is 0x%x\n", uid); + /* Figure out how many valid mac address filter registers we have */ + writel(1, priv->base + XGMAC_ADDR_HIGH(31)); + if (readl(priv->base + XGMAC_ADDR_HIGH(31)) == 1) + priv->max_macs = 31; + else + priv->max_macs = 7; + writel(0, priv->base + XGMAC_DMA_INTR_ENA); ndev->irq = platform_get_irq(pdev, 0); if (ndev->irq == -ENXIO) { -- cgit v1.2.2 From 58e4e1f6cacddb7823c44bcfb272174553f6c645 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 30 Sep 2013 13:29:08 -0700 Subject: igb: Avoid uninitialized advertised variable in eee_set_cur eee_get_cur assumes that the output data is already zeroed. It can read-modify-write the advertised field: if (ipcnfg & E1000_IPCNFG_EEE_100M_AN) 2594 edata->advertised |= ADVERTISED_100baseT_Full; This is ok for the normal ethtool eee_get call, which always zeroes the input data before. But eee_set_cur also calls eee_get_cur and it did not zero the input field. Later on it then compares agsinst the field, which can contain partial stack garbage. Zero the input field in eee_set_cur() too. Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen Acked-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 86d51429a189..151e00cad113 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -2655,6 +2655,8 @@ static int igb_set_eee(struct net_device *netdev, (hw->phy.media_type != e1000_media_type_copper)) return -EOPNOTSUPP; + memset(&eee_curr, 0, sizeof(struct ethtool_eee)); + ret_val = igb_get_eee(netdev, &eee_curr); if (ret_val) return ret_val; -- cgit v1.2.2 From 5843ef421311c34f06d5ab82bced5aebfe185b2c Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 30 Sep 2013 13:29:11 -0700 Subject: tcp: Always set options to 0 before calling tcp_established_options tcp_established_options assumes opts->options is 0 before calling, as it read modify writes it. For the tcp_current_mss() case the opts structure is not zeroed, so this can be done with uninitialized values. This is ok, because ->options is not read in this path. But it's still better to avoid the operation on the uninitialized field. This shuts up a static code analyzer, and presumably may help the optimizer. Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index e6bb8256e59f..c6f01f2cdb32 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -637,6 +637,8 @@ static unsigned int tcp_established_options(struct sock *sk, struct sk_buff *skb unsigned int size = 0; unsigned int eff_sacks; + opts->options = 0; + #ifdef CONFIG_TCP_MD5SIG *md5 = tp->af_specific->md5_lookup(sk, sk); if (unlikely(*md5)) { -- cgit v1.2.2 From 5bc3db5c9ca8407f52918b6504d3b27230defedc Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 30 Sep 2013 21:30:22 -0700 Subject: tc: export tc_defact.h to userspace Jamal sent patch to add tc user simple actions to iproute2 but required header was not being exported. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/tc_act/tc_defact.h | 19 ------------------- include/uapi/linux/tc_act/Kbuild | 1 + include/uapi/linux/tc_act/tc_defact.h | 19 +++++++++++++++++++ 3 files changed, 20 insertions(+), 19 deletions(-) delete mode 100644 include/linux/tc_act/tc_defact.h create mode 100644 include/uapi/linux/tc_act/tc_defact.h diff --git a/include/linux/tc_act/tc_defact.h b/include/linux/tc_act/tc_defact.h deleted file mode 100644 index 6f65d07c7ce2..000000000000 --- a/include/linux/tc_act/tc_defact.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __LINUX_TC_DEF_H -#define __LINUX_TC_DEF_H - -#include - -struct tc_defact { - tc_gen; -}; - -enum { - TCA_DEF_UNSPEC, - TCA_DEF_TM, - TCA_DEF_PARMS, - TCA_DEF_DATA, - __TCA_DEF_MAX -}; -#define TCA_DEF_MAX (__TCA_DEF_MAX - 1) - -#endif diff --git a/include/uapi/linux/tc_act/Kbuild b/include/uapi/linux/tc_act/Kbuild index 0623ec4e728f..56f121605c99 100644 --- a/include/uapi/linux/tc_act/Kbuild +++ b/include/uapi/linux/tc_act/Kbuild @@ -1,5 +1,6 @@ # UAPI Header export list header-y += tc_csum.h +header-y += tc_defact.h header-y += tc_gact.h header-y += tc_ipt.h header-y += tc_mirred.h diff --git a/include/uapi/linux/tc_act/tc_defact.h b/include/uapi/linux/tc_act/tc_defact.h new file mode 100644 index 000000000000..17dddb40f740 --- /dev/null +++ b/include/uapi/linux/tc_act/tc_defact.h @@ -0,0 +1,19 @@ +#ifndef __LINUX_TC_DEF_H +#define __LINUX_TC_DEF_H + +#include + +struct tc_defact { + tc_gen; +}; + +enum { + TCA_DEF_UNSPEC, + TCA_DEF_TM, + TCA_DEF_PARMS, + TCA_DEF_DATA, + __TCA_DEF_MAX +}; +#define TCA_DEF_MAX (__TCA_DEF_MAX - 1) + +#endif -- cgit v1.2.2 From 28ad7b06f4a7670d5794d3751f5c68a7e5e437a8 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Tue, 1 Oct 2013 21:23:25 -0400 Subject: bonding: update MAINTAINERS Veaceslav has been doing a significant amount of work on bonding lately and reached out to me about being a maintainer. After discussing this with him, I think he would be a good fit as a bonding maintainer. Signed-off-by: Andy Gospodarek Acked-by: Veaceslav Falico Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 744a23954a34..43dfc821c584 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1785,6 +1785,7 @@ F: include/net/bluetooth/ BONDING DRIVER M: Jay Vosburgh +M: Veaceslav Falico M: Andy Gospodarek L: netdev@vger.kernel.org W: http://sourceforge.net/projects/bonding/ -- cgit v1.2.2 From 80ad1d61e72d626e30ebe8529a0455e660ca4693 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 1 Oct 2013 21:04:11 -0700 Subject: net: do not call sock_put() on TIMEWAIT sockets commit 3ab5aee7fe84 ("net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls") incorrectly used sock_put() on TIMEWAIT sockets. We should instead use inet_twsk_put() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/inet_hashtables.c | 2 +- net/ipv6/inet6_hashtables.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 7bd8983dbfcf..96da9c77deca 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -287,7 +287,7 @@ begintw: if (unlikely(!INET_TW_MATCH(sk, net, acookie, saddr, daddr, ports, dif))) { - sock_put(sk); + inet_twsk_put(inet_twsk(sk)); goto begintw; } goto out; diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index 32b4a1675d82..066640e0ba8e 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -116,7 +116,7 @@ begintw: } if (unlikely(!INET6_TW_MATCH(sk, net, saddr, daddr, ports, dif))) { - sock_put(sk); + inet_twsk_put(inet_twsk(sk)); goto begintw; } goto out; -- cgit v1.2.2 From e18503f41f9b12132c95d7c31ca6ee5155e44e5c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fran=C3=A7ois=20Cachereul?= Date: Wed, 2 Oct 2013 10:16:02 +0200 Subject: l2tp: fix kernel panic when using IPv4-mapped IPv6 addresses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit IPv4 mapped addresses cause kernel panic. The patch juste check whether the IPv6 address is an IPv4 mapped address. If so, use IPv4 API instead of IPv6. [ 940.026915] general protection fault: 0000 [#1] [ 940.026915] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core pppox ppp_generic slhc loop psmouse [ 940.026915] CPU: 0 PID: 3184 Comm: memcheck-amd64- Not tainted 3.11.0+ #1 [ 940.026915] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 940.026915] task: ffff880007130e20 ti: ffff88000737e000 task.ti: ffff88000737e000 [ 940.026915] RIP: 0010:[] [] ip6_xmit+0x276/0x326 [ 940.026915] RSP: 0018:ffff88000737fd28 EFLAGS: 00010286 [ 940.026915] RAX: c748521a75ceff48 RBX: ffff880000c30800 RCX: 0000000000000000 [ 940.026915] RDX: ffff88000075cc4e RSI: 0000000000000028 RDI: ffff8800060e5a40 [ 940.026915] RBP: ffff8800060e5a40 R08: 0000000000000000 R09: ffff88000075cc90 [ 940.026915] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88000737fda0 [ 940.026915] R13: 0000000000000000 R14: 0000000000002000 R15: ffff880005d3b580 [ 940.026915] FS: 00007f163dc5e800(0000) GS:ffffffff81623000(0000) knlGS:0000000000000000 [ 940.026915] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 940.026915] CR2: 00000004032dc940 CR3: 0000000005c25000 CR4: 00000000000006f0 [ 940.026915] Stack: [ 940.026915] ffff88000075cc4e ffffffff81694e90 ffff880000c30b38 0000000000000020 [ 940.026915] 11000000523c4bac ffff88000737fdb4 0000000000000000 ffff880000c30800 [ 940.026915] ffff880005d3b580 ffff880000c30b38 ffff8800060e5a40 0000000000000020 [ 940.026915] Call Trace: [ 940.026915] [] ? inet6_csk_xmit+0xa4/0xc4 [ 940.026915] [] ? l2tp_xmit_skb+0x503/0x55a [l2tp_core] [ 940.026915] [] ? pskb_expand_head+0x161/0x214 [ 940.026915] [] ? pppol2tp_xmit+0xf2/0x143 [l2tp_ppp] [ 940.026915] [] ? ppp_channel_push+0x36/0x8b [ppp_generic] [ 940.026915] [] ? ppp_write+0xaf/0xc5 [ppp_generic] [ 940.026915] [] ? vfs_write+0xa2/0x106 [ 940.026915] [] ? SyS_write+0x56/0x8a [ 940.026915] [] ? system_call_fastpath+0x16/0x1b [ 940.026915] Code: 00 49 8b 8f d8 00 00 00 66 83 7c 11 02 00 74 60 49 8b 47 58 48 83 e0 fe 48 8b 80 18 01 00 00 48 85 c0 74 13 48 8b 80 78 02 00 00 <48> ff 40 28 41 8b 57 68 48 01 50 30 48 8b 54 24 08 49 c7 c1 51 [ 940.026915] RIP [] ip6_xmit+0x276/0x326 [ 940.026915] RSP [ 940.057945] ---[ end trace be8aba9a61c8b7f3 ]--- [ 940.058583] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: François CACHEREUL Signed-off-by: David S. Miller --- net/l2tp/l2tp_core.c | 27 +++++++++++++++++++++++---- net/l2tp/l2tp_core.h | 3 +++ 2 files changed, 26 insertions(+), 4 deletions(-) diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index feae495a0a30..aedaa2cd4237 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -496,6 +496,7 @@ out: static inline int l2tp_verify_udp_checksum(struct sock *sk, struct sk_buff *skb) { + struct l2tp_tunnel *tunnel = (struct l2tp_tunnel *)sk->sk_user_data; struct udphdr *uh = udp_hdr(skb); u16 ulen = ntohs(uh->len); __wsum psum; @@ -504,7 +505,7 @@ static inline int l2tp_verify_udp_checksum(struct sock *sk, return 0; #if IS_ENABLED(CONFIG_IPV6) - if (sk->sk_family == PF_INET6) { + if (sk->sk_family == PF_INET6 && !tunnel->v4mapped) { if (!uh->check) { LIMIT_NETDEBUG(KERN_INFO "L2TP: IPv6: checksum is 0\n"); return 1; @@ -1128,7 +1129,7 @@ static int l2tp_xmit_core(struct l2tp_session *session, struct sk_buff *skb, /* Queue the packet to IP for output */ skb->local_df = 1; #if IS_ENABLED(CONFIG_IPV6) - if (skb->sk->sk_family == PF_INET6) + if (skb->sk->sk_family == PF_INET6 && !tunnel->v4mapped) error = inet6_csk_xmit(skb, NULL); else #endif @@ -1255,7 +1256,7 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len /* Calculate UDP checksum if configured to do so */ #if IS_ENABLED(CONFIG_IPV6) - if (sk->sk_family == PF_INET6) + if (sk->sk_family == PF_INET6 && !tunnel->v4mapped) l2tp_xmit_ipv6_csum(sk, skb, udp_len); else #endif @@ -1704,6 +1705,24 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 if (cfg != NULL) tunnel->debug = cfg->debug; +#if IS_ENABLED(CONFIG_IPV6) + if (sk->sk_family == PF_INET6) { + struct ipv6_pinfo *np = inet6_sk(sk); + + if (ipv6_addr_v4mapped(&np->saddr) && + ipv6_addr_v4mapped(&np->daddr)) { + struct inet_sock *inet = inet_sk(sk); + + tunnel->v4mapped = true; + inet->inet_saddr = np->saddr.s6_addr32[3]; + inet->inet_rcv_saddr = np->rcv_saddr.s6_addr32[3]; + inet->inet_daddr = np->daddr.s6_addr32[3]; + } else { + tunnel->v4mapped = false; + } + } +#endif + /* Mark socket as an encapsulation socket. See net/ipv4/udp.c */ tunnel->encap = encap; if (encap == L2TP_ENCAPTYPE_UDP) { @@ -1712,7 +1731,7 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 udp_sk(sk)->encap_rcv = l2tp_udp_encap_recv; udp_sk(sk)->encap_destroy = l2tp_udp_encap_destroy; #if IS_ENABLED(CONFIG_IPV6) - if (sk->sk_family == PF_INET6) + if (sk->sk_family == PF_INET6 && !tunnel->v4mapped) udpv6_encap_enable(); else #endif diff --git a/net/l2tp/l2tp_core.h b/net/l2tp/l2tp_core.h index 66a559b104b6..6f251cbc2ed7 100644 --- a/net/l2tp/l2tp_core.h +++ b/net/l2tp/l2tp_core.h @@ -194,6 +194,9 @@ struct l2tp_tunnel { struct sock *sock; /* Parent socket */ int fd; /* Parent fd, if tunnel socket * was created by userspace */ +#if IS_ENABLED(CONFIG_IPV6) + bool v4mapped; +#endif struct work_struct del_work; -- cgit v1.2.2 From 041b4ddb84989f06ff1df0ca869b950f1ee3cb1c Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 2 Oct 2013 12:57:20 +0200 Subject: net: mv643xx_eth: update statistics timer from timer context only Each port driver installs a periodic timer to update port statistics by calling mib_counters_update. As mib_counters_update is also called from non-timer context, we should not reschedule the timer there but rather move it to timer-only context. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 7fb5677451f9..44a87e4469e0 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -1131,15 +1131,13 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->rx_discard += rdlp(mp, RX_DISCARD_FRAME_CNT); p->rx_overrun += rdlp(mp, RX_OVERRUN_FRAME_CNT); spin_unlock_bh(&mp->mib_counters_lock); - - mod_timer(&mp->mib_counters_timer, jiffies + 30 * HZ); } static void mib_counters_timer_wrapper(unsigned long _mp) { struct mv643xx_eth_private *mp = (void *)_mp; - mib_counters_update(mp); + mod_timer(&mp->mib_counters_timer, jiffies + 30 * HZ); } -- cgit v1.2.2 From f564412c935111c583b787bcc18157377b208e2e Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 2 Oct 2013 12:57:21 +0200 Subject: net: mv643xx_eth: fix orphaned statistics timer crash The periodic statistics timer gets started at port _probe() time, but is stopped on _stop() only. In a modular environment, this can cause the timer to access already deallocated memory, if the module is unloaded without starting the eth device. To fix this, we add the timer right before the port is started, instead of at _probe() time. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 44a87e4469e0..2364707d6a13 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2235,6 +2235,7 @@ static int mv643xx_eth_open(struct net_device *dev) mp->int_mask |= INT_TX_END_0 << i; } + add_timer(&mp->mib_counters_timer); port_start(mp); wrlp(mp, INT_MASK_EXT, INT_EXT_LINK_PHY | INT_EXT_TX); @@ -2914,7 +2915,6 @@ static int mv643xx_eth_probe(struct platform_device *pdev) mp->mib_counters_timer.data = (unsigned long)mp; mp->mib_counters_timer.function = mib_counters_timer_wrapper; mp->mib_counters_timer.expires = jiffies + 30 * HZ; - add_timer(&mp->mib_counters_timer); spin_lock_init(&mp->mib_counters_lock); -- cgit v1.2.2 From b5d82db83c1d0b327b599508a0830d25cc1f15db Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 2 Oct 2013 12:57:22 +0200 Subject: net: mv643xx_eth: fix missing device_node for port devices DT-based mv643xx_eth probes and creates platform_devices for the port devices on its own. To allow fixups for ports based on the device_node, we need to set .of_node of the corresponding device with the correct node. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 2364707d6a13..2c210ec35d59 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2533,6 +2533,7 @@ static int mv643xx_eth_shared_of_add_port(struct platform_device *pdev, if (!ppdev) return -ENOMEM; ppdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ppdev->dev.of_node = pnp; ret = platform_device_add_resources(ppdev, &res, 1); if (ret) -- cgit v1.2.2 From 1661bf364ae9c506bc8795fef70d1532931be1e8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 3 Oct 2013 00:27:20 +0300 Subject: net: heap overflow in __audit_sockaddr() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to cap ->msg_namelen or it leads to a buffer overflow when we to the memcpy() in __audit_sockaddr(). It requires CAP_AUDIT_CONTROL to exploit this bug. The call tree is: ___sys_recvmsg() move_addr_to_user() audit_sockaddr() __audit_sockaddr() Reported-by: Jüri Aedla Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- net/compat.c | 2 ++ net/socket.c | 24 ++++++++++++++++++++---- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/net/compat.c b/net/compat.c index f0a1ba6c8086..89032580bd1d 100644 --- a/net/compat.c +++ b/net/compat.c @@ -71,6 +71,8 @@ int get_compat_msghdr(struct msghdr *kmsg, struct compat_msghdr __user *umsg) __get_user(kmsg->msg_controllen, &umsg->msg_controllen) || __get_user(kmsg->msg_flags, &umsg->msg_flags)) return -EFAULT; + if (kmsg->msg_namelen > sizeof(struct sockaddr_storage)) + return -EINVAL; kmsg->msg_name = compat_ptr(tmp1); kmsg->msg_iov = compat_ptr(tmp2); kmsg->msg_control = compat_ptr(tmp3); diff --git a/net/socket.c b/net/socket.c index ebed4b68f768..c226aceee65b 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1964,6 +1964,16 @@ struct used_address { unsigned int name_len; }; +static int copy_msghdr_from_user(struct msghdr *kmsg, + struct msghdr __user *umsg) +{ + if (copy_from_user(kmsg, umsg, sizeof(struct msghdr))) + return -EFAULT; + if (kmsg->msg_namelen > sizeof(struct sockaddr_storage)) + return -EINVAL; + return 0; +} + static int ___sys_sendmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, struct used_address *used_address) @@ -1982,8 +1992,11 @@ static int ___sys_sendmsg(struct socket *sock, struct msghdr __user *msg, if (MSG_CMSG_COMPAT & flags) { if (get_compat_msghdr(msg_sys, msg_compat)) return -EFAULT; - } else if (copy_from_user(msg_sys, msg, sizeof(struct msghdr))) - return -EFAULT; + } else { + err = copy_msghdr_from_user(msg_sys, msg); + if (err) + return err; + } if (msg_sys->msg_iovlen > UIO_FASTIOV) { err = -EMSGSIZE; @@ -2191,8 +2204,11 @@ static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg, if (MSG_CMSG_COMPAT & flags) { if (get_compat_msghdr(msg_sys, msg_compat)) return -EFAULT; - } else if (copy_from_user(msg_sys, msg, sizeof(struct msghdr))) - return -EFAULT; + } else { + err = copy_msghdr_from_user(msg_sys, msg); + if (err) + return err; + } if (msg_sys->msg_iovlen > UIO_FASTIOV) { err = -EMSGSIZE; -- cgit v1.2.2 From 5e8a402f831dbe7ee831340a91439e46f0d38acd Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 4 Oct 2013 10:31:41 -0700 Subject: tcp: do not forget FIN in tcp_shifted_skb() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Yuchung found following problem : There are bugs in the SACK processing code, merging part in tcp_shift_skb_data(), that incorrectly resets or ignores the sacked skbs FIN flag. When a receiver first SACK the FIN sequence, and later throw away ofo queue (e.g., sack-reneging), the sender will stop retransmitting the FIN flag, and hangs forever. Following packetdrill test can be used to reproduce the bug. $ cat sack-merge-bug.pkt `sysctl -q net.ipv4.tcp_fack=0` // Establish a connection and send 10 MSS. 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +.000 bind(3, ..., ...) = 0 +.000 listen(3, 1) = 0 +.050 < S 0:0(0) win 32792 +.000 > S. 0:0(0) ack 1 +.001 < . 1:1(0) ack 1 win 1024 +.000 accept(3, ..., ...) = 4 +.100 write(4, ..., 12000) = 12000 +.000 shutdown(4, SHUT_WR) = 0 +.000 > . 1:10001(10000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 +.000 > FP. 10001:12001(2000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 +.050 < . 1:1(0) ack 2001 win 257 // SACK reneg +.050 < . 1:1(0) ack 12001 win 257 +0 %{ print "unacked: ",tcpi_unacked }% +5 %{ print "" }% First, a typo inverted left/right of one OR operation, then code forgot to advance end_seq if the merged skb carried FIN. Bug was added in 2.6.29 by commit 832d11c5cd076ab ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Cc: Ilpo Järvinen Acked-by: Ilpo Järvinen Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 25a89eaa669d..113dc5f17d47 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1284,7 +1284,10 @@ static bool tcp_shifted_skb(struct sock *sk, struct sk_buff *skb, tp->lost_cnt_hint -= tcp_skb_pcount(prev); } - TCP_SKB_CB(skb)->tcp_flags |= TCP_SKB_CB(prev)->tcp_flags; + TCP_SKB_CB(prev)->tcp_flags |= TCP_SKB_CB(skb)->tcp_flags; + if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN) + TCP_SKB_CB(prev)->end_seq++; + if (skb == tcp_highest_sack(sk)) tcp_advance_highest_sack(sk, skb); -- cgit v1.2.2 From d546a89362dcc35bc1aacf0e8e3b0da5a7d2dc89 Mon Sep 17 00:00:00 2001 From: Jon Cooper Date: Fri, 27 Sep 2013 18:26:30 +0100 Subject: sfc: Add rmb() between reading stats and generation count to ensure consistency Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/ef10.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 9f18ae984f9e..a4fbb383ac63 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -545,6 +545,7 @@ static int efx_ef10_try_update_nic_stats(struct efx_nic *efx) rmb(); efx_nic_update_stats(efx_ef10_stat_desc, EF10_STAT_COUNT, stats_mask, stats, efx->stats_buffer.addr, false); + rmb(); generation_start = dma_stats[MC_CMD_MAC_GENERATION_START]; if (generation_end != generation_start) return -EAGAIN; -- cgit v1.2.2 From 87648cc925222f16c3bd119af8ae8e8fb2f3fe1d Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Wed, 25 Sep 2013 17:34:12 +0100 Subject: sfc: Fix internal indices of ethtool stats for EF10 The indices in nic_data->stats need to match the EF10_STAT_whatever enum values. In efx_nic_update_stats, only mask; gaps are removed in efx_ef10_update_stats. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/nic.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c index e7dbd2dd202e..9826594c8a48 100644 --- a/drivers/net/ethernet/sfc/nic.c +++ b/drivers/net/ethernet/sfc/nic.c @@ -469,8 +469,7 @@ size_t efx_nic_describe_stats(const struct efx_hw_stat_desc *desc, size_t count, * @count: Length of the @desc array * @mask: Bitmask of which elements of @desc are enabled * @stats: Buffer to update with the converted statistics. The length - * of this array must be at least the number of set bits in the - * first @count bits of @mask. + * of this array must be at least @count. * @dma_buf: DMA buffer containing hardware statistics * @accumulate: If set, the converted values will be added rather than * directly stored to the corresponding elements of @stats @@ -503,11 +502,9 @@ void efx_nic_update_stats(const struct efx_hw_stat_desc *desc, size_t count, } if (accumulate) - *stats += val; + stats[index] += val; else - *stats = val; + stats[index] = val; } - - ++stats; } } -- cgit v1.2.2 From 4bae913bd372aab90fdbd91e7e5fb841a2a0dc15 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Fri, 27 Sep 2013 18:52:49 +0100 Subject: sfc: Refactor EF10 stat mask code to allow for more conditional stats Previously, efx_ef10_stat_mask returned a static const unsigned long[], which meant that each possible mask had to be declared statically with STAT_MASK_BITMAP. Since adding a condition would double the size of the decision tree, we now create the bitmask dynamically. To do this, we have two functions efx_ef10_raw_stat_mask, which returns a u64, and efx_ef10_get_stat_mask, which fills in an unsigned long * argument. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/ef10.c | 49 +++++++++++++++++++++++------------------ 1 file changed, 28 insertions(+), 21 deletions(-) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index a4fbb383ac63..c00a5d69c94a 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -498,44 +498,49 @@ static const struct efx_hw_stat_desc efx_ef10_stat_desc[EF10_STAT_COUNT] = { #define HUNT_40G_EXTRA_STAT_MASK ((1ULL << EF10_STAT_rx_align_error) | \ (1ULL << EF10_STAT_rx_length_error)) -#if BITS_PER_LONG == 64 -#define STAT_MASK_BITMAP(bits) (bits) -#else -#define STAT_MASK_BITMAP(bits) (bits) & 0xffffffff, (bits) >> 32 -#endif - -static const unsigned long *efx_ef10_stat_mask(struct efx_nic *efx) +static u64 efx_ef10_raw_stat_mask(struct efx_nic *efx) { - static const unsigned long hunt_40g_stat_mask[] = { - STAT_MASK_BITMAP(HUNT_COMMON_STAT_MASK | - HUNT_40G_EXTRA_STAT_MASK) - }; - static const unsigned long hunt_10g_only_stat_mask[] = { - STAT_MASK_BITMAP(HUNT_COMMON_STAT_MASK | - HUNT_10G_ONLY_STAT_MASK) - }; + u64 raw_mask = HUNT_COMMON_STAT_MASK; u32 port_caps = efx_mcdi_phy_get_caps(efx); if (port_caps & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) - return hunt_40g_stat_mask; + raw_mask |= HUNT_40G_EXTRA_STAT_MASK; else - return hunt_10g_only_stat_mask; + raw_mask |= HUNT_10G_ONLY_STAT_MASK; + return raw_mask; +} + +static void efx_ef10_get_stat_mask(struct efx_nic *efx, unsigned long *mask) +{ + u64 raw_mask = efx_ef10_raw_stat_mask(efx); + +#if BITS_PER_LONG == 64 + mask[0] = raw_mask; +#else + mask[0] = raw_mask & 0xffffffff; + mask[1] = raw_mask >> 32; +#endif } static size_t efx_ef10_describe_stats(struct efx_nic *efx, u8 *names) { + DECLARE_BITMAP(mask, EF10_STAT_COUNT); + + efx_ef10_get_stat_mask(efx, mask); return efx_nic_describe_stats(efx_ef10_stat_desc, EF10_STAT_COUNT, - efx_ef10_stat_mask(efx), names); + mask, names); } static int efx_ef10_try_update_nic_stats(struct efx_nic *efx) { struct efx_ef10_nic_data *nic_data = efx->nic_data; - const unsigned long *stats_mask = efx_ef10_stat_mask(efx); + DECLARE_BITMAP(mask, EF10_STAT_COUNT); __le64 generation_start, generation_end; u64 *stats = nic_data->stats; __le64 *dma_stats; + efx_ef10_get_stat_mask(efx, mask); + dma_stats = efx->stats_buffer.addr; nic_data = efx->nic_data; @@ -543,7 +548,7 @@ static int efx_ef10_try_update_nic_stats(struct efx_nic *efx) if (generation_end == EFX_MC_STATS_GENERATION_INVALID) return 0; rmb(); - efx_nic_update_stats(efx_ef10_stat_desc, EF10_STAT_COUNT, stats_mask, + efx_nic_update_stats(efx_ef10_stat_desc, EF10_STAT_COUNT, mask, stats, efx->stats_buffer.addr, false); rmb(); generation_start = dma_stats[MC_CMD_MAC_GENERATION_START]; @@ -564,12 +569,14 @@ static int efx_ef10_try_update_nic_stats(struct efx_nic *efx) static size_t efx_ef10_update_stats(struct efx_nic *efx, u64 *full_stats, struct rtnl_link_stats64 *core_stats) { - const unsigned long *mask = efx_ef10_stat_mask(efx); + DECLARE_BITMAP(mask, EF10_STAT_COUNT); struct efx_ef10_nic_data *nic_data = efx->nic_data; u64 *stats = nic_data->stats; size_t stats_count = 0, index; int retry; + efx_ef10_get_stat_mask(efx, mask); + /* If we're unlucky enough to read statistics during the DMA, wait * up to 10ms for it to finish (typically takes <500us) */ -- cgit v1.2.2 From 2ca10a75d897c6cd3cfcf87567551d775c9b10bb Mon Sep 17 00:00:00 2001 From: Matthew Slattery Date: Tue, 10 Sep 2013 19:06:27 +0100 Subject: sfc: Add definitions for new stats counters and capability flag Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/mcdi_pcol.h | 56 ++++++++++++++++++++++++++++++++++-- 1 file changed, 54 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h index b5cf62492f8e..e0a63ddb7a6c 100644 --- a/drivers/net/ethernet/sfc/mcdi_pcol.h +++ b/drivers/net/ethernet/sfc/mcdi_pcol.h @@ -2574,8 +2574,58 @@ #define MC_CMD_MAC_RX_LANES01_DISP_ERR 0x39 /* enum */ #define MC_CMD_MAC_RX_LANES23_DISP_ERR 0x3a /* enum */ #define MC_CMD_MAC_RX_MATCH_FAULT 0x3b /* enum */ -#define MC_CMD_GMAC_DMABUF_START 0x40 /* enum */ -#define MC_CMD_GMAC_DMABUF_END 0x5f /* enum */ +/* enum: PM trunc_bb_overflow counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_TRUNC_BB_OVERFLOW 0x3c +/* enum: PM discard_bb_overflow counter. Valid for EF10 with + * PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_PM_DISCARD_BB_OVERFLOW 0x3d +/* enum: PM trunc_vfifo_full counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_TRUNC_VFIFO_FULL 0x3e +/* enum: PM discard_vfifo_full counter. Valid for EF10 with + * PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_PM_DISCARD_VFIFO_FULL 0x3f +/* enum: PM trunc_qbb counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_TRUNC_QBB 0x40 +/* enum: PM discard_qbb counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_DISCARD_QBB 0x41 +/* enum: PM discard_mapping counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_DISCARD_MAPPING 0x42 +/* enum: RXDP counter: Number of packets dropped due to the queue being + * disabled. Valid for EF10 with PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_Q_DISABLED_PKTS 0x43 +/* enum: RXDP counter: Number of packets dropped by the DICPU. Valid for EF10 + * with PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_DI_DROPPED_PKTS 0x45 +/* enum: RXDP counter: Number of non-host packets. Valid for EF10 with + * PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_STREAMING_PKTS 0x46 +/* enum: RXDP counter: Number of times an emergency descriptor fetch was + * performed. Valid for EF10 with PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_EMERGENCY_FETCH_CONDITIONS 0x47 +/* enum: RXDP counter: Number of times the DPCPU waited for an existing + * descriptor fetch. Valid for EF10 with PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_EMERGENCY_WAIT_CONDITIONS 0x48 +/* enum: Start of GMAC stats buffer space, for Siena only. */ +#define MC_CMD_GMAC_DMABUF_START 0x40 +/* enum: End of GMAC stats buffer space, for Siena only. */ +#define MC_CMD_GMAC_DMABUF_END 0x5f #define MC_CMD_MAC_GENERATION_END 0x60 /* enum */ #define MC_CMD_MAC_NSTATS 0x61 /* enum */ @@ -5065,6 +5115,8 @@ #define MC_CMD_GET_CAPABILITIES_OUT_RX_BATCHING_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_OUT_MCAST_FILTER_CHAINING_LBN 26 #define MC_CMD_GET_CAPABILITIES_OUT_MCAST_FILTER_CHAINING_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_OUT_PM_AND_RXDP_COUNTERS_LBN 27 +#define MC_CMD_GET_CAPABILITIES_OUT_PM_AND_RXDP_COUNTERS_WIDTH 1 /* RxDPCPU firmware id. */ #define MC_CMD_GET_CAPABILITIES_OUT_RX_DPCPU_FW_ID_OFST 4 #define MC_CMD_GET_CAPABILITIES_OUT_RX_DPCPU_FW_ID_LEN 2 -- cgit v1.2.2 From 568d7a001bd5612a280e1026cce7e6e2e16b7687 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Wed, 25 Sep 2013 17:32:09 +0100 Subject: sfc: Add PM and RXDP drop counters to ethtool stats Recognise the new Packet Memory and RX Data Path counters. The following counters are added: rx_pm_{trunc,discard}_bb_overflow - burst buffer overflowed. This should not occur if BB correctly configured. rx_pm_{trunc,discard}_vfifo_full - not enough space in packet memory. May indicate RX performance problems. rx_pm_{trunc,discard}_qbb - dropped by 802.1Qbb early discard mechanism. Since Qbb is not supported at present, this should not occur. rx_pm_discard_mapping - 802.1p priority configured to be dropped. This should not occur in normal operation. rx_dp_q_disabled_packets - packet was to be delivered to a queue but queue is disabled. May indicate misconfiguration by the driver. rx_dp_di_dropped_packets - parser-dispatcher indicated that a packet should be dropped. rx_dp_streaming_packets - packet was sent to the RXDP streaming bus, ie. a filter directed the packet to the MCPU. rx_dp_emerg_{fetch,wait} - RX datapath had to wait for descriptors to be loaded. Indicates performance problems but not drops. These are only provided if the MC firmware has the PM_AND_RXDP_COUNTERS capability. Otherwise, mask them out. