From c3777c19d26cbd5a3e48c63602ac1a527c3175db Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Mon, 2 Aug 2010 13:18:00 +0300 Subject: omap: zoom3: wlan board muxing Add board muxing to support the wlan wl1271 chip that is hardwired to mmc2 (third mmc controller) on the ZOOM3. Signed-off-by: Ohad Ben-Cohen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-zoom3.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 33147042485f..7d1704693acb 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -46,6 +46,19 @@ static void __init omap_zoom_init_irq(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* WLAN IRQ - GPIO 162 */ + OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + /* WLAN POWER ENABLE - GPIO 101 */ + OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* WLAN SDIO: MMC3 CMD */ + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC3 CLK */ + OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC3 DAT[0-3] */ + OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else -- cgit v1.2.2