From 816bb611e41be29b476dc16f6297eb551bf4d747 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Tue, 30 Dec 2008 14:46:02 -0800 Subject: cpuidle: Add decaying history logic to menu idle predictor Add decaying history of predicted idle time, instead of using the last early wakeup. This logic helps menu governor do better job of predicting idle time. With this change, we also measured noticable (~8%) power savings on a DP server system with CPUs supporting deep C states, when system was lightly loaded. There was no change to power or perf on other load conditions. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/cpuidle/governors/menu.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 8d7cf3f31450..f1df59f59a37 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -15,12 +15,14 @@ #include #define BREAK_FUZZ 4 /* 4 us */ +#define PRED_HISTORY_PCT 50 struct menu_device { int last_state_idx; unsigned int expected_us; unsigned int predicted_us; + unsigned int current_predicted_us; unsigned int last_measured_us; unsigned int elapsed_us; }; @@ -47,6 +49,12 @@ static int menu_select(struct cpuidle_device *dev) data->expected_us = (u32) ktime_to_ns(tick_nohz_get_sleep_length()) / 1000; + /* Recalculate predicted_us based on prediction_history_pct */ + data->predicted_us *= PRED_HISTORY_PCT; + data->predicted_us += (100 - PRED_HISTORY_PCT) * + data->current_predicted_us; + data->predicted_us /= 100; + /* find the deepest idle state that satisfies our constraints */ for (i = CPUIDLE_DRIVER_STATE_START + 1; i < dev->state_count; i++) { struct cpuidle_state *s = &dev->states[i]; @@ -97,7 +105,7 @@ static void menu_reflect(struct cpuidle_device *dev) measured_us = -1; /* Predict time until next break event */ - data->predicted_us = max(measured_us, data->last_measured_us); + data->current_predicted_us = max(measured_us, data->last_measured_us); if (last_idle_us + BREAK_FUZZ < data->expected_us - target->exit_latency) { -- cgit v1.2.2 From 11e93130c7ce5228d484fd5e86f3984835d4256b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 29 Dec 2008 19:19:07 +0100 Subject: ACPI: Do not modify SCI_EN directly According to the ACPI specification the SCI_EN flag is controlled by the hardware, which sets this flag to inform the kernel that ACPI is enabled. For this reason, we shouldn't try to modify SCI_EN directly. Also, we don't need to do it in irqrouter_resume(), since lower-level resume code takes care of enabling ACPI in case it hasn't been enabled by the BIOS before passing control to the kernel (which by the way is against the ACPI specification). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/pci_link.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index e52ad91ce2dc..e33c0bc78fa8 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -796,10 +796,6 @@ static int irqrouter_resume(struct sys_device *dev) struct list_head *node = NULL; struct acpi_pci_link *link = NULL; - - /* Make sure SCI is enabled again (Apple firmware bug?) */ - acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1); - list_for_each(node, &acpi_link.entries) { link = list_entry(node, struct acpi_pci_link, node); if (!link) { -- cgit v1.2.2 From 9e6dada9d255497127251c03aaa59296d186f959 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 31 Dec 2008 10:58:48 +0800 Subject: video: always update the brightness when poking "brightness" always update props.brightness no matter the backlight is changed via procfs, hotkeys or sysfs. Sighed-off-by: Zhang Rui Acked-by: Matthew Garrett Signed-off-by: Len Brown --- drivers/acpi/video.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index baa441929720..66a610d0e2f5 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -481,6 +481,7 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level) int status = AE_OK; union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list args = { 1, &arg0 }; + int state; arg0.integer.value = level; @@ -489,6 +490,10 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level) status = acpi_evaluate_object(device->dev->handle, "_BCM", &args, NULL); device->brightness->curr = level; + for (state = 2; state < device->brightness->count; state++) + if (level == device->brightness->levels[state]) + device->backlight->props.brightness = state - 2; + return status; } -- cgit v1.2.2 From 13b40a1a065824d2d4e55c8b48ea9f3f9d162929 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Sun, 4 Jan 2009 12:04:21 +0800 Subject: ACPI: Avoid array address overflow when _CST MWAIT hint bits are set The Cx Register address obtained from the _CST object is used as the MWAIT hints if the register type is FFixedHW. And it is used to check whether the Cx type is supported or not. On some boxes the following Cx state package is obtained from _CST object: >{ ResourceTemplate () { Register (FFixedHW, 0x01, // Bit Width 0x02, // Bit Offset 0x0000000000889759, // Address 0x03, // Access Size ) }, 0x03, 0xF5, 0x015E } In such case we should use the bit[7:4] of Cx address to check whether the Cx type is supported or not. mask the MWAIT hint to avoid array address overflow Signed-off-by: Zhao Yakui Acked-by:Venki Pallipadi Signed-off-by: Len Brown --- arch/x86/kernel/acpi/cstate.