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/ef10.c | 35 +++++++++++++++++++++++++++++++++++ drivers/net/ethernet/sfc/nic.h | 12 ++++++++++++ 2 files changed, 47 insertions(+) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index c00a5d69c94a..21f9ad6392e9 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -444,6 +444,18 @@ static const struct efx_hw_stat_desc efx_ef10_stat_desc[EF10_STAT_COUNT] = { EF10_DMA_STAT(rx_align_error, RX_ALIGN_ERROR_PKTS), EF10_DMA_STAT(rx_length_error, RX_LENGTH_ERROR_PKTS), EF10_DMA_STAT(rx_nodesc_drops, RX_NODESC_DROPS), + EF10_DMA_STAT(rx_pm_trunc_bb_overflow, PM_TRUNC_BB_OVERFLOW), + EF10_DMA_STAT(rx_pm_discard_bb_overflow, PM_DISCARD_BB_OVERFLOW), + EF10_DMA_STAT(rx_pm_trunc_vfifo_full, PM_TRUNC_VFIFO_FULL), + EF10_DMA_STAT(rx_pm_discard_vfifo_full, PM_DISCARD_VFIFO_FULL), + EF10_DMA_STAT(rx_pm_trunc_qbb, PM_TRUNC_QBB), + EF10_DMA_STAT(rx_pm_discard_qbb, PM_DISCARD_QBB), + EF10_DMA_STAT(rx_pm_discard_mapping, PM_DISCARD_MAPPING), + EF10_DMA_STAT(rx_dp_q_disabled_packets, RXDP_Q_DISABLED_PKTS), + EF10_DMA_STAT(rx_dp_di_dropped_packets, RXDP_DI_DROPPED_PKTS), + EF10_DMA_STAT(rx_dp_streaming_packets, RXDP_STREAMING_PKTS), + EF10_DMA_STAT(rx_dp_emerg_fetch, RXDP_EMERGENCY_FETCH_CONDITIONS), + EF10_DMA_STAT(rx_dp_emerg_wait, RXDP_EMERGENCY_WAIT_CONDITIONS), }; #define HUNT_COMMON_STAT_MASK ((1ULL << EF10_STAT_tx_bytes) | \ @@ -498,15 +510,38 @@ static const struct efx_hw_stat_desc efx_ef10_stat_desc[EF10_STAT_COUNT] = { #define HUNT_40G_EXTRA_STAT_MASK ((1ULL << EF10_STAT_rx_align_error) | \ (1ULL << EF10_STAT_rx_length_error)) +/* These statistics are only provided if the firmware supports the + * capability PM_AND_RXDP_COUNTERS. + */ +#define HUNT_PM_AND_RXDP_STAT_MASK ( \ + (1ULL << EF10_STAT_rx_pm_trunc_bb_overflow) | \ + (1ULL << EF10_STAT_rx_pm_discard_bb_overflow) | \ + (1ULL << EF10_STAT_rx_pm_trunc_vfifo_full) | \ + (1ULL << EF10_STAT_rx_pm_discard_vfifo_full) | \ + (1ULL << EF10_STAT_rx_pm_trunc_qbb) | \ + (1ULL << EF10_STAT_rx_pm_discard_qbb) | \ + (1ULL << EF10_STAT_rx_pm_discard_mapping) | \ + (1ULL << EF10_STAT_rx_dp_q_disabled_packets) | \ + (1ULL << EF10_STAT_rx_dp_di_dropped_packets) | \ + (1ULL << EF10_STAT_rx_dp_streaming_packets) | \ + (1ULL << EF10_STAT_rx_dp_emerg_fetch) | \ + (1ULL << EF10_STAT_rx_dp_emerg_wait)) + static u64 efx_ef10_raw_stat_mask(struct efx_nic *efx) { u64 raw_mask = HUNT_COMMON_STAT_MASK; u32 port_caps = efx_mcdi_phy_get_caps(efx); + struct efx_ef10_nic_data *nic_data = efx->nic_data; if (port_caps & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) raw_mask |= HUNT_40G_EXTRA_STAT_MASK; else raw_mask |= HUNT_10G_ONLY_STAT_MASK; + + if (nic_data->datapath_caps & + (1 << MC_CMD_GET_CAPABILITIES_OUT_PM_AND_RXDP_COUNTERS_LBN)) + raw_mask |= HUNT_PM_AND_RXDP_STAT_MASK; + return raw_mask; } diff --git a/drivers/net/ethernet/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h index fda29d39032f..890bbbe8320e 100644 --- a/drivers/net/ethernet/sfc/nic.h +++ b/drivers/net/ethernet/sfc/nic.h @@ -386,6 +386,18 @@ enum { EF10_STAT_rx_align_error, EF10_STAT_rx_length_error, EF10_STAT_rx_nodesc_drops, + EF10_STAT_rx_pm_trunc_bb_overflow, + EF10_STAT_rx_pm_discard_bb_overflow, + EF10_STAT_rx_pm_trunc_vfifo_full, + EF10_STAT_rx_pm_discard_vfifo_full, + EF10_STAT_rx_pm_trunc_qbb, + EF10_STAT_rx_pm_discard_qbb, + EF10_STAT_rx_pm_discard_mapping, + EF10_STAT_rx_dp_q_disabled_packets, + EF10_STAT_rx_dp_di_dropped_packets, + EF10_STAT_rx_dp_streaming_packets, + EF10_STAT_rx_dp_emerg_fetch, + EF10_STAT_rx_dp_emerg_wait, EF10_STAT_COUNT }; -- cgit v1.2.2 From 3573540cafa4296dd60f8be02f2aecaa31047525 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 2 Oct 2013 09:14:06 +0300 Subject: netif_set_xps_queue: make cpu mask const virtio wants to pass in cpumask_of(cpu), make parameter const to avoid build warnings. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- include/linux/netdevice.h | 5 +++-- net/core/dev.c | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3de49aca4519..25f5d2d11e7c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2264,11 +2264,12 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index) } #ifdef CONFIG_XPS -extern int netif_set_xps_queue(struct net_device *dev, struct cpumask *mask, +extern int netif_set_xps_queue(struct net_device *dev, + const struct cpumask *mask, u16 index); #else static inline int netif_set_xps_queue(struct net_device *dev, - struct cpumask *mask, + const struct cpumask *mask, u16 index) { return 0; diff --git a/net/core/dev.c b/net/core/dev.c index 65f829cfd928..3430b1ed12e5 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1917,7 +1917,8 @@ static struct xps_map *expand_xps_map(struct xps_map *map, return new_map; } -int netif_set_xps_queue(struct net_device *dev, struct cpumask *mask, u16 index) +int netif_set_xps_queue(struct net_device *dev, const struct cpumask *mask, + u16 index) { struct xps_dev_maps *dev_maps, *new_dev_maps = NULL; struct xps_map *map, *new_map; -- cgit v1.2.2 From 582442d6d5bc74c1e11a2515f9387d3d227278e2 Mon Sep 17 00:00:00 2001 From: Oussama Ghorbel Date: Thu, 3 Oct 2013 14:49:26 +0100 Subject: ipv6: Allow the MTU of ipip6 tunnel to be set below 1280 The (inner) MTU of a ipip6 (IPv4-in-IPv6) tunnel cannot be set below 1280, which is the minimum MTU in IPv6. However, there should be no IPv6 on the tunnel interface at all, so the IPv6 rules should not apply. More info at https://bugzilla.kernel.org/show_bug.cgi?id=15530 This patch allows to check the minimum MTU for ipv6 tunnel according to these rules: -In case the tunnel is configured with ipip6 mode the minimum MTU is 68. -In case the tunnel is configured with ip6ip6 or any mode the minimum MTU is 1280. Signed-off-by: Oussama Ghorbel Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index a791552e0422..583b77e2f69b 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1430,9 +1430,17 @@ ip6_tnl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) static int ip6_tnl_change_mtu(struct net_device *dev, int new_mtu) { - if (new_mtu < IPV6_MIN_MTU) { - return -EINVAL; + struct ip6_tnl *tnl = netdev_priv(dev); + + if (tnl->parms.proto == IPPROTO_IPIP) { + if (new_mtu < 68) + return -EINVAL; + } else { + if (new_mtu < IPV6_MIN_MTU) + return -EINVAL; } + if (new_mtu > 0xFFF8 - dev->hard_header_len) + return -EINVAL; dev->mtu = new_mtu; return 0; } -- cgit v1.2.2 From ec30326ea773900da210c495e14cfeb532550ba2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 5 Oct 2013 14:09:30 +0200 Subject: ath9k: fix tx queue scheduling after channel changes Otherwise, if queues are full during a scan, tx scheduling does not resume after switching back to the home channel. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index e4f65900132d..709301f88dcd 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -208,6 +208,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); unsigned long flags; + int i; if (ath_startrecv(sc) != 0) { ath_err(common, "Unable to restart recv logic\n"); @@ -235,6 +236,15 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) } work: ath_restart_work(sc); + + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (!ATH_TXQ_SETUP(sc, i)) + continue; + + spin_lock_bh(&sc->tx.txq[i].axq_lock); + ath_txq_schedule(sc, &sc->tx.txq[i]); + spin_unlock_bh(&sc->tx.txq[i].axq_lock); + } } ieee80211_wake_queues(sc->hw); @@ -539,21 +549,10 @@ chip_reset: static int ath_reset(struct ath_softc *sc) { - int i, r; + int r; ath9k_ps_wakeup(sc); - r = ath_reset_internal(sc, NULL); - - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { - if (!ATH_TXQ_SETUP(sc, i)) - continue; - - spin_lock_bh(&sc->tx.txq[i].axq_lock); - ath_txq_schedule(sc, &sc->tx.txq[i]); - spin_unlock_bh(&sc->tx.txq[i].axq_lock); - } - ath9k_ps_restore(sc); return r; -- cgit v1.2.2 From d107babca27f3c08e399616483e4c5f010bd24d3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Sep 2013 11:02:46 +0200 Subject: iwlwifi: pcie: fix merge damage The merge b35c8097 seems to have lost commit eabc4ac5d, put the code back. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/pcie/trans.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index bad95d28d50d..c3f904d422b0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1401,6 +1401,10 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, spin_lock_init(&trans_pcie->reg_lock); init_waitqueue_head(&trans_pcie->ucode_write_waitq); + err = pci_enable_device(pdev); + if (err) + goto out_no_pci; + if (!cfg->base_params->pcie_l1_allowed) { /* * W/A - seems to solve weird behavior. We need to remove this @@ -1412,10 +1416,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, PCIE_LINK_STATE_CLKPM); } - err = pci_enable_device(pdev); - if (err) - goto out_no_pci; - pci_set_master(pdev); err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); -- cgit v1.2.2 From ecb1c9cc215cb5a4390b714d8b09de637f54fa3f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 7 Oct 2013 20:10:11 +0100 Subject: sfc: Only bind to EF10 functions with the LinkCtrl and Trusted flags Although we do not yet enable multiple PFs per port, it is possible that a board will be reconfigured to enable them while the driver has not yet been updated to fully support this. The most obvious problem is that multiple functions may try to set conflicting link settings. But we will also run into trouble if the firmware doesn't consider us fully trusted. So, abort probing unless both the LinkCtrl and Trusted flags are set for this function. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/mcdi.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c index c082562dbf4e..366c8e3e3784 100644 --- a/drivers/net/ethernet/sfc/mcdi.c +++ b/drivers/net/ethernet/sfc/mcdi.c @@ -963,7 +963,7 @@ static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating, bool *was_attached) { MCDI_DECLARE_BUF(inbuf, MC_CMD_DRV_ATTACH_IN_LEN); - MCDI_DECLARE_BUF(outbuf, MC_CMD_DRV_ATTACH_OUT_LEN); + MCDI_DECLARE_BUF(outbuf, MC_CMD_DRV_ATTACH_EXT_OUT_LEN); size_t outlen; int rc; @@ -981,6 +981,22 @@ static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating, goto fail; } + /* We currently assume we have control of the external link + * and are completely trusted by firmware. Abort probing + * if that's not true for this function. + */ + if (driver_operating && + outlen >= MC_CMD_DRV_ATTACH_EXT_OUT_LEN && + (MCDI_DWORD(outbuf, DRV_ATTACH_EXT_OUT_FUNC_FLAGS) & + (1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_LINKCTRL | + 1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED)) != + (1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_LINKCTRL | + 1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED)) { + netif_err(efx, probe, efx->net_dev, + "This driver version only supports one function per port\n"); + return -ENODEV; + } + if (was_attached != NULL) *was_attached = MCDI_DWORD(outbuf, DRV_ATTACH_OUT_OLD_STATE); return 0; -- cgit v1.2.2 From d45ed4a4e33ae103053c0a53d280014e7101bb5c Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Fri, 4 Oct 2013 00:14:06 -0700 Subject: net: fix unsafe set_memory_rw from softirq on x86 system with net.core.bpf_jit_enable = 1 sudo tcpdump -i eth1 'tcp port 22' causes the warning: [ 56.766097] Possible unsafe locking scenario: [ 56.766097] [ 56.780146] CPU0 [ 56.786807] ---- [ 56.793188] lock(&(&vb->lock)->rlock); [ 56.799593] [ 56.805889] lock(&(&vb->lock)->rlock); [ 56.812266] [ 56.812266] *** DEADLOCK *** [ 56.812266] [ 56.830670] 1 lock held by ksoftirqd/1/13: [ 56.836838] #0: (rcu_read_lock){.+.+..}, at: [] vm_unmap_aliases+0x8c/0x380 [ 56.849757] [ 56.849757] stack backtrace: [ 56.862194] CPU: 1 PID: 13 Comm: ksoftirqd/1 Not tainted 3.12.0-rc3+ #45 [ 56.868721] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 56.882004] ffffffff821944c0 ffff88080bbdb8c8 ffffffff8175a145 0000000000000007 [ 56.895630] ffff88080bbd5f40 ffff88080bbdb928 ffffffff81755b14 0000000000000001 [ 56.909313] ffff880800000001 ffff880800000000 ffffffff8101178f 0000000000000001 [ 56.923006] Call Trace: [ 56.929532] [] dump_stack+0x55/0x76 [ 56.936067] [] print_usage_bug+0x1f7/0x208 [ 56.942445] [] ? save_stack_trace+0x2f/0x50 [ 56.948932] [] ? check_usage_backwards+0x150/0x150 [ 56.955470] [] mark_lock+0x282/0x2c0 [ 56.961945] [] __lock_acquire+0x45d/0x1d50 [ 56.968474] [] ? __lock_acquire+0x2de/0x1d50 [ 56.975140] [] ? cpumask_next_and+0x55/0x90 [ 56.981942] [] lock_acquire+0x92/0x1d0 [ 56.988745] [] ? vm_unmap_aliases+0x16a/0x380 [ 56.995619] [] _raw_spin_lock+0x41/0x50 [ 57.002493] [] ? vm_unmap_aliases+0x16a/0x380 [ 57.009447] [] vm_unmap_aliases+0x16a/0x380 [ 57.016477] [] ? vm_unmap_aliases+0x8c/0x380 [ 57.023607] [] change_page_attr_set_clr+0xc0/0x460 [ 57.030818] [] ? trace_hardirqs_on+0xd/0x10 [ 57.037896] [] ? kmem_cache_free+0xb0/0x2b0 [ 57.044789] [] ? free_object_rcu+0x93/0xa0 [ 57.051720] [] set_memory_rw+0x2f/0x40 [ 57.058727] [] bpf_jit_free+0x2c/0x40 [ 57.065577] [] sk_filter_release_rcu+0x1a/0x30 [ 57.072338] [] rcu_process_callbacks+0x202/0x7c0 [ 57.078962] [] __do_softirq+0xf7/0x3f0 [ 57.085373] [] run_ksoftirqd+0x35/0x70 cannot reuse jited filter memory, since it's readonly, so use original bpf insns memory to hold work_struct defer kfree of sk_filter until jit completed freeing tested on x86_64 and i386 Signed-off-by: Alexei Starovoitov Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- arch/arm/net/bpf_jit_32.c | 1 + arch/powerpc/net/bpf_jit_comp.c | 1 + arch/s390/net/bpf_jit_comp.c | 4 +++- arch/sparc/net/bpf_jit_comp.c | 1 + arch/x86/net/bpf_jit_comp.c | 18 +++++++++++++----- include/linux/filter.h | 15 +++++++++++---- include/net/sock.h | 6 ++---- net/core/filter.c | 8 ++++---- 8 files changed, 36 insertions(+), 18 deletions(-) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index f50d223a0bd3..99b44e0e8d86 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -930,4 +930,5 @@ void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) module_free(NULL, fp->bpf_func); + kfree(fp); } diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index bf56e33f8257..2345bdb4d917 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -691,4 +691,5 @@ void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) module_free(NULL, fp->bpf_func); + kfree(fp); } diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 709239285869..a5df511e27a2 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -881,7 +881,9 @@ void bpf_jit_free(struct sk_filter *fp) struct bpf_binary_header *header = (void *)addr; if (fp->bpf_func == sk_run_filter) - return; + goto free_filter; set_memory_rw(addr, header->pages); module_free(NULL, header); +free_filter: + kfree(fp); } diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c index 9c7be59e6f5a..218b6b23c378 100644 --- a/arch/sparc/net/bpf_jit_comp.c +++ b/arch/sparc/net/bpf_jit_comp.c @@ -808,4 +808,5 @@ void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) module_free(NULL, fp->bpf_func); + kfree(fp); } diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 79c216aa0e2b..516593e1ce33 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -772,13 +772,21 @@ out: return; } +static void bpf_jit_free_deferred(struct work_struct *work) +{ + struct sk_filter *fp = container_of(work, struct sk_filter, work); + unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; + struct bpf_binary_header *header = (void *)addr; + + set_memory_rw(addr, header->pages); + module_free(NULL, header); + kfree(fp); +} + void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) { - unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; - struct bpf_binary_header *header = (void *)addr; - - set_memory_rw(addr, header->pages); - module_free(NULL, header); + INIT_WORK(&fp->work, bpf_jit_free_deferred); + schedule_work(&fp->work); } } diff --git a/include/linux/filter.h b/include/linux/filter.h index a6ac84871d6d..ff4e40cd45b1 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -6,6 +6,7 @@ #include #include +#include #include #ifdef CONFIG_COMPAT @@ -25,15 +26,19 @@ struct sk_filter { atomic_t refcnt; unsigned int len; /* Number of filter blocks */ + struct rcu_head rcu; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct sock_filter *filter); - struct rcu_head rcu; - struct sock_filter insns[0]; + union { + struct sock_filter insns[0]; + struct work_struct work; + }; }; -static inline unsigned int sk_filter_len(const struct sk_filter *fp) +static inline unsigned int sk_filter_size(unsigned int proglen) { - return fp->len * sizeof(struct sock_filter) + sizeof(*fp); + return max(sizeof(struct sk_filter), + offsetof(struct sk_filter, insns[proglen])); } extern int sk_filter(struct sock *sk, struct sk_buff *skb); @@ -67,11 +72,13 @@ static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen, } #define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns) #else +#include static inline void bpf_jit_compile(struct sk_filter *fp) { } static inline void bpf_jit_free(struct sk_filter *fp) { + kfree(fp); } #define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns) #endif diff --git a/include/net/sock.h b/include/net/sock.h index 1d37a8086bed..808cbc2ec6c1 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1630,16 +1630,14 @@ static inline void sk_filter_release(struct sk_filter *fp) static inline void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp) { - unsigned int size = sk_filter_len(fp); - - atomic_sub(size, &sk->sk_omem_alloc); + atomic_sub(sk_filter_size(fp->len), &sk->sk_omem_alloc); sk_filter_release(fp); } static inline void sk_filter_charge(struct sock *sk, struct sk_filter *fp) { atomic_inc(&fp->refcnt); - atomic_add(sk_filter_len(fp), &sk->sk_omem_alloc); + atomic_add(sk_filter_size(fp->len), &sk->sk_omem_alloc); } /* diff --git a/net/core/filter.c b/net/core/filter.c index 6438f29ff266..01b780856db2 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -644,7 +644,6 @@ void sk_filter_release_rcu(struct rcu_head *rcu) struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu); bpf_jit_free(fp); - kfree(fp); } EXPORT_SYMBOL(sk_filter_release_rcu); @@ -683,7 +682,7 @@ int sk_unattached_filter_create(struct sk_filter **pfp, if (fprog->filter == NULL) return -EINVAL; - fp = kmalloc(fsize + sizeof(*fp), GFP_KERNEL); + fp = kmalloc(sk_filter_size(fprog->len), GFP_KERNEL); if (!fp) return -ENOMEM; memcpy(fp->insns, fprog->filter, fsize); @@ -723,6 +722,7 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk) { struct sk_filter *fp, *old_fp; unsigned int fsize = sizeof(struct sock_filter) * fprog->len; + unsigned int sk_fsize = sk_filter_size(fprog->len); int err; if (sock_flag(sk, SOCK_FILTER_LOCKED)) @@ -732,11 +732,11 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk) if (fprog->filter == NULL) return -EINVAL; - fp = sock_kmalloc(sk, fsize+sizeof(*fp), GFP_KERNEL); + fp = sock_kmalloc(sk, sk_fsize, GFP_KERNEL); if (!fp) return -ENOMEM; if (copy_from_user(fp->insns, fprog->filter, fsize)) { - sock_kfree_s(sk, fp, fsize+sizeof(*fp)); + sock_kfree_s(sk, fp, sk_fsize); return -EFAULT; } -- cgit v1.2.2 From f468b10e3de6c5f90a14b9c82f1403a2651cef35 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 4 Oct 2013 14:44:39 +0200 Subject: net: ethernet: cpsw: Search childs for slave nodes The current implementation searches the whole DT for nodes named "slave". This patch changes it to search only child nodes for slaves. Signed-off-by: Markus Pargmann Acked-by: Mugunthan V N Acked-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 79974e31187a..5df50a96a1da 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1782,7 +1782,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, if (ret) pr_warn("Doesn't have any child node\n"); - for_each_node_by_name(slave_node, "slave") { + for_each_child_of_node(node, slave_node) { struct cpsw_slave_data *slave_data = data->slave_data + i; const void *mac_addr = NULL; u32 phyid; @@ -1791,6 +1791,10 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, struct device_node *mdio_node; struct platform_device *mdio; + /* This is no slave child node, continue */ + if (strcmp(slave_node->name, "slave")) + continue; + parp = of_get_property(slave_node, "phy_id", &lenp); if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) { pr_err("Missing slave[%d] phy_id property\n", i); -- cgit v1.2.2 From 281abd965fedfe7c31927d84e01a5bfa554b5502 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 4 Oct 2013 14:44:40 +0200 Subject: net/ethernet: cpsw: DT read bool dual_emac Signed-off-by: Markus Pargmann Acked-by: Mugunthan V N Acked-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 5df50a96a1da..804846eb5fc2 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1771,8 +1771,8 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, } data->mac_control = prop; - if (!of_property_read_u32(node, "dual_emac", &prop)) - data->dual_emac = prop; + if (of_property_read_bool(node, "dual_emac")) + data->dual_emac = 1; /* * Populate all the child nodes here... -- cgit v1.2.2 From 0a7e22609067ff524fc7bbd45c6951dd08561667 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Fri, 4 Oct 2013 17:04:48 +0200 Subject: ipv4: fix ineffective source address selection When sending out multicast messages, the source address in inet->mc_addr is ignored and rewritten by an autoselected one. This is caused by a typo in commit 813b3b5db831 ("ipv4: Use caller's on-stack flowi as-is in output route lookups"). Signed-off-by: Jiri Benc Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 727f4365bcdf..6011615e810d 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2072,7 +2072,7 @@ struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *fl4) RT_SCOPE_LINK); goto make_route; } - if (fl4->saddr) { + if (!fl4->saddr) { if (ipv4_is_multicast(fl4->daddr)) fl4->saddr = inet_select_addr(dev_out, 0, fl4->flowi4_scope); -- cgit v1.2.2 From fe119a05f8ca481623a8d02efcc984332e612528 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sat, 5 Oct 2013 21:25:17 +0200 Subject: can: dev: fix nlmsg size calculation in can_get_size() This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Signed-off-by: Marc Kleine-Budde Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index f9cba4123c66..1870c4731a57 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -705,14 +705,14 @@ static size_t can_get_size(const struct net_device *dev) size_t size; size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */ - size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */ + size += nla_total_size(sizeof(struct can_ctrlmode)); /* IFLA_CAN_CTRLMODE */ size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ - size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */ - size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */ + size += nla_total_size(sizeof(struct can_bittiming)); /* IFLA_CAN_BITTIMING */ + size += nla_total_size(sizeof(struct can_clock)); /* IFLA_CAN_CLOCK */ if (priv->do_get_berr_counter) /* IFLA_CAN_BERR_COUNTER */ - size += sizeof(struct can_berr_counter); + size += nla_total_size(sizeof(struct can_berr_counter)); if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ - size += sizeof(struct can_bittiming_const); + size += nla_total_size(sizeof(struct can_bittiming_const)); return size; } -- cgit v1.2.2 From 88ba09df236c618b5466d35a0165df0dc865eac5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 5 Oct 2013 13:15:30 -0700 Subject: net: Update the sysctl permissions handler to test effective uid/gid On Tue, 20 Aug 2013 11:40:04 -0500 Eric Sandeen wrote: > This was brought up in a Red Hat bug (which may be marked private, I'm sorry): > > Bug 987055 - open O_WRONLY succeeds on some root owned files in /proc for process running with unprivileged EUID > > "On RHEL7 some of the files in /proc can be opened for writing by an unprivileged EUID." > > The flaw existed upstream as well last I checked. > > This commit in kernel v3.8 caused the regression: > > commit cff109768b2d9c03095848f4cd4b0754117262aa > Author: Eric W. Biederman > Date: Fri Nov 16 03:03:01 2012 +0000 > > net: Update the per network namespace sysctls to be available to the network namespace owner > > - Allow anyone with CAP_NET_ADMIN rights in the user namespace of the > the netowrk namespace to change sysctls. > - Allow anyone the uid of the user namespace root the same > permissions over the network namespace sysctls as the global root. > - Allow anyone with gid of the user namespace root group the same > permissions over the network namespace sysctl as the global root group. > > Signed-off-by: "Eric W. Biederman" > Signed-off-by: David S. Miller > > because it changed /sys/net's special permission handler to test current_uid, not > current_euid; same for current_gid/current_egid. > > So in this case, root cannot drop privs via set[ug]id, and retains all privs > in this codepath. Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: Eric Sandeen Reported-by: Eric Sandeen Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- net/sysctl_net.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sysctl_net.c b/net/sysctl_net.c index 9bc6db04be3e..e7000be321b0 100644 --- a/net/sysctl_net.c +++ b/net/sysctl_net.c @@ -47,12 +47,12 @@ static int net_ctl_permissions(struct ctl_table_header *head, /* Allow network administrator to have same access as root. */ if (ns_capable(net->user_ns, CAP_NET_ADMIN) || - uid_eq(root_uid, current_uid())) { + uid_eq(root_uid, current_euid())) { int mode = (table->mode >> 6) & 7; return (mode << 6) | (mode << 3) | mode; } /* Allow netns root group to have the same access as the root group */ - if (gid_eq(root_gid, current_gid())) { + if (in_egroup_p(root_gid)) { int mode = (table->mode >> 3) & 7; return (mode << 3) | mode; } -- cgit v1.2.2 From e7d8f6cb2f8735693396872f4608bbe305e8baee Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 8 Oct 2013 10:49:45 +0200 Subject: xfrm: Add refcount handling to queued policies We need to ensure that policies can't go away as long as the hold timer is armed, so take a refcont when we arm the timer and drop one if we delete it. Bug was introduced with git commit a0073fe18 ("xfrm: Add a state resolution packet queue") Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_policy.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index ed38d5d81f9e..5f9be976770e 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -334,7 +334,8 @@ static void xfrm_policy_kill(struct xfrm_policy *policy) atomic_inc(&policy->genid); - del_timer(&policy->polq.hold_timer); + if (del_timer(&policy->polq.hold_timer)) + xfrm_pol_put(policy); xfrm_queue_purge(&policy->polq.hold_queue); if (del_timer(&policy->timer)) @@ -589,7 +590,8 @@ static void xfrm_policy_requeue(struct xfrm_policy *old, spin_lock_bh(&pq->hold_queue.lock); skb_queue_splice_init(&pq->hold_queue, &list); - del_timer(&pq->hold_timer); + if (del_timer(&pq->hold_timer)) + xfrm_pol_put(old); spin_unlock_bh(&pq->hold_queue.lock); if (skb_queue_empty(&list)) @@ -600,7 +602,8 @@ static void xfrm_policy_requeue(struct xfrm_policy *old, spin_lock_bh(&pq->hold_queue.lock); skb_queue_splice(&list, &pq->hold_queue); pq->timeout = XFRM_QUEUE_TMO_MIN; - mod_timer(&pq->hold_timer, jiffies); + if (!mod_timer(&pq->hold_timer, jiffies)) + xfrm_pol_hold(new); spin_unlock_bh(&pq->hold_queue.lock); } @@ -1787,8 +1790,9 @@ static void xfrm_policy_queue_process(unsigned long arg) goto purge_queue; pq->timeout = pq->timeout << 1; - mod_timer(&pq->hold_timer, jiffies + pq->timeout); - return; + if (!mod_timer(&pq->hold_timer, jiffies + pq->timeout)) + xfrm_pol_hold(pol); + goto out; } dst_release(dst); @@ -1819,11 +1823,14 @@ static void xfrm_policy_queue_process(unsigned long arg) err = dst_output(skb); } +out: + xfrm_pol_put(pol); return; purge_queue: pq->timeout = 0; xfrm_queue_purge(&pq->hold_queue); + xfrm_pol_put(pol); } static int xdst_queue_output(struct sk_buff *skb) @@ -1831,7 +1838,8 @@ static int xdst_queue_output(struct sk_buff *skb) unsigned long sched_next; struct dst_entry *dst = skb_dst(skb); struct xfrm_dst *xdst = (struct xfrm_dst *) dst; - struct xfrm_policy_queue *pq = &xdst->pols[0]->polq; + struct xfrm_policy *pol = xdst->pols[0]; + struct xfrm_policy_queue *pq = &pol->polq; if (pq->hold_queue.qlen > XFRM_MAX_QUEUE_LEN) { kfree_skb(skb); @@ -1850,10 +1858,12 @@ static int xdst_queue_output(struct sk_buff *skb) if (del_timer(&pq->hold_timer)) { if (time_before(pq->hold_timer.expires, sched_next)) sched_next = pq->hold_timer.expires; + xfrm_pol_put(pol); } __skb_queue_tail(&pq->hold_queue, skb); - mod_timer(&pq->hold_timer, sched_next); + if (!mod_timer(&pq->hold_timer, sched_next)) + xfrm_pol_hold(pol); spin_unlock_bh(&pq->hold_queue.lock); -- cgit v1.2.2 From 2bb53e2557964c2c5368a0392cf3b3b63a288cd0 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 8 Oct 2013 10:49:51 +0200 Subject: xfrm: check for a vaild skb in xfrm_policy_queue_process We might dreference a NULL pointer if the hold_queue is empty, so add a check to avoid this. Bug was introduced with git commit a0073fe18 ("xfrm: Add a state resolution packet queue") Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_policy.