From 50a323b73069b169385a8ac65633dee837a7d13f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 8 Jun 2010 21:40:36 +0200 Subject: sched: define and use CPU_PRI_* enums for cpu notifier priorities Instead of hardcoding priority 10 and 20 in sched and perf, collect them into CPU_PRI_* enums. Signed-off-by: Tejun Heo Acked-by: Peter Zijlstra Cc: Rusty Russell Cc: Paul Mackerras Cc: Ingo Molnar Cc: Arnaldo Carvalho de Melo --- include/linux/cpu.h | 9 +++++++++ include/linux/perf_event.h | 2 +- kernel/sched.c | 2 +- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/include/linux/cpu.h b/include/linux/cpu.h index e287863ac053..2d9073883ea9 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -48,6 +48,15 @@ extern ssize_t arch_cpu_release(const char *, size_t); #endif struct notifier_block; +/* + * CPU notifier priorities. + */ +enum { + /* migration should happen before other stuff but after perf */ + CPU_PRI_PERF = 20, + CPU_PRI_MIGRATION = 10, +}; + #ifdef CONFIG_SMP /* Need to know about CPUs going up/down? */ #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 5d0266d94985..469e03e96fe7 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1068,7 +1068,7 @@ static inline void perf_event_disable(struct perf_event *event) { } #define perf_cpu_notifier(fn) \ do { \ static struct notifier_block fn##_nb __cpuinitdata = \ - { .notifier_call = fn, .priority = 20 }; \ + { .notifier_call = fn, .priority = CPU_PRI_PERF }; \ fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \ (void *)(unsigned long)smp_processor_id()); \ fn(&fn##_nb, (unsigned long)CPU_STARTING, \ diff --git a/kernel/sched.c b/kernel/sched.c index f8b8996228dd..552faf8d358c 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5801,7 +5801,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu) */ static struct notifier_block __cpuinitdata migration_notifier = { .notifier_call = migration_call, - .priority = 10 + .priority = CPU_PRI_MIGRATION, }; static int __init migration_init(void) -- cgit v1.2.2 From 3a101d0548e925ab16ca6aaa8cf4f767d322ddb0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 8 Jun 2010 21:40:36 +0200 Subject: sched: adjust when cpu_active and cpuset configurations are updated during cpu on/offlining Currently, when a cpu goes down, cpu_active is cleared before CPU_DOWN_PREPARE starts and cpuset configuration is updated from a default priority cpu notifier. When a cpu is coming up, it's set before CPU_ONLINE but cpuset configuration again is updated from the same cpu notifier. For cpu notifiers, this presents an inconsistent state. Threads which a CPU_DOWN_PREPARE notifier expects to be bound to the CPU can be migrated to other cpus because the cpu is no more inactive. Fix it by updating cpu_active in the highest priority cpu notifier and cpuset configuration in the second highest when a cpu is coming up. Down path is updated similarly. This guarantees that all other cpu notifiers see consistent cpu_active and cpuset configuration. cpuset_track_online_cpus() notifier is converted to cpuset_update_active_cpus() which just updates the configuration and now called from cpuset_cpu_[in]active() notifiers registered from sched_init_smp(). If cpuset is disabled, cpuset_update_active_cpus() degenerates into partition_sched_domains() making separate notifier for !CONFIG_CPUSETS unnecessary. This problem is triggered by cmwq. During CPU_DOWN_PREPARE, hotplug callback creates a kthread and kthread_bind()s it to the target cpu, and the thread is expected to run on that cpu. * Ingo's test discovered __cpuinit/exit markups were incorrect. Fixed. Signed-off-by: Tejun Heo Acked-by: Peter Zijlstra Cc: Rusty Russell Cc: Ingo Molnar Cc: Paul Menage --- include/linux/cpu.h | 16 ++++++++++++ include/linux/cpuset.h | 6 +++++ kernel/cpu.c | 6 ----- kernel/cpuset.c | 21 ++-------------- kernel/sched.c | 67 +++++++++++++++++++++++++++++++++++++------------- 5 files changed, 74 insertions(+), 42 deletions(-) diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 2d9073883ea9..de6b1722cdca 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -52,6 +52,22 @@ struct notifier_block; * CPU notifier priorities. */ enum { + /* + * SCHED_ACTIVE marks a cpu which is coming up active during + * CPU_ONLINE and CPU_DOWN_FAILED and must be the first + * notifier. CPUSET_ACTIVE adjusts cpuset according to + * cpu_active mask right after SCHED_ACTIVE. During + * CPU_DOWN_PREPARE, SCHED_INACTIVE and CPUSET_INACTIVE are + * ordered in the similar way. + * + * This ordering guarantees consistent cpu_active mask and + * migration behavior to all cpu notifiers. + */ + CPU_PRI_SCHED_ACTIVE = INT_MAX, + CPU_PRI_CPUSET_ACTIVE = INT_MAX - 1, + CPU_PRI_SCHED_INACTIVE = INT_MIN + 1, + CPU_PRI_CPUSET_INACTIVE = INT_MIN, + /* migration should happen before other stuff but after perf */ CPU_PRI_PERF = 20, CPU_PRI_MIGRATION = 10, diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 457ed765a116..f20eb8f16025 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -20,6 +20,7 @@ extern int number_of_cpusets; /* How many cpusets are defined in system? */ extern int cpuset_init(void); extern void cpuset_init_smp(void); +extern void cpuset_update_active_cpus(void); extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask); extern int cpuset_cpus_allowed_fallback(struct task_struct *p); extern nodemask_t cpuset_mems_allowed(struct task_struct *p); @@ -132,6 +133,11 @@ static inline void set_mems_allowed(nodemask_t nodemask) static inline int cpuset_init(void) { return 0; } static inline void cpuset_init_smp(void) {} +static inline void cpuset_update_active_cpus(void) +{ + partition_sched_domains(1, NULL, NULL); +} + static inline void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask) { diff --git a/kernel/cpu.c b/kernel/cpu.c index 97d1b426a4ac..f6e726f18491 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -235,11 +235,8 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen) return -EINVAL; cpu_hotplug_begin(); - set_cpu_active(cpu, false); err = __cpu_notify(CPU_DOWN_PREPARE | mod, hcpu, -1, &nr_calls); if (err) { - set_cpu_active(cpu, true); - nr_calls--; __cpu_notify(CPU_DOWN_FAILED | mod, hcpu, nr_calls, NULL); printk("%s: attempt to take down CPU %u failed\n", @@ -249,7 +246,6 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen) err = __stop_machine(take_cpu_down, &tcd_param, cpumask_of(cpu)); if (err) { - set_cpu_active(cpu, true); /* CPU didn't die: tell everyone. Can't complain. */ cpu_notify_nofail(CPU_DOWN_FAILED | mod, hcpu); @@ -321,8 +317,6 @@ static int __cpuinit _cpu_up(unsigned int cpu, int tasks_frozen) goto out_notify; BUG_ON(!cpu_online(cpu)); - set_cpu_active(cpu, true); - /* Now call notifier in preparation. */ cpu_notify(CPU_ONLINE | mod, hcpu); diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 02b9611eadde..05727dcaa80d 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -2113,31 +2113,17 @@ static void scan_for_empty_cpusets(struct cpuset *root) * but making no active use of cpusets. * * This routine ensures that top_cpuset.cpus_allowed tracks - * cpu_online_map on each CPU hotplug (cpuhp) event. + * cpu_active_mask on each CPU hotplug (cpuhp) event. * * Called within get_online_cpus(). Needs to call cgroup_lock() * before calling generate_sched_domains(). */ -static int cpuset_track_online_cpus(struct notifier_block *unused_nb, - unsigned long phase, void *unused_cpu) +void __cpuexit cpuset_update_active_cpus(void) { struct sched_domain_attr *attr; cpumask_var_t *doms; int ndoms; - switch (phase) { - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: - case CPU_DOWN_FAILED: - case CPU_DOWN_FAILED_FROZEN: - break; - - default: - return NOTIFY_DONE; - } - cgroup_lock(); mutex_lock(&callback_mutex); cpumask_copy(top_cpuset.cpus_allowed, cpu_active_mask); @@ -2148,8 +2134,6 @@ static int cpuset_track_online_cpus(struct notifier_block *unused_nb, /* Have scheduler rebuild the domains */ partition_sched_domains(ndoms, doms, attr); - - return NOTIFY_OK; } #ifdef CONFIG_MEMORY_HOTPLUG @@ -2203,7 +2187,6 @@ void __init cpuset_init_smp(void) cpumask_copy(top_cpuset.cpus_allowed, cpu_active_mask); top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; - hotcpu_notifier(cpuset_track_online_cpus, 0); hotplug_memory_notifier(cpuset_track_online_nodes, 10); cpuset_wq = create_singlethread_workqueue("cpuset"); diff --git a/kernel/sched.c b/kernel/sched.c index 552faf8d358c..2b942e49d0fa 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5804,17 +5804,46 @@ static struct notifier_block __cpuinitdata migration_notifier = { .priority = CPU_PRI_MIGRATION, }; +static int __cpuinit sched_cpu_active(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_ONLINE: + case CPU_DOWN_FAILED: + set_cpu_active((long)hcpu, true); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } +} + +static int __cpuinit sched_cpu_inactive(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_DOWN_PREPARE: + set_cpu_active((long)hcpu, false); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } +} + static int __init migration_init(void) { void *cpu = (void *)(long)smp_processor_id(); int err; - /* Start one for the boot CPU: */ + /* Initialize migration for the boot CPU */ err = migration_call(&migration_notifier, CPU_UP_PREPARE, cpu); BUG_ON(err == NOTIFY_BAD); migration_call(&migration_notifier, CPU_ONLINE, cpu); register_cpu_notifier(&migration_notifier); + /* Register cpu active notifiers */ + cpu_notifier(sched_cpu_active, CPU_PRI_SCHED_ACTIVE); + cpu_notifier(sched_cpu_inactive, CPU_PRI_SCHED_INACTIVE); + return 0; } early_initcall(migration_init); @@ -7273,29 +7302,35 @@ int __init sched_create_sysfs_power_savings_entries(struct sysdev_class *cls) } #endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */ -#ifndef CONFIG_CPUSETS /* - * Add online and remove offline CPUs from the scheduler domains. - * When cpusets are enabled they take over this function. + * Update cpusets according to cpu_active mask. If cpusets are + * disabled, cpuset_update_active_cpus() becomes a simple wrapper + * around partition_sched_domains(). */ -static int update_sched_domains(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static int __cpuexit cpuset_cpu_active(struct notifier_block *nfb, + unsigned long action, void *hcpu) { - switch (action) { + switch (action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: case CPU_DOWN_FAILED: - case CPU_DOWN_FAILED_FROZEN: - partition_sched_domains(1, NULL, NULL); + cpuset_update_active_cpus(); return NOTIFY_OK; + default: + return NOTIFY_DONE; + } +} +static int __cpuexit cpuset_cpu_inactive(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_DOWN_PREPARE: + cpuset_update_active_cpus(); + return NOTIFY_OK; default: return NOTIFY_DONE; } } -#endif static int update_runtime(struct notifier_block *nfb, unsigned long action, void *hcpu) @@ -7341,10 +7376,8 @@ void __init sched_init_smp(void) mutex_unlock(&sched_domains_mutex); put_online_cpus(); -#ifndef CONFIG_CPUSETS - /* XXX: Theoretical race here - CPU may be hotplugged now */ - hotcpu_notifier(update_sched_domains, 0); -#endif + hotcpu_notifier(cpuset_cpu_active, CPU_PRI_CPUSET_ACTIVE); + hotcpu_notifier(cpuset_cpu_inactive, CPU_PRI_CPUSET_INACTIVE); /* RT runtime code needs to handle some hotplug events */ hotcpu_notifier(update_runtime, 0); -- cgit v1.2.2 From 9ed3811a6c0d6b66e6cd47a5d7b9136386dce743 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 3 Dec 2009 15:08:03 +0900 Subject: sched: refactor try_to_wake_up() Factor ttwu_activate() and ttwu_woken_up() out of try_to_wake_up(). The factoring out doesn't affect try_to_wake_up() much code-generation-wise. Depending on configuration options, it ends up generating the same object code as before or slightly different one due to different register assignment. This is to help future implementation of try_to_wake_up_local(). Mike Galbraith suggested rename to ttwu_post_activation() from ttwu_woken_up() and comment update in try_to_wake_up(). Signed-off-by: Tejun Heo Acked-by: Peter Zijlstra Cc: Mike Galbraith Cc: Ingo Molnar --- kernel/sched.c | 83 ++++++++++++++++++++++++++++++++++------------------------ 1 file changed, 49 insertions(+), 34 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 2b942e49d0fa..96eafd5f345f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2267,11 +2267,52 @@ static void update_avg(u64 *avg, u64 sample) } #endif -/*** +static inline void ttwu_activate(struct task_struct *p, struct rq *rq, + bool is_sync, bool is_migrate, bool is_local, + unsigned long en_flags) +{ + schedstat_inc(p, se.statistics.nr_wakeups); + if (is_sync) + schedstat_inc(p, se.statistics.nr_wakeups_sync); + if (is_migrate) + schedstat_inc(p, se.statistics.nr_wakeups_migrate); + if (is_local) + schedstat_inc(p, se.statistics.nr_wakeups_local); + else + schedstat_inc(p, se.statistics.nr_wakeups_remote); + + activate_task(rq, p, en_flags); +} + +static inline void ttwu_post_activation(struct task_struct *p, struct rq *rq, + int