From cc65185d400c4e8698ff1c1b59f90bd491e9bda5 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 10 Jul 2007 17:28:49 -0500 Subject: Add phy-connection-type to gianfar nodes The TSEC/eTSEC automatically detect their PHY interface type, unless the type is RGMII-ID (RGMII with internal delay). In that situation, it just detects RGMII. In order to fix this, we need to pass in rgmii-id if that is the connection type. Signed-off-by: Andy Fleming --- Documentation/powerpc/booting-without-of.txt | 6 ++++++ arch/powerpc/boot/dts/mpc8641_hpcn.dts | 4 ++++ 2 files changed, 10 insertions(+) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 0c2434822094..76733a3962f0 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1250,6 +1250,12 @@ platforms are moved over to use the flattened-device-tree model. network device. This is used by the bootwrapper to interpret MAC addresses passed by the firmware when no information other than indices is available to associate an address with a device. + - phy-connection-type : a string naming the controller/PHY interface type, + i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", + "tbi", or "rtbi". This property is only really needed if the connection + is of type "rgmii-id", as all other connection types are detected by + hardware. + Example: diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index db56a02b748f..6a78a2b37c08 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -131,6 +131,7 @@ interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; }; ethernet@25000 { @@ -150,6 +151,7 @@ interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; }; ethernet@26000 { @@ -169,6 +171,7 @@ interrupts = <1F 2 20 2 21 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; }; ethernet@27000 { @@ -188,6 +191,7 @@ interrupts = <25 2 26 2 27 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; }; serial@4500 { device_type = "serial"; -- cgit v1.2.2