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 5f9be976770e..76e1873811d4 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1772,6 +1772,10 @@ static void xfrm_policy_queue_process(unsigned long arg) spin_lock(&pq->hold_queue.lock); skb = skb_peek(&pq->hold_queue); + if (!skb) { + spin_unlock(&pq->hold_queue.lock); + goto out; + } dst = skb_dst(skb); sk = skb->sk; xfrm_decode_session(skb, &fl, dst->ops->family); -- cgit v1.2.2 From 7adac1ec8198e9f5c802918e58a967b92db4a66f Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sat, 5 Oct 2013 23:15:18 -0400 Subject: 6lowpan: Only make 6lowpan links to IEEE802154 devices Refuse to create 6lowpan links if the actual hardware interface is of any type other than ARPHRD_IEEE802154. Signed-off-by: Alan Ott Suggested-by: Alexander Aring Signed-off-by: David S. Miller --- net/ieee802154/6lowpan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index c85e71e0c7ff..8f56b2b63bfb 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1372,6 +1372,8 @@ static int lowpan_newlink(struct net *src_net, struct net_device *dev, real_dev = dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK])); if (!real_dev) return -ENODEV; + if (real_dev->type != ARPHRD_IEEE802154) + return -EINVAL; lowpan_dev_info(dev)->real_dev = real_dev; lowpan_dev_info(dev)->fragment_tag = 0; -- cgit v1.2.2 From ab2d95df9c19f45805977be1c869ba3df9a10835 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sat, 5 Oct 2013 23:15:19 -0400 Subject: 6lowpan: Sync default hardware address of lowpan links to their wpan When a lowpan link to a wpan device is created, set the hardware address of the lowpan link to that of the wpan device. Signed-off-by: Alan Ott Signed-off-by: David S. Miller --- net/ieee802154/6lowpan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index 8f56b2b63bfb..ff41b4d60d30 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1388,6 +1388,9 @@ static int lowpan_newlink(struct net *src_net, struct net_device *dev, entry->ldev = dev; + /* Set the lowpan harware address to the wpan hardware address. */ + memcpy(dev->dev_addr, real_dev->dev_addr, IEEE802154_ADDR_LEN); + mutex_lock(&lowpan_dev_info(dev)->dev_list_mtx); INIT_LIST_HEAD(&entry->list); list_add_tail(&entry->list, &lowpan_devices); -- cgit v1.2.2 From 9757f1d2e0b4e7ff59e76c2fadbf819e18f3f884 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sat, 5 Oct 2013 23:52:22 -0400 Subject: mrf24j40: Move INIT_COMPLETION() to before packet transmission This avoids a race condition where complete(tx_complete) could be called before tx_complete is initialized. Signed-off-by: Alan Ott Signed-off-by: David S. Miller --- drivers/net/ieee802154/mrf24j40.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index 42e6deee6db5..66bb4ceaabe8 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -344,6 +344,8 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb) if (ret) goto err; + INIT_COMPLETION(devrec->tx_complete); + /* Set TXNTRIG bit of TXNCON to send packet */ ret = read_short_reg(devrec, REG_TXNCON, &val); if (ret) @@ -354,8 +356,6 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb) val |= 0x4; write_short_reg(devrec, REG_TXNCON, val); - INIT_COMPLETION(devrec->tx_complete); - /* Wait for the device to send the TX complete interrupt. */ ret = wait_for_completion_interruptible_timeout( &devrec->tx_complete, -- cgit v1.2.2 From 4a4e1da83cc1ff1b8a5171d9b16d4a6c2a6936db Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sat, 5 Oct 2013 23:52:23 -0400 Subject: mrf24j40: Use threaded IRQ handler Eliminate all the workqueue and interrupt enable/disable. Signed-off-by: Alan Ott Signed-off-by: David S. Miller --- drivers/net/ieee802154/mrf24j40.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index 66bb4ceaabe8..c1bc68836346 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -82,7 +82,6 @@ struct mrf24j40 { struct mutex buffer_mutex; /* only used to protect buf */ struct completion tx_complete; - struct work_struct irqwork; u8 *buf; /* 3 bytes. Used for SPI single-register transfers. */ }; @@ -590,17 +589,6 @@ static struct ieee802154_ops mrf24j40_ops = { static irqreturn_t mrf24j40_isr(int irq, void *data) { struct mrf24j40 *devrec = data; - - disable_irq_nosync(irq); - - schedule_work(&devrec->irqwork); - - return IRQ_HANDLED; -} - -static void mrf24j40_isrwork(struct work_struct *work) -{ - struct mrf24j40 *devrec = container_of(work, struct mrf24j40, irqwork); u8 intstat; int ret; @@ -618,7 +606,7 @@ static void mrf24j40_isrwork(struct work_struct *work) mrf24j40_handle_rx(devrec); out: - enable_irq(devrec->spi->irq); + return IRQ_HANDLED; } static int mrf24j40_probe(struct spi_device *spi) @@ -642,7 +630,6 @@ static int mrf24j40_probe(struct spi_device *spi) mutex_init(&devrec->buffer_mutex); init_completion(&devrec->tx_complete); - INIT_WORK(&devrec->irqwork, mrf24j40_isrwork); devrec->spi = spi; spi_set_drvdata(spi, devrec); @@ -688,11 +675,12 @@ static int mrf24j40_probe(struct spi_device *spi) val &= ~0x3; /* Clear RX mode (normal) */ write_short_reg(devrec, REG_RXMCR, val); - ret = request_irq(spi->irq, - mrf24j40_isr, - IRQF_TRIGGER_FALLING, - dev_name(&spi->dev), - devrec); + ret = request_threaded_irq(spi->irq, + NULL, + mrf24j40_isr, + IRQF_TRIGGER_FALLING|IRQF_ONESHOT, + dev_name(&spi->dev), + devrec); if (ret) { dev_err(printdev(devrec), "Unable to get IRQ"); @@ -721,7 +709,6 @@ static int mrf24j40_remove(struct spi_device *spi) dev_dbg(printdev(devrec), "remove\n"); free_irq(spi->irq, devrec); - flush_work(&devrec->irqwork); /* TODO: Is this the right call? */ ieee802154_unregister_device(devrec->dev); ieee802154_free_device(devrec->dev); /* TODO: Will ieee802154_free_device() wait until ->xmit() is -- cgit v1.2.2 From 40afbb657352e92726c40cc4ddf3cf0be6800dba Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sat, 5 Oct 2013 23:52:24 -0400 Subject: mrf24j40: Use level-triggered interrupts The mrf24j40 generates level interrupts. There are rare cases where it appears that the interrupt line never gets de-asserted between interrupts, causing interrupts to be lost, and causing a hung device from the driver's perspective. Switching the driver to interpret these interrupts as level-triggered fixes this issue. Signed-off-by: Alan Ott Signed-off-by: David S. Miller --- drivers/net/ieee802154/mrf24j40.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index c1bc68836346..0632d34905c7 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -678,7 +678,7 @@ static int mrf24j40_probe(struct spi_device *spi) ret = request_threaded_irq(spi->irq, NULL, mrf24j40_isr, - IRQF_TRIGGER_FALLING|IRQF_ONESHOT, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, dev_name(&spi->dev), devrec); -- cgit v1.2.2 From 5c0c52c9102f90c9d5674fb6c5f4f23e3019dd9f Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 6 Oct 2013 21:25:12 +0300 Subject: tun: don't look at current when non-blocking We play with a wait queue even if socket is non blocking. This is an obvious waste. Besides, it will prevent calling the non blocking variant when current is not valid. Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 807815fc9968..7cb105c103fe 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1293,7 +1293,8 @@ static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile, if (unlikely(!noblock)) add_wait_queue(&tfile->wq.wait, &wait); while (len) { - current->state = TASK_INTERRUPTIBLE; + if (unlikely(!noblock)) + current->state = TASK_INTERRUPTIBLE; /* Read frames from the queue */ if (!(skb = skb_dequeue(&tfile->socket.sk->sk_receive_queue))) { @@ -1320,9 +1321,10 @@ static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile, break; } - current->state = TASK_RUNNING; - if (unlikely(!noblock)) + if (unlikely(!noblock)) { + current->state = TASK_RUNNING; remove_wait_queue(&tfile->wq.wait, &wait); + } return ret; } -- cgit v1.2.2 From 8d8a51e26a6d415e1470759f2cf5f3ee3ee86196 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 8 Oct 2013 15:44:26 -0400 Subject: l2tp: Fix build warning with ipv6 disabled. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/l2tp/l2tp_core.c: In function ‘l2tp_verify_udp_checksum’: net/l2tp/l2tp_core.c:499:22: warning: unused variable ‘tunnel’ [-Wunused-variable] Create a helper "l2tp_tunnel()" to facilitate this, and as a side effect get rid of a bunch of unnecessary void pointer casts. Signed-off-by: David S. Miller --- net/l2tp/l2tp_core.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index aedaa2cd4237..b076e8309bc2 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -115,6 +115,11 @@ struct l2tp_net { static void l2tp_session_set_header_len(struct l2tp_session *session, int version); static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel); +static inline struct l2tp_tunnel *l2tp_tunnel(struct sock *sk) +{ + return sk->sk_user_data; +} + static inline struct l2tp_net *l2tp_pernet(struct net *net) { BUG_ON(!net); @@ -496,7 +501,6 @@ out: static inline int l2tp_verify_udp_checksum(struct sock *sk, struct sk_buff *skb) { - struct l2tp_tunnel *tunnel = (struct l2tp_tunnel *)sk->sk_user_data; struct udphdr *uh = udp_hdr(skb); u16 ulen = ntohs(uh->len); __wsum psum; @@ -505,7 +509,7 @@ static inline int l2tp_verify_udp_checksum(struct sock *sk, return 0; #if IS_ENABLED(CONFIG_IPV6) - if (sk->sk_family == PF_INET6 && !tunnel->v4mapped) { + if (sk->sk_family == PF_INET6 && !l2tp_tunnel(sk)->v4mapped) { if (!uh->check) { LIMIT_NETDEBUG(KERN_INFO "L2TP: IPv6: checksum is 0\n"); return 1; @@ -1305,10 +1309,9 @@ EXPORT_SYMBOL_GPL(l2tp_xmit_skb); */ static void l2tp_tunnel_destruct(struct sock *sk) { - struct l2tp_tunnel *tunnel; + struct l2tp_tunnel *tunnel = l2tp_tunnel(sk); struct l2tp_net *pn; - tunnel = sk->sk_user_data; if (tunnel == NULL) goto end; @@ -1676,7 +1679,7 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 } /* Check if this socket has already been prepped */ - tunnel = (struct l2tp_tunnel *)sk->sk_user_data; + tunnel = l2tp_tunnel(sk); if (tunnel != NULL) { /* This socket has already been prepped */ err = -EBUSY; -- cgit v1.2.2 From 2c6221e4a5aab417cb18bef6f1130d1374240258 Mon Sep 17 00:00:00 2001 From: Nguyen Hong Ky Date: Mon, 7 Oct 2013 15:29:25 +0900 Subject: net: sh_eth: Fix RX packets errors on R8A7740 This patch will fix RX packets errors when receiving big size of data by set bit RNC = 1. RNC - Receive Enable Control 0: Upon completion of reception of one frame, the E-DMAC writes the receive status to the descriptor and clears the RR bit in EDRRR to 0. 1: Upon completion of reception of one frame, the E-DMAC writes (writes back) the receive status to the descriptor. In addition, the E-DMAC reads the next descriptor and prepares for reception of the next frame. In addition, for get more stable when receiving packets, I set maximum size for the transmit/receive FIFO and inserts padding in receive data. Signed-off-by: Nguyen Hong Ky Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 5cd831ebfa83..c7e1b8f333ed 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -620,12 +620,16 @@ static struct sh_eth_cpu_data sh7734_data = { .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, + .fdr_value = 0x0000070f, + .rmcr_value = 0x00000001, .apr = 1, .mpr = 1, .tpauser = 1, .bculr = 1, .hw_swap = 1, + .rpadir = 1, + .rpadir_value = 2 << 16, .no_trimd = 1, .no_ade = 1, .tsu = 1, -- cgit v1.2.2 From 70fbe0794393829d9acd686428d87c27b6f6984b Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Mon, 7 Oct 2013 13:38:12 +0200 Subject: net/mlx4_en: Rename name of mlx4_en_rx_alloc members Add page prefix to page related members: @size and @offset into @page_size and @page_offset CC: Eric Dumazet Signed-off-by: Amir Vadai Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 40 ++++++++++++++++------------ drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 4 +-- 2 files changed, 25 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index dec455c8f627..066fc2747854 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -70,14 +70,15 @@ static int mlx4_alloc_pages(struct mlx4_en_priv *priv, put_page(page); return -ENOMEM; } - page_alloc->size = PAGE_SIZE << order; + page_alloc->page_size = PAGE_SIZE << order; page_alloc->page = page; page_alloc->dma = dma; - page_alloc->offset = frag_info->frag_align; + page_alloc->page_offset = frag_info->frag_align; /* Not doing get_page() for each frag is a big win * on asymetric workloads. */ - atomic_set(&page->_count, page_alloc->size / frag_info->frag_stride); + atomic_set(&page->_count, + page_alloc->page_size / frag_info->frag_stride); return 0; } @@ -96,16 +97,19 @@ static int mlx4_en_alloc_frags(struct mlx4_en_priv *priv, for (i = 0; i < priv->num_frags; i++) { frag_info = &priv->frag_info[i]; page_alloc[i] = ring_alloc[i]; - page_alloc[i].offset += frag_info->frag_stride; - if (page_alloc[i].offset + frag_info->frag_stride <= ring_alloc[i].size) + page_alloc[i].page_offset += frag_info->frag_stride; + + if (page_alloc[i].page_offset + frag_info->frag_stride <= + ring_alloc[i].page_size) continue; + if (mlx4_alloc_pages(priv, &page_alloc[i], frag_info, gfp)) goto out; } for (i = 0; i < priv->num_frags; i++) { frags[i] = ring_alloc[i]; - dma = ring_alloc[i].dma + ring_alloc[i].offset; + dma = ring_alloc[i].dma + ring_alloc[i].page_offset; ring_alloc[i] = page_alloc[i]; rx_desc->data[i].addr = cpu_to_be64(dma); } @@ -117,7 +121,7 @@ out: frag_info = &priv->frag_info[i]; if (page_alloc[i].page != ring_alloc[i].page) { dma_unmap_page(priv->ddev, page_alloc[i].dma, - page_alloc[i].size, PCI_DMA_FROMDEVICE); + page_alloc[i].page_size, PCI_DMA_FROMDEVICE); page = page_alloc[i].page; atomic_set(&page->_count, 1); put_page(page); @@ -132,9 +136,10 @@ static void mlx4_en_free_frag(struct mlx4_en_priv *priv, { const struct mlx4_en_frag_info *frag_info = &priv->frag_info[i]; - if (frags[i].offset + frag_info->frag_stride > frags[i].size) - dma_unmap_page(priv->ddev, frags[i].dma, frags[i].size, - PCI_DMA_FROMDEVICE); + if (frags[i].page_offset + frag_info->frag_stride > + frags[i].page_size) + dma_unmap_page(priv->ddev, frags[i].dma, frags[i].page_size, + PCI_DMA_FROMDEVICE); if (frags[i].page) put_page(frags[i].page); @@ -161,7 +166,7 @@ out: page_alloc = &ring->page_alloc[i]; dma_unmap_page(priv->ddev, page_alloc->dma, - page_alloc->size, PCI_DMA_FROMDEVICE); + page_alloc->page_size, PCI_DMA_FROMDEVICE); page = page_alloc->page; atomic_set(&page->_count, 1); put_page(page); @@ -184,10 +189,11 @@ static void mlx4_en_destroy_allocator(struct mlx4_en_priv *priv, i, page_count(page_alloc->page)); dma_unmap_page(priv->ddev, page_alloc->dma, - page_alloc->size, PCI_DMA_FROMDEVICE); - while (page_alloc->offset + frag_info->frag_stride < page_alloc->size) { + page_alloc->page_size, PCI_DMA_FROMDEVICE); + while (page_alloc->page_offset + frag_info->frag_stride < + page_alloc->page_size) { put_page(page_alloc->page); - page_alloc->offset += frag_info->frag_stride; + page_alloc->page_offset += frag_info->frag_stride; } page_alloc->page = NULL; } @@ -478,7 +484,7 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, /* Save page reference in skb */ __skb_frag_set_page(&skb_frags_rx[nr], frags[nr].page); skb_frag_size_set(&skb_frags_rx[nr], frag_info->frag_size); - skb_frags_rx[nr].page_offset = frags[nr].offset; + skb_frags_rx[nr].page_offset = frags[nr].page_offset; skb->truesize += frag_info->frag_stride; frags[nr].page = NULL; } @@ -517,7 +523,7 @@ static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv, /* Get pointer to first fragment so we could copy the headers into the * (linear part of the) skb */ - va = page_address(frags[0].page) + frags[0].offset; + va = page_address(frags[0].page) + frags[0].page_offset; if (length <= SMALL_PACKET_SIZE) { /* We are copying all relevant data to the skb - temporarily @@ -645,7 +651,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud dma_sync_single_for_cpu(priv->ddev, dma, sizeof(*ethh), DMA_FROM_DEVICE); ethh = (struct ethhdr *)(page_address(frags[0].page) + - frags[0].offset); + frags[0].page_offset); if (is_multicast_ether_addr(ethh->h_dest)) { struct mlx4_mac_entry *entry; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 5e0aa569306a..bf06e3610d27 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -237,8 +237,8 @@ struct mlx4_en_tx_desc { struct mlx4_en_rx_alloc { struct page *page; dma_addr_t dma; - u32 offset; - u32 size; + u32 page_offset; + u32 page_size; }; struct mlx4_en_tx_ring { -- cgit v1.2.2 From 021f1107ffdae7a82af6c53f4c52654062e365c6 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Mon, 7 Oct 2013 13:38:13 +0200 Subject: net/mlx4_en: Fix pages never dma unmapped on rx This patch fixes a bug introduced by commit 51151a16 (mlx4: allow order-0 memory allocations in RX path). dma_unmap_page never reached because condition to detect last fragment in page is wrong. offset+frag_stride can't be greater than size, need to make sure no additional frag will fit in page => compare offset + frag_stride + next_frag_size instead. next_frag_size is the same as the current one, since page is shared only with frags of the same size. CC: Eric Dumazet Signed-off-by: Amir Vadai Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 066fc2747854..afe2efa69c86 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -135,9 +135,10 @@ static void mlx4_en_free_frag(struct mlx4_en_priv *priv, int i) { const struct mlx4_en_frag_info *frag_info = &priv->frag_info[i]; + u32 next_frag_end = frags[i].page_offset + 2 * frag_info->frag_stride; - if (frags[i].page_offset + frag_info->frag_stride > - frags[i].page_size) + + if (next_frag_end > frags[i].page_size) dma_unmap_page(priv->ddev, frags[i].dma, frags[i].page_size, PCI_DMA_FROMDEVICE); -- cgit v1.2.2 From dc62ccaccfb139d9b04bbc5a2688a4402adbfab3 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Mon, 7 Oct 2013 13:55:19 +0100 Subject: xen-netback: transition to CLOSED when removing a VIF If a guest is destroyed without transitioning its frontend to CLOSED, the domain becomes a zombie as netback was not grant unmapping the shared rings. When removing a VIF, transition the backend to CLOSED so the VIF is disconnected if necessary (which will unmap the shared rings etc). This fixes a regression introduced by 279f438e36c0a70b23b86d2090aeec50155034a9 (xen-netback: Don't destroy the netdev until the vif is shut down). Signed-off-by: David Vrabel Cc: Ian Campbell Cc: Wei Liu Cc: Paul Durrant Acked-by: Wei Liu Reviewed-by: Paul Durrant Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index b45bce20ad76..1b08d8798372 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -39,11 +39,15 @@ static int connect_rings(struct backend_info *); static void connect(struct backend_info *); static void backend_create_xenvif(struct backend_info *be); static void unregister_hotplug_status_watch(struct backend_info *be); +static void set_backend_state(struct backend_info *be, + enum xenbus_state state); static int netback_remove(struct xenbus_device *dev) { struct backend_info *be = dev_get_drvdata(&dev->dev); + set_backend_state(be, XenbusStateClosed); + unregister_hotplug_status_watch(be); if (be->vif) { kobject_uevent(&dev->dev.kobj, KOBJ_OFFLINE); -- cgit v1.2.2 From 0e719e3a53cc03bc1bafbb2cae1ddf99a0d73ab0 Mon Sep 17 00:00:00 2001 From: Oussama Ghorbel Date: Mon, 7 Oct 2013 18:50:05 +0100 Subject: ipv6: Fix the upper MTU limit in GRE tunnel Unlike ipv4, the struct member hlen holds the length of the GRE and ipv6 headers. This length is also counted in dev->hard_header_len. Perhaps, it's more clean to modify the hlen to count only the GRE header without ipv6 header as the variable name suggest, but the simple way to fix this without regression risk is simply modify the calculation of the limit in ip6gre_tunnel_change_mtu function. Verified in kernel version v3.11. Signed-off-by: Oussama Ghorbel Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 7bb5446b9d73..1ef1fa2b22a6 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1173,9 +1173,8 @@ done: static int ip6gre_tunnel_change_mtu(struct net_device *dev, int new_mtu) { - struct ip6_tnl *tunnel = netdev_priv(dev); if (new_mtu < 68 || - new_mtu > 0xFFF8 - dev->hard_header_len - tunnel->hlen) + new_mtu > 0xFFF8 - dev->hard_header_len) return -EINVAL; dev->mtu = new_mtu; return 0; -- cgit v1.2.2 From ede869cd0f45488195d56267d0c09ed511611d66 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 7 Oct 2013 12:50:18 -0700 Subject: pkt_sched: fq: fix typo for initial_quantum TCA_FQ_INITIAL_QUANTUM should set q->initial_quantum Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_fq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c index a2fef8b10b96..48501a2baf75 100644 --- a/net/sched/sch_fq.c +++ b/net/sched/sch_fq.c @@ -656,7 +656,7 @@ static int fq_change(struct Qdisc *sch, struct nlattr *opt) q->quantum = nla_get_u32(tb[TCA_FQ_QUANTUM]); if (tb[TCA_FQ_INITIAL_QUANTUM]) - q->quantum = nla_get_u32(tb[TCA_FQ_INITIAL_QUANTUM]); + q->initial_quantum = nla_get_u32(tb[TCA_FQ_INITIAL_QUANTUM]); if (tb[TCA_FQ_FLOW_DEFAULT_RATE]) q->flow_default_rate = nla_get_u32(tb[TCA_FQ_FLOW_DEFAULT_RATE]); -- cgit v1.2.2 From c33a39c575068c2ea9bffb22fd6de2df19c74b89 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 7 Oct 2013 23:19:58 +0200 Subject: net: vlan: fix nlmsg size calculation in vlan_get_size() This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Cc: Patrick McHardy Signed-off-by: Marc Kleine-Budde Signed-off-by: David S. Miller --- net/8021q/vlan_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c index 309129732285..c7e634af8516 100644 --- a/net/8021q/vlan_netlink.c +++ b/net/8021q/vlan_netlink.c @@ -171,7 +171,7 @@ static size_t vlan_get_size(const struct net_device *dev) return nla_total_size(2) + /* IFLA_VLAN_PROTOCOL */ nla_total_size(2) + /* IFLA_VLAN_ID */ - sizeof(struct ifla_vlan_flags) + /* IFLA_VLAN_FLAGS */ + nla_total_size(sizeof(struct ifla_vlan_flags)) + /* IFLA_VLAN_FLAGS */ vlan_qos_map_size(vlan->nr_ingress_mappings) + vlan_qos_map_size(vlan->nr_egress_mappings); } -- cgit v1.2.2 From bdfd6304c8e2439fc047fafccf05f145004260bd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 8 Oct 2013 11:19:19 +0800 Subject: moxa: fix the error handling in moxart_mac_probe() This patch fix the error handling in moxart_mac_probe(): - return -ENOMEM in some memory alloc fail cases - add missing free_netdev() in the error handling case Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/moxa/moxart_ether.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index bd1a2d2bc2ae..ea54d95e5b9f 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -448,7 +448,8 @@ static int moxart_mac_probe(struct platform_device *pdev) irq = irq_of_parse_and_map(node, 0); if (irq <= 0) { netdev_err(ndev, "irq_of_parse_and_map failed\n"); - return -EINVAL; + ret = -EINVAL; + goto irq_map_fail; } priv = netdev_priv(ndev); @@ -472,24 +473,32 @@ static int moxart_mac_probe(struct platform_device *pdev) priv->tx_desc_base = dma_alloc_coherent(NULL, TX_REG_DESC_SIZE * TX_DESC_NUM, &priv->tx_base, GFP_DMA | GFP_KERNEL); - if (priv->tx_desc_base == NULL) + if (priv->tx_desc_base == NULL) { + ret = -ENOMEM; goto init_fail; + } priv->rx_desc_base = dma_alloc_coherent(NULL, RX_REG_DESC_SIZE * RX_DESC_NUM, &priv->rx_base, GFP_DMA | GFP_KERNEL); - if (priv->rx_desc_base == NULL) + if (priv->rx_desc_base == NULL) { + ret = -ENOMEM; goto init_fail; + } priv->tx_buf_base = kmalloc(priv->tx_buf_size * TX_DESC_NUM, GFP_ATOMIC); - if (!priv->tx_buf_base) + if (!priv->tx_buf_base) { + ret = -ENOMEM; goto init_fail; + } priv->rx_buf_base = kmalloc(priv->rx_buf_size * RX_DESC_NUM, GFP_ATOMIC); - if (!priv->rx_buf_base) + if (!priv->rx_buf_base) { + ret = -ENOMEM; goto init_fail; + } platform_set_drvdata(pdev, ndev); @@ -522,7 +531,8 @@ static int moxart_mac_probe(struct platform_device *pdev) init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); - +irq_map_fail: + free_netdev(ndev); return ret; } -- cgit v1.2.2 From 2b1f18a4d6ae8057a93e736a34cdcca925279403 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 8 Oct 2013 11:32:17 +0800 Subject: qlcnic: add missing destroy_workqueue() on error path in qlcnic_probe() Add the missing destroy_workqueue() before return from qlcnic_probe() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 21d00a0449a1..f07f2b0fefa0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2257,7 +2257,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = qlcnic_alloc_adapter_resources(adapter); if (err) - goto err_out_free_netdev; + goto err_out_free_wq; adapter->dev_rst_time = jiffies; adapter->ahw->revision_id = pdev->revision; @@ -2396,6 +2396,9 @@ err_out_disable_msi: err_out_free_hw: qlcnic_free_adapter_resources(adapter); +err_out_free_wq: + destroy_workqueue(adapter->qlcnic_wq); + err_out_free_netdev: free_netdev(netdev); -- cgit v1.2.2 From 7eec4174ff29cd42f2acfae8112f51c228545d40 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 8 Oct 2013 15:16:00 -0700 Subject: pkt_sched: fq: fix non TCP flows pacing Steinar reported FQ pacing was not working for UDP flows. It looks like the initial sk->sk_pacing_rate value of 0 was a wrong choice. We should init it to ~0U (unlimited) Then, TCA_FQ_FLOW_DEFAULT_RATE should be removed because it makes no real sense. The default rate is really unlimited, and we need to avoid a zero divide. Reported-by: Steinar H. Gunderson Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/sock.c | 1 + net/sched/sch_fq.c | 20 +++++++++----------- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index 5b6beba494a3..0b39e7ae4383 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -2319,6 +2319,7 @@ void sock_init_data(struct socket *sock, struct sock *sk) sk->sk_ll_usec = sysctl_net_busy_read; #endif + sk->sk_pacing_rate = ~0U; /* * Before updating sk_refcnt, we must commit prior changes to memory * (Documentation/RCU/rculist_nulls.txt for details) diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c index 48501a2baf75..a9dfdda9ed1d 100644 --- a/net/sched/sch_fq.c +++ b/net/sched/sch_fq.c @@ -472,20 +472,16 @@ begin: if (f->credit > 0 || !q->rate_enable) goto out; - if (skb->sk && skb->sk->sk_state != TCP_TIME_WAIT) { - rate = skb->sk->sk_pacing_rate ?: q->flow_default_rate; + rate = q->flow_max_rate; + if (skb->sk && skb->sk->sk_state != TCP_TIME_WAIT) + rate = min(skb->sk->sk_pacing_rate, rate); - rate = min(rate, q->flow_max_rate); - } else { - rate = q->flow_max_rate; - if (rate == ~0U) - goto out; - } - if (rate) { + if (rate != ~0U) { u32 plen = max(qdisc_pkt_len(skb), q->quantum); u64 len = (u64)plen * NSEC_PER_SEC; - do_div(len, rate); + if (likely(rate)) + do_div(len, rate); /* Since socket rate can change later, * clamp the delay to 125 ms. * TODO: maybe segment the too big skb, as in commit @@ -735,12 +731,14 @@ static int fq_dump(struct Qdisc *sch, struct sk_buff *skb) if (opts == NULL) goto nla_put_failure; + /* TCA_FQ_FLOW_DEFAULT_RATE is not used anymore, + * do not bother giving its value + */ if (nla_put_u32(skb, TCA_FQ_PLIMIT, sch->limit) || nla_put_u32(skb, TCA_FQ_FLOW_PLIMIT, q->flow_plimit) || nla_put_u32(skb, TCA_FQ_QUANTUM, q->quantum) || nla_put_u32(skb, TCA_FQ_INITIAL_QUANTUM, q->initial_quantum) || nla_put_u32(skb, TCA_FQ_RATE_ENABLE, q->rate_enable) || - nla_put_u32(skb, TCA_FQ_FLOW_DEFAULT_RATE, q->flow_default_rate) || nla_put_u32(skb, TCA_FQ_FLOW_MAX_RATE, q->flow_max_rate) || nla_put_u32(skb, TCA_FQ_BUCKETS_LOG, q->fq_trees_log)) goto nla_put_failure; -- cgit v1.2.2 From a754055a1296fcbe6f32de3a5eaca6efb2fd1865 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 16 Sep 2013 11:12:07 +0300 Subject: mac80211: correctly close cancelled scans __ieee80211_scan_completed is called from a worker. This means that the following flow is possible. * driver calls ieee80211_scan_completed * mac80211 cancels the scan (that is already complete) * __ieee80211_scan_completed runs When scan_work will finally run, it will see that the scan hasn't been aborted and might even trigger another scan on another band. This leads to a situation where cfg80211's scan is not done and no further scan can be issued. Fix this by setting a new flag when a HW scan is being cancelled so that no other scan will be triggered. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 3 +++ net/mac80211/scan.c | 19 +++++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index b6186517ec56..611abfcfb5eb 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -893,6 +893,8 @@ struct tpt_led_trigger { * that the scan completed. * @SCAN_ABORTED: Set for our scan work function when the driver reported * a scan complete for an aborted scan. + * @SCAN_HW_CANCELLED: Set for our scan work function when the scan is being + * cancelled. */ enum { SCAN_SW_SCANNING, @@ -900,6 +902,7 @@ enum { SCAN_ONCHANNEL_SCANNING, SCAN_COMPLETED, SCAN_ABORTED, + SCAN_HW_CANCELLED, }; /** diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 08afe74b98f4..d2d17a449224 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -238,6 +238,9 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_local *local) enum ieee80211_band band; int i, ielen, n_chans; + if (test_bit(SCAN_HW_CANCELLED, &local->scanning)) + return false; + do { if (local->hw_scan_band == IEEE80211_NUM_BANDS) return false; @@ -940,7 +943,23 @@ void ieee80211_scan_cancel(struct ieee80211_local *local) if (!local->scan_req) goto out; + /* + * We have a scan running and the driver already reported completion, + * but the worker hasn't run yet or is stuck on the mutex - mark it as + * cancelled. + */ + if (test_bit(SCAN_HW_SCANNING, &local->scanning) && + test_bit(SCAN_COMPLETED, &local->scanning)) { + set_bit(SCAN_HW_CANCELLED, &local->scanning); + goto out; + } + if (test_bit(SCAN_HW_SCANNING, &local->scanning)) { + /* + * Make sure that __ieee80211_scan_completed doesn't trigger a + * scan on another band. + */ + set_bit(SCAN_HW_CANCELLED, &local->scanning); if (local->ops->cancel_hw_scan) drv_cancel_hw_scan(local, rcu_dereference_protected(local->scan_sdata, -- cgit v1.2.2 From f38dd58ccca0d612e62509f75e99952dcf316cb2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 17 Sep 2013 15:20:13 +0300 Subject: cfg80211: don't add p2p device while in RFKILL Since P2P device doesn't have a netdev associated to it, we cannot prevent the user to start it when in RFKILL. So refuse to even add it when in RFKILL. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/wireless/core.c | 2 -- net/wireless/core.h | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index fe8d4f2be49b..aff959e5a1b3 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -958,8 +958,6 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, case NETDEV_PRE_UP: if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype))) return notifier_from_errno(-EOPNOTSUPP); - if (rfkill_blocked(rdev->rfkill)) - return notifier_from_errno(-ERFKILL); ret = cfg80211_can_add_interface(rdev, wdev->iftype); if (ret) return notifier_from_errno(ret); diff --git a/net/wireless/core.h b/net/wireless/core.h index 9ad43c619c54..3159e9c284c5 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -411,6 +411,9 @@ static inline int cfg80211_can_add_interface(struct cfg80211_registered_device *rdev, enum nl80211_iftype iftype) { + if (rfkill_blocked(rdev->rfkill)) + return -ERFKILL; + return cfg80211_can_change_interface(rdev, NULL, iftype); } -- cgit v1.2.2 From cb03db9d0e964568407fb08ea46cc2b6b7f67587 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 5 Oct 2013 17:56:59 -0300 Subject: net: secure_seq: Fix warning when CONFIG_IPV6 and CONFIG_INET are not selected net_secret() is only used when CONFIG_IPV6 or CONFIG_INET are selected. Building a defconfig with both of these symbols unselected (Using the ARM at91sam9rl_defconfig, for example) leads to the following build warning: $ make at91sam9rl_defconfig # # configuration written to .config # $ make net/core/secure_seq.o scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh CC net/core/secure_seq.o net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Fix this warning by protecting the definition of net_secret() with these symbols. Reported-by: Olof Johansson Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- net/core/secure_seq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c index 3f1ec1586ae1..8d9d05edd2eb 100644 --- a/net/core/secure_seq.c +++ b/net/core/secure_seq.c @@ -10,6 +10,7 @@ #include +#if IS_ENABLED(CONFIG_IPV6) || IS_ENABLED(CONFIG_INET) #define NET_SECRET_SIZE (MD5_MESSAGE_BYTES / 4) static u32 net_secret[NET_SECRET_SIZE] ____cacheline_aligned; @@ -29,6 +30,7 @@ static void net_secret_init(void) cmpxchg(&net_secret[--i], 0, tmp); } } +#endif #ifdef CONFIG_INET static u32 seq_scale(u32 seq) -- cgit v1.2.2 From ad3660c242adf34a3f598dd8ba8c8d59811788f3 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 9 Oct 2013 20:20:40 +0300 Subject: gianfar: Enable eTSEC-A002 erratum w/a for all parts A002 is still in "no plans to fix" state, and applies to all the current P1/P2 parts as well, so it's resonable to enable its workaround by default, for all the soc's with etsec. The impact of not enabling this workaround for affected parts is that under certain conditons (runt frames or even frames with RX error detected at PHY level) during controller reset, the controller might fail to indicate Rx reset (GRS) completion. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index c4eaadeb572f..db5fc7b16082 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -947,6 +947,9 @@ static void gfar_detect_errata(struct gfar_private *priv) unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */ unsigned int rev = svr & 0xffff; + /* no plans to fix */ + priv->errata |= GFAR_ERRATA_A002; + /* MPC8313 Rev 2.0 and higher; All MPC837x */ if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) || (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) @@ -957,11 +960,6 @@ static void gfar_detect_errata(struct gfar_private *priv) (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) priv->errata |= GFAR_ERRATA_76; - /* MPC8313 and MPC837x all rev */ - if ((pvr == 0x80850010 && mod == 0x80b0) || - (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) - priv->errata |= GFAR_ERRATA_A002; - /* MPC8313 Rev < 2.0, MPC8548 rev 2.0 */ if ((pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020) || (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020)) @@ -1599,7 +1597,7 @@ static int __gfar_is_rx_idle(struct gfar_private *priv) /* Normaly TSEC should not hang on GRS commands, so we should * actually wait for IEVENT_GRSC flag. */ - if (likely(!gfar_has_errata(priv, GFAR_ERRATA_A002))) + if (!gfar_has_errata(priv, GFAR_ERRATA_A002)) return 0; /* Read the eTSEC register at offset 0xD1C. If bits 7-14 are -- cgit v1.2.2 From 2969b1f7259179b6810b02aa6770c8765d9674ad Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 9 Oct 2013 20:20:41 +0300 Subject: gianfar: Use mpc85xx support for errata detection Use the macros and defines from mpc85xx.h to simplify and prevent errors in identifying a mpc85xx based SoC for errata detection. This should help enabling (and identifying) workarounds for various mpc85xx based chips and revisions. For instance, express MPC8548 Rev.2 as: (SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20) instead of: (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020) Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 33 ++++++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index db5fc7b16082..329a20626721 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -88,6 +88,7 @@ #include #include +#include #include #include #include @@ -939,17 +940,13 @@ static void gfar_init_filer_table(struct gfar_private *priv) } } -static void gfar_detect_errata(struct gfar_private *priv) +static void __gfar_detect_errata_83xx(struct gfar_private *priv) { - struct device *dev = &priv->ofdev->dev; unsigned int pvr = mfspr(SPRN_PVR); unsigned int svr = mfspr(SPRN_SVR); unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */ unsigned int rev = svr & 0xffff; - /* no plans to fix */ - priv->errata |= GFAR_ERRATA_A002; - /* MPC8313 Rev 2.0 and higher; All MPC837x */ if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) || (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) @@ -960,10 +957,30 @@ static void gfar_detect_errata(struct gfar_private *priv) (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) priv->errata |= GFAR_ERRATA_76; - /* MPC8313 Rev < 2.0, MPC8548 rev 2.0 */ - if ((pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020) || - (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020)) + /* MPC8313 Rev < 2.0 */ + if (pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020) + priv->errata |= GFAR_ERRATA_12; +} + +static void __gfar_detect_errata_85xx(struct gfar_private *priv) +{ + unsigned int svr = mfspr(SPRN_SVR); + + if ((SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20)) priv->errata |= GFAR_ERRATA_12; +} + +static void gfar_detect_errata(struct gfar_private *priv) +{ + struct device *dev = &priv->ofdev->dev; + + /* no plans to fix */ + priv->errata |= GFAR_ERRATA_A002; + + if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2)) + __gfar_detect_errata_85xx(priv); + else /* non-mpc85xx parts, i.e. e300 core based */ + __gfar_detect_errata_83xx(priv); if (priv->errata) dev_info(dev, "enabled errata workarounds, flags: 0x%x\n", -- cgit v1.2.2 From 53fad77375ce1005cb62105bf63265966a28bca3 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 9 Oct 2013 20:20:42 +0300 Subject: gianfar: Enable eTSEC-20 erratum w/a for P2020 Rev1 Enable workaround for P2020/P2010 erratum eTSEC 20, "Excess delays when transmitting TOE=1 large frames". The impact is that frames lager than 2500-bytes for which TOE (i.e. TCP/IP hw accelerations like Tx csum) is enabled may see excess delay before start of transmission. This erratum was fixed in Rev 2.0. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 329a20626721..9fbe4dda7a0e 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -968,6 +968,9 @@ static void __gfar_detect_errata_85xx(struct gfar_private *priv) if ((SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20)) priv->errata |= GFAR_ERRATA_12; + if (((SVR_SOC_VER(svr) == SVR_P2020) && (SVR_REV(svr) < 0x20)) || + ((SVR_SOC_VER(svr) == SVR_P2010) && (SVR_REV(svr) < 0x20))) + priv->errata |= GFAR_ERRATA_76; /* aka eTSEC 20 */ } static void gfar_detect_errata(struct gfar_private *priv) -- cgit v1.2.2 From d5a7b406c529e4595ce03dc8f6dcf7fa36f106fa Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 4 Oct 2013 10:52:36 +0200 Subject: can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and abort pending TX MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In patch 0d1862e can: flexcan: fix flexcan_chip_start() on imx6 the loop in flexcan_chip_start() that iterates over all mailboxes after the soft reset of the CAN core was removed. This loop put all mailboxes (even the ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63, this aborts any pending TX messages. After a cold boot there is random garbage in the mailboxes, which leads to spontaneous transmit of CAN frames during first activation. Further if the interface was disabled with a pending message (usually due to an error condition on the CAN bus), this message is retransmitted after enabling the interface again. This patch fixes the regression by: 1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX FIFO, 8 is used by TX. 2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that mailbox is aborted. Cc: linux-stable Cc: Lothar Waßmann Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 3f21142138b7..f028c5d52e21 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -62,7 +62,7 @@ #define FLEXCAN_MCR_BCC BIT(16) #define FLEXCAN_MCR_LPRIO_EN BIT(13) #define FLEXCAN_MCR_AEN BIT(12) -#define FLEXCAN_MCR_MAXMB(x) ((x) & 0xf) +#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x1f) #define FLEXCAN_MCR_IDAM_A (0 << 8) #define FLEXCAN_MCR_IDAM_B (1 << 8) #define FLEXCAN_MCR_IDAM_C (2 << 8) @@ -735,9 +735,11 @@ static int flexcan_chip_start(struct net_device *dev) * */ reg_mcr = flexcan_read(®s->mcr); + reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff); reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT | FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN | - FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS; + FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS | + FLEXCAN_MCR_MAXMB(FLEXCAN_TX_BUF_ID); netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr); flexcan_write(reg_mcr, ®s->mcr); @@ -771,6 +773,10 @@ static int flexcan_chip_start(struct net_device *dev) netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl); flexcan_write(reg_ctrl, ®s->ctrl); + /* Abort any pending TX, mark Mailbox as INACTIVE */ + flexcan_write(FLEXCAN_MB_CNT_CODE(0x4), + ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl); + /* acceptance mask/acceptance code (accept everything) */ flexcan_write(0x0, ®s->rxgmask); flexcan_write(0x0, ®s->rx14mask); -- cgit v1.2.2 From e358784297992b012e8071764d996191dd2b1a54 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 3 Oct 2013 23:51:55 +0200 Subject: can: flexcan: fix mx28 detection by rearanging OF match table The current implemetation of of_match_device() relies that the of_device_id table in the driver is sorted from most specific to least specific compatible. Without this patch the mx28 is detected as the less specific p1010. This leads to a p1010 specific workaround is activated on the mx28, which is not needed. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index f028c5d52e21..8f5ce747feb5 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -985,9 +985,9 @@ static void unregister_flexcandev(struct net_device *dev) } static const struct of_device_id flexcan_of_match[] = { - { .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, }, - { .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, }, { .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, }, + { .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, }, + { .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, flexcan_of_match); -- cgit v1.2.2 From 5abbeea553c8260ed4e2ac4aae962aff800b6c6d Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 9 Oct 2013 12:19:19 +0200 Subject: can: at91-can: fix device to driver data mapping for platform devices In commit: 3078cde7 can: at91_can: add dt support device tree support was added to the at91_can driver. In this commit the mapping of device to driver data was mixed up. This results in the sam9x5 parameters being used for the sam9263 and the workaround for the broken mailbox 0 on the sam9263 not being activated. This patch fixes the broken platform_device_id table. Cc: linux-stable Cc: Ludovic Desroches Signed-off-by: Marc Kleine-Budde --- drivers/net/can/at91_can.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 3b1ff6148702..693d8ffe4653 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -1405,10 +1405,10 @@ static int at91_can_remove(struct platform_device *pdev) static const struct platform_device_id at91_can_id_table[] = { { - .name = "at91_can", + .name = "at91sam9x5_can", .driver_data = (kernel_ulong_t)&at91_at91sam9x5_data, }, { - .name = "at91sam9x5_can", + .name = "at91_can", .driver_data = (kernel_ulong_t)&at91_at91sam9263_data, }, { /* sentinel */ -- cgit v1.2.2 From 9473ca6e920a3b9ca902753ce52833657f9221cc Mon Sep 17 00:00:00 2001 From: Mark Cave-Ayland Date: Tue, 8 Oct 2013 10:18:20 -0500 Subject: rtlwifi: rtl8192cu: Fix error in pointer arithmetic An error in calculating the offset in an skb causes the driver to read essential device info from the wrong locations. The main effect is that automatic gain calculations are nonsense. Signed-off-by: Mark Cave-Ayland Signed-off-by: Larry Finger Cc: Stable [2.6.39+] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/trx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c index 763cf1defab5..5a060e537fbe 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c @@ -343,7 +343,8 @@ bool rtl92cu_rx_query_desc(struct ieee80211_hw *hw, (bool)GET_RX_DESC_PAGGR(pdesc)); rx_status->mactime = GET_RX_DESC_TSFL(pdesc); if (phystatus) { - p_drvinfo = (struct rx_fwinfo_92c *)(pdesc + RTL_RX_DESC_SIZE); + p_drvinfo = (struct rx_fwinfo_92c *)(skb->data + + stats->rx_bufshift); rtl92c_translate_rx_signal_stuff(hw, skb, stats, pdesc, p_drvinfo); } -- cgit v1.2.2 From 4978705d26149a629b9f50ff221caed6f1ae3048 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Wed, 9 Oct 2013 12:15:11 -0400 Subject: wireless: cw1200: acquire hwbus lock around cw1200_irq_handler() call. This fixes "lost interrupt" problems that occurred on SPI-based systems. cw1200_irq_handler() expects the hwbus to be locked, but on the SPI-path, that lock wasn't taken (unlike in the SDIO-path, where the generic SDIO-code takes care of acquiring the lock). Cc: stable@vger.kernel.org Signed-off-by: David Mosberger Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- drivers/net/wireless/cw1200/cw1200_spi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c index 899cad34ccd3..755a0c8edfe1 100644 --- a/drivers/net/wireless/cw1200/cw1200_spi.c +++ b/drivers/net/wireless/cw1200/cw1200_spi.c @@ -237,7 +237,9 @@ static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id) struct hwbus_priv *self = dev_id; if (self->core) { + cw1200_spi_lock(self); cw1200_irq_handler(self->core); + cw1200_spi_unlock(self); return IRQ_HANDLED; } else { return IRQ_NONE; -- cgit v1.2.2 From f144febd93d5ee534fdf23505ab091b2b9088edc Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 10 Oct 2013 15:57:59 -0400 Subject: bridge: update mdb expiration timer upon reports. commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b bridge: only expire the mdb entry when query is received changed the mdb expiration timer to be armed only when QUERY is received. Howerver, this causes issues in an environment where the multicast server socket comes and goes very fast while a client is trying to send traffic to it. The root cause is a race where a sequence of LEAVE followed by REPORT messages can race against QUERY messages generated in response to LEAVE. The QUERY ends up starting the expiration timer, and that timer can potentially expire after the new REPORT message has been received signaling the new join operation. This leads to a significant drop in multicast traffic and possible complete stall. The solution is to have REPORT messages update the expiration timer on entries that already exist. CC: Cong Wang CC: Herbert Xu CC: Stephen Hemminger Signed-off-by: Vlad Yasevich Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index d1c578630678..1085f2180f3a 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -611,6 +611,9 @@ rehash: break; default: + /* If we have an existing entry, update it's expire timer */ + mod_timer(&mp->timer, + jiffies + br->multicast_membership_interval); goto out; } @@ -680,8 +683,12 @@ static int br_multicast_add_group(struct net_bridge *br, for (pp = &mp->ports; (p = mlock_dereference(*pp, br)) != NULL; pp = &p->next) { - if (p->port == port) + if (p->port == port) { + /* We already have a portgroup, update the timer. */ + mod_timer(&p->timer, + jiffies + br->multicast_membership_interval); goto out; + } if ((unsigned long)p->port < (unsigned long)port) break; } -- cgit v1.2.2 From 7263a5187f9e9de45fcb51349cf0e031142c19a1 Mon Sep 17 00:00:00 2001 From: Christophe Gouault Date: Tue, 8 Oct 2013 17:21:22 +0200 Subject: vti: get rid of nf mark rule in prerouting This patch fixes and improves the use of vti interfaces (while lightly changing the way of configuring them). Currently: - it is necessary to identify and mark inbound IPsec packets destined to each vti interface, via netfilter rules in the mangle table at prerouting hook. - the vti module cannot retrieve the right tunnel in input since commit b9959fd3: vti tunnels all have an i_key, but the tunnel lookup is done with flag TUNNEL_NO_KEY, so there no chance to retrieve them. - the i_key is used by the outbound processing as a mark to lookup for the right SP and SA bundle. This patch uses the o_key to store the vti mark (instead of i_key) and enables: - to avoid the need for previously marking the inbound skbuffs via a netfilter rule. - to properly retrieve the right tunnel in input, only based on the IPsec packet outer addresses. - to properly perform an inbound policy check (using the tunnel o_key as a mark). - to properly perform an outbound SPD and SAD lookup (using the tunnel o_key as a mark). - to keep the current mark of the skbuff. The skbuff mark is neither used nor changed by the vti interface. Only the vti interface o_key is used. SAs have a wildcard mark. SPs have a mark equal to the vti interface o_key. The vti interface must be created as follows (i_key = 0, o_key = mark): ip link add vti1 mode vti local 1.1.1.1 remote 2.2.2.2 okey 1 The SPs attached to vti1 must be created as follows (mark = vti1 o_key): ip xfrm policy add dir out mark 1 tmpl src 1.1.1.1 dst 2.2.2.2 \ proto esp mode tunnel ip xfrm policy add dir in mark 1 tmpl src 2.2.2.2 dst 1.1.1.1 \ proto esp mode tunnel The SAs are created with the default wildcard mark. There is no distinction between global vs. vti SAs. Just their addresses will possibly link them to a vti interface: ip xfrm state add src 1.1.1.1 dst 2.2.2.2 proto esp spi 1000 mode tunnel \ enc "cbc(aes)" "azertyuiopqsdfgh" ip xfrm state add src 2.2.2.2 dst 1.1.1.1 proto esp spi 2000 mode tunnel \ enc "cbc(aes)" "sqbdhgqsdjqjsdfh" To avoid matching "global" (not vti) SPs in vti interfaces, global SPs should no use the default wildcard mark, but explicitly match mark 0. To avoid a double SPD lookup in input and output (in global and vti SPDs), the NOPOLICY and NOXFRM options should be set on the vti interfaces: echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_policy echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_xfrm The outgoing traffic is steered to vti1 by a route via the vti interface: ip route add 192.168.0.0/16 dev vti1 The incoming IPsec traffic is steered to vti1 because its outer addresses match the vti1 tunnel configuration. Signed-off-by: Christophe Gouault Signed-off-by: David S. Miller --- net/ipv4/ip_vti.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index e805e7b3030e..6e87f853d033 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -125,8 +125,17 @@ static int vti_rcv(struct sk_buff *skb) iph->saddr, iph->daddr, 0); if (tunnel != NULL) { struct pcpu_tstats *tstats; + u32 oldmark = skb->mark; + int ret; - if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) + + /* temporarily mark the skb with the tunnel o_key, to + * only match policies with this mark. + */ + skb->mark = be32_to_cpu(tunnel->parms.o_key); + ret = xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb); + skb->mark = oldmark; + if (!ret) return -1; tstats = this_cpu_ptr(tunnel->dev->tstats); @@ -135,7 +144,6 @@ static int vti_rcv(struct sk_buff *skb) tstats->rx_bytes += skb->len; u64_stats_update_end(&tstats->syncp); - skb->mark = 0; secpath_reset(skb); skb->dev = tunnel->dev; return 1; @@ -167,7 +175,7 @@ static netdev_tx_t vti_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) memset(&fl4, 0, sizeof(fl4)); flowi4_init_output(&fl4, tunnel->parms.link, - be32_to_cpu(tunnel->parms.i_key), RT_TOS(tos), + be32_to_cpu(tunnel->parms.o_key), RT_TOS(tos), RT_SCOPE_UNIVERSE, IPPROTO_IPIP, 0, dst, tiph->saddr, 0, 0); -- cgit v1.2.2 From cc23528db0300d5c8c0b98670a577bf1dc3e0e82 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 14:51:16 +0900 Subject: net: sh_eth: Correct fix for RX packet errors on R8A7740 Nguyen Hong Ky posted a patch to correct RX packet errors on R8A7740 which was applied as 2c6221e4a5aab417 ("net: sh_eth: Fix RX packets errors on R8A7740"). Unfortunately sh_eth.c contains many similar instances of struct sh_eth_cpu_data and the patch was miss-applied, updating sh7734_data instead of r8a7740_data. This patch corrects this problem by. 1. Reverting the change to sh7734_data and; 2. Applying the change to r8a7740_data. Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index c7e1b8f333ed..b57c278d3b46 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -620,16 +620,12 @@ static struct sh_eth_cpu_data sh7734_data = { .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, - .fdr_value = 0x0000070f, - .rmcr_value = 0x00000001, .apr = 1, .mpr = 1, .tpauser = 1, .bculr = 1, .hw_swap = 1, - .rpadir = 1, - .rpadir_value = 2 << 16, .no_trimd = 1, .no_ade = 1, .tsu = 1, @@ -692,12 +688,16 @@ static struct sh_eth_cpu_data r8a7740_data = { .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, + .fdr_value = 0x0000070f, + .rmcr_value = 0x00000001, .apr = 1, .mpr = 1, .tpauser = 1, .bculr = 1, .hw_swap = 1, + .rpadir = 1, + .rpadir_value = 2 << 16, .no_trimd = 1, .no_ade = 1, .tsu = 1, -- cgit v1.2.2 From 455cc32bf128e114455d11ad919321ab89a2c312 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Oct 2013 06:30:09 -0700 Subject: l2tp: must disable bh before calling l2tp_xmit_skb() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit François Cachereul made a very nice bug report and suspected the bh_lock_sock() / bh_unlok_sock() pair used in l2tp_xmit_skb() from process context was not good. This problem was added by commit 6af88da14ee284aaad6e4326da09a89191ab6165 ("l2tp: Fix locking in l2tp_core.c"). l2tp_eth_dev_xmit() runs from BH context, so we must disable BH from other l2tp_xmit_skb() users. [ 452.060011] BUG: soft lockup - CPU#1 stuck for 23s! [accel-pppd:6662] [ 452.061757] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core pppoe pppox ppp_generic slhc ipv6 ext3 mbcache jbd virtio_balloon xfs exportfs dm_mod virtio_blk ata_generic virtio_net floppy ata_piix libata virtio_pci virtio_ring virtio [last unloaded: scsi_wait_scan] [ 452.064012] CPU 1 [ 452.080015] BUG: soft lockup - CPU#2 stuck for 23s! [accel-pppd:6643] [ 452.080015] CPU 2 [ 452.080015] [ 452.080015] Pid: 6643, comm: accel-pppd Not tainted 3.2.46.mini #1 Bochs Bochs [ 452.080015] RIP: 0010:[] [] do_raw_spin_lock+0x17/0x1f [ 452.080015] RSP: 0018:ffff88007125fc18 EFLAGS: 00000293 [ 452.080015] RAX: 000000000000aba9 RBX: ffffffff811d0703 RCX: 0000000000000000 [ 452.080015] RDX: 00000000000000ab RSI: ffff8800711f6896 RDI: ffff8800745c8110 [ 452.080015] RBP: ffff88007125fc18 R08: 0000000000000020 R09: 0000000000000000 [ 452.080015] R10: 0000000000000000 R11: 0000000000000280 R12: 0000000000000286 [ 452.080015] R13: 0000000000000020 R14: 0000000000000240 R15: 0000000000000000 [ 452.080015] FS: 00007fdc0cc24700(0000) GS:ffff8800b6f00000(0000) knlGS:0000000000000000 [ 452.080015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 452.080015] CR2: 00007fdb054899b8 CR3: 0000000074404000 CR4: 00000000000006a0 [ 452.080015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 452.080015] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 452.080015] Process accel-pppd (pid: 6643, threadinfo ffff88007125e000, task ffff8800b27e6dd0) [ 452.080015] Stack: [ 452.080015] ffff88007125fc28 ffffffff81256559 ffff88007125fc98 ffffffffa01b2bd1 [ 452.080015] ffff88007125fc58 000000000000000c 00000000029490d0 0000009c71dbe25e [ 452.080015] 000000000000005c 000000080000000e 0000000000000000 ffff880071170600 [ 452.080015] Call Trace: [ 452.080015] [] _raw_spin_lock+0xe/0x10 [ 452.080015] [] l2tp_xmit_skb+0x189/0x4ac [l2tp_core] [ 452.080015] [] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp] [ 452.080015] [] __sock_sendmsg_nosec+0x22/0x24 [ 452.080015] [] sock_sendmsg+0xa1/0xb6 [ 452.080015] [] ? __schedule+0x5c1/0x616 [ 452.080015] [] ? __dequeue_signal+0xb7/0x10c [ 452.080015] [] ? fget_light+0x75/0x89 [ 452.080015] [] ? sockfd_lookup_light+0x20/0x56 [ 452.080015] [] sys_sendto+0x10c/0x13b [ 452.080015] [] system_call_fastpath+0x16/0x1b [ 452.080015] Code: 81 48 89 e5 72 0c 31 c0 48 81 ff 45 66 25 81 0f 92 c0 5d c3 55 b8 00 01 00 00 48 89 e5 f0 66 0f c1 07 0f b6 d4 38 d0 74 06 f3 90 <8a> 07 eb f6 5d c3 90 90 55 48 89 e5 9c 58 0f 1f 44 00 00 5d c3 [ 452.080015] Call Trace: [ 452.080015] [] _raw_spin_lock+0xe/0x10 [ 452.080015] [] l2tp_xmit_skb+0x189/0x4ac [l2tp_core] [ 452.080015] [] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp] [ 452.080015] [] __sock_sendmsg_nosec+0x22/0x24 [ 452.080015] [] sock_sendmsg+0xa1/0xb6 [ 452.080015] [] ? __schedule+0x5c1/0x616 [ 452.080015] [] ? __dequeue_signal+0xb7/0x10c [ 452.080015] [] ? fget_light+0x75/0x89 [ 452.080015] [] ? sockfd_lookup_light+0x20/0x56 [ 452.080015] [] sys_sendto+0x10c/0x13b [ 452.080015] [] system_call_fastpath+0x16/0x1b [ 452.064012] [ 452.064012] Pid: 6662, comm: accel-pppd Not tainted 3.2.46.mini #1 Bochs Bochs [ 452.064012] RIP: 0010:[] [] do_raw_spin_lock+0x19/0x1f [ 452.064012] RSP: 0018:ffff8800b6e83ba0 EFLAGS: 00000297 [ 452.064012] RAX: 000000000000aaa9 RBX: ffff8800b6e83b40 RCX: 0000000000000002 [ 452.064012] RDX: 00000000000000aa RSI: 000000000000000a RDI: ffff8800745c8110 [ 452.064012] RBP: ffff8800b6e83ba0 R08: 000000000000c802 R09: 000000000000001c [ 452.064012] R10: ffff880071096c4e R11: 0000000000000006 R12: ffff8800b6e83b18 [ 452.064012] R13: ffffffff8125d51e R14: ffff8800b6e83ba0 R15: ffff880072a589c0 [ 452.064012] FS: 00007fdc0b81e700(0000) GS:ffff8800b6e80000(0000) knlGS:0000000000000000 [ 452.064012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 452.064012] CR2: 0000000000625208 CR3: 0000000074404000 CR4: 00000000000006a0 [ 452.064012] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 452.064012] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 452.064012] Process accel-pppd (pid: 6662, threadinfo ffff88007129a000, task ffff8800744f7410) [ 452.064012] Stack: [ 452.064012] ffff8800b6e83bb0 ffffffff81256559 ffff8800b6e83bc0 ffffffff8121c64a [ 452.064012] ffff8800b6e83bf0 ffffffff8121ec7a ffff880072a589c0 ffff880071096c62 [ 452.064012] 0000000000000011 ffffffff81430024 ffff8800b6e83c80 ffffffff8121f276 [ 452.064012] Call Trace: [ 452.064012] [ 452.064012] [] _raw_spin_lock+0xe/0x10 [ 452.064012] [] spin_lock+0x9/0xb [ 452.064012] [] udp_queue_rcv_skb+0x186/0x269 [ 452.064012] [] __udp4_lib_rcv+0x297/0x4ae [ 452.064012] [] ? raw_rcv+0xe9/0xf0 [ 452.064012] [] udp_rcv+0x1a/0x1c [ 452.064012] [] ip_local_deliver_finish+0x12b/0x1a5 [ 452.064012] [] ip_local_deliver+0x53/0x84 [ 452.064012] [] ip_rcv_finish+0x2bc/0x2f3 [ 452.064012] [] ip_rcv+0x210/0x269 [ 452.064012] [] ? kvm_clock_get_cycles+0x9/0xb [ 452.064012] [] __netif_receive_skb+0x3a5/0x3f7 [ 452.064012] [] netif_receive_skb+0x57/0x5e [ 452.064012] [] ? __netdev_alloc_skb+0x1f/0x3b [ 452.064012] [] virtnet_poll+0x4ba/0x5a4 [virtio_net] [ 452.064012] [] net_rx_action+0x73/0x184 [ 452.064012] [] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core] [ 452.064012] [] __do_softirq+0xc3/0x1a8 [ 452.064012] [] ? ack_APIC_irq+0x10/0x12 [ 452.064012] [] ? _raw_spin_lock+0xe/0x10 [ 452.064012] [] call_softirq+0x1c/0x26 [ 452.064012] [] do_softirq+0x45/0x82 [ 452.064012] [] irq_exit+0x42/0x9c [ 452.064012] [] do_IRQ+0x8e/0xa5 [ 452.064012] [] common_interrupt+0x6e/0x6e [ 452.064012] [ 452.064012] [] ? kfree+0x8a/0xa3 [ 452.064012] [] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core] [ 452.064012] [] ? l2tp_xmit_skb+0x1dd/0x4ac [l2tp_core] [ 452.064012] [] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp] [ 452.064012] [] __sock_sendmsg_nosec+0x22/0x24 [ 452.064012] [] sock_sendmsg+0xa1/0xb6 [ 452.064012] [] ? __schedule+0x5c1/0x616 [ 452.064012] [] ? __dequeue_signal+0xb7/0x10c [ 452.064012] [] ? fget_light+0x75/0x89 [ 452.064012] [] ? sockfd_lookup_light+0x20/0x56 [ 452.064012] [] sys_sendto+0x10c/0x13b [ 452.064012] [] system_call_fastpath+0x16/0x1b [ 452.064012] Code: 89 e5 72 0c 31 c0 48 81 ff 45 66 25 81 0f 92 c0 5d c3 55 b8 00 01 00 00 48 89 e5 f0 66 0f c1 07 0f b6 d4 38 d0 74 06 f3 90 8a 07 f6 5d c3 90 90 55 48 89 e5 9c 58 0f 1f 44 00 00 5d c3 55 48 [ 452.064012] Call Trace: [ 452.064012] [] _raw_spin_lock+0xe/0x10 [ 452.064012] [] spin_lock+0x9/0xb [ 452.064012] [] udp_queue_rcv_skb+0x186/0x269 [ 452.064012] [] __udp4_lib_rcv+0x297/0x4ae [ 452.064012] [] ? raw_rcv+0xe9/0xf0 [ 452.064012] [] udp_rcv+0x1a/0x1c [ 452.064012] [] ip_local_deliver_finish+0x12b/0x1a5 [ 452.064012] [] ip_local_deliver+0x53/0x84 [ 452.064012] [] ip_rcv_finish+0x2bc/0x2f3 [ 452.064012] [] ip_rcv+0x210/0x269 [ 452.064012] [] ? kvm_clock_get_cycles+0x9/0xb [ 452.064012] [] __netif_receive_skb+0x3a5/0x3f7 [ 452.064012] [] netif_receive_skb+0x57/0x5e [ 452.064012] [] ? __netdev_alloc_skb+0x1f/0x3b [ 452.064012] [] virtnet_poll+0x4ba/0x5a4 [virtio_net] [ 452.064012] [] net_rx_action+0x73/0x184 [ 452.064012] [] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core] [ 452.064012] [] __do_softirq+0xc3/0x1a8 [ 452.064012] [] ? ack_APIC_irq+0x10/0x12 [ 452.064012] [] ? _raw_spin_lock+0xe/0x10 [ 452.064012] [] call_softirq+0x1c/0x26 [ 452.064012] [] do_softirq+0x45/0x82 [ 452.064012] [] irq_exit+0x42/0x9c [ 452.064012] [] do_IRQ+0x8e/0xa5 [ 452.064012] [] common_interrupt+0x6e/0x6e [ 452.064012] [] ? kfree+0x8a/0xa3 [ 452.064012] [] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core] [ 452.064012] [] ? l2tp_xmit_skb+0x1dd/0x4ac [l2tp_core] [ 452.064012] [] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp] [ 452.064012] [] __sock_sendmsg_nosec+0x22/0x24 [ 452.064012] [] sock_sendmsg+0xa1/0xb6 [ 452.064012] [] ? __schedule+0x5c1/0x616 [ 452.064012] [] ? __dequeue_signal+0xb7/0x10c [ 452.064012] [] ? fget_light+0x75/0x89 [ 452.064012] [] ? sockfd_lookup_light+0x20/0x56 [ 452.064012] [] sys_sendto+0x10c/0x13b [ 452.064012] [] system_call_fastpath+0x16/0x1b Reported-by: François Cachereul Tested-by: François Cachereul Signed-off-by: Eric Dumazet Cc: James Chapman Signed-off-by: David S. Miller --- net/l2tp/l2tp_ppp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 5ebee2ded9e9..8c46b271064a 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -353,7 +353,9 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh goto error_put_sess_tun; } + local_bh_disable(); l2tp_xmit_skb(session, skb, session->hdr_len); + local_bh_enable(); sock_put(ps->tunnel_sock); sock_put(sk); @@ -422,7 +424,9 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) skb->data[0] = ppph[0]; skb->data[1] = ppph[1]; + local_bh_disable(); l2tp_xmit_skb(session, skb, session->hdr_len); + local_bh_enable(); sock_put(sk_tun); sock_put(sk); -- cgit v1.2.2 From 638a52b801e40ed276ceb69b73579ad99365361a Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sun, 6 Oct 2013 15:15:33 -0700 Subject: netem: update backlog after drop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When packet is dropped from rb-tree netem the backlog statistic should also be updated. Reported-by: Сергеев Сергей Signed-off-by: Stephen Hemminger Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_netem.