From d2d2c3731474614bff5cf47a605e59e847882f5d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 27 Feb 2009 13:07:33 +0000 Subject: sfc: Add support for QT2025C PHY This is a new PHY supporting SFP+ modules, used in the SFN4112F reference design. It is similar to the QT2022C2 and shares much of its support code. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/falcon.c | 1 + drivers/net/sfc/net_driver.h | 1 + drivers/net/sfc/phy.h | 4 +- drivers/net/sfc/xfp_phy.c | 95 ++++++++++++++++++++++++++++++++++++++++---- 4 files changed, 91 insertions(+), 10 deletions(-) diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d5378e60fcdd..9e2f0f0d47a8 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -2249,6 +2249,7 @@ static int falcon_probe_phy(struct efx_nic *efx) efx->phy_op = &falcon_sft9001_phy_ops; break; case PHY_TYPE_QT2022C2: + case PHY_TYPE_QT2025C: efx->phy_op = &falcon_xfp_phy_ops; break; default: diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 19930ff9df7b..eb768fcb3cc8 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -450,6 +450,7 @@ enum phy_type { PHY_TYPE_QT2022C2 = 4, PHY_TYPE_PM8358 = 6, PHY_TYPE_SFT9001A = 8, + PHY_TYPE_QT2025C = 9, PHY_TYPE_SFT9001B = 10, PHY_TYPE_MAX /* Insert any new items before this */ }; diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h index f6e47227d245..c1cff9c0c173 100644 --- a/drivers/net/sfc/phy.h +++ b/drivers/net/sfc/phy.h @@ -23,11 +23,11 @@ extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink); extern int sft9001_wait_boot(struct efx_nic *efx); /**************************************************************************** - * Exported functions from the driver for XFP optical PHYs + * AMCC/Quake QT20xx PHYs */ extern struct efx_phy_operations falcon_xfp_phy_ops; -/* The QUAKE XFP PHY provides various H/W control states for LEDs */ +/* These PHYs provide various H/W control states for LEDs */ #define QUAKE_LED_LINK_INVAL (0) #define QUAKE_LED_LINK_STAT (1) #define QUAKE_LED_LINK_ACT (2) diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c index 2df467d28064..bb1ef77d5f56 100644 --- a/drivers/net/sfc/xfp_phy.c +++ b/drivers/net/sfc/xfp_phy.c @@ -7,8 +7,8 @@ * by the Free Software Foundation, incorporated herein by reference. */ /* - * Driver for XFP optical PHYs (plus some support specific to the Quake 2022/32) - * See www.amcc.com for details (search for qt2032) + * Driver for SFP+ and XFP optical PHYs plus some support specific to the + * AMCC QT20xx adapters; see www.amcc.com for details */ #include @@ -31,6 +31,21 @@ /* Quake-specific MDIO registers */ #define MDIO_QUAKE_LED0_REG (0xD006) +/* QT2025C only */ +#define PCS_FW_HEARTBEAT_REG 0xd7ee +#define PCS_FW_HEARTB_LBN 0 +#define PCS_FW_HEARTB_WIDTH 8 +#define PCS_UC8051_STATUS_REG 0xd7fd +#define PCS_UC_STATUS_LBN 0 +#define PCS_UC_STATUS_WIDTH 8 +#define PCS_UC_STATUS_FW_SAVE 0x20 +#define PMA_PMD_FTX_CTRL2_REG 0xc309 +#define PMA_PMD_FTX_STATIC_LBN 13 +#define PMA_PMD_VEND1_REG 0xc001 +#define PMA_PMD_VEND1_LBTXD_LBN 15 +#define PCS_VEND1_REG 0xc000 +#define PCS_VEND1_LBTXD_LBN 5 + void xfp_set_led(struct efx_nic *p, int led, int mode) { int addr = MDIO_QUAKE_LED0_REG + led; @@ -45,7 +60,49 @@ struct xfp_phy_data { #define XFP_MAX_RESET_TIME 500 #define XFP_RESET_WAIT 10 -/* Reset the PHYXS MMD. This is documented (for the Quake PHY) as doing +static int qt2025c_wait_reset(struct efx_nic *efx) +{ + unsigned long timeout = jiffies + 10 * HZ; + int phy_id = efx->mii.phy_id; + int reg, old_counter = 0; + + /* Wait for firmware heartbeat to start */ + for (;;) { + int counter; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS, + PCS_FW_HEARTBEAT_REG); + if (reg < 0) + return reg; + counter = ((reg >> PCS_FW_HEARTB_LBN) & + ((1 << PCS_FW_HEARTB_WIDTH) - 1)); + if (old_counter == 0) + old_counter = counter; + else if (counter != old_counter) + break; + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + msleep(10); + } + + /* Wait for firmware status to look good */ + for (;;) { + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS, + PCS_UC8051_STATUS_REG); + if (reg < 0) + return reg; + if ((reg & + ((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >= + PCS_UC_STATUS_FW_SAVE) + break; + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + msleep(100); + } + + return 0; +} + +/* Reset the PHYXS MMD. This is documented (for the Quake PHYs) as doing * a complete soft reset. */ static int xfp_reset_phy(struct efx_nic *efx) @@ -58,6 +115,12 @@ static int xfp_reset_phy(struct efx_nic *efx) if (rc < 0) goto fail; + if (efx->phy_type == PHY_TYPE_QT2025C) { + rc = qt2025c_wait_reset(efx); + if (rc < 0) + goto fail; + } + /* Wait 250ms for the PHY to complete bootup */ msleep(250); @@ -131,12 +194,28 @@ static void xfp_phy_reconfigure(struct efx_nic *efx) { struct xfp_phy_data *phy_data = efx->phy_data; - /* Reset the PHY when moving from tx off to tx on */ - if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) && - (phy_data->phy_mode & PHY_MODE_TX_DISABLED)) - xfp_reset_phy(efx); + if (efx->phy_type == PHY_TYPE_QT2025C) { + /* There are several different register bits which can + * disable TX (and save power) on direct-attach cables + * or optical transceivers, varying somewhat between + * firmware versions. Only 'static mode' appears to + * cover everything. */ + mdio_clause45_set_flag( + efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, + PMA_PMD_FTX_CTRL2_REG, PMA_PMD_FTX_STATIC_LBN, + efx->phy_mode & PHY_MODE_TX_DISABLED || + efx->phy_mode & PHY_MODE_LOW_POWER || + efx->loopback_mode == LOOPBACK_PCS || + efx->loopback_mode == LOOPBACK_PMAPMD); + } else { + /* Reset the PHY when moving from tx off to tx on */ + if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) && + (phy_data->phy_mode & PHY_MODE_TX_DISABLED)) + xfp_reset_phy(efx); + + mdio_clause45_transmit_disable(efx); + } - mdio_clause45_transmit_disable(efx); mdio_clause45_phy_reconfigure(efx); phy_data->phy_mode = efx->phy_mode; -- cgit v1.2.2