wake_flags, bool success) +{ + trace_sched_wakeup(p, success); + check_preempt_curr(rq, p, wake_flags); + + p->state = TASK_RUNNING; +#ifdef CONFIG_SMP + if (p->sched_class->task_woken) + p->sched_class->task_woken(rq, p); + + if (unlikely(rq->idle_stamp)) { + u64 delta = rq->clock - rq->idle_stamp; + u64 max = 2*sysctl_sched_migration_cost; + + if (delta > max) + rq->avg_idle = max; + else + update_avg(&rq->avg_idle, delta); + rq->idle_stamp = 0; + } +#endif +} + +/** * try_to_wake_up - wake up a thread - * @p: the to-be-woken-up thread + * @p: the thread to be awakened * @state: the mask of task states that can be woken - * @sync: do a synchronous wakeup? + * @wake_flags: wake modifier flags (WF_*) * * Put it on the run-queue if it's not already there. The "current" * thread is always on the run-queue (except when the actual @@ -2279,7 +2320,8 @@ static void update_avg(u64 *avg, u64 sample) * the simpler "current->state = TASK_RUNNING" to mark yourself * runnable without the overhead of this. * - * returns failure only if the task is already active. + * Returns %true if @p was woken up, %false if it was already running + * or @state didn't match @p's state. */ static int try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) @@ -2359,38 +2401,11 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, out_activate: #endif /* CONFIG_SMP */ - schedstat_inc(p, se.statistics.nr_wakeups); - if (wake_flags & WF_SYNC) - schedstat_inc(p, se.statistics.nr_wakeups_sync); - if (orig_cpu != cpu) - schedstat_inc(p, se.statistics.nr_wakeups_migrate); - if (cpu == this_cpu) - schedstat_inc(p, se.statistics.nr_wakeups_local); - else - schedstat_inc(p, se.statistics.nr_wakeups_remote); - activate_task(rq, p, en_flags); + ttwu_activate(p, rq, wake_flags & WF_SYNC, orig_cpu != cpu, + cpu == this_cpu, en_flags); success = 1; - out_running: - trace_sched_wakeup(p, success); - check_preempt_curr(rq, p, wake_flags); - - p->state = TASK_RUNNING; -#ifdef CONFIG_SMP - if (p->sched_class->task_woken) - p->sched_class->task_woken(rq, p); - - if (unlikely(rq->idle_stamp)) { - u64 delta = rq->clock - rq->idle_stamp; - u64 max = 2*sysctl_sched_migration_cost; - - if (delta > max) - rq->avg_idle = max; - else - update_avg(&rq->avg_idle, delta); - rq->idle_stamp = 0; - } -#endif + ttwu_post_activation(p, rq, wake_flags, success); out: task_rq_unlock(rq, &flags); put_cpu(); -- cgit v1.2.2 From 21aa9af03d06cb1d19a3738e5cf12acff984e69b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 8 Jun 2010 21:40:37 +0200 Subject: sched: add hooks for workqueue Concurrency managed workqueue needs to know when workers are going to sleep and waking up. Using these two hooks, cmwq keeps track of the current concurrency level and throttles execution of new works if it's too high and wakes up another worker from the sleep hook if it becomes too low. This patch introduces PF_WQ_WORKER to identify workqueue workers and adds the following two hooks. * wq_worker_waking_up(): called when a worker is woken up. * wq_worker_sleeping(): called when a worker is going to sleep and may return a pointer to a local task which should be woken up. The returned task is woken up using try_to_wake_up_local() which is simplified ttwu which is called under rq lock and can only wake up local tasks. Both hooks are currently defined as noop in kernel/workqueue_sched.h. Later cmwq implementation will replace them with proper implementation. These hooks are hard coded as they'll always be enabled. Signed-off-by: Tejun Heo Acked-by: Peter Zijlstra Cc: Mike Galbraith Cc: Ingo Molnar --- include/linux/sched.h | 1 + kernel/fork.c | 2 +- kernel/sched.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++-- kernel/workqueue_sched.h | 16 +++++++++++++++ 4 files changed, 69 insertions(+), 3 deletions(-) create mode 100644 kernel/workqueue_sched.h diff --git a/include/linux/sched.h b/include/linux/sched.h index f118809c953f..edc3dd168d87 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1696,6 +1696,7 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t * #define PF_EXITING 0x00000004 /* getting shut down */ #define PF_EXITPIDONE 0x00000008 /* pi exit done on shut down */ #define PF_VCPU 0x00000010 /* I'm a virtual CPU */ +#define PF_WQ_WORKER 0x00000020 /* I'm a workqueue worker */ #define PF_FORKNOEXEC 0x00000040 /* forked but didn't exec */ #define PF_MCE_PROCESS 0x00000080 /* process policy on mce errors */ #define PF_SUPERPRIV 0x00000100 /* used super-user privileges */ diff --git a/kernel/fork.c b/kernel/fork.c index b6cce14ba047..a82a65cef741 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -907,7 +907,7 @@ static void copy_flags(unsigned long clone_flags, struct task_struct *p) { unsigned long new_flags = p->flags; - new_flags &= ~PF_SUPERPRIV; + new_flags &= ~(PF_SUPERPRIV | PF_WQ_WORKER); new_flags |= PF_FORKNOEXEC; new_flags |= PF_STARTING; p->flags = new_flags; diff --git a/kernel/sched.c b/kernel/sched.c index 96eafd5f345f..edd5a54b95da 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -77,6 +77,7 @@ #include #include "sched_cpupri.h" +#include "workqueue_sched.h" #define CREATE_TRACE_POINTS #include @@ -2306,6 +2307,9 @@ static inline void ttwu_post_activation(struct task_struct *p, struct rq *rq, rq->idle_stamp = 0; } #endif + /* if a worker is waking up, notify workqueue */ + if ((p->flags & PF_WQ_WORKER) && success) + wq_worker_waking_up(p, cpu_of(rq)); } /** @@ -2413,6 +2417,37 @@ out: return success; } +/** + * try_to_wake_up_local - try to wake up a local task with rq lock held + * @p: the thread to be awakened + * + * Put @p on the run-queue if it's not alredy there. The caller must + * ensure that this_rq() is locked, @p is bound to this_rq() and not + * the current task. this_rq() stays locked over invocation. + */ +static void try_to_wake_up_local(struct task_struct *p) +{ + struct rq *rq = task_rq(p); + bool success = false; + + BUG_ON(rq != this_rq()); + BUG_ON(p == current); + lockdep_assert_held(&rq->lock); + + if (!(p->state & TASK_NORMAL)) + return; + + if (!p->se.on_rq) { + if (likely(!task_running(rq, p))) { + schedstat_inc(rq, ttwu_count); + schedstat_inc(rq, ttwu_local); + } + ttwu_activate(p, rq, false, false, true, ENQUEUE_WAKEUP); + success = true; + } + ttwu_post_activation(p, rq, 0, success); +} + /** * wake_up_process - Wake up a specific process * @p: The process to be woken up. @@ -3618,10 +3653,24 @@ need_resched_nonpreemptible: clear_tsk_need_resched(prev); if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) { - if (unlikely(signal_pending_state(prev->state, prev))) + if (unlikely(signal_pending_state(prev->state, prev))) { prev->state = TASK_RUNNING; - else + } else { + /* + * If a worker is going to sleep, notify and + * ask workqueue whether it wants to wake up a + * task to maintain concurrency. If so, wake + * up the task. + */ + if (prev->flags & PF_WQ_WORKER) { + struct task_struct *to_wakeup; + + to_wakeup = wq_worker_sleeping(prev, cpu); + if (to_wakeup) + try_to_wake_up_local(to_wakeup); + } deactivate_task(rq, prev, DEQUEUE_SLEEP); + } switch_count = &prev->nvcsw; } diff --git a/kernel/workqueue_sched.h b/kernel/workqueue_sched.h new file mode 100644 index 000000000000..af040babb742 --- /dev/null +++ b/kernel/workqueue_sched.h @@ -0,0 +1,16 @@ +/* + * kernel/workqueue_sched.h + * + * Scheduler hooks for concurrency managed workqueue. Only to be + * included from sched.c and workqueue.c. + */ +static inline void wq_worker_waking_up(struct task_struct *task, + unsigned int cpu) +{ +} + +static inline struct task_struct *wq_worker_sleeping(struct task_struct *task, + unsigned int cpu) +{ + return NULL; +} -- cgit v1.2.2 From c676329abb2b8359d9a5d734dec0c81779823fd6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 25 May 2010 10:48:51 +0200 Subject: sched_clock: Add local_clock() API and improve documentation For people who otherwise get to write: cpu_clock(smp_processor_id()), there is now: local_clock(). Also, as per suggestion from Andrew, provide some documentation on the various clock interfaces, and minimize the unsigned long long vs u64 mess. Signed-off-by: Peter Zijlstra Cc: Andrew Morton Cc: Linus Torvalds Cc: Jens Axboe LKML-Reference: <1275052414.1645.52.camel@laptop> Signed-off-by: Ingo Molnar --- arch/parisc/kernel/ftrace.c | 4 +- include/linux/sched.h | 37 ++++++++++-------- kernel/lockdep.c | 2 +- kernel/perf_event.c | 2 +- kernel/rcutorture.c | 3 +- kernel/sched.c | 2 +- kernel/sched_clock.c | 95 ++++++++++++++++++++++++++++++++++++++++----- kernel/trace/trace_clock.c | 2 +- 8 files changed, 113 insertions(+), 34 deletions(-) diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c index 9877372ffdba..5beb97bafbb1 100644 --- a/arch/parisc/kernel/ftrace.c +++ b/arch/parisc/kernel/ftrace.c @@ -82,7 +82,7 @@ unsigned long ftrace_return_to_handler(unsigned long retval0, unsigned long ret; pop_return_trace(&trace, &ret); - trace.rettime = cpu_clock(raw_smp_processor_id()); + trace.rettime = local_clock(); ftrace_graph_return(&trace); if (unlikely(!ret)) { @@ -126,7 +126,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) return; } - calltime = cpu_clock(raw_smp_processor_id()); + calltime = local_clock(); if (push_return_trace(old, calltime, self_addr, &trace.depth) == -EBUSY) { diff --git a/include/linux/sched.h b/include/linux/sched.h index edc3dd168d87..c2d4316a04bb 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1791,20 +1791,23 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) #endif /* - * Architectures can set this to 1 if they have specified - * CONFIG_HAVE_UNSTABLE_SCHED_CLOCK in their arch Kconfig, - * but then during bootup it turns out that sched_clock() - * is reliable after all: + * Do not use outside of architecture code which knows its limitations. + * + * sched_clock() has no promise of monotonicity or bounded drift between + * CPUs, use (which you should not) requires disabling IRQs. + * + * Please use one of the three interfaces below. */ -#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK -extern int sched_clock_stable; -#endif - -/* ftrace calls sched_clock() directly */ extern unsigned long long notrace sched_clock(void); +/* + * See the comment in kernel/sched_clock.c + */ +extern u64 cpu_clock(int cpu); +extern u64 local_clock(void); +extern u64 sched_clock_cpu(int cpu); + extern void sched_clock_init(void); -extern u64 sched_clock_cpu(int cpu); #ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK static inline void sched_clock_tick(void) @@ -1819,17 +1822,19 @@ static inline void sched_clock_idle_wakeup_event(u64 delta_ns) { } #else +/* + * Architectures can set this to 1 if they have specified + * CONFIG_HAVE_UNSTABLE_SCHED_CLOCK in their arch Kconfig, + * but then during bootup it turns out that sched_clock() + * is reliable after all: + */ +extern int sched_clock_stable; + extern void sched_clock_tick(void); extern void sched_clock_idle_sleep_event(void); extern void sched_clock_idle_wakeup_event(u64 delta_ns); #endif -/* - * For kernel-internal use: high-speed (but slightly incorrect) per-cpu - * clock constructed from sched_clock(): - */ -extern unsigned long long cpu_clock(int cpu); - extern unsigned long long task_sched_runtime(struct task_struct *task); extern unsigned long long thread_group_sched_runtime(struct task_struct *task); diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 54286798c37b..f2852a510232 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -146,7 +146,7 @@ static DEFINE_PER_CPU(struct lock_class_stats[MAX_LOCKDEP_KEYS], static inline u64 lockstat_clock(void) { - return cpu_clock(smp_processor_id()); + return local_clock(); } static int lock_point(unsigned long points[], unsigned long ip) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 31d6afe92594..109c5ec88933 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -214,7 +214,7 @@ static void perf_unpin_context(struct perf_event_context *ctx) static inline u64 perf_clock(void) { - return cpu_clock(raw_smp_processor_id()); + return local_clock(); } /* diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index 6535ac8bc6a5..2e2726d790b9 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -239,8 +239,7 @@ static unsigned long rcu_random(struct rcu_random_state *rrsp) { if (--rrsp->rrs_count < 0) { - rrsp->rrs_state += - (unsigned long)cpu_clock(raw_smp_processor_id()); + rrsp->rrs_state += (unsigned long)local_clock(); rrsp->rrs_count = RCU_RANDOM_REFRESH; } rrsp->rrs_state = rrsp->rrs_state * RCU_RANDOM_MULT + RCU_RANDOM_ADD; diff --git a/kernel/sched.c b/kernel/sched.c index 8f351c56567f..3abd8f780dae 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1647,7 +1647,7 @@ static void update_shares(struct sched_domain *sd) if (root_task_group_empty()) return; - now = cpu_clock(raw_smp_processor_id()); + now = local_clock(); elapsed = now - sd->last_update; if (elapsed >= (s64)(u64)sysctl_sched_shares_ratelimit) { diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 906a0f718cb3..52f1a149bfb1 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -10,19 +10,55 @@ * Ingo Molnar * Guillaume Chazarain * - * Create a semi stable clock from a mixture of other events, including: - * - gtod + * + * What: + * + * cpu_clock(i) provides a fast (execution time) high resolution + * clock with bounded drift between CPUs. The value of cpu_clock(i) + * is monotonic for constant i. The timestamp returned is in nanoseconds. + * + * ######################### BIG FAT WARNING ########################## + * # when comparing cpu_clock(i) to cpu_clock(j) for i != j, time can # + * # go backwards !! # + * #################################################################### + * + * There is no strict promise about the base, although it tends to start + * at 0 on boot (but people really shouldn't rely on that). + * + * cpu_clock(i) -- can be used from any context, including NMI. + * sched_clock_cpu(i) -- must be used with local IRQs disabled (implied by NMI) + * local_clock() -- is cpu_clock() on the current cpu. + * + * How: + * + * The implementation either uses sched_clock() when + * !