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index a6d788d45216..6b75b6733e8e 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -520,6 +520,7 @@ static unsigned int netem_drop(struct Qdisc *sch) skb->next = NULL; skb->prev = NULL; len = qdisc_pkt_len(skb); + sch->qstats.backlog -= len; kfree_skb(skb); } } -- cgit v1.2.2 From ff704050f2fc0f3382b5a70bba56a51a3feca79d Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sun, 6 Oct 2013 15:16:49 -0700 Subject: netem: free skb's in tree on reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Netem can leak memory because packets get stored in red-black tree and it is not cleared on reset. Reported by: Сергеев Сергей Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/sched/sch_netem.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 6b75b6733e8e..b87e83d07478 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -358,6 +358,21 @@ static psched_time_t packet_len_2_sched_time(unsigned int len, struct netem_sche return PSCHED_NS2TICKS(ticks); } +static void tfifo_reset(struct Qdisc *sch) +{ + struct netem_sched_data *q = qdisc_priv(sch); + struct rb_node *p; + + while ((p = rb_first(&q->t_root))) { + struct sk_buff *skb = netem_rb_to_skb(p); + + rb_erase(p, &q->t_root); + skb->next = NULL; + skb->prev = NULL; + kfree_skb(skb); + } +} + static void tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch) { struct netem_sched_data *q = qdisc_priv(sch); @@ -610,6 +625,7 @@ static void netem_reset(struct Qdisc *sch) struct netem_sched_data *q = qdisc_priv(sch); qdisc_reset_queue(sch); + tfifo_reset(sch); if (q->qdisc) qdisc_reset(q->qdisc); qdisc_watchdog_cancel(&q->watchdog); -- cgit v1.2.2 From bf58175954f2d390300df00f96070312d1b15096 Mon Sep 17 00:00:00 2001 From: Oussama Ghorbel Date: Thu, 10 Oct 2013 18:50:27 +0100 Subject: ipv6: Initialize ip6_tnl.hlen in gre tunnel even if no route is found The ip6_tnl.hlen (gre and ipv6 headers length) is independent from the outgoing interface, so it would be better to initialize it even when no route is found, otherwise its value will be zero. While I'm not sure if this could happen in real life, but doing that will avoid to call the skb_push function with a zero in ip6gre_header function. Suggested-by: Hannes Frederic Sowa Signed-off-by: Oussama Ghorbel Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 1ef1fa2b22a6..bf4a9a084de5 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -976,6 +976,7 @@ static void ip6gre_tnl_link_config(struct ip6_tnl *t, int set_mtu) if (t->parms.o_flags&GRE_SEQ) addend += 4; } + t->hlen = addend; if (p->flags & IP6_TNL_F_CAP_XMIT) { int strict = (ipv6_addr_type(&p->raddr) & @@ -1002,8 +1003,6 @@ static void ip6gre_tnl_link_config(struct ip6_tnl *t, int set_mtu) } ip6_rt_put(rt); } - - t->hlen = addend; } static int ip6gre_tnl_change(struct ip6_tnl *t, -- cgit v1.2.2 From 96b340406724d87e4621284ebac5e059d67b2194 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Salva=20Peir=C3=B3?= Date: Fri, 11 Oct 2013 12:50:03 +0300 Subject: farsync: fix info leak in ioctl The fst_get_iface() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/wan/farsync.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 3f0c4f268751..bcfff0d62de4 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -1972,6 +1972,7 @@ fst_get_iface(struct fst_card_info *card, struct fst_port_info *port, } i = port->index; + memset(&sync, 0, sizeof(sync)); sync.clock_rate = FST_RDL(card, portConfig[i].lineSpeed); /* Lucky card and linux use same encoding here */ sync.clock_type = FST_RDB(card, portConfig[i].internalClock) == -- cgit v1.2.2 From e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 11 Oct 2013 14:52:20 +0100 Subject: net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data SMC_outw invokes an endian-aware I/O accessor, which may change the data endianness before writing to the device. This is not suitable for data transfers where the memory buffer is simply a string of bytes that does not require any byte-swapping. This patches fixes the smc91x SMC_PUSH_DATA macro so that it uses the string I/O accessor for outputting the leading or trailing halfwords on halfword-aligned buffers. Cc: Cc: Nicolas Pitre Cc: David S. Miller Signed-off-by: Will Deacon Acked-by: Nicolas Pitre Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 5730fe2445a6..98eedb90cdc3 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -1124,8 +1124,7 @@ static const char * chip_ids[ 16 ] = { void __iomem *__ioaddr = ioaddr; \ if (__len >= 2 && (unsigned long)__ptr & 2) { \ __len -= 2; \ - SMC_outw(*(u16 *)__ptr, ioaddr, \ - DATA_REG(lp)); \ + SMC_outsw(ioaddr, DATA_REG(lp), __ptr, 1); \ __ptr += 2; \ } \ if (SMC_CAN_USE_DATACS && lp->datacs) \ @@ -1133,8 +1132,7 @@ static const char * chip_ids[ 16 ] = { SMC_outsl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \ if (__len & 2) { \ __ptr += (__len & ~3); \ - SMC_outw(*((u16 *)__ptr), ioaddr, \ - DATA_REG(lp)); \ + SMC_outsw(ioaddr, DATA_REG(lp), __ptr, 1); \ } \ } else if (SMC_16BIT(lp)) \ SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1); \ -- cgit v1.2.2 From f5563318ff1bde15b10e736e97ffce13be08bc1a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Oct 2013 14:47:05 +0200 Subject: wireless: radiotap: fix parsing buffer overrun When parsing an invalid radiotap header, the parser can overrun the buffer that is passed in because it doesn't correctly check 1) the minimum radiotap header size 2) the space for extended bitmaps The first issue doesn't affect any in-kernel user as they all check the minimum size before calling the radiotap function. The second issue could potentially affect the kernel if an skb is passed in that consists only of the radiotap header with a lot of extended bitmaps that extend past the SKB. In that case a read-only buffer overrun by at most 4 bytes is possible. Fix this by adding the appropriate checks to the parser. Cc: stable@vger.kernel.org Reported-by: Evan Huus Signed-off-by: Johannes Berg --- net/wireless/radiotap.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/wireless/radiotap.c b/net/wireless/radiotap.c index 7d604c06c3dc..a271c27fac77 100644 --- a/net/wireless/radiotap.c +++ b/net/wireless/radiotap.c @@ -97,6 +97,10 @@ int ieee80211_radiotap_iterator_init( struct ieee80211_radiotap_header *radiotap_header, int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns) { + /* check the radiotap header can actually be present */ + if (max_length < sizeof(struct ieee80211_radiotap_header)) + return -EINVAL; + /* Linux only supports version 0 radiotap format */ if (radiotap_header->it_version) return -EINVAL; @@ -131,7 +135,8 @@ int ieee80211_radiotap_iterator_init( */ if ((unsigned long)iterator->_arg - - (unsigned long)iterator->_rtheader > + (unsigned long)iterator->_rtheader + + sizeof(uint32_t) > (unsigned long)iterator->_max_length) return -EINVAL; } -- cgit v1.2.2 From d86aa4f8ca58898ec6a94c0635da20b948171ed7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Oct 2013 15:47:06 +0200 Subject: mac80211: fix crash if bitrate calculation goes wrong If a frame's timestamp is calculated, and the bitrate calculation goes wrong and returns zero, the system will attempt to divide by zero and crash. Catch this case and print the rate information that the driver reported when this happens. Cc: stable@vger.kernel.org Reported-by: Thomas Lindroth Signed-off-by: Johannes Berg --- net/mac80211/util.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 9c3200bcfc02..69e4ef5348a0 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2238,6 +2238,10 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local, } rate = cfg80211_calculate_bitrate(&ri); + if (WARN_ONCE(!rate, + "Invalid bitrate: flags=0x%x, idx=%d, vht_nss=%d\n", + status->flag, status->rate_idx, status->vht_nss)) + return 0; /* rewind from end of MPDU */ if (status->flag & RX_FLAG_MACTIME_END) -- cgit v1.2.2 From e8041ceeded8a0f68cc0c75faf911e4369bba89f Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 11 Oct 2013 18:31:31 -0700 Subject: mwifiex: inform cfg80211 about disconnect if device is removed If device is surprise removed, commands sent to FW including deauthenticate command fail as bus writes fail. We update our media_connected status to false and inform cfg80211 about disconnection only when command is successful. Since cfg80211 assumes device is still connected, it results into following WARN_ON during unload: WARNING: CPU: 0 PID: 18245 at net/wireless/core.c:937 cfg80211_netdev_notifier_call+0x175/0x4d0 [cfg80211]() Avoid this by emitting cfg80211_disconnected event even if the deauthenticate command fails. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/join.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 9d7c0e6c4fc7..37f873bb342f 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -1422,13 +1422,19 @@ static int mwifiex_deauthenticate_infra(struct mwifiex_private *priv, u8 *mac) */ int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac) { + int ret = 0; + if (!priv->media_connected) return 0; switch (priv->bss_mode) { case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_P2P_CLIENT: - return mwifiex_deauthenticate_infra(priv, mac); + ret = mwifiex_deauthenticate_infra(priv, mac); + if (ret) + cfg80211_disconnected(priv->netdev, 0, NULL, 0, + GFP_KERNEL); + break; case NL80211_IFTYPE_ADHOC: return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_AD_HOC_STOP, @@ -1440,7 +1446,7 @@ int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac) break; } - return 0; + return ret; } EXPORT_SYMBOL_GPL(mwifiex_deauthenticate); -- cgit v1.2.2 From 9612bd1ee3e3136e4748d7175bb6e7551482cc2e Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 11 Oct 2013 18:31:32 -0700 Subject: mwifiex: inform cfg80211 about disconnect for P2P client interface This patch adds missing cfg80211_disconnected event for P2P client interface upon successful deauthenticate command, deauthenticate event or disassociate event from FW. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sta_event.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c index 8b057524b252..8c351f71f72f 100644 --- a/drivers/net/wireless/mwifiex/sta_event.c +++ b/drivers/net/wireless/mwifiex/sta_event.c @@ -118,7 +118,8 @@ mwifiex_reset_connect_state(struct mwifiex_private *priv, u16 reason_code) dev_dbg(adapter->dev, "info: successfully disconnected from %pM: reason code %d\n", priv->cfg_bssid, reason_code); - if (priv->bss_mode == NL80211_IFTYPE_STATION) { + if (priv->bss_mode == NL80211_IFTYPE_STATION || + priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) { cfg80211_disconnected(priv->netdev, reason_code, NULL, 0, GFP_KERNEL); } -- cgit v1.2.2 From 6649b205ab1234c7b0ffbfba769f0604810c8ce2 Mon Sep 17 00:00:00 2001 From: Nikita Kiryanov Date: Wed, 16 Oct 2013 11:41:31 +0300 Subject: dm9000: during init reset phy only for dm9000b Some of the changes introduced in commit 6741f40 (DM9000B: driver initialization upgrade) break functionality on DM9000A (error message during NFS boot: "dm9000 dm9000.0: eth0: link down") Since the changes were meant to serve only DM9000B, make them dependent on the chip type. Cc: David S. Miller Cc: Jingoo Han Cc: Mugunthan V N Signed-off-by: Nikita Kiryanov Signed-off-by: Igor Grinberg Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 5f5896e522d2..912983b39492 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -891,8 +891,13 @@ dm9000_init_dm9000(struct net_device *dev) iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ - dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ - dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */ + /* If we are dealing with DM9000B, some extra steps are required: a + * manual phy reset, and setting init params. + */ + if (db->type == TYPE_DM9000B) { + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); + dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); + } ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; -- cgit v1.2.2 From 677d7d28686e468b4940c573ab2a01b198084bc4 Mon Sep 17 00:00:00 2001 From: Nikita Kiryanov Date: Wed, 16 Oct 2013 11:41:32 +0300 Subject: dm9000: take phy out of reset during init Take the phy out of reset explicitly during system resume to avoid losing network connectivity. Cc: David S. Miller Cc: Jingoo Han Cc: Mugunthan V N Signed-off-by: Nikita Kiryanov Signed-off-by: Igor Grinberg Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 912983b39492..3f650ce10cf4 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -890,6 +890,7 @@ dm9000_init_dm9000(struct net_device *dev) (dev->features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0); iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + iow(db, DM9000_GPR, 0); /* If we are dealing with DM9000B, some extra steps are required: a * manual phy reset, and setting init params. -- cgit v1.2.2 From 09ee9f87d02e779e4fc3f5c29212c733d6d6e349 Mon Sep 17 00:00:00 2001 From: Michael Abbott Date: Wed, 16 Oct 2013 11:41:33 +0300 Subject: dm9000: Implement full reset of DM9000 network device A Davicom application note for the DM9000 network device recommends performing software reset twice to correctly initialise the device. Without this reset some devices fail to initialise correctly on system startup. Cc: David S. Miller Cc: Jingoo Han Cc: Mugunthan V N Signed-off-by: Michael Abbott Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 3f650ce10cf4..a179f8150034 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -158,18 +158,6 @@ static inline board_info_t *to_dm9000_board(struct net_device *dev) /* DM9000 network board routine ---------------------------- */ -static void -dm9000_reset(board_info_t * db) -{ - dev_dbg(db->dev, "resetting device\n"); - - /* RESET device */ - writeb(DM9000_NCR, db->io_addr); - udelay(200); - writeb(NCR_RST, db->io_data); - udelay(200); -} - /* * Read a byte from I/O port */ @@ -191,6 +179,27 @@ iow(board_info_t * db, int reg, int value) writeb(value, db->io_data); } +static void +dm9000_reset(board_info_t *db) +{ + dev_dbg(db->dev, "resetting device\n"); + + /* Reset DM9000, see DM9000 Application Notes V1.22 Jun 11, 2004 page 29 + * The essential point is that we have to do a double reset, and the + * instruction is to set LBK into MAC internal loopback mode. + */ + iow(db, DM9000_NCR, 0x03); + udelay(100); /* Application note says at least 20 us */ + if (ior(db, DM9000_NCR) & 1) + dev_err(db->dev, "dm9000 did not respond to first reset\n"); + + iow(db, DM9000_NCR, 0); + iow(db, DM9000_NCR, 0x03); + udelay(100); + if (ior(db, DM9000_NCR) & 1) + dev_err(db->dev, "dm9000 did not respond to second reset\n"); +} + /* routines for sending block to chip */ static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count) -- cgit v1.2.2 From 727a282fdb9bc1545542095def45a84d0480f78e Mon Sep 17 00:00:00 2001 From: Nikita Kiryanov Date: Wed, 16 Oct 2013 11:41:34 +0300 Subject: dm9000: report the correct LPA Report the LPA by checking mii_if_info, instead of just saying "no LPA" every time. Cc: David S. Miller Cc: Jingoo Han Cc: Mugunthan V N Signed-off-by: Nikita Kiryanov Signed-off-by: Igor Grinberg Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index a179f8150034..a7a941b1a655 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -753,15 +753,20 @@ static const struct ethtool_ops dm9000_ethtool_ops = { static void dm9000_show_carrier(board_info_t *db, unsigned carrier, unsigned nsr) { + int lpa; struct net_device *ndev = db->ndev; + struct mii_if_info *mii = &db->mii; unsigned ncr = dm9000_read_locked(db, DM9000_NCR); - if (carrier) - dev_info(db->dev, "%s: link up, %dMbps, %s-duplex, no LPA\n", + if (carrier) { + lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA); + dev_info(db->dev, + "%s: link up, %dMbps, %s-duplex, lpa 0x%04X\n", ndev->name, (nsr & NSR_SPEED) ? 10 : 100, - (ncr & NCR_FDX) ? "full" : "half"); - else + (ncr & NCR_FDX) ? "full" : "half", lpa); + } else { dev_info(db->dev, "%s: link down\n", ndev->name); + } } static void -- cgit v1.2.2 From e87b3998d795123b4139bc3f25490dd236f68212 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 15 Oct 2013 22:01:29 -0400 Subject: net: dst: provide accessor function to dst->xfrm dst->xfrm is conditionally defined. Provide accessor funtion that is always available. Signed-off-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller --- include/net/dst.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/net/dst.h b/include/net/dst.h index 3bc4865f8267..3c4c944096c9 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -479,10 +479,22 @@ static inline struct dst_entry *xfrm_lookup(struct net *net, { return dst_orig; } + +static inline struct xfrm_state *dst_xfrm(const struct dst_entry *dst) +{ + return NULL; +} + #else extern struct dst_entry *xfrm_lookup(struct net *net, struct dst_entry *dst_orig, const struct flowi *fl, struct sock *sk, int flags); + +/* skb attached with this dst needs transformation if dst->xfrm is valid */ +static inline struct xfrm_state *dst_xfrm(const struct dst_entry *dst) +{ + return dst->xfrm; +} #endif #endif /* _NET_DST_H */ -- cgit v1.2.2 From 27127a82561a2a3ed955ce207048e1b066a80a2a Mon Sep 17 00:00:00 2001 From: Fan Du Date: Tue, 15 Oct 2013 22:01:30 -0400 Subject: sctp: Use software crc32 checksum when xfrm transform will happen. igb/ixgbe have hardware sctp checksum support, when this feature is enabled and also IPsec is armed to protect sctp traffic, ugly things happened as xfrm_output checks CHECKSUM_PARTIAL to do checksum operation(sum every thing up and pack the 16bits result in the checksum field). The result is fail establishment of sctp communication. Cc: Neil Horman Cc: Steffen Klassert Signed-off-by: Fan Du Signed-off-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/output.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sctp/output.c b/net/sctp/output.c index 0ac3a65daccb..d35b54cb3020 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -536,7 +536,8 @@ int sctp_packet_transmit(struct sctp_packet *packet) * by CRC32-C as described in . */ if (!sctp_checksum_disable) { - if (!(dst->dev->features & NETIF_F_SCTP_CSUM)) { + if (!(dst->dev->features & NETIF_F_SCTP_CSUM) || + (dst_xfrm(dst) != NULL)) { __u32 crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len); /* 3) Put the resultant value into the checksum field in the -- cgit v1.2.2 From d2dbbba77e95dff4b4f901fee236fef6d9552072 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 15 Oct 2013 22:01:31 -0400 Subject: sctp: Perform software checksum if packet has to be fragmented. IP/IPv6 fragmentation knows how to compute only TCP/UDP checksum. This causes problems if SCTP packets has to be fragmented and ipsummed has been set to PARTIAL due to checksum offload support. This condition can happen when retransmitting after MTU discover, or when INIT or other control chunks are larger then MTU. Check for the rare fragmentation condition in SCTP and use software checksum calculation in this case. CC: Fan Du Signed-off-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/output.c b/net/sctp/output.c index d35b54cb3020..319137340d15 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -537,7 +537,7 @@ int sctp_packet_transmit(struct sctp_packet *packet) */ if (!sctp_checksum_disable) { if (!(dst->dev->features & NETIF_F_SCTP_CSUM) || - (dst_xfrm(dst) != NULL)) { + (dst_xfrm(dst) != NULL) || packet->ipfragok) { __u32 crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len); /* 3) Put the resultant value into the checksum field in the -- cgit v1.2.2 From 09b69024d97356fb660d1162e172ed4f1be7ceae Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 12 Oct 2013 14:24:08 +0800 Subject: usbnet: fix error return code in usbnet_probe() Fix to return -ENOMEM in the padding pkt alloc fail error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index bf94e10a37c8..90a429b7ebad 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1688,8 +1688,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) && !(info->flags & FLAG_MULTI_PACKET)) { dev->padding_pkt = kzalloc(1, GFP_KERNEL); - if (!dev->padding_pkt) + if (!dev->padding_pkt) { + status = -ENOMEM; goto out4; + } } status = register_netdev (net); -- cgit v1.2.2 From 031afe4990a7c9dbff41a3a742c44d3e740ea0a1 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Sat, 12 Oct 2013 10:16:27 -0700 Subject: tcp: fix incorrect ca_state in tail loss probe On receiving an ACK that covers the loss probe sequence, TLP immediately sets the congestion state to Open, even though some packets are not recovered and retransmisssion are on the way. The later ACks may trigger a WARN_ON check in step D of tcp_fastretrans_alert(), e.g., https://bugzilla.redhat.com/show_bug.cgi?id=989251 The fix is to follow the similar procedure in recovery by calling tcp_try_keep_open(). The sender switches to Open state if no packets are retransmissted. Otherwise it goes to Disorder and let subsequent ACKs move the state to Recovery or Open. Reported-By: Michael Sterrett Tested-By: Dormando Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 113dc5f17d47..53974c7c04fe 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3291,7 +3291,7 @@ static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag) tcp_init_cwnd_reduction(sk, true); tcp_set_ca_state(sk, TCP_CA_CWR); tcp_end_cwnd_reduction(sk); - tcp_set_ca_state(sk, TCP_CA_Open); + tcp_try_keep_open(sk); NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPLOSSPROBERECOVERY); } -- cgit v1.2.2 From 60e66fee56b2256dcb1dc2ea1b2ddcb6e273857d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 12 Oct 2013 14:08:34 -0700 Subject: bnx2x: record rx queue for LRO packets RPS support is kind of broken on bnx2x, because only non LRO packets get proper rx queue information. This triggers reorders, as it seems bnx2x like to generate a non LRO packet for segment including TCP PUSH flag : (this might be pure coincidence, but all the reorders I've seen involve segments with a PUSH) 11:13:34.335847 IP A > B: . 415808:447136(31328) ack 1 win 457 11:13:34.335992 IP A > B: . 447136:448560(1424) ack 1 win 457 11:13:34.336391 IP A > B: . 448560:479888(31328) ack 1 win 457 11:13:34.336425 IP A > B: P 511216:512640(1424) ack 1 win 457 11:13:34.336423 IP A > B: . 479888:511216(31328) ack 1 win 457 11:13:34.336924 IP A > B: . 512640:543968(31328) ack 1 win 457 11:13:34.336963 IP A > B: . 543968:575296(31328) ack 1 win 457 We must call skb_record_rx_queue() to properly give to RPS (and more generally for TX queue selection on forward path) the receive queue information. Similar fix is needed for skb_mark_napi_id(), but will be handled in a separate patch to ease stable backports. Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eilon Greenstein Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e66beff2704d..4ab4c89c60cd 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -681,6 +681,7 @@ static void bnx2x_gro_receive(struct bnx2x *bp, struct bnx2x_fastpath *fp, } } #endif + skb_record_rx_queue(skb, fp->rx_queue); napi_gro_receive(&fp->napi, skb); } -- cgit v1.2.2 From dbbd2ad89bb1f86b94b23bb2e56d4935717f9b94 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sun, 13 Oct 2013 21:17:01 +0200 Subject: net/ethernet: cpsw: Bugfix interrupts before enabling napi If interrupts happen before napi_enable was called, the driver will not work as expected. Network transmissions are impossible in this state. This bug can be reproduced easily by restarting the network interface in a loop. After some time any network transmissions on the network interface will fail. This patch fixes the bug by enabling napi before enabling the network interface interrupts. Signed-off-by: Markus Pargmann Acked-by: Peter Korsgaard Acked-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 804846eb5fc2..fccd9d4d4ae0 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1169,9 +1169,9 @@ static int cpsw_ndo_open(struct net_device *ndev) } } + napi_enable(&priv->napi); cpdma_ctlr_start(priv->dma); cpsw_intr_enable(priv); - napi_enable(&priv->napi); cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX); cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX); -- cgit v1.2.2 From 9e5f1721907fcfbd4b575bcafa0314188f7330a5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 14 Oct 2013 15:28:38 +0300 Subject: yam: integer underflow in yam_ioctl() We cap bitrate at YAM_MAXBITRATE in yam_ioctl(), but it could also be negative. I don't know the impact of using a negative bitrate but let's prevent it. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- include/linux/yam.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/yam.h b/include/linux/yam.h index 7fe28228b274..512cdc2fb80f 100644 --- a/include/linux/yam.h +++ b/include/linux/yam.h @@ -77,6 +77,6 @@ struct yamdrv_ioctl_cfg { struct yamdrv_ioctl_mcs { int cmd; - int bitrate; + unsigned int bitrate; unsigned char bits[YAM_FPGA_SIZE]; }; -- cgit v1.2.2 From 39bb93f88c5db54cbe1df0b0aa957b3a8f2227ed Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 14 Oct 2013 15:46:15 +0300 Subject: yam: remove a no-op in yam_ioctl() We overwrite the ->bitrate with the user supplied information on the next line. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/hamradio/yam.