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index c2502eb9aa83..a4805b3b4095 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -56,6 +56,7 @@ static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */ static short mwait_supported[ACPI_PROCESSOR_MAX_POWER]; #define MWAIT_SUBSTATE_MASK (0xf) +#define MWAIT_CSTATE_MASK (0xf) #define MWAIT_SUBSTATE_SIZE (4) #define CPUID_MWAIT_LEAF (5) @@ -98,7 +99,8 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu, cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx); /* Check whether this particular cx_type (in CST) is supported or not */ - cstate_type = (cx->address >> MWAIT_SUBSTATE_SIZE) + 1; + cstate_type = ((cx->address >> MWAIT_SUBSTATE_SIZE) & + MWAIT_CSTATE_MASK) + 1; edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE); num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK; -- cgit v1.2.2 From 237889bf0a62f1399fb2ba0c2a259e6a96597131 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 17 Dec 2008 16:55:18 +0800 Subject: ACPI : Use RSDT instead of XSDT by adding boot option of "acpi=rsdt" On some boxes there exist both RSDT and XSDT table. But unfortunately sometimes there exists the following error when XSDT table is used: a. 32/64X address mismatch b. The 32/64X FACS address mismatch In such case the boot option of "acpi=rsdt" is provided so that RSDT is tried instead of XSDT table when the system can't work well. http://bugzilla.kernel.org/show_bug.cgi?id=8246 Signed-off-by: Zhao Yakui cc:Thomas Renninger Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 1 + arch/ia64/kernel/acpi.c | 1 + arch/x86/kernel/acpi/boot.c | 6 +++++- drivers/acpi/tables/tbutils.c | 3 ++- include/acpi/acpixf.h | 1 + 5 files changed, 10 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c9115c1b672c..136f02842de9 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -139,6 +139,7 @@ and is between 256 and 4096 characters. It is defined in the file ht -- run only enough ACPI to enable Hyper Threading strict -- Be less tolerant of platforms that are not strictly ACPI specification compliant. + rsdt -- prefer RSDT over (default) XSDT See also Documentation/power/pm.txt, pci=noacpi diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index bd7acc71e8a9..c19b686db9b8 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -65,6 +65,7 @@ EXPORT_SYMBOL(pm_idle); void (*pm_power_off) (void); EXPORT_SYMBOL(pm_power_off); +u32 acpi_rsdt_forced; unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 4c51a2f8fd31..db1a90a76b3e 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -47,7 +47,7 @@ #endif static int __initdata acpi_force = 0; - +u32 acpi_rsdt_forced; #ifdef CONFIG_ACPI int acpi_disabled = 0; #else @@ -1783,6 +1783,10 @@ static int __init parse_acpi(char *arg) disable_acpi(); acpi_ht = 1; } + /* acpi=rsdt use RSDT instead of XSDT */ + else if (strcmp(arg, "rsdt") == 0) { + acpi_rsdt_forced = 1; + } /* "acpi=noirq" disables ACPI interrupt routing */ else if (strcmp(arg, "noirq") == 0) { acpi_noirq_set(); diff --git a/drivers/acpi/tables/tbutils.c b/drivers/acpi/tables/tbutils.c index 0cc92ef5236f..da9f240186e8 100644 --- a/drivers/acpi/tables/tbutils.c +++ b/drivers/acpi/tables/tbutils.c @@ -420,7 +420,8 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) /* Differentiate between RSDT and XSDT root tables */ - if (rsdp->revision > 1 && rsdp->xsdt_physical_address) { + if (rsdp->revision > 1 && rsdp->xsdt_physical_address + && !acpi_rsdt_forced) { /* * Root table is an XSDT (64-bit physical addresses). We must use the * XSDT if the revision is > 1 and the XSDT pointer is present, as per diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 33bc0e3b1954..05d2614e0078 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -48,6 +48,7 @@ #include "actypes.h" #include "actbl.h" +extern u32 acpi_rsdt_forced; /* * Global interfaces */ -- cgit v1.2.2