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK, which means in that case the + * sched_clock() is assumed to provide these properties (mostly it means + * the architecture provides a globally synchronized highres time source). + * + * Otherwise it tries to create a semi stable clock from a mixture of other + * clocks, including: + * + * - GTOD (clock monotomic) * - sched_clock() * - explicit idle events * - * We use gtod as base and the unstable clock deltas. The deltas are filtered, - * making it monotonic and keeping it within an expected window. + * We use GTOD as base and use sched_clock() deltas to improve resolution. The + * deltas are filtered to provide monotonicity and keeping it within an + * expected window. * * Furthermore, explicit sleep and wakeup hooks allow us to account for time * that is otherwise invisible (TSC gets stopped). * - * The clock: sched_clock_cpu() is monotonic per cpu, and should be somewhat - * consistent between cpus (never more than 2 jiffies difference). + * + * Notes: + * + * The !IRQ-safetly of sched_clock() and sched_clock_cpu() comes from things + * like cpufreq interrupts that can change the base clock (TSC) multiplier + * and cause funny jumps in time -- although the filtering provided by + * sched_clock_cpu() should mitigate serious artifacts we cannot rely on it + * in general since for !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK we fully rely on + * sched_clock(). */ #include #include @@ -170,6 +206,11 @@ again: return val; } +/* + * Similar to cpu_clock(), but requires local IRQs to be disabled. + * + * See cpu_clock(). + */ u64 sched_clock_cpu(int cpu) { struct sched_clock_data *scd; @@ -237,9 +278,19 @@ void sched_clock_idle_wakeup_event(u64 delta_ns) } EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event); -unsigned long long cpu_clock(int cpu) +/* + * As outlined at the top, provides a fast, high resolution, nanosecond + * time source that is monotonic per cpu argument and has bounded drift + * between cpus. + * + * ######################### BIG FAT WARNING ########################## + * # when comparing cpu_clock(i) to cpu_clock(j) for i != j, time can # + * # go backwards !! # + * #################################################################### + */ +u64 cpu_clock(int cpu) { - unsigned long long clock; + u64 clock; unsigned long flags; local_irq_save(flags); @@ -249,6 +300,25 @@ unsigned long long cpu_clock(int cpu) return clock; } +/* + * Similar to cpu_clock() for the current cpu. Time will only be observed + * to be monotonic if care is taken to only compare timestampt taken on the + * same CPU. + * + * See cpu_clock(). + */ +u64 local_clock(void) +{ + u64 clock; + unsigned long flags; + + local_irq_save(flags); + clock = sched_clock_cpu(smp_processor_id()); + local_irq_restore(flags); + + return clock; +} + #else /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */ void sched_clock_init(void) @@ -264,12 +334,17 @@ u64 sched_clock_cpu(int cpu) return sched_clock(); } - -unsigned long long cpu_clock(int cpu) +u64 cpu_clock(int cpu) { return sched_clock_cpu(cpu); } +u64 local_clock(void) +{ + return sched_clock_cpu(0); +} + #endif /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */ EXPORT_SYMBOL_GPL(cpu_clock); +EXPORT_SYMBOL_GPL(local_clock); diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c index 9d589d8dcd1a..1723e2b8c589 100644 --- a/kernel/trace/trace_clock.c +++ b/kernel/trace/trace_clock.c @@ -56,7 +56,7 @@ u64 notrace trace_clock_local(void) */ u64 notrace trace_clock(void) { - return cpu_clock(raw_smp_processor_id()); + return local_clock(); } -- cgit v1.2.2 From 246d86b51845063e4b06b27579990492dc5fa317 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 19 May 2010 14:57:11 +0200 Subject: sched: Simplify the reacquire_kernel_lock() logic - Contrary to what 6d558c3a says, there is no need to reload prev = rq->curr after the context switch. You always schedule back to where you came from, prev must be equal to current even if cpu/rq was changed. - This also means reacquire_kernel_lock() can use prev instead of current. - No need to reassign switch_count if reacquire_kernel_lock() reports need_resched(), we can just move the initial assignment down, under the "need_resched_nonpreemptible:" label. - Try to update the comment after context_switch(). Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100519125711.GA30199@redhat.com> Signed-off-by: Ingo Molnar --- kernel/sched.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 3abd8f780dae..f37a9618fac3 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -3636,7 +3636,6 @@ need_resched: rq = cpu_rq(cpu); rcu_note_context_switch(cpu); prev = rq->curr; - switch_count = &prev->nivcsw; release_kernel_lock(prev); need_resched_nonpreemptible: @@ -3649,6 +3648,7 @@ need_resched_nonpreemptible: raw_spin_lock_irq(&rq->lock); clear_tsk_need_resched(prev); + switch_count = &prev->nivcsw; if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) { if (unlikely(signal_pending_state(prev->state, prev))) { prev->state = TASK_RUNNING; @@ -3689,8 +3689,10 @@ need_resched_nonpreemptible: context_switch(rq, prev, next); /* unlocks the rq */ /* - * the context switch might have flipped the stack from under - * us, hence refresh the local variables. + * The context switch have flipped the stack from under us + * and restored the local variables which were saved when + * this task called schedule() in the past. prev == current + * is still correct, but it can be moved to another cpu/rq. */ cpu = smp_processor_id(); rq = cpu_rq(cpu); @@ -3699,11 +3701,8 @@ need_resched_nonpreemptible: post_schedule(rq); - if (unlikely(reacquire_kernel_lock(current) < 0)) { - prev = rq->curr; - switch_count = &prev->nivcsw; + if (unlikely(reacquire_kernel_lock(prev))) goto need_resched_nonpreemptible; - } preempt_enable_no_resched(); if (need_resched()) -- cgit v1.2.2 From fdf3e95d3916f18bf8703fb065499fdbc4dfe34c Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 17 May 2010 18:14:43 -0700 Subject: sched: Avoid side-effect of tickless idle on update_cpu_load tickless idle has a negative side effect on update_cpu_load(), which in turn can affect load balancing behavior. update_cpu_load() is supposed to be called every tick, to keep track of various load indicies. With tickless idle, there are no scheduler ticks called on the idle CPUs. Idle CPUs may still do load balancing (with idle_load_balance CPU) using the stale cpu_load. It will also cause problems when all CPUs go idle for a while and become active again. In this case loads would not degrade as expected. This is how rq->nr_load_updates change looks like under different conditions: All CPUS idle for 10 seconds (HZ=1000) 0 1621 10 496 11 139 12 875 13 1672 14 12 15 21 1 1472 2 2426 3 1161 4 2108 5 1525 6 701 7 249 8 766 9 1967 One CPU busy rest idle for 10 seconds 0 10003 10 601 11 95 12 966 13 1597 14 114 15 98 1 3457 2 93 3 6679 4 1425 5 1479 6 595 7 193 8 633 9 1687 All CPUs busy for 10 seconds 0 10026 10 10026 11 10026 12 10026 13 10025 14 10025 15 10025 1 10026 2 10026 3 10026 4 10026 5 10026 6 10026 7 10026 8 10026 9 10026 That is update_cpu_load works properly only when all CPUs are busy. If all are idle, all the CPUs get way lower updates. And when few CPUs are busy and rest are idle, only busy and ilb CPU does proper updates and rest of the idle CPUs will do lower updates. The patch keeps track of when a last update was done and fixes up the load avg based on current time. On one of my test system SPECjbb with warehouse 1..numcpus, patch improves throughput numbers by ~1% (average of 6 runs). On another test system (with different domain hierarchy) there is no noticable change in perf. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Peter Zijlstra Cc: Thomas Gleixner LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/sched.c | 100 +++++++++++++++++++++++++++++++++++++++++++++++++--- kernel/sched_fair.c | 5 ++- 2 files changed, 99 insertions(+), 6 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index f37a9618fac3..a757f6b11cbd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -457,6 +457,7 @@ struct rq { unsigned long nr_running; #define CPU_LOAD_IDX_MAX 5 unsigned long cpu_load[CPU_LOAD_IDX_MAX]; + unsigned long last_load_update_tick; #ifdef CONFIG_NO_HZ u64 nohz_stamp; unsigned char in_nohz_recently; @@ -1803,6 +1804,7 @@ static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) static void calc_load_account_idle(struct rq *this_rq); static void update_sysctl(void); static int get_update_sysctl_factor(void); +static void update_cpu_load(struct rq *this_rq); static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu) { @@ -3049,24 +3051,103 @@ static void calc_load_account_active(struct rq *this_rq) this_rq->calc_load_update += LOAD_FREQ; } +/* + * The exact cpuload at various idx values, calculated at every tick would be + * load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load + * + * If a cpu misses updates for n-1 ticks (as it was idle) and update gets called + * on nth tick when cpu may be busy, then we have: + * load = ((2^idx - 1) / 2^idx)^(n-1) * load + * load = (2^idx - 1) / 2^idx) * load + 1 / 2^idx * cur_load + * + * decay_load_missed() below does efficient calculation of + * load = ((2^idx - 1) / 2^idx)^(n-1) * load + * avoiding 0..n-1 loop doing load = ((2^idx - 1) / 2^idx) * load + * + * The calculation is approximated on a 128 point scale. + * degrade_zero_ticks is the number of ticks after which load at any + * particular idx is approximated to be zero. + * degrade_factor is a precomputed table, a row for each load idx. + * Each column corresponds to degradation factor for a power of two ticks, + * based on 128 point scale. + * Example: + * row 2, col 3 (=12) says that the degradation at load idx 2 after + * 8 ticks is 12/128 (which is an approximation of exact factor 3^8/4^8). + * + * With this power of 2 load factors, we can degrade the load n times + * by looking at 1 bits in n and doing as many mult/shift instead of + * n mult/shifts needed by the exact degradation. + */ +#define DEGRADE_SHIFT 7 +static const unsigned char + degrade_zero_ticks[CPU_LOAD_IDX_MAX] = {0, 8, 32, 64, 128}; +static const unsigned char + degrade_factor[CPU_LOAD_IDX_MAX][DEGRADE_SHIFT + 1] = { + {0, 0, 0, 0, 0, 0, 0, 0}, + {64, 32, 8, 0, 0, 0, 0, 0}, + {96, 72, 40, 12, 1, 0, 0}, + {112, 98, 75, 43, 15, 1, 0}, + {120, 112, 98, 76, 45, 16, 2} }; + +/* + * Update cpu_load for any missed ticks, due to tickless idle. The backlog + * would be when CPU is idle and so we just decay the old load without + * adding any new load. + */ +static unsigned long +decay_load_missed(unsigned long load, unsigned long missed_updates, int idx) +{ + int j = 0; + + if (!missed_updates) + return load; + + if (missed_updates >= degrade_zero_ticks[idx]) + return 0; + + if (idx == 1) + return load >> missed_updates; + + while (missed_updates) { + if (missed_updates % 2) + load = (load * degrade_factor[idx][j]) >> DEGRADE_SHIFT; + + missed_updates >>= 1; + j++; + } + return load; +} + /* * Update rq->cpu_load[] statistics. This function is usually called every - * scheduler tick (TICK_NSEC). + * scheduler tick (TICK_NSEC). With tickless idle this will not be called + * every tick. We fix it up based on jiffies. */ static void update_cpu_load(struct rq *this_rq) { unsigned long this_load = this_rq->load.weight; + unsigned long curr_jiffies = jiffies; + unsigned long pending_updates; int i, scale; this_rq->nr_load_updates++; + /* Avoid repeated calls on same jiffy, when moving in and out of idle */ + if (curr_jiffies == this_rq->last_load_update_tick) + return; + + pending_updates = curr_jiffies - this_rq->last_load_update_tick; + this_rq->last_load_update_tick = curr_jiffies; + /* Update our load: */ - for (i = 0, scale = 1; i < CPU_LOAD_IDX_MAX; i++, scale += scale) { + this_rq->cpu_load[0] = this_load; /* Fasttrack for idx 0 */ + for (i = 1, scale = 2; i < CPU_LOAD_IDX_MAX; i++, scale += scale) { unsigned long old_load, new_load; /* scale is effectively 1 << i now, and >> i divides by scale */ old_load = this_rq->cpu_load[i]; + old_load = decay_load_missed(old_load, pending_updates - 1, i); new_load = this_load; /* * Round up the averaging division if load is increasing. This @@ -3074,9 +3155,15 @@ static void update_cpu_load(struct rq *this_rq) * example. */ if (new_load > old_load) - new_load += scale-1; - this_rq->cpu_load[i] = (old_load*(scale-1) + new_load) >> i; + new_load += scale - 1; + + this_rq->cpu_load[i] = (old_load * (scale - 1) + new_load) >> i; } +} + +static void update_cpu_load_active(struct rq *this_rq) +{ + update_cpu_load(this_rq); calc_load_account_active(this_rq); } @@ -3464,7 +3551,7 @@ void scheduler_tick(void) raw_spin_lock(&rq->lock); update_rq_clock(rq); - update_cpu_load(rq); + update_cpu_load_active(rq); curr->sched_class->task_tick(rq, curr, 0); raw_spin_unlock(&rq->lock); @@ -7688,6 +7775,9 @@ void __init sched_init(void) for (j = 0; j < CPU_LOAD_IDX_MAX; j++) rq->cpu_load[j] = 0; + + rq->last_load_update_tick = jiffies; + #ifdef CONFIG_SMP rq->sd = NULL; rq->rd = NULL; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index eed35eded602..22b8b4f2b616 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -3420,9 +3420,12 @@ static void run_rebalance_domains(struct softirq_action *h) if (need_resched()) break; + rq = cpu_rq(balance_cpu); + raw_spin_lock_irq(&rq->lock); + update_cpu_load(rq); + raw_spin_unlock_irq(&rq->lock); rebalance_domains(balance_cpu, CPU_IDLE); - rq = cpu_rq(balance_cpu); if (time_after(this_rq->next_balance, rq->next_balance)) this_rq->next_balance = rq->next_balance; } -- cgit v1.2.2 From 83cd4fe27ad8446619b2e030b171b858501de87d Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Fri, 21 May 2010 17:09:41 -0700 Subject: sched: Change nohz idle load balancing logic to push model In the new push model, all idle CPUs indeed go into nohz mode. There is still the concept of idle load balancer (performing the load balancing on behalf of all the idle cpu's in the system). Busy CPU kicks the nohz balancer when any of the nohz CPUs need idle load balancing. The kickee CPU does the idle load balancing on behalf of all idle CPUs instead of the normal idle balance. This addresses the below two problems with the current nohz ilb logic: * the idle load balancer continued to have periodic ticks during idle and wokeup frequently, even though it did not have any rebalancing to do on behalf of any of the idle CPUs. * On x86 and CPUs that have APIC timer stoppage on idle CPUs, this periodic wakeup can result in a periodic additional interrupt on a CPU doing the timer broadcast. Also currently we are migrating the unpinned timers from an idle to the cpu doing idle load balancing (when all the cpus in the system are idle, there is no idle load balancing cpu and timers get added to the same idle cpu where the request was made. So the existing optimization works only on semi idle system). And In semi idle system, we no longer have periodic ticks on the idle load balancer CPU. Using that cpu will add more delays to the timers than intended (as that cpu's timer base may not be uptodate wrt jiffies etc). This was causing mysterious slowdowns during boot etc. For now, in the semi idle case, use the nearest busy cpu for migrating timers from an idle cpu. This is good for power-savings anyway. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Signed-off-by: Peter Zijlstra Cc: Thomas Gleixner LKML-Reference: <1274486981.2840.46.camel@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 9 +- kernel/hrtimer.c | 8 +- kernel/sched.c | 34 ++++- kernel/sched_fair.c | 329 ++++++++++++++++++++++++++++------------------- kernel/time/tick-sched.c | 8 +- kernel/timer.c | 8 +- 6 files changed, 237 insertions(+), 159 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index c2d4316a04bb..a3e5b1cd0438 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -271,14 +271,11 @@ extern int runqueue_is_locked(int cpu); extern cpumask_var_t nohz_cpu_mask; #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ) -extern int select_nohz_load_balancer(int cpu); -extern int get_nohz_load_balancer(void); +extern void select_nohz_load_balancer(int stop_tick); +extern int get_nohz_timer_target(void); extern int nohz_ratelimit(int cpu); #else -static inline int select_nohz_load_balancer(int cpu) -{ - return 0; -} +static inline void select_nohz_load_balancer(int stop_tick) { } static inline int nohz_ratelimit(int cpu) { diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 5c69e996bd0f..e934339fbbef 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -144,12 +144,8 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer, static int hrtimer_get_target(int this_cpu, int pinned) { #ifdef CONFIG_NO_HZ - if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) { - int preferred_cpu = get_nohz_load_balancer(); - - if (preferred_cpu >= 0) - return preferred_cpu; - } + if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) + return get_nohz_timer_target(); #endif return this_cpu; } diff --git a/kernel/sched.c b/kernel/sched.c index a757f6b11cbd..132950b33dde 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -460,7 +460,7 @@ struct rq { unsigned long last_load_update_tick; #ifdef CONFIG_NO_HZ u64 nohz_stamp; - unsigned char in_nohz_recently; + unsigned char nohz_balance_kick; #endif unsigned int skip_clock_update; @@ -1194,6 +1194,27 @@ static void resched_cpu(int cpu) } #ifdef CONFIG_NO_HZ +/* + * In the semi idle case, use the nearest busy cpu for migrating timers + * from an idle cpu. This is good for power-savings. + * + * We don't do similar optimization for completely idle system, as + * selecting an idle cpu will add more delays to the timers than intended + * (as that cpu's timer base may not be uptodate wrt jiffies etc). + */ +int get_nohz_timer_target(void) +{ + int cpu = smp_processor_id(); + int i; + struct sched_domain *sd; + + for_each_domain(cpu, sd) { + for_each_cpu(i, sched_domain_span(sd)) + if (!idle_cpu(i)) + return i; + } + return cpu; +} /* * When add_timer_on() enqueues a timer into the timer wheel of an * idle CPU then this timer might expire before the next timer event @@ -7791,6 +7812,10 @@ void __init sched_init(void) rq->idle_stamp = 0; rq->avg_idle = 2*sysctl_sched_migration_cost; rq_attach_root(rq, &def_root_domain); +#ifdef CONFIG_NO_HZ + rq->nohz_balance_kick = 0; + init_sched_softirq_csd(&per_cpu(remote_sched_softirq_cb, i)); +#endif #endif init_rq_hrtick(rq); atomic_set(&rq->nr_iowait, 0); @@ -7835,8 +7860,11 @@ void __init sched_init(void) zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT); #ifdef CONFIG_SMP #ifdef CONFIG_NO_HZ - zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT); - alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT); + zalloc_cpumask_var(&nohz.idle_cpus_mask, GFP_NOWAIT); + alloc_cpumask_var(&nohz.grp_idle_mask, GFP_NOWAIT); + atomic_set(&nohz.load_balancer, nr_cpu_ids); + atomic_set(&nohz.first_pick_cpu, nr_cpu_ids); + atomic_set(&nohz.second_pick_cpu, nr_cpu_ids); #endif /* May be allocated at isolcpus cmdline parse time */ if (cpu_isolated_map == NULL) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 22b8b4f2b616..6ee2e0af665b 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -3091,13 +3091,40 @@ out_unlock: } #ifdef CONFIG_NO_HZ + +static DEFINE_PER_CPU(struct call_single_data, remote_sched_softirq_cb); + +static void trigger_sched_softirq(void *data) +{ + raise_softirq_irqoff(SCHED_SOFTIRQ); +} + +static inline void init_sched_softirq_csd(struct call_single_data *csd) +{ + csd->func = trigger_sched_softirq; + csd->info = NULL; + csd->flags = 0; + csd->priv = 0; +} + +/* + * idle load balancing details + * - One of the idle CPUs nominates itself as idle load_balancer, while + * entering idle. + * - This idle load balancer CPU will also go into tickless mode when + * it is idle, just like all other idle CPUs + * - When one of the busy CPUs notice that there may be an idle rebalancing + * needed, they will kick the idle load balancer, which then does idle + * load balancing for all the idle CPUs. + */ static struct { atomic_t load_balancer; - cpumask_var_t cpu_mask; - cpumask_var_t ilb_grp_nohz_mask; -} nohz ____cacheline_aligned = { - .load_balancer = ATOMIC_INIT(-1), -}; + atomic_t first_pick_cpu; + atomic_t second_pick_cpu; + cpumask_var_t idle_cpus_mask; + cpumask_var_t grp_idle_mask; + unsigned long next_balance; /* in jiffy units */ +} nohz ____cacheline_aligned; int get_nohz_load_balancer(void) { @@ -3151,17 +3178,17 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag) */ static inline int is_semi_idle_group(struct sched_group *ilb_group) { - cpumask_and(nohz.ilb_grp_nohz_mask, nohz.cpu_mask, + cpumask_and(nohz.grp_idle_mask, nohz.idle_cpus_mask, sched_group_cpus(ilb_group)); /* * A sched_group is semi-idle when it has atleast one busy cpu * and atleast one idle cpu. */ - if (cpumask_empty(nohz.ilb_grp_nohz_mask)) + if (cpumask_empty(nohz.grp_idle_mask)) return 0; - if (cpumask_equal(nohz.ilb_grp_nohz_mask, sched_group_cpus(ilb_group))) + if (cpumask_equal(nohz.grp_idle_mask, sched_group_cpus(ilb_group))) return 0; return 1; @@ -3194,7 +3221,7 @@ static int find_new_ilb(int cpu) * Optimize for the case when we have no idle CPUs or only one * idle CPU. Don't walk the sched_domain hierarchy in such cases */ - if (cpumask_weight(nohz.cpu_mask) < 2) + if (cpumask_weight(nohz.idle_cpus_mask) < 2) goto out_done; for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) { @@ -3202,7 +3229,7 @@ static int find_new_ilb(int cpu) do { if (is_semi_idle_group(ilb_group)) - return cpumask_first(nohz.ilb_grp_nohz_mask); + return cpumask_first(nohz.grp_idle_mask); ilb_group = ilb_group->next; @@ -3210,98 +3237,116 @@ static int find_new_ilb(int cpu) } out_done: - return cpumask_first(nohz.cpu_mask); + return nr_cpu_ids; } #else /* (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */ static inline int find_new_ilb(int call_cpu) { - return cpumask_first(nohz.cpu_mask); + return nr_cpu_ids; } #endif +/* + * Kick a CPU to do the nohz balancing, if it is time for it. We pick the + * nohz_load_balancer CPU (if there is one) otherwise fallback to any idle + * CPU (if there is one). + */ +static void nohz_balancer_kick(int cpu) +{ + int ilb_cpu; + + nohz.next_balance++; + + ilb_cpu = get_nohz_load_balancer(); + + if (ilb_cpu >= nr_cpu_ids) { + ilb_cpu = cpumask_first(nohz.idle_cpus_mask); + if (ilb_cpu >= nr_cpu_ids) + return; + } + + if (!cpu_rq(ilb_cpu)->nohz_balance_kick) { + struct call_single_data *cp; + + cpu_rq(ilb_cpu)->nohz_balance_kick = 1; + cp = &per_cpu(remote_sched_softirq_cb, cpu); + __smp_call_function_single(ilb_cpu, cp, 0); + } + return; +} + /* * This routine will try to nominate the ilb (idle load balancing) * owner among the cpus whose ticks are stopped. ilb owner will do the idle - * load balancing on behalf of all those cpus. If all the cpus in the system - * go into this tickless mode, then there will be no ilb owner (as there is - * no need for one) and all the cpus will sleep till the next wakeup event - * arrives... - * - * For the ilb owner, tick is not stopped. And this tick will be used - * for idle load balancing. ilb owner will still be part of - * nohz.cpu_mask.. + * load balancing on behalf of all those cpus. * - * While stopping the tick, this cpu will become the ilb owner if there - * is no other owner. And will be the owner till that cpu becomes busy - * or if all cpus in the system stop their ticks at which point - * there is no need for ilb owner. + * When the ilb owner becomes busy, we will not have new ilb owner until some + * idle CPU wakes up and goes back to idle or some busy CPU tries to kick + * idle load balancing by kicking one of the idle CPUs. * - * When the ilb owner becomes busy, it nominates another owner, during the - * next busy scheduler_tick() + * Ticks are stopped for the ilb owner as well, with busy CPU kicking this + * ilb owner CPU in future (when there is a need for idle load balancing on + * behalf of all idle CPUs). */ -int select_nohz_load_balancer(int stop_tick) +void select_nohz_load_balancer(int stop_tick) { int cpu = smp_processor_id(); if (stop_tick) { - cpu_rq(cpu)->in_nohz_recently = 1; - if (!cpu_active(cpu)) { if (atomic_read(&nohz.load_balancer) != cpu) - return 0; + return; /* * If we are going offline and still the leader, * give up! */ - if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu) + if (atomic_cmpxchg(&nohz.load_balancer, cpu, + nr_cpu_ids) != cpu) BUG(); - return 0; + return; } - cpumask_set_cpu(cpu, nohz.cpu_mask); + cpumask_set_cpu(cpu, nohz.idle_cpus_mask); - /* time for ilb owner also to sleep */ - if (cpumask_weight(nohz.cpu_mask) == num_active_cpus()) { - if (atomic_read(&nohz.load_balancer) == cpu) - atomic_set(&nohz.load_balancer, -1); - return 0; - } + if (atomic_read(&nohz.first_pick_cpu) == cpu) + atomic_cmpxchg(&nohz.first_pick_cpu, cpu, nr_cpu_ids); + if (atomic_read(&nohz.second_pick_cpu) == cpu) + atomic_cmpxchg(&nohz.second_pick_cpu, cpu, nr_cpu_ids); - if (atomic_read(&nohz.load_balancer) == -1) { - /* make me the ilb owner */ - if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1) - return 1; - } else if (atomic_read(&nohz.load_balancer) == cpu) { + if (atomic_read(&nohz.load_balancer) >= nr_cpu_ids) { int new_ilb; - if (!