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c index 0721e72f9299..5af1c3e5032a 100644 --- a/drivers/net/hamradio/yam.c +++ b/drivers/net/hamradio/yam.c @@ -975,7 +975,6 @@ static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) return -EINVAL; /* Cannot change this parameter when up */ if ((ym = kmalloc(sizeof(struct yamdrv_ioctl_mcs), GFP_KERNEL)) == NULL) return -ENOBUFS; - ym->bitrate = 9600; if (copy_from_user(ym, ifr->ifr_data, sizeof(struct yamdrv_ioctl_mcs))) { kfree(ym); return -EFAULT; -- cgit v1.2.2 From 3ab098df35f8b98b6553edc2e40234af512ba877 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 15 Oct 2013 11:18:58 +0800 Subject: virtio-net: don't respond to cpu hotplug notifier if we're not ready We're trying to re-configure the affinity unconditionally in cpu hotplug callback. This may lead the issue during resuming from s3/s4 since - virt queues haven't been allocated at that time. - it's unnecessary since thaw method will re-configure the affinity. Fix this issue by checking the config_enable and do nothing is we're not ready. The bug were introduced by commit 8de4b2f3ae90c8fc0f17eeaab87d5a951b66ee17 (virtio-net: reset virtqueue affinity when doing cpu hotplug). Cc: Rusty Russell Cc: Michael S. Tsirkin Cc: Wanlong Gao Acked-by: Michael S. Tsirkin Reviewed-by: Wanlong Gao Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index defec2b3c5a4..c4bc1cc7ef33 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1116,6 +1116,11 @@ static int virtnet_cpu_callback(struct notifier_block *nfb, { struct virtnet_info *vi = container_of(nfb, struct virtnet_info, nb); + mutex_lock(&vi->config_lock); + + if (!vi->config_enable) + goto done; + switch(action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: case CPU_DOWN_FAILED: @@ -1128,6 +1133,9 @@ static int virtnet_cpu_callback(struct notifier_block *nfb, default: break; } + +done: + mutex_unlock(&vi->config_lock); return NOTIFY_OK; } -- cgit v1.2.2 From 35ed159bfd96a7547ec277ed8b550c7cbd9841b6 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 15 Oct 2013 11:18:59 +0800 Subject: virtio-net: refill only when device is up during setting queues We used to schedule the refill work unconditionally after changing the number of queues. This may lead an issue if the device is not up. Since we only try to cancel the work in ndo_stop(), this may cause the refill work still work after removing the device. Fix this by only schedule the work when device is up. The bug were introduce by commit 9b9cd8024a2882e896c65222aa421d461354e3f2. (virtio-net: fix the race between channels setting and refill) Cc: Rusty Russell Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index c4bc1cc7ef33..9fbdfcd1e1a0 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -938,7 +938,9 @@ static int virtnet_set_queues(struct virtnet_info *vi, u16 queue_pairs) return -EINVAL; } else { vi->curr_queue_pairs = queue_pairs; - schedule_delayed_work(&vi->refill, 0); + /* virtnet_open() will refill when device is going to up. */ + if (dev->flags & IFF_UP) + schedule_delayed_work(&vi->refill, 0); } return 0; @@ -1741,7 +1743,9 @@ static int virtnet_restore(struct virtio_device *vdev) vi->config_enable = true; mutex_unlock(&vi->config_lock); + rtnl_lock(); virtnet_set_queues(vi, vi->curr_queue_pairs); + rtnl_unlock(); return 0; } -- cgit v1.2.2 From ce97fef4235378108ed3bd96e1b3eab8fd0a1fbd Mon Sep 17 00:00:00 2001 From: Enrico Mioso Date: Tue, 15 Oct 2013 15:06:48 +0200 Subject: net: qmi_wwan: Olivetti Olicard 200 support This is a QMI device, manufactured by TCT Mobile Phones. A companion patch blacklisting this device's QMI interface in the option.c driver has been sent. Signed-off-by: Enrico Mioso Signed-off-by: Antonella Pellizzari Tested-by: Dan Williams Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3d6aaf79d8b2..818ce90185b5 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -714,6 +714,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ + {QMI_FIXED_INTF(0x0b3c, 0xc005, 6)}, /* Olivetti Olicard 200 */ {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */ /* 4. Gobi 1000 devices */ -- cgit v1.2.2 From c52e2421f7368fd36cbe330d2cf41b10452e39a9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 15 Oct 2013 11:54:30 -0700 Subject: tcp: must unclone packets before mangling them TCP stack should make sure it owns skbs before mangling them. We had various crashes using bnx2x, and it turned out gso_size was cleared right before bnx2x driver was populating TC descriptor of the _previous_ packet send. TCP stack can sometime retransmit packets that are still in Qdisc. Of course we could make bnx2x driver more robust (using ACCESS_ONCE(shinfo->gso_size) for example), but the bug is TCP stack. We have identified two points where skb_unclone() was needed. This patch adds a WARN_ON_ONCE() to warn us if we missed another fix of this kind. Kudos to Neal for finding the root cause of this bug. Its visible using small MSS. Signed-off-by: Eric Dumazet Signed-off-by: Neal Cardwell Cc: Yuchung Cheng Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index c6f01f2cdb32..8fad1c155688 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -986,6 +986,9 @@ static void tcp_queue_skb(struct sock *sk, struct sk_buff *skb) static void tcp_set_skb_tso_segs(const struct sock *sk, struct sk_buff *skb, unsigned int mss_now) { + /* Make sure we own this skb before messing gso_size/gso_segs */ + WARN_ON_ONCE(skb_cloned(skb)); + if (skb->len <= mss_now || !sk_can_gso(sk) || skb->ip_summed == CHECKSUM_NONE) { /* Avoid the costly divide in the normal @@ -1067,9 +1070,7 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, if (nsize < 0) nsize = 0; - if (skb_cloned(skb) && - skb_is_nonlinear(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + if (skb_unclone(skb, GFP_ATOMIC)) return -ENOMEM; /* Get a new skb... force flag on. */ @@ -2344,6 +2345,8 @@ int __tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb) int oldpcount = tcp_skb_pcount(skb); if (unlikely(oldpcount > 1)) { + if (skb_unclone(skb, GFP_ATOMIC)) + return -ENOMEM; tcp_init_tso_segs(sk, skb, cur_mss); tcp_adjust_pcount(sk, skb, oldpcount - tcp_skb_pcount(skb)); } -- cgit v1.2.2 From 8f26fb1c1ed81c33f5d87c5936f4d9d1b4118918 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 15 Oct 2013 12:24:54 -0700 Subject: tcp: remove the sk_can_gso() check from tcp_set_skb_tso_segs() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit sk_can_gso() should only be used as a hint in tcp_sendmsg() to build GSO packets in the first place. (As a performance hint) Once we have GSO packets in write queue, we can not decide they are no longer GSO only because flow now uses a route which doesn't handle TSO/GSO. Core networking stack handles the case very well for us, all we need is keeping track of packet counts in MSS terms, regardless of segmentation done later (in GSO or hardware) Right now, if tcp_fragment() splits a GSO packet in two parts, @left and @right, and route changed through a non GSO device, both @left and @right have pcount set to 1, which is wrong, and leads to incorrect packet_count tracking. This problem was added in commit d5ac99a648 ("[TCP]: skb pcount with MTU discovery") Signed-off-by: Eric Dumazet Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Reported-by: Maciej Żenczykowski Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 8fad1c155688..d46f2143305c 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -989,8 +989,7 @@ static void tcp_set_skb_tso_segs(const struct sock *sk, struct sk_buff *skb, /* Make sure we own this skb before messing gso_size/gso_segs */ WARN_ON_ONCE(skb_cloned(skb)); - if (skb->len <= mss_now || !sk_can_gso(sk) || - skb->ip_summed == CHECKSUM_NONE) { + if (skb->len <= mss_now || skb->ip_summed == CHECKSUM_NONE) { /* Avoid the costly divide in the normal * non-TSO case. */ -- cgit v1.2.2 From 4b6c7879d84ad06a2ac5b964808ed599187a188d Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 15 Oct 2013 14:57:45 -0400 Subject: bridge: Correctly clamp MAX forward_delay when enabling STP Commit be4f154d5ef0ca147ab6bcd38857a774133f5450 bridge: Clamp forward_delay when enabling STP had a typo when attempting to clamp maximum forward delay. It is possible to set bridge_forward_delay to be higher then permitted maximum when STP is off. When turning STP on, the higher then allowed delay has to be clamed down to max value. CC: Herbert Xu CC: Stephen Hemminger Signed-off-by: Vlad Yasevich Reviewed-by: Veaceslav Falico Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/bridge/br_stp_if.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c index 108084a04671..656a6f3e40de 100644 --- a/net/bridge/br_stp_if.c +++ b/net/bridge/br_stp_if.c @@ -134,7 +134,7 @@ static void br_stp_start(struct net_bridge *br) if (br->bridge_forward_delay < BR_MIN_FORWARD_DELAY) __br_set_forward_delay(br, BR_MIN_FORWARD_DELAY); - else if (br->bridge_forward_delay < BR_MAX_FORWARD_DELAY) + else if (br->bridge_forward_delay > BR_MAX_FORWARD_DELAY) __br_set_forward_delay(br, BR_MAX_FORWARD_DELAY); if (r == 0) { -- cgit v1.2.2 From 8adff41c3d259eb5e313b7b04669eee545925154 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Wed, 16 Oct 2013 17:07:13 +0900 Subject: bridge: Don't use VID 0 and 4095 in vlan filtering IEEE 802.1Q says that: - VID 0 shall not be configured as a PVID, or configured in any Filtering Database entry. - VID 4095 shall not be configured as a PVID, or transmitted in a tag header. This VID value may be used to indicate a wildcard match for the VID in management operations or Filtering Database entries. (See IEEE 802.1Q-2011 6.9.1 and Table 9-2) Don't accept adding these VIDs in the vlan_filtering implementation. Signed-off-by: Toshiaki Makita Reviewed-by: Vlad Yasevich Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_fdb.c | 4 +- net/bridge/br_netlink.c | 2 +- net/bridge/br_vlan.c | 97 +++++++++++++++++++++++-------------------------- 3 files changed, 49 insertions(+), 54 deletions(-) diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c index ffd5874f2592..33e8f23acddd 100644 --- a/net/bridge/br_fdb.c +++ b/net/bridge/br_fdb.c @@ -700,7 +700,7 @@ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], vid = nla_get_u16(tb[NDA_VLAN]); - if (vid >= VLAN_N_VID) { + if (!vid || vid >= VLAN_VID_MASK) { pr_info("bridge: RTM_NEWNEIGH with invalid vlan id %d\n", vid); return -EINVAL; @@ -794,7 +794,7 @@ int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[], vid = nla_get_u16(tb[NDA_VLAN]); - if (vid >= VLAN_N_VID) { + if (!vid || vid >= VLAN_VID_MASK) { pr_info("bridge: RTM_NEWNEIGH with invalid vlan id %d\n", vid); return -EINVAL; diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index e74ddc1c29a8..f75d92e4f96b 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -243,7 +243,7 @@ static int br_afspec(struct net_bridge *br, vinfo = nla_data(tb[IFLA_BRIDGE_VLAN_INFO]); - if (vinfo->vid >= VLAN_N_VID) + if (!vinfo->vid || vinfo->vid >= VLAN_VID_MASK) return -EINVAL; switch (cmd) { diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 9a9ffe7e4019..21b6d217872b 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -45,37 +45,34 @@ static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags) return 0; } - if (vid) { - if (v->port_idx) { - p = v->parent.port; - br = p->br; - dev = p->dev; - } else { - br = v->parent.br; - dev = br->dev; - } - ops = dev->netdev_ops; - - if (p && (dev->features & NETIF_F_HW_VLAN_CTAG_FILTER)) { - /* Add VLAN to the device filter if it is supported. - * Stricly speaking, this is not necessary now, since - * devices are made promiscuous by the bridge, but if - * that ever changes this code will allow tagged - * traffic to enter the bridge. - */ - err = ops->ndo_vlan_rx_add_vid(dev, htons(ETH_P_8021Q), - vid); - if (err) - return err; - } - - err = br_fdb_insert(br, p, dev->dev_addr, vid); - if (err) { - br_err(br, "failed insert local address into bridge " - "forwarding table\n"); - goto out_filt; - } + if (v->port_idx) { + p = v->parent.port; + br = p->br; + dev = p->dev; + } else { + br = v->parent.br; + dev = br->dev; + } + ops = dev->netdev_ops; + + if (p && (dev->features & NETIF_F_HW_VLAN_CTAG_FILTER)) { + /* Add VLAN to the device filter if it is supported. + * Stricly speaking, this is not necessary now, since + * devices are made promiscuous by the bridge, but if + * that ever changes this code will allow tagged + * traffic to enter the bridge. + */ + err = ops->ndo_vlan_rx_add_vid(dev, htons(ETH_P_8021Q), + vid); + if (err) + return err; + } + err = br_fdb_insert(br, p, dev->dev_addr, vid); + if (err) { + br_err(br, "failed insert local address into bridge " + "forwarding table\n"); + goto out_filt; } set_bit(vid, v->vlan_bitmap); @@ -98,7 +95,7 @@ static int __vlan_del(struct net_port_vlans *v, u16 vid) __vlan_delete_pvid(v, vid); clear_bit(vid, v->untagged_bitmap); - if (v->port_idx && vid) { + if (v->port_idx) { struct net_device *dev = v->parent.port->dev; const struct net_device_ops *ops = dev->netdev_ops; @@ -248,7 +245,9 @@ bool br_allowed_egress(struct net_bridge *br, return false; } -/* Must be protected by RTNL */ +/* Must be protected by RTNL. + * Must be called with vid in range from 1 to 4094 inclusive. + */ int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags) { struct net_port_vlans *pv = NULL; @@ -278,7 +277,9 @@ out: return err; } -/* Must be protected by RTNL */ +/* Must be protected by RTNL. + * Must be called with vid in range from 1 to 4094 inclusive. + */ int br_vlan_delete(struct net_bridge *br, u16 vid) { struct net_port_vlans *pv; @@ -289,14 +290,9 @@ int br_vlan_delete(struct net_bridge *br, u16 vid) if (!pv) return -EINVAL; - if (vid) { - /* If the VID !=0 remove fdb for this vid. VID 0 is special - * in that it's the default and is always there in the fdb. - */ - spin_lock_bh(&br->hash_lock); - fdb_delete_by_addr(br, br->dev->dev_addr, vid); - spin_unlock_bh(&br->hash_lock); - } + spin_lock_bh(&br->hash_lock); + fdb_delete_by_addr(br, br->dev->dev_addr, vid); + spin_unlock_bh(&br->hash_lock); __vlan_del(pv, vid); return 0; @@ -329,7 +325,9 @@ unlock: return 0; } -/* Must be protected by RTNL */ +/* Must be protected by RTNL. + * Must be called with vid in range from 1 to 4094 inclusive. + */ int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags) { struct net_port_vlans *pv = NULL; @@ -363,7 +361,9 @@ clean_up: return err; } -/* Must be protected by RTNL */ +/* Must be protected by RTNL. + * Must be called with vid in range from 1 to 4094 inclusive. + */ int nbp_vlan_delete(struct net_bridge_port *port, u16 vid) { struct net_port_vlans *pv; @@ -374,14 +374,9 @@ int nbp_vlan_delete(struct net_bridge_port *port, u16 vid) if (!pv) return -EINVAL; - if (vid) { - /* If the VID !=0 remove fdb for this vid. VID 0 is special - * in that it's the default and is always there in the fdb. - */ - spin_lock_bh(&port->br->hash_lock); - fdb_delete_by_addr(port->br, port->dev->dev_addr, vid); - spin_unlock_bh(&port->br->hash_lock); - } + spin_lock_bh(&port->br->hash_lock); + fdb_delete_by_addr(port->br, port->dev->dev_addr, vid); + spin_unlock_bh(&port->br->hash_lock); return __vlan_del(pv, vid); } -- cgit v1.2.2 From b90356ce17c2b199cd55530cb9c3cfabe18dbdc3 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Wed, 16 Oct 2013 17:07:14 +0900 Subject: bridge: Apply the PVID to priority-tagged frames IEEE 802.1Q says that when we receive priority-tagged (VID 0) frames use the PVID for the port as its VID. (See IEEE 802.1Q-2011 6.9.1 and Table 9-2) Apply the PVID to not only untagged frames but also priority-tagged frames. Signed-off-by: Toshiaki Makita Reviewed-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/bridge/br_vlan.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 21b6d217872b..5a9c44a0c306 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -189,6 +189,8 @@ out: bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, struct sk_buff *skb, u16 *vid) { + int err; + /* If VLAN filtering is disabled on the bridge, all packets are * permitted. */ @@ -201,20 +203,31 @@ bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, if (!v) return false; - if (br_vlan_get_tag(skb, vid)) { + err = br_vlan_get_tag(skb, vid); + if (!*vid) { u16 pvid = br_get_pvid(v); - /* Frame did not have a tag. See if pvid is set - * on this port. That tells us which vlan untagged - * traffic belongs to. + /* Frame had a tag with VID 0 or did not have a tag. + * See if pvid is set on this port. That tells us which + * vlan untagged or priority-tagged traffic belongs to. */ if (pvid == VLAN_N_VID) return false; - /* PVID is set on this port. Any untagged ingress - * frame is considered to belong to this vlan. + /* PVID is set on this port. Any untagged or priority-tagged + * ingress frame is considered to belong to this vlan. */ - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), pvid); + if (likely(err)) + /* Untagged Frame. */ + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), pvid); + else + /* Priority-tagged Frame. + * At this point, We know that skb->vlan_tci had + * VLAN_TAG_PRESENT bit and its VID field was 0x000. + * We update only VID field and preserve PCP field. + */ + skb->vlan_tci |= pvid; + return true; } -- cgit v1.2.2 From d1c6c708c4da9d104e0b7c116654cb449bff9b5f Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Wed, 16 Oct 2013 17:07:15 +0900 Subject: bridge: Fix the way the PVID is referenced We are using the VLAN_TAG_PRESENT bit to detect whether the PVID is set or not at br_get_pvid(), while we don't care about the bit in adding/deleting the PVID, which makes it impossible to forward any incomming untagged frame with vlan_filtering enabled. Since vid 0 cannot be used for the PVID, we can use vid 0 to indicate that the PVID is not set, which is slightly more efficient than using the VLAN_TAG_PRESENT. Fix the problem by getting rid of using the VLAN_TAG_PRESENT. Signed-off-by: Toshiaki Makita Reviewed-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/bridge/br_private.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index efb57d911569..7ca2ae45b2d5 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -643,9 +643,7 @@ static inline u16 br_get_pvid(const struct net_port_vlans *v) * vid wasn't set */ smp_rmb(); - return (v->pvid & VLAN_TAG_PRESENT) ? - (v->pvid & ~VLAN_TAG_PRESENT) : - VLAN_N_VID; + return v->pvid ?: VLAN_N_VID; } #else -- cgit v1.2.2 From dfb5fa32c66496a53ec6a45302d902416b51ade2 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Wed, 16 Oct 2013 17:07:16 +0900 Subject: bridge: Fix updating FDB entries when the PVID is applied We currently set the value that variable vid is pointing, which will be used in FDB later, to 0 at br_allowed_ingress() when we receive untagged or priority-tagged frames, even though the PVID is valid. This leads to FDB updates in such a wrong way that they are learned with VID 0. Update the value to that of PVID if the PVID is applied. Signed-off-by: Toshiaki Makita Reviewed-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/bridge/br_vlan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 5a9c44a0c306..53f0990eab58 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -217,6 +217,7 @@ bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, /* PVID is set on this port. Any untagged or priority-tagged * ingress frame is considered to belong to this vlan. */ + *vid = pvid; if (likely(err)) /* Untagged Frame. */ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), pvid); -- cgit v1.2.2 From 2b13d06c9584b4eb773f1e80bbaedab9a1c344e1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Salva=20Peir=C3=B3?= Date: Wed, 16 Oct 2013 12:46:50 +0200 Subject: wanxl: fix info leak in ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The wanxl_ioctl() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró Signed-off-by: David S. Miller --- drivers/net/wan/wanxl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c index 6a24a5a70cc7..4c0a69779b89 100644 --- a/drivers/net/wan/wanxl.c +++ b/drivers/net/wan/wanxl.c @@ -355,6 +355,7 @@ static int wanxl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ifr->ifr_settings.size = size; /* data size wanted */ return -ENOBUFS; } + memset(&line, 0, sizeof(line)); line.clock_type = get_status(port)->clocking; line.clock_rate = 0; line.loopback = 0; -- cgit v1.2.2 From 0fb88d61bc60779dde88b0fc268da17eb81d0412 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Thu, 17 Oct 2013 11:47:14 +0530 Subject: be2net: pass if_id for v1 and V2 versions of TX_CREATE cmd It is a required field for all TX_CREATE cmd versions > 0. This fixes a driver initialization failure, caused by recent SH-R Firmwares (versions > 10.0.639.0) failing the TX_CREATE cmd when if_id field is not passed. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index bd0e0c0bbcd8..c08fd32bb8e5 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -1198,7 +1198,6 @@ int be_cmd_txq_create(struct be_adapter *adapter, struct be_tx_obj *txo) if (lancer_chip(adapter)) { req->hdr.version = 1; - req->if_id = cpu_to_le16(adapter->if_handle); } else if (BEx_chip(adapter)) { if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) req->hdr.version = 2; @@ -1206,6 +1205,8 @@ int be_cmd_txq_create(struct be_adapter *adapter, struct be_tx_obj *txo) req->hdr.version = 2; } + if (req->hdr.version > 0) + req->if_id = cpu_to_le16(adapter->if_handle); req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); req->ulp_num = BE_ULP1_NUM; req->type = BE_ETH_TX_RING_TYPE_STANDARD; -- cgit v1.2.2 From 66c562efbf35e98c42789f73cf39ad5f28abf6be Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Thu, 17 Oct 2013 18:26:38 -0400 Subject: qlcnic: Validate Tx queue only for 82xx adapters. o validate Tx queue only in case of adapters which supports multi Tx queue. This patch is to fix regression introduced in commit aa4a1f7df7cbb98797c9f4edfde3c726e2b3841f "qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter" Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 8 +------- 2 files changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index ebe4c86e5230..ff83a9fcd4c5 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -665,7 +665,7 @@ static int qlcnic_set_channels(struct net_device *dev, return err; } - if (channel->tx_count) { + if (qlcnic_82xx_check(adapter) && channel->tx_count) { err = qlcnic_validate_max_tx_rings(adapter, channel->tx_count); if (err) return err; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index f07f2b0fefa0..9e61eb867452 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3651,11 +3651,6 @@ int qlcnic_validate_max_tx_rings(struct qlcnic_adapter *adapter, u32 txq) u8 max_hw = QLCNIC_MAX_TX_RINGS; u32 max_allowed; - if (!qlcnic_82xx_check(adapter)) { - netdev_err(netdev, "No Multi TX-Q support\n"); - return -EINVAL; - } - if (!qlcnic_use_msi_x && !qlcnic_use_msi) { netdev_err(netdev, "No Multi TX-Q support in INT-x mode\n"); return -EINVAL; @@ -3695,8 +3690,7 @@ int qlcnic_validate_max_rss(struct qlcnic_adapter *adapter, u8 max_hw = adapter->ahw->max_rx_ques; u32 max_allowed; - if (qlcnic_82xx_check(adapter) && !qlcnic_use_msi_x && - !qlcnic_use_msi) { + if (!qlcnic_use_msi_x && !qlcnic_use_msi) { netdev_err(netdev, "No RSS support in INT-x mode\n"); return -EINVAL; } -- cgit v1.2.2 From 90c6bd34f884cd9cee21f1d152baf6c18bcac949 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 17 Oct 2013 22:51:31 +0200 Subject: net: unix: inherit SOCK_PASS{CRED, SEC} flags from socket to fix race In the case of credentials passing in unix stream sockets (dgram sockets seem not affected), we get a rather sparse race after commit 16e5726 ("af_unix: dont send SCM_CREDENTIALS by default"). We have a stream server on receiver side that requests credential passing from senders (e.g. nc -U). Since we need to set SO_PASSCRED on each spawned/accepted socket on server side to 1 first (as it's not inherited), it can happen that in the time between accept() and setsockopt() we get interrupted, the sender is being scheduled and continues with passing data to our receiver. At that time SO_PASSCRED is neither set on sender nor receiver side, hence in cmsg's SCM_CREDENTIALS we get eventually pid:0, uid:65534, gid:65534 (== overflow{u,g}id) instead of what we actually would like to see. On the sender side, here nc -U, the tests in maybe_add_creds() invoked through unix_stream_sendmsg() would fail, as at that exact time, as mentioned, the sender has neither SO_PASSCRED on his side nor sees it on the server side, and we have a valid 'other' socket in place. Thus, sender believes it would just look like a normal connection, not needing/requesting SO_PASSCRED at that time. As reverting 16e5726 would not be an option due to the significant performance regression reported when having creds always passed, one way/trade-off to prevent that would be to set SO_PASSCRED on the listener socket and allow inheriting these flags to the spawned socket on server side in accept(). It seems also logical to do so if we'd tell the listener socket to pass those flags onwards, and would fix the race. Before, strace: recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"blub\n", 4096}], msg_controllen=32, {cmsg_len=28, cmsg_level=SOL_SOCKET, cmsg_type=SCM_CREDENTIALS{pid=0, uid=65534, gid=65534}}, msg_flags=0}, 0) = 5 After, strace: recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"blub\n", 4096}], msg_controllen=32, {cmsg_len=28, cmsg_level=SOL_SOCKET, cmsg_type=SCM_CREDENTIALS{pid=11580, uid=1000, gid=1000}}, msg_flags=0}, 0) = 5 Signed-off-by: Daniel Borkmann Cc: Eric Dumazet Cc: Eric W. Biederman Signed-off-by: David S. Miller --- net/unix/af_unix.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 86de99ad2976..c1f403bed683 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1246,6 +1246,15 @@ static int unix_socketpair(struct socket *socka, struct socket *sockb) return 0; } +static void unix_sock_inherit_flags(const struct socket *old, + struct socket *new) +{ + if (test_bit(SOCK_PASSCRED, &old->flags)) + set_bit(SOCK_PASSCRED, &new->flags); + if (test_bit(SOCK_PASSSEC, &old->flags)) + set_bit(SOCK_PASSSEC, &new->flags); +} + static int unix_accept(struct socket *sock, struct socket *newsock, int flags) { struct sock *sk = sock->sk; @@ -1280,6 +1289,7 @@ static int unix_accept(struct socket *sock, struct socket *newsock, int flags) /* attach accepted sock to socket */ unix_state_lock(tsk); newsock->state = SS_CONNECTED; + unix_sock_inherit_flags(sock, newsock); sock_graft(tsk, newsock); unix_state_unlock(tsk); return 0; -- cgit v1.2.2 From f2e5ddcc0d12f9c4c7b254358ad245c9dddce13b Mon Sep 17 00:00:00 2001 From: Seif Mazareeb Date: Thu, 17 Oct 2013 20:33:21 -0700 Subject: net: fix cipso packet validation when !NETLABEL When CONFIG_NETLABEL is disabled, the cipso_v4_validate() function could loop forever in the main loop if opt[opt_iter +1] == 0, this will causing a kernel crash in an SMP system, since the CPU executing this function will stall /not respond to IPIs. This problem can be reproduced by running the IP Stack Integrity Checker (http://isic.sourceforge.net) using the following command on a Linux machine connected to DUT: "icmpsic -s rand -d -r 123456" wait (1-2 min) Signed-off-by: Seif Mazareeb Acked-by: Paul Moore Signed-off-by: David S. Miller --- include/net/cipso_ipv4.