(sched_smt_power_savings || - sched_mc_power_savings)) - return 1; + /* make me the ilb owner */ + if (atomic_cmpxchg(&nohz.load_balancer, nr_cpu_ids, + cpu) != nr_cpu_ids) + return; + /* * Check to see if there is a more power-efficient * ilb. */ new_ilb = find_new_ilb(cpu); if (new_ilb < nr_cpu_ids && new_ilb != cpu) { - atomic_set(&nohz.load_balancer, -1); + atomic_set(&nohz.load_balancer, nr_cpu_ids); resched_cpu(new_ilb); - return 0; + return; } - return 1; + return; } } else { - if (!cpumask_test_cpu(cpu, nohz.cpu_mask)) - return 0; + if (!cpumask_test_cpu(cpu, nohz.idle_cpus_mask)) + return; - cpumask_clear_cpu(cpu, nohz.cpu_mask); + cpumask_clear_cpu(cpu, nohz.idle_cpus_mask); if (atomic_read(&nohz.load_balancer) == cpu) - if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu) + if (atomic_cmpxchg(&nohz.load_balancer, cpu, + nr_cpu_ids) != cpu) BUG(); } - return 0; + return; } #endif @@ -3383,11 +3428,101 @@ out: rq->next_balance = next_balance; } +#ifdef CONFIG_NO_HZ /* - * run_rebalance_domains is triggered when needed from the scheduler tick. - * In CONFIG_NO_HZ case, the idle load balance owner will do the + * In CONFIG_NO_HZ case, the idle balance kickee will do the * rebalancing for all the cpus for whom scheduler ticks are stopped. */ +static void nohz_idle_balance(int this_cpu, enum cpu_idle_type idle) +{ + struct rq *this_rq = cpu_rq(this_cpu); + struct rq *rq; + int balance_cpu; + + if (idle != CPU_IDLE || !this_rq->nohz_balance_kick) + return; + + for_each_cpu(balance_cpu, nohz.idle_cpus_mask) { + if (balance_cpu == this_cpu) + continue; + + /* + * If this cpu gets work to do, stop the load balancing + * work being done for other cpus. Next load + * balancing owner will pick it up. + */ + if (need_resched()) { + this_rq->nohz_balance_kick = 0; + break; + } + + raw_spin_lock_irq(&this_rq->lock); + update_cpu_load(this_rq); + raw_spin_unlock_irq(&this_rq->lock); + + rebalance_domains(balance_cpu, CPU_IDLE); + + rq = cpu_rq(balance_cpu); + if (time_after(this_rq->next_balance, rq->next_balance)) + this_rq->next_balance = rq->next_balance; + } + nohz.next_balance = this_rq->next_balance; + this_rq->nohz_balance_kick = 0; +} + +/* + * Current heuristic for kicking the idle load balancer + * - first_pick_cpu is the one of the busy CPUs. It will kick + * idle load balancer when it has more than one process active. This + * eliminates the need for idle load balancing altogether when we have + * only one running process in the system (common case). + * - If there are more than one busy CPU, idle load balancer may have + * to run for active_load_balance to happen (i.e., two busy CPUs are + * SMT or core siblings and can run better if they move to different + * physical CPUs). So, second_pick_cpu is the second of the busy CPUs + * which will kick idle load balancer as soon as it has any load. + */ +static inline int nohz_kick_needed(struct rq *rq, int cpu) +{ + unsigned long now = jiffies; + int ret; + int first_pick_cpu, second_pick_cpu; + + if (time_before(now, nohz.next_balance)) + return 0; + + if (!rq->nr_running) + return 0; + + first_pick_cpu = atomic_read(&nohz.first_pick_cpu); + second_pick_cpu = atomic_read(&nohz.second_pick_cpu); + + if (first_pick_cpu < nr_cpu_ids && first_pick_cpu != cpu && + second_pick_cpu < nr_cpu_ids && second_pick_cpu != cpu) + return 0; + + ret = atomic_cmpxchg(&nohz.first_pick_cpu, nr_cpu_ids, cpu); + if (ret == nr_cpu_ids || ret == cpu) { + atomic_cmpxchg(&nohz.second_pick_cpu, cpu, nr_cpu_ids); + if (rq->nr_running > 1) + return 1; + } else { + ret = atomic_cmpxchg(&nohz.second_pick_cpu, nr_cpu_ids, cpu); + if (ret == nr_cpu_ids || ret == cpu) { + if (rq->nr_running) + return 1; + } + } + return 0; +} +#else +static void nohz_idle_balance(int this_cpu, enum cpu_idle_type idle) { } +#endif + +/* + * run_rebalance_domains is triggered when needed from the scheduler tick. + * Also triggered for nohz idle balancing (with nohz_balancing_kick set). + */ static void run_rebalance_domains(struct softirq_action *h) { int this_cpu = smp_processor_id(); @@ -3397,40 +3532,12 @@ static void run_rebalance_domains(struct softirq_action *h) rebalance_domains(this_cpu, idle); -#ifdef CONFIG_NO_HZ /* - * If this cpu is the owner for idle load balancing, then do the + * If this cpu has a pending nohz_balance_kick, then do the * balancing on behalf of the other idle cpus whose ticks are * stopped. */ - if (this_rq->idle_at_tick && - atomic_read(&nohz.load_balancer) == this_cpu) { - struct rq *rq; - int balance_cpu; - - for_each_cpu(balance_cpu, nohz.cpu_mask) { - if (balance_cpu == this_cpu) - continue; - - /* - * If this cpu gets work to do, stop the load balancing - * work being done for other cpus. Next load - * balancing owner will pick it up. - */ - if (need_resched()) - break; - - rq = cpu_rq(balance_cpu); - raw_spin_lock_irq(&rq->lock); - update_cpu_load(rq); - raw_spin_unlock_irq(&rq->lock); - rebalance_domains(balance_cpu, CPU_IDLE); - - if (time_after(this_rq->next_balance, rq->next_balance)) - this_rq->next_balance = rq->next_balance; - } - } -#endif + nohz_idle_balance(this_cpu, idle); } static inline int on_null_domain(int cpu) @@ -3440,57 +3547,17 @@ static inline int on_null_domain(int cpu) /* * Trigger the SCHED_SOFTIRQ if it is time to do periodic load balancing. - * - * In case of CONFIG_NO_HZ, this is the place where we nominate a new - * idle load balancing owner or decide to stop the periodic load balancing, - * if the whole system is idle. */ static inline void trigger_load_balance(struct rq *rq, int cpu) { -#ifdef CONFIG_NO_HZ - /* - * If we were in the nohz mode recently and busy at the current - * scheduler tick, then check if we need to nominate new idle - * load balancer. - */ - if (rq->in_nohz_recently && !rq->idle_at_tick) { - rq->in_nohz_recently = 0; - - if (atomic_read(&nohz.load_balancer) == cpu) { - cpumask_clear_cpu(cpu, nohz.cpu_mask); - atomic_set(&nohz.load_balancer, -1); - } - - if (atomic_read(&nohz.load_balancer) == -1) { - int ilb = find_new_ilb(cpu); - - if (ilb < nr_cpu_ids) - resched_cpu(ilb); - } - } - - /* - * If this cpu is idle and doing idle load balancing for all the - * cpus with ticks stopped, is it time for that to stop? - */ - if (rq->idle_at_tick && atomic_read(&nohz.load_balancer) == cpu && - cpumask_weight(nohz.cpu_mask) == num_online_cpus()) { - resched_cpu(cpu); - return; - } - - /* - * If this cpu is idle and the idle load balancing is done by - * someone else, then no need raise the SCHED_SOFTIRQ - */ - if (rq->idle_at_tick && atomic_read(&nohz.load_balancer) != cpu && - cpumask_test_cpu(cpu, nohz.cpu_mask)) - return; -#endif /* Don't need to rebalance while attached to NULL domain */ if (time_after_eq(jiffies, rq->next_balance) && likely(!on_null_domain(cpu))) raise_softirq(SCHED_SOFTIRQ); +#ifdef CONFIG_NO_HZ + else if (nohz_kick_needed(rq, cpu) && likely(!on_null_domain(cpu))) + nohz_balancer_kick(cpu); +#endif } static void rq_online_fair(struct rq *rq) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 1d7b9bc1c034..5f171f04ab00 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -408,13 +408,7 @@ void tick_nohz_stop_sched_tick(int inidle) * the scheduler tick in nohz_restart_sched_tick. */ if (!ts->tick_stopped) { - if (select_nohz_load_balancer(1)) { - /* - * sched tick not stopped! - */ - cpumask_clear_cpu(cpu, nohz_cpu_mask); - goto out; - } + select_nohz_load_balancer(1); ts->idle_tick = hrtimer_get_expires(&ts->sched_timer); ts->tick_stopped = 1; diff --git a/kernel/timer.c b/kernel/timer.c index ee305c8d4e18..48d6aec0789c 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -679,12 +679,8 @@ __mod_timer(struct timer_list *timer, unsigned long expires, cpu = smp_processor_id(); #if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP) - if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) { - int preferred_cpu = get_nohz_load_balancer(); - - if (preferred_cpu >= 0) - cpu = preferred_cpu; - } + if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) + cpu = get_nohz_timer_target(); #endif new_base = per_cpu(tvec_bases, cpu); -- cgit v1.2.2 From 9d5efe05eb0c904545a28b19c18b949f23334de0 Mon Sep 17 00:00:00 2001 From: Srivatsa Vaddagiri Date: Tue, 8 Jun 2010 14:57:02 +1000 Subject: sched: Fix capacity calculations for SMT4 Handle cpu capacity being reported as 0 on cores with more number of hardware threads. For example on a Power7 core with 4 hardware threads, core power is 1177 and thus power of each hardware thread is 1177/4 = 294. This low power can lead to capacity for each hardware thread being calculated as 0, which leads to tasks bouncing within the core madly! Fix this by reporting capacity for hardware threads as 1, provided their power is not scaled down significantly because of frequency scaling or real-time tasks usage of cpu. Signed-off-by: Srivatsa Vaddagiri Signed-off-by: Michael Neuling Signed-off-by: Peter Zijlstra Cc: Arjan van de Ven LKML-Reference: <20100608045702.21D03CC895@localhost.localdomain> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 +- kernel/sched_fair.c | 53 +++++++++++++++++++++++++++++++++++++++++---------- 2 files changed, 44 insertions(+), 11 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index a3e5b1cd0438..c731296e5e93 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -857,7 +857,7 @@ struct sched_group { * CPU power of this group, SCHED_LOAD_SCALE being max power for a * single CPU. */ - unsigned int cpu_power; + unsigned int cpu_power, cpu_power_orig; /* * The CPUs this group covers. diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 6ee2e0af665b..b9b3462483b7 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2285,13 +2285,6 @@ static void update_cpu_power(struct sched_domain *sd, int cpu) unsigned long power = SCHED_LOAD_SCALE; struct sched_group *sdg = sd->groups; - if (sched_feat(ARCH_POWER)) - power *= arch_scale_freq_power(sd, cpu); - else - power *= default_scale_freq_power(sd, cpu); - - power >>= SCHED_LOAD_SHIFT; - if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) { if (sched_feat(ARCH_POWER)) power *= arch_scale_smt_power(sd, cpu); @@ -2301,6 +2294,15 @@ static void update_cpu_power(struct sched_domain *sd, int cpu) power >>= SCHED_LOAD_SHIFT; } + sdg->cpu_power_orig = power; + + if (sched_feat(ARCH_POWER)) + power *= arch_scale_freq_power(sd, cpu); + else + power *= default_scale_freq_power(sd, cpu); + + power >>= SCHED_LOAD_SHIFT; + power *= scale_rt_power(cpu); power >>= SCHED_LOAD_SHIFT; @@ -2333,6 +2335,31 @@ static void update_group_power(struct sched_domain *sd, int cpu) sdg->cpu_power = power; } +/* + * Try and fix up capacity for tiny siblings, this is needed when + * things like SD_ASYM_PACKING need f_b_g to select another sibling + * which on its own isn't powerful enough. + * + * See update_sd_pick_busiest() and check_asym_packing(). + */ +static inline int +fix_small_capacity(struct sched_domain *sd, struct sched_group *group) +{ + /* + * Only siblings can have significantly less than SCHED_LOAD_SCALE + */ + if (sd->level != SD_LV_SIBLING) + return 0; + + /* + * If ~90% of the cpu_power is still there, we're good. + */ + if (group->cpu_power * 32 < group->cpu_power_orig * 29) + return 1; + + return 0; +} + /** * update_sg_lb_stats - Update sched_group's statistics for load balancing. * @sd: The sched_domain whose statistics are to be updated. @@ -2426,6 +2453,8 @@ static inline void update_sg_lb_stats(struct sched_domain *sd, sgs->group_capacity = DIV_ROUND_CLOSEST(group->cpu_power, SCHED_LOAD_SCALE); + if (!sgs->group_capacity) + sgs->group_capacity = fix_small_capacity(sd, group); } /** @@ -2724,8 +2753,9 @@ ret: * find_busiest_queue - find the busiest runqueue among the cpus in group. */ static struct rq * -find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle, - unsigned long imbalance, const struct cpumask *cpus) +find_busiest_queue(struct sched_domain *sd, struct sched_group *group, + enum cpu_idle_type idle, unsigned long imbalance, + const struct cpumask *cpus) { struct rq *busiest = NULL, *rq; unsigned long max_load = 0; @@ -2736,6 +2766,9 @@ find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle, unsigned long capacity = DIV_ROUND_CLOSEST(power, SCHED_LOAD_SCALE); unsigned long wl; + if (!capacity) + capacity = fix_small_capacity(sd, group); + if (!cpumask_test_cpu(i, cpus)) continue; @@ -2852,7 +2885,7 @@ redo: goto out_balanced; } - busiest = find_busiest_queue(group, idle, imbalance, cpus); + busiest = find_busiest_queue(sd, group, idle, imbalance, cpus); if (!busiest) { schedstat_inc(sd, lb_nobusyq[idle]); goto out_balanced; -- cgit v1.2.2 From 532cb4c401e225b084c14d6bd6a2f8ee561de2f1 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 8 Jun 2010 14:57:02 +1000 Subject: sched: Add asymmetric group packing option for sibling domain Check to see if the group is packed in a sched doman. This is primarily intended to used at the sibling level. Some cores like POWER7 prefer to use lower numbered SMT threads. In the case of POWER7, it can move to lower SMT modes only when higher threads are idle. When in lower SMT modes, the threads will perform better since they share less core resources. Hence when we have idle threads, we want them to be the higher ones. This adds a hook into f_b_g() called check_asym_packing() to check the packing. This packing function is run on idle threads. It checks to see if the busiest CPU in this domain (core in the P7 case) has a higher CPU number than what where the packing function is being run on. If it is, calculate the imbalance and return the higher busier thread as the busiest group to f_b_g(). Here we are assuming a lower CPU number will be equivalent to a lower SMT thread number. It also creates a new SD_ASYM_PACKING flag to enable this feature at any scheduler domain level. It also creates an arch hook to enable this feature at the sibling level. The default function doesn't enable this feature. Based heavily on patch from Peter Zijlstra. Fixes from Srivatsa Vaddagiri. Signed-off-by: Michael Neuling Signed-off-by: Srivatsa Vaddagiri Signed-off-by: Peter Zijlstra Cc: Arjan van de Ven Cc: "H. Peter Anvin" Cc: Thomas Gleixner LKML-Reference: <20100608045702.2936CCC897@localhost.localdomain> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 4 +- include/linux/topology.h | 1 + kernel/sched_fair.c | 139 +++++++++++++++++++++++++++++++++++++++++------ 3 files changed, 126 insertions(+), 18 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index c731296e5e93..ff154e10752b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -801,7 +801,7 @@ enum cpu_idle_type { #define SD_POWERSAVINGS_BALANCE 0x0100 /* Balance for power savings */ #define SD_SHARE_PKG_RESOURCES 0x0200 /* Domain members share cpu pkg resources */ #define SD_SERIALIZE 0x0400 /* Only a single load balancing instance */ - +#define SD_ASYM_PACKING 0x0800 /* Place busy groups earlier in the domain */ #define SD_PREFER_SIBLING 0x1000 /* Prefer to place tasks in a sibling domain */ enum powersavings_balance_level { @@ -836,6 +836,8 @@ static inline int sd_balance_for_package_power(void) return SD_PREFER_SIBLING; } +extern int __weak arch_sd_sibiling_asym_packing(void); + /* * Optimise SD flags for power savings: * SD_BALANCE_NEWIDLE helps agressive task consolidation and power savings. diff --git a/include/linux/topology.h b/include/linux/topology.h index c44df50a05ab..cf57f30d0dcb 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -103,6 +103,7 @@ int arch_update_cpu_topology(void); | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ | 0*SD_PREFER_SIBLING \ + | arch_sd_sibiling_asym_packing() \ , \ .last_balance = jiffies, \ .balance_interval = 1, \ diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index b9b3462483b7..593424f91a8a 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2457,12 +2457,54 @@ static inline void update_sg_lb_stats(struct sched_domain *sd, sgs->group_capacity = fix_small_capacity(sd, group); } +/** + * update_sd_pick_busiest - return 1 on busiest group + * @sd: sched_domain whose statistics are to be checked + * @sds: sched_domain statistics + * @sg: sched_group candidate to be checked for being the busiest + * @sds: sched_group statistics + * + * Determine if @sg is a busier group than the previously selected + * busiest group. + */ +static bool update_sd_pick_busiest(struct sched_domain *sd, + struct sd_lb_stats *sds, + struct sched_group *sg, + struct sg_lb_stats *sgs, + int this_cpu) +{ + if (sgs->avg_load <= sds->max_load) + return false; + + if (sgs->sum_nr_running > sgs->group_capacity) + return true; + + if (sgs->group_imb) + return true; + + /* + * ASYM_PACKING needs to move all the work to the lowest + * numbered CPUs in the group, therefore mark all groups + * higher than ourself as busy. + */ + if ((sd->flags & SD_ASYM_PACKING) && sgs->sum_nr_running && + this_cpu < group_first_cpu(sg)) { + if (!sds->busiest) + return true; + + if (group_first_cpu(sds->busiest) > group_first_cpu(sg)) + return true; + } + + return false; +} + /** * update_sd_lb_stats - Update sched_group's statistics for load balancing. * @sd: sched_domain whose statistics are to be updated. * @this_cpu: Cpu for which load balance is currently performed. * @idle: Idle status of this_cpu - * @sd_idle: Idle status of the sched_domain containing group. + * @sd_idle: Idle status of the sched_domain containing sg. * @cpus: Set of cpus considered for load balancing. * @balance: Should we balance. * @sds: variable to hold the statistics for this sched_domain. @@ -2473,7 +2515,7 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu, struct sd_lb_stats *sds) { struct sched_domain *child = sd->child; - struct sched_group *group = sd->groups; + struct sched_group *sg = sd->groups; struct sg_lb_stats sgs; int load_idx, prefer_sibling = 0; @@ -2486,21 +2528,20 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu, do { int local_group; - local_group = cpumask_test_cpu(this_cpu, - sched_group_cpus(group)); + local_group = cpumask_test_cpu(this_cpu, sched_group_cpus(sg)); memset(&sgs, 0, sizeof(sgs)); - update_sg_lb_stats(sd, group, this_cpu, idle, load_idx, sd_idle, + update_sg_lb_stats(sd, sg, this_cpu, idle, load_idx, sd_idle, local_group, cpus, balance, &sgs); if (local_group && !(*balance)) return; sds->total_load += sgs.group_load; - sds->total_pwr += group->cpu_power; + sds->total_pwr += sg->cpu_power; /* * In case the child domain prefers tasks go to siblings - * first, lower the group capacity to one so that we'll try + * first, lower the sg capacity to one so that we'll try * and move all the excess tasks away. */ if (prefer_sibling) @@ -2508,23 +2549,72 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu, if (local_group) { sds->this_load = sgs.avg_load; - sds->this = group; + sds->this = sg; sds->this_nr_running = sgs.sum_nr_running; sds->this_load_per_task = sgs.sum_weighted_load; - } else if (sgs.avg_load > sds->max_load && - (sgs.sum_nr_running > sgs.group_capacity || - sgs.group_imb)) { + } else if (update_sd_pick_busiest(sd, sds, sg, &sgs, this_cpu)) { sds->max_load = sgs.avg_load; - sds->busiest = group; + sds->busiest = sg; sds->busiest_nr_running = sgs.sum_nr_running; sds->busiest_group_capacity = sgs.group_capacity; sds->busiest_load_per_task = sgs.sum_weighted_load; sds->group_imb = sgs.group_imb; } - update_sd_power_savings_stats(group, sds, local_group, &sgs); - group = group->next; - } while (group != sd->groups); + update_sd_power_savings_stats(sg, sds, local_group, &sgs); + sg = sg->next; + } while (sg != sd->groups); +} + +int __weak arch_sd_sibiling_asym_packing(void) +{ + return 0*SD_ASYM_PACKING; +} + +/** + * check_asym_packing - Check to see if the group is packed into the + * sched doman. + * + * This is primarily intended to used at the sibling level. Some + * cores like POWER7 prefer to use lower numbered SMT threads. In the + * case of POWER7, it can move to lower SMT modes only when higher + * threads are idle. When in lower SMT modes, the threads will + * perform better since they share less core resources. Hence when we + * have idle threads, we want them to be the higher ones. + * + * This packing function is run on idle threads. It checks to see if + * the busiest CPU in this domain (core in the P7 case) has a higher + * CPU number than the packing function is being run on. Here we are + * assuming lower CPU number will be equivalent to lower a SMT thread + * number. + * + * @sd: The sched_domain whose packing is to be checked. + * @sds: Statistics of the sched_domain which is to be packed + * @this_cpu: The cpu at whose sched_domain we're performing load-balance. + * @imbalance: returns amount of imbalanced due to packing. + * + * Returns 1 when packing is required and a task should be moved to + * this CPU. The amount of the imbalance is returned in *imbalance. + */ +static int check_asym_packing(struct sched_domain *sd, + struct sd_lb_stats *sds, + int this_cpu, unsigned long *imbalance) +{ + int busiest_cpu; + + if (!(sd->flags & SD_ASYM_PACKING)) + return 0; + + if (!sds->busiest) + return 0; + + busiest_cpu = group_first_cpu(sds->busiest); + if (this_cpu > busiest_cpu) + return 0; + + *imbalance = DIV_ROUND_CLOSEST(sds->max_load * sds->busiest->cpu_power, + SCHED_LOAD_SCALE); + return 1; } /** @@ -2719,6 +2809,10 @@ find_busiest_group(struct sched_domain *sd, int this_cpu, if (!(*balance)) goto ret; + if ((idle == CPU_IDLE || idle == CPU_NEWLY_IDLE) && + check_asym_packing(sd, &sds, this_cpu, imbalance)) + return sds.busiest; + if (!sds.busiest || sds.busiest_nr_running == 0) goto out_balanced; @@ -2808,9 +2902,19 @@ find_busiest_queue(struct sched_domain *sd, struct sched_group *group, /* Working cpumask for load_balance and load_balance_newidle. */ static DEFINE_PER_CPU(cpumask_var_t, load_balance_tmpmask); -static int need_active_balance(struct sched_domain *sd, int sd_idle, int idle) +static int need_active_balance(struct sched_domain *sd, int sd_idle, int idle, + int busiest_cpu, int this_cpu) { if (idle == CPU_NEWLY_IDLE) { + + /* + * ASYM_PACKING needs to force migrate tasks from busy but + * higher numbered CPUs in order to pack all tasks in the + * lowest numbered CPUs. + */ + if ((sd->flags & SD_ASYM_PACKING) && busiest_cpu > this_cpu) + return 1; + /* * The only task running in a non-idle cpu can be moved to this * cpu in an attempt to completely freeup the other CPU @@ -2929,7 +3033,8 @@ redo: schedstat_inc(sd, lb_failed[idle]); sd->nr_balance_failed++; - if (need_active_balance(sd, sd_idle, idle)) { + if (need_active_balance(sd, sd_idle, idle, cpu_of(busiest), + this_cpu)) { raw_spin_lock_irqsave(&busiest->lock, flags); /* don't kick the active_load_balance_cpu_stop, -- cgit v1.2.2 From 76cbd8a8f8b0dddbff89a6708bd5bd13c0d21a00 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 8 Jun 2010 14:57:02 +1000 Subject: powerpc: Enable asymmetric SMT scheduling on POWER7 The POWER7 core has dynamic SMT mode switching which is controlled by the hypervisor. There are 3 SMT modes: SMT1 uses thread 0 SMT2 uses threads 0 & 1 SMT4 uses threads 0, 1, 2 & 3 When in any particular SMT mode, all threads have the same performance as each other (ie. at any moment in time, all threads perform the same). The SMT mode switching works such that when linux has threads 2 & 3 idle and 0 & 1 active, it will cede (H_CEDE hypercall) threads 2 and 3 in the idle loop and the hypervisor will automatically switch to SMT2 for that core (independent of other cores). The opposite is not true, so if threads 0 & 1 are idle and 2 & 3 are active, we will stay in SMT4 mode. Similarly if thread 0 is active and threads 1, 2 & 3 are idle, we'll go into SMT1 mode. If we can get the core into a lower SMT mode (SMT1 is best), the threads will perform better (since they share less core resources). Hence when we have idle threads, we want them to be the higher ones. This adds a feature bit for asymmetric packing to powerpc and then enables it on POWER7. Signed-off-by: Michael Neuling Signed-off-by: Peter Zijlstra Acked-by: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: linuxppc-dev@ozlabs.org LKML-Reference: <20100608045702.31FB5CC8C7@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/powerpc/include/asm/cputable.h | 3 ++- arch/powerpc/kernel/process.c | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index b0b21134f61a..4b611ca1a768 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -197,6 +197,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000) #define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0040000000000000) #define CPU_FTR_UNALIGNED_LD_STD LONG_ASM_CONST(0x0080000000000000) +#define CPU_FTR_ASYM_SMT LONG_ASM_CONST(0x0100000000000000) #ifndef __ASSEMBLY__ @@ -412,7 +413,7 @@ extern const char *powerpc_base_platform; CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ - CPU_FTR_DSCR | CPU_FTR_SAO) + CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT) #define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 9d255b4f0a0e..a3f347c635b2 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1268,3 +1268,12 @@ unsigned long randomize_et_dyn(unsigned long base) return ret; } + +int arch_sd_sibiling_asym_packing(void) +{ + if (cpu_has_feature(CPU_FTR_ASYM_SMT)) { + printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n"); + return SD_ASYM_PACKING; + } + return 0; +} -- cgit v1.2.2 From 89275d59b572b92b1e2f6ddb63c49deecb801ff9 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 