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/net/cipso_ipv4.h b/include/net/cipso_ipv4.h index a7a683e30b64..a8c2ef6d3b93 100644 --- a/include/net/cipso_ipv4.h +++ b/include/net/cipso_ipv4.h @@ -290,6 +290,7 @@ static inline int cipso_v4_validate(const struct sk_buff *skb, unsigned char err_offset = 0; u8 opt_len = opt[1]; u8 opt_iter; + u8 tag_len; if (opt_len < 8) { err_offset = 1; @@ -302,11 +303,12 @@ static inline int cipso_v4_validate(const struct sk_buff *skb, } for (opt_iter = 6; opt_iter < opt_len;) { - if (opt[opt_iter + 1] > (opt_len - opt_iter)) { + tag_len = opt[opt_iter + 1]; + if ((tag_len == 0) || (opt[opt_iter + 1] > (opt_len - opt_iter))) { err_offset = opt_iter + 1; goto out; } - opt_iter += opt[opt_iter + 1]; + opt_iter += tag_len; } out: -- cgit v1.2.2 From e36d3ff91130002c7c2d1d6a55556991da1daecc Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 19 Oct 2013 12:29:15 +0200 Subject: udp6: respect IPV6_DONTFRAG sockopt in case there are pending frames if up->pending != 0 dontfrag is left with default value -1. That causes that application that do: sendto len>mtu flag MSG_MORE sendto len>mtu flag 0 will receive EMSGSIZE errno as the result of the second sendto. This patch fixes it by respecting IPV6_DONTFRAG socket option. introduced by: commit 4b340ae20d0e2366792abe70f46629e576adaf5e "IPv6: Complete IPV6_DONTFRAG support" Signed-off-by: Jiri Pirko Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/udp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 72b7eaaf3ca0..18786098fd41 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1225,9 +1225,6 @@ do_udp_sendmsg: if (tclass < 0) tclass = np->tclass; - if (dontfrag < 0) - dontfrag = np->dontfrag; - if (msg->msg_flags&MSG_CONFIRM) goto do_confirm; back_from_confirm: @@ -1246,6 +1243,8 @@ back_from_confirm: up->pending = AF_INET6; do_append_data: + if (dontfrag < 0) + dontfrag = np->dontfrag; up->len += ulen; getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag; err = ip6_append_data(sk, getfrag, msg->msg_iov, ulen, -- cgit v1.2.2 From c547dbf55d5f8cf615ccc0e7265e98db27d3fb8b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 19 Oct 2013 12:29:16 +0200 Subject: ip6_output: do skb ufo init for peeked non ufo skb as well Now, if user application does: sendto lenmtu flag 0 The skb is not treated as fragmented one because it is not initialized that way. So move the initialization to fix this. introduced by: commit e89e9cf539a28df7d0eb1d0a545368e9920b34ac "[IPv4/IPv6]: UFO Scatter-gather approach" Signed-off-by: Jiri Pirko Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index a54c45ce4a48..975624b8d2ea 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1008,6 +1008,7 @@ static inline int ip6_ufo_append_data(struct sock *sk, { struct sk_buff *skb; + struct frag_hdr fhdr; int err; /* There is support for UDP large send offload by network @@ -1015,8 +1016,6 @@ static inline int ip6_ufo_append_data(struct sock *sk, * udp datagram */ if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) { - struct frag_hdr fhdr; - skb = sock_alloc_send_skb(sk, hh_len + fragheaderlen + transhdrlen + 20, (flags & MSG_DONTWAIT), &err); @@ -1036,20 +1035,24 @@ static inline int ip6_ufo_append_data(struct sock *sk, skb->transport_header = skb->network_header + fragheaderlen; skb->protocol = htons(ETH_P_IPV6); - skb->ip_summed = CHECKSUM_PARTIAL; skb->csum = 0; - /* Specify the length of each IPv6 datagram fragment. - * It has to be a multiple of 8. - */ - skb_shinfo(skb)->gso_size = (mtu - fragheaderlen - - sizeof(struct frag_hdr)) & ~7; - skb_shinfo(skb)->gso_type = SKB_GSO_UDP; - ipv6_select_ident(&fhdr, rt); - skb_shinfo(skb)->ip6_frag_id = fhdr.identification; __skb_queue_tail(&sk->sk_write_queue, skb); + } else if (skb_is_gso(skb)) { + goto append; } + skb->ip_summed = CHECKSUM_PARTIAL; + /* Specify the length of each IPv6 datagram fragment. + * It has to be a multiple of 8. + */ + skb_shinfo(skb)->gso_size = (mtu - fragheaderlen - + sizeof(struct frag_hdr)) & ~7; + skb_shinfo(skb)->gso_type = SKB_GSO_UDP; + ipv6_select_ident(&fhdr, rt); + skb_shinfo(skb)->ip6_frag_id = fhdr.identification; + +append: return skb_append_datato_frags(sk, skb, getfrag, from, (length - transhdrlen)); } -- cgit v1.2.2 From e93b7d748be887cd7639b113ba7d7ef792a7efb9 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 19 Oct 2013 12:29:17 +0200 Subject: ip_output: do skb ufo init for peeked non ufo skb as well Now, if user application does: sendto lenmtu flag 0 The skb is not treated as fragmented one because it is not initialized that way. So move the initialization to fix this. introduced by: commit e89e9cf539a28df7d0eb1d0a545368e9920b34ac "[IPv4/IPv6]: UFO Scatter-gather approach" Signed-off-by: Jiri Pirko Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index a04d872c54f9..3982eabf61e1 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -772,15 +772,20 @@ static inline int ip_ufo_append_data(struct sock *sk, /* initialize protocol header pointer */ skb->transport_header = skb->network_header + fragheaderlen; - skb->ip_summed = CHECKSUM_PARTIAL; skb->csum = 0; - /* specify the length of each IP datagram fragment */ - skb_shinfo(skb)->gso_size = maxfraglen - fragheaderlen; - skb_shinfo(skb)->gso_type = SKB_GSO_UDP; + __skb_queue_tail(queue, skb); + } else if (skb_is_gso(skb)) { + goto append; } + skb->ip_summed = CHECKSUM_PARTIAL; + /* specify the length of each IP datagram fragment */ + skb_shinfo(skb)->gso_size = maxfraglen - fragheaderlen; + skb_shinfo(skb)->gso_type = SKB_GSO_UDP; + +append: return skb_append_datato_frags(sk, skb, getfrag, from, (length - transhdrlen)); } -- cgit v1.2.2 From 49595b7b21ca60ebae7fb6d6fda7dc67d7bbbd66 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Sun, 20 Oct 2013 12:32:26 +0530 Subject: drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing When interrupt pacing is enabled, receive/transmit statistics are not updated properly by hardware which leads to ISR return with IRQ_NONE and inturn kernel disables the interrupt. This patch removed the checking of receive/transmit statistics from ISR. This patch is verified with AM335x Beagle Bone Black and below is the kernel warn when interrupt pacing is enabled. [ 104.298254] irq 58: nobody cared (try booting with the "irqpoll" option) [ 104.305356] CPU: 0 PID: 1073 Comm: iperf Not tainted 3.12.0-rc3-00342-g77d4015 #3 [ 104.313284] [] (unwind_backtrace+0x0/0xf0) from [] (show_stack+0x10/0x14) [ 104.322282] [] (show_stack+0x10/0x14) from [] (dump_stack+0x78/0x94) [ 104.330816] [] (dump_stack+0x78/0x94) from [] (__report_bad_irq+0x20/0xc0) [ 104.339889] [] (__report_bad_irq+0x20/0xc0) from [] (note_interrupt+0x1dc/0x23c) [ 104.349505] [] (note_interrupt+0x1dc/0x23c) from [] (handle_irq_event_percpu+0xc4/0x238) [ 104.359851] [] (handle_irq_event_percpu+0xc4/0x238) from [] (handle_irq_event+0x3c/0x5c) [ 104.370198] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0xac/0x10c) [ 104.379907] [] (handle_level_irq+0xac/0x10c) from [] (generic_handle_irq+0x20/0x30) [ 104.389812] [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x4c/0xb0) [ 104.399066] [] (handle_IRQ+0x4c/0xb0) from [] (omap3_intc_handle_irq+0x60/0x74) [ 104.408598] [] (omap3_intc_handle_irq+0x60/0x74) from [] (__irq_svc+0x44/0x5c) [ 104.418021] Exception stack(0xde4f7c00 to 0xde4f7c48) [ 104.423345] 7c00: 00000001 00000000 00000000 dd002140 60000013 de006e54 00000002 00000000 [ 104.431952] 7c20: de345748 00000040 c11c8588 00018ee0 00000000 de4f7c48 c009dfc8 c050d300 [ 104.440553] 7c40: 60000013 ffffffff [ 104.444237] [] (__irq_svc+0x44/0x5c) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 104.454220] [] (_raw_spin_unlock_irqrestore+0x34/0x44) from [] (__irq_put_desc_unlock+0x14/0x38) [ 104.465295] [] (__irq_put_desc_unlock+0x14/0x38) from [] (enable_irq+0x4c/0x74) [ 104.474829] [] (enable_irq+0x4c/0x74) from [] (cpsw_poll+0xb8/0xdc) [ 104.483276] [] (cpsw_poll+0xb8/0xdc) from [] (net_rx_action+0xc0/0x1e8) [ 104.492085] [] (net_rx_action+0xc0/0x1e8) from [] (__do_softirq+0x100/0x27c) [ 104.501338] [] (__do_softirq+0x100/0x27c) from [] (do_softirq+0x68/0x70) [ 104.510224] [] (do_softirq+0x68/0x70) from [] (local_bh_enable+0xd0/0xe4) [ 104.519211] [] (local_bh_enable+0xd0/0xe4) from [] (tcp_rcv_established+0x450/0x648) [ 104.529201] [] (tcp_rcv_established+0x450/0x648) from [] (tcp_v4_do_rcv+0x154/0x474) [ 104.539195] [] (tcp_v4_do_rcv+0x154/0x474) from [] (release_sock+0xac/0x1ac) [ 104.548448] [] (release_sock+0xac/0x1ac) from [] (tcp_recvmsg+0x4d0/0xa8c) [ 104.557528] [] (tcp_recvmsg+0x4d0/0xa8c) from [] (inet_recvmsg+0xcc/0xf0) [ 104.566507] [] (inet_recvmsg+0xcc/0xf0) from [] (sock_recvmsg+0x90/0xb0) [ 104.575394] [] (sock_recvmsg+0x90/0xb0) from [] (SyS_recvfrom+0x88/0xd8) [ 104.584280] [] (SyS_recvfrom+0x88/0xd8) from [] (sys_recv+0x18/0x20) [ 104.592805] [] (sys_recv+0x18/0x20) from [] (ret_fast_syscall+0x0/0x48) [ 104.601587] handlers: [ 104.603992] [] cpsw_interrupt [ 104.608040] Disabling IRQ #58 Cc: Sebastian Siewior Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index fccd9d4d4ae0..cc3ce557e4aa 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -639,13 +639,6 @@ void cpsw_rx_handler(void *token, int len, int status) static irqreturn_t cpsw_interrupt(int irq, void *dev_id) { struct cpsw_priv *priv = dev_id; - u32 rx, tx, rx_thresh; - - rx_thresh = __raw_readl(&priv->wr_regs->rx_thresh_stat); - rx = __raw_readl(&priv->wr_regs->rx_stat); - tx = __raw_readl(&priv->wr_regs->tx_stat); - if (!rx_thresh && !rx && !tx) - return IRQ_NONE; cpsw_intr_disable(priv); if (priv->irq_enabled == true) { -- cgit v1.2.2 From b1239723f0564778d993d51d18afdfda01bdaca3 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 20 Oct 2013 16:51:26 +0200 Subject: bnx2x: Fix Maximum CoS estimation for VFs bnx2x VFs do not support Multi-CoS; Current implementation erroneously sets the VFs maximal number of CoS to be > 1. This will cause the driver to call alloc_etherdev_mqs() with a number of queues it cannot possibly support and reflects in 'odd' driver prints. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 82b658d8c04c..60f9e68ea46c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12612,24 +12612,24 @@ static int set_max_cos_est(int chip_id) return BNX2X_MULTI_TX_COS_E1X; case BCM57712: case BCM57712_MF: - case BCM57712_VF: return BNX2X_MULTI_TX_COS_E2_E3A0; case BCM57800: case BCM57800_MF: - case BCM57800_VF: case BCM57810: case BCM57810_MF: case BCM57840_4_10: case BCM57840_2_20: case BCM57840_O: case BCM57840_MFO: - case BCM57810_VF: case BCM57840_MF: - case BCM57840_VF: case BCM57811: case BCM57811_MF: - case BCM57811_VF: return BNX2X_MULTI_TX_COS_E3B0; + case BCM57712_VF: + case BCM57800_VF: + case BCM57810_VF: + case BCM57840_VF: + case BCM57811_VF: return 1; default: pr_err("Unknown board_type (%d), aborting\n", chip_id); -- cgit v1.2.2 From 1a6974b2c78755ae55d7be738866eb8d57c3ed45 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 20 Oct 2013 16:51:27 +0200 Subject: bnx2x: Prevent an illegal pointer dereference during panic During a panic, the driver tries to print the Management FW buffer of recent commands. To do so, the driver reads the address of that buffer from a known address. If the buffer is unavailable (e.g., PCI reads don't work, MCP is failing, etc.), the driver will try to access the address it has read, possibly causing a kernel panic. This check 'sanitizes' the access, validating the read value is indeed a valid address inside the management FW's buffers. The patch also removes a read outside the scope of the buffer, which resulted in some unrelated chraracters appearing in the log. Signed-off-by: Yuval Mintz Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 4 +++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 32 ++++++++++++++++++------ 2 files changed, 29 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 97b3d32a98bd..d21742ca2fd2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2498,4 +2498,8 @@ enum bnx2x_pci_bus_speed { }; void bnx2x_set_local_cmng(struct bnx2x *bp); + +#define MCPR_SCRATCH_BASE(bp) \ + (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH) + #endif /* bnx2x.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 60f9e68ea46c..c2609c41340e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -751,6 +751,10 @@ static int bnx2x_mc_assert(struct bnx2x *bp) return rc; } +#define MCPR_TRACE_BUFFER_SIZE (0x800) +#define SCRATCH_BUFFER_SIZE(bp) \ + (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000)) + void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) { u32 addr, val; @@ -775,7 +779,17 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) trace_shmem_base = bp->common.shmem_base; else trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr); - addr = trace_shmem_base - 0x800; + + /* sanity */ + if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE || + trace_shmem_base >= MCPR_SCRATCH_BASE(bp) + + SCRATCH_BUFFER_SIZE(bp)) { + BNX2X_ERR("Unable to dump trace buffer (mark %x)\n", + trace_shmem_base); + return; + } + + addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE; /* validate TRCB signature */ mark = REG_RD(bp, addr); @@ -787,14 +801,17 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) /* read cyclic buffer pointer */ addr += 4; mark = REG_RD(bp, addr); - mark = (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH) - + ((mark + 0x3) & ~0x3) - 0x08000000; + mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000; + if (mark >= trace_shmem_base || mark < addr + 4) { + BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n"); + return; + } printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); printk("%s", lvl); /* dump buffer after the mark */ - for (offset = mark; offset <= trace_shmem_base; offset += 0x8*4) { + for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, offset + 4*word)); data[8] = 0x0; @@ -11685,9 +11702,6 @@ static int bnx2x_init_bp(struct bnx2x *bp) static int bnx2x_open(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); - bool global = false; - int other_engine = BP_PATH(bp) ? 0 : 1; - bool other_load_status, load_status; int rc; bp->stats_init = true; @@ -11703,6 +11717,10 @@ static int bnx2x_open(struct net_device *dev) * Parity recovery is only relevant for PF driver. */ if (IS_PF(bp)) { + int other_engine = BP_PATH(bp) ? 0 : 1; + bool other_load_status, load_status; + bool global = false; + other_load_status = bnx2x_get_load_status(bp, other_engine); load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || -- cgit v1.2.2 From 31329afdacd107f129dd4ed4464233a7e514ca7d Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Sun, 20 Oct 2013 16:51:28 +0200 Subject: bnx2x: Unlock VF-PF channel on MAC/VLAN config error Current code returns upon failure, leaving the VF-PF in an unusable state; This patch adds the missing release so further commands could pass between PF and VF. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 9ad012bdd915..997c6611a2ae 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -3390,14 +3390,16 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac) rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true); if (rc) { BNX2X_ERR("failed to delete eth macs\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* remove existing uc list macs */ rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, true); if (rc) { BNX2X_ERR("failed to delete uc_list macs\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* configure the new mac to device */ @@ -3405,6 +3407,7 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac) bnx2x_set_mac_one(bp, (u8 *)&bulletin->mac, mac_obj, true, BNX2X_ETH_MAC, &ramrod_flags); +out: bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); } @@ -3467,7 +3470,8 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) &ramrod_flags); if (rc) { BNX2X_ERR("failed to delete vlans\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* send queue update ramrod to configure default vlan and silent @@ -3501,7 +3505,8 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) rc = bnx2x_config_vlan_mac(bp, &ramrod_param); if (rc) { BNX2X_ERR("failed to configure vlan\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* configure default vlan to vf queue and set silent @@ -3519,18 +3524,18 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) rc = bnx2x_queue_state_change(bp, &q_params); if (rc) { BNX2X_ERR("Failed to configure default VLAN\n"); - return rc; + goto out; } /* clear the flag indicating that this VF needs its vlan - * (will only be set if the HV configured th Vlan before vf was - * and we were called because the VF came up later + * (will only be set if the HV configured the Vlan before vf was + * up and we were called because the VF came up later */ +out: vf->cfg_flags &= ~VF_CFG_VLAN; - bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN); } - return 0; + return rc; } /* crc is the first field in the bulletin board. Compute the crc over the -- cgit v1.2.2 From 6802516edd1bfa6dfaea7949046d173e656ee6d3 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 20 Oct 2013 16:51:29 +0200 Subject: bnx2x: Fix Coalescing configuration bnx2x drivers configure coalescing incorrectly (e.g., as a result of a call to 'ethtool -c'). Although this is almost invisible to the user (due to NAPI) designated tests will show the configuration is incorrect. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index d21742ca2fd2..986edbf89ea0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1621,7 +1621,7 @@ struct bnx2x { u16 rx_ticks_int; u16 rx_ticks; /* Maximal coalescing timeout in us */ -#define BNX2X_MAX_COALESCE_TOUT (0xf0*12) +#define BNX2X_MAX_COALESCE_TOUT (0xff*BNX2X_BTR) u32 lin_cnt; -- cgit v1.2.2 From 0907f34c372766e2822ffd0ec290c69199835faa Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Sun, 20 Oct 2013 16:51:30 +0200 Subject: bnx2x: Fix config when SR-IOV and iSCSI are enabled Starting with commit b9871bc "bnx2x: VF RSS support - PF side", if a PF will have SR-IOV supported in its PCI configuration space, storage drivers will not work for that interface. This patch fixes the resource calculation to allow such a configuration to properly work. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 986edbf89ea0..275b1261e533 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1197,8 +1197,9 @@ union cdu_context { /* TM (timers) host DB constants */ #define TM_ILT_PAGE_SZ_HW 0 #define TM_ILT_PAGE_SZ (4096 << TM_ILT_PAGE_SZ_HW) /* 4K */ -/* #define TM_CONN_NUM (CNIC_STARTING_CID+CNIC_ISCSI_CXT_MAX) */ -#define TM_CONN_NUM 1024 +#define TM_CONN_NUM (BNX2X_FIRST_VF_CID + \ + BNX2X_VF_CIDS + \ + CNIC_ISCSI_CID_MAX) #define TM_ILT_SZ (8 * TM_CONN_NUM) #define TM_ILT_LINES DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ) -- cgit v1.2.2 From 6b991c3763e15a0884095fc0c133980c5577e9c7 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 20 Oct 2013 16:51:31 +0200 Subject: bnx2x: Prevent null pointer dereference on error flow If debug message is open and bnx2x_vfop_qdtor_cmd() were to fail, the resulting print would have caused a null pointer dereference. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 997c6611a2ae..bf08ad68b405 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -470,10 +470,10 @@ static int bnx2x_vfop_qdtor_cmd(struct bnx2x *bp, bnx2x_vfop_qdtor, cmd->done); return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdtor, cmd->block); + } else { + BNX2X_ERR("VF[%d] failed to add a vfop\n", vf->abs_vfid); + return -ENOMEM; } - DP(BNX2X_MSG_IOV, "VF[%d] failed to add a vfop. rc %d\n", - vf->abs_vfid, vfop->rc); - return -ENOMEM; } static void -- cgit v1.2.2 From 32316a46f2bbd4a898acf86547197cff8476f442 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Sun, 20 Oct 2013 16:51:32 +0200 Subject: bnx2x: Lock DMAE when used by statistic flow bnx2x has several clients to its DMAE machines - all of them with the exception of the statistics flow used the same locking mechanisms to synchronize the DMAE machines' usage. Since statistics (which are periodically entered) use DMAE without taking the locks, they may erase the commands which were previously set - e.g., it may cause a VF to timeout while waiting for a PF answer on the VF-PF channel as that command header would have been overwritten by the statistics' header. This patch makes certain that all flows utilizing DMAE will use the same API, assuring that the locking scheme will be kept by all said flows. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 3 ++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++++------- drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 2 +- 4 files changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 275b1261e533..310c57aa9221 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2073,7 +2073,8 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, u8 src_type, u8 dst_type); -int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae); +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u32 *comp); /* FLR related routines */ u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c2609c41340e..236707228f67 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -503,9 +503,9 @@ void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, } /* issue a dmae command over the init-channel and wait for completion */ -int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae) +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u32 *comp) { - u32 *wb_comp = bnx2x_sp(bp, wb_comp); int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000; int rc = 0; @@ -518,14 +518,14 @@ int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae) spin_lock_bh(&bp->dmae_lock); /* reset completion */ - *wb_comp = 0; + *comp = 0; /* post the command on the channel used for initializations */ bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); /* wait for completion */ udelay(5); - while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { + while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { if (!cnt || (bp->recovery_state != BNX2X_RECOVERY_DONE && @@ -537,7 +537,7 @@ int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae) cnt--; udelay(50); } - if (*wb_comp & DMAE_PCI_ERR_FLAG) { + if (*comp & DMAE_PCI_ERR_FLAG) { BNX2X_ERR("DMAE PCI error!\n"); rc = DMAE_PCI_ERROR; } @@ -574,7 +574,7 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, dmae.len = len32; /* issue the command and wait for completion */ - rc = bnx2x_issue_dmae_with_comp(bp, &dmae); + rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); if (rc) { BNX2X_ERR("DMAE returned failure %d\n", rc); bnx2x_panic(); @@ -611,7 +611,7 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) dmae.len = len32; /* issue the command and wait for completion */ - rc = bnx2x_issue_dmae_with_comp(bp, &dmae); + rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); if (rc) { BNX2X_ERR("DMAE returned failure %d\n", rc); bnx2x_panic(); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 86436c77af03..3b75070411aa 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -196,7 +196,7 @@ static void bnx2x_hw_stats_post(struct bnx2x *bp) } else if (bp->func_stx) { *stats_comp = 0; - bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); + bnx2x_issue_dmae_with_comp(bp, dmae, stats_comp); } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index da16953eb2ec..28757dfacf0d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -980,7 +980,7 @@ static int bnx2x_copy32_vf_dmae(struct bnx2x *bp, u8 from_vf, dmae.len = len32; /* issue the command and wait for completion */ - return bnx2x_issue_dmae_with_comp(bp, &dmae); + return bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); } static void bnx2x_vf_mbx_resp(struct bnx2x *bp, struct bnx2x_virtf *vf) -- cgit v1.2.2 From 4293b9f57a46469d6762be3300e2c3fa6515905d Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 20 Oct 2013 16:51:33 +0200 Subject: bnx2x: Don't pretend during register dump As part of a register dump, the interface pretends to have the identity of other interfaces of the same physical device in order to perform HW configuration for them - specifically, it needs to prevent attentions from generating on those functions as the register dump accesses registers in common blocks which whose reading might generate an attention. However, such pretension is unsafe - unlike other flows in which the driver uses pretend, during register dump there is no guarantee no other HW access will take place (by other flows). If such access will take place, the HW will be accessed by the wrong interface, and leave both functions in an incorrect state. This patch removes all pretensions from the register dump flow. Instead, it changes initial configuration of attentions such that no fatal attention will be generated for other functions as a result of the register dump (notice however, a debug print claiming an attention from other functions IS possible during the register dump) Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 40 +-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h | 38 ++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 328 +++++++++++---------- 3 files changed, 201 insertions(+), 205 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 324de5f05332..e8efa1c93ffe 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -891,17 +891,8 @@ static void bnx2x_get_regs(struct net_device *dev, * will re-enable parity attentions right after the dump. */ - /* Disable parity on path 0 */ - bnx2x_pretend_func(bp, 0); bnx2x_disable_blocks_parity(bp); - /* Disable parity on path 1 */ - bnx2x_pretend_func(bp, 1); - bnx2x_disable_blocks_parity(bp); - - /* Return to current function */ - bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); - dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1; dump_hdr.preset = DUMP_ALL_PRESETS; dump_hdr.version = BNX2X_DUMP_VERSION; @@ -928,18 +919,9 @@ static void bnx2x_get_regs(struct net_device *dev, /* Actually read the registers */ __bnx2x_get_regs(bp, p); - /* Re-enable parity attentions on path 0 */ - bnx2x_pretend_func(bp, 0); + /* Re-enable parity attentions */ bnx2x_clear_blocks_parity(bp); bnx2x_enable_blocks_parity(bp); - - /* Re-enable parity attentions on path 1 */ - bnx2x_pretend_func(bp, 1); - bnx2x_clear_blocks_parity(bp); - bnx2x_enable_blocks_parity(bp); - - /* Return to current function */ - bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); } static int bnx2x_get_preset_regs_len(struct net_device *dev, u32 preset) @@ -993,17 +975,8 @@ static int bnx2x_get_dump_data(struct net_device *dev, * will re-enable parity attentions right after the dump. */ - /* Disable parity on path 0 */ - bnx2x_pretend_func(bp, 0); bnx2x_disable_blocks_parity(bp); - /* Disable parity on path 1 */ - bnx2x_pretend_func(bp, 1); - bnx2x_disable_blocks_parity(bp); - - /* Return to current function */ - bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); - dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1; dump_hdr.preset = bp->dump_preset_idx; dump_hdr.version = BNX2X_DUMP_VERSION; @@ -1032,19 +1005,10 @@ static int bnx2x_get_dump_data(struct net_device *dev, /* Actually read the registers */ __bnx2x_get_preset_regs(bp, p, dump_hdr.preset); - /* Re-enable parity attentions on path 0 */ - bnx2x_pretend_func(bp, 0); + /* Re-enable parity attentions */ bnx2x_clear_blocks_parity(bp); bnx2x_enable_blocks_parity(bp); - /* Re-enable parity attentions on path 1 */ - bnx2x_pretend_func(bp, 1); - bnx2x_clear_blocks_parity(bp); - bnx2x_enable_blocks_parity(bp); - - /* Return to current function */ - bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); - return 0; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h index 76df015f486a..c2dfea7968f4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h @@ -640,23 +640,35 @@ static const struct { * [30] MCP Latched ump_tx_parity * [31] MCP Latched scpad_parity */ -#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ +#define MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS \ (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \ - AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY) + +#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ + (MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS | \ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY) /* Below registers control the MCP parity attention output. When * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are * enabled, when cleared - disabled. */ -static const u32 mcp_attn_ctl_regs[] = { - MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, - MISC_REG_AEU_ENABLE4_NIG_0, - MISC_REG_AEU_ENABLE4_PXP_0, - MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, - MISC_REG_AEU_ENABLE4_NIG_1, - MISC_REG_AEU_ENABLE4_PXP_1 +static const struct { + u32 addr; + u32 bits; +} mcp_attn_ctl_regs[] = { + { MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, + MISC_AEU_ENABLE_MCP_PRTY_BITS }, + { MISC_REG_AEU_ENABLE4_NIG_0, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_PXP_0, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, + MISC_AEU_ENABLE_MCP_PRTY_BITS }, + { MISC_REG_AEU_ENABLE4_NIG_1, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_PXP_1, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS } }; static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable) @@ -665,14 +677,14 @@ static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable) u32 reg_val; for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) { - reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]); + reg_val = REG_RD(bp, mcp_attn_ctl_regs[i].addr); if (enable) - reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS; + reg_val |= mcp_attn_ctl_regs[i].bits; else - reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS; + reg_val &= ~mcp_attn_ctl_regs[i].bits; - REG_WR(bp, mcp_attn_ctl_regs[i], reg_val); + REG_WR(bp, mcp_attn_ctl_regs[i].addr, reg_val); } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 236707228f67..7a66bd2b8259 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4297,65 +4297,60 @@ static void _print_next_block(int idx, const char *blk) pr_cont("%s%s", idx ? ", " : "", blk); } -static int bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, - int par_num, bool print) +static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, + int *par_num, bool print) { - int i = 0; - u32 cur_bit = 0; + u32 cur_bit; + bool res; + int i; + + res = false; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { - switch (cur_bit) { - case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "BRB"); + res |= true; /* Each bit is real error! */ + + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: + _print_next_block((*par_num)++, "BRB"); _print_parity(bp, BRB1_REG_BRB1_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "PARSER"); + break; + case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: + _print_next_block((*par_num)++, + "PARSER"); _print_parity(bp, PRS_REG_PRS_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "TSDM"); + break; + case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: + _print_next_block((*par_num)++, "TSDM"); _print_parity(bp, TSDM_REG_TSDM_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, + break; + case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: + _print_next_block((*par_num)++, "SEARCHER"); _print_parity(bp, SRC_REG_SRC_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "TCM"); - _print_parity(bp, - TCM_REG_TCM_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "TSEMI"); + break; + case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: + _print_next_block((*par_num)++, "TCM"); + _print_parity(bp, TCM_REG_TCM_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: + _print_next_block((*par_num)++, + "TSEMI"); _print_parity(bp, TSEM_REG_TSEM_PRTY_STS_0); _print_parity(bp, TSEM_REG_TSEM_PRTY_STS_1); - } - break; - case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "XPB"); + break; + case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: + _print_next_block((*par_num)++, "XPB"); _print_parity(bp, GRCBASE_XPB + PB_REG_PB_PRTY_STS); + break; } - break; } /* Clear the bit */ @@ -4363,53 +4358,59 @@ static int bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, } } - return par_num; + return res; } -static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, - int par_num, bool *global, +static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, + int *par_num, bool *global, bool print) { - int i = 0; - u32 cur_bit = 0; + u32 cur_bit; + bool res; + int i; + + res = false; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { + res |= true; /* Each bit is real error! */ switch (cur_bit) { case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "PBF"); + _print_next_block((*par_num)++, "PBF"); _print_parity(bp, PBF_REG_PBF_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "QM"); + _print_next_block((*par_num)++, "QM"); _print_parity(bp, QM_REG_QM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "TM"); + _print_next_block((*par_num)++, "TM"); _print_parity(bp, TM_REG_TM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "XSDM"); + _print_next_block((*par_num)++, "XSDM"); _print_parity(bp, XSDM_REG_XSDM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "XCM"); + _print_next_block((*par_num)++, "XCM"); _print_parity(bp, XCM_REG_XCM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "XSEMI"); + _print_next_block((*par_num)++, + "XSEMI"); _print_parity(bp, XSEM_REG_XSEM_PRTY_STS_0); _print_parity(bp, @@ -4418,7 +4419,7 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, break; case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR: if (print) { - _print_next_block(par_num++, + _print_next_block((*par_num)++, "DOORBELLQ"); _print_parity(bp, DORQ_REG_DORQ_PRTY_STS); @@ -4426,7 +4427,7 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, break; case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "NIG"); + _print_next_block((*par_num)++, "NIG"); if (CHIP_IS_E1x(bp)) { _print_parity(bp, NIG_REG_NIG_PRTY_STS); @@ -4440,32 +4441,34 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, break; case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR: if (print) - _print_next_block(par_num++, + _print_next_block((*par_num)++, "VAUX PCI CORE"); *global = true; break; case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "DEBUG"); + _print_next_block((*par_num)++, + "DEBUG"); _print_parity(bp, DBG_REG_DBG_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "USDM"); + _print_next_block((*par_num)++, "USDM"); _print_parity(bp, USDM_REG_USDM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "UCM"); + _print_next_block((*par_num)++, "UCM"); _print_parity(bp, UCM_REG_UCM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "USEMI"); + _print_next_block((*par_num)++, + "USEMI"); _print_parity(bp, USEM_REG_USEM_PRTY_STS_0); _print_parity(bp, @@ -4474,21 +4477,21 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, break; case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "UPB"); + _print_next_block((*par_num)++, "UPB"); _print_parity(bp, GRCBASE_UPB + PB_REG_PB_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "CSDM"); + _print_next_block((*par_num)++, "CSDM"); _print_parity(bp, CSDM_REG_CSDM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "CCM"); + _print_next_block((*par_num)++, "CCM"); _print_parity(bp, CCM_REG_CCM_PRTY_STS); } break; @@ -4499,80 +4502,73 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, } } - return par_num; + return res; } -static int bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, - int par_num, bool print) +static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, + int *par_num, bool print) { - int i = 0; - u32 cur_bit = 0; + u32 cur_bit; + bool res; + int i; + + res = false; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { - switch (cur_bit) { - case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "CSEMI"); + res |= true; /* Each bit is real error! */ + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: + _print_next_block((*par_num)++, + "CSEMI"); _print_parity(bp, CSEM_REG_CSEM_PRTY_STS_0); _print_parity(bp, CSEM_REG_CSEM_PRTY_STS_1); - } - break; - case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "PXP"); + break; + case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: + _print_next_block((*par_num)++, "PXP"); _print_parity(bp, PXP_REG_PXP_PRTY_STS); _print_parity(bp, PXP2_REG_PXP2_PRTY_STS_0); _print_parity(bp, PXP2_REG_PXP2_PRTY_STS_1); - } - break; - case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: - if (print) - _print_next_block(par_num++, - "PXPPCICLOCKCLIENT"); - break; - case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "CFC"); + break; + case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: + _print_next_block((*par_num)++, + "PXPPCICLOCKCLIENT"); + break; + case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: + _print_next_block((*par_num)++, "CFC"); _print_parity(bp, CFC_REG_CFC_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "CDU"); + break; + case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: + _print_next_block((*par_num)++, "CDU"); _print_parity(bp, CDU_REG_CDU_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "DMAE"); + break; + case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: + _print_next_block((*par_num)++, "DMAE"); _print_parity(bp, DMAE_REG_DMAE_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "IGU"); + break; + case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: + _print_next_block((*par_num)++, "IGU"); if (CHIP_IS_E1x(bp)) _print_parity(bp, HC_REG_HC_PRTY_STS); else _print_parity(bp, IGU_REG_IGU_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "MISC"); + break; + case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: + _print_next_block((*par_num)++, "MISC"); _print_parity(bp, MISC_REG_MISC_PRTY_STS); + break; } - break; } /* Clear the bit */ @@ -4580,40 +4576,49 @@ static int bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, } } - return par_num; + return res; } -static int bnx2x_check_blocks_with_parity3(u32 sig, int par_num, - bool *global, bool print) +static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig, + int *par_num, bool *global, + bool print) { - int i = 0; - u32 cur_bit = 0; + bool res = false; + u32 cur_bit; + int i; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { switch (cur_bit) { case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY: if (print) - _print_next_block(par_num++, "MCP ROM"); + _print_next_block((*par_num)++, + "MCP ROM"); *global = true; + res |= true; break; case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY: if (print) - _print_next_block(par_num++, + _print_next_block((*par_num)++, "MCP UMP RX"); *global = true; + res |= true; break; case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY: if (print) - _print_next_block(par_num++, + _print_next_block((*par_num)++, "MCP UMP TX"); *global = true; + res |= true; break; case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY: if (print) - _print_next_block(par_num++, + _print_next_block((*par_num)++, "MCP SCPAD"); - *global = true; + /* clear latched SCPAD PATIRY from MCP */ + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, + 1UL << 10); break; } @@ -4622,45 +4627,50 @@ static int bnx2x_check_blocks_with_parity3(u32 sig, int par_num, } } - return par_num; + return res; } -static int bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig, - int par_num, bool print) +static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig, + int *par_num, bool print) { - int i = 0; - u32 cur_bit = 0; + u32 cur_bit; + bool res; + int i; + + res = false; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { - switch (cur_bit) { - case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "PGLUE_B"); + res |= true; /* Each bit is real error! */ + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: + _print_next_block((*par_num)++, + "PGLUE_B"); _print_parity(bp, - PGLUE_B_REG_PGLUE_B_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "ATC"); + PGLUE_B_REG_PGLUE_B_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: + _print_next_block((*par_num)++, "ATC"); _print_parity(bp, ATC_REG_ATC_PRTY_STS); + break; } - break; } - /* Clear the bit */ sig &= ~cur_bit; } } - return par_num; + return res; } static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, u32 *sig) { + bool res = false; + if ((sig[0] & HW_PRTY_ASSERT_SET_0) || (sig[1] & HW_PRTY_ASSERT_SET_1) || (sig[2] & HW_PRTY_ASSERT_SET_2) || @@ -4677,23 +4687,22 @@ static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, if (print) netdev_err(bp->dev, "Parity errors detected in blocks: "); - par_num = bnx2x_check_blocks_with_parity0(bp, - sig[0] & HW_PRTY_ASSERT_SET_0, par_num, print); - par_num = bnx2x_check_blocks_with_parity1(bp, - sig[1] & HW_PRTY_ASSERT_SET_1, par_num, global, print); - par_num = bnx2x_check_blocks_with_parity2(bp, - sig[2] & HW_PRTY_ASSERT_SET_2, par_num, print); - par_num = bnx2x_check_blocks_with_parity3( - sig[3] & HW_PRTY_ASSERT_SET_3, par_num, global, print); - par_num = bnx2x_check_blocks_with_parity4(bp, - sig[4] & HW_PRTY_ASSERT_SET_4, par_num, print); + res |= bnx2x_check_blocks_with_parity0(bp, + sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print); + res |= bnx2x_check_blocks_with_parity1(bp, + sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print); + res |= bnx2x_check_blocks_with_parity2(bp, + sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print); + res |= bnx2x_check_blocks_with_parity3(bp, + sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print); + res |= bnx2x_check_blocks_with_parity4(bp, + sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print); if (print) pr_cont("\n"); + } - return true; - } else - return false; + return res; } /** @@ -7143,7 +7152,7 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) int port = BP_PORT(bp); int init_phase = port ? PHASE_PORT1 : PHASE_PORT0; u32 low, high; - u32 val; + u32 val, reg; DP(NETIF_MSG_HW, "starting port init port %d\n", port); @@ -7288,6 +7297,17 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) val |= CHIP_IS_E1(bp) ? 0 : 0x10; REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val); + /* SCPAD_PARITY should NOT trigger close the gates */ + reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0; + REG_WR(bp, reg, + REG_RD(bp, reg) & + ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); + + reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0; + REG_WR(bp, reg, + REG_RD(bp, reg) & + ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); + bnx2x_init_block(bp, BLOCK_NIG, init_phase); if (!CHIP_IS_E1x(bp)) { -- cgit v1.2.2 From edd31476011052d8f6591a3194ba0716b0cea681 Mon Sep 17 00:00:00 2001 From: Merav Sicron Date: Sun, 20 Oct 2013 16:51:34 +0200 Subject: bnx2x: Set NETIF_F_HIGHDMA unconditionally Current driver implementation incorrectly sets the flag only if 64-bit DMA mask succeeded. Signed-off-by: Merav Sicron Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +--- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 310c57aa9221..c5e375ddd6c0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1528,7 +1528,6 @@ struct bnx2x { #define PCI_32BIT_FLAG (1 << 1) #define ONE_PORT_FLAG (1 << 2) #define NO_WOL_FLAG (1 << 3) -#define USING_DAC_FLAG (1 << 4) #define USING_MSIX_FLAG (1 << 5) #define USING_MSI_FLAG (1 << 6) #define DISABLE_MSI_FLAG (1 << 7) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 7a66bd2b8259..b42f89ce02ef 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12118,7 +12118,6 @@ static int bnx2x_set_coherency_mask(struct bnx2x *bp) struct device *dev = &bp->pdev->dev; if (dma_set_mask(dev, DMA_BIT_MASK(64)) == 0) { - bp->flags |= USING_DAC_FLAG; if (dma_set_coherent_mask(dev, DMA_BIT_MASK(64)) != 0) { dev_err(dev, "dma_set_coherent_mask failed, aborting\n"); return -EIO; @@ -12286,8 +12285,7 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA; dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX; - if (bp->flags & USING_DAC_FLAG) - dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_HIGHDMA; /* Add Loopback capability to the device */ dev->hw_features |= NETIF_F_LOOPBACK; -- cgit v1.2.2 From 96dc809514fb2328605198a0602b67554d8cce7b Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Sun, 20 Oct 2013 15:43:03 +0300 Subject: ipv6: always prefer rt6i_gateway if present In v3.9 6fd6ce2056de2709 ("ipv6: Do not depend on rt->n in ip6_finish_output2()." changed the behaviour of ip6_finish_output2() such that the recently introduced rt6_nexthop() is used instead of an assigned neighbor. As rt6_nexthop() prefers rt6i_gateway only for gatewayed routes this causes a problem for users like IPVS, xt_TEE and RAW(hdrincl) if they want to use different address for routing compared to the destination address. Another case is when redirect can create RTF_DYNAMIC route without RTF_GATEWAY flag, we ignore the rt6i_gateway in rt6_nexthop(). Fix the above problems by considering the rt6i_gateway if present, so that traffic routed to address on local subnet is not wrongly diverted to the destination address. Thanks to Simon Horman and Phil Oester for spotting the problematic commit. Thanks to Hannes Frederic Sowa for his review and help in testing. Reported-by: Phil Oester Reported-by: Mark Brooks Signed-off-by: Julian Anastasov Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/net/ip6_route.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index f525e7038cca..481404abdf65 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -196,7 +196,7 @@ static inline int ip6_skb_dst_mtu(struct sk_buff *skb) static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt, struct in6_addr *dest) { - if (rt->rt6i_flags & RTF_GATEWAY) + if (rt->rt6i_flags & RTF_GATEWAY || !ipv6_addr_any(&rt->rt6i_gateway)) return &rt->rt6i_gateway; return dest; } -- cgit v1.2.2 From 550bab42f83308c9d6ab04a980cc4333cef1c8fa Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Sun, 20 Oct 2013 15:43:04 +0300 Subject: ipv6: fill rt6i_gateway with nexthop address Make sure rt6i_gateway contains nexthop information in all routes returned from lookup or when routes are directly attached to skb for generated ICMP packets. The effect of this patch should be a faster version of rt6_nexthop() and the consideration of local addresses as nexthop. Signed-off-by: Julian Anastasov Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/net/ip6_route.h | 6 ++---- net/ipv6/ip6_output.c | 4 ++-- net/ipv6/route.c | 8 ++++++-- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 481404abdf65..2b786b7e3585 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -194,11 +194,9 @@ static inline int ip6_skb_dst_mtu(struct sk_buff *skb) skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb)); } -static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt, struct in6_addr *dest) +static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt) { - if (rt->rt6i_flags & RTF_GATEWAY || !ipv6_addr_any(&rt->rt6i_gateway)) - return &rt->rt6i_gateway; - return dest; + return &rt->rt6i_gateway; } #endif diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 975624b8d2ea..91fb4e8212f5 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -105,7 +105,7 @@ static int ip6_finish_output2(struct sk_buff *skb) } rcu_read_lock_bh(); - nexthop = rt6_nexthop((struct rt6_info *)dst, &ipv6_hdr(skb)->daddr); + nexthop = rt6_nexthop((struct rt6_info *)dst); neigh = __ipv6_neigh_lookup_noref(dst->dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&nd_tbl, nexthop, dst->dev, false); @@ -874,7 +874,7 @@ static int ip6_dst_lookup_tail(struct sock *sk, */ rt = (struct rt6_info *) *dst; rcu_read_lock_bh(); - n = __ipv6_neigh_lookup_noref(rt->dst.dev, rt6_nexthop(rt, &fl6->daddr)); + n = __ipv6_neigh_lookup_noref(rt->dst.dev, rt6_nexthop(rt)); err = n && !(n->nud_state & NUD_VALID) ? -EINVAL : 0; rcu_read_unlock_bh(); diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c979dd96d82a..c1ee3813e1ae 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -851,7 +851,6 @@ static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, if (ort->rt6i_dst.plen != 128 && ipv6_addr_equal(&ort->rt6i_dst.addr, daddr)) rt->rt6i_flags |= RTF_ANYCAST; - rt->rt6i_gateway = *daddr; } rt->rt6i_flags |= RTF_CACHE; @@ -1338,6 +1337,7 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev, rt->dst.flags |= DST_HOST; rt->dst.output = ip6_output; atomic_set(&rt->dst.__refcnt, 1); + rt->rt6i_gateway = fl6->daddr; rt->rt6i_dst.addr = fl6->daddr; rt->rt6i_dst.plen = 128; rt->rt6i_idev = idev; @@ -1873,7 +1873,10 @@ static struct rt6_info *ip6_rt_copy(struct rt6_info *ort, in6_dev_hold(rt->rt6i_idev); rt->dst.lastuse = jiffies; - rt->rt6i_gateway = ort->rt6i_gateway; + if (ort->rt6i_flags & RTF_GATEWAY) + rt->rt6i_gateway = ort->rt6i_gateway; + else + rt->rt6i_gateway = *dest; rt->rt6i_flags = ort->rt6i_flags; if ((ort->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF)) == (RTF_DEFAULT | RTF_ADDRCONF)) @@ -2160,6 +2163,7 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, else rt->rt6i_flags |= RTF_LOCAL; + rt->rt6i_gateway = *addr; rt->rt6i_dst.addr = *addr; rt->rt6i_dst.plen = 128; rt->rt6i_table = fib6_get_table(net, RT6_TABLE_LOCAL); -- cgit v1.2.2 From 56e42441ed54b092d6c7411138ce60d049e7c731 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Sun, 20 Oct 2013 15:43:05 +0300 Subject: netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper Now when rt6_nexthop() can return nexthop address we can use it for proper nexthop comparison of directly connected destinations. For more information refer to commit bbb5823cf742a7 ("netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper"). Signed-off-by: Julian Anastasov Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_h323_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index bdebd03bc8cd..70866d192efc 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -778,8 +778,8 @@ static int callforward_do_filter(const union nf_inet_addr *src, flowi6_to_flowi(&fl1), false)) { if (!afinfo->route(&init_net, (struct dst_entry **)&rt2, flowi6_to_flowi(&fl2), false)) { - if (!memcmp(&rt1->rt6i_gateway, &rt2->rt6i_gateway, - sizeof(rt1->rt6i_gateway)) && + if (ipv6_addr_equal(rt6_nexthop(rt1), + rt6_nexthop(rt2)) && rt1->dst.dev == rt2->dst.dev) ret = 1; dst_release(&rt2->dst); -- cgit v1.2.2 From c2f17e827b419918c856131f592df9521e1a38e3 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Mon, 21 Oct 2013 06:17:15 +0200 Subject: ipv6: probe routes asynchronous in rt6_probe Routes need to be probed asynchronous otherwise the call stack gets exhausted when the kernel attemps to deliver another skb inline, like e.g. xt_TEE does, and we probe at the same time. We update neigh->updated still at once, otherwise we would send to many probes. Cc: Julian Anastasov Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/route.c | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c1ee3813e1ae..f54e3a101098 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -476,6 +476,24 @@ out: } #ifdef CONFIG_IPV6_ROUTER_PREF +struct __rt6_probe_work { + struct work_struct work; + struct in6_addr target; + struct net_device *dev; +}; + +static void rt6_probe_deferred(struct work_struct *w) +{ + struct in6_addr mcaddr; + struct __rt6_probe_work *work = + container_of(w, struct __rt6_probe_work, work); + + addrconf_addr_solict_mult(&work->target, &mcaddr); + ndisc_send_ns(work->dev, NULL, &work->target, &mcaddr, NULL); + dev_put(work->dev); + kfree(w); +} + static void rt6_probe(struct rt6_info *rt) { struct neighbour *neigh; @@ -499,17 +517,23 @@ static void rt6_probe(struct rt6_info *rt) if (!neigh || time_after(jiffies, neigh->updated + rt->rt6i_idev->cnf.rtr_probe_interval)) { - struct in6_addr mcaddr; - struct in6_addr *target; + struct __rt6_probe_work *work; + + work = kmalloc(sizeof(*work), GFP_ATOMIC); - if (neigh) { + if (neigh && work) neigh->updated = jiffies; + + if (neigh) write_unlock(&neigh->lock); - } - target = (struct in6_addr *)&rt->rt6i_gateway; - addrconf_addr_solict_mult(target, &mcaddr); - ndisc_send_ns(rt->dst.dev, NULL, target, &mcaddr, NULL); + if (work) { + INIT_WORK(&work->work, rt6_probe_deferred); + work->target = rt->rt6i_gateway; + dev_hold(rt->dst.dev); + work->dev = rt->dst.dev; + schedule_work(&work->work); + } } else { out: write_unlock(&neigh->lock); -- cgit v1.2.2 From 7e4d8a193f2f1b551dc8d10acca6aea4356f3b86 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 21 Oct 2013 19:09:58 +0200 Subject: mac802154: correct a typo in ieee802154_alloc_device() prototype This has no other impact than a cosmetic one. Signed-off-by: Alexandre Belloni Signed-off-by: David S. Miller --- include/net/mac802154.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/mac802154.h b/include/net/mac802154.h index d0d11df9cba1..807d6b7a943f 100644 --- a/include/net/mac802154.h +++ b/include/net/mac802154.h @@ -133,7 +133,7 @@ struct ieee802154_ops { /* Basic interface to register ieee802154 device */ struct ieee802154_dev * -ieee802154_alloc_device(size_t priv_data_lex, struct ieee802154_ops *ops); +ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops); void ieee802154_free_device(struct ieee802154_dev *dev); int ieee802154_register_device(struct ieee802154_dev *dev); void ieee802154_unregister_device(struct ieee802154_dev *dev); -- cgit v1.2.2 From d69e0f7ea95fef8059251325a79c004bac01f018 Mon Sep 17 00:00:00 2001 From: Mariusz Ceier Date: Mon, 21 Oct 2013 19:45:04 +0200 Subject: davinci_emac.c: Fix IFF_ALLMULTI setup When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't, emac_dev_mcast_set should only enable RX of multicasts and reset MACHASH registers. It does this, but afterwards it either sets up multicast MACs filtering or disables RX of multicasts and resets MACHASH registers again, rendering IFF_ALLMULTI flag useless. This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set. Tested with kernel 2.6.37. Signed-off-by: Mariusz Ceier Acked-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 67df09ea9d04..6a32ef9d63ae 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -876,8 +876,7 @@ static void emac_dev_mcast_set(struct net_device *ndev) netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) { mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL); - } - if (!netdev_mc_empty(ndev)) { + } else if (!netdev_mc_empty(ndev)) { struct netdev_hw_addr *ha; mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); -- cgit v1.2.2 From 02cf4ebd82ff0ac7254b88e466820a290ed8289a Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Mon, 21 Oct 2013 15:40:19 -0400 Subject: tcp: initialize passive-side sk_pacing_rate after 3WHS For passive TCP connections, upon receiving the ACK that completes the 3WHS, make sure we set our pacing rate after we get our first RTT sample. On passive TCP connections, when we receive the ACK completing the 3WHS we do not take an RTT sample in tcp_ack(), but rather in tcp_synack_rtt_meas(). So upon receiving the ACK that completes the 3WHS, tcp_ack() leaves sk_pacing_rate at its initial value. Originally the initial sk_pacing_rate value was 0, so passive-side connections defaulted to sysctl_tcp_min_tso_segs (2 segs) in skbuffs made in the first RTT. With a default initial cwnd of 10 packets, this happened to be correct for RTTs 5ms or bigger, so it was hard to see problems in WAN or emulated WAN testing. Since 7eec4174ff ("pkt_sched: fq: fix non TCP flows pacing"), the initial sk_pacing_rate is 0xffffffff. So after that change, passive TCP connections were keeping this value (and using large numbers of segments per skbuff) until receiving an ACK for data. Signed-off-by: Neal Cardwell Cc: Eric Dumazet Cc: Yuchung Cheng Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 53974c7c04fe..a16b01b537ba 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5712,6 +5712,8 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, } else tcp_init_metrics(sk); + tcp_update_pacing_rate(sk); + /* Prevent spurious tcp_cwnd_restart() on first data packet */ tp->lsndtime = tcp_time_stamp; -- cgit v1.2.2 From 454594f3b93a49ef568cd190c5af31376b105a7b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Sun, 20 Oct 2013 00:58:57 +0200 Subject: Revert "bridge: only expire the mdb entry when query is received" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af3b) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd93d5ee534fdf23505ab091b2b9088edc. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b. ==================== CC: Cong Wang Signed-off-by: Linus Lüssing Reviewed-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/bridge/br_mdb.c | 2 +- net/bridge/br_multicast.c | 47 +++++++++++++++++++++++++++-------------------- net/bridge/br_private.h | 1 - 3 files changed, 28 insertions(+), 22 deletions(-) diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c index 85a09bb5ca51..b7b1914dfa25 100644 --- a/net/bridge/br_mdb.c +++ b/net/bridge/br_mdb.c @@ -453,7 +453,7 @@ static int __br_mdb_del(struct net_bridge *br, struct br_mdb_entry *entry) call_rcu_bh(&p->rcu, br_multicast_free_pg); err = 0; - if (!mp->ports && !mp->mglist && mp->timer_armed && + if (!mp->ports && !mp->mglist && netif_running(br->dev)) mod_timer(&mp->timer, jiffies); break; diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 1085f2180f3a..8b0b610ca2c9 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -272,7 +272,7 @@ static void br_multicast_del_pg(struct net_bridge *br, del_timer(&p->timer); call_rcu_bh(&p->rcu, br_multicast_free_pg); - if (!mp->ports && !mp->mglist && mp->timer_armed && + if (!mp->ports && !mp->mglist && netif_running(br->dev)) mod_timer(&mp->timer, jiffies); @@ -611,9 +611,6 @@ rehash: break; default: - /* If we have an existing entry, update it's expire timer */ - mod_timer(&mp->timer, - jiffies + br->multicast_membership_interval); goto out; } @@ -623,7 +620,6 @@ rehash: mp->br = br; mp->addr = *group; - setup_timer(&mp->timer, br_multicast_group_expired, (unsigned long)mp); @@ -663,6 +659,7 @@ static int br_multicast_add_group(struct net_bridge *br, struct net_bridge_mdb_entry *mp; struct net_bridge_port_group *p; struct net_bridge_port_group __rcu **pp; + unsigned long now = jiffies; int err; spin_lock(&br->multicast_lock); @@ -677,18 +674,15 @@ static int br_multicast_add_group(struct net_bridge *br, if (!port) { mp->mglist = true; + mod_timer(&mp->timer, now + br->multicast_membership_interval); goto out; } for (pp = &mp->ports; (p = mlock_dereference(*pp, br)) != NULL; pp = &p->next) { - if (p->port == port) { - /* We already have a portgroup, update the timer. */ - mod_timer(&p->timer, - jiffies + br->multicast_membership_interval); - goto out; - } + if (p->port == port) + goto found; if ((unsigned long)p->port < (unsigned long)port) break; } @@ -699,6 +693,8 @@ static int br_multicast_add_group(struct net_bridge *br, rcu_assign_pointer(*pp, p); br_mdb_notify(br->dev, port, group, RTM_NEWMDB); +found: + mod_timer(&p->timer, now + br->multicast_membership_interval); out: err = 0; @@ -1198,9 +1194,6 @@ static int br_ip4_multicast_query(struct net_bridge *br, if (!mp) goto out; - mod_timer(&mp->timer, now + br->multicast_membership_interval); - mp->timer_armed = true; - max_delay *= br->multicast_last_member_count; if (mp->mglist && @@ -1277,9 +1270,6 @@ static int br_ip6_multicast_query(struct net_bridge *br, if (!mp) goto out; - mod_timer(&mp->timer, now + br->multicast_membership_interval); - mp->timer_armed = true; - max_delay *= br->multicast_last_member_count; if (mp->mglist && (timer_pending(&mp->timer) ? @@ -1365,7 +1355,7 @@ static void br_multicast_leave_group(struct net_bridge *br, call_rcu_bh(&p->rcu, br_multicast_free_pg); br_mdb_notify(br->dev, port, group, RTM_DELMDB); - if (!mp->ports && !mp->mglist && mp->timer_armed && + if (!mp->ports && !mp->mglist && netif_running(br->dev)) mod_timer(&mp->timer, jiffies); } @@ -1377,12 +1367,30 @@ static void br_multicast_leave_group(struct net_bridge *br, br->multicast_last_member_interval; if (!port) { - if (mp->mglist && mp->timer_armed && + if (mp->mglist && (timer_pending(&mp->timer) ? time_after(mp->timer.expires, time) : try_to_del_timer_sync(&mp->timer) >= 0)) { mod_timer(&mp->timer, time); } + + goto out; + } + + for (p = mlock_dereference(mp->ports, br); + p != NULL; + p = mlock_dereference(p->next, br)) { + if (p->port != port) + continue; + + if (!hlist_unhashed(&p->mglist) && + (timer_pending(&p->timer) ? + time_after(p->timer.expires, time) : + try_to_del_timer_sync(&p->timer) >= 0)) { + mod_timer(&p->timer, time); + } + + break; } out: spin_unlock(&br->multicast_lock); @@ -1805,7 +1813,6 @@ void br_multicast_stop(struct net_bridge *br) hlist_for_each_entry_safe(mp, n, &mdb->mhash[i], hlist[ver]) { del_timer(&mp->timer); - mp->timer_armed = false; call_rcu_bh(&mp->rcu, br_multicast_free_group); } } diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 7ca2ae45b2d5..e14c33b42f75 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -126,7 +126,6 @@ struct net_bridge_mdb_entry struct timer_list timer; struct br_ip addr; bool mglist; - bool timer_armed; }; struct net_bridge_mdb_htable -- cgit v1.2.2 From 7e78b83cb95dd2c3a6c829c5d861d515c1d817a5 Mon Sep 17 00:00:00 2001 From: Freddy Xin Date: Tue, 22 Oct 2013 15:32:10 +0800 Subject: ax88179_178a: Correct the RX error definition in RX header Correct the definition of AX_RXHDR_CRC_ERR and AX_RXHDR_DROP_ERR. They are BIT29 and BIT31 in pkt_hdr seperately. Signed-off-by: Freddy Xin Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 3569293df872..3bcd0d9a6f82 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -36,8 +36,8 @@ #define AX_RXHDR_L4_TYPE_TCP 16 #define AX_RXHDR_L3CSUM_ERR 2 #define AX_RXHDR_L4CSUM_ERR 1 -#define AX_RXHDR_CRC_ERR ((u32)BIT(31)) -#define AX_RXHDR_DROP_ERR ((u32)BIT(30)) +#define AX_RXHDR_CRC_ERR ((u32)BIT(29)) +#define AX_RXHDR_DROP_ERR ((u32)BIT(31)) #define AX_ACCESS_MAC 0x01 #define AX_ACCESS_PHY 0x02 #define AX_ACCESS_EEPROM 0x04 -- cgit v1.2.2 From f11a5bc148a313ad37c361c87c9aff2331a8b149 Mon Sep 17 00:00:00 2001 From: Freddy Xin Date: Tue, 22 Oct 2013 15:32:11 +0800 Subject: ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter Add VID:DID for Samsung USB Ethernet Adapter. Signed-off-by: Freddy Xin Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 3bcd0d9a6f82..846cc19c04f2 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1406,6 +1406,19 @@ static const struct driver_info sitecom_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info samsung_info = { + .description = "Samsung USB Ethernet Adapter", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .stop = ax88179_stop, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct usb_device_id products[] = { { /* ASIX AX88179 10/100/1000 */ @@ -1418,7 +1431,11 @@ static const struct usb_device_id products[] = { }, { /* Sitecom USB 3.0 to Gigabit Adapter */ USB_DEVICE(0x0df6, 0x0072), - .driver_info = (unsigned long) &sitecom_info, + .driver_info = (unsigned long)&sitecom_info, +}, { + /* Samsung USB Ethernet Adapter */ + USB_DEVICE(0x04e8, 0xa100), + .driver_info = (unsigned long)&samsung_info, }, { }, }; -- cgit v1.2.2