9 Jun 2010 16:20:55 +0200 Subject: powerpc: Exclude arch_sd_sibiling_asym_packing() on UP Only SMP systems care about load-balance features, plus this saves some .text space on UP and also fixes the build. Reported-by: Michael Ellerman Signed-off-by: Peter Zijlstra Cc: Michael Neuling LKML-Reference: Signed-off-by: Ingo Molnar --- arch/powerpc/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index a3f347c635b2..9b41ece010b6 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1269,6 +1269,7 @@ unsigned long randomize_et_dyn(unsigned long base) return ret; } +#ifdef CONFIG_SMP int arch_sd_sibiling_asym_packing(void) { if (cpu_has_feature(CPU_FTR_ASYM_SMT)) { @@ -1277,3 +1278,4 @@ int arch_sd_sibiling_asym_packing(void) } return 0; } +#endif -- cgit v1.2.2 From 694f5a1112959a6996cabdb6f8d3003e87dac8a7 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 10 Jun 2010 09:03:37 +1000 Subject: sched: Fix fix_small_capacity The CPU power test is the wrong way around in fix_small_capacity. This was due to a small changes made in the posted patch on lkml to what was was taken upstream. This patch fixes asymmetric packing for POWER7. Signed-off-by: Michael Neuling Signed-off-by: Peter Zijlstra LKML-Reference: <12629.1276124617@neuling.org> Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 593424f91a8a..e82c5722dbe3 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2354,7 +2354,7 @@ fix_small_capacity(struct sched_domain *sd, struct sched_group *group) /* * If ~90% of the cpu_power is still there, we're good. */ - if (group->cpu_power * 32 < group->cpu_power_orig * 29) + if (group->cpu_power * 32 > group->cpu_power_orig * 29) return 1; return 0; -- cgit v1.2.2 From b6b12294405e6ec029e627c49adf3193829a2685 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 10 Jun 2010 12:06:21 +1000 Subject: sched: Fix comments to make them DocBook happy Docbook fails in sched_fair.c due to comments added in the asymmetric packing patch series. This fixes these errors. No code changes. Signed-off-by: Michael Neuling Signed-off-by: Peter Zijlstra LKML-Reference: <24737.1276135581@neuling.org> Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index e82c5722dbe3..5e8f98c103fb 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2462,7 +2462,8 @@ static inline void update_sg_lb_stats(struct sched_domain *sd, * @sd: sched_domain whose statistics are to be checked * @sds: sched_domain statistics * @sg: sched_group candidate to be checked for being the busiest - * @sds: sched_group statistics + * @sgs: sched_group statistics + * @this_cpu: the current cpu * * Determine if @sg is a busier group than the previously selected * busiest group. @@ -2588,13 +2589,13 @@ int __weak arch_sd_sibiling_asym_packing(void) * assuming lower CPU number will be equivalent to lower a SMT thread * number. * + * Returns 1 when packing is required and a task should be moved to + * this CPU. The amount of the imbalance is returned in *imbalance. + * * @sd: The sched_domain whose packing is to be checked. * @sds: Statistics of the sched_domain which is to be packed * @this_cpu: The cpu at whose sched_domain we're performing load-balance. * @imbalance: returns amount of imbalanced due to packing. - * - * Returns 1 when packing is required and a task should be moved to - * this CPU. The amount of the imbalance is returned in *imbalance. */ static int check_asym_packing(struct sched_domain *sd, struct sd_lb_stats *sds, -- cgit v1.2.2 From a44702e8858a071aa0f2365113ea4a2e51c8b575 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 11 Jun 2010 01:09:44 +0200 Subject: sched: __sched_setscheduler: Read the RLIMIT_RTPRIO value lockless __sched_setscheduler() takes lock_task_sighand() to access task->signal. This is not needed since ea6d290c, ->signal can't go away. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100610230944.GA25903@redhat.com> Signed-off-by: Ingo Molnar --- kernel/sched.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 132950b33dde..b4427cc70acd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4600,12 +4600,8 @@ recheck: */ if (user && !capable(CAP_SYS_NICE)) { if (rt_policy(policy)) { - unsigned long rlim_rtprio; - - if (!lock_task_sighand(p, &flags)) - return -ESRCH; - rlim_rtprio = task_rlimit(p, RLIMIT_RTPRIO); - unlock_task_sighand(p, &flags); + unsigned long rlim_rtprio = + task_rlimit(p, RLIMIT_RTPRIO); /* can't set/change the rt policy */ if (policy != p->policy && !rlim_rtprio) -- cgit v1.2.2 From c32b4fce799d3a6157df9048d03e429956c58818 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 11 Jun 2010 01:09:48 +0200 Subject: sched: task_tick_rt: Remove the obsolete ->signal != NULL check Remove the obsolete ->signal != NULL check in watchdog(). Since ea6d290c ->signal can't be NULL. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100610230948.GA25911@redhat.com> Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 8afb953e31c6..d10c80ebb67a 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -1663,9 +1663,6 @@ static void watchdog(struct rq *rq, struct task_struct *p) { unsigned long soft, hard; - if (!p->signal) - return; - /* max may change after cur was read, this will be fixed next tick */ soft = task_rlimit(p, RLIMIT_RTTIME); hard = task_rlimit_max(p, RLIMIT_RTTIME); -- cgit v1.2.2 From 48286d5088a3ba76de40a6b70221632a49cab7a1 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 11 Jun 2010 01:09:52 +0200 Subject: sched: Remove the obsolete exit_state/signal hacks account_group_xxx() functions check ->exit_state to ensure that current->signal is valid and can't go away. This is not needed since ea6d290c, task->signal is pinned to task_struct. The comment and another hack in account_group_exec_runtime() refers to task_rq_unlock_wait() which was already removed by b7b8ff63. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100610230952.GA25914@redhat.com> Signed-off-by: Ingo Molnar --- kernel/sched_stats.h | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index 32d2bd4061b0..25c2f962f6fc 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -295,13 +295,7 @@ sched_info_switch(struct task_struct *prev, struct task_struct *next) static inline void account_group_user_time(struct task_struct *tsk, cputime_t cputime) { - struct thread_group_cputimer *cputimer; - - /* tsk == current, ensure it is safe to use ->signal */ - if (unlikely(tsk->exit_state)) - return; - - cputimer = &tsk->signal->cputimer; + struct thread_group_cputimer *cputimer = &tsk->signal->cputimer; if (!cputimer->running) return; @@ -325,13 +319,7 @@ static inline void account_group_user_time(struct task_struct *tsk, static inline void account_group_system_time(struct task_struct *tsk, cputime_t cputime) { - struct thread_group_cputimer *cputimer; - - /* tsk == current, ensure it is safe to use ->signal */ - if (unlikely(tsk->exit_state)) - return; - - cputimer = &tsk->signal->cputimer; + struct thread_group_cputimer *cputimer = &tsk->signal->cputimer; if (!cputimer->running) return; @@ -355,16 +343,7 @@ static inline void account_group_system_time(struct task_struct *tsk, static inline void account_group_exec_runtime(struct task_struct *tsk, unsigned long long ns) { - struct thread_group_cputimer *cputimer; - struct signal_struct *sig; - - sig = tsk->signal; - /* see __exit_signal()->task_rq_unlock_wait() */ - barrier(); - if (unlikely(!sig)) - return; - - cputimer = &sig->cputimer; + struct thread_group_cputimer *cputimer = &tsk->signal->cputimer; if (!cputimer->running) return; -- cgit v1.2.2 From bfac7009180901f57f20a73c53c3e57b1ce75a1b Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 11 Jun 2010 01:09:56 +0200 Subject: sched: thread_group_cputime: Simplify, document the "alive" check thread_group_cputime() looks as if it is rcu-safe, but in fact this was wrong until ea6d290c which pins task->signal to task_struct. It checks ->sighand != NULL under rcu, but this can't help if ->signal can go away. Fortunately the caller either holds ->siglock, or it is fastpath_timer_check() which uses current and checks exit_state == 0. - Since ea6d290c commit tsk->signal is stable, we can read it first and avoid the initialization from INIT_CPUTIME. - Even if tsk->signal is always valid, we still have to check it is safe to use next_thread() under rcu_read_lock(). Currently the code checks ->sighand != NULL, change it to use pid_alive() which is commonly used to ensure the task wasn't unhashed before we take rcu_read_lock(). Add the comment to explain this check. - Change the main loop to use the while_each_thread() helper. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100610230956.GA25921@redhat.com> Signed-off-by: Ingo Molnar --- kernel/posix-cpu-timers.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 9829646d399c..bf2a6502860a 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -232,31 +232,24 @@ static int cpu_clock_sample(const clockid_t which_clock, struct task_struct *p, void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times) { - struct sighand_struct *sighand; - struct signal_struct *sig; + struct signal_struct *sig = tsk->signal; struct task_struct *t; - *times = INIT_CPUTIME; + times->utime = sig->utime; + times->stime = sig->stime; + times->sum_exec_runtime = sig->sum_sched_runtime; rcu_read_lock(); - sighand = rcu_dereference(tsk->sighand); - if (!sighand) + /* make sure we can trust tsk->thread_group list */ + if (!likely(pid_alive(tsk))) goto out; - sig = tsk->signal; - t = tsk; do { times->utime = cputime_add(times->utime, t->utime); times->stime = cputime_add(times->stime, t->stime); times->sum_exec_runtime += t->se.sum_exec_runtime; - - t = next_thread(t); - } while (t != tsk); - - times->utime = cputime_add(times->utime, sig->utime); - times->stime = cputime_add(times->stime, sig->stime); - times->sum_exec_runtime += sig->sum_sched_runtime; + } while_each_thread(tsk, t); out: rcu_read_unlock(); } -- cgit v1.2.2 From 0bdd2ed4138ec04e09b4f8165981efc99e439f55 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 11 Jun 2010 01:10:18 +0200 Subject: sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand() run_posix_cpu_timers() doesn't work if current has already passed exit_notify(). This was needed to prevent the races with do_wait(). Since ea6d290c ->signal is always valid and can't go away. We can remove the "tsk->exit_state == 0" in fastpath_timer_check() and convert run_posix_cpu_timers() to use lock_task_sighand(). Note: it makes sense to take group_leader's sighand instead, the sub-thread still uses CPU after release_task(). But we need more changes to do this. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100610231018.GA25942@redhat.com> Signed-off-by: Ingo Molnar --- kernel/posix-cpu-timers.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index bf2a6502860a..d5dbef5e89e6 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1272,10 +1272,6 @@ static inline int fastpath_timer_check(struct task_struct *tsk) { struct signal_struct *sig; - /* tsk == current, ensure it is safe to use ->signal/sighand */ - if (unlikely(tsk->exit_state)) - return 0; - if (!task_cputime_zero(&tsk->cputime_expires)) { struct task_cputime task_sample = { .utime = tsk->utime, @@ -1308,6 +1304,7 @@ void run_posix_cpu_timers(struct task_struct *tsk) { LIST_HEAD(firing); struct k_itimer *timer, *next; + unsigned long flags; BUG_ON(!irqs_disabled()); @@ -1318,7 +1315,8 @@ void run_posix_cpu_timers(struct task_struct *tsk) if (!fastpath_timer_check(tsk)) return; - spin_lock(&tsk->sighand->siglock); + if (!lock_task_sighand(tsk, &flags)) + return; /* * Here we take off tsk->signal->cpu_timers[N] and * tsk->cpu_timers[N] all the timers that are firing, and @@ -1340,7 +1338,7 @@ void run_posix_cpu_timers(struct task_struct *tsk) * that gets the timer lock before we do will give it up and * spin until we've taken care of that timer below. */ - spin_unlock(&tsk->sighand->siglock); + unlock_task_sighand(tsk, &flags); /* * Now that all the timers on our list have the firing flag, -- cgit v1.2.2 From 8d1f431cbec115a780cd551ab1b4955c125f8d31 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 11 Jun 2010 20:04:46 +0200 Subject: sched: Fix the racy usage of thread_group_cputimer() in fastpath_timer_check() fastpath_timer_check()->thread_group_cputimer() is racy and unneeded. It is racy because another thread can clear ->running before thread_group_cputimer() takes cputimer->lock. In this case thread_group_cputimer() will set ->running = true again and call thread_group_cputime(). But since we do not hold tasklist or siglock, we can race with fork/exit and copy the wrong results into cputimer->cputime. It is unneeded because if ->running == true we can just use the numbers in cputimer->cputime we already have. Change fastpath_timer_check() to copy cputimer->cputime into the local variable under cputimer->lock. We do not re-check ->running under cputimer->lock, run_posix_cpu_timers() does this check later. Note: we can add more optimizations on top of this change. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100611180446.GA13025@redhat.com> Signed-off-by: Ingo Molnar --- kernel/posix-cpu-timers.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index d5dbef5e89e6..f66bdd33a6c6 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1287,7 +1287,10 @@ static inline int fastpath_timer_check(struct task_struct *tsk) if (sig->cputimer.running) { struct task_cputime group_sample; - thread_group_cputimer(tsk, &group_sample); + spin_lock(&sig->cputimer.lock); + group_sample = sig->cputimer.cputime; + spin_unlock(&sig->cputimer.lock); + if (task_cputime_expired(&group_sample, &sig->cputime_expires)) return 1; } -- cgit v1.2.2 From 0b2e918aa99fe6c3b8f163aa323a275ad8577828 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 21 Jun 2010 23:53:31 +0200 Subject: sched, cpuset: Drop __cpuexit from cpu hotplug callbacks Commit 3a101d05 (sched: adjust when cpu_active and cpuset configurations are updated during cpu on/offlining) added hotplug notifiers marked with __cpuexit; however, ia64 drops text in __cpuexit during link unlike x86. This means that functions which are referenced during init but used only for cpu hot unplugging afterwards shouldn't be marked with __cpuexit. Drop __cpuexit from those functions. Reported-by: Tony Luck Signed-off-by: Tejun Heo Acked-by: Tony Luck Cc: Peter Zijlstra LKML-Reference: <4C1FDF5B.1040301@kernel.org> Signed-off-by: Ingo Molnar --- kernel/cpuset.c | 2 +- kernel/sched.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 05727dcaa80d..7146793b5c11 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -2118,7 +2118,7 @@ static void scan_for_empty_cpusets(struct cpuset *root) * Called within get_online_cpus(). Needs to call cgroup_lock() * before calling generate_sched_domains(). */ -void __cpuexit cpuset_update_active_cpus(void) +void cpuset_update_active_cpus(void) { struct sched_domain_attr *attr; cpumask_var_t *doms; diff --git a/kernel/sched.c b/kernel/sched.c index b4427cc70acd..9064e7d6ad65 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7477,8 +7477,8 @@ int __init sched_create_sysfs_power_savings_entries(struct sysdev_class *cls) * disabled, cpuset_update_active_cpus() becomes a simple wrapper * around partition_sched_domains(). */ -static int __cpuexit cpuset_cpu_active(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action, + void *hcpu) { switch (action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: @@ -7490,8 +7490,8 @@ static int __cpuexit cpuset_cpu_active(struct notifier_block *nfb, } } -static int __cpuexit cpuset_cpu_inactive(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action, + void *hcpu) { switch (action & ~CPU_TASKS_FROZEN) { case CPU_DOWN_PREPARE: -- cgit v1.2.2 From 2ec57d448b2e8fcfba539a46701b43f14f037f17 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 29 Jun 2010 12:02:01 +1000 Subject: sched: Fix spelling of sibling No logic changes, only spelling. Signed-off-by: Michael Neuling Cc: linuxppc-dev@ozlabs.org Cc: David Howells Cc: Peter Zijlstra LKML-Reference: <15249.1277776921@neuling.org> Signed-off-by: Ingo Molnar --- arch/powerpc/kernel/process.c | 2 +- include/linux/topology.h | 2 +- kernel/sched_fair.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 9b41ece010b6..22f08cb7e7d1 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1270,7 +1270,7 @@ unsigned long randomize_et_dyn(unsigned long base) } #ifdef CONFIG_SMP -int arch_sd_sibiling_asym_packing(void) +int arch_sd_sibling_asym_packing(void) { if (cpu_has_feature(CPU_FTR_ASYM_SMT)) { printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n"); diff --git a/include/linux/topology.h b/include/linux/topology.h index cf57f30d0dcb..b572e432d2f3 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -103,7 +103,7 @@ int arch_update_cpu_topology(void); | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ | 0*SD_PREFER_SIBLING \ - | arch_sd_sibiling_asym_packing() \ + | arch_sd_sibling_asym_packing() \ , \ .last_balance = jiffies, \ .balance_interval = 1, \ diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 5e8f98c103fb..b4da534f4b8c 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2567,7 +2567,7 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu, } while (sg != sd->groups); } -int __weak arch_sd_sibiling_asym_packing(void) +int __weak arch_sd_sibling_asym_packing(void) { return 0*SD_ASYM_PACKING; } -- cgit v1.2.2 From 5343bdb8fd076f16edc9d113a9e35e2a1d1f4966 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 9 Jul 2010 15:19:54 +0200 Subject: sched: Update rq->clock for nohz balanced cpus Suresh spotted that we don't update the rq->clock in the nohz load-balancer path. Signed-off-by: Peter Zijlstra LKML-Reference: <1278626014.2834.74.camel@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index b4da534f4b8c..e44a591531a1 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -3596,6 +3596,7 @@ static void nohz_idle_balance(int this_cpu, enum cpu_idle_type idle) } raw_spin_lock_irq(&this_rq->lock); + update_rq_clock(this_rq); update_cpu_load(this_rq); raw_spin_unlock_irq(&this_rq->lock); -- cgit v1.2.2 From bbc8cb5baead9607309583b20873ab0cc8d89eaf Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 9 Jul 2010 15:15:43 +0200 Subject: sched: Reduce update_group_power() calls Currently we update cpu_power() too often, update_group_power() only updates the local group's cpu_power but it gets called for all groups. Furthermore, CPU_NEWLY_IDLE invocations will result in all cpus calling it, even though a slow update of cpu_power is sufficient. Therefore move the update under 'idle != CPU_NEWLY_IDLE && local_group' to reduce superfluous invocations. Reported-by: Venkatesh Pallipadi Signed-off-by: Peter Zijlstra Acked-by: Suresh Siddha LKML-Reference: <1278612989.1900.176.camel@laptop> Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index e44a591531a1..c9ac09760953 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2425,14 +2425,14 @@ static inline void update_sg_lb_stats(struct sched_domain *sd, * domains. In the newly idle case, we will allow all the cpu's * to do the newly idle load balance. */ - if (idle != CPU_NEWLY_IDLE && local_group && - balance_cpu != this_cpu) { - *balance = 0; - return; + if (idle != CPU_NEWLY_IDLE && local_group) { + if (balance_cpu != this_cpu) { + *balance = 0; + return; + } + update_group_power(sd, this_cpu); } - update_group_power(sd, this_cpu); - /* Adjust by relative CPU power of the group */ sgs->avg_load = (sgs->group_load * SCHED_LOAD_SCALE) / group->cpu_power; -- cgit v1.2.2 From 396e894d289d69bacf5acd983c97cd6e21a14c08 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 9 Jul 2010 15:12:27 +0200 Subject: sched: Revert nohz_ratelimit() for now Norbert reported that nohz_ratelimit() causes his laptop to burn about 4W (40%) extra. For now back out the change and see if we can adjust the power management code to make better decisions. Reported-by: Norbert Preining Signed-off-by: Peter Zijlstra Acked-by: Mike Galbraith Cc: Arjan van de Ven LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 6 ------ kernel/sched.c | 10 ---------- kernel/time/tick-sched.c | 2 +- 3 files changed, 1 insertion(+), 17 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 747fcaedddb7..6e0bb86de990 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -273,17 +273,11 @@ extern cpumask_var_t nohz_cpu_mask; #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ) extern int select_nohz_load_balancer(int cpu); extern int get_nohz_load_balancer(void); -extern int nohz_ratelimit(int cpu); #else static inline int select_nohz_load_balancer(int cpu) { return 0; } - -static inline int nohz_ratelimit(int cpu) -{ - return 0; -} #endif /* diff --git a/kernel/sched.c b/kernel/sched.c index f52a8801b7a2..63b4a14682fa 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1232,16 +1232,6 @@ void wake_up_idle_cpu(int cpu) smp_send_reschedule(cpu); } -int nohz_ratelimit(int cpu) -{ - struct rq *rq = cpu_rq(cpu); - u64 diff = rq->clock - rq->nohz_stamp; - - rq->nohz_stamp = rq->clock; - - return diff < (NSEC_PER_SEC / HZ) >> 1; -} - #endif /* CONFIG_NO_HZ */ static u64 sched_avg_period(void) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 813993b5fb61..f898af608171 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -325,7 +325,7 @@ void tick_nohz_stop_sched_tick(int inidle) } while (read_seqretry(&xtime_lock, seq)); if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) || - arch_needs_cpu(cpu) || nohz_ratelimit(cpu)) { + arch_needs_cpu(cpu)) { next_jiffies = last_jiffies + 1; delta_jiffies = 1; } else { -- cgit v1.2.2 From 68c38fc3cb4e5a60f502ee9c45f3dfe70e5165ad Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 15 Jul 2010 23:18:22 +0300 Subject: sched: No need for bootmem special cases As of commit dcce284 ("mm: Extend gfp masking to the page allocator") and commit 7e85ee0 ("slab,slub: don't enable interrupts during early boot"), the slab allocator makes sure we don't attempt to sleep during boot. Therefore, remove bootmem special cases from the scheduler and use plain GFP_KERNEL instead. Signed-off-by: Pekka Enberg Cc: Peter Zijlstra LKML-Reference: <1279225102-2572-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar --- kernel/sched.c | 19 +++++++------------ kernel/sched_cpupri.c | 8 ++------ kernel/sched_cpupri.h | 2 +- 3 files changed, 10 insertions(+), 19 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 9064e7d6ad65..7b443ee27be4 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6248,23 +6248,18 @@ static void rq_attach_root(struct rq *rq, struct root_domain *rd) free_rootdomain(old_rd); } -static int init_rootdomain(struct root_domain *rd, bool bootmem) +static int init_rootdomain(struct root_domain *rd) { - gfp_t gfp = GFP_KERNEL; - memset(rd, 0, sizeof(*rd)); - if (bootmem) - gfp = GFP_NOWAIT; - - if (!alloc_cpumask_var(&rd->span, gfp)) + if (!alloc_cpumask_var(&rd->span, GFP_KERNEL)) goto out; - if (!alloc_cpumask_var(&rd->online, gfp)) + if (!alloc_cpumask_var(&rd->online, GFP_KERNEL)) goto free_span; - if (!alloc_cpumask_var(&rd->rto_mask, gfp)) + if (!alloc_cpumask_var(&rd->rto_mask, GFP_KERNEL)) goto free_online; - if (cpupri_init(&rd->cpupri, bootmem) != 0) + if (cpupri_init(&rd->cpupri) != 0) goto free_rto_mask; return 0; @@ -6280,7 +6275,7 @@ out: static void init_defrootdomain(void) { - init_rootdomain(&def_root_domain, true); + init_rootdomain(&def_root_domain); atomic_set(&def_root_domain.refcount, 1); } @@ -6293,7 +6288,7 @@ static struct root_domain *alloc_rootdomain(void) if (!rd) return NULL; - if (init_rootdomain(rd, false) != 0) { + if (init_rootdomain(rd) != 0) { kfree(rd); return NULL; } diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c index e6871cb3fc83..2722dc1b4138 100644 --- a/kernel/sched_cpupri.c +++ b/kernel/sched_cpupri.c @@ -166,14 +166,10 @@ void cpupri_set(struct cpupri *cp, int cpu, int newpri) * * Returns: -ENOMEM if memory fails. */ -int cpupri_init(struct cpupri *cp, bool bootmem) +int cpupri_init(struct cpupri *cp) { - gfp_t gfp = GFP_KERNEL; int i; - if (bootmem) - gfp = GFP_NOWAIT; - memset(cp, 0, sizeof(*cp)); for (i = 0; i < CPUPRI_NR_PRIORITIES; i++) { @@ -181,7 +177,7 @@ int cpupri_init(struct cpupri *cp, bool bootmem) raw_spin_lock_init(&vec->lock); vec->count = 0; - if (!zalloc_cpumask_var(&vec->mask, gfp)) + if (!zalloc_cpumask_var(&vec->mask, GFP_KERNEL)) goto cleanup; } diff --git a/kernel/sched_cpupri.h b/kernel/sched_cpupri.h index 7cb5bb6b95be..9fc7d386fea4 100644 --- a/kernel/sched_cpupri.h +++ b/kernel/sched_cpupri.h @@ -27,7 +27,7 @@ struct cpupri { int cpupri_find(struct cpupri *cp, struct task_struct *p, struct cpumask *lowest_mask); void cpupri_set(struct cpupri *cp, int cpu, int pri); -int cpupri_init(struct cpupri *cp, bool bootmem); +int cpupri_init(struct cpupri *cp); void cpupri_cleanup(struct cpupri *cp); #else #define cpupri_set(cp, cpu, pri) do { } while (0) -- cgit v1.2.2 From eebef74695e1498e04e5f85be9c6f84bd2e7358a Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Mon, 19 Jul 2010 12:31:16 -0700 Subject: sched: Use correct macro to display sched_child_runs_first in /proc/sched_debug The sched_child_runs_first value in /proc/sched_debug is currently displayed using a macro meant to split ns time values. This patch uses the correct macro to display it as a plain decimal value. Signed-off-by: Josh Hunt Cc: peterz@infradead.org Cc: juhlenko@akamai.com Cc: efault@gmx.de LKML-Reference: <1279567876-25418-1-git-send-email-johunt@akamai.com> Signed-off-by: Ingo Molnar --- kernel/sched_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 35565395d00d..2e1b0d17dd9b 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -332,7 +332,7 @@ static int sched_debug_show(struct seq_file *m, void *v) PN(sysctl_sched_latency); PN(sysctl_sched_min_granularity); PN(sysctl_sched_wakeup_granularity); - PN(sysctl_sched_child_runs_first); + P(sysctl_sched_child_runs_first); P(sysctl_sched_features); #undef PN #undef P -- cgit v1.2.2